47 CFR 73.510 - Antenna systems.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 47 Telecommunication 4 2012-10-01 2012-10-01 false Antenna systems. 73.510 Section 73.510... Noncommercial Educational FM Broadcast Stations § 73.510 Antenna systems. (a) All noncommercial educational... § 73.316 concerning antenna systems contained in subpart B of this part. (b) Directional antenna. No...

40 CFR 125.80 - What are the purpose and scope of this subpart?

Code of Federal Regulations, 2011 CFR

2011-07-01

... subpart? 125.80 Section 125.80 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS CRITERIA AND STANDARDS FOR THE NATIONAL POLLUTANT DISCHARGE ELIMINATION SYSTEM Requirements Applicable to Cooling Water Intake Structures for New Facilities Under Section 316(b) of the Act § 125.80...

45 CFR 164.316 - Policies and procedures and documentation requirements.

Code of Federal Regulations, 2012 CFR

2012-10-01

...) of this section for 6 years from the date of its creation or the date when it last was in effect... for implementing the procedures to which the documentation pertains. (iii) Updates (Required). Review documentation periodically, and update as needed, in response to environmental or operational changes affecting...

A Holistic Look at Minimizing Adverse Environmental Impact Under Section 316(b) of the Clean Water Act

DOE PAGES

Veil, John A.; Puder, Markus G.; Littleton, Debra J.; ...

2002-01-01

Section 316(b) of the Clean Water Act (CWA) requires that “the location, design, construction, and capacity of cooling water intake structures reflect the best technology available for minimizing adverse environmental impact.” As the U.S. Environmental Protection Agency (EPA) develops new regulations to implement Section 316(b), much of the debate has centered on adverse impingement and entrainment impacts of cooling-water intake structures. Depending on the specific location and intake layout, once-through cooling systems withdrawing many millions of gallons of water per day can, to a varying degree, harm fish and other aquatic organisms in the water bodies from which the coolingmore » water is withdrawn. Therefore, opponents of once-through cooling systems have encouraged the EPA to require wet or dry cooling tower systems as the best technology available (BTA), without considering site-specific conditions. However, within the context of the broader scope of the CWA mandate, this focus seems too narrow. Therefore, this article examines the phrase “minimizing adverse environmental impact” in a holistic light. Emphasis is placed on the analysis of the terms “environmental” and “minimizing.” Congress chose “environmental” in lieu of other more narrowly focused terms like “impingement and entrainment,” “water quality,” or “aquatic life.” In this light, BTA for cooling-water intake structures must minimize the entire suite of environmental impacts, as opposed to just those associated with impingement and entrainment. Wet and dry cooling tower systems work well to minimize entrainment and impingement, but they introduce other equally important impacts because they impose an energy penalty on the power output of the generating unit. The energy penalty results from a reduction in plant operating efficiency and an increase in internal power consumption. As a consequence of the energy penalty, power companies must generate additional electricity to achieve the same net output. This added production leads to additional environmental impacts associated with extraction and processing of the fuel, air emissions from burning the fuel, and additional evaporation of freshwater supplies during the cooling process. Wet towers also require the use of toxic biocides that are subsequently discharged or disposed. The other term under consideration, “minimizing,” does not equal “eliminating.” Technologies may be available to minimize but not totally eliminate adverse environmental impacts.« less

45 CFR 148.316 - Grant application instructions.

Code of Federal Regulations, 2010 CFR

2010-10-01

... application kit (see paragraph (b) of this section) along with the following information: (1) History and... that includes the following: (i) Brief history, including date of inception. (ii) Enrollment criteria... pool, including statutes, regulations and plan of operation. (2) Accounting of risk pool losses...

Corrosion and wear behaviors of boronized AISI 316L stainless steel

NASA Astrophysics Data System (ADS)

Kayali, Yusuf; Büyüksaǧiş, Aysel; Yalçin, Yılmaz

2013-09-01

In this study, the effects of a boronizing treatment on the corrosion and wear behaviors of AISI 316L austenitic stainless steel (AISI 316L) were examined. The corrosion behavior of the boronized samples was studied via electrochemical methods in a simulation body fluid (SBF) and the wear behavior was examined using the ball-on-disk wear method. It was observed that the boride layer that formed on the AISI 316L surface had a flat and smooth morphology. Furthermore, X-ray diffraction analyses show that the boride layer contained FeB, Fe2B, CrB, Cr2B, NiB, and Ni2B phases. Boride layer thickness increased with an increasing boronizing temperature and time. The boronizing treatment also increased the surface hardness of the AISI 316L. Although there was no positive effect of the coating on the corrosion resistance in the SBF medium. Furthermore, a decrease in the friction coefficient was recorded for the boronized AISI 316L. As the boronizing temperature increased, the wear rate decreased in both dry and wet mediums. As a result, the boronizing treatment contributed positively to the wear resistance by increasing the surface hardness and by decreasing the friction coefficient of the AISI 316L.

Report on the FY17 Development of Computer Program for ASME Section III, Division 5, Subsection HB, Subpart B Rules

DOE Office of Scientific and Technical Information (OSTI.GOV)

Swindeman, M. J.; Jetter, R. I.; Sham, T. -L.

One of the objectives of the high temperature design methodology activities is to develop and validate both improvements and the basic features of ASME Boiler and Pressure Vessel Code, Section III, Rules for Construction of Nuclear Facility Components, Division 5, High Temperature Reactors, Subsection HB, Subpart B (HBB). The overall scope of this task is to develop a computer program to aid assessment procedures of components under specified loading conditions in accordance with the elevated temperature design requirements for Division 5 Class A components. There are many features and alternative paths of varying complexity in HBB. The initial focus ofmore » this computer program is a basic path through the various options for a single reference material, 316H stainless steel. However, the computer program is being structured for eventual incorporation all of the features and permitted materials of HBB. This report will first provide a description of the overall computer program, particular challenges in developing numerical procedures for the assessment, and an overall approach to computer program development. This is followed by a more comprehensive appendix, which is the draft computer program manual for the program development. The strain limits rules have been implemented in the computer program. The evaluation of creep-fatigue damage will be implemented in future work scope.« less

Lactic Acid Production from Pretreated Hydrolysates of Corn Stover by a Newly Developed Bacillus coagulans Strain.

PubMed

Jiang, Ting; Qiao, Hui; Zheng, Zhaojuan; Chu, Qiulu; Li, Xin; Yong, Qiang; Ouyang, Jia

2016-01-01

An inhibitor-tolerance strain, Bacillus coagulans GKN316, was developed through atmospheric and room temperature plasma (ARTP) mutation and evolution experiment in condensed dilute-acid hydrolysate (CDH) of corn stover. The fermentabilities of other hydrolysates with B. coagulans GKN316 and the parental strain B. coagulans NL01 were assessed. When using condensed acid-catalyzed steam-exploded hydrolysate (CASEH), condensed acid-catalyzed liquid hot water hydrolysate (CALH) and condensed acid-catalyzed sulfite hydrolysate (CASH) as substrates, the concentration of lactic acid reached 45.39, 16.83, and 18.71 g/L by B. coagulans GKN316, respectively. But for B. coagulans NL01, only CASEH could be directly fermented to produce 15.47 g/L lactic acid. The individual inhibitory effect of furfural, 5-hydroxymethylfurfural (HMF), vanillin, syringaldehyde and p-hydroxybenzaldehyde (pHBal) on xylose utilization by B. coagulans GKN316 was also studied. The strain B. coagulans GKN316 could effectively convert these toxic inhibitors to the less toxic corresponding alcohols in situ. These results suggested that B. coagulans GKN316 was well suited to production of lactic acid from undetoxified lignocellulosic hydrolysates.

Lactic Acid Production from Pretreated Hydrolysates of Corn Stover by a Newly Developed Bacillus coagulans Strain

PubMed Central

Jiang, Ting; Qiao, Hui; Zheng, Zhaojuan; Chu, Qiulu; Li, Xin; Yong, Qiang; Ouyang, Jia

2016-01-01

An inhibitor-tolerance strain, Bacillus coagulans GKN316, was developed through atmospheric and room temperature plasma (ARTP) mutation and evolution experiment in condensed dilute-acid hydrolysate (CDH) of corn stover. The fermentabilities of other hydrolysates with B. coagulans GKN316 and the parental strain B. coagulans NL01 were assessed. When using condensed acid-catalyzed steam-exploded hydrolysate (CASEH), condensed acid-catalyzed liquid hot water hydrolysate (CALH) and condensed acid-catalyzed sulfite hydrolysate (CASH) as substrates, the concentration of lactic acid reached 45.39, 16.83, and 18.71 g/L by B. coagulans GKN316, respectively. But for B. coagulans NL01, only CASEH could be directly fermented to produce 15.47 g/L lactic acid. The individual inhibitory effect of furfural, 5-hydroxymethylfurfural (HMF), vanillin, syringaldehyde and p-hydroxybenzaldehyde (pHBal) on xylose utilization by B. coagulans GKN316 was also studied. The strain B. coagulans GKN316 could effectively convert these toxic inhibitors to the less toxic corresponding alcohols in situ. These results suggested that B. coagulans GKN316 was well suited to production of lactic acid from undetoxified lignocellulosic hydrolysates. PMID:26863012

32 CFR 117.54 - Policy.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Agency Central Security Service (NSA/CSS) Policy Manual 3-16, “Control of Communications Security Material” (available to authorized users of SIPRNET at www.iad.nsa.smil.mil/resources/library/nsa_office_of_policy_section/pdf/NSA_CSS_MAN-3-16_080505.pdf). (b) Adversely affecting the performance of classified...

21 CFR 316.10 - Content and format of a request for written recommendations.

Code of Federal Regulations, 2014 CFR

2014-04-01

.... (8) The basis for concluding that the drug is for a disease or condition that is rare in the United... paragraphs (b)(9) and (b)(10) of this section support the rationale for use of the drug in the rare disease... studied for the rare disease or condition and a summary and analysis of any available data from such...

21 CFR 316.10 - Content and format of a request for written recommendations.

Code of Federal Regulations, 2013 CFR

2013-04-01

.... (8) The basis for concluding that the drug is for a disease or condition that is rare in the United... paragraphs (b)(9) and (b)(10) of this section support the rationale for use of the drug in the rare disease... studied for the rare disease or condition and a summary and analysis of any available data from such...

21 CFR 316.10 - Content and format of a request for written recommendations.

Code of Federal Regulations, 2012 CFR

2012-04-01

.... (8) The basis for concluding that the drug is for a disease or condition that is rare in the United... paragraphs (b)(9) and (b)(10) of this section support the rationale for use of the drug in the rare disease... studied for the rare disease or condition and a summary and analysis of any available data from such...

40 CFR 125.86 - As an owner or operator of a new facility, what must I collect and submit when I apply for my new...

Code of Federal Regulations, 2010 CFR

2010-07-01

... additional chemical, water quality, and other anthropogenic stresses on the source waterbody. (B) Evaluation... 125.86 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS CRITERIA... Cooling Water Intake Structures for New Facilities Under Section 316(b) of the Act § 125.86 As an owner or...

40 CFR 125.86 - As an owner or operator of a new facility, what must I collect and submit when I apply for my new...

Code of Federal Regulations, 2011 CFR

2011-07-01

... additional chemical, water quality, and other anthropogenic stresses on the source waterbody. (B) Evaluation... 125.86 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS CRITERIA... Cooling Water Intake Structures for New Facilities Under Section 316(b) of the Act § 125.86 As an owner or...

L2 Milestone 5433: Characterization of Dynamic Behavior of AM and Conventionally Processed Stainless Steel (316L and 304L)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gray, George Thompson; Livescu, Veronica; Rigg, P. A.

For additive manufacturing (AM) of metallic materials, the certification and qualification paradigm needs to evolve as there currently exists no broadly accepted “ASTM- or DIN-type” additive manufacturing certified process or AM-material produced specifications. Accordingly, design, manufacture, and thereafter implementation and insertion of AM materials to meet engineering applications requires detailed quantification of the constitutive (strength and damage) properties of these evolving materials, across the spectrum of metallic AM methods, in comparison/contrast to conventionally-manufactured metals and alloys. This report summarizes the 316L SS research results and presents initial results of the follow-on study of 304L SS. For the AM-316L SS investigation,more » cylindrical samples of 316L SS were produced using a LENS MR-7 laser additive manufacturing system from Optomec (Albuquerque, NM) equipped with a 1kW Yb-fiber laser. The microstructure of the AM-316L SS was characterized in both the “as-built” Additively Manufactured state and following a heat-treatment designed to obtain full recrystallization to facilitate comparison with annealed wrought 316L SS. The dynamic shock-loading-induced damage evolution and failure response of all three 316L SS materials was quantified using flyer-plate impact driven spallation experiments at peak stresses of 4.5 and 6.35 GPa. The results of these studies are reported in detail in the first section of the report. Publication of the 316L SS results in an archival journal is planned. Following on from the 316L SS completed work, initial results on a study of AM 304L SS are in progress and presented herein. Preliminary results on the structure/dynamic spallation property behavior of AM-304L SS fabricated using both the directed-energy LENS and an EOS powder-bed AM techniques in comparison to wrought 304L SS is detailed in this Level 2 Milestone report.« less

CALL-FOR-ABSTRACTS: SYMPOSIUM ON TECHNOLOGIES FOR PROTECTING AQUATIC ORGANISMS FROM COOLING WATER INTAKE STRUCTURES

EPA Science Inventory

Section 316(b) of the Clean Water Act requires EPA to ensure that the location, design, construction, and capacity of cooling water intake structures reflect the best technology available for minimizing adverse environmental impacts. In February 2002, the EPA approved a proposed ...

20 CFR 633.316 - Closeout procedures.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Closeout procedures. 633.316 Section 633.316 Employees' Benefits EMPLOYMENT AND TRAINING ADMINISTRATION, DEPARTMENT OF LABOR MIGRANT AND SEASONAL FARMWORKER PROGRAMS Program Design and Administrative Procedures § 633.316 Closeout procedures. Grant...

7 CFR 1980.316 - Environmental requirements.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 14 2010-01-01 2009-01-01 true Environmental requirements. 1980.316 Section 1980.316...) PROGRAM REGULATIONS (CONTINUED) GENERAL Rural Housing Loans § 1980.316 Environmental requirements. The... completing environmental assessments when necessary. The RHS approval official will utilize adequate...

7 CFR 1980.316 - Environmental requirements.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 14 2011-01-01 2011-01-01 false Environmental requirements. 1980.316 Section 1980.316...) PROGRAM REGULATIONS (CONTINUED) GENERAL Rural Housing Loans § 1980.316 Environmental requirements. The... completing environmental assessments when necessary. The RHS approval official will utilize adequate...

7 CFR 58.316 - Conventional churns.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 3 2010-01-01 2010-01-01 false Conventional churns. 58.316 Section 58.316 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards....316 Conventional churns. Churns shall be constructed of aluminum, stainless steel or equally corrosion...

48 CFR 46.316 - Responsibility for supplies.

Code of Federal Regulations, 2010 CFR

2010-10-01

... supplies. 46.316 Section 46.316 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION CONTRACT MANAGEMENT QUALITY ASSURANCE Contract Clauses 46.316 Responsibility for supplies. The contracting officer shall insert the clause at 52.246-16, Responsibility for Supplies, in solicitations and contracts...

7 CFR 58.316 - Conventional churns.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 3 2011-01-01 2011-01-01 false Conventional churns. 58.316 Section 58.316 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards....316 Conventional churns. Churns shall be constructed of aluminum, stainless steel or equally corrosion...

14 CFR 121.316 - Fuel tanks.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 14 Aeronautics and Space 3 2014-01-01 2014-01-01 false Fuel tanks. 121.316 Section 121.316 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) AIR CARRIERS..., FLAG, AND SUPPLEMENTAL OPERATIONS Instrument and Equipment Requirements § 121.316 Fuel tanks. Each...

14 CFR 121.316 - Fuel tanks.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Fuel tanks. 121.316 Section 121.316 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) AIR CARRIERS..., FLAG, AND SUPPLEMENTAL OPERATIONS Instrument and Equipment Requirements § 121.316 Fuel tanks. Each...

14 CFR 121.316 - Fuel tanks.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 14 Aeronautics and Space 3 2013-01-01 2013-01-01 false Fuel tanks. 121.316 Section 121.316 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) AIR CARRIERS..., FLAG, AND SUPPLEMENTAL OPERATIONS Instrument and Equipment Requirements § 121.316 Fuel tanks. Each...

14 CFR 121.316 - Fuel tanks.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 3 2011-01-01 2011-01-01 false Fuel tanks. 121.316 Section 121.316 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) AIR CARRIERS..., FLAG, AND SUPPLEMENTAL OPERATIONS Instrument and Equipment Requirements § 121.316 Fuel tanks. Each...

14 CFR 121.316 - Fuel tanks.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 14 Aeronautics and Space 3 2012-01-01 2012-01-01 false Fuel tanks. 121.316 Section 121.316 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) AIR CARRIERS..., FLAG, AND SUPPLEMENTAL OPERATIONS Instrument and Equipment Requirements § 121.316 Fuel tanks. Each...

23 CFR 450.316 - Interested parties, participation, and consultation.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 23 Highways 1 2010-04-01 2010-04-01 false Interested parties, participation, and consultation. 450.316 Section 450.316 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PLANNING AND RESEARCH PLANNING ASSISTANCE AND STANDARDS Metropolitan Transportation Planning and Programming § 450.316...

46 CFR 502.316 - Intervention.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 9 2012-10-01 2012-10-01 false Intervention. 502.316 Section 502.316 Shipping FEDERAL MARITIME COMMISSION GENERAL AND ADMINISTRATIVE PROVISIONS RULES OF PRACTICE AND PROCEDURE Formal Procedure for Adjudication of Small Claims § 502.316 Intervention. Intervention will ordinarily not be permitted...

46 CFR 502.316 - Intervention.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 9 2010-10-01 2010-10-01 false Intervention. 502.316 Section 502.316 Shipping FEDERAL MARITIME COMMISSION GENERAL AND ADMINISTRATIVE PROVISIONS RULES OF PRACTICE AND PROCEDURE Formal Procedure for Adjudication of Small Claims § 502.316 Intervention. Intervention will ordinarily not be permitted...

46 CFR 502.316 - Intervention.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 9 2013-10-01 2013-10-01 false Intervention. 502.316 Section 502.316 Shipping FEDERAL MARITIME COMMISSION GENERAL AND ADMINISTRATIVE PROVISIONS RULES OF PRACTICE AND PROCEDURE Formal Procedure for Adjudication of Small Claims § 502.316 Intervention. Intervention will ordinarily not be permitted...

46 CFR 502.316 - Intervention.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 9 2014-10-01 2014-10-01 false Intervention. 502.316 Section 502.316 Shipping FEDERAL MARITIME COMMISSION GENERAL AND ADMINISTRATIVE PROVISIONS RULES OF PRACTICE AND PROCEDURE Formal Procedure for Adjudication of Small Claims § 502.316 Intervention. Intervention will ordinarily not be permitted...

46 CFR 502.316 - Intervention.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 9 2011-10-01 2011-10-01 false Intervention. 502.316 Section 502.316 Shipping FEDERAL MARITIME COMMISSION GENERAL AND ADMINISTRATIVE PROVISIONS RULES OF PRACTICE AND PROCEDURE Formal Procedure for Adjudication of Small Claims § 502.316 Intervention. Intervention will ordinarily not be permitted...

23 CFR 450.316 - Interested parties, participation, and consultation.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 23 Highways 1 2011-04-01 2011-04-01 false Interested parties, participation, and consultation. 450.316 Section 450.316 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PLANNING AND RESEARCH PLANNING ASSISTANCE AND STANDARDS Metropolitan Transportation Planning and Programming § 450.316...

40 CFR 125.138 - As an owner or operator of a new offshore oil and gas extraction facility, must I keep records...

Code of Federal Regulations, 2013 CFR

2013-07-01

... offshore oil and gas extraction facility, must I keep records and report? 125.138 Section 125.138... Intake Structures for New Offshore Oil and Gas Extraction Facilities Under Section 316(b) of the Act § 125.138 As an owner or operator of a new offshore oil and gas extraction facility, must I keep records...

40 CFR 125.138 - As an owner or operator of a new offshore oil and gas extraction facility, must I keep records...

Code of Federal Regulations, 2014 CFR

2014-07-01

... offshore oil and gas extraction facility, must I keep records and report? 125.138 Section 125.138... Intake Structures for New Offshore Oil and Gas Extraction Facilities Under Section 316(b) of the Act § 125.138 As an owner or operator of a new offshore oil and gas extraction facility, must I keep records...

40 CFR 125.138 - As an owner or operator of a new offshore oil and gas extraction facility, must I keep records...

Code of Federal Regulations, 2010 CFR

2010-07-01

... offshore oil and gas extraction facility, must I keep records and report? 125.138 Section 125.138... Intake Structures for New Offshore Oil and Gas Extraction Facilities Under Section 316(b) of the Act § 125.138 As an owner or operator of a new offshore oil and gas extraction facility, must I keep records...

40 CFR 125.138 - As an owner or operator of a new offshore oil and gas extraction facility, must I keep records...

Code of Federal Regulations, 2012 CFR

2012-07-01

... offshore oil and gas extraction facility, must I keep records and report? 125.138 Section 125.138... Intake Structures for New Offshore Oil and Gas Extraction Facilities Under Section 316(b) of the Act § 125.138 As an owner or operator of a new offshore oil and gas extraction facility, must I keep records...

40 CFR 125.138 - As an owner or operator of a new offshore oil and gas extraction facility, must I keep records...

Code of Federal Regulations, 2011 CFR

2011-07-01

... offshore oil and gas extraction facility, must I keep records and report? 125.138 Section 125.138... Intake Structures for New Offshore Oil and Gas Extraction Facilities Under Section 316(b) of the Act § 125.138 As an owner or operator of a new offshore oil and gas extraction facility, must I keep records...

Micro-Abrasion Wear Resistance of Borided 316L Stainless Steel and AISI 1018 Steel

NASA Astrophysics Data System (ADS)

Reséndiz-Calderon, C. D.; Rodríguez-Castro, G. A.; Meneses-Amador, A.; Campos-Silva, I. E.; Andraca-Adame, J.; Palomar-Pardavé, M. E.; Gallardo-Hernández, E. A.

2017-11-01

The 316L stainless steel has high corrosion resistance but low tribological performance. In different industrial sectors (biomedical, chemical, petrochemical, and nuclear engineering), improvement upon wear resistance of 316L stainless steel components using accessible and inexpensive methods is critical. The AISI 1018 steel is widely used in industry, but its tribological performance is not the best among steels. Therefore, in this study the behavior of the borided 316L stainless steel and 1018 steel is evaluated under micro-abrasion wear. The boriding was carried out at 1223 K over 6 h of exposure time, resulting in a biphase layer composed of FeB/Fe2B phases. In order to evaluate Fe2B phase with no influence from FeB phase, AISI 1018 steel samples were borided at 1273 K for over 20 min and then diffusion annealed at 1273 K over 2 h to obtain a Fe2B mono-phase layer. Micro-abrasion wear resistance was evaluated by a commercial micro-abrasion testing rig using a mix of F-1200 SiC particles with deionized water as abrasive slurry. The obtained wear rates for FeB and Fe2B phases and for the 316L stainless steel were compared. Wear resistance of 316L stainless steel increases after boriding. The wear mechanisms for both phases and for the stainless steel were identified. Also, transient conditions for rolling and grooving abrasion were determined for the FeB and Fe2B phases.

40 CFR 600.316-78 - Multistage manufacture.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 29 2010-07-01 2010-07-01 false Multistage manufacture. 600.316-78 Section 600.316-78 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) ENERGY POLICY... and Later Model Year Automobiles-Labeling § 600.316-78 Multistage manufacture. Where more than one...

10 CFR 590.316 - Shortened proceedings.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 4 2010-01-01 2010-01-01 false Shortened proceedings. 590.316 Section 590.316 Energy DEPARTMENT OF ENERGY (CONTINUED) NATURAL GAS (ECONOMIC REGULATORY ADMINISTRATION) ADMINISTRATIVE PROCEDURES WITH RESPECT TO THE IMPORT AND EXPORT OF NATURAL GAS Procedures § 590.316 Shortened proceedings. In any...

27 CFR 19.316 - Distillation.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Distillation. 19.316 Section 19.316 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS DISTILLED SPIRITS PLANTS Production § 19.316 Distillation. The distillation...

32 CFR 316.1 - Purpose.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 32 National Defense 2 2010-07-01 2010-07-01 false Purpose. 316.1 Section 316.1 National Defense Department of Defense (Continued) OFFICE OF THE SECRETARY OF DEFENSE (CONTINUED) PRIVACY PROGRAM DEFENSE INFORMATION SYSTEMS AGENCY PRIVACY PROGRAM § 316.1 Purpose. This part delineates responsibility and provides...

38 CFR 3.16 - Service pension.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 38 Pensions, Bonuses, and Veterans' Relief 1 2012-07-01 2012-07-01 false Service pension. 3.16 Section 3.16 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS AFFAIRS ADJUDICATION Pension, Compensation, and Dependency and Indemnity Compensation General § 3.16 Service pension. In computing the 70 or...

38 CFR 3.16 - Service pension.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 38 Pensions, Bonuses, and Veterans' Relief 1 2011-07-01 2011-07-01 false Service pension. 3.16 Section 3.16 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS AFFAIRS ADJUDICATION Pension, Compensation, and Dependency and Indemnity Compensation General § 3.16 Service pension. In computing the 70 or...

38 CFR 3.16 - Service pension.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 38 Pensions, Bonuses, and Veterans' Relief 1 2010-07-01 2010-07-01 false Service pension. 3.16 Section 3.16 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS AFFAIRS ADJUDICATION Pension, Compensation, and Dependency and Indemnity Compensation General § 3.16 Service pension. In computing the 70 or...

38 CFR 3.16 - Service pension.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 38 Pensions, Bonuses, and Veterans' Relief 1 2014-07-01 2014-07-01 false Service pension. 3.16 Section 3.16 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS AFFAIRS ADJUDICATION Pension, Compensation, and Dependency and Indemnity Compensation General § 3.16 Service pension. In computing the 70 or...

38 CFR 3.16 - Service pension.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 38 Pensions, Bonuses, and Veterans' Relief 1 2013-07-01 2013-07-01 false Service pension. 3.16 Section 3.16 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS AFFAIRS ADJUDICATION Pension, Compensation, and Dependency and Indemnity Compensation General § 3.16 Service pension. In computing the 70 or...

31 CFR 540.316 - Uranium enrichment.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Uranium enrichment. 540.316 Section 540.316 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF... REGULATIONS General Definitions § 540.316 Uranium enrichment. The term uranium enrichment means the process of...

42 CFR 403.316 - Reconsideration of certain denied applications.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 2 2010-10-01 2010-10-01 false Reconsideration of certain denied applications. 403.316 Section 403.316 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND... Control Systems § 403.316 Reconsideration of certain denied applications. (a) Request for reconsideration...

50 CFR 660.316 - Open access fishery-observer requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 50 Wildlife and Fisheries 11 2011-10-01 2011-10-01 false Open access fishery-observer requirements. 660.316 Section 660.316 Wildlife and Fisheries FISHERY CONSERVATION AND MANAGEMENT, NATIONAL OCEANIC... West Coast Groundfish-Open Access Fisheries § 660.316 Open access fishery—observer requirements. (a...

50 CFR 660.316 - Open access fishery-observer requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 50 Wildlife and Fisheries 9 2010-10-01 2010-10-01 false Open access fishery-observer requirements. 660.316 Section 660.316 Wildlife and Fisheries FISHERY CONSERVATION AND MANAGEMENT, NATIONAL OCEANIC... West Coast Groundfish-Open Access Fisheries § 660.316 Open access fishery—observer requirements. (a...

50 CFR 660.316 - Open access fishery-observer requirements.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 50 Wildlife and Fisheries 13 2013-10-01 2013-10-01 false Open access fishery-observer requirements. 660.316 Section 660.316 Wildlife and Fisheries FISHERY CONSERVATION AND MANAGEMENT, NATIONAL OCEANIC... West Coast Groundfish-Open Access Fisheries § 660.316 Open access fishery—observer requirements. (a...

50 CFR 660.316 - Open access fishery-observer requirements.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 50 Wildlife and Fisheries 13 2012-10-01 2012-10-01 false Open access fishery-observer requirements. 660.316 Section 660.316 Wildlife and Fisheries FISHERY CONSERVATION AND MANAGEMENT, NATIONAL OCEANIC... West Coast Groundfish-Open Access Fisheries § 660.316 Open access fishery—observer requirements. (a...

50 CFR 660.316 - Open access fishery-observer requirements.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 50 Wildlife and Fisheries 13 2014-10-01 2014-10-01 false Open access fishery-observer requirements. 660.316 Section 660.316 Wildlife and Fisheries FISHERY CONSERVATION AND MANAGEMENT, NATIONAL OCEANIC... West Coast Groundfish-Open Access Fisheries § 660.316 Open access fishery—observer requirements. (a...

32 CFR 316.3 - Authority.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 32 National Defense 2 2010-07-01 2010-07-01 false Authority. 316.3 Section 316.3 National Defense Department of Defense (Continued) OFFICE OF THE SECRETARY OF DEFENSE (CONTINUED) PRIVACY PROGRAM DEFENSE INFORMATION SYSTEMS AGENCY PRIVACY PROGRAM § 316.3 Authority. This part is published in accordance with the...

32 CFR 316.7 - Questions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 32 National Defense 2 2010-07-01 2010-07-01 false Questions. 316.7 Section 316.7 National Defense Department of Defense (Continued) OFFICE OF THE SECRETARY OF DEFENSE (CONTINUED) PRIVACY PROGRAM DEFENSE INFORMATION SYSTEMS AGENCY PRIVACY PROGRAM § 316.7 Questions. Questions on both the substance and procedure of...

31 CFR 585.316 - United States.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States. 585.316 Section 585.316 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF... General Definitions § 585.316 United States. The term United States means the United States, its...

40 CFR 600.316-08 - Multistage manufacture.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 31 2013-07-01 2013-07-01 false Multistage manufacture. 600.316-08 Section 600.316-08 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) ENERGY POLICY FUEL ECONOMY AND GREENHOUSE GAS EXHAUST EMISSIONS OF MOTOR VEHICLES Fuel Economy Labeling § 600.316-08...

40 CFR 600.316-08 - Multistage manufacture.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 31 2012-07-01 2012-07-01 false Multistage manufacture. 600.316-08 Section 600.316-08 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) ENERGY POLICY FUEL ECONOMY AND GREENHOUSE GAS EXHAUST EMISSIONS OF MOTOR VEHICLES Fuel Economy Labeling § 600.316-08...

40 CFR 600.316-08 - Multistage manufacture.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 30 2014-07-01 2014-07-01 false Multistage manufacture. 600.316-08 Section 600.316-08 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) ENERGY POLICY FUEL ECONOMY AND GREENHOUSE GAS EXHAUST EMISSIONS OF MOTOR VEHICLES Fuel Economy Labeling § 600.316-08...

5 CFR 316.403 - Designation of provisional appointments.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Designation of provisional appointments. 316.403 Section 316.403 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT CIVIL SERVICE REGULATIONS TEMPORARY AND TERM EMPLOYMENT Temporary Limited Employment § 316.403 Designation of provisional appointments. (a) Conditions for designation. A...

10 CFR 600.316 - Audits.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 4 2010-01-01 2010-01-01 false Audits. 600.316 Section 600.316 Energy DEPARTMENT OF... Grants and Cooperative Agreements With For-Profit Organizations Post-Award Requirements § 600.316 Audits. (a) Any recipient that expends $500,000 or more in a year under Federal awards must have an audit...

31 CFR 598.316 - Transfer.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 31 Money and Finance:Treasury 3 2012-07-01 2012-07-01 false Transfer. 598.316 Section 598.316 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF FOREIGN... Definitions § 598.316 Transfer. The term transfer means any actual or purported act or transaction, whether or...

31 CFR 598.316 - Transfer.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 31 Money and Finance:Treasury 3 2011-07-01 2011-07-01 false Transfer. 598.316 Section 598.316 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF FOREIGN... Definitions § 598.316 Transfer. The term transfer means any actual or purported act or transaction, whether or...

31 CFR 598.316 - Transfer.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 31 Money and Finance:Treasury 3 2014-07-01 2014-07-01 false Transfer. 598.316 Section 598.316 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF FOREIGN... Definitions § 598.316 Transfer. The term transfer means any actual or purported act or transaction, whether or...

31 CFR 598.316 - Transfer.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Transfer. 598.316 Section 598.316 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF FOREIGN... Definitions § 598.316 Transfer. The term transfer means any actual or purported act or transaction, whether or...

31 CFR 598.316 - Transfer.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 31 Money and Finance:Treasury 3 2013-07-01 2013-07-01 false Transfer. 598.316 Section 598.316 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF FOREIGN... Definitions § 598.316 Transfer. The term transfer means any actual or purported act or transaction, whether or...

31 CFR 560.316 - New investment.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false New investment. 560.316 Section 560.316 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF... § 560.316 New investment. The term new investment means a transaction after 12:01 EDT, May 7, 1995, that...

31 CFR 560.316 - New investment.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 31 Money and Finance:Treasury 3 2011-07-01 2011-07-01 false New investment. 560.316 Section 560.316 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF... § 560.316 New investment. The term new investment means a transaction after 12:01 EDT, May 7, 1995, that...

30 CFR 285.316 - What payments are required for ROW grants or RUE grants?

Code of Federal Regulations, 2011 CFR

2011-07-01

... RUE grants? 285.316 Section 285.316 Mineral Resources BUREAU OF OCEAN ENERGY MANAGEMENT, REGULATION, AND ENFORCEMENT, DEPARTMENT OF THE INTERIOR OFFSHORE RENEWABLE ENERGY ALTERNATE USES OF EXISTING... Renewable Energy Activities Financial Requirements for Row Grants and Rue Grants § 285.316 What payments are...

31 CFR 316.12 - Fiscal agents.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 31 Money and Finance: Treasury 2 2010-07-01 2010-07-01 false Fiscal agents. 316.12 Section 316.12 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) FISCAL SERVICE, DEPARTMENT OF THE TREASURY BUREAU OF THE PUBLIC DEBT OFFERING OF UNITED STATES SAVINGS BONDS, SERIES E § 316...

31 CFR 316.4 - Registration.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 31 Money and Finance: Treasury 2 2010-07-01 2010-07-01 false Registration. 316.4 Section 316.4 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) FISCAL SERVICE, DEPARTMENT OF THE TREASURY BUREAU OF THE PUBLIC DEBT OFFERING OF UNITED STATES SAVINGS BONDS, SERIES E § 316...

31 CFR 316.3 - Governing regulations.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 31 Money and Finance: Treasury 2 2010-07-01 2010-07-01 false Governing regulations. 316.3 Section 316.3 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) FISCAL SERVICE, DEPARTMENT OF THE TREASURY BUREAU OF THE PUBLIC DEBT OFFERING OF UNITED STATES SAVINGS BONDS, SERIES E § 316...

32 CFR 316.5 - Policy.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 32 National Defense 2 2010-07-01 2010-07-01 false Policy. 316.5 Section 316.5 National Defense Department of Defense (Continued) OFFICE OF THE SECRETARY OF DEFENSE (CONTINUED) PRIVACY PROGRAM DEFENSE INFORMATION SYSTEMS AGENCY PRIVACY PROGRAM § 316.5 Policy. It is the policy of DISA: (a) To preserve the...

47 CFR 73.316 - FM antenna systems.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 47 Telecommunication 4 2012-10-01 2012-10-01 false FM antenna systems. 73.316 Section 73.316... Broadcast Stations § 73.316 FM antenna systems. (a) It shall be standard to employ horizontal polarization...) Directional antennas. A directional antenna is an antenna that is designed or altered for the purpose of...

47 CFR 73.316 - FM antenna systems.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 47 Telecommunication 4 2014-10-01 2014-10-01 false FM antenna systems. 73.316 Section 73.316... Broadcast Stations § 73.316 FM antenna systems. (a) It shall be standard to employ horizontal polarization...) Directional antennas. A directional antenna is an antenna that is designed or altered for the purpose of...

47 CFR 73.316 - FM antenna systems.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 4 2010-10-01 2010-10-01 false FM antenna systems. 73.316 Section 73.316... Broadcast Stations § 73.316 FM antenna systems. (a) It shall be standard to employ horizontal polarization...) Directional antennas. A directional antenna is an antenna that is designed or altered for the purpose of...

47 CFR 73.316 - FM antenna systems.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 47 Telecommunication 4 2011-10-01 2011-10-01 false FM antenna systems. 73.316 Section 73.316... Broadcast Stations § 73.316 FM antenna systems. (a) It shall be standard to employ horizontal polarization...) Directional antennas. A directional antenna is an antenna that is designed or altered for the purpose of...

47 CFR 73.316 - FM antenna systems.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 47 Telecommunication 4 2013-10-01 2013-10-01 false FM antenna systems. 73.316 Section 73.316... Broadcast Stations § 73.316 FM antenna systems. (a) It shall be standard to employ horizontal polarization...) Directional antennas. A directional antenna is an antenna that is designed or altered for the purpose of...

20 CFR 405.316 - Notice of a hearing before an administrative law judge.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 20 Employees' Benefits 2 2010-04-01 2010-04-01 false Notice of a hearing before an administrative law judge. 405.316 Section 405.316 Employees' Benefits SOCIAL SECURITY ADMINISTRATION ADMINISTRATIVE REVIEW PROCESS FOR ADJUDICATING INITIAL DISABILITY CLAIMS Administrative Law Judge Hearing § 405.316...

43 CFR 3.16 - Seizure.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 43 Public Lands: Interior 1 2010-10-01 2010-10-01 false Seizure. 3.16 Section 3.16 Public Lands: Interior Office of the Secretary of the Interior PRESERVATION OF AMERICAN ANTIQUITIES § 3.16 Seizure. Any object of antiquity taken, or collection made, on lands owned or controlled by the United States, without...

21 CFR 316.24 - Granting orphan-drug designation.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 21 Food and Drugs 5 2011-04-01 2011-04-01 false Granting orphan-drug designation. 316.24 Section 316.24 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) DRUGS FOR HUMAN USE ORPHAN DRUGS Designation of an Orphan Drug § 316.24 Granting orphan-drug designation...

21 CFR 316.24 - Granting orphan-drug designation.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 21 Food and Drugs 5 2012-04-01 2012-04-01 false Granting orphan-drug designation. 316.24 Section 316.24 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) DRUGS FOR HUMAN USE ORPHAN DRUGS Designation of an Orphan Drug § 316.24 Granting orphan-drug designation...

21 CFR 316.24 - Granting orphan-drug designation.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 21 Food and Drugs 5 2010-04-01 2010-04-01 false Granting orphan-drug designation. 316.24 Section 316.24 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) DRUGS FOR HUMAN USE ORPHAN DRUGS Designation of an Orphan Drug § 316.24 Granting orphan-drug designation...

21 CFR 316.24 - Granting orphan-drug designation.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 21 Food and Drugs 5 2013-04-01 2013-04-01 false Granting orphan-drug designation. 316.24 Section 316.24 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) DRUGS FOR HUMAN USE ORPHAN DRUGS Designation of an Orphan Drug § 316.24 Granting orphan-drug designation...

31 CFR 316.6 - Purchase of bonds.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 31 Money and Finance: Treasury 2 2010-07-01 2010-07-01 false Purchase of bonds. 316.6 Section 316.6 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) FISCAL SERVICE, DEPARTMENT OF THE TREASURY BUREAU OF THE PUBLIC DEBT OFFERING OF UNITED STATES SAVINGS BONDS, SERIES E § 316...

31 CFR 316.1 - Offering of bonds.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 31 Money and Finance: Treasury 2 2010-07-01 2010-07-01 false Offering of bonds. 316.1 Section 316.1 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) FISCAL SERVICE, DEPARTMENT OF THE TREASURY BUREAU OF THE PUBLIC DEBT OFFERING OF UNITED STATES SAVINGS BONDS, SERIES E § 316...

31 CFR 316.7 - Delivery of bonds.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 31 Money and Finance: Treasury 2 2010-07-01 2010-07-01 false Delivery of bonds. 316.7 Section 316.7 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) FISCAL SERVICE, DEPARTMENT OF THE TREASURY BUREAU OF THE PUBLIC DEBT OFFERING OF UNITED STATES SAVINGS BONDS, SERIES E § 316...

42 CFR 57.316a - Performance standard.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 42 Public Health 1 2013-10-01 2013-10-01 false Performance standard. 57.316a Section 57.316a Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES GRANTS GRANTS FOR... Loans § 57.316a Performance standard. On June 30, 1986, and on each June 30 thereafter, except as...

42 CFR 57.316a - Performance standard.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 1 2010-10-01 2010-10-01 false Performance standard. 57.316a Section 57.316a Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES GRANTS GRANTS FOR... Loans § 57.316a Performance standard. On June 30, 1986, and on each June 30 thereafter, except as...

42 CFR 57.316a - Performance standard.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 42 Public Health 1 2011-10-01 2011-10-01 false Performance standard. 57.316a Section 57.316a Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES GRANTS GRANTS FOR... Loans § 57.316a Performance standard. On June 30, 1986, and on each June 30 thereafter, except as...

42 CFR 57.316a - Performance standard.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 42 Public Health 1 2012-10-01 2012-10-01 false Performance standard. 57.316a Section 57.316a Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES GRANTS GRANTS FOR... Loans § 57.316a Performance standard. On June 30, 1986, and on each June 30 thereafter, except as...

42 CFR 57.316a - Performance standard.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 42 Public Health 1 2014-10-01 2014-10-01 false Performance standard. 57.316a Section 57.316a Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES GRANTS GRANTS FOR... Loans § 57.316a Performance standard. On June 30, 1986, and on each June 30 thereafter, except as...

40 CFR 265.316 - Disposal of small containers of hazardous waste in overpacked drums (lab packs).

Code of Federal Regulations, 2010 CFR

2010-07-01

... OPERATORS OF HAZARDOUS WASTE TREATMENT, STORAGE, AND DISPOSAL FACILITIES Landfills § 265.316 Disposal of small containers of hazardous waste in overpacked drums (lab packs). Small containers of hazardous waste... hazardous waste in overpacked drums (lab packs). 265.316 Section 265.316 Protection of Environment...

40 CFR 264.316 - Disposal of small containers of hazardous waste in overpacked drums (lab packs).

Code of Federal Regulations, 2010 CFR

2010-07-01

... HAZARDOUS WASTE TREATMENT, STORAGE, AND DISPOSAL FACILITIES Landfills § 264.316 Disposal of small containers of hazardous waste in overpacked drums (lab packs). Small containers of hazardous waste in overpacked... hazardous waste in overpacked drums (lab packs). 264.316 Section 264.316 Protection of Environment...

47 CFR 54.316 - Rate comparability review and certification for areas served by non-rural carriers.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Rates, Price Indices, and Expenditures for Telephone Service published by the Wireline Competition... areas served by non-rural carriers. 54.316 Section 54.316 Telecommunication FEDERAL COMMUNICATIONS... High Cost Areas § 54.316 Rate comparability review and certification for areas served by non-rural...

45 CFR 31.6 - Review of Departmental records.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 45 Public Welfare 1 2010-10-01 2010-10-01 false Review of Departmental records. 31.6 Section 31.6 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL ADMINISTRATION TAX REFUND OFFSET § 31.6 Review of Departmental records. (a) To inspect or copy Departmental records relating to the debt, the...

29 CFR 2509.75-9 - Interpretive bulletin relating to guidelines on independence of accountant retained by Employee...

Code of Federal Regulations, 2012 CFR

2012-07-01

...: (1) During the period of professional engagement to examine the financial statements being reported... defined in section 3(16)(B) of the Act. (2) During the period of professional engagement to examine the... professional employees participating in the audit or located in an office of the firm participating in a...

29 CFR 2509.75-9 - Interpretive bulletin relating to guidelines on independence of accountant retained by Employee...

Code of Federal Regulations, 2014 CFR

2014-07-01

...: (1) During the period of professional engagement to examine the financial statements being reported... defined in section 3(16)(B) of the Act. (2) During the period of professional engagement to examine the... professional employees participating in the audit or located in an office of the firm participating in a...

29 CFR 2509.75-9 - Interpretive bulletin relating to guidelines on independence of accountant retained by Employee...

Code of Federal Regulations, 2013 CFR

2013-07-01

...: (1) During the period of professional engagement to examine the financial statements being reported... defined in section 3(16)(B) of the Act. (2) During the period of professional engagement to examine the... professional employees participating in the audit or located in an office of the firm participating in a...

47 CFR 73.3540 - Application for voluntary assignment or transfer of control.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Application for voluntary assignment or transfer of control. (a) Prior consent of the FCC must be obtained for a voluntary assignment or transfer of control. (b) Application should be filed with the FCC at least... “Assignment of license” or FCC Form 316 “Short form” (See paragraph (f) of this section). (d) Application for...

47 CFR 73.3540 - Application for voluntary assignment or transfer of control.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Application for voluntary assignment or transfer of control. (a) Prior consent of the FCC must be obtained for a voluntary assignment or transfer of control. (b) Application should be filed with the FCC at least... “Assignment of license” or FCC Form 316 “Short form” (See paragraph (f) of this section). (d) Application for...

47 CFR 73.3540 - Application for voluntary assignment or transfer of control.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Application for voluntary assignment or transfer of control. (a) Prior consent of the FCC must be obtained for a voluntary assignment or transfer of control. (b) Application should be filed with the FCC at least... “Assignment of license” or FCC Form 316 “Short form” (See paragraph (f) of this section). (d) Application for...

47 CFR 73.3540 - Application for voluntary assignment or transfer of control.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Application for voluntary assignment or transfer of control. (a) Prior consent of the FCC must be obtained for a voluntary assignment or transfer of control. (b) Application should be filed with the FCC at least... “Assignment of license” or FCC Form 316 “Short form” (See paragraph (f) of this section). (d) Application for...

34 CFR 31.6 - Location and timing of oral hearing.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 34 Education 1 2010-07-01 2010-07-01 false Location and timing of oral hearing. 31.6 Section 31.6 Education Office of the Secretary, Department of Education SALARY OFFSET FOR FEDERAL EMPLOYEES WHO ARE INDEBTED TO THE UNITED STATES UNDER PROGRAMS ADMINISTERED BY THE SECRETARY OF EDUCATION § 31.6 Location and...

48 CFR 316.505 - Ordering.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 4 2014-10-01 2014-10-01 false Ordering. 316.505 Section 316.505 Federal Acquisition Regulations System HEALTH AND HUMAN SERVICES CONTRACTING METHODS AND... NIH: Senior Scientific Advisor for Extramural Research, Office of Extramural Research (R & D) and...

48 CFR 316.505 - Ordering.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 48 Federal Acquisition Regulations System 4 2012-10-01 2012-10-01 false Ordering. 316.505 Section 316.505 Federal Acquisition Regulations System HEALTH AND HUMAN SERVICES CONTRACTING METHODS AND... NIH: Senior Scientific Advisor for Extramural Research, Office of Extramural Research (R & D) and...

48 CFR 316.505 - Ordering.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 4 2013-10-01 2013-10-01 false Ordering. 316.505 Section 316.505 Federal Acquisition Regulations System HEALTH AND HUMAN SERVICES CONTRACTING METHODS AND... NIH: Senior Scientific Advisor for Extramural Research, Office of Extramural Research (R & D) and...

7 CFR 1205.316 - Cotton-Producer organization.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 10 2010-01-01 2010-01-01 false Cotton-Producer organization. 1205.316 Section 1205... SERVICE (MARKETING AGREEMENTS AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE COTTON RESEARCH AND PROMOTION Cotton Research and Promotion Order Definitions § 1205.316 Cotton-Producer...

7 CFR 1205.316 - Cotton-Producer organization.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 10 2011-01-01 2011-01-01 false Cotton-Producer organization. 1205.316 Section 1205... SERVICE (MARKETING AGREEMENTS AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE COTTON RESEARCH AND PROMOTION Cotton Research and Promotion Order Definitions § 1205.316 Cotton-Producer...

7 CFR 1205.316 - Cotton-Producer organization.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 10 2013-01-01 2013-01-01 false Cotton-Producer organization. 1205.316 Section 1205... SERVICE (MARKETING AGREEMENTS AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE COTTON RESEARCH AND PROMOTION Cotton Research and Promotion Order Definitions § 1205.316 Cotton-Producer...

7 CFR 1205.316 - Cotton-Producer organization.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 10 2012-01-01 2012-01-01 false Cotton-Producer organization. 1205.316 Section 1205... SERVICE (MARKETING AGREEMENTS AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE COTTON RESEARCH AND PROMOTION Cotton Research and Promotion Order Definitions § 1205.316 Cotton-Producer...

7 CFR 1205.316 - Cotton-Producer organization.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 10 2014-01-01 2014-01-01 false Cotton-Producer organization. 1205.316 Section 1205... SERVICE (MARKETING AGREEMENTS AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE COTTON RESEARCH AND PROMOTION Cotton Research and Promotion Order Definitions § 1205.316 Cotton-Producer...

9 CFR 316.14 - Marking tank cars and tank trucks used in transportation of edible products.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Marking tank cars and tank trucks used in transportation of edible products. 316.14 Section 316.14 Animals and Animal Products FOOD SAFETY... CONTAINERS § 316.14 Marking tank cars and tank trucks used in transportation of edible products. Each tank...

36 CFR 3.16 - May I swim or wade in park waters?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 36 Parks, Forests, and Public Property 1 2010-07-01 2010-07-01 false May I swim or wade in park waters? 3.16 Section 3.16 Parks, Forests, and Public Property NATIONAL PARK SERVICE, DEPARTMENT OF THE INTERIOR BOATING AND WATER USE ACTIVITIES § 3.16 May I swim or wade in park waters? Swimming or wading is...

36 CFR 3.16 - May I swim or wade in park waters?

Code of Federal Regulations, 2011 CFR

2011-07-01

... 36 Parks, Forests, and Public Property 1 2011-07-01 2011-07-01 false May I swim or wade in park waters? 3.16 Section 3.16 Parks, Forests, and Public Property NATIONAL PARK SERVICE, DEPARTMENT OF THE INTERIOR BOATING AND WATER USE ACTIVITIES § 3.16 May I swim or wade in park waters? Swimming or wading is...

27 CFR 19.316 - Redistillation.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2013-04-01 2013-04-01 false Redistillation. 19.316 Section 19.316 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY ALCOHOL DISTILLED SPIRITS PLANTS Production of Distilled Spirits Rules for...

27 CFR 19.316 - Redistillation.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2014-04-01 2014-04-01 false Redistillation. 19.316 Section 19.316 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY ALCOHOL DISTILLED SPIRITS PLANTS Production of Distilled Spirits Rules for...

31 CFR 586.316 - Transfer.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Transfer. 586.316 Section 586.316 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF FOREIGN ASSETS CONTROL, DEPARTMENT OF THE TREASURY FEDERAL REPUBLIC OF YUGOSLAVIA (SERBIA & MONTENEGRO) KOSOVO...

75 FR 35021 - Agency Information Collection Activities; Proposed Collection; Comment Request; Information...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-21

... per day (MGD) or more. Section 316(b) of the Clean Water Act (CWA) requires that any standard... of the rule is estimated to average 1,101 hours per respondent (i.e., an annual average of 46,228 hours of burden divided among an anticipated 42 States on average per year). Burden means the total time...

25 CFR 1000.316 - May the Tribe/Consortium be reimbursed for actual and reasonable “wind up costs” incurred after...

Code of Federal Regulations, 2010 CFR

2010-04-01

... reasonable âwind up costsâ incurred after the effective date of retrocession? 1000.316 Section 1000.316... Reassumption § 1000.316 May the Tribe/Consortium be reimbursed for actual and reasonable “wind up costs” incurred after the effective date of retrocession? Yes, the Tribe/Consortium may be reimbursed for actual...

31 CFR 561.316 - Entity.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 31 Money and Finance:Treasury 3 2011-07-01 2011-07-01 false Entity. 561.316 Section 561.316 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF FOREIGN ASSETS... Entity. The term entity means a partnership, association, trust, joint venture, corporation, or other...

31 CFR 594.316 - Otherwise associated with.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 31 Money and Finance:Treasury 3 2012-07-01 2012-07-01 false Otherwise associated with. 594.316 Section 594.316 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF FOREIGN ASSETS CONTROL, DEPARTMENT OF THE TREASURY GLOBAL TERRORISM SANCTIONS REGULATIONS General...

31 CFR 594.316 - Otherwise associated with.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 31 Money and Finance:Treasury 3 2011-07-01 2011-07-01 false Otherwise associated with. 594.316 Section 594.316 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF FOREIGN ASSETS CONTROL, DEPARTMENT OF THE TREASURY GLOBAL TERRORISM SANCTIONS REGULATIONS General...

31 CFR 594.316 - Otherwise associated with.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Otherwise associated with. 594.316 Section 594.316 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE OF FOREIGN ASSETS CONTROL, DEPARTMENT OF THE TREASURY GLOBAL TERRORISM SANCTIONS REGULATIONS General...

17 CFR 31.6 - Registration of leverage commodities.

Code of Federal Regulations, 2010 CFR

2010-04-01

... commodities. 31.6 Section 31.6 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION... applied to the National Futures Association for registration as a leverage transaction merchant; (2... the spot, forward, and futures markets for the generic commodity; (3) Specify a commercial or retail...

Pilot of the Modern Army Recordkeeping System (MARKS) at Headquarters, U.S. Army Armor Center and Fort Knox, Fort Knox, Kentucky, January-December 1984.

DTIC Science & Technology

1985-05-01

Clothing and Textile Materiel 341 Standardization 36 Audit 37 Financial Administration 410 Medical Services 50 Nuclear and Chemical Weapons and Materiel 55...Transaction Files 314-18 210-60b NAF Report of Audit Files 314-27 36-5a NAF Payroll Control Files 36-75a 316-01 36-2a GAO Audit Reporting Files 36-5b 316-02...ll-7a Internal Review Files 316-03 36-5c AAA Audit Reporting Files 316-15 36-5d DAS Audit Reporting Files 319-12 37-107a Commercial Account Claim

21 CFR 316.12 - Providing written recommendations.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 21 Food and Drugs 5 2010-04-01 2010-04-01 false Providing written recommendations. 316.12 Section...) DRUGS FOR HUMAN USE ORPHAN DRUGS Written Recommendations for Investigations of Orphan Drugs § 316.12 Providing written recommendations. (a) FDA will provide the sponsor with written recommendations concerning...

21 CFR 316.12 - Providing written recommendations.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 21 Food and Drugs 5 2011-04-01 2011-04-01 false Providing written recommendations. 316.12 Section...) DRUGS FOR HUMAN USE ORPHAN DRUGS Written Recommendations for Investigations of Orphan Drugs § 316.12 Providing written recommendations. (a) FDA will provide the sponsor with written recommendations concerning...

45 CFR 164.316 - Policies and procedures and documentation requirements.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 45 Public Welfare 1 2014-10-01 2014-10-01 false Policies and procedures and documentation requirements. 164.316 Section 164.316 Public Welfare Department of Health and Human Services ADMINISTRATIVE DATA STANDARDS AND RELATED REQUIREMENTS SECURITY AND PRIVACY Security Standards for the Protection of...

31 CFR 576.316 - U.S. financial institution.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 31 Money and Finance:Treasury 3 2012-07-01 2012-07-01 false U.S. financial institution. 576.316 Section 576.316 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE... foreign exchange, securities, commodity futures or options, or procuring purchasers and sellers thereof...

31 CFR 576.316 - U.S. financial institution.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 31 Money and Finance:Treasury 3 2014-07-01 2014-07-01 false U.S. financial institution. 576.316 Section 576.316 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE... foreign exchange, securities, commodity futures or options, or procuring purchasers and sellers thereof...

31 CFR 576.316 - U.S. financial institution.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 31 Money and Finance:Treasury 3 2013-07-01 2013-07-01 false U.S. financial institution. 576.316 Section 576.316 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE... foreign exchange, securities, commodity futures or options, or procuring purchasers and sellers thereof...

31 CFR 576.316 - U.S. financial institution.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 31 Money and Finance:Treasury 3 2011-07-01 2011-07-01 false U.S. financial institution. 576.316 Section 576.316 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE... foreign exchange, securities, commodity futures or options, or procuring purchasers and sellers thereof...

31 CFR 540.316 - Uranium enrichment.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 31 Money and Finance:Treasury 3 2013-07-01 2013-07-01 false Uranium enrichment. 540.316 Section... FOREIGN ASSETS CONTROL, DEPARTMENT OF THE TREASURY HIGHLY ENRICHED URANIUM (HEU) AGREEMENT ASSETS CONTROL REGULATIONS General Definitions § 540.316 Uranium enrichment. The term uranium enrichment means the process of...

31 CFR 540.316 - Uranium enrichment.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 31 Money and Finance:Treasury 3 2014-07-01 2014-07-01 false Uranium enrichment. 540.316 Section... FOREIGN ASSETS CONTROL, DEPARTMENT OF THE TREASURY HIGHLY ENRICHED URANIUM (HEU) AGREEMENT ASSETS CONTROL REGULATIONS General Definitions § 540.316 Uranium enrichment. The term uranium enrichment means the process of...

31 CFR 540.316 - Uranium enrichment.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 31 Money and Finance:Treasury 3 2011-07-01 2011-07-01 false Uranium enrichment. 540.316 Section... FOREIGN ASSETS CONTROL, DEPARTMENT OF THE TREASURY HIGHLY ENRICHED URANIUM (HEU) AGREEMENT ASSETS CONTROL REGULATIONS General Definitions § 540.316 Uranium enrichment. The term uranium enrichment means the process of...

31 CFR 540.316 - Uranium enrichment.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 31 Money and Finance:Treasury 3 2012-07-01 2012-07-01 false Uranium enrichment. 540.316 Section... FOREIGN ASSETS CONTROL, DEPARTMENT OF THE TREASURY HIGHLY ENRICHED URANIUM (HEU) AGREEMENT ASSETS CONTROL REGULATIONS General Definitions § 540.316 Uranium enrichment. The term uranium enrichment means the process of...

48 CFR 316.770-2 - Memoranda of understanding.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Memoranda of understanding. 316.770-2 Section 316.770-2 Federal Acquisition Regulations System HEALTH AND HUMAN SERVICES... contrary to the language of the solicitation or prospective contract. A memorandum of understanding does...

48 CFR 316.770-2 - Memoranda of understanding.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 4 2011-10-01 2011-10-01 false Memoranda of understanding. 316.770-2 Section 316.770-2 Federal Acquisition Regulations System HEALTH AND HUMAN SERVICES... contrary to the language of the solicitation or prospective contract. A memorandum of understanding does...

48 CFR 316.770-2 - Memoranda of understanding.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 4 2013-10-01 2013-10-01 false Memoranda of understanding. 316.770-2 Section 316.770-2 Federal Acquisition Regulations System HEALTH AND HUMAN SERVICES... contrary to the language of the solicitation or prospective contract. A memorandum of understanding does...

48 CFR 316.770-2 - Memoranda of understanding.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 48 Federal Acquisition Regulations System 4 2012-10-01 2012-10-01 false Memoranda of understanding. 316.770-2 Section 316.770-2 Federal Acquisition Regulations System HEALTH AND HUMAN SERVICES... contrary to the language of the solicitation or prospective contract. A memorandum of understanding does...

48 CFR 316.770-2 - Memoranda of understanding.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 4 2014-10-01 2014-10-01 false Memoranda of understanding. 316.770-2 Section 316.770-2 Federal Acquisition Regulations System HEALTH AND HUMAN SERVICES... contrary to the language of the solicitation or prospective contract. A memorandum of understanding does...

20 CFR 726.316 - Filing and service.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Filing and service. 726.316 Section 726.316 Employees' Benefits EMPLOYMENT STANDARDS ADMINISTRATION, DEPARTMENT OF LABOR FEDERAL COAL MINE HEALTH AND SAFETY ACT OF 1969, AS AMENDED BLACK LUNG BENEFITS; REQUIREMENTS FOR COAL MINE OPERATOR'S INSURANCE Civil...

Effect of boron addition on injection molded 316L stainless steel: mechanical, corrosion properties and in vitro bioactivity.

PubMed

Bayraktaroglu, Esra; Gulsoy, H Ozkan; Gulsoy, Nagihan; Er, Ozay; Kilic, Hasan

2012-01-01

The research was investigated the effect of boron additions on sintering characteristics, mechanical, corrosion properties and biocompatibility of injection molded austenitic grade 316L stainless steel. Addition of boron is promoted to get high density of sintered 316L stainless steels. The amount of boron plays a role in determining the sintered microstructure and all properties. In this study, 316L stainless steel powders have been used with the elemental NiB powders. A feedstock containing 62.5 wt% powders loading was molded at different injection molded temperature. The binders were completely removed from molded components by solvent and thermal debinding at different temperature. The debinded samples were sintered at different temperature for 60 min. Mechanical property, microstructural characterization and electrochemical property of the sintered samples were performed using tensile testing, hardness, optical, scanning electron microscopy and electrochemical corrosion experiments. Sintered samples were immersed in a simulated body fluid (SBF) with elemental concentrations that were comparable to those of human blood plasma for a total period of 15 days. Both materials were implanted in fibroblast culture for biocompatibility evaluations were carried out. Results of study showed that sintered 316L and 316L with NiB addition samples exhibited high mechanical and corrosion properties in a physiological environment. Especially, 316L with NiB addition can be used in some bioapplications.

Optimization of the bake-on siliconization of cartridges. Part II: Investigations into burn-in time and temperature.

PubMed

Funke, Stefanie; Matilainen, Julia; Nalenz, Heiko; Bechtold-Peters, Karoline; Mahler, Hanns-Christian; Vetter, Florian; Müller, Christoph; Bracher, Franz; Friess, Wolfgang

2016-08-01

Combination products have become popular formats for the delivery of parenteral medications. Bake-on siliconization of glass syringes or cartridges allows good piston break-loose and gliding during injection at low silicone levels. Although widely implemented in industry, still little is known and published on the effect of the bake-on process on the silicone level, layer thickness and chemical composition. In this study, cartridges were bake-on siliconized in a heat-tunnel by varying both temperature from 200 to 350°C for 12min and time from 5min to 3h at 316°C. Furthermore, a heat-oven with air-exchange was established as an experimental model. Heat treatment led to a time- and temperature-dependent decrease in the silicone level and layer thickness. After 1h at 316°C lubrication was insufficient. The silicone levels substantially decreased between 250 and 316°C after 12min. After bake-on, the peak molecular weight of the silicone remained unchanged while fractions below 5000g/mol were removed at 316 and 350°C. Cyclic low molecular weight siloxanes below 500g/mol were volatilized under all conditions. Despite most of the baked-on silicone was solvent-extractable, contact angle analysis indicated a strong binding of a remaining, thin silicone film to the glass surface. Copyright © 2016 Elsevier B.V. All rights reserved.

45 CFR 160.316 - Refraining from intimidation or retaliation.

Code of Federal Regulations, 2014 CFR

2014-10-01

... reasonable and does not involve a disclosure of protected health information in violation of subpart E of... 45 Public Welfare 1 2014-10-01 2014-10-01 false Refraining from intimidation or retaliation. 160.316 Section 160.316 Public Welfare Department of Health and Human Services ADMINISTRATIVE DATA...

45 CFR 160.316 - Refraining from intimidation or retaliation.

Code of Federal Regulations, 2013 CFR

2013-10-01

... reasonable and does not involve a disclosure of protected health information in violation of subpart E of... 45 Public Welfare 1 2013-10-01 2013-10-01 false Refraining from intimidation or retaliation. 160.316 Section 160.316 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES ADMINISTRATIVE DATA...

16 CFR 316.2 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... or general partnership, corporation, or other business entity. (i) The definition of the term... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Definitions. 316.2 Section 316.2 Commercial... Definitions. (a) The definition of the term “affirmative consent” is the same as the definition of that term...

42 CFR 433.316 - When discovery of overpayment occurs and its significance.

Code of Federal Regulations, 2010 CFR

2010-10-01

... significance. 433.316 Section 433.316 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL ASSISTANCE PROGRAMS STATE FISCAL ADMINISTRATION Refunding... amount that is subject to recovery; (2) The date on which a provider initially acknowledges a specific...

31 CFR 595.316 - U.S. financial institution.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 31 Money and Finance:Treasury 3 2013-07-01 2013-07-01 false U.S. financial institution. 595.316 Section 595.316 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE..., commodity futures or options, or procuring purchasers and sellers thereof, as principal or agent; including...

31 CFR 595.316 - U.S. financial institution.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 31 Money and Finance:Treasury 3 2014-07-01 2014-07-01 false U.S. financial institution. 595.316 Section 595.316 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE..., commodity futures or options, or procuring purchasers and sellers thereof, as principal or agent; including...

31 CFR 538.316 - U.S. financial institution.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 31 Money and Finance:Treasury 3 2011-07-01 2011-07-01 false U.S. financial institution. 538.316 Section 538.316 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE..., commodity futures or options, or procuring purchasers and sellers thereof, as principal or agent; including...

31 CFR 595.316 - U.S. financial institution.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false U.S. financial institution. 595.316 Section 595.316 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE..., commodity futures or options, or procuring purchasers and sellers thereof, as principal or agent; including...

31 CFR 538.316 - U.S. financial institution.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 31 Money and Finance:Treasury 3 2012-07-01 2012-07-01 false U.S. financial institution. 538.316 Section 538.316 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE..., commodity futures or options, or procuring purchasers and sellers thereof, as principal or agent; including...

31 CFR 538.316 - U.S. financial institution.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 31 Money and Finance:Treasury 3 2013-07-01 2013-07-01 false U.S. financial institution. 538.316 Section 538.316 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE..., commodity futures or options, or procuring purchasers and sellers thereof, as principal or agent; including...

31 CFR 595.316 - U.S. financial institution.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 31 Money and Finance:Treasury 3 2011-07-01 2011-07-01 false U.S. financial institution. 595.316 Section 595.316 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE..., commodity futures or options, or procuring purchasers and sellers thereof, as principal or agent; including...

31 CFR 595.316 - U.S. financial institution.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 31 Money and Finance:Treasury 3 2012-07-01 2012-07-01 false U.S. financial institution. 595.316 Section 595.316 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE..., commodity futures or options, or procuring purchasers and sellers thereof, as principal or agent; including...

31 CFR 538.316 - U.S. financial institution.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false U.S. financial institution. 538.316 Section 538.316 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE..., commodity futures or options, or procuring purchasers and sellers thereof, as principal or agent; including...

31 CFR 538.316 - U.S. financial institution.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 31 Money and Finance:Treasury 3 2014-07-01 2014-07-01 false U.S. financial institution. 538.316 Section 538.316 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE..., commodity futures or options, or procuring purchasers and sellers thereof, as principal or agent; including...

20 CFR 726.316 - Filing and service.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 20 Employees' Benefits 3 2011-04-01 2011-04-01 false Filing and service. 726.316 Section 726.316 Employees' Benefits OFFICE OF WORKERS' COMPENSATION PROGRAMS, DEPARTMENT OF LABOR FEDERAL COAL MINE HEALTH... Secretary shall be filed with the Secretary of Labor, U.S. Department of Labor, 200 Constitution Ave., N.W...

20 CFR 726.316 - Filing and service.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 20 Employees' Benefits 4 2012-04-01 2012-04-01 false Filing and service. 726.316 Section 726.316 Employees' Benefits OFFICE OF WORKERS' COMPENSATION PROGRAMS, DEPARTMENT OF LABOR FEDERAL COAL MINE HEALTH... Secretary shall be filed with the Secretary of Labor, U.S. Department of Labor, 200 Constitution Ave., N.W...

45 CFR 160.316 - Refraining from intimidation or retaliation.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 45 Public Welfare 1 2010-10-01 2010-10-01 false Refraining from intimidation or retaliation. 160.316 Section 160.316 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES ADMINISTRATIVE DATA... made unlawful by this subchapter, provided the individual or person has a good faith belief that the...

45 CFR 160.316 - Refraining from intimidation or retaliation.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 45 Public Welfare 1 2012-10-01 2012-10-01 false Refraining from intimidation or retaliation. 160.316 Section 160.316 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES ADMINISTRATIVE DATA... made unlawful by this subchapter, provided the individual or person has a good faith belief that the...

45 CFR 160.316 - Refraining from intimidation or retaliation.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 45 Public Welfare 1 2011-10-01 2011-10-01 false Refraining from intimidation or retaliation. 160.316 Section 160.316 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES ADMINISTRATIVE DATA... made unlawful by this subchapter, provided the individual or person has a good faith belief that the...

49 CFR 173.316 - Cryogenic liquids in cylinders.

Code of Federal Regulations, 2011 CFR

2011-10-01

... filling density for hydrogen, cryogenic liquid is defined as the percent ratio of the weight of lading in... 49 Transportation 2 2011-10-01 2011-10-01 false Cryogenic liquids in cylinders. 173.316 Section... REQUIREMENTS FOR SHIPMENTS AND PACKAGINGS Gases; Preparation and Packaging § 173.316 Cryogenic liquids in...

42 CFR 412.316 - Geographic adjustment factors.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 2 2010-10-01 2010-10-01 false Geographic adjustment factors. 412.316 Section 412... Costs § 412.316 Geographic adjustment factors. (a) Local cost variation. CMS adjusts for local cost... part. The adjustment factor equals the hospital wage index value applicable to the hospital raised to...

31 CFR 316.3 - Governing regulations.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 31 Money and Finance:Treasury 2 2011-07-01 2011-07-01 false Governing regulations. 316.3 Section 316.3 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) FISCAL SERVICE....3 Governing regulations. (a) The regulations in 31 CFR part 315 apply to definitive Series E bonds...

49 CFR 173.316 - Cryogenic liquids in cylinders.

Code of Federal Regulations, 2010 CFR

2010-10-01

... °F.). (2) The cryogenic liquids of argon, nitrogen, oxygen, helium and neon must be loaded and... 49 Transportation 2 2010-10-01 2010-10-01 false Cryogenic liquids in cylinders. 173.316 Section... REQUIREMENTS FOR SHIPMENTS AND PACKAGINGS Gases; Preparation and Packaging § 173.316 Cryogenic liquids in...

21 CFR 316.10 - Content and format of a request for written recommendations.

Code of Federal Regulations, 2011 CFR

2011-04-01

... its recommendations for nonclinical laboratory studies and clinical investigations. [57 FR 62085, Dec... recommendations. 316.10 Section 316.10 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) DRUGS FOR HUMAN USE ORPHAN DRUGS Written Recommendations for Investigations of Orphan...

8 CFR 316.5 - Residence in the United States.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 8 Aliens and Nationality 1 2014-01-01 2014-01-01 false Residence in the United States. 316.5 Section 316.5 Aliens and Nationality DEPARTMENT OF HOMELAND SECURITY NATIONALITY REGULATIONS GENERAL... location of the residence of the applicant's spouse and/or minor child(ren); or (iii) The applicant's home...

8 CFR 316.5 - Residence in the United States.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 8 Aliens and Nationality 1 2010-01-01 2010-01-01 false Residence in the United States. 316.5 Section 316.5 Aliens and Nationality DEPARTMENT OF HOMELAND SECURITY NATIONALITY REGULATIONS GENERAL... location of the residence of the applicant's spouse and/or minor child(ren); or (iii) The applicant's home...

8 CFR 316.5 - Residence in the United States.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 8 Aliens and Nationality 1 2013-01-01 2013-01-01 false Residence in the United States. 316.5 Section 316.5 Aliens and Nationality DEPARTMENT OF HOMELAND SECURITY NATIONALITY REGULATIONS GENERAL... location of the residence of the applicant's spouse and/or minor child(ren); or (iii) The applicant's home...

8 CFR 316.5 - Residence in the United States.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 8 Aliens and Nationality 1 2011-01-01 2011-01-01 false Residence in the United States. 316.5 Section 316.5 Aliens and Nationality DEPARTMENT OF HOMELAND SECURITY NATIONALITY REGULATIONS GENERAL... location of the residence of the applicant's spouse and/or minor child(ren); or (iii) The applicant's home...

8 CFR 316.5 - Residence in the United States.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 8 Aliens and Nationality 1 2012-01-01 2012-01-01 false Residence in the United States. 316.5 Section 316.5 Aliens and Nationality DEPARTMENT OF HOMELAND SECURITY NATIONALITY REGULATIONS GENERAL... location of the residence of the applicant's spouse and/or minor child(ren); or (iii) The applicant's home...

49 CFR 173.316 - Cryogenic liquids in cylinders.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 2 2013-10-01 2013-10-01 false Cryogenic liquids in cylinders. 173.316 Section... REQUIREMENTS FOR SHIPMENTS AND PACKAGINGS Gases; Preparation and Packaging § 173.316 Cryogenic liquids in cylinders. (a) General requirements. (1) A cylinder may not be loaded with a cryogenic liquid colder than...

49 CFR 173.316 - Cryogenic liquids in cylinders.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 2 2014-10-01 2014-10-01 false Cryogenic liquids in cylinders. 173.316 Section... REQUIREMENTS FOR SHIPMENTS AND PACKAGINGS Gases; Preparation and Packaging § 173.316 Cryogenic liquids in cylinders. (a) General requirements. (1) A cylinder may not be loaded with a cryogenic liquid colder than...

21 CFR 316.22 - Permanent-resident agent for foreign sponsor.

Code of Federal Regulations, 2010 CFR

2010-04-01

....22 Section 316.22 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) DRUGS FOR HUMAN USE ORPHAN DRUGS Designation of an Orphan Drug § 316.22 Permanent..., orders, decisions, requirements, and other communications may be made on behalf of the sponsor...

31 CFR 316.9 - Taxation.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 31 Money and Finance: Treasury 2 2010-07-01 2010-07-01 false Taxation. 316.9 Section 316.9 Money... Taxation. (a) General. For the purpose of determining taxes and tax exemptions, the increment in value..., whether Federal or State, but are exempt from all other taxation now or hereafter imposed on the principal...

31 CFR 316.6 - Purchase of bonds.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 31 Money and Finance:Treasury 2 2012-07-01 2012-07-01 false Purchase of bonds. 316.6 Section 316.6 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) FISCAL SERVICE..., including personal checks, was accepted, subject to collection. Checks or other forms of exchange were to be...

40 CFR 761.316 - Interpreting PCB concentration measurements resulting from this sampling scheme.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 32 2013-07-01 2013-07-01 false Interpreting PCB concentration measurements resulting from this sampling scheme. 761.316 Section 761.316 Protection of Environment... scheme. (a) For an individual sample taken from an approximately 1 meter square portion of the entire...

31 CFR 316.9 - Taxation.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 31 Money and Finance:Treasury 2 2011-07-01 2011-07-01 false Taxation. 316.9 Section 316.9 Money... Taxation. (a) General. For the purpose of determining taxes and tax exemptions, the increment in value..., whether Federal or State, but are exempt from all other taxation now or hereafter imposed on the principal...

To make the antitrust laws applicable to a political committee under the Federal Election Campaign Act of 1971 which is established and administered by a separate segregated fund of a corporation pursuant to section 316(b)(2)(C) of such Act.

THOMAS, 113th Congress

Rep. Grayson, Alan [D-FL-9

2013-03-13

House - 04/08/2013 Referred to the Subcommittee on Regulatory Reform, Commercial And Antitrust Law. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

42 CFR 57.316 - What additional Department regulations apply to schools?

Code of Federal Regulations, 2010 CFR

2010-10-01

... assistance through the Department of Health and Human Services effectuation of title VI of the Civil Rights... 42 Public Health 1 2010-10-01 2010-10-01 false What additional Department regulations apply to schools? 57.316 Section 57.316 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN...

42 CFR 57.316 - What additional Department regulations apply to schools?

Code of Federal Regulations, 2014 CFR

2014-10-01

... assistance through the Department of Health and Human Services effectuation of title VI of the Civil Rights... 42 Public Health 1 2014-10-01 2014-10-01 false What additional Department regulations apply to schools? 57.316 Section 57.316 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN...

42 CFR 57.316 - What additional Department regulations apply to schools?

Code of Federal Regulations, 2012 CFR

2012-10-01

... assistance through the Department of Health and Human Services effectuation of title VI of the Civil Rights... 42 Public Health 1 2012-10-01 2012-10-01 false What additional Department regulations apply to schools? 57.316 Section 57.316 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN...

42 CFR 57.316 - What additional Department regulations apply to schools?

Code of Federal Regulations, 2011 CFR

2011-10-01

... assistance through the Department of Health and Human Services effectuation of title VI of the Civil Rights... 42 Public Health 1 2011-10-01 2011-10-01 false What additional Department regulations apply to schools? 57.316 Section 57.316 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN...

42 CFR 57.316 - What additional Department regulations apply to schools?

Code of Federal Regulations, 2013 CFR

2013-10-01

... assistance through the Department of Health and Human Services effectuation of title VI of the Civil Rights... 42 Public Health 1 2013-10-01 2013-10-01 false What additional Department regulations apply to schools? 57.316 Section 57.316 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN...

9 CFR 316.8 - Unmarked inspected products; moved between official establishments; moved in commerce.

Code of Federal Regulations, 2014 CFR

2014-01-01

... between official establishments; moved in commerce. 316.8 Section 316.8 Animals and Animal Products FOOD... commerce. (a) Unmarked products which have been inspected and passed but do not bear the official... from such closed container the product may not be further transported in commerce unless such removal...

9 CFR 316.8 - Unmarked inspected products; moved between official establishments; moved in commerce.

Code of Federal Regulations, 2012 CFR

2012-01-01

... between official establishments; moved in commerce. 316.8 Section 316.8 Animals and Animal Products FOOD... commerce. (a) Unmarked products which have been inspected and passed but do not bear the official... from such closed container the product may not be further transported in commerce unless such removal...

9 CFR 316.8 - Unmarked inspected products; moved between official establishments; moved in commerce.

Code of Federal Regulations, 2013 CFR

2013-01-01

... between official establishments; moved in commerce. 316.8 Section 316.8 Animals and Animal Products FOOD... commerce. (a) Unmarked products which have been inspected and passed but do not bear the official... from such closed container the product may not be further transported in commerce unless such removal...

21 CFR 316.28 - Publication of orphan-drug designations.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 21 Food and Drugs 5 2010-04-01 2010-04-01 false Publication of orphan-drug designations. 316.28 Section 316.28 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES... placed on file at the FDA Division of Dockets Management, and will contain the following information: (a...

25 CFR 166.316 - Can a permittee construct improvements on permitted Indian land?

Code of Federal Regulations, 2010 CFR

2010-04-01

... 25 Indians 1 2010-04-01 2010-04-01 false Can a permittee construct improvements on permitted Indian land? 166.316 Section 166.316 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR LAND AND WATER GRAZING PERMITS Land and Operations Management Conservation Practices and Improvements § 166...

8 CFR 316.11 - Attachment to the Constitution; favorable disposition towards the good order and happiness.

Code of Federal Regulations, 2010 CFR

2010-01-01

... disposition towards the good order and happiness. 316.11 Section 316.11 Aliens and Nationality DEPARTMENT OF... the Constitution; favorable disposition towards the good order and happiness. (a) General. An... favorably disposed toward the good order and happiness of the United States. Attachment implies a depth of...

8 CFR 316.11 - Attachment to the Constitution; favorable disposition towards the good order and happiness.

Code of Federal Regulations, 2011 CFR

2011-01-01

... disposition towards the good order and happiness. 316.11 Section 316.11 Aliens and Nationality DEPARTMENT OF... the Constitution; favorable disposition towards the good order and happiness. (a) General. An... favorably disposed toward the good order and happiness of the United States. Attachment implies a depth of...

8 CFR 316.11 - Attachment to the Constitution; favorable disposition towards the good order and happiness.

Code of Federal Regulations, 2014 CFR

2014-01-01

... disposition towards the good order and happiness. 316.11 Section 316.11 Aliens and Nationality DEPARTMENT OF... the Constitution; favorable disposition towards the good order and happiness. (a) General. An... favorably disposed toward the good order and happiness of the United States. Attachment implies a depth of...

8 CFR 316.11 - Attachment to the Constitution; favorable disposition towards the good order and happiness.

Code of Federal Regulations, 2012 CFR

2012-01-01

... disposition towards the good order and happiness. 316.11 Section 316.11 Aliens and Nationality DEPARTMENT OF... the Constitution; favorable disposition towards the good order and happiness. (a) General. An... favorably disposed toward the good order and happiness of the United States. Attachment implies a depth of...

8 CFR 316.11 - Attachment to the Constitution; favorable disposition towards the good order and happiness.

Code of Federal Regulations, 2013 CFR

2013-01-01

... disposition towards the good order and happiness. 316.11 Section 316.11 Aliens and Nationality DEPARTMENT OF... the Constitution; favorable disposition towards the good order and happiness. (a) General. An... favorably disposed toward the good order and happiness of the United States. Attachment implies a depth of...

31 CFR 316.11 - Reservation as to issue of bonds.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 31 Money and Finance: Treasury 2 2010-07-01 2010-07-01 false Reservation as to issue of bonds. 316.11 Section 316.11 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) FISCAL SERVICE, DEPARTMENT OF THE TREASURY BUREAU OF THE PUBLIC DEBT OFFERING OF UNITED STATES SAVINGS...

16 CFR 316.2 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-01-01

... definition of the term “protected computer” is the same as the definition of that term in the CAN-SPAM Act... 16 Commercial Practices 1 2014-01-01 2014-01-01 false Definitions. 316.2 Section 316.2 Commercial... Definitions. (a) The definition of the term “affirmative consent” is the same as the definition of that term...

16 CFR 316.2 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-01-01

... definition of the term “protected computer” is the same as the definition of that term in the CAN-SPAM Act... 16 Commercial Practices 1 2013-01-01 2013-01-01 false Definitions. 316.2 Section 316.2 Commercial... Definitions. (a) The definition of the term “affirmative consent” is the same as the definition of that term...

16 CFR 316.2 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-01-01

... definition of the term “protected computer” is the same as the definition of that term in the CAN-SPAM Act... 16 Commercial Practices 1 2012-01-01 2012-01-01 false Definitions. 316.2 Section 316.2 Commercial... Definitions. (a) The definition of the term “affirmative consent” is the same as the definition of that term...

16 CFR 316.2 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-01-01

... definition of the term “protected computer” is the same as the definition of that term in the CAN-SPAM Act... 16 Commercial Practices 1 2011-01-01 2011-01-01 false Definitions. 316.2 Section 316.2 Commercial... Definitions. (a) The definition of the term “affirmative consent” is the same as the definition of that term...

31 CFR 536.316 - United States person; U.S. person.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 31 Money and Finance:Treasury 3 2014-07-01 2014-07-01 false United States person; U.S. person. 536.316 Section 536.316 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued... laws of the United States or any jurisdiction within the United States (including foreign branches); or...

31 CFR 536.316 - United States person; U.S. person.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 31 Money and Finance:Treasury 3 2013-07-01 2013-07-01 false United States person; U.S. person. 536.316 Section 536.316 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued... laws of the United States or any jurisdiction within the United States (including foreign branches); or...

31 CFR 536.316 - United States person; U.S. person.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 31 Money and Finance:Treasury 3 2011-07-01 2011-07-01 false United States person; U.S. person. 536.316 Section 536.316 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued... laws of the United States or any jurisdiction within the United States (including foreign branches); or...

31 CFR 536.316 - United States person; U.S. person.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false United States person; U.S. person. 536.316 Section 536.316 Money and Finance: Treasury Regulations Relating to Money and Finance... under the laws of the United States or any jurisdiction within the United States (including foreign...

21 CFR 316.26 - Amendment to orphan-drug designation.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 21 Food and Drugs 5 2010-04-01 2010-04-01 false Amendment to orphan-drug designation. 316.26 Section 316.26 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES... designation. (a) At any time prior to approval of a marketing application for a designated orphan drug, the...

9 CFR 316.1 - Authorization required to make devices bearing official marks.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Authorization required to make devices bearing official marks. 316.1 Section 316.1 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE... required to make devices bearing official marks. No brand manufacturer, printer or other person shall cast...

49 CFR 31.6 - Prerequisites for issuing a complaint.

Code of Federal Regulations, 2010 CFR

2010-10-01

... of money or the value of property or services demanded or requested in violation of § 31.3(a) does..., regardless of the amount of money, or the value of property or services, demanded or requested. ... Section 31.6 Transportation Office of the Secretary of Transportation PROGRAM FRAUD CIVIL REMEDIES § 31.6...

9 CFR 316.12 - Marking of equine carcasses and parts thereof.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Marking of equine carcasses and parts thereof. 316.12 Section 316.12 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT... equine carcasses and parts thereof. (a) All inspected and passed equine carcasses and parts thereof...

9 CFR 316.9 - Products to be marked with official marks.

Code of Federal Regulations, 2010 CFR

2010-01-01

... marks. 316.9 Section 316.9 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF... liver, beef tongue, and beef heart which has been inspected and passed shall be marked with the official... round, flank, loin, rib, plate, brisket, chuck, and shank are primal parts of beef carcasses. Veal...

9 CFR 316.9 - Products to be marked with official marks.

Code of Federal Regulations, 2012 CFR

2012-01-01

... marks. 316.9 Section 316.9 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF... liver, beef tongue, and beef heart which has been inspected and passed shall be marked with the official... round, flank, loin, rib, plate, brisket, chuck, and shank are primal parts of beef carcasses. Veal...

9 CFR 316.9 - Products to be marked with official marks.

Code of Federal Regulations, 2011 CFR

2011-01-01

... marks. 316.9 Section 316.9 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF... liver, beef tongue, and beef heart which has been inspected and passed shall be marked with the official... round, flank, loin, rib, plate, brisket, chuck, and shank are primal parts of beef carcasses. Veal...

9 CFR 316.9 - Products to be marked with official marks.

Code of Federal Regulations, 2014 CFR

2014-01-01

... marks. 316.9 Section 316.9 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF... liver, beef tongue, and beef heart which has been inspected and passed shall be marked with the official... round, flank, loin, rib, plate, brisket, chuck, and shank are primal parts of beef carcasses. Veal...

9 CFR 316.9 - Products to be marked with official marks.

Code of Federal Regulations, 2013 CFR

2013-01-01

... marks. 316.9 Section 316.9 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF... liver, beef tongue, and beef heart which has been inspected and passed shall be marked with the official... round, flank, loin, rib, plate, brisket, chuck, and shank are primal parts of beef carcasses. Veal...

20 CFR 404.316 - When entitlement to disability benefits begins and ends.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 20 Employees' Benefits 2 2010-04-01 2010-04-01 false When entitlement to disability benefits begins and ends. 404.316 Section 404.316 Employees' Benefits SOCIAL SECURITY ADMINISTRATION FEDERAL OLD-AGE, SURVIVORS AND DISABILITY INSURANCE (1950- ) Old-Age, Disability, Dependents' and Survivors' Insurance Benefits; Period of Disability Old-Age and...

45 CFR 164.316 - Policies and procedures and documentation requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Electronic Protected Health Information § 164.316 Policies and procedures and documentation requirements. A... reasonable and appropriate policies and procedures to comply with the standards, implementation... 45 Public Welfare 1 2010-10-01 2010-10-01 false Policies and procedures and documentation...

45 CFR 164.316 - Policies and procedures and documentation requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Electronic Protected Health Information § 164.316 Policies and procedures and documentation requirements. A... reasonable and appropriate policies and procedures to comply with the standards, implementation... 45 Public Welfare 1 2011-10-01 2011-10-01 false Policies and procedures and documentation...

9 CFR 316.8 - Unmarked inspected products; moved between official establishments; moved in commerce.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Unmarked inspected products; moved between official establishments; moved in commerce. 316.8 Section 316.8 Animals and Animal Products FOOD... closed container, if the railroad car, truck, or container is sealed with an official seal of the...

9 CFR 316.4 - Marking devices; to be furnished by official establishments; control of.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Marking devices; to be furnished by official establishments; control of. 316.4 Section 316.4 Animals and Animal Products FOOD SAFETY AND... seals, shall be used only under supervision of a Program employee, and, when not in use for marking...

9 CFR 316.8 - Unmarked inspected products; moved between official establishments; moved in commerce.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 9 Animals and Animal Products 2 2011-01-01 2011-01-01 false Unmarked inspected products; moved between official establishments; moved in commerce. 316.8 Section 316.8 Animals and Animal Products FOOD... closed container, if the railroad car, truck, or container is sealed with an official seal of the...

9 CFR 316.4 - Marking devices; to be furnished by official establishments; control of.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 9 Animals and Animal Products 2 2011-01-01 2011-01-01 false Marking devices; to be furnished by official establishments; control of. 316.4 Section 316.4 Animals and Animal Products FOOD SAFETY AND... seals, shall be used only under supervision of a Program employee, and, when not in use for marking...

9 CFR 316.11 - Special markings for certain meat food products.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 9 Animals and Animal Products 2 2014-01-01 2014-01-01 false Special markings for certain meat food products. 316.11 Section 316.11 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT... markings for certain meat food products. (a) Meat food products prepared in casing or link form (whether or...

9 CFR 316.11 - Special markings for certain meat food products.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 9 Animals and Animal Products 2 2012-01-01 2012-01-01 false Special markings for certain meat food products. 316.11 Section 316.11 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT... markings for certain meat food products. (a) Meat food products prepared in casing or link form (whether or...

9 CFR 316.11 - Special markings for certain meat food products.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Special markings for certain meat food products. 316.11 Section 316.11 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT... markings for certain meat food products. (a) Meat food products prepared in casing or link form (whether or...

9 CFR 316.11 - Special markings for certain meat food products.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 9 Animals and Animal Products 2 2013-01-01 2013-01-01 false Special markings for certain meat food products. 316.11 Section 316.11 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT... markings for certain meat food products. (a) Meat food products prepared in casing or link form (whether or...

9 CFR 316.11 - Special markings for certain meat food products.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 9 Animals and Animal Products 2 2011-01-01 2011-01-01 false Special markings for certain meat food products. 316.11 Section 316.11 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT... markings for certain meat food products. (a) Meat food products prepared in casing or link form (whether or...

Effect of a beta-3 agonist on food intake in two strains of rats that differ in susceptibility to obesity.

PubMed

White, Christy L; Ishihara, Yuri; Dotson, Travis L; Hughes, David A; Bray, George A; York, David A

2004-09-15

Beta-3 agonists acutely reduce food intake, but the mechanism is not well understood. To evaluate the effect of a beta3 agonist on food intake in two strains of rats that differ in their sensitivity to becoming obese while eating a high-fat (HF) diet. Male Osborne-Mendel (OM) and S5B/Pl (S5B) rats were treated with a beta3-adrenergic agonist (CL 316,243) at 8 weeks of age, after an adaptation to either an HF (56% fat energy) or a low-fat (LF; 10% fat energy) diet that was equicaloric for protein (24% energy). Ad-lib-fed rats were injected intraperitoneally with CL 316,243, at doses of 0.03, 0.1, 0.3, 1.0 or 3.0 mg/kg, or with vehicle at the beginning of the dark cycle. Food intake was measured at 1, 3, 6 and 24 h after injections. The beta3 agonist CL 316,243 significantly decreased food intake at all timepoints in both strains of rats eating both diets. However, this inhibition of food intake was significantly greater in the S5B rat. CL 316,243 significantly decreased serum leptin and serum glucose in both the OM and the S5B rats, and again, the inhibition was greater in the S5B rat. Whereas CL 316,243 increased serum insulin levels in the OM rat, it decreased them in the S5B rat on an LF diet. In a second experiment, chow-fed rats were implanted with vascular ports into the jugular vein and allowed to recover. When CL 316,243 was injected into the animals that were fasted overnight, rats of both strains significantly increased their serum insulin at 30 min, but the increase was much more pronounced in the S5B rat. Serum glucose was decreased significantly at both the 30- and 60-min timepoints in the OM rat and at 30 min in the S5B rat. These experiments demonstrate that a beta3 agonist (CL 316,243) has a much greater effect in a strain of rats that resist fat-induced obesity.

75 FR 9964 - Order Making Fiscal Year 2010 Mid-Year Adjustment to the Fee Rates Applicable Under Sections 31(b...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-04

... Dec-02 21 1,561,092,215,646 74,337,724,555 -0.180 Jan-03 21 1,723,698,830,414 82,080,896,686 0.099 Feb...,113,357,316 181,596,061,696 -0.052 Jul-06 20 3,339,658,009,357 166,982,900,468 -0.084 Aug-06 23 3,410...

24 CFR 982.316 - Live-in aide.

Code of Federal Regulations, 2010 CFR

2010-04-01

... withdraw such approval, if: (1) The person commits fraud, bribery or any other corrupt or criminal act in... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false Live-in aide. 982.316 Section 982... connection with Section 8 or public housing assistance under the 1937 Act. [63 FR 23860, Apr. 30, 1998; 63 FR...

77 FR 3922 - Rules for Investigations Relating to Global and Bilateral Safeguards Actions, Market Disruption...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-26

... Agreement Implementation Act, section 311(b) of the United States-Colombia Trade Promotion Agreement... Trade Agreement Implementation Act, section 311(b) of the United States-Panama Trade Promotion Agreement Implementation Act, section 311(b) of the United States-Peru Trade Promotion Agreement Implementation Act, and...

75 FR 4482 - Airworthiness Directives; Eurocopter France Model SE3160, SA315B, SA316B, SA316C, and SA319B...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-28

... spar by using calipers held against the face of the No. 1 spar in alignment with the through pins. [cir... using calipers held against the face of the No. 1 spar in alignment with the through pins as depicted in..., either a crack, an elongated through pinhole, movement of a through pin, or a through pin that is not...

Annealing effect on microstructural recovery in 316L and A533B

NASA Astrophysics Data System (ADS)

Hashimoto, N.; Goto, S.; Inoue, S.; Suzuki, E.

2017-11-01

An austenitic model alloy (316L) and a low alloy steel (A533B) were exposed to constant or fluctuating temperature after electron irradiation to a cumulative damage level of 1 displacement per atom. 316L model alloy was exposed to LWR operating temperature during electron irradiation, and were exposed to a higher temperature at a high heating and cooling rates. The annealing experiment after irradiation to 316L resulted in the change in irradiation-induced microstructure; both the size and the number density of Frank loop and black dots were decreased, while the volume fraction of void was increased. In the case of A533B, the aging experiment after electron irradiation resulted in the shrinkage or the disappearance of black dots and the growth of dislocation loops. It is suggested that during annealing and/or aging at a high temperature the excess vacancies could be provided and flew into each defect feature, resulting in that interstitial type feature could be diminished, while vacancy type increased in volume fraction if exists.

Enhancement of cavitation erosion resistance of 316 L stainless steel by adding molybdenum.

PubMed

Li, D G; Chen, D R; Liang, P

2017-03-01

The influence of Mo on ultrasonic cavitation erosion of 316 L stainless steel in 3.5% NaCl solution were investigated using an ultrasonic cavitation erosion (CE) facility. The morphologies of specimen after cavitation erosion were observed by scanning electron microscopy (SEM). The results showed that the addition of Mo can sharply decrease the mean depth of erosion (MDE) of 316 L SS, implying the increased resistance of cavitation erosion. In order to better understanding the influence of Mo on the cavitation erosion of 316 L SS, the semi-conductive property of passive films on 316 L SS containing different concentrations of Mo were studied by Mott-Schottky plot. Based on Mott-Schottky results and semiconductor physics, a physical model was proposed to explain the effect mechanism of Mo on cavitation erosion of 316 L SS. Copyright © 2016 Elsevier B.V. All rights reserved.

40 CFR 60.316 - Test methods and procedures.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Section 60.316 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS... for the measurement of VOC concentration. (3) Method 1 for sample and velocity traverses. (4) Method 2... smaller volumes, when necessitated by process variables or other factors, may be approved by the...

48 CFR 316.505 - Ordering.

Code of Federal Regulations, 2010 CFR

2010-10-01

... CONTRACT TYPES TYPES OF CONTRACTS Indefinite-Delivery Contracts 316.505 Ordering. (b)(5) The HHS task-order and delivery-order ombudsman is the Director, Strategic Acquisition Service, PSC. The task-order and... of Performance Accountability, Resources and Technology ASPR/OAMCG: Chief of Acquisition Policy CDC...

Evaluation of the soft tissue biocompatibility of MgCa0.8 and surgical steel 316L in vivo: a comparative study in rabbits

PubMed Central

2010-01-01

Background Recent studies have shown the potential suitability of magnesium alloys as biodegradable implants. The aim of the present study was to compare the soft tissue biocompatibility of MgCa0.8 and commonly used surgical steel in vivo. Methods A biodegradable magnesium calcium alloy (MgCa0.8) and surgical steel (S316L), as a control, were investigated. Screws of identical geometrical conformation were implanted into the tibiae of 40 rabbits for a postoperative follow up of two, four, six and eight weeks. The tibialis cranialis muscle was in direct vicinity of the screw head and thus embedded in paraffin and histologically and immunohistochemically assessed. Haematoxylin and eosin staining was performed to identify macrophages, giant cells and heterophil granulocytes as well as the extent of tissue fibrosis and necrosis. Mouse anti-CD79α and rat anti-CD3 monoclonal primary antibodies were used for B- and T-lymphocyte detection. Evaluation of all sections was performed by applying a semi-quantitative score. Results Clinically, both implant materials were tolerated well. Histology revealed that a layer of fibrous tissue had formed between implant and overlying muscle in MgCa0.8 and S316L, which was demarcated by a layer of synoviocyte-like cells at its interface to the implant. In MgCa0.8 implants cavities were detected within the fibrous tissue, which were surrounded by the same kind of cell type. The thickness of the fibrous layer and the amount of tissue necrosis and cellular infiltrations gradually decreased in S316L. In contrast, a decrease could only be noted in the first weeks of implantation in MgCa0.8, whereas parameters were increasing again at the end of the observation period. B-lymphocytes were found more often in MgCa0.8 indicating humoral immunity and the presence of soluble antigens. Conversely, S316L displayed a higher quantity of T-lymphocytes. Conclusions Moderate inflammation was detected in both implant materials and resolved to a minimum during the first weeks indicating comparable biocompatibility for MgCa0.8 and S316L. Thus, the application of MgCa0.8 as biodegradable implant material seems conceivable. Since the inflammatory parameters were re-increasing at the end of the observation period in MgCa0.8 it is important to observe the development of inflammation over a longer time period in addition to the present study. PMID:20974008

32 CFR 316.8 - Exemptions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... INFORMATION SYSTEMS AGENCY PRIVACY PROGRAM § 316.8 Exemptions. Section 5 U.S.C. 552a (3)(j) and (3)(k) authorize an agency head to exempt certain systems of records or parts of certain systems of records from...)(1) to the extent that the system contains any information properly classified under Executive Order...

9 CFR 316.13 - Marking of outside containers.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Section 316.13 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE... beef which has been inspected and passed for refrigeration shall bear the markings and tag prescribed... for human food purposes, such as those described in § 325.19 of this subchapter, shall be plainly...

9 CFR 316.13 - Marking of outside containers.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Section 316.13 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE... beef which has been inspected and passed for refrigeration shall bear the markings and tag prescribed... for human food purposes, such as those described in § 325.19 of this subchapter, shall be plainly...

9 CFR 316.13 - Marking of outside containers.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Section 316.13 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE... beef which has been inspected and passed for refrigeration shall bear the markings and tag prescribed... for human food purposes, such as those described in § 325.19 of this subchapter, shall be plainly...

9 CFR 316.13 - Marking of outside containers.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Section 316.13 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE... beef which has been inspected and passed for refrigeration shall bear the markings and tag prescribed... for human food purposes, such as those described in § 325.19 of this subchapter, shall be plainly...

9 CFR 316.13 - Marking of outside containers.

Code of Federal Regulations, 2013 CFR

2013-01-01

... Section 316.13 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE... beef which has been inspected and passed for refrigeration shall bear the markings and tag prescribed... for human food purposes, such as those described in § 325.19 of this subchapter, shall be plainly...

Review of Chemical, Biological, Radiological, and Nuclear (CBRN) Terminology in Technical Guide 316 (TG 316) and Allied Medical Publication 8(C) (AMedP-8(C))

DTIC Science & Technology

2013-05-01

tularensis causing pneumonic tularemia (Aberdeen Proving Ground, MD: USAPHC, January 2012); USAPHC, Technical Guide 316 Supplement F1; USAPHC, Technical...Phase I preliminary BMEGs are completed for anthrax, plague, tularemia , ricin, and Staphylococcal Enterotoxin B (SEB). The Phase II process has been...Exposure to Specified Biological Agents: Brucellosis, Glanders, Q Fever, SEB and Tularemia , IDA Document D-4132 (Alexandria, VA: Institute for Defense

75 FR 70294 - Notice of Determinations Regarding Eligibility To Apply for Worker Adjustment Assistance

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-17

... Corporation Including Express Employment Professionals. 74,111 Alstom Transportation, Hornell, NY May 14, 2009... Serv., Server Systems, IC1, Storage, Backup. 74,316A International Business Cambridge, MA......... June 10, 2009. Machines (IBM), Global Tech Serv., Server Systems, IC1, Storage, Backup. 74,316B...

31 CFR 316.2 - Description of bonds.

Code of Federal Regulations, 2014 CFR

2014-07-01

..., DEPARTMENT OF THE TREASURY BUREAU OF THE FISCAL SERVICE OFFERING OF UNITED STATES SAVINGS BONDS, SERIES E § 316.2 Description of bonds. (a) General. Definitive (paper) Series E bonds bear a facsimile of the... issued only in registered form and are nontransferable. (b) Denominations and prices. Series E bonds were...

31 CFR 316.2 - Description of bonds.

Code of Federal Regulations, 2010 CFR

2010-07-01

..., DEPARTMENT OF THE TREASURY BUREAU OF THE PUBLIC DEBT OFFERING OF UNITED STATES SAVINGS BONDS, SERIES E § 316.2 Description of bonds. (a) General. Definitive (paper) Series E bonds bear a facsimile of the... issued only in registered form and are nontransferable. (b) Denominations and prices. Series E bonds were...

31 CFR 316.2 - Description of bonds.

Code of Federal Regulations, 2013 CFR

2013-07-01

..., DEPARTMENT OF THE TREASURY BUREAU OF THE PUBLIC DEBT OFFERING OF UNITED STATES SAVINGS BONDS, SERIES E § 316.2 Description of bonds. (a) General. Definitive (paper) Series E bonds bear a facsimile of the... issued only in registered form and are nontransferable. (b) Denominations and prices. Series E bonds were...

46 CFR 308.546 - Standard optional endorsement No. 1-A, Form MA-316-A.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 8 2014-10-01 2014-10-01 false Standard optional endorsement No. 1-A, Form MA-316-A. 308.546 Section 308.546 Shipping MARITIME ADMINISTRATION, DEPARTMENT OF TRANSPORTATION EMERGENCY OPERATIONS WAR RISK INSURANCE War Risk Cargo Insurance Facultative War Risk Cargo Insurance § 308.546...

Parameter Optimization Of Natural Hydroxyapatite/SS316l Via Metal Injection Molding (MIM)

NASA Astrophysics Data System (ADS)

Mustafa, N.; Ibrahim1, M. H. I.; Amin, A. M.; Asmawi, R.

2017-01-01

Metal injection molding (MIM) are well known as a worldwide application of powder injection molding (PIM) where as applied the shaping concept and the beneficial of plastic injection molding but develops the applications to various high performance metals and alloys, plus metal matrix composites and ceramics. This study investigates the strength of green part by using stainless steel 316L/ Natural hydroxyapatite composite as a feedstock. Stainless steel 316L (SS316L) was mixed with Natural hydroxyapatite (NHAP) by adding 40 wt. % Low Density Polyethylene and 60 %wt. Palm Stearin as a binder system at 63 wt. % powder loading consist of 90 % wt. of SS316 L and 10 wt. % NHAP prepared thru critical powder volume percentage (CPVC). Taguchi method was functional as a tool in determining the optimum green strength for Metal Injection Molding (MIM) parameters. The green strength was optimized with 4 significant injection parameter such as Injection temperature (A), Mold temperature (B), Pressure (C) and Speed (D) were selected throughout screening process. An orthogonal array of L9 (3)4 was conducted. The optimum injection parameters for highest green strength were established at A1, B2, C0 and D1 and where as calculated based on Signal to Noise Ratio.

Defining "adverse environmental impact" and making paragraph 316(b) decisions: a fisheries management approach.

PubMed

Bailey, David E; Bulleit, Kristy A N

2002-05-17

The electric utility industry has developed an approach for decisionmaking that includes a definition of Adverse Environmental Impact (AEI) and an implementation process. The definition of AEI is based on lessons from fishery management science and analysis of the statutory term "adverse environmental impact" and is consistent with current natural resource management policy. The industry has proposed a definition focusing on "unacceptable risk to the population"s ability to sustain itself, to support reasonably anticipated commercial or recreational harvests, or to perform its normal ecological function." This definition focuses not on counting individual fish or eggs cropped by the various uses of a water body, but on preserving populations of aquatic organisms and their functions in the aquatic community. The definition recognizes that assessment of AEI should be site-specific and requires both a biological decision and a balancing of diverse societal values. The industry believes that the definition of AEI should be implemented in a process that will maximize the overall societal benefit of the paragraph 316(b) decision by considering the facility"s physical location, design, and operation, as well as the local biology. The approach considers effects on affected fish and shellfish populations and the benefits of any necessary best technology available (BTA) alternatives. This is accomplished through consideration of population impacts, which conversely allows consideration of the benefits of any necessary BTA modifications. This in turn allows selection of BTAs that will protect potentially affected populations in a cost-effective manner. The process also employs risk assessment with stakeholder participation, in accordance with EPA's Guidelines for Ecological Risk Assessment. The information and tools are now available to make informed decisions about site-specific impacts that will ensure protection of aquatic ecosystems and best serve the public interest.

RIME: The Recoverable Item Management Evaluator. Volume II. Section III. RIME Simulation Model Programs.

DTIC Science & Technology

1980-05-01

ve3 573U~5V * 3commovfirol?1@3ollpo 5 COROIIfTglzT@ RH T~ 41 CONNONAIDTZTAT 1 CORR601Z Io*nZ’PQ 2 CONN onkl!Z.lanal 2 COKKOIJZINIAYT RIME3T .3...16CRO/ ~8Z!55ri53S 27 C0OolzU./!L.rse/z2( isy 23CQII503fl3VoIfl30R( 103M 24I CoRKoflnevesUI/Z3CIUAISO *:25 C0KROWIX3b /xIsociigesoll 26 COMMON)lIOZ

Effect of ageing and μ-calpain markers on meat quality from Brangus steers finished on pasture.

PubMed

Mazzucco, Juliana Papaleo; Melucci, Lilia M; Villarreal, Edgardo L; Mezzadra, Carlos A; Soria, Liliana; Corva, Pablo; Motter, Mariana M; Schor, Alejandro; Miquel, María C

2010-11-01

Brangus steers (n=247) finished on pasture were used to evaluate the effects of post-mortem ageing and polymorphism CAPN1 316 and CAPN1 4751 markers on meat tenderness and objective colour measurements (CIEL*a*b*) of m. Longissimus dorsi. Ageing meat for 7 days decreased shear force (SF) by 13.7% and improved a* (8.4%) and b* (10%) compared to ageing for 1 day. No difference between 7 and 14 days of ageing was found for SF, a* and b*. However, L* increased markedly with ageing. Fitting both markers simultaneously, CAPN1 316 showed association with SF and L* and CAPN1 4751 with a* and b*. Fitting the markers individually, CAPN1 4751 affected all traits and CAPN1 316 showed association with SF and L*. Post-mortem ageing and the use of markers represent two independent and alternative tools that could be used for improving quality of meat from Brangus cattle. Copyright © 2010 The American Meat Science Association. Published by Elsevier Ltd. All rights reserved.

31 CFR 316.10 - Payment or redemption.

Code of Federal Regulations, 2010 CFR

2010-07-01

..., SERIES E § 316.10 Payment or redemption. (a) General. A Series E bond may be redeemed in accordance with... tables. However, the redemption value of a bond in that denomination will be equal to ten times the.... (b) Federal Reserve Banks and Branches and United States Treasury. Owners of Series E bonds may...

31 CFR 316.10 - Payment or redemption.

Code of Federal Regulations, 2014 CFR

2014-07-01

..., SERIES E § 316.10 Payment or redemption. (a) General. A Series E bond may be redeemed in accordance with... tables. However, the redemption value of a bond in that denomination will be equal to ten times the.... (b) Federal Reserve Banks and Branches and United States Treasury. Owners of Series E bonds may...

31 CFR 316.10 - Payment or redemption.

Code of Federal Regulations, 2011 CFR

2011-07-01

..., SERIES E § 316.10 Payment or redemption. (a) General. A Series E bond may be redeemed in accordance with... tables. However, the redemption value of a bond in that denomination will be equal to ten times the.... (b) Federal Reserve Banks and Branches and United States Treasury. Owners of Series E bonds may...

31 CFR 316.10 - Payment or redemption.

Code of Federal Regulations, 2012 CFR

2012-07-01

..., SERIES E § 316.10 Payment or redemption. (a) General. A Series E bond may be redeemed in accordance with... tables. However, the redemption value of a bond in that denomination will be equal to ten times the.... (b) Federal Reserve Banks and Branches and United States Treasury. Owners of Series E bonds may...

31 CFR 316.10 - Payment or redemption.

Code of Federal Regulations, 2013 CFR

2013-07-01

..., SERIES E § 316.10 Payment or redemption. (a) General. A Series E bond may be redeemed in accordance with... tables. However, the redemption value of a bond in that denomination will be equal to ten times the.... (b) Federal Reserve Banks and Branches and United States Treasury. Owners of Series E bonds may...

Study of β2-Glycoprotein I Polymorphisms in Patients With Chronic Renal Failure as a Predisposing Factor for the Development of Anti-β2-Glycoprotein I Auto-Antibodies.

PubMed

Serrano, M; Cabrera-Marante, O; Martínez-Flores, J A; Morales, P; Pérez, D; Mora, S; García, F; González, E; Paz-Artal, E; Morales, J M; Serrano, A

2016-11-01

Immunoglobulin (Ig)A anti-β 2 -glycoprotein I (aB2GP1) antibodies are associated with thrombotic events, cardiovascular morbidity, and death in dialysis patients. About 30% of patients with chronic renal disease are positive for IgA aB2GP1; however, the origin of these antibodies is unknown. It has been speculated that dialysis membranes, age, or etiology of renal base disease are possible precipitating factors, although these factors do not appear to be the source of antibodies. B2GP1 is a protein of 326 amino acids grouped into five domains. Eight polymorphisms have been described; the most important are Val/Leu 247 , which appears to predispose aB2GP1 antibody production in patients with anti-phospholipid syndrome, and Trp/Ser 316 , which appears to have protective antibody production of aB2GP1. DNA samples from 92 patients with renal failure on hemodialysis were randomly collected with a 1:1 ratio for the positivity for IgA aB2GP1. Forty-six samples were positive for IgA aB2GP1 (group 1) and 46 negative for IgA aB2GP1 (group 2). All samples were anonymized to study polymorphism Val/Leu 247 and polymorphism Trp/Ser 316 . No significant differences were observed between those who were positive or negative for IgA aB2GP1 in patients with renal failure treated with hemodialysis and the polymorphism located in codons 247 and 316. The two groups of patients have the same prevalence in polymorphisms 247 and 316, and therefore there appears not to be a genetic predisposition in our population. New trigger factors must be studied. Copyright © 2016 Elsevier Inc. All rights reserved.

Reducing Staphylococcus aureus biofilm formation on stainless steel 316L using functionalized self-assembled monolayers.

PubMed

Kruszewski, Kristen M; Nistico, Laura; Longwell, Mark J; Hynes, Matthew J; Maurer, Joshua A; Hall-Stoodley, Luanne; Gawalt, Ellen S

2013-05-01

Stainless steel 316L (SS316L) is a common material used in orthopedic implants. Bacterial colonization of the surface and subsequent biofilm development can lead to refractory infection of the implant. Since the greatest risk of infection occurs perioperatively, strategies that reduce bacterial adhesion during this time are important. As a strategy to limit bacterial adhesion and biofilm formation on SS316L, self-assembled monolayers (SAMs) were used to modify the SS316L surface. SAMs with long alkyl chains terminated with hydrophobic (-CH3) or hydrophilic (oligoethylene glycol) tail groups were used to form coatings and in an orthogonal approach, SAMs were used to immobilize gentamicin or vancomycin on SS316L for the first time to form an "active" antimicrobial coating to inhibit early biofilm development. Modified SS316L surfaces were characterized using surface infrared spectroscopy, contact angles, MALDI-TOF mass spectrometry and atomic force microscopy. The ability of SAM-modified SS316L to retard biofilm development by Staphylococcus aureus was functionally tested using confocal scanning laser microscopy with COMSTAT image analysis, scanning electron microscopy and colony forming unit analysis. Neither hydrophobic nor hydrophilic SAMs reduced biofilm development. However, gentamicin-linked and vancomycin-linked SAMs significantly reduced S. aureus biofilm formation for up to 24 and 48 h, respectively. Copyright © 2013 Elsevier B.V. All rights reserved.

Origins, design and implementation of the China GAVI project.

PubMed

Liang, Xiaofeng; Cui, Fuqiang; Hadler, Stephen; Wang, Xiaojun; Luo, Huiming; Chen, Yuansheng; Kane, Mark; Shapiro, Craig; Yang, Weizhong; Wang, Yu

2013-12-27

China received GAVI support for hepatitis B vaccination in 2001 because of high disease burden and strong government will to protect infants at risk. The China/GAVI project, implemented since 2002, was funded 50% by GAVI and 50% by the Government of China. The purpose of the project was to increase coverage of hepatitis B vaccine through a pro-poor approach targeting all counties of the 12 Western provinces and poverty counties of the 10 Central provinces, to accelerate integration of hepatitis B vaccine into routine immunization, and assure immunization injection safety. The mechanism of internal coordination among multiple government entities and international cooperation was established and comprehensive strategies were used to improve vaccine coverage and injection safety. After 8 years of implementation, 193,000 health care workers in 118,316 health care facilities participated in the project, mostly at the township hospitals level (55,051) and in community centres (104,547). Through the China GAVI project, the 85% HepB3 coverage goal was reached in 98% of GAVI China project counties, the 75% timely birth dose (TBD) coverage goal was reached in 80% of GAVI project counties, and AD syringes were introduced into 100% of GAVI-supported areas. Additionally, the GAVI project was instrumental in convincing the Chinese Government to sustainably introduce and fully fund HepB vaccine for all newborns in China. The impact of hepB vaccination on HBsAg prevalence was observed throughout China, as HBsAg prevalence (previously ~10%) is now less than 1% among children under 5 years of age. Copyright © 2012 Elsevier Ltd. All rights reserved.

Microstructure and Corrosion Resistance of Laser Additively Manufactured 316L Stainless Steel

NASA Astrophysics Data System (ADS)

Trelewicz, Jason R.; Halada, Gary P.; Donaldson, Olivia K.; Manogharan, Guha

2016-03-01

Additive manufacturing (AM) of metal alloys to produce complex part designs via powder bed fusion methods such as laser melting promises to be a transformative technology for advanced materials processing. However, effective implementation of AM processes requires a clear understanding of the processing-structure-properties-performance relationships in fabricated components. In this study, we report on the formation of micro and nanoscale structures in 316L stainless steel samples printed by laser AM and their implications for general corrosion resistance. A variety of techniques including x-ray diffraction, optical, scanning and transmission electron microscopy, x-ray fluorescence, and energy dispersive x-ray spectroscopy were employed to characterize the microstructure and chemistry of the laser additively manufactured 316L stainless steel, which are compared with wrought 316L coupons via electrochemical polarization. Apparent segregation of Mo has been found to contribute to a loss of passivity and an increased anodic current density. While porosity will also likely impact the environmental performance (e.g., facilitating crevice corrosion) of AM alloys, this work demonstrates the critical influence of microstructure and heterogeneous solute distributions on the corrosion resistance of laser additively manufactured 316L stainless steel.

Antimicrobial Cu-bearing stainless steel scaffolds.

PubMed

Wang, Qiang; Ren, Ling; Li, Xiaopeng; Zhang, Shuyuan; Sercombe, Timothy B; Yang, Ke

2016-11-01

Copper-bearing stainless steel scaffolds with two different structures (Body Centered Cubic and Gyroid labyrinth) at two solid fractions (25% and 40%) were fabricated from both 316L powder and a mixture of 316L and elemental Cu powder using selective laser melting, and relative 316L scaffolds were served as control group. After processing, the antimicrobial testing demonstrated that the 316L-Cu scaffolds presented excellent antimicrobial activity against Escherichia coli and Staphylococcus aureus, and the cell viability assay indicated that there was no cytotoxic effect of 316L-Cu scaffolds on rat marrow mesenchymal stem cells. As such, these have the potential to reduce implant-associated infections. The Cu was also found to homogeneously distribute within the microstructure by scanning electronic microcopy. The addition of Cu would not significantly affect its strength and stiffness compared to 316L scaffold, and the stiffness of all the scaffolds (3-20GPa) is similar to that of bone and much less than that of bulk stainless steel. Consequently, fabrication of such low stiffness porous structures, especially coupled with the addition of antimicrobial Cu, may provide a new direction for medical stainless steels. Copyright © 2016 Elsevier B.V. All rights reserved.

Influence of the field humiture environment on the mechanical properties of 316L stainless steel repaired with Fe314

NASA Astrophysics Data System (ADS)

Zhang, Lianzhong; Li, Dichen; Yan, Shenping; Xie, Ruidong; Qu, Hongliang

2018-04-01

The mechanical properties of 316L stainless steel repaired with Fe314 under different temperatures and humidities without inert gas protection were studied. Results indicated favorable compatibility between Fe314 and 316L stainless steel. The average yield strength, tensile strength, and sectional contraction percentage were higher in repaired samples than in 316L stainless steel, whereas the elongation rate was slightly lower. The different conditions of humiture environment on the repair sample exerted minimal influence on tensile and yield strengths. The Fe314 cladding layer was mainly composed of equiaxed grains and mixed with randomly oriented columnar crystal and tiny pores or impurities in the tissue. Results indicated that the hardness value of Fe314 cladding layer under different humiture environments ranged within 419-451.1 HV0.2. The field humiture environment also showed minimal impact on the average hardness of Fe314 cladding layers. Furthermore, 316L stainless steel can be repaired through laser cladding by using Fe314 powder without inert gas protection under different temperatures and humidity environments.

32 CFR 2004.11 - Agency Implementing Regulations, Internal Rules, or Guidelines [102(b)(3)].

Code of Federal Regulations, 2014 CFR

2014-07-01

..., or Guidelines [102(b)(3)]. 2004.11 Section 2004.11 National Defense Other Regulations Relating to... NATIONAL INDUSTRIAL SECURITY PROGRAM DIRECTIVE NO. 1 Implementation and Oversight § 2004.11 Agency Implementing Regulations, Internal Rules, or Guidelines [102(b)(3)]. (a) Reviews and Updates. All implementing...

32 CFR 2004.11 - Agency Implementing Regulations, Internal Rules, or Guidelines [102(b)(3)].

Code of Federal Regulations, 2012 CFR

2012-07-01

..., or Guidelines [102(b)(3)]. 2004.11 Section 2004.11 National Defense Other Regulations Relating to... NATIONAL INDUSTRIAL SECURITY PROGRAM DIRECTIVE NO. 1 Implementation and Oversight § 2004.11 Agency Implementing Regulations, Internal Rules, or Guidelines [102(b)(3)]. (a) Reviews and Updates. All implementing...

32 CFR 2004.11 - Agency Implementing Regulations, Internal Rules, or Guidelines [102(b)(3)].

Code of Federal Regulations, 2013 CFR

2013-07-01

..., or Guidelines [102(b)(3)]. 2004.11 Section 2004.11 National Defense Other Regulations Relating to... NATIONAL INDUSTRIAL SECURITY PROGRAM DIRECTIVE NO. 1 Implementation and Oversight § 2004.11 Agency Implementing Regulations, Internal Rules, or Guidelines [102(b)(3)]. (a) Reviews and Updates. All implementing...

32 CFR 2004.11 - Agency Implementing Regulations, Internal Rules, or Guidelines [102(b)(3)].

Code of Federal Regulations, 2011 CFR

2011-07-01

..., or Guidelines [102(b)(3)]. 2004.11 Section 2004.11 National Defense Other Regulations Relating to... NATIONAL INDUSTRIAL SECURITY PROGRAM DIRECTIVE NO. 1 Implementation and Oversight § 2004.11 Agency Implementing Regulations, Internal Rules, or Guidelines [102(b)(3)]. (a) Reviews and Updates. All implementing...

CL316,243, a β3-adrenergic receptor agonist, induces muscle hypertrophy and increased strength.

PubMed

Puzzo, Daniela; Raiteri, Roberto; Castaldo, Clotilde; Capasso, Raffaele; Pagano, Ester; Tedesco, Mariateresa; Gulisano, Walter; Drozd, Lisaveta; Lippiello, Pellegrino; Palmeri, Agostino; Scotto, Pietro; Miniaci, Maria Concetta

2016-11-22

Studies in vitro have demonstrated that β3-adrenergic receptors (β3-ARs) regulate protein metabolism in skeletal muscle by promoting protein synthesis and inhibiting protein degradation. In this study, we evaluated whether activation of β3-ARs by the selective agonist CL316,243 modifies the functional and structural properties of skeletal muscles of healthy mice. Daily injections of CL316,243 for 15 days resulted in a significant improvement in muscle force production, assessed by grip strength and weight tests, and an increased myofiber cross-sectional area, indicative of muscle hypertrophy. In addition, atomic force microscopy revealed a significant effect of CL316,243 on the transversal stiffness of isolated muscle fibers. Interestingly, the expression level of mammalian target of rapamycin (mTOR) downstream targets and neuronal nitric oxide synthase (NOS) was also found to be enhanced in tibialis anterior and soleus muscles of CL316,243 treated mice, in accordance with previous data linking β3-ARs to mTOR and NOS signaling pathways. In conclusion, our data suggest that CL316,243 systemic administration might be a novel therapeutic strategy worthy of further investigations in conditions of muscle wasting and weakness associated with aging and muscular diseases.

FY16 ASME High Temperature Code Activities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Swindeman, M. J.; Jetter, R. I.; Sham, T. -L.

2016-09-01

One of the objectives of the ASME high temperature Code activities is to develop and validate both improvements and the basic features of Section III, Division 5, Subsection HB, Subpart B (HBB). The overall scope of this task is to develop a computer program to be used to assess whether or not a specific component under specified loading conditions will satisfy the elevated temperature design requirements for Class A components in Section III, Division 5, Subsection HB, Subpart B (HBB). There are many features and alternative paths of varying complexity in HBB. The initial focus of this task is amore » basic path through the various options for a single reference material, 316H stainless steel. However, the program will be structured for eventual incorporation all the features and permitted materials of HBB. Since this task has recently been initiated, this report focuses on the description of the initial path forward and an overall description of the approach to computer program development.« less

Encapsulated fuel unit and method of forming same

DOEpatents

Groh, Edward F.; Cassidy, Dale A.; Lewandowski, Edward F.

1985-01-01

This invention teaches an encapsulated fuel unit for a nuclear reactor, such as for an enriched uranium fuel plate of thin cross section of the order of 1/64 or 1/8 of an inch and otherwise of rectangular shape 1-2 inches wide and 2-4 inches long. The case is formed from (a) two similar channel-shaped half sections extended lengthwise of the elongated plate and having side edges butted and welded together to define an open ended tube-like structure and from (b) porous end caps welded across the open ends of the tube-like structure. The half sections are preferably of stainless steel between 0.002 and 0.01 of an inch thick, and are beam welded together over and within machined and hardened tool steel chill blocks. The porous end caps preferably are of T-316-L stainless steel having pores of approximately 3-10 microns size.

Improved encapsulated fuel unit and method of forming same

DOEpatents

Groh, E.F.; Cassidy, D.A.; Lewandowski, E.

1982-09-07

This invention teaches an encapsulated fuel unit for a nuclear reactor, such as for an enriched uranium fuel plate of thin cross section of the order of 1/64 or 1/8 of an inch and otherwise of rectangular shape 1 to 2 inches wide and 2 to 4 inches long. The case is formed from (a) two similar channel-shaped half sections extended lengthwise of the elongated plate and having side edges butted and welded together to define an open ended tube-like structure and from (b) porous end caps welded across the open ends of the tube-like structure. The half sections are preferably of stainless steel between 0.002 and 0.01 of an inch thick, and are beam welded together over and within machined and hardened tool steel chill blocks. The porous end caps preferably are of T-316-L stainless steel having pores of approximately 3 to 10 microns size.

Development of Co-based bulk metallic glasses as potential biomaterials.

PubMed

Zhou, Zeyan; Wei, Qin; Li, Qiang; Jiang, Bingliang; Chen, You; Sun, Yanfei

2016-12-01

A new series of Co80-x-yCrxMoyP14B6 (x=5 y=5; x=5 y=10; x=10 y=10, all values in at.%) bulk metallic glasses (BMGs) with a maximum diameter of 1.5mm has been developed for using them as potential bio-implant materials by a combination of fluxing treatment and J-quenching technique. The performance of the present Co-based BMGs in biomedical implant applications was investigated as compared to the CoCrMo biomedical alloy (ASTM F75) and 316L stainless steel (316L SS). The corrosion behavior of the samples was investigated in both Hank's solution (pH=7.4) and artificial saliva solution (pH=6.3) at 37°C employing electrochemical measurements. The results indicate that the Co-based BMGs exhibit much higher corrosion resistance in the simulated body solutions than that of 316L SS. Compared with the corrosion resistance of ASTM F75, that of Co70Cr5Mo5P14B6 and Co65Cr5Mo10P14B6 BMGs is found to be lower and that of Co60Cr10Mo10P14B6 BMG is higher. The concentrations of Co, Cr, and Mo ions released into the simulated body solutions from our Co-based BMGs after potentiodynamic polarization are significantly lower than that released from ASTM F75. The biocompatibility of the specimens was evaluated using an in vitro test of NIH3T3 cell culture in the specimen extraction media for 1, 3, 5, and 7days, revealing the non-cytotoxicity of the Co-based BMGs towards NIH3T3 cells. Moreover, examinations on the cell adhesion and growth on the surface of the specimens indicate that the Co-based BMGs exhibit better cell viability compared to ASTM F75 and 316L SS biomedical alloys. Copyright © 2016 Elsevier B.V. All rights reserved.

A novel high nitrogen nickel-free coronary stents system: evaluation in a porcine model.

PubMed

Zhang, Bin; Chen, Ming; Zheng, Bo; Wang, Xin Gang; Wang, Xi Ting; Fan, Yuan Yuan; Huo, Yong

2014-04-01

To study the safety of the novel high nitrogen nickel-free austenitic stainless steel bare metal stents (BMS) in a recognized porcine coronary model and to select a better grid structure of it. Three types of stents were randomly implanted in different coronary arteries of the same pig: 316 L stainless steel BMS (316 L-BMS) (n=12), novel high nitrogen nickel-free stents Grid A (NF-A-BMS) (n=12) and novel high nitrogen nickel-free stents Grid B (NF-B-BMS) (n=12). In total, eighteen animals underwent successful random placement of 36 oversized stents in the coronary arteries. Coronary angiography was performed after 36 d of stents implantation. Nine animals were respectively sacrificed after 14 d and 36 d for histomorphologic analysis. Quantitative coronary angiography (QCA) showed similar luminal loss (LL) in the three groups: (0.21 ± 0.17) mm for 316 L-BMS, (0.16 ± 0.12) mm for NF-A-BMS, (0.24 ± 0.15) mm for NF-B-BMS (P>0.05). Histomorphomeric analysis after 15 d and 36 d revealed that there was also no significant difference among the three groups in neointimal area (NA) with similar injury scores respectively. High magnification histomorphologic examination showed similar inflammation scores in the three groups, but NF-A-BMS group had poorer endothelialization scores compared with NF-B-BMS group, 2.00 ± 0.63 vs. 2.83 ± 0.41 (P=0.015) at 15 d, which also could be proved by the scanning electron microscope. However, the difference could not been observed at 36 d. The novel NF-BMS showed similar safety as 316 L-BMS during the short-term study. NF-B-BMS had better endothelialization than NF-A-BMS and this may owe to the specific strut units. Copyright © 2014 The Editorial Board of Biomedical and Environmental Sciences. Published by China CDC. All rights reserved.

Naturally occurring mutations associated with resistance to HCV NS5B polymerase and NS3 protease inhibitors in treatment-naïve patients with chronic hepatitis C.

PubMed

Costantino, Angela; Spada, Enea; Equestre, Michele; Bruni, Roberto; Tritarelli, Elena; Coppola, Nicola; Sagnelli, Caterina; Sagnelli, Evangelista; Ciccaglione, Anna Rita

2015-11-14

The detection of baseline resistance mutations to new direct-acting antivirals (DAAs) in HCV chronically infected treatment-naïve patients could be important for their management and outcome prevision. In this study, we investigated the presence of mutations, which have been previously reported to be associated with resistance to DAAs in HCV polymerase (NS5B) and HCV protease (NS3) regions, in sera of treatment-naïve patients. HCV RNA from 152 naïve patients (84 % Italian and 16 % immigrants from various countries) infected with different HCV genotypes (21,1a; 21, 1b; 2, 2a; 60, 2c; 22, 3a; 25, 4d and 1, 4k) was evaluated for sequence analysis. Amplification and sequencing of fragments in the NS5B (nt 8256-8640) and NS3 (nt 3420-3960) regions of HCV genome were carried out for 152 and 28 patients, respectively. The polymorphism C316N/H in NS5B region, associated with resistance to sofosbuvir, was detected in 9 of the 21 (43 %) analysed sequences from genotype 1b-infected patients. Naturally occurring mutations V36L, and M175L in the NS3 protease region were observed in 100 % of patients infected with subtype 2c and 4. A relevant proportion of treatment naïve genotype 1b infected patients evaluated in this study harboured N316 polymorphism and might poorly respond to sofosbuvir treatment. As sofosbuvir has been approved for treatment of HCV chronic infection in USA and Europe including Italy, pre-treatment testing for N316 polymorphism on genotype 1b naïve patients should be considered for this drug.

75 FR 37712 - Automatic Dependent Surveillance-Broadcast (ADS-B) Out Performance Requirements To Support Air...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-30

...-29305; Amdt. No. 91-316] RIN 2120-AI92 Automatic Dependent Surveillance--Broadcast (ADS-B) Out... Dependent Surveillance--Broadcast (ADS-B) Out avionics on aircraft operating in Classes A, B, and C airspace... technical questions concerning this final rule, contact Vincent Capezzuto, Surveillance and Broadcast...

20 CFR 627.906 - Determinations on State and SDA implementation.

Code of Federal Regulations, 2010 CFR

2010-04-01

... questioned costs related to the implementation of the provisions described in paragraph (b) of this section... implementation. 627.906 Section 627.906 Employees' Benefits EMPLOYMENT AND TRAINING ADMINISTRATION, DEPARTMENT OF... § 627.906 Determinations on State and SDA implementation. (a) The Department expects that the States and...

Effect of mixed alloy combinations on fretting corrosion performance of spinal screw and rod implants.

PubMed

Mali, Sachin A; Singh, Vaneet; Gilbert, Jeremy L

2017-07-01

Spinal implants are made from a variety of materials to meet the unique mechanical demands of each application. However, the medical device community has raised concern about mixing dissimilar metals in an implant because of fear of inducing corrosion. There is a lack of systematic studies on the effects of mixing metals on performance of spinal implants, especially in fretting corrosion conditions. Hence, the goal was to determine whether mixing stainless steel (SS316L), titanium alloy (Ti6Al4V) and cobalt chromium (CoCrMo) alloy components in a spinal implant leads to any increased risk of corrosion degradation. Spinal constructs consisting of single assembly screw-connector-rod components were tested using a novel short-term cyclic fretting corrosion test method. A total of 17 alloy component combinations (comprised of SS316L, Ti6Al4V-anodized and CoCrMo alloy for rod, screws and connectors) were tested under three anatomic orientations. Spinal constructs having all SS316L were most susceptible to fretting-initiated crevice corrosion attack and showed higher average fretting currents (∼25 - 30 µA), whereas constructs containing all Ti6Al4V components were less susceptible to fretting corrosion with average fretting currents in the range of 1 - 6 µA. Mixed groups showed evidence of fretting corrosion but they were not as severe as all SS316L group. SEM results showed evidence of severe corrosion attack in constructs having SS316L components. There also did not appear to be any galvanic effects of combining alloys together. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 105B: 1169-1177, 2017. © 2016 Wiley Periodicals, Inc.

Can gamma irradiation during radiotherapy influence the metal release process for biomedical CoCrMo and 316L alloys?

PubMed

Wei, Zheng; Edin, Jonathan; Karlsson, Anna Emelie; Petrovic, Katarina; Soroka, Inna L; Odnevall Wallinder, Inger; Hedberg, Yolanda

2018-02-09

The extent of metal release from implant materials that are irradiated during radiotherapy may be influenced by irradiation-formed radicals. The influence of gamma irradiation, with a total dose of relevance for radiotherapy (e.g., for cancer treatments) on the extent of metal release from biomedical stainless steel AISI 316L and a cobalt-chromium alloy (CoCrMo) was investigated in physiological relevant solutions (phosphate buffered saline with and without 10 g/L bovine serum albumin) at pH 7.3. Directly after irradiation, the released amounts of metals were significantly higher for irradiated CoCrMo as compared to nonirradiated CoCrMo, resulting in an increased surface passivation (enhanced passive conditions) that hindered further release. A similar effect was observed for 316L showing lower nickel release after 1 h of initially irradiated samples as compared to nonirradiated samples. However, the effect of irradiation (total dose of 16.5 Gy) on metal release and surface oxide composition and thickness was generally small. Most metals were released initially (within seconds) upon immersion from CoCrMo but not from 316L. Albumin induced an increased amount of released metals from AISI 316L but not from CoCrMo. Albumin was not found to aggregate to any greater extent either upon gamma irradiation or in the presence of trace metal ions, as determined using different light scattering techniques. Further studies should elucidate the effect of repeated friction and fractionated low irradiation doses on the short- and long term metal release process of biomedical materials. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 2018. © 2018 The Authors Journal of Biomedical Materials Research Part B: Applied Biomaterials Published by Wiley Periodicals, Inc.

[Use of the Elektronika-T3-16M special-purpose computer for the automatic processing of cytophotometric and cytofluorimetric data].

PubMed

Loktionov, A S; Prianishnikov, V A

1981-05-01

A system has been proposed to provide the automatic analysis of data on: a) point cytophotometry, b) two-wave cytophotometry, c) cytofluorimetry. The system provides the input of the data from a photomultiplier to a specialized computer "Electronica-T3-16M" in addition to the simultaneous statistical analysis of these. The information on the programs used is presented. The advantages of the system, compared with some commercially available cytophotometers, are indicated.

General Plan Environmental Assessment for Joint Base Andrews-Naval Air Facility, Washington, Maryland

DTIC Science & Technology

2011-04-01

privatization of the water and natural gas systems and other utility systems , construction of the William B. Jones building, and the creation of...at the Upper Marlboro Branch Library of the Prince George’s County Memorial Library System at 14 730 Main St. Upper Marlboro, MD 20772 and on the...Wing 113 WG 113th Wing 316 WG 316th Wing 459 ARW 459th Air Refueling Wing AAM Annual Arithmetic Mean ACES Automated Civil Engineering System ADP

Effects of simulated inflammation on the corrosion of 316L stainless steel.

PubMed

Brooks, Emily K; Brooks, Richard P; Ehrensberger, Mark T

2017-02-01

Stainless steel alloys, including 316L, find use in orthopaedics, commonly as fracture fixation devices. Invasive procedures involved in the placement of these devices will provoke a local inflammatory response that produces hydrogen peroxide (H 2 O 2 ) and an acidic environment surrounding the implant. This study assessed the influence of a simulated inflammatory response on the corrosion of 316L stainless steel. Samples were immersed in an electrolyte representing either normal or inflammatory physiological conditions. After 24h of exposure, electrochemical impedance spectroscopy (EIS) and inductively coupled plasma mass spectroscopy (ICPMS) were used to evaluate differences in corrosion behavior and ion release induced by the inflammatory conditions. Scanning electron microscopy (SEM) and energy-dispersive x-ray spectroscopy (EDX) were used to evaluate surface morphology and corrosion products formed on the sample surface. Inflammatory conditions, involving the presence of H 2 O 2 and an acidic pH, significantly alter the corrosion processes of 316L stainless steel, promoting aggressive and localized corrosion. It is demonstrated that particular consideration should be given to 316L stainless steel implants with crevice susceptible areas (ex. screw-head/plate interface), as those areas may have an increased probability of rapid and aggressive corrosion when exposed to inflammatory conditions. Copyright © 2016 Elsevier B.V. All rights reserved.

48 CFR 47.403 - Guidelines for implementation of the Fly America Act.

Code of Federal Regulations, 2014 CFR

2014-10-01

... implementation of the Fly America Act. 47.403 Section 47.403 Federal Acquisition Regulations System FEDERAL... Guidelines for implementation of the Fly America Act. This section 47.403 is based on the Guidelines for Implementation of the Fly America Act (case number B-138942), issued by the Comptroller General of the United...

48 CFR 47.403 - Guidelines for implementation of the Fly America Act.

Code of Federal Regulations, 2011 CFR

2011-10-01

... implementation of the Fly America Act. 47.403 Section 47.403 Federal Acquisition Regulations System FEDERAL... Guidelines for implementation of the Fly America Act. This section 47.403 is based on the Guidelines for Implementation of the Fly America Act (case number B-138942), issued by the Comptroller General of the United...

48 CFR 47.403 - Guidelines for implementation of the Fly America Act.

Code of Federal Regulations, 2012 CFR

2012-10-01

... implementation of the Fly America Act. 47.403 Section 47.403 Federal Acquisition Regulations System FEDERAL... Guidelines for implementation of the Fly America Act. This section 47.403 is based on the Guidelines for Implementation of the Fly America Act (case number B-138942), issued by the Comptroller General of the United...

48 CFR 47.403 - Guidelines for implementation of the Fly America Act.

Code of Federal Regulations, 2013 CFR

2013-10-01

... implementation of the Fly America Act. 47.403 Section 47.403 Federal Acquisition Regulations System FEDERAL... Guidelines for implementation of the Fly America Act. This section 47.403 is based on the Guidelines for Implementation of the Fly America Act (case number B-138942), issued by the Comptroller General of the United...

40 CFR 52.677 - Original identification of plan section.

Code of Federal Regulations, 2014 CFR

2014-07-01

... PROGRAMS (CONTINUED) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS Idaho § 52.677 Original identification of plan section. (a) This section identifies the original “Idaho Air Quality Implementation Plan” and all revisions submitted by Idaho that were federally approved prior to November 12, 2004. (b) The...

40 CFR 52.677 - Original identification of plan section.

Code of Federal Regulations, 2013 CFR

2013-07-01

... PROGRAMS (CONTINUED) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS Idaho § 52.677 Original identification of plan section. (a) This section identifies the original “Idaho Air Quality Implementation Plan” and all revisions submitted by Idaho that were federally approved prior to November 12, 2004. (b) The...

40 CFR 52.677 - Original identification of plan section.

Code of Federal Regulations, 2012 CFR

2012-07-01

... PROGRAMS (CONTINUED) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS Idaho § 52.677 Original identification of plan section. (a) This section identifies the original “Idaho Air Quality Implementation Plan” and all revisions submitted by Idaho that were federally approved prior to November 12, 2004. (b) The...

40 CFR 52.677 - Original identification of plan section.

Code of Federal Regulations, 2011 CFR

2011-07-01

... PROGRAMS (CONTINUED) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS Idaho § 52.677 Original identification of plan section. (a) This section identifies the original “Idaho Air Quality Implementation Plan” and all revisions submitted by Idaho that were federally approved prior to November 12, 2004. (b) The...

14 CFR 1203b.100 - Purpose.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 14 Aeronautics and Space 5 2013-01-01 2013-01-01 false Purpose. 1203b.100 Section 1203b.100 Aeronautics and Space NATIONAL AERONAUTICS AND SPACE ADMINISTRATION SECURITY PROGRAMS; ARREST AUTHORITY AND USE OF FORCE BY NASA SECURITY FORCE PERSONNEL § 1203b.100 Purpose. This regulation implements section...

14 CFR 1203b.100 - Purpose.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false Purpose. 1203b.100 Section 1203b.100 Aeronautics and Space NATIONAL AERONAUTICS AND SPACE ADMINISTRATION SECURITY PROGRAMS; ARREST AUTHORITY AND USE OF FORCE BY NASA SECURITY FORCE PERSONNEL § 1203b.100 Purpose. This regulation implements section...

14 CFR 1203b.100 - Purpose.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 14 Aeronautics and Space 5 2012-01-01 2012-01-01 false Purpose. 1203b.100 Section 1203b.100 Aeronautics and Space NATIONAL AERONAUTICS AND SPACE ADMINISTRATION SECURITY PROGRAMS; ARREST AUTHORITY AND USE OF FORCE BY NASA SECURITY FORCE PERSONNEL § 1203b.100 Purpose. This regulation implements section...

14 CFR 1203b.100 - Purpose.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 5 2011-01-01 2010-01-01 true Purpose. 1203b.100 Section 1203b.100 Aeronautics and Space NATIONAL AERONAUTICS AND SPACE ADMINISTRATION SECURITY PROGRAMS; ARREST AUTHORITY AND USE OF FORCE BY NASA SECURITY FORCE PERSONNEL § 1203b.100 Purpose. This regulation implements section...

76 FR 709 - Guidelines for Awarding Clean Water Act Section 319 Base Grants to Indian Tribes

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-06

... in implementing approved NPS management programs developed pursuant to section 319(b). The primary goal of the NPS management program is to control NPS pollution through implementation of management... may be used for a range of activities that implement the tribe's approved NPS management program...

76 FR 20237 - Approval and Promulgation of Air Quality Implementation Plans; District of Columbia; Section 110...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-12

... 1997 PM 2.5 NAAQS dated October 22, 2008: 110(a)(2)(A), (B), (C), (D)(ii), (E), (F), (G), (H), (J), (K...), (B), (C), (D)(ii), (E), (F), (G), (H), (J), (K), (L), and (M) necessary to implement, maintain, and... September 22, 2008 addressed the section 110(a)(2) requirements for the 1997 PM 2.5 NAAQS; and the submittal...

Surface modification of SS-316L steel using microwave processed Ni/WC based composite clads

NASA Astrophysics Data System (ADS)

Kaushal, Sarbjeet; Singh, Dilkaran; Gupta, Dheeraj; Jain, Vivek; Bhowmick, Hiralal

2018-04-01

In the present investigation, the claddings of Ni/WC based composite powder were developed on SS-316L steel through microwave hybrid heating method. The experimental trials were carried out inside a domestic microwave oven working at 2.45 GHz and 900 W. The so developed composite clads were characterized using XRD, Vicker's microhardness measurement, and SEM/EDS. The presence of different phases like Co3W3C, NiW, FeNi3, NiSi was confirmed by XRD analysis. Microstructural analysis revealed that the clad of approximately 0.6 mm thickness was developed with no interfacial cracks and negligible porosity. The WC particles were uniformly distributed in the form of cellular structure inside Ni matrix. The average Vicker's microhardness value of the clad section was observed as 925±50 HV, which is three times that of the SS-316L substrate.

48 CFR 352.216-70 - Additional cost principles.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Additional cost principles... Additional cost principles. As prescribed in 316.307(j), the Contracting Officer shall insert the following clause: Additional Cost Principles (January 2006) (a) Bid and proposal (B & P) costs. (1) B & P costs are...

21 CFR 1321.01 - DEA mailing addresses.

Code of Federal Regulations, 2014 CFR

2014-04-01

... Addresses Code of Federal Regulations Section—Topic DEA Mailing address DEA Administrator 1308.43(b)—Petition to initiate proceedings for rulemaking316.23(b)—Petition for grant of confidentiality for research..., Springfield, VA 22152-2639. 1301.18(c)—Research project controlled substance increase request. 1301.51...

21 CFR 1321.01 - DEA mailing addresses.

Code of Federal Regulations, 2012 CFR

2012-04-01

... Addresses Code of Federal Regulations Section—Topic DEA Mailing address DEA Administrator 1308.43(b)—Petition to initiate proceedings for rulemaking316.23(b)—Petition for grant of confidentiality for research..., Springfield, VA 22152-2639. 1301.18(c)—Research project controlled substance increase request. 1301.51...

21 CFR 1321.01 - DEA mailing addresses.

Code of Federal Regulations, 2013 CFR

2013-04-01

... Addresses Code of Federal Regulations Section—Topic DEA Mailing address DEA Administrator 1308.43(b)—Petition to initiate proceedings for rulemaking316.23(b)—Petition for grant of confidentiality for research..., Springfield, VA 22152-2639. 1301.18(c)—Research project controlled substance increase request. 1301.51...

21 CFR 1321.01 - DEA mailing addresses.

Code of Federal Regulations, 2010 CFR

2010-04-01

... Addresses Code of Federal Regulations Section—Topic DEA Mailing address DEA Administrator 1308.43(b)—Petition to initiate proceedings for rulemaking316.23(b)—Petition for grant of confidentiality for research..., Springfield, VA 22152-2639. 1301.18(c)—Research project controlled substance increase request. 1301.51...

21 CFR 1321.01 - DEA mailing addresses.

Code of Federal Regulations, 2011 CFR

2011-04-01

... Addresses Code of Federal Regulations Section—Topic DEA Mailing address DEA Administrator 1308.43(b)—Petition to initiate proceedings for rulemaking316.23(b)—Petition for grant of confidentiality for research..., Springfield, VA 22152-2639. 1301.18(c)—Research project controlled substance increase request. 1301.51...

76 FR 9556 - Procedures for Considering Requests From the Public for Textile and Apparel Safeguard Actions on...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-18

... in Title III, Subtitle B, Section 321 through Section 328 of the United States-Peru Trade Promotion.... Background Title III, Subtitle B, Section 321 through Section 328 of the United States-Peru Trade Promotion... Promotion Agreement Implementation Act, the Committee has determined that actions taken under this safeguard...

40 CFR 132.6 - Application of part 132 requirements in Great Lakes States and Tribes.

Code of Federal Regulations, 2012 CFR

2012-07-01

... the State of Indiana. (b) Effective September 5, 2000, the requirements of Procedure 3 in appendix F... in the States of Indiana, Michigan and Ohio. (d) Effective November 6, 2000, § 132.4(d)(2) shall...) Chemical mA bA Conversion factor (CF) Cadmium a,b 1.128 −3.6867 0.85 Chromium (III) a,b 0.819 +3.7256 0.316...

40 CFR 132.6 - Application of part 132 requirements in Great Lakes States and Tribes.

Code of Federal Regulations, 2014 CFR

2014-07-01

... the State of Indiana. (b) Effective September 5, 2000, the requirements of Procedure 3 in appendix F... in the States of Indiana, Michigan and Ohio. (d) Effective November 6, 2000, § 132.4(d)(2) shall...) Chemical mA bA Conversion factor (CF) Cadmium a,b 1.128 −3.6867 0.85 Chromium (III) a,b 0.819 +3.7256 0.316...

40 CFR 132.6 - Application of part 132 requirements in Great Lakes States and Tribes.

Code of Federal Regulations, 2013 CFR

2013-07-01

... the State of Indiana. (b) Effective September 5, 2000, the requirements of Procedure 3 in appendix F... in the States of Indiana, Michigan and Ohio. (d) Effective November 6, 2000, § 132.4(d)(2) shall...) Chemical mA bA Conversion factor (CF) Cadmium a,b 1.128 −3.6867 0.85 Chromium (III) a,b 0.819 +3.7256 0.316...

Strategic Goals Implementation Plan V2.0

DTIC Science & Technology

2008-01-01

newest ATARS ground station. (Sep 08) (DDR&E) 3.1.6 Take proactive steps to transition technology programs. DUSD(AS&C) • Proactive steps taken to...increases emphasis on math as gateway to physical science and engineering. • Expanded footprint of S&E education in Middle School. 3.3.4 Support

32 CFR 316.6 - Procedures and responsibilities.

Code of Federal Regulations, 2011 CFR

2011-07-01

... the “Records Management System for Implementing the Privacy Act” as provided by the GSA and National..., the System Manager of any record system will assure that records pertaining to an individual will be... the individual when the record is disclosed. The System Manager may require the individual to furnish...

32 CFR 316.6 - Procedures and responsibilities.

Code of Federal Regulations, 2012 CFR

2012-07-01

... the “Records Management System for Implementing the Privacy Act” as provided by the GSA and National..., the System Manager of any record system will assure that records pertaining to an individual will be... the individual when the record is disclosed. The System Manager may require the individual to furnish...

32 CFR 316.6 - Procedures and responsibilities.

Code of Federal Regulations, 2014 CFR

2014-07-01

... the “Records Management System for Implementing the Privacy Act” as provided by the GSA and National..., the System Manager of any record system will assure that records pertaining to an individual will be... the individual when the record is disclosed. The System Manager may require the individual to furnish...

32 CFR 316.6 - Procedures and responsibilities.

Code of Federal Regulations, 2013 CFR

2013-07-01

... the “Records Management System for Implementing the Privacy Act” as provided by the GSA and National..., the System Manager of any record system will assure that records pertaining to an individual will be... the individual when the record is disclosed. The System Manager may require the individual to furnish...

Additive Manufacturing of High-Performance 316L Stainless Steel Nanocomposites via Selective Laser Melting

NASA Astrophysics Data System (ADS)

AlMangour, Bandar Abdulaziz

Austenitic 316L stainless steel alloy is an attractive industrial material combining outstanding corrosion resistance, ductility, and biocompatibility, with promising structural applications and biomedical uses. However, 316L has low strength and wear resistance, limiting its high-performance applicability. Adding secondary hard nanoscale reinforcements to steel matrices, thereby forming steel-matrix nanocomposites (SMCs), can overcome these problems, improving the performance and thereby the applicability of 316L. However, SMC parts with complex-geometry cannot be easily achieved limiting its application. This can be avoided through additive manufacturing (AM) by generating layer-by-layer deposition using computer-aided design data. Expanding the range of AM-applicable materials is necessary to fulfill industrial demand. This dissertation presents the characteristics of new AM-processed high-performance 316L-matrix nanocomposites with nanoscale TiC or TiB2 reinforcements, addressing specific aspects of material design, process control and optimization, and physical metallurgy theory. The nanocomposites were prepared by high-energy ball-milling and consolidated by AM selective laser melting (SLM). Continuous and refined ring-like network structures were obtained with homogenously distributed reinforcements. Additional grain refinement occurred with reinforcement addition, attributed to nanoparticles acting as nuclei for heterogeneous nucleation. The influence of reinforcement content was first investigated; mechanical and tribological behaviors improved with increased reinforcement contents. The compressive yield strengths of composites with TiB2 or TiC reinforcements were approximately five or two times those of 316L respectively. Hot isostatic pressing post-treatment effectively eliminated major cracks and pores in SLM-fabricated components. The effects of the SLM processing parameters on the microstructure and mechanical performance were also investigated. Laser re-melting through double-scanning created higher-density SLM-processed parts with improved mechanical properties but longer production times. Certain scanning patterns minimized texture, creating near-isotropic structures. The energy density eta crucially improved densification at the expense of increased grain size, causing mechanical behavior tradeoffs. It also influenced the size and dispersion state of TiC. In-situ SMCs were fabricated by SLM, an encouraging low-cost processing approach for high-performance parts. Interestingly, in-situ SMCs exhibited higher microhardness values in comparison to the ex-situ composites under fixed SLM processing conditions because of fine, uniform reinforcement distribution. The developed nanocomposites show promise as high-performance materials. Future research is suggested for strategic material developments.

In Vitro Synergistic Interaction between Amphotericin B and Micafungin against Scedosporium spp.

PubMed Central

Yustes, Clara; Guarro, Josep

2005-01-01

The in vitro interaction between amphotericin B and micafungin against 36 isolates of Scedosporium spp. has been evaluated using checkerboard assays and the minimal effective concentration endpoint. Synergy was found for 82.4% of Scedosporium prolificans isolates and for 31.6% of Scedosporium apiospermum isolates. Antagonism was not observed. PMID:16048969

42 CFR 495.316 - State monitoring and reporting regarding activities required to receive an incentive payment.

Code of Federal Regulations, 2013 CFR

2013-10-01

... quality measures data; and (v) A description and quantitative data on how its incentive payment program... conditions to use for quality improvement, reduction of disparities, research or outreach. (B) Capability to... specific conditions to use for quality improvement, reduction of disparities, research, or outreach. (B...

42 CFR 495.316 - State monitoring and reporting regarding activities required to receive an incentive payment.

Code of Federal Regulations, 2014 CFR

2014-10-01

... quality measures data; and (v) A description and quantitative data on how its incentive payment program... conditions to use for quality improvement, reduction of disparities, research or outreach. (B) Capability to... specific conditions to use for quality improvement, reduction of disparities, research, or outreach. (B...

42 CFR 495.316 - State monitoring and reporting regarding activities required to receive an incentive payment.

Code of Federal Regulations, 2012 CFR

2012-10-01

... quality measures data; and (v) A description and quantitative data on how its incentive payment program... conditions to use for quality improvement, reduction of disparities, research or outreach. (B) Capability to... specific conditions to use for quality improvement, reduction of disparities, research, or outreach. (B...

45 CFR 160.104 - Modifications.

Code of Federal Regulations, 2010 CFR

2010-10-01

... paragraph (b) of this section, the Secretary may adopt a modification to a standard or implementation specification adopted under this subchapter no more frequently than once every 12 months. (b) The Secretary may adopt a modification at any time during the first year after the standard or implementation...

40 CFR 197.13 - How is Subpart B implemented?

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 25 2011-07-01 2011-07-01 false How is Subpart B implemented? 197.13 Section 197.13 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) RADIATION PROTECTION PROGRAMS PUBLIC HEALTH AND ENVIRONMENTAL RADIATION PROTECTION STANDARDS FOR YUCCA MOUNTAIN, NEVADA Public...

40 CFR 197.13 - How is Subpart B implemented?

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 25 2014-07-01 2014-07-01 false How is Subpart B implemented? 197.13 Section 197.13 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) RADIATION PROTECTION PROGRAMS PUBLIC HEALTH AND ENVIRONMENTAL RADIATION PROTECTION STANDARDS FOR YUCCA MOUNTAIN, NEVADA Public...

40 CFR 197.13 - How is Subpart B implemented?

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 26 2012-07-01 2011-07-01 true How is Subpart B implemented? 197.13 Section 197.13 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) RADIATION PROTECTION PROGRAMS PUBLIC HEALTH AND ENVIRONMENTAL RADIATION PROTECTION STANDARDS FOR YUCCA MOUNTAIN, NEVADA Public...

40 CFR 197.13 - How is Subpart B implemented?

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 26 2013-07-01 2013-07-01 false How is Subpart B implemented? 197.13 Section 197.13 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) RADIATION PROTECTION PROGRAMS PUBLIC HEALTH AND ENVIRONMENTAL RADIATION PROTECTION STANDARDS FOR YUCCA MOUNTAIN, NEVADA Public...

77 FR 31496 - Approval and Promulgation of Air Quality Implementation Plans; Massachusetts and New Hampshire...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-29

...(b)(2)(A) of the Clean Air Act (CAA), that the Boston-Lawrence-Worcester (Eastern Massachusetts...) proposing its determination under section 181(b)(2) that the Boston-Lawrence- Worcester (Eastern... section 181(b)(2)(A), that the Boston-Lawrence- Worcester (Eastern Massachusetts) moderate 1997 eight-hour...

29 CFR 780.316 - Thirteen week provision.

Code of Federal Regulations, 2010 CFR

2010-07-01

... consisting of seven consecutive 24-hour periods during which the employee worked at least 1 “man-day.” Section 3(u) of the Act defines a man-day as “any day during which an employee performs any agricultural... 13(a)(6)(C) (as well as section 3(e)(2)) comports with the traditional definition of week used in...

Methylmalonic Acid and Homocysteine as Indicators of Vitamin B-12 Deficiency in Cancer

PubMed Central

Vashi, Pankaj; Edwin, Persis; Popiel, Brenten; Lammersfeld, Carolyn; Gupta, Digant

2016-01-01

Background/Aims Normal or high serum vitamin B-12 levels can sometimes be seen in a B-12 deficient state, and can therefore be misleading. High levels of Methymalonic Acid (MMA) and Homocysteine (HC) have been identified as better indicators of B-12 deficiency than the actual serum B-12 level itself. We evaluated the prevalence of vitamin B-12 deficiency using appropriate cut-off levels of vitamin B-12, MMA and HC, and determined the relationship between serum levels of vitamin B-12, MMA and HC in cancer. Methods This is a cross-sectional study using a consecutive case series of 316 cancer patients first seen at Cancer Treatment Centers of America® (CTCA) at Midwestern Regional Medical Center between April 2014 and June 2014. All patients were evaluated at baseline for vitamin B-12 (pg/mL), MMA (nmol/L) and HC (μmol/L) levels. In accordance with previously published research, the following cut-offs were used to define vitamin B-12 deficiency: <300 pg/mL for vitamin B-12, >260 nmol/L for MMA and >12 μmol/L for HC. The relationship between B-12, MMA and HC was evaluated using Spearman's rho correlation coefficient and cross-tabulation analysis. Receiver Operating Characteristic (ROC) curves were estimated using the non-parametric method to further evaluate the diagnostic accuracy of vitamin B-12 using Fedosov quotient as the "gold standard". Results Mean age at presentation was 52.5 years. 134 (42.4%) patients were males while 182 (57.6%) were females. Median vitamin B-12, MMA and HC levels were 582.5 pg/mL, 146.5 nmol/L and 8.4 μmol/L respectively. Of 316 patients, 28 (8.9%) were vitamin B-12 deficient based on vitamin B-12 (<300pg/mL), 34 (10.8%) were deficient based on MMA (>260 nmol/L) while 55 (17.4%) were deficient based on HC (>12 μmol/L). Correlation analysis revealed a significant weak negative correlation between vitamin B-12 and MMA (rho = -0.22) as well as B-12 and HC (rho = -0.35). ROC curves suggested MMA to have the best discriminatory power in predicting B-12 deficiency. Conclusion Vitamin B-12 is poorly correlated with MMA and HC in cancer. Using serum vitamin B-12 alone to evaluate B-12 status in cancer may fail to identify those with functional deficiency. A thorough clinical assessment is important to identify patients that may have risk factors and/or symptoms suggestive of deficiency. These patients should have additional testing of MMA and HC regardless of their B-12 levels. PMID:26807790

High ampicillin resistance in different biotypes and serotypes of Haemophilus influenzae colonizing the nasopharynx of healthy school-going Indian children.

PubMed

Jain, Amita; Kumar, Pradeep; Awasthi, Shally

2006-02-01

Haemophilus influenzae is one of the main causes of otitis media, sinusitis, meningitis, pneumonia and septicaemia in children, and the development of ampicillin resistance in H. influenzae is a cause of serious concern. The aim of the present study was to determine the prevalence of ampicillin resistance in H. influenzae colonizing the nasopharynx of school-going healthy North Indian children, and to compare the distribution of different biotypes and serotype b in this population. A total of 2400 school-going healthy children from 45 rural and 45 urban schools were enrolled. Nasopharyngeal swabs were collected from the children and cultured. H. influenzae was isolated from 1001 (41.7 %) of the 2400 nasopharyngeal swabs collected. All these H. influenzae isolates were biotyped and serotyped, and their antibiotic susceptibility tested. All eight biotypes were present in this population. The most prevalent biotypes were I (19.6 %), II (16.8 %) and III (25.0 %). Of the 1001 isolates, 316 (31.6 %) were H. influenzae type b and 685 (68.4 %) were non-type b H. influenzae, and 22.9 % were resistant to ampicillin, 41.9 % to chloramphenicol, 27.5 % to erythromycin and 67.3 % to co-trimoxazole. Of the 316 H. influenzae type b isolates, 44.0 % were ampicillin resistant, while only 13.1 % non-type b H. influenzae isolates were ampicillin resistant. Of the 229 ampicillin-resistant H. influenzae isolates, 196 (85.6 %) were positive for beta-lactamase; 93.4 % (214/229) were biotypes I, II and III, of which 49 % were biotype I, 27.9 % were type II and 16.6 % were type III. Most of the strains belonging to biotypes III-VIII were ampicillin sensitive. Ampicillin resistance is significantly more common in biotype I and serotype b than in other biotypes and serotypes.

Galvanic deposition and characterization of brushite/hydroxyapatite coatings on 316L stainless steel.

PubMed

Blanda, Giuseppe; Brucato, Valerio; Pavia, Francesco Carfì; Greco, Silvia; Piazza, Salvatore; Sunseri, Carmelo; Inguanta, Rosalinda

2016-07-01

In this work, brushite and brushite/hydroxyapatite (BS, CaHPO4·H2O; HA, Ca10(PO4)6(OH)2) coatings were deposited on 316L stainless steel (316LSS) from a solution containing Ca(NO3)2·4H2O and NH4H2PO4 by a displacement reaction based on a galvanic contact, where zinc acts as sacrificial anode. Driving force for the cementation reaction arises from the difference in the electrochemical standard potentials of two different metallic materials (316LSS and Zn) immersed in an electrolyte, so forming a galvanic contact leading to the deposition of BS/HA on nobler metal. We found that temperature and deposition time affect coating features (morphology, structure, and composition). Deposits were characterized by means of several techniques. The morphology was investigated by scanning electron microscopy, the elemental composition was obtained by X-ray energy dispersive spectroscopy, whilst the structure was identified by Raman spectroscopy and X-ray diffraction. BS was deposited at all investigated temperatures covering the 316LSS surface. At low and moderate temperature, BS coatings were compact, uniform and with good crystalline degree. On BS layers, HA crystals were obtained at 50°C for all deposition times, while at 25°C, its presence was revealed only after long deposition time. Electrochemical studies show remarkable improvement in corrosion resistance. Copyright © 2016 Elsevier B.V. All rights reserved.

46 CFR Table 1 to Part 153 - Summary of Minimum Requirements

Code of Federal Regulations, 2014 CFR

2014-10-01

... Acetochlor A P II NR Open Open A .409 NA Acetone cyanohydrin A S/P II B/3 PV Closed A .238(a), .316, .336, .408, .525, .526, .527, .912(a)(2), .933, .1002, .1004, .1020, .1035 I-D Acetonitrile III S II B/3 PV...), .409, .526, .912(a)(1), .933, .1002(a), .1004 I-D Acrylonitrile B S/P II B/3 PV Closed A .236(a), (c...

46 CFR Table 1 to Part 153 - Summary of Minimum Requirements

Code of Federal Regulations, 2012 CFR

2012-10-01

... Acetochlor A P II NR Open Open A .409 NA Acetone cyanohydrin A S/P II B/3 PV Closed A .238(a), .316, .336, .408, .525, .526, .527, .912(a)(2), .933, .1002, .1004, .1020, .1035 I-D Acetonitrile III S II B/3 PV...), .409, .526, .912(a)(1), .933, .1002(a), .1004 I-D Acrylonitrile B S/P II B/3 PV Closed A .236(a), (c...

46 CFR Table 1 to Part 153 - Summary of Minimum Requirements

Code of Federal Regulations, 2013 CFR

2013-10-01

... Acetochlor A P II NR Open Open A .409 NA Acetone cyanohydrin A S/P II B/3 PV Closed A .238(a), .316, .336, .408, .525, .526, .527, .912(a)(2), .933, .1002, .1004, .1020, .1035 I-D Acetonitrile III S II B/3 PV...), .409, .526, .912(a)(1), .933, .1002(a), .1004 I-D Acrylonitrile B S/P II B/3 PV Closed A .236(a), (c...

Develop and demonstrate manufacturing processes for fabricating graphite filament reinforced polymide (Gr/PI) composite structural elements

NASA Technical Reports Server (NTRS)

Chase, V. A.; Harrison, E. S.

1985-01-01

A study was conducted to assess the merits of using graphite/polyimide, NR-150B2 resin, for structural applications on advanced space launch vehicles. The program was divided into two phases: (1) Fabrication Process Development; and (2) Demonstration Components. The first phase of the program involved the selection of a graphite fiber, quality assurance of the NR-150B2 polyimide resin, and the quality assurance of the graphite/polyimide prepreg. In the second phase of the program, a limited number of components were fabricated before the NR-150B2 resin system was removed from the market by the supplier, Du Pont. The advancement of the NR-150B2 polyimide resin binder was found to vary significantly based on previous time and temperature history during the prepregging operation. Strength retention at 316C (600F) was found to be 50% that of room temperature strength. However, the composite would retain its initial strength after 200 hours exposure at 316C (600F). Basic chemistry studies are required for determining NR-150B2 resin binder quality assurance parameters. Graphite fibers are available that can withstand high temperature cure and postcure cycles.

78 FR 61413 - Self-Regulatory Organizations; Chicago Stock Exchange, Inc.; Notice of Filing and Immediate...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-03

... Change To Adopt a Market Data Revenue Rebates Program September 27, 2013. Pursuant to Section 19(b)(1) of... Fees and Assessments (the ``Fee Schedule'') by adopting Section P to implement the Market Data Revenue... Exchange proposes to amend its Fee Schedule to adopt Section P to implement the Market Data Revenue (``MDR...

9 CFR 317.4 - Labeling approval.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Devices, except for generically approved labeling authorized for use in § 317.5(b). The management of the... carcass ink brands and meat food product ink and burning brands, which comply with parts 312 and 316 of...

77 FR 65366 - Interim Procedures for Considering Requests From the Public for Textile and Apparel Safeguard...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-26

... Promotion Agreement (``U.S.-Colombia TPA''). Title III, Subtitle B, Section 321 through Section 328 of the United States-Colombia Trade Promotion Agreement Implementation Act (``Implementation Act'') [Pub. L. 112... requester showing changes in productivity, utilization of capacity, inventories, exports, wages, employment...

78 FR 31886 - Interim Procedures for Considering Requests From the Public for Textile and Apparel Safeguard...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-28

... Trade Promotion Agreement (``US-Panama TPA''). Title III, Subtitle B, Section 321 through Section 328 of the United States-Panama Trade Promotion Agreement Implementation Act (``Implementation Act'') [Pub. L... changes in productivity, utilization of capacity, inventories, exports, wages, employment, domestic prices...

Evaluation of tantalum 316 stainless steel transition joints

NASA Technical Reports Server (NTRS)

Stoner, D. R.

1972-01-01

Tubular transition joints providing a metallurgically bonded connection between tantalum and 316 stainless steel pipe sections were comparatively evaluated for durability under thermal cycling conditions approximating the operation of a SNAP-8 mercury boiler. Both coextruded and vacuum brazed transition joints of 50mm (2 inch) diameter were tested by thermal cycling 100 times between 730 C and 120 C(1350 F and 250 F) in a high vacuum environment. The twelve evaluated transition joints survived the full test sequence without developing leaks, although liquid penetrant bond line indications eventually developed in all specimens. The brazed transition joints exhibited the best dimensional stability and bond line durability.

10 CFR 712.12 - HRP implementation.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 4 2011-01-01 2011-01-01 false HRP implementation. 712.12 Section 712.12 Energy... Program Procedures § 712.12 HRP implementation. (a) The implementation of the HRP is the responsibility of... by April 22, 2004. (b) The HRP Management Official must: (1) Prepare an initial HRP implementation...

10 CFR 712.12 - HRP implementation.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 4 2010-01-01 2010-01-01 false HRP implementation. 712.12 Section 712.12 Energy... Program Procedures § 712.12 HRP implementation. (a) The implementation of the HRP is the responsibility of... by April 22, 2004. (b) The HRP Management Official must: (1) Prepare an initial HRP implementation...

33 CFR 385.5 - Guidance memoranda.

Code of Federal Regulations, 2010 CFR

2010-07-01

... sources of water will occur as a result of implementation of the Plan (§ 385.36(b)). (b) Special processes..., implementation, and management of one specific individual feature of the Plan, this section does not require... § 385.5 Guidance memoranda. (a) General. (1) Technical guidance for internal management of Corps of...

76 FR 47062 - Approval and Promulgation of Air Quality Implementation Plans; West Virginia; Section 110(a)(2...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-04

... 22, 2008: 110(a)(2)(A), (B), (C), (D)(ii), (E), (F), (G), (H), (J), (K), (L), and (M), or portions... CAA section 110(a)(2)(A), (B), (C), (D)(ii), (E), (F), (G), (H), (J), (K), (L), and (M), or portions... sections 110(a)(2)(A), (B), (C), (D)(ii), (E), (F), (G), (H), (J), (K), (L), and (M), or portions thereof...

Extreme Quantile Estimation in Binary Response Models

DTIC Science & Technology

1990-03-01

in Cancer Research," Biometria , VoL 66, pp. 307-316. Hsi, B.P. [1969], ’The Multiple Sample Up-and-Down Method in Bioassay," Journal of the American...New Method of Estimation," Biometria , VoL 53, pp. 439-454. Wetherill, G.B. [1976], Sequential Methods in Statistics, London: Chapman and Hall. Wu, C.FJ

Excited Atomic Bromine Energy Transfer and Quenching Mechanisms

DTIC Science & Technology

1993-08-01

slope, m, and intercept, b, given as MBr 2 ] + k (3.16) b= 1 By collecting the Br* emission intensity as a function of added buffer gas concentration... submerged in an H20 ice and NaCl salt slurrie. The temperature is monitored with a temperature probe to insure that it is below 00 C. Then with LN 2

Development of strontium and magnesium substituted porous hydroxyapatite/poly(3,4-ethylenedioxythiophene) coating on surgical grade stainless steel and its bioactivity on osteoblast cells.

PubMed

Gopi, D; Ramya, S; Rajeswari, D; Surendiran, M; Kavitha, L

2014-02-01

The present study deals with the successful development of bilayer coatings by electropolymerisation of poly(3,4-ethylenedioxythiophene) (PEDOT) on surgical grade stainless steel (316L SS) followed by the electrodeposition of strontium (Sr) and magnesium (Mg) substituted porous hydroxyapatite (Sr, Mg-HA). The bilayer coatings were characterised by Fourier transform infrared spectroscopy (FT-IR) and high resolution scanning electron microscopy (HRSEM). Corrosion resistance of the obtained coatings was investigated in Ringer's solution by electrochemical techniques and the results were in good agreement with those obtained from chemical analysis, namely inductively coupled plasma atomic emission spectrometry (ICP-AES). Also, the mechanical and biological properties of the bilayer coatings were analyzed. From the obtained results it was evident that the PEDOT/Sr, Mg-HA bilayer exhibited greater adhesion strength than the Sr, Mg-HA coated 316L SS. In vitro cell adhesion test of the Sr, Mg-HA coating on PEDOT coated specimen is found to be more bioactive compared to that of the single substituted hydroxyapatite (Sr or Mg-HA) on the PEDOT coated 316L SS. Thus, the PEDOT/Sr, Mg-HA bilayer coated 316L SS can serve as a prospective implant material for biomedical applications. Copyright © 2013 Elsevier B.V. All rights reserved.

Controlling the electrodeposition, morphology and structure of hydroxyapatite coating on 316L stainless steel.

PubMed

Thanh, Dinh Thi Mai; Nam, Pham Thi; Phuong, Nguyen Thu; Que, Le Xuan; Anh, Nguyen Van; Hoang, Thai; Lam, Tran Dai

2013-05-01

Hydroxyapatite (HAp) coatings were prepared on 316L stainless steel (316LSS) substrates by electrochemical deposition in the solutions containing Ca(NO3)2·4H2O and NH4H2PO4 at different electrolyte concentrations. Along with the effect of precursor concentration, the influence of temperature and H2O2 content on the morphology, structure and composition of the coating was thoroughly discussed with the help of X-ray diffraction (XRD), Scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectra. The in vitro tests in simulated body fluids (SBF) were carried out and then the morphological and structural changes were estimated by SEM and electrochemical techniques (open circuit potential, polarization curves, Nyquist and Bode spectra measurements). Being simple and cost-effective, this method is advantageous for producing HAp implant materials with good properties/characteristics, aiming towards in vivo biomedical applications. Copyright © 2013 Elsevier B.V. All rights reserved.

78 FR 72033 - Approval and Promulgation of Implementation Plans; Florida: General Requirements and Gasoline...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-02

... in section 553(b)(3)(B) of the Administrative Procedure Act (APA) which, upon finding ``good cause.... EPA also finds that there is good cause under APA section 553(d)(3) for this correction to become effective on the date of publication of this action. Section 553(d)(3) of the APA allows an effective date...

78 FR 67307 - Approval and Promulgation of Implementation Plans; Tennessee; Infrastructure Requirements for the...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-12

...'' exemption in section 553(b)(3)(B) of the Administrative Procedure Act (APA) which, upon finding ``good cause.... EPA also finds that there is good cause under APA section 553(d)(3) for this correction to become effective on the date of publication of this action. Section 553(d)(3) of the APA allows an effective date...

33 CFR 332.1 - Purpose and general considerations.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Protection Agency on the Determination of Mitigation Under the Clean Water Act Section 404(b)(1) Guidelines... Water Act (33 U.S.C. 1344) and/or sections 9 or 10 of the Rivers and Harbors Act of 1899 (33 U.S.C. 401, 403). This part implements section 314(b) of the 2004 National Defense Authorization Act (Pub. L. 108...

27 CFR 70.444 - Importation of arms, ammunition, and implements of war.

Code of Federal Regulations, 2010 CFR

2010-04-01

..., ammunition, and implements of war. 70.444 Section 70.444 Alcohol, Tobacco Products and Firearms ALCOHOL AND... implements of war. Part 47 of title 27 CFR implements Executive Order 11958 and supplements the import... implements of war, (b) Import permit requirements, (c) Import certification and verification, (d) Import...

Effects of the NOP receptor agonist Ro65-6570 on the acquisition of opiate- and psychostimulant-induced conditioned place preference in rats.

PubMed

Rutten, Kris; De Vry, Jean; Bruckmann, Walter; Tzschentke, Thomas M

2010-10-25

Activation of the Nociceptin/Orphanin FQ (NOP) receptor may have anti-abuse effects. The present study examined the consequence of NOP receptor activation on the rewarding effect of opiates and psychostimulants in the conditioned place preference task in rats. First, the motivational effect of the NOP receptor agonists Ro64-6198 (0.316-3.16 mg/kg i.p.) and Ro65-6570 (1-10mg/kg i.p.) when administered alone, was assessed. Ro65-6570 was selected for further drug combination studies since, unlike Ro64-6198, it was devoid of an intrinsic motivational effect. Next, the minimal effective dose to induce reward for the opiates heroin (0.1-3.16 mg/kg i.p.), morphine (1-10mg/kg i.p.), hydrocodone (0.316-10mg/kg i.p.), tilidine (1-31.6 mg/kg i.p.), hydromorphone (0.1-10mg/kg i.p.), and oxycodone (0.0316-10mg/kg i.p.), as well as for the psychostimulants cocaine (3.16-31.6 mg/kg i.p.) and dexamphetamine (0.316-3.16 mg/kg i.p.) in combination with Ro 65-6570 (0 or 3.16 mg/kg i.p.) was determined. All drugs produced conditioned place preference, and for opiates and cocaine, but not for dexamphetamine, the minimal effective dose was higher when combined with Ro65-6570 (3.16 mg/kg i.p.). Attenuation of the rewarding effect of tilidine (3.16 mg/kg i.p.) and oxycodone (1mg/kg i.p.) by Ro65-6570 (3.16 mg/kg i.p.) could be reversed by pre-treatment with the NOP receptor antagonist J-113397 (4.64 mg/kg i.p.), suggesting that the attenuating effect of Ro65-6570 on opiates is due to activation of the NOP receptor. Taken together, the present study suggests that activation of NOP receptors effectively attenuates the rewarding effect of opiates, but may be less effective in reducing psychostimulant-induced reward. Copyright © 2010 Elsevier B.V. All rights reserved.

Mutational analysis of Kex2 recognition sites and a disulfide bond in tannase from Aspergillus oryzae.

PubMed

Koseki, Takuya; Otsuka, Motohiro; Mizuno, Toshiyuki; Shiono, Yoshihito

2017-01-22

Aspergillus oryzae tannase (AoTanA), which contains two Kex2 recognition sites at positions Arg311 and Arg316, consists of two subunits that are generated by the cleavage of tannase gene product by the Kex2 protease. Based on the crystal structure of feruloyl esterase from Aspergillus oryzae (AoFaeB), which has been classified as a member of the fungal tannase family, the catalytic triad residues of AoTanA are predicted to be Ser195, Asp455, and His501, with the serine and histidine residues brought together by a disulfide bond of the neighboring cysteines, Cys194 and Cys502. In this study, we investigated the functional role of the Kex2 recognition sites and disulfide bond between the neighboring cysteines in AoTanA. We constructed a double variant (R311A/R316A), a seven amino-acid deletion variant of region Lys310-Arg316 (ΔKR), and two single variants (C194A and C502A). While the R311A/R316A variant exhibited the two bands similar to wild type by SDS-PAGE after treatment with endoglycosidase H, the ΔKR variant exhibited only one band. R311A/R316A variation had no effect on tannase activity and stability. Meanwhile, the ΔKR variant exhibited higher activity compared to the wild-type. The activities of the C194A and C502A variants decreased considerably (<0.24% of the wild-type) toward methyl gallate. Copyright © 2016 Elsevier Inc. All rights reserved.

40 CFR 86.320-79 - Analyzer bench check.

Code of Federal Regulations, 2010 CFR

2010-07-01

... (CONTINUED) CONTROL OF EMISSIONS FROM NEW AND IN-USE HIGHWAY VEHICLES AND ENGINES Emission Regulations for...) Water rejection ratio, NDIR analyzers only (see §§ 86.316(c) and 86.318 (b)(5). (7) CO2 rejection ratio...

Surface Texturing-Plasma Nitriding Duplex Treatment for Improving Tribological Performance of AISI 316 Stainless Steel

PubMed Central

Lin, Naiming; Liu, Qiang; Zou, Jiaojuan; Guo, Junwen; Li, Dali; Yuan, Shuo; Ma, Yong; Wang, Zhenxia; Wang, Zhihua; Tang, Bin

2016-01-01

Surface texturing-plasma nitriding duplex treatment was conducted on AISI 316 stainless steel to improve its tribological performance. Tribological behaviors of ground 316 substrates, plasma-nitrided 316 (PN-316), surface-textured 316 (ST-316), and duplex-treated 316 (DT-316) in air and under grease lubrication were investigated using a pin-on-disc rotary tribometer against counterparts of high carbon chromium bearing steel GCr15 and silicon nitride Si3N4 balls. The variations in friction coefficient, mass loss, and worn trace morphology of the tested samples were systemically investigated and analyzed. The results showed that a textured surface was formed on 316 after electrochemical processing in a 15 wt % NaCl solution. Grooves and dimples were found on the textured surface. As plasma nitriding was conducted on a 316 substrate and ST-316, continuous and uniform nitriding layers were successfully fabricated on the surfaces of the 316 substrate and ST-316. Both of the obtained nitriding layers presented thickness values of more than 30 μm. The nitriding layers were composed of iron nitrides and chromium nitride. The 316 substrate and ST-316 received improved surface hardness after plasma nitriding. When the tribological tests were carried out under dry sliding and grease lubrication conditions, the tested samples showed different tribological behaviors. As expected, the DT-316 samples revealed the most promising tribological properties, reflected by the lowest mass loss and worn morphologies. The DT-316 received the slightest damage, and its excellent tribological performance was attributed to the following aspects: firstly, the nitriding layer had high surface hardness; secondly, the surface texture was able to capture wear debris, store up grease, and then provide continuous lubrication. PMID:28773996

46 CFR Table 1 to Part 153 - Summary of Minimum Requirements

Code of Federal Regulations, 2011 CFR

2011-10-01

... Acetochlor A P II NR Open Open A .409 NA Acetone cyanohydrin A S/P II B/3 PV Closed A .238(a), .316, .336... Restr A .409, .525, .526, .1020 I-D Acrylamide solution (50% or less) D S II NR Open Closed NSR .409... .526 I-D Alachlor B S/P III NR Open Open A, C .238(a), .409, .440, .488, .908(a), (b) NA Alcohol (C6...

Youthful High School Noncompleters: Enhancing Opportunities for Employment and Education. Information Series No. 316.

ERIC Educational Resources Information Center

Martin, Larry G.

High school noncompletion is a complex problem that requires complex solutions that schools are often inhibited from implementing quickly. Alternative educational services are often necessary for students who are able to complete high school but who find school an unrewarding place in which to learn. A loose network of public and private programs…

Biocorrosion of 316LV steel used in oral cavity due to Desulfotomaculum nigrificans bacteria.

PubMed

Mystkowska, Joanna; Ferreira, Jose A; Leszczyńska, Katarzyna; Chmielewska, Sylwia; Dąbrowski, Jan Ryszard; Wieciński, Piotr; Kurzydłowski, Krzysztof Jan

2017-01-01

Corrosion processes of metallic biomaterials in the oral cavity pose a significant limitation to the life and reliable functioning of dental materials. In this article, the influence of environment bacteria Desulfotomaculum nigrificans sulfate reducing bacteria on the corrosion processes of 316LV steel was assessed. After 14 and 28 days of contact of the material with the bacterial environment, the surfaces of the tested biomaterial were observed by means of confocal scanning laser microscopy, and their chemical composition was studied using X-Ray Photoelectron Spectrometry and a scanning transmission electron microscopy. Corrosive changes, the presence of sulfur (with atomic concentration of 0.5%) on the surface of the biomaterial and the presence of a thin oxide layer (thickness of ∼20 nm) under the surface of the steel were observed. This corrosion layer with significant size reduction of grains was characterized by an increased amount of oxygen (18% mas., p < 0.001) in comparison to untreated 316LV steel (where oxygen concentration - 10% mas.). Image analysis conducted using APHELION software indicated that corrosion pits took up ∼2.8% of the total tested surface. The greatest number of corrosion pits had a surface area within the range of 100-200 μm 2 . © 2015 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 105B: 222-229, 2017. © 2015 Wiley Periodicals, Inc.

78 FR 43768 - Airworthiness Directives; Learjet Inc. Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-22

..., KS 67209-2942; telephone 316-946-2000; fax 316-946-2220; email [email protected] ; Internet... 67209; phone: 316-946-4156; fax: 316-946-4107; email: [email protected] . SUPPLEMENTARY INFORMATION... Airport, Wichita, Kansas 67209; phone: 316-946-4156; fax: 316-946- 4107; email: [email protected] . (2...

75 FR 63064 - Airworthiness Directives; Learjet Inc. Model 45 Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-14

...-2942; telephone 316-946-2000; fax 316-946-2220; e-mail [email protected] ; Internet http://www...; telephone (316) 946-4135; fax (316) 946-4107; e-mail [email protected] . SUPPLEMENTARY INFORMATION... Road, Room 100, Mid-Continent Airport, Wichita, Kansas 67209; telephone (316) 946- 4135; fax (316) 946...

77 FR 24349 - Airworthiness Directives; Learjet Inc. Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-24

..., Kansas 67209-2942; telephone 316-946-2000; fax 316-946-2220; email [email protected] ; Internet... 100, Mid- Continent Airport, Wichita, Kansas 67209; phone: 316-946-4135; fax: 316-946-4107; email... Road, Room 100, Mid-Continent Airport, Wichita, Kansas 67209; phone: 316- 946-4135; fax: 316-946-4107...

76 FR 78520 - Airworthiness Directives; Learjet Inc. Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-19

... Learjet, Inc., One Learjet Way, Wichita, Kansas 67209-2942; telephone (316) 946-2000; fax (316) 946-2220... Road, Room 100, Mid-Continent Airport, Wichita, KS 67209; phone: (316) 946-4152; fax: (316) 946-4129... 100, Mid-Continent Airport, Wichita, KS 67209; phone: (316) 946-4152; fax: (316) 946-4129; email: paul...

76 FR 74010 - Airworthiness Directives; Learjet Inc. Model 60 Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-30

... (316) 946-2000; fax (316) 946-2220; email [email protected] ; Internet http://www.bombardier...- Continent Airport, Wichita, Kansas 67209; phone: (316) 946-4135; fax: (316) 946-4107; email: james.galstad...: (316) 946-4135; fax: (316) 946-4107; email: [email protected] . (2) For service information...

46 CFR 308.546 - Standard optional endorsement No. 1-A, Form MA-316-A.

Code of Federal Regulations, 2010 CFR

2010-10-01

.... 308.546 Section 308.546 Shipping MARITIME ADMINISTRATION, DEPARTMENT OF TRANSPORTATION EMERGENCY OPERATIONS WAR RISK INSURANCE War Risk Cargo Insurance Iii-Facultative War Risk Cargo Insurance § 308.546... from the American War Risk Agency or MARAD. ...

46 CFR 308.546 - Standard optional endorsement No. 1-A, Form MA-316-A.

Code of Federal Regulations, 2011 CFR

2011-10-01

.... 308.546 Section 308.546 Shipping MARITIME ADMINISTRATION, DEPARTMENT OF TRANSPORTATION EMERGENCY OPERATIONS WAR RISK INSURANCE War Risk Cargo Insurance Iii-Facultative War Risk Cargo Insurance § 308.546... from the American War Risk Agency or MARAD. ...

46 CFR 308.546 - Standard optional endorsement No. 1-A, Form MA-316-A.

Code of Federal Regulations, 2013 CFR

2013-10-01

.... 308.546 Section 308.546 Shipping MARITIME ADMINISTRATION, DEPARTMENT OF TRANSPORTATION EMERGENCY OPERATIONS WAR RISK INSURANCE War Risk Cargo Insurance Iii-Facultative War Risk Cargo Insurance § 308.546... from the American War Risk Agency or MARAD. ...

46 CFR 308.546 - Standard optional endorsement No. 1-A, Form MA-316-A.

Code of Federal Regulations, 2012 CFR

2012-10-01

.... 308.546 Section 308.546 Shipping MARITIME ADMINISTRATION, DEPARTMENT OF TRANSPORTATION EMERGENCY OPERATIONS WAR RISK INSURANCE War Risk Cargo Insurance Iii-Facultative War Risk Cargo Insurance § 308.546... from the American War Risk Agency or MARAD. ...

76 FR 14419 - Exercise of Authority Under Section 212(d)(3)(B)(i) of the Immigration and Nationality Act

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-16

...)(3)(B)(i) of the Immigration and Nationality Act AGENCY: Office of the Secretary, DHS. ACTION: Notice... authority granted to me by section 212(d)(3)(B)(i) of the Immigration and Nationality Act (INA), 8 U.S.C.... Implementation of this determination will be made by U.S. Citizenship and Immigration Services (USCIS), in...

78 FR 18529 - Airworthiness Directives; Learjet Inc. Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-27

... Learjet Way, Wichita, KS 67209-2942; telephone 316- 946-2000; fax 316-946-2220; email [email protected] 100, Mid-Continent Airport, Wichita, Kansas 67209; phone: 316-946-4156; fax: 316-946-4107; email: adam... Airport, Wichita, Kansas 67209; phone: 316-946-4156; fax: 316-946- 4107; email: [email protected] . (2...

78 FR 39574 - Airworthiness Directives; Learjet Inc. Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-02

...., One Learjet Way, Wichita, KS 67209-2942; telephone 316- 946-2000; fax 316-946-2220; email [email protected] Continent Airport, Wichita, KS 67209; phone: 316-946-4120; fax: 316- 946-4107; email: [email protected], Wichita, KS 67209; phone: 316-946- 4120; fax: 316-946-4107; email: [email protected] . (l) Material...

The structural and bio-corrosion barrier performance of Mg-substituted fluorapatite coating on 316L stainless steel human body implant

NASA Astrophysics Data System (ADS)

Sharifnabi, A.; Fathi, M. H.; Eftekhari Yekta, B.; Hossainalipour, M.

2014-01-01

In this study, Mg-substituted fluorapatite coatings were deposited on medical grade AISI 316L stainless steel via sol-gel dip coating method. Phase composition, crystallite size and degree of crystallinity of the obtained coatings were evaluated by X-ray diffraction (XRD) analysis. Fourier transform infrared (FTIR) spectroscopy was also used to evaluate functional groups of the obtained coatings. The surface morphology and cross-section of the final coatings were studied using scanning electron microscopy (SEM) and energy dispersive X-ray (EDX) spectroscopy was used to determine elemental chemical composition of the obtained coatings. In order to determine and compare the corrosion behavior of uncoated and Mg-substituted fluorapatite coated 316L stainless steel, electrochemical potentiodynamic polarization tests were performed in physiological solutions at 37 ± 1 °C. Moreover, the released metallic ions from uncoated and coated substrates were measured by inductively coupled plasma-optical emission spectrometry (ICP-OES) within 2 months of immersing in Ringer's solution at 36.5 ± 1 °C as an indication of biocompatibility. The results showed that fluoride and magnesium were successfully incorporated into apatite lattice structure and the prepared coatings were nanostructured with crystallinity of about 70%. Obtained coatings were totally crack-free and uniform and led to decrease in corrosion current densities of 316L stainless steel in physiological solutions. In addition, coated sample released much less ions such as Fe, Cr and Ni in physiological media. Therefore, it was concluded that Mg-substituted fluorapatite coatings could improve the corrosion resistance and biocompatibility of 316L stainless steel human body implants.

Title: Detection of a 31.6 s pulse period for the supernova impostor SN 2010da in NGC 300, observed in ULX state

NASA Astrophysics Data System (ADS)

Carpano, S.; Haberl, F.; Maitra, C.

2018-01-01

The supernova impostor SN 2010da located in NGC 300, later identified as a likely Supergiant B[e] High-mass X-ray binary (Lau et al. 2016, ApJ, 830, 142 and Villar et al. 2016, ApJ, 830, 11), was observed in outburst during two long (139 and 82 ks) XMM-Newton observations performed on 2016 December 17 to 20. We report the discovery of a strong periodic modulation in the X-ray flux with a pulse period of 31.6 s and a very rapid spin-up, and confirm therefore that the compact object is a neutron star.

Development of Automated Testing Tools for Traffic Control Signals and Devices : [Summary

DOT National Transportation Integrated Search

2012-01-01

Section 316.0745, Florida : Statutes, requires FDOT to : develop and publish specifi : cations for traffi c control : signals and devices and certify : they meet these specifi : cations before they can be : sold or purchased as part : of a traffi c c...

18 CFR 46.2 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-04-01

... plant equipment (316, 325, 335 and 346); Water wheels, turbines and generators (333); Fuel holders... 18 Conservation of Power and Water Resources 1 2014-04-01 2014-04-01 false Definitions. 46.2 Section 46.2 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY COMMISSION, DEPARTMENT OF...

18 CFR 46.2 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-04-01

... plant equipment (316, 325, 335 and 346); Water wheels, turbines and generators (333); Fuel holders... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false Definitions. 46.2 Section 46.2 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY COMMISSION, DEPARTMENT OF...

18 CFR 46.2 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-04-01

... plant equipment (316, 325, 335 and 346); Water wheels, turbines and generators (333); Fuel holders... 18 Conservation of Power and Water Resources 1 2012-04-01 2012-04-01 false Definitions. 46.2 Section 46.2 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY COMMISSION, DEPARTMENT OF...

18 CFR 46.2 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-04-01

... plant equipment (316, 325, 335 and 346); Water wheels, turbines and generators (333); Fuel holders... 18 Conservation of Power and Water Resources 1 2013-04-01 2013-04-01 false Definitions. 46.2 Section 46.2 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY COMMISSION, DEPARTMENT OF...

18 CFR 46.2 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-04-01

... plant equipment (316, 325, 335 and 346); Water wheels, turbines and generators (333); Fuel holders... 18 Conservation of Power and Water Resources 1 2011-04-01 2011-04-01 false Definitions. 46.2 Section 46.2 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY COMMISSION, DEPARTMENT OF...

75 FR 69141 - Submission for Review: Revision of an Existing Information Collection, USAJOBS

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-10

...). 5 CFR 315.611. 5. Veterans Recruitment Appointment (VRA). 5 CFR 307. 5 CFR 316.302(b)(2) Term... OF 612 is incorporated in the online Resume Builder on the USAJOBS Web site. The need to maintain the...

[Effect of resin infiltration on microhardness of artificial caries lesions].

PubMed

Liu, Yonghong; Deng, Hui; Tang, Longmei; Zhang, Zhiyong

2015-12-01

To compare the changes of enamel surface and cross-sectional microhardness of artificial caries immediately and after the twice demineralization through coating resin infiltration, fluoride varnish and fissure sealant. A total of forty bovine lower incisors enamel samples with artificial caries lesions by the demineralization liquid were used in the experiment. The specimens were then randomly divided into four groups as group A(resin infiltration), B(fluoride varnish), C (fissure sealant), D(control), 10 specimens in each group. The samples were sectioned vertically into two halves through the centre. One half of each sample the surface and cross-sectional microhardness was measured. The other half was put into demineralization liquid for 14 days, then the surface and cross-sectional microhardness was measured again. The cross section morphology of the samples was observed by scanning electron microscope. The surface of enamel had the highest microhardness value, and with the increase of cross- sectional depth, the microhardness value declined gradually. Variance analysis showed that the difference was statistically significant in the cross-section of different depth among the four groups(P<0.05). The microhardness values of the surface and the cross- section at 40 µm of each group in immediate measure showed the values were significantly higher in group A, B and C than in group D. There was no significant difference in the microhardness value of cross-section at 80 µm between group A[(324 ± 17) kg/mm(2)] and group C[(316 ± 20) kg/mm(2)], but they were significantly higher than group D. There was no significant difference between group B[(303 ± 13) kg/mm(2)] and group D[(294 ± 23) kg/mm(2)]. At 120 µm level, the microhardness value of group A was significantly higher than those of the other three groups. After the twice demineralization, the enamel surface microhardness value of the specimens was the same as the first measurement. In the cross-section at 40 µm level, the microhardness value was equal to the value of cross-section at 80 µm level of the first measurement. In the cross- section at 80 µm and 120 µm level, the microhardness value of group A was significantly higher than those of the other three groups. Resin infiltration can effectively strengthen microhardness of enamel surface and cross-section of different depth of artificial caries.

32 CFR 321.14 - DSS implementation policies.

Code of Federal Regulations, 2014 CFR

2014-07-01

...) PRIVACY PROGRAM DEFENSE SECURITY SERVICE PRIVACY PROGRAM § 321.14 DSS implementation policies. (a) General... matters of particular concern to the Defense Security Service. (b) Privacy Act rules application. Any... 32 National Defense 2 2014-07-01 2014-07-01 false DSS implementation policies. 321.14 Section 321...

32 CFR 321.14 - DSS implementation policies.

Code of Federal Regulations, 2013 CFR

2013-07-01

...) PRIVACY PROGRAM DEFENSE SECURITY SERVICE PRIVACY PROGRAM § 321.14 DSS implementation policies. (a) General... matters of particular concern to the Defense Security Service. (b) Privacy Act rules application. Any... 32 National Defense 2 2013-07-01 2013-07-01 false DSS implementation policies. 321.14 Section 321...

32 CFR 321.14 - DSS implementation policies.

Code of Federal Regulations, 2012 CFR

2012-07-01

...) PRIVACY PROGRAM DEFENSE SECURITY SERVICE PRIVACY PROGRAM § 321.14 DSS implementation policies. (a) General... matters of particular concern to the Defense Security Service. (b) Privacy Act rules application. Any... 32 National Defense 2 2012-07-01 2012-07-01 false DSS implementation policies. 321.14 Section 321...

77 FR 27626 - Approval and Promulgation of Implementation Plans; Commonwealth of Kentucky; Regional Haze State...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-11

... section 553(b)(3)(B) of the Administrative Procedure Act (APA) which, upon finding ``good cause... related to the regional haze SIP revisions. EPA also finds that there is good cause under APA section 553...(d)(3) of the APA allows an effective date less than 30 days after publication ``as otherwise...

75 FR 62002 - Airworthiness Directives; Pilatus Aircraft Ltd. Models PC-6, PC-6-H1, PC-6-H2, PC-6/350, PC-6/350...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-07

... Limitations Section (ALS). For PC-6 models other than B2-H2 and B2- H4, no ALS at all is included in the AMM... and B2-H4 models. For PC-6 models other than B2-H2 and B2-H4, a new ALS document has been implemented... Limitations Section (ALS). For PC-6 models other than B2-H2 and B2- H4, no ALS at all is included in the AMM...

Development of the Ni-based Metallic glassy bipolar plates for Proton Exchange Membrane Fuel Cell (PEMFC)

NASA Astrophysics Data System (ADS)

Yamaura, S.; Yokoyama, M.; Kimura, H. M.; Inoue, A.

2009-01-01

Alloy optimization in the Ni80-xCrxP16B4 (x = 9-30 at%) alloy system was conducted in order to achieve low Tg, Tx and a large ΔTx. From this study, the Ni65Cr15P16B4 glassy alloy was found to be the optimal alloy. The static and potentiodynamic corrosion behaviours of this alloy were measured. As a result of polarization measurements, it was found that the current density of the non-polished glassy alloy sample was smaller than that of a SUS316L sample. By contrast, the current density of the surface-polished glassy sample was slightly larger than that of the SUS316L sample in the voltage range of 0.3-0.8 V. A bipolar plate was successfully produced by hot-pressing the glassy alloy sheet in a supercooled liquid state. The I-V characteristics of a single cell with the glassy bipolar plates were measured.

Elucidating the Relations Between Monotonic and Fatigue Properties of Laser Powder Bed Fusion Stainless Steel 316L

NASA Astrophysics Data System (ADS)

Zhang, Meng; Sun, Chen-Nan; Zhang, Xiang; Goh, Phoi Chin; Wei, Jun; Li, Hua; Hardacre, David

2018-03-01

The laser powder bed fusion (L-PBF) technique builds parts with higher static strength than the conventional manufacturing processes through the formation of ultrafine grains. However, its fatigue endurance strength σ f does not match the increased monotonic tensile strength σ b. This work examines the monotonic and fatigue properties of as-built and heat-treated L-PBF stainless steel 316L. It was found that the general linear relation σ f = mσ b for describing conventional ferrous materials is not applicable to L-PBF parts because of the influence of porosity. Instead, the ductility parameter correlated linearly with fatigue strength and was proposed as the new fatigue assessment criterion for porous L-PBF parts. Annealed parts conformed to the strength-ductility trade-off. Fatigue resistance was reduced at short lives, but the effect was partially offset by the higher ductility such that comparing with an as-built part of equivalent monotonic strength, the heat-treated parts were more fatigue resistant.

77 FR 36481 - Methodological Change for Implementation of Section 772(c)(2)(B) of the Tariff Act of 1930, as...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-19

... DEPARTMENT OF COMMERCE International Trade Administration Methodological Change for Implementation..., the Department of Commerce (``the Department'') will implement a methodological change to reduce... administrative reviews involving merchandise from the PRC and Vietnam. Methodological Change In antidumping duty...

76 FR 44279 - Implementation of Section 304 of the Telecommunications Act of 1996: Commercial Availability of...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-25

... Availability of Navigation Devices; Compatibility Between Cable Systems and Consumer Electronics Equipment... electronics equipment. DATES: The amendments to 47 CFR 76.1205(b)(1), 76.1205(b)(1)(i), 76.1205(b)(2), 76.1205...

16 CFR 316.5 - Prohibition on charging a fee or imposing other requirements on recipients who wish to opt out.

Code of Federal Regulations, 2011 CFR

2011-01-01

... except sending a reply electronic mail message or visiting a single Internet Web page, in order to: (a) Use a return electronic mail address or other Internet-based mechanism, required by 15 U.S.C. 7704(a... (b) Have such a request honored as required by 15 U.S.C. 7704(a)(3)(B) and (a)(4). ...

42 CFR 425.316 - Monitoring of ACOs.

Code of Federal Regulations, 2013 CFR

2013-10-01

... quality measurement data reported by the ACO as well as aggregate annual and quarterly reports. (ii... described in paragraph (a)(2) of this section (as appropriate) to identify trends and patterns suggesting... quality performance standards or fails to report on one or more quality measures, in addition to actions...

42 CFR 425.316 - Monitoring of ACOs.

Code of Federal Regulations, 2014 CFR

2014-10-01

... quality measurement data reported by the ACO as well as aggregate annual and quarterly reports. (ii... described in paragraph (a)(2) of this section (as appropriate) to identify trends and patterns suggesting... quality performance standards or fails to report on one or more quality measures, in addition to actions...

42 CFR 425.316 - Monitoring of ACOs.

Code of Federal Regulations, 2012 CFR

2012-10-01

... quality measurement data reported by the ACO as well as aggregate annual and quarterly reports. (ii... described in paragraph (a)(2) of this section (as appropriate) to identify trends and patterns suggesting... quality performance standards or fails to report on one or more quality measures, in addition to actions...

27 CFR 555.207 - Construction of type 1 magazines.

Code of Federal Regulations, 2010 CFR

2010-04-01

...) Fabricated metal wall construction. Metal wall construction is to consist of sectional sheets of steel or... constructed of, or covered with, a nonsparking material. (3) Wood frame wall construction. The exterior of... necessary for ventilation. (ii) A fabricated metal roof constructed of 3/16-inch plate steel lined with four...

27 CFR 555.207 - Construction of type 1 magazines.

Code of Federal Regulations, 2011 CFR

2011-04-01

...) Fabricated metal wall construction. Metal wall construction is to consist of sectional sheets of steel or... constructed of, or covered with, a nonsparking material. (3) Wood frame wall construction. The exterior of... necessary for ventilation. (ii) A fabricated metal roof constructed of 3/16-inch plate steel lined with four...

Mechanical and physical behavior of newly developed functionally graded materials and composites of stainless steel 316L with calcium silicate and hydroxyapatite.

PubMed

Ataollahi Oshkour, Azim; Pramanik, Sumit; Mehrali, Mehdi; Yau, Yat Huang; Tarlochan, Faris; Abu Osman, Noor Azuan

2015-09-01

This study aimed to investigate the structural, physical and mechanical behavior of composites and functionally graded materials (FGMs) made of stainless steel (SS-316L)/hydroxyapatite (HA) and SS-316L/calcium silicate (CS) employing powder metallurgical solid state sintering. The structural analysis using X-ray diffraction showed that the sintering at high temperature led to the reaction between compounds of the SS-316L and HA, while SS-316L and CS remained intact during the sintering process in composites of SS-316L/CS. A dimensional expansion was found in the composites made of 40 and 50 wt% HA. The minimum shrinkage was emerged in 50 wt% CS composite, while the maximum shrinkage was revealed in samples with pure SS-316L, HA and CS. Compressive mechanical properties of SS-316L/HA decreased sharply with increasing of HA content up to 20 wt% and gradually with CS content up to 50 wt% for SS-316L/CS composites. The mechanical properties of the FGM of SS-316L/HA dropped with increase in temperature, while it was improved for the FGM of SS-316L/CS with temperature enhancement. It has been found that the FGMs emerged a better compressive mechanical properties compared to both the composite systems. Therefore, the SS-316L/CS composites and their FGMs have superior compressive mechanical properties to the SS-316L/HA composites and their FGMs and also the newly developed FGMs of SS-316L/CS with improved mechanical and enhanced gradation in physical and structural properties can potentially be utilized in the components with load-bearing application. Copyright © 2015 Elsevier Ltd. All rights reserved.

40 CFR 86.320-79 - Analyzer bench check.

Code of Federal Regulations, 2012 CFR

2012-07-01

...)). (3) Noise (see § 86.315(c)). (4) Zero drift (see § 86.315(d)). (5) Span drift (see § 86.315(e)). (6) Water rejection ratio, NDIR analyzers only (see §§ 86.316(c) and 86.318 (b)(5). (7) CO2 rejection ratio...

40 CFR 86.320-79 - Analyzer bench check.

Code of Federal Regulations, 2011 CFR

2011-07-01

...)). (3) Noise (see § 86.315(c)). (4) Zero drift (see § 86.315(d)). (5) Span drift (see § 86.315(e)). (6) Water rejection ratio, NDIR analyzers only (see §§ 86.316(c) and 86.318 (b)(5). (7) CO2 rejection ratio...

40 CFR 86.320-79 - Analyzer bench check.

Code of Federal Regulations, 2013 CFR

2013-07-01

...)). (3) Noise (see § 86.315(c)). (4) Zero drift (see § 86.315(d)). (5) Span drift (see § 86.315(e)). (6) Water rejection ratio, NDIR analyzers only (see §§ 86.316(c) and 86.318 (b)(5). (7) CO2 rejection ratio...

76 FR 23169 - Airworthiness Directives; DG Flugzeugbau GmbH Glaser-Dirks Model DG-808C Gliders

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-26

... Directives; DG Flugzeugbau GmbH Glaser-Dirks Model DG-808C Gliders AGENCY: Federal Aviation Administration... applies to DG Flugzeugbau GmbH Glaser-Dirks Models DG-808C gliders, serial numbers 8-316 B 216 X 1 through...

75 FR 38941 - Airworthiness Directives; Learjet Inc. Model 45 Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-07

..., Wichita, Kansas 67209-2942; telephone 316-946-2000; fax 316-946-2220; e-mail [email protected] Road, Room 100, Mid-Continent Airport, Wichita, Kansas 67209; telephone (316) 946-4135; fax (316) 946...) 946-4135; fax (316) 946-4107. (2) To request a different method of compliance or a different...

Surface modification of investment cast-316L implants: microstructure effects.

PubMed

El-Hadad, Shimaa; Khalifa, Waleed; Nofal, Adel

2015-03-01

Artificial femur stem of 316L stainless steel was fabricated by investment casting using vacuum induction melting. Different surface treatments: mechanical polishing, thermal oxidation and immersion in alkaline solution were applied. Thicker hydroxyapatite (HAP) layer was formed in the furnace-oxidized samples as compared to the mechanically polished ones. The alkaline treatment enhanced the precipitation of HAP on the samples. It was also observed that the HAP precipitation responded differently to the different phases of the microstructure. The austenite phase was observed to have more homogeneous and smoother layer of HAP. In addition, the growth of HAP was sometimes favored on the austenite phase rather than on ferrite phase. Copyright © 2014 Elsevier B.V. All rights reserved.

First report on extended-spectrum beta-lactamase (ESBL) producing Escherichia coli from European free-tailed bats (Tadarida teniotis) in Portugal: A one-health approach of a hidden contamination problem.

PubMed

Garcês, Andreia; Correia, Susana; Amorim, Francisco; Pereira, José Eduardo; Igrejas, Gilberto; Poeta, Patrícia

2017-12-23

The main aim of this study was to characterize the diversity of extended-spectrum beta-lactamases (ESBLs) in Escherichia coli isolates from European free tailed-bats (Tadarida teniotis) in Portugal. ESBL-producing E. coli isolates were recovered from 14 of 146 faecal samples (9.6%) and a total of 19 isolates were completely characterized. The more prevalent beta-lactamase genes detected were bla CTX-M-1 (57.9%) and bla CTX-M-3 (36.8%), followed by bla SHV (31.6%), bla TEM (21.1%), bla OXA (10.5%) and bla CTX-M-9 (10.5%). Among other associated resistance genes studied, tet(A) and tet(B) were predominant and fimA was the main virulence factor detected. Phylogroups D (47.4%) and A (31.6%) were the more prevalent, followed by group B2 (21.1%). Bats are reservoirs of antimicrobial-resistant bacteria and resistance determinants and is important in further studies to identify the main sources of pollution in the environment, such as water or insects that may contain these multiresistant organisms. Copyright © 2017 Elsevier B.V. All rights reserved.

78 FR 37132 - Approval and Promulgation of Implementation Plans; Revised Format for Materials Being...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-20

... the ``good cause'' exemption in section 553(b)(3)(B) of the Administrative Procedure Act (APA) which... recodification and miscellaneous revisions to the Florida SIP. EPA also finds that there is good cause under APA.... Section 553(d)(3) of the APA allows an effective date less than 30 days after publication ``as otherwise...

75 FR 75625 - Approval and Promulgation of Implementation Plans; North Carolina: Greensboro-Winston-Salem-High...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-06

...'' exemption in section 553(b)(3)(B) of the Administrative Procedure Act (APA) which, upon finding ``good cause... addition of paragraph (e) to 40 CFR 52.1781. EPA also finds that there is good cause under APA section 553...(d)(3) of the APA allows an effective date less than 30 days after publication ``as otherwise...

75 FR 72968 - Implementation of Section 203 of the Satellite Television Extension and Localism Act of 2010...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-29

... Commission's copy contractor, 445 12th Street, SW., Room CY-B402, Washington, DC 20554. Alternative formats... requirement in amended Section 340(b)(2) requires that, in order to carry an SV station in high definition (HD...) Service Limitations.--A satellite carrier may retransmit to a subscriber in high definition format the...

40 CFR 52.29 - Visibility long-term strategies.

Code of Federal Regulations, 2010 CFR

2010-07-01

... listed where applicable in Subparts B through DDD of this part. The provisions of this section have been incorporated into the applicable implementation plan for various States, as provided in Subparts B through DDD...

40 CFR 52.29 - Visibility long-term strategies.

Code of Federal Regulations, 2011 CFR

2011-07-01

... listed where applicable in Subparts B through DDD of this part. The provisions of this section have been incorporated into the applicable implementation plan for various States, as provided in Subparts B through DDD...

77 FR 64695 - Airworthiness Directives; Hawker Beechcraft Corporation Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-23

...; phone: (316) 946-4128; fax: (316) 946-4107; email: [email protected] . SUPPLEMENTARY INFORMATION...; phone: (316) 946-4128; fax: (316) 946-4107; email: [email protected] . (m) Material Incorporated...

77 FR 58312 - Revisions to the California State Implementation Plan, San Joaquin Valley Unified Air Pollution...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-20

... the California State Implementation Plan, San Joaquin Valley Unified Air Pollution Control District... revisions to the California State Implementation Plan, San Joaquin Valley Unified Air Pollution Control... section 307(b)(2)). List of Subjects in 40 CFR Part 52 Environmental protection, Air pollution control...

Silica-Immobilized Enzyme Reactors; Application to Cholinesterase-Inhibition Studies

DTIC Science & Technology

2006-03-01

a i a i e v b c a m p l 1 d Journal of Chromatography B, 843 (2006) 310–316 Silica-immobilized enzyme reactors; application to...however, have specific omat d t t i w i h c u C p R n t o t fl p f o l p d v t o s fl t t c t a b f c i h a t s m i b 2 2 ≈ c s 0 c A R I H l 2 b p a y ε c...b r T p d ( m 2 w

32 CFR 806b.2 - Basic guidelines.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 32 National Defense 6 2010-07-01 2010-07-01 false Basic guidelines. 806b.2 Section 806b.2 National Defense Department of Defense (Continued) DEPARTMENT OF THE AIR FORCE ADMINISTRATION PRIVACY ACT PROGRAM Overview of the Privacy Act Program § 806b.2 Basic guidelines. This part implements the Privacy Act of 1974...

77 FR 47568 - Airworthiness Directives; Hawker Beechcraft Corporation Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-09

..., Kansas 67209; phone: (316) 946-4128; fax: (316) 946-4107; email: [email protected] . SUPPLEMENTARY..., Kansas 67209; phone: (316) 946- 4128; fax: (316) 946-4107; email: [email protected] . (2) For...

Phosphorylation-Induced Conformational Changes of Photoactivated Rhodopsin Probed by Fluorescent Labeling at Cys140 and Cys316.

PubMed

Rodríguez, Sheerly; Silva, May-Li; Benaím, Gustavo; Bubis, José

2018-05-03

In order to monitor conformational changes following photoactivation and phosphorylation of bovine rhodopsin, the two reactive sulfhydryl groups at Cys 140 and Cys 316 were specifically labeled with the monobromobimane (mBBr) fluorophore. Although alterations in conformation after light exposure of rhodopsin were not detected by fluorescence excitation scans (300-450 nm) of the mBBr-labeled protein, the fluorescence signal was reduced ∼ 90% in samples containing photoactivated phosphorhodopsin. Predominant labeling at either Cys 140 or Cys 316 in light-activated and phosphorylated rhodopsin merely generated a decrease of ∼ 38% and 28%, respectively, in the fluorescence excitation intensity. Thus, neither mBBr-modified Cys 140 nor mBBr-modified Cys 316 were involved single-handedly in the remarkable fall seen on the signal following phosphorylation of the protein; rather, the incorporation of phosphate groups on the mBBr-labeled light-activated rhodopsin appeared to affect its fluorescence signal in a cooperative or synergistic manner. These findings demonstrated that the phosphorylation of specific hydroxyl groups at the carboxyl terminal tail of rhodopsin causes definite conformational changes in the three-dimensional fold of the protein. Apparently, amino acid residues that are buried in the interior of the inactive protein become accessible following bleaching and phosphorylation of rhodopsin, quenching in turn the fluorescence excitation signal of mBBr-modified rhodopsin. Copyright © 2018 Elsevier B.V. and Société Française de Biochimie et Biologie Moléculaire (SFBBM). All rights reserved.

Exceptionally high cavitation erosion and corrosion resistance of a high entropy alloy.

PubMed

Nair, R B; Arora, H S; Mukherjee, Sundeep; Singh, S; Singh, H; Grewal, H S

2018-03-01

Cavitation erosion and corrosion of structural materials are serious concerns for marine and offshore industries. Durability and performance of marine components are severely impaired due to degradation from erosion and corrosion. Utilization of advanced structural materials can play a vital role in limiting such degradation. High entropy alloys (HEAs) are a relatively new class of advanced structural materials with exceptional properties. In the present work, we report on the cavitation erosion behavior of Al 0.1 CoCrFeNi HEA in two different media: distilled water with and without 3.5wt% NaCl. For comparison, conventionally used stainless steel SS316L was also evaluated in identical test conditions. Despite lower hardness and yield strength, the HEA showed significantly longer incubation period and lower erosion-corrosion rate (nearly 1/4th) compared to SS316L steel. Enhanced erosion resistance of HEA was attributed to its high work-hardening behavior and stable passivation film on the surface. The Al 0.1 CoCrFeNi HEA showed lower corrosion current density, high pitting resistance and protection potential compared to SS316L steel. Further, HEA showed no evidence of intergranular corrosion likely due to the absence of secondary precipitates. Although, the degradation mechanisms (formation of pits and fatigue cracks) were similar for both the materials, the damage severity was found to be much higher for SS316L steel compared to HEA. Copyright © 2017 Elsevier B.V. All rights reserved.

Rate of antioxidant degradation and color variations in dehydrated apples as related to water activity.

PubMed

Lavelli, Vera; Vantaggi, Claudia

2009-06-10

Dehydrated apples were studied to evaluate the effects of water activity on the stability of their antioxidants and color. Apples were freeze-dried, ground, then equilibrated, and stored at eight water activity levels, ranging from 0.058 to 0.747, at 40 degrees C. Their contents of hydroxycinnamic acids, dihydrochalcones, catechin, epicatechin, polymeric flavan-3-ols, and hydroxymethylfurfural, their antioxidant activity values, and their Hunter colorimetric parameters were analyzed at different storage times. Antioxidant degradation followed pseudo-first-order kinetics and was accelerated by increasing the water activity. The order of antioxidant stability in the products at water activity levels below 0.316 was catechin, epicatechin, and ascorbic acid < total procyanidins < dihydrochalcones and p-coumaric acid < chlorogenic acid; however, in the products at water activity levels above 0.316, the degradation of all antioxidants was very fast. The hydroxymethylfurfural formation rate increased exponentially during storage, especially at high water activity levels. The antioxidant activity of the dehydrated apples decreased during storage, consistent with antioxidant loss. The variations of the colorimetric parameters, namely, lightness (L*), redness (a*), and yellowness (b*), followed pseudo-zero-order kinetics and were accelerated by increasing water activity. All analytical indices indicated that the dehydrated apples were stable at water activity levels below 0.316, with the degradation rate accelerating upon exposure to higher relative humidities. Above 0.316, a small increase in water activity of the product would sharply increase the degradation rate constants for both antioxidant and color variations.

Effects of Health Status and Health Behaviors on Depression Among Married Female Immigrants in South Korea.

PubMed

Kim, Jung A; Yang, Sook Ja; Chee, Yeon Kyung; Kwon, Kyoung Ja; An, Jisook

2015-06-01

This study examined the effects of health status and health behaviors on depression in married female immigrants in South Korea. Sampling 316 immigrant women from the Philippines, Vietnam, China, and other Asian countries, a cross-sectional research design was used with self-report questionnaires that assessed sociodemographic characteristics, health status, health behaviors, and depression. There were significant differences in stillbirth experience, induced abortion, morbidity, perceived health status, meal skipping, and physical activity between depressed and nondepressed immigrant women. After adjusting for sociodemographic variables, stillbirth experience, poorer perceived health status, more meal skipping, and less physical activity were associated with greater depressive symptoms. Both health status and health behaviors had significant impacts on depression, suggesting that development of nursing interventions and educational programs should be targeted towards improving maternal health, healthy lifestyle, and subjective health perception to promote married female immigrants' psychological well-being. Copyright © 2015. Published by Elsevier B.V.

Molecular Cloning and Characterization of cgs, the Brucella abortus Cyclic β(1-2) Glucan Synthetase Gene: Genetic Complementation of Rhizobium meliloti ndvB and Agrobacterium tumefaciens chvB Mutants

PubMed Central

Iñón de Iannino, Nora; Briones, Gabriel; Tolmasky, Marcelo; Ugalde, Rodolfo A.

1998-01-01

The animal pathogen Brucella abortus contains a gene, cgs, that complemented a Rhizobium meliloti nodule development (ndvB) mutant and an Agrobacterium tumefaciens chromosomal virulence (chvB) mutant. The complemented strains recovered the synthesis of cyclic β(1-2) glucan, motility, virulence in A. tumefaciens, and nitrogen fixation in R. meliloti; all traits were strictly associated with the presence of an active cyclic β(1-2) glucan synthetase protein in the membranes. Nucleotide sequencing revealed the presence in B. abortus of an 8.49-kb open reading frame coding for a predicted membrane protein of 2,831 amino acids (316.2 kDa) and with 51% identity to R. meliloti NdvB. Four regions of the B. abortus protein spanning amino acids 520 to 800, 1025 to 1124, 1284 to 1526, and 2400 to 2660 displayed similarities of higher than 80% with R. meliloti NdvB. Tn3-HoHo1 mutagenesis showed that the C-terminal 825 amino acids of the Brucella protein, although highly conserved in Rhizobium, are not necessary for cyclic β(1-2) glucan synthesis. Confirmation of the identity of this protein as B. abortus cyclic β(1-2) glucan synthetase was done by the construction of a B. abortus Tn3-HoHo1 insertion mutant that does not form cyclic β(1-2) glucan and lacks the 316.2-kDa membrane protein. The recovery of this mutant from the spleens of inoculated mice was decreased by 3 orders of magnitude compared with that of the parental strain; this result suggests that cyclic β(1-2) glucan may be a virulence factor in Brucella infection. PMID:9721274

40 CFR 90.315 - Analyzer initial calibration.

Code of Federal Regulations, 2012 CFR

2012-07-01

... specifications in § 90.316(b). (c) Zero setting and calibration. Using purified synthetic air (or nitrogen), set the CO, CO2, NOX. and HC analyzers at zero. Connect the appropriate calibrating gases to the analyzers...) Rechecking of zero setting. Recheck the zero setting and, if necessary, repeat the procedure described in...

40 CFR 90.315 - Analyzer initial calibration.

Code of Federal Regulations, 2014 CFR

2014-07-01

... specifications in § 90.316(b). (c) Zero setting and calibration. Using purified synthetic air (or nitrogen), set the CO, CO2, NOX. and HC analyzers at zero. Connect the appropriate calibrating gases to the analyzers...) Rechecking of zero setting. Recheck the zero setting and, if necessary, repeat the procedure described in...

40 CFR 90.315 - Analyzer initial calibration.

Code of Federal Regulations, 2013 CFR

2013-07-01

... specifications in § 90.316(b). (c) Zero setting and calibration. Using purified synthetic air (or nitrogen), set the CO, CO2, NOX. and HC analyzers at zero. Connect the appropriate calibrating gases to the analyzers...) Rechecking of zero setting. Recheck the zero setting and, if necessary, repeat the procedure described in...

40 CFR 90.315 - Analyzer initial calibration.

Code of Federal Regulations, 2011 CFR

2011-07-01

... specifications in § 90.316(b). (c) Zero setting and calibration. Using purified synthetic air (or nitrogen), set the CO, CO2, NOX. and HC analyzers at zero. Connect the appropriate calibrating gases to the analyzers...) Rechecking of zero setting. Recheck the zero setting and, if necessary, repeat the procedure described in...

40 CFR 90.315 - Analyzer initial calibration.

Code of Federal Regulations, 2010 CFR

2010-07-01

... specifications in § 90.316(b). (c) Zero setting and calibration. Using purified synthetic air (or nitrogen), set the CO, CO2, NOX. and HC analyzers at zero. Connect the appropriate calibrating gases to the analyzers...) Rechecking of zero setting. Recheck the zero setting and, if necessary, repeat the procedure described in...

Transfer reaction code with nonlocal interactions

DOE PAGES

Titus, L. J.; Ross, A.; Nunes, F. M.

2016-07-14

We present a suite of codes (NLAT for nonlocal adiabatic transfer) to calculate the transfer cross section for single-nucleon transfer reactions, (d,N)(d,N) or (N,d)(N,d), including nonlocal nucleon–target interactions, within the adiabatic distorted wave approximation. For this purpose, we implement an iterative method for solving the second order nonlocal differential equation, for both scattering and bound states. The final observables that can be obtained with NLAT are differential angular distributions for the cross sections of A(d,N)BA(d,N)B or B(N,d)AB(N,d)A. Details on the implementation of the TT-matrix to obtain the final cross sections within the adiabatic distorted wave approximation method are also provided.more » This code is suitable to be applied for deuteron induced reactions in the range of View the MathML sourceEd=10–70MeV, and provides cross sections with 4% accuracy.« less

77 FR 64693 - Airworthiness Directives; Hawker Beechcraft Corporation Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-23

..., 1801 Airport Road, Room 100, Wichita, Kansas 67209; phone: (316) 946-4128; fax: (316) 946-4107; email..., Kansas 67209; phone: (316) 946-4128; fax: (316) 946-4107; email: [email protected] . (k) Material...

40 CFR 52.2773 - EPA-approved Virgin Islands regulations.

Code of Federal Regulations, 2012 CFR

2012-07-01

... at 40 CFR 52.21(b)(20). Section 204-21, “Regulations to Control Open Burning” 1/15/87 .....do Section.... 52.2773 Section 52.2773 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS (CONTINUED) Virgin Islands § 52.2773...

40 CFR 52.2773 - EPA-approved Virgin Islands regulations.

Code of Federal Regulations, 2011 CFR

2011-07-01

... at 40 CFR 52.21(b)(20). Section 204-21, “Regulations to Control Open Burning” 1/15/87 .....do Section.... 52.2773 Section 52.2773 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS (CONTINUED) Virgin Islands § 52.2773...

40 CFR 52.2773 - EPA-approved Virgin Islands regulations.

Code of Federal Regulations, 2014 CFR

2014-07-01

... at 40 CFR 52.21(b)(20). Section 204-21, “Regulations to Control Open Burning” 1/15/87 .....do Section.... 52.2773 Section 52.2773 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS (CONTINUED) Virgin Islands § 52.2773...

40 CFR 52.2773 - EPA-approved Virgin Islands regulations.

Code of Federal Regulations, 2013 CFR

2013-07-01

... at 40 CFR 52.21(b)(20). Section 204-21, “Regulations to Control Open Burning” 1/15/87 .....do Section.... 52.2773 Section 52.2773 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS (CONTINUED) Virgin Islands § 52.2773...

12 CFR 741.4 - Insurance premium and one percent deposit.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 12 Banks and Banking 6 2011-01-01 2011-01-01 false Insurance premium and one percent deposit. 741... Insurance premium and one percent deposit. (a) Scope. This section implements the requirements of Section... payment of an insurance premium. (b) Definitions. For purposes of this section: Available assets ratio...

77 FR 52338 - Center for Scientific Review; Notice of Closed Meetings

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-29

...; Dissemination and Implementation Research in Health Study Section. Date: September 24, 2012. Time: 8:00 a.m. to..., Genomes, and Genetics Integrated Review Group; Molecular Genetics B Study Section. Date: September 27-28...: Healthcare Delivery and Methodologies Integrated Review Group; Community-Level Health Promotion Study Section...

Rapid production of hollow SS316 profiles by extrusion based additive manufacturing

NASA Astrophysics Data System (ADS)

Rane, Kedarnath; Cataldo, Salvatore; Parenti, Paolo; Sbaglia, Luca; Mussi, Valerio; Annoni, Massimiliano; Giberti, Hermes; Strano, Matteo

2018-05-01

Complex shaped stainless steel tubes are often required for special purpose biomedical equipment. Nevertheless, traditional manufacturing technologies, such as extrusion, lack the ability to compete in a market of customized complex components because of associated expenses towards tooling and extrusion presses. To rapid manufacture few of such components with low cost and high precision, a new Extrusion based Additive Manufacturing (EAM) process, is proposed in this paper, and as an example, short stainless steel 316L complex shaped and sectioned tubes were prepared by EAM. Several sample parts were produced using this process; the dimensional stability, surface roughness and chemical composition of sintered samples were investigated to prove process competence. The results indicate that feedstock with a 316L particle content of 92.5 wt. % can be prepared with a sigma blade mixing, whose rheological behavior is fit for EAM. The green samples have sufficient strength to handle them for subsequent treatments. The sintered samples considerably shrunk to designed dimensions and have a homogeneous microstructure to impart mechanical strength. Whereas, maintaining comparable dimensional accuracy and chemical composition which are required for biomedical equipment still need iterations, a kinematic correction and modification in debinding cycle was proposed.

75 FR 75626 - Approval and Promulgation of Implementation Plans; North Carolina: Hickory-Morganton-Lenoir...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-06

...'' exemption in section 553(b)(3)(B) of the Administrative Procedure Act (APA) which, upon finding ``good cause... approve the addition of paragraph (f) to 40 CFR 52.1781. EPA also finds that there is good cause under APA.... Section 553(d)(3) of the APA allows an effective date less than 30 days after publication ``as otherwise...

49 CFR 230.38 - Telltale holes.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 4 2013-10-01 2013-10-01 false Telltale holes. 230.38 Section 230.38... Staybolts § 230.38 Telltale holes. (a) Staybolts less than 8 inches long. All staybolts shorter than 8 inches, except flexible bolts, shall have telltale holes 3/16 inch to 7/32 inch diameter and at least 11...

49 CFR 230.38 - Telltale holes.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 4 2011-10-01 2011-10-01 false Telltale holes. 230.38 Section 230.38... Staybolts § 230.38 Telltale holes. (a) Staybolts less than 8 inches long. All staybolts shorter than 8 inches, except flexible bolts, shall have telltale holes 3/16 inch to 7/32 inch diameter and at least 11...

49 CFR 230.38 - Telltale holes.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 4 2012-10-01 2012-10-01 false Telltale holes. 230.38 Section 230.38... Staybolts § 230.38 Telltale holes. (a) Staybolts less than 8 inches long. All staybolts shorter than 8 inches, except flexible bolts, shall have telltale holes 3/16 inch to 7/32 inch diameter and at least 11...

49 CFR 230.38 - Telltale holes.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 4 2014-10-01 2014-10-01 false Telltale holes. 230.38 Section 230.38... Staybolts § 230.38 Telltale holes. (a) Staybolts less than 8 inches long. All staybolts shorter than 8 inches, except flexible bolts, shall have telltale holes 3/16 inch to 7/32 inch diameter and at least 11...

49 CFR 230.38 - Telltale holes.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Telltale holes. 230.38 Section 230.38... Staybolts § 230.38 Telltale holes. (a) Staybolts less than 8 inches long. All staybolts shorter than 8 inches, except flexible bolts, shall have telltale holes 3/16 inch to 7/32 inch diameter and at least 11...

40 CFR 125.72 - Early screening of applications for section 316(a) variances.

Code of Federal Regulations, 2010 CFR

2010-07-01

... necessary; (3) A general description of the type of data, studies, experiments and other information which... filed, the discharger shall submit for the Director's approval a detailed plan of study which the... nature and extent of the following type of information to be included in the plan of study: Biological...

40 CFR 125.72 - Early screening of applications for section 316(a) variances.

Code of Federal Regulations, 2011 CFR

2011-07-01

... necessary; (3) A general description of the type of data, studies, experiments and other information which... filed, the discharger shall submit for the Director's approval a detailed plan of study which the... nature and extent of the following type of information to be included in the plan of study: Biological...

7 CFR 4280.316 - Application scoring.

Code of Federal Regulations, 2011 CFR

2011-01-01

... up to 45 points available in paragraph (a) of this section, is 55, for a total of 100. (1) History of provision of microloans. The applicant must provide data regarding its history of making microloans for the... # of Microloans Made to women # of Microloans Made to the Disabled (i) Number and amount of microloans...

7 CFR 4280.316 - Application scoring.

Code of Federal Regulations, 2014 CFR

2014-01-01

... up to 45 points available in paragraph (a) of this section, is 55, for a total of 100. (1) History of provision of microloans. The applicant must provide data regarding its history of making microloans for the... # of Microloans Made to women # of Microloans Made to the Disabled (i) Number and amount of microloans...

7 CFR 4280.316 - Application scoring.

Code of Federal Regulations, 2012 CFR

2012-01-01

... up to 45 points available in paragraph (a) of this section, is 55, for a total of 100. (1) History of provision of microloans. The applicant must provide data regarding its history of making microloans for the... # of Microloans Made to women # of Microloans Made to the Disabled (i) Number and amount of microloans...

7 CFR 4280.316 - Application scoring.

Code of Federal Regulations, 2013 CFR

2013-01-01

... up to 45 points available in paragraph (a) of this section, is 55, for a total of 100. (1) History of provision of microloans. The applicant must provide data regarding its history of making microloans for the... # of Microloans Made to women # of Microloans Made to the Disabled (i) Number and amount of microloans...

40 CFR 49.10410 - Federally-promulgated regulations and Federal implementation plans.

Code of Federal Regulations, 2010 CFR

2010-07-01

... (b), (i), (j), (k), (l) and (n) of this section. [70 FR 18120, Apr. 8, 2005, as amended at 70 FR....132Rule for general open burning permits. (k) Section 49.133Rule for agricultural burning permits. (l... detrimental to public health or welfare. (n) Section 49.137Rule for air pollution episodes. (o) Section 49...

40 CFR 52.2230 - Attainment dates for national standards.

Code of Federal Regulations, 2011 CFR

2011-07-01

.... 52.2230 Section 52.2230 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS (CONTINUED) Tennessee § 52.2230...: Bristol and Kingsport nonattainment areas 1 d d c c b b d b. Campbell County nonattainment areas 1 d d c c...

14 CFR 1203b.108 - Management oversight.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false Management oversight. 1203b.108 Section... AUTHORITY AND USE OF FORCE BY NASA SECURITY FORCE PERSONNEL § 1203b.108 Management oversight. (a) The Administrator shall establish a committee to exercise management oversight over the implementation of arrest...

75 FR 67613 - Airworthiness Directives; McCauley Propeller Systems Five-Blade Propeller Assemblies

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-03

... 100, Wichita, KS 67209, telephone: (316) 946- 4148; fax: (316) 946-4107; e-mail: [email protected] 67209, telephone: (316) 946-4148; fax: (316) 946-4107, for more information about this AD. Material...

Hydrothermal calcium modification of 316L stainless steel and its apatite forming ability in simulated body fluid.

PubMed

Valanezahad, Alireza; Ishikawa, Kunio; Tsuru, Kanji; Maruta, Michito; Matsuya, Shigeki

2011-01-01

To understand the feasibility of calcium (Ca) modification of type 316L stainless steel (316L SS) surface using hydrothermal treatment, 316L SS plates were treated hydrothermally in calcium chloride (CaCl(2)) solution. X-ray photoelectron spectroscopic analysis revealed that the surface of 316L SS plate was modified with Ca after hydrothermal treatment at 200°C. And the immobilized Ca increased with CaCl(2) concentration. However no Ca-modification was occurred for 316L SS plates treated at 100°C. When Ca-modified 316L SS plate was immersed in simulated body fluid (SBF) with ion concentrations nearly equal to those of human blood plasma, low crystalline apatite was precipitated on its surface whereas no precipitate was observed on non Ca-modified 316L SS. The results obtained in the present study indicated that hydrothermal treatment at 200°C in CaCl(2) solution is useful for Ca-modification of 316L SS, and Ca-modification plays important role for apatite precipitation in SBF.

32 CFR 806b.51 - Privacy and the Web.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 32 National Defense 6 2010-07-01 2010-07-01 false Privacy and the Web. 806b.51 Section 806b.51... PROGRAM Disclosing Records to Third Parties § 806b.51 Privacy and the Web. Do not post personal information on publicly accessible DoD web sites unless clearly authorized by law and implementing regulation...

32 CFR 806b.51 - Privacy and the Web.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 32 National Defense 6 2011-07-01 2011-07-01 false Privacy and the Web. 806b.51 Section 806b.51... PROGRAM Disclosing Records to Third Parties § 806b.51 Privacy and the Web. Do not post personal information on publicly accessible DoD web sites unless clearly authorized by law and implementing regulation...

14 CFR § 1203b.100 - Purpose.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 14 Aeronautics and Space 5 2014-01-01 2014-01-01 false Purpose. § 1203b.100 Section § 1203b.100 Aeronautics and Space NATIONAL AERONAUTICS AND SPACE ADMINISTRATION SECURITY PROGRAMS; ARREST AUTHORITY AND USE OF FORCE BY NASA SECURITY FORCE PERSONNEL § 1203b.100 Purpose. This regulation implements 51 U.S.C...

A novel ureteral stent material with antibacterial and reducing encrustation properties.

PubMed

Zhao, Jing; Cao, Zhiqiang; Ren, Ling; Chen, Shanshan; Zhang, Bingchun; Liu, Rui; Yang, Ke

2016-11-01

Ureteral stents have been used to relieve ureterostenosis. Complications such as infection and encrustation occur in the long time of stent implantation, which is a clinical problem needs to be resolved. Indwelling ureteral stents have shown to develop microbial biofilm that may lead to recurrent infection and encrustation. This study was aiming to reduce those complications by using a novel material, Cu-bearing antibacterial stainless steel. The antibacterial performance, encrustation property, and biocompatibility were examined by SEM, image analysis, MTT and would healing. The in vitro immersion test showed that 316LCu-bearing stainless steel (316LCu-SS) not only inhibited proliferation of bacteria and formation of biofilm, but also had less encrustation deposition. Its antibacterial effectiveness against Escherichia coli reached to 92.7% in the artificial urine for 24h and 90.3% in the human urine for 6h. The encrustation surface coverage percentage was 30.2% by 12weeks, which was nearly one half of NiTi alloy. The in vitro tests showed that 316LCu-SS had no toxicity, and promoted the migration of urethral epithelial cells. Copyright © 2016 Elsevier B.V. All rights reserved.

The Influence of Porosity on Corrosion Attack of Austenitic Stainless Steel

NASA Astrophysics Data System (ADS)

Abdullah, Z.; Ismail, A.; Ahmad, S.

2017-10-01

Porous metals also known as metal foams is a metallic body having spaces orpores through which liquid or air may pass. Porous metals get an attention from researchers nowadays due to their unique combination of properties includes excellent mechanical and electrical, high energy absorption, good thermal and sound insulation and water and gas permeability. Porous metals have been applied in numerous applications such as in automotive, aerospace and also in biomedical applications. This research reveals the influence of corrosion attack in porous austenitic stainless steel 316L. The cyclic polarization potential analysis was performed on the porous austenitic stainless steel 316L in 3.5% NaCl solution. The morphology and the element presence on the samples before and after corrosion attack was examined using scanning electron microscopy (SEM) and energy dispersive x-ray (EDX) respectively to determine the corrosion mechanism structure. The cyclic polarization potential analysis showed the result of (E corr ) for porous austenitic stainless steel type 316L in the range of -0.40v to -0.60v and breakdown potential (E b ) is -0.3v to -0.4v in NaCl solution.

76 FR 28646 - Implementation of the New Source Review (NSR) Program for Particulate Matter Less Than 2.5...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-18

... Program B. Fine PM and the NAAQS for PM 2.5 C. How is the PSD program for PM 2.5 implemented? IV... ? B. Why did EPA propose to repeal the grandfather provision for PM 2.5 ? C. Summary of Comments and... maintain the NAAQS and to meet the other requirements of section 110(a) of the Act. Part C of title I of...

Foothills Parkway Section 8B Final Environmental Report, Volume 4, Appendices E-I

DOE Office of Scientific and Technical Information (OSTI.GOV)

Blasing, T.J.; Cada, G.F.; Carer, M.

1999-07-01

In 1994, Oak Ridge National Laboratory (ORNL) was tasked by the National Park Service (NPS) to prepare an Environmental Report (ER) for Section 8B of the Foothills Parkway in the Great Smoky Mountains National Park (GSMNP). Section 8B represents 27.7 km (14.2 miles) of a total of 115 km (72 miles) of the planned Foothills Parkway and would connect the Cosby community on the east to the incorporated town of Pittman Center to the west. The major deliverables for the project are listed. From August 1995 through October 1996, NPS, GSMNP, and ORNL staff interacted with Federal Highway Administration staffmore » to develop a conceptual design plan for Section 8B with the intent of protecting critical, resources identified during the ER process to the extent possible. In addition, ORNL arranged for bioengineering experts to discuss techniques that might be employed on Section 8B with NPS, GSMNP, and ORNL staff during September 1996. For the purposes of this ER, there are two basic alternatives under consideration: (1) a build alternative and (2) a no-build alternative. Within the build alternative are a number of options including constructing Section 8B with no interchanges, constructing Section 8B with an interchange at SR 416 or U.S. 321, constructing Section 8B with a spur road on Webb Mountain, and considering operation of Section 8B both before and after the operation of Section 8C. The no-build alternative is considered the no-action alternative and is not to construct Section 8B. This volume of the ER consists of Appendices E through I (all ecological survey reports), which are summarized individually in the sections that follow. The following conclusions result from the completion of these surveys and the ER impact analysis: (1) Forest clearing should be limited as much as possible; (2) Disturbed areas should be replanted with native trees; (3) Drainages should be bridged rather than leveled with cut and fill; (4) For areas of steep slopes and potential erosion, bioengineering techniques should be implemented; (5) The Webb Mt. spur road is not recommended. If the spur road is built no grass shoulders should be used (to minimize forest fragmentation impacts); and (6) Transplanting of protected plants should be done when possible. Construction in wetland areas should be avoided and erosion and sedimentation mitigation measures discussed under water resources and aquatic ecology should be implemented.« less

78 FR 14640 - Airworthiness Directives; Cessna Aircraft Company Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-07

...), 1801 Airport Road, Room 100, Mid-Continent Airport, Wichita, Kansas 67209; phone: 316-946-4165; fax: 316-946-4107; email: [email protected] . SUPPLEMENTARY INFORMATION: Discussion We issued a...: 316-946-4165; fax: 316-946-4107; email: [email protected] . (m) Material Incorporated by...

27 CFR 28.316 - Notice to exporter.

Code of Federal Regulations, 2010 CFR

2010-04-01

... unlawfully diverted, or had been lost by theft, he will advise the exporter by letter: (a) Of the identity of the containers; (b) Of the amount of the loss; (c) Of the circumstances indicating diversion or theft... described in § 28.315, whether by theft or otherwise, the appropriate TTB officer may require the exporter...

27 CFR 28.316 - Notice to exporter.

Code of Federal Regulations, 2011 CFR

2011-04-01

... unlawfully diverted, or had been lost by theft, he will advise the exporter by letter: (a) Of the identity of the containers; (b) Of the amount of the loss; (c) Of the circumstances indicating diversion or theft... described in § 28.315, whether by theft or otherwise, the appropriate TTB officer may require the exporter...

40 CFR 91.315 - Analyzer initial calibration.

Code of Federal Regulations, 2013 CFR

2013-07-01

... in § 91.316(b). (c) Zero setting and calibration. Using purified synthetic air (or nitrogen), set the CO, CO2, NOX and HC analyzers at zero. Connect the appropriate calibrating gases to the analyzers and record the values. The same gas flow rates shall be used as when sampling exhaust. (d) Rechecking of zero...

40 CFR 91.315 - Analyzer initial calibration.

Code of Federal Regulations, 2014 CFR

2014-07-01

... in § 91.316(b). (c) Zero setting and calibration. Using purified synthetic air (or nitrogen), set the CO, CO2, NOX and HC analyzers at zero. Connect the appropriate calibrating gases to the analyzers and record the values. The same gas flow rates shall be used as when sampling exhaust. (d) Rechecking of zero...

40 CFR 91.315 - Analyzer initial calibration.

Code of Federal Regulations, 2012 CFR

2012-07-01

... in § 91.316(b). (c) Zero setting and calibration. Using purified synthetic air (or nitrogen), set the CO, CO2, NOX and HC analyzers at zero. Connect the appropriate calibrating gases to the analyzers and record the values. The same gas flow rates shall be used as when sampling exhaust. (d) Rechecking of zero...

40 CFR 91.315 - Analyzer initial calibration.

Code of Federal Regulations, 2010 CFR

2010-07-01

... in § 91.316(b). (c) Zero setting and calibration. Using purified synthetic air (or nitrogen), set the CO, CO2, NOX and HC analyzers at zero. Connect the appropriate calibrating gases to the analyzers and record the values. The same gas flow rates shall be used as when sampling exhaust. (d) Rechecking of zero...

40 CFR 91.315 - Analyzer initial calibration.

Code of Federal Regulations, 2011 CFR

2011-07-01

... in § 91.316(b). (c) Zero setting and calibration. Using purified synthetic air (or nitrogen), set the CO, CO2, NOX and HC analyzers at zero. Connect the appropriate calibrating gases to the analyzers and record the values. The same gas flow rates shall be used as when sampling exhaust. (d) Rechecking of zero...

10 CFR 431.296 - Energy conservation standards and their effective dates.

Code of Federal Regulations, 2013 CFR

2013-01-01

... CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Refrigerated Bottled or Canned Beverage Vending Machines... refrigerated bottled or canned beverage vending machine manufactured on or after August 31, 2012 shall have a... (kilowatt hours per day) Class A MDEC = 0.055 × V + 2.56. Class B MDEC = 0.073 × V + 3.16. Combination...

40 CFR 98.317 - Records that must be retained.

Code of Federal Regulations, 2010 CFR

2010-07-01

...) Sampling analysis results for the carbon content of carbon containing waste (percent by weight expressed as... paraghraph: (1) Records of all calcined petroleum coke purchases (tons). (2) Records of all analyses and calculations conducted for all reported data as listed in § 98.316(b). (3) Sampling analysis results for carbon...

Costs associated with implementation of computer-assisted clinical decision support system for antenatal and delivery care: case study of Kassena-Nankana district of northern Ghana.

PubMed

Dalaba, Maxwell Ayindenaba; Akweongo, Patricia; Williams, John; Saronga, Happiness Pius; Tonchev, Pencho; Sauerborn, Rainer; Mensah, Nathan; Blank, Antje; Kaltschmidt, Jens; Loukanova, Svetla

2014-01-01

This study analyzed cost of implementing computer-assisted Clinical Decision Support System (CDSS) in selected health care centres in Ghana. A descriptive cross sectional study was conducted in the Kassena-Nankana district (KND). CDSS was deployed in selected health centres in KND as an intervention to manage patients attending antenatal clinics and the labour ward. The CDSS users were mainly nurses who were trained. Activities and associated costs involved in the implementation of CDSS (pre-intervention and intervention) were collected for the period between 2009-2013 from the provider perspective. The ingredients approach was used for the cost analysis. Costs were grouped into personnel, trainings, overheads (recurrent costs) and equipment costs (capital cost). We calculated cost without annualizing capital cost to represent financial cost and cost with annualizing capital costs to represent economic cost. Twenty-two trained CDSS users (at least 2 users per health centre) participated in the study. Between April 2012 and March 2013, users managed 5,595 antenatal clients and 872 labour clients using the CDSS. We observed a decrease in the proportion of complications during delivery (pre-intervention 10.74% versus post-intervention 9.64%) and a reduction in the number of maternal deaths (pre-intervention 4 deaths versus post-intervention 1 death). The overall financial cost of CDSS implementation was US$23,316, approximately US$1,060 per CDSS user trained. Of the total cost of implementation, 48% (US$11,272) was pre-intervention cost and intervention cost was 52% (US$12,044). Equipment costs accounted for the largest proportion of financial cost: 34% (US$7,917). When economic cost was considered, total cost of implementation was US$17,128-lower than the financial cost by 26.5%. The study provides useful information in the implementation of CDSS at health facilities to enhance health workers' adherence to practice guidelines and taking accurate decisions to improve maternal health care.

42 CFR 405.701 - Basis, purpose and definitions.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 42 Public Health 2 2011-10-01 2011-10-01 false Basis, purpose and definitions. 405.701 Section 405... Medicare Part A § 405.701 Basis, purpose and definitions. (a) This subpart implements section 1869 of the... following matters, and section 1869(b) provides for a hearing for an individual who is dissatisfied with the...

42 CFR 447.25 - Direct payments to certain beneficiaries for physicians' or dentists' services.

Code of Federal Regulations, 2012 CFR

2012-10-01

... physicians' or dentists' services. 447.25 Section 447.25 Public Health CENTERS FOR MEDICARE & MEDICAID... dentists' services. (a) Basis and purpose. This section implements section 1905(a) of the Act by...' or dentists' services. (b) State plan requirements. Except for groups specified in paragraph (c) of...

42 CFR 447.25 - Direct payments to certain recipients for physicians' or dentists' services.

Code of Federal Regulations, 2011 CFR

2011-10-01

... physicians' or dentists' services. 447.25 Section 447.25 Public Health CENTERS FOR MEDICARE & MEDICAID... dentists' services. (a) Basis and purpose. This section implements section 1905(a) of the Act by... dentists' services. (b) State plan requirements. Except for groups specified in paragraph (c) of this...

42 CFR 447.25 - Direct payments to certain beneficiaries for physicians' or dentists' services.

Code of Federal Regulations, 2013 CFR

2013-10-01

... physicians' or dentists' services. 447.25 Section 447.25 Public Health CENTERS FOR MEDICARE & MEDICAID... dentists' services. (a) Basis and purpose. This section implements section 1905(a) of the Act by...' or dentists' services. (b) State plan requirements. Except for groups specified in paragraph (c) of...

42 CFR 447.25 - Direct payments to certain beneficiaries for physicians' or dentists' services.

Code of Federal Regulations, 2014 CFR

2014-10-01

... physicians' or dentists' services. 447.25 Section 447.25 Public Health CENTERS FOR MEDICARE & MEDICAID... dentists' services. (a) Basis and purpose. This section implements section 1905(a) of the Act by...' or dentists' services. (b) State plan requirements. Except for groups specified in paragraph (c) of...

42 CFR 447.25 - Direct payments to certain recipients for physicians' or dentists' services.

Code of Federal Regulations, 2010 CFR

2010-10-01

... physicians' or dentists' services. 447.25 Section 447.25 Public Health CENTERS FOR MEDICARE & MEDICAID... dentists' services. (a) Basis and purpose. This section implements section 1905(a) of the Act by... dentists' services. (b) State plan requirements. Except for groups specified in paragraph (c) of this...

12 CFR 741.4 - Insurance premium and one percent deposit.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 12 Banks and Banking 6 2010-01-01 2010-01-01 false Insurance premium and one percent deposit. 741... Insurance premium and one percent deposit. (a) Scope. This section implements the requirements of Section... payment of an insurance premium. (b) Definitions. For purposes of this section: (1) Available assets ratio...

Soil Moisture Active Passive (SMAP) Project Algorithm Theoretical Basis Document SMAP L1B Radiometer Data Product: L1B_TB

NASA Technical Reports Server (NTRS)

Piepmeier, Jeffrey; Mohammed, Priscilla; De Amici, Giovanni; Kim, Edward; Peng, Jinzheng; Ruf, Christopher; Hanna, Maher; Yueh, Simon; Entekhabi, Dara

2016-01-01

The purpose of the Soil Moisture Active Passive (SMAP) radiometer calibration algorithm is to convert Level 0 (L0) radiometer digital counts data into calibrated estimates of brightness temperatures referenced to the Earth's surface within the main beam. The algorithm theory in most respects is similar to what has been developed and implemented for decades for other satellite radiometers; however, SMAP includes two key features heretofore absent from most satellite borne radiometers: radio frequency interference (RFI) detection and mitigation, and measurement of the third and fourth Stokes parameters using digital correlation. The purpose of this document is to describe the SMAP radiometer and forward model, explain the SMAP calibration algorithm, including approximations, errors, and biases, provide all necessary equations for implementing the calibration algorithm and detail the RFI detection and mitigation process. Section 2 provides a summary of algorithm objectives and driving requirements. Section 3 is a description of the instrument and Section 4 covers the forward models, upon which the algorithm is based. Section 5 gives the retrieval algorithm and theory. Section 6 describes the orbit simulator, which implements the forward model and is the key for deriving antenna pattern correction coefficients and testing the overall algorithm.

75 FR 22807 - Implementation of Section 5001 of the American Recovery and Reinvestment Act of 2009 (Pub. L. 111...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-30

... formulas in sections 1905(b) and 1101(a)(8)(B), and statistics from the Department of Commerce of average income per person in each State and for the Nation as a whole. The percentages must be within the upper... capita income of such State bears to the square of the per capita income of the continental United States...

77 FR 50611 - Approval and Promulgation of Implementation Plans; State of Oregon; Regional Haze State...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-22

... over a wide geographical area. See CAA section 169A and B and Federal Regulations in 40 CFR 51.308...) section 169A and B and the regional haze regulations in 40 CFR 51.308. In a previous action on July 5... Progress Goals (RPGs) for their Class I areas, and to develop a Long-Term Strategy (LTS) to achieve these...

Long-term stability of self-assembled monolayers on 316L stainless steel.

PubMed

Kaufmann, C R; Mani, G; Marton, D; Johnson, D M; Agrawal, C M

2010-04-01

316L stainless steel (316L SS) has been extensively used for making orthopedic, dental and cardiovascular implants. The use of phosphonic acid self-assembled monolayers (SAMs) on 316L SS has been previously explored for potential biomedical applications. In this study, we have investigated the long-term stability of methyl (-CH(3)) and carboxylic acid (-COOH)-terminated phosphonic acid SAMs on 316L under physiological conditions. The stability of SAMs on mechanically polished and electropolished 316L SS was also investigated as a part of this study. Well-ordered and uniform -CH(3)- and -COOH-terminated SAMs were coated on mechanically polished and electropolished 316L SS surfaces. The long-term stability of SAMs on 316L SS was investigated for up to 28 days in Tris-buffered saline (TBS) at 37 degrees C using x-ray photoelectron spectroscopy, atomic force microscopy and contact angle goniometry. A significant amount of phosphonic acid molecules was desorbed from the 316L SS surfaces within 1 to 7 days of TBS immersion followed by a slow desorption of molecules over the remaining days. The -COOH-terminated SAM was found to be more stable than the -CH(3)-terminated SAM on both mechanically and electropolished surfaces. No significant differences in the desorption behavior of SAMs were observed between mechanically and electropolished 316L SS surfaces.

17 CFR Appendix B to Part 162 - Interagency Guidelines on Identity Theft Detection, Prevention, and Mitigation

Code of Federal Regulations, 2014 CFR

2014-04-01

... detects a fraud or active duty alert; (c) Implementing any requirements for furnishers of information to... Identity Theft Detection, Prevention, and Mitigation B Appendix B to Part 162 Commodity and Securities... Detection, Prevention, and Mitigation Section 162.30 requires each financial institution or creditor that...