Non-consumptive predator effects shape honey bee foraging and recruitment dancing.

PubMed

Bray, Allison; Nieh, James

2014-01-01

Predators can reduce bee pollination and plant fitness through successful predation and non-consumptive effects. In honey bees, evidence of predation or a direct attack can decrease recruitment dancing and thereby magnify the effects of individual predation attempts at a colony level. However, actual predation attempts and successes are relatively rare. It was not known if a far more common event, just detection of a predator, could inhibit recruitment. We began by testing honey bees' avoidance of the praying mantis (Tenodera sinensis). Larger predators (later mantis instars, ≥4.5 cm in body length) elicited significantly more avoidance (1.3 fold) than smaller mantis instars. Larger instars also attempted to capture honey bees significantly more often than did smaller instars. Foragers could detect and avoid mantises based upon mantis odor (74% of bees avoided an odor extract) or visual appearance (67% avoided a mantis model). Finally, foragers decreased recruitment dancing by 1.8 fold for a food source with a live adult mantis, even when they were not attacked. This reduction in recruitment dancing, elicited by predator presence alone, expands our understanding of predator non-consumptive effects and of cascading ecosystem effects for plants served by an important generalist pollinator.

Non-Consumptive Predator Effects Shape Honey Bee Foraging and Recruitment Dancing

PubMed Central

Bray, Allison; Nieh, James

2014-01-01

Predators can reduce bee pollination and plant fitness through successful predation and non-consumptive effects. In honey bees, evidence of predation or a direct attack can decrease recruitment dancing and thereby magnify the effects of individual predation attempts at a colony level. However, actual predation attempts and successes are relatively rare. It was not known if a far more common event, just detection of a predator, could inhibit recruitment. We began by testing honey bees' avoidance of the praying mantis (Tenodera sinensis). Larger predators (later mantis instars, ≥4.5 cm in body length) elicited significantly more avoidance (1.3 fold) than smaller mantis instars. Larger instars also attempted to capture honey bees significantly more often than did smaller instars. Foragers could detect and avoid mantises based upon mantis odor (74% of bees avoided an odor extract) or visual appearance (67% avoided a mantis model). Finally, foragers decreased recruitment dancing by 1.8 fold for a food source with a live adult mantis, even when they were not attacked. This reduction in recruitment dancing, elicited by predator presence alone, expands our understanding of predator non-consumptive effects and of cascading ecosystem effects for plants served by an important generalist pollinator. PMID:24475292

Audition in the praying mantis, Mantis religiosa L.: identification of an interneuron mediating ultrasonic hearing.

PubMed

Yager, D D; Hoy, R R

1989-08-01

1. The praying mantis possesses a single ear located in the ventral midline of the metathorax. We have studied the mantis' auditory nervous system using both extracellular and intracellular techniques and have identified anatomically and physiologically a mirror-image pair of interneurons (MR-501-T3) in the metathoracic ganglion that mediates ultrasonic hearing. 2. MR-501-T3 is tuned broadly to ultrasound with best sensitivity (55-60 dB SPL) between 25 and 45 kHz. Its tuning matches closely that of the whole tympanal nerve. 3. The physiological responses of MR-501-T3 are characterized by: (1) a phasic-tonic firing pattern with a distinctive initial burst at 500-800 spikes/s; (2) minimum latencies of 8-12 ms; (3) no spontaneous activity; (4) sigmoid intensity response curves with a small (10 dB) dynamic range; (5) accurate coding of stimulus duration and of repetition rates up to 60 pps. 4. The ascending axon of MR-501-T3 conducts action potentials at 4 m/s, a rate comparable with some giant fiber systems. 5. MR-501-T3 shows no directional capability. Sound from right and left produce identical responses in both cells of the pair. Neither cutting one tympanal nerve nor removing one hemi-ear leads to different responses in the two cells indicating that they must receive a common input, either from the auditory afferents or from interneurons. We present evidence that the two cells are not directly connected. 6. MR-501-T3 is a large, symmetrical cell with its processes primarily in the intermediate neuropil (lateral ring tract). Its integration segment crosses the midline in the supramedian commissure, and the cell body lies dorsally near the entrance of the leg nerve. The axon travels in the dorsal lateral tract and is one of the largest (17 microns) in the connective. 7. Given the strong anatomical similarities between MR-501-T3 and the G and B cells of the locust, these cells may be homologous. 8. We present arguments based on our physiological results and existing behavioral data that MR-501-T3 is part of an ultrasonic warning/escape system in the mantis. As in moths, lacewings, and crickets, this system may provide a defense against nocturnally foraging bats.

The midline metathoracic ear of the praying mantis, Mantis religiosa.

PubMed

Yager, D D; Hoy, R R

1987-12-01

The praying mantis, Mantis religiosa, is unique in possessing a single, tympanal auditory organ located in the ventral midline of its body between the metathoracic coxae. The ear is in a deep groove and consists of two tympana facing each other and backed by large air sacs. Neural transduction takes place in a structure at the anterior end of the groove. This tympanal organ contains 32 chordotonal sensilla organized into three groups, two of which are 180 degrees out of line with the one attaching directly to the tympanum. Innervation is provided by Nerve root 7 from the metathoracic ganglion. Cobalt backfills show that the auditory neuropile is a series of finger-like projections terminating ipsilaterally near the midline, primarily near DC III and SMC. The auditory neuropile thus differs from the pattern common to all other insects previously studied.

Natural Models for Autonomous Control of Spatial Navigation, Sensing, and Guidance

DTIC Science & Technology

2013-06-26

mantis shrimp, inspired largely by our efforts, can be found at: The Oatmeal - http://theoatmeal.com/ comics /mantis_shrimp. Courtesy of these guys...Ecology and Environmental Education (20-21 January, Tainan, Taiwan). 14 M How, NJ Marshall 2012 Polarisation vision, an unexplored channel for

Evolution of mantis shrimps (Stomatopoda, Malacostraca) in the light of new Mesozoic fossils

PubMed Central

2010-01-01

Background We describe new specimens of Mesozoic mantis shrimps (Stomatopoda, Malacostraca) that exhibit morphological and developmental information previously unknown. Results Specimens assigned to the taxon Sculda exhibit preserved pleopods, thoracopods including all four raptorial limbs as well as details of antennae and antennulae. The pleopods and the antennulae resemble those of the modern mantis shrimps, but the raptorial limbs are not as differentiated as in the modern species. In some specimens, the first raptorial limb (second thoracopod) is not significantly larger than the similar-sized posterior three pairs (as in extant species), but instead these appendages become progressively smaller along the series. In this respect they resemble certain Palaeozoic stomatopods. Another specimen, most likely belonging to another species, has one pair of large anterior raptorial thoracopods, a median-sized pair and two more pairs of small-sized raptorial appendages and, thus, shows a new, previously unknown type of morphology. A single specimen of Pseudosculda laevis also exhibits the size of the raptorial limbs; they are differentiated as in modern species, one large pair and three small pairs. Furthermore, we report additional larval specimens and show also post-larval changes, e.g., of the tail fan. Conclusions These new data are used to reconsider the phylogeny of Stomatopoda. We still need a strict taxonomical revision of the Mesozoic mantis shrimps, but this first examination already demonstrates the importance of these fossils for understanding mantis shrimp evolution and the interpretation of evolutionary pathways of particular features. PMID:20858249

Understanding the Function of Circular Polarisation Vision in Mantis Shrimps: Building a C-Pol Camera

DTIC Science & Technology

2008-10-24

instrumentation from hand-held to remote sensing (RS) and used to address problems such as coral bleaching or algal blooms. Very recent work has...Fig.1 A mantis shrimp looking out from the front entrance of its burrow. This and other species live on coral reefs and in other shallow

Rediscovery of Mantellias pubicornis Westwood, 1889, a rare praying mantis from the Amazon (Mantodea, Thespidae, Oligonicinae).

PubMed

Maldaner, Caroline; Agudelo, Antonio A; Rafael, José Albertino

2015-06-16

Many praying mantis species remain known from type specimens only. The majority of these taxa have vague taxonomic limits, as original descriptions are often very short, making strong emphasis on superficial characters (Rivera 2010). One clear example of this is the Amazonian Mantellias Westwood, 1889, a monotypical genus represented by Mantellias pubicornis Westwood, 1889.

The Manti, Utah, landslide

USGS Publications Warehouse

Fleming, R.W.; Johnson, R.B.; Schuster, R.L.; Williams, G.P.

1988-01-01

PART A: The Manti landslide is in Manti Canyon on the west side of the Wasatch Plateau in central Utah. In early June 1974, coincident with the melting of a snowpack, a rock slump/debris flow occurred on the south rim of Manti Canyon. Part of the slumped material mixed with meltwater and mobilized into a series of debris flows that traveled down the slope a distance of as much as 1.2 km. Most of the flows were deposited either at the base of the steep rocks of the canyon rim or at the site of an old, silted reservoir. A small part of the debris flow deposit stopped on the head of the very large, relatively inactive Manti landslide. The upper part of the landslide began moving as cracks propagated downslope. A little more than a year later, August 1975, movement extended the full length of the old landslide, and about 19 million m 3 of debris about 3 km long and as much as 800 m wide threatened to block the canyon. The upper part of the landslide apparently had moved small amounts between 1939 and 1974. This part of the landslide, identifiable on pre-1974 aerial photographs, consisted of well-defined linears on the landslide flanks and two large internal toe bulges about 2 km downslope from the head. The abrupt reactivation in 1974 proceeded quickly after the debris flows had provided a surcharge in the head and crown area. Movement propagated downslope at 4-5 m/h for the first few days following reactivation. During 1974, the reactivation probably encompassed all the parts of the landslide that had moved small amounts between 1939 and 1974. Movement nearly or completely stopped during the winter of 1974-75, but began again in the spring of 1975. The landslide enlarged from the flanks of the internal toe bulges to Manti Creek at a rate of 2-3 m/h. Movement stopped again during the winter of 1975-76 and began again in the spring of 1976. Thereafter, the displacements have been small compared to earlier. The displacement rates for the landslide were variable depending on where and when they were measured. At the waterline crossing, about 500 m downslope from the head, the maximum rate was about 1 mid, and the peak rate occurred within the first 30 days following reactivation. Almost a year later, during the spring of 1975, the rates there were 0.1-0.3 mid. By the time movement had propagated 2.5 km downslope to Manti Creek, more than 40 m of displacement had occurred at the waterline. Cracks were first noted at Manti Creek on June 21,1975, but movement was initially very slow there. The maximum rate of sliding of about 3.1 mid occurred during the period September 1-19,1975, and the movement decreased and stopped during the winter of 1975-76. At the time the lower part of the landslide was moving rapidly, the rate farther upslope was small. The result was that the landslide changed from being in compression, which was caused by loading from above, to being in extension, which was caused by the lower part moving faster than the upper part. One of the results of the extension was that the landslide pulled apart on a steeper segment of the slope and exposed the failure surface. Since the fall of 1975, the landslide has been separated into two independent parts. There has been no movement in the lower part, whereas movements in the upper part have continued at a rate of a few meters per year. Although the landslide is 6.5 km from the nearest permanent dwelling, it cost nearly $2 million in actual damages and in preparation for a major disaster that did not occur. The waterline for the city of Manti was replaced and a well was drilled to provide an emergency water supply. PART B: The Manti landslide abuts, at its toe, another large landslide called the North slide. In 1975, public officials were concerned that continued movement of the Manti landslide would trigger reactivation of the North slide. In response to this threat, four borings were placed in the North slide to obtain samples for testing and information

Feed-forward motor control of ultrafast, ballistic movements.

PubMed

Kagaya, K; Patek, S N

2016-02-01

To circumvent the limits of muscle, ultrafast movements achieve high power through the use of springs and latches. The time scale of these movements is too short for control through typical neuromuscular mechanisms, thus ultrafast movements are either invariant or controlled prior to movement. We tested whether mantis shrimp (Stomatopoda: Neogonodactylus bredini) vary their ultrafast smashing strikes and, if so, how this control is achieved prior to movement. We collected high-speed images of strike mechanics and electromyograms of the extensor and flexor muscles that control spring compression and latch release. During spring compression, lateral extensor and flexor units were co-activated. The strike initiated several milliseconds after the flexor units ceased, suggesting that flexor activity prevents spring release and determines the timing of strike initiation. We used linear mixed models and Akaike's information criterion to serially evaluate multiple hypotheses for control mechanisms. We found that variation in spring compression and strike angular velocity were statistically explained by spike activity of the extensor muscle. The results show that mantis shrimp can generate kinematically variable strikes and that their kinematics can be changed through adjustments to motor activity prior to the movement, thus supporting an upstream, central-nervous-system-based control of ultrafast movement. Based on these and other findings, we present a shishiodoshi model that illustrates alternative models of control in biological ballistic systems. The discovery of feed-forward control in mantis shrimp sets the stage for the assessment of targets, strategic variation in kinematics and the role of learning in ultrafast animals. © 2016. Published by The Company of Biologists Ltd.

Visual stimuli that elicit appetitive behaviors in three morphologically distinct species of praying mantis.

PubMed

Prete, Frederick R; Komito, Justin L; Dominguez, Salina; Svenson, Gavin; López, LeoLin Y; Guillen, Alex; Bogdanivich, Nicole

2011-09-01

We assessed the differences in appetitive responses to visual stimuli by three species of praying mantis (Insecta: Mantodea), Tenodera aridifolia sinensis, Mantis religiosa, and Cilnia humeralis. Tethered, adult females watched computer generated stimuli (erratically moving disks or linearly moving rectangles) that varied along predetermined parameters. Three responses were scored: tracking, approaching, and striking. Threshold stimulus size (diameter) for tracking and striking at disks ranged from 3.5 deg (C. humeralis) to 7.8 deg (M. religiosa), and from 3.3 deg (C. humeralis) to 11.7 deg (M. religiosa), respectively. Unlike the other species which struck at disks as large as 44 deg, T. a. sinensis displayed a preference for 14 deg disks. Disks moving at 143 deg/s were preferred by all species. M. religiosa exhibited the most approaching behavior, and with T. a. sinensis distinguished between rectangular stimuli moving parallel versus perpendicular to their long axes. C. humeralis did not make this distinction. Stimulus sizes that elicited the target behaviors were not related to mantis size. However, differences in compound eye morphology may be related to species differences: C. humeralis' eyes are farthest apart, and it has an apparently narrower binocular visual field which may affect retinal inputs to movement-sensitive visual interneurons.

Inspired Biological Engineering: Detection and Production of Polarized Light by Animals

DTIC Science & Technology

2009-05-26

polarizers in some mantis shrimps, where the animals’ cuticles combine dichroic polarizers based on the cuticular carotenoid, astaxanthin , with a... astaxanthin in animals - the first demonstration of a pigment-based polarizer intended for signaling in any biological system. We are preparing a paper for

[Identification of original species of Mantidis Oötheca (Sangpiaoxiao) based on DNA barcoding].

PubMed

Wang, Xi; Hou, Fei-xia; Wang, Yi-xuan; Wang, Yu-xian; Li, Jun-de; Yuan, Yuan; Peng, Cheng; Guo, Jin-lin

2015-10-01

Both market research and literature reports both found that the ootheca of mantodea was all used as medicine. However, Chinese Pharmacopoeia only records the ootheca of three mantis species. The clinical use of ootheca unrecorded in Chinese Pharmacopoeia, will pose potential risks to drug safety. It's urgent to identify the origin of Mantidis Oötheca. The current researches about original animal in Mantidis Oötheca are based on morphology and unanimous. DNA barcoding fill gaps of the traditional morphological identification, which is widely used in animal classification studies. This study first use DNA barcoding to analyze genetic distance among different Mantidis Oötheca types, align COI sequences between mantis and Mantidis Oötheca and construct the phylogeny tree. The result confirmed that Tenodera sinensis and Hierodula patellifera were the origin insects of Tuanpiaoxiao and Heipiaoxiao, respectively, and Statilia maculate and Mantis religiosa were the origin insects of Changpiaoxiao.

Stress physiology and weapon integrity of intertidal mantis shrimp under future ocean conditions

PubMed Central

deVries, Maya S.; Webb, Summer J.; Tu, Jenny; Cory, Esther; Morgan, Victoria; Sah, Robert L.; Deheyn, Dimitri D.; Taylor, Jennifer R. A.

2016-01-01

Calcified marine organisms typically experience increased oxidative stress and changes in mineralization in response to ocean acidification and warming conditions. These effects could hinder the potency of animal weapons, such as the mantis shrimp’s raptorial appendage. The mechanical properties of this calcified weapon enable extremely powerful punches to be delivered to prey and aggressors. We examined oxidative stress and exoskeleton structure, mineral content, and mechanical properties of the raptorial appendage and the carapace under long-term ocean acidification and warming conditions. The predatory appendage had significantly higher % Mg under ocean acidification conditions, while oxidative stress levels as well as the % Ca and mechanical properties of the appendage remained unchanged. Thus, mantis shrimp tolerate expanded ranges of pH and temperature without experiencing oxidative stress or functional changes to their weapons. Our findings suggest that these powerful predators will not be hindered under future ocean conditions. PMID:27974830

MIROS: A Hybrid Real-Time Energy-Efficient Operating System for the Resource-Constrained Wireless Sensor Nodes

PubMed Central

Liu, Xing; Hou, Kun Mean; de Vaulx, Christophe; Shi, Hongling; Gholami, Khalid El

2014-01-01

Operating system (OS) technology is significant for the proliferation of the wireless sensor network (WSN). With an outstanding OS; the constrained WSN resources (processor; memory and energy) can be utilized efficiently. Moreover; the user application development can be served soundly. In this article; a new hybrid; real-time; memory-efficient; energy-efficient; user-friendly and fault-tolerant WSN OS MIROS is designed and implemented. MIROS implements the hybrid scheduler and the dynamic memory allocator. Real-time scheduling can thus be achieved with low memory consumption. In addition; it implements a mid-layer software EMIDE (Efficient Mid-layer Software for User-Friendly Application Development Environment) to decouple the WSN application from the low-level system. The application programming process can consequently be simplified and the application reprogramming performance improved. Moreover; it combines both the software and the multi-core hardware techniques to conserve the energy resources; improve the node reliability; as well as achieve a new debugging method. To evaluate the performance of MIROS; it is compared with the other WSN OSes (TinyOS; Contiki; SOS; openWSN and mantisOS) from different OS concerns. The final evaluation results prove that MIROS is suitable to be used even on the tight resource-constrained WSN nodes. It can support the real-time WSN applications. Furthermore; it is energy efficient; user friendly and fault tolerant. PMID:25248069

MIROS: a hybrid real-time energy-efficient operating system for the resource-constrained wireless sensor nodes.

PubMed

Liu, Xing; Hou, Kun Mean; de Vaulx, Christophe; Shi, Hongling; El Gholami, Khalid

2014-09-22

Operating system (OS) technology is significant for the proliferation of the wireless sensor network (WSN). With an outstanding OS; the constrained WSN resources (processor; memory and energy) can be utilized efficiently. Moreover; the user application development can be served soundly. In this article; a new hybrid; real-time; memory-efficient; energy-efficient; user-friendly and fault-tolerant WSN OS MIROS is designed and implemented. MIROS implements the hybrid scheduler and the dynamic memory allocator. Real-time scheduling can thus be achieved with low memory consumption. In addition; it implements a mid-layer software EMIDE (Efficient Mid-layer Software for User-Friendly Application Development Environment) to decouple the WSN application from the low-level system. The application programming process can consequently be simplified and the application reprogramming performance improved. Moreover; it combines both the software and the multi-core hardware techniques to conserve the energy resources; improve the node reliability; as well as achieve a new debugging method. To evaluate the performance of MIROS; it is compared with the other WSN OSes (TinyOS; Contiki; SOS; openWSN and mantisOS) from different OS concerns. The final evaluation results prove that MIROS is suitable to be used even on the tight resource-constrained WSN nodes. It can support the real-time WSN applications. Furthermore; it is energy efficient; user friendly and fault tolerant.

Conceptual design and proof-of-principle testing of the real-time multispectral imaging system MANTIS

NASA Astrophysics Data System (ADS)

Vijvers, W. A. J.; Mumgaard, R. T.; Andrebe, Y.; Classen, I. G. J.; Duval, B. P.; Lipschultz, B.

2017-12-01

The Multispectral Advanced Narrowband Tokamak Imaging System (MANTIS) is proposed to resolve the steep temperature and density gradients in the scrape-off layer of tokamaks in real-time. The initial design is to deliver two-dimensional distributions of key plasma parameters of the TCV tokamak to a real-time control system in order to enable novel control strategies, while providing new insights into power exhaust physics in the full offline analysis. This paper presents the conceptual system design, the mechanical and optical design of a prototype that was built to assess the optical performance, and the results of the first proof-of-principle tests of the prototype. These demonstrate a central resolving power of 50-46 line pairs per millimeter (CTF50) in the first four channels. For the additional channels, the sharpness is a factor two worse for the odd channels (likely affected by sub-optimal alignment), while the even channels continue the trend observed for the first four channels of 3% degradation per channel. This is explained by the self-cancellation of off-axis aberrations, which is an attractive property of the chosen optical design. The results show that at least a 10-channel real-time multispectral imaging system is feasible.

Behavioral variation post-invasion: resemblance in some, but not all, behavioral patterns among invasive and native praying mantids.

PubMed

Jones, Cameron; DiRienzo, Nicolas

2018-05-23

Animal invasions can be devastating for native species. Behavioral variation is known to influence animal invasions, yet comparatively less is known about how behavioral variation influences invasive-native species interactions. Here we examined how the mean and variance surrounding several behavioral traits in two sympatric species of praying mantis differ and how these behavioral types translate to actual prey capture success using the introduced European mantis, Mantis religiosa, and the native bordered mantis, Stagmomantis limbata. We assayed time spent in the open (risk proneness), response towards a novel prey, and voracity within a population of M. religiosa and S. limbata. We found that the native and invasive mantids displayed no differences in their average behavioral tendencies. The native exhibited significant levels of repeatability in voracity while the invasive did not. The lack of repeatability in the invasive appears to be driven by lower levels of among-individual variation in voracity. This may have evolutionary consequences for native S. limbata if it results in strong selection in native levels of mean and among-individual variation. Significant levels of among-individual differences were found in other behaviors (response to a novel prey and risk proneness) across species, suggesting less selection on invasive behavioral variation in these traits. Risk proneness and response towards a novel prey also formed a behavioral syndrome across species, yet neither behavior was correlated with voracity in either species. Our results illustrate the need to examine the ecological effects of behavioral variation of both invasive and native species to determine how that might impact invasive-native interactions. Copyright © 2018 Elsevier B.V. All rights reserved.

Isotopic incorporation rates and discrimination factors in mantis shrimp crustaceans.

PubMed

deVries, Maya S; Del Rio, Carlos Martínez; Tunstall, Tate S; Dawson, Todd E

2015-01-01

Stable isotope analysis has provided insights into the trophic ecology of a wide diversity of animals. Knowledge about isotopic incorporation rates and isotopic discrimination between the consumer and its diet for different tissue types is essential for interpreting stable isotope data, but these parameters remain understudied in many animal taxa and particularly in aquatic invertebrates. We performed a 292-day diet shift experiment on 92 individuals of the predatory mantis shrimp, Neogonodactylus bredini, to quantify carbon and nitrogen incorporation rates and isotope discrimination factors in muscle and hemolymph tissues. Average isotopic discrimination factors between mantis shrimp muscle and the new diet were 3.0 ± 0.6 ‰ and 0.9 ± 0.3 ‰ for carbon and nitrogen, respectively, which is contrary to what is seen in many other animals (e.g. C and N discrimination is generally 0-1 ‰ and 3-4 ‰, respectively). Surprisingly, the average residence time of nitrogen in hemolymph (28.9 ± 8.3 days) was over 8 times longer than that of carbon (3.4 ± 1.4 days). In muscle, the average residence times of carbon and nitrogen were of the same magnitude (89.3 ± 44.4 and 72.8 ± 18.8 days, respectively). We compared the mantis shrimps' incorporation rates, along with rates from four other invertebrate taxa from the literature, to those predicted by an allometric equation relating carbon incorporation rate to body mass that was developed for teleost fishes and sharks. The rate of carbon incorporation into muscle was consistent with rates predicted by this equation. Our findings provide new insight into isotopic discrimination factors and incorporation rates in invertebrates with the former showing a different trend than what is commonly observed in other animals.

Isotopic Incorporation Rates and Discrimination Factors in Mantis Shrimp Crustaceans

PubMed Central

deVries, Maya S.; del Rio, Carlos Martínez; Tunstall, Tate S.; Dawson, Todd E.

2015-01-01

Stable isotope analysis has provided insights into the trophic ecology of a wide diversity of animals. Knowledge about isotopic incorporation rates and isotopic discrimination between the consumer and its diet for different tissue types is essential for interpreting stable isotope data, but these parameters remain understudied in many animal taxa and particularly in aquatic invertebrates. We performed a 292-day diet shift experiment on 92 individuals of the predatory mantis shrimp, Neogonodactylus bredini, to quantify carbon and nitrogen incorporation rates and isotope discrimination factors in muscle and hemolymph tissues. Average isotopic discrimination factors between mantis shrimp muscle and the new diet were 3.0 ± 0.6 ‰ and 0.9 ± 0.3 ‰ for carbon and nitrogen, respectively, which is contrary to what is seen in many other animals (e.g. C and N discrimination is generally 0–1 ‰ and 3–4 ‰, respectively). Surprisingly, the average residence time of nitrogen in hemolymph (28.9 ± 8.3 days) was over 8 times longer than that of carbon (3.4 ± 1.4 days). In muscle, the average residence times of carbon and nitrogen were of the same magnitude (89.3 ± 44.4 and 72.8 ± 18.8 days, respectively). We compared the mantis shrimps’ incorporation rates, along with rates from four other invertebrate taxa from the literature, to those predicted by an allometric equation relating carbon incorporation rate to body mass that was developed for teleost fishes and sharks. The rate of carbon incorporation into muscle was consistent with rates predicted by this equation. Our findings provide new insight into isotopic discrimination factors and incorporation rates in invertebrates with the former showing a different trend than what is commonly observed in other animals. PMID:25835953

Role of a looming-sensitive neuron in triggering the defense behavior of the praying mantis Tenodera aridifolia.

PubMed

Sato, Keiichiro; Yamawaki, Yoshifumi

2014-08-01

In responses to looming objects, the praying mantis shows a defense behavior, which consists of retracting forelegs under the prothorax. The role of a looming-sensitive neuron in triggering this behavior was investigated by simultaneously recording the activity and behavioral responses of the neuron. The mantis initiated the defense behavior earlier in response to larger and slower looming stimuli. The time remaining to collision at defense initiation was linearly correlated with the ratio of the half-size of an approaching object to its speed (l/|v|), suggesting that the defense behavior occurred a fixed delay after the stimuli had reached a fixed angular threshold. Furthermore, the results suggested that high-frequency spikes of the looming-sensitive neuron were involved in triggering the defense behavior: the distribution of maximum firing rate for trials with defense was shifted to larger rates compared with trials without defense; the firing rate of the neuron exceeded 150 Hz ∼100 ms before the defense initiation regardless of stimulus parameters; when a looming stimulus ceased approach prematurely, high-frequency spikes were removed, and the occurrence of defense was reduced. Copyright © 2014 the American Physiological Society.

Praying Mantis Bending Core Breakoff and Retention Mechanism

NASA Technical Reports Server (NTRS)

Badescu, Mircea; Sherrit, Stewart; Bar-Cohen, Yoseph; Bao, Xiaoqi; Lindermann, Randel A.

2011-01-01

Sampling cores requires the controlled breakoff of the core at a known location with respect to the drill end. An additional problem is designing a mechanism that can be implemented at a small scale, yet is robust and versatile enough to be used for a variety of core samples. The new design consists of a set of tubes (a drill tube, an outer tube, and an inner tube) and means of sliding the inner and outer tubes axially relative to each other. Additionally, a sample tube can be housed inside the inner tube for storing the sample. The inner tube fits inside the outer tube, which fits inside the drill tube. The inner and outer tubes can move axially relative to each other. The inner tube presents two lamellae with two opposing grabbing teeth and one pushing tooth. The pushing tooth is offset axially from the grabbing teeth. The teeth can move radially and their motion is controlled by the outer tube. The outer tube presents two lamellae with radial extrusions to control the inner tube lamellae motion. In breaking the core, the mechanism creates two support points (the grabbing teeth and the bit tip) and one push point. The core is broken in bending. The grabbing teeth can also act as a core retention mechanism. The praying mantis that is disclosed herein is an active core breaking/retention mechanism that requires only one additional actuator other than the drilling actuator. It can break cores that are attached to the borehole bottom as

Behavioral responses of big brown bats to dives by praying mantises.

PubMed

Ghose, Kaushik; Triblehorn, Jeffrey D; Bohn, Kari; Yager, David D; Moss, Cynthia F

2009-03-01

Insectivorous echolocating bats face a formidable array of defenses employed by their airborne prey. One such insect defense is the ultrasound-triggered dive, which is a sudden, rapid drop in altitude, sometimes all the way to the ground. Although many previous studies have investigated the dynamics of such dives and their effect on insect survival rate, there has been little work on how bats may adapt to such an insect defense employed in the middle of pursuit. In this study we investigated how big brown bats (Eptesicus fuscus) adjust their pursuit strategy when flying praying mantises (Parasphendale agrionina) execute evasive, ultrasound-triggered dives. Although the mantis dive occasionally forced the bat to completely abort its chase (25% trials), in a number of cases (75% trials) the bat followed the mantis into the dive. In such cases the bat kept its sonar beam locked onto the target and maneuvered to maintain the same time efficient strategy it adopted during level flight pursuit, though it was ultimately defeated by the dive. This study suggests that although the mantis dive can be effective in evading the bat, it does not always deter the bat from continuing pursuit and, given enough altitude, the bat can potentially capture diving prey using the same flight strategy it employs to intercept prey in level flight.

Spectral Sensitivity Studies on the Visual System of the Praying Mantis, Tenodera sinensis

PubMed Central

Sontag, Charles

1971-01-01

In these studies a constant ERG response was used as a measure of visual sensitivity to different wavelengths of light. The dark-adapted compound eye of Tenodera sinensis is dominated by a single class of photoreceptors. with a major peak of sensitivity at about 510–520 nm, and with a minor peak of sensitivity in the near-ultraviolet region at about 370 nm. The dark-adapted dorsal ocellus does not contain a homogeneous population of sensory receptors. The sensitivity function of the dark-adapted ocellus to longer wavelength light (yellow and red) is determined by a single receptor with a major peak of sensitivity in the green at 510–520 nm with some sensitivity in the near-ultraviolet. Sensitivity at shorter wavelengths (near-ultraviolet and blue), however, involves the stimulation of both this and a near-ultraviolet-sensitive receptor with a maximum sensitivity at about 370 nm. Anatomically, the sensory cells of the dorsal ocellus of Tenodera were determined histologically to be grouped into two distinct regions, each group making its own separate contribution to the ocellar nerve. This may represent the separation of two different photoreceptor types in the ocellus of the mantis. PMID:5539340

Manual of praying mantis morphology, nomenclature, and practices (Insecta, Mantodea)

PubMed Central

Brannoch, Sydney K.; Wieland, Frank; Rivera, Julio; Klass, Klaus-Dieter; Olivier Béthoux; Svenson, Gavin J.

2017-01-01

Abstract This study provides a comprehensive review of historical morphological nomenclature used for praying mantis (Mantodea) morphology, which includes citations, original use, and assignment of homology. All referenced structures across historical works correspond to a proposed standard term for use in all subsequent works pertaining to praying mantis morphology and systematics. The new standards are presented with a verbal description in a glossary as well as indicated on illustrations and images. In the vast majority of cases, originally used terms were adopted as the new standard. In addition, historical morphological topographical homology conjectures are considered with discussion on modern interpretations. A new standardized formulation to present foreleg femoral and tibial spines is proposed for clarity based on previous works. In addition, descriptions for methods of collection, curation, genital complex dissection, and labeling are provided to aid in the proper preservation and storage of specimens for longevity and ease of study. Due to the lack of consistent linear morphometric measurement practices in the literature, we have proposed a series of measurements for taxonomic and morphological research. These measurements are presented with figures to provide visual aids with homologous landmarks to ensure compatibility and comparability across the Order. Finally, our proposed method of pinning mantises is presented with a photographical example as well as a video tutorial available at http://mantodearesearch.com. PMID:29200926

Behavioral responses of big brown bats to dives by praying mantises

PubMed Central

Ghose, Kaushik; Triblehorn, Jeffrey D.; Bohn, Kari; Yager, David D.; Moss, Cynthia F.

2009-01-01

Summary Insectivorous echolocating bats face a formidable array of defenses employed by their airborne prey. One such insect defense is the ultrasound-triggered dive, which is a sudden, rapid drop in altitude, sometimes all the way to the ground. Although many previous studies have investigated the dynamics of such dives and their effect on insect survival rate, there has been little work on how bats may adapt to such an insect defense employed in the middle of pursuit. In this study we investigated how big brown bats (Eptesicus fuscus) adjust their pursuit strategy when flying praying mantises (Parasphendale agrionina) execute evasive, ultrasound-triggered dives. Although the mantis dive occasionally forced the bat to completely abort its chase (25% trials), in a number of cases (75% trials) the bat followed the mantis into the dive. In such cases the bat kept its sonar beam locked onto the target and maneuvered to maintain the same time efficient strategy it adopted during level flight pursuit, though it was ultimately defeated by the dive. This study suggests that although the mantis dive can be effective in evading the bat, it does not always deter the bat from continuing pursuit and, given enough altitude, the bat can potentially capture diving prey using the same flight strategy it employs to intercept prey in level flight. PMID:19218521

Map showing selected surface-water data for the Manti 30 x 60-minute Quadrangle, Utah

USGS Publications Warehouse

Price, Don

1984-01-01

This is one of a series of maps that describe the geology and related natural resources of the Manti 30 x 60 minute quadrangle. Streamflow records used to compile this map were collected by the U.S. Geological Survey in cooperation with the Utah Department of Natural Resources, Division of Water Rights, and the Utah Department of Transportation. The principal runoff-producing areas shown on the map were delineated from a work map (scale 1:250,000) compiled to estimate water yields in Utah (Bagley and others, 1964). Sources of information about recorded floods resulting from cloudbursts included Woolley (1946) and Butler and Marsell (1972); sources of information about the chemical quality of streamflow included Hahl and Cabell (1965) and Mundorff and Thompson (1982).

The complete mitochondrial genome of the stomatopod crustacean Squilla mantis

PubMed Central

Cook, Charles E

2005-01-01

Background Animal mitochondrial genomes are physically separate from the much larger nuclear genomes and have proven useful both for phylogenetic studies and for understanding genome evolution. Within the phylum Arthropoda the subphylum Crustacea includes over 50,000 named species with immense variation in body plans and habitats, yet only 23 complete mitochondrial genomes are available from this subphylum. Results I describe here the complete mitochondrial genome of the crustacean Squilla mantis (Crustacea: Malacostraca: Stomatopoda). This 15994-nucleotide genome, the first described from a hoplocarid, contains the standard complement of 13 protein-coding genes, 22 transfer RNA genes, two ribosomal RNA genes, and a non-coding AT-rich region that is found in most other metazoans. The gene order is identical to that considered ancestral for hexapods and crustaceans. The 70% AT base composition is within the range described for other arthropods. A single unusual feature of the genome is a 230 nucleotide non-coding region between a serine transfer RNA and the nad1 gene, which has no apparent function. I also compare gene order, nucleotide composition, and codon usage of the S. mantis genome and eight other malacostracan crustaceans. A translocation of the histidine transfer RNA gene is shared by three taxa in the order Decapoda, infraorder Brachyura; Callinectes sapidus, Portunus trituberculatus and Pseudocarcinus gigas. This translocation may be diagnostic for the Brachyura. For all nine taxa nucleotide composition is biased towards AT-richness, as expected for arthropods, and is within the range reported for other arthropods. Codon usage is biased, and much of this bias is probably due to the skew in nucleotide composition towards AT-richness. Conclusion The mitochondrial genome of Squilla mantis contains one unusual feature, a 230 base pair non-coding region has so far not been described in any other malacostracan. Comparisons with other Malacostraca show that all nine genomes, like most other mitochondrial genomes, share a bias toward AT-richness and a related bias in codon usage. The nine malacostracans included in this analysis are not representative of the diversity of the class Malacostraca, and additional malacostracan sequences would surely reveal other unusual genomic features that could be useful in understanding mitochondrial evolution in this taxon. PMID:16091132

The Mantis Project.

ERIC Educational Resources Information Center

Palopoli, Maria L.

1998-01-01

Explains an integrated insect unit in which students learn about the characteristics, life cycle, and environment of an organism; learn about specific body structures; and make inferences about the body structure and behaviors of the insects. (DDR)

75 FR 62364 - Manti-La Sal National Forest Resource Advisory Committee; Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-08

... who use telecommunication devices for the deaf (TDD) may call the Federal Information Relay Service... conducted: (1) Consideration of Proposal Forms, (2) Development of Proposal Review Process, (3) Development...

An insect-like mushroom body in a crustacean brain

PubMed Central

Wolff, Gabriella Hannah; Thoen, Hanne Halkinrud; Marshall, Justin; Sayre, Marcel E

2017-01-01

Mushroom bodies are the iconic learning and memory centers of insects. No previously described crustacean possesses a mushroom body as defined by strict morphological criteria although crustacean centers called hemiellipsoid bodies, which serve functions in sensory integration, have been viewed as evolutionarily convergent with mushroom bodies. Here, using key identifiers to characterize neural arrangements, we demonstrate insect-like mushroom bodies in stomatopod crustaceans (mantis shrimps). More than any other crustacean taxon, mantis shrimps display sophisticated behaviors relating to predation, spatial memory, and visual recognition comparable to those of insects. However, neuroanatomy-based cladistics suggesting close phylogenetic proximity of insects and stomatopod crustaceans conflicts with genomic evidence showing hexapods closely related to simple crustaceans called remipedes. We discuss whether corresponding anatomical phenotypes described here reflect the cerebral morphology of a common ancestor of Pancrustacea or an extraordinary example of convergent evolution. PMID:28949916

Fourth - generation languages. Volume 2. Representative 4GLs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Martin, J.

1986-01-01

The chapters in Part II each describe one representative product marketed by a vendor other than IBM. (Volume III of this work covers IBM languages.) The chapters in Part II cover the following 4GLs: ADS/ONLINE, APPLICATION FACTORY, DATATRIEVE, FOCUS, IDEAL, INTELLECT, MANTIS, MIMER, NATURAL, NOMAD2, RAMIS II, SYSTEM W, and USE-IT. The Perspective section of Part II presents a general overview of the product and describes its role in the marketplace. The Tutorial section describes how a user employs the language in application development.

Characterization of the ITER model negative ion source during long pulse operation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hemsworth, R.S.; Boilson, D.; Crowley, B.

2006-03-15

It is foreseen to operate the neutral beam system of the International Thermonuclear Experimental Reactor (ITER) for pulse lengths extending up to 1 h. The performance of the KAMABOKO III negative ion source, which is a model of the source designed for ITER, is being studied on the MANTIS test bed at Cadarache. This article reports the latest results from the characterization of the ion source, in particular electron energy distribution measurements and the comparison between positive ion and negative ion extraction from the source.

Fatal attraction: sexually cannibalistic invaders attract naive native mantids

PubMed Central

Fea, Murray P.; Stanley, Margaret C.; Holwell, Gregory I.

2013-01-01

Overlap in the form of sexual signals such as pheromones raises the possibility of reproductive interference by invasive species on similar, yet naive native species. Here, we test the potential for reproductive interference through heterospecific mate attraction and subsequent predation of males by females of a sexually cannibalistic invasive praying mantis. Miomantis caffra is invasive in New Zealand, where it is widely considered to be displacing the only native mantis species, Orthodera novaezealandiae, and yet mechanisms behind this displacement are unknown. We demonstrate that native males are more attracted to the chemical cues of introduced females than those of conspecific females. Heterospecific pairings also resulted in a high degree of mortality for native males. This provides evidence for a mechanism behind displacement that has until now been undetected and highlights the potential for reproductive interference to greatly influence the impact of an invasive species. PMID:24284560

Madeirasquilla tuerkayi, a new genus and species of mantis shrimps from Madeira Island, eastern Atlantic (Crustacea: Stomatopoda: Nannosquillidae).

PubMed

ĎuriŠ, ZdenĚk

2018-03-22

Madeirasquilla tuerkayi is described as a new genus and species of the nannosquillid mantis shrimps (Stomatopoda) based on a single specimen collected from Madeira, eastern Atlantic. That specimen is remarkable by a combination of the following morphological characters: rostral plate with three sharp anterior projections; antennal protopod with two mesial and one ventral papillae; cornea subglobular; raptorial claw dactylus with 11 or 12 teeth, and with acute proximal tooth on outer margin; pleonite 6 with strong posterolateral spine and two posteriorly directed sternal spines; telson bearing smooth shield-like dorsal prominence with acute median spine posteriorly; four pairs of fixed primary teeth posteriorly on the telson; outer primary spine of uropodal protopod longer than inner primary spine. The separate position of the new genus is supported also by molecular comparison. A key to the genera of the family Nannosquillidae is proposed.

Specialized morphology corresponds to a generalist diet: linking form and function in smashing mantis shrimp crustaceans.

PubMed

deVries, Maya S; Stock, Brian C; Christy, John H; Goldsmith, Gregory R; Dawson, Todd E

2016-10-01

Many animals are considered to be specialists because they have feeding structures that are fine-tuned for consuming specific prey. For example, "smasher" mantis shrimp have highly specialized predatory appendages that generate forceful strikes to break apart hard-shelled prey. Anecdotal observations suggest, however, that the diet of smashers may include soft-bodied prey as well. Our goal was to examine the diet breadth of the smasher mantis shrimp, Neogonodactylus bredini, to determine whether it has a narrow diet of hard-shelled prey. We combined studies of prey abundance, feeding behavior, and stable isotope analyses of diet in both seagrass and coral rubble to determine if N. bredini's diet was consistent across different habitat types. The abundances of hard-shelled and soft-bodied prey varied between habitats. In feeding experiments, N. bredini consumed both prey types. N. bredini consumed a range of different prey in the field as well and, unexpectedly, the stable isotope analysis demonstrated that soft-bodied prey comprised a large proportion (29-53 %) of the diet in both habitats. Using a Bayesian mixing model framework (MixSIAR), we found that this result held even when we used uninformative, or generalist, priors and informative priors reflecting a specialist diet on hard-shelled prey and prey abundances in the field. Thus, contrary to expectation, the specialized feeding morphology of N. bredini corresponds to a broad diet of both hard-shelled and soft-bodied prey. Using multiple lines of study to describe the natural diets of other presumed specialists may demonstrate that specialized morphology often broadens rather than narrows diet breadth.

Small or far away? Size and distance perception in the praying mantis

PubMed Central

Bissianna, Geoffrey

2016-01-01

Stereo or ‘3D’ vision is an important but costly process seen in several evolutionarily distinct lineages including primates, birds and insects. Many selective advantages could have led to the evolution of stereo vision, including range finding, camouflage breaking and estimation of object size. In this paper, we investigate the possibility that stereo vision enables praying mantises to estimate the size of prey by using a combination of disparity cues and angular size cues. We used a recently developed insect 3D cinema paradigm to present mantises with virtual prey having differing disparity and angular size cues. We predicted that if they were able to use these cues to gauge the absolute size of objects, we should see evidence for size constancy where they would strike preferentially at prey of a particular physical size, across a range of simulated distances. We found that mantises struck most often when disparity cues implied a prey distance of 2.5 cm; increasing the implied distance caused a significant reduction in the number of strikes. We, however, found no evidence for size constancy. There was a significant interaction effect of the simulated distance and angular size on the number of strikes made by the mantis but this was not in the direction predicted by size constancy. This indicates that mantises do not use their stereo vision to estimate object size. We conclude that other selective advantages, not size constancy, have driven the evolution of stereo vision in the praying mantis. This article is part of the themed issue ‘Vision in our three-dimensional world’. PMID:27269605

Heavy metal concentrations in Squilla mantis (L.) (Crustacea, Stomatopoda) from the gulf of cadiz evaluation of the impact of the Aznalcollar mining spill.

PubMed

Blasco, J; Arias, A M; Sáenz, V

2002-04-01

After the Aznalcóllar mining spill (25th April 1998), considerable social concern arose amongst the inhabitants of the SW Iberian Peninsula concerning the consumption of local seafood. Squilla mantis was collected in four regions of the Gulf of Cádiz with a dual objective: to analyze the heavy metal levels for human consumption and as part of biomonitoring program. Heavy metal concentrations (Fe, Mn, Zn, Cu, Cd and Pb) were analyzed in soft tissues and cuticle. The highest values were found in the soft tissues for zinc, copper and cadmium and in the cuticle for iron, manganese and lead. The mean copper concentration in the soft tissue, corresponding to the edible part, was 27.1 microg x g(-1) wet weight. Approximately 80% of stations showed values higher than 20 microg x g(-1) wet weight of copper, the Spanish legal limit for the concentration of this metal in the crustacean for human consumption. For Zn and Cu no significant differences were found between regions, probably related with the capacity for regulation of S. mantis. The highest values found for copper in the Gulf of Cádiz compared to other areas is likely to be related with contamination from terrestrial mining activities (copper and pyrites) in the region, dating back to the times of Tartessians and Romans, rather than the effects of mining spill which was shown not to create any significant increases in heavy metal concentrations of organisms of the Guadalquivir River or the adjacent coastal area.

Project MANTIS: A MANTle Induction Simulator for coupling geodynamic and electromagnetic modeling

NASA Astrophysics Data System (ADS)

Weiss, C. J.

2009-12-01

A key component to testing geodynamic hypotheses resulting from the 3D mantle convection simulations is the ability to easily translate the predicted physiochemical state to the model space relevant for an independent geophysical observation, such as earth's seismic, geodetic or electromagnetic response. In this contribution a new parallel code for simulating low-frequency, global-scale electromagnetic induction phenomena is introduced that has the same Earth discretization as the popular CitcomS mantle convection code. Hence, projection of the CitcomS model into the model space of electrical conductivity is greatly simplified, and focuses solely on the node-to-node, physics-based relationship between these Earth parameters without the need for "upscaling", "downscaling", averaging or harmonizing with some other model basis such as spherical harmonics. Preliminary performance tests of the MANTIS code on shared and distributed memory parallel compute platforms shows favorable scaling (>70% efficiency) for up to 500 processors. As with CitcomS, an OpenDX visualization widget (VISMAN) is also provided for 3D rendering and interactive interrogation of model results. Details of the MANTIS code will be briefly discussed here, focusing on compatibility with CitcomS modeling, as will be preliminary results in which the electromagnetic response of a CitcomS model is evaluated. VISMAN rendering of electrical tomography-derived electrical conductivity model overlain by an a 1x1 deg crustal conductivity map. Grey scale represents the log_10 magnitude of conductivity [S/m]. Arrows are horiztonal components of a hypothetical magnetospheric source field used to electromagnetically excite the conductivity model.

Teaching Basic Science Environmentally.

ERIC Educational Resources Information Center

Busch, Phylliss

1987-01-01

Discusses how, where, and when to capture indoor and outdoor insects for study: Grasshoppers, Cockroaches, Houseflies, Snowfleas, Stone Flies, Scorpian Flies, Crane Flies, Gypsy Moths, Tent Caterpillars, Bagworms, Praying Mantis, Oak Leaf Skeletonizers, Mourning Cloak Butterflies, Ladybird Beetles, Maple Leaf Cutters, Woolybears. Emphasizes…

Great Facts for September.

ERIC Educational Resources Information Center

Hansen, Karen L.

1992-01-01

Offers answers to questions on this issue's September calendar of events for elementary students. Items addressed include the Viking 2 spacecraft, children's poetry, Ellis Island, the space shuttle Discovery, space satellites and space junk, ice cream cones, Dr. Seuss, and the praying mantis. (SM)

Power consumption analysis of operating systems for wireless sensor networks.

PubMed

Lajara, Rafael; Pelegrí-Sebastiá, José; Perez Solano, Juan J

2010-01-01

In this paper four wireless sensor network operating systems are compared in terms of power consumption. The analysis takes into account the most common operating systems--TinyOS v1.0, TinyOS v2.0, Mantis and Contiki--running on Tmote Sky and MICAz devices. With the objective of ensuring a fair evaluation, a benchmark composed of four applications has been developed, covering the most typical tasks that a Wireless Sensor Network performs. The results show the instant and average current consumption of the devices during the execution of these applications. The experimental measurements provide a good insight into the power mode in which the device components are running at every moment, and they can be used to compare the performance of different operating systems executing the same tasks.

Synergistic and Antagonistic Effects of Thermal Shock, Air Exposure, and Fishing Capture on the Physiological Stress of Squilla mantis (Stomatopoda)

PubMed Central

Raicevich, Saša; Minute, Fabrizio; Finoia, Maria Grazia; Caranfa, Francesca; Di Muro, Paolo; Scapolan, Lucia; Beltramini, Mariano

2014-01-01

This study is aimed at assessing the effects of multiple stressors (thermal shock, fishing capture, and exposure to air) on the benthic stomatopod Squilla mantis, a burrowing crustacean quite widespread in the Mediterranean Sea. Laboratory analyses were carried out to explore the physiological impairment onset over time, based on emersion and thermal shocks, on farmed individuals. Parallel field-based studies were carried out to also investigate the role of fishing (i.e., otter trawling) in inducing physiological imbalance in different seasonal conditions. The dynamics of physiological recovery from physiological disruption were also studied. Physiological stress was assessed by analysing hemolymph metabolites (L-Lactate, D-glucose, ammonia, and H+), as well as glycogen concentration in muscle tissues. The experiments were carried out according to a factorial scheme considering the three factors (thermal shock, fishing capture, and exposure to air) at two fixed levels in order to explore possible synergistic, additive, or antagonistic effects among factors. Additive effects on physiological parameters were mainly detected when the three factors interacted together while synergistic effects were found as effect of the combination of two factors. This finding highlights that the physiological adaptive and maladaptive processes induced by the stressors result in a dynamic response that may encounter physiological limits when high stress levels are sustained. Thus, a further increase in the physiological parameters due to synergies cannot be reached. Moreover, when critical limits are encountered, mortality occurs and physiological parameters reflect the response of the last survivors. In the light of our mortality studies, thermal shock and exposure to air have the main effect on the survival of S. mantis only on trawled individuals, while lab-farmed individuals did not show any mortality during exposure to air until after 2 hours. PMID:25133593

[Origin of Lepidoptera fauna of the Southern Transural region].

PubMed

Utkin, N A

2000-01-01

The butterfly fauna of the Southern Transural region began mainly through the migration of insects from the Urals and Kazakhstan, since the end of the Cretaceous Period to the end of Paleogen, the Transural region was covered by an epiplatform sea. As this sea was retreating, the first regions of dry land appeared, which had boundaries with Kazakhstan and the Urals. They were the first to be populated by Lepidoptera. During the Pleocene and then after the Pleistocene cooling events, insects settled generally along the valley of the Tobol River and the Turgai depression, because these territories belong to intrazonal elements. At the present time, the greatest species diversity among insects in the southern Transural area is observed specifically in the Turgai depression and in areas directly adjacent to it. This territory is mainly occupied by populations unique to the Transural regions and belonging to the following species: Mantis religiosa (praying mantis), Saga pedo, Parnassius apollo (apollo), Neolycaena rhymnus, Hyponephele lupina (oriental meadow brown), Chazara persephone (dark rockbrown), Epicallia villica (cream-spot tiger), etc.

Disturbance of recruitment success of mantis shrimp in Tokyo Bay associated with effects of hypoxia on the early life history.

PubMed

Kodama, Keita; Tajima, Yoshihiro; Shimizu, Takamichi; Ohata, Satoshi; Shiraishi, Hiroaki; Horiguchi, Toshihiro

2014-08-30

We investigated effects of severe hypoxia (dissolved oxygen <1 ml l(-1)) on recruitment of mantis shrimp Oratosquilla oratoria in Tokyo Bay. Ten-year field surveys were conducted to examine quantitative relationships in annual mean densities of larvae and juveniles, and spatial distribution of juveniles and severe hypoxia. There was no significant correlation between annual mean densities of larvae and juveniles, suggesting that mortality during larval or juvenile stages varies among years, which might have regulated abundance of young-of-the-year juveniles. Juvenile density was low in the severely hypoxic area, implying that hypoxia could affect survivals and spatial distribution of juveniles. Meanwhile, there are yearly fluctuations in juvenile density in normoxic areas of both northern and southern part of the bay. This evidence suggests that abundance of post-settled juveniles might have been determined by not only effects of hypoxia, but also other factors influencing mortality during the early life stages. Copyright © 2014 Elsevier Ltd. All rights reserved.

Development of multi-ampered D{sup {minus}} source for fusion applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jacquot, C.; Belchenko, Y.; Bucalossi, J.

1996-07-01

Large current and high current density deuterium negative ion sources are investigated on the MANTIS test bed with the objective of producing several amperes of D{sup {minus}} beams, at an accelerated current density in the range 10{endash}20 mA/cm{sup 2}, for possible application in future neutral beam injectors, e.g. ITER. As a first step, the DRAGON source, which was built by Culham Laboratory was tested on the MANTIS test bed in order to test this large source using only {open_quote}{open_quote}pure volume{close_quote}{close_quote} production of negative ions. The accelerated negative ion current is found to be a strong function of the source operatingmore » pressure and the arc power, and a significant isotopic effect is observed. The maximum accelerated currents are 1.3 A of H{sup {minus}} (3.3 mA/cm{sup 2}) and 0.5 A (1.3 mA/cm{sup 2}) at 110 kW of arc power. Cesium injection from a non conventional dispenser together with an improved extraction system, have significantly improved the D-current. A maximum of 14 mA/cm{sup 2} of D{sup {minus}1} are accelerated at 30 kV, which corresponds potentially, to more than 5 A for a full aperture extraction with an arc power of 140 kW (2250 A of arc current). {copyright} {ital 1996 American Institute of Physics.}« less

Power Consumption Analysis of Operating Systems for Wireless Sensor Networks

PubMed Central

Lajara, Rafael; Pelegrí-Sebastiá, José; Perez Solano, Juan J.

2010-01-01

In this paper four wireless sensor network operating systems are compared in terms of power consumption. The analysis takes into account the most common operating systems—TinyOS v1.0, TinyOS v2.0, Mantis and Contiki—running on Tmote Sky and MICAz devices. With the objective of ensuring a fair evaluation, a benchmark composed of four applications has been developed, covering the most typical tasks that a Wireless Sensor Network performs. The results show the instant and average current consumption of the devices during the execution of these applications. The experimental measurements provide a good insight into the power mode in which the device components are running at every moment, and they can be used to compare the performance of different operating systems executing the same tasks. PMID:22219688

PRAYING MANTIS II: The Answer to Iranian Compliance

DTIC Science & Technology

2010-06-01

Andrew P. Layton , MBE MERCIAN (GBR Army), for his countless hours of editorial assistance and keen observations during the writing of this paper...Austin (2009, 2009): 1-33. Gordon, Michael R., Jeffery Gettleman, Isabel Kershner, Eric Schmitt, and Mona el- Naggar. "U.S. Officials Say Israel

Natural Models for Autonomous Control of Spatial Navigation, Sensing, and Guidance, Part 1

DTIC Science & Technology

2011-06-16

polarization sensitivity ten times more acute than previously documented in cephalopods (cuttlefish and octopus ) and crustaceans (mantis shrimps and crabs...responded to perceived looming stimuli in a number of ways, including swimming movements , skin colour and texture changes, which were recorded using

Levers and linkages: mechanical trade-offs in a power-amplified system.

PubMed

Anderson, Philip S L; Claverie, Thomas; Patek, S N

2014-07-01

Mechanical redundancy within a biomechanical system (e.g., many-to-one mapping) allows morphologically divergent organisms to maintain equivalent mechanical outputs. However, most organisms depend on the integration of more than one biomechanical system. Here, we test whether coupled mechanical systems follow a pattern of amplification (mechanical changes are congruent and evolve toward the same functional extreme) or independence (mechanisms evolve independently). We examined the correlated evolution and evolutionary pathways of the coupled four-bar linkage and lever systems in mantis shrimp (Stomatopoda) ultrafast raptorial appendages. We examined models of character evolution in the framework of two divergent groups of stomatopods-"smashers" (hammer-shaped appendages) and "spearers" (bladed appendages). Smashers tended to evolve toward force amplification, whereas spearers evolved toward displacement amplification. These findings show that coupled biomechanical systems can evolve synergistically, thereby resulting in functional amplification rather than mechanical redundancy. © 2014 The Author(s). Evolution © 2014 The Society for the Study of Evolution.

Humpback whale “super-groups” – A novel low-latitude feeding behaviour of Southern Hemisphere humpback whales (Megaptera novaeangliae) in the Benguela Upwelling System

PubMed Central

Seakamela, S. Mduduzi; Meÿer, Michael A.; Kirkman, Stephen P.; Barendse, Jaco; Cade, David E.; Hurwitz, David; Kennedy, Amy S.; Kotze, Pieter G. H.; McCue, Steven A.; Thornton, Meredith; Vargas-Fonseca, O. Alejandra; Wilke, Christopher G.

2017-01-01

Southern Hemisphere humpback whales (Megaptera novaeangliae) generally undertake annual migrations from polar summer feeding grounds to winter calving and nursery grounds in subtropical and tropical coastal waters. Evidence for such migrations arises from seasonality of historic whaling catches by latitude, Discovery and natural mark returns, and results of satellite tagging studies. Feeding is generally believed to be limited to the southern polar region, where Antarctic krill (Euphausia superba) has been identified as the primary prey item. Non-migrations and / or suspended migrations to the polar feeding grounds have previously been reported from a summer presence of whales in the Benguela System, where feeding on euphausiids (E. lucens), hyperiid amphipods (Themisto gaudichaudii), mantis shrimp (Pterygosquilla armata capensis) and clupeid fish has been described. Three recent research cruises (in October/November 2011, October/November 2014 and October/November 2015) identified large tightly-spaced groups (20 to 200 individuals) of feeding humpback whales aggregated over at least a one-month period across a 220 nautical mile region of the southern Benguela System. Feeding behaviour was identified by lunges, strong milling and repetitive and consecutive diving behaviours, associated bird and seal feeding, defecations and the pungent “fishy” smell of whale blows. Although no dedicated prey sampling could be carried out within the tightly spaced feeding aggregations, observations of E. lucens in the region of groups and the full stomach contents of mantis shrimp from both a co-occurring predatory fish species (Thyrsites atun) and one entangled humpback whale mortality suggest these may be the primary prey items of at least some of the feeding aggregations. Reasons for this recent novel behaviour pattern remain speculative, but may relate to increasing summer humpback whale abundance in the region. These novel, predictable, inter-annual, low latitude feeding events provide considerable potential for further investigation of Southern Hemisphere humpback feeding behaviours in these relatively accessible low-latitude waters. PMID:28249036

Humpback whale "super-groups" - A novel low-latitude feeding behaviour of Southern Hemisphere humpback whales (Megaptera novaeangliae) in the Benguela Upwelling System.

PubMed

Findlay, Ken P; Seakamela, S Mduduzi; Meÿer, Michael A; Kirkman, Stephen P; Barendse, Jaco; Cade, David E; Hurwitz, David; Kennedy, Amy S; Kotze, Pieter G H; McCue, Steven A; Thornton, Meredith; Vargas-Fonseca, O Alejandra; Wilke, Christopher G

2017-01-01

Southern Hemisphere humpback whales (Megaptera novaeangliae) generally undertake annual migrations from polar summer feeding grounds to winter calving and nursery grounds in subtropical and tropical coastal waters. Evidence for such migrations arises from seasonality of historic whaling catches by latitude, Discovery and natural mark returns, and results of satellite tagging studies. Feeding is generally believed to be limited to the southern polar region, where Antarctic krill (Euphausia superba) has been identified as the primary prey item. Non-migrations and / or suspended migrations to the polar feeding grounds have previously been reported from a summer presence of whales in the Benguela System, where feeding on euphausiids (E. lucens), hyperiid amphipods (Themisto gaudichaudii), mantis shrimp (Pterygosquilla armata capensis) and clupeid fish has been described. Three recent research cruises (in October/November 2011, October/November 2014 and October/November 2015) identified large tightly-spaced groups (20 to 200 individuals) of feeding humpback whales aggregated over at least a one-month period across a 220 nautical mile region of the southern Benguela System. Feeding behaviour was identified by lunges, strong milling and repetitive and consecutive diving behaviours, associated bird and seal feeding, defecations and the pungent "fishy" smell of whale blows. Although no dedicated prey sampling could be carried out within the tightly spaced feeding aggregations, observations of E. lucens in the region of groups and the full stomach contents of mantis shrimp from both a co-occurring predatory fish species (Thyrsites atun) and one entangled humpback whale mortality suggest these may be the primary prey items of at least some of the feeding aggregations. Reasons for this recent novel behaviour pattern remain speculative, but may relate to increasing summer humpback whale abundance in the region. These novel, predictable, inter-annual, low latitude feeding events provide considerable potential for further investigation of Southern Hemisphere humpback feeding behaviours in these relatively accessible low-latitude waters.

Anisotropic imaging performance in indirect x-ray imaging detectors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Badano, Aldo; Kyprianou, Iacovos S.; Sempau, Josep

We report on the variability in imaging system performance due to oblique x-ray incidence, and the associated transport of quanta (both x rays and optical photons) through the phosphor, in columnar indirect digital detectors. The analysis uses MANTIS, a combined x-ray, electron, and optical Monte Carlo transport code freely available. We describe the main features of the simulation method and provide some validation of the phosphor screen models considered in this work. We report x-ray and electron three-dimensional energy deposition distributions and point-response functions (PRFs), including optical spread in columnar phosphor screens of thickness 100 and 500 {mu}m, for 19,more » 39, 59, and 79 keV monoenergetic x-ray beams incident at 0 deg., 10 deg., and 15 deg. . In addition, we present pulse-height spectra for the same phosphor thickness, x-ray energies, and angles of incidence. Our results suggest that the PRF due to the phosphor blur is highly nonsymmetrical, and that the resolution properties of a columnar screen in a tomographic, or tomosynthetic imaging system varies significantly with the angle of x-ray incidence. Moreover, we find that the noise due to the variability in the number of light photons detected per primary x-ray interaction, summarized in the information or Swank factor, is somewhat independent of thickness and incidence angle of the x-ray beam. Our results also suggest that the anisotropy in the PRF is not less in screens with absorptive backings, while the noise introduced by variations in the gain and optical transport is larger. Predictions from MANTIS, after additional validation, can provide the needed understanding of the extent of such variations, and eventually, lead to the incorporation of the changes in imaging performance with incidence angle into the reconstruction algorithms for volumetric x-ray imaging systems.« less

A Functional Subnetwork Approach to Designing Synthetic Nervous Systems That Control Legged Robot Locomotion

PubMed Central

Szczecinski, Nicholas S.; Hunt, Alexander J.; Quinn, Roger D.

2017-01-01

A dynamical model of an animal’s nervous system, or synthetic nervous system (SNS), is a potentially transformational control method. Due to increasingly detailed data on the connectivity and dynamics of both mammalian and insect nervous systems, controlling a legged robot with an SNS is largely a problem of parameter tuning. Our approach to this problem is to design functional subnetworks that perform specific operations, and then assemble them into larger models of the nervous system. In this paper, we present networks that perform addition, subtraction, multiplication, division, differentiation, and integration of incoming signals. Parameters are set within each subnetwork to produce the desired output by utilizing the operating range of neural activity, R, the gain of the operation, k, and bounds based on biological values. The assembly of large networks from functional subnetworks underpins our recent results with MantisBot. PMID:28848419

RECOMMENDATIONS FOR SAMPLING OF TANK 18 IN F TANK FARM

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shine, G.

2009-12-14

Representative sampling is required for characterization of the residual floor material in Tank 18 prior to operational closure. Tank 18 is an 85-foot diameter, 34-foot high carbon steel tank with nominal operating volume of 1,300,000 gallons. It is a Type IV tank, and has been in service storing radioactive materials since 1959. Recent mechanical cleaning of the tank removed all mounds of material. Anticipating a low level of solids in the residual material, Huff and Thaxton [2009] developed a plan to sample the material during the final clean-up process while it would still be resident in sufficient quantities to supportmore » analytical determinations in four quadrants of the tank. Execution of the plan produced fewer solids than expected to support analytical determinations in all four quadrants. Huff and Thaxton [2009] then restructured the plan to characterize the residual floor material separately in the North and the South regions: two 'hemispheres.' This document provides sampling recommendations to complete the characterization of the residual material on the tank bottom following the guidance in Huff and Thaxton [2009] to split the tank floor into a North and a South hemisphere. The number of samples is determined from a modification of the formula previously published in Edwards [2001] and the sample characterization data for previous sampling of Tank 18 described by Oji [2009]. The uncertainty is quantified by an upper 95% confidence limit (UCL95%) on each analyte's mean concentration in Tank 18. The procedure computes the uncertainty in analyte concentration as a function of the number of samples, and the final number of samples is determined when the reduction in the uncertainty from an additional sample no longer has a practical impact on results. The characterization of the full suite of analytes in the North hemisphere is currently supported by a single Mantis rover sample obtained from a compact region near the center riser. A floor scrape sample was obtained from a compact region near the northeast riser and has been analyzed for a shortened list of key analytes. Since the unused portion of the floor scrape sample material is archived and available in sufficient quantity, additional analyses need to be performed to complete results for the full suite of constituents. The characterization of the full suite of analytes in the South hemisphere is currently supported by a single Mantis rover sample; there have been no floor scrape samples previously taken from the South hemisphere. The criterion to determine the number of additional samples was based on the practical reduction in the uncertainty when a new sample is added. This was achieved when five additional samples are obtained. In addition, two archived samples will be used if a contingency such as failing to demonstrate the comparability of the Mantis samples to the floor scrape samples occurs. To complete sampling of the Tank 18 residual floor material, three additional samples should be taken from the North hemisphere and four additional samples should be taken from the South hemisphere. One of the samples from each hemisphere will be archived in case of need. Two of the three additional samples from the North hemisphere and three of the four additional samples from the South hemisphere will be analyzed. Once the results are available, differences between the Mantis and three floor scrape samples (the sample previously obtained near NE riser plus the two additional samples that will be analyzed) results will be evaluated. If there are no statistically significant analyte concentration differences between the Mantis and floor scrape samples, those results will be combined and then UCL95%s will be calculated. If the analyte concentration differences between the Mantis and floor scrape samples are statistically significant, the UCL95%s will be calculated without the Mantis sample results. If further reduction in the upper confidence limits is needed and can be achieved by the addition of the archived samples, they will be analyzed and included in the statistical computations. Initially, the analyte concentrations in the residual material on the floor of Tank 18 will be determined separately in the North and the South hemispheres. However, if final sampling results show that differences between the North and South samples are consistent within sampling variation, then the final computations can be based on consolidating all sample results from the tank floor. Recommended locations may be subject to physical tank access and sampling constraints for the additional samples. The recommendations have been discussed in Section 4 and are based on partitioning the Tank 18 floor into an inner and an outer ring and six 60{sup o} sectors depicted in Figure 1. The location of the border between the inner and outer rings is based on dividing the residual material into two approximately equal volumes.« less

78 FR 2947 - Manti-La Sal National Forest, Utah; Maverick Point Forest Health Project

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-15

... class structure via use of timber harvesting and prescribed fire. Project activities also seek to.... Over the last 20 years drought conditions have increased; fire size, severity, and total acres burned... fire regimes have been significantly altered from their historical range. The risk of losing key...

An elusive Neotropical giant, Hondurantemna chespiritoi gen. n. & sp. n. (Antemninae, Mantidae): a new lineage of mantises exhibiting an ontogenetic change in cryptic strategy.

PubMed

Rodrigues, Henrique M; Rivera, Julio; Reid, Neil; Svenson, Gavin J

2017-01-01

We present the description of a new genus and new species of praying mantis, Hondurantemna chespiritoi gen. n. & sp. n. This species of cryptic mantis, collected in National parks in Mexico and Honduras, remained unknown despite its considerable body size. Based on a phylogenetic analysis with molecular data and traditional morphological analysis, we place this new genus within Antemninae, a monotypic Mantidae subfamily. We update the subfamily concept for Antemninae and provide a key to the two genera. We describe the external morphology of immatures and adults of the new species as well as the genital complexes of both sexes and the ootheca of Antemna rapax . The observed morphological changes between immature and adult females suggests that the selection for an alternate strategy for crypsis is a response to size increase of the abdomen during development. Immatures exploit a stick/branch habitat based on their morphological appearance while adult females appear as a leaf to disguise the profile of the body.

Reconstruction of two colonisation pathways of Mantis religiosa (Mantodea) in Germany using four mitochondrial markers.

PubMed

Linn, Catherine Anne; Griebeler, Eva Maria

2015-02-01

Past and recent climatic changes induced shifts in species ranges. Mantis religiosa has also expanded its range across Germany within the past decades. To determine the ancestry of German M. religiosa we sequenced four mitochondrial genes (COI, COII, Cyt b, ND4) of European M. religiosa populations. We found an east, central and west European lineage of M. religiosa. These distinct lineages are consistent with genetic isolation by distance during glacial periods, and the re-colonization of northern parts of Europe by species from different refugia. Within Germany, we found haplotypes clustering to the central and west European lineage suggesting that M. religiosa immigrated from two directions into Germany. Mismatch distributions, and negative Tajima's D and Fu's Fs values indicate a current range expansion of the central and west European lineage. We hypothesise that ongoing global warming which increases the availability of thermally favourable areas in Germany for M. religiosa adds to its current range expansion. In conclusion, M. religiosa colonized Germany via two directions: west German populations descended from French populations and east German populations from Czech populations.

Comparative Geometrical Investigations of Hand-Held Scanning Systems

NASA Astrophysics Data System (ADS)

Kersten, T. P.; Przybilla, H.-J.; Lindstaedt, M.; Tschirschwitz, F.; Misgaiski-Hass, M.

2016-06-01

An increasing number of hand-held scanning systems by different manufacturers are becoming available on the market. However, their geometrical performance is little-known to many users. Therefore the Laboratory for Photogrammetry & Laser Scanning of the HafenCity University Hamburg has carried out geometrical accuracy tests with the following systems in co-operation with the Bochum University of Applied Sciences (Laboratory for Photogrammetry) as well as the Humboldt University in Berlin (Institute for Computer Science): DOTProduct DPI-7, Artec Spider, Mantis Vision F5 SR, Kinect v1 + v2, Structure Sensor and Google's Project Tango. In the framework of these comparative investigations geometrically stable reference bodies were used. The appropriate reference data were acquired by measurement with two structured light projection systems (AICON smartSCAN and GOM ATOS I 2M). The comprehensive test results of the different test scenarios are presented and critically discussed in this contribution.

STATISTICAL ANALYSIS OF TANK 18F FLOOR SAMPLE RESULTS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Harris, S.

2010-09-02

Representative sampling has been completed for characterization of the residual material on the floor of Tank 18F as per the statistical sampling plan developed by Shine [1]. Samples from eight locations have been obtained from the tank floor and two of the samples were archived as a contingency. Six samples, referred to in this report as the current scrape samples, have been submitted to and analyzed by SRNL [2]. This report contains the statistical analysis of the floor sample analytical results to determine if further data are needed to reduce uncertainty. Included are comparisons with the prior Mantis samples resultsmore » [3] to determine if they can be pooled with the current scrape samples to estimate the upper 95% confidence limits (UCL{sub 95%}) for concentration. Statistical analysis revealed that the Mantis and current scrape sample results are not compatible. Therefore, the Mantis sample results were not used to support the quantification of analytes in the residual material. Significant spatial variability among the current sample results was not found. Constituent concentrations were similar between the North and South hemispheres as well as between the inner and outer regions of the tank floor. The current scrape sample results from all six samples fall within their 3-sigma limits. In view of the results from numerous statistical tests, the data were pooled from all six current scrape samples. As such, an adequate sample size was provided for quantification of the residual material on the floor of Tank 18F. The uncertainty is quantified in this report by an upper 95% confidence limit (UCL{sub 95%}) on each analyte concentration. The uncertainty in analyte concentration was calculated as a function of the number of samples, the average, and the standard deviation of the analytical results. The UCL{sub 95%} was based entirely on the six current scrape sample results (each averaged across three analytical determinations).« less

STATISTICAL ANALYSIS OF TANK 19F FLOOR SAMPLE RESULTS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Harris, S.

2010-09-02

Representative sampling has been completed for characterization of the residual material on the floor of Tank 19F as per the statistical sampling plan developed by Harris and Shine. Samples from eight locations have been obtained from the tank floor and two of the samples were archived as a contingency. Six samples, referred to in this report as the current scrape samples, have been submitted to and analyzed by SRNL. This report contains the statistical analysis of the floor sample analytical results to determine if further data are needed to reduce uncertainty. Included are comparisons with the prior Mantis samples resultsmore » to determine if they can be pooled with the current scrape samples to estimate the upper 95% confidence limits (UCL95%) for concentration. Statistical analysis revealed that the Mantis and current scrape sample results are not compatible. Therefore, the Mantis sample results were not used to support the quantification of analytes in the residual material. Significant spatial variability among the current scrape sample results was not found. Constituent concentrations were similar between the North and South hemispheres as well as between the inner and outer regions of the tank floor. The current scrape sample results from all six samples fall within their 3-sigma limits. In view of the results from numerous statistical tests, the data were pooled from all six current scrape samples. As such, an adequate sample size was provided for quantification of the residual material on the floor of Tank 19F. The uncertainty is quantified in this report by an UCL95% on each analyte concentration. The uncertainty in analyte concentration was calculated as a function of the number of samples, the average, and the standard deviation of the analytical results. The UCL95% was based entirely on the six current scrape sample results (each averaged across three analytical determinations).« less

A yellowbrush/grass community type from the Uinta Mountains and Utah Plateaus

Treesearch

Sherel Goodrich; Robert M. Thompson; Allen Huber

2001-01-01

Ecological inventory and vegetation monitoring in the Uinta Mountains and Utah Plateaus on the Ashley National Forest and Manti-LaSal National Forest of the past several years suggest a community type in which yellowbrush (Chrysothamnus viscidiflorus ssp. lanceolatus), and slender wheatgrass (Elymus trachycaulus) are indicator species. This community type is common at...

Ethnozoological study of animals based medicine used by traditional healers and indigenous inhabitants in the adjoining areas of Gibbon Wildlife Sanctuary, Assam, India.

PubMed

Borah, Manash Pratim; Prasad, Surya Bali

2017-06-30

India has an immense faunal, floral, as well as cultural diversity with many ethnic communities who are primarily dependent on the traditional medicinal system for their primary health care. Documentation and evaluation of this indigenous remedial knowledge may be helpful to establish new drugs for human health. The present study is intended to look into different zootherapeutic medicinal uses in the traditional health care system among the native inhabitants adjacent to the Gibbon Wildlife Sanctuary, Assam, India. Field survey was carried out from March 2015 to August 2015 by personal interviews through semi-structured questionnaires. In some cases where participants were uncomfortable with the questionnaires, informal interviews and open group discussions were conducted with a total of 62 indigenous respondents (43 male and 19 female) who provided the information regarding various medicinal uses of animals and their products (local name of animal, mode of preparation, application etc). The study recorded a total of 44 different species, 44 genera and 36 families of animals which are used for the treatment of 40 different ailments. Insects occupied the highest uses (30.9%), followed by mammals (23.8%), fishes (16.7%), reptiles (11.9%), amphibians (7.1%), annelids (4.8%) and gastropods (4.8%). Further, some zootherapeutic animals i.e. cockroach (Periplaneta americana), praying mantis (Mantis religiosa) and earthworms (Metaphire houletti, Pheretima posthum) are used for the treatment of asthma, otorrhoea and cancer respectively. The findings suggest that the traditional zootherapeutic remedial measures followed by the native people adjacent to Gibbon Wildlife Sanctuary plays an important role in their primary health care. The documentation of this indigenous knowledge on animal based medicines should be very helpful in the formulation of strategies for sustainable management and conservation of bio-resources as well as providing potential for the novel drugs discovery.

Design and Analysis of Bionic Cutting Blades Using Finite Element Method.

PubMed

Li, Mo; Yang, Yuwang; Guo, Li; Chen, Donghui; Sun, Hongliang; Tong, Jin

2015-01-01

Praying mantis is one of the most efficient predators in insect world, which has a pair of powerful tools, two sharp and strong forelegs. Its femur and tibia are both armed with a double row of strong spines along their posterior edges which can firmly grasp the prey, when the femur and tibia fold on each other in capturing. These spines are so sharp that they can easily and quickly cut into the prey. The geometrical characteristic of the praying mantis's foreleg, especially its tibia, has important reference value for the design of agricultural soil-cutting tools. Learning from the profile and arrangement of these spines, cutting blades with tooth profile were designed in this work. Two different sizes of tooth structure and arrangement were utilized in the design on the cutting edge. A conventional smooth-edge blade was used to compare with the bionic serrate-edge blades. To compare the working efficiency of conventional blade and bionic blades, 3D finite element simulation analysis and experimental measurement were operated in present work. Both the simulation and experimental results indicated that the bionic serrate-edge blades showed better performance in cutting efficiency.

Design and Analysis of Bionic Cutting Blades Using Finite Element Method

PubMed Central

Li, Mo; Yang, Yuwang; Guo, Li; Chen, Donghui; Sun, Hongliang; Tong, Jin

2015-01-01

Praying mantis is one of the most efficient predators in insect world, which has a pair of powerful tools, two sharp and strong forelegs. Its femur and tibia are both armed with a double row of strong spines along their posterior edges which can firmly grasp the prey, when the femur and tibia fold on each other in capturing. These spines are so sharp that they can easily and quickly cut into the prey. The geometrical characteristic of the praying mantis's foreleg, especially its tibia, has important reference value for the design of agricultural soil-cutting tools. Learning from the profile and arrangement of these spines, cutting blades with tooth profile were designed in this work. Two different sizes of tooth structure and arrangement were utilized in the design on the cutting edge. A conventional smooth-edge blade was used to compare with the bionic serrate-edge blades. To compare the working efficiency of conventional blade and bionic blades, 3D finite element simulation analysis and experimental measurement were operated in present work. Both the simulation and experimental results indicated that the bionic serrate-edge blades showed better performance in cutting efficiency. PMID:27019583

Negative ion production in large volume source with small deposition of cesium

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jacquot, C.; Pamela, J.; Riz, D.

1996-03-01

Experimental data on the enhancement of D{sup {minus}} (H{sup {minus}}) negative ion production due to cesium injection into a large volume multiampere negative ion source (MANTIS) are described. The directed deposition of small cesium amounts (5{endash}100 mg) from a compact, movable oven, placed into the central part of a MANTIS gas-discharge box was used. A calorimetrically measured D{sup {minus}} beam with an intensity up to 1.6 A and an extracted current density up to 4.2 mA/cm{sup 2} (beam energy 25 kV) was obtained. Exactly 30 mg of cesium provides at least one month of source operation (1000 pulses with amore » discharge pulse duration of 4 s). The effect of cesium on NI enhancement was immediately displayed after the distributed Cs deposition, but it needed some {open_quote}{open_quote}conditioning{close_quote}{close_quote} of cesium by tens of discharge pulses (or by several hours {open_quote}{open_quote}pause{close_quote}{close_quote}) in the case of a localized Cs deposition. No degradation of extraction-acceleration voltage holding on within the tested range of cesium injection was observed. {copyright} {ital 1996 American Institute of Physics.}« less

Development of the Long Pulse Negative Ion Source for ITER

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hemsworth, R.S.; Svensson, L.; Esch, H.P.L. de

2005-04-06

A model of the ion source designed for the neutral beam injectors of the International Thermonuclear Experimental Reactor (ITER), the KAMABOKO III ion source, is being tested on the MANTIS test stand at the DRFC Cadarache in collaboration with JAERI, Japan, who designed and supplied the ion source. The ion source is attached to a 3 grid 30 keV accelerator (also supplied by JAERI) and the accelerated negative ion current is determined from the energy deposited on a calorimeter located 1.6 m from the source.During experiments on MANTIS three adverse effects of long pulse operation were found: The negative ionmore » current to the calorimeter is {approx_equal}50% of that obtained from short pulse operation Increasing the plasma grid (PG) temperature results in {<=}40% enhancement in negative ion yield, substantially below that reported for short pulse operation, {>=}100%. The caesium 'consumption' is up to 1500 times that expected.Results presented here indicate that each of these is, at least partially, explained by thermal effects. Additionally presented are the results of a detailed characterisation of the source, which enable the most efficient mode of operation to be identified.« less

Three-dimensional effects for radio frequency antenna modeling

DOE Office of Scientific and Technical Information (OSTI.GOV)

Carter, M.D.; Batchelor, D.B.; Stallings, D.C.

1994-10-15

Electromagnetic field calculations for radio frequency (rf) antennas in two dimensions (2-D) neglect finite antenna length effects as well as the feeders leading to the main current strap. The 2-D calculations predict that the return currents in the sidewalls of the antenna structure depend strongly on the plasma parameters, but this prediction is suspect because of experimental evidence. To study the validity of the 2-D approximation, the Multiple Antenna Implementation System (MAntIS) has been used to perform three-dimensional (3-D) modeling of the power spectrum, plasma loading, and inductance for a relevant loop antenna design. Effects on antenna performance caused bymore » feeders to the main current strap and conducting sidewalls are considered. The modeling shows that the feeders affect the launched power spectrum in an indirect way by forcing the driven rf current to return in the antenna structure rather than the plasma, as in the 2-D model. It has also been found that poloidal dependencies in the plasma impedance matrix can reduce the loading predicted from that predicted in the 2-D model. For some plasma parameters, the combined 3-D effects can lead to a reduction in the predicted loading by as much as a factor of 2 from that given by the 2-D model, even with end-effect corrections for the 2-D model.« less

Three-dimensional effects for radio frequency antenna modeling

DOE Office of Scientific and Technical Information (OSTI.GOV)

Carter, M.D.; Batchelor, D.B.; Stallings, D.C.

1993-12-31

Electromagnetic field calculations for radio frequency (rf) antennas in two dimensions (2-D) neglect finite antenna length effects as well as the feeders leading to the main current strap. The 2-D calculations predict that the return currents in the sidewalls of the antenna structure depend strongly on the plasma parameters, but this prediction is suspect because of experimental evidence. To study the validity of the 2-D approximation, the Multiple Antenna Implementation System (MAntIS) has been used to perform three-dimensional (3-D) modeling of the power spectrum, plasma loading, and inductance for a relevant loop antenna design. Effects on antenna performance caused bymore » feeders to the main current strap and conducting sidewalls are considered. The modeling shows that the feeders affect the launched power spectrum in an indirect way by forcing the driven rf current to return in the antenna structure rather than the plasma, as in the 2-D model. It has also been found that poloidal dependencies in the plasma impedance matrix can reduce the loading predicted from that predicted in the 2-D model. For some plasma parameters, the combined 3-D effects can lead to a reduction in the predicted loading by as much as a factor of 2 from that given by the 2-D model, even with end-effect corrections for the 2-D model.« less

Long pulse operation of the Kamaboko negative ion source on the MANTIS test bed

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tramham, R.; Jacquot, C.; Riz, D.

1998-08-20

Advanced Tokamak concepts and steady state plasma scenarios require external plasma heating and current drive for extended time periods. This poses several problems for the neutral beam injection systems that are currently in use. The power loading of the ion source and accelerator are especially problematic. The Kamaboko negative ion source, a small scale model of the ITER arc source, is being prepared for extended operation of deuterium beams for up to 1000 seconds. The operating conditions of the plasma grid prove to be important for reducing electron power loading of the accelerator. Operation of deuterium beams for extended periodsmore » also poses radiation safety risks which must be addressed.« less

A review of the research on Canary Islands praying mantises (Mantodea).

PubMed

Wieland, Frank; Schütte, Kai; Goldberg, Julia

2014-05-21

For many years researchers studying the fauna of the Canary Islands have only sparsely treated the charismatic insect order of praying mantises (Mantodea). By studying the known literature it becomes obvious that there are several inconsistencies regarding mantodean taxonomy as well as the number of actual species and their distribution within the archipelago. In the present contribution, the literature treating the Canary Island Mantodea fauna is thoroughly reviewed, and the distribution of the ten known Mantodea species is presented with additional comments on the taxonomic problems. The taxonomy and distribution of the Canary Island Amelinae has been causing some confusion in the literature and is therefore discussed for a better understanding of the composition of this group. So far, seven species of Amelinae (two species of Ameles Burmeister and five species of Pseudoyersinia Kirby) are recognized for the Canary Islands. A careful survey of the taxonomic literature indicates that there is a substantial degree of variability in this group, which may have led to frequent misidentifications. This is reflected by the inconsistent literature data on the distribution of several Pseudoyersinia species within the archipelago. A crucial amendment and clarification is provided regarding the date of description (1838) of Ameles gracilis (Brullé) and Ameles limbata (Brullé) as it varies in the literature. Nomenclatural changes regarding the homonymy of Mantis limbata Brullé and Mantis limbata Hahn, previously proposed by Koçak & Kemal (2008), are rejected and discussed in detail. One of the Mantodea species, Empusa pennata (Thunberg), is frequently mentioned in the literature to be present on the Canary Islands, but after carefully reviewing the literature data it is evident that this species has never actually been found on any of the islands. The aim of this publication is to lay a basis for future research on the Mantodea fauna of the Canary Islands, their phylogenetic placement and history of dispersal. This is even more important as the archipelago is a European endemism hot spot for praying mantises and these basic parameters are crucial for implementing plans regarding conservation strategies on the islands.

Options for In Situ Capping of Palos Verdes Shelf Contaminated Sediments

DTIC Science & Technology

1999-03-01

coastal areas, as summarized by Rhoads and Carey (1996). In certain coastal areas the bioturbation effects of “ megafauna ” have received attention... Megafauna are exemplified by large skates and rays that excavate large pits during foraging and large crustaceans such as lobsters, crabs and mantis...disturbance, their pits are generally no deeper than 30 cm. Other potentially important megafauna included cuskeels and eelpouts, which are locally very

The role of edges in the selection of a jump target in Mantis religiosa.

PubMed

Hyden, Karin; Kral, Karl

2005-09-30

Before jumping to a landing object, praying mantids determine the distance, using information obtained from retinal image motion resulting from horizontal peering movements. The present study investigates the peering-jump behaviour of Mantis religiosa larvae with regard to jump targets differing in shape and size. The experimental animals were presented with square, triangular and round target objects with visual extensions of 20 degrees and 40 degrees. The cardboard objects, presented against a uniform white background, were solid black or shaded with a gradation from white to black. It was found that larger objects were preferred to smaller ones as jump targets, and that the square and triangle were preferred to the round disk. When two objects were presented, no preference was exhibited between square and triangular objects. However, when three objects were presented, the square was preferred. For targets with a visual angle of 40 degrees, the amplitude and velocity of the horizontal peering movements were greater for the round disk than for the square or triangle. This amplification of the peering movements suggests that weaker motion signals are generated in the case of curved edges. This may help to account for the preference for the square and triangle as jump targets.

Synaptonemal complex analysis of the X1X2Y trivalent in Mantis religiosa L. males: inferences on the origin and maintenance of the sex-determining mechanism.

PubMed

del Cerro, A L; Cuñado, N; Santos, J L

1998-01-01

Characterization of sex chromosomes in males of Mantis religiosa L. (2n = 24 + X1X2Y) was carried out by C-banding, silver staining and fluorescence in situ hybridization. They are meta- or submetacentric, their arms being designated as X1L, X1R, X2R, X2L, YL and YR. Meiotic behaviour of the sex trivalent was examined through the analysis of synaptonemal complexes (SCs), prometaphase I (metaphase I) and metaphase II nuclei. On the basis of the SC analysis, chromosomal length measurements at mitosis and prometaphase I and data from several orthopteran species, it is proposed that the breakpoints of the reciprocal translocation that originated this complex sex-determining mechanism were close to the centromeres of the X and the largest autosome, and that the asynapsed X1L and X2R regions observed in the sex trivalent at pachytene represent the original X chromosome. The X centromere being probably that of the X2 element because it lacks a partner in the SC pachytene trivalent. The relationship among synaptic pattern, chiasma localization and balanced segregation of the sex trivalent is also discussed.

Mitochondrial genomes of praying mantises (Dictyoptera, Mantodea): rearrangement, duplication, and reassignment of tRNA genes.

PubMed

Ye, Fei; Lan, Xu-E; Zhu, Wen-Bo; You, Ping

2016-05-09

Insect mitochondrial genomes (mitogenomes) contain a conserved set of 37 genes for an extensive diversity of lineages. Previously reported dictyopteran mitogenomes share this conserved mitochondrial gene arrangement, although surprisingly little is known about the mitogenome of Mantodea. We sequenced eight mantodean mitogenomes including the first representatives of two families: Hymenopodidae and Liturgusidae. Only two of these genomes retain the typical insect gene arrangement. In three Liturgusidae species, the trnM genes have translocated. Four species of mantis (Creobroter gemmata, Mantis religiosa, Statilia sp., and Theopompa sp.-HN) have multiple identical tandem duplication of trnR, and Statilia sp. additionally includes five extra duplicate trnW. These extra trnR and trnW in Statilia sp. are erratically arranged and form another novel gene order. Interestingly, the extra trnW is converted from trnR by the process of point mutation at anticodon, which is the first case of tRNA reassignment for an insect. Furthermore, no significant differences were observed amongst mantodean mitogenomes with variable copies of tRNA according to comparative analysis of codon usage. Combined with phylogenetic analysis, the characteristics of tRNA only possess limited phylogenetic information in this research. Nevertheless, these features of gene rearrangement, duplication, and reassignment provide valuable information toward understanding mitogenome evolution in insects.

Mitochondrial genomes of praying mantises (Dictyoptera, Mantodea): rearrangement, duplication, and reassignment of tRNA genes

PubMed Central

Ye, Fei; Lan, Xu-e; Zhu, Wen-bo; You, Ping

2016-01-01

Insect mitochondrial genomes (mitogenomes) contain a conserved set of 37 genes for an extensive diversity of lineages. Previously reported dictyopteran mitogenomes share this conserved mitochondrial gene arrangement, although surprisingly little is known about the mitogenome of Mantodea. We sequenced eight mantodean mitogenomes including the first representatives of two families: Hymenopodidae and Liturgusidae. Only two of these genomes retain the typical insect gene arrangement. In three Liturgusidae species, the trnM genes have translocated. Four species of mantis (Creobroter gemmata, Mantis religiosa, Statilia sp., and Theopompa sp.-HN) have multiple identical tandem duplication of trnR, and Statilia sp. additionally includes five extra duplicate trnW. These extra trnR and trnW in Statilia sp. are erratically arranged and form another novel gene order. Interestingly, the extra trnW is converted from trnR by the process of point mutation at anticodon, which is the first case of tRNA reassignment for an insect. Furthermore, no significant differences were observed amongst mantodean mitogenomes with variable copies of tRNA according to comparative analysis of codon usage. Combined with phylogenetic analysis, the characteristics of tRNA only possess limited phylogenetic information in this research. Nevertheless, these features of gene rearrangement, duplication, and reassignment provide valuable information toward understanding mitogenome evolution in insects. PMID:27157299

Flower-Visiting Butterflies Avoid Predatory Stimuli and Larger Resident Butterflies: Testing in a Butterfly Pavilion.

PubMed

Fukano, Yuya; Tanaka, Yosuke; Farkhary, Sayed Ibrahim; Kurachi, Takuma

2016-01-01

The flower-visiting behaviors of pollinator species are affected not only by flower traits but also by cues of predators and resident pollinators. There is extensive research into the effects of predator cues and resident pollinators on the flower-visiting behaviors of bee pollinators. However, there is relatively little research into their effects on butterfly pollinators probably because of the difficulty in observing a large number of butterfly pollination events. We conducted a dual choice experiment using artificial flowers under semi-natural conditions in the butterfly pavilion at Tama Zoological Park to examine the effects of the presence of a dead mantis and resident butterflies have on the flower-visiting behavior of several butterfly species. From 173 hours of recorded video, we observed 3235 visitations by 16 butterfly species. Statistical analysis showed that (1) butterflies avoided visiting flowers occupied by a dead mantis, (2) butterflies avoided resident butterflies that were larger than the visitor, and (3) butterflies showed greater avoidance of a predator when the predator was present together with the resident butterfly than when the predator was located on the opposite flower of the resident. Finally, we discuss the similarities and differences in behavioral responses of butterfly pollinators and bees.

Flower-Visiting Butterflies Avoid Predatory Stimuli and Larger Resident Butterflies: Testing in a Butterfly Pavilion

PubMed Central

Fukano, Yuya; Tanaka, Yosuke; Farkhary, Sayed Ibrahim; Kurachi, Takuma

2016-01-01

The flower-visiting behaviors of pollinator species are affected not only by flower traits but also by cues of predators and resident pollinators. There is extensive research into the effects of predator cues and resident pollinators on the flower-visiting behaviors of bee pollinators. However, there is relatively little research into their effects on butterfly pollinators probably because of the difficulty in observing a large number of butterfly pollination events. We conducted a dual choice experiment using artificial flowers under semi-natural conditions in the butterfly pavilion at Tama Zoological Park to examine the effects of the presence of a dead mantis and resident butterflies have on the flower-visiting behavior of several butterfly species. From 173 hours of recorded video, we observed 3235 visitations by 16 butterfly species. Statistical analysis showed that (1) butterflies avoided visiting flowers occupied by a dead mantis, (2) butterflies avoided resident butterflies that were larger than the visitor, and (3) butterflies showed greater avoidance of a predator when the predator was present together with the resident butterfly than when the predator was located on the opposite flower of the resident. Finally, we discuss the similarities and differences in behavioral responses of butterfly pollinators and bees. PMID:27846252

RECOMMENDATIONS FOR SAMPLING OF TANK 19 IN F TANK FARM

DOE Office of Scientific and Technical Information (OSTI.GOV)

Harris, S.; Shine, G.

2009-12-14

Representative sampling is required for characterization of the residual material in Tank 19 prior to operational closure. Tank 19 is a Type IV underground waste storage tank located in the F-Tank Farm. It is a cylindrical-shaped, carbon steel tank with a diameter of 85 feet, a height of 34.25 feet, and a working capacity of 1.3 million gallons. Tank 19 was placed in service in 1961 and initially received a small amount of low heat waste from Tank 17. It then served as an evaporator concentrate (saltcake) receiver from February 1962 to September 1976. Tank 19 also received the spentmore » zeolite ion exchange media from a cesium removal column that once operated in the Northeast riser of the tank to remove cesium from the evaporator overheads. Recent mechanical cleaning of the tank removed all mounds of material. Anticipating a low level of solids in the residual waste, Huff and Thaxton [2009] developed a plan to sample the waste during the final clean-up process while it would still be resident in sufficient quantities to support analytical determinations in four quadrants of the tank. Execution of the plan produced fewer solids than expected to support analytical determinations in all four quadrants. Huff and Thaxton [2009] then restructured the plan to characterize the residual separately in the North and the South regions: two 'hemispheres.' This document provides sampling recommendations to complete the characterization of the residual material on the tank bottom following the guidance in Huff and Thaxton [2009] to split the tank floor into a North and a South hemisphere. The number of samples is determined from a modification of the formula previously published in Edwards [2001] and the sample characterization data for previous sampling of Tank 19 described by Oji [2009]. The uncertainty is quantified by an upper 95% confidence limit (UCL95%) on each analyte's mean concentration in Tank 19. The procedure computes the uncertainty in analyte concentration as a function of the number of samples, and the final number of samples is determined when the reduction in the uncertainty from an additional sample no longer has a practical impact on results. The characterization of the full suite of analytes in the North and South hemispheres is currently supported by a single Mantis rover sample in each hemisphere. A floor scrape sample was obtained from a compact region near the center riser slightly in the South hemisphere and has been analyzed for a shortened list of key analytes. There is not enough additional material from the floor scrape sample material for completing the full suite of constituents. No floor scrape samples have been previously taken from the North hemisphere. The criterion to determine the number of additional samples was based on the practical reduction in the uncertainty when a new sample is added. This was achieved when five additional samples are obtained. In addition, two archived samples will be used if a contingency such as failing to demonstrate the comparability of the Mantis samples to the floor scrape samples occurs. To complete sampling of the Tank 19 residual floor material, four additional samples should be taken from the North hemisphere and four additional samples should be taken from the South hemisphere. One of the samples from each hemisphere will be archived in case of need. Three of the four additional samples from each hemisphere will be analyzed. Once the results are available, differences between the Mantis and three floor scrape sample results will be evaluated. If there are no statistically significant analyte concentration differences between the Mantis and floor scrape samples, those results will be combined and then UCL95%s will be calculated. If the analyte concentration differences between the Mantis and floor scrape samples are statistically significant, the UCL95%s will be calculated without the Mantis sample results. If further reduction in the upper confidence limits is needed and can be achieved by the addition of the archived samples, they will be analyzed and included in the statistical computations. Initially the analyte concentrations in the residual material on the floor of Tank 19 will be determined separately in the North and the South hemispheres. However, if final sampling results show that differences between the North and South samples are consistent within sampling variation, then the final computations can be based on consolidating all sample results from the tank floor. Recommended locations may be subject to physical tank access and sampling constraints for the additional samples. The recommendations have been discussed in Section 4 and are based on partitioning the Tank 19 floor into an inner and an outer ring and six 60{sup o} sectors depicted in Figure 1. The location of the border between the inner and outer rings is based on dividing the residual material into two approximately equal volumes.« less

Beginnings of range management: an anthology of the Sampson-Ellison photo plots (1913 to 2003) and a short history of the Great Basin Experiment Station

Treesearch

David A. Prevedel; E. Durant McArthur; Curtis M. Johnson

2005-01-01

High-elevation watersheds on the Wasatch Plateau in central Utah were severely overgrazed in the late 1800s, resulting in catastrophic flooding and mudflows through adjacent communities. Affected citizens petitioned the Federal government to establish a Forest Reserve (1902), and the Manti National Forest was established by the Transfer Act of 1905. The Great Basin...

Unleashing elastic energy: dynamics of energy release in rubber bands and impulsive biological systems

NASA Astrophysics Data System (ADS)

Ilton, Mark; Cox, Suzanne; Egelmeers, Thijs; Patek, S. N.; Crosby, Alfred J.

Impulsive biological systems - which include mantis shrimp, trap-jaw ants, and venus fly traps - can reach high speeds by using elastic elements to store and rapidly release energy. The material behavior and shape changes critical to achieving rapid energy release in these systems are largely unknown due to limitations of materials testing instruments operating at high speed and large displacement. In this work, we perform fundamental, proof-of-concept measurements on the tensile retraction of elastomers. Using high speed imaging, the kinematics of retraction are measured for elastomers with varying mechanical properties and geometry. Based on the kinematics, the rate of energy dissipation in the material is determined as a function of strain and strain-rate, along with a scaling relation which describes the dependence of maximum velocity on material properties. Understanding this scaling relation along with the material failure limits of the elastomer allows the prediction of material properties required for optimal performance. We demonstrate this concept experimentally by optimizing for maximum velocity in our synthetic model system, and achieve retraction velocities that exceed those in biological impulsive systems. This model system provides a foundation for future work connecting continuum performance to molecular architecture in impulsive systems.

Population genetic structure of the mantis shrimp Oratosquilla oratoria (Crustacea: Squillidae) in the Yellow Sea and East China Sea

NASA Astrophysics Data System (ADS)

Yang, Mei; Li, Xinzheng

2017-09-01

The mantis shrimp Oratosquilla oratoria is an ecologically and economically important species in the Western Pacific. In present study, the population genetic structure of Oratosquilla oratoria from the Yellow Sea and East China Sea was examined with mitochondrial DNA control region sequences. In total, 394 samples were collected from 18 locations and 102 haplotypes were obtained. For the Yellow Sea, the overall nucleotide diversity and haplotype diversity were 0.006 9 and 0.946 8, respectively; while across all the East China Sea locations, the overall nucleotide diversity and haplotype diversity were 0.027 94 and 0.979 0, respectively. The results of AMOVA and pairwise F ST (0.145 2, P <0.001) revealed moderate differentiation between the Yellow Sea and East China Sea populations of O. oratoria. However, neither the neighbor-joining tree nor haplotype network showed clades with geographic pattern, which indicated considerable gene flow was existed between the Yellow Sea and East China Sea, and supporting the high larval dispersal ability in this species. Mismatch distribution analysis and neutrality tests suggested that O. oratoria has undergone population expansion event, and the Pleistocene glacial cycles might have an impact on the historical demography of O. oratoria. The genetic information obtained in this study can provide useful information for sustainable improvements for capture fisheries management strategies.

The comparative hydrodynamics of rapid rotation by predatory appendages.

PubMed

McHenry, M J; Anderson, P S L; Van Wassenbergh, S; Matthews, D G; Summers, A P; Patek, S N

2016-11-01

Countless aquatic animals rotate appendages through the water, yet fluid forces are typically modeled with translational motion. To elucidate the hydrodynamics of rotation, we analyzed the raptorial appendages of mantis shrimp (Stomatopoda) using a combination of flume experiments, mathematical modeling and phylogenetic comparative analyses. We found that computationally efficient blade-element models offered an accurate first-order approximation of drag, when compared with a more elaborate computational fluid-dynamic model. Taking advantage of this efficiency, we compared the hydrodynamics of the raptorial appendage in different species, including a newly measured spearing species, Coronis scolopendra The ultrafast appendages of a smasher species (Odontodactylus scyllarus) were an order of magnitude smaller, yet experienced values of drag-induced torque similar to those of a spearing species (Lysiosquillina maculata). The dactyl, a stabbing segment that can be opened at the distal end of the appendage, generated substantial additional drag in the smasher, but not in the spearer, which uses the segment to capture evasive prey. Phylogenetic comparative analyses revealed that larger mantis shrimp species strike more slowly, regardless of whether they smash or spear their prey. In summary, drag was minimally affected by shape, whereas size, speed and dactyl orientation dominated and differentiated the hydrodynamic forces across species and sizes. This study demonstrates the utility of simple mathematical modeling for comparative analyses and illustrates the multi-faceted consequences of drag during the evolutionary diversification of rotating appendages. © 2016. Published by The Company of Biologists Ltd.

Low Mate Encounter Rate Increases Male Risk Taking in a Sexually Cannibalistic Praying Mantis

PubMed Central

Brown, William D.; Muntz, Gregory A.; Ladowski, Alexander J.

2012-01-01

Male praying mantises are forced into the ultimate trade-off of mating versus complete loss of future reproduction if they fall prey to a female. The balance of this trade-off will depend both on (1) the level of predatory risk imposed by females and (2) the frequency of mating opportunities for males. We report the results of a set of experiments that examine the effects of these two variables on male risk-taking behavior and the frequency of sexual cannibalism in the praying mantis Tenodera sinensis. We experimentally altered the rate at which males encountered females and measured male approach and courtship behavior under conditions of high and low risk of being attacked by females. We show that male risk taking depends on prior access to females. Males with restricted access to females showed greater risk-taking behavior. When males were given daily female encounters, they responded to greater female-imposed risk by slowing their rate of approach and remained a greater distance from a potential mate. In contrast, males without recent access to mates were greater risk-takers; they approached females more rapidly and to closer proximity, regardless of risk. In a second experiment, we altered male encounter rate with females and measured rates of sexual cannibalism when paired with hungry or well-fed females. Greater risk-taking behavior by males with low mate encounter rates resulted in high rates of sexual cannibalism when these males were paired with hungry females. PMID:22558146

Vitamin A and carotene contents of some wildlife foods

USGS Publications Warehouse

Nestler, R.B.; Derby, J.V.; DeWitt, J.B.

1949-01-01

In order to determine possible sources of vitamin A for quail, 37 species of insects and other invertebrates were analyzed for vitamin A and for carotene, and 26 species of seeds and fruits were assayed for carotene. The invertebrates showed no trace of vitamin A; but 8 herbivorous invertebrates and the praying mantis contained carotene. Most of the plants contained carotene--some of them a lot (dotted smartweed, some legumes, sumac, roses, bittersweet, etc.). The amount of carotene varied among plants of the same species and even among fruits on the same plant.

Food of the American smelt in Saginaw Bay, Lake Huron

USGS Publications Warehouse

Gordon, William G.

1961-01-01

In order to determine possible sources of vitamin A for quail, 37 species of insects and other invertebrates were analyzed for vitamin A and for carotene, and 26 species of seeds and fruits were assayed for carotene. The invertebrates showed no trace of vitamin A; but 8 herbivorous invertebrates and the praying mantis contained carotene. Most of the plants contained carotene--some of them a lot (dotted smartweed, some legumes, sumac, roses, bittersweet, etc.). The amount of carotene varied among plants of the same species and even among fruits on the same plant.

Twisting cracks in Bouligand structures.

PubMed

Suksangpanya, Nobphadon; Yaraghi, Nicholas A; Kisailus, David; Zavattieri, Pablo

2017-12-01

The Bouligand structure, which is found in many biological materials, is a hierarchical architecture that features uniaxial fiber layers assembled periodically into a helicoidal pattern. Many studies have highlighted the high damage-resistant performance of natural and biomimetic Bouligand structures. One particular species that utilizes the Bouligand structure to achieve outstanding mechanical performance is the smashing Mantis Shrimp, Odontodactylus Scyllarus (or stomatopod). The mantis shrimp generates high speed, high acceleration blows using its raptorial appendage to defeat highly armored preys. The load-bearing part of this appendage, the dactyl club, contains an interior region [16] that consists of a Bouligand structure. This region is capable of developing a significant amount of nested twisting microcracks without exhibiting catastrophic failure. The development and propagation of these microcracks are a source of energy dissipation and stress relaxation that ultimately contributes to the remarkable damage tolerance properties of the dactyl club. We develop a theoretical model to provide additional insights into the local stress intensity factors at the crack front of twisting cracks formed within the Bouligand structure. Our results reveal that changes in the local fracture mode at the crack front leads to a reduction of the local strain energy release rate, hence, increasing the necessary applied energy release rate to propagate the crack, which is quantified by the local toughening factor. Ancillary 3D simulations of the asymptotic crack front field were carried out using a J-integral to validate the theoretical values of the energy release rate and the local stress intensity factors. Copyright © 2017 Elsevier Ltd. All rights reserved.

Searching for Controlled Trials of Complementary and Alternative Medicine: A Comparison of 15 Databases

PubMed Central

Cogo, Elise; Sampson, Margaret; Ajiferuke, Isola; Manheimer, Eric; Campbell, Kaitryn; Daniel, Raymond; Moher, David

2011-01-01

This project aims to assess the utility of bibliographic databases beyond the three major ones (MEDLINE, EMBASE and Cochrane CENTRAL) for finding controlled trials of complementary and alternative medicine (CAM). Fifteen databases were searched to identify controlled clinical trials (CCTs) of CAM not also indexed in MEDLINE. Searches were conducted in May 2006 using the revised Cochrane highly sensitive search strategy (HSSS) and the PubMed CAM Subset. Yield of CAM trials per 100 records was determined, and databases were compared over a standardized period (2005). The Acudoc2 RCT, Acubriefs, Index to Chiropractic Literature (ICL) and Hom-Inform databases had the highest concentrations of non-MEDLINE records, with more than 100 non-MEDLINE records per 500. Other productive databases had ratios between 500 and 1500 records to 100 non-MEDLINE records—these were AMED, MANTIS, PsycINFO, CINAHL, Global Health and Alt HealthWatch. Five databases were found to be unproductive: AGRICOLA, CAIRSS, Datadiwan, Herb Research Foundation and IBIDS. Acudoc2 RCT yielded 100 CAM trials in the most recent 100 records screened. Acubriefs, AMED, Hom-Inform, MANTIS, PsycINFO and CINAHL had more than 25 CAM trials per 100 records screened. Global Health, ICL and Alt HealthWatch were below 25 in yield. There were 255 non-MEDLINE trials from eight databases in 2005, with only 10% indexed in more than one database. Yield varied greatly between databases; the most productive databases from both sampling methods were Acubriefs, Acudoc2 RCT, AMED and CINAHL. Low overlap between databases indicates comprehensive CAM literature searches will require multiple databases. PMID:19468052

Searching for controlled trials of complementary and alternative medicine: a comparison of 15 databases.

PubMed

Cogo, Elise; Sampson, Margaret; Ajiferuke, Isola; Manheimer, Eric; Campbell, Kaitryn; Daniel, Raymond; Moher, David

2011-01-01

This project aims to assess the utility of bibliographic databases beyond the three major ones (MEDLINE, EMBASE and Cochrane CENTRAL) for finding controlled trials of complementary and alternative medicine (CAM). Fifteen databases were searched to identify controlled clinical trials (CCTs) of CAM not also indexed in MEDLINE. Searches were conducted in May 2006 using the revised Cochrane highly sensitive search strategy (HSSS) and the PubMed CAM Subset. Yield of CAM trials per 100 records was determined, and databases were compared over a standardized period (2005). The Acudoc2 RCT, Acubriefs, Index to Chiropractic Literature (ICL) and Hom-Inform databases had the highest concentrations of non-MEDLINE records, with more than 100 non-MEDLINE records per 500. Other productive databases had ratios between 500 and 1500 records to 100 non-MEDLINE records-these were AMED, MANTIS, PsycINFO, CINAHL, Global Health and Alt HealthWatch. Five databases were found to be unproductive: AGRICOLA, CAIRSS, Datadiwan, Herb Research Foundation and IBIDS. Acudoc2 RCT yielded 100 CAM trials in the most recent 100 records screened. Acubriefs, AMED, Hom-Inform, MANTIS, PsycINFO and CINAHL had more than 25 CAM trials per 100 records screened. Global Health, ICL and Alt HealthWatch were below 25 in yield. There were 255 non-MEDLINE trials from eight databases in 2005, with only 10% indexed in more than one database. Yield varied greatly between databases; the most productive databases from both sampling methods were Acubriefs, Acudoc2 RCT, AMED and CINAHL. Low overlap between databases indicates comprehensive CAM literature searches will require multiple databases.

Common evolutionary trends underlie the four-bar linkage systems of sunfish and mantis shrimp.

PubMed

Hu, Yinan; Nelson-Maney, Nathan; Anderson, Philip S L

2017-05-01

Comparative biomechanics offers an opportunity to explore the evolution of disparate biological systems that share common underlying mechanics. Four-bar linkage modeling has been applied to various biological systems such as fish jaws and crustacean appendages to explore the relationship between biomechanics and evolutionary diversification. Mechanical sensitivity states that the functional output of a mechanical system will show differential sensitivity to changes in specific morphological components. We document similar patterns of mechanical sensitivity in two disparate four-bar systems from different phyla: the opercular four-bar system in centrarchid fishes and the raptorial appendage of stomatopods. We built dynamic linkage models of 19 centrarchid and 36 stomatopod species and used phylogenetic generalized least squares regression (PGLS) to compare evolutionary shifts in linkage morphology and mechanical outputs derived from the models. In both systems, the kinematics of the four-bar mechanism show significant evolutionary correlation with the output link, while travel distance of the output arm is correlated with the coupler link. This common evolutionary pattern seen in both fish and crustacean taxa is a potential consequence of the mechanical principles underlying four-bar systems. Our results illustrate the potential influence of physical principles on morphological evolution across biological systems with different structures, behaviors, and ecologies. © 2017 The Author(s). Evolution © 2017 The Society for the Study of Evolution.

Three-dimensional effects for radio frequency antenna modeling

DOE Office of Scientific and Technical Information (OSTI.GOV)

Carter, M.D.; Batchelor, D.B.; Stallings, D.C.

1993-09-01

Electromagnetic field calculations for radio frequency (rf) antennas in two dimensions (2-D) neglect finite antenna length effects as well as the feeders leading to the main current strap. Comparisons with experiments indicate that these 2-D calculations can overestimate the loading of the antenna and fail to give the correct reactive behavior. To study the validity of the 2-D approximation, the Multiple Antenna Implementation System (MAntIS) has been used to perform 3-D modeling of the power spectrum, plasma loading, and inductance for a relevant loop antenna design. Effects on antenna performance caused by feeders to the main current strap, conducting sidewalls,more » and finite phase velocity are considered. The plasma impedance matrix for the loading calculation is generated by use of the ORION-1D code. The 3-D model is benchmarked with the 2-D model in the 2-D limit. For finite-length antennas, inductance calculations are found to be in much more reasonable agreement with experiments for 3-D modeling than for the 2-D estimates. The modeling shows that the feeders affect the launched power spectrum in an indirect way by forcing the driven rf current to return in the antenna sidewalls rather than in the plasma as in the 2-D model. Thus, the feeders have much more influence than the plasma on the currents that return in the sidewall. It has also been found that poloidal dependencies in the plasma impedance matrix can reduce the loading from that predicted in the 2-D model. For some plasma parameters, the combined 3-D effects can lead to a reduction in the predicted loading by as much as a factor of 2 from that given by the 2-D model.« less

Uncovering three-dimensional gradients in fibrillar orientation in an impact-resistant biological armour.

PubMed

Zhang, Y; Paris, O; Terrill, N J; Gupta, H S

2016-05-23

The complex hierarchical structure in biological and synthetic fibrous nanocomposites entails considerable difficulties in the interpretation of the crystallographic texture from diffraction data. Here, we present a novel reconstruction method to obtain the 3D distribution of fibres in such systems. An analytical expression is derived for the diffraction intensity from fibres, explaining the azimuthal intensity distribution in terms of the angles of the three dimensional fibre orientation distributions. The telson of stomatopod (mantis shrimp) serves as an example of natural biological armour whose high impact resistance property is believed to arise from the hierarchical organization of alpha chitin nanofibrils into fibres and twisted plywood (Bouligand) structures at the sub-micron and micron scale. Synchrotron microfocus scanning X-ray diffraction data on stomatopod telson were used as a test case to map the 3D fibre orientation across the entire tissue section. The method is applicable to a range of biological and biomimetic structures with graded 3D fibre texture at the sub-micron and micron length scales.

CAPA-peptides of praying mantids (Mantodea).

PubMed

Koehler, Rene; Predel, Reinhard

2010-03-01

Dictyoptera which consist of cockroaches, termites, and praying mantids are among the oldest pterygote insects known. Whereas the localization and sequences of neuropeptides from a number of cockroaches are very well known, nearly nothing is known about the neuropeptides typical of praying mantids. In this study, the neuroanatomy of the median neuroendocrine system in the abdominal ventral nerve cord and the sequences of the CAPA-peptides which are expressed in the respective neuroendocrine cells were analyzed. Altogether, 40 species belonging to different families of Mantodea were included. In contrast to cockroaches, the mantids mostly express two CAPA-periviscerokinins (PVKs), only in Mantis religiosa a third PVK was identified. These PVKs are sequence-related to the PVKs of basal cockroaches (Polyphagidae). In a group of closely related Mantodea (Paramantinae), extended forms of PVK-2 were observed. As shown, these forms are possibly the result of substitutions in the N-terminal cleavage sites of the respective PVKs. No trace of a CAPA-pyrokinin was found in any of the praying mantids. (c) 2009 Elsevier Inc. All rights reserved.

Uncovering three-dimensional gradients in fibrillar orientation in an impact-resistant biological armour

NASA Astrophysics Data System (ADS)

Zhang, Y.; Paris, O.; Terrill, N. J.; Gupta, H. S.

2016-05-01

The complex hierarchical structure in biological and synthetic fibrous nanocomposites entails considerable difficulties in the interpretation of the crystallographic texture from diffraction data. Here, we present a novel reconstruction method to obtain the 3D distribution of fibres in such systems. An analytical expression is derived for the diffraction intensity from fibres, explaining the azimuthal intensity distribution in terms of the angles of the three dimensional fibre orientation distributions. The telson of stomatopod (mantis shrimp) serves as an example of natural biological armour whose high impact resistance property is believed to arise from the hierarchical organization of alpha chitin nanofibrils into fibres and twisted plywood (Bouligand) structures at the sub-micron and micron scale. Synchrotron microfocus scanning X-ray diffraction data on stomatopod telson were used as a test case to map the 3D fibre orientation across the entire tissue section. The method is applicable to a range of biological and biomimetic structures with graded 3D fibre texture at the sub-micron and micron length scales.

Uncovering three-dimensional gradients in fibrillar orientation in an impact-resistant biological armour

PubMed Central

Zhang, Y.; Paris, O.; Terrill, N. J.; Gupta, H. S.

2016-01-01

The complex hierarchical structure in biological and synthetic fibrous nanocomposites entails considerable difficulties in the interpretation of the crystallographic texture from diffraction data. Here, we present a novel reconstruction method to obtain the 3D distribution of fibres in such systems. An analytical expression is derived for the diffraction intensity from fibres, explaining the azimuthal intensity distribution in terms of the angles of the three dimensional fibre orientation distributions. The telson of stomatopod (mantis shrimp) serves as an example of natural biological armour whose high impact resistance property is believed to arise from the hierarchical organization of alpha chitin nanofibrils into fibres and twisted plywood (Bouligand) structures at the sub-micron and micron scale. Synchrotron microfocus scanning X-ray diffraction data on stomatopod telson were used as a test case to map the 3D fibre orientation across the entire tissue section. The method is applicable to a range of biological and biomimetic structures with graded 3D fibre texture at the sub-micron and micron length scales. PMID:27211574

Organochlorine-induced mortality and residues in long-billed curlews from Oregon

USGS Publications Warehouse

Blus, L.J.; Henny, Charles J.; Krynitsky, A.J.

1985-01-01

In order to determine possible sources of vitamin A for quail, 37 species of insects and other invertebrates were analyzed for vitamin A and for carotene, and 26 species of seeds and fruits were assayed for carotene. The invertebrates showed no trace of vitamin A; but 8 herbivorous invertebrates and the praying mantis contained carotene. Most of the plants contained carotene--some of them a lot (dotted smartweed, some legumes, sumac, roses, bittersweet, etc.). The amount of carotene varied among plants of the same species and even among fruits on the same plant.

Growth and reproduction of the Japanese mantis shrimp, Oratosquilla oratoria (De Haan 1844) in the coastal area of Tongyeong, Korea

NASA Astrophysics Data System (ADS)

Kim, SeongEun; Kim, HanJu; Bae, HoJin; Kim, Hyeong-Gi; Oh, Chul-Woong

2017-06-01

Growth and reproduction of the Japanese mantis shrimp, Oratosquilla oratoria, were investigated in the Tongyeong, Korea from July 2014 to August 2015. A total of 2,621 samples (1,380 females and 1,241 males) were collected during the study period. Females were observed more frequently than males. The mean body length (BL) was 128.5 ± 0.38 mm in females and 126.9 ± 0.42 mm in males. The mean body weight (BW) was 31.2 ± 0.28 g in females and 31.1 ± 0.32 g in males. There was a significant difference in the length-frequency distribution between females and males. The relationship between BL and BW was lnBW = 2.85 × lnBL - 10.43 for females and lnBW = 2.87 × lnBL -10.52 for males. The gonadosomatic index (GSI) varied on a monthly basis. The GSI reached a maximum in May and a minimum in November. The highest values of the GSI coincided with the spawning period of O. oratoria. Larger individuals of O. oratoria have their spawning season earlier than smaller ones. The size at sexual maturity of females was estimated as 96.5 mm. The Von Bertalanffy growth function parameters were BL∞ = 184.5 mm, K = 0.72 year-1, C = 0.36 and WP = 0.45 for females and BL∞ = 183.75 mm, K = 0.82 year-1, C = 0.38 and WP = 0.22 for males. The growth of males was slightly faster than females. The present study will help with the fisheries management of O. oratoria based on ecological parameters.

Habitat Preference of German Mantis religiosa Populations (Mantodea: Mantidae) and Implications for Conservation.

PubMed

Linn, Catherine Anne; Griebeler, Eva Maria

2016-08-01

In Germany, the thermophilic European mantid (Mantis religiosa L.) is endangered. Here, we study habitat requirements during its life, and discuss the applicability of the two conservation measures grazing and mowing to this insect species. At two study sites in south-western Germany, which were each subject to one of these measures, we recorded structural and climatic conditions within different microhabitats. We also conducted capture-mark-recapture studies for adult M. religiosa, and mapped adult roosting, oothecae deposition, egg hatching, and imaginal molting in microhabitats over two vegetation periods. In order to assess microhabitat preference of M. religiosa during its life, and identify climatic conditions driving preferences, we applied the Lille habitat preference index and conducted logistic regression analysis for life phases. Our results suggest that temperature is important for egg and nymph development. For egg deposition, females preferred solid substrates with high heat-storing capacities, as those attenuate the negative influence of cold weather periods on egg development. Being ambush predators, males and females preferred roosting sites with sufficient shelter and high prey abundance. Contrary to our expectation, the conservation measures reduced adult population sizes, and presumably reproduction rates. We thus suggest that mowing during the adult phase should reduce vegetation height to a moderate level to keep prey abundance high. Mowing with a clearing saw or grazing over a short period in small fenced areas should be preferred over prolonged grazing, as grazers collaterally stamp down the vegetation. Grazers indirectly reduce prey availability by deteriorating prevailing microclimatic conditions. © The Authors 2016. Published by Oxford University Press on behalf of Entomological Society of America. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

De novo transcriptome analysis and differentially expressed genes in the ovary and testis of the Japanese mantis shrimp Oratosquilla oratoria by RNA-Seq.

PubMed

Yan, Hongwei; Cui, Xin; Shen, Xufang; Wang, Lianshun; Jiang, Linan; Liu, Haiying; Liu, Ying; Liu, Qi; Jiang, Chen

2018-06-01

The mantis shrimp Oratosquilla oratoria is a widely distributed, commercially important crustacean species. Although its conservation and the development of successful artificial breeding technologies have recently received considerable attention, there are currently no available data regarding the molecular mechanisms in controlling reproduction. In this study, we performed transcriptome sequencing of the testis, ovary, female and male eyestalks and the androgenic gland of O. oratoria, and compared the expression pattern of transcripts from the testis and ovary libraries to identify genes involved in gonadal development. A total of 147,130,937 clean reads were retrieved after removing the adapters in reads and filtering out low-quality data. All the reads were assembled into 94,990 unigenes (23,133 in testis and ovary) with an average length of 783 base pairs (bp) and N50 of 1502 bp. A search of all-unigenes against COG, GO, KEGG, KOG, Pfam, Swiss-Prot and Nr databases resulted in a total of 19,404 annotated unigenes. Comparison of the sequences in the ovary and testis libraries revealed that 1188 unigenes were up-regulated in the ovary and 2732 were up-regulated in the testis. Twenty ovary-up-regulated and 21 testis-up-regulated unigenes were confirmed by quantitative real-time PCR. Additionally, 13,437 simple sequence repeats (SSRs) and 275,799 putative single nucleotide polymorphisms (SNPs) were identified. The important functional genes and pathways identified here provide a valuable dataset for understanding the molecular mechanisms controlling gonad development in O. oratoria, and the numerous (13,437 SSRs and 275,799 SNPs) molecular markers obtained here will provide fundamental basis for functional genomic and population genetic studies of O. oratoria. Copyright © 2018 Elsevier Inc. All rights reserved.

A new species of Dystacta Saussure, 1871 from Nyungwe National Park, Rwanda (Insecta, Mantodea, Dystactinae).

PubMed

Tedrow, Riley; Nathan, Kabanguka; Richard, Nasasira; Svenson, Gavin J

2014-01-01

A recent targeted entomological survey in the Republic of Rwanda has produced two conspecific male and female specimens of an undescribed species of praying mantis (Mantodea). The specimens were collected in Nyungwe National Park in May of 2013. The species is closest morphologically to Dystacta alticeps (Schaum, 1853). Therefore, a new species is described, Dystacta tigrifrutex sp. n., along with the first instar nymphs and ootheca. In addition, the previously monotypic genus Dystacta Saussure, 1871 is re-described to provide a broader definition of the genus group. Habitus images, measurement data, a key to species, natural history information, and locality data are provided.

A new species of Dystacta Saussure, 1871 from Nyungwe National Park, Rwanda (Insecta, Mantodea, Dystactinae)

PubMed Central

Tedrow, Riley; Nathan, Kabanguka; Richard, Nasasira; Svenson, Gavin J

2014-01-01

Abstract A recent targeted entomological survey in the Republic of Rwanda has produced two conspecific male and female specimens of an undescribed species of praying mantis (Mantodea). The specimens were collected in Nyungwe National Park in May of 2013. The species is closest morphologically to Dystacta alticeps (Schaum, 1853). Therefore, a new species is described, Dystacta tigrifrutex sp. n., along with the first instar nymphs and ootheca. In addition, the previously monotypic genus Dystacta Saussure, 1871 is re-described to provide a broader definition of the genus group. Habitus images, measurement data, a key to species, natural history information, and locality data are provided. PMID:24899847

Revision of the Neotropical bark mantis genus Liturgusa Saussure, 1869 (Insecta, Mantodea, Liturgusini)

PubMed Central

Svenson, Gavin J.

2014-01-01

Abstract The praying mantis genus Liturgusa Saussure, 1869 occurs only in Central and South America and represents the most diverse genus of Neotropical Liturgusini (Ehrmann 2002). The genus includes bark dwelling species, which live entirely on the trunks and branches of trees and run extremely fast. All species included within the genus Liturgusa are comprehensively revised with a distribution stretching from central Mexico, the island of Dominica to the southeastern regions of Brazil and southern Bolivia. All known species are redescribed to meet the standards of the new treatment of the genus (11 species). Three new genera are described including Fuga gen. n., Velox gen. n., and Corticomantis gen. n. for species previously included in Liturgusa as well as Hagiomantis. Liturgusa mesopoda Westwood, 1889 is moved to within the previously described genus Hagiomantis Audinet Serville, 1838. A total of 19 species are newly described within Liturgusa, Fuga, and Velox including L. algorei sp. n., L. bororum sp. n., L. cameroni sp. n., L. cura sp. n., L. dominica sp. n., L. fossetti sp. n., L. kirtlandi sp. n., L. krattorum sp. n., L. manausensis sp. n., L. maroni sp. n., L. milleri sp. n., L. neblina sp. n., L. purus sp. n., L. stiewei sp. n., L. tessae sp. n., L. trinidadensis sp. n., L. zoae sp. n., F. grimaldii sp. n., and V. wielandi sp. n. Four species names are synonymized: Liturgusa peruviana Giglio-Tos, 1914, syn. n. = Liturgusa nubeculosa Gerstaecker, 1889 and Hagiomantis parva Piza, 1966, syn. n., Liturgusa sinvalnetoi Piza, 1982, syn. n., and Liturgusa parva Giglio-Tos, 1914, syn. n. = Mantis annulipes Audinet Serville, 1838. Lectotypes are designated for the following two species: Liturgusa maya Saussure & Zehntner, 1894 and Fuga annulipes (Audinet Serville, 1838). A male neotype is designated for Liturgusa guyanensis La Greca, 1939. Males for eight species are described for the first time including Liturgusa cayennensis Saussure, 1869, Liturgusa lichenalis Gerstaecker, 1889, Liturgusa guyanensis La Greca, 1939, Liturgusa maya Saussure & Zehntner, 1894, Liturgusa nubeculosa Gerstaecker, 1889, Fuga annulipes (Audinet Serville, 1838), Corticomantis atricoxata (Beier, 1931), and Hagiomantis mesopoda (Westwood, 1889). The female of Fuga fluminensis (Piza, 1965) is described for the first time. Complete bibliographic histories are provided for previously described species. The spelling confusion surrounding Liturgusa/Liturgousa is resolved. Full habitus images for males and females are provided for nearly all species. Habitus and label images of type specimens are provided when possible. Diagnostic illustrations of the head and pronotum for males and females are provided for all species when possible. Illustrations of male genital structures are provided for all species for which males are known. Measurement data, including ranges and averages, are provided for males and females of all species. Combined male and female genus and species level dichotomous keys are provided with a Spanish translation. A complete table of all examined specimens lists label data, museum codes, repositories, and other specimen specific information. A KML file with all georeferenced locality records is downloadable from mantodearesearch.com for viewing in Google Earth. Natural history information is provided for species observed by the author. PMID:24715776

Revision of the Neotropical bark mantis genus Liturgusa Saussure, 1869 (Insecta, Mantodea, Liturgusini).

PubMed

Svenson, Gavin J

2014-01-01

The praying mantis genus Liturgusa Saussure, 1869 occurs only in Central and South America and represents the most diverse genus of Neotropical Liturgusini (Ehrmann 2002). The genus includes bark dwelling species, which live entirely on the trunks and branches of trees and run extremely fast. All species included within the genus Liturgusa are comprehensively revised with a distribution stretching from central Mexico, the island of Dominica to the southeastern regions of Brazil and southern Bolivia. All known species are redescribed to meet the standards of the new treatment of the genus (11 species). Three new genera are described including Fuga gen. n., Velox gen. n., and Corticomantis gen. n. for species previously included in Liturgusa as well as Hagiomantis. Liturgusa mesopoda Westwood, 1889 is moved to within the previously described genus Hagiomantis Audinet Serville, 1838. A total of 19 species are newly described within Liturgusa, Fuga, and Velox including L. algorei sp. n., L. bororum sp. n., L. cameroni sp. n., L. cura sp. n., L. dominica sp. n., L. fossetti sp. n., L. kirtlandi sp. n., L. krattorum sp. n., L. manausensis sp. n., L. maroni sp. n., L. milleri sp. n., L. neblina sp. n., L. purus sp. n., L. stiewei sp. n., L. tessae sp. n., L. trinidadensis sp. n., L. zoae sp. n., F. grimaldii sp. n., and V. wielandi sp. n. Four species names are synonymized: Liturgusa peruviana Giglio-Tos, 1914, syn. n. = Liturgusa nubeculosa Gerstaecker, 1889 and Hagiomantis parva Piza, 1966, syn. n., Liturgusa sinvalnetoi Piza, 1982, syn. n., and Liturgusa parva Giglio-Tos, 1914, syn. n. = Mantis annulipes Audinet Serville, 1838. Lectotypes are designated for the following two species: Liturgusa maya Saussure & Zehntner, 1894 and Fuga annulipes (Audinet Serville, 1838). A male neotype is designated for Liturgusa guyanensis La Greca, 1939. Males for eight species are described for the first time including Liturgusa cayennensis Saussure, 1869, Liturgusa lichenalis Gerstaecker, 1889, Liturgusa guyanensis La Greca, 1939, Liturgusa maya Saussure & Zehntner, 1894, Liturgusa nubeculosa Gerstaecker, 1889, Fuga annulipes (Audinet Serville, 1838), Corticomantis atricoxata (Beier, 1931), and Hagiomantis mesopoda (Westwood, 1889). The female of Fuga fluminensis (Piza, 1965) is described for the first time. Complete bibliographic histories are provided for previously described species. The spelling confusion surrounding Liturgusa/Liturgousa is resolved. Full habitus images for males and females are provided for nearly all species. Habitus and label images of type specimens are provided when possible. Diagnostic illustrations of the head and pronotum for males and females are provided for all species when possible. Illustrations of male genital structures are provided for all species for which males are known. Measurement data, including ranges and averages, are provided for males and females of all species. Combined male and female genus and species level dichotomous keys are provided with a Spanish translation. A complete table of all examined specimens lists label data, museum codes, repositories, and other specimen specific information. A KML file with all georeferenced locality records is downloadable from mantodearesearch.com for viewing in Google Earth. Natural history information is provided for species observed by the author.

NASA Tech Briefs, June 2011

NASA Technical Reports Server (NTRS)

2011-01-01

Topics covered include: Wind and Temperature Spectrometry of the Upper Atmosphere in Low-Earth Orbit; Health Monitor for Multitasking, Safety-Critical, Real-Time Software; Stereo Imaging Miniature Endoscope; Early Oscillation Detection Technique for Hybrid DC/DC Converters; Parallel Wavefront Analysis for a 4D Interferometer; Schottky Heterodyne Receivers With Full Waveguide Bandwidth; Carbon Nanofiber-Based, High-Frequency, High-Q, Miniaturized Mechanical Resonators; Ultracapacitor-Based Uninterrupted Power Supply System; Coaxial Cables for Martian Extreme Temperature Environments; Using Spare Logic Resources To Create Dynamic Test Points; Autonomous Coordination of Science Observations Using Multiple Spacecraft; Autonomous Phase Retrieval Calibration; EOS MLS Level 1B Data Processing Software, Version 3; Cassini Tour Atlas Automated Generation; Software Development Standard Processes (SDSP); Graphite Composite Panel Polishing Fixture; Material Gradients in Oxygen System Components Improve Safety; Ridge Waveguide Structures in Magnesium-Doped Lithium Niobate; Modifying Matrix Materials to Increase Wetting and Adhesion; Lightweight Magnetic Cooler With a Reversible Circulator; The Invasive Species Forecasting System; Method for Cleanly and Precisely Breaking Off a Rock Core Using a Radial Compressive Force; Praying Mantis Bending Core Breakoff and Retention Mechanism; Scoring Dawg Core Breakoff and Retention Mechanism; Rolling-Tooth Core Breakoff and Retention Mechanism; Vibration Isolation and Stabilization System for Spacecraft Exercise Treadmill Devices; Microgravity-Enhanced Stem Cell Selection; Diagnosis and Treatment of Neurological Disorders by Millimeter-Wave Stimulation; Passive Vaporizing Heat Sink; Remote Sensing and Quantization of Analog Sensors; Phase Retrieval for Radio Telescope and Antenna Control; Helium-Cooled Black Shroud for Subscale Cryogenic Testing; Receive Mode Analysis and Design of Microstrip Reflectarrays; and Chance-Constrained Guidance With Non-Convex Constraints.

Cuticular extracts of five common mantids (Mantodea:Mantidae) of the eastern United States.

PubMed

Jones, T H; Moran, M D; Hurd, L E

1997-04-01

We undertook a preliminary investigation of the cuticular extracts of five common mantid species in the eastern United States: Tenodera sinensis (Saussure), T. angustipennis (Saussure) and Mantis religiosa (Linnaeus) introduced from the Old World and Stagmomantis carolina (Johannson) and Bruneria borealis (Scudder), which are New World species. The major components of these mixtures were normal alkanes, predominately hentriacontane, or in the case of the parthenogenic species B. borealis, tritriacontane. Tricontanal was detected in the extracts of all five species, and smaller amounts of other aldehydes and n-tricontanol were detected in some species. Complex mixtures of methyl and dimethylalkanes also were present in these extracts. The composition of the cuticular hydrocarbons of these mantids may be an adaptation for reduction of evaporative water loss in these insects that inhabit open fields.

[PCR-based evaluation of sequence specificity of DNA fragmentation by ultrasound].

PubMed

Garafutdinov, R R; Galimova, A A; Sakhabutdinova, A R; Chemeris, A V

2016-01-01

Ultrasonic fragmentation, which is a simple and convenient method for the mechanical degradation of DNA, is widely used in modern genome studies as one of the sample preparation steps. It has been recently found that the DNA breaks occur more often in the regions containing 5'-CG-3' dinucleotides. We studied the influence of the 5'-CG-3' dinucleotides on the efficiency of the 28S rRNA gene amplification during PCR with sonicated DNA of Mantis religiosa. It was shown that the amplification rate depends on the template length and the number of 5'-CG-3' dinucleotides. Amplification of the DNA regions with a higher 5'-CG-3' density is less efficient because of their higher sensitivity to ultrasound. The amount of the amplified DNA templates is inversely proportional to the 5'-CG-3'number.

TU-H-CAMPUS-IeP1-01: Bias and Computational Efficiency of Variance Reduction Methods for the Monte Carlo Simulation of Imaging Detectors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sharma, D; Badano, A; Sempau, J

Purpose: Variance reduction techniques (VRTs) are employed in Monte Carlo simulations to obtain estimates with reduced statistical uncertainty for a given simulation time. In this work, we study the bias and efficiency of a VRT for estimating the response of imaging detectors. Methods: We implemented Directed Sampling (DS), preferentially directing a fraction of emitted optical photons directly towards the detector by altering the isotropic model. The weight of each optical photon is appropriately modified to maintain simulation estimates unbiased. We use a Monte Carlo tool called fastDETECT2 (part of the hybridMANTIS open-source package) for optical transport, modified for VRT. Themore » weight of each photon is calculated as the ratio of original probability (no VRT) and the new probability for a particular direction. For our analysis of bias and efficiency, we use pulse height spectra, point response functions, and Swank factors. We obtain results for a variety of cases including analog (no VRT, isotropic distribution), and DS with 0.2 and 0.8 optical photons directed towards the sensor plane. We used 10,000, 25-keV primaries. Results: The Swank factor for all cases in our simplified model converged fast (within the first 100 primaries) to a stable value of 0.9. The root mean square error per pixel for DS VRT for the point response function between analog and VRT cases was approximately 5e-4. Conclusion: Our preliminary results suggest that DS VRT does not affect the estimate of the mean for the Swank factor. Our findings indicate that it may be possible to design VRTs for imaging detector simulations to increase computational efficiency without introducing bias.« less

Crustacean-derived biomimetic components and nanostructured composites.

PubMed

Grunenfelder, Lessa Kay; Herrera, Steven; Kisailus, David

2014-08-27

Over millions of years, the crustacean exoskeleton has evolved into a rigid, tough, and complex cuticle that is used for structural support, mobility, protection of vital organs, and defense against predation. The crustacean cuticle is characterized by a hierarchically arranged chitin fiber scaffold, mineralized predominately by calcium carbonate and/or calcium phosphate. The structural organization of the mineral and organic within the cuticle occurs over multiple length scales, resulting in a strong and tough biological composite. Here, the ultrastructural details observed in three species of crustacean are reviewed: the American lobster (Homarus americanus), the edible crab (Cancer pagurus), and the peacock mantis shrimp (Odontodactylus scyllarus). The Review concludes with a discussion of recent advances in the development of biomimetics with controlled organic scaffolding, mineralization, and the construction of nanoscale composites, inspired by the organization and formation of the crustacean cuticle. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Sphodromantis viridis (Forskal, 1775): New for Portugal and new records of the rare and small mantids Apteromantis aptera (Fuente, 1894) and Perlamantis allibertii Guérin-Méneville, 1843 in the country (Mantodea: Mantidae and Amorphoscelidae)

PubMed Central

2014-01-01

Abstract Several new records are presented on some of the least known mantis species in the Iberian Peninsula. From data collected in Portugal, their analysis has proven to represent an important advancement in the knowledge of this group of insects for the country and the Western Mediterranean area. Twenty new citations provide a better understanding on the distribution of the crepuscular species Perlamantis allibertii, the IUCN red listed Apteromantis aptera and the first Portuguese records of Sphodromantis viridis, extending their western limits of occurrence in Europe. The data thus gathered emphasizes the need to invest in biodiversity assessment for increased knowledge on species distribution and phenology but also for monitoring over time, essential to better ascertaining ecosystem services, the effects of climate change and habitat conservation. PMID:24723784

Alkanes in shrimp from the Buccaneer Oil Field

DOE Office of Scientific and Technical Information (OSTI.GOV)

Middleditch, B.S.; Basile, B.; Chang, E.S.

1982-07-01

A total of 36 samples of shrimp were examined from the region of the Buccaneer oil field, eighteen of which were representatives of the commercial species Penaeus aztecus and the rest were various other species: Penaeus duorarum (pink shrimp), Trachypenaeus duorarum (sugar shrimp), Squilla empusa (mantis shrimp), and Sicyonia dorsalis (chevron shrimp). The alkanes and deuteriated alkanes were completely separated by GC, so a mass spectrometer was not required for their detection and quantitation. To confirm the identities of individual compounds, however, some samples were examined by combined gas chromatography-mass spectrometry. Results show that only thirteen of the forty shrimpmore » collected from the region of the Buccaneer oil field contained petroleum alkanes, and the majority of these were obtained from trawls immediately adjacent to the production platforms. It appears that shrimp caught in the region of the Buccaneer oil field are not appreciably tainted with hydrocarbons discharged from the production platforms. (JMT)« less

First inventory of the Crustacea (Decapoda, Stomatopoda) of Juan de Nova Island with ecological observations and comparison with nearby islands in the Mozambique channel (Europa, Glorieuses, Mayotte)

NASA Astrophysics Data System (ADS)

Poupin, J.

2016-04-01

Crustacea Decapoda and Stomatopoda are inventoried for the first time in Juan de Nova Island, Iles Eparses, Mozambique channel. In total, 112 species are reported: 69 crabs, 28 anomurans, 11 shrimps, 3 mantis shrimps and 1 lobster. A comparison is made with nearby islands in the Mozambique channel: Glorieuses Islands (157 species), Europa Island (178 species), and Mayotte Island (505 species). The lower species richness at Juan de Nova is explained by the small size of the island and by the difficulties to collect the crustaceans on the reef flat hardly accessible at low tide. The crustaceans are listed by main habitats from land to outer reef (2-20 m). The presence of the coconut crab (Birgus latro), an endangered species vulnerable to human predation, is confirmed.

Bioinspired Bouligand cellulose nanocrystal composites: a review of mechanical properties

NASA Astrophysics Data System (ADS)

Natarajan, Bharath; Gilman, Jeffrey W.

2017-12-01

The twisted plywood, or Bouligand, structure is the most commonly observed microstructural motif in natural materials that possess high mechanical strength and toughness, such as that found in bone and the mantis shrimp dactyl club. These materials are isotropically toughened by a low volume fraction of soft, energy-dissipating polymer and by the Bouligand structure itself, through shear wave filtering and crack twisting, deflection and arrest. Cellulose nanocrystals (CNCs) are excellent candidates for the bottom-up fabrication of these structures, as they naturally self-assemble into `chiral nematic' films when cast from solutions and possess outstanding mechanical properties. In this article, we present a review of the fabrication techniques and the corresponding mechanical properties of Bouligand biomimetic CNC nanocomposites, while drawing comparison to the performance standards set by tough natural composite materials. This article is part of a discussion meeting issue `New horizons for cellulose nanotechnology'.

A checklist of the praying mantises of Peru: new records, one new genus (Piscomantis gen. n.) and biogeographic remarks (Insecta, Mantodea).

PubMed

Rivera, Julio; Vergara-Cobián, Clorinda

2017-10-19

We present a preliminary checklist of the praying mantises (Insecta: Mantodea) of Peru. A total of 67 species are reported, nine of which constitute new records from that country. The following new nomenclatural procedures are introduced: Musoniella margharethae Battiston and Picciau, 2008 is transferred to Musonia as Musonia margharethae (Battiston and Picciau, 2008) (comb. n.), and Phyllovates brevicollis Orofino, Ippolito and Lombardo, 2006 is considered a new synonym (syn. n.) of Pseudovates peruviana (Rehn, 1911). A new genus, Piscomantis gen. n., is established to accommodate Galapagia peruana Beier, 1935, which is now referred to as Piscomantis peruana (Beier, 1935) (comb. n.). Ten species are removed from the Peruvian mantis fauna and two nomina nuda are proposed. An overview of the biogeography and ecology of Peruvian praying mantises is presented.

Dynamic polarization vision in mantis shrimps

PubMed Central

Daly, Ilse M.; How, Martin J.; Partridge, Julian C.; Temple, Shelby E.; Marshall, N. Justin; Cronin, Thomas W.; Roberts, Nicholas W.

2016-01-01

Gaze stabilization is an almost ubiquitous animal behaviour, one that is required to see the world clearly and without blur. Stomatopods, however, only fix their eyes on scenes or objects of interest occasionally. Almost uniquely among animals they explore their visual environment with a series pitch, yaw and torsional (roll) rotations of their eyes, where each eye may also move largely independently of the other. In this work, we demonstrate that the torsional rotations are used to actively enhance their ability to see the polarization of light. Both Gonodactylus smithii and Odontodactylus scyllarus rotate their eyes to align particular photoreceptors relative to the angle of polarization of a linearly polarized visual stimulus, thereby maximizing the polarization contrast between an object of interest and its background. This is the first documented example of any animal displaying dynamic polarization vision, in which the polarization information is actively maximized through rotational eye movements. PMID:27401817

The Chiropractic Care of Infants with Breastfeeding Difficulties.

PubMed

Alcantara, Joel; Alcantara, Joey D; Alcantara, Junjoe

2015-01-01

Chiropractors have long advocated on the benefits of breastfeeding and given the realized and potential role of chiropractors in the care of infants with breastfeeding difficulties, we performed this review of the literature on the subject to inform clinical practice. For this article, we searched Pubmed [1966-2013], Manual, Alternative and Natural Therapy Index System (MANTIS) [1964-2013] and Index to Chiropractic Literature [1984-2013] for the relevant literature. The search terms utilized "breastfeeding", "breast feeding", "breastfeeding difficulties", "breastfeeding difficulty", "TMJ dysfunction", "temporomandibular joint", "birth trauma" and "infants", in the appropriate Boolean combinations. We also examined non-peer-reviewed articles as revealed by Index to Chiropractic Literature and secondary analysis of references. Inclusion criteria for review included breastfeeding difficulties regardless of peer-review and written in the English language. A total of 24 articles met our inclusion criteria. These consisted of 8 case reports, 2 case series, and 3 cohort studies. We were also able to identify 6 manuscripts (5 case reports and a case series) that involved breastfeeding difficulties as a secondary complaint. Our findings reveal a theoretical and clinical framework based on the detection of spinal and extraspinal subluxations involving the cervico-cranio-mandibular complex and assessment of the infant while breastfeeding. Chiropractors care of infants with breastfeeding difficulties by addressing spinal and extraspinal subluxations involving the cervico-cranio-mandibular complex. Copyright © 2015 Elsevier Inc. All rights reserved.

Computer Simulation in Predicting Biochemical Processes and Energy Balance at WWTPs

NASA Astrophysics Data System (ADS)

Drewnowski, Jakub; Zaborowska, Ewa; Hernandez De Vega, Carmen

2018-02-01

Nowadays, the use of mathematical models and computer simulation allow analysis of many different technological solutions as well as testing various scenarios in a short time and at low financial budget in order to simulate the scenario under typical conditions for the real system and help to find the best solution in design or operation process. The aim of the study was to evaluate different concepts of biochemical processes and energy balance modelling using a simulation platform GPS-x and a comprehensive model Mantis2. The paper presents the example of calibration and validation processes in the biological reactor as well as scenarios showing an influence of operational parameters on the WWTP energy balance. The results of batch tests and full-scale campaign obtained in the former work were used to predict biochemical and operational parameters in a newly developed plant model. The model was extended with sludge treatment devices, including anaerobic digester. Primary sludge removal efficiency was found as a significant factor determining biogas production and further renewable energy production in cogeneration. Water and wastewater utilities, which run and control WWTP, are interested in optimizing the process in order to save environment, their budget and decrease the pollutant emissions to water and air. In this context, computer simulation can be the easiest and very useful tool to improve the efficiency without interfering in the actual process performance.

An epidemiological examination of the subluxation construct using Hill's criteria of causation.

PubMed

Mirtz, Timothy A; Morgan, Lon; Wyatt, Lawrence H; Greene, Leon

2009-12-02

Chiropractors claim to locate, analyze and diagnose a putative spinal lesion known as subluxation and apply the mode of spinal manipulation (adjustment) for the correction of this lesion. The purpose of this examination is to review the current evidence on the epidemiology of the subluxation construct and to evaluate the subluxation by applying epidemiologic criteria for it's significance as a causal factor. The databases of PubMed, Cinahl, and Mantis were searched for studies using the keywords subluxation, epidemiology, manipulation, dose-response, temporality, odds ratio, relative risk, biological plausibility, coherence, and analogy. The criteria for causation in epidemiology are strength (strength of association), consistency, specificity, temporality (temporal sequence), dose response, experimental evidence, biological plausibility, coherence, and analogy. Applied to the subluxation all of these criteria remain for the most part unfulfilled. There is a significant lack of evidence to fulfill the basic criteria of causation. This lack of crucial supportive epidemiologic evidence prohibits the accurate promulgation of the chiropractic subluxation.

An epidemiological examination of the subluxation construct using Hill's criteria of causation

PubMed Central

2009-01-01

Background Chiropractors claim to locate, analyze and diagnose a putative spinal lesion known as subluxation and apply the mode of spinal manipulation (adjustment) for the correction of this lesion. Aim The purpose of this examination is to review the current evidence on the epidemiology of the subluxation construct and to evaluate the subluxation by applying epidemiologic criteria for it's significance as a causal factor. Methods The databases of PubMed, Cinahl, and Mantis were searched for studies using the keywords subluxation, epidemiology, manipulation, dose-response, temporality, odds ratio, relative risk, biological plausibility, coherence, and analogy. Results The criteria for causation in epidemiology are strength (strength of association), consistency, specificity, temporality (temporal sequence), dose response, experimental evidence, biological plausibility, coherence, and analogy. Applied to the subluxation all of these criteria remain for the most part unfulfilled. Conclusion There is a significant lack of evidence to fulfill the basic criteria of causation. This lack of crucial supportive epidemiologic evidence prohibits the accurate promulgation of the chiropractic subluxation. PMID:19954544

The effects of kinesiotape on athletic-based performance outcomes in healthy, active individuals: a literature synthesis

PubMed Central

Drouin, Jillian L.; McAlpine, Caitlin T.; Primak, Kari A.; Kissel, Jaclyn

2013-01-01

Context: The effect of the application of kinesiotape to skin overlying musculature on measurable athletic-based performance outcomes in healthy individuals has not been well established. Objective: To systematically search and assess the quality of the literature on the effect of kinesiotape on athletic-based performance outcomes in healthy, active individuals. Methods: An electronic search strategy was conducted in MANTIS, Cochrane Library and EBSCO databases. Retrieved articles that met the eligibility criteria were rated for methodological quality by using an adaption of the critical appraisal criteria in Clinical Epidemiology by Sackett et al. Results: Ten articles met the inclusion criteria. Seven articles had positive results in at least one athletic-based performance measure compared to controls. Conclusion: Evidence is lacking to support the use of kinesiotape as a successful measure for improving athletic-based performance outcomes in healthy individuals. However, there is no evidence to show that kinesiotape has a negative effect on any of the performace measures. PMID:24302784

Landscape of Microsatellite Instability Across 39 Cancer Types.

PubMed

Bonneville, Russell; Krook, Melanie A; Kautto, Esko A; Miya, Jharna; Wing, Michele R; Chen, Hui-Zi; Reeser, Julie W; Yu, Lianbo; Roychowdhury, Sameek

2017-01-01

Microsatellite instability (MSI) is a pattern of hypermutation that occurs at genomic microsatellites and is caused by defects in the mismatch repair system. Mismatch repair deficiency that leads to MSI has been well described in several types of human cancer, most frequently in colorectal, endometrial, and gastric adenocarcinomas. MSI is known to be both predictive and prognostic, especially in colorectal cancer; however, current clinical guidelines only recommend MSI testing for colorectal and endometrial cancers. Therefore, less is known about the prevalence and extent of MSI among other types of cancer. Using our recently published MSI-calling software, MANTIS, we analyzed whole-exome data from 11,139 tumor-normal pairs from The Cancer Genome Atlas and Therapeutically Applicable Research to Generate Effective Treatments projects and external data sources across 39 cancer types. Within a subset of these cancer types, we assessed mutation burden, mutational signatures, and somatic variants associated with MSI. We identified MSI in 3.8% of all cancers assessed-present in 27 of tumor types-most notably adrenocortical carcinoma (ACC), cervical cancer (CESC), and mesothelioma, in which MSI has not yet been well described. In addition, MSI-high ACC and CESC tumors were observed to have a higher average mutational burden than microsatellite-stable ACC and CESC tumors. We provide evidence of as-yet-unappreciated MSI in several types of cancer. These findings support an expanded role for clinical MSI testing across multiple cancer types as patients with MSI-positive tumors are predicted to benefit from novel immunotherapies in clinical trials.

Population Structure, Movement Patterns, and Frequency of Multiple Matings in Tenodera sinensis (Mantodea: Mantidae).

PubMed

Christensen, Tyler; Brown, William D

2018-04-14

Models of the evolution of sexual cannibalism show that the frequency of male mating opportunities has significant impact on male choice and male risk aversion. In this study, we examined ecological components that should affect opportunities for multiple mating in wild populations of the Chinese mantid (Tenodera sinensis Saussure). While conducting mark-recapture studies of two field populations over the course of two seasons, along with Global Positioning System data on locations of individuals, we collected data on population densities, movement patterns, and individual ranges to estimate the overlap of adult males and female mantids. Our results show that local populations of mantids range from 89 to 161 individuals and occur at densities ranging from 10 to 39 mantids per 1,000 m2. Males move greater distances daily compared with females, giving males larger home range sizes. The ranges of male mantids overlapped with multiple females, thus offering the potential for multiple mating by males. We directly observed 11 encounters between male and female T. sinensis, including one multiple mating by an individual male. The overall mate encounter rate for males was 12.5%. We also provide additional observations of interspecific sexual attraction between T. sinensis and Mantis religiosa Linne (Mantodea: Mantidae). Mantids were most commonly found within the top 20% of two flowering plants, goldenrod (Solidago Linnaeus spp. (Asterales: Asteraceae)) and mugwort (Artemisia vulgaris Linnaeus (Asterales: Asteraceae)), which should place them in prime locations for capturing flying pollinators.

Sexual cannibalism increases male material investment in offspring: quantifying terminal reproductive effort in a praying mantis

PubMed Central

Brown, William D.; Barry, Katherine L.

2016-01-01

Models of the evolution of sexual cannibalism argue that males may offset the cost of cannibalism if components of the male body are directly allocated to the eggs that they fertilize. We tested this idea in the praying mantid Tenodera sinensis. Males and females were fed differently radiolabelled crickets and allowed to mate. Half of the pairs progressed to sexual cannibalism and we prevented cannibalism in the other half. We assess the relative allocation of both male-derived somatic materials and ejaculate materials into the eggs and soma of the female. Our results show that male somatic investment contributes to production of offspring. The eggs and reproductive tissues of cannibalistic females contained significantly more male-derived amino acids than those of non-cannibalistic females, and there was an increase in the number of eggs produced subsequent to sexual cannibalism. Sexual cannibalism thus increases male material investment in offspring. We also show that males provide substantial investment via the ejaculate, with males passing about 25% of their radiolabelled amino acids to females via the ejaculate even in the absence of cannibalism. PMID:27358366

The Afrotropical Miomantis caffra Saussure 1871 and Miomantis paykullii Stal 1871: first records of alien mantid species in Portugal and Europe, with an updated checklist of Mantodea in Portugal (Insecta: Mantodea)

PubMed Central

2014-01-01

Abstract The recent growing interest on the Mantodea fauna of southern Europe and Portugal in particular, has enabled the discovery of two geographically separated populations of hitherto unknown species in Europe. Analysis of specimens shows that they belong to two Afrotropical mantids: Miomantis caffra Saussure, 1871 and Miomantis paykullii Stal, 1871, thus raising the number of known species in Europe to 39 and in Portugal to 11. While these are remarkable findings, they also represent the first alien mantis species recorded from this continent. As yet, these species appear to be confined to artificial humanised gardened areas but call for more attention to the problem of biological invasions and the need for better bio-security measures for the conservation of natural ecosystems. In the absence of recent revisionary work on the Mantodea of Portugal and given the need to provide an accessible identification tool, both a checklist and a key to species are provided for all species in the country. PMID:25425938

The Afrotropical Miomantiscaffra Saussure 1871 and Miomantispaykullii Stal 1871: first records of alien mantid species in Portugal and Europe, with an updated checklist of Mantodea in Portugal (Insecta: Mantodea).

PubMed

Marabuto, Eduardo

2014-01-01

The recent growing interest on the Mantodea fauna of southern Europe and Portugal in particular, has enabled the discovery of two geographically separated populations of hitherto unknown species in Europe. Analysis of specimens shows that they belong to two Afrotropical mantids: Miomantiscaffra Saussure, 1871 and Miomantispaykullii Stal, 1871, thus raising the number of known species in Europe to 39 and in Portugal to 11. While these are remarkable findings, they also represent the first alien mantis species recorded from this continent. As yet, these species appear to be confined to artificial humanised gardened areas but call for more attention to the problem of biological invasions and the need for better bio-security measures for the conservation of natural ecosystems. In the absence of recent revisionary work on the Mantodea of Portugal and given the need to provide an accessible identification tool, both a checklist and a key to species are provided for all species in the country.

Filtering and polychromatic vision in mantis shrimps: themes in visible and ultraviolet vision.

PubMed

Cronin, Thomas W; Bok, Michael J; Marshall, N Justin; Caldwell, Roy L

2014-01-01

Stomatopod crustaceans have the most complex and diverse assortment of retinal photoreceptors of any animals, with 16 functional classes. The receptor classes are subdivided into sets responsible for ultraviolet vision, spatial vision, colour vision and polarization vision. Many of these receptor classes are spectrally tuned by filtering pigments located in photoreceptors or overlying optical elements. At visible wavelengths, carotenoproteins or similar substances are packed into vesicles used either as serial, intrarhabdomal filters or lateral filters. A single retina may contain a diversity of these filtering pigments paired with specific photoreceptors, and the pigments used vary between and within species both taxonomically and ecologically. Ultraviolet-filtering pigments in the crystalline cones serve to tune ultraviolet vision in these animals as well, and some ultraviolet receptors themselves act as birefringent filters to enable circular polarization vision. Stomatopods have reached an evolutionary extreme in their use of filter mechanisms to tune photoreception to habitat and behaviour, allowing them to extend the spectral range of their vision both deeper into the ultraviolet and further into the red.

Computation of the bluff-body sound generation by a self-consistent mean flow formulation

NASA Astrophysics Data System (ADS)

Fani, A.; Citro, V.; Giannetti, F.; Auteri, F.

2018-03-01

The sound generated by the flow around a circular cylinder is numerically investigated by using a finite-element method. In particular, we study the acoustic emissions generated by the flow past the bluff body at low Mach and Reynolds numbers. We perform a global stability analysis by using the compressible linearized Navier-Stokes equations. The resulting direct global mode provides detailed information related to the underlying hydrodynamic instability and data on the acoustic field generated. In order to recover the intensity of the produced sound, we apply the self-consistent model for non-linear saturation proposed by Mantič-Lugo, Arratia, and Gallaire ["Self-consistent mean flow description of the nonlinear saturation of the vortex shedding in the cylinder wake," Phys. Rev. Lett. 113, 084501 (2014)]. The application of this model allows us to compute the amplitude of the resulting linear mode and the effects of saturation on the mode structure and acoustic field. Our results show excellent agreement with those obtained by a full compressible simulation direct numerical simulation and those derived by the application of classical acoustic analogy formulations.

N2 production and fixation in deep-tier burrows of Squilla empusa in muddy sediments of Great Peconic Bay

NASA Astrophysics Data System (ADS)

Waugh, Stuart; Aller, Robert C.

2017-11-01

Global marine N budgets often show deficits due to dominance of benthic N2 production relative to pelagic N2 fixation. Recent studies have argued that benthic N2 fixation in shallow water environments has been underestimated. In particular, N2 fixation associated with animal burrows may be significant as indicated by high rates of N2 fixation reported in muddy sands populated by the ghost shrimp, Neotrypaea californiensis (Bertics et al., 2010). We investigated whether N2 fixation occurs at higher rates in the burrow-walls of the deep-burrowing ( 0.5-4 m) mantis shrimp, Squilla empusa, compared to ambient, estuarine muds and measured seasonal in-situ N2 concentrations in burrow-water relative to bottom-water. Acetylene reduction assays showed lower N2 fixation in burrow-walls than in un-populated sediments, likely due to inhibitory effects of O2 on ethylene production. Dissolved N2 was higher in burrow-water than proximate bottom-water at all seasons, demonstrating a consistent balance of net N2 production relative to fixation in deep-tier biogenic structures.

A History of The Journal of Chiropractic Education

PubMed Central

Green, Bart N.; Jacobs, Grace E.; Johnson, Claire D.; Phillips, Reed B.

2011-01-01

Purpose: The Journal of Chiropractic Education celebrates its 25th anniversary in the year 2011. The purpose of this article is to chronicle the history of the journal, which is unreported at this time. Methods: The entire collection of the journal was reviewed and information pertaining to important events and changes in the format, personnel, and processes of the journal were extracted. This information was used to create a chronology of the journal. The chronology was complemented with information obtained from people who were involved in the evolution of the journal and the Association of Chiropractic Colleges Educational Conferences. Results: Starting as a humble newsletter in 1987 and produced for a small cadre of readers primarily from the United States, the journal is now a full-sized and bound peer-reviewed international journal. Initially cataloged by the Index to Chiropractic Literature and MANTIS, the indexing expanded to interdisciplinary indexing systems such as CINAHL and ultimately PubMed. The journal has grown to serve the needs of chiropractic educators from around the world with representatives on the editorial board from 39 colleges and universities from 15 different countries. The journal has grown in tandem with the profession’s leading education and research conference and has been the primary repository for the scholarship of chiropractic education. Conclusion: The history of the journal represents a significant milestone in the development of the chiropractic profession, particularly the discipline of chiropractic education. The journal has had an interesting history and the future promises to bring more opportunities and challenges to the field of chiropractic education and to the journal. PMID:22069342

Economic evaluation of manual therapy for musculoskeletal diseases: a protocol for a systematic review and narrative synthesis of evidence.

PubMed

Kim, Chang-Gon; Mun, Su-Jeong; Kim, Ka-Na; Shin, Byung-Cheul; Kim, Nam-Kwen; Lee, Dong-Hyo; Lee, Jung-Han

2016-05-13

Manual therapy is the non-surgical conservative management of musculoskeletal disorders using the practitioner's hands on the patient's body for diagnosing and treating disease. The aim of this study is to systematically review trial-based economic evaluations of manual therapy relative to other interventions used for the management of musculoskeletal diseases. Randomised clinical trials (RCTs) on the economic evaluation of manual therapy for musculoskeletal diseases will be included in the review. The following databases will be searched from their inception: Medline, Embase, Cochrane Central Register of Controlled Trials (CENTRAL), Cumulative Index to Nursing and Allied Health Literature (CINAHL), Econlit, Mantis, Index to Chiropractic Literature, Science Citation Index, Social Science Citation Index, Allied and Complementary Medicine Database (AMED), Cochrane Database of Systematic Reviews (CDSR), National Health Service Database of Abstracts of Reviews of Effects (NHS DARE), National Health Service Health Technology Assessment Database (NHS HTA), National Health Service Economic Evaluation Database (NHS EED), CENTRAL, five Korean medical databases (Oriental Medicine Advanced Searching Integrated System (OASIS), Research Information Service System (RISS), DBPIA, Korean Traditional Knowledge Portal (KTKP) and KoreaMed) and three Chinese databases (China National Knowledge Infrastructure (CNKI), VIP and Wanfang). The evidence for the cost-effectiveness, cost-utility and cost-benefit of manual therapy for musculoskeletal diseases will be assessed as the primary outcome. Health-related quality of life and adverse effects will be assessed as secondary outcomes. We will critically appraise the included studies using the Cochrane risk of bias tool and the Drummond checklist. Results will be summarised using Slavin's qualitative best-evidence synthesis approach. The results of the study will be disseminated via a peer-reviewed journal and/or conference presentations. PROSPERO CRD42015026757. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Systematic Review of Integrative Health Care Research: Randomized Control Trials, Clinical Controlled Trials, and Meta-Analysis

PubMed Central

Khorsan, Raheleh; Coulter, Ian D.; Crawford, Cindy; Hsiao, An-Fu

2011-01-01

A systematic review was conducted to assess the level of evidence for integrative health care research. We searched PubMed, Allied and Complementary Medicine (AMED), BIOSIS Previews, EMBASE, the entire Cochrane Library, MANTIS, Social SciSearch, SciSearch Cited Ref Sci, PsychInfo, CINAHL, and NCCAM grantee publications listings, from database inception to May 2009, as well as searches of the “gray literature.” Available studies published in English language were included. Three independent reviewers rated each article and assessed the methodological quality of studies using the Scottish Intercollegiate Guidelines Network (SIGN 50). Our search yielded 11,891 total citations but 6 clinical studies, including 4 randomized, met our inclusion criteria. There are no available systematic reviews/meta-analyses published that met our inclusion criteria. The methodological quality of the included studies was assessed independently using quality checklists of the SIGN 50. Only a small number of RCTs and CCTs with a limited number of patients and lack of adequate control groups assessing integrative health care research are available. These studies provide limited evidence of effective integrative health care on some modalities. However, integrative health care regimen appears to be generally safe. PMID:20953383

Ocular media transmission of coral reef fish--can coral reef fish see ultraviolet light?

PubMed

Siebeck, U E; Marshall, N J

2001-01-15

Many coral reef fish are beautifully coloured and the reflectance spectra of their colour patterns may include UVa wavelengths (315-400 nm) that are largely invisible to the human eye (Losey, G. S., Cronin, T. W., Goldsmith, T. H., David, H., Marshall, N. J., & McFarland, W.N. (1999). The uv visual world of fishes: a review. Journal of Fish Biology, 54, 921-943; Marshall, N. J. & Oberwinkler, J. (1999). The colourful world of the mantis shrimp. Nature, 401, 873-874). Before the possible functional significance of UV patterns can be investigated, it is of course essential to establish whether coral reef fishes can see ultraviolet light. As a means of tackling this question, in this study the transmittance of the ocular media of 211 coral reef fish species was measured. It was found that the ocular media of 50.2% of the examined species strongly absorb light of wavelengths below 400 nm, which makes the perception of UV in these fish very unlikely. The remaining 49.8% of the species studied possess ocular media that do transmit UV light, making the perception of UV possible.

On the identity and taxonomic status of the enigmatic mantid Thespoides bolivari Chopard, 1916 (Mantodea: Mantidae, Angelinae).

PubMed

Rivera, Julio

2014-05-21

Chopard (1916) published a brief paper in which he cited and described a number of praying mantis species from the neotropics. The specimens he studied belonged to the prominent Spanish Entomologist Ignacio Bolívar y Urrutia (1850-1944), whose collection is now housed at the Museo Nacional de Ciencias Naturales in Madrid (MNCN), Spain (Izquierdo et al. 1997). In this publication Chopard described Thespoides bolivari Chopard, 1916 as a new genus and species, based on a single male obtained by French coleopterist René Oberthür in Cauca, Colombia. According to Chopard (1916) the specimen was remarkable for having, among other features, an abdomen that is markedly shorter than the rest of its body-certainly an unusual morphological trait among the Mantodea. Chopard assigned Thespoides to the Miopteryginae (Thespidae), but it was later reassigned (together with Angela Serville, 1839 as the "Angelae group") to the subfamily Schizocephalinae (Mantidae) by Giglio-Tos (1927). Current classifications consider the Angelinae to comprise a distinct subfamily of the Mantidae, with Thespoides and Angela as the only representatives of this subfamily with a Neotropical distribution (e.g. Ehrmann 2002).

Sexual cannibalism increases male material investment in offspring: quantifying terminal reproductive effort in a praying mantis.

PubMed

Brown, William D; Barry, Katherine L

2016-06-29

Models of the evolution of sexual cannibalism argue that males may offset the cost of cannibalism if components of the male body are directly allocated to the eggs that they fertilize. We tested this idea in the praying mantid Tenodera sinensis Males and females were fed differently radiolabelled crickets and allowed to mate. Half of the pairs progressed to sexual cannibalism and we prevented cannibalism in the other half. We assess the relative allocation of both male-derived somatic materials and ejaculate materials into the eggs and soma of the female. Our results show that male somatic investment contributes to production of offspring. The eggs and reproductive tissues of cannibalistic females contained significantly more male-derived amino acids than those of non-cannibalistic females, and there was an increase in the number of eggs produced subsequent to sexual cannibalism. Sexual cannibalism thus increases male material investment in offspring. We also show that males provide substantial investment via the ejaculate, with males passing about 25% of their radiolabelled amino acids to females via the ejaculate even in the absence of cannibalism. © 2016 The Author(s).

Anatomic and functional leg-length inequality: A review and recommendation for clinical decision-making. Part II, the functional or unloaded leg-length asymmetry

PubMed Central

Knutson, Gary A

2005-01-01

Background Part II of this review examines the functional "short leg" or unloaded leg length alignment asymmetry, including the relationship between an anatomic and functional leg-length inequality. Based on the reviewed evidence, an outline for clinical decision making regarding functional and anatomic leg-length inequality will be provided. Methods Online databases: Medline, CINAHL and Mantis. Plus library searches for the time frame of 1970–2005 were done using the term "leg-length inequality". Results and Discussion The evidence suggests that an unloaded leg-length asymmetry is a different phenomenon than an anatomic leg-length inequality, and may be due to suprapelvic muscle hypertonicity. Anatomic leg-length inequality and unloaded functional or leg-length alignment asymmetry may interact in a loaded (standing) posture, but not in an unloaded (prone/supine) posture. Conclusion The unloaded, functional leg-length alignment asymmetry is a likely phenomenon, although more research regarding reliability of the measurement procedure and validity relative to spinal dysfunction is needed. Functional leg-length alignment asymmetry should be eliminated before any necessary treatment of anatomic LLI. PMID:16080787

Anatomical landmark asymmetry assessment in the lumbar spine and pelvis: a review of reliability.

PubMed

Stovall, Bradley Alan; Kumar, Shrawan

2010-01-01

The purpose of this article is to review current research investigating the reliability of bony anatomical landmark positional asymmetry assessment in the lumbar spine and pelvis, to determine the agreement on findings between authors, and to explore future directions in the area to address the significant issues. The databases MEDLINE, CINAHL, AMED, MANTIS, Academic Search Complete, and Web of Knowledge were searched. A total of 23 articles were identified and reviewed, 10 of which met the inclusion criteria. For these 10 articles, the average interexaminer reliability for bony anatomical landmark positional asymmetry assessment was slightly above chance for all landmarks except medial malleolus, which had fair reliability. Interexaminer reliability on average was less than intraexaminer reliability (anterior superior iliac spine, k = 0.128/0.414; posterior superior iliac spine, k = 0.092/0.371). All interexaminer reliability averages were below values of clinical significance. From the current literature review, bony anatomical landmark positional asymmetry assessment in the lumbar spine and pelvis has not been demonstrated to be a reliable assessment method. However, there are unexplored factors that, after standardization, may improve reliability and further the understanding of musculoskeletal palpatory examination.

Feeding on toxic prey. The praying mantis (Mantodea) as predator of poisonous butterfly and moth (Lepidoptera) caterpillars.

PubMed

Mebs, Dietrich; Wunder, Cora; Pogoda, Werner; Toennes, Stefan W

2017-06-01

Caterpillars of the monarch butterfly, Danaus plexippus, feed on milkweed plants, Asclepias spp. (Apocynaceae), and sequester their toxic cardenolides aimed at deterring predators. Nevertheless, Chinese praying mantids, Tenodera sinensis, consume these caterpillars after removing the midgut ("gutting") including its plant content. In the present study, monarch caterpillars raised on A. curassavica, and those of the death's-head hawkmoth, Acherontia atropos, raised on Atropa belladonna containing atropine, were fed to mantids, Hierodula membranacea, which removed the gut of both species discarding about 59% of cardenolides and more than 90% of atropine, respectively. The ingestion of these compounds produced no apparent ill effects in the mantids and both were excreted with faeces. On the other hand, when mantids were fed with larvae of two moth species, Amata mogadorensis and Brahmaea certia, raised on non-poisonous host plants, the mantids showed the same gutting behaviour, thereby discarding indigestible plant material. As polar compounds, e.g. cardenolides and atropine, are not absorbed from the mantids midgut and do not pass the gut membrane, this enables the mantids to feed on toxic prey. Copyright © 2017 Elsevier Ltd. All rights reserved.

Some taxonomic and nomenclatural changes in American Mantodea (Insecta, Dictyoptera)--Part I.

PubMed

Agudelo, Antonio A; Rivera, Julio

2015-03-20

Multiple nomenclatural problems persist in mantodean taxonomy. This constitutes an important challenge for praying mantis systematics, its forthcoming development and future consolidation. In this first contribution, we attempt solving a number of issues involving mostly Neotropical praying mantis species described by Brazilian entomologists Paulo S. Terra, Cândido F. de Mello-Leitão, Salvador de Toledo Piza Junior and Lauro J. Jantsch. We provide evidence to justify the following nomenclatural changes. In Acanthopidae, Acontiothespis travassosi Jantsch, 1986 is a new synonym of Raptrix perspicua (F. 1787). Changes in Thespidae are: Emboicy Terra, 1982 is a new synonym of Chloromiopteryx Giglio-Tos, 1915, E. mirim Terra, 1982 is transferred to Chloromiopteryx as C. mirim (Terra, 1982) (new combination); Musoniola plurilobata Mello-Leitão, 1937 is transferred to Chloromiopteryx as C. plurilobata (Mello-Leitão, 1937) (new combination); Metathespis modesta Piza, 1968 is removed from synonymy with Chloromiopteryx thalassina (Burmeister, 1838) and considered valid as C. modesta (Piza, 1968) (new combination and status revalidated); Metathespis precaria Piza, 1968 is removed from synonymy with Chloromiopteryx thalassina (Burmeister, 1838) and considered a new synonym of Miobantia rustica (Fabricius, 1781); Eumiopteryx magna Jantsch, 1991 is transferred to Anamiopteryx as A. magna (Jantsch, 1991) (new combination). For Mantidae/Amelinae, Tithrone corseuli Jantsch, 1986 and T. clauseni Jantsch, 1995 are new synonyms of Litaneutria minor (Scudder, 1872); in Mantidae/Photininae Coptopteryx gigliotosi Piza, 1960 (non Werner, 1925), its replacement name Coptopteryx ermannoi Jantsch & Corseuil, 1988 and Paraphotina precaria Piza, 1966 (the latter currently placed within Coptopteryx) are all new synonyms of Coptopteryx argentina (Burmeister, 1838), whereas Brachypteromantis bonariensis Piza 1960 (currently placed among Coptopteryx) is a new synonym of Coptopteryx gayi (Blanchard, 1851); Tithrone major Piza, 1962 is transferred to Orthoderella as O. major (Piza, 1962) (new combination); Orthoderella brasiliensis Roy & Stiewe, 2011 is a new synonym of Orthoderella major (Piza, 1962); Tithrone catharinensis Piza, 1962 is a new synonym of Photina vitrea (Burmeister, 1838); Margaromantis Piza, 1982, Rehniella Lombardo, 1999, Colombiella Koçak & Kemal, 2008 and Lombardoa Özdikmen, 2008 are all new synonyms of Photiomantis Piza, 1968 (status revalidated); Metriomantis planicephala Rehn 1916 is transferred to Photiomantis as P. planicephala (Rehn, 1916) (new combination) and Photiomantis silvai Piza, 1968 is considered a new synonym of Photiomantis planicephala (Rehn, 1916);  Margaromantis nigrolineata Menezes & Bravo, 2015 is transferred to Photiomantis as P. nigrolineata (Menezes & Bravo, 2015) (new combination). In Mantidae/Vatinae, Uromantis amazonica Jantsch, 1985 and Uromantis paraensis Jantsch, 1985 (currently placed among Stagmomantis), are new synonyms of Chopardiella latipennis (Chopard, 1911), while Pseudovates hyalostigma Mello-Leitão, 1937 and Vates obscura Toledo Piza, 1983 are new synonyms of V. biplagiata Sjöstedt, 1930. Lectotypes are designated for Chloromiopteryx thalassina (Burmeister, 1838) and Orthoderella major (Piza, 1962). Finally, we provide supplementary information about the works of S. de T. Piza and L. J. Jantsch, and a necessary critical assessment of their taxonomic contributions to the Mantodea.

The Cadarache negative ion experiments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Massmann, P.; Bottereau, J.M.; Belchenko, Y.

1995-12-31

Up to energies of 140 keV neutral beam injection (NBI) based on positive ions has proven to be a reliable and flexible plasma heating method and has provided major contributions to most of the important experiments on virtually all large tokamaks around the world. As a candidate for additional heating and current drive on next step fusion machines (ITER ao) it is hoped that NBI can be equally successful. The ITER NBI parameters of 1 MeV, 50 MW D{degree} demand primary D{sup {minus}} beams with current densities of at least 15 mA/cm{sup 2}. Although considerable progress has been made inmore » the area of negative ion production and acceleration the high demands still require substantial and urgent development. Regarding negative ion production Cs seeded plasma sources lead the way. Adding a small amount of Cs to the discharge (Cs seeding) not only increases the negative ion yield by a factor 3--5 but also has the advantage that the discharge can be run at lower pressures. This is beneficial for the reduction of stripping losses in the accelerator. Multi-ampere negative ion production in a large plasma source is studied in the MANTIS experiment. Acceleration and neutralization at ITER relevant parameters is the objective of the 1 MV SINGAP experiment.« less

Chiropractic and CAM utilization: a descriptive review.

PubMed

Lawrence, Dana J; Meeker, William C

2007-01-22

To conduct a descriptive review of the scientific literature examining use rates of modalities and procedures used by CAM clinicians to manage chronic LBP and other conditions A literature of PubMed and MANTIS was performed using the key terms Chiropractic; Low Back Pain; Utilization Rate; Use Rate; Complementary and Alternative Medicine; and Health Services in various combinations. A total of 137 papers were selected, based upon including information about chiropractic utilization, CAM utilization and low back pain and other conditions. Information was extracted from each paper addressing use of chiropractic and CAM, and is summarized in tabular form. Thematic analysis of the paper topics indicated that there were 5 functional areas covered by the literature: back pain papers, general chiropractic papers, insurance-related papers, general CAM-related papers; and worker's compensation papers. Studies looking at chiropractic utilization demonstrate that the rates vary, but generally fall into a range from around 6% to 12% of the population, most of whom seek chiropractic care for low back pain and not for organic disease or visceral dysfunction. CAM is itself used by people suffering from a variety of conditions, though it is often used not as a primary intervention, but rather as an additional form of care. CAM and chiropractic often offer lower costs for comparable results compared to conventional medicine.

Anisotropic imaging performance in breast tomosynthesis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Badano, Aldo; Kyprianou, Iacovos S.; Jennings, Robert J.

We describe the anisotropy in imaging performance caused by oblique x-ray incidence in indirect detectors for breast tomosynthesis based on columnar scintillator screens. We use MANTIS, a freely available combined x-ray, electron, and optical Monte Carlo transport package which models the indirect detection processes in columnar screens, interaction by interaction. The code has been previously validated against published optical distributions. In this article, initial validation results are provided concerning the blur for particular designs of phosphor screens for which some details with respect to the columnar geometry are available from scanning electron microscopy. The polyenergetic x-ray spectrum utilized comes frommore » a database of experimental data for three different anode/filter/kVp combinations: Mo/Mo at 28 kVp, Rh/Rh at 28 kVp, and W/Al at 42 kVp. The x-ray spectra were then filtered with breast tissue (3, 4, and 6 cm thickness), compression paddle, and support base, according to the oblique paths determined by the incidence angle. The composition of the breast tissue was 50%/50% adipose/glandular tissue mass ratio. Results are reported on the pulse-height statistics of the light output and on spatial blur, expressed as the response of the detector to a pencil beam with a certain incidence angle. Results suggest that the response is nonsymmetrical and that the resolution properties of a tomosynthesis system vary significantly with the angle of x-ray incidence. In contrast, it is found that the noise due to the variability in the number of light photons detected per primary x-ray interaction changes only a few percent. The anisotropy in the response is not less in screens with absorptive backings while the noise introduced by variations in the depth-dependent light output and optical transport is larger. The results suggest that anisotropic imaging performance across the detector area can be incorporated into reconstruction algorithms for improving the image quality of breast tomosynthesis. This study also demonstrates that the assessment of image quality of breast tomosynthesis systems requires a more complete description of the detector response beyond local, center measurements of resolution and noise that assume some degree of symmetry in the detector performance.« less

Spinal curves and health: a systematic critical review of the epidemiological literature dealing with associations between sagittal spinal curves and health.

PubMed

Christensen, Sanne Toftgaard; Hartvigsen, Jan

2008-01-01

The purposes of this study were to (1) determine whether sagittal spinal curves are associated with health in epidemiological studies, (2) estimate the strength of such associations, and (3) consider whether these relations are likely to be causal. A systematic critical literature review of epidemiological (cross-sectional, case-control, cohort) studies published before 2008 including studies identified in the CINAHL, EMBASE, Mantis, and Medline databases was performed using a structured checklist and a quality assessment. Level of evidence analysis was performed as outlined by van Tulder et al (Spine. 2003;28:1290-9), and the strength of associations were determined using the procedure outlined by Hemingway and Marmot (BMJ. 1999;318:1460-7). Quality of the included articles were assessed by our own scoring system based on the STrengthening the Reporting of OBservational studies in Epidemiology checklist. Studies scoring maximum points (4/4 or 3/3) were considered to be of higher quality. Fifty-four original studies were included. We found no strong evidence for any association between sagittal spinal curves and any health outcomes including spinal pain. The included studies were generally of low methodological quality. There is moderate evidence for association between sagittal spinal curves and 4 health outcomes as follows: temporomandibular disorders (no odds ratios [ORs] provided), pelvic organ prolapse (OR, 3.18; 95% confidence interval [CI], 1.46-96.93), daily function (OR range, 1.8-3.7; 95% CI range, 1.1-6.3), and death (OR, 1.40; 95% CI, 1.08-1.91). These associations are however unlikely to be causal. Evidence from epidemiological studies does not support an association between sagittal spinal curves and health including spinal pain. Further research of better methodological quality may affect this conclusion, and causal effects cannot be determined in a systematic review.

Providers' perceptions of the implementation of a performance measurement system for substance abuse treatment: A process evaluation of the Service Quality Measures initiative.

PubMed

Myers, Bronwyn; Williams, Petal Petersen; Johnson, Kim; Govender, Rajen; Manderscheid, Ron; Koch, J Randy

2016-02-22

In South Africa, concerns exist about the quality of substance abuse treatment. We developed a performance measurement system, known as the Service Quality Measures (SQM) initiative, to monitor the quality of treatment and assess efforts to improve quality of care. In 2014, the SQM system was implemented at six treatment sites to evaluate how implementation protocols could be improved in preparation for wider roll-out. To describe providers' perceptions of the feasibility and acceptability of implementing the SQM system, including barriers to and facilitators of implementation. We conducted 15 in-depth interviews (IDIs) with treatment providers from six treatment sites (two sites in KwaZulu-Natal and four in the Western Cape). Providers were asked about their experiences in implementing the system, the perceived feasibility of the system, and barriers to implementation. All IDIs were audio-recorded and transcribed verbatim. A framework approach was used to analyse the data. Providers reported that the SQM system was feasible to implement and acceptable to patients and providers. Issues identified through the IDIs included a perceived lack of clarity about sequencing of key elements in the implementation of the SQM system, questions on integration of the system into clinical care pathways, difficulties in tracking patients through the system, and concerns about maximising patient participation in the process. Findings suggest that the SQM system is feasible to implement and acceptable to providers, but that some refinements to the implementation protocols are needed to maximise patient participation and the likelihood of sustained implementation.

Risk assessment for enterprise resource planning (ERP) system implementations: a fault tree analysis approach

NASA Astrophysics Data System (ADS)

Zeng, Yajun; Skibniewski, Miroslaw J.

2013-08-01

Enterprise resource planning (ERP) system implementations are often characterised with large capital outlay, long implementation duration, and high risk of failure. In order to avoid ERP implementation failure and realise the benefits of the system, sound risk management is the key. This paper proposes a probabilistic risk assessment approach for ERP system implementation projects based on fault tree analysis, which models the relationship between ERP system components and specific risk factors. Unlike traditional risk management approaches that have been mostly focused on meeting project budget and schedule objectives, the proposed approach intends to address the risks that may cause ERP system usage failure. The approach can be used to identify the root causes of ERP system implementation usage failure and quantify the impact of critical component failures or critical risk events in the implementation process.

Design and Implementation of the PMS Module for ’Argos’

DTIC Science & Technology

1989-12-01

designing , and implementing a fully workable Planned Maintenance System (PMS). This implementation demonstrates both the capabilities and benefits such a...analyzing, designing , and implementing a fully workable Planned Maintenance System (PMS). This implementation demonstrates both the capabilities and... design and implementation. PMS is the system developed by the navy to provide each ship, department, and supervisor with the tools needed to plan

Agency responses to a system-driven implementation of multiple evidence-based practices in children's mental health services.

PubMed

Regan, Jennifer; Lau, Anna S; Barnett, Miya; Stadnick, Nicole; Hamilton, Alison; Pesanti, Keri; Bando, Lillian; Brookman-Frazee, Lauren

2017-09-19

Large mental health systems are increasingly using fiscal policies to encourage the implementation of multiple evidence-based practices (EBPs). Although many implementation strategies have been identified, little is known about the types and impacts of strategies that are used by organizations within implementation as usual. This study examined organizational-level responses to a fiscally-driven, rapid, and large scale EBP implementation in children's mental health within the Los Angeles County Department of Mental Health. Qualitative methods using the principles of grounded theory were used to characterize the responses of 83 community-based agencies to the implementation effort using documentation from site visits conducted 2 years post reform. Findings indicated that agencies perceived the rapid system-driven implementation to have both positive and negative organizational impacts. Identified challenges were primarily related to system implementation requirements rather than to characteristics of specific EBPs. Agencies employed a variety of implementation strategies in response to the system-driven implementation, with agency size associated with implementation strategies used. Moderate- and large-sized agencies were more likely than small agencies to have employed systematic strategies at multiple levels (i.e., organization, therapist, client) to support implementation. These findings are among the first to characterize organizational variability in response to system-driven implementation and suggest ways that implementation interventions might be tailored by organizational characteristics.

40 CFR 35.929-3 - Implementation of the user charge system.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 1 2014-07-01 2014-07-01 false Implementation of the user charge... Water Act § 35.929-3 Implementation of the user charge system. (a) When a grantee's user charge system is approved, implementation of the approved system shall become a condition of the grant. (b) The...

40 CFR 35.929-3 - Implementation of the user charge system.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 1 2011-07-01 2011-07-01 false Implementation of the user charge... Water Act § 35.929-3 Implementation of the user charge system. (a) When a grantee's user charge system is approved, implementation of the approved system shall become a condition of the grant. (b) The...

40 CFR 35.929-3 - Implementation of the user charge system.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 1 2013-07-01 2013-07-01 false Implementation of the user charge... Water Act § 35.929-3 Implementation of the user charge system. (a) When a grantee's user charge system is approved, implementation of the approved system shall become a condition of the grant. (b) The...

40 CFR 35.929-3 - Implementation of the user charge system.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Implementation of the user charge... Water Act § 35.929-3 Implementation of the user charge system. (a) When a grantee's user charge system is approved, implementation of the approved system shall become a condition of the grant. (b) The...

40 CFR 35.928-3 - Implementation of the industrial cost recovery system.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Implementation of the industrial cost...-Clean Water Act § 35.928-3 Implementation of the industrial cost recovery system. (a) When a grantee's industrial cost recovery system is approved, implementation of the approved system shall become a condition...

Investigating and Learning Lessons from Early Experiences of Implementing ePrescribing Systems into NHS Hospitals: A Questionnaire Study

PubMed Central

Cresswell, Kathrin; Coleman, Jamie; Slee, Ann; Williams, Robin; Sheikh, Aziz

2013-01-01

Background ePrescribing systems have significant potential to improve the safety and efficiency of healthcare, but they need to be carefully selected and implemented to maximise benefits. Implementations in English hospitals are in the early stages and there is a lack of standards guiding the procurement, functional specifications, and expected benefits. We sought to provide an updated overview of the current picture in relation to implementation of ePrescribing systems, explore existing strategies, and identify early lessons learned. Methods A descriptive questionnaire-based study, which included closed and free text questions and involved both quantitative and qualitative analysis of the data generated. Results We obtained responses from 85 of 108 NHS staff (78.7% response rate). At least 6% (n = 10) of the 168 English NHS Trusts have already implemented ePrescribing systems, 2% (n = 4) have no plans of implementing, and 34% (n = 55) are planning to implement with intended rapid implementation timelines driven by high expectations surrounding improved safety and efficiency of care. The majority are unclear as to which system to choose, but integration with existing systems and sophisticated decision support functionality are important decisive factors. Participants highlighted the need for increased guidance in relation to implementation strategy, system choice and standards, as well as the need for top-level management support to adequately resource the project. Although some early benefits were reported by hospitals that had already implemented, the hoped for benefits relating to improved efficiency and cost-savings remain elusive due to a lack of system maturity. Conclusions Whilst few have begun implementation, there is considerable interest in ePrescribing systems with ambitious timelines amongst those hospitals that are planning implementations. In order to ensure maximum chances of realising benefits, there is a need for increased guidance in relation to implementation strategy, system choice and standards, as well as increased financial resources to fund local activities. PMID:23335961

Facilitating Ambulatory Electronic Health Record System Implementation: Evidence from a Qualitative Study

PubMed Central

Hefner, Jennifer; Robbins, Julie; Huerta, Timothy R.

2013-01-01

Background. Ambulatory care practices have increasing interest in leveraging the capabilities of electronic health record (EHR) systems, but little information is available documenting how organizations have successfully implemented these systems. Objective. To characterize elements of successful electronic health record (EHR) system implementation and to synthesize the key informants' perspectives about successful implementation practices. Methods. Key informant interviews and focus groups were conducted with a purposive sample of individuals from US healthcare organizations identified for their success with ambulatory EHR implementation. Rigorous qualitative data analyses used both deductive and inductive methods. Results. Participants identified personal and system-related barriers, at both the individual and organization levels, including poor computer skills, productivity losses, resistance to change, and EHR system failure. Implementation success was reportedly facilitated by careful planning and consistent communication throughout distinct stages of the implementation process. A significant element of successful implementation was an emphasis on optimization, both during “go-live” and, subsequently, when users had more experience with the system. Conclusion. Successful EHR implementation requires both detailed planning and clear mechanisms to deal with unforeseen or unintended consequences. Focusing on user buy-in early and including plans for optimization can facilitate greater success. PMID:24228257

Mixed methods for implementation research: application to evidence-based practice implementation and staff turnover in community-based organizations providing child welfare services.

PubMed

Aarons, Gregory A; Fettes, Danielle L; Sommerfeld, David H; Palinkas, Lawrence A

2012-02-01

Many public sector service systems and provider organizations are in some phase of learning about or implementing evidence-based interventions. Child welfare service systems represent a context where implementation spans system, management, and organizational concerns. Research utilizing mixed methods that combine qualitative and quantitative design, data collection, and analytic approaches are particularly well suited to understanding both the process and outcomes of dissemination and implementation efforts in child welfare systems. This article describes the process of using mixed methods in implementation research and provides an applied example of an examination of factors impacting staff retention during an evidence-based intervention implementation in a statewide child welfare system. The authors integrate qualitative data with previously published quantitative analyses of job autonomy and staff turnover during this statewide implementation project in order to illustrate the utility of mixed method approaches in providing a more comprehensive understanding of opportunities and challenges in implementation research.

Mixed Methods for Implementation Research: Application to Evidence-Based Practice Implementation and Staff Turnover in Community Based Organizations Providing Child Welfare Services

PubMed Central

Aarons, Gregory A.; Fettes, Danielle L.; Sommerfeld, David H.; Palinkas, Lawrence

2013-01-01

Many public sector services systems and provider organizations are in some phase of learning about or implementing evidence-based interventions. Child welfare service systems represent a context where implementation spans system, management, and organizational concerns. Research utilizing mixed methods that combine qualitative and quantitative design, data collection, and analytic approaches are particularly well-suited to understanding both the process and outcomes of dissemination and implementation efforts in child welfare systems. This paper describes the process of using mixed methods in implementation research and provides an applied example of an examination of factors impacting staff retention during an evidence-based intervention implementation in a statewide child welfare system. We integrate qualitative data with previously published quantitative analyses of job autonomy and staff turnover during this statewide implementation project in order to illustrate the utility of mixed method approaches in providing a more comprehensive understanding of opportunities and challenges in implementation research. PMID:22146861

Framework for Evaluating Educational Systemic Initiatives.

ERIC Educational Resources Information Center

Ikegulu, T. Nelson

This paper describes the implementation of the Holistic Systemic Evaluation (HSE), a component of an Education Systemic Initiative's strategic management. The HSE provides general guidance for the implementation and continual improvement of an Education Systemic Initiative Reform (ESIR). The implementation of the education system initiative plan:…

Integrating evidence-based practices for increasing cancer screenings in safety net health systems: a multiple case study using the Consolidated Framework for Implementation Research.

PubMed

Liang, Shuting; Kegler, Michelle C; Cotter, Megan; Emily, Phillips; Beasley, Derrick; Hermstad, April; Morton, Rentonia; Martinez, Jeremy; Riehman, Kara

2016-08-02

Implementing evidence-based practices (EBPs) to increase cancer screenings in safety net primary care systems has great potential for reducing cancer disparities. Yet there is a gap in understanding the factors and mechanisms that influence EBP implementation within these high-priority systems. Guided by the Consolidated Framework for Implementation Research (CFIR), our study aims to fill this gap with a multiple case study of health care safety net systems that were funded by an American Cancer Society (ACS) grants program to increase breast and colorectal cancer screening rates. The initiative funded 68 safety net systems to increase cancer screening through implementation of evidence-based provider and client-oriented strategies. Data are from a mixed-methods evaluation with nine purposively selected safety net systems. Fifty-two interviews were conducted with project leaders, implementers, and ACS staff. Funded safety net systems were categorized into high-, medium-, and low-performing cases based on the level of EBP implementation. Within- and cross-case analyses were performed to identify CFIR constructs that influenced level of EBP implementation. Of 39 CFIR constructs examined, six distinguished levels of implementation. Two constructs were from the intervention characteristics domain: adaptability and trialability. Three were from the inner setting domain: leadership engagement, tension for change, and access to information and knowledge. Engaging formally appointed internal implementation leaders, from the process domain, also distinguished level of implementation. No constructs from the outer setting or individual characteristics domain differentiated systems by level of implementation. Our study identified a number of influential CFIR constructs and illustrated how they impacted EBP implementation across a variety of safety net systems. Findings may inform future dissemination efforts of EBPs for increasing cancer screening in similar settings. Moreover, our analytic approach is similar to previous case studies using CFIR and hence could facilitate comparisons across studies.

Software architecture for intelligent image processing using Prolog

NASA Astrophysics Data System (ADS)

Jones, Andrew C.; Batchelor, Bruce G.

1994-10-01

We describe a prototype system for interactive image processing using Prolog, implemented by the first author on an Apple Macintosh computer. This system is inspired by Prolog+, but differs from it in two particularly important respects. The first is that whereas Prolog+ assumes the availability of dedicated image processing hardware, with which the Prolog system communicates, our present system implements image processing functions in software using the C programming language. The second difference is that although our present system supports Prolog+ commands, these are implemented in terms of lower-level Prolog predicates which provide a more flexible approach to image manipulation. We discuss the impact of the Apple Macintosh operating system upon the implementation of the image-processing functions, and the interface between these functions and the Prolog system. We also explain how the Prolog+ commands have been implemented. The system described in this paper is a fairly early prototype, and we outline how we intend to develop the system, a task which is expedited by the extensible architecture we have implemented.

The chiropractic care of patients with cancer: a systematic review of the literature.

PubMed

Alcantara, Joel; Alcantara, Joey D; Alcantara, Junjoe

2012-12-01

Cancer is the leading cause of death worldwide and accounted for 7.4 million deaths in 2004. By 2030, deaths from cancer have been estimated at 12 million with 30% being preventable. Complementary and alternative medicine remains popular among cancer patients; particularly with chiropractic services. However, the nature of the chiropractic clinical encounter and its reported benefits remains to be fully investigated. Towards these efforts, we begin with a systematic review of the literature on the chiropractic care of patients with cancer. The following electronic databases were searched: MANTIS [1965-2010]; Index to Chiropractic Literature [1984-2010]; Pubmed [1966-2010]; Medline [1965-2010] EMBASE [1974-2010], AMED [1975-2010], CINAHL Plus [1965-2010], Alt-Health Watch [1965-2010] and PsychINFO [1965-2010]. Key words used were "cancer" and "neoplasm" in Boolean combination with "chiropractic." Primary investigation/reports in peer-reviewed English journals involving chiropractic care were reviewed. Our review revealed 60 case reports, 2 case series, 21 commentaries, 2 survey studies, and 2 literature reviews. The case reports were diagnostic with commentaries highlighting the importance of recognizing the patient presenting with NMS complaints due to an underlying neoplasm. The chiropractic clinical encounter prior to cancer diagnosis and subsequent medical referral is poorly characterized in the literature. Patients with cancer seek the care of chiropractors. The literature does not reflect or describe the totality of the chiropractic clinical encounter. We encourage further research in this field.

Gene characteristics of the complete mitochondrial genomes of Paratoxodera polyacantha and Toxodera hauseri (Mantodea: Toxoderidae)

PubMed Central

Zhang, Le-Ping; Cai, Yin-Yin; Yu, Dan-Na; Storey, Kenneth B.

2018-01-01

The family Toxoderidae (Mantodea) contains an ecologically diverse group of praying mantis species that have in common greatly elongated bodies. In this study, we sequenced and compared the complete mitochondrial genomes of two Toxoderidae species, Paratoxodera polyacantha and Toxodera hauseri, and compared their mitochondrial genome characteristics with another member of the Toxoderidae, Stenotoxodera porioni (KY689118). The lengths of the mitogenomes of T. hauseri and P. polyacantha were 15,616 bp and 15,999 bp, respectively, which is similar to that of S. porioni (15,846 bp). The size of each gene as well as the A+T-rich region and the A+T content of the whole genome were also very similar among the three species as were the protein-coding genes, the A+T content and the codon usages. The mitogenome of T. hauseri had the typical 22 tRNAs, whereas that of P. polyacantha had 26 tRNAs including an extra two copies of trnA-trnR. Intergenic regions of 67 bp and 76 bp were found in T. hauseri and P. polyacantha, respectively, between COX2 and trnK; these can be explained as residues of a tandem duplication/random loss of trnK and trnD. This non-coding region may be synapomorphic for Toxoderidae. In BI and ML analyses, the monophyly of Toxoderidae was supported and P. polyacantha was the sister clade to T. hauseri and S. porioni. PMID:29686943

Comparative investigations into the feeding ecology of six Mantodea species.

PubMed

Reitze, Margit; Nentwig, Wolfgang

1991-05-01

Six mantid species (Sphodromantis viridis, Polyspilota aeruginosa, Hierodula unimaculata, Parasphendale agrionia, Mantis religiosa and Empusa pennata) were studied in laboratory feeding experiments. Mantids stalk their prey and pounce on it, grasping it with their forelegs. Only living prey is selected and it is consumed directly after the catch. The predator orients itself optically, and therefore only takes notice of moving prey. The maximum size of prey which mantids can overwhelm is species-specific and depends on the prey type. On average mantids eat crickets of 50% their own body-weight while cockroaches can weigh up to 110%. Feeding experiments with 101 species of potential prey of 21 invertebrate orders showed an average feeding rate of 70% and marked differences among the predators. Polyspilota proved to be the least specialized mantid and Empusa caught the smallest amount of prey. Most of the defence mechanisms which arthropods have developed against their enemies proved to be ineffective against mantids. Neither a hard chitinous exoskeleton nor poisonous substances prevented the mantids from attacking their prey successfully. The protective secretion of the cotton stainer Dysdercus intermedius proved to be effective at least in a few instances. Even though these bugs were killed, the mantids usually refused to eat the abdomen, where the glands that produce the protective secretion are to be found. Thanatosis, as exhibited by the chrysomelid Cassida viridis and by the phasmid Carausius morosus, proved to be the best protection against mantids.

Strengthening the regulatory system through the implementation and use of a quality management system.

PubMed

Eisner, Reinhold; Patel, Rakeshkumar

2017-04-20

Quality management systems (QMS), based on ISO 9001 requirements, are applicable to government service organizations such as Health Canada's Biologics and Genetic Therapies Directorate (BGTD). This communication presents the process that the BGTD followed since the early 2000s to implement a quality management system and describes how the regulatory system was improved as a result of this project. BGTD undertook the implementation of a quality management system based on ISO 9001 and containing aspects of ISO 17025 with the goal of strengthening the regulatory system through improvements in the people, processes, and services of the organization. We discuss the strategy used by BGTD to implement the QMS and the benefits that were realized from the various stages of implementation. The eight quality principals upon which the QMS standards of the ISO 9000 series are based were used by senior management as a framework to guide QMS implementation.

System Issues Related to Implementing on the Internet

NASA Technical Reports Server (NTRS)

Mackey, William; Bagg, Thomas C., III

1999-01-01

Implementing capabilities on the World Wide Web should never be taken lightly. A good systems engineer is able to examine such implementations from all points of view, including political, legal, security, access, technical deployment, and quality. The evacuation discussed in this paper was conducted to ensure that the National Aeronautics and Space Administration (NASA) was proceeding in a correct direction by implementing RECALL a Lessons Learned System on the Web and, subsequently, did so successfully. The systems approach extended well beyond technical implementation to several issue that are not often addressed by an implementation team. The resulting evaluation increased the team's sensitivity to such issues and, in fact, the authors believe that the evaluation provided as much benefit as the system itself.

Participatory System Dynamics Modeling: Increasing Stakeholder Engagement and Precision to Improve Implementation Planning in Systems.

PubMed

Zimmerman, Lindsey; Lounsbury, David W; Rosen, Craig S; Kimerling, Rachel; Trafton, Jodie A; Lindley, Steven E

2016-11-01

Implementation planning typically incorporates stakeholder input. Quality improvement efforts provide data-based feedback regarding progress. Participatory system dynamics modeling (PSD) triangulates stakeholder expertise, data and simulation of implementation plans prior to attempting change. Frontline staff in one VA outpatient mental health system used PSD to examine policy and procedural "mechanisms" they believe underlie local capacity to implement evidence-based psychotherapies (EBPs) for PTSD and depression. We piloted the PSD process, simulating implementation plans to improve EBP reach. Findings indicate PSD is a feasible, useful strategy for building stakeholder consensus, and may save time and effort as compared to trial-and-error EBP implementation planning.

Implementation of Local Wellness Policies in Schools: Role of School Systems, School Health Councils, and Health Disparities

ERIC Educational Resources Information Center

Hager, Erin R.; Rubio, Diana S.; Eidel, G. Stewart; Penniston, Erin S.; Lopes, Megan; Saksvig, Brit I.; Fox, Renee E.; Black, Maureen M.

2016-01-01

Background: Written local wellness policies (LWPs) are mandated in school systems to enhance opportunities for healthy eating/activity. LWP effectiveness relies on school-level implementation. We examined factors associated with school-level LWP implementation. Hypothesized associations included system support for school-level implementation and…

Telephone system operations evaluation : before AOS implementation

DOT National Transportation Integrated Search

1999-01-01

This study provides a detailed baseline analysis of telephone system performance before AOS : implementation. By the time of the preparation of this report, the phone system component of : AOS had not been implemented.

Food safety systems in a small dairy factory: implementation, major challenges, and assessment of systems' performances.

PubMed

Cusato, Sueli; Gameiro, Augusto H; Corassin, Carlos H; Sant'ana, Anderson S; Cruz, Adriano G; Faria, José de Assis F; de Oliveira, Carlos Augusto F

2013-01-01

The present study describes the implementation of a food safety system in a dairy processing plant located in the State of São Paulo, Brazil, and the challenges found during the process. In addition, microbiological indicators have been used to assess system's implementation performance. The steps involved in the implementation of a food safety system included a diagnosis of the prerequisites, implementation of the good manufacturing practices (GMPs), sanitation standard operating procedures (SSOPs), training of the food handlers, and hazard analysis and critical control point (HACCP). In the initial diagnosis, conformity with 70.7% (n=106) of the items analyzed was observed. A total of 12 critical control points (CCPs) were identified: (1) reception of the raw milk, (2) storage of the raw milk, (3 and 4) reception of the ingredients and packaging, (5) milk pasteurization, (6 and 7) fermentation and cooling, (8) addition of ingredients, (9) filling, (10) storage of the finished product, (11) dispatching of the product, and (12) sanitization of the equipment. After implementation of the food safety system, a significant reduction in the yeast and mold count was observed (p<0.05). The main difficulties encountered for the implementation of food safety system were related to the implementation of actions established in the flow chart and to the need for constant training/adherence of the workers to the system. Despite this, the implementation of the food safety system was shown to be challenging, but feasible to be reached by small-scale food industries.

Flight elements: Fault detection and fault management

NASA Technical Reports Server (NTRS)

Lum, H.; Patterson-Hine, A.; Edge, J. T.; Lawler, D.

1990-01-01

Fault management for an intelligent computational system must be developed using a top down integrated engineering approach. An approach proposed includes integrating the overall environment involving sensors and their associated data; design knowledge capture; operations; fault detection, identification, and reconfiguration; testability; causal models including digraph matrix analysis; and overall performance impacts on the hardware and software architecture. Implementation of the concept to achieve a real time intelligent fault detection and management system will be accomplished via the implementation of several objectives, which are: Development of fault tolerant/FDIR requirement and specification from a systems level which will carry through from conceptual design through implementation and mission operations; Implementation of monitoring, diagnosis, and reconfiguration at all system levels providing fault isolation and system integration; Optimize system operations to manage degraded system performance through system integration; and Lower development and operations costs through the implementation of an intelligent real time fault detection and fault management system and an information management system.

Community Readiness Within Systems of Care: The Validity and Reliability of the System of Care Readiness and Implementation Measurement Scale (SOC-RIMS).

PubMed

Rosas, Scott R; Behar, Lenore B; Hydaker, William M

2016-01-01

Establishing a system of care requires communities to identify ways to successfully implement strategies and support positive outcomes for children and their families. Such community transformation is complex and communities vary in terms of their readiness for implementing sustainable community interventions. Assessing community readiness and guiding implementation, specifically for the funded communities implementing a system of care, requires a well-designed tool with sound psychometric properties. This scale development study used the results of a previously published concept mapping study to create, administer, and assess the psychometric characteristics of the System of Care Readiness and Implementation Measurement Scale (SOC-RIMS). The results indicate the SOC-RIMS possesses excellent internal consistency characteristics, measures clearly discernible dimensions of community readiness, and demonstrates the target constructs exist within a broad network of content. The SOC-RIMS can be a useful part of a comprehensive assessment in communities where system of care practices, principles, and philosophies are implemented and evaluated.

Evaluation criteria for district health management information systems: lessons from the Ministry of Health, Kenya.

PubMed

Odhiambo-Otieno, George W

2005-01-01

There has been no comprehensive evaluation of the district health management information systems (DHMISs) since the establishment of these systems by the Ministry of Health (MoH), in Kenya. This is partly due to lack of defined criteria for evaluating the systems. The objective of this study is to design evaluation criteria for assessing the viability, sustainability and ultimate contribution of DHMIS in the management of the district health system (DHS) in Kenya. This descriptive cross-sectional study was undertaken in three DHSs in Kenya. Empirical evidence was collected through interviews, complemented by a comprehensive review of relevant literature, reports and operational manuals of various health information systems in Kenya. A set of evaluation criteria for DHMISs in Kenya was designed for each of the three phases of implementation: phase one-pre-implementation evaluation criteria (categorized as policy and objectives, technical feasibility, financial viability, political viability and administrative operability) to be applied at the design stage; phase two-concurrent (operational) implementation evaluation criteria to be applied during implementation of the new system; phase three-post-implementation evaluation criteria (classified as internal-quality of information; external-resources and managerial support; ultimate-systems impact) to be applied after operating the implemented system for at least 3 years. In designing a DHMIS model there is need to have built-in these three sets of evaluation criteria which should be used in a phased manner. Pre-implementation evaluation criteria should be used to evaluate the system's viability before more resources are committed to its implementation; concurrent (operational) implementation evaluation criteria should be used to ascertain the status of the on-going implementation with the view to either fine-tune or abandon it altogether before more resources are used on it; and post-implementation evaluation criteria should be used to assess its overall effectiveness (if it has achieved its hypothesized benefits) towards the management of DHS.

Characteristics of Local Health Departments Associated with Implementation of Electronic Health Records and Other Informatics Systems.

PubMed

Shah, Gulzar H; Leider, Jonathon P; Castrucci, Brian C; Williams, Karmen S; Luo, Huabin

2016-01-01

Assessing local health departments' (LHDs') informatics capacities is important, especially within the context of broader, systems-level health reform. We assessed a nationally representative sample of LHDs' adoption of information systems and the factors associated with adoption and implementation by examining electronic health records, health information exchange, immunization registry, electronic disease reporting system, and electronic laboratory reporting. We used data from the National Association of County and City Health Officials' 2013 National Profile of LHDs. We performed descriptive statistics and multinomial logistic regression for the five implementation-oriented outcome variables of interest, with three levels of implementation (implemented, plan to implement, and no activity). Independent variables included infrastructural and financial capacity and other characteristics associated with informatics capacity. Of 505 LHDs that responded to the survey, 69 (13.5%) had implemented health information exchanges, 122 (22.2%) had implemented electronic health records, 245 (47.5%) had implemented electronic laboratory reporting, 368 (73.0%) had implemented an electronic disease reporting system, and 416 (83.8%) had implemented an immunization registry. LHD characteristics associated with health informatics adoption included provision of greater number of clinical services, greater per capita public health expenditures, health information systems specialists on staff, larger population size, decentralized governance system, one or more local boards of health, metropolitan jurisdiction, and top executive with more years in the job. Many LHDs lack health informatics capacity, particularly in smaller, rural jurisdictions. Cross-jurisdictional sharing, investment in public health informatics infrastructure, and additional training may help address these shortfalls.

Use of the Equity Implementation Model to Review Clinical System Implementation Efforts

PubMed Central

Lauer, Thomas W.; Joshi, Kailash; Browdy, Thomas

2000-01-01

This paper presents the equity implementation model (EIM) in the context of a case that describes the implementation of a medical scheduling system. The model is based on equity theory, a well-established theory in the social sciences that has been tested in hundreds of experimental and field studies. The predictions of equity theory have been supported in organizational, societal, family, and other social settings. Thus, the EIM helps provide a theory-based understanding for collecting and reviewing users' reactions to, and acceptance or rejection of, a new technology or system. The case study (implementation of a patient scheduling and appointment setting system in a large health maintenance organization) illustrates how the EIM can be used to examine users' reactions to the implementation of a new system. PMID:10641966

Evaluation criteria for the district health management information systems: lessons from the Ministry of Health, Kenya.

PubMed

Odhiambo-Otieno, George W; Odero, Wilson W O

2005-03-01

The District Health Management Information Systems (DHMISs) were established by the Ministry of Health (MoH) in Kenya more than two decades ago. Since then, no comprehensive evaluation has been undertaken. This can partly be attributed to lack of defined criteria for evaluating them. To propose evaluation criteria for assessing the design, implementation and impact of DHMIS in the management of the District Health System (DHS) in Kenya. A descriptive cross-sectional study conducted in three DHSs in Kenya: Bungoma, Murang'a and Uasin Gishu districts. Data was collected through focus group discussions, key informant interviews, and documents' review. The respondents, purposely selected from the Ministry of Health headquarters and the three DHS districts, included designers, managers and end-users of the systems. A set of evaluation criteria for DHMISs was identified for each of the three phases of implementation: pre-implementation evaluation criteria (categorised as policy and objectives, technical feasibility, financial viability, political viability and administrative operability) to be applied at the design stage; concurrent implementation evaluation criteria to be applied during implementation of the new system; and post-implementation evaluation criteria (classified as internal - quality of information; external - resources and managerial support; ultimate - systems impact) to be applied after implementation of the system for at least three years. In designing a DHMIS model there is need to have built-in these three sets of evaluation criteria which should be used in a phased manner. Pre-implementation evaluation criteria should be used to evaluate the system's viability before more resources are committed to it; concurrent (operational) - implementation evaluation criteria should be used to monitor the process; and post-implementation evaluation criteria should be applied to assess the system's effectiveness.

Implementation of enterprise resource planning systems: a user perspective

NASA Astrophysics Data System (ADS)

Reitsma, E.; Hilletofth, P.; Mukhtar, U.

2018-04-01

The purpose of this study is to evaluate critical success factors (CSFs) for the implementation of an enterprise resource planning (ERP) system from a user perspective. Users play a vital role when implementing an ERP system, but their perspective has been neglected in the literature. A better understanding of their perspective promises to contribute to the design of more effective ERP systems, its implementation, and management. In order to identify the user perspective, a survey was conducted within three Pakistani companies that recently have implemented a new ERP system. The questionnaire was developed based on thirteen CSFs deduced from literature. Based on each CSF’s level of importance, they are ranked in order of importance and divided into three groups: most important, important and not important. Findings reveal that users believe that management should prioritize the following four CSFs when implementing an ERP system: education and training, strategic decision-making, communication, and business process alignment.

Initial Implementation Indicators From a Statewide Rollout of SafeCare Within a Child Welfare System

PubMed Central

Whitaker, Daniel J.; Ryan, Kerry A.; Wild, Robert C.; Self-Brown, Shannon; Lutzker, John R.; Shanley, Jenelle R.; Edwards, Anna M.; McFry, Erin A.; Moseley, Colby N.; Hodges, Amanda E.

2013-01-01

There is a strong movement toward implementation of evidence-based practices (EBP) in child welfare systems. The SafeCare parenting model is one of few parent-training models that addresses child neglect, the most common form of maltreatment. Here, the authors describe initial findings from a statewide effort to implement the EBP, SafeCare®, into a state child welfare system. A total of 50 agencies participated in training, with 295 individuals entering training to implement SafeCare. Analyses were conducted to describe the trainee sample, describe initial training and implementation indicators, and to examine correlates of initial training performance and implementation indicators. The quality of SafeCare uptake during training and implementation was high with trainees performing very well on training quizzes and role-plays, and demonstrating high fidelity when implementing SafeCare in the field (performing over 90% of expected behaviors). However, the quantity of implementation was generally low, with relatively few providers (only about 25%) implementing the model following workshop training. There were no significant predictors of training or implementation performance, once corrections for multiple comparisons were applied. The Discussion focuses on challenges to large-scale system-wide implementation of EBP. PMID:22146860

21 CFR 111.55 - What are the requirements to implement a production and process control system?

Code of Federal Regulations, 2010 CFR

2010-04-01

... production and process control system? 111.55 Section 111.55 Food and Drugs FOOD AND DRUG ADMINISTRATION... to Establish a Production and Process Control System § 111.55 What are the requirements to implement a production and process control system? You must implement a system of production and process...

Design requirements for SRB production control system. Volume 4: Implementation

NASA Technical Reports Server (NTRS)

1981-01-01

The implementation plan which is presented was developed to provide the means for the successful implementation of the automated production control system. There are three factors which the implementation plan encompasses: detailed planning; phased implementation; and user involvement. The plan is detailed to the task level in terms of necessary activities as the system is developed, refined, installed, and tested. These tasks are scheduled, on a preliminary basis, over a two-and-one-half-year time frame.

From Programs to Systems: Deploying Implementation Science and Practice for Sustained Real World Effectiveness in Services for Children and Families.

PubMed

Ghate, Deborah

2016-01-01

The transfer of knowledge of effective practice, especially into "usual care" settings, remains challenging. This article argues that to close this gap we need to recognize the particular challenges of whole-system improvement. We need to move beyond a limited focus on individual programs and experimental research on their effectiveness. The rapidly developing field of implementation science and practice (ISP) provides a particular lens and a set of important constructs that can helpfully accelerate progress. A review of selected key constructs and distinctive features of ISP, including recognizing invisible system infrastructure, co-construction involving active collaboration between stakeholders, and attention to active implementation, supports for providers beyond education and training. Key aspects of an implementation lens likely to be most helpful in sustaining effectiveness include assisting innovators to identify and accommodate the architecture of existing systems, understand the implementation process as a series of distinct but nonlinear stages, identify implementation outcomes as prerequisites for treatment outcomes, and analyse implementation challenges using frameworks of implementation drivers. In complex adaptive systems, how services are implemented may matter more than their specific content, and how services align and adapt to local context may determine their sustained usefulness. To improve implementation-relevant research, we need better process evaluation and cannot rely on experimental methods that do not capture complex systemic contexts. Deployment of an implementation lens may perhaps help to avoid future "rigor mortis," enabling more productively flexible and integrative approaches to both program design and evaluation.

A multirotor platform for mapping and inspecting sub-vertical rock faces

NASA Astrophysics Data System (ADS)

Thoeni, Klaus; Renton, Christopher; Giacomini, Anna

2016-04-01

Only in recent years UAS technology has become accessible to everyone and, hence, it is rapidly becoming a valuable tool for researchers and scientists (Westoby et al., 2012; Nex and Remondino, 2014). Electric multicopters (i.e., multirotor helicopters) are one of the most exciting developments of the last couple of years. Only the development and implementation of advanced flight controllers made the use of multicopters possible. Generally being an aerodynamically unstable UAS they absolutely require a flight controller for stable flight. Several open-source and commercial flight controller are now available which makes it possible to build custom UAS. The current work presents a custom build hexacopter (i.e., a multicopter with six rotors) which was specifically developed for 3D mapping and inspection of sub-vertical rock faces. The main sensor installed on the platform is a Canon 100D DSLR camera. The camera is attached to a two axis gimbal. The roll angle is automatically controlled to keep the camera level during the flight whereas the user controls the tilt angle. The two forward facing arms of the hexacopter have been raised, i.e., they are located higher than the other four propellers (Mantis arms). This provides a clear field of view when looking forward and even makes it possible to look slightly upward without having the propellers in the field of view. A DJI A2 flight controller is installed on the platform and an additional FPV camera can be switched on if pictures are taken in manual mode. So far the flights are all performed in manual mode. The fact that the platform is generally flying very close to very irregular sub-vertical rock faces makes autonomous flights in GPS mode almost impossible. In addition, GPS reception is often very poor around sub-vertical rock faces. One main issue when flying in manual mode is to keep the hexacopter at a constant distance from the surface. As the rock surface gets higher and higher it becomes more and more difficult for the pilot to estimate this distance. Hence, some modifications are currently being implemented. A lightweight laser sensor will be installed to measure the distance between the drone and the sub-vertical rock surface in real time. The information will be transmitted to the pilot who can keep the hexacopter at the required distance. Some applications of the developed platform for the 3D mapping of highwalls in Australian coal mines are presented and the advantages over conventional methods (e.g., Thoeni et al., 2012) are discussed. References Nex, F., Remondino, F. (2014) UAV for 3D mapping applications: a review. Applied Geomatics 6(1), 1-15. Thoeni, K., Irschara, A., Giacomini, A. (2012) Efficient photogrammetric reconstruction of highwalls in open pit coal mines. 16th Australasian Remote Sensing and Photogrammetry Conference, 85-90. Westoby, M.J., Brasington, J., Glasser, N.F., Hambrey, M.J., Reynolds, J.M. (2012) 'Structure-from-Motion' photogrammetry: A low-cost, effective tool for geoscience applications. Geomorphology 179, 300-314.

Fault-tolerant software - Experiment with the sift operating system. [Software Implemented Fault Tolerance computer

NASA Technical Reports Server (NTRS)

Brunelle, J. E.; Eckhardt, D. E., Jr.

1985-01-01

Results are presented of an experiment conducted in the NASA Avionics Integrated Research Laboratory (AIRLAB) to investigate the implementation of fault-tolerant software techniques on fault-tolerant computer architectures, in particular the Software Implemented Fault Tolerance (SIFT) computer. The N-version programming and recovery block techniques were implemented on a portion of the SIFT operating system. The results indicate that, to effectively implement fault-tolerant software design techniques, system requirements will be impacted and suggest that retrofitting fault-tolerant software on existing designs will be inefficient and may require system modification.

Expanding Learning and Social Interaction through Intelligent Systems Design: Implementing a Reputation and Recommender System for the Claremont Conversation Online

ERIC Educational Resources Information Center

Thoms, Brian

2009-01-01

In this dissertation I examine the design, construction and implementation of an online blog ratings and user recommender system for the Claremont Conversation Online (CCO). In line with constructivist learning models and practical information systems (IS) design, I implemented a blog ratings system (a system that can be extended to allow for…

PC-based Multiple Information System Interface (PC/MISI) detailed design and implementation plan

NASA Technical Reports Server (NTRS)

Dominick, Wayne D. (Editor); Hall, Philip P.

1985-01-01

The design plan for the personal computer multiple information system interface (PC/MISI) project is discussed. The document is intended to be used as a blueprint for the implementation of the system. Each component is described in the detail necessary to allow programmers to implement the system. A description of the system data flow and system file structures is given.

The Impact of Implementing a Demand Forecasting System into a Low-Income Country’s Supply Chain

PubMed Central

Mueller, Leslie E.; Haidari, Leila A.; Wateska, Angela R.; Phillips, Roslyn J.; Schmitz, Michelle M.; Connor, Diana L.; Norman, Bryan A.; Brown, Shawn T.; Welling, Joel S.; Lee, Bruce Y.

2016-01-01

OBJECTIVE To evaluate the potential impact and value of applications (e.g., ordering levels, storage capacity, transportation capacity, distribution frequency) of data from demand forecasting systems implemented in a lower-income country’s vaccine supply chain with different levels of population change to urban areas. MATERIALS AND METHODS Using our software, HERMES, we generated a detailed discrete event simulation model of Niger’s entire vaccine supply chain, including every refrigerator, freezer, transport, personnel, vaccine, cost, and location. We represented the introduction of a demand forecasting system to adjust vaccine ordering that could be implemented with increasing delivery frequencies and/or additions of cold chain equipment (storage and/or transportation) across the supply chain during varying degrees of population movement. RESULTS Implementing demand forecasting system with increased storage and transport frequency increased the number of successfully administered vaccine doses and lowered the logistics cost per dose up to 34%. Implementing demand forecasting system without storage/transport increases actually decreased vaccine availability in certain circumstances. DISCUSSION The potential maximum gains of a demand forecasting system may only be realized if the system is implemented to both augment the supply chain cold storage and transportation. Implementation may have some impact but, in certain circumstances, may hurt delivery. Therefore, implementation of demand forecasting systems with additional storage and transport may be the better approach. Significant decreases in the logistics cost per dose with more administered vaccines support investment in these forecasting systems. CONCLUSION Demand forecasting systems have the potential to greatly improve vaccine demand fulfillment, and decrease logistics cost/dose when implemented with storage and transportation increases direct vaccines. Simulation modeling can demonstrate the potential health and economic benefits of supply chain improvements. PMID:27219341

The impact of implementing a demand forecasting system into a low-income country's supply chain.

PubMed

Mueller, Leslie E; Haidari, Leila A; Wateska, Angela R; Phillips, Roslyn J; Schmitz, Michelle M; Connor, Diana L; Norman, Bryan A; Brown, Shawn T; Welling, Joel S; Lee, Bruce Y

2016-07-12

To evaluate the potential impact and value of applications (e.g. adjusting ordering levels, storage capacity, transportation capacity, distribution frequency) of data from demand forecasting systems implemented in a lower-income country's vaccine supply chain with different levels of population change to urban areas. Using our software, HERMES, we generated a detailed discrete event simulation model of Niger's entire vaccine supply chain, including every refrigerator, freezer, transport, personnel, vaccine, cost, and location. We represented the introduction of a demand forecasting system to adjust vaccine ordering that could be implemented with increasing delivery frequencies and/or additions of cold chain equipment (storage and/or transportation) across the supply chain during varying degrees of population movement. Implementing demand forecasting system with increased storage and transport frequency increased the number of successfully administered vaccine doses and lowered the logistics cost per dose up to 34%. Implementing demand forecasting system without storage/transport increases actually decreased vaccine availability in certain circumstances. The potential maximum gains of a demand forecasting system may only be realized if the system is implemented to both augment the supply chain cold storage and transportation. Implementation may have some impact but, in certain circumstances, may hurt delivery. Therefore, implementation of demand forecasting systems with additional storage and transport may be the better approach. Significant decreases in the logistics cost per dose with more administered vaccines support investment in these forecasting systems. Demand forecasting systems have the potential to greatly improve vaccine demand fulfilment, and decrease logistics cost/dose when implemented with storage and transportation increases. Simulation modeling can demonstrate the potential health and economic benefits of supply chain improvements. Copyright © 2016 Elsevier Ltd. All rights reserved.

What You See Depends on Your Point of View: Comparison of Greenness Indices Across Spatial and Temporal Scales and What That Means for Mule Deer Migration and Fitness

NASA Astrophysics Data System (ADS)

Miller, B. W.; Chong, G.; Steltzer, H.; Aikens, E.; Morisette, J. T.; Talbert, C.; Talbert, M.; Shory, R.; Krienert, J. M.; Gurganus, D.

2015-12-01

Climate change models for the north­ern Rocky Mountains predict warming and changes in water availability that may alter vegetation. Changes to vegetation may include timing of plant life-history events, or phenology, such as green-up, flower­ing, and senescence. These changes could make forage available earlier in the growing season, but shifts in phenol­ogy may also result in earlier senescence (die-off or dormancy) and reduced overall production. Greenness indices such as the normalized difference vegetation index (NDVI) are regularly used to quantify greenness over large areas using remotely sensed reflectance data. The timing and scale of current satellite data, however, may be insufficient to capture fine-scale differences in phenology that are important indicators of habitat quality. The Wyoming Range Mule Deer herd is one of the largest in the west but it declined precipitously in the early 1990s and has not recovered. Accurate measurement of greenness over space and time would allow managers to better understand the role of plant phenology and productivity in mule deer population dynamics, for example. To connect spatial and temporal patterns of plant productivity with habitat quality, we compare greenness patterns (MODIS data) with migratory mule deer movement (GPS collars). Sagebrush systems provide winter habitat for mule deer. To understand sagebrush phenology as an indicator of productivity, we constructed NDVI time series and compared dates of phenological stages and magnitudes of greenness from three perspectives: at-surface/species-specific (mantis sensors: downward looking, <1m above vegetation); near surface/site-specific (PhenoCam: oblique, 2m); and satellite/landscape-scale (varied platforms). Greenness indices from these sensors contribute unique insights to understanding vegetation phenology, snow cover and reflectance. Understanding phenology and productivity at multiple scales can help guide resource management decisions related to habitat quality, and evaluate what remotely sensed phenology measurements mean on the ground. Monitoring changes in phenology and productivity over the long-term can provide insight into ecosystem responses to climate change.

Computing the sensitivity of drag and lift in flow past a circular cylinder: Time-stepping versus self-consistent analysis

NASA Astrophysics Data System (ADS)

Meliga, Philippe

2017-07-01

We provide in-depth scrutiny of two methods making use of adjoint-based gradients to compute the sensitivity of drag in the two-dimensional, periodic flow past a circular cylinder (Re≲189 ): first, the time-stepping analysis used in Meliga et al. [Phys. Fluids 26, 104101 (2014), 10.1063/1.4896941] that relies on classical Navier-Stokes modeling and determines the sensitivity to any generic control force from time-dependent adjoint equations marched backwards in time; and, second, a self-consistent approach building on the model of Mantič-Lugo et al. [Phys. Rev. Lett. 113, 084501 (2014), 10.1103/PhysRevLett.113.084501] to compute semilinear approximations of the sensitivity to the mean and fluctuating components of the force. Both approaches are applied to open-loop control by a small secondary cylinder and allow identifying the sensitive regions without knowledge of the controlled states. The theoretical predictions obtained by time-stepping analysis reproduce well the results obtained by direct numerical simulation of the two-cylinder system. So do the predictions obtained by self-consistent analysis, which corroborates the relevance of the approach as a guideline for efficient and systematic control design in the attempt to reduce drag, even though the Reynolds number is not close to the instability threshold and the oscillation amplitude is not small. This is because, unlike simpler approaches relying on linear stability analysis to predict the main features of the flow unsteadiness, the semilinear framework encompasses rigorously the effect of the control on the mean flow, as well as on the finite-amplitude fluctuation that feeds back nonlinearly onto the mean flow via the formation of Reynolds stresses. Such results are especially promising as the self-consistent approach determines the sensitivity from time-independent equations that can be solved iteratively, which makes it generally less computationally demanding. We ultimately discuss the extent to which relevant information can be gained from a hybrid modeling computing self-consistent sensitivities from the postprocessing of DNS data. Application to alternative control objectives such as increasing the lift and alleviating the fluctuating drag and lift is also discussed.

Implementation and evaluation of the Sacramento Regional Transportation Management Center Weather Alert Notification System.

DOT National Transportation Integrated Search

2010-08-01

This report presents the results of an evaluation of Caltrans District 3 Regional Transportation Management Centers (RTMC) implementation of a weather alert notification system. This alert system was selected for implementation from among several ...

Implementing injury surveillance systems alongside injury prevention programs: evaluation of an online surveillance system in a community setting.

PubMed

Ekegren, Christina L; Donaldson, Alex; Gabbe, Belinda J; Finch, Caroline F

Previous research aimed at improving injury surveillance standards has focused mainly on issues of data quality rather than upon the implementation of surveillance systems. There are numerous settings where injury surveillance is not mandatory and having a better understanding of the barriers to conducting injury surveillance would lead to improved implementation strategies. One such setting is community sport, where a lack of available epidemiological data has impaired efforts to reduce injury. This study aimed to i) evaluate use of an injury surveillance system following delivery of an implementation strategy; and ii) investigate factors influencing the implementation of the system in community sports clubs. A total of 78 clubs were targeted for implementation of an online injury surveillance system (approximately 4000 athletes) in five community Australian football leagues concurrently enrolled in a pragmatic trial of an injury prevention program called FootyFirst. System implementation was evaluated quantitatively, using the RE-AIM framework, and qualitatively, via semi-structured interviews with targeted-users. Across the 78 clubs, there was 69% reach, 44% adoption, 23% implementation and 9% maintenance. Reach and adoption were highest in those leagues receiving concurrent support for the delivery of FootyFirst. Targeted-users identified several barriers and facilitators to implementation including personal (e.g. belief in the importance of injury surveillance), socio-contextual (e.g. understaffing and athlete underreporting) and systems factors (e.g. the time taken to upload injury data into the online system). The injury surveillance system was implemented and maintained by a small proportion of clubs. Outcomes were best in those leagues receiving concurrent support for the delivery of FootyFirst, suggesting that engagement with personnel at all levels can enhance uptake of surveillance systems. Interview findings suggest that increased uptake could also be achieved by educating club personnel on the importance of recording injuries, developing clearer injury surveillance guidelines, increasing club staffing and better remunerating those who conduct surveillance, as well as offering flexible surveillance systems in a range of accessible formats. By increasing the usage of surveillance systems, data will better represent the target population and increase our understanding of the injury problem, and how to prevent it, in specific settings.

Investigating the Implementation of Knowledge Representation in the COMBATXXI System

DTIC Science & Technology

2015-06-01

mechanism. Finally, follow-on research can work towards more cognitive modeling in order to distinguish between manned systems and unmanned systems in...Approved for public release; distribution is unlimited INVESTIGATING THE IMPLEMENTATION OF KNOWLEDGE REPRESENTATION IN THE COMBATXXI SYSTEM by Mongi...INVESTIGATING THE IMPLEMENTATION OF KNOWLEDGE REPRESENTATION IN THE COMBATXXI SYSTEM 5. FUNDING NUMBERS GM10331601, National Institute of General

Fast and robust control of nanopositioning systems: Performance limits enabled by field programmable analog arrays.

PubMed

Baranwal, Mayank; Gorugantu, Ram S; Salapaka, Srinivasa M

2015-08-01

This paper aims at control design and its implementation for robust high-bandwidth precision (nanoscale) positioning systems. Even though modern model-based control theoretic designs for robust broadband high-resolution positioning have enabled orders of magnitude improvement in performance over existing model independent designs, their scope is severely limited by the inefficacies of digital implementation of the control designs. High-order control laws that result from model-based designs typically have to be approximated with reduced-order systems to facilitate digital implementation. Digital systems, even those that have very high sampling frequencies, provide low effective control bandwidth when implementing high-order systems. In this context, field programmable analog arrays (FPAAs) provide a good alternative to the use of digital-logic based processors since they enable very high implementation speeds, moreover with cheaper resources. The superior flexibility of digital systems in terms of the implementable mathematical and logical functions does not give significant edge over FPAAs when implementing linear dynamic control laws. In this paper, we pose the control design objectives for positioning systems in different configurations as optimal control problems and demonstrate significant improvements in performance when the resulting control laws are applied using FPAAs as opposed to their digital counterparts. An improvement of over 200% in positioning bandwidth is achieved over an earlier digital signal processor (DSP) based implementation for the same system and same control design, even when for the DSP-based system, the sampling frequency is about 100 times the desired positioning bandwidth.

77 FR 50985 - National Advisory Committee for Implementation of the National Forest System Land Management...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-23

... National Forest System Land Management Planning Rule AGENCY: Forest Service, USDA. ACTION: Notice of meeting. SUMMARY: The National Advisory Committee for Implementation of the National Forest System Land... implementation of the National Forest System Land Management Rule. The meeting is open to the public. The purpose...

Analysis of cost and assessment of computerized patient record systems in Japan based on questionnaire survey.

PubMed

Zhang, W P; Yamauchi, K; Mizuno, S; Zhang, R; Huang, D M

2004-01-01

The purpose of this study was to clarify the implementation and maintenance costs of a computerized patient record (CPR) system by means of a questionnaire survey. Moreover, the benefits of CPR systems were evaluated to determine their contribution to enhancing the quality of medical care and hospital management. Data were collected by a questionnaire survey mailed out to participants. The per-bed mean cost for implementation was 14,308 dollars (range: 3538-38,077 dollars). The mean annual maintenance cost for the CPR system was 457,615 dollars (range: 39,769-2,307,692 dollars). The multivariate analysis (Hayashi's Quantification Type I) revealed high partial correlation coefficients between implementation cost and the CPR system maker. In addition, the multiple correlation coefficient for four factors (CPR system maker, number of servers, institution type and implementation date) in predicting implementation cost was 0.798. Over 60% of respondents replied that their satisfaction with the CPR system was 'very high' or 'high.' Eighty-two percent of the hospitals responded positively that CPR systems improve the quality of medical care, and 70% felt that the systems help prevent medical errors. Our findings indicate that the maker of CPR system, number of servers, institution type and implementation date had a strong influence on per-bed implementation costs in that order. Finally, it was found that CPR systems were considered effective for hospital administration and medical examinations, based on the high assessments of the results of installing a CPR system.

Key Attributes of a Successful Physician Order Entry System Implementation in a Multi-hospital Environment

PubMed Central

Ahmad, Asif; Teater, Phyllis; Bentley, Thomas D.; Kuehn, Lynn; Kumar, Rajee R.; Thomas, Andrew; Mekhjian, Hagop S.

2002-01-01

The benefits of computerized physician order entry have been widely recognized, although few institutions have successfully installed these systems. Obstacles to successful implementation are organizational as well as technical. In the spring of 2000, following a 4-year period of planning and customization, a 9-month pilot project, and a 14-month hiatus for year 2000, the Ohio State University Health System extensively implemented physician order entry across inpatient units. Implementation for specialty and community services is targeted for completion in 2002. On implemented units, all orders are processed through the system, with 80 percent being entered by physicians and the rest by nursing or other licensed care providers. The system is deployable across diverse clinical environments, focused on physicians as the primary users, and accepted by clinicians. These are the three criteria by which the authors measured the success of their implementation. They believe that the availability of specialty-specific order sets, the engagement of physician leadership, and a large-scale system implementation were key strategic factors that enabled physician-users to accept a physician order entry system despite significant changes in workflow. PMID:11751800

Foundational Report Series: Advanced Distribution Management Systems for Grid Modernization, Implementation Strategy for a Distribution Management System

DOE Office of Scientific and Technical Information (OSTI.GOV)

Singh, Ravindra; Reilly, James T.; Wang, Jianhui

Electric distribution utilities encounter many challenges to successful deployment of Distribution Management Systems (DMSs). The key challenges are documented in this report, along with suggestions for overcoming them. This report offers a recommended list of activities for implementing a DMS. It takes a strategic approach to implementing DMS from a project management perspective. The project management strategy covers DMS planning, procurement, design, building, testing, Installation, commissioning, and system integration issues and solutions. It identifies the risks that are associated with implementation and suggests strategies for utilities to use to mitigate them or avoid them altogether. Attention is given to commonmore » barriers to successful DMS implementation. This report begins with an overview of the implementation strategy for a DMS and proceeds to put forward a basic approach for procuring hardware and software for a DMS; designing the interfaces with external corporate computing systems such as EMS, GIS, OMS, and AMI; and implementing a complete solution.« less

Implementing Student Information Systems

ERIC Educational Resources Information Center

Sullivan, Laurie; Porter, Rebecca

2006-01-01

Implementing an enterprise resource planning system is a complex undertaking. Careful planning, management, communication, and staffing can make the difference between a successful and unsuccessful implementation. (Contains 3 tables.)

A methodology for Manufacturing Execution Systems (MES) implementation

NASA Astrophysics Data System (ADS)

Govindaraju, Rajesri; Putra, Krisna

2016-02-01

Manufacturing execution system is information systems (IS) application that bridges the gap between IS at the top level, namely enterprise resource planning (ERP), and IS at the lower levels, namely the automation systems. MES provides a media for optimizing the manufacturing process as a whole in a real time basis. By the use of MES in combination with the implementation of ERP and other automation systems, a manufacturing company is expected to have high competitiveness. In implementing MES, functional integration -making all the components of the manufacturing system able to work well together, is the most difficult challenge. For this, there has been an industry standard that specifies the sub-systems of a manufacturing execution systems and defines the boundaries between ERP systems, MES, and other automation systems. The standard is known as ISA-95. Although the advantages from the use of MES have been stated in some studies, not much research being done on how to implement MES effectively. The purpose of this study is to develop a methodology describing how MES implementation project should be managed, utilising the support of ISA- 95 reference model in the system development process. A proposed methodology was developed based on a general IS development methodology. The developed methodology were then revisited based on the understanding about the specific charateristics of MES implementation project found in an Indonesian steel manufacturing company implementation case. The case study highlighted the importance of applying an effective requirement elicitation method during innitial system assessment process, managing system interfaces and labor division in the design process, and performing a pilot deployment before putting the whole system into operation.

The Challenge of Implementing an ERP System in a Small and Medium Enterprise--A Teaching Case of ERP Project Management

ERIC Educational Resources Information Center

Xu, Hongjiang; Rondeau, Patrick J.; Mahenthiran, Sakthi

2011-01-01

Enterprise Resource Planning (ERP) system implementation projects are notoriously risky. While large-scale ERP cases continue to be developed, relatively few new ERP cases have been published that further ERP implementation education in small to medium size firms. This case details the implementation of a new ERP system in a medium sized…

Improving the Quality of Academic Services through Implementation of Internal Quality Assurance System in State Institute of Islamic Studies STS Jambi

ERIC Educational Resources Information Center

Iskandar

2017-01-01

Implementation of quality assurance systems in IAIN STS Jambi implemented in early 2012, through the build system of internal quality assurance based on ISO 9001: 2008, in the process of implementation required strong reasons behind not growing atmosphere of academic standards of accreditation of study programs and institutions that are reflected…

Implementation of Local Wellness Policies in Schools: Role of School Systems, School Health Councils, and Health Disparities.

PubMed

Hager, Erin R; Rubio, Diana S; Eidel, G Stewart; Penniston, Erin S; Lopes, Megan; Saksvig, Brit I; Fox, Renee E; Black, Maureen M

2016-10-01

Written local wellness policies (LWPs) are mandated in school systems to enhance opportunities for healthy eating/activity. LWP effectiveness relies on school-level implementation. We examined factors associated with school-level LWP implementation. Hypothesized associations included system support for school-level implementation and having a school-level wellness team/school health council (SHC), with stronger associations among schools without disparity enrollment (majority African-American/Hispanic or low-income students). Online surveys were administered: 24 systems (support), 1349 schools (LWP implementation, perceived system support, SHC). The state provided school demographics. Analyses included multilevel multinomial logistic regression. Response rates were 100% (systems)/55.2% (schools). Among schools, 44.0% had SHCs, 22.6% majority (≥75%) African-American/Hispanic students, and 25.5% majority (≥75%) low-income (receiving free/reduced-price meals). LWP implementation (17-items) categorized as none = 36.3%, low (1-5 items) = 36.3%, high (6+ items) = 27.4%. In adjusted models, greater likelihood of LWP implementation was observed among schools with perceived system support (high versus none relative risk ratio, RRR = 1.63, CI: 1.49, 1.78; low versus none RRR = 1.26, CI: 1.18, 1.36) and SHCs (high versus none RRR = 6.8, CI: 4.07, 11.37; low versus none RRR = 2.24, CI: 1.48, 3.39). Disparity enrollment did not moderate associations (p > .05). Schools with perceived system support and SHCs had greater likelihood of LWP implementation, with no moderating effect of disparity enrollment. SHCs/support may overcome LWP implementation obstacles related to disparities. © 2016, American School Health Association.

Systems consultation: protocol for a novel implementation strategy designed to promote evidence-based practice in primary care.

PubMed

Quanbeck, Andrew; Brown, Randall T; E Zgierska, Aleksandra; A Johnson, Roberta; Robinson, James M; Jacobson, Nora

2016-01-27

Adoption of evidence-based practices takes place at a glacial place in healthcare. This research will pilot test an innovative implementation strategy - systems consultation -intended to speed the adoption of evidence-based practice in primary care. The strategy is based on tenets of systems engineering and has been extensively tested in addiction treatment. Three innovations have been included in the strategy - translation of a clinical practice guideline into a checklist-based implementation guide, the use of physician peer coaches ('systems consultants') to help clinics implement the guide, and a focus on reducing variation in practices across prescribers and clinics. The implementation strategy will be applied to improving opioid prescribing practices in primary care, which may help ultimately mitigate the increasing prevalence of opioid abuse and addiction. The pilot test will compare four intervention clinics to four control clinics in a matched-pairs design. A leading clinical guideline for opioid prescribing has been translated into a checklist-based implementation guide in a systematic process that involved experts who wrote the guideline in consultation with implementation experts and primary care physicians. Two physicians with expertise in family and addiction medicine are serving as the systems consultants. Each systems consultant will guide two intervention clinics, using two site visits and follow-up communication by phone and email, to implement the translated guideline. Mixed methods will be used to test the feasibility, acceptability, and preliminary effectiveness of the implementation strategy in an evaluation that meets standards for 'fully developed use' of the RE-AIM framework (Reach, Effectiveness, Adoption, Implementation, Maintenance). The clinic will be the primary unit of analysis. The systems consultation implementation strategy is intended to generalize to the adoption of other clinical guidelines. This pilot test is intended to prepare for a large randomized clinical trial that will test the strategy against other implementation strategies, such as audit/feedback and academic detailing, used to close the gap between knowledge and practice. The systems consultation approach has the potential to shorten the famously long time it takes to implement evidence-based practices and clinical guidelines in healthcare.

Effect of a provincial system of stroke care delivery on stroke care and outcomes

PubMed Central

Kapral, Moira K.; Fang, Jiming; Silver, Frank L.; Hall, Ruth; Stamplecoski, Melissa; O’Callaghan, Christina; Tu, Jack V.

2013-01-01

Background: Systems of stroke care delivery have been promoted as a means of improving the quality of stroke care, but little is known about their effectiveness. We assessed the effect of the Ontario Stroke System, a province-wide strategy of regionalized stroke care delivery, on stroke care and outcomes in Ontario, Canada. Methods: We used population-based provincial administrative databases to identify all emergency department visits and hospital admissions for acute stroke and transient ischemic attack from Jan. 1, 2001, to Dec. 31, 2010. Using piecewise regression analyses, we assessed the effect of the full implementation of the Ontario Stroke System in 2005 on the proportion of patients who received care at stroke centres, and on rates of discharge to long-term care facilities and 30-day mortality after stroke. Results: We included 243 287 visits by patients with acute stroke or transient ischemic attack. The full implementation of the Ontario Stroke System in 2005 was associated with an increase in rates of care at stroke centres (before implementation: 40.0%; after implementation: 46.5%), decreased rates of discharge to long-term care facilities (before implementation: 16.9%; after implementation: 14.8%) and decreased 30-day mortality for hemorrhagic (before implementation: 38.3%; after implementation: 34.4%) and ischemic stroke (before implementation: 16.3%; after implementation: 15.7%). The system’s implementation was also associated with marked increases in the proportion of patients who received neuroimaging, thrombolytic therapy, care in a stroke unit and antithrombotic therapy. Interpretation: The implementation of an organized system of stroke care delivery was associated with improved processes of care and outcomes after stroke. PMID:23713072

JTRS/SCA and Custom/SDR Waveform Comparison

NASA Technical Reports Server (NTRS)

Oldham, Daniel R.; Scardelletti, Maximilian C.

2007-01-01

This paper compares two waveform implementations generating the same RF signal using the same SDR development system. Both waveforms implement a satellite modem using QPSK modulation at 1M BPS data rates with one half rate convolutional encoding. Both waveforms are partitioned the same across the general purpose processor (GPP) and the field programmable gate array (FPGA). Both waveforms implement the same equivalent set of radio functions on the GPP and FPGA. The GPP implements the majority of the radio functions and the FPGA implements the final digital RF modulator stage. One waveform is implemented directly on the SDR development system and the second waveform is implemented using the JTRS/SCA model. This paper contrasts the amount of resources to implement both waveforms and demonstrates the importance of waveform partitioning across the SDR development system.

On an LAS-integrated soft PLC system based on WorldFIP fieldbus.

PubMed

Liang, Geng; Li, Zhijun; Li, Wen; Bai, Yan

2012-01-01

Communication efficiency is lowered and real-time performance is not good enough in discrete control based on traditional WorldFIP field intelligent nodes in case that the scale of control in field is large. A soft PLC system based on WorldFIP fieldbus was designed and implemented. Link Activity Scheduler (LAS) was integrated into the system and field intelligent I/O modules acted as networked basic nodes. Discrete control logic was implemented with the LAS-integrated soft PLC system. The proposed system was composed of configuration and supervisory sub-systems and running sub-systems. The configuration and supervisory sub-system was implemented with a personal computer or an industrial personal computer; running subsystems were designed and implemented based on embedded hardware and software systems. Communication and schedule in the running subsystem was implemented with an embedded sub-module; discrete control and system self-diagnosis were implemented with another embedded sub-module. Structure of the proposed system was presented. Methodology for the design of the sub-systems was expounded. Experiments were carried out to evaluate the performance of the proposed system both in discrete and process control by investigating the effect of network data transmission delay induced by the soft PLC in WorldFIP network and CPU workload on resulting control performances. The experimental observations indicated that the proposed system is practically applicable. Copyright © 2011 ISA. Published by Elsevier Ltd. All rights reserved.

Ubiquitous-Severance Hospital Project: Implementation and Results

PubMed Central

Chang, Bung-Chul; Kim, Young-A; Kim, Jee Hea; Jung, Hae Kyung; Kang, Eun Hae; Kang, Hee Suk; Lee, Hyung Il; Kim, Yong Ook; Yoo, Sun Kook; Sunwoo, Ilnam; An, Seo Yong; Jeong, Hye Jeong

2010-01-01

Objectives The purpose of this study was to review an implementation of u-Severance information system with focus on electronic hospital records (EHR) and to suggest future improvements. Methods Clinical Data Repository (CDR) of u-Severance involved implementing electronic medical records (EMR) as the basis of EHR and the management of individual health records. EHR were implemented with service enhancements extending to the clinical decision support system (CDSS) and expanding the knowledge base for research with a repository for clinical data and medical care information. Results The EMR system of Yonsei University Health Systems (YUHS) consists of HP integrity superdome servers using MS SQL as a database management system and MS Windows as its operating system. Conclusions YUHS is a high-performing medical institution with regards to efficient management and customer satisfaction; however, after 5 years of implementation of u-Severance system, several limitations with regards to expandability and security have been identified. PMID:21818425

Ubiquitous-severance hospital project: implementation and results.

PubMed

Chang, Bung-Chul; Kim, Nam-Hyun; Kim, Young-A; Kim, Jee Hea; Jung, Hae Kyung; Kang, Eun Hae; Kang, Hee Suk; Lee, Hyung Il; Kim, Yong Ook; Yoo, Sun Kook; Sunwoo, Ilnam; An, Seo Yong; Jeong, Hye Jeong

2010-03-01

The purpose of this study was to review an implementation of u-Severance information system with focus on electronic hospital records (EHR) and to suggest future improvements. Clinical Data Repository (CDR) of u-Severance involved implementing electronic medical records (EMR) as the basis of EHR and the management of individual health records. EHR were implemented with service enhancements extending to the clinical decision support system (CDSS) and expanding the knowledge base for research with a repository for clinical data and medical care information. The EMR system of Yonsei University Health Systems (YUHS) consists of HP integrity superdome servers using MS SQL as a database management system and MS Windows as its operating system. YUHS is a high-performing medical institution with regards to efficient management and customer satisfaction; however, after 5 years of implementation of u-Severance system, several limitations with regards to expandability and security have been identified.

Data Compression for Maskless Lithography Systems: Architecture, Algorithms and Implementation

DTIC Science & Technology

2008-05-19

Data Compression for Maskless Lithography Systems: Architecture, Algorithms and Implementation Vito Dai Electrical Engineering and Computer Sciences...servers or to redistribute to lists, requires prior specific permission. Data Compression for Maskless Lithography Systems: Architecture, Algorithms and...for Maskless Lithography Systems: Architecture, Algorithms and Implementation Copyright 2008 by Vito Dai 1 Abstract Data Compression for Maskless

34 CFR 403.201 - What are the State's responsibilities for developing and implementing a statewide system of core...

Code of Federal Regulations, 2010 CFR

2010-07-01

... and implementing a statewide system of core standards and measures of performance? 403.201 Section 403... a statewide system of core standards and measures of performance? (a)(1) Each State board receiving funds under the Act shall develop and implement a statewide system of core standards and measures of...

Project USHER (Uniting Science and Humanness for Educational Redesign): A Proposal for Implementing a Humanistic Management System in Community Colleges.

ERIC Educational Resources Information Center

League for Innovation in the Community Coll., Los Angeles, CA.

Project USHER is designed to help community colleges implement a humanistic management system. This objective is to be achieved by giving each participating college the capability to redesign its own educational system through implementing a planning, programming, budgeting, and evaluation system (PPBE) within the context of participative…

Hospital staff views of prescribing and discharge communication before and after electronic prescribing system implementation.

PubMed

Mills, Pamela Ruth; Weidmann, Anita Elaine; Stewart, Derek

2017-12-01

Background Electronic prescribing system implementation is recommended to improve patient safety and general practitioner's discharge information communication. There is a paucity of information about hospital staff perspectives before and after system implementation. Objective To explore hospital staff views regarding prescribing and discharge communication systems before and after hospital electronic prescribing and medicines administration (HEPMA) system implementation. Setting A 560 bed United Kingdom district general hospital. Methods Semi-structured face-to-face qualitative interviews with a purposive sample of hospital staff involved in the prescribing and discharge communication process. Interviews transcribed verbatim and coded using the Framework Approach. Behavioural aspects mapped to Theoretical Domains Framework (TDF) to highlight associated behavioural change determinants. Main outcome measure Staff perceptions before and after implementation. Results Nineteen hospital staff (consultant doctors, junior doctors, pharmacists and advanced nurse practitioners) participated before and after implementation. Pre-implementation main themes were inpatient chart and discharge letter design and discharge communication process with issues of illegible and inaccurate information. Improved safety was anticipated after implementation. Post-implementation themes were improved inpatient chart clarity and discharge letter quality. TDF domains relevant to staff behavioural determinants preimplementation were knowledge (task or environment); skills (competence); social/professional roles and identity; beliefs about capabilities; environmental context and resources (including incidents). An additional two were relevant post-implementation: social influences and behavioural regulation (including self-monitoring). Participants described challenges and patient safety concerns pre-implementation which were mostly resolved post-implementation. Conclusion HEPMA implementation produced perceptions of patient safety improvement. TDF use enabled behaviour change analysis due to implementation, for example, staff adoption of behaviours to ensure general practitioners receive good quality discharge information.

Validation environment for AIPS/ALS: Implementation and results

NASA Technical Reports Server (NTRS)

Segall, Zary; Siewiorek, Daniel; Caplan, Eddie; Chung, Alan; Czeck, Edward; Vrsalovic, Dalibor

1990-01-01

The work is presented which was performed in porting the Fault Injection-based Automated Testing (FIAT) and Programming and Instrumentation Environments (PIE) validation tools, to the Advanced Information Processing System (AIPS) in the context of the Ada Language System (ALS) application, as well as an initial fault free validation of the available AIPS system. The PIE components implemented on AIPS provide the monitoring mechanisms required for validation. These mechanisms represent a substantial portion of the FIAT system. Moreover, these are required for the implementation of the FIAT environment on AIPS. Using these components, an initial fault free validation of the AIPS system was performed. The implementation is described of the FIAT/PIE system, configured for fault free validation of the AIPS fault tolerant computer system. The PIE components were modified to support the Ada language. A special purpose AIPS/Ada runtime monitoring and data collection was implemented. A number of initial Ada programs running on the PIE/AIPS system were implemented. The instrumentation of the Ada programs was accomplished automatically inside the PIE programming environment. PIE's on-line graphical views show vividly and accurately the performance characteristics of Ada programs, AIPS kernel and the application's interaction with the AIPS kernel. The data collection mechanisms were written in a high level language, Ada, and provide a high degree of flexibility for implementation under various system conditions.

User Perceptions of the Implementation of an Electronic Medication Management System in a Paediatric Setting.

PubMed

Hardie, Rae-Anne; Baysari, Melissa T; Lake, Rebecca; Richardson, Lauren; McCullagh, Cheryl; Westbrook, Johanna I

2017-01-01

The roll-out of a hospital-wide electronic medication management system (eMMS) is a challenging task, requiring planning, coordination, communication and change management. This research aimed to explore the views of doctors and nurses about the strategy used to implement an eMM system in a paediatric hospital. Semi-structured interviews were performed during the first week of the implementation on each ward, and were then followed up three and six weeks post implementation. In total, 90 users (60 nurses and 30 doctors) were asked about their impressions of the implementation, as well as their perceptions of training and IT support. Qualitative thematic analysis was performed by three researchers. Most users perceived the implementation of the eMM to be positive overall. Although perceptions of the implementation process remained largely consistent across the six weeks, users identified several areas where improvements were needed, especially early in implementation, including resources, planning, roll-out strategy and training. These findings are useful for future implementations of eMM systems in paediatric hospitals.

PyGirl: Generating Whole-System VMs from High-Level Prototypes Using PyPy

NASA Astrophysics Data System (ADS)

Bruni, Camillo; Verwaest, Toon

Virtual machines (VMs) emulating hardware devices are generally implemented in low-level languages for performance reasons. This results in unmaintainable systems that are difficult to understand. In this paper we report on our experience using the PyPy toolchain to improve the portability and reduce the complexity of whole-system VM implementations. As a case study we implement a VM prototype for a Nintendo Game Boy, called PyGirl, in which the high-level model is separated from low-level VM implementation issues. We shed light on the process of refactoring from a low-level VM implementation in Java to a high-level model in RPython. We show that our whole-system VM written with PyPy is significantly less complex than standard implementations, without substantial loss in performance.

Design and implementation of web service-based mobile reply testing management system

NASA Astrophysics Data System (ADS)

Gao, Liang; Han, Yu-min

2013-03-01

This paper introduces the design and implementation of a reply testing management system that based-on C#, Web Service and ASP .Net. With the system, teachers can manage reply site through Windows Mobile, judges can grade onscene by visiting WAP site through GPRS. Then this paper discusses details of the implementation and key technologies of the system.

Self-conscious robotic system design process--from analysis to implementation.

PubMed

Chella, Antonio; Cossentino, Massimo; Seidita, Valeria

2011-01-01

Developing robotic systems endowed with self-conscious capabilities means realizing complex sub-systems needing ad-hoc software engineering techniques for their modelling, analysis and implementation. In this chapter the whole process (from analysis to implementation) to model the development of self-conscious robotic systems is presented and the new created design process, PASSIC, supporting each part of it, is fully illustrated.

Social challenges when implementing information systems in everyday work in a nursing context.

PubMed

Nilsson, Lina; Eriksén, Sara; Borg, Christel

2014-09-01

Implementation of information systems in healthcare has become a lengthy process where healthcare staff (eg, nurses) are expected to put information into systems without getting the overall picture of the potential usefulness for their own work. The aim of this study was to explore social challenges when implementing information systems in everyday work in a nursing context. Moreover, this study aimed at putting perceived social challenges in a theoretical framework to address them more constructively when implementing information systems in healthcare. Influenced by institutional ethnography, the findings are based on interviews, observations, and written reflections. Power (changing the existing hierarchy, alienation), professional identity (calling on hold, expert becomes novice, changed routines), and encounter (ignorant introductions, preconceived notions) were categories (subcategories) presented in the findings. Social Cognitive Theory, Diffusion of Innovations, organizational culture, and dramaturgical analysis are proposed to set up a theoretical framework. If social challenges are not considered and addressed in the implementation process, it will be affected by nurses' solidarity to existing power structures and their own professional identity. Thus, implementation of information systems affects more aspects in the organization than might have been intended. These aspects need to be taken in to account in the implementation process.

Implementing Innovation: An Exploration of a Learning Management System Transition

ERIC Educational Resources Information Center

Strawser, Michael G.; Apostel, Shawn; O' Keefe, Moira; Simons, Crystal

2018-01-01

Learning management systems (LMS) are fixtures on higher education campuses. As LMS use continues to increase, faculty development professionals should consider how system use is encouraged and implemented on campus, especially amongst faculty. Using Ely's (1990) technology-specific conditions that facilitate the implementation of an innovation,…

76 FR 81911 - National Advisory Committee for Implementation of the National Forest System Land Management...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-29

... National Forest System Land Management Planning Rule AGENCY: USDA Forest Service. ACTION: Notice of intent... intends to establish the National Advisory Committee for Implementation of the National Forest System Land... (FACA), the Committee is being established to provide advice and recommendations on the implementation...

78 FR 34034 - National Advisory Committee for Implementation of the National Forest System Land Management...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-06

... National Forest System Land Management Planning Rule AGENCY: Forest Service, USDA. ACTION: Notice of meeting. SUMMARY: The National Advisory Committee for Implementation of the National Forest System Land... purpose of the Committee is to provide advice and recommendations on the implementation of the National...

Reflexive reasoning for distributed real-time systems

NASA Technical Reports Server (NTRS)

Goldstein, David

1994-01-01

This paper discusses the implementation and use of reflexive reasoning in real-time, distributed knowledge-based applications. Recently there has been a great deal of interest in agent-oriented systems. Implementing such systems implies a mechanism for sharing knowledge, goals and other state information among the agents. Our techniques facilitate an agent examining both state information about other agents and the parameters of the knowledge-based system shell implementing its reasoning algorithms. The shell implementing the reasoning is the Distributed Artificial Intelligence Toolkit, which is a derivative of CLIPS.

Reaching out to clinicians: implementation of a computerized alert system.

PubMed

Degnan, Dan; Merryfield, Dave; Hultgren, Steve

2004-01-01

Several published articles have identified that providing automated, computer-generated clinical alerts about potentially critical clinical situations should result in better quality of care. In 1999, the pharmacy department at a community hospital network implemented and refined a commercially available, computerized clinical alert system. This case report discusses the implementation process, gives examples of how the system is used, and describes results following implementation. The use of the clinical alert system in this hospital network resulted in improved patient safety as well as in greater efficiency and decreased costs.

An implementation of the programming structural synthesis system (PROSSS)

NASA Technical Reports Server (NTRS)

Rogers, J. L., Jr.; Sobieszczanski-Sobieski, J.; Bhat, R. B.

1981-01-01

A particular implementation of the programming structural synthesis system (PROSSS) is described. This software system combines a state of the art optimization program, a production level structural analysis program, and user supplied, problem dependent interface programs. These programs are combined using standard command language features existing in modern computer operating systems. PROSSS is explained in general with respect to this implementation along with the steps for the preparation of the programs and input data. Each component of the system is described in detail with annotated listings for clarification. The components include options, procedures, programs and subroutines, and data files as they pertain to this implementation. An example exercising each option in this implementation to allow the user to anticipate the type of results that might be expected is presented.

Large-Scale Linear Optimization through Machine Learning: From Theory to Practical System Design and Implementation

DTIC Science & Technology

2016-08-10

AFRL-AFOSR-JP-TR-2016-0073 Large-scale Linear Optimization through Machine Learning: From Theory to Practical System Design and Implementation ...2016 4.  TITLE AND SUBTITLE Large-scale Linear Optimization through Machine Learning: From Theory to Practical System Design and Implementation 5a...performances on various machine learning tasks and it naturally lends itself to fast parallel implementations . Despite this, very little work has been

Operation management system evaluation in the central Finland health care district - end users' view of system implementation.

PubMed

Lemmetty, Kaisa; Häyrinen, Eija

2005-01-01

In this paper we evaluate the implementation of the operation management system in the Central Finland Health Care District. The implementation of the operation management system changed the practice of operation management for the surgical clinic and concerned 500 personnel in total. A survey was carried out to investigate the end users' views on the system's usefulness, usability and the training and user support provided. The users' possibilities to accomplish their tasks and the kind of obstacles they face in operation management were explored. The assessment revealed that more end support is needed after the system implementation, even though a generally positive attitude towards the system was manifested among the staff.

Technical experiences of implementing a wireless tracking and facial biometric verification system for a clinical environment

NASA Astrophysics Data System (ADS)

Liu, Brent; Lee, Jasper; Documet, Jorge; Guo, Bing; King, Nelson; Huang, H. K.

2006-03-01

By implementing a tracking and verification system, clinical facilities can effectively monitor workflow and heighten information security in today's growing demand towards digital imaging informatics. This paper presents the technical design and implementation experiences encountered during the development of a Location Tracking and Verification System (LTVS) for a clinical environment. LTVS integrates facial biometrics with wireless tracking so that administrators can manage and monitor patient and staff through a web-based application. Implementation challenges fall into three main areas: 1) Development and Integration, 2) Calibration and Optimization of Wi-Fi Tracking System, and 3) Clinical Implementation. An initial prototype LTVS has been implemented within USC's Healthcare Consultation Center II Outpatient Facility, which currently has a fully digital imaging department environment with integrated HIS/RIS/PACS/VR (Voice Recognition).

Implementation of the fugitive emissions system program: The OxyChem experience

DOE Office of Scientific and Technical Information (OSTI.GOV)

Deshmukh, A.

An overview is provided for the Fugitive Emissions System (FES) that has been implemented at Occidental Chemical in conjunction with the computer-based maintenance system called PassPort{reg_sign} developed by Indus Corporation. The goal of PassPort{reg_sign} FES program has been to interface with facilities data, equipment information, work standards and work orders. Along the way, several implementation hurdles had to be overcome before a monitoring and regulatory system could be standardized for the appropriate maintenance, process and environmental groups. This presentation includes step-by-step account of several case studies that developed during the implementation of the FES system.

Experiences from the implementation of a biosafety system in Slovenia.

PubMed

Milavec, Mojca; Racman, Darja Stanic

2007-09-01

The development and implementation of an effective national biosafety system is important for several key reasons: to ensure safe access to products of modern biotechnology, to build public confidence, to encourage the growth of domestic modern biotechnology, and to comply with international standards and agreements. There is no single best approach in the development and implementation of a national biosafety system and each country is faced with unique challenges. Slovenia is a small country and a new EU Member State. However, it has developed and implemented an efficient national biosafety system. The key elements of this system are administrative procedure, risk assessment, enforcement, and public participation and information.

Using an Evidence-Based Approach to EMR Implementation to Optimize Outcomes and Avoid Unintended Consequences

PubMed Central

Longhurst, Christopher A.; Palma, Jonathan P.; Grisim, Lisa M.; Widen, Eric; Chan, Melanie; Sharek, Paul J.

2013-01-01

Implementation of an electronic medical record (EMR) with computerized physician order entry (CPOE) can provide an important foundation for preventing harm and improving outcomes. Incentivized by the recent economic stimulus initiative, healthcare systems are implementing vendor-based EMR systems at an unprecedented rate. Accumulating evidence suggests that local implementation decisions, rather than the specific EMR product or technology selected, are the primary drivers of the quality improvement performance of these systems. However, limited attention has been paid to effective approaches to EMR implementation. In this case report, we outline the evidence-based approach we used to make EMR implementation decisions in a pragmatic structure intended for replication at other sites. PMID:24771994

Standardizing an approach to the evaluation of implementation science proposals.

PubMed

Crable, Erika L; Biancarelli, Dea; Walkey, Allan J; Allen, Caitlin G; Proctor, Enola K; Drainoni, Mari-Lynn

2018-05-29

The fields of implementation and improvement sciences have experienced rapid growth in recent years. However, research that seeks to inform health care change may have difficulty translating core components of implementation and improvement sciences within the traditional paradigms used to evaluate efficacy and effectiveness research. A review of implementation and improvement sciences grant proposals within an academic medical center using a traditional National Institutes of Health framework highlighted the need for tools that could assist investigators and reviewers in describing and evaluating proposed implementation and improvement sciences research. We operationalized existing recommendations for writing implementation science proposals as the ImplemeNtation and Improvement Science Proposals Evaluation CriTeria (INSPECT) scoring system. The resulting system was applied to pilot grants submitted to a call for implementation and improvement science proposals at an academic medical center. We evaluated the reliability of the INSPECT system using Krippendorff's alpha coefficients and explored the utility of the INSPECT system to characterize common deficiencies in implementation research proposals. We scored 30 research proposals using the INSPECT system. Proposals received a median cumulative score of 7 out of a possible score of 30. Across individual elements of INSPECT, proposals scored highest for criteria rating evidence of a care or quality gap. Proposals generally performed poorly on all other criteria. Most proposals received scores of 0 for criteria identifying an evidence-based practice or treatment (50%), conceptual model and theoretical justification (70%), setting's readiness to adopt new services/treatment/programs (54%), implementation strategy/process (67%), and measurement and analysis (70%). Inter-coder reliability testing showed excellent reliability (Krippendorff's alpha coefficient 0.88) for the application of the scoring system overall and demonstrated reliability scores ranging from 0.77 to 0.99 for individual elements. The INSPECT scoring system presents a new scoring criteria with a high degree of inter-rater reliability and utility for evaluating the quality of implementation and improvement sciences grant proposals.

Early Warning System Implementation Guide: For Use with the National High School Center's Early Warning System Tool v2.0

ERIC Educational Resources Information Center

Therriault, Susan Bowles; Heppen, Jessica; O'Cummings, Mindee; Fryer, Lindsay; Johnson, Amy

2010-01-01

This Early Warning System (EWS) Implementation Guide is a supporting document for schools and districts that are implementing the National High School Center's Early Warning System (EWS) Tool v2.0. Developed by the National High School Center at the American Institutes for Research (AIR), the guide and tool support the establishment and…

Beyond the Pink Sand: Case Studies of Experiences of Multi-Tier System of Supports Implementation in the Bermuda Public School System

ERIC Educational Resources Information Center

Francis-Thompson, Nyshawana

2017-01-01

This qualitative study examined how Multi-tier System of Supports (MTSS), a systematic approach to providing academic and behavioral supports to students, was implemented and experienced by macro and micro levels of educators in the Bermuda Public School system. I asked three research questions regarding: (a) how MTSS was being implemented in the…

Integration of Interactive Interfaces with Intelligent Tutoring Systems: An Implementation

DTIC Science & Technology

1993-09-01

Intelligent Tutoring Systems: At the crossroad of artifcial intelligence and education. Ablex Publishing Corp., Norwood, NJ. 6. Goldstein, 1. L. (1986...AD-A273 869 IImhlllII Integration of Interactive Interfaces with Intelligent Thtoring Systems: An Implementation Vijay Vasandani and T. Govindaraj...NUMBERS Integration of Interactive Interfaces with Intelligent Tutoring Systems: An Implementation C: N00014-87-K-0482 .ALITHOR(S) PE: 0602233N Vijay

"If donors woke up tomorrow and said we can't fund you, what would we do?" A health system dynamics analysis of implementation of PMTCT option B+ in Uganda.

PubMed

Doherty, Tanya; Besada, Donnela; Goga, Ameena; Daviaud, Emmanuelle; Rohde, Sarah; Raphaely, Nika

2017-07-26

In October 2012 Uganda extended its prevention of mother to child HIV transmission (PMTCT) policy to Option B+, providing lifelong antiretroviral treatment for HIV positive pregnant and breastfeeding women. The rapid changes and adoptions of new PMTCT policies have not been accompanied by health systems research to explore health system preparedness to implement such programmes. The implementation of Option B+ provides many lessons which can inform the shift to 'Universal Test and Treat', a policy which many sub-Saharan African countries are preparing to adopt, despite fragile health systems. This qualitative study of PMTCT Option B+ implementation in Uganda three years following the policy adoption, uses the health system dynamics framework to explore the impacts of this programme on ten elements of the health system. Qualitative data were gathered through rapid appraisal during in-country field work. Key informant interviews and focus group discussions (FGDs) were undertaken with the Ministry of Health, implementing partners, multilateral agencies, district management teams, facility-based health workers and community cadres. A total of 82 individual interviews and 16 focus group discussions were completed. We conducted a simple manifest analysis, using the ten elements of a health system for grouping data into categories and themes. Of the ten elements in the health system dynamics framework, context and resources (finances, infrastructure & supplies, and human resources) were the most influential in the implementation of Option B+ in Uganda. Support from international actors and implementing partners attempted to strengthen resources at district level, but had unintended consequences of creating dependence and uncertainty regarding sustainability. The health system dynamics framework offers a novel approach to analysis of the effects of implementation of a new policy on critical elements of the health system. Its emphasis on relationships between system elements, population and context is helpful in unpacking impacts of and reactions to pressures on the system, which adds value beyond some previous frameworks.

Multi-Tiered System of Supports (MTSS) and Implementation Science

ERIC Educational Resources Information Center

Dillard, Christina

2017-01-01

Many districts and schools are having difficulty implementing Multi-Tiered System of Supports (MTSS) in school settings. This quantitative study set out to examine the stage of MTSS implementation schools are at and identify factors from the implementation science framework that account for the different reported student outcomes related to MTSS…

Library Specifications for a New Circulation System for Concordia University Libraries.

ERIC Educational Resources Information Center

Tallon, James

This study of library requirements for a new circulation system is organized into three sections: (1) items required for initial implementation in July 1982; (2) items relating to notice generation and activity statistics, with implementation expected by fall 1982; and (3) items provided in the system as initially implemented, with additional…

University ERP Implementation in Germany: Qualitative Exploratory Case Study of Administrative Staff Experiences

ERIC Educational Resources Information Center

Thelen, Anja

2015-01-01

Enterprise Resource Planning (ERP) implementations are expensive, time-consuming, and often do not lead to the expected outcome of integrated IT systems. Many German universities are implementing ERP systems as Campus Management Systems (CMS) and a solution to any problem, need, or requirement the organization has. This exploratory case study…

Assessing Student Threats: A Handbook for Implementing the Salem-Keizer System

ERIC Educational Resources Information Center

Van Dreal, John

2011-01-01

"Assessing Student Threats: A Handbook for Implementing the Salem-Keizer System" is a manual for the implementation of a threat assessment system that follows the recommendations of the Safe Schools Initiative and the prescriptive outline provided by the FBI. Written from an educator's perspective with contributing authors from law…

Implementation of the Air Program Information Management System (APIMS) Inspection Module

DTIC Science & Technology

2009-05-01

7 5 T H A I R B A S E W I N G Implementation of the Air Program Information Management System (APIMS) Inspection Module 2009 Environment...Implementation of the Air Program Information Management System (APIMS) Inspection Module 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER

Development of an intelligent diagnostic system for reusable rocket engine control

NASA Technical Reports Server (NTRS)

Anex, R. P.; Russell, J. R.; Guo, T.-H.

1991-01-01

A description of an intelligent diagnostic system for the Space Shuttle Main Engines (SSME) is presented. This system is suitable for incorporation in an intelligent controller which implements accommodating closed-loop control to extend engine life and maximize available performance. The diagnostic system architecture is a modular, hierarchical, blackboard system which is particularly well suited for real-time implementation of a system which must be repeatedly updated and extended. The diagnostic problem is formulated as a hierarchical classification problem in which the failure hypotheses are represented in terms of predefined data patterns. The diagnostic expert system incorporates techniques for priority-based diagnostics, the combination of analytical and heuristic knowledge for diagnosis, integration of different AI systems, and the implementation of hierarchical distributed systems. A prototype reusable rocket engine diagnostic system (ReREDS) has been implemented. The prototype user interface and diagnostic performance using SSME test data are described.

Implementing a Measurement Feedback System in Community Mental Health Clinics: A Case Study of Multilevel Barriers and Facilitators

PubMed Central

Gleacher, Alissa A.; Olin, Serene S.; Nadeem, Erum; Pollock, Michele; Ringle, Vanesa; Bickman, Leonard; Douglas, Susan; Hoagwood, Kimberly

2015-01-01

Measurement feedback systems (MFSs) have been proposed as a means of improving practice. The present study examined the implementation of a MFS, the Contextualized Feedback System (CFS), in two community-based clinic sites. Significant implementation differences across sites provided a basis for examining factors that influenced clinician uptake of CFS. Following the theoretical implementation framework of Aarons, Hurlburt & Horwitz (2011), we coded qualitative data collected from eighteen clinicians (13 from Clinic U and 5 from Clinic R) who participated in semi-structured interviews about their experience with CFS implementation. Results suggest that clinicians at both clinics perceived more barriers than facilitators to CFS implementation. Interestingly, clinicians at the higher implementing clinic reported a higher proportion of barriers to facilitators (3:1 vs. 2:1); however, these clinicians also reported a significantly higher level of organizational and leadership supports for CFS implementation. Implications of these findings are discussed. PMID:25735619

System-wide lean implementation in health care: A multiple case study.

PubMed

Centauri, Federica; Mazzocato, Pamela; Villa, Stefano; Marsilio, Marta

2018-05-01

Background Lean practices have been widely used by health care organizations to meet efficiency, performance and quality improvement needs. The lean health care literature shows that the effective implementation of lean requires a holistic system-wide approach. However, there is still limited evidence on what drives effective system-wide lean implementation in health care. The existing literature suggests that a deeper understanding of how lean interventions interact with the organizational context is necessary to identify the critical variables to successfully sustain system-wide lean strategies. Purpose and methodology: A multiple case study of three Italian hospitals is conducted with the aim to explore the organizational conditions that are relevant for an effective system-wide lean implementation. A conceptual framework, built on socio-technical system schemas, is used to guide data collection and analysis. The analysis points out the importance to support lean implementation with an integrated and coordinated strategy involving the social, technical, and external components of the overall hospital system.

Care provider order entry (CPOE): a perspective on factors leading to success or to failure.

PubMed

Ozdas, A; Miller, R A

2007-01-01

Authors provide a perspective on factors leading to successful care provider order entry (CPOE) implementations. Viewpoint of authors supported by background literature review. Authors review both benefits and challenges related to CPOE implementation using three guiding principles: (1) a clinical approach to clinical systems, which claims that CPOE implementation is analogous to a "good" clinician delivering care to a patient; (2) a commitment to quality, which advocates that no compromises should be made in implementing system functionality and clinical system content - the highest objective for CPOE implementation is to provide better quality of care and increased safety for patients; (3) a commitment to fairness, as evidenced by respect for individuals and support of local autonomy, which advocates for minimizing disruptions to clinician-users' workflows, and adequate local control over CPOE system design and evolution, including clinical content management. Past experiences with CPOE implementation can inform future installation attempts. Sociocultural factors dominate in determining the success of implementation, and should govern technical factors.

Evidence-based protocol for structural rehabilitation of the spine and posture: review of clinical biomechanics of posture (CBP®) publications

PubMed Central

Oakley, Paul A.; Harrison, Donald D.; Harrison, Deed E.; Haas, Jason W.

2005-01-01

BACKGROUND Although practice protocols exist for SMT and functional rehabilitation, no practice protocols exist for structural rehabilitation. Traditional chiropractic practice guidelines have been limited to acute and chronic pain treatment, with limited inclusion of functional and exclusion of structural rehabilitation procedures. OBJECTIVE (1) To derive an evidence-based practice protocol for structural rehabilitation from publications on Clinical Biomechanics of Posture (CBP®) methods, and (2) to compare the evidence for Diversified, SMT, and CBP®. METHODS Clinical control trials utilizing CBP® methods and spinal manipulative therapy (SMT) were obtained from searches in Mantis, CINAHL, and Index Medicus. Using data from SMT review articles, evidence for Diversified Technique (as taught in chiropractic colleges), SMT, and CBP® were rated and compared. RESULTS From the evidence from Clinical Control Trials on SMT and CBP®, there is very little evidence support for Diversified (our rating = 18), as taught in chiropractic colleges, for the treatment of pain subjects, while CBP® (our rating = 46) and SMT for neck pain (rating = 58) and low back pain (our rating = 202) have evidence-based support. CONCLUSIONS While CBP® Technique has approximately as much evidence-based support as SMT for neck pain, CBP® has more evidence to support its methods than the Diversified technique taught in chiropractic colleges, but not as much as SMT for low back pain. The evolution of chiropractic specialization has occurred, and doctors providing structural-based chiropractic care require protocol guidelines for patient quality assurance and standardization. A structural rehabilitation protocol was developed based on evidence from CBP® publications. PMID:17549209

Maternal androgen excess and obesity induce sexually dimorphic anxiety-like behavior in the offspring.

PubMed

Manti, Maria; Fornes, Romina; Qi, Xiaojuan; Folmerz, Elin; Lindén Hirschberg, Angelica; de Castro Barbosa, Thais; Maliqueo, Manuel; Benrick, Anna; Stener-Victorin, Elisabet

2018-03-22

Maternal polycystic ovary syndrome (PCOS), a condition associated with hyperandrogenism, is suggested to increase anxiety-like behavior in the offspring. Because PCOS is closely linked to obesity, we investigated the impact of an adverse hormonal or metabolic maternal environment and offspring obesity on anxiety in the offspring. The obese PCOS phenotype was induced by chronic high-fat-high-sucrose (HFHS) consumption together with prenatal dihydrotestosterone exposure in mouse dams. Anxiety-like behavior was assessed in adult offspring with the elevated-plus maze and open-field tests. The influence of maternal androgens and maternal and offspring diet on genes implicated in anxiety were analyzed in the amygdala and hypothalamus with real-time PCR ( n = 47). Independent of diet, female offspring exposed to maternal androgens were more anxious and displayed up-regulation of adrenoceptor α 1B in the amygdala and up-regulation of hypothalamic corticotropin-releasing hormone ( Crh). By contrast, male offspring exposed to a HFHS maternal diet had increased anxiety-like behavior and showed up-regulation of epigenetic markers in the amygdala and up-regulation of hypothalamic Crh. Overall, there were substantial sex differences in gene expression in the brain. These findings provide novel insight into how maternal androgens and obesity exert sex-specific effects on behavior and gene expression in the offspring of a PCOS mouse model.-Manti, M., Fornes, R., Qi, X., Folmerz, E., Lindén Hirschberg, A., de Castro Barbosa, T., Maliqueo, M., Benrick, A., Stener-Victorin, E. Maternal androgen excess and obesity induce sexually dimorphic anxiety-like behavior in the offspring.

Quantifying the high-velocity, low-amplitude spinal manipulative thrust: a systematic review.

PubMed

Downie, Aron S; Vemulpad, Subramanyam; Bull, Peter W

2010-09-01

The purpose of this study was to systematically review studies that quantify the high-velocity, low-amplitude (HVLA) spinal thrust, to qualitatively compare the apparatus used and the force-time profiles generated, and to critically appraise studies involving the quantification of thrust as an augmented feedback tool in psychomotor learning. A search of the literature was conducted to identify the sources that reported quantification of the HVLA spinal thrust. MEDLINE-OVID (1966-present), MANTIS-OVID (1950-present), and CINAHL-EBSCO host (1981-present) were searched. Eligibility criteria included that thrust subjects were human, animal, or manikin and that the thrust type was a hand-delivered HVLA spinal thrust. Data recorded were single force, force-time, or displacement-time histories. Publications were in English language and after 1980. The relatively small number of studies, combined with the diversity of method and data interpretation, did not enable meta-analysis. Twenty-seven studies met eligibility criteria: 17 studies measured thrust as a primary outcome (13 human, 2 cadaver, and 2 porcine). Ten studies demonstrated changes in psychomotor learning related to quantified thrust data on human, manikin, or other device. Quantifiable parameters of the HVLA spinal thrust exist and have been described. There remain a number of variables in recording that prevent a standardized kinematic description of HVLA spinal manipulative therapy. Despite differences in data between studies, a relationship between preload, peak force, and thrust duration was evident. Psychomotor learning outcomes were enhanced by the application of thrust data as an augmented feedback tool. Copyright © 2010 National University of Health Sciences. Published by Mosby, Inc. All rights reserved.

Mitochondrial genomes suggest that hexapods and crustaceans are mutually paraphyletic

PubMed Central

Cook, Charles E; Yue, Qiaoyun; Akam, Michael

2005-01-01

For over a century the relationships between the four major groups of the phylum Arthropoda (Chelicerata, Crustacea, Hexapoda and Myriapoda) have been debated. Recent molecular evidence has confirmed a close relationship between the Crustacea and the Hexapoda, and has included the suggestion of a paraphyletic Hexapoda. To test this hypothesis we have sequenced the complete or near-complete mitochondrial genomes of three crustaceans (Parhyale hawaiensis, Squilla mantis and Triops longicaudatus), two collembolans (Onychiurus orientalis and Podura aquatica) and the insect Thermobia domestica. We observed rearrangement of transfer RNA genes only in O. orientalis, P. aquatica and P. hawaiensis. Of these, only the rearrangement in O. orientalis, an apparent autapomorphy for the collembolan family Onychiuridae, was phylogenetically informative. We aligned the nuclear and amino acid sequences from the mitochondrial protein-encoding genes of these taxa with their homologues from other arthropod taxa for phylogenetic analysis. Our dataset contains many more Crustacea than previous molecular phylogenetic analyses of the arthropods. Neighbour-joining, maximum-likelihood and Bayesian posterior probabilities all suggest that crustaceans and hexapods are mutually paraphyletic. A crustacean clade of Malacostraca and Branchiopoda emerges as sister to the Insecta sensu stricto and the Collembola group with the maxillopod crustaceans. Some, but not all, analyses strongly support this mutual paraphyly but statistical tests do not reject the null hypotheses of a monophyletic Hexapoda or a monophyletic Crustacea. The dual monophyly of the Hexapoda and Crustacea has rarely been questioned in recent years but the idea of both groups' paraphyly dates back to the nineteenth century. We suggest that the mutual paraphyly of both groups should seriously be considered. PMID:16024395

Feeding ecology of elasmobranch fishes in coastal waters of the Colombian Eastern Tropical Pacific

PubMed Central

Navia, Andrés F; Mejía-Falla, Paola A; Giraldo, Alan

2007-01-01

Background Stomach contents of 131 specimens of five elasmobranch species (Mustelus lunulatus, Dasyatis longa, Rhinobatos leucorhynchus, Raja velezi and Zapteryx xyster) caught in the central fishing zone in the Pacific Ocean of Colombia were counted and weighed to describe feeding habits and dietary overlaps. Results Twenty-one prey items belonging to four major groups (stomatopods, decapods, mollusks and fish) were identified. Decapod crustaceans were the most abundant prey found in stomachs. The mantis shrimp Squilla panamensis was the main prey item in the diet of M. lunulatus; tiger shrimp Trachypenaeus sp. was the main prey item in the diet of Rhinobatos leucorhynchus and Raja velezi, and Penaeidae shrimp were the main prey items in the diet of Z. xyster. Furthermore, fish were important in the diet of Raja velezi, Z. xyster and D. longa. The greatest diet breadth corresponded to Z. xyster whereas M. lunulatus was the most specialized predator. Finally, four significant diet overlaps between the five species were found, attributable mainly to Squillidae, Penaeidae and Fish. Conclusion Shrimps (Penaeidae and stomatopods) and benthic fishes were the most important food types in the diet of the elasmobranch species studied. Diet breadth and overlap were relatively low. Determination of food resource partitioning among the batoid species studied was not possible. However, we identified partitions in other niche axes (time of feeding activity and habitat utilization). It is possible to assume that diffuse competition could be exceeding the biunivocal competition among the studied species. Therefore, this assemblage would have a strong tendency to trophic guild formation. PMID:17877796

Reliability of bony anatomic landmark asymmetry assessment in the lumbopelvic region: application to osteopathic medical education.

PubMed

Stovall, Bradley A; Kumar, Shrawan

2010-11-01

The objective of this review is to establish the current state of knowledge on the reliability of clinical assessment of asymmetry in the lumbar spine and pelvis. To search the literature, the authors consulted the databases of MEDLINE, CINAHL, AMED, MANTIS, Academic Search Complete, and Web of Knowledge using different combinations of the following keywords: palpation, asymmetry, inter or intraexaminer reliability, tissue texture, assessment, and anatomic landmark. Of the 23 studies identified, 14 did not meet the inclusion criteria and were excluded. The quality and methods of studies investigating the reliability of bony anatomic landmark asymmetry assessment are variable. The κ statistic ranges without training for interexaminer reliability were as follows: anterior superior iliac spine (ASIS), -0.01 to 0.19; posterior superior iliac spine (PSIS), 0.04 to 0.15; inferior lateral angle, transverse plane (ILA-A/P), -0.03 to 0.11; inferior lateral angles, coronal plane (ILA-S/I), -0.01 to 0.08; sacral sulcus (SS), -0.4 to 0.37; lumbar spine transverse processes L1 through L5, 0.04 to 0.17. The corresponding ranges for intraexaminer reliability were higher for all associated landmarks: ASIS, 0.19 to 0.4; PSIS, 0.13 to 0.49; ILA-A/P, 0.1 to 0.2; ILA-S/I, 0.03 to 0.21; SS, 0.24 to 0.28; lumbar spine transverse processes L1 through L5, not applicable. Further research is needed to better understand the reliability of asymmetry assessment methods in manipulative medicine.

Reliability of Bony Anatomic Landmark Asymmetry Assessment in the Lumbopelvic Region: Application to Osteopathic Medical Education

PubMed Central

Stovall, Bradley A.; Kumar, Shrawan

2011-01-01

The objective of this review is to establish the current state of knowledge on the reliability of clinical assessment of asymmetry in the lumbar spine and pelvis. To search the literature, the authors consulted the databases of MEDLINE, CINAHL, AMED, MANTIS, Academic Search Complete, and Web of Knowledge using different combinations of the following keywords: palpation, asymmetry, inter- or intraex-aminer reliability, tissue texture, assessment, and anatomic landmark. Of the 23 studies identified, 14 did not meet the inclusion criteria and were excluded. The quality and methods of studies investigating the reliability of bony anatomic landmark asymmetry assessment are variable. The κ statistic ranges without training for interexaminer reliability were as follows: anterior superior iliac spine (ASIS), −0.01 to 0.19; posterior superior iliac spine (PSIS), 0.04 to 0.15; inferior lateral angle, transverse plane (ILA-A/P), −0.03 to 0.11; inferior lateral angles, coronal plane (ILA-S/I), −0.01 to 0.08; sacral sulcus (SS), −0.4 to 0.37; lumbar spine transverse processes L1 through L5, 0.04 to 0.17. The corresponding ranges for intraexaminer reliability were higher for all associated landmarks: ASIS, 0.19 to 0.4; PSIS, 0.13 to 0.49; ILA-A/P, 0.1 to 0.2; ILA-S/I, 0.03 to 0.21; SS, 0.24 to 0.28; lumbar spine transverse processes L1 through L5, not applicable. Further research is needed to better understand the reliability of asymmetry assessment methods in manipulative medicine. PMID:21135198

Activity-based costing for pathology examinations and comparison with the current pricing system in Turkey.

PubMed

Ergün, Ferda A K; Ağirbaş, Ismail; Kuzu, Işınsu

2013-01-01

To demonstrate the real cost data of the pathology examinations by using the activity-based costing method and to contribute to the financial planning of the departments, health managers and also the social security institution. Forty-four examinations selected from the Healthcare Implementation Notification system list and performed at the Ankara University Faculty of Medicine Pathology Department during September 2010 were studied. The analysis and the real cost calculations were done according to the duration of the procedures. Calculated costs were compared with the Healthcare Implementation Notification system and Medicare price lists. The costs of the pathology tests listed within the same pricing levels in the Healthcare Implementation Notification system list showed great differences. The minimum and maximum costs in level 1, 2, 3, and 4 were 15,98-80,15 TL, 15,95-258,59 TL, 42,38- 236,87 TL, and 124,42-406,76 TL, respectively. Medicare price levels were more consistent with the real costs of the examinations compared to the Healthcare Implementation Notification system price list. The prices of the pathology examination listed at different levels in the Healthcare Implementation Notification system lists do not cover the real costs of the work done. The principal parameters of Activity-Based Costing system are more suitable for making the most realistic cost categorization. Although the prices could differ between countries, the Medicare system categories are more realistic than the Healthcare Implementation Notification system. The Healthcare Implementation Notification system list needs to be revised in order to reflect the real costs of the pathology examinations.

A systematic approach to embedded biomedical decision making.

PubMed

Song, Zhe; Ji, Zhongkai; Ma, Jian-Guo; Sputh, Bernhard; Acharya, U Rajendra; Faust, Oliver

2012-11-01

An embedded decision making is a key feature for many biomedical systems. In most cases human life directly depends on correct decisions made by these systems, therefore they have to work reliably. This paper describes how we applied systems engineering principles to design a high performance embedded classification system in a systematic and well structured way. We introduce the structured design approach by discussing requirements capturing, specifications refinement, implementation and testing. Thereby, we follow systems engineering principles and execute each of these processes as formal as possible. The requirements, which motivate the system design, describe an automated decision making system for diagnostic support. These requirements are refined into the implementation of a support vector machine (SVM) algorithm which enables us to integrate automated decision making in embedded systems. With a formal model we establish functionality, stability and reliability of the system. Furthermore, we investigated different parallel processing configurations of this computationally complex algorithm. We found that, by adding SVM processes, an almost linear speedup is possible. Once we established these system properties, we translated the formal model into an implementation. The resulting implementation was tested using XMOS processors with both normal and failure cases, to build up trust in the implementation. Finally, we demonstrated that our parallel implementation achieves the speedup, predicted by the formal model. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

Transportation infrastructure : states' implementation of transportation management systems

DOT National Transportation Integrated Search

1997-01-13

This report focuses on the U.S. General Accounting Office's ISTEA update of the states' implementation of pavement management systems, bridges, highway safety, congestion management systems, public transportation, and intermodal management systems. A...

Practice, science and governance in interaction: European effort for the system-wide implementation of the International Classification of Functioning, Disability and Health (ICF) in Physical and Rehabilitation Medicine.

PubMed

Stucki, Gerold; Zampolini, Mauro; Juocevicius, Alvydas; Negrini, Stefano; Christodoulou, Nicolas

2017-04-01

Since its launch in 2001, relevant international, regional and national PRM bodies have aimed to implement the International Classification of Functioning, Disability and Health (ICF) in Physical and Rehabilitation Medicine (PRM), whereby contributing to the development of suitable practical tools. These tools are available for implementing the ICF in day-to-day clinical practice, standardized reporting of functioning outcomes in quality management and research, and guiding evidence-informed policy. Educational efforts have reinforced PRM physicians' and other rehabilitation professionals' ICF knowledge, and numerous implementation projects have explored how the ICF is applied in clinical practice, research and policy. Largely lacking though is the system-wide implementation of ICF in day-to-day practice across all rehabilitation services of national health systems. In Europe, system-wide implementation of ICF requires the interaction between practice, science and governance. Considering its mandate, the UEMS PRM Section and Board have decided to lead a European effort towards system-wide ICF implementation in PRM, rehabilitation and health care at large, in interaction with governments, non-governmental actors and the private sector, and aligned with ISPRM's collaboration plan with WHO. In this paper we present the current PRM internal and external policy agenda towards system-wide ICF implementation and the corresponding implementation action plan, while highlighting priority action steps - promotion of ICF-based standardized reporting in national quality management and assurance programs, development of unambiguous rehabilitation service descriptions using the International Classification System for Service Organization in Health-related Rehabilitation, development of Clinical Assessment Schedules, qualitative linkage and quantitative mapping of data to the ICF, and the cultural adaptation of the ICF Clinical Data Collection Tool in European languages.

The Pharmacogenomics Research Network Translational Pharmacogenetics Program: Outcomes and Metrics of Pharmacogenetic Implementations Across Diverse Healthcare Systems.

PubMed

Luzum, J A; Pakyz, R E; Elsey, A R; Haidar, C E; Peterson, J F; Whirl-Carrillo, M; Handelman, S K; Palmer, K; Pulley, J M; Beller, M; Schildcrout, J S; Field, J R; Weitzel, K W; Cooper-DeHoff, R M; Cavallari, L H; O'Donnell, P H; Altman, R B; Pereira, N; Ratain, M J; Roden, D M; Embi, P J; Sadee, W; Klein, T E; Johnson, J A; Relling, M V; Wang, L; Weinshilboum, R M; Shuldiner, A R; Freimuth, R R

2017-09-01

Numerous pharmacogenetic clinical guidelines and recommendations have been published, but barriers have hindered the clinical implementation of pharmacogenetics. The Translational Pharmacogenetics Program (TPP) of the National Institutes of Health (NIH) Pharmacogenomics Research Network was established in 2011 to catalog and contribute to the development of pharmacogenetic implementations at eight US healthcare systems, with the goal to disseminate real-world solutions for the barriers to clinical pharmacogenetic implementation. The TPP collected and normalized pharmacogenetic implementation metrics through June 2015, including gene-drug pairs implemented, interpretations of alleles and diplotypes, numbers of tests performed and actionable results, and workflow diagrams. TPP participant institutions developed diverse solutions to overcome many barriers, but the use of Clinical Pharmacogenetics Implementation Consortium (CPIC) guidelines provided some consistency among the institutions. The TPP also collected some pharmacogenetic implementation outcomes (scientific, educational, financial, and informatics), which may inform healthcare systems seeking to implement their own pharmacogenetic testing programs. © 2017, The American Society for Clinical Pharmacology and Therapeutics.

Adopting best practices: "Agility" moves from software development to healthcare project management.

PubMed

Kitzmiller, Rebecca; Hunt, Eleanor; Sproat, Sara Breckenridge

2006-01-01

It is time for a change in mindset in how nurses operationalize system implementations and manage projects. Computers and systems have evolved over time from unwieldy mysterious machines of the past to ubiquitous computer use in every aspect of daily lives and work sites. Yet, disconcertingly, the process used to implement these systems has not evolved. Technology implementation does not need to be a struggle. It is time to adapt traditional plan-driven implementation methods to incorporate agile techniques. Agility is a concept borrowed from software development and is presented here because it encourages flexibility, adaptation, and continuous learning as part of the implementation process. Agility values communication and harnesses change to an advantage, which facilitates the natural evolution of an adaptable implementation process. Specific examples of agility in an implementation are described, and plan-driven implementation stages are adapted to incorporate relevant agile techniques. This comparison demonstrates how an agile approach enhances traditional implementation techniques to meet the demands of today's complex healthcare environments.

Evaluation of the impacts of ITS technologies on the Borman Expressway Network

DOT National Transportation Integrated Search

1998-10-01

The Indiana Department of Transportation (INDOT) is currently implementing (or has implemented) several components of Intelligent Transportation Systems (ITS). This includes a mini Advanced Traffic Management Systems (ATMS) implemented on a three-mil...

The influence of social challenges when implementing information systems in a Swedish health-care organisation.

PubMed

Nilsson, Lina; Eriksén, Sara; Borg, Christel

2016-09-01

To describe and obtain a deeper understanding of social challenges and their influence on the implementation process when implementing Information systems in a Swedish health-care organisation. Despite positive effects when implementing Information systems in health-care organisations, there are difficulties in the implementation process. Nurses' experiences of being neglected have been dismissed as reasons for setbacks in implementation. An Institutional Ethnography design was used. A deductive content analysis was made influenced by empirically identified social challenges of power, professional identity and encounters. An abstraction was made of the analysis. Nineteen nurses at macro, meso and micro levels were interviewed in focus groups. Organisational levels are lost in different ways in how to control the reformation, how to introduce Information systems as reformation strategies and in how to translate new tools and assumptions that do not fit traditional ways of working in shaping professional identities. Different focus may affect the reformation of health-care organisations and implementation and knowledge processes. An implementation climate is needed where the system standards fit the values of the users. Nursing management needs to be visionary, engaged and work with risk factors in order to reform the hierarchical health-care organisation. © 2016 John Wiley & Sons Ltd.

Resonator reset in circuit QED by optimal control for large open quantum systems

NASA Astrophysics Data System (ADS)

Boutin, Samuel; Andersen, Christian Kraglund; Venkatraman, Jayameenakshi; Ferris, Andrew J.; Blais, Alexandre

2017-10-01

We study an implementation of the open GRAPE (gradient ascent pulse engineering) algorithm well suited for large open quantum systems. While typical implementations of optimal control algorithms for open quantum systems rely on explicit matrix exponential calculations, our implementation avoids these operations, leading to a polynomial speedup of the open GRAPE algorithm in cases of interest. This speedup, as well as the reduced memory requirements of our implementation, are illustrated by comparison to a standard implementation of open GRAPE. As a practical example, we apply this open-system optimization method to active reset of a readout resonator in circuit QED. In this problem, the shape of a microwave pulse is optimized such as to empty the cavity from measurement photons as fast as possible. Using our open GRAPE implementation, we obtain pulse shapes, leading to a reset time over 4 times faster than passive reset.

Evaluating the sub-national fidelity of national Initiatives in decentralized health systems: Integrated Primary Health Care Governance in Nigeria.

PubMed

Eboreime, Ejemai Amaize; Abimbola, Seye; Obi, Felix Abrahams; Ebirim, Obinna; Olubajo, Olalekan; Eyles, John; Nxumalo, Nonhlanhla Lynette; Mambulu, Faith Nankasa

2017-03-21

Policy making, translation and implementation in politically and administratively decentralized systems can be challenging. Beyond the mere sub-national acceptance of national initiatives, adherence to policy implementation processes is often poor, particularly in low and middle-income countries. In this study, we explore the implementation fidelity of integrated PHC governance policy in Nigeria's decentralized governance system and its implications on closing implementation gaps with respect to other top-down health policies and initiatives. Having engaged policy makers, we identified 9 core components of the policy (Governance, Legislation, Minimum Service Package, Repositioning, Systems Development, Operational Guidelines, Human Resources, Funding Structure, and Office Establishment). We evaluated the level and pattern of implementation at state level as compared to the national guidelines using a scorecard approach. Contrary to national government's assessment of level of compliance, we found that sub-national governments exercised significant discretion with respect to the implementation of core components of the policy. Whereas 35 and 32% of states fully met national criteria for the structural domains of "Office Establishment" and Legislation" respectively, no state was fully compliant to "Human Resource Management" and "Funding" requirements, which are more indicative of functionality. The pattern of implementation suggests that, rather than implementing to improve outcomes, state governments may be more interested in executing low hanging fruits in order to access national incentives. Our study highlights the importance of evaluating implementation fidelity in providing evidence of implementation gaps towards improving policy execution, particularly in decentralized health systems. This approach will help national policy makers identify more effective ways of supporting lower tiers of governance towards improvement of health systems and outcomes.

An implementation of the distributed programming structural synthesis system (PROSSS)

NASA Technical Reports Server (NTRS)

Rogers, J. L., Jr.

1981-01-01

A method is described for implementing a flexible software system that combines large, complex programs with small, user-supplied, problem-dependent programs and that distributes their execution between a mainframe and a minicomputer. The Programming Structural Synthesis System (PROSSS) was the specific software system considered. The results of such distributed implementation are flexibility of the optimization procedure organization and versatility of the formulation of constraints and design variables.

INCEPTION, DESIGN AND IMPLEMENTATION OF A MANAGEMENT INFORMATION SYSTEM.

DTIC Science & Technology

The purpose of this paper is to develop a uniform systematic approach to the design and implementation of a management information system . In recent...directed towards the design of a management information system . To this end - the creaction of such a document - is this paper dedicated. The...inception to successful implementation of a management information system . Many factors must be considered while applying this procedure, e.g., complexity

Implementing an electronic hand hygiene monitoring system: Lessons learned from community hospitals.

PubMed

Edmisten, Catherine; Hall, Charles; Kernizan, Lorna; Korwek, Kimberly; Preston, Aaron; Rhoades, Evan; Shah, Shalin; Spight, Lori; Stradi, Silvia; Wellman, Sonia; Zygadlo, Scott

2017-08-01

Measuring and providing feedback about hand hygiene (HH) compliance is a complicated process. Electronic HH monitoring systems have been proposed as a possible solution; however, there is little information available about how to successfully implement and maintain these systems for maximum benefit in community hospitals. An electronic HH monitoring system was implemented in 3 community hospitals by teams at each facility with support from the system vendor. Compliance rates were measured by the electronic monitoring system. The implementation challenges, solutions, and drivers of success were monitored within each facility. The electronic HH monitoring systems tracked on average more than 220,000 compliant HH events per facility per month, with an average monthly compliance rate >85%. The sharing of best practices between facilities was valuable in addressing challenges encountered during implementation and maintaining a high rate of use. Drivers of success included a collaborative environment, leadership commitment, using data to drive improvement, consistent and constant messaging, staff empowerment, and patient involvement. Realizing the full benefit of investments in electronic HH monitoring systems requires careful consideration of implementation strategies, planning for ongoing support and maintenance, and presenting data in a meaningful way to empower and inspire staff. Copyright © 2017 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Elsevier Inc. All rights reserved.

Critical success factors in implementing an e-rostering system in a healthcare organisation.

PubMed

Soomro, Zahoor A; Ahmed, Javed; Muhammad, Raza; Hayes, Dawn; Shah, Mahmood H

2017-01-01

Effective and efficient staff scheduling has always been a challenging issue, especially in health service organisations. Both the extremes of staff shortage and overage have an adverse impact on the performance of healthcare organisations. In this case, an electronic and systematic staff scheduling (e-rostering) system is the often seen as the best solution. Unless an organisation has an effective implementation of such a system, possible cost savings, efficiency, and benefits could be minimal. This study is aimed to research key success factors for the successful effective implementation of an electronic rostering system, especially at healthcare organisations. A case study research method was used to evaluate critical success factors for effectively implementing an e-rostering system. The data were collected through interviews and observations. The findings indicate that technical support, an effective policy, leadership, clear goals and objectives, gradual change, evidence of the advantages of the new system, senior management support, and effective communication are the critical success factors in implementing an e-rostering system in healthcare organisations. Prior to this study, no such factors were grounded in the current context, so this research would help in bridging the gap towards effective implementation of an e-rostering system in the healthcare sector. This research also suggests future studies in different cultures and contexts.

Tailoring Enterprise Systems Engineering Policy for Project Scale and Complexity

NASA Technical Reports Server (NTRS)

Cox, Renee I.; Thomas, L. Dale

2014-01-01

Space systems are characterized by varying degrees of scale and complexity. Accordingly, cost-effective implementation of systems engineering also varies depending on scale and complexity. Recognizing that systems engineering and integration happen everywhere and at all levels of a given system and that the life cycle is an integrated process necessary to mature a design, the National Aeronautic and Space Administration's (NASA's) Marshall Space Flight Center (MSFC) has developed a suite of customized implementation approaches based on project scale and complexity. While it may be argued that a top-level system engineering process is common to and indeed desirable across an enterprise for all space systems, implementation of that top-level process and the associated products developed as a result differ from system to system. The implementation approaches used for developing a scientific instrument necessarily differ from those used for a space station. .

Systems engineering principles for the design of biomedical signal processing systems.

PubMed

Faust, Oliver; Acharya U, Rajendra; Sputh, Bernhard H C; Min, Lim Choo

2011-06-01

Systems engineering aims to produce reliable systems which function according to specification. In this paper we follow a systems engineering approach to design a biomedical signal processing system. We discuss requirements capturing, specification definition, implementation and testing of a classification system. These steps are executed as formal as possible. The requirements, which motivate the system design, are based on diabetes research. The main requirement for the classification system is to be a reliable component of a machine which controls diabetes. Reliability is very important, because uncontrolled diabetes may lead to hyperglycaemia (raised blood sugar) and over a period of time may cause serious damage to many of the body systems, especially the nerves and blood vessels. In a second step, these requirements are refined into a formal CSP‖ B model. The formal model expresses the system functionality in a clear and semantically strong way. Subsequently, the proven system model was translated into an implementation. This implementation was tested with use cases and failure cases. Formal modeling and automated model checking gave us deep insight in the system functionality. This insight enabled us to create a reliable and trustworthy implementation. With extensive tests we established trust in the reliability of the implementation. Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.

A strategy for the implementation of a quality indicator system in German primary care.

PubMed

van den Heuvel, Henricus

2011-01-01

The Quality and Outcomes Framework (QOF) has had a major impact on the quality of care in British general practice. It is seen as a major innovation amongst quality indicator systems and as a result various countries are looking at whether such initiatives could be used in their primary care. In Germany also the development of similar schemes has started. To propose a strategy indicating key issues for the implementation of a quality indicator scheme in German primary care. Literature review with a focus on the QOF and German quality indicator literature. There are major differences between the German and British healthcare and primary care systems. The development of quality indicator systems for German general practice is in progress and there is a net force for the implementation of such systems. The following ten key factors are suggested for the successful implementation of such a system in German primary care: involvement of general practitioners (GPs) at all levels of the development, a clear implementation process, investment in practice information technology (IT) systems, an accepted quality indicator set, a quality indicator setting institution and data collection organisation, clear financial and non-financial incentives, a 'practice registration' structure, an exception reporting mechanism, delegation of routine clinical data collection tasks to practice assistants, a stepped implementation approach and adequate evaluation processes. For the successful implementation of a quality indicator system in German primary care a number of key issues, as presented in this article, need to be taken into account.

[Implementation of a regional system for the emergency care of acute ischemic stroke: Initial results].

PubMed

Soares-Oliveira, Miguel; Araújo, Fernando

2014-06-01

Implementing integrated systems for emergency care of patients with acute ischemic stroke helps reduce morbidity and mortality. We describe the process of organizing and implementing a regional system to cover around 3.7 million people and its main initial results. We performed a descriptive analysis of the implementation process and a retrospective analysis of the following parameters: number of patients prenotified by the pre-hospital system; number of times thrombolysis was performed; door-to-needle time; and functional assessment three months after stroke. The implementation process started in November 2005 and ended in December 2009, and included 11 health centers. There were 3574 prenotifications from the prehospital system. Thrombolysis was performed in 1142 patients. The percentage of patients receiving thrombolysis rose during the study period, with a maximum of 16%. Median door-to-needle time was 62 min in 2009. Functional recovery three months after stroke was total or near total in 50% of patients. The regional system implemented for emergency care of patients with acute ischemic stroke has led to health gains, with progressive improvements in patients' access to thrombolysis, and to greater equity in the health care system, thus helping to reduce mortality from cerebrovascular disease in Portugal. Our results, which are comparable with those of international studies, support the strategy adopted for implementation of this system. Copyright © 2013 Sociedade Portuguesa de Cardiologia. Published by Elsevier España. All rights reserved.

Training for an MIS Implementation: What Does it Really Cost?

PubMed Central

Jacobs, Patt

1984-01-01

Implementation of MIS systems in a hospital environment are complex, problematic, long-term endeavors. St. Vincent Hospital and Medical Center (SVHMC) completed the implementation of its base system MIS five years after the original contract was signed. The cost of that implementation in terms of time and dollars for one aspect only, training is reported.

Private and Public Sector Enterprise Resource Planning System Post-Implementation Practices: A Comparative Mixed Method Investigation

ERIC Educational Resources Information Center

Bachman, Charles A.

2010-01-01

While private sector organizations have implemented enterprise resource planning (ERP) systems since the mid 1990s, ERP implementations within the public sector lagged by several years. This research conducted a mixed method, comparative assessment of post "go-live" ERP implementations between public and private sector organization. Based on a…

Measuring the Implementation Fidelity of the Response to Intervention Framework in Milwaukee Public Schools. Stated Briefly. REL 2017-192

ERIC Educational Resources Information Center

Ruffini, Steffen J.; Lindsay, Jim; Miskell, Ryan; Proger, Amy

2016-01-01

Regional Educational Laboratory Midwest assisted Milwaukee Public Schools in developing a fidelity monitoring system for measuring schools' progress in implementing Response to Intervention (RTI). The study examined the ratings produced by that system to determine the system's reliability, schools' progress in implementing RTI, and whether ratings…

Implementation of a Technological Innovation: Factors Influencing the Adoption of a New Student Information System

ERIC Educational Resources Information Center

Johnston, Katrina M.

2013-01-01

School information systems (SIS) have the potential to cause a change in a school's technical, structural, psycho-social, and managerial systems. Implementation of a technological innovation such as an SIS is not a one-step occurrence; it is a process that occurs over time. Implementing any technological innovation involves active learning…

77 FR 44441 - Swap Transaction Compliance and Implementation Schedule: Clearing Requirement Under Section 2(h...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-30

... implementing Title VII, the Commission should focus first on systemic risk issues and then issues relating to... implementation of the Clearing Requirement will serve to reduce systemic risk by mitigating counterparty credit... non-financial end-users because they do not pose systemic risk, and, therefore, should be given the...

Implementation of an Integrated Information Management System at the National Library of Wales: A Case Study

ERIC Educational Resources Information Center

Evans, Manon Foster; Thomas, Sian

2007-01-01

Purpose: This paper aims to describe the experiences of the National Library of Wales in implementing an integrated information management system. Design/methodology/approach: Discusses the stages involved in the procurement process, data migration and general system implementation. Findings: Emphasises the need for a well-prepared yet flexible…

The Implementation of an Accounting System for True Value in This Cost-Conscious Time, Using Handbook II. Second Revision.

ERIC Educational Resources Information Center

Moll, Emmett J.

The Milwaukee (Wisconsin) Public Schools (MPS) recently implemented a new, state-designed accounting system, called the Wisconsin Elementary and Secondary School Accounting System (WESSAS), based on guidelines proposed in the U.S. Office of Education's Handbook II. This report describes and discusses that implementation and provides numerous…

23 CFR 970.206 - Funds for establishment, development, and implementation of the systems.

Code of Federal Regulations, 2013 CFR

2013-04-01

... TRANSPORTATION FEDERAL LANDS HIGHWAYS NATIONAL PARK SERVICE MANAGEMENT SYSTEMS National Park Service Management Systems § 970.206 Funds for establishment, development, and implementation of the systems. The Park Roads...

23 CFR 970.206 - Funds for establishment, development, and implementation of the systems.

Code of Federal Regulations, 2011 CFR

2011-04-01

... TRANSPORTATION FEDERAL LANDS HIGHWAYS NATIONAL PARK SERVICE MANAGEMENT SYSTEMS National Park Service Management Systems § 970.206 Funds for establishment, development, and implementation of the systems. The Park Roads...

23 CFR 970.206 - Funds for establishment, development, and implementation of the systems.

Code of Federal Regulations, 2012 CFR

2012-04-01

... TRANSPORTATION FEDERAL LANDS HIGHWAYS NATIONAL PARK SERVICE MANAGEMENT SYSTEMS National Park Service Management Systems § 970.206 Funds for establishment, development, and implementation of the systems. The Park Roads...

Supporting Community Pharmacies with Implementation of a Web-Based Medication Management Application.

PubMed

Turner, Kea; Renfro, Chelsea; Ferreri, Stefanie; Roberts, Kim; Pfeiffenberger, Trista; Shea, Christopher M

2018-04-01

 Community pharmacists' role in clinical care is expanding in the United States and information systems are needed that extend beyond a dispensing workflow. As pharmacies adopt new systems, implementation support will be needed. This study identifies the barriers and facilitators experienced by community pharmacies in implementing a Web-based medication management application and describes the implementation strategies used to support these pharmacies.  Semistructured interviews were conducted with 28 program and research staff that provides support to community pharmacies participating in a statewide pharmacy network. Interviews were recorded, transcribed verbatim, and analyzed for themes using the Expert Recommendations for Implementing Change (ERIC).  Findings suggest that leadership support, clinical training, and computer literacy facilitated implementation, while lack of system integration, staff resistance to change, and provider reluctance to share data served as barriers. To overcome the barriers, implementation support was provided, such as assessing readiness for implementation, developing a standardized and interoperable care plan, and audit and feedback of documentation quality.  Participants used a wide array of strategies to support community pharmacies with implementation and tailored approaches to accommodate pharmacy-specific preferences. Most of the support was delivered preimplementation or in the early phase of implementation and by program or research staff rather than peer-to-peer. Implementing new pharmacy information system requires a significant amount of implementation support to help end-users learn about program features, how to integrate the software into workflow, and how to optimize the software to improve patient care. Future research should identify which implementation strategies are associated with program performance. Schattauer.

Organizational- and system-level characteristics that influence implementation of shared decision-making and strategies to address them - a scoping review.

PubMed

Scholl, Isabelle; LaRussa, Allison; Hahlweg, Pola; Kobrin, Sarah; Elwyn, Glyn

2018-03-09

Shared decision-making (SDM) is poorly implemented in routine care, despite being promoted by health policies. No reviews have solely focused on an in-depth synthesis of the literature around organizational- and system-level characteristics (i.e., characteristics of healthcare organizations and of healthcare systems) that may affect SDM implementation. A synthesis would allow exploration of interventions to address these characteristics. The study aim was to compile a comprehensive overview of organizational- and system-level characteristics that are likely to influence the implementation of SDM, and to describe strategies to address those characteristics described in the literature. We conducted a scoping review using the Arksey and O'Malley framework. The search strategy included an electronic search and a secondary search including gray literature. We included publications reporting on projects that promoted implementation of SDM or other decision support interventions in routine healthcare. We screened titles and abstracts, and assessed full texts for eligibility. We used qualitative thematic analysis to identify organizational- and system-level characteristics. After screening 7745 records and assessing 354 full texts for eligibility, 48 publications on 32 distinct implementation projects were included. Most projects (N = 22) were conducted in the USA. Several organizational-level characteristics were described as influencing the implementation of SDM, including organizational leadership, culture, resources, and priorities, as well as teams and workflows. Described system-level characteristics included policies, clinical guidelines, incentives, culture, education, and licensing. We identified potential strategies to influence the described characteristics, e.g., examples how to facilitate distribution of decision aids in a healthcare institution. Although infrequently studied, organizational- and system-level characteristics appear to play a role in the failure to implement SDM in routine care. A wide range of characteristics described as supporting and inhibiting implementation were identified. Future studies should assess the impact of these characteristics on SDM implementation more thoroughly, quantify likely interactions, and assess how characteristics might operate across types of systems and areas of healthcare. Organizations that wish to support the adoption of SDM should carefully consider the role of organizational- and system-level characteristics. Implementation and organizational theory could provide useful guidance for how to address facilitators and barriers to change.

Implementation of a Space Communications Cognitive Engine

NASA Technical Reports Server (NTRS)

Hackett, Timothy M.; Bilen, Sven G.; Ferreira, Paulo Victor R.; Wyglinski, Alexander M.; Reinhart, Richard C.

2017-01-01

Although communications-based cognitive engines have been proposed, very few have been implemented in a full system, especially in a space communications system. In this paper, we detail the implementation of a multi-objective reinforcement-learning algorithm and deep artificial neural networks for the use as a radio-resource-allocation controller. The modular software architecture presented encourages re-use and easy modification for trying different algorithms. Various trade studies involved with the system implementation and integration are discussed. These include the choice of software libraries that provide platform flexibility and promote reusability, choices regarding the deployment of this cognitive engine within a system architecture using the DVB-S2 standard and commercial hardware, and constraints placed on the cognitive engine caused by real-world radio constraints. The implemented radio-resource allocation-management controller was then integrated with the larger spaceground system developed by NASA Glenn Research Center (GRC).

48 CFR 611.002-70 - Metric system implementation.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 4 2011-10-01 2011-10-01 false Metric system... COMPETITION AND ACQUISITION PLANNING DESCRIBING AGENCY NEEDS 611.002-70 Metric system implementation. (a... to metric policy to adopt the metric system as the preferred system of weights and measurements for...

48 CFR 611.002-70 - Metric system implementation.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 4 2013-10-01 2013-10-01 false Metric system... COMPETITION AND ACQUISITION PLANNING DESCRIBING AGENCY NEEDS 611.002-70 Metric system implementation. (a... to metric policy to adopt the metric system as the preferred system of weights and measurements for...

48 CFR 611.002-70 - Metric system implementation.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 4 2014-10-01 2014-10-01 false Metric system... COMPETITION AND ACQUISITION PLANNING DESCRIBING AGENCY NEEDS 611.002-70 Metric system implementation. (a... to metric policy to adopt the metric system as the preferred system of weights and measurements for...

48 CFR 611.002-70 - Metric system implementation.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 48 Federal Acquisition Regulations System 4 2012-10-01 2012-10-01 false Metric system... COMPETITION AND ACQUISITION PLANNING DESCRIBING AGENCY NEEDS 611.002-70 Metric system implementation. (a... to metric policy to adopt the metric system as the preferred system of weights and measurements for...

A systems approach to purchasing and implementing new technology.

PubMed

Kinney, Kristin

2007-01-01

There are many risks associated with purchasing and implementing new technology. The challenge is to reduce these risks to gain maximum benefit from the new technology purchased. In the high-cost world of healthcare, there is little room for wasting time and money related to technology implementation. If the workflow of the current system is not adequately understood before purchasing and implementing a new technology, that technology may mask underlying problems and/or create new ones. The purpose of this article is to present a framework for analyzing the current process or system, identifying the strengths and the areas in need of improvement. A thorough understanding of the problems with the current system and the barriers to change is necessary to ensure the selection of the "right" technology and promote its implementation.

Quality Management Systems Implementation Compared With Organizational Maturity in Hospital.

PubMed

Moradi, Tayebeh; Jafari, Mehdi; Maleki, Mohammad Reza; Naghdi, Seyran; Ghiasvand, Hesam

2015-07-27

A quality management system can provide a framework for continuous improvement in order to increase the probability of customers and other stakeholders' satisfaction. The test maturity model helps organizations to assess the degree of maturity in implementing effective and sustained quality management systems; plan based on the current realities of the organization and prioritize their improvement programs. We aim to investigate and compare the level of organizational maturity in hospitals with the status of quality management systems implementation. This analytical cross sectional study was conducted among hospital administrators and quality experts working in hospitals with over 200 beds located in Tehran. In the first step, 32 hospitals were selected and then 96 employees working in the selected hospitals were studied. The data were gathered using the implementation checklist of quality management systems and the organization maturity questionnaire derived from ISO 10014. The content validity was calculated using Lawshe method and the reliability was estimated using test - retest method and calculation of Cronbach's alpha coefficient. The descriptive and inferential statistics were used to analyze the data using SPSS 18 software. According to the table, the mean score of organizational maturity among hospitals in the first stage of quality management systems implementation was equal to those in the third stage and hypothesis was rejected (p-value = 0.093). In general, there is no significant difference in the organizational maturity between the first and third level hospitals (in terms of implementation of quality management systems). Overall, the findings of the study show that there is no significant difference in the organizational maturity between the hospitals in different levels of the quality management systems implementation and in fact, the maturity of the organizations cannot be attributed to the implementation of such systems. As a result, hospitals should make changes in the quantity and quality of quality management systems in an effort to increase organizational maturity, whereby they improve the hospital efficiency and productivity.

Quality Management Systems Implementation Compared With Organizational Maturity in Hospital

PubMed Central

Moradi, Tayebeh; Jafari, Mehdi; Maleki, Mohammad Reza; Naghdi, Seyran; Ghiyasvand, Hesam

2016-01-01

Background: A quality management system can provide a framework for continuous improvement in order to increase the probability of customers and other stakeholders’ satisfaction. The test maturity model helps organizations to assess the degree of maturity in implementing effective and sustained quality management systems; plan based on the current realities of the organization and prioritize their improvement programs. Objectives: We aim to investigate and compare the level of organizational maturity in hospitals with the status of quality management systems implementation. Materials and Methods: This analytical cross sectional study was conducted among hospital administrators and quality experts working in hospitals with over 200 beds located in Tehran. In the first step, 32 hospitals were selected and then 96 employees working in the selected hospitals were studied. The data were gathered using the implementation checklist of quality management systems and the organization maturity questionnaire derived from ISO 10014. The content validity was calculated using Lawshe method and the reliability was estimated using test - retest method and calculation of Cronbach's alpha coefficient. The descriptive and inferential statistics were used to analyze the data using SPSS 18 software. Results: According to the table, the mean score of organizational maturity among hospitals in the first stage of quality management systems implementation was equal to those in the third stage and hypothesis was rejected (p-value = 0.093). In general, there is no significant difference in the organizational maturity between the first and third level hospitals (in terms of implementation of quality management systems). Conclusions: Overall, the findings of the study show that there is no significant difference in the organizational maturity between the hospitals in different levels of the quality management systems implementation and in fact, the maturity of the organizations cannot be attributed to the implementation of such systems. As a result, hospitals should make changes in the quantity and quality of quality management systems in an effort to increase organizational maturity, whereby they improve the hospital efficiency and productivity. PMID:26493411

National strategy for suicide prevention in Japan: impact of a national fund on progress of developing systems for suicide prevention and implementing initiatives among local authorities.

PubMed

Nakanishi, Miharu; Yamauchi, Takashi; Takeshima, Tadashi

2015-01-01

In Japan, the Cabinet Office released the 'General Principles of Suicide Prevention Policy' in 2007 and suggested nine initiatives. In 2009, a national fund was launched to help prefectures (the administrative divisions of Japan) and local authorities implement five categories of suicide-prevention programs. This paper examines the impact of the national fund on the establishment of the systems for suicide prevention and the implementation of these initiatives among local authorities. The present study included 1385 local authorities (79.5%) from all 47 prefectures that responded to the cross-sectional questionnaire survey. Improved suicide-prevention systems and the implementation of nine initiatives in April 2013 were observed among 265 local authorities (19.1%) that implemented 'Training of community service providers' and 'Public awareness campaigns'; 178 local authorities (12.9%) that implemented 'Face-to-face counseling', 'Training of community service providers' and 'Public awareness campaigns'; and 324 local authorities (23.4%) that implemented 'Trauma-informed policies and practices'. There was no significant difference in suicide-prevention systems and the implementation of nine initiatives between 203 local authorities (14.7%) that implemented only 'Public awareness campaigns' and 231 local authorities (16.7%) that did not implement any suicide-prevention programs. The results of our study suggest that the national fund promoted the establishment of community systems for suicide prevention and helped implement initiatives among local authorities. The national suicide-prevention strategy in Japan should explore a standard package of programs to guide community suicide-prevention efforts with a sustained workforce among local authorities. © 2014 The Authors. Psychiatry and Clinical Neurosciences © 2014 Japanese Society of Psychiatry and Neurology.

Changing the world: the design and implementation of comprehensive continuous integrated systems of care for individuals with co-occurring disorders.

PubMed

Minkoff, Kenneth; Cline, Christie A

2004-12-01

This article has described the CCISC model and the process of implementation of systemic implementation of co-occurring disorder services enhancements within the context of existing resources. Four projects were described as illustrations of current implementation activities. Clearly, there is need for improved services for these individuals, and increasing recognition of the need for systemic change models that are effective and efficient. The CCISC model has been recognized by SAMHSA as a consensus best practice for system design, and initial efforts at implementation appear to be promising. The existing toolkit may permit a more formal process of data-driven evaluation of system, program, clinician, and client outcomes, to better measure the effectiveness of this approach. Some projects have begun such formal evaluation processes, but more work is needed, not only with individual projects, but also to develop opportunities for multi-system evaluation, as more projects come on line.

DEVELOPING AND FIELD IMPLEMENTING A DYNAMIC ECO-ROUTING SYSTEM.

DOT National Transportation Integrated Search

2017-04-01

The study develops two different eco-routing systems and uses them to investigate and quantify the system-wide impacts of implementing an eco-routing system. The first one is basically a Nash Equilibrium feedback system, which uses the Ant Colony opt...

Implementation strategies influence the structure, process and outcome of quality systems: an empirical study of hospital departments in Sweden.

PubMed

Kunkel, S; Rosenqvist, U; Westerling, R

2009-02-01

To analyse whether the organisation of quality systems (structure, process, and outcome) is related to how these systems were implemented (implementation prerequisites, cooperation between managers and staff, and source of initiative). A questionnaire was developed, piloted and distributed to 600 hospital departments. Questions were included to reflect implementation prerequisites (adequate resources, competence, problem-solving capacity and high expectations), cooperative implementation, source of initiative (manager, staff and purchaser), structure (resources and administration), process (culture and cooperation) and outcome (goal evaluation and competence development). The adjusted response rate was 75%. Construct validity and reliability was assessed by confirmatory factor analysis, and Cronbach alpha scores were calculated. The relationships among the variables were analysed with structural equation modelling with LISREL. Implementation prerequisites were highly related to structure (0.51) and process (0.33). Cooperative implementation was associated with process (0.26) and outcome (0.34). High manager initiative was related to structure (0.19) and process (0.17). The numbers in parentheses can be interpreted as correlations. Construct validity was good, and reliability was excellent for all factors (Cronbach alpha>0.78). The model was a good representation of reality (model fit p value = 0.082). The implementation of organisationally demanding quality systems may require managers to direct and lead the process while assuring that their staff get opportunities to contribute to the planning and designing of the new system. This would correspond to a cooperative implementation strategy rather than to top-down or bottom-up strategies. The results of this study could be used to adjust implementation processes.

A multitasking behavioral control system for the Robotic All-Terrain Lunar Exploration Rover (RATLER)

NASA Technical Reports Server (NTRS)

Klarer, Paul

1993-01-01

An approach for a robotic control system which implements so called 'behavioral' control within a realtime multitasking architecture is proposed. The proposed system would attempt to ameliorate some of the problems noted by some researchers when implementing subsumptive or behavioral control systems, particularly with regard to multiple processor systems and realtime operations. The architecture is designed to allow synchronous operations between various behavior modules by taking advantage of a realtime multitasking system's intertask communications channels, and by implementing each behavior module and each interconnection node as a stand-alone task. The potential advantages of this approach over those previously described in the field are discussed. An implementation of the architecture is planned for a prototype Robotic All Terrain Lunar Exploration Rover (RATLER) currently under development and is briefly described.

Database System Design and Implementation for Marine Air-Traffic-Controller Training

DTIC Science & Technology

2017-06-01

NAVAL POSTGRADUATE SCHOOL MONTEREY, CALIFORNIA THESIS Approved for public release. Distribution is unlimited. DATABASE SYSTEM DESIGN AND...thesis 4. TITLE AND SUBTITLE DATABASE SYSTEM DESIGN AND IMPLEMENTATION FOR MARINE AIR-TRAFFIC-CONTROLLER TRAINING 5. FUNDING NUMBERS 6. AUTHOR(S...12b. DISTRIBUTION CODE 13. ABSTRACT (maximum 200 words) This project focused on the design , development, and implementation of a centralized

Implementation of an Electronic Health Records System in a Small Clinic: The Viewpoint of Clinic Staff

ERIC Educational Resources Information Center

Carayon, Pascale; Smith, Paul; Hundt, Ann Schoofs; Kuruchittham, Vipat; Li, Qian

2009-01-01

In this study, we examined the implementation of an electronic health records (EHR) system in a small family practice clinic. We used three data collection instruments to evaluate user experience, work pattern changes, and organisational changes related to the implementation and use of the EHR system: (1) an EHR user survey, (2) interviews with…

Implementing Practical Based Courses under Open and Distance Learning System: A Study of the Perception of Learners and Counsellors

ERIC Educational Resources Information Center

Basantia, Tapan Kumar

2018-01-01

Implementing practical based courses under Open and Distance Learning (ODL) system is a very difficult and challenging task as the teaching of practical based courses involves intensive practical work. For removing the difficulties and challenges in implementing the practical based courses under ODL system, there is a need to study the existing…

Teacher Attitudes as Related to the Implementation of the New Jersey Teacher Evaluation System

ERIC Educational Resources Information Center

Gallo, Donna

2016-01-01

The focus of this qualitative case study is on an attitudinal change of teachers towards teacher evaluation with the implementation of a new evaluation system. The goal of this qualitative case study was to gain an understanding of how the implementation of the new New Jersey teacher evaluation system relates to teachers' attitudes toward…

Integrated System Health Management: Foundational Concepts, Approach, and Implementation

NASA Technical Reports Server (NTRS)

Figueroa, Fernando

2009-01-01

Implementation of integrated system health management (ISHM) capability is fundamentally linked to the management of data, information, and knowledge (DIaK) with the purposeful objective of determining the health of a system. It is akin to having a team of experts who are all individually and collectively observing and analyzing a complex system, and communicating effectively with each other in order to arrive to an accurate and reliable assessment of its health. This paper presents concepts, procedures, and a specific approach as a foundation for implementing a credible ISHM capability. The capability stresses integration of DIaK from all elements of a subsystem. The intent is also to make possible implementation of on-board ISHM capability, in contrast to a remote capability. The information presented is the result of many years of research, development, and maturation of technologies, and of prototype implementations in operational systems (rocket engine test facilities). The paper will address the following topics: ISHM Model of a system; detection of anomaly indicators; determination and confirmation of anomalies; diagnostic of causes and determination of effects; consistency checking cycle; sharing of health information; sharing of display information; storage and retrieval of health information; and example implementation.

75 FR 75961 - Notice of Implementation of the Wind Erosion Prediction System for Soil Erodibility System...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-07

... Wind Erosion Prediction System for Soil Erodibility System Calculations for the Natural Resources... Erosion Prediction System (WEPS) for soil erodibility system calculations scheduled for implementation for... computer model is a process-based, daily time-step computer model that predicts soil erosion via simulation...

Accuracy and time requirements of a bar-code inventory system for medical supplies.

PubMed

Hanson, L B; Weinswig, M H; De Muth, J E

1988-02-01

The effects of implementing a bar-code system for issuing medical supplies to nursing units at a university teaching hospital were evaluated. Data on the time required to issue medical supplies to three nursing units at a 480-bed, tertiary-care teaching hospital were collected (1) before the bar-code system was implemented (i.e., when the manual system was in use), (2) one month after implementation, and (3) four months after implementation. At the same times, the accuracy of the central supply perpetual inventory was monitored using 15 selected items. One-way analysis of variance tests were done to determine any significant differences between the bar-code and manual systems. Using the bar-code system took longer than using the manual system because of a significant difference in the time required for order entry into the computer. Multiple-use requirements of the central supply computer system made entering bar-code data a much slower process. There was, however, a significant improvement in the accuracy of the perpetual inventory. Using the bar-code system for issuing medical supplies to the nursing units takes longer than using the manual system. However, the accuracy of the perpetual inventory was significantly improved with the implementation of the bar-code system.

Integrated System Health Management (ISHM): Systematic Capability Implementation

NASA Technical Reports Server (NTRS)

Figueroa, Fernando; Holland, Randy; Schmalzwel, John; Duncavage, Dan

2006-01-01

This paper provides a credible approach for implementation of ISHM capability in any system. The requirements and processes to implement ISHM capability are unique in that a credible capability is initially implemented at a low level, and it evolves to achieve higher levels by incremental augmentation. In contrast, typical capabilities, such as thrust of an engine, are implemented once at full Functional Capability Level (FCL), which is not designed to change during the life of the product. The approach will describe core ingredients (e.g. technologies, architectures, etc.) and when and how ISHM capabilities may be implemented. A specific architecture/taxonomy/ontology will be described, as well as a prototype software environment that supports development of ISHM capability. This paper will address implementation of system-wide ISHM as a core capability, and ISHM for specific subsystems as expansions and evolution, but always focusing on achieving an integrated capability.

Using ERP and WfM Systems for Implementing Business Processes: An Empirical Study

NASA Astrophysics Data System (ADS)

Aversano, Lerina; Tortorella, Maria

Software systems mainly considered from enterprises for dealing with a business process automation belong to the following two categories: Workflow Management Systems (WfMS) and Enterprise Resource Planning (ERP) systems. The wider diffusion of ERP systems tends to favourite this solution, but there are several limitations of most ERP systems for automating business processes. This paper reports an empirical study aiming at comparing the ability of implementing business processes of ERP systems and WfMSs. Two different case studies have been considered in the empirical study. It evaluates and analyses the correctness and completeness of the process models implemented by using ERP and WfM systems.

Case study of open-source enterprise resource planning implementation in a small business

NASA Astrophysics Data System (ADS)

Olson, David L.; Staley, Jesse

2012-02-01

Enterprise resource planning (ERP) systems have been recognised as offering great benefit to some organisations, although they are expensive and problematic to implement. The cost and risk make well-developed proprietorial systems unaffordable to small businesses. Open-source software (OSS) has become a viable means of producing ERP system products. The question this paper addresses is the feasibility of OSS ERP systems for small businesses. A case is reported involving two efforts to implement freely distributed ERP software products in a small US make-to-order engineering firm. The case emphasises the potential of freely distributed ERP systems, as well as some of the hurdles involved in their implementation. The paper briefly reviews highlights of OSS ERP systems, with the primary focus on reporting the case experiences for efforts to implement ERPLite software and xTuple software. While both systems worked from a technical perspective, both failed due to economic factors. While these economic conditions led to imperfect results, the case demonstrates the feasibility of OSS ERP for small businesses. Both experiences are evaluated in terms of risk dimension.

ERP implementation in hospitals: a case study.

PubMed

Agarwal, Divya; Garg, Poonam

2012-01-01

In a competitive healthcare sector, hospitals have to focus on their processes in order to deliver high-quality care while at the same time reducing costs. Many hospitals have decided to adopt one or another Enterprise Resource Planning (ERP) system to improve their businesses, but implementing an ERP system can be a demanding endeavour. The systems are so difficult to implement that some are successful; many have failed, causing multimillion dollar losses. The challenge of ERP solutions lie in implementation because they are complex, time consuming and expensive too. This paper describes the various process workflows and phases of ERP implementation at Fortis Hospital Cunningham Road, Bangalore, India. This knowledge will provide valuable insights for the researchers and practitioners to understand the different process workflows and to make informed decisions when implementing ERP in any hospital.

Implementing a Measurement Feedback System in Community Mental Health Clinics: A Case Study of Multilevel Barriers and Facilitators.

PubMed

Gleacher, Alissa A; Olin, Serene S; Nadeem, Erum; Pollock, Michele; Ringle, Vanesa; Bickman, Leonard; Douglas, Susan; Hoagwood, Kimberly

2016-05-01

Measurement feedback systems (MFSs) have been proposed as a means of improving practice. The present study examined the implementation of a MFS, the Contextualized Feedback System (CFS), in two community-based clinic sites. Significant implementation differences across sites provided a basis for examining factors that influenced clinician uptake of CFS. Following the theoretical implementation framework of Aarons et al. (Adm Policy Mental Health Mental Health Serv Res 38(1):4-23, 2011), we coded qualitative data collected from eighteen clinicians (13 from Clinic U and 5 from Clinic R) who participated in semi-structured interviews about their experience with CFS implementation. Results suggest that clinicians at both clinics perceived more barriers than facilitators to CFS implementation. Interestingly, clinicians at the higher implementing clinic reported a higher proportion of barriers to facilitators (3:1 vs. 2:1); however, these clinicians also reported a significantly higher level of organizational and leadership supports for CFS implementation. Implications of these findings are discussed.

Safe and successful implementation of CPOE for chemotherapy at a children's cancer center.

PubMed

Hoffman, James M; Baker, Donald K; Howard, Scott C; Laver, Joseph H; Shenep, Jerry L

2011-02-01

Computerized prescriber order entry (CPOE) for medications has been implemented in only approximately 1 in 6 United States hospitals, with CPOE for chemotherapy lagging behind that for nonchemotherapy medications. The high risks associated with chemotherapy combined with other aspects of cancer care present unique challenges for the safe and appropriate use of CPOE. This article describes the process for safe and successful implementation of CPOE for chemotherapy at a children's cancer center. A core principle throughout the development and implementation of this system was that it must be as safe (and eventually safer) as existing paper systems and processes. The history of requiring standardized, regimen-specific, preprinted paper order forms served as the foundation for safe implementation of CPOE for chemotherapy. Extensive use of electronic order sets with advanced functionality; formal process redesign and system analysis; automated clinical decision support; and a phased implementation approach were essential strategies for safe implementation of CPOE. With careful planning and adequate resources, CPOE for chemotherapy can be safely implemented.

Simulating fail-stop in asynchronous distributed systems

NASA Technical Reports Server (NTRS)

Sabel, Laura; Marzullo, Keith

1994-01-01

The fail-stop failure model appears frequently in the distributed systems literature. However, in an asynchronous distributed system, the fail-stop model cannot be implemented. In particular, it is impossible to reliably detect crash failures in an asynchronous system. In this paper, we show that it is possible to specify and implement a failure model that is indistinguishable from the fail-stop model from the point of view of any process within an asynchronous system. We give necessary conditions for a failure model to be indistinguishable from the fail-stop model, and derive lower bounds on the amount of process replication needed to implement such a failure model. We present a simple one-round protocol for implementing one such failure model, which we call simulated fail-stop.

The implementation of POSTGRES

NASA Technical Reports Server (NTRS)

Stonebraker, Michael; Rowe, Lawrence A.; Hirohama, Michael

1990-01-01

The design and implementation decisions made for the three-dimensional data manager POSTGRES are discussed. Attention is restricted to the DBMS backend functions. The POSTGRES data model and query language, the rules system, the storage system, the POSTGRES implementation, and the current status and performance are discussed.

Implementation of an Automated System.

ERIC Educational Resources Information Center

Epstein, Susan Baerg

1983-01-01

Discussion of care and planning given to the implementation of an automated library system highlights informing the staff in the early stages, project management, involvement of the entire staff, the control log, time and money, where and when to go online, and implementation consultants. (EJS)

Investigation and Implementation of a Tree Transformation System for User Friendly Programming.

DTIC Science & Technology

1984-12-01

systems have become an important area of research because of theiL direct impact on all areas of computer science such as software engineering ...RD-i52 716 INVESTIGTIN AND IMPLEMENTATION OF A TREE I/2TRANSFORMATION SYSTEM FOR USER FRIENDLY PROGRAMMING (U) NAVAL POSTGRADUATE SCHOOL MONTEREY CA...Implementation of a Master’s Thesis Tree Transformation System for User December 1984 Friendly Programming 6. PERFORMING ORG. REPORT NUMBER 7. AU~THOR(s) S

Graphics Processing Unit (GPU) implementation of image processing algorithms to improve system performance of the Control, Acquisition, Processing, and Image Display System (CAPIDS) of the Micro-Angiographic Fluoroscope (MAF).

PubMed

Vasan, S N Swetadri; Ionita, Ciprian N; Titus, A H; Cartwright, A N; Bednarek, D R; Rudin, S

2012-02-23

We present the image processing upgrades implemented on a Graphics Processing Unit (GPU) in the Control, Acquisition, Processing, and Image Display System (CAPIDS) for the custom Micro-Angiographic Fluoroscope (MAF) detector. Most of the image processing currently implemented in the CAPIDS system is pixel independent; that is, the operation on each pixel is the same and the operation on one does not depend upon the result from the operation on the other, allowing the entire image to be processed in parallel. GPU hardware was developed for this kind of massive parallel processing implementation. Thus for an algorithm which has a high amount of parallelism, a GPU implementation is much faster than a CPU implementation. The image processing algorithm upgrades implemented on the CAPIDS system include flat field correction, temporal filtering, image subtraction, roadmap mask generation and display window and leveling. A comparison between the previous and the upgraded version of CAPIDS has been presented, to demonstrate how the improvement is achieved. By performing the image processing on a GPU, significant improvements (with respect to timing or frame rate) have been achieved, including stable operation of the system at 30 fps during a fluoroscopy run, a DSA run, a roadmap procedure and automatic image windowing and leveling during each frame.

Diabetes Patient Tracker, a personal digital assistant-based diabetes management system for primary care practices in Oklahoma.

PubMed

Nagykaldi, Zsolt; Mold, James W

2003-01-01

It has been demonstrated that electronic patient registries combined with a clinical decision support system have a significant positive impact on the documentation and delivery of services provided by health care professionals. While implementation of available commercial systems has not always been proven effective in a number of primary care practices, development and implementation of such a system in a practice-based research network might enhance successful implementation. Physicians in our practice-based research network (Oklahoma Physicians Resource/Research Network) initiated a project that aimed at designing, testing, and implementing a personal digital assistant-based diabetes management system. We utilized the "best practice" approach to determine the principles on which the application must operate. System development and beta testing were also accomplished based on the direct feedback of user clinicians. Practice Enhancement Assistants (PEAs) were available in the practices for assistance with implementation. Implementation of the Diabetes Patient Tracker (DPT) resulted in a significant improvement (p<0.05) in nine of 10 diabetic quality of care measures compared with pre-intervention levels in 20 primary care practices. Regular PEA visits similarly increased the number of foot exams and retinal exams performed in the last year (p=0.03 and 0.02, respectively). DPT is a low-cost, feasible, easily implementable, and very effective paper-less tool that significantly improves patient care and documentation in primary care practices.

Health information exchange implementation: lessons learned and critical success factors from a case study.

PubMed

Feldman, Sue S; Schooley, Benjamin L; Bhavsar, Grishma P

2014-08-15

Much attention has been given to the proposition that the exchange of health information as an act, and health information exchange (HIE), as an entity, are critical components of a framework for health care change, yet little has been studied to understand the value proposition of implementing HIE with a statewide HIE. Such an organization facilitates the exchange of health information across disparate systems, thus following patients as they move across different care settings and encounters, whether or not they share an organizational affiliation. A sociotechnical systems approach and an interorganizational systems framework were used to examine implementation of a health system electronic medical record (EMR) system onto a statewide HIE, under a cooperative agreement with the Office of the National Coordinator for Health Information Technology, and its collaborating organizations. The objective of the study was to focus on the implementation of a health system onto a statewide HIE; provide insight into the technical, organizational, and governance aspects of a large private health system and the Virginia statewide HIE (organizations with the shared goal of exchanging health information); and to understand the organizational motivations and value propositions apparent during HIE implementation. We used a formative evaluation methodology to investigate the first implementation of a health system onto the statewide HIE. Qualitative methods (direct observation, 36 hours), informal information gathering, semistructured interviews (N=12), and document analysis were used to gather data between August 12, 2012 and June 24, 2013. Derived from sociotechnical concepts, a Blended Value Collaboration Enactment Framework guided the data gathering and analysis to understand organizational stakeholders' perspectives across technical, organizational, and governance dimensions. Several challenges, successes, and lessons learned during the implementation of a health system to the statewide HIE were found. The most significant perceived success was accomplishing the implementation, although many interviewees also underscored the value of a project champion with decision-making power. In terms of lessons learned, social reasons were found to be very significant motivators for early implementation, frequently outweighing economic motivations. It was clear that understanding the guides early in the project would have mitigated some of the challenges that emerged, and early communication with the electronic health record vendor so that they have a solid understanding of the undertaking was critical. An HIE implementations evaluation framework was found to be useful for assessing challenges, motivations, value propositions for participating, and success factors to consider for future implementations. This case study illuminates five critical success factors for implementation of a health system onto a statewide HIE. This study also reveals that organizations have varied motivations and value proposition perceptions for engaging in the exchange of health information, few of which, at the early stages, are economically driven.

Health Information Exchange Implementation: Lessons Learned and Critical Success Factors From a Case Study

PubMed Central

2014-01-01

Background Much attention has been given to the proposition that the exchange of health information as an act, and health information exchange (HIE), as an entity, are critical components of a framework for health care change, yet little has been studied to understand the value proposition of implementing HIE with a statewide HIE. Such an organization facilitates the exchange of health information across disparate systems, thus following patients as they move across different care settings and encounters, whether or not they share an organizational affiliation. A sociotechnical systems approach and an interorganizational systems framework were used to examine implementation of a health system electronic medical record (EMR) system onto a statewide HIE, under a cooperative agreement with the Office of the National Coordinator for Health Information Technology, and its collaborating organizations. Objective The objective of the study was to focus on the implementation of a health system onto a statewide HIE; provide insight into the technical, organizational, and governance aspects of a large private health system and the Virginia statewide HIE (organizations with the shared goal of exchanging health information); and to understand the organizational motivations and value propositions apparent during HIE implementation. Methods We used a formative evaluation methodology to investigate the first implementation of a health system onto the statewide HIE. Qualitative methods (direct observation, 36 hours), informal information gathering, semistructured interviews (N=12), and document analysis were used to gather data between August 12, 2012 and June 24, 2013. Derived from sociotechnical concepts, a Blended Value Collaboration Enactment Framework guided the data gathering and analysis to understand organizational stakeholders’ perspectives across technical, organizational, and governance dimensions. Results Several challenges, successes, and lessons learned during the implementation of a health system to the statewide HIE were found. The most significant perceived success was accomplishing the implementation, although many interviewees also underscored the value of a project champion with decision-making power. In terms of lessons learned, social reasons were found to be very significant motivators for early implementation, frequently outweighing economic motivations. It was clear that understanding the guides early in the project would have mitigated some of the challenges that emerged, and early communication with the electronic health record vendor so that they have a solid understanding of the undertaking was critical. An HIE implementations evaluation framework was found to be useful for assessing challenges, motivations, value propositions for participating, and success factors to consider for future implementations. Conclusions This case study illuminates five critical success factors for implementation of a health system onto a statewide HIE. This study also reveals that organizations have varied motivations and value proposition perceptions for engaging in the exchange of health information, few of which, at the early stages, are economically driven. PMID:25599991

Improved cost monitoring and control through the Earned Value Management System

NASA Astrophysics Data System (ADS)

Hunter, Howard; Fitzgerald, Richard; Barlow, Dewey

2014-01-01

As economic pressure and competition for budget among federal agencies has increased, there has been an increasing need for more granular data and robust management information systems. This is especially true for the execution of major civilian space programs. This need has resulted in new program management requirements being implemented in an attempt to limit cost and schedule growth. In particular, NASA Procedural Requirements (NPR) 7120.5D requires the implementation of an Earned Value Management System (EVMS) compliant with the requirements of American National Standards Institute (ANSI)/Electronic Industries Alliance Standard 748-B. The Radiation Belt Storm Probes (RBSP) program management team at The Johns Hopkins University Applied Physics Laboratory (JHU/APL) made a decision to implement an EVMS on RBSP during Phase B—a year earlier than specified in the contractual Phase C reporting requirement as defined in the NPR. This decision was made so that the project would have the benefit of 12 months of training and hands-on implementation during Phase B. Although there were a number of technical and process hurdles encountered during Phase B and into Phase C, the system was working well when the Integrated Baseline Review (IBR) was held in August 2009. The IBR was a success because it met the review requirements. It was also clear to all IBR participants that the EVMS was providing value to the project management team. Although the IBR pointed out some areas of concern regarding process and ANSI compliance, the system had markedly improved the project's ability to monitor cost and schedule. This, in turn, allowed the project team to foresee problems in advance, formulate corrective actions, and implement course corrections without causing significant adverse impact to the project. Opponents of EVMS systems often communicate the unfavorable opinion that EVMS systems create unnecessary cost and administration. Although it is undeniable that EVMS implementation does not occur without cost, the cost is minimal in comparison to the benefits of successful implementation. This paper will focus on the implementation of EVMS on the RBSP project, explain EV processes and the implementation's cost, and analyze the benefits of EVMS to provide insight into cost/benefit considerations for other projects considering EVMS implementation. This paper will do this by focusing on the following points: (1) RBSP is the first full-up implementation of earned value management (EVM) at JHU/APL; (2) RBSP EVM started in Phase B; (3) RBSP EVM implementation has been working well in Phase C/D; (4) RBSP EVM implementation has been recognized by Goddard Space Flight Center and NASA Headquarters as successful; and (5) an assessment of the benefits of EVMS to the project management team and sponsor shows that the system's benefits outweigh the cost of implementation.

Study protocol for evaluating the implementation and effectiveness of an emergency department longitudinal patient monitoring system using a mixed-methods approach.

PubMed

Ward, Marie; McAuliffe, Eilish; Wakai, Abel; Geary, Una; Browne, John; Deasy, Conor; Schull, Michael; Boland, Fiona; McDaid, Fiona; Coughlan, Eoin; O'Sullivan, Ronan

2017-01-23

Early detection of patient deterioration is a key element of patient safety as it allows timely clinical intervention and potential rescue, thus reducing the risks of serious patient safety incidents. Longitudinal patient monitoring systems have been widely recommended for use to detect clinical deterioration. However, there is conflicting evidence on whether they improve patient outcomes. This may in part be related to variation in the rigour with which they are implemented and evaluated. This study aims to evaluate the implementation and effectiveness of a longitudinal patient monitoring system designed for adult patients in the unique environment of the Emergency Department (ED). A novel participatory action research (PAR) approach is taken where socio-technical systems (STS) theory and analysis informs the implementation through the improvement methodology of 'Plan Do Study Act' (PDSA) cycles. We hypothesise that conducting an STS analysis of the ED before beginning the PDSA cycles will provide for a much richer understanding of the current situation and possible challenges to implementing the ED-specific longitudinal patient monitoring system. This methodology will enable both a process and an outcome evaluation of implementing the ED-specific longitudinal patient monitoring system. Process evaluations can help distinguish between interventions that have inherent faults and those that are badly executed. Over 1.2 million patients attend EDs annually in Ireland; the successful implementation of an ED-specific longitudinal patient monitoring system has the potential to affect the care of a significant number of such patients. To the best of our knowledge, this is the first study combining PAR, STS and multiple PDSA cycles to evaluate the implementation of an ED-specific longitudinal patient monitoring system and to determine (through process and outcome evaluation) whether this system can significantly improve patient outcomes by early detection and appropriate intervention for patients at risk of clinical deterioration.

Design and implementation of a telemedicine system using Bluetooth protocol and GSM/GPRS network, for real time remote patient monitoring.

PubMed

Jasemian, Yousef; Nielsen, Lars Arendt

2005-01-01

This paper introduces the design and implementation of a generic wireless and Real-time Multi-purpose Health Care Telemedicine system applying Bluetooth protocol, Global System for Mobile Communications (GSM) and General Packet Radio Service (GPRS). The paper explores the factors that should be considered when evaluating different technologies for application in telemedicine system. The design and implementation of an embedded wireless communication platform utilising Bluetooth protocol is described, and the implementation problems and limitations are investigated. The system is tested and its telecommunication general aspects are verified. The results showed that the system has (97.9 +/- 1.3)% Up-time, 2.5 x 10(-5) Bit Error Rate, 1% Dropped Call Rate, 97.4% Call Success Rate, 5 second transmission delay in average, (3.42 +/- 0.11) kbps throughput, and the system may have application in electrocardiography.

Practical Challenges of Systems Thinking and Modeling in Public Health

PubMed Central

Trochim, William M.; Cabrera, Derek A.; Milstein, Bobby; Gallagher, Richard S.; Leischow, Scott J.

2006-01-01

Objectives. Awareness of and support for systems thinking and modeling in the public health field are growing, yet there are many practical challenges to implementation. We sought to identify and describe these challenges from the perspectives of practicing public health professionals. Methods. A systems-based methodology, concept mapping, was used in a study of 133 participants from 2 systems-based public health initiatives (the Initiative for the Study and Implementation of Systems and the Syndemics Prevention Network). This method identified 100 key challenges to implementation of systems thinking and modeling in public health work. Results. The project resulted in a map identifying 8 categories of challenges and the dynamic interactions among them. Conclusions. Implementation by public health professionals of the 8 simple rules we derived from the clusters in the map identified here will help to address challenges and improve the organization of systems that protect the public’s health. PMID:16449581

Single-channel voice-response-system program documentation volume I : system description

DOT National Transportation Integrated Search

1977-01-01

This report documents the design and implementation of a Voice Response System (VRS) using Adaptive Differential Pulse Code Modulation (ADPCM) voice coding. Implemented on a Digital Equipment Corporation PDP-11/20,R this VRS system supports a single ...

Interorganizational health care systems implementations: an exploratory study of early electronic commerce initiatives.

PubMed

Payton, F C; Ginzberg, M J

2001-01-01

Changing business practices, customers needs, and market dynamics have driven many organizations to implement interorganizational systems (IOSs). IOSs have been successfully implemented in the banking, cotton, airline, and consumer-goods industries, and recently attention has turned to the health care industry. This article describes an exploratory study of health care IOS implementations based on the voluntary community health information network (CHIN) model.

Implementation of a system to provide mobile satellite services in North America

NASA Technical Reports Server (NTRS)

Johanson, Gary A.; Davies, N. George; Tisdale, William R. H.

1993-01-01

This paper describes the implementation of the ground network to support Mobile Satellite Services (MSS). The system is designed to take advantage of a powerful new satellite series and provides significant improvements in capacity and throughput over systems in service today. The system is described in terms of the services provided and the system architecture being implemented to deliver those services. The system operation is described including examples of a circuit switched and packet switched call placement. The physical architecture is presented showing the major hardware components and software functionality placement within the hardware.

Implementation of the Enhanced Flight Termination System at National Aeronautics and Space Administration Dryden Flight Research Center

NASA Technical Reports Server (NTRS)

Tow, David

2010-01-01

This paper discusses the methodology, requirements, tests, and results of the implementation of the current operating capability for the Enhanced Flight Termination System (EFTS) at the National Aeronautics and Space Administration (NASA) Dryden Flight Research Center (DFRC). The implementation involves the development of the EFTS at NASA DFRC starting from the requirements to system safety review to full end to end system testing, and concluding with the acceptance of the system as an operational system. The paper discusses the first operational usage and subsequent flight utilizing EFTS successfully.

Cost and implementation analysis of a personal digital assistant system for laboratory data collection.

PubMed

Blaya, J A; Gomez, W; Rodriguez, P; Fraser, H

2008-08-01

One hundred and twenty-six public health centers and laboratories in Lima, Peru, without internet. We have previously shown that a personal digital assistant (PDA) based system reduces data collection delays and errors for tuberculosis (TB) laboratory results when compared to a paper system. To assess the data collection efficiency of each system and the resources required to develop, implement and transfer the PDA-based system to a resource-poor setting. Time-motion study of data collectors using the PDA-based and paper systems. Cost analysis of developing, implementing and transferring the PDA-based system to a local organization and their redeployment of the system. Work hours spent collecting and processing results decreased by 60% (P < 0.001). Users perceived this decrease to be 70% and had no technical problems they failed to fix. The total cost and time to develop and implement the intervention was US$26092 and 22 weeks. The cost to extend the system to cover nine more districts was $1125 and to implement collecting patient weights was $4107. A PDA-based system drastically reduced the effort required to collect TB laboratory results from remote locations. With the framework described, open-source software and local development, organizations in resource-poor settings could reap the benefits of this technology.

The Influence of Leadership in Implementing Management Systems

NASA Astrophysics Data System (ADS)

Nae, Ilie; Solomon, Gheorghe; Severin, Irina

2014-12-01

This paper presents a new perspective of the implementation of Management Systems within organizations in order to increase the success rate. The objective is to analyse how the leadership could influence positively or negatively the implementation, according to the leadership approach chosen. It offers a method to analyse the maturity of the leadership for any organization, based on existing leadership models, completing these models with specificities of a Management System. The Maturity Grid is extended to key elements of the Organizational Leadership: Strategic Planning, Process and Performance. The results expected are to change the current understanding of leadership during a Management System implementation(leadership seen as a principle) to an active leadership, implemented at organizational level. It propose an alternative of the classic management approach, to a Performance Management approach, that integrates naturally the leadership in all processes and methods

77 FR 51933 - Privacy Act; Implementation

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-28

...), is implementing a new system of records, 09-25-0223, ``NIH Records Related to Research Misconduct... protect the integrity of NIH research misconduct proceedings and to protect the identity of confidential... implementing a new system of records called, ``NIH Records Related to Research Misconduct Proceedings'' (09- 25...

NMR implementation of adiabatic SAT algorithm using strongly modulated pulses.

PubMed

Mitra, Avik; Mahesh, T S; Kumar, Anil

2008-03-28

NMR implementation of adiabatic algorithms face severe problems in homonuclear spin systems since the qubit selective pulses are long and during this period, evolution under the Hamiltonian and decoherence cause errors. The decoherence destroys the answer as it causes the final state to evolve to mixed state and in homonuclear systems, evolution under the internal Hamiltonian causes phase errors preventing the initial state to converge to the solution state. The resolution of these issues is necessary before one can proceed to implement an adiabatic algorithm in a large system where homonuclear coupled spins will become a necessity. In the present work, we demonstrate that by using "strongly modulated pulses" (SMPs) for the creation of interpolating Hamiltonian, one can circumvent both the problems and successfully implement the adiabatic SAT algorithm in a homonuclear three qubit system. This work also demonstrates that the SMPs tremendously reduce the time taken for the implementation of the algorithm, can overcome problems associated with decoherence, and will be the modality in future implementation of quantum information processing by NMR.

GPU computing with Kaczmarz’s and other iterative algorithms for linear systems

PubMed Central

Elble, Joseph M.; Sahinidis, Nikolaos V.; Vouzis, Panagiotis

2009-01-01

The graphics processing unit (GPU) is used to solve large linear systems derived from partial differential equations. The differential equations studied are strongly convection-dominated, of various sizes, and common to many fields, including computational fluid dynamics, heat transfer, and structural mechanics. The paper presents comparisons between GPU and CPU implementations of several well-known iterative methods, including Kaczmarz’s, Cimmino’s, component averaging, conjugate gradient normal residual (CGNR), symmetric successive overrelaxation-preconditioned conjugate gradient, and conjugate-gradient-accelerated component-averaged row projections (CARP-CG). Computations are preformed with dense as well as general banded systems. The results demonstrate that our GPU implementation outperforms CPU implementations of these algorithms, as well as previously studied parallel implementations on Linux clusters and shared memory systems. While the CGNR method had begun to fall out of favor for solving such problems, for the problems studied in this paper, the CGNR method implemented on the GPU performed better than the other methods, including a cluster implementation of the CARP-CG method. PMID:20526446

Research of negotiation in network trade system based on multi-agent

NASA Astrophysics Data System (ADS)

Cai, Jun; Wang, Guozheng; Wu, Haiyan

2009-07-01

A construction and implementation technology of network trade based on multi-agent is described in this paper. First, we researched the technology of multi-agent, then we discussed the consumer's behaviors and the negotiation between purchaser and bargainer which emerges in the traditional business mode and analysed the key technology to implement the network trade system. Finally, we implement the system.

An enhanced security solution for electronic medical records based on AES hybrid technique with SOAP/XML and SHA-1.

PubMed

Kiah, M L Mat; Nabi, Mohamed S; Zaidan, B B; Zaidan, A A

2013-10-01

This study aims to provide security solutions for implementing electronic medical records (EMRs). E-Health organizations could utilize the proposed method and implement recommended solutions in medical/health systems. Majority of the required security features of EMRs were noted. The methods used were tested against each of these security features. In implementing the system, the combination that satisfied all of the security features of EMRs was selected. Secure implementation and management of EMRs facilitate the safeguarding of the confidentiality, integrity, and availability of e-health organization systems. Health practitioners, patients, and visitors can use the information system facilities safely and with confidence anytime and anywhere. After critically reviewing security and data transmission methods, a new hybrid method was proposed to be implemented on EMR systems. This method will enhance the robustness, security, and integration of EMR systems. The hybrid of simple object access protocol/extensible markup language (XML) with advanced encryption standard and secure hash algorithm version 1 has achieved the security requirements of an EMR system with the capability of integrating with other systems through the design of XML messages.

Implementation guidelines for road weather information systems

DOT National Transportation Integrated Search

1997-11-01

The report presents guidelines for implementing road weather information systems (RWIS). These guidelines will assist highway agency personnel with the planning, installation, and maintenance of road weather information systems for either ice or high...

Efficient Implementation of Multigrid Solvers on Message-Passing Parrallel Systems

NASA Technical Reports Server (NTRS)

Lou, John

1994-01-01

We discuss our implementation strategies for finite difference multigrid partial differential equation (PDE) solvers on message-passing systems. Our target parallel architecture is Intel parallel computers: the Delta and Paragon system.

Disability Policy Implementation From a Cross-Cultural Perspective.

PubMed

Verdugo, Miguel A; Jenaro, Cristina; Calvo, Isabel; Navas, Patricia

2017-07-01

Implementation of disability policy is influenced by social, political, and cultural factors. Based on published work, this article discusses four guidelines considered critical for successful policy implementation from a cross-cultural perspective. These guidelines are to: (a) base policy implementation on a contextual analysis, (b) employ a value-based approach, (c) align the service delivery system both vertically and horizontally, and (d) engage in a partnership in policy implementation. Public policy should be understood from a systems perspective that includes cross-cultural issues, such as how different stakeholders are acting and the way they plan and implement policy.

Design and implementation of a modulator-based free-space optical backplane for multiprocessor applications.

PubMed

Kirk, Andrew G; Plant, David V; Szymanski, Ted H; Vranesic, Zvonko G; Tooley, Frank A P; Rolston, David R; Ayliffe, Michael H; Lacroix, Frederic K; Robertson, Brian; Bernier, Eric; Brosseau, Daniel F

2003-05-10

Design and implementation of a free-space optical backplane for multiprocessor applications is presented. The system is designed to interconnect four multiprocessor nodes that communicate by using multiplexed 32-bit packets. Each multiprocessor node is electrically connected to an optoelectronic VLSI chip which implements the hyperplane interconnection architecture. The chips each contain 256 optical transmitters (implemented as dual-rail multiple quantum-well modulators) and 256 optical receivers. A rigid free-space microoptical interconnection system that interconnects the transceiver chips in a 512-channel unidirectional ring is implemented. Full design, implementation, and operational details are provided.

Design and implementation of a modulator-based free-space optical backplane for multiprocessor applications

NASA Astrophysics Data System (ADS)

Kirk, Andrew G.; Plant, David V.; Szymanski, Ted H.; Vranesic, Zvonko G.; Tooley, Frank A. P.; Rolston, David R.; Ayliffe, Michael H.; Lacroix, Frederic K.; Robertson, Brian; Bernier, Eric; Brosseau, Daniel F.

2003-05-01

Design and implementation of a free-space optical backplane for multiprocessor applications is presented. The system is designed to interconnect four multiprocessor nodes that communicate by using multiplexed 32-bit packets. Each multiprocessor node is electrically connected to an optoelectronic VLSI chip which implements the hyperplane interconnection architecture. The chips each contain 256 optical transmitters (implemented as dual-rail multiple quantum-well modulators) and 256 optical receivers. A rigid free-space microoptical interconnection system that interconnects the transceiver chips in a 512-channel unidirectional ring is implemented. Full design, implementation, and operational details are provided.

Implementation of a Goal-Based Systems Engineering Process Using the Systems Modeling Language (SysML)

NASA Technical Reports Server (NTRS)

Patterson, Jonathan D.; Breckenridge, Jonathan T.; Johnson, Stephen B.

2013-01-01

Building upon the purpose, theoretical approach, and use of a Goal-Function Tree (GFT) being presented by Dr. Stephen B. Johnson, described in a related Infotech 2013 ISHM abstract titled "Goal-Function Tree Modeling for Systems Engineering and Fault Management", this paper will describe the core framework used to implement the GFTbased systems engineering process using the Systems Modeling Language (SysML). These two papers are ideally accepted and presented together in the same Infotech session. Statement of problem: SysML, as a tool, is currently not capable of implementing the theoretical approach described within the "Goal-Function Tree Modeling for Systems Engineering and Fault Management" paper cited above. More generally, SysML's current capabilities to model functional decompositions in the rigorous manner required in the GFT approach are limited. The GFT is a new Model-Based Systems Engineering (MBSE) approach to the development of goals and requirements, functions, and its linkage to design. As a growing standard for systems engineering, it is important to develop methods to implement GFT in SysML. Proposed Method of Solution: Many of the central concepts of the SysML language are needed to implement a GFT for large complex systems. In the implementation of those central concepts, the following will be described in detail: changes to the nominal SysML process, model view definitions and examples, diagram definitions and examples, and detailed SysML construct and stereotype definitions.

Web Based GIS System For Monitoring the Implementation of County Integrated Development Plan a Case Study of Nandi County, Kenya.

NASA Astrophysics Data System (ADS)

Kurui, P. K.; Mutua, F.

2016-12-01

The paper seek to propose a conceptual framework of a way of monitoring and evaluating the implementation of the projects listed in the county integrated development plan by applying the use of the geospatial technologies with the focus being developing a web based GIS system in which the public can be able to track and monitor the progress of implementation of the projects in various parts of the county , although the guidelines developed by the ministry of devolution provides for the inclusion of the implementation monitoring and evaluation framework specifying projects to be implemented during the plan period and specification of veriable indicators it does not provide mechanisms for public participation during implementation and monitoring stage. This calls for a system that the public can interact with. The web based GIS system has been developed using the free open source softwares. Development projects have been categorized into; ongoing, completed and planned It can also be shown that a web based GIS system can be used as an important tool for monitoring the implementation of the CIDP due to its easy to use nature and supported by the fact that internet is easily accessed by the majority of the public making it a powerful tool for public participation.

The implementation of mindfulness in healthcare systems: a theoretical analysis.

PubMed

Demarzo, M M P; Cebolla, A; Garcia-Campayo, J

2015-01-01

Evidence regarding the efficacy of mindfulness-based interventions (MBIs) is increasing exponentially; however, there are still challenges to their integration in healthcare systems. Our goal is to provide a conceptual framework that addresses these challenges in order to bring about scholarly dialog and support health managers and practitioners with the implementation of MBIs in healthcare. This is an opinative narrative review based on theoretical and empirical data that address key issues in the implementation of mindfulness in healthcare systems, such as the training of professionals, funding and costs of interventions, cost effectiveness and innovative delivery models. We show that even in the United Kingdom, where mindfulness has a high level of implementation, there is a high variability in the access to MBIs. In addition, we discuss innovative approaches based on "complex interventions," "stepped-care" and "low intensity-high volume" concepts that may prove fruitful in the development and implementation of MBIs in national healthcare systems, particularly in Primary Care. In order to better understand barriers and opportunities for mindfulness implementation in healthcare systems, it is necessary to be aware that MBIs are "complex interventions," which require innovative approaches and delivery models to implement these interventions in a cost-effective and accessible way. Copyright © 2015 Elsevier Inc. All rights reserved.

YUCSA: A CLIPS expert database system to monitor academic performance

NASA Technical Reports Server (NTRS)

Toptsis, Anestis A.; Ho, Frankie; Leindekar, Milton; Foon, Debra Low; Carbonaro, Mike

1991-01-01

The York University CLIPS Student Administrator (YUCSA), an expert database system implemented in C Language Integrated Processing System (CLIPS), for monitoring the academic performance of undergraduate students at York University, is discussed. The expert system component in the system has already been implemented for two major departments, and it is under testing and enhancement for more departments. Also, more elaborate user interfaces are under development. We describe the design and implementation of the system, problems encountered, and immediate future plans. The system has excellent maintainability and it is very efficient, taking less than one minute to complete an assessment of one student.

Hospital IT adoption strategies associated with implementation success: implications for achieving meaningful use.

PubMed

Ford, Eric W; Menachemi, Nir; Huerta, Timothy R; Yu, Feliciano

2010-01-01

Health systems are facing significant pressure to either implement health information technology (HIT) systems that have "certified" electronic health record applications and that fulfill the federal government's definition of "meaningful use" or risk substantial financial penalties in the near future. To this end, hospitals have adopted one of three strategies, described as "best of breed," "best of suite," and "single vendor," to meet organizational and regulatory demands. The single-vendor strategy is used by the simple majority of U.S. hospitals, but is it the most effective mode for achieving full implementation? Moreover, what are the implications of adopting this strategy for achieving meaningful use? The simple answer to the first question is that the hospitals using the hybrid best of suite strategy had fully implemented HIT systems in significantly greater proportions than did hospitals employing either of the other strategies. Nonprofit and system-affiliated hospitals were more likely to have fully implemented their HIT systems. In addition, increased health maintenance organization market penetration rates were positively correlated with complete implementation rates. These results have ongoing implications for achieving meaningful use in the near term. The federal government's rewards and incentives program related to the meaningful use of HIT in hospitals has created an organizational imperative to implement such systems. For hospitals that have not begun systemwide implementation, pursuing a best of suite strategy may provide the greatest chance for achieving all or some of the meaningful use targets in the near term or at least avoiding future penalties scheduled to begin in 2015.

The Implementation of an Office Systems Management Curriculum for the 1980s.

ERIC Educational Resources Information Center

Stallard, John J.

1982-01-01

Describes the implementation of an office systems management curriculum (at the University of Tennessee, Knoxville) that trains students to develop their conceptual skills and to train for management-level positions. Courses involve the automated office, records systems, office systems analysis, case studies, and management information systems.…

78 FR 37676 - Federal Acquisition Regulation; System for Award Management Name Change, Phase 1 Implementation

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-21

....204-13 System for Award Management Maintenance. * * * * * System for Award Management Maintenance (Jul...; System for Award Management Name Change, Phase 1 Implementation AGENCY: Department of Defense (DoD... System for Award Management (SAM) database. DATES: Effective Date: July 22, 2013. FOR FURTHER INFORMATION...

Implementation of an image sharing system significantly reduced repeat computed tomographic imaging in a regional trauma system.

PubMed

Banerjee, Aman; Zosa, Brenda M; Allen, Debra; Wilczewski, Patricia A; Ferguson, Robert; Claridge, Jeffrey A

2016-01-01

The practice of repeating computed tomography (re-CT) is common among trauma patients transferred between hospitals incurring additional cost and radiation exposure. This study sought to evaluate the effectiveness of implementing modern cloud-based technology (lifeIMAGE) across a regional trauma system to reduce the incidence of re-CT imaging. This is a prospective interventional study to evaluate outcomes after implementation of lifeIMAGE in January 2012. Key outcomes were rates of CT imaging, including the rates and costs of re-CT from January 2009 through December 2012. There were 1,081 trauma patients transferred from participating hospitals during the study period (657 patients before and 425 patients after implementation), with the overall re-CT rate of 20.5%. Rates of any CT imaging at referring hospitals decreased (62% vs. 55%, p < 0.05) and also decreased at the accepting regional Level I center (58% vs. 52%, p < 0.05) following system implementation. There were 639 patients (59%) who had CT imaging performed before transfer (404 patients before and 235 patients after implementation). Of these patients, the overall re-CT rate decreased from 38.4% to 28.1% (p = 0.01). Rates of re-CT of the head (21% vs. 11%, p = 0.002), chest (7% vs. 3%, p = 0.05), as well as abdomen and pelvis (12% vs. 5%, p = 0.007) were significantly reduced following system implementation. The cost of repeat imaging per patient was significantly lower following system implementation (mean charges, $1,046 vs. $589; p < 0.001). These results were more pronounced in a subgroup of patients with an Injury Severity Score (ISS) of greater than 14, with a reduction in overall re-CT rate from 51% to 30% (p = 0.03). The implementation of modern cloud-based technology across the regional trauma system resulted in significant reductions in re-CT imaging and cost. Therapeutic/care management study, level IV; economic analysis, level IV.

Implementation of infants risk detection sensing system using IoT

NASA Astrophysics Data System (ADS)

Yang, Youseok; Lee, Taeo; Lee, Yechan; Choi, Jaehyeon; Park, Eunju; Lim, Hankyu

2017-06-01

Infants are vulnerable to surrounding environment and they receive large influence from even a small change. As their body composition is not complete yet, infants receive huge impact from small pressure. Small change can cause disease or even death of infants. This paper designed and implemented a risk-detection system for infants. In addition to the fundamental function of safety management system, the risk-detection system implemented in this paper in corporate child-caring function by using a variety of sensors.

A Web-based, secure, light weight clinical multimedia data capture and display system.

PubMed

Wang, S S; Starren, J

2000-01-01

Computer-based patient records are traditionally composed of textual data. Integration of multimedia data has been historically slow. Multimedia data such as image, audio, and video have been traditionally more difficult to handle. An implementation of a clinical system for multimedia data is discussed. The system implementation uses Java, Secure Socket Layer (SSL), and Oracle 8i. The system is on top of the Internet so it is architectural independent, cross-platform, cross-vendor, and secure. Design and implementations issues are discussed.

Public Health Information Systems: Priorities and Practices for Successful Deployments.

PubMed

Pearce, Martin

2016-01-01

A fast paced workshop designed for senior public health decision makers and clinical leaders implementing information systems to support delivery of public health programs. The tutorial will introduce public health information systems and provide best practices for implementing solutions related to immunization, communicable disease case management and outbreak management. Using a combination of formats, the tutorial will: • Highlight key functionality of public health information systems. • Review global crises currently exposing gaps and deficiencies in public health information. • Examine governance, planning, and implementation priorities. • Highlight considerations supporting implementations nationally and in special populations. • Provide real, actionable lessons learned to take away and apply in the real world.

The Design and Implementation of an Integrated Financial Control System.

ERIC Educational Resources Information Center

Alexander, George D.

1978-01-01

The design and implementation of an integrated financial control system at Clemson University are described. The advantages of considering the integration of systems to meet university-wide objectives as design criteria are discussed as well as sub-system relationships. (Author/BH)

An Implementation Model for Integrated Learning Systems.

ERIC Educational Resources Information Center

Mills, Steven C.; Ragan, Tillman R.

This paper describes the development, validation, and research application of the Computer-Delivered Instruction Configuration Matrix (CDICM), an instrument for evaluating the implementation of Integrated Learning Systems (ILS). The CDICM consists of a 15-item checklist, describing the major components of implementation of ILS technology, to be…

Implementing New Teacher Evaluation Systems: Principals' Concerns and Supervisor Support

ERIC Educational Resources Information Center

Derrington, Mary Lynne; Campbell, John W.

2015-01-01

Principal leadership is the key to successful implementation of mandated, high-accountability, teacher evaluation systems. Given the magnitude and complexity of change at the school level, understanding principals' perceptions, responses, and concerns is essential for effective change and support during implementation. Thus, research that…

Implementing a frame representation in CLIPS/COOL

NASA Technical Reports Server (NTRS)

Myers, Leonard; Snyder, James

1991-01-01

An implementation is described and evaluated of frames in COOL. The test case is a frame based semantic network previously implemented in CLIPS (C Language Integrated Production System) Version 4.3 as part of the Intelligent Computer Aided Design System (ICADS) and reported at the first CLIPS conference.

Actualizing a provider alliance to expand health services access to a low-income urban community.

PubMed

Tataw, David; Bazargan-Hejazi, Shahrzad; James, Frederick W

2011-01-01

Social change to facilitate health care access for vulnerable populations sometimes involves model-driven innovative structures and innovative planning and implementation approaches. This paper described and analyzed the rationale, conceptual framework, program components, and implementation of the South Central Health Care Alliance (SCHCA) implemented in South Los Angeles from January 2002 to December 2004. The program development and implementation was guided by an integrated framework linking the Open Systems Theory, the Social Cognitive Theory, the Health Belief Model, and the Preventive Health Education and Medical Home Project. The performance of the SCHCA as a social system, partnership, and participatory implementation program is also presented. While the SCHCA was found to be a dynamic social system that responded well to contingencies, its performance as a partnership and participatory implementation program was wanting in many respects.

Multidisciplinary approach to successful implementation of production information system (PRISM)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shariff, M.R.; Gopalakrishnan, S.G.; Francis, N.

1995-12-31

A company wide corporate and regional production database supporting all production areas was envisaged critical to the current expansion within Petronas Carigali Sdn Bhd (PCSB). A multi disciplinary project team was thus formed to analyze the requirements prior to developing, testing, implementing and training users. PCSB has currently evolved into a mature E & P company on par with other E & P companies within the region. This expansion necessitates a common Production Information System for the efficient dissemination of vital Production Information for Production Surveillance, Reservoir Management, Reserve Assessment, Special Studies and Standardized Group-wide Reporting. This paper will discussmore » all the phases involved in the project which includes Systems Requirement Study, Data Migration, System Development, System Implementation and Post-Implementation Plan.« less

A Rule-Based System Implementing a Method for Translating FOL Formulas into NL Sentences

NASA Astrophysics Data System (ADS)

Mpagouli, Aikaterini; Hatzilygeroudis, Ioannis

In this paper, we mainly present the implementation of a system that translates first order logic (FOL) formulas into natural language (NL) sentences. The motivation comes from an intelligent tutoring system teaching logic as a knowledge representation language, where it is used as a means for feedback to the students-users. FOL to NL conversion is achieved by using a rule-based approach, where we exploit the pattern matching capabilities of rules. So, the system consists of rule-based modules corresponding to the phases of our translation methodology. Facts are used in a lexicon providing lexical and grammatical information that helps in producing the NL sentences. The whole system is implemented in Jess, a java-implemented rule-based programming tool. Experimental results confirm the success of our choices.

Factors Affecting Successful Implementation of Hospital Information Systems.

PubMed

Farzandipur, Mehrdad; Jeddi, Fatemeh Rangraz; Azimi, Esmaeil

2016-02-01

Today, the use of information systems in health environments, like any other fields, is necessary and organizational managers are convinced to use these systems. However, managers' satisfaction is not the only factor in successfully implementing these systems and failed information technology projects (IT) are reported despite the consent of the directors. Therefore, this study aims to determine the factors affecting the successful implementation of a hospital information system. The study was carried out as a descriptive method in 20 clinical hospitals that the hospital information system (HIS) was conducted in them. The clinical and paraclinical users of mentioned hospitals are the study group. 400 people were chosen as samples in scientific method and the data was collected using a questionnaire consisted of three main human, managerial and organizational, and technological factors, by questionnaire and interview. Then the data was scored in Likert scale (score of 1 to 5) and were analyzed using the SPSS software. About 75 percent of the population were female, with average work experience of 10 years and the mean age was 30 years. The human factors affecting the success of hospital information system implementation achieved the mean score of 3.5, both organizational and managerial factors 2.9 and technological factors the mean of 3. Human factors including computer skills, perceiving usefulness and perceiving the ease of a hospital information system use are more effective on the acceptance and successful implementation of hospital information systems; then the technological factors play a greater role. It is recommended that for the successful implementation of hospital information systems, most of these factors to be considered.

Requirements for guidelines systems: implementation challenges and lessons from existing software-engineering efforts.

PubMed

Shah, Hemant; Allard, Raymond D; Enberg, Robert; Krishnan, Ganesh; Williams, Patricia; Nadkarni, Prakash M

2012-03-09

A large body of work in the clinical guidelines field has identified requirements for guideline systems, but there are formidable challenges in translating such requirements into production-quality systems that can be used in routine patient care. Detailed analysis of requirements from an implementation perspective can be useful in helping define sub-requirements to the point where they are implementable. Further, additional requirements emerge as a result of such analysis. During such an analysis, study of examples of existing, software-engineering efforts in non-biomedical fields can provide useful signposts to the implementer of a clinical guideline system. In addition to requirements described by guideline-system authors, comparative reviews of such systems, and publications discussing information needs for guideline systems and clinical decision support systems in general, we have incorporated additional requirements related to production-system robustness and functionality from publications in the business workflow domain, in addition to drawing on our own experience in the development of the Proteus guideline system (http://proteme.org). The sub-requirements are discussed by conveniently grouping them into the categories used by the review of Isern and Moreno 2008. We cite previous work under each category and then provide sub-requirements under each category, and provide example of similar work in software-engineering efforts that have addressed a similar problem in a non-biomedical context. When analyzing requirements from the implementation viewpoint, knowledge of successes and failures in related software-engineering efforts can guide implementers in the choice of effective design and development strategies.

Requirements for guidelines systems: implementation challenges and lessons from existing software-engineering efforts

PubMed Central

2012-01-01

Background A large body of work in the clinical guidelines field has identified requirements for guideline systems, but there are formidable challenges in translating such requirements into production-quality systems that can be used in routine patient care. Detailed analysis of requirements from an implementation perspective can be useful in helping define sub-requirements to the point where they are implementable. Further, additional requirements emerge as a result of such analysis. During such an analysis, study of examples of existing, software-engineering efforts in non-biomedical fields can provide useful signposts to the implementer of a clinical guideline system. Methods In addition to requirements described by guideline-system authors, comparative reviews of such systems, and publications discussing information needs for guideline systems and clinical decision support systems in general, we have incorporated additional requirements related to production-system robustness and functionality from publications in the business workflow domain, in addition to drawing on our own experience in the development of the Proteus guideline system (http://proteme.org). Results The sub-requirements are discussed by conveniently grouping them into the categories used by the review of Isern and Moreno 2008. We cite previous work under each category and then provide sub-requirements under each category, and provide example of similar work in software-engineering efforts that have addressed a similar problem in a non-biomedical context. Conclusions When analyzing requirements from the implementation viewpoint, knowledge of successes and failures in related software-engineering efforts can guide implementers in the choice of effective design and development strategies. PMID:22405400

Development and implementation of a web-based system to study children with malnutrition.

PubMed

Syed-Mohamad, Sharifah-Mastura

2009-01-01

To develop and implement a collective web-based system to monitor child growth in order to study children with malnutrition. The system was developed using prototyping system development methodology. The implementation was carried out using open-source technologies that include Apache Web Server, PHP scripting, and MySQL database management system. There were four datasets collected by the system: demographic data, measurement data, parent data, and food program data. The system was designed to be used by two groups of users, the clinics and the researchers. The Growth Monitor System was successfully developed and used for the study, "Geoinformation System (GIS) and Remote Sensing in Mapping of Children with Malnutrition." Data collection was implemented in public clinics from two districts in the state of Kelantan, Malaysia. The development of an integrated web-based system, Growth Monitor, for the study of children with malnutrition has been achieved. This system can be expanded to new partners who are involved in the study of children with malnutrition in other parts of Malaysia as well as other countries.

Tank waste remediation system immobilized high-level waste storage project configuration management implementation plan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Burgard, K.G.

This Configuration Management Implementation Plan was developed to assist in the management of systems, structures, and components, to facilitate the effective control and statusing of changes to systems, structures, and components; and to ensure technical consistency between design, performance, and operational requirements. Its purpose is to describe the approach Project W-464 will take in implementing a configuration management control, to determine the rigor of control, and to identify the mechanisms for imposing that control.This Configuration Management Implementation Plan was developed to assist in the management of systems, structures, and components, to facilitate the effective control and statusing of changes tomore » systems, structures, and components; and to ensure technical consistency between design, performance, and operational requirements. Its purpose is to describe the approach Project W-464 will take in implementing a configuration management control, to determine the rigor of control, and to identify the mechanisms for imposing that control.« less

[Approaches to development and implementation of the medical information system for military-medical commission of the multidisciplinary military-medical organisation].

PubMed

Kuvshinov, K E; Klipak, V M; Chaplyuk, A L; Moskovko, V M; Belyshev, D V; Zherebko, O A

2015-06-01

The current task of the implementation of medical information systems in the military and medical organizations is an automation of the military-medical expertise as one of the most important activities. In this regard, noteworthy experience of the 9th Medical Diagnostic Centre (9th MDC), where on the basis of medical information system "Interi PROMIS" for the first time was implemented the automation of the work of military medical commission. The given paper presents an algorithm for constructing of the information system for the military-medical examination; detailed description of its elements is given. According to military servicemen the implementation of the Military Medical Commission (MMC) subsystem of the medical information system implemented into the 9th MDC has reduced the time required for the MMC and paperwork, greatly facilitate the work of physicians and medical specialists on military servicemen examination. This software can be widely applied in ambulatory and hospital practice, especially in case of mass military-medical examinations.

A review of the National pharmacovigilance system in Malta - implementing and operating a pharmacovigilance management system.

PubMed

Tanti, Amy; Micallef, Benjamin; Serracino-Inglott, Anthony; Borg, John-Joseph

2017-01-01

Regulatory authorities have a legal mandate to implement and maintain a Pharmacovigilance System designed to monitor the safety of authorised medicinal products and detect any change to their risk-benefit balance. Areas covered: This review maps the implementation of pharmacovigilance activities in Malta since accession in the EU in mid 2004 and discusses the challenges the Maltese Regulator encountered while setting up adequate and effective systems to fulfil its legal mandate. Areas reviewed are those around ADR reporting, promotion and safety communications including rapid alerts and recalls, direct healthcare professional communications, risk minimisation measures and safety circulars and quality systems. Expert opinion: Within a ten year period, 3 EU directives on pharmacovigilance were implemented by our agency. Despite limitations to resources, based on a prioritised implementation, the legislation provisions are now fully operational with a good level of sustainability. Lessons learnt from this process are discussed in this review. The coming years will involve strengthening and consolidation of existing processes.

Review: evaluating information systems in nursing.

PubMed

Oroviogoicoechea, Cristina; Elliott, Barbara; Watson, Roger

2008-03-01

To review existing nursing research on inpatient hospitals' information technology (IT) systems in order to explore new approaches for evaluation research on nursing informatics to guide further design and implementation of effective IT systems. There has been an increase in the use of IT and information systems in nursing in recent years. However, there has been little evaluation of these systems and little guidance on how they might be evaluated. A literature review was conducted between 1995 and 2005 inclusive using CINAHL and Medline and the search terms 'nursing information systems', 'clinical information systems', 'hospital information systems', 'documentation', 'nursing records', 'charting'. Research in nursing information systems was analysed and some deficiencies and contradictory results were identified which impede a comprehensive understanding of effective implementation. There is a need for IT systems to be understood from a wider perspective that includes aspects related to the context where they are implemented. Social and organizational aspects need to be considered in evaluation studies and realistic evaluation can provide a framework for the evaluation of information systems in nursing. The rapid introduction of IT systems for clinical practice urges evaluation of already implemented systems examining how and in what circumstances they work to guide effective further development and implementation of IT systems to enhance clinical practice. Evaluation involves more factors than just involving technologies such as changing attitudes, cultures and healthcare practices. Realistic evaluation could provide configurations of context-mechanism-outcomes that explain the underlying relationships to understand why and how a programme or intervention works.

Interagency Collaborative Team Model for Capacity Building to Scale-Up Evidence-Based Practice

PubMed Central

Hurlburt, Michael; Aarons, Gregory A; Fettes, Danielle; Willging, Cathleen; Gunderson, Lara; Chaffin, Mark J

2015-01-01

Background System-wide scale up of evidence-based practice (EBP) is a complex process. Yet, few strategic approaches exist to support EBP implementation and sustainment across a service system. Building on the Exploration, Preparation, Implementation, and Sustainment (EPIS) implementation framework, we developed and are testing the Interagency Collaborative Team (ICT) process model to implement an evidence-based child neglect intervention (i.e., SafeCare®) within a large children’s service system. The ICT model emphasizes the role of local agency collaborations in creating structural supports for successful implementation. Methods We describe the ICT model and present preliminary qualitative results from use of the implementation model in one large scale EBP implementation. Qualitative interviews were conducted to assess challenges in building system, organization, and home visitor collaboration and capacity to implement the EBP. Data collection and analysis centered on EBP implementation issues, as well as the experiences of home visitors under the ICT model. Results Six notable issues relating to implementation process emerged from participant interviews, including: (a) initial commitment and collaboration among stakeholders, (b) leadership, (c) communication, (d) practice fit with local context, (e) ongoing negotiation and problem solving, and (f) early successes. These issues highlight strengths and areas for development in the ICT model. Conclusions Use of the ICT model led to sustained and widespread use of SafeCare in one large county. Although some aspects of the implementation model may benefit from enhancement, qualitative findings suggest that the ICT process generates strong structural supports for implementation and creates conditions in which tensions between EBP structure and local contextual variations can be resolved in ways that support the expansion and maintenance of an EBP while preserving potential for public health benefit. PMID:27512239

Interagency Collaborative Team Model for Capacity Building to Scale-Up Evidence-Based Practice.

PubMed

Hurlburt, Michael; Aarons, Gregory A; Fettes, Danielle; Willging, Cathleen; Gunderson, Lara; Chaffin, Mark J

2014-04-01

System-wide scale up of evidence-based practice (EBP) is a complex process. Yet, few strategic approaches exist to support EBP implementation and sustainment across a service system. Building on the Exploration, Preparation, Implementation, and Sustainment (EPIS) implementation framework, we developed and are testing the Interagency Collaborative Team (ICT) process model to implement an evidence-based child neglect intervention (i.e., SafeCare®) within a large children's service system. The ICT model emphasizes the role of local agency collaborations in creating structural supports for successful implementation. We describe the ICT model and present preliminary qualitative results from use of the implementation model in one large scale EBP implementation. Qualitative interviews were conducted to assess challenges in building system, organization, and home visitor collaboration and capacity to implement the EBP. Data collection and analysis centered on EBP implementation issues, as well as the experiences of home visitors under the ICT model. Six notable issues relating to implementation process emerged from participant interviews, including: (a) initial commitment and collaboration among stakeholders, (b) leadership, (c) communication, (d) practice fit with local context, (e) ongoing negotiation and problem solving, and (f) early successes. These issues highlight strengths and areas for development in the ICT model. Use of the ICT model led to sustained and widespread use of SafeCare in one large county. Although some aspects of the implementation model may benefit from enhancement, qualitative findings suggest that the ICT process generates strong structural supports for implementation and creates conditions in which tensions between EBP structure and local contextual variations can be resolved in ways that support the expansion and maintenance of an EBP while preserving potential for public health benefit.

Design and Analysis of Architectures for Structural Health Monitoring Systems

NASA Technical Reports Server (NTRS)

Mukkamala, Ravi; Sixto, S. L. (Technical Monitor)

2002-01-01

During the two-year project period, we have worked on several aspects of Health Usage and Monitoring Systems for structural health monitoring. In particular, we have made contributions in the following areas. 1. Reference HUMS architecture: We developed a high-level architecture for health monitoring and usage systems (HUMS). The proposed reference architecture is shown. It is compatible with the Generic Open Architecture (GOA) proposed as a standard for avionics systems. 2. HUMS kernel: One of the critical layers of HUMS reference architecture is the HUMS kernel. We developed a detailed design of a kernel to implement the high level architecture.3. Prototype implementation of HUMS kernel: We have implemented a preliminary version of the HUMS kernel on a Unix platform.We have implemented both a centralized system version and a distributed version. 4. SCRAMNet and HUMS: SCRAMNet (Shared Common Random Access Memory Network) is a system that is found to be suitable to implement HUMS. For this reason, we have conducted a simulation study to determine its stability in handling the input data rates in HUMS. 5. Architectural specification.

Implementation of the Performance Management System (PMS) in Senior Secondary Schools in Botswana: An Investigation of Senior Management Team's Expected Benefits of the PMS

ERIC Educational Resources Information Center

Bulawa, Philip

2012-01-01

Different forms of the performance management system have been implemented in many countries for some years. As in other countries, in 1999 the government of Botswana took a decision to implement a performance management system (PMS) across the entire public service including schools. The government explained the purpose for which this reform was…

Implementation of an Intelligent Control System

DTIC Science & Technology

1992-05-01

there- fore implemented in a portable equipment rack. The controls computer consists of a microcomputer running a real time operating system , interface...circuit boards are mounted in an industry standard Multibus I chassis. The microcomputer runs the iRMX real time operating system . This operating system

The Microcomputer in the Library: VI. Implementation and Future Development.

ERIC Educational Resources Information Center

Leggate, Peter; Dyer, Hilary

1986-01-01

This sixth article in a series discusses planning for the installation and implementation of automated systems in the library, workstation design and location, scheduling of software implementation, security, data input, staff and reader training, job design, impact of automation on library procedures, evaluation of system performance, and future…

On the question of the necessity of implementation of automatic control systems in timber industry

NASA Astrophysics Data System (ADS)

Khasanov, E. R.; Zelenkov, P. V.; Petrosyan, M. O.; Murygin, A. V.; Laptenor, V. D.

2016-04-01

The paper considers the necessity of implementation of automatic control systems on the level of forest farms management and timber industry. Main areas of activity, which currently subjected to automation, are revealed. Objectives, which solved by implementation of APCS, are identified.

ERP Project Management Lessons Learned

ERIC Educational Resources Information Center

Carroll, Timothy D.

2009-01-01

Implementing an enterprise resource planning (ERP) system is a major undertaking for any higher education institution, with many challenges along the way. More than three years ago, Roane State Community College began a journey to implement an ERP system. Roane State recently completed a very successful implementation of the SunGard Banner Student…

An Integrated Approach to Disability Policy Development, Implementation, and Evaluation

ERIC Educational Resources Information Center

Shogren, Karrie A.; Luckasson, Ruth; Schalock, Robert L.

2017-01-01

This article provides a framework for an integrated approach to disability policy development, implementation, and evaluation. The article discusses how a framework that combines systems thinking and valued outcomes can be used by coalition partners across ecological systems to implement disability policy, promote the effective use of resources,…

3 CFR - Demonstration Grants for the Development, Implementation, and Evaluation of Alternatives to the...

Code of Federal Regulations, 2010 CFR

2010-01-01

..., Implementation, and Evaluation of Alternatives to the Current Medical Liability System Presidential Documents..., Implementation, and Evaluation of Alternatives to the Current Medical Liability System Memorandum for the... report that fear of lawsuits leads them to practice defensive medicine, which may contribute to higher...

Practicing Technology Implementation: The Case of an Enterprise System

ERIC Educational Resources Information Center

Awazu, Yukika

2013-01-01

Drawing on four theories of practice--Communities of Practice (CoP), Bourdieu's theory of practice, Pickering's mangle of practice, and Actor Network Theory (ANT), the study provides an in-depth understanding about technology implementation practice. Analysis of an Enterprise System implementation project in a software manufacturing…

Implementing an Antibiotic Stewardship Information System to Improve Hospital Infection Control: A Co-Design Process.

PubMed

Maia, Mélanie R; Simões, Alexandra; Lapão, Luís V

2018-01-01

HAITooL information system design and implementation was based on Design Science Research Methodology, ensuring full participation, in close collaboration, of researchers and a multidisciplinary team of healthcare professionals. HAITooL enables effective monitoring of antibiotic resistance, antibiotic use and provides an antibiotic prescription decision-supporting system by clinicians, strengthening the patient safety procedures. The design, development and implementation process reveals benefits in organizational and behavior change with significant success. Leadership commitment multidisciplinary team and mainly informaticians engagement was crucial to the implementation process. Participants' motivation and the final product delivery and evolution depends on that.

Health system strengthening: a qualitative evaluation of implementation experience and lessons learned across five African countries.

PubMed

Rwabukwisi, Felix Cyamatare; Bawah, Ayaga A; Gimbel, Sarah; Phillips, James F; Mutale, Wilbroad; Drobac, Peter

2017-12-21

Achieving the United Nations Sustainable Development Goals in sub-Saharan Africa will require substantial improvements in the coverage and performance of primary health care delivery systems. Projects supported by the Doris Duke Charitable Foundation's (DDCF) African Health Initiative (AHI) created public-private-academic and community partnerships in five African countries to implement and evaluate district-level health system strengthening interventions. In this study, we captured common implementation experiences and lessons learned to understand core elements of successful health systems interventions. We used qualitative data from key informant interviews and annual progress reports from the five Population Health Implementation and Training (PHIT) partnership projects funded through AHI in Ghana, Mozambique, Rwanda, Tanzania, and Zambia. Four major overarching lessons were highlighted. First, variety and inclusiveness of concerned key players (public, academic and private) are necessary to address complex health system issues at all levels. Second, a learning culture that promotes evidence creation and ability to efficiently adapt were key in order to meet changing contextual needs. Third, inclusion of strong implementation science tools and strategies allowed informed and measured learning processes and efficient dissemination of best practices. Fourth, five to seven years was the minimum time frame necessary to effectively implement complex health system strengthening interventions and generate the evidence base needed to advocate for sustainable change for the PHIT partnership projects. The AHI experience has raised remaining, if not overlooked, challenges and potential solutions to address complex health systems strengthening intervention designs and implementation issues, while aiming to measurably accomplish sustainable positive change in dynamic, learning, and varied contexts.

The Cancer Prevention and Control Research Network: An Interactive Systems Approach to Advancing Cancer Control Implementation Research and Practice

PubMed Central

Fernández, María E.; Melvin, Cathy L.; Leeman, Jennifer; Ribisl, Kurt M.; Allen, Jennifer D.; Kegler, Michelle C.; Bastani, Roshan; Ory, Marcia G.; Risendal, Betsy C.; Hannon, Peggy A.; Kreuter, Matthew W.; Hebert, James R.

2018-01-01

Background Although cancer research has advanced at a rapid pace, a gap remains between what is known about how to improve cancer prevention and control (CPC) and what is implemented as best practices within health care systems and communities. The Cancer Prevention and Control Research Network (CPCRN), with more than 10 years of dissemination and implementation research experience, aims to accelerate the uptake and use of evidence-based CPC interventions. Methods The collective work of the CPCRN has facilitated the analysis and categorization of research and implementation efforts according to the Interactive Systems Framework for Dissemination and Implementation (ISF), providing a useful heuristic for bridging the gap between prevention research and practice. The ISF authors have called for examples of its application as input to help refine the model. Results We provide examples of how the collaborative activities supported by the CPCRN, using community-engaged processes, accelerated the synthesis and translation of evidence, built both general and innovation-specific capacity, and worked with delivery systems to advance cancer control research and practice. Conclusions The work of the CPCRN has provided real-world examples of the application of the ISF and demonstrated that synthesizing and translating evidence can increase the potential that evidence-based CPC programs will be used and that capacity building for both the support system and the delivery system is crucial for the successful implementation and maintenance of evidence-based cancer control. Impact Adoption and implementation of CPC can be enhanced by better understanding ISF systems and intervening to improve them. PMID:25155759

The effect of organized systems of trauma care on motor vehicle crash mortality.

PubMed

Nathens, A B; Jurkovich, G J; Cummings, P; Rivara, F P; Maier, R V

2000-04-19

Despite calls for wider national implementation of an integrated approach to trauma care, the effectiveness of this approach at a regional or state level remains unproven. To determine whether implementation of an organized system of trauma care reduces mortality due to motor vehicle crashes. Cross-sectional time-series analysis of crash mortality data collected for 1979 through 1995 from the Fatality Analysis Reporting System. All 50 US states and the District of Columbia. All front-seat passenger vehicle occupants aged 15 to 74 years. Rates of death due to motor vehicle crashes compared before and after implementation of an organized trauma care system. Estimates are based on within-state comparisons adjusted for national trends in crash mortality. Ten years following initial trauma system implementation, mortality due to traffic crashes began to decline; about 15 years following trauma system implementation, mortality was reduced by 8% (95% confidence interval [CI], 3%-12%) after adjusting for secular trends in crash mortality, age, and the introduction of traffic safety laws. Implementation of primary enforcement of restraint laws and laws deterring drunk driving resulted in reductions in crash mortality of 13% (95% CI, 11%-16%) and 5% (95% CI, 3%-7%), respectively, while relaxation of state speed limits increased mortality by 7% (95% CI, 3%-10%). Our data indicate that implementation of an organized system of trauma care reduces crash mortality. The effect does not appear for 10 years, a finding consistent with the maturation and development of trauma triage protocols, interhospital transfer agreements, organization of trauma centers, and ongoing quality assurance.

Design and implementation of an audit trail in compliance with US regulations.

PubMed

Jiang, Keyuan; Cao, Xiang

2011-10-01

Audit trails have been used widely to ensure quality of study data and have been implemented in computerized clinical trials data systems. Increasingly, there is a need to audit access to study participant identifiable information to provide assurance that study participant privacy is protected and confidentiality is maintained. In the United States, several federal regulations specify how the audit trail function should be implemented. To describe the development and implementation of a comprehensive audit trail system that meets the regulatory requirements of assuring data quality and integrity and protecting participant privacy and that is also easy to implement and maintain. The audit trail system was designed and developed after we examined regulatory requirements, data access methods, prevailing application architecture, and good security practices. Our comprehensive audit trail system was developed and implemented at the database level using a commercially available database management software product. It captures both data access and data changes with the correct user identifier. Documentation of access is initiated automatically in response to either data retrieval or data change at the database level. Currently, our system has been implemented only on one commercial database management system. Although our audit trail algorithm does not allow for logging aggregate operations, aggregation does not reveal sensitive private participant information. Careful consideration must be given to data items selected for monitoring because selection of all data items using our system can dramatically increase the requirements for computer disk space. Evaluating the criticality and sensitivity of individual data items selected can control the storage requirements for clinical trial audit trail records. Our audit trail system is capable of logging data access and data change operations to satisfy regulatory requirements. Our approach is applicable to virtually any data that can be stored in a relational database.

A Multi-Level Examination of Stakeholder Perspectives of Implementation of Evidence-Based Practices in a Large Urban Publicly-Funded Mental Health System

PubMed Central

Beidas, Rinad S.; Stewart, Rebecca E.; Adams, Danielle R.; Fernandez, Tara; Lustbader, Susanna; Powell, Byron J.; Aarons, Gregory; Hoagwood, Kimberly E.; Evans, Arthur C.; Hurford, Matthew O.; Rubin, Ronnie; Hadley, Trevor; Mandell, David; Barg, Frances

2015-01-01

Our goal was to identify barriers and facilitators to the implementation of evidence-based practices from the perspectives of multiple stakeholders in a large publicly funded mental health system. We completed 56 interviews with three stakeholder groups: treatment developers (n = 7), agency administrators (n = 33), and system leadership (n = 16). The three stakeholder groups converged on the importance of inner (e.g., agency competing resources and demands, therapist educational background) and outer context (e.g., funding) factors as barriers to implementation. Potential threats to implementation and sustainability included the fiscal landscape of community mental health clinics and an evolving workforce. Intervention characteristics were rarely endorsed as barriers. Inner context, outer context, and intervention characteristics were all seen as important facilitators. All stakeholders endorsed the importance of coordinated collaboration across stakeholder groups within the system to successfully implement evidence-based practices. PMID:26658692

Adaptation and Implementation of a Science-Based Prevention System in Colombia: Challenges and Achievements

PubMed Central

Pérez-Gómez, Augusto; Mejía-Trujillo, Juliana; Brown, Eric C.; Eisenberg, Nicole

2016-01-01

During the last 2 years, the Colombian government and the Nuevos Rumbos Corporation have been implementing an adapted version of the Communities That Care (CTC) prevention system, called Comunidades Que se Cuidan (CQC) in Spanish, for use in Colombia. This brief report presents the process of implementing CQC and identifies some of the main challenges and achievements of implementing the system in eight communities in Colombia. Preliminary results of a pilot study of CQC implementation in Colombia show that prevention system development, including a focus on measuring community risk and protection, can be established successfully in Latin American communities despite a lack of rigorously tested prevention programs and strategies. Moreover, mobilizing community coalitions toward science-based prevention, with a focus on examining local risk and protective factor data, can spur development and evaluation of prevention efforts in Latin America. PMID:28154437

An XML-based system for the flexible classification and retrieval of clinical practice guidelines.

PubMed Central

Ganslandt, T.; Mueller, M. L.; Krieglstein, C. F.; Senninger, N.; Prokosch, H. U.

2002-01-01

Beneficial effects of clinical practice guidelines (CPGs) have not yet reached expectations due to limited routine adoption. Electronic distribution and reminder systems have the potential to overcome implementation barriers. Existing electronic CPG repositories like the National Guideline Clearinghouse (NGC) provide individual access but lack standardized computer-readable interfaces necessary for automated guideline retrieval. The aim of this paper was to facilitate automated context-based selection and presentation of CPGs. Using attributes from the NGC classification scheme, an XML-based metadata repository was successfully implemented, providing document storage, classification and retrieval functionality. Semi-automated extraction of attributes was implemented for the import of XML guideline documents using XPath. A hospital information system interface was exemplarily implemented for diagnosis-based guideline invocation. Limitations of the implemented system are discussed and possible future work is outlined. Integration of standardized computer-readable search interfaces into existing CPG repositories is proposed. PMID:12463831

A Model for Communications Satellite System Architecture Assessment

DTIC Science & Technology

2011-09-01

This is shown in Equation 4. The total system cost includes all development, acquisition, fielding, operations, maintenance and upgrades, and system...protection. A mathematical model was implemented to enable the analysis of communications satellite system architectures based on multiple system... implemented to enable the analysis of communications satellite system architectures based on multiple system attributes. Utilization of the model in

Implementing Obstetric Early Warning Systems.

PubMed

Friedman, Alexander M; Campbell, Mary L; Kline, Carolyn R; Wiesner, Suzanne; D'Alton, Mary E; Shields, Laurence E

2018-04-01

Severe maternal morbidity and mortality are often preventable and obstetric early warning systems that alert care providers of potential impending critical illness may improve maternal safety. While literature on outcomes and test characteristics of maternal early warning systems is evolving, there is limited guidance on implementation. Given current interest in early warning systems and their potential role in care, the 2017 Society for Maternal-Fetal Medicine (SMFM) Annual Meeting dedicated a session to exploring early warning implementation across a wide range of hospital settings. This manuscript reports on key points from this session. While implementation experiences varied based on factors specific to individual sites, common themes relevant to all hospitals presenting were identified. Successful implementation of early warnings systems requires administrative and leadership support, dedication of resources, improved coordination between nurses, providers, and ancillary staff, optimization of information technology, effective education, evaluation of and change in hospital culture and practices, and support in provider decision-making. Evolving data on outcomes on early warning systems suggest that maternal risk may be reduced. To effectively reduce maternal, risk early warning systems that capture deterioration from a broad range of conditions may be required in addition to bundles tailored to specific conditions such as hemorrhage, thromboembolism, and hypertension.

Time Triggered Protocol (TTP) for Integrated Modular Avionics

NASA Technical Reports Server (NTRS)

Motzet, Guenter; Gwaltney, David A.; Bauer, Guenther; Jakovljevic, Mirko; Gagea, Leonard

2006-01-01

Traditional avionics computing systems are federated, with each system provided on a number of dedicated hardware units. Federated applications are physically separated from one another and analysis of the systems is undertaken individually. Integrated Modular Avionics (IMA) takes these federated functions and integrates them on a common computing platform in a tightly deterministic distributed real-time network of computing modules in which the different applications can run. IMA supports different levels of criticality in the same computing resource and provides a platform for implementation of fault tolerance through hardware and application redundancy. Modular implementation has distinct benefits in design, testing and system maintainability. This paper covers the requirements for fault tolerant bus systems used to provide reliable communication between IMA computing modules. An overview of the Time Triggered Protocol (TTP) specification and implementation as a reliable solution for IMA systems is presented. Application examples in aircraft avionics and a development system for future space application are covered. The commercially available TTP controller can be also be implemented in an FPGA and the results from implementation studies are covered. Finally future direction for the application of TTP and related development activities are presented.

Health information systems: a survey of frameworks for developing countries.

PubMed

Marcelo, A B

2010-01-01

The objective of this paper is to perform a survey of excellent research on health information systems (HIS) analysis and design, and their underlying theoretical frameworks. It classifies these frameworks along major themes, and analyzes the different approaches to HIS development that are practical in resource-constrained environments. Literature review based on PubMed citations and conference proceedings, as well as Internet searches on information systems in general, and health information systems in particular. The field of health information systems development has been studied extensively. Despite this, failed implementations are still common. Theoretical frameworks for HIS development are available that can guide implementers. As awareness, acceptance, and demand for health information systems increase globally, the variety of approaches and strategies will also follow. For developing countries with scarce resources, a trial-and-error approach can be very costly. Lessons from the successes and failures of initial HIS implementations have been abstracted into theoretical frameworks. These frameworks organize complex HIS concepts into methodologies that standardize techniques in implementation. As globalization continues to impact healthcare in the developing world, demand for more responsive health systems will become urgent. More comprehensive frameworks and practical tools to guide HIS implementers will be imperative.

Systems Analysis of Rapid Transit Underground Construction : Volume 1. Sections 1-5.

DOT National Transportation Integrated Search

1974-12-01

This study describes rapid transit system implementation, design, and construction procedures. The relationships and responsibilities of governmental, private, and public groups involved in planning and implementing an urban rapid transit system are ...

Overcoming barriers to electronic medical record (EMR) implementation in the US healthcare system: A comparative study.

PubMed

Kumar, Sameer; Aldrich, Krista

2010-12-01

An EMR system implementation would significantly reduce clinician workload and medical errors while saving the US healthcare system major expense. Yet, compared to other developed nations, the US lags behind. This article examines EMR system efforts, benefits, and barriers, as well as steps needed to move the US closer to a nationwide EMR system. The analysis includes a blueprint for implementation of EMR, industry comparisons to highlight the differences between successful and non-successful EMR ventures, references to costs and benefit information, and identification of root causes. 'Poka-yokes' (avoid (yokeru) mistakes (poka)) will be inserted to provide insight into how to systematically overcome challenges. Implementation will require upfront costs including patient privacy that must be addressed early in the development process. Government structure, incentives and mandates are required for nationwide EMR system in the US.

A cloud-based X73 ubiquitous mobile healthcare system: design and implementation.

PubMed

Ji, Zhanlin; Ganchev, Ivan; O'Droma, Máirtín; Zhang, Xin; Zhang, Xueji

2014-01-01

Based on the user-centric paradigm for next generation networks, this paper describes a ubiquitous mobile healthcare (uHealth) system based on the ISO/IEEE 11073 personal health data (PHD) standards (X73) and cloud computing techniques. A number of design issues associated with the system implementation are outlined. The system includes a middleware on the user side, providing a plug-and-play environment for heterogeneous wireless sensors and mobile terminals utilizing different communication protocols and a distributed "big data" processing subsystem in the cloud. The design and implementation of this system are envisaged as an efficient solution for the next generation of uHealth systems.

Digital telephony analysis model and issues

NASA Astrophysics Data System (ADS)

Keuthan, Lynn M.

1995-09-01

Experts in the fields of digital telephony and communications security have stated the need for an analytical tool for evaluating complex issues. Some important policy issues discussed by experts recently include implementing digital wire-taps, implementation of the 'Clipper Chip', required registration of encryption/decryption keys, and export control of cryptographic equipment. Associated with the implementation of these policies are direct costs resulting from implementation, indirect cost benefits from implementation, and indirect costs resulting from the risks of implementation or factors reducing cost benefits. Presented herein is a model for analyzing digital telephony policies and systems and their associated direct costs and indirect benefit and risk factors. In order to present the structure of the model, issues of national importance and business-related issues are discussed. The various factors impacting the implementation of the associated communications systems and communications security are summarized, and various implementation tradeoffs are compared based on economic benefits/impact. The importance of the issues addressed herein, as well as other digital telephony issues, has greatly increased with the enormous increases in communication system connectivity due to the advance of the National Information Infrastructure.

Appendix N. Implementation of the RUPS System in a Total School District.

ERIC Educational Resources Information Center

Jung, Charles; And Others

The implementation in a school district of the Research Utilization and Problem Solving (RUPS) System is demonstrated. RUPS is an instructional system for an inservice program designed to provide the needed competencies for an entire staff to engage in systems analysis and systems synthesis procedures prior to assessing educational needs and…

Resource Consumption of a Diffusion Model for Prevention Programs: The PROSPER Delivery System

PubMed Central

Crowley, Daniel M.; Jones, Damon E.; Greenberg, Mark T.; Feinberg, Mark E.; Spoth, Richard L.

2012-01-01

Purpose To prepare public systems to implement evidence-based prevention programs for adolescents, it is necessary to have accurate estimates of programs’ resource consumption. When evidence-based programs are implemented through a specialized prevention delivery system, additional costs may be incurred during cultivation of the delivery infrastructure. Currently, there is limited research on the resource consumption of such delivery systems and programs. In this article, we describe the resource consumption of implementing the PROSPER (PROmoting School–Community–University Partnerships to Enhance Resilience) delivery system for a period of 5 years in one state, and how the financial and economic costs of its implementation affect local communities as well as the Cooperative Extension and University systems. Methods We used a six-step framework for conducting cost analysis, using a Cost–Procedure–Process–Outcome Analysis model (Yates, Analyzing costs, procedures, processes, and outcomes in human services: An introduction, 1996; Yates, 2009). This method entails defining the delivery System; bounding cost parameters; identifying, quantifying, and valuing systemic resource Consumption, and conducting sensitivity analysis of the cost estimates. Results Our analyses estimated both the financial and economic costs of the PROSPER delivery system. Evaluation of PROSPER illustrated how costs vary over time depending on the primacy of certain activities (e.g., team development, facilitator training, program implementation). Additionally, this work describes how the PROSPER model cultivates a complex resource infrastructure and provides preliminary evidence of systemic efficiencies. Conclusions This work highlights the need to study the costs of diffusion across time and broadens definitions of what is essential for successful implementation. In particular, cost analyses offer innovative methodologies for analyzing the resource needs of prevention systems. PMID:22325131

Implementation of an integrated computerized prescriber order-entry system for chemotherapy in a multisite safety-net health system.

PubMed

Chung, Clement; Patel, Shital; Lee, Rosetta; Fu, Lily; Reilly, Sean; Ho, Tuyet; Lionetti, Jason; George, Michael D; Taylor, Pam

2018-03-15

The development of a computerized prescriber order-entry (CPOE) system for chemotherapy in a multisite safety-net health system and the challenges to its successful implementation are described. Before CPOE for chemotherapy was first implemented and embedded in the electronic medical record system of Harris Health System (HHS), pharmacy personnel relied on regimen-specific preprinted order sets. However, due to differences in practice styles and workflow logistics, the paper orders across the 3 facilities were mostly site specific, with varying clinical content. Many of these order sets had not been approved by the oncology subcommittee. In addition, disparities in clinical knowledge and lack of communication contributed to inconsistencies in order set development. Led by medical directors from medical oncology departments at the 3 facilities, pharmacy administrators, and information technology representatives, HHS committed resources to supporting the adoption and use of a CPOE system for chemotherapy. Five practical lessons of broad applicability have been learned: engagement of interprofessional stakeholders, optimization of workflow before CPOE implementation, requirement of verification tool for CPOE, consolidation of protocols, and commitment to ongoing training and support. Evaluation of the CPOE system demonstrated a systemwide reduction in medication errors by 75% ( p < 0.05). Satisfaction with the CPOE system varied among sites and was unchanged institutionwide 6 months after the CPOE implementation. The development and implementation of CPOE for chemotherapy at a multisite safety-net health system created opportunities to optimize patient care and reduce variations through interprofessional collaborations. Initial evaluation suggested that CPOE reduced the medication-order error rate and improved user satisfaction in 1 of 3 facilities. Copyright © 2018 by the American Society of Health-System Pharmacists, Inc. All rights reserved.

Pharmaceutical information systems and possible implementations of informed consent -- developing an heuristic.

PubMed

Ploug, Thomas; Holm, Søren

2012-11-16

Denmark has implemented a comprehensive, nationwide pharmaceutical information system, and this system has been evaluated by the Danish Council of Ethics. The system can be seen as an exemplar of a comprehensive health information system for clinical use. The paper analyses 1) how informed consent can be implemented in the system and how different implementations create different impacts on autonomy and control of information, and 2) arguments directed towards justifying not seeking informed consent in this context. Based on the analysis a heuristic is provided which enables a ranking and estimation of the impact on autonomy and control of information of different options for consent to entry of data into the system and use of data from the system.The danger of routinisation of consent is identified.The Danish pharmaceutical information system raises issues in relation to autonomy and control of information, issues that will also occur in relation to other similar comprehensive health information systems. Some of these issues are well understood and their impact can be judged using the heuristic which is provided. More research is, however needed in relation to routinisation of consent.

Three axis electronic flight motion simulator real time control system design and implementation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gao, Zhiyuan; Miao, Zhonghua, E-mail: zhonghua-miao@163.com; Wang, Xiaohua

2014-12-15

A three axis electronic flight motion simulator is reported in this paper including the modelling, the controller design as well as the hardware implementation. This flight motion simulator could be used for inertial navigation test and high precision inertial navigation system with good dynamic and static performances. A real time control system is designed, several control system implementation problems were solved including time unification with parallel port interrupt, high speed finding-zero method of rotary inductosyn, zero-crossing management with continuous rotary, etc. Tests were carried out to show the effectiveness of the proposed real time control system.

Three axis electronic flight motion simulator real time control system design and implementation.

PubMed

Gao, Zhiyuan; Miao, Zhonghua; Wang, Xuyong; Wang, Xiaohua

2014-12-01

A three axis electronic flight motion simulator is reported in this paper including the modelling, the controller design as well as the hardware implementation. This flight motion simulator could be used for inertial navigation test and high precision inertial navigation system with good dynamic and static performances. A real time control system is designed, several control system implementation problems were solved including time unification with parallel port interrupt, high speed finding-zero method of rotary inductosyn, zero-crossing management with continuous rotary, etc. Tests were carried out to show the effectiveness of the proposed real time control system.

Evaluation of the Healthy Lifestyles Initiative for Improving Community Capacity for Childhood Obesity Prevention.

PubMed

Berman, Marcie; Bozsik, Frances; Shook, Robin P; Meissen-Sebelius, Emily; Markenson, Deborah; Summar, Shelly; DeWit, Emily; Carlson, Jordan A

2018-02-22

Policy, systems, and environmental approaches are recommended for preventing childhood obesity. The objective of our study was to evaluate the Healthy Lifestyles Initiative, which aimed to strengthen community capacity for policy, systems, and environmental approaches to healthy eating and active living among children and families. The Healthy Lifestyles Initiative was developed through a collaborative process and facilitated by community organizers at a local children's hospital. The initiative supported 218 partners from 170 community organizations through training, action planning, coalition support, one-on-one support, and the dissemination of materials and sharing of resources. Eighty initiative partners completed a brief online survey on implementation strategies engaged in, materials used, and policy, systems, and environmental activities implemented. In accordance with frameworks for implementation science, we assessed associations among the constructs by using linear regression to identify whether and which of the implementation strategies were associated with materials used and implementation of policy, systems, and environmental activities targeted by the initiative. Each implementation strategy was engaged in by 30% to 35% of the 80 survey respondents. The most frequently used materials were educational handouts (76.3%) and posters (66.3%). The most frequently implemented activities were developing or continuing partnerships (57.5%) and reviewing organizational wellness policies (46.3%). Completing an action plan and the number of implementation strategies engaged in were positively associated with implementation of targeted activities (action plan, effect size = 0.82; number of strategies, effect size = 0.51) and materials use (action plan, effect size = 0.59; number of strategies, effect size = 0.52). Materials use was positively associated with implementation of targeted activities (effect size = 0.35). Community-capacity-building efforts can be effective in supporting community organizations to engage in policy, systems, and environmental activities for healthy eating and active living. Multiple implementation strategies are likely needed, particularly strategies that involve a high level of engagement, such as training community organizations and working with them on structured action plans.

Formal semantic specifications as implementation blueprints for real-time programming languages

NASA Technical Reports Server (NTRS)

Feyock, S.

1981-01-01

Formal definitions of language and system semantics provide highly desirable checks on the correctness of implementations of programming languages and their runtime support systems. If these definitions can give concrete guidance to the implementor, major increases in implementation accuracy and decreases in implementation effort can be achieved. It is shown that of the wide variety of available methods the Hgraph (hypergraph) definitional technique (Pratt, 1975), is best suited to serve as such an implementation blueprint. A discussion and example of the Hgraph technique is presented, as well as an overview of the growing body of implementation experience of real-time languages based on Hgraph semantic definitions.

Factors Influencing Implementation of a Physical Activity Intervention in Residential Children's Homes.

PubMed

Lau, Erica Y; Saunders, Ruth P; Pate, Russell R

2016-11-01

The Environmental Intervention in Children's Homes (ENRICH) study was the first published physical activity intervention undertaken in residential children's homes (RCHs). The study revealed differences in implementation across the homes, which may be a key factor that affects program effectiveness. The purpose of this study was to examine the direct and indirect effects of organizational capacity, provider characteristics, and quality of prevention support system on level of implementation of the ENRICH intervention. This study analyzed the ENRICH process evaluation data collected from 24 RCHs. Bayesian Path analysis was used to examine the direct and indirect effects of organizational capacity, provider characteristics, and quality of prevention support system on level of implementation. Level of implementation across RCHs was variable, ranging from 38 to 97 % (M = 68.3, SD = 14.45). Results revealed that organizational capacity and provider characteristics had significant direct associations with level of implementation. Neither direct nor indirect associations between quality of prevention support system and level of implementation reached statistical significance. Conducting formative assessments on organizational capacity and provider characteristics and incorporating such information in implementation planning may increase the likelihood of achieving higher levels of implementation in future studies.

A Review of Studies on the System-Wide Implementation of Evidence-Based Psychotherapies for Posttraumatic Stress Disorder in the Veterans Health Administration.

PubMed

Rosen, C S; Matthieu, M M; Wiltsey Stirman, S; Cook, J M; Landes, S; Bernardy, N C; Chard, K M; Crowley, J; Eftekhari, A; Finley, E P; Hamblen, J L; Harik, J M; Kehle-Forbes, S M; Meis, L A; Osei-Bonsu, P E; Rodriguez, A L; Ruggiero, K J; Ruzek, J I; Smith, B N; Trent, L; Watts, B V

2016-11-01

Since 2006, the Veterans Health Administration (VHA) has instituted policy changes and training programs to support system-wide implementation of two evidence-based psychotherapies (EBPs) for posttraumatic stress disorder (PTSD). To assess lessons learned from this unprecedented effort, we used PubMed and the PILOTS databases and networking with researchers to identify 32 reports on contextual influences on implementation or sustainment of EBPs for PTSD in VHA settings. Findings were initially organized using the exploration, planning, implementation, and sustainment framework (EPIS; Aarons et al. in Adm Policy Ment Health Health Serv Res 38:4-23, 2011). Results that could not be adequately captured within the EPIS framework, such as implementation outcomes and adopter beliefs about the innovation, were coded using constructs from the reach, effectiveness, adoption, implementation, maintenance (RE-AIM) framework (Glasgow et al. in Am J Public Health 89:1322-1327, 1999) and Consolidated Framework for Implementation Research (CFIR; Damschroder et al. in Implement Sci 4(1):50, 2009). We highlight key areas of progress in implementation, identify continuing challenges and research questions, and discuss implications for future efforts to promote EBPs in large health care systems.

Experience Of Implementing The Integrated Management System In Manufacturing Companies In Slovakia

NASA Astrophysics Data System (ADS)

Lestyánszka Škůrková, Katarína; Kučerová, Marta; Fidlerová, Helena

2015-06-01

In corporate practice, the term of Integrated Management System means a system the aim of which is to manage an organization regarding the quality, environment, health and safety at work. In the first phase of the VEGA project No. 1/0448/13 "Transformation of ergonomics program into the company management structure through interaction and utilization QMS, EMS, HSMS", we focused on obtaining information about the way or procedure of implementing the integrated management systems in manufacturing companies in Slovakia. The paper considers characteristics of integrated management system, specifies the possibilities for successive integration of the management systems and also describes the essential aspects of the practical implementation of integrated management systems in companies in Slovakia.

A Smart Card-Based Electronic School Absenteeism System for Influenza-Like Illness Surveillance in Hong Kong: Design, Implementation, and Feasibility Assessment

PubMed Central

Lau, Eric HY; So, Hau Chi; Xiao, Jingyi; Lam, Chi Kin; Fang, Vicky J; Tam, Yat Hung; Leung, Gabriel M; Cowling, Benjamin J

2017-01-01

Background School-aged children have the highest incidence of respiratory virus infections each year, and transmission of respiratory viruses such as influenza virus can be a major concern in school settings. School absenteeism data have been employed as a component of influenza surveillance systems in some locations. Data timeliness and system acceptance remain as key determinants affecting the usefulness of a prospective surveillance system. Objective The aim of this study was to assess the feasibility of implementing an electronic school absenteeism surveillance system using smart card–based technology for influenza-like illness (ILI) surveillance among a representative network of local primary and secondary schools in Hong Kong. Methods We designed and implemented a surveillance system according to the Protocol for a Standardized information infrastructure for Pandemic and Emerging infectious disease Response (PROSPER). We employed an existing smart card–based education and school administration platform for data capture, customized the user interface, and used additional back end systems built for other downstream surveillance steps. We invited local schools to participate and collected absenteeism data by the implemented system. We compared temporal trend of the absenteeism data with data from existing community sentinel and laboratory surveillance data. Results We designed and implemented an ILI surveillance system utilizing smart card–based attendance tracking approach for data capture. We implemented the surveillance system in a total of 107 schools (including 66 primary schools and 41 secondary schools), covering a total of 75,052 children. The system successfully captured information on absences for 2 consecutive academic years (2012-2013 and 2013-2014). The absenteeism data we collected from the system reflected ILI activity in the community, with an upsurge in disease activity detected up to 1 to 2 weeks preceding other existing surveillance systems. Conclusions We designed and implemented a novel smart card technology–based school absenteeism surveillance system. Our study demonstrated the feasibility of building a large-scale surveillance system riding on a routinely adopted data collection approach and the use of simple system enhancement to minimize workload implication and enhance system acceptability. Data from this system have potential value in supplementing existing sentinel influenza surveillance for situational awareness of influenza activity in the community. PMID:28986338

Opening the black box of transfer systems in public sector health services in a Western state in India.

PubMed

Purohit, Bhaskar; Martineau, Tim; Sheikh, Kabir

2016-08-22

Limited research on Posting and Transfer (P&T) policies and systems in the public sector health services and the reluctance for an open debate on the issue makes P&T as a black box. Limited research on P&T in India suggests that P&T policies and systems are either non-existent, weak, poorly implemented or characterized by corruption. Hence the current study aimed at opening the "black box" of P&T systems in public sector health services in India by assessing the implementation gaps between P&T policies and their actual implementation. This was a qualitative study carried out in Department of Health, in a Western State in India. To understand the extant P&T policies, a systems map was first developed with the help of document review and Key Informant (KI) Interviews. Next systems audit was carried out to assess the actual implementation of transfer policies by interviewing Medical Officers (MOs), the group mainly affected by the P&T policies. Job histories were constructed from the interviews to understand transfer processes like frequencies of transfers and to assess if transfer rules were adhered. The analysis is based on a synthesis of document review, 19 in-depth interviews with MOs working with state health department and five in-depth interviews with Key Informants (KIs). Framework analysis approach was used to analyze data using NVIVO. The state has a generic transfer guideline applicable to all government officers but there is no specific transfer policy or guideline for government health personnel. The generic transfer guidelines are weakly implemented indicating a significant gap between policy and actual implementation. The formal transfer guidelines are undermined by a parallel system in which desirable posts are attained, retained or sometimes given up by the use of political connections and money. MOs' experiences of transfers were marked by perceptions of unfairness and irregularities reflected through interviews as well as the job histories. The generic transfer rules and ambiguity in how transfers are treated may explain the discrepancy between policy and implementation leading to systems abuse. This discrepancy could have negative influence on MOs' morale which could in turn affect distribution of MOs. Where possible, ambiguity in the rules should be avoided and a greater transparency on implementation of the transfer rules is needed. However, it may not be possible to make any significant improvements to P&T policies and how they are implemented until the external pressure that creates parallel systems is greatly reduced in translating HR policy into HR practice. Effective P&T policies and implementation may have important implications for organizational performance and may help to improve Human Resource (HR) policy and HR expertise. Also there is a greater need for transparency on implementation of the rules. However, it may not be possible to make any significant improvements to P&T policies and how they are implemented until the external pressure that creates parallel systems is greatly reduced.

Foundational Report Series: Advanced Distribution Management Systems for Grid Modernization, DMS Industry Survey

DOE Office of Scientific and Technical Information (OSTI.GOV)

Singh, Ravindra; Uluski, Robert; Reilly, James T.

The objective of this survey is to benchmark current practices for DMS implementation to serve as a guide for future system implementations. The survey sought information on current plans to implement DMS, DMS functions of interest, implementation challenges, functional benefits achieved, and other relevant information. These survey results were combined (where possible) with results of similar surveys conducted in the previous four years to observe trends over time.

Design review report for the SY-101 RAPID mitigation system

DOE Office of Scientific and Technical Information (OSTI.GOV)

SCHLOSSER, R.L.

1999-05-24

This report documents design reviews conducted of the SY-101 Respond And Pump In Days (RAPID) Mitigation System. As part of the SY-101 Surface-Level-Rise Remediation Project, the SY-101 WID Mitigation System will reduce the potential unacceptable consequences of crust growth in Tank 241-SY-101 (SY-101). Projections of the crust growth rate indicate that the waste level in the tank may reach the juncture of the primary and secondary confinement structures of the tank late in 1999. Because of this time constraint, many design activities are being conducted in parallel and design reviews were conducted for system adequacy as well as design implementationmore » throughout the process. Design implementation, as used in this design review report, is the final component selection (e.g., which circuit breaker, valve, or thermocouple) that meets the approved design requirements, system design, and design and procurement specifications. Design implementation includes the necessary analysis, testing, verification, and qualification to demonstrate compliance with the system design and design requirements. Design implementation is outside the scope of this design review. The design activities performed prior to detailed design implementation (i.e., system mission requirements, functional design requirements, technical criteria, system conceptual design, and where design and build contracts were placed, the procurement specification) have been reviewed and are within the scope of this design review report. Detailed design implementation will be controlled, reviewed, and where appropriate, approved in accordance with Tank Waste Remediation System (TWRS) engineering procedures. Review of detailed design implementation will continue until all components necessary to perform the transfer function are installed and tested.« less

Configurations and implementation of payroll system using open source erp: a case study of Koperasi PT Sri

NASA Astrophysics Data System (ADS)

Terminanto, A.; Swantoro, H. A.; Hidayanto, A. N.

2017-12-01

Enterprise Resource Planning (ERP) is an integrated information system to manage business processes of companies of various business scales. Because of the high cost of ERP investment, ERP implementation is usually done in large-scale enterprises, Due to the complexity of implementation problems, the success rate of ERP implementation is still low. Open Source System ERP becomes an alternative choice of ERP application to SME companies in terms of cost and customization. This study aims to identify characteristics and configure the implementation of OSS ERP Payroll module in KKPS (Employee Cooperative PT SRI) using OSS ERP Odoo and using ASAP method. This study is classified into case study research and action research. Implementation of OSS ERP Payroll module is done because the HR section of KKPS has not been integrated with other parts. The results of this study are the characteristics and configuration of OSS ERP payroll module in KKPS.

Community characteristics and implementation factors associated with effective systems of care.

PubMed

Lunn, Laurel M; Heflinger, Craig Anne; Wang, Wei; Greenbaum, Paul E; Kutash, Krista; Boothroyd, Roger A; Friedman, Robert M

2011-07-01

How are characteristics of communities associated with the implementation of the principles of systems of care (SOC)? This study uses multilevel modeling with a stratified random sample (N = 225) of US counties to explore community-level predictors of the implementation factors of the System of Care Implementation Survey. A model composed of community-level social indicators fits well with 5 of 14 factors identified as relevant for effective SOCs. As hypothesized, community disadvantage was negatively and residential stability positively associated with the implementation of SOC principles. Designation as a mental health professional shortage area was positively related to some implementation scores, as was the percentage of minority residents, while rurality was not significantly associated with any of the factors. Given the limitations of the study, the results should be interpreted with caution, but suggest that further research is merited to clarify these relationships that could inform efforts directed at promoting SOCs.

Software Development Technologies for Reactive, Real-Time, and Hybrid Systems: Summary of Research

NASA Technical Reports Server (NTRS)

Manna, Zohar

1998-01-01

This research is directed towards the implementation of a comprehensive deductive-algorithmic environment (toolkit) for the development and verification of high assurance reactive systems, especially concurrent, real-time, and hybrid systems. For this, we have designed and implemented the STCP (Stanford Temporal Prover) verification system. Reactive systems have an ongoing interaction with their environment, and their computations are infinite sequences of states. A large number of systems can be seen as reactive systems, including hardware, concurrent programs, network protocols, and embedded systems. Temporal logic provides a convenient language for expressing properties of reactive systems. A temporal verification methodology provides procedures for proving that a given system satisfies a given temporal property. The research covered necessary theoretical foundations as well as implementation and application issues.

Interplanetary Overlay Network Bundle Protocol Implementation

NASA Technical Reports Server (NTRS)

Burleigh, Scott C.

2011-01-01

The Interplanetary Overlay Network (ION) system's BP package, an implementation of the Delay-Tolerant Networking (DTN) Bundle Protocol (BP) and supporting services, has been specifically designed to be suitable for use on deep-space robotic vehicles. Although the ION BP implementation is unique in its use of zero-copy objects for high performance, and in its use of resource-sensitive rate control, it is fully interoperable with other implementations of the BP specification (Internet RFC 5050). The ION BP implementation is built using the same software infrastructure that underlies the implementation of the CCSDS (Consultative Committee for Space Data Systems) File Delivery Protocol (CFDP) built into the flight software of Deep Impact. It is designed to minimize resource consumption, while maximizing operational robustness. For example, no dynamic allocation of system memory is required. Like all the other ION packages, ION's BP implementation is designed to port readily between Linux and Solaris (for easy development and for ground system operations) and VxWorks (for flight systems operations). The exact same source code is exercised in both environments. Initially included in the ION BP implementations are the following: libraries of functions used in constructing bundle forwarders and convergence-layer (CL) input and output adapters; a simple prototype bundle forwarder and associated CL adapters designed to run over an IPbased local area network; administrative tools for managing a simple DTN infrastructure built from these components; a background daemon process that silently destroys bundles whose time-to-live intervals have expired; a library of functions exposed to applications, enabling them to issue and receive data encapsulated in DTN bundles; and some simple applications that can be used for system checkout and benchmarking.

The evaluation of a standardized call/recall system for childhood immunizations in Wandsworth, England.

PubMed

Atchison, Christina; Zvoc, Miro; Balakrishnan, Ravikumar

2013-06-01

To improve uptake of childhood immunizations in Wandsworth we developed a standardized call/recall system based on parents being sent three reminders and defaulters being referred to a Health Visitor. Thirty-two out of 44 primary care practices in the area implemented the intervention in September 2011. The aim of this study was to evaluate the implementation, delivery and impact on immunization uptake of the new call/recall system. To assess implementation and delivery, a mixed method approach was used including qualitative (structured interviews) and quantitative (data collected at three months post-implementation) assessment. To assess the impact, we used Student's t test to compare the difference in immunization uptake rates between intervention and non-intervention practices before and after implementation. The call/recall system was viewed positively by both parents and staff. Most children due or overdue immunizations were successfully captured by the 1st invitation reminder. After three invitations, between 87.3 % (MMR1) and 92.2 % (pre-school booster) of children identified as due or overdue immunizations successfully responded. Prior to implementation there was no difference in uptake rates between intervention and non-intervention practices. Post-implementation uptake rates for DTaP/IPV/Hib, MMR1, MMR2 and the pre-school booster were significantly greater in the intervention practices. Similar findings were seen for PCV and Hib/MenC boosters, although the differences were not statistically significant at the 5 % level. Following the successful implementation of a standardized call/recall system in Wandsworth, other regions or primary care practices may wish to consider introducing a similar system to help improve their immunization coverage levels.

The development of a highly constrained health level 7 implementation guide to facilitate electronic laboratory reporting to ambulatory electronic health record systems.

PubMed

Sujansky, Walter V; Overhage, J Marc; Chang, Sophia; Frohlich, Jonah; Faus, Samuel A

2009-01-01

Electronic laboratory interfaces can significantly increase the value of ambulatory electronic health record (EHR) systems by providing laboratory result data automatically and in a computable form. However, many ambulatory EHRs cannot implement electronic laboratory interfaces despite the existence of messaging standards, such as Health Level 7, version 2 (HL7). Among several barriers to implementing laboratory interfaces is the extensive optionality within the HL7 message standard. This paper describes the rationale for and development of an HL7 implementation guide that seeks to eliminate most of the optionality inherent in HL7, but retain the information content required for reporting outpatient laboratory results. A work group of heterogeneous stakeholders developed the implementation guide based on a set of design principles that emphasized parsimony, practical requirements, and near-term adoption. The resulting implementation guide contains 93% fewer optional data elements than HL7. This guide was successfully implemented by 15 organizations during an initial testing phase and has been approved by the HL7 standards body as an implementation guide for outpatient laboratory reporting. Further testing is required to determine whether widespread adoption of the implementation guide by laboratories and EHR systems can facilitate the implementation of electronic laboratory interfaces.

Information System Implementation: Benchmarking the Stages.

ERIC Educational Resources Information Center

Calbos, Dennis P.

1984-01-01

The evolution of administrative data processing systems at the University of Georgia is summarized. Nolan's revised stage model was used as a framework to present the university's experience and relate it to the growing body of system implementation research. (Author/MLW)

Paratransit Handbook : a Guide to Paratransit System Implementation volume II - parts 4 and 5

DOT National Transportation Integrated Search

1979-02-01

This Paratransit Handbook has been developed to aid public officials, planners and system operators in planning, designing, implementing, operating and evaluating integrated paratransit systems. The Handbook represents a compedium of techniques and e...

Quality management, a directive approach to patient safety.

PubMed

Ayuso-Murillo, Diego; de Andrés-Gimeno, Begoña; Noriega-Matanza, Concha; López-Suárez, Rafael Jesús; Herrera-Peco, Ivan

Nowadays the implementation of effective quality management systems and external evaluation in healthcare is a necessity to ensure not only transparency in activities related to health but also access to health and patient safety. The key to correctly implementing a quality management system is support from the managers of health facilities, since it is managers who design and communicate to health professionals the strategies of action involved in quality management systems. This article focuses on nursing managers' approach to quality management through the implementation of cycles of continuous improvement, participation of improvement groups, monitoring systems and external evaluation quality models (EFQM, ISO). The implementation of a quality management system will enable preventable adverse effects to be minimized or eliminated, and promote patient safety and safe practice by health professionals. Copyright © 2017 Elsevier España, S.L.U. All rights reserved.

Out-of-Hospital Cardiac Arrest Resuscitation Systems of Care: A Scientific Statement From the American Heart Association.

PubMed

McCarthy, James J; Carr, Brendan; Sasson, Comilla; Bobrow, Bentley J; Callaway, Clifton W; Neumar, Robert W; Ferrer, Jose Maria E; Garvey, J Lee; Ornato, Joseph P; Gonzales, Louis; Granger, Christopher B; Kleinman, Monica E; Bjerke, Chris; Nichol, Graham

2018-05-22

The American Heart Association previously recommended implementation of cardiac resuscitation systems of care that consist of interconnected community, emergency medical services, and hospital efforts to measure and improve the process of care and outcome for patients with cardiac arrest. In addition, the American Heart Association proposed a national process to develop and implement evidence-based guidelines for cardiac resuscitation systems of care. Significant experience has been gained with implementing these systems, and new evidence has accumulated. This update describes recent advances in the science of cardiac resuscitation systems and evidence of their effectiveness, as well as recent progress in dissemination and implementation throughout the United States. Emphasis is placed on evidence published since the original recommendations (ie, including and since 2010). © 2018 American Heart Association, Inc.

The use of UNIX in a real-time environment

NASA Technical Reports Server (NTRS)

Luken, R. D.; Simons, P. C.

1986-01-01

This paper describes a project to evaluate the feasibility of using commercial off-the-shelf hardware and the UNIX operating system, to implement a real-time control and monitor system. A functional subset of the Checkout, Control and Monitor System was chosen as the test bed for the project. The project consists of three separate architecture implementations: a local area bus network, a star network, and a central host. The motivation for this project stemmed from the need to find a way to implement real-time systems, without the cost burden of developing and maintaining custom hardware and unique software. This has always been accepted as the only option because of the need to optimize the implementation for performance. However, with the cost/performance of today's hardware, the inefficiencies of high-level languages and portable operating systems can be effectively overcome.

Simulation system architecture design for generic communications link

NASA Technical Reports Server (NTRS)

Tsang, Chit-Sang; Ratliff, Jim

1986-01-01

This paper addresses a computer simulation system architecture design for generic digital communications systems. It addresses the issues of an overall system architecture in order to achieve a user-friendly, efficient, and yet easily implementable simulation system. The system block diagram and its individual functional components are described in detail. Software implementation is discussed with the VAX/VMS operating system used as a target environment.

Implementing Data-Informed Decision Making in Schools: Teacher Access, Supports and Use

ERIC Educational Resources Information Center

Means, Barbara; Padilla, Christine; DeBarger, Angela; Bakia, Marianne

2009-01-01

Implementation of the No Child Left Behind (NCLB) legislation has been accompanied by demand for data systems capable of providing a longitudinal record of each student's educational experiences and performance over time. The national Study of Education Data Systems and Decision Making is examining both the implementation of student data systems…

A Huygens Surface Approach to Antenna Implementation in Near-Field Radar Imaging System Simulations

DTIC Science & Technology

2015-08-01

environment. The model consists of an ultra - wideband , forward-looking radar imaging system, equipped with a multi-static antenna array and mounted on a...of the receiving antenna. 2.2 Huygens Surface Implementation Details The NAFDTD code implements the excitation waveform as a short, ultra - wideband ...

1989-90 Implementation of the Management Information System.

ERIC Educational Resources Information Center

Hamre, William; Holsclaw, Mick

For the past three years, the Board of Governors has made the development and implementation of the California Community College Management Information System (MIS) a major priority. Following two years of pilot testing with five community college districts, statewide implementation of Phase I of MIS is slated to begin in July/August 1989. Several…

Pay-for-Performance in Education: An Issue Brief for Business Leaders.

ERIC Educational Resources Information Center

National Alliance of Business, Inc., Washington, DC.

Implementing pay-for-performance salary structures has been used successfully in business and can result in benefits for educational systems when implemented along with other compensation reforms. Business leaders can help in the implementation of teacher pay-for-performance systems in the following ways: (1) ensure that pay-for-performance plans…

The Effects of Systemically Implemented Professional Learning Communities on the Educational Culture of a Public School

ERIC Educational Resources Information Center

Bradshaw, Elizabeth A.

2017-01-01

The paper explores if systemic implementation of collaborative practices impacts the educational culture of a school. Using the fundamental principles of Professional Learning Communities, the research analyzed what collaborative practices were implemented and if they were successful as cultural change agents. Section one discusses the different…

A novel biomimetic sonarhead using beamforming technology to mimic bat echolocation.

PubMed

Steckel, Jan; Peremans, Herbert

2012-07-01

A novel biomimetic sonarhead has been developed to allow researchers of bat echolocation behavior and biomimetic sonar to perform experiments with a system similar to the bat¿s sensory system. The bat's echolocation-related transfer function (ERTF) is implemented using an array of receivers to implement the head-related transfer function (HRTF), and an array of emitters mounted on a cylindrical manifold to implement the emission pattern of the bat. The complete system is controlled by a field-programmable gate array (FPGA) based embedded system connected through a USB interface.

A Web-based, secure, light weight clinical multimedia data capture and display system.

PubMed Central

Wang, S. S.; Starren, J.

2000-01-01

Computer-based patient records are traditionally composed of textual data. Integration of multimedia data has been historically slow. Multimedia data such as image, audio, and video have been traditionally more difficult to handle. An implementation of a clinical system for multimedia data is discussed. The system implementation uses Java, Secure Socket Layer (SSL), and Oracle 8i. The system is on top of the Internet so it is architectural independent, cross-platform, cross-vendor, and secure. Design and implementations issues are discussed. Images Figure 2 Figure 3 PMID:11080014

23 CFR 973.206 - Funds for establishment, development, and implementation of the systems.

Code of Federal Regulations, 2010 CFR

2010-04-01

... TRANSPORTATION FEDERAL LANDS HIGHWAYS MANAGEMENT SYSTEMS PERTAINING TO THE BUREAU OF INDIAN AFFAIRS AND THE INDIAN RESERVATION ROADS PROGRAM Bureau of Indian Affairs Management Systems § 973.206 Funds for establishment, development, and implementation of the systems. The IRR program management funds may be used to...

Science Orders Systems and Operations Manual.

ERIC Educational Resources Information Center

Kriz, Harry M.

This manual describes the implementation and operation of SCIENCE ORDERS, an online orders management system used by the Science and Technology Department of Newman Library at Virginia Polytechnic Institute and State University. Operational since January 1985, the system is implemented using the SPIRES database management system and is used to (1)…

42 CFR 412.304 - Implementation of the capital prospective payment system.

Code of Federal Regulations, 2010 CFR

2010-10-01

... HEALTH AND HUMAN SERVICES MEDICARE PROGRAM PROSPECTIVE PAYMENT SYSTEMS FOR INPATIENT HOSPITAL SERVICES Prospective Payment System for Inpatient Hospital Capital Costs General Provisions § 412.304 Implementation of the capital prospective payment system. (a) General rule. As described in §§ 412.312 through 412.370...

How change management can prevent the failure of information systems implementation among Malaysian government hospitals?

NASA Astrophysics Data System (ADS)

ChePa, Noraziah; Jasin, Noorhayati Md; Bakar, Nur Azzah Abu

2017-10-01

Fail to prevent or control challenges of Information System (IS) implementation have led to the failure of its implementation. Successful implementation of IS has been a challenging task to any organization including government hospitals. Government has invested a big amount of money on information system (IS) projects to improve service delivery in healthcare. However, several of them failed to be implemented successfully due to several factors. This article proposes a prevention model which incorporated Change Management (CM) concepts to avoid the failure of IS implementation, hence ensuring the success of it. Challenges of IS implementation in government hospitals have been discovered. Extensive literature review and deep interview approaches were employed to discover these challenges. A prevention model has been designed to cater the challenges. The model caters three main phases of implementation; pre-implementation, during implementation, and post-implementation by adopting CM practices of Lewin's, Kotter's and Prosci's CM model. Six elements of CM comprising thirteen sub-elements adopted from the three CM models have been used to handle CFFs of Human and Support issues; guiding team, resistance avoidance, IS adoption, enforcement, monitoring, and IS sustainability. Successful practice of the proposed mapping is expected to prevent CFFs to occur, hence ensuring a successful implementation of IS in the hospitals. The proposed model has been presented and successfully evaluated by the domain experts from the selected hospitals. The proposed model is believed to be beneficial for top management, IT practitioners and medical practitioners in preventing IS implementation failure among government hospitals towards ensuring the success implementation.

Guidance, navigation, and control subsystem equipment selection algorithm using expert system methods

NASA Technical Reports Server (NTRS)

Allen, Cheryl L.

1991-01-01

Enhanced engineering tools can be obtained through the integration of expert system methodologies and existing design software. The application of these methodologies to the spacecraft design and cost model (SDCM) software provides an improved technique for the selection of hardware for unmanned spacecraft subsystem design. The knowledge engineering system (KES) expert system development tool was used to implement a smarter equipment section algorithm than that which is currently achievable through the use of a standard data base system. The guidance, navigation, and control subsystems of the SDCM software was chosen as the initial subsystem for implementation. The portions of the SDCM code which compute the selection criteria and constraints remain intact, and the expert system equipment selection algorithm is embedded within this existing code. The architecture of this new methodology is described and its implementation is reported. The project background and a brief overview of the expert system is described, and once the details of the design are characterized, an example of its implementation is demonstrated.

Information system equality for food security--implementation of the food safety control system in Taiwan.

PubMed

Chen, Shaun C; Hsu, Guoo-Shyng Wang; Chiu, Chihwei P

2009-01-01

Food security plays a central role in governing agricultural policies in Taiwan. In addition to overuse or the illegal use of pesticide, meat leanness promoters, animal drugs and melamine in the food supply; as well as foodborne illness draws the greatest public concern due to incidents that occur every year in Taiwan. The present report demonstrates the implementation of a food safety control system in Taiwan. In order to control foodborne outbreaks effectively, the central government of the Department of Health of Taiwan launched the food safety control system which includes both the good hygienic practice (GHP) and the HACCP plan, in the last decade. From 1998 to the present, 302 food affiliations that implemented the system have been validated and accredited by a well-established audit system. The implementation of a food safety control system in compliance with international standards is of crucial importance to ensure complete safety and the high quality of foods, not only for domestic markets, but also for international trade.

Integrated Design and Implementation of Embedded Control Systems with Scilab

PubMed Central

Ma, Longhua; Xia, Feng; Peng, Zhe

2008-01-01

Embedded systems are playing an increasingly important role in control engineering. Despite their popularity, embedded systems are generally subject to resource constraints and it is therefore difficult to build complex control systems on embedded platforms. Traditionally, the design and implementation of control systems are often separated, which causes the development of embedded control systems to be highly time-consuming and costly. To address these problems, this paper presents a low-cost, reusable, reconfigurable platform that enables integrated design and implementation of embedded control systems. To minimize the cost, free and open source software packages such as Linux and Scilab are used. Scilab is ported to the embedded ARM-Linux system. The drivers for interfacing Scilab with several communication protocols including serial, Ethernet, and Modbus are developed. Experiments are conducted to test the developed embedded platform. The use of Scilab enables implementation of complex control algorithms on embedded platforms. With the developed platform, it is possible to perform all phases of the development cycle of embedded control systems in a unified environment, thus facilitating the reduction of development time and cost. PMID:27873827

Integrated Design and Implementation of Embedded Control Systems with Scilab.

PubMed

Ma, Longhua; Xia, Feng; Peng, Zhe

2008-09-05

Embedded systems are playing an increasingly important role in control engineering. Despite their popularity, embedded systems are generally subject to resource constraints and it is therefore difficult to build complex control systems on embedded platforms. Traditionally, the design and implementation of control systems are often separated, which causes the development of embedded control systems to be highly timeconsuming and costly. To address these problems, this paper presents a low-cost, reusable, reconfigurable platform that enables integrated design and implementation of embedded control systems. To minimize the cost, free and open source software packages such as Linux and Scilab are used. Scilab is ported to the embedded ARM-Linux system. The drivers for interfacing Scilab with several communication protocols including serial, Ethernet, and Modbus are developed. Experiments are conducted to test the developed embedded platform. The use of Scilab enables implementation of complex control algorithms on embedded platforms. With the developed platform, it is possible to perform all phases of the development cycle of embedded control systems in a unified environment, thus facilitating the reduction of development time and cost.

Student Information Systems--Implementation Challenges and the Road Ahead

ERIC Educational Resources Information Center

Mukerjee, Sheila

2012-01-01

This paper presents a practitioner's view on student system implementations in the Australian university sector. A student information system is a core system of any university and integral to its operations and services to students. These systems are constantly on the list of major projects and at any point in time, a university is either…

Educational Application of Dialogue System To Support e-Learning.

ERIC Educational Resources Information Center

Kim, Youn-Gi; Lee, Chul-Hwan; Han, Sun-Gwan

This study is on the design and implementation of an educational dialogue system to support e-learning. The learning domain to apply the dialogue system used the subject of geometry. The knowledge in the dialogue-based system for learning geometry was created and represented by XML-based AIML. The implemented system in this study can understand…

Microcomputer-Based Genetics Office Database System

PubMed Central

Cutts, James H.; Mitchell, Joyce A.

1985-01-01

A database management system (Genetics Office Automation System, GOAS) has been developed for the Medical Genetics Unit of the University of Missouri. The system, which records patients' visits to the Unit's genetic and prenatal clinics, has been implemented on an IBM PC/XT microcomputer. A description of the system, the reasons for implementation, its databases, and uses are presented.

Implementation of Service Learning and Civic Engagement for Computer Information Systems Students through a Course Project at the Hashemite University

ERIC Educational Resources Information Center

Al-Khasawneh, Ahmad; Hammad, Bashar K.

2013-01-01

Service learning methodologies provide information systems students with the opportunity to create and implement systems in real-world, public service-oriented social contexts. This paper presents a case study of integrating a service learning project into an undergraduate Computer Information Systems course titled "Information Systems"…

A study of systems implementation languages for the POCCNET system

NASA Technical Reports Server (NTRS)

Basili, V. R.; Franklin, J. W.

1976-01-01

The results are presented of a study of systems implementation languages for the Payload Operations Control Center Network (POCCNET). Criteria are developed for evaluating the languages, and fifteen existing languages are evaluated on the basis of these criteria.

AMS -- The Unix ADAM Message System

NASA Astrophysics Data System (ADS)

Kelly, B. D.; Chipperfield, A. J.

The ADAM Message System (AMS) library, which implements the ADAM inter-task communications protocol under Unix, is described, along with its Fortran-callable interface (FAMS). The description of AMS is distinguished from the current implementation which uses the Message System Primitives (MSP).

23 CFR 973.204 - Management systems requirements.

Code of Federal Regulations, 2010 CFR

2010-04-01

... the nationwide management systems, implementation schedule, data sources, including the need to accommodate State and local data, and cost estimate. (c) Indian tribes may develop, establish, and implement tribal management systems under a self-determination contract or self-governance annual funding agreement...

Integrated System Health Management: Foundational Concepts, Approach, and Implementation.

NASA Technical Reports Server (NTRS)

Figueroa, Fernando; Schmalzel, John; Walker, Mark; Venkatesh, Meera; Kapadia, Ravi; Morris, Jon; Turowski, Mark; Smith, Harvey

2009-01-01

Implementation of integrated system health management (ISHM) capability is fundamentally linked to the management of data, information, and knowledge (DIaK) with the purposeful objective of determining the health of a system. It is akin to having a team of experts who are all individually and collectively observing and analyzing a complex system, and communicating effectively with each other in order to arrive to an accurate and reliable assessment of its health. We present concepts, procedures, and a specific approach as a foundation for implementing a credible ISHM capability. The capability stresses integration of DIaK from all elements of a system. The intent is also to make possible implementation of on-board ISHM capability, in contrast to a remote capability. The information presented is the result of many years of research, development, and maturation of technologies, and of prototype implementations in operational systems (rocket engine test facilities). The paper will address the following topics: 1. ISHM Model of a system 2. Detection of anomaly indicators. 3. Determination and confirmation of anomalies. 4. Diagnostic of causes and determination of effects. 5. Consistency checking cycle. 6. Management of health information 7. User Interfaces 8. Example implementation ISHM has been defined from many perspectives. We define it as a capability that might be achieved by various approaches. We describe a specific approach that has been matured throughout many years of development, and pilot implementations. ISHM is a capability that is achieved by integrating data, information, and knowledge (DIaK) that might be distributed throughout the system elements (which inherently implies capability to manage DIaK associated with distributed sub-systems). DIaK must be available to any element of a system at the right time and in accordance with a meaningful context. ISHM Functional Capability Level (FCL) is measured by how well a system performs the following functions: (1) detect anomalies, (2) diagnose causes, (3) predict future anomalies/failures, and (4) provide the user with an integrated awareness about the condition of every element in the system and guide user decisions.

Drosophila increase exploration after visually detecting predators.

PubMed

de la Flor, Miguel; Chen, Lijian; Manson-Bishop, Claire; Chu, Tzu-Chun; Zamora, Kathya; Robbins, Danielle; Gunaratne, Gemunu; Roman, Gregg

2017-01-01

Novel stimuli elicit behaviors that are collectively known as specific exploration. These behaviors allow the animal to become more familiar with the novel objects within its environment. Specific exploration is frequently suppressed by defensive reactions to predator cues. Herein, we examine if this suppression occurs in Drosophila melanogaster by measuring the response of these flies to wild harvested predators. The flies used in our experiments have been cultured and had not lived under predator threat for multiple decades. In a circular arena with centrally-caged predators, wild type Drosophila actively avoided the pantropical jumping spider, Plexippus paykulli, and the Texas unicorn mantis, Phyllovates chlorophaena, indicating an innate defensive reaction to these predators. Interestingly, wild type Drosophila males also avoided a centrally-caged mock spider, and the avoidance of the mock spider became exaggerated when it was made to move within the cage. Visually impaired Drosophila failed to detect and avoid the Plexippus paykulli and the moving mock spider, while the broadly anosmic orco2 mutants were fully capable of detecting and avoiding Plexippus paykulli, indicating that these flies principally relied upon vison to perceive the predator stimuli. During early exploration of the arena, exploratory activity increased in the presence of Plexippus paykulli and the moving mock spider. The elevated activity induced by Plexippus paykulli disappeared after the fly had finished exploring, suggesting the flies were capable of habituating the predator cues. Taken together, these results indicate that despite being isolated from predators for decades Drosophila will visually detect these predators, retain innate defensive behaviors, respond by increasing exploratory activity in the arena rather than suppressing activity, and may habituate to normal predator cues.

Drosophila increase exploration after visually detecting predators

PubMed Central

Manson-Bishop, Claire; Chu, Tzu-Chun; Zamora, Kathya; Robbins, Danielle; Gunaratne, Gemunu

2017-01-01

Novel stimuli elicit behaviors that are collectively known as specific exploration. These behaviors allow the animal to become more familiar with the novel objects within its environment. Specific exploration is frequently suppressed by defensive reactions to predator cues. Herein, we examine if this suppression occurs in Drosophila melanogaster by measuring the response of these flies to wild harvested predators. The flies used in our experiments have been cultured and had not lived under predator threat for multiple decades. In a circular arena with centrally-caged predators, wild type Drosophila actively avoided the pantropical jumping spider, Plexippus paykulli, and the Texas unicorn mantis, Phyllovates chlorophaena, indicating an innate defensive reaction to these predators. Interestingly, wild type Drosophila males also avoided a centrally-caged mock spider, and the avoidance of the mock spider became exaggerated when it was made to move within the cage. Visually impaired Drosophila failed to detect and avoid the Plexippus paykulli and the moving mock spider, while the broadly anosmic orco2 mutants were fully capable of detecting and avoiding Plexippus paykulli, indicating that these flies principally relied upon vison to perceive the predator stimuli. During early exploration of the arena, exploratory activity increased in the presence of Plexippus paykulli and the moving mock spider. The elevated activity induced by Plexippus paykulli disappeared after the fly had finished exploring, suggesting the flies were capable of habituating the predator cues. Taken together, these results indicate that despite being isolated from predators for decades Drosophila will visually detect these predators, retain innate defensive behaviors, respond by increasing exploratory activity in the arena rather than suppressing activity, and may habituate to normal predator cues. PMID:28746346

Negative ion beam development at Cadarache (invited)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Simonin, A.; Bucalossi, J.; Desgranges, C.

1996-03-01

Neutral beam injection (NBI) is one of the candidates for plasma heating and current drive in the new generation of large magnetic fusion devices (ITER). In order to produce the required deuterium atom beams with energies of 1 MeV and powers of tens of MW, negative D{sup {minus}} ion beams are required. For this purpose, multiampere D{sup {minus}} beam production and 1 MeV electrostatic acceleration is being studied at Cadarache. The SINGAP experiment, a 1 MeV 0.1 A D{sup {minus}} multisecond beam accelerator facility, has recently started operation. It is equipped with a Pagoda ion source, a multiaperture 60 keVmore » preaccelerator and a 1 MV 120 mA power supply. The particular feature of SINGAP is that the postaccelerator merges the 60 keV beamlets, aiming at accelerating the whole beam to 1 MeV in a single gap. The 1 MV level was obtained in less than 2 weeks, the accumulated voltage on-time of being {approximately}22 min. A second test bed MANTIS, is devoted to the development of multiampere D{sup {minus}} sources. It is capable of driving discharges with current up to 2500 A at arc voltages up to 150 V. A large multicusp source has been tested in pure volume and cesiated operation. With cesium seeding, an accelerated D{sup {minus}} beam current density of up to 5.2 mA/cm{sup 2} (2 A of D{sup {minus}}) was obtained. A modification of the extractor is underway in order to improve this performance. A 3D Monte Carlo code has been developed to simulate the negative ion transport in magnetized plasma sources and optimize magnetic field configuration of the large area D{sup {minus}} sources. {copyright} {ital 1996 American Institute of Physics.}« less

Depth-of-interaction estimates in pixelated scintillator sensors using Monte Carlo techniques

NASA Astrophysics Data System (ADS)

Sharma, Diksha; Sze, Christina; Bhandari, Harish; Nagarkar, Vivek; Badano, Aldo

2017-01-01

Image quality in thick scintillator detectors can be improved by minimizing parallax errors through depth-of-interaction (DOI) estimation. A novel sensor for low-energy single photon imaging having a thick, transparent, crystalline pixelated micro-columnar CsI:Tl scintillator structure has been described, with possible future application in small-animal single photon emission computed tomography (SPECT) imaging when using thicker structures under development. In order to understand the fundamental limits of this new structure, we introduce cartesianDETECT2, an open-source optical transport package that uses Monte Carlo methods to obtain estimates of DOI for improving spatial resolution of nuclear imaging applications. Optical photon paths are calculated as a function of varying simulation parameters such as columnar surface roughness, bulk, and top-surface absorption. We use scanning electron microscope images to estimate appropriate surface roughness coefficients. Simulation results are analyzed to model and establish patterns between DOI and photon scattering. The effect of varying starting locations of optical photons on the spatial response is studied. Bulk and top-surface absorption fractions were varied to investigate their effect on spatial response as a function of DOI. We investigated the accuracy of our DOI estimation model for a particular screen with various training and testing sets, and for all cases the percent error between the estimated and actual DOI over the majority of the detector thickness was ±5% with a maximum error of up to ±10% at deeper DOIs. In addition, we found that cartesianDETECT2 is computationally five times more efficient than MANTIS. Findings indicate that DOI estimates can be extracted from a double-Gaussian model of the detector response. We observed that our model predicts DOI in pixelated scintillator detectors reasonably well.

Curvature facilitates prey fixation in predatory insect claws.

PubMed

Petie, Ronald; Muller, Mees

2007-02-21

Insects show a large variety in prey capture strategies, with a correspondingly large diversity in predatory adaptations. We studied a specific type of predatory claws, these can for example be found in praying mantis species. The claw is closeable over its entire length and the prey is fixed between the femur (upper arm) and the tibia (lower arm) of the insect leg. The morphology of these predatory claws is diverse. Some species have straight claws covered with spines, while other species have smooth, curved claws. We have studied the mechanics of this femur-tibia type of predatory insect claws, by making a physical model, eventually trying to explain why in some insect species the claws are curved instead of straight. The main results are (1) when comparing curved claws to straight claws, curvature leads to a strong reduction of forces driving the prey away from the pivoting point, thereby reducing the need for friction generating structures. (2) In the curved claw model a position exists where the resulting force on the prey is exactly zero. This is because the normal forces on the femur and tibia are opposed, and in line. At this position the prey is perfectly clamped and not driven out of the claw. This feature does not exist in straight claws. (3) In the curved claw, the prey cannot be placed at a position further than a certain maximum distance from the pivoting point. Near this maximum position, the resulting force on the prey reaches high values because moment arms are near zero. (4) Between the zero position and the maximum position the resulting force is directed toward the pivoting point, which stabilizes prey fixation.

Invertebrate predation on egg masses of the European cuttlefish, Sepia officinalis: An experimental approach

NASA Astrophysics Data System (ADS)

Martins, Catarina P. P.; Fernández-Álvarez, Fernando Á.; Villanueva, Roger

2018-01-01

The eggs of the European cuttlefish, Sepia officinalis, develop attached to the seafloor in shallow water habitats and possess a relatively thick black capsule that protects them from the surrounding environment. Since embryological development may take several months, eggs are vulnerable to a variety of threats present in shallow waters, including predation. This study investigates predation of S. officinalis eggs by benthic invertebrates. Twenty-eight invertebrate species from 6 different phyla and with diverse feeding habits were tested as potential predators under laboratory conditions. We also investigated how the feeding traits of these species are related to the mechanical ability to break the egg capsule and prey upon cuttlefish embryos. Species that fed on cuttlefish eggs were the sea snail Bolinus brandaris, the crab Cancer pagurus, the hermit crab Dardanus arrosor, the lobster Homarus gammarus, the invasive blue crab Callinectes sapidus, the shrimp Squilla mantis, the sea urchins Echinus melo, Cidaris sp. and Paracentrotus lividus and the starfish Astropecten aranciacus. It is of note that C. sapidus is a potential predatory crab, which raises the concern that this invasive species may constitute a novel threat for cuttlefish eggs as more populations become established in NE Atlantic waters. Of the biological traits examined, prey capture tools in the tested species best explained the experimental feeding results, suggesting that predation of S. officinalis eggs was determined generally by a mechanical factor and highlighting the importance of the protective egg capsule against predators. However, chemosensory factors are likely to be implicated as well. Thus, this work contributes to the understanding of the ecology of early life stages of cuttlefish and the factors that can affect offspring survival and subsequently impact the recruitment of this species.

DC servo motor positioning with anti-windup implementation using C2000 ARM-Texas Instrument

NASA Astrophysics Data System (ADS)

Linggarjati, Jimmy

2017-12-01

One of the most important topics in control system is DC Motor. At this research, a positioning control system for a DC motor is investigated. Firstly, the DC Motor will be paramaterized to get the transfer function model, in order to be simulated in Matlab, and then implemented in a C2000-ARM microcontroller from TI (Texas Instrument). With this investigation, students in control system theory will be able to understand the importance of classical control theories, in relation to the real world implementation of the position control for the DC Motor, escpecially the importance of Anti-Windup technique in real-world implementation.

Implementation and use of a microcomputer-based management information system to monitor dairy herd performance

PubMed Central

Lissemore, Kerry D.; Leslie, Ken E.; Menzies, Paula I.; Martin, S. Wayne; Meek, Alan H.; Etherington, Wayne G.

1992-01-01

A microcomputer-based herd management information system was implemented as part of the herd health program provided to 13 dairy clients by the Ontario Veterinary College, University of Guelph. The study was conducted over a two year period. Data were collected from on-farm event diaries, veterinary visit reports, and production testing information. Selected indices of reproduction, udder health, production, and heifer performance were reported. It was concluded that the implementation of a microcomputer-based information management system, operated as a bureau service, was feasible. However, limitations to the implementation in veterinary practice were identified. PMID:17423945

FPGA Implementation of Reed-Solomon Decoder for IEEE 802.16 WiMAX Systems using Simulink-Sysgen Design Environment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bobrek, Miljko; Albright, Austin P

This paper presents FPGA implementation of the Reed-Solomon decoder for use in IEEE 802.16 WiMAX systems. The decoder is based on RS(255,239) code, and is additionally shortened and punctured according to the WiMAX specifications. Simulink model based on Sysgen library of Xilinx blocks was used for simulation and hardware implementation. At the end, simulation results and hardware implementation performances are presented.

Microprocessor based implementation of attitude and shape control of large space structures

NASA Technical Reports Server (NTRS)

Reddy, A. S. S. R.

1984-01-01

The feasibility of off the shelf eight bit and 16 bit microprocessors to implement linear state variable feedback control laws and assessing the real time response to spacecraft dynamics is studied. The complexity of the dynamic model is described along with the appropriate software. An experimental setup of a beam, microprocessor system for implementing the control laws and the needed generalized software to implement any state variable feedback control system is included.

Toward an evidence-based system for innovation support for implementing innovations with quality: tools, training, technical assistance, and quality assurance/quality improvement.

PubMed

Wandersman, Abraham; Chien, Victoria H; Katz, Jason

2012-12-01

An individual or organization that sets out to implement an innovation (e.g., a new technology, program, or policy) generally requires support. In the Interactive Systems Framework for Dissemination and Implementation, a Support System should work with Delivery Systems (national, state and/or local entities such as health and human service organizations, community-based organizations, schools) to enhance their capacity for quality implementation of innovations. The literature on the Support System [corrected] has been underresearched and under-developedThis article begins to conceptualize theory, research, and action for an evidence-based system for innovation support (EBSIS). EBSIS describes key priorities for strengthening the science and practice of support. The major goal of EBSIS is to enhance the research and practice of support in order to build capacity in the Delivery System for implementing innovations with quality, and thereby, help the Delivery System achieve outcomes. EBSIS is guided by a logic model that includes four key support components: tools, training, technical assistance, and quality assurance/quality improvement. EBSIS uses the Getting To Outcomes approach to accountability to aid the identification and synthesis of concepts, tools, and evidence for support. We conclude with some discussion of the current status of EBSIS and possible next steps, including the development of collaborative researcher-practitioner-funder-consumer partnerships to accelerate accumulation of knowledge on the Support System.

Integrated management system: The integration of ISO 9001, ISO 14001, OHSAS 18001 and ISO 31000

NASA Astrophysics Data System (ADS)

Muzaimi, Hafizzudin; Chew, Boon Cheong; Hamid, Syaiful Rizal

2017-03-01

The implementation of integrated management system (IMS) for better quality management has become a preference for many organizations. This can be seen as many organizations used the combination of quality ISO 9001, an environment ISO 14001 and occupational health and safety management system OHSAS 18001 as a core for the IMS that largely implemented. Besides, the linked between quality management with risk management system need to be identified as the management system that enhance the effectiveness of IMS. Therefore, the risk management system ISO 31000 also presented as a part of integration. In nowadays competitive environment, the increasing pressure and needs from customer or stakeholders make it compulsory for the organization to propose the new system and standards. This paper presents and discusses about the benefit of integration, the management system components that can be converged and the implementation approach. A series of interview was conducted through in-depth interviews with 8 experts in this field, while data collected were analyzed qualitatively. The results consist of 16 factors of IMS implementation that have been identified and the use of PDCA approach for an effective implementation of IMS. As a conclusion, the paper proposes the integration of four management systems (ISO 9001, ISO 14001, OHSAS 18001 and ISO 31000) and on how the IMS can be used to structure the process of management for quality management towards sustainability practices in the organization.

Empirical and conceptual investigation of de-implementation of low-value care from professional and health care system perspectives: a study protocol.

PubMed

Hasson, Henna; Nilsen, Per; Augustsson, Hanna; von Thiele Schwarz, Ulrica

2018-05-15

A considerable proportion of interventions provided to patients lacks evidence of their effectiveness. This implies that patients may receive ineffective, unnecessary, or even harmful care. Thus, in addition to implementing evidence-based practices, there is also a need to abandon interventions that are not based on best evidence, i.e., low-value care. However, research on de-implementation is limited, and there is a lack of knowledge about how effective de-implementation processes should be carried out. The aim of this project is to explore the phenomenon of the de-implementation of low-value health care practices from the perspective of professionals and the health care system. Theories of habits and developmental learning in combination with theories of organizational alignment will be used. The project's work will be conducted in five steps. Step 1 is a scoping review of the literature, and Step 2 has an explorative design involving interviews with health care stakeholders. Step 3 has a prospective design in which workplaces and professionals are shadowed during an ongoing de-implementation. In Step 4, a conceptual framework for de-implementation will be developed based on the previous steps. In Step 5, strategies for de-implementation are identified using a co-design approach. This project contributes new knowledge to implementation science consisting of empirical data, a conceptual framework, and strategy suggestions on de-implementation of low-value care. The professionals' perspectives will be highlighted, including insights into how they make decisions, handle de-implementation in daily practice, and what consequences it has on their work. Furthermore, the health care system perspective will be considered and new knowledge on how de-implementation can be understood across health care system levels will be obtained. The theories of habits and developmental learning can also offer insights into how context triggers and reinforces certain behaviors and how factors at the individual and the organizational levels interact. The project employs a solution-oriented perspective by developing a framework for de-implementation of low-value practices and suggesting practical strategies to improve de-implementation processes at all levels of the health care system. The framework and the strategies can thereafter be evaluated for their validity and impact in future studies.

A Flexible CUDA LU-based Solver for Small, Batched Linear Systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tumeo, Antonino; Gawande, Nitin A.; Villa, Oreste

This chapter presents the implementation of a batched CUDA solver based on LU factorization for small linear systems. This solver may be used in applications such as reactive flow transport models, which apply the Newton-Raphson technique to linearize and iteratively solve the sets of non linear equations that represent the reactions for ten of thousands to millions of physical locations. The implementation exploits somewhat counterintuitive GPGPU programming techniques: it assigns the solution of a matrix (representing a system) to a single CUDA thread, does not exploit shared memory and employs dynamic memory allocation on the GPUs. These techniques enable ourmore » implementation to simultaneously solve sets of systems with over 100 equations and to employ LU decomposition with complete pivoting, providing the higher numerical accuracy required by certain applications. Other currently available solutions for batched linear solvers are limited by size and only support partial pivoting, although they may result faster in certain conditions. We discuss the code of our implementation and present a comparison with the other implementations, discussing the various tradeoffs in terms of performance and flexibility. This work will enable developers that need batched linear solvers to choose whichever implementation is more appropriate to the features and the requirements of their applications, and even to implement dynamic switching approaches that can choose the best implementation depending on the input data.« less

A detailed description of the implementation of inpatient insulin orders with a commercial electronic health record system.

PubMed

Neinstein, Aaron; MacMaster, Heidemarie Windham; Sullivan, Mary M; Rushakoff, Robert

2014-07-01

In the setting of Meaningful Use laws and professional society guidelines, hospitals are rapidly implementing electronic glycemic management order sets. There are a number of best practices established in the literature for glycemic management protocols and programs. We believe that this is the first published account of the detailed steps to be taken to design, implement, and optimize glycemic management protocols in a commercial computerized provider order entry (CPOE) system. Prior to CPOE implementation, our hospital already had a mature glycemic management program. To transition to CPOE, we underwent the following 4 steps: (1) preparation and requirements gathering, (2) design and build, (3) implementation and dissemination, and (4) optimization. These steps required more than 2 years of coordinated work between physicians, nurses, pharmacists, and programmers. With the move to CPOE, our complex glycemic management order sets were successfully implemented without any significant interruptions in care. With feedback from users, we have continued to refine the order sets, and this remains an ongoing process. Successful implementation of glycemic management protocols in CPOE is dependent on broad stakeholder input and buy-in. When using a commercial CPOE system, there may be limitations of the system, necessitating workarounds. There should be an upfront plan to apply resources for continuous process improvement and optimization after implementation. © 2014 Diabetes Technology Society.

Device interoperability and authentication for telemedical appliance based on the ISO/IEEE 11073 Personal Health Device (PHD) Standards.

PubMed

Caranguian, Luther Paul R; Pancho-Festin, Susan; Sison, Luis G

2012-01-01

In this study, we focused on the interoperability and authentication of medical devices in the context of telemedical systems. A recent standard called the ISO/IEEE 11073 Personal Health Device (X73-PHD) Standards addresses the device interoperability problem by defining common protocols for agent (medical device) and manager (appliance) interface. The X73-PHD standard however has not addressed security and authentication of medical devices which is important in establishing integrity of a telemedical system. We have designed and implemented a security policy within the X73-PHD standards. The policy will enable device authentication using Asymmetric-Key Cryptography and the RSA algorithm as the digital signature scheme. We used two approaches for performing the digital signatures: direct software implementation and use of embedded security modules (ESM). The two approaches were evaluated and compared in terms of execution time and memory requirement. For the standard 2048-bit RSA, ESM calculates digital signatures only 12% of the total time for the direct implementation. Moreover, analysis shows that ESM offers more security advantage such as secure storage of keys compared to using direct implementation. Interoperability with other systems was verified by testing the system with LNI Healthlink, a manager software that implements the X73-PHD standard. Lastly, security analysis was done and the system's response to common attacks on authentication systems was analyzed and several measures were implemented to protect the system against them.

Using systems thinking to support clinical system transformation.

PubMed

Best, Allan; Berland, Alex; Herbert, Carol; Bitz, Jennifer; van Dijk, Marlies W; Krause, Christina; Cochrane, Douglas; Noel, Kevin; Marsden, Julian; McKeown, Shari; Millar, John

2016-05-16

Purpose - The British Columbia Ministry of Health's Clinical Care Management initiative was used as a case study to better understand large-scale change (LSC) within BC's health system. Using a complex system framework, the purpose of this paper is to examine mechanisms that enable and constrain the implementation of clinical guidelines across various clinical settings. Design/methodology/approach - Researchers applied a general model of complex adaptive systems plus two specific conceptual frameworks (realist evaluation and system dynamics mapping) to define and study enablers and constraints. Focus group sessions and interviews with clinicians, executives, managers and board members were validated through an online survey. Findings - The functional themes for managing large-scale clinical change included: creating a context to prepare clinicians for health system transformation initiatives; promoting shared clinical leadership; strengthening knowledge management, strategic communications and opportunities for networking; and clearing pathways through the complexity of a multilevel, dynamic system. Research limitations/implications - The action research methodology was designed to guide continuing improvement of implementation. A sample of initiatives was selected; it was not intended to compare and contrast facilitators and barriers across all initiatives and regions. Similarly, evaluating the results or process of guideline implementation was outside the scope; the methods were designed to enable conversations at multiple levels - policy, management and practice - about how to improve implementation. The study is best seen as a case study of LSC, offering a possible model for replication by others and a tool to shape further dialogue. Practical implications - Recommended action-oriented strategies included engaging local champions; supporting local adaptation for implementation of clinical guidelines; strengthening local teams to guide implementation; reducing change fatigue; ensuring adequate resources; providing consistent communication especially for front-line care providers; and supporting local teams to demonstrate the clinical value of the guidelines to their colleagues. Originality/value - Bringing a complex systems perspective to clinical guideline implementation resulted in a clear understanding of the challenges involved in LSC.

A system dynamics evaluation model: implementation of health information exchange for public health reporting

PubMed Central

Merrill, Jacqueline A; Deegan, Michael; Wilson, Rosalind V; Kaushal, Rainu; Fredericks, Kimberly

2013-01-01

Objective To evaluate the complex dynamics involved in implementing electronic health information exchange (HIE) for public health reporting at a state health department, and to identify policy implications to inform similar implementations. Materials and methods Qualitative data were collected over 8 months from seven experts at New York State Department of Health who implemented web services and protocols for querying, receipt, and validation of electronic data supplied by regional health information organizations. Extensive project documentation was also collected. During group meetings experts described the implementation process and created reference modes and causal diagrams that the evaluation team used to build a preliminary model. System dynamics modeling techniques were applied iteratively to build causal loop diagrams representing the implementation. The diagrams were validated iteratively by individual experts followed by group review online, and through confirmatory review of documents and artifacts. Results Three casual loop diagrams captured well-recognized system dynamics: Sliding Goals, Project Rework, and Maturity of Resources. The findings were associated with specific policies that address funding, leadership, ensuring expertise, planning for rework, communication, and timeline management. Discussion This evaluation illustrates the value of a qualitative approach to system dynamics modeling. As a tool for strategic thinking on complicated and intense processes, qualitative models can be produced with fewer resources than a full simulation, yet still provide insights that are timely and relevant. Conclusions System dynamics techniques clarified endogenous and exogenous factors at play in a highly complex technology implementation, which may inform other states engaged in implementing HIE supported by federal Health Information Technology for Economic and Clinical Health (HITECH) legislation. PMID:23292910

A system dynamics evaluation model: implementation of health information exchange for public health reporting.

PubMed

Merrill, Jacqueline A; Deegan, Michael; Wilson, Rosalind V; Kaushal, Rainu; Fredericks, Kimberly

2013-06-01

To evaluate the complex dynamics involved in implementing electronic health information exchange (HIE) for public health reporting at a state health department, and to identify policy implications to inform similar implementations. Qualitative data were collected over 8 months from seven experts at New York State Department of Health who implemented web services and protocols for querying, receipt, and validation of electronic data supplied by regional health information organizations. Extensive project documentation was also collected. During group meetings experts described the implementation process and created reference modes and causal diagrams that the evaluation team used to build a preliminary model. System dynamics modeling techniques were applied iteratively to build causal loop diagrams representing the implementation. The diagrams were validated iteratively by individual experts followed by group review online, and through confirmatory review of documents and artifacts. Three casual loop diagrams captured well-recognized system dynamics: Sliding Goals, Project Rework, and Maturity of Resources. The findings were associated with specific policies that address funding, leadership, ensuring expertise, planning for rework, communication, and timeline management. This evaluation illustrates the value of a qualitative approach to system dynamics modeling. As a tool for strategic thinking on complicated and intense processes, qualitative models can be produced with fewer resources than a full simulation, yet still provide insights that are timely and relevant. System dynamics techniques clarified endogenous and exogenous factors at play in a highly complex technology implementation, which may inform other states engaged in implementing HIE supported by federal Health Information Technology for Economic and Clinical Health (HITECH) legislation.

Parallel asynchronous systems and image processing algorithms

NASA Technical Reports Server (NTRS)

Coon, D. D.; Perera, A. G. U.

1989-01-01

A new hardware approach to implementation of image processing algorithms is described. The approach is based on silicon devices which would permit an independent analog processing channel to be dedicated to evey pixel. A laminar architecture consisting of a stack of planar arrays of the device would form a two-dimensional array processor with a 2-D array of inputs located directly behind a focal plane detector array. A 2-D image data stream would propagate in neuronlike asynchronous pulse coded form through the laminar processor. Such systems would integrate image acquisition and image processing. Acquisition and processing would be performed concurrently as in natural vision systems. The research is aimed at implementation of algorithms, such as the intensity dependent summation algorithm and pyramid processing structures, which are motivated by the operation of natural vision systems. Implementation of natural vision algorithms would benefit from the use of neuronlike information coding and the laminar, 2-D parallel, vision system type architecture. Besides providing a neural network framework for implementation of natural vision algorithms, a 2-D parallel approach could eliminate the serial bottleneck of conventional processing systems. Conversion to serial format would occur only after raw intensity data has been substantially processed. An interesting challenge arises from the fact that the mathematical formulation of natural vision algorithms does not specify the means of implementation, so that hardware implementation poses intriguing questions involving vision science.

A Cloud-Based X73 Ubiquitous Mobile Healthcare System: Design and Implementation

PubMed Central

Ji, Zhanlin; O'Droma, Máirtín; Zhang, Xin; Zhang, Xueji

2014-01-01

Based on the user-centric paradigm for next generation networks, this paper describes a ubiquitous mobile healthcare (uHealth) system based on the ISO/IEEE 11073 personal health data (PHD) standards (X73) and cloud computing techniques. A number of design issues associated with the system implementation are outlined. The system includes a middleware on the user side, providing a plug-and-play environment for heterogeneous wireless sensors and mobile terminals utilizing different communication protocols and a distributed “big data” processing subsystem in the cloud. The design and implementation of this system are envisaged as an efficient solution for the next generation of uHealth systems. PMID:24737958

DOE Office of Scientific and Technical Information (OSTI.GOV)

Walker, La Tonya; Malczynski, Leonard

A Powersim Studio implementation of the system dynamics’ ‘Molecules of Structure’. The original implementation was in Ventana’s Vensim language by James Hines. The molecules are fundamental constructs of the system dynamics simulation methodology.

Systems, methods and apparatus for pattern matching in procedure development and verification

NASA Technical Reports Server (NTRS)

Hinchey, Michael G. (Inventor); Rouff, Christopher A. (Inventor); Rash, James L. (Inventor)

2011-01-01

Systems, methods and apparatus are provided through which, in some embodiments, a formal specification is pattern-matched from scenarios, the formal specification is analyzed, and flaws in the formal specification are corrected. The systems, methods and apparatus may include pattern-matching an equivalent formal model from an informal specification. Such a model can be analyzed for contradictions, conflicts, use of resources before the resources are available, competition for resources, and so forth. From such a formal model, an implementation can be automatically generated in a variety of notations. The approach can improve the resulting implementation, which, in some embodiments, is provably equivalent to the procedures described at the outset, which in turn can improve confidence that the system reflects the requirements, and in turn reduces system development time and reduces the amount of testing required of a new system. Moreover, in some embodiments, two or more implementations can be "reversed" to appropriate formal models, the models can be combined, and the resulting combination checked for conflicts. Then, the combined, error-free model can be used to generate a new (single) implementation that combines the functionality of the original separate implementations, and may be more likely to be correct.

Policy outcomes of applying different nutrient profiling systems in recreational sports settings: the case for national harmonization in Canada.

PubMed

Olstad, Dana Lee; Poirier, Kelly; Naylor, Patti-Jean; Shearer, Cindy; Kirk, Sara F L

2015-08-01

To assess agreement among three nutrient profiling systems used to evaluate the healthfulness of vending machine products in recreation and sport settings in three Canadian provinces. We also assessed whether the nutritional profile of vending machine items in recreation and sport facilities that were adhering to nutrition guidelines (implementers) was superior to that of facilities that were not (non-implementers). Trained research assistants audited the contents of vending machines. Three provincial nutrient profiling systems were used to classify items into each province's most, moderately and least healthy categories. Agreement among systems was assessed using weighted κ statistics. ANOVA assessed whether the average nutritional profile of vending machine items differed according to province and guideline implementation status. Eighteen recreation and sport facilities in three Canadian provinces. One-half of facilities were implementing nutrition guidelines. Snacks (n 531) and beverages (n 618) within thirty-six vending machines were audited. Overall, the systems agreed that the majority of items belonged within their respective least healthy categories (66-69 %) and that few belonged within their most healthy categories (14-22 %). Agreement among profiling systems was moderate to good, with κ w values ranging from 0·49 to 0·69. Implementers offered fewer of the least healthy items (P<0·05) and these items had a better nutritional profile compared with items in non-implementing facilities. The policy outcomes of the three systems are likely to be similar, suggesting there may be scope to harmonize nutrient profiling systems at a national level to avoid unnecessary duplication and support food reformulation by industry.

Comprehensive electronic medical record implementation levels not associated with 30-day all-cause readmissions within Medicare beneficiaries with heart failure.

PubMed

Patterson, M E; Marken, P; Zhong, Y; Simon, S D; Ketcherside, W

2014-01-01

Regulatory standards for 30-day readmissions incentivize hospitals to improve quality of care. Implementing comprehensive electronic health record systems potentially decreases readmission rates by improving medication reconciliation at discharge, demonstrating the additional benefits of inpatient EHRs beyond improved safety and decreased errors. To compare 30-day all-cause readmission incidence rates within Medicare fee-for-service with heart failure discharged from hospitals with full implementation levels of comprehensive EHR systems versus those without. This retrospective cohort study uses data from the American Hospital Association Health IT survey and Medicare Part A claims to measure associations between hospital EHR implementation levels and beneficiary readmissions. Multivariable Cox regressions estimate the hazard ratio of 30-day all-cause readmissions within beneficiaries discharged from hospitals implementing comprehensive EHRs versus those without, controlling for beneficiary health status and hospital organizational factors. Propensity scores are used to account for selection bias. The proportion of heart failure patients with 30-day all-cause readmissions was 30%, 29%, and 32% for those discharged from hospitals with full, some, and no comprehensive EHR systems. Heart failure patients discharged from hospitals with fully implemented comprehensive EHRs compared to those with no comprehensive EHR systems had equivalent 30-day readmission incidence rates (HR = 0.97, 95% CI 0.73 - 1.3). Implementation of comprehensive electronic health record systems does not necessarily improve a hospital's ability to decrease 30-day readmission rates. Improving the efficiency of post-acute care will require more coordination of information systems between inpatient and ambulatory providers.

A Model for Implementing a Career Education System.

ERIC Educational Resources Information Center

Ryan, T. Antoinette

The model for career education implementation defines three major functions which constitute the essential elements in the implementation process: planning, implementation, and evaluation. Emphasis is placed on the interrelatedness of implementation to both planning and evaluation of career education. The 11 subsystems involved in implementing…

A management system for evaluating the Virginia periodic motor vehicle inspection program : software manual and implementation procedures : final report.

DOT National Transportation Integrated Search

1978-01-01

This report deals with the Periodic Motor Vehicle Inspection Management Evaluation System software documentation and implementation procedures. A companion report entitled "A Management System for Evaluating the Virginia Periodic Motor Vehicle Inspec...

Implementation of a pavement management system for Virginia's general aviation airports : final report.

DOT National Transportation Integrated Search

1990-01-01

This report summarizes the activities undertaken to implement a pavement management system at 56 general aviation airports coming under the jurisdiction of the Virginia Department of Aviation (VDOAV). The system, which is called Micro-PAVER, is a pro...

Implementing a Microcomputer Database Management System.

ERIC Educational Resources Information Center

Manock, John J.; Crater, K. Lynne

1985-01-01

Current issues in selecting, structuring, and implementing microcomputer database management systems in research administration offices are discussed, and their capabilities are illustrated with the system used by the University of North Carolina at Wilmington. Trends in microcomputer technology and their likely impact on research administration…

Acupuncture for neck disorders.

PubMed

Trinh, K V; Graham, N; Gross, A R; Goldsmith, C H; Wang, E; Cameron, I D; Kay, T

2006-07-19

Neck pain is one of the three most frequently reported complaints of the musculoskeletal system. Treatments for neck pain are varied, as are the perceptions of benefits. Acupuncture has been used as an alternative to more traditional treatments for musculoskeletal pain. This review summarizes the most current scientific evidence on the effectiveness of acupuncture for acute, subacute and chronic neck pain. To determine the effects of acupuncture for individuals with neck pain. We searched CENTRAL (2006, issue 1) and MEDLINE, EMBASE, MANTIS, CINAHL from their beginning to February 2006. We searched reference lists and the acupuncture database TCMLARS in China. Any published trial using randomized (RCT) or quasi-randomized (quasi-RCT) assignment to the intervention groups, either in full text or abstract form, were included. Two reviewers made independent decisions for each step of the review: article inclusion, data abstraction and assessment of trial methodological quality. Study quality was assessed using the Jadad criteria. Consensus was used to resolve disagreements. When clinical heterogeneity was absent, we combined studies using random-effects meta-analysis models. We did not find any trials that examined the effects of acupuncture for acute or subacute pain, but we found 10 trials that examined acupuncture treatments for chronic neck pain. Overall, methodological quality had a mean of 2.3/5 on the Jadad Scale. For chronic mechanical neck disorders, there was moderate evidence that acupuncture was more effective for pain relief than some types of sham controls, measured immediately post-treatment. There was moderate evidence that acupuncture was more effective than inactive, sham treatments measured immediately post-treatment and at short-term follow-up (pooled standardized mean difference (SMD) -0.37, 95% confidence interval (CI) -0.61 to -0.12). There was limited evidence that acupuncture was more effective than massage at short-term follow-up. For chronic neck disorders with radicular symptoms, there was moderate evidence that acupuncture was more effective than a wait-list control at short-term follow-up. There is moderate evidence that acupuncture relieves pain better than some sham treatments, measured at the end of the treatment. There is moderate evidence that those who received acupuncture reported less pain at short term follow-up than those on a waiting list. There is also moderate evidence that acupuncture is more effective than inactive treatments for relieving pain post-treatment and this is maintained at short-term follow-up.

Facilitators and barriers to effective scale-up of an evidence-based multilevel HIV prevention intervention.

PubMed

Kegeles, Susan M; Rebchook, Gregory; Tebbetts, Scott; Arnold, Emily

2015-04-17

Since the scale-up of HIV/AIDS prevention evidence-based interventions (EBIs) has not been simple, it is important to examine processes that occur in the translation of the EBIs into practice that affect successful implementation. The goal of this paper is to examine facilitators and barriers to effective implementation that arose among 72 community-based organizations as they moved into practice a multilevel HIV prevention intervention EBI, the Mpowerment Project, for young gay and bisexual men. CBOs that were implementing the Mpowerment Project participated in this study and were assessed at baseline, and 6-months, 1 year, and 2 years post-baseline. Semi-structured telephone interviews were conducted separately with individuals at each CBO. Study data came from 647 semi-structured interviews and extensive notes and commentaries from technical assistance providers. Framework Analysis guided the analytic process. Barriers and facilitators to implementation was the overarching thematic framework used across all the cases in our analysis. Thirteen themes emerged regarding factors that influence the successful implementation of the MP. These were organized into three overarching themes: HIV Prevention System Factors, Community Factors, and Intervention Factors. The entire HIV Prevention System, including coordinators, supervisors, executive directors, funders, and national HIV prevention policies, all influenced implementation success. Other Prevention System Factors that affected the effective translation of the EBI into practice include Knowledge About Intervention, Belief in the Efficacy of the Intervention, Desire to Change Existing Prevention Approach, Planning for Intervention Before Implementation, Accountability, Appropriateness of Individuals for Coordinator Positions, Evaluation of Intervention, and Organizational Stability. Community Factors included Geography and Sociopolitical Climate. Intervention Factors included Intervention Characteristics and Adaptation Issues. The entire ecological system in which an EBI occurs affects implementation. It is imperative to focus capacity-building efforts on getting individuals at different levels of the HIV Prevention System into alignment regarding understanding and believing in the program's goals and methods. For a Prevention Support System to be maximally useful, it must address facilitators or barriers to implementation, address the right people, and use modalities to convey information that are acceptable for users of the system.

Designing and Implementing an "Intelligent" Multimedia Tutoring System for Repair Tasks: Final Report.

ERIC Educational Resources Information Center

Baggett, Patricia

1989-01-01

The first part of this document is the final report of a research project (1984-1989) on designing and implementing an intelligent multimedia tutoring system for repair tasks. The problem/goal and approach, equipment and implementation, experimental work, and results are discussed for three phases of research: (1) developing and testing an…

The Role of Organizational Context and External Influences in the Implementation of Evidence-Based Programs: An Exploratory Study. Report IV

ERIC Educational Resources Information Center

Collins, Ashleigh; Burkhauser, Mary

2008-01-01

The implementation of high-quality evidence-based practices cannot occur without facilitative administration, systems-level partnerships, and decision-support data systems. The authors believe that understanding "what works" in program "implementation" is just as important as understanding "what works" in a program "model." Recently, researchers…

A Case Study: Implementing an Interactive Video Instruction System in Teaching Electronics and Industrial Maintenance.

ERIC Educational Resources Information Center

Shipe, Ron; And Others

A study examined the development and implementation of an interactive video instruction system for teaching electronics and industrial maintenance at the University of Tennessee. The specific purposes of the study were to document unusual problems that may be encountered when this new technology is implemented, suggest corrective actions, and…

System-Level Instructional Leadership--A District-Level Leadership Case: Implementing PLCs in Schools

ERIC Educational Resources Information Center

Archbald, Doug

2016-01-01

Objective of the Case--There is a large volume of theoretical and "how to" literature on professional learning communities (PLCs), but little documenting the challenges of implementation and even less on the challenges of system-wide implementation of PLCs. This case is about the role of the central office in initiating and supporting…

Relationship between Systems Coaching and Problem-Solving Implementation Fidelity in a Response-to-Intervention Model

ERIC Educational Resources Information Center

March, Amanda L.; Castillo, Jose M.; Batsche, George M.; Kincaid, Donald

2016-01-01

The literature on RTI has indicated that professional development and coaching are critical to facilitating problem-solving implementation with fidelity. This study examined the extent to which systems coaching related to the fidelity of problem-solving implementation in 31 schools from six districts. Schools participated in three years of a…

Implementing an Enterprise Information System to Reengineer and Streamline Administrative Processes in a Distance Learning Unit

ERIC Educational Resources Information Center

Abdous, M'hammed; He, Wu

2009-01-01

During the past three years, we have developed and implemented an enterprise information system (EIS) to reengineer and facilitate the administrative process for preparing and teaching distance learning courses in a midsized-to-large university (with 23,000 students). The outcome of the implementation has been a streamlined and efficient process…

Factors Preventing the Successful Implementation of Information Systems: Case of the Elementary Public Education in Mexico

ERIC Educational Resources Information Center

Patiño, Israel

2015-01-01

This paper aims to identify the factors that impede the successful implementation of information systems in the case of primary public education for the systematization of administrative and operational processes. Once identified and diagnosed the cause, the proposal is made, in order to ensure that implementation. This aided with scientific…

Implementing an Open Source Learning Management System: A Critical Analysis of Change Strategies

ERIC Educational Resources Information Center

Uys, Philip M.

2010-01-01

This paper analyses the change and innovation strategies that Charles Sturt University (CSU) used from 2007 to 2009 during the implementation and mainstreaming of an open source learning management system (LMS), Sakai, named locally as "CSU Interact". CSU was in January 2008 the first Australian University to implement an open source…

Moving from Good Ideas in Educational Systems Change to Sustainable Program Implementation: Coming to Terms with Some of the Realities

ERIC Educational Resources Information Center

Noell, George H.; Gansle, Kristin A.

2009-01-01

Proponents of systemic changes in education commonly encounter ethical, theoretical, and pragmatic challenges in moving from possibility to implementation of their vision of change. Although ethical and theoretical issues are critically important to a successful change initiative, pragmatic issues relevant to assuring program implementation have…

Using iKidTools™ Software Support Systems to Develop and Implement Self-Monitoring Interventions

ERIC Educational Resources Information Center

Patti, Angela L.; Miller, Kevin J.

2011-01-01

Educational teams often are faced with the task of developing and implementing Behavioral Intervention Plans (BIPs) for students who present challenging and/or disruptive behaviors. This article describes the steps used to develop and implement a self-monitoring BIP that incorporated an innovative software system, iKidTools™. An authentic case…

Acceptance of lean redesigns in primary care: A contextual analysis.

PubMed

Hung, Dorothy; Gray, Caroline; Martinez, Meghan; Schmittdiel, Julie; Harrison, Michael I

Lean is a leading change strategy used in health care to achieve short-term efficiency and quality improvement while promising longer-term system transformation. Most research examines Lean intervention to address isolated problems, rather than to achieve broader systemic changes to care delivery. Moreover, no studies examine contextual influences on system-wide Lean implementation efforts in primary care. The aim of this study was to identify contextual factors most critical to implementing and scaling Lean redesigns across all primary care clinics in a large, ambulatory care delivery system. Over 100 interviews and focus groups were conducted with frontline physicians, clinical staff, and operational leaders. Data analysis was guided by a modified Consolidated Framework for Implementation Research (CFIR), a popular implementation science framework. On the basis of expert recommendations, the modified framework targets factors influencing the implementation of process redesigns. This modified framework, the CFIR-PR, informed our identification of contextual factors that most impacted Lean acceptance among frontline physicians and staff. Several domains identified by the CFIR-PR were critical to acceptance of Lean redesigns. Regarding the implementation process acceptance was influenced by time and intensity of exposure to changes, "top-down" versus "bottom-up" implementation styles, and degrees of employee engagement in developing new workflows. Important factors in the inner setting were the clinic's culture and style of leadership, along with availability of information about Lean's effectiveness. Last, implementation efforts were impacted by individual and team characteristics regarding changed work roles and related issues of professional identity, authority, and autonomy. This study underscores the need for change leaders to consider the contextual factors that surround efforts to implement Lean in primary care. As Lean redesigns are scaled across a system, special attention is warranted with respect to the implementation approach, internal clinic setting, and implications for professional roles and identities of physicians and staff.

Experiences sharing of implementing Template-based Electronic Medical Record System (TEMRS) in a Hong Kong medical organization.

PubMed

Ting, S L; Kwok, S K; Tsang, Albert H C; Lee, W B; Yee, K F

2011-12-01

This paper aims to investigate the efficacy and feasibility of Template-based Electronic Medical Record System (TEMRS) and factors for its successful implementation. A TEMRS was designed and implemented in one core clinic of a Hong Kong professional multi-disciplinary medical services provider with four core clinics located in different parts of Hong Kong. Eight doctors participated in the study. Surveys and interviews were conducted to acquire the users' feedback and satisfaction level. The design, development, and the factors related to the success of the implementation of TEMRS were analyzed. In the study period, 3,032 cases were collected. The most encountered diagnosis were upper respiratory tract infection (50.59%), gastroenteritis (10.19%), dermatitis (5.87%), dyspepsia (5.28%) and rhinitis (4.82%). The system gained an overall satisfaction by the users and the most satisfied areas were rapid retrieving the necessary information of patient (75%) and fasten the diagnostic selection (75%). TEMRS is an enabling system which can reduce the user resistance in new technology with its flexibility. The consideration of cost, security, human, technical, data migration and standardization issues are essential in the implementation of the TEMRS and further research should be conducted to expand the TEMRS's implementation in health care system.

Archetype Model-Driven Development Framework for EHR Web System.

PubMed

Kobayashi, Shinji; Kimura, Eizen; Ishihara, Ken

2013-12-01

This article describes the Web application framework for Electronic Health Records (EHRs) we have developed to reduce construction costs for EHR sytems. The openEHR project has developed clinical model driven architecture for future-proof interoperable EHR systems. This project provides the specifications to standardize clinical domain model implementations, upon which the ISO/CEN 13606 standards are based. The reference implementation has been formally described in Eiffel. Moreover C# and Java implementations have been developed as reference. While scripting languages had been more popular because of their higher efficiency and faster development in recent years, they had not been involved in the openEHR implementations. From 2007, we have used the Ruby language and Ruby on Rails (RoR) as an agile development platform to implement EHR systems, which is in conformity with the openEHR specifications. We implemented almost all of the specifications, the Archetype Definition Language parser, and RoR scaffold generator from archetype. Although some problems have emerged, most of them have been resolved. We have provided an agile EHR Web framework, which can build up Web systems from archetype models using RoR. The feasibility of the archetype model to provide semantic interoperability of EHRs has been demonstrated and we have verified that that it is suitable for the construction of EHR systems.

Chemical Tracking Systems: Not Your Usual Global Positioning System!

ERIC Educational Resources Information Center

Roy, Ken

2007-01-01

The haphazard storing and tracking of chemicals in the laboratory is a serious safety issue facing science teachers. To get control of your chemicals, try implementing a "chemical tracking system". A chemical tracking system (CTS) is a database of chemicals used in the laboratory. If implemented correctly, a CTS will reduce purchasing costs,…

Alternative Delivery Systems for the Computer-Aided Instruction Study Management System (CAISMS).

ERIC Educational Resources Information Center

Nievergelt, Jurg; And Others

The Computer-Assisted Instruction Study Management System (CAISMS) was developed and implemented on the PLATO system to monitor and guide student study of text materials. It administers assignments, gives quizzes, and automatically keeps track of a student's progress. This report describes CAISMS and several hypothetical implementations of CAISMS…