Stratified charge rotary engine critical technology enablement. Volume 2: Appendixes

NASA Technical Reports Server (NTRS)

Irion, C. E.; Mount, R. E.

1992-01-01

This second volume of appendixes is a companion to Volume 1 of this report which summarizes results of a critical technology enablement effort with the stratified charge rotary engine (SCRE) focusing on a power section of 0.67 liters (40 cu. in.) per rotor in single and two rotor versions. The work is a continuation of prior NASA Contracts NAS3-23056 and NAS3-24628. Technical objectives are multi-fuel capability, including civil and military jet fuel and DF-2, fuel efficiency of 0.355 Lbs/BHP-Hr. at best cruise condition above 50 percent power, altitude capability of up to 10Km (33,000 ft.) cruise, 2000 hour TBO and reduced coolant heat rejection. Critical technologies for SCRE's that have the potential for competitive performance and cost in a representative light-aircraft environment were examined. Objectives were: the development and utilization of advanced analytical tools, i.e. higher speed and enhanced three dimensional combustion modeling; identification of critical technologies; development of improved instrumentation; and to isolate and quantitatively identify the contribution to performance and efficiency of critical components or subsystems. A family of four-stage third-order explicit Runge-Kutta schemes is derived that required only two locations and has desirable stability characteristics. Error control is achieved by embedding a second-order scheme within the four-stage procedure. Certain schemes are identified that are as efficient and accurate as conventional embedded schemes of comparable order and require fewer storage locations.

Materials, critical materials and clean-energy technologies

NASA Astrophysics Data System (ADS)

Eggert, R.

2017-07-01

Modern engineered materials, components and systems depend on raw materials whose properties provide essential functionality to these technologies. Some of these raw materials are subject to supply-chain risks, and such materials are known as critical materials. This paper reviews corporate, national and world perspectives on material criticality. It then narrows its focus to studies that assess "what is critical" to clean-energy technologies. The focus on supply-chain risks is not meant to be alarmist but rather to encourage attention to monitoring these risks and pursuing technological innovation to mitigate the risks.

Unobtainium? Critical Elements for New Energy Technologies

NASA Astrophysics Data System (ADS)

Jaffe, Robert

2011-03-01

I will report on a recently completed study jointly sponsored by the APS Panel on Public Affairs (POPA) and the Material Research Society (MRS). The twin pressures of increasing demand for energy and increasing concern about anthropogenic climate change have stimulated research into new sources of energy and novel ways to harvest, transmit, store, transform or conserve it. At the same time, advances in physics, chemistry, and material science have enabled researchers to identify chemical elements with properties that can be finely tuned to their specific needs and to employ them in new energy-related technologies. Elements like dysprosium, gallium, germanium, indium, lanthanum, neodymium, rhenium, or tellurium, which were once laboratory curiosities, now figure centrally when novel energy systems are discussed. Many of these elements are not at present mined, refined, or traded in large quantities. However new technologies can only impact our energy needs if they can be scaled from laboratory, to demonstration, to massive implementation. As a result, some previously unfamiliar elements will be needed in great quantities. We refer to these elements as energy-critical elements (ECEs). Although the technologies in which they are employed and their abundance in the Earth's crust vary greatly, ECEs have many features in common. The purpose of the POPA/MRS study was to evaluate constraints on availability of energy-critical elements and to make recommendations that can help avoid these obstructions.

Identifying Critical Cross-Cultural School Psychology Competencies.

ERIC Educational Resources Information Center

Rogers, Margaret R.; Lopez, Emilia C.

2002-01-01

Study sought to identify critical cross-cultural competencies for school psychologists. To identify the competencies, an extensive literature search about cross-cultural school psychology competencies was conducted, as well as a questionnaire to ask expert panelists. The 102 competencies identified cover 14 major domains of professional activities…

Double Infusion: Toward a Process of Articulation between Critical Multicultural Education and Technology Education in a Teacher Preparation Program

ERIC Educational Resources Information Center

McShay, James

2005-01-01

This paper describes the goals of critical multicultural education in the USA and identifies current challenges working to impede its infusion within technology teacher education programs. It offers both technology and multicultural teacher educators a model for infusion of both critical multicultural perspectives and technology into their…

Critical thinking instruction and technology enhanced learning from the student perspective: A mixed methods research study.

PubMed

Swart, Ruth

2017-03-01

Critical thinking is acclaimed as a valuable asset for graduates from higher education programs. Technology has advanced in quantity and quality; recognized as a requirement of 21st century learners. A mixed methods research study was undertaken, examining undergraduate nursing student engagement with critical thinking instruction, platformed on two technology-enhanced learning environments: a classroom response system face-to-face in-class and an online discussion forum out-of-class. The Community of Inquiry framed the study capturing constructivist collaborative inquiry to support learning, and facilitate critical thinking capability. Inclusion of quantitative and qualitative data sources aimed to gather a comprehensive understanding of students' development of critical thinking and engagement with technology-enhanced learning. The findings from the students' perspectives were positive toward the inclusion of technology-enhanced learning, and use in supporting their development of critical thinking. Students considered the use of two forms of technology beneficial in meeting different needs and preferences, offering varied means to actively participate in learning. They valued critical thinking instruction being intentionally aligned with subject-specific content facilitating understanding, application, and relevance of course material. While the findings are limited to student participants, the instructional strategies and technology-enhanced learning identified as beneficial can inform course design for the development of critical thinking. Copyright © 2017 Elsevier Ltd. All rights reserved.

Critical gases for critical issues: CO2 technologies for oral drug delivery.

PubMed

Danan, Hana; Esposito, Pierandrea

2014-02-01

In recent years, CO2-based technologies have gained considerable interest in the pharmaceutical industry for their potential applications in drug formulation and drug delivery. The exploitation of peculiar properties of gases under supercritical conditions has been studied in the last 20 years with mixed results. Promising drug-delivery technologies, based on supercritical CO2, have mostly failed when facing challenges of industrial scaleability and economical viability. Nevertheless, a 'second generation' of processes, based on CO2 around and below critical point has been developed, possibly offering technology-based solutions to some of the current issues of pharmaceutical development. In this review, we highlight the most recent advancements in this field, with a particular focus on the potential of CO2-based technologies in addressing critical issues in oral delivery, and briefly discuss the future perspectives of dense CO2-assisted processes as enabling technologies in drug delivery.

Critical soft landing technology issues for future US space missions

NASA Technical Reports Server (NTRS)

Macha, J. M.; Johnson, D. W.; Mcbride, D. D.

1992-01-01

A programmatic need for research and development to support parachute-based landing systems has not existed since the end of the Apollo missions in the mid-1970s. Now, a number of planned space programs require advanced landing capabilities for which the experience and technology base does not currently exist. New requirements for landing on land with controllable, gliding decelerators and for more effective impact attenuation devices justify a renewal of the landing technology development effort that existed during the Mercury, Gemini, and Apollo programs. A study was performed to evaluate the current and projected national capability in landing systems and to identify critical deficiencies in the technology base required to support the Assured Crew Return Vehicle and the Two-Way Manned Transportation System. A technology development program covering eight landing system performance issues is recommended.

Technology-Critical Elements: Economic and Policy Perspectives

NASA Astrophysics Data System (ADS)

Eggert, R. G.

2017-12-01

Critical elements are those that provide essential functionality to modern engineered materials, have few ready substitutes and are subject to supply-chain risks or concerns about long-run availability. This paper provides economic and public-policy perspectives on critical elements. It suggests: that which elements are critical is situational and changes over time; that we are not running out of mineral-derived raw materials in a geologic sense but rather, for some elements, face scarcities that are technological, environmental, political or economic in nature; and that public policy's most important role over the longer term is fostering scientific and technological innovation, especially early stage research, that has the potential to overcome these scarcities.

Astrophysics space systems critical technology needs

NASA Technical Reports Server (NTRS)

Gartrell, C. F.

1982-01-01

This paper addresses an independent assessment of space system technology needs for future astrophysics flight programs contained within the NASA Space Systems Technology Model. The critical examination of the system needs for the approximately 30 flight programs in the model are compared to independent technology forecasts and possible technology deficits are discussed. These deficits impact the developments needed for spacecraft propulsion, power, materials, structures, navigation, guidance and control, sensors, communications and data processing. There are also associated impacts upon in-orbit assembly technology and space transportation systems. A number of under-utilized technologies are highlighted which could be exploited to reduce cost and enhance scientific return.

Identifying and Prioritizing Critical Hardwood Resources

Treesearch

Sam C. Doak; Sharon Johnson; Marlyce Myers

1991-01-01

A logical framework is required to provide a focus for the implementation of a variety of landowner incentive techniques in accordance with existing goals to protect and enhance hardwood resources. A system is presented for identifying and prioritizing critical hardwood resources for site specific conservation purposes. Flexibility is built into this system so that...

Identifying Critical Manufacturing Technologies Required for Transforming the Army Industrial Base

DTIC Science & Technology

2014-04-01

mechanism, 1 = least common mechanism)? ................................................................... 29 Figure 5 – Which Technology “ Test Beds...facilities, produce new designs , and incorporate efficient manufacturing processes. The value and continued success of the Army Industrial Base depends on...in materiel supplies to troops. Specific programs, described in AR 700-09, that are designed to transition manufacturing technology into the Army

Towards a Critical Theory of Educational Technology

ERIC Educational Resources Information Center

Okan, Zuhal

2007-01-01

The purpose of this study is to offer a critical consideration of current initiatives, and common sense discourses, forcing educators to adopt and integrate educational technology on a large scale. This study argues that it is time, in the relative absence of a critical debate, to ask questions that should precede a wholesale adoption of…

A Critical Approach To Teaching Educational Technology.

ERIC Educational Resources Information Center

Nichols, Randall G.

In this paper, an educational technologist describes his critical approach to using computers in instruction. He discusses his development from high school English teacher to educational technology instructor in a university setting, focusing on people, literature, and films that have shaped his view of technology as well as on his disappointment…

Protecting Defense Technologies: DOD Assessment Needed to Determine Requirement for Critical Technologies List

DTIC Science & Technology

2013-01-01

Service DTSA Defense Technology Security Administration MCTL Militarily Critical Technologies List This is a work of the U.S. government and is not...Respond to MCTL Weaknesses Page 8 GAO-13-157 Protecting Defense Technologies Administration ( DTSA ), military services, and DOD...implementation of technology security policies on international transfers of defense- related goods, services, and technologies; • directed DTSA to

Identifying Advanced Technologies for Education's Future.

ERIC Educational Resources Information Center

Moore, Gwendolyn B.; Yin, Robert K.

A study to determine how three advanced technologies might be applied to the needs of special education students helped inspire the development of a new method for identifying such applications. This new method, named the "Hybrid Approach," combines features of the two traditional methods: technology-push and demand-pull. Technology-push involves…

Medical sociology and technology: critical engagements.

PubMed

Casper, Monica J; Morrison, Daniel R

2010-01-01

In this selective review of the literature on medical sociology's engagement with technology, we outline the concurrent developments of the American Sociological Association section on medicine and advances in medical treatment. We then describe theoretical and epistemological issues with scholars' treatment of technology in medicine. Using symbolic interactionist concepts, as well as work from the interdisciplinary field of science and technology studies, we review and synthesize critical connections in and across sociology's intellectual relationship with medical technology. Next, we discuss key findings in these literatures, noting a shift from a focus on the effects of technology on practice to a reconfiguration of human bodies. We also look toward the future, focusing on connections between technoscientific identities and embodied health movements. Finally, we call for greater engagement by medical sociologists in studying medical technology and the process of policy-making--two areas central to debates in health economics and public policy.

The role of surgeons in identifying emerging technologies for health technology assessment.

PubMed

Stafinski, Tania; Topfer, Leigh-Ann; Zakariasen, Ken; Menon, Devidas

2010-04-01

Health technology assessment (HTA) is a tool intended to help policy-makers decide which technologies to fund. However, given the proliferation of new technologies, it is not possible to undertake an HTA of each one before it becomes funded. Consequently, "horizon-scanning" processes have been developed to identify emerging technologies that are likely to have a substantial impact on clinical practice. Although the importance of physicians in the adoption of new technologies is well recognized, their role in horizon scanning in Canada has been limited. The purpose of this project was to pilot an approach to engage physicians, specifically surgeons, in provincial horizon-scanning activities. We invited 18 surgeons from Alberta's 2 medical schools to a horizon-scanning workshop to solicit their views on emerging technologies expected to impact surgical practice within the next 5 years and/or the importance of different attributes or characteristics of new technologies. Surgeons, regardless of specialty, identified developments designed to enhance existing minimally invasive surgical techniques, such as endoscopic, robotic and image-guided surgery. Several nonsurgical areas, including molecular genetics and nano technology, were also identified. Of the 13 technology attributes discussed, safety or risk, effectiveness and feasibility were rated as most important. Lastly, participating surgeons expressed an interest in becoming further involved in local HTA initiatives. Surgeons, as adopters and users of health technologies, represent an important and accessible information source for identifying emerging technologies for HTA. A more formal, ongoing relationship between the government, HTA and surgeons may help to optimize the use of HTA resources.

The role of surgeons in identifying emerging technologies for health technology assessment

PubMed Central

Stafinski, Tania; Topfer, Leigh-Ann; Zakariasen, Ken; Menon, Devidas

2010-01-01

Background Health technology assessment (HTA) is a tool intended to help policy-makers decide which technologies to fund. However, given the proliferation of new technologies, it is not possible to undertake an HTA of each one before it becomes funded. Consequently, “horizon-scanning” processes have been developed to identify emerging technologies that are likely to have a substantial impact on clinical practice. Although the importance of physicians in the adoption of new technologies is well recognized, their role in horizon scanning in Canada has been limited. The purpose of this project was to pilot an approach to engage physicians, specifically surgeons, in provincial horizon-scanning activities. Methods We invited 18 surgeons from Alberta’s 2 medical schools to a horizon-scanning workshop to solicit their views on emerging technologies expected to impact surgical practice within the next 5 years and/or the importance of different attributes or characteristics of new technologies. Results Surgeons, regardless of specialty, identified developments designed to enhance existing minimally invasive surgical techniques, such as endoscopic, robotic and image-guided surgery. Several nonsurgical areas, including molecular genetics and nanotechnology, were also identified. Of the 13 technology attributes discussed, safety or risk, effectiveness and feasibility were rated as most important. Lastly, participating surgeons expressed an interest in becoming further involved in local HTA initiatives. Conclusion Surgeons, as adopters and users of health technologies, represent an important and accessible information source for identifying emerging technologies for HTA. A more formal, ongoing relationship between the government, HTA and surgeons may help to optimize the use of HTA resources. PMID:20334740

Proceedings of the Nuclear Criticality Technology Safety Workshop

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rene G. Sanchez

1998-04-01

This document contains summaries of most of the papers presented at the 1995 Nuclear Criticality Technology Safety Project (NCTSP) meeting, which was held May 16 and 17 at San Diego, Ca. The meeting was broken up into seven sessions, which covered the following topics: (1) Criticality Safety of Project Sapphire; (2) Relevant Experiments For Criticality Safety; (3) Interactions with the Former Soviet Union; (4) Misapplications and Limitations of Monte Carlo Methods Directed Toward Criticality Safety Analyses; (5) Monte Carlo Vulnerabilities of Execution and Interpretation; (6) Monte Carlo Vulnerabilities of Representation; and (7) Benchmark Comparisons.

Critical Metals in Strategic Low-carbon Energy Technologies

NASA Astrophysics Data System (ADS)

Moss, R. L.

2012-04-01

Due to the rapid growth in demand for certain materials, compounded by political risks associated with the geographical concentration of the supply of them, shortages of materials could be a potential bottleneck to the deployment of low-carbon energy technologies. Consequently, an assessment has been carried out to ascertain whether such shortages could jeopardise the objectives of the EU's Strategic Energy Technology Plan (SET-Plan), especially in the six low-carbon energy technologies of SET-Plan, namely: nuclear, solar, wind, bioenergy, carbon capture and storage (CCS) and electricity grids. The assessment identified 14 metals for which the deployment of the six technologies will require 1% or more (and in some cases, much more) of current world supply per annum between 2020 and 2030. Following a more critical examination, based on the likelihood of rapid future global demand growth, limitations to expanding supply in the short to medium term, and the concentration of supply and political risks associated with key suppliers, 5 of the 14 metals were pinpointed to be at high risk, namely: the rare earth metals neodymium and dysprosium (for wind technology), and the by-products (from the processing of other metals) indium, tellurium and gallium (for photovoltaic technologies). In addition, the work has explored potential mitigation strategies, ranging from expanding European output, increasing recycling and reuse to reducing waste and finding substitutes for these metals in their main applications. Furthermore, recommendations are provided which include closely working with the EU's Raw Materials Initiative; supporting efforts to ensure reliable supply of ore concentrates at competitive prices; promoting R&D and demonstration projects on new lower cost separation processes; and promoting the further development of recycling technologies and increasing end-of-life collection

New Forces at Work in Mining: Industry View of Critical Technologies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Peterson, D. J.; LaTourrette, Tom; Bartis, James T.

2007-04-01

RAND has just published a report entitled, "New Forces at Work in Mining: Industry Views of Critical Technologies," by D. J. Peterson, Tom LaTourrette, and James T. Bartis. The report presents the results of a series of in-depth discussions with leading mining industry representatives selected for their prominent position and their ability to think broadly about technology trends. The discussions highlighted the importance of collaborative technology research, development, and implementation strategies and the increasingly critical role of mine personnel in the utilization of new technologies.

Practitioner approaches to the integration of clinical decision support system technology in critical care.

PubMed

Weber, Scott; Crago, Elizabeth A; Sherwood, Paula R; Smith, Tara

2009-11-01

The aim of this study was to explore the experiences of nurses and physicians who use a clinical decision support system (CDSS) in the critical care area, focusing on clinicians' motives and values related to decisions to either use or not use this optional technology. Information technology (IT) has been demonstrated to positively impact quality of patient care. Decision-support technology serves as an adjunct to, not as a replacement for, actual clinical decision making. Nurse administrators play an imperative role in the planning and implementation of IT projects and can benefit from understanding clinicians' affective considerations and approaches to the technology. This qualitative study used grounded theory methods. A total of 33 clinicians participated in in-depth structured interviews probing their professional concerns with how the technology is used. Data were analyzed using the constant comparative method. Medical staff were frustrated by perceived lack of planning input before system implementation. Both nurse and physician cohort groups were dissatisfied with preimplementation education. Barriers to system use were identified in significant detail by the participants. Both nurses and physicians should be involved in preimplementation planning and ongoing evaluation of CDSSs. There is a need for a systematic review or Cochrane meta-analysis describing the affective aspects of successful implementations of decisional technology in critical care, specifically from the perspective of nursing administrators.

The challenges of caring in a technological environment: critical care nurses' experiences.

PubMed

McGrath, Mary

2008-04-01

This paper presents and discusses the findings from a phenomenological study which illuminated the lived experiences of experienced critical care nurses caring within a technological environment. While nursing practice is interwoven with technology, much of the literature in this area is speculative. Moreover, there is a debate as to whether and how 'high tech' and 'high touch' are reconcilable; this orientation is referred to as the optimism vs. pessimism debate. On a personal level, the motivation for this study came from the author's 13 years' experience in the critical care area. Following ethical approval, 10 experienced nurses from two cardiothoracic critical care units in Ireland participated in the study. A Heideggerian phenomenological methodology was used. Data collection consisted of unstructured interviews. A method of data analysis described by Walters was used. The findings provide research-based evidence to illuminate further the optimistic/pessimistic debate on technology in nursing. While the study demonstrates that the debate is far from resolved, it reveals a new finding: life-saving technology that supports the lives of critically ill patients can bring experienced nurses very close to their patients/families. The three main themes that emerged: 'alien environment', 'pulling together' and 'sharing the journey' were linked by a common thread of caring. Experienced critical care nurses are able to transcend the obtrusive nature of technology to deliver expert caring to their patients. However, the journey to proficiency in technology is very demanding and novice nurses have difficulty in caring with technology. Relevance to clinical practice. It is recommended that more emphasis be placed on supporting, assisting and educating inexperienced nurses in the critical care area and that the use of technology in nursing be given serious consideration.

Technology and Interactive Multimedia. Identifying Emerging Issues and Trends in Technology for Special Education.

ERIC Educational Resources Information Center

Ashton, Ray

As part of a 3-year study to identify emerging issues and trends in technology for special education, this paper addresses the role of interactive multimedia, especially the digital, optical compact disc technologies, in providing instructional services to special education students. An overview identifies technological and economic trends,…

Redefining the Federal Role of Public-Funded Environmental Research: Identifying Critical Attributes for Sustainability

DOE Office of Scientific and Technical Information (OSTI.GOV)

Boyd, Gerald G.; Sink, CLaire H.; Howes, Walter S.

2000-09-25

For the past fifty years, U.S. science and technology policy has been based on Vannevar Bush s classic report, Science--The Endless Frontier. As the U.S. enters the 21st century, public funding for environmental research and development (R&D) in achieving environmental sustainability is crucial to the nation s economic and overall well being. In domestic environmental remediation, the U.S. Department of Energy Office of Environmental Management (DOE EM) is committed to cleaning up DOE sites contaminated with radioactive, chemical, and other hazardous wastes. To best accomplish this mission amid fiscal and regulatory regimes and to promote long-term environmental sustainability requires improvedmore » interdisciplinary collaboration among R&D performers--universities, industry, and federal laboratories--as well as advances in environmental science and technology. Public funding for interdisciplinary long-term environmental R&D is essential as no long-term approach to environmental R&D exists. With increased awareness of the rapidity of global technological change and the impact of this change on humans and the earth s ecosystem, it is timely to identify, evaluate, and establish critical attributes as characteristics of long-term environmental sustainability for facilitating a broad science and technology policy. For environmental R&D, these attributes are functionally grouped into R&D performers, operational aspects, and technology-related aspects. Individually, each attribute addresses a specific need; collectively, they create a strategy to achieve long-term sustainability. Most of the attributes are commonplace in today s R&D community; the uniqueness is their integration into an overall system as suggested. Added value for environmental R&D would address the attributes collectively to provide overall synergy. As the U.S. enters the 21st century and adapts to increased globalization, addressing the consequences of humans and environmental interactions is

Powerpoint: An Overused Technology Deserving of Criticism, but Indispensable

ERIC Educational Resources Information Center

Hopper, Keith B.; Waugh, Jonathan B.

2014-01-01

PowerPoint is roundly reviled and ridiculed, yet this technology enjoys universal popularity. This article reviews the criticisms of PowerPoint and its peer technologies, describes its affordances and advantages, and suggests innovative PowerPoint applications in instruction. Beyond garden-variety applications of PowerPoint, it may also be used to…

Clustering analysis of water distribution systems: identifying critical components and community impacts.

PubMed

Diao, K; Farmani, R; Fu, G; Astaraie-Imani, M; Ward, S; Butler, D

2014-01-01

Large water distribution systems (WDSs) are networks with both topological and behavioural complexity. Thereby, it is usually difficult to identify the key features of the properties of the system, and subsequently all the critical components within the system for a given purpose of design or control. One way is, however, to more explicitly visualize the network structure and interactions between components by dividing a WDS into a number of clusters (subsystems). Accordingly, this paper introduces a clustering strategy that decomposes WDSs into clusters with stronger internal connections than external connections. The detected cluster layout is very similar to the community structure of the served urban area. As WDSs may expand along with urban development in a community-by-community manner, the correspondingly formed distribution clusters may reveal some crucial configurations of WDSs. For verification, the method is applied to identify all the critical links during firefighting for the vulnerability analysis of a real-world WDS. Moreover, both the most critical pipes and clusters are addressed, given the consequences of pipe failure. Compared with the enumeration method, the method used in this study identifies the same group of the most critical components, and provides similar criticality prioritizations of them in a more computationally efficient time.

Critical research and advanced technology (CRT) support project

NASA Technical Reports Server (NTRS)

Furman, E. R.; Anderson, D. N.; Hodge, P. E.; Lowell, C. E.; Nainiger, J. J.; Schultz, D. F.

1983-01-01

A critical technology base for utility and industrial gas turbines by planning the use of coal-derived fuels was studied. Development tasks were included in the following areas: (1) Combustion - investigate the combustion of coal-derived fuels and methods to minimize the conversion of fuel-bound nitrogen to NOx; (2) materials - understand and minimize hot corrosion; (3) system studies - integrate and focus the technological efforts. A literature survey of coal-derived fuels was completed and a NOx emissions model was developed. Flametube tests of a two-stage (rich-lean) combustor defined optimum equivalence ratios for minimizing NOx emissions. Sector combustor tests demonstrated variable air control to optimize equivalence ratios over a wide load range and steam cooling of the primary zone liner. The catalytic combustion of coal-derived fuels was demonstrated. The combustion of coal-derived gases is very promising. A hot-corrosion life prediction model was formulated and verified with laboratory testing of doped fuels. Fuel additives to control sulfur corrosion were studied. The intermittent application of barium proved effective. Advanced thermal barrier coatings were developed and tested. Coating failure modes were identified and new material formulations and fabrication parameters were specified. System studies in support of the thermal barrier coating development were accomplished.

The impact of advanced technology on critical care. Dilemmas in the making.

PubMed

Aarons, D E

1998-12-01

Advanced technology has enhanced our ability to diagnose and treat critically ill patients, thereby assisting in prolonging life for many. However, its high cost has been prohibitive, and it may impose more burdens than benefits on some patients. Although technological advances have accelerated social change, many have also fuelled legal and ethical concerns. Consequently, the rationale for the use of advanced technology in the care of critically ill patients should be clear and ethically justified.

Recombinase polymerase amplification: Emergence as a critical molecular technology for rapid, low-resource diagnostics.

PubMed

James, Ameh; Macdonald, Joanne

2015-01-01

Isothermal molecular diagnostics are bridging the technology gap between traditional diagnostics and polymerase chain reaction-based methods. These new techniques enable timely and accurate testing, especially in settings where there is a lack of infrastructure to support polymerase chain reaction facilities. Despite this, there is a significant lack of uptake of these technologies in developing countries where they are highly needed. Among these novel isothermal technologies, recombinase polymerase amplification (RPA) holds particular potential for use in developing countries. This rapid nucleic acid amplification approach is fast, highly sensitive and specific, and amenable to countries with a high burden of infectious diseases. Implementation of RPA technology in developing countries is critically required to assess limitations and potentials of the diagnosis of infectious disease, and may help identify impediments that prevent adoption of new molecular technologies in low resource- and low skill settings. This review focuses on approaching diagnosis of infectious disease with RPA.

The change in critical technologies for computational physics

NASA Technical Reports Server (NTRS)

Watson, Val

1990-01-01

It is noted that the types of technology required for computational physics are changing as the field matures. Emphasis has shifted from computer technology to algorithm technology and, finally, to visual analysis technology as areas of critical research for this field. High-performance graphical workstations tied to a supercommunicator with high-speed communications along with the development of especially tailored visualization software has enabled analysis of highly complex fluid-dynamics simulations. Particular reference is made here to the development of visual analysis tools at NASA's Numerical Aerodynamics Simulation Facility. The next technology which this field requires is one that would eliminate visual clutter by extracting key features of simulations of physics and technology in order to create displays that clearly portray these key features. Research in the tuning of visual displays to human cognitive abilities is proposed. The immediate transfer of technology to all levels of computers, specifically the inclusion of visualization primitives in basic software developments for all work stations and PCs, is recommended.

Thin Film Technology of High-Critical-Temperature Superconducting Electronics.

DTIC Science & Technology

1983-12-05

MD- R136 722 THIN FILM TECHNOLOGY OF HIGH-CRITICAL-TEMPERATURE 1/1 SUPERCONDUCTING ELECTRO..(U) WESTINGHOUSE RESEARCH AND DEVELOPMENT CENTER...critical temperature has been demonstrated. Work will continue in a closed system to eliminate the base superconductor degradation, reduce leakage...a 5% decline in Tc has been demonstrated. Work will continue in a closed system to eliminate the base superconductor degradation, reduce leakage and

Satellite Power Systems /SPS/ - Overview of system studies and critical technology

NASA Technical Reports Server (NTRS)

Manson, S. V.

1980-01-01

Systems studies and critical technology issues for the development and evaluation of Satellite Power Systems (SPS) for the photovoltaic generation of electrical energy and its transmission to earth are reviewed. Initial concept studies completed in 1976 and system definition studies initiated in the same year have indicated the technical feasibility of SPS and identified challenging issues to be addressed as part of the SPS Concept Development and Evaluation Program. Systems considered in the study include photovoltaic and solar thermal power conversion configurations employing klystron or solid state microwave generators or lasers for power transmission, and power transmission options, system constructability and in-orbit and ground operations. Technology investigations are being performed in the areas of microwave power transmission, structure/controls interactions and the behavior of key materials in the space/SPS environment. Favorable results have been obtained in the areas of microwave phase distribution and phase control, dc-RF conversion, antenna radiating element, and no insurmountable problems have been discovered in any of the investigations to date.

Toward a Critical Instructional Technology: Instrumental Rationality, Objectification, and Psychologism

ERIC Educational Resources Information Center

Gur, Bekir S.

2007-01-01

Using a multiple-paper format, this dissertation includes three papers. By providing critiques of instrumental rationality, objectification, and psychologism in instructional technology," this study aims to provide a tentative formulation of a "critical instructional technology that is sensitive to power and ethics. The first article starts by…

Applying the Critical Theory of Library Technology to Distance Library Services

ERIC Educational Resources Information Center

Brumfield, Elizabeth Jean

2010-01-01

The re-envisioning of libraries as information leaders in higher education requires an examination of the decisions made in the acquisition and adoption of library technology. The Critical Theory of Library Technology offers a framework for viewing technology decisions through a social, economic and political perspective. This paper uses the…

An information communication technology based approach for the acquisition of critical thinking skills.

PubMed

Pucer, Patrik; Trobec, Irena; Žvanut, Boštjan

2014-06-01

Both academics and practitioners agree that critical thinking skills are necessary to provide safe and comprehensive nursing care. In order to promote the development of critical thinking, nurse educators need to keep the teaching/learning process captivating and interesting using active learning environments. These can be implemented by using modern information and communication technologies that are simple, fun, and time and cost effective. The goal of our study was to design and test an approach, which allows individual and fast acquisition of critical thinking skills with the use of information and communication technology. A combination of qualitative and quantitative research design was implemented. The study consisted of a quasi-experiment (phases 1-3): (1) pre-test discussion board, (2) use of e-contents based on the presented approach, and (3) post-test discussion board. The participants' opinion about the presented approach was identified in phase 4. The study was performed in May 2012 during the course "Ethics and Philosophy in Nursing" at the Faculty of Health Sciences, University of Primorska, Slovenia. Forty first-year undergraduate nursing students. Qualitative analysis of the discussion boards (phases 1, 3) and an anonymous survey with open- and closed-ended questions (phase 4). Qualitative analysis of the discussion boards showed a significant (p<0.001) improvement in the percentage of posts (12.2%) for which the opinions and conclusions of the participants were justified with valid arguments. The survey results indicated that participants perceived the e-contents based on the presented approach as useful, and that they improved their critical thinking skills. Repeated confirmation of the validity of the presented approach through methodological triangulation represents a strong indication that the presented approach is a valuable tool to develop nursing students' critical thinking skills. Copyright © 2014 Elsevier Ltd. All rights reserved.

Inappropriate trust in technology: implications for critical care nurses.

PubMed

Browne, Mike; Cook, Penny

2011-01-01

To explore evidence from the literature that critical care nurses may have inappropriate levels of trust in the technological equipment they use and the implications of this for patient safety. Nurses in intensive care units are required to observe the operation of an array of complex equipment. Failure of this equipment can have potentially fatal consequences for the patient. Research from other settings, such as the work of airline pilots, suggests that experienced operators of highly reliable automation may display inappropriately high levels of trust in the automation and this can lead to inadequate monitoring of the equipment by the operator. Inadequate monitoring means that the operator may fail to notice that the equipment is not functioning correctly which may have serious consequences. An initial search was made of a number of databases including Academic Search Premier, CINAHL, Pubmed and ScienceDirect. Extensive use was also made of citations found in articles uncovered by this initial search. Evidence suggests that there is potential for critical care nurses to display complacent attitudes. In addition, there are a number of reasons why the consequences of this complacency are not as visible as in other settings. If nurses are not aware of the potential and consequences of inappropriate trust, there is a real possibility that patients may suffer harm because of it. There is an urgent need for more research to identify direct evidence of complacency and its consequences. There is also a need for these issues to be highlighted in the training of intensive care nurses and there are implications for intensive care unit practice protocols and equipment manufacturers. © 2011 The Authors. Nursing in Critical Care © 2011 British Association of Critical Care Nurses.

Stages of Adoption Concern and Technology Acceptance in a Critical Care Nursing Unit.

PubMed

Berg, Gina M; LoCurto, Jamie; Lippoldt, Diana

2017-09-01

The aim of this study is to examine the stages of concern (self, task, and impact) and usability (trust, perceived usefulness, and ease of use) shifts experienced by nurses adopting new technology. Patient care processes in critical care units can be disrupted with the incorporation of information technology. New users of technology typically transition through stages of concern and experience shifts in acceptance during assimilation. Critical care nurses (N = 41) were surveyed twice: (1) pre, immediately after training, and (2) post, 3 months after implementation of technology. From presurvey to postsurvey, self-concerns decreased 14%, whereas impact concerns increased 22%. Furthermore, there was a 30% increase in trust and a 17% increase in perceived usefulness, even with a 27% decrease in ease of use. Adoption of new technology requires critical care nurses to adapt current practices, which may improve trust and perceived usefulness yet decrease perceptions of ease of use.

The Department of Defense critical technologies plan for the Committees on Armed Services United States Congress

NASA Astrophysics Data System (ADS)

Young, Leo

1990-03-01

The second Annual Defense Critical Technologies Plan responds to the requirement that the Secretary of Defense submit to the Committees on Armed Services of the Senate and House of Representatives an annual plan for developing the technologies considered by the Secretary of Defense and the Secretary of Energy to be the technologies most critical to ensuring the long term qualitative superiority of the United States weapon systems. Twenty critical technologies are selected. The selection process is described, criteria for selection are set forth, and industrial and international assessments are summarized. The major portion of this report is contained in 20 sections in Appendix A, one section for each critical technology. Each section addresses the questions posed by Congress on funding, plans and milestones, industrial base and manufacturing issues, and the competitiveness of U.S. industry; it also provides an assessment of the positions of the Soviet Union, NATO, Japan and other industrialized countries in niche technologies within each critical technology.

Enhancing HumanAgent Teaming with Individualized, Adaptive Technologies: A Discussion of Critical Scientific Questions

DTIC Science & Technology

2018-05-04

ARL-TR-8359 ● MAY 2018 US Army Research Laboratory Enhancing Human–Agent Teaming with Individualized, Adaptive Technologies : A...with Individualized, Adaptive Technologies : A Discussion of Critical Scientific Questions by Arwen H DeCostanza, Amar R Marathe, Addison Bohannon...Enhancing Human–Agent Teaming with Individualized, Adaptive Technologies : A Discussion of Critical Scientific Questions 5a. CONTRACT NUMBER 5b

Technology Implementation in Education--Identifying Barriers to Fidelity

ERIC Educational Resources Information Center

Monroe, Arla K.; Dennis, William J.; Johnson, Daniel L.

2012-01-01

This report describes a problem-based learning project focused on determining the barriers to the implementation of technological innovations. that properly executed technology implementation is an instructional variable related to student achievement; yet, school district leaders are faced with the problem of recognizing and identifying the…

A Market Model for Evaluating Technologies That Impact Critical-Material Intensity

NASA Astrophysics Data System (ADS)

Iyer, Ananth V.; Vedantam, Aditya

2016-07-01

A recent Critical Materials Strategy report highlighted the supply chain risk associated with neodymium and dysprosium, which are used in the manufacturing of neodymium-iron-boron permanent magnets (PM). In response, the Critical Materials Institute is developing innovative strategies to increase and diversify primary production, develop substitutes, reduce material intensity and recycle critical materials. Our goal in this paper is to propose an economic model to quantify the impact of one of these strategies, material intensity reduction. Technologies that reduce material intensity impact the economics of magnet manufacturing in multiple ways because of: (1) the lower quantity of critical material required per unit PM, (2) more efficient use of limited supply, and (3) the potential impact on manufacturing cost. However, the net benefit of these technologies to a magnet manufacturer is an outcome of an internal production decision subject to market demand characteristics, availability and resource constraints. Our contribution in this paper shows how a manufacturer's production economics moves from a region of being supply-constrained, to a region enabling the market optimal production quantity, to a region being constrained by resources other than critical materials, as the critical material intensity changes. Key insights for engineers and material scientists are: (1) material intensity reduction can have a significant market impact, (2) benefits to manufacturers are non-linear in the material intensity reduction, (3) there exists a threshold value for material intensity reduction that can be calculated for any target PM application, and (4) there is value for new intellectual property (IP) when existing manufacturing technology is IP-protected.

Program for Critical Technologies in Breast Oncology

DTIC Science & Technology

1999-07-01

the tissues, and in a ethical manner that respects the patients’ rights . The Program for Critical Technologies in Breast Oncology helps address all of...diagnosis, database 15. NUMBER OF PAGES 148 16. PRICE CODE 17. SECURITY CLASSIFICATION OF REPORT Unclassified 18. SECURITY CLASSIFICATION OF THIS...closer to clinical utility. Page 17 References Adida C. Crotty PL. McGrath J. Berrebi D. Diebold J. Altieri DC. Developmentally regulated

Critical Fusion--Technology and Equity in Secondary Education

ERIC Educational Resources Information Center

Magolda, Peter

2006-01-01

This manuscript reports on the first year of a formative, external program evaluation of the Critical Fusion Initiative (CFI), which involved a higher education institution, a public high school, a corporation, and two nonprofit organizations. The initiative fused technology and education to address the issue of equity by assisting 16 high school…

Connecting Critical Theory of Technology to Educational Studies

ERIC Educational Resources Information Center

Kruger-Ross, Matthew James

2013-01-01

In this article, I explore how transformative learning theory, an approach to educating drawn from adult education, can be used to provide access to the critical theory of technology for educators. Rather than focusing primarily on K-12 teachers and educational systems or higher education and other postsecondary instruction, I connect learning as…

A quantitative metric to identify critical elements within seafood supply networks.

PubMed

Plagányi, Éva E; van Putten, Ingrid; Thébaud, Olivier; Hobday, Alistair J; Innes, James; Lim-Camacho, Lilly; Norman-López, Ana; Bustamante, Rodrigo H; Farmery, Anna; Fleming, Aysha; Frusher, Stewart; Green, Bridget; Hoshino, Eriko; Jennings, Sarah; Pecl, Gretta; Pascoe, Sean; Schrobback, Peggy; Thomas, Linda

2014-01-01

A theoretical basis is required for comparing key features and critical elements in wild fisheries and aquaculture supply chains under a changing climate. Here we develop a new quantitative metric that is analogous to indices used to analyse food-webs and identify key species. The Supply Chain Index (SCI) identifies critical elements as those elements with large throughput rates, as well as greater connectivity. The sum of the scores for a supply chain provides a single metric that roughly captures both the resilience and connectedness of a supply chain. Standardised scores can facilitate cross-comparisons both under current conditions as well as under a changing climate. Identification of key elements along the supply chain may assist in informing adaptation strategies to reduce anticipated future risks posed by climate change. The SCI also provides information on the relative stability of different supply chains based on whether there is a fairly even spread in the individual scores of the top few key elements, compared with a more critical dependence on a few key individual supply chain elements. We use as a case study the Australian southern rock lobster Jasus edwardsii fishery, which is challenged by a number of climate change drivers such as impacts on recruitment and growth due to changes in large-scale and local oceanographic features. The SCI identifies airports, processors and Chinese consumers as the key elements in the lobster supply chain that merit attention to enhance stability and potentially enable growth. We also apply the index to an additional four real-world Australian commercial fishery and two aquaculture industry supply chains to highlight the utility of a systematic method for describing supply chains. Overall, our simple methodological approach to empirically-based supply chain research provides an objective method for comparing the resilience of supply chains and highlighting components that may be critical.

A Quantitative Metric to Identify Critical Elements within Seafood Supply Networks

PubMed Central

Plagányi, Éva E.; van Putten, Ingrid; Thébaud, Olivier; Hobday, Alistair J.; Innes, James; Lim-Camacho, Lilly; Norman-López, Ana; Bustamante, Rodrigo H.; Farmery, Anna; Fleming, Aysha; Frusher, Stewart; Green, Bridget; Hoshino, Eriko; Jennings, Sarah; Pecl, Gretta; Pascoe, Sean; Schrobback, Peggy; Thomas, Linda

2014-01-01

A theoretical basis is required for comparing key features and critical elements in wild fisheries and aquaculture supply chains under a changing climate. Here we develop a new quantitative metric that is analogous to indices used to analyse food-webs and identify key species. The Supply Chain Index (SCI) identifies critical elements as those elements with large throughput rates, as well as greater connectivity. The sum of the scores for a supply chain provides a single metric that roughly captures both the resilience and connectedness of a supply chain. Standardised scores can facilitate cross-comparisons both under current conditions as well as under a changing climate. Identification of key elements along the supply chain may assist in informing adaptation strategies to reduce anticipated future risks posed by climate change. The SCI also provides information on the relative stability of different supply chains based on whether there is a fairly even spread in the individual scores of the top few key elements, compared with a more critical dependence on a few key individual supply chain elements. We use as a case study the Australian southern rock lobster Jasus edwardsii fishery, which is challenged by a number of climate change drivers such as impacts on recruitment and growth due to changes in large-scale and local oceanographic features. The SCI identifies airports, processors and Chinese consumers as the key elements in the lobster supply chain that merit attention to enhance stability and potentially enable growth. We also apply the index to an additional four real-world Australian commercial fishery and two aquaculture industry supply chains to highlight the utility of a systematic method for describing supply chains. Overall, our simple methodological approach to empirically-based supply chain research provides an objective method for comparing the resilience of supply chains and highlighting components that may be critical. PMID:24633147

Technology for the Future: In-Space Technology Experiments Program, part 2

NASA Technical Reports Server (NTRS)

Breckenridge, Roger A. (Compiler); Clark, Lenwood G. (Compiler); Willshire, Kelli F. (Compiler); Beck, Sherwin M. (Compiler); Collier, Lisa D. (Compiler)

1991-01-01

The purpose of the Office of Aeronautics and Space Technology (OAST) In-Space Technology Experiments Program In-STEP 1988 Workshop was to identify and prioritize technologies that are critical for future national space programs and require validation in the space environment, and review current NASA (In-Reach) and industry/ university (Out-Reach) experiments. A prioritized list of the critical technology needs was developed for the following eight disciplines: structures; environmental effects; power systems and thermal management; fluid management and propulsion systems; automation and robotics; sensors and information systems; in-space systems; and humans in space. This is part two of two parts and contains the critical technology presentations for the eight theme elements and a summary listing of critical space technology needs for each theme.

Using cognitive task analysis to identify critical decisions in the laparoscopic environment.

PubMed

Craig, Curtis; Klein, Martina I; Griswold, John; Gaitonde, Krishnanath; McGill, Thomas; Halldorsson, Ari

2012-12-01

The aim of this study was to identify the critical decisions surgeons need to make regarding laparoscopic surgery, the information these decisions are based on, the strategies employed by surgeons to reach their objectives, and the difficulties experienced by novices. Laparoscopic training focuses on the development of technical skills. However, successful surgical outcomes are also dependent on appropriate decisions made during surgery, which are influenced by critical cues and the use of appropriate strategies. Novices might not be as adept at cue detection and strategy use. Participants were eight attending surgeons. The authors employed task-analytic techniques to identify critical decisions inherent in laparoscopy and the cues, strategies, and novice traps associated with these decisions. The authors used decision requirements tables to organize the data into the key decisions made during the preoperative, operative, and postoperative phases as well as the cues, strategies, and novice traps associated with these decisions. Key decisions identified for the preoperative phase included but were not limited to the decision of performing a laparoscopic versus open surgery, necessity to review the literature, practicing the procedure, and trocar placement. Some key decisions identified for the operative phase included converting to open surgery, performing angiograms, cutting tissue or organs, and reevaluation of the approach. Only one key decision was identified for the postoperative phrase: whether the surgeon's technique needs to be evaluated and revised. The laparoscopic environment requires complex decision making, and novices are prone to errors in their decisions. The information elicited in this study is applicable to laparoscopic training.

Integration of Mobile Health Technology in the Treatment of Chronic Pain: A Critical Review.

PubMed

Sundararaman, Lalitha V; Edwards, Robert R; Ross, Edgar L; Jamison, Robert N

This article provides a critical overview and best-evidence synthesis of the use of mobile health (mHealth) technology among persons with chronic pain and their health care providers and examines the future benefits and barriers of implementing mHealth technology in clinical care. We critically review articles about electronic pain diaries, pain assessment programs, text messaging, and smartphone pain apps for management of persons with pain. Also presented are findings on the utility of activity trackers and use of telehealth to deliver cognitive behavioral therapy. Finally, barriers, study gaps, and future challenges of incorporating mobile technology for chronic pain are discussed. Although the future of mHealth technology and telemedicine in clinical practice is promising, this critical review highlights the need for rigorous studies to establish an association of the use of mHealth technology with improved quality of life, functional autonomy, and decreased hospital use.

VLSI Technology: Impact and Promise. Identifying Emerging Issues and Trends in Technology for Special Education.

ERIC Educational Resources Information Center

Bayoumi, Magdy

As part of a 3-year study to identify emerging issues and trends in technology for special education, this paper addresses the implications of very large scale integrated (VLSI) technology. The first section reviews the development of educational technology, particularly microelectronics technology, from the 1950s to the present. The implications…

Critical materialism: science, technology, and environmental sustainability.

PubMed

York, Richard; Clark, Brett

2010-01-01

There are widely divergent views on how science and technology are connected to environmental problems. A view commonly held among natural scientists and policy makers is that environmental problems are primarily technical problems that can be solved via the development and implementation of technological innovations. This technologically optimistic view tends to ignore power relationships in society and the political-economic order that drives environmental degradation. An opposed view, common among postmodernist and poststructuralist scholars, is that the emergence of the scientific worldview is one of the fundamental causes of human oppression. This postmodernist view rejects scientific epistemology and often is associated with an anti-realist stance, which ultimately serves to deny the reality of environmental problems, thus (unintentionally) abetting right-wing efforts to scuttle environmental protection. We argue that both the technologically optimistic and the postmodernist views are misguided, and both undermine our ability to address environmental crises. We advocate the adoption of a critical materialist stance, which recognizes the importance of natural science for helping us to understand the world while also recognizing the social embeddedness of the scientific establishment and the need to challenge the manipulation of science by the elite.

Ventilator Technologies Sustain Critically Injured Patients

NASA Technical Reports Server (NTRS)

2012-01-01

Consider this scenario: A soldier has been critically wounded in a sudden firefight in a remote region of Afghanistan. The soldier s comrades attend to him and radio for help, but the soldier needs immediate medical expertise and treatment that is currently miles away. The connection between medical support for soldiers on the battlefield and astronauts in space may not be immediately obvious. But when it comes to providing adequate critical care, NASA and the military have very similar operational challenges, says Shannon Melton of NASA contractor Wyle Integrated Science and Engineering. Melton works within Johnson Space Center s Space Medicine Division, which supports astronaut crew health before, during, and after flight. In space, we have a limited number of care providers, and those providers are not always clinicians with extensive medical training. We have limited room to provide care, limited consumables, and our environment is not like that of a hospital, she says. The Space Medicine Division s Advanced Projects Group works on combining the expertise of both clinicians and engineers to develop new capabilities that address the challenges of medical support in space, including providing care to distant patients. This field, called telemedicine, blends advanced communications practices and technologies with innovative medical devices and techniques to allow caregivers with limited or no medical experience to support a patient s needs. NASA, just by its nature, has been doing remote medicine since the beginning of the Space Program, says Melton, an engineer in the Advanced Projects Group. Since part of NASA s mandate is to transfer the results of its technological innovation for the benefit of the public, the Agency has worked with doctors and private industry to find ways to apply the benefits of space medicine on Earth. In one such case, a NASA partnership has resulted in new technologies that may improve the quality of emergency medicine for wounded

The Relevance of Feenberg's Critical Theory of Technology to Critical Visual Literacy: The Case of Scientific and Technical Illustrations

ERIC Educational Resources Information Center

Northcut, Kathryn M.

2007-01-01

Andrew Feenberg's critical theory of technology is an underutilized, relatively unknown resource in technical communication which could be exploited not only for its potential clarification of large social issues that involve our discipline, but also specifically toward the development of a critical theory of illustrations. Applications of…

Gas-turbine critical research and advanced technology support project

NASA Technical Reports Server (NTRS)

Clark, J. S.; Lowell, C. E.; Niedzwiecki, R. W.; Nainiger, J. J.

1979-01-01

The technical progress made during the first 15 months of a planned 40-month project to provide a critical-technology data base for utility gas-turbine systems capable of burning coal-derived fuels is summarized. Tasks were included in the following areas: (1) combustion, to study the combustion of coal-derived fuels and conversion of fuel-bound nitrogen to NOx; (2) materials, to understand and prevent hot corrosion; and (3) system studies, to integrate and guide the other technologies. Significant progress was made.

Guaifenesin stone matrix proteomics: a protocol for identifying proteins critical to stone formation.

PubMed

Kolbach-Mandel, A M; Mandel, N S; Cohen, S R; Kleinman, J G; Ahmed, F; Mandel, I C; Wesson, J A

2017-04-01

Drug-related kidney stones are a diagnostic problem, since they contain a large matrix (protein) fraction and are frequently incorrectly identified as matrix stones. A urine proteomics study patient produced a guaifenesin stone during her participation, allowing us to both correctly diagnose her disease and identify proteins critical to this drug stone-forming process. The patient provided three random midday urine samples for proteomics studies; one of which contained stone-like sediment with two distinct fractions. These solids were characterized with optical microscopy and Fourier transform infrared spectroscopy. Immunoblotting and quantitative mass spectrometry were used to quantitatively identify the proteins in urine and stone matrix. Infrared spectroscopy showed that the sediment was 60 % protein and 40 % guaifenesin and its metabolite guaiacol. Of the 156 distinct proteins identified in the proteomic studies, 49 were identified in the two stone-components with approximately 50 % of those proteins also found in this patient's urine. Many proteins observed in this drug-related stone have also been reported in proteomic matrix studies of uric acid and calcium containing stones. More importantly, nine proteins were highly enriched and highly abundant in the stone matrix and 8 were reciprocally depleted in urine, suggesting a critical role for these proteins in guaifenesin stone formation. Accurate stone analysis is critical to proper diagnosis and treatment of kidney stones. Many matrix proteins were common to all stone types, but likely not related to disease mechanism. This protocol defined a small set of proteins that were likely critical to guaifenesin stone formation based on their high enrichment and high abundance in stone matrix, and it should be applied to all stone types.

Coal gasification systems engineering and analysis. Appendix F: Critical technology items/issues

NASA Technical Reports Server (NTRS)

1980-01-01

Critical technology items and issues are defined in which there is a need for developmental research in order to assure technical and economic success for the state of the art of coal gasification in the United States. Technology development needs for the main processing units and the supporting units are discussed. While development needs are shown for a large number of systems, the most critical areas are associated with the gasifier itself and those systems which either feed the gasifier or directly receive products form the gasifier.

77 FR 57072 - Proposed Information Collection; Comment Request; National Security and Critical Technology...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-17

... Request; National Security and Critical Technology Assessments of the U.S. Industrial Base AGENCY: Bureau... Federal agencies, conducts assessments of U.S. industrial base sectors deemed critical to U.S. national... needs of these critical market segments in order to maintain a strong U.S. industrial base. II. Method...

Identifying Facets of Technology Satisfaction: Measure Development and Application

ERIC Educational Resources Information Center

Njoroge, Joyce; Norman, Andrew; Reed, Diana; Suh, Inchul

2012-01-01

As institutions of higher learning, universities must devote significant resources in developing intellectual capital in the use of educational technology to sustain their viability. To better understand satisfaction in technology used in classrooms, a psychometric instrument was developed to identify and measure the specific factors of…

An analysis of narratives to identify critical thinking contexts in psychiatric clinical practice.

PubMed

Mun, Mi Suk

2010-02-01

The development of students' critical thinking abilities is one of the greatest challenges facing contemporary nursing educators. Nursing educators should know about what kind of contents or situations need critical thinking. The research was undertaken to identify the critical thinking contexts that nursing students confront in psychiatric clinical practices. Students were asked to document their everyday experience. The narratives were analysed and interpreted from the philosophical notion of hermeneutics. Four themes emerged as critical thinking contexts: anxiety, conflict, hyper-awareness, dilemmas. Writing narratives appear to provide opportunities for reflection in addition to facilitating critical thinking and communicative skills in students. Also, for the instructor, students' clinical narratives could provide insight to understand how students are thinking and to share student's personal difficulties.

Identifying critical transitions and their leading biomolecular networks in complex diseases.

PubMed

Liu, Rui; Li, Meiyi; Liu, Zhi-Ping; Wu, Jiarui; Chen, Luonan; Aihara, Kazuyuki

2012-01-01

Identifying a critical transition and its leading biomolecular network during the initiation and progression of a complex disease is a challenging task, but holds the key to early diagnosis and further elucidation of the essential mechanisms of disease deterioration at the network level. In this study, we developed a novel computational method for identifying early-warning signals of the critical transition and its leading network during a disease progression, based on high-throughput data using a small number of samples. The leading network makes the first move from the normal state toward the disease state during a transition, and thus is causally related with disease-driving genes or networks. Specifically, we first define a state-transition-based local network entropy (SNE), and prove that SNE can serve as a general early-warning indicator of any imminent transitions, regardless of specific differences among systems. The effectiveness of this method was validated by functional analysis and experimental data.

Strategies for Defining and Understanding Critical Technology Integration Terms

ERIC Educational Resources Information Center

Fagehi, Ahmed Yahya

2013-01-01

Educational technology scholars believe that teachers should understand how to effectively integrate technology in their teaching. This study identified key terms related to integrating technology in education and investigated the effectiveness of three online instructional strategies (Text-only, Text plus Video, and Text plus Video plus Question)…

A Strategy to Identify Critical Appraisal Criteria for Primary Mixed-Method Studies

PubMed Central

Sale, Joanna E. M.; Brazil, Kevin

2015-01-01

The practice of mixed-methods research has increased considerably over the last 10 years. While these studies have been criticized for violating quantitative and qualitative paradigmatic assumptions, the methodological quality of mixed-method studies has not been addressed. The purpose of this paper is to identify criteria to critically appraise the quality of mixed-method studies in the health literature. Criteria for critically appraising quantitative and qualitative studies were generated from a review of the literature. These criteria were organized according to a cross-paradigm framework. We recommend that these criteria be applied to a sample of mixed-method studies which are judged to be exemplary. With the consultation of critical appraisal experts and experienced qualitative, quantitative, and mixed-method researchers, further efforts are required to revise and prioritize the criteria according to importance. PMID:26526412

A Synthesis and Survey of Critical Success Factors for Computer Technology Projects

ERIC Educational Resources Information Center

Baker, Ross A.

2012-01-01

The author investigated the existence of critical success factors for computer technology projects. Current research literature and a survey of experienced project managers indicate that there are 23 critical success factors (CSFs) that correlate with project success. The survey gathered an assessment of project success and the degree to which…

A critical review of the use of technology to provide psychosocial support for children and young people with long-term conditions.

PubMed

Aldiss, Susie; Baggott, Christina; Gibson, Faith; Mobbs, Sarah; Taylor, Rachel M

2015-01-01

Advances in technology have offered health professionals alternative mediums of providing support to patients with long-term conditions. This critical review evaluated and assessed the benefit of electronic media technologies in supporting children and young people with long-term conditions. Of 664 references identified, 40 met the inclusion criteria. Supportive technology tended to increase disease-related knowledge and improve aspects of psychosocial function. Supportive technology did not improve quality of life, reduce health service use or decrease school absences. The poor methodological quality of current evidence and lack of involvement of users in product development contribute to the uncertainty that supportive technology is beneficial. Copyright © 2015 Elsevier Inc. All rights reserved.

Brazilian health technology assessment bulletin: editorial process, dissemination strategies, critical appraisal, and initial impact.

PubMed

Silva, Marcus Tolentino; de Almeida, Rosimary Terezinha; Gava, Cintia Maria; Galvão, Taís Freire; da Silva, Edina Mariko Koga; Santos, Vania Cristina Canuto; Ronchini, Misani Akiko Kanamota; de Mesquita, Aline Monte; Elias, Flávia Tavares Silva; d'Oliveira, Alexandre Lemgruber Portugal; Atallah, Alvaro Nagib

2012-01-01

This study reports on the Brazilian experience of developing a specialized bulletin, the Brazilian Health Technology Assessment Bulletin (BRATS), on health technology assessments (HTA). The editorial process, format, and dissemination strategy of the publication are presented. A critical appraisal of the available issues was made using the checklist for HTA reports of the International Network of Agencies for Health Technology Assessment. The initial impact was estimated based on a retrospective observational measurement of the types of publications that cite the bulletin as a source of information. The publications citing BRATS were identified using Google Scholar. Since June 2008, fourteen issues of the bulletin have been produced. BRATS has not presented any significant limitation that would compromise generalizations of its results within the Brazilian context. The initial impact of the bulletin, however, has been small, which may be due to its exclusively electronic dissemination format and technical language. We found nine publications citing BRATS in Google Scholar. It is hoped that the bulletin will promote the continuity of HTA actions among health-sector managers and professionals in Brazil.

Critical Problems Facing Technology Education: Perceptions of Indiana Teachers

ERIC Educational Resources Information Center

Lazaros, Edward J.; Rogers, George E.

2006-01-01

In 1993 Wicklein conducted a study to determine the present and the future critical issues and problems facing the technology education (TE) profession. The Wicklein study questioned 25 panelists from 15 states and the District of Columbia to ascertain the issues and problems facing TE. However, in the Wicklein study, only seven of the panelists…

Technology to enhance physical rehabilitation of critically ill patients.

PubMed

Needham, Dale M; Truong, Alex D; Fan, Eddy

2009-10-01

Neuromuscular complications after critical illness are common and can be severe and persistent. To ameliorate complications, there is growing interest in starting physical medicine and rehabilitation therapy immediately after physiologic stabilization. The introduction of physical medicine and rehabilitation-related technology into the intensive care unit may help facilitate delivery of this therapy. Neuromuscular electrical stimulation therapy creates passive contraction of muscles through low-voltage electrical impulses delivered through skin electrodes placed over target muscles. Although neuromuscular electrical stimulation has not been studied in patients with acute critical illness, published guidelines based on available evidence suggest that neuromuscular electrical stimulation may be considered in intensive care unit patients who are at high risk of developing muscle weakness. Bedside cycle ergometry can provide range of motion and muscle strength training for intensive care unit patients who are either sedated or awake, and may help preserve muscle architecture and improve strength and function. Finally, custom-designed technological aids to assist with ambulating mechanically ventilated patients may reduce the human resource requirements and improve the safety and effectiveness of early mobilization in the intensive care unit. Physical medicine and rehabilitation-related technologies may play an important role in preventing and treating intensive care unit-acquired neuromuscular complications. Future studies are needed to evaluate their efficacy in intensive care unit patients.

Awareness of technology-induced errors and processes for identifying and preventing such errors.

PubMed

Bellwood, Paule; Borycki, Elizabeth M; Kushniruk, Andre W

2015-01-01

There is a need to determine if organizations working with health information technology are aware of technology-induced errors and how they are addressing and preventing them. The purpose of this study was to: a) determine the degree of technology-induced error awareness in various Canadian healthcare organizations, and b) identify those processes and procedures that are currently in place to help address, manage, and prevent technology-induced errors. We identified a lack of technology-induced error awareness among participants. Participants identified there was a lack of well-defined procedures in place for reporting technology-induced errors, addressing them when they arise, and preventing them.

Technological Determinism in Educational Technology Research: Some Alternative Ways of Thinking about the Relationship between Learning and Technology

ERIC Educational Resources Information Center

Oliver, M.

2011-01-01

This paper argues that research on the educational uses of technology frequently overemphasizes the influence of technology. Research in the field is considered a form of critical perspective, and assumptions about technology are questioned. Technological determinism is introduced, and different positions on this concept are identified. These are…

Pathway cross-talk network analysis identifies critical pathways in neonatal sepsis.

PubMed

Meng, Yu-Xiu; Liu, Quan-Hong; Chen, Deng-Hong; Meng, Ying

2017-06-01

Despite advances in neonatal care, sepsis remains a major cause of morbidity and mortality in neonates worldwide. Pathway cross-talk analysis might contribute to the inference of the driving forces in bacterial sepsis and facilitate a better understanding of underlying pathogenesis of neonatal sepsis. This study aimed to explore the critical pathways associated with the progression of neonatal sepsis by the pathway cross-talk analysis. By integrating neonatal transcriptome data with known pathway data and protein-protein interaction data, we systematically uncovered the disease pathway cross-talks and constructed a disease pathway cross-talk network for neonatal sepsis. Then, attract method was employed to explore the dysregulated pathways associated with neonatal sepsis. To determine the critical pathways in neonatal sepsis, rank product (RP) algorithm, centrality analysis and impact factor (IF) were introduced sequentially, which synthetically considered the differential expression of genes and pathways, pathways cross-talks and pathway parameters in the network. The dysregulated pathways with the highest IF values as well as RP<0.01 were defined as critical pathways in neonatal sepsis. By integrating three kinds of data, only 6919 common genes were included to perform the pathway cross-talk analysis. By statistic analysis, a total of 1249 significant pathway cross-talks were selected to construct the pathway cross-talk network. Moreover, 47 dys-regulated pathways were identified via attract method, 20 pathways were identified under RP<0.01, and the top 10 pathways with the highest IF were also screened from the pathway cross-talk network. Among them, we selected 8 common pathways, i.e. critical pathways. In this study, we systematically tracked 8 critical pathways involved in neonatal sepsis by integrating attract method and pathway cross-talk network. These pathways might be responsible for the host response in infection, and of great value for advancing

Identifying technology innovations for marginalized smallholders-A conceptual approach.

PubMed

Malek, Mohammad Abdul; Gatzweiler, Franz W; Von Braun, Joachim

2017-05-01

This paper adds a contribution in the existing literature in terms of theoretical and conceptual background for the identification of idle potentials of marginal rural areas and people by means of technological and institutional innovations. The approach follows ex-ante assessment for identifying suitable technology and institutional innovations for marginalized smallholders in marginal areas-divided into three main parts (mapping, surveying and evaluating) and several steps. Finally, it contributes to the inclusion of marginalized smallholders by an improved way of understanding the interactions between technology needs, farming systems, ecological resources and poverty characteristics in the different segments of the poor, and to link these insights with productivity enhancing technologies.

Simple Model for Identifying Critical Regions in Atrial Fibrillation

NASA Astrophysics Data System (ADS)

Christensen, Kim; Manani, Kishan A.; Peters, Nicholas S.

2015-01-01

Atrial fibrillation (AF) is the most common abnormal heart rhythm and the single biggest cause of stroke. Ablation, destroying regions of the atria, is applied largely empirically and can be curative but with a disappointing clinical success rate. We design a simple model of activation wave front propagation on an anisotropic structure mimicking the branching network of heart muscle cells. This integration of phenomenological dynamics and pertinent structure shows how AF emerges spontaneously when the transverse cell-to-cell coupling decreases, as occurs with age, beyond a threshold value. We identify critical regions responsible for the initiation and maintenance of AF, the ablation of which terminates AF. The simplicity of the model allows us to calculate analytically the risk of arrhythmia and express the threshold value of transversal cell-to-cell coupling as a function of the model parameters. This threshold value decreases with increasing refractory period by reducing the number of critical regions which can initiate and sustain microreentrant circuits. These biologically testable predictions might inform ablation therapies and arrhythmic risk assessment.

The Use of Technology in Identifying Hospital Malnutrition: Scoping Review.

PubMed

Trtovac, Dino; Lee, Joon

2018-01-19

Malnutrition is a condition most commonly arising from the inadequate consumption of nutrients necessary to maintain physiological health and is associated with the development of cardiovascular disease, osteoporosis, and sarcopenia. Malnutrition occurring in the hospital setting is caused by insufficient monitoring, identification, and assessment efforts. Furthermore, the ability of health care workers to identify and recognize malnourished patients is suboptimal. Therefore, interventions focusing on the identification and treatment of malnutrition are valuable, as they reduce the risks and rates of malnutrition within hospitals. Technology may be a particularly useful ally in identifying malnutrition due to scalability, timeliness, and effectiveness. In an effort to explore the issue, this scoping review synthesized the availability of technological tools to detect and identify hospital malnutrition. Our objective was to conduct a scoping review of the different forms of technology used in addressing malnutrition among adults admitted to hospital to (1) identify the extent of the published literature on this topic, (2) describe key findings, and (3) identify outcomes. We designed and implemented a search strategy in 3 databases (PubMed, Scopus, and CINAHL). We completed a descriptive numerical summary and analyzed study characteristics. One reviewer independently extracted data from the databases. We retrieved and reviewed a total of 21 articles. We categorized articles by the computerized tool or app type: malnutrition assessment (n=15), food intake monitoring (n=5), or both (n=1). Within those categories, we subcategorized the different technologies as either hardware (n=4), software (n=13), or both (n=4). An additional subcategory under software was cloud-based apps (n=1). Malnutrition in the acute hospital setting was largely an unrecognized problem, owing to insufficient monitoring, identification, and initial assessments of identifying both patients who are

Critical Technologies for the Development of Future Space Elevator Systems

NASA Technical Reports Server (NTRS)

Smitherman, David V., Jr.

2005-01-01

A space elevator is a tether structure extending through geosynchronous earth orbit (GEO) to the surface of the earth. Its center of mass is in GEO such that it orbits the earth in sync with the earth s rotation. In 2004 and 2005, the NASA Marshall Space Flight Center and the Institute for Scientific Research, Inc. worked under a cooperative agreement to research the feasibility of space elevator systems, and to advance the critical technologies required for the future development of space elevators for earth to orbit transportation. The discovery of carbon nanotubes in the early 1990's was the first indication that it might be possible to develop materials strong enough to make space elevator construction feasible. This report presents an overview of some of the latest NASA sponsored research on space elevator design, and the systems and materials that will be required to make space elevator construction possible. In conclusion, the most critical technology for earth-based space elevators is the successful development of ultra high strength carbon nanotube reinforced composites for ribbon construction in the 1OOGPa range. In addition, many intermediate technology goals and demonstration missions for the space elevator can provide significant advancements to other spaceflight and terrestrial applications.

NASA-LaRc Flight-Critical Digital Systems Technology Workshop

NASA Technical Reports Server (NTRS)

Meissner, C. W., Jr. (Editor); Dunham, J. R. (Editor); Crim, G. (Editor)

1989-01-01

The outcome is documented of a Flight-Critical Digital Systems Technology Workshop held at NASA-Langley December 13 to 15 1988. The purpose of the workshop was to elicit the aerospace industry's view of the issues which must be addressed for the practical realization of flight-critical digital systems. The workshop was divided into three parts: an overview session; three half-day meetings of seven working groups addressing aeronautical and space requirements, system design for validation, failure modes, system modeling, reliable software, and flight test; and a half-day summary of the research issues presented by the working group chairmen. Issues that generated the most consensus across the workshop were: (1) the lack of effective design and validation methods with support tools to enable engineering of highly-integrated, flight-critical digital systems, and (2) the lack of high quality laboratory and field data on system failures especially due to electromagnetic environment (EME).

Arc-to-Arc mini-sling 1999: a critical analysis of concept and technology.

PubMed

Palma, Paulo

2011-01-01

The aim of this study was to critically review the Arc-to-Arc mini-sling (Palma's technique) a less invasive mid-urethral sling using bovine pericardium as the sling material. The Arc-to-Arc mini-sling, using bovine pericardium, was the first published report of a mini-sling, in 1999. The technique was identical to the "tension-free tape" operation, midline incision and dissection of the urethra. The ATFP (white line) was identified by blunt dissection, and the mini-sling was sutured to the tendinous arc on both sides with 2 polypropylene 00 sutures. The initial results were encouraging, with 9/10 patients cured at the 6 weeks post-operative visit. However, infection and extrusion of the mini-sling resulted in sling extrusion and removal, with 5 patients remaining cured at 12 months. The Arc-to-Arc mini-sling was a good concept, but failed because of the poor technology available at that time. Further research using new materials and better technology has led to new and safer alternatives for the management of stress urinary incontinence.

Optimal Management of the Critically Ill: Anaesthesia, Monitoring, Data Capture, and Point-of-Care Technological Practices in Ovine Models of Critical Care

PubMed Central

Shekar, Kiran; Tung, John-Paul; Dunster, Kimble R.; Platts, David; Watts, Ryan P.; Gregory, Shaun D.; Simonova, Gabriela; McDonald, Charles; Hayes, Rylan; Bellpart, Judith; Timms, Daniel; Fung, Yoke L.; Toon, Michael; Maybauer, Marc O.; Fraser, John F.

2014-01-01

Animal models of critical illness are vital in biomedical research. They provide possibilities for the investigation of pathophysiological processes that may not otherwise be possible in humans. In order to be clinically applicable, the model should simulate the critical care situation realistically, including anaesthesia, monitoring, sampling, utilising appropriate personnel skill mix, and therapeutic interventions. There are limited data documenting the constitution of ideal technologically advanced large animal critical care practices and all the processes of the animal model. In this paper, we describe the procedure of animal preparation, anaesthesia induction and maintenance, physiologic monitoring, data capture, point-of-care technology, and animal aftercare that has been successfully used to study several novel ovine models of critical illness. The relevant investigations are on respiratory failure due to smoke inhalation, transfusion related acute lung injury, endotoxin-induced proteogenomic alterations, haemorrhagic shock, septic shock, brain death, cerebral microcirculation, and artificial heart studies. We have demonstrated the functionality of monitoring practices during anaesthesia required to provide a platform for undertaking systematic investigations in complex ovine models of critical illness. PMID:24783206

The role of health information technology on critical care services in Thailand.

PubMed

Wacharasint, Petch

2014-01-01

Health information technology (IT) has become an important part of current medical practice, especially in critical care services. One significant advance is the use of telemedicine which was initiated in Thailand nearly two decades ago. Telemedicine is also used in the intensive care unit or what has been termed the "Tele-ICU". It has evolved as an alternate paradigm linking the intensivist and critical care specialists to critically ill patients in remote areas. In this article, the author has reviewed the evidence of health IT on critical care services in Thailand, focusing on telemedicine, as well as the concept of the 'Tele-ICU' and its challenges. These factors may assist intensivists to reach more critically ill patients in remote areas.

Nursing care in a high-technological environment: Experiences of critical care nurses.

PubMed

Tunlind, Adam; Granström, John; Engström, Åsa

2015-04-01

Management of technical equipment, such as ventilators, infusion pumps, monitors and dialysis, makes health care in an intensive care setting more complex. Technology can be defined as items, machinery and equipment that are connected to knowledge and management to maximise efficiency. Technology is not only the equipment itself, but also the knowledge of how to use it and the ability to convert it into nursing care. The aim of this study is to describe critical care nurses' experience of performing nursing care in a high technology healthcare environment. Qualitative, personal interviews were conducted during 2012 with eight critical care nurses in the northern part of Sweden. Interview transcripts were analysed using qualitative content analysis. Three themes with six categories emerged. The technology was described as a security that could facilitate nursing care, but also one that could sometimes present obstacles. The importance of using the clinical gaze was highlighted. Nursing care in a high technological environment must be seen as multi-faceted when it comes to how it affects CCNs' experience. The advanced care conducted in an ICU could not function without high-tech equipment, nor could care operate without skilled interpersonal interaction and maintenance of basal nursing. That technology is seen as a major tool and simultaneously as a barrier to patient-centred care. Copyright © 2014 Elsevier Ltd. All rights reserved.

A Checklist for Identifying Funding Sources for Assistive Technology.

ERIC Educational Resources Information Center

Menlove, Martell

1996-01-01

This article offers a systematically organized series of questions to identify funding sources for assistive technology for students with disabilities. A decision tree links the questions with funding sources. (DB)

Critical Thinking Skills among Elementary School Students: Comparing Identified Gifted and General Education Student Performance

ERIC Educational Resources Information Center

Kettler, Todd

2014-01-01

Education reform efforts, including the current adoption of Common Core State Standards, have increased attention to teaching critical thinking skills to all students. This study investigated the critical thinking skills of fourth-grade students from a school district in Texas, including 45 identified gifted students and 163 general education…

Technology for the Future: In-Space Technology Experiments Program, part 1

NASA Technical Reports Server (NTRS)

Breckenridge, Roger A. (Compiler); Clark, Lenwood G. (Compiler); Willshire, Kelli F. (Compiler); Beck, Sherwin M. (Compiler); Collier, Lisa D. (Compiler)

1991-01-01

The purpose of the Office of Aeronautics and Space Technology (OAST) In-Space Technology Experiment Program (In-STEP) 1988 Workshop was to identify and prioritize technologies that are critical for future national space programs and require validation in the space environment, and review current NASA (In-Reach) and industry/university (Out-Reach) experiments. A prioritized list of the critical technology needs was developed for the following eight disciplines: structures; environmental effects; power systems and thermal management; fluid management and propulsion systems; automation and robotics; sensors and information systems; in-space systems; and humans in space. This is part one of two parts and is the executive summary and experiment description. The executive summary portion contains keynote addresses, strategic planning information, and the critical technology needs summaries for each theme. The experiment description portion contains brief overviews of the objectives, technology needs and backgrounds, descriptions, and development schedules for current industry, university, and NASA space flight technology experiments.

Critical Reflection to Identify Gaps between Espoused Theory and Theory-in-Use

ERIC Educational Resources Information Center

Savaya, Riki; Gardner, Fiona

2012-01-01

Critical reflection (CR) is a process by which one may identify the assumptions governing one's actions, question them, and develop alternative behaviors. This article presents two cases that demonstrate the use of CR to raise social workers' awareness of gaps between what Schon and Argryis term social workers' "espoused theories" and the…

Identifying the Critical Links in Road Transportation Networks: Centrality-based approach utilizing structural properties

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chinthavali, Supriya

Surface transportation road networks share structural properties similar to other complex networks (e.g., social networks, information networks, biological networks, and so on). This research investigates the structural properties of road networks for any possible correlation with the traffic characteristics such as link flows those determined independently. Additionally, we define a criticality index for the links of the road network that identifies the relative importance in the network. We tested our hypotheses with two sample road networks. Results show that, correlation exists between the link flows and centrality measures of a link of the road (dual graph approach is followed) andmore » the criticality index is found to be effective for one test network to identify the vulnerable nodes.« less

Recognizing nurse stakeholder dissonance as a critical determinant of patient safety in new healthcare information technologies.

PubMed

Samaras, Elizabeth A; Real, Sara D; Curtis, Amber M; Meunier, Tessa S

2012-01-01

Proper identification of all stakeholders and the comprehensive assessment of their evolving and often conflicting Needs, Wants, and Desires (NWDs) is a fundamental principle of human factors science and human-centered systems engineering; it is not yet a consistent element in development and deployment of new health information technologies (HIT). As the single largest group of healthcare professionals, nurses are critical stakeholders for these new technologies. Careful analysis can reveal nurse stakeholder dissonance (NSD) when integrating new technologies into the healthcare environment. Stakeholder dissonance is a term that describes the conflict between the NWDs of different stakeholders which, if left unresolved, can result in dissatisfaction, workarounds, errors, and threats to patient safety. Three case studies drawn from the authors' experience in a variety of acute-care settings where new HITs have been recently deployed are examined to illustrate the concept of NSD. Conflicting NWDs, other stakeholders, and possible root causes of the NSD are analyzed and mapped to threats to patient safety. Lessons learned, practical guidance for anticipating, identifying, and mitigating NSD, future research and implications for HFE and nursing practice are discussed.

An Exploratory Study on the Application of Conceptual Knowledge and Critical Thinking to Technological Issues

ERIC Educational Resources Information Center

Yu, Kuang-Chao; Lin, Kuen-Yi; Fan, Szu-Chun

2015-01-01

This study explored how senior high school students apply their conceptual knowledge, consisting of theoretical and system knowledge, to think critically when confronted with technological issues. We employed a curriculum on the history of communication technology to teach students about basic concepts in communication technology and to cultivate…

Consumer-identified barriers and strategies for optimizing technology use in the workplace.

PubMed

De Jonge, Desleigh M; Rodger, Sylvia A

2006-01-01

This article explores the experiences of 26 assistive technology (AT) users having a range of physical impairments as they optimized their use of technology in the workplace. A qualitative research design was employed using in-depth, open-ended interviews and observations of AT users in the workplace. Participants identified many factors that limited their use of technology such as discomfort and pain, limited knowledge of the technology's features, and the complexity of the technology. The amount of time required for training, limited work time available for mastery, cost of training and limitations of the training provided, resulted in an over-reliance on trial and error and informal support networks and a sense of isolation. AT users enhanced their use of technology by addressing the ergonomics of the workstation and customizing the technology to address individual needs and strategies. Other key strategies included tailored training and learning support as well as opportunities to practice using the technology and explore its features away from work demands. This research identified structures important for effective AT use in the workplace which need to be put in place to ensure that AT users are able to master and optimize their use of technology.

Getting on the Same Page: Identifying Goals for Technology Use in Early Childhood Education. Policy Brief

ERIC Educational Resources Information Center

Daugherty, Lindsay; Dossani, Rafiq; Johnson, Erin-Elizabeth; Wright, Cameron

2014-01-01

Technology use among young children is increasingly a fact of life, and establishing a clear set of goals that are broadly accepted by stakeholders is critical to planning for the successful integration of technology into early childhood education (ECE). However, debates about the role of technology in ECE settings are ongoing, with some…

Real-time data system: Incorporating new technology in mission critical environments

NASA Technical Reports Server (NTRS)

Muratore, John F.; Heindel, Troy A.

1990-01-01

If the Space Station Freedom is to remain viable over its 30-year life span, it must be able to incorporate new information systems technologies. These technologies are necessary to enhance mission effectiveness and to enable new NASA missions, such as supporting the Lunar-Mars Initiative. Hi-definition television (HDTV), neural nets, model-based reasoning, advanced languages, CPU designs, and computer networking standards are areas which have been forecasted to make major strides in the next 30 years. A major challenge to NASA is to bring these technologies online without compromising mission safety. In past programs, NASA managers have been understandably reluctant to rely on new technologies for mission critical activities until they are proven in noncritical areas. NASA must develop strategies to allow inflight confidence building and migration of technologies into the trusted tool base. NASA has successfully met this challenge and developed a winning strategy in the Space Shuttle Mission Control Center. This facility, which is clearly among NASA's most critical, is based on 1970's mainframe architecture. Changes to the mainframe are very expensive due to the extensive testing required to prove that changes do not have unanticipated impact on critical processes. Systematic improvement efforts in this facility have been delayed due to this 'risk to change.' In the real-time data system (RTDS) we have introduced a network of engineering computer workstations which run in parallel to the mainframe system. These workstations are located next to flight controller operating positions in mission control and, in some cases, the display units are mounted in the traditional mainframe consoles. This system incorporates several major improvements over the mainframe consoles including automated fault detection by real-time expert systems and color graphic animated schematics of subsystems driven by real-time telemetry. The workstations have the capability of recording

On the Edge of Research and Technological Application: A Critical Review of Electromethanogenesis

PubMed Central

Blasco-Gómez, Ramiro; Batlle-Vilanova, Pau; Villano, Marianna; Balaguer, Maria Dolors; Colprim, Jesús; Puig, Sebastià

2017-01-01

The conversion of electrical current into methane (electromethanogenesis) by microbes represents one of the most promising applications of bioelectrochemical systems (BES). Electromethanogenesis provides a novel approach to waste treatment, carbon dioxide fixation and renewable energy storage into a chemically stable compound, such as methane. This has become an important area of research since it was first described, attracting different research groups worldwide. Basics of the process such as microorganisms involved and main reactions are now much better understood, and recent advances in BES configuration and electrode materials in lab-scale enhance the interest in this technology. However, there are still some gaps that need to be filled to move towards its application. Side reactions or scaling-up issues are clearly among the main challenges that need to be overcome to its further development. This review summarizes the recent advances made in the field of electromethanogenesis to address the main future challenges and opportunities of this novel process. In addition, the present fundamental knowledge is critically reviewed and some insights are provided to identify potential niche applications and help researchers to overcome current technological boundaries. PMID:28425974

On the Edge of Research and Technological Application: A Critical Review of Electromethanogenesis.

PubMed

Blasco-Gómez, Ramiro; Batlle-Vilanova, Pau; Villano, Marianna; Balaguer, Maria Dolors; Colprim, Jesús; Puig, Sebastià

2017-04-20

The conversion of electrical current into methane (electromethanogenesis) by microbes represents one of the most promising applications of bioelectrochemical systems (BES). Electromethanogenesis provides a novel approach to waste treatment, carbon dioxide fixation and renewable energy storage into a chemically stable compound, such as methane. This has become an important area of research since it was first described, attracting different research groups worldwide. Basics of the process such as microorganisms involved and main reactions are now much better understood, and recent advances in BES configuration and electrode materials in lab-scale enhance the interest in this technology. However, there are still some gaps that need to be filled to move towards its application. Side reactions or scaling-up issues are clearly among the main challenges that need to be overcome to its further development. This review summarizes the recent advances made in the field of electromethanogenesis to address the main future challenges and opportunities of this novel process. In addition, the present fundamental knowledge is critically reviewed and some insights are provided to identify potential niche applications and help researchers to overcome current technological boundaries.

[Philosophical perspectives about the use of technology in critical care nursing].

PubMed

Schwonke, Camila Rose G Barcelos; Lunardi Filho, Wilson Danilo; Lunardi, Valéria Lerch; Santos, Silvana Sidney Costa; Barlem, Edison Luiz Devos

2011-01-01

The context of health assistance has been influenced by changes which are produced in the dimension of technology. They have triggered a lot of inquietude and questioning regarding benefits, risks, and relations constructed among workers and sick, and the use of machines as indispensable tools for care. This paper aims at reflecting on the use of technology in nursing care given to the critical sick in the intensive care unit. It is expected that this reflection can minimize doubts which permeate technological environments, such as the intensive care unit, and the conceptions of nursing care since it involves the use of machines and equipment which provide advanced life support in this field of health assistance.

Identifying and Addressing Stakeholder Interests in Design Science Research: An Analysis Using Critical Systems Heuristics

NASA Astrophysics Data System (ADS)

Venable, John R.

This paper utilises the Critical Systems Heuristics (CSH) framework developed by Werner Ulrich to critically consider the stakeholders and design goals that should be considered as relevant by researchers conducing Design Science Research (DSR). CSH provides a philosophically and theoretically grounded framework and means for critical consideration of the choices of stakeholders considered to be relevant to any system under design consideration. The paper recommends that legitimately undertaken DSR should include witnesses to represent the interests of the future consumers of the outcomes of DSR, i.e., the future clients, decision makers, professionals, and other non-included stakeholders in the future use of the solution technologies to be invented in DSR. The paper further discusses options for how witnesses might be included, who should be witnessed for and obstacles to implementing the recommendations.

Small Engine Component Technology (SECT) study

NASA Technical Reports Server (NTRS)

Singh, B.

1986-01-01

Small advanced (450 to 850 pounds thrust, 2002 to 3781 N) gas turbine engines were studied for a subsonic strategic cruise missile application, using projected year 2000 technology. An aircraft, mission characteristics, and baseline (state-of-the-art) engine were defined to evaluate technology benefits. Engine performance and configuration analyses were performed for two and three spool turbofan and propfan engine concepts. Mission and Life Cycle Cost (LCC) analyses were performed in which the candidate engines were compared to the baseline engines over a prescribed mission. The advanced technology engines reduced system LCC up to 41 percent relative to the baseline engine. Critical aerodynamic, materials, and mechanical systems turbine engine technologies were identified and program plans were defined for each identified critical technology.

Simulation-based assessment to identify critical gaps in safe anesthesia resident performance.

PubMed

Blum, Richard H; Boulet, John R; Cooper, Jeffrey B; Muret-Wagstaff, Sharon L

2014-01-01

Valid methods are needed to identify anesthesia resident performance gaps early in training. However, many assessment tools in medicine have not been properly validated. The authors designed and tested use of a behaviorally anchored scale, as part of a multiscenario simulation-based assessment system, to identify high- and low-performing residents with regard to domains of greatest concern to expert anesthesiology faculty. An expert faculty panel derived five key behavioral domains of interest by using a Delphi process (1) Synthesizes information to formulate a clear anesthetic plan; (2) Implements a plan based on changing conditions; (3) Demonstrates effective interpersonal and communication skills with patients and staff; (4) Identifies ways to improve performance; and (5) Recognizes own limits. Seven simulation scenarios spanning pre-to-postoperative encounters were used to assess performances of 22 first-year residents and 8 fellows from two institutions. Two of 10 trained faculty raters blinded to trainee program and training level scored each performance independently by using a behaviorally anchored rating scale. Residents, fellows, facilitators, and raters completed surveys. Evidence supporting the reliability and validity of the assessment scores was procured, including a high generalizability coefficient (ρ = 0.81) and expected performance differences between first-year resident and fellow participants. A majority of trainees, facilitators, and raters judged the assessment to be useful, realistic, and representative of critical skills required for safe practice. The study provides initial evidence to support the validity of a simulation-based performance assessment system for identifying critical gaps in safe anesthesia resident performance early in training.

IDENTIFYING PERFORMANCE ASSURANCE CHALLENGES FOR SMART MANUFACTURING.

PubMed

Helu, Moneer; Morris, Katherine; Jung, Kiwook; Lyons, Kevin; Leong, Swee

2015-10-01

Smart manufacturing has the potential to address many of the challenges faced by industry. However, the manufacturing community often needs assistance to leverage available technologies to improve their systems. To assure the performance of these technologies, this paper proposes a shared knowledge base that collects problem areas, solutions, and best practices for manufacturing technology. An Implementation Risk Assessment Framework (IRAF) is also described to identify the primary weaknesses of technologies in specific manufacturing contexts. Such approaches have the potential to stimulate new ideas and drive standardization activities critical to scale up and deploy smart manufacturing technologies successfully and quickly.

IDENTIFYING PERFORMANCE ASSURANCE CHALLENGES FOR SMART MANUFACTURING

PubMed Central

Helu, Moneer; Morris, Katherine; Jung, Kiwook; Lyons, Kevin; Leong, Swee

2015-01-01

Smart manufacturing has the potential to address many of the challenges faced by industry. However, the manufacturing community often needs assistance to leverage available technologies to improve their systems. To assure the performance of these technologies, this paper proposes a shared knowledge base that collects problem areas, solutions, and best practices for manufacturing technology. An Implementation Risk Assessment Framework (IRAF) is also described to identify the primary weaknesses of technologies in specific manufacturing contexts. Such approaches have the potential to stimulate new ideas and drive standardization activities critical to scale up and deploy smart manufacturing technologies successfully and quickly. PMID:26783512

Partnering To Build a Quality Workforce: Critical Issues in Environmental Technology Education at Two-Year Colleges. A Report of the National Forum on Critical Issues in Environmental Technology Education at Two-Year Colleges (Washington, D.C., March 2-4, 1995).

ERIC Educational Resources Information Center

Kabat, Ellen J.; Friedel, Janice Nahra; Senew, Mike

The National Forum on Critical Issues in Environmental Technology Education at Two-Year Colleges addressed critical issues relevant to environmental technology education in the United States. Forty-three participants from across the country who attended the 1995 Forum represented business and industry, two-year colleges, four-year colleges and…

Sensory Overload and Technology in Critical Care.

PubMed

Wung, Shu-Fen; Malone, Daniel C; Szalacha, Laura

2018-06-01

In this focus group study, we identified issues associated with sensory overload from medical technology alarms/alerts for intensive care unit nurses. Participants indicated that alarms from cardiopulmonary monitors, ventilators, and intravenous pumps contributed the most to sensory overload and, yet, these alarms were also deemed the most helpful. Alerts/alarms from electronic health records and medication dispensing systems were rated low in contributing to sensory overload, as well as being the least helpful. Specific device/technology barriers, related to device alerts/alarms, are detailed. Future user-centered and integrated improvements in alarm systems associated with medical devices in the intensive care unit are needed. Copyright © 2018 Elsevier Inc. All rights reserved.

Technology Needs to Support Future Mars Exploration

NASA Technical Reports Server (NTRS)

Nilsen, Erik N.; Baker, John; Lillard, Randolph P.

2013-01-01

The Mars Program Planning Group (MPPG) under the direction of Dr. Orlando Figueroa, was chartered to develop options for a program-level architecture for robotic exploration of Mars consistent with the objective to send humans to Mars in the 2030's. Scientific pathways were defined for future exploration, and multiple architectural options were developed that meet current science goals and support the future human exploration objectives. Integral to the process was the identification of critical technologies which enable the future scientific and human exploration goals. This paper describes the process for technology capabilities identification and examines the critical capability needs identified in the MPPG process. Several critical enabling technologies that have been identified to support the robotic exploration goals and with potential feedforward application to human exploration goals. Potential roadmaps for the development and validation of these technologies are discussed, including options for subscale technology demonstrations of future human exploration technologies on robotic missions.

A model for technology assessment as applied to closed loop infusion systems. Technology Assessment Task Force of the Society of Critical Care Medicine.

PubMed

Jastremski, M; Jastremski, C; Shepherd, M; Friedman, V; Porembka, D; Smith, R; Gonzales, E; Swedlow, D; Belzberg, H; Crass, R

1995-10-01

To test a model for the assessment of critical care technology on closed loop infusion control, a technology that is in its early stages of development and testing on human subjects. A computer-assisted search of the English language literature and reviews of the gathered data by experts in the field of closed loop infusion control systems. Studies relating to closed loop infusion control that addressed one or more of the questions contained in our technology assessment template were analyzed. Study design was not a factor in article selection. However, the lack of well-designed clinical outcome studies was an important factor in determining our conclusions. A focus person summarized the data from the selected studies that related to each of the assessment questions. The preliminary data summary developed by the focus person was further analyzed and refined by the task force. Experts in closed loop systems were then added to the group to review the summary provided by the task force. These experts' comments were considered by the task force and this final consensus report was developed. Closed loop system control is a technological concept that may be applicable to several aspects of critical care practice. This is a technology in the early stages of evolution and much more research and data are needed before its introduction into usual clinical practice. Furthermore, each specific application and each device for each application (e.g., nitroprusside infusion, ventilator adjustment), although based on the same technological concept, are sufficiently different in terms of hardware and computer algorithms to require independent validation studies. Closed loop infusion systems may have a role in critical care practice. However, for most applications, further development is required to move this technology from the innovation phase to the point where it can be evaluated so that its role in critical car practice can be defined. Each application of closed loop infusion

Identifying the Critical Time Period for Information Extraction when Recognizing Sequences of Play

ERIC Educational Resources Information Center

North, Jamie S.; Williams, A. Mark

2008-01-01

The authors attempted to determine the critical time period for information extraction when recognizing play sequences in soccer. Although efforts have been made to identify the perceptual information underpinning such decisions, no researchers have attempted to determine "when" this information may be extracted from the display. The authors…

Information and Communication Technologies and Development of Learners' Critical Thinking: Primary School Teachers' Attitudes

ERIC Educational Resources Information Center

Giavrimis, Panagiotis; Papanis, Efstratios; Papanis, Eirini-Myrsini

2011-01-01

The Information and Communication Technologies exercise a great impact on the ways people work, communicate and interact, and contribute considerably to the development of learners' skills. However, the use of Information and Communication Technologies cannot lead to the development of high-order skills and of critical thinking, if not combined…

Application of Advanced Fracture Mechanics Technology to Ensure Structural Reliability in Critical Titanium Structures,

DTIC Science & Technology

1982-11-22

RD-Ri42 354 APPLICATION OF ADVANCED FRACTURE MECHANICS TECHNOLOGY i/i TT ENSURE STRUCTURA..(U) 1WESTINGHOUSE RESEARCH FND DEVELOPMENT CENTER...I Iml .4. 47 Igo 12. 4 %B 1. __ ~. ~% ski Z L __ 12 APPLICATION OF ADVANCED FRACTURE MECHANICS -p TECHNOLOGY TO ENSURE STRUCTURAL RELIABILITY IN...Road W Pilttsburgh. Pennsylvania 15235 84 06 18 207 APPLICATION OF ADVANCED FRACTURE MECHANICS TECHNOLOGY TO ENSURE STRUCTURAL RELIABILITY IN CRITICAL

Technology supporting written productivity in children with learning disabilities: a critical review.

PubMed

Batorowicz, Beata; Missiuna, Cheryl A; Pollock, Nancy A

2012-10-01

Occupational therapists working with school-aged children are often in the position of recommending technology to enhance written productivity. The outcome of using technology on the writing of children with learning disabilities has not been reviewed critically, and this knowledge is necessary for evidence-based practice. To review evidence regarding the use of technology to support written productivity in children with learning disabilities. A systematic search of seven databases, plus a manual search, retrieved 864 papers published between 1985 and March 2012. Twenty-seven papers (28 studies) met inclusion criteria. The evidence is of a moderately low level and results are inconclusive; however, trends suggest a positive influence of some technology on children's performance and behaviour. Methodological limitations exist in most studies and the description of specific technology intervention is often combined with teaching instructions. The available research is encouraging, but high-quality investigations with newer technologies are needed.

Identifying critical issues in recreation planning and management: improving the management-research partnership

Treesearch

John H. Schomaker; David W. Lime

1988-01-01

The "nominal group" process is a proven technique to systematically arrive at a consensus about critical information needs in recreation planning and management. Using this process, 41 managers who attended a 1983 conference on river management identified 114 specific information needs grouped under 11 general questions. Clearly, some concerns of...

Relationship between Professional Values and Critical Thinking Disposition of Science-Technology and Mathematics Teachers

ERIC Educational Resources Information Center

Sahin, Senar Alkin; Tunca, Nihal; Altinkurt, Yahya; Yilmaz, Kürsad

2016-01-01

The purpose of this study is to determine the relationship between the professional values and critical thinking disposition of science-technology and mathematics teachers working in middle schools. The survey research method was employed in the study. The sample of the study is comprised of 193 teachers (90 science-technology and 103 mathematics…

Beyond health information technology: critical factors necessary for effective diabetes disease management.

PubMed

Ciemins, Elizabeth L; Coon, Patricia J; Fowles, Jinnet Briggs; Min, Sung-joon

2009-05-01

Electronic health records (EHRs) have been implemented throughout the United States with varying degrees of success. Past EHR implementation experiences can inform health systems planning to initiate new or expand existing EHR systems. Key "critical success factors," e.g., use of disease registries, workflow integration, and real-time clinical guideline support, have been identified but not fully tested in practice. A pre/postintervention cohort analysis was conducted on 495 adult patients selected randomly from a diabetes registry and followed for 6 years. Two intervention phases were evaluated: a "low-dose" period targeting primary care provider (PCP) and patient education followed by a "high-dose" EHR diabetes management implementation period, including a diabetes disease registry and office workflow changes, e.g., diabetes patient preidentification to facilitate real-time diabetes preventive care, disease management, and patient education. Across baseline, "low-dose," and "high-dose" postintervention periods, a significantly greater proportion of patients (a) achieved American Diabetes Association (ADA) guidelines for control of blood pressure (26.9 to 33.1 to 43.9%), glycosylated hemoglobin (48.5 to 57.5 to 66.8%), and low-density lipoprotein cholesterol (33.1 to 44.4 to 56.6%) and (b) received recommended preventive eye (26.2 to 36.4 to 58%), foot (23.4 to 40.3 to 66.9%), and renal (38.5 to 53.9 to 71%) examinations or screens. Implementation of a fully functional, specialized EHR combined with tailored office workflow process changes was associated with increased adherence to ADA guidelines, including risk factor control, by PCPs and their patients with diabetes. Incorporation of previously identified "critical success factors" potentially contributed to the success of the program, as did use of a two-phase approach. 2009 Diabetes Technology Society.

Organisational Issues for E-Learning: Critical Success Factors as Identified by HE Practitioners

ERIC Educational Resources Information Center

McPherson, Maggie; Nunes, Miguel Baptista

2006-01-01

Purpose: The purpose of this paper is to report on a research project that identified organisational critical success factors (CSFs) for e-learning implementation in higher education (HE). These CSFs can be used as a theoretical foundation upon which to base decision-making and strategic thinking about e-learning. Design/methodology/approach: The…

Leptospirosis Outbreaks in Nicaragua: Identifying Critical Areas and Exploring Drivers for Evidence-Based Planning

PubMed Central

Schneider, Maria Cristina; Nájera, Patricia; Aldighieri, Sylvain; Bacallao, Jorge; Soto, Aida; Marquiño, Wilmer; Altamirano, Lesbia; Saenz, Carlos; Marin, Jesus; Jimenez, Eduardo; Moynihan, Matthew; Espinal, Marcos

2012-01-01

Leptospirosis is an epidemic-prone zoonotic disease that occurs worldwide. In Central America, leptospirosis outbreaks have been reported in almost all countries; Nicaragua in particular has faced several outbreaks. The objective of this study was to stratify the risk and identify “critical areas” for leptospirosis outbreaks in Nicaragua, and to perform an exploratory analysis of potential “drivers”. This ecological study includes the entire country (153 municipalities). Cases from 2004 to 2010 were obtained from the country’s health information system, demographic and socioeconomic variables from its Census, and environmental data from external sources. Criteria for risk stratification of leptospirosis were defined. Nicaragua reported 1,980 cases of leptospirosis during this period, with the highest percentage of cases (26.36%) in León, followed by Chinandega (15.35%). Among the 153 municipalities, 48 were considered critical areas, 85 were endemic and 20 silent. Using spatial and statistical analysis, the variable presenting the most evident pattern of association with critical areas defined by top quintile of incidence rate is the percentage of municipal surface occupied by the soil combination of cambisol (over pyroclastic and lava bedrock) and andosol (over a volcanic ashes foundation). Precipitation and percentage of rural population are also associated with critical areas. This methodology and findings could be used for Nicaragua’s Leptospirosis Intersectoral Plan, and to identify possible risk areas in other countries with similar drivers. PMID:23202822

Using hyperspectral imaging technology to identify diseased tomato leaves

NASA Astrophysics Data System (ADS)

Li, Cuiling; Wang, Xiu; Zhao, Xueguan; Meng, Zhijun; Zou, Wei

2016-11-01

In the process of tomato plants growth, due to the effect of plants genetic factors, poor environment factors, or disoperation of parasites, there will generate a series of unusual symptoms on tomato plants from physiology, organization structure and external form, as a result, they cannot grow normally, and further to influence the tomato yield and economic benefits. Hyperspectral image usually has high spectral resolution, not only contains spectral information, but also contains the image information, so this study adopted hyperspectral imaging technology to identify diseased tomato leaves, and developed a simple hyperspectral imaging system, including a halogen lamp light source unit, a hyperspectral image acquisition unit and a data processing unit. Spectrometer detection wavelength ranged from 400nm to 1000nm. After hyperspectral images of tomato leaves being captured, it was needed to calibrate hyperspectral images. This research used spectrum angle matching method and spectral red edge parameters discriminant method respectively to identify diseased tomato leaves. Using spectral red edge parameters discriminant method produced higher recognition accuracy, the accuracy was higher than 90%. Research results have shown that using hyperspectral imaging technology to identify diseased tomato leaves is feasible, and provides the discriminant basis for subsequent disease control of tomato plants.

Technology assessment of solar-energy systems. Part 1: An analysis of life-cycle costs of solar facilities. Part 2: Minerals critical to the development of future energy technologies in high and low solar scenarios

NASA Astrophysics Data System (ADS)

Sathaye, J.; Ruderman, H.

1981-09-01

Solar and renewable technologies account for most of the increase in material requirements for energy technologies. The analysis identified 20 minerals where domestic reserves are inadequate to meet the demand. Domestic mine capacity is inadequate for 23 minerals. However, the world wide mine production capacity is adequate to meet the US demand for all the minerals. Energy related demand can therefore provide a potential market for some of these 23 minerals provided the US has deposits that can be exploited at worldwide competitive prices. For some critical and strategic minerals such as chromium the US demand peaks during a time period different than the period during which world demand peaks. The time period differences will help smooth market fluctuations and reduce the US vulnerability. Alternative technology designs can help mitigate diverse supply disruptions or sharp price increases. Alternatives may not always be available for a specific strategic and critical mineral. Each mineral may have to be analyzed and evaluated on its own merits before comparative options can be completely analyzed.

Natural, Practical and Social Contexts of E-Learning: A Critical Realist Account for Learning and Technology

ERIC Educational Resources Information Center

Li, Z.

2013-01-01

Much of the research in educational technology with a primary concern over how technology enhances learning has been criticized as privileging the immediate learning settings over the other dimensions of learners' social life and the wider social and economic contexts in which learning and technology are located. The ability to develop a rich…

Joint Strike Figher Acquisition: Mature Critical Technologies Needed to Reduce Risks

DTIC Science & Technology

2001-10-01

Reduce Risks GAO-02-39 Report Documentation Page Report Date 00OCT2001 Report Type N/A Dates Covered (from... to) - Title and Subtitle JOINT STRIKE...FIGHTER ACQUISITION: Mature Critical Technologies Needed to Reduce Risks Contract Number Grant Number Program Element Number Author(s) Project...1Joint Strike Fighter Acquisition: Development Schedule Should Be Changed to Reduce Risks (GAO/T-NSIAD-00-132

Assessment of Stirling Technology Has Provided Critical Data Leading Toward Flight Readiness of the Stirling Converter

NASA Technical Reports Server (NTRS)

Thieme, Lanny G.

2001-01-01

The NASA Glenn Research Center is supporting the development of a Stirling converter with the Department of Energy (DOE, Germantown, Maryland) for an advanced Stirling Radioisotope Power System (SRPS) to provide spacecraft onboard electric power for NASA space science missions. A key technology assessment completed by Glenn and DOE has led to the SRPS being identified as a high-efficiency power source for such deep space missions as the Europa Orbiter and the Solar Probe. In addition, the Stirling system is now being considered for unmanned Mars rovers, especially where mission profiles may exclude the use of photovoltaic power systems, such as exploration at high Martian latitudes or for missions of long duration. The SRPS efficiency of over 20 percent will reduce the required amount of radioisotope by more than a factor of 3 in comparison to current radioisotope thermoelectric generators. This significantly reduces radioisotope cost, radiological inventory, and system cost, and it provides efficient use of scarce radioisotope resources. In support of this technology assessment, Glenn conducted a series of independent evaluations and tests to determine the technology readiness of a 55-We Stirling converter developed by Stirling Technology Company (Kennewick, Washington) and DOE. Key areas evaluated by Glenn included: 1) Radiation tolerance of materials; 2) Random vibration testing of the Stirling converter in Glenn's Structural Dynamics Lab to simulate operation in the launch environment; 3) Electromagnetic interference and compatibility (EMI/EMC) of the converter operating in Glenn's EMI lab; Independent failure modes, effects, and criticality analysis, and life and reliability 4. Independent failure modes, effects, and criticality analysis, and life and reliability assessment; and 5) SRPS cost estimate. The data from these evaluations were presented to NASA Headquarters and the Jet Propulsion Laboratory mission office by a joint industry/Government team

Advanced development and calibration of the network robustness index to identify critical road network links.

DOT National Transportation Integrated Search

2010-05-31

In this research project, transportation flexibility and reliability concepts are extended and applied : to a new method for identifying the most critical links in a road network. Current transportation : management practices typically utilize locali...

Identifying Critical Thinking Styles to Enhance Volunteer Development

ERIC Educational Resources Information Center

Gay, Keegan D.; Terry, Bryan; Lamm, Alexa J.

2015-01-01

Diversity in learning options can increase efficacy of volunteer development systems. The University of Florida Critical Thinking Inventory (UFCTI) is designed to explicate an individual's critical thinking style based upon a continuum from Seeking Information to Engagement. Static and interpretive materials are best used with individuals of a…

Evaluation of Critical Care Monitor Technology During the US Navy Strong Angel Exercise

NASA Technical Reports Server (NTRS)

Johannesen, John; Rasbury, Jack

2003-01-01

The NASA critical path road map identifies "trauma and acute medical problems" as a clinical capability risk category (http://criticalDath.isc.nasa.gov). Specific risks include major trauma, organ laceration or contusion, hemoperitoneum, pulmonary failure, pneumo- and hemothorax, burn, open bone fracture, blunt head trauma, and penetrating injury. Mitigation of these risks includes the capability for critical care monitoring. Currently, the International Space Station (ISS) Crew Health Care System (CHeCS) does not provide such a capability. The Clinical Space Medicine Strategic Planning Forum (4/8/97), sponsored by NASA Medical Operations, identified the development of trauma care capabilities as one of the top priorities for space medicine. The Clinical Care Capability Development Project (CCCDP) subsequently undertook the task to address this need.

Evaluation of Critical Thinking in Higher Education in Oman

ERIC Educational Resources Information Center

Kumar.R, Renjith; James, Rajani

2015-01-01

The study aims to identify the critical level thinking of students in higher education. It is focused to evaluate the level of critical thinking variables among the students in Nizwa College of Technology and to determine whether these variables are influenced by gender and department. The data for the research is collected from 281 diploma…

Universal Design for Learning: Critical Need Areas for People with Learning Disabilities

ERIC Educational Resources Information Center

Strobel, Wendy; Arthanat, Sajay; Bauer, Stephen; Flagg, Jennifer

2007-01-01

The primary market research outlined in this paper was conducted by the Rehabilitation Engineering Research Center on Technology Transfer to identify critical technology needs for people with learning disabilities. Based on the research conducted, the underlying context of these technology needs is Universal Design for Learning (UDL). The paper…

Identifying driving gene clusters in complex diseases through critical transition theory

NASA Astrophysics Data System (ADS)

Wolanyk, Nathaniel; Wang, Xujing; Hessner, Martin; Gao, Shouguo; Chen, Ye; Jia, Shuang

A novel approach of looking at the human body using critical transition theory has yielded positive results: clusters of genes that act in tandem to drive complex disease progression. This cluster of genes can be thought of as the first part of a large genetic force that pushes the body from a curable, but sick, point to an incurable diseased point through a catastrophic bifurcation. The data analyzed is time course microarray blood assay data of 7 high risk individuals for Type 1 Diabetes who progressed into a clinical onset, with an additional larger study requested to be presented at the conference. The normalized data is 25,000 genes strong, which were narrowed down based on statistical metrics, and finally a machine learning algorithm using critical transition metrics found the driving network. This approach was created to be repeatable across multiple complex diseases with only progression time course data needed so that it would be applicable to identifying when an individual is at risk of developing a complex disease. Thusly, preventative measures can be enacted, and in the longer term, offers a possible solution to prevent all Type 1 Diabetes.

Composite Artistry Meets Facial Recognition Technology: Exploring the Use of Facial Recognition Technology to Identify Composite Images

DTIC Science & Technology

2011-09-01

be submitted into a facial recognition program for comparison with millions of possible matches, offering abundant opportunities to identify the...to leverage the robust number of comparative opportunities associated with facial recognition programs. This research investigates the efficacy of...combining composite forensic artistry with facial recognition technology to create a viable investigative tool to identify suspects, as well as better

Educational Technology: Identifying the Effects.

ERIC Educational Resources Information Center

Hawkes, Mark; Cambre, Marge

2001-01-01

An evaluation of two school "telecommunities" in Ohio and South Dakota demonstrated the importance of studying a range of technology effectiveness indicators: standardized measures, behavior, stakeholder involvement, technology competency, multicultural exchange, equity, new student and teacher roles, learning climate, teacher…

Development and Use of Health-Related Technologies in Indigenous Communities: Critical Review

PubMed Central

Jacklin, Kristen; O'Connell, Megan E

2017-01-01

Background Older Indigenous adults encounter multiple challenges as their age intersects with health inequities. Research suggests that a majority of older Indigenous adults prefer to age in place, and they will need culturally safe assistive technologies to do so. Objective The aim of this critical review was to examine literature concerning use, adaptation, and development of assistive technologies for health purposes by Indigenous peoples. Methods Working within Indigenous research methodologies and from a decolonizing approach, searches of peer-reviewed academic and gray literature dated to February 2016 were conducted using keywords related to assistive technology and Indigenous peoples. Sources were reviewed and coded thematically. Results Of the 34 sources captured, only 2 concerned technology specifically for older Indigenous adults. Studies detailing technology with Indigenous populations of all ages originated primarily from Canada (n=12), Australia (n=10), and the United States (n=9) and were coded to four themes: meaningful user involvement and community-based processes in development, the digital divide, Indigenous innovation in technology, and health technology needs as holistic and interdependent. Conclusions A key finding is the necessity of meaningful user involvement in technology development, especially in communities struggling with the digital divide. In spite of, or perhaps because of this divide, Indigenous communities are enthusiastically adapting mobile technologies to suit their needs in creative, culturally specific ways. This enthusiasm and creativity, coupled with the extensive experience many Indigenous communities have with telehealth technologies, presents opportunity for meaningful, culturally safe development processes. PMID:28729237

Identification of critical policy issues for the mobility program.

DOT National Transportation Integrated Search

2012-05-01

The intent of this white paper is to identify and describe critical policy and institutional challenges that are anticipated with: Development and operations of new connected vehicle data capture and management (DCM) technologies and systems ...

Automatic process control in anaerobic digestion technology: A critical review.

PubMed

Nguyen, Duc; Gadhamshetty, Venkataramana; Nitayavardhana, Saoharit; Khanal, Samir Kumar

2015-10-01

Anaerobic digestion (AD) is a mature technology that relies upon a synergistic effort of a diverse group of microbial communities for metabolizing diverse organic substrates. However, AD is highly sensitive to process disturbances, and thus it is advantageous to use online monitoring and process control techniques to efficiently operate AD process. A range of electrochemical, chromatographic and spectroscopic devices can be deployed for on-line monitoring and control of the AD process. While complexity of the control strategy ranges from a feedback control to advanced control systems, there are some debates on implementation of advanced instrumentations or advanced control strategies. Centralized AD plants could be the answer for the applications of progressive automatic control field. This article provides a critical overview of the available automatic control technologies that can be implemented in AD processes at different scales. Copyright © 2015 Elsevier Ltd. All rights reserved.

Identifying Students with Gifts and Talents in Technology. Technology

ERIC Educational Resources Information Center

Siegle, Del

2004-01-01

Technology expertise often occurs in two types of technology activities. One area of expertise is computer programming and another is expertise as a technology consumer using hardware and software. In addition to demonstrating prowess, some students tend to exhibit passion toward one or both of these activities. Students who excel in either could…

Identifying and Researching Market Opportunities for New High Technology Products.

ERIC Educational Resources Information Center

Dunstan, Peter

Using a product called the synchro-pulse welder as a case study example, this paper discusses the activities of CSIRO (Commonwealth Scientific and Industrial Research Organisation) in identifying and marketing new high-technology products. A general discussion of CSIRO's market research plans includes two goals to be attained within the next 5…

Identifying Ghanaian Pre-Service Teachers' Readiness for Computer Use: A Technology Acceptance Model Approach

ERIC Educational Resources Information Center

Gyamfi, Stephen Adu

2016-01-01

This study extends the technology acceptance model to identify factors that influence technology acceptance among pre-service teachers in Ghana. Data from 380 usable questionnaires were tested against the research model. Utilising the extended technology acceptance model (TAM) as a research framework, the study found that: pre-service teachers'…

COST action TD1407: network on technology-critical elements (NOTICE)--from environmental processes to human health threats.

PubMed

Cobelo-García, A; Filella, M; Croot, P; Frazzoli, C; Du Laing, G; Ospina-Alvarez, N; Rauch, S; Salaun, P; Schäfer, J; Zimmermann, S

2015-10-01

The current socio-economic, environmental and public health challenges that countries are facing clearly need common-defined strategies to inform and support our transition to a sustainable economy. Here, the technology-critical elements (which includes Ga, Ge, In, Te, Nb, Ta, Tl, the Platinum Group Elements and most of the rare-earth elements) are of great relevance in the development of emerging key technologies-including renewable energy, energy efficiency, electronics or the aerospace industry. In this context, the increasing use of technology-critical elements (TCEs) and associated environmental impacts (from mining to end-of-life waste products) is not restricted to a national level but covers most likely a global scale. Accordingly, the European COST Action TD1407: Network on Technology-Critical Elements (NOTICE)-from environmental processes to human health threats, has an overall objective for creating a network of scientists and practitioners interested in TCEs, from the evaluation of their environmental processes to understanding potential human health threats, with the aim of defining the current state of knowledge and gaps, proposing priority research lines/activities and acting as a platform for new collaborations and joint research projects. The Action is focused on three major scientific areas: (i) analytical chemistry, (ii) environmental biogeochemistry and (iii) human exposure and (eco)-toxicology.

Leveraging Cognitive Technology Tools to Expand Opportunities for Critical Thinking in Elementary Mathematics

ERIC Educational Resources Information Center

Suh, Jennifer

2010-01-01

The following study describes design research in an elementary school near the metropolitan D.C. area with a diverse student population. The goal of the project was to design tasks that leveraged technology and enhance the access to critical thinking in specific mathematical concepts: data analysis and probability. It highlights the opportunities…

Identifying the critical physical demanding tasks of paramedic work: Towards the development of a physical employment standard.

PubMed

Fischer, Steven L; Sinden, Kathryn E; MacPhee, Renee S

2017-11-01

Public safety related occupations including police, fire and military commonly apply physical employment standard (PES) to facilitate job matching, an approach to evaluate if candidates demonstrate acceptable physical capabilities as required to perform the job safely and effectively. In Canada, paramedics remain as one of the few public safety occupations without an evidence-based, validated PES. The purpose of this study was to document and describe the physical demands of paramedic work and to identify the most physically demanding tasks. These outcomes are essential to inform the design and development of an evidence-based PES for the paramedic sector. Physical demands of paramedic work were documented and described using a direct observation-based task analysis technique. Five paramedic's were trained to document the physical demands of their work, then applied their training to observe more than 90 calls over the course of 20 full 12-h work shifts. Physical demands data were then listed in a survey, administered service-wide, where 155 frontline paramedics identified critically demanding tasks and rank-ordered physical demands from not physically demanding to very strongly demanding. Critically important and physically demanding tasks were identified such as: transferring a patient; loading or unloading a stretcher in to or out of the ambulance; performing CPR; and, raising and lowering a stretcher. It is important that a paramedic-based PES evaluate a candidate's physical capabilities to perform the critical and physically demanding tasks identified in this study. Copyright © 2017 Elsevier Ltd. All rights reserved.

Three-year program to improve critical 1-micron Qsw laser technology for Earth observation

NASA Astrophysics Data System (ADS)

Sakaizawa, Daisuke; Chishiki, Yoshikazu; Satoh, Yohei; Hanada, Tatsuyuki; Yamakawa, Shiro; Ogawa, Takayo; Wada, Satoshi; Ishii, Shoken; Mizutani, Kohei; Yasui, Motoaki

2012-11-01

Laser remote sensing technologies are valuable for a variety of scientific requirements. These measurement techniques are involved in several earth science areas, including atmospheric chemistry, aerosols and clouds, wind speed and directions, prediction of pollution, oceanic mixed layer depth, vegetation canopy height (biomass), ice sheet, surface topography, and others. Much of these measurements have been performed from the ground to aircraft over the past decades. To improve knowledge of these science areas with transport models (e.g. AGCM), further advances of vertical profile are required. JAXA collaborated with NICT and RIKEN started a new cross-sectional 3-year program to improve a technology readiness of the critical 1-micron wavelengths from 2011. The efficient frequency conversions such as second and third harmonic generation and optical parametric oscillation/generation are applied. A variety of elements are common issues to lidar instruments, which includes heat rejection using high thermal conductivity materials, laser diode life time and reliability, wavelength control, and suppression of contamination control. And the program has invested in several critical areas including advanced laser transmitter technologies to enable science measurements and improvement of knowledge for space-based laser diode arrays, Pockels cells, advanced nonlinear wavelength conversion technology for space-based LIDIRs. Final goal is aim to realize 15 watt class Q-switched pulse laser over 3-year lifetime.

DEVELOPMENT OF PROTOCOLS TO IDENTIFY CRITICAL ECOSYSTEMS

EPA Science Inventory

Healthy, functioning ecosystems are critical to the sustainability of human and natural communities, but the identification of areas of healthy ecosystems in an area as large as Region 5 is difficult due to time and information constraints. Geographic Information Systems (GIS) a...

Fifth Annual EDUCAUSE Survey Identifies Current IT Issues

ERIC Educational Resources Information Center

Spicer, Donald Z.; DeBlois, Peter B.

2004-01-01

This year marks the fifth annual EDUCAUSE Current Issues Survey to identify what campus information technology leaders see as their most critical IT challenges. Thirty-five percent (571) of the 1,638 EDUCAUSE primary member representatives who were asked to participate responded to an e-mail invitation to complete the Web-based survey in December…

Technology-enhanced teacher development in rural Bangladesh: A critical realist evaluation of the context.

PubMed

Jamil, Md Golam

2018-08-01

This study arose in response to the complexity of implementing technology-enhanced learning for teacher development in a developing country. Bangladesh is a country with growing technological capacity including mobile phone network coverage, yet it faces vast challenges of utilising these facilities in the education sector. As educational change and technological innovation do not happen in a vacuum, the researcher used a critical realist approach to understand the layers of the rural Bangladesh context where technology-enhanced learning will take place. Findings have been drawn from survey data (n = 207) and a series of six focus group sessions with the same six stakeholders, informing future technology-enhanced teacher development programmes. The implications of the study are to suggest principles for pedagogical change and a methodological approach which attends to context. Copyright © 2018 Elsevier Ltd. All rights reserved.

Nuclear power technology requirements for NASA exploration missions

NASA Technical Reports Server (NTRS)

Bloomfield, Harvey S.

1990-01-01

It is pointed out that future exploration of the moon and Mars will mandate developments in many areas of technology. In particular, major advances will be required in planet surface power systems. Critical nuclear technology challenges that can enable strategic self-sufficiency, acceptable operational costs, and cost-effective space transportation goals for NASA exploration missions have been identified. Critical technologies for surface power systems include stationary and mobile nuclear reactor and radioisotope heat sources coupled to static and dynamic power conversion devices. These technologies can provide dramatic reductions in mass, leading to operational and transportation cost savings. Critical technologies for space transportation systems include nuclear thermal rocket and nuclear electric propulsion options, which present compelling concepts for significantly reducing mass, cost, or travel time required for Earth-Mars transport.

Bridging technology and clinical practice: innovating inpatient hyperglycaemia management in non-critical care settings.

PubMed

Thabit, H; Hovorka, R

2018-04-01

Emerging evidence shows that suboptimal glycaemic control is associated with increased morbidity and length of stay in hospital. Various guidelines for safe and effective inpatient glycaemic control in the non-critical care setting have been published. In spite of this, implementation in practice remains limited because of the increasing number of people with diabetes admitted to hospital and staff work burden. The use of technology in the outpatient setting has led to improved glycaemic outcomes and quality of life for people with diabetes. There remains an unmet need for technology utilisation in inpatient hyperglycaemia management in the non-critical care setting. Novel technologies have the potential to provide benefits in diabetes care in hospital by improving efficacy, safety and efficiency. Rapid analysis of glucose measurements by point-of-care devices help facilitate clinical decision-making and therapy adjustment in the hospital setting. Glucose treatment data integration with computerized glucose management systems underpins the effective use of decision support systems and may streamline clinical staff workflow. Continuous glucose monitoring and automation of insulin delivery through closed-loop systems may provide a safe and efficacious tool for hospital staff to manage inpatient hyperglycaemia whilst reducing staff workload. This review summarizes the evidence with regard to technological methods to manage inpatient glycaemic control, their limitations and the future outlook, as well as potential strategies by healthcare organizations such as the National Health Service to mediate the adoption, procurement and use of diabetes technologies in the hospital setting. © 2017 Diabetes UK.

Making processes reliable: a validated pubmed search strategy for identifying new or emerging technologies.

PubMed

Varela-Lema, Leonora; Punal-Riobóo, Jeanette; Acción, Beatriz Casal; Ruano-Ravina, Alberto; García, Marisa López

2012-10-01

Horizon scanning systems need to handle a wide range of sources to identify new or emerging health technologies. The objective of this study is to develop a validated Medline bibliographic search strategy (PubMed search engine) to systematically identify new or emerging health technologies. The proposed Medline search strategy combines free text terms commonly used in article titles to denote innovation within index terms that make reference to the specific fields of interest. Efficacy was assessed by running the search over a period of 1 year (2009) and analyzing its retrieval performance (number and characteristics). For comparison purposes, all article abstracts published during 2009 in six preselected key research journals and eight high impact surgery journals were scanned. Sensitivity was defined as the proportion of relevant new or emerging technologies published in key journals that would be identified in the search strategy within the first 2 years of publication. The search yielded 6,228 abstracts of potentially new or emerging technologies. Of these, 459 were classified as new or emerging (383 truly new or emerging and 76 new indications). The scanning of 12,061 journal abstracts identified 35 relevant new or emerging technologies. Of these, twenty-nine were located within the Medline search strategy during the first 2 years of publication (sensitivity = 83 percent). The current search strategy, validated against key journals, has demonstrated to be effective for horizon scanning. Even though it can require adaptations depending on the scope of the horizon scanning system, it could serve to simplify and standardize scanning processes.

A New Roman World: Using Virtual Reality Technology as a Critical Teaching Tool.

ERIC Educational Resources Information Center

Kuo, Elaine W.; Levis, Marc R.

The purpose of this study is to examine how technology, namely virtual reality (VR), can be developed as a critical pedagogical tool. More specifically, the study explores whether the use of VR can challenge the traditional lecture format and make the classroom a more student-centered environment. In this instance, VR is defined as a set of…

Criticality of Low-Energy Protons in Single-Event Effects Testing of Highly-Scaled Technologies

NASA Technical Reports Server (NTRS)

Pellish, Jonathan Allen; Marshall, Paul W.; Rodbell, K. P.; Gordon, M. S.; LaBel, K. A.; Schwank, J. R.; Dodds, N. A.; Castaneda, C. M.; Berg, M. D.; Kim, H. S.;

Critical joints in large composite primary aircraft structures. Volume 2: Technology demonstration test report

NASA Technical Reports Server (NTRS)

Bunin, Bruce L.

1985-01-01

A program was conducted to develop the technology for critical structural joints in composite wing structure that meets all the design requirements of a 1990 commercial transport aircraft. The results of four large composite multirow bolted joint tests are presented. The tests were conducted to demonstrate the technology for critical joints in highly loaded composite structure and to verify the analytical methods that were developed throughout the program. The test consisted of a wing skin-stringer transition specimen representing a stringer runout and skin splice on the wing lower surface at the side of the fuselage attachment. All tests were static tension tests. The composite material was Toray T-300 fiber with Ciba-Geigy 914 resin in 10 mil tape form. The splice members were metallic, using combinations of aluminum and titanium. Discussions are given of the test article, instrumentation, test setup, test procedures, and test results for each of the four specimens. Some of the analytical predictions are also included.

Innovative new technologies to identify and treat traumatic brain injuries: crossover technologies and approaches between military and civilian applications.

PubMed

Doarn, Charles R; McVeigh, Francis; Poropatich, Ronald

2010-04-01

Traumatic brain injury (TBI) has become the signature injury of Operation Iraqi Freedom and Operation Enduring Freedom. The use of improvised explosive devices has seen an exponential increase in both Iraq and Afghanistan. In previous conflicts prior to Iraq, survivability of such an injury was far less. Today, technological improvements in trauma care have increased an injured warfighter's chance of survival. A reduction in severe TBI has been achieved but an increase in mild or moderate TBI has been observed. The consequences of this kind of injury can be both physical and mental and can often be hidden or even misdiagnosed. The U.S. Army is interested in pursuing technological solutions for early detection and treatment of TBI to reduce its lasting impact on the warfighter. Such technological breakthroughs have benefit beyond the military, as TBI is a high probable event in nonmilitary settings as well. To gauge what technologies or methods are currently available, the U.S. Army's Telemedicine and Advanced Technology Research Center partnered with the American Telemedicine Association to organize and conduct a discipline-specific symposium entitled "Innovative New Technologies to Identify and Treat Traumatic Brain Injuries: Crossover Technologies and Approaches Between Military and Civilian Applications." This symposium was held in Palm Springs, CA, in September 2009. The purpose of the meeting was to provide a unique opportunity for leaders from disparate organizations involved in telemedicine and related other activities to meet and explore opportunities to collaborate in new partnership models. The meeting was designed to help Telemedicine and Advanced Technology Research Center identify opportunities to expand strategic operations and form new alliances. This report summarizes this symposium while raising awareness for collaboration into better ways of adapting and adopting technologies to address this growing health issue.

Development and Use of Health-Related Technologies in Indigenous Communities: Critical Review.

PubMed

Jones, Louise; Jacklin, Kristen; O'Connell, Megan E

2017-07-20

Older Indigenous adults encounter multiple challenges as their age intersects with health inequities. Research suggests that a majority of older Indigenous adults prefer to age in place, and they will need culturally safe assistive technologies to do so. The aim of this critical review was to examine literature concerning use, adaptation, and development of assistive technologies for health purposes by Indigenous peoples. Working within Indigenous research methodologies and from a decolonizing approach, searches of peer-reviewed academic and gray literature dated to February 2016 were conducted using keywords related to assistive technology and Indigenous peoples. Sources were reviewed and coded thematically. Of the 34 sources captured, only 2 concerned technology specifically for older Indigenous adults. Studies detailing technology with Indigenous populations of all ages originated primarily from Canada (n=12), Australia (n=10), and the United States (n=9) and were coded to four themes: meaningful user involvement and community-based processes in development, the digital divide, Indigenous innovation in technology, and health technology needs as holistic and interdependent. A key finding is the necessity of meaningful user involvement in technology development, especially in communities struggling with the digital divide. In spite of, or perhaps because of this divide, Indigenous communities are enthusiastically adapting mobile technologies to suit their needs in creative, culturally specific ways. This enthusiasm and creativity, coupled with the extensive experience many Indigenous communities have with telehealth technologies, presents opportunity for meaningful, culturally safe development processes. ©Louise Jones, Kristen Jacklin, Megan E O'Connell. Originally published in the Journal of Medical Internet Research (http://www.jmir.org), 20.07.2017.

Gas-turbine critical research and advanced technology support project

NASA Technical Reports Server (NTRS)

Clark, J. S.; Hodge, P. E.; Lowell, C. E.; Anderson, D. N.; Schultz, D. F.

1981-01-01

A technology data base for utility gas turbine systems capable of burning coal derived fuels was developed. The following areas are investigated: combustion; materials; and system studies. A two stage test rig is designed to study the conversion of fuel bound nitrogen to NOx. The feasibility of using heavy fuels in catalytic combustors is evaluated. A statistically designed series of hot corrosion burner rig tests was conducted to measure the corrosion rates of typical gas turbine alloys with several fuel contaminants. Fuel additives and several advanced thermal barrier coatings are tested. Thermal barrier coatings used in conjunction with low critical alloys and those used in a combined cycle system in which the stack temperature was maintained above the acid corrosion temperature are also studied.

Exemplar Practices for Department of Defense Technology Transfer

DTIC Science & Technology

2013-01-01

2):176–183. Ruegg, R. 2000. “Delivering Public Benefits with Private-Sector Efficiency.” In Advanced Technology Program : Assessing Outcomes, edited ...The literature identified the following critical factors for a successful technology transfer program : an effective ORTA, engaged researchers, well...experts, and stakeholders. These interviews were held between June and September 2012. Programs and processes identified during the discussions

An Analytic Hierarchy Process-based Method to Rank the Critical Success Factors of Implementing a Pharmacy Barcode System.

PubMed

Alharthi, Hana; Sultana, Nahid; Al-Amoudi, Amjaad; Basudan, Afrah

2015-01-01

Pharmacy barcode scanning is used to reduce errors during the medication dispensing process. However, this technology has rarely been used in hospital pharmacies in Saudi Arabia. This article describes the barriers to successful implementation of a barcode scanning system in Saudi Arabia. A literature review was conducted to identify the relevant critical success factors (CSFs) for a successful dispensing barcode system implementation. Twenty-eight pharmacists from a local hospital in Saudi Arabia were interviewed to obtain their perception of these CSFs. In this study, planning (process flow issues and training requirements), resistance (fear of change, communication issues, and negative perceptions about technology), and technology (software, hardware, and vendor support) were identified as the main barriers. The analytic hierarchy process (AHP), one of the most widely used tools for decision making in the presence of multiple criteria, was used to compare and rank these identified CSFs. The results of this study suggest that resistance barriers have a greater impact than planning and technology barriers. In particular, fear of change is the most critical factor, and training is the least critical factor.

The engagement of children with disabilities in health-related technology design processes: identifying methodology.

PubMed

Allsop, Matthew J; Holt, Raymond J; Levesley, Martin C; Bhakta, Bipinchandra

2010-01-01

This review aims to identify research methodology that is suitable for involving children with disabilities in the design of healthcare technology, such as assistive technology and rehabilitation equipment. A review of the literature included the identification of methodology that is available from domains outside of healthcare and suggested a selection of available methods. The need to involve end users within the design of healthcare technology was highlighted, with particular attention to the need for greater levels of participation from children with disabilities within all healthcare research. Issues that may arise when trying to increase such involvement included the need to consider communication via feedback and tailored information, the need to measure levels of participation occurring in current research, and caution regarding the use of proxy information. Additionally, five suitable methods were highlighted that are available for use with children with disabilities in the design of healthcare technology. The methods identified in the review need to be put into practice to establish effective and, if necessary, novel ways of designing healthcare technology when end users are children with disabilities.

Identifying and tracking disaster victims: state-of-the-art technology review.

PubMed

Pate, Barbara L

2008-01-01

The failure of our nation to adequately track victims of Hurricane Katrina has been identified as a major weakness of national and local disaster preparedness plans. This weakness has prompted government and private industries to acknowledge that existing paper-based tracking systems are incapable of managing information during a large-scale disaster. In response to this need, efforts are under way to develop new technologies that allow instant access to identity and location information during emergency situations. The purpose of this article is to provide a review of state-of-the-art technologies, with implications and limitations for use during mass casualty incidents.

A model for technology assessment applied to pulse oximetry. The Technology Assessment Task Force of the Society of Critical Care Medicine.

PubMed

1993-04-01

To test a model for the assessment of critical care technology. To develop practice guidelines for the use of pulse oximetry. A computer-assisted search of the English language literature and interviews with recognized experts in the field of pulse oximetry. Those studies that addressed one or more of the seven questions contained in our technology assessment template were analyzed. Study design was not a factor in article selection. However, the lack of well-designed clinical outcome studies was an important factor in determining the method of practice policy development we utilized. A focus person summarized the data from the selected studies that related to each of the seven assessment questions. The preliminary data summary developed by the focus person was further analyzed and refined by the task force and then sent to 16 expert reviewers for comment. These expert comments were considered by the task force, and this final consensus report was developed. Pulse oximetry combines the principles of spectrophotometry and plethysmography to noninvasively measure oxygen saturation with a high degree of accuracy over the range of 80% to 100% saturation, assuming the device is being used according to the manufacturer's instructions and without any adverse operating conditions. The appropriate clinical uses of pulse oximetry fall into one of two broad categories: as a warning system based on continuous real-time measurement of arterial desaturation, or as an end-point for titration of therapeutic interventions. There are no published studies that allow for definitive, outcome-based conclusions concerning either the clinical impact or cost-benefit ratio of pulse oximetry. The model developed for technology assessment proved to be appropriate for assessing pulse oximetry. The available data have allowed us to develop an evidence-based practice policy for the use of pulse oximetry in critical care. Critical care clinicians, researchers, and industry have a shared

Information Technology and Community Restoration Studies/Task 1: Information Technology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Upton, Jaki F.; Lesperance, Ann M.; Stein, Steven L.

2009-11-19

Executive Summary The Interagency Biological Restoration Demonstration—a program jointly funded by the Department of Defense's Defense Threat Reduction Agency and the Department of Homeland Security's (DHS's) Science and Technology Directorate—is developing policies, methods, plans, and applied technologies to restore large urban areas, critical infrastructures, and Department of Defense installations following the intentional release of a biological agent (anthrax) by terrorists. There is a perception that there should be a common system that can share information both vertically and horizontally amongst participating organizations as well as support analyses. A key question is: "How far away from this are we?" As partmore » of this program, Pacific Northwest National Laboratory conducted research to identify the current information technology tools that would be used by organizations in the greater Seattle urban area in such a scenario, to define criteria for use in evaluating information technology tools, and to identify current gaps. Researchers interviewed 28 individuals representing 25 agencies in civilian and military organizations to identify the tools they currently use to capture data needed to support operations and decision making. The organizations can be grouped into five broad categories: defense (Department of Defense), environmental/ecological (Environmental Protection Agency/Ecology), public health and medical services, emergency management, and critical infrastructure. The types of information that would be communicated in a biological terrorism incident include critical infrastructure and resource status, safety and protection information, laboratory test results, and general emergency information. The most commonly used tools are WebEOC (web-enabled crisis information management systems with real-time information sharing), mass notification software, resource tracking software, and NW WARN (web-based information to protect critical

Technology Thresholds for Microgravity: Status and Prospects

NASA Technical Reports Server (NTRS)

Noever, D. A.

1996-01-01

The technological and economic thresholds for microgravity space research are estimated in materials science and biotechnology. In the 1990s, the improvement of materials processing has been identified as a national scientific priority, particularly for stimulating entrepreneurship. The substantial US investment at stake in these critical technologies includes six broad categories: aerospace, transportation, health care, information, energy, and the environment. Microgravity space research addresses key technologies in each area. The viability of selected space-related industries is critically evaluated and a market share philosophy is developed, namely that incremental improvements in a large markets efficiency is a tangible reward from space-based research.

OAST Technology for the Future. Executive Summary

NASA Technical Reports Server (NTRS)

1988-01-01

NASA's Office of Aeronautics and Space Technology (OAST) conducted a workshop on the In-Space Technology Experiments Program (IN-STEP) December 6-9, 1988, in Atlanta, Georgia. The purpose of this workshop was to identify and prioritize space technologies which are critical for future national space programs and which require validation in the space environment. A secondary objective was to review the current NASA (In-Reach) and Industry/University (Out-Reach) experiments. Finally, the aerospace community was requested to review and comment on the proposed plans for the continuation of the In-Space Technology Experiments Program. In particular, the review included the proposed process for focusing the next experiment selection on specific, critical technologies and the process for implementing the hardware development and integration on the Space Shuttle vehicle. The product of the workshop was a prioritized listing of the critical space technology needs in each of eight technology disciplines. These listings were the cumulative recommendations of nearly 400 participants, which included researchers, technologists, and managers from aerospace industries, universities, and government organizations.

Global flows of critical metals necessary for low-carbon technologies: the case of neodymium, cobalt, and platinum.

PubMed

Nansai, Keisuke; Nakajima, Kenichi; Kagawa, Shigemi; Kondo, Yasushi; Suh, Sangwon; Shigetomi, Yosuke; Oshita, Yuko

2014-01-01

This study, encompassing 231 countries and regions, quantifies the global transfer of three critical metals (neodymium, cobalt, and platinum) considered vital for low-carbon technologies by means of material flow analysis (MFA), using trade data (BACI) and the metal contents of trade commodities, resolving the optimization problem to ensure the material balance of the metals within each country and region. The study shows that in 2005 international trade led to global flows of 18.6 kt of neodymium, 154 kt of cobalt, and 402 t of platinum and identifies the main commodities and top 50 bilateral trade links embodying these metals. To explore the issue of consumption efficiency, the flows were characterized according to the technological level of each country or region and divided into three types: green ("efficient use"), yellow ("moderately efficient use"), and red ("inefficient use"). On this basis, the shares of green, yellow, and red flows in the aggregate global flow of Nd were found to be 1.2%, 98%, and 1.2%, respectively. For Co, the respective figures are 53%, 28%, and 19%, and for Pt 15%, 84%, and 0.87%. Furthermore, a simple indicator focusing on the composition of the three colored flows for each commodity was developed to identify trade commodities that should be prioritized for urgent technical improvement to reduce wasteful use of the metals. Based on the indicator, we discuss logical, strategic identification of the responsibilities and roles of the countries involved in the global flows.

Human spaceflight technology needs-a foundation for JSC's technology strategy

NASA Astrophysics Data System (ADS)

Stecklein, J. M.

Human space exploration has always been heavily influenced by goals to achieve a specific mission on a specific schedule. This approach drove rapid technology development, the rapidity of which added risks and became a major driver for costs and cost uncertainty. The National Aeronautics and Space Administration (NASA) is now approaching the extension of human presence throughout the solar system by balancing a proactive yet less schedule-driven development of technology with opportunistic scheduling of missions as the needed technologies are realized. This approach should provide cost effective, low risk technology development that will enable efficient and effective manned spaceflight missions. As a first step, the NASA Human Spaceflight Architecture Team (HAT) has identified a suite of critical technologies needed to support future manned missions across a range of destinations, including in cis-lunar space, near earth asteroid visits, lunar exploration, Mars moons, and Mars exploration. The challenge now is to develop a strategy and plan for technology development that efficiently enables these missions over a reasonable time period, without increasing technology development costs unnecessarily due to schedule pressure, and subsequently mitigating development and mission risks. NASA's Johnson Space Center (JSC), as the nation's primary center for human exploration, is addressing this challenge through an innovative approach in allocating Internal Research and Development funding to projects. The HAT Technology Needs (Tech Needs) Database has been developed to correlate across critical technologies and the NASA Office of Chief Technologist Technology Area Breakdown Structure (TABS). The TechNeeds Database illuminates that many critical technologies may support a single technical capability gap, that many HAT technology needs may map to a single TABS technology discipline, and that a single HAT technology need may map to multiple TABS technology disciplines. Th

Human Spaceflight Technology Needs - A Foundation for JSC's Technology Strategy

NASA Technical Reports Server (NTRS)

Stecklein, Jonette M.

2013-01-01

Human space exploration has always been heavily influenced by goals to achieve a specific mission on a specific schedule. This approach drove rapid technology development, the rapidity of which adds risks as well as provides a major driver for costs and cost uncertainty. The National Aeronautics and Space Administration (NASA) is now approaching the extension of human presence throughout the solar system by balancing a proactive yet less schedule-driven development of technology with opportunistic scheduling of missions as the needed technologies are realized. This approach should provide cost effective, low risk technology development that will enable efficient and effective manned spaceflight missions. As a first step, the NASA Human Spaceflight Architecture Team (HAT) has identified a suite of critical technologies needed to support future manned missions across a range of destinations, including in cis-lunar space, near earth asteroid visits, lunar exploration, Mars moons, and Mars exploration. The challenge now is to develop a strategy and plan for technology development that efficiently enables these missions over a reasonable time period, without increasing technology development costs unnecessarily due to schedule pressure, and subsequently mitigating development and mission risks. NASA's Johnson Space Center (JSC), as the nation s primary center for human exploration, is addressing this challenge through an innovative approach in allocating Internal Research and Development funding to projects. The HAT Technology Needs (TechNeeds) Database has been developed to correlate across critical technologies and the NASA Office of Chief Technologist Technology Area Breakdown Structure (TABS). The TechNeeds Database illuminates that many critical technologies may support a single technical capability gap, that many HAT technology needs may map to a single TABS technology discipline, and that a single HAT technology need may map to multiple TABS technology

Materials technology assessment for stirling engines

NASA Technical Reports Server (NTRS)

Stephens, J. R.; Witzke, W. R.; Watson, G. K.; Johnston, J. R.; Croft, W. J.

1977-01-01

A materials technology assessment of high temperature components in the improved (metal) and advanced (ceramic) Stirling engines was undertaken to evaluate the current state-of-the-art of metals and ceramics, identify materials research and development required to support the development of automotive Stirling engines, and to recommend materials technology programs to assure material readiness concurrent with engine system development programs. The most critical component for each engine is identified and some of the material problem areas are discussed.

Gas turbine critical research and advanced technology (CRT) support project

NASA Technical Reports Server (NTRS)

Furman, E. R.; Anderson, D. N.; Gedwill, M. A.; Lowell, C. E.; Schultz, D. F.

1982-01-01

The technical progress to provide a critical technology base for utility gas turbine systems capable of burning coal-derived fuels is summarized. Project tasks include the following: (1) combustion - to investigate the combustion of coal-derived fuels and the conversion of fuel-bound nitrogen to NOx; (2) materials - to understand and prevent the hot corrosion of turbine hot section materials; and (3) system studies - to integrate and guide the technological efforts. Technical accomplishments include: an extension of flame tube combustion testing of propane - Toluene Fuel Mixtures to vary H2 content from 9 to 18 percent by weight and the comparison of results with that predicted from a NASA Lewis General Chemical Kinetics Computer Code; the design and fabrication of combustor sector test section to test current and advanced combustor concepts; Testing of Catalytic combustors with residual and coal-derived liquid fuels; testing of high strength super alloys to evaluate their resistance to potential fuel impurities using doped clean fuels and coal-derived liquids; and the testing and evaluation of thermal barrier coatings and bond coatings on conventional turbine materials.

Tactical radar technology study. Volume 1: Executive summary

NASA Astrophysics Data System (ADS)

Rosien, R.; Cardone, L.; Hammers, D.; Klein, A.; Nozawa, E.

1980-03-01

This report presents results of a study to identify new technology required to provide advanced multi-threat performance capabilities in future tactical surveillance radar designs. A baseline design with optional subsystem characteristics has been synthesized to provide both functional and operational survivability in a dynamic and hostile situation postulated for the post 1985 time frame. Comparisons have been made of available technology with that required by the new baseline design to identify new technology requirements. Recommendations are presented for critical new technology programs including estimates of technical risks, costs and required development time.

Approaches to Identifying the Emerging Innovative Water Technology Industry in the United States

PubMed Central

WOOD, ALLISON R.; HARTEN, TERESA; GUTIERREZ, SALLY C.

2018-01-01

Clean water is vital to sustaining our natural environment, human health, and our economy. As infrastructure continues to deteriorate and water resources become increasingly threatened, new technologies will be needed to ensure safe and sustainable water in the future. Though the US water industry accounts for approximately 1% gross domestic product and regional “clusters” for water technology exist throughout the country, this emerging industry has not been captured by recent studies. As use of the term “cluster” becomes more prevalent, regional mapping efforts have revealed international differences in definition yet showcase this industry’s economic impact. In reality, institutional processes may inhibit altering industry coding to better describe water technology. Forgoing the benefits of national economic tracking, alternative data sets are available, which may support new ways of identifying these clusters. This work provides cluster definitions; summarizes current approaches to identifying industry activity using data, interviews, and literature; and sets a foundation for future research. PMID:29937546

Approaches to Identifying the Emerging Innovative Water Technology Industry in the United States.

PubMed

Wood, Allison R; Harten, Teresa; Gutierrez, Sally C

2018-04-25

Clean water is vital to sustaining our natural environment, human health, and our economy. As infrastructure continues to deteriorate and water resources become increasingly threatened, new technologies will be needed to ensure safe and sustainable water in the future. Though the US water industry accounts for approximately 1% gross domestic product and regional "clusters" for water technology exist throughout the country, this emerging industry has not been captured by recent studies. As use of the term "cluster" becomes more prevalent, regional mapping efforts have revealed international differences in definition yet showcase this industry's economic impact. In reality, institutional processes may inhibit altering industry coding to better describe water technology. Forgoing the benefits of national economic tracking, alternative data sets are available, which may support new ways of identifying these clusters. This work provides cluster definitions; summarizes current approaches to identifying industry activity using data, interviews, and literature; and sets a foundation for future research.

Enhanced Geothermal Systems (EGS) Well Construction Technology Evaluation Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Polsky, Yarom; Capuano, Louis; Finger, John

2008-12-01

This report provides an assessment of well construction technology for EGS with two primary objectives: 1. Determining the ability of existing technologies to develop EGS wells. 2. Identifying critical well construction research lines and development technologies that are likely to enhance prospects for EGS viability and improve overall economics.

[Advances of studies on new technology and method for identifying traditional Chinese medicinal materials].

PubMed

Chen, Shilin; Guo, Baolin; Zhang, Guijun; Yan, Zhuyun; Luo, Guangming; Sun, Suqin; Wu, Hezhen; Huang, Linfang; Pang, Xiaohui; Chen, Jianbo

2012-04-01

In this review, the authors summarized the new technologies and methods for identifying traditional Chinese medicinal materials, including molecular identification, chemical identification, morphological identification, microscopic identification and identification based on biological effects. The authors introduced the principle, characteristics, application and prospect on each new technology or method and compared their advantages and disadvantages. In general, new methods make the result more objective and accurate. DNA barcoding technique and spectroscopy identification have their owner obvious strongpoint in universality and digitalization. In the near future, the two techniques are promising to be the main trend for identifying traditional Chinese medicinal materials. The identification techniques based on microscopy, liquid chromatography, PCR, biological effects and DNA chip will be indispensable supplements. However, the bionic identification technology is just placed in the developing stage at present.

Techniques and Technology to Revise Content Delivery and Model Critical Thinking in the Neuroscience Classroom

PubMed Central

Illig, Kurt R.

2015-01-01

Undergraduate neuroscience courses typically involve highly interdisciplinary material, and it is often necessary to use class time to review how principles of chemistry, math and biology apply to neuroscience. Lecturing and Socratic discussion can work well to deliver information to students, but these techniques can lead students to feel more like spectators than participants in a class, and do not actively engage students in the critical analysis and application of experimental evidence. If one goal of undergraduate neuroscience education is to foster critical thinking skills, then the classroom should be a place where students and instructors can work together to develop them. Students learn how to think critically by directly engaging with course material, and by discussing evidence with their peers, but taking classroom time for these activities requires that an instructor find a way to provide course materials outside of class. Using technology as an on-demand provider of course materials can give instructors the freedom to restructure classroom time, allowing students to work together in small groups and to have discussions that foster critical thinking, and allowing the instructor to model these skills. In this paper, I provide a rationale for reducing the use of traditional lectures in favor of more student-centered activities, I present several methods that can be used to deliver course materials outside of class and discuss their use, and I provide a few examples of how these techniques and technologies can help improve learning outcomes. PMID:26240525

Techniques and Technology to Revise Content Delivery and Model Critical Thinking in the Neuroscience Classroom.

PubMed

Illig, Kurt R

2015-01-01

Undergraduate neuroscience courses typically involve highly interdisciplinary material, and it is often necessary to use class time to review how principles of chemistry, math and biology apply to neuroscience. Lecturing and Socratic discussion can work well to deliver information to students, but these techniques can lead students to feel more like spectators than participants in a class, and do not actively engage students in the critical analysis and application of experimental evidence. If one goal of undergraduate neuroscience education is to foster critical thinking skills, then the classroom should be a place where students and instructors can work together to develop them. Students learn how to think critically by directly engaging with course material, and by discussing evidence with their peers, but taking classroom time for these activities requires that an instructor find a way to provide course materials outside of class. Using technology as an on-demand provider of course materials can give instructors the freedom to restructure classroom time, allowing students to work together in small groups and to have discussions that foster critical thinking, and allowing the instructor to model these skills. In this paper, I provide a rationale for reducing the use of traditional lectures in favor of more student-centered activities, I present several methods that can be used to deliver course materials outside of class and discuss their use, and I provide a few examples of how these techniques and technologies can help improve learning outcomes.

A Teacher Action Research Study: Enhancing Student Critical Thinking Knowledge, Skills, Dispositions, Application and Transfer in a Higher Education Technology Course

ERIC Educational Resources Information Center

Phelan, Jack Gordon

2012-01-01

This study examined the effects of a critical thinking instructional intervention in a higher education technology course with the purpose of determining the extent to which the intervention enhanced student critical thinking knowledge, skills, dispositions, application and transfer abilities. Historically, critical thinking has been considered…

Nuclear Data Activities in Support of the DOE Nuclear Criticality Safety Program

NASA Astrophysics Data System (ADS)

Westfall, R. M.; McKnight, R. D.

2005-05-01

The DOE Nuclear Criticality Safety Program (NCSP) provides the technical infrastructure maintenance for those technologies applied in the evaluation and performance of safe fissionable-material operations in the DOE complex. These technologies include an Analytical Methods element for neutron transport as well as the development of sensitivity/uncertainty methods, the performance of Critical Experiments, evaluation and qualification of experiments as Benchmarks, and a comprehensive Nuclear Data program coordinated by the NCSP Nuclear Data Advisory Group (NDAG). The NDAG gathers and evaluates differential and integral nuclear data, identifies deficiencies, and recommends priorities on meeting DOE criticality safety needs to the NCSP Criticality Safety Support Group (CSSG). Then the NDAG identifies the required resources and unique capabilities for meeting these needs, not only for performing measurements but also for data evaluation with nuclear model codes as well as for data processing for criticality safety applications. The NDAG coordinates effort with the leadership of the National Nuclear Data Center, the Cross Section Evaluation Working Group (CSEWG), and the Working Party on International Evaluation Cooperation (WPEC) of the OECD/NEA Nuclear Science Committee. The overall objective is to expedite the issuance of new data and methods to the DOE criticality safety user. This paper describes these activities in detail, with examples based upon special studies being performed in support of criticality safety for a variety of DOE operations.

Nebraska Industrial Technology Education Teachers Identify the Equipment Their Students Use.

ERIC Educational Resources Information Center

Rogers, George E.

A study asked 287 industrial technology education (ITE) teachers in Nebraska to identify what equipment was being used by ITE students. It also compared ITE equipment usage with regard to school type and school size. The response rate was 59.2 percent (n=170). Findings indicated the drill press and band saw were the most widely used pieces of…

Self-Organizing Feature Maps Identify Proteins Critical to Learning in a Mouse Model of Down Syndrome.

PubMed

Higuera, Clara; Gardiner, Katheleen J; Cios, Krzysztof J

2015-01-01

Down syndrome (DS) is a chromosomal abnormality (trisomy of human chromosome 21) associated with intellectual disability and affecting approximately one in 1000 live births worldwide. The overexpression of genes encoded by the extra copy of a normal chromosome in DS is believed to be sufficient to perturb normal pathways and normal responses to stimulation, causing learning and memory deficits. In this work, we have designed a strategy based on the unsupervised clustering method, Self Organizing Maps (SOM), to identify biologically important differences in protein levels in mice exposed to context fear conditioning (CFC). We analyzed expression levels of 77 proteins obtained from normal genotype control mice and from their trisomic littermates (Ts65Dn) both with and without treatment with the drug memantine. Control mice learn successfully while the trisomic mice fail, unless they are first treated with the drug, which rescues their learning ability. The SOM approach identified reduced subsets of proteins predicted to make the most critical contributions to normal learning, to failed learning and rescued learning, and provides a visual representation of the data that allows the user to extract patterns that may underlie novel biological responses to the different kinds of learning and the response to memantine. Results suggest that the application of SOM to new experimental data sets of complex protein profiles can be used to identify common critical protein responses, which in turn may aid in identifying potentially more effective drug targets.

Self-Organizing Feature Maps Identify Proteins Critical to Learning in a Mouse Model of Down Syndrome

PubMed Central

Higuera, Clara; Gardiner, Katheleen J.; Cios, Krzysztof J.

2015-01-01

Down syndrome (DS) is a chromosomal abnormality (trisomy of human chromosome 21) associated with intellectual disability and affecting approximately one in 1000 live births worldwide. The overexpression of genes encoded by the extra copy of a normal chromosome in DS is believed to be sufficient to perturb normal pathways and normal responses to stimulation, causing learning and memory deficits. In this work, we have designed a strategy based on the unsupervised clustering method, Self Organizing Maps (SOM), to identify biologically important differences in protein levels in mice exposed to context fear conditioning (CFC). We analyzed expression levels of 77 proteins obtained from normal genotype control mice and from their trisomic littermates (Ts65Dn) both with and without treatment with the drug memantine. Control mice learn successfully while the trisomic mice fail, unless they are first treated with the drug, which rescues their learning ability. The SOM approach identified reduced subsets of proteins predicted to make the most critical contributions to normal learning, to failed learning and rescued learning, and provides a visual representation of the data that allows the user to extract patterns that may underlie novel biological responses to the different kinds of learning and the response to memantine. Results suggest that the application of SOM to new experimental data sets of complex protein profiles can be used to identify common critical protein responses, which in turn may aid in identifying potentially more effective drug targets. PMID:26111164

A Critical Review of the Massachusetts Next Generation Science and Technology/Engineering Standards. Policy Brief

ERIC Educational Resources Information Center

Metzenberg, Stan

2015-01-01

Stan Metzenberg offers a critical analysis of the draft "Massachusetts Science and Technology/Engineering Standards," which are for pre-Kindergarten to Grade 8 and introductory high school courses. Metzenberg claims that the document reveals significant, unacceptable gaps in science content, as well as some notable errors and…

Progress and challenges: implementation and use of health information technology among critical-access hospitals.

PubMed

Gabriel, Meghan Hufstader; Jones, Emily B; Samy, Leila; King, Jennifer

2014-07-01

Despite major national investments to support the adoption of health information technology (IT), concerns persist that barriers are inhibiting that adoption and the use of advanced health IT capabilities in rural areas in particular. Using a survey of Medicare-certified critical-access hospitals, we examined electronic health record (EHR) adoption, key EHR functionalities, telehealth, and teleradiology, as well as challenges to EHR adoption. In 2013, 89 percent of critical-access hospitals had implemented a full or partial EHR. Adoption of key EHR capabilities varied. Critical-access hospitals that had certain types of technical assistance and resources available to support health IT were more likely to have adopted health IT capabilities and less likely to report significant challenges to EHR implementation and use, compared to other hospitals in the survey. It is important to ensure that the necessary resources and support are available to critical-access hospitals, especially those that operate independently, to assist them in adopting health IT and becoming able to electronically link to the broader health care system. Project HOPE—The People-to-People Health Foundation, Inc.

Patent Network Analysis and Quadratic Assignment Procedures to Identify the Convergence of Robot Technologies

PubMed Central

Lee, Woo Jin; Lee, Won Kyung

2016-01-01

Because of the remarkable developments in robotics in recent years, technological convergence has been active in this area. We focused on finding patterns of convergence within robot technology using network analysis of patents in both the USPTO and KIPO. To identify the variables that affect convergence, we used quadratic assignment procedures (QAP). From our analysis, we observed the patent network ecology related to convergence and found technologies that have great potential to converge with other robotics technologies. The results of our study are expected to contribute to setting up convergence based R&D policies for robotics, which can lead new innovation. PMID:27764196

Identifying early-warning signals of critical transitions with strong noise by dynamical network markers

PubMed Central

Liu, Rui; Chen, Pei; Aihara, Kazuyuki; Chen, Luonan

2015-01-01

Identifying early-warning signals of a critical transition for a complex system is difficult, especially when the target system is constantly perturbed by big noise, which makes the traditional methods fail due to the strong fluctuations of the observed data. In this work, we show that the critical transition is not traditional state-transition but probability distribution-transition when the noise is not sufficiently small, which, however, is a ubiquitous case in real systems. We present a model-free computational method to detect the warning signals before such transitions. The key idea behind is a strategy: “making big noise smaller” by a distribution-embedding scheme, which transforms the data from the observed state-variables with big noise to their distribution-variables with small noise, and thus makes the traditional criteria effective because of the significantly reduced fluctuations. Specifically, increasing the dimension of the observed data by moment expansion that changes the system from state-dynamics to probability distribution-dynamics, we derive new data in a higher-dimensional space but with much smaller noise. Then, we develop a criterion based on the dynamical network marker (DNM) to signal the impending critical transition using the transformed higher-dimensional data. We also demonstrate the effectiveness of our method in biological, ecological and financial systems. PMID:26647650

Assessing Space Exploration Technology Requirements as a First Step Towards Ensuring Technology Readiness for International Cooperation in Space Exploration

NASA Technical Reports Server (NTRS)

Laurini, Kathleen C.; Hufenbach, Bernhard; Satoh, Maoki; Piedboeuf, Jean-Claude; Neumann, Benjamin

2010-01-01

Advancing critical and enhancing technologies is considered essential to enabling sustainable and affordable human space exploration. Critical technologies are those that enable a certain class of mission, such as technologies necessary for safe landing on the Martian surface, advanced propulsion, and closed loop life support. Others enhance the mission by leading to a greater satisfaction of mission objectives or increased probability of mission success. Advanced technologies are needed to reduce mass and cost. Many space agencies have studied exploration mission architectures and scenarios with the resulting lists of critical and enhancing technologies being very similar. With this in mind, and with the recognition that human space exploration will only be enabled by agencies working together to address these challenges, interested agencies participating in the International Space Exploration Coordination Group (ISECG) have agreed to perform a technology assessment as an important step in exploring cooperation opportunities for future exploration mission scenarios. "The Global Exploration Strategy: The Framework for Coordination" was developed by fourteen space agencies and released in May 2007. Since the fall of 2008, several International Space Exploration Coordination Group (ISECG) participating space agencies have been studying concepts for human exploration of the moon. They have identified technologies considered critical and enhancing of sustainable space exploration. Technologies such as in-situ resource utilization, advanced power generation/energy storage systems, reliable dust resistant mobility systems, and closed loop life support systems are important examples. Similarly, agencies such as NASA, ESA, and Russia have studied Mars exploration missions and identified critical technologies. They recognize that human and robotic precursor missions to destinations such as LEO, moon, and near earth objects provide opportunities to demonstrate the

Ethics and health technology assessment: handmaiden and/or critic?

PubMed

Braunack-Mayer, Annette J

2006-01-01

This study examines the content and role of ethical analysis in health technology assessment (HTA) and horizon scanning publications. It proposes that ethical analysis in HTA is of at least two different types: an ethics of HTA and an ethics in HTA. I examine the critical differences between these approaches through the examples of the analysis of genetic screening for breast cancer and home blood glucose testing in diabetes. I then argue that, although both approaches subscribe to similar views concerning HTA and ethics, they use different theoretical and methodological traditions to interpret and explain them. I conclude by suggesting that we need the interpretive insights of both these approaches, taken together, to explain why ethics has not been able yet to contribute fully to HTA and to demonstrate the scope and complexity of ethical work in this domain.

The optimal blood glucose level for critically ill adult patients.

PubMed

Lv, Shaoning; Ross, Paul; Tori, Kathleen

2017-09-01

Glycaemic control is recognized as one of the important aspects in managing critically ill patients. Both hyperglycaemia and hypoglycaemia independently increase the risk of patient mortality. Hence, the identification of optimal glycaemic control is of paramount importance in the management of critically ill patients. The aim of this literature review is to examine the current status of glycaemic control in critically ill adult patients. This literature review will focus on randomized controlled trials comparing intensive insulin therapy to conventional insulin therapy, with an objective to identify optimal blood glucose level targets for critically ill adult patients. A literature review was conducted to identify large randomized controlled trials for the optimal targeted blood glucose level for critically ill adult patients published since 2000. A total of eight studies fulfilled the selection criteria of this review. With current human and technology resources, the results of the studies support commencing glycaemic control once the blood glucose level of critically ill patients reaches 10 mmol/L and maintaining this level between 8 mmol/L and 10 mmol/L. This literature review provides a recommendation for targeting the optimal blood glucose level for critically ill patients within moderate blood glucose level target range (8-10 mmol/L). The need for uniformed glucometrics for unbiased reporting and further research for optimal blood glucose target is required, especially in light of new technological advancements in closed-loop insulin delivery and monitoring devices. This literature review has revealed a need to call for consensus in the measurement and reporting of glycaemic control using standardized glucometrics. © 2017 British Association of Critical Care Nurses.

Technology transfer initiatives

NASA Technical Reports Server (NTRS)

Mccain, Wayne; Schroer, Bernard J.; Ziemke, M. Carl

1994-01-01

This report summarizes the University of Alabama in Huntsville (UAH) technology transfer activities with the Marshall Space Flight Center (MSFC) for the period of April 1993 through December 1993. Early in 1993, the MSFC/TUO and UAH conceived of the concept of developing stand-alone, integrated data packages on MSFC technology that would serve industrial needs previously determined to be critical. Furthermore, after reviewing over 500 problem statements received by MSFC, it became obvious that many of these requests could be satisfied by a standard type of response. As a result, UAH has developed two critical area response (CAR) packages: CFC (chlorofluorocarbon) replacements and modular manufacturing and simulation. Publicity included news releases, seminars, articles and conference papers. The Huntsville Chamber of Commerce established the Technology Transfer Subcommittee with the charge to identify approaches for the Chamber to assist its members, as well as non-members, access to the technologies at the federal laboratories in North Alabama. The Birmingham Chamber of Commerce has expressed interest in establishing a similar technology transfer program. This report concludes with a section containing a tabulation of the problem statements, including CAR packages, submitted to MSFC from January 1992 through December 1993.

Effects of technology on nursing care and caring attributes of a sample of Iranian critical care nurses.

PubMed

Bagherian, Behnaz; Sabzevari, Sakineh; Mirzaei, Tayebeh; Ravari, Ali

2017-04-01

To examine the association between attitudes of critical care nurses about influences of technology and their caring attributes. In a cross-sectional study, firstly the psychometric properties of caring attributes questionnaire, which was developed to examine caring attributes of a sample of international nurses, was refined in a sample of 200 critical care nurses working in educational hospitals of a city in the southwest of Iran. Results of factor analysis with Varimax rotation decreased 60 items of caring attributes to 47 items which loaded under five subscales of caring negation, caring compassionate, caring advocacy, caring essence and caring communication. Secondly, attitudes of these nurses toward influences of technology on nursing care were assessed using a 22-item questionnaire, developed by the study researchers. Finally, the association between scores of caring attributes and attitudes toward influences of technology of this sample was determined. There was a positive association between caring attributes and influences of technology among our study nurses. Caring attributes scores were higher in female single nurses. Although caring attributes' scores had decreased along with age and work experience, caring commitment was higher in older more experienced nurses. Furthermore, female nurses had a better attitude toward influences of technology on their care. In contrast, younger and less experienced nurses had negative views on the effects of technology on nursing care. Continuing education and life-long learning on application of new technological equipment in nursing care and harmonising their use with caring values are necessary for nursing students and registered nurses to ensure delivering a patient-centred care, in a technologically driven environment. Copyright © 2016 Elsevier Ltd. All rights reserved.

Human Exploration and Avionic Technology Challenges

NASA Technical Reports Server (NTRS)

Benjamin, Andrew L.

2005-01-01

For this workshop, I will identify critical avionic gaps, enabling technologies, high-pay off investment opportunities, promising capabilities, and space applications for human lunar and Mars exploration. Key technology disciplines encompass fault tolerance, miniaturized instrumentation sensors, MEMS-based guidance, navigation, and controls, surface communication networks, and rendezvous and docking. Furthermore, I will share bottom-up strategic planning relevant to manned mission -driven needs. Blending research expertise, facilities, and personnel with internal NASA is vital to stimulating collaborative technology solutions that achieve NASA grand vision. Retaining JSC expertise in unique and critical areas is paramount to our long-term success. Civil servants will maintain key roles in setting technology agenda, ensuring quality results, and integrating technologies into avionic systems and manned missions. Finally, I will present to NASA, academia, and the aerospace community some on -going and future advanced avionic technology programs and activities that are relevant to our mission goals and objectives.

Critical Review of Noninvasive Optical Technologies for Wound Imaging

PubMed Central

Jayachandran, Maanasa; Rodriguez, Suset; Solis, Elizabeth; Lei, Jiali; Godavarty, Anuradha

2016-01-01

Significance: Noninvasive imaging approaches can provide greater information about a wound than visual inspection during the wound healing and treatment process. This review article focuses on various optical imaging techniques developed to image different wound types (more specifically ulcers). Recent Advances: The noninvasive optical imaging approaches in this review include hyperspectral imaging, multispectral imaging, near-infrared spectroscopy (NIRS), diffuse reflectance spectroscopy, optical coherence tomography, laser Doppler imaging, laser speckle imaging, spatial frequency domain imaging, and fluorescence imaging. The various wounds imaged using these techniques include open wounds, chronic wounds, diabetic foot ulcers, decubitus ulcers, venous leg ulcers, and burns. Preliminary work in the development and implementation of a near-infrared optical scanner for wound imaging as a noncontact hand-held device is briefly described. The technology is based on NIRS and has demonstrated its potential to differentiate a healing from nonhealing wound region. Critical Issues: While most of the optical imaging techniques can penetrate few hundred microns to a 1–2 mm from the wound surface, NIRS has the potential to penetrate deeper, demonstrating the potential to image internal wounds. Future Directions: All the technologies are currently at various stages of translational efforts to the clinic, with NIRS holding a greater promise for physiological assessment of the wounds internal, beyond the gold-standard visual assessment. PMID:27602254

Dublin Institute of Technology's Programme for Students Learning with Communities: A Critical Account of Practice

ERIC Educational Resources Information Center

Gamble, Elena; Bates, Catherine

2011-01-01

Purpose: This paper aims to focus on the process of critically evaluating Dublin Institute of Technology's Programme for Students Learning With Communities after its first year of operation. The programme supports and promotes community-based learning/service-learning across DIT. Design/methodology/approach: The paper is presented in the form of a…

A Systematic Approach of Employing Quality by Design Principles: Risk Assessment and Design of Experiments to Demonstrate Process Understanding and Identify the Critical Process Parameters for Coating of the Ethylcellulose Pseudolatex Dispersion Using Non-Conventional Fluid Bed Process.

PubMed

Kothari, Bhaveshkumar H; Fahmy, Raafat; Claycamp, H Gregg; Moore, Christine M V; Chatterjee, Sharmista; Hoag, Stephen W

2017-05-01

The goal of this study was to utilize risk assessment techniques and statistical design of experiments (DoE) to gain process understanding and to identify critical process parameters for the manufacture of controlled release multiparticulate beads using a novel disk-jet fluid bed technology. The material attributes and process parameters were systematically assessed using the Ishikawa fish bone diagram and failure mode and effect analysis (FMEA) risk assessment methods. The high risk attributes identified by the FMEA analysis were further explored using resolution V fractional factorial design. To gain an understanding of the processing parameters, a resolution V fractional factorial study was conducted. Using knowledge gained from the resolution V study, a resolution IV fractional factorial study was conducted; the purpose of this IV study was to identify the critical process parameters (CPP) that impact the critical quality attributes and understand the influence of these parameters on film formation. For both studies, the microclimate, atomization pressure, inlet air volume, product temperature (during spraying and curing), curing time, and percent solids in the coating solutions were studied. The responses evaluated were percent agglomeration, percent fines, percent yield, bead aspect ratio, median particle size diameter (d50), assay, and drug release rate. Pyrobuttons® were used to record real-time temperature and humidity changes in the fluid bed. The risk assessment methods and process analytical tools helped to understand the novel disk-jet technology and to systematically develop models of the coating process parameters like process efficiency and the extent of curing during the coating process.

The use of arithmetic average method in identifying critical success criteria for Homestay Programmes

NASA Astrophysics Data System (ADS)

Daud, Shahidah Md; Ramli, Razamin; Kasim, Maznah Mat; Kayat, Kalsom; Razak, Rafidah Abd

2015-12-01

Malaysian Homestay is very unique. It is classified as Community Based Tourism (CBT). Homestay Programme which is a community events where a tourist stays together with a host family for a period of time and enjoying cultural exchange besides having new experiences. Homestay programme has booming the tourism industry since there is over 100 Homestay Programme currently being registered with the Ministry of Culture and Tourism Malaysia. However, only few Homestay Programme enjoying the benefits of success Homestay Programme. Hence, this article seeks to identify the critical success factors for a Homestay Programme in Malaysia. An Arithmetic Average method is utilized to further evaluate the identified success factors in a more meaningful way. The findings will help Homestay Programme function as a community development tool that manages tourism resources. Thus, help the community in improving local economy and creating job opportunities.

Critical issues for the application of integrated MEMS/CMOS technologies to inertial measurement units

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, J.H.; Ellis, J.R.; Montague, S.

1997-03-01

One of the principal applications of monolithically integrated micromechanical/microelectronic systems has been accelerometers for automotive applications. As integrated MEMS/CMOS technologies such as those developed by U.C. Berkeley, Analog Devices, and Sandia National Laboratories mature, additional systems for more sensitive inertial measurements will enter the commercial marketplace. In this paper, the authors will examine key technology design rules which impact the performance and cost of inertial measurement devices manufactured in integrated MEMS/CMOS technologies. These design parameters include: (1) minimum MEMS feature size, (2) minimum CMOS feature size, (3) maximum MEMS linear dimension, (4) number of mechanical MEMS layers, (5) MEMS/CMOS spacing.more » In particular, the embedded approach to integration developed at Sandia will be examined in the context of these technology features. Presently, this technology offers MEMS feature sizes as small as 1 {micro}m, CMOS critical dimensions of 1.25 {micro}m, MEMS linear dimensions of 1,000 {micro}m, a single mechanical level of polysilicon, and a 100 {micro}m space between MEMS and CMOS. This is applicable to modern precision guided munitions.« less

Partnering for Learnware: Critical Success Factors in the Use of Learnware by Human Resources Sector Councils and Industry Associations in Canada = Partenariats pour les technologies d'apprentissage: Facteurs critiques de succes dans l'utilisation des technologies d'apprentissage par les conseils sectoriels des ressources humaines et les associations industrielles au Canada.

ERIC Educational Resources Information Center

Stahmer, Anna; Green, Lyndsay

The use of learnware by human resources sector councils and industry associations in Canada was examined to identify critical success factors in the use of technology-based training. Eight case studies--four involving sector councils and four involving industry associations that either have national mandates or distribute their products across…

An Exercise in Technology Prioritization in a Competitive Environment

NASA Technical Reports Server (NTRS)

Stephens, Karen L.

2006-01-01

The proper prioritization of technologies within a technology development program is critical for success in a budget constrained environment. A large portfolio of diverse products at differing states of development all competing for program resources presents a need for a process by which a realistic need date can guide the development strategy for each technology. This paper will document an exercise to identify "mission pull" for each technology that can be used to identify the best projected need date for each. This date is then used to back out a development schedule with corresponding funding profile needed to meet the flight opportunity.

Future Critical Issues and Problems Facing Technology and Engineering Education in the Commonwealth of Virginia

ERIC Educational Resources Information Center

Katsioloudis, Petros; Moye, Johnny J.

2012-01-01

The purpose of this research was to determine the future critical issues and problems facing the K-12 technology and engineering education profession in the Commonwealth of Virginia. This study was based on the Wicklein nationwide studies (1993a, 2005). Even though this study did not exactly replicate the Wicklein studies--since it was limited to…

Young drivers' engagement with social interactive technology on their smartphone: Critical beliefs to target in public education messages.

PubMed

Gauld, Cassandra S; Lewis, Ioni M; White, Katherine M; Watson, Barry

2016-11-01

The current study forms part of a larger study based on the Step Approach to Message Design and Testing (SatMDT), a new and innovative framework designed to guide the development and evaluation of health communication messages, including road safety messages. This four step framework is based on several theories, including the Theory of Planned Behaviour. The current study followed steps one and two of the SatMDT framework and utilised a quantitative survey to validate salient beliefs (behavioural, normative, and control) about initiating, monitoring/reading, and responding to social interactive technology on smartphones by N=114 (88F, 26M) young drivers aged 17-25 years. These beliefs had been elicited in a prior in-depth qualitative study. A subsequent critical beliefs analysis identified seven beliefs as potential targets for public education messages, including, 'slow-moving traffic' (control belief - facilitator) for both monitoring/reading and responding behaviours; 'feeling at ease that you had received an expected communication' (behavioural belief -advantage) for monitoring/reading behaviour; and 'friends/peers more likely to approve' (normative belief) for responding behaviour. Potential message content targeting these seven critical beliefs is discussed in accordance with the SatMDT. Copyright © 2016 Elsevier Ltd. All rights reserved.

A systematic analysis of the PARP protein family identifies new functions critical for cell physiology

PubMed Central

Vyas, Sejal; Chesarone-Cataldo, Melissa; Todorova, Tanya; Huang, Yun-Han; Chang, Paul

2013-01-01

The poly(ADP-ribose) polymerase (PARP) family of proteins use NAD+ as their substrate to modify acceptor proteins with adenosine diphosphate-ribose (ADPr) modifications. The function of most PARPs under physiological conditions is unknown. Here, to better understand this protein family, we systematically analyze the cell cycle localization of each PARP and of poly(ADP-ribose), a product of PARP activity, then identify the knock-down phenotype of each protein and perform secondary assays to elucidate function. We show that most PARPs are cytoplasmic, identify cell cycle differences in the ratio of nuclear to cytoplasmic poly(ADP-ribose), and identify four phenotypic classes of PARP function. These include the regulation of membrane structures, cell viability, cell division, and the actin cytoskeleton. Further analysis of PARP14 shows that it is a component of focal adhesion complexes required for proper cell motility and focal adhesion function. In total, we show that PARP proteins are critical regulators of eukaryotic physiology. PMID:23917125

Critical technology experiment results for lightweight space heat receiver

NASA Technical Reports Server (NTRS)

Schneider, Michael G.; Brege, Mark A.; Heidenreich, Gary R.

1991-01-01

Critical technology experiments have been performed on thermal energy storage modules in support of the NASA Advanced Solar Dynamic Brayton Heat Receiver Program. The modules, wedge-shaped canisters containing lithium fluoride (LiF), were designed to minimize the mechanical stresses that occur during the phase change of the LiF. Nickel foam inserts were placed in two of the test canisters to provide thermal conductivity enhancement and to distribute the void volume throughout the canister. A procedure was developed for reducing the nickel oxides on the nickel foam to enhance the wicking ability of the foam. The canisters were filled with LiF and closure-welded at the NASA Lewis Research Center. Two canisters, one with a nickel foam insert, the other without an insert, were thermally cycled in various orientations in a fluidized bed furnace. Computer-aided tomography was successfully used to nondestructively determine void locations in the canisters. Finally, canister dimensional stability was measured after thermal cycling with an inspection fixture.

Life support decision making in critical care: Identifying and appraising the qualitative research evidence.

PubMed

Giacomini, Mita; Cook, Deborah; DeJean, Deirdre

2009-04-01

The objective of this study is to identify and appraise qualitative research evidence on the experience of making life-support decisions in critical care. In six databases and supplementary sources, we sought original research published from January 1990 through June 2008 reporting qualitative empirical studies of the experience of life-support decision making in critical care settings. Fifty-three journal articles and monographs were included. Of these, 25 reported prospective studies and 28 reported retrospective studies. We abstracted methodologic characteristics relevant to the basic critical appraisal of qualitative research (prospective data collection, ethics approval, purposive sampling, iterative data collection and analysis, and any method to corroborate findings). Qualitative research traditions represented include grounded theory (n = 15, 28%), ethnography or naturalistic methods (n = 15, 28%), phenomenology (n = 9, 17%), and other or unspecified approaches (n = 14, 26%). All 53 documents describe the research setting; 97% indicate purposive sampling of participants. Studies vary in their capture of multidisciplinary clinician and family perspectives. Thirty-one (58%) report research ethics board review. Only 49% report iterative data collection and analysis, and eight documents (15%) describe an analytically driven stopping point for data collection. Thirty-two documents (60%) indicated a method for corroborating findings. Qualitative evidence often appears outside of clinical journals, with most research from the United States. Prospective, observation-based studies follow life-support decision making directly. These involve a variety of participants and yield important insights into interactions, communication, and dynamics. Retrospective, interview-based studies lack this direct engagement, but focus on the recollections of fewer types of participants (particularly patients and physicians), and typically address specific issues (communication and

A proposed procedure for expressing the behavior of a full engine cycle by identifying its critical load timings

NASA Astrophysics Data System (ADS)

Marius Andrei, Mihalache; Gheorghe, Nagit; Gavril, Musca; Vasile, Merticaru, Jr.; Marius Ionut, Ripanu

2016-11-01

In the present study the authors propose a new algorithm for identifying the right loads that act upon a functional connecting rod during a full engine cycle. The loads are then divided into three categories depending on the results they produce, as static, semi-dynamic and dynamic ones Because an engine cycle extends up to 720°, the authors aim to identify a method of substitution of values that produce the same effect as a previous value of a considered angle did. In other words, the proposed method aims to pin point the critical values that produce an effect different as the one seen before during a full engine cycle. Only those values will then be considered as valid loads that act upon the connecting rod inside FEA analyses. This technique has been applied to each of the three categories mentioned above and did produced different critical values for each one of them. The whole study relies on a theoretical mechanical project which was developed in order to identify the right values that correspond to each degree of the entire engine cycle of a Daewoo Tico automobile.

Computer-Aided Argument Mapping in an EFL Setting: Does Technology Precede Traditional Paper and Pencil Approach in Developing Critical Thinking?

ERIC Educational Resources Information Center

Eftekhari, Maryam; Sotoudehnama, Elaheh; Marandi, S. Susan

2016-01-01

Developing higher-order critical thinking skills as one of the central objectives of education has been recently facilitated via software packages. Whereas one such technology as computer-aided argument mapping is reported to enhance levels of critical thinking (van Gelder 2001), its application as a pedagogical tool in English as a Foreign…

Identifying critical factors influencing the disposal of dead pigs by farmers in China.

PubMed

Wu, Linhai; Xu, Guoyan; Wang, Xiaoli

2016-01-01

Disposal of dead pigs by pig farmers may have a direct impact on pork safety, public health, and the ecological environment in China. Drawing on the existing literature, this study analyzed and summarized the main factors that could affect the disposal of dead pigs by pig farmers by conducting a survey of 654 pig farmers in Funing County, Jiangsu Province, China. The purpose of this analysis was to investigate the disposal of dead pigs in China and provide useful regulatory strategies for the government. The interrelationships among dimensions and factors that affect the disposal of dead pigs by farmers were analyzed, and critical factors were identified by a hybrid multi-criteria decision-making method, which is a combination of decision-making trial and evaluation laboratory (DEMATEL) and analytic network process (ANP). Our results demonstrated that production characteristics were the most important dimensions and that costs and profits, scale of farming, pattern of farming, knowledge of relevant laws and regulations, and knowledge of pig disease and prevention were the five most critical factors affecting the disposal of dead pigs by farmers in China at this stage. The significance of this study lies in further discussing some management policies for the Chinese government regarding strengthen regulation of disposing dead pigs.

Identifying the critical success factors in the coverage of low vision services using the classification analysis and regression tree methodology.

PubMed

Chiang, Peggy Pei-Chia; Xie, Jing; Keeffe, Jill Elizabeth

2011-04-25

To identify the critical success factors (CSF) associated with coverage of low vision services. Data were collected from a survey distributed to Vision 2020 contacts, government, and non-government organizations (NGOs) in 195 countries. The Classification and Regression Tree Analysis (CART) was used to identify the critical success factors of low vision service coverage. Independent variables were sourced from the survey: policies, epidemiology, provision of services, equipment and infrastructure, barriers to services, human resources, and monitoring and evaluation. Socioeconomic and demographic independent variables: health expenditure, population statistics, development status, and human resources in general, were sourced from the World Health Organization (WHO), World Bank, and the United Nations (UN). The findings identified that having >50% of children obtaining devices when prescribed (χ(2) = 44; P < 0.000), multidisciplinary care (χ(2) = 14.54; P = 0.002), >3 rehabilitation workers per 10 million of population (χ(2) = 4.50; P = 0.034), higher percentage of population urbanized (χ(2) = 14.54; P = 0.002), a level of private investment (χ(2) = 14.55; P = 0.015), and being fully funded by government (χ(2) = 6.02; P = 0.014), are critical success factors associated with coverage of low vision services. This study identified the most important predictors for countries with better low vision coverage. The CART is a useful and suitable methodology in survey research and is a novel way to simplify a complex global public health issue in eye care.

Identifying the science and technology dimensions of emerging public policy issues through horizon scanning.

PubMed

Parker, Miles; Acland, Andrew; Armstrong, Harry J; Bellingham, Jim R; Bland, Jessica; Bodmer, Helen C; Burall, Simon; Castell, Sarah; Chilvers, Jason; Cleevely, David D; Cope, David; Costanzo, Lucia; Dolan, James A; Doubleday, Robert; Feng, Wai Yi; Godfray, H Charles J; Good, David A; Grant, Jonathan; Green, Nick; Groen, Arnoud J; Guilliams, Tim T; Gupta, Sunjai; Hall, Amanda C; Heathfield, Adam; Hotopp, Ulrike; Kass, Gary; Leeder, Tim; Lickorish, Fiona A; Lueshi, Leila M; Magee, Chris; Mata, Tiago; McBride, Tony; McCarthy, Natasha; Mercer, Alan; Neilson, Ross; Ouchikh, Jackie; Oughton, Edward J; Oxenham, David; Pallett, Helen; Palmer, James; Patmore, Jeff; Petts, Judith; Pinkerton, Jan; Ploszek, Richard; Pratt, Alan; Rocks, Sophie A; Stansfield, Neil; Surkovic, Elizabeth; Tyler, Christopher P; Watkinson, Andrew R; Wentworth, Jonny; Willis, Rebecca; Wollner, Patrick K A; Worts, Kim; Sutherland, William J

2014-01-01

Public policy requires public support, which in turn implies a need to enable the public not just to understand policy but also to be engaged in its development. Where complex science and technology issues are involved in policy making, this takes time, so it is important to identify emerging issues of this type and prepare engagement plans. In our horizon scanning exercise, we used a modified Delphi technique. A wide group of people with interests in the science and policy interface (drawn from policy makers, policy adviser, practitioners, the private sector and academics) elicited a long list of emergent policy issues in which science and technology would feature strongly and which would also necessitate public engagement as policies are developed. This was then refined to a short list of top priorities for policy makers. Thirty issues were identified within broad areas of business and technology; energy and environment; government, politics and education; health, healthcare, population and aging; information, communication, infrastructure and transport; and public safety and national security.

Identifying the Science and Technology Dimensions of Emerging Public Policy Issues through Horizon Scanning

PubMed Central

Parker, Miles; Acland, Andrew; Armstrong, Harry J.; Bellingham, Jim R.; Bland, Jessica; Bodmer, Helen C.; Burall, Simon; Castell, Sarah; Chilvers, Jason; Cleevely, David D.; Cope, David; Costanzo, Lucia; Dolan, James A.; Doubleday, Robert; Feng, Wai Yi; Godfray, H. Charles J.; Good, David A.; Grant, Jonathan; Green, Nick; Groen, Arnoud J.; Guilliams, Tim T.; Gupta, Sunjai; Hall, Amanda C.; Heathfield, Adam; Hotopp, Ulrike; Kass, Gary; Leeder, Tim; Lickorish, Fiona A.; Lueshi, Leila M.; Magee, Chris; Mata, Tiago; McBride, Tony; McCarthy, Natasha; Mercer, Alan; Neilson, Ross; Ouchikh, Jackie; Oughton, Edward J.; Oxenham, David; Pallett, Helen; Palmer, James; Patmore, Jeff; Petts, Judith; Pinkerton, Jan; Ploszek, Richard; Pratt, Alan; Rocks, Sophie A.; Stansfield, Neil; Surkovic, Elizabeth; Tyler, Christopher P.; Watkinson, Andrew R.; Wentworth, Jonny; Willis, Rebecca; Wollner, Patrick K. A.; Worts, Kim; Sutherland, William J.

2014-01-01

Public policy requires public support, which in turn implies a need to enable the public not just to understand policy but also to be engaged in its development. Where complex science and technology issues are involved in policy making, this takes time, so it is important to identify emerging issues of this type and prepare engagement plans. In our horizon scanning exercise, we used a modified Delphi technique [1]. A wide group of people with interests in the science and policy interface (drawn from policy makers, policy adviser, practitioners, the private sector and academics) elicited a long list of emergent policy issues in which science and technology would feature strongly and which would also necessitate public engagement as policies are developed. This was then refined to a short list of top priorities for policy makers. Thirty issues were identified within broad areas of business and technology; energy and environment; government, politics and education; health, healthcare, population and aging; information, communication, infrastructure and transport; and public safety and national security. PMID:24879444

Using technology to prevent adverse drug events in the intensive care unit.

PubMed

Hassan, Erkan; Badawi, Omar; Weber, Robert J; Cohen, Henry

2010-06-01

Critically ill patients are particularly susceptible to adverse drug events (ADEs) due to their rapidly changing and unstable physiology, complex therapeutic regimens, and large percentage of medications administered intravenously. There are a wide variety of technologies that can help prevent the points of failure commonly associated with ADEs (i.e., the five "Rights": right patient; right drug; right route; right dose; right frequency). These technologies are often categorized by their degree of complexity to design and engineer and the type of error they are designed to prevent. Focusing solely on the software and hardware design of technology may over- or underestimate the degree of difficulty to avoid ADEs at the bedside. Alternatively, we propose categorizing technological solutions by identifying the factors essential for success. The two major critical success factors are: 1) the degree of clinical assessment required by the clinician to appropriately evaluate and disposition the issue identified by a technology; and 2) the complexity associated with effective implementation. This classification provides a way of determining how ADE-preventing technologies in the intensive care unit can be successfully integrated into clinical practice. Although there are limited data on the effectiveness of many technologies in reducing ADEs, we will review the technologies currently available in the intensive care unit environment. We will also discuss critical success factors for implementation, common errors made during implementation, and the potential errors using these systems.

Criticality of Low-Energy Protons in Single-Event Effects Testing of Highly-Scaled Technologies

NASA Technical Reports Server (NTRS)

Pellish, Jonathan A.; Marshall, Paul W.; Rodbell, Kenneth P.; Gordon, Michael S.; LaBel, Kenneth A.; Schwank, James R.; Dodds, Nathaniel A.; Castaneda, Carlos M.; Berg, Melanie D.; Kim, Hak S.;

Innovative Technologies for Global Space Exploration

NASA Technical Reports Server (NTRS)

Hay, Jason; Gresham, Elaine; Mullins, Carie; Graham, Rachael; Williams-Byrd; Reeves, John D.

2012-01-01

Under the direction of NASA's Exploration Systems Mission Directorate (ESMD), Directorate Integration Office (DIO), The Tauri Group with NASA's Technology Assessment and Integration Team (TAIT) completed several studies and white papers that identify novel technologies for human exploration. These studies provide technical inputs to space exploration roadmaps, identify potential organizations for exploration partnerships, and detail crosscutting technologies that may meet some of NASA's critical needs. These studies are supported by a relational database of more than 400 externally funded technologies relevant to current exploration challenges. The identified technologies can be integrated into existing and developing roadmaps to leverage external resources, thereby reducing the cost of space exploration. This approach to identifying potential spin-in technologies and partnerships could apply to other national space programs, as well as international and multi-government activities. This paper highlights innovative technologies and potential partnerships from economic sectors that historically are less connected to space exploration. It includes breakthrough concepts that could have a significant impact on space exploration and discusses the role of breakthrough concepts in technology planning. Technologies and partnerships are from NASA's Technology Horizons and Technology Frontiers game-changing and breakthrough technology reports as well as the External Government Technology Dataset, briefly described in the paper. The paper highlights example novel technologies that could be spun-in from government and commercial sources, including virtual worlds, synthetic biology, and human augmentation. It will consider how these technologies can impact space exploration and will discuss ongoing activities for planning and preparing them.

Managing critical materials with a technology-specific stocks and flows model.

PubMed

Busch, Jonathan; Steinberger, Julia K; Dawson, David A; Purnell, Phil; Roelich, Katy

2014-01-21

The transition to low carbon infrastructure systems required to meet climate change mitigation targets will involve an unprecedented roll-out of technologies reliant upon materials not previously widespread in infrastructure. Many of these materials (including lithium and rare earth metals) are at risk of supply disruption. To ensure the future sustainability and resilience of infrastructure, circular economy policies must be crafted to manage these critical materials effectively. These policies can only be effective if supported by an understanding of the material demands of infrastructure transition and what reuse and recycling options are possible given the future availability of end-of-life stocks. This Article presents a novel, enhanced stocks and flows model for the dynamic assessment of material demands resulting from infrastructure transitions. By including a hierarchical, nested description of infrastructure technologies, their components, and the materials they contain, this model can be used to quantify the effectiveness of recovery at both a technology remanufacturing and reuse level and a material recycling level. The model's potential is demonstrated on a case study on the roll-out of electric vehicles in the UK forecast by UK Department of Energy and Climate Change scenarios. The results suggest policy action should be taken to ensure Li-ion battery recycling infrastructure is in place by 2025 and NdFeB motor magnets should be designed for reuse. This could result in a reduction in primary demand for lithium of 40% and neodymium of 70%.

Managing Critical Materials with a Technology-Specific Stocks and Flows Model

PubMed Central

2013-01-01

The transition to low carbon infrastructure systems required to meet climate change mitigation targets will involve an unprecedented roll-out of technologies reliant upon materials not previously widespread in infrastructure. Many of these materials (including lithium and rare earth metals) are at risk of supply disruption. To ensure the future sustainability and resilience of infrastructure, circular economy policies must be crafted to manage these critical materials effectively. These policies can only be effective if supported by an understanding of the material demands of infrastructure transition and what reuse and recycling options are possible given the future availability of end-of-life stocks. This Article presents a novel, enhanced stocks and flows model for the dynamic assessment of material demands resulting from infrastructure transitions. By including a hierarchical, nested description of infrastructure technologies, their components, and the materials they contain, this model can be used to quantify the effectiveness of recovery at both a technology remanufacturing and reuse level and a material recycling level. The model’s potential is demonstrated on a case study on the roll-out of electric vehicles in the UK forecast by UK Department of Energy and Climate Change scenarios. The results suggest policy action should be taken to ensure Li-ion battery recycling infrastructure is in place by 2025 and NdFeB motor magnets should be designed for reuse. This could result in a reduction in primary demand for lithium of 40% and neodymium of 70%. PMID:24328245

Technology utilization to prevent medication errors.

PubMed

Forni, Allison; Chu, Hanh T; Fanikos, John

2010-01-01

Medication errors have been increasingly recognized as a major cause of iatrogenic illness and system-wide improvements have been the focus of prevention efforts. Critically ill patients are particularly vulnerable to injury resulting from medication errors because of the severity of illness, need for high risk medications with a narrow therapeutic index and frequent use of intravenous infusions. Health information technology has been identified as method to reduce medication errors as well as improve the efficiency and quality of care; however, few studies regarding the impact of health information technology have focused on patients in the intensive care unit. Computerized physician order entry and clinical decision support systems can play a crucial role in decreasing errors in the ordering stage of the medication use process through improving the completeness and legibility of orders, alerting physicians to medication allergies and drug interactions and providing a means for standardization of practice. Electronic surveillance, reminders and alerts identify patients susceptible to an adverse event, communicate critical changes in a patient's condition, and facilitate timely and appropriate treatment. Bar code technology, intravenous infusion safety systems, and electronic medication administration records can target prevention of errors in medication dispensing and administration where other technologies would not be able to intercept a preventable adverse event. Systems integration and compliance are vital components in the implementation of health information technology and achievement of a safe medication use process.

Variable Cycle Engine Technology Program Planning and Definition Study

NASA Technical Reports Server (NTRS)

Westmoreland, J. S.; Stern, A. M.

1978-01-01

The variable stream control engine, VSCE-502B, was selected as the base engine, with the inverted flow engine concept selected as a backup. Critical component technologies were identified, and technology programs were formulated. Several engine configurations were defined on a preliminary basis to serve as demonstration vehicles for the various technologies. The different configurations present compromises in cost, technical risk, and technology return. Plans for possible variably cycle engine technology programs were formulated by synthesizing the technology requirements with the different demonstrator configurations.

HTA and its legal issues: a framework for identifying legal issues in health technology assessment.

PubMed

Widrig, Daniel; Tag, Brigitte

2014-12-01

Legal analysis can highlight important issues that are relevant when deciding whether a medical technology should be implemented or reimbursed. Literature and studies show that even though the law is an acknowledged part of health technology assessment (HTA), legal issues are rarely considered in practice. One reason for this may be the lack of knowledge about the diversity of legal issues that are relevant for HTA. Therefore, this contribution aims primarily to identify and then explain the relevant legal issues in HTA. This study offers a framework for identifying the legal issues in HTAs in different jurisdictions and provides a basis for further research. After extensive literature search, the authors review Swiss health law to identify legal issues that are relevant to HTA. The authors then categorize these legal issues using a framework with an inside and outside perspective. Finally, they explain a selection of these legal issues with several examples. This study reveals numerous legal issues that are relevant for HTA and underlines the necessity of incorporating legal analysis in HTAs. The suggested perspectival framework in this study provides a basis to structure the legal analysis. The identified legal issues are relevant in other countries and the perspectival framework is transferable to other jurisdictions. The article underlines the importance of in-depth discussion about the role of law in HTA. It provides a structured overview of the legal issues in HTA and suggests a development of more concrete instruments toward a standardized legal technology assessment.

Project plan hydrogen energy systems technology. Phase 1: Hydrogen energy systems technology study

NASA Technical Reports Server (NTRS)

1974-01-01

An overview of the potential need for hydrogen as a source of energy in the future was presented in order to identify and define the technology requirements for the most promising approaches to meet that need. The following study objectives were discussed: (1) determination of the future demand for hydrogen, based on current trends and anticipated new uses, (2) identification of the critical research and technology advances required to meet this need considering, to the extent possible, raw material limitations, economics, and environmental effects, and (3) definition and recommendation of the scope and space of a National Hydrogen Energy Systems Technology Program and outline of a Program Development Plan.

Identifying critical success factors (CSFs) of implementing building information modeling (BIM) in Malaysian construction industry

NASA Astrophysics Data System (ADS)

Yaakob, Mazri; Ali, Wan Nur Athirah Wan; Radzuan, Kamaruddin

2016-08-01

Building Information Modeling (BIM) is defined as existing from the earliest concept to demolition and it involves creating and using an intelligent 3D model to inform and communicate project decisions. This research aims to identify the critical success factors (CSFs) of BIM implementation in Malaysian construction industry. A literature review was done to explore previous BIM studies on definitions and history of BIM, construction issues, application of BIM in construction projects as well as benefits of BIM. A series of interviews with multidisciplinary Malaysian construction experts will be conducted purposely for data collection process guided by the research design and methodology approach of this study. The analysis of qualitative data from the process will be combined with criteria identified in the literature review in order to identify the CSFs. Finally, the CSFs of BIM implementation will be validated by further Malaysian industrialists during a workshop. The validated CSFs can be used as a term of reference for both Malaysian practitioners and academics towards measuring BIM effectiveness level in their organizations.

Addressing Learning Style Criticism: The Unified Learning Style Model Revisited

NASA Astrophysics Data System (ADS)

Popescu, Elvira

Learning style is one of the individual differences that play an important but controversial role in the learning process. This paper aims at providing a critical analysis regarding learning styles and their use in technology enhanced learning. The identified criticism issues are addressed by reappraising the so called Unified Learning Style Model (ULSM). A detailed description of the ULSM components is provided, together with their rationale. The practical applicability of the model in adaptive web-based educational systems and its advantages versus traditional learning style models are also outlined.

Using Active Learning to Identify Health Information Technology Related Patient Safety Events.

PubMed

Fong, Allan; Howe, Jessica L; Adams, Katharine T; Ratwani, Raj M

2017-01-18

The widespread adoption of health information technology (HIT) has led to new patient safety hazards that are often difficult to identify. Patient safety event reports, which are self-reported descriptions of safety hazards, provide one view of potential HIT-related safety events. However, identifying HIT-related reports can be challenging as they are often categorized under other more predominate clinical categories. This challenge of identifying HIT-related reports is exacerbated by the increasing number and complexity of reports which pose challenges to human annotators that must manually review reports. In this paper, we apply active learning techniques to support classification of patient safety event reports as HIT-related. We evaluated different strategies and demonstrated a 30% increase in average precision of a confirmatory sampling strategy over a baseline no active learning approach after 10 learning iterations.

Postsecondary Instructor Attitudes toward Tablet Use for Collaboration and Critical Thinking Development

ERIC Educational Resources Information Center

Hubbard, Jerry D.

2017-01-01

Although research has identified critical thinking (CT) as an objective of higher education, limited quantitative research has focused on how postsecondary instructors view using handheld devices for classroom collaboration to support CT. There are studies examining how the use of tablet technologies influence collaborative learning (CL), showing…

Quantitative Analysis of Technological Innovation in Knee Arthroplasty: Using Patent and Publication Metrics to Identify Developments and Trends.

PubMed

Dalton, David M; Burke, Thomas P; Kelly, Enda G; Curtin, Paul D

2016-06-01

Surgery is in a constant continuum of innovation with refinement of technique and instrumentation. Arthroplasty surgery potentially represents an area with highly innovative process. This study highlights key area of innovation in knee arthroplasty over the past 35 years using patent and publication metrics. Growth rates and patterns are analyzed. Patents are correlated to publications as a measure of scientific support. Electronic patent and publication databases were searched over the interval 1980-2014 for "knee arthroplasty" OR "knee replacement." The resulting patent codes were allocated into technology clusters. Citation analysis was performed to identify any important developments missed on initial analysis. The technology clusters identified were further analyzed, individual repeat searches performed, and growth curves plotted. The initial search revealed 3574 patents and 16,552 publications. The largest technology clusters identified were Unicompartmental, Patient-Specific Instrumentation (PSI), Navigation, and Robotic knee arthroplasties. The growth in patent activity correlated strongly with publication activity (Pearson correlation value 0.892, P < .01), but was growing at a faster rate suggesting a decline in vigilance. PSI, objectively the fastest growing technology in the last 5 years, is currently in a period of exponential growth that began a decade ago. Established technologies in the study have double s-shaped patent curves. Identifying trends in emerging technologies is possible using patent metrics and is useful information for training and regulatory bodies. The decline in ratio of publications to patents and the uninterrupted growth of PSI are developments that may warrant further investigation. Copyright © 2015 Elsevier Inc. All rights reserved.

DEVELOPMENT OF PROTOCOLS TO STUDY TO IDENTIFY CRITICAL ECOSYSTEMS

EPA Science Inventory

Healthy, functioning ecosystems are critical to the sustainability of human and natural communities, but the identification of areas of healthy ecosystems in an area as large as Region 5 is difficult due to time and information constraints. Geographic Information Systems (GIS) a...

Betweenness-Based Method to Identify Critical Transmission Sectors for Supply Chain Environmental Pressure Mitigation.

PubMed

Liang, Sai; Qu, Shen; Xu, Ming

2016-02-02

To develop industry-specific policies for mitigating environmental pressures, previous studies primarily focus on identifying sectors that directly generate large amounts of environmental pressures (a.k.a. production-based method) or indirectly drive large amounts of environmental pressures through supply chains (e.g., consumption-based method). In addition to those sectors as important environmental pressure producers or drivers, there exist sectors that are also important to environmental pressure mitigation as transmission centers. Economy-wide environmental pressure mitigation might be achieved by improving production efficiency of these key transmission sectors, that is, using less upstream inputs to produce unitary output. We develop a betweenness-based method to measure the importance of transmission sectors, borrowing the betweenness concept from network analysis. We quantify the betweenness of sectors by examining supply chain paths extracted from structural path analysis that pass through a particular sector. We take China as an example and find that those critical transmission sectors identified by betweenness-based method are not always identifiable by existing methods. This indicates that betweenness-based method can provide additional insights that cannot be obtained with existing methods on the roles individual sectors play in generating economy-wide environmental pressures. Betweenness-based method proposed here can therefore complement existing methods for guiding sector-level environmental pressure mitigation strategies.

Converging Technology, Pedagogy, and Critical Thinking

ERIC Educational Resources Information Center

Moeller, Aleidine J.; Van Alstine, Megan

2011-01-01

The theme of children and technology has been a prevailing topic of conversation among parents, teachers and researchers, stirring debate in all sectors of society. What is gained and what is lost by these "digital natives" born into an age of globalization, social connections, instant communication and gratification? How can technology be…

Critical Connections: Technology Use that Empowers

ERIC Educational Resources Information Center

O'Hara, Kate E.

2010-01-01

This research employs the use of narrative and auto-ethnography in an examination of the complex relationships that arise when students and teachers use technology as an instructional tool. The story unfolds in an exploration of the significant impact and implications the use of computers and related technologies have on educational and societal…

New measurement technology for 'Critical Dynamics in Microgravity'

NASA Astrophysics Data System (ADS)

Duncan, Robert

2000-03-01

When driven away from equilibrium by a heat flux Q, the superfluid transition in ^4He evolves from a simple critical point into a fascinating and complex nonlinear region, where the onset of macroscopic quantum order is masked by Earth's gravity. Prior measurements of heat transport within this nonlinear region on Earth (and scheduled measurements on the International Space Station) require temperature resolution to 0.1 nK at 2.2 K in an exceptionally stable thermometer, with all heat flow stable to 3 fW/s. These measurements of the liquid helium temperature must be localized along the side of the experimental cell with a spatial resolution of 5 microns, and systematic offsets of the measured temperature from the true helium temperature must be controlled to within 0.3 nK. Such measurement technology has recently been developed, out-performing these demanding requirements by a comfortable margin. A new class of fundamental physics experiments may be facilitated by these recent advances in metrology. This work has been supported by the Microgravity Science Division of NASA, conducted in cooperation with JPL, and in collaboration with Mary Jayne Adriaans, Alex Babkin, S.T.P. Boyd, Peter Day, David Elliott, Beverly Klemme, T.D. McCarson, Ray Nelson, and Dmitri Sergatskov.

Global mining risk footprint of critical metals necessary for low-carbon technologies: the case of neodymium, cobalt, and platinum in Japan.

PubMed

Nansai, Keisuke; Nakajima, Kenichi; Kagawa, Shigemi; Kondo, Yasushi; Shigetomi, Yosuke; Suh, Sangwon

2015-02-17

Meeting the 2-degree global warming target requires wide adoption of low-carbon energy technologies. Many such technologies rely on the use of precious metals, however, increasing the dependence of national economies on these resources. Among such metals, those with supply security concerns are referred to as critical metals. Using the Policy Potential Index developed by the Fraser Institute, this study developed a new footprint indicator, the mining risk footprint (MRF), to quantify the mining risk directly and indirectly affecting a national economy through its consumption of critical metals. We formulated the MRF as a product of the material footprint (MF) of the consuming country and the mining risks of the countries where the materials are mined. A case study was conducted for the 2005 Japanese economy to determine the MF and MRF for three critical metals essential for emerging energy technologies: neodymium, cobalt and platinum. The results indicate that in 2005 the MFs generated by Japanese domestic final demand, that is, the consumption-based metal output of Japan, were 1.0 × 10(3) t for neodymium, 9.4 × 10(3) t for cobalt, and 2.1 × 10 t for platinum. Export demand contributes most to the MF, accounting for 3.0 × 10(3) t, 1.3 × 10(5) t, and 3.1 × 10 t, respectively. The MRFs of Japanese total final demand (domestic plus export) were calculated to be 1.7 × 10 points for neodymium, 4.5 × 10(-2) points for cobalt, and 5.6 points for platinum, implying that the Japanese economy is incurring a high mining risk through its use of neodymium. This country's MRFs are all dominated by export demand. The paper concludes by discussing the policy implications and future research directions for measuring the MFs and MRFs of critical metals. For countries poorly endowed with mineral resources, adopting low-carbon energy technologies may imply a shifting of risk from carbon resources to other natural resources, in particular critical metals, and a trade

Baccalaureate Nursing Students' Abilities in Critically Identifying and Evaluating the Quality of Online Health Information.

PubMed

Theron, Maggie; Redmond, Anne; Borycki, Elizabeth M

2017-01-01

Both the Internet and social media have become important tools that patients and health professionals, including health professional students, use to obtain information and support their decision-making surrounding health care. Students in the health sciences require increased competence to select, appraise, and use online sources to adequately educate and support patients and advocate for patient needs and best practices. The purpose of this study was to ascertain if second year nursing students have the ability to critically identify and evaluate the quality of online health information through comparisons between student and expert assessments of selected online health information postings using an adapted Trust in Online Health Information scale. Interviews with experts provided understanding of how experts applied the selected criteria and what experts recommend for implementing nursing informatics literacy in curriculums. The difference between student and expert assessments of the quality of the online information is on average close to 40%. Themes from the interviews highlighted several possible factors that may influence informatics competency levels in students, specifically regarding the critical appraisal of the quality of online health information.

Stakeholder Engagement to Identify Priorities for Improving the Quality and Value of Critical Care.

PubMed

Stelfox, Henry T; Niven, Daniel J; Clement, Fiona M; Bagshaw, Sean M; Cook, Deborah J; McKenzie, Emily; Potestio, Melissa L; Doig, Christopher J; O'Neill, Barbara; Zygun, David

2015-01-01

Large amounts of scientific evidence are generated, but not implemented into patient care (the 'knowledge-to-care' gap). We identified and prioritized knowledge-to-care gaps in critical care as opportunities to improve the quality and value of healthcare. We used a multi-method community-based participatory research approach to engage a Network of all adult (n = 14) and pediatric (n = 2) medical-surgical intensive care units (ICUs) in a fully integrated geographically defined healthcare system serving 4 million residents. Participants included Network oversight committee members (n = 38) and frontline providers (n = 1,790). Network committee members used a modified RAND/University of California Appropriateness Methodology, to serially propose, rate (validated 9 point scale) and revise potential knowledge-to-care gaps as priorities for improvement. The priorities were sent to frontline providers for evaluation. Results were relayed back to all frontline providers for feedback. Initially, 68 knowledge-to-care gaps were proposed, rated and revised by the committee (n = 32 participants) over 3 rounds of review and resulted in 13 proposed priorities for improvement. Then, 1,103 providers (62% response rate) evaluated the priorities, and rated 9 as 'necessary' (median score 7-9). Several factors were associated with rating priorities as necessary in multivariable logistic regression, related to the provider (experience, teaching status of ICU) and topic (strength of supporting evidence, potential to benefit the patient, potential to improve patient/family experience, potential to decrease costs). A community-based participatory research approach engaged a diverse group of stakeholders to identify 9 priorities for improving the quality and value of critical care. The approach was time and cost efficient and could serve as a model to prioritize areas for research quality improvement across other settings.

Education and Technology: Critical Perspectives, Possible Futures

ERIC Educational Resources Information Center

Kritt, David W., Ed.; Winegar, Lucien T., Ed.

2007-01-01

This book offers a truly learner-centered and learning-centered approach to educational technology. In substantial and interdisciplinary ways it carefully builds a foundation not just for rethinking the potential for technology in light of educational principles but, more importantly, rethinking teaching and learning in light of technology's…

[Technology and humanization in critical care environments].

PubMed

Marques, Isaac Rosa; Souza, Agnaldo Rodrigues de

2010-01-01

Because of the advances made with the industrial revolution through technological discoveries in machinery, professional-patient relationship has become increasingly automated, leaving the humanization in the background. The purpose of this paper was to reflect about the humanization process in intensive environments and its relation with the technology insertion. Technology contributes as an effective way to treat patients who require extreme care. However, if it is associated with humanization can achieves satisfactory results, improving the host of customer who receives the care provided by technology.

JWST Primary Mirror Technology Development

NASA Technical Reports Server (NTRS)

Stahl, H. Philip

2010-01-01

Mirror Technology was identified as a (if not the) critical capability necessary to achieve the Level 1 science goals. A never before demonstrated space telescope capability was required: 6 to 8 meter class pri mary mirror, diffraction limited at 2 micrometers and operates at temperatures below 50K. Launch vehicle constraints placed significant architectural constraints: deployed/segmented primary mirror (4.5 meter fairing diameter) 20 kg/m2 areal density (PM 1000 kg mass) Such mirror technology had never been demonstrated - and did not exist

Trophic transfer of microplastics in aquatic ecosystems: Identifying critical research needs.

PubMed

Au, Sarah Y; Lee, Cindy M; Weinstein, John E; van den Hurk, Peter; Klaine, Stephen J

2017-05-01

To evaluate the process of trophic transfer of microplastics, it is important to consider various abiotic and biotic factors involved in their ingestion, egestion, bioaccumulation, and biomagnification. Toward this end, a review of the literature on microplastics has been conducted to identify factors influencing their uptake and absorption; their residence times in organisms and bioaccumulation; the physical effects of their aggregation in gastrointestinal tracts; and their potential to act as vectors for the transfer of other contaminants. Limited field evidence from higher trophic level organisms in a variety of habitats suggests that trophic transfer of microplastics may be a common phenomenon and occurs concurrently with direct ingestion. Critical research needs include standardizing methods of field characterization of microplastics, quantifying uptake and depuration rates in organisms at different trophic levels, quantifying the influence that microplastics have on the uptake and/or depuration of environmental contaminants among different trophic levels, and investigating the potential for biomagnification of microplastic-associated chemicals. More integrated approaches involving computational modeling are required to fully assess trophic transfer of microplastics. Integr Environ Assess Manag 2017;13:505-509. © 2017 SETAC. © 2017 SETAC.

Realization of a universal patient identifier for electronic medical records through biometric technology.

PubMed

Leonard, D C; Pons, Alexander P; Asfour, Shihab S

2009-07-01

The technology exists for the migration of healthcare data from its archaic paper-based system to an electronic one, and, once in digital form, to be transported anywhere in the world in a matter of seconds. The advent of universally accessible healthcare data has benefited all participants, but one of the outstanding problems that must be addressed is how the creation of a standardized nationwide electronic healthcare record system in the United States would uniquely identify and match a composite of an individual's recorded healthcare information to an identified individual patients out of approximately 300 million people to a 1:1 match. To date, a few solutions to this problem have been proposed that are limited in their effectiveness. We propose the use of biometric technology within our fingerprint, iris, retina scan, and DNA (FIRD) framework, which is a multiphase system whose primary phase is a multilayer consisting of these four types of biometric identifiers: 1) fingerprint; 2) iris; 3) retina scan; and 4) DNA. In addition, it also consists of additional phases of integration, consolidation, and data discrepancy functions to solve the unique association of a patient to their medical data distinctively. This would allow a patient to have real-time access to all of their recorded healthcare information electronically whenever it is necessary, securely with minimal effort, greater effectiveness, and ease.

Present Challenges, Critical Needs, and Future Technological Directions for NASA's GN and C Engineering Discipline

NASA Technical Reports Server (NTRS)

Dennehy, Cornelius J.

2010-01-01

The National Aeronautics and Space Administration (NASA) is currently undergoing a substantial redirection. Notable among the changes occurring within NASA is the stated emphasis on technology development, integration, and demonstration. These new changes within the Agency should have a positive impact on the GN&C discipline given the potential for sizeable investments for technology development and in-space demonstrations of both Autonomous Rendezvous & Docking (AR&D) systems and Autonomous Precision Landing (APL) systems. In this paper the NASA Technical Fellow for Guidance, Navigation and Control (GN&C) provides a summary of the present technical challenges, critical needs, and future technological directions for NASA s GN&C engineering discipline. A brief overview of the changes occurring within NASA that are driving a renewed emphasis on technology development will be presented as background. The potential benefits of the planned GN&C technology developments will be highlighted. This paper will provide a GN&C State-of-the-Discipline assessment. The discipline s readiness to support the goals & objectives of each of the four NASA Mission Directorates is evaluated and the technical challenges and barriers currently faced by the discipline are summarized. This paper will also discuss the need for sustained investments to sufficiently mature the several classes of GN&C technologies required to implement NASA crewed exploration and robotic science missions.

A design and critical technology issues for on-orbit resupply of superfluid helium

NASA Technical Reports Server (NTRS)

Hopkins, Richard A.; Mord, Allan J.

1990-01-01

The issues of and the solutions to the critical design and technology areas of the Superfluid Helium On-Orbit Transfer (SHOOT) experiment, presently under development at the NASA Goddard Spaceflight Center, are discussed. Special attention is given to the SHOOT design requirements for the 10,000-liter superfluid He resupply tanker system, the concept details of the system, and the resupply operations and their analysis. A block diagram of the SHOOT system is included along with fluid management schematic and configuration diagrams of the system and its subsystems. A summary of the dewar performance is also presented.

Philosophy of Technology Assumptions in Educational Technology Leadership: Questioning Technological Determinism

ERIC Educational Resources Information Center

Webster, Mark David

2013-01-01

Scholars have emphasized that decisions about technology can be influenced by philosophy of technology assumptions, and have argued for research that critically questions technological determinist assumptions. Empirical studies of technology management in fields other than K-12 education provided evidence that philosophy of technology assumptions,…

CMOS technology: a critical enabler for free-form electronics-based killer applications

NASA Astrophysics Data System (ADS)

Hussain, Muhammad M.; Hussain, Aftab M.; Hanna, Amir

2016-05-01

Complementary metal oxide semiconductor (CMOS) technology offers batch manufacturability by ultra-large-scaleintegration (ULSI) of high performance electronics with a performance/cost advantage and profound reliability. However, as of today their focus has been on rigid and bulky thin film based materials. Their applications have been limited to computation, communication, display and vehicular electronics. With the upcoming surge of Internet of Everything, we have critical opportunity to expand the world of electronics by bridging between CMOS technology and free form electronics which can be used as wearable, implantable and embedded form. The asymmetry of shape and softness of surface (skins) in natural living objects including human, other species, plants make them incompatible with the presently available uniformly shaped and rigidly structured today's CMOS electronics. But if we can break this barrier then we can use the physically free form electronics for applications like plant monitoring for expansion of agricultural productivity and quality, we can find monitoring and treatment focused consumer healthcare electronics - and many more creative applications. In our view, the fundamental challenge is to engage the mass users to materialize their creative ideas. Present form of electronics are too complex to understand, to work with and to use. By deploying game changing additive manufacturing, low-cost raw materials, transfer printing along with CMOS technology, we can potentially stick high quality CMOS electronics on any existing objects and embed such electronics into any future objects that will be made. The end goal is to make them smart to augment the quality of our life. We use a particular example on implantable electronics (brain machine interface) and its integration strategy enabled by CMOS device design and technology run path.

Identifying hotspots and management of critical ecosystem services in rapidly urbanizing Yangtze River Delta Region, China.

PubMed

Cai, Wenbo; Gibbs, David; Zhang, Lang; Ferrier, Graham; Cai, Yongli

2017-04-15

Rapid urbanization has altered many ecosystems, causing a decline in many ecosystem services, generating serious ecological crisis. To cope with these challenges, we presented a comprehensive framework comprising five core steps for identifying and managing hotspots of critical ecosystem services in a rapid urbanizing region. This framework was applied in the case study of the Yangtze River Delta (YRD) Region. The study showed that there was large spatial heterogeneity in the hotspots of ecosystem services in the region, hotspots of supporting services and regulating services aggregately distributing in the southwest mountainous areas while hotspots of provisioning services mainly in the northeast plain, and hotspots of cultural services widespread in the waterbodies and southwest mountainous areas. The regionalization of the critical ecosystem services was made through the hotspot analysis. This study provided valuable information for environmental planning and management in a rapid urbanizing region and helped improve China's ecological redlines policy at regional scale. Copyright © 2017 Elsevier Ltd. All rights reserved.

Identifying Areas of Tension in the Field of Technology-Enhanced Learning: Results of an International Delphi Study

ERIC Educational Resources Information Center

Plesch, Christine; Kaendler, Celia; Rummel, Nikol; Wiedmann, Michael; Spada, Hans

2013-01-01

Despite steady progress in research in technology-enhanced learning (TEL), the translation of research findings and technology into educational practices falls short of expectations. We present five Areas of Tension which were identified and evaluated in an international Delphi study on TEL. These tensions might impede a more comprehensive…

Critical thinking traits of top-tier experts and implications for computer science education

NASA Astrophysics Data System (ADS)

Bushey, Dean E.

A documented shortage of technical leadership and top-tier performers in computer science jeopardizes the technological edge, security, and economic well-being of the nation. The 2005 President's Information and Technology Advisory Committee (PITAC) Report on competitiveness in computational sciences highlights the major impact of science, technology, and innovation in keeping America competitive in the global marketplace. It stresses the fact that the supply of science, technology, and engineering experts is at the core of America's technological edge, national competitiveness and security. However, recent data shows that both undergraduate and postgraduate production of computer scientists is falling. The decline is "a quiet crisis building in the United States," a crisis that, if allowed to continue unchecked, could endanger America's well-being and preeminence among the world's nations. Past research on expert performance has shown that the cognitive traits of critical thinking, creativity, and problem solving possessed by top-tier performers can be identified, observed and measured. The studies show that the identified attributes are applicable across many domains and disciplines. Companies have begun to realize that cognitive skills are important for high-level performance and are reevaluating the traditional academic standards they have used to predict success for their top-tier performers in computer science. Previous research in the computer science field has focused either on programming skills of its experts or has attempted to predict the academic success of students at the undergraduate level. This study, on the other hand, examines the critical-thinking skills found among experts in the computer science field in order to explore the questions, "What cognitive skills do outstanding performers possess that make them successful?" and "How do currently used measures of academic performance correlate to critical-thinking skills among students?" The results

Automatic Identification of Critical Follow-Up Recommendation Sentences in Radiology Reports

PubMed Central

Yetisgen-Yildiz, Meliha; Gunn, Martin L.; Xia, Fei; Payne, Thomas H.

2011-01-01

Communication of follow-up recommendations when abnormalities are identified on imaging studies is prone to error. When recommendations are not systematically identified and promptly communicated to referrers, poor patient outcomes can result. Using information technology can improve communication and improve patient safety. In this paper, we describe a text processing approach that uses natural language processing (NLP) and supervised text classification methods to automatically identify critical recommendation sentences in radiology reports. To increase the classification performance we enhanced the simple unigram token representation approach with lexical, semantic, knowledge-base, and structural features. We tested different combinations of those features with the Maximum Entropy (MaxEnt) classification algorithm. Classifiers were trained and tested with a gold standard corpus annotated by a domain expert. We applied 5-fold cross validation and our best performing classifier achieved 95.60% precision, 79.82% recall, 87.0% F-score, and 99.59% classification accuracy in identifying the critical recommendation sentences in radiology reports. PMID:22195225

Automatic identification of critical follow-up recommendation sentences in radiology reports.

PubMed

Yetisgen-Yildiz, Meliha; Gunn, Martin L; Xia, Fei; Payne, Thomas H

2011-01-01

Communication of follow-up recommendations when abnormalities are identified on imaging studies is prone to error. When recommendations are not systematically identified and promptly communicated to referrers, poor patient outcomes can result. Using information technology can improve communication and improve patient safety. In this paper, we describe a text processing approach that uses natural language processing (NLP) and supervised text classification methods to automatically identify critical recommendation sentences in radiology reports. To increase the classification performance we enhanced the simple unigram token representation approach with lexical, semantic, knowledge-base, and structural features. We tested different combinations of those features with the Maximum Entropy (MaxEnt) classification algorithm. Classifiers were trained and tested with a gold standard corpus annotated by a domain expert. We applied 5-fold cross validation and our best performing classifier achieved 95.60% precision, 79.82% recall, 87.0% F-score, and 99.59% classification accuracy in identifying the critical recommendation sentences in radiology reports.

A new technology perspective and engineering tools approach for large, complex and distributed mission and safety critical systems components

NASA Technical Reports Server (NTRS)

Carrio, Miguel A., Jr.

1988-01-01

Rapidly emerging technology and methodologies have out-paced the systems development processes' ability to use them effectively, if at all. At the same time, the tools used to build systems are becoming obsolescent themselves as a consequence of the same technology lag that plagues systems development. The net result is that systems development activities have not been able to take advantage of available technology and have become equally dependent on aging and ineffective computer-aided engineering tools. New methods and tools approaches are essential if the demands of non-stop and Mission and Safety Critical (MASC) components are to be met.

Spacelab experiment definition study on phase transition and critical phenomena in fluids: Interim report on experimental justification

NASA Technical Reports Server (NTRS)

Moldover, M. R.; Hocken, M. R.; Gammon, R. W.; Sengers, J. V.

1976-01-01

Pure fluids and fluid mixtures near critical points are identified and are related to the progress of several disciplines. Consideration is given to thermodynamic properties, transport properties, and the complex nonlinear phenomena which occur when fluids undergo phase transitions in the critical region. The distinction is made between practical limits which may be extended by advances in technology and intrinsic ones which arise from the modification of fluid properties by the earth's gravitational field. The kinds of experiments near critical points which could best exploit the low gravity environment of an orbiting laboratory are identified. These include studies of the index of refraction, constant volume specific heat, and phase separation.

Workforce 2000 and the Mildly Handicapped. Identifying Emerging Issues and Trends in Technology for Special Education.

ERIC Educational Resources Information Center

Woodward, John

As part of a 3-year study to identify emerging issues and trends in technology for special education, this paper explores the changing nature of the workforce in relation to concurrent changes in education services for students with mild disabilities. Current trends are identified and projections for the next decade are offered, which include the…

Investigation of criticality safety control infraction data at a nuclear facility

DOE PAGES

Cournoyer, Michael E.; Merhege, James F.; Costa, David A.; ...

2014-10-27

Chemical and metallurgical operations involving plutonium and other nuclear materials account for most activities performed at the LANL's Plutonium Facility (PF-4). The presence of large quantities of fissile materials in numerous forms at PF-4 makes it necessary to maintain an active criticality safety program. The LANL Nuclear Criticality Safety (NCS) Program provides guidance to enable efficient operations while ensuring prevention of criticality accidents in the handling, storing, processing and transportation of fissionable material at PF-4. In order to achieve and sustain lower criticality safety control infraction (CSCI) rates, PF-4 operations are continuously improved, through the use of Lean Manufacturing andmore » Six Sigma (LSS) business practices. Employing LSS, statistically significant variations (trends) can be identified in PF-4 CSCI reports. In this study, trends have been identified in the NCS Program using the NCS Database. An output metric has been developed that measures ADPSM Management progress toward meeting its NCS objectives and goals. Using a Pareto Chart, the primary CSCI attributes have been determined in order of those requiring the most management support. Data generated from analysis of CSCI data help identify and reduce number of corresponding attributes. In-field monitoring of CSCI's contribute to an organization's scientific and technological excellence by providing information that can be used to improve criticality safety operation safety. This increases technical knowledge and augments operational safety.« less

A critical reflection on the technological development of deep brain stimulation (DBS)

PubMed Central

Ineichen, Christian; Glannon, Walter; Temel, Yasin; Baumann, Christian R.; Sürücü, Oguzkan

2014-01-01

Since the translational research findings of Benabid and colleagues which partly led to their seminal paper regarding the treatment of mainly tremor-dominant Parkinson patients through thalamic high-frequency-stimulation (HFS) in 1987, we still struggle with identifying a satisfactory mechanistic explanation of the underlying principles of deep brain stimulation (DBS). Furthermore, the technological advance of DBS devices (electrodes and implantable pulse generators, IPG’s) has shown a distinct lack of dynamic progression. In light of this we argue that it is time to leave the paleolithic age and enter hellenistic times: the device-manufacturing industry and the medical community together should put more emphasis on advancing the technology rather than resting on their laurels. PMID:25278864

Report of the Panel on Computer and Information Technology

NASA Technical Reports Server (NTRS)

Lundstrom, Stephen F.; Larsen, Ronald L.

1984-01-01

Aircraft have become more and more dependent on computers (information processing) for improved performance and safety. It is clear that this activity will grow, since information processing technology has advanced by a factor of 10 every 5 years for the past 35 years and will continue to do so. Breakthroughs in device technology, from vacuum tubes through transistors to integrated circuits, contribute to this rapid pace. This progress is nearly matched by similar, though not as dramatic, advances in numerical software and algorithms. Progress has not been easy. Many technical and nontechnical challenges were surmounted. The outlook is for continued growth in capability but will require surmounting new challenges. The technology forecast presented in this report has been developed by extrapolating current trends and assessing the possibilities of several high-risk research topics. In the process, critical problem areas that require research and development emphasis have been identified. The outlook assumes a positive perspective; the projected capabilities are possible by the year 2000, and adequate resources will be made available to achieve them. Computer and information technology forecasts and the potential impacts of this technology on aeronautics are identified. Critical issues and technical challenges underlying the achievement of forecasted performance and benefits are addressed.

Evaluation of technology to identify and assess overweight children and adolescents.

PubMed

Gance-Cleveland, Bonnie; Gilbert, Lynn H; Kopanos, Taynin; Gilbert, Kevin C

2010-01-01

The current obesity epidemic has produced a generation of children that may be the first to have a life expectancy shorter than their parents. To address the obesity epidemic, experts have published recommendations for providers. Research suggests the publication of guidelines may not change provider behavior. This study evaluates computer assistance for implementing obesity guidelines in school-based health centers. Significant improvements in identification and assessment of obesity in children with technology support were noted. Computer decision support shows promise for promoting the implementation of current recommendations by supporting providers in identifying, assessing, and providing tailored recommendations for children at risk of obesity.

Experimental Design for Evaluating Selected Nondestructive Measurement Technologies - Advanced Reactor Technology Milestone: M3AT-16PN2301043

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ramuhalli, Pradeep; Hirt, Evelyn H.; Pitman, Stan G.

The harsh environments in advanced reactors (AdvRx) increase the possibility of degradation of safety-critical passive components, and therefore pose a particular challenge for deployment and extended operation of these concepts. Nondestructive evaluation technologies are an essential element for obtaining information on passive component condition in AdvRx, with the development of sensor technologies for nondestructively inspecting AdvRx passive components identified as a key need. Given the challenges posed by AdvRx environments and the potential needs for reducing the burden posed by periodic in-service inspection of hard-to-access and hard-to-replace components, a viable solution may be provided by online condition monitoring of components.more » This report identifies the key challenges that will need to be overcome for sensor development in this context, and documents an experimental plan for sensor development, test, and evaluation. The focus of initial research and development is on sodium fast reactors, with the eventual goal of the research being developing the necessary sensor technology, quantifying sensor survivability and long-term measurement reliability for nondestructively inspecting critical components. Materials for sensor development that are likely to withstand the harsh environments are described, along with a status on the fabrication of reference specimens, and the planned approach for design and evaluation of the sensor and measurement technology.« less

Surveying wearable human assistive technology for life and safety critical applications: standards, challenges and opportunities.

PubMed

Alam, Muhammad Mahtab; Ben Hamida, Elyes

2014-05-23

In this survey a new application paradigm life and safety for critical operations and missions using wearable Wireless Body Area Networks (WBANs) technology is introduced. This paradigm has a vast scope of applications, including disaster management, worker safety in harsh environments such as roadside and building workers, mobile health monitoring, ambient assisted living and many more. It is often the case that during the critical operations and the target conditions, the existing infrastructure is either absent, damaged or overcrowded. In this context, it is envisioned that WBANs will enable the quick deployment of ad-hoc/on-the-fly communication networks to help save many lives and ensuring people's safety. However, to understand the applications more deeply and their specific characteristics and requirements, this survey presents a comprehensive study on the applications scenarios, their context and specific requirements. It explores details of the key enabling standards, existing state-of-the-art research studies, and projects to understand their limitations before realizing aforementioned applications. Application-specific challenges and issues are discussed comprehensively from various perspectives and future research and development directions are highlighted as an inspiration for new innovative solutions. To conclude, this survey opens up a good opportunity for companies and research centers to investigate old but still new problems, in the realm of wearable technologies, which are increasingly evolving and getting more and more attention recently.

Surveying Wearable Human Assistive Technology for Life and Safety Critical Applications: Standards, Challenges and Opportunities

PubMed Central

Alam, Muhammad Mahtab; Ben Hamida, Elyes

2014-01-01

In this survey a new application paradigm life and safety for critical operations and missions using wearable Wireless Body Area Networks (WBANs) technology is introduced. This paradigm has a vast scope of applications, including disaster management, worker safety in harsh environments such as roadside and building workers, mobile health monitoring, ambient assisted living and many more. It is often the case that during the critical operations and the target conditions, the existing infrastructure is either absent, damaged or overcrowded. In this context, it is envisioned that WBANs will enable the quick deployment of ad-hoc/on-the-fly communication networks to help save many lives and ensuring people's safety. However, to understand the applications more deeply and their specific characteristics and requirements, this survey presents a comprehensive study on the applications scenarios, their context and specific requirements. It explores details of the key enabling standards, existing state-of-the-art research studies, and projects to understand their limitations before realizing aforementioned applications. Application-specific challenges and issues are discussed comprehensively from various perspectives and future research and development directions are highlighted as an inspiration for new innovative solutions. To conclude, this survey opens up a good opportunity for companies and research centers to investigate old but still new problems, in the realm of wearable technologies, which are increasingly evolving and getting more and more attention recently. PMID:24859024

Critical ICT-Inhibiting Factors on IBS Production Management Processes in the Malaysia Construction Industry

NASA Astrophysics Data System (ADS)

Ern, Peniel Ang Soon; Kasim, Narimah; Hamid, Zuhairi Abd; Chen, Goh Kai

2017-10-01

Industrialized Building System (IBS) is one of the approaches that had been introduced as an alternative to conventional building method where it becomes the new strategy of enhancing the sustainable construction in current industries while spearheading a huge advancement of benefits with green constructions into the existing industries. The IBS approach is actively promoted through several strategies and incentives as an alternative to conventional building methods. Extensive uptakes of modern Information Communication Technology (ICT) applications are able to support the different IBS processes for effective production. However, it is argued that ICT uptake at the organisational level is still in its infancy. This raises the importance to identify critical inhibitors which are inhibing the effective uptake of ICT in the IBS production management process. Critical inhibitors to ICT uptake were identified through questionnaire survey with the IBS industry stakeholders. The mean index and critical t-values are generated with the use of the quantitative tool, Statistical Package for Social Sciences (SPSS). The top ten priority ranked inhibitors reflect the Cost, People and Process elements to ICT uptake. High costs in acquiring the technologies and resistance to change were some main concerns from the findings.

The Influence of Tablet-Based Technology on the Development of Communication and Critical Thinking Skills: An Interdisciplinary Study

ERIC Educational Resources Information Center

Bagdasarov, Zhanna; Luo, Yupeng; Wu, Wei

2017-01-01

The purpose of this interdisciplinary study was to explore the impacts of tablet technology in a college classroom on students' perceptions of their own learning. Students were asked about oral, written, and graphical communication and critical thinking skills. Mid-semester and end-of-semester surveys were administered to tablet-enabled classes…

Information technology systems for critical care triage and medical response during an influenza pandemic: a review of current systems.

PubMed

Bandayrel, Kristofer; Lapinsky, Stephen; Christian, Michael

2013-06-01

To assess local, state, federal, and global pandemic influenza preparedness by identifying pandemic plans at the local, state, federal, and global levels, and to identify any information technology (IT) systems in these plans to support critical care triage during an influenza pandemic in the Canadian province of Ontario. The authors used advanced MEDLINE and Google search strategies and conducted a comprehensive review of key pandemic influenza Web sites. Descriptive data extraction and analysis for IT systems were conducted on all of the included pandemic plans. A total of 155 pandemic influenza plans were reviewed: 29 local, 62 state, 63 federal, and 1 global. We found 70 plans that examined IT systems (10 local, 33 state, 26 federal, 1 global), and 85 that did not (19 local, 29 state, 37 federal). Of the 70 plans, 64 described surveillance systems (10 local, 32 state, 21 federal, 1 global), 2 described patient data collection systems (1 state, 1 federal); 4 described other types of IT systems (4 federal), and none were intended for triage. Although several pandemic plans have been drafted, the majority are high-level general documents that do not describe IT systems. The plans that discuss IT systems focus strongly on surveillance, which fails to recognize the needs of a health care system responding to an influenza pandemic. The best examples of the types of IT systems to guide decision making during a pandemic were found in the Kansas and the Czech Republic pandemic plans, because these systems were designed to collect both patient and surveillance data. Although Ontario has yet to develop such an IT system, several IT systems are in place that could be leveraged to support critical care triage and medical response during an influenza pandemic.

Technology requirements for an orbiting fuel depot: A necessary element of a space infrastructure

NASA Technical Reports Server (NTRS)

Stubbs, R. M.; Corban, R. R.; Willoughby, A. J.

1988-01-01

Advanced planning within NASA has identified several bold space exploration initiatives. The successful implementation of these missions will require a supporting space infrastructure which would include a fuel depot, an orbiting facility to store, transfer and process large quantities of cryogenic fluids. In order to adequately plan the technology development programs required to enable the construction and operation of a fuel depot, a multidisciplinary workshop was convened to assess critical technologies and their state of maturity. Since technology requirements depend strongly on the depot design assumptions, several depot concepts are presented with their effect on criticality ratings. Over 70 depot-related technology areas are addressed.

Technology requirements for an orbiting fuel depot - A necessary element of a space infrastructure

NASA Technical Reports Server (NTRS)

Stubbs, R. M.; Corban, R. R.; Willoughby, A. J.

1988-01-01

Advanced planning within NASA has identified several bold space exploration initiatives. The successful implementation of these missions will require a supporting space infrastructure which would include a fuel depot, an orbiting facility to store, transfer and process large quantities of cryogenic fluids. In order to adequately plan the technology development programs required to enable the construction and operation of a fuel depot, a multidisciplinary workshop was convened to assess critical technologies and their state of maturity. Since technology requirements depend strongly on the depot design assumptions, several depot concepts are presented with their effect of criticality ratings. Over 70 depot-related technology areas are addressed.

Heat adaptation of bioabsorbable craniofacial plates: a critical review of science and technology.

PubMed

Pietrzak, William S

2009-11-01

Bioabsorbable fixation plates often require adaptation to the bone. This is typically accomplished by heating the plates to above the glass transition temperature and placing the softened plates against the bone or a prebent template until cool. Upon cooling, the plates regain stiffness and can be attached to bone to obtain anatomic fixation. This procedure is both efficient and effective and has been used throughout the craniofacial skeleton. There are many types of equipment available to heat the plates, each with advantages and disadvantages. Although a conceptually simple process, there are several nuances that have been reported in the literature, including transient effects on plate mechanical properties, memory effects, differences between wet and dry heating, and others. Upon the backdrop of the overwhelming clinical success of heat adaptation, this review critically evaluates the method and provides a comprehensive examination and explanation of the basic science and technology involved. This should help give surgeons a better understanding of the process that can help improve their use and further advance the technology.

PDB2Graph: A toolbox for identifying critical amino acids map in proteins based on graph theory.

PubMed

Niknam, Niloofar; Khakzad, Hamed; Arab, Seyed Shahriar; Naderi-Manesh, Hossein

2016-05-01

The integrative and cooperative nature of protein structure involves the assessment of topological and global features of constituent parts. Network concept takes complete advantage of both of these properties in the analysis concomitantly. High compatibility to structural concepts or physicochemical properties in addition to exploiting a remarkable simplification in the system has made network an ideal tool to explore biological systems. There are numerous examples in which different protein structural and functional characteristics have been clarified by the network approach. Here, we present an interactive and user-friendly Matlab-based toolbox, PDB2Graph, devoted to protein structure network construction, visualization, and analysis. Moreover, PDB2Graph is an appropriate tool for identifying critical nodes involved in protein structural robustness and function based on centrality indices. It maps critical amino acids in protein networks and can greatly aid structural biologists in selecting proper amino acid candidates for manipulating protein structures in a more reasonable and rational manner. To introduce the capability and efficiency of PDB2Graph in detail, the structural modification of Calmodulin through allosteric binding of Ca(2+) is considered. In addition, a mutational analysis for three well-identified model proteins including Phage T4 lysozyme, Barnase and Ribonuclease HI, was performed to inspect the influence of mutating important central residues on protein activity. Copyright © 2016 Elsevier Ltd. All rights reserved.

Critical shear stress measurement of cohesive soils in streams: identifying device-dependent variability using an in-situ jet test device and conduit flume

NASA Astrophysics Data System (ADS)

Mahalder, B.; Schwartz, J. S.; Palomino, A.; Papanicolaou, T.

2016-12-01

Cohesive soil erodibility and threshold shear stress for stream bed and bank are dependent on both soil physical and geochemical properties in association with the channel vegetative conditions. These properties can be spatially variable therefore making critical shear stress measurement in cohesive soil challenging and leads to a need for a more comprehensive understanding of the erosional processes in streams. Several in-situ and flume-type test devices for estimating critical shear stress have been introduced by different researchers; however reported shear stress estimates per device vary widely in orders of magnitude. Advantages and disadvantages exist between these devices. Development of in-situ test devices leave the bed and/or bank material relatively undisturbed and can capture the variable nature of field soil conditions. However, laboratory flumes provide a means to control environmental conditions that can be quantify and tested. This study was conducted to observe differences in critical shear stress using jet tester and a well-controlled conduit flume. Soil samples were collected from the jet test locations and tested in a pressurized flume following standard operational procedure to calculate the critical shear stress. The results were compared using statistical data analysis (mean-separation ANOVA procedure) to identify possible differences. In addition to the device comparison, the mini jet device was used to measure critical shear stress across geologically diverse regions of Tennessee, USA. Statistical correlation between critical shear stress and the soil physical, and geochemical properties were completed identifying that geological origin plays a significant role in critical shear stress prediction for cohesive soils. Finally, the critical shear stress prediction equations using the jet test data were examined with possible suggestions to modify based on the flume test results.

Follow-On Technology Requirement Study for Advanced Subsonic Transport

NASA Technical Reports Server (NTRS)

Wendus, Bruce E.; Stark, Donald F.; Holler, Richard P.; Funkhouser, Merle E.

2003-01-01

A study was conducted to define and assess the critical or enabling technologies required for a year 2005 entry into service (EIS) engine for subsonic commercial aircraft, with NASA Advanced Subsonic Transport goals used as benchmarks. The year 2005 EIS advanced technology engine is an Advanced Ducted Propulsor (ADP) engine. Performance analysis showed that the ADP design offered many advantages compared to a baseline turbofan engine. An airplane/ engine simulation study using a long range quad aircraft quantified the effects of the ADP engine on the economics of typical airline operation. Results of the economic analysis show the ADP propulsion system provides a 6% reduction in direct operating cost plus interest, with half the reduction resulting from reduced fuel consumption. Critical and enabling technologies for the year 2005 EIS ADP were identified and prioritized.

A concise guide for the determination of less-studied technology-critical elements (Nb, Ta, Ga, In, Ge, Te) by inductively coupled plasma mass spectrometry in environmental samples

NASA Astrophysics Data System (ADS)

Filella, Montserrat; Rodushkin, Ilia

2018-03-01

There is an increasing demand for analytical techniques able to measure so-called 'technology-critical elements', a set of chemical elements increasingly used in technological applications, in environmental matrices. Nowadays, inductively coupled plasma-mass spectrometry (ICP-MS) has become the technique of choice for measuring trace element concentrations. However, its application is often less straightforward than often assumed. The hints and drawbacks of ICP-MS application to the measurement of a set of less-studied technology-critical elements (Nb, Ta, Ga, In, Ge and Te) is discussed here and concise guidelines given.

Groundwork for the Concept of Technique in Education: Herbert Marcuse and Technological Society

ERIC Educational Resources Information Center

Pierce, Clayton

2006-01-01

This article articulates the groundwork for a new understanding of the concept of technique through a critical engagement with Herbert Marcuse's critical theory of technology. To this end, it identifies and engages three expressions of technique in Marcuse's work: mimesis, reified labor, and the happy consciousness. It is argued that this mapping…

Nuclear criticality safety: 5-day training course

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schlesser, J.A.

1992-11-01

This compilation of notes is presented as a source reference for the criticality safety course. It represents the contributions of many people, particularly Tom McLaughlin, the course's primary instructor. At the completion of this training course, the attendee will: be able to define terms commonly used in nuclear criticality safety; be able to appreciate the fundamentals of nuclear criticality safety; be able to identify factors which affect nuclear criticality safety; be able to identify examples of criticality controls as used at Los Alamos; be able to identify examples of circumstances present during criticality accidents; be able to identify examples ofmore » computer codes used by the nuclear criticality safety specialist; be able to identify examples of safety consciousness required in nuclear criticality safety.« less

Optical Manufacturing and Testing Requirements Identified by the NASA Science Instruments, Observatories and Sensor Systems Technology Assessment

NASA Technical Reports Server (NTRS)

Stahl, H. Philip; Barney, Rich; Bauman, Jill; Feinberg, Lee; Mcleese, Dan; Singh, Upendra

2011-01-01

In August 2010, the NASA Office of Chief Technologist (OCT) commissioned an assessment of 15 different technology areas of importance to the future of NASA. Technology assessment #8 (TA8) was Science Instruments, Observatories and Sensor Systems (SIOSS). SIOSS assess the needs for optical technology ranging from detectors to lasers, x-ray mirrors to microwave antenna, in-situ spectrographs for on-surface planetary sample characterization to large space telescopes. The needs assessment looked across the entirety of NASA and not just the Science Mission Directorate. This paper reviews the optical manufacturing and testing technologies identified by SIOSS which require development in order to enable future NASA high priority missions.

Identifying Cybersecurity Risks to Critical Infrastructure Act of 2012

THOMAS, 112th Congress

Rep. Clarke, Yvette D. [D-NY-11

2012-07-26

House - 08/15/2012 Referred to the Subcommittee on Cybersecurity, Infrastructure Protection, and Security Technologies. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Identifying Critical Ephemeral Streams and Reducing Impacts Associated with Utility-Scale Solar Energy Development in the Southwest United States

NASA Astrophysics Data System (ADS)

O'Connor, B. L.; Carr, A.; Patton, T.; Hamada, Y.

2011-12-01

The Bureau of Land Management (BLM) and the Department of Energy are preparing a joint programmatic environmental impact statement (PEIS) assessing the potential impacts of utility-scale solar energy development on BLM-administered lands in six southwestern states. One of the alternatives considered in the PEIS involves development within identified solar energy zones (SEZs) that individually cover approximately 10 to 1,000 km2, located primarily in desert valleys of the Basin and Range physiographic region. Land-disturbing activities in these alluvium-filled valleys have the potential to adversely affect ephemeral streams with respect to their hydrologic, geomorphic, and ecologic functions. Regulation and management of ephemeral streams typically falls under the spectrum of federal, state, and local programs, but scientifically based guidelines for protecting ephemeral streams with respect to land-development activities are largely nonexistent. The PEIS analysis attempts to identify critical ephemeral streams by evaluating the integral functions of flood conveyance, sediment transport, groundwater recharge, and supporting ecological habitats. The initial approach to classifying critical ephemeral streams involved identifying large, erosional features using available flood hazards mapping, historical peak discharges, and aerial photographs. This approach identified ephemeral features not suitable for development (based primarily on the likelihood of damaging floods and debris flows) to address flood conveyance and sediment transport functions of ephemeral streams. Groundwater recharge and the maintenance of riparian vegetation and wildlife habitats are other functions of ephemeral streams. These functions are typically associated with headwater reaches rather than large-scale erosional features. Recognizing that integral functions of ephemeral streams occur over a range of spatial scales and are driven by varying climatic-hydrologic events, the PEIS analysis

Critical appraisal of nonrandomized studies-A review of recommended and commonly used tools.

PubMed

Quigley, Joan M; Thompson, Juliette C; Halfpenny, Nicholas J; Scott, David A

2018-02-27

When randomized controlled trial data are limited or unavailable, or to supplement randomized controlled trial evidence, health technology assessment (HTA) agencies may rely on systematic reviews of nonrandomized studies (NRSs) for evidence of the effectiveness of health care interventions. NRS designs may introduce considerable bias into systematic reviews, and several methodologies by which to evaluate this risk of bias are available. This study aimed to identify tools commonly used to assess bias in NRS and determine those recommended by HTA bodies. Appraisal tools used in NRS were identified through a targeted search of systematic reviews (January 2013-March 2017; MEDLINE and EMBASE [OVID SP]). Recommendations for the critical appraisal of NRS by expert review groups and HTA bodies were reviewed. From the 686 studies included in the narrative synthesis, 48 critical appraisal tools were identified. Commonly used tools included the Newcastle-Ottawa Scale, the methodological index for NRS, and bespoke appraisal tools. Neither the Cochrane Handbook nor the Centre for Reviews and Dissemination recommends a particular instrument for the assessment of risk of bias in NRS, although Cochrane has recently developed their own NRS critical appraisal tool. Among HTA bodies, only the Canadian Agency for Drugs and Technologies in Health recommends use of a specific critical appraisal tool-SIGN 50 (for cohort or case-control studies). Several criteria including reporting, external validity, confounding, and power were examined. There is no consensus between HTA groups on the preferred appraisal tool. Reviewers should select from a suite of tools on the basis of the design of studies included in their review. © 2018 John Wiley & Sons, Ltd.

Pilot Critical Incident Reports as a Means to Identify Human Factors of Remotely Piloted Aircraft

NASA Technical Reports Server (NTRS)

Hobbs, Alan; Cardoza, Colleen; Null, Cynthia

2016-01-01

It has been estimated that aviation accidents are typically preceded by numerous minor incidents arising from the same causal factors that ultimately produced the accident. Accident databases provide in-depth information on a relatively small number of occurrences, however incident databases have the potential to provide insights into the human factors of Remotely Piloted Aircraft System (RPAS) operations based on a larger volume of less-detailed reports. Currently, there is a lack of incident data dealing with the human factors of unmanned aircraft systems. An exploratory study is being conducted to examine the feasibility of collecting voluntary critical incident reports from RPAS pilots. Twenty-three experienced RPAS pilots volunteered to participate in focus groups in which they described critical incidents from their own experience. Participants were asked to recall (1) incidents that revealed a system flaw, or (2) highlighted a case where the human operator contributed to system resilience or mission success. Participants were asked to only report incidents that could be included in a public document. During each focus group session, a note taker produced a de-identified written record of the incident narratives. At the end of the session, participants reviewed each written incident report, and made edits and corrections as necessary. The incidents were later analyzed to identify contributing factors, with a focus on design issues that either hindered or assisted the pilot during the events. A total of 90 incidents were reported. Human factor issues included the impact of reduced sensory cues, traffic separation in the absence of an out-the-window view, control latencies, vigilance during monotonous and ultra-long endurance flights, control station design considerations, transfer of control between control stations, the management of lost link procedures, and decision-making during emergencies. Pilots participated willingly and enthusiastically in the study

Technology Development and Demonstration Concepts for the Space Elevator

NASA Technical Reports Server (NTRS)

Smitherman, David V., Jr.

2004-01-01

During the 1990s several discoveries and advances in the development of carbon nano-tube (CNT) materials indicated that material strengths many times greater than common high-strength composite materials might be possible. Progress in the development of this material led to renewed interest in the space elevator concept for construction of a tether structure from the surface of the Earth through a geostationary orbit (GEO) and thus creating a new approach to Earth-to-orbit transportation infrastructures. To investigate this possibility the author, in 1999, managed for NASA a space elevator work:hop at the Marshall Space Flight Center to explore the potential feasibility of space elevators in the 21 century, and to identify the critical technologies and demonstration missions needed to make development of space elevators feasible. Since that time, a NASA Institute for Advanced Concepts (NIAC) funded study of the Space Elevator proposed a concept for a simpler first space elevator system using more near-term technologies. This paper will review some of the latest ideas for space elevator development, the critical technologies required, and some of the ideas proposed for demonstrating the feasibility for full-scale development of an Earth to GEO space elevator. Critical technologies include CNT composite materials, wireless power transmission, orbital object avoidance, and large-scale tether deployment and control systems. Numerous paths for technology demonstrations have been proposed utilizing ground experiments, air structures. LEO missions, the space shuttle, the international Space Station, GEO demonstration missions, demonstrations at the lunar L1 or L2 points, and other locations. In conclusion, this paper finds that the most critical technologies for an Earth to GEO space elevator include CNT composite materials development and object avoidance technologies; that lack of successful development of these technologies need not preclude continued development of

Thin Film CIGS and CdTe Photovoltaic Technologies: Commercialization, Critical Issues, and Applications; Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ullal, H. S.; von Roedern, B.

2007-09-01

We report here on the major commercialization aspects of thin-film photovoltaic (PV) technologies based on CIGS and CdTe (a-Si and thin-Si are also reported for completeness on the status of thin-film PV). Worldwide silicon (Si) based PV technologies continues to dominate at more than 94% of the market share, with the share of thin-film PV at less than 6%. However, the market share for thin-film PV in the United States continues to grow rapidly over the past several years and in CY 2006, they had a substantial contribution of about 44%, compared to less than 10% in CY 2003. Inmore » CY 2007, thin-film PV market share is expected to surpass that of Si technology in the United States. Worldwide estimated projections for CY 2010 are that thin-film PV production capacity will be more than 3700 MW. A 40-MW thin-film CdTe solar field is currently being installed in Saxony, Germany, and will be completed in early CY 2009. The total project cost is Euro 130 million, which equates to an installed PV system price of Euro 3.25/-watt averaged over the entire solar project. This is the lowest price for any installed PV system in the world today. Critical research, development, and technology issues for thin-film CIGS and CdTe are also elucidated in this paper.« less

Technology Implementation in Education--Identifying Barriers to Fidelity

ERIC Educational Resources Information Center

Dennis, William J.; Johnson, Daniel L.; Monroe, Arla K.

2012-01-01

This report describes a problem-based learning project focused on determining the barriers to the implementation of technological innovations. Research findings offered evidence that properly executed technology implementation is an instructional variable related to student achievement; yet, school district leaders are faced with the problem of…

Data availability and the need for research to localize, quantify and recycle critical metals in information technology, telecommunication and consumer equipment.

PubMed

Chancerel, Perrine; Rotter, Vera Susanne; Ueberschaar, Maximilian; Marwede, Max; Nissen, Nils F; Lang, Klaus-Dieter

2013-10-01

The supply of critical metals like gallium, germanium, indium and rare earths elements (REE) is of technological, economic and strategic relevance in the manufacturing of electrical and electronic equipment (EEE). Recycling is one of the key strategies to secure the long-term supply of these metals. The dissipation of the metals related to the low concentrations in the products and to the configuration of the life cycle (short use time, insufficient collection, treatment focusing on the recovery of other materials) creates challenges to achieve efficient recycling. This article assesses the available data and sets priorities for further research aimed at developing solutions to improve the recycling of seven critical metals or metal families (antimony, cobalt, gallium, germanium, indium, REE and tantalum). Twenty-six metal applications were identified for those six metals and the REE family. The criteria used for the assessment are (i) the metal criticality related to strategic and economic issues; (ii) the share of the worldwide mine or refinery production going to EEE manufacturing; (iii) rough estimates of the concentration and the content of the metals in the products; (iv) the accuracy of the data already available; and (v) the occurrence of the application in specific WEEE groups. Eight applications were classified as relevant for further research, including the use of antimony as a flame retardant, gallium and germanium in integrated circuits, rare earths in phosphors and permanent magnets, cobalt in batteries, tantalum capacitors and indium as an indium-tin-oxide transparent conductive layer in flat displays.

Identifying and Assessing Effective Mechanisms for Technology Transfer

DTIC Science & Technology

2007-03-01

There is a distinct manner in which civilian technology is protected; even though secrecy is one option, as is the case with the Coca - Cola formula...done with the appropriate dedicated resources. They also placed heavy emphasis on acquiring early sponsorship for the technology and be able to set

Critical factors influencing physicians' intention to use computerized clinical practice guidelines: an integrative model of activity theory and the technology acceptance model.

PubMed

Hsiao, Ju-Ling; Chen, Rai-Fu

2016-01-16

With the widespread use of information communication technologies, computerized clinical practice guidelines are developed and considered as effective decision supporting tools in assisting the processes of clinical activities. However, the development of computerized clinical practice guidelines in Taiwan is still at the early stage and acceptance level among major users (physicians) of computerized clinical practice guidelines is not satisfactory. This study aims to investigate critical factors influencing physicians' intention to computerized clinical practice guideline use through an integrative model of activity theory and the technology acceptance model. The survey methodology was employed to collect data from physicians of the investigated hospitals that have implemented computerized clinical practice guidelines. A total of 505 questionnaires were sent out, with 238 completed copies returned, indicating a valid response rate of 47.1 %. The collected data was then analyzed by structural equation modeling technique. The results showed that attitudes toward using computerized clinical practice guidelines (γ = 0.451, p < 0.001), organizational support (γ = 0.285, p < 0.001), perceived usefulness of computerized clinical practice guidelines (γ = 0.219, p < 0.05), and social influence (γ = 0.213, p < 0.05) were critical factors influencing physicians' intention to use computerized clinical practice guidelines, and these factors can explain 68.6 % of the variance in intention to use computerized clinical practice guidelines. This study confirmed that some subject (human) factors, environment (organization) factors, tool (technology) factors mentioned in the activity theory should be carefully considered when introducing computerized clinical practice guidelines. Managers should pay much attention on those identified factors and provide adequate resources and incentives to help the promotion and use of computerized clinical

Simple indicator to identify the environmental soundness of growth of consumption and technology: "eco-velocity of consumption".

PubMed

Nansai, Keisuke; Kagawa, Shigemi; Suh, Sangwon; Inaba, Rokuta; Moriguchi, Yuichi

2007-02-15

Today's material welfare has been achieved at the expense of consumption of finite resources and generation of environmental burdens. Over the past few decades the volume of global consumption has grown dramatically, while at the same time technological advances have enabled products with greater efficiencies. These two directions of change, consumption growth and technological advance, are the foci of the present paper. Using quantitative measures for these two factors, we define a new indicator, "eco-velocity of consumption", analogous to velocity in physics. The indicator not only identifies the environmental soundness of consumption growth and technological advance but also indicates whether and to what extent our society is shifting toward sustainable consumption. This study demonstrates the practicability of the indicator through a case study in which we calculate the eco-velocities of Japanese household consumption in 2 years: 1995 and 2000. The rate of technological advance during the periods concerned is quantified in terms of the embodied carbon dioxide emission per yen of product. The results show that the current growth rate of Japanese household consumption is greater than the rate of technological advance to mitigate carbon dioxide emissions. The eco-velocities at the level of individual commodity groups are also examined, and the sources of changes in eco-velocity for each commodity are identified using structural decomposition analysis.

Critical Value Reporting at Egyptian Laboratories.

PubMed

Mosallam, Rasha; Ibrahim, Samaa Zenhom

2015-06-12

To examine critical value reporting policies and practices and to identify critical value ranges for selected common laboratory assays at inpatient division of laboratories of Alexandria hospitals. A cross-sectional descriptive study design was used. Subjects were from inpatient division of all laboratories of Alexandria hospitals (40 laboratories). Data were collected using a questionnaire composed of 4 sections. The first section explored hospital and laboratory characteristics. The second section assessed policies and procedures of critical value reporting. The third section explored the reporting process. The fourth section explored critical value ranges for selected common laboratory assays. Written procedure for reporting of critical values was present in 77.5% of laboratories and a comprehensive list of critical values in 72.55%. For laboratories having a critical value list, the number of tests in the list ranged from 7 to 40. Three-fifths of laboratories had a policy for assessing the timeliness of reporting and 3 quarters stated that the laboratory policy requires feedback (60.0% and 75.0%, respectively). The hospital laboratory physician was responsible for critical value reporting followed by the laboratory technician (75.0% and 50.0%, respectively). The call is received mainly by nurses and physicians ordering the test (67.5% and 55.0%, respectively) and the channel of reporting is mainly the telephone or through sending test report to the ward (67.5% and 50.0%, respectively). Wireless technologies are used in reporting in only 10.0% of hospitals. The cutoff limits for reporting different assays showed considerable interlaboratory variation. Critical value policies and practices showed interinstitutional variation with deficiencies in some reporting practices. Selection of critical assays for notification and setting the limits of notification exhibited wide variation as well.

A Resource Guide Identifying Technology Tools for Schools. Appendix

ERIC Educational Resources Information Center

Fox, Christine; Jones, Rachel

2009-01-01

SETDA and NASTID's "Technology Tools for Schools Resource Guide" provides definitions of key technology components and relevant examples, where appropriate as a glossary for educators. The guide also presents essential implementation and infrastructure considerations that decision makers should think about when implementing technology in schools.…

Critical event management with geographic information system technology

NASA Astrophysics Data System (ADS)

Booth, John F.; Young, Jeffrey M.

1997-02-01

Critical event management at the Los Angeles County Regional Criminal Information Clearinghouse (LACRCIC) provides for the deconfliction of operations, such as reverse stings, arrests, undercover buys/busts, searches, surveillances, and site surveys in the Los Angeles, Orange, Riverside, and San Bernardino county area. During these operations, the opportunity for officer-to-officer confrontation is high, possibly causing a worse case scenario -- officers drawing on each other resulting in friendly fire injuries or casualties. In order to prevent local, state, and federal agencies in the Los Angeles area from experiencing this scenario, the LACRCIC provides around the clock critical event management services via its secure war room. The war room maintains a multicounty detailed street-level map base and geographic information system (GIS) application to support this effort. Operations are telephoned in by the participating agencies and posted in the critical event management system by war room analysts. The application performs both a proximity search around the address and a commonality of suspects search. If a conflict is found, the system alerts the analyst by sounding an audible alarm and flashing the conflicting events on the automated basemap. The analyst then notifies the respective agencies of the conflicting critical events so coordination or rescheduling can occur.

Identifying the Ethical Challenges Encountered by Information Technology Professionals Working within the Nevada Casino Industry

ERIC Educational Resources Information Center

Essig, Michael R.

2014-01-01

A thematic analysis qualitative study was used to identify the unethical challenges encountered by Information Technology (IT) professionals working within the Nevada casino industry. Fourteen current and former IT leaders working or who worked in the Nevada casino industry were interviewed. Using thematic analysis, nine themes regarding ethical…

A new approach to hazardous materials transportation risk analysis: decision modeling to identify critical variables.

PubMed

Clark, Renee M; Besterfield-Sacre, Mary E

2009-03-01

We take a novel approach to analyzing hazardous materials transportation risk in this research. Previous studies analyzed this risk from an operations research (OR) or quantitative risk assessment (QRA) perspective by minimizing or calculating risk along a transport route. Further, even though the majority of incidents occur when containers are unloaded, the research has not focused on transportation-related activities, including container loading and unloading. In this work, we developed a decision model of a hazardous materials release during unloading using actual data and an exploratory data modeling approach. Previous studies have had a theoretical perspective in terms of identifying and advancing the key variables related to this risk, and there has not been a focus on probability and statistics-based approaches for doing this. Our decision model empirically identifies the critical variables using an exploratory methodology for a large, highly categorical database involving latent class analysis (LCA), loglinear modeling, and Bayesian networking. Our model identified the most influential variables and countermeasures for two consequences of a hazmat incident, dollar loss and release quantity, and is one of the first models to do this. The most influential variables were found to be related to the failure of the container. In addition to analyzing hazmat risk, our methodology can be used to develop data-driven models for strategic decision making in other domains involving risk.

Technology requirements and readiness for very large vehicles

NASA Technical Reports Server (NTRS)

Conner, D. W.

1979-01-01

Common concerns of very large vehicles in the areas of economics, transportation system interfaces and operational problems were reviewed regarding their influence on vehicle configurations and technology. Fifty-four technology requirements were identified which are judged to be unique, or particularly critical, to very large vehicles. The requirements were about equally divided among the four general areas of aero/hydrodynamics, propulsion and acoustics, structures, and vehicle systems and operations. The state of technology readiness was judged to be poor to fair for slightly more than one half of the requirements. In the classic disciplinary areas, the state of technology readiness appears to be more advanced than for vehicle systems and operations.

Coupling between Metacognition and Emotions during STEM Learning with Advanced Learning Technologies: A Critical Analysis, Implications for Future Research, and Design of Learning Systems

ERIC Educational Resources Information Center

Azevedo, Roger; Mudrick, Nicholas; Taub, Michelle; Wortha, Franz

2017-01-01

Metacognition and emotions play a critical role in learners' ability to monitor and regulate their learning about 21st-century skills related to science, technology, engineering, and mathematics (STEM) content while using advanced learning technologies (ALTs; e.g., intelligent tutoring systems, serious games, hypermedia, augmented reality). In…

Blending Technology and Face-to-Face: Advanced Students' Choices

ERIC Educational Resources Information Center

Trinder, Ruth

2016-01-01

It has been suggested that current research in computer-assisted language learning (CALL) should seek to understand the conditions and circumstances that govern students' use of technology (Steel & Levy, 2013). This paper attempts to identify critical factors accounting for student choices, first, by investigating advanced learners' reported…

Critical Literacy: Foundational Notes

ERIC Educational Resources Information Center

Luke, Allan

2012-01-01

The term "critical literacy" refers to use of the technologies of print and other media of communication to analyze, critique, and transform the norms, rule systems, and practices governing the social fields of everyday life (A. Luke, 2004). Since Freire's (1970) educational projects in Brazil, approaches to critical literacy have been…

Global trends in critical values practices and their harmonization.

PubMed

Kost, Gerald J; Hale, Kristin N

2011-02-01

The objectives of this article were 1) to identify current trends in critical values practices in North America, Europe, and other regions; 2) to describe progress toward harmonization of critical limits; and 3) to synthesize strategies that will encourage global consensus. Critical limits are described in national surveys. Critical value practices are guided by federal statutes, The Joint Commission regulations, and accreditation requirements in the US; by provincial healthcare agencies in Canada; by thought leaders and ISO EN 15189:2007 in Europe; and in SE Asia, mostly by ad hoc policies lacking statutory grip. Review of databases, literature, websites, federal statutes, litigation, official policies, current affairs, and accreditation agency requirements. Practical strategies will accelerate harmonization of critical values practices, as follows: a) continue national and international survey comparisons; b) clarify age, ethnic, and subject dependencies; c) standardize qualitative and quantitative decision levels for urgent clinician notification; d) monitor compliance and timeliness for safety; and e) alert high frequencies of critical values related to adverse events. New expectations and communication technologies present opportunities for enhanced performance using wireless closed-loop reporting with recipient acknowledgment to reduce phone calls and improve efficiency. Hospitals worldwide can benefit from developing consensus for critical values practices.

Technological Literacy for Students Aged 6-18: A New Method for Holistic Measuring of Knowledge, Capabilities, Critical Thinking and Decision-Making

ERIC Educational Resources Information Center

Avsec, Stanislav; Jamšek, Janez

2016-01-01

Technological literacy is identified as a vital achievement of technology- and engineering-intensive education. It guides the design of technology and technical components of educational systems and defines competitive employment in technological society. Existing methods for measuring technological literacy are incomplete or complicated,…

Employers' Perceptions of Basic Technology Skills Needed for Workplace Preparation in Adult Basic Education

ERIC Educational Resources Information Center

Yow, Alma V.

2010-01-01

Research has documented that many new entrants to the workforce from adult basic education (ABE) programs are critically lacking in the preparation and technology skills needed for workplace success. To address this problem, this basic interpretive qualitative study was implemented to examine and identify the basic technology skills perceived by…

Advanced Technology Composite Fuselage-Structural Performance

NASA Technical Reports Server (NTRS)

Walker, T. H.; Minguet, P. J.; Flynn, B. W.; Carbery, D. J.; Swanson, G. D.; Ilcewicz, L. B.

1997-01-01

Boeing is studying the technologies associated with the application of composite materials to commercial transport fuselage structure under the NASA-sponsored contracts for Advanced Technology Composite Aircraft Structures (ATCAS) and Materials Development Omnibus Contract (MDOC). This report addresses the program activities related to structural performance of the selected concepts, including both the design development and subsequent detailed evaluation. Design criteria were developed to ensure compliance with regulatory requirements and typical company objectives. Accurate analysis methods were selected and/or developed where practical, and conservative approaches were used where significant approximations were necessary. Design sizing activities supported subsequent development by providing representative design configurations for structural evaluation and by identifying the critical performance issues. Significant program efforts were directed towards assessing structural performance predictive capability. The structural database collected to perform this assessment was intimately linked to the manufacturing scale-up activities to ensure inclusion of manufacturing-induced performance traits. Mechanical tests were conducted to support the development and critical evaluation of analysis methods addressing internal loads, stability, ultimate strength, attachment and splice strength, and damage tolerance. Unresolved aspects of these performance issues were identified as part of the assessments, providing direction for future development.

Aerocapture Technology Development Needs for Outer Planet Exploration

NASA Technical Reports Server (NTRS)

Wercinski, Paul; Munk, Michelle; Powell, Richard; Hall, Jeff; Graves, Claude; Partridge, Harry (Technical Monitor)

2002-01-01

The purpose of this white paper is to identify aerocapture technology and system level development needs to enable NASA future mission planning to support Outer Planet Exploration. Aerocapture is a flight maneuver that takes place at very high speeds within a planet's atmosphere that provides a change in velocity using aerodynamic forces (in contrast to propulsive thrust) for orbit insertion. Aerocapture is very much a system level technology where individual disciplines such as system analysis and integrated vehicle design, aerodynamics, aerothermal environments, thermal protection systems (TPS), guidance, navigation and control (GN&C) instrumentation need to be integrated and optimized to meet mission specific requirements. This paper identifies on-going activities, their relevance and potential benefit to outer planet aerocapture that include New Millennium ST7 Aerocapture concept definition study, Mars Exploration Program aeroassist project level support, and FY01 Aeroassist In-Space Guideline tasks. The challenges of performing aerocapture for outer planet missions such as Titan Explorer or Neptune Orbiter require investments to advance the technology readiness of the aerocapture technology disciplines for the unique application of outer planet aerocapture. This white paper will identify critical technology gaps (with emphasis on aeroshell concepts) and strategies for advancement.

A Critical Evaluation of the Contribution of Trust to Effective Technology Enhanced Learning in the Workplace: A Literature Review

ERIC Educational Resources Information Center

Short, Heather

2014-01-01

This paper offers a critical review of the literature that explores the building and development of trust in workplace learning, particularly in a virtual context and its implications for Technology Enhanced Learning (TEL) in business. Trust is increasingly recognised as important in both business and education, and is the focus of increasing…

Design, System, Value: The Role of Problem-Solving and Critical Thinking Capabilities in Technology Education, as Perceived by Teachers

ERIC Educational Resources Information Center

Schooner, Patrick; Nordlöf, Charlotta; Klasander, Claes; Hallström, Jonas

2017-01-01

The Organisation for Economic Co-operation and Development (OECD, 2013) defines its views on necessary skills for 21st century citizenship and life-long learning, advocating a generic skillset of literacy, numeracy, and problem-solving in technology-rich environments. Other sources also include critical thinking as a vital 21st Century skill.…

National Algal Biofuels Technology Roadmap

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ferrell, John; Sarisky-Reed, Valerie

The framework for National Algal Biofuels Technology Roadmap was constructed at the Algal Biofuels Technology Roadmap Workshop, held December 9-10, 2008, at the University of Maryland-College Park. The Workshop was organized by the Biomass Program to discuss and identify the critical challenges currently hindering the development of a domestic, commercial-scale algal biofuels industry. This Roadmap presents information from a scientific, economic, and policy perspectives that can support and guide RD&D investment in algal biofuels. While addressing the potential economic and environmental benefits of using algal biomass for the production of liquid transportation fuels, the Roadmap describes the current status ofmore » algae RD&D. In doing so, it lays the groundwork for identifying challenges that likely need to be overcome for algal biomass to be used in the production of economically viable biofuels.« less

Hydrogen energy systems technology study

NASA Technical Reports Server (NTRS)

Kelley, J. H.

1975-01-01

The paper discusses the objectives of a hydrogen energy systems technology study directed toward determining future demand for hydrogen based on current trends and anticipated new uses and identifying the critical research and technology advancements required to meet this need with allowance for raw material limitations, economics, and environmental effects. Attention is focused on historic production and use of hydrogen, scenarios used as a basis for projections, projections of energy sources and uses, supply options, and technology requirements and needs. The study found more than a billion dollar annual usage of hydrogen, dominated by chemical-industry needs, supplied mostly from natural gas and petroleum feedstocks. Evaluation of the progress in developing nuclear fusion and solar energy sources relative to hydrogen production will be necessary to direct the pace and character of research and technology work in the advanced water-splitting areas.

Using Mobile Technology in an Urban High School to Decrease Adult Prompting during in School Transitions for Students Identified with Intellectual Disabilities

ERIC Educational Resources Information Center

Christman, Jennifer T.

2013-01-01

The aim of this study was to examine the application of video modeling on mobile technology to increase efficiency in the classroom for students identified with intellectual disabilities. Specially, this study sought to identify if video modeling on mobile technology could decrease adult prompting for students with intellectual disabilities during…

Reusable launch vehicle: Technology development and test program

NASA Technical Reports Server (NTRS)

1995-01-01

The National Aeronautics and Space Administration (NASA) requested that the National Research Council (NRC) assess the Reusable Launch Vehicle (RLV) technology development and test programs in the most critical component technologies. At a time when discretionary government spending is under close scrutiny, the RLV program is designed to reduce the cost of access to space through a combination of robust vehicles and a streamlined infrastructure. Routine access to space has obvious benefits for space science, national security, commercial technologies, and the further exploration of space. Because of technological challenges, knowledgeable people disagree about the feasibility of a single-stage-to-orbit (SSTO) vehicle. The purpose of the RLV program proposed by NASA and industry contractors is to investigate the status of existing technology and to identify and advance key technology areas required for development and validation of an SSTO vehicle. This report does not address the feasibility of an SSTO vehicle, nor does it revisit the roles and responsibilities assigned to NASA by the National Transportation Policy. Instead, the report sets forth the NRC committee's findings and recommendations regarding the RLV technology development and test program in the critical areas of propulsion, a reusable cryogenic tank system (RCTS), primary vehicle structure, and a thermal protection system (TPS).

Identifying Potential Implications of Technologies on Military and Security Options

DTIC Science & Technology

2006-06-01

Technology Readiness Level (TRL) ratings. THE DISCUSSION Technology surprise occurs through the use of rapidly-emerging and disruptive technologies by...NATO RTB Systems Analysis and Studies Panel, Exploratory Team on the Impact of Disruptive Technologies The objectives of this task group (TG...Workshop on Emerging Disruptive Technologies and the Implications for Defence advanced the view that TTCP should examine the potential of emerging

Applying deep learning technology to automatically identify metaphase chromosomes using scanning microscopic images: an initial investigation

NASA Astrophysics Data System (ADS)

Qiu, Yuchen; Lu, Xianglan; Yan, Shiju; Tan, Maxine; Cheng, Samuel; Li, Shibo; Liu, Hong; Zheng, Bin

2016-03-01

Automated high throughput scanning microscopy is a fast developing screening technology used in cytogenetic laboratories for the diagnosis of leukemia or other genetic diseases. However, one of the major challenges of using this new technology is how to efficiently detect the analyzable metaphase chromosomes during the scanning process. The purpose of this investigation is to develop a computer aided detection (CAD) scheme based on deep learning technology, which can identify the metaphase chromosomes with high accuracy. The CAD scheme includes an eight layer neural network. The first six layers compose of an automatic feature extraction module, which has an architecture of three convolution-max-pooling layer pairs. The 1st, 2nd and 3rd pair contains 30, 20, 20 feature maps, respectively. The seventh and eighth layers compose of a multiple layer perception (MLP) based classifier, which is used to identify the analyzable metaphase chromosomes. The performance of new CAD scheme was assessed by receiver operation characteristic (ROC) method. A number of 150 regions of interest (ROIs) were selected to test the performance of our new CAD scheme. Each ROI contains either interphase cell or metaphase chromosomes. The results indicate that new scheme is able to achieve an area under the ROC curve (AUC) of 0.886+/-0.043. This investigation demonstrates that applying a deep learning technique may enable to significantly improve the accuracy of the metaphase chromosome detection using a scanning microscopic imaging technology in the future.

International Space Exploration Coordination Group Assessment of Technology Gaps for Dust Mitigation for the Global Exploration Roadmap

NASA Technical Reports Server (NTRS)

Gaier, James R.; Vangen, Scott; Abel, Phil; Agui, Juan; Buffington, Jesse; Calle, Carlos; Mary, Natalie; Smith, Jonathan Drew; Straka, Sharon; Mugnuolo, Raffaele;

Advanced Reactor Technologies - Regulatory Technology Development Plan (RTDP)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moe, Wayne L.

This DOE-NE Advanced Small Modular Reactor (AdvSMR) regulatory technology development plan (RTDP) will link critical DOE nuclear reactor technology development programs to important regulatory and policy-related issues likely to impact a “critical path” for establishing a viable commercial AdvSMR presence in the domestic energy market. Accordingly, the regulatory considerations that are set forth in the AdvSMR RTDP will not be limited to any one particular type or subset of advanced reactor technology(s) but rather broadly consider potential regulatory approaches and the licensing implications that accompany all DOE-sponsored research and technology development activity that deal with commercial non-light water reactors. However,more » it is also important to remember that certain “minimum” levels of design and safety approach knowledge concerning these technology(s) must be defined and available to an extent that supports appropriate pre-licensing regulatory analysis within the RTDP. Final resolution to advanced reactor licensing issues is most often predicated on the detailed design information and specific safety approach as documented in a facility license application and submitted for licensing review. Because the AdvSMR RTDP is focused on identifying and assessing the potential regulatory implications of DOE-sponsored reactor technology research very early in the pre-license application development phase, the information necessary to support a comprehensive regulatory analysis of a new reactor technology, and the resolution of resulting issues, will generally not be available. As such, the regulatory considerations documented in the RTDP should be considered an initial “first step” in the licensing process which will continue until a license is issued to build and operate the said nuclear facility. Because a facility license application relies heavily on the data and information generated by technology development studies, the anticipated

Advanced Reactor Technology -- Regulatory Technology Development Plan (RTDP)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moe, Wayne Leland

This DOE-NE Advanced Small Modular Reactor (AdvSMR) regulatory technology development plan (RTDP) will link critical DOE nuclear reactor technology development programs to important regulatory and policy-related issues likely to impact a “critical path” for establishing a viable commercial AdvSMR presence in the domestic energy market. Accordingly, the regulatory considerations that are set forth in the AdvSMR RTDP will not be limited to any one particular type or subset of advanced reactor technology(s) but rather broadly consider potential regulatory approaches and the licensing implications that accompany all DOE-sponsored research and technology development activity that deal with commercial non-light water reactors. However,more » it is also important to remember that certain “minimum” levels of design and safety approach knowledge concerning these technology(s) must be defined and available to an extent that supports appropriate pre-licensing regulatory analysis within the RTDP. Final resolution to advanced reactor licensing issues is most often predicated on the detailed design information and specific safety approach as documented in a facility license application and submitted for licensing review. Because the AdvSMR RTDP is focused on identifying and assessing the potential regulatory implications of DOE-sponsored reactor technology research very early in the pre-license application development phase, the information necessary to support a comprehensive regulatory analysis of a new reactor technology, and the resolution of resulting issues, will generally not be available. As such, the regulatory considerations documented in the RTDP should be considered an initial “first step” in the licensing process which will continue until a license is issued to build and operate the said nuclear facility. Because a facility license application relies heavily on the data and information generated by technology development studies, the anticipated

The use of technology for urgent clinician to clinician communications: a systematic review of the literature.

PubMed

Nguyen, Cristina; McElroy, Lisa M; Abecassis, Michael M; Holl, Jane L; Ladner, Daniela P

2015-02-01

Urgent clinician-clinician communications require routes of contact that are fast and dependable, and allow for the exchange of complex information. Despite the increasing focus on improving healthcare delivery systems over the past decade, few studies have examined the role of technology in clinician-clinician communication. The aim of this study was to review the literature examining the role of devices and technology in facilitating urgent clinician-clinician communication to identify critical areas for future research. A search of Pub Med was performed using the terms (((("Critical Care"[Mesh] OR "urgent")))) AND (((hospital communication systems[MeSH Terms]) OR health communication[MeSH Terms]) OR interdisciplinary communication[MeSH Terms]). Commentaries and editorials were excluded. The initial search returned 272 articles, which were reviewed to identify articles describing: (1) the role of technological support or devices in clinician-clinician communication, (2) technology-based interventions that improved clinician-to-clinician communication in hospitals or acute care facilities related to critically ill patients, or (3) critical information exchange. A total of 16 articles were included in the final review. These were grouped into three categories: alphanumeric pagers, cellular and smart telephones, and novel uses of technology. Breakdowns in clinician-clinician communication are complex and cannot be solved through the implementation of devices or technologically advanced systems alone. It is essential to understand the correlation between emerging technologies, a demanding workload, and clinician-clinician interaction. Enhanced communication of clinical ideas, opportunities for team discussion, and a sense of partnership and support require not just increased information, but enhanced delivery. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Investigating the Impact of Maternal Residential Mobility on Identifying Critical Windows of Susceptibility to Ambient Air Pollution During Pregnancy.

PubMed

Warren, Joshua L; Son, Ji-Young; Pereira, Gavin; Leaderer, Brian P; Bell, Michelle L

2018-05-01

Identifying periods of increased vulnerability to air pollution during pregnancy with respect to the development of adverse birth outcomes can improve understanding of possible mechanisms of disease development and provide guidelines for protection of the child. Exposure to air pollution during pregnancy is typically based on the mother's residence at delivery, potentially resulting in exposure misclassification and biasing the estimation of critical windows of pregnancy. In this study, we determined the impact of maternal residential mobility during pregnancy on defining weekly exposure to particulate matter less than or equal to 10 μm in aerodynamic diameter (PM10) and estimating windows of susceptibility to term low birth weight. We utilized data sets from 4 Connecticut birth cohorts (1988-2008) that included information on all residential addresses between conception and delivery for each woman. We designed a simulation study to investigate the impact of increasing levels of mobility on identification of critical windows. Increased PM10 exposure during pregnancy weeks 16-18 was associated with an increased probability of term low birth weight. Ignoring residential mobility when defining weekly exposure had only a minor impact on the identification of critical windows for PM10 and term low birth weight in the data application and simulation study. Identification of critical pregnancy windows was robust to exposure misclassification caused by ignoring residential mobility in these Connecticut birth cohorts.

Decision support for redesigning wastewater treatment technologies.

PubMed

McConville, Jennifer R; Künzle, Rahel; Messmer, Ulrike; Udert, Kai M; Larsen, Tove A

2014-10-21

This paper offers a methodology for structuring the design space for innovative process engineering technology development. The methodology is exemplified in the evaluation of a wide variety of treatment technologies for source-separated domestic wastewater within the scope of the Reinvent the Toilet Challenge. It offers a methodology for narrowing down the decision-making field based on a strict interpretation of treatment objectives for undiluted urine and dry feces and macroenvironmental factors (STEEPLED analysis) which influence decision criteria. Such an evaluation identifies promising paths for technology development such as focusing on space-saving processes or the need for more innovation in low-cost, energy-efficient urine treatment methods. Critical macroenvironmental factors, such as housing density, transportation infrastructure, and climate conditions were found to affect technology decisions regarding reactor volume, weight of outputs, energy consumption, atmospheric emissions, investment cost, and net revenue. The analysis also identified a number of qualitative factors that should be carefully weighed when pursuing technology development; such as availability of O&M resources, health and safety goals, and other ethical issues. Use of this methodology allows for coevolution of innovative technology within context constraints; however, for full-scale technology choices in the field, only very mature technologies can be evaluated.

Technology Education Teacher Supply and Demand--A Critical Situation

ERIC Educational Resources Information Center

Moye, Johnny J.

2009-01-01

Technology education is an excellent format to integrate science, technology, engineering, and mathematics (STEM) studies by employing problem-based learning activities. However, the benefits of technology education are still generally "misunderstood by the public." The effects of technology education on increased student mathematics…

Evaluation of an inpatient fall risk screening tool to identify the most critical fall risk factors in inpatients.

PubMed

Hou, Wen-Hsuan; Kang, Chun-Mei; Ho, Mu-Hsing; Kuo, Jessie Ming-Chuan; Chen, Hsiao-Lien; Chang, Wen-Yin

2017-03-01

To evaluate the accuracy of the inpatient fall risk screening tool and to identify the most critical fall risk factors in inpatients. Variations exist in several screening tools applied in acute care hospitals for examining risk factors for falls and identifying high-risk inpatients. Secondary data analysis. A subset of inpatient data for the period from June 2011-June 2014 was extracted from the nursing information system and adverse event reporting system of an 818-bed teaching medical centre in Taipei. Data were analysed using descriptive statistics, receiver operating characteristic curve analysis and logistic regression analysis. During the study period, 205 fallers and 37,232 nonfallers were identified. The results revealed that the inpatient fall risk screening tool (cut-off point of ≥3) had a low sensitivity level (60%), satisfactory specificity (87%), a positive predictive value of 2·0% and a negative predictive value of 99%. The receiver operating characteristic curve analysis revealed an area under the curve of 0·805 (sensitivity, 71·8%; specificity, 78%). To increase the sensitivity values, the Youden index suggests at least 1·5 points to be the most suitable cut-off point for the inpatient fall risk screening tool. Multivariate logistic regression analysis revealed a considerably increased fall risk in patients with impaired balance and impaired elimination. The fall risk factor was also significantly associated with days of hospital stay and with admission to surgical wards. The findings can raise awareness about the two most critical risk factors for falls among future clinical nurses and other healthcare professionals and thus facilitate the development of fall prevention interventions. This study highlights the needs for redefining the cut-off points of the inpatient fall risk screening tool to effectively identify inpatients at a high risk of falls. Furthermore, inpatients with impaired balance and impaired elimination should be closely

Critical thinking: assessing the risks to the future security of supply of critical metals

NASA Astrophysics Data System (ADS)

Gunn, Gus

2015-04-01

Increasing world population, the spread of prosperity across the globe and the demands of new technologies have led to a revival of concerns about the availability of raw materials needed by society. Despite scare stories about resource depletion, physical exhaustion of minerals is considered to be unlikely. However, we do need to know which materials might be of concern so that we can develop strategies to secure adequate supplies and to mitigate the effects of supply disruption. This requirement has led to renewed interest in criticality, a term that is generally used to refer to metals and minerals of high economic importance that have a relatively high likelihood of supply disruption. The European Union (EU) developed a quantitative methodology for the assessment of criticality which led to the definition of 14 raw materials as critical to the EU economy (EC, 2010). This has succeeded in raising awareness of potential supply issues and in helping to prioritise requirements for new policies and supporting research. The EU has recently assessed a larger number of candidate materials of which 20 are now identified as critical to the EU (EC, 2014). These include metals such as indium, mostly used in flat-screen displays, antimony for flame retardants and cobalt for rechargeable batteries, alloys and a host of other products. Although there is no consensus on the methodology for criticality assessments and broad analyses at this scale are inevitably imperfect, they can, nevertheless, provide early warning of supply problems. However, in order to develop more rigorous and dynamic assessments of future availability detailed analysis of the whole life-cycle of individual metals to identify specific problems and develop appropriate solutions is required. New policies, such as the Raw Materials Initiative (2008) and the European Innovation Partnership on Raw Materials (2013), have been developed by the European Commission (EC) and are aimed at securing sustainable

Using the Technology of Critical Thinking Development (CTD) as a Means of Forming Competencies of Students Majoring in "Life Safety"

ERIC Educational Resources Information Center

Kayumova, Leysan R.; Morozova, Marina A.

2016-01-01

The relevance of the research problem is caused by the need to use various teaching methods and techniques in training students majoring in pedagogical specialties while implementing the competency approach in education. Information about the technology of critical thinking development (CTD) in future teachers training is limited, and the…

Teachers' Perceived Barriers to Technology Integration as Prescribed by 21st Century Learning Skills

ERIC Educational Resources Information Center

Young, Diane Killough

2012-01-01

Technology is a learning and teaching tool that enhances students' communication, innovation, and critical thinking skills, also known as 21st century learning goals. Successfully using technology in the classroom to promote these learning goals, however, has presented some challenges for teachers. While research has identified a variety of…

Biomedical technology prosperity game{trademark}

DOE Office of Scientific and Technical Information (OSTI.GOV)

Berman, M.; Boyack, K.W.; Wesenberg, D.L.

1996-07-01

Prosperity Games{trademark} are an outgrowth and adaptation of move/countermove and seminar War Games. Prosperity Games{trademark} are simulations that explore complex issues in a variety of areas including economics, politics, sociology, environment, education and research. These issues can be examined from a variety of perspectives ranging from a global, macroeconomic and geopolitical viewpoint down to the details of customer/supplier/market interactions in specific industries. All Prosperity Games{trademark} are unique in that both the game format and the player contributions vary from game to game. This report documents the Biomedical Technology Prosperity Game{trademark} conducted under the sponsorship of Sandia National Laboratories, the Defensemore » Advanced Research Projects Agency, and the Koop Foundation, Inc. Players were drawn from all stakeholders involved in biomedical technologies including patients, hospitals, doctors, insurance companies, legislators, suppliers/manufacturers, regulators, funding organizations, universities/laboratories, and the legal profession. The primary objectives of this game were to: (1) Identify advanced/critical technology issues that affect the cost and quality of health care. (2) Explore the development, patenting, manufacturing and licensing of needed technologies that would decrease costs while maintaining or improving quality. (3) Identify policy and regulatory changes that would reduce costs and improve quality and timeliness of health care delivery. (4) Identify and apply existing resources and facilities to develop and implement improved technologies and policies. (5) Begin to develop Biomedical Technology Roadmaps for industry and government cooperation. The deliberations and recommendations of these players provided valuable insights as to the views of this diverse group of decision makers concerning biomedical issues. Significant progress was made in the roadmapping of key areas in the biomedical technology

Strategic Management of Educational Technology--The Importance of Leadership and Management

ERIC Educational Resources Information Center

Moser, Franziska Zellweger

2007-01-01

Through case study research critical leadership and management tasks are identified regarding the integration of educational technology in teaching at research universities. The institutions studied, regardless their different characteristics and approaches, face common difficulties in engaging "second-wave" faculty. Furthermore, the coordination…

It's Not My Party: A Critical Analysis of Women and Minority Opposition towards STEM

ERIC Educational Resources Information Center

Martin, David C.

2016-01-01

The civil rights era promised an invitation for equity and equality in education was on its way. The invitation was lost in the mail or it is a party that the "marginalized" do not want to attend. In 2004, the National Science Board (NSB) identified a critical shortage of workers in Science, Technology, Engineering, and Mathematics…

Discontinuing treatment in children with chronic, critical illnesses.

PubMed

Mahon, M M; Deatrick, J A; McKnight, H J; Mohr, W K

2000-03-01

Decisions about optimal treatment for critically ill children are qualitatively different from those related to adults. Technological advances over the past several decades have resulted in myriad treatment options that leave many children chronically, critically ill. These children are often technology dependent. With new technologies and new patient populations comes the responsibility to understand how, when, and why these technologies are applied and when technology should not be used or should be withdrawn. Much has been written about ethical decision making in the care of chronically, critically ill adults and newborns. In this article, relevant factors about the care of children older than neonates are described: standards, decision makers, age of the child, and pain management. A case study is used as a mechanism to explore these issues. Dimensions of futility, discontinuing aggressive treatment, and a consideration of benefits and burdens are integrated throughout the discussion to inform nurse practitioner practice.

Higher education technological knowledge and patterns of technology adoptions in undergraduate STEM courses

NASA Astrophysics Data System (ADS)

Ali, Zarka Asghar

Identifying, examining, and understanding faculty members' technological knowledge development and the process of technology adoption in higher education is a multifaceted process. Past studies have used Rogers (1995, 2003) diffusion of innovation theoretical framework to delineate the technology adoption process. These studies, however, have frequently reported the influencing factors based on the statistical analysis such as regression analysis-based approach, and have not focused on the emerging process of technology adoptions or the developing process of technological knowledge and pedagogical knowledge. A mixed method study was designed to see how faculty members acquire different technologies and develop technological knowledge that might help them adopt technologies in their classrooms and online using different pedagogies. A sample of STEM teaching faculty members with different ranks, tenure, teaching experience, and varied degree of experience in the use of educational technologies participated in the study. A survey was designed to identify internal and external factors affecting technology adoption and its effective use in different teaching activities. To elaborate survey results, the study also included class observations as well as pre- and post-observation interviews. Online classrooms used by the faculty via Blackboard learning management system, online flipped classrooms, or other websites such as Piazza were also examined for data triangulation. The findings of the study indicate that faculty members are influenced by their own professional motivations and student learning to improve their teaching methods and to enhance student interactions and learning through the use of different educational technologies. The adoption process was identified as spreading over a period of time and it looked at how faculty members' developed their technological knowledge and pedagogical knowledge. With the recognition of the social, organizational, and

Telemedicine in Critical Care

PubMed Central

Murias, Gastón; Sales, Bernat; Garcia-Esquirol, Oscar; Blanch, Lluis

2009-01-01

Critical care medicine is the specialty that cares for patients with acute life-threatening illnesses where intensivists look after all aspects of patient care. Nevertheless, shortage of physicians and nurses, the relationship between high costs and economic restrictions, and the fact that critical care knowledge is only available at big hospitals puts the system on the edge. In this scenario, telemedicine might provide solutions to improve availability of critical care knowledge where the patient is located, improve relationship between attendants in different institutions and education material for future specialist training. Current information technologies and networking capabilities should be exploited to improve intensivist coverage, advanced alarm systems and to have large critical care databases of critical care signals. PMID:19452034

The Shared Decision Making Frontier: a Feasibility and Usability Study for Managing Non-Critical Chronic Illness by Combining Behavioural & Decision Theory with Online Technology.

PubMed

Russell, Amina; Van Woensel, William; Abidi, Samina Raza

2015-01-01

The objective of this study is to determine if shared decisions for managing non-critical chronic illness, made through an online biomedical technology intervention, us feasible and usable. The technology intervention incorporates behavioural and decision theories to increase patient engagement, and ultimately long term adherence to health behaviour change. We devised the iheart web intervention as a "proof of concept" in five phases. The implementation incorporates the Vaadin web application framework, Drools, EclipseLink and a MySQL database. Two-thirds of the study participants favoured the technology intervention, based on Likert-scale questions from a post-study questionnaire. Qualitative analysis of think aloud feedback, video screen captures and open-ended questions from the post-study questionnaire uncovered six main areas or themes for improvement. We conclude that online shared decisions for managing a non-critical chronic illness are feasible and usable through the iheart web intervention.

Man-machine interface requirements - advanced technology

NASA Technical Reports Server (NTRS)

Remington, R. W.; Wiener, E. L.

1984-01-01

Research issues and areas are identified where increased understanding of the human operator and the interaction between the operator and the avionics could lead to improvements in the performance of current and proposed helicopters. Both current and advanced helicopter systems and avionics are considered. Areas critical to man-machine interface requirements include: (1) artificial intelligence; (2) visual displays; (3) voice technology; (4) cockpit integration; and (5) pilot work loads and performance.

The development and technology transfer of software engineering technology at NASA. Johnson Space Center

NASA Technical Reports Server (NTRS)

Pitman, C. L.; Erb, D. M.; Izygon, M. E.; Fridge, E. M., III; Roush, G. B.; Braley, D. M.; Savely, R. T.

1992-01-01

The United State's big space projects of the next decades, such as Space Station and the Human Exploration Initiative, will need the development of many millions of lines of mission critical software. NASA-Johnson (JSC) is identifying and developing some of the Computer Aided Software Engineering (CASE) technology that NASA will need to build these future software systems. The goal is to improve the quality and the productivity of large software development projects. New trends are outlined in CASE technology and how the Software Technology Branch (STB) at JSC is endeavoring to provide some of these CASE solutions for NASA is described. Key software technology components include knowledge-based systems, software reusability, user interface technology, reengineering environments, management systems for the software development process, software cost models, repository technology, and open, integrated CASE environment frameworks. The paper presents the status and long-term expectations for CASE products. The STB's Reengineering Application Project (REAP), Advanced Software Development Workstation (ASDW) project, and software development cost model (COSTMODL) project are then discussed. Some of the general difficulties of technology transfer are introduced, and a process developed by STB for CASE technology insertion is described.

Off-highway vehicle technology roadmap.

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

2002-02-07

The off-highway sector is under increasing pressure to reduce operating costs (including fuel costs) and to reduce emissions. Recognizing this, the Society of Automotive Engineers and the U.S. Department of Energy (DOE) convened a workshop in April 2001 (ANL 2001) to (1) determine the interest of the off-highway sector (consisting of agriculture, construction, surface mining, inland marine) in crafting a shared vision of off-highway, heavy machines of the future and (2) identify critical research and development (R&D) needs for minimizing off-highway vehicle emissions while cost-effectively maintaining or enhancing system performance. The workshop also enabled government and industry participants to exchangemore » information. During the workshop, it became clear that the challenges facing the heavy, surface-based off-highway sector can be addressed in three major machine categories: (1) engine/aftertreatment and fuels/lubes, (2) machine systems, and (3) thermal management. Working groups convened to address these topical areas. The status of off-highway technologies was determined, critical technical barriers to achieving future emission standards were identified, and strategies and technologies for reducing fuel consumption were discussed. Priority areas for R&D were identified. Given the apparent success of the discussions at the workshop, several participants from industry agreed to help in the formation of a joint industry/government ''roadmap'' team. The U.S. Department of Energy's Office of Heavy Vehicle Technologies has an extensive role in researching ways to make heavy-duty trucks and trains more efficient, with respect to both fuel usage and air emissions. The workshop participants felt that a joint industry/government research program that addresses the unique needs of the off-highway sector would complement the current research program for highway vehicles. With industry expertise, in-kind contributions, and federal government funding (coupled with

Positive technology: using interactive technologies to promote positive functioning.

PubMed

Riva, Giuseppe; Baños, Rosa M; Botella, Cristina; Wiederhold, Brenda K; Gaggioli, Andrea

2012-02-01

It is generally assumed that technology assists individuals in improving the quality of their lives. However, the impact of new technologies and media on well-being and positive functioning is still somewhat controversial. In this paper, we contend that the quality of experience should become the guiding principle in the design and development of new technologies, as well as a primary metric for the evaluation of their applications. The emerging discipline of Positive Psychology provides a useful framework to address this challenge. Positive Psychology is the scientific study of optimal human functioning and flourishing. Instead of drawing on a "disease model" of human behavior, it focuses on factors that enable individuals and communities to thrive and build the best in life. In this paper, we propose the "Positive Technology" approach--the scientific and applied approach to the use of technology for improving the quality of our personal experience through its structuring, augmentation, and/or replacement--as a way of framing a suitable object of study in the field of cyberpsychology and human-computer interaction. Specifically, we suggest that it is possible to use technology to influence three specific features of our experience--affective quality, engagement/actualization, and connectedness--that serve to promote adaptive behaviors and positive functioning. In this framework, positive technologies are classified according to their effects on a specific feature of personal experience. Moreover, for each level, we have identified critical variables that can be manipulated to guide the design and development of positive technologies.

Exposure Potential and Health Impacts of Indium and Gallium, Metals Critical to Emerging Electronics and Energy Technologies.

PubMed

White, Sarah Jane O; Shine, James P

2016-12-01

The rapid growth of new electronics and energy technologies requires the use of rare elements of the periodic table. For many of these elements, little is known about their environmental behavior or human health impacts. This is true for indium and gallium, two technology critical elements. Increased environmental concentrations of both indium and gallium create the potential for increased environmental exposure, though little is known about the extent of this exposure. Evidence is mounting that indium and gallium can have substantial toxicity, including in occupational settings where indium lung disease has been recognized as a potentially fatal disease caused by the inhalation of indium particles. This paper aims to review the basic chemistry, changing environmental concentrations, potential for human exposure, and known health effects of indium and gallium.

Using statistical text classification to identify health information technology incidents

PubMed Central

Chai, Kevin E K; Anthony, Stephen; Coiera, Enrico; Magrabi, Farah

2013-01-01

Objective To examine the feasibility of using statistical text classification to automatically identify health information technology (HIT) incidents in the USA Food and Drug Administration (FDA) Manufacturer and User Facility Device Experience (MAUDE) database. Design We used a subset of 570 272 incidents including 1534 HIT incidents reported to MAUDE between 1 January 2008 and 1 July 2010. Text classifiers using regularized logistic regression were evaluated with both ‘balanced’ (50% HIT) and ‘stratified’ (0.297% HIT) datasets for training, validation, and testing. Dataset preparation, feature extraction, feature selection, cross-validation, classification, performance evaluation, and error analysis were performed iteratively to further improve the classifiers. Feature-selection techniques such as removing short words and stop words, stemming, lemmatization, and principal component analysis were examined. Measurements κ statistic, F1 score, precision and recall. Results Classification performance was similar on both the stratified (0.954 F1 score) and balanced (0.995 F1 score) datasets. Stemming was the most effective technique, reducing the feature set size to 79% while maintaining comparable performance. Training with balanced datasets improved recall (0.989) but reduced precision (0.165). Conclusions Statistical text classification appears to be a feasible method for identifying HIT reports within large databases of incidents. Automated identification should enable more HIT problems to be detected, analyzed, and addressed in a timely manner. Semi-supervised learning may be necessary when applying machine learning to big data analysis of patient safety incidents and requires further investigation. PMID:23666777

The Mars Technology Program

NASA Technical Reports Server (NTRS)

Hayati, Samad A.

2002-01-01

Future Mars missions require new capabilities that currently are not available. The Mars Technology Program (MTP) is an integral part of the Mars Exploration Program (MEP). Its sole purpose is to assure that required technologies are developed in time to enable the baselined and future missions. The MTP is a NASA-wide technology development program managed by JPL. It is divided into a Focused Program and a Base Program. The Focused Program is tightly tied to the proposed Mars Program mission milestones. It involves time-critical deliverables that must be developed in time for infusion into the proposed Mars 2005, and, 2009 missions. In addition a technology demonstration mission by AFRL will test a LIDAR as part of a joint NASNAFRL experiment. This program bridges the gap between technology and projects by vertically integrating the technology work with pre-project development in a project-like environment with critical dates for technology infusion. A Base Technology Program attacks higher riskhigher payoff technologies not in the critical path of missions.

Pedagogical Beliefs and Attitudes toward Information and Communication Technology: A Survey of Teachers of English as a Foreign Language in China

ERIC Educational Resources Information Center

Liu, Haixia; Lin, Chin-Hsi; Zhang, Dongbo

2017-01-01

Though pedagogical beliefs have been identified as critical factors in the success of technology integration, very few studies have included them in technology-adoption models. The present study revises the Technology Acceptance Model (TAM) by adding teachers' pedagogical beliefs, and tests the revised model among university-level…

Virtual Reality and Its Potential Use in Special Education. Identifying Emerging Issues and Trends in Technology for Special Education.

ERIC Educational Resources Information Center

Woodward, John

As part of a 3-year study to identify emerging issues and trends in technology for special education, this paper addresses the possible contributions of virtual reality technology to educational services for students with disabilities. An example of the use of virtual reality in medical imaging introduces the paper and leads to a brief review of…

Identifying and Nurturing Future Innovators in Science, Technology, Engineering, and Mathematics: A Review of Findings from the Study of Mathematically Precocious Youth

ERIC Educational Resources Information Center

Benbow, Camilla Persson

2012-01-01

Calls to strengthen education in science, technology, engineering, and mathematics (STEM) are underscored by employment trends and the importance of STEM innovation for the economy. The Study of Mathematically Precocious Youth (SMPY) has been tracking over 5,000 talented individuals longitudinally for 40 years, throwing light on critical questions…

Physician satisfaction with a critical care clinical information system using a multimethod evaluation of usability.

PubMed

Hudson, Darren; Kushniruk, Andre; Borycki, Elizabeth; Zuege, Danny J

2018-04-01

Physician satisfaction with electronic medical records has often been poor. Usability has frequently been identified as a source for decreased satisfaction. While surveys can identify many issues, and are logistically easier to administer, they may miss issues identified using other methods This study sought to understand the level of physician satisfaction and usability issues associated with a critical care clinical information system (eCritical Alberta) implemented throughout the province of Alberta, Canada. All critical care attending physicians using the system were invited to participate in an online survey. Questions included components of the User Acceptance of Information Technology and Usability Questionnaire as well as free text feedback on system components. Physicians were also invited to participate in a think aloud test using simulated scenarios. The transcribed think aloud text and questionnaire were subjected to textual analysis. 82% of all eligible physicians completed the on-line survey (n = 61). Eight physicians were invited and seven completed the think aloud test. Overall satisfaction with the system was moderate. Usability was identified as a significant factor contributing to satisfaction. The major usability factors identified were system response time and layout. The think aloud component identified additional factors beyond those identified in the on-line survey. This study found a modestly high level of physician satisfaction with a province-wide clinical critical care information system. Usability continues to be a significant factor in physician satisfaction. Using multiple methods of evaluation can capture the benefits of a large sample size and deeper understanding of the issues. Copyright © 2018 Elsevier B.V. All rights reserved.

Perspectives of physicians and nurses on identifying and treating psychological distress of the critically ill.

PubMed

Karnatovskaia, Lioudmila V; Johnson, Margaret M; Dockter, Travis J; Gajic, Ognjen

2017-02-01

Survivors of critical illness are frequently unable to return to their premorbid level of psychocognitive functioning following discharge. Therefore, we aimed to evaluate the burden of psychological trauma experienced by patients in the intensive care unit (ICU) as perceived by clinicians to assess factors that can impede its recognition and treatment in the ICU. Two distinct role-specific Web-based surveys were administered to critical care physicians and nurses in medical and surgical ICUs of 2 academic medical centers. Responses were analyzed in the domains of psychological trauma, exacerbating/mitigating factors, and provider-patient communication. A survey was completed by 43 physicians and 55 nurses with a response rate of 62% and 37%, respectively. Among physicians, 65% consistently consider the psychological state of the patient in decision making; 77% think it is important to introduce a system to document psychological state of ICU patients; 56% would like to have more time to communicate with patients; 77% consistently spend extra time at bedside besides rounds and often hold patient's hand/reassure them. Notably, for the question about the average level of psychological stress experienced by a patient in the ICU (with 0=no stress and 100=worst stress imaginable) during initial treatment stage and by the end of the ICU stay, median assessment by both physicians and nurses was 80 for the initial stress level and 68 for the stress level by the end of the ICU stay. Among nurses, 69% always try to minimize noise and 73% actively promote patient's rest. Physicians and nurses provided multiple specific suggestions for improving ICU environment and communication. Both physicians and nurses acknowledge that they perceive that critically ill patients experience a high level of psychological stress that persists throughout their period of illness. Improved understanding of this phenomenon is needed to design effective therapeutic interventions. Although the lack

New technology planning and approval: critical factors for success.

PubMed

Haselkorn, Ateret; Rosenstein, Alan H; Rao, Anil K; Van Zuiden, Michele; Coye, Molly J

2007-01-01

The steady evolution of technology, with the associated increased costs, is a major factor affecting health care delivery. In the face of limited capital resources, it is important for hospitals to integrate technology management with the strategic plan, mission, and resource availability of the organization. Experiences in technology management have shown that having a well-organized, consistent approach to technology planning, assessment, committee membership, approval, evaluation, implementation, and monitoring are key factors necessary to ensure a successful program. We examined the results of a survey that assessed the structure, processes, and cultural support behind hospital committees for new technology planning and approval.

Identification of Technologies for Provision of Future Aeronautical Communications

NASA Technical Reports Server (NTRS)

Gilbert, Tricia; Dyer, Glen; Henriksen, Steve; Berger, Jason; Jin, Jenny; Boci, Tony

2006-01-01

This report describes the process, findings, and recommendations of the second of three phases of the Future Communications Study (FCS) technology investigation conducted by NASA Glenn Research Center and ITT Advanced Engineering & Sciences Division for the Federal Aviation Administration (FAA). The FCS is a collaborative research effort between the FAA and Eurocontrol to address frequency congestion and spectrum depletion for safety critical airground communications. The goal of the technology investigation is to identify technologies that can support the longterm aeronautical mobile communication operating concept. A derived set of evaluation criteria traceable to the operating concept document is presented. An adaptation of the analytical hierarchy process is described and recommended for selecting candidates for detailed evaluation. Evaluations of a subset of technologies brought forward from the prescreening process are provided. Five of those are identified as candidates with the highest potential for continental airspace solutions in L-band (P-34, W-CDMA, LDL, B-VHF, and E-TDMA). Additional technologies are identified as best performers in the unique environments of remote/oceanic airspace in the satellite bands (Inmarsat SBB and a custom satellite solution) and the airport flight domain in C-band (802.16e). Details of the evaluation criteria, channel models, and the technology evaluations are provided in appendixes.

Emerging desalination technologies for water treatment: a critical review.

PubMed

Subramani, Arun; Jacangelo, Joseph G

2015-05-15

In this paper, a review of emerging desalination technologies is presented. Several technologies for desalination of municipal and industrial wastewater have been proposed and evaluated, but only certain technologies have been commercialized or are close to commercialization. This review consists of membrane-based, thermal-based and alternative technologies. Membranes based on incorporation of nanoparticles, carbon nanotubes or graphene-based ones show promise as innovative desalination technologies with superior performance in terms of water permeability and salt rejection. However, only nanocomposite membranes have been commercialized while others are still under fundamental developmental stages. Among the thermal-based technologies, membrane distillation and adsorption desalination show the most promise for enhanced performance with the availability of a waste heat source. Several alternative technologies have also been developed recently; those based on capacitive deionization have shown considerable improvements in their salt removal capacity and feed water recovery. In the same category, microbial desalination cells have been shown to desalinate high salinity water without any external energy source, but to date, scale up of the process has not been methodically evaluated. In this paper, advantages and drawbacks of each technology is discussed along with a comparison of performance, water quality and energy consumption. Copyright © 2015 Elsevier Ltd. All rights reserved.

Identifying Interdisciplinary Research Collaboration in Instructional Technology

ERIC Educational Resources Information Center

Cho, Yonjoo

2017-01-01

Interdisciplinarity is defined as communication and collaboration across academic disciplines. The instructional technology (IT) field has claimed to have an interdisciplinary nature influenced by neighboring fields such as psychology, communication, and management. However, it has been difficult to find outstanding evidence of the field's…

Technological advances for interrogating the human kinome.

PubMed

Baharani, Akanksha; Trost, Brett; Kusalik, Anthony; Napper, Scott

2017-02-08

There is increasing appreciation among researchers and clinicians of the value of investigating biology and pathobiology at the level of cellular kinase (kinome) activity. Kinome analysis provides valuable opportunity to gain insights into complex biology (including disease pathology), identify biomarkers of critical phenotypes (including disease prognosis and evaluation of therapeutic efficacy), and identify targets for therapeutic intervention through kinase inhibitors. The growing interest in kinome analysis has fueled efforts to develop and optimize technologies that enable characterization of phosphorylation-mediated signaling events in a cost-effective, high-throughput manner. In this review, we highlight recent advances to the central technologies currently available for kinome profiling and offer our perspectives on the key challenges remaining to be addressed. © 2017 The Author(s); published by Portland Press Limited on behalf of the Biochemical Society.

Advanced Air Bag Technology Assessment

NASA Technical Reports Server (NTRS)

Phen, R. L.; Dowdy, M. W.; Ebbeler, D. H.; Kim. E.-H.; Moore, N. R.; VanZandt, T. R.

1998-01-01

As a result of the concern for the growing number of air-bag-induced injuries and fatalities, the administrators of the National Highway Traffic Safety Administration (NHTSA) and the National Aeronautics and Space Administration (NASA) agreed to a cooperative effort that "leverages NHTSA's expertise in motor vehicle safety restraint systems and biomechanics with NASAs position as one of the leaders in advanced technology development... to enable the state of air bag safety technology to advance at a faster pace..." They signed a NASA/NHTSA memorandum of understanding for NASA to "evaluate air bag to assess advanced air bag performance, establish the technological potential for improved technology (smart) air bag systems, and identify key expertise and technology within the agency (i.e., NASA) that can potentially contribute significantly to the improved effectiveness of air bags." NASA is committed to contributing to NHTSAs effort to: (1) understand and define critical parameters affecting air bag performance; (2) systematically assess air bag technology state of the art and its future potential; and (3) identify new concepts for air bag systems. The Jet Propulsion Laboratory (JPL) was selected by NASA to respond to the memorandum of understanding by conducting an advanced air bag technology assessment. JPL analyzed the nature of the need for occupant restraint, how air bags operate alone and with safety belts to provide restraint, and the potential hazards introduced by the technology. This analysis yielded a set of critical parameters for restraint systems. The researchers examined data on the performance of current air bag technology, and searched for and assessed how new technologies could reduce the hazards introduced by air bags while providing the restraint protection that is their primary purpose. The critical parameters which were derived are: (1) the crash severity; (2) the use of seat belts; (3) the physical characteristics of the occupants; (4) the

Technological aspects of hospital communication challenges: an observational study.

PubMed

Popovici, Ilinca; Morita, Plinio P; Doran, Diane; Lapinsky, Stephen; Morra, Dante; Shier, Ashleigh; Wu, Robert; Cafazzo, Joseph A

2015-06-01

To gain insights into how technological communication tools impact effective communication among clinicians, which is critical for patient safety. This multi-site observational study analyzes inter-clinician communication and interaction with information technology, with a focus on the critical process of patient transfer from the Emergency Department to General Internal Medicine. Mount Sinai Hospital, Sunnybrook Health Sciences Centre and Toronto General Hospital. At least five ED and general internal medicine nurses and physicians directly involved in patient transfers were observed on separate occasions at each institution. N/A. N/A. The study provides insight into clinician workflow, evaluates current hospital communication systems and identifies key issues affecting communication: interruptions, issues with numeric pagers, lack of integrated communication tools, lack of awareness of consultation status, inefficiencies related to the paper chart, unintuitive user interfaces, mixed use of electronic and paper systems and lack of up-to-date contact information. It also identifies design trade-offs to be negotiated: synchronous communication vs. reducing interruptions, notification of patient status vs. reducing interruptions and speed vs. quality of handovers. The issues listed should be considered in the design of new technology for hospital communications. © The Author 2015. Published by Oxford University Press in association with the International Society for Quality in Health Care; all rights reserved.

The Anatomy of Critical Discourse.

ERIC Educational Resources Information Center

Rosenfield, Lawrence W.

1968-01-01

Critical discourse is best understood when its logical features are identified. An examination of the basic elements and modes of rhetorical criticism (a form of critical discourse) produces a finite set of options for the critic, thus enabling him to develop a system of alternatives in his critical efforts. For example, by selecting from among…

Science & Technology Review January/February 2010

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bearinger, J P

2009-11-30

This month's issue has the following articles: (1) Innovative Materials Rise to the Radiation Challenge - Commentary by Bruce Warner; (2) The Hunt for Better Radiation Detection - New materials will help radiation detectors pick up weak signals and accurately identify illicit radioactive sources; (3) Time-Critical Technology Identifies Deadly Bloodborne Pathogens - A portable device can simultaneously distinguish up to five bloodborne pathogens in just minutes; (4) Defending Computer Networks against Attack - A Laboratory effort takes a new approach to detecting increasingly sophisticated cyber attacks; and (5) Imaging Cargo's Inner Secrets - Livermore-University of California collaborators are modeling amore » new radiographic technique for identifying nuclear materials concealed inside cargo containers.« less

Model of areas for identifying risks influencing the compliance of technological processes and products

NASA Astrophysics Data System (ADS)

Misztal, A.; Belu, N.

2016-08-01

Operation of every company is associated with the risk of interfering with proper performance of its fundamental processes. This risk is associated with various internal areas of the company, as well as the environment in which it operates. From the point of view of ensuring compliance of the course of specific technological processes and, consequently, product conformity with requirements, it is important to identify these threats and eliminate or reduce the risk of their occurrence. The purpose of this article is to present a model of areas of identifying risk affecting the compliance of processes and products, which is based on multiregional targeted monitoring of typical places of interference and risk management methods. The model is based on the verification of risk analyses carried out in small and medium-sized manufacturing companies in various industries..

Space Technology for the New Century

NASA Technical Reports Server (NTRS)

1998-01-01

The National Aeronautics and Space Administration (NASA) is responsible for developing advanced space technologies that will lower the cost and improve the performance of existing space activities and enable new ones. Although NASA has recently proved adept at incorporating modern technologies into its spacecraft, the agency currently supports relatively little work in long-term space technology development. To enable ambitious future space activities and to achieve its long-term goals, NASA needs to engage in space research and technology development (R&T) in critical areas for the long term. NASA requested that the National Research Council (NRC) examine the nation's space technology needs in the post-2000 time frame and identify high-risk, high-payoff technology that could improve the capabilities and reduce the costs fo NASA, other government, and commercial space programs. The NRC was also asked to suggest how NASA can work more effectively with industry and universities to develop these technologies. To accomplish these ends, the Committee on Advanced Space Technology, under the auspices of the Aeronautics and Space Engineering Board, undertook a systematic process of information gathering and technology assessment. Six key technologies that the committee believes NASA should support are presented.

Identifying and Synchronizing Health Information Technology (HIT) Events from FDA Medical Device Reports.

PubMed

Kang, Hong; Wang, Frank; Zhou, Sicheng; Miao, Qi; Gong, Yang

2017-01-01

Health information technology (HIT) events, a subtype of patient safety events, pose a major threat and barrier toward a safer healthcare system. It is crucial to gain a better understanding of the nature of the errors and adverse events caused by current HIT systems. The scarcity of HIT event-exclusive databases and event reporting systems indicates the challenge of identifying the HIT events from existing resources. FDA Manufacturer and User Facility Device Experience (MAUDE) database is a potential resource for HIT events. However, the low proportion and the rapid evolvement of HIT-related events present challenges for distinguishing them from other equipment failures and hazards. We proposed a strategy to identify and synchronize HIT events from MAUDE by using a filter based on structured features and classifiers based on unstructured features. The strategy will help us develop and grow an HIT event-exclusive database, keeping pace with updates to MAUDE toward shared learning.

Beta Atomic Contacts: Identifying Critical Specific Contacts in Protein Binding Interfaces

PubMed Central

Liu, Qian; Kwoh, Chee Keong; Hoi, Steven C. H.

2013-01-01

Specific binding between proteins plays a crucial role in molecular functions and biological processes. Protein binding interfaces and their atomic contacts are typically defined by simple criteria, such as distance-based definitions that only use some threshold of spatial distance in previous studies. These definitions neglect the nearby atomic organization of contact atoms, and thus detect predominant contacts which are interrupted by other atoms. It is questionable whether such kinds of interrupted contacts are as important as other contacts in protein binding. To tackle this challenge, we propose a new definition called beta (β) atomic contacts. Our definition, founded on the β-skeletons in computational geometry, requires that there is no other atom in the contact spheres defined by two contact atoms; this sphere is similar to the van der Waals spheres of atoms. The statistical analysis on a large dataset shows that β contacts are only a small fraction of conventional distance-based contacts. To empirically quantify the importance of β contacts, we design βACV, an SVM classifier with β contacts as input, to classify homodimers from crystal packing. We found that our βACV is able to achieve the state-of-the-art classification performance superior to SVM classifiers with distance-based contacts as input. Our βACV also outperforms several existing methods when being evaluated on several datasets in previous works. The promising empirical performance suggests that β contacts can truly identify critical specific contacts in protein binding interfaces. β contacts thus provide a new model for more precise description of atomic organization in protein quaternary structures than distance-based contacts. PMID:23630569

Critical differences between elective and emergency surgery: identifying domains for quality improvement in emergency general surgery.

PubMed

Columbus, Alexandra B; Morris, Megan A; Lilley, Elizabeth J; Harlow, Alyssa F; Haider, Adil H; Salim, Ali; Havens, Joaquim M

2018-04-01

The objective of our study was to characterize providers' impressions of factors contributing to disproportionate rates of morbidity and mortality in emergency general surgery to identify targets for care quality improvement. Emergency general surgery is characterized by a high-cost burden and disproportionate morbidity and mortality. Factors contributing to these observed disparities are not comprehensively understood and targets for quality improvement have not been formally developed. Using a grounded theory approach, emergency general surgery providers were recruited through purposive-criterion-based sampling to participate in semi-structured interviews and focus groups. Participants were asked to identify contributors to emergency general surgery outcomes, to define effective care for EGS patients, and to describe operating room team structure. Interviews were performed to thematic saturation. Transcripts were iteratively coded and analyzed within and across cases to identify emergent themes. Member checking was performed to establish credibility of the findings. A total of 40 participants from 5 academic hospitals participated in either individual interviews (n = 25 [9 anesthesia, 12 surgery, 4 nursing]) or focus groups (n = 2 [15 nursing]). Emergency general surgery was characterized by an exceptionally high level of variability, which can be subcategorized as patient-variability (acute physiology and comorbidities) and system-variability (operating room resources and workforce). Multidisciplinary communication is identified as a modifier to variability in emergency general surgery; however, nursing is often left out of early communication exchanges. Critical variability in emergency general surgery may impact outcomes. Patient-variability and system-variability, with focus on multidisciplinary communication, represent potential domains for quality improvement in this field. Copyright © 2017 Elsevier Inc. All rights reserved.

NASA's Space Research and Technology Program. Report of a workshop

NASA Technical Reports Server (NTRS)

1983-01-01

The status of the spacecraft and subsystem industry and the civil and military uses of space were examined. Genetic and specific enabling technologies were identified. It was found that U.S. spacecraft manufacturers support civil and commercial uses, the military and NASA and, in turn, are supported by subsystem suppliers. However, no single spacecraft program carries sufficient resources to develop advanced critical subsystem technologies and increasingly, U.S. suppliers are facing strong competition from foreign industry that is government subsidized.

What’s My Lane? Identifying the State Government Role in Critical Infrastructure Protection

DTIC Science & Technology

2012-03-01

lacking. Dr. Bellavita makes an important point that “the initial difference between critical infrastructure and plain vanilla infrastructure seems to...more definitive description of “critical” would help to improve understanding of what infrastructure is critical and help to segregate “ vanilla ” or

Thoughts on "Virtual Education." Virtual Reality vs. Real Experience: Critical Thinking and Outdoor Education. Technology and the Influence of American Culture.

ERIC Educational Resources Information Center

Schatz, Curt; Schaefer, Susan

1997-01-01

A finding that environmental educators are eager to accept Virtual Reality (VR) as a teaching tool prompts two responses: one claims that students cannot critically analyze VR information to determine what is relevant because the VR programmer has already done that; the other points out that corporate propaganda taints the technology and that…

Technology adoption and prediction tools for everyday technologies aimed at people with dementia.

PubMed

Chaurasia, Priyanka; McClean, Sally I; Nugent, Chris D; Cleland, Ian; Shuai Zhang; Donnelly, Mark P; Scotney, Bryan W; Sanders, Chelsea; Smith, Ken; Norton, Maria C; Tschanz, JoAnn

2016-08-01

A wide range of assistive technologies have been developed to support the elderly population with the goal of promoting independent living. The adoption of these technology based solutions is, however, critical to their overarching success. In our previous research we addressed the significance of modelling user adoption to reminding technologies based on a range of physical, environmental and social factors. In our current work we build upon our initial modeling through considering a wider range of computational approaches and identify a reduced set of relevant features that can aid the medical professionals to make an informed choice of whether to recommend the technology or not. The adoption models produced were evaluated on a multi-criterion basis: in terms of prediction performance, robustness and bias in relation to two types of errors. The effects of data imbalance on prediction performance was also considered. With handling the imbalance in the dataset, a 16 feature-subset was evaluated consisting of 173 instances, resulting in the ability to differentiate between adopters and non-adopters with an overall accuracy of 99.42 %.

Ab initio thermodynamic approach to identify mixed solid sorbents for CO 2 capture technology

DOE PAGES

Duan, Yuhua

2015-10-15

Because the current technologies for capturing CO 2 are still too energy intensive, new materials must be developed that can capture CO 2 reversibly with acceptable energy costs. At a given CO 2 pressure, the turnover temperature (T t) of the reaction of an individual solid that can capture CO 2 is fixed. Such T t may be outside the operating temperature range (ΔT o) for a practical capture technology. To adjust T t to fit the practical ΔT o, in this study, three scenarios of mixing schemes are explored by combining thermodynamic database mining with first principles density functionalmore » theory and phonon lattice dynamics calculations. Our calculated results demonstrate that by mixing different types of solids, it’s possible to shift T t to the range of practical operating temperature conditions. According to the requirements imposed by the pre- and post- combustion technologies and based on our calculated thermodynamic properties for the CO 2 capture reactions by the mixed solids of interest, we were able to identify the mixing ratios of two or more solids to form new sorbent materials for which lower capture energy costs are expected at the desired pressure and temperature conditions.« less

The Effect of Technology Integration on High School Students' Literacy Achievement

ERIC Educational Resources Information Center

Robinson, Kara

2016-01-01

This literature review presents a critical appraisal of current research on the role technology integration plays in high school students' literacy achievement. It identifies the gaps within the research through comprehensive analysis. The review develops an argument that the use of laptops in secondary English classrooms has a significant impact…

Web-Based Intervention for Women With Type 1 Diabetes in Pregnancy and Early Motherhood: Critical Analysis of Adherence to Technological Elements and Study Design.

PubMed

Berg, Marie; Linden, Karolina; Adolfsson, Annsofie; Sparud Lundin, Carina; Ranerup, Agneta

2018-05-02

Numerous Web-based interventions have been implemented to promote health and health-related behaviors in persons with chronic conditions. Using randomized controlled trials to evaluate such interventions creates a range of challenges, which in turn can influence the study outcome. Applying a critical perspective when evaluating Web-based health interventions is important. The objective of this study was to critically analyze and discuss the challenges of conducting a Web-based health intervention as a randomized controlled trial. The MODIAB-Web study was critically examined using an exploratory case study methodology and the framework for analysis offered through the Persuasive Systems Design model. Focus was on technology, study design, and Web-based support usage, with special focus on the forum for peer support. Descriptive statistics and qualitative content analysis were used. The persuasive content and technological elements in the design of the randomized controlled trial included all four categories of the Persuasive Systems Design model, but not all design principles were implemented. The study duration was extended to a period of four and a half years. Of 81 active participants in the intervention group, a maximum of 36 women were simultaneously active. User adherence varied greatly with a median of 91 individual log-ins. The forum for peer support was used by 63 participants. Although only about one-third of the participants interacted in the forum, there was a fairly rich exchange of experiences and advice between them. Thus, adherence in terms of social interactions was negatively affected by limited active participation due to prolonged recruitment process and randomization effects. Lessons learned from this critical analysis are that technology and study design matter and might mutually influence each other. In Web-based interventions, the use of design theories enables utilization of the full potential of technology and promotes adherence. The

Management of Guidance, Navigation and Control Technologies for Spacecraft Formations under the NASA Cross-Enterprise Technology Development Program (CETDP)

NASA Technical Reports Server (NTRS)

Hartman, Kathy; Weidow, David; Hadaegh, Fred

1999-01-01

Breakthrough technology development is critical to securing the future of our space industry. The National Aeronautics and Space Administration (NASA) Cross-Enterprise Technology Development Program (CETDP) is developing critical space technologies that enable innovative and less costly missions, and spawn new mission opportunities through revolutionary, long-term, high-risk, high-payoff technology advances. The CETDP is a NASA-wide activity managed by the Advanced Technology and Mission Studies Division (AT&MS) at Headquarters Office of Space Science. Program management for CETDP is distributed across the multiple NASA Centers and draws on expertise throughout the Agency. The technology research activities are organized along Project-level divisions called thrust areas that are directly linked to the Agency's goals and objectives of the Enterprises: Earth Science, Space Science, Human Exploration and Development of Space; and the Office of the Chief Technologist's (OCT) strategic technology areas. Cross-Enterprise technology is defined as long-range strategic technologies that have broad potential to span the needs of more than one Enterprise. Technology needs are identified and prioritized by each of the primary customers. The thrust area manager (TAM) for each division is responsible for the ultimate success of technologies within their area, and can draw from industry, academia, other government agencies, other CETDP thrust areas, and other NASA Centers to accomplish the goals of the thrust area. An overview of the CETDP and description of the future directions of the thrust area called Distributed Spacecraft are presented in this paper. Revolutionary technologies developed within this thrust area will enable the implementation of a spatially distributed network of individual vehicles, or assets, collaborating as a single collective unit, and exhibiting a common system-wide capability to accomplish a shared objective. With such a capability, new Earth and space

Management of Guidance, Navigation, and Control Technologies for Spacecraft Formations Under the NASA Cross Enterprise Technology Development Program (CETDP)

NASA Technical Reports Server (NTRS)

Hartman, Kathy; Weidow, David; Hadaegh, Fred

1999-01-01

Breakthrough technology development is critical to securing the future of our space industry. The National Aeronautics and Space Administration (NASA) Cross-Enterprise Technology Development Program (CETDP) is developing critical space technologies that enable innovative and less costly missions, and spawn new mission opportunities through revolutionary, long-term, high-risk, high-payoff technology advances. The CETDP is a NASA-wide activity managed by the Advanced Technology and Mission Studies Division (AT&MS) at Headquarters Office of Space Science. Program management for CETDP is distributed across the multiple NASA Centers and draws on expertise throughout the Agency. The technology research activities are organized along Project-level divisions called thrust areas that are directly linked to the Agency's goals and objectives of the Enterprises: Earth Science, Space Science, Human Exploration and Development of Space; and the Office of the Chief Technologist's (OCT) strategic technology areas. Cross-Enterprise technology is defined as long-range strategic technologies that have broad potential to span the needs of more than one Enterprise. Technology needs are identified and prioritized by each of the primary customers. The thrust area manager (TAM) for each division is responsible for the ultimate success of technologies within their area, and can draw from industry, academia, other government agencies, other CETDP thrust areas, and other NASA Centers to accomplish the goals of the thrust area. An overview of the CETDP and description of the future directions of the thrust area called Distributed Spacecraft are presented in this paper. Revolutionary technologies developed within this thrust area will enable the implementation of a spatially distributed network of individual vehicles, or assets, collaborating as a single collective unit, and exhibiting a common system-wide capability to accomplish a shared objective. With such a capability, new Earth and space

Use of failure mode, effect and criticality analysis to improve safety in the medication administration process.

PubMed

Rodriguez-Gonzalez, Carmen Guadalupe; Martin-Barbero, Maria Luisa; Herranz-Alonso, Ana; Durango-Limarquez, Maria Isabel; Hernandez-Sampelayo, Paloma; Sanjurjo-Saez, Maria

2015-08-01

To critically evaluate the causes of preventable adverse drug events during the nurse medication administration process in inpatient units with computerized prescription order entry and profiled automated dispensing cabinets in order to prioritize interventions that need to be implemented and to evaluate the impact of specific interventions on the criticality index. This is a failure mode, effects and criticality analysis (FMECA) study. A multidisciplinary consensus committee composed of pharmacists, nurses and doctors evaluated the process of administering medications in a hospital setting in Spain. By analysing the process, all failure modes were identified and criticality was determined by rating severity, frequency and likelihood of failure detection on a scale of 1 to 10, using adapted versions of already published scales. Safety strategies were identified and prioritized. Through consensus, the committee identified eight processes and 40 failure modes, of which 20 were classified as high risk. The sum of the criticality indices was 5254. For the potential high-risk failure modes, 21 different potential causes were found resulting in 24 recommendations. Thirteen recommendations were prioritized and developed over a 24-month period, reducing total criticality from 5254 to 3572 (a 32.0% reduction). The recommendations with a greater impact on criticality were the development of an electronic medication administration record (-582) and the standardization of intravenous drug compounding in the unit (-168). Other improvements, such as barcode medication administration technology (-1033), were scheduled for a longer period of time because of lower feasibility. FMECA is a useful approach that can improve the medication administration process. © 2015 John Wiley & Sons, Ltd.

Air Force Research Laboratory space technology strategic investment model: analysis and outcomes for warfighter capabilities

NASA Astrophysics Data System (ADS)

Preiss, Bruce; Greene, Lloyd; Kriebel, Jamie; Wasson, Robert

2006-05-01

The Air Force Research Laboratory utilizes a value model as a primary input for space technology planning and budgeting. The Space Sector at AFRL headquarters manages space technology investment across all the geographically disparate technical directorates and ensures that integrated planning is achieved across the space community. The space investment portfolio must ultimately balance near, mid, and far-term investments across all the critical space mission areas. Investment levels and growth areas can always be identified by a typical capability analysis or gap analysis, but the value model approach goes one step deeper and helps identify the potential payoff of technology investments by linking the technology directly to an existing or potential concept. The value of the technology is then viewed from the enabling performance perspective of the concept that ultimately fulfills the Air Force mission. The process of linking space technologies to future concepts and technology roadmaps will be reviewed in this paper, along with representative results from this planning cycle. The initial assumptions in this process will be identified along with the strengths and weaknesses of this planning methodology.

"Heart of Darkness" Webquest: Using Technology To Teach Literary Criticism.

ERIC Educational Resources Information Center

Rozema, Robert

This paper shows how literary criticism can enrich the high school English classroom. Specifically, the paper focuses on how an Internet teaching tool called the WebQuest helped one educator's students learn about literary criticism and apply it to "Heart of Darkness" by Joseph Conrad. The WebQuest homepage defines a WebQuest as "an…

Spatial-temporal modeling of the association between air pollution exposure and preterm birth: identifying critical windows of exposure.

PubMed

Warren, Joshua; Fuentes, Montserrat; Herring, Amy; Langlois, Peter

2012-12-01

Exposure to high levels of air pollution during the pregnancy is associated with increased probability of preterm birth (PTB), a major cause of infant morbidity and mortality. New statistical methodology is required to specifically determine when a particular pollutant impacts the PTB outcome, to determine the role of different pollutants, and to characterize the spatial variability in these results. We develop a new Bayesian spatial model for PTB which identifies susceptible windows throughout the pregnancy jointly for multiple pollutants (PM(2.5) , ozone) while allowing these windows to vary continuously across space and time. We geo-code vital record birth data from Texas (2002-2004) and link them with standard pollution monitoring data and a newly introduced EPA product of calibrated air pollution model output. We apply the fully spatial model to a region of 13 counties in eastern Texas consisting of highly urban as well as rural areas. Our results indicate significant signal in the first two trimesters of pregnancy with different pollutants leading to different critical windows. Introducing the spatial aspect uncovers critical windows previously unidentified when space is ignored. A proper inference procedure is introduced to correctly analyze these windows. © 2012, The International Biometric Society.

4-Stage Online Presence Model: Model for Module Design and Delivery Using Web 2.0 Technologies to Facilitate Critical Thinking Skills

ERIC Educational Resources Information Center

Goh, WeiWei; Dexter, Barbara; Self, Richard

2014-01-01

The main purpose of this paper is to present a conceptual model for the use of web 2.0 online technologies in order to develop and enhance students' critical thinking skills at higher education level. Wiki is chosen as the main focus in this paper. The model integrates Salmon's 5-stage model (Salmon, 2002) with Garrison's Community of Inquiry…

Quantifying nitrous oxide production pathways in wastewater treatment systems using isotope technology - A critical review.

PubMed

Duan, Haoran; Ye, Liu; Erler, Dirk; Ni, Bing-Jie; Yuan, Zhiguo

2017-10-01

Nitrous oxide (N 2 O) is an important greenhouse gas and an ozone-depleting substance which can be emitted from wastewater treatment systems (WWTS) causing significant environmental impacts. Understanding the N 2 O production pathways and their contribution to total emissions is the key to effective mitigation. Isotope technology is a promising method that has been applied to WWTS for quantifying the N 2 O production pathways. Within the scope of WWTS, this article reviews the current status of different isotope approaches, including both natural abundance and labelled isotope approaches, to N 2 O production pathways quantification. It identifies the limitations and potential problems with these approaches, as well as improvement opportunities. We conclude that, while the capabilities of isotope technology have been largely recognized, the quantification of N 2 O production pathways with isotope technology in WWTS require further improvement, particularly in relation to its accuracy and reliability. Copyright © 2017 Elsevier Ltd. All rights reserved.

The implementation of microstructural and heat treatment models to development of forming technology of critical aluminum-alloy parts

NASA Astrophysics Data System (ADS)

Biba, Nikolay; Alimov, Artem; Shitikov, Andrey; Stebunov, Sergei

2018-05-01

The demand for high performance and energy efficient transportation systems have boosted interest in lightweight design solutions. To achieve maximum weight reductions, it is not enough just to replace steel parts by their aluminium analogues, but it is necessary to change the entire concept of vehicle design. In this case we must develop methods for manufacturing a variety of critical parts with unusual and difficult to produce shapes. The mechanical properties of the material in these parts must also be optimised and tightly controlled to provide the best distribution within the part volume. The only way to achieve these goals is to implement technology development methods based on simulation of the entire manufacturing chain from preparing a billet through the forming operations and heat treatment of the product. The paper presents an approach to such technology development. The simulation of the technological chain starts with extruding a round billet. Depending on the extrusion process parameters, the billet can have different levels of material workout and variation of grain size throughout the volume. After extrusion, the billet gets formed into the required shape in a forging process. The main requirements at this stage are to get the near net shape of the product without defects and to provide proper configuration of grain flow that strengthens the product in the most critical direction. Then the product undergoes solution treatment, quenching and ageing. The simulation of all these stages are performed by QForm FEM code that provides thermo-mechanical coupled deformation of the material during extrusion and forging. To provide microstructure and heat treatment simulation, special subroutines has been developed by the authors. The proposed approach is illustrated by an industrial case study.

Critical Viscosity of Xenon investigators

NASA Technical Reports Server (NTRS)

2001-01-01

Dr. Dr. Robert F. Berg (right), principal investigator and Dr. Micheal R. Moldover (left), co-investigator, for the Critical Viscosity of Xenon (CVX/CVX-2) experiment. They are with the National Institutes of Standards and Technology, Gaithersburg, MD. The Critical Viscosity of Xenon Experiment (CVX-2) on the STS-107 Research 1 mission in 2002 will measure the viscous behavior of xenon, a heavy inert gas used in flash lamps and ion rocket engines, at its critical point. Although it does not easily combine with other chemicals, its viscosity at the critical point can be used as a model for a range of chemicals.

Searching for scientific literacy and critical pedagogy in socioscientific curricula: A critical discourse analysis

NASA Astrophysics Data System (ADS)

Cummings, Kristina M.

The omnipresence of science and technology in our society require the development of a critical and scientifically literate citizenry. However, the inclusion of socioscientific issues, which are open-ended controversial issues informed by both science and societal factors such as politics, economics, and ethics, do not guarantee the development of these skills. The purpose of this critical discourse analysis is to identify and analyze the discursive strategies used in intermediate science texts and curricula that address socioscientific topics and the extent to which the discourses are designed to promote or suppress the development of scientific literacy and a critical pedagogy. Three curricula that address the issue of energy and climate change were analyzed using Gee's (2011) building tasks and inquiry tools. The curricula were written by an education organization entitled PreSEES, a corporate-sponsored group called NEED, and a non-profit organization named Oxfam. The analysis found that the PreSEES and Oxfam curricula elevated the significance of climate change and the NEED curriculum deemphasized the issue. The PreSEES and Oxfam curricula promoted the development of scientific literacy while the NEED curricula suppressed its development. The PreSEES and Oxfam curricula both promoted the development of the critical pedagogy; however, only the Oxfam curricula provided authentic opportunities to enact sociopolitical change. The NEED curricula suppressed the development of critical pedagogy. From these findings, the following conclusions were drawn. When socioscientific issues are presented with the development of scientific literacy and critical pedagogy, the curricula allow students to develop fact-based opinions about the issue. However, curricula that address socioscientific issues without the inclusion of these skills minimize the significance of the issue and normalize the hegemonic worldview promoted by the curricula's authors. Based on these findings

Technical analysis of US Army Weapons Systems and related advanced technologies of military interest. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1991-06-14

This report summarizes the activities and accomplishments of an US Army technology security project designed to identify and develop effective policy guidelines for militarily critical technologies in specific Army systems and in broad generic technology areas of military interest, Individual systems analyses are documented in separate Weapons Systems Technical Assessments (WSTAs) and the general generic technology areas are evaluated in the Advanced Technology Assessment Reports (ATARs), However, specific details of these assessments are not addressed here, only recommendations regarding aspects of the defined approach, methodology, and format are provided and discussed.

Office of Space Science: Integrated technology strategy

NASA Technical Reports Server (NTRS)

Huntress, Wesley T., Jr.; Reck, Gregory M.

1994-01-01

This document outlines the strategy by which the Office of Space Science, in collaboration with the Office of Advanced Concepts and Technology and the Office of Space Communications, will meet the challenge of the national technology thrust. The document: highlights the legislative framework within which OSS must operate; evaluates the relationship between OSS and its principal stakeholders; outlines a vision of a successful OSS integrated technology strategy; establishes four goals in support of this vision; provides an assessment of how OSS is currently positioned to respond to the goals; formulates strategic objectives to meet the goals; introduces policies for implementing the strategy; and identifies metrics for measuring success. The OSS Integrated Technology Strategy establishes the framework through which OSS will satisfy stakeholder expectations by teaming with partners in NASA and industry to develop the critical technologies required to: enhance space exploration, expand our knowledge of the universe, and ensure continued national scientific, technical and economic leadership.

Identifying new technologies that save energy and reduce costs to the Federal sector: The New Technology Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hunt, W.D.M.; Conover, D.R.; Stockmeyer, M.K.

1995-11-01

In 1990 the New Technology Demonstration Program (formerly the Test Bed Demonstration Program) was initiated by the US Department of Energy`s Office (DOE`s) of Federal Energy Management Programs with the purpose of accelerating the introduction of new technologies into the Federal sector. The program has since expanded into a multi-laboratory collaborative effort that evaluates new technologies and shares the results with the Federal design and procurement communities. These evaluations are performed on a collaborative basis which typically includes technology manufacturers, Federal facilities, utilities, trade associations, research institutes, and other in partnership with DOE. The end result is a range ofmore » effective technology transfer tools that provide operations and performance data on new technologies to Federal designers, building managers, and procurement officials. These tools assist in accelerating a technology`s Federal application and realizing reductions in energy consumption and costs.« less

Critical to quality in telemedicine service management: application of DFSS (Design for Six Sigma) and SERVQUAL).

PubMed

Yun, Eun Kyoung; Chun, Kee Moon

2008-01-01

Telemedicine generally refers to the use of communications and information technologies for the delivery of health care. owever, telemedicine is not merely a simple combination of health care and technology. The researchers propose a systematic approach for assessing needs of telemedicine customers, called critical-to-quality (CTQ) in Six Sigma, with a purpose of continuous quality improvement. The combination approach using DFSS (Design for Six Sigma) and SERVQUAL (Service Quality Framework) was applied to define the critical quality attributes of telemedicine service management and to match them with the current telemedicine process. With a step-by-step procedure, telemedicine service process was reviewed and all the important CTQ candidates identified via a case study. The findings suggest that nurses need further understanding and research methods that will improve and manage the quality of health care service in various medical fields.

Success factors in technology development

NASA Astrophysics Data System (ADS)

Preston, John T.

1995-01-01

Universities in the U.S. have a significant impact on business through the transfer of technology. This paper describes goals and philosophy of the Technology Licensing Office at the Massachusetts Institute of Technology. This paper also relates the critical factors for susscessful technology transfer, particularly relating to new business formation. These critical factors include the quality of the technology, the quality of the management, the quality of the investor, the passion for success, and the image of the company. Descriptions of three different levels of investment are also given and the most successful level of investment for starting a new company is reviewed. Licensing to large companies is also briefly reviewed, as this type of licensing requires some different strategies than that of licensing to start-up companies. High quality critical factors and intelligent investment create rewards for the parties and successful ventures.

Developing Critical Thinking for the Internet

ERIC Educational Resources Information Center

Pachtman, Andrew B.

2012-01-01

The internet is the defining technology for an entire generation. It requires the student to be able to critically evaluate information. It also requires the student to think critically about what information is contained in the information retrieved. How do we prepare developmental education students for these tasks? This article discusses the…

A knowledge-based taxonomy of critical factors for adopting electronic health record systems by physicians: a systematic literature review

PubMed Central

2010-01-01

Background The health care sector is an area of social and economic interest in several countries; therefore, there have been lots of efforts in the use of electronic health records. Nevertheless, there is evidence suggesting that these systems have not been adopted as it was expected, and although there are some proposals to support their adoption, the proposed support is not by means of information and communication technology which can provide automatic tools of support. The aim of this study is to identify the critical adoption factors for electronic health records by physicians and to use them as a guide to support their adoption process automatically. Methods This paper presents, based on the PRISMA statement, a systematic literature review in electronic databases with adoption studies of electronic health records published in English. Software applications that manage and process the data in the electronic health record have been considered, i.e.: computerized physician prescription, electronic medical records, and electronic capture of clinical data. Our review was conducted with the purpose of obtaining a taxonomy of the physicians main barriers for adopting electronic health records, that can be addressed by means of information and communication technology; in particular with the information technology roles of the knowledge management processes. Which take us to the question that we want to address in this work: "What are the critical adoption factors of electronic health records that can be supported by information and communication technology?". Reports from eight databases covering electronic health records adoption studies in the medical domain, in particular those focused on physicians, were analyzed. Results The review identifies two main issues: 1) a knowledge-based classification of critical factors for adopting electronic health records by physicians; and 2) the definition of a base for the design of a conceptual framework for supporting the

A forecast of space technology, 1980 - 2000

NASA Technical Reports Server (NTRS)

1976-01-01

The future of space technology in the United States during the period 1980-2000 was presented, in relation to its overall role within the space program. Conclusions were drawn and certain critical areas were identified. Three different methods to support this work were discussed: (1) by industry, largely without NASA or other government support, (2) partially by industry, but requiring a fraction of NASA or similar government support, (3) currently unique to space requirements and therefore relying almost totally on NASA support. The proposed work was divided into the following areas: (1) management of information (acquisition, transfer, processing, storing) (2) management of energy (earth-to-orbit operations, space power and propulsion), (3) management of matter (animate, inanimate, transfer, storage), (4) basic scientific resources for technological advancement (cryogenics, superconductivity, microstructures, coherent radiation and integrated optics technology).

Technology development, demonstration, and orbital support requirements for manned lunar and Mars missions

NASA Technical Reports Server (NTRS)

Llewellyn, Charles P.; Brender, Karen D.

1990-01-01

An overview of the critical technology needs and the Space Station Freedom (SSF) focused support requirements for the Office of Exploration's (OEXP) manned lunar and Mars missions is presented. Major emphasis is directed at the technology needs associated with the low earth orbit (LEO) transportation node assembly and vehicle processing functions required by the lunar and Mars mission flight elements. The key technology areas identified as crucial to support the LEO node function include in-space assembly and construction, in-space vehicle processing and refurbishment, space storable cryogenics, and autonomous rendezvous and docking.

Technology needs development and orbital support requirements for manned lunar and Mars missions

NASA Technical Reports Server (NTRS)

Brender, Karen D.; Llewellyn, Charles P.

1990-01-01

This paper presents an overview of the critical technology needs and the Space Station Freedom focused support requirements for the Office of Exploration's manned lunar and Mars missions. The emphasis is on e directed at the technology needs associated with the low earth orbit (LEO) transportation node assembly and vehicle processing functions required by the lunar Mars mission flight elements. The key technology areas identified as crucial to support the LEO node function include in-space assembly and construction, in-space vehicle processing and refurbishment, space storable cryogenics, and autonomous rendezvous and docking.

"In the Middle of Difficulty Lies Opportunity"--Using a Case Study to Identify Critical Success Factors Contributing to the Initiation of International Collaborative Projects

ERIC Educational Resources Information Center

Johnson, Ian M.

2005-01-01

This paper identifies factors that contribute to the successful initiation of international collaborative projects intended to support the development of education for librarianship and information sciences. It discusses the widespread failure to analyse the Critical Success Factors in international collaborative projects and proposes a case study…

Does technology really enhance nurse education?

PubMed

Goodchild, Tim

2018-07-01

Technology has clearly impacted upon our working lives, and the purpose of this paper is to offer a critical insight into the ubiquitous presence of technology in nurse education. This paper argues that technology enhanced learning is predicated on the promise of potential and purported transformation of teaching and learning. It suggests that there is a lack of critical engagement in the academic field of technology enhanced learning, and adds a critical voice to some of the emerging arguments in this area. There is also a lack of systematic evidence supporting the enhancement offered by technology, and yet the technology enhanced project continues to persist. The discourse surrounding technology enhanced learning has become so dominant, so pervasive, that those of us within it can no longer see alternatives. But there are alternatives, and this paper argues that we need to challenge the dominance of technology enhanced learning, and become aware of its contingent nature. Copyright © 2018 Elsevier Ltd. All rights reserved.

Novel treatment technologies for PFAS compounds: A critical review.

PubMed

Kucharzyk, Katarzyna H; Darlington, Ramona; Benotti, Mark; Deeb, Rula; Hawley, Elisabeth

2017-12-15

Perfluorinated compounds such as perfluorooctane sulfonate (PFOS) and perfluorooctanoic acid (PFOA) have recently drawn great attention due to their wide distribution in aquatic environments. The understanding of the physicochemical properties and fate and transport of PFAs in groundwater is still limited. Preliminary studies indicate that these compounds can readily bioaccumulate and pose human and animal health concerns. Due to their physicochemical properties, PFOS and PFOA are water soluble, nonvolatile and persistent in the environment, which is a cause of concern related to their treatment with conventional remediation technologies. Extraction with inefficient carbon adsorption is one of the most common treatment technologies for remediation of PFOS- or PFOA-impacted groundwater. Several other innovative and promising technologies, including sonochemistry, bioremediation and photolysis, have been tested for their effectiveness in removal of perfluorinated compounds. This paper provides a baseline for understanding research needs to better develop treatment technologies for PFOA and PFOS in groundwater. Frontiers for improving the state of practice for PFOA and PFOS treatment include the development of more cost-effective ex situ treatment methods and the development and demonstration of promising in situ treatment technologies at the pilot and full scale. Copyright © 2017 Elsevier Ltd. All rights reserved.

Human Mars EDL Pathfinder Study: Assessment of Technology Development Gaps and Mitigations

NASA Technical Reports Server (NTRS)

Lillard, Randolph; Olejniczak, Joe; Polsgrove, Tara; Cianciolo, Alice Dwyer; Munk, Michelle; Whetsel, Charles; Drake, Bret

2017-01-01

This paper presents the results of a NASA initiated Agency-wide assessment to better characterize the risks and potential mitigation approaches associated with landing human class Entry, Descent, and Landing (EDL) systems on Mars. Due to the criticality and long-lead nature of advancing EDL techniques, it is necessary to determine an appropriate strategy to improve the capability to land large payloads. A key focus of this study was to understand the key EDL risks and with a focus on determining what "must" be tested at Mars. This process identified the various risks and potential risk mitigation strategies along with the key near term technology development efforts required and in what environment those technology demonstrations were best suited. The study identified key risks along with advantages to each entry technology. In addition, it was identified that provided the EDL concept of operations (con ops) minimized large scale transition events, there was no technology requirement for a Mars pre-cursor demonstration. Instead, NASA should take a direct path to a human-scale lander.

Converging, pervasive technologies: chronic and emerging issues and policy adequacy.

PubMed

Seelman, Katherine D

2008-01-01

This article is a thought piece with the expansive goal of identifying policy facilitators and barriers to the development of usable and accessible advanced information and communications technology for people with disabilities across the age span at the research and development and marketing stages. The working hypothesis is as follows: The lack of participation in and representation of the interests of people with disabilities in the technology resource system is a barrier to availability of affordable consumer goods that enable independence and community integration. Converging, pervasive computing technology, especially in housing applications, is used as a case example, drawing especially from research and development conducted by the National Science Foundation Quality of Life Technology Engineering Research Center. A critical theory approach is used to identify problems and seek solutions to the apparent lack of balance between the demand and needs of disabled users and the supply and availability of usable, affordable consumer goods produced by the technology resource system in which allocation decisions are made. The approach uses policy analysis tools such as a technology assessment framework; the participation and environment components of the World Health Organization's International Classification of Functioning, Disability and Health; and participatory action research.

Critical technology areas of an SPS development and the applicability of European technology

NASA Technical Reports Server (NTRS)

Kassing, D.; Ruth, J.

1980-01-01

Possible system development and implementation scenarios for the hypothetical European part of a cooperative Satellite Power System effort are discussed, and the technology and systems requirements which could be used as an initial guideline for further evaluation studies are characterized. Examples of advanced European space technologies are described including high power microwave amplifiers, antennas, advanced structures, multi-kilowatt solar arrays, attitude and orbit control systems, and electric propulsion.

Identifying Basic Factors for Communal Prosperity - Space Technologies are Bridging this Gap

NASA Technical Reports Server (NTRS)

Habib, Shahid

2006-01-01

There are many aspects, which are important for maintaining environmentally clean and safe conditions for a healthy and economically self-sufficient community. This problem was somewhat of a lesser concern in earlier days because many communities were small, isolated and solely dependent upon their owners or landlords. Due to an astronomical growth in human population within the last century, extensive use of combustion technologies, and changing environmental conditions has resulted in scarcity of natural resources. In reality, the societal sustainability issues are becoming much more acute and complex. Therefore, the researchers and social scientists are joining forces to address these topics and find solutions to many contentious areas such as public health and diseases, water resources, agriculture production, survivability during and after the natural disasters, energy needs and many others. Forthrightly speaking, there is no canned solution or a methodology to go about solving these issues since the magnitude and complexity of these issues are multi-dimensional and are further inter-locked with other areas. A common sense tells us that we need data, resources and technologies to begin addressing these problems. This is where space observations have provided us with tremendous information and opportunities, which are of great assets to the science, economist, and social scientists. This paper specifically addresses what are critical areas for a successful societal sustainability and growth; and how can we take advantage of multiple sensors and models already in existence. Increasing our knowledge of the home planet, via amplified set of observations, is certainly a right step in a right direction. Furthermore, this is a pre-requisite in understanding multiple hazard phenomena's. This paper further examines various space sensors and observing architectures that can be useful specifically in addressing some of these complex issues. The ultimate goal is to serve

Using Technology to Deliver Mental Health Services to Children and Youth: A Scoping Review

PubMed Central

Boydell, Katherine M.; Hodgins, Michael; Pignatiello, Antonio; Teshima, John; Edwards, Helen; Willis, David

2014-01-01

Objective: To conduct a scoping review on the use of technology to deliver mental health services to children and youth in order to identify the breadth of peer-reviewed literature, summarize findings and identify gaps. Method: A literature database search identified 126 original studies meeting criteria for review. Descriptive numerical summary and thematic analyses were conducted. Two reviewers independently extracted data. Results: Studies were characterized by diverse technologies including videoconferencing, telephone and mobile phone applications and Internet-based applications such as email, web sites and CD-ROMs. Conclusion: The use of technologies plays a major role in the delivery of mental health services and supports to children and youth in providing prevention, assessment, diagnosis, counseling and treatment programs. Strategies are growing exponentially on a global basis, thus it is critical to study the impact of these technologies on child and youth mental health service delivery. An in-depth review and synthesis of the quality of findings of studies on effectiveness of the use of technologies in service delivery are also warranted. A full systematic review would provide that opportunity. PMID:24872824

Using technology to deliver mental health services to children and youth: a scoping review.

PubMed

Boydell, Katherine M; Hodgins, Michael; Pignatiello, Antonio; Teshima, John; Edwards, Helen; Willis, David

2014-05-01

To conduct a scoping review on the use of technology to deliver mental health services to children and youth in order to identify the breadth of peer-reviewed literature, summarize findings and identify gaps. A literature database search identified 126 original studies meeting criteria for review. Descriptive numerical summary and thematic analyses were conducted. Two reviewers independently extracted data. Studies were characterized by diverse technologies including videoconferencing, telephone and mobile phone applications and Internet-based applications such as email, web sites and CD-ROMs. The use of technologies plays a major role in the delivery of mental health services and supports to children and youth in providing prevention, assessment, diagnosis, counseling and treatment programs. Strategies are growing exponentially on a global basis, thus it is critical to study the impact of these technologies on child and youth mental health service delivery. An in-depth review and synthesis of the quality of findings of studies on effectiveness of the use of technologies in service delivery are also warranted. A full systematic review would provide that opportunity.

ExMC Technology Watch

NASA Technical Reports Server (NTRS)

Krihak, M.; Barr, Y.; Watkins, S.; Fung, P.; McGrath, T.; Baumann, D.

2012-01-01

The Technology Watch (Tech Watch) project is a NASA endeavor conducted under the Human Research Program's (HRP) Exploration Medical Capability (ExMC) element, and focusing on ExMC technology gaps. The project involves several NASA centers, including the Johnson Space Center (JSC), Glenn Research Center (GRC), Ames Research Center (ARC), and the Langley Research Center (LaRC). The objective of Tech Watch is to identify emerging, high-impact technologies that augment current NASA HRP technology development efforts. Identifying such technologies accelerates the development of medical care and research capabilities for the mitigation of potential health issues encountered during human space exploration missions. The aim of this process is to leverage technologies developed by academia, industry and other government agencies and to identify the effective utilization of NASA resources to maximize the HRP return on investment. The establishment of collaborations with these entities is beneficial to technology development, assessment and/or insertion and further NASA's goal to provide a safe and healthy environment for human exploration. In 2011, the major focus areas for Tech Watch included information dissemination, education outreach and public accessibility to technology gaps and gap reports. The dissemination of information was accomplished through site visits to research laboratories and/or companies, and participation at select conferences where Tech Watch objectives and technology gaps were presented. Presentation of such material provided researchers with insights on NASA ExMC needs for space exploration and an opportunity to discuss potential areas of common interest. The second focus area, education outreach, was accomplished via two mechanisms. First, several senior student projects, each related to an ExMC technology gap, were sponsored by the various NASA centers. These projects presented ExMC related technology problems firsthand to collegiate laboratories

ExMC Technology Watch

NASA Technical Reports Server (NTRS)

Krihak, M.; Barr, Y.; Watkins, S.; Fung, P.; McGrath, T.; Baumann, D.

2012-01-01

The Technology Watch (Tech Watch) project is a NASA endeavor conducted under the Human Research Programs (HRP) Exploration Medical Capability (ExMC) element, and focusing on ExMC technology gaps. The project involves several NASA centers, including the Johnson Space Center (JSC), Glenn Research Center (GRC), Ames Research Center (ARC), and the Langley Research Center (LaRC). The objective of Tech Watch is to identify emerging, high-impact technologies that augment current NASA HRP technology development efforts. Identifying such technologies accelerates the development of medical care and research capabilities for the mitigation of potential health issues encountered during human space exploration missions. The aim of this process is to leverage technologies developed by academia, industry and other government agencies and to identify the effective utilization of NASA resources to maximize the HRP return on investment. The establishment of collaborations with these entities is beneficial to technology development, assessment and/or insertion and further NASAs goal to provide a safe and healthy environment for human exploration. In 2011, the major focus areas for Tech Watch included information dissemination, education outreach and public accessibility to technology gaps and gap reports. The dissemination of information was accomplished through site visits to research laboratories and/or companies, and participation at select conferences where Tech Watch objectives and technology gaps were presented. Presentation of such material provided researchers with insights on NASA ExMC needs for space exploration and an opportunity to discuss potential areas of common interest. The second focus area, education outreach, was accomplished via two mechanisms. First, several senior student projects, each related to an ExMC technology gap, were sponsored by the various NASA centers. These projects presented ExMC related technology problems firsthand to collegiate laboratories

Design and operations technologies - Integrating the pieces. [for future space systems design

NASA Technical Reports Server (NTRS)

Eldred, C. H.

1979-01-01

As major elements of life-cycle costs (LCC) having critical impacts on the initiation and utilization of future space programs, the areas of vehicle design and operations are reviewed in order to identify technology requirements. Common to both areas is the requirement for efficient integration of broad, complex systems. Operations technologies focus on the extension of space-based capabilities and cost reduction through the combination of innovative design, low-maintenance hardware, and increased manpower productivity. Design technologies focus on computer-aided techniques which increase productivity while maintaining a high degree of flexibility which enhances creativity and permits graceful design changes.

Role of geospatial technology in identifying natural habitat of malarial vectors in South Andaman, India.

PubMed

Shankar, Shiva; Agrawal, Deepak Kumar

2016-03-01

Malaria is a serious disease which has repeatedly threatened Andaman, an island territory of India. Uncharted dense vegetation and inaccessibility are the salient features of the area and the major areas are covered by remotely sensed data to identify the malaria vector's natural habitat. The present investigation appraises the role of geospatial technologies in identifying the natural habitat of malarial vectors. The base map was prepared from Survey of India's toposheets, the landuse map was prepared from indices techniques like normalised difference vegetation index (NDVI), normalised difference water index (NDWI), modified normalised difference water index (MNDWI), normalised difference pond index (NDPI), and normalized difference turbidity index (NDTI) in conjugation with visual interpretation. The soil moisture content map was reproduced from the soil atlas of Andaman and Nicobar Islands followed by generation of an aspect profile from ASTER-GDEM satellite data. Both the landuse map and aspect profile were validated for accuracy in the field. A weighted overlay analysis of the classes like landuse, soil moisture and aspect profile of the study area resulted in identification of the potential natural habitat map of malaria vector surrounding the areas of Tushnabad, Garacharma, Manglutan, Chouldari, Ferrargunj and Wimberlygunj hamlets. The natural habitat of malaria vector indicated that Tushnabad, Garacharma, Manglutan, Chouldari, Ferrargunj and Wimberlygunj hamlets are within the proximity of 2.5 km from the prime habitat location with more number of malaria positive cases. Also these hamlets are surrounded by dense evergreen forest and the land surface is draped by clay loam and clay soil texture exhibiting high soil moisture content warranting high rates of survival and proliferation of the vector ensuring resurgence of malaria every year. It is thus concluded that application of geospatial technologies plays an important role in identifying the natural

Identifying critical success factors (CSFs) of Facilities Management (FM) in non-low cost high-rise residential buildings

NASA Astrophysics Data System (ADS)

Dahlan, F. M.; Zainuddin, A.

2018-02-01

Critical success factors (CSFs) are important key areas of activity that must be performed well in any Facilities Management (FM) organisation to achieve its missions, objectives or goals. Before implementing CSFs, an FM organisation must identify the key areas where things must be done properly to enable the business to flourish. Although many performance measurements in FM organisation have been discussed in previous research, not much research has been done on CSFs from the perspective of FM business in non-low cost high-rise residential buildings. The purpose of this study is to develop a methodology in developing the CSFs group and CSFs for FM organisation in non-low cost residential buildings. This research will involve three (3) phases of research strategy to achieve the objective of this research.

A critical assessment of research needs identified by the dietary guidelines committees from 1980 to 2010.

PubMed

Myers, Esther F; Khoo, Chor-San; Murphy, William; Steiber, Alison; Agarwal, Sanjiv

2013-07-01

The Dietary Goals for the United States were introduced in 1977 and have been followed by the Dietary Guidelines for Americans (DGA) every 5 years from 1980 to 2010. The DGA provide science-based advice to promote health and reduce risk for major chronic diseases through diet and physical activity. The Dietary Guidelines Advisory Committees are charged to provide updates of the DGA topics using the best available science. The Dietary Guidelines Advisory Committees' reports also identified 169 research gaps. To date, these gaps have not been compiled and assessed. We evaluated trends in number, topics, and specificity of research gaps by year by placing them in the following topic categories: general, chronic diseases/conditions, diet/diet pattern, food/ingredient, and nutrient-specific research gaps. Some research topics (eg, sodium and hypertension and appropriate uses of DGA) have been identified consistently across the years, some emerged in later years (eg, increasingly specific research gaps between dietary fatty acids and cardiovascular disease), and others appeared intermittently (eg, relationships between dietary components and cancer). These results are a call to action for all DGA stakeholders to have an immediate dialogue about how the research enterprise can best address critical research needs in a timely way to support public policy. Copyright © 2013 Academy of Nutrition and Dietetics. Published by Elsevier Inc. All rights reserved.

Older people, assistive technologies, and the barriers to adoption: A systematic review.

PubMed

Yusif, Salifu; Soar, Jeffrey; Hafeez-Baig, Abdul

2016-10-01

Older people generally prefer to continue living in their own homes rather than move into residential age care institutions. Assistive technologies and sensors in the home environment and/or bodily worn systems that monitor people's movement might contribute to an increased sense of safety and security at home. However, their use can raise ethical anxieties as little is known about how older persons perceive assistive and monitoring technologies. To review the main barriers to the adoption of assistive technologies (ATs) by older adults in order to uncover issues of concern from empirical studies and to arrange these issues from the most critical to the least critical. A 4-step systematic review was conducted using empirical studies: locating and identifying relevant articles; screening of located articles; examination of full text articles for inclusion/exclusion; and detail examination of the 44 articles included. Privacy is a top critical concern to older adults, registering a 34% of the total articles examined. Two other equally potent barriers to the adoption of ATs were trust and functionality/added value representing 27 and 25 per cent each respectively of the total studies examined. Also of serious concerns are cost of ATs and ease of use and suitability for daily use (23%) each respectively, perception of "no need" (20%), stigma (18%), and fear of dependence and lack of training (16%) each respectively. These underlying factors are generation/cohort effects and physical decline relating to aging, and negative attitudes toward technologies such as the so-called "gerontechnologies" specifically targeting older adults. However, more and more older adults adopt different kinds of ATs in order to fit in with the society. The identified underlying factors are generation/cohort effects and physical decline relating to aging, and negative attitudes toward technologies. The negative attitudes that are most frequently associated with technologies such as the so

The use of technology to promote vaccination: A social ecological model based framework.

PubMed

Kolff, Chelsea A; Scott, Vanessa P; Stockwell, Melissa S

2018-05-21

Vaccinations are an important and effective cornerstone of preventive medical care. Growing technologic capabilities and use by both patients and providers present critical opportunities to leverage these tools to improve vaccination rates and public health. We propose the Social Ecological Model as a useful theoretical framework to identify areas in which technology has been or may be leveraged to target undervaccination across the individual, interpersonal, organizational, community, and society levels and the ways in which these levels interact.

Harnessing Information Technology to Improve the Process of Students' Evaluations of Teaching: An Exploration of Students' Critical Success Factors of Online Evaluations

ERIC Educational Resources Information Center

Nevo, Dorit; McClean, Ron; Nevo, Saggi

2010-01-01

This paper discusses the relative advantage offered by online Students' Evaluations of Teaching (SET) and describes a study conducted at a Canadian university to identify critical success factors of online evaluations from students' point of view. Factors identified as important by the students include anonymity, ease of use (of both SET survey…

Criticism and the Curriculum.

ERIC Educational Resources Information Center

Smith, Paul; Foulke, Robert D.

1964-01-01

A revised English curriculum, based upon different kinds of literary criticism, is counseled in this two-part paper. Part 1 identifies four kinds of criticism--formalist, synoptic, extrinsic, and stylistic. A conventional English Curriculum is briefly outlined. Curricular theories are discussed and positive and negative attempts to define…

Reasons For Physicians Not Adopting Clinical Decision Support Systems: Critical Analysis.

PubMed

Khairat, Saif; Marc, David; Crosby, William; Al Sanousi, Ali

2018-04-18

Clinical decision support systems (CDSSs) are an integral component of today's health information technologies. They assist with interpretation, diagnosis, and treatment. A CDSS can be embedded throughout the patient safety continuum providing reminders, recommendations, and alerts to health care providers. Although CDSSs have been shown to reduce medical errors and improve patient outcomes, they have fallen short of their full potential. User acceptance has been identified as one of the potential reasons for this shortfall. The purpose of this paper was to conduct a critical review and task analysis of CDSS research and to develop a new framework for CDSS design in order to achieve user acceptance. A critical review of CDSS papers was conducted with a focus on user acceptance. To gain a greater understanding of the problems associated with CDSS acceptance, we conducted a task analysis to identify and describe the goals, user input, system output, knowledge requirements, and constraints from two different perspectives: the machine (ie, the CDSS engine) and the user (ie, the physician). Favorability of CDSSs was based on user acceptance of clinical guidelines, reminders, alerts, and diagnostic suggestions. We propose two models: (1) the user acceptance and system adaptation design model, which includes optimizing CDSS design based on user needs/expectations, and (2) the input-process-output-engagemodel, which reveals to users the processes that govern CDSS outputs. This research demonstrates that the incorporation of the proposed models will improve user acceptance to support the beneficial effects of CDSSs adoption. Ultimately, if a user does not accept technology, this not only poses a threat to the use of the technology but can also pose a threat to the health and well-being of patients. ©Saif Khairat, David Marc, William Crosby, Ali Al Sanousi. Originally published in JMIR Medical Informatics (http://medinform.jmir.org), 18.04.2018.

AIRS-Light Instrument Concept and Critical Technology Development

NASA Technical Reports Server (NTRS)

Maschhoff, Kevin

2001-01-01

Understanding Earth's climate, atmospheric transport mechanisms, and the hydrologic cycle requires a precise knowledge of global atmospheric circulation, temperature profiles, and water vapor distribution. The accuracy of advanced sounders such as AIRS/AMSU/HSB on NASA's Aqua spacecraft can match radiosonde accuracy. It is essential to fold those capabilities fully into the NPOESS, enabling soundings of radiosonde accuracy, every 6 hours around the globe on an operational basis. However, the size, mass, power demands, and thermal characteristics of the Aqua sounding instrument suite cannot be accommodated on the NPOESS spacecraft. AIRS-Light is an instrument concept, developed under the Instrument Incubator Program, which provides IR sounding performance identical to the AIRS instrument, but uses advances in HgCdTe FPA technology and pulse tube cooler technology, as well as design changes to dramatically reduce the size, mass, and power demand, allowing AIRS-Light to meet all NPOESS spacecraft interface requirements. The instrument concept includes substantial re-use of AIRS component designs, including the complex AIRS FPA, to reduce development risk and cost. The AIRS-Light Instrument Incubator program fostered the development of photovoltaic-mode HgCdTe detector array technology for the 13.5-15.4 micron band covered by photoconductive-mode HgCdTe arrays in AIRS, achieved state of the art results in this band, and substantially reduced the development risk for this last new technology needed for AIRS-Light implementation, A demonstration of a prototype 14.5-15.4 micron band IRFPA in a reduced heat-load dewar together with the IMAS pulse tube cryocooler is in progress.

Identifying and Overcoming Critical Barriers to Widespread Second Use of PEV Batteries

DOE Office of Scientific and Technical Information (OSTI.GOV)

Neubauer, J.; Smith, K.; Wood, E.

2015-02-01

Both the market penetration of plug-in electric vehicles (PEVs) and deployment of grid-connected energy storage systems are presently restricted by the high cost of batteries. Battery second use (B2U) strategies--in which a single battery first serves an automotive application, then is redeployed into a secondary market--could help address both issues by reducing battery costs to the primary (automotive) and secondary (electricity grid) users. This study investigates the feasibility of and major barriers to the second use of lithium-ion PEV batteries by posing and answering the following critical B2U questions: 1. When will used automotive batteries become available, and how healthymore » will they be? 2. What is required to repurpose used automotive batteries, and how much will it cost? 3. How will repurposed automotive batteries be used, how long will they last, and what is their value? Advanced analysis techniques are employed that consider the electrical, thermal, and degradation response of batteries in both the primary (automotive) and secondary service periods. Second use applications are treated in detail, addressing operational requirements, economic value, and market potential. The study concludes that B2U is viable and could provide considerable societal benefits due to the large possible supply of repurposed automotive batteries and substantial remaining battery life following automotive service. However, the only identified secondary market large enough to consume the supply of these batteries (utility peaker plant replacement) is expected to be a low margin market, and thus B2U is not expected to affect the upfront cost of PEVs.« less

Paving the Way to Successful Implementation: Identifying Key Barriers to Use of Technology-Based Therapeutic Tools for Behavioral Health Care.

PubMed

Ramsey, Alex; Lord, Sarah; Torrey, John; Marsch, Lisa; Lardiere, Michael

2016-01-01

This study aimed to identify barriers to use of technology for behavioral health care from the perspective of care decision makers at community behavioral health organizations. As part of a larger survey of technology readiness, 260 care decision makers completed an open-ended question about perceived barriers to use of technology. Using the Consolidated Framework for Implementation Research (CFIR), qualitative analyses yielded barrier themes related to characteristics of technology (e.g., cost and privacy), potential end users (e.g., technology literacy and attitudes about technology), organization structure and climate (e.g., budget and infrastructure), and factors external to organizations (e.g., broadband accessibility and reimbursement policies). Number of reported barriers was higher among respondents representing agencies with lower annual budgets and smaller client bases relative to higher budget, larger clientele organizations. Individual barriers were differentially associated with budget, size of client base, and geographic location. Results are discussed in light of implementation science frameworks and proactive strategies to address perceived obstacles to adoption and use of technology-based behavioral health tools.

Paving the Way to Successful Implementation: Identifying Key Barriers to Use of Technology-Based Therapeutic Tools for Behavioral Health Care

PubMed Central

Ramsey, Alex; Lord, Sarah; Torrey, John; Marsch, Lisa; Lardiere, Michael

2014-01-01

This study aimed to identify barriers to use of technology for behavioral health care from the perspective of care decision-makers at community behavioral health organizations. As part of a larger survey of technology readiness, 260 care decision-makers completed an open-ended question about perceived barriers to use of technology. Using the Consolidated Framework for Implementation Research (CFIR), qualitative analyses yielded barrier themes related to characteristics of technology (e.g., cost, privacy), potential end-users (e.g., technology literacy, attitudes about technology), organization structure and climate (e.g., budget, infrastructure), and factors external to organizations (e.g., broadband accessibility, reimbursement policies). Number of reported barriers was higher among respondents representing agencies with lower annual budgets and smaller client bases relative to higher budget, larger clientele organizations. Individual barriers were differentially associated with budget, size of client base, and geographic location. Results are discussed in light of implementation science frameworks and proactive strategies to address perceived obstacles to adoption and use of technology-based behavioral health tools. PMID:25192755

A FRET Biosensor for ROCK Based on a Consensus Substrate Sequence Identified by KISS Technology.

PubMed

Li, Chunjie; Imanishi, Ayako; Komatsu, Naoki; Terai, Kenta; Amano, Mutsuki; Kaibuchi, Kozo; Matsuda, Michiyuki

2017-01-11

Genetically-encoded biosensors based on Förster/fluorescence resonance energy transfer (FRET) are versatile tools for studying the spatio-temporal regulation of signaling molecules within not only the cells but also tissues. Perhaps the hardest task in the development of a FRET biosensor for protein kinases is to identify the kinase-specific substrate peptide to be used in the FRET biosensor. To solve this problem, we took advantage of kinase-interacting substrate screening (KISS) technology, which deduces a consensus substrate sequence for the protein kinase of interest. Here, we show that a consensus substrate sequence for ROCK identified by KISS yielded a FRET biosensor for ROCK, named Eevee-ROCK, with high sensitivity and specificity. By treating HeLa cells with inhibitors or siRNAs against ROCK, we show that a substantial part of the basal FRET signal of Eevee-ROCK was derived from the activities of ROCK1 and ROCK2. Eevee-ROCK readily detected ROCK activation by epidermal growth factor, lysophosphatidic acid, and serum. When cells stably-expressing Eevee-ROCK were time-lapse imaged for three days, ROCK activity was found to increase after the completion of cytokinesis, concomitant with the spreading of cells. Eevee-ROCK also revealed a gradual increase in ROCK activity during apoptosis. Thus, Eevee-ROCK, which was developed from a substrate sequence predicted by the KISS technology, will pave the way to a better understanding of the function of ROCK in a physiological context.

Technology Games: Using Wittgenstein for Understanding and Evaluating Technology.

PubMed

Coeckelbergh, Mark

2017-08-15

In the philosophy of technology after the empirical turn, little attention has been paid to language and its relation to technology. In this programmatic and explorative paper, it is proposed to use the later Wittgenstein, not only to pay more attention to language use in philosophy of technology, but also to rethink technology itself-at least technology in its aspect of tool, technology-in-use. This is done by outlining a working account of Wittgenstein's view of language (as articulated mainly in the Investigations) and by then applying that account to technology-turning around Wittgenstein's metaphor of the toolbox. Using Wittgenstein's concepts of language games and form of life and coining the term 'technology games', the paper proposes and argues for a use-oriented, holistic, transcendental, social, and historical approach to technology which is empirically but also normatively sensitive, and which takes into account implicit knowledge and know-how. It gives examples of interaction with social robots to support the relevance of this project for understanding and evaluating today's technologies, makes comparisons with authors in philosophy of technology such as Winner and Ihde, and sketches the contours of a phenomenology and hermeneutics of technology use that may help us to understand but also to gain a more critical relation to specific uses of concrete technologies in everyday contexts. Ultimately, given the holism argued for, it also promises a more critical relation to the games and forms of life technologies are embedded in-to the ways we do things.

Teacher Beliefs and Technology Integration Practices: A Critical Relationship

ERIC Educational Resources Information Center

Ertmer, Peggy A.; Ottenbreit-Leftwich, Anne T.; Sadik, Olgun; Sendurur, Emine; Sendurur, Polat

2012-01-01

Early studies indicated that teachers' enacted beliefs, particularly in terms of classroom technology practices, often did not align with their espoused beliefs. Researchers concluded this was due, at least in part, to a variety of external barriers that prevented teachers from using technology in ways that aligned more closely with their beliefs.…

Special populations: care of the critically ill and injured during pandemics and disasters: CHEST consensus statement.

PubMed

Dries, David; Reed, Mary Jane; Kissoon, Niranjan; Christian, Michael D; Dichter, Jeffrey R; Devereaux, Asha V; Upperman, Jeffrey S

2014-10-01

Past disasters have highlighted the need to prepare for subsets of critically ill, medically fragile patients. These special patient populations require focused disaster planning that will address their medical needs throughout the event to prevent clinical deterioration. The suggestions in this article are important for all who are involved in large-scale disasters or pandemics with multiple critically ill or injured patients, including frontline clinicians, hospital administrators, and public health or government officials. Key questions regarding the care of critically ill or injured special populations during disasters or pandemics were identified, and a systematic literature review (1985-2013) was performed. No studies of sufficient quality were identified. Therefore, the panel developed expert opinion-based suggestions using a modified Delphi process. The panel did not include pediatrics as a separate special population because pediatrics issues are embedded in each consensus document. Fourteen suggestions were formulated regarding the care of critically ill and injured patients from special populations during pandemics and disasters. The suggestions cover the following areas: defining special populations for mass critical care, special population planning, planning for access to regionalized service for special populations, triage and resource allocation of special populations, therapeutic considerations, and crisis standards of care for special populations. Chronically ill, technologically dependent, and complex critically ill patients present a unique challenge to preparing and implementing mass critical care. There are, however, unique opportunities to engage patients, primary physicians, advocacy groups, and professional organizations to lessen the impact of disaster on these special populations.

Workshop on Critical Issues in Microgravity Fluids, Transport, and Reaction Processes in Advanced Human Support Technology

NASA Technical Reports Server (NTRS)

Chiaramonte, Francis P.; Joshi, Jitendra A.

2004-01-01

This workshop was designed to bring the experts from the Advanced Human Support Technologies communities together to identify the most pressing and fruitful areas of research where success hinges on collaborative research between the two communities. Thus an effort was made to bring together experts in both advanced human support technologies and microgravity fluids, transport and reaction processes. Expertise was drawn from academia, national laboratories, and the federal government. The intent was to bring about a thorough exchange of ideas and develop recommendations to address the significant open design and operation issues for human support systems that are affected by fluid physics, transport and reaction processes. This report provides a summary of key discussions, findings, and recommendations.

A Vision of Quantitative Imaging Technology for Validation of Advanced Flight Technologies

NASA Technical Reports Server (NTRS)

Horvath, Thomas J.; Kerns, Robert V.; Jones, Kenneth M.; Grinstead, Jay H.; Schwartz, Richard J.; Gibson, David M.; Taylor, Jeff C.; Tack, Steve; Dantowitz, Ronald F.

2011-01-01

Flight-testing is traditionally an expensive but critical element in the development and ultimate validation and certification of technologies destined for future operational capabilities. Measurements obtained in relevant flight environments also provide unique opportunities to observe flow phenomenon that are often beyond the capabilities of ground testing facilities and computational tools to simulate or duplicate. However, the challenges of minimizing vehicle weight and internal complexity as well as instrumentation bandwidth limitations often restrict the ability to make high-density, in-situ measurements with discrete sensors. Remote imaging offers a potential opportunity to noninvasively obtain such flight data in a complementary fashion. The NASA Hypersonic Thermodynamic Infrared Measurements Project has demonstrated such a capability to obtain calibrated thermal imagery on a hypersonic vehicle in flight. Through the application of existing and accessible technologies, the acreage surface temperature of the Shuttle lower surface was measured during reentry. Future hypersonic cruise vehicles, launcher configurations and reentry vehicles will, however, challenge current remote imaging capability. As NASA embarks on the design and deployment of a new Space Launch System architecture for access beyond earth orbit (and the commercial sector focused on low earth orbit), an opportunity exists to implement an imagery system and its supporting infrastructure that provides sufficient flexibility to incorporate changing technology to address the future needs of the flight test community. A long term vision is offered that supports the application of advanced multi-waveband sensing technology to aid in the development of future aerospace systems and critical technologies to enable highly responsive vehicle operations across the aerospace continuum, spanning launch, reusable space access and global reach. Motivations for development of an Agency level imagery

History of technology in the intensive care unit.

PubMed

Puri, Nitin; Puri, Vinod; Dellinger, R P

2009-01-01

Critical care medicine is a young specialty and since its inception has been heavily reliant upon technology. Invasive monitoring has its humble beginnings in the continuous monitoring of heart rate and rhythm. From the development of right heart catheterization to the adaption of the echocardiogram for use in shock, intensivists have used technology to monitor hemodynamics. The care of the critically ill has been buoyed by investigators who sought to offer renal replacement therapy to unstable patients and worked to improve the monitoring of oxygen saturation. The evolution of mechanical ventilation for the critically ill embodies innumerable technological advances. More recently, critical care has insisted upon rigorous testing and cost-benefit analysis of technological advances.

Lost and misplaced items and assistive devices in nursing homes: Identifying problems and technological opportunities through participatory design research.

PubMed

Oude Weernink, C E; Sweegers, L; Relou, L; van der Zijpp, T J; van Hoof, J

2018-02-06

Modern healthcare, including nursing home care, goes together with the use of technologies to support treatment, the provision of care and daily activities. The challenges concerning the implementation of such technologies are numerous. One of these emerging technologies are location technologies (RTLS or Real-Time Location Systems). that can be utilized in the nursing home for monitoring the use and location of assets. This paper describes a participatory design study of RTLS based on context mapping, conducted in two nursing home organizations. Rather than investigating the technological possibilities, this study investigates the needs and wishes from the perspective of the care professional. The study identified semantic themes that relate to the practicalities of lost and misplaced items in the nursing home, as well as latent themes that cover the wishes regarding technology in the nursing homes. The organizational culture and building typology may play a role in losing items. The participants in this study indicated that RTLS can provide a solution to some of the challenges that they encounter in the workplace. However, the implementation of new technologies should be done with care and should be integrated into existing ICT systems in order to minimize additional training and posing a burden on the workload.

Lost and misplaced items and assistive devices in nursing homes: Identifying problems and technological opportunities through participatory design research

PubMed Central

Oude Weernink, C.E.; Sweegers, L.; Relou, L.; van der Zijpp, T.J.; van Hoof, J.

2018-01-01

INTRODUCTION: Modern healthcare, including nursing home care, goes together with the use of technologies to support treatment, the provision of care and daily activities. The challenges concerning the implementation of such technologies are numerous. One of these emerging technologies are location technologies (RTLS or Real-Time Location Systems). that can be utilized in the nursing home for monitoring the use and location of assets. METHODOLOGY: This paper describes a participatory design study of RTLS based on context mapping, conducted in two nursing home organizations. Rather than investigating the technological possibilities, this study investigates the needs and wishes from the perspective of the care professional. RESULTS: The study identified semantic themes that relate to the practicalities of lost and misplaced items in the nursing home, as well as latent themes that cover the wishes regarding technology in the nursing homes. The organizational culture and building typology may play a role in losing items. CONCLUSION: The participants in this study indicated that RTLS can provide a solution to some of the challenges that they encounter in the workplace. However, the implementation of new technologies should be done with care and should be integrated into existing ICT systems in order to minimize additional training and posing a burden on the workload. PMID:29527110

Homeland security: sharing and managing critical incident information

NASA Astrophysics Data System (ADS)

Ashley, W. R., III

2003-09-01

Effective critical incident response for homeland security requires access to real-time information from many organizations. Command and control, as well as basic situational awareness, are all dependant on quickly communicating a dynamically changing picture to a variety of decision makers. For the most part, critical information management is not unfamiliar or new to the public safety community. However, new challenges present themselves when that information needs to be seamlessly shared across multiple organizations at the local, state and federal level in real-time. The homeland security problem does not lend itself to the traditional military joint forces planning model where activities shift from a deliberate planning process to a crisis action planning process. Rather, the homeland security problem is more similar to a traditional public safety model where the current activity state moves from complete inactivity or low-level attention to immediate crisis action planning. More often than not the escalation occurs with no warning or baseline information. This paper addresses the challenges of sharing critical incident information and the impacts new technologies will have on this problem. The value of current and proposed approaches will be critiqued for operational value and areas will be identified for further development.

Conceptual and empirical themes regarding the design of technology transfer programs : a review of wood utilization research in the United States

Treesearch

Paul V. Ellefson; Michael A. Kilgore; Kenneth E. Skog; Christopher D. Risbrudt

2011-01-01

Transfer of technologies produced by research is critical to innovation within all organizations. The intent of this paper is to take stock of the conceptual underpinnings of technology transfer processes as they relate to wood utilization research and to identify conditions that promote the successful transfer of research results. Conceptually, research utilization...

JSC research and technology

NASA Technical Reports Server (NTRS)

1993-01-01

The primary roles and missions of JSC incorporate all aspects of human presence in space. Therefore, the Center is involved in the development of technology that will allow humans to stay longer in Earth orbit, allow safe flight in space, and provide capabilities to explore the Moon and Mars. The Center's technology emphasis areas include human spacecraft development, human support systems and infrastructure, and human spacecraft operations. Safety and reliability are critical requirements for the technologies that JSC pursues for long-duration use in space. One of the objectives of technology development at the Center is to give employees the opportunity to enhance their technological expertise and project management skills by defining, designing, and developing projects that are vital to the Center's strategy for the future. This report is intended to communicate within and outside the Agency our research and technology (R&T) accomplishments, as well as inform Headquarters program managers and their constituents of the significant accomplishments that have promise for future Agency programs. While not inclusive of all R&T efforts, the report presents a comprehensive summary of JSC projects in which substantial progress was made in the 1992 fiscal year. At the beginning of each project description, names of the Principal Investigator (PI) and the Technical Monitor (TM) are given, followed by their JSC mail codes or their company or university affiliations. The funding sources and technology focal points are identified in the index.

Intermediality: Bridge to Critical Media Literacy.

ERIC Educational Resources Information Center

Pailliotet, Ann Watts; Semali, Ladislaus; Rodenberg, Rita K.; Giles, Jackie K.; Macaul, Sherry L.

2000-01-01

Defines "intermediality" as the ability to critically read and write with and across varied symbol systems. Relates it to critical media literacy. Offers rationales for teaching critical media literacy in general, and intermedial instruction in particular. Identifies seven guiding intermedial elements: theory, texts, processes, contexts,…

Increasing the Capacity of Primary Care Through Enabling Technology.

PubMed

Young, Heather M; Nesbitt, Thomas S

2017-04-01

Primary care is the foundation of effective and high-quality health care. The role of primary care clinicians has expanded to encompass coordination of care across multiple providers and management of more patients with complex conditions. Enabling technology has the potential to expand the capacity for primary care clinicians to provide integrated, accessible care that channels expertise to the patient and brings specialty consultations into the primary care clinic. Furthermore, technology offers opportunities to engage patients in advancing their health through improved communication and enhanced self-management of chronic conditions. This paper describes enabling technologies in four domains (the body, the home, the community, and the primary care clinic) that can support the critical role primary care clinicians play in the health care system. It also identifies challenges to incorporating these technologies into primary care clinics, care processes, and workflow.

Learning through Information Communication Technology: Critical Perspectives

ERIC Educational Resources Information Center

Severinsen, G.

2003-01-01

Technology in secondary schools has become of increasing interest as the power of the microchip has developed. For the students of Mathematics, computers and handheld graphic calculators need to be accessible to all. They are relevant to the needs of the students' courses and to support and develop their Mathematical learning (Smith, 1997).…

Critical Thresholds in Earth-System Dynamics

NASA Astrophysics Data System (ADS)

Rothman, D.

2017-12-01

The history of the Earth system is a story of change. Some changesare gradual and benign, but others, especially those associated withcatastrophic mass extinction, are relatively abrupt and destructive.What sets one group apart from the other? Here I hypothesize thatperturbations of Earth's carbon cycle lead to mass extinction if theyexceed either a critical rate at long time scales or a critical sizeat short time scales. By analyzing 31 carbon-isotopic events duringthe last 542 million years, I identify the critical rate with a limitimposed by mass conservation. Further analysis identifies thecrossover timescale separating fast from slow events with thetimescale of the ocean's homeostatic response to a change in pH. Theproduct of the critical rate and the crossover timescale then yieldsthe critical size. The modern critical size for the marine carboncycle is roughly similar to the mass of carbon that human activitieswill likely have added to the oceans by the year 2100.

Finding the Needle in the Haystack-the Use of Microfluidic Droplet Technology to Identify Vitamin-Secreting Lactic Acid Bacteria.

PubMed

Chen, Jun; Vestergaard, Mike; Jensen, Thomas Glasdam; Shen, Jing; Dufva, Martin; Solem, Christian; Jensen, Peter Ruhdal

2017-05-30