Restrictive Citizenship: Civic-Oriented Service-Learning Opportunities for All Students

ERIC Educational Resources Information Center

Mann, Jay A.; Dymond, Stacy K.; Bonati, Michelle L.; Neeper, Lance S.

2015-01-01

Citizenship education that uses service-learning continues to be implemented in a manner that may restrict many students from full, meaningful participation. The authors contend that much of the literature on civic-oriented service-learning unnecessarily positions successful projects at the extremes: (a) political socialization versus civic…

The QUASAR Project: The "Revolution of the Possible" in Mathematics Instructional Reform in Urban Middle Schools.

ERIC Educational Resources Information Center

Silver, Edward A.; Stein, Mary Kay

1996-01-01

Examines critical features of the QUASAR Project, a mathematics instruction program oriented toward helping students develop a meaningful understanding of mathematical ideas through challenging mathematical tasks, and discusses findings regarding the positive impact it has had on students. Challenges and obstacles in implementing the project are…

Designing an orientation program for new faculty.

PubMed

Holyfield, Lavern J; Berry, Charles W

2008-12-01

The Faculty Development Committee (FDC) at Baylor College of Dentistry (BCD) is charged with providing programs and activities that facilitate the success of existing faculty in the constantly changing environment of academia. In response to concerns regarding the challenges wrought by current and projected shortages of dental faculty across the nation, the FDC was prompted to assess development opportunities available to BCD faculty. A professional development resource that we found deficient was a formal, comprehensive orientation program for newly hired faculty. To guide the efforts of the committee in developing this program, a survey was designed and administered during an annual faculty retreat. Respondents were new and junior faculty, senior faculty, and some administrators. The results of the survey to determine requirements for new faculty orientation became the basis for formalizing BCD's new faculty orientation program. This article provides an overview of the new faculty orientation process from design to program implementation and describes the development and use of a faculty survey to determine the fundamental elements of a faculty development program, identification of essential individuals for designing/implementing the program, and implementation of a new faculty orientation program at BCD.

Project Integration Architecture: Application Architecture

NASA Technical Reports Server (NTRS)

Jones, William Henry

2005-01-01

The Project Integration Architecture (PIA) implements a flexible, object-oriented, wrapping architecture which encapsulates all of the information associated with engineering applications. The architecture allows the progress of a project to be tracked and documented in its entirety. Additionally, by bringing all of the information sources and sinks of a project into a single architectural space, the ability to transport information between those applications is enabled.

Historical Roots of the Project Approach in the United States: 1850-1930.

ERIC Educational Resources Information Center

DuCharme, Catherine C.

This paper contends that the historical roots of the project approach in the United States can give strength to early childhood educators today, offering insight and models for the implementation of child-oriented curriculum. The project approach to teaching and learning evolved as a result of the educational ideas of Friedrich Froebel, William…

Meta-Assessment in a Project-Based Systems Engineering Course

ERIC Educational Resources Information Center

Wengrowicz, Niva; Dori, Yehudit Judy; Dori, Dov

2017-01-01

Project-based learning (PBL) facilitates significant learning, but it poses a major assessment challenge for assessing individual content knowledge. We developed and implemented an assessment approach and tool for a mandatory undergraduate systems engineering PBL-based course. We call this type of assessment "student-oriented"…

Agri-Environmental Policy Measures in Israel: The Potential of Using Market-Oriented Instruments

NASA Astrophysics Data System (ADS)

Amdur, Liron; Bertke, Elke; Freese, Jan; Marggraf, Rainer

2011-05-01

This paper examines the possibilities of developing agri-environmental policy measures in Israel, focusing on market-oriented instruments. A conceptual framework for developing agri-environmental policy measures is presented, first in very broad lines (mandatory regulations, economic instruments and advisory measures) and subsequently focusing on economic instruments, and specifically, on market-oriented ones. Two criteria of choice between the measures are suggested: their contribution to improving the effectiveness of the policy; and the feasibility of their implementation. This is the framework used for analyzing agri-environmental measures in Israel. Israel currently implements a mix of mandatory regulations, economic instruments and advisory measures to promote the agri-environment. The use of additional economic instruments may improve the effectiveness of the policy. When comparing the effectiveness of various economic measures, we found that the feasibility of implementation of market-oriented instruments is greater, due to the Israeli public's preference for strengthening market orientation in the agricultural sector. Four market-oriented instruments were practiced in a pilot project conducted in an Israeli rural area. We found that in this case study, the institutional feasibility and acceptance by stakeholders were the major parameters influencing the implementation of the market-oriented instruments, whereas the instruments' contribution to enhancing the ecological or economic effectiveness were hardly considered by the stakeholders as arguments in favor of their use.

Agri-environmental policy measures in Israel: the potential of using market-oriented instruments.

PubMed

Amdur, Liron; Bertke, Elke; Freese, Jan; Marggraf, Rainer

2011-05-01

This paper examines the possibilities of developing agri-environmental policy measures in Israel, focusing on market-oriented instruments. A conceptual framework for developing agri-environmental policy measures is presented, first in very broad lines (mandatory regulations, economic instruments and advisory measures) and subsequently focusing on economic instruments, and specifically, on market-oriented ones. Two criteria of choice between the measures are suggested: their contribution to improving the effectiveness of the policy; and the feasibility of their implementation. This is the framework used for analyzing agri-environmental measures in Israel. Israel currently implements a mix of mandatory regulations, economic instruments and advisory measures to promote the agri-environment. The use of additional economic instruments may improve the effectiveness of the policy. When comparing the effectiveness of various economic measures, we found that the feasibility of implementation of market-oriented instruments is greater, due to the Israeli public's preference for strengthening market orientation in the agricultural sector. Four market-oriented instruments were practiced in a pilot project conducted in an Israeli rural area. We found that in this case study, the institutional feasibility and acceptance by stakeholders were the major parameters influencing the implementation of the market-oriented instruments, whereas the instruments' contribution to enhancing the ecological or economic effectiveness were hardly considered by the stakeholders as arguments in favor of their use.

Netlist Oriented Sensitivity Evaluation (NOSE)

DTIC Science & Technology

2017-03-01

developing methodologies to assess sensitivities of alternative chip design netlist implementations. The research is somewhat foundational in that such...Netlist-Oriented Sensitivity Evaluation (NOSE) project was to develop methodologies to assess sensitivities of alternative chip design netlist...analysis to devise a methodology for scoring the sensitivity of circuit nodes in a netlist and thus providing the raw data for any meaningful

POLizied e-Learning Using Contract Management

ERIC Educational Resources Information Center

Espinosa, Espinosa David; Noguez, Julieta; Benes, Bedrich; Bueno, Abel

2005-01-01

We present an innovative way to manage online learning by administering experiential learning activities during a semester-long, web-based course that is designed with the Project Oriented Learning methodology. A consulting-style guiding thread for in-class and remote workshops is implemented using a professionally relevant project contract that…

An NAFP Project: Use of Object Oriented Methodologies and Design Patterns to Refactor Software Design

NASA Technical Reports Server (NTRS)

Shaykhian, Gholam Ali; Baggs, Rhoda

2007-01-01

In the early problem-solution era of software programming, functional decompositions were mainly used to design and implement software solutions. In functional decompositions, functions and data are introduced as two separate entities during the design phase, and are followed as such in the implementation phase. Functional decompositions make use of refactoring through optimizing the algorithms, grouping similar functionalities into common reusable functions, and using abstract representations of data where possible; all these are done during the implementation phase. This paper advocates the usage of object-oriented methodologies and design patterns as the centerpieces of refactoring software solutions. Refactoring software is a method of changing software design while explicitly preserving its external functionalities. The combined usage of object-oriented methodologies and design patterns to refactor should also benefit the overall software life cycle cost with improved software.

Hip2Norm: an object-oriented cross-platform program for 3D analysis of hip joint morphology using 2D pelvic radiographs.

PubMed

Zheng, G; Tannast, M; Anderegg, C; Siebenrock, K A; Langlotz, F

2007-07-01

We developed an object-oriented cross-platform program to perform three-dimensional (3D) analysis of hip joint morphology using two-dimensional (2D) anteroposterior (AP) pelvic radiographs. Landmarks extracted from 2D AP pelvic radiographs and optionally an additional lateral pelvic X-ray were combined with a cone beam projection model to reconstruct 3D hip joints. Since individual pelvic orientation can vary considerably, a method for standardizing pelvic orientation was implemented to determine the absolute tilt/rotation. The evaluation of anatomically morphologic differences was achieved by reconstructing the projected acetabular rim and the measured hip parameters as if obtained in a standardized neutral orientation. The program had been successfully used to interactively objectify acetabular version in hips with femoro-acetabular impingement or developmental dysplasia. Hip(2)Norm is written in object-oriented programming language C++ using cross-platform software Qt (TrollTech, Oslo, Norway) for graphical user interface (GUI) and is transportable to any platform.

Short Course on Implementation of Zone Technology in the Repair and Overhaul Environment

DTIC Science & Technology

1996-04-01

Pier Zone & Sys Pier/DD/Staging Zone Management Approach Varies Function to Project Project/Matrix Project/Matrix Project Project Fig. 9-3. Nature of...intractable problems that currently exist. Nature can give us many clues. If only we could harness the material that makes the dolphin’s outer shell so smooth...the natural effect of requiring peak manning and confined outfitting schedules. Through the application of system oriented logic to actual work accom

Project WISE: Building STEM-Focused Youth-Programs that Serve the Community

ERIC Educational Resources Information Center

DiLisi, Gregory A.; McMillin, Keith A.; Virostek, Margaret E.

2011-01-01

We describe the design and implementation of Project WISE, a multi-institutional partnership that assembles interdisciplinary teams of undergraduate and high school students charged with developing STEM-focused community youth-programs. Our goal is twofold: (i.) to promote young women's interest in STEM-oriented careers through an early, positive…

Evaluation of the Mobile Training Team Projects (1996-2003): Final Report

ERIC Educational Resources Information Center

Online Submission, 2005

2005-01-01

Background: For more than 30 years since 1972, the Government of Japan has contributed funds to UNESCO for implementation of the Mobile Training Team (MTT) projects. The MTT assists Member States enhance their capacity in development oriented educational innovation through intra-country study visits, training courses, workshops and technical…

Project Portfolio Management for Academic Libraries: A Gentle Introduction

ERIC Educational Resources Information Center

Vinopal, Jennifer

2012-01-01

In highly dynamic, service-oriented environments like academic libraries, much staff time is spent on initiatives to implement new products and services to meet users' evolving needs. Yet even in an environment where a sound project management process is applied, if we're not properly planning, managing, and controlling the organization's work in…

MLeXAI: A Project-Based Application-Oriented Model

ERIC Educational Resources Information Center

Russell, Ingrid; Markov, Zdravko; Neller, Todd; Coleman, Susan

2010-01-01

Our approach to teaching introductory artificial intelligence (AI) unifies its diverse core topics through a theme of machine learning, and emphasizes how AI relates more broadly with computer science. Our work, funded by a grant from the National Science Foundation, involves the development, implementation, and testing of a suite of projects that…

The Relationship between Project-Based Learning and Rigor in STEM-Focused High Schools

ERIC Educational Resources Information Center

Edmunds, Julie; Arshavsky, Nina; Glennie, Elizabeth; Charles, Karen; Rice, Olivia

2016-01-01

Project-based learning (PjBL) is an approach often favored in STEM classrooms, yet some studies have shown that teachers struggle to implement it with academic rigor. This paper explores the relationship between PjBL and rigor in the classrooms of ten STEM-oriented high schools. Utilizing three different data sources reflecting three different…

The Rescue911 Emergency Response Information System (ERIS): A Systems Development Project Case

ERIC Educational Resources Information Center

Cohen, Jason F.; Thiel, Franz H.

2010-01-01

This teaching case presents a systems development project useful for courses in object-oriented analysis and design. The case has a strong focus on the business, methodology, modeling and implementation aspects of systems development. The case is centered on a fictitious ambulance and emergency services company (Rescue911). The case describes that…

Emergent Data-Driven Approaches to School Improvement: The Journey of Three Schools through Self-Evaluation

ERIC Educational Resources Information Center

Karagiorgi, Yiasemina; Nicolaidou, Maria; Yiasemis, Christos; Georghiades, Petros

2015-01-01

This article aims to illustrate a school self-evaluation project implemented in three Cyprus primary schools. The project adopted three theoretical assumptions, namely, an orientation towards school improvement, a participatory school-level approach allowing support from a critical friend and a focus on effective teaching. In line with a…

Conditions for successfully implementing resident-oriented care in nursing homes.

PubMed

Berkhout, Afke J M B; Boumans, Nicolle P G; Mur, Ingrid; Nijhuis, Frans J N

2009-06-01

This study reports an investigation of the conditions for a successful introduction of a resident-oriented care model on six somatic and psychogeriatric intervention wards in three Dutch nursing homes. This study aims to answer the following research question: 'What are the conditions for successfully implementing resident-oriented care?' To answer the research question, the organisational change process was monitored by using the '7-S' model of Peters and Waterman as a diagnostic framework. Based on this model, the following change characteristics were studied: structure, strategy, systems, staff, skills, style and shared values. Our study involved a one group pretest/post-test design. To measure the conditions for change, we operationalised the factors of the 7-S model serving as a diagnostic framework and studied their presence and nature on the intervention wards. For this purpose qualitative interviews were held with the change agents of the nursing homes and the wards' supervisors. To determine the degree of 'success' of the implementation, we measured the extent to which resident-oriented care was implemented. For this purpose a quantitative questionnaire was filled in by the nurses of the intervention wards. By relating the extent to which resident-oriented care was implemented to the differences in change conditions, we were able to distinguish the 'most' from the 'least' successful intervention ward and so, pointing out the conditions contributing to a successful implementation of resident-oriented care. The results showed that, in contrast to the least successful intervention ward, the most successful intervention ward was characterised by success conditions related to the 7-S model factors strategy, systems, staff and skills. The factor structure did not contribute to the success of the implementation. Success conditions appeared to be related to the ward level and not to the organisational or project level. Especially the supervisors' role appeared to be crucial for a successful implementation.

Predictive Engineering Tools for Injection-Molded Long-Carbon-Fiber Thermoplastic Composites. Topical Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nguyen, Ba Nghiep; Fifield, Leonard S.; Wang, Jin

2016-06-01

This project aimed to integrate, optimize, and validate the fiber orientation and length distribution models previously developed and implemented in the Autodesk® Simulation Moldflow® Insight (ASMI) software package for injection-molded long-carbon-fiber (LCF) thermoplastic composite structures. The project was organized into two phases. Phase 1 demonstrated the ability of the advanced ASMI package to predict fiber orientation and length distributions in LCF/polypropylene (PP) and LCF/polyamide-6, 6 (PA66) plaques within 15% of experimental results. Phase 2 validated the advanced ASMI package by predicting fiber orientation and length distributions within 15% of experimental results for a complex three-dimensional (3D) Toyota automotive part injection-moldedmore » from LCF/PP and LCF/PA66 materials. Work under Phase 2 also included estimate of weight savings and cost impacts for a vehicle system using ASMI and structural analyses of the complex part. The present report summarizes the completion of Phases 1 and 2 work activities and accomplishments achieved by the team comprising Pacific Northwest National Laboratory (PNNL); Purdue University (Purdue); Virginia Polytechnic Institute and State University (Virginia Tech); Autodesk, Inc. (Autodesk); PlastiComp, Inc. (PlastiComp); Toyota Research Institute North America (Toyota); Magna Exteriors and Interiors Corp. (Magna); and University of Illinois. Figure 1 illustrates the technical approach adopted in this project that progressed from compounding LCF/PP and LCF/PA66 materials, to process model improvement and implementation, to molding and modeling LCF/PP and LCF/PA66 plaques. The lessons learned from the plaque study and the successful validation of improved process models for fiber orientation and length distributions for these plaques enabled the project to go to Phase 2 to mold, model, and optimize the 3D complex part.« less

EChem++--an object-oriented problem solving environment for electrochemistry. 2. The kinetic facilities of Ecco--a compiler for (electro-)chemistry.

PubMed

Ludwig, Kai; Speiser, Bernd

2004-01-01

We describe a modeling software component Ecco, implemented in the C++ programming language. It assists in the formulation of physicochemical systems including, in particular, electrochemical processes within general geometries. Ecco's kinetic part then translates any user defined reaction mechanism into an object-oriented representation and generates the according mathematical model equations. The input language, its grammar, the object-oriented design of Ecco, based on design patterns, and its integration into the open source software project EChem++ are discussed. Application Strategies are given.

Advanced Computing Technologies for Rocket Engine Propulsion Systems: Object-Oriented Design with C++

NASA Technical Reports Server (NTRS)

Bekele, Gete

2002-01-01

This document explores the use of advanced computer technologies with an emphasis on object-oriented design to be applied in the development of software for a rocket engine to improve vehicle safety and reliability. The primary focus is on phase one of this project, the smart start sequence module. The objectives are: 1) To use current sound software engineering practices, object-orientation; 2) To improve on software development time, maintenance, execution and management; 3) To provide an alternate design choice for control, implementation, and performance.

Redesigning Orientation in an Intensive Care Unit Using 2 Theoretical Models.

PubMed

Kozub, Elizabeth; Hibanada-Laserna, Maribel; Harget, Gwen; Ecoff, Laurie

2015-01-01

To accommodate a higher demand for critical care nurses, an orientation program in a surgical intensive care unit was revised and streamlined. Two theoretical models served as a foundation for the revision and resulted in clear clinical benchmarks for orientation progress evaluation. The purpose of the project was to integrate theoretical frameworks into practice to improve the unit orientation program. Performance improvement methods served as a framework for the revision, and outcomes were measured before and after implementation. The revised orientation program increased 1- and 2-year nurse retention and decreased turnover. Critical care knowledge increased after orientation for both the preintervention and postintervention groups. Incorporating a theoretical basis for orientation has been shown to be successful in increasing the number of nurses completing orientation and improving retention, turnover rates, and knowledge gained.

VIMOS Instrument Control Software Design: an Object Oriented Approach

NASA Astrophysics Data System (ADS)

Brau-Nogué, Sylvie; Lucuix, Christian

2002-12-01

The Franco-Italian VIMOS instrument is a VIsible imaging Multi-Object Spectrograph with outstanding multiplex capabilities, allowing to take spectra of more than 800 objects simultaneously, or integral field spectroscopy mode in a 54x54 arcsec area. VIMOS is being installed at the Nasmyth focus of the third Unit Telescope of the European Southern Observatory Very Large Telescope (VLT) at Mount Paranal in Chile. This paper will describe the analysis, the design and the implementation of the VIMOS Instrument Control System, using UML notation. Our Control group followed an Object Oriented software process while keeping in mind the ESO VLT standard control concepts. At ESO VLT a complete software library is available. Rather than applying waterfall lifecycle, ICS project used iterative development, a lifecycle consisting of several iterations. Each iteration consisted in : capture and evaluate the requirements, visual modeling for analysis and design, implementation, test, and deployment. Depending of the project phases, iterations focused more or less on specific activity. The result is an object model (the design model), including use-case realizations. An implementation view and a deployment view complement this product. An extract of VIMOS ICS UML model will be presented and some implementation, integration and test issues will be discussed.

Learning to Fly: Family-Oriented Literacy Education in Schools. Celebrating the Tenth Anniversary of Hamburg's Family Literacy Project 2004-2014

ERIC Educational Resources Information Center

Rabkin, Gabriele, Ed.; Roche, Stephen, Ed.

2014-01-01

This book was published to mark the tenth anniversary of Hamburg's award-winning Family Literacy project (FLY). It includes contributions from key stakeholders--academics, teachers, parents and children--participating in the conceptualization and implementation of FLY in the city of Hamburg. FLY mainly targets people from socially disadvantaged…

Innovative methods of popularizing technical education

NASA Astrophysics Data System (ADS)

Shkitsa, L. Y.; Panchuk, V. G.; Kornuta, V. A.

2017-05-01

There have been analyzed reasons of the loss of technical education’s popularity. Also, the analysis of known educational and production methods, oriented at the innovative model of development of society, was performed. It is stated that the acquisition of 21st century’s skills as a result of competition of technical education are natural for the DIY ideology, which was realized in the institutions like Fab Lab. The new educational strategy, based on project-based learning, is proposed to be implemented as a special laboratory with equipment, which would be a center of innovative development for students at the Technical University. Moreover, the list of projects planned for implementation, that includes not only projects, specific to a particular university, but also projects, demanded by society as a whole, is specified. It is worth to implement trendy projects in the laboratory, such as toy-like, ecological projects; projects of the energy dependence decrease or the energy efficiency increase, modern digital or innovative projects etc. The student should gain knowledge, skills and, possibly, equipment that are available for immediate usage on the labor market or for the realization of his own projects or the community’s projects in everyday life after the realization of the particular project at the laboratory

GetData: A filesystem-based, column-oriented database format for time-ordered binary data

NASA Astrophysics Data System (ADS)

Wiebe, Donald V.; Netterfield, Calvin B.; Kisner, Theodore S.

2015-12-01

The GetData Project is the reference implementation of the Dirfile Standards, a filesystem-based, column-oriented database format for time-ordered binary data. Dirfiles provide a fast, simple format for storing and reading data, suitable for both quicklook and analysis pipelines. GetData provides a C API and bindings exist for various other languages. GetData is distributed under the terms of the GNU Lesser General Public License.

Engaging patients as partners in health research: Lessons from BC, Canada.

PubMed

Holmes, Bev J; Bryan, Stirling; Ho, Kendall; McGavin, Colleen

2018-03-01

Canada is seeing increased interest in engaging patients in health research, recognizing the potential to improve its relevance and quality. The momentum is promising, but there may be a tendency to ignore the challenges inherent when lay people and professionals collaborate. We address some of these challenges as they relate to recruitment, training, and support for patients at the British Columbia (BC) Support for People and Patient-Oriented Research Unit, part of Canada's Strategy for Patient-Oriented Research. A retrospective review of a telehealth project demonstrates that, as well as the practical elements of recruitment, training, and support, attention must be paid to issues of credibility, legitimacy, and power when engaging patients. We propose that all patient-oriented research projects would benefit from using a similar framework to guide patient engagement planning and implementation, helping to anticipate and mitigate challenges from the outset. Projects would ideally also include the study of patient engagement methods, to add to this important body of knowledge.

Analysis, requirements and development of a collaborative social and medical services data model.

PubMed

Bobroff, R B; Petermann, C A; Beck, J R; Buffone, G J

1994-01-01

In any medical and social service setting, patient data must be readily shared among multiple providers for delivery of expeditious, quality care. This paper describes the development and implementation of a generalized social and medical services data model for an ambulatory population. The model, part of the Collaborative Social and Medical Services System Project, is based on the data needs of the Baylor College of Medicine Teen Health Clinics and follows the guidelines of the ANSI HISPP/MSDS JWG for a Common Data Model. Design details were determined by informal staff interviews, operational observations, and examination of clinic guidelines and forms. The social and medical services data model is implemented using object-oriented data modeling techniques and will be implemented in C++ using an Object-Oriented Database Management System.

Implementing Sustainable Engineering Education through POPBL

NASA Astrophysics Data System (ADS)

Lioe, D. X.; Subhashini, G. K.

2013-06-01

This paper presents the implementation of sustainable engineering education to undergraduate student in Asia Pacific University of Technology and Innovation, Malaysia (APU) through Project-Oriented Problem Based Learning (POPBL). Sustainable engineering has already been the paramount term where it is no longer limited to environment, but also to the entire lifetime of the individual engineer. To inculcate every engineering individual with sustainability, education is the way to start off.

Development and Pilot Test of a Career-Oriented, Peer-Instructional Model in the Office Cluster of Business Occupations. Final Report.

ERIC Educational Resources Information Center

Hungerland, Jacklyn; And Others

This project was conducted to design an instructional model capable of producing high levels of student motivation and proficiency, using the office cluster of business occupations as a vehicle, and to formulate a plan for field implementation and evaluation of the model. To achieve the objectives, project personnel, secondary business teachers,…

INSA Hand Puppet Training Manual: Involving U.S. Citizens in a Puppetmaking Project To Enhance the Use of Educational Puppet Theater in Developing Nations.

ERIC Educational Resources Information Center

Carter, David A.

Designed to help U.S. citizens become aware of the needs of people living in developing countries, this puppet project is an action oriented education program implemented by the International Service Association for Health, Inc. (INSA). The program's primary purpose is to inform citizens about global concerns and issues while enlisting public…

The Integration of Biology into Calculus Courses

ERIC Educational Resources Information Center

Comar, Timothy D.

2008-01-01

This article discusses the incorporation of biological content into existing calculus courses without significantly changing the courses. This is exemplified by the common laboratory course taken by students in all first semester calculus courses at Benedictine University. Several biologically oriented projects are implemented in this laboratory…

Advanced software development workstation. Comparison of two object-oriented development methodologies

NASA Technical Reports Server (NTRS)

Izygon, Michel E.

1992-01-01

This report is an attempt to clarify some of the concerns raised about the OMT method, specifically that OMT is weaker than the Booch method in a few key areas. This interim report specifically addresses the following issues: (1) is OMT object-oriented or only data-driven?; (2) can OMT be used as a front-end to implementation in C++?; (3) the inheritance concept in OMT is in contradiction with the 'pure and real' inheritance concept found in object-oriented (OO) design; (4) low support for software life-cycle issues, for project and risk management; (5) uselessness of functional modeling for the ROSE project; and (6) problems with event-driven and simulation systems. The conclusion of this report is that both Booch's method and Rumbaugh's method are good OO methods, each with strengths and weaknesses in different areas of the development process.

Federating Metadata Catalogs

NASA Astrophysics Data System (ADS)

Baru, C.; Lin, K.

2009-04-01

The Geosciences Network project (www.geongrid.org) has been developing cyberinfrastructure for data sharing in the Earth Science community based on a service-oriented architecture. The project defines a standard "software stack", which includes a standardized set of software modules and corresponding service interfaces. The system employs Grid certificates for distributed user authentication. The GEON Portal provides online access to these services via a set of portlets. This service-oriented approach has enabled the GEON network to easily expand to new sites and deploy the same infrastructure in new projects. To facilitate interoperation with other distributed geoinformatics environments, service standards are being defined and implemented for catalog services and federated search across distributed catalogs. The need arises because there may be multiple metadata catalogs in a distributed system, for example, for each institution, agency, geographic region, and/or country. Ideally, a geoinformatics user should be able to search across all such catalogs by making a single search request. In this paper, we describe our implementation for such a search capability across federated metadata catalogs in the GEON service-oriented architecture. The GEON catalog can be searched using spatial, temporal, and other metadata-based search criteria. The search can be invoked as a Web service and, thus, can be imbedded in any software application. The need for federated catalogs in GEON arises because, (i) GEON collaborators at the University of Hyderabad, India have deployed their own catalog, as part of the iGEON-India effort, to register information about local resources for broader access across the network, (ii) GEON collaborators in the GEO Grid (Global Earth Observations Grid) project at AIST, Japan have implemented a catalog for their ASTER data products, and (iii) we have recently deployed a search service to access all data products from the EarthScope project in the US (http://es-portal.geongrid.org), which are distributed across data archives at IRIS in Seattle, Washington, UNAVCO in Boulder, Colorado, and at the ICDP archives in GFZ, Potsdam, Germany. This service implements a "virtual" catalog--the actual/"physical" catalogs and data are stored at each of the remote locations. A federated search across all these catalogs would enable GEON users to discover data across all of these environments with a single search request. Our objective is to implement this search service via the OGC Catalog Services for the Web (CS-W) standard by providing appropriate CSW "wrappers" for each metadata catalog, as necessary. This paper will discuss technical issues in designing and deploying such a multi-catalog search service in GEON and describe an initial prototype of the federated search capability.

National news. Indonesia. Promoting ARH awareness.

PubMed

1998-06-01

Limited availability of IEC materials is hindering efforts to promote adolescent reproductive health in Indonesia. This, in turn, reflects a lack of awareness on the part of policy makers and community leaders about the importance of interventions directed at young people. Two ongoing United Nations Population Fund projects seek to promote awareness of adolescent reproductive health needs in Jakarta, Yogyakarta, West Java, Bali, Lampung, and Riau. A coalition of governmental and nongovernmental agencies has been established to implement the project. By project end in 1999, government agencies and nongovernmental organizations are expected to have incorporated youth-oriented activities into their overall programming and formulated relevant policy guidelines. Another project (Strengthening Strategies to Improve Adolescent Reproductive Health through Materials Development), implemented by the Indonesian Planned Parenthood Association, is focusing on the development and distribution of reproductive health materials for specific target audiences.

Development of a Coordinate Transformation method for direct georeferencing in map projection frames

NASA Astrophysics Data System (ADS)

Zhao, Haitao; Zhang, Bing; Wu, Changshan; Zuo, Zhengli; Chen, Zhengchao

2013-03-01

This paper develops a novel Coordinate Transformation method (CT-method), with which the orientation angles (roll, pitch, heading) of the local tangent frame of the GPS/INS system are transformed into those (omega, phi, kappa) of the map projection frame for direct georeferencing (DG). Especially, the orientation angles in the map projection frame were derived from a sequence of coordinate transformations. The effectiveness of orientation angles transformation was verified through comparing with DG results obtained from conventional methods (Legat method and POSPac method) using empirical data. Moreover, the CT-method was also validated with simulated data. One advantage of the proposed method is that the orientation angles can be acquired simultaneously while calculating position elements of exterior orientation (EO) parameters and auxiliary points coordinates by coordinate transformation. These three methods were demonstrated and compared using empirical data. Empirical results show that the CT-method is both as sound and effective as Legat method. Compared with POSPac method, the CT-method is more suitable for calculating EO parameters for DG in map projection frames. DG accuracy of the CT-method and Legat method are at the same level. DG results of all these three methods have systematic errors in height due to inconsistent length projection distortion in the vertical and horizontal components, and these errors can be significantly reduced using the EO height correction technique in Legat's approach. Similar to the results obtained with empirical data, the effectiveness of the CT-method was also proved with simulated data. POSPac method: The method is presented by Applanix POSPac software technical note (Hutton and Savina, 1997). It is implemented in the POSEO module of POSPac software.

Inservice teachers' implementation of the Science Writing Heuristic as a tool for professional growth

NASA Astrophysics Data System (ADS)

Omar, Sozan H.

According to the National Science Standards, science educators have been calling for the inclusion of inquiry-based approaches in science classrooms as a reform for science instruction. Teachers' reluctance to implement inquiry-based approaches may be attributed to the different interpretations of the underpinning theory. Any efforts to help teachers implement effective teaching approaches, therefore, should not target merely additive skills; rather, such efforts should foster fundamental changes of beliefs, knowledge, and habits of practice that teachers deeply hold. This study is a part of a bigger project known as the Science Writing Heuristic (SWH) Partnership Professional Development Project, conducted at Iowa State University in association with the Iowa Department of Education to help improve science teaching. The aim of the project is to help in service science teachers understand and apply a student-oriented instructional approach, using the SWH. The framework of the SWH emphasizes the role of classroom dialogical discussion in students' learning. The role of the teacher when implementing constructivist approaches represented in a student-oriented instruction, differs markedly from traditional approaches, and hence there is a need to study the changes in teaching practice when using this specific tool. The methodological framework of this study combined qualitative and quantitative methods. Interpretative case studies for 18 science teachers are presented. A triangulation strategy was used to provide support for the qualitative findings using three different data collection approaches: observation, questionnaire, and interviews. Quantitative data in the form of student performance on higher order conceptual questions and total test scores were collected. Teachers varied in their implementation of the SWH. Three criteria were constructed to define teachers' levels of implementation: epistemological belief, pedagogical practice, and teacher content knowledge. Different components were included within each criterion, with three scales used to rank each teacher's implementation within each criterion. The study is pointing to the importance of assisting science teachers with effective pedagogical strategies if there is to be an impact on students' performance on tests. This project was undertaken with partnerships between schools, Area Educational Agencies, and the University. Such partnerships need to be built to promote successful change to science teaching.

Implementation effect of productive 4-stage field orientation on the student technopreneur skill in vocational schools

NASA Astrophysics Data System (ADS)

Ismail, Edy; Samsudi, Widjanarko, Dwi; Joyce, Peter; Stearns, Roman

2018-03-01

This model integrates project base learning by creating a product based on environmental needs. The Produktif Orientasi Lapangan 4 Tahap (POL4T) combines technical skills and entrepreneurial elements together in the learning process. This study is to implement the result of technopreneurship learning model development which is environment-oriented by combining technology and entrepreneurship components on Machining Skill Program. This study applies research and development design by optimizing experimental subject. Data were obtained from questionnaires, learning material validation, interpersonal, intrapersonal observation forms, skills, product, teachers and students' responses, and cognitive tasks. Expert validation and t-test calculation are applied to see how effective POL4T learning model. The result of the study is in the form of 4 steps learning model to enhance interpersonal and intrapersonal attitudes, develop practical products which orient to society and appropriate technology so that the products can have high selling value. The model is effective based on the students' post test result, which is better than the pre-test. The product obtained from POL4T model is proven to be better than the productive learning. POL4T model is recommended to be implemented for XI grade students. This is can develop entrepreneurial attitudes that are environment oriented, community needs and technical competencies students.

Scope Management: A Core Information System Implementation Project Pedagogy

ERIC Educational Resources Information Center

Léger, Pierre-Majorique; Lyle, Derick; Babin, Gilbert; Charland, Patrick; Pellerin, Robert

2013-01-01

This article describes an initiative to provide IS management a capstone course that builds on the zone of proximal development concept, oriented towards developing prioritization and critical reasoning skills, and to promote self-learning. Request for proposal business cases appear to offer effective mechanisms for retaining context, while…

Bibliographic Management Software Seminars: Funding and Implementation.

ERIC Educational Resources Information Center

Henry, Marcia

This paper contains the grant proposal and final report for a project conducted by the California State University at Northridge library to demonstrate online database searching and introduce the use of bibliographic management software to faculty and graduate students. Day-long, discipline-oriented seminars were planned to increase the…

Guided-Inquiry Experiments for Physical Chemistry: The POGIL-PCL Model

ERIC Educational Resources Information Center

Hunnicutt, Sally S.; Grushow, Alexander; Whitnell, Robert

2015-01-01

The POGIL-PCL project implements the principles of process-oriented, guided-inquiry learning (POGIL) in order to improve student learning in the physical chemistry laboratory (PCL) course. The inquiry-based physical chemistry experiments being developed emphasize modeling of chemical phenomena. In each experiment, students work through at least…

A Cognitive Theory Driven New Orientation of Indonesian Lessons

ERIC Educational Resources Information Center

Nowinska, Edyta

2014-01-01

The main focus of this design research was on students' mathematical thinking and skills and on their understanding of mathematical concepts and methods. The mathematical content our project starts with is the introduction of integers. For this content new learning environments have been developed, implemented and evaluated. An important question…

ProperCAD: A portable object-oriented parallel environment for VLSI CAD

NASA Technical Reports Server (NTRS)

Ramkumar, Balkrishna; Banerjee, Prithviraj

1993-01-01

Most parallel algorithms for VLSI CAD proposed to date have one important drawback: they work efficiently only on machines that they were designed for. As a result, algorithms designed to date are dependent on the architecture for which they are developed and do not port easily to other parallel architectures. A new project under way to address this problem is described. A Portable object-oriented parallel environment for CAD algorithms (ProperCAD) is being developed. The objectives of this research are (1) to develop new parallel algorithms that run in a portable object-oriented environment (CAD algorithms using a general purpose platform for portable parallel programming called CARM is being developed and a C++ environment that is truly object-oriented and specialized for CAD applications is also being developed); and (2) to design the parallel algorithms around a good sequential algorithm with a well-defined parallel-sequential interface (permitting the parallel algorithm to benefit from future developments in sequential algorithms). One CAD application that has been implemented as part of the ProperCAD project, flat VLSI circuit extraction, is described. The algorithm, its implementation, and its performance on a range of parallel machines are discussed in detail. It currently runs on an Encore Multimax, a Sequent Symmetry, Intel iPSC/2 and i860 hypercubes, a NCUBE 2 hypercube, and a network of Sun Sparc workstations. Performance data for other applications that were developed are provided: namely test pattern generation for sequential circuits, parallel logic synthesis, and standard cell placement.

A Semester-Long Project-Oriented Biochemistry Laboratory Based on Helicobacter pylori Urease

PubMed Central

Farnham, Kate R.; Dube, Danielle H.

2015-01-01

Here we present the development of a thirteen-week project-oriented biochemistry laboratory designed to introduce students to foundational biochemical techniques and then enable students to perform original research projects once they have mastered these techniques. In particular, we describe a semester-long laboratory that focuses on a biomedically relevant enzyme – Helicobacter pylori (Hp) urease – the activity of which is absolutely required for the gastric pathogen Hp to colonize the human stomach. Over the course of the semester, students undertake a biochemical purification of Hp urease, assess the success of their purification, and investigate the activity of their purified enzyme. In the final weeks of the semester, students design and implement their own experiments to study Hp urease. This laboratory provides students with an understanding of the importance of biochemistry in human health while empowering them to engage in an active area of research. PMID:26173574

A semester-long project-oriented biochemistry laboratory based on Helicobacter pylori urease.

PubMed

Farnham, Kate R; Dube, Danielle H

2015-01-01

Here we present the development of a 13 week project-oriented biochemistry laboratory designed to introduce students to foundational biochemical techniques and then enable students to perform original research projects once they have mastered these techniques. In particular, we describe a semester-long laboratory that focuses on a biomedically relevant enzyme--Helicobacter pylori (Hp) urease--the activity of which is absolutely required for the gastric pathogen Hp to colonize the human stomach. Over the course of the semester, students undertake a biochemical purification of Hp urease, assess the success of their purification, and investigate the activity of their purified enzyme. In the final weeks of the semester, students design and implement their own experiments to study Hp urease. This laboratory provides students with an understanding of the importance of biochemistry in human health while empowering them to engage in an active area of research. © 2015 The International Union of Biochemistry and Molecular Biology.

Simplifying the construction of domain-specific automatic programming systems: The NASA automated software development workstation project

NASA Technical Reports Server (NTRS)

Allen, Bradley P.; Holtzman, Peter L.

1987-01-01

An overview is presented of the Automated Software Development Workstation Project, an effort to explore knowledge-based approaches to increasing software productivity. The project focuses on applying the concept of domain specific automatic programming systems (D-SAPSs) to application domains at NASA's Johnson Space Center. A version of a D-SAPS developed in Phase 1 of the project for the domain of space station momentum management is described. How problems encountered during its implementation led researchers to concentrate on simplifying the process of building and extending such systems is discussed. Researchers propose to do this by attacking three observed bottlenecks in the D-SAPS development process through the increased automation of the acquisition of programming knowledge and the use of an object oriented development methodology at all stages of the program design. How these ideas are being implemented in the Bauhaus, a prototype workstation for D-SAPS development is discussed.

Simplifying the construction of domain-specific automatic programming systems: The NASA automated software development workstation project

NASA Technical Reports Server (NTRS)

Allen, Bradley P.; Holtzman, Peter L.

1988-01-01

An overview is presented of the Automated Software Development Workstation Project, an effort to explore knowledge-based approaches to increasing software productivity. The project focuses on applying the concept of domain specific automatic programming systems (D-SAPSs) to application domains at NASA's Johnson Space Flight Center. A version of a D-SAPS developed in Phase 1 of the project for the domain of space station momentum management is described. How problems encountered during its implementation led researchers to concentrate on simplifying the process of building and extending such systems is discussed. Researchers propose to do this by attacking three observed bottlenecks in the D-SAPS development process through the increased automation of the acquisition of programming knowledge and the use of an object oriented development methodology at all stages of the program design. How these ideas are being implemented in the Bauhaus, a prototype workstation for D-SAPS development is discussed.

The introduction of mentorship to Project 2000 in Wales.

PubMed

Neary, M; Phillips, R; Davies, B

1996-03-13

This study focused upon the introduction of mentors in the Common Foundation Programme (CFP) of Project 2000 (UKCC 1986) in Wales. It was commissioned by the Department of Health Research and Development Division on behalf of the Welsh Office Nursing Division. The study was policy oriented and its purpose was to inform future policy decision making through an analysis of the implementation of current policies for pre-registration education. The full title of our research project, 'The practitioner teacher: a study in the introduction of mentors in the pre-registration nurse education programme', implied that a clinically-based nurse practitioner with a designated teaching remit, fulfills a particular role (that of mentor) in the pre-registration nurse education programme. It was the nature, scope and impact of this mentor role during the initial implementation period of the CFP of Project 2000 in Wales to which this study addressed itself.

Improving Paper Machine Efficiency/Productivity through On-line Control

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cyrus K Aidun

2007-08-31

This project involves implementing a new technology, microforming, in a headbox to produce an isotropic sheet with significant reductions in the MD/CD stiffness ratio (increasing CD specific STFI) and improved sheet uniformity. Microforming involves generating axial vorticity (i.e., swirl) prior to the converging nozzle of the headbox by retrofitting an existing tube block with swirl generation devices referred to as Vortigen system. The Vortigen system developed in this project is a retrofit technology to a hydraulic headbox tube block. The tubes in the tube block are re-designed to generate axial vorticity (or swirl) in the tubes. This type of flowmore » results in higher intensity small-scale turbulence in the forming jet at the slice. The net effect, as demonstrated in pilot and commercial trials, is improvement in formation and surface smoothness, lower MD/CD tensile ratio, and consequently, higher CD strength properties such as CD STFI, Ring Crush and tensile or breaking length. The objective of this project is to implement microforming by developing the retrofit technology for generation and on-line control of axial vorticity in the tubes to optimize turbulent scale and intensity, and consequently, fiber network structure properties in the sheet. This technology results in significant improvements in the performance and capital effectiveness of the paper machine (PM) for a fraction of the cost to replace a headbox. In this project we have developed and demonstrated the concept of generating axial vorticity to control the fiber orientation in the converging zone of the headbox, and to produce a sheet with isotropic fiber orientation. The technology developed here has been demonstrated in static form on several pilot trials and two series of commercial trials. The economic feasibility of this technology is based primarily on fiber savings in cases where a more isotropic fiber orientation can be used to reduce the basis weight of the product. Even a 5% decrease in basis weight will results in substantial savings covering the cost of a commercial retrofit in 6 months or less in a medium size machine. The project also resulted in significant amount of information on fiber orientation in turbulent flow and in a converging nozzle where the results can be used in other applications, such as formation of composite materials. Several MS and Ph.D. students and postdoctoral associates have been trained as part of this project.« less

The Concert system - Compiler and runtime technology for efficient concurrent object-oriented programming

NASA Technical Reports Server (NTRS)

Chien, Andrew A.; Karamcheti, Vijay; Plevyak, John; Sahrawat, Deepak

1993-01-01

Concurrent object-oriented languages, particularly fine-grained approaches, reduce the difficulty of large scale concurrent programming by providing modularity through encapsulation while exposing large degrees of concurrency. Despite these programmability advantages, such languages have historically suffered from poor efficiency. This paper describes the Concert project whose goal is to develop portable, efficient implementations of fine-grained concurrent object-oriented languages. Our approach incorporates aggressive program analysis and program transformation with careful information management at every stage from the compiler to the runtime system. The paper discusses the basic elements of the Concert approach along with a description of the potential payoffs. Initial performance results and specific plans for system development are also detailed.

Stimulus factors in motion perception and spatial orientation

NASA Technical Reports Server (NTRS)

Post, R. B.; Johnson, C. A.

1984-01-01

The Malcolm horizon utilizes a large projected light stimulus Peripheral Vision Horizon Device (PVHD) as an attitude indicator in order to achieve a more compelling sense of roll than is obtained with smaller devices. The basic principle is that the larger stimulus is more similar to visibility of a real horizon during roll, and does not require fixation and attention to the degree that smaller displays do. Successful implementation of such a device requires adjustment of the parameters of the visual stimulus so that its effects on motion perception and spatial orientation are optimized. With this purpose in mind, the effects of relevant image variables on the perception of object motion, self motion and spatial orientation are reviewed.

Observation of Reform Teaching in Undergraduate Level Mathematics and Science Courses

ERIC Educational Resources Information Center

Wainwright, Camille; Flick, Larry; Morrell, Patricia D.; Schepige, Adele

2004-01-01

This paper reports on initial results from an ongoing evaluation study of a National Science Foundation project to implement reform-oriented teaching practices in college science and mathematics courses. The purpose of this study was to determine what elements of reform teaching are being utilized by college faculty members teaching undergraduate…

"Breaking the Mold" in the Dissertation: Implementing a Problem-Based, Decision-Oriented Thesis Project

ERIC Educational Resources Information Center

Archbald, Doug

2010-01-01

This article offers lessons from an initiative refashioning the doctoral thesis in an education leadership program. The program serves a practitioner clientele; most are teachers and administrators. The new model for the thesis emphasizes leadership, problem solving, decision making, and organizational improvement. The former model was a…

A Course Redesign Project to Change Faculty Orientation toward Teaching

ERIC Educational Resources Information Center

Eliason, Susan; Holmes, Christine L.

2012-01-01

This article discusses the development, implementation, and outcomes of a Faculty Course Redesign Camp for full-time and adjunct faculty members. The purpose of the camp was to educate and coach faculty in effective strategies to promote learner-centered teaching skills. Evaluation results show that the participants changed their orientation…

Protege Growth Themes Emergent in a Holistic, Undergraduate Peer-Mentoring Experience

ERIC Educational Resources Information Center

Ward, Elijah G.; Thomas, Earl E.; Disch, William B.

2012-01-01

Two faculty members developed and implemented a successful, holistic, goal-oriented peer-mentoring project for two years at a midsize, urban university to enhance student success and retention. In year one, 12 juniors and seniors mentored 34 freshmen and sophomores; in year two, 14 upperclassmen mentored 40 underclassmen. A grounded theory…

Preserving anonymity in e-voting system using voter non-repudiation oriented scheme

NASA Astrophysics Data System (ADS)

Hamid, Isredza Rahmi A.; Radzi, Siti Nafishah Md; Rahman, Nurul Hidayah Ab; Wen, Chuah Chai; Abdullah, Nurul Azma

2017-10-01

The voting system has been developed from traditional paper ballot to electronic voting (e-voting). The e-voting system has high potential to be widely used in election event. However, the e-voting system still does not meet the most important security properties which are voter's authenticity and non-repudiation. This is because voters can simply vote again by entering other people's identification number. In this project, an electronic voting using voter non-repudiation oriented scheme will be developed. This system contains ten modules which are log in, vote session, voter, candidate, open session, voting results, user account, initial score, logs and reset vote count. In order to ensure there would be no non-repudiation issue, a voter non-repudiation oriented scheme concept will be adapted and implemented in the system. This system will be built using Microsoft Visual Studio 2013 which only can be accessed using personal computers at the voting center. This project will be beneficial for future use in order to overcome non-repudiation issue.

Inclusive design in the implementation of projects for schools modernization in Portugal - case studies.

PubMed

Lopes, Lígia; Aguiar, Carlos; da Silva, Fernando Moreira

2012-01-01

The Project for Schools Modernization taking place in Portugal, with an estimated total investment of 2450 million for the intervention in the first 205 schools, provide the reclassification of 332 secondary schools by 2015. One of the questions we can pose is if the authorities and the teams of architects selected to design these schools considered fundamental for the correctness of architectural barriers within the school and its accessibility the implementation of standards and principles of inclusion of children/teenagers with special needs within their school environment. As most of the projects are already being implemented, the main aim of this paper is to present the outcomes of a comparative analysis and synthesis of six schools located in the northern part of the country. This analysis occurs from the of Participatory Design perspective which appeals to the experience of the disable children to look (or evaluate) the negative and positive factors in terms of physical space, interpreted by inclusive design rules and orientations. Therefore, the evaluation of schools modernization project, and its discussion, is central for the understanding how these children are addressed in projects which are directed at them.

Top Down Implementation Plan for system performance test software

NASA Technical Reports Server (NTRS)

Jacobson, G. N.; Spinak, A.

1982-01-01

The top down implementation plan used for the development of system performance test software during the Mark IV-A era is described. The plan is based upon the identification of the hierarchical relationship of the individual elements of the software design, the development of a sequence of functionally oriented demonstrable steps, the allocation of subroutines to the specific step where they are first required, and objective status reporting. The results are: determination of milestones, improved managerial visibility, better project control, and a successful software development.

Design of the DISCovery project: tailored work-oriented interventions to improve employee health, well-being, and performance-related outcomes in hospital care

PubMed Central

2013-01-01

Background It is well-known that health care workers in today’s general hospitals have to deal with high levels of job demands, which could have negative effects on their health, well-being, and job performance. A way to reduce job-related stress reactions and to optimize positive work-related outcomes is to raise the level of specific job resources and opportunities to recover from work. However, the question remains how to translate the optimization of the balance between job demands, job resources, and recovery opportunities into effective workplace interventions. The aim of the DISCovery project is to develop and implement tailored work-oriented interventions to improve health, well-being, and performance of health care personnel. Methods/Design A quasi-experimental field study with a non-equivalent control group pretest-posttest design will be conducted in a top general hospital. Four existing organizational departments will provide both an intervention and a comparison group. Two types of research methods are used: (1) a longitudinal web-based survey study, and (2) a longitudinal daily diary study. After base-line measures of both methods, existing and yet to be developed interventions will be implemented within the experimental groups. Follow-up measurements will be taken one and two years after the base-line measures to analyze short-term and long-term effects of the interventions. Additionally, a process evaluation and a cost-effectiveness analysis will be carried out. Discussion The DISCovery project fulfills a strong need for theory-driven and scientifically well-performed research on job stress and performance interventions. It will provide insight into (1) how a balance between job demands, job resources, and recovery from work can be optimized, (2) the short-term and long-term effects of tailored work-oriented effects, and (3) indicators for successful or unsuccessful implementation of interventions. PMID:23421647

Design of the DISCovery project: tailored work-oriented interventions to improve employee health, well-being, and performance-related outcomes in hospital care.

PubMed

Niks, Irene M W; de Jonge, Jan; Gevers, Josette M P; Houtman, Irene L D

2013-02-19

It is well-known that health care workers in today's general hospitals have to deal with high levels of job demands, which could have negative effects on their health, well-being, and job performance. A way to reduce job-related stress reactions and to optimize positive work-related outcomes is to raise the level of specific job resources and opportunities to recover from work. However, the question remains how to translate the optimization of the balance between job demands, job resources, and recovery opportunities into effective workplace interventions. The aim of the DISCovery project is to develop and implement tailored work-oriented interventions to improve health, well-being, and performance of health care personnel. A quasi-experimental field study with a non-equivalent control group pretest-posttest design will be conducted in a top general hospital. Four existing organizational departments will provide both an intervention and a comparison group. Two types of research methods are used: (1) a longitudinal web-based survey study, and (2) a longitudinal daily diary study. After base-line measures of both methods, existing and yet to be developed interventions will be implemented within the experimental groups. Follow-up measurements will be taken one and two years after the base-line measures to analyze short-term and long-term effects of the interventions. Additionally, a process evaluation and a cost-effectiveness analysis will be carried out. The DISCovery project fulfills a strong need for theory-driven and scientifically well-performed research on job stress and performance interventions. It will provide insight into (1) how a balance between job demands, job resources, and recovery from work can be optimized, (2) the short-term and long-term effects of tailored work-oriented effects, and (3) indicators for successful or unsuccessful implementation of interventions.

"Heidelberg standard examination" and "Heidelberg standard procedures" - Development of faculty-wide standards for physical examination techniques and clinical procedures in undergraduate medical education.

PubMed

Nikendei, C; Ganschow, P; Groener, J B; Huwendiek, S; Köchel, A; Köhl-Hackert, N; Pjontek, R; Rodrian, J; Scheibe, F; Stadler, A-K; Steiner, T; Stiepak, J; Tabatabai, J; Utz, A; Kadmon, M

2016-01-01

The competent physical examination of patients and the safe and professional implementation of clinical procedures constitute essential components of medical practice in nearly all areas of medicine. The central objective of the projects "Heidelberg standard examination" and "Heidelberg standard procedures", which were initiated by students, was to establish uniform interdisciplinary standards for physical examination and clinical procedures, and to distribute them in coordination with all clinical disciplines at the Heidelberg University Hospital. The presented project report illuminates the background of the initiative and its methodological implementation. Moreover, it describes the multimedia documentation in the form of pocketbooks and a multimedia internet-based platform, as well as the integration into the curriculum. The project presentation aims to provide orientation and action guidelines to facilitate similar processes in other faculties.

Investigation of deformation at a centrifugal compressor rotor in process of interference on shaft

NASA Astrophysics Data System (ADS)

Shamim, M. R.; Berezhnoi, D. V.

2016-11-01

In this paper, according to the finite element method, we had implemented “master- slave” method of contact interaction in elastic deformable bodies, with consider of the friction in the contact zone. We had compiled the orientation of solving extremum problems with inequality restrictions, projection algorithm, which called “the closest point projection algorithm”. Finally, an example, had brought to show the calculation of the rotor nozzle centrifugal compressor on the shaft with interference.

Test implementation of a school-oriented drug prevention program "Study without Drugs": pre- and post-testing for effectiveness.

PubMed

Ishaak, Fariel; de Vries, Nanne Karel; van der Wolf, Kees

2014-06-11

In this article, the test implementation of a school-oriented drug prevention program "Study without Drugs" is discussed. The aims of this study were to determine the results of the process evaluation and to determine whether the proposed school-oriented drug prevention program during a pilot project was effective for the participating pupils. Sixty second-grade pupils at a junior high school in Paramaribo, Suriname participated in the test implementation. They were divided into two classes. For the process evaluation the students completed a structured questionnaire focusing on content and teaching method after every lesson. Lessons were qualified with a score from 0-10. The process was also evaluated by the teachers through structured interviews. Attention was paid to reach, dose delivered, dose received, fidelity, connection, achieved effects/observed behaviors, areas for improvement, and lesson strengths. The effect evaluation was conducted by using the General Liniair Model (repeated measure). The research (-design) was a pre-experimental design with pre-and post-test. No class or sex differences were detected among the pupils with regard to the assessment of content, methodology, and qualification of the lessons. Post-testing showed that participating pupils obtained an increased knowledge of drugs, their drug-resisting skills were enhanced, and behavior determinants (attitude, subjective norm, self-efficacy, and intention) became more negative towards drugs. From the results of the test implementation can be cautiously concluded that the program "Study without Drugs" may yield positive results when applied in schools). Thus, this pilot program can be considered a step towards the development and implementation of an evidence-based school-oriented program for pupils in Suriname.

Test implementation of a school-oriented drug prevention program “Study without Drugs”: pre- and post-testing for effectiveness

PubMed Central

2014-01-01

Background In this article, the test implementation of a school-oriented drug prevention program “Study without Drugs” is discussed. The aims of this study were to determine the results of the process evaluation and to determine whether the proposed school-oriented drug prevention program during a pilot project was effective for the participating pupils. Methods Sixty second-grade pupils at a junior high school in Paramaribo, Suriname participated in the test implementation. They were divided into two classes. For the process evaluation the students completed a structured questionnaire focusing on content and teaching method after every lesson. Lessons were qualified with a score from 0–10. The process was also evaluated by the teachers through structured interviews. Attention was paid to reach, dose delivered, dose received, fidelity, connection, achieved effects/observed behaviors, areas for improvement, and lesson strengths. The effect evaluation was conducted by using the General Liniair Model (repeated measure). The research (-design) was a pre-experimental design with pre-and post-test. Results No class or sex differences were detected among the pupils with regard to the assessment of content, methodology, and qualification of the lessons. Post-testing showed that participating pupils obtained an increased knowledge of drugs, their drug-resisting skills were enhanced, and behavior determinants (attitude, subjective norm, self-efficacy, and intention) became more negative towards drugs. Conclusions From the results of the test implementation can be cautiously concluded that the program “Study without Drugs” may yield positive results when applied in schools). Thus, this pilot program can be considered a step towards the development and implementation of an evidence-based school-oriented program for pupils in Suriname. PMID:24920468

The application of chemical leasing business models in Mexico.

PubMed

Schwager, Petra; Moser, Frank

2006-03-01

To better address the requirements of the changing multilateral order, the United Nations Industrial Development Organization (UNIDO) Cleaner Production Programme, in 2004, developed the new Sustainable Industrial Resource Management (SIRM) approach. This approach is in accordance with the principles decided at the United Nations Conference on Environment and Development (UNCED) in Rio de Janeiro, Brazil in 1992. Unlike the traditional approaches to environmental management, the SIRM concept captures the idea of achieving sustainable industrial development through the implementation of circular material and energy flows in the entire production chain and reduction of the amount of material and energy used with greater efficiency solutions. The SIRM approach seeks to develop new models to encourage a shift from selling products to supplying services, modifying, in this manner, the supplier/user relationship and resulting in a win-win situation for the economy and the environment. Chemical Leasing represents such a new service-oriented business model and is currently being promoted by UNIDO's Cleaner Production Programme. MAIN FEATURES. One of the potential approaches to address the problems related to ineffective use and over-consumption of chemicals is the development and implementation of Chemical Leasing business models. These provide concrete solutions to the effective management of chemicals and on the ways negative releases to the environment can be reduced. The Chemical Leasing approach is a strategy that addresses the obligations of the changing international chemicals policy by focusing on a more service-oriented strategy. Mexico is one of the countries that were selected for the implementation of UNIDO's demonstration project to promote Chemical Leasing models in the country. The target sector of this project is the chemical industry, which is expected to shift their traditional business concept towards a more service and value-added approach. This is being achieved through the development of company specific business models that implement the above-indicated Chemical Leasing concept with the support from the Mexican National Cleaner Production Centre (NCPC). The implementation of Chemical Leasing in Mexico has proven to be an efficient instrument in enhancing sustainable chemical management and significantly reducing emissions in Mexico. Several companies from the chemical industrial sector implement or agreed to implement chemical leasing business models. Based on the positive findings of the project, several Mexican companies started to negotiate contents of possible Chemical Leasing contracts with suitable business partners. The project further aimed at disseminating information on Chemical Leasing. It successfully attracted globally operating companies in the chemicals sector to explore possibilities to implement Chemical Leasing business models in Mexico. At the international level, the results of the UNIDO project were presented on 20th September 2005 during a side event of the Strategic Approach to International Chemicals Management (SAICM) Preparation Conference in Vienna. To facilitate the promotion and application of Chemical Leasing project at international level, UNIDO is currently developing a number of tools to standardize Chemical Leasing projects. These include, among others, Chemical leasing contract models; Chemical Leasing data base to find partners for chemical leasing; and guidelines to implement Chemical Leasing projects and work programmes.

Designing a Site to Embed and to Interact with Wolfram Alpha Widgets in Math and Sciences Courses

ERIC Educational Resources Information Center

Cepeda, Francisco Javier Delgado; Acosta, Ruben Dario Santiago

2014-01-01

This paper reports design and implementation outcomes at middle development advance of an educative program based on use and construction of widgets on Wolfram Alpha platform at higher education level for engineering and sciences areas. Widgets were based on Physics and Mathematics curricula under Project Oriented Learning and Blended Learning…

Teaching and Learning Critical Reading with Transnational Texts at a Mexican University: An Emergentist Case Study

ERIC Educational Resources Information Center

Perales Escudero, Moises Damian

2011-01-01

This dissertation project examines the implementation of a critical reading intervention in a Mexican university, and the emergence of target critical reading processes in Mexican college-level EFL readers. It uses a Complexity Theory-inspired, qualitative methodology. Orienting the selection and design of materials is a deep view of culture that…

The SysMan monitoring service and its management environment

NASA Astrophysics Data System (ADS)

Debski, Andrzej; Janas, Ekkehard

1996-06-01

Management of modern information systems is becoming more and more complex. There is a growing need for powerful, flexible and affordable management tools to assist system managers in maintaining such systems. It is at the same time evident that effective management should integrate network management, system management and application management in a uniform way. Object oriented OSI management architecture with its four basic modelling concepts (information, organization, communication and functional models) together with widely accepted distribution platforms such as ANSA/CORBA, constitutes a reliable and modern framework for the implementation of a management toolset. This paper focuses on the presentation of concepts and implementation results of an object oriented management toolset developed and implemented within the framework of the ESPRIT project 7026 SysMan. An overview is given of the implemented SysMan management services including the System Management Service, Monitoring Service, Network Management Service, Knowledge Service, Domain and Policy Service, and the User Interface. Special attention is paid to the Monitoring Service which incorporates the architectural key entity responsible for event management. Its architecture and building components, especially filters, are emphasized and presented in detail.

The LEONARDO-DA-VINCI pilot project "e-learning-assistant" - Situation-based learning in nursing education.

PubMed

Pfefferle, Petra Ina; Van den Stock, Etienne; Nauerth, Annette

2010-07-01

E-learning will play an important role in the training portfolio of students in higher and vocational education. Within the LEONARDO-DA-VINCI action programme transnational pilot projects were funded by the European Union, which aimed to improve the usage and quality of e-learning tools in education and professional training. The overall aim of the LEONARDO-DA-VINCI pilot project "e-learning-assistant" was to create new didactical and technical e-learning tools for Europe-wide use in nursing education. Based on a new situation-oriented learning approach, nursing teachers enrolled in the project were instructed to adapt, develop and implement e- and blended learning units. According to the training contents nursing modules were developed by teachers from partner institutions, implemented in the project centers and evaluated by students. The user-package "e-learning-assistant" as a product of the project includes two teacher training units, the authoring tool "synapse" to create situation-based e-learning units, a student's learning platform containing blended learning modules in nursing and an open sourced web-based communication centre. Copyright 2009 Elsevier Ltd. All rights reserved.

[On risk-oriented model of sanitary epidemiologic surveillance in occupational hygiene].

PubMed

Zaitseval, N V; Mai, I V; Kostarev, V G; Bashketova, N S

2015-01-01

In 2015, Federal Service on surveillance in consumers rights protection and public well-being set a task to organize planned work of regional agencies on basis of risk-oriented model of control and supervision. Based on results of pilot project in Rospotrebnadzor Department of Perm area and St-Petersburg, the article covers methodic approaches to classification of objects liable to surveillance in occupational hygiene. The classification considers possibility of sanitary law violation, severity of this violation consequences and number of workers exposed to risk factors including hazardous work conditions. The authors specified recommendations on periodicity and forms of planned inspections considering evaluation of potential risk for human health, determined problems that require solution in implementation of risk-oriented model of surveillance.

Education - employment partnership for VET in the fashion sector

NASA Astrophysics Data System (ADS)

Ursache, M.; Avădanei, M. L.; Ionesi, D. S.; Loghin, E.

2017-10-01

The paper presents the objectives, the innovative aspects, the planned outputs and the current results of the project entitled “Education - Employment Partnership for VET in the fashion sector”. The project is co-financed by the European Commission under the Erasmus+ Programme, Key Action 2 - Strategic Partnerships in the Field of Education, Training, Youth and Sport. The project aims mainly the at developing a European teaching and training Toolkit for supporting the implementation of Work-Based Learning (WBL) in all stages of vocational education and training (VET) in the fashion sector. Moreover, the project will support the implementation of quality assurance mechanisms for WBL in VET in the fashion sector with a specific focus on feedback loops between iVET and cVET systems. The project consortium is composed by nine partners from four countries (Romania, Bulgaria, Italy and Netherlands) representing two iVET providers, a university a Chamber of Commerce, a Federation of SMEs connected with fashion industries, one research institution, one company in clothing and fashion sector, two consulting companies with experience in education and training policies. The actual research results presented in the paper are based on the survey oriented to the training needs and the impact and benefits of WBL implementation. The data were collected from educational organizations. Also, examples of good practices showing the different challenges and benefits of WBL implementation, were identified.

Tiger LDRD final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Steich, D J; Brugger, S T; Kallman, J S

2000-02-01

This final report describes our efforts on the Three-Dimensional Massively Parallel CEM Technologies LDRD project (97-ERD-009). Significant need exists for more advanced time domain computational electromagnetics modeling. Bookkeeping details and modifying inflexible software constitute a vast majority of the effort required to address such needs. The required effort escalates rapidly as problem complexity increases. For example, hybrid meshes requiring hybrid numerics on massively parallel platforms (MPPs). This project attempts to alleviate the above limitations by investigating flexible abstractions for these numerical algorithms on MPPs using object-oriented methods, providing a programming environment insulating physics from bookkeeping. The three major design iterationsmore » during the project, known as TIGER-I to TIGER-III, are discussed. Each version of TIGER is briefly discussed along with lessons learned during the development and implementation. An Application Programming Interface (API) of the object-oriented interface for Tiger-III is included in three appendices. The three appendices contain the Utilities, Entity-Attribute, and Mesh libraries developed during the project. The API libraries represent a snapshot of our latest attempt at insulated the physics from the bookkeeping.« less

The navigation toolkit

NASA Technical Reports Server (NTRS)

Rich, William F.; Strom, Stephen W.

1994-01-01

This report summarizes the experience of the authors in managing, designing, and implementing an object-oriented applications framework for orbital navigation analysis for the Flight Design and Dynamics Department of the Rockwell Space Operations Company in Houston, in support of the Mission Operations Directorate of NASA's Johnson Space Center. The 8 person year project spanned 1.5 years and produced 30,000 lines of C++ code, replacing 150,000 lines of Fortran/C. We believe that our experience is important because it represents a 'second project' experience and generated real production-quality code - it was not a pilot. The project successfully demonstrated the use of 'continuous development' or rapid prototyping techniques. Use of formal methods and executable models contributed to the quality of the code. Keys to the success of the project were a strong architectural vision and highly skilled workers. This report focuses on process and methodology, and not on a detailed design description of the product. But the true importance of the object-oriented paradigm is its liberation of the developer to focus on the problem rather than the means used to solve the problem.

[Subtainable health promotion via organisational development--a model project for teachers in professional training schools].

PubMed

Schumacher, L; Nieskens, B; Bräuer, H; Sieland, B

2005-02-01

The goal of this project is the development, implementation and evaluation of a concept designed for sustainable health promotion among occupational and trade school teachers. We assume that for sustainable health promotion -- along with a behavioral prevention program -- a change is necessary in the structure, as well as, the working and communication processes within schools. The realization of early teacher participation and self regulated cooperative groups initiates comprehensive and goal-oriented developmental processes in the project schools. The organizational development process was accomplished in the following way: At the beginning we conducted a diagnosis of school-specific and individual health risks and the resources available to the project schools. The results were reported for both the individual and for the teacher group. This was intended to clarify the potential for improvement and, thus, strengthen the teachers' motivation toward processes of change. Following the diagnosis, the teachers chose areas of stress-related strain and then worked in groups to develop and implement behaviour and working condition-oriented intervention strategies for health promotion. The diagnosis results confirm the necessity of school-specific health promotion: the schools demonstrate very different demand and resource profiles. Furthermore, is has become evident that the central success factor for health promotion in schools is the teachers' willingness for change. The individual and group reports of the diagnosis results seem to have made clear how essential individual and organisational changes are.

SSBRP User Operations Facility (UOF) Overview and Development Strategy

NASA Technical Reports Server (NTRS)

Picinich, Lou; Stone, Thom; Sun, Charles; Windrem, May; Givens, John J. (Technical Monitor)

1995-01-01

This paper will present the Space Station Biological Research Project (SSBRP) User Operations Facility (UOF) architecture and development strategy. A major element of the UOF at NASA Ames Research Center, the Communication and Data System (CDS) will be the primary focus of the discussions. CDS operational, telescience, security, and development objectives will be discussed along with CDS implementation strategy. The implementation strategy discussions will include: Object Oriented Analysis & Design, System & Software Prototyping, and Technology Utilization. A CDS design overview that includes: CDS Context Diagram, CDS Architecture, Object Models, Use Cases, and User Interfaces will also be presented. CDS development brings together "cutting edge" technologies and techniques such as: object oriented development, network security, multimedia networking, web-based data distribution, JAVA, and graphical user interfaces. Use of these "cutting edge" technologies and techniques translates directly to lower development and operations costs.

Towards a virtual health record for mobile home care of elderly citizens.

PubMed

Koch, Sabine; Hägglund, Maria; Scandurra, Isabella; Moström, Dennis

2004-01-01

Mobile work situations within home care of the elderly require immediate and ubiquitous access to patient-oriented data. The ongoing Swedish research project "Technical support for Mobile CloseCare" focuses on the development and evaluation of work-scenario oriented ICT support for enhanced home care of elderly citizens. The aim of the project is to provide a seamless and consistent information flow between different health care providers and to give intuitive access to information services for the elderly and their relatives. For that purpose, different independent software components are connected through a mobile communication platform. Flexible access to prioritized information for different users in different work situations will be given through a virtual health record. In order to obtain both usable and clinically relevant results, a user centered system development approach is followed. Evaluation of the project results will be based on usability tests and quasi-experimental studies on how system implementation influences quality of care and job- and life satisfaction for care providers, patients and relatives.

The PULSAR primary care protocol: a stepped-wedge cluster randomized controlled trial to test a training intervention for general practitioners in recovery-oriented practice to optimize personal recovery in adult patients.

PubMed

Enticott, Joanne C; Shawyer, Frances; Brophy, Lisa; Russell, Grant; Fossey, Ellie; Inder, Brett; Mazza, Danielle; Vasi, Shiva; Weller, Penelope June; Wilson-Evered, Elisabeth; Edan, Vrinda; Meadows, Graham

2016-12-20

General practitioners (GPs) in Australia play a central role in the delivery of mental health care. This article describes the PULSAR (Principles Unite Local Services Assisting Recovery) Primary Care protocol, a novel mixed methods evaluation of a training intervention for GPs in recovery-oriented practice. The aim of the intervention is to optimize personal recovery in patients consulting study GPs for mental health issues. The intervention mixed methods design involves a stepped-wedge cluster randomized controlled trial testing the outcomes of training in recovery-oriented practice, together with an embedded qualitative study to identify the contextual enablers and challenges to implementing recovery-oriented practice. The project is conducted in Victoria, Australia between 2013 and 2017. Eighteen general practices and community health centers are randomly allocated to one of two steps (nine months apart) to start an intervention comprising GP training in the delivery of recovery-oriented practice. Data collection consists of cross-sectional surveys collected from patients of participating GPs at baseline, and again at the end of Steps 1 and 2. The primary outcome is improvement in personal recovery using responses to the Questionnaire about the Process of Recovery. Secondary outcomes are improvements in patient-rated measures of personal recovery and wellbeing, and of the recovery-oriented practice they have received, using the INSPIRE questionnaire, the Warwick-Edinburgh Mental Well-being Scale, and the Kessler Psychological Distress Scale. Participant data will be analyzed in the group that the cluster was assigned to at each study time point. Another per-protocol dataset will contain all data time-stamped according to the date of intervention received at each cluster site. Qualitative interviews with GPs and patients at three and nine months post-training will investigate experiences and challenges related to implementing recovery-oriented practice in primary care. Recovery-oriented practice is gaining increasing prominence in mental health service delivery and the outcomes of such an approach within the primary care sector for the first time will be evaluated in this project. If findings are positive, the intervention has the potential to extend recovery-oriented practice to GPs throughout the community. Australian and New Zealand Clinical Trial Registry ( ACTRN12614001312639 ). Registered: 8 August 2014.

Project Integration Architecture: Architectural Overview

NASA Technical Reports Server (NTRS)

Jones, William Henry

2001-01-01

The Project Integration Architecture (PIA) implements a flexible, object-oriented, wrapping architecture which encapsulates all of the information associated with engineering applications. The architecture allows the progress of a project to be tracked and documented in its entirety. By being a single, self-revealing architecture, the ability to develop single tools, for example a single graphical user interface, to span all applications is enabled. Additionally, by bringing all of the information sources and sinks of a project into a single architectural space, the ability to transport information between those applications becomes possible, Object-encapsulation further allows information to become in a sense self-aware, knowing things such as its own dimensionality and providing functionality appropriate to its kind.

“Heidelberg standard examination” and “Heidelberg standard procedures” – Development of faculty-wide standards for physical examination techniques and clinical procedures in undergraduate medical education

PubMed Central

Nikendei, C.; Ganschow, P.; Groener, J. B.; Huwendiek, S.; Köchel, A.; Köhl-Hackert, N.; Pjontek, R.; Rodrian, J.; Scheibe, F.; Stadler, A.-K.; Steiner, T.; Stiepak, J.; Tabatabai, J.; Utz, A.; Kadmon, M.

2016-01-01

The competent physical examination of patients and the safe and professional implementation of clinical procedures constitute essential components of medical practice in nearly all areas of medicine. The central objective of the projects “Heidelberg standard examination” and “Heidelberg standard procedures”, which were initiated by students, was to establish uniform interdisciplinary standards for physical examination and clinical procedures, and to distribute them in coordination with all clinical disciplines at the Heidelberg University Hospital. The presented project report illuminates the background of the initiative and its methodological implementation. Moreover, it describes the multimedia documentation in the form of pocketbooks and a multimedia internet-based platform, as well as the integration into the curriculum. The project presentation aims to provide orientation and action guidelines to facilitate similar processes in other faculties. PMID:27579354

TimeBench: a data model and software library for visual analytics of time-oriented data.

PubMed

Rind, Alexander; Lammarsch, Tim; Aigner, Wolfgang; Alsallakh, Bilal; Miksch, Silvia

2013-12-01

Time-oriented data play an essential role in many Visual Analytics scenarios such as extracting medical insights from collections of electronic health records or identifying emerging problems and vulnerabilities in network traffic. However, many software libraries for Visual Analytics treat time as a flat numerical data type and insufficiently tackle the complexity of the time domain such as calendar granularities and intervals. Therefore, developers of advanced Visual Analytics designs need to implement temporal foundations in their application code over and over again. We present TimeBench, a software library that provides foundational data structures and algorithms for time-oriented data in Visual Analytics. Its expressiveness and developer accessibility have been evaluated through application examples demonstrating a variety of challenges with time-oriented data and long-term developer studies conducted in the scope of research and student projects.

Using Problem-Based Learning to Deliver a More Authentic Experience in Paleontology

ERIC Educational Resources Information Center

Montgomery, Homer; Donaldson, Katherine

2014-01-01

This study is a research project focused on the implementation of problem-based learning in an honors, paleontology-oriented, Earth Science course. The course, the Age of Dinosaurs, is taught at the University of Texas at Dallas to undergraduates from a range of majors who seek core-curriculum science credit. All class work is centered on fossils…

A Job Aid Solution to the Need for Low Cost, Results Oriented Dental Laboratory Manufacturing Industry Training.

ERIC Educational Resources Information Center

Selg, Timothy E.

A thesis project was conducted to design, develop, implement, and evaluate a job aid used by shipping department employees in a dental laboratory. The job aid was developed in preference to training to solve the organization's performance problem. Task analysis was performed to identify the shipping clerks' duties. These tasks were stated in the…

Total-System Design: Planning, Delivering, and Sharing Instruction Oriented to Professional Practice and Human Values.

ERIC Educational Resources Information Center

Lux, M. Janet

Aspects of the Total-System Design (TSD) approach to instructional design in medical laboratory science that was implemented at Creighton University are described. In a four-year project, TSD principles were used to produce the uniform, systematic, and complete definition of a medical technology major within a program of study leading to the…

Fifth Graders' Learning about Simple Machines through Engineering Design-Based Instruction Using LEGO™ Materials

ERIC Educational Resources Information Center

Marulcu, Ismail; Barnett, Mike

2013-01-01

This study is part of a 5-year National Science Foundation-funded project, Transforming Elementary Science Learning Through LEGO™ Engineering Design. In this study, we report on the successes and challenges of implementing an engineering design-based and LEGO™-oriented unit in an urban classroom setting and we focus on the impact of the unit on…

Implementation of New Process Models for Tailored Polymer Composite Structures into Processing Software Packages

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nguyen, Ba Nghiep; Jin, Xiaoshi; Wang, Jin

2010-02-23

This report describes the work conducted under the Cooperative Research and Development Agreement (CRADA) (Nr. 260) between the Pacific Northwest National Laboratory (PNNL) and Autodesk, Inc. to develop and implement process models for injection-molded long-fiber thermoplastics (LFTs) in processing software packages. The structure of this report is organized as follows. After the Introduction Section (Section 1), Section 2 summarizes the current fiber orientation models developed for injection-molded short-fiber thermoplastics (SFTs). Section 3 provides an assessment of these models to determine their capabilities and limitations, and the developments needed for injection-molded LFTs. Section 4 then focuses on the development of amore » new fiber orientation model for LFTs. This model is termed the anisotropic rotary diffusion - reduced strain closure (ARD-RSC) model as it explores the concept of anisotropic rotary diffusion to capture the fiber-fiber interaction in long-fiber suspensions and uses the reduced strain closure method of Wang et al. to slow down the orientation kinetics in concentrated suspensions. In contrast to fiber orientation modeling, before this project, no standard model was developed to predict the fiber length distribution in molded fiber composites. Section 5 is therefore devoted to the development of a fiber length attrition model in the mold. Sections 6 and 7 address the implementations of the models in AMI, and the conclusions drawn from this work is presented in Section 8.« less

Project Integration Architecture as a Foundation for Autonomous Solution Systems: The Postulation of a Meaningful "SolveYourself" Method

NASA Technical Reports Server (NTRS)

Jones, William Henry

2005-01-01

The Project Integration Architecture (PIA) uses object-oriented technology to implement self-revelation and semantic infusion through class derivation. That is, the kind of an object can be discovered through program inquiry and the well-known, well-defined meaning of that object can be utilized as a result of that discovery. This technology has already been demonstrated by the PIA effort in its parameter object classes. It is proposed that, by building on this technology, an autonomous, automatic, goal-seeking, solution system may be devised.

Direct Retrieval of Exterior Orientation Parameters Using A 2-D Projective Transformation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Seedahmed, Gamal H.

2006-09-01

Direct solutions are very attractive because they obviate the need for initial approximations associated with non-linear solutions. The Direct Linear Transformation (DLT) establishes itself as a method of choice for direct solutions in photogrammetry and other fields. The use of the DLT with coplanar object space points leads to a rank deficient model. This rank deficient model leaves the DLT defined up to a 2-D projective transformation, which makes the direct retrieval of the exterior orientation parameters (EOPs) a non-trivial task. This paper presents a novel direct algorithm to retrieve the EOPs from the 2-D projective transformation. It is basedmore » on a direct relationship between the 2-D projective transformation and the collinearity model using homogeneous coordinates representation. This representation offers a direct matrix correspondence between the 2-D projective transformation parameters and the collinearity model parameters. This correspondence lends itself to a direct matrix factorization to retrieve the EOPs. An important step in the proposed algorithm is a normalization process that provides the actual link between the 2-D projective transformation and the collinearity model. This paper explains the theoretical basis of the proposed algorithm as well as the necessary steps for its practical implementation. In addition, numerical examples are provided to demonstrate its validity.« less

[Vocational orientation in medical rehabilitation: development of a practice handbook and a homepage as user-oriented media for rehabilitative practice].

PubMed

Lukasczik, M; Löffler, S; Gerlich, C; Wolf, H-D; Neuderth, S

2011-06-01

Vocational orientation in medical rehabilitation has become an important issue in rehabilitation science and practice in Germany. Although a variety of vocationally oriented interventions has been developed in recent years, there is still a lack of consensus with regard to the definition of specific types of interventions as well as relevant criteria (e. g., methods; instruments; duration/frequency; patient groups). Building on preliminary definitions, basic types of vocationally oriented measures/interventions were conceptually modified and refined in the context of a consensual process. 39 experts of various professions were contacted during a 2-stage Delphi survey to evaluate existing definitions of vocationally oriented interventions using key questions. Standardized descriptions of 5 vocationally oriented basic interventions were specified in cooperation with an interdisciplinary panel of experts. Descriptions were published in a workbook and a homepage for researchers and clinicians, which also contain information on the implementation of measures into rehabilitative care as well as good practice examples. The media developed in this project may contribute to the transfer of research results on vocationally oriented rehabilitation into health care practice. © Georg Thieme Verlag KG Stuttgart · New York.

Project Communication in Functions, Process and Project-Oriented Industiral Companies

NASA Astrophysics Data System (ADS)

Samáková, Jana; Koltnerová, Kristína; Rybanský, Rudolf

2012-12-01

The article is focused on the project communication management. Industrial enterprises, which use project management must constantly search the new ways for improving. One of the possibilities is the change of management from a functional oriented to the projectoriented or process-oriented. Process-oriented and project-oriented companies have better project communication management during the all project life cycle. Communication in the project is a very important factor. According to the arguments of several authors, one of the biggest problem is that threaten the success of the project is just the communication. In each project is an important pillar - and that is communication. Only on the base of communication can the project move forward and achieve the target.

Managing a big ground-based astronomy project: the Thirty Meter Telescope (TMT) project

NASA Astrophysics Data System (ADS)

Sanders, Gary H.

2008-07-01

TMT is a big science project and its scale is greater than previous ground-based optical/infrared telescope projects. This paper will describe the ideal "linear" project and how the TMT project departs from that ideal. The paper will describe the needed adaptations to successfully manage real world complexities. The progression from science requirements to a reference design, the development of a product-oriented Work Breakdown Structure (WBS) and an organization that parallels the WBS, the implementation of system engineering, requirements definition and the progression through Conceptual Design to Preliminary Design will be summarized. The development of a detailed cost estimate structured by the WBS, and the methodology of risk analysis to estimate contingency fund requirements will be summarized. Designing the project schedule defines the construction plan and, together with the cost model, provides the basis for executing the project guided by an earned value performance measurement system.

From "Bored Witless" to "Rhetorical Nous": Teacher Orientation to Knowledge about Language and Strengthening Student Persuasive Writing

ERIC Educational Resources Information Center

Love, Kristina; Sandiford, Carmel; Macken-Horarik, Mary; Unsworth, Len

2014-01-01

We report in this paper on one aspect of a project designed to support teachers with the demands of the Language strand of the Australian Curriculum for English as this guides their development of a coherent account of knowledge about language and their implementation of this in building their students' literacy repertoires. We map the changing…

The Fluke Security Project

DTIC Science & Technology

2000-04-01

be an extension of Utah’s nascent Quarks system, oriented to closely coupled cluster environments. However, the grant did not actually begin until... Intel x86, implemented ten virtual machine monitors and servers, including a virtual memory manager, a checkpointer, a process manager, a file server...Fluke, we developed a novel hierarchical processor scheduling frame- work called CPU inheritance scheduling [5]. This is a framework for scheduling

OTF CCSDS Mission Operations Prototype. Directory and Action Service. Phase I: Exit Presentation

NASA Technical Reports Server (NTRS)

Reynolds, Walter F.; Lucord, Steven A.; Stevens, John E.

2009-01-01

This slide presentation describes the phase I directory and action service prototype for the CCSDS system. The project goals are to: (1) Demonstrate the use of Mission Operations standards to implement Directory and Action Services (2) Investigate Mission Operations language neutrality (3) Investigate C3I XML interoperability concepts (4) Integrate applicable open source technologies in a Service Oriented Architecture

Towards transdisciplinarity in Arctic sustainability knowledge co-production: Socially-Oriented Observations as a participatory integrated activity

NASA Astrophysics Data System (ADS)

Vlasova, Tatiana; Volkov, Sergey

2016-09-01

The paper is an attempt to tie together main biogeophysical and social science projects under the auspice of interdisciplinary sustainability science development. Special attention is put to the necessity of the transdisciplinary knowledge co-production based on activities and problem-solutions approaches. It puts attention to the role of monitoring activities in sustainability interdisciplinary science and transdisciplinary knowledge evolution in the Arctic. Socially focused monitoring named Socially-Oriented Observations creating a transdisciplinary space is viewed as one of sources of learning and transformations towards sustainability making possible to shape rapid changes happening in the Arctic based on sustainability knowledge co-production. Continuous Socially-Oriented Observations integrating scientific, education and monitoring methods enables to define adaptation and transformation pathways in the Arctic - the most rapidly changing region of our planet. Socially-Oriented Observations are based on the existing and developing interdisciplinary scientific approaches emerged within natural science and social science projects, sustainable development and resilience concepts putting principle attention to building sustainable and resilient socio-ecological systems. It is argued that the Arctic sustainability science is a valuable component of the whole and broader system of the Arctic Sustainability knowledge co-produced with the help of transdisciplinary approaches integrating science, local/traditional knowledge, entrepreneurship, education, decision-making. Socially-Oriented Observations are designed to be a transdisciplinary interactive continuous participatory process empowering deliberate choices of people that can shape the changes and enable transformation towards sustainability. Approaches of Socially-Oriented Observations and methods of implementation that have been developed since the IPY 2007/2008 and being practiced in different regions of the Arctic are discussed.

A Report On Eight Early-Stage State And Regional Projects Testing Value-Based Payment

PubMed Central

Conrad, Douglas; Grembowski, David; Gibbons, Claire; Marcus-Smith, Miriam; Hernandez, Susan E.; Chang, Judy; Renz, Anne; Lau, Bernard; Cruz, Erin dela

2014-01-01

To help contain health care spending and improve the quality of care, practitioners and policy makers are trying to move away from fee-for-service toward value-based payment, which links providers’ reimbursement to the value, rather than the volume, of services delivered. With funding from the Robert Wood Johnson Foundation, eight grantees across the country are designing and implementing value-based payment reform projects. For example, in Salem, Oregon, the Physicians Choice Foundation is testing “Program Oriented Payments,” which include incentives for providers who follow a condition-specific program of care designed to meet goals set jointly by patient and provider. In this article we describe the funding rationale and the specific objectives, strategies, progress, and early stages of implementation of the eight projects. We also share some early lessons and identify prerequisites for success, such as ensuring that providers have broad and timely access to data so they can meet patients’ needs in cost-effective ways. PMID:23650332

Implementation of a Distributed Object-Oriented Database Management System

DTIC Science & Technology

1989-03-01

and heuristic algorithms. A method for determining ueit allocation by splitting relations in the conceptual schema base on queries and updates is...level framworks can provide to the user the appearance of many tools to be closely integrated. In particular, the KBSA tools use many high level...development process should begin first with conceptual design of the system. Approximately one month should be used to decide how the new projects

Developing Participatory Approaches for Use in an Action Research Project with Teachers Who Support Children with Visual Impairment in Kenya and Uganda: Reflections on the Relational Praxis between Participants and Research Institutions

ERIC Educational Resources Information Center

Lynch, Paul; McLinden, Mike; Douglas, Graeme; McCall, Steve; Muturi, Mary; Bayo, Asher; Mwaura, Martha; Muga, John

2012-01-01

Participatory research is a broad term covering a range of approaches that are characterised by a focus on "action-oriented" research involving researchers and participants working in collaboration to bring about positive change. These approaches emphasise engagement with co-researchers and the development and implementation of…

The Value of Electronic Medical Record Implementation in Mental Health Care: A Case Study

PubMed Central

Fischler, Ilan; Stuckey, Melanie I; Klassen, Philip E; Chen, John

2017-01-01

Background Electronic medical records (EMR) have been implemented in many organizations to improve the quality of care. Evidence supporting the value added to a recovery-oriented mental health facility is lacking. Objective The goal of this project was to implement and customize a fully integrated EMR system in a specialized, recovery-oriented mental health care facility. This evaluation examined the outcomes of quality improvement initiatives driven by the EMR to determine the value that the EMR brought to the organization. Methods The setting was a tertiary-level mental health facility in Ontario, Canada. Clinical informatics and decision support worked closely with point-of-care staff to develop workflows and documentation tools in the EMR. The primary initiatives were implementation of modules for closed loop medication administration, collaborative plan of care, clinical practice guidelines for schizophrenia, restraint minimization, the infection prevention and control surveillance status board, drug of abuse screening, and business intelligence. Results Medication and patient scan rates have been greater than 95% since April 2014, mitigating the adverse effects of medication errors. Specifically, between April 2014 and March 2015, only 1 moderately severe and 0 severe adverse drug events occurred. The number of restraint incidents decreased 19.7%, which resulted in cost savings of more than Can $1.4 million (US $1.0 million) over 2 years. Implementation of clinical practice guidelines for schizophrenia increased adherence to evidence-based practices, standardizing care across the facility. Improved infection prevention and control surveillance reduced the number of outbreak days from 47 in the year preceding implementation of the status board to 7 days in the year following. Decision support to encourage preferential use of the cost-effective drug of abuse screen when clinically indicated resulted in organizational cost savings. Conclusions EMR implementation allowed Ontario Shores Centre for Mental Health Sciences to use data analytics to identify and select appropriate quality improvement initiatives, supporting patient-centered, recovery-oriented practices and providing value at the clinical, organizational, and societal levels. PMID:28057607

SCOS 2: An object oriented software development approach

NASA Technical Reports Server (NTRS)

Symonds, Martin; Lynenskjold, Steen; Mueller, Christian

1994-01-01

The Spacecraft Control and Operations System 2 (SCOS 2), is intended to provide the generic mission control system infrastructure for future ESA missions. It represents a bold step forward in order to take advantage of state-of-the-art technology and current practices in the area of software engineering. Key features include: (1) use of object oriented analysis and design techniques; (2) use of UNIX, C++ and a distributed architecture as the enabling implementation technology; (3) goal of re-use for development, maintenance and mission specific software implementation; and (4) introduction of the concept of a spacecraft control model. This paper touches upon some of the traditional beliefs surrounding Object Oriented development and describes their relevance to SCOS 2. It gives rationale for why particular approaches were adopted and others not, and describes the impact of these decisions. The development approach followed is discussed, highlighting the evolutionary nature of the overall process and the iterative nature of the various tasks carried out. The emphasis of this paper is on the process of the development with the following being covered: (1) the three phases of the SCOS 2 project - prototyping & analysis, design & implementation and configuration / delivery of mission specific systems; (2) the close cooperation and continual interaction with the users during the development; (3) the management approach - the split between client staff, industry and some of the required project management activities; (4) the lifecycle adopted being an enhancement of the ESA PSS-05 standard with SCOS 2 specific activities and approaches defined; and (5) an examination of some of the difficulties encountered and the solutions adopted. Finally, the lessons learned from the SCOS 2 experience are highlighted, identifying those issues to be used as feedback into future developments of this nature. This paper does not intend to describe the finished product and its operation, but focusing on the journey to arrive there, concentrating therefore on the process and not the products of the SCOS 2 software development.

Utilizing Quality Improvement Methods to Improve Patient Care Outcomes in a Pediatric Residency Program

PubMed Central

Akins, Ralitsa B.; Handal, Gilbert A.

2009-01-01

Objective Although there is an expectation for outcomes-oriented training in residency programs, the reality is that few guidelines and examples exist as to how to provide this type of education and training. We aimed to improve patient care outcomes in our pediatric residency program by using quality improvement (QI) methods, tools, and approaches. Methods A series of QI projects were implemented over a 3-year period in a pediatric residency program to improve patient care outcomes and teach the residents how to use QI methods, tools, and approaches. Residents experienced practice-based learning and systems-based assessment through group projects and review of their own patient outcomes. Resident QI experiences were reviewed quarterly by the program director and were a mandatory part of resident training portfolios. Results Using QI methodology, we were able to improve management of children with obesity, to achieve high compliance with the national patient safety goals, improve the pediatric hotline service, and implement better patient flow in resident continuity clinic. Conclusion Based on our experiences, we conclude that to successfully implement QI projects in residency programs, QI techniques must be formally taught, the opportunities for resident participation must be multiple and diverse, and QI outcomes should be incorporated in resident training and assessment so that they experience the benefits of the QI intervention. The lessons learned from our experiences, as well as the projects we describe, can be easily deployed and implemented in other residency programs. PMID:21975995

Electronic health records: critical success factors in implementation.

PubMed

Safdari, Reza; Ghazisaeidi, Marjan; Jebraeily, Mohamad

2015-04-01

EHR implementation results in the improved quality of care, customer-orientation and timely access to complete information. Despite the potential benefits of EHR, its implementation is a difficult and complex task whose success depends on many factors. The purpose of this research is indeed to identify the key success factors of EHR. This is a cross-sectional survey conducted with participation of 340 work forces from different types of job from Hospitals of TUMS in 2014. Data were collected using a self-structured questionnaire which was estimated as both reliable and valid. The data were analyzed by SPSS software descriptive statistics and analytical statistics. 58.2% of respondents were female and their mean age and work experience were 37.7 and 11.2 years, respectively and most respondents (52.5%) was bachelor. In terms of job, the maximum rate was related to nursing (33 %) and physician (21 %). the main category of critical success factors in Implementation EHRs, the highest rate related to Project Management (4.62) and lowest related to Organizational factors (3.98). success in implementation EHRs requirement more centralization to project management and human factors. Therefore must be Creating to EHR roadmap implementation, establishment teamwork to participation of end-users and select prepare leadership, users obtains sufficient training to use of system and also prepare support from maintain and promotion system.

Professional development for primary science teaching in Thailand: Knowledge, orientations, and practices of professional developers and professional development participants

NASA Astrophysics Data System (ADS)

Musikul, Kusalin

The purpose of this study was to examine an entire PD project as a case to understand the dynamic nature of science PD in a holistic manner. I used a pedagogical content knowledge model by Magnusson, Krajcik, and Borko (1999) as my theoretical framework in examining the professional developers' and teacher participants' knowledge, orientation, and practice for professional development and elementary science teaching. The case study is my research tradition; I used grounded theory for data analysis. The primary data sources were interview, card sort activity, and observation field notes collected during the PD and subsequently in teacher participants' classrooms. Secondary data sources were documents and artifacts that I collected from the professional developers and teachers. An analysis of the data led me to interpret the following findings: (a) the professional developers displayed multiple orientations. These orientations included activity-driven, didactic, discovery, and pedagogy-driven orientations. The orientations that were found among the professional developers deviated from the reformed Thai Science Education Standards; (b) the professional developers had limited PCK for PD, which were knowledge of teachers' learning, knowledge of PD strategies, knowledge of PD curriculum, and knowledge of assessment.; (c) the professional developers' knowledge and orientations influenced their decisions in selecting PD activities and teaching approaches; (d) their orientations and PCK as well as the time factor influenced the design and implementation of the professional development; (e) the elementary teachers displayed didactic, activity-driven, and academic rigor orientations. The orientations that the teachers displayed deviated from the reformed Thai Science Education Standards; and (f) the elementary teachers exhibited limited PCK. It is evident that the limitation of one type of knowledge resulted in an ineffective use of other components of PCK. This study demonstrates the nature of PD in the context of Thailand in a holistic view to understand knowledge, orientation, and implementation of professional developers and professional development participants. Furthermore, the findings have implications for professional development and professional developers in Thailand and include worldwide with respect to promoting sustain and intensive professional development and developing professional developers.

Improving Orientation Outcomes: Implementation of Phased Orientation Process in an Intermediate Special Care Nursery.

PubMed

Rivera, Emily K; Shedenhelm, Heidi J; Gibbs, Ardyce L

2015-01-01

In response to changing needs of registered nurse orientees, the staff education committee in the Intermediate Special Care Nursery has implemented a phased orientation process. This phased process includes a mentoring experience postorientation to support a new nurse through the first year of employment. Since implementing the phased orientation process in the Intermediate Special Care Nursery, orientee satisfaction and preparation to practice have increased, and length of orientation has decreased.

Framework for Development of Object-Oriented Software

NASA Technical Reports Server (NTRS)

Perez-Poveda, Gus; Ciavarella, Tony; Nieten, Dan

2004-01-01

The Real-Time Control (RTC) Application Framework is a high-level software framework written in C++ that supports the rapid design and implementation of object-oriented application programs. This framework provides built-in functionality that solves common software development problems within distributed client-server, multi-threaded, and embedded programming environments. When using the RTC Framework to develop software for a specific domain, designers and implementers can focus entirely on the details of the domain-specific software rather than on creating custom solutions, utilities, and frameworks for the complexities of the programming environment. The RTC Framework was originally developed as part of a Space Shuttle Launch Processing System (LPS) replacement project called Checkout and Launch Control System (CLCS). As a result of the framework s development, CLCS software development time was reduced by 66 percent. The framework is generic enough for developing applications outside of the launch-processing system domain. Other applicable high-level domains include command and control systems and simulation/ training systems.

Vocational Training and Innovative Practices in the Environmental Sector: A Comparison of Ten EU [European Union] Member States with Specimen Cases. Synthesis Report in the Context of the "Observing Innovations in Vocational Training" Project. CEDEFOP Panorama.

ERIC Educational Resources Information Center

Loos, Roland

This report provides specialist information and application-oriented recommendations to implement innovative environmental vocational education and training (VET) measures and practices. Chapter 1 explains study method and structure. Chapter 2 provides an overview of the current state of environmental VET in Austria, Denmark, Finland, Germany,…

C3I and Modelling and Simulation (M&S) Interoperability

DTIC Science & Technology

2004-03-01

customised Open Source products. The technical implementation is based on the use of the eXtendend Markup Language (XML) and Python . XML is developed...to structure, store and send information. The language is focus on the description of data. Python is a portable, interpreted, object-oriented...programming language. A huge variety of usable Open Source Projects were issued by the Python Community. 3.1 Phase 1: Feasibility Studies Phase 1 was

Nationwide telecare for diabetics: a pilot implementation of the HOLON architecture.

PubMed Central

Jones, P. C.; Silverman, B. G.; Athanasoulis, M.; Drucker, D.; Goldberg, H.; Marsh, J.; Nguyen, C.; Ravichandar, D.; Reis, L.; Rind, D.; Safran, C.

1998-01-01

This paper presents results from a demonstration project of nationwide exchange of health data for the home care of diabetic patients. A consortium of industry, academic, and health care partners has developed reusable middleware components integrated using the HOLON architecture. Engineering approaches for multi-organization systems development, lessons learned in developing layered object-oriented systems, security and confidentiality considerations, and functionality for nationwide telemedicine applications are discussed. PMID:9929239

NASA Risk Management Handbook. Version 1.0

NASA Technical Reports Server (NTRS)

Dezfuli, Homayoon; Benjamin, Allan; Everett, Christopher; Maggio, Gaspare; Stamatelatos, Michael; Youngblood, Robert; Guarro, Sergio; Rutledge, Peter; Sherrard, James; Smith, Curtis;

Turning the Co-Production Corner: Methodological Reflections from an Action Research Project to Promote LGBT Inclusion in Care Homes for Older People.

PubMed

Willis, Paul; Almack, Kathryn; Hafford-Letchfield, Trish; Simpson, Paul; Billings, Barbara; Mall, Naresh

2018-04-07

Background : Older lesbian, gay, bisexual and trans (LGBT) residents are often invisible in long-term care settings. This article presents findings from a community-based action research project, which attempted to address this invisibility through co-produced research with LGBT community members. Particular Question: What conditions enable co-produced research to emerge in long-term residential care settings for older people? Aims of Project: To analyse outcomes and challenges of action-oriented, co-produced research in the given context. In particular, we explore how co-production as a collaborative approach to action-orientated research can emerge during the research/fieldwork process; and reflect critically on the ethics and effectiveness of this approach in advancing inclusion in context. The project was implemented across six residential care homes in England. Reflections are based on qualitative evaluation data gathered pre- and post-project, which includes 37 interviews with care home staff, managers and community advisors (two of whom are co-authors) . Results and Conclusions: We discuss how the co-production turn emerged during research and evaluate how the politics of this approach helped advance inclusion-itself crucial to well-being. We argue for the value of co-produced research in instigating organizational change in older people's care environments and of non-didactic storytelling in LGBT awareness-raising amongst staff.

Turning the Co-Production Corner: Methodological Reflections from an Action Research Project to Promote LGBT Inclusion in Care Homes for Older People

PubMed Central

Almack, Kathryn; Simpson, Paul; Billings, Barbara; Mall, Naresh

2018-01-01

Background: Older lesbian, gay, bisexual and trans (LGBT) residents are often invisible in long-term care settings. This article presents findings from a community-based action research project, which attempted to address this invisibility through co-produced research with LGBT community members. Particular Question: What conditions enable co-produced research to emerge in long-term residential care settings for older people? Aims of Project: To analyse outcomes and challenges of action-oriented, co-produced research in the given context. In particular, we explore how co-production as a collaborative approach to action-orientated research can emerge during the research/fieldwork process; and reflect critically on the ethics and effectiveness of this approach in advancing inclusion in context. Methods: The project was implemented across six residential care homes in England. Reflections are based on qualitative evaluation data gathered pre- and post-project, which includes 37 interviews with care home staff, managers and community advisors (two of whom are co-authors). Results and Conclusions: We discuss how the co-production turn emerged during research and evaluate how the politics of this approach helped advance inclusion—itself crucial to well-being. We argue for the value of co-produced research in instigating organizational change in older people’s care environments and of non-didactic storytelling in LGBT awareness-raising amongst staff. PMID:29642460

Team research at the biology-mathematics interface: project management perspectives.

PubMed

Milton, John G; Radunskaya, Ami E; Lee, Arthur H; de Pillis, Lisette G; Bartlett, Diana F

2010-01-01

The success of interdisciplinary research teams depends largely upon skills related to team performance. We evaluated student and team performance for undergraduate biology and mathematics students who participated in summer research projects conducted in off-campus laboratories. The student teams were composed of a student with a mathematics background and an experimentally oriented biology student. The team mentors typically ranked the students' performance very good to excellent over a range of attributes that included creativity and ability to conduct independent research. However, the research teams experienced problems meeting prespecified deadlines due to poor time and project management skills. Because time and project management skills can be readily taught and moreover typically reflect good research practices, simple modifications should be made to undergraduate curricula so that the promise of initiatives, such as MATH-BIO 2010, can be implemented.

Development of sanitation technologies in African context : how could we make it more sustainable?

NASA Astrophysics Data System (ADS)

Dakouré, M. S.; Traoré, M. B.; Sossou, S. K.; Maïga, A. H.

2017-03-01

Access to sanitation technologies remains one of the biggest challenges in sub-Saharan Africa. To overcome this gap, a sanitation project called “Ameli-EAUR” translated from French as improvement of water and sanitation in urban and rural areas, was implemented in Burkina Faso for 5 years (2010-2016). The technologies from the project were designed on the basis of agro-sanitation concept, leading to package containing a composting toilet, a grey water treatment facility and a set of urine collection and treatment. The study aimed to evaluate of Ameli-EAUR project, one year after the end, and identify some key factors of sustainability of technologies. As methodology, a survey and a technical diagnostic of implemented technologies were done. The results showed that, the pilot families stopped using all the technologies one year after the end of the project. However, two main lessons can be learnt: (1) in term of efficiency and effectiveness of the project the technology of composting toilet was not robust enough, leading to a rapid abandonment after the project (2) in term of impact and sustainability, the economic incentive of the resource oriented sanitation concept was very weak compared to the needed workload. The technologies development in this kind of project should be carried on and associated with a more inclusive system driven by economic incentive.

When planning is not enough: the self-regulatory effect of implementation intentions on changing snacking habits.

PubMed

Tam, Leona; Bagozzi, Richard P; Spanjol, Jelena

2010-05-01

This study examined whether matching implementation intentions to people's regulatory orientation affects the effectiveness of changing unhealthy snacking habits. Participants' regulatory orientation was either measured (as a chronic trait) or manipulated (as a situational state), and participants were randomly assigned to implementation intention conditions to eat more healthy snacks or avoid eating unhealthy ones. A self-reported online food diary of healthy and unhealthy snacks over a 2-day period. Participants with weak unhealthy snacking habits consumed more healthy snacks when forming any type of implementation intentions (regardless of match or mismatch with their regulatory orientation), while participants with strong unhealthy snacking habits consumed more healthy snacks only when forming implementation intentions that matched their regulatory orientations. RESULTS suggest that implementation intentions that match regulatory orientation heighten motivation intensity and put snacking under intentional control for people with strong unhealthy snacking habits. (c) 2010 APA, all rights reserved.

ARACHNID: A prototype object-oriented database tool for distributed systems

NASA Technical Reports Server (NTRS)

Younger, Herbert; Oreilly, John; Frogner, Bjorn

1994-01-01

This paper discusses the results of a Phase 2 SBIR project sponsored by NASA and performed by MIMD Systems, Inc. A major objective of this project was to develop specific concepts for improved performance in accessing large databases. An object-oriented and distributed approach was used for the general design, while a geographical decomposition was used as a specific solution. The resulting software framework is called ARACHNID. The Faint Source Catalog developed by NASA was the initial database testbed. This is a database of many giga-bytes, where an order of magnitude improvement in query speed is being sought. This database contains faint infrared point sources obtained from telescope measurements of the sky. A geographical decomposition of this database is an attractive approach to dividing it into pieces. Each piece can then be searched on individual processors with only a weak data linkage between the processors being required. As a further demonstration of the concepts implemented in ARACHNID, a tourist information system is discussed. This version of ARACHNID is the commercial result of the project. It is a distributed, networked, database application where speed, maintenance, and reliability are important considerations. This paper focuses on the design concepts and technologies that form the basis for ARACHNID.

US NDC Modernization: Service Oriented Architecture Proof of Concept

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hamlet, Benjamin R.; Encarnacao, Andre Villanova; Jackson, Keilan R.

2014-12-01

This report is a progress update on the US NDC Modernization Service Oriented Architecture (SOA) study describing results from a proof of concept project completed from May through September 2013. Goals for this proof of concept are 1) gain experience configuring, using, and running an Enterprise Service Bus (ESB), 2) understand the implications of wrapping existing software in standardized interfaces for use as web services, and 3) gather performance metrics for a notional seismic event monitoring pipeline implemented using services with various data access and communication patterns. The proof of concept is a follow on to a previous SOA performancemore » study. Work was performed by four undergraduate summer student interns under the guidance of Sandia staff.« less

Photochemical Phenomenology Model for the New Millennium

NASA Technical Reports Server (NTRS)

Bishop, James; Evans, J. Scott

2001-01-01

The "Photochemical Phenomenology Model for the New Millennium" project tackles the issue of reengineering and extension of validated physics-based modeling capabilities ("legacy" computer codes) to application-oriented software for use in science and science-support activities. While the design and architecture layouts are in terms of general particle distributions involved in scattering, impact, and reactive interactions, initial Photochemical Phenomenology Modeling Tool (PPMT) implementations are aimed at construction and evaluation of photochemical transport models with rapid execution for use in remote sensing data analysis activities in distributed systems. Current focus is on the Composite Infrared Spectrometer (CIRS) data acquired during the CASSINI flyby of Jupiter. Overall, the project has stayed on the development track outlined in the Year 1 annual report and most Year 2 goals have been met. The issues that have required the most attention are: implementation of the core photochemistry algorithms; implementation of a functional Java Graphical User Interface; completion of a functional CORBA Component Model framework; and assessment of performance issues. Specific accomplishments and the difficulties encountered are summarized in this report. Work to be carried out in the next year center on: completion of testing of the initial operational implementation; its application to analysis of the CASSINI/CIRS Jovian flyby data; extension of the PPMT to incorporate additional phenomenology algorithms; and delivery of a mature operational implementation.

Dynamic Education as a Modern Education System of University

NASA Astrophysics Data System (ADS)

Buranská, Eva; Buranský, Ivan

2014-06-01

The contribution discusses the issue of modern education system of university. This method of education was designed within the KEGA project. Implementation of on-line classroom for dynamic education of the secondary technical school and university students focused on the design and manufacturing of freeform surfaces. The main objective of this teaching method of is improving the parent faculty cooperation with training centres and increasing the interest of secondary school students in the university studies of technical orientation.

Iplt--image processing library and toolkit for the electron microscopy community.

PubMed

Philippsen, Ansgar; Schenk, Andreas D; Stahlberg, Henning; Engel, Andreas

2003-01-01

We present the foundation for establishing a modular, collaborative, integrated, open-source architecture for image processing of electron microscopy images, named iplt. It is designed around object oriented paradigms and implemented using the programming languages C++ and Python. In many aspects it deviates from classical image processing approaches. This paper intends to motivate developers within the community to participate in this on-going project. The iplt homepage can be found at http://www.iplt.org.

The Implementation of Satellite Attitude Control System Software Using Object Oriented Design

NASA Technical Reports Server (NTRS)

Reid, W. Mark; Hansell, William; Phillips, Tom; Anderson, Mark O.; Drury, Derek

1998-01-01

NASA established the Small Explorer (SNMX) program in 1988 to provide frequent opportunities for highly focused and relatively inexpensive space science missions. The SMEX program has produced five satellites, three of which have been successfully launched. The remaining two spacecraft are scheduled for launch within the coming year. NASA has recently developed a prototype for the next generation Small Explorer spacecraft (SMEX-Lite). This paper describes the object-oriented design (OOD) of the SMEX-Lite Attitude Control System (ACS) software. The SMEX-Lite ACS is three-axis controlled and is capable of performing sub-arc-minute pointing. This paper first describes high level requirements governing the SMEX-Lite ACS software architecture. Next, the context in which the software resides is explained. The paper describes the principles of encapsulation, inheritance, and polymorphism with respect to the implementation of an ACS software system. This paper will also discuss the design of several ACS software components. Specifically, object-oriented designs are presented for sensor data processing, attitude determination, attitude control, and failure detection. Finally, this paper will address the establishment of the ACS Foundation Class (AFC) Library. The AFC is a large software repository, requiring a minimal amount of code modifications to produce ACS software for future projects.

Total quality management in blood transfusion.

PubMed

Smit-Sibinga, C T

2000-01-01

Quality management is an ongoing development resulting in consistency products and services and ever increasing customer satisfaction. The ultimum is Total Quality Management. Quality systems and quality management in transfusion medicine have gained considerable attention since the outbreak of the AIDS epidemic. Where product orientation has long been applied through quality control, Good Manufacturing Practice (GMP) principles were introduced, shifting the developments in the direction of process orientation. Globally, and particularly in the more industrialised world people and system orientation has come along with the introduction of the ISO9001 concept. Harmonisation and a degree of uniformity are needed to implement a universally applicable Quality System and related Quality Management. Where the American Association of Blood Banks (AABB) is the professional organisation with the most extensive experience in quality systems in blood transfusion, the European Union and the Council of Europe now are in the process to design a quality system and management applicable to a larger variety of countries, based on a hybrid of current GMP and ISO9001 principles. The International Federation of Red Cross and Red Crescent Societies has developed a more universally to implement Quality Manual, with a pilot project in Honduras. It is recommendable to harmonise the various designs and bring the approaches under one common denominator.

Supporting Goal-Oriented Primary Health Care for Seniors with Complex Care Needs Using Mobile Technology: Evaluation and Implementation of the Health System Performance Research Network, Bridgepoint Electronic Patient Reported Outcome Tool.

PubMed

Steele Gray, Carolyn; Wodchis, Walter P; Upshur, Ross; Cott, Cheryl; McKinstry, Brian; Mercer, Stewart; Palen, Ted E; Ramsay, Tim; Thavorn, Kednapa

2016-06-24

Older adults experiencing multiple chronic illnesses are at high risk of hospitalization and health decline if they are unable to manage the significant challenges posed by their health conditions. Goal-oriented care approaches can provide better care for these complex patients, but clinicians find the process of ascertaining goals "too complex and too-time consuming," and goals are often not agreed upon between complex patients and their providers. The electronic patient reported outcomes (ePRO) mobile app and portal offers an innovative approach to creating and monitoring goal-oriented patient-care plans to improve patient self-management and shared decision-making between patients and health care providers. The ePRO tool also supports proactive patient monitoring by the patient, caregiver(s), and health care provider. It was developed with and for older adults with complex care needs as a means to improve their quality of life. Our proposed project will evaluate the use, effectiveness, and value for money of the ePRO tool in a 12-month multicenter, randomized controlled trial in Ontario; targeting individuals 65 or over with two or more chronic conditions that require frequent health care visits to manage their health conditions. Intervention groups using the ePRO tool will be compared with control groups on measures of quality of life, patient experience, and cost-effectiveness. We will also evaluate the implementation of the tool. The proposed project presented in this paper will be funded through the Canadian Institute for Health Research (CIHR) eHealth Innovation Partnerships Program (eHIPP) program (CIHR-348362). The expected completion date of the study is November, 2019. We anticipate our program of work will support improved quality of life and patient self-management, improved patient-centered primary care delivery, and will encourage the adoption of goal-oriented care approaches across primary health care systems. We have partnered with family health teams and quality improvement organizations in Ontario to ensure that our research is practical and that findings are shared widely. We will work with our established international network to develop an implementation framework to support continued adaptation and adoption across Canada and internationally.

Supporting Goal-Oriented Primary Health Care for Seniors with Complex Care Needs Using Mobile Technology: Evaluation and Implementation of the Health System Performance Research Network, Bridgepoint Electronic Patient Reported Outcome Tool

PubMed Central

Wodchis, Walter P; Upshur, Ross; Cott, Cheryl; McKinstry, Brian; Mercer, Stewart; Palen, Ted E; Ramsay, Tim; Thavorn, Kednapa

2016-01-01

Background Older adults experiencing multiple chronic illnesses are at high risk of hospitalization and health decline if they are unable to manage the significant challenges posed by their health conditions. Goal-oriented care approaches can provide better care for these complex patients, but clinicians find the process of ascertaining goals “too complex and too-time consuming,” and goals are often not agreed upon between complex patients and their providers. The electronic patient reported outcomes (ePRO) mobile app and portal offers an innovative approach to creating and monitoring goal-oriented patient-care plans to improve patient self-management and shared decision-making between patients and health care providers. The ePRO tool also supports proactive patient monitoring by the patient, caregiver(s), and health care provider. It was developed with and for older adults with complex care needs as a means to improve their quality of life. Objective Our proposed project will evaluate the use, effectiveness, and value for money of the ePRO tool in a 12-month multicenter, randomized controlled trial in Ontario; targeting individuals 65 or over with two or more chronic conditions that require frequent health care visits to manage their health conditions. Methods Intervention groups using the ePRO tool will be compared with control groups on measures of quality of life, patient experience, and cost-effectiveness. We will also evaluate the implementation of the tool. Results The proposed project presented in this paper will be funded through the Canadian Institute for Health Research (CIHR) eHealth Innovation Partnerships Program (eHIPP) program (CIHR–143559). The expected completion date of the study is November, 2019. Conclusions We anticipate our program of work will support improved quality of life and patient self-management, improved patient-centered primary care delivery, and will encourage the adoption of goal-oriented care approaches across primary health care systems. We have partnered with family health teams and quality improvement organizations in Ontario to ensure that our research is practical and that findings are shared widely. We will work with our established international network to develop an implementation framework to support continued adaptation and adoption across Canada and internationally. PMID:27341765

Lessons learned: the switch from VMS to UNIX operations for the STScI's Science and Mission Scheduling Branch

NASA Astrophysics Data System (ADS)

Adler, David S.; Workman, William M., III; Chance, Don

2004-09-01

The Science and Mission Scheduling Branch (SMSB) of the Space Telescope Science Institute (STScI) historically operated exclusively under VMS. Due to diminished support for VMS-based platforms at STScI, SMSB recently transitioned to Unix operations. No additional resources were available to the group; the project was SMSB's to design, develop, and implement. Early decisions included the choice of Python as the primary scripting language; adoption of Object-Oriented Design in the development of base utilities; and the development of a Python utility to interact directly with the Sybase database. The project was completed in January 2004 with the implementation of a GUI to generate the Command Loads that are uplinked to HST. The current tool suite consists of 31 utilities and 271 tools comprising over 60,000 lines of code. In this paper, we summarize the decision-making process used to determine the primary scripting language, database interface, and code management library. We also describe the finished product and summarize lessons learned along the way to completing the project.

Geocoding and social marketing in Alabama's cancer prevention programs.

PubMed

Miner, Julianna W; White, Arica; Lubenow, Anne E; Palmer, Sally

2005-11-01

The Alabama Department of Public Health (ADPH) is collaborating with the National Cancer Institute to develop detailed profiles of underserved Alabama communities most at risk for cancer. These profiles will be combined with geocoded data to create a pilot project, Cancer Prevention for Alabama's Underserved Populations: A Focused Approach. The project's objectives are to provide the ADPH's cancer prevention programs with a more accurate and cost-effective means of planning, implementing, and evaluating its prevention activities in an outcomes-oriented and population-appropriate manner. The project links geocoded data from the Alabama Statewide Cancer Registry with profiles generated by the National Cancer Institute's cancer profiling system, Consumer Health Profiles. These profiles have been successfully applied to market-focused cancer prevention messages across the United States. The ADPH and the National Cancer Institute will evaluate the efficacy of using geocoded data and lifestyle segmentation information in strategy development and program implementation. Alabama is the first state in the nation not only to link geocoded cancer registry data with lifestyle segmentation data but also to use the National Cancer Institute's profiles and methodology in combination with actual state data.

Empirical and conceptual investigation of de-implementation of low-value care from professional and health care system perspectives: a study protocol.

PubMed

Hasson, Henna; Nilsen, Per; Augustsson, Hanna; von Thiele Schwarz, Ulrica

2018-05-15

A considerable proportion of interventions provided to patients lacks evidence of their effectiveness. This implies that patients may receive ineffective, unnecessary, or even harmful care. Thus, in addition to implementing evidence-based practices, there is also a need to abandon interventions that are not based on best evidence, i.e., low-value care. However, research on de-implementation is limited, and there is a lack of knowledge about how effective de-implementation processes should be carried out. The aim of this project is to explore the phenomenon of the de-implementation of low-value health care practices from the perspective of professionals and the health care system. Theories of habits and developmental learning in combination with theories of organizational alignment will be used. The project's work will be conducted in five steps. Step 1 is a scoping review of the literature, and Step 2 has an explorative design involving interviews with health care stakeholders. Step 3 has a prospective design in which workplaces and professionals are shadowed during an ongoing de-implementation. In Step 4, a conceptual framework for de-implementation will be developed based on the previous steps. In Step 5, strategies for de-implementation are identified using a co-design approach. This project contributes new knowledge to implementation science consisting of empirical data, a conceptual framework, and strategy suggestions on de-implementation of low-value care. The professionals' perspectives will be highlighted, including insights into how they make decisions, handle de-implementation in daily practice, and what consequences it has on their work. Furthermore, the health care system perspective will be considered and new knowledge on how de-implementation can be understood across health care system levels will be obtained. The theories of habits and developmental learning can also offer insights into how context triggers and reinforces certain behaviors and how factors at the individual and the organizational levels interact. The project employs a solution-oriented perspective by developing a framework for de-implementation of low-value practices and suggesting practical strategies to improve de-implementation processes at all levels of the health care system. The framework and the strategies can thereafter be evaluated for their validity and impact in future studies.

Breaking ground in Tanzania. GO-NGO collaboration.

PubMed

1998-05-01

JOICFP's reproductive health(RH)-oriented Integrated Project (IP) is being implemented by JOICFP's counterpart, the Family Planning Association of Tanzania (UMATI). The Japanese government usually provides support to help governmental programs. However, through this collaborative effort, the government of Japan is providing commodity and equipment assistance to support the RH/family planning and safe motherhood activities promoted by UMATI in collaboration with the Tanzanian government, with support provided through multilateral-bilateral assistance in collaboration with UNFPA. The Japanese government has agreed to provide US$170,000 annually in commodity and equipment assistance to the project over the period 1997-2000. The funds will be used to support family planning/maternal and child health clinics and dispensaries in project areas run by the government, as well as to support UMATI activities.

Students implement the Affordable Care Act: a model for undergraduate teaching and research in community health and sociology.

PubMed

Green, Brandn; Jones, Kristal; Boyd, Neil; Milofsky, Carl; Martin, Eric

2015-06-01

The implementation of the Affordable Care Act (ACA) provides an opportunity for undergraduate students to observe and experience first-hand changing social policies and their impacts for individuals and communities. This article overviews an action research and teaching project developed at an undergraduate liberal arts university and focused on providing ACA enrollment assistance as a way to support student engagement with community health. The project was oriented around education, enrollment and evaluation activities in the community, and students and faculty together reflected on and analyzed the experiences that came from the research and outreach project. Student learning centered around applying concepts of diversity and political agency to health policy and community health systems. Students reported and faculty observed an unexpected empowerment for students who were able to use their university-learned critical thinking skills to explain complex systems to a wide range of audiences. In addition, because the project was centered at a university with no health professions programs, the project provided students interested in community and public health with the opportunity to reflect on how health and access to health care is conditioned by social context. The structure and pedagogical approaches and implications of the action research and teaching project is presented here as a case study for how to engage undergraduates in questions of community and public health through the lens of health policy and community engagement.

Fostering Soft Skills in Project-Oriented Learning within an Agile Atmosphere

ERIC Educational Resources Information Center

Chassidim, Hadas; Almog, Dani; Mark, Shlomo

2018-01-01

The project-oriented and Agile approaches have motivated a new generation of software engineers. Within the academic curriculum, the issue of whether students are being sufficiently prepared for the future has been raised. The objective of this work is to present the project-oriented environment as an influential factor that software engineering…

On AIPS++, a new astronomical information processing system

NASA Technical Reports Server (NTRS)

Croes, G. A.

1992-01-01

The AIPS system that has served the needs of the radio astronomical community remarkably well during the last 15 years is showing signs of age and is being replaced by a more modern system, AIPS++. As the name implies, AIPS++ will be developed in a object oriented fashion and will use C++ as its main programming language. The work is being done by a consortium of seven organizations, with coordinated activities worldwide. After a review of the history of the project to this date from management, astronomical and technical viewpoints, and the current state of the project, the paper concentrates on the tradeoffs implied by the choice of implementation style and the lessons we have learned, good and bad.

Simulator Network Project Report: A tool for improvement of teaching materials and targeted resource usage in Skills Labs

PubMed Central

Damanakis, Alexander; Blaum, Wolf E.; Stosch, Christoph; Lauener, Hansjörg; Richter, Sabine; Schnabel, Kai P.

2013-01-01

During the last decade, medical education in the German-speaking world has been striving to become more practice-oriented. This is currently being achieved in many schools through the implementation of simulation-based instruction in Skills Labs. Simulators are thus an essential part of this type of medical training, and their acquisition and operation by a Skills Lab require a large outlay of resources. Therefore, the Practical Skills Committee of the Medical Education Society (GMA) introduced a new project, which aims to improve the flow of information between the Skills Labs and enable a transparent assessment of the simulators via an online database (the Simulator Network). PMID:23467581

Design and Implementation of an Integrated Screen-Oriented Text Editing and Formatting System.

DTIC Science & Technology

1980-06-01

AD-AG92 180 NAVAL POSTGRADUATE SCHOOL MONTEREY CA F/G V/2 DESIGN AND IMPLEMENTATION OF AN INTEGRATED SCREEN-ORIENTED TEXT--ETC(, JUN 80 L A TALMAGE...1963-A wI NAVAL POSTGRADUATE SCHOOL Monterey, California 0 THESISA DESIGN AND IMPLEMENTATION OF AN INTEGRATED SCREEN-ORIENTED TEXT EDITING AND...processors are described. The state-of-the-art in text processing is examined. Design and implementation considerations in developing an interactive

The Value of Electronic Medical Record Implementation in Mental Health Care: A Case Study.

PubMed

Riahi, Sanaz; Fischler, Ilan; Stuckey, Melanie I; Klassen, Philip E; Chen, John

2017-01-05

Electronic medical records (EMR) have been implemented in many organizations to improve the quality of care. Evidence supporting the value added to a recovery-oriented mental health facility is lacking. The goal of this project was to implement and customize a fully integrated EMR system in a specialized, recovery-oriented mental health care facility. This evaluation examined the outcomes of quality improvement initiatives driven by the EMR to determine the value that the EMR brought to the organization. The setting was a tertiary-level mental health facility in Ontario, Canada. Clinical informatics and decision support worked closely with point-of-care staff to develop workflows and documentation tools in the EMR. The primary initiatives were implementation of modules for closed loop medication administration, collaborative plan of care, clinical practice guidelines for schizophrenia, restraint minimization, the infection prevention and control surveillance status board, drug of abuse screening, and business intelligence. Medication and patient scan rates have been greater than 95% since April 2014, mitigating the adverse effects of medication errors. Specifically, between April 2014 and March 2015, only 1 moderately severe and 0 severe adverse drug events occurred. The number of restraint incidents decreased 19.7%, which resulted in cost savings of more than Can $1.4 million (US $1.0 million) over 2 years. Implementation of clinical practice guidelines for schizophrenia increased adherence to evidence-based practices, standardizing care across the facility. Improved infection prevention and control surveillance reduced the number of outbreak days from 47 in the year preceding implementation of the status board to 7 days in the year following. Decision support to encourage preferential use of the cost-effective drug of abuse screen when clinically indicated resulted in organizational cost savings. EMR implementation allowed Ontario Shores Centre for Mental Health Sciences to use data analytics to identify and select appropriate quality improvement initiatives, supporting patient-centered, recovery-oriented practices and providing value at the clinical, organizational, and societal levels. ©Sanaz Riahi, Ilan Fischler, Melanie I Stuckey, Philip E Klassen, John Chen. Originally published in JMIR Medical Informatics (http://medinform.jmir.org), 05.01.2017.

Graphical User Interface for an Observing Control System for the UK Infrared Telescope

NASA Astrophysics Data System (ADS)

Tan, M.; Bridger, A.; Wright, G. S.; Adamson, A. J.; Currie, M. J.; Economou, F.

A Graphical user interface for the observing control system of UK Infrared Telescope has been developed as a part of the ORAC (Observatory Reduction and Acquisition Control) Project. We analyzed and designed the system using the Unified Modelling Language (UML) with the CASE tool Rational Rose 98. The system has been implemented in a modular way with Java packages using Swing and RMI. This system is component-based with pluggability. Object orientation concepts and UML notations have been applied throughout the development.

Orienting and Onboarding Clinical Nurse Specialists: A Process Improvement Project.

PubMed

Garcia, Mayra G; Watt, Jennifer L; Falder-Saeed, Karie; Lewis, Brennan; Patton, Lindsey

Clinical nurse specialists (CNSs) have a unique advanced practice role. This article describes a process useful in establishing a comprehensive orientation and onboarding program for a newly hired CNS. The project team used the National Association of Clinical Nurse Specialists core competencies as a guide to construct a process for effectively onboarding and orienting newly hired CNSs. Standardized documents were created for the orientation process including a competency checklist, needs assessment template, and professional evaluation goals. In addition, other documents were revised to streamline the orientation process. Standardizing the onboarding and orientation process has demonstrated favorable results. As of 2016, 3 CNSs have successfully been oriented and onboarded using the new process. Unique healthcare roles require special focus when onboarding and orienting into a healthcare system. The use of the National Association of Clinical Nurse Specialists core competencies guided the project in establishing a successful orientation and onboarding process for newly hired CNSs.

A new approach to configurable primary data collection.

PubMed

Stanek, J; Babkin, E; Zubov, M

2016-09-01

The formats, semantics and operational rules of data processing tasks in genomics (and health in general) are highly divergent and can rapidly change. In such an environment, the problem of consistent transformation and loading of heterogeneous input data to various target repositories becomes a critical success factor. The objective of the project was to design a new conceptual approach to configurable data transformation, de-identification, and submission of health and genomic data sets. Main motivation was to facilitate automated or human-driven data uploading, as well as consolidation of heterogeneous sources in large genomic or health projects. Modern methods of on-demand specialization of generic software components were applied. For specification of input-output data and required data collection activities, we propose a simple data model of flat tables as well as a domain-oriented graphical interface and portable representation of transformations in XML. Using such methods, the prototype of the Configurable Data Collection System (CDCS) was implemented in Java programming language with Swing graphical interfaces. The core logic of transformations was implemented as a library of reusable plugins. The solution is implemented as a software prototype for a configurable service-oriented system for semi-automatic data collection, transformation, sanitization and safe uploading to heterogeneous data repositories-CDCS. To address the dynamic nature of data schemas and data collection processes, the CDCS prototype facilitates interactive, user-driven configuration of the data collection process and extends basic functionality with a wide range of third-party plugins. Notably, our solution also allows for the reduction of manual data entry for data originally missing in the output data sets. First experiments and feedback from domain experts confirm the prototype is flexible, configurable and extensible; runs well on data owner's systems; and is not dependent on vendor's standards. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

[Training of communication skills in stationary long care homes--the evaluation of a model project to develop communication skills and transfer it into practice].

PubMed

Heinemann-Knoch, M; Korte, E; Heusinger, J; Klünder, M; Knoch, T

2005-02-01

The training of communication skills of professional caregivers in six homes for elderly people has been developed and evaluated in a model project. The purpose of the project was to strengthen the staff's orientation towards the residents, their needs, handicaps and abilities. Therefore, a series of 8 in-house training courses as well as procedures to establish the contents of the program into daily care-giving (transfer) have been developed and implemented with six teams during one year. The evaluation included interviews, questionnaires and observations and was realized with participants and non-participants of the program once before the implementation of the training program and once afterwards. We found evidence for positive effects of the training: although the staff's positive self perception of the climate of communication remained stable and mainly not affected by the training, this was contradictory to the observations. The way of giving information to the residents was improved by the training program as well as the quality of relations between staff and residents. Again, sending messages about oneself which are not care-oriented had not been affected by the training-as to the observations of care giving situations. Although the staff's self perception about the change of sending these messages was highly positive.Thus, the further development of the training program has to consider these effects.To establish the transfer of the training program into daily care giving, it proved to be helpful to specify exercises after each session which had to be carried out and discussed by the participants until the next training session.

Project Ci-Nergy Towards AN Integrated Energy Urban Planning System from a Data Modelling and System Architecture Perspective

NASA Astrophysics Data System (ADS)

Agugiaro, G.; Robineau, J.-L.; Rodrigues, P.

2017-09-01

Growing urbanisation, its related environmental impacts, and social inequalities in cities are challenges requiring a holistic urban planning perspective that takes into account the different aspects of sustainable development. One crucial point is to reconcile urban planning with environmental targets, which include decreasing energy demand and CO2 emissions, and increasing the share of renewable energy. Within this context, the project CI-NERGY aims to develop urban energy modelling, simulation and optimisation methods and tools to support decision making in urban planning. However, there are several barriers to the implementation of such tools, such as: fragmentation of involved disciplines, different stakeholders, multiplicity of scales in a city and extreme heterogeneity of data regarding all the processes to be addressed. Project CI-NERGY aims, among other goals, at overcoming these barriers, and focuses on two case study cities, Geneva in Switzerland and Vienna in Austria. In particular, project CI-NERGY faces several challenges starting with different cities, heterogeneous data sources and simulation tools, diverse user groups and their individual needs. This paper describes the experiences gathered during the project. After giving a brief overview of the project, the two case study cities, Geneva and Vienna, are briefly presented, and the focus shifts then on overall system architecture of the project, ranging from urban data modelling topics to the implementation of a Service-Oriented Architecture. Some of the challenges faced, the solutions found, as well some plans for future improvements are described and commented.

iCrowd: agent-based behavior modeling and crowd simulator

NASA Astrophysics Data System (ADS)

Kountouriotis, Vassilios I.; Paterakis, Manolis; Thomopoulos, Stelios C. A.

2016-05-01

Initially designed in the context of the TASS (Total Airport Security System) FP-7 project, the Crowd Simulation platform developed by the Integrated Systems Lab of the Institute of Informatics and Telecommunications at N.C.S.R. Demokritos, has evolved into a complete domain-independent agent-based behavior simulator with an emphasis on crowd behavior and building evacuation simulation. Under continuous development, it reflects an effort to implement a modern, multithreaded, data-oriented simulation engine employing latest state-of-the-art programming technologies and paradigms. It is based on an extensible architecture that separates core services from the individual layers of agent behavior, offering a concrete simulation kernel designed for high-performance and stability. Its primary goal is to deliver an abstract platform to facilitate implementation of several Agent-Based Simulation solutions with applicability in several domains of knowledge, such as: (i) Crowd behavior simulation during [in/out] door evacuation. (ii) Non-Player Character AI for Game-oriented applications and Gamification activities. (iii) Vessel traffic modeling and simulation for Maritime Security and Surveillance applications. (iv) Urban and Highway Traffic and Transportation Simulations. (v) Social Behavior Simulation and Modeling.

Data Acquisition Visualization Development for the MAJORANA DEMONSTRATOR

NASA Astrophysics Data System (ADS)

Wendlandt, Laura; Howe, Mark; Wilkerson, John; Majorana Collaboration

2013-10-01

The MAJORANA Project is building an array of germanium detectors with very low backgrounds in order to search for neutrinoless double-beta decay, a rare process that, if detected, would give us information about neutrinos. This decay would prove that neutrinos are their own anti-particles, would show that lepton number is not conserved, and would help determine absolute neutrino mass. An object-oriented, data acquisition software program known as ORCA (Object-oriented Real-time Control and Acquisition) will be used to collect data from the array. This paper describes the implementation of computer visualizations for detector calibrations, as well as tools for more general computer modeling in ORCA. Specifically, it details software that converts a CAD file to OpenGL, which can be used in ORCA. This paper also contains information about using a barium-133 source to take measurements from various locations around the detector, to better understand how data varies with detector crystal orientation. Work made possible by National Science Foundation Award OCI-1155614.

Transformation to a recovery-oriented model of care on a veterans administration inpatient unit.

PubMed

Zuehlke, Jessica B; Kotecki, Robert M; Kern, Shira; Sholty, Gretchen; Hauser, Peter

2016-12-01

Recovery-oriented care is among the highest treatment priorities for the Veteran Health Administration, which has endorsed organizational change of mental health care to reflect recovery values. The purpose of this quality improvement project was to determine whether recovery interventions would yield positive outcomes when delivered on in inpatient psychiatry. Recovery interventions on the unit included recovery-focused interdisciplinary team meetings, opportunities for stakeholder feedback, recovery staff education, increased group programming, peer support, and changes to treatment planning to include increased Veteran engagement and responsibility. Participants included 352 patients and 27 staff. Outcomes were number of restraints/seclusions used, 30-day readmission rates, and staff satisfaction. Our results showed an overall decrease in restraint/seclusion use by over 50% and an increase in staff satisfaction. Our results suggest that implementing a recovery-oriented model of care in an acute psychiatric inpatient unit may have significant benefits for both staff and patients. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

An exchange format for use-cases of hospital information systems.

PubMed

Masuda, G; Sakamoto, N; Sakai, R; Yamamoto, R

2001-01-01

Object-oriented software development is a powerful methodology for development of large hospital information systems. We think use-case driven approach is particularly useful for the development. In the use-cases driven approach, use-cases are documented at the first stage in the software development process and they are used through the whole steps in a variety of ways. Therefore, it is important to exchange and share the use-cases and make effective use of them through the overall lifecycle of a development process. In this paper, we propose a method of sharing and exchanging use-case models between applications, developers, and projects. We design an XML based exchange format for use-cases. We then discuss an application of the exchange format to support several software development activities. We preliminarily implemented a support system for object-oriented analysis based on the exchange format. The result shows that using the structural and semantic information in the exchange format enables the support system to assist the object-oriented analysis successfully.

Developing a typology for local cattle breed farmers in Europe.

PubMed

Soini, K; Diaz, C; Gandini, G; de Haas, Y; Lilja, T; Martin-Collado, D; Pizzi, F; Hiemstra, S J

2012-12-01

Recognizing cultural diversity among local breed farmers is crucial for the successful development and implementation of farm animal genetic resources FAnGr conservation policies and programmes. In this study based on survey data collected in the EUropean REgional CAttle breeds project from six European countries, a typology of local breed farmers was designed and profiles for each of the farmer types were developed to assist these policy needs. Three main farmer types were constructed: production-oriented, product and service-oriented and hobby-oriented farmers. In addition, seven subtypes were characterized under the main types: sustainable producers, opportunists, multi-users, brand makers, traditionalists, pragmatists and newcomers. These types have many similarities to the 'productivist', 'multifunctional' and 'post-productivist' farmer types. The typology not only reveals the high level of diversity among local cattle breed farmers in Europe, which presents an opportunity for the in situ conservation of animal genetic resources, but also a challenge for policy to meet the differing requirements of the farmer types. © 2012 Blackwell Verlag GmbH.

Three Object-Oriented enhancement for EPICS

NASA Astrophysics Data System (ADS)

Osberg, E. A.; Dohan, D. A.; Richter, R.; Biggs, R.; Chillara, K.; Wade, D.; Bossom, J.

1994-12-01

In line with our group's intention of producing software using, where possible, Object-Oriented methodologies and techniques in the development of RF control systems, we have undertaken three projects to enhance the EPICS software environment. Two of the projects involve interfaces to EPICs Channel Access from Object-Oriented languages. The third is an enhancement to the EPICS State Notation Language to better support the Shlaer-Mellor Object-Oriented Analysis and Design Methodology. This paper discusses the motivation, approaches, results and future directions of these three projects.

Individualizing the Orientation Process for Newly Hired CRNAs in a Large Academic Medical Center

ERIC Educational Resources Information Center

Gorman, Katherine

2017-01-01

Purpose: The purpose of this scholarly project was to investigate whether an individualized clinical orientation would result in a shortened time to orient and integrate Certified Registered Nurse Anesthetists (CRNAs) into practice in a large academic medical center. By individualizing the orientation process, this project seeks to determine if…

[Current Research Activities on Person-Centered Medicine in Academic Institutes of General Practice in Germany and Austria].

PubMed

Weber, Annemarie; Schelling, Jörg; Kohls, Niko; van Dyck, Marcus; Poggenburg, Stephanie; Vajda, Christian; Hirsch, Jameson; Sirois, Fuschia; Toussaint, Loren; Offenbächer, Martin

2017-10-11

Aim of study Person-centered medicine (PCM) with its focus on humanistic-biographical-oriented medicine and integrated, positive-salutogenic health is a central aspect in the patient-physician relationship in general practice. The objective of this analysis is to assess the prevalence and type of research project in academic institutions of general practice in Germany (Ger) and Austria (At) and the thematic priorities of the projects in the areas PCM, health promotion (HP), prevention (PRE) and conventional medicine (CM). Methods A search was conducted (September-December 2015) on the websites of 30 institutes and divisions of general medicine for their current research projects. The retrieved projects were assigned to five categories: PCM, HP, PRE, CM and others. Subsequently, we identified the targeted patient groups of the projects as well as the thematic focus in the categories PCM, HP, PRE and CM with focus on PCM and HP. Results 541 research projects were identified, 452 in Germany and 89 in Austria. Research projects were only included if they were explicitly indicated as research-oriented. Seventy projects addressed PCM aspects, 15 projects HP aspects, 32 projects PRE aspects and 396 projects CM aspects. The most frequently target groups in the categories PCM (24 of 70) and HP (7 of 15) were chronically ill patients. The most common thematic focus in PCM was communication (13 of 70) and in HP, physical activity (6 of 15). Conclusion The vast majority of research projects investigated conventional medical topics. The percentage of research activities in the field of PCM (13%) or PCM including HP (16%) in Ger and At is below the European average of 20%. From our point of view, PCM and HP need to be implemented to a greater extent in general practice. © Georg Thieme Verlag KG Stuttgart · New York.

Predictive Engineering Tools for Injection-Molded Long-Carbon-Fiber Thermoplastic Composites - FY 2015 First Quarterly Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nguyen, Ba Nghiep; Fifield, Leonard S.; Kijewski, Seth A.

2015-01-29

During the first quarter of FY 2015, the following technical progress has been made toward project milestones: 1) Autodesk delivered a new research version of ASMI to PNNL. This version includes the improved 3D fiber orientation solver, and the reduced order model (ROM) for fiber length distribution using the proper orthogonal decomposition (POD) implemented in the mid-plane, dual-domain and 3D solvers. 2) Autodesk coordinated a conference paper with PNNL reporting ASMI mid-plane fiber orientation predictions compared with the measured data for two PlastiComp plaques. This paper was accepted for presentation at the 2015 Society for Plastics Engineers (SPE) ANTEC conference.more » 3) The University of Illinois (Prof. Tucker) assisted team members from Purdue with fiber orientation measurement techniques, including interpretation of off-axis cross sections. 4) The University of Illinois assisted Autodesk team members with software implementation of the POD approach for fiber length modeling, and with fiber orientation modeling. 5) The University of Illinois co-authored in the SPE ANTEC paper, participated with the team in discussions of plaque data and model results, and participated in the definition of go/no-go experiments and data. 6) Purdue University (Purdue) conducted fiber orientation measurements for 3 PlastiComp plaques: fast-fill 30wt% LCF/PP center-gated, fast-fill 50wt% LCF/PA66 edge-gated and fast-fill 50wt% LCF/PA66 center-gated plaques, and delivered the fiber orientation data for these plaques at the selected locations (named A, B, and C) to PNNL. However, the data for the fast-fill 50wt% LCF/PA66 edge-gated plaque exhibited unusual variations and could not be used for the model validation. Purdue will re-measure fiber orientation for this plaque. 7) Based on discussions with the University of Illinois Purdue explained the ambiguity in the measurements of the fiber orientation components. 8) PNNL discussed with team members to establish a go/no-go decision plan for the project and submitted the established plan to DOE. 9) PNNL performed ASMI mid-plane analyses for the fast-fill center-gated 30wt% LCF/PP and 50wt% LCF/PA66 plaques and compared the predicted fiber orientations with the measured data provided by Purdue at Locations A, B, and C on these plaques. 10) Based on discussions with the University of Illinois and Autodesk, PNNL proposed a procedure to adjust fiber orientation data for Location A of the center-gated plaques so that the data can be expressed and interpreted in the flow/cross-flow direction coordinate system. 11) PNNL tested the new ASMI version received from Autodesk, examined and discussed 3D fiber orientation predictions for PlastiComp plaques. 12) PlastiComp, Inc. (PlastiComp), Toyota Research Institute North America (Toyota) and Magna Exteriors and Interiors Corp. (Magna) participated in discussions with team members on the go/no-go plan and the issues related to fiber length measurements. Toyota continued the discussion with Magna on tool modification for molding the complex part in order to achieve the target fiber length in the part.« less

The DNP project: Quandaries for nursing scholars.

PubMed

Dols, Jean Dowling; Hernández, Christina; Miles, Heather

In the evolving Doctor of Nursing Practice (DNP) movement, there continues to be a lack of agreement about the final scholarly project. This study identifies and describes the faculty practices and challenges related to the DNP project across the United States. In a descriptive research study, 90 DNP program directors responded to an online survey describing the environment of the DNP program with emphasis on the final scholarly project. According to the respondents, 87% of faculty are somewhat or very dissatisfied with the DNP project. Elements that may contribute to the dissatisfaction are the reported lack of faculty knowledge of evidence-based practice and quality improvement, lack of consensus on the DNP project, lack of faculty resources for DNP projects, challenges with clinical sites for the DNP project, and students' scholarly writing skills. It is imperative to have academic/practice faculty oriented to DNP concepts; achieve consensus on the project title, type, depth, and outcomes; and have an ongoing dialog regarding DNP project design, execution, and challenges. Project implementation models need to be appropriate for the escalating DNP enrollment. Program support related to institutional review board relationships, student writing and statistical skills, and program-practice site partnerships are needed. Copyright © 2016 Elsevier Inc. All rights reserved.

Developing nursing capacity for health systems and services research in Cuba, 2008-2011.

PubMed

Martínez, Nelcy

2012-07-01

Health systems and services research by nursing personnel could inform decision-making and nursing care, providing evidence concerning quality of and patient satisfaction. Such studies are rather uncommon in Cuban research institutes, where clinical research predominates. Assess the results of a strategy implemented between 2008 and 2011 to develop nursing capacity for health systems and services research in 14 national research institutes based in Havana. The study comprised four stages: description of approaches to health systems and services research by nurses worldwide and in Cuba; analysis of current capacities for such research in Cuba; intervention design and implementation; and evaluation. Various techniques were used including: literature review, bibliometric analysis, questionnaire survey, consultation with experts, focus groups, and workshops for participant orientation and design and followup of research projects. Qualitative information reduction and quantitative information summary methods were used. Initially, 32 nursing managers participated; a further 105 nurses from the institutes were involved in research teams formed during intervention implementation. Of all published nursing research articles retrieved, 8.9% (185 of 2081) concerned health systems and services research, of which 26.5% (49 of 185) dealt with quality assessment. At baseline, 75% of Cuban nurses surveyed had poor knowledge of health systems and services research. Orientation, design and followup workshops for all institute teams developed individual and institutional capacity for health systems and services research. Post-intervention, 84.7% (27) of nurses reached good knowledge and 14.3% (5) fair; institutional research teams were formed and maintained in 9 institutes, and 13 projects designed and implemented (11 institutional, 2 addressing ministerial-level priorities) to research nursing issues at selected centers. A systematic strategy to build nursing capacity for health systems and services research can be effective in involving nurses in such research and in developing institutional support for it, fostering compliance with Cuban and international professional development priorities for nursing, as well as contributing to quality of patient services.

Implementing and evaluating a professional practice framework in child and family health nursing: a pilot project.

PubMed

Guest, Eileen M; Keatinge, Diana R; Reed, Jennifer; Johnson, Karen R; Higgins, Helen M; Greig, Jennifer

2013-09-01

This paper describes the implementation and evaluation of the NSW Child and Family Health Nursing Professional Practice Framework in one health district in New South Wales, Australia. Child and family health nurses provide specialised, community based primary health care to families with children 0-5 years. A state wide professional practice framework was recently developed to support child and family health nurses. Online learning, clinical practice consultancies and skill assessments related to routine infant and child health surveillance were developed and implemented. Child and family health nurse reviewers gained competency in the various education and assessment components. Reviewers replicated this process in partnership with 21 child and family health nurses from two rural and one regional cluster. Evaluation questionnaires and focus groups were held with stakeholder groups. Participation provided nurses with affirmation of clinical practice and competency. Education and assessment processes were user friendly and particularly helpful for rural and remote nurses. Managers reported greater confidence in staff competence following project participation. Detailed planning and consultation is recommended before implementation of the Framework. Online learning, skills assessments and model of clinical practice consultancies were identified as central to ongoing orientation, education and professional development. Copyright © 2012 Elsevier Ltd. All rights reserved.

An object-oriented simulator for 3D digital breast tomosynthesis imaging system.

PubMed

Seyyedi, Saeed; Cengiz, Kubra; Kamasak, Mustafa; Yildirim, Isa

2013-01-01

Digital breast tomosynthesis (DBT) is an innovative imaging modality that provides 3D reconstructed images of breast to detect the breast cancer. Projections obtained with an X-ray source moving in a limited angle interval are used to reconstruct 3D image of breast. Several reconstruction algorithms are available for DBT imaging. Filtered back projection algorithm has traditionally been used to reconstruct images from projections. Iterative reconstruction algorithms such as algebraic reconstruction technique (ART) were later developed. Recently, compressed sensing based methods have been proposed in tomosynthesis imaging problem. We have developed an object-oriented simulator for 3D digital breast tomosynthesis (DBT) imaging system using C++ programming language. The simulator is capable of implementing different iterative and compressed sensing based reconstruction methods on 3D digital tomosynthesis data sets and phantom models. A user friendly graphical user interface (GUI) helps users to select and run the desired methods on the designed phantom models or real data sets. The simulator has been tested on a phantom study that simulates breast tomosynthesis imaging problem. Results obtained with various methods including algebraic reconstruction technique (ART) and total variation regularized reconstruction techniques (ART+TV) are presented. Reconstruction results of the methods are compared both visually and quantitatively by evaluating performances of the methods using mean structural similarity (MSSIM) values.

An Object-Oriented Simulator for 3D Digital Breast Tomosynthesis Imaging System

PubMed Central

Cengiz, Kubra

2013-01-01

Digital breast tomosynthesis (DBT) is an innovative imaging modality that provides 3D reconstructed images of breast to detect the breast cancer. Projections obtained with an X-ray source moving in a limited angle interval are used to reconstruct 3D image of breast. Several reconstruction algorithms are available for DBT imaging. Filtered back projection algorithm has traditionally been used to reconstruct images from projections. Iterative reconstruction algorithms such as algebraic reconstruction technique (ART) were later developed. Recently, compressed sensing based methods have been proposed in tomosynthesis imaging problem. We have developed an object-oriented simulator for 3D digital breast tomosynthesis (DBT) imaging system using C++ programming language. The simulator is capable of implementing different iterative and compressed sensing based reconstruction methods on 3D digital tomosynthesis data sets and phantom models. A user friendly graphical user interface (GUI) helps users to select and run the desired methods on the designed phantom models or real data sets. The simulator has been tested on a phantom study that simulates breast tomosynthesis imaging problem. Results obtained with various methods including algebraic reconstruction technique (ART) and total variation regularized reconstruction techniques (ART+TV) are presented. Reconstruction results of the methods are compared both visually and quantitatively by evaluating performances of the methods using mean structural similarity (MSSIM) values. PMID:24371468

Accelerated iterative beam angle selection in IMRT

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bangert, Mark, E-mail: m.bangert@dkfz.de; Unkelbach, Jan

2016-03-15

Purpose: Iterative methods for beam angle selection (BAS) for intensity-modulated radiation therapy (IMRT) planning sequentially construct a beneficial ensemble of beam directions. In a naïve implementation, the nth beam is selected by adding beam orientations one-by-one from a discrete set of candidates to an existing ensemble of (n − 1) beams. The best beam orientation is identified in a time consuming process by solving the fluence map optimization (FMO) problem for every candidate beam and selecting the beam that yields the largest improvement to the objective function value. This paper evaluates two alternative methods to accelerate iterative BAS based onmore » surrogates for the FMO objective function value. Methods: We suggest to select candidate beams not based on the FMO objective function value after convergence but (1) based on the objective function value after five FMO iterations of a gradient based algorithm and (2) based on a projected gradient of the FMO problem in the first iteration. The performance of the objective function surrogates is evaluated based on the resulting objective function values and dose statistics in a treatment planning study comprising three intracranial, three pancreas, and three prostate cases. Furthermore, iterative BAS is evaluated for an application in which a small number of noncoplanar beams complement a set of coplanar beam orientations. This scenario is of practical interest as noncoplanar setups may require additional attention of the treatment personnel for every couch rotation. Results: Iterative BAS relying on objective function surrogates yields similar results compared to naïve BAS with regard to the objective function values and dose statistics. At the same time, early stopping of the FMO and using the projected gradient during the first iteration enable reductions in computation time by approximately one to two orders of magnitude. With regard to the clinical delivery of noncoplanar IMRT treatments, we could show that optimized beam ensembles using only a few noncoplanar beam orientations often approach the plan quality of fully noncoplanar ensembles. Conclusions: We conclude that iterative BAS in combination with objective function surrogates can be a viable option to implement automated BAS at clinically acceptable computation times.« less

Accelerated iterative beam angle selection in IMRT.

PubMed

Bangert, Mark; Unkelbach, Jan

2016-03-01

Iterative methods for beam angle selection (BAS) for intensity-modulated radiation therapy (IMRT) planning sequentially construct a beneficial ensemble of beam directions. In a naïve implementation, the nth beam is selected by adding beam orientations one-by-one from a discrete set of candidates to an existing ensemble of (n - 1) beams. The best beam orientation is identified in a time consuming process by solving the fluence map optimization (FMO) problem for every candidate beam and selecting the beam that yields the largest improvement to the objective function value. This paper evaluates two alternative methods to accelerate iterative BAS based on surrogates for the FMO objective function value. We suggest to select candidate beams not based on the FMO objective function value after convergence but (1) based on the objective function value after five FMO iterations of a gradient based algorithm and (2) based on a projected gradient of the FMO problem in the first iteration. The performance of the objective function surrogates is evaluated based on the resulting objective function values and dose statistics in a treatment planning study comprising three intracranial, three pancreas, and three prostate cases. Furthermore, iterative BAS is evaluated for an application in which a small number of noncoplanar beams complement a set of coplanar beam orientations. This scenario is of practical interest as noncoplanar setups may require additional attention of the treatment personnel for every couch rotation. Iterative BAS relying on objective function surrogates yields similar results compared to naïve BAS with regard to the objective function values and dose statistics. At the same time, early stopping of the FMO and using the projected gradient during the first iteration enable reductions in computation time by approximately one to two orders of magnitude. With regard to the clinical delivery of noncoplanar IMRT treatments, we could show that optimized beam ensembles using only a few noncoplanar beam orientations often approach the plan quality of fully noncoplanar ensembles. We conclude that iterative BAS in combination with objective function surrogates can be a viable option to implement automated BAS at clinically acceptable computation times.

Project Management, Critical Praxis, and Process-Oriented Approach to Teamwork

ERIC Educational Resources Information Center

Ding, Huiling; Ding, Xin

2008-01-01

To help alleviate issues of free-riding and conflicts in team projects, this study proposes the systematic incorporation of project management methods to introduce a process-oriented approach to and a critical praxis in team projects. We examined how the systematic use of project management methods influenced students' performance in team…

OR.NET: a service-oriented architecture for safe and dynamic medical device interoperability.

PubMed

Kasparick, Martin; Schmitz, Malte; Andersen, Björn; Rockstroh, Max; Franke, Stefan; Schlichting, Stefan; Golatowski, Frank; Timmermann, Dirk

2018-02-23

Modern surgical departments are characterized by a high degree of automation supporting complex procedures. It recently became apparent that integrated operating rooms can improve the quality of care, simplify clinical workflows, and mitigate equipment-related incidents and human errors. Particularly using computer assistance based on data from integrated surgical devices is a promising opportunity. However, the lack of manufacturer-independent interoperability often prevents the deployment of collaborative assistive systems. The German flagship project OR.NET has therefore developed, implemented, validated, and standardized concepts for open medical device interoperability. This paper describes the universal OR.NET interoperability concept enabling a safe and dynamic manufacturer-independent interconnection of point-of-care (PoC) medical devices in the operating room and the whole clinic. It is based on a protocol specifically addressing the requirements of device-to-device communication, yet also provides solutions for connecting the clinical information technology (IT) infrastructure. We present the concept of a service-oriented medical device architecture (SOMDA) as well as an introduction to the technical specification implementing the SOMDA paradigm, currently being standardized within the IEEE 11073 service-oriented device connectivity (SDC) series. In addition, the Session concept is introduced as a key enabler for safe device interconnection in highly dynamic ensembles of networked medical devices; and finally, some security aspects of a SOMDA are discussed.

Family bedside orientations: An innovative peer support model to enhance a culture of family-centred care at the Stollery Children's Hospital.

PubMed

Wodinski, Lindsay M; Mattson McCrady, Heather M; Oswald, Christie M; Lyste, Nicole J M; Forbes, Karen L L

2017-10-01

This paper presents family bedside orientations, an innovative bedside peer support model for families of paediatric patients piloted in one unit at the Stollery Children's Hospital in Edmonton, Alberta. The model invites family members of former patients back to the hospital as volunteer peer mentors responsible for meeting one-on-one with current inpatient families to provide a listening presence, discuss patient safety practices and encourage families to participate in their child's care. Using qualitative and quantitative data collection methods, the model was evaluated over 1 year (December 2014 to December 2015). Data sources included peer mentor field notes (from 163 visits) detailing the number of family bedside orientations completed by peer mentors and how they interacted with families, as well as post-visit family (n=35) surveys, Hospital-Child Inpatient Experience Survey data, peer mentor (n=6) questionnaires, focus groups with unit staff (n=10) and interviews with members of the project leadership team (n=5). Our findings indicated that family bedside orientations became an established practice in the pilot unit and positively impacted family care experiences. We attribute these successes to championing and support from unit staff and our multidisciplinary project leadership team. We discuss how our team addressed family privacy and confidentiality while introducing peer mentors in the unit. We also highlight strategies used to integrate peer mentors as part of the staff team and enhance peer support culture in the pilot unit. Practical considerations for implementing this model in other paediatric environments are provided.

SANDS: A Service-Oriented Architecture for Clinical Decision Support in a National Health Information Network

PubMed Central

Wright, Adam; Sittig, Dean F.

2008-01-01

In this paper we describe and evaluate a new distributed architecture for clinical decision support called SANDS (Service-oriented Architecture for NHIN Decision Support), which leverages current health information exchange efforts and is based on the principles of a service-oriented architecture. The architecture allows disparate clinical information systems and clinical decision support systems to be seamlessly integrated over a network according to a set of interfaces and protocols described in this paper. The architecture described is fully defined and developed, and six use cases have been developed and tested using a prototype electronic health record which links to one of the existing prototype National Health Information Networks (NHIN): drug interaction checking, syndromic surveillance, diagnostic decision support, inappropriate prescribing in older adults, information at the point of care and a simple personal health record. Some of these use cases utilize existing decision support systems, which are either commercially or freely available at present, and developed outside of the SANDS project, while other use cases are based on decision support systems developed specifically for the project. Open source code for many of these components is available, and an open source reference parser is also available for comparison and testing of other clinical information systems and clinical decision support systems that wish to implement the SANDS architecture. PMID:18434256

COMPLEAT (Community-Oriented Model for Planning Least-Cost Energy Alternatives and Technologies): A planning tool for publicly owned electric utilities. [Community-Oriented Model for Planning Least-Cost Energy Alternatives and Technologies (Compleat)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1990-09-01

COMPLEAT takes its name, as an acronym, from Community-Oriented Model for Planning Least-Cost Energy Alternatives and Technologies. It is an electric utility planning model designed for use principally by publicly owned electric utilities and agencies serving such utilities. As a model, COMPLEAT is significantly more full-featured and complex than called out in APPA's original plan and proposal to DOE. The additional complexity grew out of a series of discussions early in the development schedule, in which it became clear to APPA staff and advisors that the simplicity characterizing the original plan, while highly desirable in terms of utility applications, wasmore » not achievable if practical utility problems were to be addressed. The project teams settled on Energy 20/20, an existing model developed by Dr. George Backus of Policy Assessment Associates, as the best candidate for the kinds of modifications and extensions that would be required. The remainder of the project effort was devoted to designing specific input data files, output files, and user screens and to writing and testing the compute programs that would properly implement the desired features around Energy 20/20 as a core program. This report presents in outline form, the features and user interface of COMPLEAT.« less

Service Providers’ Experiences and Perspectives on Recovery-Oriented Mental Health System Reform

PubMed Central

Piat, Myra; Lal, Shalini

2016-01-01

Objective With the use of a qualitative approach, this study focuses on service providers’ experiences and perspectives on recovery-oriented reform. Methods Nine focus groups were conducted with a sample of 68 service providers recruited from three Canadian sites. Results Three major themes were identified: 1) positive attitudes towards recovery-oriented reform; 2) skepticism towards recovery-oriented reform; and 3) challenges associated with implementing recovery-oriented practice. These challenges pertained to conceptual uncertainty and consistency around the meanings of recovery; application of recovery-oriented practice with certain populations and in certain contexts; bureaucratization of recovery-oriented tools; limited leadership support; and, societal stigma and social exclusion of persons with mental illnesses. Conclusions and Implications for Practice The findings point towards challenges that might arise as system planners move ahead in their efforts toward implementing recovery within the mental health system. In this regard, we offer several recommendations for the planning of organizational and educational practices that support the implementation of recovery-oriented practice. PMID:22491368

Linking mathematics with engineering applications at an early stage - implementation, experimental set-up and evaluation of a pilot project

NASA Astrophysics Data System (ADS)

Rooch, Aeneas; Junker, Philipp; Härterich, Jörg; Hackl, Klaus

2016-03-01

Too difficult, too abstract, too theoretical - many first-year engineering students complain about their mathematics courses. The project MathePraxis aims to resolve this disaffection. It links mathematical methods as they are taught in the first semesters with practical problems from engineering applications - and thereby shall give first-year engineering students a vivid and convincing impression of where they will need mathematics in their later working life. But since real applications usually require more than basic mathematics and first-year engineering students typically are not experienced with construction, mensuration and the use of engineering software, such an approach is hard to realise. In this article, we show that it is possible. We report on the implementation of MathePraxis at Ruhr-Universität Bochum. We describe the set-up and the implementation of a course on designing a mass damper which combines basic mathematical techniques with an impressive experiment. In an accompanying evaluation, we have examined the students' motivation relating to mathematics. This opens up new perspectives how to address the need for a more practically oriented mathematical education in engineering sciences.

Barriers to adopting and implementing local-level tobacco control policies.

PubMed

Satterlund, Travis D; Cassady, Diana; Treiber, Jeanette; Lemp, Cathy

2011-08-01

Although California communities have been relatively successful in adopting and implementing a wide range of local tobacco control policies, the process has not been without its setbacks and barriers. Little is known about local policy adoption, and this paper examines these processes related to adopting and implementing outdoor smoke-free policies, focusing on the major barriers faced by local-level tobacco control organizations in this process. Ninety-six projects funded by the California Tobacco Control Program submitted final evaluation reports pertaining to an outdoor smoking objective, and the reports from these projects were analyzed. The barriers were grouped in three primary areas: politically polarizing barriers, organizational barriers, and local political orientation. The barriers identified in this study underscore the need for an organized action plan in adopting local tobacco policy. The authors also suggest potential strategies to offset the barriers, including: (1) having a "champion" who helps to carry an objective forward; (2) tapping into a pool of youth volunteers; (3) collecting and using local data as a persuasive tool; (4) educating the community in smoke-free policy efforts; (5) working strategically within the local political climate; and (6) demonstrating to policymakers the constituent support for proposed policy.

Towards a single seismological service infrastructure in Europe

NASA Astrophysics Data System (ADS)

Spinuso, A.; Trani, L.; Frobert, L.; Van Eck, T.

2012-04-01

In the last five year services and data providers, within the seismological community in Europe, focused their efforts in migrating the way of opening their archives towards a Service Oriented Architecture (SOA). This process tries to follow pragmatically the technological trends and available solutions aiming at effectively improving all the data stewardship activities. These advancements are possible thanks to the cooperation and the follow-ups of several EC infrastructural projects that, by looking at general purpose techniques, combine their developments envisioning a multidisciplinary platform for the earth observation as the final common objective (EPOS, Earth Plate Observation System) One of the first results of this effort is the Earthquake Data Portal (http://www.seismicportal.eu), which provides a collection of tools to discover, visualize and access a variety of seismological data sets like seismic waveform, accelerometric data, earthquake catalogs and parameters. The Portal offers a cohesive distributed search environment, linking data search and access across multiple data providers through interactive web-services, map-based tools and diverse command-line clients. Our work continues under other EU FP7 projects. Here we will address initiatives in two of those projects. The NERA, (Network of European Research Infrastructures for Earthquake Risk Assessment and Mitigation) project will implement a Common Services Architecture based on OGC services APIs, in order to provide Resource-Oriented common interfaces across the data access and processing services. This will improve interoperability between tools and across projects, enabling the development of higher-level applications that can uniformly access the data and processing services of all participants. This effort will be conducted jointly with the VERCE project (Virtual Earthquake and Seismology Research Community for Europe). VERCE aims to enable seismologists to exploit the wealth of seismic data within a data-intensive computation framework, which will be tailored to the specific needs of the community. It will provide a new interoperable infrastructure, as the computational backbone laying behind the publicly available interfaces. VERCE will have to face the challenges of implementing a service oriented architecture providing an efficient layer between the Data and the Grid infrastructures, coupling HPC data analysis and HPC data modeling applications through the execution of workflows and data sharing mechanism. Online registries of interoperable worklflow components, storage of intermediate results and data provenance are those aspects that are currently under investigations to make the VERCE facilities usable from a large scale of users, data and service providers. For such purposes the adoption of a Digital Object Architecture, to create online catalogs referencing and describing semantically all these distributed resources, such as datasets, computational processes and derivative products, is seen as one of the viable solution to monitor and steer the usage of the infrastructure, increasing its efficiency and the cooperation among the community.

An Object-Oriented Collection of Minimum Degree Algorithms: Design, Implementation, and Experiences

NASA Technical Reports Server (NTRS)

Kumfert, Gary; Pothen, Alex

1999-01-01

The multiple minimum degree (MMD) algorithm and its variants have enjoyed 20+ years of research and progress in generating fill-reducing orderings for sparse, symmetric positive definite matrices. Although conceptually simple, efficient implementations of these algorithms are deceptively complex and highly specialized. In this case study, we present an object-oriented library that implements several recent minimum degree-like algorithms. We discuss how object-oriented design forces us to decompose these algorithms in a different manner than earlier codes and demonstrate how this impacts the flexibility and efficiency of our C++ implementation. We compare the performance of our code against other implementations in C or Fortran.

Object Oriented Programming Systems (OOPS) and frame representations: An investigation of programming paradigms

NASA Technical Reports Server (NTRS)

Auty, David

1988-01-01

The project was initiated to research Object Oriented Programming Systems (OOPS) and frame representation systems, their significance and applicability, and their implementation in or relationship to Ada. Object orientated is currently a very popular conceptual adjective. Object oriented programming, in particular, is promoted as a particularly productive approach to programming; an approach which maximizes opportunities for code reuse and lends itself to the definition of convenient and well-developed units. Such units are thus expected to be usable in a variety of situations, beyond the typical highly specific unit development of other approaches. Frame represenation systems share a common heritage and similar conceptual foundations. Together they represent a quickly emerging alternative approach to programming. The approach is to first define the terms, starting with relevant concepts and using these to put bounds on what is meant by OOPS and Frames. From this the possibilities were pursued to merge OOPS with Ada which will further elucidate the significant characteristics which make up this programming approach. Finally, some of the merits and demerits of OOPS were briefly considered as a way of addressing the applicability of OOPS to various programming tasks.

Laser-Induced-Fluorescence Photogrammetry and Videogrammetry

NASA Technical Reports Server (NTRS)

Danehy, Paul; Jones, Tom; Connell, John; Belvin, Keith; Watson, Kent

2004-01-01

An improved method of dot-projection photogrammetry and an extension of the method to encompass dot-projection videogrammetry overcome some deficiencies of dot-projection photogrammetry as previously practiced. The improved method makes it possible to perform dot-projection photogrammetry or videogrammetry on targets that have previously not been amenable to dot-projection photogrammetry because they do not scatter enough light. Such targets include ones that are transparent, specularly reflective, or dark. In standard dot-projection photogrammetry, multiple beams of white light are projected onto the surface of an object of interest (denoted the target) to form a known pattern of bright dots. The illuminated surface is imaged in one or more cameras oriented at a nonzero angle or angles with respect to a central axis of the illuminating beams. The locations of the dots in the image(s) contain stereoscopic information on the locations of the dots, and, hence, on the location, shape, and orientation of the illuminated surface of the target. The images are digitized and processed to extract this information. Hardware and software to implement standard dot-projection photogrammetry are commercially available. Success in dot-projection photogrammetry depends on achieving sufficient signal-to-noise ratios: that is, it depends on scattering of enough light by the target so that the dots as imaged in the camera(s) stand out clearly against the ambient-illumination component of the image of the target. In one technique used previously to increase the signal-to-noise ratio, the target is illuminated by intense, pulsed laser light and the light entering the camera(s) is band-pass filtered at the laser wavelength. Unfortunately, speckle caused by the coherence of the laser light engenders apparent movement in the projected dots, thereby giving rise to errors in the measurement of the centroids of the dots and corresponding errors in the computed shape and location of the surface of the target. The improved method is denoted laser-induced-fluorescence photogrammetry.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mohamed Abdelrahman; roger Haggard; Wagdy Mahmoud

The final goal of this project was the development of a system that is capable of controlling an industrial process effectively through the integration of information obtained through intelligent sensor fusion and intelligent control technologies. The industry of interest in this project was the metal casting industry as represented by cupola iron-melting furnaces. However, the developed technology is of generic type and hence applicable to several other industries. The system was divided into the following four major interacting components: 1. An object oriented generic architecture to integrate the developed software and hardware components @. Generic algorithms for intelligent signal analysismore » and sensor and model fusion 3. Development of supervisory structure for integration of intelligent sensor fusion data into the controller 4. Hardware implementation of intelligent signal analysis and fusion algorithms« less

Second order tensor finite element

NASA Technical Reports Server (NTRS)

Oden, J. Tinsley; Fly, J.; Berry, C.; Tworzydlo, W.; Vadaketh, S.; Bass, J.

1990-01-01

The results of a research and software development effort are presented for the finite element modeling of the static and dynamic behavior of anisotropic materials, with emphasis on single crystal alloys. Various versions of two dimensional and three dimensional hybrid finite elements were implemented and compared with displacement-based elements. Both static and dynamic cases are considered. The hybrid elements developed in the project were incorporated into the SPAR finite element code. In an extension of the first phase of the project, optimization of experimental tests for anisotropic materials was addressed. In particular, the problem of calculating material properties from tensile tests and of calculating stresses from strain measurements were considered. For both cases, numerical procedures and software for the optimization of strain gauge and material axes orientation were developed.

Mental Preparation and Evaluation: A Sportpsychological Project with the Swiss Orienteering National Team.

ERIC Educational Resources Information Center

Venzl, Reto

1994-01-01

Lists the training themes and levels of intervention of a psychological orienteering project for Swiss athletes. Presents an outline for preparation and evaluation of team or individual performance over time on technical, physical, mental, and environmental aspects of orienteering. (SV)

AztecOO user guide.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Heroux, Michael Allen

2004-07-01

The Trilinos{trademark} Project is an effort to facilitate the design, development, integration and ongoing support of mathematical software libraries. AztecOO{trademark} is a package within Trilinos that enables the use of the Aztec solver library [19] with Epetra{trademark} [13] objects. AztecOO provides access to Aztec preconditioners and solvers by implementing the Aztec 'matrix-free' interface using Epetra. While Aztec is written in C and procedure-oriented, AztecOO is written in C++ and is object-oriented. In addition to providing access to Aztec capabilities, AztecOO also provides some signficant new functionality. In particular it provides an extensible status testing capability that allows expression of sophisticatedmore » stopping criteria as is needed in production use of iterative solvers. AztecOO also provides mechanisms for using Ifpack [2], ML [20] and AztecOO itself as preconditioners.« less

Practical experience with graphical user interfaces and object-oriented design in the clinical laboratory.

PubMed

Wells, I G; Cartwright, R Y; Farnan, L P

1993-12-15

The computing strategy in our laboratories evolved from research in Artificial Intelligence, and is based on powerful software tools running on high performance desktop computers with a graphical user interface. This allows most tasks to be regarded as design problems rather than implementation projects, and both rapid prototyping and an object-oriented approach to be employed during the in-house development and enhancement of the laboratory information systems. The practical application of this strategy is discussed, with particular reference to the system designer, the laboratory user and the laboratory customer. Routine operation covers five departments, and the systems are stable, flexible and well accepted by the users. Client-server computing, currently undergoing final trials, is seen as the key to further development, and this approach to Pathology computing has considerable potential for the future.

An object oriented fully 3D tomography visual toolkit.

PubMed

Agostinelli, S; Paoli, G

2001-04-01

In this paper we present a modern object oriented component object model (COMM) C + + toolkit dedicated to fully 3D cone-beam tomography. The toolkit allows the display and visual manipulation of analytical phantoms, projection sets and volumetric data through a standard Windows graphical user interface. Data input/output is performed using proprietary file formats but import/export of industry standard file formats, including raw binary, Windows bitmap and AVI, ACR/NEMA DICOMM 3 and NCSA HDF is available. At the time of writing built-in implemented data manipulators include a basic phantom ray-tracer and a Matrox Genesis frame grabbing facility. A COMM plug-in interface is provided for user-defined custom backprojector algorithms: a simple Feldkamp ActiveX control, including source code, is provided as an example; our fast Feldkamp plug-in is also available.

GANDALF - Graphical Astrophysics code for N-body Dynamics And Lagrangian Fluids

NASA Astrophysics Data System (ADS)

Hubber, D. A.; Rosotti, G. P.; Booth, R. A.

2018-01-01

GANDALF is a new hydrodynamics and N-body dynamics code designed for investigating planet formation, star formation and star cluster problems. GANDALF is written in C++, parallelized with both OPENMP and MPI and contains a PYTHON library for analysis and visualization. The code has been written with a fully object-oriented approach to easily allow user-defined implementations of physics modules or other algorithms. The code currently contains implementations of smoothed particle hydrodynamics, meshless finite-volume and collisional N-body schemes, but can easily be adapted to include additional particle schemes. We present in this paper the details of its implementation, results from the test suite, serial and parallel performance results and discuss the planned future development. The code is freely available as an open source project on the code-hosting website github at https://github.com/gandalfcode/gandalf and is available under the GPLv2 license.

Yahoo! Compute Coop (YCC). A Next-Generation Passive Cooling Design for Data Centers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Robison, AD; Page, Christina; Lytle, Bob

The purpose of the Yahoo! Compute Coop (YCC) project is to research, design, build and implement a greenfield "efficient data factory" and to specifically demonstrate that the YCC concept is feasible for large facilities housing tens of thousands of heat-producing computing servers. The project scope for the Yahoo! Compute Coop technology includes: - Analyzing and implementing ways in which to drastically decrease energy consumption and waste output. - Analyzing the laws of thermodynamics and implementing naturally occurring environmental effects in order to maximize the "free-cooling" for large data center facilities. "Free cooling" is the direct usage of outside air tomore » cool the servers vs. traditional "mechanical cooling" which is supplied by chillers or other Dx units. - Redesigning and simplifying building materials and methods. - Shortening and simplifying build-to-operate schedules while at the same time reducing initial build and operating costs. Selected for its favorable climate, the greenfield project site is located in Lockport, NY. Construction on the 9.0 MW critical load data center facility began in May 2009, with the fully operational facility deployed in September 2010. The relatively low initial build cost, compatibility with current server and network models, and the efficient use of power and water are all key features that make it a highly compatible and globally implementable design innovation for the data center industry. Yahoo! Compute Coop technology is designed to achieve 99.98% uptime availability. This integrated building design allows for free cooling 99% of the year via the building's unique shape and orientation, as well as server physical configuration.« less

The paradox of managing a project-oriented matrix: establishing coherence within chaos.

PubMed

Greiner, L E; Schein, V E

1981-01-01

Projects that require the flexible coordination of multidisciplinary teams have tended to adopt a matrix structure to accomplish complex tasks. Yet these project-oriented matrix structures themselves require careful coordination if they are to realize the objectives set for them. The authors identify the basic organizational questions that project-oriented matrix organizations must face. They examine the relationship between responsibility and authority; the tradeoffs between economic efficiency and the technical quality of the work produced; and the sensitive issues of managing individualistic, highly trained professionals while also maintaining group cohesiveness.

Development and implementation of Models of Care for musculoskeletal conditions in middle-income and low-income Asian countries.

PubMed

Lim, Keith K; Chan, Madelynn; Navarra, Sandra; Haq, Syed Atiqul; Lau, Chak Sing

2016-06-01

This chapter discusses the challenges faced in the development and implementation of musculoskeletal (MSK) Models of Care (MoCs) in middle-income and low-income countries in Asia and outlines the components of an effective MoC for MSK conditions. Case studies of four such countries (The Philippines, Malaysia, Bangladesh and Myanmar) are presented, and their unique implementation issues are discussed. The success experienced in one high-income country (Singapore) is also described as a comparison. The Community Oriented Program for Control of Rheumatic Diseases (COPCORD) project and the role of Asia Pacific League of Associations for Rheumatology (APLAR), a professional body supporting MoC initiatives in this region, are also discussed. The experience and lessons learned from these case studies can provide useful information to guide the implementation of future MSK MoC initiatives in other middle-income and low-income countries. Copyright © 2016 Elsevier Ltd. All rights reserved.

Cultivation of students' engineering designing ability based on optoelectronic system course project

NASA Astrophysics Data System (ADS)

Cao, Danhua; Wu, Yubin; Li, Jingping

2017-08-01

We carry out teaching based on optoelectronic related course group, aiming at junior students majored in Optoelectronic Information Science and Engineering. " Optoelectronic System Course Project " is product-designing-oriented and lasts for a whole semester. It provides a chance for students to experience the whole process of product designing, and improve their abilities to search literature, proof schemes, design and implement their schemes. In teaching process, each project topic is carefully selected and repeatedly refined to guarantee the projects with the knowledge integrity, engineering meanings and enjoyment. Moreover, we set up a top team with professional and experienced teachers, and build up learning community. Meanwhile, the communication between students and teachers as well as the interaction among students are taken seriously in order to improve their team-work ability and communicational skills. Therefore, students are not only able to have a chance to review the knowledge hierarchy of optics, electronics, and computer sciences, but also are able to improve their engineering mindset and innovation consciousness.

2D and 3D X-ray phase retrieval of multi-material objects using a single defocus distance.

PubMed

Beltran, M A; Paganin, D M; Uesugi, K; Kitchen, M J

2010-03-29

A method of tomographic phase retrieval is developed for multi-material objects whose components each has a distinct complex refractive index. The phase-retrieval algorithm, based on the Transport-of-Intensity equation, utilizes propagation-based X-ray phase contrast images acquired at a single defocus distance for each tomographic projection. The method requires a priori knowledge of the complex refractive index for each material present in the sample, together with the total projected thickness of the object at each orientation. The requirement of only a single defocus distance per projection simplifies the experimental setup and imposes no additional dose compared to conventional tomography. The algorithm was implemented using phase contrast data acquired at the SPring-8 Synchrotron facility in Japan. The three-dimensional (3D) complex refractive index distribution of a multi-material test object was quantitatively reconstructed using a single X-ray phase-contrast image per projection. The technique is robust in the presence of noise, compared to conventional absorption based tomography.

A qualitative study on the ethics of transforming care: examining the development and implementation of Canada's first mental health strategy.

PubMed

Park, Melissa M; Lencucha, Raphael; Mattingly, Cheryl; Zafran, Hiba; Kirmayer, Laurence J

2015-08-19

The Mental Health Commission of Canada worked collaboratively with stakeholders to create a new framework for a federal mental health strategy, which is now mandated for implementation by 2017. The proposed strategies have been written into provincial health plans, hospital accreditation standards, and the annual objectives of psychiatric departments and community organizations. This project will explore the decision-making process among those who contributed to Canada's first federal mental health policy and those implementing this policy in the clinical setting. Despite the centrality of ethical reasoning to the successful uptake of the recent national guidelines for recovery-oriented care, to date, there are no studies focused exclusively on the ethical tensions that emerged and continue to emerge during the creation and implementation of the new standards for recovery-oriented practice. This two-year Canadian Institute of Health Research Catalyst Grant in Ethics (2015-2017) consists of three components. C-I, a retrospective, qualitative study consisting of document analysis and interviews with key policy-makers of the ethical tensions that arose during the development of Canada's Mental Health Strategy will be conducted in parallel to C-II, a theory-based, focused ethnography of how mental health practitioners in a psychiatric setting reason about and act upon new standards in everyday practice. Case-based scenarios of ethical tensions will be developed from C-I/II and fed-forward to C-III: participatory forums with policy-makers, mental health practitioners, and other stakeholders in recovery-oriented services to collectively identify and prioritize key ethical concerns and generate action steps to close the gap between the policy-making process and its implementation at the local level. Policy-makers and clinicians make important everyday decisions that effect the creation and implementation of new practice standards. Particularly, there is a need to understand how ethical dilemmas that arise during this decision-making process and the reasoning and resources they use to resolve these tensions impact on the implementation process. This catalyst grant in ethics will (1) introduce a novel line of inquiry focusing on the ethical tensions that arose in the development of Canada's first mental health strategy, while (2) intensifying our focus on the ethical aspects of moving policy into action.

[Legal Analysis of the Implementation Rules of Delegation of Home Visits by Family Doctors to Non-Physician Health Professionals: Is the Implementation in Accordance with the Intention of the Law?

PubMed

Ruppel, T; van den Berg, N; Hoffmann, W

2016-10-01

Objective: Triggered by the AGnES model project of the University Medicine Greifswald, the Code of Social Law V was changed by the German Lower and Upper House of Parliament (Bundestag and Bundesrat) in 2008 so that the delegation of GP's activities to non-physician colleagues was allowed under highly restricted preconditions. Delegated home visits should become an integral part of the standard care in Germany. In this study, the implementation of § 87 para 2b clause 5 SGB V, established in Annex 8 of the Federal Collective Agreement, was checked for its legality in terms of qualification. Methods: The problem was checked with the legal methods of interpretation in pursuance of the norm and the methods of systematic, historic and teleologic interpretation. Results: Even though the Parliament clearly required orientation to the AGnES model project (in order to assure safety and effective care of delegated home visits), self-management in the implementation of the law remained far behind these guidelines. The main outcome of the legal analysis was that the implementation arrangements of the Code of Social Law V are predominantly illegal. Conclusions: The parties of the Federal Collective Agreement have to change the arrangements to meet the requirements of the Parliament and to avoid risks of liability for delegating GPs. © Georg Thieme Verlag KG Stuttgart · New York.

Computational Science in Armenia (Invited Talk)

NASA Astrophysics Data System (ADS)

Marandjian, H.; Shoukourian, Yu.

This survey is devoted to the development of informatics and computer science in Armenia. The results in theoretical computer science (algebraic models, solutions to systems of general form recursive equations, the methods of coding theory, pattern recognition and image processing), constitute the theoretical basis for developing problem-solving-oriented environments. As examples can be mentioned: a synthesizer of optimized distributed recursive programs, software tools for cluster-oriented implementations of two-dimensional cellular automata, a grid-aware web interface with advanced service trading for linear algebra calculations. In the direction of solving scientific problems that require high-performance computing resources, examples of completed projects include the field of physics (parallel computing of complex quantum systems), astrophysics (Armenian virtual laboratory), biology (molecular dynamics study of human red blood cell membrane), meteorology (implementing and evaluating the Weather Research and Forecast Model for the territory of Armenia). The overview also notes that the Institute for Informatics and Automation Problems of the National Academy of Sciences of Armenia has established a scientific and educational infrastructure, uniting computing clusters of scientific and educational institutions of the country and provides the scientific community with access to local and international computational resources, that is a strong support for computational science in Armenia.

Terra-Preta-Technology as an innovative system component to create circulation oriented, sustainable land use systems

NASA Astrophysics Data System (ADS)

Dotterweich, M.; Böttcher, J.; Krieger, A.

2012-04-01

This paper presents current research and application projects on innovative system solutions which are based on the implementation of a regional resource efficient material flow management as well as utilising "Terra-Preta-Technology" as an innovative system component. Terra Preta Substrate (TPS) is a recently developed substance composed of liquid and solid organic matter, including biochar, altered by acid-lactic fermentation. Based on their properties, positive effects on water and nutrient retention, soil microbiological activity, and cation-exchange capacity are expected and currently investigated by different projects. TPS further sequesters carbon and decreases NO2 emissions from fertilized soils as observed by the use of biochar. The production of TPS is based on a circulation oriented organic waste management system directly adapted to the local available inputs and desired soil amendment properties. The production of TPS is possible with simple box systems for subsistence farming but also on a much larger scale as modular industrial plants for farmers or commercial and municipal waste management companies in sizes from 500 and 50,000 m3. The Terra-Preta-Technology enhances solutions to soil conservation, soil amelioration, humic formation, reduced water consumption, long term carbon sequestration, nutrient retention, containment binding, and to biodiversity on local to a regional scale. The projects also involve research of ancient land management systems to enhance resource efficiency by means of an integrative and transdisciplinary approach.

GEM detector development for tokamak plasma radiation diagnostics: SXR poloidal tomography

NASA Astrophysics Data System (ADS)

Chernyshova, Maryna; Malinowski, Karol; Ziółkowski, Adam; Kowalska-Strzeciwilk, Ewa; Czarski, Tomasz; Poźniak, Krzysztof T.; Kasprowicz, Grzegorz; Zabołotny, Wojciech; Wojeński, Andrzej; Kolasiński, Piotr; Krawczyk, Rafał D.

2015-09-01

An increased attention to tungsten material is related to a fact that it became a main candidate for the plasma facing material in ITER and future fusion reactor. The proposed work refers to the studies of W influence on the plasma performances by developing new detectors based on Gas Electron Multiplier GEM) technology for tomographic studies of tungsten transport in ITER-oriented tokamaks, e.g. WEST project. It presents current stage of design and developing of cylindrically bent SXR GEM detector construction for horizontal port implementation. Concept to overcome an influence of constraints on vertical port has been also presented. It is expected that the detecting unit under development, when implemented, will add to the safe operation of tokamak bringing creation of sustainable nuclear fusion reactors a step closer.

Establishing a `Centre for Engineering Experimentation and Design Simulation': a step towards restructuring engineering education in India

NASA Astrophysics Data System (ADS)

Venkateswarlu, P.

2017-07-01

Reforms in undergraduate engineering curriculum to produce engineers with entrepreneurial skills should address real-world problems relevant to industry and society with active industry support. Technology-assisted, hands-on projects involving experimentation, design simulation and prototyping will transform graduates into professionals with necessary skills to create and advance knowledge that meets global standards. To achieve this goal, this paper proposes establishing a central facility, 'Centre for Engineering Experimentation and Design Simulation' (CEEDS) in autonomous engineering colleges in India. The centre will be equipped with the most recent technology resources and computational facilities where students execute novel interdisciplinary product-oriented projects benefiting both industry and society. Students undertake two projects: a short-term project aimed at an engineering solution to a problem in energy, health and environment and the other a major industry-supported project devoted to a product that enhances innovation and creativity. The paper presents the current status, the theoretical and pedagogical foundation for the centre's relevance, an activity plan and its implementation in the centre for product-based learning with illustrative examples.

Architectural approaches for HL7-based health information systems implementation.

PubMed

López, D M; Blobel, B

2010-01-01

Information systems integration is hard, especially when semantic and business process interoperability requirements need to be met. To succeed, a unified methodology, approaching different aspects of systems architecture such as business, information, computational, engineering and technology viewpoints, has to be considered. The paper contributes with an analysis and demonstration on how the HL7 standard set can support health information systems integration. Based on the Health Information Systems Development Framework (HIS-DF), common architectural models for HIS integration are analyzed. The framework is a standard-based, consistent, comprehensive, customizable, scalable methodology that supports the design of semantically interoperable health information systems and components. Three main architectural models for system integration are analyzed: the point to point interface, the messages server and the mediator models. Point to point interface and messages server models are completely supported by traditional HL7 version 2 and version 3 messaging. The HL7 v3 standard specification, combined with service-oriented, model-driven approaches provided by HIS-DF, makes the mediator model possible. The different integration scenarios are illustrated by describing a proof-of-concept implementation of an integrated public health surveillance system based on Enterprise Java Beans technology. Selecting the appropriate integration architecture is a fundamental issue of any software development project. HIS-DF provides a unique methodological approach guiding the development of healthcare integration projects. The mediator model - offered by the HIS-DF and supported in HL7 v3 artifacts - is the more promising one promoting the development of open, reusable, flexible, semantically interoperable, platform-independent, service-oriented and standard-based health information systems.

Modern astronomical knowledge as component of general education for sustainable development

NASA Astrophysics Data System (ADS)

Nurgaliev, I.

{It is shown that 1) astronomical knowledge was a foundation of emerging modern physics and natural sciences based on mathematics, 2) mathematical basis of the natural sciences serves as an orientation of progress in the true objective of social sciences. The last example for this chain of impacts is the discovery of the fundamental demographic equation (N=aN^2-bN) full of the astronomical analogy [9]. Modern age endorses new imperatives on education. Reckless exploitation of the natural resources will cause irreversible exhaustion of the agro- and bio-potential of the planet during lifetime of a few generations. The adequate respond to the challenge lies in modern technologies and educating responsible (socially oriented) professionals. That is why the importance of teaching modern technologies along with providing the students with the understanding of global long term consequences of the human industrial activities is growing. The course ``Theoretical Foundations of Modern Technologies" at the Moscow State Agricultural University (Timiryazev Academy) taught by the author is discussed. New experimental project ``Space Technologies, Ecology and Safe Energetics in School of the Future" is presented as a project of a new age in the process of implementing at the Moscow city secondary schools by the colleagues and by the author. The new cosmological models in the frame of the Newtonian and general relativistic treatments developed by the author are considered in this report as an example of immediate implementation of new astro-knowledge into the education for modern agrarian students. The centrifugal forces acting between particles rotating randomly around each other are shown to be able to reverse gravitational collapse.

Building capacity for health promotion--a case study from China.

PubMed

Tang, Kwok-Cho; Nutbeam, Don; Kong, Lingzhi; Wang, Ruotao; Yan, Jun

2005-09-01

During the period 1997-2000 a technical assistance project to build capacity for community-based health promotion was implemented in seven cities and one province in China. The technical assistance project formed part of a much larger World Bank supported program to improve disease prevention capabilities in China, commonly known as Health VII. The technical assistance project was funded by the Australian Agency for International Development. It was designed to develop capacity within the Ministry of Health (MOH) and the cities and province in the management of community-based health promotion projects, as well as supporting institutional development and public health policy reform. There are some relatively unique features of this technical assistance which helped shape its implementation and impact. It sought to provide the Chinese MOH and the cities and province with an introduction to comprehensive health promotion strategies, in contrast to the more limited information, education and communication strategies. The project was provided on a continuing basis over 3 years through a single institution, rather than as a series of ad hoc consultancies by individuals. Teaching and learning processes were developmental, leading progressively to a greater degree of local Chinese input and management to ensure sustainability and maintenance of technical support for the project. Based on this experience, this paper presents a model for capacity building projects of this type. It describes the education, training and planning activities that were the key inputs to the project, as well as the limited available evidence on the impact of the project. It describes how the project evolved over time to meet the changing needs of the participants, specifically how the content of the project shifted from a risk-factor orientation to a settings-based focus, and the delivery of the project moved from an expert-led approach to a more participatory, problem based learning approach. In terms of impact, marked differences before and after the implementation of the training activities were identified in key areas for reform, in addition to the self reported positive change in knowledge, and a high level of participant satisfaction. Key lessons are summarized. Technical assistance projects of this kind benefit from continuity and a high level of coordination, the provision of culturally and linguistically appropriate teaching, and a clear understanding of the need to match workforce development with organizational/institutional development.

Criteria for successful uptake of AAL technologies: lessons learned from Norwegian pilot projects.

PubMed

Svagård, Ingrid; Ausen, Dag; Standal, Kristin

2013-01-01

Implementation of AAL-technology as an integrated part of public health and care services requires a systematic and multidisciplinary approach. There are several challenges that need to be handled in parallel and with sustained effort over time, to tackle the multidimensional problem of building the value chain that is required for widespread uptake of AAL technology. Several pilot projects are on-going in Norway, involving municipalities, technology providers and research partners. Examples are "Home Safety" (NO: Trygghetspakken) and "Safe Tracks" (NO: Trygge spor). This paper will elaborate on our lessons learned with focus on five main points: 1) User-friendly and robust technology 2) Technology adapted organization 3) Service oriented technology providers 4) Care service organizations as demanding customer and 5) Sustainable financial model.

Engagement studios: students and communities working to address the determinants of health.

PubMed

Bainbridge, Lesley; Grossman, Susan; Dharamsi, Shafik; Porter, Jill; Wood, Victoria

2014-01-01

This article presents an innovative model for interprofessional community-oriented learning. The Engagement Studios model involves a partnership between community organizations and students as equal partners in conversations and activities aimed at addressing issues of common concern as they relate to the social determinants of health. Interprofessional teams of students from health and non-health disciplines work with community partners to identify priority community issues and explore potential solutions. The student teams work with a particular community organization, combining their unique disciplinary perspectives to develop a project proposal, which addresses the community issues that have been jointly identified. Approved proposals receive a small budget to implement the project. In this paper we present the Engagement Studios model and share lessons learned from a pilot of this educational initiative.

Bibliography. Computer-Oriented Projects, 1987.

ERIC Educational Resources Information Center

Smith, Richard L., Comp.

1988-01-01

Provides an annotated list of references on computer-oriented projects. Includes information on computers; hands-on versus simulations; games; instruction; students' attitudes and learning styles; artificial intelligence; tutoring; and application of spreadsheets. (RT)

Public assessment of new surveillance-oriented security technologies: Beyond the trade-off between privacy and security.

PubMed

Pavone, Vincenzo; Esposti, Sara Degli

2012-07-01

As surveillance-oriented security technologies (SOSTs) are considered security enhancing but also privacy infringing, citizens are expected to trade part of their privacy for higher security. Drawing from the PRISE project, this study casts some light on how citizens actually assess SOSTs through a combined analysis of focus groups and survey data. First, the outcomes suggest that people did not assess SOSTs in abstract terms but in relation to the specific institutional and social context of implementation. Second, from this embedded viewpoint, citizens either expressed concern about government's surveillance intentions and considered SOSTs mainly as privacy infringing, or trusted political institutions and believed that SOSTs effectively enhanced their security. None of them, however, seemed to trade privacy for security because concerned citizens saw their privacy being infringed without having their security enhanced, whilst trusting citizens saw their security being increased without their privacy being affected.

[Multifamily therapy in children with learning disabilities].

PubMed

Retzlaff, Rüdiger; Brazil, Susanne; Goll-Kopka, Andrea

2008-01-01

Multifamily therapy is an evidence-based method used in the treatment and prevention of severe psychiatric disorders, behavioral problems and physical illnesses in children, adolescents and adults. For preventive family-oriented work with children with learning disorders there is a lack of therapeutic models. This article presents results from an innovative pilot project--multiple family groups for families with a learning disabled child of primary school age (six to eleven years old). Based on a systemic approach, this resource-oriented program integrates creative, activity-based interventions and group therapy techniques and conveys a comprehensive understanding of the challenges associated with learning disorders. Because of the pilot character of the study and the small sample size, the results have to be interpreted with care. The results do however clearly support the wider implementation and evaluation of the program in child guidance clinics, social-pediatric centers, as well as child and adolescent clinics and schools.

A Java application for tissue section image analysis.

PubMed

Kamalov, R; Guillaud, M; Haskins, D; Harrison, A; Kemp, R; Chiu, D; Follen, M; MacAulay, C

2005-02-01

The medical industry has taken advantage of Java and Java technologies over the past few years, in large part due to the language's platform-independence and object-oriented structure. As such, Java provides powerful and effective tools for developing tissue section analysis software. The background and execution of this development are discussed in this publication. Object-oriented structure allows for the creation of "Slide", "Unit", and "Cell" objects to simulate the corresponding real-world objects. Different functions may then be created to perform various tasks on these objects, thus facilitating the development of the software package as a whole. At the current time, substantial parts of the initially planned functionality have been implemented. Getafics 1.0 is fully operational and currently supports a variety of research projects; however, there are certain features of the software that currently introduce unnecessary complexity and inefficiency. In the future, we hope to include features that obviate these problems.

Embedding CLIPS in a database-oriented diagnostic system

NASA Technical Reports Server (NTRS)

Conway, Tim

1990-01-01

This paper describes the integration of C Language Production Systems (CLIPS) into a powerful portable maintenance aid (PMA) system used for flightline diagnostics. The current diagnostic target of the system is the Garrett GTCP85-180L, a gas turbine engine used as an Auxiliary Power Unit (APU) on some C-130 military transport aircraft. This project is a database oriented approach to a generic diagnostic system. CLIPS is used for 'many-to-many' pattern matching within the diagnostics process. Patterns are stored in database format, and CLIPS code is generated by a 'compilation' process on the database. Multiple CLIPS rule sets and working memories (in sequence) are supported and communication between the rule sets is achieved via the export and import commands. Work is continuing on using CLIPS in other portions of the diagnostic system and in re-implementing the diagnostic system in the Ada language.

SANDS: a service-oriented architecture for clinical decision support in a National Health Information Network.

PubMed

Wright, Adam; Sittig, Dean F

2008-12-01

In this paper, we describe and evaluate a new distributed architecture for clinical decision support called SANDS (Service-oriented Architecture for NHIN Decision Support), which leverages current health information exchange efforts and is based on the principles of a service-oriented architecture. The architecture allows disparate clinical information systems and clinical decision support systems to be seamlessly integrated over a network according to a set of interfaces and protocols described in this paper. The architecture described is fully defined and developed, and six use cases have been developed and tested using a prototype electronic health record which links to one of the existing prototype National Health Information Networks (NHIN): drug interaction checking, syndromic surveillance, diagnostic decision support, inappropriate prescribing in older adults, information at the point of care and a simple personal health record. Some of these use cases utilize existing decision support systems, which are either commercially or freely available at present, and developed outside of the SANDS project, while other use cases are based on decision support systems developed specifically for the project. Open source code for many of these components is available, and an open source reference parser is also available for comparison and testing of other clinical information systems and clinical decision support systems that wish to implement the SANDS architecture. The SANDS architecture for decision support has several significant advantages over other architectures for clinical decision support. The most salient of these are:

Behaviour change strategies for reducing blood pressure-related disease burden: findings from a global implementation research programme.

PubMed

Peiris, David; Thompson, Simon R; Beratarrechea, Andrea; Cárdenas, María Kathia; Diez-Canseco, Francisco; Goudge, Jane; Gyamfi, Joyce; Kamano, Jemima Hoine; Irazola, Vilma; Johnson, Claire; Kengne, Andre P; Keat, Ng Kien; Miranda, J Jaime; Mohan, Sailesh; Mukasa, Barbara; Ng, Eleanor; Nieuwlaat, Robby; Ogedegbe, Olugbenga; Ovbiagele, Bruce; Plange-Rhule, Jacob; Praveen, Devarsetty; Salam, Abdul; Thorogood, Margaret; Thrift, Amanda G; Vedanthan, Rajesh; Waddy, Salina P; Webster, Jacqui; Webster, Ruth; Yeates, Karen; Yusoff, Khalid

2015-11-09

The Global Alliance for Chronic Diseases comprises the majority of the world's public research funding agencies. It is focussed on implementation research to tackle the burden of chronic diseases in low- and middle-income countries and amongst vulnerable populations in high-income countries. In its inaugural research call, 15 projects were funded, focussing on lowering blood pressure-related disease burden. In this study, we describe a reflexive mapping exercise to identify the behaviour change strategies undertaken in each of these projects. Using the Behaviour Change Wheel framework, each team rated the capability, opportunity and motivation of the various actors who were integral to each project (e.g. community members, non-physician health workers and doctors in projects focussed on service delivery). Teams then mapped the interventions they were implementing and determined the principal policy categories in which those interventions were operating. Guidance was provided on the use of Behaviour Change Wheel to support consistency in responses across teams. Ratings were iteratively discussed and refined at several group meetings. There was marked variation in the perceived capabilities, opportunities and motivation of the various actors who were being targeted for behaviour change strategies. Despite this variation, there was a high degree of synergy in interventions functions with most teams utilising complex interventions involving education, training, enablement, environmental restructuring and persuasion oriented strategies. Similar policy categories were also targeted across teams particularly in the areas of guidelines, communication/marketing and service provision with few teams focussing on fiscal measures, regulation and legislation. The large variation in preparedness to change behaviour amongst the principal actors across these projects suggests that the interventions themselves will be variably taken up, despite the similarity in approaches taken. The findings highlight the importance of contextual factors in driving success and failure of research programmes. Forthcoming outcome and process evaluations from each project will build on this exploratory work and provide a greater understanding of factors that might influence scale-up of intervention strategies.

Object oriented development of engineering software using CLIPS

NASA Technical Reports Server (NTRS)

Yoon, C. John

1991-01-01

Engineering applications involve numeric complexity and manipulations of a large amount of data. Traditionally, numeric computation has been the concern in developing an engineering software. As engineering application software became larger and more complex, management of resources such as data, rather than the numeric complexity, has become the major software design problem. Object oriented design and implementation methodologies can improve the reliability, flexibility, and maintainability of the resulting software; however, some tasks are better solved with the traditional procedural paradigm. The C Language Integrated Production System (CLIPS), with deffunction and defgeneric constructs, supports the procedural paradigm. The natural blending of object oriented and procedural paradigms has been cited as the reason for the popularity of the C++ language. The CLIPS Object Oriented Language's (COOL) object oriented features are more versatile than C++'s. A software design methodology based on object oriented and procedural approaches appropriate for engineering software, and to be implemented in CLIPS was outlined. A method for sensor placement for Space Station Freedom is being implemented in COOL as a sample problem.

A quantitative comparison of the hemispheric, areal, and laminar origins of sensory and motor cortical projections to the superior colliculus of the cat.

PubMed

Butler, Blake E; Chabot, Nicole; Lomber, Stephen G

2016-09-01

The superior colliculus (SC) is a midbrain structure central to orienting behaviors. The organization of descending projections from sensory cortices to the SC has garnered much attention; however, rarely have projections from multiple modalities been quantified and contrasted, allowing for meaningful conclusions within a single species. Here, we examine corticotectal projections from visual, auditory, somatosensory, motor, and limbic cortices via retrograde pathway tracers injected throughout the superficial and deep layers of the cat SC. As anticipated, the majority of cortical inputs to the SC originate in the visual cortex. In fact, each field implicated in visual orienting behavior makes a substantial projection. Conversely, only one area of the auditory orienting system, the auditory field of the anterior ectosylvian sulcus (fAES), and no area involved in somatosensory orienting, shows significant corticotectal inputs. Although small relative to visual inputs, the projection from the fAES is of particular interest, as it represents the only bilateral cortical input to the SC. This detailed, quantitative study allows for comparison across modalities in an animal that serves as a useful model for both auditory and visual perception. Moreover, the differences in patterns of corticotectal projections between modalities inform the ways in which orienting systems are modulated by cortical feedback. J. Comp. Neurol. 524:2623-2642, 2016. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

Transforming mental health services: a participatory mixed methods study to promote and evaluate the implementation of recovery-oriented services.

PubMed

Park, Melissa M; Zafran, Hiba; Stewart, Janet; Salsberg, Jon; Ells, Carolyn; Rouleau, Suzanne; Estein, Orly; Valente, Thomas W

2014-09-10

Since 2007, the Mental Health Commission of Canada has worked collaboratively across all provinces to publish a framework and strategy for recovery and well-being. This federal document is now mandated as policy for implementation between 2012 and 2017. The proposed strategies have been written into provincial health plans, hospital accreditation standards, and annual objectives of psychiatric departments and community organizations. The core premise is: to empower persons with mental illness and their families to become participants in designing their own care, while meeting the needs of a diverse Canadian population. However, recovery principles do not come with an implementation guide to fit the variability of different local contexts. How can policy recommendations and accreditation standards be effectively tailored to support a diversity of stakeholder values? To our knowledge, there is little evidence indicating the most effective manner to accelerate the uptake of recovery-oriented services among providers in a given/particular mental health treatment setting. This three-year Canadian Institute of Health Research Partnership in Health System Improvement and The Rx&D Health Research Foundation (HRF) Fostering Canadian Innovation in Research study (2013 to 2017) proposed participatory approaches to implementing recovery principles in a Department of Psychiatry serving a highly diverse Canadian and immigrant population. This project will be conducted in overlapping and recursive phases: I) Conduct formative research to (a) measure the current knowledge and attitudes toward recovery and recovery-oriented practices among service providers, while concurrently (b) exploring the experiential knowledge of recovery service-users and family members; II) Collaborate with service-users and the network-identified opinion leaders among providers to tailor Recovery-in-Action Initiatives to fit the needs and resources of a Department of Psychiatry; and III) Conduct a systematic theory-based evaluation of changes in attitudes and practices within the service-user/service-provider partnership group relative to the overall provider network of the department and identify the barriers and supports within the local context. Our anticipated outcome is a participatory toolkit to tailor recovery-oriented services, which will be disseminated to the Mental Health Commission of Canada and Accreditation Canada at the federal level, agencies at the provincial levels, and local knowledge end-users.

The First Year with the Literature-Based Basals: Examining Teachers' Theoretical Orientations and the Utilization of the Texts in One Rural School.

ERIC Educational Resources Information Center

Altieri, Jennifer L.

1998-01-01

Explores how teachers of differing philosophical orientations toward reading react to the implementation of a literature-based basal series. Finds evidence for a relationship between a teacher's theoretical orientation toward reading and the implementation of a new basal series. States that despite differences between the old and new basal sets,…

Object-Oriented Implementation of the NAS Parallel Benchmarks using Charm++

NASA Technical Reports Server (NTRS)

Krishnan, Sanjeev; Bhandarkar, Milind; Kale, Laxmikant V.

1996-01-01

This report describes experiences with implementing the NAS Computational Fluid Dynamics benchmarks using a parallel object-oriented language, Charm++. Our main objective in implementing the NAS CFD kernel benchmarks was to develop a code that could be used to easily experiment with different domain decomposition strategies and dynamic load balancing. We also wished to leverage the object-orientation provided by the Charm++ parallel object-oriented language, to develop reusable abstractions that would simplify the process of developing parallel applications. We first describe the Charm++ parallel programming model and the parallel object array abstraction, then go into detail about each of the Scalar Pentadiagonal (SP) and Lower/Upper Triangular (LU) benchmarks, along with performance results. Finally we conclude with an evaluation of the methodology used.

Predicting on-site environmental impacts of municipal engineering works

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gangolells, Marta, E-mail: marta.gangolells@upc.edu; Casals, Miquel, E-mail: miquel.casals@upc.edu; Forcada, Núria, E-mail: nuria.forcada@upc.edu

2014-01-15

The research findings fill a gap in the body of knowledge by presenting an effective way to evaluate the significance of on-site environmental impacts of municipal engineering works prior to the construction stage. First, 42 on-site environmental impacts of municipal engineering works were identified by means of a process-oriented approach. Then, 46 indicators and their corresponding significance limits were determined on the basis of a statistical analysis of 25 new-build and remodelling municipal engineering projects. In order to ensure the objectivity of the assessment process, direct and indirect indicators were always based on quantitative data from the municipal engineering projectmore » documents. Finally, two case studies were analysed and found to illustrate the practical use of the proposed model. The model highlights the significant environmental impacts of a particular municipal engineering project prior to the construction stage. Consequently, preventive actions can be planned and implemented during on-site activities. The results of the model also allow a comparison of proposed municipal engineering projects and alternatives with respect to the overall on-site environmental impact and the absolute importance of a particular environmental aspect. These findings are useful within the framework of the environmental impact assessment process, as they help to improve the identification and evaluation of on-site environmental aspects of municipal engineering works. The findings may also be of use to construction companies that are willing to implement an environmental management system or simply wish to improve on-site environmental performance in municipal engineering projects. -- Highlights: • We present a model to predict the environmental impacts of municipal engineering works. • It highlights significant on-site environmental impacts prior to the construction stage. • Findings are useful within the environmental impact assessment process. • They also help contractors to implement environmental management systems.« less

Development of a tripolar model of technology acceptance: Hospital-based physicians' perspective on EHR.

PubMed

Beglaryan, Mher; Petrosyan, Varduhi; Bunker, Edward

2017-06-01

In health care, information technologies (IT) hold a promise to harness an ever-increasing flow of health related information and bring significant benefits including improved quality of care, efficiency, and cost containment. One of the main tools for collecting and utilizing health data is the Electronic Health Record (EHR). EHRs implementation can face numerous barriers to acceptance including attitudes and perceptions of potential users, required effort attributed to their implementation and usage, and resistance to change. Various theories explicate different aspects of technology deployment, implementation, and acceptance. One of the common theories is the Technology Acceptance Model (TAM), which helps to study the implementation of different healthcare IT applications. The objectives of this study are: to understand the barriers of EHR implementation from the perspective of physicians; to identify major determinants of physicians' acceptance of technology; and develop a model that explains better how EHRs (and technologies in general) are accepted by physicians. The proposed model derives from a cross-sectional survey of physicians selected through multi-stage cluster sampling from the hospitals of Yerevan, Armenia. The study team designed the survey instrument based on a literature review on barriers of EHR implementation. The analysis employed exploratory structural equation modeling (ESEM) with a robust weighted least squares (WLSMV) estimator for categorical indicators. The analysis progressed in two steps: appraisal of the measurement model and testing of the structural model. The derived model identifies the following factors as direct determinants of behavioral intention to use a novel technology: projected collective usefulness; personal innovativeness; patient influence; and resistance to change. Other factors (e.g., organizational change, professional relationships, administrative monitoring, organizational support and computer anxiety) exert their effects through projected collective usefulness, perceived usefulness, and perceived ease of use. The model reconciles individual-oriented and environment-oriented theoretical approaches and proposes a Tripolar Model of Technology Acceptance (TMTA), bringing together three key pillars of the healthcare: patients, practitioners, and provider organizations. The proposed TMTA explains 85% of variance of behavioral intention to use technology. The current study draws from the barriers of EHR implementation and identifies major determinants of technology acceptance among physicians. The study proposes TMTA as affording stronger explanative and predictive abilities for the health care system. TMTA paves a long overlooked gap in TAM and its descendants, which, in organizational settings, might distort construal of technology acceptance. It also explicates with greater depth the interdependence of different participants of the healthcare and complex interactions between healthcare and technologies. Copyright © 2017 Elsevier B.V. All rights reserved.

A Semester-Long Project-Oriented Biochemistry Laboratory Based on "Helicobacter pylori" Urease

ERIC Educational Resources Information Center

Farnham, Kate R.; Dube, Danielle H.

2015-01-01

Here we present the development of a 13 week project-oriented biochemistry laboratory designed to introduce students to foundational biochemical techniques and then enable students to perform original research projects once they have mastered these techniques. In particular, we describe a semester-long laboratory that focuses on a biomedically…

Project-Based Learning in Post-WWII Japanese School Curriculum: An Analysis via Curriculum Orientations

ERIC Educational Resources Information Center

Nomura, Kazuyuki

2017-01-01

In the 2000s, the new national curriculum, dubbed as the "yutori curriculum," introduced a new subject for project-based learning "Integrated Study" as its prominent feature. Comparing curriculum orientations in project-based learning in three historical periods after the WWII including Integrated Study, this paper aims to…

Project management - challenges in dealing with academic and non-academic partners

NASA Astrophysics Data System (ADS)

Henkel, Daniela; Eisenhauer, Anton; Drossou-Berendes, Alexandra

2016-04-01

Modern research projects on national, European and international level are challenged by an increasing requirement of inter and trans-disciplinarily, societal relevance and educational outreach as well as market oriented applications. In particular, to be successful in European research in the frame of HORIZON 2020, the EU Framework Programme for Research and Innovation, it is crucial that relatively large international research consortia involve academic and non-academic partners, NGOs, private and non-private institutions as well as industrial companies. For the management and organisation of such consortia coordinators have to deal with significant differences between multi-national and multi-sectorial administrations and research environments, in order to secure a successful implementation of the project. This often costs research and non-academic partners tremendous efforts, not to say excessive demands. Based on the experiences made in the frame of an Innovative Training Network (ITN) project within the HORIZON 2020 Marie Skłodowska-Curie Actions, this presentation identifies organisational pitfalls and major challenges of the project management for European funded research involving multi-national academic and non-academic research partners. Possible strategies are discussed to circumvent and avoid conflicts already at the beginning of the project.

Object-orientated DBMS techniques for time-oriented medical record.

PubMed

Pinciroli, F; Combi, C; Pozzi, G

1992-01-01

In implementing time-orientated medical record (TOMR) management systems, use of a relational model played a big role. Many applications have been developed to extend query and data manipulation languages to temporal aspects of information. Our experience in developing TOMR revealed some deficiencies inside the relational model, such as: (a) abstract data type definition; (b) unified view of data, at a programming level; (c) management of temporal data; (d) management of signals and images. We identified some first topics to face by an object-orientated approach to database design. This paper describes the first steps in designing and implementing a TOMR by an object-orientated DBMS.

[CMACPAR an modified parallel neuro-controller for control processes].

PubMed

Ramos, E; Surós, R

1999-01-01

CMACPAR is a Parallel Neurocontroller oriented to real time systems as for example Control Processes. Its characteristics are mainly a fast learning algorithm, a reduced number of calculations, great generalization capacity, local learning and intrinsic parallelism. This type of neurocontroller is used in real time applications required by refineries, hydroelectric centers, factories, etc. In this work we present the analysis and the parallel implementation of a modified scheme of the Cerebellar Model CMAC for the n-dimensional space projection using a mean granularity parallel neurocontroller. The proposed memory management allows for a significant memory reduction in training time and required memory size.

The Magsat precision vector magnetometer

NASA Technical Reports Server (NTRS)

Acuna, M. H.

1980-01-01

This paper examines the Magsat precision vector magnetometer which is designed to measure projections of the ambient field in three orthogonal directions. The system contains a highly stable and linear triaxial fluxgate magnetometer with a dynamic range of + or - 2000 nT (1 nT = 10 to the -9 weber per sq m). The magnetometer electronics, analog-to-digital converter, and digitally controlled current sources are implemented with redundant designs to avoid a loss of data in case of failures. Measurements are carried out with an accuracy of + or - 1 part in 64,000 in magnitude and 5 arcsec in orientation (1 arcsec = 0.00028 deg).

Oratoria Online: The Use of Technology Enhaced Learning to Improve Students' Oral Skills

NASA Astrophysics Data System (ADS)

Dornaleteche, Jon

New ITCs have proven to be useful tools for implementing innovating didactic and pedagogical formula oriented to enhance students' en teachers' creativity. The up-and-coming massive e-learning and blended learning projects are clear examples of such a phenomenon. The teaching of oral communication offers a perfect scenario to experiment with these formulas. Since the traditional face to face approach for teaching 'Speech techniques' does not keep up with the new digital environment that surround students, it is necessary to move towards an 'Online oratory' model focused on using TEL to improve oral skills.

Predictive Engineering Tools for Injection-Molded Long-Carbon-Fiber Thermoplastic Composites - FY 2014 Fourth Quarterly Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nguyen, Ba Nghiep; Fifield, Leonard S.; Mathur, Raj N.

2014-09-30

During the last quarter of FY 2014, the following technical progress has been made toward project milestones: 1) Autodesk, Inc. (Autodesk) has implemented a new fiber length distribution (FLD) model based on an unbreakable length assumption with Reduced Order Modeling (ROM) by the Proper Orthogonal Decomposition (POD) approach in the mid-plane, dual-domain and 3D solvers. 2) Autodesk improved the ASMI 3D solver for fiber orientation prediction using the anisotropic rotary diffusion (ARD) – reduced strain closure (RSC) model. 3) Autodesk received consultant services from Prof. C.L. Tucker at the University of Illinois on numerical simulation of fiber orientation and fibermore » length. 4) PlastiComp, Inc. (PlastiComp) suggested to Purdue University a procedure for fiber separation using an inert-gas atmosphere in the burn-off furnace. 5) Purdue University (Purdue) hosted a face-to-face project review meeting at Purdue University on August 6-7, 2014. 6) Purdue conducted fiber orientation measurements for 3 PlastiComp plaques: fast-fill 30wt% LCF/PP edged-gated, slow-fill 50wt% LCF/PP edge-gated, and slow-fill 50wt% LCF/PP center-gated plaques, and delivered the orientation data for these plaques at the selected locations (named A, B, and C) to PNNL. 7) PNNL conducted ASMI mid-plane analyses for the above PlastiComp plaques and compared the predicted fiber orientations with the measured data provided by Purdue at Locations A, B, and C on these plaques. 8) PNNL planned the project review meeting (August 6-7, 2014) with Purdue. 9) PNNL performed ASMI analyses for the Toyota complex parts with and without ribs, having different wall thicknesses, and using the PlastiComp 50wt% LCF/PP, 50wt% LCF/PA66, 30wt% LCF/PP, and 30wt% LCF/PA66 materials to provide guidance for tool design and modifications needed for molding these parts. 10) Magna Exteriors and Interiors Corp. (Magna) molded plaques from the 50% LCF/PP and 50% LCF/PA66 materials received from Plasticomp in order to extract machine purgings (purge materials) from Magna’s 200-Ton Injection Molding machine targeted to mold the complex part. 11) Toyota and Magna discussed with PNNL tool modification for molding the complex part.« less

Initial Results of the Master's Degree Programme in "Leadership in Medicine" – Impact on hospital-based follow-on training of doctors

PubMed Central

Wulfert, Chris-Henrik; Hoitz, Joachim; Senger, Ulrike

2017-01-01

Objective: This pilot project, which was jointly conducted by a hospital and a university, describes the development of the Master's Degree Programme in Leadership in Medicine, a course designed to supplement medical specialty training. The aim of the pilot project is to demonstrate how hospital-based projects on personnel and organisational development undertaken under academic supervision can be used to increase leadership responsibility among doctors whose duties include providing initial and follow-on training and to professionalise medical specialty training as a leadership task. This need arose from the nationwide requirements and an internal audit regarding follow-on training. The version of the degree programme described below aims to further the personnel development of the participants in the field of didactics. Method: Each of the nine modules is made up of two classroom-based phases and one distance learning phase. The distance learning phase involves undertaking hospital-based projects on personnel and organisational development under academic supervision. The pilot phase participants were hospital doctors who, as part of their duties, hold leadership responsibility or are involved in the follow-on training of doctors. Results: The 17 participants successfully implemented more than 30 hospital-based projects during the distance learning phases of the nine modules. These projects included the development of medical specialty curricula, relevant didactic methods and evaluation design and were subsequently presented and subjected to reflection in interdisciplinary groups. The project presentation together with the project report were regarded as proof of competency. Conclusion: In addition to enhancing participant competency, the degree model described, which interlinks theory and practice, promotes organisational development through the implementation of projects undertaken under academic supervision. This has a double impact on the quality of medical follow-on training at the hospital where the participant is based, for not only is the individual's didactic competency enhanced, but so is the "learning organisation" as a whole as a result of continuous project orientation. PMID:29226220

Initial Results of the Master's Degree Programme in "Leadership in Medicine" - Impact on hospital-based follow-on training of doctors.

PubMed

Wulfert, Chris-Henrik; Hoitz, Joachim; Senger, Ulrike

2017-01-01

Objective: This pilot project, which was jointly conducted by a hospital and a university, describes the development of the Master's Degree Programme in Leadership in Medicine, a course designed to supplement medical specialty training. The aim of the pilot project is to demonstrate how hospital-based projects on personnel and organisational development undertaken under academic supervision can be used to increase leadership responsibility among doctors whose duties include providing initial and follow-on training and to professionalise medical specialty training as a leadership task. This need arose from the nationwide requirements and an internal audit regarding follow-on training. The version of the degree programme described below aims to further the personnel development of the participants in the field of didactics. Method: Each of the nine modules is made up of two classroom-based phases and one distance learning phase. The distance learning phase involves undertaking hospital-based projects on personnel and organisational development under academic supervision. The pilot phase participants were hospital doctors who, as part of their duties, hold leadership responsibility or are involved in the follow-on training of doctors. Results: The 17 participants successfully implemented more than 30 hospital-based projects during the distance learning phases of the nine modules. These projects included the development of medical specialty curricula, relevant didactic methods and evaluation design and were subsequently presented and subjected to reflection in interdisciplinary groups. The project presentation together with the project report were regarded as proof of competency. Conclusion: In addition to enhancing participant competency, the degree model described, which interlinks theory and practice, promotes organisational development through the implementation of projects undertaken under academic supervision. This has a double impact on the quality of medical follow-on training at the hospital where the participant is based, for not only is the individual's didactic competency enhanced, but so is the "learning organisation" as a whole as a result of continuous project orientation.

Collaborative Writing among Second Language Learners in Academic Web-Based Projects

ERIC Educational Resources Information Center

Kessler, Greg; Bikowski, Dawn; Boggs, Jordan

2012-01-01

This study investigates Web-based, project oriented, many-to-many collaborative writing for academic purposes. Thirty-eight Fulbright scholars in an orientation program at a large Midwestern university used a Web-based word processing tool to collaboratively plan and report on a research project. The purpose of this study is to explore and…

Hispanic Orientation to Life in America. Project HOLA, 1987-88. OREA Report.

ERIC Educational Resources Information Center

Berney, Tomi D.; Mohagdam, Val

In its fifth year, the Hispanic Orientation to Life in America Project (Project HOLA) served 472 Spanish-speaking students of limited English proficiency. The aim of the program was to help students develop English language skills, enter mainstream classes, and understand Spanish and American culture. The program provided instruction in English as…

Preferred orientation of albumin adsorption on a hydrophilic surface from molecular simulation.

PubMed

Hsu, Hao-Jen; Sheu, Sheh-Yi; Tsay, Ruey-Yug

2008-12-01

In general, non-specific protein adsorption follows a two-step procedure, i.e. first adsorption onto a surface in native form, and a subsequent conformational change on the surface. In order to predict the subsequent conformational change, it is important to determine the preferred orientation of an adsorbed protein in the first step of the adsorption. In this work, a method based on finding the global minimum of the interaction potential energy of an adsorbed protein has been developed to delineate the preferred orientations for the adsorption of human serum albumin (HSA) on a model surface with a hydrophilic self-assembled monolayer (SAM). For computational efficiency, solvation effects were greatly simplified by only including the dampening of electrostatic effects while neglecting contributions due to the competition of water molecules for the functional groups on the surface. A contour map obtained by systematic rotation of a molecule in conjunction with perpendicular motion to the surface gives the minimum interaction energy of the adsorbed molecule at various adsorption orientations. Simulation results show that for an -OH terminated SAM surface, a "back-on" orientation of HSA is the preferred orientation. The projection area of this adsorption orientation corresponds with the "triangular-side-on" adsorption of a heart shaped HSA molecule. The method proposed herein is able to provide results which are consistent with those predicted by Monte Carlo (MC) simulations with a substantially less computing cost. The high computing efficiency of the current method makes it possible to be implemented as a design tool for the control of protein adsorption on surfaces; however, before this can be fully realized, these methods must be further developed to enable interaction free energy to be calculated in place of potential energy, along with a more realistic representation of solvation effects.

[Memorandum - research funding of prevention].

PubMed

Walter, U; Gold, C; Hoffmann, W; Jahn, I; Töppich, J; Wildner, M; Dubben, S; Franze, M; John, J; Kliche, T; Lehmann, H; Naegele, G; Nöcker, G; Plaumann, M; Pott, E; Robra, B-P

2012-08-01

The memorandum of the research funding of prevention has been devised within the framework of the Prevention Research Funding Programme of the Federal Ministry of Education and Research. It consists not only of the obtained findings of the research-practice co-operation but also of recommendations for the implementation of prospective, innovational, effective, practice-oriented and sustainable research. The respective knowledge has been acquired from quantitative surveys on the experiences of scientists and practice partners within the prevention research funding project as well as from extensive qualitative methods of structured group evaluation. A participatory co-operation between research and practice based on mutual respect, trust and recognition is seen as mandatory for the further development of both prevention and health promotion research. Research and practice partners are required to engage in an ab initio collaboration starting from the conception phase, whereby it is advisable to encourage and fortify the communication between research, practice and funding partners by systematic surveillance in form of a meta-project. In addition, the inclusion of the target population from the outset and on a collaborative basis is considered as beneficial in order to ensure the practical application of the research findings. Furthermore, innovatory research designs which are able to provide a framework for internal flexibility, continuous re-assessment and adjustment are fundamental for the implementation of practice-oriented research. Moreover, a dynamic co-operation between different groups of interest not only depends on sharing responsibility but also on sufficient funding for both research and practice, which is particularly important for the transfer and communication of the attained findings. With regard to the evaluation of both effectiveness and sustainability of interventions, a research funding project is required which makes long-term results possible through the utilization of regulated monitoring and guarantees quality and continuous effectiveness. Furthermore, in order to stimulate progress within the basic theories of prevention and health promotion, it is also essential for a funding project to focus on elementary concepts. Additionally, for the efficient and sustainable development of health within a population it is advisable to apply both self-contained research and the involvement of primary prevention and health promotion to research projects concerning health, social affairs, education, work and environment. © Georg Thieme Verlag KG Stuttgart · New York.

Packet utilisation definitions for the ESA XMM mission

NASA Technical Reports Server (NTRS)

Nye, H. R.

1994-01-01

XMM, ESA's X-Ray Multi-Mirror satellite, due for launch at the end of 1999 will be the first ESA scientific spacecraft to implement the ESA packet telecommand and telemetry standards and will be the first ESOC-controlled science mission to take advantage of the new flight control system infrastructure development (based on object-oriented design and distributed-system architecture) due for deployment in 1995. The implementation of the packet standards is well defined at packet transport level. However, the standard relevant to the application level (the ESA Packet Utilization Standard) covers a wide range of on-board 'services' applicable in varying degrees to the needs of XMM. In defining which parts of the ESA PUS to implement, the XMM project first considered the mission objectives and the derived operations concept and went on to identify a minimum set of packet definitions compatible with these aspects. This paper sets the scene as above and then describes the services needed for XMM and the telecommand and telemetry packet types necessary to support each service.

An assessment of implementation of Community-Oriented Primary Care in Kenyan family medicine postgraduate medical education programmes

PubMed Central

Shabani, Jacob; Taché, Stephanie; Mohamoud, Gulnaz; Mahoney, Megan

2016-01-01

Background and objectives Family medicine postgraduate programmes in Kenya are examining the benefits of Community-Oriented Primary Care (COPC) curriculum, as a method to train residents in population-based approaches to health care delivery. Whilst COPC is an established part of family medicine training in the United States, little is known about its application in Kenya. We sought to conduct a qualitative study to explore the development and implementation of COPC curriculum in the first two family medicine postgraduate programmes in Kenya. Method Semi-structured interviews of COPC educators, practitioners, and academic stakeholders and focus groups of postgraduate students were conducted with COPC educators, practitioners and academic stakeholders in two family medicine postgraduate programmes in Kenya. Discussions were transcribed, inductively coded and thematically analysed. Results Two focus groups with eight family medicine postgraduate students and interviews with five faculty members at two universities were conducted. Two broad themes emerged from the analysis: expected learning outcomes and important community-based enablers. Three learning outcomes were (1) making a community diagnosis, (2) understanding social determinants of health and (3) training in participatory research. Three community-based enablers for sustainability of COPC were (1) partnerships with community health workers, (2) community empowerment and engagement and (3) institutional financial support. Conclusions Our findings illustrate the expected learning outcomes and important community-based enablers associated with the successful implementation of COPC projects in Kenya and will help to inform future curriculum development in Kenya. PMID:28155322

Information Technology: A Tool to Cut Health Care Costs

NASA Technical Reports Server (NTRS)

Mukkamala, Ravi; Maly, K. J.; Overstreet, C. M.; Foudriat, E. C.

1996-01-01

Old Dominion University embarked on a project to see how current computer technology could be applied to reduce the cost and or to improve the efficiency of health care services. We designed and built a prototype for an integrated medical record system (MRS). The MRS is written in Tool control language/Tool kit (Tcl/Tk). While the initial version of the prototype had patient information hard coded into the system, later versions used an INGRES database for storing patient information. Currently, we have proposed an object-oriented model for implementing MRS. These projects involve developing information systems for physicians and medical researchers to enhance their ability for improved treatment at reduced costs. The move to computerized patient records is well underway, several standards exist for laboratory records, and several groups are working on standards for other portions of the patient record.

Particle flow oriented electromagnetic calorimeter optimization for the circular electron positron collider

NASA Astrophysics Data System (ADS)

Zhao, H.; Fu, C.; Yu, D.; Wang, Z.; Hu, T.; Ruan, M.

2018-03-01

The design and optimization of the Electromagnetic Calorimeter (ECAL) are crucial for the Circular Electron Positron Collider (CEPC) project, a proposed future Higgs/Z factory. Following the reference design of the International Large Detector (ILD), a set of silicon-tungsten sampling ECAL geometries are implemented into the Geant4 simulation, whose performance is then scanned using Arbor algorithm. The photon energy response at different ECAL longitudinal structures is analyzed, and the separation performance between nearby photon showers with different ECAL transverse cell sizes is investigated and parametrized. The overall performance is characterized by a set of physics benchmarks, including νν H events where Higgs boson decays into a pair of photons (EM objects) or gluons (jets) and Z→τ+τ- events. Based on these results, we propose an optimized ECAL geometry for the CEPC project.

[Results and recommendations for vocational rehabilitation from the development project RehaFutur].

PubMed

Riedel, H-P; Schmidt, C; Reinsberg, B; Klügel, T

2012-06-01

The overall project RehaFutur, which has been initiated and funded by the Federal Ministry of Labour and Social Affairs and which involves all the actors of the vocational rehabilitation system, is aimed at advancing the development of the vocational rehabilitation system, so as to prepare it for the challenges ahead. The project started with a group of scientific experts, who formulated 8 fields of action for further developing the vocational rehab system. On this basis, 4 working groups were set up in the framework of a development project to elaborate concrete recommendations on how to implement the necessary changes in vocational rehabilitation. The topics dealt with by the working groups were "self-determination and self-responsibility", "regulation of the overall process", "occupation and working environment" as well as "research". The process was supervised by a steering group, the results were moreover discussed in workshops. Recommendations have been made for 10 subject areas: "consultation and information", "joint service points", "use of the internet", "quality assurance", "individualisation and greater flexibility", "orientation towards the working environment", "participation of the beneficiaries", "research", "legislation", "cooperation of the actors". The next step of the RehaFutur overall project is implementation of those recommendations. This needs to be done in an interdisciplinary manner and conjointly by the agencies and providers involved, including the beneficiaries as experts. As different framework conditions have to be taken into account, the process is a complex one and needs to be supported by systematic research. © Georg Thieme Verlag KG Stuttgart · New York.

Implementing Health Impact Assessment at National Level: An Experience in Iran.

PubMed

Damari, Behzad; Vosoogh-Moghaddam, Abbas; Riazi-Isfahani, Sahand

2018-02-01

According to the general health policies issued in 2014, Health Impact Assessment (HIA) or Health Annex should be implemented in Iran. The present study provided a model for executing HIA in the Iranian context as a developing country. This is a system design study with the qualitative approach. The data on the system components were gathered via reviews of the literature, in-depth interviews and focused group discussions (FGDs) with experts. The information were contently analyzed in order to draft the model and a consensus was reached on by the steering committee. Fifteen in-depth interviews and six FGD meeting were conducted. The equity-based approach in assessing the health impacts of policies, programs and projects were chosen as the most practical tool. Experts believe that for the next five years, HIA should be used just for the "national projects" so that the ministries and national agencies could be empowered. Components of the model including structure, procedures, and standards, management style, mission and resources were prepared. The national regulations and protocols were sent to the SCHFS Secretariat for final revision and the council approval. The hasty implementation of HIA will face serious resistances as the health-oriented attitude and behavior in both government and non-governmental sectors will gradually form. Also, the overlapping of the contents of HIA with other tools such as Environmental, Cultural and Social Impact Assessments, currently used by other sectors, causes difficulties in implementing the HIA by the Ministry of Health and Medical Education.

The work and recovery project: changing organizational culture and practice in New York City outpatient services.

PubMed

Pascaris, Alysia; Shields, Leslie Reed; Wolf, Jessica

2008-01-01

Complex and multiple barriers confront out-patient programs in promoting recovery and addressing mental health recipients' work-related goals. This article describes a focused organizational change project utilizing intensive consultation and technical assistance within five New York City outpatient psychiatric services. The project aimed to increase staff exposure to, understanding and use of work-related and recovery-based concepts to promote consumers' recovery and attainment of employment goals. Tailored assessment, curriculum delivery, and identification and implementation of change objectives were useful strategies in promoting change. This change model can serve to assist programs in their efforts to integrate new approaches and to better understand changes among leadership, staff and consumers, and changes in organizational culture and practice required to support a work and recovery-oriented service paradigm. The project experience suggests that adopting and embracing new practices takes time. Varied and incremental steps toward programmatic and operational changes can be significant and can reap authentic sustainable change occurring in the process of learning, experiencing, internalizing and adjusting to new methods of practice.

The Brewsters: A new resource for interprofessional ethics education.

PubMed

Rozmus, Cathy L; Carlin, Nathan; Polczynski, Angela; Spike, Jeffrey; Buday, Richard

2015-11-01

One of the barriers to interprofessional ethics education is a lack of resources that actively engage students in reflection on living an ethical professional life. This project implemented and evaluated an innovative resource for interprofessional ethics education. The objective of this project was to create and evaluate an interprofessional learning activity on professionalism, clinical ethics, and research ethics. The Brewsters is a choose-your-own-adventure novel that addresses professionalism, clinical ethics, and research ethics. For the pilot of the book, a pre-test/post-test design was used. Once implemented across campus, a post-test was used to evaluate student learning in addition to a student satisfaction survey. A total of 755 students in six academic schools in a health science center completed the activity as part of orientation or in coursework. The project was approved as exempt by the university's Committee for the Protection of Human Subjects. The pilot study with 112 students demonstrated a significant increase in student knowledge. The 755 students who participated in the project had relatively high knowledge scores on the post-test and evaluated the activity positively. Students who read The Brewsters scored well on the post-test and had the highest scores on clinical ethics. Clinical ethics scores may indicate issues encountered in mass media. The Brewsters is an innovative resource for teaching interprofessional ethics and professionalism. Further work is needed to determine whether actual and long-term behavior is affected by the activity. © The Author(s) 2014.

A comparison of two coaching approaches to enhance implementation of a recovery-oriented service model.

PubMed

Deane, Frank P; Andresen, Retta; Crowe, Trevor P; Oades, Lindsay G; Ciarrochi, Joseph; Williams, Virginia

2014-09-01

Moving to recovery-oriented service provision in mental health may entail retraining existing staff, as well as training new staff. This represents a substantial burden on organisations, particularly since transfer of training into practice is often poor. Follow-up supervision and/or coaching have been found to improve the implementation and sustainment of new approaches. We compared the effect of two coaching conditions, skills-based and transformational coaching, on the implementation of a recovery-oriented model following training. Training followed by coaching led to significant sustained improvements in the quality of care planning in accordance with the new model over the 12-month study period. No interaction effect was observed between the two conditions. However, post hoc analyses suggest that transformational coaching warrants further exploration. The results support the provision of supervision in the form of coaching in the implementation of a recovery-oriented service model, and suggest the need to better elucidate the mechanisms within different coaching approaches that might contribute to improved care.

Using an action research process in pharmacy practice research--a cooperative project between university and internship pharmacies.

PubMed

Sørensen, Ellen Westh; Haugbølle, Lotte Stig

2008-12-01

Action research (AR) is a common research-based methodology useful for development and organizational changes in health care when participant involvement is key. However, AR is not widely used for research in the development of pharmaceutical care services in pharmacy practice. To disseminate the experience from using AR methodology to develop cognitive services in pharmacies by describing how the AR process was conducted in a specific study, and to describe the outcome for participants. The study was conducted over a 3-year period and run by a steering group of researchers, pharmacy students, and preceptors. The study design was based on AR methodology. The following data production methods were used to describe and evaluate the AR model: documentary analysis, qualitative interviews, and questionnaires. Experiences from using AR methodology and the outcome for participants are described. A set of principles was followed while the study, called the Pharmacy-University study, was being conducted. These principles are considered useful for designing future AR studies. Outcome for participating pharmacies was registered for staff-oriented and patient-oriented activities. Outcome for students was practice as project leaders and enhancement of clinical pharmacy-based skills. Outcome for researchers and the steering group conducting the study was in-depth knowledge of the status of pharmacies in giving advice to patient groups, and effective learning methods for students. Developing and implementing cognitive pharmaceutical services (CPS) involves wide-reaching changes that require the willingness of pharmacy and staff as well as external partners. The use of AR methodology creates a platform that supports raising the awareness and the possible inclusion of these partners. During this study, a set of tools was developed for use in implementing CPS as part of AR.

Practical Application of Modern Forecasting and Decision Tools at an Operational River Management Agency

NASA Astrophysics Data System (ADS)

Jawdy, C. M.; Carney, S.; Barber, N. M.; Balk, B. C.; Miller, G. A.

2017-12-01

The Tennessee Valley Authority (TVA) recently completed a complete overhaul of our River Forecast System (RFS). This modernization effort encompassed: uplift or addition of 89 data feeds calibration of a 140 subbasin rainfall-runoff model calibration of over 650 miles of hydraulic routings implementation of a decision optimization routine for 29 reservoirs implementation of hydrothermal forecast models for five river-cooled thermal plants creation of decision-friendly displays creation of a user-friendly wiki creation of a robust reporting system This talk will walk attendees through how a 24x7 river and grid management agency made decisions around how to operationalize the latest technologies in hydrology, hydraulics, decision science and information technology. The tradeoffs inherent in such an endeavor will be discussed so that research-oriented attendees can understand how best to align their research if they desire adoption within industry. More industry-oriented attendees can learn about the mechanics of how to succeed at such a large and complex project. Following the description of the modernization project, I can discuss TVA's plans for future growth of the system. We plan to add the following capabilities in the coming years: forecast verification tools to communicate floodplain risk tools to choose the best possible model forcings ensemble inflow modelling a river policy that allows for more reasonable tradeoff of benefits river decisions based on ensembles The iterative staging of such improvements is highly fraught with technical, political and operational risks. I will discuss how TVA's is using what we learned in the RFS modernization effort to grow further into delivering on the promise of these additional technologies.

Predictive Engineering Tools for Injection-Molded Long-Carbon-Thermoplastic Composites: Weight and Cost Analyses

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nguyen, Ba Nghiep; Fifield, Leonard S.; Gandhi, Umesh N.

This project proposed to integrate, optimize and validate the fiber orientation and length distribution models previously developed and implemented in the Autodesk Simulation Moldflow Insight (ASMI) package for injection-molded long-carbon-fiber thermoplastic composites into a cohesive prediction capability. The current effort focused on rendering the developed models more robust and efficient for automotive industry part design to enable weight savings and cost reduction. The project goal has been achieved by optimizing the developed models, improving and integrating their implementations in ASMI, and validating them for a complex 3D LCF thermoplastic automotive part (Figure 1). Both PP and PA66 were used asmore » resin matrices. After validating ASMI predictions for fiber orientation and fiber length for this complex part against the corresponding measured data, in collaborations with Toyota and Magna PNNL developed a method using the predictive engineering tool to assess LCF/PA66 complex part design in terms of stiffness performance. Structural three-point bending analyses of the complex part and similar parts in steel were then performed for this purpose, and the team has then demonstrated the use of stiffness-based complex part design assessment to evaluate weight savings relative to the body system target (≥ 35%) set in Table 2 of DE-FOA-0000648 (AOI #1). In addition, starting from the part-to-part analysis, the PE tools enabled an estimated weight reduction for the vehicle body system using 50 wt% LCF/PA66 parts relative to the current steel system. Also, from this analysis an estimate of the manufacturing cost including the material cost for making the equivalent part in steel has been determined and compared to the costs for making the LCF/PA66 part to determine the cost per “saved” pound.« less

Web Services Implementations at Land Process and Goddard Earth Sciences Distributed Active Archive Centers

NASA Astrophysics Data System (ADS)

Cole, M.; Bambacus, M.; Lynnes, C.; Sauer, B.; Falke, S.; Yang, W.

2007-12-01

NASA's vast array of scientific data within its Distributed Active Archive Centers (DAACs) is especially valuable to both traditional research scientists as well as the emerging market of Earth Science Information Partners. For example, the air quality science and management communities are increasingly using satellite derived observations in their analyses and decision making. The Air Quality Cluster in the Federation of Earth Science Information Partners (ESIP) uses web infrastructures of interoperability, or Service Oriented Architecture (SOA), to extend data exploration, use, and analysis and provides a user environment for DAAC products. In an effort to continually offer these NASA data to the broadest research community audience, and reusing emerging technologies, both NASA's Goddard Earth Science (GES) and Land Process (LP) DAACs have engaged in a web services pilot project. Through these projects both GES and LP have exposed data through the Open Geospatial Consortiums (OGC) Web Services standards. Reusing several different existing applications and implementation techniques, GES and LP successfully exposed a variety data, through distributed systems to be ingested into multiple end-user systems. The results of this project will enable researchers world wide to access some of NASA's GES & LP DAAC data through OGC protocols. This functionality encourages inter-disciplinary research while increasing data use through advanced technologies. This paper will concentrate on the implementation and use of OGC Web Services, specifically Web Map and Web Coverage Services (WMS, WCS) at GES and LP DAACs, and the value of these services within scientific applications, including integration with the DataFed air quality web infrastructure and in the development of data analysis web applications.

Parameterized hardware description as object oriented hardware model implementation

NASA Astrophysics Data System (ADS)

Drabik, Pawel K.

2010-09-01

The paper introduces novel model for design, visualization and management of complex, highly adaptive hardware systems. The model settles component oriented environment for both hardware modules and software application. It is developed on parameterized hardware description research. Establishment of stable link between hardware and software, as a purpose of designed and realized work, is presented. Novel programming framework model for the environment, named Graphic-Functional-Components is presented. The purpose of the paper is to present object oriented hardware modeling with mentioned features. Possible model implementation in FPGA chips and its management by object oriented software in Java is described.

The Impact of Group Design Projects in Engineering on Achievement Goal Orientations and Academic Outcomes

ERIC Educational Resources Information Center

Rambo-Hernandez, Karen E.; Atadero, Rebecca A.; Balgopal, Meena

2017-01-01

This study examined the impact of incorporating group design projects into a second-year engineering class on achievement goal orientations and two academic outcomes: concept inventory and final exam scores. In this study, two sections were taught using lecture format, but one section also completed three group design projects as part of their…

Teaching Power Electronics with a Design-Oriented, Project-Based Learning Method at the Technical University of Denmark

ERIC Educational Resources Information Center

Zhang, Zhe; Hansen, Claus Thorp; Andersen, Michael A. E.

2016-01-01

Power electronics is a fast-developing technology within the electrical engineering field. This paper presents the results and experiences gained from applying design-oriented project-based learning to switch-mode power supply design in a power electronics course at the Technical University of Denmark (DTU). Project-based learning (PBL) is known…

Guidance Oriented Acquisition of Learning Skills (Project GOALS). Final Evaluation Report, 1992-93. OREA Report.

ERIC Educational Resources Information Center

Musante, Patricia

Guidance Oriented Acquisition of Learning Skills (Project GOALS) was a federally-funded project in three Brooklyn (New York) high schools in its fourth year of operation in 1992-93. It served 312 limited-English-proficient and 57 English-proficient students through instruction in English as a Second Language (ESL), native language arts (NLA) in…

Guided Occupation Orientation Project: Syracuse City School District. 1972-73 School Year Informal Evaluation and Recommendation.

ERIC Educational Resources Information Center

Holder, Harold D.; And Others

The report is designed primarily for internal use by administrators and staff members of the Guided Occupational Orientation Project in Syracuse, New York, and contains a summary evaluation for the 1972-73 school year activities associated with the project. One section of the report discusses and displays specific outcomes compared with goals…

Evaluation of the Guided Occupational Orientation-Training and Job Placement Project Syracuse City School District.

ERIC Educational Resources Information Center

Holder, Harold D.; And Others

The report provides a summary of the independent, third party evaluation of the 1972-73 funding year of the Guided Occupational Orientation Project of the Syracuse City School District. A systems approach to evaluation was utilized in this effort. The funded project involved all three grade populations--elementary, junior high school, and senior…

Parents’ Participation in a Work-Based Anti-Poverty Program Can Enhance Their Children's Future Orientation: Understanding Pathways of Influence

PubMed Central

Purtell, Kelly M.; McLoyd, Vonnie C.

2012-01-01

Planning and preparing for life after high school is a central developmental task of American adolescents, and may be even more critical for low-income youth who are less likely to attend a four year college. This study investigates factors that led to the effects of the New Hope Project, a work-based, anti-poverty program directed at parents on youths’ career-related thoughts and planning. The New Hope project was implemented in Milwaukee, WI, during the mid-1990s. 745 families participated (52% male children; 56% African American; 30% Latino, and 15% White non-Hispanic) and half were randomly selected to receive New Hope benefits, which included earnings supplements, job search assistance, and child and health care subsidies for three years. Importantly, effects on youths’ future orientation were found eight years after the program began (five years after benefits ended). The present study investigates what factors sustained these positive impacts over time. Results indicate that parental perceptions of reading performance mediate the effects of New Hope on youths’ cynicism about work. Additionally, parental perceptions of reading performance and youths’ educational expectations mediate the effects of New Hope on boys’ pessimism about future employment. These findings highlight the importance of youths’ educational development to their career-related thoughts and planning. PMID:22878938

Parents' participation in a work-based anti-poverty program can enhance their children's future orientation: understanding pathways of influence.

PubMed

Purtell, Kelly M; McLoyd, Vonnie C

2013-06-01

Planning and preparing for life after high school is a central developmental task of American adolescents, and may be even more critical for low-income youth who are less likely to attend a four year college. This study investigates factors that led to the effects of the New Hope Project, a work-based, anti-poverty program directed at parents on youths' career-related thoughts and planning. The New Hope project was implemented in Milwaukee, WI, during the mid-1990s. 745 families participated (52% male children; 56% African American; 30% Latino, and 15% White non-Hispanic) and half were randomly selected to receive New Hope benefits, which included earnings supplements, job search assistance, and child and health care subsidies for 3 years. Importantly, effects on youths' future orientation were found 8 years after the program began (5 years after benefits ended). The present study investigates what factors sustained these positive impacts over time. Results indicate that parental perceptions of reading performance mediate the effects of New Hope on youths' cynicism about work. Additionally, parental perceptions of reading performance and youths' educational expectations mediate the effects of New Hope on boys' pessimism about future employment. These findings highlight the importance of youths' educational development to their career-related thoughts and planning.

Project oriented klystron developments in Japan, China and India

NASA Astrophysics Data System (ADS)

Fukuda, Shigeki

2017-12-01

Modern accelerators are based on the rf technology and the klystron is the one of key components. Some special accelerator projects require their specified klystrons i.e., project-oriented klystrons. In this paper, project-oriented klystron developments for a decade in Japan are described. Related projects are ILC, cERL and SKEKB. Usually klystron is very expensive but has a finite life and needs to procure again. Trial to introduce the compatible tubes and have a competitive tender to reduce the cost is described. At the same time, since an efficiency improvement is one of the recent trend, such an attempt is also presented. International klystron collaboration among the Asian countries has been performed for a long time. In this paper, collaboration with China and India is introduced. Since topics are covered mainly author's experience, related counties described are limited.

The Effects of an Orientation Program on Quality of Life of Patients with Thalassemia: a Quasi-Experimental Study.

PubMed

Rafii, Zahra; Ahmadi, Fazlollah; Nourbakhsh, Sayed Mohamad Kazem; Hajizadeh, Ebrahim

2016-09-01

Introduction: Medical advances have improved life expectancy and survival of patients with thalassemia. However, as getting older, patients with thalassemia experience different complications which impair their quality of life. The aim of this study was to examine the effects of a nurse-implemented orientation program on quality of life in patients with thalassemia. Methods: A convenience sample of 55 patients with thalassemia were recruited in this quasi-experimental study. Patients were randomly allocated to control or experimental groups. A demographic questionnaire, Thalassemia quality of life questionnaire, and 36-item short form health survey were used for data collection before and one month after the intervention. In the intervention group, 1.5-month orientation program including of the three steps of inauguration, implementation, and closure was implemented, while the control group received routine care. The Chi-square, independent t-test and paired-samples t-test were used for data analysis by using SPSS ver.13 software. Results: The intervention and control group did not differ significantly from each other regarding demographic characteristics. Moreover, no significant difference was observed between the two groups regarding the quality of life scores after the implementation of orientation program. Conclusion: Implementing a short-term orientation program was not effective in enhancing the quality of life in patients with thalassemia; hence, developing long-term multimodal strategies may result in better improvement.

Neuroscience Investigations: An Overview of Studies Conducted

NASA Technical Reports Server (NTRS)

Reschke, Millard F.

1999-01-01

The neural processes that mediate human spatial orientation and adaptive changes occurring in response to the sensory rearrangement encountered during orbital flight are primarily studied through second and third order responses. In the Extended Duration Orbiter Medical Project (EDOMP) neuroscience investigations, the following were measured: (1) eye movements during acquisition of either static or moving visual targets, (2) postural and locomotor responses provoked by unexpected movement of the support surface, changes in the interaction of visual, proprioceptive, and vestibular information, changes in the major postural muscles via descending pathways, or changes in locomotor pathways, and (3) verbal reports of perceived self-orientation and self-motion which enhance and complement conclusions drawn from the analysis of oculomotor, postural, and locomotor responses. In spaceflight operations, spatial orientation can be defined as situational awareness, where crew member perception of attitude, position, or motion of the spacecraft or other objects in three-dimensional space, including orientation of one's own body, is congruent with actual physical events. Perception of spatial orientation is determined by integrating information from several sensory modalities. This involves higher levels of processing within the central nervous system that control eye movements, locomotion, and stable posture. Spaceflight operational problems occur when responses to the incorrectly perceived spatial orientation are compensatory in nature. Neuroscience investigations were conducted in conjunction with U. S. Space Shuttle flights to evaluate possible changes in the ability of an astronaut to land the Shuttle or effectively perform an emergency post-landing egress following microgravity adaptation during space flights of variable length. While the results of various sensory motor and spatial orientation tests could have an impact on future space flights, our knowledge of sensorimotor adaptation to spaceflight is limited, and the future application of effective countermeasures depends, in large part, on the results from appropriate neuroscience investigations. Therefore, the objective of the neuroscience investigations could have a negative effect on mission success. The Neuroscience Laboratory, Johnson Space Center (JSC), implemented three integrated Detailed Supplementary Objectives (DSO) designed to investigate spatial orientation and the associated compensatory responses as a part of the EDOMP. The four primary goals were (1) to establish a normative database of vestibular and associated sensory changes in response to spaceflight, (2) to determine the underlying etiology of neurovestibular and sensory motor changes associated with exposure to microgravity and the subsequent return to Earth, (3) to provide immediate feedback to spaceflight crews regarding potential countermeasures that could improve performance and safety during and after flight, and (4) to take under consideration appropriate designs for preflight, in-flight, and postflight countermeasures that could be implemented for future flights.

An Orientation & Leadership Training Handbook for International Students.

ERIC Educational Resources Information Center

Hansen, M. Eileen

This handbook provides guidance for implementing orientation activities for international students at Middlesex County College (MCC), in New Jersey. An introduction describes the development of MCC's orientation plan, indicating that, in response to problems faced by international students, the college developed an overnight orientation and…

Large-Scale Implementation of Formative Assessment Practices in an Examination-Oriented Culture

ERIC Educational Resources Information Center

Ratnam-Lim, Christina Tong Li; Tan, Kelvin Heng Kiat

2015-01-01

Singapore's education system has often been characterised as exam-oriented. This paper describes efforts ("windmills") made by the Government to constructively respond to the "winds of change" in the education system. A committee called the Primary Education Review and Implementation (PERI) Committee was appointed to study and…

Utilizing the "Plan, Do, Study, Act" Framework to Explore the Process of Curricular Assessment and Redesign in a Physical Therapy Education Program in Suriname.

PubMed

Audette, Jennifer Gail; Baldew, Se-Sergio; Chang, Tony C M S; de Vries, Jessica; Ho A Tham, Nancy; Janssen, Johanna; Vyt, Andre

2017-01-01

To describe how a multinational team worked together to transition a physical therapy (PT) educational program in Paramaribo, Suriname, from a Bachelor level to a Master of Science in Physical Therapy (MSPT) level. The team was made up of PT faculty from Anton De Kom Universiteit van Suriname (AdeKUS), the Flemish Interuniversity Council University Development Cooperation (VLIR-UOS) leadership, and Health Volunteers Overseas volunteers. In this case study, the process for curricular assessment, redesign, and upgrade is described retrospectively using a Plan, Do, Study, Act (PDSA) framework. PT educational programs in developing countries are eager for upgrade to meet international expectations and to better meet community health-care needs. An ongoing process which included baseline assessment of all aspects of the existing bachelor's program in PT, development of a plan for a MSPT, implementation of the master's program, and evaluation following implementation is described. Curricular assessment and upgrade in resource-limited countries requires the implementation of process-oriented methods. The PDSA process is a useful tool to explore curricular development. The international collaboration described in this paper provides an example of the diligence, consistency, and dedication required to see a project through and achieve success while providing adequate support to the host site. This project might provide valuable insights for those involved in curricular redesign in similar settings.

Applying value sensitive design (VSD) to wind turbines and wind parks: an exploration.

PubMed

Oosterlaken, Ilse

2015-04-01

Community acceptance still remains a challenge for wind energy projects. The most popular explanation for local opposition, the Not in My Backyard effect, has received fierce criticism in the past decade. Critics argue that opposition is not merely a matter of selfishness or ignorance, but that moral, ecological and aesthetic values play an important role. In order to better take such values into account, a more bottom-up, participatory decision process is usually proposed. Research on this topic focusses on either stakeholder motivations/attitudes, or their behavior during project implementation. This paper proposes a third research focus, namely the 'objects' which elicit certain behavioral responses and attitudes-the wind turbine and parks. More concretely, this paper explores Value Sensitive Design (VSD) as way to arrive at wind turbines and parks that better embed or reflect key values. After a critical discussion of the notion of acceptance versus acceptability and support, the paper discusses existing literature on ecology and aesthetics in relation to wind turbine/park design, which could serve as 'building blocks' of a more integral VSD approach of the topic. It also discusses the challenge of demarcating wind park projects as VSD projects. A further challenge is that VSD has been applied mainly at the level of technical artifacts, whereas wind parks can best be conceptualized as socio-technical system. This new application would therefore expand the current practice of VSD, and may as a consequence also lead to interesting new insights for the VSD community. The paper concludes that such an outcome-oriented approach of wind turbines and park is worth exploring further, as a supplement to rather than a replacement of the process-oriented approach that is promoted by the current literature on community acceptance of wind parks.

Full-field inspection of three-dimensional structures using steady-state acoustic wavenumber spectroscopy

NASA Astrophysics Data System (ADS)

Koskelo, Elise Anne C.; Flynn, Eric B.

2017-02-01

Inspection of and around joints, beams, and other three-dimensional structures is integral to practical nondestructive evaluation of large structures. Non-contact, scanning laser ultrasound techniques offer an automated means of physically accessing these regions. However, to realize the benefits of laser-scanning techniques, simultaneous inspection of multiple surfaces at different orientations to the scanner must not significantly degrade the signal level nor diminish the ability to distinguish defects from healthy geometric features. In this study, we evaluated the implementation of acoustic wavenumber spectroscopy for inspecting metal joints and crossbeams from interior angles. With this technique, we used a single-tone, steady-state, ultrasonic excitation to excite the joints via a single transducer attached to one surface. We then measured the full-field velocity responses using a scanning Laser Doppler vibrometer and produced maps of local wavenumber estimates. With the high signal level associated with steady-state excitation, scans could be performed at surface orientations of up to 45 degrees. We applied camera perspective projection transformations to remove the distortion in the scans due to a known projection angle, leading to a significant improvement in the local estimates of wavenumber. Projection leads to asymmetrical distortion in the wavenumber in one direction, making it possible to estimate view angle even when neither it nor the nominal wavenumber is known. Since plate thinning produces a purely symmetric increase in wavenumber, it also possible to independently estimate the degree of hidden corrosion. With a two-surface joint, using the wavenumber estimate maps, we were able to automatically calculate the orthographic projection component of each angled surface in the scan area.

Development and Implementation of a Surveillance Network System for Emerging Infectious Diseases in the Caribbean (ARICABA).

PubMed

Kim, Wongyu Lewis; Anneducharme, Chelsea; Bucher, Bernard Jean-Marie Philippe

2011-01-01

Dengue fever, including dengue hemorrhagic fever, has become a re-emerging public health threat in the Caribbean in the absence of a comprehensive regional surveillance system. In this deficiency, a project entitled ARICABA, strives to implement a pilot surveillance system across three islands: Martinique, St. Lucia, and Dominica. The aim of this project is to establish a network for epidemiological surveillance of infectious diseases, utilizing information and communication technology. This paper describes the system design and development strategies of a "network of networks" surveillance system for infectious diseases in the Caribbean. Also described are benefits, challenges, and limitations of this approach across the three island nations identified through direct observation, open-ended interviews, and email communications with an on-site IT consultant, key informants, and the project director. Identified core systems design of the ARICABA data warehouse include a disease monitoring system and a syndromic surveillance system. Three components comprise the development strategy: the data warehouse server, the geographical information system, and forecasting algorithms; these are recognized technical priorities of the surveillance system. A main benefit of the ARICABA surveillance system is improving responsiveness and representativeness of existing health systems through automated data collection, process, and transmission of information from various sources. Challenges include overcoming technology gaps between countries; real-time data collection points; multiple language support; and "component-oriented" development approaches.

Optimization of the Manufacturing Process of Conical Shell Structures Using Prepreg Laminatees

NASA Astrophysics Data System (ADS)

Khakimova, Regina; Zimmermann, Rolf; Burau, Florian; Siebert, Marc; Arbelo, Mariano; Castro, Saullo; Degenhardt, Richard

2014-06-01

The design and manufacture of an unstiffened composite conical structure which is a scaled-down version of the Ariane 5 Midlife Evolution Equipment Bay Structure is presented. For such benchmarking structures the fiber orientation error is critical and then the manufacturing process becomes a big challenge. The paper therefore is focused on the implementation of a tailoring study and on the manufacturing process. The conical structure will be tested to validate a new design approach.This study contributes to the European Union (EU) project DESICOS, whose aim is to develop less conservative design guidelines for imperfection sensitive thin-walled structures.

Calibrated work function mapping by Kelvin probe force microscopy

NASA Astrophysics Data System (ADS)

Fernández Garrillo, Pablo A.; Grévin, Benjamin; Chevalier, Nicolas; Borowik, Łukasz

2018-04-01

We propose and demonstrate the implementation of an alternative work function tip calibration procedure for Kelvin probe force microscopy under ultrahigh vacuum, using monocrystalline metallic materials with known crystallographic orientation as reference samples, instead of the often used highly oriented pyrolytic graphite calibration sample. The implementation of this protocol allows the acquisition of absolute and reproducible work function values, with an improved uncertainty with respect to unprepared highly oriented pyrolytic graphite-based protocols. The developed protocol allows the local investigation of absolute work function values over nanostructured samples and can be implemented in electronic structures and devices characterization as demonstrated over a nanostructured semiconductor sample presenting Al0.7Ga0.3As and GaAs layers with variable thickness. Additionally, using our protocol we find that the work function of annealed highly oriented pyrolytic graphite is equal to 4.6 ± 0.03 eV.

A Configurable Internet Telemetry Server / Remote Client System

NASA Astrophysics Data System (ADS)

Boyd, W. T.; Hopkins, A.; Abbott, M. J.; Girouard, F. R.

2000-05-01

We have created a general, object-oriented software framework in Java for remote viewing of telemetry over the Internet. The general system consists of a data server and a remote client that can be extended by any project that uses telemetry to implement a remote telemetry viewer. We have implemented a system that serves live telemetry from NASA's Extreme Ultraviolet Explorer satellite and a client that can display the telemetry at a remote location. An authenticated user may run a standalone graphical or text-based client, or an applet on a web page, to view EUVE telemetry. In the case of the GUI client, a user can build displays to his/her own specifications using a GUI view-building tool. This work was supported by grants NCC2-947 and NCC2-966 from NASA Ames Research Center and grant JPL-960684 from NASA Jet Propulsion Laboratory.

Quality control and quality assurance plan for bridge channel-stability assessments in Massachusetts

USGS Publications Warehouse

Parker, Gene W.; Pinson, Harlow

1993-01-01

A quality control and quality assurance plan has been implemented as part of the Massachusetts bridge scour and channel-stability assessment program. This program is being conducted by the U.S. Geological Survey, Massachusetts-Rhode Island District, in cooperation with the Massachusetts Highway Department. Project personnel training, data-integrity verification, and new data-management technologies are being utilized in the channel-stability assessment process to improve current data-collection and management techniques. An automated data-collection procedure has been implemented to standardize channel-stability assessments on a regular basis within the State. An object-oriented data structure and new image management tools are used to produce a data base enabling management of multiple data object classes. Data will be reviewed by assessors and data base managers before being merged into a master bridge-scour data base, which includes automated data-verification routines.

Benefits and challenges in practice-oriented psychotherapy research in Germany: the TK and the QS-PSY-BAY projects of quality assurance in outpatient psychotherapy.

PubMed

Strauss, Bernhard Michael; Lutz, Wolfgang; Steffanowski, Andres; Wittmann, Werner W; Boehnke, Jan R; Rubel, Julian; Scheidt, Carl E; Caspar, Franz; Vogel, Heiner; Altmann, Uwe; Steyer, Rolf; Zimmermann, Anna; Bruckmayer, Ellen; von Heymann, Friedrich; Kramer, Dietmar; Kirchmann, Helmut

2015-01-01

Two patient-focused long-term research projects performed in the German outpatient psychotherapy system are focused on in this article. The TK (Techniker Krankenkasse) project is the first study to evaluate a quality assurance and feedback system with regard to its practical feasibility in German routine care. The other study ("Quality Assurance in Outpatient Psychotherapy in Bavaria"; QS-PSY-BAY) was designed to test a new approach for quality assurance in outpatient psychotherapy using electronic documentation of patient characteristics and outcome parameters. In addition this project provides the opportunity to analyze data on health-related costs for the patients undergoing outpatient psychotherapy. Both projects and their results indicating high effect sizes are briefly described. From the perspectives of the research teams, advisory boards and other stakeholders, the experiences with these projects are discussed focusing on obstacles, challenges, difficulties, and benefits in developing and implementing the studies. The triangle collaboration of therapists, researchers, and health insurance companies/health service institutions turned out to be fruitful in both studies. Despite some controversies between the partners the experiences indicate the importance of practiced-research collaborations to provide relevant information about the delivery of outpatient psychotherapy in the health system.

Intellectual Production Supervision Perform based on RFID Smart Electricity Meter

NASA Astrophysics Data System (ADS)

Chen, Xiangqun; Huang, Rui; Shen, Liman; chen, Hao; Xiong, Dezhi; Xiao, Xiangqi; Liu, Mouhai; Xu, Renheng

2018-03-01

This topic develops the RFID intelligent electricity meter production supervision project management system. The system is designed for energy meter production supervision in the management of the project schedule, quality and cost information management requirements in RFID intelligent power, and provide quantitative information more comprehensive, timely and accurate for supervision engineer and project manager management decisions, and to provide technical information for the product manufacturing stage file. From the angle of scheme analysis, design, implementation and test, the system development of production supervision project management system for RFID smart meter project is discussed. Focus on the development of the system, combined with the main business application and management mode at this stage, focuses on the energy meter to monitor progress information, quality information and cost based information on RFID intelligent power management function. The paper introduces the design scheme of the system, the overall client / server architecture, client oriented graphical user interface universal, complete the supervision of project management and interactive transaction information display, the server system of realizing the main program. The system is programmed with C# language and.NET operating environment, and the client and server platforms use Windows operating system, and the database server software uses Oracle. The overall platform supports mainstream information and standards and has good scalability.

Proposal for fulfilling strategic objectives of the U.S. Roadmap for national action on clinical decision support through a service-oriented architecture leveraging HL7 services.

PubMed

Kawamoto, Kensaku; Lobach, David F

2007-01-01

Despite their demonstrated effectiveness, clinical decision support (CDS) systems are not widely used within the U.S. The Roadmap for National Action on Clinical Decision Support, published in June 2006 by the American Medical Informatics Association, identifies six strategic objectives for achieving widespread adoption of effective CDS capabilities. In this manuscript, we propose a Service-Oriented Architecture (SOA) for CDS that facilitates achievement of these six objectives. Within the proposed framework, CDS capabilities are implemented through the orchestration of independent software services whose interfaces are being standardized by Health Level 7 and the Object Management Group through their joint Healthcare Services Specification Project (HSSP). Core services within this framework include the HSSP Decision Support Service, the HSSP Common Terminology Service, and the HSSP Retrieve, Locate, and Update Service. Our experiences, and those of others, indicate that the proposed SOA approach to CDS could enable the widespread adoption of effective CDS within the U.S. health care system.

[Reviewing the shared strategy health bill: further measures to meet the structural challenges of the health system].

PubMed

Lombrail, Pierre

2014-01-01

This article reviews the draft health bill entitled "Federate health professionals around a shared strategy", currently submitted for consultation in the context of the national health strategy in France. This bill comprises innovative measures for prevention and health care in France. In particular, it is designed to develop, strengthen and structure the prevention sector, especially in children and young people. It is also designed to organize health care trajectories and acquire the necessary tools to promote their development. However, the bill sometimes presents limited ambitions in terms of objectives and means. In particular, the project comprises almost none of the necessary actions on the social determinants of health. Overall, the orientations of this bill represent a first major step towards a health policy in France beyond the field of health care. However, we must remain vigilant concerning application of these orientations in the process of elaboration of the bill and its related regulations, and implementation of the national health strategy.

Geometric phase topology in weak measurement

NASA Astrophysics Data System (ADS)

Samlan, C. T.; Viswanathan, Nirmal K.

2017-12-01

The geometric phase visualization proposed by Bhandari (R Bhandari 1997 Phys. Rep. 281 1-64) in the ellipticity-ellipse orientation basis of the polarization ellipse of light is implemented to understand the geometric aspects of weak measurement. The weak interaction of a pre-selected state, acheived via spin-Hall effect of light (SHEL), results in a spread in the polarization ellipticity (η) or ellipse orientation (χ) depending on the resulting spatial or angular shift, respectively. The post-selection leads to the projection of the η spread in the complementary χ basis results in the appearance of a geometric phase with helical phase topology in the η - χ parameter space. By representing the weak measurement on the Poincaré sphere and using Jones calculus, the complex weak value and the geometric phase topology are obtained. This deeper understanding of the weak measurement process enabled us to explore the techniques’ capabilities maximally, as demonstrated via SHEL in two examples—external reflection at glass-air interface and transmission through a tilted half-wave plate.

A SOA-based approach to geographical data sharing

NASA Astrophysics Data System (ADS)

Li, Zonghua; Peng, Mingjun; Fan, Wei

2009-10-01

In the last few years, large volumes of spatial data have been available in different government departments in China, but these data are mainly used within these departments. With the e-government project initiated, spatial data sharing become more and more necessary. Currently, the Web has been used not only for document searching but also for the provision and use of services, known as Web services, which are published in a directory and may be automatically discovered by software agents. Particularly in the spatial domain, the possibility of accessing these large spatial datasets via Web services has motivated research into the new field of Spatial Data Infrastructure (SDI) implemented using service-oriented architecture. In this paper a Service-Oriented Architecture (SOA) based Geographical Information Systems (GIS) is proposed, and a prototype system is deployed based on Open Geospatial Consortium (OGC) standard in Wuhan, China, thus that all the departments authorized can access the spatial data within the government intranet, and also these spatial data can be easily integrated into kinds of applications.

Analysis of Italian regulations on pathways of care for patients in a vegetative or minimally conscious state

PubMed Central

Sattin, Davide; De Torres, Laura; Dolce, Giuliano; Arcuri, Francesco; Estraneo, Anna; Cardinale, Viviana; Piperno, Roberto; Zavatta, Elena; Formisano, Rita; D’Ippolito, Mariagrazia; Vassallo, Claudio; Dessi, Barbara; Lamberti, Gianfranco; Antoniono, Elena; Lanzillotti, Crocifissa; Navarro, Jorge; Bramanti, Placido; Marino, Silvia; Zampolini, Mauro; Scarponi, Federico; Avesani, Renato; Salvi, Luca; Ferro, Salvatore; Mazza, Luigi; Fogar, Paolo; Feller, Sandro; De Nigris, Fulvio; Martinuzzi, Andrea; Buffoni, Mara; Pessina, Adriano; Corsico, Paolo; Leonardi, Matilde

2017-01-01

Summary Different rehabilitation models for persons diagnosed with disorders of consciousness have been proposed in Europe during the last decade. In Italy, the Ministry of Health has defined a national healthcare model, although, to date, there is a lack of information on how this has been implemented at regional level. The INCARICO project collected information on different regional regulations, analysing ethical aspects and mapping care facilities (numbers of beds and medical units) in eleven regional territories. The researchers found a total of 106 laws; differences emerged both between regions and versus the national model, showing that patients with the same diagnosis may follow different pathways of care. An ongoing cultural shift from a treatment-oriented medical approach towards a care-oriented integrated biopsychosocial approach was found in all the welfare and healthcare systems analysed. Future studies are needed to explore the relationship between healthcare systems and the quality of services provided. PMID:29042005

Home health nursing care agenda based on health policy in Korea.

PubMed

Ryu, Hosihn; An, Jiyoung; Koabyashi, Mia

2005-06-01

Home health nursing care (HHNC) in Korea has taken on an important role under the mandate of the national health care system since 2000. This program was developed to verify the possibility of early discharge of hospitalized patients and cost containment through a research and development project that was conducted with the government from 1994 to 1999. The process of development of HHNC provided an opportunity to realize the advancement and changes in the system into a consumer-focused structure. This is an important turning point for the Korean health care system that suggests certain possibilities for building a foundation for further changes in the service delivery structure. The structure, which had been limited to a supplier-oriented model, is moving to a consumer-oriented structure. Accordingly, the major function and role of nursing policy makers in Korea is to develop an agenda and alternatives for policy-making in a systematic manner and to present implementation strategies clearly.

Student goal orientation in learning inquiry skills with modifiable software advisors

NASA Astrophysics Data System (ADS)

Shimoda, Todd A.; White, Barbara Y.; Frederiksen, John R.

2002-03-01

A computer support environment (SCI-WISE) for learning and doing science inquiry projects was designed. SCI-WISE incorporates software advisors that give general advice about a skill such as hypothesizing. By giving general advice (rather than step-by-step procedures), the system is intended to help students conduct experiments that are more epistemologically authentic. Also, students using SCI-WISE can select the type of advice the advisors give and when they give advice, as well as modify the advisors' knowledge bases. The system is based partly on a theoretical framework of levels of agency and goal orientation. This framework assumes that giving students higher levels of agency facilitates higher-level goal orientations (such as mastery or knowledge building as opposed to task completion) that in turn produce higher levels of competence. A study of sixth grade science students was conducted. Students took a pretest questionnaire that measured their goal orientations for science projects and their inquiry skills. The students worked in pairs on an open-ended inquiry project that requires complex reasoning about human memory. The students used one of two versions of SCI-WISE - one that was modifiable and one that was not. After finishing the project, the students took a posttest questionnaire similar to the pretest, and evaluated the version of the system they used. The main results showed that (a) there was no correlation of goal orientation with grade point average, (b) knowledge-oriented students using the modifiable version tended to rate SCI-WISE more helpful than task-oriented students, and (c) knowledge-oriented pairs using the nonmodifiable version tended to have higher posttest inquiry skills scores than other pair types.

Exploring Teacher Professional Learning for Future-Oriented Schooling: Working Paper 1 from the Back to the Future Project

ERIC Educational Resources Information Center

Gilbert, Jane; Bull, Ally

2014-01-01

This working paper sets out some of the early findings from a pilot project to explore the qualities that future-oriented teachers might need and how those qualities might be developed. The work began under a New Zealand Council for Educational Research (NZCER) project called Back to the Future and is now part of a Teaching & Learning Research…

Structure determination of a key intermediate of the enantioselective Pd complex catalyzed allylic substitution reaction

PubMed

Junker; Reif; Steinhagen; Junker; Felli; Reggelin; Griesinger

2000-09-01

The structure of a catalytic intermediate with important implications for the interpretation of the stereochemical outcome of the palladium complex catalyzed allylic substitution with phosphino-oxazoline (PHOX) ligands is determined by liquid state NMR. The complex displays a novel structure that is highly distorted compared with other palladium eta2-olefin complexes known so far. The structure has been determined from nuclear overhauser data (NOE), scalar coupling constants, and long range projection angle restraints derived from dipole dipole cross-correlated relaxation of multiple quantum coherence. The latter restraints have been implemented into a distance geometry protocol. The projection angle restraints yield a higher precision in the determination of the relative orientation of the two molecular moieties and are essential to provide an exact structural definition of the olefinic part of the catalytic intermediate with respect to the ligand.

Application of remote sensing data to surveys of the Alaskan environment

NASA Technical Reports Server (NTRS)

Belon, A. E.; Miller, J. M.

1974-01-01

Coupling of satellite data to resource management problems in Alaska is implemented through feasibility studies of applicability of Landsat data to specific environmental surveys in ecology, agriculture, hydrology, wildlife management, oceanography, geology, etc.; and using the results of these studies to extend the benefits of satellite data applications to the operational needs of mission-oriented agencies of federal, state, and regional governments, as well as private industry. Activities designed to encourage the participation of users in the Landsat program at levels most appropriate to the users' interests are described and include: observation, coordination, and information exchange; training courses and workshops; data exchange; consulting services; data processing services; user participation in University research projects; and university participation in the operational projects of user agencies. Progress in these areas is reported. The effectiveness of this broad-based approach in overcoming the initial apprehensiveness of users is demonstrated.

Implementation of Process Oriented Guided Inquiry Learning (POGIL) in Engineering

ERIC Educational Resources Information Center

Douglas, Elliot P.; Chiu, Chu-Chuan

2013-01-01

This paper describes implementation and testing of an active learning, team-based pedagogical approach to instruction in engineering. This pedagogy has been termed Process Oriented Guided Inquiry Learning (POGIL), and is based upon the learning cycle model. Rather than sitting in traditional lectures, students work in teams to complete worksheets…

Developing preceptorship through action research: Part 1.

PubMed

Hilli, Yvonne; Melender, Hanna-Leena

2015-09-01

Clinical preception in practice plays a significant role in both registered and practical nurse studies. As such, the cooperation between the faculty and working life is important to narrow the theory-practice gap, with emphasis being placed on a student-oriented approach promoting self-direction and lifelong learning. The aim of this project was to develop the preceptorship at five different units within the health-care sector in western Finland by implementing an action research (AR) approach. This article is the first of a two-part article on the project, focusing on a cultural analysis and the development of preception models conducted within the project. The five units participating in the study were the following: a long-term care ward in the community, a ward for people with dementia, a geriatric ward, a medical ward and a surgical ward representing specialised care. The starting point of the study was a cultural analysis, which was made in all the five units to obtain a 'bottom-up' perspective. In each of the five units 3-5 nurses were appointed to become members of the core groups. This meant that all the units would start from the perspective of their own working environment when creating a preception model that would fit into their particular workplace. During this process, the participants received continuous support from the researchers. Several workshops and seminars were also arranged to further support the core groups and staff. The models were implemented and tested during the academic year 2010-2011 followed by an evaluation of the project. The evaluation results will be presented in the second part of the two-part article. The project showed that reflective practice and critical thinking can be improved through an AR approach. © 2015 Nordic College of Caring Science.

PNNL Technical Support to The Implementation of EMTA and EMTA-NLA Models in Autodesk® Moldflow® Packages

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nguyen, Ba Nghiep; Wang, Jin

2012-12-01

Under the Predictive Engineering effort, PNNL developed linear and nonlinear property prediction models for long-fiber thermoplastics (LFTs). These models were implemented in PNNL’s EMTA and EMTA-NLA codes. While EMTA is a standalone software for the computation of the composites thermoelastic properties, EMTA-NLA presents a series of nonlinear models implemented in ABAQUS® via user subroutines for structural analyses. In all these models, it is assumed that the fibers are linear elastic while the matrix material can exhibit a linear or typical nonlinear behavior depending on the loading prescribed to the composite. The key idea is to model the constitutive behavior ofmore » the matrix material and then to use an Eshelby-Mori-Tanaka approach (EMTA) combined with numerical techniques for fiber length and orientation distributions to determine the behavior of the as-formed composite. The basic property prediction models of EMTA and EMTA-NLA have been subject for implementation in the Autodesk® Moldflow® software packages. These models are the elastic stiffness model accounting for fiber length and orientation distributions, the fiber/matrix interface debonding model, and the elastic-plastic models. The PNNL elastic-plastic models for LFTs describes the composite nonlinear stress-strain response up to failure by an elastic-plastic formulation associated with either a micromechanical criterion to predict failure or a continuum damage mechanics formulation coupling damage to plasticity. All the models account for fiber length and orientation distributions as well as fiber/matrix debonding that can occur at any stage of loading. In an effort to transfer the technologies developed under the Predictive Engineering project to the American automotive and plastics industries, PNNL has obtained the approval of the DOE Office of Vehicle Technologies to provide Autodesk, Inc. with the technical support for the implementation of the basic property prediction models of EMTA and EMTA-NLA in the Autodesk® Moldflow® packages. This report summarizes the recent results from Autodesk Simulation Moldlow Insight (ASMI) analyses using the EMTA models and EMTA-NLA/ABAQUS® analyses for further assessment of the EMTA-NLA models to support their implementation in Autodesk Moldflow Structural Alliance (AMSA). PNNL’s technical support to Autodesk, Inc. included (i) providing the theoretical property prediction models as described in published journal articles and reports, (ii) providing explanations of these models and computational procedure, (iii) providing the necessary LFT data for process simulations and property predictions, and (iv) performing ABAQUS/EMTA-NLA analyses to further assess and illustrate the models for selected LFT materials.« less

Large project experiences with object-oriented methods and reuse

NASA Technical Reports Server (NTRS)

Wessale, William; Reifer, Donald J.; Weller, David

1992-01-01

The SSVTF (Space Station Verification and Training Facility) project is completing the Preliminary Design Review of a large software development using object-oriented methods and systematic reuse. An incremental developmental lifecycle was tailored to provide early feedback and guidance on methods and products, with repeated attention to reuse. Object oriented methods were formally taught and supported by realistic examples. Reuse was readily accepted and planned by the developers. Schedule and budget issues were handled by agreements and work sharing arranged by the developers.

Towards an organisation-wide process-oriented organisation of care: A literature review

PubMed Central

2011-01-01

Background Many hospitals have taken actions to make care delivery for specific patient groups more process-oriented, but struggle with the question how to deal with process orientation at hospital level. The aim of this study is to report and discuss the experiences of hospitals with implementing process-oriented organisation designs in order to derive lessons for future transitions and research. Methods A literature review of English language articles on organisation-wide process-oriented redesigns, published between January 1998 and May 2009, was performed. Results Of 329 abstracts identified, 10 articles were included in the study. These articles described process-oriented redesigns of five hospitals. Four hospitals tried to become process-oriented by the implementation of coordination measures, and one by organisational restructuring. The adoption of the coordination mechanism approach was particularly constrained by the functional structure of hospitals. Other factors that hampered the redesigns in general were the limited applicability of and unfamiliarity with process improvement techniques. Conclusions Due to the limitations of the evidence, it is not known which approach, implementation of coordination measures or organisational restructuring (with additional coordination measures), produces the best results in which situation. Therefore, more research is needed. For this research, the use of qualitative methods in addition to quantitative measures is recommended to contribute to a better understanding of preconditions and contingencies for an effective application of approaches to become process-oriented. Hospitals are advised to take the factors for failure described into account and to take suitable actions to counteract these obstacles on their way to become process-oriented organisations. PMID:21247491

Towards an organisation-wide process-oriented organisation of care: a literature review.

PubMed

Vos, Leti; Chalmers, Sarah E; Dückers, Michel La; Groenewegen, Peter P; Wagner, Cordula; van Merode, Godefridus G

2011-01-19

Many hospitals have taken actions to make care delivery for specific patient groups more process-oriented, but struggle with the question how to deal with process orientation at hospital level. The aim of this study is to report and discuss the experiences of hospitals with implementing process-oriented organisation designs in order to derive lessons for future transitions and research. A literature review of English language articles on organisation-wide process-oriented redesigns, published between January 1998 and May 2009, was performed. Of 329 abstracts identified, 10 articles were included in the study. These articles described process-oriented redesigns of five hospitals. Four hospitals tried to become process-oriented by the implementation of coordination measures, and one by organisational restructuring. The adoption of the coordination mechanism approach was particularly constrained by the functional structure of hospitals. Other factors that hampered the redesigns in general were the limited applicability of and unfamiliarity with process improvement techniques. Due to the limitations of the evidence, it is not known which approach, implementation of coordination measures or organisational restructuring (with additional coordination measures), produces the best results in which situation. Therefore, more research is needed. For this research, the use of qualitative methods in addition to quantitative measures is recommended to contribute to a better understanding of preconditions and contingencies for an effective application of approaches to become process-oriented. Hospitals are advised to take the factors for failure described into account and to take suitable actions to counteract these obstacles on their way to become process-oriented organisations.

Exploring Possibilities for Transforming Established Subscription-based Scientific Journals into Open Access Journals. Present Situation, Transformation Criteria, and Exemplary Implementation within Trans-O-MIM.

PubMed

Haux, Reinhold; Kuballa, Stefanie; Schulze, Mareike; Böhm, Claudia; Gefeller, Olaf; Haaf, Jan; Henning, Peter; Mielke, Corinna; Niggemann, Florian; Schürg, Andrea; Bergemann, Dieter

2016-12-07

Based on today's information and communication technologies the open access paradigm has become an important approach for adequately communicating new scientific knowledge. Summarizing the present situation for journal transformation. Presenting criteria for adequate transformation as well as a specific approach for it. Describing our exemplary implementation of such a journal transformation. Studying the respective literature as well as discussing this topic in various discussion groups and meetings (primarily of editors and publishers, but also of authors and readers), with long term experience as editors and /or publishers of scientific publications as prerequisite. There is a clear will, particularly of political and funding organizations, towards open access publishing. In spite of this, there is still a large amount of scientific knowledge, being communicated through subscription-based journals. For successfully transforming such journals into open access, sixteen criteria for a goal-oriented, stepwise, sustainable, and fair transformation are suggested. The Tandem Model as transformation approach is introduced. Our exemplary implementation is done in the Trans-O-MIM project. It is exploring strategies, models and evaluation metrics for journal transformation. As instance the journal Methods of Information in Medicine will apply the Tandem Model from 2017 onwards. Within Trans-O-MIM we will reach at least nine of the sixteen criteria for adequate transformation. It was positive to implement Trans-O-MIM as international research project. After first steps for transforming Methods have successfully been made, challenges will remain, among others, in identifying appropriate incentives for open access publishing in order to support its transformation.

Accord No. 00243, 9 February 1988.

PubMed

1988-01-01

This Accord sets forth the Regulations of the Organic Functions of the Ministry of Social Welfare of Ecuador. The following are among the Departments of the Ministry: 1) on the advisory level, the National Council of Minors; 2) on the operative level, the National Directorate for the Protection of Minors, consisting of the Department for the Protection of Minors, the Department for the Rehabilitation of Minors, the Department of Integral Health for Minors, and the Legal-Social Department for the protection of Minors; and a National Directorate of Women, consisting of a Technical Department and a Department of Promotion and Development. The functions of the National Directorate of Women are as follows: 1) to promote the participation of women and women's organizations, encouraging their incorporation into the socioeconomic development of the country; 2) to encourage and orient on a national level the creation of women's groups; 3) to advise and coordinate in the state and private sector the execution of programs and projects designed to improve the condition of Ecuadoran women; 4) to direct and execute programs and projects for women; 5) to promote the strengthening of women's organizations striving to obtain self-management for women and raise their standards of living; 6) to give opinions on the approval of statutes of women's organizations; 7) to supervise the implementation of programs and projects undertaken by organizations that receive contributions from the Ministry; 8) to direct and supervise the organization of a register of information related to women's organizations; and 9) to promote the dissemination of information for the implementation of programs and projects of the Directorate relating to women's organizations. full text

Leveraging object-oriented development at Ames

NASA Technical Reports Server (NTRS)

Wenneson, Greg; Connell, John

1994-01-01

This paper presents lessons learned by the Software Engineering Process Group (SEPG) from results of supporting two projects at NASA Ames using an Object Oriented Rapid Prototyping (OORP) approach supported by a full featured visual development environment. Supplemental lessons learned from a large project in progress and a requirements definition are also incorporated. The paper demonstrates how productivity gains can be made by leveraging the developer with a rich development environment, correct and early requirements definition using rapid prototyping, and earlier and better effort estimation and software sizing through object-oriented methods and metrics. Although the individual elements of OO methods, RP approach and OO metrics had been used on other separate projects, the reported projects were the first integrated usage supported by a rich development environment. Overall the approach used was twice as productive (measured by hours per OO Unit) as a C++ development.

Design of object-oriented distributed simulation classes

NASA Technical Reports Server (NTRS)

Schoeffler, James D. (Principal Investigator)

1995-01-01

Distributed simulation of aircraft engines as part of a computer aided design package is being developed by NASA Lewis Research Center for the aircraft industry. The project is called NPSS, an acronym for 'Numerical Propulsion Simulation System'. NPSS is a flexible object-oriented simulation of aircraft engines requiring high computing speed. It is desirable to run the simulation on a distributed computer system with multiple processors executing portions of the simulation in parallel. The purpose of this research was to investigate object-oriented structures such that individual objects could be distributed. The set of classes used in the simulation must be designed to facilitate parallel computation. Since the portions of the simulation carried out in parallel are not independent of one another, there is the need for communication among the parallel executing processors which in turn implies need for their synchronization. Communication and synchronization can lead to decreased throughput as parallel processors wait for data or synchronization signals from other processors. As a result of this research, the following have been accomplished. The design and implementation of a set of simulation classes which result in a distributed simulation control program have been completed. The design is based upon MIT 'Actor' model of a concurrent object and uses 'connectors' to structure dynamic connections between simulation components. Connectors may be dynamically created according to the distribution of objects among machines at execution time without any programming changes. Measurements of the basic performance have been carried out with the result that communication overhead of the distributed design is swamped by the computation time of modules unless modules have very short execution times per iteration or time step. An analytical performance model based upon queuing network theory has been designed and implemented. Its application to realistic configurations has not been carried out.

Design of Object-Oriented Distributed Simulation Classes

NASA Technical Reports Server (NTRS)

Schoeffler, James D.

1995-01-01

Distributed simulation of aircraft engines as part of a computer aided design package being developed by NASA Lewis Research Center for the aircraft industry. The project is called NPSS, an acronym for "Numerical Propulsion Simulation System". NPSS is a flexible object-oriented simulation of aircraft engines requiring high computing speed. It is desirable to run the simulation on a distributed computer system with multiple processors executing portions of the simulation in parallel. The purpose of this research was to investigate object-oriented structures such that individual objects could be distributed. The set of classes used in the simulation must be designed to facilitate parallel computation. Since the portions of the simulation carried out in parallel are not independent of one another, there is the need for communication among the parallel executing processors which in turn implies need for their synchronization. Communication and synchronization can lead to decreased throughput as parallel processors wait for data or synchronization signals from other processors. As a result of this research, the following have been accomplished. The design and implementation of a set of simulation classes which result in a distributed simulation control program have been completed. The design is based upon MIT "Actor" model of a concurrent object and uses "connectors" to structure dynamic connections between simulation components. Connectors may be dynamically created according to the distribution of objects among machines at execution time without any programming changes. Measurements of the basic performance have been carried out with the result that communication overhead of the distributed design is swamped by the computation time of modules unless modules have very short execution times per iteration or time step. An analytical performance model based upon queuing network theory has been designed and implemented. Its application to realistic configurations has not been carried out.

Background Oriented Schlieren Implementation in a Jet-Surface Interaction Test

NASA Technical Reports Server (NTRS)

Clem, Michelle M.; Brown, Clifford A.; Fagan, Amy

2013-01-01

Many current and future aircraft designs rely on the wing or other aircraft surfaces to shield the engine noise from observers on the ground. However the available data regarding how a planar surface interacts with a jet to shield and/or enhance the jet noise are currently limited. Therefore, the Jet-Surface Interaction Tests supported by NASA's Fundamental Aeronautics Program's Fixed Wing Project were undertaken to supply experimental data covering a wide range of surface geometries and positions interacting with high-speed jet flows in order to support the development of noise prediction methods. Phase 1 of the Test was conducted in the Aero-Acoustic Propulsion Laboratory at NASA Glenn Research Center and consisted of validating noise prediction schemes for a round nozzle interacting with a planar surface. Phased array data and far-field acoustic data were collected for both the shielded and reflected sides of the surface. Phase 1 results showed that the broadband shock noise was greatly reduced by the surface when the jet was operated at the over-expanded condition, however, it was unclear whether this reduction was due a change in the shock cell structure by the surface. In the present study, Background Oriented Schlieren is implemented in Phase 2 of the Jet-Surface Interaction Tests to investigate whether the planar surface interacts with the high-speed jet ow to change the shock cell structure. Background Oriented Schlieren data are acquired for under-expanded, ideally-expanded, and over-expanded ow regimes for multiple axial and radial positions of the surface at three different plate lengths. These data are analyzed with far-field noise measurements to relate the shock cell structure to the broadband shock noise produced by a jet near a surface.

Common Misconceptions About Service-Oriented Architecture

DTIC Science & Technology

2007-11-01

addition, the architect(s) must make decisions on how services are implemented. Service implementations may involve developing new software , wrapping a...legacy software system, incor- porating services provided by third par- ties, or a combination of these options. Information about the quality attrib...temperature. However, there 28 CROSSTALK The Journal of Defense Software Engineering November 2007 Common Misconceptions About Service -Oriented

Learning to "Swim" with the Experts: Experiences of Two Patient Co-Investigators for a Project Funded by the Patient-Centered Outcomes Research Institute.

PubMed

Robbins, Michele; Tufte, Janice; Hsu, Clarissa

2016-01-01

The Patient-Centered Outcomes Research Institute (PCORI), established in 2010, launched a new model of incorporating stakeholder perspectives into health care research. To ensure that PCORI-funded studies address issues important to health care consumers, all projects must fully involve patients and other stakeholders in every step of the research process: from planning and design to implementation and dissemination of results.As members of the first cohort of PCORI-funded researchers, our team was on the forefront of developing new approaches to engaging patients in research. One innovation we pioneered was the creation of a "patient co-investigator" role for two nonscientists who were recruited to be active members of the research team throughout the project. This commentary, based on our experiences, aims to help other research teams to 1) understand how to effectively collaborate with stakeholder team members such as patients; 2) anticipate possible challenges; and 3) offer tools for the orientation, training, and integration of patients into a scientific team. Written from the perspective of two PCORI patient co-investigators, our commentary provides lessons learned and recommendations about incorporating nonscientists into research teams.Specifically, we suggest recruiting people with a record of relevant volunteer experience and commitment; establishing a formal application process that provides candidates with details about expectations and responsibilities; and providing comprehensive orientation with ongoing training, encouragement, and support. We hope the points in this commentary help research teams that are incorporating patient co-investigators move toward a positive and productive experience.

Evaluating the effectiveness of a multifaceted, multilevel continuous quality improvement program in primary health care: developing a realist theory of change

PubMed Central

2013-01-01

Background Variation in effectiveness of continuous quality improvement (CQI) interventions between services is commonly reported, but with little explanation of how contextual and other factors may interact to produce this variation. Therefore, there is scant information available on which policy makers can draw to inform effective implementation in different settings. In this paper, we explore how patterns of change in delivery of services may have been achieved in a diverse range of health centers participating in a wide-scale program to achieve improvements in quality of care for Indigenous Australians. Methods We elicited key informants’ interpretations of factors explaining patterns of change in delivery of guideline-scheduled services over three or more years of a wide-scale CQI project, and inductively analyzed these interpretations to propose fine-grained realist hypotheses about what works for whom and in what circumstances. Data were derived from annual clinical audits from 36 health centers operating in diverse settings, quarterly project monitoring reports, and workshops with 12 key informants who had key roles in project implementation. We abstracted potential context-mechanism-outcome configurations from the data, and based on these, identified potential program-strengthening strategies. Results Several context-specific, mechanism-based explanations for effectiveness of this CQI project were identified. These were collective valuing of clinical data for improvement purposes; collective efficacy; and organizational change towards a population health orientation. Health centers with strong central management of CQI, and those in which CQI efforts were more dependent on local health center initiative and were adapted to resonate with local priorities were both favorable contexts for collective valuing of clinical data. Where health centers had prior positive experiences of collaboration, effects appeared to be achieved at least partly through the mechanism of collective efficacy. Strong community linkages, staff ability to identify with patients, and staff having the skills and support to take broad ranging action, were favorable contexts for the mechanism of increased population health orientation. Conclusions Our study provides evidence to support strategies for program strengthening described in the literature, and extends the understanding of mechanisms through which strategies may be effective in achieving particular outcomes in different contexts. PMID:24098940

Marketing Wood Products: Unit L#4 Grade 6. Project COULD: Career Orientation Utilizing Language Development.

ERIC Educational Resources Information Center

Coos County Intermediate Education District, North Bend, OR.

Project COULD (Career Orientation Utilizing Language Development) was developed as a means of building skills, knowledges, and attitudes on elementary children's previously acquired backgrounds. Children learn to speak the grammar and vocabulary characteristic of the language heard most frequently at home and in the immediate environment. Each…

Marketing Fish: Unit F#4 Grade 6. Project COULD: Career Orientation Utilizing Language Development.

ERIC Educational Resources Information Center

Coos County Intermediate Education District, North Bend, OR.

Project COULD (Career Orientation Utilizing Language Development) was developed as a means of building skills, knowledges, and attitudes on elementary children's previously acquired backgrounds. Children learn to speak the grammar and vocabulary characteristic of the language heard most frequently at home and in the immediate environment. A series…

Harvesting Fish: Unit F#1 Grade 3. Project COULD: Career Orientation Utilizing Language Development.

ERIC Educational Resources Information Center

Coos County Intermediate Education District, North Bend, OR.

Project COULD (Career Orientation Utilizing Language Development) was developed as a means of building skills, knowledges, and attitudes on elementary children's previously acquired backgrounds. Children learn to speak the grammar and vocabulary characteristic of the language heard most frequently at home and in the immediate environment. A series…

Exploring Protein Structure and Dynamics through a Project-Oriented Biochemistry Laboratory Module

ERIC Educational Resources Information Center

Lipchock, James M.; Ginther, Patrick S.; Douglas, Bonnie B.; Bird, Kelly E.; Loria, J. Patrick

2017-01-01

Here, we present a 10-week project-oriented laboratory module designed to provide a course-based undergraduate research experience in biochemistry that emphasizes the importance of biomolecular structure and dynamics in enzyme function. This module explores the impact of mutagenesis on an important active site loop for a biomedically-relevant…

Fostering Teacher Development to a Tetrahedral Orientation in the Teaching of Chemistry

ERIC Educational Resources Information Center

Lewthwaite, Brian; Wiebe, Rick

2011-01-01

This paper reports on the initial outcomes from the end of the fourth year of a 5 year research and professional development project to improve chemistry teaching among three cohorts of chemistry teachers in Manitoba, Canada. The project responds to a new curriculum introduction advocating a tetrahedral orientation (Mahaffy, "Journal of…

Quarterly Update, January-March 1992

DTIC Science & Technology

1992-03-01

representations to support exploiting that commonality. The project used the Feature-Oriented Domain Analysis ( FODA ) method, developed by the project in 1990, in...9 FODA feature-oriented domain analysis ................................... 14 FTP file transfer protocol...concentrations, and product market share for 23 countries. Along with other SEI staff, members of the Rate Monotonic Analysis for Real-Time Systems (RMARTS

Incoming Leadership-Oriented Differences between Students in a Leadership Studies Course and a Team-Based Project Course

ERIC Educational Resources Information Center

Rosch, David M.; Collier, Daniel

2013-01-01

This study examined the incoming leadership-oriented differences between students (N = 166) enrolled in either an elective leadership studies course (n = 50) or an elective team-based engineering projects course (n = 116) to determine significant predictors of transformational leadership behavior. Participants completed measures of…

Harvesting Shellfish: Unit F#2 Grade 4. Project COULD: Career Orientation Utilizing Language Development.

ERIC Educational Resources Information Center

Coos County Intermediate Education District, North Bend, OR.

Project COULD (Career Orientation Utilizing Language Development) was developed as a means of building skills, knowledges, and attitudes on elementary children's previously acquired backgrounds. Children begin to speak the grammar and vocabulary characteristic of the language heard most frequently at home and in the immediate environment. A series…

Seafood Processing: Unit F#3 Grade 5. Project COULD: Career Orientation Utilizing Language Development.

ERIC Educational Resources Information Center

Coos County Intermediate Education District, North Bend, OR.

Project COULD (Career Orientation Utilizing Language Development) was developed as a means of building skills, knowledges, and attitudes on elementary children's previously acquired backgrounds. Children learn to speak the grammar and vocabulary characteristic of the language heard most frequently at home and in the immediate environment. A series…

Goal Orientations and Metacognitive Skills of Normal Technical and Normal Academic Students on Project Work

ERIC Educational Resources Information Center

Ee, J.; Wang, C.; Koh, C.; Tan, O.; Liu, W.

2009-01-01

In 2000, the Singapore Ministry of Education launched Project Work (PW) to encourage the application of knowledge across disciplines, and to develop thinking, communication, collaboration and metacognitive skills. This preliminary findings of a large scale study examines the role of goal orientations (achievement goals and social goals) in…

Implementation of an Object-Oriented Flight Simulator D.C. Electrical System on a Hypercube Architecture

DTIC Science & Technology

1991-12-01

abstract data type is, what an object-oriented design is and how to apply "software engineering" principles to the design of both of them. I owe a great... Program (ASVP), a research and development effort by two aerospace contractors to redesign and implement subsets of two existing flight simulators in...effort addresses how to implement a simulator designed using the SEI OOD Paradigm on a distributed, parallel, multiple instruction, multiple data (MIMD

The 3D Elevation Program national indexing scheme

USGS Publications Warehouse

Thatcher, Cindy A.; Heidemann, Hans Karl; Stoker, Jason M.; Eldridge, Diane F.

2017-11-02

The 3D Elevation Program (3DEP) of the U.S. Geological Survey (USGS) acquires high-resolution elevation data for the Nation. This program has been operating under an opportunity-oriented approach, acquiring light detection and ranging (lidar) projects of varying sizes scattered across the United States. As a result, the national 3DEP elevation layer is subject to data gaps or unnecessary overlap between adjacent collections. To mitigate this problem, 3DEP is adopting a strategic, systematic approach to national data acquisition that will create efficiencies in efforts to achieve nationwide elevation data coverage and help capture additional Federal and non-Federal investments resulting from advance awareness of proposed acquisitions and partnership opportunities. The 3DEP Working Group, an interagency group managed by the USGS, has agreed that all future 3DEP collections within the lower 48 States should be coordinated by using a 1-kilometer by 1-kilometer tiling scheme for the conterminous United States. Fiscal Year 2018 is being considered a transition year, and in Fiscal Year 2019 the national indexing scheme will be fully implemented, so that all 3DEP-supported projects will be acquired and delivered in the national indexing scheme and projected into the Albers Equal Area projection. 

An Architecture for the Integration of Clinical Data from a PEHR in a Regional Research Platform.

PubMed

Schreiweis, Björn; Bronsch, Tobias; Stein, Katharina E; Nöst, Stefan; Aguduri, Lakshmi S; Brandner, Antje; Pensold, Peter; Weiss, Nicolas; Yüksekogul, Nilay; Bergh, Björn; Heinze, Oliver

2016-01-01

Making clinical information available for research is not only relevant for healthcare institutions, but also for regional EHRs, as cross-sectorial information can be made accessible. In the INFOPAT (INFOrmation technology for PATient-oriented health care in the Rhine-Neckar metropolitan region) project we are thus implementing both, a regional personal cross-enterprise electronic health record (PEHR) and a regional research platform (RRP) based on information from the PEHR. IHE profiles are implemented to achieve interoperability between healthcare institutions electronic medical records (EMR) and PEHR on the one hand, as well as PEHR and RRP on the other hand. The use case for the RRP is cross-sectorial quality assessment and improvement for colorectal cancer based on a quality indicator (QI) approach including patients' perspectives. For semantic interoperability the responses are transferred in the form of HL7 CDA L2 documents. The resulting architecture for a RRP shows that implementing a PEHR in combination with a RRP based on international communication standards is possible. Also IHE XDS can be used for integration of patient care and biomedical research infrastructures.

C++, objected-oriented programming, and astronomical data models

NASA Technical Reports Server (NTRS)

Farris, A.

1992-01-01

Contemporary astronomy is characterized by increasingly complex instruments and observational techniques, higher data collection rates, and large data archives, placing severe stress on software analysis systems. The object-oriented paradigm represents a significant new approach to software design and implementation that holds great promise for dealing with this increased complexity. The basic concepts of this approach will be characterized in contrast to more traditional procedure-oriented approaches. The fundamental features of objected-oriented programming will be discussed from a C++ programming language perspective, using examples familiar to astronomers. This discussion will focus on objects, classes and their relevance to the data type system; the principle of information hiding; and the use of inheritance to implement generalization/specialization relationships. Drawing on the object-oriented approach, features of a new database model to support astronomical data analysis will be presented.

Integration of educational and scientific-technological areas during the process of education of aerospace engineers

NASA Astrophysics Data System (ADS)

Mayorova, Vera

2011-09-01

National priorities, defined by modern state of high-tech industries, demand adequate problem solving of training professionals possessing required modern qualifications. Modern tendencies of the development of aerospace technologies, harsh competition in the market of space services and expansion of international cooperation for implementation of space projects, demand sharp increase of the scientific/technical level and competitiveness of the developed projects. Especially important is to be able to solve technological problems, which in turn define the cost and quality attributes of the designed item, as well as the ability to utilize the most modern design principles. Training of highly efficient, creative professionals who are capable of generating and implementing new ideas is a very important factor driving not only the development of national economy and industry, but also enriching the human capital of the country. Moscow State Technical University named after N.E. Bauman developed and successfully implemented the project-oriented technology of professional training for aerospace industry. It assumes a multitude of forms, methodologies and organizational events, which allow preparing the specialists - on the basis of integration of scientific/technological and educational environment - who are adapted to the conditions of the intellectual market. The Youth Space Center of the University is the base where graduate and post-graduate students attend unique lectures as a part of the facultative course "Applied Cosmonautics", participate in annual International Youth Science School "Space Development: Theory and Practice" and develop innovative technical projects aimed at creation of real-life space hardware. Microsatellite technologies are being developed in Bauman University through various projects, which are implemented in a coordinated manner by way of accomplishing the following steps: development of small-size satellites by universities, using them as test-beds for quick and affordable trial-and-test of new technologies and design solutions in aerospace followed by implementation of selected efficiencies in the industry; development and improvement of ground control infrastructure based in the university, which includes the Mission Control Center and the Earth Remote Sensing Center; development of cooperative partnerships with international partners in the field of microsatellite technologies with the goal of sharing experience, uniting efforts in preparing and running scientific and educational experiments and creating next-generation spacecraft by multi-national student groups. Such approaches allow creating seamless environment that unites educational, scientific and innovative processes. This allows students to develop high professionalism, modern engineering thinking and stable engineering skills at an early stage of education at the university.

A microprocessor card software server to support the Quebec health microprocessor card project.

PubMed

Durant, P; Bérubé, J; Lavoie, G; Gamache, A; Ardouin, P; Papillon, M J; Fortin, J P

1995-01-01

The Quebec Health Smart Card Project is advocating the use of a memory card software server[1] (SCAM) to implement a portable medical record (PMR) on a smart card. The PMR is viewed as an object that can be manipulated by SCAM's services. In fact, we can talk about a pseudo-object-oriented approach. This software architecture provides a flexible and evolutive way to manage and optimize the PMR. SCAM is a generic software server; it can manage smart cards as well as optical (laser) cards or other types of memory cards. But, in the specific case of the Quebec Health Card Project, SCAM is used to provide services between physicians' or pharmacists' software and IBM smart card technology. We propose to expose the concepts and techniques used to provide a generic environment to deal with smart cards (and more generally with memory cards), to obtain a dynamic an evolutive PMR, to raise the system global security level and the data integrity, to optimize significantly the management of the PMR, and to provide statistic information about the use of the PMR.

Guided Inquiry Learning With Sea Water Battery Project

NASA Astrophysics Data System (ADS)

Mashudi, A.

2017-02-01

Science learning process is expected to produce valuable product, innovative and real learning environment, and provide memorable learning experience. That orientation can be contained in Inquiry Based Learning. SMP N 4 Juwana is located close to the beach. That’s why, Sea Water Battery Project is very suitable to be applied in learning activity as an effort to fulfill the renewable energy based on local wisdom. This study aims to increase interest, activity and achievement of students. Learning implementation stage, namely : Constructing Sea Water Battery project, observation, group presentations, and feedback. Sea Water Battery is renewable energy battery from materials easily found around the learner. The materials used are copper plate as the anode, zinc plate as the cathode and sea water as the electrolyte. Average score of students Interest on the first cycle 76, while on the second cycle 85. Average score of students Activity on the first cycle 76 and on the second cycle 86. Average score of students achievement on the first cycle 75, while on the second cycle 84. This learning process gave nurturant effect for students to keep innovating and construct engineering technology for the future.

Structure-oriented versus process-oriented approach to enhance efficiency for emergency room operations: what lessons can we learn?

PubMed

Hwang, Taik Gun; Lee, Younsuk; Shin, Hojung

2011-01-01

The efficiency and quality of a healthcare system can be defined as interactions among the system structure, processes, and outcome. This article examines the effect of structural adjustment (change in floor plan or layout) and process improvement (critical pathway implementation) on performance of emergency room (ER) operations for acute cerebral infarction patients. Two large teaching hospitals participated in this study: Korea University (KU) Guro Hospital and KU Anam Hospital. The administration of Guro adopted a structure-oriented approach in improving its ER operations while the administration of Anam employed a process-oriented approach, facilitating critical pathways and protocols. To calibrate improvements, the data for time interval, length of stay, and hospital charges were collected, before and after the planned changes were implemented at each hospital. In particular, time interval is the most essential measure for handling acute stroke patients because patients' survival and recovery are affected by the promptness of diagnosis and treatment. Statistical analyses indicated that both redesign of layout at Guro and implementation of critical pathways at Anam had a positive influence on most of the performance measures. However, reduction in time interval was not consistent at Guro, demonstrating delays in processing time for a few processes. The adoption of critical pathways at Anam appeared more effective in reducing time intervals than the structural rearrangement at Guro, mainly as a result of the extensive employee training required for a critical pathway implementation. Thus, hospital managers should combine structure-oriented and process-oriented strategies to maximize effectiveness of improvement efforts.

NeuroManager: a workflow analysis based simulation management engine for computational neuroscience

PubMed Central

Stockton, David B.; Santamaria, Fidel

2015-01-01

We developed NeuroManager, an object-oriented simulation management software engine for computational neuroscience. NeuroManager automates the workflow of simulation job submissions when using heterogeneous computational resources, simulators, and simulation tasks. The object-oriented approach (1) provides flexibility to adapt to a variety of neuroscience simulators, (2) simplifies the use of heterogeneous computational resources, from desktops to super computer clusters, and (3) improves tracking of simulator/simulation evolution. We implemented NeuroManager in MATLAB, a widely used engineering and scientific language, for its signal and image processing tools, prevalence in electrophysiology analysis, and increasing use in college Biology education. To design and develop NeuroManager we analyzed the workflow of simulation submission for a variety of simulators, operating systems, and computational resources, including the handling of input parameters, data, models, results, and analyses. This resulted in 22 stages of simulation submission workflow. The software incorporates progress notification, automatic organization, labeling, and time-stamping of data and results, and integrated access to MATLAB's analysis and visualization tools. NeuroManager provides users with the tools to automate daily tasks, and assists principal investigators in tracking and recreating the evolution of research projects performed by multiple people. Overall, NeuroManager provides the infrastructure needed to improve workflow, manage multiple simultaneous simulations, and maintain provenance of the potentially large amounts of data produced during the course of a research project. PMID:26528175

NeuroManager: a workflow analysis based simulation management engine for computational neuroscience.

PubMed

Stockton, David B; Santamaria, Fidel

2015-01-01

We developed NeuroManager, an object-oriented simulation management software engine for computational neuroscience. NeuroManager automates the workflow of simulation job submissions when using heterogeneous computational resources, simulators, and simulation tasks. The object-oriented approach (1) provides flexibility to adapt to a variety of neuroscience simulators, (2) simplifies the use of heterogeneous computational resources, from desktops to super computer clusters, and (3) improves tracking of simulator/simulation evolution. We implemented NeuroManager in MATLAB, a widely used engineering and scientific language, for its signal and image processing tools, prevalence in electrophysiology analysis, and increasing use in college Biology education. To design and develop NeuroManager we analyzed the workflow of simulation submission for a variety of simulators, operating systems, and computational resources, including the handling of input parameters, data, models, results, and analyses. This resulted in 22 stages of simulation submission workflow. The software incorporates progress notification, automatic organization, labeling, and time-stamping of data and results, and integrated access to MATLAB's analysis and visualization tools. NeuroManager provides users with the tools to automate daily tasks, and assists principal investigators in tracking and recreating the evolution of research projects performed by multiple people. Overall, NeuroManager provides the infrastructure needed to improve workflow, manage multiple simultaneous simulations, and maintain provenance of the potentially large amounts of data produced during the course of a research project.

Lean practices for quality results: a case illustration.

PubMed

Hwang, Pauline; Hwang, David; Hong, Paul

2014-01-01

Increasingly, healthcare providers are implementing lean practices to achieve quality results. Implementing lean healthcare practices is unique compared to manufacturing and other service industries. The purpose of this paper is to present a model that identifies and defines the lean implementation key success factors in healthcare organisations. The model is based on an extant literature review and a case illustration that explores actual lean implementation in a major USA hospital located in a Midwestern city (approximately 300,000 people). An exploratory/descriptive study using observation and follow-up interviews was conducted to identify lean practices in the hospital. Lean practice key drivers include growing elderly populations, rising medical expenses, decreasing insurance coverage and decreasing management support. Effectively implementing lean practices to increase bottom-line results and improve organisational integrity requires sharing goals and processes among healthcare managers and professionals. An illustration explains the model and the study provides a sound foundation for empirical work. Practical implications are included. Lean practices minimise waste and unnecessary hospital stays while simultaneously enhancing customer values and deploying resources in supply systems. Leadership requires clear project targets based on sound front-end planning because initial implementation steps involve uncertainty and ambiguity (i.e. fuzzy front-end planning). Since top management support is crucial for implementing lean practices successfully, a heavyweight manager, who communicates well both with top managers and project team members, is an important success factor when implementing lean practices. Increasingly, green orientation and sustainability initiatives are phrases that replaced lean practices. Effective results; e.g. waste reduction, employee satisfaction and customer values are applicable to bigger competitive challenges arising both in specific organisations and inter-organisational networks. Healthcare managers are adopting business practices that improve efficiency and productivity while ensuring their healthcare mission and guaranteeing that customer values are achieved. Shared understanding about complex goals (e.g. reducing waste and enhancing customer value) at the front-end is crucial for implementing successful lean practices. In particular, this study shows that nursing practices, which are both labour intensive and technology enabled, are good candidates for lean practice.

The Cognitively Oriented Curriculum: A Framework for Preschool Teachers. Final Report. Volume I of 2 Volumes.

ERIC Educational Resources Information Center

Weikart, David P.; And Others

This report describes the Cognitively Oriented Curriculum based on Piagetian theory which is used in the Perry Preschool Project. The purpose of this long-term project is to help educationally disadvantaged Negro children develop the concepts and abilities necessary for academic success. The Piagetian theory of cognitive development is discussed…

The Effect of a Graph-Oriented Computer-Assisted Project-Based Learning Environment on Argumentation Skills

ERIC Educational Resources Information Center

Hsu, P. -S.; Van Dyke, M.; Chen, Y.; Smith, T. J.

2015-01-01

The purpose of this quasi-experimental study was to explore how seventh graders in a suburban school in the United States developed argumentation skills and science knowledge in a project-based learning environment that incorporated a graph-oriented, computer-assisted application. A total of 54 students (three classes) comprised this treatment…

Bilingual Academic Computer and Technology Oriented Program. Project COM-TECH, 1987-1988.

ERIC Educational Resources Information Center

Berney, Tomi D.; Plotkin, Donna

The Bilingual Computer and Technology Oriented Program (COM-TECH) completed the final year of a 3-year funding cycle. The project's primary goal was to provide bilingual individualized instruction, using an enrichment approach, to Spanish- and Haitian Creole/French-speaking students of varying levels of native and English second-language (ESL)…

Teaching Protein Purification and Characterization Techniques: A Student-Initiated, Project-Oriented Biochemistry Laboratory Course

ERIC Educational Resources Information Center

MacDonald, Gina

2008-01-01

This report describes a biochemistry laboratory that is completely project-oriented. Upper-level biology and chemistry majors work in teams to purify a protein of their choice. After the student groups have completed literature searches, ordered reagents, and made buffers they continue to learn basic protein purification and biochemical techniques…

The standard data model approach to patient record transfer.

PubMed Central

Canfield, K.; Silva, M.; Petrucci, K.

1994-01-01

This paper develops an approach to electronic data exchange of patient records from Ambulatory Encounter Systems (AESs). This approach assumes that the AES is based upon a standard data model. The data modeling standard used here is IDEFIX for Entity/Relationship (E/R) modeling. Each site that uses a relational database implementation of this standard data model (or a subset of it) can exchange very detailed patient data with other such sites using industry standard tools and without excessive programming efforts. This design is detailed below for a demonstration project between the research-oriented geriatric clinic at the Baltimore Veterans Affairs Medical Center (BVAMC) and the Laboratory for Healthcare Informatics (LHI) at the University of Maryland. PMID:7949973

DOE Office of Scientific and Technical Information (OSTI.GOV)

Prasad, M.K.; Kershaw, D.S.; Shaw, M.J.

The authors present detailed features of the ICF3D hydrodynamics code used for inertial fusion simulations. This code is intended to be a state-of-the-art upgrade of the well-known fluid code, LASNEX. ICF3D employs discontinuous finite elements on a discrete unstructured mesh consisting of a variety of 3D polyhedra including tetrahedra, prisms, and hexahedra. The authors discussed details of how the ROE-averaged second-order convection was applied on the discrete elements, and how the C++ coding interface has helped to simplify implementing the many physics and numerics modules within the code package. The author emphasized the virtues of object-oriented design in large scalemore » projects such as ICF3D.« less

General ultrafast pulse measurement using the cross-correlation single-shot sonogram technique.

PubMed

Reid, Derryck T; Garduno-Mejia, Jesus

2004-03-15

The cross-correlation single-shot sonogram technique offers exact pulse measurement and real-time pulse monitoring via an intuitive time-frequency trace whose shape and orientation directly indicate the spectral chirp of an ultrashort laser pulse. We demonstrate an algorithm that solves a fundamental limitation of the cross-correlation sonogram method, namely, that the time-gating operation is implemented using a replica of the measured pulse rather than the ideal delta-function-like pulse. Using a modified principal-components generalized projections algorithm, we experimentally show accurate pulse retrieval of an asymmetric double pulse, a case that is prone to systematic error when one is using the original sonogram retrieval algorithm.

GSMS and space views: Advanced spacecraft monitoring tools

NASA Technical Reports Server (NTRS)

Carlton, Douglas; Vaules, David, Jr.; Mandl, Daniel

1993-01-01

The Graphical Spacecraft Monitoring System (GSMS) processes and translates real-time telemetry data from the Gamma Ray Observatory (GRO) spacecraft into high resolution 2-D and 3-D color displays showing the spacecraft's position relative to the Sun, Earth, Moon, and stars, its predicted orbit path, its attitude, instrument field of views, and other items of interest to the GRO Flight Operations Team (FOT). The GSMS development project is described and the approach being undertaken for implementing Space Views, the next version of GSMS, is presented. Space Views is an object-oriented graphical spacecraft monitoring system that will become a standard component of Goddard Space Flight Center's Transportable Payload Operations Control Center (TPOCC).

The Method of Multiple Spatial Planning Basic Map

NASA Astrophysics Data System (ADS)

Zhang, C.; Fang, C.

2018-04-01

The "Provincial Space Plan Pilot Program" issued in December 2016 pointed out that the existing space management and control information management platforms of various departments were integrated, and a spatial planning information management platform was established to integrate basic data, target indicators, space coordinates, and technical specifications. The planning and preparation will provide supportive decision support, digital monitoring and evaluation of the implementation of the plan, implementation of various types of investment projects and space management and control departments involved in military construction projects in parallel to approve and approve, and improve the efficiency of administrative approval. The space planning system should be set up to delimit the control limits for the development of production, life and ecological space, and the control of use is implemented. On the one hand, it is necessary to clarify the functional orientation between various kinds of planning space. On the other hand, it is necessary to achieve "multi-compliance" of various space planning. Multiple spatial planning intergration need unified and standard basic map(geographic database and technical specificaton) to division of urban, agricultural, ecological three types of space and provide technical support for the refinement of the space control zoning for the relevant planning. The article analysis the main space datum, the land use classification standards, base map planning, planning basic platform main technical problems. Based on the geographic conditions, the results of the census preparation of spatial planning map, and Heilongjiang, Hainan many rules combined with a pilot application.

Developing a mapping tool for tablets

NASA Astrophysics Data System (ADS)

Vaughan, Alan; Collins, Nathan; Krus, Mike

2014-05-01

Digital field mapping offers significant benefits when compared with traditional paper mapping techniques in that it provides closer integration with downstream geological modelling and analysis. It also provides the mapper with the ability to rapidly integrate new data with existing databases without the potential degradation caused by repeated manual transcription of numeric, graphical and meta-data. In order to achieve these benefits, a number of PC-based digital mapping tools are available which have been developed for specific communities, eg the BGS•SIGMA project, Midland Valley's FieldMove®, and a range of solutions based on ArcGIS® software, which can be combined with either traditional or digital orientation and data collection tools. However, with the now widespread availability of inexpensive tablets and smart phones, a user led demand for a fully integrated tablet mapping tool has arisen. This poster describes the development of a tablet-based mapping environment specifically designed for geologists. The challenge was to deliver a system that would feel sufficiently close to the flexibility of paper-based geological mapping while being implemented on a consumer communication and entertainment device. The first release of a tablet-based geological mapping system from this project is illustrated and will be shown as implemented on an iPad during the poster session. Midland Valley is pioneering tablet-based mapping and, along with its industrial and academic partners, will be using the application in field based projects throughout this year and will be integrating feedback in further developments of this technology.

Virtual Stream Stage Sensor Using Projected Geometry and Augmented Reality for Crowdsourcing Citizen Science Applications

NASA Astrophysics Data System (ADS)

Demir, I.; Villanueva, P.; Sermet, M. Y.

2016-12-01

Accurately measuring the surface level of a river is a vital component of environmental monitoring and modeling efforts. Reliable data points are required for calibrating the statistical models that are used for, among other things, flood prediction and model validation. While current embedded monitoring systems provide accurate measurements, the cost to replicate this current system on a large scale is prohibitively expensive, limiting the quantity of data available. In this project, we describe a new method to accurately measure river levels using smartphone sensors. We take three pictures of the same point on the river's surface and perform calculations based on the GPS location and spatial orientation of the smartphone for each picture using projected geometry. Augmented reality is used to improve the accuracy of smartphone sensor readings. This proposed implementation is significantly cheaper than existing water measuring systems while offering similar accuracy. Additionally, since the measurements are taken by sensors that are commonly found in smartphones, crowdsourcing the collection of river measurements to citizen-scientists is possible. Thus, our proposed method leads to a much higher quantity of reliable data points than currently possible at a fraction of the cost. Sample runs and an analysis of the results are included. The presentation concludes with a discussion of future work, including applications to other fields and plans to implement a fully automated system using this method in tandem with image recognition and machine learning.

Integrating improvement learning into a family medicine residency curriculum.

PubMed

Pensa, Mellisa; Frew, Patty; Gelmon, Sherril B

2013-06-01

Knowledge of improvement practices is a critical skill for family medicine residents who will lead patient-centered medical homes. The Accreditation Council for Graduate Medical Education includes systems-based practice and improvement knowledge as a core competency for residency education. The objective of this report is to describe the 6-year implementation and development of our practice-based improvement curriculum in a family medicine residency. In 2006, Oregon Health and Science University Family Medicine Residency implemented an improvement curriculum that focused on clinic-based improvement and involved longitudinal didactics. Over the course of 6 years, the curriculum has been refined to include longitudinal instruction of improvement principles according to the levels of training and clinic-based didactics and experientials that are team oriented. Residents complete ambulatory improvement projects over the cycle of 12 months and present outcomes each year. Residents evaluated their knowledge, experience, confidence, and satisfaction at the end of the academic year. Ninety percent of residents designed and lead improvement projects upon graduation from residency in 2011. Resident confidence to make a change in local health care settings at the end of the curriculum was high and improved from 2009/2010 to 2010/2011. Upon graduation from the program, 100% of residents reported competence or proficiency in their ability to apply knowledge to an improvement project and present results. We describe a longitudinal, practical, developmental, and clinically based experiential improvement curriculum that has been successfully integrated into a family medicine residency program.

Epipolar Consistency in Transmission Imaging.

PubMed

Aichert, André; Berger, Martin; Wang, Jian; Maass, Nicole; Doerfler, Arnd; Hornegger, Joachim; Maier, Andreas K

2015-11-01

This paper presents the derivation of the Epipolar Consistency Conditions (ECC) between two X-ray images from the Beer-Lambert law of X-ray attenuation and the Epipolar Geometry of two pinhole cameras, using Grangeat's theorem. We motivate the use of Oriented Projective Geometry to express redundant line integrals in projection images and define a consistency metric, which can be used, for instance, to estimate patient motion directly from a set of X-ray images. We describe in detail the mathematical tools to implement an algorithm to compute the Epipolar Consistency Metric and investigate its properties with detailed random studies on both artificial and real FD-CT data. A set of six reference projections of the CT scan of a fish were used to evaluate accuracy and precision of compensating for random disturbances of the ground truth projection matrix using an optimization of the consistency metric. In addition, we use three X-ray images of a pumpkin to prove applicability to real data. We conclude, that the metric might have potential in applications related to the estimation of projection geometry. By expression of redundancy between two arbitrary projection views, we in fact support any device or acquisition trajectory which uses a cone-beam geometry. We discuss certain geometric situations, where the ECC provide the ability to correct 3D motion, without the need for 3D reconstruction.

Reconstruction of brachytherapy seed positions and orientations from cone-beam CT x-ray projections via a novel iterative forward projection matching method.

PubMed

Pokhrel, Damodar; Murphy, Martin J; Todor, Dorin A; Weiss, Elisabeth; Williamson, Jeffrey F

2011-01-01

To generalize and experimentally validate a novel algorithm for reconstructing the 3D pose (position and orientation) of implanted brachytherapy seeds from a set of a few measured 2D cone-beam CT (CBCT) x-ray projections. The iterative forward projection matching (IFPM) algorithm was generalized to reconstruct the 3D pose, as well as the centroid, of brachytherapy seeds from three to ten measured 2D projections. The gIFPM algorithm finds the set of seed poses that minimizes the sum-of-squared-difference of the pixel-by-pixel intensities between computed and measured autosegmented radiographic projections of the implant. Numerical simulations of clinically realistic brachytherapy seed configurations were performed to demonstrate the proof of principle. An in-house machined brachytherapy phantom, which supports precise specification of seed position and orientation at known values for simulated implant geometries, was used to experimentally validate this algorithm. The phantom was scanned on an ACUITY CBCT digital simulator over a full 660 sinogram projections. Three to ten x-ray images were selected from the full set of CBCT sinogram projections and postprocessed to create binary seed-only images. In the numerical simulations, seed reconstruction position and orientation errors were approximately 0.6 mm and 5 degrees, respectively. The physical phantom measurements demonstrated an absolute positional accuracy of (0.78 +/- 0.57) mm or less. The theta and phi angle errors were found to be (5.7 +/- 4.9) degrees and (6.0 +/- 4.1) degrees, respectively, or less when using three projections; with six projections, results were slightly better. The mean registration error was better than 1 mm/6 degrees compared to the measured seed projections. Each test trial converged in 10-20 iterations with computation time of 12-18 min/iteration on a 1 GHz processor. This work describes a novel, accurate, and completely automatic method for reconstructing seed orientations, as well as centroids, from a small number of radiographic projections, in support of intraoperative planning and adaptive replanning. Unlike standard back-projection methods, gIFPM avoids the need to match corresponding seed images on the projections. This algorithm also successfully reconstructs overlapping clustered and highly migrated seeds in the implant. The accuracy of better than 1 mm and 6 degrees demonstrates that gIFPM has the potential to support 2D Task Group 43 calculations in clinical practice.

Reconstruction of brachytherapy seed positions and orientations from cone-beam CT x-ray projections via a novel iterative forward projection matching method

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pokhrel, Damodar; Murphy, Martin J.; Todor, Dorin A.

2011-01-15

Purpose: To generalize and experimentally validate a novel algorithm for reconstructing the 3D pose (position and orientation) of implanted brachytherapy seeds from a set of a few measured 2D cone-beam CT (CBCT) x-ray projections. Methods: The iterative forward projection matching (IFPM) algorithm was generalized to reconstruct the 3D pose, as well as the centroid, of brachytherapy seeds from three to ten measured 2D projections. The gIFPM algorithm finds the set of seed poses that minimizes the sum-of-squared-difference of the pixel-by-pixel intensities between computed and measured autosegmented radiographic projections of the implant. Numerical simulations of clinically realistic brachytherapy seed configurations weremore » performed to demonstrate the proof of principle. An in-house machined brachytherapy phantom, which supports precise specification of seed position and orientation at known values for simulated implant geometries, was used to experimentally validate this algorithm. The phantom was scanned on an ACUITY CBCT digital simulator over a full 660 sinogram projections. Three to ten x-ray images were selected from the full set of CBCT sinogram projections and postprocessed to create binary seed-only images. Results: In the numerical simulations, seed reconstruction position and orientation errors were approximately 0.6 mm and 5 deg., respectively. The physical phantom measurements demonstrated an absolute positional accuracy of (0.78{+-}0.57) mm or less. The {theta} and {phi} angle errors were found to be (5.7{+-}4.9) deg. and (6.0{+-}4.1) deg., respectively, or less when using three projections; with six projections, results were slightly better. The mean registration error was better than 1 mm/6 deg. compared to the measured seed projections. Each test trial converged in 10-20 iterations with computation time of 12-18 min/iteration on a 1 GHz processor. Conclusions: This work describes a novel, accurate, and completely automatic method for reconstructing seed orientations, as well as centroids, from a small number of radiographic projections, in support of intraoperative planning and adaptive replanning. Unlike standard back-projection methods, gIFPM avoids the need to match corresponding seed images on the projections. This algorithm also successfully reconstructs overlapping clustered and highly migrated seeds in the implant. The accuracy of better than 1 mm and 6 deg. demonstrates that gIFPM has the potential to support 2D Task Group 43 calculations in clinical practice.« less

Interactive Computerized Video Orientation.

ERIC Educational Resources Information Center

Briesacker, Jeanie

In response to California State Assembly Bill (AB) 3, which requires the state's community colleges to implement orientations and other specified matriculation services, Fullerton College (FC) developed two orientation videos in 1989 for native speakers of English and English-as-a-Second Language (ESL) students. The videos were used by counselors…

Study and Demonstration of Planning and Scheduling Concepts for the Earth Observing System Data and Information System

NASA Technical Reports Server (NTRS)

Davis, Randal; Thalman, Nancy

1993-01-01

The University of Colorado's Laboratory for Atmospheric and Space Physics (CU/LASP) along with the Goddard Space Flight Center (GSFC) and the Jet Propulsion Laboratory (JPL) designed, implemented, tested, and demonstrated a prototype of the distributed, hierarchical planning and scheduling system comtemplated for the Earth Observing System (EOS) project. The planning and scheduling prototype made use of existing systems: CU/LASP's Operations and Science Instrument Support Planning and Scheduling (OASIS-PS) software package; GSFC's Request Oriented Scheduling Engine (ROSE); and JPL's Plan Integrated Timeliner 2 (Plan-It-2). Using these tools, four scheduling nodes were implemented and tied together using a new communications protocol for scheduling applications called the Scheduling Applications Interface Language (SAIL). An extensive and realistic scenario of EOS satellite operations was then developed and the prototype scheduling system was tested and demonstrated using the scenario. Two demonstrations of the system were given to NASA personnel and EOS core system (ECS) contractor personnel. A comprehensive volume of lessons learned was generated and a meeting was held with NASA and ECS representatives to review these lessons learned. A paper and presentation on the project's final results was given at the American Institute of Aeronautics and Astronautics Computing in Aerospace 9 conference.

Implementing a Case-Based E-Learning Environment in a Lecture-Oriented Anaesthesiology Class: Do Learning Styles Matter in Complex Problem Solving over Time?

ERIC Educational Resources Information Center

Choi, Ikseon; Lee, Sang Joon; Kang, Jeongwan

2009-01-01

This study explores how students' learning styles influence their learning while solving complex problems when a case-based e-learning environment is implemented in a conventional lecture-oriented classroom. Seventy students from an anaesthesiology class at a dental school participated in this study over a 3-week period. Five learning-outcome…

The utility of Geographical Information Systems (GIS) in systems-oriented obesity intervention projects: The selection of comparable study sites for a quasi-experimental intervention design--TX CORD

USDA-ARS?s Scientific Manuscript database

The Texas Childhood Obesity Research Demonstration project (TX CORD) uses a systems-oriented approach to address obesity that includes individual and family interventions, community-level action, as well as environmental and policy initiatives. Given that randomization is seldom possible in communit...

Strategies for Interculturally-oriented Civics Teaching at Primary and Secondary Level. Final Symposium (Timisoara, Romania, December 7-11, 1994). Report.

ERIC Educational Resources Information Center

Birzea, Cesar

This publication reports on the final symposium of the "Strategies for Interculturally-oriented Civics Teaching at Primary and Secondary Level" pilot project. The report presents an overview of the various aspects of the project and outlines the results of the experimental phase in which 40 teachers representing 16 European countries…

The Use of Concept Maps in Creating a Short Video with Students

ERIC Educational Resources Information Center

Gocsál, Ákos; Tóth, Renáta

2016-01-01

This paper presents the results of an experimental project in which media students created a short video. The students in groups of 4 or 5 used concept maps for collected their ideas about organizing the project. The analysis of the concept maps revealed that two groups were product-oriented, one group was workflow-oriented, and two groups used…

[RehaFuturReal®: Evaluation of Implementation in Organizational Structure and in Counseling Process - An Overview of Results].

PubMed

Arling, V; Knispel, J; Spijkers, W

2016-08-01

Due to prevailing future challenges in vocational rehabilitation, development process RehaFutur (BMAS) was initiated. In this context, recommendations were made to secure a future-oriented, innovative vocational rehabilitation in Germany. Deutsche Rentenversicherung (DRV) Westfalen transferred these recommendations into a new and applicable counseling concept RehaFutuReal(®). Rehabilitation managers (RM) are central protagonists in counseling process. Therefore, RehaFuturReal(®) focused on optimization of counseling performance. To achieve this aim, rehabilitation managers were taught to work with a case management (CM) based approach. RWTH Aachen supported RehaFuturReal(®) from an academic point of view and conducted a formative and summative evaluation. Primary aim of RWTH Aachen was to support DRV Westfalen during implementation of RehaFuturReal(®) into their organizational structure. Additionally, RWTH Aachen controlled whether transfer of RehaFutuReal(®) in counseling process was successful. From 04-01-13 until 12-31-14, RehaFuturReal(®) was tested by DRV Westfalen in the intervention district Dortmund with 10 RM. There were 3 selection criteria for the overall sample of N=320 insurants: participants were required to have an active employment status, suffered from integration issues and were in need of support to achieve vocational integration. Evaluation of RehaFuturReal(®) was realized summative (pre-post-comparison) and formative (process-orientated). Evaluative judgment regarding implementation in organizational structure and counseling process was performed by using three-stage-concept of Donabedian (quality of structure, process and results). Thereby, feedback of RM, insurants and employers was taken into account. Analysis of evaluation results revealed a positive overall impression. Implementation into organizational structure was successful on all 3 quality stages: concept of project and CM-training were an adequate basis and appropriately put into practice by fulfilling prescribed objectives, topics and schedule (quality of structure). Rehabilitation managers identified themselves with the implementation process into DRV Westfalen (grading of CM training: M=1,67; SD=0,65; quality of process). Analogous, consultants reported a high level of satisfaction during implementation of new counseling process (possible span: 1-4; M=3,11; SD=0,33; quality of results). Regarding implementation of counseling process, sample fitted into 3 selection criteria wherefore the correct insurants were picked in RehaFuturReal(®) (quality of structure). CM-orientated counseling approach was properly implemented into everyday work of RM by using CM-instruments for documentation (quality of process). RM were highly satisfied (possible span: 1-4) with counseling performance (M=3,43; SD=0,77). Employers also rated counseling performance positively (M=3,38; SD=0,85). By contrast, surveying insurants revealed a heterogeneous impression of satisfaction (M=2,97; SD=1,03) (quality of results). © Georg Thieme Verlag KG Stuttgart · New York.

Topographic instructions, Book 3, multiplex procedure; Chapter 3 C7a-e

USGS Publications Warehouse

Loud, Edward I.

1952-01-01

By direct projection of overlapping photographs, printed on glass plates, the multiplex produces an exact optical model, in miniature, of the terrain to be mapped. To create the model, the multiplex projectors must be properly positioned and oriented so that they duplicate the orientation of the aerial camera at the instant of each exposure. By means of a floating mark, horizontal and vertical measurements can be made in the model, and planimetry and contours can be drawn. The applicability of the multiplex to a given mapping project depends largely on the contour interval and compilation scale required, and also depends, to a lesser extent, on the vegetation and terrain cover as it may affect accuracy requirements. The steps in multiplex procedure are orientation, stereotriangulation, and compilation of detail. In orientation, the projectors are arranged so that the projected images form a stereoscopic model which can be adjusted to fit horizontal and vertical control points. In stereotriangulation, three or more multiplex projectors are oriented so that the consecutive models fit existing control, permitting the establishment of additional or intermediate control. In compilation, the features appearing in the model are delineated on the map manuscript.

Valuing Orientation Efficacy: Rethinking Undergraduate Business Student's First Impressions

ERIC Educational Resources Information Center

McPhail, Ruth; French, Ben; Wilson, Keithia

2015-01-01

Purpose: The purpose of this study was to improve the orientation experience of commencing first-year undergraduate business students to better prepare them for the reality of their academic studies through the development and implementation of a Commencing Student-Needs-Centred Orientation Framework. Design/methodology/approach: The methodology…

U.S.--American Value Orientations. Cultural Monograph No. 4. Bilingual Multicultural Education Training Project for School Psychologists and Guidance Counselors.

ERIC Educational Resources Information Center

Hallman, Clemens L.; And Others

This teacher training monograph deals with value orientations of cultures in general and with specific reference to United States Culture. The first two sections discuss the conceptual issues of value orientation and give axiological definitions of the six clusters used to describe cultural orientation: self, the family, society, human nature,…

Considerations of persistence and security in CHOICES, an object-oriented operating system

NASA Technical Reports Server (NTRS)

Campbell, Roy H.; Madany, Peter W.

1990-01-01

The current design of the CHOICES persistent object implementation is summarized, and research in progress is outlined. CHOICES is implemented as an object-oriented system, and persistent objects appear to simplify and unify many functions of the system. It is demonstrated that persistent data can be accessed through an object-oriented file system model as efficiently as by an existing optimized commercial file system. The object-oriented file system can be specialized to provide an object store for persistent objects. The problems that arise in building an efficient persistent object scheme in a 32-bit virtual address space that only uses paging are described. Despite its limitations, the solution presented allows quite large numbers of objects to be active simultaneously, and permits sharing and efficient method calls.

Characteristics of value-based health and social care from organisations' perspectives (OrgValue): a mixed-methods study protocol.

PubMed

Ansmann, Lena; Hillen, Hendrik Ansgar; Kuntz, Ludwig; Stock, Stephanie; Vennedey, Vera; Hower, Kira Isabelle

2018-04-27

Health and social care systems are under pressure to organise care around patients' needs with constrained resources. Several studies reveal that care is constantly challenged by balancing economic requirements against individual patients' preferences and needs. Therefore, value-based health and social care aims to facilitate patient-centredness while taking the resources spent into consideration. The OrgValue project examines the implementation of patient-centredness while considering the health and social care organisations' resource orientation in the model region of the city of Cologne, Germany. First, the implementation status of patient-centredness as well as its facilitators and barriers-also in terms of resource orientation-will be assessed through face-to-face interviews with decision-makers (at least n=18) from health and social care organisations (HSCOs) in Cologne. Second, patients' understanding of patient-centredness and their preferences and needs will be revealed by conducting face-to-face interviews (at least n=15). Third, the qualitative results will provide the basis for a quantitative survey of decision-makers from all HSCOs in Cologne, which will include questions on patient-centredness, resource orientation and determinants of implementation. Fourth, qualitative interviews with decision-makers from different types of HSCOs will be conducted to develop a uniform measurement instrument on the cost and service structure of HSCOs. For all collected data, the relevant data protection regulations will be adhered to. Consultation and a positive vote from the ethics committee of the Medical Faculty of the University of Cologne have been obtained. All personal identifiers (eg, name, date of birth) will be pseudonymised. Dissemination strategies include a feedback report as well as research and development workshops for the organisations with the aim of initiating organisational learning and organisational development, presenting results in publications and at conferences, and public relations. DRKS00011925. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Examination of the relationship between project management critical success factors and project success of oil and gas drilling projects

NASA Astrophysics Data System (ADS)

Alagba, Tonye J.

Oil and gas drilling projects are the primary means by which oil companies recover large volumes of commercially available hydrocarbons from deep reservoirs. These types of projects are complex in nature, involving management of multiple stakeholder interfaces, multidisciplinary personnel, complex contractor relationships, and turbulent environmental and market conditions, necessitating the application of proven project management best practices and critical success factors (CSFs) to achieve success. Although there is some practitioner oriented literature on project management CSFs for drilling projects, none of these is based on empirical evidence, from research. In addition, the literature has reported alarming rates of oil and gas drilling project failure, which is attributable not to technical factors, but to failure of project management. The aim of this quantitative correlational study therefore, was to discover an empirically verified list of project management CSFs, which consistent application leads to successful implementation of oil and gas drilling projects. The study collected survey data online, from a random sample of 127 oil and gas drilling personnel who were members of LinkedIn's online community "Drilling Supervisors, Managers, and Engineers". The results of the study indicated that 10 project management factors are individually related to project success of oil and gas drilling projects. These 10 CSFs are namely; Project mission, Top management support, Project schedule/plan, Client consultation, Personnel, Technical tasks, Client acceptance, Monitoring and feedback, Communication, and Troubleshooting. In addition, the study found that the relationships between the 10 CSFs and drilling project success is unaffected by participant and project demographics---role of project personnel, and project location. The significance of these findings are both practical, and theoretical. Practically, application of an empirically verified CSFs list to oil and gas drilling projects could help oil companies improve the performance of future drilling projects. Theoretically, the study's findings may help to bridge a gap in the project management CSFs literature, and add to the general project management body of knowledge.

A scalable healthcare information system based on a service-oriented architecture.

PubMed

Yang, Tzu-Hsiang; Sun, Yeali S; Lai, Feipei

2011-06-01

Many existing healthcare information systems are composed of a number of heterogeneous systems and face the important issue of system scalability. This paper first describes the comprehensive healthcare information systems used in National Taiwan University Hospital (NTUH) and then presents a service-oriented architecture (SOA)-based healthcare information system (HIS) based on the service standard HL7. The proposed architecture focuses on system scalability, in terms of both hardware and software. Moreover, we describe how scalability is implemented in rightsizing, service groups, databases, and hardware scalability. Although SOA-based systems sometimes display poor performance, through a performance evaluation of our HIS based on SOA, the average response time for outpatient, inpatient, and emergency HL7Central systems are 0.035, 0.04, and 0.036 s, respectively. The outpatient, inpatient, and emergency WebUI average response times are 0.79, 1.25, and 0.82 s. The scalability of the rightsizing project and our evaluation results show that the SOA HIS we propose provides evidence that SOA can provide system scalability and sustainability in a highly demanding healthcare information system.

Enterprise application architecture development based on DoDAF and TOGAF

NASA Astrophysics Data System (ADS)

Tao, Zhi-Gang; Luo, Yun-Feng; Chen, Chang-Xin; Wang, Ming-Zhe; Ni, Feng

2017-05-01

For the purpose of supporting the design and analysis of enterprise application architecture, here, we report a tailored enterprise application architecture description framework and its corresponding design method. The presented framework can effectively support service-oriented architecting and cloud computing by creating the metadata model based on architecture content framework (ACF), DoDAF metamodel (DM2) and Cloud Computing Modelling Notation (CCMN). The framework also makes an effort to extend and improve the mapping between The Open Group Architecture Framework (TOGAF) application architectural inputs/outputs, deliverables and Department of Defence Architecture Framework (DoDAF)-described models. The roadmap of 52 DoDAF-described models is constructed by creating the metamodels of these described models and analysing the constraint relationship among metamodels. By combining the tailored framework and the roadmap, this article proposes a service-oriented enterprise application architecture development process. Finally, a case study is presented to illustrate the results of implementing the tailored framework in the Southern Base Management Support and Information Platform construction project using the development process proposed by the paper.

Current and future activities of the Observatoire de Haute Provence in Education and Public Outreach

NASA Astrophysics Data System (ADS)

Boër, M.; Ducerf, D.

The Haute Provence Observatory OHP is an observation station located 100km North of Marseille France It performs both astronomical observations and routine atmospheric measurements in the NDSC Network for Data on Stratospheric Changes and several other geophysics national and international networks The site offers also a program directed to the general public the teachers the pupils and the students at all levels In the past two years we reinforced these activities following few guidelines enhance the scientific diffusion activities towards the general public by presenting an exhibition a stronger program for the teachers and the implementation of a project oriented program for the high school and university students We participate also to a curriculum for planetarium attendants We are currently defining the general long term plan for the observatory including a strong EPO program taking advantages of the site visitors facilities guesthouse research group EPO personnel This program will be oriented to the general space and planetary sciences and is prepared in cooperation with both the academic and regional authorities

Knowledge base and sensor bus messaging service architecture for critical tsunami warning and decision-support

NASA Astrophysics Data System (ADS)

Sabeur, Z. A.; Wächter, J.; Middleton, S. E.; Zlatev, Z.; Häner, R.; Hammitzsch, M.; Loewe, P.

2012-04-01

The intelligent management of large volumes of environmental monitoring data for early tsunami warning requires the deployment of robust and scalable service oriented infrastructure that is supported by an agile knowledge-base for critical decision-support In the TRIDEC project (TRIDEC 2010-2013), a sensor observation service bus of the TRIDEC system is being developed for the advancement of complex tsunami event processing and management. Further, a dedicated TRIDEC system knowledge-base is being implemented to enable on-demand access to semantically rich OGC SWE compliant hydrodynamic observations and operationally oriented meta-information to multiple subscribers. TRIDEC decision support requires a scalable and agile real-time processing architecture which enables fast response to evolving subscribers requirements as the tsunami crisis develops. This is also achieved with the support of intelligent processing services which specialise in multi-level fusion methods with relevance feedback and deep learning. The TRIDEC knowledge base development work coupled with that of the generic sensor bus platform shall be presented to demonstrate advanced decision-support with situation awareness in context of tsunami early warning and crisis management.

Implementation of Virtualization Oriented Architecture: A Healthcare Industry Case Study

NASA Astrophysics Data System (ADS)

Rao, G. Subrahmanya Vrk; Parthasarathi, Jinka; Karthik, Sundararaman; Rao, Gvn Appa; Ganesan, Suresh

This paper presents a Virtualization Oriented Architecture (VOA) and an implementation of VOA for Hridaya - a Telemedicine initiative. Hadoop Compute cloud was established at our labs and jobs which require a massive computing capability such as ECG signal analysis were submitted and the study is presented in this current paper. VOA takes advantage of inexpensive community PCs and provides added advantages such as Fault Tolerance, Scalability, Performance, High Availability.

Role of Gist and PHOG Features in Computer-Aided Diagnosis of Tuberculosis without Segmentation

PubMed Central

Chauhan, Arun; Chauhan, Devesh; Rout, Chittaranjan

2014-01-01

Purpose Effective diagnosis of tuberculosis (TB) relies on accurate interpretation of radiological patterns found in a chest radiograph (CXR). Lack of skilled radiologists and other resources, especially in developing countries, hinders its efficient diagnosis. Computer-aided diagnosis (CAD) methods provide second opinion to the radiologists for their findings and thereby assist in better diagnosis of cancer and other diseases including TB. However, existing CAD methods for TB are based on the extraction of textural features from manually or semi-automatically segmented CXRs. These methods are prone to errors and cannot be implemented in X-ray machines for automated classification. Methods Gabor, Gist, histogram of oriented gradients (HOG), and pyramid histogram of oriented gradients (PHOG) features extracted from the whole image can be implemented into existing X-ray machines to discriminate between TB and non-TB CXRs in an automated manner. Localized features were extracted for the above methods using various parameters, such as frequency range, blocks and region of interest. The performance of these features was evaluated against textural features. Two digital CXR image datasets (8-bit DA and 14-bit DB) were used for evaluating the performance of these features. Results Gist (accuracy 94.2% for DA, 86.0% for DB) and PHOG (accuracy 92.3% for DA, 92.0% for DB) features provided better results for both the datasets. These features were implemented to develop a MATLAB toolbox, TB-Xpredict, which is freely available for academic use at http://sourceforge.net/projects/tbxpredict/. This toolbox provides both automated training and prediction modules and does not require expertise in image processing for operation. Conclusion Since the features used in TB-Xpredict do not require segmentation, the toolbox can easily be implemented in X-ray machines. This toolbox can effectively be used for the mass screening of TB in high-burden areas with improved efficiency. PMID:25390291

Effects of people-centred factors on enterprise resource planning implementation project success: empirical evidence from Sri Lanka

NASA Astrophysics Data System (ADS)

Wickramasinghe, Vathsala; Gunawardena, Vathsala

2010-08-01

Extant literature suggests people-centred factors as one of the major areas influencing enterprise resource planning (ERP) implementation project success. Yet, to date, few empirical studies attempted to validate the link between people-centred factors and ERP implementation project success. The purpose of this study is to empirically identify people-centred factors that are critical to ERP implementation projects in Sri Lanka. The study develops and empirically validates a framework for people-centred factors that influence the success of ERP implementation projects. Survey research methodology was used and collected data from 74 ERP implementation projects in Sri Lanka. The people-centred factors of 'project team competence', 'rewards' and 'communication and change' were found to predict significantly the ERP implementation project success.

Meaningful Cost-Benefit Analysis for Service-Oriented Architecture Projects

DTIC Science & Technology

2010-05-01

SOA to identify these activities and shows how those costs come to be commingled with other development and maintenance activities. The paper argues...affected by SOA . To be consistent with the separation suggested above, this paper suggests the following new activities: • Enterprise architecture...Government or Federal Rights License 14. ABSTRACT This paper argues that proper cost-benefit analysis of service-oriented architecture projects is not

A generic, geometric cocalibration method for a combined system of fluorescence molecular tomography and microcomputed tomography with arbitrarily shaped objects.

PubMed

Fu, Jianwei; Yang, Xiaoquan; Wang, Kan; Luo, Qingming; Gong, Hui

2011-12-01

A combined system of fluorescence molecular tomography and microcomputed tomography (FMT&mCT) can provide molecular and anatomical information of small animals in a single study with intrinsically coregistered images. The anatomical information provided by the mCT subsystem is commonly used as a reference to locate the fluorophore distribution or as a priori structural information to improve the performance of FMT. Therefore, the transformation between the coordinate systems of the subsystem needs to be determined in advanced. A cocalibration method for the combined system of FMT&mCT is proposed. First, linear models are adopted to describe the galvano mirrors and the charge-coupled device (CCD) camera in the FMT subsystem. Second, the position and orientation of the galvano mirrors are determined with the input voltages of the galvano mirrors and the markers, whose positions are predetermined. The position, orientation and normalized pixel size of the CCD camera are obtained by analysing the projections of a point-like marker at different positions. Finally, the orientation and position of sources and the corresponding relationship between the detectors and their projections on the image plane are predicted. Because the positions of the markers are acquired with mCT, the registration of the FMT and mCT could be realized by direct image fusion. The accuracy and consistency of this method in the presence of noise is evaluated by computer simulation. Next, a practical implementation for an experimental FMT&mCT system is carried out and validated. The maximum prediction error of the source positions on the surface of a cylindrical phantom is within 0.375 mm and that of the projections of a point-like marker is within 0.629 pixel. Finally, imaging experiments of the fluorophore distribution in a cylindrical phantom and a phantom with a complex shape demonstrate the feasibility of the proposed method. This method is universal in FMT&mCT, which could be performed with no restriction on the system geometry, calibration phantoms or imaging objects.

A generic, geometric cocalibration method for a combined system of fluorescence molecular tomography and microcomputed tomography with arbitrarily shaped objects

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fu Jianwei; Yang Xiaoquan; Wang Kan

2011-12-15

Purpose: A combined system of fluorescence molecular tomography and microcomputed tomography (FMT and mCT) can provide molecular and anatomical information of small animals in a single study with intrinsically coregistered images. The anatomical information provided by the mCT subsystem is commonly used as a reference to locate the fluorophore distribution or as a priori structural information to improve the performance of FMT. Therefore, the transformation between the coordinate systems of the subsystem needs to be determined in advanced. Methods: A cocalibration method for the combined system of FMT and mCT is proposed. First, linear models are adopted to describe themore » galvano mirrors and the charge-coupled device (CCD) camera in the FMT subsystem. Second, the position and orientation of the galvano mirrors are determined with the input voltages of the galvano mirrors and the markers, whose positions are predetermined. The position, orientation and normalized pixel size of the CCD camera are obtained by analysing the projections of a point-like marker at different positions. Finally, the orientation and position of sources and the corresponding relationship between the detectors and their projections on the image plane are predicted. Because the positions of the markers are acquired with mCT, the registration of the FMT and mCT could be realized by direct image fusion. Results: The accuracy and consistency of this method in the presence of noise is evaluated by computer simulation. Next, a practical implementation for an experimental FMT and mCT system is carried out and validated. The maximum prediction error of the source positions on the surface of a cylindrical phantom is within 0.375 mm and that of the projections of a point-like marker is within 0.629 pixel. Finally, imaging experiments of the fluorophore distribution in a cylindrical phantom and a phantom with a complex shape demonstrate the feasibility of the proposed method. Conclusions: This method is universal in FMT and mCT, which could be performed with no restriction on the system geometry, calibration phantoms or imaging objects.« less

Nursing clinical supervision project in a Neonatal Intensive Care and a Special Care Baby Unit: a best practice implementation project.

PubMed

Johansson, Diana

2015-04-17

Clinical supervision is a process of guided reflective practice and is used in the areas of mental health and palliative care. However, within the Neonatal Intensive Care Unit setting, stressful situations may also arise, with no policies for nurses in regards to participation in clinical supervision. With critical incidents, complex family issues and loss of nursing expertise, clinical supervision could be a potential solution to this dilemma. The aims of the project were to investigate if any hospital policies supported clinical supervision. Specifically, the aims were: (i) to conduct an audit of nurses' knowledge on the topic of clinical supervision, (ii) to investigate if nurses were aware of, or had been involved in, any clinical supervision activities conducted in a Neonatal Intensive Care Unit or a Special Care Baby Unit, and (iii) to investigate if records are maintained of any clinical supervision activities held. A three-phase approach was initiated for this project: a baseline audit, implementation of education sessions, and a follow-up audit using the Joanna Briggs Institute Practical Application of Clinical Evidence System and Getting Research into Practice programs. The Neonatal Intensive Care Unit and Special Care Baby Unit have approximately 180 registered nurses working in the units where the project was conducted. The baseline audit included 37 nurses by convenience sampling and the follow-up audit included nine of these nurses. No policy on clinical supervision has been developed to support nurses in the Neonatal Intensive Care Unit and Special Care Baby Unit. The baseline audit found that nurses described clinical supervision as educational and task orientated, and did not equate clinical supervision with a process that could be also described as "guided reflective practice". Following the education sessions, there was a better understanding of what clinical supervision entailed and the benefits that could lead to improved professional practice, but there were no activities in which nurses could engage in this process. Implementation of a pilot project to test the evidence of clinical supervision in the Neonatal Intensive Care and Special Care Baby speciality units should be undertaken with strategies to assess the effectiveness of clinical supervision and the positive aspects that have been reported in the literature. The Joanna Briggs Institute.

Regional approach to building operational level capacity for disaster planning: the case of the Eastern Africa region.

PubMed

Bazeyo, W; Mayega, R W; Orach, G C; Kiguli, J; Mamuya, S; Tabu, J S; Sena, L; Rugigana, E; Mapatano, M; Lewy, D; Mock, N; Burnham, G; Keim, M; Killewo, J

2013-06-01

The Eastern Africa region is regularly affected by a variety of disasters ranging from drought, to human conflict and population displacement. The magnitude of emergencies and response capacities is similar across the region. In order to strengthen public health disaster management capacities at the operational level in six countries of the Eastern Africa region, the USAID-funded leadership project worked through the HEALTH Alliance, a network of seven schools of public health from six countries in the region to train district-level teams. To develop a sustainable regional approach to building operational level capacity for disaster planning. This project was implemented through a higher education leadership initiative. Project activities were spear-headed by a network of Deans and Directors of public health schools within local universities in the Eastern Africa region. The leadership team envisioned a district-oriented systems change strategy. Pre-service and in-service curricula were developed regionally and district teams were formed to attend short training courses. Project activities began with a situational analysis of the disaster management capacity at national and operational levels. The next steps were chronologically the formation of country training teams and training of trainers, the development of a regional disaster management training curriculum and training materials, the cascading of training activities in the region, and the incorporation of emerging issues into the training curriculum. An evaluation model included the analysis of preparedness impact of the training program. The output from the district teams was the creation of individual district-level disaster plans and their implementation. This 4-year project focused on building operational level public health emergency response capacity, which had not previously been part of any national program. Use of the all-hazard approach rather than a scenario-based contingency planning led to the development of a standardized curriculum for training both in-service and pre-service personnel. Materials developed during the implementation phases of the project have been incorporated into public health graduate curricula in the seven schools. This systems-based strategy resulted in demonstrable outcomes related to district preparedness and university engagement in disaster management. University partnerships are an effective method to build district-level disaster planning capacity. Use of a regional network created a standardized approach across six countries.

Developing student collaborations across disciplines, distances, and institutions.

PubMed

Knisley, Jeff; Behravesh, Esfandiar

2010-01-01

Because quantitative biology requires skills and concepts from a disparate collection of different disciplines, the scientists of the near future will increasingly need to rely on collaborations to produce results. Correspondingly, students in disciplines impacted by quantitative biology will need to be taught how to create and engage in such collaborations. In response to this important curricular need, East Tennessee State University and Georgia Technological University/Emory University cooperated in an unprecedented curricular experiment in which theoretically oriented students at East Tennessee State designed biophysical models that were implemented and tested experimentally by biomedical engineers at the Wallace H. Coulter Department of Biomedical Engineering at Georgia Technological University and Emory University. Implementing the collaborations between two institutions allowed an assessment of the student collaborations from before the groups of students had met for the first time until after they had finished their projects, thus providing insight about the formation and conduct of such collaborations that could not have been obtained otherwise.

Developing Student Collaborations across Disciplines, Distances, and Institutions

PubMed Central

Behravesh, Esfandiar

2010-01-01

Because quantitative biology requires skills and concepts from a disparate collection of different disciplines, the scientists of the near future will increasingly need to rely on collaborations to produce results. Correspondingly, students in disciplines impacted by quantitative biology will need to be taught how to create and engage in such collaborations. In response to this important curricular need, East Tennessee State University and Georgia Technological University/Emory University cooperated in an unprecedented curricular experiment in which theoretically oriented students at East Tennessee State designed biophysical models that were implemented and tested experimentally by biomedical engineers at the Wallace H. Coulter Department of Biomedical Engineering at Georgia Technological University and Emory University. Implementing the collaborations between two institutions allowed an assessment of the student collaborations from before the groups of students had met for the first time until after they had finished their projects, thus providing insight about the formation and conduct of such collaborations that could not have been obtained otherwise. PMID:20810970

Selected issues of the universal communication environment implementation for CII standard

NASA Astrophysics Data System (ADS)

Zagoździńska, Agnieszka; Poźniak, Krzysztof T.; Drabik, Paweł K.

2011-10-01

In the contemporary FPGA market there is the wide assortment of structures, integrated development environments, and boards of different producers. The variety allows to fit resources to requirements of the individual designer. There is the need of standardization of the projects to make it useful in research laboratories equipped with different producers tools. Proposed solution is CII standardization of VHDL components. This paper contains specification of the universal communication environment for CII standard. The link can be used in different FPGA structures. Implementation of the link enables object oriented VHDL programming with the use of CII standardization. The whole environment contains FPGA environment and PC software. The paper contains description of the selected issues of FPGA environment. There is description of some specific solutions that enables environment usage in structures of different producers. The flexibility of different size data transmissions with the use of CII is presented. The specified tool gives the opportunity to use FPGA structures variety fully and design faster and more effectively.

Design and Implementation of the Harvard Fellowship in Patient Safety and Quality.

PubMed

Gandhi, Tejal K; Abookire, Susan A; Kachalia, Allen; Sands, Kenneth; Mort, Elizabeth; Bommarito, Grace; Gagne, Jane; Sato, Luke; Weingart, Saul N

2016-01-01

The Harvard Fellowship in Patient Safety and Quality is a 2-year physician-oriented training program with a strong operational orientation, embedding trainees in the quality departments of participating hospitals. It also integrates didactic and experiential learning and offers the option of obtaining a master's degree in public health. The program focuses on methodologically rigorous improvement and measurement, with an emphasis on the development and implementation of innovative practice. The operational orientation is intended to foster the professional development of future quality and safety leaders. The purpose of this article is to describe the design and development of the fellowship. © The Author(s) 2014.

Estimation of the object orientation and location with the use of MEMS sensors

NASA Astrophysics Data System (ADS)

Sawicki, Aleksander; Walendziuk, Wojciech; Idzkowski, Adam

2015-09-01

The article presents the implementation of the estimation algorithms of orientation in 3D space and the displacement of an object in a 2D space. Moreover, a general orientation storage methods using Euler angles, quaternion and rotation matrix are presented. The experimental part presents the results of the complementary filter implementation. In the study experimental microprocessor module based on STM32f4 Discovery system and myRIO hardware platform equipped with FPGA were used. The attempt to track an object in two-dimensional space, which are showed in the final part of this article, were made with the use of the equipment mentioned above.

Experiences of Agency for Healthcare Research and Quality-funded projects that implemented practices for safer patient care.

PubMed

Taylor, Stephanie L; Ridgely, M Susan; Greenberg, Michael D; Sorbero, Melony E S; Teleki, Stephanie S; Damberg, Cheryl L; Farley, Donna O

2009-04-01

To synthesize lessons learned from the experiences of Agency for Healthcare Research and Quality-funded patient safety projects in implementing safe practices. Self-reported data from individual and group interviews with Original, Challenge, and Partnerships in Implementing Patient Safety (PIPS) grantees, from 2003 to 2006. Interviews with three grantee groups (n=60 total) implementing safe practice projects, with comparisons on factors influencing project implementation and sustainability. Semi-structured protocols contained open-ended questions on lessons learned and more structured questions on factors associated with project implementation and sustainability. The grantees shared common experiences, frequently identifying lessons learned regarding structural components needing to be in place before implementation, components of the implementation process, components of interventions' results needed for sustainability, changes in timelines or activities, unanticipated issues, and staff acceptance/adoption. Also, fewer Original grants had many of the factors related project to implementation/sustainability than the PIPS or Challenge grantees had. Although much of what was reported seemed like common sense, surprisingly few projects actually planned for or expected many of the barriers or facilitators they experienced during their project implementation. Others implementing practice improvements likely will share the experiences and issues identified by these implementation projects and can learn from their lessons.

A Software Designed For STP Data Plot and Analysis Based on Object-oriented Methodology

NASA Astrophysics Data System (ADS)

Lina, L.; Murata, K.

2006-12-01

In the present study, we design a system that is named "STARS (Solar-Terrestrial data Analysis and Reference System)". The STARS provides a research environment that researchers can refer to and analyse a variety of data with single software. This software design is based on the OMT (Object Modeling Technique). The OMT is one of the object-oriented techniques, which has an advantage in maintenance improvement, reuse and long time development of a system. At the Center for Information Technology, Ehime University, after our designing of the STARS, we have already started implementing the STARS. The latest version of the STARS, the STARS5, was released in 2006. Any user can download the system from our WWW site (http:// www.infonet.cite.ehime-u.ac.jp/STARS). The present paper is mainly devoted to the design of a data analysis software system. Through our designing, we paid attention so that the design is flexible and applicable when other developers design software for the similar purpose. If our model is so particular only for our own purpose, it would be useless for other developers. Through our design of the domain object model, we carefully removed the parts, which depend on the system resources, e.g. hardware and software. We put the dependent parts into the application object model. In the present design, therefore, the domain object model and the utility object model are independent of computer resource. This helps anther developer to construct his/her own system based the present design. They simply modify their own application object models according to their system resource. This division of the design between dependent and independent part into three object models is one of the advantages in the OMT. If the design of software is completely done along with the OMT, implementation is rather simple and automatic: developers simply map their designs on our programs. If one creates "ganother STARS" with other programming language such as Java, the programmer simply follows the present system as long as the language is object-oriented language. Researchers would want to add their data into the STARS. In this case, they simply add their own data class in the domain object model. It is because any satellite data has properties such as time or date, which are inherited from the upper class. In this way, their effort is less than in other old methodologies. In the OMT, description format of the system is rather strictly standardized. When new developers take part in STARS project, they have only to understand each model to obtain the overview of the STARS. Then they follow this designs and documents to implement the system. The OMT makes a new comer easy to join into the project already running.

Transforming the Morbidity and Mortality Conference to Promote Safety and Quality in a PICU.

PubMed

Cifra, Christina L; Bembea, Melania M; Fackler, James C; Miller, Marlene R

2016-01-01

Determine the effectiveness of a structured systems-oriented morbidity and mortality conference in improving the process of reviewing and responding to adverse events in a PICU. Prospective time series analysis before and after implementation of a systems-oriented morbidity and mortality conference. Single tertiary referral PICU in Baltimore, MD. Thirty-three patients discussed before and 31 patients after implementation of a systems-oriented morbidity and mortality conference over a total of 20 morbidity and mortality conferences, from April 2013 to March 2014. Systems-oriented morbidity and mortality conference incorporating elements of medical incident analysis. There was a significant increase in meeting attendance (mean, 12 vs 31 attendees per morbidity and mortality conference; p < 0.001) after the systems-oriented morbidity and mortality conference was instituted. There was no significant difference in the mean number of cases suggested (4.2 vs 4.6) or discussed (3.3 vs 3.1) per morbidity and mortality conference. There was also no significant difference in the mean number of adverse events identified per morbidity and mortality conference (3.4 vs 4.3). However, there was an increase in the proportion of cases discussed using a standard case review tool, but this did not reach statistical significance (27% vs 45%; p = 0.231). Nevertheless, we observed a significant increase in the mean number of quality improvement interventions suggested (2.4 vs 5.6; p < 0.001) and implemented (1.7 vs 4.4; p < 0.001) per morbidity and mortality conference. All adverse event categories identified had corresponding interventions suggested after the systems-oriented morbidity and mortality conference was instituted compared with before (80% vs 100%). Intervention-to-adverse event ratios per category were also higher (mean, 0.6 vs 1.5). A structured systems-oriented PICU morbidity and mortality conference incorporating elements of medical incident analysis improves the process of reviewing and responding to adverse events by significantly increasing quality improvement interventions suggested and implemented. Future work would involve testing locally adapted versions of the systems-oriented morbidity and mortality conference in multiple inpatient settings.

Orientational Meliorism, Pragmatist Aesthetics, and the "Bhagavad Gita"

ERIC Educational Resources Information Center

Stroud, Scott R.

2009-01-01

This article develops an understanding of Dewey's aesthetics by connecting it to a project that can be extracted from his overall pragmatist approach--orientational meliorism. As I will argue, Dewey emphasizes the effect that one's mental habits or orientations toward experience and activity has on the quality of one's experience. Orientational…

Feasibility study of a layer-oriented wavefront sensor for solar telescopes: comment.

PubMed

Kellerer, Aglaé

2014-11-10

The future generation of telescopes will be equipped with multi-conjugate adaptive-optics (MCAO) systems in order to obtain high angular resolution over large fields of view. MCAO comes in two flavors: star- and layer-oriented. Existing solar MCAO systems rely exclusively on the star-oriented approach. Earlier we suggested a method to implement the layer-oriented approach, and in view of recent concerns by Marino and Wöger [Appl. Opt.53, 685 (2014)10.1364/AO.53.000685APOPAI1559-128X], we now explain the proposed scheme in further detail. We note that in any layer-oriented system one sensor is conjugated to the pupil and the others are conjugated to higher altitudes. For the latter, not all the sensing surface is illuminated by the entire field of view. The successful implementation of nighttime layer-oriented systems shows that the field reduction is no crucial limitation. In the solar approach the field reduction is directly noticeable because it causes vignetting of the Shack-Hartmann subaperture images. It can be accounted for by a suitable adjustment of the algorithms to calculate the local wavefront slopes. We discuss a further concern related to the optical layout of a layer-oriented solar system.

Monitoring and analysis of the change process in curriculum mapping compared to the National Competency-based Learning Objective Catalogue for Undergraduate Medical Education (NKLM) at four medical faculties. Part II: Key factors for motivating the faculty during the process.

PubMed

Lammerding-Koeppel, Maria; Giesler, Marianne; Gornostayeva, Maryna; Narciss, Elisabeth; Wosnik, Annette; Zipfel, Stephan; Griewatz, Jan; Fritze, Olaf

2017-01-01

Objective: After adoption of the National Competency-based Learning Objectives Catalogue in Medicine [Nationaler Kompetenzbasierter Lernzielkatalog Medizin, NKLM], the German medical faculties are asked to test the learning obejctives recorded in it and evaluate them critically. The faculties require curricular transparency for competence-oriented transition of present curricula, which is best achieved by systematic curriculum mapping in comparison to the NKLM. Based on this inventory, curricula can be further developed target-oriented. Considerable resistance has to be expected when a complex existing curriculum is to be mapped for the first time and a faculty must be convinced of its usefulness. Headed by Tübingen, the faculties of Freiburg, Heidelberg, Mannheim and Tübingen rose to this task. This two-part article analyses and summarises how NKLM curriculum mapping was successful at the locations despite resistance. Part I presented the resources and structures that supported implementation. Part II focuses on factors that motivate individuals and groups of persons to cooperate in the faculties. Method: Both parts used the same method. In short, the joint project was systematically planned following the steps of project and change management and adjusted in the course of the process. From the beginning of the project, a Grounded-Theory approach was used to systematically collect detailed information on measures and developments at the faculties, to continually analyse them and to draw final conclusions. Results: At all sites, faculties, teachers, students and administrative staff were not per se willing to deal with the NKLM and its contents, and even less to map their present curricula. Analysis of the development reflected a number of factors that had either a negative effect on the willingness to cooperate when missing, or a positive one when present. These were: clear top-down and bottom-up management; continuous information of the faculty; user-oriented support in the mapping process by reduction of the mapping categories, portioning and condensation of the NKLM via student pre-mapping (blueprint) and visibility of growing consent. Apart from that, there were a series of frequent questions, objections and concerns that could be countered strategically and by argumentation. They particularly referred to relevance, benefit, feasibility and effort of curriculum mapping. Conclusion: An overview of beneficial framework conditions, strategies and results from different points of view is achieved and interrelations are made visible. Based on literature results, the motivating factors as well as their implementation and effects in the faculties involved are critically reflected on. Recommendations can be derived that can support other faculties in practice.

Monitoring and analysis of the change process in curriculum mapping compared to the National Competency-based Learning Objective Catalogue for Undergraduate Medical Education (NKLM) at four medical faculties. Part II: Key factors for motivating the faculty during the process

PubMed Central

Lammerding-Koeppel, Maria; Giesler, Marianne; Gornostayeva, Maryna; Narciss, Elisabeth; Wosnik, Annette; Zipfel, Stephan; Griewatz, Jan; Fritze, Olaf

2017-01-01

Objective: After adoption of the National Competency-based Learning Objectives Catalogue in Medicine [Nationaler Kompetenzbasierter Lernzielkatalog Medizin, NKLM], the German medical faculties are asked to test the learning obejctives recorded in it and evaluate them critically. The faculties require curricular transparency for competence-oriented transition of present curricula, which is best achieved by systematic curriculum mapping in comparison to the NKLM. Based on this inventory, curricula can be further developed target-oriented. Considerable resistance has to be expected when a complex existing curriculum is to be mapped for the first time and a faculty must be convinced of its usefulness. Headed by Tübingen, the faculties of Freiburg, Heidelberg, Mannheim and Tübingen rose to this task. This two-part article analyses and summarises how NKLM curriculum mapping was successful at the locations despite resistance. Part I presented the resources and structures that supported implementation. Part II focuses on factors that motivate individuals and groups of persons to cooperate in the faculties. Method: Both parts used the same method. In short, the joint project was systematically planned following the steps of project and change management and adjusted in the course of the process. From the beginning of the project, a Grounded-Theory approach was used to systematically collect detailed information on measures and developments at the faculties, to continually analyse them and to draw final conclusions. Results: At all sites, faculties, teachers, students and administrative staff were not per se willing to deal with the NKLM and its contents, and even less to map their present curricula. Analysis of the development reflected a number of factors that had either a negative effect on the willingness to cooperate when missing, or a positive one when present. These were: clear top-down and bottom-up management; continuous information of the faculty; user-oriented support in the mapping process by reduction of the mapping categories, portioning and condensation of the NKLM via student pre-mapping (blueprint) and visibility of growing consent. Apart from that, there were a series of frequent questions, objections and concerns that could be countered strategically and by argumentation. They particularly referred to relevance, benefit, feasibility and effort of curriculum mapping. Conclusion: An overview of beneficial framework conditions, strategies and results from different points of view is achieved and interrelations are made visible. Based on literature results, the motivating factors as well as their implementation and effects in the faculties involved are critically reflected on. Recommendations can be derived that can support other faculties in practice. PMID:28293673

Sociopolitical development of private school children mobilising for disadvantaged others

NASA Astrophysics Data System (ADS)

Hoeg, Darren; Lemelin, Nathalie; Bencze, John Lawrence

2015-12-01

A contemporary focus on democratic decision-making has occurred in school science through curricular developments such as socioscientific issues (SSIs) and Science, Technology, Society and Environment (STSE), creates opportunities for inclusion of activist education. However, it appears these components are often taught, if at all, as simply add-on content. Private schools represent a domain of education that has received relatively little attention in research literature regarding sociopolitical activism for addressing SSIs. In this study, we aimed to document the extent to which private school students were able to implement socioscientific activism and to map their socio-political development in the context of a project on child labour. Data collected from student projects and interviews indicate, in many cases, dramatic development of socially critical views and activist orientations that took place over time, and in various steps. A discussion of the factors enabling students' activist development, such as the school culture, the curriculum, and their teacher, are discussed.

iCarer: AAL for the Informal Carers of the Elderly.

PubMed

Moreno, P A; Garcia-Pacheco, J L; Charvill, J; Lofti, A; Langensiepen, C; Saunders, A; Berckmans, K; Gaspersic, J; Walton, L; Carmona, M; Perez de la Camara, S; Sanchez-de-Madariaga, R; Pozo, J; Muñoz, A; Pascual, M; Gomez, E J

2015-01-01

In the context of the long-term care for older adults, informal carers play a key role. Daily competing priorities or a care-skills deficit may lead them to stress, anxiety and/or depression. The iCarer project (AAL-2012-5-239) proposes the design and implementation of a cloud-inspired personalised and adaptive platform which will offer support to informal carers of older adults with cognitive impairment. By means of a holistic approach comprising technologies and services addressing the intelligent and interactive monitoring of activities, knowledge management for personalised guidance and orientation, virtual interaction, e-learning, care coordination facilities and social network services, iCarer aims to reduce the informal carer stress and to enhance the quality of care they provide, thus improving their quality of life. The iCarer platform will be evaluated through a multi-centre non-controlled study (4 months; 48 homes located in England and in Slovenia). Currently the iCarer project is completing the development work. The evaluation trial is expected to start in August 2015.

Lean sigma--will it work for healthcare?

PubMed

Bahensky, James A; Roe, Janet; Bolton, Romy

2005-01-01

The manufacturing industry has been using Lean Sigma for years in pursuit of continuous improvement to obtain a competitive advantage. The objectives of these efforts are to use the Lean techniques for reducing cycle times and the Six Sigma concepts for reducing product defects. The Iowa Business Council with several advocates worked with the University of Iowa Hospital and Clinics (UIHC) and two other Iowa hospitals to determine whether Lean Sigma is adaptable in healthcare. A team of 15 people at UIHC used the Kaizen Breakthrough Methodology over a five-day period in an aggressive identification and elimination of non-value added activities in Radiology CT scanning. The results exceeded the initial project objectives and indicated that Lean Sigma is applicable in healthcare. Overall, the Lean Sigma project increased revenue by approximately $750,000 per year. The Kaizen process proved to be successful and interesting. Within three days, the team installed new work flow processes. This implementation-oriented approach is what differentiates Lean Sigma from other quality improvement processes.

Three dimensional shape measurement of wear particle by iterative volume intersection

NASA Astrophysics Data System (ADS)

Wu, Hongkun; Li, Ruowei; Liu, Shilong; Rahman, Md Arifur; Liu, Sanchi; Kwok, Ngaiming; Peng, Zhongxiao

2018-04-01

The morphology of wear particle is a fundamental indicator where wear oriented machine health can be assessed. Previous research proved that thorough measurement of the particle shape allows more reliable explanation of the occurred wear mechanism. However, most of current particle measurement techniques are focused on extraction of the two-dimensional (2-D) morphology, while other critical particle features including volume and thickness are not available. As a result, a three-dimensional (3-D) shape measurement method is developed to enable a more comprehensive particle feature description. The developed method is implemented in three steps: (1) particle profiles in multiple views are captured via a camera mounted above a micro fluid channel; (2) a preliminary reconstruction is accomplished by the shape-from-silhouette approach with the collected particle contours; (3) an iterative re-projection process follows to obtain the final 3-D measurement by minimizing the difference between the original and the re-projected contours. Results from real data are presented, demonstrating the feasibility of the proposed method.

Navigations: The Road to a Better Orientation.

PubMed

Rizzo, Leah Heather

2016-01-01

A team of nursing professional development specialists from a large Magnet® healthcare network transformed new employee orientation using a themed, interdisciplinary, learner-centered approach. Guided by project management principles, the nursing professional development team created an engaging program that serves as an interactive guide for new hires' orientation journey. This unique approach differs from traditional orientation programs through its incorporation of gaming, video clips, and group discussions.

You Have One Hour: Developing a Standardized Library Orientation and Evaluating Student Learning

ERIC Educational Resources Information Center

Brown, Elizabeth

2017-01-01

Library orientations continue to excite, or plague, instruction librarians everywhere. Reaching first year students early can preempt academic heartache and research woes, yet the question of "what students really need" continues to evolve. This article presents a case study of a large-scale implementation of library orientations. The…

The implementation of contour-based object orientation estimation algorithm in FPGA-based on-board vision system

NASA Astrophysics Data System (ADS)

Alpatov, Boris; Babayan, Pavel; Ershov, Maksim; Strotov, Valery

2016-10-01

This paper describes the implementation of the orientation estimation algorithm in FPGA-based vision system. An approach to estimate an orientation of objects lacking axial symmetry is proposed. Suggested algorithm is intended to estimate orientation of a specific known 3D object based on object 3D model. The proposed orientation estimation algorithm consists of two stages: learning and estimation. Learning stage is devoted to the exploring of studied object. Using 3D model we can gather set of training images by capturing 3D model from viewpoints evenly distributed on a sphere. Sphere points distribution is made by the geosphere principle. Gathered training image set is used for calculating descriptors, which will be used in the estimation stage of the algorithm. The estimation stage is focusing on matching process between an observed image descriptor and the training image descriptors. The experimental research was performed using a set of images of Airbus A380. The proposed orientation estimation algorithm showed good accuracy in all case studies. The real-time performance of the algorithm in FPGA-based vision system was demonstrated.

Implementing Strategic Orientation

ERIC Educational Resources Information Center

Fischer, Arthur K.; Brownback, Sarah

2012-01-01

An HRM case dealing with problems and issues of setting up orientation programs which align with corporate strategy. Discussion concerns how such a case can be used to exhibit the alignment between HRM and business strategy.

An IS Project Management Course Project

ERIC Educational Resources Information Center

Frank, Ronald L.

2010-01-01

Information Systems curricula should provide project management (PM) theory, current practice, and hands-on experience. The schedule usually does not allow time in Analysis and Design courses for development oriented project management instruction other than a short introduction. Similarly, networking courses usually don't put project management…

Directional sinogram interpolation for sparse angular acquisition in cone-beam computed tomography.

PubMed

Zhang, Hua; Sonke, Jan-Jakob

2013-01-01

Cone-beam (CB) computed tomography (CT) is widely used in the field of medical imaging for guidance. Inspired by Betram's directional interpolation (BDI) methods, directional sinogram interpolation (DSI) was implemented to generate more CB projections by optimized (iterative) double-orientation estimation in sinogram space and directional interpolation. A new CBCT was subsequently reconstructed with the Feldkamp algorithm using both the original and interpolated CB projections. The proposed method was evaluated on both phantom and clinical data, and image quality was assessed by correlation ratio (CR) between the interpolated image and a gold standard obtained from full measured projections. Additionally, streak artifact reduction and image blur were assessed. In a CBCT reconstructed by 40 acquired projections over an arc of 360 degree, streak artifacts dropped 20.7% and 6.7% in a thorax phantom, when our method was compared to linear interpolation (LI) and BDI methods. Meanwhile, image blur was assessed by a head-and-neck phantom, where image blur of DSI was 20.1% and 24.3% less than LI and BDI. When our method was compared to LI and DI methods, CR increased by 4.4% and 3.1%. Streak artifacts of sparsely acquired CBCT were decreased by our method and image blur induced by interpolation was constrained to below other interpolation methods.

BBN-Based Portfolio Risk Assessment for NASA Technology R&D Outcome

NASA Technical Reports Server (NTRS)

Geuther, Steven C.; Shih, Ann T.

2016-01-01

The NASA Aeronautics Research Mission Directorate (ARMD) vision falls into six strategic thrusts that are aimed to support the challenges of the Next Generation Air Transportation System (NextGen). In order to achieve the goals of the ARMD vision, the Airspace Operations and Safety Program (AOSP) is committed to developing and delivering new technologies. To meet the dual challenges of constrained resources and timely technology delivery, program portfolio risk assessment is critical for communication and decision-making. This paper describes how Bayesian Belief Network (BBN) is applied to assess the probability of a technology meeting the expected outcome. The network takes into account the different risk factors of technology development and implementation phases. The use of BBNs allows for all technologies of projects in a program portfolio to be separately examined and compared. In addition, the technology interaction effects are modeled through the application of object-oriented BBNs. The paper discusses the development of simplified project risk BBNs and presents various risk results. The results presented include the probability of project risks not meeting success criteria, the risk drivers under uncertainty via sensitivity analysis, and what-if analysis. Finally, the paper shows how program portfolio risk can be assessed using risk results from BBNs of projects in the portfolio.

International Interdisciplinary Research Institute Project in Senegal

NASA Astrophysics Data System (ADS)

Gueye, Paul

2010-02-01

The project of an interdisciplinary research institute in Senegal was initiated in 1993 in Senegal (West Africa) and became a template for a similar project in the US in 1999. Since then, numerous meetings and presentations have been held at various national and international institutions, workshops and conferences. The current development of this partnership includes drafts for a full design of all systems at each facility, as well as the physics, applied health and educational programs to be implemented. The Senegal facility was conceived for scientific capacity building and equally to act as a focal point aimed at using the local scientific expertise. An anticipated outcome would be a contribution to the reduction of an ever-growing brain drain process suffered by the country, and the African continent in general. The development of the project led also to a strong African orientation of the facility: built for international collaboration, it is to be a pan-African endeavor and to serve primarily African countries. The facility received a presidential approval in a 2003 meeting and will develop an interdisciplinary program centered on a strong materials science research which will also allow for the establishment of an advanced analytical (physical chemistry) laboratory. A central part of the facility will be linked to state-of-the art accelerator mass spectrometry, cyclotron and low energy electromagnetic accelerator systems. )

The DPACS project at the University of Trieste.

PubMed

Fioravanti, F; Inchingolo, P; Valenzin, G; Dalla Palma, L

1997-01-01

The DPACS project (Data and Picture Archiving and Communication System) was undertaken at the University of Trieste by the Institute of Radiology and the DEEI (Dipartimento di Elettrotecnica, Elettronica ed Informatica), in collaboration with the CRSTBS (Centro Ricerche e Studi Tecnologie Biomediche Sanitarie) of the Area Science Park and the Azienda Ospedaliera of Trieste. The main objective of this project is to create an open system for the management of clinical data and images and for the integration of health care services. The first phase is oriented toward finding an implementation strategy for the creation of a prototype DPACS system, to serve as a starting point for the realization of a distributed structure for the extension of the service, firstly to the entire structure of the Cattinara Hospital and subsequently to all the Public Health units in Trieste. After local testing, the service will finally be expanded to a wider geographical level. The intensive computerization of the Institute of Radiology furnished the most favourable environment for the verification of the prototype, as the service provided by the existing RIS (Radiology Information System) and PACS (Picture and Archiving Communication System) has long been consolidated. One of the main goals of the project, in particular, is to replace the old, by now obsolete, PACS with the DPACS services.

Aspect-Oriented Model-Driven Software Product Line Engineering

NASA Astrophysics Data System (ADS)

Groher, Iris; Voelter, Markus

Software product line engineering aims to reduce development time, effort, cost, and complexity by taking advantage of the commonality within a portfolio of similar products. The effectiveness of a software product line approach directly depends on how well feature variability within the portfolio is implemented and managed throughout the development lifecycle, from early analysis through maintenance and evolution. This article presents an approach that facilitates variability implementation, management, and tracing by integrating model-driven and aspect-oriented software development. Features are separated in models and composed of aspect-oriented composition techniques on model level. Model transformations support the transition from problem to solution space models. Aspect-oriented techniques enable the explicit expression and modularization of variability on model, template, and code level. The presented concepts are illustrated with a case study of a home automation system.

The effects of selected pre-treatments on germination of seeds of Oriental hornbeam (Carpinus orientalis).

PubMed

Ozel, Halil Bariş

2016-07-01

In the present study, the effect of some pre-treatments implemented on seeds of Oriental hornbeam (Carpinus orientalis), which has wide geographical variation along Turkey on germination percentage values were investigated. For this purpose, 13 different pre-treatments were implemented to seeds obtained from 17 different populations. According to the obtained results (except control seeds), pre-treatments leading to lowest germination percentage value (8.1%) in Oriental hornbeam seeds was PT10: Keeping seeds for 90 min in sulfuric acid, while highest germination percentage (86.58%) has been obtained with pre-treatment PT13: Implementation of 40% dose of Baikal EM1 + Biohoumous mixture to the seeds, while lowest germination percentage (40.50%) was observed on seeds collected from P7 (Bartin-Kozcağiz) population, highest germination percentage was observed in seeds obtained from P17 (Artvin-Hopa) population.

A user-centered, object-oriented methodology for developing Health Information Systems: a Clinical Information System (CIS) example.

PubMed

Konstantinidis, Georgios; Anastassopoulos, George C; Karakos, Alexandros S; Anagnostou, Emmanouil; Danielides, Vasileios

2012-04-01

The aim of this study is to present our perspectives on healthcare analysis and design and the lessons learned from our experience with the development of a distributed, object-oriented Clinical Information System (CIS). In order to overcome known issues regarding development, implementation and finally acceptance of a CIS by the physicians we decided to develop a novel object-oriented methodology by integrating usability principles and techniques in a simplified version of a well established software engineering process (SEP), the Unified Process (UP). A multilayer architecture has been defined and implemented with the use of a vendor application framework. Our first experiences from a pilot implementation of our CIS are positive. This approach allowed us to gain a socio-technical understanding of the domain and enabled us to identify all the important factors that define both the structure and the behavior of a Health Information System.

Investigating the unification of LOFAR-detected powerful AGN in the Boötes field

NASA Astrophysics Data System (ADS)

Morabito, Leah K.; Williams, W. L.; Duncan, Kenneth J.; Röttgering, H. J. A.; Miley, George; Saxena, Aayush; Barthel, Peter; Best, P. N.; Bruggen, M.; Brunetti, G.; Chyży, K. T.; Engels, D.; Hardcastle, M. J.; Harwood, J. J.; Jarvis, Matt J.; Mahony, E. K.; Prandoni, I.; Shimwell, T. W.; Shulevski, A.; Tasse, C.

2017-08-01

Low radio frequency surveys are important for testing unified models of radio-loud quasars and radio galaxies. Intrinsically similar sources that are randomly oriented on the sky will have different projected linear sizes. Measuring the projected linear sizes of these sources provides an indication of their orientation. Steep-spectrum isotropic radio emission allows for orientation-free sample selection at low radio frequencies. We use a new radio survey of the Boötes field at 150 MHz made with the Low-Frequency Array (LOFAR) to select a sample of radio sources. We identify 60 radio sources with powers P > 1025.5 W Hz-1 at 150 MHz using cross-matched multiwavelength information from the AGN and Galaxy Evolution Survey, which provides spectroscopic redshifts and photometric identification of 16 quasars and 44 radio galaxies. When considering the radio spectral slope only, we find that radio sources with steep spectra have projected linear sizes that are on average 4.4 ± 1.4 larger than those with flat spectra. The projected linear sizes of radio galaxies are on average 3.1 ± 1.0 larger than those of quasars (2.0 ± 0.3 after correcting for redshift evolution). Combining these results with three previous surveys, we find that the projected linear sizes of radio galaxies and quasars depend on redshift but not on power. The projected linear size ratio does not correlate with either parameter. The LOFAR data are consistent within the uncertainties with theoretical predictions of the correlation between the quasar fraction and linear size ratio, based on an orientation-based unification scheme.

Variables influencing food perception reviewed for consumer-oriented product development.

PubMed

Sijtsema, Siet; Linnemann, Anita; van Gaasbeek, Ton; Dagevos, Hans; Jongen, Wim

2002-01-01

Consumer wishes have to be translated into product characteristics to implement consumer-oriented product development. Before this step can be made, insight in food-related behavior and perception of consumers is necessary to make the right, useful, and successful translation. Food choice behavior and consumers' perception are studied in many disciplines. Models of food behavior and preferences therefore were studied from a multidisciplinary perspective. Nearly all models structure the determinants related to the person, the food, and the environment. Consequently, the overview of models was used as a basis to structure the variables influencing food perception into a model for consumer-oriented product development. To this new model, referred to as food perception model, other variables like time and place as part of consumption moment were added. These are important variables influencing consumers' perception, and therefore of increasing importance to consumer-oriented product development nowadays. In further research, the presented food perception model is used as a tool to implement successful consumer-oriented product development.

Evaluation of electrical power alternatives for the Pacific Northwest

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

This study evaluates the concept of implementation of large-scale energy conservation to reduce end-use demand for electrical energy as an alternative to the need for continued construction of new power plants to meet projected energy requirements for the Pacific Northwest. In particular, the numerical accuracy, economic feasibility, and institutional impact of a conservation-oriented scenario developed by the Natural Resources Defense Council, Inc., is assessed, relative to the energy forecast prepared by the Pacific Northwest Utilities Conference Commission. The results of this study are presented in four detailed sections following an introductory and summary section: Reconstruction and Numerical Evaluation of Alternativemore » Scenario; Economic Analysis; Institutional Impact; and Impact of New National Energy Policy.« less

An Evaluation of the ROSE System

NASA Technical Reports Server (NTRS)

Usher, John M.

2002-01-01

A request-oriented scheduling engine, better known as ROSE, is under development within the Flight Projects Directorate for the purpose of planning and scheduling of the activities and resources associated with the science experiments to be performed aboard the International Space Station (ISS). ROSE is being designed to incrementally process requests from payload developers (PDs) to model and schedule the execution of their science experiments on the ISS. The novelty of the approach comes from its web-based interface permitting the PDs to define their request via the construction of a graphical model to represent their requirements. Based on an examination of the current ROSE implementation, this paper proposes several recommendations for changes to the modeling component and makes mention of other potential applications of the ROSE system.

Orientation Modeling for Amateur Cameras by Matching Image Line Features and Building Vector Data

NASA Astrophysics Data System (ADS)

Hung, C. H.; Chang, W. C.; Chen, L. C.

2016-06-01

With the popularity of geospatial applications, database updating is getting important due to the environmental changes over time. Imagery provides a lower cost and efficient way to update the database. Three dimensional objects can be measured by space intersection using conjugate image points and orientation parameters of cameras. However, precise orientation parameters of light amateur cameras are not always available due to their costliness and heaviness of precision GPS and IMU. To automatize data updating, the correspondence of object vector data and image may be built to improve the accuracy of direct georeferencing. This study contains four major parts, (1) back-projection of object vector data, (2) extraction of image feature lines, (3) object-image feature line matching, and (4) line-based orientation modeling. In order to construct the correspondence of features between an image and a building model, the building vector features were back-projected onto the image using the initial camera orientation from GPS and IMU. Image line features were extracted from the imagery. Afterwards, the matching procedure was done by assessing the similarity between the extracted image features and the back-projected ones. Then, the fourth part utilized line features in orientation modeling. The line-based orientation modeling was performed by the integration of line parametric equations into collinearity condition equations. The experiment data included images with 0.06 m resolution acquired by Canon EOS Mark 5D II camera on a Microdrones MD4-1000 UAV. Experimental results indicate that 2.1 pixel accuracy may be reached, which is equivalent to 0.12 m in the object space.

A Comprehensive Onboarding and Orientation Plan for Neurocritical Care Advanced Practice Providers.

PubMed

Langley, Tamra M; Dority, Jeremy; Fraser, Justin F; Hatton, Kevin W

2018-06-01

As the role of advanced practice providers (APPs) expands to include increasingly complex patient care within the intensive care unit, the educational needs of these providers must also be expanded. An onboarding process was designed for APPs in the neurocritical care service line. Onboarding for new APPs revolved around 5 specific areas: candidate selection, proctor assignment, 3-phased orientation process, remediation, and mentorship. To ensure effective training for APPs, using the most time-conscious approach, the backbone of the process is a structured curriculum. This was developed and integrated within the standard orientation and onboarding process. The curriculum design incorporated measurable learning goals, objective assessments of phased goal achievements, and opportunities for remediation. The neurocritical care service implemented an onboarding process in 2014. Four APPs (3 nurse practitioners and 1 physician assistant) were employed by the department before the implementation of the orientation program. The length of employment ranged from 1 to 4 years. Lack of clinical knowledge and/or sufficient training was cited as reasons for departure from the position in 2 of the 4 APPs, as either self-expression or peer evaluation. Since implementation of this program, 12 APPs have completed the program, of which 10 remain within the division, creating an 83% retention rate. The onboarding process, including a 3-phased, structured orientation plan for neurocritical care, has increased APP retention since its implementation. The educational model, along with proctoring and mentorship, has improved clinical knowledge and increased nurse practitioner retention. A larger-scale study would help to support the validity of this onboarding process.

An innovative program to fund health-oriented student projects and research.

PubMed

Bybee, Ronald F; Thompson, Sharon E

2004-01-01

The price of a university education has increased over the years. As a result, students often graduate with thousands of dollars of debt. Conducting research or developing class projects that require personal expenditures can be overwhelming, if not impossible. Participation in research and in developing projects can enhance a student's educational experience. In an effort to address cost issues and provide an optimal learning experience for all students through participation in projects and research, the College of Health Sciences at the University of Texas at El Paso (UTEP) collaborated with a regional foundation to fund health-oriented students' projects and research. Approximately 100 projects have been funded in amounts from 200 dollars to 10,000 dollars at UTEP. Similar programs can be replicated at other US universities. Establishing a general fund and identifying contributors may be a viable option, although finding a foundation or agency to fund the project poses a challenge.

[Acceptance of the Implementation of Standardised Patient Education Programmes by the Multidisciplinary Rehabilitation Team Using the Example of a Back School - A Qualitative Study].

PubMed

Peters, S; Schultze, A; Pfeifer, K; Faller, H; Meng, K

2016-03-01

The transfer of standardised patient education programmes into practice is a complex process with a multitude of influencing factors. Determinants relate among others to the organisation and individuals (e. g., practitioner, patient). Knowledge about individual factors regarding the trainers of patient education programmes in the German rehabilitation system is scarce. The aim of this study is to explore the acceptance of trainers concerning the implementation of a standardised back school and to derive facilitators and barriers to the implementation of patient education programmes. Semi-structured guideline-based interviews were conducted in 10 rehabilitation clinics. The sample consisted of 46 trainers (25 women): 11 physicians, 11 psychologists, 21 physio-/exercise therapists and 3 occupational therapists with a mean age of 41. The opinions of the trainers regarding the central components of back schools in general, their opinions about the new curriculum, their expectations on its implementation, anticipated difficulties with implementation and requests to the project team were explored as indicators for acceptance. The data were analysed with a multi-step qualitative content analysis. 6 main categories comprising 136 subcategories were created and 729 quotations coded. Regarding the central components that should be covered by back schools, back-friendly behaviour was addressed most often. Opinions regarding the new curriculum were mostly positive. Trainers' approval of content and methods was highlighted and the similarity with existing offers in the clinics as well as the structure of the programme were rated positively. The trainers expected an increased patient orientation and personal development as well as a common, coherent language and interdisciplinarity. Difficulties were anticipated regarding time and personnel as well as therapy and appointment planning and also regarding the motivation/acceptance of patients. A wish for communication, education of trainers and feedback was directed at the project team. The study demonstrates high acceptance of programme implementation and central components of modern patient education programmes among trainers. The basis of individual facilitators and barriers has been investigated and might contribute to further development of implementation interventions. Communication and education considering those factors play a central role. © Georg Thieme Verlag KG Stuttgart · New York.

Towards sustainable infrastructure management: knowledge-based service-oriented computing framework for visual analytics

NASA Astrophysics Data System (ADS)

Vatcha, Rashna; Lee, Seok-Won; Murty, Ajeet; Tolone, William; Wang, Xiaoyu; Dou, Wenwen; Chang, Remco; Ribarsky, William; Liu, Wanqiu; Chen, Shen-en; Hauser, Edd

2009-05-01

Infrastructure management (and its associated processes) is complex to understand, perform and thus, hard to make efficient and effective informed decisions. The management involves a multi-faceted operation that requires the most robust data fusion, visualization and decision making. In order to protect and build sustainable critical assets, we present our on-going multi-disciplinary large-scale project that establishes the Integrated Remote Sensing and Visualization (IRSV) system with a focus on supporting bridge structure inspection and management. This project involves specific expertise from civil engineers, computer scientists, geographers, and real-world practitioners from industry, local and federal government agencies. IRSV is being designed to accommodate the essential needs from the following aspects: 1) Better understanding and enforcement of complex inspection process that can bridge the gap between evidence gathering and decision making through the implementation of ontological knowledge engineering system; 2) Aggregation, representation and fusion of complex multi-layered heterogeneous data (i.e. infrared imaging, aerial photos and ground-mounted LIDAR etc.) with domain application knowledge to support machine understandable recommendation system; 3) Robust visualization techniques with large-scale analytical and interactive visualizations that support users' decision making; and 4) Integration of these needs through the flexible Service-oriented Architecture (SOA) framework to compose and provide services on-demand. IRSV is expected to serve as a management and data visualization tool for construction deliverable assurance and infrastructure monitoring both periodically (annually, monthly, even daily if needed) as well as after extreme events.

Teaching of students technology early professional orientation of schoolchildren

NASA Astrophysics Data System (ADS)

Gilmanshina, S. I.; Sagitova, R. N.; Gilmanshin, I. R.; Kamaleeva, A. R.

2017-09-01

The necessity of early professional orientation of schoolchildren on the engineering profession and a new type of teacher was proved. Theoretically substantiated and experimentally tested pedagogical conditions of training of students - future teachers of technology early professional orientation of schoolchildren in the system of university preparation of teacher of a new type. This development of courses of special disciplines, aimed at developing of future teachers of readiness for early career guidance activities; development of interactive group projects for schoolchildren of different age groups (including primary school), expanding their understanding of the world of professions; practical testing of career guidance projects dealing with children’s audience.

Factors that enable and hinder the implementation of projects in the alcohol and other drug field.

PubMed

MacLean, Sarah; Berends, Lynda; Hunter, Barbara; Roberts, Bridget; Mugavin, Janette

2012-02-01

Few studies systematically explore elements of successful project implementation across a range of alcohol and other drug (AOD) activities. This paper provides an evidence base to inform project implementation in the AOD field. We accessed records for 127 completed projects funded by the Alcohol, Education and Rehabilitation Foundation from 2002 to 2008. An adapted realist synthesis methodology enabled us to develop categories of enablers and barriers to successful project implementation, and to identify factors statistically associated with successful project implementation, defined as meeting all funding objectives. Thematic analysis of eight case study projects allowed detailed exploration of findings. Nine enabler and 10 barrier categories were identified. Those most frequently reported as both barriers and enablers concerned partnerships with external agencies and communities, staffing and project design. Achieving supportive relationships with partner agencies and communities, employing skilled staff and implementing consumer or participant input mechanisms were statistically associated with successful project implementation. The framework described here will support development of evidence-based project funding guidelines and project performance indicators. The study provides evidence that investing project hours and resources to develop robust relationships with project partners and communities, implementing mechanisms for consumer or participant input and attracting skilled staff are legitimate and important activities, not just in themselves but because they potentially influence achievement of project funding objectives. © 2012 The Authors. ANZJPH © 2012 Public Health Association of Australia.

Using object-oriented analysis techniques to support system testing

NASA Astrophysics Data System (ADS)

Zucconi, Lin

1990-03-01

Testing of real-time control systems can be greatly facilitated by use of object-oriented and structured analysis modeling techniques. This report describes a project where behavior, process and information models built for a real-time control system were used to augment and aid traditional system testing. The modeling techniques used were an adaptation of the Ward/Mellor method for real-time systems analysis and design (Ward85) for object-oriented development. The models were used to simulate system behavior by means of hand execution of the behavior or state model and the associated process (data and control flow) and information (data) models. The information model, which uses an extended entity-relationship modeling technique, is used to identify application domain objects and their attributes (instance variables). The behavioral model uses state-transition diagrams to describe the state-dependent behavior of the object. The process model uses a transformation schema to describe the operations performed on or by the object. Together, these models provide a means of analyzing and specifying a system in terms of the static and dynamic properties of the objects which it manipulates. The various models were used to simultaneously capture knowledge about both the objects in the application domain and the system implementation. Models were constructed, verified against the software as-built and validated through informal reviews with the developer. These models were then hand-executed.

Mission Data System Java Edition Version 7

NASA Technical Reports Server (NTRS)

Reinholtz, William K.; Wagner, David A.

2013-01-01

The Mission Data System framework defines closed-loop control system abstractions from State Analysis including interfaces for state variables, goals, estimators, and controllers that can be adapted to implement a goal-oriented control system. The framework further provides an execution environment that includes a goal scheduler, execution engine, and fault monitor that support the expression of goal network activity plans. Using these frameworks, adapters can build a goal-oriented control system where activity coordination is verified before execution begins (plan time), and continually during execution. Plan failures including violations of safety constraints expressed in the plan can be handled through automatic re-planning. This version optimizes a number of key interfaces and features to minimize dependencies, performance overhead, and improve reliability. Fault diagnosis and real-time projection capabilities are incorporated. This version enhances earlier versions primarily through optimizations and quality improvements that raise the technology readiness level. Goals explicitly constrain system states over explicit time intervals to eliminate ambiguity about intent, as compared to command-oriented control that only implies persistent intent until another command is sent. A goal network scheduling and verification process ensures that all goals in the plan are achievable before starting execution. Goal failures at runtime can be detected (including predicted failures) and handled by adapted response logic. Responses can include plan repairs (try an alternate tactic to achieve the same goal), goal shedding, ignoring the fault, cancelling the plan, or safing the system.

Using trauma informed care as a nursing model of care in an acute inpatient mental health unit: A practice development process.

PubMed

Isobel, Sophie; Edwards, Clair

2017-02-01

Without agreeing on an explicit approach to care, mental health nurses may resort to problem focused, task oriented practice. Defining a model of care is important but there is also a need to consider the philosophical basis of any model. The use of Trauma Informed Care as a guiding philosophy provides a robust framework from which to review nursing practice. This paper describes a nursing workforce practice development process to implement Trauma Informed Care as an inpatient model of mental health nursing care. Trauma Informed Care is an evidence-based approach to care delivery that is applicable to mental health inpatient units; while there are differing strategies for implementation, there is scope for mental health nurses to take on Trauma Informed Care as a guiding philosophy, a model of care or a practice development project within all of their roles and settings in order to ensure that it has considered, relevant and meaningful implementation. The principles of Trauma Informed Care may also offer guidance for managing workforce stress and distress associated with practice change. © 2016 Australian College of Mental Health Nurses Inc.

Ohio's Career Continuum: Family Life, Motivation, Orientation, Exploration, Vocational Training or Pre-Professional Training, Adult, Technical and Collegiate Training. Career Orientation Program, Grades 7-8. Development Component. Individual Discipline Cluster.

ERIC Educational Resources Information Center

Ohio State Dept. of Education, Columbus.

Skills to be developed by junior high school students (grades 7-8) along with activities and procedures for achieving desired performance objectives for each of the 15 U.S. Office of Education (USOE) occupational clusters are outlined in this career orientation guide, designed to implement the second phase (career orientation) of Ohio's…

Desert architecture for educational buildings, a case study: A center for training university graduates

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ebeid, M.

1996-10-01

A new program for training graduates in desert development is being implemented by the Desert Development Center (DDC) of the American University in Cairo. The facilities consist of fifty bed/sitting rooms for accommodating 100 students. Each unit consists of two rooms and a bathroom for the use of 4 students; a lecture theater which can house 120 students, with adjoining office for trainers as well as necessary facilities; a general cafeteria which can serve 120--150 persons and an adjoining dining room for teaching staff. The cafeteria building also houses the kitchen; a cold storage area; a laundry room, storerooms, sleepingmore » quarters and services for the labor force of the building complex; a system of solar water heaters; and a special sanitary sewage system for treatment of waste water produced by the building`s activities. When designing and implementing this complex, architectural elements and building philosophy based on the concept of integrating with the environment were considered. Elements included orientation heights and building materials suited to the desert environment, thick walls, outer and inner finishing materials, roofs, malkafs, floors, colors, solar heaters, lighting, green areas, windbreaks, terraces, and furniture. The paper includes a general evaluation of this educational building based on the PRA approach (Participatory Rapid Appraisal) involving those living and working in it. As a result of her position with the project, the author was able to evaluate the original designs, recommend modifications, and evaluate their implementation and fulfillment of the original goals of the projects.« less

Implementation strategies to enhance management of heavy alcohol consumption in primary health care: a meta-analysis.

PubMed

Keurhorst, Myrna; van de Glind, Irene; Bitarello do Amaral-Sabadini, Michaela; Anderson, Peter; Kaner, Eileen; Newbury-Birch, Dorothy; Braspenning, Jozé; Wensing, Michel; Heinen, Maud; Laurant, Miranda

2015-12-01

Screening and brief interventions (SBI) delivered in primary health care (PHC) are cost-effective in decreasing alcohol consumption; however, they are underused. This study aims to identify implementation strategies that focus on SBI uptake and measure impact on: (1) heavy drinking and (2) delivery of SBI in PHC. Meta-analysis was conducted of controlled trials of SBI implementation strategies in PHC to reduce heavy drinking. Key outcomes included alcohol consumption, screening, brief interventions and costs in PHC. Predictor measures concerned single versus multiple strategies, type of strategy, duration and physician-only input versus that including mid-level professionals. Standardized mean differences (SMD) were calculated to indicate the impact of implementation strategies on key outcomes. Effect sizes were aggregated using meta-regression models. The 29 included studies were of moderate methodological quality. Strategies had no overall impact on patients' reported alcohol consumption [SMD=0.07; 95% confidence interval (CI)=-0.02 to 0.16], despite improving screening (SMD=0.53; 95% CI=0.28-0.78) and brief intervention delivery (SMD=0.64;95% CI=0.27-1.02). Multi-faceted strategies, i.e. professional and/or organizational and/or patient-orientated strategies, seemed to have strongest effects on patients' alcohol consumption (P<0.05, compared with professional-orientated strategies alone). Regarding SBI delivery, combining professional with patient-orientated implementation strategies had the highest impact (P<0.05). Involving other staff besides physicians was beneficial for screening (P<0.05). To increase delivery of alcohol screening and brief interventions and decrease patients' alcohol consumption, implementation strategies should include a combination of patient-, professional- and organizational-orientated approaches and involve mid-level health professionals as well as physicians. © 2015 Society for the Study of Addiction.

Getting the parking right for transit-oriented development.

DOT National Transportation Integrated Search

2012-03-01

Increasingly MPOs in Texas are incorporating Transit-Oriented Development (TOD) or similar : concepts into their long-range plans for the purpose of achieving sustainable transportation. : One major challenge to implementing these TOD-type strategies...

Statewide transit-oriented development (TOD) study : factors for success in California.

DOT National Transportation Integrated Search

2002-02-01

This special report is intended to provide information to local jurisdictions, transit : agencies, developers, financial institutions, and others as they develop and implement : parking standards and programs for transit-oriented developments (TODs) ...

Implementing clinical process management of vascular wounds in a tertiary facility: impact evaluation of a performance improvement project.

PubMed

Avruscio, Giampiero; Tocco-Tussardi, Ilaria; Bordignon, Greta; Vindigni, Vincenzo

2017-01-01

Chronic vascular wounds have a significant economic and social impact on our society calling for allocation of a great deal of attention and resources. Efforts should be oriented toward the achievement of the most effective and efficient clinical management. The Angiology Unit at the University Hospital of Padova, Italy, developed a performance improvement project to enhance the quality of practice for vascular ulcers. The project consisted in a multistep process comprising a critical revision of the previous clinical process management, staff education, tightening connections between operators and services, and creation of a position for a wound care nurse. The previous standard of practice was modified according to the results of revision and the current evidence-based practice. The new standard of practice reached its full application in September 2015. The number of patients treated and the number of visits in 2015 remained almost unvaried from 2014. However, the total annual expenditure for treating vascular ulcers was reduced by ~60% from the previous year. Standardization of guidelines and practice is effective in creating an efficient clinical management and in reducing the economic burden of vascular ulcers.

Collaborating with Youth to Inform and Develop Tools for Psychotropic Decision Making

PubMed Central

Murphy, Andrea; Gardner, David; Kutcher, Stan; Davidson, Simon; Manion, Ian

2010-01-01

Introduction: Youth oriented and informed resources designed to support psychopharmacotherapeutic decision-making are essentially unavailable. This article outlines the approach taken to design such resources, the product that resulted from the approach taken, and the lessons learned from the process. Methods: A project team with psychopharmacology expertise was assembled. The project team reviewed best practices regarding medication educational materials and related tools to support decisions. Collaboration with key stakeholders who were thought of as primary end-users and target groups occurred. A graphic designer and a plain language consultant were also retained. Results: Through an iterative and collaborative process over approximately 6 months, Med Ed and Med Ed Passport were developed. Literature and input from key stakeholders, in particular youth, was instrumental to the development of the tools and materials within Med Ed. A training program utilizing a train-the-trainer model was developed to facilitate the implementation of Med Ed in Ontario, which is currently ongoing. Conclusion: An evidence-informed process that includes youth and key stakeholder engagement is required for developing tools to support in psychopharmacotherapeutic decision-making. The development process fostered an environment of reciprocity between the project team and key stakeholders. PMID:21037916

Intermediate outcomes of a tribal community public health infrastructure assessment.

PubMed

English, Kevin C; Wallerstein, Nina; Chino, Michelle; Finster, Carolyn E; Rafelito, Alvin; Adeky, Sarah; Kennedy, Marianna

2004-01-01

The purpose of this collaborative participatory project was to assess the strengths and needs of a tribal community as part of a larger public health capacity building program. Key project partners included: the Ramah Band of Navajo Indians, the Albuquerque Area Indian Health Board, the University of New Mexico Masters in Public Health Program, and the University of Nevada, Las Vegas, American Indian Research and Education Center. Principal intervention steps entailed: 1) relationship-building activities among tribal programs and between the Tribe and the scientific community; 2) an orientation to public health; 3) a comprehensive public health infrastructure assessment, utilizing a standardized CDC instrument; and 4) a prioritization of identified needs. The direct outcome was the development and beginning implementation of a community specific public health strategic action plan. Broader results included: 1) increased comprehension of public health within the Tribe; 2) the creation of a community public health task force; 3) the design of a tribally applicable assessment instrument; and 4) improved collaboration between the Tribe and the scientific community. This project demonstrated that public health assessment in tribal communities is feasible and valuable. Further, the development of a tribally applicable instrument highlights a significant tribal contribution to research and assessment.

49 CFR 633.27 - Implementation of a project management plan.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 7 2010-10-01 2010-10-01 false Implementation of a project management plan. 633... TRANSIT ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PROJECT MANAGEMENT OVERSIGHT Project Management Plans § 633.27 Implementation of a project management plan. (a) Upon approval of a project management plan by...

49 CFR 633.27 - Implementation of a project management plan.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 7 2011-10-01 2011-10-01 false Implementation of a project management plan. 633... TRANSIT ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PROJECT MANAGEMENT OVERSIGHT Project Management Plans § 633.27 Implementation of a project management plan. (a) Upon approval of a project management plan by...

49 CFR 633.27 - Implementation of a project management plan.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 7 2012-10-01 2012-10-01 false Implementation of a project management plan. 633... TRANSIT ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PROJECT MANAGEMENT OVERSIGHT Project Management Plans § 633.27 Implementation of a project management plan. (a) Upon approval of a project management plan by...

49 CFR 633.27 - Implementation of a project management plan.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 7 2014-10-01 2014-10-01 false Implementation of a project management plan. 633... TRANSIT ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PROJECT MANAGEMENT OVERSIGHT Project Management Plans § 633.27 Implementation of a project management plan. (a) Upon approval of a project management plan by...

49 CFR 633.27 - Implementation of a project management plan.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 7 2013-10-01 2013-10-01 false Implementation of a project management plan. 633... TRANSIT ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PROJECT MANAGEMENT OVERSIGHT Project Management Plans § 633.27 Implementation of a project management plan. (a) Upon approval of a project management plan by...

Virtual Project Rooms for Education in Engineering

ERIC Educational Resources Information Center

van Vliet, Rudolf G.; Roeling, Monika M.; de Graaff, Rick; Pilot, Albert

2004-01-01

Virtual project rooms (VPRs) may support collaborative project-based learning groups by facilitating project management, documentation and communication. In this study a set of experiments was carried out at Eindhoven University of Technology using the MS Outlook/Exchange software as a groupware platform for design-oriented group projects. The…

The Luneburg Sustainable University Project in International Comparison: An Assessment against North American Peers

ERIC Educational Resources Information Center

Beringer, Almut

2007-01-01

Purpose: To assess the Luneburg Sustainable University Project (the Project) in a non-European international context; to relate the project scholarly approach to selected scholarly and practice-oriented North American sustainability in higher education (SHE) methods; to analyze project innovations against North American initiatives.…

First results of Liguria-Trento transplant network project: a model for a macroregional network and real-time registry in Italy.

PubMed

Valente, R; Cambiaso, F; Santori, G; Ghirelli, R; Gianelli, A; Valente, U

2004-04-01

In Italy, health-care telematic is funded and supported at the level of national government or regional institutions. In 1999, the Italian Ministry of Health started to fund the Liguria-Trento Transplant Network (LTTN) project, a health research project with the aim to build an informative system for donor management and transplantation activity in a macroregional area. At the time of LTTN project proposal, no published Transplant Network Informative System fulfilled Italian rules on telematic management of electronic documentation concerning transplantation activity. Partnership of LTTN project were two Regional Transplant Coordinating Centres, Nord Italia Transplant Interregional Coordinating Centre and the Italian Institute of Health/National Transplant Coordinating Centre. Project Total Quality Management methods were adopted. Technological and case analysis followed ANSI-HL7, CEN-TC251, and Object-Oriented Software Engineering standards. A low-tech prototype powered by a web access relational database is running on a transplant network including web-based clients located in 17 intensive care units, in Nord Italia Transplant Interregional Coordinating Centre, and at the Italian Institute of Health/National Transplant Coordinating Centre. LTTN registry includes pretransplant, surgical, and posttransplant phases regarding liver, kidney, pancreas, and kidney-pancreas transplantation in adult and pediatric recipients. Clinical specifications were prioritized in agreement with the RAND/UCLA appropriateness method. Further implementation will include formal rules for data access and output release, fault tolerance, and a continuous registry evolution plan.

A youth-led social marketing intervention to encourage healthy lifestyles, the EYTO (European Youth Tackling Obesity) project: a cluster randomised controlled0 trial in Catalonia, Spain.

PubMed

Llauradó, Elisabet; Aceves-Martins, Magaly; Tarro, Lucia; Papell-Garcia, Ignasi; Puiggròs, Francesc; Arola, Lluís; Prades-Tena, Jordi; Montagut, Marta; Moragas-Fernández, Carlota M; Solà, Rosa; Giralt, Montse

2015-07-03

The encouragement of healthy lifestyles for obesity prevention in young people is a public health priority. The European Youth Tackling Obesity (EYTO) project is a multicentric intervention project with participation from the United Kingdom, Portugal, the Czech Republic and Spain. The general aim of the EYTO project is to improve lifestyles, including nutritional habits and physical activity practice, and to prevent obesity in socioeconomically disadvantaged and vulnerable adolescents. The EYTO project works through a peer-led social marketing intervention that is designed and implemented by the adolescents of each participating country. Each country involved in the project acts independently. This paper describes the "Som la Pera" intervention Spanish study that is part of the EYTO project. In Spain, the research team performed a cluster randomised controlled intervention over 2 academic years (2013-2015) in which 2 high-schools were designated as the control group and 2 high-schools were designated as the intervention group, with a minimum of 121 schoolchildren per group. From the intervention group, 5 adolescents with leadership characteristics, called "Adolescent Challenge Creators" (ACCs), were recruited. These 5 ACCs received an initial 4 h training session about social marketing principles and healthy lifestyle theory, followed by 24 sessions (1.30 h/session) divided in two academic years to design and implement activities presented as challenges to encourage healthy lifestyles among their peers, the approximately 180-200 high-school students in the intervention group. During the design of the intervention, it was essential that the ACCs used the 8 social marketing criteria (customer orientation, behaviour, theory, insight, exchange, competition, segmentation and methods mix). The expected primary outcomes from the Spanish intervention will be as follows: increases in the consumption of fruits and vegetables and physical activity practice along with reductions in TV/computer/game console use. The secondary outcomes will be as follows: increased breakfast consumption, engagement with local recreation and reduced obesity prevalence. The outcomes will be measured by the Health Behaviour in School-aged Children Study (HBSC) survey at baseline and at the end of the intervention. In the control group, no intervention was implemented, but the outcome measurements were collected in parallel with the intervention group. This study described a new methodology to improve lifestyles and to address adolescent obesity. ClinicalTrials.gov: NCT02157402. Registered 03 June 2014.

Implementation of Multiple Intelligences Supported Project-Based Learning in EFL/ESL Classrooms

ERIC Educational Resources Information Center

Bas, Gokhan

2008-01-01

This article deals with the implementation of Multiple Intelligences supported Project-Based learning in EFL/ESL Classrooms. In this study, after Multiple Intelligences supported Project-based learning was presented shortly, the implementation of this learning method into English classrooms. Implementation process of MI supported Project-based…

Predictive Engineering Tools for Injection-Molded Long-Carbon-Fiber Thermoplastic Composites - Second FY 2015 Quarterly Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nguyen, Ba Nghiep; Fifield, Leonard S.; Kijewski, Seth A.

During the second quarter of FY 2015, the following technical progress has been made toward project milestones: 1) Autodesk reviewed 3D fiber orientation distribution (FOD) comparisons and provided support on improving accuracy. 2) Autodesk reviewed fiber length distribution (FLD) data comparisons and provided suggestions, assisted PNNL in FOD and FLD parameter settings optimization, and advised PNNL on appropriate through thickness thermal conductivity for improved frozen layer effect on FOD predictions. Autodesk also participated in project review meetings including preparations and discussions towards passing the go/no-go decision point. 3) Autodesk implemented an improved FOD inlet profile specification method through the partmore » thickness for 3D meshes and provided an updated ASMI research version to PNNL. 4) The University of Illinois (Prof. C.L. Tucker) provided Autodesk with ideas to improve fiber orientation modeling 5) Purdue University re-measured fiber orientation for the fast-fill 50wt% LCF/PA66 edge-gated plaque, and delivered the fiber orientation data for this plaque at the selected locations (named A, B, and C, Figure 1) to PNNL. Purdue also re-measured fiber orientation for locations A on the fast-fill 30wt% LCF/PP and 50wt% LCF/PA66 center-gated plaques, which exhibited anomalous fiber orientation behavior. 6) Purdue University conducted fiber length measurements and delivered the length data to PNNL for the purge materials (slow-fill 30wt% LCF/PP and 30wt% LCF/PA66 purge materials) and PlastiComp plaques selected on the go/no-go list for fiber length model validation (i.e., slow-fill edge-gated 30wt% LCF/PP and 30wt% LCF/PA66 plaques, Locations A, B, and C). 7) PNNL developed a method to recover intact carbon fibers from LCF/PA66 materials. Isolated fibers were shipped to Purdue for length distribution analysis. 8) PNNL completed ASMI mid-plane analyses for all the PlastiComp plaques defined on the go/no-go list for fiber orientation (FO) model validation and compared the predicted fiber orientations with the measured data provided by Purdue at Locations A, B, and C on these plaques. The 15% accuracy criterion based on evaluation of tensile and bending stiffness was used to assess the accuracy in fiber orientation predictions. 9) PNNL completed ASMI mid-plane analyses for all the PlastiComp plaques defined on the go/no-go list for fiber length distribution (FLD) model validation and compared the predicted length distributions with the measured data provided by Purdue at Locations A, B, and C on these plaques. The 15% accuracy criterion based on evaluation of tensile and bending stiffness was used to assess the accuracy in fiber orientation predictions. 10) PNNL tested the new ASMI version received from Autodesk in March 2015, examined and discussed 3D fiber orientation predictions for PlastiComp plaques. 11) PlastiComp, Inc. (PlastiComp), Toyota Research Institute North America (Toyota) and Magna Exteriors and Interiors Corporation (Magna) participated in discussions with team members on the go/no-go plan. Toyota continued the discussion with Magna on tool modification for molding the complex part in order to achieve the target fiber length in the part.« less

An object-oriented description method of EPMM process

NASA Astrophysics Data System (ADS)

Jiang, Zuo; Yang, Fan

2017-06-01

In order to use the object-oriented mature tools and language in software process model, make the software process model more accord with the industrial standard, it’s necessary to study the object-oriented modelling of software process. Based on the formal process definition in EPMM, considering the characteristics that Petri net is mainly formal modelling tool and combining the Petri net modelling with the object-oriented modelling idea, this paper provides this implementation method to convert EPMM based on Petri net into object models based on object-oriented description.

A Cross-Cultural Study of the Effect of a Graph-Oriented Computer-Assisted Project-Based Learning Environment on Middle School Students' Science Knowledge and Argumentation Skills

ERIC Educational Resources Information Center

Hsu, P.-S.; Van Dyke, M.; Chen, Y.; Smith, T. J.

2016-01-01

The purpose of this mixed-methods study was to explore how seventh graders in a suburban school in the United States and sixth graders in an urban school in Taiwan developed argumentation skills and science knowledge in a project-based learning environment that incorporated a graph-oriented, computer-assisted application (GOCAA). A total of 42…

Enhancing project-oriented learning by joining communities of practice and opening spaces for relatedness

NASA Astrophysics Data System (ADS)

Pascual, R.

2010-03-01

This article describes an extension to project-oriented learning to increase social construction of knowledge and learning. The focus is on: (a) maximising opportunities for students to share their knowledge with practitioners by joining communities of practice, and (b) increasing their intrinsic motivation by creating conditions for student's relatedness. The case study considers a last year capstone course in Mechanical Engineering. The work addresses innovative practices of active learning and beyond project-oriented learning through: (a) the development of a web-based decision support system, (b) meetings between the communities of students, maintenance engineers and academics, and (c) new off-campus group instances. The author hypothesises that this multi-modal approach increases deep learning and social impact of the educational process. Surveys to the actors support a successful achievement of the educational goals. The methodology can easily be extended to further improve the learning process.

Target dependence of orientation and direction selectivity of corticocortical projection neurons in the mouse V1

PubMed Central

Matsui, Teppei; Ohki, Kenichi

2013-01-01

Higher order visual areas that receive input from the primary visual cortex (V1) are specialized for the processing of distinct features of visual information. However, it is still incompletely understood how this functional specialization is acquired. Here we used in vivo two photon calcium imaging in the mouse visual cortex to investigate whether this functional distinction exists at as early as the level of projections from V1 to two higher order visual areas, AL and LM. Specifically, we examined whether sharpness of orientation and direction selectivity and optimal spatial and temporal frequency of projection neurons from V1 to higher order visual areas match with that of target areas. We found that the V1 input to higher order visual areas were indeed functionally distinct: AL preferentially received inputs from V1 that were more orientation and direction selective and tuned for lower spatial frequency compared to projection of V1 to LM, consistent with functional differences between AL and LM. The present findings suggest that selective projections from V1 to higher order visual areas initiates parallel processing of sensory information in the visual cortical network. PMID:24068987

Establishing a community of practice of researchers, practitioners, policy-makers and communities to sustainably manage environmental health risks in Ecuador.

PubMed

Spiegel, Jerry M; Breilh, Jaime; Beltran, Efrain; Parra, Jorge; Solis, Fernanda; Yassi, Annalee; Rojas, Alejandro; Orrego, Elena; Henry, Bonnie; Bowie, William R; Pearce, Laurie; Gaibor, Juan; Velasquez, Patricio; Concepcion, Miriam; Parkes, Margot

2011-11-08

The Sustainably Managing Environmental Health Risk in Ecuador project was launched in 2004 as a partnership linking a large Canadian university with leading Cuban and Mexican institutes to strengthen the capacities of four Ecuadorian universities for leading community-based learning and research in areas as diverse as pesticide poisoning, dengue control, water and sanitation, and disaster preparedness. In implementing curriculum and complementary innovations through application of an ecosystem approach to health, our interdisciplinary international team focused on the question: "Can strengthening of institutional capacities to support a community of practice of researchers, practitioners, policy-makers and communities produce positive health outcomes and improved capacities to sustainably translate knowledge?" To assess progress in achieving desired outcomes, we review results associated with the logic framework analysis used to guide the project, focusing on how a community of practice network has strengthened implementation, including follow-up tracking of program trainees and presentation of two specific case studies. By 2009, train-the-trainer project initiation involved 27 participatory action research Master's theses in 15 communities where 1200 community learners participated in the implementation of associated interventions. This led to establishment of innovative Ecuadorian-led master's and doctoral programs, and a Population Health Observatory on Collective Health, Environment and Society for the Andean region based at the Universidad Andina Simon Bolivar. Building on this network, numerous initiatives were begun, such as an internationally funded research project to strengthen dengue control in the coastal community of Machala, and establishment of a local community eco-health centre focusing on determinants of health near Cuenca. Strengthening capabilities for producing and applying knowledge through direct engagement with affected populations and decision-makers provides a fertile basis for consolidating capacities to act on a larger scale. This can facilitate the capturing of benefits from the "top down" (in consolidating institutional commitments) and the "bottom up" (to achieve local results). Alliances of academic and non-academic partners from the South and North provide a promising orientation for learning together about ways of addressing negative trends of development. Assessing the impacts and sustainability of such processes, however, requires longer term monitoring of results and related challenges.

A Behaviorally-Oriented Activities Therapy Program for Adolescents.

ERIC Educational Resources Information Center

Chasanoff, Enid; Schrader, Carl

1979-01-01

A behaviorally-oriented activities therapy program was designed and implemented with adolescents who manifested problems at school, at home, and with peers. Techniques employed included: contingency contracting, assertiveness training, relaxation training, and cognitive restructuring. (Author/KC)

An ECG storage and retrieval system embedded in client server HIS utilizing object-oriented DB.

PubMed

Wang, C; Ohe, K; Sakurai, T; Nagase, T; Kaihara, S

1996-02-01

In the University of Tokyo Hospital, the improved client server HIS has been applied to clinical practice and physicians can order prescription, laboratory examination, ECG examination and radiographic examination, etc. directly by themselves and read results of these examinations, except medical signal waves, schema and image, on UNIX workstations. Recently, we designed and developed an ECG storage and retrieval system embedded in the client server HIS utilizing object-oriented database to take the first step in dealing with digitized signal, schema and image data and show waves, graphics, and images directly to physicians by the client server HIS. The system was developed based on object-oriented analysis and design, and implemented with object-oriented database management system (OODMS) and C++ programming language. In this paper, we describe the ECG data model, functions of the storage and retrieval system, features of user interface and the result of its implementation in the HIS.

Fidelity of Implementation of a State Antibullying Policy With a Focus on Protected Social Classes.

PubMed

Hall, William J; Chapman, Mimi V

2018-01-01

Bullying threatens the mental and educational well-being of students. All states have enacted antibullying laws. This study surveyed 634 educators about the implementation of the North Carolina School Violence Prevention Act, which enumerated social classes protected from bullying: race, national origin, gender, socioeconomic status, sexual orientation, gender identity, appearance, and disability. Results showed that local antibullying policies most often included race as a protected class and least often included sexual orientation and gender identity. More educators had been trained on bullying based on race than any other social class. Students were more often informed that bullying based on race was prohibited and were least often informed about prohibitions regarding sexual orientation and gender identity. Reporting, investigating, and remediating bullying was highest for racial bullying, followed by disability bullying, and was lowest for bullying based on sexual orientation and gender identity.

Community-Oriented Primary Care in Action: A Dallas Story

PubMed Central

Pickens, Sue; Boumbulian, Paul; Anderson, Ron J.; Ross, Samuel; Phillips, Sharon

2002-01-01

Dallas County, Texas, is the site of the largest urban application of the community-oriented primary care (COPC) model in the United States. We summarize the development and implementation of Dallas’s Parkland Health & Hospital System COPC program. The complexities of implementing and managing this comprehensive community-based program are delineated in terms of Dallas County’s political environment and the components of COPC (assessment, prioritization, community collaboration, health care system, evaluation, and financing). Steps to be taken to ensure the future growth and development of the Dallas program are also considered. The COPC model, as implemented by Parkland, is replicable in other urban areas. PMID:12406794

Object-oriented knowledge representation for expert systems

NASA Technical Reports Server (NTRS)

Scott, Stephen L.

1991-01-01

Object oriented techniques have generated considerable interest in the Artificial Intelligence (AI) community in recent years. This paper discusses an approach for representing expert system knowledge using classes, objects, and message passing. The implementation is in version 4.3 of NASA's C Language Integrated Production System (CLIPS), an expert system tool that does not provide direct support for object oriented design. The method uses programmer imposed conventions and keywords to structure facts, and rules to provide object oriented capabilities.

Investigation of Body Force Effects on Flow Boiling Critical Heat Flux

NASA Technical Reports Server (NTRS)

Zhang, Hui; Mudawar, Issam; Hasan, Mohammad M.

2002-01-01

The bubble coalescence and interfacial instabilities that are important to modeling critical heat flux (CHF) in reduced-gravity systems can be sensitive to even minute body forces. Understanding these complex phenomena is vital to the design and safe implementation of two-phase thermal management loops proposed for space and planetary-based thermal systems. While reduced gravity conditions cannot be accurately simulated in 1g ground-based experiments, such experiments can help isolate the effects of the various forces (body force, surface tension force and inertia) which influence flow boiling CHF. In this project, the effects of the component of body force perpendicular to a heated wall were examined by conducting 1g flow boiling experiments at different orientations. FC-72 liquid was boiled along one wall of a transparent rectangular flow channel that permitted photographic study of the vapor-liquid interface at conditions approaching CHF. High-speed video imaging was employed to capture dominant CHF mechanisms. Six different CHF regimes were identified: Wavy Vapor Layer, Pool Boiling, Stratification, Vapor Counterflow, Vapor Stagnation, and Separated Concurrent Vapor Flow. CHF showed great sensitivity to orientation for flow velocities below 0.2 m/s, where very small CHF values where measured, especially with downflow and downward-facing heated wall orientations. High flow velocities dampened the effects of orientation considerably. Figure I shows representative images for the different CHF regimes. The Wavy Vapor Layer regime was dominant for all high velocities and most orientations, while all other regimes were encountered at low velocities, in the downflow and/or downward-facing heated wall orientations. The Interfacial Lift-off model was modified to predict the effects of orientation on CHF for the dominant Wavy Vapor Layer regime. The photographic study captured a fairly continuous wavy vapor layer travelling along the heated wall while permitting liquid contact only in wetting fronts, located in the troughs of the interfacial waves. CHF commenced when wetting fronts near the outlet were lifted off the wall. The Interfacial Lift-off model is shown to be an effective tool for predicting the effects of body force on CHF at high velocities.

Humane Education Projects Handbook.

ERIC Educational Resources Information Center

Junior League of Ogden, UT.

This handbook was developed to promote interest in humane education and to encourage the adoption of humane education projects. Although specifically designed to assist Junior Leagues in developing such projects, the content should prove valuable to animal welfare organizations, zoos, aquariums, nature centers, and other project-oriented groups…

Computer-assisted learning in human and dental medicine.

PubMed

Höhne, S; Schumann, R R

2004-04-01

This article describes the development and application of new didactic methods for use in computer-assisted teaching and learning systems for training doctors and dentists. Taking the Meducase project as an example, didactic models and their technological implementation are explained, together with the limitations of imparting knowledge with the "new media". In addition, legal concepts for a progressive, pragmatic, and innovative distribution of knowledge to undergraduate students are presented. In conclusion, potential and visions for the wide use of electronic learning in the German and European universities in the future are discussed. Self-directed learning (SDL) is a key component in both undergraduate education and lifelong learning for medical practitioners. E-learning can already be used to promote SDL at undergraduate level. The Meducase project uses self-directed, constructive, case- and problem-oriented learning within a learning platform for medical and dental students. In the long run, e-learning programs can only be successful in education if there is consistent analysis and implementation of value-added factors and the development and use of media-didactic concepts matched to electronic learning. The use of innovative forms of licensing - open source licenses for software and similar licenses for content - facilitates continuous, free access to these programs for all students and teachers. These legal concepts offer the possibility of innovative knowledge distribution, quality assurance and standardization across specializations, university departments, and possibly even national borders.

Simulating Humans as Integral Parts of Spacecraft Missions

NASA Technical Reports Server (NTRS)

Bruins, Anthony C.; Rice, Robert; Nguyen, Lac; Nguyen, Heidi; Saito, Tim; Russell, Elaine

2006-01-01

The Collaborative-Virtual Environment Simulation Tool (C-VEST) software was developed for use in a NASA project entitled "3-D Interactive Digital Virtual Human." The project is oriented toward the use of a comprehensive suite of advanced software tools in computational simulations for the purposes of human-centered design of spacecraft missions and of the spacecraft, space suits, and other equipment to be used on the missions. The C-VEST software affords an unprecedented suite of capabilities for three-dimensional virtual-environment simulations with plug-in interfaces for physiological data, haptic interfaces, plug-and-play software, realtime control, and/or playback control. Mathematical models of the mechanics of the human body and of the aforementioned equipment are implemented in software and integrated to simulate forces exerted on and by astronauts as they work. The computational results can then support the iterative processes of design, building, and testing in applied systems engineering and integration. The results of the simulations provide guidance for devising measures to counteract effects of microgravity on the human body and for the rapid development of virtual (that is, simulated) prototypes of advanced space suits, cockpits, and robots to enhance the productivity, comfort, and safety of astronauts. The unique ability to implement human-in-the-loop immersion also makes the C-VEST software potentially valuable for use in commercial and academic settings beyond the original space-mission setting.

A Planning Study for a Cooperative State-Wide Orientation and Mobility Program for the Blind in Oregon. Project Report.

ERIC Educational Resources Information Center

Multnomah County Intermediate Education District, Portland, OR.

An introduction on blindness is followed by a summary of the initial planning grant proposal for cooperative statewide orientation and mobility program for blind children. Background, development, and utilization of mobility-orientation training are discussed in conjunction with educational programs, guide dogs, canes, mobility readiness,…

Second-order oriented partial-differential equations for denoising in electronic-speckle-pattern interferometry fringes.

PubMed

Tang, Chen; Han, Lin; Ren, Hongwei; Zhou, Dongjian; Chang, Yiming; Wang, Xiaohang; Cui, Xiaolong

2008-10-01

We derive the second-order oriented partial-differential equations (PDEs) for denoising in electronic-speckle-pattern interferometry fringe patterns from two points of view. The first is based on variational methods, and the second is based on controlling diffusion direction. Our oriented PDE models make the diffusion along only the fringe orientation. The main advantage of our filtering method, based on oriented PDE models, is that it is very easy to implement compared with the published filtering methods along the fringe orientation. We demonstrate the performance of our oriented PDE models via application to two computer-simulated and experimentally obtained speckle fringes and compare with related PDE models.

Educational Project Management Instructional System. Module One. Project Management Executive Orientation.

ERIC Educational Resources Information Center

Cummings, C. Peter; Cook, Desmond L.

This module is the first in a self-instructional program designed to train public school personnel in how to manage educational projects. These may include federally funded projects (such as Title I projects), court-ordered programs (such as a desegregation plan), or locally initiated projects (such as a new math program). The purpose of this…

Operations-oriented performance measures for freeway management systems : final report.

DOT National Transportation Integrated Search

2008-12-01

This report describes the second and final year activities of the project titled Using Operations-Oriented Performance Measures to Support Freeway Management Systems. Work activities included developing a prototype system architecture for testi...

A Futures Orientation in the Australian Curriculum: Current Levels of Teacher Interest, Activity and Support in Western Australia

ERIC Educational Resources Information Center

Paynter, Mark; Bruce, Neville

2014-01-01

The soon to be implemented Australian Curriculum aims to integrate a futures orientation across subject areas. Guidelines and support for this specific initiative are being finalized. Only a little is known about the current teaching of a futures orientation or of secondary teacher interest, understanding and support for this important but…

The Importance of Orientation and Mobility Skills for Students Who Are Deaf-Blind. DB-LINK Fact Sheet.

ERIC Educational Resources Information Center

Gense, D. Jay; Gense, Marilyn

This fact sheet about students who are deaf-blind provides information on orientation and mobility (O&M) training. It begins by describing orientation and mobility skills, and emphasizes the need for a team approach in the development and implementation of O&M instruction. Instructional strategies are described, including initial assessment of O&M…

Data Rods: High Speed, Time-Series Analysis of Massive Cryospheric Data Sets Using Object-Oriented Database Methods

NASA Astrophysics Data System (ADS)

Liang, Y.; Gallaher, D. W.; Grant, G.; Lv, Q.

2011-12-01

Change over time, is the central driver of climate change detection. The goal is to diagnose the underlying causes, and make projections into the future. In an effort to optimize this process we have developed the Data Rod model, an object-oriented approach that provides the ability to query grid cell changes and their relationships to neighboring grid cells through time. The time series data is organized in time-centric structures called "data rods." A single data rod can be pictured as the multi-spectral data history at one grid cell: a vertical column of data through time. This resolves the long-standing problem of managing time-series data and opens new possibilities for temporal data analysis. This structure enables rapid time- centric analysis at any grid cell across multiple sensors and satellite platforms. Collections of data rods can be spatially and temporally filtered, statistically analyzed, and aggregated for use with pattern matching algorithms. Likewise, individual image pixels can be extracted to generate multi-spectral imagery at any spatial and temporal location. The Data Rods project has created a series of prototype databases to store and analyze massive datasets containing multi-modality remote sensing data. Using object-oriented technology, this method overcomes the operational limitations of traditional relational databases. To demonstrate the speed and efficiency of time-centric analysis using the Data Rods model, we have developed a sea ice detection algorithm. This application determines the concentration of sea ice in a small spatial region across a long temporal window. If performed using traditional analytical techniques, this task would typically require extensive data downloads and spatial filtering. Using Data Rods databases, the exact spatio-temporal data set is immediately available No extraneous data is downloaded, and all selected data querying occurs transparently on the server side. Moreover, fundamental statistical calculations such as running averages are easily implemented against the time-centric columns of data.

Designing Effective Projects: Decision Options for Maximizing Learning and Project Success

ERIC Educational Resources Information Center

Volkema, Roger J.

2010-01-01

In recent years, more and more business schools have introduced team-based projects into their curricula as a means of addressing corporate, small business, and community-service issues while teaching students a variety of project management skills (technical and sociocultural). In designing a project-oriented course, an instructor has a number of…

Managing Complex Distance Education Projects in a Telework Environment

ERIC Educational Resources Information Center

Ally, Mohamed; Cleveland-Innes, Marti; Wiseman, Colin

2010-01-01

The advances of communication technologies have allowed professionals to work on distance education projects in a telework environment. Managers of these projects must have the skills to manage the projects from a distance. They must be able to select the appropriate team members to work on the project, orient team members, and monitor team…

Health-oriented electronic oral health record: development and evaluation.

PubMed

Wongsapai, Mansuang; Suebnukarn, Siriwan; Rajchagool, Sunsanee; Beach, Daryl; Kawaguchi, Sachiko

2014-06-01

This study aims to develop and evaluate a new Health-oriented Electronic Oral Health Record that implements the health-oriented status and intervention index. The index takes the principles of holistic oral healthcare and applies them to the design and implementation of the Health-oriented Electronic Oral Health Record. We designed an experiment using focus groups and a consensus (Delphi process) method to develop a new health-oriented status and intervention index and graphical user interface. A comparative intervention study with qualitative and quantitative methods was used to compare an existing Electronic Oral Health Record to the Health-oriented Electronic Oral Health Record, focusing on dentist satisfaction, accuracy, and completeness of oral health status recording. The study was conducted by the dental staff of the Inter-country Center for Oral Health collaborative hospitals in Thailand. Overall, the user satisfaction questionnaire had a positive response to the Health-oriented Electronic Oral Health Record. The dentists found it easy to use and were generally satisfied with the impact on their work, oral health services, and surveillance. The dentists were significantly satisfied with the Health-oriented Electronic Oral Health Record compared to the existing Electronic Oral Health Record (p < 0.001). The accuracy and completeness values of the oral health information recorded using the Health-oriented Electronic Oral Health Record were 97.15 and 93.74 percent, respectively. This research concludes that the Health-oriented Electronic Oral Health Record satisfied many dentists, provided benefits to holistic oral healthcare, and facilitated the planning, managing, and evaluation of the healthcare delivery system.

A New Planning Template for Transit-Oriented Development

DOT National Transportation Integrated Search

2001-09-01

The Mineta Transportation Institute (MTI) at San Josi State University assigned a project team to design a planning template for transit-oriented development (TOD) that incorporates an understanding of nonwork travel, that is, trips for shopping, eat...

Integrating evidence-based practices for increasing cancer screenings in safety net health systems: a multiple case study using the Consolidated Framework for Implementation Research.

PubMed

Liang, Shuting; Kegler, Michelle C; Cotter, Megan; Emily, Phillips; Beasley, Derrick; Hermstad, April; Morton, Rentonia; Martinez, Jeremy; Riehman, Kara

2016-08-02

Implementing evidence-based practices (EBPs) to increase cancer screenings in safety net primary care systems has great potential for reducing cancer disparities. Yet there is a gap in understanding the factors and mechanisms that influence EBP implementation within these high-priority systems. Guided by the Consolidated Framework for Implementation Research (CFIR), our study aims to fill this gap with a multiple case study of health care safety net systems that were funded by an American Cancer Society (ACS) grants program to increase breast and colorectal cancer screening rates. The initiative funded 68 safety net systems to increase cancer screening through implementation of evidence-based provider and client-oriented strategies. Data are from a mixed-methods evaluation with nine purposively selected safety net systems. Fifty-two interviews were conducted with project leaders, implementers, and ACS staff. Funded safety net systems were categorized into high-, medium-, and low-performing cases based on the level of EBP implementation. Within- and cross-case analyses were performed to identify CFIR constructs that influenced level of EBP implementation. Of 39 CFIR constructs examined, six distinguished levels of implementation. Two constructs were from the intervention characteristics domain: adaptability and trialability. Three were from the inner setting domain: leadership engagement, tension for change, and access to information and knowledge. Engaging formally appointed internal implementation leaders, from the process domain, also distinguished level of implementation. No constructs from the outer setting or individual characteristics domain differentiated systems by level of implementation. Our study identified a number of influential CFIR constructs and illustrated how they impacted EBP implementation across a variety of safety net systems. Findings may inform future dissemination efforts of EBPs for increasing cancer screening in similar settings. Moreover, our analytic approach is similar to previous case studies using CFIR and hence could facilitate comparisons across studies.

Using Mach threads to control DSN operational sequences

NASA Technical Reports Server (NTRS)

Urista, Juan

1993-01-01

The Link Monitor and Control Operator Assistant prototype (LMCOA) is a state-of-the-art, semiautomated monitor and control system based on an object-oriented design. The purpose of the LMCOA prototyping effort is to both investigate new technology (such as artificial intelligence) to support automation and to evaluate advances in information systems toward developing systems that take advantage of the technology. The emergence of object-oriented design methodology has enabled a major change in how software is designed and developed. This paper describes how the object-oriented approach was used to design and implement the LMCOA and the results of operational testing. The LMCOA is implemented on a NeXT workstation using the Mach operating system and the Objective-C programming language.

Development and evaluation of SOA-based AAL services in real-life environments: a case study and lessons learned.

PubMed

Stav, Erlend; Walderhaug, Ståle; Mikalsen, Marius; Hanke, Sten; Benc, Ivan

2013-11-01

The proper use of ICT services can support seniors in living independently longer. While such services are starting to emerge, current proprietary solutions are often expensive, covering only isolated parts of seniors' needs, and lack support for sharing information between services and between users. For developers, the challenge is that it is complex and time consuming to develop high quality, interoperable services, and new techniques are needed to simplify the development and reduce the development costs. This paper provides the complete view of the experiences gained in the MPOWER project with respect to using model-driven development (MDD) techniques for Service Oriented Architecture (SOA) system development in the Ambient Assisted Living (AAL) domain. To address this challenge, the approach of the European research project MPOWER (2006-2009) was to investigate and record the user needs, define a set of reusable software services based on these needs, and then implement pilot systems using these services. Further, a model-driven toolchain covering key development phases was developed to support software developers through this process. Evaluations were conducted both on the technical artefacts (methodology and tools), and on end user experience from using the pilot systems in trial sites. The outcome of the work on the user needs is a knowledge base recorded as a Unified Modeling Language (UML) model. This comprehensive model describes actors, use cases, and features derived from these. The model further includes the design of a set of software services, including full trace information back to the features and use cases motivating their design. Based on the model, the services were implemented for use in Service Oriented Architecture (SOA) systems, and are publicly available as open source software. The services were successfully used in the realization of two pilot applications. There is therefore a direct and traceable link from the user needs of the elderly, through the service design knowledge base, to the service and pilot implementations. The evaluation of the SOA approach on the developers in the project revealed that SOA is useful with respect to job performance and quality. Furthermore, they think SOA is easy to use and support development of AAL applications. An important finding is that the developers clearly report that they intend to use SOA in the future, but not for all type of projects. With respect to using model-driven development in web services design and implementation, the developers reported that it was useful. However, it is important that the code generated from the models is correct if the full potential of MDD should be achieved. The pilots and their evaluation in the trial sites showed that the services of the platform are sufficient to create suitable systems for end users in the domain. A SOA platform with a set of reusable domain services is a suitable foundation for more rapid development and tailoring of assisted living systems covering reoccurring needs among elderly users. It is feasible to realize a tool-chain for model-driven development of SOA applications in the AAL domain, and such a tool-chain can be accepted and found useful by software developers. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

The good pharmacy practice on Einstein Program at Paraisópolis Community

PubMed Central

de Oliveira, Lara Tânia de Assumpção Domingues Gonçalves; da Silva, Camila Pontes; Guedes, Maria das Vitorias; Sousa, Ana Célia de Oliveira; Sarno, Flávio

2016-01-01

ABSTRACT Objectives: To describe indicators and processes developed and implemented for pharmaceutical assistance at the Einstein Program at Paraisópolis Community pharmacy. Methods: This was a descriptive study of retrospective data from January 2012 to December 2015. Data were obtained from spreadsheets developed for monitoring the productivity and care quality provided at the pharmacy. The evaluated variables were pharmaceutical assistance to prescription, pharmaceutical intervention, orientation (standard and pharmaceutical) and pharmaceutical orientation rate. Results: The pharmacy assisted, on average, 2,308 prescriptions monthly, dispensing 4,871 items, including medications, materials and food supplements. Since March 2015, virtually, the pharmacist analyzed all prescriptions, prior to dispensing. In the analyzed period, there was an increase in monthly pharmaceutical interventions from 7 to 32 on average, and, although there was a decrease in the number of standard orientation, the pharmaceutical orientation had an increase, causing a rise of pharmaceutical orientation rate from 4 to 11%. Conclusion: The processes developed and implemented at the program pharmacy sought to follow the good pharmacy practice, and help patients to make the best use of their medications. PMID:27759833

Effects of organizational context on Lean implementation in five hospital systems.

PubMed

Harrison, Michael I; Paez, Kathryn; Carman, Kristin L; Stephens, Jennifer; Smeeding, Lauren; Devers, Kelly J; Garfinkel, Steven

2016-01-01

Despite broad agreement among researchers about the value of examining how context shapes implementation of improvement programs and projects, limited attention has been paid to contextual effects on implementation of Lean. To help reduce gaps in knowledge of effects of intraorganizational context, we researched Lean implementation initiatives in five organizations and examined 12 of their Lean rapid improvement projects. All projects aimed at improving clinical care delivery. On the basis of the literature on Lean, innovation, and quality improvement, we developed a framework of factors likely to affect Lean implementation and outcomes. Drawing on the framework, we conducted semistructured interviews and applied qualitative codes to the transcribed interviews. Available documents, data, and observations supplemented the interviews. We constructed case studies of Lean implementation in each organization, compared implementation across organizations, and compared the 12 projects. Intraorganizational characteristics affecting organization-wide Lean initiatives and often also shaping project outcomes included CEO commitment to Lean and active support for it, prior organizational capacity for quality improvement-based performance improvement, alignment of the Lean initiative with the organizational mission, dedication of resources and experts to Lean, staff training before and during projects, establishment of measurable and relevant project targets, planning of project sequences that enhance staff capabilities and commitment without overburdening them, and ensuring communication between project members and other affected staff. Dependence of projects on inputs of new information technology was a barrier to project success. Incremental implementation of Lean produced reported improvements in operational efficiency and occasionally in care quality. However, even under the relatively favorable circumstances prevailing in our study sites, incremental implementation did not readily change organizational culture. This study should alert researchers, managers, and teachers of management to ways that contexts shape Lean implementation and may affect other types of process redesign and quality improvement.

Service learning at dementia care programs: an orientation and training program.

PubMed

Lambert-Shute, Jennifer J; Jarrott, Shannon E; Fruhauf, Christine A

2004-01-01

The present paper describes a project that addresses the unique challenge service-learners face at dementia care programs. The project was conducted in conjunction with two courses on aging that offer students a service-learning (S-L) option at a university adult day service (ADS) program that accepts service-learners from these courses. The intervention consisted of two elements: (a) an orientation and follow- up sessions in which students learned about the causes of dementia, the behavioral characteristics exhibited by persons with dementia, and the best methods of interacting effectively with cognitively impaired persons; and (b) a structured scrapbook project for service-learners to exercise their new knowledge and skills. The authors designed the project to increase students' comfort in the dementia care setting and to facilitate students' knowledge of the elderly. The following sections describe the project and its procedures, benefits, and challenges. Recommendations for continuing the project and for adapting the project to other dementia sites are provided.

[Healthy eating: implementation of a practice-oriented training program].

PubMed

Kulakova, E N; Nastausheva, T L; Usacheva, E A

2016-01-01

Health professionals need to have current knowledge and skills in nutrition. The knowledge and skills have to be acquired in programs of continuing medical education, but also in undergraduate medical education. The main purpose of this work was to develop and implement a practice-oriented training program in nutrition and healthy eating for medical students. The subject named "Nutrition" was implemented into second-year medical curriculum. We defined a theoretical framework and terms such as nutrition, healthy eating, and evidence-based nutrition. In order to get learning outcomes we constructed a method of patients counseling and training "Individual food pyramid". The making of "Individual food pyramid" is a key integrate element of the program. It helps to memorize, understand and apply the basic principles of healthy eating in real life contexts. The final program consists of two sections: "General Nutrition" and "Special Nutrition". The most important intended learning outcome is student's lifestyle improvement. The program is practice-oriented and outcome-based.

Error analysis of the crystal orientations obtained by the dictionary approach to EBSD indexing.

PubMed

Ram, Farangis; Wright, Stuart; Singh, Saransh; De Graef, Marc

2017-10-01

The efficacy of the dictionary approach to Electron Back-Scatter Diffraction (EBSD) indexing was evaluated through the analysis of the error in the retrieved crystal orientations. EBSPs simulated by the Callahan-De Graef forward model were used for this purpose. Patterns were noised, distorted, and binned prior to dictionary indexing. Patterns with a high level of noise, with optical distortions, and with a 25 × 25 pixel size, when the error in projection center was 0.7% of the pattern width and the error in specimen tilt was 0.8°, were indexed with a 0.8° mean error in orientation. The same patterns, but 60 × 60 pixel in size, were indexed by the standard 2D Hough transform based approach with almost the same orientation accuracy. Optimal detection parameters in the Hough space were obtained by minimizing the orientation error. It was shown that if the error in detector geometry can be reduced to 0.1% in projection center and 0.1° in specimen tilt, the dictionary approach can retrieve a crystal orientation with a 0.2° accuracy. Copyright © 2017 Elsevier B.V. All rights reserved.

An operational model for mainstreaming ecosystem services for implementation

PubMed Central

Cowling, Richard M.; Egoh, Benis; Knight, Andrew T.; O'Farrell, Patrick J.; Reyers, Belinda; Rouget, Mathieu; Roux, Dirk J.; Welz, Adam; Wilhelm-Rechman, Angelika

2008-01-01

Research on ecosystem services has grown markedly in recent years. However, few studies are embedded in a social process designed to ensure effective management of ecosystem services. Most research has focused only on biophysical and valuation assessments of putative services. As a mission-oriented discipline, ecosystem service research should be user-inspired and user-useful, which will require that researchers respond to stakeholder needs from the outset and collaborate with them in strategy development and implementation. Here we provide a pragmatic operational model for achieving the safeguarding of ecosystem services. The model comprises three phases: assessment, planning, and management. Outcomes of social, biophysical, and valuation assessments are used to identify opportunities and constraints for implementation. The latter then are transformed into user-friendly products to identify, with stakeholders, strategic objectives for implementation (the planning phase). The management phase undertakes and coordinates actions that achieve the protection of ecosystem services and ensure the flow of these services to beneficiaries. This outcome is achieved via mainstreaming, or incorporating the safeguarding of ecosystem services into the policies and practices of sectors that deal with land- and water-use planning. Management needs to be adaptive and should be institutionalized in a suite of learning organizations that are representative of the sectors that are concerned with decision-making and planning. By following the phases of our operational model, projects for safeguarding ecosystem services are likely to empower stakeholders to implement effective on-the-ground management that will achieve resilience of the corresponding social-ecological systems. PMID:18621695

Educators' Experiences Learning to Meet Adaptive Challenges Involving English Learners within the Learning-Oriented Leadership Model: A Qualitative Study

ERIC Educational Resources Information Center

Benis Scheier-Dolberg, Sarah Elizabeth.

2014-01-01

Little is known about how engaging in the learning-oriented leadership model (Drago-Severson, 2004b, 2009, 2012a) can support educators to address the adaptive challenges they encounter in their day-to-day work teaching English learners. My qualitative study examined how 11 educators whose school leaders implement the learning-oriented leadership…

European Higher Education Area and the Introduction of a Quality Assurance Program in Greek Universities: Is Policy-Oriented Learning Present?

ERIC Educational Resources Information Center

Stamelos, George; Kavasakalis, Aggelos

2013-01-01

This paper aims to investigate the production (or not) of policy-oriented learning during the establishment and implementation of a specific policy program in the policy sub-system of the Greek university as well as the interpretation of the existence (or not) of policy-oriented learning. The theoretical tools were drawn mainly from the…

Portable computing - A fielded interactive scientific application in a small off-the-shelf package

NASA Technical Reports Server (NTRS)

Groleau, Nicolas; Hazelton, Lyman; Frainier, Rich; Compton, Michael; Colombano, Silvano; Szolovits, Peter

1993-01-01

Experience with the design and implementation of a portable computing system for STS crew-conducted science is discussed. Principal-Investigator-in-a-Box (PI) will help the SLS-2 astronauts perform vestibular (human orientation system) experiments in flight. PI is an interactive system that provides data acquisition and analysis, experiment step rescheduling, and various other forms of reasoning to astronaut users. The hardware architecture of PI consists of a computer and an analog interface box. 'Off-the-shelf' equipment is employed in the system wherever possible in an effort to use widely available tools and then to add custom functionality and application codes to them. Other projects which can help prospective teams to learn more about portable computing in space are also discussed.

The fracture characteristic of three collinear cracks under true triaxial compression.

PubMed

Liu, Jianjun; Zhu, Zheming; Wang, Bo

2014-01-01

The mechanical behavior of multicracks under compression has become a very important project in the field of fracture mechanics and rock mechanics. In this paper, experimental and numerical studies on the fracture property of three collinear cracks under compression were implemented. The specimens were a square concrete plate, and the cracks were made by a very thin film. The tests were conducted by using true triaxial loading device. In the numerical study, the Abaqus code was employed. The effect of crack orientation and the confining stress on cracked specimen compressive strength were investigated. The results show that the critical stresses of cracked specimens change with crack inclination angles, and, as the angle is 45°, the critical stress is the lowest; the critical stresses increase with the confining stresses.

The Fracture Characteristic of Three Collinear Cracks under True Triaxial Compression

PubMed Central

Liu, Jianjun; Zhu, Zheming; Wang, Bo

2014-01-01

The mechanical behavior of multicracks under compression has become a very important project in the field of fracture mechanics and rock mechanics. In this paper, experimental and numerical studies on the fracture property of three collinear cracks under compression were implemented. The specimens were a square concrete plate, and the cracks were made by a very thin film. The tests were conducted by using true triaxial loading device. In the numerical study, the Abaqus code was employed. The effect of crack orientation and the confining stress on cracked specimen compressive strength were investigated. The results show that the critical stresses of cracked specimens change with crack inclination angles, and, as the angle is 45°, the critical stress is the lowest; the critical stresses increase with the confining stresses. PMID:24790569

Agent-based simulation of a financial market

NASA Astrophysics Data System (ADS)

Raberto, Marco; Cincotti, Silvano; Focardi, Sergio M.; Marchesi, Michele

2001-10-01

This paper introduces an agent-based artificial financial market in which heterogeneous agents trade one single asset through a realistic trading mechanism for price formation. Agents are initially endowed with a finite amount of cash and a given finite portfolio of assets. There is no money-creation process; the total available cash is conserved in time. In each period, agents make random buy and sell decisions that are constrained by available resources, subject to clustering, and dependent on the volatility of previous periods. The model proposed herein is able to reproduce the leptokurtic shape of the probability density of log price returns and the clustering of volatility. Implemented using extreme programming and object-oriented technology, the simulator is a flexible computational experimental facility that can find applications in both academic and industrial research projects.

Multiprocessor smalltalk: Implementation, performance, and analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pallas, J.I.

1990-01-01

Multiprocessor Smalltalk demonstrates the value of object-oriented programming on a multiprocessor. Its implementation and analysis shed light on three areas: concurrent programming in an object oriented language without special extensions, implementation techniques for adapting to multiprocessors, and performance factors in the resulting system. Adding parallelism to Smalltalk code is easy, because programs already use control abstractions like iterators. Smalltalk's basic control and concurrency primitives (lambda expressions, processes and semaphores) can be used to build parallel control abstractions, including parallel iterators, parallel objects, atomic objects, and futures. Language extensions for concurrency are not required. This implementation demonstrates that it is possiblemore » to build an efficient parallel object-oriented programming system and illustrates techniques for doing so. Three modification tools-serialization, replication, and reorganization-adapted the Berkeley Smalltalk interpreter to the Firefly multiprocessor. Multiprocessor Smalltalk's performance shows that the combination of multiprocessing and object-oriented programming can be effective: speedups (relative to the original serial version) exceed 2.0 for five processors on all the benchmarks; the median efficiency is 48%. Analysis shows both where performance is lost and how to improve and generalize the experimental results. Changes in the interpreter to support concurrency add at most 12% overhead; better access to per-process variables could eliminate much of that. Changes in the user code to express concurrency add as much as 70% overhead; this overhead could be reduced to 54% if blocks (lambda expressions) were reentrant. Performance is also lost when the program cannot keep all five processors busy.« less

TAE Plus: Transportable Applications Environment Plus tools for building graphic-oriented applications

NASA Technical Reports Server (NTRS)

Szczur, Martha R.

1989-01-01

The Transportable Applications Environment Plus (TAE Plus), developed by NASA's Goddard Space Flight Center, is a portable User Interface Management System (UIMS), which provides an intuitive WYSIWYG WorkBench for prototyping and designing an application's user interface, integrated with tools for efficiently implementing the designed user interface and effective management of the user interface during an application's active domain. During the development of TAE Plus, many design and implementation decisions were based on the state-of-the-art within graphics workstations, windowing system and object-oriented programming languages. Some of the problems and issues experienced during implementation are discussed. A description of the next development steps planned for TAE Plus is also given.

Ethical issues in action-oriented research in Indonesia.

PubMed

Rachmawaty, Rini

2017-09-01

Action-oriented research is one of the most frequent research types implemented to transform community health in Indonesia. Three researchers and 11 graduate students from a developed country in East Asia conducted a fieldwork program in a remote area in South Sulawesi Province. Although the project was completed, whether or not the international standards for human subject research were applied into that study remains unclear. This study aimed to examine ethical issues raised from that case, analyze constraints to the problems, and recommend alternatives to protect vulnerable populations from being exploited by local/international researchers. A problem-solving approach was used in this study. It began with problem identification, evaluation of the action-oriented research goal, investigation of the constraints to the problem, and recommendation of some relevant alternatives to address the central issue. Ethical Consideration: The approval for conducting the action-oriented research that being investigated in this work was only obtained from the Head of local district. Some ethical issues were found in this case. No special protection for this population, no informed consent was obtained from the participants, exposure to social and economic risks, no future benefits for the subjects, and conflict of interests. Lack of control from the local research ethics committee and lack of competence of local researchers on human subject research were considered as the constraints to the problems. Creating an independent research ethics committee, providing research ethics training to the local researchers, obtaining written/video consents from underserved populations, and meeting local health needs were recommended alternatives to solve these problems. Indonesian government bodies should reform their international collaborative system on research involving human subjects. Exploitation may not occur if all participants as well as all local and national governing bodies understand the research ethics on human subjects and apply it into their practice.

SPINS: standardized protein NMR storage. A data dictionary and object-oriented relational database for archiving protein NMR spectra.

PubMed

Baran, Michael C; Moseley, Hunter N B; Sahota, Gurmukh; Montelione, Gaetano T

2002-10-01

Modern protein NMR spectroscopy laboratories have a rapidly growing need for an easily queried local archival system of raw experimental NMR datasets. SPINS (Standardized ProteIn Nmr Storage) is an object-oriented relational database that provides facilities for high-volume NMR data archival, organization of analyses, and dissemination of results to the public domain by automatic preparation of the header files required for submission of data to the BioMagResBank (BMRB). The current version of SPINS coordinates the process from data collection to BMRB deposition of raw NMR data by standardizing and integrating the storage and retrieval of these data in a local laboratory file system. Additional facilities include a data mining query tool, graphical database administration tools, and a NMRStar v2. 1.1 file generator. SPINS also includes a user-friendly internet-based graphical user interface, which is optionally integrated with Varian VNMR NMR data collection software. This paper provides an overview of the data model underlying the SPINS database system, a description of its implementation in Oracle, and an outline of future plans for the SPINS project.

Addressing food insecurity in a Native American reservation using community-based participatory research.

PubMed

Jernigan, Valarie Blue Bird; Salvatore, Alicia L; Styne, Dennis M; Winkleby, Marilyn

2012-08-01

The food insecurity faced by many Native American communities has numerous implications for the health and welfare of families. To identify and address upstream causes of food insecurity in a rural California reservation, we conducted a community assessment using the Tool for Health and Resilience in Vulnerable Environments (THRIVE). Guided by a community-based participatory research orientation, the THRIVE tool was adapted using digital storytelling and implemented in a series of focus groups. As a result of the THRIVE assessment, community members identified racial injustice and physical and financial barriers to accessing healthy and culturally appropriate foods as areas of greatest importance. Subsequently, the project partnership developed policies to reduce identified barriers which included an integrated community supported agriculture and commodity food program, the introduction of Electronic Benefits Transfer and culturally appropriate foods at the local farmers' market and reallocation of shelf space at the grocery store to include vegetables and fruits as well as special foods for diabetics. Results suggest that a participatory research orientation coupled with the use of a culturally adapted THRIVE tool may be an effective means for identifying structural determinants of food insecurity and initiating novel policy interventions to reduce health disparities experienced by Native American communities.

The nursing process in crisis-oriented psychiatric home care.

PubMed

Boomsma, J; Dingemans, C A; Dassen, T W

1997-08-01

Crisis-oriented psychiatric home care is a recent development in the Dutch mental health care system. Because of the difference between psychiatric care in the home and in the hospital, an action research project was initiated. This project was directed at the nursing process and the nurses' role and skills in psychiatric home care. The main goal of the project was to describe and to standardize nursing diagnoses and interventions used in crisis-oriented and long-term psychiatric home care. The development of supporting methods of assessment and intervention were also important aspects of this project. In this article a crisis-oriented psychiatric home care programme and the first developmental research activities within this programme are described. To support the nursing process, the development of a nursing record and an assessment-format, based on Gordon's Functional Health Patterns (FHP), took place. By means of content analysis of 61 nursing records, the most frequently stated nursing diagnoses, based upon the North American Nursing Diagnosis Association (NANDA) taxonomy, were identified. The psychiatric diagnostic categories of the Diagnostic and Statistical Manual of Mental Disorders (DSM-IV) were also collected. The most common categories found were those of mood disorders and schizophrenia or psychotic disorders. Seventy-five per cent of the nursing diagnoses showed up within four FHP: role-relationship, coping-stress tolerance, self-perception/self-concept and activity-exercise. The nursing diagnosis of 'ineffective individual coping' was stated most frequently. This is not surprising because of the similarities in the definitions of this nursing diagnosis and the concept of 'crisis' to which the psychiatric home care programme is oriented. Further research activities will be focused on standardization of nursing diagnosis and the interventions that nurses undertake in this type of care.

Hebbian based learning with winner-take-all for spiking neural networks

NASA Astrophysics Data System (ADS)

Gupta, Ankur; Long, Lyle

2009-03-01

Learning methods for spiking neural networks are not as well developed as the traditional neural networks that widely use back-propagation training. We propose and implement a Hebbian based learning method with winner-take-all competition for spiking neural networks. This approach is spike time dependent which makes it naturally well suited for a network of spiking neurons. Homeostasis with Hebbian learning is implemented which ensures stability and quicker learning. Homeostasis implies that the net sum of incoming weights associated with a neuron remains the same. Winner-take-all is also implemented for competitive learning between output neurons. We implemented this learning rule on a biologically based vision processing system that we are developing, and use layers of leaky integrate and fire neurons. The network when presented with 4 bars (or Gabor filters) of different orientation learns to recognize the bar orientations (or Gabor filters). After training, each output neuron learns to recognize a bar at specific orientation and responds by firing more vigorously to that bar and less vigorously to others. These neurons are found to have bell shaped tuning curves and are similar to the simple cells experimentally observed by Hubel and Wiesel in the striate cortex of cat and monkey.

Implementation of Metal Casting Best Practices

DOE Office of Scientific and Technical Information (OSTI.GOV)

Eppich, Robert; Naranjo, Robert D.

2007-01-01

The project examined cases where metal casters had implemented ITP research results and the benefits they received due to that implementation. In cases where casters had not implemented those results, the project examined the factors responsible for that lack of implementation. The project also informed metal casters of the free tools and service offered by the ITP Technology Delivery subprogram.

Implementation of a longitudinal mentored scholarly project: an approach at two medical schools.

PubMed

Boninger, Michael; Troen, Philip; Green, Emily; Borkan, Jeffrey; Lance-Jones, Cynthia; Humphrey, Allen; Gruppuso, Philip; Kant, Peter; McGee, James; Willochell, Michael; Schor, Nina; Kanter, Steven L; Levine, Arthur S

2010-03-01

An increasing number of medical schools have implemented or are considering implementing scholarly activity programs as part of their undergraduate medical curricula. The goal of these programs is to foster students' analytical skills, enhance their self-directed learning and their oral and written communication skills, and ultimately to train better physicians. In this article, the authors describe the approach to implementing scholarly activities at a school that requires this activity and at a school where it is elective. Both programs have dealt with significant challenges including orienting students to a complex activity that is fundamentally different than traditional medical school courses and clerkships, helping both students and their mentors understand how to "stay on track" and complete work, especially during the third and fourth years, and educating students and mentors about the responsible conduct of research, especially involving human participants. Both schools have found the implementation process to be evolutionary, requiring experience before faculty could significantly improve processes. A required scholarly activity has highlighted the need for information technology (IT) support, including Web-based document storage and student updates, as well as automatic e-mails alerting supervisory individuals to student activity. Directors of the elective program have found difficulty with both ensuring uniform outcomes across different areas of study and leadership changes in a process that has been largely student-driven. Both programs have found that teamwork, regular meetings, and close communication have helped with implementation. Schools considering the establishment of a scholarly activity should consider these factors when designing programs.

Prescription Drug Monitoring Programs and Pharmacist Orientation Toward Dispensing Controlled Substances.

PubMed

Fendrich, Michael; Bryan, Janelle K; Hooyer, Katinka

2018-01-03

We sought to understand how pharmacists viewed and used a newly implemented prescription drug monitoring program (PDMP). We also sought to understand pharmacist orientation toward dispensing of controlled substances and the people who obtain them. We conducted three mini focus groups. The focus group findings were used to inform the design of a structured survey. We emailed a survey to 160 pharmacists who were employed in one statewide community chain store; we obtained 48 survey responses. Focus groups findings suggested that, in relation to the dispensing of scheduled prescription medication, pharmacists were either "healthcare" oriented, "law-enforcement" oriented, or an orientation that combined these two perspectives. Surveys suggested that pharmacists found PDMPs easy to use and that they used them frequently - often to contact physicians directly. Surveys suggested that pharmacists were typically either "healthcare" oriented or "mixed" (combined perspectives). Pharmacist orientation was associated with the frequency with which they counseled patients about medication risk and the frequency with which they used the PDMP as the basis for contacting prescribers. Ongoing tracking of pharmacists' use of PDMPs is important both at the implementation stage and as PDMPs develop over time. The orientation construct developed here is useful in understanding pharmacist behavior and attitudes towards patients potentially at risk for misuse of controlled substance medications. Further research on this construct could shed light on barriers and incentives for pharmacist PDMP participation and use and provide guidance for pharmacist training, ultimately enhancing patient care.

Multiple case studies of STEM teachers' orientations to science teaching through engineering design

NASA Astrophysics Data System (ADS)

Rupp, Madeline

The following master's thesis is composed of two manuscripts describing STEM teachers' orientations to science teaching through engineering within the context of the Science Learning through Engineering Design (SLED) partnership. The framework guiding both studies was science teaching orientations, a component of pedagogical content knowledge. Data were collected via semi-structured interviews, multi-day classroom observations, pre- and post-observation interviews, implementation plans, and written reflections. Data sources were analyzed to generate two orientations to science teaching through engineering design for each participant. The first manuscript illustrates a single case study conducted with a sixth grade STEM teacher. Results of this study revealed a detailed picture of the teacher's goals, practices, assessments, and general views when teaching science through engineering design. Common themes across the teacher's instruction were used to characterize her orientations to science teaching through engineering design. Overall, the teacher's orientations showed a shift in her practice from didactic to student-centered methods of teaching as a result of integrating engineering design-based curriculum. The second manuscript describes a comparative case study of two sixth grade SLED participants. Results of this study revealed more complex and diverse relationships between the teachers' orientations to teaching science through engineering design and their instruction. Participants' orientations served as filters for instruction, guided by their divergent purposes for science teaching. Furthermore, their orientations and resulting implementation were developed from knowledge gained in teacher education, implying that teacher educators and researchers can use this framework to learn more about how teachers' knowledge is used to integrate engineering and science practices in the K-12 classroom.

Phase 1 studies summary of major findings of the South Bay Salt Pond Restoration Project, South San Francisco Bay, California

USGS Publications Warehouse

Valoppi, Laura

2018-04-02

Executive SummaryThe South Bay Salt Pond Restoration Project (Project) is one of the largest restoration efforts in the United States. It is located in South San Francisco Bay of California. It is unique not only for its size—more than 15,000 acres—but also for its location adjacent to one of the nation’s largest urban areas, home to more than 4 million people (Alameda, Santa Clara, and San Mateo Counties). The Project is intended to restore and enhance wetlands in South San Francisco Bay while providing for flood management, wildlife-oriented public access, and recreation. Restoration goals of the project are to provide a mosaic of saltmarsh habitat to benefit marsh species and managed ponds to benefit waterbirds, throughout 3 complexes and 54 former salt ponds.Although much is known about the project area, significant uncertainties remain with a project of this geographic and temporal scale of an estimated 50 years to complete the restoration. For example, in order to convert anywhere from 50 to 90 percent of the existing managed ponds to saltmarsh habitat, conservation managers first enhance the habitat of managed ponds in order to increase use by waterbirds, and provide migratory, wintering, and nesting habitat for more than 90 species of waterbirds. Project managers have concluded that the best way to address these uncertainties is to carefully implement the project in phases and learn from the outcome of each phase. The Adaptive Management Plan (AMP) identifies specific restoration targets for multiple aspects of the Project and defines triggers that would necessitate some type of management action if a particular aspect is trending negatively. U.S. Geological Survey (USGS) biologist Laura Valoppi served as the project Lead Scientist and oversaw implementation of the AMP in coordination with other members of the Project Management Team (PMT), comprised of representatives from the California State Coastal Conservancy, California Department of Fish and Wildlife, the Santa Clara Valley Water District, the U.S. Army Corps of Engineers, and the U.S. Fish and Wildlife Service.To implement the AMP, the PMT have selected and funded applied studies and monitoring projects to address key uncertainties. This information is used by the PMT to make decisions about current management of the project area and future restoration actions in order to meet project.This document summarizes the major scientific findings from studies conducted from 2009 to 2016, as part of the science program that was conducted in conjunction with Phase 1 restoration and management actions. Additionally, this report summarizes the management response to the study results under the guidance of the AMP framework and provides a list of suggested studies to be conducted in “Phase 2–A scorecard summarizing the Project’s progress toward meeting the AMP goals for a range of Project objectives.” The scoring to date indicates that the Project is meeting or exceeding expectations for sediment accretion and western snowy plover (Charadrius alexandrinus nivosus) recovery. There is uncertainty with respect to objectives for California gulls (Larus californicus), California least tern (Sternula antillarum), steelhead trout (Oncorhynchus mykiss), and regulatory water quality objectives. Water quality and algal blooms, specifically of the managed ponds, is indicated as trending negative. However, the vast majority of objectives are trending positive, including increased abundance for a number of bird guilds, increasing marsh habitat, maintenance of mudflats, visitor experience, estuarine fish numbers, and special-status marsh species numbers.

Food allergies in school: design and evaluation of a teacher-oriented training action.

PubMed

Ravarotto, Licia; Mascarello, Giulia; Pinto, Anna; Schiavo, Maria Rita; Bagni, Marina; Decastelli, Lucia

2014-12-04

Food allergies are perceived as a significant problem in school environments; as a result, a teacher's ability to recognise and deal with allergic reactions is of fundamental importance to protect children's health. This paper includes the results of a study conducted for the purposes of designing, implementing and monitoring a specific set of teacher-oriented communication actions. The study involved designing, implementing and assessing five workshops. These workshops were designed on the basis of the analysis of perceptions and information needs investigated by three focus groups (25 teachers). The level of the teachers' knowledge and appreciation of the workshops was evaluated by using two structured questionnaires (n = 158). The teachers feel that they are insufficiently informed about food allergies; this knowledge gap is confirmed by an analysis of their knowledge before participating in the workshops. According to the teachers, the information which would be most useful to them has to do with the practical management of allergies in school. They feel that there is a lack of a professional contact person for precise and reliable information on health issues. The workshops seem to be appreciated as an information method. In addition, there appears to be a need to involve all children in awareness raising activities and education projects on this subject. There is an urgent need for training actions on food allergies in Italian schools, in particular the communication of practical information regarding the management of allergies and emergencies. More communication between the medical and school staff is, in particular, advisable.

The implementation of a discovery-oriented science education program in a rural elementary school

NASA Astrophysics Data System (ADS)

Liddell, Martha Sue

2000-10-01

This study focused on the implementation of a discovery-oriented science education program at a rural elementary school in Mississippi. The instructional leadership role of the principal was examined in the study through identification and documentation of processes undertaken by the principal to implement a discovery-oriented science education program school. The goal of the study was to develop a suggested approach for implementing a discovery-oriented science education program for principals who wish to become instructional leaders in the area of science education at their schools. Mixed methods were used to collect, analyze, and interpret data. Subjects for the study consisted of teachers, students, and parents. Data were collected through field observation; observations of science education being taught by classroom teachers; examination of the principal's log describing actions taken to implement a discovery-oriented science education program; conducting semi-structured interviews with teachers as the key informants; and examining attitudinal data collected by the Carolina Biological Supply Company for the purpose of measuring attitudes of teachers, students, and parents toward the proposed science education program and the Science and Technology for Children (STC) program piloted at the school. To develop a suggested approach for implementing a discovery-oriented science education program, data collected from field notes, classroom observations, the principal's log of activities, and key informant interviews were analyzed and group into themes pertinent to the study. In addition to descriptive measures, chi-square goodness-of-fit tests were used to determine whether the frequency distribution showed a specific pattern within the attitudinal data collected by the Carolina Biological Supply Company. The pertinent question asked in analyzing data was: Are the differences significant or are they due to chance? An alpha level of .01 was selected to determine statistical significance. Teachers, students, and parents responding to the attitudinal survey concerning science education at the school were asked to mark each of four statements in one of three ways: "Agree," "Unsure," or "Disagree." Teachers, students, and parents were also given the opportunity to make comments. The results of the 1998 attitudinal surveys administered to teachers, students, and parents at the school indicated that teachers at the school generally held negative perceptions about the science education program in place at the school. Students were also generally negative in their opinions about science education at the school and parents were somewhat neutral in their opinions. After the Science and Technology for Children program was implemented at the school site, opinions concerning science education at the school changed. The 1999 attitudinal surveys indicated that teachers, students, and parents at the school expressed more positive than negative responses concerning science education.

From rhetoric to reality? Putting HIV and AIDS rights talk into practice in a South African rural community.

PubMed

Campbell, Catherine; Nair, Yugi

2014-01-01

Whilst international rhetoric on HIV and AIDS frequently invokes discourses of human rights to inspire and guide action, translating universal rights talk into practice in specific settings remains a challenge. Community mobilisation is often strategy of choice. We present a case study of the Entabeni Project in South Africa--in which a foreign-funded NGO sought to work with female health volunteers in a deep rural community to increase their access to two HIV-relevant rights: women's rights (especially gender equality) and rights to health (especially access to HIV- and AIDS-related services). Whilst the project had short-term health-related successes, it was less successful in implementing a gender empowerment agenda. The concept of women's rights had no purchase with women who had little interest in directly challenging male power, foregrounding the fight against poverty as their main preoccupation. The area's traditional chief and gatekeeper insisted the project should remain 'apolitical'. Project funders prioritised 'numbers reached' over a gender empowerment orientation. In the absence of (1) a marginalised group who are willing to assert their rights; and (2) a context where powerful people are willing to support these claims, 'rights' may be a blunt tool for HIV-related work with women in deeply oppressive and remote rural communities beyond the reach of international treaties and urban-based activist movements.

Lessons from NASA Applied Sciences Program: Success Factors in Applying Earth Science in Decision Making

NASA Astrophysics Data System (ADS)

Friedl, L. A.; Cox, L.

2008-12-01

The NASA Applied Sciences Program collaborates with organizations to discover and demonstrate applications of NASA Earth science research and technology to decision making. The desired outcome is for public and private organizations to use NASA Earth science products in innovative applications for sustained, operational uses to enhance their decisions. In addition, the program facilitates the end-user feedback to Earth science to improve products and demands for research. The Program thus serves as a bridge between Earth science research and technology and the applied organizations and end-users with management, policy, and business responsibilities. Since 2002, the Applied Sciences Program has sponsored over 115 applications-oriented projects to apply Earth observations and model products to decision making activities. Projects have spanned numerous topics - agriculture, air quality, water resources, disasters, public health, aviation, etc. The projects have involved government agencies, private companies, universities, non-governmental organizations, and foreign entities in multiple types of teaming arrangements. The paper will examine this set of applications projects and present specific examples of successful use of Earth science in decision making. The paper will discuss scientific, organizational, and management factors that contribute to or impede the integration of the Earth science research in policy and management. The paper will also present new methods the Applied Sciences Program plans to implement to improve linkages between science and end users.

Method for selectively orienting induced fractures in subterranean earth formations

DOEpatents

Shuck, Lowell Z.

1977-02-01

The orientation of hydraulically-induced fractures in relatively deep subterranean earth formations is normally confined to vertical projections along a plane parallel to the maximum naturally occurring (tectonic) compressive stress field. It was found that this plane of maximum compressive stress may be negated and, in effect, re-oriented in a plane projecting generally orthogonal to the original tectonic stress plane by injecting liquid at a sufficiently high pressure into a wellbore fracture oriented in a plane parallel to the plane of tectonic stress for the purpose of stressing the surrounding earth formation in a plane generally orthogonal to the plane of tectonic stress. With the plane of maximum compressive stress re-oriented due to the presence of the induced compressive stress, liquid under pressure is injected into a second wellbore disposed within the zone influenced by the induced compressive stress but at a location in the earth formation laterally spaced from the fracture in the first wellbore for effecting a fracture in the second wellbore along a plane generally orthogonal to the fracture in the first wellbore.

The anatomy of a World Wide Web library service: the BONES demonstration project. Biomedically Oriented Navigator of Electronic Services.

PubMed Central

Schnell, E H

1995-01-01

In 1994, the John A. Prior Health Sciences Library at Ohio State University began to develop a World Wide Web demonstration project, the Biomedically Oriented Navigator of Electronic Services (BONES). The initial intent of BONES was to facilitate the health professional's access to Internet resources by organizing them in a systematic manner. The project not only met this goal but also helped identify the resources needed to launch a full-scale Web library service. This paper discusses the tasks performed and resources used in the development of BONES and describes the creation and organization of documents on the BONES Web server. The paper also discusses the outcomes of the project and the impact on the library's staff and services. PMID:8547903

44 CFR 80.17 - Project implementation.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 44 Emergency Management and Assistance 1 2011-10-01 2011-10-01 false Project implementation. 80.17... RELOCATION FOR OPEN SPACE Post-Award Requirements § 80.17 Project implementation. (a) Hazardous materials. The subgrantee shall take steps to ensure it does not acquire or include in the project properties...

44 CFR 80.17 - Project implementation.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 44 Emergency Management and Assistance 1 2013-10-01 2013-10-01 false Project implementation. 80.17... RELOCATION FOR OPEN SPACE Post-Award Requirements § 80.17 Project implementation. (a) Hazardous materials. The subgrantee shall take steps to ensure it does not acquire or include in the project properties...

44 CFR 80.17 - Project implementation.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 44 Emergency Management and Assistance 1 2014-10-01 2014-10-01 false Project implementation. 80.17... RELOCATION FOR OPEN SPACE Post-Award Requirements § 80.17 Project implementation. (a) Hazardous materials. The subgrantee shall take steps to ensure it does not acquire or include in the project properties...

Unsteady-State Heat Transfer Involving a Phase Change: An Example of a 'Project-Oriented' Undergraduate Laboratory.

ERIC Educational Resources Information Center

Sundberg, Donald C.; Someshwar, Arun V.

1989-01-01

Describes the structure of an in-depth laboratory project chemical engineering. Provides modeling work to guide experimentation and experimental work on heat transfer analysis. Discusses the experimental results and evaluation of the project. (YP)

Creating an inclusive mall environment with the PRECEDE-PROCEED model: a living lab case study.

PubMed

Ahmed, Sara; Swaine, Bonnie; Milot, Marc; Gaudet, Caroline; Poldma, Tiiu; Bartlett, Gillian; Mazer, Barbara; Le Dorze, Guylaine; Barbic, Skye; Rodriguez, Ana Maria; Lefebvre, Hélène; Archambault, Philippe; Kairy, Dahlia; Fung, Joyce; Labbé, Delphine; Lamontagne, Anouk; Kehayia, Eva

2017-10-01

Although public environments provide opportunities for participation and social inclusion, they are not always inclusive spaces and may not accommodate the wide diversity of people. The Rehabilitation Living Lab in the Mall is a unique, interdisciplinary, and multi-sectoral research project with an aim to transform a shopping complex in Montreal, Canada, into an inclusive environment optimizing the participation and social inclusion of all people. The PRECEDE-PROCEDE Model (PPM), a community-oriented and participatory planning model, was applied as a framework. The PPM is comprised of nine steps divided between planning, implementation, and evaluation. The PPM is well suited as a framework for the development of an inclusive mall. Its ecological approach considers the environment, as well as the social and individual factors relating to mall users' needs and expectations. Transforming a mall to be more inclusive is a complex process involving many stakeholders. The PPM allows the synthesis of several sources of information, as well as the identification and prioritization of key issues to address. The PPM also helps to frame and drive the implementation and evaluate the components of the project. This knowledge can help others interested in using the PPM to create similar enabling and inclusive environments world-wide. Implication for rehabilitation While public environments provide opportunities for participation and social inclusion, they are not always inclusive spaces and may not accommodate the wide diversity of people. The PRECEDE PROCEDE Model (PPM) is well suited as a framework for the development, implementation, and evaluation of an inclusive mall. Environmental barriers can negatively impact the rehabilitation process by impeding the restoration and augmentation of function. Removing barriers to social participation and independent living by improving inclusivity in the mall and other environments positively impacts the lives of people with disabilities.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Krempien, Robert; Hoppe, Harald; Kahrs, Lueder

Purpose: The aim of this study is to implement augmented reality in real-time image-guided interstitial brachytherapy to allow an intuitive real-time intraoperative orientation. Methods and Materials: The developed system consists of a common video projector, two high-resolution charge coupled device cameras, and an off-the-shelf notebook. The projector was used as a scanning device by projecting coded-light patterns to register the patient and superimpose the operating field with planning data and additional information in arbitrary colors. Subsequent movements of the nonfixed patient were detected by means of stereoscopically tracking passive markers attached to the patient. Results: In a first clinical study,more » we evaluated the whole process chain from image acquisition to data projection and determined overall accuracy with 10 patients undergoing implantation. The described method enabled the surgeon to visualize planning data on top of any preoperatively segmented and triangulated surface (skin) with direct line of sight during the operation. Furthermore, the tracking system allowed dynamic adjustment of the data to the patient's current position and therefore eliminated the need for rigid fixation. Because of soft-part displacement, we obtained an average deviation of 1.1 mm by moving the patient, whereas changing the projector's position resulted in an average deviation of 0.9 mm. Mean deviation of all needles of an implant was 1.4 mm (range, 0.3-2.7 mm). Conclusions: The developed low-cost augmented-reality system proved to be accurate and feasible in interstitial brachytherapy. The system meets clinical demands and enables intuitive real-time intraoperative orientation and monitoring of needle implantation.« less

Projector-based augmented reality for intuitive intraoperative guidance in image-guided 3D interstitial brachytherapy.

PubMed

Krempien, Robert; Hoppe, Harald; Kahrs, Lüder; Daeuber, Sascha; Schorr, Oliver; Eggers, Georg; Bischof, Marc; Munter, Marc W; Debus, Juergen; Harms, Wolfgang

2008-03-01

The aim of this study is to implement augmented reality in real-time image-guided interstitial brachytherapy to allow an intuitive real-time intraoperative orientation. The developed system consists of a common video projector, two high-resolution charge coupled device cameras, and an off-the-shelf notebook. The projector was used as a scanning device by projecting coded-light patterns to register the patient and superimpose the operating field with planning data and additional information in arbitrary colors. Subsequent movements of the nonfixed patient were detected by means of stereoscopically tracking passive markers attached to the patient. In a first clinical study, we evaluated the whole process chain from image acquisition to data projection and determined overall accuracy with 10 patients undergoing implantation. The described method enabled the surgeon to visualize planning data on top of any preoperatively segmented and triangulated surface (skin) with direct line of sight during the operation. Furthermore, the tracking system allowed dynamic adjustment of the data to the patient's current position and therefore eliminated the need for rigid fixation. Because of soft-part displacement, we obtained an average deviation of 1.1 mm by moving the patient, whereas changing the projector's position resulted in an average deviation of 0.9 mm. Mean deviation of all needles of an implant was 1.4 mm (range, 0.3-2.7 mm). The developed low-cost augmented-reality system proved to be accurate and feasible in interstitial brachytherapy. The system meets clinical demands and enables intuitive real-time intraoperative orientation and monitoring of needle implantation.

[Integrated project of personalisation school curricula and training].

PubMed

Zanon, A; Tomassoni, R; Santangelo, N; Gargano, M; Treglia, E; Granai, M G; Incagnoli, A

2017-01-01

To strengthen the motivation to study, promote awareness of their attitudes and actions of orientation / re-orientation to the profession, making the learning experience more stimulating and training in order to staunch the sharp drop-out affecting the school. The project, coordinated by psychologists, involved the administration of AMOS Test as a tool to detect the variables of interest (self-image, ambitions and motivations, concerns for the future, soft skills etc.) in a sample of students belonging the CFP of Lazio. The sample consisted of 632 students (aged between 14 and 20 years and made up 70.6% of females). The sample is divided between the Agency's structures Formation of the Province of Frosinone: Anagni (7,3%); Cassino (24,7%); Ferentino (10,9%); Frosinone (31,8 %); Pontecorvo (4,1%) and Sora (21,2%) that offer various training courses: a wellness area (81%), electronic / mechanical area (12%), administrative one (7%). Most of the students have poor self-esteem and con dence in their own resources. They have a poor perception of their skills both profes- sionally and personally, have trouble thinking of an ambitious future with a 'negative self-image'. Few have plans for the future and are determined to achieve them and bring them forward, demonstrating uncertainty about future careers. The survey findings emerges the need of the students to have a support not only educational but also cognitive and emotional. Possible proposals for action are: the implementation of techniques such as cooperative learning, action learning, problem solving, the 'activation of a door psychological listening and the like.

Green utilities for research and eco-tourist communities, Rio Bravo, Belize, Central America

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jackson, O.

1997-12-31

Programme for Belize (PFB), a non-governmental organization which owns and manages the Rio Bravo Conservation and Management Area (RBCMA), a 229,000 acre section of subtropical rainforest in northwestern Belize, is developing a series of research and eco-tourism developments as sustainable development projects. Guided by a comprehensive Sustainable Infrastructure Plan completed by Caribbean Infra-Tech, Inc. (CIT) in 1995, PFB adopted an organizational goal of implementing 100% green renewable energy-based utilities for their two major development sites: La Milpa and Hill Bank stations. To date, PFB has constructed or installed over 20 kW of standalone PV power, sustainable water supply systems, recyclingmore » waste treatment systems, and a model sustainable Dormitory and Bath House facility in the RBCMA. In addition, a Resource Conservation and Management Program (RCMP), which is to guide ongoing visitor orientation, staff training, and sustainable systems operations and maintenance, is now being prepared for immediate implementation. In this paper, the design and technical performance of the solar (PV) electric power plants, PV water pumping, solar water heating and other green utility systems will be assessed.« less

Problem Oriented Literacy Materials Preparation: A Case Study

ERIC Educational Resources Information Center

Tripathi, Virendra

1975-01-01

One of the recent innovations of significance in developing nations is the concept of linking literacy education to problems related to socio-economic development. The article describes the Problem Oriented Materials Preparation Project of Literacy House, Lucknow, India. (Author/BP)

OOPs!

ERIC Educational Resources Information Center

Margush, Tim

2001-01-01

Discussion of Object Oriented Programming (OOP) focuses on criticism of an earlier article that addressed problems of applying specific functionality to controls across several forms in a Visual Basic project. Examines the Object Oriented techniques, inheritance and composition, commonly employed to extend the functionality of an object.…

Industrial Orientation.

ERIC Educational Resources Information Center

Rasor, Leslie; Brooks, Valerie

These eight modules for an industrial orientation class were developed by a project to design an interdisciplinary program of basic skills training for disadvantaged students in a Construction Technology Program (see Note). The Drafting module overviews drafting career opportunities, job markets, salaries, educational requirements, and basic…

Using a sociotechnical framework to understand adaptations in health IT implementation

PubMed Central

Novak, Laurie Lovett; Holden, Richard J; Anders, Shilo H; Hong, Jennifer Y; Karsh, Ben-Tzion

2013-01-01

Purpose When barcode medication administration (BCMA) is implemented nurses are required to integrate not only a new set of procedures or artifacts into everyday work, but also an orientation to medication safety itself that is sometimes at odds with their own. This paper describes how the nurses’ orientation (the Practice Frame) can collide with the orientation that is represented by the technology and its implementation (the System Frame), resulting in adaptations at the individual and organization levels. Methods The paper draws on two qualitative research studies that examined the implementation of BCMA in inpatient settings using observation and ethnographic fieldwork, content analysis of email communications, and interviews with healthcare professionals. Results Two frames of reference are described: the System Frame and the Practice Frame. We found collisions of these frames that prompted adaptations at the individual and organization levels. The System Frame was less integrated and flexible than the Practice Frame, less able to account for all of the dimensions of everyday patient care to which medication administration is tied. Conclusion Collisions in frames during implementation of new technology result in adaptations at the individual and organization level that can have a variety of effects. We found adaptations to be a means of evolving both the work routines and the technology. Understanding the frames of clinical workers when new technology is being designed and implemented can inform changes to technology or organizational structure and policy that can preclude unproductive or unsafe adaptations. PMID:23562140

The impact of risk management practice upon the implementation of recovery-oriented care in community mental health services: a qualitative investigation.

PubMed

Holley, Jessica; Chambers, Mary; Gillard, Steven

2016-08-01

Recovery-oriented care has become guiding principle for mental health policies and practice in the UK and elsewhere. However, a pre-existing culture of risk management practice may impact upon the provision of recovery-oriented mental health services. To explore how risk management practice impacts upon the implementation of recovery-oriented care within community mental health services. Semi-structured interviews using vignettes were conducted with eight mental health worker and service user dyads. Grounded theory techniques were used to develop explanatory themes. Four themes arose: (1) recovery and positive risk taking; (2) competing frameworks of practice; (3) a hybrid of risk and recovery; (4) real-life recovery in the context of risk. In abstract responses to the vignettes, mental health workers described how they would use a positive-risk taking approach in support of recovery. In practice, this was restricted by a risk-averse culture embedded within services. Mental health workers set conditions with which service users complied to gain some responsibility for recovery. A lack of strategic guidance at policy level and lack of support and guidance at practice level may result in resistance to implementing ROC in the context of RMP. Recommendations are made for policy, training and future research.

Project Tradition and Technology (Project TNT): The Hualapai Bilingual Academic Excellence Program.

ERIC Educational Resources Information Center

Reed, Michael D.; And Others

Project Tradition and Technology (TNT) at Peach Springs Elementary School (Peach Springs, Arizona) is 1 of 12 programs recognized nationally as an outstanding model of bilingual education by the U.S. Department of Education. Project TNT is a process-oriented curriculum development model that identifies the community's needs and expectations for…

Theo Jansen Project in Engineering Design Course and a Design Example

ERIC Educational Resources Information Center

Liu, Yucheng; Artigue, Aaron; Sommers, Jeremy; Chambers, Terence

2011-01-01

Objectives of a project-oriented mechanical engineering course, Engineering Design, were achieved through a design project, where students designed, built and demonstrated an extreme version of a basic Theo Jansen device. Through this project, junior students in the University of Louisiana fully developed the capability of applying mathematic and…

The SUSTAIN Project: A European Study on Improving Integrated Care for Older People Living at Home

PubMed Central

Stoop, Annerieke; Billings, Jenny; Leichsenring, Kai; Ruppe, Georg; Tram, Nhu; Barbaglia, María Gabriela; Ambugo, Eliva A.; Zonneveld, Nick; Paat-Ahi, Gerli; Hoffmann, Henrik; Khan, Usman; Stein, Viktoria; Wistow, Gerald; Lette, Manon; Jansen, Aaltje P.D.; Nijpels, Giel; Baan, Caroline A.

2018-01-01

Introduction: Integrated care programmes are increasingly being put in place to provide care to older people who live at home. Knowledge of how to further develop integrated care and how to transfer successful initiatives to other contexts is still limited. Therefore, a cross-European research project, called Sustainable Tailored Integrated Care for Older People in Europe (SUSTAIN), has been initiated with a twofold objective: 1. to collaborate with local stakeholders to support and monitor improvements to established integrated care initiatives for older people with multiple health and social care needs. Improvements focus on person-centredness, prevention orientation, safety and efficiency; 2. to make these improvements applicable and adaptable to other health and social care systems, and regions in Europe. This paper presents the overall structure and approach of the SUSTAIN project. Methods: SUSTAIN uses a multiple embedded case study design. In three phases, SUSTAIN partners: (i) conduct interviews and workshops with stakeholders from fourteen established integrated care initiatives to understand where they would prefer improvements to existing ways of working; (ii) collaborate with local stakeholders to support the design and implementation of improvement plans, evaluate implementation progress and outcomes per initiative, and carry out overarching analyses to compare the different initiatives, and; (iii) translate knowledge and experience to an online roadmap. Discussion: SUSTAIN aims to generate evidence on how to improve integrated care, and apply and transfer the knowledge gained to other health and social care systems, and regions. Lessons learned will be brought together in practical tools to inform and support policy-makers and decision-makers, as well as other stakeholders involved in integrated care, to manage and improve care for older people living at home. PMID:29632456

The ground support equipment for the LAUE project

NASA Astrophysics Data System (ADS)

Caroli, E.; Auricchio, N.; Basili, A.; Carassiti, V.; Cassese, F.; Del Sordo, S.; Frontera, F.; Pecora, M.; Recanatesi, L.; Schiavone, F.; Silvestri, S.; Squerzanti, S.; Stephen, J. B.; Virgilli, E.

2013-09-01

The development of wide band Laue lens imaging technology is challenging, but has important potential applications in hard X- and γ-ray space instrumentation for the coming decades. The Italian Space Agency has funded a project dedicated to the development of a reliable technology to assemble a wide band Laue lens for use in space. The ground support equipment (GSE) for this project was fundamental to its eventual success... The GSE was implemented in a hard X-ray beam line built at the University of Ferrara and had the main purpose of controlling the assembly of crystals onto the Laue lens petal and to verify its final performance. The GSE incorporates the management and control of all the movements of the beam line mechanical subsystems and of the precision positioner (based on a Hexapod tool) of crystals on the petal, as well as the acquisition, storing and analysis of data obtained from the focal plane detectors (an HPGe spectrometer and an X-ray flat panel imager). The GSE is based on two PC's connected through a local network: one, placed inside the beam line, to which all the movement subsystems and the detector I/O interface and on which all the management and acquisition S/W runs, the other in the control room allows the remote control and implements the offline analysis S/W of the data obtained from the detectors. Herein we report on the GSE structure with its interface with the beam line mechanical system, with the fine crystal positioner and with the focal plane detector. Furthermore we describe the SW developed for the handling of the mechanical movement subsystems and for the analysis of the detector data with the procedure adopted for the correct orientation of the crystals before their bonding on the lens petal support.

The SAMCO Web-platform for resilience assessment in mountainous valleys impacted by landslide risks.

NASA Astrophysics Data System (ADS)

Grandjean, Gilles; Thomas, Loic; Bernardie, Severine

2016-04-01

The ANR-SAMCO project aims to develop a proactive resilience framework enhancing the overall resilience of societies on the impacts of mountain risks. The project aims to elaborate methodological tools to characterize and measure ecosystem and societal resilience from an operative perspective on three mountain representative case studies. To achieve this objective, the methodology is split in several points: (1) the definition of the potential impacts of global environmental changes (climate system, ecosystem e.g. land use, socio-economic system) on landslide hazards, (2) the analysis of these consequences in terms of vulnerability (e.g. changes in the location and characteristics of the impacted areas and level of their perturbation) and (3) the implementation of a methodology for quantitatively investigating and mapping indicators of mountain slope vulnerability exposed to several hazard types, and the development of a GIS-based demonstration platform available on the web. The strength and originality of the SAMCO project lies in the combination of different techniques, methodologies and models (multi-hazard assessment, risk evolution in time, vulnerability functional analysis, and governance strategies) that are implemented in a user-oriented web-platform, currently in development. We present the first results of this development task, architecture and functions of the web-tools, the case studies database showing the multi-hazard maps and the stakes at risks. Risk assessment over several area of interest in Alpine or Pyrenean valleys are still in progress, but the first analyses are presented for current and future periods for which climate change and land-use (economical, geographical and social aspects) scenarios are taken into account. This tool, dedicated to stakeholders, should be finally used to evaluate resilience of mountainous regions since multiple scenarios can be tested and compared.

[Application of marketing strategies for the management of public hospitals from the viewpoint of the staff members].

PubMed

Riveros S, Jorge; Berné M, Carmen

2006-03-01

The implementation of the marketing strategies in public hospitals provides management advantages and improves the relationship between customers and staff. To analyze the application of marketing strategies in a public hospital, from the perspective of the staff. A structured survey that asked about perceptions in 50 items about communication between personnel and customers/users, customer satisfaction, participation in the development of new policies and incentives for efficiency was applied to a stratified sample of the staff. Factorial and regression analyses were performed to define the impact of marketing strategies on the degree of preoccupation and orientation of the organization towards the satisfaction of customer needs. The survey was applied to 74 males and 122 females. The survey showed that the orientation of the hospital towards the satisfaction of its beneficiaries basically depends on the generation of an organizational culture oriented towards them and the implementation of adequate policies in staff management and quality of service. These basic aspects can be accompanied with practices associated to the new marketing approaches such as a market orientation, customer orientation and relational marketing. All these factors presented positive and significant relations. New marketing strategies should be applied, to achieve an efficient and customer oriented hospital management.