49 CFR 572.180 - Incorporated materials.

Code of Federal Regulations, 2014 CFR

2014-10-01

... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) ANTHROPOMORPHIC TEST DEVICES ES-2re Side Impact Crash... 50th Percentile Adult Male Side Impact Crash Test Dummy, February 2008,” incorporated by reference in...

Crash energy management : one- and two-car passenger rail impact tests - summary of structural and occupant test results

DOT National Transportation Integrated Search

2016-12-01

Two full-scale impact tests were conducted to measure the crashworthiness performance of Crash Energy Management (CEM) equipped passenger rail cars. On December 3, 2003, a single car impacted a fixed barrier at approximately 35 mph and on February 26...

Impact test of a crash-energy management passenger rail car

DOT National Transportation Integrated Search

2004-04-06

On December 3, 2003, a single-car impact test was : conducted to assess the crashworthiness performance of a : modified passenger rail car. A coach car retrofitted with a : Crash Energy Management (CEM) end structure impacted a : fixed barrier at app...

Calibration of Airframe and Occupant Models for Two Full-Scale Rotorcraft Crash Tests

NASA Technical Reports Server (NTRS)

Annett, Martin S.; Horta, Lucas G.; Polanco, Michael A.

2012-01-01

Two full-scale crash tests of an MD-500 helicopter were conducted in 2009 and 2010 at NASA Langley's Landing and Impact Research Facility in support of NASA s Subsonic Rotary Wing Crashworthiness Project. The first crash test was conducted to evaluate the performance of an externally mounted composite deployable energy absorber under combined impact conditions. In the second crash test, the energy absorber was removed to establish baseline loads that are regarded as severe but survivable. Accelerations and kinematic data collected from the crash tests were compared to a system integrated finite element model of the test article. Results from 19 accelerometers placed throughout the airframe were compared to finite element model responses. The model developed for the purposes of predicting acceleration responses from the first crash test was inadequate when evaluating more severe conditions seen in the second crash test. A newly developed model calibration approach that includes uncertainty estimation, parameter sensitivity, impact shape orthogonality, and numerical optimization was used to calibrate model results for the second full-scale crash test. This combination of heuristic and quantitative methods was used to identify modeling deficiencies, evaluate parameter importance, and propose required model changes. It is shown that the multi-dimensional calibration techniques presented here are particularly effective in identifying model adequacy. Acceleration results for the calibrated model were compared to test results and the original model results. There was a noticeable improvement in the pilot and co-pilot region, a slight improvement in the occupant model response, and an over-stiffening effect in the passenger region. This approach should be adopted early on, in combination with the building-block approaches that are customarily used, for model development and test planning guidance. Complete crash simulations with validated finite element models can be used to satisfy crash certification requirements, thereby reducing overall development costs.

TRACT 2 Frame Drop Test AT NASA Langley Research Center's Landin

NASA Image and Video Library

2014-05-09

(Tract)2 Transport Rotorcraft Airframe Crash Testbed; Full Frame Drop Test: rotary wing crash worthiness, impact research at NASA Langley Research Center's Landing and Impact Research (LandIR) Facility Building 1297

Impact tests of crash energy management passenger rail cars: analysis and structural measurements

DOT National Transportation Integrated Search

2004-11-13

Two full-scale impact tests were conducted to measure the : crashworthiness performance of Crash Energy Management : (CEM) passenger rail cars. On December 3, 2003 a single car : impacted a fixed barrier at approximately 35 mph and on : February 26, ...

Preparations for a train-to-train impact test of crash-energy management passenger rail equipment

DOT National Transportation Integrated Search

2005-03-16

Preparations are ongoing for a full-scale train-to-train : impact test of crash-energy management (CEM) equipment, : during which a cab car-led passenger consist, initially moving : at 30 mph, will impact a standing locomotive-led consist. The : coll...

System-Integrated Finite Element Analysis of a Full-Scale Helicopter Crash Test with Deployable Energy Absorbers

NASA Technical Reports Server (NTRS)

Annett, Martin S.; Polanco, Michael A.

2010-01-01

A full-scale crash test of an MD-500 helicopter was conducted in December 2009 at NASA Langley's Landing and Impact Research facility (LandIR). The MD-500 helicopter was fitted with a composite honeycomb Deployable Energy Absorber (DEA) and tested under vertical and horizontal impact velocities of 26-ft/sec and 40-ft/sec, respectively. The objectives of the test were to evaluate the performance of the DEA concept under realistic crash conditions and to generate test data for validation of a system integrated finite element model. In preparation for the full-scale crash test, a series of sub-scale and MD-500 mass simulator tests was conducted to evaluate the impact performances of various components, including a new crush tube and the DEA blocks. Parameters defined within the system integrated finite element model were determined from these tests. The objective of this paper is to summarize the finite element models developed and analyses performed, beginning with pre-test predictions and continuing through post-test validation.

LS-DYNA Analysis of a Full-Scale Helicopter Crash Test

NASA Technical Reports Server (NTRS)

Annett, Martin S.

2010-01-01

A full-scale crash test of an MD-500 helicopter was conducted in December 2009 at NASA Langley's Landing and Impact Research facility (LandIR). The MD-500 helicopter was fitted with a composite honeycomb Deployable Energy Absorber (DEA) and tested under vertical and horizontal impact velocities of 26 ft/sec and 40 ft/sec, respectively. The objectives of the test were to evaluate the performance of the DEA concept under realistic crash conditions and to generate test data for validation of a system integrated LS-DYNA finite element model. In preparation for the full-scale crash test, a series of sub-scale and MD-500 mass simulator tests was conducted to evaluate the impact performances of various components, including a new crush tube and the DEA blocks. Parameters defined within the system integrated finite element model were determined from these tests. The objective of this paper is to summarize the finite element models developed and analyses performed, beginning with pre-test and continuing through post test validation.

Soil analyses and evaluations at the impact dynamics research facility for two full-scale aircraft crash tests

NASA Technical Reports Server (NTRS)

Cheng, R. Y. K.

1977-01-01

The aircraft structural crash behavior and occupant survivability for aircraft crashes on a soil surface was studied. The results of placement, compaction, and maintenance of two soil test beds are presented. The crators formed by the aircraft after each test are described.

A History of Full-Scale Aircraft and Rotorcraft Crash Testing and Simulation at NASA Langley Research Center

NASA Technical Reports Server (NTRS)

Jackson, Karen E.; Boitnott, Richard L.; Fasanella, Edwin L.; Jones, Lisa E.; Lyle, Karen H.

2004-01-01

This paper summarizes 2-1/2 decades of full-scale aircraft and rotorcraft crash testing performed at the Impact Dynamics Research Facility (IDRF) located at NASA Langley Research Center in Hampton, Virginia. The IDRF is a 240-ft.-high steel gantry that was built originally as a lunar landing simulator facility in the early 1960's. It was converted into a full-scale crash test facility for light aircraft and rotorcraft in the early 1970 s. Since the first full-scale crash test was preformed in February 1974, the IDRF has been used to conduct: 41 full-scale crash tests of General Aviation (GA) aircraft including landmark studies to establish baseline crash performance data for metallic and composite GA aircraft; 11 full-scale crash tests of helicopters including crash qualification tests of the Bell and Sikorsky Advanced Composite Airframe Program (ACAP) prototypes; 48 Wire Strike Protection System (WSPS) qualification tests of Army helicopters; 3 vertical drop tests of Boeing 707 transport aircraft fuselage sections; and, 60+ crash tests of the F-111 crew escape module. For some of these tests, nonlinear transient dynamic codes were utilized to simulate the impact response of the airframe. These simulations were performed to evaluate the capabilities of the analytical tools, as well as to validate the models through test-analysis correlation. In September 2003, NASA Langley closed the IDRF facility and plans are underway to demolish it in 2007. Consequently, it is important to document the contributions made to improve the crashworthiness of light aircraft and rotorcraft achieved through full-scale crash testing and simulation at the IDRF.

Computer simulations and experimental study on crash box of automobile in low speed collision

NASA Astrophysics Data System (ADS)

Liu, Yanjie; Ding, Lin; Yan, Shengyuan; Yang, Yongsheng

2008-11-01

Based on the problems of energy-absorbing components in the automobile low speed collision process, according to crash box frontal crash test in low speed as the example, the simulation analysis of crash box impact process was carried out by Hyper Mesh and LS-DYNA. Each parameter on the influence modeling was analyzed by mathematics analytical solution and test comparison, which guaranteed that the model was accurate. Combination of experiment and simulation result had determined the weakness part of crash box structure crashworthiness aspect, and improvement method of crash box crashworthiness was discussed. Through numerical simulation of the impact process of automobile crash box, the obtained analysis result was used to optimize the design of crash box. It was helpful to improve the vehicles structure and decrease the collision accident loss at most. And it was also provided a useful method for the further research on the automobile collision.

Validation of the ENSCO surrogate bogie vehicle, FOIL test numbers 92F028 through 92F031

DOT National Transportation Integrated Search

1994-11-01

This document contains the results from four crash tests conducted at the Federal Outdoor Impact Laboratory (FOIL) located at the Turner-Fairbank Highway Research Center in McLean, Virginia. The crash tests involved two reusable bogie vehicles impact...

Severe injury in multiple impacts: Analysis of 1997-2015 NASS-CDS.

PubMed

Viano, David C; Parenteau, Chantal S

2018-07-04

This is a descriptive study of the incidence and risk for severe injury in single-impact and multi-impact crashes by belt use and crash type using NASS-CDS. 1997-2015 NASS-CDS data were used to determine the distribution of crashes by the number of impacts and severe injury (Maximum Abbreviated Injury Score [MAIS] 4+F) to >15-year-old nonejected drivers by seat belt use in 1997+ MY vehicles. It compares the risk for severe injury in a single impact and in crashes involving 2, 3, or 4+ impacts in the collision with a focus on a frontal crash followed by other impacts. Most vehicle crashes involve a single impact (75.4% of 44,889,518 vehicles), followed by 2-impact crashes (19.6%), 3-impact crashes (5.0%) and 4+ impacts (2.6%). For lap-shoulder-belted drivers, the distribution of severe injury was 42.1% in a single impact, 29.3% in 2 impacts, 13.4% in 3 impacts, and 15.1% in 4+ impact crashes. The risk for a belted driver was 0.256 ± 0.031% in a single impact, 0.564 ± 0.079% in 2 impacts, 0.880 ± 0.125% in 3 impacts, and 2.121 ± 0.646% in 4+ impact. The increase in risk from a single crash to multi-impact collisions was statistically significant (P < .001). In a single impact, 53.8% of belted drivers were in a frontal crashes, 22.4% in side crashes, 20% in rear crashes, and 1.7% in rollover crashes. The risk for severe injury was highest in a rollover at 0.677 ± 0.250%, followed by near-side impact at 0.467 ± 0.084% and far-side impact at 0.237 ± 0.071%. Seat belt use was 82.4% effective in preventing severe injury (MAIS 4+F) in a rollover, 47.9% in a near-side impact, and 74.8% in a far-side impact. In 2-impact crashes with a belted driver, the most common sequence was a rear impact followed by a frontal crash at 1,843,506 (21.5%) with a risk for severe injury of 0.100 ± 0.058%. The second most common was a frontal impact followed by another frontal crash at 1,257,264 (14.7%) with a risk of 0.401 ± 0.057%. The risk was 0.658 ± 0.271% in a frontal impact followed by a rear impact. A near-side impact followed by a rear crash had the highest risk for severe injury at 2.073 ± 1.322%. Restraint systems are generally developed for a single crash or sled test. The risk for severe injury was significantly higher in 2-, 3-, and 4+-impact crashes than a single impact. The majority (57.9%) of severe injuries occurred in multi-impact crashes with belted drivers. The evaluation of restraint performance warrants additional study in multi-impact crashes.

Light airplane crash tests at impact velocities of 13 and 27 m/sec

NASA Technical Reports Server (NTRS)

Alfaro-Bou, E.; Vaughan, V. L., Jr.

1977-01-01

Two similar general aviation airplanes were crash tested at the Langley impact dynamics research facility at velocities of 13 and 27 m/sec. Other flight parameters were held constant. The facility, instrumentation, tests specimens, and test method are briefly described. Structural damage and accelerometer data are discussed.

Testing of state roadside safety systems. Volume XI, Appendix J -- Crash testing and evaluation of existing guardrail systems

DOT National Transportation Integrated Search

1999-04-01

The purpose of this study is to crash test and evaluate new or modified roadside safety hardware and, where necessary, redesign the devices to improve their impact performance. The three major areas addressed in this study are the impact performance ...

Train-to-Train Impact Test of Crash-Energy Management Passenger Rail Equipment: Occupant Experiments

DOT National Transportation Integrated Search

2006-11-06

As part of an ongoing passenger rail crashworthiness effort, : a full-scale impact test of a train with crash energy management : (CEM) passenger cars was conducted on March 23, 2006. In : this test, a train made up of a CEM cab car, four CEM coach :...

Experimental Photogrammetric Techniques Used on Five Full-Scale Aircraft Crash Tests

NASA Technical Reports Server (NTRS)

Littell, Justin D.

2016-01-01

Between 2013 and 2015, full-scale crash tests were conducted on five aircraft at the Landing and Impact Research Facility (LandIR) at NASA Langley Research Center (LaRC). Two tests were conducted on CH-46E airframes as part of the Transport Rotorcraft Airframe Crash Testbed (TRACT) project, and three tests were conduced on Cessna 172 aircraft as part of the Emergency Locator Transmitter Survivability and Reliability (ELTSAR) project. Each test served to evaluate a variety of crashworthy systems including: seats, occupants, restraints, composite energy absorbing structures, and Emergency Locator Transmitters. As part of each test, the aircraft were outfitted with a variety of internal and external cameras that were focused on unique aspects of the crash event. A subset of three camera was solely used in the acquisition of photogrammetric test data. Examples of this data range from simple two-dimensional marker tracking for the determination of aircraft impact conditions to entire full-scale airframe deformation to markerless tracking of Anthropomorphic Test Devices (ATDs, a.k.a. crash test dummies) during the crash event. This report describes and discusses the techniques used and implications resulting from the photogrammetric data acquired from each of the five tests.

Protection against head injuries should not be optional: a case for mandatory installation of side-curtain air bags.

PubMed

Stuke, Lance E; Nirula, Raminder; Gentilello, Larry M; Shafi, Shahid

2010-10-01

More than 9,000 vehicle occupants die each year in side-impact vehicle collisions, primarily from head injuries. The authors hypothesized that side-curtain air bags significantly improve head and neck safety in side-impact crash testing. Side-impact crash-test data were obtained from the Insurance Institute for Highway Safety, which ranks occupant protection as good, acceptable, marginal, or poor. Vehicles of the same make and model that underwent side-impact crash testing both with and without side-curtain air bags were compared, as well as the protective effect of these air bags on occupants' risk for head and neck injury. Of all the passenger vehicles, 25 models have undergone side-impact crash testing with and without side-curtain air bags by the Insurance Institute for Highway Safety. Only 3 models without side-curtain air bags (12%) provided good head and neck protection for drivers, while 21 cars with side-curtain air bags (84%) provided good protection (P < .001). For rear passengers, the added protection from side-curtain air bags was less dramatic but significant (84% without vs 100% with side-curtain air bags, P = .04). Side-curtain air bags significantly improve vehicle occupant safety in side-impact crash tests. Installation of these air bags should be federally mandated in all passenger vehicles. Copyright © 2010 Elsevier Inc. All rights reserved.

Safety impact of an integrated crash warning system based on field test data.

DOT National Transportation Integrated Search

2011-06-13

This paper provides the results of an analysis : conducted to assess the safety impact of an integrated : vehicle-based crash warning system based on : naturalistic driving data collected from a field : operational test. The system incorporates four ...

Solutions for acceleration measurement in vehicle crash tests

NASA Astrophysics Data System (ADS)

Dima, D. S.; Covaciu, D.

2017-10-01

Crash tests are useful for validating computer simulations of road traffic accidents. One of the most important parameters measured is the acceleration. The evolution of acceleration versus time, during a crash test, form a crash pulse. The correctness of the crash pulse determination depends on the data acquisition system used. Recommendations regarding the instrumentation for impact tests are given in standards, which are focused on the use of accelerometers as impact sensors. The goal of this paper is to present the device and software developed by authors for data acquisition and processing. The system includes two accelerometers with different input ranges, a processing unit based on a 32-bit microcontroller and a data logging unit with SD card. Data collected on card, as text files, is processed with a dedicated software running on personal computers. The processing is based on diagrams and includes the digital filters recommended in standards.

Ford Festiva center impacts with a narrow fixed object (rigid pole) : resource materials

DOT National Transportation Integrated Search

1995-08-01

This document contains the results from five crash tests conducted at the Federal Outdoor Impact Laboratory (FOIL) located at the Turner-Fairbank Highway Research Center in McLean, Virginia. The crash tests involved five Ford Festiva two-door sedans,...

Crash Tests of Work Zone Traffic Control Devices

DOT National Transportation Integrated Search

1990-02-01

Full-scale vehicle crash tests evaluated performance of typical work zone traffic control devices. Modified test procedures and evaluation criteria from NCHRP Report 230 were used in 108 tests, providing significant insight into impact performance. P...

Response of DP 600 products to dynamic impact loads

NASA Astrophysics Data System (ADS)

Clark, Deidra Darcell

The objective of this study was to compare the microstructural response of various DP 600 products subjected to low velocity, dynamic impact tests, typically encountered in a car crash. Since the response of steel is sensitive to its microstructure as controlled by the alloying elements, phase content, and processing; various DP 600 products may respond differently to crashes. The microstructure before and after dynamic impact deformation at 5 and 10 mph was characterized with regards to grain size, morphology, and phase content among vendors A, B, and C to evaluate efficiency in absorbing energy mechanisms during a crash simulated by dynamic impact testing in a drop tower.

Crash Test of Three Cessna 172 Aircraft at NASA Langley Research Center's Landing and Impact Research Facility

NASA Technical Reports Server (NTRS)

Littell, Justin D.

2015-01-01

During the summer of 2015, three Cessna 172 aircraft were crash tested at the Landing and Impact Research Facility (LandIR) at NASA Langley Research Center (LaRC). The three tests simulated three different crash scenarios. The first simulated a flare-to-stall emergency or hard landing onto a rigid surface such as a road or runway, the second simulated a controlled flight into terrain with a nose down pitch on the aircraft, and the third simulated a controlled flight into terrain with an attempt to unsuccessfully recover the aircraft immediately prior to impact, resulting in a tail strike condition. An on-board data acquisition system captured 64 channels of airframe acceleration, along with acceleration and load in two onboard Hybrid II 50th percentile Anthropomorphic Test Devices, representing the pilot and co-pilot. Each test contained different airframe loading conditions and results show large differences in airframe performance. This paper presents test methods used to conduct the crash tests and will summarize the airframe results from the test series.

Repeatability study of replicate crash tests: A signal analysis approach.

PubMed

Seppi, Jeremy; Toczyski, Jacek; Crandall, Jeff R; Kerrigan, Jason

2017-10-03

To provide an objective basis on which to evaluate the repeatability of vehicle crash test methods, a recently developed signal analysis method was used to evaluate correlation of sensor time history data between replicate vehicle crash tests. The goal of this study was to evaluate the repeatability of rollover crash tests performed with the Dynamic Rollover Test System (DRoTS) relative to other vehicle crash test methods. Test data from DRoTS tests, deceleration rollover sled (DRS) tests, frontal crash tests, frontal offset crash tests, small overlap crash tests, small overlap impact (SOI) crash tests, and oblique crash tests were obtained from the literature and publicly available databases (the NHTSA vehicle database and the Insurance Institute for Highway Safety TechData) to examine crash test repeatability. Signal analysis of the DRoTS tests showed that force and deformation time histories had good to excellent repeatability, whereas vehicle kinematics showed only fair repeatability due to the vehicle mounting method for one pair of tests and slightly dissimilar mass properties (2.2%) in a second pair of tests. Relative to the DRS, the DRoTS tests showed very similar or higher levels of repeatability in nearly all vehicle kinematic data signals with the exception of global X' (road direction of travel) velocity and displacement due to the functionality of the DRoTS fixture. Based on the average overall scoring metric of the dominant acceleration, DRoTS was found to be as repeatable as all other crash tests analyzed. Vertical force measures showed good repeatability and were on par with frontal crash barrier forces. Dynamic deformation measures showed good to excellent repeatability as opposed to poor repeatability seen in SOI and oblique deformation measures. Using the signal analysis method as outlined in this article, the DRoTS was shown to have the same or better repeatability of crash test methods used in government regulatory and consumer evaluation test protocols.

Full-Scale Crash Test of a MD-500 Helicopter with Deployable Energy Absorbers

NASA Technical Reports Server (NTRS)

Kellas, Sotiris; Jackson, Karen E.; Littell, Justin D.

2010-01-01

A new externally deployable energy absorbing system was demonstrated during a full-scale crash test of an MD-500 helicopter. The deployable system is a honeycomb structure and utilizes composite materials in its construction. A set of two Deployable Energy Absorbers (DEAs) were fitted on the MD-500 helicopter for the full-scale crash demonstration. Four anthropomorphic dummy occupants were also used to assess human survivability. A demonstration test was performed at NASA Langley's Landing and Impact Research Facility (LandIR). The test involved impacting the helicopter on a concrete surface with combined forward and vertical velocity components of 40-ft/s and 26-ft/s, respectively. The objectives of the test were to evaluate the performance of the DEA concept under realistic crash conditions and to generate test data for validation of dynamic finite element simulations. Descriptions of this test as well as other component and full-scale tests leading to the helicopter test are discussed. Acceleration data from the anthropomorphic dummies showed that dynamic loads were successfully attenuated to within non-injurious levels. Moreover, the airframe itself survived the relatively severe impact and was retested to provide baseline data for comparison for cases with and without DEAs.

Patterns of severe injury in pediatric car crash victims: Crash Injury Research Engineering Network database.

PubMed

Brown, J Kristine; Jing, Yuezhou; Wang, Stewart; Ehrlich, Peter F

2006-02-01

Motor vehicle crashes (MVCs) account for 50% of pediatric trauma. Safety improvements are typically tested with child crash dummies using an in vitro model. The Crash Injury Research Engineering Network (CIREN) provides an in vivo validation process. Previous research suggest that children in lateral crashes or front-seat locations have higher Injury Severity Scale scores and lower Glasgow Coma Scale scores than those in frontal-impact crashes. However, specific injury patterns and crash characteristics have not been characterized. Data were collected from the CIREN multidisciplinary crash reconstruction network (10 pediatric trauma centers). Injuries were examined with regard to crash direction (frontal/lateral), restraint use, seat location, and change in velocity at impact (DeltaV). Injuries were limited to Abbreviated Injury Scale (AIS) scores of 3 or higher and included head, thoracic, abdominal, pelvic, spine, and long bone (orthopedic) injuries. Standard age groupings (0-4, 5-9, 10-14, and 15-18 years) were used. Statistical analyses used Fisher's Exact test and multiple logistic regressions. Four hundred seventeen MVCs with 2500 injuries were analyzed (males = 219, females = 198). Controlling for DeltaV and age, children in lateral-impact crashes (n = 232) were significantly more likely to suffer severe injuries to the head and thorax as compared with children in frontal crashes (n = 185), who were more likely to suffer severe spine and orthopedic injuries. Children in a front-seat (n = 236) vs those in a back-seat (n = 169) position had more injuries to the thoracic (27% vs 17%), abdominal (21% vs 13%), pelvic (11% vs 1%), and orthopedic (28% vs 10%) regions (P < .05 for all). Seat belts were protective for pelvic (5% vs 12% unbelted) and orthopedic (15% vs 40%) injuries (odds ratio = 3, P < .01 for both). A reproducible pattern of injury is noted for children involved in lateral-impact crashes characterized by head and chest injuries. The Injury Severity Scale scores were higher for children in front-seat positions. Increased lateral-impact safety measures such as mandatory side curtain airbags may decrease morbidity. Furthermore, continued public education for positioning children in the back seat of cars is warranted.

Occurrence of serious injury in real-world side impacts of vehicles with good side-impact protection ratings.

PubMed

Brumbelow, Matthew L; Mueller, Becky C; Arbelaez, Raul A

2015-01-01

The Insurance Institute for Highway Safety (IIHS) introduced its side impact consumer information test program in 2003. Since that time, side airbags and structural improvements have been implemented across the fleet and the proportion of good ratings has increased to 93% of 2012-2014 model year vehicles. Research has shown that drivers of good-rated vehicles are 70% less likely to die in a left-side crash than drivers of poor-rated vehicles. Despite these improvements, side impact fatalities accounted for about one quarter of passenger vehicle occupant fatalities in 2012. This study is a detailed analysis of real-world cases with serious injury resulting from side crashes of vehicles with good ratings in the IIHS side impact test. NASS-CDS and Crash Injury Research and Engineering Network (CIREN) were queried for occupants of good-rated vehicles who sustained an Abbreviated Injury Scale (AIS) ≥ 3 injury in a side-impact crash. The resulting 110 cases were categorized by impact configuration and other factors that contributed to injury. Patterns of impact configuration, restraint performance, and occupant injury were identified and discussed in the context of potential upgrades to the current IIHS side impact test. Three quarters of the injured occupants were involved in near-side impacts. For these occupants, the most common factors contributing to injury were crash severities greater than the IIHS test, inadequate side-airbag performance, and lack of side-airbag coverage for the injured body region. In the cases where an airbag was present but did not prevent the injury, occupants were often exposed to loading centered farther forward on the vehicle than in the IIHS test. Around 40% of the far-side occupants were injured from contact with the struck-side interior structure, and almost all of these cases were more severe than the IIHS test. The remaining far-side occupants were mostly elderly and sustained injury from the center console, instrument panel, or seat belt. In addition, many far-side occupants were likely out of position due to events preceding the side impact and/or being unbelted. Individual changes to the IIHS side impact test have the potential to reduce the number of serious injuries in real-world crashes. These include impacting the vehicle farther forward (relevant to 28% of all cases studied), greater test severity (17%), the inclusion of far-side occupants (9%), and more restrictive injury criteria (9%). Combinations of these changes could be more effective.

Multiscale Analysis of Open-Cell Aluminum Foam for Impact Energy Absorption

NASA Astrophysics Data System (ADS)

Kim, Ji Hoon; Kim, Daeyong; Lee, Myoung-Gyu; Lee, Jong Kook

2016-09-01

The energy-absorbing characteristics of crash members in automotive collision play an important role in controlling the amount of damage to the passenger compartment. Aluminum foams have high strength-to-weight ratio and high deformability, thus good crashworthiness is expected while maintaining or even saving weights when foams are implemented in crash members. In order to investigate the effect of the open-cell aluminum foam fillers on impact performance and weight saving, a multiscale framework for evaluating the crashworthiness of aluminum foam-filled members is used. To circumvent the difficulties of mechanical tests on foams, a micromechanical model of the aluminum foam is constructed using the x-ray micro tomography and virtual tests are conducted for the micromechanical model to characterize the behavior of the foam. In the macroscale, the aluminum foam is represented by the crushable foam constitutive model, which is then incorporated into the impact test simulation of the foam-filled crash member. The multiscale foam-filled crash member model was validated for the high-speed impact test, which confirms that the material model characterized by the micromechanical approach represents the behavior of the open-cell foam under impact loading well. Finally, the crash member design for maximizing the energy absorption is discussed by investigating various designs from the foam-only structure to the hollow tube structure. It was found that the foam structure absorbs more energy than the hollow tube or foam-filled structure with the same weight.

The RID2 biofidelic rear impact dummy: a pilot study using human subjects in low speed rear impact full scale crash tests.

PubMed

Croft, Arthur C; Philippens, Mathieu M G M

2007-03-01

Human subjects and the recently developed RID2 rear impact crash test dummy were exposed to a series of full scale, vehicle-to-vehicle crash tests. To evaluate the biofidelity of the RID2 anthropometric test dummy on the basis of calculated neck injury criterion (NIC) values by comparing these values to those obtained from human subjects exposed in the very same crashes. The widely used and familiar hybrid III dummy has been said to lack biofidelity in the special application of low speed rear impact crashes. Several attempts have been made to modify this dummy with only marginal success. Two completely new dummies have been developed; the BioRID and the RID2. Neither have been tested under real world crash boundary conditions in side-by-side comparisons with live human subjects. Volunteer subjects, including a 50th percentile male, a 95th percentile male, and a 50th percentile female, were placed in the driver's seat of a vehicle and subjected to a series of three low speed rear impact crashes each. The RID2 dummy, which is modeled after a 50th percentile male, was placed in the passenger seat in each case. Both subjects and dummy were fully instrumented and acceleration-time histories were recorded. From this data, velocities of the heads and torsos were determined and both were used to calculate the NIC values for both crash test subjects and the RID2. The RID2 demonstrated generally higher head accelerations and NIC values than those of the human subjects. Most of the observed variations might be explained on the basis of differing head restraint geometry, posture, and body size. The RID2 NIC values compared most favorably with those of the 50th percentile male subject. For the whole group, the correlations between RID2 and human subjects did not reach statistical significance. The small number of test subjects and crash tests limited the statistical power of this pilot study, and the correlation between the RID2 and human subject NIC values were not statistically significant. The overall qualitative performance and biofidelity of the RID2 was reasonable when compared with the male human 50th percentile subject. Its overall higher ranges of head acceleration and calculated NIC values compared to all of the human subjects were generally consistent. This condition could likely be improved by increasing the stiffness of the RID2 neck. Biofidelic validation of the RID2 will require ongoing testing using a larger number of human subjects and varying boundary conditions. The results of this pilot study, while encouraging, should be considered preliminary.

Crash Testing and Simulation of a Cessna 172 Aircraft: Pitch Down Impact Onto Soft Soil

NASA Technical Reports Server (NTRS)

Fasanella, Edwin L.; Jackson, Karen E.

2016-01-01

During the summer of 2015, NASA Langley Research Center conducted three full-scale crash tests of Cessna 172 (C-172) aircraft at the NASA Langley Landing and Impact Research (LandIR) Facility. The first test represented a flare-to-stall emergency or hard landing onto a rigid surface. The second test, which is the focus of this paper, represented a controlled-flight-into-terrain (CFIT) with a nose-down pitch attitude of the aircraft, which impacted onto soft soil. The third test, also conducted onto soil, represented a CFIT with a nose-up pitch attitude of the aircraft, which resulted in a tail strike condition. These three crash tests were performed for the purpose of evaluating the performance of Emergency Locator Transmitters (ELTs) and to generate impact test data for model validation. LS-DYNA finite element models were generated to simulate the three test conditions. This paper describes the model development and presents test-analysis comparisons of acceleration and velocity time-histories, as well as a comparison of the time sequence of events for Test 2 onto soft soil.

Thoracic Injury Risk as a Function of Crash Severity – Car-to-car Side Impact Tests with WorldSID Compared to Real-life Crashes

PubMed Central

Sunnevång, Cecilia; Rosén, Erik; Boström, Ola; Lechelt, Ulf

2010-01-01

Side airbags reduce the risk of fatal injury by approximately 30%. Due to limited real-life data the risk reducing effect for serious injury has not yet been established. Since side airbags are mainly designed and validated for crash severities used in available test procedures little is known regarding the protective effect when severity increases. The objective of this study was to understand for which crash severities AIS3+ thorax occupant protection in car-to-car nearside collisions need to and can be improved. The aim was fulfilled by means of real life data, for older cars without side airbag, and a series of car-to-car tests performed with the WorldSID 50%-ile in modern and older cars at different impact speeds. The real life data showed that the risk of AIS3+ injury was highest for the thorax followed by the pelvis and head. For both non-senior and senior occupants, most thorax injuries were sustained at lateral delta-v from 20 km/h to 40 km/h. In this severity range, senior occupants were found to have approximately four times higher risk of thoracic injury than non-senior occupants. The crash tests at lateral impact speed 55 km/h (delta-v 32 km/h) confirmed the improved performance at severities represented in current legal and rating tests. The structural integrity of the modern car impacted at 70 km/h showed a potential for improved side impact protection by interior countermeasures. PMID:21050600

Thoracic Injury Risk as a Function of Crash Severity - Car-to-car Side Impact Tests with WorldSID Compared to Real-life Crashes.

PubMed

Sunnevång, Cecilia; Rosén, Erik; Boström, Ola; Lechelt, Ulf

2010-01-01

Side airbags reduce the risk of fatal injury by approximately 30%. Due to limited real-life data the risk reducing effect for serious injury has not yet been established. Since side airbags are mainly designed and validated for crash severities used in available test procedures little is known regarding the protective effect when severity increases.The objective of this study was to understand for which crash severities AIS3+ thorax occupant protection in car-to-car nearside collisions need to and can be improved. The aim was fulfilled by means of real life data, for older cars without side airbag, and a series of car-to-car tests performed with the WorldSID 50%-ile in modern and older cars at different impact speeds.The real life data showed that the risk of AIS3+ injury was highest for the thorax followed by the pelvis and head. For both non-senior and senior occupants, most thorax injuries were sustained at lateral delta-v from 20 km/h to 40 km/h. In this severity range, senior occupants were found to have approximately four times higher risk of thoracic injury than non-senior occupants. The crash tests at lateral impact speed 55 km/h (delta-v 32 km/h) confirmed the improved performance at severities represented in current legal and rating tests. The structural integrity of the modern car impacted at 70 km/h showed a potential for improved side impact protection by interior countermeasures.

Responses of the Q6/Q6s ATD Positioned in Booster Seats in the Far-Side Seat Location of Side Impact Passenger Car and Sled Tests.

PubMed

Tylko, Suzanne; Bohman, Katarina; Bussières, Alain

2015-11-01

Passenger car side impact crash tests and sled tests were conducted to investigate the influence of booster seats, near-side occupant characteristics and vehicle interiors on the responses of the Q6/Q6s child ATD positioned in the rear, far-side seating location. Data from nine side impact sled tests simulating a EuroNCAP AEMD barrier test were analyzed with data obtained from 44 side impact crash tests. The crash tests included: FMVSS 214 and IIHS MDB, moving car-to-stationary car and moving car-to-moving car. A Q6 or prototype Q6s ATD was seated on the far-side, using a variety of low and high back booster seats. Head and chest responses were recorded and ATD motions were tracked with high-speed videos. The vehicle lateral accelerations resulting from MDB tests were characterized by a much earlier and more rapid rise to peak than in tests where the bullet was another car. The near-side seating position was occupied by a Hybrid III 10-year-old ATD in the sled tests, and a rear or front facing child restraint or a 5th percentile side impact ATD in the crash tests. Head impacts occurred more frequently in vehicles where a forward facing child restraint was present behind the driver seat for both the low and high back booster seats. Pretensioners were found to reduce lateral head displacements in all sled test configurations but the greatest reduction in lateral excursion was obtained with a high back booster seat secured with LATCH and tested in combination with pretensioners.

Database improvements for motor vehicle/bicycle crash analysis

PubMed Central

Lusk, Anne C; Asgarzadeh, Morteza; Farvid, Maryam S

2015-01-01

Background Bicycling is healthy but needs to be safer for more to bike. Police crash templates are designed for reporting crashes between motor vehicles, but not between vehicles/bicycles. If written/drawn bicycle-crash-scene details exist, these are not entered into spreadsheets. Objective To assess which bicycle-crash-scene data might be added to spreadsheets for analysis. Methods Police crash templates from 50 states were analysed. Reports for 3350 motor vehicle/bicycle crashes (2011) were obtained for the New York City area and 300 cases selected (with drawings and on roads with sharrows, bike lanes, cycle tracks and no bike provisions). Crashes were redrawn and new bicycle-crash-scene details were coded and entered into the existing spreadsheet. The association between severity of injuries and bicycle-crash-scene codes was evaluated using multiple logistic regression. Results Police templates only consistently include pedal-cyclist and helmet. Bicycle-crash-scene coded variables for templates could include: 4 bicycle environments, 18 vehicle impact-points (opened-doors and mirrors), 4 bicycle impact-points, motor vehicle/bicycle crash patterns, in/out of the bicycle environment and bike/relevant motor vehicle categories. A test of including these variables suggested that, with bicyclists who had minor injuries as the control group, bicyclists on roads with bike lanes riding outside the lane had lower likelihood of severe injuries (OR, 0.40, 95% CI 0.16 to 0.98) compared with bicyclists riding on roads without bicycle facilities. Conclusions Police templates should include additional bicycle-crash-scene codes for entry into spreadsheets. Crash analysis, including with big data, could then be conducted on bicycle environments, motor vehicle potential impact points/doors/mirrors, bicycle potential impact points, motor vehicle characteristics, location and injury. PMID:25835304

Full-Scale Crash Tests and Analyses of Three High-Wing Single

NASA Technical Reports Server (NTRS)

Annett, Martin S.; Littell, Justin D.; Stimson, Chad M.; Jackson, Karen E.; Mason, Brian H.

2015-01-01

The NASA Emergency Locator Transmitter Survivability and Reliability (ELTSAR) project was initiated in 2014 to assess the crash performance standards for the next generation of ELT systems. Three Cessna 172 aircraft have been acquired to conduct crash testing at NASA Langley Research Center's Landing and Impact Research Facility. Testing is scheduled for the summer of 2015 and will simulate three crash conditions; a flare to stall while emergency landing, and two controlled flight into terrain scenarios. Instrumentation and video coverage, both onboard and external, will also provide valuable data of airframe response. Full-scale finite element analyses will be performed using two separate commercial explicit solvers. Calibration and validation of the models will be based on the airframe response under these varying crash conditions.

Overview Of Structural Behavior and Occupant Responses from Crash Test of a Composite Airplane

NASA Technical Reports Server (NTRS)

Jones, Lisa E.; Carden, Huey D.

1995-01-01

As part of NASA's composite structures crash dynamics research, a general aviation aircraft with composite wing, fuselage and empennage (but with metal subfloor structure) was crash tested at the NASA Langley Research Center Impact Research Facility. The test was conducted to determine composite aircraft structural behavior for crash loading conditions and to provide a baseline for a similar aircraft test with a modified subfloor. Structural integrity and cabin volume were maintained. Lumbar loads for dummy occupants in energy absorbing seats wer substantially lower than those in standard aircraft seats; however, loads in the standard seats were much higher that those recorded under similar conditions for an all-metallic aircraft.

Crash Test of an MD-500 Helicopter with a Deployable Energy Absorber Concept

NASA Technical Reports Server (NTRS)

Littell, Justin D.; Jackson, Karen E.; Kellas, Sotiris

2010-01-01

On December 2, 2009, a full scale crash test was successfully conducted of a MD-500 helicopter at the NASA Langley Research Center Landing and Impact Research Facility . The purpose of this test was to evaluate a novel composite honeycomb deployable energy absorbing (DEA) concept for attenuation of structural and crew loads during helicopter crashes under realistic crash conditions. The DEA concept is an alternative to external airbags, and absorbs impact energy through crushing. In the test, the helicopter impacted the concrete surface with 11.83 m/s (38.8 ft/s) horizontal, 7.80 m/s (25.6 ft/s) vertical and 0.15 m/s (0.5 ft/s) lateral velocities; corresponding to a resultant velocity of 14.2 m/s (46.5 ft/s). The airframe and skid gear were instrumented with accelerometers and strain gages to determine structural integrity and load attenuation, while the skin of the airframe was covered with targets for use by photogrammetry to record gross vehicle motion before, during, and after the impact. Along with the collection of airframe data, one Hybrid III 50th percentile anthropomorphic test device (ATD), two Hybrid II 50th percentile ATDs and a specialized human surrogate torso model (HSTM) occupant were seated in the airframe and instrumented for the collection of occupant loads. Resultant occupant data showed that by using the DEA, the loads on the Hybrid II and Hybrid III ATDs were in the Low Risk regime for the injury criteria, while structural data showed the airframe retained its structural integrity post crash. Preliminary results show that the DEA is a viable concept for the attenuation of impact loads.

Controlled Impact Demonstration

NASA Image and Video Library

1984-12-01

The Controlled Impact Demonstration (or colloquially the Crash In the Desert) was a joint project between NASA and the Federal Aviation Administration (FAA) that intentionally crashed a remotely controlled Boeing 720 aircraft to acquire data and test new technologies that might help passengers and crew survive. The crash required more than four years of preparation by NASA Ames Research Center, Langley Research Center, Dryden Flight Research Center, the FAA, and General Electric. After numerous test runs, the plane was crashed on December 1, 1984. The test went generally according to plan, and produced a spectacular fireball that required more than an hour to extinguish. The FAA concluded that about one-quarter of the passengers would have survived, that the antimisting kerosene test fuel did not sufficiently reduce the risk of fire, and that several changes to equipment in the passenger compartment of aircraft were needed. NASA concluded that a head-up display and with microwave landing system would have helped the pilot more safely fly the aircraft.

Qualification Test Report for 450 Gallon Crashworthy Fuel Tank for U.S. Air Force H-53 Helicopter. Volume 6

DTIC Science & Technology

1982-04-02

General S130 Eclipse computer. 2.2.3 Photographic Coverage Each crash test was recorded on 16 mm color film by four W cameras. The event was filmed at...rotate further nose-up until impact. Unfortunately, all cameras had either run out of film or had been turned off prior to impact so that there is no...record of impact angle or crash events. From visual observations at the time, the impact angle seemed to be nearly 90* nose-up. What film exists

Preventing passenger vehicle occupant injuries by vehicle design--a historical perspective from IIHS.

PubMed

O'Neill, Brian

2009-04-01

Motor vehicle crashes result in some 1.2 million deaths and many more injuries worldwide each year and is one of the biggest public health problems facing societies today. This article reviews the history of, and future potential for, one important countermeasure-designing vehicles that reduce occupant deaths and injuries. For many years, people had urged automakers to add design features to reduce crash injuries, but it was not until the mid-1960s that the idea of pursuing vehicle countermeasures gained any significant momentum. In 1966, the U.S. Congress passed the National Traffic and Motor Vehicle Safety Act, requiring the government to issue a comprehensive set of vehicle safety standards. This was the first broad set of requirements issued anywhere in the world, and within a few years similar standards were adopted in Europe and Australia. Early vehicle safety standards specified a variety of safety designs resulting in cars being equipped with lap/shoulder belts, energy-absorbing steering columns, crash-resistant door locks, high-penetration-resistant windshields, etc. Later, the standards moved away from specifying particular design approaches and instead used crash tests and instrumented dummies to set limits on the potential for serious occupant injuries by crash mode. These newer standards paved the way for an approach that used the marketplace, in addition to government regulation, to improve vehicle safety designs-using crash tests and instrumented dummies to provide consumers with comparative safety ratings for new vehicles. The approach began in the late 1970s, when NHTSA started publishing injury measures from belted dummies in new passenger vehicles subjected to frontal barrier crash tests at speeds somewhat higher than specified in the corresponding regulation. This program became the world's first New Car Assessment Program (NCAP) and rated frontal crashworthiness by awarding stars (five stars being the best and one the worst) derived from head and chest injury measures recorded on driver and front-seat test dummies. NHTSA later added side crash tests and rollover ratings to the U.S. NCAP. Consumer crash testing spread worldwide in the 1990s. In 1995, the Insurance Institute for Highway Safety (IIHS) began using frontal offset crash tests to rate and compare frontal crashworthiness and later added side and rear crash assessments. Shortly after, Europe launched EuroNCAP to assesses new car performance including front, side, and front-end pedestrian tests. The influence of these consumer-oriented crash test programs on vehicle designs has been major. From the beginning, U.S. NCAP results prompted manufacturers to improve seat belt performance. Frontal offset tests from IIHS and EuroNCAP resulted in greatly improved front-end crumple zones and occupant compartments. Side impact tests have similarly resulted in improved side structures and accelerated the introduction of side impact airbags, especially those designed to protect occupant's heads. Vehicle safety designs, initially driven by regulations and later by consumer demand because of crash testing, have proven to be very successful public health measures. Since they were first introduced in the late 1960s, vehicle safety designs have saved hundreds of thousands of lives and prevented countless injuries worldwide. The designs that improved vehicle crashworthiness have been particularly effective. Some newer crash avoidance designs also have the potential to be effective-e.g., electronic stability control is already saving many lives in single-vehicle crashes. However, determining the actual effectiveness of these new technologies is a slow process and needs real-world crash experience because there are no assessment equivalent of crash tests for crash avoidance designs.

Occupant injury and fatality in general aviation aircraft for which dynamic crash testing is certification-mandated.

PubMed

Boyd, Douglas D

2015-06-01

Towards further improving general aviation aircraft crashworthiness, multi-axis dynamic tests have been required for aircraft certification (14CFR23.562) since 1985. The objective of this study was to determine if occupants in aircraft certified to these higher crashworthiness standards show a mitigated fraction of fatal accidents and/or injury severity. The NTSB aviation database was queried for accidents occurring between 2002 and 2012 involving aircraft certified to, or immune from, dynamic crash testing and manufactured after 1999. Only operations conducted under 14CFR Part 91 were considered. Statistical analysis employed proportion tests and logistic regression. Off-airport landings are associated with high decelerative forces; however for off-airport landings, the fraction of fatal accidents for aircraft subject to, or exempt from, dynamic crash testing was similar (0.53 and 0.60, respectively). Unexpectedly, for on-airport landings a higher fraction of fatalities was evident for aircraft whose certification mandated dynamic crash testing. Improved crashworthiness standards would be expected to translate into a reduced severity of accident injuries. For all accidents, as well as for those deemed survivable, the fraction of minor and serious injuries was reduced for occupants in aircraft certified to the higher crashworthiness standards. Surprisingly, the fraction of occupants fatally injured was not decreased for aircraft subject to dynamic crash tests. To shed light on this unexpected finding flight history, airman demographics and post-impact fires for aircraft for which dynamic crash testing is mandatory or exempt was examined. For the former cohort the median distance of the accident flight was nearly 44% higher. Aircraft subject to dynamic crash testing were also involved in a greater fraction (0.25 versus 0.12, respectively) of post-impact fires. Our data suggest that while the more stringent crashworthiness standards have mitigated minor and serious injuries, surprisingly the fraction of occupants fatally injured is unaltered. The unchanged fraction of fatal injuries may reflect partly (a) fatigue associated with longer flight distances and (b) a greater proportion of post-impact fires. Copyright © 2015 Elsevier Ltd. All rights reserved.

49 CFR 572.191 - General description.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Transportation Other Regulations Relating to Transportation (Continued) NATIONAL HIGHWAY TRAFFIC SAFETY... the SID-IIsD Side Impact Crash Test Dummy, July 1, 2008,” and, (5) Sign convention for signal outputs reference document SAE J1733 Information Report, titled “Sign Convention for Vehicle Crash Testing,” dated...

Occupant Responses in a Full-Scale Crash Test of the Sikorsky ACAP Helicopter

NASA Technical Reports Server (NTRS)

Jackson, Karen E.; Fasanella, Edwin L.; Boitnott, Richard L.; McEntire, Joseph; Lewis, Alan

2002-01-01

A full-scale crash test of the Sikorsky Advanced Composite Airframe Program (ACAP) helicopter was performed in 1999 to generate experimental data for correlation with a crash simulation developed using an explicit nonlinear, transient dynamic finite element code. The airframe was the residual flight test hardware from the ACAP program. For the test, the aircraft was outfitted with two crew and two troop seats, and four anthropomorphic test dummies. While the results of the impact test and crash simulation have been documented fairly extensively in the literature, the focus of this paper is to present the detailed occupant response data obtained from the crash test and to correlate the results with injury prediction models. These injury models include the Dynamic Response Index (DRI), the Head Injury Criteria (HIC), the spinal load requirement defined in FAR Part 27.562(c), and a comparison of the duration and magnitude of the occupant vertical acceleration responses with the Eiband whole-body acceleration tolerance curve.

Impact Analyses and Tests of Metal Cask Considering Aircraft Engine Crash - 12308

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lee, Sanghoon; Choi, Woo-Seok; Kim, Ki-Young

2012-07-01

The structural integrity of a dual purpose metal cask currently under development by the Korea Radioactive Waste Management Cooperation (KRMC) is evaluated through analyses and tests under a high-speed missile impact considering the targeted aircraft crash conditions. The impact conditions were carefully chosen through a survey on accident cases and recommendations from the literature. The missile impact velocity was set at 150 m/s, and two impact orientations were considered. A simplified missile simulating a commercial aircraft engine is designed from an impact load history curve provided in the literature. In the analyses, the focus is on the evaluation of themore » containment boundary integrity of the metal cask. The analyses results are compared with the results of tests using a 1/3 scale model. The results show very good agreements, and the procedure and methodology adopted in the structural analyses are validated. While the integrity of the cask is maintained in one evaluation where the missile impacts the top side of the free standing cask, the containment boundary is breached in another case in which the missile impacts the center of the cask lid in a perpendicular orientation. A safety assessment using a numerical simulation of an aircraft engine crash into spent nuclear fuel storage systems is performed. A commercially available explicit finite element code is utilized for the dynamic simulation, and the strain rate effect is included in the modeling of the materials used in the target system and missile. The simulation results show very good agreement with the test results. It is noted that this is the first test considering an aircraft crash in Korea. (authors)« less

Rear Seat Occupant Thorax Protection in Near Side Impacts

PubMed Central

Bohman, Katarina; Rosén, Erik; Sunnevang, Cecilia; Boström, Ola

2009-01-01

Thoracic side-airbags (SAB) have proven to protect front seat occupants in side impacts. This benefit has not been evaluated for rear seat occupants who are typically small statured. The objective was to analyze field data from rear seat occupants in near side impacts, and evaluate the effect of a SAB in the rear seat, through full scale vehicle tests. A field study using the NASS-CDS database was performed to review rear seat crash characteristics, occupant injuries (Abbreviated Injury Scale 3+, AIS3+) and injury sources. Full scale tests were performed with the side impact dummy SID-IIs at two different crash severities, with and without SAB in a midsize passenger car. Field data showed that of all AIS3+ injured restrained occupants 13 years and older, 59% had AIS3+ thoracic injuries and 38% had AIS3+ head injuries. The thoracic injuries were distributed to lungs (60%), skeletal fractures (38%) and injuries to arteries (1,26%) and heart (0,1%). For AIS3+ injured children, age 4–12, 51% had AIS3+ thoracic injuries and 54% had AIS3+ head injuries. Compared to adults, children sustained less fractures and more lung injuries. The rear side interior was the main injury source regardless of age group. In the full scale tests, the thoracic side-airbag reduced the average rib deflection by 50% and resulted in an AIS3+ injury risk reduction from 36% to 3%. At the higher impact speed, SAB reduced the injury risk from 93% to 24%. The full scale crash tests showed that SAB offer a significant potential for thoracic injury reduction in the crash severities causing the majority of serious injuries in real life crashes. PMID:20184828

The potential impact and legal feasibility of requiring alcohol testing of all drivers in fatal crashes in Virginia.

DOT National Transportation Integrated Search

2005-01-01

This report addresses how the Code of Virginia can be changed to improve Virginia's rate of testing for blood alcohol concentration (BAC) among drivers involved in crashes where there is a fatality. Currently, the implied consent statute in the Code ...

Modelling the side impact of carbon fibre tubes

NASA Astrophysics Data System (ADS)

Sudharsan, Ms R.; Rolfe, B. F., Dr; Hodgson, P. D., Prof

2010-06-01

Metallic tubes have been extensively studied for their crashworthiness as they closely resemble automotive crash rails. Recently, the demand to improve fuel economy and reduce vehicle emissions has led automobile manufacturers to explore the crash properties of light weight materials such as fibre reinforced polymer composites, metallic foams and sandwich structures in order to use them as crash barriers. This paper discusses the response of carbon fibre reinforced polymer (CFRP) tubes and their failure mechanisms during side impact. The energy absorption of CFRP tubes is compared to similar Aluminium tubes. The response of the CFRP tubes during impact was modelled using Abaqus finite element software with a composite fabric material model. The material inputs were given based on standard tension and compression test results and the in-plane damage was defined based on cyclic shear tests. The failure modes and energy absorption observed during the tests were well represented by the finite element model.

Differential Rollover Risk in Vehicle-to-Traffic Barrier Collisions

PubMed Central

Gabauer, Douglas J.; Gabler, Hampton C.

2009-01-01

In the roadside safety community, there has been debate over the influence of vehicle and barrier type on rollover rates in traffic barrier crashes. This study investigated rollover rates between sport utility vehicles (SUVs), pickup trucks, and cars in vehicle-traffic barrier crashes and has examined the effect of barrier type on rollover risk for concrete barrier and metal barrier impacts. The analysis included 955 barrier impact cases that were selected from 11-years of in-depth crash data available through the National Automotive Sampling System (NASS) / Crashworthiness Data System (CDS). In real world tow-away level longitudinal barrier collisions, the most important predictors of vehicle rollover were found to be vehicle type and whether the vehicle was tracking prior to barrier impact. Based on binary logistic regression, SUVs were found to have 8 times the risk of rollover as cars in barrier impacts. Although pickups were found to have an increased risk of rollover compared to cars, the risk was not as pronounced as that found for SUVs. This finding has direct implications for the full scale crash testing of longitudinal barriers as the testing procedures have been predicated on the assumption that the pickup truck provides a critical or worst case impact scenario. In towaway crashes, our study does not support the notion that concrete barriers have a higher risk of vehicle rollover than metal beam barriers. PMID:20184839

Crash protection of stock car racing drivers--application of biomechanical analysis of Indy car crash research.

PubMed

Melvin, John W; Begeman, Paul C; Faller, Ronald K; Sicking, Dean L; McClellan, Scott B; Maynard, Edwin; Donegan, Michael W; Mallott, Annette M; Gideon, Thomas W

2006-11-01

Biomechanical analysis of Indy car crashes using on-board impact recorders (Melvin et al. 1998, Melvin et al. 2001) indicates that Indy car driver protection in high-energy crashes can be achieved in frontal, side, and rear crashes with severities in the range of 100 to 135 G peak deceleration and velocity changes in the range of 50 to 70 mph. These crashes were predominantly single-car impacts with the rigid concrete walls of oval tracks. This impressive level of protection was found to be due to the unique combination of a very supportive and tight-fitting cockpit-seating package, a six-point belt restraint system, and effective head padding with an extremely strong chassis that defines the seat and cockpit of a modern Indy car. In 2000 and 2001, a series of fatal crashes in stock car racing created great concern for improving the crash protection for drivers in those racecars. Unlike the Indy car, the typical racing stock car features a more spacious driver cockpit due to its resemblance to the shape of a passenger car. The typical racing seat used in stock cars did not have the same configuration or support characteristics of the Indy car seat, and five-point belt restraints were used. The tubular steel space frame chassis of a stock car also differs from an Indy car's composite chassis structure in both form and mechanical behavior. This paper describes the application of results of the biomechanical analysis of the Indy car crash studies to the unique requirements of stock car racing driver crash protection. Sled test and full-scale crash test data using both Hybrid III frontal crash anthropomorphic test devices (ATDs) and BioSID side crash ATDs for the purpose of evaluating countermeasures involving restraint systems, seats and head/neck restraints has been instrumental in guiding these developments. In addition, the development of deformable walls for oval tracks (the SAFER Barrier) is described as an adjunct to improved occupant restraint through control of the crash forces acting on a racing car. NASCAR (National Association for Stock Car Auto Racing, Inc) implemented crash recording in stock car racing in its three national series in 2002. Data from 2925 crashes from 2002 through the 2005 season are summarized in terms of crash severity, crash direction, injury outcome, and protective system performance.

Impact Test of a NACA-Designed Pilot Seat and Harness

NASA Image and Video Library

1955-02-21

This time-lapse photograph shows the test of a pilot seat and restraint designed by researchers at the National Advisory Committee for Aeronautics (NACA) Lewis Flight Propulsion Laboratory. The laboratory had undertaken a multi-year investigation into the causes and preventative measures for fires resulting from low altitude aircraft crashes. The program was expanded in the mid-1950s to include the study of crash impact on passengers, new types of types of seat restraints, and better seat designs. The impact program began by purposely wrecking surplus transport Fairchild C-82 Packet and Piper Cub aircraft into barricades at the end of a test runway. Instrumented dummies and cameras were installed in the pilot and passenger areas. After determining the different loads experienced during a crash and the effects on the passengers, the NACA researchers began designing new types of seats and restraints. The result was an elastic seat that flexed upon impact, absorbing 75 percent of the loads before it slowly recoiled. This photograph shows the seats mounted on a pendulum with a large spring behind the platform to provide the jolt that mimicked the forces of a crash. The seat was constructed without any potentially damaging metal parts and included rubber-like material, an inflated back and arms, and a seat cushion. After the pendulum tests, the researchers compared the flexible seats to the rigid seats during a crash of a transport aircraft. They found the passengers in the rigid seats received 66 percent higher g-forces than the NACA-designed seats.

Crash tests of four low-wing twin-engine airplanes with truss-reinforced fuselage structure

NASA Technical Reports Server (NTRS)

Williams, M. S.; Fasanella, E. L.

1982-01-01

Four six-place, low-wing, twin-engine, general aviation airplane test specimens were crash tested under controlled free flight conditions. All airplanes were impacted on a concrete test surface at a nomial flight path velocity of 27 m/sec. Two tests were conducted at a -15 deg flight path angle (0 deg pitch angle and 15 deg pitch angle), and two were conducted at a -30 deg flight path angle (-30 deg pitch angle). The average acceleration time histories (crash pulses) in the cabin area for each principal direction were calculated for each crash test. In addition, the peak floor accelerations were calculated for each test as a function of aircraft fuselage longitudinal station number. Anthropomorphic dummy accelerations were analyzed using the dynamic response index and severity index (SI) models. Parameters affecting the dummy restraint system were studied; these parameters included the effect of no upper torso restraint, measurement of the amount of inertia-reel strap pullout before locking, measurement of dummy chest forward motion, and loads in the restraints. With the SI model, the dummies with no shoulder harness received head impacts above the concussive threshold.

IIHS side crash test ratings and occupant death risk in real-world crashes.

PubMed

Teoh, Eric R; Lund, Adrian K

2011-10-01

To evaluate how well the Insurance Institute for Highway Safety (IIHS) side crash test ratings predict real-world occupant death risk in side-impact crashes. The IIHS has been evaluating passenger vehicle side crashworthiness since 2003. In the IIHS side crash test, a vehicle is impacted perpendicularly on the driver's side by a moving deformable barrier simulating a typical sport utility vehicle (SUV) or pickup. Injury ratings are computed for the head/neck, torso, and pelvis/leg, and vehicles are rated based on their ability to protect occupants' heads and resist occupant compartment intrusion. Component ratings are combined into an overall rating of good, acceptable, marginal, or poor. A driver-only rating was recalculated by omitting rear passenger dummy data. Data were extracted from the Fatality Analysis Reporting System (FARS) and National Automotive Sampling System/General Estimates System (NASS/GES) for the years 2000-2009. Analyses were restricted to vehicles with driver side air bags with head and torso protection as standard features. The risk of driver death was computed as the number of drivers killed (FARS) divided by the number involved (NASS/GES) in left-side impacts and was modeled using logistic regression to control for the effects of driver age and gender and vehicle type and curb weight. Death rates per million registered vehicle years were computed for all outboard occupants and compared by overall rating. Based on the driver-only rating, drivers of vehicles rated good were 70 percent less likely to die when involved in left-side crashes than drivers of vehicles rated poor, after controlling for driver and vehicle factors. Compared with vehicles rated poor, driver death risk was 64 percent lower for vehicles rated acceptable and 49 percent lower for vehicles rated marginal. All 3 results were statistically significant. Among components, vehicle structure rating exhibited the strongest relationship with driver death risk. The vehicle registration-based results for drivers were similar, suggesting that the benefit was not due to differences in crash risk. The same pattern of results held for outboard occupants in nearside crashes per million registered vehicle years and, with the exception of marginally rated vehicles, also held for other crash types. Results show that IIHS side crash test ratings encourage designs that improve crash protection in meaningful ways beyond encouraging head protection side air bags, particularly by promoting vehicle structures that limit occupant compartment intrusion. Results further highlight the need for a strong occupant compartment and its influence in all types of crashes.

Constrained Laboratory vs. Unconstrained Steering-Induced Rollover Crash Tests.

PubMed

Kerrigan, Jason R; Toczyski, Jacek; Roberts, Carolyn; Zhang, Qi; Clauser, Mark

2015-01-01

The goal of this study was to evaluate how well an in-laboratory rollover crash test methodology that constrains vehicle motion can reproduce the dynamics of unconstrained full-scale steering-induced rollover crash tests in sand. Data from previously-published unconstrained steering-induced rollover crash tests using a full-size pickup and mid-sized sedan were analyzed to determine vehicle-to-ground impact conditions and kinematic response of the vehicles throughout the tests. Then, a pair of replicate vehicles were prepared to match the inertial properties of the steering-induced test vehicles and configured to record dynamic roof structure deformations and kinematic response. Both vehicles experienced greater increases in roll-axis angular velocities in the unconstrained tests than in the constrained tests; however, the increases that occurred during the trailing side roof interaction were nearly identical between tests for both vehicles. Both vehicles experienced linear accelerations in the constrained tests that were similar to those in the unconstrained tests, but the pickup, in particular, had accelerations that were matched in magnitude, timing, and duration very closely between the two test types. Deformations in the truck test were higher in the constrained than the unconstrained, and deformations in the sedan were greater in the unconstrained than the constrained as a result of constraints of the test fixture, and differences in impact velocity for the trailing side. The results of the current study suggest that in-laboratory rollover tests can be used to simulate the injury-causing portions of unconstrained rollover crashes. To date, such a demonstration has not yet been published in the open literature. This study did, however, show that road surface can affect vehicle response in a way that may not be able to be mimicked in the laboratory. Lastly, this study showed that configuring the in-laboratory tests to match the leading-side touchdown conditions could result in differences in the trailing side impact conditions.

Association between older driver characteristics, on-road driving test performance, and crash liability.

PubMed

Keall, Michael D; Frith, William J

2004-06-01

From May 1999, a new system for licensing older drivers was introduced in New Zealand. It included a practical on-road driving test with expanded scope, to be completed every two years from the time the driver turns 80. The relationship between crashes and test performance needed to be studied to inform the debate regarding the testing system. The population studied was all drivers who entered this licensing system during its first three years of operation. They were defined as crash involved if they were involved in an injury crash during the two years following their first licensure under the new system. Logistic regression was used to describe the risk of crash involvement in terms of driving test performance and other driver characteristics. Each driving test failure was associated with a 33% increase in the odds of crash involvement (95% CI 14% to 55%), controlling for age, gender, minor traffic violations, and whether the older driver lived with another licensed driver or not. Minor traffic violations in the two years following the driving test were associated with twice the odds of crash involvement. These results suggest that the new on-road driving test does identify older driver behaviors or limitations that are related to crash liability. It is anticipated that the results presented here will provide essential information for discussing older driver licensing systems, whose impact will grow in importance as the population of drivers ages.

Impact direction effect on serious-to-fatal injuries among drivers in near-side collisions according to impact location: focus on thoracic injuries.

PubMed

Lai, Xinghua; Ma, Chunsheng; Hu, Jingwen; Zhou, Qing

2012-09-01

Occupant injury in real world vehicle accidents can be significantly affected by a set of crash characteristics, of which impact direction and impact location (or damage location) in general scale interval (e.g., frontal impact is frequently defined as general damage to vehicle frontal end with impact angle range of 11-1 o'clock) have been identified to associate with injury outcome. The effects of crash configuration in more specific scale of interval on the injury characteristics have not been adequately investigated. This paper presents a statistical analysis to investigate the combined effects of specific impact directions and impact locations on the serious-to-fatal injuries of driver occupants involved in near-side collisions using crash data from National Automotive Sampling System-Crashworthiness Data System (NASS-CDS) for the calendar years of 1995-2005. The screened injury dataset is categorized by three impact locations (side front, side center and side distributed) and two impact directions (oblique impact at 10 o'clock and pure lateral impact at 9 o'clock), resulting in six crash configurations in total. The weighted counts and the risks of different types of injuries in each subgroup are calculated, with which the relative risks along with 95% confidence intervals under oblique impacts versus lateral impacts in each impact location category are computed. Accordingly, the most frequent injury patterns, the risks and the coded-sources of serious thoracic injuries in different crash configurations are identified. The approach adopted in the present study provides new perspectives into occupant injury outcomes and associated mechanism. Results of the analyses reveal the importance of consideration of the crash configurations beyond the scope of existing side-impact regulatory tests and stress the necessity of vehicle crashworthiness and restraint system design in omni-direction to better protect occupants in real-world crash scenarios. Copyright © 2012 Elsevier Ltd. All rights reserved.

Overview of the Transport Rotorcraft Airframe Crash Testbed (TRACT) Full Scale Crash Tests

NASA Technical Reports Server (NTRS)

Annett, Martin; Littell, Justin

2015-01-01

The Transport Rotorcraft Airframe Crash Testbed (TRACT) full-scale tests were performed at NASA Langley Research Center's Landing and Impact Research Facility in 2013 and 2014. Two CH-46E airframes were impacted at 33-ft/s forward and 25-ft/s vertical combined velocities onto soft soil, which represents a severe, but potentially survivable impact scenario. TRACT 1 provided a baseline set of responses, while TRACT 2 included retrofits with composite subfloors and other crash system improvements based on TRACT 1. For TRACT 2, a total of 18 unique experiments were conducted to evaluate Anthropomorphic Test Devices (ATD) responses, seat and restraint performance, cargo restraint effectiveness, patient litter behavior, and activation of emergency locator transmitters and crash sensors. Combinations of Hybrid II, Hybrid III, and ES-2 ATDs were placed in forward and side facing seats and occupant results were compared against injury criteria. The structural response of the airframe was assessed based on accelerometers located throughout the airframe and using three-dimensional photogrammetric techniques. Analysis of the photogrammetric data indicated regions of maximum deflection and permanent deformation. The response of TRACT 2 was noticeably different in the horizontal direction due to changes in the cabin configuration and soil surface, with higher acceleration and damage occurring in the cabin. Loads from ATDs in energy absorbing seats and restraints were within injury limits. Severe injury was likely for ATDs in forward facing passenger seats.

Crash response data system for the controlled impact demonstration (CID) of a full scale transport aircraft

NASA Astrophysics Data System (ADS)

Calloway, Raymond S.; Knight, Vernie H., Jr.

NASA Langley's Crash Response Data System (CRDS) which is designed to acquire aircraft structural and anthropomorphic dummy responses during the full-scale transport CID test is described. Included in the discussion are the system design approach, details on key instrumentation subsystems and operations, overall instrumentation crash performance, and data recovery results. Two autonomous high-environment digital flight instrumentation systems, DAS 1 and DAS 2, were employed to obtain research data from various strain gage, accelerometer, and tensiometric sensors installed in the B-720 test aircraft. The CRDS successfully acquired 343 out of 352 measurements of dynamic crash data.

Side Impact Regulatory Trends, Crash Environment and Injury Risk in the USA.

PubMed

Prasad, Priya; Dalmotas, Dainius; Chouinard, Aline

2015-11-01

Light duty vehicles in the US are designed to meet and exceed regulatory standards, self-imposed industry agreements and safety rating tests conducted by NHTSA and IIHS. The evolution of side impact regulation in the US from 1973 to 2015 is discussed in the paper along with two key industry agreements in 2003 affecting design of restraint systems and structures for side impact protection. A combination of all the above influences shows that vehicles in the US are being designed to more demanding and comprehensive requirements than in any other region of the world. The crash environment in the US related to side impacts was defined based on data in the nationally representative crash database NASS. Crash environment factors, including the distribution of cars, light trucks and vans (LTV's), and medium-to-heavy vehicles (MHV's) in the fleet, and the frequency of their interactions with one another in side impacts, were considered. Other factors like, crash severity in terms of closing velocity between two vehicles involved in crash, gender and age of involved drivers in two-vehicle and single vehicle crashes, were also examined. Injury risks in side impacts to drivers and passengers were determined in various circumstances such as near-side, far-side, and single vehicle crashes as a function of crash severity, in terms of estimated closing speed or lateral delta-V. Also injury risks in different pairs of striking and struck cars and LTV's, were estimated. A logistic regression model for studying injury risks in two vehicle crashes was developed. The risk factors included in the model include case and striking vehicles, consisting of cars, SUV's, vans, and pickup trucks, delta-V, damage extent, occupant proximity to the impact side, age and gender of the occupant, and belt use. Results show that car occupants make up the vast majority of serious-to-fatally injured occupants. Injury rates of car occupants in two-vehicle collision are highest when the car is struck by a pickup and lowest when struck by a car. This was the case across all lateral delta-V ranges. Additionally, near-side injury rates are substantially higher than those in far-side impacts.

Tough, strong, durable

DOT National Transportation Integrated Search

2000-04-15

Article reports on vehicle crash tests with child restraints to determine the extent of damage, if any, in high speed impacts. A California law requiring insurers to cover the cost of replacing a restraint used by a child in any crash, regardless of ...

Innovative Anti Crash Absorber for a Crashworthy Landing Gear

NASA Astrophysics Data System (ADS)

Guida, Michele; Marulo, Francesco; Montesarchio, Bruno; Bruno, Massimiliano

2014-06-01

This paper defines an innovative concept to anti-crash absorber in composite material to be integrated on the landing gear as an energy-absorbing device in crash conditions to absorb the impact energy. A composite cylinder tube in carbon fiber material is installed coaxially to the shock absorber cylinder and, in an emergency landing gear condition, collapses in order to enhance the energy absorption performance of the landing system. This mechanism has been developed as an alternative solution to a high-pressure chamber installed on the Agusta A129 CBT helicopter, which can be considered dangerous when the helicopter operates in hard and/or crash landing. The characteristics of the anti-crash device are presented and the structural layout of a crashworthy landing gear adopting the developed additional energy absorbing stage is outlined. Experimental and numerical results relevant to the material characterization and the force peaks evaluation of the system development are reported. The anti-crash prototype was designed, analysed, optimized, made and finally the potential performances of a landing gear with the additional anti-crash absorber system are tested by drop test and then correlated with a similar test without the anti-crash system, showing that appreciable energy absorbing capabilities and efficiencies can be obtained in crash conditions.

Advances in crash dynamics for aircraft safety

NASA Astrophysics Data System (ADS)

Guida, M.; Marulo, F.; Abrate, S.

2018-04-01

This paper studies the ability of the fuselage's lower lobe to absorb the energy during a crash landing, where the introduction of the composite materials can improve the crash survivability thanks to the crushing capability of structural parts to limit the effects of deceleration on the occupants. Providing a protective shell around the occupants and minimizing the risks of injuries during and immediately after the crash in the post-crash regime is a safety requirement. This study consists of: (1) numerical and experimental investigations on small components to verify design concepts using high performance composite materials; (2) analyses of full scale crashes of fuselage lower lobes. This paper outlines an approach for demonstrating the crashworthiness characteristics of the airframe performing a drop test at low velocity impact to validate a numerical model obtained by assembling structural components and materials' properties previously obtained by testing coupons and sub-elements.

Influences of pre-crash braking induced dummy - forward displacements on dummy behaviour during EuroNCAP frontal crashtest.

PubMed

Woitsch, Gernot; Sinz, Wolfgang

2014-01-01

Combination of active and passive safety systems is a future key to further improvement in vehicle safety. Autonomous braking systems are able to reduce collision speeds, and therefore severity levels significantly. Passengers change their position due to pre-impact vehicle motion, a fact, which has not yet been considered in common crash tests. For this paper, finite elements simulations of crash tests were performed to show that forward displacements due to pre-crash braking do not necessarily increase dummy load levels. So the influence of different pre-crash scenarios, all leading to equal closing speeds in the crash phase, are considered in terms of vehicle motion (pitching, deceleration) and restraint system configurations (belt load limiter, pretensioner). The influence is evaluated by dummy loads as well as contact risk between the dummy and the interior. Copyright © 2013 Elsevier Ltd. All rights reserved.

Vertical drop test of a transport fuselage center section including the wheel wells

NASA Technical Reports Server (NTRS)

Williams, M. S.; Hayduk, R. J.

1983-01-01

A Boeing 707 fuselage section was drop tested to measure structural, seat, and anthropomorphic dummy response to vertical crash loads. The specimen had nominally zero pitch, roll and yaw at impact with a sink speed of 20 ft/sec. Results from this drop test and other drop tests of different transport sections will be used to prepare for a full-scale crash test of a B-720.

Homogenization of Vehicle Fleet Frontal Crash Pulses from 2000–2010

PubMed Central

Locey, Caitlin M.; Garcia-Espana, J. Felipe; Toh, Akira; Belwadi, Aditya; Arbogast, Kristy B.; Maltese, Matthew R.

2012-01-01

Full-scale vehicle crash tests are performed globally to assess vehicle structure and restraint system performance. The crash pulse, captured by accelerometers mounted within the occupant compartment, measures the motion of the vehicle during the impact event. From an occupant’s perspective, the crash pulse is the inertial event to which the vehicle’s restraint systems must respond in order to mitigate the forces and accelerations that act on a passenger, and thus reduce injury risk. The objective of this study was to quantify the characteristics of crash pulses for different vehicle types in the contemporary North American fleet, and delineate current trends in crash pulse evolution. NHTSA and Transport Canada crash test databases were queried for full-frontal rigid barrier crash tests of passenger vehicles model year 2000–2010 with impact angle equaling zero degrees. Acceleration-time histories were analyzed for all accelerometers attached to the vehicle structure within the occupant compartment. Custom software calculated the following crash pulse characteristics (CPCs): peak deceleration, time of peak deceleration, onset rate, pulse duration, and change in velocity. Vehicle body types were classified by adapting the Highway Loss Data Institute (HLDI) methodology, and vehicles were assigned a generation start year in place of model year in order to more accurately represent structural change over time. 1094 vehicle crash tests with 2795 individual occupant compartment-mounted accelerometers were analyzed. We found greater peak decelerations and and shorter pulse durations across multiple vehicle types in newer model years as compared to older. For midsize passenger cars, large passenger cars, and large SUVs in 56 km/h rigid barrier tests, maximum deceleration increased by 0.40, 0.96, and 1.57 g/year respectively, and pulse duration decreased by 0.74, 1.87, and 2.51 ms/year. We also found that the crash pulse characteristics are becoming more homogeneous in the modern vehicle fleet; the range of peak deceleration values for all vehicle classes decreased from 17.1 g in 1997–1999 generation start years to 10.7 g in 2009–2010 generation years, and the pulse duration range decreased from 39.5 ms to 13.4 ms for the same generation year groupings. This latter finding suggests that the designs of restraint systems may become more universally applicable across vehicle body types, since the occupant compartment accelerations are not as divergent for newer vehicles. PMID:23169139

Crash simulation of UNS electric vehicle under frontal front impact

NASA Astrophysics Data System (ADS)

Susilo, D. D.; Lukamana, N. I.; Budiana, E. P.; Tjahjana, D. D. D. P.

2016-03-01

Sebelas Maret University has been developing an Electric Vehicle namely SmarT-EV UNS. The main structure of the car are chasis and body. The chasis is made from steel and the body is made from fiberglass composite. To ensure the safety of the car, both static and dynamic tests were carried out to these structures, including their materials, like: tensile test, bending test, and impact test. Another test needed by this vehicle is crashworthiness test. To perform the test, it is needed complex equipments and it is quite expensive. Another way to obtain vehicle crashworthiness behaviour is by simulate it. The purpose of this study was to simulate the response of the Smart-EV UNS electric vehicle main structure when crashing rigid barrier from the front. The crash simulation was done in according to the NHTSA (National Highway Traffic Safety Administration) within the speed of the vehicle of 35 mph. The UNS Electric Vehicle was modelled using SolidWorks software, and the simulation process was done by finite element method using ANSYS software. The simulation result showed that the most internal impact energy was absorbed by chassis part. It absorbed 76.2% of impact energy, then the base absorbed 11.3 %, while the front body absorbed 2.5 %, and the rest was absorbed by fender, hood, and other parts.

Crash energy absorption of two-segment crash box with holes under frontal load

NASA Astrophysics Data System (ADS)

Choiron, Moch. Agus; Sudjito, Hidayati, Nafisah Arina

2016-03-01

Crash box is one of the passive safety components which designed as an impact energy absorber during collision. Crash box designs have been developed in order to obtain the optimum crashworthiness performance. Circular cross section was first investigated with one segment design, it rather influenced by its length which is being sensitive to the buckling occurrence. In this study, the two-segment crash box design with additional holes is investigated and deformation behavior and crash energy absorption are observed. The crash box modelling is performed by finite element analysis. The crash test components were impactor, crash box, and fixed rigid base. Impactor and the fixed base material are modelled as a rigid, and crash box material as bilinear isotropic hardening. Crash box length of 100 mm and frontal crash velocity of 16 km/jam are selected. Crash box material of Aluminum Alloy is used. Based on simulation results, it can be shown that holes configuration with 2 holes and ¾ length locations have the largest crash energy absorption. This condition associated with deformation pattern, this crash box model produces axisymmetric mode than other models.

A Survey of Research Performed at NASA Langley Research Center's Impact Dynamics Research Facility

NASA Technical Reports Server (NTRS)

Jackson, K. E.; Fasanella, E. L.

2003-01-01

The Impact Dynamics Research Facility (IDRF) is a 240-ft-high gantry structure located at NASA Langley Research Center in Hampton, Virginia. The facility was originally built in 1963 as a lunar landing simulator, allowing the Apollo astronauts to practice lunar landings under realistic conditions. The IDRF was designated a National Historic Landmark in 1985 based on its significant contributions to the Apollo Program. In 1972, the facility was converted to a full-scale crash test facility for light aircraft and rotorcraft. Since that time, the IDRF has been used to perform a wide variety of impact tests on full-scale aircraft and structural components in support of the General Aviation (GA) aircraft industry, the US Department of Defense, the rotorcraft industry, and NASA in-house aeronautics and space research programs. The objective of this paper is to describe most of the major full-scale crash test programs that were performed at this unique, world-class facility since 1974. The past research is divided into six sub-topics: the civil GA aircraft test program, transport aircraft test program, military test programs, space test programs, basic research, and crash modeling and simulation.

Evaluation of the First Transport Rotorcraft Airframe Crash Testbed (TRACT 1) Full-Scale Crash Test

NASA Technical Reports Server (NTRS)

Annett, Martin S.; Littell, Justin D.; Jackson, Karen E.; Bark, Lindley W.; DeWeese, Rick L.; McEntire, B. Joseph

2014-01-01

In 2012, the NASA Rotary Wing Crashworthiness Program initiated the Transport Rotorcraft Airframe Crash Testbed (TRACT) research program by obtaining two CH-46E helicopters from the Navy CH-46E Program Office (PMA-226) at the Navy Flight Readiness Center in Cherry Point, North Carolina. Full-scale crash tests were planned to assess dynamic responses of transport-category rotorcraft under combined horizontal and vertical impact loading. The first crash test (TRACT 1) was performed at NASA Langley Research Center's Landing and Impact Research Facility (LandIR), which enables the study of critical interactions between the airframe, seat, and occupant during a controlled crash environment. The CH-46E fuselage is categorized as a medium-lift rotorcraft with fuselage dimensions comparable to a regional jet or business jet. The first TRACT test (TRACT 1) was conducted in August 2013. The primary objectives for TRACT 1 were to: (1) assess improvements to occupant loads and displacement with the use of crashworthy features such as pre-tensioning active restraints and energy absorbing seats, (2) develop novel techniques for photogrammetric data acquisition to measure occupant and airframe kinematics, and (3) provide baseline data for future comparison with a retrofitted airframe configuration. Crash test conditions for TRACT 1 were 33-ft/s forward and 25-ft/s vertical combined velocity onto soft soil, which represent a severe, but potentially survivable impact scenario. The extraordinary value of the TRACT 1 test was reflected by the breadth of meaningful experiments. A total of 8 unique experiments were conducted to evaluate ATD responses, seat and restraint performance, cargo restraint effectiveness, patient litter behavior, and photogrammetric techniques. A combination of Hybrid II, Hybrid III, and ES-2 Anthropomorphic Test Devices (ATDs) were placed in forward and side facing seats and occupant results were compared against injury criteria. Loads from ATDs in energy absorbing seats and restraints were within injury limits. Severe injury was likely for ATDs in forward facing passenger seats, legacy troop bench seats, and a three-tiered patient litter. In addition, two standing ATDs were used to evaluate the benefit of Mobile Aircrew Restraint Systems (MARS) versus a standard gunner's belt. The ATD with the MARS survived the impact, while fatal head blunt trauma occurred for the standing ATD held by the legacy gunner's belt. In addition to occupant loading, the structural response of the airframe was assessed based on accelerometers located throughout the airframe and using three-dimensional photogrammetric techniques. Analysis of the photogrammetric data indicated regions of maximum deflection and permanent deformation.

Evaluation of the Second Transport Rotorcraft Airframe Crash Testbed (TRACT 2) Full Scale Crash Test

NASA Technical Reports Server (NTRS)

Annett, Martin; Littell, Justin

2015-01-01

Two Transport Rotorcraft Airframe Crash Testbed (TRACT) full-scale tests were performed at NASA Langley Research Center's Landing and Impact Research Facility in 2013 and 2014. Two CH-46E airframes were impacted at 33-ft/s forward and 25-ft/s vertical combined velocities onto soft soil, which represents a severe, but potentially survivable impact scenario. TRACT 1 provided a baseline set of responses, while TRACT 2 included retrofits with composite subfloors and other crash system improvements based on TRACT 1. For TRACT 2, a total of 18 unique experiments were conducted to evaluate ATD responses, seat and restraint performance, cargo restraint effectiveness, patient litter behavior, and activation of emergency locator transmitters and crash sensors. Combinations of Hybrid II, Hybrid III, and ES-2 Anthropomorphic Test Devices (ATDs) were placed in forward and side facing seats and occupant results were compared against injury criteria. The structural response of the airframe was assessed based on accelerometers located throughout the airframe and using three-dimensional photogrammetric techniques. Analysis of the photogrammetric data indicated regions of maximum deflection and permanent deformation. The response of TRACT 2 was noticeably different in the longitudinal direction due to changes in the cabin configuration and soil surface, with higher acceleration and damage occurring in the cabin. Loads from ATDs in energy absorbing seats and restraints were within injury limits. Severe injury was likely for ATDs in forward facing passenger seats.

The Field Relevance of NHTSA's Oblique Research Moving Deformable Barrier Tests.

PubMed

Prasad, Priya; Dalmotas, Dainius; German, Alan

2014-11-01

A small overlap frontal crash test has been recently introduced by the Insurance Institute for Highway Safety in its frontal rating scheme. Another small overlap frontal crash test is under development by the National Highway Traffic Safety Administration (NHTSA). Whereas the IIHS test is conducted against a fixed rigid barrier, the NHTSA test is conducted with a moving deformable barrier that overlaps 35% of the vehicle being tested and the angle between the longitudinal axis of the barrier and the longitudinal axis of the test vehicle is 15 degrees. The field relevance of the IIHS test has been the subject of a paper by Prasad et al. (2014). The current study is aimed at examining the field relevance of the NHTSA test. The field relevance is indicated by the frequency of occurrence of real world crashes that are simulated by the test conditions, the proportion of serious-to-fatal real world injuries explained by the test condition, and rates of serious injury to the head, chest and other body regions in the real world crashes resembling the test condition. The database examined for real world crashes is NASS. Results of the study indicate that 1.4% of all frontal 11-to-1 o'clock crashes are simulated by the test conditions that account for 2.4% to 4.5% of all frontal serious-to-fatal (MAIS3+F) injuries. Injury rates of the head and the chest are substantially lower in far-side than in near-side frontal impacts. Crash test ATD rotational responses of the head in the tests overpredict the real world risk of serious-to-fatal brain injuries.

The influence of damage distribution on serious brain injury in occupants in frontal motor vehicle crashes.

PubMed

Coimbra, Raul; Conroy, Carol; Hoyt, David B; Pacyna, Sharon; May, MarSue; Erwin, Steve; Tominaga, Gail; Kennedy, Frank; Sise, Michael; Velky, Tom

2008-07-01

In spite of improvements in motor vehicle safety systems and crashworthiness, motor vehicle crashes remain one of the leading causes of brain injury. The purpose of this study was to determine if the damage distribution across the frontal plane affected brain injury severity of occupants in frontal impacts. Occupants in "head on" frontal impacts with a Principal Direction of Force (PDOF) equal to 11, 12, or 1o'clock who sustained serious brain injury were identified using the Crash Injury Research Engineering Network (CIREN) database. Impacts were further classified based on the damage distribution across the frontal plane as distributed, offset, and extreme offset (corner). Overall, there was no significant difference for brain injury severity (based on Glasgow Coma Scale<9, or brain injury AIS>2) comparing occupants in the different impact categories. For occupants in distributed frontal impacts, safety belt use was protective (odds ratio (OR)=0.61) and intrusion at the occupant's seat position was four times more likely to result in severe (Glasgow Coma Scale (GCS)<9) brain injury (OR=4.35). For occupants in offset frontal impacts, again safety belt use was protective against severe brain injury (OR=0.25). Possibly due to the small number of brain-injured occupants in corner impacts, safety belts did not significantly protect against increased brain injury severity during corner impacts. This study supports the importance of safety belt use to decrease brain injury severity for occupants in distributed and offset frontal crashes. It also illustrates how studying "real world" crashes may provide useful information on occupant injuries under impact circumstances not currently covered by crash testing.

Impact evaluation of composite floor sections

NASA Technical Reports Server (NTRS)

Boitnott, Richard L.; Fasanella, Edwin L.

1989-01-01

Graphite-epoxy floor sections representative of aircraft fuselage construction were statically and dynamically tested to evaluate their response to crash loadings. These floor sections were fabricated using a frame-stringer design typical of present aluminum aircraft without features to enhance crashworthiness. The floor sections were tested as part of a systematic research program developed to study the impact response of composite components of increasing complexity. The ultimate goal of the research program is to develop crashworthy design features for future composite aircraft. Initially, individual frames of six-foot diameter were tested both statically and dynamically. The frames were then used to construct built-up floor sections for dynamic tests at impact velocities of approximately 20 feet/sec to simulate survivable crash velocities. In addition, static tests were conducted to gain a better understanding of the failure mechanisms seen in the dynamic tests.

Crash energy absorption of two-segment crash box with holes under frontal load

DOE Office of Scientific and Technical Information (OSTI.GOV)

Choiron, Moch Agus, E-mail: agus-choiron@ub.ac.id; Sudjito,; Hidayati, Nafisah Arina

Crash box is one of the passive safety components which designed as an impact energy absorber during collision. Crash box designs have been developed in order to obtain the optimum crashworthiness performance. Circular cross section was first investigated with one segment design, it rather influenced by its length which is being sensitive to the buckling occurrence. In this study, the two-segment crash box design with additional holes is investigated and deformation behavior and crash energy absorption are observed. The crash box modelling is performed by finite element analysis. The crash test components were impactor, crash box, and fixed rigid base.more » Impactor and the fixed base material are modelled as a rigid, and crash box material as bilinear isotropic hardening. Crash box length of 100 mm and frontal crash velocity of 16 km/jam are selected. Crash box material of Aluminum Alloy is used. Based on simulation results, it can be shown that holes configuration with 2 holes and ¾ length locations have the largest crash energy absorption. This condition associated with deformation pattern, this crash box model produces axisymmetric mode than other models.« less

ATD Occupant Responses from Three Full-Scale General Aviation Crash Tests

NASA Technical Reports Server (NTRS)

Littell, Justin D.; Annett, Martin S.

2016-01-01

During the summer of 2015, three Cessna 172 General Aviation (GA) aircraft were crash tested at the Landing and Impact Research (LandIR) Facility at NASA Langley Research Center (LaRC). Three different crash scenarios were represented. The first test simulated a flare-to-stall emergency or hard landing onto a rigid surface such as a road or runway. The second test simulated a controlled flight into terrain with a nose down pitch of the aircraft, and the third test simulated a controlled flight into terrain with an attempt to unsuccessfully recover the aircraft immediately prior to impact, resulting in a tail strike condition. An on-board data acquisition system (DAS) captured 64 channels of airframe acceleration, along with accelerations and loads in two onboard Hybrid II 50th percentile Anthropomorphic Test Devices (ATDs) representing the pilot and copilot. Each of the three tests contained different airframe loading conditions and different types of restraints for both the pilot and co-pilot ATDs. The results show large differences in occupant response and restraint performance with varying likelihoods of occupant injury.

Crashworthiness of Aluminium Tubes; Part 2: Improvement of Hydroforming Operation to Increase Absorption Energy

DOE Office of Scientific and Technical Information (OSTI.GOV)

D'Amours, Guillaume; Rahem, Ahmed; Mayer, Robert

2007-05-17

The motivation to reduce overall vehicle weight within the automotive sector drives the substitution of lightweight materials such as aluminium alloys for structural components. Such a substitution requires a significant amount of development to manufacture structurally parts such that the energy absorption characteristics are not sacrificed in the event of crash. The effects of the manufacturing processes on the crash performance of automotive structural components must be better understood to ensure improved crashworthiness. This paper presents results of an experimental and numerical investigation of the crash response and energy absorption properties of impacted hydroformed aluminium alloy tubes. Crash experiments onmore » hydroformed tubes were performed using a deceleration sled test at the General Motors Technical Center. Results from axial crush testing showed that an important parameter that influences the energy absorption characteristics during crash was the thickness reduction caused by circumferential expansion of the tube during hydroforming. It was found that that the energy absorption decreased as the corner radius decreased, which results because of increased thinning. Sensitivity studies of end feeding parameters, such as end feed level and profile, were carried out to evaluate their impact on the energy absorption of the aluminium tubes.« less

Crashworthiness of Aluminium Tubes; Part 2: Improvement of Hydroforming Operation to Increase Absorption Energy

NASA Astrophysics Data System (ADS)

D'Amours, Guillaume; Rahem, Ahmed; Mayer, Robert; Williams, Bruce; Worswick, Michael

2007-05-01

The motivation to reduce overall vehicle weight within the automotive sector drives the substitution of lightweight materials such as aluminium alloys for structural components. Such a substitution requires a significant amount of development to manufacture structurally parts such that the energy absorption characteristics are not sacrificed in the event of crash. The effects of the manufacturing processes on the crash performance of automotive structural components must be better understood to ensure improved crashworthiness. This paper presents results of an experimental and numerical investigation of the crash response and energy absorption properties of impacted hydroformed aluminium alloy tubes. Crash experiments on hydroformed tubes were performed using a deceleration sled test at the General Motors Technical Center. Results from axial crush testing showed that an important parameter that influences the energy absorption characteristics during crash was the thickness reduction caused by circumferential expansion of the tube during hydroforming. It was found that that the energy absorption decreased as the corner radius decreased, which results because of increased thinning. Sensitivity studies of end feeding parameters, such as end feed level and profile, were carried out to evaluate their impact on the energy absorption of the aluminium tubes.

Real-world injury patterns associated with Hybrid III sternal deflections in frontal crash tests.

PubMed

Brumbelow, Matthew L; Farmer, Charles M

2013-01-01

This study investigated the relationship between the peak sternal deflection measurements recorded by the Hybrid III 50th percentile male anthropometric test device (ATD) in frontal crash tests and injury and fatality outcomes for drivers in field crashes. ATD sternal deflection data were obtained from the Insurance Institute for Highway Safety's 64 km/h, 40 percent overlap crashworthiness evaluation tests for vehicles with seat belt crash tensioners, load limiters, and good-rated structure. The National Automotive Sampling System Crashworthiness Data System (NASS-CDS) was queried for frontal crashes of these vehicles in which the driver was restrained by a seat belt and air bag. Injury probability curves were calculated by frontal crash type using the injuries coded in NASS-CDS and peak ATD sternal deflection data. Fatality Analysis Reporting System (FARS) front-to-front crashes with exactly one driver death were also studied to determine whether the difference in measured sternal deflections for the 2 vehicles was related to the odds of fatality. For center impacts, moderate overlaps, and large overlaps in NASS-CDS, the probability of the driver sustaining an Abbreviated Injury Scale (AIS) score ≥ 3 thoracic injury, or any nonextremity AIS ≥ 3 injury, increased with increasing ATD sternal deflection measured in crash tests. For small overlaps, however, these probabilities decreased with increasing deflection. For FARS crashes, the fatally injured driver more often was in the vehicle with the lower measured deflection in crash tests (55 vs. 45%). After controlling for other factors, a 5-mm difference in measured sternal deflections between the 2 vehicles was associated with a fatality odds ratio of 0.762 for the driver in the vehicle with the greater deflection (95% confidence interval = 0.373, 1.449). Restraint systems that reduce peak Hybrid III sternal deflection in a moderate overlap crash test are beneficial in real-world crashes with similar or greater overlap but likely have a disbenefit in crashes with small overlap. This may occur because belt-force limiters employed to control deflections allow excursion that could produce contact with interior vehicle components in small overlaps, given the more oblique occupant motion and potential inboard movement of the air bag. Although based on a limited number of cases, this interpretation is supported by differences in skeletal fracture locations among drivers in crashes with different overlaps. Current restraint systems could be improved by designs that reduce sternal deflection in moderate and large overlap crashes without increasing occupant excursion in small overlap crashes.

Crash simulation of UNS electric vehicle under frontal front impact

DOE Office of Scientific and Technical Information (OSTI.GOV)

Susilo, D. D., E-mail: djoksus-2010@yahoo.com; Lukamana, N. I., E-mail: n.indra.lukmana@gmail.com; Budiana, E. P., E-mail: budiana.e@gmail.com

Sebelas Maret University has been developing an Electric Vehicle namely SmarT-EV UNS. The main structure of the car are chasis and body. The chasis is made from steel and the body is made from fiberglass composite. To ensure the safety of the car, both static and dynamic tests were carried out to these structures, including their materials, like: tensile test, bending test, and impact test. Another test needed by this vehicle is crashworthiness test. To perform the test, it is needed complex equipments and it is quite expensive. Another way to obtain vehicle crashworthiness behaviour is by simulate it. Themore » purpose of this study was to simulate the response of the Smart-EV UNS electric vehicle main structure when crashing rigid barrier from the front. The crash simulation was done in according to the NHTSA (National Highway Traffic Safety Administration) within the speed of the vehicle of 35 mph. The UNS Electric Vehicle was modelled using SolidWorks software, and the simulation process was done by finite element method using ANSYS software. The simulation result showed that the most internal impact energy was absorbed by chassis part. It absorbed 76.2% of impact energy, then the base absorbed 11.3 %, while the front body absorbed 2.5 %, and the rest was absorbed by fender, hood, and other parts.« less

The impact of cognitive deficit on self-reported car crashes in ultra-octogenarian population: data of an Italian population-based study.

PubMed

Rozzini, Luca; Riva, Maddalena; Zanetti, Marina; Gottardi, Federica; Caratozzolo, Salvatore; Vicini Chilovi, Barbara; Trabucchi, Marco; Padovani, Alessandro

2013-06-01

To examine the usefulness of specific neurocognitive tests for predicting the crash involvement in ultra-octogenarian population. A total of 800 subjects (mean age 82.4 + 3.1 years) underwent a battery of neuropsychological tests. Global intellectual functioning was assessed using the Mini Mental State Examination, mental flexibility and information processing speed were assessed using the Trail Making Test parts A and B (TMT-A and TMT-B), long-term memory was evaluated with the short story, and visuo-spatial skills were tested with Clock Drawing Test. One year after this evaluation, 343 (43%) participants have been interviewed by a telephone call to know if they were currently driving and if they had a car crash during this period. Two hundred ninety-seven subjects had their driving license renewed and completed the follow-up 1 year after. Data shows that less than 11% of this group had a car crash during the first year of observation (Crash Involved). Older subjects involved in a car crash showed significant worse performances on TMT-B (TMT-B pathological Crash Involved vs. Noncrash Involved 47% vs. 27%; p = 0.02) and on short story (short story pathological Crash Involved vs. Noncrash Involved 19% vs. 5%; p = 0.02). Trail Making test B and short story have been demonstrated to provide a predictive value of driving performance of older people. Therefore, we suggest that a simple and standardized battery of neuropsychological tests, lasting about 30 min and administered by an experienced staff, is a good diagnostic instrument for risk prevention of driving activity of older drivers. Copyright © 2012 John Wiley & Sons, Ltd.

Factors Related to Fatal Injury in Frontal Crashes Involving European Cars

PubMed Central

Frampton, Richard; Page, Marianne; Thomas, Pete

2006-01-01

Despite considerable improvements in frontal impact crashworthiness, frontal crashes still account for a major number of front seat occupant fatalities in Great Britain. This study attempted to determine the remaining potential for further fatality reduction with passive safety improvements in frontal crashes. No evidence was found to support an increase in crash test speeds. Instead, assessment of scope for survival showed that at least 27% of all fatal drivers and 39% of all fatal front seat passengers have survival potential given attention to older occupant’s chest injury tolerance and passenger compartment intrusion under 60 km/h. Considering only fatal frontal crashes that might be assessed with a barrier test, showed an estimated survival potential of at least 49% of belted drivers and 60% of belted front seat passengers. The high proportion of unbelted fatalities suggested that targeting unbelted occupant protection could have additional benefit. PMID:16968628

A train-to-train impact test of crash energy management passenger rail equipment

DOT National Transportation Integrated Search

2006-12-04

This paper gives an overview of the in-line full-scale impact tests conducted by the Federal : Railroad Administration and discusses a strategy for preventing override between colliding : equipment. Override of the impacting equipment during a passen...

A review of the analytical simulation of aircraft crash dynamics

NASA Technical Reports Server (NTRS)

Fasanella, Edwin L.; Carden, Huey D.; Boitnott, Richard L.; Hayduk, Robert J.

1990-01-01

A large number of full scale tests of general aviation aircraft, helicopters, and one unique air-to-ground controlled impact of a transport aircraft were performed. Additionally, research was also conducted on seat dynamic performance, load-limiting seats, load limiting subfloor designs, and emergency-locator-transmitters (ELTs). Computer programs were developed to provide designers with methods for predicting accelerations, velocities, and displacements of collapsing structure and for estimating the human response to crash loads. The results of full scale aircraft and component tests were used to verify and guide the development of analytical simulation tools and to demonstrate impact load attenuating concepts. Analytical simulation of metal and composite aircraft crash dynamics are addressed. Finite element models are examined to determine their degree of corroboration by experimental data and to reveal deficiencies requiring further development.

Survey of NASA research on crash dynamics

NASA Technical Reports Server (NTRS)

Thomson, R. G.; Carden, H. D.; Hayduk, R. J.

1984-01-01

Ten years of structural crash dynamics research activities conducted on general aviation aircraft by the National Aeronautics and Space Administration (NASA) are described. Thirty-two full-scale crash tests were performed at Langley Research Center, and pertinent data on airframe and seat behavior were obtained. Concurrent with the experimental program, analytical methods were developed to help predict structural behavior during impact. The effects of flight parameters at impact on cabin deceleration pulses at the seat/occupant interface, experimental and analytical correlation of data on load-limiting subfloor and seat configurations, airplane section test results for computer modeling validation, and data from emergency-locator-transmitter (ELT) investigations to determine probable cause of false alarms and nonactivations are assessed. Computer programs which provide designers with analytical methods for predicting accelerations, velocities, and displacements of collapsing structures are also discussed.

Changes in baseline concussion assessment scores following a school bus crash.

PubMed

Poland, Kristin M; McKay, Mary Pat; Zonfrillo, Mark R; Barth, Thomas H; Kaminski, Ronald

2016-09-01

The objective of this article is to present concussion assessment data for 30 male athletes prior to and after being involved in a large school bus crash. The athletes on the bus, all male and aged 14-18 years, were participants in their school's concussion management program that included baseline and postinjury testing using Immediate Post-Concussion Assessment and Cognitive Testing (ImPACT). This case study described changes in concussion assessment scores for 30 male athletes following a primarily frontal school bus crash. Data from the school's concussion management program, including baseline test data and postinjury assessment data, were reviewed. Athletes who required multiple postinjury assessments by the program were identified as having had significant cognitive changes as a result of the bus crash. Twenty-nine of 30 athletes were injured. One had lumbar compression fractures; others had various lacerations, abrasions, contusions, sprains, and nasal fractures. ImPACT data (postcrash) were available for all 30 athletes and 28 had available precrash baseline data. A total of 16 athletes (53.3%) had significant cognitive changes indicated by changes in their concussion assessment scores, some of which took months to improve. This case study highlights a unique opportunity to evaluate concussion assessment data from 30 male athletes involved in a high-speed school bus crash. Further, these data provide additional insight into assessing the effectiveness of current school bus occupant protection systems.

Planar Impacts in Rollover Crashes: Significance, Distribution and Injury Epidemiology

PubMed Central

Bose, Dipan; Kerrigan, Jason R.; Foster, Jonathan B.; Crandall, Jeff R.; Tobaru, Shigeo

2011-01-01

While one third of all fatal motor vehicle crashes involve rollover of the vehicle, a substantially large portion of these rollover crashes involve planar impacts (e.g., frontal, side or rear impact) that influence the crash kinematics and subsequently the injury outcome. The objective of the study was to evaluate the distribution of planar impacts in rollover crashes, and in particular, to describe the differences in the underlying crash kinematics, injury severity and the regional distribution of injuries when compared to the rollover-dominated crashes without significant planar impact (i.e., primary rollovers). Sampled cases (n=6,900) from the U.S. National Automotive Sampling System – Crashworthiness Data System, representing approximately 3.3 million belted drivers involved in a rollover crash in years 1998–2008, were analyzed. Single vehicle rollover crashes with significant planar impact (21% of all rollover crashes) were in general more likely to result in occupant fatality and involved higher incidence of moderate to severe injuries compared to single vehicle primary rollovers (p<0.05). A substantial proportion of the planar impact rollovers ended in single quarter turn crashes (30%), mostly resulting from a frontal impact (59%). While chest was the most frequently injured body region among all rollover victims sustaining severe injuries, severe injuries sustained in primary rollovers were more isolated (single body region) in comparison to the ones sustained in rollovers with planar impacts. The results emphasize the higher risk of rollover victims sustaining an injury and the differences in distribution of injuries sustained when a planar impact is associated with the rollover crash. PMID:22105400

Development and field performance of indy race car head impact padding.

PubMed

Melvin, J W; Bock, H; Anderson, K; Gideon, T

2001-11-01

The close-fitting cockpit of the modern Indy car single seat race car has the potential to provide a high level of head and neck impact protection in rear and side impacts. Crash investigation has shown that a wide variety of materials have been used as the padding for these cockpits and, as a result, produced varying outcomes in crashes. Additionally, these pads have not always been positioned for optimal performance. The purpose of this study was to investigate the head impact performance of a variety of energy-absorbing padding materials under impact conditions typical of Indy car rear impacts and to identify superior materials and methods of improving their performance as race car head pads. An extensive series of tests with the helmeted Hybrid III test dummy head and neck on an impact mini-sled was conducted to explore head padding concepts. Following this, a performance specification for a simplified impact test using a rigid headform that simulates the helmeted head was developed and recommendations for performance levels of head padding based on biomechanical data on helmeted head impacts were made. In 1997, during the time that the head pad research was being performed, the Indy Racing League introduced a new chassis specification for their cars. There were a number of rear- and side-impact crashes during that season that resulted in seven severe head injuries. Examples of the head padding in those cars were included in the experimental study. The results of the head pad research were used to specify new padding materials that met the new biomechanical criteria. The placement of the head pads was also changed for better location of the padding. These changes instituted in 1998 have reduced the number of head injuries in crashes similar to or more severe than those of 1997 and have resulted in only occasional moderate head injuries (concussions) in the 1998 and 1999 seasons.

Two-car impact test of crash energy management passenger rail cars : analysis of occupant protection measurements

DOT National Transportation Integrated Search

2004-11-13

As a part of ongoing passenger rail equipment safety research, a full-scale impact test of two cars with energy absorbing end structures was carried out on February 26, 2004. In this test, two coupled cars impacted a rigid barrier at 29 mph. Similar ...

Effectiveness of Collision-Involved Motorcycle Helmets in Thailand

PubMed Central

Wobrock, Jesse; Smith, Terry; Kasantikul, Vira; Whiting, William

2003-01-01

The purpose of this study was to analyze variables present in selected motorcycle crashes involving helmeted riders to find the best injury predictors. The helmets used in this study were collected from motorcycle crashes in Thailand. Pertinent data were collected, a conventional helmet impact drop test apparatus was used to quantify the head impact forces, and stepwise multiple regression analyses were performed. The results indicate that the geometry of the object impacting the head and GSI were the best predictors for MAIS (R2=.875) while geometry of the object, liner thickness and impact energy were the best predictors for ISS (R2=.911). Analysis of motor vehicle crashes in the United States in the year 2001 reveals that motorcyclist fatalities increased 7.2%, from 2,862 fatalities in 2000 to 3,067 in 2001 [NHTSA 2002]. In 2001, 59,000 motorcyclists were injured, which represents an increase of 2.0% from 2000. These statistics are indicative of the risk that motorcycle riders face in the traffic environment and warrant the need for further research focusing on injury potential in motorcycle crashes. PMID:12941212

Injury severity analysis in taxi-pedestrian crashes: An application of reconstructed crash data using a vehicle black box.

PubMed

Chung, Younshik

2018-02-01

In-vehicle recording devices have enabled recent changes in methodological paradigms for traffic safety research. Such devices include event data recorders (EDRs), vehicle black boxes (VBBs), and various sensors used in naturalistic driving studies (NDSs). These technologies may help improve the validity of models used to assess impacts on traffic safety. The objective of this study is to analyze the injury severity in taxi-pedestrian crashes using the accurate crash data from VBBs, such as the time-to-collision (TTC), speed, angle, and region of the crash. VBB data from a two-year period (2010-2011) were collected from taxis operating in Incheon, South Korea. An ordered probit model was then applied to analyze the injury severity in crashes. Five variables were found to have a greater effect on injury severity: crash speed, crashes in no-median sections, crashes where the secondary impact object of pedestrians was the crash vehicle, crashes where the third impact object of pedestrians was another moving vehicle, and crashes where the third impact region of pedestrians was their head. However, injuries were less severe in crashes where the first impact region on the pedestrian was their leg, crashes with the car moving in a straight line, and crashes involving junior high school students. Copyright © 2017 Elsevier Ltd. All rights reserved.

Simulating the Response of a Composite Honeycomb Energy Absorber. Part 2; Full-Scale Impact Testing

NASA Technical Reports Server (NTRS)

Fasanella, Edwin L.; Annett, Martin S.; Jackson, Karen E.; Polanco, Michael A.

2012-01-01

NASA has sponsored research to evaluate an externally deployable composite honeycomb designed to attenuate loads in the event of a helicopter crash. The concept, designated the Deployable Energy Absorber (DEA), is an expandable Kevlar(Registered TradeMark) honeycomb. The DEA has a flexible hinge that allows the honeycomb to be stowed collapsed until needed during an emergency. Evaluation of the DEA began with material characterization of the Kevlar(Registered TradeMark)-129 fabric/epoxy, and ended with a full-scale crash test of a retrofitted MD-500 helicopter. During each evaluation phase, finite element models of the test articles were developed and simulations were performed using the dynamic finite element code, LS-DYNA(Registered TradeMark). The paper will focus on simulations of two full-scale impact tests involving the DEA, a mass-simulator and a full-scale crash of an instrumented MD-500 helicopter. Isotropic (MAT24) and composite (MAT58) material models, which were assigned to DEA shell elements, were compared. Based on simulations results, the MAT58 model showed better agreement with test.

Validation of Finite Element Crash Test Dummy Models for Predicting Orion Crew Member Injuries During a Simulated Vehicle Landing

NASA Technical Reports Server (NTRS)

Tabiei, Al; Lawrence, Charles; Fasanella, Edwin L.

2009-01-01

A series of crash tests were conducted with dummies during simulated Orion crew module landings at the Wright-Patterson Air Force Base. These tests consisted of several crew configurations with and without astronaut suits. Some test results were collected and are presented. In addition, finite element models of the tests were developed and are presented. The finite element models were validated using the experimental data, and the test responses were compared with the computed results. Occupant crash data, such as forces, moments, and accelerations, were collected from the simulations and compared with injury criteria to assess occupant survivability and injury. Some of the injury criteria published in the literature is summarized for completeness. These criteria were used to determine potential injury during crew impact events.

Abdomen Impact Testing of the Hybrid III Rail Safety (H3-RS) Anthropomorphic Test Device

DOT National Transportation Integrated Search

2017-09-01

The Hybrid III Rail Safety (H3-RS) anthropomorphic test device (ATD) is a crash test dummy that was developed in the UK to evaluate abdomen and lower thorax injuries that occur when passengers impact workstation tables during train accidents. The H3-...

Testing and injury potential analysis of rollovers with narrow object impacts.

PubMed

Meyer, Steven E; Forrest, Stephen; Herbst, Brian; Hayden, Joshua; Orton, Tia; Sances, Anthony; Kumaresan, Srirangam

2004-01-01

Recent statistics highlight the significant risk of serious and fatal injuries to occupants involved in rollover collisions due to excessive roof crush. The government has reported that in 2002. Sports Utility Vehicle rollover related fatalities increased by 14% to more than 2400 annually. 61% of all SUV fatalities included rollovers [1]. Rollover crashes rely primarily upon the roof structures to maintain occupant survival space. Frequently these crashes occur off the travel lanes of the roadway and, therefore, can include impacts with various types of narrow objects such as light poles, utility poles and/or trees. A test device and methodology is presented which facilitates dynamic, repeatable rollover impact evaluation of complete vehicle roof structures with such narrow objects. These tests allow for the incorporation of Anthropomorphic Test Dummies (ATDs) which can be instrumented to measure accelerations, forces and moments to evaluate injury potential. High-speed video permits for detailed analysis of occupant kinematics and evaluation of injury causation. Criteria such as restraint performance, injury potential, survival space and the effect of roof crush associated with various types of design alternatives, countermeasures and impact circumstances can also be evaluated. In addition to presentation of the methodology, two representative vehicle crash tests are also reported. Results indicated that the reinforced roof structure significantly reduced the roof deformation compared to the production roof structure.

Analysis of naturalistic driving videos of fleet services drivers to estimate driver error and potentially distracting behaviors as risk factors for rear-end versus angle crashes.

PubMed

Harland, Karisa K; Carney, Cher; McGehee, Daniel

2016-07-03

The objective of this study was to estimate the prevalence and odds of fleet driver errors and potentially distracting behaviors just prior to rear-end versus angle crashes. Analysis of naturalistic driving videos among fleet services drivers for errors and potentially distracting behaviors occurring in the 6 s before crash impact. Categorical variables were examined using the Pearson's chi-square test, and continuous variables, such as eyes-off-road time, were compared using the Student's t-test. Multivariable logistic regression was used to estimate the odds of a driver error or potentially distracting behavior being present in the seconds before rear-end versus angle crashes. Of the 229 crashes analyzed, 101 (44%) were rear-end and 128 (56%) were angle crashes. Driver age, gender, and presence of passengers did not differ significantly by crash type. Over 95% of rear-end crashes involved inadequate surveillance compared to only 52% of angle crashes (P < .0001). Almost 65% of rear-end crashes involved a potentially distracting driver behavior, whereas less than 40% of angle crashes involved these behaviors (P < .01). On average, drivers spent 4.4 s with their eyes off the road while operating or manipulating their cell phone. Drivers in rear-end crashes were at 3.06 (95% confidence interval [CI], 1.73-5.44) times adjusted higher odds of being potentially distracted than those in angle crashes. Fleet driver driving errors and potentially distracting behaviors are frequent. This analysis provides data to inform safe driving interventions for fleet services drivers. Further research is needed in effective interventions to reduce the likelihood of drivers' distracting behaviors and errors that may potentially reducing crashes.

Full-Scale Crash Test of an MD-500 Helicopter

NASA Technical Reports Server (NTRS)

Littell, Justin

2011-01-01

A full-scale crash test was successfully conducted in March 2010 of an MD-500 helicopter at NASA Langley Research Center s Landing and Impact Research Facility. The reasons for conducting this test were threefold: 1 To generate data to be used with finite element computer modeling efforts, 2 To study the crashworthiness features typically associated with a small representative helicopter, and 3 To compare aircraft response to data collected from a previously conducted MD-500 crash test, which included an externally deployable energy absorbing (DEA) concept. Instrumentation on the airframe included accelerometers on various structural components of the airframe; and strain gages on keel beams, skid gear and portions of the skin. Three Anthropomorphic Test Devices and a specialized Human Surrogate Torso Model were also onboard to collect occupant loads for evaluation with common injury risk criteria. This paper presents background and results from this crash test conducted without the DEA concept. These results showed accelerations of approximately 30 to 50 g on the airframe at various locations, little energy attenuation through the airframe, and moderate to high probability of occupant injury for a variety of injury criteria.

Full-Scale Crash Test and Finite Element Simulation of a Composite Prototype Helicopter

NASA Technical Reports Server (NTRS)

Jackson, Karen E.; Fasanella, Edwin L.; Boitnott, Richard L.; Lyle, Karen H.

2003-01-01

A full-scale crash test of a prototype composite helicopter was performed at the Impact Dynamics Research Facility at NASA Langley Research Center in 1999 to obtain data for validation of a finite element crash simulation. The helicopter was the flight test article built by Sikorsky Aircraft during the Advanced Composite Airframe Program (ACAP). The composite helicopter was designed to meet the stringent Military Standard (MIL-STD-1290A) crashworthiness criteria and was outfitted with two crew and two troop seats and four anthropomorphic dummies. The test was performed at 38-ft/s vertical and 32.5-ft/s horizontal velocity onto a rigid surface. An existing modal-vibration model of the Sikorsky ACAP helicopter was converted into a model suitable for crash simulation. A two-stage modeling approach was implemented and an external user-defined subroutine was developed to represent the complex landing gear response. The crash simulation was executed with a nonlinear, explicit transient dynamic finite element code. Predictions of structural deformation and failure, the sequence of events, and the dynamic response of the airframe structure were generated and the numerical results were correlated with the experimental data to validate the simulation. The test results, the model development, and the test-analysis correlation are described.

A test-based method for the assessment of pre-crash warning and braking systems.

PubMed

Bálint, András; Fagerlind, Helen; Kullgren, Anders

2013-10-01

In this paper, a test-based assessment method for pre-crash warning and braking systems is presented where the effectiveness of a system is measured by its ability to reduce the number of injuries of a given type or severity in car-to-car rear-end collisions. Injuries with whiplash symptoms lasting longer than 1 month and MAIS2+ injuries in both vehicles involved in the crash are considered in the assessment. The injury reduction resulting from the impact speed reduction due to a pre-crash system is estimated using a method which has its roots in the dose-response model. Human-machine interaction is also taken into account in the assessment. The results reflect the self-protection as well as the partner-protection performance of a pre-crash system in the striking vehicle in rear-end collisions and enable a comparison between two or more systems. It is also shown how the method may be used to assess the importance of warning as part of a pre-crash system. Copyright © 2013 Elsevier Ltd. All rights reserved.

Evaluation of wheelchair back support crashworthiness: combination wheelchair back support surfaces and attachment hardware.

PubMed

Ha, D; Bertocci, G; Deemer, E; van Roosmalen, L; Karg, P

2000-01-01

Automotive seats are tested for compliance with federal motor vehicle safety standards (FMVSS) to assure safety during impact. Many wheelchair users rely upon their wheelchairs to serve as vehicle seats. However, the crashworthiness of these wheelchairs during impact is often unknown. This study evaluated the crashworthiness of five combinations of wheelchair back support surfaces and attachment hardware using a static test procedure simulating crash loading conditions. The crashworthiness was tested by applying a simulated rearward load to each seat-back system. The magnitude of the applied load was established through computer simulation and biodynamic calculations. None of the five tested wheelchair back supports withstood the simulated crash loads. All failures were associated with attachment hardware.

Relationship between pedestrian headform tests and injury and fatality rates in vehicle-to-pedestrian crashes in the United States.

PubMed

Mueller, Becky; Farmer, Charles; Jermakian, Jessica; Zuby, David

2013-11-01

Pedestrian protection evaluations have been developed to encourage vehicle front-end designs that mitigate the consequences of vehicle-to-pedestrian crashes. The European New Car Assessment Program (Euro NCAP) evaluates pedestrian head protection with impacts against vehicle hood, windshield, and A-pillars. The Global Technical Regulation No. 9 (GTR 9), being evaluated for U.S. regulation, limits head protection evaluations to impacts against vehicle hoods. The objective of this study was to compare results from pedestrian head impact testing to the real-world rates of fatal and incapacitating injuries in U.S. pedestrian crashes. Data from police reported pedestrian crashes in 14 states were used to calculate real-world fatal and in- capacitating injury rates for seven 2002-07 small cars. Rates were 2.17-4.04 per 100 pedestrians struck for fatal injuries and 10.45-15.35 for incapacitating injuries. Euro NCAP style pedestrian headform tests were conducted against windshield, A-pillar, and hoods of the study vehicles. When compared with pedestrian injury rates, the vehicles' Euro NCAP scores, ranging 5-10 points, showed strong negative correlations (-0.6) to injury rates, though none were statistically significant. Data from the headform impacts for each of the study vehicles were used to calculate that vehicle's predicted serious injury risk. The predicted risks from both the Euro NCAP and GTR 9 test zones showed high positive correlations with the pedestrian fatal and incapacitating injury rates, though few were statistically significant. Whether vehicle stiffness is evaluated on all components of vehicle front ends (Euro NCAP) or is limited to hoods (GTR 9), softer vehicle components correspond to a lower risk of fatality.

Injury and side impact air bag deployment in near and far sided motor vehicle crashes, United States, 2000-2005.

PubMed

Stadter, Greg; Grabowski, Jurek G; Burke, Christine; Aldaghlas, Tayseer A; Robinson, Linda; Fakhry, Samir M

2008-12-01

Side impact crashes, the most lethal type, account for 26% of all motor vehicle crashes in the United States. The purpose of this study is to delineate side impact airbag (SIAB) deployment rates, injury rates, and analyze crash factors associated with SIAB deployment and occupant injury. All passenger vehicles equipped with SIABs that were involved in a side impact crash were identified from the National Automotive Sampling System database. Crashes with multiple impacts, ejections, unbelted drivers or rollovers were excluded from the study. The outcome variables of interest were SIAB deployment and driver injury. SIAB deployment was compared in similar crashes to analyze the impact on driver's injury severity score. Other crash factors were also examined to analyze what role they play in SIAB deployment rates and injury rates, such as plane of contact, striking object and Delta-V. The data set for this study contained 247 drivers in near and far side crashes in vehicles with installed SIABs. Overall SIAB deployment was 43% in side impact crashes. A significant factor associated with both the SIAB deployment rate and the driver's injury rate was increased Delta-V. SIABs do not deploy consistently in crashes with a high Delta-V or with a lateral primary direction of force and a front plane of contact. In these two scenarios, further research is warranted on SIAB deployments. With SIAB deployment, it appears drivers are able to sustain a higher Delta-V impact without serious injury.

Attempts at the practical on-road driving test and the hazard perception test and the risk of traffic crashes in young drivers.

PubMed

Boufous, Soufiane; Ivers, Rebecca; Senserrick, Teresa; Stevenson, Mark

2011-10-01

This study separately examined the impact of the outcomes of a practical on-road driving test and a hazard perception test on the likelihood of traffic crashes among a cohort of newly licensed young drivers in New South Wales (NSW), Australia. The DRIVE study is a prospective cohort study of drivers aged 17 to 24 years holding their first-year provisional driver license in NSW. Information obtained from 20,822 participants in a detailed baseline questionnaire was linked to information on the number of attempts at a mandatory practical on-road driving test and hazard perception test as well as police-reported traffic crashes. After controlling for a number of sociodemographic and behavioral factors as well as factors related to driver learning experiences, multivariate analysis showed that those who failed the practical on-road test at least 4 times had an increased risk of involvement in a traffic crash compared to those who passed the test at first attempt (relative risk [RR]: 1.79, 95% confidence interval [CI]: 1.20-2.65). The crash risk among those who failed the practical on-road test at least 4 times was particularly high in females (RR: 2.10, 95% CI: 1.20-3.68). Similarly, those who failed the hazard perception test at least twice had an increased risk of involvement in a traffic crash (RR: 1.83, 95% CI: 1.27-2.63) compared to those who passed the test on the first attempt. The crash risk of those who failed the hazard perception test at least twice was particularly high in males (RR: 2.5, 95% CI: 1.5-4.1) and among those from rural and remote areas (RR: 5.53, 95% CI: 1.63-18.71). The findings have implications on licensing practices and suggest the need for adequate strategies to assist young drivers with multiple failures in the driving and hazard perception tests.

[Artefacts of questionnaire-based psychological testing of drivers].

PubMed

Łuczak, Anna; Tarnowski, Adam

2014-01-01

The purpose of this article is to draw attention to a significant role of social approval variable in the qustionnaire-based diagnosis of drivers' psychological aptitude. Three questionnaires were used: Formal Characteristics of Behavior - Temperament Inventory (FCB-TI), Eysenck Personality Questionnaire (EPQ-R(S) and Impulsiveness Questionnaire (Impulsiveness, Venturesomeness, Empathy - IVE). Three groups of drivers were analyzed: professional "without crashes" (N = 46), nonprofessional "without crashes" (N = 75), and nonprofessional "with crashes" (N = 75). Nonprofessional drivers "without crashes" significantly stood up against other drivers. Their personality profile, indicating a significantly utmost perseveration, emotional reactivity, neuroticism, impulsiveness and the lowest endurance did not fit in to the requirements to be met by drivers. The driver safety profile was characteristic of professional drivers (the lowest level of perseveration, impulsiveness and neuroticism and the highest level of endurance). Similar profile occurred among nonprofessional drivers--the offenders of road crashes. Compared to the nonprofessional "without crashes" group, professional drivers and offenders of road crashes were also characterized by a significantly higher score on the Lie scale, determining the need for social approval. This is likely to result from the study procedure according to which the result of professional drivers testing had an impact on a possible continuity of their job and that of nonprofessional drivers "with crashes" decided about possible recovery of the driving license. The variable of social approval can be a significant artifact in the study of psychological drivers' testing and reduce the reliability of the results of questionnaire methods.

Average male and female virtual dummy model (BioRID and EvaRID) simulations with two seat concepts in the Euro NCAP low severity rear impact test configuration.

PubMed

Linder, Astrid; Holmqvist, Kristian; Svensson, Mats Y

2018-05-01

Soft tissue neck injuries, also referred to as whiplash injuries, which can lead to long term suffering accounts for more than 60% of the cost of all injuries leading to permanent medical impairment for the insurance companies, with respect to injuries sustained in vehicle crashes. These injuries are sustained in all impact directions, however they are most common in rear impacts. Injury statistics have since the mid-1960s consistently shown that females are subject to a higher risk of sustaining this type of injury than males, on average twice the risk of injury. Furthermore, some recently developed anti-whiplash systems have revealed they provide less protection for females than males. The protection of both males and females should be addresses equally when designing and evaluating vehicle safety systems to ensure maximum safety for everyone. This is currently not the case. The norm for crash test dummies representing humans in crash test laboratories is an average male. The female part of the population is not represented in tests performed by consumer information organisations such as NCAP or in regulatory tests due to the absence of a physical dummy representing an average female. Recently, the world first virtual model of an average female crash test dummy was developed. In this study, simulations were run with both this model and an average male dummy model, seated in a simplified model of a vehicle seat. The results of the simulations were compared to earlier published results from simulations run in the same test set-up with a vehicle concepts seat. The three crash pulse severities of the Euro NCAP low severity rear impact test were applied. The motion of the neck, head and upper torso were analysed in addition to the accelerations and the Neck Injury Criterion (NIC). Furthermore, the response of the virtual models was compared to the response of volunteers as well as the average male model, to that of the response of a physical dummy model. Simulations with the virtual male and female dummy models revealed differences in dynamic response related to the crash severity, as well as between the two dummies in the two different seat models. For the comparison of the response of the virtual models to the response of the volunteers and the physical dummy model, the peak angular motion of the first thoracic vertebra as found in the volunteer tests and mimicked by the physical dummy were not of the same magnitude in the virtual models. The results of the study highlight the need for an extended test matrix that includes an average female dummy model to evaluate the level of occupant protection different seats provide in vehicle crashes. This would provide developers with an additional tool to ensure that both male and female occupants receive satisfactory protection and promote seat concepts that provide the best possible protection for the whole adult population. This study shows that using the mathematical models available today can provide insights suitable for future testing. Copyright © 2017 Elsevier Ltd. All rights reserved.

Impact of roadway geometric features on crash severity on rural two-lane highways.

PubMed

Haghighi, Nima; Liu, Xiaoyue Cathy; Zhang, Guohui; Porter, Richard J

2018-02-01

This study examines the impact of a wide range of roadway geometric features on the severity outcomes of crashes occurred on rural two-lane highways. We argue that crash data have a hierarchical structure which needs to be addressed in modeling procedure. Moreover, most of previous studies ignored the impact of geometric features on crash types when developing crash severity models. We hypothesis that geometric features are more likely to determine crash type, and crash type together with other occupant, environmental and vehicle characteristics determine crash severity outcome. This paper presents an application of multilevel models to successfully capture both hierarchical structure of crash data and indirect impact of geometric features on crash severity. Using data collected in Illinois from 2007 to 2009, multilevel ordered logit model is developed to quantify the impact of geometric features and environmental conditions on crash severity outcome. Analysis results revealed that there is a significant variation in severity outcomes of crashes occurred across segments which verifies the presence of hierarchical structure. Lower risk of severe crashes is found to be associated with the presence of 10-ft lane and/or narrow shoulders, lower roadside hazard rate, higher driveway density, longer barrier length, and shorter barrier offset. The developed multilevel model offers greater consistency with data generating mechanism and can be utilized to evaluate safety effects of geometric design improvement projects. Published by Elsevier Ltd.

Meso-modeling of Carbon Fiber Composite for Crash Safety Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lin, Shih-Po; Chen, Yijung; Zeng, Danielle

2017-04-06

In the conventional approach, the material properties for crash safety simulations are typically obtained from standard coupon tests, where the test results only provide single layer material properties used in crash simulations. However, the lay-up effects for the failure behaviors of the real structure were not considered in numerical simulations. Hence, there was discrepancy between the crash simulations and experimental tests. Consequently, an intermediate stage is required for accurate predictions. Some component tests are required to correlate the material models in the intermediate stage. In this paper, a Mazda Tube under high-impact velocity is chosen as an example for themore » crash safety analysis. The tube consists of 24 layers of uni-directional (UD) carbon fiber composite materials, in which 4 layers are perpendicular to, while the other layers are parallel to the impact direction. An LS-DYNA meso-model was constructed with orthotropic material models counting for the single-layer material behaviors. Between layers, a node-based tie-break contact was used for modeling the delamination of the composite material. Since fiber directions are not single-oriented, the lay-up effects could be an important effect. From the first numerical trial, premature material failure occurred due to the use of material parameters obtained directly from the coupon tests. Some parametric studies were conducted to identify the cause of the numerical instability. The finding is that the material failure strength used in the numerical model needs to be enlarged to stabilize the numerical model. Some hypothesis was made to provide the foundation for enlarging the failure strength and the corresponding experiments will be conducted to validate the hypothesis.« less

Factors affecting pelvic and thoracic forces in near-side impact crashes: a study of US-NCAP, NASS, and CIREN data.

PubMed

Tencer, Allan F; Kaufman, Robert; Mack, Christopher; Mock, Charles

2005-03-01

The goal of this study was to identify variables related to vehicle design which are associated with pelvic and thoracic accelerations as measured by the driver's (near side) crash dummy during new car assessment program (NCAP) testing of motor vehicles. Vehicle specific parameters were analyzed using NCAP side impact test results. Data from national automotive sampling system, crashworthiness data system (NASS-CDS) and crash injury research and engineering network (CIREN) (both National Highway Traffic Safety Administration (NHTSA) injury databases) were assessed to confirm NCAP test observations. In addition, door armrest stiffness measurements were performed using a mechanical tester on a sample of 40 vehicles. NCAP data showed that of 10 variables tested using multiple linear regression, vehicle weight and door crush correlated with pelvic acceleration of the driver's crash dummy (overall, r2=0.58, p=0.002, n=165). For thoracic trauma index (TTI) vehicle weight and peak door velocity correlated, significantly (overall, r2=0.41, p=0.03, n=165). Mean TTI was 63.7 g with no side airbag (n=108) and 55.6 g with a thoracic side airbag (n=54), p=0.01. The mean vehicle weight and door crush between airbag and no airbag groups were not significantly different. NASS-CDS data demonstrated a direct relationship between increased door crush and increased abbreviated injury score (AIS). CIREN data showed that occupants who sustained pelvic injuries had a median AIS of 3 with 24.9 cm of door crush, with abdominal injuries, a median AIS of 3 and 30 cm of crush, and with thoracic injuries, a median AIS of 4 and 34 cm of door crush. In addition, the frequency of bilateral pelvic injuries was significantly higher for subjects in CIREN crashes who were in a vehicle with a center console, but only if door intrusion was greater than 15 cm. This information may be useful in design of vehicles with greater protection in side impact crashes.

Testing of state roadside safety systems. Volume I, Technical report

DOT National Transportation Integrated Search

1999-04-01

The purpose of this study is to crash test and evaluate new or modified roadside safety hardware and, where necessary, redesign the devices to improve their impact performance. The three major areas addressed in this study are the impact performance ...

Bumper and grille airbags concept for enhanced vehicle compatibility in side impact: phase II.

PubMed

Barbat, Saeed; Li, Xiaowei; Prasad, Priya

2013-01-01

Fundamental physics and numerous field studies have shown a higher injury and fatality risk for occupants in smaller and lighter vehicles when struck by heavier, taller and higher vehicles. The consensus is that the significant parameters influencing compatibility in front-to-side crashes are geometric interaction, vehicle stiffness, and vehicle mass. The objective of this research is to develop a concept of deployable bumper and grille airbags for improved vehicle compatibility in side impact. The external airbags, deployed upon signals from sensors, may help mitigate the effect of weight, geometry and stiffness differences and reduce side intrusions. However, a highly reliable pre-crash sensing system is required to enable the reliable deployment, which is currently not technologically feasible. Analytical and numerical methods and hardware testing were used to help develop the deployable external airbags concept. Various Finite Element (FE) models at different stages were developed and an extensive number of iterations were conducted to help optimize airbag and inflator parameters to achieve desired targets. The concept development was executed and validated in two phases. This paper covers Phase II ONLY, which includes: (1) Re-design of the airbag geometry, pressure, and deployment strategies; (2) Further validation using a Via sled test of a 48 kph perpendicular side impact of an SUV-type impactor against a stationary car with US-SID-H3 crash dummy in the struck side; (3) Design of the reaction surface necessary for the bumper airbag functionality. The concept was demonstrated through live deployment of external airbags with a reaction surface in a full-scale perpendicular side impact of an SUV against a stationary passenger car at 48 kph. This research investigated only the concept of the inflatable devices since pre-crash sensing development was beyond the scope of this research. The concept design parameters of the bumper and grille airbags are presented in this paper. Full vehicle-to-vehicle crash test results, Via sled test, and simulation results are also presented. Head peak acceleration, Head Injury Criteria (HIC), Thoracic Trauma Index (TTI), and Pelvic acceleration for the SID-H3 dummy and structural intrusion profiles were used as performance metrics for the bumper and grille airbags. Results obtained from the Via sled tests and the full vehicle-to-vehicle tests with bumper and grille airbags were compared to those of baseline test results with no external airbags.

Analysis of delta velocity and PDOF by means of collision partner and structural involvement in real-life crash pulses with modern passenger cars.

PubMed

Iraeus, Johan; Lindquist, Mats

2014-01-01

In the widely used National Automotive Sampling System (NASS)-Crashworthiness Data System (CDS) database, summary metrics that describe crashes are available. Crash angle or principal direction of force (PDOF) is estimated by the crash examiner and velocity changes (ΔV) in the x- and y-directions are calculated by the WinSMASH computer program using PDOF and results from rigid barrier crash testing combined with deformations of the crashed car. In recent years, results from event data recorders (EDRs) have been added to the database. The aim of this study is to compare both PDOF and ΔV between EDR measurements and WinSMASH calculations. NASS-CDS inclusion criteria were model-year 2000 through 2010 automobiles, frontal crashes with ΔV higher than 16 km/h, and the pulse entirely recorded in the EDR module. This resulted in 649 cases. The subject vehicles were further examined and characterized with regard to frontal structure engagement (large or small overlap) as well as collision properties of the partner (impact location; front, side, or back) or object. The EDR crash angle was calculated as the angle between the lateral and longitudinal ΔV at the time of peak longitudinal ΔV. This angle was compared to the NASS-CDS investigator's estimated PDOF with regard to structural engagement and the collision partner or object. Multiple linear regression was used to establish adjustment factors on ΔV and crash angle between the results calculated based on EDR recorded data and that estimated in NASS-CDS. According to this study, simulation in the newest WinSMASH version (2008) underestimates EDR ΔV by 11 percent for large overlap crashes and 17 percent for small overlap impacts. The older WinSMASH version, used prior to 2008, underestimated each one of these two groups by an additional 7 percentage points. Another significant variable to enhance the prediction was whether the crash examiner had reported the WinSMASH estimated ΔV as low or high. In this study, none of the collision partner groups was significantly different compared to front-to-front impacts. However, with a larger data set a couple of configurations may very well be significantly different. In this study, the crash angle denoted by PDOF in the NASS database underestimates the crash angle calculated from recent EDR modules by 35 percent. On average the ΔV and crash angle are underestimated in NASS-CDS when analyzing the data based on collision partner/object and structural engagement. The largest difference is found in small overlap crashes and the least difference in collision scenarios similar to barrier tests. Supplemental materials are available for this article. Go to the publisher's online edition of Traffic Injury Prevention to view the supplemental file.

NACA Researcher Sets up a Test of a New Seat Design

NASA Image and Video Library

1954-05-21

A researcher at the National Advisory Committee for Aeronautics (NACA) Lewis Flight Propulsion Laboratory prepares for a test of an NACA-designed aircraft seat. The laboratory had undertaken a multi-year investigation into the causes and prevention of fires on low altitude aircraft crashes. The program was expanded in the mid-1950s to include the study of impact on passengers, types of seat restraints, and seat design. The crash impact portion of the program began by purposely wrecking surplus Fairchild C-82 Packet and Piper Cub aircraft into barricades at the end of a test runway at the Ravenna Arsenal, located approximately 40 miles south of the Lewis lab in Cleveland. Instrumented dummies and cameras were installed in the pilot and passenger areas. After determining the different loads and their effects on the passengers, the NACA researchers began designing new types of seats and restraints. The result was an elastic seat that flexed upon impact, absorbing 75 percent of the loads before it slowly recoiled. This photograph shows the seats mounted on a pendulum with a large spring behind the platform to provide the jolt that mimicked the forces of a crash. The seat was constructed without any potentially damaging metal parts and included rubber-like material, an inflated back and arms, and a seat cushion. After the pendulum tests, the researchers compared the flexible seats to the rigid seats during a crash of a transport aircraft. They found the passengers in the rigid seats received 66 percent higher g-forces than the NACA-designed seats.

Injury reduction opportunities of far side impact countermeasures.

PubMed

Bostrom, Ola; Gabler, Hampton C; Digges, Kennerly; Fildes, Brian; Sunnevang, Cecilia

2008-10-01

Over 17,000 non-struck or far side occupants in side and rollover crashes are seriously or fatally injured annually in the US. Although no legal or rating tests exist for far side crashes, test methods including appropriate dummies as well as countermeasures have been recently suggested. The aim of this study was to establish the incidence and risk of injury / fatality as a function of vehicle change in velocity (Deltav) for the most frequent injuries of belted, far side occupants in side impacts. The study was based upon the NASS/CDS 1995-2006 records of 5,653 occupants exposed to a far side crash. 401 of these were seriously or fatally injured. Combining this data with new and previously published crash test results, the potential opportunities of various concepts of far side countermeasures were evaluated. Head/thorax injuries caused by interaction with the struck side interior were found to dominate. Countermeasures such as side support airbags and altered three-point belt geometry (e.g. four-point belts) are relevant for Deltav of at least 20-30 km/h. The opportunity for mitigating AIS3+ injuries in these severity ranges was found to be 19%- 57%. Countermeasures such as struck-side curtains are able to provide cushioning at Deltav 30 to 50 km/h, which would cover almost a third of all fatalities.

Sensitivity of head and cervical spine injury measures to impact factors relevant to rollover crashes.

PubMed

Mattos, G A; Mcintosh, A S; Grzebieta, R H; Yoganandan, N; Pintar, F A

2015-01-01

Serious head and cervical spine injuries have been shown to occur mostly independent of one another in pure rollover crashes. In an attempt to define a dynamic rollover crash test protocol that can replicate serious injuries to the head and cervical spine, it is important to understand the conditions that are likely to produce serious injuries to these 2 body regions. The objective of this research is to analyze the effect that impact factors relevant to a rollover crash have on the injury metrics of the head and cervical spine, with a specific interest in the differentiation between independent injuries and those that are predicted to occur concomitantly. A series of head impacts was simulated using a detailed finite element model of the human body, the Total HUman Model for Safety (THUMS), in which the impactor velocity, displacement, and direction were varied. The performance of the model was assessed against available experimental tests performed under comparable conditions. Indirect, kinematic-based, and direct, tissue-level, injury metrics were used to assess the likelihood of serious injuries to the head and cervical spine. The performance of the THUMS head and spine in reconstructed experimental impacts compared well to reported values. All impact factors were significantly associated with injury measures for both the head and cervical spine. Increases in impact velocity and displacement resulted in increases in nearly all injury measures, whereas impactor orientation had opposite effects on brain and cervical spine injury metrics. The greatest cervical spine injury measures were recorded in an impact with a 15° anterior orientation. The greatest brain injury measures occurred when the impactor was at its maximum (45°) angle. The overall kinetic and kinematic response of the THUMS head and cervical spine in reconstructed experiment conditions compare well with reported values, although the occurrence of fractures was overpredicted. The trends in predicted head and cervical spine injury measures were analyzed for 90 simulated impact conditions. Impactor orientation was the only factor that could potentially explain the isolated nature of serious head and spine injuries under rollover crash conditions. The opposing trends of injury measures for the brain and cervical spine indicate that it is unlikely to reproduce the injuries simultaneously in a dynamic rollover test.

49 CFR 572.111 - General description.

Code of Federal Regulations, 2010 CFR

2010-10-01

... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) ANTHROPOMORPHIC TEST DEVICES Side Impact Hybrid Dummy... before being used in vehicle tests specified in Standard 201. (c) Disassembly, inspection and assembly..., “Sign Convention for Vehicle Crash Testing.” ...

Evaluation of wheelchair drop seat crashworthiness.

PubMed

Bertocci, G; Ha, D; van Roosmalen, L; Karg, P; Deemer, E

2001-05-01

Wheelchair seating crash performance is critical to protecting wheelchair users who remain seated in their wheelchairs during transportation. Relying upon computer simulation and sled testing seat loads associated with a 20 g/48 kph (20 g/30 mph) frontal impact and 50th percentile male occupant were estimated to develop test criteria. Using a static test setup we evaluated the performance of various types of commercially available drop seats against the loading test criteria. Five different types of drop seats (two specimens each) constructed of various materials (i.e. plastics, plywood, metal) were evaluated. Two types of drop seats (three of the total 10 specimens) met the 16650 N (3750 lb) frontal impact test criteria. While additional validation of the test protocol is necessary, this study suggests that some drop seat designs may be incapable of withstanding crash level loads.

Crash Testing and Simulation of a Cessna 172 Aircraft: Hard Landing Onto Concrete

NASA Technical Reports Server (NTRS)

Jackson, Karen E.; Fasanella, Edwin L.

2016-01-01

A full-scale crash test of a Cessna 172 aircraft was conducted at the Landing and Impact Research Facility at NASA Langley Research Center during the summer of 2015. The purpose of the test was to evaluate the performance of Emergency Locator Transmitters (ELTs) that were mounted at various locations in the aircraft and to generate impact test data for model validation. A finite element model of the aircraft was developed for execution in LSDYNA to simulate the test. Measured impact conditions were 722.4-in/s forward velocity and 276-in/s vertical velocity with a 1.5deg pitch (nose up) attitude. These conditions were intended to represent a survivable hard landing. The impact surface was concrete. During the test, the nose gear tire impacted the concrete, followed closely by impact of the main gear tires. The main landing gear spread outward, as the nose gear stroked vertically. The only fuselage contact with the impact surface was a slight impact of the rearmost portion of the lower tail. Thus, capturing the behavior of the nose and main landing gear was essential to accurately predict the response. This paper describes the model development and presents test-analysis comparisons in three categories: inertial properties, time sequence of events, and acceleration and velocity time-histories.

Characteristics of the Injury Environment in Far-Side Crashes

PubMed Central

Digges, K.; Gabler, H; Mohan, P.; Alonso, B.

2005-01-01

The population of occupants in far-side crashes that are documented in the US National database (NASS/CDS) was studied. The annual number of front seat occupants with serious or fatal injuries in far-side planar and rollover crashes was 17,194. The crash environment that produces serious and fatal injuries to belted front seat occupants in planar far-side crashes was investigated in detail. It was found that both the change in velocity and extent of damage were important factors that relate to crash severity. The median severity for crashes with serious or fatal injuries was a lateral delta-V of 28 kph and an extent of damage of CDC 3.6. Vehicle-to-vehicle impacts were simulated by finite element models to determine the intrusion characteristics associated with the median crash condition. These simulations indicated that the side damage caused by the IIHS barrier was representative of the damage in crashes that produce serious injuries in far-side crashes. Occupant simulations of the IIHS barrier crash at 28 kph showed that existing dummies lack biofidelity in upper body motion. The analysis suggested test conditions for studying far-side countermeasures and supported earlier studies that showed the need for an improved dummy to evaluate safety performance in the far-side crash environment. PMID:16179148

Instrumentation and data acquisition for full-scale aircraft crash testing

NASA Technical Reports Server (NTRS)

Jones, Lisa E.; Fasanella, Edwin L.

1993-01-01

The Landing and Impact Dynamics Branch of the NASA Langley Research Center has been conducting full-scale aircraft crash tests since the 1970s. Using a pendulum method, aircraft are suspended by cables from a 240-ft high gantry and swung into the impact surface at various attitudes and velocities. Instrumentation for these tests include on-board high-speed cameras, strain gages, load cells, displacement transducers, and accelerometers. Transducers in the aircraft are hard-wired through a long umbilical cable to the data acquisition room. Up to 96 channels of data can be collected at a typical rate of 4000 samples per second. Data acquisition using an FM multiplexed analog system and a high-speed personal computer based digital system is described.

A Comparative Analysis of Two Full-Scale MD-500 Helicopter Crash Tests

NASA Technical Reports Server (NTRS)

Littell, Justin D.

2011-01-01

Two full scale crash tests were conducted on a small MD-500 helicopter at NASA Langley Research Center fs Landing and Impact Research Facility. One of the objectives of this test series was to compare airframe impact response and occupant injury data between a test which outfitted the airframe with an external composite passive energy absorbing honeycomb and a test which had no energy absorbing features. In both tests, the nominal impact velocity conditions were 7.92 m/sec (26 ft/sec) vertical and 12.2 m/sec (40 ft/sec) horizontal, and the test article weighed approximately 1315 kg (2900 lbs). Airframe instrumentation included accelerometers and strain gages. Four Anthropomorphic Test Devices were also onboard; three of which were standard Hybrid II and III, while the fourth was a specialized torso. The test which contained the energy absorbing honeycomb showed vertical impact acceleration loads of approximately 15 g, low risk for occupant injury probability, and minimal airframe damage. These results were contrasted with the test conducted without the energy absorbing honeycomb. The test results showed airframe accelerations of approximately 40 g in the vertical direction, high risk for injury probability in the occupants, and substantial airframe damage.

Crashworthiness of light aircraft fuselage structures: A numerical and experimental investigation

NASA Technical Reports Server (NTRS)

Nanyaro, A. P.; Tennyson, R. C.; Hansen, J. S.

1984-01-01

The dynamic behavior of aircraft fuselage structures subject to various impact conditions was investigated. An analytical model was developed based on a self-consistent finite element (CFE) formulation utilizing shell, curved beam, and stringer type elements. Equations of motion were formulated and linearized (i.e., for small displacements), although material nonlinearity was retained to treat local plastic deformation. The equations were solved using the implicit Newmark-Beta method with a frontal solver routine. Stiffened aluminum fuselage models were also tested in free flight using the UTIAS pendulum crash test facility. Data were obtained on dynamic strains, g-loads, and transient deformations (using high speed photography in the latter case) during the impact process. Correlations between tests and predicted results are presented, together with computer graphics, based on the CFE model. These results include level and oblique angle impacts as well as the free-flight crash test. Comparisons with a hybrid, lumped mass finite element computer model demonstrate that the CFE formulation provides the test overall agreement with impact test data for comparable computing costs.

49 CFR 572.190 - Incorporated materials.

Code of Federal Regulations, 2012 CFR

2012-10-01

... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) ANTHROPOMORPHIC TEST DEVICES IIsD Side Impact Crash Test... procedures manual entitled, “Procedures for Assembly, Disassembly, and Inspection (PADI) of the SID-IIsD Side...

Emergency Locator Transmitter Crash Testing

NASA Image and Video Library

2015-07-29

Drop-testing a series of three Cessna 172 aircraft, NASA simulated severe but survivable plane accidents on July 2, July 29 and August 26, 2015, to test emergency locator transmitters (ELTs). A research team equipped the vintage airplanes with five ELTs, two crash test dummies, cameras and data-collecting sensors. ELTs are installed on general aviation and commercial planes to transmit a location signal in the event of a crash. Current ELT models send that signal to orbiting satellites, which repeat it to the nearest search and rescue ground station. The signal is used to determine and transmit the ELT's identity and location to rescuers. ELTs have to work in the extreme circumstances involved in an airplane crash. Included in those extreme circumstances are the possibilities of excessive vibration, fire and impact damage. NASA research is designed to find practical ways to improve ELT system performance and robustness, giving rescue workers the best chance of saving lives. The research was funded by the Search and Rescue Mission Office at NASA's Goddard Space Flight Center in Greenbelt, Maryland. The testing took place at NASA’s Langley Research Center in Hampton, Virginia. This is a video of the July 29, 2015, test.

49 CFR 572.197 - Abdomen.

Code of Federal Regulations, 2012 CFR

2012-10-01

..., DEPARTMENT OF TRANSPORTATION (CONTINUED) ANTHROPOMORPHIC TEST DEVICES IIsD Side Impact Crash Test Dummy... impacted side removed. The dummy is equipped with a lower spine laterally oriented accelerometer as... side of the seated dummy tangent to a vertical plane located within 10 mm of the side edge of the bench...

49 CFR 572.197 - Abdomen.

Code of Federal Regulations, 2011 CFR

2011-10-01

..., DEPARTMENT OF TRANSPORTATION (CONTINUED) ANTHROPOMORPHIC TEST DEVICES IIsD Side Impact Crash Test Dummy... impacted side removed. The dummy is equipped with a lower spine laterally oriented accelerometer as... side of the seated dummy tangent to a vertical plane located within 10 mm of the side edge of the bench...

Controlled Impact Demonstration instrumented test dummies installed in plane

NASA Technical Reports Server (NTRS)

1984-01-01

In this photograph are seen some of dummies in the passenger cabin of the B-720 aircraft. NASA Langley Research Center instrumented a large portion of the aircraft and the dummies for loads in a crashworthiness research program. In 1984 NASA Dryden Flight Research Facility and the Federal Aviation Adimistration (FAA) teamed-up in a unique flight experiment called the Controlled Impact Demonstration (CID). The test involved crashing a Boeing 720 aircraft with four JT3C-7 engines burning a mixture of standard fuel with an additive called Anti-misting Kerosene (AMK) designed to supress fire. In a typical aircraft crash, fuel spilled from ruptured fuel tanks forms a fine mist that can be ignited by a number of sources at the crash site. In 1984 the NASA Dryden Flight Research Facility (after 1994 a full-fledged Center again) and the Federal Aviation Administration (FAA) teamed-up in a unique flight experiment called the Controlled Impact Demonstration (CID), to test crash a Boeing 720 aircraft using standard fuel with an additive designed to supress fire. The additive, FM-9, a high-molecular-weight long-chain polymer, when blended with Jet-A fuel had demonstrated the capability to inhibit ignition and flame propagation of the released fuel in simulated crash tests. This anti-misting kerosene (AMK) cannot be introduced directly into a gas turbine engine due to several possible problems such as clogging of filters. The AMK must be restored to almost Jet-A before being introduced into the engine for burning. This restoration is called 'degradation' and was accomplished on the B-720 using a device called a 'degrader.' Each of the four Pratt & Whitney JT3C-7 engines had a 'degrader' built and installed by General Electric (GE) to break down and return the AMK to near Jet-A quality. In addition to the AMK research the NASA Langley Research Center was involved in a structural loads measurement experiment, which included having instrumented dummies filling the seats in the passenger compartment. Before the final flight on December 1, 1984, more than four years of effort passed trying to set-up final impact conditions considered survivable by the FAA. During those years while 14 flights with crews were flown the following major efforts were underway: NASA Dryden developed the remote piloting techniques necessary for the B-720 to fly as a drone aircraft; General Electric installed and tested four degraders (one on each engine); and the FAA refined AMK (blending, testing, and fueling a full-size aircraft). The 15 flights had 15 takeoffs, 14 landings and a larger number of approaches to about 150 feet above the prepared crash site under remote control. These flight were used to introduce AMK one step at a time into some of the fuel tanks and engines while monitoring the performance of the engines. On the final flight (No. 15) with no crew, all fuel tanks were filled with a total of 76,000 pounds of AMK and the remotely-piloted aircraft landed on Rogers Dry Lakebed in an area prepared with posts to test the effectiveness of the AMK in a controlled impact. The CID, which some wags called the Crash in the Desert, was spectacular with a large fireball enveloping and burning the B-720 aircraft. From the standpoint of AMK the test was a major set-back, but for NASA Langley, the data collected on crashworthiness was deemed successful and just as important.

Predicting motorcycle crash injury severity using weather data and alternative Bayesian multivariate crash frequency models.

PubMed

Cheng, Wen; Gill, Gurdiljot Singh; Sakrani, Taha; Dasu, Mohan; Zhou, Jiao

2017-11-01

Motorcycle crashes constitute a very high proportion of the overall motor vehicle fatalities in the United States, and many studies have examined the influential factors under various conditions. However, research on the impact of weather conditions on the motorcycle crash severity is not well documented. In this study, we examined the impact of weather conditions on motorcycle crash injuries at four different severity levels using San Francisco motorcycle crash injury data. Five models were developed using Full Bayesian formulation accounting for different correlations commonly seen in crash data and then compared for fitness and performance. Results indicate that the models with serial and severity variations of parameters had superior fit, and the capability of accurate crash prediction. The inferences from the parameter estimates from the five models were: an increase in the air temperature reduced the possibility of a fatal crash but had a reverse impact on crashes of other severity levels; humidity in air was not observed to have a predictable or strong impact on crashes; the occurrence of rainfall decreased the possibility of crashes for all severity levels. Transportation agencies might benefit from the research results to improve road safety by providing motorcyclists with information regarding the risk of certain crash severity levels for special weather conditions. Copyright © 2017 Elsevier Ltd. All rights reserved.

Evaluation of wheelchair seating system crashworthiness: "drop hook"-type seat attachment hardware.

PubMed

Bertocci, G; Ha, D; Deemer, E; Karg, P

2001-04-01

To evaluate the crashworthiness of commercially available hardware that attaches seat surfaces to the wheelchair frame. A low cost static crashworthiness test procedure that simulates a frontal impact motor vehicle crash. Safety testing laboratory. Eleven unique sets of drop-hook hardware made of carbon steel (4), stainless steel (4), and aluminum (3). Replicated seat-loading conditions associated with a 20g/48 kph frontal impact. Test criterion for seat loading was 16,680 N (3750 lb). Failure load and deflection of seat surface. None of the hardware sets tested met the crashworthiness test criterion. All failed at less than 50% of the load that seating hardware could be exposed to in a 20g/48 kph frontal impact. The primary failure mode was excessive deformation, leading to an unstable seat support surface. Results suggest that commercially available seating drop hooks may be unable to withstand loading associated with a frontal crash and may not be the best option for use with transport wheelchairs.

49 CFR 572.197 - Abdomen.

Code of Federal Regulations, 2013 CFR

2013-10-01

..., DEPARTMENT OF TRANSPORTATION (CONTINUED) ANTHROPOMORPHIC TEST DEVICES SID-IIsD Side Impact Crash Test Dummy... impacted side removed. The dummy is equipped with a lower spine laterally oriented accelerometer as... side of the seated dummy tangent to a vertical plane located within 10 mm of the side edge of the bench...

Experimental investigation of the crashworthiness of scaled composite sailplane fuselages

NASA Technical Reports Server (NTRS)

Kampf, Karl-Peter; Crawley, Edward F.; Hansman, R. John, Jr.

1989-01-01

The crash dynamics and energy absorption of composite sailplane fuselage segments undergoing nose-down impact were investigated. More than 10 quarter-scale structurally similar test articles, typical of high-performance sailplane designs, were tested. Fuselages segments were fabricated of combinations of fiberglass, graphite, Kevlar, and Spectra fabric materials. Quasistatic and dynamic tests were conducted. The quasistatic tests were found to replicate the strain history and failure modes observed in the dynamic tests. Failure modes of the quarter-scale model were qualitatively compared with full-scale crash evidence and quantitatively compared with current design criteria. By combining material and structural improvements, substantial increases in crashworthiness were demonstrated.

Development of a continuous motorcycle protection barrier system using computer simulation and full-scale crash testing.

PubMed

Atahan, Ali O; Hiekmann, J Marten; Himpe, Jeffrey; Marra, Joseph

2018-07-01

Road restraint systems are designed to minimize the undesirable effects of roadside accidents and improve safety of road users. These systems are utilized at either side or median section of roads to contain and redirect errant vehicles. Although restraint systems are mainly designed against car, truck and bus impacts there is an increasing pressure by the motorcycle industry to incorporate motorcycle protection systems into these systems. In this paper development details of a new and versatile motorcycle barrier, CMPS, coupled with an existing vehicle barrier is presented. CMPS is intended to safely contain and redirect motorcyclists during a collision event. First, crash performance of CMPS design is evaluated by means of a three dimensional computer simulation program LS-DYNA. Then full-scale crash tests are used to verify the acceptability of CMPS design. Crash tests were performed at CSI proving ground facility using a motorcycle dummy in accordance with prEN 1317-8 specification. Full-scale crash test results show that CMPS is able to successfully contain and redirect dummy with minimal injury risk on the dummy. Damage on the barrier is also minimal proving the robustness of the CMPS design. Based on the test findings and further review by the authorities the implementation of CMPS was recommended at highway system. Copyright © 2017 Elsevier Ltd. All rights reserved.

Anthropometry for WorldSID, a World-Harmonized Midsize Male Side Impact Crash Dummy

DOE Office of Scientific and Technical Information (OSTI.GOV)

S. Moss; Z. Wang; M. Salloum

2000-06-19

The WorldSID project is a global effort to design a new generation side impact crash test dummy under the direction of the International Organization for Standardization (ISO). The first WorldSID crash dummy will represent a world-harmonized mid-size adult male. This paper discusses the research and rationale undertaken to define the anthropometry of a world standard midsize male in the typical automotive seated posture. Various anthropometry databases are compared region by region and in terms of the key dimensions needed for crash dummy design. The Anthropometry for Motor Vehicle Occupants (AMVO) dataset, as established by the University of Michigan Transportation Researchmore » Institute (UMTRI), is selected as the basis for the WorldSID mid-size male, updated to include revisions to the pelvis bone location. The proposed mass of the dummy is 77.3kg with full arms. The rationale for the selected mass is discussed. The joint location and surface landmark database is appended to this paper.« less

Comparison of Expected Crash and Injury Reduction from Production Forward Collision and Lane Departure Warning Systems.

PubMed

Kusano, Kristofer D; Gabler, Hampton C

2015-01-01

The U.S. New Car Assessment Program (NCAP) now tests for forward collision warning (FCW) and lane departure warning (LDW). The design of these warnings differs greatly between vehicles and can result in different real-world field performance in preventing or mitigating the effects of collisions. The objective of this study was to compare the expected number of crashes and injured drivers that could be prevented if all vehicles in the fleet were equipped with the FCW and LDW systems tested under the U.S. NCAP. To predict the potential crashes and serious injury that could be prevented, our approach was to computationally model the U.S. crash population. The models simulated all rear-end and single-vehicle road departure collisions that occurred in a nationally representative crash database (NASS-CDS). A sample of 478 single-vehicle crashes from NASS-CDS 2012 was the basis for 24,822 simulations for LDW. A sample of 1,042 rear-end collisions from NASS-CDS years 1997-2013 was the basis for 7,616 simulations for FCW. For each crash, 2 simulations were performed: (1) without the system present and (2) with the system present. Models of each production safety system were based on 54 model year 2010-2014 vehicles that were evaluated under the NCAP confirmation procedure for LDW and/or FCW. NCAP performed 40 LDW and 45 FCW tests of these vehicles. The design of the FCW systems had a dramatic impact on their potential to prevent crashes and injuries. Between 0 and 67% of crashes and 2 and 69% of moderately to fatally injured drivers in rear-end impacts could have been prevented if all vehicles were equipped with the FCW systems. Earlier warning times resulted in increased benefits. The largest effect on benefits, however, was the lower operating speed threshold of the systems. Systems that only operated at speeds above 20 mph were less than half as effective as those that operated above 5 mph with similar warning times. The production LDW systems could have prevented between 11 and 23% of drift-out-of-lane crashes and 13 and 22% of seriously to fatally injured drivers. A majority of the tested LDW systems delivered warnings near the point when the vehicle first touched the lane line, leading to similar benefits. Minimum operating speed also greatly affected LDW effectiveness. The results of this study show that the expected field performance of FCW and LDW systems are highly dependent on the design and system limitations. Systems that delivered warnings earlier and operated at lower speeds may prevent far more crashes and injuries than systems that warn late and operate only at high speeds. These results suggest that future FCW and LDW evaluation should prioritize early warnings and full-speed range operation. A limitation of this study is that additional crash avoidance features that may also mitigate collisions-for example, brake assist, automated braking, or lane-keeping assistance-were not evaluated during the NCAP tests or in our benefits models. The potential additional mitigating effects of these systems were not quantified in this study.

Optimization of vehicle deceleration to reduce occupant injury risks in frontal impact.

PubMed

Mizuno, Koji; Itakura, Takuya; Hirabayashi, Satoko; Tanaka, Eiichi; Ito, Daisuke

2014-01-01

In vehicle frontal impacts, vehicle acceleration has a large effect on occupant loadings and injury risks. In this research, an optimal vehicle crash pulse was determined systematically to reduce injury measures of rear seat occupants by using mathematical simulations. The vehicle crash pulse was optimized based on a vehicle deceleration-deformation diagram under the conditions that the initial velocity and the maximum vehicle deformation were constant. Initially, a spring-mass model was used to understand the fundamental parameters for optimization. In order to investigate the optimization under a more realistic situation, the vehicle crash pulse was also optimized using a multibody model of a Hybrid III dummy seated in the rear seat for the objective functions of chest acceleration and chest deflection. A sled test using a Hybrid III dummy was carried out to confirm the simulation results. Finally, the optimal crash pulses determined from the multibody simulation were applied to a human finite element (FE) model. The optimized crash pulse to minimize the occupant deceleration had a concave shape: a high deceleration in the initial phase, low in the middle phase, and high again in the final phase. This crash pulse shape depended on the occupant restraint stiffness. The optimized crash pulse determined from the multibody simulation was comparable to that from the spring-mass model. From the sled test, it was demonstrated that the optimized crash pulse was effective for the reduction of chest acceleration. The crash pulse was also optimized for the objective function of chest deflection. The optimized crash pulse in the final phase was lower than that obtained for the minimization of chest acceleration. In the FE analysis of the human FE model, the optimized pulse for the objective function of the Hybrid III chest deflection was effective in reducing rib fracture risks. The optimized crash pulse has a concave shape and is dependent on the occupant restraint stiffness and maximum vehicle deformation. The shapes of the optimized crash pulse in the final phase were different for the objective functions of chest acceleration and chest deflection due to the inertial forces of the head and upper extremities. From the human FE model analysis it was found that the optimized crash pulse for the Hybrid III chest deflection can substantially reduce the risk of rib cage fractures. Supplemental materials are available for this article. Go to the publisher's online edition of Traffic Injury Prevention to view the supplemental file.

Modal analysis of the human neck in vivo as a criterion for crash test dummy evaluation

NASA Astrophysics Data System (ADS)

Willinger, R.; Bourdet, N.; Fischer, R.; Le Gall, F.

2005-10-01

Low speed rear impact remains an acute automative safety problem because of a lack of knowledge of the mechanical behaviour of the human neck early after impact. Poorly validated mathematical models of the human neck or crash test dummy necks make it difficult to optimize automotive seats and head rests. In this study we have constructed an experimental and theoretical modal analysis of the human head-neck system in the sagittal plane. The method has allowed us to identify the mechanical properties of the neck and to validate a mathematical model in the frequency domain. The extracted modal characteristics consist of a first natural frequency at 1.3±0.1 Hz associated with head flexion-extension motion and a second mode at 8±0.7 Hz associated with antero-posterior translation of the head, also called retraction motion. Based on this new validation parameters we have been able to compare the human and crash test dummy frequency response functions and to evaluate their biofidelity. Three head-neck systems of current test dummies dedicated for use in rear-end car crash accident investigations have been evaluated in the frequency domain. We did not consider any to be acceptable, either because of excessive rigidity of their flexion-extension mode or because they poorly reproduce the head translation mode. In addition to dummy evaluation, this study provides new insight into injury mechanisms when a given natural frequency can be linked to a specific neck deformation.

CID Aircraft slap-down

NASA Technical Reports Server (NTRS)

1984-01-01

In this photograph the B-720 is seen during the moments of initial impact. The left wing is digging into the lakebed while the aircraft continues sliding towards wing openers. In 1984 NASA Dryden Flight Research Facility and the Federal Aviation Administration (FAA) teamed-up in a unique flight experiment called the Controlled Impact Demonstration (CID). The test involved crashing a Boeing 720 aircraft with four JT3C-7 engines burning a mixture of standard fuel with an additive, Anti-misting Kerosene (AMK), designed to supress fire. In a typical aircraft crash, fuel spilled from ruptured fuel tanks forms a fine mist that can be ignited by a number of sources at the crash site. In 1984 the NASA Dryden Flight Research Facility (after 1994 a full-fledged Center again) and the Federal Aviation Administration (FAA) teamed-up in a unique flight experiment called the Controlled Impact Demonstration (CID), to test crash a Boeing 720 aircraft using standard fuel with an additive designed to supress fire. The additive, FM-9, a high-molecular-weight long-chain polymer, when blended with Jet-A fuel had demonstrated the capability to inhibit ignition and flame propagation of the released fuel in simulated crash tests. This anti-misting kerosene (AMK) cannot be introduced directly into a gas turbine engine due to several possible problems such as clogging of filters. The AMK must be restored to almost Jet-A before being introduced into the engine for burning. This restoration is called 'degradation' and was accomplished on the B-720 using a device called a 'degrader.' Each of the four Pratt & Whitney JT3C-7 engines had a 'degrader' built and installed by General Electric (GE) to break down and return the AMK to near Jet-A quality. In addition to the AMK research the NASA Langley Research Center was involved in a structural loads measurement experiment, which included having instrumented dummies filling the seats in the passenger compartment. Before the final flight on December 1, 1984, more than four years of effort passed trying to set-up final impact conditions considered survivable by the FAA. During those years while 14 flights with crews were flown the following major efforts were underway: NASA Dryden developed the remote piloting techniques necessary for the B-720 to fly as a drone aircraft; General Electric installed and tested four degraders (one on each engine); and the FAA refined AMK (blending, testing, and fueling a full-size aircraft). The 15 flights had 15 takeoffs, 14 landings and a larger number of approaches to about 150 feet above the prepared crash site under remote control. These flight were used to introduce AMK one step at a time into some of the fuel tanks and engines while monitoring the performance of the engines. On the final flight (No. 15) with no crew, all fuel tanks were filled with a total of 76,000 pounds of AMK and the remotely-piloted aircraft landed on Rogers Dry Lakebed in an area prepared with posts to test the effectiveness of the AMK in a controlled impact. The CID, which some wags called the Crash in the Desert, was spectacular with a large fireball enveloping and burning the B-720 aircraft. From the standpoint of AMK the test was a major set-back, but for NASA Langley, the data collected on crashworthiness was deemed successful and just as important.

Full-Scale Transport controlled Impact Demonstration

NASA Technical Reports Server (NTRS)

Hayduk, R. J. (Compiler)

1986-01-01

The controlled impact demonstration (CID) test of a transport aircraft took place on December 1, 1984, crashing at a prepared site on Rogers Dry Lakebed, Edwards Air Force Base, California. The demonstration was a setback for the antimisting kerosene (AMK) researchers. The impact conditions, considerably different from the planned scenario, exposed large quantities of degraded AMK and hydraulic fluid and caused unexpectedly hot ignition sources, bulk loss of fuel from the right wing, airflow patterns over the wings and fuselage that were untested on AMK, and fuel intrusion into the lower fuselage. The test was much more severe than planned and is generally considered to be unrepresentative of the type of survivable crash that would benefit from AMK. Ninety-seven percent of the sensors on the fuselage and wing structure, seats, dummies, restraint systems, galley, and bins were active at impact. A wealth of sensor data was collected from this once-in-a-lifetime research test. The flight data recorder experiments on board were also generally successful.

CID Aircraft pre-impact lakebed skid

NASA Technical Reports Server (NTRS)

1984-01-01

The B-720 is seen viewed moments after impact and just before hitting the wing openers. In a typical aircraft crash, fuel spilled from ruptured fuel tanks forms a fine mist that can be ignited by a number of sources at the crash site. In 1984 the NASA Dryden Flight Research Facility (after 1994 a full-fledged Center again) and the Federal Aviation Administration (FAA) teamed-up in a unique flight experiment called the Controlled Impact Demonstration (CID), to test crash a Boeing 720 aircraft using standard fuel with an additive designed to supress fire. The additive, FM-9, a high-molecular-weight long-chain polymer, when blended with Jet-A fuel had demonstrated the capability to inhibit ignition and flame propagation of the released fuel in simulated crash tests. This anti-misting kerosene (AMK) cannot be introduced directly into a gas turbine engine due to several possible problems such as clogging of filters. The AMK must be restored to almost Jet-A before being introduced into the engine for burning. This restoration is called 'degradation' and was accomplished on the B-720 using a device called a 'degrader.' Each of the four Pratt & Whitney JT3C-7 engines had a 'degrader' built and installed by General Electric (GE) to break down and return the AMK to near Jet-A quality. In addition to the AMK research the NASA Langley Research Center was involved in a structural loads measurement experiment, which included having instrumented dummies filling the seats in the passenger compartment. Before the final flight on December 1, 1984, more than four years of effort passed trying to set-up final impact conditions considered survivable by the FAA. During those years while 14 flights with crews were flown the following major efforts were underway: NASA Dryden developed the remote piloting techniques necessary for the B-720 to fly as a drone aircraft; General Electric installed and tested four degraders (one on each engine); and the FAA refined AMK (blending, testing, and fueling a full-size aircraft). The 15 flights had 15 takeoffs, 14 landings and a larger number of approaches to about 150 feet above the prepared crash site under remote control. These flight were used to introduce AMK one step at a time into some of the fuel tanks and engines while monitoring the performance of the engines. On the final flight (No. 15) with no crew, all fuel tanks were filled with a total of 76,000 pounds of AMK and the remotely-piloted aircraft landed on Rogers Dry Lakebed in an area prepared with posts to test the effectiveness of the AMK in a controlled impact. The CID, which some wags called the Crash in the Desert, was spectacular with a large fireball enveloping and burning the B-720 aircraft. From the standpoint of AMK the test was a major set-back, but for NASA Langley, the data collected on crashworthiness was deemed successful and just as important.

Performance of two load-limiting subfloor concepts in full-scale general aviation airplane crash tests

NASA Technical Reports Server (NTRS)

Carden, H. D.

1984-01-01

Three six-place, low wing, twin-engine general aviation airplane test specimens were crash tested at the langley Impact Dynamics research Facility under controlled free-flight conditions. One structurally unmodified airplane was the baseline airplane specimen for the test series. The other airplanes were structurally modified to incorporate load-limiting (energy-absorbing) subfloor concepts into the structure for full scale crash test evaluation and comparison to the unmodified airplane test results. Typically, the lowest floor accelerations and anthropomorphic dummy occupant responses, and the least seat crushing of standard and load-limiting seats, occurred in the modified load-limiting subfloor airplanes wherein the greatest structural crushing of the subfloor took place. The better performing of the two load-limiting subfloor concepts reduced the peak airplane floor accelerations at the pilot and four seat/occupant locations to -25 to -30 g's as compared to approximately -50 to -55 g's acceleration magnitude for the unmodified airplane structure.

Crashworthiness requirements for commuter rail passenger seats

DOT National Transportation Integrated Search

2005-11-05

Occupant experiments using instrumented crash test dummies seated in commuter rail seats have been conducted on board full-scale impact tests of rail cars. The tests have been conducted using both conventional cars and cars modified to incorporate cr...

Large Field Photogrammetry Techniques in Aircraft and Spacecraft Impact Testing

NASA Technical Reports Server (NTRS)

Littell, Justin D.

2010-01-01

The Landing and Impact Research Facility (LandIR) at NASA Langley Research Center is a 240 ft. high A-frame structure which is used for full-scale crash testing of aircraft and rotorcraft vehicles. Because the LandIR provides a unique capability to introduce impact velocities in the forward and vertical directions, it is also serving as the facility for landing tests on full-scale and sub-scale Orion spacecraft mass simulators. Recently, a three-dimensional photogrammetry system was acquired to assist with the gathering of vehicle flight data before, throughout and after the impact. This data provides the basis for the post-test analysis and data reduction. Experimental setups for pendulum swing tests on vehicles having both forward and vertical velocities can extend to 50 x 50 x 50 foot cubes, while weather, vehicle geometry, and other constraints make each experimental setup unique to each test. This paper will discuss the specific calibration techniques for large fields of views, camera and lens selection, data processing, as well as best practice techniques learned from using the large field of view photogrammetry on a multitude of crash and landing test scenarios unique to the LandIR.

Emergency Locator Transmitter System Performance During Three Full-Scale General Aviation Crash Tests

NASA Technical Reports Server (NTRS)

Littell, Justin D.; Stimson, Chad M.

2016-01-01

Full-scale crash tests were conducted on three Cessna 172 aircraft at NASA Langley Research Center's Landing and Impact Research facility during the summer of 2015. The purpose of the three tests was to evaluate the performance of commercially available Emergency Locator Transmitter (ELT) systems and support development of enhanced installation guidance. ELTs are used to provide location information to Search and Rescue (SAR) organizations in the event of an aviation distress situation, such as a crash. The crash tests simulated three differing severe but survivable crash conditions, in which it is expected that the onboard occupants have a reasonable chance of surviving the accident and would require assistance from SAR personnel. The first simulated an emergency landing onto a rigid surface, while the second and third simulated controlled flight into terrain. Multiple ELT systems were installed on each airplane according to federal regulations. The majority of the ELT systems performed nominally. In the systems which did not activate, post-test disassembly and inspection offered guidance for non-activation cause in some cases, while in others, no specific cause could be found. In a subset of installations purposely disregarding best practice guidelines, failure of the ELT-to-antenna cabling connections were found. Recommendations for enhanced installation guidance of ELT systems will be made to the Radio Technical Commission for Aeronautics (RTCA) Special Committee 229 for consideration for adoption in a future release of ELT minimum operational performance specifications. These recommendations will be based on the data gathered during this test series as well as a larger series of crash simulations using computer models that will be calibrated based on these data

Crash Testing of Helicopter Airframe Fittings

NASA Technical Reports Server (NTRS)

Clarke, Charles W.; Townsend, William; Boitnott, Richard

2004-01-01

As part of the Rotary Wing Structures Technology Demonstration (RWSTD) program, a surrogate RAH-66 seat attachment fitting was dynamically tested to assess its response to transient, crash impact loads. The dynamic response of this composite material fitting was compared to the performance of an identical fitting subjected to quasi-static loads of similar magnitude. Static and dynamic tests were conducted of both smaller bench level and larger full-scale test articles. At the bench level, the seat fitting was supported in a steel fixture, and in the full-scale tests, the fitting was integrated into a surrogate RAH-66 forward fuselage. Based upon the lessons learned, an improved method to design, analyze, and test similar composite material fittings is proposed.

Effects of administrative license revocation on employment.

PubMed

Knoebel, K Y; Ross, H L

1997-09-01

This study addresses the impact of administrative license revocation (ALR) on the employment and income of first and multiple drunk-driving (DUI) offenders. It also inquires into the impact of alcohol-related crashes on the employment of other persons involved in such crashes (i.e. innocent drivers, passengers and pedestrians). Questionnaires were completed by 579 first-time offenders and 233 multiple offenders at alcohol education schools and treatment programs in four counties in four states, which represented varying ALR laws: Chester County, PA (without ALR); Anne Arundel County, MD (ALR with immediate hardship license available); Marin County, CA (30-day hard license suspension); and New Castle County, DE (90-day hard license suspension). Completed crash 'victim' surveys were returned by 146 crash victims from Pennsylvania, California and Delaware. The study found that ALR does not have a major impact on the DUI offender's job and income. Alcohol-involved crashes can have a great impact on seriously injured victims, but the proportion of DUI crashes producing serious injury is quite low. Most DUI is crash-free, and most crashes do not involve injury. The vast bulk of the impact of DUI events falls on the offenders rather than innocent victims.

Association Between NCAP Ratings and Real-World Rear Seat Occupant Risk of Injury.

PubMed

Metzger, Kristina B; Gruschow, Siobhan; Durbin, Dennis R; Curry, Allison E

2015-01-01

Several studies have evaluated the correlation between U.S. or Euro New Car Assessment Program (NCAP) ratings and injury risk to front seat occupants, in particular driver injuries. Conversely, little is known about whether NCAP 5-star ratings predict real-world risk of injury to restrained rear seat occupants. The NHTSA has identified rear seat occupant protection as a specific area under consideration for improvements to its NCAP. In order to inform NHTSA's efforts, we examined how NCAP's current 5-star rating system predicts risk of moderate or greater injury among restrained rear seat occupants in real-world crashes. We identified crash-involved vehicles, model year 2004-2013, in NASS-CDS (2003-2012) with known make and model and nonmissing occupant information. We manually matched these vehicles to their NCAP star ratings using data on make, model, model year, body type, and other identifying information. The resultant linked NASS-CDS and NCAP database was analyzed to examine associations between vehicle ratings and rear seat occupant injury risk; risk to front seat occupants was also estimated for comparison. Data were limited to restrained occupants and occupant injuries were defined as any injury with a maximum Abbreviated Injury Scale (AIS) score of 2 or greater. We linked 95% of vehicles in NASS-CDS to a specific vehicle in NCAP. The 18,218 vehicles represented an estimated 6 million vehicles with over 9 million occupants. Rear seat passengers accounted for 12.4% of restrained occupants. The risk of injury in all crashes for restrained rear seat occupants was lower in vehicles with a 5-star driver rating in frontal impact tests (1.4%) than with 4 or fewer stars (2.6%, P =.015); results were similar for the frontal impact passenger rating (1.3% vs. 2.4%, P =.024). Conversely, side impact driver and passenger crash tests were not associated with rear seat occupant injury risk (driver test: 1.7% for 5-star vs. 1.8% for 1-4 stars; passenger test: 1.6% for 5 stars vs 1.8% for 1-4 stars). Current frontal impact test procedures provide some degree of discrimination in real-world rear seat injury risk among vehicles with 5 compared to fewer than 5 stars. However, there is no evidence that vehicles with a 5-star side impact passenger rating, which is the only crash test procedure to include an anthropomorphic test dummy (ATD) in the rear, demonstrate lower risks of injury in the rear than vehicles with fewer than 5 stars. These results support prioritizing modifications to the NCAP program that specifically evaluate rear seat injury risk to restrained occupants of all ages.

Energy attenuation performance of impact protection worn by motorcyclists in real-world crashes.

PubMed

Albanese, Bianca; Gibson, Tom; Whyte, Tom; Meredith, Lauren; Savino, Giovanni; de Rome, Liz; Baldock, Matthew; Fitzharris, Michael; Brown, Julie

2017-05-29

Laboratory studies have demonstrated that impact protectors (IP) used in motorcycle clothing can reduce fracture severities. While crash studies have reported IP are associated with reduced likelihood of soft tissue injury, there is little evidence of their effectiveness in reducing fracture likelihood. This discrepancy might be related to IP quality. There are mandatory requirements for IP supplied with protective clothing in Europe, but not elsewhere. This study examines the energy attenuation performance of IP used by Australian riders. IP were harvested from clothing worn by crashed riders admitted to hospital. The IP were examined and energy attenuation properties were determined using EN 1621-1 test procedures. Impact injury was identified from medical records and defined as fractures, dislocations, and avulsions that occurred following impact to the rider's shoulders, elbows, hips, and/or knees. Fisher's exact test was used to examine the relationship between meeting the EN 1621-1 energy attenuation requirements and impact injury. The association between the average and maximum transmitted force, and impact injury was examined using generalized estimating equations. Motorcycle riders were recruited as part of an in-depth crash study through three hospitals in New South Wales, Australia, between 2012 and 2014. Riders were interviewed, and engineers conducted site, vehicle, and clothing inspections. Clothing was collected, or identical garments were purchased. Clothing was inspected for 62 riders. Of these, 19 wore clothing incorporating 76 IP. Twenty-six of these were impacted in the crash event. Almost all impacted IP (96%) were CE marked, and most (83%) met Level 1 energy attenuation requirements of EN 1621-1 when tested. Of the 26 impacted IP, four were associated with impact injuries, including midshaft and distal clavicle fractures and a scapula and olecranon fracture. No associations between meeting EN 1621-1 requirements and impact injury were found (p = 0.5). There was no association between average force transmitted and impact injury (95% CI: 0.91-1.24); however, as maximum force transmitted increased, the odds of impact injury increased (95% CI: 1.01-1.2). These results indicate a high probability of impact injury at 50 kN, the limit of maximum transmitted force specified in EN 1621-1. The allowable transmitted force of EN 1621-1 may be too high to effectively reduce the probability of impact injury. This is not surprising, given human tolerance levels that are reported in literature. Reducing the force limit below the reported fracture tolerance limits might be difficult with current technology. However, there is scope to reduce the EN 1621-1 maximum limit of 50 kN transmitted force. A reduction in the maximum force limit would improve rider protection and appears feasible, as 77% of tested IP recorded a maximum force <35 kN. This level of transmitted force is estimated to be associated with <20% probability of impact injury. While the performance of IP available to Australian riders is not regulated, most IP was CE marked. The results indicate a significant association between maximum transmitted force, tested according to EN 1621-1 procedures, and impact injury. Further investigation of the EN 1621-1 requirements may be warranted. This work will interest those targeting protective equipment for motorcyclists as a mechanism for reducing injury to these vulnerable road users.

We can change the way people travel all across America : with one number

DOT National Transportation Integrated Search

1998-10-01

This report contains the test procedures, test setup, and test results from two crash tests performed at the Federal Outdoor Impact Laboratory (FOIL) located at the Turner-Fairbank Highway Research Center (TFHRC) in McLean, Virginia. The objective of...

[Automobile versus pedestrian accidents analysis by fixed-parameters computer simulation].

PubMed

Mao, Ming-Yuan; Chen, Yi-Jiu; Liu, Ning-Guo; Zou, Dong-Hua; Liu, Jun-Yong; Jin, Xian-Long

2008-04-01

Using computer simulation to analyze the effects of speed, type of automobile and impacted position on crash-course and injuries of pedestrians in automobile vs. pedestrian accidents. Automobiles (bus, minibus, car and truck) and pedestrian models were constructed with multi-body dynamics computing method. The crashes were simulated at different impact speeds (20, 30, 40, 50 and 60 km/h) and different positions (front, lateral and rear of pedestrians). Crash-courses and their biomechanical responses were studied. If the type of automobile and impact position were the same, the crash-courses were similar (impact speed < or = 60 km/h). There were some characteristics in the head acceleration, upper neck axial force and leg axial force. Multi-body dynamics computer simulation of crash can be applied to analyze crash-course and injuries (head, neck and leg) of pedestrians.

An Evaluation of the Euroncap Crash Test Safety Ratings in the Real World

PubMed Central

Segui-Gomez, Maria; Lopez-Valdes, Francisco J.; Frampton, Richard

2007-01-01

We investigated whether the rating obtained in the EuroNCAP test procedures correlates with injury protection to vehicle occupants in real crashes using data in the UK Cooperative Crash Injury Study (CCIS) database from 1996 to 2005. Multivariate Poisson regression models were developed, using the Abbreviated Injury Scale (AIS) score by body region as the dependent variable and the EuroNCAP score for that particular body region, seat belt use, mass ratio and Equivalent Test Speed (ETS) as independent variables. Our models identified statistically significant relationships between injury severity and safety belt use, mass ratio and ETS. We could not identify any statistically significant relationships between the EuroNCAP body region scores and real injury outcome except for the protection to pelvis-femur-knee in frontal impacts where scoring “green” is significantly better than scoring “yellow” or “red”.

Dynamic impact testing of hedgehog spines using a dual-arm crash pendulum.

PubMed

Swift, Nathan B; Hsiung, Bor-Kai; Kennedy, Emily B; Tan, Kwek-Tze

2016-08-01

Hedgehog spines are a potential model for impact resistant structures and material. While previous studies have examined static mechanical properties of individual spines, actual collision tests on spines analogous to those observed in the wild have not previously been investigated. In this study, samples of roughly 130 keratin spines were mounted vertically in thin substrates to mimic the natural spine layout on hedgehogs. A weighted crash pendulum was employed to induce and measure the effects of repeated collisions against samples, with the aim to evaluate the influence of various parameters including humidity effect, impact energy, and substrate hardness. Results reveal that softer samples-due to humidity conditioning and/or substrate material used-exhibit greater durability over multiple impacts, while the more rigid samples exhibit greater energy absorption performance at the expense of durability. This trend is exaggerated during high-energy collisions. Comparison of the results to baseline tests with industry standard impact absorbing foam, wherein the spines exhibit similar energy absorption, verifies the dynamic impact absorption capabilities of hedgehog spines and their candidacy as a structural model for engineered impact technology. Copyright © 2016 Elsevier Ltd. All rights reserved.

Evaluation of various padding materials for crash protection.

DOT National Transportation Integrated Search

1966-12-01

Thirty-seven different materials and combinations of materials were impacted with an instrumented dummy head at 15 ft/sec and at 30 ft/sec. Peak g forces, rise times, and deceleration durations were determined for both impact velocities on each test ...

An empirical Bayes safety evaluation of tram/streetcar signal and lane priority measures in Melbourne.

PubMed

Naznin, Farhana; Currie, Graham; Sarvi, Majid; Logan, David

2016-01-01

Streetcars/tram systems are growing worldwide, and many are given priority to increase speed and reliability performance in mixed traffic conditions. Research related to the road safety impact of tram priority is limited. This study explores the road safety impacts of tram priority measures including lane and intersection/signal priority measures. A before-after crash study was conducted using the empirical Bayes (EB) method to provide more accurate crash impact estimates by accounting for wider crash trends and regression to the mean effects. Before-after crash data for 29 intersections with tram signal priority and 23 arterials with tram lane priority in Melbourne, Australia, were analyzed to evaluate the road safety impact of tram priority. The EB before-after analysis results indicated a statistically significant adjusted crash reduction rate of 16.4% after implementation of tram priority measures. Signal priority measures were found to reduce crashes by 13.9% and lane priority by 19.4%. A disaggregate level simple before-after analysis indicated reductions in total and serious crashes as well as vehicle-, pedestrian-, and motorcycle-involved crashes. In addition, reductions in on-path crashes, pedestrian-involved crashes, and collisions among vehicles moving in the same and opposite directions and all other specific crash types were found after tram priority implementation. Results suggest that streetcar/tram priority measures result in safety benefits for all road users, including vehicles, pedestrians, and cyclists. Policy implications and areas for future research are discussed.

Evaluation of the effectiveness of toe board energy-absorbing material for foot, ankle, and lower leg injury reduction.

PubMed

Patalak, John P; Stitzel, Joel D

2018-02-17

Since 2000, numerous improvements have been made to the National Association for Stock Car Auto Racing, Incorporated (NASCAR®) driver restraint system, resulting in improved crash protection for motorsports drivers. Advancements have included seats, head and neck restraints (HNRs), seat belt restraint systems, driver helmets, and others. These enhancements have increased protection for drivers from severe crash loading. Extending protection to the driver's extremities remains challenging. Though the drivers' legs are well contained for lateral and vertical crashes, they remain largely unrestrained in frontal and frontal oblique crashes. Sled testing was conducted for the evaluation of an energy-absorbing (EA) toe board material to be used as a countermeasure for leg and foot injuries. Testing included baseline rigid toe boards, tests with EA material-covered toe boards, and pretest positioning of the 50th percentile male frontal Hybrid III anthropomorphic test device (ATD) lower extremities. ATD leg and foot instrumentation included foot acceleration and tibia forces and moments. The sled test data were evaluated using established injury criteria for tibial plateau fractures, leg shaft fractures, and calcaneus, talus, ankle, and midfoot fractures. A polyurethane EA foam was found to be effective in limiting axial tibia force and foot accelerations when subjected to frontal impacts using the NASCAR motorsport restraint system.

Numerical and Experimental Studies on Crash Characteristics of Closed Form Thin—Walled Steel Sections

NASA Astrophysics Data System (ADS)

Veerasamy, M.; Srinivasan, K.; Prakash, Raghu V.

2010-10-01

The crash behavior of Cold Rolled Mild Steel (CRMS) closed form thin section was studied by conducting compressive tests at loading velocities of 5 mm/min and 1000 mm/min. The numerical simulations were conducted for the same experimental conditions to understand the deformation shape, peak forces and energy absorption capacity of sections at different impact velocities. The simulation results correlated well with the experimental results.

Assessment of the safety benefits of vehicles' advanced driver assistance, connectivity and low level automation systems.

PubMed

Yue, Lishengsa; Abdel-Aty, Mohamed; Wu, Yina; Wang, Ling

2018-08-01

The Connected Vehicle (CV) technologies together with other Driving Assistance (DA) technologies are believed to have great effects on traffic operation and safety, and they are expected to impact the future of our cities. However, few research has estimated the exact safety benefits when all vehicles are equipped with these technologies. This paper seeks to fill the gap by using a general crash avoidance effectiveness framework for major CV&DA technologies to make a comprehensive crash reduction estimation. Twenty technologies that were tested in recent studies are summarized and sensitivity analysis is used for estimating their total crash avoidance effectiveness. The results show that crash avoidance effectiveness of CV&DA technology is significantly affected by the vehicle type and the safety estimation methodology. A 70% crash avoidance rate seems to be the highest effectiveness for the CV&DA technologies operating in the real-world environment. Based on the 2005-2008 U.S. GES Crash Records, this research found that the CV&DA technologies could lead to the reduction of light vehicles' crashes and heavy trucks' crashes by at least 32.99% and 40.88%, respectively. The rear-end crashes for both light vehicles and heavy trucks have the most expected crash benefits from the technologies. The paper also studies the effectiveness of Forward Collision Warning technology (FCW) under fog conditions, and the results show that FCW could reduce 35% of the near-crash events under fog conditions. Copyright © 2018 Elsevier Ltd. All rights reserved.

Documentation of deformation from passenger rail two-car impact test

DOT National Transportation Integrated Search

2003-11-01

The Volpe Center has been conducting research into rail equipment crashworthiness in support of the Federal Railroad Administrations (FRA) Office of Research and Development. As part of this research, full-scale crash tests of passenger cars have ...

Crash Simulation of a Vertical Drop Test of a B737 Fuselage Section with Overhead Bins and Luggage

NASA Technical Reports Server (NTRS)

Jackson, Karen E.; Fasanella, Edwin L.

2004-01-01

The focus of this paper is to describe a crash simulation of a 30-ft/s vertical drop test of a Boeing 737 (B737) fuselage section. The drop test of the 10-ft. long fuselage section of a B737 aircraft was conducted in November of 2000 at the FAA Technical Center in Atlantic City, NJ. The fuselage section was outfitted with two different commercial overhead stowage bins. In addition, 3,229-lbs. of luggage were packed in the cargo hold to represent a maximum take-off weight condition. The main objective of the test was to evaluate the response and failure modes of the overhead stowage bins in a narrow-body transport fuselage section when subjected to a severe, but survivable, impact. A secondary objective of the test was to generate experimental data for correlation with the crash simulation. A full-scale 3-dimensional finite element model of the fuselage section was developed and a crash simulation was conducted using the explicit, nonlinear transient dynamic code, MSC.Dytran. Pre-test predictions of the fuselage and overhead bin responses were generated for correlation with the drop test data. A description of the finite element model and an assessment of the analytical/experimental correlation are presented. In addition, suggestions for modifications to the model to improve correlation are proposed.

Crash pulse optimization for occupant protection at various impact velocities.

PubMed

Ito, Daisuke; Yokoi, Yusuke; Mizuno, Koji

2015-01-01

Vehicle deceleration has a large influence on occupant kinematic behavior and injury risks in crashes, and the optimization of the vehicle crash pulse that mitigates occupant loadings has been the subject of substantial research. These optimization research efforts focused on only high-velocity impact in regulatory or new car assessment programs though vehicle collisions occur over a wide range of velocities. In this study, the vehicle crash pulse was optimized for various velocities with a genetic algorithm. Vehicle deceleration was optimized in a full-frontal rigid barrier crash with a simple spring-mass model that represents the vehicle-occupant interaction and a Hybrid III 50th percentile male multibody model. To examine whether the vehicle crash pulse optimized at the high impact velocity is useful for reducing occupant loading at all impact velocities less than the optimized velocity, the occupant deceleration was calculated at various velocities for the optimized crash pulse determined at a high speed. The optimized vehicle deceleration-deformation characteristics that are effective for various velocities were investigated with 2 approaches. The optimized vehicle crash pulse at a single impact velocity consists of a high initial impulse followed by zero deceleration and then constant deceleration in the final stage. The vehicle deceleration optimized with the Hybrid III model was comparable to that determined from the spring-mass model. The optimized vehicle deceleration-deformation characteristics determined at a high speed did not necessarily lead to an occupant deceleration reduction at a lower velocity. The maximum occupant deceleration at each velocity was normalized by the maximum deceleration determined in the single impact velocity optimization. The resulting vehicle deceleration-deformation characteristic was a square crash pulse. The objective function was defined as the number of injuries, which was the product of the number of collisions at the velocity and the probability of occupant injury. The optimized vehicle deceleration consisted of a high deceleration in the initial phase, a small deceleration in the middle phase, and then a high deceleration in the final phase. The optimized vehicle crash pulse at a single impact velocity is effective for reducing occupant deceleration in a crash at the specific impact velocity. However, the crash pulse does not necessarily lead to occupant deceleration reduction at a lower velocity. The optimized vehicle deceleration-deformation characteristics, which are effective for all impact velocities, depend on the weighting of the occupant injury measures at each impact velocity.

McDonnell FH-1 Phantom Destroyed for the NACA Crash Fire Program

NASA Image and Video Library

1955-04-21

Researchers at the National Advisory Committee for Aeronautics (NACA) Lewis Flight Propulsion Laboratory purposely wreck a McDonnell FH-1 Phantom as part of the laboratory’s Crash Fire Program. NACA Lewis researchers created the program in 1949 to investigate methods for improving survival rates for take-off and landing-type crashes. In these types of crashes, the passengers often survived the impact only to perish in the ensuing fire. Previously there had been little information on the nature of post-crash fires, and it was difficult to use analytical studies in this area. Irving Pinkel, Chief of the Lewis Flight Propulsion Division, was the primary researcher. He enlisted flight safety specialist and aeronautics researchers G. Merritt Preston and Gerard Pesman, mechanical engineer Dugald Black, and others. The tests were conducted at the nearby Ravenna Arsenal using decommissioned Air Force fighter and transport aircraft. The pilotless aircraft were accelerated down a rail on a 1700-foot track at take-off speeds and run into barriers to simulate a variety of different types of crashes. The first barrier stripped off the landing gears and another briefly sent the aircraft off the ground before it crashed into a dirt mound. Telemetry and high-speed cameras were crucial elements in these studies. NACA Lewis photographer Bill Wynne developed a method for inserting timekeeping devices on test film that were able to show time to one thousandth of a second.

Testing of small and large sign support systems FOIL test number : 92F011

DOT National Transportation Integrated Search

1994-07-01

This test report contains the results of a crash test performed at the Federal Outdoor Impact Laboratory (FOIL) in McLean, Virginia. The test was performed on a small sign support system at 20 mi/h (8.9 m/s), test 92FOll. The vehicle used for these t...

Testing of small and large sign support systems FOIL test number : 92F036

DOT National Transportation Integrated Search

1994-07-01

This test report contains the results of a crash test performed at the Federal Outdoor Impact Laboratory (FOIL) in McLean, Virginia. The test was performed on a small sign support system at 60 mi/h (96.6 km/h), test 92F036. The vehicle used for this ...

Testing of small and large sign support systems FOIL test number : 92F016

DOT National Transportation Integrated Search

1994-07-01

This test report contains the results of a crash test performed at the Federal Outdoor : Impact Laboratory (FOIL) in McLean, Virginia. The test was performed on a small sign : support system at 20 mi/h (8.9 m/s), test 92F016. The vehicle used for the...

Testing of small and large sign support systems FOIL test number : 92F035

DOT National Transportation Integrated Search

1994-07-01

This test report contains the results of a crash test performed at the Federal Outdoor Impact Laboratory (FOIL) in McLean, Virginia. The test was performed on a small sign support system at 20 mi/h (32.2 km/h), test 92F035. The vehicle used for this ...

Testing of small and large sign support systems FOIL test number : 92F038

DOT National Transportation Integrated Search

1994-01-01

This test report contains the results of a crash test performed at the Federal Outdoor Impact Laboratory (FOIL) in McLean, Virginia. The test was performed on a small sign support system at 60 mi/h (96.6 km/h), test 92F038. The vehicle used for this ...

Testing of small and large sign support systems FOIL test number : 92F037

DOT National Transportation Integrated Search

1994-07-01

This test report contains the results of a crash test performed at the Federal Outdoor Impact Laboratory (FOIL) in McLean, Virginia. The test was performed on a small sign support system at 20 mi/h (32.2 km/h), test 92F037. The vehicle used for this ...

Testing of small and large sign support systems FOIL test number : 92F022

DOT National Transportation Integrated Search

1994-07-01

This test report contains the results of a crash test performed at the Federal Outdoor Impact laboratory (FOIL) in Mclean, Virginia. The test was performed on a small sign support system at 20 mi/h (8.9 m/s) , test 92F022. The vehicle used for this t...

Testing of small and large sign support systems FOIL test numbers : 92F040

DOT National Transportation Integrated Search

1994-07-01

This test report contains the results of a crash test performed at the Federal Outdoor Impact Laboratory (FOIL) in McLean, Virginia. The test was performed on a small sign support system at 60 mi/h (96.6 km/h), test 92F040. The vehicle used for this ...

Testing of small and large sign support systems FOIL test number : 92F039

DOT National Transportation Integrated Search

1994-07-01

This test report contains the results of a crash test performed at the Federal Outdoor Impact Laboratory (FOIL) in McLean, Virginia. The test was performed on a small sign support system at 20 mi/h (32.2 km/h) , test 92F039. The vehicle used for this...

Train-to-Train Impact Test of Crash-Energy Management Passenger Rail Equipment: Structural Results

DOT National Transportation Integrated Search

2006-01-01

On March 23, 2006, a full-scale test was conducted on a : passenger rail train retrofitted with newly developed cab end : and non-cab end crush zone designs. This test was conducted : as part of a larger testing program to establish the degree of : e...

Train-to-train impact test of crash energy management passenger rail equipment.

DOT National Transportation Integrated Search

2007-02-01

On March 23, 2006, a full-scale test was conducted on a passenger rail train retrofitted with newly developed cab and coach car crush zone designs. This test was conducted as part of a larger testing program to establish the degree of enhanced perfor...

CID Post-impact fireball

NASA Technical Reports Server (NTRS)

1984-01-01

Following its controlled impact on posts imbedded in the lakebed, the B-720 is sliding sideways and almost enveloped in the large fireball with only the aircraft's nose and right wing-tip exposed. In a typical aircraft crash, fuel spilled from ruptured fuel tanks forms a fine mist that can be ignited by a number of sources at the crash site. In 1984 the NASA Dryden Flight Research Facility (after 1994 a full-fledged Center again) and the Federal Aviation Administration (FAA) teamed-up in a unique flight experiment called the Controlled Impact Demonstration (CID), to test crash a Boeing 720 aircraft using standard fuel with an additive designed to supress fire. The additive, FM-9, a high-molecular-weight long-chain polymer, when blended with Jet-A fuel had demonstrated the capability to inhibit ignition and flame propagation of the released fuel in simulated crash tests. This anti-misting kerosene (AMK) cannot be introduced directly into a gas turbine engine due to several possible problems such as clogging of filters. The AMK must be restored to almost Jet-A before being introduced into the engine for burning. This restoration is called 'degradation' and was accomplished on the B-720 using a device called a 'degrader.' Each of the four Pratt & Whitney JT3C-7 engines had a 'degrader' built and installed by General Electric (GE) to break down and return the AMK to near Jet-A quality. In addition to the AMK research the NASA Langley Research Center was involved in a structural loads measurement experiment, which included having instrumented dummies filling the seats in the passenger compartment. Before the final flight on December 1, 1984, more than four years of effort passed trying to set-up final impact conditions considered survivable by the FAA. During those years while 14 flights with crews were flown the following major efforts were underway: NASA Dryden developed the remote piloting techniques necessary for the B-720 to fly as a drone aircraft; General Electric installed and tested four degraders (one on each engine); and the FAA refined AMK (blending, testing, and fueling a full-size aircraft). The 15 flights had 15 takeoffs, 14 landings and a larger number of approaches to about 150 feet above the prepared crash site under remote control. These flight were used to introduce AMK one step at a time into some of the fuel tanks and engines while monitoring the performance of the engines. On the final flight (No. 15) with no crew, all fuel tanks were filled with a total of 76,000 pounds of AMK and the remotely-piloted aircraft landed on Rogers Dry Lakebed in an area prepared with posts to test the effectiveness of the AMK in a controlled impact. The CID, which some wags called the Crash in the Desert, was spectacular with a large fireball enveloping and burning the B-720 aircraft. From the standpoint of AMK the test was a major set-back, but for NASA Langley, the data collected on crashworthiness was deemed successful and just as important.

CID Post-impact fireball

NASA Technical Reports Server (NTRS)

1984-01-01

The B-720 after impact and sliding through the wing openers is becoming enveloped in a fireball. The right wing appears to be folding over as the aircraft continues to slide. In a typical aircraft crash, fuel spilled from ruptured fuel tanks forms a fine mist that can be ignited by a number of sources at the crash site. In 1984 the NASA Dryden Flight Research Facility (after 1994 a full-fledged Center again) and the Federal Aviation Administration (FAA) teamed-up in a unique flight experiment called the Controlled Impact Demonstration (CID), to test crash a Boeing 720 aircraft using standard fuel with an additive designed to supress fire. The additive, FM-9, a high-molecular-weight long-chain polymer, when blended with Jet-A fuel had demonstrated the capability to inhibit ignition and flame propagation of the released fuel in simulated crash tests. This anti-misting kerosene (AMK) cannot be introduced directly into a gas turbine engine due to several possible problems such as clogging of filters. The AMK must be restored to almost Jet-A before being introduced into the engine for burning. This restoration is called 'degradation' and was accomplished on the B-720 using a device called a 'degrader.' Each of the four Pratt & Whitney JT3C-7 engines had a 'degrader' built and installed by General Electric (GE) to break down and return the AMK to near Jet-A quality. In addition to the AMK research the NASA Langley Research Center was involved in a structural loads measurement experiment, which included having instrumented dummies filling the seats in the passenger compartment. Before the final flight on December 1, 1984, more than four years of effort passed trying to set-up final impact conditions considered survivable by the FAA. During those years while 14 flights with crews were flown the following major efforts were underway: NASA Dryden developed the remote piloting techniques necessary for the B-720 to fly as a drone aircraft; General Electric installed and tested four degraders (one on each engine); and the FAA refined AMK (blending, testing, and fueling a full-size aircraft). The 15 flights had 15 takeoffs, 14 landings and a larger number of approaches to about 150 feet above the prepared crash site under remote control. These flight were used to introduce AMK one step at a time into some of the fuel tanks and engines while monitoring the performance of the engines. On the final flight (No. 15) with no crew, all fuel tanks were filled with a total of 76,000 pounds of AMK and the remotely-piloted aircraft landed on Rogers Dry Lakebed in an area prepared with posts to test the effectiveness of the AMK in a controlled impact. The CID, which some wags called the Crash in the Desert, was spectacular with a large fireball enveloping and burning the B-720 aircraft. From the standpoint of AMK the test was a major set-back, but for NASA Langley, the data collected on crashworthiness was deemed successful and just as important.

CID Aircraft in practice flight above target impact site with wing cutters

NASA Technical Reports Server (NTRS)

1984-01-01

In this photograph the B-720 is seen making a practice close approach over the prepared impact site. The wing openers, designed to tear open the wings and spill the fuel, are clearly seen on the ground just at the start of the bed of rocks. In a typical aircraft crash, fuel spilled from ruptured fuel tanks forms a fine mist that can be ignited by a number of sources at the crash site. In 1984 the NASA Dryden Flight Research Facility (after 1994 a full-fledged Center again) and the Federal Aviation Administration (FAA) teamed-up in a unique flight experiment called the Controlled Impact Demonstration (CID), to test crash a Boeing 720 aircraft using standard fuel with an additive designed to supress fire. The additive, FM-9, a high-molecular-weight long-chain polymer, when blended with Jet-A fuel had demonstrated the capability to inhibit ignition and flame propagation of the released fuel in simulated crash tests. This anti-misting kerosene (AMK) cannot be introduced directly into a gas turbine engine due to several possible problems such as clogging of filters. The AMK must be restored to almost Jet-A before being introduced into the engine for burning. This restoration is called 'degradation' and was accomplished on the B-720 using a device called a 'degrader.' Each of the four Pratt & Whitney JT3C-7 engines had a 'degrader' built and installed by General Electric (GE) to break down and return the AMK to near Jet-A quality. In addition to the AMK research the NASA Langley Research Center was involved in a structural loads measurement experiment, which included having instrumented dummies filling the seats in the passenger compartment. Before the final flight on December 1, 1984, more than four years of effort passed trying to set-up final impact conditions considered survivable by the FAA. During those years while 14 flights with crews were flown the following major efforts were underway: NASA Dryden developed the remote piloting techniques necessary for the B-720 to fly as a drone aircraft; General Electric installed and tested four degraders (one on each engine); and the FAA refined AMK (blending, testing, and fueling a full-size aircraft). The 15 flights had 15 takeoffs, 14 landings and a larger number of approaches to about 150 feet above the prepared crash site under remote control. These flight were used to introduce AMK one step at a time into some of the fuel tanks and engines while monitoring the performance of the engines. On the final flight (No. 15) with no crew, all fuel tanks were filled with a total of 76,000 pounds of AMK and the remotely-piloted aircraft landed on Rogers Dry Lakebed in an area prepared with posts to test the effectiveness of the AMK in a controlled impact. The CID, which some wags called the Crash in the Desert, was spectacular with a large fireball enveloping and burning the B-720 aircraft. From the standpoint of AMK the test was a major set-back, but for NASA Langley, the data collected on crashworthiness was deemed successful and just as important.

The virtual morphology and the main movements of the human neck simulations used for car crash studies

NASA Astrophysics Data System (ADS)

Ciunel, St.; Tica, B.

2016-08-01

The paper presents the studies made on a similar biomechanical system composed by neck, head and thorax bones. The models were defined in a CAD environment which includes Adams algorithm for dynamic simulations. The virtual models and the entire morphology were obtained starting with CT images made on a living human subject. The main movements analyzed were: axial rotation (left-right), lateral bending (left-right) and flexion- extension movement. After simulation was obtained the entire biomechanical behavior based on data tables or diagrams. That virtual model composed by neck and head can be included in complex system (as a car system) and supposed to several impact simulations (virtual crash tests). Also, our research team built main components of a testing device for dummy car crash neck-head system using anatomical data.

Delamination Modeling of Composites for Improved Crash Analysis

NASA Technical Reports Server (NTRS)

Fleming, David C.

1999-01-01

Finite element crash modeling of composite structures is limited by the inability of current commercial crash codes to accurately model delamination growth. Efforts are made to implement and assess delamination modeling techniques using a current finite element crash code, MSC/DYTRAN. Three methods are evaluated, including a straightforward method based on monitoring forces in elements or constraints representing an interface; a cohesive fracture model proposed in the literature; and the virtual crack closure technique commonly used in fracture mechanics. Results are compared with dynamic double cantilever beam test data from the literature. Examples show that it is possible to accurately model delamination propagation in this case. However, the computational demands required for accurate solution are great and reliable property data may not be available to support general crash modeling efforts. Additional examples are modeled including an impact-loaded beam, damage initiation in laminated crushing specimens, and a scaled aircraft subfloor structures in which composite sandwich structures are used as energy-absorbing elements. These examples illustrate some of the difficulties in modeling delamination as part of a finite element crash analysis.

Energy absorption capability of foam-based composite materials and their applications as seat cushions in aircraft crashworthiness

NASA Astrophysics Data System (ADS)

Kh. Beheshti, Hamid

This study is focusing on the application of foam materials in aviation. These materials are being used for acoustic purposes, as padding in the finished interior panels of the aircraft, and as seat cushions. Foams are mostly used in seating applications. Since seat cushion is directly interacting with the body of occupant, it has to be ergonomically comfortable beside of absorbing the energy during the impact. All the seats and seat cushions have to pass regulations defined by Federal Aviation Administration (FAA). In fact, all airplane companies are required to certify the subcomponents of aircrafts before installing them on the main structure, fuselage. Current Federal Aviation Administration Regulations require a dynamic sled test of the entire seat system for certifying the seat cushions. This dynamic testing is required also for replacing the deteriorated cushions with new cushions. This involves a costly and time-consuming certification process. AGATE group has suggested a procedure based on quasi-static testing in order to certify new seat cushions without conducting full-scale dynamic sled testing. AGATE subcomponent methodology involves static tests of the energy-absorbing foam cushions and design validation by conducting a full-scale dynamic seat test. Microscopic and macroscopic studies are necessary to provide a complete understanding about performance of foams during the crash. Much investigation has been done by different sources to obtain the reliable modeling in terms of demonstration of mechanical behavior of foams. However, rate sensitivity of foams needs more attention. A mathematical hybrid dynamic model for the cushion underneath of the human body will be taken into consideration in this research. Analytical and finite element codes such as MADYMO and LS-DYNA codes have the potential to greatly speed up the crashworthy design process, to help certify seats and aircraft to dynamic crash loads, to predict seat and occupant response to impact with the probability of injury, and to evaluate numerous crash scenarios not economically feasible with full-scale crash testing. Therefore, these codes are being used to find the accurate response of spinal load during the impact of model including human body, seat cushion and seat under different acceleration pulses. (Abstract shortened by UMI.)

Crash analysis of lower extremity injuries in children restrained in forward-facing car seats during front and rear impacts.

PubMed

Bennett, Tellen D; Kaufman, Robert; Schiff, Melissa; Mock, Charles; Quan, Linda

2006-09-01

The mechanism, crash characteristics, and spectrum of lower extremity injuries in children restrained in forward-facing car seats during front and rear impacts have not been described. We identified in two databases children who sustained lower extremity injuries while restrained in forward-facing car seats. To identify the mechanism, we analyzed crash reconstructions from three frontal-impact cases from the Crash Injury Research and Engineering Network. To further describe the crash and injury characteristics we evaluated children between 1 and 4 years of age with lower extremity injuries from front or rear impacts in the National Automotive Sampling System (NASS) Crashworthiness Data System (CDS) database. Crash reconstruction data demonstrated that the likely mechanism of lower extremity injury was contact between the legs and the front seatbacks. In the CDS database, we identified 15 children with lower extremity injuries in a forward-facing child seat, usually (13 out of 15) placed in the rear seat, incurred in frontal impacts (11 out of 15). Several (5 out of 15) children were in unbelted or improperly secured forward-facing car seats. Injury Severity Scores varied widely (5-50). Children in forward-facing car seats involved in severe front or rear crashes may incur a range of lower extremity injury from impact with the car interior component in front of them. Crash scene photography can provide useful information about anatomic sites at risk for injury and alert emergency department providers to possible subtle injury.

Modeling occupants in far-side impacts.

PubMed

Douglas, Clay; Fildes, Brian; Gibson, Tom

2011-10-01

Far-side impacts are not part of any regulated NCAP, FMVSS, or similar test regime despite accounting for 43 percent of the seriously injured persons and 30 percent of the harm in U.S. side impact crashes. Furthermore, injuries to the head and thorax account for over half of the serious injuries sustained by occupants in far-side crashes. Despite this, there is no regulated or well-accepted anthropomorphic test device (ATD) or computer model available to investigate far-side impacts. As such, this presents an opportunity to assess a computer model that can be used to measure the effect of varying restraint parameters on occupant biomechanics in far-side impacts. This study sets out to demonstrate the modified TASS human facet model's (MOTHMO) capabilities in modeling whole-body response in far-side impacts. MOTHMO's dynamic response was compared to that of postmortem human subjects (PMHS), WorldSID, and Thor-NT in a series of far-side sled tests. The advantages, disadvantages, and differences of using MOTHMO compared to ATDs were highlighted and described in terms of model design and instrumentation. Potential applications and improvements for MOTHMO were also recommended. The results showed that MOTHMO is capable of replicating the seat belt-to-shoulder complex interaction, pelvis impacts, head displacement, neck and shoulder belt loading from inboard mounted belts, and impacts from multiple directions. Overall, the model performed better than Thor-NT and at least as well as WorldSID when compared to PMHS results. Though WorldSID and Thor-NT ATDs were capable of reproducing many of these impact loads, measuring the seat belt-to-shoulder complex interaction and thoracic deflection at multiple sites and directions was less accurately handled. This study demonstrated that MOTHMO is capable of modeling whole-body response in far-side impacts. Furthermore, MOTHMO can be used as a virtual design tool to explore the effect of varying restraint parameters on occupant kinematics in far-side crash configurations.

Pendulum Testing of an FRP Composite Guardrail: FOIL Test Numbers 96POl9 Through 96PO23, 97POO1, and 97POO2

DOT National Transportation Integrated Search

1998-03-01

This report contains the test setup and results from seven pendulum crash : tests conducted at the Federal Outdoor Impact Laboratory (FOIL) located at the Turner-Fairbank Highway Research Center (TFHRC) in McLean, Virginia. The tests were conducted o...

Sled Tests Using the Hybrid III Rail Safety ATD and Workstation Tables for Passenger Trains

DOT National Transportation Integrated Search

2017-08-01

The Hybrid III Rail Safety (H3-RS) anthropomorphic test device (ATD) is a crash test dummy developed in the United Kingdom to evaluate abdomen and lower thorax injuries that occur when passengers impact workstation tables during train accidents. The ...

Analysis of the mechanism of injury in non-fatal vehicle-to-pedestrian and vehicle-to-bicyclist frontal crashes in Sweden.

PubMed

Öman, Mikael; Fredriksson, Rikard; Bylund, Per-Olof; Björnstig, Ulf

2016-12-01

The aim of this paper is to analyse and compare injuries and injury sources in pedestrian and bicyclist non-fatal real-life frontal passengercar crashes, considering in what way pedestrian injury mitigation systems also might be adequate for bicyclists. Data from 203 non-fatal vehicle-to-pedestrian and vehicle-to-bicyclist crashes from 1997 through 2006 in a city in northern Sweden were analysed by use of the hospitals injury data base in addition to interviews with the injured. In vehicle-to-pedestrian crashes (n = 103) head and neck injuries were in general due to hitting the windscreen frame, while in vehicle-to-bicycle crashes (n = 100) head and neck injuries were typically sustained by ground impact. Abdominal, pelvic and thoracic injuries in pedestrians and thoracic injuries in bicyclists were in general caused by impacting the bonnet. In vehicle-to-pedestrian crashes, energy reducing airbags at critical impact points with low yielding ability on the car, as the bonnet and the windscreen frame, might reduce injuries. As vehicle-to-bicyclist crashes occurred mostly in good lighting conditions and visibility and the ground impact causing almost four times as many injuries as an impact to the different regions of the car, crash avoidance systems as well as separating bicyclists from motor traffic, may contribute to mitigate these injuries.

Injury mitigation estimates for an intersection driver assistance system in straight crossing path crashes in the United States.

PubMed

Scanlon, John M; Sherony, Rini; Gabler, Hampton C

2017-05-29

Accounting for one fifth of all crashes and one sixth of all fatal crashes in the United States, intersection crashes are among the most frequent and fatal crash modes. Intersection advanced driver assistance systems (I-ADAS) are emerging vehicle-based active safety systems that aim to help drivers safely navigate intersections. The objective of this study was to estimate the number of crashes and number of vehicles with a seriously injured driver (Maximum Abbreviated Injury Scale [MAIS] 3+) that could be prevented or reduced if, for every straight crossing path (SCP) intersection crash, one of the vehicles had been equipped with an I-ADAS. This study retrospectively simulated 448 U.S. SCP crashes as if one of the vehicles had been equipped with I-ADAS. Crashes were reconstructed to determine the path and speeds traveled by the vehicles. Cases were then simulated with I-ADAS. A total of 30 variations of I-ADAS were considered in this study. These variations consisted of 5 separate activation timing thresholds, 3 separate computational latency times, and 2 different I-ADAS response modalities (i.e., a warning or autonomous braking). The likelihood of a serious driver injury was computed for every vehicle in every crash using impact delta-V. The results were then compiled across all crashes in order to estimate system effectiveness. The model predicted that an I-ADAS that delivers an alert to the driver has the potential to prevent 0-23% of SCP crashes and 0-25% of vehicles with a seriously injured driver. Conversely, an I-ADAS that autonomously brakes was found to have the potential to prevent 25-59% of crashes and 38-79% of vehicles with a seriously injured driver. I-ADAS effectiveness is a strong function of design. Increasing computational latency time from 0 to 0.5 s was found to reduce crash and injury prevention estimates by approximately one third. For an I-ADAS that delivers an alert, crash/injury prevention effectiveness was found to be very sensitive to changes in activation timing (warning delivered 1.0 to 3.0 s prior to impact). If autonomous braking was used, system effectiveness was found to largely plateau for activation timings greater than 1.5 s prior to impact. In general, the results of this study suggest that I-ADAS will be 2-3 times more effective if an autonomous braking system is utilized over a warning-based system. This study highlights the potential effectiveness of I-ADAS in the U.S. vehicle fleet, while also indicating the sensitivity of system effectiveness to design specifications. The results of this study should be considered by designers of I-ADAS and evaluators of this technology considering a future I-ADAS safety test.

49 CFR 572.190 - Incorporated materials.

Code of Federal Regulations, 2014 CFR

2014-10-01

... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) ANTHROPOMORPHIC TEST DEVICES SID-IIsD Side Impact Crash... procedures manual entitled, “Procedures for Assembly, Disassembly, and Inspection (PADI) of the SID-IIsD Side...

49 CFR 572.190 - Incorporated materials.

Code of Federal Regulations, 2013 CFR

2013-10-01

... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) ANTHROPOMORPHIC TEST DEVICES SID-IIsD Side Impact Crash... procedures manual entitled, “Procedures for Assembly, Disassembly, and Inspection (PADI) of the SID-IIsD Side...

A METHOD FOR DETERMINING THE RADIALLY-AVERAGED EFFECTIVE IMPACT AREA FOR AN AIRCRAFT CRASH INTO A STRUCTURE

DOE Office of Scientific and Technical Information (OSTI.GOV)

Walker, William C.

This report presents a methodology for deriving the equations which can be used for calculating the radially-averaged effective impact area for a theoretical aircraft crash into a structure. Conventionally, a maximum effective impact area has been used in calculating the probability of an aircraft crash into a structure. Whereas the maximum effective impact area is specific to a single direction of flight, the radially-averaged effective impact area takes into consideration the real life random nature of the direction of flight with respect to a structure. Since the radially-averaged effective impact area is less than the maximum effective impact area, themore » resulting calculated probability of an aircraft crash into a structure is reduced.« less

Secondary Collisions Following a Traffic Barrier Impact: Frequency, Factors, and Occupant Risk

PubMed Central

Gabauer, Douglas J.

2010-01-01

This study has investigated secondary collisions following an initial barrier impact in tow-away level crashes. The analysis included 2026 barrier impact cases that were selected from 12-years of in-depth crash data available through the National Automotive Sampling System (NASS) / Crashworthiness Data System (CDS). Secondary collisions were found to occur in approximately one-third of tow-away level crashes where a traffic barrier was the first object struck. Secondary crashes were found to primarily involve an impact to another vehicle, an impact to another barrier, or a rollover; tree and pole impacts were found to represent a much smaller proportion of secondary impacts. Through a detailed analysis of vehicle trajectory, this study supports previous research suggesting secondary collision risk is substantial even for vehicles not ultimately involved in a secondary collision. Compared to a single barrier impact, the occurrence of a secondary collision was found to increase the risk of serious occupant injury by a factor of 3.5, equivalent to the serious injury risk difference found between a belted and unbelted occupant in a traffic barrier crash. PMID:21050605

Testing of small and large sign support systems FOIL test number : 92F017

DOT National Transportation Integrated Search

1994-07-01

This test report contains the results of a crash test performed at the Federal Outdoor Impact Laboratory (FOIL) in McLean, Virginia. The test was performed on a small sign support system at 20 mi/h (8.9 m/s), test 92F017. The vehicle used for this te...

Testing of small and large sign support systems FOIL test number : 92F026

DOT National Transportation Integrated Search

1994-07-01

This test report contains the results of a crash test performed at the Federal Outdoor Impact Laboratory (FOIL) in McLean, Virginia. The test was performed on a small sign support system at 20 mi/h (8.9 m/s), test 92F026. The vehicle used for this te...

Testing of small and large sign support systems FOIL test number : 92F018

DOT National Transportation Integrated Search

1994-07-01

This test report contains the results of a crash test performed at the Federal Outdoor Impact Laboratory (FOIL) in McLean, Virginia. The test was performed on a small sign support system at 20 mi/h (8.9 m/s), test 92F018. The vehicle used for this te...

Testing of small and large sign support systems FOIL test number : 92F015

DOT National Transportation Integrated Search

1994-07-01

This test report contains the results of a crash test performed at the Federal Outdoor Impact Laboratory (FOIL) in McLean, Virginia. The test was performed on a small sign support system at 20 mi/h (8.9 m/s), test 92F015. The vehicle used for these t...

Testing of small and large sign support systems FOIL test number : 92F012

DOT National Transportation Integrated Search

1994-07-01

This test report contains the results of a crash test performed at the Federal Outdoor Impact Laboratory (FOIL) in McLean, Virginia. The test was performed on a small sign support system at 20 mi/h (8.9 m/s), test 92F012. The vehicle used for these t...

Testing of small and large sign support systems FOIL test number : 92F023

DOT National Transportation Integrated Search

1994-07-01

This test report contains the results of a crash test performed at the Federal Outdoor Impact Laboratory (FOIL) in McLean, Virginia. The test was performed on a small sign support system at 20 mi/h (8.9 m/s), test 92F023. The vehicle used for this te...

Testing of small and large sign support systems FOIL test number : 92F019

DOT National Transportation Integrated Search

1994-07-01

This test report contains the results of a crash test performed at the Federal Outdoor Impact Laboratory (FOIL) in McLean, Virginia. The test was performed on a small sign support system at 20 mi/h (8.9 m/s), test 92F019. The vehicle used for this te...

Testing of small and large sign support systems FOIL test number : 92F014

DOT National Transportation Integrated Search

1994-07-01

This test report contains the results of a crash test performed at the Federal Outdoor Impact Laboratory (FOIL) in McLean, Virginia. The test was performed on a small sign support system at 20 mi/h (8.9 m/s), test 92F014. The vehicle used for these t...

Passenger vehicles sustain huge damage in 5 Mph tests

DOT National Transportation Integrated Search

2000-04-15

Seventeen new cars, all 1999 and 2000 models, turned in mostly disappointing results in 5 mph crash tests conducted to assess how well the bumpers resist costly damage in the kinds of impacts that frequently occur in commuter traffic and parking lots...

MASH test 3-11 on the 5-inch cast in place deck barrier anchors.

DOT National Transportation Integrated Search

2011-12-01

A full-scale crash test was performed to evaluate the impact performance of a Texas T223 concrete : beam and post bridge rail anchored to a 5-inch cast-in-place deck (CIPD). The testing followed the MASH : standards for Test Level 3 (TL-3) longitudin...

Mechanisms of motor vehicle crashes related to burns--an analysis of the German In depth Accident Study (GIDAS) database.

PubMed

Brand, S; Otte, D; Stübig, T; Petri, M; Ettinger, M; Mueller, C W; Krettek, C; Haasper, C; Probst, C

2013-12-01

Patients of motor vehicle crashes (MVCs) suffering burns are challenging for the rescue team and the admitting hospital. These patients often face worse outcomes than crash patients with trauma only. Our analysis of the German In-depth Accident Study (GIDAS) database researches the detailed crash mechanisms to identify potential prevention measures. We analyzed the 2011 GIDAS database comprising 14,072 MVC patients and compared individuals with (Burns) and without (NoBurns) burns. Only complete data sets were included. Patients with burns obviously resulting of air bag deployment only were not included in the Burns group. Data acquisition by an on call team of medical and technical researchers starts at the crash scene immediately after the crash and comprises technical data as well as medical information until discharge from the hospital. Statistical analysis was done by Mann-Whitney-U-test. Level of significance was p < 0.05. 14,072 MVC patients with complete data sets were included in the analysis. 99 individuals suffered burns (0.7%; group "Burns"). Demographic data and injury severity showed no statistical significant difference between the two groups of Burns and NoBurns. Injury severity was measured using the Injury Severity Score (ISS). Direct frontal impact (Burns: 48.5% vs. NoBurns: 33%; p < 0.05) and high-energy impacts as represented by delta-v (m/s) (Burns: 33.5 ± 21.4 vs. NoBurns: 25.2 ± 15.9; p < 0.05) were significantly different between groups as was mortality (Burns: 12.5% vs. NoBurns: 2.1%; p < 0.05). Type of patients' motor vehicles and type of crash opponent showed no differences. Our results show, that frontal and high-energy impacts are associated with a frequency of burns. This may serve automobile construction companies to improve the burn safety to prevent flames spreading from the motor compartment to the passenger compartment. Communities may impose speed limits in local crash hot spots. Copyright © 2013 Elsevier Ltd and ISBI. All rights reserved.

Relationship between accident severity and full-scale crash test. Volume II, Appendices

DOT National Transportation Integrated Search

1984-08-01

Available accident files are used to generate a 4l2-accident data base of guardrail impacts. This base is analyzed to develop a statistical model for predicting accident severity index (ASI) as a function of vehicle type or weight, impact speed, and ...

Evaluation of Vehicle-Based Crash Severity Metrics.

PubMed

Tsoi, Ada H; Gabler, Hampton C

2015-01-01

Vehicle change in velocity (delta-v) is a widely used crash severity metric used to estimate occupant injury risk. Despite its widespread use, delta-v has several limitations. Of most concern, delta-v is a vehicle-based metric which does not consider the crash pulse or the performance of occupant restraints, e.g. seatbelts and airbags. Such criticisms have prompted the search for alternative impact severity metrics based upon vehicle kinematics. The purpose of this study was to assess the ability of the occupant impact velocity (OIV), acceleration severity index (ASI), vehicle pulse index (VPI), and maximum delta-v (delta-v) to predict serious injury in real world crashes. The study was based on the analysis of event data recorders (EDRs) downloaded from the National Automotive Sampling System / Crashworthiness Data System (NASS-CDS) 2000-2013 cases. All vehicles in the sample were GM passenger cars and light trucks involved in a frontal collision. Rollover crashes were excluded. Vehicles were restricted to single-event crashes that caused an airbag deployment. All EDR data were checked for a successful, completed recording of the event and that the crash pulse was complete. The maximum abbreviated injury scale (MAIS) was used to describe occupant injury outcome. Drivers were categorized into either non-seriously injured group (MAIS2-) or seriously injured group (MAIS3+), based on the severity of any injuries to the thorax, abdomen, and spine. ASI and OIV were calculated according to the Manual for Assessing Safety Hardware. VPI was calculated according to ISO/TR 12353-3, with vehicle-specific parameters determined from U.S. New Car Assessment Program crash tests. Using binary logistic regression, the cumulative probability of injury risk was determined for each metric and assessed for statistical significance, goodness-of-fit, and prediction accuracy. The dataset included 102,744 vehicles. A Wald chi-square test showed each vehicle-based crash severity metric estimate to be a significant predictor in the model (p < 0.05). For the belted drivers, both OIV and VPI were significantly better predictors of serious injury than delta-v (p < 0.05). For the unbelted drivers, there was no statistically significant difference between delta-v, OIV, VPI, and ASI. The broad findings of this study suggest it is feasible to improve injury prediction if we consider adding restraint performance to classic measures, e.g. delta-v. Applications, such as advanced automatic crash notification, should consider the use of different metrics for belted versus unbelted occupants.

From road to lab to math: the co-evolution of technological, regulatory, and organizational innovations for automotive crash testing.

PubMed

Leonardi, Paul M

2010-04-01

Today, in the midst of economic crisis, senior executives at US automakers and influential industry analysts frequently reflect on the progression that safety testing has taken from the crude trials done on the road, to controlled laboratory experiments, and to today's complex math-based simulation models. They use stories of this seemingly linear and natural sequence to justify further investment in simulation technologies. The analysis presented in this paper shows that change in the structures of automakers' organizations co-evolved with regulations specifying who was at fault in vehicle impacts, how vehicles should be built to withstand the force of an impact, and how testing should be done to assure that vehicles met those requirements. Changes in the regulatory environment were bolstered by new theories about crash test dynamics and changing technologies with which to test those theories. Thus, as new technological and regulatory innovations co-evolved with innovations in organizational structuring, ideas about how to best conduct crash tests shifted and catalyzed new cycles of technological, regulatory, and organizational innovation. However, this co-evolutionary story tells us that the move from road to lab to math was not natural or linear as today's managerial rhetoric would have us believe. Rather, the logic of math-based simulation was the result of technological, regulatory and organizational changes that created an industry-wide ideology that supported the move toward math while making it appear natural within the shifting structure of the industry.

The Use of a Vehicle Acceleration Exposure Limit Model and a Finite Element Crash Test Dummy Model to Evaluate the Risk of Injuries During Orion Crew Module Landings

NASA Technical Reports Server (NTRS)

Lawrence, Charles; Fasanella, Edwin L.; Tabiei, Ala; Brinkley, James W.; Shemwell, David M.

2008-01-01

A review of astronaut whole body impact tolerance is discussed for land or water landings of the next generation manned space capsule named Orion. LS-DYNA simulations of Orion capsule landings are performed to produce a low, moderate, and high probability of injury. The paper evaluates finite element (FE) seat and occupant simulations for assessing injury risk for the Orion crew and compares these simulations to whole body injury models commonly referred to as the Brinkley criteria. The FE seat and crash dummy models allow for varying the occupant restraint systems, cushion materials, side constraints, flailing of limbs, and detailed seat/occupant interactions to minimize landing injuries to the crew. The FE crash test dummies used in conjunction with the Brinkley criteria provides a useful set of tools for predicting potential crew injuries during vehicle landings.

The impact of later trading hours for hotels on levels of impaired driver road crashes and driver breath alcohol levels.

PubMed

Chikritzhs, Tanya; Stockwell, Tim

2006-09-01

To examine the impact of later trading hours for licensed hotels in Perth, Western Australia on levels of associated impaired driver road crashes and driver breath alcohol levels (BALs). Police data on the "last place of drinking" for impaired drivers involved in road crashes and their corresponding BALs were examined to identify those associated with Perth hotels between 1 July 1990 and 30 June 1997. During this period, 43 (23%) of the 186 hotels meeting study criteria were granted an Extended Trading Permit for 1 a.m. closing (ETP hotels), while the rest continued to close at midnight (non-ETP hotels). Time-series analyses employing multiple linear regressions were applied to determine whether an association existed between the introduction of extended trading and (i) monthly levels of impaired driver road crashes associated with ETP hotels and (ii) driver BALs associated with ETP hotels. Trends associated with non-ETP hotels were included as controls and possible confounders were considered. After controlling for the trend in crash rates associated with non-ETP hotels and the introduction of mobile police breath testing stations to Perth freeways, a significant increase in monthly crash rates for ETP hotels was found. This relationship was largely accounted for by higher volumes of high-alcohol content beer, wine and spirits purchased by ETP hotels. No relation was found between driver BALs and the introduction of ETPs. Late trading was associated with increased levels of impaired driver road crashes and alcohol consumption, particularly high-risk alcoholic beverages. Greater numbers of patrons and characteristics specific to clientele of hotels which applied for late trading hours (i.e. younger age, greater propensity to drunk-drive, preference for high-risk beverages) were suggested as having contributed to this increase.

Relationship between accident severity and full-scale crash test. Volume I, Technical research effort

DOT National Transportation Integrated Search

1984-08-01

Available accident files are used to generate a 4l2-accident data base of guardrail impacts. This base is analyzed to develop a statistical model for predicting accident severity index (ASI) as a function of vehicle type or weight, impact speed, and ...

The drink driving situation in Colombia.

PubMed

Castaño, Ramón

2012-01-01

To describe and analyze the drink driving situation in Colombia. The assessment was based on semistructured interviews of key stakeholders and analysis of secondary data. Road traffic crashes caused 5704 deaths and injured 39,318 people in 2010. The 3 main sources of crash data-forensic authorities, traffic authorities, and motor vehicle insurance agencies-provide different information about crashes, drivers, and victims, but they cannot be routinely merged. This together with the problem of identifying alcohol as the cause of a crash makes it difficult to estimate the role of drink driving in road crashes. In addition, reliable figures for the incidence of drink driving are not available from the random breath test programs because of sampling issues, underreporting, and missing data on negative results. However, it can be argued that alcohol plays a role in fatalities, because the proportion of crashes involving fatalities rises on weekends and between 12:00 a.m. and 05:59 a.m. when drink driving is likely to occur. Colombia has strict drink-drive laws that specify 3 levels of offense and sanctions (level I: 40- 99 mg/100 mL, level II: 100-149 mg/100 mL, and level III: 150 mg/100 mL or above). Drivers responsible for causing crashes with fatalities and injuries can be imprisoned under criminal law and sentences are increased by 50 to 100 percent if they test positive for alcohol. Enforcement includes random breath testing for alcohol, but its impact is weakened by the lack of a legal requirement to submit to a test and poor implementation of sanctions. There have been mass media campaigns against drink driving including one linked to a major enforcement initiative in 2008. However, there was a consensus that most campaigns were not focused sufficiently on increasing drivers' perceived risk of being caught. According to those interviewed, campaigns aimed at responsible consumption and the use of designated drivers appear to have had a growing positive effect, but these impacts have not been empirically assessed. The Road Prevention Fund is a Sui Generis institution in Colombia that has played a key role in tackling the drink driving problem. Legal blood alcohol concentration (BAC) limits are on a par with international standards and the traffic authorities carry out regular roadside sobriety checks. However, the enforcement is weakened by poor implementation of sanctions. In addition, issues with data mean that the nature and extent of drink driving in Colombia cannot be accurately monitored. Copyright © 2012 Taylor & Francis Group, LLC

Lateral automobile impacts and the risk of traumatic brain injury.

PubMed

Bazarian, Jeffrey J; Fisher, Susan Gross; Flesher, William; Lillis, Robert; Knox, Kerry L; Pearson, Thomas A

2004-08-01

We determine the relative risk and severity of traumatic brain injury among occupants of lateral impacts compared with occupants of nonlateral impacts. This was a secondary analysis of the National Highway Traffic Safety Administration's National Automotive Sampling System, Crashworthiness Data Systems for 2000. Analysis was restricted to occupants of vehicles in which at least 1 person experienced an injury with Abbreviated Injury Scale score greater than 2. Traumatic brain injury was defined as an injury to the head or skull with an Abbreviated Injury Scale score greater than 2. Outcomes were analyzed using the chi2 test and multivariate logistic regression, with adjustment of variance to account for weighted probability sampling. Of the 1,115 occupants available for analysis, impact direction was lateral for 230 (18.42%) occupants and nonlateral for 885 (81.58%) occupants. One hundred eighty-seven (16.07%) occupants experienced a traumatic brain injury, 14.63% after lateral and 16.39% after nonlateral impact. The unadjusted relative risk of traumatic brain injury after lateral impact was 0.89 (95% confidence interval [CI] 0.51 to 1.56). After adjusting for several important crash-related variables, the relative risk of traumatic brain injury was 2.60 (95% CI 1.1 to 6.0). Traumatic brain injuries were more severe after lateral impact according to Abbreviated Injury Scale and Glasgow Coma Scale scores. The proportion of fatal or critical crash-related traumatic brain injuries attributable to lateral impact was 23.5%. Lateral impact is an important independent risk factor for the development of traumatic brain injury after a serious motor vehicle crash. Traumatic brain injuries incurred after lateral impact are more severe than those resulting from nonlateral impact. Vehicle modifications that increase head protection could reduce crash-related severe traumatic brain injuries by up to 61% and prevent up to 2,230 fatal or critical traumatic brain injuries each year in the United States.

The Effectiveness of the Component Impact Test Method for the Side Impact Injury Assessment of the Door Trim

NASA Astrophysics Data System (ADS)

Youn, Younghan; Koo, Jeong-Seo

The complete evaluation of the side vehicle structure and the occupant protection is only possible by means of the full scale side impact crash test. But, auto part manufacturers such as door trim makers can not conduct the test especially when the vehicle is under the developing process. The main objective of this study is to obtain the design guidelines by a simple component level impact test. The relationship between the target absorption energy and impactor speed were examined using the energy absorbed by the door trim. Since each different vehicle type required different energy levels on the door trim. A simple impact test method was developed to estimate abdominal injury by measuring reaction force of the impactor. The reaction force will be converted to a certain level of the energy by the proposed formula. The target of absorption energy for door trim only and the impact speed of simple impactor are derived theoretically based on the conservation of energy. With calculated speed of dummy and the effective mass of abdomen, the energy allocated in the abdomen area of door trim was calculated. The impactor speed can be calculated based on the equivalent energy of door trim absorbed during the full crash test. With the proposed design procedure for the door trim by a simple impact test method was demonstrated to evaluate the abdominal injury. This paper describes a study that was conducted to determine sensitivity of several design factors for reducing abdominal injury values using the matrix of orthogonal array method. In conclusion, with theoretical considerations and empirical test data, the main objective, standardization of door trim design using the simple impact test method was established.

Perception and biodynamics in unalerted precrash response.

PubMed

McGehee, Daniel V; Carsten, Oliver M J

2010-01-01

This research seeks to better understand unalerted driver response just prior to a serious vehicle crash. Few studies have been able to view a crash from the inside-with a camera focused on the driver and occupants. Four studies are examined: 1) a high-fidelity simulator study with an unalerted intersection incursion crash among 107 drivers; 2) four crashes from the Virginia Tech Transportation Institute (VTTI) 100 car study; 3) 58 crashes from vehicles equipped with an event triggered video recorder; and 4) a custom-designed high-fidelity simulator experiment that examined unalerted driver response to a head-on crash with a heavy truck. Analyses concentrate on decomposing driver perception, action, facial and postural changes with a focus on describing the neurophysiologic mechanisms designed to respond to danger. Results indicate that drivers involved in severe crashes generally have preview that an impact is about to occur. They respond first with vehicle control inputs (accelerator pedal release) along with facial state changes and withdrawal of the head back towards the head restraint. These responses frequently occur almost simultaneously, providing safety system designers with a number of reliable driver performance measures to monitor. Understanding such mechanisms may assist future advanced driver assistance systems (ADAS), advanced restraints, model development of advanced anthropomorphic test dummies (ATDs), injury prediction and the integration of active and passive safety systems.

Analysis of the injury severity of crashes by considering different lighting conditions on two-lane rural roads.

PubMed

Jafari Anarkooli, A; Hadji Hosseinlou, M

2016-02-01

Many studies have examined different factors contributing to the injury severity of crashes; however, relatively few studies have focused on the crashes by considering the specific effects of lighting conditions. This research investigates lighting condition differences in the injury severity of crashes using 3-year (2009-2011) crash data of two-lane rural roads of the state of Washington. Separate ordered-probit models were developed to predict the effects of a set of factors expected to influence injury severity in three lighting conditions; daylight, dark, and dark with street lights. A series of likelihood ratio tests were conducted to determine if these lighting condition models were justified. The modeling results suggest that injury severity in specific lighting conditions are associated with contributing factors in different ways, and that such differences cannot be uncovered by focusing merely on one aggregate model. Key differences include crash location, speed limit, shoulder width, driver action, and three collision types (head-on, rear-end, and right-side impact collisions). This paper highlights the importance of deploying street lights at and near intersections (or access points) on two-lane rural roads because injury severity highly increases when crashes occur at these points in dark conditions. Copyright © 2016 Elsevier Ltd and National Safety Council. All rights reserved.

Design of the Cross Section Shape of AN Aluminum Crash Box for Crashworthiness Enhancement of a CAR

NASA Astrophysics Data System (ADS)

Kim, S. B.; Huh, H.; Lee, G. H.; Yoo, J. S.; Lee, M. Y.

This paper deals with the crashworthiness of an aluminum crash box for an auto-body with the various shapes of cross section such as a rectangle, a hexagon and an octagon. First, crash boxes with various cross sections were tested with numerical simulation to obtain the energy absorption capacity and the mean load. In case of the simple axial crush, the octagon shape shows higher mean load and energy absorption than the other two shapes. Secondly, the crash boxes were assembled to a simplified auto-body model for the overall crashworthiness. The model consists of a bumper, crash boxes, front side members and a sub-frame representing the behavior of a full car at the low speed impact. The analysis result shows that the rectangular cross section shows the best performance as a crash box which deforms prior to the front side member. The hexagonal and octagonal cross sections undergo torsion and local buckling as the width of cross section decreases while the rectangular cross section does not. The simulation result of the rectangular crash box was verified with the experimental result. The simulation result shows close tendency in the deformed shape and the load-displacement curve to the experimental result.

Exploratory multinomial logit model-based driver injury severity analyses for teenage and adult drivers in intersection-related crashes.

PubMed

Wu, Qiong; Zhang, Guohui; Ci, Yusheng; Wu, Lina; Tarefder, Rafiqul A; Alcántara, Adélamar Dely

2016-05-18

Teenage drivers are more likely to be involved in severely incapacitating and fatal crashes compared to adult drivers. Moreover, because two thirds of urban vehicle miles traveled are on signal-controlled roadways, significant research efforts are needed to investigate intersection-related teenage driver injury severities and their contributing factors in terms of driver behavior, vehicle-infrastructure interactions, environmental characteristics, roadway geometric features, and traffic compositions. Therefore, this study aims to explore the characteristic differences between teenage and adult drivers in intersection-related crashes, identify the significant contributing attributes, and analyze their impacts on driver injury severities. Using crash data collected in New Mexico from 2010 to 2011, 2 multinomial logit regression models were developed to analyze injury severities for teenage and adult drivers, respectively. Elasticity analyses and transferability tests were conducted to better understand the quantitative impacts of these factors and the teenage driver injury severity model's generality. The results showed that although many of the same contributing factors were found to be significant in the both teenage and adult driver models, certain different attributes must be distinguished to specifically develop effective safety solutions for the 2 driver groups. The research findings are helpful to better understand teenage crash uniqueness and develop cost-effective solutions to reduce intersection-related teenage injury severities and facilitate driver injury mitigation research.

Socio-economic analysis of fatal crash trends : final report.

DOT National Transportation Integrated Search

2005-12-01

This report describes the analysis of fatal crash patterns and explores the impact of socioeconomic factors and safety regulations on statewide crash rates. This analysis separated statewide crash rates between 2002 and 2004 into two samples, 1) thos...

CID Aircraft post-impact lakebed skid

NASA Technical Reports Server (NTRS)

1984-01-01

Moments after hitting and sliding through the wing openers the aircraft burst into flame, with a spectacular fireball seen emanating from the right inboard engine area. In a typical aircraft crash, fuel spilled from ruptured fuel tanks forms a fine mist that can be ignited by a number of sources at the crash site. In 1984 the NASA Dryden Flight Research Facility (after 1994 a full-fledged Center again) and the Federal Aviation Administration (FAA) teamed-up in a unique flight experiment called the Controlled Impact Demonstration (CID), to test crash a Boeing 720 aircraft using standard fuel with an additive designed to supress fire. The additive, FM-9, a high-molecular-weight long-chain polymer, when blended with Jet-A fuel had demonstrated the capability to inhibit ignition and flame propagation of the released fuel in simulated crash tests. This anti-misting kerosene (AMK) cannot be introduced directly into a gas turbine engine due to several possible problems such as clogging of filters. The AMK must be restored to almost Jet-A before being introduced into the engine for burning. This restoration is called 'degradation' and was accomplished on the B-720 using a device called a 'degrader.' Each of the four Pratt & Whitney JT3C-7 engines had a 'degrader' built and installed by General Electric (GE) to break down and return the AMK to near Jet-A quality. In addition to the AMK research the NASA Langley Research Center was involved in a structural loads measurement experiment, which included having instrumented dummies filling the seats in the passenger compartment. Before the final flight on December 1, 1984, more than four years of effort passed trying to set-up final impact conditions considered survivable by the FAA. During those years while 14 flights with crews were flown the following major efforts were underway: NASA Dryden developed the remote piloting techniques necessary for the B-720 to fly as a drone aircraft; General Electric installed and tested four degraders (one on each engine); and the FAA refined AMK (blending, testing, and fueling a full-size aircraft). The 15 flights had 15 takeoffs, 14 landings and a larger number of approaches to about 150 feet above the prepared crash site under remote control. These flight were used to introduce AMK one step at a time into some of the fuel tanks and engines while monitoring the performance of the engines. On the final flight (No. 15) with no crew, all fuel tanks were filled with a total of 76,000 pounds of AMK and the remotely-piloted aircraft landed on Rogers Dry Lakebed in an area prepared with posts to test the effectiveness of the AMK in a controlled impact. The CID, which some wags called the Crash in the Desert, was spectacular with a large fireball enveloping and burning the B-720 aircraft. From the standpoint of AMK the test was a major set-back, but for NASA Langley, the data collected on crashworthiness was deemed successful and just as important.

Testing of small and large sign support systems FOIL test numbers : 92F009 and 92F010

DOT National Transportation Integrated Search

1994-07-01

This test report contains the results of two crash tests performed at the Federal Outdoor Impact Laboratory (FOIL) in McLean, Virginia. The/tests were performed on a small sign support system at 20 rni/h (8.9 m/s), test 92F009 and 60 mi/h (26.8 m/s),...

Testing of small and large sign support systems FOIL test numbers : 92F024 and 92F025

DOT National Transportation Integrated Search

1994-07-01

This test report contains the results of two crash tests performed at the Federal Outdoor Impact Laboratory (FOIL) in McLean, Virginia. The tests were performed on a small sign support system at 20 mi/h (8.9 m/s), test 92F024, and 60 mi/h (26.8 m/s),...

Study concerning the loads over driver's chests in car crashes with cars of the same or different generation

NASA Astrophysics Data System (ADS)

Ispas, N.; Năstăsoiu, M.

2016-08-01

Reducing occupant injuries for cars involves in traffic accidents is a main target of today cars designers. Known as active or passive safety, many technological solutions were developing over the time for an actual better car's occupant safety. In the real world, in traffic accidents are often involved cars from different generations with various safety historical solutions. The main aim of these papers are to quantify the influences over the car driver chest loads in cases of same or different generation of cars involved in side car crashes. Both same and different cars generations were used for the study. Other goal of the paper was the study of in time loads conformity for diver's chests from both cars involved in crash. The paper's experimental results were obtained by support of DSD, Dr. Steffan Datentechnik GmbH - Linz, Austria. The described tests were performed in full test facility of DSD Linz, in “Easter 2015 PC-Crash Seminar”. In all crashes we obtaining results from both dummy placed in impacted and hits car. The novelty of the paper are the comparisons of data set from each of driver (dummy) of two cars involved in each of six experimental crashes. Another novelty of this paper consists in possibilities to analyse the influences of structural historical cars solutions over deformation and loads in cases of traffic accidents involved. Paper's conclusions can be future used for car passive safety improvement.

Single passenger rail car impact test. Volume 2 : summary of occupant protection program : rail passenger equipment collision tests

DOT National Transportation Integrated Search

2000-03-01

A test in which a single rail passenger car was crashed into a fixed wall at 35 mph was conducted at the Transportation Technology Center on November 16, 1999. The car was instrumented to measure (1) the deformations of critical structural elements, ...

Accelerations and Passenger Harness Loads Measured in Full-Scale Light-Airplane Crashes

NASA Technical Reports Server (NTRS)

Eiband, A. Martin; Simpkinson, Scott H.; Black, Dugald O.

1953-01-01

Full-scale light-airplane crashes simulating stall-spin accidents were conducted to determine the decelerations to which occupants are exposed and the resulting harness forces encountered in this type of accident. Crashes at impact speeds from 42 to 60 miles per hour were studied. The airplanes used were of the familiar steel-tube, fabric-covered, tandem, two-seat type. In crashes up to an impact speed of 60 miles per hour, crumpling of the forward fuselage structure prevented the maximum deceleration at the rear-seat location from exceeding 26 to 33g. This maximum g value appeared independent of the impact speed. Restraining forces in the seatbelt - shoulder-harness combination reached 5800 pounds. The rear-seat occupant can survive crashes of the type studied at impact speeds up to 60 miles per hour, if body movement is restrained by an adequate seatbelt-shoulder-harness combination so as to prevent injurious contact with obstacles normally present in the cabin. Inwardly collapsing cabin structure, however, is a potential hazard in the higher-speed crashes.

Spatial panel analyses of alcohol outlets and motor vehicle crashes in California: 1999–2008

PubMed Central

Ponicki, William R.; Gruenewald, Paul J.; Remer, Lillian G.

2014-01-01

Although past research has linked alcohol outlet density to higher rates of drinking and many related social problems, there is conflicting evidence of density’s association with traffic crashes. An abundance of local alcohol outlets simultaneously encourages drinking and reduces driving distances required to obtain alcohol, leading to an indeterminate expected impact on alcohol-involved crash risk. This study separately investigates the effects of outlet density on (1) the risk of injury crashes relative to population and (2) the likelihood that any given crash is alcohol-involved, as indicated by police reports and single-vehicle nighttime status of crashes. Alcohol outlet density effects are estimated using Bayesian misalignment Poisson analyses of all California ZIP codes over the years 1999–2008. These misalignment models allow panel analysis of ZIP-code data despite frequent redefinition of postal-code boundaries, while also controlling for overdispersion and the effects of spatial autocorrelation. Because models control for overall retail density, estimated alcohol-outlet associations represent the extra effect of retail establishments selling alcohol. The results indicate a number of statistically well-supported associations between retail density and crash behavior, but the implied effects on crash risks are relatively small. Alcohol-serving restaurants have a greater impact on overall crash risks than on the likelihood that those crashes involve alcohol, whereas bars primarily affect the odds that crashes are alcohol-involved. Off-premise outlet density is negatively associated with risks of both crashes and alcohol involvement, while the presence of a tribal casino in a ZIP code is linked to higher odds of police-reported drinking involvement. Alcohol outlets in a given area are found to influence crash risks both locally and in adjacent ZIP codes, and significant spatial autocorrelation also suggests important relationships across geographical units. These results suggest that each type of alcohol outlet can have differing impacts on risks of crashing as well as the alcohol involvement of those crashes. PMID:23537623

49 CFR Appendix A to Subpart U of... - Figures

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 7 2011-10-01 2011-10-01 false Figures A Appendix A to Subpart U of Part 572 Transportation Other Regulations Relating to Transportation (Continued) NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) ANTHROPOMORPHIC TEST DEVICES 2re Side Impact Crash Test...

49 CFR Appendix A to Subpart U of... - Figures

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 7 2010-10-01 2010-10-01 false Figures A Appendix A to Subpart U of Part 572 Transportation Other Regulations Relating to Transportation (Continued) NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) ANTHROPOMORPHIC TEST DEVICES 2re Side Impact Crash Test...

49 CFR Appendix A to Subpart U of... - Figures

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 7 2012-10-01 2012-10-01 false Figures A Appendix A to Subpart U of Part 572 Transportation Other Regulations Relating to Transportation (Continued) NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) ANTHROPOMORPHIC TEST DEVICES 2re Side Impact Crash Test...

MASH test 3-11 of the TxDOT T222 bridge rail.

DOT National Transportation Integrated Search

2016-07-01

The objective of this research was to evaluate the impact performance of the TxDOT Type T222 : Bridge Rail according to the Manual for Assessing Safety Hardware (MASH) TL-3. The crash testing was : performed in accordance with the requirements of MAS...

Evaluation of the Scottsdale Loop 101 automated speed enforcement demonstration program.

PubMed

Shin, Kangwon; Washington, Simon P; van Schalkwyk, Ida

2009-05-01

Speeding is recognized as a major contributing factor in traffic crashes. In order to reduce speed-related crashes, the city of Scottsdale, Arizona implemented the first fixed-camera photo speed enforcement program (SEP) on a limited access freeway in the US. The 9-month demonstration program spanning from January 2006 to October 2006 was implemented on a 6.5 mile urban freeway segment of Arizona State Route 101 running through Scottsdale. This paper presents the results of a comprehensive analysis of the impact of the SEP on speeding behavior, crashes, and the economic impact of crashes. The impact on speeding behavior was estimated using generalized least square estimation, in which the observed speeds and the speeding frequencies during the program period were compared to those during other periods. The impact of the SEP on crashes was estimated using 3 evaluation methods: a before-and-after (BA) analysis using a comparison group, a BA analysis with traffic flow correction, and an empirical Bayes BA analysis with time-variant safety. The analysis results reveal that speeding detection frequencies (speeds> or =76 mph) increased by a factor of 10.5 after the SEP was (temporarily) terminated. Average speeds in the enforcement zone were reduced by about 9 mph when the SEP was implemented, after accounting for the influence of traffic flow. All crash types were reduced except rear-end crashes, although the estimated magnitude of impact varies across estimation methods (and their corresponding assumptions). When considering Arizona-specific crash related injury costs, the SEP is estimated to yield about $17 million in annual safety benefits.

Development of a frontal small overlap crashworthiness evaluation test.

PubMed

Sherwood, Christopher P; Mueller, Becky C; Nolan, Joseph M; Zuby, David S; Lund, Adrian K

2013-01-01

Small overlap frontal crashes are those in which crash forces are applied outboard of the vehicle's longitudinal frame rails. In-depth analyses of crashes indicate that such crashes account for a significant proportion of frontal crashes with seriously injured occupants. The objective of this research was to evaluate possible barrier crash tests that could be used to evaluate the crashworthiness of vehicles across a spectrum of small overlap crash types. Sixteen full-scale vehicle tests were conducted using 3 midsize passenger vehicles in up to 6 different test configurations, including vehicle-to-vehicle and barrier tests. All vehicles were tested at 64 km/h with an instrumented Hybrid III midsize male driver dummy. All test configurations resulted in primary loading of the wheel, suspension system, and hinge pillar. Vehicles underwent substantial lateral movement during the crash, which varied by crash configuration. The occupant compartments had significant intrusion, particularly to the most outboard structures. Inboard movement of the steering wheel in combination with outboard movement of the dummies (due to the lateral vehicle motion) caused limited interaction with the frontal air bag in most cases. When assessing overall crashworthiness (based on injury measures, structural deformation, and occupant kinematics), one vehicle had superior performance in each crash configuration. This was confirmation that the countermeasures benefiting performance in a single small overlap test also will provide a benefit in other crash configurations. Based on these test results, the Insurance Institute for Highway Safety has developed a small overlap crashworthiness evaluation with the following characteristics: a rigid flat barrier with a 150-mm corner radius, 25 percent overlap, 64 km/h test speed, and a Hybrid III midsize male driver dummy.

Identifying crash-prone traffic conditions under different weather on freeways.

PubMed

Xu, Chengcheng; Wang, Wei; Liu, Pan

2013-09-01

Understanding the relationships between traffic flow characteristics and crash risk under adverse weather conditions will help highway agencies develop proactive safety management strategies to improve traffic safety in adverse weather conditions. The primary objective is to develop separate crash risk prediction models for different weather conditions. The crash data, weather data, and traffic data used in this study were collected on the I-880N freeway in California in 2008 and 2010. This study considered three different weather conditions: clear weather, rainy weather, and reduced visibility weather. The preliminary analysis showed that there was some heterogeneity in the risk estimates for traffic flow characteristics by weather conditions, and that the crash risk prediction model for all weather conditions cannot capture the impacts of the traffic flow variables on crash risk under adverse weather conditions. The Bayesian random intercept logistic regression models were applied to link the likelihood of crash occurrence with various traffic flow characteristics under different weather conditions. The crash risk prediction models were compared to their corresponding logistic regression model. It was found that the random intercept model improved the goodness-of-fit of the crash risk prediction models. The model estimation results showed that the traffic flow characteristics contributing to crash risk were different across different weather conditions. The speed difference between upstream and downstream stations was found to be significant in each crash risk prediction model. Speed difference between upstream and downstream stations had the largest impact on crash risk in reduced visibility weather, followed by that in rainy weather. The ROC curves were further developed to evaluate the predictive performance of the crash risk prediction models under different weather conditions. The predictive performance of the crash risk model for clear weather was better than those of the crash risk models for adverse weather conditions. The research results could promote a better understanding of the impacts of traffic flow characteristics on crash risk under adverse weather conditions, which will help transportation professionals to develop better crash prevention strategies in adverse weather. Copyright © 2013 National Safety Council and Elsevier Ltd. All rights reserved.

Objective tests for forward looking pedestrian crash avoidance/mitigation systems.

DOT National Transportation Integrated Search

2014-06-01

This report documents the work completed by the Crash Avoidance Metrics Partnership (CAMP) Crash Imminent Braking : (CIB) Consortium during the project titled Objective Tests for Forward Looking Pedestrian Crash Avoidance/Mitigation : Systems. ...

Injury risk functions for frontal oblique collisions.

PubMed

Andricevic, Nino; Junge, Mirko; Krampe, Jonas

2018-03-09

The objective of this article was the construction of injury risk functions (IRFs) for front row occupants in oblique frontal crashes and a comparison to IRF of nonoblique frontal crashes from the same data set. Crashes of modern vehicles from GIDAS (German In-Depth Accident Study) were used as the basis for the construction of a logistic injury risk model. Static deformation, measured via displaced voxels on the postcrash vehicles, was used to calculate the energy dissipated in the crash. This measure of accident severity was termed objective equivalent speed (oEES) because it does not depend on the accident reconstruction and thus eliminates reconstruction biases like impact direction and vehicle model year. Imputation from property damage cases was used to describe underrepresented low-severity crashes-a known shortcoming of GIDAS. Binary logistic regression was used to relate the stimuli (oEES) to the binary outcome variable (injured or not injured). IRFs for the oblique frontal impact and nonoblique frontal impact were computed for the Maximum Abbreviated Injury Scale (MAIS) 2+ and 3+ levels for adults (18-64 years). For a given stimulus, the probability of injury for a belted driver was higher in oblique crashes than in nonoblique frontal crashes. For the 25% injury risk at MAIS 2+ level, the corresponding stimulus for oblique crashes was 40 km/h but it was 64 km/h for nonoblique frontal crashes. The risk of obtaining MAIS 2+ injuries is significantly higher in oblique crashes than in nonoblique crashes. In the real world, most MAIS 2+ injuries occur in an oEES range from 30 to 60 km/h.

Crash-test dummy and pendulum impact tests of ice hockey boards: greater displacement does not reduce impact

PubMed Central

Schmitt, Kai-Uwe; Muser, Markus H; Thueler, Hansjuerg; Bruegger, Othmar

2018-01-01

Background One injury mechanism in ice hockey is impact with the boards. We investigated whether more flexible hockey boards would provide less biomechanical loading on impact than did existing (reference) boards. Methods We conducted impact tests with a dynamic pendulum (mass 60 kg) and with crash test dummies (ES-2 dummy, 4.76 m/s impact speed). Outcomes were biomechanical loading experienced by a player in terms of head acceleration, impact force to the shoulder, spine, abdomen and pelvis as well as compression of the thorax. Results The more flexible board designs featured substantial displacement at impact. Some so-called flexible boards were displaced four times more than the reference board. The new boards possessed less stiffness and up to 90 kg less effective mass, reducing the portion of the board mass a player experienced on impact, compared with boards with a conventional design. Flexible boards resulted in a similar or reduced loading for all body regions, apart from the shoulder. The displacement of a board system did not correlate directly with the biomechanical loading. Conclusions Flexible board systems can reduce the loading of a player on impact. However, we found no correlation between the displacement and the biomechanical loading; accordingly, displacement alone was insufficient to characterise the overall loading of a player and thus the risk of injury associated with board impact. Ideally, the performance of boards is assessed on the basis of parameters that show a good correlation to injury risk. PMID:29084724

Quasi-Uniform High Speed Foam Crush Testing Using a Guided Drop Mass Impact

NASA Technical Reports Server (NTRS)

Jones, Lisa E. (Technical Monitor); Kellas, Sotiris

2004-01-01

A relatively simple method for measuring the dynamic crush response of foam materials at various loading rates is described. The method utilizes a drop mass impact configuration with mass and impact velocity selected such that the crush speed remains approximately uniform during the entire sample crushing event. Instrumentation, data acquisition, and data processing techniques are presented, and limitations of the test method are discussed. The objective of the test method is to produce input data for dynamic finite element modeling involving crash and energy absorption characteristics of foam materials.

The Development of Two Composite Energy Absorbers for Use in a Transport Rotorcraft Airframe Crash Testbed (TRACT 2) Full-Scale Crash Test

NASA Technical Reports Server (NTRS)

Littell, Justin D.; Jackson, Karen E.; Annett, Martin S.; Seal, Michael D.; Fasanella, Edwin L.

2015-01-01

Two composite energy absorbers were developed and evaluated at NASA Langley Research Center through multi-level testing and simulation performed under the Transport Rotorcraft Airframe Crash Testbed (TRACT) research program. A conical-shaped energy absorber, designated the conusoid, was evaluated that consisted of four layers of hybrid carbon-Kevlar plain weave fabric oriented at [+45deg/-45deg/-45deg/+45deg] with respect to the vertical direction. A sinusoidal-shaped energy absorber, designated the sinusoid, was developed that consisted of hybrid carbon-Kevlar plain weave fabric face sheets, two layers for each face sheet oriented at +/-45deg with respect to the vertical direction, and a closed-cell ELFOAM P200 polyisocyanurate (2.0-lb/cu ft) foam core. The design goal for the energy absorbers was to achieve average floor-level accelerations of between 25- and 40-g during the full-scale crash test of a retrofitted CH-46E helicopter airframe, designated TRACT 2. Variations in both designs were assessed through dynamic crush testing of component specimens. Once the designs were finalized, subfloor beams of each configuration were fabricated and retrofitted into a barrel section of a CH-46E helicopter. A vertical drop test of the barrel section was conducted onto concrete to evaluate the performance of the energy absorbers prior to retrofit into TRACT 2. The retrofitted airframe was crash tested under combined forward and vertical velocity conditions onto soft soil. Finite element models were developed of all test articles and simulations were performed using LS-DYNA, a commercial nonlinear explicit transient dynamic finite element code. Test-analysis results are presented for each energy absorber as comparisons of time-history responses, as well as predicted and experimental structural deformations and progressive damage under impact loading for each evaluation level.

Mechanisms and factors involved in hip injuries during frontal crashes.

PubMed

Yoganandan, N; Pintar, F A; Gennarelli, T A; Maltese, M R; Eppinger, R H

2001-11-01

This study was conducted to collect data and gain insights relative to the mechanisms and factors involved in hip injuries during frontal crashes and to study the tolerance of hip injuries from this type of loading. Unembalmed human cadavers were seated on a standard automotive seat (reinforced) and subjected to knee impact test to each lower extremity. Varying combinations of flexion and adduction/abduction were used for initial alignment conditions and pre-positioning. Accelerometers were fixed to the iliac wings and twelfth thoracic vertebral spinous process. A 23.4-kg padded pendulum impacted the knee at velocities ranging from 4.3 to 7.6 m/s. The impacting direction was along the anteroposterior axis, i.e., the global X-axis, in the body-fixed coordinate system. A load cell on the front of the pendulum recorded the impact force. Peak impact forces ranged from 2,450 to 10,950 N. The rate of loading ranged from 123 to 7,664 N/msec. The impulse values ranged from 12.4 to 31.9 Nsec. Injuries were not apparent in three tests. Eight tests resulted in trauma. Fractures involving the pelvis including the acetabulum and proximal femur occurred in five out of the eight tests, and distal femoral bone fracture occurred in one test. These results underscore the importance of leg pre-positioning and the orientation of the impacting axis to produce specific types of trauma to the pelvic region of the lower extremity.

The impact of alcohol and road traffic policies on crash rates in Botswana, 2004-2011: a time-series analysis.

PubMed

Sebego, Miriam; Naumann, Rebecca B; Rudd, Rose A; Voetsch, Karen; Dellinger, Ann M; Ndlovu, Christopher

2014-09-01

In Botswana, increased development and motorization have brought increased road traffic-related death rates. Between 1981 and 2001, the road traffic-related death rate in Botswana more than tripled. The country has taken several steps over the last several years to address the growing burden of road traffic crashes and particularly to address the burden of alcohol-related crashes. This study examines the impact of the implementation of alcohol and road safety-related policies on crash rates, including overall crash rates, fatal crash rates, and single-vehicle nighttime fatal (SVNF) crash rates, in Botswana from 2004 to 2011. The overall crash rate declined significantly in June 2009 and June 2010, such that the overall crash rate from June 2010 to December 2011 was 22% lower than the overall crash rate from January 2004 to May 2009. Additionally, there were significant declines in average fatal crash and SVNF crash rates in early 2010. Botswana's recent crash rate reductions occurred during a time when aggressive policies and other activities (e.g., education, enforcement) were implemented to reduce alcohol consumption and improve road safety. While it is unclear which of the policies or activities contributed to these declines and to what extent, these reductions are likely the result of several, combined efforts. Copyright © 2014 Elsevier Ltd. All rights reserved.

Comparing countermeasures for mitigating wrong-way entries onto limited access facilities.

DOT National Transportation Integrated Search

2017-03-01

Wrong-way crashes are a major cause for safety concerns along freeways and limited-access facilities. Although wrong-way crashes account for a relatively small portion of total crashes, the impact between two cars crashing into each other at high spe...

CID-720 aircraft Langley Research Center preflight hardware tests: Development, flight acceptance and qualification

NASA Technical Reports Server (NTRS)

Pride, J. D.

1986-01-01

The testing conducted on LaRC-developed hardware for the controlled impact demonstration transport aircraft is discussed. To properly develop flight qualified crash systems, two environments were considered: the aircraft flight environment with the focus on vibration and temperature effects, and the crash environment with the long pulse shock effects. Also with the large quantity of fuel in the wing tanks the possibility of fire was considered to be a threat to data retrieval and thus fire tests were included in the development test process. The aircraft test successfully demonstrated the performance of the LaRC developed heat shields. Good telemetered data (S-band) was received during the impact and slide-out phase, and even after the aircraft came to rest. The two onboard DAS tape recorders were protected from the intense fire and high quality tape data was recovered. The complete photographic system performed as planned throughout the 40.0 sec of film supply. The four photo power distribution pallets remained in good condition and all ten onboard 16 mm high speed (400 frames/sec) cameras produced good film data.

Injury analysis of patients according to impact patterns involved in pedestrian traffic crashes.

PubMed

Lee, Hee Young; Youk, Hyun; Ii Lee, Jeong; Kang, Chan Young; Kong, Joon Seok; Sung, Sil; Kang, In Hye; Lee, Jung Hun; Kim, Oh Hyun; Jung, Woo Jin; Lee, Kang Hyun; Youn, Young Han; Park, Jong Chan

2018-02-28

In cases of car-to-person pedestrian traffic crashes (PTCs), the principal issue is determining at what point the car collided with the pedestrian. Accordingly, the objective of the present study was to use the medical records of patients injured in PTCs to investigate the characteristics of crash types and the areas and injury severity and to determine whether there are differences in injuries due to the angle, motion, and position at the point of impact. The present study examined 231 PTC patients admitted to the emergency room (ER) between January and December 2014. Electronic medical records from the hospital were used to divide the patient data according to Abbreviated Injury Scale (AIS) codes for injured areas based on sex, age, time of the crash, outcomes after ER treatment, and major symptoms. Among 231 patients, police reports on 67 crash cases, involving 70 people, were obtained with the help of local police departments, and these reports were used to reconstruct details of the actual crash. For statistical analysis, a chi-square test and a one-way analysis of variance calculation were used to compare the Injury Severity Score (ISS) based on groups and stages, with a statistical significance level set to P < .05. With respect to patients who were admitted for PTC, 52.4% were females and 47.6% were males. The frequency of crashes was high in middle-aged and elderly groups, as well as for youths between 10 and 19 years old. With respect to outcomes after ER treatment, discharge to home after symptom improvement was the most common outcome (24.6%). Admissions to the intensive care unit (25.1%) and to the general ward (23.8%) were also high. In terms of major symptoms, the most common injuries were to the head, resulting from a rotatory motion post impact (35.9%), and injuries to the legs, resulting from the impact of a direct collision with an object (25.1%). This study demonstrated that injuries to the chest and abdomen were the most severe in the fender vault group and head and neck injuries were the most severe in the roof vault group. In particular, the Injury Severity Score was highest in the roof vault group.

Thoracic aortic injury in motor vehicle crashes: the effect of impact direction, side of body struck, and seat belt use.

PubMed

Fitzharris, Michael; Franklyn, Melanie; Frampton, Richard; Yang, King; Morris, Andrew; Fildes, Brian

2004-09-01

Using in-depth, real-world motor vehicle crash data from the United States and the United Kingdom, we aimed to assess the incidence and risk factors associated with thoracic aorta injuries. De-identified National Automotive Sampling System Crashworthiness Data System (U.S.) and Co-operative Crash Injury Study (U.K.) data formed the basis of this retrospective analysis. Logistic regression was used to assess the level of risk of thoracic aorta injury associated with impact direction, seat belt use and, given the asymmetry of the thoracic cavity, whether being struck toward the left side of the body was associated with increased risk in side-impact crashes. A total of 13,436 U.S. and 3,756 U.K. drivers and front seat passengers were analyzed. The incidence of thoracic aorta injury in the U.S. and U.K. samples was 1.5% (n = 197) and 1.9% (n = 70), respectively. The risk was higher for occupants seated on the side closest to the impact than for occupants involved in frontal impact crashes. This was the case irrespective of whether the force was applied toward the left (belted: relative risk [RR], 4.6; 95% confidence interval [CI], 2.9-7.1; p < 0.001) or the right side (belted: RR, 2.6; 95% CI, 1.4-5.1; p < 0.004) of the occupant's body. For occupants involved in side-impact crashes, there was no difference in the risk of thoracic aorta injury whether the impacting force was applied toward the left or toward the right side of the occupant's body. Seat belt use provided a protective benefit such that the risk of thoracic aorta injury among unbelted occupants was three times higher than among belted occupants (RR, 3.0; 95% CI, 2.2-4.3; p < 0.001); however, the benefit varied across impact direction. Thoracic aorta injuries were found to be associated with high impact severity, and being struck by a sports utility vehicle relative to a passenger vehicle (RR, 1.7; 95% CI, 1.2-2.3; p = 0.001). Aortic injuries have been conventionally associated with frontal impacts. However, emergency clinicians should be aware that occupants of side-impact crashes are at greater risk, particularly if the occupant was unbelted and involved in a crash of high impact severity.

The real-world safety potential of connected vehicle technology.

PubMed

Doecke, Sam; Grant, Alex; Anderson, Robert W G

2015-01-01

This article estimates the safety potential of a current commercially available connected vehicle technology in real-world crashes. Data from the Centre for Automotive Safety Research's at-scene in-depth crash investigations in South Australia were used to simulate the circumstances of real-world crashes. A total of 89 crashes were selected for inclusion in the study. The crashes were selected as representative of the most prevalent crash types for injury or fatal crashes and had potential to be mitigated by connected vehicle technology. The trajectory, speeds, braking, and impact configuration of the selected in-depth cases were replicated in a software package and converted to a file format allowing "replay" of the scenario in real time as input to 2 Cohda Wireless MK2 onboard units. The Cohda Wireless onboard units are a mature connected vehicle technology that has been used in both the German simTD field trial and the U.S. Department of Transport's Safety Pilot project and have been tuned for low false alarm rates when used in the real world. The crash replay was achieved by replacing each of the onboard unit Global Positioning System (GPS) inputs with the simulated data of each of the involved vehicles. The time at which the Cohda Wireless threat detection software issued an elevated warning was used to calculate a new impact speed using 3 different reaction scenarios and 2 levels of braking. It was found that between 37 and 86% of the simulated crashes could be avoided, with highest percentage due a fully autonomous system braking at 0.7 g. The same system also reduced the impact speed relative to the actual crash in all cases. Even when a human reaction time of 1.2 s and moderate braking of 0.4 g was assumed, the impact speed was reduced in 78% of the crashes. Crash types that proved difficult for the threat detection engine were head-on crashes where the approach angle was low and right turn-opposite crashes. These results indicate that connected vehicle technology can be greatly beneficial in real-world crash scenarios and that this benefit would be maximized by having the vehicle intervene autonomously with heavy braking. The crash types that proved difficult for the connected vehicle technology could be better addressed if controller area network (CAN) information is available, such as steering wheel angle, so that driver intent can be inferred sooner. More accurate positioning in the real world (e.g., combining satellite positioning and accelerometer data) would allow the technology to be more effective for near-collinear head-on and rear-end crashes, because the low approach angles that are common in such crashes are currently ignored in order to minimize false alarms due to positioning uncertainty.

Thoracolumbar spine fractures in frontal impact crashes.

PubMed

Pintar, Frank A; Yoganandan, Narayan; Maiman, Dennis J; Scarboro, Mark; Rudd, Rodney W

2012-01-01

There is currently no injury assessment for thoracic or lumbar spine fractures in the motor vehicle crash standards throughout the world. Compression-related thoracolumbar fractures are occurring in frontal impacts and yet the mechanism of injury is poorly understood. The objective of this investigation was to characterize these injuries using real world crash data from the US-DOT-NHTSA NASS-CDS and CIREN databases. Thoracic and lumbar AIS vertebral body fracture codes were searched for in the two databases. The NASS database was used to characterize population trends as a function of crash year and vehicle model year. The CIREN database was used to examine a case series in more detail. From the NASS database there were 2000-4000 occupants in frontal impacts with thoracic and lumbar vertebral body fractures per crash year. There was an increasing trend in incidence rate of thoracolumbar fractures in frontal impact crashes as a function of vehicle model year from 1986 to 2008; this was not the case for other crash types. From the CIREN database, the thoracolumbar spine was most commonly fractured at either the T12 or L1 level. Major, burst type fractures occurred predominantly at T12, L1 or L5; wedge fractures were most common at L1. Most CIREN occupants were belted; there were slightly more females involved; they were almost all in bucket seats; impact location occurred approximately half the time on the road and half off the road. The type of object struck also seemed to have some influence on fractured spine level, suggesting that the crash deceleration pulse may be influential in the type of compression vector that migrates up the spinal column. Future biomechanical studies are required to define mechanistically how these fractures are influenced by these many factors.

Perception and Biodynamics in Unalerted Precrash Response

PubMed Central

McGehee, Daniel V.; Carsten, Oliver M.J.

2010-01-01

This research seeks to better understand unalerted driver response just prior to a serious vehicle crash. Few studies have been able to view a crash from the inside—with a camera focused on the driver and occupants. Four studies are examined: 1) a high-fidelity simulator study with an unalerted intersection incursion crash among 107 drivers; 2) four crashes from the Virginia Tech Transportation Institute (VTTI) 100 car study; 3) 58 crashes from vehicles equipped with an event triggered video recorder; and 4) a custom-designed high-fidelity simulator experiment that examined unalerted driver response to a head-on crash with a heavy truck. Analyses concentrate on decomposing driver perception, action, facial and postural changes with a focus on describing the neurophysiologic mechanisms designed to respond to danger. Results indicate that drivers involved in severe crashes generally have preview that an impact is about to occur. They respond first with vehicle control inputs (accelerator pedal release) along with facial state changes and withdrawal of the head back towards the head restraint. These responses frequently occur almost simultaneously, providing safety system designers with a number of reliable driver performance measures to monitor. Understanding such mechanisms may assist future advanced driver assistance systems (ADAS), advanced restraints, model development of advanced anthropomorphic test dummies (ATDs), injury prediction and the integration of active and passive safety systems. PMID:21050614

Effect of speed limit increase on crash rate on rural two-lane highways in Louisiana.

DOT National Transportation Integrated Search

2006-08-01

This study investigated the impact of a speed limit increase on the crash rate on rural twolane roads in Louisiana. The Louisiana crash database for 1999-2004 was used to compare rates of different crash severities and types before and after a speed ...

Investigating the Impact of Lack of Motorcycle Annual Average Daily Traffic Data in Crash Modeling and the Estimation of Crash Modification Factors

DOT National Transportation Integrated Search

2016-10-01

The development of safety performance functions (SPFs) and crash modification factors (CMFs) requires data on traffic exposure. The analysis of motorcycle crashes can be especially challenging in this regard because few jurisdictions collect motorcyc...

Development of a human body finite element model with multiple muscles and their controller for estimating occupant motions and impact responses in frontal crash situations.

PubMed

Iwamoto, Masami; Nakahira, Yuko; Kimpara, Hideyuki; Sugiyama, Takahiko; Min, Kyuengbo

2012-10-01

A few reports suggest differences in injury outcomes between cadaver tests and real-world accidents under almost similar conditions. This study hypothesized that muscle activity could primarily cause the differences, and then developed a human body finite element (FE) model with individual muscles. Each muscle was modeled as a hybrid model of bar elements with active properties and solid elements with passive properties. The model without muscle activation was firstly validated against five series of cadaver test data on impact responses in the anterior-posterior direction. The model with muscle activation levels estimated based on electromyography (EMG) data was secondly validated against four series of volunteer test data on bracing effects for stiffness and thickness of an upper arm muscle, and braced driver's responses under a static environment and a brake deceleration. A muscle controller using reinforcement learning (RL), which is a mathematical model of learning process in the basal ganglia associated with human postural controls, were newly proposed to estimate muscle activity in various occupant conditions including inattentive and attentive conditions. Control of individual muscles predicted by RL reproduced more human like head-neck motions than conventional control of two groups of agonist and antagonist muscles. The model and the controller demonstrated that head-neck motions of an occupant under an impact deceleration of frontal crash were different in between a bracing condition with maximal braking force and an occupant condition predicted by RL. The model and the controller have the potential to investigate muscular effects in various occupant conditions during frontal crashes.

Potential benefits of underride guards in large truck side crashes.

PubMed

Brumbelow, Matthew L

2012-01-01

To evaluate the maximum potential for side underride guards (SUGs) to reduce passenger vehicle occupant fatalities and injuries in crashes with large trucks in the United States. Examination of the Large Truck Crash Causation Study (LTCCS) identified 206 crash events involving a passenger vehicle impact with the side of a large truck. Each case was evaluated to determine whether the most severe injury sustained by a passenger vehicle occupant was a result of the impact with the side of the truck and whether an SUG could have reduced the injury severity. Data from the 2006-2008 Fatality Analysis Reporting System (FARS) and Trucks Involved in Fatal Accidents (TIFA) survey were used to compare the types of trucks involved in all fatal side impacts with passenger vehicles with the truck types in the LTCCS cases that were studied. FARS and TIFA data also were used to estimate the total annual number of passenger vehicle occupants killed in truck side impacts. In 143 of the 206 cases, the truck side impact produced the most severe injury sustained by a passenger vehicle occupant. In the other cases, no passenger vehicle occupant was injured or the most severe injury was due to an event preceding or following the truck side impact. Forty-nine of these occupants sustained injuries coded as level 3 or higher on the abbreviated injury scale (AIS) or were killed. SUGs could have reduced injury severity in 76 of the 143 cases, including 38 of the 49 cases with an AIS ≥ 3 coded injury or fatality. Semi-trailers were the most common type of impacted truck unit, both overall and when considering only cases where an SUG could have mitigated injury severity. Crashes where the front of the passenger vehicle struck the side of the semi-trailer perpendicularly or obliquely from the oncoming direction were less common overall than side-to-side and oblique/same direction crashes but more often produced an AIS ≥ 3 injury or fatality. The distribution of truck types in the LTCCS sample was similar to that in the FARS and TIFA data. Overall, around 1600 passenger vehicle occupants were killed in 2-vehicle truck side impact crashes during 2006-2008, or 22 percent of all passenger vehicle occupants who died in 2-vehicle crashes with large trucks. Structural incompatibility was a common factor in LTCCS crashes between passenger vehicles and the sides of large trucks. SUGs could have reduced injury risk in around three fourths of the crashes that produced an AIS ≥ 3 injury or fatality. Most of these crashes involved semi-trailers. However, the necessary strength and location of these SUGs present technical challenges that need to be addressed.

Examining the impact of opioid analgesics on crash responsibility in truck drivers involved in fatal crashes.

PubMed

Reguly, Paula; Dubois, Sacha; Bédard, Michel

2014-01-01

Commercial motor vehicle (CMV) drivers, particularly drivers of large trucks continue to be a population of concern regarding traffic safety despite the reduction in large truck crash rates over the past decade. Medication and drug use while driving is one important risk factor for large truck crashes. Work-related exposures, such as vibration, manual handling and poor ergonomics contribute to an increased risk for injuries and chronic conditions and are common reasons for opioid analgesic (OA) use by CMV truck drivers. The objectives of this study were to examine the role of OA use in CMV truck drivers involved in fatal crashes by: (a) generating prevalence estimates of OA use; (b) documenting the relationship between OA use and crash responsibility. Case-control study using logistic regression to compare Fatality Analysis Reporting System (1993-2008) record of one or more crash-related unsafe driver actions (UDAs--a proxy measure of responsibility) between drivers with a positive drug test and drivers with a negative drug test for OA, controlling for age, other drug use, and driving history. The annual prevalence of OA use among all CMV drivers of large trucks involved in fatal crashes did not exceed 0.46% for any year in the study period and mostly ranged between 0.1 and 0.2%. Male truck drivers using OA had greater odds of committing an UDA (OR: 2.80; 95% CI: 1.64; 4.81). Middle-aged users had greater odds than younger or older users. The results of our study indicate that the presence of OAs is associated with greater odds of committing an UDA. This association may have implications for the commercial transport industry and traffic safety. However, the limited prevalence of OA use is encouraging and further research is needed to address the limitations of the study. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

Development of test scenarios for off-roadway crash countermeasures based on crash statistics

DOT National Transportation Integrated Search

2002-09-01

This report presents the results from an analysis of off-roadway crashes and proposes a set of crash-imminent scenarios to objectively test countermeasure systems for light vehicles (passenger cars, sport utility vehicles, vans, and pickup trucks) ba...

Crash testing of Louisiana's multi-directional, single steel post, small sign support.

DOT National Transportation Integrated Search

1992-06-01

The Louisiana Department of Transportation and Development (LDOTD) contracted with the Texas Transportation Institute (TTI) to evaluate the impact characteristics of Louisiana's multi-directional 5 inch diameter steel post, small sign support when im...

Occupant Motion Sensors : Rotational Accelerometer Development

DOT National Transportation Integrated Search

1972-04-01

A miniature mouthpiece rotational accelerometer has been developed to measure the angular acceleration of a head during vehicle crash or impact conditions. The device has been tested in the laboratory using a shake table and in the field using dummie...

Child restraint systems for civil aircraft.

DOT National Transportation Integrated Search

1978-03-01

Child restraint systems have been developed to provide protection to children involved in automobile crashes. These systems are not yet approved for use in civil aircraft. Six typical systems were exposed to controlled impacts on a test sled to simul...

Children restraint systems for civil aircraft.

DOT National Transportation Integrated Search

1978-03-01

Child restraint systems have been developed to provide protection to children involved in automobile crashes. These systems are not yet approved for use in civil aircraft. Six typical systems were exposed to controlled impacts on a test sled to simul...

Rupture of the aorta following road traffic accidents in the United Kingdom 1992-1999. The results of the co-operative crash injury study.

PubMed

Richens, D; Kotidis, K; Neale, M; Oakley, C; Fails, A

2003-02-01

The true incidence and survivability of blunt traumatic aortic rupture following road traffic accidents in the UK is unclear. The objective of this study was to determine the extent of blunt traumatic aortic rupture in the UK after road traffic accidents and the conditions under which it occurs. Data for the study was obtained from the Co-operative Crash Injury Study database. Road traffic accidents that happened between 1992 and 1999 and included in the Co-operative Crash Injury Study database were retrospectively investigated. A total of 8285 vehicles carrying 14,435 occupants were involved in 7067 accidents. There were 132 cases of blunt traumatic aortic rupture, of which the scene survival was 9% and the overall mortality was 98%. Twenty-one percent of all fatalities had blunt traumatic aortic rupture (130/613). Twenty-nine percent were due to frontal impacts and 44% were due to side impacts. Twelve percent of the blunt traumatic aortic rupture cases in frontal vehicle impacts were wearing seat belts and had airbag protection and 19% had no restraint mechanism. The Equivalent Test Speed of the accident vehicles, (where equivalent test speed provides an estimate of the vehicle impact severity and not an estimate of the vehicle speed at the time of the accident), ranged from 30 to 110 km/h in frontal impacts and from 15 to 82 km/h in side impacts. Blunt traumatic aortic rupture carries a high mortality and occurred in 21% of car occupant deaths in this sample of road traffic accidents. Impact scenarios varied but were most common from the side. The use of an airbag or seat belt does not eliminate risk. The injury can occur at low severity impacts particularly in side impact. Copyright 2002 Elsevier Science B.V.

Injury risk curves for the skeletal knee-thigh-hip complex for knee-impact loading.

PubMed

Rupp, Jonathan D; Flannagan, Carol A C; Kuppa, Shashi M

2010-01-01

Injury risk curves for the skeletal knee-thigh-hip (KTH) relate peak force applied to the anterior aspect of the flexed knee, the primary source of KTH injury in frontal motor-vehicle crashes, to the probability of skeletal KTH injury. Previous KTH injury risk curves have been developed from analyses of peak knee-impact force data from studies where knees of whole cadavers were impacted. However, these risk curves either neglect the effects of occupant gender, stature, and mass on KTH fracture force, or account for them using scaling factors derived from dimensional analysis without empirical support. A large amount of experimental data on the knee-impact forces associated with KTH fracture are now available, making it possible to estimate the effects of subject characteristics on skeletal KTH injury risk by statistically analyzing empirical data. Eleven studies were identified in the biomechanical literature in which the flexed knees of whole cadavers were impacted. From these, peak knee-impact force data and the associated subject characteristics were reanalyzed using survival analysis with a lognormal distribution. Results of this analysis indicate that the relationship between peak knee-impact force and the probability of KTH fracture is a function of age, total body mass, and whether the surface that loads the knee is rigid. Comparisons between injury risk curves for the midsize adult male and small adult female crash test dummies defined in previous studies and new risk curves for these sizes of occupants developed in this study suggest that previous injury risk curves generally overestimate the likelihood of KTH fracture at a given peak knee-impact force. Future work should focus on defining the relationships between impact force at the human knee and peak axial compressive forces measured by load cells in the crash test dummy KTH complex so that these new risk curves can be used with ATDs.

Occupant-to-occupant contact injury in motor vehicle crashes.

PubMed

Viano, David C; Parenteau, Chantal S

2017-10-03

This is a descriptive study of the frequency and risk of occupant-to-occupant contact injury by crash type and occupant age. It focused on rear impacts because of a recent Senate inquiry. 1994-2013 NASS-CDS data were used to investigate the effects of occupant-to-occupant contact on the risk of serious-to-fatal injury (Abbreviated Injury Scale [AIS] 3+) by crash type and age group. NASS-CDS in-depth cases were analyzed to identify crash circumstances for AIS 3+ occupant-to-occupant contact injury in rear crashes. Serious injury (AIS 3+) due to occupant-to-occupant contact was uncommon. It represented only 0.84% of all AIS 3+ injury for all age groups. The overall risk of AIS 3+ occupant-to-occupant contact injury was 0.042 ± 0.007%. The highest incidence was in side impacts (69.8%) followed by rollovers (22.9%). Occupant-to-occupant contact injury risk was lower in rear impacts than in other crash types, at 0.0078 ± 0.0054%. The highest risk of AIS 3+ injury with occupant-to-occupant was for the <9-year-old age group when compared to other age groups for all crash types. The risk was 0.051 ± 0.026%, representing 2.69% of all AIS 3+ injury in the <9-year-old age group. Only 4.2% of AIS 3+ occupant-to-occupant contact injury occurred to children <9 years old in rear impacts. The corresponding injury risk was lowest in rear impacts, at 0.014 ± 0.014%%, when compared to other crash types. The analysis of in-depth NASS-CDS cases of occupant-to-occupant contact injury in children< 9 years old involved in rear impacts identified very severe collisions in older model vehicles with deformation of the occupant compartment and yielding front seats as main factors for the contact injury. Front seat occupants injuring rear-seated children was not identified in the in-depth NASS-CDS cases. AIS 3+ occupant-to-occupant contact injury occurs primarily in side impacts and rollovers. Most contact injury is to adults (89.4% incidence). Occupant-to-occupant contact injury to children is rare in rear impacts.

Investigating the relationship between jobs-housing balance and traffic safety.

PubMed

Xu, Chengcheng; Li, Haojie; Zhao, Jingya; Chen, Jun; Wang, Wei

2017-10-01

This study aimed to investigate the effects of jobs-housing balance on traffic safety. The crash, demographic characteristics, employment, road network, household characteristics and traffic data were collected from the Los Angeles in 2010. One-way ANOVA tests indicated that the jobs-housing ratio significantly affects traffic safety in terms of crash frequency at traffic analysis zone (TAZ). To quantify the safety impacts of jobs-housing balance, the semi-parametric geographically weighted Poisson regression (S-GWPR) was further used to link crash frequency at TAZ with jobs-housing ratio and other contributing factors. The S-GWPR provides better fitness to the data than do the generalized linear regression, as the S-GWPR accounts for the spatial heterogeneity. The S-GWPR results showed that the jobs-housing relationship has a significant association with crash frequency at TAZ when the factors of traffic, network, and household characteristics are controlled. Crash frequency at TAZ level increases with an increase in the jobs-housing ratio. To further investigate the interactive effects between jobs-housing ratio and other factors, a comparative analysis was conducted to compare the variable elasticities under different jobs-housing ratios. The results indicate considerable interactive effects that traffic conditions and road network characteristics have different effects on crash frequency under various jobs-housing ratios. Copyright © 2017 Elsevier Ltd. All rights reserved.

Simulation of the right-angle car collision based on identified parameters

NASA Astrophysics Data System (ADS)

Kostek, R.; Aleksandrowicz, P.

2017-10-01

This article presents an influence of contact parameters on the collision pattern of vehicles. In this case a crash of two Fiat Cinquecentos with perpendicular median planes was simulated. The first vehicle was driven with a speed 50 km/h and crashed into the other one, standing still. It is a typical collision at junctions. For the first simulation, the default parameters of the V-SIM simulation program were assumed and then the parameters identified from the crash test of a Fiat Cinquecento, published by ADAC (Allgemeiner Deutscher Automobil-Club) were used. Various post-impact movements were observed for both simulations, which demonstrates a sensitivity of the simulation results to the assumed parameters. Applying the default parameters offered by the program can lead to inadequate evaluation of the collision part due to its only approximate reconstruction, which in consequence, influences the court decision. It was demonstrated how complex it is to reconstruct the pattern of the vehicles’ crash and what problems are faced by expert witnesses who tend to use default parameters.

Integrated assessment of pedestrian head impact protection in testing secondary safety and autonomous emergency braking.

PubMed

Searson, D J; Anderson, R W G; Hutchinson, T P

2014-02-01

Pedestrian impact testing is used to provide information to the public about the relative level of protection provided by different vehicles to a struck pedestrian. Autonomous Emergency Braking (AEB) is a relatively new technology that aims to reduce the impact speed of such crashes. It is expected that vehicles with AEB will pose less harm to pedestrians, and that the benefit will come about through reductions in the number of collisions and a change in the severity of impacts that will still occur. In this paper, an integration of the assessment of AEB performance and impact performance is proposed based on average injury risk. Average injury risk is calculated using the result of an impact test and a previously published distribution of real world crash speeds. A second published speed distribution is used that accounts for the effects of AEB, and reduced average risks are implied. This principle allows the effects of AEB systems and secondary safety performance to be integrated into a single measure of safety. The results are used to examine the effect of AEB on Euro NCAP and ANCAP assessments using previously published results on the likely effect of AEB. The results show that, given certain assumptions about AEB performance, the addition of AEB is approximately the equivalent of increasing Euro NCAP test performance by one band, which corresponds to an increase in the score of 25% of the maximum. Copyright © 2013 Elsevier Ltd. All rights reserved.

Safety Analysis of Dual Purpose Metal Cask Subjected to Impulsive Loads due to Aircraft Engine Crash

NASA Astrophysics Data System (ADS)

Shirai, Koji; Namba, Kosuke; Saegusa, Toshiari

In Japan, the first Interim Storage Facility of spent nuclear fuel away from reactor site is being planned to start its commercial operation around 2010, in use of dual-purpose metal cask in the northern part of Main Japan Island. Business License Examination for safety design approval has started since March, 2007. To demonstrate the more scientific and rational performance of safety regulation activities on each phase for the first license procedure, CREPEI has executed demonstration tests with full scale casks, such as drop tests onto real targets without impact limiters(1) and seismic tests subjected to strong earthquake motions(2). Moreover, it is important to develop the knowledge for the inherent security of metal casks under extreme mechanical-impact conditions, especially for increasing interest since the terrorist attacks from 11th September 2001(3)-(6). This paper presents dynamic mechanical behavior of the metal cask lid closure system caused by direct aircraft engine crash and describes calculated results (especially, leak tightness based on relative dynamic displacements between metallic seals). Firstly, the local penetration damage of the interim storage facility building by a big passenger aircraft engine crash (diameter 2.7m, length 4.3m, weight 4.4ton, impact velocity 90m/s) has been examined. The reduced velocity is calculated by the local damage formula for concrete structure with its thickness of 70cm. The load vs. time function for this reduced velocity (60m/s) is estimated by the impact analysis using Finite Element code LS-DYNA with the full scale engine model onto a hypothetically rigid target. Secondly, as the most critical scenarios for the metal cask, two impact scenarios (horizontal impact hitting the cask and vertical impact onto the lid metallic seal system) are chosen. To consider the geometry of all bolts for two lids, the gasket reaction forces and the inner pressure of the cask cavity, the detailed three dimensional FEM models are developed and calculated. Main criteria for estimating the maximum leakage rate for the lid metallic seal system are no loss of the pre-stress of the lid bolts, no appearance of the plastic region between the metal seal flanges, and no large relative deformation of the lid seals. Finally, in both cases, the low leakage rate for the metal cask lid closure system under the impulsive loads due to aircraft engine crash will be proved thoroughly.

Impact of federal compliance reviews of trucking companies in reducing highway truck crashes.

PubMed

Chen, Guang Xiang

2008-01-01

The compliance review (CR) is a federal program monitoring motor carrier safety performance and regulatory compliance. This study sought to assess the impact of CRs on reviewed trucking companies in reducing truck crashes. Data was from the Motor Carrier Management Information System. Study subjects were trucking companies established during 1990-1995, had at least one truck, and remained active until April 2004. Truck crash data of these companies was examined from 1996 to 2003. The crash rates in 2003 and annual percentage changes in number of crashes were computed. Analyses were stratified by company size, organization, operation classification, and safety rating. Companies that received CRs had a higher crash rate than never-reviewed companies. Reviewed companies experienced a 39-15% reduction in number of crashes in the year the CR was performed. The reduction in crashes was observed in all reviewed companies regardless of company size, operation classification, type of organization, or safety rating. The reduction in crashes was sustained for at least 7 years after CRs. The study results were controlled for the year in which CRs were performed, crash trend, and CR selection bias. However, further studies, especially a randomized prospective longitudinal study, are needed to overcome the limitations that are associated with an observation study.

Crash-test dummy and pendulum impact tests of ice hockey boards: greater displacement does not reduce impact.

PubMed

Schmitt, Kai-Uwe; Muser, Markus H; Thueler, Hansjuerg; Bruegger, Othmar

2018-01-01

One injury mechanism in ice hockey is impact with the boards. We investigated whether more flexible hockey boards would provide less biomechanical loading on impact than did existing (reference) boards. We conducted impact tests with a dynamic pendulum (mass 60 kg) and with crash test dummies (ES-2 dummy, 4.76 m/s impact speed). Outcomes were biomechanical loading experienced by a player in terms of head acceleration, impact force to the shoulder, spine, abdomen and pelvis as well as compression of the thorax. The more flexible board designs featured substantial displacement at impact. Some so-called flexible boards were displaced four times more than the reference board. The new boards possessed less stiffness and up to 90 kg less effective mass, reducing the portion of the board mass a player experienced on impact, compared with boards with a conventional design. Flexible boards resulted in a similar or reduced loading for all body regions, apart from the shoulder. The displacement of a board system did not correlate directly with the biomechanical loading. Flexible board systems can reduce the loading of a player on impact. However, we found no correlation between the displacement and the biomechanical loading; accordingly, displacement alone was insufficient to characterise the overall loading of a player and thus the risk of injury associated with board impact. Ideally, the performance of boards is assessed on the basis of parameters that show a good correlation to injury risk. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Benefits of a Low Severity Frontal Crash Test

PubMed Central

Digges, Kennerly; Dalmotas, Dainius

2007-01-01

The US Federal Motor Vehicle Safety Standard for frontal protection requires vehicle crash tests into a rigid barrier with two belted dummies in the front seats. The standard was recently modified to require two separate 56 Kph frontal tests. In one test the dummies are 50% males. In the other test, the dummies are 5% females. Analysis of crash test data indicates that the 56 Kph test does not encourage technology to reduce chest injuries in lower severity crashes. Tests conducted by Transport Canada provide data from belted 5% female dummies in the front seats of vehicles that were subjected crashes into a rigid barrier at 40 Kph. An analysis of the results showed that for many vehicles, the risks of serious chest injuries were higher in the 40 Kph test than in a 56 Kph test. This paper examines the benefits that would result from a requirement for a low severity (40 Kph) frontal barrier crash test with two belted 5% female dummies and more stringent chest injury requirements. A preliminary benefits analysis for chest deflection allowable in the range of 28 mm. to 36 mm. was conducted. A standard that limits the chest deflection to 34 mm. would reduce serious chest injury by 16% to 24% for the belted population in frontal crashes. PMID:18184499

Benefits of a low severity frontal crash test.

PubMed

Digges, Kennerly; Dalmotas, Dainius

2007-01-01

The US Federal Motor Vehicle Safety Standard for frontal protection requires vehicle crash tests into a rigid barrier with two belted dummies in the front seats. The standard was recently modified to require two separate 56 Kph frontal tests. In one test the dummies are 50% males. In the other test, the dummies are 5% females. Analysis of crash test data indicates that the 56 Kph test does not encourage technology to reduce chest injuries in lower severity crashes. Tests conducted by Transport Canada provide data from belted 5% female dummies in the front seats of vehicles that were subjected crashes into a rigid barrier at 40 Kph. An analysis of the results showed that for many vehicles, the risks of serious chest injuries were higher in the 40 Kph test than in a 56 Kph test. This paper examines the benefits that would result from a requirement for a low severity (40 Kph) frontal barrier crash test with two belted 5% female dummies and more stringent chest injury requirements. A preliminary benefits analysis for chest deflection allowable in the range of 28 mm. to 36 mm. was conducted. A standard that limits the chest deflection to 34 mm. would reduce serious chest injury by 16% to 24% for the belted population in frontal crashes.

Further development of Motorcycle Autonomous Emergency Braking (MAEB), what can in-depth studies tell us? A multinational study.

PubMed

Savino, Giovanni; Rizzi, Matteo; Brown, Julie; Piantini, Simone; Meredith, Lauren; Albanese, Bianca; Pierini, Marco; Fitzharris, Michael

2014-01-01

In 2006, Motorcycle Autonomous Emergency Braking (MAEB) was developed by a European Consortium (Powered Two Wheeler Integrated Safety, PISa) as a crash severity countermeasure for riders. This system can detect an obstacle through sensors in the front of the motorcycle and brakes automatically to achieve a 0.3 g deceleration if the collision is inevitable and the rider does not react. However, if the rider does brake, full braking force is applied automatically. Previous research into the potential benefits of MAEB has shown encouraging results. However, this was based on MAEB triggering algorithms designed for motorcycle crashes involving impacts with fixed objects and rear-end crashes. To estimate the full potential benefit of MAEB, there is a need to understand the full spectrum of motorcycle crashes and further develop triggering algorithms that apply to a wider spectrum of crash scenarios. In-depth crash data from 3 different countries were used: 80 hospital admittance cases collected during 2012-2013 within a 3-h driving range of Sydney, Australia, 40 crashes with Injury Severity Score (ISS)>15 collected in the metropolitan area of Florence, Italy, during 2009-2012, and 92 fatal crashes that occurred in Sweden during 2008-2009. In the first step, the potential applicability of MAEB among the crashes was assessed using a decision tree method. To achieve this, a new triggering algorithm for MAEB was developed to address crossing scenarios as well as crashes involving stationary objects. In the second step, the potential benefit of MAEB across the applicable crashes was examined by using numerical computer simulations. Each crash was reconstructed twice-once with and once without MAEB deployed. The principal finding is that using the new triggering algorithm, MAEB is seen to apply to a broad range of multivehicle motorcycle crashes. Crash mitigation was achieved through reductions in impact speed of up to approximately 10 percent, depending on the crash scenario and the initial vehicle pre-impact speeds. This research is the first attempt to evaluate MAEB with simulations on a broad range of crash scenarios using in-depth data. The results give further insights into the feasibility of MAEB in different speed ranges. It is clear then that MAEB is a promising technology that warrants further attention by researchers, manufacturers, and regulators.

A Summary of DOD-Sponsored Research Performed at NASA Langley's Impact Dynamics Research Facility

NASA Technical Reports Server (NTRS)

Jackson, Karen E.; Boitnott, Richard L.; Fasanella, Edwin L.; Jones, Lisa E.; Lyle, Karen H.

2004-01-01

The Impact Dynamics Research Facility (IDRF) is a 240-ft.-high gantry structure located at NASA Langley Research Center in Hampton, Virginia. The IDRF was originally built in the early 1960's for use as a Lunar Landing Research Facility. As such, the facility was configured to simulate the reduced gravitational environment of the Moon, allowing the Apollo astronauts to practice lunar landings under realistic conditions. In 1985, the IDRF was designated a National Historic Landmark based on its significant contributions to the Apollo Moon Landing Program. In the early 1970's the facility was converted into its current configuration as a full-scale crash test facility for light aircraft and rotorcraft. Since that time, the IDRF has been used to perform a wide variety of impact tests on full-scale aircraft, airframe components, and space vehicles in support of the General Aviation (GA) aircraft industry, the U.S. Department of Defense (DOD), the rotorcraft industry, and the NASA Space program. The objectives of this paper are twofold: to describe the IDRF facility and its unique capabilities for conducting structural impact testing, and to summarize the impact tests performed at the IDRF in support of the DOD. These tests cover a time period of roughly 2 1/2 decades, beginning in 1975 with the full-scale crash test of a CH-47 Chinook helicopter, and ending in 1999 with the external fuel system qualification test of a UH-60 Black Hawk helicopter. NASA officially closed the IDRF in September 2003; consequently, it is important to document the past contributions made in improved human survivability and impact tolerance through DOD-sponsored research performed at the IDRF.

Impact of pavement conditions on crash severity.

PubMed

Li, Yingfeng; Liu, Chunxiao; Ding, Liang

2013-10-01

Pavement condition has been known as a key factor related to ride quality, but it is less clear how exactly pavement conditions are related to traffic crashes. The researchers used Geographic Information System (GIS) to link Texas Department of Transportation (TxDOT) Crash Record Information System (CRIS) data and Pavement Management Information System (PMIS) data, which provided an opportunity to examine the impact of pavement conditions on traffic crashes in depth. The study analyzed the correlation between several key pavement condition ratings or scores and crash severity based on a large number of crashes in Texas between 2008 and 2009. The results in general suggested that poor pavement condition scores and ratings were associated with proportionally more severe crashes, but very poor pavement conditions were actually associated with less severe crashes. Very good pavement conditions might induce speeding behaviors and therefore could have caused more severe crashes, especially on non-freeway arterials and during favorable driving conditions. In addition, the results showed that the effects of pavement conditions on crash severity were more evident for passenger vehicles than for commercial vehicles. These results provide insights on how pavement conditions may have contributed to crashes, which may be valuable for safety improvement during pavement design and maintenance. Readers should notice that, although the study found statistically significant effects of pavement variables on crash severity, the effects were rather minor in reality as suggested by frequency analyses. Copyright © 2013 Elsevier Ltd. All rights reserved.

Commercial truck crash injury severity analysis using gradient boosting data mining model.

PubMed

Zheng, Zijian; Lu, Pan; Lantz, Brenda

2018-06-01

Truck crashes contribute to a large number of injuries and fatalities. This study seeks to identify the contributing factors affecting truck crash severity using 2010 to 2016 North Dakota and Colorado crash data provided by the Federal Motor Carrier Safety Administration. To fulfill a gap of previous studies, broad considerations of company and driver characteristics, such as company size and driver's license class, along with vehicle types and crash characteristics are researched. Gradient boosting, a data mining technique, is applied to comprehensively analyze the relationship between crash severities and a set of heterogeneous risk factors. Twenty five variables were tested and 22 of them are identified as significant variables contributing to injury severities, however, top 11 variables account for more than 80% of injury forecasting. The relative variable importance analysis is conducted and furthermore marginal effects of all contributing factors are also illustrated in this research. Several factors such as trucking company attributes (e.g., company size), safety inspection values, trucking company commerce status (e.g., interstate or intrastate), time of day, driver's age, first harmful events, and registration condition are found to be significantly associated with crash injury severity. Even though most of the identified contributing factors are significant for all four levels of crash severity, their relative importance and marginal effect are all different. For the first time, trucking company and driver characteristics are proved to have significant impact on truck crash injury severity. Some of the results in this study reinforce previous studies' conclusions. Findings in this study can be helpful for transportation agencies to reduce injury severity, and develop efficient strategies to improve safety. Copyright © 2018 National Safety Council and Elsevier Ltd. All rights reserved.

Using micro-simulation to investigate the safety impacts of transit design alternatives at signalized intersections.

PubMed

Li, Lu; Persaud, Bhagwant; Shalaby, Amer

2017-03-01

This study investigates the use of crash prediction models and micro-simulation to develop an effective surrogate safety assessment measure at the intersection level. With the use of these tools, hypothetical scenarios can be developed and explored to evaluate the safety impacts of design alternatives in a controlled environment, in which factors not directly associated with the design alternatives can be fixed. Micro-simulation models are developed, calibrated, and validated. Traffic conflicts in the micro-simulation models are estimated and linked with observed crash frequency, which greatly alleviates the lengthy time needed to collect sufficient crash data for evaluating alternatives, due to the rare and infrequent nature of crash events. A set of generalized linear models with negative binomial error structure is developed to correlate the simulated conflicts with the observed crash frequency in Toronto, Ontario, Canada. Crash prediction models are also developed for crashes of different impact types and for transit-involved crashes. The resulting statistical significance and the goodness-of-fit of the models suggest adequate predictive ability. Based on the established correlation between simulated conflicts and observed crashes, scenarios are developed in the micro-simulation models to investigate the safety effects of individual transit line elements by making hypothetical modifications to such elements and estimating changes in crash frequency from the resulting changes in conflicts. The findings imply that the existing transit signal priority schemes can have a negative effect on safety performance, and that the existing near-side stop positioning and streetcar transit type can be safer at their current state than if they were to be replaced by their respective counterparts. Copyright © 2017 Elsevier Ltd. All rights reserved.

Effect of driver's age and side of impact on crash severity along urban freeways: a mixed logit approach.

PubMed

Haleem, Kirolos; Gan, Albert

2013-09-01

This study identifies geometric, traffic, environmental, vehicle-related, and driver-related predictors of crash injury severity on urban freeways. The study takes advantage of the mixed logit model's ability to account for unobserved effects that are difficult to quantify and may affect the model estimation, such as the driver's reaction at the time of crash. Crashes of 5 years occurring on 89 urban freeway segments throughout the state of Florida in the United States were used. Examples of severity predictors explored include traffic volume, distance of the crash to the nearest ramp, and detailed driver's age, vehicle types, and sides of impact. To show how the parameter estimates could vary, a binary logit model was compared with the mixed logit model. It was found that the at-fault driver's age, traffic volume, distance of the crash to the nearest ramp, vehicle type, side of impact, and percentage of trucks significantly influence severity on urban freeways. Additionally, young at-fault drivers were associated with a significant severity risk increase relative to other age groups. It was also observed that some variables in the binary logit model yielded illogic estimates due to ignoring the random variation of the estimation. Since the at-fault driver's age and side of impact were significant random parameters in the mixed logit model, an in-depth investigation was performed. It was noticed that back, left, and right impacts had the highest risk among middle-aged drivers, followed by young drivers, very young drivers, and finally, old and very old drivers. To reduce side impacts due to lane changing, two primary strategies can be recommended. The first strategy is to conduct campaigns to convey the hazardous effect of changing lanes at higher speeds. The second is to devise in-vehicle side crash avoidance systems to alert drivers of a potential crash risk. The study provided a promising approach to screening the predictors before fitting the mixed logit model using the random forest technique. Furthermore, potential countermeasures were proposed to reduce the severity of impacts. Copyright © 2013 National Safety Council and Elsevier Ltd. All rights reserved.

Incidence and crash mechanisms of aortic injury during the past decade.

PubMed

Schulman, Carl I; Carvajal, Daniel; Lopez, Peter P; Soffer, Dror; Habib, Fahim; Augenstein, Jeffrey

2007-03-01

Aortic injuries were traditionally thought to be the result of severe frontal crashes. Newer data has suggested other crash types such as nearside crashes may also be important in aortic injury. We hypothesized the implementation of recent safety measures would decrease the incidence of aortic injury associated with fatal motor vehicle crashes. The autopsy reports of all traffic fatalities for motor vehicle occupants in a large urban county for the years 1993 to 2004 were examined. The demographics, impact types, safety measures used, and the presence of any aortic injury were recorded. Trends were evaluated for significance by weighted linear regression. The incidence of aortic injury associated with fatal motor vehicle crashes has remained unchanged during the past 12 years (r = 0.057, p = 0.45). There is a trend toward decreased aortic injuries associated with frontal crashes (r = 0.26, p = 0.089) but no change in aortic injuries associated with nearside or farside crashes (r = 0.053, p = 0.47), when the crash resulted in a fatality. This is despite an increase in seat belt use and increased presence of airbags during the same time period. Despite improved safety measures designed to minimize the occurrence of aortic injuries, the incidence of blunt aortic injury in fatal motor vehicle crashes has not decreased during the past decade. Although not statistically significant, there is a trend toward decreased frontal impacts in fatal motor vehicle crashes associated with aortic injuries. The nearside crash mechanism continues to play a prominent role, and efforts at improving vehicle safety should be focused on crash mechanisms as they relate to aortic injury.

"Captive Column" Crash Tests : Crash Testing of a Light Standard Luminaire Pole

DOT National Transportation Integrated Search

1981-03-01

Under contract No. DOT-FH-11-9606 the Nevada Department of Transportation (NDOT) conducted crash testing to study the capability of "Captive Column" light standard appurtenances under controlled conditions. The studies were precursors of actual on si...

Development and use of computational techniques in Army Aviation research and development programs for crash resistant helicopter technology

NASA Technical Reports Server (NTRS)

Burrows, Leroy T.

1993-01-01

During the 1960's over 30 full-scale aircraft crash tests were conducted by the Flight Safety Foundation under contract to the Aviation Applied Technology Directorate (AATD) of the U.S. Army Aviation Systems Command (AVSCOM). The purpose of these tests were to conduct crash injury investigations that would provide a basis for the formulation of sound crash resistance design criteria for light fixed-wing and rotary wing aircraft. This resulted in the Crash Survival Design Criteria Designer's Guide which was first published in 1967 and has been revised numerous times, the last being in 1989. Full-scale aircraft crash testing is an expensive way to investigate structural deformations of occupied spaces and to determine the decelerative loadings experienced by occupants in a crash. This gave initial impetus to the U.S. Army to develop analytical methods to predict the dynamic response of aircraft structures in a crash. It was believed that such analytical tools could be very useful in the preliminary design stage of a new helicopter system which is required to demonstrate a level of crash resistance and had to be more cost effective than full-scale crash tests or numerous component design support tests. From an economic point of view, it is more efficient to optimize for the incorporation of crash resistance features early in the design stage. However, during preliminary design it is doubtful if sufficient design details, which influence the exact plastic deformation shape of structural elements, will be available. The availability of simple procedures to predict energy absorption and load-deformation characteristics will allow the designer to initiate valuable cost, weight, and geometry tradeoff studies. The development of these procedures will require some testing of typical specimens. This testing should, as a minimum, verify the validity of proposed procedures for providing pertinent nonlinear load-deformation data. It was hoped that through the use of these analytical models, the designer could optimize aircraft design for crash resistance from both a weight and cost increment standpoint, thus enhancing the acceptance of the design criteria for crash resistance.

Vertical drop test of a transport fuselage section located aft of the wing

NASA Technical Reports Server (NTRS)

Fasanella, E. L.; Alfaro-Bou, E.

1986-01-01

A 12-foot long Boeing 707 aft fuselage section with a tapering cross section was drop tested at the NASA Langley Research Center to measure structural, seat, and occupant response to vertical crash laods and to provide data for nonlinear finite element modeling. This was the final test in a series of three different transport fuselage sections tested under identical conditions. The test parameters at impact were: 20 ft/s velocity, and zero pitch, roll, and yaw. In addition, the test was an operational shock test of the data acquisition system used for the Controlled Impact Demonstration (CID) of a remotely piloted Boeing 720 that was crash tested at NASA Ames Dryden Flight Research Facility on December 1, 1984. Post-test measurements of the crush showed that the front of the section (with larger diameter) crushed vertically approximately 14 inches while the rear crushed 18 inches. Analysis of the data traces indicate the maximum peak normal (vertical) accelerations at the bottom of the frames were approximately 109 G at body station 1040 and 64 G at body station 1120. The peak floor acceleration varied from 14 G near the wall to 25 G near the center where high frequency oscillations of the floor were evident. The peak anthropomorphic dummy pelvis normal (vertical) acceleration was 19 G's.

A new method to evaluate future impact of vehicle safety technology in Sweden.

PubMed

Strandroth, Johan; Sternlund, Simon; Tingvall, Claes; Johansson, Roger; Rizzi, Matteo; Kullgren, Anders

2012-10-01

In the design of a safe road transport system there is a need to better understand the safety challenges lying ahead. One way of doing that is to evaluate safety technology with retrospective analysis of crashes. However, by using retros- pective data there is the risk of adapting safety innovations to scenarios irrelevant in the future. Also, challenges arise as safety interventions do not act alone but are rather interacting components in a complex road transport system. The objective of this study was therefore to facilitate the prioritizing of road safety measures by developing and applying a new method to consider possible impact of future vehicle safety technology. The key point was to project the chain of events leading to a crash today into the crashes for a given time in the future. Assumptions on implementation on safety technologies were made and these assump- tions were applied on the crashes of today. It was estimated which crashes would be prevented and the residual was analyzed to identify the characteristics of future crashes. The Swedish Transport Administration's in-depth studies of fatal crashes from 2010 involving car passengers (n=156) were used. This study estimated that the number of killed car occupant would be reduced with 53 percent from the year 2010 to 2020. Through this new method, valuable information regarding the characteristic of the future crashes was found. The results of this study showed that it was possible to evaluate future impact of vehicle safety technology if detailed and representative crash data is available.

CID overview

NASA Technical Reports Server (NTRS)

Hayduk, R. J.

1986-01-01

On December 1, 1984, NASA and the Federal Aviation Administration (FAA) conducted the first remotely piloted air-to-ground crash test of a transport category aircraft. The Full-Scale Transport Controlled Impact Demonstration (CID) was the culmination of 4 years of effort by the two agencies. NASA and the FAA had many objectives during the joint planning and execution of the Controlled Impact Demonstration. The structural loads experiment was very successful. Ninety-seven percent of the channels were active at impact. The data is still being assessed. Only a portion of the data is presented here; approximately 80 channels of data are available. Analysis of the remaining data is in progress. Interior photography was also very successful. One hundred percent of the cameras functioned. The film contains unique information on the development of fire and smoke in the interior of the aircraft. From a human tolerance point of view, the CID was simulation of a survivable crash.

Impact Response Comparison Between Parametric Human Models and Postmortem Human Subjects with a Wide Range of Obesity Levels.

PubMed

Zhang, Kai; Cao, Libo; Wang, Yulong; Hwang, Eunjoo; Reed, Matthew P; Forman, Jason; Hu, Jingwen

2017-10-01

Field data analyses have shown that obesity significantly increases the occupant injury risks in motor vehicle crashes, but the injury assessment tools for people with obesity are largely lacking. The objectives of this study were to use a mesh morphing method to rapidly generate parametric finite element models with a wide range of obesity levels and to evaluate their biofidelity against impact tests using postmortem human subjects (PMHS). Frontal crash tests using three PMHS seated in a vehicle rear seat compartment with body mass index (BMI) from 24 to 40 kg/m 2 were selected. To develop the human models matching the PMHS geometry, statistical models of external body shape, rib cage, pelvis, and femur were applied to predict the target geometry using age, sex, stature, and BMI. A mesh morphing method based on radial basis functions was used to rapidly morph a baseline human model into the target geometry. The model-predicted body excursions and injury measures were compared to the PMHS tests. Comparisons of occupant kinematics and injury measures between the tests and simulations showed reasonable correlations across the wide range of BMI levels. The parametric human models have the capability to account for the obesity effects on the occupant impact responses and injury risks. © 2017 The Obesity Society.

The relationship of alcohol safety laws to drinking drivers in fatal crashes.

PubMed

Voas, R B; Tippetts, A S; Fell, J

2000-07-01

This paper presents an analysis of the relationships between the passage of key alcohol safety laws and the number of drinking drivers in fatal crashes. The study evaluated three major alcohol safety laws--administrative license revocation laws, 0.10 illegal per se, and 0.08 illegal per se laws--on the proportion of drinking drivers in fatal crashes. Drivers aged 21 and older in fatal crashes at two BAC levels--0.01-0.09 and 0.10 or greater--were considered separately. Drivers under age 21 were not included because they are affected by the Minimum Legal Drinking Age (MLDA) law. This study used data on drinking drivers in fatal crashes from the Fatality Analysis Reporting System (FARS) covering 16 years (1982-1997) for all 50 states and the District of Columbia. Also included in the study were such variables as per capita alcohol consumption and annual vehicle miles traveled (VMT), which could affect the number of alcohol-related crashes. The results indicate that each of the three laws had a significant relationship to the downward trend in alcohol-related fatal crashes in the United States over that period. This paper points out that this long-term trend is not the product of a single law. Instead, it is the result of the growing impact of several laws over time plus the affect of some factors not included in the model tested (such as the increasing use of sobriety checkpoints and the media's attention to the drinking-and-driving problem).

Rotational Collision Apparatus for Indoor Egg Drops

NASA Astrophysics Data System (ADS)

Halada, Richard

2003-05-01

Our units about momentum and energy are richly illustrated with applications to car crashes and explanations of such safety features as airbags and crumple zones. The main lab exercise, however, is an egg crash (car insurance rates being so much higher). Fairly standard rules apply: Students must devise an "egg-protection package" that will keep a teacher-supplied egg intact through two successive impacts. After the test, they must hand in a written analysis of the specific physics principles they employed, modifications they would make after seeing their project's actual performance, and suggestions for applying their protection system to auto safety.

Review of Aircraft Crash Structural Response Research.

DTIC Science & Technology

1982-08-01

structures consisting of conventional built-up metallic construction and those consisting of advanced composite materials were of interest. The latter...increasing importance. Some recent theoretical and experimental studies of the behavior of composite - material structures subjected to severe static...dynamic, and/or impact conditions are noted. Such topics as crashworthiness testing ot composite fuselage structures, the impact resistance of graphite and

Lavia – an Evaluation of the Potential Safety Benefits of the French Intelligent Speed Adaptation Project

PubMed Central

Driscoll, R.; Page, Y.; Lassarre, S.; Ehrlich, J.

2007-01-01

This paper presents the potential safety benefits of the experimental French LAVIA Intelligent Speed Adaptation system, according to road network and system mode, based on observed driving speeds, distributions of crash severity and crash injury risk. Results are given for car frontal and side impacts that together, represent 80% of all serious and fatal injuries in France. Of the three system modes tested (advisory, driver select, mandatory), our results suggest that driver select would most significantly reduce serious injuries and death. We estimate this 100% utilization of cars equipped with this type of speed adaptation system would decrease injury rates by 6% to 16% over existing conditions depending on the type of crash (frontal or side) and road environment considered. Some limitations associated with the analysis are also identified. PMID:18184509

An energy-absorbing sliding seat for reducing neck injury risks in rear impact--analysis for prototype built.

PubMed

Zhang, Xiaowei; Zhou, Qing

2016-01-01

This study investigated overall performance of an energy-absorbing sliding seat concept for whiplash neck injury prevention. The sliding seat allows its seat pan to slide backward for some distance under certain restraint force to absorb crash energy in rear impacts. A numerical model that consisted of vehicle interior, seat, seat belt, and BioRID II dummy was built in MADYMO to evaluate whiplash neck injury in rear impact. A parametric study of the effects of sliding seat parameters, including position and cushion stiffness of head restraint, seatback cushion stiffness, recliner characteristics, and especially sliding energy-absorbing (EA) restraint force, on neck injury criteria was conducted in order to compare the effectiveness of the sliding seat concept with that of other existing anti-whiplash mechanisms. Optimal sliding seat design configurations in rear crashes of different severities were obtained. A sliding seat prototype with bending of a steel strip as an EA mechanism was fabricated and tested in a sled test environment to validate the concept. The performance of the sliding seat under frontal and rollover impacts was checked to make sure the sliding mechanism did not result in any negative effects. The protective effect of the sliding seat with EA restraint force is comparable to that of head restraint-based and recliner stiffness-based anti-whiplash mechanisms. EA restraint force levels of 3 kN in rear impacts of low and medium severities and 6 kN in impacts of high severity were obtained from optimization. In frontal collision and rollover, compared to the nonsliding seat, the sliding seat does not result in any negative effects on occupant protection. The sled test results of the sliding seat prototype have shown the effectiveness of the concept for reducing neck injury risks. As a countermeasure, the sliding seat with appropriate restraint forces can significantly reduce whiplash neck injury risk in rear impacts of low, medium, and high severities with no negative effects on other crash load cases.

Target crashes and safety benefits estimation methodology for pedestrian crash avoidance/mitigation systems

DOT National Transportation Integrated Search

2014-04-01

Through the analysis of national crash databases from the National Highway Traffic Safety Administration, pre-crash scenarios are identified, prioritized, and described for the development of objective tests for pedestrian crash avoidance/mitigation ...

The Impact of the Thai Motorcycle Transition on Road Traffic Injury: Thai Cohort Study Results

PubMed Central

Berecki-Gisolf, Janneke; Yiengprugsawan, Vasoontara; Kelly, Matthew; McClure, Roderick; Seubsman, Sam-ang; Sleigh, Adrian

2015-01-01

Objectives The aim of this study was to investigate the impact of motorcycle to car transitioning and urbanisation on traffic injury rates in Thailand. Design Analysis of two consecutive surveys of a large national cohort study. Setting Thailand. Participants The data derived from 57,154 Thai Cohort Study (TCS) participants who provided relevant data on both the 2005 and 2009 surveys. Primary and secondary outcome measures Motorcycle and car traffic crash injury self-reported in 2009, with twelve months’ recall. Results In 2009, 5608(10%) participants reported a traffic crash injury. Most crashes involved a motorcycle (74%). Car access increased and motorcycle use decreased between 2005 and 2009. Among those who used a motorcycle at both time points, traffic injury incidence was 2.8 times greater compared to those who did not use a motorcycle at either time point. Multivariable logistic regression models were used to test longitudinal and cross sectional factors associated with traffic crash injury: in the adjusted model, cars were negatively and motorcycles positively associated with injury. Living in an urban area was not injury protective in the adjusted model of traffic crash injury. Conclusions Ongoing urbanisation in Thailand can be expected to lead to further reductions in road traffic injuries based on transition from motorcycles to cars in urban areas. Cities, however, do not provide an intrinsically safer traffic environment. To accommodate a safe transition to car use in Thailand, traffic infrastructural changes anticipating the growing car density in urban areas is warranted. PMID:25826214

Long-term impact on alcohol-involved crashes of lowering the minimum purchase age in New Zealand.

PubMed

Huckle, Taisia; Parker, Karl

2014-06-01

We assessed the long-term effect of lowering the minimum purchase age for alcohol from age 20 to age 18 years on alcohol-involved crashes in New Zealand. We modeled ratios of drivers in alcohol-involved crashes to drivers in non-alcohol-involved crashes by age group in 3 time periods using logistic regression, controlling for gender and adjusting for multiple comparisons. Before the law change, drivers aged 18 to 19 and 20 to 24 years had similar odds of an alcohol-involved crash (P = .1). Directly following the law change, drivers aged 18 to 19 years had a 15% higher odds of being in an alcohol-involved crash than did drivers aged 20 to 24 years (P = .038). In the long term, drivers aged 18 to 19 years had 21% higher odds of an alcohol-involved crash than did the age control group (P ≤ .001). We found no effects for fatal alcohol-involved crashes alone and no trickle-down effects for the youngest group. Lowering the purchase age for alcohol was associated with a long-term impact on alcohol-involved crashes among drivers aged 18 to 19 years. Raising the minimum purchase age for alcohol would be appropriate.

Long-Term Impact on Alcohol-Involved Crashes of Lowering the Minimum Purchase Age in New Zealand

PubMed Central

Parker, Karl

2014-01-01

Objectives. We assessed the long-term effect of lowering the minimum purchase age for alcohol from age 20 to age 18 years on alcohol-involved crashes in New Zealand. Methods. We modeled ratios of drivers in alcohol-involved crashes to drivers in non–alcohol-involved crashes by age group in 3 time periods using logistic regression, controlling for gender and adjusting for multiple comparisons. Results. Before the law change, drivers aged 18 to 19 and 20 to 24 years had similar odds of an alcohol-involved crash (P = .1). Directly following the law change, drivers aged 18 to 19 years had a 15% higher odds of being in an alcohol-involved crash than did drivers aged 20 to 24 years (P = .038). In the long term, drivers aged 18 to 19 years had 21% higher odds of an alcohol-involved crash than did the age control group (P ≤ .001). We found no effects for fatal alcohol-involved crashes alone and no trickle-down effects for the youngest group. Conclusions. Lowering the purchase age for alcohol was associated with a long-term impact on alcohol-involved crashes among drivers aged 18 to 19 years. Raising the minimum purchase age for alcohol would be appropriate. PMID:24825211

Impact and injury patterns in between-rails frontal crashes of vehicles with good ratings for frontal crash protection.

PubMed

Morgan, Richard M; Cui, Chongzhen; Digges, Kennerly H; Cao, Libo; Kan, Cing-Dao Steve

2012-01-01

This research investigated (1) what are the key attributes of the between-rail, frontal crash, (2) what are the types of object contacted, and (3) what is the type of resulting trauma. The method was to study with both weighted and in-depth case reviews of NASS-CDS crash data with direct damage between the longitudinal rails in frontal crashes. Individual case selection was limited to belted occupants in between-rail, frontal impacts of good-rated, late-model vehicles equipped with air bags.This paper evaluates the risk of trauma for drivers in cars and LTVs in between-rail, frontal crashes, and suggests the between-rail impact is more dangerous to car drivers. Using weighted data-representing 227,305 tow-away crashes-the resulting trauma to various body regions was analyzed to suggest greatest injury is to the chest, pelvis/thigh/knee/leg, and foot/ankle. This study analyzed the type of object that caused the direct damage between the rails, including small tree or post, large tree or pole, and another vehicle; and found that the struck object was most often another vehicle or a large tree/pole. Both the extent of damage and the occupant compartment intrusion were explored, and suggest that 64% of the serious injuries are associated with increasing intrusion. Individual NASS cases were reviewed to gain a deeper understanding of the mechanical particulars in the between-rail crash.

Motor vehicle crash-related subdural hematoma from real-world head impact data.

PubMed

Urban, Jillian E; Whitlow, Christopher T; Edgerton, Colston A; Powers, Alexander K; Maldjian, Joseph A; Stitzel, Joel D

2012-12-10

Abstract Approximately 1,700,000 people sustain a traumatic brain injury (TBI) each year and motor vehicle crashes (MVCs) are a leading cause of hospitalization from TBI. Acute subdural hematoma (SDH) is a common intracranial injury that occurs in MVCs associated with high mortality and morbidity rates. In this study, SDH volume and midline shift have been analyzed in order to better understand occupant injury by correlating them to crash and occupant parameters. Fifty-seven head computed tomography (CT) scans were selected from the Crash Injury Research Engineering Network (CIREN) with Abbreviated Injury Scale (AIS) level 3+ SDH. Semi-automated methods were used to isolate the intracranial volume. SDH and additional occupant intracranial injuries were segmented across axial CT images, providing a total SDH injury volume. SDH volume was correlated to crash parameters and occupant characteristics. Results show a positive correlation between SDH volume and crash severity in near-side and frontal crashes. Additionally, the location of the resulting hemorrhage varied by crash type. Those with greater SDH volumes had significantly lower Glasgow Coma Scale (GCS) scores at the crash site in near-side crashes. Age and fracture type were found to be significant contributors to SDH volume. This study is a volumetric analysis of real world brain injuries and known MVC impacts. The results of this study demonstrate a relationship among SDH volume, crash mechanics, and occupant characteristics that provide a better understanding of the injury mechanisms of MVC-associated TBI.

ITS impacts on safety and traffic management : an investigation of secondary crash causes

DOT National Transportation Integrated Search

1999-01-01

In this paper, the authors focus on identifying potential savings from lowering the likelihood of secondary crash occurrences in incidents. Logistic regression models are developed to examine which primary crash characteristics are likely to influenc...

Fatigue-related crashes involving express buses in Malaysia: will the proposed policy of banning the early-hour operation reduce fatigue-related crashes and benefit overall road safety?

PubMed

Mohamed, Norlen; Mohd-Yusoff, Mohammad-Fadhli; Othman, Ilhamah; Zulkipli, Zarir-Hafiz; Osman, Mohd Rasid; Voon, Wong Shaw

2012-03-01

Fatigue-related crashes have long been the topic of discussion and study worldwide. The relationship between fatigue-related crashes and time of day is well documented. In Malaysia, the possibility of banning express buses from operating during the early-hours of the morning has emerged as an important consideration for passenger safety. This paper highlights the findings of an impact assessment study. The study was conducted to determine all possible impacts prior to the government making any decision on the proposed banning. This study is an example of a simple and inexpensive approach that may influence future policy-making process. The impact assessment comprised two major steps. The first step involved profiling existing operation scenarios, gathering information on crashes involving public express buses and stakeholders' views. The second step involved a qualitative impact assessment analysis using all information gathered during the profiling stage to describe the possible impacts. Based on the assessment, the move to ban early-hour operations could possibly result in further negative impacts on the overall road safety agenda. These negative impacts may occur if the fundamental issues, such as driving and working hours, and the need for rest and sleep facilities for drivers, are not addressed. In addition, a safer and more accessible public transportation system as an alternative for those who choose to travel at night would be required. The proposed banning of early-hour operations is also not a feasible solution for sustainability of express bus operations in Malaysia, especially for those operating long journeys. The paper concludes by highlighting the need to design a more holistic approach for preventing fatigue-related crashes involving express buses in Malaysia. Copyright © 2011 Elsevier Ltd. All rights reserved.

Effects of administrative license revocation on employment.

DOT National Transportation Integrated Search

1996-05-01

This project addressed: (1) the impact of administrative license revocation (ALR) on the employment of first and multiple drunk-driving (DUI) offenders, and (2) the impact of alcohol-related crashes on the employment of crash-involved persons (i.e., ...

Reductions in injury crashes associated with red light camera enforcement in oxnard, california.

PubMed

Retting, Richard A; Kyrychenko, Sergey Y

2002-11-01

This study estimated the impact of red light camera enforcement on motor vehicle crashes in one of the first US communities to employ such cameras-Oxnard, California. Crash data were analyzed for Oxnard and for 3 comparison cities. Changes in crash frequencies were compared for Oxnard and control cities and for signalized and nonsignalized intersections by means of a generalized linear regression model. Overall, crashes at signalized intersections throughout Oxnard were reduced by 7% and injury crashes were reduced by 29%. Right-angle crashes, those most associated with red light violations, were reduced by 32%; right-angle crashes involving injuries were reduced by 68%. Because red light cameras can be a permanent component of the transportation infrastructure, crash reductions attributed to camera enforcement should be sustainable.

Child pedestrian anthropometry: evaluation of potential impact points during a crash.

PubMed

Serre, Thierry; Lalys, Loïc; Bartoli, Christophe; Christia-Lotter, Amandine; Leonetti, Georges; Brunet, Christian

2010-11-01

This paper highlights the potential impact points of a child pedestrian during a crash with the front end of a vehicle. Child anthropometry was defined for ages between 3 and 15 years. It was based on the measurement of seven different segment body heights (knee, femur, pelvis, shoulder, neck, chin, vertex) performed on about 2,000 French children. For each dimension, the 5(th), 50(th) and 95(th) percentile values were reported, and the corresponding linear regression lines were given. Then these heights were confronted with three different vehicle shapes, corresponding to a passenger car, a sport utility vehicle and a light truck, to identify impact points. In particular, we show that the thigh is directly hit by the bumper for children above 12 years of age, whereas the head principally impacts the hood. The influence of child anthropometry on the pedestrian trajectory and the comparison with test procedures in regulation are discussed. 2010 Elsevier Ltd. All rights reserved.

Proposed test method for and evaluation of wheelchair seating system (WCSS) crashworthiness.

PubMed

van Roosmalen, L; Bertocci, G; Ha, D R; Karg, P; Szobota, S

2000-01-01

Safety of motor vehicle seats is of great importance in providing crash protection to the occupant. An increasing number of wheelchair users use their wheelchairs as motor vehicle seats when traveling. A voluntary standard requires that compliant wheelchairs be dynamically sled impact tested. However, testing to evaluate the crashworthiness of add-on wheelchair seating systems (WCSS) independent of their wheelchair frame is not addressed by this standard. To address this need, this study developed a method to evaluate the crash-worthiness of WCSS with independent frames. Federal Motor Vehicle Safety Standards (FMVSS) 207 test protocols, used to test the strength of motor vehicle seats, were modified and used to test the strength of three WCSS. Forward and rearward loads were applied at the WCSS center of gravity (CGSS), and a moment was applied at the uppermost point of the seat back. Each of the three tested WCSS met the strength requirements of FMVSS 207. Wheelchair seat-back stiffness was also investigated and compared to motor vehicle seat-back stiffness.

Pre-crash scenarios at road junctions: A clustering method for car crash data.

PubMed

Nitsche, Philippe; Thomas, Pete; Stuetz, Rainer; Welsh, Ruth

2017-10-01

Given the recent advancements in autonomous driving functions, one of the main challenges is safe and efficient operation in complex traffic situations such as road junctions. There is a need for comprehensive testing, either in virtual simulation environments or on real-world test tracks. This paper presents a novel data analysis method including the preparation, analysis and visualization of car crash data, to identify the critical pre-crash scenarios at T- and four-legged junctions as a basis for testing the safety of automated driving systems. The presented method employs k-medoids to cluster historical junction crash data into distinct partitions and then applies the association rules algorithm to each cluster to specify the driving scenarios in more detail. The dataset used consists of 1056 junction crashes in the UK, which were exported from the in-depth "On-the-Spot" database. The study resulted in thirteen crash clusters for T-junctions, and six crash clusters for crossroads. Association rules revealed common crash characteristics, which were the basis for the scenario descriptions. The results support existing findings on road junction accidents and provide benchmark situations for safety performance tests in order to reduce the possible number parameter combinations. Copyright © 2017 Elsevier Ltd. All rights reserved.

Real World Crash Evaluation of Vehicle Stability Control (VSC) Technology

PubMed Central

Bahouth, G.

2005-01-01

This study quantifies the effect of Vehicle Stability Control (VSC) in reducing crash involvement rates for a subset of vehicles in the US fleet. Crash rates for a variety of impact types before and after VSC technology was implemented are compared. Police-reported crashes from six available US state files from 1998–2002 were analyzed including 13,987 crash-involved study vehicles not equipped with the technology and 5,671 crashes of vehicles equipped with VSC as a standard feature. Overall, an 11.2% (95% CI: 2.4%, 21.1%) reduction in multi-vehicle frontal crash involvement was identified for VSC-equipped vehicles. A 52.6% (95% CI: 42.5%, 62.7%) reduction in single-vehicle crash rates was found. PMID:16179137

Real world crash evaluation of vehicle stability control (VSC) technology.

PubMed

Bahouth, G

2005-01-01

This study quantifies the effect of Vehicle Stability Control (VSC) in reducing crash involvement rates for a subset of vehicles in the US fleet. Crash rates for a variety of impact types before and after VSC technology was implemented are compared. Police-reported crashes from six available US state files from 1998-2002 were analyzed including 13,987 crash-involved study vehicles not equipped with the technology and 5,671 crashes of vehicles equipped with VSC as a standard feature. Overall, an 11.2% (95% CI: 2.4%, 21.1%) reduction in multi-vehicle frontal crash involvement was identified for VSC-equipped vehicles. A 52.6% (95% CI: 42.5%, 62.7%) reduction in single-vehicle crash rates was found.

All-terrain vehicles (ATVs) on the road: a serious traffic safety and public health concern.

PubMed

Denning, Gerene; Jennissen, Charles; Harland, Karisa; Ellis, David; Buresh, Christopher

2013-01-01

On-road all-terrain vehicle (ATV) crashes are frequent occurrences that disproportionately impact rural communities. These crashes occur despite most states having laws restricting on-road ATV use. A number of overall risk factors for ATV-related injuries have been identified (e.g., lack of helmet, carrying passengers). However, few studies have determined the relative contribution of these and other factors to on-road crashes and injuries. The objective of our study was to determine whether there were differences between on- and off-road ATV crashes in their demographics and/or mechanisms and outcomes of injuries. Data were derived from our statewide ATV injury surveillance database (2002-2009). Crash location and crash and injury mechanisms were coded using a modification of the Department of Transportation (DOT) coding system. Descriptive analyses and statistical comparisons (chi-square test) of variables were performed. Multivariate logistic regression analysis was used to determine relative risk. 976 records were included in the final analysis, with 38 percent of the injured individuals from on-road crashes. Demographics were similar for crashes at each location, with approximately 80 percent males, 30 percent under the age of 16, and 15 percent passengers. However, females and youths under 16 were over 4 times more likely to be passengers (P ≤ 0.0001), regardless of crash location. Compared to those off-road, on-road crash victims were approximately 10 times more likely to be involved in a vehicle-vehicle collision (P < 0.001), 3 times more likely to have a severe brain injury (P < 0.001), and twice as likely to have suffered major trauma (P < 0.001). Adult operators in on-road crashes were also twice as likely to test positive for alcohol as those off-road (P < 0.05). Helmet use significantly reduced the odds of sustaining a brain injury and on-road victims were only half as likely to be helmeted (P < 0.01). More than 1 in 3 on-road crashes involved a collision with another vehicle, suggesting that ATVs on the road represent a potential traffic safety concern. Of note, helmets were associated with reduced risk for the number and severity of brain injuries, providing further support for the importance of helmet use. Finally, even controlling for helmet use, on-road crash victims suffered more major trauma and severe brain injuries than those off-road. Overall, our data reinforce the importance of laws restricting ATV road use and the need for effective enforcement, as well as the need to increase user education about ATV road-use laws and the dangers of riding on the roads.

Evaluation of Chest Injury Mechanisms in Nearside Oblique Frontal Impacts

PubMed Central

Iraeus, Johan; Lindquist, Mats; Wistrand, Sofie; Sibgård, Elin; Pipkorn, Bengt

2013-01-01

Despite the use of seat belts and modern safety systems, many automobile occupants are still seriously injured or killed in car crashes. Common configurations in these crashes are oblique and small overlap frontal impacts that often lead to chest injuries. To evaluate the injury mechanism in these oblique impacts, an investigation was carried out using mathematical human body model simulations. A model of a simplified vehicle interior was developed and validated by means of mechanical sled tests with the Hybrid III dummy. The interior model was then combined with the human body model THUMS and validated by means of mechanical PMHS sled tests. Occupant kinematics as well as rib fracture patterns were predicted with reasonable accuracy. The final model was updated to conform to modern cars and a simulation matrix was run. In this matrix the boundary conditions, ΔV and PDOF, were varied and rib fracture risk as a function of the boundary conditions was evaluated using a statistical framework. In oblique frontal impacts, two injury producing mechanisms were found; (i) diagonal belt load and (ii) side structure impact. The second injury mechanism was found for PDOFs of 25°–35°, depending on ΔV. This means that for larger PDOFs, less ΔV is needed to cause a serious chest injury. PMID:24406957

Impact of traffic oscillations on freeway crash occurrences.

PubMed

Zheng, Zuduo; Ahn, Soyoung; Monsere, Christopher M

2010-03-01

Traffic oscillations are typical features of congested traffic flow that are characterized by recurring decelerations followed by accelerations (stop-and-go driving). The negative environmental impacts of these oscillations are widely accepted, but their impact on traffic safety has been debated. This paper describes the impact of freeway traffic oscillations on traffic safety. This study employs a matched case-control design using high-resolution traffic and crash data from a freeway segment. Traffic conditions prior to each crash were taken as cases, while traffic conditions during the same periods on days without crashes were taken as controls. These were also matched by presence of congestion, geometry and weather. A total of 82 cases and about 80,000 candidate controls were extracted from more than three years of data from 2004 to 2007. Conditional logistic regression models were developed based on the case-control samples. To verify consistency in the results, 20 different sets of controls were randomly extracted from the candidate pool for varying control-case ratios. The results reveal that the standard deviation of speed (thus, oscillations) is a significant variable, with an average odds ratio of about 1.08. This implies that the likelihood of a (rear-end) crash increases by about 8% with an additional unit increase in the standard deviation of speed. The average traffic states prior to crashes were less significant than the speed variations in congestion. Published by Elsevier Ltd.

A Bayesian assessment of the effect of highway bypasses in Iowa on crashes and crash rate.

PubMed

Cena, Lorenzo G; Keren, Nir; Li, Wen; Carriquiry, Alicia L; Pawlovich, Michael D; Freeman, Steven A

2011-08-01

A common contention is that the construction of highway bypasses negatively impacts the economy of local communities by reducing pass-by traffic for businesses. However, as access to specific business' account records is limited, this impact is difficult to quantify. Another common contention is that bypasses contribute to a reduction in overall crashes in the community and in the surrounding areas. Even though a large number of bypasses have been constructed in the State of Iowa over the past several years, their actual impact in terms of traffic safety has not been quantified. This study seeks answers to the following questions: (a) Are bypasses in Iowa associated with a reduction in crash frequencies and crash rates on the bypassed highway? (b) Do bypasses in Iowa introduce a reduction of overall crash frequencies and rates or do they merely shift crashes from the highways through the communities to the bypasses with no significant overall reduction? We obtained crash information from the Iowa DOT at 19 sites on which a bypass was constructed sometime during the past 23 years. We also obtained the same information at six sites used as comparison sites on which no bypasses were constructed at least until 2005. We them employed a Bayesian approach to estimating the association between the construction of the bypass and crash rates, while also accounting for other factors. The construction of bypasses in Iowa is associated with a significant increase in traffic safety both on the main road through town and on the combined main road and bypass roadway. Copyright © 2011 National Safety Council and Elsevier Ltd. All rights reserved.

Prevalence and characteristics of road traffic injuries among young drivers in Oman, 2009-2011.

PubMed

Al Reesi, Hamed; Al Maniri, Abdullah; Adawi, Samir Al; Davey, Jeremy; Armstrong, Kerry; Edwards, Jason

2016-07-03

Studies from different parts of the world have indicated that the impact of road traffic incidents disproportionally affects young adults. Few known studies have been forthcoming from Arabian Gulf countries. Within Oman, a high proportion of the population is under the age of 20. Coupled with the drastic increase in motorization in recent years, there is a need to understand the state of road safety among young people in Oman. The current research aimed to explore the prevalence and characteristics of road traffic injuries among young drivers aged 17-25 years. Crash data from 2009 to 2011 were extracted from the Directorate General of Traffic, Royal Oman Police (ROP) database in Oman. The data were analyzed to explore the impact of road crashes on young people (17-25 years), the characteristics of young driver crashes, and how these differ from older drivers and to identify key predictors of fatalities in young driver crashes. Overall, young people were overrepresented in injuries and fatalities within the sample time period. Though it is true that many young people in crashes were driving at the time, it was also evident that young people were often victims in a crash caused by someone else. Thus, to reduce the impact of road crashes on young people, there is a need to generally address road safety within Oman. When young drivers were involved in crashes they were predominantly male. The types of crashes these drivers have can be broadly attributed to risk taking and inexperience. Speeding and nighttime driving were the key risk factors for fatalities. The results highlight the need to address young driver safety in Oman. From these findings, the introduction of a graduated driver licensing system with nighttime driving restrictions could significantly improve young driver safety.

49 CFR 563.10 - Crash test performance and survivability.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 6 2011-10-01 2011-10-01 false Crash test performance and survivability. 563.10 Section 563.10 Transportation Other Regulations Relating to Transportation (Continued) NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION EVENT DATA RECORDERS § 563.10 Crash test performance and survivability. (a) Each...

Crash test ratings and real-world frontal crash outcomes: a CIREN study.

PubMed

Ryb, Gabriel E; Burch, Cynthia; Kerns, Timothy; Dischinger, Patricia C; Ho, Shiu

2010-05-01

To establish whether the Insurance Institute for Highway Safety (IIHS) offset crash test ratings are linked to different mortality rates in real world frontal crashes. The study used Crash Injury Research Engineering Network drivers of age older than 15 years who were involved in frontal crashes. The Crash Injury Research Engineering Network is a convenience sample of persons injured in crashes with at least one Abbreviated Injury Scale score of 3+ injury or two Abbreviated Injury Scale score of 2+ injuries who were either treated at a Level I trauma center or died. Cases were grouped by IIHS crash test ratings (i.e., good, acceptable, marginal, poor, and not rated). Those rated marginal were excluded because of their small numbers. Mortality rates experienced by these ratings-based groups were compared using the Mantel-Haenszel chi test. Multiple logistic regression models were built to adjust for confounders (i.e., occupant, vehicular, and crash factors). A total of 1,226 cases were distributed within not rated (59%), poor (12%), average (16%), and good (14%) categories. Those rated good and average experienced a lower unadjusted mortality rate. After adjustment by confounders, those in vehicles rated good experienced a lower risk of death (adjusted OR 0.38 [0.16-0.90]) than those in vehicles rated poor. There was no significant effect for "acceptable" rating. Other factors influencing the occurrence of death were age, DeltaV >or=70 km/h, high body mass index, and lack of restraint use. After adjusting for occupant, vehicular, and crash factors, drivers of vehicles rated good by the IIHS experienced a lower risk of death in frontal crashes.

The economic impact of motor vehicle crashes, 2000

DOT National Transportation Integrated Search

2002-05-01

This report presents the results of an analysis of motor vehicle crash costs in the United State in the year 2000. The total economic cost of motor vehicle crashes in 2000 was $230.6 billion. This represents the present value of lifetime costs for 41...

Cervical and thoracic spine injury from interactions with vehicle roofs in pure rollover crashes.

PubMed

Bambach, M R; Grzebieta, R H; McIntosh, A S; Mattos, G A

2013-01-01

Around one third of serious injuries sustained by belted, non-ejected occupants in pure rollover crashes occur to the spine. Dynamic rollover crash test methodologies have been established in Australia and the United States, with the aims of understanding injury potential in rollovers and establishing the basis of an occupant rollover protection crashworthiness test protocol that could be adopted by consumer new car assessment programmes and government regulators internationally. However, for any proposed test protocol to be effective in reducing the high trauma burden resulting from rollover crashes, appropriate anthropomorphic devices that replicate real-world injury mechanisms and biomechanical loads are required. To date, consensus regarding the combination of anthropomorphic device and neck injury criteria for rollover crash tests has not been reached. The aim of the present study is to provide new information pertaining to the nature and mechanisms of spine injury in pure rollover crashes, and to assist in the assessment of spine injury potential in rollover crash tests. Real-world spine injury cases that resulted from pure rollover crashes in the United States between 2000 and 2009 are identified, and compared with cadaver experiments under vertical load by other authors. The analysis is restricted to contained, restrained occupants that were injured from contact with the vehicle roof structure during a pure rollover, and the role of roof intrusion in creating potential for spine injury is assessed. Recommendations for assessing the potential for spine injury in rollover occupant protection crash test protocols are made. Copyright © 2012 Elsevier Ltd. All rights reserved.

A new method for predicting crashworthiness.

PubMed

Council, F M; Stewart, J R; Cox, C L

1997-01-01

Consumer information concerning the predicted 'safeness' of a new car model is based on the results of crash tests. Unfortunately, because it allows comparisons only within size/weight groups, the information is somewhat incompatible with the normal car-purchase decision process since consumers often consider cars within different groups. In addition, based on past research, the association of the crash-test information with real-world crash outcomes is, at best, somewhat limited. The goal of this study was to explore a methodology for improving this information, a methodology which incorporates not only the crash-test information, but also information concerning real-world occupant injury experience in prior crashes involving similar vehicles ('clones'). The clone information included both driver injury severity in past clone crashes from the North Carolina accident file and various indicators of relative driver injury in clones extracted from published insurance-related data from the Highway Loss Data Institute (HLDI). Final models developed included both measures of the Head Index Criteria (HIC) from the crash test and some measure of clone performances as significant predictors. While the North Carolina clone data is intuitively 'cleaner' in that it describes injury level per crash rather than per insured year, the medical claims indices from the HLDI data consistently were shown to be the stronger predictors. Future research will need to look at ways of better combining the crash-test variables and of possible modifications to the HLDI indices. In general, the analyses generated encouraging results that appear to point to possible improvements in the crashworthiness information.

Performance Evaluation of Child Safety Seats in Far-Side Lateral Sled Tests at Varying Speeds

PubMed Central

Ghati, Yoganand; Menon, Rajiv A.; Milone, Mary; Lankarani, Hamid; Oliveres, Gerardo

2009-01-01

Protection of children in Child Safety Seats (CSS) in side impact crashes has been a topic of recent studies. The objective of this study was to evaluate the performance of CSS in far-side impacts through a series of sled tests conducted at varying test speeds. Forty eight sled tests were conducted at three speeds (24 km/h, 29 km/h and 36 km/h), under two different CSS attachment conditions (LATCH and seat belt attached), using rear facing and forward facing CSS from four different manufacturers. Analyses were conducted to examine head retention within the CSS, velocity of the head as it passes an imaginary plane (cross over into other occupant space or door), lateral trajectory of the head and knee; head, chest and pelvis accelerations; neck and lumbar loads and moments. In addition to these parameters, the CSS were visually inspected for structural integrity after each test. Results from these sled tests highlighted the differential performance of CSS in far-side impacts. During the tests, all CSS experienced significant lateral movement irrespective of attachment type. In rear facing CSS tests, one of the designs failed as the seat disengaged from its base. In forward facing CSS tests, it was observed that the seat belt attached CSS experienced less rotational motion than the LATCH attached CSS. ATD head retention within the seat was not achieved with either CSS attachments at any speed. The findings from this study augment the current efforts to define regulatory sled setup procedure for far-side impact crashes involving children in CSS, which currently does not exist and will eventually further the protection of children in automobiles. PMID:20184846

49 CFR Appendix A to Subpart U of... - Figures

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 7 2014-10-01 2014-10-01 false Figures A Appendix A to Subpart U of Part 572 Transportation Other Regulations Relating to Transportation (Continued) NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) ANTHROPOMORPHIC TEST DEVICES ES-2re Side Impact Crash...

49 CFR Appendix A to Subpart U of... - Figures

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 7 2013-10-01 2013-10-01 false Figures A Appendix A to Subpart U of Part 572 Transportation Other Regulations Relating to Transportation (Continued) NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) ANTHROPOMORPHIC TEST DEVICES ES-2re Side Impact Crash...

Crash testing of Louisiana's 3 1/2" diameter multi-directional, single steel post, small sign support : final report.

DOT National Transportation Integrated Search

1993-03-01

The Louisiana Department of Transportation and Development (LDOTD) contracted with the Texas Transportation Institute (TTI) to evaluate the impact characteristics of Louisiana's multi-directional, 8.9 cm (3-1/2 in) diameter steel post, small sigh sup...

Comparison of crash rates and rear-end striking crashes among novice teens and experienced adults using the SHRP2 Naturalistic Driving Study.

PubMed

Seacrist, Thomas; Belwadi, Aditya; Prabahar, Abhiti; Chamberlain, Samuel; Megariotis, James; Loeb, Helen

2016-09-01

Motor vehicle crashes are the leading cause of death for teens. Previous teen and adult crash rates have been based upon fatal crashes, police-reported crashes, and estimated miles driven. Large-scale naturalistic driving studies offer the opportunity to compute crash rates using a reliable methodology to capture crashes and driving exposure. The Strategic Highway Research Program 2 (SHRP2) Naturalistic Driving Study contains extensive real-world data on teen and adult driving. This article presents findings on the crash rates of novice teen and experienced adult drivers in naturalistic crashes. A subset from the SHRP2 database consisting of 539 crash events for novice teens (16-19 years, n = 549) and experienced adults (35-54 years, n = 591) was used. Onboard instrumentation such as scene cameras, accelerometers, and Global Positioning System logged time series data at 10 Hz. Scene videos were reviewed for all events to identify rear-end striking crashes. Dynamic variables such as acceleration and velocity were analyzed for rear-end striking events. Number of crashes, crash rates, rear-end striking crash severity, and rear-end striking impact velocity were compared between novice teens and experienced adults. Video review of the SHRP2 crashes identified significantly more crashes (P < 0.01) and rear-end striking crashes (P < 0.01) among the teen group than among the adult group. This yielded crash rates of 30.0 crashes per million miles driven for novice teens compared to 5.3 crashes per million miles driven for experienced adults. The crash rate ratio for teens vs. adults was 5.7. The rear-end striking crash rate was 13.5 and 1.8 per million miles driven for novice teens and experienced adults, respectively. The rear-end striking crash rate ratio for teens vs. adults was 7.5. The rear-end striking crash severity measured by the accelerometers was greater (P < 0.05) for the teen group (1.8 ± 0.9 g; median = 1.6 g) than for the adult group (1.1 ± 0.4 g; median = 1.0 g), suggesting that teen crashes tend to be more serious than adult crashes. Increased rear-end striking impact velocity (P < 0.01) was also observed for novice teens (18.8 ± 13.2 mph; median = 18.9 mph) compared to experienced adults (3.3 ± 1.2 mph; median = 2.8 mph). To our knowledge, this is the first study to compare crash rates between teens and adults using a large-scale naturalistic driving database. Unlike previous crash rates, the reported rates reliably control for crash type and driving exposure. These results conform to previous findings that novice teens exhibit increased crash rates compared to experienced adults.

Cross-correlation between the controlled collision environment and real-world motor vehicle collisions: Evaluating the protection of the thoracic side airbag.

PubMed

Gaylor, Luke; Junge, Mirko; Abanteriba, Sylvester

2018-05-19

Thoracic side airbags (tSABs) were integrated into the vehicle fleet to attenuate and distribute forces on the occupant's chest and abdomen, dissipate the impact energy, and move the occupant away from the intruding structure, all of which reduce the risk of injury. This research piece investigates and evaluates the safety performance of the airbag unit by cross-correlating data from a controlled collision environment with field data. We focus exclusively on vehicle-vehicle lateral impacts from the NHTSA's Vehicle Crash Test Database and NASS-CDS database, which are replicated in the controlled environment by the (crabbed) barrier impact. Similar collisions with and without seat-embedded tSABs are matched to each other and the injury risks are compared. Results indicated that dummy-based thoracic injury metrics were significantly lower with tSAB exposure (P <.001). Yet, when the controlled collision environment data were cross-correlated with NASS-CDS collisions, deployment of the tSAB indicated no association with thoracic injury (tho. MAIS 2+ unadjusted relative risk [RR] = 1.14; 90% confidence interval [CI], 0.80-1.62; tho. MAIS 3+ unadjusted RR = 1.12; 90% CI, 0.76-1.65). The data from the controlled collision environment indicated an unequivocal benefit provided by the thoracic side airbag for the crash dummy; however, the real-world collisions demonstrate that no benefit is provided to the occupant. This has resulted from a noncorrelation between the crash test/dummy-based design taking the abstracting process too far to represent the real-world collision scenario.

Aircraft Crash Survival Design Guide. Volume 2. Aircraft Crash Environment and Human Tolerance

DTIC Science & Technology

1980-01-01

anthropometry , and crash test dummies, all of which serves as background for the design information presented in the other volumes. .I / V. L...Aeromedical Institute furnished assistance in locat- ing recent information on human tolerance, anthropometry , and crash test dummies. .3 TABLE OF CONTENTS...83 6.1 INTRODUCTION . . . . . . .. ..... 83 6.2 ANTHROPOMETRY . . . . . . 83 6.2.1 Conventional Anthropometric Measurements

14 CFR 27.952 - Fuel system crash resistance.

Code of Federal Regulations, 2010 CFR

2010-01-01

... AIRCRAFT AIRWORTHINESS STANDARDS: NORMAL CATEGORY ROTORCRAFT Powerplant Fuel System § 27.952 Fuel system... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Fuel system crash resistance. 27.952... of fuel fires to occupants following an otherwise survivable impact (crash landing), the fuel systems...

14 CFR 27.952 - Fuel system crash resistance.

Code of Federal Regulations, 2012 CFR

2012-01-01

... AIRCRAFT AIRWORTHINESS STANDARDS: NORMAL CATEGORY ROTORCRAFT Powerplant Fuel System § 27.952 Fuel system... 14 Aeronautics and Space 1 2012-01-01 2012-01-01 false Fuel system crash resistance. 27.952... of fuel fires to occupants following an otherwise survivable impact (crash landing), the fuel systems...

14 CFR 27.952 - Fuel system crash resistance.

Code of Federal Regulations, 2014 CFR

2014-01-01

... AIRCRAFT AIRWORTHINESS STANDARDS: NORMAL CATEGORY ROTORCRAFT Powerplant Fuel System § 27.952 Fuel system... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Fuel system crash resistance. 27.952... of fuel fires to occupants following an otherwise survivable impact (crash landing), the fuel systems...

14 CFR 29.952 - Fuel system crash resistance.

Code of Federal Regulations, 2010 CFR

2010-01-01

... AIRCRAFT AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Powerplant Fuel System § 29.952 Fuel system... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Fuel system crash resistance. 29.952... of fuel fires to occupants following an otherwise survivable impact (crash landing), the fuel systems...

14 CFR 29.952 - Fuel system crash resistance.

Code of Federal Regulations, 2012 CFR

2012-01-01

... AIRCRAFT AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Powerplant Fuel System § 29.952 Fuel system... 14 Aeronautics and Space 1 2012-01-01 2012-01-01 false Fuel system crash resistance. 29.952... of fuel fires to occupants following an otherwise survivable impact (crash landing), the fuel systems...

14 CFR 29.952 - Fuel system crash resistance.

Code of Federal Regulations, 2011 CFR

2011-01-01

... AIRCRAFT AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Powerplant Fuel System § 29.952 Fuel system... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Fuel system crash resistance. 29.952... of fuel fires to occupants following an otherwise survivable impact (crash landing), the fuel systems...

14 CFR 29.952 - Fuel system crash resistance.

Code of Federal Regulations, 2013 CFR

2013-01-01

... AIRCRAFT AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Powerplant Fuel System § 29.952 Fuel system... 14 Aeronautics and Space 1 2013-01-01 2013-01-01 false Fuel system crash resistance. 29.952... of fuel fires to occupants following an otherwise survivable impact (crash landing), the fuel systems...

14 CFR 29.952 - Fuel system crash resistance.

Code of Federal Regulations, 2014 CFR

2014-01-01

... AIRCRAFT AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Powerplant Fuel System § 29.952 Fuel system... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Fuel system crash resistance. 29.952... of fuel fires to occupants following an otherwise survivable impact (crash landing), the fuel systems...

14 CFR 27.952 - Fuel system crash resistance.

Code of Federal Regulations, 2013 CFR

2013-01-01

... AIRCRAFT AIRWORTHINESS STANDARDS: NORMAL CATEGORY ROTORCRAFT Powerplant Fuel System § 27.952 Fuel system... 14 Aeronautics and Space 1 2013-01-01 2013-01-01 false Fuel system crash resistance. 27.952... of fuel fires to occupants following an otherwise survivable impact (crash landing), the fuel systems...

14 CFR 27.952 - Fuel system crash resistance.

Code of Federal Regulations, 2011 CFR

2011-01-01

... AIRCRAFT AIRWORTHINESS STANDARDS: NORMAL CATEGORY ROTORCRAFT Powerplant Fuel System § 27.952 Fuel system... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Fuel system crash resistance. 27.952... of fuel fires to occupants following an otherwise survivable impact (crash landing), the fuel systems...

Improving emergency response to motor vehicle crashes : the role of multi-media information.

DOT National Transportation Integrated Search

2013-10-01

The motivation for this study is to reduce the adverse impacts of trauma caused by motor vehicle crash (MVC), including rural regions, where crashes account for a high percentage of trauma injury and death. One key aspect of reducing adverse effects ...

Truck sideguards for Vision Zero : review and technical recommendations for Safe Fleet Transition Plan pilot deployment.

DOT National Transportation Integrated Search

2014-12-01

Large truck crashes are more likely to result in a pedestrian or bicyclist fatality than crashes involving passenger vehicles and are more likely to be side-impact crashes. Sideguards are vehicle-based safety devices that help prevent pedestrians and...

The impact of medicinal drugs on traffic safety: a systematic review of epidemiological studies.

PubMed

Orriols, Ludivine; Salmi, Louis-Rachid; Philip, Pierre; Moore, Nicholas; Delorme, Bernard; Castot, Anne; Lagarde, Emmanuel

2009-08-01

To evaluate the quality of epidemiological research into effects of medicinal drugs on traffic safety and the current knowledge in this area. The bibliographic search was done in Medline electronic database using the keywords: ((accident* or crash*) and traffic and drug*) leading to 1141 references. Additional references were retrieved from the Safetylit website and the reference lists of selected studies. Original articles published in English or French, between 1 April 1979 and 31 July 2008, were considered for inclusion. We excluded descriptive studies, studies limited to alcohol or illicit drug involvement and investigations of injuries other than from traffic crashes. Studies based on laboratory tests, driving simulators or on-the-road driving tests were also excluded. Eligible studies had to evaluate the causal relationship between the use of medicinal drugs and the risk of traffic crashes. Study quality was assessed by two independent experts, according to a grid adapted from the strengthening the reporting of observational studies in epidemiology (STROBE) statement. Twenty two studies of variable methodological quality were included. Definition of drug exposure varied across studies and depended on the data sources. Potential confounding due to the interaction between the effects of the medicinal drug and disease-related symptoms was often not controlled. The risk of motor-vehicle crashes related to benzodiazepines has been amply studied and demonstrated. Results for other medicinal drugs remain controversial. There is a need for large studies, investigating the role of individual substances in the risk of road traffic crashes. Copyright 2009 John Wiley & Sons, Ltd.

Definition of run-off-road crash clusters-For safety benefit estimation and driver assistance development.

PubMed

Nilsson, Daniel; Lindman, Magdalena; Victor, Trent; Dozza, Marco

2018-04-01

Single-vehicle run-off-road crashes are a major traffic safety concern, as they are associated with a high proportion of fatal outcomes. In addressing run-off-road crashes, the development and evaluation of advanced driver assistance systems requires test scenarios that are representative of the variability found in real-world crashes. We apply hierarchical agglomerative cluster analysis to define similarities in a set of crash data variables, these clusters can then be used as the basis in test scenario development. Out of 13 clusters, nine test scenarios are derived, corresponding to crashes characterised by: drivers drifting off the road in daytime and night-time, high speed departures, high-angle departures on narrow roads, highways, snowy roads, loss-of-control on wet roadways, sharp curves, and high speeds on roads with severe road surface conditions. In addition, each cluster was analysed with respect to crash variables related to the crash cause and reason for the unintended lane departure. The study shows that cluster analysis of representative data provides a statistically based method to identify relevant properties for run-off-road test scenarios. This was done to support development of vehicle-based run-off-road countermeasures and driver behaviour models used in virtual testing. Future studies should use driver behaviour from naturalistic driving data to further define how test-scenarios and behavioural causation mechanisms should be included. Copyright © 2018 Elsevier Ltd. All rights reserved.

Hotspots and causes of motor vehicle crashes in Baltimore, Maryland: A geospatial analysis of five years of police crash and census data

PubMed Central

Dezman, Zachary; de Andrade, Luciano; Vissoci, Joao Ricardo; El-Gabri, Deena; Johnson, Abree; Hirshon, Jon Mark; Staton, Catherine A.

2017-01-01

Introduction Road traffic injuries are a leading killer of youth (aged 15–29) and are projected to be the 7th leading cause of death by 2030. To better understand road traffic crash locations and characteristics in the city of Baltimore, we used police and census data, to describe the epidemiology, hotspots, and modifiable risk factors involved to guide further interventions. Materials and methods Data on all crashes in Baltimore City from 2009 to 2013 were made available from the Maryland Automated Accident Reporting System. Socioeconomic data collected by the US CENSUS 2010 were obtained. A time series analysis was conducted using an ARIMA model. We analyzed the geographical distribution of traffic crashes and hotspots using exploratory spatial data analysis and spatial autocorrelation. Spatial regression was performed to evaluate the impact of socioeconomic indicators on hotspots. Results In Baltimore City, between 2009 and 2013, there were a total of 100,110 crashes reported, with 1% of crashes considered severe. Of all crashes, 7% involved vulnerable road users and 12% had elderly or youth involvement. Reasons for crashes included: distracted driving (31%), speeding (6%), and alcohol or drug use (5%). After 2010, we observed an increasing trend in all crashes especially from March to June. Distracted driving then youth and elderly drivers were consistently the highest risk factors over time. Multivariate spatial regression model including socioeconomic indicators and controlling for age, gender and population size did not show a distinct predictor of crashes explaining only 20% of the road crash variability, indicating crashes are not geographically explained by socioeconomic indicators alone. Conclusion In Baltimore City, road traffic crashes occurred predominantly in the high density center of the city, involved distracted driving and extremes of age with an increase in crashes from March to June. There was no association between socioeconomic variables where crashes occurred and hotspots. In depth analysis of how modifiable risk factors are impacted by geospatial characteristics and the built environment is warranted in Baltimore to tailor interventions. PMID:27614672

Hotspots and causes of motor vehicle crashes in Baltimore, Maryland: A geospatial analysis of five years of police crash and census data.

PubMed

Dezman, Zachary; de Andrade, Luciano; Vissoci, Joao Ricardo; El-Gabri, Deena; Johnson, Abree; Hirshon, Jon Mark; Staton, Catherine A

2016-11-01

Road traffic injuries are a leading killer of youth (aged 15-29) and are projected to be the 7th leading cause of death by 2030. To better understand road traffic crash locations and characteristics in the city of Baltimore, we used police and census data, to describe the epidemiology, hotspots, and modifiable risk factors involved to guide further interventions. Data on all crashes in Baltimore City from 2009 to 2013 were made available from the Maryland Automated Accident Reporting System. Socioeconomic data collected by the US CENSUS 2010 were obtained. A time series analysis was conducted using an ARIMA model. We analyzed the geographical distribution of traffic crashes and hotspots using exploratory spatial data analysis and spatial autocorrelation. Spatial regression was performed to evaluate the impact of socioeconomic indicators on hotspots. In Baltimore City, between 2009 and 2013, there were a total of 100,110 crashes reported, with 1% of crashes considered severe. Of all crashes, 7% involved vulnerable road users and 12% had elderly or youth involvement. Reasons for crashes included: distracted driving (31%), speeding (6%), and alcohol or drug use (5%). After 2010, we observed an increasing trend in all crashes especially from March to June. Distracted driving then youth and elderly drivers were consistently the highest risk factors over time. Multivariate spatial regression model including socioeconomic indicators and controlling for age, gender and population size did not show a distinct predictor of crashes explaining only 20% of the road crash variability, indicating crashes are not geographically explained by socioeconomic indicators alone. In Baltimore City, road traffic crashes occurred predominantly in the high density center of the city, involved distracted driving and extremes of age with an increase in crashes from March to June. There was no association between socioeconomic variables where crashes occurred and hotspots. In depth analysis of how modifiable risk factors are impacted by geospatial characteristics and the built environment is warranted in Baltimore to tailor interventions. Copyright © 2016 Elsevier Ltd. All rights reserved.

Roadside tree/pole crash barrier field test

NASA Technical Reports Server (NTRS)

Wilson, A. H.

1979-01-01

A series of tests was carried out to evaluate the performance of a crash barrier designed to protect the occupants of an automobile from serious injury. The JPL barrier design is a configuration of empty aluminum beverage cans contained in a tear-resistant bag which, in turn, is encased in a collapsible container made of plywood and steel. Tests were conducted with a driven vehicle impacting the barrier. The basic requirements of NCHRP Report 153 were followed except that speeds of 30 mph rather than 60 mph were used. Accelerometer readings on the driver's helmet showed that the driver was never subjected to dangerous decelerations, and never experienced more than temporary discomfort. Also, all of the requirements of the cited report were met. An extrapolation of data indicated that the JPL barrier installed in front of a tree or telephone pole along a roadside would also have met the requirements at a speed of 40 mph.

Evaluating the road safety effects of a fuel cost increase measure by means of zonal crash prediction modeling.

PubMed

Pirdavani, Ali; Brijs, Tom; Bellemans, Tom; Kochan, Bruno; Wets, Geert

2013-01-01

Travel demand management (TDM) consists of a variety of policy measures that affect the transportation system's effectiveness by changing travel behavior. The primary objective to implement such TDM strategies is not to improve traffic safety, although their impact on traffic safety should not be neglected. The main purpose of this study is to evaluate the traffic safety impact of conducting a fuel-cost increase scenario (i.e. increasing the fuel price by 20%) in Flanders, Belgium. Since TDM strategies are usually conducted at an aggregate level, crash prediction models (CPMs) should also be developed at a geographically aggregated level. Therefore zonal crash prediction models (ZCPMs) are considered to present the association between observed crashes in each zone and a set of predictor variables. To this end, an activity-based transportation model framework is applied to produce exposure metrics which will be used in prediction models. This allows us to conduct a more detailed and reliable assessment while TDM strategies are inherently modeled in the activity-based models unlike traditional models in which the impact of TDM strategies are assumed. The crash data used in this study consist of fatal and injury crashes observed between 2004 and 2007. The network and socio-demographic variables are also collected from other sources. In this study, different ZCPMs are developed to predict the number of injury crashes (NOCs) (disaggregated by different severity levels and crash types) for both the null and the fuel-cost increase scenario. The results show a considerable traffic safety benefit of conducting the fuel-cost increase scenario apart from its impact on the reduction of the total vehicle kilometers traveled (VKT). A 20% increase in fuel price is predicted to reduce the annual VKT by 5.02 billion (11.57% of the total annual VKT in Flanders), which causes the total NOCs to decline by 2.83%. Copyright © 2012 Elsevier Ltd. All rights reserved.

Effect of Increased Rear Row Occupancy on Injury to Seat Belt Restrained Children in Side Impact Crashes

PubMed Central

Maltese, Matthew R.; Chen, Irene G.; Arbogast, Kristy B.

2005-01-01

Previous work identified a similar risk of injury for children seated on the struck side and center rear in side impact crashes in passenger cars. In order to further explain this finding, we investigated the effect of sharing the rear row with other occupants on injury risk and delineated differences in injury patterns among the seat positions. These analyses, conducted from a large child specific crash surveillance system, included: children 4–15 years old, rear seated, seat belt restrained, in a passenger car, and in a side impact crash. Injury risk was compared among each rear seat position stratified by the presence of other occupants on the rear row. Occupants are at an increased risk of injury if they sit alone on their row as compared to sitting with other occupants. Patterns of injuries distinct to each seat position were delineated. PMID:16179151

Crash test and evaluation of temporary wood sign support system for large guide signs.

DOT National Transportation Integrated Search

2016-07-01

The objective of this research task was to evaluate the impact performance of a temporary wood sign support : system for large guide signs. It was desired to use existing TxDOT sign hardware in the design to the extent possible. : The full-scale cras...

A crush zone design for an existing passenger rail cab car

DOT National Transportation Integrated Search

2005-11-05

A Crash Energy Management (CEM) cab car crush zone : design has been developed for retrofit onto an existing Budd : M1 cab car. This design is to be used in the upcoming fullscale : train-to-train test of a CEM consist impacting a standing : freight ...

49 CFR 572.140 - Incorporation by reference.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Child Crash Test Dummy, Alpha Version § 572.140 Incorporation by reference. (a) The following materials... entitled, “Parts List and Drawings, Subpart P Hybrid III 3-year-old child crash test dummy, (H-III3C, Alpha..., Disassembly and Inspection (PADI), Subpart P, Hybird III 3-year-old Child Crash Test Dummy, (H-III3C, Alpha...

49 CFR 572.140 - Incorporation by reference.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Child Crash Test Dummy, Alpha Version § 572.140 Incorporation by reference. (a) The following materials... entitled, “Parts List and Drawings, Subpart P Hybrid III 3-year-old child crash test dummy, (H-III3C, Alpha..., Disassembly and Inspection (PADI), Subpart P, Hybird III 3-year-old Child Crash Test Dummy, (H-III3C, Alpha...

49 CFR 572.140 - Incorporation by reference.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Child Crash Test Dummy, Alpha Version § 572.140 Incorporation by reference. (a) The following materials... entitled, “Parts List and Drawings, Subpart P Hybrid III 3-year-old child crash test dummy, (H-III3C, Alpha..., Disassembly and Inspection (PADI), Subpart P, Hybird III 3-year-old Child Crash Test Dummy, (H-III3C, Alpha...

49 CFR 572.140 - Incorporation by reference.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Child Crash Test Dummy, Alpha Version § 572.140 Incorporation by reference. (a) The following materials... entitled, “Parts List and Drawings, Subpart P Hybrid III 3-year-old child crash test dummy, (H-III3C, Alpha..., Disassembly and Inspection (PADI), Subpart P, Hybird III 3-year-old Child Crash Test Dummy, (H-III3C, Alpha...

49 CFR 572.140 - Incorporation by reference.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Child Crash Test Dummy, Alpha Version § 572.140 Incorporation by reference. (a) The following materials... entitled, “Parts List and Drawings, Subpart P Hybrid III 3-year-old child crash test dummy, (H-III3C, Alpha..., Disassembly and Inspection (PADI), Subpart P, Hybird III 3-year-old Child Crash Test Dummy, (H-III3C, Alpha...

Impact and Injury Patterns in Between-Rails Frontal Crashes of Vehicles with Good Ratings for Frontal Crash Protection

PubMed Central

Morgan, Richard M.; Cui, Chongzhen; Digges, Kennerly H.; Cao, Libo; Kan, Cing-Dao (Steve)

2012-01-01

This research investigated (1) what are the key attributes of the between-rail, frontal crash, (2) what are the types of object contacted, and (3) what is the type of resulting trauma. The method was to study with both weighted and in-depth case reviews of NASS-CDS crash data with direct damage between the longitudinal rails in frontal crashes. Individual case selection was limited to belted occupants in between-rail, frontal impacts of good-rated, late-model vehicles equipped with air bags. This paper evaluates the risk of trauma for drivers in cars and LTVs in between-rail, frontal crashes, and suggests the between-rail impact is more dangerous to car drivers. Using weighted data—representing 227,305 tow-away crashes—the resulting trauma to various body regions was analyzed to suggest greatest injury is to the chest, pelvis/thigh/knee/leg, and foot/ankle. This study analyzed the type of object that caused the direct damage between the rails, including small tree or post, large tree or pole, and another vehicle; and found that the struck object was most often another vehicle or a large tree/pole. Both the extent of damage and the occupant compartment intrusion were explored, and suggest that 64% of the serious injuries are associated with increasing intrusion. Individual NASS cases were reviewed to gain a deeper understanding of the mechanical particulars in the between-rail crash. PMID:23169135

MINIMAL HEPATIC ENCEPHALOPATHY IS ASSOCIATED WITH MOTOR VEHICLE CRASHES: THE REALITY BEYOND THE DRIVING TEST

PubMed Central

Bajaj, Jasmohan S; Saeian, Kia; Schubert, Christine M; Hafeezullah, Muhammad; Franco, Jose; Varma, Rajiv R; Gibson, Douglas P; Hoffmann, Raymond G; Stravitz, R Todd; Heuman, Douglas M; Sterling, Richard K; Shiffman, Mitchell; Topaz, Allyne; Boyett, Sherry; Bell, Debulon; Sanyal, Arun J

2009-01-01

Patients with minimal hepatic encephalopathy (MHE) have impaired driving skills, but association of MHE with motor vehicle crashes is unclear. Standard psychometric tests (SPT) or inhibitory control test (ICT) can be used to diagnose MHE. The aim was to determine the association of MHE with crashes and traffic violations over the preceding year and on 1-year follow-up. Cirrhotics were diagnosed with MHE by ICT (MHEICT) and SPT (MHESPT). Self and department-of-transportation (DOT)-reports were used to determine crashes and violations over the preceding year. Agreement between self and DOT-reports was analyzed. Patients then underwent 1 year follow-up for crash/violation occurrence. Crashes in those with/without MHEICT and MHESPT were compared. 167 cirrhotics had DOT-reports, of which 120 also had self-reports. A significantly higher proportion of MHEICT cirrhotics experienced crashes in the preceding year compared to those without MHE by self-report (17% vs. 0%, p=0.0004) and DOT-reports (17% vs. 3%, p=0.004, relative risk:5.77). SPT did not differentiate between those with/without crashes. A significantly higher proportion of patients with crashes had MHEICT compared to MHESPT, both self-reported (100% vs. 50%, p=0.03) and DOT-reported (89% vs. 44%, p=0.01). There was excellent agreement between self and DOT-reports for crashes and violations (Kappa 0.90 and 0.80). 109 patients were followed prospectively. MHEICT patients had a significantly higher future crashes/violations compared to those without (22% vs. 7%, p=0.03) but MHESPT did not. MHEICT (Odds ratio:4.51) and prior year crash/violation (Odds ratio:2.96) were significantly associated with future crash/violation occurrence. PMID:19670416

Updated review of potential test procedures for FMVSS no.208

DOT National Transportation Integrated Search

1999-10-01

The objective of a crash test for Federal Motor Vehicle Safety Standard (FMVSS) No. 208 is to measure how well a passenger vehicle would protect its occupants in the event of a serious real world frontal crash. The ideal frontal crash procedure will ...

Protection of children restrained in child safety seats in side impact crashes.

PubMed

Arbogast, Kristy B; Locey, Caitlin M; Zonfrillo, Mark R; Maltese, Matthew R

2010-10-01

The performance of child restraint systems (CRS) in side impact motor vehicle crashes has been under study due to the injury and fatality burden of these events. Although previous research has quantified injury risk or described injured body regions, safety advances require an understanding of injury causation. Therefore, the objective was to delineate injury causation scenarios for CRS-restrained children in side impacts and document probable contact points in the vehicle interior. Two in-depth crash investigation databases, the Crash Injury Research and Engineering Network and the Partners for Child Passenger Safety Study, were queried for rear-seated, CRS-restrained children in side impact crashes who sustained Abbreviated Injury Scale 2+ injury. These cases were reviewed by a multidisciplinary team of physicians and engineers to describe injury patterns, injury causation, and vehicle components that contributed to the injuries. Forty-one occupants (average age, 2.6 years) met the inclusion criteria. Twenty-four were near side to the crash, 7 were far side, and 10 were center seated. The most common injuries were to the skull and brain with an increasing proportion of skull fracture as age increased. Head and spine injuries without evidence of head contact were rare but present. All thoracic injuries were lung contusions and no rib fractures occurred. Near-side head and face contacts points were along the rear vertical plane of the window and the horizontal plane of the window sill. Head and face contact points for center- and far-side occupants were along the edges of the front seat back and front seat head restraint. Head injuries are the target for injury prevention for children in CRS in side impact crashes. Most of these injuries are due to the contact; for near-side occupants, contact with the CRS structure and the door interior, for far- or center-seated occupants, contact with the front seat back. These data are useful in developing both educational and technological interventions to reduce the burden of injury to these children.

Comprehensive and human capital crash costs by maximum police-reported injury severity within selected crash types.

PubMed

Zaloshnja, Eduard; Miller, Ted; Council, Forrest; Persaud, Bhagwant

2004-01-01

This paper presents estimates for both the economic and comprehensive costs per crash for three police-coded severity groupings within 16 selected crash types and within two speed limit categories (or=50 mph). The economic costs are hard dollar costs. The comprehensive costs include economic costs and quality of life losses. We merged previously developed costs per victim keyed on the Abbreviated Injury Scale (AIS) into US crash data files that scored injuries in both the AIS and police-coded severity scales to produce per crash estimates. The most costly crashes were non-intersection fatal/disabling injury crashes on a road with a speed limit of 50 miles per hour or higher where multiple vehicles crashed head-on or a single vehicle struck a human (over 1.69 and $1.16 million per crash, respectively). The annual cost of police-reported run-off-road collisions, which include both rollovers and object impacts, represented 34% of total costs.

Comprehensive and Human Capital Crash Costs by Maximum Police-Reported Injury Severity Within Selected Crash Types

PubMed Central

Zaloshnja, Eduard; Miller, Ted; Council, Forrest; Persaud, Bhagwant

2004-01-01

This paper presents estimates for both the economic and comprehensive costs per crash for three police-coded severity groupings within 16 selected crash types and within two speed limit categories (<=45 and >=50 mph). The economic costs are hard dollar costs. The comprehensive costs include economic costs and quality of life losses. We merged previously developed costs per victim keyed on the Abbreviated Injury Scale (AIS) into US crash data files that scored injuries in both the AIS and police-coded severity scales to produce per crash estimates. The most costly crashes were non-intersection fatal/disabling injury crashes on a road with a speed limit of 50 miles per hour or higher where multiple vehicles crashed head-on or a single vehicle struck a human (over 1.69 and $1.16 million per crash, respectively). The annual cost of police-reported run-off-road collisions, which include both rollovers and object impacts, represented 34% of total costs. PMID:15319129

Establishing the Biodynamics Data Resource (BDR): Human Volunteer Impact Acceleration Research Data in the BDR

DTIC Science & Technology

2009-10-01

accelerations (+Z) were applied to HRVs in the supine position to mimic the acceleration of an ejection seat , while runs simulating aircraft crashes were...Naval Biodynamics Laboratory, 1985). The vertical testing provided a more authentic ejection seat simulation than was achievable using axial...impact acceleration exposures with hundreds of human research volunteers. The resulting volumes of kinematic and physiological data serve as a

Techniques for Efficient Detection of Rapid Weather Change and Analysis of their Impacts on a Highway Network

DOT National Transportation Integrated Search

2017-10-06

Adverse weather conditions have a significant impact on the safety, mobility, and efficiency of highway networks. Annually, 24 percent of all crashes, more than 7,400 roadway fatalities, and over 673,000 crash related injuries were caused by adverse ...

Adaptive Seat Energy Absorbers for Enhanced Crash Safety: Technology Demonstration

DTIC Science & Technology

2016-08-01

percentile male occupant and 21 ft/s crash velocity ............................................................................69 Fig. 78 Posttest ...34 ft/s crash velocity ............................................................................71 Fig. 82 Posttest photo for test no. 2, 50th...74 Fig. 86 Posttest photo for test no. 3, 50th percentile male occupant and 42

Development of crash imminent test scenarios for Integrated Vehicle-Based Safety Systems

DOT National Transportation Integrated Search

2007-04-01

This report identifies crash imminent test scenarios based on common pre-crash scenarios for integrated vehicle-based safety systems that alert the driver of a light vehicle or a heavy truck to an impending rear-end, lane change, or run-off-road cras...

Reducing death on the road: the effects of minimum safety standards, publicized crash tests, seat belts, and alcohol.

PubMed Central

Robertson, L S

1996-01-01

OBJECTIVES. Two phases of attempts to improve passenger car crash worthiness have occurred: minimum safety standards and publicized crash tests. This study evaluated these attempts, as well as changes in seat belt and alcohol use, in terms of their effect on occupant death and fatal crash rates. METHODS. Data on passenger car occupant fatalities and total involvement in fatal crashes, for 1975 through 1991, were obtained from the Fatal Accident Reporting System. Rates per mile were calculated through published sources on vehicle use by vehicle age. Regression estimates of effects of regulation, publicized crash tests, seat belt use and alcohol involvement were obtained. RESULTS. Substantial reductions in fatalities occurred in the vehicle model years from the late 1960s through most of the 1970s, when federal standards were applied. Some additional increments in reduced death rates, attributable to additional improved vehicle crashworthiness, occurred during the period of publicized crash tests. Increased seat belt use and reduced alcohol use also contributed significantly to reduced deaths. CONCLUSIONS. Minimum safety standards, crashworthiness improvements, seat belt use laws, and reduced alcohol use each contributed to a large reduction in passenger car occupant deaths. PMID:8561238

Thoracic injuries to contained and restrained occupants in single-vehicle pure rollover crashes.

PubMed

Bambach, M R; Grzebieta, R H; McIntosh, A S

2013-01-01

Around one in three contained and restrained seriously injured occupants in single-vehicle pure rollover crashes receive a serious injury to the thorax. With dynamic rollover test protocols currently under development, there is a need to understand the nature and cause of serious thoracic injuries incurred in rollover events. This will allow decisions to be made with regards to adoption of a suitable crash test dummy and appropriate thoracic injury criteria in such protocols. Valid rollover occupant protection test protocols will lead to vehicle improvements that will reduce the high trauma burden of vehicle rollover crashes. This paper presents an analysis of contained and restrained occupants involved in single-vehicle pure rollover crashes that occurred in the United States between 2000 and 2009 (inclusive). Serious thoracic injury typology and causality are determined. A logistic regression model is developed to determine associations between the incidence of serious thoracic injury and the human, vehicle and environmental characteristics of the crashes. Recommendations are made with regards to the appropriate assessment of potential thoracic injury in dynamic rollover occupant protection crash test protocols. Copyright © 2012 Elsevier Ltd. All rights reserved.

Objective biofidelity rating of a numerical human occupant model in frontal to lateral impact.

PubMed

de Lange, Ronald; van Rooij, Lex; Mooi, Herman; Wismans, Jac

2005-11-01

Both hardware crash dummies and mathematical human models have been developed largely using the same biomechanical data. For both, biofidelity is a main requirement. Since numerical modeling is not bound to hardware crash dummy design constraints, it allows more detailed modeling of the human and offering biofidelity for multiple directions. In this study the multi-directional biofidelity of the MADYMO human occupant model is assessed, to potentially protect occupants under various impact conditions. To evaluate the model's biofidelity, generally accepted requirements were used for frontal and lateral impact: tests proposed by EEVC and NHTSA and tests specified by ISO TR9790, respectively. A subset of the specified experiments was simulated with the human model. For lateral impact, the results were objectively rated according to the ISO protocol. Since no rating protocol was available for frontal impact, the ISO rating scheme for lateral was used for frontal, as far as possible. As a result, two scores show the overall model biofidelity for frontal and lateral impact, while individual ratings provide insight in the quality on body segment level. The results were compared with the results published for the THOR and WorldSID dummies, showing that the mathematical model exhibits a high level of multi-directional biofidelity. In addition, the performance of the human model in the NBDL 11G oblique test indicates a valid behavior of the model in intermediate directions as well. A new aspect of this study is the objective assessment of the multi-directional biofidelity of the mathematical human model according to accepted requirements. Although hardware dummies may always be used in regulations, it is expected that virtual testing with human models will serve in extrapolating outside the hardware test environment. This study was a first step towards simulating a wider range of impact conditions, such as angled impact and rollover.

Improving Hybrid III injury assessment in steering wheel rim to chest impacts using responses from finite element Hybrid III and human body model.

PubMed

Holmqvist, Kristian; Davidsson, Johan; Mendoza-Vazquez, Manuel; Rundberget, Peter; Svensson, Mats Y; Thorn, Stefan; Törnvall, Fredrik

2014-01-01

The main aim of this study was to improve the quality of injury risk assessments in steering wheel rim to chest impacts when using the Hybrid III crash test dummy in frontal heavy goods vehicle (HGV) collision tests. Correction factors for chest injury criteria were calculated as the model chest injury parameter ratios between finite element (FE) Hybrid III, evaluated in relevant load cases, and the Total Human Model for Safety (THUMS). This is proposed to be used to compensate Hybrid III measurements in crash tests where steering wheel rim to chest impacts occur. The study was conducted in an FE environment using an FE-Hybrid III model and the THUMS. Two impactor shapes were used, a circular hub and a long, thin horizontal bar. Chest impacts at velocities ranging from 3.0 to 6.0 m/s were simulated at 3 impact height levels. A ratio between FE-Hybrid III and THUMS chest injury parameters, maximum chest compression C max, and maximum viscous criterion VC max, were calculated for the different chest impact conditions to form a set of correction factors. The definition of the correction factor is based on the assumption that the response from a circular hub impact to the middle of the chest is well characterized and that injury risk measures are independent of impact height. The current limits for these chest injury criteria were used as a basis to develop correction factors that compensate for the limitations in biofidelity of the Hybrid III in steering wheel rim to chest impacts. The hub and bar impactors produced considerably higher C max and VC max responses in the THUMS compared to the FE-Hybrid III. The correction factor for the responses of the FE-Hybrid III showed that the criteria responses for the bar impactor were consistently overestimated. Ratios based on Hybrid III and THUMS responses provided correction factors for the Hybrid III responses ranging from 0.84 to 0.93. These factors can be used to estimate C max and VC max values when the Hybrid III is used in crash tests for which steering wheel rim to chest interaction occurs. For the FE-Hybrid III, bar impacts caused higher chest deflection compared to hub impacts, although the contrary results were obtained with the more humanlike THUMS. Correction factors were developed that can be used to correct the Hybrid III chest responses. Higher injury criteria capping limits for steering wheel impacts are acceptable. Supplemental materials are available for this article. Go to the publisher's online edition of Traffic Injury Prevention to view the supplemental file.

Impact data from a transport aircraft during a controlled impact demonstration

NASA Technical Reports Server (NTRS)

Fasanella, E. L.; Alfaro-Bou, E.; Hayduk, R. J.

1986-01-01

On December 1, 1984, the FAA and NASA conducted a remotely piloted air-to-ground crash test of a Boeing 720 transport aircraft instrumented to measure crash loads of the structure and the anthropomorphic dummy passengers. Over 330 time histories of accelerations and loads collected during the Full-Scale Transport Controlled Impact Demonstration (CID) for the 1-sec period after initial impact are presented. Although a symmetric 1 deg. nose-up attitude with a 17 ft/sec sink rate was planned, the plane was yawed and rolled 13 deg. at initial (left-wing) impact. The first fuselage impact occurred near the nose wheel well with the nose pitched down 2.5 deg. Peak normal (vertical) floor accelerations were highest in the cockpit and forward cabin near the nose wheel well and were approximately 14G. The remaining cabin floor received normal acceleration peaks of 7G or less. The peak longitudinal floor accelerations showed a similar distribution, with the highest (7G) in the cockpit and forward cabin, decreasing to 4G or less toward the rear. Peak transverse floor accelerations ranged from about 5G in the cockpit to 1G in the aft fuselage.

Pelvic ring fractures: implications of vehicle design, crash type, and occupant characteristics.

PubMed

Rowe, Stephen A; Sochor, Mark S; Staples, Kurtis S; Wahl, Wendy L; Wang, Stewart C

2004-10-01

Pelvic ring fractures (PRFs) are a major cause of morbidity and mortality in motor vehicle collisions (MVCs). Understanding the factors leading to PRFs may help improve vehicle design and safety. This study sought to determine the vehicular, crash, and occupant characteristics that contribute to PRFs. From 1997 to 2003, 240 adult patients involved in lateral or frontal crashes were prospectively studied. Comprehensive crash reconstructions, vehicle analysis, and occupant data were compiled and analyzed as part of the national Crash Injury Research Engineering Network project. Of 240 study patients, 38 had PRFs. The incidence of PRFs was significantly associated with female gender, lateral impact crashes, vehicle incompatibility, and severity of crash. Seat belts and airbags were not protective against PRFs in either lateral or frontal crashes. All vehicles in the current study were less than 6 years old at the time of the MVC and thus reflect newer safety designs. Compared with studies of PRFs in MVCs before the widespread adoption of modern safety standards, our series suggests there has been a modest decrease in the incidence of PRFs in newer vehicles. Current safety standards do not adequately protect against PRFs, especially in lateral MVCs involving incompatibility and female occupants. New technology needs to be developed and implemented. Our data suggest that side impact airbags, alteration of vehicle geometry, and increased reinforcement of side panels and doors may result in fewer PRFs.

Facilities and Methods Used in Full-scale Airplane Crash-fire Investigation

NASA Technical Reports Server (NTRS)

Black, Dugald O.

1952-01-01

The facilities and the techniques employed in the conduct of full scale airplane crash-fire studies currently being conducted at the NACA Lewis laboratory are discussed herein. This investigation is part of a comprehensive study of the airplane crash-fire problem. The crash configuration chosen, the general physical layout of the crash site, the test methods, the instrumentation, the data-recording systems, and the post-crash examination procedure are described

Evaluation of an autonomous braking system in real-world PTW crashes.

PubMed

Savino, Giovanni; Pierini, Marco; Rizzi, Matteo; Frampton, Richard

2013-01-01

Powered 2-wheelers (PTWs) are becoming increasingly popular in Europe. They have the ability to get around traffic queues, thus lowering fuel consumption and increasing mobility. The risk of rider injury in a traffic crash is however much higher than that associated with car users. The European project, Powered Two Wheeler Integrated Safety (PISa), identified an autonomous braking system (AB) as a priority to reduce the injury consequences of a PTW crash. The aim of this study was to assess the potential effectiveness of the AB system developed in PISa, taking into account the specific system characteristics that emerged during the design, development and testing phases. Fifty-eight PTW cases representing European crash configurations were examined, in which 43 percent of riders sustained a Maximum Abbreviated Injury Scale (MAIS) 2+ injury. Two of the most common crash types were a PTW impacting a stationary object (car following scenario) 16% and an object pulling across the PTW path (crossing scenario) 54%. An expert team analysed the in-depth material of the sample crashes and determined a posteriori to what extent the AB would have affected the crash. For those cases where the AB was evaluated as applicable, a further quantitative evaluation of the benefits was conducted by considering a set of different possible rider reactions in addition to that exhibited in the actual crash. In 67 percent of cases, the application of AB could have mitigated the crash outcome. Analysis of those real crash cases showed the potential for an expert rider to avoid the collision. An early reaction of the rider, associated with a correct application of the brakes would have avoided 18 of the 37 car following/crossing scenarios. Conversely, according to the analysis, an expert rider would not have been able to avoid 19 of the 37 cases. In 14 of those 19 cases, the AB would have contributed to mitigating the crash outcome. This study demonstrated significant potential for application of the autonomous braking system in car following and crossing scenarios. In addition, the theoretical benefit curves for the AB globally, were able to provide good quantitative indications of its benefits in real cases where the AB was considered applicable. Further analysis with larger databases is suggested in order to confirm the magnitude of benefits in the PTW crash population.

Risk factors for motor vehicle crashes in older women.

PubMed

Margolis, Karen L; Kerani, Roxanne Pieper; McGovern, Paul; Songer, Thomas; Cauley, Jane A; Ensrud, Kristine E

2002-03-01

Motor vehicle crash and fatality rates are higher per mile driven for elderly drivers, with an exponential increase above age 75. Identifying elderly drivers who are at risk for automobile crashes may help direct interventions to reduce their high rate of injuries and deaths. Subjects were 1416 women aged 65 to 84 enrolled in the Portland, Ore. site of the Study of Osteoporotic Fractures. Motor vehicle crash information for the years 1986-1995 for each participant was obtained from the Oregon State Department of Transportation. Items from questionnaires, interviews, and physical examinations were tested prospectively for associations with the occurrence of motor vehicle crashes. About one third of participants (415 of 1416) had a motor vehicle crash during a mean follow-up time of 5.7 years. After adjustment for age and weekly driving mileage, risk factors significantly associated with motor vehicle crashes were a fall in the previous year [hazard ratio (HR) 1.53, 95% confidence interval (CI) 1.26-1.86], a greater orthostatic systolic blood pressure drop (HR 1.11 per 12.5 mm Hg, 95% CI 1.01-1.22), and increased foot reaction time (HR 1.10 per 0.06 second, 95% CI 1.00-1.22). Other neuromuscular tests, functional status, medical diagnoses, vision tests, and cognitive tests did not predict motor vehicle crashes in this study population. This prospective study with extended follow-up of a large cohort of elderly women has identified crash risk factors that can be measured in the clinical setting. Further study is needed to determine if interventions aimed at these risk factors can decrease the risk of motor vehicle crashes.

Crash Simulation of a Vertical Drop Test of a Commuter-Class Aircraft

NASA Technical Reports Server (NTRS)

Jackson, Karen E.; Fasanella, Edwin L.

2004-01-01

A finite element model of an ATR42-300 commuter-class aircraft was developed and a crash simulation was executed. Analytical predictions were correlated with data obtained from a 30-ft/s (9.14-m/s) vertical drop test of the aircraft. The purpose of the test was to evaluate the structural response of the aircraft when subjected to a severe, but survivable, impact. The aircraft was configured with seats, dummies, luggage, and other ballast. The wings were filled with 8,700 lb. (3,946 kg) of water to represent the fuel. The finite element model, which consisted of 57,643 nodes and 62,979 elements, was developed from direct measurements of the airframe geometry. The seats, dummies, luggage, fuel, and other ballast were represented using concentrated masses. The model was executed in LS-DYNA, a commercial code for performing explicit transient dynamic simulations. Predictions of structural deformation and selected time-history responses were generated. The simulation was successfully validated through extensive test-analysis correlation.

Reporting on cyclist crashes in Australian newspapers.

PubMed

Boufous, Soufiane; Aboss, Ahmad; Montgomery, Victoria

2016-10-01

To assess information on cyclist crashes reported in Australian newspapers. The Factiva news archive was searched for articles on cyclist crashes published in major Australian newspapers between 2010 and 2013. Information on the circumstances of cyclist crashes were extracted and coded. A total of 160 cyclist crashes were covered by 198 newspaper articles, with 44% of crashes resulting in cyclist fatalities. Crashes reported by more than one newspaper were more likely to involve public figures or protracted court cases. Individual characteristics of cyclists as well as the location of the crash were reported for more than 80% of crashes. The road user at fault was reported for more than half of crashes. In contrast, information on helmet use, alcohol and cycling lanes was mentioned for only about 10% of crashes. Fewer than one in five articles mentioned prevention strategies including education campaigns, legislative and infrastructure changes. Australian newspapers tend to focus on the most dramatic and more 'newsworthy' aspects of cyclist crashes. Cycling advocates need to work with journalists to improve the quality of this coverage. Better communication between cycling advocates and journalists is likely to have a positive impact on the safety and the uptake of cycling in the community. © 2016 Public Health Association of Australia.

Impact of State Ignition Interlock Laws on Alcohol-Involved Crash Deaths in the United States.

PubMed

Kaufman, Elinore J; Wiebe, Douglas J

2016-05-01

To investigate the impact on alcohol-involved crash deaths of universal ignition interlock requirements, which aim to prevent people convicted of driving under the influence of alcohol from driving while intoxicated. We used data from the National Highway Traffic Safety Administration for 1999 to 2013. From 2004 to 2013, 18 states made interlocks mandatory for all drunk-driving convictions. We compared alcohol-involved crash deaths between 18 states with and 32 states without universal interlock requirements, accounting for state and year effects, and for clustering within states. Policy impact was apparent 3 years after implementation. The adjusted rate of alcohol-involved crash deaths was 4.7 (95% confidence interval [CI] = 4.0, 5.4) per 100,000 in states with the universal interlock requirement, compared with 5.5 (95% CI = 5.48, 5.53) in states without, an absolute reduction of 0.8 (95% CI = 0.1, 1.5) deaths per 100,000 per year. Requiring ignition interlocks for all drunk-driving convictions was associated with 15% fewer alcohol-involved crash deaths, compared with states with less-stringent requirements. Interlocks are a life-saving technology that merit wider use.

Application of Poisson random effect models for highway network screening.

PubMed

Jiang, Ximiao; Abdel-Aty, Mohamed; Alamili, Samer

2014-02-01

In recent years, Bayesian random effect models that account for the temporal and spatial correlations of crash data became popular in traffic safety research. This study employs random effect Poisson Log-Normal models for crash risk hotspot identification. Both the temporal and spatial correlations of crash data were considered. Potential for Safety Improvement (PSI) were adopted as a measure of the crash risk. Using the fatal and injury crashes that occurred on urban 4-lane divided arterials from 2006 to 2009 in the Central Florida area, the random effect approaches were compared to the traditional Empirical Bayesian (EB) method and the conventional Bayesian Poisson Log-Normal model. A series of method examination tests were conducted to evaluate the performance of different approaches. These tests include the previously developed site consistence test, method consistence test, total rank difference test, and the modified total score test, as well as the newly proposed total safety performance measure difference test. Results show that the Bayesian Poisson model accounting for both temporal and spatial random effects (PTSRE) outperforms the model that with only temporal random effect, and both are superior to the conventional Poisson Log-Normal model (PLN) and the EB model in the fitting of crash data. Additionally, the method evaluation tests indicate that the PTSRE model is significantly superior to the PLN model and the EB model in consistently identifying hotspots during successive time periods. The results suggest that the PTSRE model is a superior alternative for road site crash risk hotspot identification. Copyright © 2013 Elsevier Ltd. All rights reserved.

Crash probability estimation via quantifying driver hazard perception.

PubMed

Li, Yang; Zheng, Yang; Wang, Jianqiang; Kodaka, Kenji; Li, Keqiang

2018-07-01

Crash probability estimation is an important method to predict the potential reduction of crash probability contributed by forward collision avoidance technologies (FCATs). In this study, we propose a practical approach to estimate crash probability, which combines a field operational test and numerical simulations of a typical rear-end crash model. To consider driver hazard perception characteristics, we define a novel hazard perception measure, called as driver risk response time, by considering both time-to-collision (TTC) and driver braking response to impending collision risk in a near-crash scenario. Also, we establish a driving database under mixed Chinese traffic conditions based on a CMBS (Collision Mitigation Braking Systems)-equipped vehicle. Applying the crash probability estimation in this database, we estimate the potential decrease in crash probability owing to use of CMBS. A comparison of the results with CMBS on and off shows a 13.7% reduction of crash probability in a typical rear-end near-crash scenario with a one-second delay of driver's braking response. These results indicate that CMBS is positive in collision prevention, especially in the case of inattentive drivers or ole drivers. The proposed crash probability estimation offers a practical way for evaluating the safety benefits in the design and testing of FCATs. Copyright © 2017 Elsevier Ltd. All rights reserved.

Impact of graduated driver licensing restrictions on crashes involving young drivers in New Zealand

PubMed Central

Begg, D; Stephenson, S; Alsop, J; Langley, J

2001-01-01

Objective—To determine the impact on young driver crashes of the three main driving restrictions in the New Zealand graduated driver licensing (GDL) system: night-time curfew, no carrying of young passengers, and a blood alcohol limit of 30 mg/100 ml. Method—The database for this study was created by linking police crash reports to hospital inpatient records (1980–95). Multivariate logistic regression was used to compare car crashes involving a young driver licensed before GDL (n=2252) with those who held a restricted graduated licence (n=980) and with those who held a full graduated licence (n=1273), for each of the main driving restrictions. Results—Compared with the pre-GDL group, the restricted licence drivers had fewer crashes at night (p=0.003), fewer involving passengers of all ages (p=0.018), and fewer where alcohol was suspected (p=0.034), but not fewer involving young casualties (p=0.980). Compared with the pre-GDL drivers, those with the full graduated licence had fewer night crashes (p=0.042) but did not differ significantly for any of the other factors examined. Conclusion—These results suggest that some of the GDL restrictions, especially the night-time curfew, have contributed to a reduction in serious crashes involving young drivers. PMID:11770654

Impact of graduated driver licensing restrictions on crashes involving young drivers in New Zealand.

PubMed

Begg, D J; Stephenson, S; Alsop, J; Langley, J

2001-12-01

To determine the impact on young driver crashes of the three main driving restrictions in the New Zealand graduated driver licensing (GDL) system: night-time curfew, no carrying of young passengers, and a blood alcohol limit of 30 mg/100 ml. The database for this study was created by linking police crash reports to hospital inpatient records (1980-95). Multivariate logistic regression was used to compare car crashes involving a young driver licensed before GDL (n=2,252) with those who held a restricted graduated licence (n=980) and with those who held a full graduated licence (n=1,273), for each of the main driving restrictions. Compared with the pre-GDL group, the restricted licence drivers had fewer crashes at night (p=0.003), fewer involving passengers of all ages (p=0.018), and fewer where alcohol was suspected (p=0.034), but not fewer involving young casualties (p=0.980). Compared with the pre-GDL drivers, those with the full graduated licence had fewer night crashes (p=0.042) but did not differ significantly for any of the other factors examined. These results suggest that some of the GDL restrictions, especially the night-time curfew, have contributed to a reduction in serious crashes involving young drivers.

Evaluation of a Singular Value Decomposition Approach for Impact Dynamic Data Correlation

NASA Technical Reports Server (NTRS)

Horta, Lucas G.; Lyle, Karen H.; Lessard, Wendy B.

2003-01-01

Impact dynamic tests are used in the automobile and aircraft industries to assess survivability of occupants during crash, to assert adequacy of the design, and to gain federal certification. Although there is no substitute for experimental tests, analytical models are often developed and used to study alternate test conditions, to conduct trade-off studies, and to improve designs. To validate results from analytical predictions, test and analysis results must be compared to determine the model adequacy. The mathematical approach evaluated in this paper decomposes observed time responses into dominant deformation shapes and their corresponding contribution to the measured response. To correlate results, orthogonality of test and analysis shapes is used as a criterion. Data from an impact test of a composite fuselage is used and compared to finite element predictions. In this example, the impact response was decomposed into multiple shapes but only two dominant shapes explained over 85% of the measured response

An assessment of the potential for neck injury due to padding of aircraft interior walls for head impact protection.

DOT National Transportation Integrated Search

1993-08-01

This report describes a short test program to assess the potential for neck injury induced by placing padding on the interior walls of an aircraft cabin to reduce the possibility of a head injury during a crash. Such padding is a possible mechanism o...

Crash Test Dummies or Knowledgeable Practitioners? Evaluating the Impact of Professional Development.

ERIC Educational Resources Information Center

Harrison, Roger; Edwards, Richard; Brown, Jonathan

2001-01-01

Draws on the authors' experience of developing and presenting an Open University Masters level course: Guidance and Counselling in Learning. Explores the diversity of contexts for guidance practices and the assumptions about the relationship between theory and practice that is embedded in various approaches to professional development. (Contains…

Deployable System for Crash-Load Attenuation

NASA Technical Reports Server (NTRS)

Kellas, Sotiris; Jackson, Karen E.

2007-01-01

An externally deployable honeycomb structure is investigated with respect to crash energy management for light aircraft. The new concept utilizes an expandable honeycomb-like structure to absorb impact energy by crushing. Distinguished by flexible hinges between cell wall junctions that enable effortless deployment, the new energy absorber offers most of the desirable features of an external airbag system without the limitations of poor shear stability, system complexity, and timing sensitivity. Like conventional honeycomb, once expanded, the energy absorber is transformed into a crush efficient and stable cellular structure. Other advantages, afforded by the flexible hinge feature, include a variety of deployment options such as linear, radial, and/or hybrid deployment methods. Radial deployment is utilized when omnidirectional cushioning is required. Linear deployment offers better efficiency, which is preferred when the impact orientation is known in advance. Several energy absorbers utilizing different deployment modes could also be combined to optimize overall performance and/or improve system reliability as outlined in the paper. Results from a series of component and full scale demonstration tests are presented as well as typical deployment techniques and mechanisms. LS-DYNA analytical simulations of selected tests are also presented.

Association of contact loading in diffuse axonal injuries from motor vehicle crashes.

PubMed

Yoganandan, Narayan; Gennarelli, Thomas A; Zhang, Jiangyue; Pintar, Frank A; Takhounts, Erik; Ridella, Stephen A

2009-02-01

Although studies have been conducted to analyze brain injuries from motor vehicle crashes, the association of head contact has not been fully established. This study examined the association in occupants sustaining diffuse axonal injuries (DAIs). The 1997 to 2006 motor vehicle Crash Injury Research Engineering Network database was used. All crash modes and all changes in velocity were included; ejections and rollovers were excluded; injuries to front and rear seat occupants with and without restraint use were considered. DAI were coded in the database using Abbreviated Injury Scale 1990. Loss of consciousness was included and head contact was based on medical- and crash-related data. Sixty-seven occupants with varying ages were coded with DAI. Forty-one adult occupants (mean, 33 years of age, 171-cm tall, 71-kg weight; 30 drivers, 11 passengers) were analyzed. Mean change in velocity was 41.2 km/h and Glasgow Coma Scale score was 4. There were 33 lateral, 6 frontal, and 2 rear crashes with 32 survivors and 9 were fatalities. Two occupants in the same crash did not sustain DAI. Although skull fractures and scalp injuries occurred in some impacts, head contact was identified in all frontal, rear, and far side, and all but one nearside crashes. Using a large sample size of occupants sustaining DAI in 1991 to 2006 model year vehicles, DAI occurred more frequently in side than frontal crashes, is most commonly associated with impact load transfer, and is not always accompanied by skull fractures. The association of head contact in >95% of cases underscores the importance of evaluating crash-related variables and medical information for trauma analysis. It would be prudent to include contact loading in addition to angular kinematics in the analysis and characterization of DAI.

The impact of red light cameras on safety in Arizona.

PubMed

Shin, Kangwon; Washington, Simon

2007-11-01

Red light cameras (RLCs) have been used in a number of US cities to yield a demonstrable reduction in red light violations; however, evaluating their impact on safety (crashes) has been relatively more difficult. Accurately estimating the safety impacts of RLCs is challenging for several reasons. First, many safety related factors are uncontrolled and/or confounded during the periods of observation. Second, "spillover" effects caused by drivers reacting to non-RLC equipped intersections and approaches can make the selection of comparison sites difficult. Third, sites selected for RLC installation may not be selected randomly, and as a result may suffer from the regression to the mean bias. Finally, crash severity and resulting costs need to be considered in order to fully understand the safety impacts of RLCs. Recognizing these challenges, a study was conducted to estimate the safety impacts of RLCs on traffic crashes at signalized intersections in the cities of Phoenix and Scottsdale, Arizona. Twenty-four RLC equipped intersections in both cities are examined in detail and conclusions are drawn. Four different evaluation methodologies were employed to cope with the technical challenges described in this paper and to assess the sensitivity of results based on analytical assumptions. The evaluation results indicated that both Phoenix and Scottsdale are operating cost-effective installations of RLCs: however, the variability in RLC effectiveness within jurisdictions is larger in Phoenix. Consistent with findings in other regions, angle and left-turn crashes are reduced in general, while rear-end crashes tend to increase as a result of RLCs.

Patterns of injury to restrained children in side impact motor vehicle crashes: the side impact syndrome.

PubMed

Orzechowski, Kelly M; Edgerton, Elizabeth A; Bulas, Dorothy I; McLaughlin, Patrick M; Eichelberger, Martin R

2003-06-01

Injury patterns among children in frontal collisions have been well documented, but little information exists regarding injuries to children in side impact collisions. Restrained children 14-years-old or younger admitted to the hospital for crash injuries were analyzed. Data concerning injuries, medical treatment, and outcome were correlated with crash data. Case reviews achieved consensus regarding injury contact points. Side impacts were compared with frontal impacts. These results were then compared with data from the National Automotive Sampling System. There were no differences between the groups with respect to age, sex, restraint type, or seat position. Compared with frontal crashes, children in side impacts were more likely to have an Injury Severity Score > 15 (odds ratio [OR], 3.1; 95% confidence interval [CI], 1.7-5.8) and were more likely to have Abbreviated Injury Scale score 2+ injuries to the head (OR, 2.5; 95% CI, 1.4-4.4), chest (OR, 4.0; 95% CI, 2.0-8.0), and cervical spine (OR, 3.7; 95% CI, 1.2-11.3). When compared with National Automotive Sampling System data, similar trends were seen regarding Abbreviated Injury Scale score 2+ injuries to the head, chest, and extremities. In this study population, side impacts resulted in more injuries to the head, cervical spine, and chest. Knowledge of this pattern-the side impact syndrome-can help guide diagnosis, treatment, and prevention strategy.

Analytical modeling of transport aircraft crash scenarios to obtain floor pulses

NASA Technical Reports Server (NTRS)

Wittlin, G.; Lackey, D.

1983-01-01

The KRAS program was used to analyze transport aircraft candidate crash scenarios. Aircraft floor pulses and seat/occupant responses are presented. Results show that: (1) longitudinal only pulses can be represented by equivalent step inputs and/or static requirements; (2) the L1649 crash test floor longitudinal pulse for the aft direction (forward inertia) is less than 9g static or an equivalent 5g pulse; aft inertia accelerations are extremely small ((ch76) 3g) for representative crash scenarios; (3) a viable procedure to relate crash scenario floor pulses to standard laboratory dynamic and static test data using state of the art analysis and test procedures was demonstrated; and (4) floor pulse magnitudes are expected to be lower for wide body aircraft than for smaller narrow body aircraft.

Motorcycle safety programmes in Malaysia: how effective are they?

PubMed

Radin Umar, R S

2006-06-01

This paper presents the approach taken by the Malaysian Government to contain motorcycle casualties in Malaysia. It involves the exposure control, crash prevention, behaviour modification and injury control related to humans, vehicles and the environment based on pre-crash, crash and post-crash scenarios of motorcycle accidents. These initiatives emanated mainly from the research and development carried out by the Road Safety Research Centre at Universiti Putra Malaysia. Recent outcomes from these initiatives are presented and their impact is highlighted.

The impact of texting bans on motor vehicle crash-related hospitalizations.

PubMed

Ferdinand, Alva O; Menachemi, Nir; Blackburn, Justin L; Sen, Bisakha; Nelson, Leonard; Morrisey, Michael

2015-05-01

We used a panel design and the Nationwide Inpatient Sample from 19 states between 2003 and 2010 to examine the impact of texting bans on crash-related hospitalizations. We conducted conditional negative binomial regressions with state, year, and month fixed effects to examine changes in crash-related hospitalizations in states after the enactment of a texting ban relative to those in states without such bans. Results indicate that texting bans were associated with a 7% reduction in crash-related hospitalizations among all age groups. Texting bans were significantly associated with reductions in hospitalizations among those aged 22 to 64 years and those aged 65 years or older. Marginal reductions were seen among adolescents. States that have not passed strict texting bans should consider doing so.

Influence of the strain path on crash properties of a crash-box structure by experimental and numerical approaches

NASA Astrophysics Data System (ADS)

Durrenberger, L.; Even, D.; Molinari, A.; Rusinek, A.

2006-08-01

In order to reduce the gas emission without decreasing the passengers safety, the UHSS (Ultra High Strength Steel) steels are more and more used in the automotive industry. The very high mechanical characteristics of these steels allow to reduce the car weight thanks to the thickness reduction of the structure parts. The aim of this study is to analyse the plastic pre-strain effect (forming) on the crash properties of a crash-box structure. In order to achieve this goal, experimental rheological tests have been performed by combining quasi-static tensile tests followed by dynamic tensile test (8.10 - 3 s - 1 ≤ dot{\\varepsilon} ≤ 1000 s - 1) for a TRIP steel produced by ARCELOR. The combination of these results allows to obtain a better understanding of the steel behaviour in dynamic loading under different strain paths. All these information are necessary for an efficient simulation of crash test by including a pertinent material response. A special attention is given to the influence of the previous forming process on the dynamical response of crash boxes.

Predicting long-term neurological outcomes after severe traumatic brain injury requiring decompressive craniectomy: A comparison of the CRASH and IMPACT prognostic models.

PubMed

Honeybul, Stephen; Ho, Kwok M

2016-09-01

Predicting long-term neurological outcomes after severe traumatic brain (TBI) is important, but which prognostic model in the context of decompressive craniectomy has the best performance remains uncertain. This prospective observational cohort study included all patients who had severe TBI requiring decompressive craniectomy between 2004 and 2014, in the two neurosurgical centres in Perth, Western Australia. Severe disability, vegetative state, or death were defined as unfavourable neurological outcomes. Area under the receiver-operating-characteristic curve (AUROC) and slope and intercept of the calibration curve were used to assess discrimination and calibration of the CRASH (Corticosteroid-Randomisation-After-Significant-Head injury) and IMPACT (International-Mission-For-Prognosis-And-Clinical-Trial) models, respectively. Of the 319 patients included in the study, 119 (37%) had unfavourable neurological outcomes at 18-month after decompressive craniectomy for severe TBI. Both CRASH (AUROC 0.86, 95% confidence interval 0.81-0.90) and IMPACT full-model (AUROC 0.85, 95% CI 0.80-0.89) were similar in discriminating between favourable and unfavourable neurological outcome at 18-month after surgery (p=0.690 for the difference in AUROC derived from the two models). Although both models tended to over-predict the risks of long-term unfavourable outcome, the IMPACT model had a slightly better calibration than the CRASH model (intercept of the calibration curve=-4.1 vs. -5.7, and log likelihoods -159 vs. -360, respectively), especially when the predicted risks of unfavourable outcome were <80%. Both CRASH and IMPACT prognostic models were good in discriminating between favourable and unfavourable long-term neurological outcome for patients with severe TBI requiring decompressive craniectomy, but the calibration of the IMPACT full-model was better than the CRASH model. Crown Copyright © 2016. Published by Elsevier Ltd. All rights reserved.

Crash tests of three identical low-wing single-engine airplane

NASA Technical Reports Server (NTRS)

Castle, C. B.; Alfaro-Bou, E.

1983-01-01

Three identical four place, low wing single engine airplane specimens with nominal masses of 1043 kg were crash tested under controlled free flight conditions. The tests were conducted at the same nominal velocity of 25 m/sec along the flight path. Two airplanes were crashed on a concrete surface (at 10 and 30 deg pitch angles), and one was crashed on soil (at a -30 deg pitch angle). The three tests revealed that the specimen in the -30 deg test on soil sustained massive structural damage in the engine compartment and fire wall. Also, the highest longitudinal cabin floor accelerations occurred in this test. Severe damage, but of lesser magnitude, occurred in the -30 deg test on concrete. The highest normal cabin floor accelerations occurred in this test. The least structural damage and lowest accelerations occurred in the 10 deg test on concrete.

Anthropometric specifications, development, and evaluation of EvaRID--a 50th percentile female rear impact finite element dummy model.

PubMed

Carlsson, Anna; Chang, Fred; Lemmen, Paul; Kullgren, Anders; Schmitt, Kai-Uwe; Linder, Astrid; Svensson, Mats Y

2014-01-01

Whiplash-associated disorders (WADs), or whiplash injuries, due to low-severity vehicle crashes are of great concern in motorized countries and it is well established that the risk of such injuries is higher for females than for males, even in similar crash conditions. Recent protective systems have been shown to be more beneficial for males than for females. Hence, there is a need for improved tools to address female WAD prevention when developing and evaluating the performance of whiplash protection systems. The objective of this study is to develop and evaluate a finite element model of a 50th percentile female rear impact crash test dummy. The anthropometry of the 50th percentile female was specified based on literature data. The model, called EvaRID (female rear impact dummy), was based on the same design concept as the existing 50th percentile male rear impact dummy, the BioRID II. A scaling approach was developed and the first version, EvaRID V1.0, was implemented. Its dynamic response was compared to female volunteer data from rear impact sled tests. The EvaRID V1.0 model and the volunteer tests compared well until ∼250 ms of the head and T1 forward accelerations and rearward linear displacements and of the head rearward angular displacement. Markedly less T1 rearward angular displacement was found for the EvaRID model compared to the female volunteers. Similar results were received for the BioRID II model when comparing simulated responses with experimental data under volunteer loading conditions. The results indicate that the biofidelity of the EvaRID V1.0 and BioRID II FE models have limitations, predominantly in the T1 rearward angular displacement, at low velocity changes (7 km/h). The BioRID II model was validated against dummy test results in a loading range close to consumer test conditions (EuroNCAP) and lower severity levels of volunteer testing were not considered. The EvaRID dummy model demonstrated the potential of becoming a valuable tool when evaluating and developing seats and whiplash protection systems. However, updates of the joint stiffness will be required to provide better correlation at lower load levels. Moreover, the seated posture, curvature of the spine, and head position of 50th percentile female occupants needs to be established and implemented in future models.

Studying the effect of weather conditions on daily crash counts using a discrete time-series model.

PubMed

Brijs, Tom; Karlis, Dimitris; Wets, Geert

2008-05-01

In previous research, significant effects of weather conditions on car crashes have been found. However, most studies use monthly or yearly data and only few studies are available analyzing the impact of weather conditions on daily car crash counts. Furthermore, the studies that are available on a daily level do not explicitly model the data in a time-series context, hereby ignoring the temporal serial correlation that may be present in the data. In this paper, we introduce an integer autoregressive model for modelling count data with time interdependencies. The model is applied to daily car crash data, metereological data and traffic exposure data from the Netherlands aiming at examining the risk impact of weather conditions on the observed counts. The results show that several assumptions related to the effect of weather conditions on crash counts are found to be significant in the data and that if serial temporal correlation is not accounted for in the model, this may produce biased results.

A robust estimation of the effects of motorcycle autonomous emergency braking (MAEB) based on in-depth crashes in Australia.

PubMed

Savino, Giovanni; Mackenzie, Jamie; Allen, Trevor; Baldock, Matthew; Brown, Julie; Fitzharris, Michael

2016-09-01

Autonomous emergency braking (AEB) is a safety system that detects imminent forward collisions and reacts by slowing down the host vehicle without any action from the driver. AEB effectiveness in avoiding and mitigating real-world crashes has recently been demonstrated. Research suggests that a translation of AEB to powered 2-wheelers could also be beneficial. Previous studies have estimated the effects of a motorcycle AEB system (MAEB) via computer simulations. Though effects of MAEB were computed for motorcycle crashes derived from in-depth crash investigation, there may be some inaccuracies due to limitations of postcrash investigation (e.g., inaccuracies in preimpact velocity of the motorcycle). Furthermore, ideal MAEB technology was assumed, which may lead to overestimation of the benefits. This study sought to evaluate the sensitivity of the simulations to variations in reconstructed crash cases and the capacity of the MAEB system in order to provide a more robust estimation of MAEB effects. First, a comprehensive classification of accidents was used to identify scenarios in which MAEB was likely to apply, and representative crash cases from those available for this study were populated for each crash scenario. Second, 100 variant cases were generated by randomly varying a set of simulation parameters with given normal distributions around the baseline values. Variants reflected uncertainties in the original data. Third, the effects of MAEB were estimated in terms of the difference in the impact speed of the host motorcycle with and without the system via computer simulations of each variant case. Simulations were repeated assuming both an idealized and a realistic MAEB system. For each crash case, the results in the baseline case and in the variants were compared. A total of 36 crash cases representing 11 common crash scenarios were selected from 3 Australian in-depth data sets: 12 cases from New South Wales, 13 cases from Victoria, and 11 cases from South Australia. The reduction in impact speed elicited by MAEB in the baseline cases ranged from 2.8 to 10.0 km/h. The baseline cases over- or underestimated the mean impact speed reduction of the variant cases by up to 20%. Constraints imposed by simulating more realistic capabilities for an MAEB system produced a decrease in the estimated impact speed reduction of up to 14% (mean 5%) compared to an idealized system. The small difference between the baseline and variant case results demonstrates that the potential effects of MAEB computed from the cases described in in-depth crash reports are typically a good approximation, despite limitations of postcrash investigation. Furthermore, given that MAEB intervenes very close to the point of impact, limitations of the currently available technologies were not found to have a dramatic influence on the effects of the system.

Cost of Crashes Related to Road Conditions, United States, 2006

PubMed Central

Zaloshnja, Eduard; Miller, Ted R.

2009-01-01

This is the first study to estimate the cost of crashes related to road conditions in the U.S. To model the probability that road conditions contributed to the involvement of a vehicle in the crash, we used 2000–03 Large Truck Crash Causation Study (LTCCS) data, the only dataset that provides detailed information whether road conditions contributed to crash occurrence. We applied the logistic regression results to a costed national crash dataset in order to calculate the probability that road conditions contributed to the involvement of a vehicle in each crash. In crashes where someone was moderately to seriously injured (AIS-2-6) in a vehicle that harmfully impacted a large tree or medium or large non-breakaway pole, or if the first harmful event was collision with a bridge, we changed the calculated probability of being road-related to 1. We used the state distribution of costs of fatal crashes where road conditions contributed to crash occurrence or severity to estimate the respective state distribution of non-fatal crash costs. The estimated comprehensive cost of traffic crashes where road conditions contributed to crash occurrence or severity was $217.5 billion in 2006. This represented 43.6% of the total comprehensive crash cost. The large share of crash costs related to road design and conditions underlines the importance of these factors in highway safety. Road conditions are largely controllable. Road maintenance and upgrading can prevent crashes and reduce injury severity. PMID:20184840

The impact of Michigan's text messaging restriction on motor vehicle crashes.

PubMed

Ehsani, Johnathon P; Bingham, C Raymond; Ionides, Edward; Childers, David

2014-05-01

The purpose of this study was to determine the effects of Michigan's universal text messaging restriction (effective July 2010) across different age groups of drivers and crash severities. Changes in monthly crash rates and crash trends per 10,000 licensed drivers aged 16, 17, 18, 19, 20-24, and 25-50 years were estimated using time series analysis for three levels of crash severity: (1) fatal/disabling injury; (2) nondisabling injury; and (3) possible injury/property damage only (PDO) crashes for the period 2005-2012. Analyses were adjusted for crash rates of drivers' aged 65-99 years, Michigan's unemployment rate, and gasoline prices. After the introduction of the texting restriction, significant increases were observed in crash rates and monthly trends in fatal/disabling injury crashes and nondisabling injury crashes, and significant decreases in possible injury/PDO crashes. The magnitude of the effects where significant changes were observed was small. The introduction of the texting restriction was not associated with a reduction in crash rates or trends in severe crash types. On the contrary, small increases in the most severe crash types (fatal/disabling and nondisabling injury) and small decreases in the least severe crash types (possible injury/PDO) were observed. These findings extend the literature on the effects of cell phone restrictions by examining the effects of the restriction on newly licensed adolescent drivers and adult drivers separately by crash severity. Published by Elsevier Inc.

The impact of the housing crash on the wealth of the baby boom cohorts.

PubMed

Rosnick, David; Baker, Dean

2010-04-01

The collapse of the housing bubble and the resulting plunge in the stock market destroyed more than $10 trillion in household wealth. The impact was especially severe for the baby boom cohorts who are at or near retirement age. This paper uses data from the Federal Reserve Board's 2007 Survey of Consumer Finances to compare the wealth of the baby boomer cohorts just before the crash with projections of household wealth following the crash. These projections show that most baby boomers will be almost entirely dependent on their Social Security income after they stop working.

Modular disposable can (MODCAN) crash cushion: A concept investigation

NASA Technical Reports Server (NTRS)

Knoell, A.; Wilson, A.

1976-01-01

A conceptual design investigation of an improved highway crash cushion system is presented. The system is referred to as a modular disposable can (MODCAN) crash system. It is composed of a modular arrangement of disposable metal beverage cans configured to serve as an effective highway impact attenuation system. Experimental data, design considerations, and engineering calculations supporting the design development are presented. Design performance is compared to that of a conventional steel drum system. It is shown that the MODCAN concepts offers the potential for smoother and safer occupant deceleration for a larger class of vehicle impact weights than the steel drum device.

Head impact mechanisms of a child occupant seated in a child restraint system as determined by impact testing.

PubMed

Yoshida, Ryoichi; Okada, Hiroshi; Nomura, Mitsunori; Mizuno, Koji; Tanaka, Yoshinori; Hosokawa, Naruyuki

2011-11-01

In side collision accidents, the head is the most frequently injured body region for child occupants seated in a child restraint system (CRS). Accident analyses show that a child's head can move out of the CRS shell, make hard contact with the vehicle interior, and thus sustain serious injuries. In order to improve child head protection in side collisions, it is necessary to understand the injury mechanism of a child in the CRS whose head makes contact with the vehicle interior. In this research, an SUV-to-car oblique side crash test was conducted to reconstruct such head contacts. A Q3s child dummy was seated in a CRS in the rear seat of the target car. The Q3s child dummy's head moved out beyond the CRS side wing, moved laterally, and made contact with the side window glass and the doorsill. It was demonstrated that the hard head contact, which produced a high HIC value, could occur in side collisions. A series of sled tests was carried out to reproduce the dummy kinematic behavior observed in the SUV-to-car crash test, and the sled test conditions such as sled angle, ECE seat slant angle and velocity-time history that duplicated the kinematic behavior were determined. A parametric study also was conducted with the sled tests; and it was found that the impact angle, harness slack, chest clip, and the CRS side wing shape affected the torso motion and head contact with the vehicle interior.

Effect of crash pulse shape on seat stroke requirements for limiting loads on occupants of aircraft

NASA Technical Reports Server (NTRS)

Carden, Huey D.

1992-01-01

An analytical study was made to provide comparative information on various crash pulse shapes that potentially could be used to test seats under conditions included in Federal Regulations Part 23 Paragraph 23.562(b)(1) for dynamic testing of general aviation seats, show the effects that crash pulse shape can have on the seat stroke requirements necessary to maintain a specified limit loading on the seat/occupant during crash pulse loadings, compare results from certain analytical model pulses with approximations of actual crash pulses, and compare analytical seat results with experimental airplace crash data. Structural and seat/occupant displacement equations in terms of the maximum deceleration, velocity change, limit seat pan load, and pulse time for five potentially useful pulse shapes were derived; from these, analytical seat stroke data were obtained for conditions as specified in Federal Regulations Part 23 Paragraph 23.562(b)(1) for dynamic testing of general aviation seats.

Integration of Active and Passive Safety Technologies--A Method to Study and Estimate Field Capability.

PubMed

Hu, Jingwen; Flannagan, Carol A; Bao, Shan; McCoy, Robert W; Siasoco, Kevin M; Barbat, Saeed

2015-11-01

The objective of this study is to develop a method that uses a combination of field data analysis, naturalistic driving data analysis, and computational simulations to explore the potential injury reduction capabilities of integrating passive and active safety systems in frontal impact conditions. For the purposes of this study, the active safety system is actually a driver assist (DA) feature that has the potential to reduce delta-V prior to a crash, in frontal or other crash scenarios. A field data analysis was first conducted to estimate the delta-V distribution change based on an assumption of 20% crash avoidance resulting from a pre-crash braking DA feature. Analysis of changes in driver head location during 470 hard braking events in a naturalistic driving study found that drivers' head positions were mostly in the center position before the braking onset, while the percentage of time drivers leaning forward or backward increased significantly after the braking onset. Parametric studies with a total of 4800 MADYMO simulations showed that both delta-V and occupant pre-crash posture had pronounced effects on occupant injury risks and on the optimal restraint designs. By combining the results for the delta-V and head position distribution changes, a weighted average of injury risk reduction of 17% and 48% was predicted by the 50th percentile Anthropomorphic Test Device (ATD) model and human body model, respectively, with the assumption that the restraint system can adapt to the specific delta-V and pre-crash posture. This study demonstrated the potential for further reducing occupant injury risk in frontal crashes by the integration of a passive safety system with a DA feature. Future analyses considering more vehicle models, various crash conditions, and variations of occupant characteristics, such as age, gender, weight, and height, are necessary to further investigate the potential capability of integrating passive and DA or active safety systems.

Injury Outcome in Crashes with Guardrail End Terminals.

PubMed

Johnson, Nicholas S; Gabler, Hampton C

2015-01-01

The goal of this study is to evaluate the crash performance of guardrail end terminals in real-world crashes. Guardrail end terminals are installed at the ends of guardrail systems to prevent the rail from spearing through the car in an end-on collision. Recently, there has been a great deal of controversy as to the safety of certain widely used end terminal designs, partly because there is surprisingly little real-world crash data for end terminals. Most existing studies of end terminal crashes used data from prior to the mid-1990s. Since then, there have been large improvements to vehicle crashworthiness and seat belt usage rates, as well as new roadside safety hardware compliant with National Cooperative Highway Research Program (NCHRP) Report 350, "Recommended Procedures for the Safety Performance Evaluation of Highway Features." Additionally, most existing studies of injury in end terminal crashes do not account for factors such as the occurrence of rollover. This analysis uses more recent crash data that represent post-1990s vehicle fleet changes and account for a number of factors that may affect driver injury outcome and rollover occurrence. Passenger vehicle crashes coded as involving guardrail end terminals were identified in the set of police-reported crashes in Michigan in 2011 and 2012. End terminal performance was expected to be a function of end terminal system design. State crash databases generally do not identify specific end terminal systems. In this study, the coded crash location was used to obtain photographs of the crash site prior to the crash from Google Street View. These site photographs were manually inspected to identify the particular end terminal system involved in the crash. Multiple logistic regression was used to test for significant differences in the odds of driver injury and rollover between different terminal types while accounting for other factors. A total of 1,001 end terminal crashes from the 2011-2012 Michigan State crash data were manually inspected to identify the terminal that had been struck. Four hundred fifty-one crashes were found to be suitable for analysis. Serious to fatal driver injury occurred in 3.8% of end terminal crashes, moderate to fatal driver injury occurred in 11.8%, and 72.3% involved property damage only. No significant difference in moderate to fatal driver injury odds was observed between NCHRP 350 compliant end terminals and noncompliant terminals. Car drivers showed odds of moderate to fatal injury 3.6 times greater than LTV drivers in end terminal crashes. Rollover occurrence was not significantly associated with end terminal type. Car drivers have greater potential for injury in end terminal crashes than light truck/van/sport utility vehicle drivers. End terminal designs compliant with NCHRP 350 did not appear to carry different odds of moderate driver injury than noncompliant end terminals. The findings account for driver seat belt use, rollover occurrence, terminal orientation (leading/trailing), control loss, and the number of impact events. Rollover and nonuse of seat belts carried much larger increases in injury potential than end terminal type. Rollover did not appear to be associated with NCHRP 350 compliance.

Transport company safety climate-The impact on truck driver behavior and crash involvement.

PubMed

Sullman, Mark J M; Stephens, Amanda N; Pajo, Karl

2017-04-03

The present study investigated the relationships between safety climate and driving behavior and crash involvement. A total of 339 company-employed truck drivers completed a questionnaire that measured their perceptions of safety climate, crash record, speed choice, and aberrant driving behaviors (errors, lapses, and violations). Although there was no direct relationship between the drivers' perceptions of safety climate and crash involvement, safety climate was a significant predictor of engagement in risky driving behaviors, which were in turn predictive of crash involvement. This research shows that safety climate may offer an important starting point for interventions aimed at reducing risky driving behavior and thus fewer vehicle collisions.

Support vector machine in crash prediction at the level of traffic analysis zones: Assessing the spatial proximity effects.

PubMed

Dong, Ni; Huang, Helai; Zheng, Liang

2015-09-01

In zone-level crash prediction, accounting for spatial dependence has become an extensively studied topic. This study proposes Support Vector Machine (SVM) model to address complex, large and multi-dimensional spatial data in crash prediction. Correlation-based Feature Selector (CFS) was applied to evaluate candidate factors possibly related to zonal crash frequency in handling high-dimension spatial data. To demonstrate the proposed approaches and to compare them with the Bayesian spatial model with conditional autoregressive prior (i.e., CAR), a dataset in Hillsborough county of Florida was employed. The results showed that SVM models accounting for spatial proximity outperform the non-spatial model in terms of model fitting and predictive performance, which indicates the reasonableness of considering cross-zonal spatial correlations. The best model predictive capability, relatively, is associated with the model considering proximity of the centroid distance by choosing the RBF kernel and setting the 10% of the whole dataset as the testing data, which further exhibits SVM models' capacity for addressing comparatively complex spatial data in regional crash prediction modeling. Moreover, SVM models exhibit the better goodness-of-fit compared with CAR models when utilizing the whole dataset as the samples. A sensitivity analysis of the centroid-distance-based spatial SVM models was conducted to capture the impacts of explanatory variables on the mean predicted probabilities for crash occurrence. While the results conform to the coefficient estimation in the CAR models, which supports the employment of the SVM model as an alternative in regional safety modeling. Copyright © 2015 Elsevier Ltd. All rights reserved.

"Crashing the gates" - selection criteria for television news reporting of traffic crashes.

PubMed

De Ceunynck, Tim; De Smedt, Julie; Daniels, Stijn; Wouters, Ruud; Baets, Michèle

2015-07-01

This study investigates which crash characteristics influence the probability that the crash is reported in the television news. To this purpose, all news items from the period 2006-2012 about traffic crashes from the prime time news of two Belgian television channels are linked to the official injury crash database. Logistic regression models are built for the database of all injury crashes and for the subset of fatal crashes to identify crash characteristics that correlate with a lower or higher probability of being reported in the news. A number of significant biases in terms of crash severity, time, place, types of involved road users and victims' personal characteristics are found in the media reporting of crashes. More severe crashes are reported in the media more easily than less severe crashes. Significant fluctuations in media reporting probability through time are found in terms of the year and month in which the crash took place. Crashes during week days are generally less reported in the news. The geographical area (province) in which the crash takes place also has a significant impact on the probability of being reported in the news. Crashes on motorways are significantly more represented in the news. Regarding the age of the involved victims, a clear trend of higher media reporting rates of crashes involving young victims or young fatalities is observed. Crashes involving female fatalities are also more frequently reported in the news. Furthermore, crashes involving a bus have a significantly higher probability of being reported in the news, while crashes involving a motorcycle have a significantly lower probability. Some models also indicate a lower reporting rate of crashes involving a moped, and a higher reporting rate of crashes involving heavy goods vehicles. These biases in media reporting can create skewed perceptions in the general public about the prevalence of traffic crashes and eventually may influence people's behaviour. Copyright © 2015 Elsevier Ltd. All rights reserved.

Patterns of drug use in fatal crashes.

PubMed

Romano, Eduardo; Pollini, Robin A

2013-08-01

To characterize drug prevalence among fatally injured drivers, identify significant associations (i.e. day of week, time of day, age, gender), and compare findings with those for alcohol. Descriptive and logistic mixed-model regression analyses of Fatality Analysis Reporting System data. US states with drug test results for >80% of fatally injured drivers, 1998-2010. Drivers killed in single-vehicle crashes on public roads who died at the scene of the crash (n = 16 942). Drug test results, blood alcohol concentration (BAC), gender, age and day and time of crash. Overall, 45.1% of fatally injured drivers tested positive for alcohol (39.9% BAC ≥ 0.08) and 25.9% for drugs. The most common drugs present were stimulants (7.2%) and cannabinols (7.1%), followed by 'other' drugs (4.1%), multiple drugs (4.1%), narcotics (2.1%) and depressants (1.5%). Drug-involved crashes occurred with relative uniformity throughout the day while alcohol-involved crashes were more common at night (P < 0.01). The odds of testing positive for drugs varied depending upon drug class, driver characteristics, time of day and the presence of alcohol. Fatal single-vehicle crashes involving drugs are less common than those involving alcohol and the characteristics of drug-involved crashes differ, depending upon drug class and whether alcohol is present. Concerns about drug-impaired driving should not detract from the current law enforcement focus on alcohol-impaired driving. © 2013 Society for the Study of Addiction.

Advanced Crash Avoidance Technologies (ACAT) Program - Final Report of the Volvo-Ford-UMTRI Project: Safety Impact Methodology for Lane Departure Warning - Method Development and Estimation of Benefits

DOT National Transportation Integrated Search

2010-10-01

The Volvo-Ford-UMTRI project: Safety Impact Methodology (SIM) for Lane Departure Warning is part of the U.S. Department of Transportation's Advanced Crash Avoidance Technologies (ACAT) program. The project developed a basic analytical framework for e...

Impact of a graduated driver's license law on crashes involving young drivers in New York State.

PubMed

Cheng, Julius D; Schubmehl, Heidi; Kahn, Steven A; Gestring, Mark L; Sangosanya, Ayodele; Stassen, Nicole A; Bankey, Paul E

2012-08-01

Motor vehicle crashes constitute the greatest risk of injury for young adults. Graduated driver licensing (GDL) laws have been used to reduce the number of injuries and deaths in the young driver population. The New York State GDL law increased supervision of young driver and limited both time-of-day driven and number of passengers. This review examines the impact of a GDL enacted in New York in September 2003. A retrospective review of New York State administrative databases from 2001 to 2009 was performed. During this period, a state-wide GDL requirement was implemented. Database review included all reported crashes to the New York State Department of Motor Vehicles by cause and driver age as well as motor fuel tax receipts by the New York State Comptroller's Office. Motor fuel tax receipts and consumption information were used as a proxy for overall miles driven. Before 2003, drivers younger than 18 years were involved in 90 fatal crashes and 10,406 personal-injury (PI) crashes, constituting 4.49% and 3.38% of all fatal and PI crashes in New York State, respectively. By 2009, the number of fatal and PI crashes involving drivers who are younger than 18 years decreased to 44 (2.87%) and 5,246 (2.24%), respectively. Of note, the number of crashes experienced by the age group 18 years to 20 years during this period also declined, from 192 (9.59% of all fatal crashes) and 25,407 (8.24% of all PI crashes) to 135 (8.81%) and 18,114 (7.73%), respectively. Overall numbers of crashes reported remained relatively stable, between 549,000 in 2001 and 520,000 in 2009. Motor fuel use during this period also declined, but to a lesser degree ($552 million to $516 million or 6.6%). The use of a GDL law in New York State has shown a large decrease in the number of fatalities and PI crashes involving young drivers. The delay in full driver privileges from the GDL did not result in an increase in fatal or PI crashes in the next older age group.

Seat belts are more effective than airbags in reducing thoracic aortic injury in frontal motor vehicle crashes.

PubMed

Brasel, Karen J; Quickel, Robert; Yoganandan, Narayan; Weigelt, John A

2002-08-01

Airbags reduce the probability of death in frontal collisions, but the effect is small compared with seat belts. Little is known about the influence of seat belts and airbags on the incidence of thoracic aortic injury (TAI). The National Automotive Sampling System database was queried for the years 1993 to 1998 to determine the impact of seat belts and airbags on the incidence of TAI in survivors of frontal motor vehicle crashes. Proportions were compared using the two-sample Z test. Seat belts prevent TAI regardless of airbag deployment. The effect of airbags is limited to those wearing seat belts. In frontal collisions without seat belt use, airbag deployment does not alter TAI incidence. Seat belts are considerably more effective in preventing TAI than airbags after frontal motor vehicle crashes. Prevention efforts should continue to emphasize the use of active restraints. Restraint use should be considered a risk factor in evaluating patients for potential TAI.

Change in velocity and energy dissipation on impact in motor vehicle crashes as a function of the direction of crash: key factors in the production of thoracic aortic injuries, their pattern of associated injuries and patient survival. A Crash Injury Research Engineering Network (CIREN) study.

PubMed

Siegel, John H; Smith, Joyce A; Siddiqi, Shabana Q

2004-10-01

To examine the effect of change in velocity (MV) and energy dissipation (IE) on impact, above and below the test levels for federal motor vehicle crash (MVC) safety standards, on the incidence of aortic injury (AI) and its mortality and associated injury patterns in frontal (F) and lateral (L) MVCs. Comparison of 80 AI and 796 non-AI patients of AIS=3. Eight hundred seventy-six MVC adult drivers or front-seat passengers (552 F and 324 L) evaluated by 10 Level I CIREN study Trauma Centers together with vehicle and crash scene engineering reconstruction. Patient seatbelt and/or airbag use correlated with clinical or autopsy findings. In AI, 63% of cases were dead at the scene and only 16% survived to leave hospital. The relation between IE dissipated in the MVC and the DeltaV on impact was exponential as DeltaV increased, but the rise in IE for a given DeltaV was greater in LMVC than in FMVC (p <0.05). A more rapid rise in IE/DeltaV occurred above the mean DeltaV of 48 +/- 19.7 kph (30 mph) in FMVC and above the mean DeltaV of 36 +/- 16.2 kph (23 mph) in LMVC. As DeltaV increased above these means, 65% of 46 FMVC aortic injuries (AIs) and 64% of 34 LMVC AIs occurred. In AI patients there was evidence of focusing of the point of IE impact on the upper chest with a higher incidence of rib1-4 fractures than in non-AI (p <0.01) and more brain, heart, lung and spleen injuries (p <0.01) consequent to lower seatbelt use (p <0.01), but LMVC also had more pelvic fx (p <0.05). Airbags + seatbelts in FMVC and seatbelts in LMVC reduced mortality (p <0.05) Comparison of AI incidence in three successive 4-year vehicle model year periods showed a progressive decrease as new safety devices were introduced (p < 0.05). The implications for AI of the focused IE at the upper chest suggest a probable mechanism for MVC AI with the pressurized aortic arch acting as the long arm of a lever system with the fulcrum at the subclavian artery, producing maximum torsional strain at the short arm of the isthmus where 75% of the AIs occurred. AI mortality is also influenced by the associated injuries. To develop more effective safety systems to prevent AI, MVC safety testing with airbags and seatbelts should be carried out at DeltaVs of 1 SD above means for FMVC and LMVC.

Head injury causation scenarios for belted, rear-seated children in frontal impacts.

PubMed

Bohman, Katarina; Arbogast, Kristy B; Bostrom, Ola

2011-02-01

Head injuries are the most common serious injuries sustained by children in motor vehicle crashes and are of critical importance with regard to long-term disability. There is a lack of understanding of how seat belt-restrained children sustain head injuries in frontal impacts. The aim of the study was to identify the AIS2+ head injury causation scenarios for rear-seated, belt-restrained children in frontal impacts, including the set of parameters contributing to the injury. In-depth crash investigations from two National Highway Traffic Safety Administration (NHTSA) databases, the National Automotive Sampling System-Crashworthiness Data System (NASS-CDS; 1997-2008) and the Crash Injury Research and Engineering Network (CIREN; 1996-2009), were collected and analyzed in detail. Selection criteria were all frontal impacts with principal direction of force (PDOF) of 11, 12, and 1 o'clock involving rear-seated, three-point belt-restrained, with or without booster cushion, children from 3 to 13 years with an AIS2+ head injury. Cases were analyzed using the BioTab method of injury causation assessment in order to systematically analyze the injury causation scenario for each case. There were 27 cases meeting the inclusion criteria, 19 cases with MAIS2 head injuries and 8 cases with MAIS3+ head injuries, including 2 fatalities. Three major injury causation scenarios were identified, including head contact with seatback (10 cases), head contact with side interior (7 cases,) and no evidence of head contact (9 cases). Head injuries with seatback or side interior contact typically included a PDOF greater than 10 degree (similar to the Insurance Institute for Highway Safety [IIHS] and EuroNCAP offset frontal testing) and vehicle maneuvers. For seatback contact, the vehicle's movements contributed to occupant kinematics inboard the vehicle, causing a less than optimal restraint of the torso and/or torso roll out of the shoulder belt. For side interior contact, the PDOF and/or maneuvers forced the occupant toward the side interior. The cases without evidence of head/face contact were characterized by high crash severity and accompanied by severe injuries to the thorax and spine. These data lead to increased understanding of the injury patterns and causation in this crash restraint scenario so that interventions to mitigate the burden of injury can be advanced.

The effects of age on crash risk associated with driver distraction.

PubMed

Guo, Feng; Klauer, Sheila G; Fang, Youjia; Hankey, Jonathan M; Antin, Jonathan F; Perez, Miguel A; Lee, Suzanne E; Dingus, Thomas A

2017-02-01

Driver distraction is a major contributing factor to crashes, which are the leading cause of death for the US population under 35 years of age. The prevalence of secondary-task engagement and its impacts on distraction and crashes may vary substantially by driver age. Driving performance and behaviour data were collected continuously using multiple cameras and sensors in situ for 3542 participant drivers recruited for up to 3 years for the Second Strategic Highway Research Program Naturalistic Driving Study. Secondary-task engagement at the onset of crashes and during normal driving segments was identified from videos. A case-cohort approach was used to estimate the crash odds ratios associated with, and the prevalence of, secondary tasks for four age groups: 16-20, 21-29, 30-64 and 65-98 years of age. Only severe crashes (property damage and higher severity) were included in the analysis. Secondary-task-induced distraction posed a consistently higher threat for drivers younger than 30 and above 65 when compared with middle-aged drivers, although senior drivers engaged in secondary tasks much less frequently than their younger counterparts. Secondary tasks with high visual-manual demand (e.g. visual-manual tasks performed on cell phones) affected drivers of all ages. Certain secondary tasks, such as operation of in-vehicle devices and talking/singing, increased the risk for only certain age groups. Teenaged, young adult drivers and senior drivers are more adversely impacted by secondary-task engagement than middle-aged drivers. Visual-manual distractions impact drivers of all ages, whereas cognitive distraction may have a larger impact on young drivers. © The Author 2016; all rights reserved. Published by Oxford University Press on behalf of the International Epidemiological Association

Side impact crashes--factors affecting incidence and severity: review of the literature.

PubMed

Chipman, Mary L

2004-03-01

Many traffic crashes are side impact collisions resulting in significant death and injury. A review was conducted of the evidence of driver, road, and vehicle characteristics affecting either the risk of occurrence or the severity of injury in such crashes for papers published from 1996 to early 2003. For drivers, evidence was found of increased crash risk or injury severity only for age and age-related medical conditions (e.g., dementia). Traffic roundabouts and other traffic control devices--stop signs, traffic lights, and so on--had mixed results; traffic controls were better than no controls, but their effectiveness varied with circumstance. Most vehicle characteristics have had little or no effect on crash occurrence. Antilock braking systems (ABS) in the striking vehicle had been anticipated to reduce the risk of crashes, but so far have demonstrated little effect. The primary emphasis in vehicle design has been on protective devices to reduce the severity of injury. Disparity in the size of the two vehicles, especially when the struck vehicle is smaller and lighter, is almost a consistent risk factor for occupant injury. The occupants of light trucks, however, when struck by passengers cars on the opposite side, were at higher risk of injury. Wearing seat belts had a consistently protective effect; airbags did not, but there were few studies, and no field studies, of lateral airbags found. Of all the characteristics examined, vehicle design, including occupant restraints, is the most easily modified in the short term, although road design, traffic control, and the monitoring of older drivers may also prove effective in reducing side impact crashes in the longer term.

Rage against the machine? Google's self-driving cars versus human drivers.

PubMed

Teoh, Eric R; Kidd, David G

2017-12-01

Automated driving represents both challenges and opportunities in highway safety. Google has been developing self-driving cars and testing them under employee supervision on public roads since 2009. These vehicles have been involved in several crashes, and it is of interest how this testing program compares to human drivers in terms of safety. Google car crashes were coded by type and severity based on narratives released by Google. Crash rates per million vehicle miles traveled (VMT) were computed for crashes deemed severe enough to be reportable to police. These were compared with police-reported crash rates for human drivers. Crash types also were compared. Google cars had a much lower rate of police-reportable crashes per million VMT than human drivers in Mountain View, Calif., during 2009-2015 (2.19 vs 6.06), but the difference was not statistically significant. The most common type of collision involving Google cars was when they got rear-ended by another (human-driven) vehicle. Google cars shared responsibility for only one crash. These results suggest Google self-driving cars, while a test program, are safer than conventional human-driven passenger vehicles; however, currently there is insufficient information to fully examine the extent to which disengagements affected these results. Results suggest that highly-automated vehicles can perform more safely than human drivers in certain conditions, but will continue to be involved in crashes with conventionally-driven vehicles. Copyright © 2017. Published by Elsevier Ltd.

Multi-Terrain Impact Testing and Simulation of a Composite Energy Absorbing Fuselage Section

NASA Technical Reports Server (NTRS)

Fasanella, Edwin L.; Jackson, Karen E.; Lyle, Karen H.; Sparks, Chad E.; Sareen, Ashish K.

2007-01-01

Comparisons of the impact performance of a 5-ft diameter crashworthy composite fuselage section were investigated for hard surface, soft soil, and water impacts. The fuselage concept, which was originally designed for impacts onto a hard surface only, consisted of a stiff upper cabin, load bearing floor, and an energy absorbing subfloor. Vertical drop tests were performed at 25-ft/s onto concrete, soft-soil, and water at NASA Langley Research Center. Comparisons of the peak acceleration values, pulse durations, and onset rates were evaluated for each test at specific locations on the fuselage. In addition to comparisons of the experimental results, dynamic finite element models were developed to simulate each impact condition. Once validated, these models can be used to evaluate the dynamic behavior of subfloor components for improved crash protection for hard surface, soft soil, and water impacts.

Multi-Terrain Impact Testing and Simulation of a Composite Energy Absorbing Fuselage Section

NASA Technical Reports Server (NTRS)

Fasanella, Edwin L.; Lyle, Karen H.; Sparks, Chad E.; Sareen, Ashish K.

2004-01-01

Comparisons of the impact performance of a 5-ft diameter crashworthy composite fuselage section were investigated for hard surface, soft soil, and water impacts. The fuselage concept, which was originally designed for impacts onto a hard surface only, consisted of a stiff upper cabin, load bearing floor, and an energy absorbing subfloor. Vertical drop tests were performed at 25-ft/s onto concrete, soft-soil, and water at NASA Langley Research Center. Comparisons of the peak acceleration values, pulse durations, and onset rates were evaluated for each test at specific locations on the fuselage. In addition to comparisons of the experimental results, dynamic finite element models were developed to simulate each impact condition. Once validated, these models can be used to evaluate the dynamic behavior of subfloor components for improved crash protection for hard surface, soft soil, and water impacts.

Test-Analysis Correlation of a Crash Simulation of a Vertical Drop Test of a Commuter-Category Aircraft

NASA Technical Reports Server (NTRS)

Jackson, Karen E.; Fasanella, Edwin L.

2004-01-01

A finite element model of an ATR42-300 commuter-class aircraft was developed and a crash simulation was executed. Analytical predictions were correlated with data obtained from a 30-feet per second (9.14-meters per second) vertical drop test of the aircraft. The purpose of the test was to evaluate the structural response of the aircraft when subjected to a severe, but survivable, impact. The aircraft was configured with seats, dummies, luggage, and other ballast. The wings were filled with 8,700 lb. (3,946 kilograms) of water to represent the fuel. The finite element model, which consisted of 57,643 nodes and 62,979 elements, was developed from direct measurements of the airframe geometry. The seats, dummies, luggage, simulated engines and fuel, and other ballast were represented using concentrated masses. The model was executed in LS-DYNA, a commercial finite element code for performing explicit transient dynamic simulations. Analytical predictions of structural deformation and selected time-history responses were correlated with experimental data from the drop test to validate the simulation.

Construct exploit constraint in crash analysis by bypassing canary

NASA Astrophysics Data System (ADS)

Huang, Ning; Huang, Shuguang; Huang, Hui; Chang, Chao

2017-08-01

Selective symbolic execution is a common program testing technology. Developed on the basis of it, some crash analysis systems are often used to test the fragility of the program by constructing exploit constraints, such as CRAX. From the study of crash analysis based on symbolic execution, this paper find that this technology cannot bypass the canary stack protection mechanisms. This paper makes the improvement uses the API hook in Linux. Experimental results show that the use of API hook can effectively solve the problem that crash analysis cannot bypass the canary protection.

Crash Certification by Analysis - Are We There Yet?

NASA Technical Reports Server (NTRS)

Jackson, Karen E.; Fasanella, Edwin L.; Lyle, Karen H.

2006-01-01

This paper addresses the issue of crash certification by analysis. This broad topic encompasses many ancillary issues including model validation procedures, uncertainty in test data and analysis models, probabilistic techniques for test-analysis correlation, verification of the mathematical formulation, and establishment of appropriate qualification requirements. This paper will focus on certification requirements for crashworthiness of military helicopters; capabilities of the current analysis codes used for crash modeling and simulation, including some examples of simulations from the literature to illustrate the current approach to model validation; and future directions needed to achieve "crash certification by analysis."

Fall Protection Characteristics of Safety Belts and Human Impact Tolerance.

PubMed

Hino, Yasumichi; Ohdo, Katsutoshi; Takahashi, Hiroki

2014-08-23

Many fatal accidents due to falls from heights have occurred at construction sites not only in Japan but also in other countries. This study aims to determine the fall prevention performance of two types of safety belts: a body belt 1) , which has been used for more than 40 yr in the Japanese construction industry as a general type of safety equipment for fall accident prevention, and a full harness 2, 3) , which has been used in many other countries. To determine human tolerance for impact trauma, this study discusses features of safety belts with reference 4-9) to relevant studies in the medical science, automobile crash safety, and aircrew safety. For this purpose, simple drop tests were carried out in a virtual workplace to measure impact load, head acceleration, and posture in the experiments, the Hybrid-III pedestrian model 10) was used as a human dummy. Hybrid-III is typically employed in official automobile crash tests (New Car Assessment Program: NCAP) and is currently recognized as a model that faithfully reproduces dynamic responses. Experimental results shows that safety performance strongly depends on both the variety of safety belts used and the shock absorbers attached onto lanyards. These findings indicate that fall prevention equipment, such as safety belts, lanyards, and shock absorbers, must be improved to reduce impact injuries to the human head and body during falls.

Fall protection characteristics of safety belts and human impact tolerance.

PubMed

Hino, Yasumichi; Ohdo, Katsutoshi; Takahashi, Hiroki

2014-01-01

Many fatal accidents due to falls from heights have occurred at construction sites not only in Japan but also in other countries. This study aims to determine the fall prevention performance of two types of safety belts: a body belt, which has been used for more than 40 yr in the Japanese construction industry as a general type of safety equipment for fall accident prevention, and a full harness, which has been used in many other countries. To determine human tolerance for impact trauma, this study discusses features of safety belts with reference to relevant studies in the medical science, automobile crash safety, and aircrew safety. For this purpose, simple drop tests were carried out in a virtual workplace to measure impact load, head acceleration, and posture in the experiments, the Hybrid-III pedestrian model was used as a human dummy. Hybrid-III is typically employed in official automobile crash tests (New Car Assessment Program: NCAP) and is currently recognized as a model that faithfully reproduces dynamic responses. Experimental results shows that safety performance strongly depends on both the variety of safety belts used and the shock absorbers attached onto lanyards. These findings indicate that fall prevention equipment, such as safety belts, lanyards, and shock absorbers, must be improved to reduce impact injuries to the human head and body during falls.

Fall Protection Characteristics of Safety Belts and Human Impact Tolerance

PubMed Central

HINO, Yasumichi; OHDO, Katsutoshi; TAKAHASHI, Hiroki

2014-01-01

Abstract: Many fatal accidents due to falls from heights have occurred at construction sites not only in Japan but also in other countries. This study aims to determine the fall prevention performance of two types of safety belts: a body belt1), which has been used for more than 40 yr in the Japanese construction industry as a general type of safety equipment for fall accident prevention, and a full harness2, 3), which has been used in many other countries. To determine human tolerance for impact trauma, this study discusses features of safety belts with reference4,5,6,7,8,9) to relevant studies in the medical science, automobile crash safety, and aircrew safety. For this purpose, simple drop tests were carried out in a virtual workplace to measure impact load, head acceleration, and posture in the experiments, the Hybrid-III pedestrian model10) was used as a human dummy. Hybrid-III is typically employed in official automobile crash tests (New Car Assessment Program: NCAP) and is currently recognized as a model that faithfully reproduces dynamic responses. Experimental results shows that safety performance strongly depends on both the variety of safety belts used and the shock absorbers attached onto lanyards. These findings indicate that fall prevention equipment, such as safety belts, lanyards, and shock absorbers, must be improved to reduce impact injuries to the human head and body during falls. PMID:25345426

The Effect of Alcohol and Road Traffic Policies on Crash Rates in Botswana, 2004–2011: A Time-Series Analysis

PubMed Central

Sebego, Miriam; Naumann, Rebecca B.; Rudd, Rose A.; Voetsch, Karen; Dellinger, Ann M.; Ndlovu, Christopher

2015-01-01

In Botswana, increased development and motorization have brought increased road traffic-related death rates. Between 1981 and 2001, the road traffic-related death rate in Botswana more than tripled. The country has taken several steps over the last several years to address the growing burden of road traffic crashes and particularly to address the burden of alcohol-related crashes. This study examines the impact of the implementation of alcohol and road safety-related policies on crash rates, including overall crash rates, fatal crash rates, and single-vehicle nighttime fatal (SVNF) crash rates, in Botswana from 2004 to 2011. The overall crash rate declined significantly in June 2009 and June 2010, such that the overall crash rate from June 2010 to December 2011 was 22% lower than the overall crash rate from January 2004 to May 2009. Additionally, there were significant declines in average fatal crash and SVNF crash rates in early 2010. Botswana’s recent crash rate reductions occurred during a time when aggressive policies and other activities (e.g., education, enforcement) were implemented to reduce alcohol consumption and improve road safety. While it is unclear which of the policies or activities contributed to these declines and to what extent, these reductions are likely the result of several, combined efforts. PMID:24686164

The Impact of Michigan’s Partial Repeal of the Universal Motorcycle Helmet Law on Helmet Use, Fatalities, and Head Injuries

PubMed Central

Carter, Patrick M.; Buckley, Lisa; Flannagan, Carol A. C.; Cicchino, Jessica B.; Hemmila, Mark; Bowman, Patrick J.; Almani, Farideh; Bingham, C. Raymond

2017-01-01

Objectives To evaluate the impact of the partial repeal of Michigan’s universal motorcycle helmet law on helmet use, fatalities, and head injuries. Methods We compared helmet use rates and motorcycle crash fatality risk for the 12 months before and after the April 13, 2012, repeal with a statewide police-reported crash data set. We linked police-reported crashes to injured riders in a statewide trauma registry. We compared head injury before and after the repeal. Regression examined the effect of helmet use on fatality and head injury risk. Results Helmet use decreased in crash (93.2% vs 70.8%; P < .001) and trauma data (91.1% vs 66.2%; P < .001) after the repeal. Although fatalities did not change overall (3.3% vs 3.2%; P = .87), head injuries (43.4% vs 49.6%; P < .05) and neurosurgical intervention increased (3.7% vs 6.5%; P < .05). Male gender (adjusted odds ratio [AOR] = 1.65), helmet nonuse (AOR = 1.84), alcohol intoxication (AOR = 11.31), intersection crashes (AOR = 1.62), and crashes at higher speed limits (AOR = 1.04) increased fatality risk. Helmet nonuse (AOR = 2.31) and alcohol intoxication (AOR = 2.81) increased odds of head injury. Conclusions Michigan’s helmet law repeal resulted in a 24% to 27% helmet use decline among riders in crashes and a 14% increase in head injury. PMID:27854530

Active muscle response using feedback control of a finite element human arm model.

PubMed

Östh, Jonas; Brolin, Karin; Happee, Riender

2012-01-01

Mathematical human body models (HBMs) are important research tools that are used to study the human response in car crash situations. Development of automotive safety systems requires the implementation of active muscle response in HBM, as novel safety systems also interact with vehicle occupants in the pre-crash phase. In this study, active muscle response was implemented using feedback control of a nonlinear muscle model in the right upper extremity of a finite element (FE) HBM. Hill-type line muscle elements were added, and the active and passive properties were assessed. Volunteer tests with low impact loading resulting in elbow flexion motions were performed. Simulations of posture maintenance in a gravity field and the volunteer tests were successfully conducted. It was concluded that feedback control of a nonlinear musculoskeletal model can be used to obtain posture maintenance and human-like reflexive responses in an FE HBM.

The Longitudinal Impact of Cognitive Speed of Processing Training on Driving Mobility

ERIC Educational Resources Information Center

Edwards, Jerri D.; Myers, Charlsie; Ross, Lesley A.; Roenker, Daniel L.; Cissell, Gayla M.; McLaughlin, Alexis M.; Ball, Karlene K.

2009-01-01

Purpose: To examine how cognitive speed of processing training affects driving mobility across a 3-year period among older drivers. Design and Methods: Older drivers with poor Useful Field of View (UFOV) test performance (indicating greater risk for subsequent at-fault crashes and mobility declines) were randomly assigned to either a speed of…

A comparison between a child-size PMHS and the Hybrid III 6 YO in a sled frontal impact.

PubMed

Lopez-Valdes, Francisco J; Forman, Jason; Kent, Richard; Bostrom, Ola; Segui-Gomez, Maria

2009-10-01

As pediatric PMHS data are extremely limited, evidence of kinematic differences between pediatric ATDs and live humans comes from comparison of laboratory data to field crash data. Despite the existence of regulations intended to prevent head injuries, these remain the most common serious injuries sustained by children in crashes. In this study, nine frontal sled tests using a Hybrid III 6YO and three tests performed with a child-size adult PMHS were compared, with focus on the kinematic responses (especially of the head) and the seatbelt forces generated during the impact. Two different restraint systems (a pretensioning, force-limiting seatbelt, and a non pretensioning force-limiting standard belt) and two different impact speeds (29 km/h and 48 km/h) were compared. Data from the PMHS were scaled using the erect sitting height of a 50th percentile 6YO and both scaled and unscaled data are presented. The ATD predicted correctly the peak values of the scaled displacements of the PMHS, but differences in relevant parameters such as torso angle and resultant acceleration at different locations were found between the dummy and the PMHS. The ATD's stiffer thoracic spine is hypothesized as a major cause of these differences.

Investigating the influence on safety of retrofitting Italian motorways with barriers meeting a new EU standard.

PubMed

Cafiso, Salvatore; D'Agostino, Carmelo; Persaud, Bhagwant

2017-04-03

A new European Union (EU) regulation for safety barriers, which is based on performance, has encouraged road agencies to perform an upgrade of old barriers, with the expectation that there will be safety benefits at the retrofitted sites. The new class of barriers was designed and installed in compliance with the 1998 (European Norm) EN 1317 standards for road restraint systems, which lays down common requirements for the testing and certification of road restraint systems in all countries of the European Committee for Standardization (CEN). Both the older and new barriers are made of steel and are installed in such a way as to avoid vehicle intrusion, but the older ones are thought to be only effective at low speeds and large angles of impact. The new standard seeks to remedy this by providing better protection at higher speeds. This article seeks to quantify the effect on the frequency of fatal and injury crashes of retrofitting motorways with barriers meeting the new standards. The estimation of the crash modification was carried out by performing an empirical Bayes before-after analysis based on data from the A18 Messina-Catania motorway in Italy. The methodology has the great advantage to account for the regression to the mean effects. Besides, to account for time trend effects and dispersion of crash data, a modified calibration methodology of safety performance was used. This study, based on data collected on 76 km of motorway in the period 2000-2012, derived Crash Modification Factor point estimates that indicate reductions of 72% for run-off-road fatal and injury crashes and 38% in total fatal and injury crashes that could be expected by upgrading an old safety barrier by complying with new EU 1317 standards. The estimated benefit-cost ratio of 5.57 for total crashes indicates that the treatment is cost effective. The magnitude of this benefit indicates that the retrofits are cost-effective even for total crashes and should continue in any European country inasmuch as the estimated Crash Modification Factors are based on treatment sites that are reasonably representative of all European motorways.

Impact of State Ignition Interlock Laws on Alcohol-Involved Crash Deaths in the United States

PubMed Central

Wiebe, Douglas J.

2016-01-01

Objectives. To investigate the impact on alcohol-involved crash deaths of universal ignition interlock requirements, which aim to prevent people convicted of driving under the influence of alcohol from driving while intoxicated. Methods. We used data from the National Highway Traffic Safety Administration for 1999 to 2013. From 2004 to 2013, 18 states made interlocks mandatory for all drunk-driving convictions. We compared alcohol-involved crash deaths between 18 states with and 32 states without universal interlock requirements, accounting for state and year effects, and for clustering within states. Results. Policy impact was apparent 3 years after implementation. The adjusted rate of alcohol-involved crash deaths was 4.7 (95% confidence interval [CI] = 4.0, 5.4) per 100 000 in states with the universal interlock requirement, compared with 5.5 (95% CI = 5.48, 5.53) in states without, an absolute reduction of 0.8 (95% CI = 0.1, 1.5) deaths per 100 000 per year. Conclusions. Requiring ignition interlocks for all drunk-driving convictions was associated with 15% fewer alcohol-involved crash deaths, compared with states with less-stringent requirements. Interlocks are a life-saving technology that merit wider use. PMID:26985604

Crashworthiness Design of the Shear Bolts for Light Collision Safety Devices

NASA Astrophysics Data System (ADS)

Kim, Jin Sung; Huh, Hoon; Kwon, Tae Soo

This paper introduces the jig set for the crash test and the crash test results of shear bolts which are designed to fail at train crash conditions. The tension and shear bolts are attached to Light Collision Safety Devices(LCSD) as a mechanical fuse when tension and shear bolts reach their failure load designed. The kinetic energy due to the crash is absorbed by the secondary energy absorbing device after LCSD are detached from the main body by the fracture of shear bolts. A single shear bolt was designed to fail at the load of 250 kN. The jig set designed to convert a compressive loading to a shear loading was installed to the high speed crash tester for dynamic shear tests. Two strain gauges were attached at the parallel section of the jig set to measure the load responses acting on the shear bolts. Crash tests were performed with a carrier whose mass was 250 kg and the initial speed of the carrier was 9 m/sec. From the quasi-static and dynamic experiments as well as the numerical analysis, the capacity of the shear bolts were accurately predicted for the crashworthiness design.

The Shock and Vibration Digest. Volume 15, Number 12

DTIC Science & Technology

1983-12-01

dletuning pendulums were claimed to be successful in limited tests [1-4, 12, 13,20, 22-24]. Pohlman and Landers [19] discussed the uniform and nonuniform ...figs. 24 refs 56 Key Words: Impact tests, Columns, Crash research lair - 83-2507 craft) Tramaoni Time-Reqapome Anady.. of 34Depeeiof- Freedom...series with the stiffness of the 83-2517 engine pedestal. The effects of cavitation on performance are Experience with Nonuniform Damping in the Seinic

Trends in Arkansas motorcycle trauma after helmet law repeal.

PubMed

Bledsoe, Gregory H; Li, Guohua

2005-04-01

This study aimed to assess the impact of the 1997 Arkansas helmet law repeal on motorcycle registrations, crash and fatality risks, and alcohol involvement in motorcycle crashes. Annual motorcycle registration data for the years 1990 through 2001 were obtained from the Arkansas Department of Finance and Administration. These motorcycle registration data were complemented by the motorcycle crash data from the Arkansas State Police Highway Safety Office and motorcycle fatality data for the state of Arkansas from the Fatality Analysis Reporting System. The impact of the repeal on crash rates, helmet usage, and alcohol involvement was assessed through comparisons of data from before (1993 to 1996) and after (1998 to 2001) the repeal. After the repeal, an increase in motorcycle registrations correlated with a marked rise in the total number of crashes and fatalities; however, fatalities per crash remained virtually the same. The proportion of motorcycle fatalities that were not wearing a helmet increased from 47.0% (47/100) before the repeal to 78.2% (104/133) after the repeal (P = 0.001). The overall percentage of fatal motorcycle crashes involving alcohol use remained unchanged after the repeal (37.6% [29/77] to 38.5% [40/104], P = 0.91), but the percentage of fatal crashes involving drinking nonhelmeted drivers increased from 14.2% (11/77) to 33.6% (35/104) (P = 0.003). Inebriated motorcyclists killed in crashes were overwhelmingly non-helmeted (87.5%, 35/40) after the repeal, up from 37.9% (11/29) before the repeal (P < 0.001). These findings suggest that the repeal of the mandatory helmet law in Arkansas has had a significant adverse effect on road safety.

Occupant injury in rollover crashes - Contribution of planar impacts with objects and other vehicles.

PubMed

Ivarsson, Johan; Poplin, Gerald; McMurry, Tim; Crandall, Jeff; Kerrigan, Jason

2015-12-01

Planar impacts with objects and other vehicles may increase the risk and severity of injury in rollover crashes. The current study compares the frequency of injury measures (MAIS 2+, 3+, and 4+; fatal; AIS 2+ head and cervical spine; and AIS 3+ head and thorax) as well as vehicle type distribution (passenger car, SUV, van, and light truck), crash kinematics, and occupant demographics between single vehicle single event rollovers (SV Pure) and multiple event rollovers to determine which types of multiple event rollovers can be pooled with SV Pure to study rollover induced occupant injury. Four different types of multiple event rollovers were defined: single and multi-vehicle crashes for which the rollover is the most severe event (SV Prim and MV Prim) and single and multi-vehicle crashes for which the rollover is not the most severe event (SV Non-Prim and MV Non-Prim). Information from real world crashes was obtained from the National Automotive Sampling System - Crashworthiness Data System (NASS-CDS) for the period from 1995 through 2011. Belted, contained or partially ejected, adult occupants in vehicles that completed 1-16 lateral quarter turns were assigned to one of the five rollover categories. The results showed that the frequency of injury in non-primary rollovers (SV Non-Prim and MV Non-Prim) involving no more than one roof inversion is substantially greater than in SV Pure, but that this disparity diminishes for crashes involving multiple inversions. It can further be concluded that for a given number of roof inversions, the distribution of injuries and crash characteristics in SV Pure and SV Prim crashes are sufficiently similar for these categories to be considered collectively for purposes of understanding etiologies and developing strategies for prevention. Copyright © 2015 Elsevier Ltd. All rights reserved.

Injury Risk Functions in Frontal Impacts Using Data from Crash Pulse Recorders

PubMed Central

Stigson, Helena; Kullgren, Anders; Rosén, Erik

2012-01-01

Knowledge of how crash severity influences injury risk in car crashes is essential in order to create a safe road transport system. Analyses of real-world crashes increase the ability to obtain such knowledge. The aim of this study was to present injury risk functions based on real-world frontal crashes where crash severity was measured with on-board crash pulse recorders. Results from 489 frontal car crashes (26 models of four car makes) with recorded acceleration-time history were analysed. Injury risk functions for restrained front seat occupants were generated for maximum AIS value of two or greater (MAIS2+) using multiple logistic regression. Analytical as well as empirical injury risk was plotted for several crash severity parameters; change of velocity, mean acceleration and peak acceleration. In addition to crash severity, the influence of occupant age and gender was investigated. A strong dependence between injury risk and crash severity was found. The risk curves reflect that small changes in crash severity may have a considerable influence on the risk of injury. Mean acceleration, followed by change of velocity, was found to be the single variable that best explained the risk of being injured (MAIS2+) in a crash. Furthermore, all three crash severity parameters were found to predict injury better than age and gender. However, age was an important factor. The very best model describing MAIS2+ injury risk included delta V supplemented by an interaction term of peak acceleration and age. PMID:23169136

NASA experiments onboard the controlled impact demonstration

NASA Technical Reports Server (NTRS)

Hayduk, R. J.; Alfaro-Bou, E.; Fasanella, E. L.

1985-01-01

The structural crashworthiness tests conducted by NASA on the December 1, 1984 controlled impact demonstration are discussed. The components and locations of the data acquisition and photographic systems developed by NASA to evaluate impact loads throughout the aircraft structure and the transmission of loads into the dummies are described. The effectiveness of the NASA designed absorbing seats and the vertical, longitudinal, and transverse impact loads are measured. Data that is extremely applicable to crash dynamics structural research was obtained by the data acquisition system and very low load levels were measured for the NASA energy absorbing seats.

Locomotive to Automobile Baseline Crash Tests

DOT National Transportation Integrated Search

1975-08-01

Four Locomotive to Automobile Crash tests were performed by the Dynamic Science Division of Ultrasystems at DOT's High Speed Ground Test Center under contract to the Transportation Systems Center, which is conducting the work for the Federal Railroad...

The new car assessment program: does it predict the relative safety of vehicles in actual crashes?

PubMed

Nirula, Ram; Mock, Charles N; Nathens, Avery B; Grossman, David C

2004-10-01

Federal motor vehicle safety standards are based on crash test dummy analyses that estimate the relative risk of traumatic brain injury (TBI) and severe thoracic injury (STI) by quantifying head (Head Injury Criterion [HIC]) and chest (Chest Gravity Score [CGS]) acceleration. The New Car Assessment Program (NCAP) combines these probabilities to yield the vehicle's five-star rating. The validity of the NCAP system as it relates to an actual motor vehicle crash (MVC) remains undetermined. We therefore sought to determine whether HIC and CGS accurately predict TBI and STI in actual crashes, and compared the NCAP five-star rating system to the rates of TBI and/or STI in actual MVCs. We analyzed frontal crashes with restrained drivers from the 1994 to 1998 National Automotive Sampling System. The relationship of HIC and CGS to the probabilities of TBI and STI derived from crash tests were respectively compared with the HIC-TBI and CGS-STI risk relationships observed in actual crashes while controlling for covariates. Receiver operating characteristic curves determined the sensitivity and specificity of HIC and CGS as predictors of TBI and STI, respectively. Estimates of the likelihood of TBI and/or STI (in actual MVCs) were compared with the expected probabilities of TBI and STI (determined by crash test analysis), as they relate to NCAP ratings. The crash tests overestimate TBI likelihood at HIC scores >800 and underestimate it at scores <500. STI likelihood is overestimated when CGS exceeds 40 g. Receiver operating characteristic curves demonstrated poor sensitivity and specificity of HIC and CGS in predicting injury. The actual MVC injury probability estimates did not vary between vehicles of different NCAP rating. HIC and CGS are poor predictors of TBI and STI in actual MVCs. The NCAP five-star rating system is unable to differentiate vehicles of varying crashworthiness in actual MVCs. More sensitive parameters need to be developed and incorporated into vehicle crash safety testing to provide consumers and automotive manufacturers with useful tools with which to measure vehicle safety.

NASA technical advances in aircraft occupant safety. [clear air turbulence detectors, fire resistant materials, and crashworthiness

NASA Technical Reports Server (NTRS)

Enders, J. H.

1978-01-01

NASA's aviation safety technology program examines specific safety problems associated with atmospheric hazards, crash-fire survival, control of aircraft on runways, human factors, terminal area operations hazards, and accident factors simulation. While aircraft occupants are ultimately affected by any of these hazards, their well-being is immediately impacted by three specific events: unexpected turbulence encounters, fire and its effects, and crash impact. NASA research in the application of laser technology to the problem of clear air turbulence detection, the development of fire resistant materials for aircraft construction, and to the improvement of seats and restraint systems to reduce crash injuries are reviewed.

Driver injury severity outcome analysis in rural interstate highway crashes: a two-level Bayesian logistic regression interpretation.

PubMed

Chen, Cong; Zhang, Guohui; Liu, Xiaoyue Cathy; Ci, Yusheng; Huang, Helai; Ma, Jianming; Chen, Yanyan; Guan, Hongzhi

2016-12-01

There is a high potential of severe injury outcomes in traffic crashes on rural interstate highways due to the significant amount of high speed traffic on these corridors. Hierarchical Bayesian models are capable of incorporating between-crash variance and within-crash correlations into traffic crash data analysis and are increasingly utilized in traffic crash severity analysis. This paper applies a hierarchical Bayesian logistic model to examine the significant factors at crash and vehicle/driver levels and their heterogeneous impacts on driver injury severity in rural interstate highway crashes. Analysis results indicate that the majority of the total variance is induced by the between-crash variance, showing the appropriateness of the utilized hierarchical modeling approach. Three crash-level variables and six vehicle/driver-level variables are found significant in predicting driver injury severities: road curve, maximum vehicle damage in a crash, number of vehicles in a crash, wet road surface, vehicle type, driver age, driver gender, driver seatbelt use and driver alcohol or drug involvement. Among these variables, road curve, functional and disabled vehicle damage in crash, single-vehicle crashes, female drivers, senior drivers, motorcycles and driver alcohol or drug involvement tend to increase the odds of drivers being incapably injured or killed in rural interstate crashes, while wet road surface, male drivers and driver seatbelt use are more likely to decrease the probability of severe driver injuries. The developed methodology and estimation results provide insightful understanding of the internal mechanism of rural interstate crashes and beneficial references for developing effective countermeasures for rural interstate crash prevention. Copyright © 2016 Elsevier Ltd. All rights reserved.

Reducing the environmental impact of trials: a comparison of the carbon footprint of the CRASH-1 and CRASH-2 clinical trials.

PubMed

Subaiya, Saleena; Hogg, Euan; Roberts, Ian

2011-02-03

All sectors of the economy, including the health research sector, must reduce their carbon emissions. The UK National Institute for Health Research has recently prepared guidelines on how to minimize the carbon footprint of research. We compare the carbon emissions from two international clinical trials in order to identify where emissions reductions can be made. We conducted a carbon audit of two clinical trials (the CRASH-1 and CRASH-2 trials), quantifying the carbon dioxide emissions produced over a one-year audit period. Carbon emissions arising from the coordination centre, freight delivery, trial-related travel and commuting were calculated and compared. The total emissions in carbon dioxide equivalents during the one-year audit period were 181.3 tonnes for CRASH-1 and 108.2 tonnes for CRASH-2. In total, CRASH-1 emitted 924.6 tonnes of carbon dioxide equivalents compared with 508.5 tonnes for CRASH-2. The CRASH-1 trial recruited 10,008 patients over 5.1 years, corresponding to 92 kg of carbon dioxide per randomized patient. The CRASH-2 trial recruited 20,211 patients over 4.7 years, corresponding to 25 kg of carbon dioxide per randomized patient. The largest contributor to emissions in CRASH-1 was freight delivery of trial materials (86.0 tonnes, 48% of total emissions), whereas the largest contributor in CRASH-2 was energy use by the trial coordination centre (54.6 tonnes, 30% of total emissions). Faster patient recruitment in the CRASH-2 trial largely accounted for its greatly increased carbon efficiency in terms of emissions per randomized patient. Lighter trial materials and web-based data entry also contributed to the overall lower carbon emissions in CRASH-2 as compared to CRASH-1. CRASH-1: ISRCTN74459797CRASH-2: ISRCTN86750102.

Coupling of a finite element human head model with a lumped parameter Hybrid III dummy model: preliminary results.

PubMed

Ruan, J S; Prasad, P

1995-08-01

A skull-brain finite element model of the human head has been coupled with a multilink rigid body model of the Hybrid III dummy. The experimental coupled model is intended to represent anatomically a 50th percentile human to the extent the dummy and the skull-brain model represent a human. It has been verified by simulating several human cadaver head impact tests as well as dummy head 'impacts" during barrier crashes in an automotive environment. Skull-isostress and brain-isostrain response curves were established based on model calibration of experimental human cadaver tolerance data. The skull-isostress response curve agrees with the JARI Human Head Impact Tolerance Curve for skull fracture. The brain-isostrain response curve predicts a higher G level for concussion than does the JARI concussion curve and the Wayne State Tolerance Curve at the longer time duration range. Barrier crash simulations consist of belted dummies impacting an airbag, a hard and soft steering wheel hub, and no head contact with vehicle interior components. Head impact force, intracranial pressures and strains, skull stress, and head center-of-gravity acceleration were investigated as injury parameters. Head injury criterion (HIC) was also calculated along with these parameters. Preliminary results of the model simulations in those impact conditions are discussed.

Finite Element Modelling Full Vehicle Side Impact with Ultrahigh Strength Hot Stamped Steels

NASA Astrophysics Data System (ADS)

Taylor, T.; Fourlaris, G.; Cafolla, J.

2016-10-01

"Hot stamped boron steel" 22MnB5 has been imperative in meeting the automotive industry's demand for materials exhibiting higher tensile strength in the final component. In this paper, the crash performance of three experimental grades developed for automotive hot stamping technologies, exhibiting wider tensile property ranges than 22MnB5, was validated by finite element modelling full vehicle side impact with the experimental material data applied to the B-pillar reinforcement. The superior anti-intrusive crash performance of grade 38MnB5 was demonstrated, with 11 mm less intrusion of the B-pillar reinforcement compared to 22MnB5. Moreover, the superior "impact-energy absorptive" crash performance of grade 15MnCr5 was demonstrated, with 0.15 kJ greater impact-energy absorption by the B-pillar reinforcement compared to 22MnB5.

Differences in state drug testing and reporting by driver type in U.S. fatal traffic crashes.

PubMed

Slater, Megan E; Castle, I-Jen P; Logan, Barry K; Hingson, Ralph W

2016-07-01

Driving under the influence of drugs, including marijuana, has become more prevalent in recent years despite local, state, and federal efforts to prevent such increases. The Fatality Analysis Reporting System (FARS) is the primary source of drugged driving data for fatal crashes in the United States but lacks the completeness required to calculate unbiased estimates of drug use among drivers involved in fatal crashes. This article uses the 2013 FARS dataset to present differences in state drug testing rates by driver type, driver fault type, and state-level factors; discusses limitations related to analysis and interpretation of drugged driving data; and offers suggestions for improvements that may enable appropriate use of FARS drug testing data in the future. Results showed that state drug testing rates were highest among drivers who died at the scene of the crash (median=70.8%) and drivers who died and were at fault in the crash (median=64.4%). The lowest testing rates were seen among surviving drivers who were not transported to a hospital (median=14.0%) and surviving drivers who were not at fault in the crash (median=10.0%). Drug testing rates differed by state blood alcohol content (BAC) testing rate across all driver types and driver fault types, and in general, states that tested a higher percentage of drivers for BAC had higher drug testing rates. Testing rates might be increased through standardization and mandatory testing policies. FARS data users should continue to be cautious about the limitations of using currently available data to quantify drugged driving. More efforts are needed to improve drug testing and reporting practices, and more research is warranted to establish drug concentration levels at which driving skills become impaired. Copyright © 2016 Elsevier Ltd. All rights reserved.

Instrumentation Methodology for Automobile Crash Testing

DOT National Transportation Integrated Search

1974-08-01

Principal characteristics of existing data acquisition practices and instrumentation methodologies have been reviewed to identify differences which are responsible for difficulties in comparing and interpreting structural crash test data. Recommendat...

Creating pedestrian crash scenarios in a driving simulator environment.

PubMed

Chrysler, Susan T; Ahmad, Omar; Schwarz, Chris W

2015-01-01

In 2012 in the United States, pedestrian injuries accounted for 3.3% of all traffic injuries but, disproportionately, pedestrian fatalities accounted for roughly 14% of traffic-related deaths (NHTSA 2014 ). In many other countries, pedestrians make up more than 50% of those injured and killed in crashes. This research project examined driver response to crash-imminent situations involving pedestrians in a high-fidelity, full-motion driving simulator. This article presents a scenario development method and discusses experimental design and control issues in conducting pedestrian crash research in a simulation environment. Driving simulators offer a safe environment in which to test driver response and offer the advantage of having virtual pedestrian models that move realistically, unlike test track studies, which by nature must use pedestrian dummies on some moving track. An analysis of pedestrian crash trajectories, speeds, roadside features, and pedestrian behavior was used to create 18 unique crash scenarios representative of the most frequent and most costly crash types. For the study reported here, we only considered scenarios where the car is traveling straight because these represent the majority of fatalities. We manipulated driver expectation of a pedestrian both by presenting intersection and mid-block crossing as well as by using features in the scene to direct the driver's visual attention toward or away from the crossing pedestrian. Three visual environments for the scenarios were used to provide a variety of roadside environments and speed: a 20-30 mph residential area, a 55 mph rural undivided highway, and a 40 mph urban area. Many variables of crash situations were considered in selecting and developing the scenarios, including vehicle and pedestrian movements; roadway and roadside features; environmental conditions; and characteristics of the pedestrian, driver, and vehicle. The driving simulator scenarios were subjected to iterative testing to adjust time to arrival triggers for the pedestrian actions. This article discusses the rationale behind creating the simulator scenarios and some of the procedural considerations for conducting this type of research. Crash analyses can be used to construct test scenarios for driver behavior evaluations using driving simulators. By considering trajectories, roadway, and environmental conditions of real-world crashes, representative virtual scenarios can serve as safe test beds for advanced driver assistance systems. The results of such research can be used to inform pedestrian crash avoidance/mitigation systems by identifying driver error, driver response time, and driver response choice (i.e., steering vs. braking).

A revolution in preventing fatal craniovertebral junction injuries: lessons learned from the Head and Neck Support device in professional auto racing.

PubMed

Kaul, Anand; Abbas, Ahmed; Smith, Gabriel; Manjila, Sunil; Pace, Jonathan; Steinmetz, Michael

2016-12-01

Fatal craniovertebral junction (CVJ) injuries were the most common cause of death in high-speed motor sports prior to 2001. Following the death of a mutual friend and race car driver, Patrick Jacquemart (1946-1981), biomechanical engineer Dr. Robert Hubbard, along with race car driver and brother-in-law Jim Downing, developed the concept for the Head and Neck Support (HANS) device to prevent flexion-distraction injuries during high-velocity impact. Biomechanical testing showed that neck shear and loading forces experienced during collisions were 3 times the required amount for a catastrophic injury. Crash sled testing with and without the HANS device elucidated reductions in neck tension, neck compression, head acceleration, and chest acceleration experienced by dummies during high-energy crashes. Simultaneously, motor sports accidents such as Dale Earnhardt Sr.'s fatal crash in 2001 galvanized public opinion in favor of serious safety reform. Analysis of Earnhardt's accident demonstrated that his car's velocity parallel to the barrier was more than 150 miles per hour (mph), with deceleration upon impact of roughly 43 mph in a total of 0.08 seconds. After careful review, several major racing series such as the National Association for Stock Car Auto Racing (NASCAR) and Championship Auto Racing Team (CART) made major changes to ensure the safety of drivers at the turn of the 21st century. Since the rule requiring the HANS device in professional auto racing series was put in place, there has not been a single reported case of a fatal CVJ injury.

Assessment of crash fire hazard of LH sub 2 fueled aircraft

NASA Technical Reports Server (NTRS)

Brewer, G. D.; Wittlin, G.; Versaw, E. F.; Parmley, R.; Cima, R.; Walther, E. G.

1981-01-01

The relative safety of passengers in LH2 - fueled aircraft, as well as the safety of people in areas surrounding a crash scene, has been evaluated in an analytical study. Four representative circumstances were postulated involving a transport aircraft in which varying degrees of severity of damage were sustained. Potential hazard to the passengers and to the surroundings posed by the spilled fuel was evaluated for each circumstance. Corresponding aircraft fueled with liquid methane, Jet A, and JP-4 were also studied in order to make comparisons of the relative safety. The four scenarios which were used to provide a basis for the evaluation included: (1) a small fuel leak internal to the aircraft, (2) a survivable crash in which a significant quantity of fuel is spilled in a radial pattern as a result of impact with a stationary object while taxiing at fairly low speed, (3) a survivable crash in which a significant quantity of fuel is spilled in an axial pattern as a result of impact during landing, and (4) a non-survivable crash in which a massive fuel spill occurs instantaneously.

Emergency evacuation tests of a crashed L-1649.

DOT National Transportation Integrated Search

1966-08-01

Four basic evacuation tests were performed on a crashed L-1649 in Phoenix, Arizona, to document problem areas, passenger reaction, emergency lighting, slope of flooring and other items affecting passenger egress. Two day and two night tests were run ...

Exciting New Take on a Classic: Crash Testing Activity Puts the Egg in the Driver's Seat

ERIC Educational Resources Information Center

Board, Keith

2011-01-01

An excellent common activity in technology and engineering classes involves dropping an egg from a significant height in a protective device designed and built by students. This article describes how the author uses the classic "egg drop" as an inspiration to have students modify a small crash test vehicle that speeds down a track and crashes into…

Exciting New Take on a Classic: Crash Test Activity Puts the Egg in the Driver's Seat

ERIC Educational Resources Information Center

Board, Keith

2011-01-01

An excellent common activity in technology and engineering classes involves dropping an egg from a significant height in a protective device designed and built by students. This article describes how the author uses the classic "egg drop" as an inspiration to have students modify a small crash test vehicle that speeds down a track and crashes into…

Dimensions of motor vehicle crash risk

DOT National Transportation Integrated Search

1999-05-01

A valid assessment of motor vehicle crash risks and the potential impact of safety interventions requires a precise understanding of the types of vehicles likely to be equipped and otherwise affected, the most relevant referent to the intervention (e...

Air quality impacts of intercity freight. Volume 1 : guidebook

DOT National Transportation Integrated Search

2000-01-01

Driver error remains the leading cause of highway crashes. Through the Intelligent Vehicle Initiative (IVI), the Department of Transportation hopes to reduce crashes by helping drivers avoid hazardous mistakes. IVI aims to accelerate the development ...

Comparison of Hard Surface and Soft Soil Impact Performance of a Crashworthy Composite Fuselage Concept

NASA Technical Reports Server (NTRS)

Sareen, Ashish K.; Sparks, Chad; Mullins, B. R., Jr.; Fasanella, Edwin; Jackson, Karen

2002-01-01

A comparison of the soft soil and hard surface impact performance of a crashworthy composite fuselage concept has been performed. Specifically, comparisons of the peak acceleration values, pulse duration, and onset rate at specific locations on the fuselage were evaluated. In a prior research program, the composite fuselage section was impacted at 25 feet per second onto concrete at the Impact Dynamics Research Facility (IDRF) at NASA Langley Research Center. A soft soil test was conducted at the same impact velocity as a part of the NRTC/RITA Crashworthy and Energy Absorbing Structures project. In addition to comparisons of soft soil and hard surface test results, an MSC. Dytran dynamic finite element model was developed to evaluate the test analysis correlation. In addition, modeling parameters and techniques affecting test analysis correlation are discussed. Once correlated, the analytical methodology will be used in follow-on work to evaluate the specific energy absorption of various subfloor concepts for improved crash protection during hard surface and soft soil impacts.

Prescription medicines and the risk of road traffic crashes: a French registry-based study.

PubMed

Orriols, Ludivine; Delorme, Bernard; Gadegbeku, Blandine; Tricotel, Aurore; Contrand, Benjamin; Laumon, Bernard; Salmi, Louis-Rachid; Lagarde, Emmanuel

2010-11-16

In recent decades, increased attention has been focused on the impact of disabilities and medicinal drug use on road safety. The aim of our study was to investigate the association between prescription medicines and the risk of road traffic crashes, and estimate the attributable fraction. We extracted and matched data from three French nationwide databases: the national health care insurance database, police reports, and the national police database of injurious crashes. Drivers identified by their national health care number involved in an injurious crash in France, between July 2005 and May 2008, were included in the study. Medicines were grouped according to the four risk levels of the French classification system (from 0 [no risk] to 3 [high risk]). We included 72,685 drivers involved in injurious crashes. Users of level 2 (odds ratio [OR]  = 1.31 [1.24-1.40]) and level 3 (OR  = 1.25 [1.12-1.40]) prescription medicines were at higher risk of being responsible for a crash. The association remained after adjustment for the presence of a long-term chronic disease. The fraction of road traffic crashes attributable to levels 2 and 3 medications was 3.3% [2.7%-3.9%]. A within-person case-crossover analysis showed that drivers were more likely to be exposed to level 3 medications on the crash day than on a control day, 30 days earlier (OR  = 1.15 [1.05-1.27]). The use of prescription medicines is associated with a substantial number of road traffic crashes in France. In light of the results, warning messages appear to be relevant for level 2 and 3 medications and questionable for level 1 medications. A follow-up study is needed to evaluate the impact of the warning labeling system on road traffic crash prevention.

Prescription Medicines and the Risk of Road Traffic Crashes: A French Registry-Based Study

PubMed Central

Orriols, Ludivine; Delorme, Bernard; Gadegbeku, Blandine; Tricotel, Aurore; Contrand, Benjamin; Laumon, Bernard; Salmi, Louis-Rachid; Lagarde, Emmanuel

2010-01-01

Background In recent decades, increased attention has been focused on the impact of disabilities and medicinal drug use on road safety. The aim of our study was to investigate the association between prescription medicines and the risk of road traffic crashes, and estimate the attributable fraction. Methods and Findings We extracted and matched data from three French nationwide databases: the national health care insurance database, police reports, and the national police database of injurious crashes. Drivers identified by their national health care number involved in an injurious crash in France, between July 2005 and May 2008, were included in the study. Medicines were grouped according to the four risk levels of the French classification system (from 0 [no risk] to 3 [high risk]). We included 72,685 drivers involved in injurious crashes. Users of level 2 (odds ratio [OR]  = 1.31 [1.24–1.40]) and level 3 (OR  = 1.25 [1.12–1.40]) prescription medicines were at higher risk of being responsible for a crash. The association remained after adjustment for the presence of a long-term chronic disease. The fraction of road traffic crashes attributable to levels 2 and 3 medications was 3.3% [2.7%–3.9%]. A within-person case-crossover analysis showed that drivers were more likely to be exposed to level 3 medications on the crash day than on a control day, 30 days earlier (OR  = 1.15 [1.05–1.27]). Conclusion The use of prescription medicines is associated with a substantial number of road traffic crashes in France. In light of the results, warning messages appear to be relevant for level 2 and 3 medications and questionable for level 1 medications. A follow-up study is needed to evaluate the impact of the warning labeling system on road traffic crash prevention. Please see later in the article for the Editors' Summary PMID:21125020

Use of LS-DYNA(Registered TradeMark) to Assess the Energy Absorption Performance of a Shell-Based Kevlar(TradeMark)/Epoxy Composite Honeycomb

NASA Technical Reports Server (NTRS)

Polanco, Michael

2010-01-01

The forward and vertical impact stability of a composite honeycomb Deployable Energy Absorber (DEA) was evaluated during a full-scale crash test of an MD-500 helicopter at NASA Langley?s Landing and Impact Research Facility. The lower skin of the helicopter was retrofitted with DEA components to protect the airframe subfloor upon impact and to mitigate loads transmitted to Anthropomorphic Test Device (ATD) occupants. To facilitate the design of the DEA for this test, an analytical study was conducted using LS-DYNA(Registered TradeMark) to evaluate the performance of a shell-based DEA incorporating different angular cell orientations as well as simultaneous vertical and forward impact conditions. By conducting this study, guidance was provided in obtaining an optimum design for the DEA that would dissipate the kinetic energy of the airframe while maintaining forward and vertical impact stability.

A comparison of safety benefits of pedestrian countdown signals with and without pushbuttons in Michigan.

PubMed

Boateng, Richard Atta; Kwigizile, Valerian; Oh, Jun-Seok

2018-04-11

This study evaluated the safety impacts of PCSs with and without pushbuttons based on pedestrian crashes and pedestrian injuries in Michigan. This study used ten years of intersection data: five years before PCSs were installed and five years after they were installed, along with a comparison group, to evaluate the crash impacts of PCSs: at 107 intersections the PCS had a pushbutton and at 96 it did not. At these intersections, and at their comparison sites (where no PCS was installed), crash data (from 2004-2016) were examined, along with traffic and geometric characteristics, population, education and poverty levels data. Intersections where PCSs with pushbuttons have been installed showed a 29 percent reduction in total pedestrian crashes and a 30 percent reduction in fatal/injury pedestrian crashes. Further, when considering only pedestrians age 65 and below, these respective reductions are 33 and 35 percent. Intersections with PCSs but without pushbuttons did not show any significant change in any type of pedestrian crash. Although the Manual of Uniform Traffic Control Devices (FHWA, 2009) requires the use of PCSs at new traffic signal installations, this study suggests a safety benefit of installing PCSs with pushbutton at signals where a PCS without a pushbutton is present.

Investigation of Roadway Geometric and Traffic Flow Factors for Vehicle Crashes Using Spatiotemporal Interaction

NASA Astrophysics Data System (ADS)

Gill, G.; Sakrani, T.; Cheng, W.; Zhou, J.

2017-09-01

Traffic safety is a major concern in the transportation industry due to immense monetary and emotional burden caused by crashes of various severity levels, especially the injury and fatality ones. To reduce such crashes on all public roads, the safety management processes are commonly implemented which include network screening, problem diagnosis, countermeasure identification, and project prioritization. The selection of countermeasures for potential mitigation of crashes is governed by the influential factors which impact roadway crashes. Crash prediction model is the tool widely adopted by safety practitioners or researchers to link various influential factors to crash occurrences. Many different approaches have been used in the past studies to develop better fitting models which also exhibit prediction accuracy. In this study, a crash prediction model is developed to investigate the vehicular crashes occurring at roadway segments. The spatial and temporal nature of crash data is exploited to form a spatiotemporal model which accounts for the different types of heterogeneities among crash data and geometric or traffic flow variables. This study utilizes the Poisson lognormal model with random effects, which can accommodate the yearly variations in explanatory variables and the spatial correlations among segments. The dependency of different factors linked with roadway geometric, traffic flow, and road surface type on vehicular crashes occurring at segments was established as the width of lanes, posted speed limit, nature of pavement, and AADT were found to be correlated with vehicle crashes.

Crash test and evaluation of 3-ft mounting height sign support system.

DOT National Transportation Integrated Search

2016-07-01

The Texas Department of Transportation (TxDOT) and other transportation agencies continue to : research potential countermeasure for mitigating wrong-way crashes. Because many drivers involved in : wrong-way crashes are impaired, some highway safety ...

Validation of the principles of injury risk zones for motorcycle protective clothing.

PubMed

de Rome, Liz; Meredith, Lauren; Ivers, Rebecca; Brown, Julie

2014-09-01

The distributions of motorcycle crash impacts and injuries were compared to the four impact risk zones and protective performance specified in the European Standard for motorcycle clothing (EN 13595). Crashed motorcyclists' (n=117) injuries and clothing damage were categorized by body area into the four risk zones. Three levels of protection were defined: protective clothing with impact protection, protective clothing only and non-protective clothing. The distribution of impact/injury sites corresponded to the predictions of EN 13595, with the proportion of all injuries decreasing from 43.9% in Zone 1, to 18.0%, 16.7%, and 11.5% in Zones 2 to 4, respectively. Protective clothing modified the distribution of injuries with substantially more injuries (OR=2.69, 95% CL: 20.1-3.59) at unprotected impact sites. These findings support an appropriate framework for determining performance specifications for the manufacture of motorcycle clothing that will effectively reduce the risk of injury in crashes. Copyright © 2014 Elsevier Ltd. All rights reserved.

MASH TL-4 crash testing and evaluation of the RESTORE barrier.

DOT National Transportation Integrated Search

2015-11-01

Three full-scale vehicle crash tests were conducted according to the MASH Test Level 4 (TL-4) safety performance criteria on a : restorable and reusable energy-absorbing roadside/median barrier, designated the RESTORE barrier. The system utilized for...

Collision safety of a hard-shell low-mass vehicle

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kaeser, R.; Walz, F.H.; Brunner, A.

1994-06-01

Low-mass vehicles and in particular low-mass electric vehicles as produced today in very small quantities are in general not designed for crashworthiness in collisions. Particular problems of compact low-mass cars are: reduced length of the car front, low mass compared to other vehicles, and heavy batteries in the case of an electric car. With the intention of studying design improvements, three frontal crash tests were run last year: the first one with a commercial, lightweight electric car; the second with a reinforced version of the same car; and the last one with a car based on a different structural designmore » with a `hard-shell` car body. Crash tests showed that the latter solution made better use of the small zone available for continuous energy absorption. The paper discusses further the problem of frontal collisions between vehicles of different weight and, in particular, the side collision. A side-collision test was run with the hard-shell vehicle following the ECE lateral-impact test procedure at 50 km/h and led to results for the EuroSIDI-dummy well below current injury tolerance criteria.« less

Collision safety of a hard-shell low-mass vehicle.

PubMed

Kaeser, R; Walz, F H; Brunner, A

1994-06-01

Low-mass vehicles and in particular low-mass electric vehicles as produced today in very small quantities are in general not designed for crashworthiness in collisions. Particular problems of compact low-mass cars are: reduced length of the car front, low mass compared to other vehicles, and heavy batteries in the case of an electric car. With the intention of studying design improvements, three frontal crash tests were run last year: the first one with a commercial, lightweight electric car; the second with a reinforced version of the same car; and the last one with a car based on a different structural design with a "hard-shell" car body. Crash tests showed that the latter solution made better use of the small zone available for continuous energy absorption. The paper discusses further the problem of frontal collisions between vehicles of different weight and, in particular, the side collision. A side-collision test was run with the hard-shell vehicle following the ECE lateral-impact test procedure at 50 km/h and led to results for the EuroSID1-dummy well below current injury tolerance criteria.

Modeling the impact of rescinding Michigan's primary and secondary seat belt laws on death and injury from passenger vehicle crashes.

PubMed

Carter, Patrick M; Flannagan, Carol A C; Bingham, C Raymond; Cunningham, Rebecca M; Rupp, Jonathan D

2014-01-01

Seat belts are the most effective method of decreasing fatal and nonfatal motor vehicle crash injury. Advocacy groups have recently been successful in enacting repeals of mandatory motorcycle helmet laws in several states. In some states, this has prompted renewed efforts aimed at repealing mandatory seat belt laws. To evaluate and quantify the potential impact of rescinding seat belt laws on annual crash-related fatalities, nonfatal injuries, and associated economic costs, using Michigan as a model, to inform the national debate. Proportional injury rates were calculated utilizing police-reported statewide passenger vehicle crash data from 1999 and 2002, where belt use rates approximate estimates associated with repeal of primary and secondary seat belt laws. Proportional rates were applied to the most recent year of crash data (2011) to estimate changes in statewide fatalities and nonfatal injuries. National cost estimates were applied to injury data to calculate associated economic costs. Full repeal of the seat belt law is estimated to result in an additional 163 fatalities, 13,722 nonfatal injuries, and an associated societal cost of $1.6 billion annually. Repeal of the primary seat belt law only is estimated to result in an additional 95 fatalities, 9156 nonfatal injuries, and an associated societal cost of $1.0 billion annually. This analysis suggests that repealing the either the primary or full seat belt law would have a substantial and negative impact on public health, increasing motor vehicle crash related fatality, nonfatal injury, and associated economic costs.

Evaluating impacts of different longitudinal driver assistance systems on reducing multi-vehicle rear-end crashes during small-scale inclement weather.

PubMed

Li, Ye; Xing, Lu; Wang, Wei; Wang, Hao; Dong, Changyin; Liu, Shanwen

2017-10-01

Multi-vehicle rear-end (MVRE) crashes during small-scale inclement (SSI) weather cause high fatality rates on freeways, which cannot be solved by traditional speed limit strategies. This study aimed to reduce MVRE crash risks during SSI weather using different longitudinal driver assistance systems (LDAS). The impact factors on MVRE crashes during SSI weather were firstly analyzed. Then, four LDAS, including Forward collision warning (FCW), Autonomous emergency braking (AEB), Adaptive cruise control (ACC) and Cooperative ACC (CACC), were modeled based on a unified platform, the Intelligent Driver Model (IDM). Simulation experiments were designed and a large number of simulations were then conducted to evaluate safety effects of different LDAS. Results indicate that the FCW and ACC system have poor performance on reducing MVRE crashes during SSI weather. The slight improvement of sight distance of FCW and the limitation of perception-reaction time of ACC lead the failure of avoiding MVRE crashes in most scenarios. The AEB system has the better effect due to automatic perception and reaction, as well as performing the full brake when encountering SSI weather. The CACC system has the best performance because wireless communication provides a larger sight distance and a shorter time delay at the sub-second level. Sensitivity analyses also indicated that the larger number of vehicles and speed changes after encountering SSI weather have negative impacts on safety performances. Results of this study provide useful information for accident prevention during SSI weather. Copyright © 2017 Elsevier Ltd. All rights reserved.

Crash simulation of hybrid structures considering the stress and strain rate dependent material behavior of thermoplastic materials

NASA Astrophysics Data System (ADS)

Hopmann, Ch.; Schöngart, M.; Weber, M.; Klein, J.

2015-05-01

Thermoplastic materials are more and more used as a light weight replacement for metal, especially in the automotive industry. Since these materials do not provide the mechanical properties, which are required to manufacture supporting elements like an auto body or a cross bearer, plastics are combined with metals in so called hybrid structures. Normally, the plastics components are joined to the metal structures using different technologies like welding or screwing. Very often, the hybrid structures are made of flat metal parts, which are stiffened by a reinforcement structure made of thermoplastic materials. The loads on these structures are very often impulsive, for example in the crash situation of an automobile. Due to the large stiffness variation of metal and thermoplastic materials, complex states of stress and very high local strain rates occur in the contact zone under impact conditions. Since the mechanical behavior of thermoplastic materials is highly dependent on these types of load, the crash failure of metal plastic hybrid parts is very complex. The problem is that the normally used strain rate dependent elastic/plastic material models are not capable to simulate the mechanical behavior of thermoplastic materials depended on the state of stress. As part of a research project, a method to simulate the mechanical behavior of hybrid structures under impact conditions is developed at the IKV. For this purpose, a specimen for the measurement of mechanical properties dependet on the state of stress and a method for the strain rate depended characterization of thermoplastic materials were developed. In the second step impact testing is performed. A hybrid structure made from a metal sheet and a reinforcement structure of a Polybutylenterephthalat Polycarbonate blend is tested under impact conditions. The measured stress and strain rate depended material data are used to simulate the mechanical behavior of the hybrid structure under highly dynamic load with impact velocities up to 5 m/s. The mechanical behavior of the plastics structure is simulated using a quadratic yield surface, which takes the state of stress and the strain rate into account. The FE model is made from mid surface elements to reduce the computing time.

Improving incident management response and coordination of resources.

DOT National Transportation Integrated Search

2001-12-01

Highway crashes cause a major impact to the transportation network by critically limiting the operational efficiency of the roadway. Traveler delay is the problem most often associated with highway crashes, but by far the most serious problem is the ...

Analyzing the impact of median treatments on pedestrian/bicyclist safety : research summary.

DOT National Transportation Integrated Search

2017-05-01

Results of the trend analysis showed that : treatment sites (where median treatments : have been installed) experienced lower or : similar crash rates for all crash types after : the treatment, while control sites (no : median treatments) experience ...

Statewide analysis of guardrails, curves and crashes.

DOT National Transportation Integrated Search

2015-01-31

This research project focuses on the interactions between guardrails and curves, and their confounding relationships with crash incidents. As such, the goals of this work is to assess the impacts of the presence of guardrails and the locations of hor...

Crash sequence based risk matrix for motorcycle crashes.

PubMed

Wu, Kun-Feng; Sasidharan, Lekshmi; Thor, Craig P; Chen, Sheng-Yin

2018-04-05

Considerable research has been conducted related to motorcycle and other powered-two-wheeler (PTW) crashes; however, it always has been controversial among practitioners concerning with types of crashes should be first targeted and how to prioritize resources for the implementation of mitigating actions. Therefore, there is a need to identify types of motorcycle crashes that constitute the greatest safety risk to riders - most frequent and most severe crashes. This pilot study seeks exhibit the efficacy of a new approach for prioritizing PTW crash causation sequences as they relate to injury severity to better inform the application of mitigating countermeasures. To accomplish this, the present study constructed a crash sequence-based risk matrix to identify most frequent and most severe motorcycle crashes in an attempt to better connect causes and countermeasures of PTW crashes. Although the frequency of each crash sequence can be computed from crash data, a crash severity model is needed to compare the levels of crash severity among different crash sequences, while controlling for other factors that also have effects on crash severity such drivers' age, use of helmet, etc. The construction of risk matrix based on crash sequences involve two tasks: formulation of crash sequence and the estimation of a mixed-effects (ME) model to adjust the levels of severities for each crash sequence to account for other crash contributing factors that would have an effect on the maximum level of crash severity in a crash. Three data elements from the National Automotive Sampling System - General Estimating System (NASS-GES) data were utilized to form a crash sequence: critical event, crash types, and sequence of events. A mixed-effects model was constructed to model the severity levels for each crash sequence while accounting for the effects of those crash contributing factors on crash severity. A total of 8039 crashes involving 8208 motorcycles occurred during 2011 and 2013 were included in this study, weighted to represent 338,655 motorcyclists involved in traffic crashes in three years (2011-2013)(NHTSA, 2013). The top five most frequent and severe types of crash sequences were identified, accounting for 23 percent of all the motorcycle crashes included in the study, and they are (1) run-off-road crashes on the right, and hitting roadside objects, (2) cross-median crashes, and rollover, (3) left-turn oncoming crashes, and head-on, (4) crossing over (passing through) or turning into opposite direction at intersections, and (5) side-impacted. In addition to crash sequences, several other factors were also identified to have effects on crash severity: use of helmet, presence of horizontal curves, alcohol consumption, road surface condition, roadway functional class, and nighttime condition. Copyright © 2018 Elsevier Ltd. All rights reserved.

An Approach to the Derivation of the Cost of UK Vehicle Crash Injuries

PubMed Central

Morris, Andrew; Welsh, Ruth; Barnes, Jo; Chambers-Smith, Dawn

2006-01-01

An approach to costing of road crash injury has been developed using data from a ‘Willingness-to-pay’ survey mapped to injuries listed in the Abbreviated Injury Scale 1998 Revision. The costs derived have been applied to a database of real-world crash injuries that have been collected as part of the UK Cooperative Crash Injury Study (CCIS). The approach has been developed in order to determine future research priorities in vehicle passive safety. When all injuries in all crash-types are examined, the results highlight the cost of ‘Whiplash’ in the UK. When more serious injuries are considered, specifically those at AIS 2+, the cost of head injuries becomes evident in both frontal and side impacts. PMID:16968643

Prediction of Outcome after Moderate and Severe Traumatic Brain Injury: External Validation of the IMPACT and CRASH Prognostic Models

PubMed Central

Roozenbeek, Bob; Lingsma, Hester F.; Lecky, Fiona E.; Lu, Juan; Weir, James; Butcher, Isabella; McHugh, Gillian S.; Murray, Gordon D.; Perel, Pablo; Maas, Andrew I.R.; Steyerberg, Ewout W.

2012-01-01

Objective The International Mission on Prognosis and Analysis of Clinical Trials (IMPACT) and Corticoid Randomisation After Significant Head injury (CRASH) prognostic models predict outcome after traumatic brain injury (TBI) but have not been compared in large datasets. The objective of this is study is to validate externally and compare the IMPACT and CRASH prognostic models for prediction of outcome after moderate or severe TBI. Design External validation study. Patients We considered 5 new datasets with a total of 9036 patients, comprising three randomized trials and two observational series, containing prospectively collected individual TBI patient data. Measurements Outcomes were mortality and unfavourable outcome, based on the Glasgow Outcome Score (GOS) at six months after injury. To assess performance, we studied the discrimination of the models (by AUCs), and calibration (by comparison of the mean observed to predicted outcomes and calibration slopes). Main Results The highest discrimination was found in the TARN trauma registry (AUCs between 0.83 and 0.87), and the lowest discrimination in the Pharmos trial (AUCs between 0.65 and 0.71). Although differences in predictor effects between development and validation populations were found (calibration slopes varying between 0.58 and 1.53), the differences in discrimination were largely explained by differences in case-mix in the validation studies. Calibration was good, the fraction of observed outcomes generally agreed well with the mean predicted outcome. No meaningful differences were noted in performance between the IMPACT and CRASH models. More complex models discriminated slightly better than simpler variants. Conclusions Since both the IMPACT and the CRASH prognostic models show good generalizability to more recent data, they are valid instruments to quantify prognosis in TBI. PMID:22511138

Case series analysis of hindfoot injuries sustained by drivers in frontal motor vehicle crashes.

PubMed

Ye, Xin; Funk, James; Forbes, Aaron; Hurwitz, Shepard; Shaw, Greg; Crandall, Jeff; Freeth, Rob; Michetti, Chris; Rudd, Rodney; Scarboro, Mark

2015-09-01

Improvements to vehicle frontal crashworthiness have led to reductions in toe pan and instrument panel intrusions as well as leg, foot, and ankle loadings in standardized crash tests. Current field data, however, suggests the proportion of foot and ankle injuries sustained by drivers in frontal crashes has not decreased over the past two decades. To explain the inconsistency between crash tests results and real world lower limb injury prevalence, this study investigated the injury causation scenario for the specific hind-foot injury patterns observed in frontal vehicle crashes. Thirty-four cases with leg, foot, and ankle injuries were selected from the Crash Injury Research and Engineering Network (CIREN) database. Talus fractures were present in 20 cases, representing the most frequent hind-foot skeletal injuries observed among the reviewed cases. While axial compression was the predominant loading mechanism causing 18 injuries, 11 injured ankles involved inversion or eversion motion, and 5 involved dorsiflexion as the injury mechanism. Injured ankles of drivers were more biased towards the right aspect with foot pedals contributing to injuries in 13 of the 34 cases. Combined, the results suggest that despite recent advancement of vehicle performance in crash tests, efforts to reduce axial forces sustained in lower extremity should be prioritized. The analysis of injury mechanisms in this study could aid in crash reconstructions and the development of safety systems for vehicles. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

NASA/FAA general aviation crash dynamics program

NASA Technical Reports Server (NTRS)

Thomson, R. G.; Hayduk, R. J.; Carden, H. D.

1981-01-01

The program involves controlled full scale crash testing, nonlinear structural analyses to predict large deflection elastoplastic response, and load attenuating concepts for use in improved seat and subfloor structure. Both analytical and experimental methods are used to develop expertise in these areas. Analyses include simplified procedures for estimating energy dissipating capabilities and comprehensive computerized procedures for predicting airframe response. These analyses are developed to provide designers with methods for predicting accelerations, loads, and displacements on collapsing structure. Tests on typical full scale aircraft and on full and subscale structural components are performed to verify the analyses and to demonstrate load attenuating concepts. A special apparatus was built to test emergency locator transmitters when attached to representative aircraft structure. The apparatus is shown to provide a good simulation of the longitudinal crash pulse observed in full scale aircraft crash tests.

The combined effects of alcohol and cannabis on driving: Impact on crash risk.

PubMed

Dubois, Sacha; Mullen, Nadia; Weaver, Bruce; Bédard, Michel

2015-03-01

Driving under the influence of alcohol or cannabis alone is associated with increased crash risk. This study explores the combined influence of low levels of alcohol (BAC≤0.08) and cannabis on crash risk. Drivers aged 20 years or older who had been tested for both drugs and alcohol after involvement in a fatal crash in the United States (1991-2008) were examined using a case-control design. Cases were drivers with at least one potentially unsafe driving action (UDA) recorded in relation to the crash (e.g., weaving); controls had none recorded. We examined the prevalence of driving under the influence of alcohol, cannabis, and both agents, for drivers involved in a fatal crash. Adjusted odds ratios of committing an UDA for alcohol alone, THC alone, and their combined effect were computed via logistic regression and adjusted for a number of potential confounders. Over the past two decades, the prevalence of THC and alcohol in car drivers involved in a fatal crash has increased approximately five-fold from below 2% in 1991 to above 10% in 2008. Each 0.01 BAC unit increased the odds of an UDA by approximately 9-11%. Drivers who were positive for THC alone had 16% increased odds of an UDA. When alcohol and THC were combined the odds of an UDA increased by approximately 8-10% for each 0.01 BAC unit increase over alcohol or THC alone. Drivers positive for both agents had greater odds of making an error than drivers positive for either alcohol or cannabis only. Further research is needed to better examine the interaction between cannabis concentration levels, alcohol, and driving. This research would support enforcement agencies and public health educators by highlighting the combined effect of cannabis at low BAC levels. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Weather impacts on single-vehicle truck crash injury severity.

PubMed

Naik, Bhaven; Tung, Li-Wei; Zhao, Shanshan; Khattak, Aemal J

2016-09-01

The focus of this paper is on illustrating the feasibility of aggregating data from disparate sources to investigate the relationship between single-vehicle truck crash injury severity and detailed weather conditions. Specifically, this paper presents: (a) a methodology that combines detailed 15-min weather station data with crash and roadway data, and (b) an empirical investigation of the effects of weather on crash-related injury severities of single-vehicle truck crashes. Random parameters ordinal and multinomial regression models were used to investigate crash injury severity under different weather conditions, taking into account the individual unobserved heterogeneity. The adopted methodology allowed consideration of environmental, roadway, and climate-related variables in single-vehicle truck crash injury severity. Results showed that wind speed, rain, humidity, and air temperature were linked with single-vehicle truck crash injury severity. Greater recorded wind speed added to the severity of injuries in single-vehicle truck crashes in general. Rain and warmer air temperatures were linked to more severe crash injuries in single-vehicle truck crashes while higher levels of humidity were linked to less severe injuries. Random parameters ordered logit and multinomial logit, respectively, revealed some individual heterogeneity in the data and showed that integrating comprehensive weather data with crash data provided useful insights into factors associated with single-vehicle truck crash injury severity. The research provided a practical method that combined comprehensive 15-min weather station data with crash and roadway data, thereby providing useful insights into crash injury severity of single-vehicle trucks. Those insights are useful for future truck driver educational programs and for truck safety in different weather conditions. Copyright © 2016 Elsevier Ltd and National Safety Council. All rights reserved.

Pregnant woman and road safety: experimental crash test with post mortem human subject.

PubMed

Delotte, Jerome; Behr, Michel; Thollon, Lionel; Arnoux, Pierre-Jean; Baque, Patrick; Bongain, Andre; Brunet, Christian

2008-05-01

Trauma affect between 3 and 7% of all pregnancies in industrialized countries, and the leading cause of these traumas is car crashes. The difficulty to appreciate physiologic and anatomic changes occurring during pregnancy explain that majority of studies were not based on anatomical data. We present a protocol to create a realistic anatomical model of pregnant woman using a post mortem human subject (PMHS). We inserted a physical model of the gravid uterus into the pelvis of a PMHS. 3D acceleration sensors were placed on the subject to measure the acceleration on different body segments. We simulated three frontal impact situations at 20 km/h between two average European cars. Two main kinematics events were identified as possible causes of injuries: lap belt loading and backrest impact. Cadaver experiments provide one interesting complementary approach to study injury mechanisms related to road accidents involving pregnant women. This anatomical accuracy makes it possible to progress in the field of safety devices.

Survey of computer programs for prediction of crash response and of its experimental validation

NASA Technical Reports Server (NTRS)

Kamat, M. P.

1976-01-01

The author seeks to critically assess the potentialities of the mathematical and hybrid simulators which predict post-impact response of transportation vehicles. A strict rigorous numerical analysis of a complex phenomenon like crash may leave a lot to be desired with regard to the fidelity of mathematical simulation. Hybrid simulations on the other hand which exploit experimentally observed features of deformations appear to hold a lot of promise. MARC, ANSYS, NONSAP, DYCAST, ACTION, WHAM II and KRASH are among some of the simulators examined for their capabilities with regard to prediction of post impact response of vehicles. A review of these simulators reveals that much more by way of an analysis capability may be desirable than what is currently available. NASA's crashworthiness testing program in conjunction with similar programs of various other agencies, besides generating a large data base, will be equally useful in the validation of new mathematical concepts of nonlinear analysis and in the successful extension of other techniques in crashworthiness.

Modeling the injury prevention impact of mandatory alcohol ignition interlock installation in all new US vehicles.

PubMed

Carter, Patrick M; Flannagan, Carol A C; Bingham, C Raymond; Cunningham, Rebecca M; Rupp, Jonathan D

2015-05-01

We estimated the injury prevention impact and cost savings associated with alcohol interlock installation in all new US vehicles. We identified fatal and nonfatal injuries associated with drinking driver vehicle crashes from the Fatality Analysis Reporting System and National Automotive Sampling System's General Estimates System data sets (2006-2010). We derived the estimated impact of universal interlock installation using an estimate of the proportion of alcohol-related crashes that were preventable in vehicles < 1 year-old. We repeated this analysis for each subsequent year, assuming a 15-year implementation. We applied existing crash-induced injury cost metrics to approximate economic savings, and we used a sensitivity analysis to examine results with varying device effectiveness. Over 15 years, 85% of crash fatalities (> 59 000) and 84% to 88% of nonfatal injuries (> 1.25 million) attributed to drinking drivers would be prevented, saving an estimated $342 billion in injury-related costs, with the greatest injury and cost benefit realized among recently legal drinking drivers. Cost savings outweighed installation costs after 3 years, with the policy remaining cost effective provided device effectiveness remained above approximately 25%. Alcohol interlock installation in all new vehicles is likely a cost-effective primary prevention policy that will substantially reduce alcohol-involved crash fatalities and injuries, especially among young vulnerable drivers.

Modeling the Injury Prevention Impact of Mandatory Alcohol Ignition Interlock Installation in All New US Vehicles

PubMed Central

Flannagan, Carol A. C.; Bingham, C. Raymond; Cunningham, Rebecca M.; Rupp, Jonathan D.

2015-01-01

Objectives. We estimated the injury prevention impact and cost savings associated with alcohol interlock installation in all new US vehicles. Methods. We identified fatal and nonfatal injuries associated with drinking driver vehicle crashes from the Fatality Analysis Reporting System and National Automotive Sampling System’s General Estimates System data sets (2006–2010). We derived the estimated impact of universal interlock installation using an estimate of the proportion of alcohol-related crashes that were preventable in vehicles < 1 year-old. We repeated this analysis for each subsequent year, assuming a 15-year implementation. We applied existing crash-induced injury cost metrics to approximate economic savings, and we used a sensitivity analysis to examine results with varying device effectiveness. Results. Over 15 years, 85% of crash fatalities (> 59 000) and 84% to 88% of nonfatal injuries (> 1.25 million) attributed to drinking drivers would be prevented, saving an estimated $342 billion in injury-related costs, with the greatest injury and cost benefit realized among recently legal drinking drivers. Cost savings outweighed installation costs after 3 years, with the policy remaining cost effective provided device effectiveness remained above approximately 25%. Conclusions. Alcohol interlock installation in all new vehicles is likely a cost-effective primary prevention policy that will substantially reduce alcohol-involved crash fatalities and injuries, especially among young vulnerable drivers. PMID:25790385

Simulation System of Car Crash Test in C-NCAP Analysis Based on an Improved Apriori Algorithm*

NASA Astrophysics Data System (ADS)

Xiang, LI

In order to analysis car crash test in C-NCAP, an improved algorithm is given based on Apriori algorithm in this paper. The new algorithm is implemented with vertical data layout, breadth first searching, and intersecting. It takes advantage of the efficiency of vertical data layout and intersecting, and prunes candidate frequent item sets like Apriori. Finally, the new algorithm is applied in simulation of car crash test analysis system. The result shows that the relations will affect the C-NCAP test results, and it can provide a reference for the automotive design.

Cars with antilock brakes no longer are overinvolved in fatal crashes

DOT National Transportation Integrated Search

2000-04-15

New tests suggest that cars with antilock braking system no longer are disproportionately involved in certain types of fatal crashes, but antilocks still are not producing reductions in overall fatal crash risk. Since the poor experience of cars with...

Adjusting for car occupant injury liability in relation to age, speed limit, and gender-specific driver crash involvement risk.

PubMed

Keall, Michael; Frith, William

2004-12-01

It is well established that older drivers' fragility is an important factor associated with higher levels of fatal crash involvement for older drivers. There has been less research on age-related fragility with respect to the sort of minor injuries that are more common in injury crashes. This study estimates a quantity that is related to injury fragility: the probability that a driver or a passenger of that driver will be injured in crashes involving two cars. The effects of other factors apart from drivers' fragility are included in this measure, including the fragility of the passengers, the crashworthiness of cars driven, seatbelt use by the occupants, and characteristics of crashes (including configuration and impact speed). The car occupant injury liability estimates appropriately includes these factors to adjust risk curves by age, gender, and speed limit accounting for overrepresentation in crashes associated with fragility and these other factors.

Vehicular Causation Factors and Conceptual Design Modifications to Reduce Aortic Strain in Numerically Reconstructed Real World Nearside Lateral Automotive Crashes

PubMed Central

Yang, King H.

2015-01-01

Aortic injury (AI) leading to disruption of the aorta is an uncommon but highly lethal consequence of trauma in modern society. Most recent estimates range from 7,500 to 8,000 cases per year from a variety of causes. It is observed that more than 80% of occupants who suffer an aortic injury die at the scene due to exsanguination into the chest cavity. It is evident that effective means of substantially improving the outcome of motor vehicle crash-induced AIs is by preventing the injury in the first place. In the current study, 16 design of computer experiments (DOCE) were carried out with varying levels of principal direction of force (PDOF), impact velocity, impact height, and impact position of the bullet vehicle combined with occupant seating positions in the case vehicle to determine the effects of these factors on aortic injury. Further, a combination of real world crash data reported in the Crash Injury Research and Engineering Network (CIREN) database, Finite Element (FE) vehicle models, and the Wayne State Human Body Model-II (WSHBM-II) indicates that occupant seating position, impact height, and PDOF, in that order play, a primary role in aortic injury. PMID:26448781

Computer simulation to aid the risk assessment of wheelchair and special seating systems used in transport.

PubMed

Rogers, P D; Gibson, C; Wilcox, S J; Chong, A

2009-01-01

The crashworthiness of occupied proprietary wheelchairs, which are transported in motor vehicles, is currently assessed by physical crash testing in accordance with ISO 7176-19. If such wheelchairs are modified to meet the needs of the occupant, e.g. the addition of special seating, environmental control systems or life support equipment, then those making the modifications take on the manufacturer's responsibilities, one of these being the assessment of the modified wheelchair's ability to withstand vehicle crash forces. Destructively testing bespoke wheelchair designs is not practical so, currently, the transport-related risk is assessed using best engineering judgement. To improve this process virtual crash testing of the wheelchair and occupant was used. A modified crash criteria from ISO 7176-19 is proposed to enable assessment of the wheelchair's crashworthiness and provide the clinical engineer with an informed judgement of how both wheelchair alone and occupant and wheelchair together will behave in a crash.

Predicting Crashes Using Traffic Offences. A Meta-Analysis that Examines Potential Bias between Self-Report and Archival Data

PubMed Central

af Wåhlberg, Anders; Freeman, James; Watson, Barry; Watson, Angela

2016-01-01

Background Traffic offences have been considered an important predictor of crash involvement, and have often been used as a proxy safety variable for crashes. However the association between crashes and offences has never been meta-analysed and the population effect size never established. Research is yet to determine the extent to which this relationship may be spuriously inflated through systematic measurement error, with obvious implications for researchers endeavouring to accurately identify salient factors predictive of crashes. Methodology and Principal Findings Studies yielding a correlation between crashes and traffic offences were collated and a meta-analysis of 144 effects drawn from 99 road safety studies conducted. Potential impact of factors such as age, time period, crash and offence rates, crash severity and data type, sourced from either self-report surveys or archival records, were considered and discussed. After weighting for sample size, an average correlation of r = .18 was observed over the mean time period of 3.2 years. Evidence emerged suggesting the strength of this correlation is decreasing over time. Stronger correlations between crashes and offences were generally found in studies involving younger drivers. Consistent with common method variance effects, a within country analysis found stronger effect sizes in self-reported data even controlling for crash mean. Significance The effectiveness of traffic offences as a proxy for crashes may be limited. Inclusion of elements such as independently validated crash and offence histories or accurate measures of exposure to the road would facilitate a better understanding of the factors that influence crash involvement. PMID:27128093

Reducing the environmental impact of trials: a comparison of the carbon footprint of the CRASH-1 and CRASH-2 clinical trials

PubMed Central

2011-01-01

Background All sectors of the economy, including the health research sector, must reduce their carbon emissions. The UK National Institute for Health Research has recently prepared guidelines on how to minimize the carbon footprint of research. We compare the carbon emissions from two international clinical trials in order to identify where emissions reductions can be made. Methods We conducted a carbon audit of two clinical trials (the CRASH-1 and CRASH-2 trials), quantifying the carbon dioxide emissions produced over a one-year audit period. Carbon emissions arising from the coordination centre, freight delivery, trial-related travel and commuting were calculated and compared. Results The total emissions in carbon dioxide equivalents during the one-year audit period were 181.3 tonnes for CRASH-1 and 108.2 tonnes for CRASH-2. In total, CRASH-1 emitted 924.6 tonnes of carbon dioxide equivalents compared with 508.5 tonnes for CRASH-2. The CRASH-1 trial recruited 10,008 patients over 5.1 years, corresponding to 92 kg of carbon dioxide per randomized patient. The CRASH-2 trial recruited 20,211 patients over 4.7 years, corresponding to 25 kg of carbon dioxide per randomized patient. The largest contributor to emissions in CRASH-1 was freight delivery of trial materials (86.0 tonnes, 48% of total emissions), whereas the largest contributor in CRASH-2 was energy use by the trial coordination centre (54.6 tonnes, 30% of total emissions). Conclusions Faster patient recruitment in the CRASH-2 trial largely accounted for its greatly increased carbon efficiency in terms of emissions per randomized patient. Lighter trial materials and web-based data entry also contributed to the overall lower carbon emissions in CRASH-2 as compared to CRASH-1. Trial Registration Numbers CRASH-1: ISRCTN74459797 CRASH-2: ISRCTN86750102 PMID:21291517

The impact of environmental factors on traffic accidents in Iran.

PubMed

Lankarani, Kamran B; Heydari, Seyed Taghi; Aghabeigi, Mohammad Reza; Moafian, Ghasem; Hoseinzadeh, Amin; Vossoughi, Mehrdad

2014-07-01

Road traffic crashes are the third highest cause of mortality in Iran. The aim of this study was to determine the impact of roadway environmental factors on traffic crash. This cross-sectional study was conducted in Iran between March 21, 2010 and December 30, 2010. The data on road traffic crashes were obtained from the Traffic Police Department records. These records were classified to control for the main confounders related to the type of crash and roadway environmental factors. Roadway environmental factors included crash scene light, weather, place of accident, the defects and geometrics of roadway and road surface. The study included 542,863 traffic crashes. The proportions of road traffic crash which led to injury were 24.44% at sunrise and 27.16% at sunset compared with 5.43% and 1.43% deaths at sunrise and sunset respectively. In regard to day time accidents, the proportions were 20.50% injuries and 0.55% deaths. The statistical analysis of the results showed that the ratio of injuries and deaths were significantly higher at sunrise and sunset than those occurring during daytime (P less than 0.001). The highest rate of death (5.07%) was due to dusty weather compared to 5.07% for other weather conditions (P less than 0.001). The highest mortality rate (3.45%) occurred on oily surfaces (P less than 0.001). The defective traffic signs were responsible for 30,046 injuries and 5.58% deaths, and road narrowing accounted for 22,775 injuries and, 4.23% deaths which indicated that the roadway defects inflict most frequent injuries and deaths. The lowest (0.74 %) and highest (3.09%) proportion of traffic crash- related deaths were due to flat straight and winding uphill/downhill roads respectively (P less than 0.001). Sunrise, sunset, dusty weather, oily road surfaces and winding uphill/downhill road were hazardous environmental factors. This study provides an insight into the potential impacts of environmental factors on road traffic accidents and underlines the implementation of appropriate preventive measures. © 2014 KUMS, All rights reserved.

Hybrid Aluminum and Natural Fiber Composite Structure for Crash Safety Improvement

NASA Astrophysics Data System (ADS)

Helaili, S.; Chafra, M.; Chevalier, Y.

There is a growing interest on pedestrian's protection in automotive safety standards. Pedestrians head impact is one of the most important tests. In this paper, a hybrid composite structure made from natural fiber and aluminum, which improve the head protection when impact is taken place, is presented. The structure is made from a honeycomb composite made from unidirectional and woven composites and a thin aluminum layer. A head impact model is developed. The number of hexagonal layers is fixed and the thickness of the aluminum layer of the honeycomb structure is varied. The specific absorption energy is then calculated.

Application of a bus seat buffer to mitigate frontal crash effects

NASA Astrophysics Data System (ADS)

Stanisławek, Sebastian; Dziewulski, Paweł; Sławiński, Grzegorz

2018-01-01

The paper considers the problem of coach occupant safety during crash events. The authors present a simple low-cost seat buffer concept which may mitigate the effects of frontal impact. The method of computer simulation was chosen to solve the problem efficiently. The Finite Element Method (FEM) implemented in the LS-DYNA commercial code was used. The testing procedure was based on European Commission regulations, under which vehicles move at a defined speed. Simulations have shown that seat occupants suffer serious trauma during a crash, with the head experiencing relatively high acceleration, thus resulting in an HIC36 of 1490. The installation of a protective buffer mounted on the upper part of the seat reduced the HIC36 to only 510. However, in its current form it does not meet the requirements of the regulations. Further modifications to the overlay shape and structure are essential in order to better improve the deceleration of passengers' bodies. Moreover, a detailed model of seats and their anchorage should be taken into account. A more flexible structure should provide more positive and more accurate results.

General aviation crash safety program at Langley Research Center

NASA Technical Reports Server (NTRS)

Thomson, R. G.

1976-01-01

The purpose of the crash safety program is to support development of the technology to define and demonstrate new structural concepts for improved crash safety and occupant survivability in general aviation aircraft. The program involves three basic areas of research: full-scale crash simulation testing, nonlinear structural analyses necessary to predict failure modes and collapse mechanisms of the vehicle, and evaluation of energy absorption concepts for specific component design. Both analytical and experimental methods are being used to develop expertise in these areas. Analyses include both simplified procedures for estimating energy absorption capabilities and more complex computer programs for analysis of general airframe response. Full-scale tests of typical structures as well as tests on structural components are being used to verify the analyses and to demonstrate improved design concepts.

Safety impacts of rural road construction

DOT National Transportation Integrated Search

2001-02-01

Crash data in Kentucky show that the fatal crash rate on two-lane rural roads is substantially higher than on any other type of road. Improvements have been proposed at some locations on this type of road which involve either upgrading the existing t...

The relationship of alcohol safety laws to drinking drivers in fatal crashes

DOT National Transportation Integrated Search

1999-08-01

This paper presents an analysis of the relationships between the passage of key alcohol safety laws and the number of drinking drivers in fatal crashes. The study evaluated the impact of three major alcohol safety laws (administrative license revocat...

Evaluation of Kentucky's "You Drink and Drive. You Lose" campaign

DOT National Transportation Integrated Search

2002-10-01

Alcohol and drug related crashes continue to be one of the highest priority problem identification areas and considerable emphasis is being placed on programs to impact those types of crashes. Various types of campaigns have been used over the years ...

Safety analytics for integrating crash frequency and real-time risk modeling for expressways.

PubMed

Wang, Ling; Abdel-Aty, Mohamed; Lee, Jaeyoung

2017-07-01

To find crash contributing factors, there have been numerous crash frequency and real-time safety studies, but such studies have been conducted independently. Until this point, no researcher has simultaneously analyzed crash frequency and real-time crash risk to test whether integrating them could better explain crash occurrence. Therefore, this study aims at integrating crash frequency and real-time safety analyses using expressway data. A Bayesian integrated model and a non-integrated model were built: the integrated model linked the crash frequency and the real-time models by adding the logarithm of the estimated expected crash frequency in the real-time model; the non-integrated model independently estimated the crash frequency and the real-time crash risk. The results showed that the integrated model outperformed the non-integrated model, as it provided much better model results for both the crash frequency and the real-time models. This result indicated that the added component, the logarithm of the expected crash frequency, successfully linked and provided useful information to the two models. This study uncovered few variables that are not typically included in the crash frequency analysis. For example, the average daily standard deviation of speed, which was aggregated based on speed at 1-min intervals, had a positive effect on crash frequency. In conclusion, this study suggested a methodology to improve the crash frequency and real-time models by integrating them, and it might inspire future researchers to understand crash mechanisms better. Copyright © 2017 Elsevier Ltd. All rights reserved.

Determination of crash test pulses and their application to aircraft seat analysis

NASA Technical Reports Server (NTRS)

Alfaro-Bou, E.; Williams, M. S.; Fasanella, E. L.

1981-01-01

Deceleration time histories (crash pulses) from a series of twelve light aircraft crash tests conducted at NASA Langley Research Center (LaRC) were analyzed to provide data for seat and airframe design for crashworthiness. Two vertical drop tests at 12.8 m/s (42 ft/s) and 36 G peak deceleration (simulating one of the vertical light aircraft crash pulses) were made using an energy absorbing light aircraft seat prototype. Vertical pelvis acceleration measured in a 50 percentile dummy in the energy absorbing seat were found to be 45% lower than those obtained from the same dummy in a typical light aircraft seat. A hybrid mathematical seat-occupant model was developed using the DYCAST nonlinear finite element computer code and was used to analyze a vertical drop test of the energy absorbing seat. Seat and occupant accelerations predicted by the DYCAST model compared quite favorably with experimental values.