The efficacy of the 'mind map' study technique.

PubMed

Farrand, Paul; Hussain, Fearzana; Hennessy, Enid

2002-05-01

To examine the effectiveness of using the 'mind map' study technique to improve factual recall from written information. To obtain baseline data, subjects completed a short test based on a 600-word passage of text prior to being randomly allocated to form two groups: 'self-selected study technique' and 'mind map'. After a 30-minute interval the self-selected study technique group were exposed to the same passage of text previously seen and told to apply existing study techniques. Subjects in the mind map group were trained in the mind map technique and told to apply it to the passage of text. Recall was measured after an interfering task and a week later. Measures of motivation were taken. Barts and the London School of Medicine and Dentistry, University of London. 50 second- and third-year medical students. Recall of factual material improved for both the mind map and self-selected study technique groups at immediate test compared with baseline. However this improvement was only robust after a week for those in the mind map group. At 1 week, the factual knowledge in the mind map group was greater by 10% (adjusting for baseline) (95% CI -1% to 22%). However motivation for the technique used was lower in the mind map group; if motivation could have been made equal in the groups, the improvement with mind mapping would have been 15% (95% CI 3% to 27%). Mind maps provide an effective study technique when applied to written material. However before mind maps are generally adopted as a study technique, consideration has to be given towards ways of improving motivation amongst users.

Applying usability testing techniques to improve a health promotion website.

PubMed

Hinchliffe, Anetta; Mummery, W Kerry

2008-04-01

Use of the Internet for health promotion is increasing; however, the lack of published research regarding website usability suggests that health promotion websites are being developed without consultation with their users or formal evaluation. This study conducted usability testing of an existing health promotion website to inform modifications and to identify common usability themes that should be addressed by organisations developing or maintaining a health promotion website. A combination of qualitative and quantitative techniques were implemented during the usability testing sessions to gather data from users while completing tasks on the website. Techniques included performance measures (time taken), direct observation (participant observation) and subjective user preferences (questionnaire and interview). Improvements to the website were measured in terms of reduced problems reported, reduced time taken to complete tasks and increased subjective reports. Seven usability themes emerged from the data: design, feedback, format, instructions, navigation, terminology and learnability. This study demonstrates the application of usability testing to the design and modification of a health promotion website and illustrates the areas or themes that can be used as a framework for testing and modification.

Improved optical axis determination accuracy for fiber-based polarization-sensitive optical coherence tomography

NASA Astrophysics Data System (ADS)

Lu, Zenghai; Matcher, Stephen J.

2013-03-01

We report on a new calibration technique that permits the accurate extraction of sample Jones matrix and hence fast-axis orientation by using fiber-based polarization-sensitive optical coherence tomography (PS-OCT) that is completely based on non polarization maintaining fiber such as SMF-28. In this technique, two quarter waveplates are used to completely specify the parameters of the system fibers in the sample arm so that the Jones matrix of the sample can be determined directly. The device was validated on measurements of a quarter waveplate and an equine tendon sample by a single-mode fiber-based swept-source PS-OCT system.

Temperature control of the Mariner class spacecraft - A seven mission summary.

NASA Technical Reports Server (NTRS)

Dumas, L. N.

1973-01-01

Mariner spacecraft have completed five missions of scientific investigation of the planets. Two additional missions are planned. A description of the thermal design of these seven spacecraft is given herein. The factors which have influenced the thermal design include the mission requirements and constraints, the flight environment, certain programmatic considerations and the experience gained as each mission is completed. These factors are reviewed and the impact of each on thermal design and developmental techniques is assessed. It is concluded that the flight success of these spacecraft indicates that adequate temperature control has been obtained, but that improvements in design data, hardware performance and analytical techniques are needed.

Increased oil production and reserves from improved completion techniques in the Bluebell field, Uinta Basin. Quarterly technical report, October 1, 1996--December 31, 1996

DOE Office of Scientific and Technical Information (OSTI.GOV)

Morgan, C.D.

1997-02-01

The objective of this project is to increase oil production and reserves in the Uinta Basin by demonstrating improved completion techniques. Low productivity of Uinta Basin wells is caused by gross production intervals of several thousand feet that contain perforated thief zones, water-bearing zones, and unperforated oil-bearing intervals. Geologic and engineering characterization and computer simulation of the Green River and Wasatch formations in the Bluebell field will determine reservoir heterogeneities related to fractures and depositional trends. This will be followed by drilling and recompletion of several wells to demonstrate improved completion techniques based on the reservoir characterization. Transfer of themore » project results will be an ongoing component of the project. The recompletion of the Michelle Ute 7-1 well commenced and is the first step in the three-well demonstration. As part of the recompletion, the gross productive interval was logged, additional beds were perforated, and the entire interval was stimulated with a three-stage acid treatment. The operator attempted to stimulate the well at high pressure (about 10,000 pounds per square inch (psi) [68,950 kPa]) at three separate packer locations. But at each location the pressure would not hold. As a result, all three stages were pumped at a lower pressure (6500 psi maximum [44,820 kPa]) from one packer location. As of December 31, 1996, the operator was tripping in the hole with the production packer and tubing to begin swab testing the well.« less

CAD/CAM milled removable complete dentures: an in vitro evaluation of trueness.

PubMed

Srinivasan, Murali; Cantin, Yoann; Mehl, Albert; Gjengedal, Harald; Müller, Frauke; Schimmel, Martin

2017-07-01

This study aimed to compare the trueness of one type of CAD/CAM milled complete removable dental prostheses (CRDPs) with injection-molding and conventionally manufactured CRDPs. Thirty-three CRDPs were fabricated by three different manufacturing techniques (group CAD/CAM (AvaDent™): n = 11; group injection molding (Ivocap™): n = 11; group flask-pack-press: n = 11) using a single master reference model and incubated in artificial saliva for 21 days. The trueness of the entire intaglio surface along with five specific regions of interest (vestibular-flange, palate, tuberosities, alveolar crest, and post-dam areas) was compared. Non-parametric tests were used with a level of significance set at p < 0.05. At baseline, there was no difference in the trueness of the total intaglio surfaces between the groups. After incubation, only the conventional CRDPs showed a significant improvement in trueness of the entire intaglio surface (p = 0.0044), but improved trueness was confirmed for all three techniques in most individual regions of interest. The 80-20 % /2 median quantile of the CAD/CAM group demonstrated the highest variability of individual readings, probably due to the size of the milling instrument. However, for all three techniques, 80 % of all deviations of the complete intaglio surface after incubation in saliva were below 0.1 mm. In this in vitro study, the trueness of the intaglio surface of all three investigated techniques seems to remain within a clinically acceptable range. Additional research is warranted on material-related aspects, cost-effectiveness, clinical performance, patient-centered outcomes, as well as other CAD/CAM techniques for CRDP fabrication. The intaglio surface trueness is an essential aspect in the clinical performance of CRDPs.

Innovative tools and techniques in identifying highway safety improvement projects : project summary.

DOT National Transportation Integrated Search

2017-01-01

Researchers completed the following activities: - Reviewed the literature, state HSIP processes and practices, and HSIP tools used by various agencies. - Evaluated the applicability of safety assessment methods and tools used by other states and loca...

The Efficacy of Instructor-Guided Supplemental Instruction as a Strategy for Helping Reading-Deficient College Students Improve Testing and Assessment Outcomes

ERIC Educational Resources Information Center

Bartley-Lukula, Audrey

2013-01-01

This research project examined whether the use of Instructor-guided Supplemental Instruction as a classroom scaffolding technique, might help improve testing and assessment reading outcomes for reading-deficient college students. The study was completed at Tennessee State University in Nashville, Tennessee over the 16-week Fall, 2012 semester…

Use of the Job Model Concept to Guide Job Description Procedures for Army Officers.

ERIC Educational Resources Information Center

Whitmore, Paul G.

The objective of Work Unit SKYGUARD has been to facilitate the development of an improved Air Defense Officers Advanced Course (C-22) by the U.S. Army Air Defense School. Focus is on techniques for improving the completeness and relevance of the instructional objectives with respect to future job requirements. The job description procedures…

The recalibration of the IUE scientific instrument

NASA Technical Reports Server (NTRS)

Imhoff, Catherine L.; Oliversen, Nancy A.; Nichols-Bohlin, Joy; Casatella, Angelo; Lloyd, Christopher

1988-01-01

The IUE instrument was recalibrated because of long time-scale changes in the scientific instrument, a better understanding of the performance of the instrument, improved sets of calibration data, and improved analysis techniques. Calibrations completed or planned include intensity transfer functions (ITF), low-dispersion absolute calibrations, high-dispersion ripple corrections and absolute calibrations, improved geometric mapping of the ITFs to spectral images, studies to improve the signal-to-noise, enhanced absolute calibrations employing corrections for time, temperature, and aperture dependence, and photometric and geometric calibrations for the FES.

A comprehensive program to develop correlations for physical properties of kraft black liquor. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fricke, A.L.; Zaman, A.A.; Stoy, M.O.

A wide variety of experimental techniques have been used in this work, and many of these have been developed completely or improved significantly in the course of the research done during this program. Therefore, it is appropriate to describe these techniques in detail as a reference for future workers so that the techniques can be used in future work with little additional effort or so that the results reported from this program can be compared better with future results from other work. In many cases, the techniques described are for specific analytical instruments. It is recognized that these may bemore » superseded by future developments and improvements in instrumentation if a complete description of techniques used successfully in the past on other instrumentation is available. The total pulping and liquor preparation research work performed included chip and white liquor preparation, digestion, pulp washing, liquor and wash recovery, liquor sampling, weak liquor concentration in two steps to about 45--50% solids with an intermediate soap skimming at about 140F and 27--30% solids, determination of pulp yield and Kappa number, determination of total liquor solids, and a check on the total material balance for pulping. All other research was performed either on a sample of the weak black liquor (the combined black liquor and washes from the digester) or on the skimmed liquor that had been concentrated.« less

What Is Instrumented Learning? Part 1

ERIC Educational Resources Information Center

Blake, Robert; Mouton, Jane

1972-01-01

Although article is directed specifically towards improving sales techniques through self evaluation, it discusses various autoinstructional aids that could be applied to other fields. These include self-ranking against an objectives" grid, forced and multiple choice quizzes and the sentence-completion approach. (PD)

The role of completion imaging following carotid artery endarterectomy.

PubMed

Ricco, Jean-Baptiste; Schneider, Fabrice; Illuminati, Giulio; Samson, Russell H

2013-05-01

A variety of completion imaging methods can be used during carotid endarterectomy to recognize technical errors or intrinsic abnormalities such as mural thrombus or platelet aggregation, but none of these methods has achieved wide acceptance, and their ability to improve the outcome of the operation remains a matter of controversy. It is unclear if completion imaging is routinely necessary and which abnormalities require re-exploration. Proponents of routine completion imaging argue that identification of these abnormalities will allow their immediate correction and avoid a perioperative stroke. However, much of the evidence in favor of this argument is incidental, and many experienced vascular surgeons who perform carotid endarterectomy do not use any completion imaging technique and report equally good outcomes using a careful surgical protocol. Furthermore, certain postoperative strokes, including intracerebral hemorrhage and hyperperfusion syndrome, are unrelated to the surgical technique and cannot be prevented by completion imaging. This controversial subject is now open to discussion, and our debaters have been given the task to clarify the evidence to justify their preferred option for completion imaging during carotid endarterectomy. Copyright © 2013 Society for Vascular Surgery. Published by Mosby, Inc. All rights reserved.

The Taylor saddle effacement: a new technique for correction of saddle nose deformity.

PubMed

Taylor, S Mark; Rigby, Matthew H

2008-02-01

To describe a novel technique, the Taylor saddle effacement (TSE), for correction of saddle nose deformity using autologous grafts from the lower lateral cartilages. A prospective evaluation of six patients, all of whom had the TSE performed. Photographs were taken in combination with completion of a rhinoplasty outcomes questionnaire preoperatively and at 6 months. The questionnaire included a visual analogue scale (VAS) of nasal breathing and a rhinoplasty outcomes evaluation (ROE) of nasal function and esthetics. All six patients had improvement in both their global nasal airflow on the VAS and on their ROE that was statistically significant. The mean preoperative VAS score was 5.8 compared with our postoperative mean of 8.5 of a possible 10. Mean ROE scores improved from 34.7 to 85.5. At 6 months, all patients felt that their nasal appearance had improved. The TSE is a simple and reliable technique for correction of saddle nose deformity. This prospective study has demonstrated improvement in both nasal function and esthetics when it is employed.

[Comparison of 2 lacrimal punctal occlusion methods].

PubMed

Shalaby, O; Rivas, L; Rivas, A I; Oroza, M A; Murube, J

2001-09-01

To study and compare two methods for canalicular occlusion: Cautery and Punctal Patch. The study included fourty patients divided in two groups of 20 patients. The end point was 4 occluded puncti. The first group underwent deep cauterization resulting in occlusion of the full vertical aspect of the canaliculus. The second group underwent punctal patch technique for canalicular occlusion. Differential parameters were the following: time of intervention, ease of use, risks and precision. In the post operatory, discomfort, subjective and objective improvement in ocular surface as well as long term result of each technique was analysed. Time of intervention was longer for punctal patch compared to cautery. Both methods exhibited similar ease of use and improvement in ocular surface. Precision was high in punctal patch technique showing complete and final occlusion and no punctum needed reopening, while cautery technique presented 20% rate of reopening intervention. Postoperatory discomfort and irritation were remarkably evident with punctal technique, while minimal in cautery technique. Survival analysis after one year follow up, showed a higher rate of advantages for punctal patch technique over cautery technique.

Further Psychodrama with Delinquent Adolescents.

ERIC Educational Resources Information Center

Carpenter, Patricia; Sandberg, Salek

1985-01-01

Adjusted delinquent adolescents (N=7) participated in a 12-session psychodramatic group therapy program which integrated behavioral-cognitive techniques. Participants and control subjects (N=10) completed pre- and post-tests measuring acting-out behavior and ego strength. Results showed that significant improvement occurred in the experimental…

Improvement of Base and Soil Construction Quality by Using Intelligent Compaction Technology : Final Report.

DOT National Transportation Integrated Search

2017-08-01

Intelligent Compaction (IC) technique is a fast-developing technology for base and soil compaction quality control. Proof-rolling subgrades and bases using IC rollers upon completion of compaction can identify the less stiff spots and significantly i...

Whole lung lavage with intermittent double lung ventilation. A modified technique for managing pulmonary alveolar proteinosis.

PubMed

Ahmed, Raees; Iqbal, Mobeen; Kashef, Sayed H; Almomatten, Mohammed I

2005-01-01

Whole lung lavage is still the most effective treatment for pulmonary alveolar proteinosis. We report a 21-year-old male diagnosed with pulmonary alveolar proteinosis by open lung biopsy and who underwent whole lung lavage with a modified technique. He showed significant improvement in clinical and functional parameters. The technique of intermittent double lung ventilation during lavage procedure keeps the oxygen saturation in acceptable limits in patients at risk for severe hypoxemia and allows the procedure to be completed in a single setting.

TOPICAL REVIEW: Human soft tissue analysis using x-ray or gamma-ray techniques

NASA Astrophysics Data System (ADS)

Theodorakou, C.; Farquharson, M. J.

2008-06-01

This topical review is intended to describe the x-ray techniques used for human soft tissue analysis. X-ray techniques have been applied to human soft tissue characterization and interesting results have been presented over the last few decades. The motivation behind such studies is to provide improved patient outcome by using the data obtained to better understand a disease process and improve diagnosis. An overview of theoretical background as well as a complete set of references is presented. For each study, a brief summary of the methodology and results is given. The x-ray techniques include x-ray diffraction, x-ray fluorescence, Compton scattering, Compton to coherent scattering ratio and attenuation measurements. The soft tissues that have been classified using x-rays or gamma rays include brain, breast, colon, fat, kidney, liver, lung, muscle, prostate, skin, thyroid and uterus.

Evaluation of small area crop estimation techniques using LANDSAT- and ground-derived data. [South Dakota

NASA Technical Reports Server (NTRS)

Amis, M. L.; Martin, M. V.; Mcguire, W. G.; Shen, S. S. (Principal Investigator)

1982-01-01

Studies completed in fiscal year 1981 in support of the clustering/classification and preprocessing activities of the Domestic Crops and Land Cover project. The theme throughout the study was the improvement of subanalysis district (usually county level) crop hectarage estimates, as reflected in the following three objectives: (1) to evaluate the current U.S. Department of Agriculture Statistical Reporting Service regression approach to crop area estimation as applied to the problem of obtaining subanalysis district estimates; (2) to develop and test alternative approaches to subanalysis district estimation; and (3) to develop and test preprocessing techniques for use in improving subanalysis district estimates.

State-of-the-art molecular imaging in esophageal cancer management: implications for diagnosis, prognosis, and treatment

PubMed Central

Lin, Jolinta; Kligerman, Seth; Goel, Rakhi; Sajedi, Payam; Suntharalingam, Mohan

2015-01-01

Molecular imaging techniques are increasingly being used in addition to standard imaging methods such as endoscopic ultrasound (EUS) and computed tomography (CT) for many cancers including those of the esophagus. In this review, we will discuss the utility of the most widely used molecular imaging technique, 18F-fluorodeoxyglucose (18F-FDG) positron emission tomography (PET). 18F-FDG PET has a variety of potential applications ranging from improving staging accuracy at the time of initial diagnosis to assisting in radiation target volume delineation. Furthermore, 18F-FDG PET can be used to evaluate treatment response after completion of neoadjuvant therapy or potentially during neoadjuvant therapy. Finally, we will also discuss other novel molecular imaging techniques that have potential to further improve cancer care. PMID:25642333

Complete denture services: clinical technique, lab costs, manpower, and reimbursement. One-year review.

PubMed

Ewoldsen, Nels

2011-01-01

Complete denture services at comprehensive care public health clinics are not common in part because of clinician concerns regarding outcomes. Educational debt forgiveness has attracted recent dental graduates to public health dentistry; however, not all recent graduates receive denture education experiences necessary to attain proficiency. While fundamental patient assessment and denture construction are taught, psychological assessment and communication with denture patients requires experience. A thorough understanding of occlusion, phonetics, esthetics and laboratory steps is also necessary. Expecting recent dental graduates to become proficient providing complete dentures at minimal reimbursement levels, with no mentorship or on-site laboratory support, is unrealistic. Public health dental clinics operate at full capacity performing emergency, preventive and restorative procedures. Complete dentures come with a laboratory fee approximately one-half the total reimbursement, meaning a remake drops clinic revenue to zero while doubling expenses. It is understandable that full schedules, marginal reimbursement, unpredictability and the risk of an occasional failure block clinician interest in providing denture services. This one-year report of services describes a three-appointment complete denture technique offering improved patient and laboratory communication, reduced chair time and controlled cost, resulting in high-quality complete dentures.

Systematic Viewing in Radiology: Seeing More, Missing Less?

ERIC Educational Resources Information Center

Kok, Ellen M.; Jarodzka, Halszka; de Bruin, Anique B. H.; BinAmir, Hussain A. N.; Robben, Simon G. F.; van Merriënboer, Jeroen J. G.

2016-01-01

To prevent radiologists from overlooking lesions, radiology textbooks recommend "systematic viewing," a technique whereby anatomical areas are inspected in a fixed order. This would ensure complete inspection (full coverage) of the image and, in turn, improve diagnostic performance. To test this assumption, two experiments were…

Wrestling with Philosophy: Improving Scholarship in Higher Education

ERIC Educational Resources Information Center

Kezar, Adrianna

2004-01-01

Method is usually viewed as completely separate from philosophy or theory, focusing instead on techniques and procedures of interviewing, focus groups, observation, or statistical analysis. Several texts on methodology published recently have added significant sections on philosophy, such as Creswell's (1998) Qualitative inquiry and research…

The human genome contracts again.

PubMed

Pavlichin, Dmitri S; Weissman, Tsachy; Yona, Golan

2013-09-01

The number of human genomes that have been sequenced completely for different individuals has increased rapidly in recent years. Storing and transferring complete genomes between computers for the purpose of applying various applications and analysis tools will soon become a major hurdle, hindering the analysis phase. Therefore, there is a growing need to compress these data efficiently. Here, we describe a technique to compress human genomes based on entropy coding, using a reference genome and known Single Nucleotide Polymorphisms (SNPs). Furthermore, we explore several intrinsic features of genomes and information in other genomic databases to further improve the compression attained. Using these methods, we compress James Watson's genome to 2.5 megabytes (MB), improving on recent work by 37%. Similar compression is obtained for most genomes available from the 1000 Genomes Project. Our biologically inspired techniques promise even greater gains for genomes of lower organisms and for human genomes as more genomic data become available. Code is available at sourceforge.net/projects/genomezip/

Improvement of Biocatalysts for Industrial and Environmental Purposes by Saturation Mutagenesis

PubMed Central

Valetti, Francesca; Gilardi, Gianfranco

2013-01-01

Laboratory evolution techniques are becoming increasingly widespread among protein engineers for the development of novel and designed biocatalysts. The palette of different approaches ranges from complete randomized strategies to rational and structure-guided mutagenesis, with a wide variety of costs, impacts, drawbacks and relevance to biotechnology. A technique that convincingly compromises the extremes of fully randomized vs. rational mutagenesis, with a high benefit/cost ratio, is saturation mutagenesis. Here we will present and discuss this approach in its many facets, also tackling the issue of randomization, statistical evaluation of library completeness and throughput efficiency of screening methods. Successful recent applications covering different classes of enzymes will be presented referring to the literature and to research lines pursued in our group. The focus is put on saturation mutagenesis as a tool for designing novel biocatalysts specifically relevant to production of fine chemicals for improving bulk enzymes for industry and engineering technical enzymes involved in treatment of waste, detoxification and production of clean energy from renewable sources. PMID:24970191

Sensory subtraction in robot-assisted surgery: fingertip skin deformation feedback to ensure safety and improve transparency in bimanual haptic interaction.

PubMed

Meli, Leonardo; Pacchierotti, Claudio; Prattichizzo, Domenico

2014-04-01

This study presents a novel approach to force feedback in robot-assisted surgery. It consists of substituting haptic stimuli, composed of a kinesthetic component and a skin deformation, with cutaneous stimuli only. The force generated can then be thought as a subtraction between the complete haptic interaction, cutaneous, and kinesthetic, and the kinesthetic part of it. For this reason, we refer to this approach as sensory subtraction. Sensory subtraction aims at outperforming other nonkinesthetic feedback techniques in teleoperation (e.g., sensory substitution) while guaranteeing the stability and safety of the system. We tested the proposed approach in a challenging 7-DoF bimanual teleoperation task, similar to the Pegboard experiment of the da Vinci Skills Simulator. Sensory subtraction showed improved performance in terms of completion time, force exerted, and total displacement of the rings with respect to two popular sensory substitution techniques. Moreover, it guaranteed a stable interaction in the presence of a communication delay in the haptic loop.

Modified loop technique in three dogs with mitral regurgitation.

PubMed

Aoki, Takuma; Fujii, Yoko; Sunahara, Hiroshi; Takano, Hiroshi; Wakao, Yoshito

2013-01-31

Mitral valvuloplasty (MVP) is used in dogs with refractory mitral regurgitation (MR); however, it is difficult to tie the artificial chord, i.e., the expanded polytetrafluoroethylene suture, at the planned height of the mitral valve, because of the slippery nature of the knot. The loop technique has resolved these difficulties in humans. Premanufactured loops (length, 8.0-15.0 mm with 1.0-mm increments) were used in the new modified loop technique. In the current study, cardiac murmurs disappeared, and the MR markedly improved or completely disappeared approximately 3 months after surgery in 3 dogs. Therefore, this new technique might be effective in dogs.

The Computational Complexity of the Kakuro Puzzle, Revisited

NASA Astrophysics Data System (ADS)

Ruepp, Oliver; Holzer, Markus

We present a new proof of NP-completeness for the problem of solving instances of the Japanese pencil puzzle Kakuro (also known as Cross-Sum). While the NP-completeness of Kakuro puzzles has been shown before [T. Seta. The complexity of CROSS SUM. IPSJ SIG Notes, AL-84:51-58, 2002], there are still two interesting aspects to our proof: we show NP-completeness for a new variant of Kakuro that has not been investigated before and thus improves the aforementioned result. Moreover some parts of the proof have been generated automatically, using an interesting technique involving SAT solvers.

Use of a "small-bubble technique" to increase the success of Anwar's "big-bubble technique" for deep lamellar keratoplasty with complete baring of Descemet's membrane.

PubMed

Parthasarathy, Anand; Por, Yong Ming; Tan, Donald T H

2007-10-01

To describe a quick and simple "small-bubble" technique to immediately determine the success of attaining complete Descemet's membrane (DM) separation from corneal stroma through Anwar's "big-bubble" technique of deep anterior lamellar keratoplasty (DALK) for complete stromal removal. A partial trephination was followed by a lamellar dissection of the anterior stroma. Deep stromal air injection was then attempted to achieve the big bubble to help separate the stroma from the DM. To confirm that a big bubble had been achieved, a small air bubble was injected into the anterior chamber (AC) through a limbal paracentesis. If the small bubble is then seen at the corneal periphery, it confirms that the big-bubble separation of DM was successful because the convex nature of the bubble will cause it to protrude posteriorly, forcing the small AC bubble to the periphery. If the small AC bubble is not seen in the corneal periphery, this means that it is present in the centre, beneath the opaque corneal stroma, and therefore the big bubble has not been achieved. We used the small-bubble technique to confirm the presence of the big bubble in three (one keratoconus, one interstitial keratitis and one dense corneal scar) out of 41 patients who underwent DALK. The small-bubble technique confirmed that the big bubble was achieved in the eye of all three patients. Complete stromal removal with baring of the DM was achieved, and postoperatively all three eyes achieved best corrected vision of 6/6. The small-bubble technique can be a useful surgical tool for corneal surgeons attempting lamellar keratoplasty using the big-bubble technique. It helps in confirming the separation of DM from the deep stroma, which is important in achieving total stromal replacement. It will help to make the transition to lamellar keratoplasty smoother, enhance corneal graft success and improve visual outcomes in patients.

Evaluation of remediation techniques in soils affected by residual contamination with heavy metals and arsenic.

PubMed

García-Carmona, M; Romero-Freire, A; Sierra Aragón, M; Martínez Garzón, F J; Martín Peinado, F J

2017-04-15

Residual soil pollution from the Aznalcóllar mine spill is still a problem in some parts of the affected area, today converted in the Guadiamar Green Corridor. Dispersed spots of polluted soils, identified by the absence of vegetation, are characterized by soil acid pH and high concentrations of As, Pb, Cu and Zn. Ex situ remediation techniques were performed with unrecovered soil samples. Landfarming, Composting and Biopiles techniques were tested in order to immobilize pollutants, to improve soil properties and to promote vegetation recovery. The effectiveness of these techniques was assessed by toxicity bioassays: Lactuca sativa L. root elongation test, Vibrio fischeri bioluminescence reduction test, soil induced respiration test, and Eisenia andrei survival and metal bioaccumulation tests. Landfarming and Composting were not effective techniques, mainly due to the poor improvement of soil properties which maintained high soluble concentrations of Zn and Cu after treatments. Biopile technique, using adjacent recovered soils in the area, was the most effective action in the reduction of soil toxicity; the improvement of soil properties and the reduction in pollutants solubility were key to improve the response of the tested organisms. Therefore, the mixture of recovered soils with polluted soils in the areas affected by residual contamination is considered a more suitable technique to reduce the residual pollution and to promote the complete soil recovery in the Guadiamar Green Corridor. Copyright © 2016 Elsevier Ltd. All rights reserved.

Sampling versus systematic full lymphatic dissection in surgical treatment of non-small cell lung cancer.

PubMed

Koulaxouzidis, Georgios; Karagkiouzis, Grigorios; Konstantinou, Marios; Gkiozos, Ioannis; Syrigos, Konstantinos

2013-04-22

The extent of mediastinal lymph node assessment during surgery for non-small cell cancer remains controversial. Different techniques are used, ranging from simple visual inspection of the unopened mediastinum to an extended bilateral lymph node dissection. Furthermore, different terms are used to define these techniques. Sampling is the removal of one or more lymph nodes under the guidance of pre-operative findings. Systematic (full) nodal dissection is the removal of all mediastinal tissue containing the lymph nodes systematically within anatomical landmarks. A Medline search was conducted to identify articles in the English language that addressed the role of mediastinal lymph node resection in the treatment of non-small cell lung cancer. Opinions as to the reasons for favoring full lymphatic dissection include complete resection, improved nodal staging and better local control due to resection of undetected micrometastasis. Arguments against routine full lymphatic dissection are increased morbidity, increase in operative time, and lack of evidence of improved survival. For complete resection of non-small cell lung cancer, many authors recommend a systematic nodal dissection as the standard approach during surgery, and suggest that this provides both adequate nodal staging and guarantees complete resection. Whether extending the lymph node dissection influences survival or recurrence rate is still not known. There are valid arguments in favor in terms not only of an improved local control but also of an improved long-term survival. However, the impact of lymph node dissection on long-term survival should be further assessed by large-scale multicenter randomized trials.

Training oncoplastic breast surgeons: the Canadian fellowship experience

PubMed Central

Maxwell, J.; Arnaout, A.; Hanrahan, R.; Brackstone, M.

2017-01-01

Background Oncoplastic breast surgery combines traditional oncologic breast conservation with plastic surgery techniques to achieve improved aesthetic and quality-of-life outcomes without sacrificing oncologic safety. Clinical uptake and training remain limited in the Canadian surgical system. In the present article, we detail the current state of oncoplastic surgery (ops) training in Canada, the United States, and worldwide, as well as the experience of a Canadian clinical fellow in ops. Methods The clinical fellow undertook a 9-month audit of breast surgical cases. All cases performed during the fellow’s ops fellowship were included. The fellowship ran from October 2015 to June 2016. Results During the 9 months of the fellowship, 67 mastectomies were completed (30 simple, 17 modified radical, 12 skin-sparing, and 8 nipple-sparing). The fellow participated in 13 breast reconstructions. Of 126 lumpectomies completed, 79 incorporated oncoplastic techniques. Conclusions The experience of the most recent ops clinical fellow suggests that Canadian ops training is feasible and achievable. Commentary on the current state of Canadian ops training suggests areas for improvement. Oncoplastic surgery is an important skill for breast surgical oncologists, and access to training should be improved for Canadian surgeons. PMID:29089810

Upgrades for the CMS simulation

DOE PAGES

Lange, D. J.; Hildreth, M.; Ivantchenko, V. N.; ...

2015-05-22

Over the past several years, the CMS experiment has made significant changes to its detector simulation application. The geometry has been generalized to include modifications being made to the CMS detector for 2015 operations, as well as model improvements to the simulation geometry of the current CMS detector and the implementation of a number of approved and possible future detector configurations. These include both completely new tracker and calorimetry systems. We have completed the transition to Geant4 version 10, we have made significant progress in reducing the CPU resources required to run our Geant4 simulation. These have been achieved throughmore » both technical improvements and through numerical techniques. Substantial speed improvements have been achieved without changing the physics validation benchmarks that the experiment uses to validate our simulation application for use in production. As a result, we will discuss the methods that we implemented and the corresponding demonstrated performance improvements deployed for our 2015 simulation application.« less

Redundancy management of inertial systems.

NASA Technical Reports Server (NTRS)

Mckern, R. A.; Musoff, H.

1973-01-01

The paper reviews developments in failure detection and isolation techniques applicable to gimballed and strapdown systems. It examines basic redundancy management goals of improved reliability, performance and logistic costs, and explores mechanizations available for both input and output data handling. The meaning of redundant system reliability in terms of available coverage, system MTBF, and mission time is presented and the practical hardware performance limitations of failure detection and isolation techniques are explored. Simulation results are presented illustrating implementation coverages attainable considering IMU performance models and mission detection threshold requirements. The implications of a complete GN&C redundancy management method on inertial techniques are also explored.

Communication--Its Effect on the Self-Concept of Children. A South African Perspective.

ERIC Educational Resources Information Center

Akande, Adebowale; And Others

1995-01-01

Replicated a study of the relationship between children's self-esteem and communication skills. Fourth- and fifth-grade students completed instruments on self-esteem and communication skills then received a four-session treatment on techniques for effective communication. Results indicated moderately improved communication skills but only marginal…

Role of Stream Restoration on Improving Benthic Macroinvertebrates and In-Stream Water Quality in an Urban Watershed

EPA Science Inventory

Many stream restoration projects do not include a requirement for long-term monitoring after the project has been completed, resulting in a lack of information about the success or failure of certain restoration techniques. The National Risk Management Research Laboratory (NRMRL...

A Data-Driven Solution for Performance Improvement

NASA Technical Reports Server (NTRS)

2002-01-01

Marketed as the "Software of the Future," Optimal Engineering Systems P.I. EXPERT(TM) technology offers statistical process control and optimization techniques that are critical to businesses looking to restructure or accelerate operations in order to gain a competitive edge. Kennedy Space Center granted Optimal Engineering Systems the funding and aid necessary to develop a prototype of the process monitoring and improvement software. Completion of this prototype demonstrated that it was possible to integrate traditional statistical quality assurance tools with robust optimization techniques in a user- friendly format that is visually compelling. Using an expert system knowledge base, the software allows the user to determine objectives, capture constraints and out-of-control processes, predict results, and compute optimal process settings.

Modified fluoroscopy-guided sacroiliac joint injection: a technical report.

PubMed

Liliang, Po-Chou; Liang, Cheng-Loong; Lu, Kang; Weng, Hui-Ching; Syu, Fei-Kai

2014-09-01

Sacroiliac joint (SIJ) injection can occasionally be challenging. We describe our experience in using conventional technique, and we developed an adjustment to overcome difficulties incurred. Conventional technique required superimposition of the posterior and anterior SIJ lines. If this technique failed to provide entry into the joint, fluoroscopy was slightly adjusted to obtain an oblique view. Of 50 SIJ injections, 29 (58%; 44-72%) were successfully performed using conventional technique. In another 21 procedures, 18 (85.7%; 64-99%) were subsequently completed using oblique view technique. The medial joint line, viewed from this angle, corresponded to the posterior joint line in 17 cases. The lateral joint line corresponded to the posterior joint line in one case. Oblique view technique can improve the success rate of SIJ injection. Wiley Periodicals, Inc.

Quality of narrative operative reports in pancreatic surgery

PubMed Central

Wiebe, Meagan E.; Sandhu, Lakhbir; Takata, Julie L.; Kennedy, Erin D.; Baxter, Nancy N.; Gagliardi, Anna R.; Urbach, David R.; Wei, Alice C.

2013-01-01

Background Quality in health care can be evaluated using quality indicators (QIs). Elements contained in the surgical operative report are potential sources for QI data, but little is known about the completeness of the narrative operative report (NR). We evaluated the completeness of the NR for patients undergoing a pancreaticoduodenectomy. Methods We reviewed NRs for patients undergoing a pancreaticoduodenectomy over a 1-year period. We extracted 79 variables related to patient and narrator characteristics, process of care measures, surgical technique and oncology-related outcomes by document analysis. Data were coded and evaluated for completeness. Results We analyzed 74 NRs. The median number of variables reported was 43.5 (range 13–54). Variables related to surgical technique were most complete. Process of care and oncology-related variables were often omitted. Completeness of the NR was associated with longer operative duration. Conclusion The NRs were often incomplete and of poor quality. Important elements, including process of care and oncology-related data, were frequently missing. Thus, the NR is an inadequate data source for QI. Development and use of alternative reporting methods, including standardized synoptic operative reports, should be encouraged to improve documentation of care and serve as a measure of quality of surgical care. PMID:24067527

Quality of narrative operative reports in pancreatic surgery.

PubMed

Wiebe, Meagan E; Sandhu, Lakhbir; Takata, Julie L; Kennedy, Erin D; Baxter, Nancy N; Gagliardi, Anna R; Urbach, David R; Wei, Alice C

2013-10-01

Quality in health care can be evaluated using quality indicators (QIs). Elements contained in the surgical operative report are potential sources for QI data, but little is known about the completeness of the narrative operative report (NR). We evaluated the completeness of the NR for patients undergoing a pancreaticoduodenectomy. We reviewed NRs for patients undergoing a pancreaticoduodenectomy over a 1-year period. We extracted 79 variables related to patient and narrator characteristics, process of care measures, surgical technique and oncology-related outcomes by document analysis. Data were coded and evaluated for completeness. We analyzed 74 NRs. The median number of variables reported was 43.5 (range 13-54). Variables related to surgical technique were most complete. Process of care and oncology-related variables were often omitted. Completeness of the NR was associated with longer operative duration. The NRs were often incomplete and of poor quality. Important elements, including process of care and oncology-related data, were frequently missing. Thus, the NR is an inadequate data source for QI. Development and use of alternative reporting methods, including standardized synoptic operative reports, should be encouraged to improve documentation of care and serve as a measure of quality of surgical care.

Digital radiography: spatial and contrast resolution

NASA Astrophysics Data System (ADS)

Bjorkholm, Paul; Annis, M.; Frederick, E.; Stein, J.; Swift, R.

1981-07-01

The addition of digital image collection and storage to standard and newly developed x-ray imaging techniques has allowed spectacular improvements in some diagnostic procedures. There is no reason to expect that the developments in this area are yet complete. But no matter what further developments occur in this field, all the techniques will share a common element, digital image storage and processing. This common element alone determines some of the important imaging characteristics. These will be discussed using one system, the Medical MICRODOSE System as an example.

Increased oil production and reserves from improved completion techniques in the Bluebell field, Uinta Basin, Utah. Tenth quarterly technical progress report, January 1, 1996--March 31, 1996. Revised

DOE Office of Scientific and Technical Information (OSTI.GOV)

Allison, M.L.

1996-05-13

The objective of this project is to increase oil production and reserves in the Uinta Basin by demonstrating improved completion techniques. Low productivity of Uinta Basin will is caused by gross production intervals of several thousand feet that contain perforated thief zones, water-bearing zones, and unperforated oil- bearing intervals. Geologic and engineering characterization and computer simulation of the Green River and Wasatch Formations in the Bluefell field will determine reservoir heterogeneities related to fractures and depositional trends. This will be followed by techniques based on the reservoir characterization. Transfer of the project results will be an ongoing component of themore » project. Data (net pay thickness, porosity, and water saturation) of more than 100 individuals beds in he lower Green River and Wasatch Formations were used to generate geostatistical realization (numerical- representation) of the reservoir properties. The data set was derived from the Michelle Ute and Malnar Pike demonstration wells and 22 other wells in a 20 (52 km{sup 2}) square-mile area. Beds were studied independently of each other. Principles of sequential Gaussian simulations were used to generate geostatistical realizations of the beds.« less

Development and test fuel cell powered on-site integrated total energy systems. Phase 3: Full-scale power plant development

NASA Technical Reports Server (NTRS)

Kaufman, A.

1982-01-01

The on-site system application analysis is summarized. Preparations were completed for the first test of a full-sized single cell. Emphasis of the methanol fuel processor development program shifted toward the use of commercial shell-and-tube heat exchangers. An improved method for predicting the carbon-monoxide tolerance of anode catalysts is described. Other stack support areas reported include improved ABA bipolar plate bonding technology, improved electrical measurement techniques for specification-testing of stack components, and anodic corrosion behavior of carbon materials.

Application of ESPI techniques for the study of dynamic vibrations

NASA Astrophysics Data System (ADS)

Krupka, Rene

2004-06-01

Full field optical measurement techniques have already entered into various fields of industrial applications covering static as well as dynamic phenomena. The electronic speckle pattern interferometry (ESPI) allows the non contact, sensitive and three dimensional measurement of displacements in the sub micron range of objects with dimensions from mm2 to m2. For dynamic and transient phenomena, the use of pulsed laser have already been reported for various applications and successfully proven for the determination of the structural response of different components. In this paper we would like to present recent developments in the field of pulsed ESPI applications where emphasis is put onto the full field measurement result. The use of a completely computer controlled system allows easy access to mode shape characterization, deformation measurements and the characterization of transient events like shock wave propagation. Recent developments of the 3D-PulseESPI technique led to a very compact and complete system with improved characteristics regarding robustness and operation. The integrated design of the illumination laser and sensors for image acquisition allows easy aiming and adjustments with respect to the object of inspection. The laser is completely computer controlled which is advantageously used in a completely automatic brake squeal inspection system, which captures the squealing signal, automatically fires the laser and provides the complete deformation map of the component under test. Examples of recent applications in the field of dynamic structure response, with an emphasis in the field of automotive applications are given.

CARES: Completely Automated Robust Edge Snapper for carotid ultrasound IMT measurement on a multi-institutional database of 300 images: a two stage system combining an intensity-based feature approach with first order absolute moments

NASA Astrophysics Data System (ADS)

Molinari, Filippo; Acharya, Rajendra; Zeng, Guang; Suri, Jasjit S.

2011-03-01

The carotid intima-media thickness (IMT) is the most used marker for the progression of atherosclerosis and onset of the cardiovascular diseases. Computer-aided measurements improve accuracy, but usually require user interaction. In this paper we characterized a new and completely automated technique for carotid segmentation and IMT measurement based on the merits of two previously developed techniques. We used an integrated approach of intelligent image feature extraction and line fitting for automatically locating the carotid artery in the image frame, followed by wall interfaces extraction based on Gaussian edge operator. We called our system - CARES. We validated the CARES on a multi-institutional database of 300 carotid ultrasound images. IMT measurement bias was 0.032 +/- 0.141 mm, better than other automated techniques and comparable to that of user-driven methodologies. Our novel approach of CARES processed 96% of the images leading to the figure of merit to be 95.7%. CARES ensured complete automation and high accuracy in IMT measurement; hence it could be a suitable clinical tool for processing of large datasets in multicenter studies involving atherosclerosis.pre-

Co-streaming classes: a follow-up study in improving the user experience to better reach users.

PubMed

Hayes, Barrie E; Handler, Lara J; Main, Lindsey R

2011-01-01

Co-streaming classes have enabled library staff to extend open classes to distance education students and other users. Student evaluations showed that the model could be improved. Two areas required attention: audio problems experienced by online participants and staff teaching methods. Staff tested equipment and adjusted software configuration to improve user experience. Staff training increased familiarity with specialized teaching techniques and troubleshooting procedures. Technology testing and staff training were completed, and best practices were developed and applied. Class evaluations indicate improvements in classroom experience. Future plans include expanding co-streaming to more classes and on-going data collection, evaluation, and improvement of classes.

Modeling Success: Using Preenrollment Data to Identify Academically At-Risk Students

ERIC Educational Resources Information Center

Gansemer-Topf, Ann M.; Compton, Jonathan; Wohlgemuth, Darin; Forbes, Greg; Ralston, Ekaterina

2015-01-01

Improving student success and degree completion is one of the core principles of strategic enrollment management. To address this principle, institutional data were used to develop a statistical model to identify academically at-risk students. The model employs multiple linear regression techniques to predict students at risk of earning below a…

Nothing about Us without Us! Youth-Led Solutions to Improve High School Completion Rates

ERIC Educational Resources Information Center

Chou, Fred; Kwee, Janelle; Lees, Robert; Firth, Kara; Florence, Jordan; Harms, Jake; Raber, Mya; Stevens, Taylor; Tatomir, Richard; Weaver, Chereca; Wilson, Scott

2015-01-01

This Youth Participatory Action Research (YPAR) study represents a collaboration with six students from alternative education to inquire about the experiences of vulnerable youth--students in alternative education and youth who have dropped out of school. Utilizing the Enhanced Critical Incident Technique, youth researchers asked their peers what…

Early Results of the PETTICOAT Technique for the Management of Acute Type A Aortic Dissection.

PubMed

Kotha, Vamshi Krishna; Pozeg, Zlatko I; Herget, Eric J; Moon, Michael C; Appoo, Jehangir J

2017-08-01

Conventional surgical techniques for acute Type A aortic dissection (ATAAD) generally fail to address residual dissection in the descending aorta. The persistence of a false lumen is associated with visceral malperfusion in the acute setting and adverse aortic remodeling in the chronic setting. Hybrid aortic arch repair techniques may improve perioperative and long-term mortality by expanding the true lumen and obliterating the false lumen. However, there is a limit to the extent of aortic coverage due to the concomitant risk of spinal cord ischemia. In Type B dissection, the PETTICOAT (Provisional Extension To Induce Complete Attachment) technique, which entails stent graft coverage of the primary intimal tear followed by bare metal stent placement distally, may improve true lumen caliber and promote false lumen thrombosis without increasing the risk of spinal cord ischemia, as intercostal branches remain perfused through the bare metal stents. The technique of hybrid arch with surgical creation of a Dacron landing zone covering a stent graft in the proximal descending aorta and bare metal stents in the thoraco-abdominal aorta is a promising concept in the treatment of ATAAD.

Pediatric and neonatal cardiovascular pharmacology.

PubMed

Miller-Hoover, Suzan R

2003-01-01

Advances in cardiology, surgical techniques, postoperative care, and medications have improved the chances of long-term survival of the neonatal and pediatric patient with complex congenital cardiac anomalies. Rather than undergoing palliative repair, these children are now frequently taken to the operating room for complete repair. As complete repair becomes the norm, collaborative management and a thorough understanding of the pre and postoperative medications used become essential to the care of these patients. The nurse's ability to understand preop, postop, and management medications is enhanced by an understanding of the principles of cardiac anatomy and physiology, as well as developmental changes in cardiac function. All of these are reviewed. In addition, since the safe and effective administration of these drugs depends on the pediatric intensive care unit (PICU) and neonatal intensive care unit (NICU) nurse's thorough knowledge of these medications and their effects on the cardiovascular system, a brief review of these medications is presented. While new technology and techniques are improving survival rates for children with congenital heart anomalies, it is the postoperative care that these children receive that enhances the patient's survival even more.

Rehabilitation with 4 zygomatic implants with a new surgical protocol using ultrasonic technique.

PubMed

Mozzati, Marco; Mortellaro, Carmen; Arata, Valentina; Gallesio, Giorgia; Previgliano, Valter

2015-05-01

When the residual bone crest cannot allow the placement of standard implants, the treatment for complete arch rehabilitation of severely atrophic maxillae can be performed with 4 zygomatic implants (ZIs) and immediate function with predictable results in terms of aesthetics, function, and comfort for the patient. However, even if ZIs' rehabilitations showed a good success rate, this surgery is difficult and need a skillful operator. Complications in this kind of rehabilitation are not uncommon; the main difficulties can be related to the reduced surgical visibility and instrument control in a critical anatomic area. All the surgical protocols described in the literature used drilling techniques. Furthermore, the use of ultrasonic instruments in implant surgery compared with drilling instruments have shown advantages in many aspects of surgical procedures, tissues management, enhancement of control, surgical visualization, and healing. The aim of this study was to report on the preliminary experience using ultrasound technique for ZIs surgery in terms of safety and technical improvement. Ten consecutive patients with severely atrophic maxilla have been treated with 4 ZIs and immediate complete arch acrylic resin provisional prostheses. The patients were followed up from 30 to 32 months evaluating implant success, prosthetic success, and patient satisfaction with a questionnaire. No implants were lost during the study period, with a 100% implant and prosthetic success rate. Within the limitations of this preliminary study, these data indicate that ultrasonic implant site preparation for ZIs can be a good alternative to the drilling technique and an improvement for the surgeon.

Plasma properties of hot coronal loops utilizing coordinated SMM and solar research rocket observations

NASA Technical Reports Server (NTRS)

Moses, J. Daniel

1989-01-01

Three improvements in photographic x-ray imaging techniques for solar astronomy are presented. The testing and calibration of a new film processor was conducted; the resulting product will allow photometric development of sounding rocket flight film immediately upon recovery at the missile range. Two fine grained photographic films were calibrated and flight tested to provide alternative detector choices when the need for high resolution is greater than the need for high sensitivity. An analysis technique used to obtain the characteristic curve directly from photographs of UV solar spectra were applied to the analysis of soft x-ray photographic images. The resulting procedure provides a more complete and straightforward determination of the parameters describing the x-ray characteristic curve than previous techniques. These improvements fall into the category of refinements instead of revolutions, indicating the fundamental suitability of the photographic process for x-ray imaging in solar astronomy.

Evaluating the Theoretical Content of Online Physical Activity Information for People with Multiple Sclerosis

PubMed Central

Baillie, Colin P.T.; Galaviz, Karla; Jarvis, Jocelyn W.; Latimer-Cheung, Amy E.

2015-01-01

Background: Physical activity can aid people with multiple sclerosis (MS) in managing symptoms and maintaining functional abilities. The Internet is a preferred source of physical activity information for people with MS and, therefore, a method for the dissemination of behavior change techniques. The purpose of this study was to examine the coverage and quality of physical activity behavior change techniques delivered on the Internet for adults with MS using Abraham and Michie's taxonomy of behavior change techniques. Methods: Using the taxonomy, 20 websites were coded for quality (ie, accuracy of information) and coverage (ie, completeness of information) of theoretical behavior change techniques. Results: Results indicated that most websites covered a mean of 8.05 (SD 3.86, range 3–16) techniques out of a possible 20. Only one of the techniques, provide information on behavior–health link and consequences, was delivered on all websites. The websites demonstrated low mean coverage and quality across all behavior change techniques, with means of 0.64 (SD 0.67) and 0.62 (SD 0.37) on a scale of 0 to 2, respectively. However, coverage and quality improved when websites were examined solely for the techniques that they covered, as opposed to all 20 techniques. Conclusions: This study, which examined quality and coverage of physical activity behavior change techniques described online for people with MS, illustrated that the dissemination of these techniques requires improvement. PMID:25892979

Expansion of transient operating data

NASA Astrophysics Data System (ADS)

Chipman, Christopher; Avitabile, Peter

2012-08-01

Real time operating data is very important to understand actual system response. Unfortunately, the amount of physical data points typically collected is very small and often interpretation of the data is difficult. Expansion techniques have been developed using traditional experimental modal data to augment this limited set of data. This expansion process allows for a much improved description of the real time operating response. This paper presents the results from several different structures to show the robustness of the technique. Comparisons are made to a more complete set of measured data to validate the approach. Both analytical simulations and actual experimental data are used to illustrate the usefulness of the technique.

Novel measurement techniques (development and analysis of silicon solar cells near 20% effciency)

NASA Technical Reports Server (NTRS)

Wolf, M.; Newhouse, M.

1986-01-01

Work in identifying, developing, and analyzing techniques for measuring bulk recombination rates, and surface recombination velocities and rates in all regions of high-efficiency silicon solar cells is presented. The accuracy of the previously developed DC measurement system was improved by adding blocked interference filters. The system was further automated by writing software that completely samples the unkown solar cell regions with data of numerous recombination velocity and lifetime pairs. The results can be displayed in three dimensions and the best fit can be found numerically using the simplex minimization algorithm. Also described is a theoretical methodology to analyze and compare existing dynamic measurement techniques.

Ion Monitoring

DOEpatents

Orr, Christopher Henry; Luff, Craig Janson; Dockray, Thomas; Macarthur, Duncan Whittemore

2003-11-18

The apparatus and method provide a technique for significantly reducing capacitance effects in detector electrodes arising due to movement of the instrument relative to the item/location being monitored in ion detection based techniques. The capacitance variations are rendered less significant by placing an electrically conducting element between the detector electrodes and the monitored location/item. Improved sensitivity and reduced noise signals arise as a result. The technique also provides apparatus and method suitable for monitoring elongate items which are unsuited to complete enclosure in one go within a chamber. The items are monitored part by part as the pass through the instrument, so increasing the range of items or locations which can be successfully monitored.

Novel diagnostic techniques for celiac disease.

PubMed

Kurppa, Kalle; Taavela, Juha; Saavalainen, Päivi; Kaukinen, Katri; Lindfors, Katri

2016-07-01

The diagnosis of celiac disease has long been based on the demonstration of gluten-induced small-bowel mucosal damage. However, due to the constantly increasing disease prevalence and limitations in the histology-based criteria there is a pressure towards more serology-based diagnostics. The serological tools are being improved and new non-invasive methods are being developed, but the constantly refined endoscopic and histologic techniques may still prove helpful. Moreover, growing understanding of the disease pathogenesis has led researchers to suggest completely novel approaches to celiac disease diagnostics regardless of disease activity. In this review, we will elucidate the most recent development and possible future innovations in the diagnostic techniques for celiac disease.

Novel measurement techniques (development and analysis of silicon solar cells near 20% effciency)

NASA Astrophysics Data System (ADS)

Wolf, M.; Newhouse, M.

Work in identifying, developing, and analyzing techniques for measuring bulk recombination rates, and surface recombination velocities and rates in all regions of high-efficiency silicon solar cells is presented. The accuracy of the previously developed DC measurement system was improved by adding blocked interference filters. The system was further automated by writing software that completely samples the unkown solar cell regions with data of numerous recombination velocity and lifetime pairs. The results can be displayed in three dimensions and the best fit can be found numerically using the simplex minimization algorithm. Also described is a theoretical methodology to analyze and compare existing dynamic measurement techniques.

A New Surgical Approach for the Treatment of Conjunctivochalasis: Reduction of the Conjunctival Fold with Bipolar Electrocautery Forceps

PubMed Central

Arenas, Eduardo; Muñoz, Diana

2016-01-01

Aim. To report a new surgical technique for the treatment of conjunctivochalasis. Methods. A new surgical technique in which specially designed bipolar electrocautery forceps facilitate the complete reduction of the conjunctival folds without creating lesions near the corneoscleral limbus was designed. A retrospective revision of the medical records of patients treated with this technique between the years 2011 and 2013 was made, and eighteen eyes of sixteen patients with conjunctivochalasis treated with this new technique were included. Results. All the eyes treated showed a significant improvement with no evidence of scar lesions after a mean follow-up time of 10 months. Conclusions. The surgical technique presented here could be a good alternative for the management of conjunctivochalasis. PMID:27200408

Technique and cue selection for graphical presentation of generic hyperdimensional data

NASA Astrophysics Data System (ADS)

Howard, Lee M.; Burton, Robert P.

2013-12-01

Several presentation techniques have been created for visualization of data with more than three variables. Packages have been written, each of which implements a subset of these techniques. However, these packages generally fail to provide all the features needed by the user during the visualization process. Further, packages generally limit support for presentation techniques to a few techniques. A new package called Petrichor accommodates all necessary and useful features together in one system. Any presentation technique may be added easily through an extensible plugin system. Features are supported by a user interface that allows easy interaction with data. Annotations allow users to mark up visualizations and share information with others. By providing a hyperdimensional graphics package that easily accommodates presentation techniques and includes a complete set of features, including those that are rarely or never supported elsewhere, the user is provided with a tool that facilitates improved interaction with multivariate data to extract and disseminate information.

A Complete Pathological Response to Pembrolizumab following ex vivo Liver Resection in a Patient with Colorectal Liver Metastases.

PubMed

Baimas-George, Maria; Baker, Erin; Kamionek, Michal; Salmon, J Stuart; Sastry, Amit; Levi, David; Vrochides, Dionisios

2018-04-05

Advances in the systemic treatment of stage IV colorectal cancer with liver metastases has offered improved survival rates for patients who otherwise face a dismal prognosis. However, a pathologically complete response (PCR) to chemotherapy for colorectal liver metastases is still rare, and its significance is not fully understood. In this case report, we describe a patient who achieved PCR after neoadjuvant immunotherapy with pembrolizumab and a left hepatectomy using an ex vivo resection technique. © 2018 S. Karger AG, Basel.

DSPI technique for nanometer vibration mode measurement

NASA Astrophysics Data System (ADS)

Yue, Kaiduan; Jia, Shuhai; Tan, Yushan

2000-05-01

A time-average DSPI method for nanometer vibration mode measurement is presented in this paper. The phase continuous scan technique is combined with the Bessel fringe-shifting technique to quantitatively analyze the vibration mode by time-average DSPI is used in measurement system. Through the phase continuous scan, the background and speckle items are completely eliminated, which improves the fringe quality and enhances the signal-to-noise ratio of interferogram. There is no need to calibrate the optical phase-shifter exactly in this method. The anti-disturbance capability of this method is higher than that of the phase-stepping technique, so it is robust and easy to be used. In the vibration measurement system, the speckle average technology is used, so the high quality measuring results are obtained.

Virtual lab demonstrations improve students' mastery of basic biology laboratory techniques.

PubMed

Maldarelli, Grace A; Hartmann, Erica M; Cummings, Patrick J; Horner, Robert D; Obom, Kristina M; Shingles, Richard; Pearlman, Rebecca S

2009-01-01

Biology laboratory classes are designed to teach concepts and techniques through experiential learning. Students who have never performed a technique must be guided through the process, which is often difficult to standardize across multiple lab sections. Visual demonstration of laboratory procedures is a key element in teaching pedagogy. The main goals of the study were to create videos explaining and demonstrating a variety of lab techniques that would serve as teaching tools for undergraduate and graduate lab courses and to assess the impact of these videos on student learning. Demonstrations of individual laboratory procedures were videotaped and then edited with iMovie. Narration for the videos was edited with Audacity. Undergraduate students were surveyed anonymously prior to and following screening to assess the impact of the videos on student lab performance by completion of two Participant Perception Indicator surveys. A total of 203 and 171 students completed the pre- and posttesting surveys, respectively. Statistical analyses were performed to compare student perceptions of knowledge of, confidence in, and experience with the lab techniques before and after viewing the videos. Eleven demonstrations were recorded. Chi-square analysis revealed a significant increase in the number of students reporting increased knowledge of, confidence in, and experience with the lab techniques after viewing the videos. Incorporation of instructional videos as prelaboratory exercises has the potential to standardize techniques and to promote successful experimental outcomes.

Regression Verification Using Impact Summaries

NASA Technical Reports Server (NTRS)

Backes, John; Person, Suzette J.; Rungta, Neha; Thachuk, Oksana

2013-01-01

Regression verification techniques are used to prove equivalence of syntactically similar programs. Checking equivalence of large programs, however, can be computationally expensive. Existing regression verification techniques rely on abstraction and decomposition techniques to reduce the computational effort of checking equivalence of the entire program. These techniques are sound but not complete. In this work, we propose a novel approach to improve scalability of regression verification by classifying the program behaviors generated during symbolic execution as either impacted or unimpacted. Our technique uses a combination of static analysis and symbolic execution to generate summaries of impacted program behaviors. The impact summaries are then checked for equivalence using an o-the-shelf decision procedure. We prove that our approach is both sound and complete for sequential programs, with respect to the depth bound of symbolic execution. Our evaluation on a set of sequential C artifacts shows that reducing the size of the summaries can help reduce the cost of software equivalence checking. Various reduction, abstraction, and compositional techniques have been developed to help scale software verification techniques to industrial-sized systems. Although such techniques have greatly increased the size and complexity of systems that can be checked, analysis of large software systems remains costly. Regression analysis techniques, e.g., regression testing [16], regression model checking [22], and regression verification [19], restrict the scope of the analysis by leveraging the differences between program versions. These techniques are based on the idea that if code is checked early in development, then subsequent versions can be checked against a prior (checked) version, leveraging the results of the previous analysis to reduce analysis cost of the current version. Regression verification addresses the problem of proving equivalence of closely related program versions [19]. These techniques compare two programs with a large degree of syntactic similarity to prove that portions of one program version are equivalent to the other. Regression verification can be used for guaranteeing backward compatibility, and for showing behavioral equivalence in programs with syntactic differences, e.g., when a program is refactored to improve its performance, maintainability, or readability. Existing regression verification techniques leverage similarities between program versions by using abstraction and decomposition techniques to improve scalability of the analysis [10, 12, 19]. The abstractions and decomposition in the these techniques, e.g., summaries of unchanged code [12] or semantically equivalent methods [19], compute an over-approximation of the program behaviors. The equivalence checking results of these techniques are sound but not complete-they may characterize programs as not functionally equivalent when, in fact, they are equivalent. In this work we describe a novel approach that leverages the impact of the differences between two programs for scaling regression verification. We partition program behaviors of each version into (a) behaviors impacted by the changes and (b) behaviors not impacted (unimpacted) by the changes. Only the impacted program behaviors are used during equivalence checking. We then prove that checking equivalence of the impacted program behaviors is equivalent to checking equivalence of all program behaviors for a given depth bound. In this work we use symbolic execution to generate the program behaviors and leverage control- and data-dependence information to facilitate the partitioning of program behaviors. The impacted program behaviors are termed as impact summaries. The dependence analyses that facilitate the generation of the impact summaries, we believe, could be used in conjunction with other abstraction and decomposition based approaches, [10, 12], as a complementary reduction technique. An evaluation of our regression verification technique shows that our approach is capable of leveraging similarities between program versions to reduce the size of the queries and the time required to check for logical equivalence. The main contributions of this work are: - A regression verification technique to generate impact summaries that can be checked for functional equivalence using an off-the-shelf decision procedure. - A proof that our approach is sound and complete with respect to the depth bound of symbolic execution. - An implementation of our technique using the LLVMcompiler infrastructure, the klee Symbolic Virtual Machine [4], and a variety of Satisfiability Modulo Theory (SMT) solvers, e.g., STP [7] and Z3 [6]. - An empirical evaluation on a set of C artifacts which shows that the use of impact summaries can reduce the cost of regression verification.

MO-F-211-01: Methods for Completing Practice Quality Improvement (PQI).

PubMed

Johnson, J; Brown, K; Ibbott, G; Pawlicki, T

2012-06-01

Practice Quality Improvement (PQI) is becoming an expected part of routine practice in healthcare as an approach to provide more efficient, effective and high quality care. Additionally, as part of the ABR's Maintenance of Certification (MOC) pathway, medical physicists are now expected to complete a PQI project. This session will describe the history behind and benefits of the ABR's MOC program, provide details of quality improvement methods and how to successfully complete a PQI project. PQI methods include various commonly used engineering and management tools. The Plan-Do-Study-Act (PDSA) cycle will be presented as one project planning and implementation tool. Other PQI analysis instruments such as flowcharts, Pareto charts, process control charts and fishbone diagrams will also be explained with examples. Cause analysis, solution development and implementation, and post-implementation measurement will be presented. Project identification and definition as well as appropriate measurement tool selection will be offered. Methods to choose key quality metrics (key quality indicators) will also be addressed. Several sample PQI projects and templates available through the AAPM and other organizations will be described. At least three examples of completed PQI projects will be shared. 1. Identify and define a PQI project 2. Identify and select measurement methods/techniques for use with the PQI project 3. Describe example(s) of completed projects. © 2012 American Association of Physicists in Medicine.

Elbow ulnar collateral ligament injuries in athletes: Can we improve our outcomes?

PubMed Central

Redler, Lauren H; Degen, Ryan M; McDonald, Lucas S; Altchek, David W; Dines, Joshua S

2016-01-01

Injury to the ulnar collateral ligament (UCL) most commonly occurs in the overhead throwing athlete. Knowledge surrounding UCL injury pathomechanics continues to improve, leading to better preventative treatment strategies and rehabilitation programs. Conservative treatment strategies for partial injuries, improved operative techniques for reconstruction in complete tears, adjunctive treatments, as well as structured sport specific rehabilitation programs including resistive exercises for the entire upper extremity kinetic chain are all important factors in allowing for a return to throwing in competitive environments. In this review, we explore each of these factors and provide recommendations based on the available literature to improve outcomes in UCL injuries in athletes. PMID:27114930

Impact of densification on microstructure and transport properties of CaFe5O7

NASA Astrophysics Data System (ADS)

Delacotte, C.; Hébert, S.; Hardy, V.; Bréard, Y.; Maki, R.; Mori, T.; Pelloquin, D.

2016-04-01

Monophasic CaFe5O7 ceramic has been synthesized by solid state route. Its microstructural features have been studied by diffraction techniques and electron microscopy images before and after Spark Plasma Sintering (SPS) annealings. This work is completed by measurements of electrical and thermal properties. Especially, attention is focused around the structural and electronic transition at 360 K for which specific heat measurements have revealed a sharp peak. Densification by SPS techniques led to a significant improvement of electrical conductivity above 360 K.

Improved Power System Stability Using Backtracking Search Algorithm for Coordination Design of PSS and TCSC Damping Controller.

PubMed

Niamul Islam, Naz; Hannan, M A; Mohamed, Azah; Shareef, Hussain

2016-01-01

Power system oscillation is a serious threat to the stability of multimachine power systems. The coordinated control of power system stabilizers (PSS) and thyristor-controlled series compensation (TCSC) damping controllers is a commonly used technique to provide the required damping over different modes of growing oscillations. However, their coordinated design is a complex multimodal optimization problem that is very hard to solve using traditional tuning techniques. In addition, several limitations of traditionally used techniques prevent the optimum design of coordinated controllers. In this paper, an alternate technique for robust damping over oscillation is presented using backtracking search algorithm (BSA). A 5-area 16-machine benchmark power system is considered to evaluate the design efficiency. The complete design process is conducted in a linear time-invariant (LTI) model of a power system. It includes the design formulation into a multi-objective function from the system eigenvalues. Later on, nonlinear time-domain simulations are used to compare the damping performances for different local and inter-area modes of power system oscillations. The performance of the BSA technique is compared against that of the popular particle swarm optimization (PSO) for coordinated design efficiency. Damping performances using different design techniques are compared in term of settling time and overshoot of oscillations. The results obtained verify that the BSA-based design improves the system stability significantly. The stability of the multimachine power system is improved by up to 74.47% and 79.93% for an inter-area mode and a local mode of oscillation, respectively. Thus, the proposed technique for coordinated design has great potential to improve power system stability and to maintain its secure operation.

Edge enhancement and noise suppression for infrared image based on feature analysis

NASA Astrophysics Data System (ADS)

Jiang, Meng

2018-06-01

Infrared images are often suffering from background noise, blurred edges, few details and low signal-to-noise ratios. To improve infrared image quality, it is essential to suppress noise and enhance edges simultaneously. To realize it in this paper, we propose a novel algorithm based on feature analysis in shearlet domain. Firstly, as one of multi-scale geometric analysis (MGA), we introduce the theory and superiority of shearlet transform. Secondly, after analyzing the defects of traditional thresholding technique to suppress noise, we propose a novel feature extraction distinguishing image structures from noise well and use it to improve the traditional thresholding technique. Thirdly, with computing the correlations between neighboring shearlet coefficients, the feature attribute maps identifying the weak detail and strong edges are completed to improve the generalized unsharped masking (GUM). At last, experiment results with infrared images captured in different scenes demonstrate that the proposed algorithm suppresses noise efficiently and enhances image edges adaptively.

Improved recovery demonstration for Williston Basin carbonates. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sippel, M.A.

The purpose of this project was to demonstrate targeted infill and extension drilling opportunities, better determinations of oil-in-place, and methods for improved completion efficiency. The investigations and demonstrations were focussed on Red River and Ratcliffe reservoirs in the Williston Basin within portions of Montana, North Dakota and South Dakota. Both of these formations have been successfully explored with conventional 2-dimensional (2D) seismic. Improved reservoir characterization utilizing 3-dimensional (3D) seismic was investigated for identification of structural and stratigraphic reservoir compartments. These seismic characterizations were integrated with geological and engineering studies. The project tested lateral completion techniques, including high-pressure jetting lance technologymore » and short-radius lateral drilling to enhance completion efficiency. Lateral completions should improve economics for both primary and secondary oil where low permeability is a problem and higher-density drilling of vertical infill wells is limited by drilling cost. New vertical wells were drilled to test bypassed oil in ares that were identified by 3D seismic. These new wells are expected to recover as much or greater oil than was produced by nearby old wells. The project tested water injection through vertical and horizontal wells in reservoirs where application of waterflooding has been limited. A horizontal well was drilled for testing water injection. Injection rates were tested at three times that of a vertical well. This demonstration well shows that water injection with horizontal completions can improve injection rates for economic waterflooding. This report is divided into two sections, part 1 covers the Red River and part 2 covers the Ratcliffe. Each part summarizes integrated reservoir characterizations and outlines methods for targeting by-passed oil reserves in the respective formation and locality.« less

AspectAssay: A Technique for Expanding the Pool of Available Aspect Mining Test Data Using Concern Seeding

ERIC Educational Resources Information Center

Moore, David G., Jr.

2013-01-01

Aspect-oriented software design (AOSD) enables better and more complete separation of concerns in software-intensive systems. By extracting aspect code and relegating crosscutting functionality to aspects, software engineers can improve the maintainability of their code by reducing code tangling and coupling of code concerns. Further, the number…

Comparison of three different adenoidectomy techniques in children - has the conventional technique been surpassed?

PubMed

Ferreira, Mayra Soares; Mangussi-Gomes, João; Ximendes, Roberta; Evangelista, Anne Rosso; Miranda, Eloá Lumi; Garcia, Leonardo Bomediano; Stamm, Aldo C

2018-01-01

Pharyngeal tonsil hyperplasia is the most frequent cause of nasal obstruction and chronic mouth breathing during childhood. Adenoidectomy is the procedure of choice for the resolution of these symptoms. It is not yet known, however, whether the conventional technique ("blind curettage") has been surpassed by more modern adenoidectomy techniques (video-assisted, with the aid of instruments). This study aimed to compare the conventional adenoidectomy technique with two other emerging techniques, performed in a reference otorhinolaryngology center. This is a prospective and observational study of 33 children submitted to adenoidectomy using 3 different techniques that were followed up for a period of 3 months after surgery. The patients were divided into 3 different groups, according to the adenoidectomy technique: Group A (conventional technique - "blind curettage"); Group B (video-assisted adenoidectomy with microdebrider); Group C (video-assisted adenoidectomy with radiofrequency - Coblation ® ). The surgical time of each procedure was measured, being considered from the moment of insertion of the mouth gag until complete hemostasis was achieved. The questionnaire for quality of life OSA-18 was applied to all caregivers on the day of the surgery and 30-90 days after the procedure. Postoperative complications were also analyzed. For the entire patient sample, there was an improvement in quality of life after the surgery (p < 0.05). When analyzing the evolution of OSA-18 index, all groups showed statistically significant improvement, for all assessed domains. There were no statistically significant differences between the 3 techniques assessed for quality of life improvement after the surgery (p > 0.05). Regarding the duration of the procedure, the conventional technique showed the shortest surgical time when compared to the others (p < 0.05). No postoperative complications were noted, for any patient. The adenoidectomy resulted in improvement of quality of life, and there were no major postoperative complications, for all operated children, regardless of the technique used. The conventional technique was faster when compared to the more modern adenoidectomy techniques. Copyright © 2017 Elsevier B.V. All rights reserved.

Extensive air showers (HE-4)

NASA Technical Reports Server (NTRS)

Clay, R. W.

1986-01-01

Ultra high energy (UHE) gamma ray astronomy is an exciting area which has added a new sense of purpose to ground based array work. There is much to be done before UHE gamma ray showers can be understood properly and it is important to remain conservative with claims while the properties of such showers are still not clear. The muon content is only one of the properties that needs to be clarified. It remains to be seen how well progress occurs on the second order problem of detailed interaction parameters once the gross features are clarified. The shower disk thickness has become an area of intense study with interest in Linsley's technique for measuremnts of giant showers and in the study of structure near the core for improving fast timing and studying delayed subshowers. Perhaps the most significant area of promise for the future is individual shower develpments with Cerenkov and, particularly, air fluorescence techniques. The importance and potential of having relatively complete information on a complete set of individual showers can hardly be overestimated. A complete understanding of the observation process is needed to determine whether or not the recorded data set is complete at a given energy, apparent core distance, and zenith angle.

Transoral robotic thyroidectomy: a preclinical feasibility study using the da Vinci Xi platform.

PubMed

Russell, Jonathon O; Noureldine, Salem I; Al Khadem, Mai G; Chaudhary, Hamad A; Day, Andrew T; Kim, Hoon Yub; Tufano, Ralph P; Richmon, Jeremy D

2017-09-01

Transoral thyroid surgery allows the surgeon to conceal incisions within the oral cavity without significantly increasing the amount of required dissection. TORT provides an ideal scarless, midline access to the thyroid gland and bilateral central neck compartments. This approach, however, presents multiple technical challenges. Herein, we present our experience using the latest generation robotic surgical system to accomplish transoral robotic thyroidectomy (TORT). In two human cadavers, the da Vinci Xi surgical system (Intuitive Surgical, Sunnyvale, CA, USA) was used to complete TORT. Total thyroidectomy and bilateral central neck dissection was successfully completed in both cadavers. The da Vinci Xi platform offered several technologic advantages over previous robotic generations including overhead docking, narrower arms, and improved range of motion allowing for improved execution of previously described TORT techniques.

Landing Technique Improvements After an Aquatic-Based Neuromuscular Training Program in Physically Active Women.

PubMed

Scarneo, Samantha E; Root, Hayley J; Martinez, Jessica C; Denegar, Craig; Casa, Douglas J; Mazerolle, Stephanie M; Dann, Catie L; Aerni, Giselle A; DiStefano, Lindsay J

2017-01-01

Neuromuscular training programs (NTPs) improve landing technique and decrease vertical ground-reaction forces (VGRFs), resulting in injury-risk reduction. NTPs in an aquatic environment may elicit the same improvements as land-based programs with reduced joint stress. To examine the effects of an aquatic NTP on landing technique as measured by the Landing Error Scoring System (LESS) and VGRFs, immediately and 4 mo after the intervention. Repeated measures, pool and laboratory. Fifteen healthy, recreationally active women (age 21 ± 2 y, mass 62.02 ± 8.18 kg, height 164.74 ± 5.97 cm) who demonstrated poor landing technique (LESS-Real Time > 4). All participants completed an aquatic NTP 3 times/wk for 6 wk. Participants' landing technique was evaluated using a jump-landing task immediately before (PRE), immediately after (POST), and 4 mo after (RET) the intervention period. A single rater, blinded to time point, graded all videos using the LESS, which is a valid and reliable movement-screening tool. Peak VGRFs were measured during the stance phase of the jump-landing test. Repeated-measure analyses of variance with planned comparisons were performed to explore differences between time points. LESS scores were lower at POST (4.46 ± 1.69 errors) and at RET (4.2 ± 1.72 errors) than at PRE (6.30 ± 1.78 errors) (P < .01). No significant differences were observed between POST and RET (P > .05). Participants also landed with significantly lower peak VGRFs (P < .01) from PRE (2.69 ± .72 N) to POST (2.23 ± .66 N). The findings introduce evidence that an aquatic NTP improves landing technique and suggest that improvements are retained over time. These results show promise of using an aquatic NTP when there is a desire to reduce joint loading, such as early stages of rehabilitation, to improve biomechanics and reduce injury risk.

Photobleaching correction in fluorescence microscopy images

NASA Astrophysics Data System (ADS)

Vicente, Nathalie B.; Diaz Zamboni, Javier E.; Adur, Javier F.; Paravani, Enrique V.; Casco, Víctor H.

2007-11-01

Fluorophores are used to detect molecular expression by highly specific antigen-antibody reactions in fluorescence microscopy techniques. A portion of the fluorophore emits fluorescence when irradiated with electromagnetic waves of particular wavelengths, enabling its detection. Photobleaching irreversibly destroys fluorophores stimulated by radiation within the excitation spectrum, thus eliminating potentially useful information. Since this process may not be completely prevented, techniques have been developed to slow it down or to correct resulting alterations (mainly, the decrease in fluorescent signal). In the present work, the correction by photobleaching curve was studied using E-cadherin (a cell-cell adhesion molecule) expression in Bufo arenarum embryos. Significant improvements were observed when applying this simple, inexpensive and fast technique.

The Study of an Integrated Rating System for Supplier Quality Performance in the Semiconductor Industry

NASA Astrophysics Data System (ADS)

Lee, Yu-Cheng; Yen, Tieh-Min; Tsai, Chih-Hung

This study provides an integrated model of Supplier Quality Performance Assesment (SQPA) activity for the semiconductor industry through introducing the ISO 9001 management framework, Importance-Performance Analysis (IPA) Supplier Quality Performance Assesment and Taguchi`s Signal-to-Noise Ratio (S/N) techniques. This integrated model provides a SQPA methodology to create value for all members under mutual cooperation and trust in the supply chain. This method helps organizations build a complete SQPA framework, linking organizational objectives and SQPA activities to optimize rating techniques to promote supplier quality improvement. The techniques used in SQPA activities are easily understood. A case involving a design house is illustrated to show our model.

[The usage of inferior turbinate mucosal flap for repairing cleft lip].

PubMed

Gao, Pu; Zhao, Min; Qi, Ke-ming; Zhao, Zhen-min; Xiong, Bin

2004-05-01

To evaluate a technique for decreasing the tension of the nasal floor during the procedures of repairing complete clef lip. With the designation of an inferior turbinate mucosal flap combined with an oral mucosal flap in the splitting side, the tension was effectively decreased and the nasal floor was closed easily. Eighteen patients was selected for the treatment with this technique since 2000. The follow-ups were 10 to 24 months. All of the patients showed wound healing well with the significant improvement in the donor site. The above mentioned technique may effectively decrease the tension and be used to close the nasal floor safely. It could also reduce the incidence of the complications.

Pre-cementation of deep shaft

NASA Astrophysics Data System (ADS)

Heinz, W. F.

1988-12-01

Pre-cementation or pre-grouting of deep shafts in South Africa is an established technique to improve safety and reduce water ingress during shaft sinking. The recent completion of several pre-cementation projects for shafts deeper than 1000m has once again highlighted the effectiveness of pre-grouting of shafts utilizing deep slimline boreholes and incorporating wireline technique for drilling and conventional deep borehole grouting techniques for pre-cementation. Pre-cementation of deep shaft will: (i) Increase the safety of shaft sinking operation (ii) Minimize water and gas inflow during shaft sinking (iii) Minimize the time lost due to additional grouting operations during sinking of the shaft and hence minimize costly delays and standing time of shaft sinking crews and equipment. (iv) Provide detailed information of the geology of the proposed shaft site. Informations on anomalies, dykes, faults as well as reef (gold bearing conglomerates) intersections can be obtained from the evaluation of cores of the pre-cementation boreholes. (v) Provide improved rock strength for excavations in the immediate vicinity of the shaft area. The paper describes pre-cementation techniques recently applied successfully from surface and some conclusions drawn for further considerations.

Early Results of the PETTICOAT Technique for the Management of Acute Type A Aortic Dissection

PubMed Central

Kotha, Vamshi Krishna; Pozeg, Zlatko I.; Herget, Eric J.; Moon, Michael C.; Appoo, Jehangir J.

2017-01-01

Conventional surgical techniques for acute Type A aortic dissection (ATAAD) generally fail to address residual dissection in the descending aorta. The persistence of a false lumen is associated with visceral malperfusion in the acute setting and adverse aortic remodeling in the chronic setting. Hybrid aortic arch repair techniques may improve perioperative and long-term mortality by expanding the true lumen and obliterating the false lumen. However, there is a limit to the extent of aortic coverage due to the concomitant risk of spinal cord ischemia. In Type B dissection, the PETTICOAT (Provisional Extension To Induce Complete Attachment) technique, which entails stent graft coverage of the primary intimal tear followed by bare metal stent placement distally, may improve true lumen caliber and promote false lumen thrombosis without increasing the risk of spinal cord ischemia, as intercostal branches remain perfused through the bare metal stents. The technique of hybrid arch with surgical creation of a Dacron landing zone covering a stent graft in the proximal descending aorta and bare metal stents in the thoraco-abdominal aorta is a promising concept in the treatment of ATAAD. PMID:29657948

Practical semen analysis: from A to Z

PubMed Central

Brazil, Charlene

2010-01-01

Accurate semen analysis is critical for decisions about patient care, as well as for studies addressing overall changes in semen quality, contraceptive efficacy and effects of toxicant exposure. The standardization of semen analysis is very difficult for many reasons, including the use of subjective techniques with no standards for comparison, poor technician training, problems with proficiency testing and a reluctance to change techniques. The World Health Organization (WHO) Semen handbook (2010) offers a vastly improved set of standardized procedures, all at a level of detail that will preclude most misinterpretations. However, there is a limit to what can be learned from words and pictures alone. A WHO-produced DVD that offers complete demonstrations of each technique along with quality assurance standards for motility, morphology and concentration assessments would enhance the effectiveness of the manual. However, neither the manual nor a DVD will help unless there is general acknowledgement of the critical need to standardize techniques and rigorously pursue quality control to ensure that laboratories actually perform techniques 'according to WHO' instead of merely reporting that they have done so. Unless improvements are made, patient results will continue to be compromised and comparison between studies and laboratories will have limited merit. PMID:20111076

Restoration of bladder function in spastic neuropathic bladder using sacral deafferentation and different techniques of neurostimulation.

PubMed

Schumacher, S; Bross, S; Scheepe, J R; Alken, P; Jünemann, K P

1999-01-01

Conventional sacral anterior root stimulation (SARS) results in simultaneous activation of both the detrusor muscle and the external urethral sphincter. We evaluated the possibilities of different neurostimulation techniques to overcome stimulation induced detrusor-sphincter-dyssynergia and to achieve a physiological voiding. The literature was reviewed on different techniques of sacral anterior root stimulation of the bladder and the significance of posterior rhizotomy in patients with supraconal spinal cord injury suffering from the loss of voluntary bladder control, detrusor hyperreflexia and sphincter spasm. The achievement of selective detrusor activation would improve current sacral neurostimulation of the bladder, including the principle of "poststimulus voiding". This is possible with the application of selective neurostimulation in techniques of anodal block, high frequency block, depolarizing prepulses and cold block. Nowadays, sacral deafferentation is a standard therapy in combination with neurostimulation of the bladder because in conclusion advantages of complete rhizotomy predominate. The combination of sacral anterior root stimulation and sacral deafferentation is a successful procedure for restoration of bladder function in patients with supraconal spinal cord injury. Anodal block technique and cryotechnique are excellent methods for selective bladder activation to avoid detrusor-sphincter-dyssynergia and thus improve stimulation induced voiding.

PETPVC: a toolbox for performing partial volume correction techniques in positron emission tomography

NASA Astrophysics Data System (ADS)

Thomas, Benjamin A.; Cuplov, Vesna; Bousse, Alexandre; Mendes, Adriana; Thielemans, Kris; Hutton, Brian F.; Erlandsson, Kjell

2016-11-01

Positron emission tomography (PET) images are degraded by a phenomenon known as the partial volume effect (PVE). Approaches have been developed to reduce PVEs, typically through the utilisation of structural information provided by other imaging modalities such as MRI or CT. These methods, known as partial volume correction (PVC) techniques, reduce PVEs by compensating for the effects of the scanner resolution, thereby improving the quantitative accuracy. The PETPVC toolbox described in this paper comprises a suite of methods, both classic and more recent approaches, for the purposes of applying PVC to PET data. Eight core PVC techniques are available. These core methods can be combined to create a total of 22 different PVC techniques. Simulated brain PET data are used to demonstrate the utility of toolbox in idealised conditions, the effects of applying PVC with mismatched point-spread function (PSF) estimates and the potential of novel hybrid PVC methods to improve the quantification of lesions. All anatomy-based PVC techniques achieve complete recovery of the PET signal in cortical grey matter (GM) when performed in idealised conditions. Applying deconvolution-based approaches results in incomplete recovery due to premature termination of the iterative process. PVC techniques are sensitive to PSF mismatch, causing a bias of up to 16.7% in GM recovery when over-estimating the PSF by 3 mm. The recovery of both GM and a simulated lesion was improved by combining two PVC techniques together. The PETPVC toolbox has been written in C++, supports Windows, Mac and Linux operating systems, is open-source and publicly available.

Learning Style Differences in Adult Students' Perceptions of the Effectiveness of Classroom Techniques for Teaching Quantitative Skills

ERIC Educational Resources Information Center

Deever, Walter Thomas

2012-01-01

More than half of adults in the USA have quantitative literacy ratings at or below a basic level. This lack of literacy often becomes a barrier to employability. To overcome this barrier, adults are returning to college to improve their quantitative skills and complete an undergraduate education, often through an accelerated degree program. A…

SOLVE II: A Technique to Improve Efficiency and Solve Problems in Hardwood Sawmills

Treesearch

Edward L. Adams; Daniel E. Dunmire

1977-01-01

The squeeze between rising costs and product values is getting tighter for sawmill managers. So, they are taking a closer took at the efficiency of their sawmills by making a complete analysis of their milling situation. Such an analysis requires considerable time and expense. To aid the manager with this task, the USDA Forest Service's Northeastern Forest...

Refolding and purification of recombinant L-asparaginase from inclusion bodies of E. coli into active tetrameric protein

PubMed Central

Upadhyay, Arun K.; Singh, Anupam; Mukherjee, K. J.; Panda, Amulya K.

2014-01-01

A tetrameric protein of therapeutic importance, Escherichia coli L-asparaginase-II was expressed in Escherichia coli as inclusion bodies (IBs). Asparaginase IBs were solubilized using low concentration of urea and refolded into active tetrameric protein using pulsatile dilution method. Refolded asparaginase was purified in two steps by ion-exchange and gel filtration chromatographic techniques. The recovery of bioactive asparaginase from IBs was around 50%. The melting temperature (Tm) of the purified asparaginase was found to be 64°C. The specific activity of refolded, purified asparaginase was found to be comparable to the commercial asparaginase (190 IU/mg). Enzymatic activity of the refolded asparaginase was high even at four molar urea solutions, where the IB aggregates are completely solubilized. From the comparison of chemical denaturation data and activity at different concentrations of guanidine hydrochloride, it was observed that dissociation of monomeric units precedes the complete loss of helical secondary structures. Protection of the existing native-like protein structure during solubilization of IB aggregates with 4 M urea improved the propensity of monomer units to form oligomeric structure. Our mild solubilization technique retaining native-like structures, improved recovery of asparaginase in bioactive tetrameric form. PMID:25309524

Advancements in NDE for utilities and the petrochemical industry through electromagnetic acoustic transducers (EMATs)

NASA Astrophysics Data System (ADS)

Robertson, M. O.; Stevens, Donald M.; Schlader, Daniel M.; Tilley, Richard M.

1998-03-01

The ultrasonic testing (UT) method continues to broaden in its effectiveness and capabilities for nondestructive evaluation (NDE). Much of this expansion can be attributed to advancements in specific techniques of the method. The utilization of electromagnetic acoustic transducers (EMATs) in dedicated ultrasonic systems has provided McDermott Technology, Inc. (MTI), formerly Babcock & Wilcox, with significant advantages over conventional ultrasonics. In recent years, through significant R&D, MTI has been instrumental in bringing about considerable advancements in the maturing EMAT technology. Progress in electronic design, magnet configurations, and sensor concepts has greatly improved system capabilities while reducing cost and equipment size. These improvements, coupled with the inherent advantages of utilizing the non-contact EMAT technique, have combined to make this technology a viable option for many commercial system inspection applications. MTI has recently completed the development and commercialization of an EMAT-based UT scanner for boiler tube thickness measurements. MTI is currently developing an automated EMAT scanner, based on phased array technology, for complete volumetric inspection of circumferential girth welds associated with pipelines (intended primarily for offshore applications). Additional benefits of phased array technology for providing materials characterization are currently being researched.

[MR tomography of the heart].

PubMed

Hahn, D; Beer, M; Sandstede, J

2000-10-01

The introduction of magnetic resonance (MR) tomography has fundamentally changed radiological diagnosis for many diseases. Invasive digital subtraction angiography has already been widely replaced by noninvasive MR angiography for most of the vascular diseases. The rapid technical development of MR imaging in recent years has opened new functional imaging techniques. MR imaging of the heart allows simultaneous measurement of morphological and functional parameters in a single noninvasive examination without any radiation exposure. Because of the high spatial resolution and the reproducibility cine MR imaging is now the gold standard for functional analysis. With the improvement of myocardial perfusion and viability studies many diseases of the heart can be diagnosed in a single examination. MR spectroscopy is the only method which allows a view of the metabolism of the heart. New examinations for vascular imaging and flow quantification complete the goal of "one-stop-shop" imaging of the heart. MR imaging is the only diagnostic modality which allows a complete evaluation of many diseases of the heart with one technique, basic examination as well as follow-up studies. The very rapid improvement in MRI will overcome most of the limitations in the near future, especially concerning MR coronary angiography.

Multislice CT urography: state of the art.

PubMed

Noroozian, M; Cohan, R H; Caoili, E M; Cowan, N C; Ellis, J H

2004-01-01

Recent improvements in helical CT hardware and software have provided imagers with the tools to obtain an increasingly large number of very thin axial images. As a result, a number of new applications for multislice CT have recently been developed, one of which is CT urography. The motivation for performing CT urography is the desire to create a single imaging test that can completely assess the kidneys and urinary tract for urolithiasis, renal masses and mucosal abnormalities of the renal collecting system, ureters and bladder. Although the preferred technique for performing multislice CT urography has not yet been determined and results are preliminary, early indications suggest that this examination can detect even subtle benign and malignant urothelial abnormalities and that it has the potential to completely replace excretory urography within the next several years. An important limitation of multislice CT urography is increased patient radiation exposure encountered when some of the more thorough recommended techniques are utilized.

On the Power of Abstract Interpretation

NASA Technical Reports Server (NTRS)

Reddy, Uday S.; Kamin, Samuel N.

1991-01-01

Increasingly sophisticated applications of static analysis place increased burden on the reliability of the analysis techniques. Often, the failure of the analysis technique to detect some information my mean that the time or space complexity of the generated code would be altered. Thus, it is important to precisely characterize the power of static analysis techniques. We follow the approach of Selur et. al. who studied the power of strictness analysis techniques. Their result can be summarized by saying 'strictness analysis is perfect up to variations in constants.' In other words, strictness analysis is as good as it could be, short of actually distinguishing between concrete values. We use this approach to characterize a broad class of analysis techniques based on abstract interpretation including, but not limited to, strictness analysis. For the first-order case, we consider abstract interpretations where the abstract domain for data values is totally ordered. This condition is satisfied by Mycroft's strictness analysis that of Sekar et. al. and Wadler's analysis of list-strictness. For such abstract interpretations, we show that the analysis is complete in the sense that, short of actually distinguishing between concrete values with the same abstraction, it gives the best possible information. We further generalize these results to typed lambda calculus with pairs and higher-order functions. Note that products and function spaces over totally ordered domains are not totally ordered. In fact, the notion of completeness used in the first-order case fails if product domains or function spaces are added. We formulate a weaker notion of completeness based on observability of values. Two values (including pairs and functions) are considered indistinguishable if their observable components are indistinguishable. We show that abstract interpretation of typed lambda calculus programs is complete up to this notion of indistinguishability. We use denotationally-oriented arguments instead of the detailed operational arguments used by Selur et. al.. Hence, our proofs are much simpler. They should be useful for further future improvements.

Feasibility and effectiveness of an evidence-based asthma service in Australian community pharmacies: a pragmatic cluster randomized trial.

PubMed

Armour, Carol L; Reddel, Helen K; LeMay, Kate S; Saini, Bandana; Smith, Lorraine D; Bosnic-Anticevich, Sinthia Z; Song, Yun Ju Christine; Alles, M Chehani; Burton, Deborah L; Emmerton, Lynne; Stewart, Kay; Krass, Ines

2013-04-01

To test the feasibility, effectiveness, and sustainability of a pharmacy asthma service in primary care. A pragmatic cluster randomized trial in community pharmacies in four Australian states/territories in 2009. Specially trained pharmacists were randomized to deliver an asthma service in two groups, providing three versus four consultations over 6 months. People with poorly controlled asthma or no recent asthma review were included. Follow-up for 12 months after service completion occurred in 30% of randomly selected completing patients. Outcomes included change in asthma control (poor and fair/good) and Asthma Control Questionnaire (ACQ) score, inhaler technique, quality of life, perceived control, adherence, asthma knowledge, and asthma action plan ownership. Ninety-six pharmacists enrolled 570 patients, with 398 (70%) completing. Asthma control significantly improved with both the three- and four-visit service, with no significant difference between groups (good/fair control 29% and 21% at baseline, 61% and 59% at end, p = .791). Significant improvements were also evident in the ACQ (mean change 0.56), inhaler technique (17-33% correct baseline, 57-72% end), asthma action plan ownership (19% baseline, 56% end), quality of life, adherence, perceived control, and asthma knowledge, with no significant difference between groups for any variable. Outcomes were sustained at 12 months post-service. The pharmacy asthma service delivered clinically important improvements in both a three-visit and four-visit service. Pharmacists were able to recruit and deliver the service with minimal intervention, suggesting it is practical to implement in practice. The three-visit service would be feasible and effective to implement, with a review at 12 months.

Chronic Achilles tendinopathy: a case study of treatment incorporating active and passive tissue warm-up, Graston Technique®, ART®, eccentric exercise, and cryotherapy

PubMed Central

Miners, Andrew L.; Bougie, Tracy L.

2011-01-01

Objective To describe the subjective pain and functional improvements of a patient with chronic Achilles tendinopathy following a treatment plan incorporating active and passive tissue warm-up, followed respectively by soft tissue mobilization utilizing both Graston Technique® and Active Release Techniques®, eccentric exercise, and static stretching in combination with cryotherapy. Background The primary characterization of chronic Achilles tendinopathy is gradual onset of pain and dysfunction focused in one or both Achilles tendons arising secondary to a history of repetitive use or excessive overload. Intervention and Outcome Conservative treatment is commonly the initial strategy for patient management. Tissue heating, soft tissue mobilization, eccentric training, and static stretching with cryotherapy were implemented to reduce pain and improve function. Summary A specific protocol of heat, soft tissue mobilization, eccentric exercise, stretching, and cryotherapy appeared to facilitate a rapid and complete recovery from chronic Achilles tendinopathy. PMID:22131563

Novel technique to treat melasma in Chinese: The combination of 2940-nm fractional Er:YAG and 1064-nm Q-switched Nd:YAG laser.

PubMed

Tian, Wei Cheng Brian Anthony

2016-01-01

Melasma is one of the most common pigmented lesions in Chinese women. Although topical therapies are the mainstay treatment, lasers are being used increasingly to treat pigmented lesions. Laser treatment of melasma is however still controversial. This is because lasers have not been able to produce complete clearance of melasma and recurrence rates are high. Laser treatments also cause complications such as hypopigmentation and post-inflammatory hyperpigmentation. In this article, we report on a novel technique using a combination of fractional 2940-nm Er:YAG and 1064-nm Q-switched Nd:YAG lasers. We achieved a rapid improvement in two cases of melasma in Chinese type III skin. The improvement was seen rapidly within a month of treatment. Follow-up at 6 months showed sustained results with no complications. This novel technique is able to safely confer excellent and sustained clearance within a short treatment time.

Precision technique for trimming dies using a magnification device.

PubMed

Beck, D B

1980-05-01

This article described a technique for trimming a die under magnification. However, the microscope is also useful for checking (1) margins of wax patterns for completeness, (2) the internal surfaces of castings for imperfections, bubbles, or retained investment particles which could prevent proper seating of the castings on the dies, (3) for cracks or contamination in dental porcelain as well as porcelain flash on margins; and (4) precision attachment operation after casting or soldering procedures. Attention to detail in these laboratory procedures greatly improves the final fit of dental castings and saves subsequent chairside adjustments and remakes.

Laparoscopic (endoscopic) radical prostatectomy: techniques and results

NASA Astrophysics Data System (ADS)

Nelius, Thomas; de Riese, Werner T. W.; Reiher, Frank; Lindenmeir, Tobias; Filleur, Stephanie; Allhoff, Ernst P.

2005-04-01

Laparoscopic radical prostatectomy (LRP) is a relatively new technique for treating organ-confined prostate cancer. Recent progress of laparoscopic/endoscopic techniques allow to perform these complex oncological procedure. Since the first description of LRP in the early 1990s the technique has undergone significant technical modifications. Two operation routes were mainly used: the transperitoneal LRP and the extraperitoneal endoscopic radical prostatectomy (EERPE). Here we review the surgical techniques of both operation routes, and highlight results, outcome and complications. The transperitoneal LRP and the EERPE can be used successfully and reproducibly, giving results comparable with those from the open retropubic procedure. Despite many advantages, transperitoneal LRP is associated with potential intraperitoneal complications. The technical improvements of the EERPE completely obviates these complications. The available data are encouraging and promising, but long-term oncological results will define the definitive role of these new techniques. We truly believe that minimally invasive surgery in treating localized prostate cancer has a bright future and that these techniques will continue to be developed.

Improving post-stroke cognitive and behavioral abnormalities by using virtual reality: A case report on a novel use of nirvana.

PubMed

De Luca, Rosaria; Torrisi, Michele; Piccolo, Adriana; Bonfiglio, Giovanni; Tomasello, Provvidenza; Naro, Antonino; Calabrò, Rocco Salvatore

2017-10-11

Cognitive impairment, as well as mood and anxiety disorders, occur frequently in patients following stroke. Aim of this study was to evaluate the effects of a combined rehabilitative treatment using conventional relaxation and respiratory techniques, in a specific rehabilitative virtual environment (by using Bts-Nirvana). A 58-year-old woman, affected by hemorrhagic stroke, underwent two different rehabilitation trainings, including either standard relaxation techniques alone in a common clinical setting or the same psychological approach in a semi-immersive virtual environment with an augmented sensorial (audio-video) and motor feedback (sensory motor-interaction). We evaluated the patient's cognitive and psychological profile before and after the two different trainings, by using a specific psychometric battery, aimed to assess cognitive status, attention processes and to estimate the presence of mood alterations, anxiety and coping strategies. Only at the end of the combined approach, we observed a significant improvement in attention and memory functions, with a nearly complete relief of anxiety symptoms and an improvement in coping strategies. Relaxation and respiratory techniques in a semi-immersive virtual reality environment, using Bts-Nirvana, may be a promising tool in improving attention process, coping strategies, and anxiety in individuals with neurological disorders, including stroke.

Comparison of two nasoalveolar molding techniques in unilateral complete cleft lip patients: a randomized, prospective, single-blind trial to compare nasal outcomes.

PubMed

Chang, Chun-Shin; Wallace, Christopher Glenn; Pai, Betty Chien-Jung; Chiu, Yu-Ting; Hsieh, Yuh-Jia; Chen, I-Ju; Liao, Yu-Fang; Liou, Eric Jen-Wein; Chen, Philip Kuo-Ting

2014-08-01

Nasoalveolar molding became increasingly popular in the 1990s as a means of easing surgery and improving nasal outcomes for cleft lip repairs. In the late 1990s, three orthodontists from our center underwent nasoalveolar molding training: two at the Rush Craniofacial Center, in Chicago; and one at New York University Craniofacial Center. They brought two different nasoalveolar molding techniques back to Chang Gung Craniofacial Center: the modified Figueroa and the modified Grayson techniques. Outcomes following use of these techniques have not previously been compared prospectively. Between May of 2010 and March of 2013, a randomized, prospective, single-blind trial was conducted to compare the number of clinical visits, total costs, complications, and nasal symmetry between the two nasoalveolar molding techniques in 30 patients with unilateral complete cleft lip. There were no differences between nasoalveolar molding techniques in the number of clinical visits, total costs, nostril height, or nostril area ratio. Preoperatively but after nasoalveolar molding, the nostril width ratio was wider for the Figueroa group than for the Grayson group. Six months after surgical correction, there were no differences in nostril height, nostril width, nasal sill height, or nostril area ratio between nasoalveolar molding methods. Alveolar ulceration occurred more frequently in the Grayson group. The modified Grayson technique reduced nostril width more efficiently, but alveolar ulceration was more frequent and no differences in nostril width were found following surgery. Overall, the two nasoalveolar molding techniques produced similar nasal outcomes. Therapeutic, II.

Single-row, double-row, and transosseous equivalent techniques for isolated supraspinatus tendon tears with minimal atrophy: A retrospective comparative outcome and radiographic analysis at minimum 2-year followup

PubMed Central

McCormick, Frank; Gupta, Anil; Bruce, Ben; Harris, Josh; Abrams, Geoff; Wilson, Hillary; Hussey, Kristen; Cole, Brian J.

2014-01-01

Purpose: The purpose of this study was to measure and compare the subjective, objective, and radiographic healing outcomes of single-row (SR), double-row (DR), and transosseous equivalent (TOE) suture techniques for arthroscopic rotator cuff repair. Materials and Methods: A retrospective comparative analysis of arthroscopic rotator cuff repairs by one surgeon from 2004 to 2010 at minimum 2-year followup was performed. Cohorts were matched for age, sex, and tear size. Subjective outcome variables included ASES, Constant, SST, UCLA, and SF-12 scores. Objective outcome variables included strength, active range of motion (ROM). Radiographic healing was assessed by magnetic resonance imaging (MRI). Statistical analysis was performed using analysis of variance (ANOVA), Mann — Whitney and Kruskal — Wallis tests with significance, and the Fisher exact probability test <0.05. Results: Sixty-three patients completed the study requirements (20 SR, 21 DR, 22 TOE). There was a clinically and statistically significant improvement in outcomes with all repair techniques (ASES mean improvement P = <0.0001). The mean final ASES scores were: SR 83; (SD 21.4); DR 87 (SD 18.2); TOE 87 (SD 13.2); (P = 0.73). There was a statistically significant improvement in strength for each repair technique (P < 0.001). There was no significant difference between techniques across all secondary outcome assessments: ASES improvement, Constant, SST, UCLA, SF-12, ROM, Strength, and MRI re-tear rates. There was a decrease in re-tear rates from single row (22%) to double-row (18%) to transosseous equivalent (11%); however, this difference was not statistically significant (P = 0.6). Conclusions: Compared to preoperatively, arthroscopic rotator cuff repair, using SR, DR, or TOE techniques, yielded a clinically and statistically significant improvement in subjective and objective outcomes at a minimum 2-year follow-up. Level of Evidence: Therapeutic level 3. PMID:24926159

Endoscopic resection of subepithelial tumors.

PubMed

Schmidt, Arthur; Bauder, Markus; Riecken, Bettina; Caca, Karel

2014-12-16

Management of subepithelial tumors (SETs) remains challenging. Endoscopic ultrasound (EUS) has improved differential diagnosis of these tumors but a definitive diagnosis on EUS findings alone can be achieved in the minority of cases. Complete endoscopic resection may provide a reasonable approach for tissue acquisition and may also be therapeutic in case of malignant lesions. Small SET restricted to the submucosa can be removed with established basic resection techniques. However, resection of SET arising from deeper layers of the gastrointestinal wall requires advanced endoscopic methods and harbours the risk of perforation. Innovative techniques such as submucosal tunneling and full thickness resection have expanded the frontiers of endoscopic therapy in the past years. This review will give an overview about endoscopic resection techniques of SET with a focus on novel methods.

Center of pressure based segment inertial parameters validation

PubMed Central

Rezzoug, Nasser; Gorce, Philippe; Isableu, Brice; Venture, Gentiane

2017-01-01

By proposing efficient methods for estimating Body Segment Inertial Parameters’ (BSIP) estimation and validating them with a force plate, it is possible to improve the inverse dynamic computations that are necessary in multiple research areas. Until today a variety of studies have been conducted to improve BSIP estimation but to our knowledge a real validation has never been completely successful. In this paper, we propose a validation method using both kinematic and kinetic parameters (contact forces) gathered from optical motion capture system and a force plate respectively. To compare BSIPs, we used the measured contact forces (Force plate) as the ground truth, and reconstructed the displacements of the Center of Pressure (COP) using inverse dynamics from two different estimation techniques. Only minor differences were seen when comparing the estimated segment masses. Their influence on the COP computation however is large and the results show very distinguishable patterns of the COP movements. Improving BSIP techniques is crucial and deviation from the estimations can actually result in large errors. This method could be used as a tool to validate BSIP estimation techniques. An advantage of this approach is that it facilitates the comparison between BSIP estimation methods and more specifically it shows the accuracy of those parameters. PMID:28662090

Femtosecond-assisted keratopigmentation double tunnel technique in the management of a case of Urrets-Zavalia syndrome.

PubMed

Alio, Jorge L; Rodriguez, Alejandra E; Toffaha, Bader T; El Aswad, A

2012-09-01

To describe the successful use of a double intrastromal tunnel femtosecond-assisted keratopigmentation technique to manage a case of unilateral Urrets-Zavalia syndrome. A 33-year-old man was referred with a history of trauma in his right eye due to a labor-related accident. Because of myopic anisometropia, he had been previously implanted with an angle-supported phakic intraocular lens. The patient presented iris atrophy and a fixed dilated pupil. He complained of severe and incapacitating photophobia, glare, and decreased vision. To obtain a complete iris replica, the surgery involved creation of double keratopigmented intrastromal tunnels using femtosecond laser and micronized mineral pigments. The deepest layer was stained black first and then the superficial layer was stained with a contoured greenish blue-gray color, which matched the contralateral eye. In the immediate postoperative period, the patient reported a complete elimination of photophobia associated with the corrected distance visual acuity improvement. A very adequate cosmetic outcome was also achieved. Stability was observed during the 12-month follow-up. A femtosecond-assisted keratopigmentation technique using 2 pigmented intrastromal tunnels to achieve an intracorneal pigmented replica of the iris was effective in improving the patient's severe visual function disability and cosmetic appearance. To the best of our knowledge, this is the first report of severe visual function disability caused by atrophic iris and a fixed dilated pupil treated with double intrastromal layers of keratopigmentation by means of femtosecond-created tunnels.

Polyfibroblast: A Self-Healing and Galvanic Protection Additive

DTIC Science & Technology

2011-09-27

TESTING 8 3.5 ADHESION OF SPRAY COATINGS WITH MICROCAPSULES 8 3.6 CONTROLLING METAL COMPOSITION 9 3.7 SHEAR STRESS TESTING 9 Polyfibroblast...observed self-healing in real time using electrochemical impedance spectroscopy, we now show through this same technique the importance of the microcapsules ...OTS rich microcapsules have an improved shelf-life in comparison to polyurethane resin-filled microcapsules . Salt spray measurements, now completed

FT. Sam 91 Whiskey Combat Medic Medical Simulation Training Quantitative Integration Enhancement Program

DTIC Science & Technology

2011-07-01

joined the project team in the statistical and research coordination role. Dr. Collin is an employee at the University of Pittsburgh. A successful...3. Submit to Ft. Detrick Completed Milestone: Statistical analysis planning 1. Review planned data metrics and data gathering tools...approach to performance assessment for continuous quality improvement.  Analyzing data with modern statistical techniques to determine the

Building Change Detection from LIDAR Point Cloud Data Based on Connected Component Analysis

NASA Astrophysics Data System (ADS)

Awrangjeb, M.; Fraser, C. S.; Lu, G.

2015-08-01

Building data are one of the important data types in a topographic database. Building change detection after a period of time is necessary for many applications, such as identification of informal settlements. Based on the detected changes, the database has to be updated to ensure its usefulness. This paper proposes an improved building detection technique, which is a prerequisite for many building change detection techniques. The improved technique examines the gap between neighbouring buildings in the building mask in order to avoid under segmentation errors. Then, a new building change detection technique from LIDAR point cloud data is proposed. Buildings which are totally new or demolished are directly added to the change detection output. However, for demolished or extended building parts, a connected component analysis algorithm is applied and for each connected component its area, width and height are estimated in order to ascertain if it can be considered as a demolished or new building part. Finally, a graphical user interface (GUI) has been developed to update detected changes to the existing building map. Experimental results show that the improved building detection technique can offer not only higher performance in terms of completeness and correctness, but also a lower number of undersegmentation errors as compared to its original counterpart. The proposed change detection technique produces no omission errors and thus it can be exploited for enhanced automated building information updating within a topographic database. Using the developed GUI, the user can quickly examine each suggested change and indicate his/her decision with a minimum number of mouse clicks.

The point-touch technique for botulinum toxin injection in adductor spasmodic dysphonia: quality of life assessment.

PubMed

Morzaria, S; Damrose, E J

2011-07-01

Botulinum toxin injection under electromyographic guidance is the 'gold standard' for adductor spasmodic dysphonia treatment. The point-touch technique, an alternative injection method which relies on anatomical landmarks, is cheaper, quicker and more accessible, but has not yet gained widespread acceptance due to concerns about patient satisfaction. To assess swallowing and voice-related quality of life following point-touch botulinum toxin injection in adductor spasmodic dysphonia patients. Stanford University Voice and Swallowing Center. Prospective case series (evidence level four). Consecutive adductor spasmodic dysphonia patients with a stable botulinum toxin dose-response relationship were recruited prospectively. The Eating Assessment Tool and Voice-Related Quality of Life questionnaires were completed pre-treatment and at 10 and 30 per cent completion of the injection cycle, respectively. Thirty-seven patients completed follow up. The mean total botulinum toxin dose was 0.88 units. Pre-treatment Voice-Related Quality of Life questionnaire results reflected the burden of disease. Post-treatment Eating Assessment Tool and Voice-Related Quality of Life questionnaire results were collected at 2.53 and 7.84 weeks, respectively; the former showed an increase in dysphagia, albeit statistically insignificant, while the latter showed significantly improved scores (both domain and total). The point-touch technique is a viable alternative for botulinum toxin injection in the treatment of adductor spasmodic dysphonia.

The effect of double-row fixation on initial repair strength in rotator cuff repair: a biomechanical study.

PubMed

Meier, Steven W; Meier, Jeffrey D

2006-11-01

The purpose of this study was to compare the initial mechanical strength of 3 rotator cuff repair techniques. A total of 30 fresh-frozen cadaveric shoulders were prepared, and full-thickness supraspinatus tears were created. Specimens were randomized and placed into 3 groups: (1) transosseous suture technique (group I: TOS, n = 10, 6F/4M), (2) single-row suture anchor fixation (group II: SRSA, n = 10, 6F/4M), and (3) double-row suture anchor fixation (group III: DRSA, n = 10, 6F/4M). Each specimen underwent cyclic load testing from 5 N to 180 N at a rate of 33 mm/sec. The test was stopped when complete failure (repair site gap of 10 mm) or a total of 5,000 cycles was attained. Group I (TOS) failed at an average of 75.3 +/- 22.49 cycles, and group II (SRSA) at an average of 798.3 +/- 73.28 cycles; group III (DRSA) had no failures because all samples were stopped when 5,000 cycles had been completed. Fixation strength of the DRSA technique proved to be significantly greater than that of SRSA (P < .001), and both suture anchor groups were significantly stronger than the TOS group (P < .001). Suture anchor repairs were significantly stronger than transosseous repairs. Furthermore, double-row suture anchor fixation was significantly stronger than was single-row repair. Therefore, double-row fixation may be superior to other techniques in that it provides a substantially stronger repair that could lead to improved biologic healing. A high incidence of incomplete healing occurs in rotator cuff repair. Use of double-row fixation may help the clinician to address some deficiencies in current methods by increasing the strength of the repair, potentially leading to improved healing rates.

Applying Standard Independent Verification and Validation (IVV) Techniques Within an Agile Framework: Is There a Compatibility Issue?

NASA Technical Reports Server (NTRS)

Dabney, James B.; Arthur, James Douglas

2017-01-01

Agile methods have gained wide acceptance over the past several years, to the point that they are now a standard management and execution approach for small-scale software development projects. While conventional Agile methods are not generally applicable to large multi-year and mission-critical systems, Agile hybrids are now being developed (such as SAFe) to exploit the productivity improvements of Agile while retaining the necessary process rigor and coordination needs of these projects. From the perspective of Independent Verification and Validation (IVV), however, the adoption of these hybrid Agile frameworks is becoming somewhat problematic. Hence, we find it prudent to question the compatibility of conventional IVV techniques with (hybrid) Agile practices.This paper documents our investigation of (a) relevant literature, (b) the modification and adoption of Agile frameworks to accommodate the development of large scale, mission critical systems, and (c) the compatibility of standard IVV techniques within hybrid Agile development frameworks. Specific to the latter, we found that the IVV methods employed within a hybrid Agile process can be divided into three groups: (1) early lifecycle IVV techniques that are fully compatible with the hybrid lifecycles, (2) IVV techniques that focus on tracing requirements, test objectives, etc. are somewhat incompatible, but can be tailored with a modest effort, and (3) IVV techniques involving an assessment requiring artifact completeness that are simply not compatible with hybrid Agile processes, e.g., those that assume complete requirement specification early in the development lifecycle.

The Basic Surgical Skills Course in Sub-Saharan Africa: An Observational Study of Effectiveness.

PubMed

Fergusson, Stuart J; Sedgwick, David M; Ntakiyiruta, Georges; Ntirenganya, Faustin

2018-04-01

The Basic Surgical Skills (BSS) course is a common component of postgraduate surgical training programmes in sub-Saharan Africa, but was originally designed in a UK context, and its efficacy and relevance have not been formally assessed in Africa. An observational study was carried out during a BSS course delivered to early-stage surgical trainees from Rwanda and the Democratic Republic of the Congo. Technical skill in a basic wound closure task was assessed in a formal Objective Structured Assessment of Technical Skills (OSAT) before and after course completion. Participants completed a pre-course questionnaire documenting existing surgical experience and self-perceived confidence levels in surgical skills which were to be taught during the course. Participants repeated confidence ratings and completed course evaluation following course delivery. A cohort of 17 participants had completed a pre-course median of 150 Caesarean sections as primary operator. Performance on the OSAT improved from a mean of 10.5/17 pre-course to 14.2/17 post-course (mean of paired differences 3.7, p < 0.001). Improvements were seen in 15/17 components of wound closure. Pre-course, only 47% of candidates were forming hand-tied knots correctly and 38% were appropriately crossing hands with each throw, improving to 88 and 76%, respectively, following the course (p = 0.01 for both components). Confidence levels improved significantly in all technical skills taught, and the course was assessed as highly relevant by trainees. The Basic Surgical Skills course is effective in improving the basic surgical technique of surgical trainees from sub-Saharan Africa and their confidence in key technical skills.

Double transosseous pull out suture technique for transection of posterior horn of medial meniscus.

PubMed

Ahn, Jin Hwan; Wang, Joon Ho; Lim, Hong Chul; Bae, Ji Hoon; Park, Joon Soo; Yoo, Jae Chul; Shyam, Ashok Kumar

2009-03-01

Transection injury (complete radial tear, root tear) in the posterior horn of medial meniscus will lead to loss of hoop strain, extrusion of the meniscus and early degenerative changes. The posterior horn of medial meniscus is amenable to repair due to its good blood supply and repair is the procedure of choice for these injuries. In cases of transection of the medial meniscus posterior horn, the meniscus can be repaired by a pull out suture technique using trans-septal portal. The single transosseous pull out suturing technique is a point fixation technique with limited contact area having low and inhomogeneous contact pressure. This article describes a double transosseous pull out suture technique using trans-septal portal for the repair of transection of posterior horn of medial meniscus. Use of double transosseous technique provides more secure fixation, more homogeneous and wider contact pressure area between meniscus and the bone, improving the healing potential of the repair.

Mindfulness training improves working memory capacity and GRE performance while reducing mind wandering.

PubMed

Mrazek, Michael D; Franklin, Michael S; Phillips, Dawa Tarchin; Baird, Benjamin; Schooler, Jonathan W

2013-05-01

Given that the ability to attend to a task without distraction underlies performance in a wide variety of contexts, training one's ability to stay on task should result in a similarly broad enhancement of performance. In a randomized controlled investigation, we examined whether a 2-week mindfulness-training course would decrease mind wandering and improve cognitive performance. Mindfulness training improved both GRE reading-comprehension scores and working memory capacity while simultaneously reducing the occurrence of distracting thoughts during completion of the GRE and the measure of working memory. Improvements in performance following mindfulness training were mediated by reduced mind wandering among participants who were prone to distraction at pretesting. Our results suggest that cultivating mindfulness is an effective and efficient technique for improving cognitive function, with wide-reaching consequences.

Memory Flexibility training (MemFlex) to reduce depressive symptomatology in individuals with major depressive disorder: study protocol for a randomised controlled trial.

PubMed

Hitchcock, Caitlin; Hammond, Emily; Rees, Catrin; Panesar, Inderpal; Watson, Peter; Werner-Seidler, Aliza; Dalgleish, Tim

2015-11-03

Major depressive disorder (MDD) is associated with chronic biases in the allocation of attention and recollection of personal memories. Impaired flexibility in attention and autobiographical memory retrieval is seen to both maintain current symptoms and predict future depression. Development of innovative interventions to reduce maladaptive cognitive patterns and improve cognitive flexibility in the domain of memory may therefore advance current treatment approaches for depression. Memory specificity training and cognitive bias modification techniques have both shown some promise in improving cognitive flexibility. Here we outline plans for a trial of an innovative memory flexibility training programme, MemFlex, which advances current training techniques with the aim of improving flexibility of autobiographical memory retrieval. This trial seeks to estimate the efficacy of MemFlex, provide data on feasibility, and begin to explore mechanisms of change. We plan a single-blind, randomised, controlled, patient-level trial in which 50 individuals with MDD will complete either psychoeducation (n = 25) or MemFlex (n = 25). After completing pre-treatment measures and an orientation session, participants complete eight workbook-based sessions at home. Participants will then be assessed at post-treatment and at 3 month follow-up. The co-primary outcomes are depressive symptoms and diagnostic status at 3 month follow-up. The secondary outcomes are memory flexibility at post-treatment and number of depression free days at 3 month follow-up. Other process outcomes and mediators of any treatment effects will also be explored. This trial will establish the efficacy of MemFlex in improving memory flexibility, and reducing depressive symptoms. Any effects on process measures related to relapse may also indicate whether MemFlex may be helpful in reducing vulnerability to future depressive episodes. The low-intensity and workbook-based format of the programme may improve access to psychological therapies, and, if encouraging, the results of this study will provide a platform for later-phase trials. NCT02371291 (ClinicalTrials.gov), registered 9 February 2015.

A Randomized Control Trial of Cardiopulmonary Feedback Devices and Their Impact on Infant Chest Compression Quality: A Simulation Study.

PubMed

Austin, Andrea L; Spalding, Carmen N; Landa, Katrina N; Myer, Brian R; Donald, Cure; Smith, Jason E; Platt, Gerald; King, Heather C

2017-10-27

In effort to improve chest compression quality among health care providers, numerous feedback devices have been developed. Few studies, however, have focused on the use of cardiopulmonary resuscitation feedback devices for infants and children. This study evaluated the quality of chest compressions with standard team-leader coaching, a metronome (MetroTimer by ONYX Apps), and visual feedback (SkillGuide Cardiopulmonary Feedback Device) during simulated infant cardiopulmonary resuscitation. Seventy voluntary health care providers who had recently completed Pediatric Advanced Life Support or Basic Life Support courses were randomized to perform simulated infant cardiopulmonary resuscitation into 1 of 3 groups: team-leader coaching alone (control), coaching plus metronome, or coaching plus SkillGuide for 2 minutes continuously. Rate, depth, and frequency of complete recoil during cardiopulmonary resuscitation were recorded by the Laerdal SimPad device for each participant. American Heart Association-approved compression techniques were randomized to either 2-finger or encircling thumbs. The metronome was associated with more ideal compression rate than visual feedback or coaching alone (104/min vs 112/min and 113/min; P = 0.003, 0.019). Visual feedback was associated with more ideal depth than auditory (41 mm vs 38.9; P = 0.03). There were no significant differences in complete recoil between groups. Secondary outcomes of compression technique revealed a difference of 1 mm. Subgroup analysis of male versus female showed no difference in mean number of compressions (221.76 vs 219.79; P = 0.72), mean compression depth (40.47 vs 39.25; P = 0.09), or rate of complete release (70.27% vs 64.96%; P = 0.54). In the adult literature, feedback devices often show an increase in quality of chest compressions. Although more studies are needed, this study did not demonstrate a clinically significant improvement in chest compressions with the addition of a metronome or visual feedback device, no clinically significant difference in Pediatric Advanced Life Support-approved compression technique, and no difference between compression quality between genders.

A novel simulation model for minimally invasive spine surgery.

PubMed

Walker, James B; Perkins, Eddie; Harkey, H Louis

2009-12-01

Minimally invasive spine surgery (MISS) is among the fastest growing technologies in general neurosurgical practice. In addition, great demand exists to teach these skills to neurosurgery residents. With newly enforced work hour restrictions, opportunities to acquire these skills are limited, necessitating development of alternative strategies of education. We describe a novel simulation model for MISS supplemented by resident self-assessment analysis and evaluation. The simulator was constructed using a nontransparent Plexiglas frame supplemented with a modified halo frame on which to affix spine specimens. Interchangeable copper tubing was affixed to a 360-degree pivot system to replicate a working portal. Deer skulls and spines were then collected and prepared accordingly. Laboratory exercises were based on the resident's level of training with emphasis on proper drilling techniques. Eight neurosurgery residents were asked to complete the exercises and complete a self-assessment survey regarding their competence level on a scale of 0 to 5, both before and after completing the skill sets. Additionally, they were asked to complete an exit survey that was used to assess the simulation exercises. All exercises were completed successfully with the exception of placing 2 separate pedicle screws through the same portal, which posed difficulty on some specimens because of the of lack of lordosis of the specimens, leading to unfavorable trajectories using a free-hand technique. With regard to the resident self-assessment analysis, the mean confidence rating for performing an MISS laminectomy improved by a difference of 1.25 points (n = 8; 95% confidence interval, 0.66-1.84; P = 0.0015), from 2.50 to 3.75 before and after simulation exercises, respectively, and reached statistical significance. For the senior-level residents, the mean confidence rating for performing MISS placement of pedicle screws using a free-hand technique improved by a difference of 1.00 (n = 3; 95% confidence interval, -1.48-3.48; P = 0.225), from 3.33 to 4.33 before and after simulation exercises, respectively. Results of the exit survey were encouraging. The MISS simulator is a feasible, inexpensive, and reproducible adjunct to neurosurgery resident training and provides a new teaching method for spine surgery. Further investigation of this technology is warranted, although multicenter, randomized, controlled trials assessing its validity may not be practical because of ethical constraints with regard to patient safety.

Flow control techniques for Onyx embolization of intracranial dural arteriovenous fistulae.

PubMed

Shi, Zhong-Song; Loh, Yince; Gonzalez, Nestor; Tateshima, Satoshi; Feng, Lei; Jahan, Reza; Duckwiler, Gary; Viñuela, Fernando

2013-07-01

Experience of flow control techniques during endovascular treatment of intracranial dural arteriovenous fistulas (DAVFs) using the Onyx liquid embolic system is reported, with an emphasis on high flow shunts. Data were evaluated in patients with DAVFs treated endovascularly with Onyx. Adjunctive techniques with coils, acrylics and balloon assistance were utilized to reduce the rate of flow with transarterial and transvenous approaches. The following types of adjunctive techniques were used in 58 patients who underwent a total of 84 embolization sessions with Onyx: transvenous coiling with transvenous or transarterial Onyx embolization in 36 patients, transarterial coiling with transarterial Onyx embolization in eight patients, arterial or venous balloon assisted technique with transarterial or transvenous Onyx embolization in 11 patients, transarterial high concentration acrylics with transarterial Onyx embolization in one patient and staged transarterial or transvenous coiling and Onyx embolization in two patients. Complete obliteration of the fistulae was achieved in 41 patients (70.7%) and 27 patients (65.9%) with high flow fistulae after endovascular treatment alone. Periprocedural complications were encountered in 16 patients, and 13 complications were associated with the adjunctive techniques. There were four neurologic and two non-neurologic clinical sequelae. Distal Onyx migration occurred in four, microcatheter retention in three and cranial neuropathy in three patients. There was one instance each of cerebellar hemorrhage, thromboembolism, coil stretching and retention, and dissection. 56 survivors experienced complete resolution or significant improvement of their symptoms on follow-up. Flow control techniques are safe and effective adjunctive methods in primary endovascular Onyx embolization of high flow DAVFs.

Impact of Next Generation Sequencing Techniques in Food Microbiology

PubMed Central

Mayo, Baltasar; Rachid, Caio T. C. C; Alegría, Ángel; Leite, Analy M. O; Peixoto, Raquel S; Delgado, Susana

2014-01-01

Understanding the Maxam-Gilbert and Sanger sequencing as the first generation, in recent years there has been an explosion of newly-developed sequencing strategies, which are usually referred to as next generation sequencing (NGS) techniques. NGS techniques have high-throughputs and produce thousands or even millions of sequences at the same time. These sequences allow for the accurate identification of microbial taxa, including uncultivable organisms and those present in small numbers. In specific applications, NGS provides a complete inventory of all microbial operons and genes present or being expressed under different study conditions. NGS techniques are revolutionizing the field of microbial ecology and have recently been used to examine several food ecosystems. After a short introduction to the most common NGS systems and platforms, this review addresses how NGS techniques have been employed in the study of food microbiota and food fermentations, and discusses their limits and perspectives. The most important findings are reviewed, including those made in the study of the microbiota of milk, fermented dairy products, and plant-, meat- and fish-derived fermented foods. The knowledge that can be gained on microbial diversity, population structure and population dynamics via the use of these technologies could be vital in improving the monitoring and manipulation of foods and fermented food products. They should also improve their safety. PMID:25132799

An intelligent clinical decision support system for patient-specific predictions to improve cervical intraepithelial neoplasia detection.

PubMed

Bountris, Panagiotis; Haritou, Maria; Pouliakis, Abraham; Margari, Niki; Kyrgiou, Maria; Spathis, Aris; Pappas, Asimakis; Panayiotides, Ioannis; Paraskevaidis, Evangelos A; Karakitsos, Petros; Koutsouris, Dimitrios-Dionyssios

2014-01-01

Nowadays, there are molecular biology techniques providing information related to cervical cancer and its cause: the human Papillomavirus (HPV), including DNA microarrays identifying HPV subtypes, mRNA techniques such as nucleic acid based amplification or flow cytometry identifying E6/E7 oncogenes, and immunocytochemistry techniques such as overexpression of p16. Each one of these techniques has its own performance, limitations and advantages, thus a combinatorial approach via computational intelligence methods could exploit the benefits of each method and produce more accurate results. In this article we propose a clinical decision support system (CDSS), composed by artificial neural networks, intelligently combining the results of classic and ancillary techniques for diagnostic accuracy improvement. We evaluated this method on 740 cases with complete series of cytological assessment, molecular tests, and colposcopy examination. The CDSS demonstrated high sensitivity (89.4%), high specificity (97.1%), high positive predictive value (89.4%), and high negative predictive value (97.1%), for detecting cervical intraepithelial neoplasia grade 2 or worse (CIN2+). In comparison to the tests involved in this study and their combinations, the CDSS produced the most balanced results in terms of sensitivity, specificity, PPV, and NPV. The proposed system may reduce the referral rate for colposcopy and guide personalised management and therapeutic interventions.

An Intelligent Clinical Decision Support System for Patient-Specific Predictions to Improve Cervical Intraepithelial Neoplasia Detection

PubMed Central

Bountris, Panagiotis; Haritou, Maria; Pouliakis, Abraham; Margari, Niki; Kyrgiou, Maria; Spathis, Aris; Pappas, Asimakis; Panayiotides, Ioannis; Paraskevaidis, Evangelos A.; Karakitsos, Petros; Koutsouris, Dimitrios-Dionyssios

2014-01-01

Nowadays, there are molecular biology techniques providing information related to cervical cancer and its cause: the human Papillomavirus (HPV), including DNA microarrays identifying HPV subtypes, mRNA techniques such as nucleic acid based amplification or flow cytometry identifying E6/E7 oncogenes, and immunocytochemistry techniques such as overexpression of p16. Each one of these techniques has its own performance, limitations and advantages, thus a combinatorial approach via computational intelligence methods could exploit the benefits of each method and produce more accurate results. In this article we propose a clinical decision support system (CDSS), composed by artificial neural networks, intelligently combining the results of classic and ancillary techniques for diagnostic accuracy improvement. We evaluated this method on 740 cases with complete series of cytological assessment, molecular tests, and colposcopy examination. The CDSS demonstrated high sensitivity (89.4%), high specificity (97.1%), high positive predictive value (89.4%), and high negative predictive value (97.1%), for detecting cervical intraepithelial neoplasia grade 2 or worse (CIN2+). In comparison to the tests involved in this study and their combinations, the CDSS produced the most balanced results in terms of sensitivity, specificity, PPV, and NPV. The proposed system may reduce the referral rate for colposcopy and guide personalised management and therapeutic interventions. PMID:24812614

Exploring the role of parent training in the treatment of childhood anxiety.

PubMed

Khanna, Muniya S; Kendall, Philip C

2009-10-01

Data from a randomized clinical trial comparing the relative efficacy of individual cognitive-behavioral therapy (ICBT), family CBT (FCBT), and a family-based education/support/attention control (FESA) condition were used to examine associations between in-session therapeutic techniques related to parent training (PT) and treatment outcomes. This study explored the extent to which therapists' use of PT techniques, specifically (a) parental anxiety management, (b) transfer of control from therapist to parent to child over child's coping, (c) communication skills training, and (d) contingency management training, contributed to treatment outcome in family-based CBT. Children (N = 53; 31 males; 7.8-13.8 years of age; M = 10.1 years, SD = 2.3; 85% Caucasian, 9% African American, 4% Asian, 2% "other" background) with a principal anxiety disorder completed 16 sessions of CBT with their parents. The relative contributions of PT components on treatment outcome were evaluated. As hypothesized, both transfer-of-control and parental anxiety management techniques significantly contributed to improvement on clinician and parent ratings of child global functioning within FCBT. PT did not significantly contribute to improvement on measures of child anxiety. These preliminary findings suggest that when FCBT is conducted for child anxiety, PT (i.e., transfer-of-control and parental anxiety management techniques) may contribute to improvements in the child's global functioning. (c) 2009 APA, all rights reserved.

An improved DPSM technique for modelling ultrasonic fields in cracked solids

NASA Astrophysics Data System (ADS)

Banerjee, Sourav; Kundu, Tribikram; Placko, Dominique

2007-04-01

In recent years Distributed Point Source Method (DPSM) is being used for modelling various ultrasonic, electrostatic and electromagnetic field modelling problems. In conventional DPSM several point sources are placed near the transducer face, interface and anomaly boundaries. The ultrasonic or the electromagnetic field at any point is computed by superimposing the contributions of different layers of point sources strategically placed. The conventional DPSM modelling technique is modified in this paper so that the contributions of the point sources in the shadow region can be removed from the calculations. For this purpose the conventional point sources that radiate in all directions are replaced by Controlled Space Radiation (CSR) sources. CSR sources can take care of the shadow region problem to some extent. Complete removal of the shadow region problem can be achieved by introducing artificial interfaces. Numerically synthesized fields obtained by the conventional DPSM technique that does not give any special consideration to the point sources in the shadow region and the proposed modified technique that nullifies the contributions of the point sources in the shadow region are compared. One application of this research can be found in the improved modelling of the real time ultrasonic non-destructive evaluation experiments.

Evaluation of the mining techniques in constructing a traditional Chinese-language nursing recording system.

PubMed

Liao, Pei-Hung; Chu, William; Chu, Woei-Chyn

2014-05-01

In 2009, the Department of Health, part of Taiwan's Executive Yuan, announced the advent of electronic medical records to reduce medical expenses and facilitate the international exchange of medical record information. An information technology platform for nursing records in medical institutions was then quickly established, which improved nursing information systems and electronic databases. The purpose of the present study was to explore the usability of the data mining techniques to enhance completeness and ensure consistency of nursing records in the database system.First, the study used a Chinese word-segmenting system on common and special terms often used by the nursing staff. We also used text-mining techniques to collect keywords and create a keyword lexicon. We then used an association rule and artificial neural network to measure the correlation and forecasting capability for keywords. Finally, nursing staff members were provided with an on-screen pop-up menu to use when establishing nursing records. Our study found that by using mining techniques we were able to create a powerful keyword lexicon and establish a forecasting model for nursing diagnoses, ensuring the consistency of nursing terminology and improving the nursing staff's work efficiency and productivity.

Complete Imageless solution for overlay front-end manufacturing

NASA Astrophysics Data System (ADS)

Herisson, David; LeCacheux, Virginie; Touchet, Mathieu; Vachellerie, Vincent; Lecarpentier, Laurent; Felten, Franck; Polli, Marco

2005-09-01

Imageless option of KLA-Tencor RDM system (Recipe Data Management) is a new method of recipe creation, using only the mask design to define alignment target and measurement parameters. This technique is potentially the easiest tool to improve recipe management of a large amount of products in logic fab. Overlay recipes are created without wafer, by using a synthetic image (copy of gds mask file) for alignment pattern and target design like shape (frame in frame) and size for the measurement. A complete gauge study on critical CMOS 90nm Gate level has been conducted to evaluate reliability and robustness of the imageless recipe. We show that Imageless limits drastically the number of templates used for recipe creation, and improves or maintains measurement capability compare to manual recipe creation (operator dependant). Imageless appears to be a suitable solution for high volume manufacturing, as shown by the results obtained on production lots.

A Project Management Approach to an ACPE Accreditation Self-study

PubMed Central

Iwanowicz, Susan L.; Bailie, George R.; Clarke, David W.; McGraw, Patrick S.

2007-01-01

In preparation for an on-site evaluation and accreditation by the American Council on Pharmaceutical Education (ACPE), the Albany College of Pharmacy employed project management techniques to complete a comprehensive self-study. A project lifecycle approach, including planning, production, and turnover phases, was used by the project's Self-Study Steering Committee. This approach, with minimal disruption to college operations, resulted in the completion of the self-study process on schedule. Throughout the project, the Steering Committee maintained a log of functions that either were executed successfully or in hindsight, could have been improved. To assess the effectiveness of the project management approach to the the self-study process, feedback was obtained from the College community through a poststudy survey. This feedback, coupled with the Steering Committee's data on possible improvements, form the basis for the lessons learned during this self-study process. PMID:17533432

A project management approach to an ACPE accreditation self-study.

PubMed

Dominelli, Angela; Iwanowicz, Susan L; Bailie, George R; Clarke, David W; McGraw, Patrick S

2007-04-15

In preparation for an on-site evaluation and accreditation by the American Council on Pharmaceutical Education (ACPE), the Albany College of Pharmacy employed project management techniques to complete a comprehensive self-study. A project lifecycle approach, including planning, production, and turnover phases, was used by the project's Self-Study Steering Committee. This approach, with minimal disruption to college operations, resulted in the completion of the self-study process on schedule. Throughout the project, the Steering Committee maintained a log of functions that either were executed successfully or in hindsight, could have been improved. To assess the effectiveness of the project management approach to the the self-study process, feedback was obtained from the College community through a poststudy survey. This feedback, coupled with the Steering Committee's data on possible improvements, form the basis for the lessons learned during this self-study process.

A collaborative approach to lean laboratory workstation design reduces wasted technologist travel.

PubMed

Yerian, Lisa M; Seestadt, Joseph A; Gomez, Erron R; Marchant, Kandice K

2012-08-01

Lean methodologies have been applied in many industries to reduce waste. We applied Lean techniques to redesign laboratory workstations with the aim of reducing the number of times employees must leave their workstations to complete their tasks. At baseline in 68 workflows (aggregates or sequence of process steps) studied, 251 (38%) of 664 tasks required workers to walk away from their workstations. After analysis and redesign, only 59 (9%) of the 664 tasks required technologists to leave their workstations to complete these tasks. On average, 3.4 travel events were removed for each workstation. Time studies in a single laboratory section demonstrated that workers spend 8 to 70 seconds in travel each time they step away from the workstation. The redesigned workstations will allow employees to spend less time travelling around the laboratory. Additional benefits include employee training in waste identification, improved overall laboratory layout, and identification of other process improvement opportunities in our laboratory.

DEVELOPMENT OF IMPROVED FABRICATION METHODS, PROCESS AND TECHNIQUES FOR PRODUCING TYPICAL AIRCRAFT SHAPES FROM BERYLLIUM. Interim Technical Documentary Progress Report for the Period ending October 31, 1962

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jenkins, R.G.; Siergiej, J.M.

1962-12-28

In a program to develop a complete manufacturing process for ihe production of beryllium channels, techniques are being sought for drawing to obtain a flnal product meeting specifications more rigorous than are obtainable by direct extrusion. Progress in designing and procuring the special tooling required to draw complex shapes at elevated temperature is described, and the flrst set of draw dies is evaluated with respect to design and quality. Three experimental draw attempts have been made on U-channels, in addition to draw tests on flats. (auth)

Progress of research on water vapor lidar

NASA Technical Reports Server (NTRS)

Wilkerson, Thomas D.; Singh, U. N.

1989-01-01

Research is summarized on applications of stimulated Raman scattering (SRS) of laser light into near infrared wavelengths suitable for atmospheric monitoring. Issues addressed are conversion efficiency, spectral purity, optimization of operating conditions, and amplification techniques. A Raman cell was developed and built for the laboratory program, and is now available to NASA-Langley, either as a design or as a completed cell for laboratory or flight applications. The Raman cell has been approved for flight in NASA's DC-8 aircraft. The self-seeding SRS technique developed here is suggested as an essential improvement for tunable near-IR DIAL applications at wavelengths of order 1 micrometer or greater.

Color masking of developmental enamel defects: a case series.

PubMed

Torres, C R G; Borges, A B

2015-01-01

Developmental defects involving color alteration of enamel frequently compromise the esthetic appearance of the tooth. The resin infiltration technique represents an alternative treatment for color masking of these lesions and uniformization of tooth color. This technique is considered relatively simple and microinvasive, since only a minimal portion of enamel is removed. This article illustrates the color-masking effect with resin infiltration of fluorosis and traumatic hypomineralization lesions with a case series. The final esthetic outcomes demonstrated the ability of the resin infiltrant to mask the color of white developmental defect lesions, resulting in satisfactory clinical esthetic improvements. However, in more severe cases, the color-masking effect was not complete.

Spinal cord injuries functional rehabilitation - Traditional approaches and new strategies in physiotherapy.

PubMed

de Almeida, Patrícia Maria Duarte

2006-02-01

Considering the body structures and systems loss of function, after a Spinal Cord Injury, with is respective activities limitations and social participation restriction, the rehabilitation process goals are to achieve the maximal functional independence and quality of life allowed by the clinical lesion. For this is necessary a rehabilitation period with a rehabilitation team, including the physiotherapist whose interventions will depend on factors such degree of completeness or incompleteness and patient clinical stage. Physiotherapy approach includes several procedures and techniques related with a traditional model or with the recent perspective of neuronal regeneration. Following a traditional model, the interventions in complete A and incomplete B lesions, is based on compensatory method of functional rehabilitation using the non affected muscles. In the incomplete C and D lesions, motor re-education below the lesion, using key points to facilitate normal and selective patterns of movement is preferable. In other way if the neuronal regeneration is possible with respective function improve; the physiotherapy approach goals are to maintain muscular trofism and improve the recruitment of motor units using intensive techniques. In both, there is no scientific evidence to support the procedures, exists a lack of investigation and most of the research are methodologically poor. © 2006 Sociedade Portuguesa de Pneumologia/SPP.

Effects of competitive learning tools on medical students: A case study.

PubMed

Corell, Alfredo; Regueras, Luisa M; Verdú, Elena; Verdú, María J; de Castro, Juan P

2018-01-01

Competitive learning techniques are being successfully used in courses of different disciplines. However, there is still a significant gap in analyzing their effects in medical students competing individually. The authors conducted this study to assess the effectiveness of the use of a competitive learning tool on the academic achievement and satisfaction of medical students. The authors collected data from a Human Immunology course in medical students (n = 285) and conducted a nonrandomized (quasi-experimental) control group pretest-posttest design. They used the Mann-Whitney U-test to measure the strength of the association between two variables and to compare the two student groups. The improvement and academic outcomes of the experimental group students were significantly higher than those of the control group students. The students using the competitive learning tool had better academic performance, and they were satisfied with this type of learning. The study, however, had some limitations. The authors did not make a random assignment to the control and experimental groups and the groups were not completely homogenous. The use of competitive learning techniques motivates medical students, improves their academic outcomes and may foster the cooperation among students and provide a pleasant classroom environment. The authors are planning further studies with a more complete evaluation of cognitive learning styles or incorporating chronometry as well as team-competition.

Extended behavioural modelling of FET and lattice-mismatched HEMT devices

NASA Astrophysics Data System (ADS)

Khawam, Yahya; Albasha, Lutfi

2017-07-01

This study presents an improved large signal model that can be used for high electron mobility transistors (HEMTs) and field effect transistors using measurement-based behavioural modelling techniques. The steps for accurate large and small signal modelling for transistor are also discussed. The proposed DC model is based on the Fager model since it compensates between the number of model's parameters and accuracy. The objective is to increase the accuracy of the drain-source current model with respect to any change in gate or drain voltages. Also, the objective is to extend the improved DC model to account for soft breakdown and kink effect found in some variants of HEMT devices. A hybrid Newton's-Genetic algorithm is used in order to determine the unknown parameters in the developed model. In addition to accurate modelling of a transistor's DC characteristics, the complete large signal model is modelled using multi-bias s-parameter measurements. The way that the complete model is performed is by using a hybrid multi-objective optimisation technique (Non-dominated Sorting Genetic Algorithm II) and local minimum search (multivariable Newton's method) for parasitic elements extraction. Finally, the results of DC modelling and multi-bias s-parameters modelling are presented, and three-device modelling recommendations are discussed.

Two- versus four-handed techniques for endonasal resection of orbital apex tumors.

PubMed

Craig, John R; Lee, John Y K; Petrov, Dmitriy; Mehta, Sonul; Palmer, James N; Adappa, Nithin D

2015-01-01

Open versus endonasal resection of orbital apex (OA) tumors is generally based on tumor size, location, and pathology. For endonasal resection, two- and four-handed techniques have been reported, but whether one technique is more optimal based on these tumor features has not been evaluated. To determine whether two- versus four-handed techniques result in better outcomes after endoscopic resection of OA tumors, and whether either technique is better suited for intra- versus extraconal location and for benign versus malignant pathology. A retrospective review of all expanded endonasal approaches for OA tumors was performed at a single institution from 2009 to 2013. A PubMed database search was also performed to review series published on endonasal OA tumor resection. Across all the cases reviewed, the following data were recorded: two- versus four-handed techniques, intra- versus extraconal tumor location, and benign versus malignant pathology. The relationship between these variables and resection extent was analyzed by the Fisher exact test. Postoperative visual status and complications were also reviewed. Ten cases from the institution and 94 cases from 17 publications were reviewed. Both two- and four-handed techniques were used to resect extra- and intraconal OA tumors, for both benign and malignant pathology. Four-handed techniques included a purely endonasal approach and a combined endonasal-orbital approach. On univariate analysis, the strongest predictor of complete resection was benign pathology (p = 0.005). No significant difference was found between the extent of resection and a two- versus a four-handed technique. Visual status was improved or unchanged in 94% of cases, and other complications were rare. Benign tumors that involve the medial extraconal and posterior inferomedial intraconal OA can be treated by either two- or four-handed endonasal techniques. Selecting two- versus four-handed techniques and endonasal versus endonasal-orbital four-handed techniques depends mainly on surgeons' experience. Endonasal approaches for malignant OA tumors are less likely to result in complete resection.

Laparoscopic left hepatectomy in swine: a safe and feasible technique.

PubMed

Zhang, Hua; Liu, Tao; Wang, Yue; Liu, Hai-Feng; Zhang, Jian-Tao; Wu, Yan-Shuang; Lei, Lei; Wang, Hong-Bin

2014-01-01

A purely laparoscopic four-port approach was created for left hepatectomy in pigs. A polyethylene loop was placed on the left two hepatic lobes for traction and lift. Next, penetrating ligation of the lobes using of a double row of silk sutures was performed to control bleeding. A direct hepatic transection was completed using a monopolar hook electrode without meticulous dissection of the left hepatic vein. The raw surface of the liver was coagulated and sealed with fibrin glue. Lobes were retrieved through an enlarged portal. Laparoscopic hepatic lobectomy was completed in all pigs without the use of specialized instruments and with a mean operative time of 179 ± 9 min. No significant perioperative complications were observed. The average weight of each resected lobe was 180 ± 51 g. Complete blood count as well as serum organics and enzyme levels normalized after about 2 weeks. During necropsy, adhesion of the hepatic raw surface to the gastric wall and omentum were observed. No other abnormalities were identified. This minimally invasive left hepatectomy technique in swine could serve as a useful model for investigating liver diseases and regeneration, and offer preclinical information to improve hepatobiliary surgical procedures.

Simulation-Based Mastery Learning with Deliberate Practice Improves Clinical Performance in Spinal Anesthesia

PubMed Central

Udani, Ankeet D.; Macario, Alex; Tanaka, Maria A.; Tanaka, Pedro P.

2014-01-01

Introduction. Properly performing a subarachnoid block (SAB) is a competency expected of anesthesiology residents. We aimed to determine if adding simulation-based deliberate practice to a base curriculum improved performance of a SAB. Methods. 21 anesthesia residents were enrolled. After baseline assessment of SAB on a task-trainer, all residents participated in a base curriculum. Residents were then randomized so that half received additional deliberate practice including repetition and expert-guided, real-time feedback. All residents were then retested for technique. SABs on all residents' next three patients were evaluated in the operating room (OR). Results. Before completing the base curriculum, the control group completed 81% of a 16-item performance checklist on the task-trainer and this increased to 91% after finishing the base curriculum (P < 0.02). The intervention group also increased the percentage of checklist tasks properly completed from 73% to 98%, which was a greater increase than observed in the control group (P < 0.03). The OR time required to perform SAB was not different between groups. Conclusions. The base curriculum significantly improved resident SAB performance. Deliberate practice training added a significant, independent, incremental benefit. The clinical impact of the deliberate practice intervention in the OR on patient care is unclear. PMID:25157263

Simulation-based mastery learning with deliberate practice improves clinical performance in spinal anesthesia.

PubMed

Udani, Ankeet D; Macario, Alex; Nandagopal, Kiruthiga; Tanaka, Maria A; Tanaka, Pedro P

2014-01-01

Introduction. Properly performing a subarachnoid block (SAB) is a competency expected of anesthesiology residents. We aimed to determine if adding simulation-based deliberate practice to a base curriculum improved performance of a SAB. Methods. 21 anesthesia residents were enrolled. After baseline assessment of SAB on a task-trainer, all residents participated in a base curriculum. Residents were then randomized so that half received additional deliberate practice including repetition and expert-guided, real-time feedback. All residents were then retested for technique. SABs on all residents' next three patients were evaluated in the operating room (OR). Results. Before completing the base curriculum, the control group completed 81% of a 16-item performance checklist on the task-trainer and this increased to 91% after finishing the base curriculum (P < 0.02). The intervention group also increased the percentage of checklist tasks properly completed from 73% to 98%, which was a greater increase than observed in the control group (P < 0.03). The OR time required to perform SAB was not different between groups. Conclusions. The base curriculum significantly improved resident SAB performance. Deliberate practice training added a significant, independent, incremental benefit. The clinical impact of the deliberate practice intervention in the OR on patient care is unclear.

Flight test evaluation of predicted light aircraft drag, performance, and stability

NASA Technical Reports Server (NTRS)

Smetana, F. O.; Fox, S. R.

1979-01-01

A technique was developed which permits simultaneous extraction of complete lift, drag, and thrust power curves from time histories of a single aircraft maneuver such as a pull up (from V max to V stall) and pushover (to V max for level flight). The technique, which is an extension of nonlinear equations of motion of the parameter identification methods of Iliff and Taylor and includes provisions for internal data compatibility improvement as well, was shown to be capable of correcting random errors in the most sensitive data channel and yielding highly accurate results. Flow charts, listings, sample inputs and outputs for the relevant routines are provided as appendices. This technique was applied to flight data taken on the ATLIT aircraft. Lack of adequate knowledge of the correct full throttle thrust horsepower true airspeed variation and considerable internal data inconsistency made it impossible to apply the trajectory matching features of the technique.

Endoscopic resection of subepithelial tumors

PubMed Central

Schmidt, Arthur; Bauder, Markus; Riecken, Bettina; Caca, Karel

2014-01-01

Management of subepithelial tumors (SETs) remains challenging. Endoscopic ultrasound (EUS) has improved differential diagnosis of these tumors but a definitive diagnosis on EUS findings alone can be achieved in the minority of cases. Complete endoscopic resection may provide a reasonable approach for tissue acquisition and may also be therapeutic in case of malignant lesions. Small SET restricted to the submucosa can be removed with established basic resection techniques. However, resection of SET arising from deeper layers of the gastrointestinal wall requires advanced endoscopic methods and harbours the risk of perforation. Innovative techniques such as submucosal tunneling and full thickness resection have expanded the frontiers of endoscopic therapy in the past years. This review will give an overview about endoscopic resection techniques of SET with a focus on novel methods. PMID:25512768

Outcome Comparison Between in Situ Repair Versus Tear Completion Repair for Partial Thickness Rotator Cuff Tears.

PubMed

Kim, Yang-Soo; Lee, Hyo-Jin; Bae, Sung-Ho; Jin, Hyonki; Song, Hyun Seok

2015-11-01

To compare the clinical outcomes of arthroscopic in situ repair with the tear completion repair technique for partial-thickness rotator cuff tears (PT-RCTs). We prospectively enrolled 100 cases with articular-sided and bursal-sided PT-RCTs exceeding 50% of tendon thickness and allocated them randomly. An in situ repair was performed in group 1 (n = 50). Completion of the remaining cuff tissue and repair were performed in group 2 (n = 50). The medial row was knotted as transosseous repair (suture-bridge technique) in all cases. American Shoulder Elbow Society (ASES) score, Constant shoulder (CS) score, Simple shoulder (SS) score, and Korean shoulder (KS) score, and visual analog scale (VAS) for pain and range of motion were assessed at 3, 6, and 12 months and at the last visit. Repaired tendon integrity was determined at 6 to 12 months by magnetic resonance imaging. Eight cases were lost to follow-up. Ultimately, 92 cases were analyzed. The average follow-up was 19.1 months (range, 12 to 42 months). Significant improvements in the VAS for pain and functional outcomes were observed in both groups postoperatively (P = .001 for VAS; P < .001 for ASES score; P < .001 for CS score; P = .001 for SS score; P<.001 for KS score). No significant difference in the clinical results was observed at any time between the groups. No difference of retear rate on articular-sided PT-RCT was observed between the groups (P = .34). Retears on the bursal-sided PT-RCT were more frequent in group 2 (P = .02). Arthroscopic repair of PT-RCT exceeding 50% of the thickness provided functional improvements and pain relief regardless of the repair technique. The retear rate for bursal-sided PT-RCT was higher in group 2, although the retear rate for the articular-sided PT-RCT was not different. Level II, prospective comparative study. Copyright © 2015 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.

The effectiveness of preplant seed bio-invigoration techniques using Bacillus sp. CKD061 to improving seed viability and vigor of several local upland rice cultivars of Southeast Sulawesi

NASA Astrophysics Data System (ADS)

Sutariati, G. A. K.; Bande, L. O. S.; Khaeruni, A.; Muhidin; Mudi, L.; Savitri, R. M.

2018-02-01

Research was aimed to evaluate the bio-invigoration techniques using Bacillus sp. CKD061 in improving seed viability and vigor of local upland rice. The research is arranged in factorial with completely randomized design (CRD). The different upland rice cultivars as first factor that consists of 11 cultivars, namely: Pae Tinangge, Pae Rowu, Pae Uwa, Pae Tanta, Pae Waburi-Buri, Pae Mornene, Pae Indalibana, Pae Lawarangka, Pae Huko, Pae Wagamba and Pae Momea. The second factor is the seed bio-invigoration technique, consists of 5 treatments, namely: without seed bio-invigoration (B0), NaCl + Bacillus sp. CKD061 (B1), KNO3 + Bacillus sp. CKD061 (B2), Ground burned-rice husk + Bacillus sp. CKD061 (B3), and Ground brick + Bacillus sp. CKD061 (B4). The results showed that seed bio-invigoration using Bacillus sp. CKD061 gave effect on the seed viability and vigor. Interaction of the seed bio-invigoration and upland rice cultivars were able to improve seed viability and vigor. Seed bio-invigoration ttreatment using ground brick + Bacillus sp. CKD061 was the best treatment, which could improve the viability and vigor of Pae Waburi-Buri, Pae Mornene and Pae Indalibana. The treatment increased vigor index by 133% in Pae Waburi-Buri and 127% in Pae Mornene, and Pae Indalibana compared with control.

Fixation of Winged Scapula in Facioscapulohumeral Muscular Dystrophy

PubMed Central

Giannini, Sandro; Faldini, Cesare; Pagkrati, Stavroula; Grandi, Gianluca; Digennaro, Vitantonio; Luciani, Deianira; Merlini, Luciano

2007-01-01

Objective: To verify if stabilizing the scapulothoracic joint without arthrodesis could lead to functional improvement of shoulder range of motion and clinical improvement of winged scapula, we incorporated four additional patients into our previous analysis to determine if the results obtained were long lasting, and to compare this fixation with the other techniques described in the literature, balancing the benefits with the complications. Design: A retrospective study. Participants: Thirteen patients with bilateral winged scapula affected by facioscapulohumeral muscular dystrophy. Nine of these patients had been analyzed in our previous study. Methods: Patients were operated on by bilateral fixing of the scapula to the rib cage using metal wires without arthrodesis (scapulopexy). Results: All patients experienced improvement in active range of motion of the shoulder and all of them had clinical improvement with complete resolution of the winged scapula. In all twenty-six surgical interventions of scapulopexy, a stable and long-lasting fixation of the scapula to the rib cage was achieved.The complications strictly associated to the surgical technique encountered were one pneumothorax, which was resolved spontaneously, and one wire breakage without trauma. Average follow-up was 10 years (range, 3 to 18 years). Conclusion: The scapulopexy used in this extended series of patients consisted of repositioning the scapula and fixing it to four ribs by using metal wires without performing arthrodesis.This technique has a low rate of complications, is reproducible, safe and effective, resulting in clinical and functional improvement. PMID:18056023

Comparison of measured and calculated dynamic loads for the Mod-2 2.5 mW wind turbine system

NASA Technical Reports Server (NTRS)

Zimmerman, D. K.; Shipley, S. A.; Miller, R. D.

1995-01-01

The Boeing Company, under contract to the Electric Power Research Institute (EPRI), has completed a test program on the Mod-2 wind turbines at Goodnoe Hills, Washington. The objectives were to update fatigue load spectra, discern site and machine differences, measure vortex generator effects, and to evaluate rotational sampling techniques. This paper shows the test setup and loads instrumentation, loads data comparisons and test/analysis correlations. Test data are correlated with DYLOSAT predictions using both the NASA interim turbulence model and rotationally sampled winds as inputs. The latter is demonstrated to have the potential to improve the test/analysis correlations. The paper concludes with an assessment of the importance of vortex generators, site dependence, and machine differences on fatigue loads. The adequacy of prediction techniques used are evaluated and recommendations are made for improvements to the methodology.

MetroBeta: Beta Spectrometry with Metallic Magnetic Calorimeters in the Framework of the European Program of Ionizing Radiation Metrology

NASA Astrophysics Data System (ADS)

Loidl, M.; Beyer, J.; Bockhorn, L.; Enss, C.; Györi, D.; Kempf, S.; Kossert, K.; Mariam, R.; Nähle, O.; Paulsen, M.; Rodrigues, M.; Schmidt, M.

2018-05-01

MetroBeta is a European project aiming at the improvement of the knowledge of the shapes of beta spectra, both in terms of theoretical calculations and measurements. It is part of a common European program of ionizing radiation metrology. Metallic magnetic calorimeters (MMCs) with the beta emitter embedded in the absorber have in the past proven to be among the best beta spectrometers, in particular for low-energy beta transitions. Within this project, new designs of MMCs optimized for five different beta energy ranges were developed. A new detector module with thermal decoupling of MMC and SQUID chips was designed. An important aspect of the research and development concerns the source/absorber preparation techniques. Four beta spectra with maximum energies ranging from 76 to 709 keV will be measured. Improved theoretical calculation methods and complementary measurement techniques complete the project.

The use of self-Reiki for stress reduction and relaxation.

PubMed

Bukowski, Elaine L

2015-09-01

More than one-third of college students reported the desire for stress reduction techniques and education. The purpose of this study was to determine the effects of a 20-week structured self-Reiki program on stress reduction and relaxation in college students. Students were recruited from Stockton University and sessions were conducted in the privacy of their residence. Twenty students completed the entire study consisting of 20 weeks of self-Reiki done twice weekly. Each participant completed a Reiki Baseline Credibility Scale, a Reiki Expectancy Scale, and a Perceived Stress Scale (PSS) after acceptance into the study. The PSS was completed every four weeks once the interventions were initiated. A global assessment questionnaire was completed at the end of the study. Logs summarizing the outcome of each session were submitted at the end of the study. With the exception of three participants, participants believed that Reiki is a credible technique for reducing stress levels. Except for two participants, participants agreed that Reiki would be effective in reducing stress levels. All participants experienced stress within the month prior to completing the initial PSS. There was a significant reduction in stress levels from pre-study to post-study. There was a correlation between self-rating of improvement and final PSS scores. With one exception, stress levels at 20 weeks did not return to pre-study stress levels. This study supports the hypothesis that the calming effect of Reiki may be achieved through the use of self-Reiki.

Physical-level synthesis for digital lab-on-a-chip considering variation, contamination, and defect.

PubMed

Liao, Chen; Hu, Shiyan

2014-03-01

Microfluidic lab-on-a-chips have been widely utilized in biochemical analysis and human health studies due to high detection accuracy, high timing efficiency, and low cost. The increasing design complexity of lab-on-a-chips necessitates the computer-aided design (CAD) methodology in contrast to the classical manual design methodology. A key part in lab-on-a-chip CAD is physical-level synthesis. It includes the lab-on-a-chip placement and routing, where placement is to determine the physical location and the starting time of each operation and routing is to transport each droplet from the source to the destination. In the lab-on-a-chip design, variation, contamination, and defect need to be considered. This work designs a physical-level synthesis flow which simultaneously considers variation, contamination, and defect of the lab-on-a-chip design. It proposes a maze routing based, variation, contamination, and defect aware droplet routing technique, which is seamlessly integrated into an existing placement technique. The proposed technique improves the placement solution for routing and achieves the placement and routing co-optimization to handle variation, contamination, and defect. The simulation results demonstrate that our technique does not use any defective/contaminated grids, while the technique without considering contamination and defect uses 17.0% of the defective/contaminated grids on average. In addition, our routing variation aware technique significantly improves the average routing yield by 51.2% with only 3.5% increase in completion time compared to a routing variation unaware technique.

Multiview photometric stereo.

PubMed

Hernández Esteban, Carlos; Vogiatzis, George; Cipolla, Roberto

2008-03-01

This paper addresses the problem of obtaining complete, detailed reconstructions of textureless shiny objects. We present an algorithm which uses silhouettes of the object, as well as images obtained under changing illumination conditions. In contrast with previous photometric stereo techniques, ours is not limited to a single viewpoint but produces accurate reconstructions in full 3D. A number of images of the object are obtained from multiple viewpoints, under varying lighting conditions. Starting from the silhouettes, the algorithm recovers camera motion and constructs the object's visual hull. This is then used to recover the illumination and initialise a multi-view photometric stereo scheme to obtain a closed surface reconstruction. There are two main contributions in this paper: Firstly we describe a robust technique to estimate light directions and intensities and secondly, we introduce a novel formulation of photometric stereo which combines multiple viewpoints and hence allows closed surface reconstructions. The algorithm has been implemented as a practical model acquisition system. Here, a quantitative evaluation of the algorithm on synthetic data is presented together with complete reconstructions of challenging real objects. Finally, we show experimentally how even in the case of highly textured objects, this technique can greatly improve on correspondence-based multi-view stereo results.

A Novel Repair Method for Radial Tears of the Medial Meniscus: Biomechanical Comparison of Transtibial 2-Tunnel and Double Horizontal Mattress Suture Techniques Under Cyclic Loading.

PubMed

Bhatia, Sanjeev; Civitarese, David M; Turnbull, Travis Lee; LaPrade, Christopher M; Nitri, Marco; Wijdicks, Coen A; LaPrade, Robert F

2016-03-01

Complete radial tears of the medial meniscus have been reported to be functionally similar to a total meniscectomy. At present, there is no consensus on an ideal technique for repair of radial midbody tears of the medial meniscus. Prior attempts at repair with double horizontal mattress suture techniques have led to a reportedly high rate of incomplete healing or healing in a nonanatomic (gapped) position, which compromises the ability of the meniscus to withstand hoop stresses. A newly proposed 2-tunnel radial meniscal repair method will result in decreased gapping and increased ultimate failure loads compared with the double horizontal mattress suture repair technique under cyclic loading. Controlled laboratory study. Ten matched pairs of male human cadaveric knees (average age, 58.6 years; range, 48-66 years) were used. A complete radial medial meniscal tear was made at the junction of the posterior one-third and middle third of the meniscus. One knee underwent a horizontal mattress inside-out repair, while the contralateral knee underwent a radial meniscal repair entailing the same technique with a concurrent novel 2-tunnel repair. Specimens were potted and mounted on a universal testing machine. Each specimen was cyclically loaded 1000 times with loads between 5 and 20 N before experiencing a load to failure. Gap distances at the tear site and failure load were measured. The 2-tunnel repairs exhibited a significantly stronger ultimate failure load (median, 196 N; range, 163-212 N) than did the double horizontal mattress suture repairs (median, 106 N; range, 63-229 N) (P = .004). In addition, the 2-tunnel repairs demonstrated decreased gapping at all testing states (P < .05) with a final measured gapping of 1.7 mm and 4.1 mm after 1000 cycles for the 2-tunnel and double horizontal mattress suture repairs, respectively. The 2-tunnel repairs displayed significantly less gapping distance after cyclic loading and had significantly stronger ultimate failure loads compared with the double horizontal mattress suture repairs. Complete radial tears of the medial meniscus significantly decrease the ability of the meniscus to dissipate tibiofemoral loads, predisposing patients to early osteoarthritis. Improving the ability to repair medial meniscal radial tears in a way that withstands cyclic loads and heals in an anatomic position could significantly improve patient healing rates and result in improved preservation of the articular cartilage of the medial compartment of the knee. The 2-tunnel repair may be a more reliable and stronger repair option for midbody radial tears of the medial meniscus. Clinical studies are warranted to further evaluate these repairs. © 2015 The Author(s).

Reconstruction of Large Postburn Facial-Scalp Scars by Expanded Pedicled Deltopectoral Flap and Random Scalp Flap: Technique Improvements to Enlarge the Reconstructive Territory.

PubMed

Ma, Xianjie; Li, Yang; Li, Weiyang; Liu, Chaohua; Peng, Pai; Song, Baoqiang; Xia, Wensen; Yi, Chenggang; Lu, Kaihua; Su, Yingjun

2017-09-01

The scars of face and scalp caused by burning often show as 1 large facial-scalp scar. The deltopectoral flap was recognized as one of the first choices for the facial scar reconstruction. However, this flap cannot cross the level of zygomatic arch traditionally when it was transferred with pedicle. When the flap reconstructed the facial-scalp scars with expanded random scalp flap, another flap was often needed to reconstruct the remaining temple and forehead scars. The authors reviewed 24 patients of large facial-scalp scars reconstructed by expanded pedicled deltopectoral flap and scalp flap with several technique improvements. The seaming scar between the deltopectoral flap and scalp flap in the temple region formed the new hairline. The technique improvements included ligation of the perforating branches of the transverse cervical artery and thoracoacromial artery when dissecting the pocket, the partial bolster compressive dressing to the distal part of the flap and dividing the pedicle partly as a delaying procedure before dividing the pedicle completely. Good skin compliance, normal contours, and emotional expression were noted. There were complications including expander exposure in 3 patients, stretch marks in 5 patients, flap tip necrosis in 2 patients, and mild postoperative hypertrophic scars in 3 patients. In conclusion, the expanded pedicled deltopectoral flap can enlarge the reconstructive territory in face successfully with the technique improvements. The combination of the expanded pedicled deltopectoral flap and scalp flap is a reliable and excellent reconstructive option for large postburn facial-scalp scars.

Improving patient-centered communication while using an electronic health record: Report from a curriculum evaluation.

PubMed

Fogarty, Colleen T; Winters, Paul; Farah, Subrina

2016-05-01

Researchers and clinicians are concerned about the impact of electronic health record use and patient-centered communication. Training about patient-centered clinical communication skills with the electronic health record may help clinicians adapt and remain patient-centered. We developed an interactive workshop eliciting challenges and opportunities of working with the electronic health record in clinical practice, introduction of specific patient-centered behaviors and mindful practice techniques, and video demonstrating contrasts in common behavior and "better practices." One hundred thirty-nine resident physicians and faculty supervisors in five residency training programs at the University of Rochester Medical Center participated in the workshops. Participants were asked to complete an 11-item survey of behaviors related to their use of the electronic health record prior to training and after attending training. We used paired t-tests to assess changes in self-reported behavior from pre-intervention to post-intervention. We trained 139 clinicians in the workshops; 110 participants completed the baseline assessment and 39 completed both the baseline and post-intervention assessment. Data from post-curriculum respondents found a statistically significant increase in "I told the patient when turning my attention from the patient to the computer," from 60% of the time prior to the training to 70% of the time after. Data from our program evaluation demonstrated improvement in one communication behavior. Sample size limited the detection of other changes; further research should investigate effective training techniques for patient-centered communication while using the electronic health record. © The Author(s) 2016.

Electronic surveys: how to maximise success.

PubMed

McPeake, Joanne; Bateson, Meghan; O'Neill, Anna

2014-01-01

To draw on the researchers' experience of developing and distributing a UK-wide electronic survey. The evolution of electronic surveys in healthcare research will be discussed, as well as simple techniques that can be used to improve response rates for this type of data collection. There is an increasing use of electronic survey methods in healthcare research. However, in recent published research, electronic surveys have had lower response rates than traditional survey methods, such as postal and telephone surveys. This is a methodology paper. Electronic surveys have many advantages over traditional surveys, including a reduction in cost and ease of analysis. Drawbacks to this type of data collection include the potential for selection bias and poorer response rates. However, research teams can use a range of simple strategies to boost response rates. These approaches target the different stages of achieving a complete response: initial attraction through personalisation, engagement by having an easily accessible link to the survey, and transparency of survey length and completion though targeting the correct, and thereby interested, population. The fast, efficient and often 'free' electronic survey has many advantages over the traditional postal data collection method, including ease of analysis for what can be vast amounts of data. However, to capitalise on these benefits, researchers must carefully consider techniques to maximise response rates and minimise selection bias for their target population. Researchers can use a range of strategies to improve responses from electronic surveys, including sending up to three reminders, personalising each email, adding the updated response rate to reminder emails, and stating the average time it would take to complete the survey in the title of the email.

Dynamic visualization techniques for high consequence software

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pollock, G.M.

1998-02-01

This report documents a prototype tool developed to investigate the use of visualization and virtual reality technologies for improving software surety confidence. The tool is utilized within the execution phase of the software life cycle. It provides a capability to monitor an executing program against prespecified requirements constraints provided in a program written in the requirements specification language SAGE. The resulting Software Attribute Visual Analysis Tool (SAVAnT) also provides a technique to assess the completeness of a software specification. The prototype tool is described along with the requirements constraint language after a brief literature review is presented. Examples of howmore » the tool can be used are also presented. In conclusion, the most significant advantage of this tool is to provide a first step in evaluating specification completeness, and to provide a more productive method for program comprehension and debugging. The expected payoff is increased software surety confidence, increased program comprehension, and reduced development and debugging time.« less

Coherent optical adaptive technique improves the spatial resolution of STED microscopy in thick samples

PubMed Central

Yan, Wei; Yang, Yanlong; Tan, Yu; Chen, Xun; Li, Yang; Qu, Junle; Ye, Tong

2018-01-01

Stimulated emission depletion microscopy (STED) is one of far-field optical microscopy techniques that can provide sub-diffraction spatial resolution. The spatial resolution of the STED microscopy is determined by the specially engineered beam profile of the depletion beam and its power. However, the beam profile of the depletion beam may be distorted due to aberrations of optical systems and inhomogeneity of specimens’ optical properties, resulting in a compromised spatial resolution. The situation gets deteriorated when thick samples are imaged. In the worst case, the sever distortion of the depletion beam profile may cause complete loss of the super resolution effect no matter how much depletion power is applied to specimens. Previously several adaptive optics approaches have been explored to compensate aberrations of systems and specimens. However, it is hard to correct the complicated high-order optical aberrations of specimens. In this report, we demonstrate that the complicated distorted wavefront from a thick phantom sample can be measured by using the coherent optical adaptive technique (COAT). The full correction can effectively maintain and improve the spatial resolution in imaging thick samples. PMID:29400356

Introducing quality improvement methods into local public health departments: structured evaluation of a statewide pilot project.

PubMed

Riley, William; Parsons, Helen; McCoy, Kim; Burns, Debra; Anderson, Donna; Lee, Suhna; Sainfort, François

2009-10-01

To test the feasibility and assess the preliminary impact of a unique statewide quality improvement (QI) training program designed for public health departments. One hundred and ninety-five public health employees/managers from 38 local health departments throughout Minnesota were selected to participate in a newly developed QI training program and 65 of those engaged in and completed eight expert-supported QI projects over a period of 10 months from June 2007 through March 2008. As part of the Minnesota Quality Improvement Initiative, a structured distance education QI training program was designed and deployed in a first large-scale pilot. To evaluate the preliminary impact of the program, a mixed-method evaluation design was used based on four dimensions: learner reaction, knowledge, intention to apply, and preliminary outcomes. Subjective ratings of three dimensions of training quality were collected from participants after each of the scheduled learning sessions. Pre- and post-QI project surveys were administered to collect participant reactions, knowledge, future intention to apply learning, and perceived outcomes. Monthly and final QI project reports were collected to further inform success and preliminary outcomes of the projects. The participants reported (1) high levels of satisfaction with the training sessions, (2) increased perception of the relevance of the QI techniques, (3) increased perceived knowledge of all specific QI methods and techniques, (4) increased confidence in applying QI techniques on future projects, (5) increased intention to apply techniques on future QI projects, and (6) high perceived success of, and satisfaction with, the projects. Finally, preliminary outcomes data show moderate to large improvements in quality and/or efficiency for six out of eight projects. QI methods and techniques can be successfully implemented in local public health agencies on a statewide basis using the collaborative model through distance training and expert facilitation. This unique training can improve both core and support processes and lead to favorable staff reactions, increased knowledge, and improved health outcomes. The program can be further improved and deployed and holds great promise to facilitate the successful dissemination of proven QI methods throughout local public health departments.

Preoperative warm-up the key to improved resident technique: a randomized study.

PubMed

Moran-Atkin, Erin; Abdalla, Gamal; Chen, Grace; Magnuson, Thomas H; Lidor, Anne O; Schweitzer, Michael A; Steele, Kimberley E

2015-05-01

The ACGME has required that a skills lab be incorporated into the surgical residency curriculum. While the value of warm-up is generally accepted in other areas requiring complex motor skills, there is little evidence to support the benefits of warm-up prior to performing surgery. We are conducting this study in an attempt to identify whether a warm-up period prior to operating impacts operative technique. All general surgery residents and MIS fellows were included in this IRB-approved randomized study. Participants were randomized to either warm-up or no warm-up groups. Participants randomized to the warm-up group completed a 10 min practice session in the simulation lab within 1 h of starting the case, using an FLS training box. At the conclusion of the operation, the participant was evaluated by the attending surgeon using the validated global rating scales of Reznick and Vassiliou. The attending surgeons were blinded to the use of pre-procedure warm-up. The results of the questionnaire were analyzed using student's t test with p < 0.05 for significance. Pilot data were obtained after completing 40 cases that were randomized to warm-up (19) or no warm-up (21). There was a statistically significant improvement in depth perception (p = 0.02), bimanual dexterity (p = 0.01), and efficiency of movements (p = 0.03) for those randomized to warm-up. There was statistical improvement when we preformed a composite scoring of the attending evaluations for each of the Reznick (p = 0.008) and the Vassiliou (p = 0.01) global rating scales. Preoperative warm-up significantly improves depth perception, bimanual dexterity, and efficiency of movements, as well as improvement in composite scores as judged by the attending surgeon. The lack of self-perceived improvement by the residents may be a reflection of the high standards and intense self-critique that is common among surgical trainees. We believe that our findings, while preliminary, reflect that surgical performance can be enhanced through structured warm-up activities.

Supervised autonomous robotic soft tissue surgery.

PubMed

Shademan, Azad; Decker, Ryan S; Opfermann, Justin D; Leonard, Simon; Krieger, Axel; Kim, Peter C W

2016-05-04

The current paradigm of robot-assisted surgeries (RASs) depends entirely on an individual surgeon's manual capability. Autonomous robotic surgery-removing the surgeon's hands-promises enhanced efficacy, safety, and improved access to optimized surgical techniques. Surgeries involving soft tissue have not been performed autonomously because of technological limitations, including lack of vision systems that can distinguish and track the target tissues in dynamic surgical environments and lack of intelligent algorithms that can execute complex surgical tasks. We demonstrate in vivo supervised autonomous soft tissue surgery in an open surgical setting, enabled by a plenoptic three-dimensional and near-infrared fluorescent (NIRF) imaging system and an autonomous suturing algorithm. Inspired by the best human surgical practices, a computer program generates a plan to complete complex surgical tasks on deformable soft tissue, such as suturing and intestinal anastomosis. We compared metrics of anastomosis-including the consistency of suturing informed by the average suture spacing, the pressure at which the anastomosis leaked, the number of mistakes that required removing the needle from the tissue, completion time, and lumen reduction in intestinal anastomoses-between our supervised autonomous system, manual laparoscopic surgery, and clinically used RAS approaches. Despite dynamic scene changes and tissue movement during surgery, we demonstrate that the outcome of supervised autonomous procedures is superior to surgery performed by expert surgeons and RAS techniques in ex vivo porcine tissues and in living pigs. These results demonstrate the potential for autonomous robots to improve the efficacy, consistency, functional outcome, and accessibility of surgical techniques. Copyright © 2016, American Association for the Advancement of Science.

Completion techniques for horizontal wells in the Pearsall Austin Chalk

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pope, C.D.; Handren, P.J.

1992-05-01

Oryx Energy Co. used three basic completion techniques and various combinations of them to complete 20 horizontal wells in the Pearsall Austin Chalk. The completion method selected is based on a general set of guidelines. In this paper additionally, equipment selection and various types of workover operations are reviewed.

Characterization of Calcite Mineral Precipitation Process by EICP in Porous Media

NASA Astrophysics Data System (ADS)

Kim, D.; Mahabadi, N.; Hall, C.; Jang, J.; van Paassen, L. A.

2017-12-01

One of the most prevalent ground improvement techniques is injection of synthetic materials, such as cement grout or silicates into the pore space to create cementing bonds between soil particles. Besides these traditional ground improvement methods, several biological processes have been developed to improve soil properties. Enzyme induced carbonate precipitation (EICP) is a biological process in which urea hydrolyzes into ammonia and inorganic carbon, and promotes carbonate mineral precipitation. Different morphologies and patterns of calcite mineral precipitation, such as particle surface coating, pore filling, and soil particles bonding, have been observed in the previous studies. Most of the researches have detected precipitated minerals after the completion of the treatment using SEM (Scanning Electron Microscope) imaging and XRD (X-ray Diffractometer) structural analysis. In this research, an EICP reaction medium is injected into a microfluidic chip to observe the entire process of carbonate precipitation through several cycles of EICP treatment in the porous medium. Once the process of mineral precipitation is completed, water is injected into the microfluidic chip with different flow rates to evaluate the stability of carbonates during fluid flow injection.

Frankfurt microsurgery course: the first 175 trainees.

PubMed

Perez-Abadia, G; Janko, M; Pindur, L; Sauerbier, M; Barker, J H; Joshua, I; Marzi, I; Frank, J

2017-06-01

Microsurgery courses, taught external to surgical training programs, are essential for acquiring the high level of technical skill required for clinical proficiency. The Frankfurt microsurgery course is a 5-day, intensive course that teaches arterial and venous anastomosis using end-to-end, end-to-side, one-way-up, continuous-suture, and vessel graft techniques. During the course, the instructor records the level of skill (in-course data) achieved by each trainee by assessing anastomosis completion and patency. Demographic information is also collected. Post-course trainees are invited to complete an online survey (post-course data) to get their opinions of the courses' effectiveness. The in-course "skill achievement" and post-course "course effectiveness" data are presented below. In-course data: 94.8 and 59.9% of participants completed patent end-to-end arterial and venous anastomoses, respectively, while 85.4% performed a patent end-to-side anastomosis. 96.1 and 57.1% of participants who attempted arterial and venous anastomoses using the one-way-up technique were successful, as were 90.9% of those attempting continuous-suture technique. Patent venous grafts were performed by 54.7% of participants. All respondents indicated significant improvement of their microsurgical skills after taking the course. 66.7% of respondents considered the full-time presence of the instructor to be the most valuable aspect of the course. All respondents would highly recommend the course to colleagues. The microcourse significantly increased trainees' clinical microsurgery skills, confidence, and the number of clinical cases they perform. Of all the anastomosis techniques taught, venous anastomosis and grafting were the most difficult to learn. The presence of a full-time experienced instructor was most important.

Computer-enhanced robotic telesurgery minimizes esophageal perforation during Heller myotomy.

PubMed

Melvin, W Scott; Dundon, John M; Talamini, Mark; Horgan, Santiago

2005-10-01

Laparoscopic Heller myotomy has emerged as the treatment of choice for achalasia. However, intraoperative esophageal perforation remains a significant complication. Computer-enhanced operative techniques have the potential to improve outcomes for certain operative procedures. Robotic, computer-enhanced laparoscopic telemanipulators using 3-dimensional magnified imaging and motion scaling are designed uniquely to facilitate certain operations requiring fine-tissue manipulation. We hypothesized that computer-enhanced robotic Heller myotomy would reduce intraoperative complications compared with laparoscopic techniques. All patients undergoing an operation for achalasia at 3 institutions with a robotic surgery system (DaVinci; Intuitive Surgical Corporation, Sunnyvale, Calif) were followed-up prospectively. Demographics, perioperative course, complications, and hospital stay were recorded. Follow-up evaluation was obtained via a standardized symptom survey, office visits, and medical records. Data were compared with preoperative symptoms using a Mann-Whitney U test, and operating times were compared using the ANOVA test. Between August 2000 and August 2004 there were 104 patients who underwent a robotic Heller myotomy with partial fundoplicaton. There were 53 women and 51 men. All patients were symptomatic. The operative time was 140.55 minutes overall, but improved from 162.63 minutes to 113.50 minutes from 2000-2002 to 2003-2004 (P = .0001). There were no esophageal perforations. There were 8 minor complications and 1 patient required conversion to an open operation. Sixty-six (62.3%) patients were discharged on the first postoperative day and the average hospital stay was 1.5 days. A symptom survey was completed in 79 of 104 patients (76%) at follow-up evaluation. Symptoms improved in all patients with an average follow-up symptom score of 0.48 compared with 5.0 before the operation (P = .0001). Forty-three of the 79 patients from whom follow-up data were collected had a minimum follow-up period of 1 year. The follow-up period averaged 16 months. No patients required reoperation. Computer-enhanced robotic laparoscopic techniques provide a clear advantage over standard laparoscopy for the operative treatment of achalasia. We have shown in this large series that Heller myotomy can be completed using this technology without esophageal perforation. The application of computer-enhanced operative techniques appears to provide superior outcomes in selected procedures.

Computer Graphics-aided systems analysis: application to well completion design

DOE Office of Scientific and Technical Information (OSTI.GOV)

Detamore, J.E.; Sarma, M.P.

1985-03-01

The development of an engineering tool (in the form of a computer model) for solving design and analysis problems related with oil and gas well production operations is discussed. The development of the method is based on integrating the concepts of ''Systems Analysis'' with the techniques of ''Computer Graphics''. The concepts behind the method are very general in nature. This paper, however, illustrates the application of the method in solving gas well completion design problems. The use of the method will save time and improve the efficiency of such design and analysis problems. The method can be extended to othermore » design and analysis aspects of oil and gas wells.« less

Low cost solar array project production process and equipment task: A Module Experimental Process System Development Unit (MEPSDU)

NASA Technical Reports Server (NTRS)

1981-01-01

Several major modifications were made to the design presented at the PDR. The frame was deleted in favor of a "frameless" design which will provide a substantially improved cell packing factor. Potential shaded cell damage resulting from operation into a short circuit can be eliminated by a change in the cell series/parallel electrical interconnect configuration. The baseline process sequence defined for the MEPSON was refined and equipment design and specification work was completed. SAMICS cost analysis work accelerated, format A's were prepared and computer simulations completed. Design work on the automated cell interconnect station was focused on bond technique selection experiments.

Virtual reality-based simulation training for ventriculostomy: an evidence-based approach.

PubMed

Schirmer, Clemens M; Elder, J Bradley; Roitberg, Ben; Lobel, Darlene A

2013-10-01

Virtual reality (VR) simulation-based technologies play an important role in neurosurgical resident training. The Congress of Neurological Surgeons (CNS) Simulation Committee developed a simulation-based curriculum incorporating VR simulators to train residents in the management of common neurosurgical disorders. To enhance neurosurgical resident training for ventriculostomy placement using simulation-based training. A course-based neurosurgical simulation curriculum was introduced at the Neurosurgical Simulation Symposium at the 2011 and 2012 CNS annual meetings. A trauma module was developed to teach ventriculostomy placement as one of the neurosurgical procedures commonly performed in the management of traumatic brain injury. The course offered both didactic and simulator-based instruction, incorporating written and practical pretests and posttests and questionnaires to assess improvement in skill level and to validate the simulators as teaching tools. Fourteen trainees participated in the didactic component of the trauma module. Written scores improved significantly from pretest (75%) to posttest (87.5%; P < .05). Seven participants completed the ventriculostomy simulation. Significant improvements were observed in anatomy (P < .04), burr hole placement (P < .03), final location of the catheter (P = .05), and procedure completion time (P < .004). Senior residents planned a significantly better trajectory (P < .01); junior participants improved most in terms of identifying the relevant anatomy (P < .03) and the time required to complete the procedure (P < .04). VR ventriculostomy placement as part of the CNS simulation trauma module complements standard training techniques for residents in the management of neurosurgical trauma. Improvement in didactic and hands-on knowledge by course participants demonstrates the usefulness of the VR simulator as a training tool.

Assessing the impact of the introduction of an electronic hospital discharge system on the completeness and timeliness of discharge communication: a before and after study.

PubMed

Mehta, Rajnikant L; Baxendale, Bryn; Roth, Katie; Caswell, Victoria; Le Jeune, Ivan; Hawkins, Jack; Zedan, Haya; Avery, Anthony J

2017-09-05

Hospital discharge summaries are a key communication tool ensuring continuity of care between primary and secondary care. Incomplete or untimely communication of information increases risk of hospital readmission and associated complications. The aim of this study was to evaluate whether the introduction of a new electronic discharge system (NewEDS) was associated with improvements in the completeness and timeliness of discharge information, in Nottingham University Hospitals NHS Trust, England. A before and after longitudinal study design was used. Data were collected using the gold standard auditing tool from the Royal College of Physicians (RCP). This tool contains a checklist of 57 items grouped into seven categories, 28 of which are classified as mandatory by RCP. Percentage completeness (out of the 28 mandatory items) was considered to be the primary outcome measure. Data from 773 patients discharged directly from the acute medical unit over eight-week long time periods (four before and four after the change to the NewEDS) from August 2010 to May 2012 were extracted and evaluated. Results were summarised by effect size on completeness before and after changeover to NewEDS respectively. The primary outcome variable was represented with percentage of completeness score and a non-parametric technique was used to compare pre-NewEDS and post-NewEDS scores. The changeover to the NewEDS resulted in an increased completeness of discharge summaries from 60.7% to 75.0% (p < 0.001) and the proportion of summaries created under 24 h from discharge increased significantly from 78.0% to 93.0% (p < 0.001). Furthermore, five of the seven grouped checklist categories also showed significant improvements in levels of completeness (p < 0.001), although there were reduced levels of completeness for three items (p < 0.001). The introduction of a NewEDS was associated with a significant improvement in the completeness and timeliness of hospital discharge communication.

Successful Therapist-Parent Coaching: How In Vivo Feedback Relates to Parent Engagement in Parent-Child Interaction Therapy.

PubMed

Barnett, Miya L; Niec, Larissa N; Peer, Samuel O; Jent, Jason F; Weinstein, Allison; Gisbert, Patricia; Simpson, Gregory

2017-01-01

Although behavioral parent training is considered efficacious treatment for childhood conduct problems, not all families benefit equally from treatment. Some parents take longer to change their behaviors and others ultimately drop out. Understanding how therapist behaviors impact parental engagement is necessary to improve treatment utilization. This study investigated how different techniques of therapist in vivo feedback (i.e., coaching) influenced parent attrition and skill acquisition in parent-child interaction therapy (PCIT). Participants included 51 parent-child dyads who participated in PCIT. Children (age: M = 5.03, SD = 1.65) were predominately minorities (63% White Hispanic, 16% African American or Black). Eight families discontinued treatment prematurely. Therapist coaching techniques during the first session of treatment were coded using the Therapist-Parent Interaction Coding System, and parent behaviors were coded with the Dyadic Parent-Child Interaction Coding System, Third Edition. Parents who received more responsive coaching acquired child-centered parenting skills more quickly. Therapists used fewer responsive techniques and more drills with families who dropped out of treatment. A composite of therapist behaviors accurately predicted treatment completion for 86% of families. Although group membership was correctly classified for the treatment completers, only 1 dropout was accurately predicted. Findings suggest that therapist in vivo feedback techniques may impact parents' success in PCIT and that responsive coaching may be particularly relevant.

How Well Is Quality Improvement Described in the Perioperative Care Literature? A Systematic Review

PubMed Central

Jones, Emma L.; Lees, Nicholas; Martin, Graham; Dixon-Woods, Mary

2016-01-01

Abstract Background Quality improvement (QI) approaches are widely used across health care, but how well they are reported in the academic literature is not clear. A systematic review was conducted to assess the completeness of reporting of QI interventions and techniques in the field of perioperative care. Methods Searches were conducted using Medline, Scopus, the Cochrane Central Register of Controlled Trials, the Cochrane Effective Practice and Organization of Care database, and PubMed. Two independent reviewers used the Template for Intervention Description and Replication (TIDieR) checklist, which identifies 12 features of interventions that studies should describe (for example, How: the interventions were delivered [e.g., face to face, internet]), When and how much: duration, dose, intensity), to assign scores for each included article. Articles were also scored against a small number of additional criteria relevant to QI. Results The search identified 16,103 abstracts from databases and 19 from other sources. Following review, full-text was obtained for 223 articles, 100 of which met the criteria for inclusion. Completeness of reporting of QI in the perioperative care literature was variable. Only one article was judged fully complete against the 11 TIDieR items used. The mean TIDieR score across the 100 included articles was 6.31 (of a maximum 11). More than a third (35%) of the articles scored 5 or lower. Particularly problematic was reporting of fidelity (absent in 74% of articles) and whether any modifications were made to the intervention (absent in 73% of articles). Conclusions The standard of reporting of quality interventions and QI techniques in surgery is often suboptimal, making it difficult to determine whether an intervention can be replicated and used to deliver a positive effect in another setting. This suggests a need to explore how reporting practices could be improved. PMID:27066922

Current Developments and Perspectives on the Diagnosis and Treatment of Urinary Incontinence and Genital Prolapse in Women

PubMed Central

Naumann, G.; Kölbl, H.

2012-01-01

As a key area of gynaecology, urogynaecology has undergone impressive changes in the past few years. Together with the high prevalence of functional pelvic floor disorders, modern anaesthesia procedures and the introduction of new, innovative minimally invasive operation techniques have led to a dramatic increase in the number of operations for incontinence and prolapses. The increasingly subtle diagnostic options, such as, e. g., 2D and 3D sonography of the pelvic floor provide unambiguous findings and facilitate decision making. Tension-free vaginal slings in retro-pubic, trans-obturator or single-incision techniques show a high success rate with few complications and have almost completely replaced the more invasive abdominal surgical techniques for the operative management of stress incontinence. Especially for recurrent prolapse the use of alloplastic nets leads to a markedly improved anatomic and functional outcome. In spite of the euphoria about modern operation techniques and novel net materials, in-depth knowledge of pelvic floor anatomy, sufficient surgical experience and unequivocal guideline-conform indications are mandatory for satisfactory treatment outcomes. The afflicted women must be informed in detail about alternative procedures and more emphasis should be placed on conservative therapy. Novel surgical techniques should be monitored by registers or clinical trials. The professional society is called upon to improve the training curricula for pelvic floor surgery. PMID:25308980

Improving the professionalism of post-certification teacher through academic supervision in vocational schools

NASA Astrophysics Data System (ADS)

Satyawati, Sophia Tri; Widyanto, I. Putu; Suemy

2017-03-01

This paper examines the principal's efforts in improving the professionalism of post-certification teachers through academic supervision in vocational school. The certification of educators is expected to improve the professionalism of teachers, there are significant changes between the before and after receiving the certificate of educators. One of the efforts made by the principal on increasing the professionalism of teachers is to carry out academic supervision completely and continuously. This paper examines about how principals at vocational schools carry out the programmed academic supervision, and continuing through mentoring, evaluation and coaching. Academic supervision is performed by individual supervision techniques which includes: classroom or practical visit, classroom or practical observation, individual meetings, inter-class or practical places visit, and self-assessment.

Structured Trauma-Focused CBT and Unstructured Play/Experiential Techniques in the Treatment of Sexually Abused Children: A Field Study With Practicing Clinicians.

PubMed

Allen, Brian; Hoskowitz, Natalie Armstrong

2017-05-01

Structured, trauma-focused cognitive-behavioral therapy (CBT) techniques are widely considered an effective intervention for children who experienced sexual abuse. However, unstructured (i.e., nondirective) play/experiential techniques have a longer history of widespread promotion and are preferred by many practicing clinicians. No evidence is available, however, to determine how the integration of these techniques impacts treatment outcome. In this study, community-based clinicians who received training in a structured, trauma-focused cognitive-behavioral intervention administered pretreatment and posttreatment evaluations to 260 sexually abused children presenting with elevated posttraumatic stress. In addition, they completed a questionnaire describing the treatment techniques implemented with each child. Overall, significant improvement was observed for each of the six clinical outcomes. Regression analyses indicated that technique selection was a significant factor in posttreatment outcome for posttraumatic stress, dissociation, anxiety, and anger/aggression. In general, a greater utilization of the structured CBT techniques was related to lower posttreatment scores, whereas a higher frequency of play/experiential techniques was associated with higher posttreatment scores. However, no interaction effects were observed. The implication of these findings for clinical practice and future research are examined.

Does Replacing Live Demonstration With Instructional Videos Improve Student Satisfaction and Osteopathic Manipulative Treatment Examination Performance?

PubMed

Seals, Ryan; Gustowski, Sharon M; Kominski, Carol; Li, Feiming

2016-11-01

Instructional videos for osteopathic manipulative treatment (OMT) are a potentially valuable resource for novice learners. To evaluate student experiences and the effectiveness of instructional videos in lieu of live faculty demonstration in a second-year osteopathic manipulative medicine course. Faculty created and produced written instructions and videos for selected Still and facilitated positional release techniques. These materials incorporated curricular design principles and psychomotor skills development strategies. During a second-year OMT skills laboratory session, students used the videos as the primary source for technique demonstration and instruction. Table trainers monitored and assisted students per their request or if errors were observed. Students completed surveys regarding their previous experiences in the OMT skills laboratory sessions (presession survey) and the video-based instructional one (postsession survey). One month after the survey, students were also asked to complete a postexamination survey. Student scores on the skills competency examination were compared with scores from the previous year. Of the 230 students, 162 (70%), 135 (59%), and 86 (37%) responded to the presession, postsession, and postexamination surveys, respectively. The majority of students indicated that the OMT videos helped them feel more prepared (98%) and more confident for their examination (78%), were a valuable addition to learning (97%), and would help increase confidence in using osteopathic manipulative medicine on patients (84%). Two-thirds of students indicated that the videos were superior to faculty demonstration from the stage. Compared with students from the previous year, no statistically significant improvement was noted on the total clinical competency examination scores. The faculty-created videos for teaching OMT techniques did not improve scores on the clinical competency examination but had subjective benefits as part of the OMT laboratory sessions. Instructional videos can serve as an alternative to live demonstration to allow more time in the laboratory for assessment and feedback.

Minimally Invasive Mitral Valve Procedures: The Current State

PubMed Central

Ritwick, Bhuyan; Chaudhuri, Krishanu; Crouch, Gareth; Edwards, James R. M.; Worthington, Michael; Stuklis, Robert G.

2013-01-01

Since its early days, cardiac surgery has typically involved large incisions with complete access to the heart and the great vessels. After the popularization of the minimally invasive techniques in general surgery, cardiac surgeons began to experiment with minimal access techniques in the early 1990s. Although the goals of minimally invasive cardiac surgery (MICS) are fairly well established as decreased pain, shorter hospital stay, accelerated recuperation, improved cosmesis, and cost effectiveness, a strict definition of minimally invasive cardiac surgery has been more elusive. Minimally invasive cardiac surgery started with mitral valve procedures and then gradually expanded towards other valve procedures, coronary artery bypass grafting, and various types of simple congenital heart procedures. In this paper, the authors attempt to focus on the evolution, techniques, results, and the future perspective of minimally invasive mitral valve surgery (MIMVS). PMID:24382998

[Endoscopically assisted fronto-orbitary correction in trigonocephaly].

PubMed

Hinojosa, J; Esparza, J; García-Recuero, I; Romance, A

2007-01-01

The development of multidisciplinar Units for Craneofacial Surgery has led to a considerable decrease in morbidity even in the cases of more complex craniofacial syndromes. The use of minimally invasive techniques for the correction of some of these malformations allows the surgeon to minimize the incidence of complications by means of a decrease in the surgical time, blood salvage and shortening of postoperative hospitalization in comparison to conventional craniofacial techniques. Simple and milder craniosynostosis are best approached by these techniques and render the best results. Different osteotomies resembling standard fronto-orbital remodelling besides simple suturectomies and the use of postoperative cranial orthesis may improve the final aesthetic appearence. In endoscopic treatment of trigonocephaly the use of preauricular incisions achieves complete pterional resection, lower lateral orbital osteotomies and successful precoronal frontal osteotomies to obtain long lasting and satisfactory outcomes.

Teaching motivational interviewing to first-year medical students to improve counseling skills in health behavior change.

PubMed

Poirier, Maria K; Clark, Matthew M; Cerhan, Jane H; Pruthi, Sandhya; Geda, Yonas E; Dale, Lowell C

2004-03-01

To examine the effectiveness of motivational interviewing training on improving medical students' knowledge of and confidence in their ability to counsel patients regarding health behavior change. In the spring of 2002, 42 first-year medical students participated in a counseling course on health behavior change. Three small groups focused on learning and practicing motivational interviewing techniques using brief lectures, interactive class activities, student role-plays, and simulated patients. Students completed an identical precourse and postcourse questionnaire that measured their confidence and knowledge regarding counseling skills in health behavior change. The medical students reported improved confidence in their understanding of motivational interviewing after participation in the course (very confident, 77%) compared with before the course (very confident, 2%). Each of the 8 confidence items were compared before and after the course using a signed rank test. All comparisons indicated a significant improvement (P < .001) in confidence. Regarding knowledge-based questions, students showed significant improvement; 31% of students answered all the questions correctly before the course, and 56% answered all the questions correctly after the course (P = .004). These results show that teaching motivational interviewing techniques to first-year medical students can enhance student confidence in and knowledge of providing counseling to patients regarding health behavior change.

Ontology Alignment Repair through Modularization and Confidence-Based Heuristics

PubMed Central

Santos, Emanuel; Faria, Daniel; Pesquita, Catia; Couto, Francisco M.

2015-01-01

Ontology Matching aims at identifying a set of semantic correspondences, called an alignment, between related ontologies. In recent years, there has been a growing interest in efficient and effective matching methods for large ontologies. However, alignments produced for large ontologies are often logically incoherent. It was only recently that the use of repair techniques to improve the coherence of ontology alignments began to be explored. This paper presents a novel modularization technique for ontology alignment repair which extracts fragments of the input ontologies that only contain the necessary classes and relations to resolve all detectable incoherences. The paper presents also an alignment repair algorithm that uses a global repair strategy to minimize both the degree of incoherence and the number of mappings removed from the alignment, while overcoming the scalability problem by employing the proposed modularization technique. Our evaluation shows that our modularization technique produces significantly small fragments of the ontologies and that our repair algorithm produces more complete alignments than other current alignment repair systems, while obtaining an equivalent degree of incoherence. Additionally, we also present a variant of our repair algorithm that makes use of the confidence values of the mappings to improve alignment repair. Our repair algorithm was implemented as part of AgreementMakerLight, a free and open-source ontology matching system. PMID:26710335

Ontology Alignment Repair through Modularization and Confidence-Based Heuristics.

PubMed

Santos, Emanuel; Faria, Daniel; Pesquita, Catia; Couto, Francisco M

2015-01-01

Ontology Matching aims at identifying a set of semantic correspondences, called an alignment, between related ontologies. In recent years, there has been a growing interest in efficient and effective matching methods for large ontologies. However, alignments produced for large ontologies are often logically incoherent. It was only recently that the use of repair techniques to improve the coherence of ontology alignments began to be explored. This paper presents a novel modularization technique for ontology alignment repair which extracts fragments of the input ontologies that only contain the necessary classes and relations to resolve all detectable incoherences. The paper presents also an alignment repair algorithm that uses a global repair strategy to minimize both the degree of incoherence and the number of mappings removed from the alignment, while overcoming the scalability problem by employing the proposed modularization technique. Our evaluation shows that our modularization technique produces significantly small fragments of the ontologies and that our repair algorithm produces more complete alignments than other current alignment repair systems, while obtaining an equivalent degree of incoherence. Additionally, we also present a variant of our repair algorithm that makes use of the confidence values of the mappings to improve alignment repair. Our repair algorithm was implemented as part of AgreementMakerLight, a free and open-source ontology matching system.

A Laboratory Manual for Stepwise Cerebral White Matter Fiber Dissection.

PubMed

Koutsarnakis, Christos; Liakos, Faidon; Kalyvas, Aristotelis V; Sakas, Damianos E; Stranjalis, George

2015-08-01

White matter fiber dissection is an important method in acquiring a thorough neuroanatomic knowledge for surgical practice. Previous studies have definitely improved our understanding of intrinsic brain anatomy and emphasized on the significance of this technique in modern neurosurgery. However, current literature lacks a complete and concentrated laboratory guide about the entire dissection procedure. Hence, our primary objective is to introduce a detailed laboratory manual for cerebral white matter dissection by highlighting consecutive dissection steps, and to stress important technical comments facilitating this complex procedure. Twenty adult, formalin-fixed cerebral hemispheres were included in the study. Ten specimens were dissected in the lateromedial and 10 in the mediolateral direction, respectively, using the fiber dissection technique and the microscope. Eleven and 8 consecutive and distinctive dissection steps are recommended for the lateromedial and mediolateral dissection procedures, respectively. Photographs highlighting various anatomic landmarks accompany every step. Technical recommendations, facilitating the dissection process, are also indicated. The fiber dissection technique, although complex and time consuming, offers a three-dimensional knowledge of intrinsic brain anatomy and architecture, thus improving both the quality of microneurosurgery and the patient's standard of care. The present anatomic study provides a thorough dissection manual to those who study brain anatomy using this technique. Copyright © 2015 Elsevier Inc. All rights reserved.

Methodology of shooting training using modern IT techniques

NASA Astrophysics Data System (ADS)

Gudzbeler, Grzegorz; Struniawski, Jarosław

2017-08-01

Mastering, improvement, shaping and preservation of skills of safe, efficient and effective use of the firearm requires the use of relevant methodology of conducting the shooting training. However reality of police trainings does not usually allow for intensive training shooting with the use of ammunition. An alternative solution is the use of modern training technologies. Example of this is the "Virtual system of improvement tactics of intervention services responsible for security and shooting training." Introduction of stimulator to police trainings will enable complete stuff preparation to achieve its tasks, creating potential of knowledge and experience in many areas, far exceeding the capabilities of conventional training.

Scheduling and rescheduling with iterative repair

NASA Technical Reports Server (NTRS)

Zweben, Monte; Davis, Eugene; Daun, Brian; Deale, Michael

1992-01-01

This paper describes the GERRY scheduling and rescheduling system being applied to coordinate Space Shuttle Ground Processing. The system uses constraint-based iterative repair, a technique that starts with a complete but possibly flawed schedule and iteratively improves it by using constraint knowledge within repair heuristics. In this paper we explore the tradeoff between the informedness and the computational cost of several repair heuristics. We show empirically that some knowledge can greatly improve the convergence speed of a repair-based system, but that too much knowledge, such as the knowledge embodied within the MIN-CONFLICTS lookahead heuristic, can overwhelm a system and result in degraded performance.

Langley Research Center's Unitary Plan Wind Tunnel: Testing Capabilities and Recent Modernization Activities

NASA Technical Reports Server (NTRS)

Micol, John R.

2001-01-01

Description, capabilities, initiatives, and utilization of the NASA Langley Research Center's Unitary Plan Wind Tunnel are presented. A brief overview of the facility's operational capabilities and testing techniques is provided. A recent Construction of Facilities (CoF) project to improve facility productivity and efficiency through facility automation has been completed and is discussed. Several new and maturing thrusts are underway that include systematic efforts to provide credible assessment for data quality, modifications to the new automation control system for increased compatibility with the Modern Design Of Experiments (MDOE) testing methodology, and process improvements for better test coordination, planning, and execution.

Langley Research Center's Unitary Plan Wind Tunnel: Testing Capabilities and Recent Modernization Activities

NASA Technical Reports Server (NTRS)

Micol, John R.

2001-01-01

Description, capabilities, initiatives, and utilization of the NASA Langley Research Center's Unitary Plan Wind Tunnel are presented. A brief overview of the facility's operational capabilities and testing techniques is provided. A recent Construction of Facilities (Car) project to improve facility productivity and efficiency through facility automation has been completed and is discussed. Several new and maturing thrusts are underway that include systematic efforts to provide credible assessment for data quality, modifications to the new automation control system for increased compatibility with the Modern Design of Experiments (MDOE) testing methodology, and process improvements for better test coordination, planning, and execution.

Space crew radiation exposure analysis system based on a commercial stand-alone CAD system

NASA Technical Reports Server (NTRS)

Appleby, Matthew H.; Golightly, Michael J.; Hardy, Alva C.

1992-01-01

Major improvements have recently been completed in the approach to spacecraft shielding analysis. A Computer-Aided Design (CAD)-based system has been developed for determining the shielding provided to any point within or external to the spacecraft. Shielding analysis is performed using a commercially available stand-alone CAD system and a customized ray-tracing subroutine contained within a standard engineering modeling software package. This improved shielding analysis technique has been used in several vehicle design projects such as a Mars transfer habitat, pressurized lunar rover, and the redesigned Space Station. Results of these analyses are provided to demonstrate the applicability and versatility of the system.

Thermal and Structural Analysis of Helicopter Transmission Housings Using NASTRAN

NASA Technical Reports Server (NTRS)

Howells, R. W.; Sciarra, J. J.; Ng, G. S.

1976-01-01

The application of NASTRAN to improve the design of helicopter transmission housings is described. A finite element model of the complete forward rotor transmission housing for the Boeing Vertol CH-47C helicopter was used to study thermal distortion and stress, stress and deflection due to static and dynamic loads, load paths, and design optimization by the control of structural energy distribution. The analytical results are correlated with test data and used to reduce weight and to improve strength, service life, failsafety, and reliability. The techniques presented, although applied herein to helicopter transmissions, are sufficiently general to be applicable to any power transmission system.

Conventional Complete Denture in Patients with Ectodermal Dysplasia

PubMed Central

Vilanova, Larissa Soares Reis; Sánchez-Ayala, Alfonso; Ribeiro, Giselle Rodrigues; Campos, Camila Heitor; Farias-Neto, Arcelino

2015-01-01

Ectodermal dysplasia is described as heritable conditions that involve anomalies of structures derived from the ectoderm, including hypodontia. In the cases of edentulous young patients, who did not finish their craniofacial growth, treatment with conventional complete denture is a suitable alternative. The aim of this study was to report a case of mandibular edentulism treated with conventional complete denture in a thirteen-year-old patient diagnosed with hidrotic ectodermal dysplasia. Typical features, such as frontal bossing, depressed nasal bridge, protuberant lips, scarce hair, and brittle nails, were visualized during the extraoral examination. The intraoral inspection and radiographic analysis revealed oligodontia, dental malformation, and prolonged retention of deciduous teeth at maxilla and total edentulism at mandible. A conventional complete denture was planned and constructed following the same steps of technique as recommended in adults. Although this option is not a definitive treatment, the patient and his parents were satisfied with his improvement in chewing and speech, as well as with the aesthetic benefits. PMID:26425372

Return to Sport after ACL Surgery: A Comparison between Two Different Reconstructive Techniques.

PubMed

Baldassarri, Matteo; Perazzo, Luca; Ghinelli, Diego; Ricciarelli, Marco; Pilla, Federico; Buda, Roberto

2018-05-23

The anterior cruciate ligament reconstruction (ACLR) has become a very common surgical procedure. One of the main success indicators of the surgical procedure is the return to preinjury sporting level. In recent years, reconstructive techniques have been geared toward less morbidity and optimized ligaments process to speed up the recovery of sports activity. This study compares clinical and imaging data, to evaluate the timing of return to sport, of two populations undergoing ACLR using two different techniques: ACLR with hamstring maintaining tibial insertion (MHG) and an all-inside technique with complete hamstring detachment (DHG). Patients were clinically evaluated with Marx rating scale, International Knee Documentation Committee (IKDC) score, and Tegner activity scale at a minimum follow-up (FU) of 4 years. The two groups have homogeneous characteristics: age, sex, type, and level of sports activity. Since November 2012, 59 patients with unilateral ACL insufficiency underwent ACLR: 31 patients using the MHG technique and 28 patients using the DHG technique. In both groups, a significant improvement in the clinical scores of the administered tests was observed. The MHG group reported a higher percentage of normal knees (83.8%) compared with the DHG group (78.6%). IKDC subjective score improved at each FU. Comparing the two techniques, at 12 months' FU the MHG group achieved better IKDC results (89.6) compared with the DHG technique (84.2). Marx and Tegner score values improved over time reaching comparable results at final FU. At final FU, 98% of patients returned to the same preinjury professional sporting level. Both techniques have been able to provide good clinical results. The MHG group, however, had a resumption of sports activity of the same level and intensity slightly longer (6.3 months) than that in the DHG group (5.9 months). Furthermore, the resumption of training and athletic gestures for the type of sport practiced was earlier than the DHG group. However, in the long run the level of sporting activity leveled in both groups, demonstrating the effectiveness of both techniques. Thieme Medical Publishers 333 Seventh Avenue, New York, NY 10001, USA.

Use of linkage to improve the completeness of the SIM and SINASC in the Brazilian capitals

PubMed Central

Maia, Lívia Teixeira de Souza; de Souza, Wayner Vieira; Mendes, Antonio da Cruz Gouveia; da Silva, Aline Galdino Soares

2017-01-01

ABSTRACT OBJECTIVE To analyze the contribution of linkage between databases of live births and infant mortality to improve the completeness of the variables common to the Mortality Information System (SIM) and the Live Birth Information System (SINASC) in Brazilian capitals in 2012. METHODS We studied 9,001 deaths of children under one year registered in the SIM in 2012 and 1,424,691 live births present in the SINASC in 2011 and 2012. The databases were related with linkage in two steps – deterministic and probabilistic. We calculated the percentage of incompleteness of the variables common to the SIM and SINASC before and after using the technique. RESULTS We could relate 90.8% of the deaths to their respective declarations of live birth, most of them paired deterministically. We found a higher percentage of pairs in Porto Alegre, Curitiba, and Campo Grande. In the capitals of the North region, the average of pairs was 84.2%; in the South region, this result reached 97.9%. The 11 variables common to the SIM and SINASC had 11,278 incomplete fields cumulatively, and we could recover 91.4% of the data after linkage. Before linkage, five variables presented excellent completeness in the SINASC in all Brazilian capitals, but only one variable had the same status in the SIM. After applying this technique, all 11 variables of the SINASC became excellent, while this occurred in seven variables of the SIM. The city of birth was significantly associated with the death component in the quality of the information. CONCLUSIONS Despite advances in the coverage and quality of the SIM and SINASC, problems in the completeness of the variables can still be identified, especially in the SIM. In this perspective, linkage can be used to qualify important information for the analysis of infant mortality. PMID:29211201

Novel Augmentation Technique for Patellar Tendon Repair Improves Strength and Decreases Gap Formation: A Cadaveric Study.

PubMed

Black, James C; Ricci, William M; Gardner, Michael J; McAndrew, Christopher M; Agarwalla, Avinesh; Wojahn, Robert D; Abar, Orchid; Tang, Simon Y

2016-12-01

Patellar tendon ruptures commonly are repaired using transosseous patellar drill tunnels with modified-Krackow sutures in the patellar tendon. This simple suture technique has been associated with failure rates and poor clinical outcomes in a modest proportion of patients. Failure of this repair technique can result from gap formation during loading or a single catastrophic event. Several augmentation techniques have been described to improve the integrity of the repair, but standardized biomechanical evaluation of repair strength among different techniques is lacking. The purpose of this study was to describe a novel figure-of-eight suture technique to augment traditional fixation and evaluate its biomechanical performance. We hypothesized that the augmentation technique would (1) reduce gap formation during cyclic loading and (2) increase the maximum load to failure. Ten pairs (two male, eight female) of fresh-frozen cadaveric knees free of overt disorders or patellar tendon damage were used (average donor age, 76 years; range, 65-87 years). For each pair, one specimen underwent the standard transosseous tunnel suture repair with a modified-Krackow suture technique and the second underwent the standard repair with our experimental augmentation method. Nine pairs were suitable for testing. Each specimen underwent cyclic loading while continuously measuring gap formation across the repair. At the completion of cyclic loading, load to failure testing was performed. A difference in gap formation and mean load to failure was seen in favor of the augmentation technique. At 250 cycles, a 68% increase in gap formation was seen for the control group (control: 5.96 ± 0.86 mm [95% CI, 5.30-6.62 mm]; augmentation: 3.55 ± 0.56 mm [95% CI, 3.12-3.98 mm]; p = 0.02). The mean load to failure was 13% greater in the augmentation group (control: 899.57 ± 96.94 N [95% CI, 825.06-974.09 N]; augmentation: 1030.70 ± 122.41 N [95% CI, 936.61-1124.79 N]; p = 0.01). This biomechanical study showed improved performance of a novel augmentation technique compared with the standard repair, in terms of reduced gap formation during cyclic loading and increased maximum load to failure. Decreased gap formation and higher load to failure may improve healing potential and minimize failure risk. This study shows a potential biomechanical advantage of the augmentation technique, providing support for future clinical investigations comparing this technique with other repair methods that are in common use such as transosseous suture repair.

Use of autologous platelet-rich plasma in complete cleft palate repair.

PubMed

El-Anwar, Mohammad Waheed; Nofal, Ahmed Abdel Fattah; Khalifa, Mohamed; Quriba, Amal Saeed

2016-07-01

Evaluate the effect of topical application of autologous platelet-rich plasma (PRP) in primary repair of complete cleft palate and then compare the result with another group of patients using the same surgical technique, without application of PRP with regard to the incidence of oronasal fistula, velopharyngeal closure, and grade of nasality. Case control study. This study was carried on 44 children with complete cleft palate with age range from 12 to 23 months. The children were divided into two age- and gender-matched groups: All children were subjected to the same technique of V-Y pushback repair of the complete cleft palate. In group A (22 children), the PRP prepared from the patient was topically applied between the nasal and oral mucosa layer during palatoplasty, whereas in group B (22 children) the PRP was not applied. All cases were recovered smoothly without problems. In group A, no oronasal fistula was reported, whereas in group B three patients (13.6%) had postoperative fistulae and two patients (9.1%) needed revision palatoplasty. At 6 months postoperative assessment, group A (with PRP application) showed significantly better grade of nasality (P = 0.024) and better endoscopic velopharyngeal closure (P = 0.016) than group B. Usage of autologous PRP in complete cleft palate repair is simple; effective; can decrease the incidence of oronasal fistula; and also significantly improves the grade of nasality and velopharyngeal closure, which decreases the need of further surgical intervention in cleft palate patients. 3b. Laryngoscope, 126:1524-1528, 2016. © 2016 The American Laryngological, Rhinological and Otological Society, Inc.

Restoration of horizontal stability in complete acromioclavicular joint separations: surgical technique and preliminary results.

PubMed

Li, Haoqing; Wang, Chuanshun; Wang, Jiandong; Wu, Kai; Hang, Donghua

2013-11-13

Our purpose was to investigate the clinical efficacy of arthroscope-assisted acromioclavicular ligament reconstruction in combination with double endobutton coracoclavicular ligament reconstruction for the treatment of complete acromioclavicular joint dislocation. During the period from February 2010 to October 2012, ten patients with Rockwood types IV and V acromioclavicular joint dislocation were hospitalized and nine were treated with acromioclavicular ligament reconstruction combined with double endobutton of coracoclavicular ligament reconstruction. The improvement in shoulder functions was assessed using a Constant score and visual analog scale (VAS) system. The mean follow-up period was 33.6 ± 5.4 months. The mean Constant scores improved from 25.2 ± 6.6 preoperatively to 92.4 ± 6.5 postoperatively, while the mean VAS score decreased from 5.9 ± 1.4 to 1.2 ± 0.9; significant differences were observed. The final follow-up revealed that excellent outcomes were achieved in eight patients and good outcome in two patients. Arthroscope-assisted acromioclavicular ligament reconstruction in combination with double endobutton of coracoclavicular ligament reconstruction is an effective approach for treatment of acute complete acromioclavicular joint dislocation.

Restoration of horizontal stability in complete acromioclavicular joint separations: surgical technique and preliminary results

PubMed Central

2013-01-01

Background Our purpose was to investigate the clinical efficacy of arthroscope-assisted acromioclavicular ligament reconstruction in combination with double endobutton coracoclavicular ligament reconstruction for the treatment of complete acromioclavicular joint dislocation. Methods During the period from February 2010 to October 2012, ten patients with Rockwood types IV and V acromioclavicular joint dislocation were hospitalized and nine were treated with acromioclavicular ligament reconstruction combined with double endobutton of coracoclavicular ligament reconstruction. The improvement in shoulder functions was assessed using a Constant score and visual analog scale (VAS) system. Results The mean follow-up period was 33.6 ± 5.4 months. The mean Constant scores improved from 25.2 ± 6.6 preoperatively to 92.4 ± 6.5 postoperatively, while the mean VAS score decreased from 5.9 ± 1.4 to 1.2 ± 0.9; significant differences were observed. The final follow-up revealed that excellent outcomes were achieved in eight patients and good outcome in two patients. Conclusion Arthroscope-assisted acromioclavicular ligament reconstruction in combination with double endobutton of coracoclavicular ligament reconstruction is an effective approach for treatment of acute complete acromioclavicular joint dislocation. PMID:24225119

Vertical Skin Paddle Orientation for the Latissimus Dorsi Flap in Breast Reconstruction: A Modification to Simultaneously Correct Inferior Pole Constriction and Improve Projection.

PubMed

Fracol, Megan; Grim, Michelle; Lanier, Steven T; Fine, Neil A

2018-03-01

The latissimus dorsi myocutaneous flap is a reliable and frequently used option to bring vascularized skin and soft tissue to improve the stability and aesthetic result in breast reconstruction. Standard techniques with skin paddle inset in a horizontal or oblique fashion preferentially improve anterior projection (when inset at the mastectomy scar) or lower pole and inframammary fold constriction (when inset into the inframammary fold). Here, the authors describe a modification for inset of the latissimus dorsi myocutaneous flap that improves both anterior projection and lower pole/inframammary fold constriction, and also allows the latissimus muscle to fan out and provide complete implant coverage. The vertical inset modification brings new skin and soft tissue into both the inferior pole and the central mastectomy scar, allowing simultaneous improvement in both areas and full use of the latissimus muscle to cover the implant or expander. Therapeutic, IV.

Software attribute visualization for high integrity software

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pollock, G.M.

1998-03-01

This report documents a prototype tool developed to investigate the use of visualization and virtual reality technologies for improving software surety confidence. The tool is utilized within the execution phase of the software life cycle. It provides a capability to monitor an executing program against prespecified requirements constraints provided in a program written in the requirements specification language SAGE. The resulting Software Attribute Visual Analysis Tool (SAVAnT) also provides a technique to assess the completeness of a software specification.

Integrating long-offset transient electromagnetics (LOTEM) with seismics in an exploration environment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Strack, K.M.; Vozoff, K.

The applications of electromagnetics have increased in the past two decades because of an improved understanding of the methods, improves service availability, and the increased focus of exploration in the more complex reservoir characterization issues. For electromagnetic methods surface applications for hydrocarbon Exploration and Production are still a special case, while applications in borehole and airborne research and for engineering and environmental objectives are routine. In the past, electromagnetic techniques, in particular deep transient electromagnetics, made up a completely different discipline in geophysics, although many of the principles are similar to the seismic one. With an understanding of the specificmore » problems related to data processing initially and then acquisition, the inclusion of principles learned from seismics happened almost naturally. Initially, the data processing was very similar to seismic full-waveform processing. The hardware was also changed to include multichannel acquisition systems, and the field procedures became very similar to seismic surveying. As a consequence, the integration and synergism of the interpretation process is becoming almost automatic. The long-offset transient electromagnetic (LOTEM) technique will be summarized from the viewpoint of its similarity to seismics. The complete concept of the method will also be reviewed. An interpretation case history that integrates seismic and LOTEM from a hydrocarbon area in China clearly demonstrates the limitations and benefits of the method.« less

Effects of competitive learning tools on medical students: A case study

PubMed Central

2018-01-01

Objective Competitive learning techniques are being successfully used in courses of different disciplines. However, there is still a significant gap in analyzing their effects in medical students competing individually. The authors conducted this study to assess the effectiveness of the use of a competitive learning tool on the academic achievement and satisfaction of medical students. Methods The authors collected data from a Human Immunology course in medical students (n = 285) and conducted a nonrandomized (quasi-experimental) control group pretest-posttest design. They used the Mann-Whitney U-test to measure the strength of the association between two variables and to compare the two student groups. Results The improvement and academic outcomes of the experimental group students were significantly higher than those of the control group students. The students using the competitive learning tool had better academic performance, and they were satisfied with this type of learning. The study, however, had some limitations. The authors did not make a random assignment to the control and experimental groups and the groups were not completely homogenous. Conclusion The use of competitive learning techniques motivates medical students, improves their academic outcomes and may foster the cooperation among students and provide a pleasant classroom environment. The authors are planning further studies with a more complete evaluation of cognitive learning styles or incorporating chronometry as well as team-competition. PMID:29518123

Airway management of patients with traumatic brain injury/C-spine injury

PubMed Central

2015-01-01

Traumatic brain injury (TBI) is usually combined with cervical spine (C-spine) injury. The possibility of C-spine injury is always considered when performing endotracheal intubation in these patients. Rapid sequence intubation is recommended with adequate sedative or analgesics and a muscle relaxant to prevent an increase in intracranial pressure during intubation in TBI patients. Normocapnia and mild hyperoxemia should be maintained to prevent secondary brain injury. The manual-in-line-stabilization (MILS) technique effectively lessens C-spine movement during intubation. However, the MILS technique can reduce mouth opening and lead to a poor laryngoscopic view. The newly introduced video laryngoscope can manage these problems. The AirWay Scope® (AWS) and AirTraq laryngoscope decreased the extension movement of C-spines at the occiput-C1 and C2-C4 levels, improving intubation conditions and shortening the time to complete tracheal intubation compared with a direct laryngoscope. The Glidescope® also decreased cervical movement in the C2-C5 levels during intubation and improved vocal cord visualization, but a longer duration was required to complete intubation compared with other devices. A lightwand also reduced cervical motion across all segments. A fiberoptic bronchoscope-guided nasal intubation is the best method to reduce cervical movement, but a skilled operator is required. In conclusion, a video laryngoscope assists airway management in TBI patients with C-spine injury. PMID:26045922

One-stage Reconstruction of Soft Tissue Defects with the Sandwich Technique: Collagen-elastin Dermal Template and Skin Grafts

PubMed Central

Wollina, Uwe

2011-01-01

Background: A full-thickness soft tissue defect closure often needs complex procedures. The use of dermal templates can be helpful in improving the outcome. Objective: The objective was to evaluate a sandwich technique combining the dermal collagen–elastin matrix with skin grafts in a one-stage procedure. Materials and Methods: Twenty-three patients with 27 wounds were enrolled in this prospective single-centre observational study. The mean age was 74.8 ± 17.2 years. Included were full-thickness defects with exposed bone, cartilage and/ or tendons. The dermal collagen–elastin matrix was applied onto the wound bed accomplished by skin transplants, i.e. ‘sandwich’ transplantation. In six wounds, the transplants were treated with intermittent negative pressure therapy. Results: The size of defects was ≤875 cm2. The use of the dermal template resulted in a complete and stable granulation in 100% of wounds. Seventeen defects showed a complete closure and 19 achieved a complete granulation with an incomplete closure. There was a marked pain relief. No adverse events were noted due to the dermal template usage. Conclusions: Sandwich transplantation with the collagen–elastin matrix is a useful tool when dealing with full-thickness soft tissue defects with exposed bone, cartilage or tendons. PMID:22279382

Implementation and evaluation of a dilation and evacuation simulation training curriculum.

PubMed

York, Sloane L; McGaghie, William C; Kiley, Jessica; Hammond, Cassing

2016-06-01

To evaluate obstetrics and gynecology resident physicians' performance following a simulation curriculum on dilation and evacuation (D&E) procedures. This study included two phases: simulation curriculum development and resident physician performance evaluation following training on a D&E simulator. Trainees participated in two evaluations. Simulation training evaluated participants performing six cases on a D&E simulator, measuring procedural time and a 26-step checklist of D&E steps. The operative training portion evaluated residents' performance after training on the simulator using mastery learning techniques. Intra-operative evaluation was based on a 21-step checklist score, Objective Structured Assessment of Technical Skills (OSATS), and percentage of cases completed. Twenty-two residents participated in simulation training, demonstrating improved performance from cases one and two to cases five and six, as measured by checklist score and procedural time (p<.001 and p=.001, respectively). Of 10 participants in the operative training, all performed at least three D&Es, while seven performed at least six cases. While checklist scores did not change significantly from the first to sixth case (mean for first case: 18.3; for sixth case: 19.6; p=.593), OSATS ratings improved from case one (19.7) to case three (23.5; p=.001) and to case six (26.8; p=.005). Trainees completed approximately 71.6% of their first case (range: 21.4-100%). By case six, the six participants performed 81.2% of the case (range: 14.3-100%). D&E simulation using a newly-developed uterine model and simulation curriculum improves resident technical skills. Simulation training with mastery learning techniques transferred to high level of performance in OR using checklist. The OSATS measured skills and showed improvement in performance with subsequent cases. Implementation of a D&E simulation curriculum offers potential for improved surgical training and abortion provision. Copyright © 2016 Elsevier Inc. All rights reserved.

A manual physical therapy intervention for symptoms of knee osteoarthritis and associated fall risk: A case series of four patients.

PubMed

Allen, Chris; Sheehan, Riley; Deyle, Gail; Wilken, Jason; Gill, Norman

2018-02-26

Patients with knee osteoarthritis (OA) are at an increased risk of falling. Further, the symptoms associated with knee OA are correlated with fall risk. A manual physical therapy (MPT) approach consisting of mobilizing techniques and reinforcing exercise improves the symptoms and functional limitations associated with knee OA. The purpose of this case series is to evaluate an MPT intervention of mobilization techniques and exercise for knee OA on improving symptoms and quantify the secondary benefit of improving stumble recovery. Four patients with symptomatic knee OA and four matched controls completed a fall risk assessment. Following 4 weeks of intervention, patients were reevaluated. Initial Western Ontario and McMaster Universities Arthritis Index (WOMAC) scores indicated notable symptoms and functional limitations in all patients. In addition, all patients displayed elevated fall risk and/or impaired stumble responses. Following 4 weeks of intervention, all patients reported meaningful reductions in all three WOMAC subscales and demonstrated improvements in at least two of the three fall risk measures. We identified potential connections between symptom relief in patients with knee OA, stumble response, and ultimately fall risk. The results suggest that MPT intervention designed to improve the signs and symptoms of knee OA may lead to a secondary benefit of improved gait stability and stumble response.

Micro-scale experimental study of Microbial-Induced Carbonate Precipitation (MICP) by using microfluidic devices

NASA Astrophysics Data System (ADS)

Wang, Y.; Soga, K.; DeJong, J. T.; Kabla, A.

2017-12-01

Microbial-induced carbonate precipitation (MICP), one of the bio-mineralization processes, is an innovative subsurface improvement technique for enhancing the strength and stiffness of soils, and controlling their hydraulic conductivity. These macro-scale engineering properties of MICP treated soils controlled by micro-scale factors of the precipitated carbonate, such as its content, amount and distribution in the soil matrix. The precipitation process itself is affected by bacteria amount, reaction kinetics, porous medium geometry and flow distribution in the soils. Accordingly, to better understand the MICP process at the pore scale a new experimental technique that can observe the entire process of MICP at the pore-scale was developed. In this study, a 2-D transparent microfluidic chip made of Polydimethylsiloxane (PDMS) representing the soil matrix was designed and fabricated. A staged-injection MICP treatment procedure was simulated inside the microfluidic chip while continuously monitored using microscopic techniques. The staged-injection MICP treatment procedure started with the injection of bacteria suspension, followed with the bacteria setting for attachment, and then ended with the multiple injections of cementation liquid. The main MICP processes visualized during this procedure included the bacteria transport and attachment during the bacteria injection, the bacteria attachment and growth during the bacteria settling, the bacteria detachment during the cementation liquid injection, the cementation development during the cementation liquid injection, and the cementation development after the completion of cementation liquid injection. It is suggested that the visualization of the main MICP processes using the microfluidic technique can improve understating of the fundamental mechanisms of MICP and consequently help improve the treatment technique for in situ implementation of MICP.

Pulsed dye laser double-pass treatment of patients with resistant capillary malformations.

PubMed

Rajaratnam, Ratna; Laughlin, Sharyn A; Dudley, Denis

2011-07-01

The pulsed dye laser is an effective and established treatment for port-wine stains and has become the generally accepted standard of care. However, in many cases, complete clearance cannot be achieved as a significant proportion of lesions become resistant to treatment. Multiple passes or pulse-stacking techniques have been used to improve the extent and rate of fading, but concerns over increased adverse effects have limited this clinical approach. In this work, a double-pass technique with the pulsed dye laser has been described, which may allow for increased depth of vascular injury, greater efficacy, and an acceptable risk profile. Our aim was to determine the efficacy and the rate of side-effects for a double-pass protocol with a pulsed dye laser (PDL) to treat patients previously treated with PDL and/or other laser modalities. A retrospective chart review was conducted of 26 patients treated with a minimum of three double-pass treatments alone, or in combination, with single pass conventional PDL. Almost half of the patients (n = 12) showed either a moderate or significant improvement in fading compared to pre-treatment photographs with the double-pass technique. In a further 12 patients, there was a mild improvement. In two patients, there was no change. Sixteen patients developed mild side-effects: blisters (n = 5), dry scabs (n = 11) and transient hyperpigmentation (n = 4). This preliminary experience suggests that a double-pass technique at defined intervals between the first and second treatment with PDL can further lighten some port-wine stains, which are resistant to conventional single-pass treatments. This technique may be a useful addition to the laser treatment of PWS and deserves further scrutiny with randomized prospective studies and histological analysis to confirm the increased depth of vascular injury.

A dissociation of objective and subjective workload measures in assessing the impact of speech controls in advanced helicopters

NASA Technical Reports Server (NTRS)

Vidulich, Michael A.; Bortolussi, Michael R.

1988-01-01

Among the new technologies that are expected to aid helicopter designers are speech controls. Proponents suggest that speech controls could reduce the potential for manual control overloads and improve time-sharing performance in environments that have heavy demands for manual control. This was tested in a simulation of an advanced single-pilot, scout/attack helicopter. Objective performance indicated that the speech controls were effective in decreasing the interference of discrete responses during moments of heavy flight control activity. However, subjective ratings indicated that the use of speech controls required extra effort to speak precisely and to attend to feedback. Although the operational reliability of speech controls must be improved, the present results indicate that reliable speech controls could enhance the time-sharing efficiency of helicopter pilots. Furthermore, the results demonstrated the importance of using multiple assessment techniques to completely assess a task. Neither the objective nor the subjective measures alone provided complete information. It was the contrast between the measures that was most informative.

Direct peroral cholangioscopy using an ultraslim upper endoscope for biliary lesions.

PubMed

Omuta, Shigefumi; Maetani, Iruru; Ukita, Takeo; Nambu, Tomoko; Gon, Katsushige; Shigoka, Hiroaki; Saigusa, Yoshinori; Saito, Michihiro

2014-02-01

The development of direct peroral cholangioscopy (DPOC) using an ultraslim endoscope simplifies biliary cannulation. The conventional techniques are cumbersome to perform and require advanced skills. The recent introduction of the guidewires and balloons has improved the therapeutic outcomes. Here we describe an effective and easier method for performing DPOC using an ultraslim upper endoscope. Indications for DPOC were the presence of stones on follow-up of patients who had previously undergone complete sphincteroplasty, including endoscopic sphincterotomy or endoscopic papillary large balloon dilatation. Fifteen patients underwent DPOC. An ultraslim endoscope was inserted perorally and was advanced into the major papilla. The ampulla of Vater was visualized by retroflexing the endoscope in the distal second portion of the duodenum, and then DPOC was performed using a wire-guided cannulation technique with an anchored intraductal balloon catheter. One patient failed in the treatment due to looping of the endoscope in the fornix of the stomach. Fourteen (93.3%) were successfully treated with our modified DPOC technique. Only one patient (6.7%) experienced an adverse event (pancreatitis) who responded well to conservative management. Residual stones of the common bile duct were completely removed in 3 patients. The modified method of DPOC is simple, safe and easy to access the bile duct.

Transfemoral implantation of an Edwards SAPIEN valve in a tricuspid bioprosthesis without fluoroscopic landmarks.

PubMed

Calvert, Patrick A; Himbert, Dominique; Brochet, Eric; Radu, Costin; Iung, Bernard; Hvass, Ulrik; Darondel, Jean-Marc; Depoix, Jean-Pol; Nataf, Patrick; Vahanian, Alec

2012-03-01

We describe the first report of an Edwards SAPIEN valve implanted in a tricuspid bioprosthesis from the femoral vein. We highlight the feasibility of this previously avoided approach and the techniques involved. A 61-year-old woman with multiple valve replacements for rheumatic heart disease presented with NHYA IV dyspnoea secondary to a severely stenosed tricuspid bioprosthesis. After failed aggressive medical therapy and surgical turn down, an Edwards SAPIEN XT valve was deployed in the tricuspid bioprosthesis via the right femoral vein. Adaptations to the standard transfemoral transcatheter aortic valve implantation (TAVI) technique included: (1) crossing the tricuspid bioprosthesis with a balloon floatation catheter; (2) temporary pacing wire in the coronary sinus rather than the right ventricle; (3) mounting of the SAPIEN XT valve in the reverse orientation to transfemoral TAVI; and (4) fine positioning of the final valve position pre-deployment by 3D transoesophageal echocardiography (3D TOE) alone due to complete radiolucency of the tricuspid bioprosthesis. The procedure was completed without complication and resulted in significant symptomatic improvement. Deployment of an Edwards SAPIEN valve in a tricuspid bioprosthesis via the femoral vein is feasible and, with careful adaptations to established TAVI techniques, can be performed without complications and with good clinical response.

A prospective, randomized comparison between single- and multiple-injection techniques for ultrasound-guided subgluteal sciatic nerve block.

PubMed

Yamamoto, Hiroto; Sakura, Shinichi; Wada, Minori; Shido, Akemi

2014-12-01

It is believed that local anesthetic injected to obtain circumferential spread around nerves produces a more rapid onset and successful blockade after some ultrasound-guided peripheral nerve blocks. However, evidence demonstrating this point is limited only to the popliteal sciatic nerve block, which is relatively easy to perform by via a high-frequency linear transducer. In the present study, we tested the hypothesis that multiple injections of local anesthetic to make circumferential spread would improve the rate of sensory and motor blocks compared with a single-injection technique for ultrasound-guided subgluteal sciatic nerve block, which is considered a relatively difficult block conducted with a low-frequency, curved-array transducer. Ninety patients undergoing knee surgery were divided randomly into 2 groups to receive the ultrasound-guided subgluteal approach to sciatic nerve block with 20 mL of 1.5% mepivacaine with epinephrine. For group M (the multiple-injection technique), the local anesthetic was injected to create circumferential spread around the sciatic nerve without limitation on the number of needle passes. For group S (the single-injection technique), the number of needle passes was limited to 1, and the local anesthetic was injected to create spread along the dorsal surface of the sciatic nerve, during which no adjustment of the needle tip was made. Sensory and motor blockade were assessed in double-blind fashion for 30 minutes after completion of the block. The primary outcome was sensory blockade of all sciatic components tested, including tibial, superficial peroneal, and sural nerves at 30 minutes after injection. Data from 86 patients (43 in each group) were analyzed. Block execution took more time for group M than group S. The proportion of patients with complete sensory blockade of all sciatic components at 30 minutes after injection was significantly larger for group M than group S (41.9% vs 16.3%, P = 0.018). Complete motor blockade of foot and toes extension also was observed more frequently in group M than in group S (67.4% vs 34.9%, P = 0.005 and 51.2% vs 25.6%, P = 0.027, respectively). When ultrasound-guided subgluteal sciatic nerve block is conducted, multiple injections of local anesthetic to make a circumferential spread around the sciatic nerve improve the rate of sensory and motor blocks compared with a single injection.

Slit-lamp technique of draining interface fluid following Descemet's stripping endothelial keratoplasty.

PubMed

Srinivasan, Sathish; Rootman, David S

2007-09-01

To describe a new slit-lamp technique for draining interface fluid to manage complete donor disc detachments following Descemet's stripping (automated) endothelial keratoplasty (DSEK/DSAEK). Interventional case series. Five DSEK/DSAEK patients presented on the first postoperative day with complete detachment of the donor lenticule. Slit-lamp biomicroscopy showed interface fluid preventing attachment of the donor disc to the host stromal bed. A new slit-lamp technique is described to drain the interface fluid. This technique involved completely filling the anterior chamber with an air bubble using a 30-gauge needle on a 3 ml syringe. Following this, a 0.12 forceps was used to open the inferior mid-peripheral corneal drainage slit to drain the interface fluid. This technique was successful in draining the interface fluid in all five patients, leading to immediate complete reattachment of the donor disc. Donor disc detachments following DSEK/DSAEK can be successfully managed by this slit-lamp technique of draining the interface fluid.

Integrated low-intensity biofeedback therapy in fecal incontinence: evidence that "good" in-home anal sphincter exercise practice makes perfect.

PubMed

Vasant, D H; Solanki, K; Balakrishnan, S; Radhakrishnan, N V

2017-01-01

Biofeedback therapy (BFT) is an established treatment for fecal incontinence (FI), with access often being restricted to tertiary centers due to resources and the perceived requirement for high-intensity regimes. However, the optimal regime remains unknown. We evaluated outcomes from our low-intensity integrated BFT program in a secondary care center. Outcomes of our BFT service for FI were evaluated retrospectively. Response was defined by ≥50% improvement in FI frequency from baseline or complete continence. Responders were compared to non-responders for factors including symptoms, manometry data, sphincter exercise technique and duration of practice, and the number and frequency of sessions. Where patients dropped out, outcomes and the reason for dropout were obtained retrospectively. Fecal incontinence patients (n=205, median 62 years, 72% female) attended a median (IQR) 3 (2) BFT sessions with 55 (36) days between visits. Overall, 146/205 (71%) responded with 97/205 (47%) achieving continence. Fecal incontinence frequency improved dramatically in completed cases (P=0.000). While non-response was associated with males (P=0.03) and dropout (P=0.000), "good" anal sphincter exercise technique (P=0.008) and longer in-home practice (P=0.007) and more sessions (P=0.04) were associated with response. Dropout rate was 80/205 (39%), with the reason for dropout being obtained in 80%. Despite low-intensity BFT, comparable outcomes to data from tertiary centers were achieved. Our data emphasize the importance of technique and in-home practice of anal sphincter exercises. Customizing BFT intensity based on predictive factors and encouraging in-home practice may optimize outcomes, reduce dropout rates, and rationalize resources. © 2016 John Wiley & Sons Ltd.

Using Rapid Improvement Events for Disaster After-Action Reviews: Experience in a Hospital Information Technology Outage and Response.

PubMed

Little, Charles M; McStay, Christopher; Oeth, Justin; Koehler, April; Bookman, Kelly

2018-02-01

The use of after-action reviews (AARs) following major emergency events, such as a disaster, is common and mandated for hospitals and similar organizations. There is a recurrent challenge of identified problems not being resolved and repeated in subsequent events. A process improvement technique called a rapid improvement event (RIE) was used to conduct an AAR following a complete information technology (IT) outage at a large urban hospital. Using RIE methodology to conduct the AAR allowed for the rapid development and implementation of major process improvements to prepare for future IT downtime events. Thus, process improvement methodology, particularly the RIE, is suited for conducting AARs following disasters and holds promise for improving outcomes in emergency management. Little CM , McStay C , Oeth J , Koehler A , Bookman K . Using rapid improvement events for disaster after-action reviews: experience in a hospital information technology outage and response. Prehosp Disaster Med. 2018;33(1):98-100.

SU-F-T-87: Comparison of Advanced Radiotherapy Techniques for Post- Mastectomy Breast Cancer Patients

DOE Office of Scientific and Technical Information (OSTI.GOV)

Heins, D; Zhang, R; Hogstrom, K

2016-06-15

Purpose: To determine if bolus electron conformal therapy (Bolus-ECT) combined with intensity modulated x-ray therapy (IMXT) and flattening filter free volumetric modulated arc therapy (FFF-VMAT (6x and 10x)) can maintain equal or better dose coverage than standard volumetric modulated arc therapy (Std-VMAT) while reducing doses to organs at risk (OARs). Methods: Bolus-ECT with IMXT, FFF-VMAT, and Std-VMAT treatment plans were produced for ten post-mastectomy radiotherapy (PMRT) patients previously treated at our clinic. The treatment plans were created on commercially available treatment planning system (TPS) and all completed treatment plans were reviewed and approved by a radiation oncologist. The plans weremore » evaluated based on planning target volume (PTV) coverage, tumor control probability (TCP), dose homogeneity index (DHI), conformity index (CI), and dose to organs at risk (OAR). Results: All techniques produced clinically acceptable PMRT plans. Overall, Bolus-ECT with IMXT exhibited higher maximum dose compared to all VMAT techniques. Bolus-ECT with IMXT and FFF-VMAT10x had slightly improved TCP over FFF-VMAT6x and Std-VMAT. However, all VMAT techniques showed improved CI and DHI over Bolus-ECT with IMXT. All techniques showed very similar mean lung dose. Bolus-ECT with IMXT exhibited a reduced mean heart dose over Std-VMAT. Both FFF-VMAT techniques had higher mean heart dose compared to Std-VMAT. In addition, Bolus-ECT with IMXT was able to reduce mean dose to the contralateral breast compared to Std-VMAT and both FFF-VMAT techniques had comparable but slightly reduced dose compared to Std-VMAT. Conclusion: This work has shown that Bolus-ECT with IMXT produces clinically acceptable plans while reducing OAR doses. Both FFF-VMAT techniques are comparable to Std-VMAT with slight improvements. Even though all VMAT techniques produce more homogenous and conformal dose distributions, Bolus-ECT with IMXT is a viable option for treating post-mastectomy patients possibly leading to reduced risks of normal tissue complications.« less

Data Imputation in Epistatic MAPs by Network-Guided Matrix Completion

PubMed Central

Žitnik, Marinka; Zupan, Blaž

2015-01-01

Abstract Epistatic miniarray profile (E-MAP) is a popular large-scale genetic interaction discovery platform. E-MAPs benefit from quantitative output, which makes it possible to detect subtle interactions with greater precision. However, due to the limits of biotechnology, E-MAP studies fail to measure genetic interactions for up to 40% of gene pairs in an assay. Missing measurements can be recovered by computational techniques for data imputation, in this way completing the interaction profiles and enabling downstream analysis algorithms that could otherwise be sensitive to missing data values. We introduce a new interaction data imputation method called network-guided matrix completion (NG-MC). The core part of NG-MC is low-rank probabilistic matrix completion that incorporates prior knowledge presented as a collection of gene networks. NG-MC assumes that interactions are transitive, such that latent gene interaction profiles inferred by NG-MC depend on the profiles of their direct neighbors in gene networks. As the NG-MC inference algorithm progresses, it propagates latent interaction profiles through each of the networks and updates gene network weights toward improved prediction. In a study with four different E-MAP data assays and considered protein–protein interaction and gene ontology similarity networks, NG-MC significantly surpassed existing alternative techniques. Inclusion of information from gene networks also allowed NG-MC to predict interactions for genes that were not included in original E-MAP assays, a task that could not be considered by current imputation approaches. PMID:25658751

Rupture after Previous Endovascular Aneurysm Repair due to Type IA Endoleak: Complete Endograft Preservation Is Feasible with Proximal Suturing, Aortic Neck Banding, and Sac Plication.

PubMed

Karkos, Christos D; Mitka, Maria; Pliatsios, Ioannis; Xanthopoulou, Efthalia; Giagtzidis, Ioakeim T; Papadimitriou, Christina T; Papazoglou, Konstantinos O

2018-05-01

Rupture of an abdominal aortic aneurysm (AAA) after previous endovascular repair (EVAR) may require endograft explantation and replacement with a prosthetic surgical graft. Recent reports have suggested that total endograft removal during late surgical conversion in the nonruptured setting may not be necessary and that preserving functional parts of the endograft may improve results. Similar techniques may be used for ruptured cases diminishing the magnitude of an already difficult and complex procedure. We describe the successful treatment of a ruptured AAA after previous EVAR with complete endograft preservation by combining transmural endograft fixation with sutures, proximal aortic neck banding, and sac plication. Copyright © 2018 Elsevier Inc. All rights reserved.

Interband coding extension of the new lossless JPEG standard

NASA Astrophysics Data System (ADS)

Memon, Nasir D.; Wu, Xiaolin; Sippy, V.; Miller, G.

1997-01-01

Due to the perceived inadequacy of current standards for lossless image compression, the JPEG committee of the International Standards Organization (ISO) has been developing a new standard. A baseline algorithm, called JPEG-LS, has already been completed and is awaiting approval by national bodies. The JPEG-LS baseline algorithm despite being simple is surprisingly efficient, and provides compression performance that is within a few percent of the best and more sophisticated techniques reported in the literature. Extensive experimentations performed by the authors seem to indicate that an overall improvement by more than 10 percent in compression performance will be difficult to obtain even at the cost of great complexity; at least not with traditional approaches to lossless image compression. However, if we allow inter-band decorrelation and modeling in the baseline algorithm, nearly 30 percent improvement in compression gains for specific images in the test set become possible with a modest computational cost. In this paper we propose and investigate a few techniques for exploiting inter-band correlations in multi-band images. These techniques have been designed within the framework of the baseline algorithm, and require minimal changes to the basic architecture of the baseline, retaining its essential simplicity.

Evaluation of Improved Pushback Forecasts Derived from Airline Ground Operations Data

NASA Technical Reports Server (NTRS)

Carr, Francis; Theis, Georg; Feron, Eric; Clarke, John-Paul

2003-01-01

Accurate and timely predictions of airline pushbacks can potentially lead to improved performance of automated decision-support tools for airport surface traffic, thus reducing the variability and average duration of costly airline delays. One factor which affects the realization of these benefits is the level of uncertainty inherent in the turn processes. To characterize this inherent uncertainty, three techniques are developed for predicting time-to-go until pushback as a function of available ground-time; elapsed ground-time; and the status (not-started/in-progress/completed) of individual turn processes (cleaning, fueling, etc.). These techniques are tested against a large and detailed dataset covering approximately l0(exp 4) real-world turn operations obtained through collaboration with Deutsche Lufthansa AG. Even after the dataset is filtered to obtain a sample of turn operations with minimal uncertainty, the standard deviation of forecast error for all three techniques is lower-bounded away from zero, indicating that turn operations have a significant stochastic component. This lower-bound result shows that decision-support tools must be designed to incorporate robust mechanisms for coping with pushback demand stochasticity, rather than treating the pushback demand process as a known deterministic input.

Hubble Servicing Challenges Drive Innovation of Shuttle Rendezvous Techniques

NASA Technical Reports Server (NTRS)

Goodman, John L.; Walker, Stephen R.

2009-01-01

Hubble Space Telescope (HST) servicing, performed by Space Shuttle crews, has contributed to what is arguably one of the most successful astronomy missions ever flown. Both nominal and contingency proximity operations techniques were developed to enable successful servicing, while lowering the risk of damage to HST systems, and improve crew safety. Influencing the development of these techniques were the challenges presented by plume impingement and HST performance anomalies. The design of both the HST and the Space Shuttle was completed before the potential of HST contamination and structural damage by shuttle RCS jet plume impingement was fully understood. Relative navigation during proximity operations has been challenging, as HST was not equipped with relative navigation aids. Since HST reached orbit in 1990, proximity operations design for servicing missions has evolved as insight into plume contamination and dynamic pressure has improved and new relative navigation tools have become available. Servicing missions have provided NASA with opportunities to gain insight into servicing mission design and development of nominal and contingency procedures. The HST servicing experiences and lessons learned are applicable to other programs that perform on-orbit servicing and rendezvous, both human and robotic.

New imaging systems in nuclear medicine. Final report, January 1, 1993--December 31, 1995

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1995-12-31

The aim of this program has been to improve the performance of positron emission tomography (PET) to achieve high resolution with high sensitivity. Towards this aim, the authors have carried out the following studies: (1) explored new techniques for detection of annihilation radiation including new detector materials and system geometries, specific areas that they have studied include--exploration of factors related to resolution and sensitivity of PET instrumentation including geometry, detection materials and coding, and the exploration of technique to improve the image quality by use of depth of interaction and increased sampling; (2) complete much of the final testing ofmore » PCR-II, an analog-coded cylindrical positron tomograph, developed and constructed during the current funding period; (3) developed the design of a positron microtomograph with mm resolution for quantitative studies in small animals, a single slice version of this device has been designed and studied by use of computer simulation; (4) continued and expanded the program of biological studies in animal models. Current studies have included imaging of animal models of Parkinson`s and Huntington`s disease and cancer. These studies have included new radiopharmaceuticals and techniques involving molecular biology.« less

Individualized Physical 3-dimensional Kidney Tumor Models Constructed From 3-dimensional Printers Result in Improved Trainee Anatomic Understanding.

PubMed

Knoedler, Margaret; Feibus, Allison H; Lange, Andrew; Maddox, Michael M; Ledet, Elisa; Thomas, Raju; Silberstein, Jonathan L

2015-06-01

To evaluate the effect of 3-dimensionally (3D) printed physical renal models with enhancing masses on medical trainee characterization, localization, and understanding of renal malignancy. Proprietary software was used to import standard computed tomography (CT) cross-sectional imaging into 3D printers to create physical models of renal units with enhancing renal lesions in situ. Six different models were printed from a transparent plastic resin; the normal parenchyma was printed in a clear, translucent plastic, with a red hue delineating the suspicious renal lesion. Medical students, who had completed their first year of training, were given an overview and tasked with completion of RENAL nephrometry scores, separately using CT imaging and 3D models. Trainees were also asked to complete a questionnaire about their experience. Variability between trainees was assessed by intraclass correlation coefficients (ICCs), and kappa statistics were used to compare the trainee to experts. Overall trainee nephrometry score accuracy was significantly improved with the 3D model vs CT scan (P <.01). Furthermore, 3 of the 4 components of the nephrometry score (radius, nearness to collecting system, and location) showed significant improvement (P <.001) using the models. There was also more consistent agreement among trainees when using the 3D models compared with CT scans to assess the nephrometry score (intraclass correlation coefficient, 0.28 for CT scan vs 0.72 for 3D models). Qualitative evaluation with questionnaires filled out by the trainees further confirmed that the 3D models improved their ability to understand and conceptualize the renal mass. Physical 3D models using readily available printing techniques improve trainees' understanding and characterization of individual patients' enhancing renal lesions. Published by Elsevier Inc.

Fractional CO2 Laser: From Skin Rejuvenation to Vulvo-Vaginal Reshaping.

PubMed

Filippini, Maurizio; Del Duca, Ester; Negosanti, Francesca; Bonciani, Diletta; Negosanti, Luca; Sannino, Mario; Cannarozzo, Giovanni; Nisticò, Steven Paul

2017-03-01

The CO 2 laser has become the gold standard treatment in dermatologic surgery for the treatment of a large number of skin and mucosal lesions. The introduction of the fractional micro-ablative technology represented an integration to the ablative resurfacing technique, reducing the healing time and the side effects. Vaginal rejuvenation performed with this technique is a minimally invasive procedure that stimulates internal tissues of the female lower genital tract to regenerate the mucosa, improving tissue trophism and restoring the correct functionality. In our experience, 386 menopausal women affected with vulvo-vaginal atrophy (VVA) were treated with three section of fractional micro-ablative CO 2 laser. After three treatments, patients reported a complete improvement of the symptoms (59.94% dryness, 56.26% burn, sensation, 48.75% dyspareunia, 56.37% itch, 73.15% soreness, and 48.79% vaginal introitus pain). Fractional micro-ablative CO 2 laser seems to reduce symptoms related to vaginal atrophy. The beneficial effects were reported just after the first session and confirmed 12 months after the last session.

Extracting Loop Bounds for WCET Analysis Using the Instrumentation Point Graph

NASA Astrophysics Data System (ADS)

Betts, A.; Bernat, G.

2009-05-01

Every calculation engine proposed in the literature of Worst-Case Execution Time (WCET) analysis requires upper bounds on loop iterations. Existing mechanisms to procure this information are either error prone, because they are gathered from the end-user, or limited in scope, because automatic analyses target very specific loop structures. In this paper, we present a technique that obtains bounds completely automatically for arbitrary loop structures. In particular, we show how to employ the Instrumentation Point Graph (IPG) to parse traces of execution (generated by an instrumented program) in order to extract bounds relative to any loop-nesting level. With this technique, therefore, non-rectangular dependencies between loops can be captured, allowing more accurate WCET estimates to be calculated. We demonstrate the improvement in accuracy by comparing WCET estimates computed through our HMB framework against those computed with state-of-the-art techniques.

Feasibility of ballistic strengthening exercises in neurologic rehabilitation.

PubMed

Williams, Gavin; Clark, Ross A; Hansson, Jessica; Paterson, Kade

2014-09-01

Conventional methods for strength training in neurologic rehabilitation are not task specific for walking. Ballistic strength training was developed to improve the functional transfer of strength training; however, no research has investigated this in neurologic populations. The aim of this pilot study was to evaluate the feasibility of applying ballistic principles to conventional leg strengthening exercises in individuals with mobility limitations as a result of neurologic injuries. Eleven individuals with neurologic injuries completed seated and reclined leg press using conventional and ballistic techniques. A 2 × 2 repeated-measures analysis of variance was used to compare power measures (peak movement height and peak velocity) between exercises and conditions. Peak jump velocity and peak jump height were greater when using the ballistic jump technique rather than the conventional concentric technique (P < 0.01). These findings suggest that when compared with conventional strengthening exercises, the incorporation of ballistic principles was associated with increased peak height and peak velocities.

A controlled trial of colostomy management by natural evacuation, irrigation and foam enema.

PubMed

Doran, J; Hardcastle, J D

1981-10-01

Twenty patients entered a prospective controlled trial of colostomy management by three techniques--natural evacuation, colostomy irrigation and foam enema. Every patient spent 2 months using each technique. The mean number of colostomy actions weekly was 17 during natural evacuation, 6 during irrigation and 10 with the enema. There was no significant difference in the time taken to manage the colostomy by each technique. Eighteen patients considered that both irrigation and the foam enema improved the quality of their life, and opted to continue with irrigation on completion of the study. There were no major complications during the trial but leakage of foam and an increase in flatus were problems with the foam enema. It is concluded that patients should be made aware of the alternative methods available for colostomy management and be encouraged to use the method of their choice.

Development of Gating Foils To Inhibit Ion Feedback Using FPC Production Techniques

NASA Astrophysics Data System (ADS)

Arai, D.; Ikematsu, K.; Sugiyama, A.; Iwamura, M.; Koto, A.; Katsuki, K.; Fujii, K.; Matsuda, T.

2018-02-01

Positive ion feedback from a gas amplification device to the drift region of the Time Projection Chamber for the ILC can deteriorate the position resolution. In order to inhibit the feedback ions, MPGD-based gating foils having good electron transmission have been developed to be used instead of the conventional wire gate. The gating foil needs to control the electric field locally in opening or closing the gate. The gating foil with a GEM (gas electron multiplier)-like structure has larger holes and smaller thickness than standard GEMs for gas amplification. It is known that the foil transmits over 80 % of electrons and blocks ions almost completely. We have developed the gating foils using flexible printed circuit (FPC) production techniques including an improved single-mask process. In this paper, we report on the production technique of 335 μm pitch, 12.5 μm thick gating foil with 80 % transmittance of electrons in ILC conditions.

In-line ATR-UV and Raman Spectroscopy for Monitoring API Dissolution Process During Liquid-Filled Soft-Gelatin Capsule Manufacturing.

PubMed

Wan, Boyong; Zordan, Christopher A; Lu, Xujin; McGeorge, Gary

2016-10-01

Complete dissolution of the active pharmaceutical ingredient (API) is critical in the manufacturing of liquid-filled soft-gelatin capsules (SGC). Attenuated total reflectance UV spectroscopy (ATR-UV) and Raman spectroscopy have been investigated for in-line monitoring of API dissolution during manufacturing of an SGC product. Calibration models have been developed with both techniques for in-line determination of API potency. Performance of both techniques was evaluated and compared. The ATR-UV methodology was found to be able to monitor the dissolution process and determine the endpoint, but was sensitive to temperature variations. The Raman technique was also capable of effectively monitoring the process and was more robust to the temperature variation and process perturbations by using an excipient peak for internal correction. Different data preprocessing methodologies were explored in an attempt to improve method performance.

Optimized feline vitrectomy technique for therapeutic stem cell delivery to the inner retina

PubMed Central

Jayaram, Hari; Becker, Silke; Eastlake, Karen; Jones, Megan F; Charteris, David G; Limb, G Astrid

2014-01-01

Objective To describe an optimized surgical technique for feline vitrectomy which reduces bleeding and aids posterior gel clearance in order to facilitate stem cell delivery to the inner retina using cellular scaffolds. Procedures Three-port pars plana vitrectomies were performed in six-specific pathogen-free domestic cats using an optimized surgical technique to improve access and minimize severe intraoperative bleeding. Results The surgical procedure was successfully completed in all six animals. Lens sparing vitrectomy resulted in peripheral lens touch in one of three animals but without cataract formation. Transient bleeding from sclerotomies, which was readily controlled, was seen in two of the six animals. No cases of vitreous hemorrhage, severe postoperative inflammation, retinal detachment, or endophthalmitis were observed during postoperative follow-up. Conclusions Three-port pars plana vitrectomy can be performed successfully in the cat in a safe and controlled manner when the appropriate precautions are taken to minimize the risk of developing intraoperative hemorrhage. This technique may facilitate the use of feline models of inner retinal degeneration for the development of stem cell transplantation techniques using cellular scaffolds. PMID:24661435

Phrenic nerve decompression for the management of unilateral diaphragmatic paralysis – preoperative evaluation and operative technique

PubMed Central

Hoshide, Reid; Brown, Justin

2017-01-01

Background: Unilateral diaphragmatic paralysis (UDP) can be a very disabling, typically causing shortness of breath and reduced exercise tolerance. We present a case of a surgical decompression of the phrenic nerve of a patient who presented with UDP, which occurred following cervical spine surgery. Methods: The workup for the etiology of UDP demonstrated paradoxical movement on “sniff test” and notably impaired pulmonary function tests. Seven months following the onset of the UDP, he underwent a surgical decompression of the phrenic nerve at the level of the anterior scalene. Results: He noted rapid symptomatic improvement following surgery and reversal of the above noted objective findings was documented. At his 4-year follow-up, he had complete resolution of his clinical symptoms. Repeated physiologic testing of his respiratory function had shown a complete reversal of his UDP. Conclusions: Anatomical compression of the phrenic nerve by redundant neck vasculature should be considered in the differential diagnosis of UDP. Here we demonstrated the techniques in workup and surgical management, with both subjective and objective evidence of success. PMID:29184705

Phrenic nerve decompression for the management of unilateral diaphragmatic paralysis - preoperative evaluation and operative technique.

PubMed

Hoshide, Reid; Brown, Justin

2017-01-01

Unilateral diaphragmatic paralysis (UDP) can be a very disabling, typically causing shortness of breath and reduced exercise tolerance. We present a case of a surgical decompression of the phrenic nerve of a patient who presented with UDP, which occurred following cervical spine surgery. The workup for the etiology of UDP demonstrated paradoxical movement on "sniff test" and notably impaired pulmonary function tests. Seven months following the onset of the UDP, he underwent a surgical decompression of the phrenic nerve at the level of the anterior scalene. He noted rapid symptomatic improvement following surgery and reversal of the above noted objective findings was documented. At his 4-year follow-up, he had complete resolution of his clinical symptoms. Repeated physiologic testing of his respiratory function had shown a complete reversal of his UDP. Anatomical compression of the phrenic nerve by redundant neck vasculature should be considered in the differential diagnosis of UDP. Here we demonstrated the techniques in workup and surgical management, with both subjective and objective evidence of success.

How we process trephine biopsy specimens: epoxy resin embedded bone marrow biopsies

PubMed Central

Krenacs, T; Bagdi, E; Stelkovics, E; Bereczki, L; Krenacs, L

2005-01-01

Improved cytomorphology of semithin resin sections over paraffin wax embedded sections may be important in diagnostic haematopathology. However, resin embedding can make immunohistochemical antigen detection or DNA isolation for clonal gene rearrangement assays difficult. This review describes the processing of bone marrow biopsies using buffered formaldehyde based fixation and epoxy resin embedding, with or without EDTA decalcification. Traditional semithin resin sections are completely rehydrated after etching in home made sodium methoxide solution. Resin elimination allows high resolution staining of tissue components with common histological stains. Efficient antigen retrieval and the Envision-HRP system permit the immunohistological detection of many antigens of diagnostic relevance, with retention of high quality cytomorphology. Furthermore, DNA can be extracted for clonality analysis. The technique can be completed within a similar time period to that of paraffin wax processing with only ∼30% increase in cost. This technique has been used for diagnosis in over 4000 bone marrow biopsies over the past 14 years. By meeting traditional and contemporary demands on the haematopathologist, it offers a powerful alternative to paraffin wax processing for diagnosis and research. PMID:16126867

Anatomic bifurcated reconstruction of chronic bilateral innominate-superior vena cava occlusion using the Y-stenting technique.

PubMed

Amin, Parth; Sharafuddin, Mel J; Laurich, Chad; Nicholson, Rachael M; Sun, Raphael C; Roh, Simon; Kresowik, Timothy F; Sharp, William J

2012-02-01

This article presents the case of a 42-year-old man who presented with superior vena cava (SVC) syndrome due to fibrosing mediastinitis with multiple failed attempts at recanalization. We initially treated him with unilateral sharp needle recanalization of the right innominate vein into the SVC stump followed by stenting. Although his symptoms improved immediately, they did not completely resolve. Six months later, he returned with worsening symptoms, and venography revealed in-stent restenosis. The patient requested simultaneous treatment on the left side. The right stent was dilated, and a 3-cm-long occlusion of the left innominate vein was recanalized, again using sharp needle technique, homing into the struts of the right-sided stent. Following fenestration of the stent, a second stent was deployed from the left side into the SVC, and the two Y limbs were sequentially dilated to allow a true bifurcation anatomy (figure). The patient had complete resolution of his symptoms and continues to do well 6 months later. Copyright © 2012 Annals of Vascular Surgery Inc. Published by Elsevier Inc. All rights reserved.

A comparative evaluation of the in vitro penetration performance of the improved Crest complete toothbrush versus the Current Crest complete toothbrush, the Colgate Precision toothbrush and the Oral-B P40 toothbrush.

PubMed

Volpenhein, D W; Handel, S E; Hughes, T J; Wild, J

1996-01-01

Removal of plaque and debris from interproximal surfaces during toothbrushing has generally been difficult to achieve, in large part because traditional flat-bristled toothbrushes do not offer good interproximal penetration. As a result, a number of varying bristle designs have been developed, with the rippled-design brush shown to be particularly effective at removing interproximal plaque. Recently, an existing brush, the original Crest Complete, was modified to offer a more deeply rippled version. This study evaluated the interproximal penetration of four bristle designs: rippled pattern (original Crest Complete), deeper rippled pattern (improved Crest Complete), multi-level (Colgate Precision), and flat-tufted (Oral-B P40). The study used a previously reported in vitro model for determining interproximal penetration of manual toothbrushes (J Clin Dent 5:27-33, 1994). In order to effectively mimic the in-use characteristics of toothbrushing, this model is based on analysis of videotaped consumer brushing habits, tooth morphology, and in vivo plaque tenacity characteristics and uses the three most predominantly used brushing techniques (circular, up-and-down, and back-and-forth, with the brush held at both 45 and 90 degrees to the tooth surface). In addition, the model's brush stroke length, brush force, and brush speed are likewise based on analysis of consumer brushing patterns. The results of the study indicate that the new Crest Complete with deeper rippled bristles provided significantly superior (p < or = 0.05) interproximal penetration than the Colgate Precision and Oral-B brushes overall and for three of the four brush strokes tested. In addition, the new Crest Complete was found to provide significantly superior interproximal penetration to the original Crest Complete overall and in circular and up-and-down strokes, and the original Crest Complete provided superior overall interproximal penetration to the Colgate and Oral-B brushes.

The Factorability of Quadratics: Motivation for More Techniques

ERIC Educational Resources Information Center

Bosse, Michael J.; Nandakumar, N. R.

2005-01-01

Typically, secondary and college algebra students attempt to utilize either completing the square or the quadratic formula as techniques to solve a quadratic equation only after frustration with factoring has arisen. While both completing the square and the quadratic formula are techniques which can determine solutions for all quadratic equations,…

SAN RAFAEL PRIMITIVE AREA, CALIFORNIA.

USGS Publications Warehouse

Gower, H.D.

1984-01-01

No mineral-resource potential was identified during studies of the San Rafael Primitive Area, located at the southern end of the Coast Ranges of California. No petroleum has been produced from the area and there is little promise for the occurrence of energy resources. Limestone occurs in the area but also is found in abundance outside the area. Inasmuch as sampling and analytical techniques have improved significantly since this study was completed a restudy of the area using new methodology is possibly warranted.

A study for hypergolic vapor sensor development

NASA Technical Reports Server (NTRS)

Stetter, J. R.; Tellefsen, K.

1977-01-01

In summary, the following tasks were completed within the scope of this work: (1) a portable Monomethylhydrazine analyzer was developed, designed, fabricated and tested. (2) A portable NO2 analyzer was developed, designed, fabricated and tested. (3) Sampling probes and accessories were designed and fabricated for this instrumentation. (4) Improvements and modifications were made to the model 7630 Ecolyzer in preparation for field testing. (5) Instrument calibration procedures and hydrazine handling techniques necessary to the successful application of this hardware were developed.

Impact parameter determination in experimental analysis using a neural network

NASA Astrophysics Data System (ADS)

Haddad, F.; Hagel, K.; Li, J.; Mdeiwayeh, N.; Natowitz, J. B.; Wada, R.; Xiao, B.; David, C.; Freslier, M.; Aichelin, J.

1997-03-01

A neural network is used to determine the impact parameter in 40Ca+40Ca reactions. The effect of the detection efficiency as well as the model dependence of the training procedure has been studied carefully. An overall improvement of the impact parameter determination of 25% is obtained using this technique. The analysis of Amphora 40Ca+40Ca data at 35 MeV per nucleon using a neural network shows two well-separated classes of events among the selected ``complete'' events.

Long-Term Instability of GPS-Based Time Transfer and Proposals for Improvements

DTIC Science & Technology

2011-01-01

receiver, or use of a completely independent technique such as Two-Way Satellite Time and Frequency Transfer ( TWSTFT ), helps to identify which receiver...is generated using not only the PTB’s Two-Way Satellite Time and Frequency Transfer ( TWSTFT or TW) links, but also links based on other PTB GNSS...including the PTB by X WX [1,2]; delay variations in other PTB time transfer systems would have an additive effect whether they were TWSTFT or GNSS

The Use of Cyclone Modeling in the Erection of Precast Segmental Aerial Construction.

DTIC Science & Technology

1983-06-01

activity or completion of a work cycle within an activity. Marvin E. Mundel outlines the three methods31 as: 1. CONTINUOUS TIMING In continouous timing...technique described by Mundel and outlined in Chapter II in which actual times are recorded and durations for activities obtained later by suc- cessive...8. 28. Thomas, p. 264. 29. Thomas and Holland, p. 520. 30. Thomas and Holland, p. 521. 31. Marvin E. Mundel , Motion and Time Study, Improving

LANDSAT land cover analysis completed for CIRSS/San Bernardino County project

NASA Technical Reports Server (NTRS)

Likens, W.; Maw, K.; Sinnott, D. (Principal Investigator)

1982-01-01

The LANDSAT analysis carried out as part of Ames Research Center's San Bernardino County Project, one of four projects sponsored by NASA as part of the California Integrated Remote Sensing System (CIRSS) effort for generating and utilizing digital geographic data bases, is described. Topics explored include use of data-base modeling with spectral cluster data to improve LANDSAT data classification, and quantitative evaluation of several change techniques. Both 1976 and 1979 LANDSAT data were used in the project.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Faye, Sherry A.; Richards, Jason M.; Gallardo, Athena M.

Sequential extraction is a useful technique for assessing the potential to leach actinides from soils; however, current literature lacks uniformity in experimental details, making direct comparison of results impossible. This work continued development toward a standardized five-step sequential extraction protocol by analyzing extraction behaviors of 232Th, 238U, 239,240Pu and 241Am from lake and ocean sediment reference materials. Results produced a standardized procedure after creating more defined reaction conditions to improve method repeatability. A NaOH fusion procedure is recommended following sequential leaching for the complete dissolution of insoluble species.

The effect of yoga on puborectalis paradox.

PubMed

Dolk, A; Holmström, B; Johansson, C; Frostell, C; Nilsson, B Y

1991-08-01

Nine patients with severe defaecation difficulties primarily considered to be due to puborectalis dysfunction (puborectalis paradox), verified by electromyography (EMG) of the striated anal sphincter muscles, were offered training in Yogic techniques of relaxation and muscle control in order to change the activity of the pelvic floor muscles during attempted defaecation. Five patients completed the training program of 20 2-hour sessions and were re-examined clinically and with EMG. One patient regained a normal EMG pattern but none of the patients improved clinically.

Injection Laryngoplasty Using Micronized Acellular Dermis for Vocal Fold Paralysis: Long-term Voice Outcomes.

PubMed

Hernandez, Stephen C; Sibley, Haley; Fink, Daniel S; Kunduk, Melda; Schexnaildre, Mell; Kakade, Anagha; McWhorter, Andrew J

2016-05-01

Micronized acellular dermis has been used for nearly 15 years to correct glottic insufficiency. With previous demonstration of safety and efficacy, this study aims to evaluate intermediate and long-term voice outcomes in those who underwent injection laryngoplasty for unilateral vocal fold paralysis. Technique and timing of injection were also reviewed to assess their impact on outcomes. Case series with chart review. Tertiary care center. Patients undergoing injection laryngoplasty from May 2007 to September 2012 were reviewed for possible inclusion. Pre- and postoperative Voice Handicap Index (VHI) scores, as well as senior speech-language pathologists' blinded assessment of voice, were collected for analysis. The final sample included patients who underwent injection laryngoplasty for unilateral vocal fold paralysis, 33 of whom had VHI results and 37 of whom had voice recordings. Additional data were obtained, including technique and timing of injection. Analysis was performed on those patients above with VHI and perceptual voice grades before and at least 6 months following injection. Mean VHI improved by 28.7 points at 6 to 12 months and 22.8 points at >12 months (P = .001). Mean perceptual voice grades improved by 17.6 points at 6 to 12 months and 16.3 points at >12 months (P < .001). No statistically significant difference was found with technique or time to injection. Micronized acellular dermis is a safe injectable that improved both patient-completed voice ratings and blinded reviewer voice gradings at intermediate and long-term follow-up. Further investigation may be warranted regarding technique and timing of injection. © American Academy of Otolaryngology—Head and Neck Surgery Foundation 2016.

Neuroprotection trek--the next generation: neuromodulation I. Techniques--deep brain stimulation, vagus nerve stimulation, and transcranial magnetic stimulation

NASA Technical Reports Server (NTRS)

Andrews, Russell J.

2003-01-01

Neuromodulation denotes controlled electrical stimulation of the central or peripheral nervous system. The three forms of neuromodulation described in this paper-deep brain stimulation, vagus nerve stimulation, and transcranial magnetic stimulation-were chosen primarily for their demonstrated or potential clinical usefulness. Deep brain stimulation is a completely implanted technique for improving movement disorders, such as Parkinson's disease, by very focal electrical stimulation of the brain-a technique that employs well-established hardware (electrode and pulse generator/battery). Vagus nerve stimulation is similar to deep brain stimulation in being well-established (for the treatment of refractory epilepsy), completely implanted, and having hardware that can be considered standard at the present time. Vagus nerve stimulation differs from deep brain stimulation, however, in that afferent stimulation of the vagus nerve results in diffuse effects on many regions throughout the brain. Although use of deep brain stimulation for applications beyond movement disorders will no doubt involve placing the stimulating electrode(s) in regions other than the thalamus, subthalamus, or globus pallidus, the use of vagus nerve stimulation for applications beyond epilepsy-for example, depression and eating disorders-is unlikely to require altering the hardware significantly (although stimulation protocols may differ). Transcranial magnetic stimulation is an example of an external or non-implanted, intermittent (at least given the current state of the hardware) stimulation technique, the clinical value of which for neuromodulation and neuroprotection remains to be determined.

Neuroprotection trek--the next generation: neuromodulation I. Techniques--deep brain stimulation, vagus nerve stimulation, and transcranial magnetic stimulation.

PubMed

Andrews, Russell J

2003-05-01

Neuromodulation denotes controlled electrical stimulation of the central or peripheral nervous system. The three forms of neuromodulation described in this paper-deep brain stimulation, vagus nerve stimulation, and transcranial magnetic stimulation-were chosen primarily for their demonstrated or potential clinical usefulness. Deep brain stimulation is a completely implanted technique for improving movement disorders, such as Parkinson's disease, by very focal electrical stimulation of the brain-a technique that employs well-established hardware (electrode and pulse generator/battery). Vagus nerve stimulation is similar to deep brain stimulation in being well-established (for the treatment of refractory epilepsy), completely implanted, and having hardware that can be considered standard at the present time. Vagus nerve stimulation differs from deep brain stimulation, however, in that afferent stimulation of the vagus nerve results in diffuse effects on many regions throughout the brain. Although use of deep brain stimulation for applications beyond movement disorders will no doubt involve placing the stimulating electrode(s) in regions other than the thalamus, subthalamus, or globus pallidus, the use of vagus nerve stimulation for applications beyond epilepsy-for example, depression and eating disorders-is unlikely to require altering the hardware significantly (although stimulation protocols may differ). Transcranial magnetic stimulation is an example of an external or non-implanted, intermittent (at least given the current state of the hardware) stimulation technique, the clinical value of which for neuromodulation and neuroprotection remains to be determined.

Requirements analysis, domain knowledge, and design

NASA Technical Reports Server (NTRS)

Potts, Colin

1988-01-01

Two improvements to current requirements analysis practices are suggested: domain modeling, and the systematic application of analysis heuristics. Domain modeling is the representation of relevant application knowledge prior to requirements specification. Artificial intelligence techniques may eventually be applicable for domain modeling. In the short term, however, restricted domain modeling techniques, such as that in JSD, will still be of practical benefit. Analysis heuristics are standard patterns of reasoning about the requirements. They usually generate questions of clarification or issues relating to completeness. Analysis heuristics can be represented and therefore systematically applied in an issue-based framework. This is illustrated by an issue-based analysis of JSD's domain modeling and functional specification heuristics. They are discussed in the context of the preliminary design of simple embedded systems.

Control techniques for an automated mixed traffic vehicle

NASA Technical Reports Server (NTRS)

Meisenholder, G. W.; Johnston, A. R.

1977-01-01

The paper describes an automated mixed traffic vehicle (AMTV), a driverless low-speed tram designed to operate in mixed pedestrian and vehicular traffic. The vehicle is a six-passenger electric tram equipped with sensing and control which permit it to function on existing streets in an automatic mode. The design includes established wire-following techniques for steering and near-IR headway sensors. A 7-mph cruise speed is reduced to 2 mph or a complete stop in response to sensor (or passenger) inputs. The AMTV performance is evaluated by operation on a loop route and by simulation. Some necessary improvements involving sensors, sensor pattern, use of an audible signal, and control lag are discussed. It is suggested that appropriate modifications will eliminate collision incidents.

Redundancy management for efficient fault recovery in NASA's distributed computing system

NASA Technical Reports Server (NTRS)

Malek, Miroslaw; Pandya, Mihir; Yau, Kitty

1991-01-01

The management of redundancy in computer systems was studied and guidelines were provided for the development of NASA's fault-tolerant distributed systems. Fault recovery and reconfiguration mechanisms were examined. A theoretical foundation was laid for redundancy management by efficient reconfiguration methods and algorithmic diversity. Algorithms were developed to optimize the resources for embedding of computational graphs of tasks in the system architecture and reconfiguration of these tasks after a failure has occurred. The computational structure represented by a path and the complete binary tree was considered and the mesh and hypercube architectures were targeted for their embeddings. The innovative concept of Hybrid Algorithm Technique was introduced. This new technique provides a mechanism for obtaining fault tolerance while exhibiting improved performance.

Efficacy of a new educational tool to improve Handrubbing technique amongst healthcare workers: a controlled, before-after study.

PubMed

Stewardson, Andrew J; Iten, Anne; Camus, Véronique; Gayet-Ageron, Angèle; Caulfield, Darren; Lacey, Gerard; Pittet, Didier

2014-01-01

Hand hygiene is a key component of infection control in healthcare. WHO recommends that healthcare workers perform six specific poses during each hand hygiene action. SureWash (Glanta Ltd, Dublin, Ireland) is a novel device that uses video-measurement technology and immediate feedback to teach this technique. We assessed the impact of self-directed SureWash use on healthcare worker hand hygiene technique and evaluated the device's diagnostic capacity. A controlled before-after study: subjects in Group A were exposed to the SureWash for four weeks followed by Group B for 12 weeks. Each subject's hand hygiene technique was assessed by blinded observers at baseline (T0) and following intervention periods (T1 and T2). Primary outcome was performance of a complete hand hygiene action, requiring all six poses during an action lasting ≥20 seconds. The number of poses per hand hygiene action (maximum 6) was assessed in a post-hoc analysis. SureWash's diagnostic capacity compared to human observers was assessed using ROC curve analysis. Thirty-four and 29 healthcare workers were recruited to groups A and B, respectively. No participants performed a complete action at baseline. At T1, one Group A participant and no Group B participants performed a complete action. At baseline, the median number of poses performed per action was 2.0 and 1.0 in Groups A and B, respectively (p = 0.12). At T1, the number of poses per action was greater in Group A (post-intervention) than Group B (control): median 3.8 and 2.0, respectively (p<0.001). In Group A, the number of poses performed twelve weeks post-intervention (median 3.0) remained higher than baseline (p<0.001). The area under the ROC curves for the 6 poses ranged from 0.59 to 0.88. While no impact on complete actions was demonstrated, SureWash significantly increased the number of poses per hand hygiene action and demonstrated good diagnostic capacity.

[Necessities of professionals of the family health teams from the "4a Coordenadoria Regional de Saúde do Estado do Rio Grande do Sul" for training and improvement].

PubMed

Ferreira, Maria Evanir Vicente; Schimith, Maria Denise; Cáceres, Nilton Carlos

2010-08-01

This study had the aim to verify the necessities of training and improvement of the 4th Regional Coordination in Health of Rio Grande do Sul State family health teams. The data collection was carried out through the application of questionnaires with objective questions, composed by two parts: field and competence nucleus. For data analyses, Normality, Chi-Square and G tests were used as statistical procedures for Easy and Difficult attributions indicated by the professionals. Professionals have shown less difficulty with generic attributions, related with basic methods and techniques of each health area. However, they have revealed a lot of difficulties with attributions relating to the search of new partners in health inside communities, stimulation of the people participation in the discussion of health rights, and completion of the SIA/SIAB forms, and others. Even after 12 years of the foundation of the Family Health Program (PSF), several difficulties are still observed concerning the way to work with this new health strategy in Brazil. Proposals are made for the complete understanding and improvement of the PSF strategy.

3D ion velocity distribution function measurement in an electric thruster using laser induced fluorescence tomography

NASA Astrophysics Data System (ADS)

Elias, P. Q.; Jarrige, J.; Cucchetti, E.; Cannat, F.; Packan, D.

2017-09-01

Measuring the full ion velocity distribution function (IVDF) by non-intrusive techniques can improve our understanding of the ionization processes and beam dynamics at work in electric thrusters. In this paper, a Laser-Induced Fluorescence (LIF) tomographic reconstruction technique is applied to the measurement of the IVDF in the plume of a miniature Hall effect thruster. A setup is developed to move the laser axis along two rotation axes around the measurement volume. The fluorescence spectra taken from different viewing angles are combined using a tomographic reconstruction algorithm to build the complete 3D (in phase space) time-averaged distribution function. For the first time, this technique is used in the plume of a miniature Hall effect thruster to measure the full distribution function of the xenon ions. Two examples of reconstructions are provided, in front of the thruster nose-cone and in front of the anode channel. The reconstruction reveals the features of the ion beam, in particular on the thruster axis where a toroidal distribution function is observed. These findings are consistent with the thruster shape and operation. This technique, which can be used with other LIF schemes, could be helpful in revealing the details of the ion production regions and the beam dynamics. Using a more powerful laser source, the current implementation of the technique could be improved to reduce the measurement time and also to reconstruct the temporal evolution of the distribution function.

Benchmarking of state-of-the-art needle detection algorithms in 3D ultrasound data volumes

NASA Astrophysics Data System (ADS)

Pourtaherian, Arash; Zinger, Svitlana; de With, Peter H. N.; Korsten, Hendrikus H. M.; Mihajlovic, Nenad

2015-03-01

Ultrasound-guided needle interventions are widely practiced in medical diagnostics and therapy, i.e. for biopsy guidance, regional anesthesia or for brachytherapy. Needle guidance using 2D ultrasound can be very challenging due to the poor needle visibility and the limited field of view. Since 3D ultrasound transducers are becoming more widely used, needle guidance can be improved and simplified with appropriate computer-aided analyses. In this paper, we compare two state-of-the-art 3D needle detection techniques: a technique based on line filtering from literature and a system employing Gabor transformation. Both algorithms utilize supervised classification to pre-select candidate needle voxels in the volume and then fit a model of the needle on the selected voxels. The major differences between the two approaches are in extracting the feature vectors for classification and selecting the criterion for fitting. We evaluate the performance of the two techniques using manually-annotated ground truth in several ex-vivo situations of different complexities, containing three different needle types with various insertion angles. This extensive evaluation provides better understanding on the limitations and advantages of each technique under different acquisition conditions, which is leading to the development of improved techniques for more reliable and accurate localization. Benchmarking results that the Gabor features are better capable of distinguishing the needle voxels in all datasets. Moreover, it is shown that the complete processing chain of the Gabor-based method outperforms the line filtering in accuracy and stability of the detection results.

Successful peroral endoscopic myotomy performed in Endoscopy Department as a radical, long-term treatment for esophageal achalasia - the Greek experience.

PubMed

Eleftheriadis, Nikolas; Eleftheriadou, Eleni Damianos

2017-01-01

Peroral endoscopic myotomy (POEM) has been considered as a minimal-invasive, innovative technique for long-term treatment of all types of esophageal achalasia and other esophageal motility disorders. We report on 20 consecutive Greek patients with manometrically proved esophageal achalasia (14 patients with type I, 4 with type II, 2 with type III, and 4 with sigmoid esophagus), with an age range of 32-92 years, mean age 59 years, 12 males, successfully treated by POEM from 2013 to 2015. The Eckardt score was 7-12 (type III). Seventeen (85%) POEM procedures were performed in the Endoscopy Department, according to a previous study. During POEM, CO 2 insufflation was mandatory, while the Triangle Tip knife was the only knife used in all procedures. Eckardt score, esophagogram and manometry before and after performing POEM were used for evaluation of our results. The follow-up period was 6 months to 3 years. Selective circular myotomy, 10-13 cm in length, was successfully completed in all patients without severe acute or late complications. Three patients (15%) showed moderate pneumomediastinum and pneumoperitoneum, which was successfully managed by abdominal needle drainage during the procedure. One patient showed mild pleural collection, and in one patient the clip-endoloop technique was used to successfully close the mucosal entry after the completion of POEM. The outcome was uneventful without any further clinical consequences. No other short- or long-term serious complications were reported. Patients were discharged after 1-3 days of hospitalization. Six months to 3 years after the POEM procedure, all patients were alive; the majority (90%) had complete clinical improvement, while two patients with sigmoid-type achalasia showed moderate-to-significant clinical improvement. Erosive esophagitis was reported in 15%. Our results are in accordance with international data, and proved the safety and efficacy of the POEM technique for radical long-term treatment of all types of achalasia, including end-stage sigmoid-type achalasia, in the Endoscopy Department. However, long-term follow-up is necessary and awaited.

[Renal decapsulation for the treatment of anuria : A "forgotten" treatment from the early 20th century].

PubMed

Dräger, D L; Protzel, C; Hakenberg, O W

2017-01-01

In the early 20th century, Harrison first performed renal decapsulation in anuric children with scarlet fever and observed improvement in renal function postoperatively. The pathophysiological explanation was seen in intraparenchymal renal pressure due to edema which was improved by surgical decapsulation. The technique of decapsulation was simple excision after incision and blunt dissection of the renal parenchyma. Renal decapsulation then became a procedure commonly used for many indications in inflammatory renal conditions; indications were renal angioneurosis, hydronephrosis, toxic, bacterial and chronic nephritis, renal abscess and even eclampsia. With the beginning of the antibiotic era, renal decapsulation became obsolete and has disappeared from the urological spectrum completely.

Direct modeling parameter signature analysis and failure mode prediction of physical systems using hybrid computer optimization

NASA Technical Reports Server (NTRS)

Drake, R. L.; Duvoisin, P. F.; Asthana, A.; Mather, T. W.

1971-01-01

High speed automated identification and design of dynamic systems, both linear and nonlinear, are discussed. Special emphasis is placed on developing hardware and techniques which are applicable to practical problems. The basic modeling experiment and new results are described. Using the improvements developed successful identification of several systems, including a physical example as well as simulated systems, was obtained. The advantages of parameter signature analysis over signal signature analysis in go-no go testing of operational systems were demonstrated. The feasibility of using these ideas in failure mode prediction in operating systems was also investigated. An improved digital controlled nonlinear function generator was developed, de-bugged, and completely documented.

ED becomes 'lean' and cuts LBTC, LOS times.

PubMed

2008-04-01

Lean manufacturing techniques, first developed by Toyota, can be successfully adapted to help improve processes in your ED. St. Luke's Episcopal Hospital in Houston, has used Lean to reduce median length of stay, frequency of diversions, and the percentage of patients who left before treatment was complete (LBTC). Here's why "Lean" can help improve the performance of your ED: It enables you and your staff to see things from the patient's point of view. Lean tools enable you to view the status of your department in real-time and to compare that status with your performance goals. Exercises help identify areas where your processes break down and determine the most likely solutions.

All chain Loran-C time synchronization

NASA Technical Reports Server (NTRS)

Sherman, H. T.

1973-01-01

A program is in progress to implement coordinated universal time (UTC) synchronization on all Loran-C transmissions. The present capability is limited to five Loran-C chains in which the tolerance is twenty-five microseconds with respect to UTC. Upon completion of the program, the transmissions of all Loran-C chains will be maintained within five microseconds of UTC. The improvement plan consists of equipping selected Loran-C transmitting stations for greater precision of frequency standard adjustment and improved monitoring capability. External time monitor stations will utilize television time transfer techniques with nearby SATCOM terminals where practicable, thus providing the requisite traceability to the Naval Observatory. The monitor equipment groups and the interrelationships with the ground station equipment are discussed. After a brief review of control doctrine, forth-coming improvements to transmitting stations and how the time monitor and navigation equipments will complement each other resulting in improved service to all users of the Loran-C system are described.

Quantitative Electron Probe Microanalysis: State of the Art

NASA Technical Reports Server (NTRS)

Carpernter, P. K.

2005-01-01

Quantitative electron-probe microanalysis (EPMA) has improved due to better instrument design and X-ray correction methods. Design improvement of the electron column and X-ray spectrometer has resulted in measurement precision that exceeds analytical accuracy. Wavelength-dispersive spectrometer (WDS) have layered-dispersive diffraction crystals with improved light-element sensitivity. Newer energy-dispersive spectrometers (EDS) have Si-drift detector elements, thin window designs, and digital processing electronics with X-ray throughput approaching that of WDS Systems. Using these systems, digital X-ray mapping coupled with spectrum imaging is a powerful compositional mapping tool. Improvements in analytical accuracy are due to better X-ray correction algorithms, mass absorption coefficient data sets,and analysis method for complex geometries. ZAF algorithms have ban superceded by Phi(pz) algorithms that better model the depth distribution of primary X-ray production. Complex thin film and particle geometries are treated using Phi(pz) algorithms, end results agree well with Monte Carlo simulations. For geological materials, X-ray absorption dominates the corretions end depends on the accuracy of mass absorption coefficient (MAC) data sets. However, few MACs have been experimentally measured, and the use of fitted coefficients continues due to general success of the analytical technique. A polynomial formulation of the Bence-Albec alpha-factor technique, calibrated using Phi(pz) algorithms, is used to critically evaluate accuracy issues and can be also be used for high 2% relative and is limited by measurement precision for ideal cases, but for many elements the analytical accuracy is unproven. The EPMA technique has improved to the point where it is frequently used instead of the petrogaphic microscope for reconnaissance work. Examples of stagnant research areas are: WDS detector design characterization of calibration standards, and the need for more complete treatment of the continuum X-ray fluorescence correction.

Improving general flexibility with a mind-body approach: a randomized, controlled trial using neuro emotional Technique®.

PubMed

Jensen, Anne M; Ramasamy, Adaikalavan; Hall, Michael W

2012-08-01

General flexibility is a key component of health, well-being, and general physical conditioning. Reduced flexibility has both physical and mental/emotional etiologies and can lead to musculoskeletal injuries and athletic underperformance. Few studies have tested the effectiveness of a mind-body therapy on general flexibility. The aim of this study was to investigate if Neuro Emotional Technique® (NET), a mind-body technique shown to be effective in reducing stress, can also improve general flexibility. The sit-and-reach test (SR) score was used as a measure of general flexibility. Forty-five healthy participants were recruited from the general population and assessed for their initial SR score before being randomly allocated to receive (a) two 20-minute sessions of NET (experimental group); (b) two 20-minute sessions of stretching instruction (active control group); or (c) no intervention or instruction (passive control group). After intervention, the participants were reassessed in a similar manner by the same blind assessor. The participants also answered questions about demographics, usual water and caffeine consumption, and activity level, and they completed an anxiety/mood psychometric preintervention and postintervention. The mean (SD) change in the SR score was +3.1 cm (2.5) in the NET group, +1.2 cm (2.3) in the active control group and +1.0 cm (2.6) in the passive control group. Although all the 3 groups showed some improvement, the improvement in the NET group was statistically significant when compared with that of either the passive controls (p = 0.015) or the active controls (p = 0.021). This study suggests that NET could provide an effective treatment in improving general flexibility. A larger study is required to confirm these findings and also to assess longer term effectiveness of this therapy on general flexibility.

Self-Alignment MEMS IMU Method Based on the Rotation Modulation Technique on a Swing Base

PubMed Central

Chen, Zhiyong; Yang, Haotian; Wang, Chengbin; Lin, Zhihui; Guo, Meifeng

2018-01-01

The micro-electro-mechanical-system (MEMS) inertial measurement unit (IMU) has been widely used in the field of inertial navigation due to its small size, low cost, and light weight, but aligning MEMS IMUs remains a challenge for researchers. MEMS IMUs have been conventionally aligned on a static base, requiring other sensors, such as magnetometers or satellites, to provide auxiliary information, which limits its application range to some extent. Therefore, improving the alignment accuracy of MEMS IMU as much as possible under swing conditions is of considerable value. This paper proposes an alignment method based on the rotation modulation technique (RMT), which is completely self-aligned, unlike the existing alignment techniques. The effect of the inertial sensor errors is mitigated by rotating the IMU. Then, inertial frame-based alignment using the rotation modulation technique (RMT-IFBA) achieved coarse alignment on the swing base. The strong tracking filter (STF) further improved the alignment accuracy. The performance of the proposed method was validated with a physical experiment, and the results of the alignment showed that the standard deviations of pitch, roll, and heading angle were 0.0140°, 0.0097°, and 0.91°, respectively, which verified the practicality and efficacy of the proposed method for the self-alignment of the MEMS IMU on a swing base. PMID:29649150

Fingerprint pattern restoration by digital image processing techniques.

PubMed

Wen, Che-Yen; Yu, Chiu-Chung

2003-09-01

Fingerprint evidence plays an important role in solving criminal problems. However, defective (lacking information needed for completeness) or contaminated (undesirable information included) fingerprint patterns make identifying and recognizing processes difficult. Unfortunately. this is the usual case. In the recognizing process (enhancement of patterns, or elimination of "false alarms" so that a fingerprint pattern can be searched in the Automated Fingerprint Identification System (AFIS)), chemical and physical techniques have been proposed to improve pattern legibility. In the identifying process, a fingerprint examiner can enhance contaminated (but not defective) fingerprint patterns under guidelines provided by the Scientific Working Group on Friction Ridge Analysis, Study and Technology (SWGFAST), the Scientific Working Group on Imaging Technology (SWGIT), and an AFIS working group within the National Institute of Justice. Recently, the image processing techniques have been successfully applied in forensic science. For example, we have applied image enhancement methods to improve the legibility of digital images such as fingerprints and vehicle plate numbers. In this paper, we propose a novel digital image restoration technique based on the AM (amplitude modulation)-FM (frequency modulation) reaction-diffusion method to restore defective or contaminated fingerprint patterns. This method shows its potential application to fingerprint pattern enhancement in the recognizing process (but not for the identifying process). Synthetic and real images are used to show the capability of the proposed method. The results of enhancing fingerprint patterns by the manual process and our method are evaluated and compared.

Implementation Of Fuzzy Approach To Improve Time Estimation [Case Study Of A Thermal Power Plant Is Considered

NASA Astrophysics Data System (ADS)

Pradhan, Moumita; Pradhan, Dinesh; Bandyopadhyay, G.

2010-10-01

Fuzzy System has demonstrated their ability to solve different kinds of problem in various application domains. There is an increasing interest to apply fuzzy concept to improve tasks of any system. Here case study of a thermal power plant is considered. Existing time estimation represents time to complete tasks. Applying fuzzy linear approach it becomes clear that after each confidence level least time is taken to complete tasks. As time schedule is less than less amount of cost is needed. Objective of this paper is to show how one system becomes more efficient in applying Fuzzy Linear approach. In this paper we want to optimize the time estimation to perform all tasks in appropriate time schedules. For the case study, optimistic time (to), pessimistic time (tp), most likely time(tm) is considered as data collected from thermal power plant. These time estimates help to calculate expected time(te) which represents time to complete particular task to considering all happenings. Using project evaluation and review technique (PERT) and critical path method (CPM) concept critical path duration (CPD) of this project is calculated. This tells that the probability of fifty percent of the total tasks can be completed in fifty days. Using critical path duration and standard deviation of the critical path, total completion of project can be completed easily after applying normal distribution. Using trapezoidal rule from four time estimates (to, tm, tp, te), we can calculate defuzzyfied value of time estimates. For range of fuzzy, we consider four confidence interval level say 0.4, 0.6, 0.8,1. From our study, it is seen that time estimates at confidence level between 0.4 and 0.8 gives the better result compared to other confidence levels.

Effect of background correction on peak detection and quantification in online comprehensive two-dimensional liquid chromatography using diode array detection.

PubMed

Allen, Robert C; John, Mallory G; Rutan, Sarah C; Filgueira, Marcelo R; Carr, Peter W

2012-09-07

A singular value decomposition-based background correction (SVD-BC) technique is proposed for the reduction of background contributions in online comprehensive two-dimensional liquid chromatography (LC×LC) data. The SVD-BC technique was compared to simply subtracting a blank chromatogram from a sample chromatogram and to a previously reported background correction technique for one dimensional chromatography, which uses an asymmetric weighted least squares (AWLS) approach. AWLS was the only background correction technique to completely remove the background artifacts from the samples as evaluated by visual inspection. However, the SVD-BC technique greatly reduced or eliminated the background artifacts as well and preserved the peak intensity better than AWLS. The loss in peak intensity by AWLS resulted in lower peak counts at the detection thresholds established using standards samples. However, the SVD-BC technique was found to introduce noise which led to detection of false peaks at the lower detection thresholds. As a result, the AWLS technique gave more precise peak counts than the SVD-BC technique, particularly at the lower detection thresholds. While the AWLS technique resulted in more consistent percent residual standard deviation values, a statistical improvement in peak quantification after background correction was not found regardless of the background correction technique used. Copyright © 2012 Elsevier B.V. All rights reserved.

[Perioperative managment of laparoscopic sleeve gastrectomy].

PubMed

Chang, Xu-sheng; Yin, Kai; Wang, Xin; Zhuo, Guang-zuan; Ding, Dan; Guo, Xiang; Zheng, Cheng-zhu

2013-10-01

To summarize the surgical technique and perioperative management of laparoscopic sleeve gastrectomy (LSG). A total of 57 morbid obesity patients undergoing LSG surgery from May 2010 to December 2012 were enrolled in the study, whose clinical data in perioperative period were analyzed retrospectively. These patients had more than 1 year of follow-up. All the patients received preoperative preparation and postoperative management, and postoperative excess weight loss(EWL%) and improvement of preoperative complications was evaluated. All the cases completed the operation under laparoscopy, except 1 case because of the abdominal extensive adhesion. The average operation time was(102.0±15.2) min and the mean intraoperative blood loss (132.3±45.6) ml. Of 2 postoperative hemorrhage patients, 1 case received conservative treatment, and another one underwent laparoscopic exploration. The EWL% at 3 months, 6 months and 1 year after procedure was (54.9±13.8)%, (79.0±23.6)% and (106.9±25.1)% respectively. The preoperative complications were improved in some degree. There were no operative death, and anastomotic leak, anastomotic stenosis, or surgical site infection occurred. LSG is a safe and effective surgical technique, whose safety and efficacy may be increased by improving the perioperative management.

Multicenter study of pars plana vitrectomy for optic disc pit maculopathy: MACPIT study.

PubMed

Avci, R; Kapran, Z; Ozdek, Ş; Teke, M Y; Oz, O; Guven, D; Yilmaz, S; Kaderli, B; Durukan, A H; Sobaci, G; Unver, Y B; Akduman, L; Kaynak, S; Dogan, I; Inan, U U

2017-09-01

PurposeTo evaluate surgical intervention with pars plana vitrectomy (PPV) for correction of optic disc pit maculopathy (ODP-M).Patients and methodsRetrospective chart review from 13 centres of 51 eyes of 50 patients with ODP-M who underwent PPV between 2002-2014. Anatomic and final best-corrected visual acuity (BCVA) outcomes were evaluated for all cases with different adjuvant techniques.ResultsThere were 23 males and 27 females with median age 25.5 (6-68) years. Preoperative median foveal thickness was 694.5 (331-1384) μm and improved to 252.5 (153-1405) μm. Median BCVA improved from 20/200 (20/20000 to 20/40) to 20/40 (20/2000 to 20/20) with 20/40 or better in 31 eyes. Complete retinal reattachment was achieved in 44 eyes (86.3%) at 7.1 (5.9) months. The good surgical outcomes were achieved in different adjuvant groups. Median follow-up was 24 (6 to 120) months.ConclusionsThese results confirm the long-term effectiveness of PPV for ODP-M. Prospective studies are needed to determine the effectiveness of any adjuvant technique in improving the success of PPV for ODP-M.

An Improved Framework for Confound Regression and Filtering for Control of Motion Artifact in the Preprocessing of Resting-State Functional Connectivity Data

PubMed Central

Satterthwaite, Theodore D.; Elliott, Mark A.; Gerraty, Raphael T.; Ruparel, Kosha; Loughead, James; Calkins, Monica E.; Eickhoff, Simon B.; Hakonarson, Hakon; Gur, Ruben C.; Gur, Raquel E.; Wolf, Daniel H.

2013-01-01

Several recent reports in large, independent samples have demonstrated the influence of motion artifact on resting-state functional connectivity MRI (rsfc-MRI). Standard rsfc-MRI preprocessing typically includes regression of confounding signals and band-pass filtering. However, substantial heterogeneity exists in how these techniques are implemented across studies, and no prior study has examined the effect of differing approaches for the control of motion-induced artifacts. To better understand how in-scanner head motion affects rsfc-MRI data, we describe the spatial, temporal, and spectral characteristics of motion artifacts in a sample of 348 adolescents. Analyses utilize a novel approach for describing head motion on a voxelwise basis. Next, we systematically evaluate the efficacy of a range of confound regression and filtering techniques for the control of motion-induced artifacts. Results reveal that the effectiveness of preprocessing procedures on the control of motion is heterogeneous, and that improved preprocessing provides a substantial benefit beyond typical procedures. These results demonstrate that the effect of motion on rsfc-MRI can be substantially attenuated through improved preprocessing procedures, but not completely removed. PMID:22926292

Improved spatial calibration for the CXRS system on EAST

NASA Astrophysics Data System (ADS)

Yin, X. H.; Li, Y. Y.; Fu, J.; Jiang, D.; Feng, S. Y.; Gu, Y. Q.; Cheng, Y.; Lyu, B.; Shi, Y. J.; Ye, M. Y.; Wan, B. N.

2016-11-01

A Charge eXchange Recombination Spectroscopy (CXRS) diagnostic system has been developed to measure profiles of ion temperature and rotation since 2014 on EAST. Several techniques have been developed to improve the spatial calibration of the CXRS diagnostic. The sightline location was obtained by measuring the coordinates of three points on each sightline using an articulated flexible coordinate measuring arm when the vessel was accessible. After vacuum pumping, the effect of pressure change in the vacuum vessel was evaluated by observing the movement of the light spot from back-illuminated sightlines on the first wall using the newly developed articulated inspection arm. In addition, the rotation of the periscope after vacuum pumping was derived by using the Doppler shift of neutral beam emission spectra without magnetic field. Combining these techniques, improved spatial calibration was implemented to provide a complete and accurate description of the EAST CXRS system. Due to the effects of the change of air pressure, a ˜0.4° periscope rotation, yielding a ˜20 mm movement of the major radius of observation positions to the lower field side, was derived. Results of Zeeman splitting of neutral beam emission spectra with magnetic field also showed good agreement with the calibration results.

Coaches' perspectives on implementing an evidence-informed injury prevention programme in junior community netball.

PubMed

Saunders, N; Otago, L; Romiti, M; Donaldson, A; White, P; Finch, Cf

2010-12-01

For effective sports injury prevention, information is needed about the implementation context for interventions. This study describes coaches' feedback on the implementation of an evidence-informed injury prevention programme in community junior netball using coaches' perceptions and the RE-AIM framework. A lower-limb injury prevention programme (Down to Earth; D2E), for teaching safe-landing techniques, was delivered to 31 coaches from 31 junior community netball teams in a 1-h workshop. Coaches then delivered a 6-week programme at team training sessions starting in the week before the competition season commenced. 65% of coaches completed a feedback survey 17 weeks after they had delivered the programme. Most (88%) coaches believed that D2E improved their players' ability to perform correct landing techniques in games and that players had retained these improvements over the season. The majority (83%) indicated that an improvement in player athletic attributes was the greatest advantage of D2E, followed by a reduction in injury risk. Identified barriers to implementing D2E were running out of time and very young players finding the drills too difficult. Coaches reported that they needed more ideas for training drills that could be incorporated into their programmes and believed that their own coaching training did not adequately prepare them to implement an injury prevention programme. Although coaches believed that D2E was effective in developing correct landing techniques, some modifications are needed to make it more suitable for younger players and coach education by accreditation courses could be improved to support the implementation of injury prevention programmes.

Optimizing Waveform Maximum Determination for Specular Point Tracking in Airborne GNSS-R.

PubMed

Motte, Erwan; Zribi, Mehrez

2017-08-16

Airborne GNSS-R campaigns are crucial to the understanding of signal interactions with the Earth's surface. As a consequence of the specific geometric configurations arising during measurements from aircraft, the reflected signals can be difficult to interpret under certain conditions like over strongly attenuating media such as forests, or when the reflected signal is contaminated by the direct signal. For these reasons, there are many cases where the reflectivity is overestimated, or a portion of the dataset has to be flagged as unusable. In this study we present techniques that have been developed to optimize the processing of airborne GNSS-R data, with the goal of improving its accuracy and robustness under non-optimal conditions. This approach is based on the detailed analysis of data produced by the instrument GLORI, which was recorded during an airborne campaign in the south west of France in June 2015. Our technique relies on the improved determination of reflected waveform peaks in the delay dimension, which is related to the loci of the signals contributed by the zone surrounding the specular point. It is shown that when developing techniques for the correct localization of waveform maxima under conditions of surfaces of low reflectivity, and/or contamination from the direct signal, it is possible to correct and extract values corresponding to the real reflectivity of the zone in the neighborhood of the specular point. This algorithm was applied to a reanalysis of the complete campaign dataset, following which the accuracy and sensitivity improved, and the usability of the dataset was improved by 30%.

A comparative evaluation of the in vitro penetration performance of the improved Crest Complete toothbrush versus the Colgate Total toothbrush and the Oral-B Advantage toothbrush.

PubMed

Volpenhein, D W; Hartman, W L

1996-01-01

Removal of plaque and debris from interproximal surfaces during toothbrushing has generally been difficult to achieve, in large part because traditional flat-bristled toothbrushes do not offer good interproximal penetration. As a result, a number of varying bristle designs have been developed, with the rippled-design brush shown to be particularly effective at removing interproximal plaque. Recently, an existing rippled brush, the original Crest Complete, was modified to offer longer rippled outer tufts to clean along the gumline more effectively. Therefore, this study evaluated the overall and gumline interproximal penetration of three bristle designs: rippled, raised pattern (Improved Crest Complete); and two multi-level patterns (Colgate Total and Oral-B Advantage). The study used a previously reported in vitro model for determining interproximal penetration of manual toothbrushes (J Clin Dent 5:27-33, 1994). In order to effectively mimic the in-use characteristics of toothbrushing, this model is based on analysis of videotaped consumer brushing habits, tooth morphology, and in vivo plaque tenacity characteristics, and uses the three most predominantly used brushing techniques (circular, up-and-down, and back-and-forth with the brush held at both 45 degrees and 90 degrees to the tooth surface). In addition, the model's brush stroke length, brush force, and brush speed are likewise based on an analysis of consumer brushing patterns. The results of this study indicate that the Improved Crest Complete with longer rippled outer bristles provided significantly superior (p < 0.05) interproximal penetration overall and at the gumline than the Colgate Total and Oral-B Advantage brushes.

Improved intact soil-core carbon determination applying regression shrinkage and variable selection techniques to complete spectrum laser-induced breakdown spectroscopy (LIBS).

PubMed

Bricklemyer, Ross S; Brown, David J; Turk, Philip J; Clegg, Sam M

2013-10-01

Laser-induced breakdown spectroscopy (LIBS) provides a potential method for rapid, in situ soil C measurement. In previous research on the application of LIBS to intact soil cores, we hypothesized that ultraviolet (UV) spectrum LIBS (200-300 nm) might not provide sufficient elemental information to reliably discriminate between soil organic C (SOC) and inorganic C (IC). In this study, using a custom complete spectrum (245-925 nm) core-scanning LIBS instrument, we analyzed 60 intact soil cores from six wheat fields. Predictive multi-response partial least squares (PLS2) models using full and reduced spectrum LIBS were compared for directly determining soil total C (TC), IC, and SOC. Two regression shrinkage and variable selection approaches, the least absolute shrinkage and selection operator (LASSO) and sparse multivariate regression with covariance estimation (MRCE), were tested for soil C predictions and the identification of wavelengths important for soil C prediction. Using complete spectrum LIBS for PLS2 modeling reduced the calibration standard error of prediction (SEP) 15 and 19% for TC and IC, respectively, compared to UV spectrum LIBS. The LASSO and MRCE approaches provided significantly improved calibration accuracy and reduced SEP 32-55% over UV spectrum PLS2 models. We conclude that (1) complete spectrum LIBS is superior to UV spectrum LIBS for predicting soil C for intact soil cores without pretreatment; (2) LASSO and MRCE approaches provide improved calibration prediction accuracy over PLS2 but require additional testing with increased soil and target analyte diversity; and (3) measurement errors associated with analyzing intact cores (e.g., sample density and surface roughness) require further study and quantification.

Study of complete interconnect reliability for a GaAs MMIC power amplifier

NASA Astrophysics Data System (ADS)

Lin, Qian; Wu, Haifeng; Chen, Shan-ji; Jia, Guoqing; Jiang, Wei; Chen, Chao

2018-05-01

By combining the finite element analysis (FEA) and artificial neural network (ANN) technique, the complete prediction of interconnect reliability for a monolithic microwave integrated circuit (MMIC) power amplifier (PA) at the both of direct current (DC) and alternating current (AC) operation conditions is achieved effectively in this article. As a example, a MMIC PA is modelled to study the electromigration failure of interconnect. This is the first time to study the interconnect reliability for an MMIC PA at the conditions of DC and AC operation simultaneously. By training the data from FEA, a high accuracy ANN model for PA reliability is constructed. Then, basing on the reliability database which is obtained from the ANN model, it can give important guidance for improving the reliability design for IC.

Active/passive scanning. [airborne multispectral laser scanners for agricultural and water resources applications

NASA Technical Reports Server (NTRS)

Woodfill, J. R.; Thomson, F. J.

1979-01-01

The paper deals with the design, construction, and applications of an active/passive multispectral scanner combining lasers with conventional passive remote sensors. An application investigation was first undertaken to identify remote sensing applications where active/passive scanners (APS) would provide improvement over current means. Calibration techniques and instrument sensitivity are evaluated to provide predictions of the APS's capability to meet user needs. A preliminary instrument design was developed from the initial conceptual scheme. A design review settled the issues of worthwhile applications, calibration approach, hardware design, and laser complement. Next, a detailed mechanical design was drafted and construction of the APS commenced. The completed APS was tested and calibrated in the laboratory, then installed in a C-47 aircraft and ground tested. Several flight tests completed the test program.

Improved Multi-Axial, Temperature and Time Dependent (MATT) Failure Model

NASA Technical Reports Server (NTRS)

Richardson, D. E.; Anderson, G. L.; Macon, D. J.

2002-01-01

An extensive effort has recently been completed by the Space Shuttle's Reusable Solid Rocket Motor (RSRM) nozzle program to completely characterize the effects of multi-axial loading, temperature and time on the failure characteristics of three filled epoxy adhesives (TIGA 321, EA913NA, EA946). As part of this effort, a single general failure criterion was developed that accounted for these effects simultaneously. This model was named the Multi- Axial, Temperature, and Time Dependent or MATT failure criterion. Due to the intricate nature of the failure criterion, some parameters were required to be calculated using complex equations or numerical methods. This paper documents some simple but accurate modifications to the failure criterion to allow for calculations of failure conditions without complex equations or numerical techniques.

Final Technical Report. Project Boeing SGS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bell, Thomas E.

Boeing and its partner, PJM Interconnection, teamed to bring advanced “defense-grade” technologies for cyber security to the US regional power grid through demonstration in PJM’s energy management environment. Under this cooperative project with the Department of Energy, Boeing and PJM have developed and demonstrated a host of technologies specifically tailored to the needs of PJM and the electric sector as a whole. The team has demonstrated to the energy industry a combination of processes, techniques and technologies that have been successfully implemented in the commercial, defense, and intelligence communities to identify, mitigate and continuously monitor the cyber security of criticalmore » systems. Guided by the results of a Cyber Security Risk-Based Assessment completed in Phase I, the Boeing-PJM team has completed multiple iterations through the Phase II Development and Phase III Deployment phases. Multiple cyber security solutions have been completed across a variety of controls including: Application Security, Enhanced Malware Detection, Security Incident and Event Management (SIEM) Optimization, Continuous Vulnerability Monitoring, SCADA Monitoring/Intrusion Detection, Operational Resiliency, Cyber Range simulations and hands on cyber security personnel training. All of the developed and demonstrated solutions are suitable for replication across the electric sector and/or the energy sector as a whole. Benefits identified include; Improved malware and intrusion detection capability on critical SCADA networks including behavioral-based alerts resulting in improved zero-day threat protection; Improved Security Incident and Event Management system resulting in better threat visibility, thus increasing the likelihood of detecting a serious event; Improved malware detection and zero-day threat response capability; Improved ability to systematically evaluate and secure in house and vendor sourced software applications; Improved ability to continuously monitor and maintain secure configuration of network devices resulting in reduced vulnerabilities for potential exploitation; Improved overall cyber security situational awareness through the integration of multiple discrete security technologies into a single cyber security reporting console; Improved ability to maintain the resiliency of critical systems in the face of a targeted cyber attack of other significant event; Improved ability to model complex networks for penetration testing and advanced training of cyber security personnel« less

Final-impression techniques and materials for making complete and removable partial dentures.

PubMed

Jayaraman, Srinivasan; Singh, Balendra P; Ramanathan, Balasubramanian; Pazhaniappan Pillai, Murukan; MacDonald, Laura; Kirubakaran, Richard

2018-04-04

Edentulism is relatively common and is often treated with the provision of complete or partial removable dentures. Clinicians make final impressions of complete dentures (CD) and removable partial dentures (RPD) using different techniques and materials. Applying the correct impression technique and material, based on an individual's oral condition, improves the quality of the prosthesis, which may improve quality of life. To assess the effects of different final-impression techniques and materials used to make complete dentures, for retention, stability, comfort, and quality of life in completely edentulous people.To assess the effects of different final-impression techniques and materials used to make removable partial dentures, for stability, comfort, overextension, and quality of life in partially edentulous people. Cochrane Oral Health's Information Specialist searched the following databases: Cochrane Oral Health's Trials Register (to 22 November 2017), the Cochrane Central Register of Controlled Trials (CENTRAL) (Cochrane Register of Studies, to 22 November 2017), MEDLINE Ovid (1946 to 22 November 2017), and Embase Ovid (21 December 2015 to 22 November 2017). The US National Institutes of Health Trials Registry (ClinicalTrials.gov) and the World Health Organization International Clinical Trials Registry Platform were searched for ongoing trials. No restrictions were placed on language or publication status when searching the electronic databases, however the search of Embase was restricted by date due to the Cochrane Centralised Search Project to identify all clinical trials and add them to CENTRAL. We included randomised controlled trials (RCTs) comparing different final-impression techniques and materials for treating people with complete dentures (CD) and removable partial dentures (RPD). For CD, we included trials that compared different materials or different techniques or both. In RPD for tooth-supported conditions, we included trials comparing the same material and different techniques, or different materials and the same technique. In tooth- and tissue-supported RPD, we included trials comparing the same material and different dual-impression techniques, and different materials with different dual-impression techniques. Two review authors independently, and in duplicate, screened studies for eligibility, extracted data, and assessed the risk of bias for each included trial. We expressed results as risk ratios (RR) for dichotomous outcomes, and as mean differences (MD) or standardised mean differences (SMD) for continuous outcomes, with 95% confidence intervals (CI), using the random-effects model. We constructed 'Summary of findings' tables for the main comparisons and outcomes (participant-reported oral health-related quality of life, quality of the denture, and denture border adjustments). We included nine studies in this review. Eight studies involved 485 participants with CD. We assessed six of the studies to be at high risk of bias, and two to be at low risk of bias. We judged one study on RPD with 72 randomised participants to be at high risk of bias.Overall, the quality of the evidence for each comparison and outcome was either low or very low, therefore, results should be interpreted with caution, as future research is likely to change the findings.Complete denturesTwo studies compared the same material and different techniques (one study contributed data to a secondary outcome only); two studies compared the same technique and different materials; and four studies compared different materials and techniques.One study (10 participants) evaluated two stage-two step, Biofunctional Prosthetic system (BPS) using additional silicone elastomer compared to conventional methods, and found no evidence of a clear difference for oral health-related quality of life, or quality of the dentures (denture satisfaction). The study reported that BPS required fewer adjustments. We assessed the quality of the evidence as very low.One study (27 participants) compared selective pressure final-impression technique using wax versus polysulfide elastomeric (rubber) material. The study did not measure quality of life or dentures, and found no evidence of a clear difference between interventions in the need for adjustments (RR 0.81, 95% CI 0.38 to 1.70). We assessed the quality of the evidence as very low.One study compared two stage-two step final impression with alginate versus silicone elastomer. Oral health-related quality of life measured by the OHIP-EDENT seemed to be better with silicone (MD 7.20, 95% CI 2.71 to 11.69; 144 participants). The study found no clear differences in participant-reported quality of the denture (comfort) after a two-week 'confirmation' period, but reported that silicone was better for stability and chewing efficiency. We assessed the quality of the evidence as low.Three studies compared single-stage impressions with alginate versus two stage-two step with elastomer (silicone, polysulfide, or polyether) impressions. There was no evidence of a clear difference in the OHIP-EDENT at one month (MD 0.05, 95% CI -2.37 to 2.47; two studies, 98 participants). There was no evidence of a clear difference in participant-rated general satisfaction with dentures at six months (MD 0.00, 95% CI -8.23 to 8.23; one study, 105 participants). We assessed the quality of the evidence as very low.One study compared single-stage alginate versus two stage-two step using zinc-oxide eugenol, and found no evidence of a clear difference in OHIP-EDENT (MD 0.50, 95% CI -2.67 to 3.67; 39 participants), or general satisfaction (RR 3.15, 95% CI 0.14 to 72.88; 39 participants) at six months. We assessed the quality of the evidence as very low.Removable partial denturesOne study randomised 72 participants and compared altered-cast technique versus one-piece cast technique. The study did not measure quality of life, but reported that most participants were satisfied with the dentures and there was no evidence of any clear difference between groups for general satisfaction at one-year follow-up (low-quality evidence). There was no evidence of a clear difference in number of intaglio adjustments at one year (RR 1.43, 95% CI 0.61 to 3.34) (very low-quality evidence). We conclude that there is no clear evidence that one technique or material has a substantial advantage over another for making complete dentures and removable partial dentures. Available evidence for the relative benefits of different denture fabrication techniques and final-impression materials is limited and is of low or very low quality. More high-quality RCTs are required.

Randomized controlled trial of yogic meditation techniques for patients with obsessive-compulsive disorder.

PubMed

Shannahoff-Khalsa, D S; Ray, L E; Levine, S; Gallen, C C; Schwartz, B J; Sidorowich, J J

1999-12-01

The objective of this study was to compare efficacy of two meditation protocols for treating patients with obsessive-compulsive disorder (OCD). Patients were randomized to two groups-matched for sex, age, and medication status-and blinded to the comparison protocol. They were told the trial would last for 12 months, unless one protocol proved to be more efficacious. If so, groups would merge, and the group that received the less efficacious treatment would also be afforded 12 months of the more effective one. The study was conducted at Children's Hospital, San Diego, Calif. Patients were selected according to Diagnostic and Statistical Manual of Mental Disorders, Third Edition-Revised (DSM-III-R) criteria and recruited by advertisements and referral. At baseline, Group 1 included 11 adults and 1 adolescent, and Group 2 included 10 adults. Group 1 employed a kundalini yoga meditation protocol and Group 2 employed the Relaxation Response plus Mindfulness Meditation technique. Baseline and 3-month interval testing was conducted using the Yale-Brown Obsessive Compulsive Scale (Y-BOCS), Symptoms Checklist-90-Revised Obsessive Compulsive (SCL-90-R OC) and Global Severity Index (SCL-90-R GSI) scales, Profile of Moods scale (POMS), Perceived Stress Scale (PSS), and Purpose in Life (PIL) test. Seven adults in each group completed 3 months of therapy. At 3 months, Group 1 demonstrated greater improvements (Student's independent groups t-test) on the Y-BOCS, SCL-90-R OC and GSI scales, and POMS, and greater but nonsignificant improvements on the PSS and PIL test. An intent-to-treat analysis (Y-BOCS) for the baseline and 3-month tests showed that only Group 1 improved. Within-group statistics (Student's paired t-tests) showed that Group 1 significantly improved on all six scales, but Group 2 had no improvements. Groups were merged for an additional year using Group 1 techniques. At 15 months, the final group (N=11) improved 71%, 62%, 66%, 74%, 39%, and 23%, respectively, on the Y-BOCS, SCL-90-R OC, SCL-90-R GSI, POMS, PSS, and PIL; P<0.003 (analysis of variance). This study demonstrates that kundalini yoga techniques are effective in the treatment of OCD.

SU-E-T-469: Implementation of VAs Web-Based Radiotherapy Incident Reporting and Analysis System (RIRAS)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kapoor, R; Palta, J; Hagan, M

Purpose: This Web-based Radiotherapy Incident Reporting and Analysis System (RIRAS) is a tool to improve quality of care for radiation therapy patients. This system is an important facet of continuing effort by our community to maintain and improve safety of radiotherapy.Material and Methods: VA’s National Radiation Oncology Program office has embarked on a program to electronically collect adverse events and good-catch data of radiation treatment of over 25,000 veterans treated with radiotherapy annually. This VA-Intranet based software design has made use of dataset taxonomies and data dictionaries defined in AAPM/ASTRO reports on error reporting. We used proven industrial and medicalmore » event reporting techniques to avoid several common problems faced in effective data collection such as incomplete data due to data entry fatigue by the reporters, missing data due to data difficult to obtain or not familiar to most reporters, missing reports due to fear of reprisal etc. This system encompasses the entire feedback loop of reporting an incident, analyzing it for salient details, and developing interventions to prevent it from happening again. The analysis reports with corrective, learning actions are shared with the reporter/facility and made public to the community (after deidentification) as part of the learning process. Results: Till date 50 incident/good catches have been reported in RIRAS and we have completed analysis on 100% of these reports. This is done due to the fact that each reported incidents is investigated and a complete analysis/patient-safety-work-product report is generated by radiation oncology domain-experts. Conclusions Because of the completeness of the data, the system has enabled us to analyze process steps and track trends of major errors which in the future will lead to implementing system wide process improvement steps and safe standard operating procedures for each radiotherapy treatment modality/technique and fulfills our goal of “Effecting Quality While Treating Safely”. RIRAS developed and copyrighted by TSG Innovations Inc.« less

imVisIR - a new tool for high resolution soil characterisation

NASA Astrophysics Data System (ADS)

Steffens, Markus; Buddenbaum, Henning

2014-05-01

The physical and chemical heterogeneities of soils are the source of a vast functional diversity of soil properties in a multitude of spatial domains. But many studies do not consider the spatial variability of soil types, diagnostic horizons and properties. These lateral and vertical heterogeneities of soils or soil horizons are mostly neglected due to the limitations in the available soil data and missing techniques to gather the information. We present an imaging technique that enables the spatially accurate, high resolution assessment (63×63 µm2 per pixel) of complete soil profiles consisting of mineral and organic horizons. We used a stainless steel box (100×100×300 mm3) to sample various soil types and a hyperspectral camera to record the bidirectional reflectance of the large undisturbed soil samples in the visible and near infrared (Vis-NIR) part of the electromagnetic spectrum (400-1000 nm in 160 spectral bands). Various statistical, geostatistical and image processing tools were used to 1) assess the spatial variability of the soil profile as a whole; 2) classify diagnostic horizons; 3) extrapolate elemental concentrations of small sampling areas to the complete image and calculate high resolution chemometric maps of up to five elements (C, N, Al, Fe, Mn); and 4) derive maps of the chemical composition of soil organic matter. Imaging Vis-NIR (imVisIR) has the potential to significantly improve soil classification, assessment of elemental budgets and balances and the understanding of soil forming processes and mechanisms. It will help to identify areas of interest for techniques working on smaller scales and enable the upscaling and referencing of this information to the complete pedon.

Posterior distraction reduction and occipitocervical fixation for the treatment of basilar invagination and atlantoaxial dislocation.

PubMed

Meng, Yang; Chen, Hua; Lou, Jigang; Rong, Xin; Wang, Beiyu; Deng, Yuxiao; Ding, Chen; Hong, Ying; Liu, Hao

2016-01-01

To introduce a novel distraction technique for the treatment of basilar invagination (BI) and atlantoaxial dislocation (AAD) via a posterior-only approach. Twenty-one consecutive patients with BI and AAD who underwent posterior distraction reduction and occipitocervical fixation between January 2009 and June 2013 were enrolled in the present study. This novel distraction technique included two steps. First, the distraction between the occipitocervical junction of the rod (OCJR) and the occipital screws was performed to achieve horizontal and partial vertical reduction. Secondly, the distraction was performed between the C2 screws and OCJR to achieve complete vertical reduction. The pre- and postoperative JOA score, the extent of reduction, the fusion status, and the complications were recorded and analyzed. The mean follow-up was 18.3 months with a range of 10-32 months. No patient incurred neurovascular injury during surgery. The mean JOA score at the last follow-up (15.4) showed significant improvement (P<0.01) compared with the pre-operative parameters (11.2). Complete horizontal reduction was achieved in 18 patients (85.7%), and complete vertical reduction was achieved in 17 patients (80.9%). The rest patients are all received greater than 50% horizontal and vertical reduction. Solid fusion was achieved in 20 patients (95.2%). Mild dysphagia was observed in two patients. One patient suffered from postoperative fever and pulmonary infection. This novel distraction technique may provide satisfactory reduction via a posterior-only approach without exposure of the C1/2 facet joint. Therefore, it is a safe and effective method for the treatment of BI with AAD. Copyright © 2015 Elsevier B.V. All rights reserved.

A workflow learning model to improve geovisual analytics utility

PubMed Central

Roth, Robert E; MacEachren, Alan M; McCabe, Craig A

2011-01-01

Introduction This paper describes the design and implementation of the G-EX Portal Learn Module, a web-based, geocollaborative application for organizing and distributing digital learning artifacts. G-EX falls into the broader context of geovisual analytics, a new research area with the goal of supporting visually-mediated reasoning about large, multivariate, spatiotemporal information. Because this information is unprecedented in amount and complexity, GIScientists are tasked with the development of new tools and techniques to make sense of it. Our research addresses the challenge of implementing these geovisual analytics tools and techniques in a useful manner. Objectives The objective of this paper is to develop and implement a method for improving the utility of geovisual analytics software. The success of software is measured by its usability (i.e., how easy the software is to use?) and utility (i.e., how useful the software is). The usability and utility of software can be improved by refining the software, increasing user knowledge about the software, or both. It is difficult to achieve transparent usability (i.e., software that is immediately usable without training) of geovisual analytics software because of the inherent complexity of the included tools and techniques. In these situations, improving user knowledge about the software through the provision of learning artifacts is as important, if not more so, than iterative refinement of the software itself. Therefore, our approach to improving utility is focused on educating the user. Methodology The research reported here was completed in two steps. First, we developed a model for learning about geovisual analytics software. Many existing digital learning models assist only with use of the software to complete a specific task and provide limited assistance with its actual application. To move beyond task-oriented learning about software use, we propose a process-oriented approach to learning based on the concept of scientific workflows. Second, we implemented an interface in the G-EX Portal Learn Module to demonstrate the workflow learning model. The workflow interface allows users to drag learning artifacts uploaded to the G-EX Portal onto a central whiteboard and then annotate the workflow using text and drawing tools. Once completed, users can visit the assembled workflow to get an idea of the kind, number, and scale of analysis steps, view individual learning artifacts associated with each node in the workflow, and ask questions about the overall workflow or individual learning artifacts through the associated forums. An example learning workflow in the domain of epidemiology is provided to demonstrate the effectiveness of the approach. Results/Conclusions In the context of geovisual analytics, GIScientists are not only responsible for developing software to facilitate visually-mediated reasoning about large and complex spatiotemporal information, but also for ensuring that this software works. The workflow learning model discussed in this paper and demonstrated in the G-EX Portal Learn Module is one approach to improving the utility of geovisual analytics software. While development of the G-EX Portal Learn Module is ongoing, we expect to release the G-EX Portal Learn Module by Summer 2009. PMID:21983545

A workflow learning model to improve geovisual analytics utility.

PubMed

Roth, Robert E; Maceachren, Alan M; McCabe, Craig A

2009-01-01

INTRODUCTION: This paper describes the design and implementation of the G-EX Portal Learn Module, a web-based, geocollaborative application for organizing and distributing digital learning artifacts. G-EX falls into the broader context of geovisual analytics, a new research area with the goal of supporting visually-mediated reasoning about large, multivariate, spatiotemporal information. Because this information is unprecedented in amount and complexity, GIScientists are tasked with the development of new tools and techniques to make sense of it. Our research addresses the challenge of implementing these geovisual analytics tools and techniques in a useful manner. OBJECTIVES: The objective of this paper is to develop and implement a method for improving the utility of geovisual analytics software. The success of software is measured by its usability (i.e., how easy the software is to use?) and utility (i.e., how useful the software is). The usability and utility of software can be improved by refining the software, increasing user knowledge about the software, or both. It is difficult to achieve transparent usability (i.e., software that is immediately usable without training) of geovisual analytics software because of the inherent complexity of the included tools and techniques. In these situations, improving user knowledge about the software through the provision of learning artifacts is as important, if not more so, than iterative refinement of the software itself. Therefore, our approach to improving utility is focused on educating the user. METHODOLOGY: The research reported here was completed in two steps. First, we developed a model for learning about geovisual analytics software. Many existing digital learning models assist only with use of the software to complete a specific task and provide limited assistance with its actual application. To move beyond task-oriented learning about software use, we propose a process-oriented approach to learning based on the concept of scientific workflows. Second, we implemented an interface in the G-EX Portal Learn Module to demonstrate the workflow learning model. The workflow interface allows users to drag learning artifacts uploaded to the G-EX Portal onto a central whiteboard and then annotate the workflow using text and drawing tools. Once completed, users can visit the assembled workflow to get an idea of the kind, number, and scale of analysis steps, view individual learning artifacts associated with each node in the workflow, and ask questions about the overall workflow or individual learning artifacts through the associated forums. An example learning workflow in the domain of epidemiology is provided to demonstrate the effectiveness of the approach. RESULTS/CONCLUSIONS: In the context of geovisual analytics, GIScientists are not only responsible for developing software to facilitate visually-mediated reasoning about large and complex spatiotemporal information, but also for ensuring that this software works. The workflow learning model discussed in this paper and demonstrated in the G-EX Portal Learn Module is one approach to improving the utility of geovisual analytics software. While development of the G-EX Portal Learn Module is ongoing, we expect to release the G-EX Portal Learn Module by Summer 2009.

Hirschsprung's disease management: from multi staged operation to single staged transanal pull-through.

PubMed

Wang, J X; Dahal, G R

2009-06-01

Hirschsprung's disease (HD) is a common congenital disease of colorectum. Although it was described more than one century ago, the effective treatment was established only half a century later. The initially treatment consisted of preoperative diverting colostomy, followed by definite pull-through and closure of colostomy on later date. A variety of procedures like Swenson, Duhamel, Rehbein and Soave were evolved with time. With the better understanding of pathogenesis and improvement on surgical technique, now the operation has become less extensive. In recent days, the classical 3 staged procedure is replaced by single staged procedure. All the procedure can be completed transanally. Since De la Torre in 1998, first reported total transanal endorectal pull-through, it became the most popular technique for the treatment of HD.

Neutron beam measurement of industrial polymer materials for composition and bulk integrity

NASA Astrophysics Data System (ADS)

Rogante, M.; Rosta, L.; Heaton, M. E.

2013-10-01

Neutron beam techniques, among other non-destructive diagnostics, are particularly irreplaceable in the complete analysis of industrial materials and components when supplying fundamental information. In this paper, nanoscale small-angle neutron scattering analysis and prompt gamma activation analysis for the characterization of industrial polymers are considered. The basic theoretical aspects are briefly introduced and some applications are presented. The investigations of the SU-8 polymer in axial airflow microturbines—i.e. microelectromechanical systems—are presented foremost. Also presented are full and feasibility studies on polyurethanes, composites based on cross-linked polymers reinforced by carbon fibres and polymer cement concrete. The obtained results have provided a substantial contribution to the improvement of the considered materials, and indeed confirmed the industrial applicability of the adopted techniques in the analysis of polymers.

Accelerated wavefront determination technique for optical imaging through scattering medium

NASA Astrophysics Data System (ADS)

He, Hexiang; Wong, Kam Sing

2016-03-01

Wavefront shaping applied on scattering light is a promising optical imaging method in biological systems. Normally, optimized modulation can be obtained by a Liquid-Crystal Spatial Light Modulator (LC-SLM) and CCD hardware iteration. Here we introduce an improved method for this optimization process. The core of the proposed method is to firstly detect the disturbed wavefront, and then to calculate the modulation phase pattern by computer simulation. In particular, phase retrieval method together with phase conjugation is most effective. In this way, the LC-SLM based system can complete the wavefront optimization and imaging restoration within several seconds which is two orders of magnitude faster than the conventional technique. The experimental results show good imaging quality and may contribute to real time imaging recovery in scattering medium.

SRB Environment Evaluation and Analysis. Volume 2: RSRB Joint Filling Test/Analysis Improvements

NASA Technical Reports Server (NTRS)

Knox, E. C.; Woods, G. Hamilton

1991-01-01

Following the Challenger accident a very comprehensive solid rocket booster (SRB) redesign program was initiated. One objective of the program was to develop expertise at NASA/MSFC in the techniques for analyzing the flow of hot gases in the SRB joints. Several test programs were undertaken to provide a data base of joint performance with manufactured defects in the joints to allow hot gases to fill the joints. This data base was used also to develop the analytical techniques. Some of the test programs were Joint Environment Simulator (JES), Nozzle Joint Environment Simulator (NJES), Transient Pressure Test Article (TPTA), and Seventy-Pound Charge (SPC). In 1988 the TPTA test hardware was moved from the Utah site to MSFC and several RSRM tests were scheduled, to be followed by tests for the ASRM program. REMTECH Inc. supported these activities with pretest estimates of the flow conditions in the test joints, and post-test analysis and evaluation of the measurements. During this support REMTECH identified deficiencies in the gas-measurement instrumentation that existed in the TPTA hardware, made recommendations for its replacement, and identified improvements to the analytical tools used in the test support. Only one test was completed under the TPTA RSRM test program, and those scheduled for the ASRM were rescheduled to a time after the expiration of this contract. The attention of this effort was directed toward improvements in the analytical techniques in preparation for when the ASRM program begins.

Two-Trocar Cholecystectomy by Strategic Laparoscopy for Improved Cosmesis (SLIC)

PubMed Central

Mirhaidari, Shayda; Pozsgay, Mark; Standerwick, Andrew; Bohon, Ashley; Zografakis, John G.

2013-01-01

Background and Objectives: Until the advent of single-incision laparoscopic surgery, few advances were aimed at improving cosmesis with laparoscopic cholecystectomy. Criticisms of the single-incision laparoscopic surgery technique include a larger incision and increased incidence of wound-related complications. We present our initial experience with a novel technique aimed at performing strategic laparoscopy for improved cosmesis (SLIC) for cholecystectomy. Methods: Twenty-five patients with biliary symptoms were selected for SLIC cholecystectomy. Access to the abdomen was obtained with a 5-mm optical trocar in the left upper quadrant and a 5-mm trocar in the umbilicus. Retraction was performed by a transabdominal suture in the dome of the gallbladder and a needlescopic grasper. Age, American Society of Anesthesiologists score, body mass index, operative time, length of stay, pathology results, and short-term complications at follow-up were prospectively recorded. Results: The 25 female patients had a mean age of 34.3 years and mean body mass index of 24 kg/m2. American Society of Anesthesiologists scores ranged from 1 to 3. The mean operative time was 51.3 minutes. Pathology revealed chronic cholecystitis in all patients. All procedures were performed on an outpatient basis. The only complication was one ultrasonography-documented deep vein thrombosis. All 25 planned SLIC cholecystectomies were successfully completed. Conclusions: SLIC cholecystectomy is feasible and safe. This technique decreases the cumulative incision length, as well as the number of incisions, leading to very desirable cosmetic results in patients with a favorable body habitus and surgical history. PMID:24398200

Fostering evidence-based quality improvement for patient-centered medical homes: Initiating local quality councils to transform primary care.

PubMed

Stockdale, Susan E; Zuchowski, Jessica; Rubenstein, Lisa V; Sapir, Negar; Yano, Elizabeth M; Altman, Lisa; Fickel, Jacqueline J; McDougall, Skye; Dresselhaus, Timothy; Hamilton, Alison B

Although the patient-centered medical home endorses quality improvement principles, methods for supporting ongoing, systematic primary care quality improvement have not been evaluated. We introduced primary care quality councils at six Veterans Health Administration sites as an organizational intervention with three key design elements: (a) fostering interdisciplinary quality improvement leadership, (b) establishing a structured quality improvement process, and (c) facilitating organizationally aligned frontline quality improvement innovation. Our evaluation objectives were to (a) assess design element implementation, (b) describe implementation barriers and facilitators, and (c) assess successful quality improvement project completion and spread. We analyzed administrative records and conducted interviews with 85 organizational leaders. We developed and applied criteria for assessing design element implementation using hybrid deductive/inductive analytic techniques. All quality councils implemented interdisciplinary leadership and a structured quality improvement process, and all but one completed at least one quality improvement project and a toolkit for spreading improvements. Quality councils were perceived as most effective when service line leaders had well-functioning interdisciplinary communication. Matching positions within leadership hierarchies with appropriate supportive roles facilitated frontline quality improvement efforts. Two key resources were (a) a dedicated internal facilitator with project management, data collection, and presentation skills and (b) support for preparing customized data reports for identifying and addressing practice level quality issues. Overall, quality councils successfully cultivated interdisciplinary, multilevel primary care quality improvement leadership with accountability mechanisms and generated frontline innovations suitable for spread. Practice level performance data and quality improvement project management support were critical. In order to successfully facilitate systematic, sustainable primary care quality improvement, regional and executive health care system leaders should engage interdisciplinary practice level leadership in a priority-setting process that encourages frontline innovation and establish local structures such as quality councils to coordinate quality improvement initiatives, ensure accountability, and promote spread of best practices.

Developing a Virtual Teach-To-Goal™ Inhaler Technique Learning Module: A Mixed Methods Approach.

PubMed

Wu, Meng; Woodrick, Nicole M; Arora, Vineet M; Farnan, Jeanne M; Press, Valerie G

Most hospitalized patients with asthma or chronic obstructive pulmonary disease misuse respiratory inhalers. An in-person educational strategy, teach-to-goal (TTG), improves inpatients' inhaler technique. To develop an effective, portable education intervention that remains accessible to hospitalized patients postdischarge for reinforcement of proper inhaler technique. A mixed methods approach at an urban academic hospital was used to iteratively develop, modify, and test a virtual teach-to-goal ™ (V-TTG ™ ) educational intervention using patient end-user feedback. A survey examined access and willingness to use technology for self-management education. Focus groups evaluated patients' feedback on access, functionality, and quality of V-TTG ™ . Forty-eight participants completed the survey, with most reporting having Internet access; 77% used the Internet at home and 82% used the Internet at least once every few weeks. More than 80% reported that they were somewhat or very likely to use V-TTG ™ to gain skills to improve their health. Most participants reported smartphone access (73%); half owned laptop computers (52%). Participants with asthma versus chronic obstructive pulmonary disease were more likely to own a smartphone, have a data plan, and have daily Internet use (P < .05). Nine focus groups (n = 25) identified themes for each domain: access-platform and delivery, Internet access, and technological literacy; functionality-usefulness, content, and teaching strategy; and quality-clarity, ease of use, length, and likability. V-TTG ™ is a promising educational tool for improving patients' inhaler technique, iteratively developed and refined with patient input. Patients in our urban, academic hospital overwhelmingly reported access to platforms and willingness to use V-TTG ™ for health education. Copyright © 2017 American Academy of Allergy, Asthma & Immunology. Published by Elsevier Inc. All rights reserved.

Animal models for the study of inflammatory bowel diseases: a meta-analysis on modalities for imaging inflammatory lesions.

PubMed

Auletta, Sveva; Bonfiglio, Rita; Wunder, Andreas; Varani, Michela; Galli, Filippo; Borri, Filippo; Scimeca, Manuel; Niessen, Heiko G; Schönberger, Tanja; Bonanno, Elena

2018-03-01

Inflammatory bowel diseases are lifelong disorders affecting the gastrointestinal tract characterized by intermittent disease flares and periods of remission with a progressive and destructive nature. Unfortunately, the exact etiology is still not completely known, therefore a causal therapy to cure the disease is not yet available. Current treatment options mainly encompass the use of non-specific anti-inflammatory agents and immunosuppressive drugs that cause significant side effects that often have a negative impact on patients' quality of life. As the majority of patients need a long-term follow-up it would be ideal to rely on a non-invasive technique with good compliance. Currently, the gold standard diagnostic tools for managing IBD are represented by invasive procedures such as colonoscopy and histopathology. Nevertheless, recent advances in imaging technology continue to improve the ability of imaging techniques to non-invasively monitor disease activity and treatment response in preclinical models of IBD. Novel and emerging imaging techniques not only allow direct visualization of intestinal inflammation, but also enable molecular imaging and targeting of specific alterations of the inflamed murine mucosa. Furthermore, molecular imaging advances allow us to increase our knowledge on the critical biological pathways involved in disease progression by characterizing in vivo processes at a cellular and molecular level and enabling significant improvements in the understanding of the etiology of IBD. This review presents a critical and updated overview on the imaging advances in animal models of IBD. Our aim is to highlight the potential beneficial impact and the range of applications that imaging techniques could offer for the improvement of the clinical monitoring and management of IBD patients: diagnosis, staging, determination of therapeutic targets, monitoring therapy and evaluation of the prognosis, personalized therapeutic approaches.

Improving recruitment and retention for an online randomized controlled trial: experience from the Youthnet study.

PubMed

Bull, S S; Vallejos, D; Levine, D; Ortiz, C

2008-09-01

The objective of the study was to present recruitment and retention findings for an Internet based HIV prevention trial evaluated using a randomized controlled design among 15-25-year-olds accessing a website on the Internet. We used a combination of automated electronic and personalized approaches to increase and diversify recruitment, verify participant eligibility and increase retention. We posted 3.5 million banner advertisements, 9354 individuals clicked on the advertisement, 8950 completed an eligibility screener and 3298 a baseline survey; we flagged 675 of these as suspicious and enrolled 2623 individuals. Of these, 2082 (79%) completed a follow-up at one-month and 1398 (53%) completed a two-month follow-up. This retention rate is the highest we have seen for an Internet-based HIV-prevention trial. Our procedures can be replicated in other trials. We stress the importance of using a combination of automated and personalized techniques to increase enrollment, verify eligibility and promote retention.

Commitment language and homework completion in a behavioral employment program for gang-affiliated youth.

PubMed

Smith, Caitlin; Huey, Stanley J; McDaniel, Dawn D

2015-05-01

Research with substance-abusing samples suggests that eliciting commitment language during treatment may improve motivation to change, increase treatment engagement, and promote positive treatment outcomes. However, the relationship between in-session client language and treatment success is not well-understood for youth offender populations. This study evaluated the relationship between commitment language, treatment engagement (i.e., homework completion), and weekly employment outcomes for six gang-affiliated juvenile offenders participating in an employment counseling intervention. Weekly counseling sessions were audio-recorded, transcribed, and coded for commitment language strength. Multilevel models were fit to the data to examine the relationship between commitment language and counseling homework or employment outcomes within participants over time. Commitment language strength predicted subsequent homework completion but not weekly employment. These findings imply that gang-affiliated delinquent youth who express motivation to change during employment counseling will be more likely to comply with counselor-initiated homework. Further research on counselor techniques for promoting commitment language among juvenile gang offenders is needed. © The Author(s) 2013.

New treatments for localized prostate cancer.

PubMed

Marberger, Michael; Carroll, Peter R; Zelefsky, Michael J; Coleman, Jonathan A; Hricak, Hedvig; Scardino, Peter T; Abenhaim, Lucien L

2008-12-01

Interest in focal therapy for prostate cancer has recently been renewed owing to downward stage migration, improved biopsy and imaging techniques, and the prevalence of either unifocal cancer or a dominant cancer with secondary tumors of minimal malignant potential. Several techniques have potential for focal ablation of prostate cancer. Cryotherapy has been used for some time as primary therapy for complete ablation of the prostate or local recurrence after radiotherapy. Enthusiasm for cryotherapy as the primary therapy has been tempered by the uncertainty about complete ablation of the cancer, the frequent persistence of measurable prostate-specific antigen levels after the procedure, and a high rate of erectile dysfunction. Studies have reported "focal ablation" of prostate cancer with cryotherapy, targeting 1 side of the gland to eliminate a cancer confined to that side with less risk of urinary or sexual complications. Whether cryotherapy has sufficient power to eradicate focal cancer and can be targeted with sufficient accuracy to avoid damage to surrounding structures remains to be demonstrated in prospective clinical trials. High-intensity focused ultrasound (HIFU) has been used widely in Europe for complete ablation of the prostate, especially in elderly men who are unwilling or unable to undergo radical therapy. For low- or intermediate-risk cancer, the short- and intermediate-term oncologic results have been acceptable but need confirmation in prospective multicenter trials presently underway. Whole gland therapy with transrectal ultrasound guidance has been associated with a high risk of acute urinary symptoms, often requiring transurethral resection before or after HIFU. Adverse effects on erectile function seem likely after a therapy that depends on heat to eradicate the cancer, but erectile function after HIFU has not been adequately documented with patient-reported questionnaires. HIFU holds promise for focal ablation of prostate cancer. As with cryotherapy, focal HIFU should reduce the adverse sexual, urinary, and bowel effects of whole gland ablation. New techniques are being developed to allow HIFU treatment under real-time guidance using magnetic resonance imaging, which could improve the precision and reduce the adverse effects further. Another promising technique, currently in clinical trials, is vascular-targeted photodynamic therapy, which has been used for whole gland ablation of locally recurrent cancer after radiotherapy and, more recently, for focal ablation of previously untreated cancer. In combination with a new, systemically administered photodynamic agent, laser light is delivered through fibers introduced into the prostate under ultrasound guidance. This technique does not heat the prostate but destroys the endothelial cells and cancer by activating the photodynamic agent. Damage to surrounding structures appears to be limited and can be controlled by the duration and intensity of the light. We have reviewed the principles of focal therapy and these new therapeutic modalities.

Research progress of plant population genomics based on high-throughput sequencing.

PubMed

Wang, Yun-sheng

2016-08-01

Population genomics, a new paradigm for population genetics, combine the concepts and techniques of genomics with the theoretical system of population genetics and improve our understanding of microevolution through identification of site-specific effect and genome-wide effects using genome-wide polymorphic sites genotypeing. With the appearance and improvement of the next generation high-throughput sequencing technology, the numbers of plant species with complete genome sequences increased rapidly and large scale resequencing has also been carried out in recent years. Parallel sequencing has also been done in some plant species without complete genome sequences. These studies have greatly promoted the development of population genomics and deepened our understanding of the genetic diversity, level of linking disequilibium, selection effect, demographical history and molecular mechanism of complex traits of relevant plant population at a genomic level. In this review, I briely introduced the concept and research methods of population genomics and summarized the research progress of plant population genomics based on high-throughput sequencing. I also discussed the prospect as well as existing problems of plant population genomics in order to provide references for related studies.

Delivering quality of care while managing the interests of all stakeholders.

PubMed

Stopper, Andrea; Raddatz, Agnieszka; Grassmann, Aileen; Stuard, Stefano; Menzer, Marcus; Possnien, Gernot; Scatizzi, Laura; Marcelli, Daniele

2011-01-01

National healthcare systems worldwide face growing challenges to reconcile interests of patients for high-quality medical care and of payers for sustainable and affordable funding. Advances in the provision of renal replacement therapy can only be made by developing and implementing appropriate sophisticated and state-of-the-art business models that include reimbursement schemes for comprehensive care packages. Such business models must succeed in integrating and reconciling the interests of all stakeholders. NephroCare as dialysis provider has adopted and tailored recognized management techniques, i.e. Balanced Scorecard and Kaizen, to achieve these goals. Success of the complete business model package is tangible - strategies initiated to improve treatment quality even at the cost of providers have been translated into win-win scenarios for the complete stakeholder community. Room for improvement exists: the possibility to extend the portfolio of service offerings within the comprehensive care frame, as well as the challenge for achieving a balance between the stability of targets while keeping these up to date concerning new insights. Copyright © 2011 S. Karger AG, Basel.

The Annotated Bibliography and Citation Behavior: Enhancing Student Scholarship in an Undergraduate Biology Course

PubMed Central

Rux, Erika M.; Flaspohler, John A.

2007-01-01

Contemporary undergraduates in the biological sciences have unprecedented access to scientific information. Although many of these students may be savvy technologists, studies from the field of library and information science consistently show that undergraduates often struggle to locate, evaluate, and use high-quality, reputable sources of information. This study demonstrates the efficacy and pedagogical value of a collaborative teaching approach designed to enhance information literacy competencies among undergraduate biology majors who must write a formal scientific research paper. We rely on the triangulation of assessment data to determine the effectiveness of a substantial research paper project completed by students enrolled in an upper-level biology course. After enhancing library-based instruction, adding an annotated bibliography requirement, and using multiple assessment techniques, we show fundamental improvements in students' library research abilities. Ultimately, these improvements make it possible for students to more independently and effectively complete this challenging science-based writing assignment. We document critical information literacy advances in several key areas: student source-type use, annotated bibliography enhancement, plagiarism reduction, as well as student and faculty/librarian satisfaction. PMID:18056306

Biologic Approaches for the Treatment of Partial Tears of the Anterior Cruciate Ligament

PubMed Central

Dallo, Ignacio; Chahla, Jorge; Mitchell, Justin J.; Pascual-Garrido, Cecilia; Feagin, John A.; LaPrade, Robert F.

2017-01-01

Background: Anterior cruciate ligament reconstruction (ACLR) has been established as the gold standard for treatment of complete ruptures of the anterior cruciate ligament (ACL) in active, symptomatic individuals. In contrast, treatment of partial tears of the ACL remains controversial. Biologically augmented ACL-repair techniques are expanding in an attempt to regenerate and improve healing and outcomes of both the native ACL and the reconstructed graft tissue. Purpose: To review the biologic treatment options for partial tears of the ACL. Study Design: Review. Methods: A literature review was performed that included searches of PubMed, Medline, and Cochrane databases using the following keywords: partial tear of the ACL, ACL repair, bone marrow concentrate, growth factors/healing enhancement, platelet-rich plasma (PRP), stem cell therapy. Results: The use of novel biologic ACL repair techniques, including growth factors, PRP, stem cells, and bioscaffolds, have been reported to result in promising preclinical and short-term clinical outcomes. Conclusion: The potential benefits of these biological augmentation approaches for partial ACL tears are improved healing, better proprioception, and a faster return to sport and activities of daily living when compared with standard reconstruction procedures. However, long-term studies with larger cohorts of patients and with technique validation are necessary to assess the real effect of these approaches. PMID:28210653

Role of Catheter-directed Thrombolysis in Management of Iliofemoral Deep Venous Thrombosis.

PubMed

Chen, James X; Sudheendra, Deepak; Stavropoulos, S William; Nadolski, Gregory J

2016-01-01

The treatment for iliofemoral deep venous thrombosis (DVT) is challenging, as the use of anticoagulation alone can be insufficient for restoring venous patency and thus lead to prolongation of acute symptoms and an increased risk of chronic complications, including venous insufficiency and postthrombotic syndrome (PTS). In these cases, earlier and more complete thrombus removal can ameliorate acute symptoms and reduce long-term sequelae. Endovascular therapies involving the use of pharmacologic, mechanical, and combined pharmacomechanical modalities have been developed to achieve these goals. The most frequently used of these techniques, catheter-directed thrombolysis (CDT), involves the infusion of a thrombolytic agent through a multiple-side-hole catheter placed within the thrombosed vein to achieve high local doses and thereby break down the clot while minimizing systemic thrombolytic agent exposure. Randomized controlled trial results have indicated decreased PTS rates and improved venous patency rates in patients treated with CDT compared with these rates in patients treated with anticoagulation. The use of newer pharmacomechanical techniques, as compared with conventional CDT, reduces procedural times and thrombolytic agent doses and is the subject of ongoing investigations. Endovascular thrombus removal techniques offer a means to improve venous valvular function and decrease the risk of debilitating long-term complications such as PTS and are a promising option for treating patients with iliofemoral DVT. (©)RSNA, 2016.

Experience of collaboration between a Dutch surgical team in a Ghanaian Orthopaedic Teaching Hospital.

PubMed

Timmers, T K; Kortekaas, E; Beyer, Bpc; Huizinga, E; V Hezik van, S M; Twagirayezu, E; Bemelman, M

2016-09-01

Surgery is an indivisible, indispensable part of healthcare. In Africa, surgery may be thought of as the neglected stepchild of global public health. We describe our experience over a 3-year period of intensive collaboration between specialized teams from a Dutch hospital and local teams of an orthopaedic hospital in Effiduase-Koforidua, Ghana. During 2010-2012, medical teams from our hospital were deployed to St. Joseph's Hospital. These teams were completely self-supporting. They were encouraged to work together with the local-staff. Apart from clinical work, effort was also spent on education/ teaching operation techniques/ regional anaesthesia techniques/ scrubbing techniques/ and principles around sterility. Knowledge and quality of care has improved. Nevertheless, the overall level of quality of care still lags behind compared to what we see in the Western world. This is mainly due to financial constraints; restricting the capacity to purchase good equipment, maintaining it, and providing regular education. The relief provided by institutions like Care-to-Move is very valuable and essential to improve the level of healthcare. The hospital has evolved to such a high level that general European teams have become redundant. Focused and dedicated teams should be the next step of support within the nearby future.

[Reconstruction of big rotator cuff ruptures. A new technique of tendon refixation with the corkscrew suture anchor system].

PubMed

Kessler, M A; Lichtenberg, S; Habermeyer, P

2003-10-01

Tendon retraction and fatty degeneration is a major problem in repair of massive rotator cuff tears. Especially in the transosseous refixation technique, a tension-free refixation cannot be obtained in all cases. The purpose of this prospective study was to evaluate the postoperative results using a new tension-free reinsertion technique with a Corkscrew suture anchor system. Thirty patients (25 males, 5 females) with complete one and two tendon tears underwent open rotator cuff repair (rupture of one tendon: n=14, 47%). The torn tendons were mobilized and reinserted medially to reduce tension. Medialization was achieved by inserting tendon near the osteochondral border in a bony trough. The number of implanted suture anchors ranged from 2 to 6 (mean: 3.56). The mean age was 56 years (39-68 years) with a follow-up of 24 months (17-33 months). In one patient physical and sonographic examination showed a complete and in two patients a partial rerupture. A temporarily frozen shoulder occurred in two cases. No infection or rejection response was seen. In no case was revision surgery necessary. No displacement or loosening of the Corkscrew anchors was noticed. The constant score improved from 45 points preoperatively to 85 points at the time of follow-up (mean). The Corkscrew suture anchor system in combination with the new suture technique offers the possibility of a stable reinsertion even in reduced calcified bone structure. This facilitates good conditions for stable fibroblastic healing. Our midterm results show good osseous union combined with a low rerupture rate.

Piezosurgery in External Dacryocystorhinostomy.

PubMed

Czyz, Craig N; Fowler, Amy M; Dutton, Jonathan J; Cahill, Kenneth V; Foster, Jill A; Hill, Robert H; Everman, Kelly R; Nabavi, Cameron B

Dacryocystorhinostomy (DCR) can be performed via an external or endoscopic approach. The use of ultrasonic or piezosurgery has been well described for endoscopic DCRs but is lacking for external DCRs. This study presents a case series of external DCRs performed using piezosurgery evaluating results and complications. Prospective, consecutive case series of patients undergoing primary external DCR for lacrimal drainage insufficiency. A standard external DCR technique was used using 1 of 2 piezosurgery systems for all bone incision. All patients received silicone intubation to the lacrimal system. Surgical outcome was measured in terms of patient-reported epiphora as follows: 1) complete resolution, 2) improvement >50%, 3) improvement <50%, and 4) No improvement. Intra and postoperative complications were also recorded. Fifty-two patients, 14 male and 38 female, were included in the study, with 2 patients having bilateral surgery. The average age of the patients was 55.8 years. The average length of follow up was 221 days. Surgical outcomes showed 72% of patients with complete resolution of epiphora and 21% with >50% improvement. There were 4 patients (7%) who had <50% improvement. There was 1 (2%) intraoperative complication and 2 (4%) postoperative complications recorded. Piezourgery is a viable modality for performing external DCRs. The lack of surgical complications shows a potential for decreased soft tissues damage. The surgical success rate based on patient-reported epiphora is similar to those published for mechanical external DCRs. This modality may benefit the novice surgeon in the reduction of soft and mucosal tissue damage.

Comparative evaluation of surgical modalities for coverage of gingival recession: An Armed Forces Medical College perspective

PubMed Central

Gilbert, Luiram R.; Lohra, Parul; Mandlik, V.B.; Rath, S.K.; Jha, A.K.

2012-01-01

Background Esthetics represents an inseparable part of today's oral therapy, and several procedures have been proposed to preserve or enhance it. Gingival recessions may cause hypersensitivity, impaired esthetics and root caries. Keeping in mind patient's desire for improved esthetics and other related problems, every effort should be made to achieve complete root coverage. Methods Different types of modalities have been introduced to treat gingival recession including displaced flaps, free gingival graft, connective tissue graft, different type of barrier membranes and combination of different techniques. The aim of this study was to compare the commonly used techniques for gingival recession coverage and evaluate the results obtained. 73 subjects were selected for the present study who were randomly divided into four groups and were followed at baseline and 180 days where following parameters were recorded: (a) Assessment of gingival recession depth (RD); (b) Assessment of pocket depth (PD); (c) Assessment of clinical attachment level (CAL) and (d) Assessment of width of attached gingiva (WAG). Results Results of this study showed statistically significant reduction of gingival recession, with concomitant attachment gain, following treatment with all tested surgical techniques. However, SCTG with CAF technique showed the highest percentage gain in coverage of recession depth as well as gain in keratinized gingiva. Similar results were obtained with CAF alone. The use of GTR and other techniques showed less predictable coverage and gain in keratinized gingiva. Conclusion Connective tissue grafts were statistically significantly superior to guided tissue regeneration for improvement in gingival recession reduction. PMID:25609865

Status and Perspectives of Neutron Imaging Facilities

NASA Astrophysics Data System (ADS)

Lehmann, E.; Trtik, P.; Ridikas, D.

The methodology and the application range of neutron imaging techniques have been significantly improved at numerous facilities worldwide in the last decades. This progress has been achieved by new detector systems, the setup of dedicated, optimized and flexible beam lines and the much better understanding of the complete imaging process thanks to complementary simulations. Furthermore, new applications and research topics were found and implemented. However, since the quality and the number of neutron imaging facilities depend much on the access to suitable beam ports, there is still an enormous potential to implement state-of-the-art neutron imaging techniques at many more facilities. On the one hand, there are prominent and powerful sources which do not intend/accept the implementation of neutron imaging techniques due to the priorities set for neutron scattering and irradiation techniques exclusively. On the other hand, there are modern and useful devices which remain under-utilized and have either not the capacity or not the know-how to develop attractive user programs and/or industrial partnerships. In this overview of the international status of neutron imaging facilities, we will specify details about the current situation.

Influence of computational fluid dynamics on experimental aerospace facilities: A fifteen year projection

NASA Technical Reports Server (NTRS)

1983-01-01

An assessment was made of the impact of developments in computational fluid dynamics (CFD) on the traditional role of aerospace ground test facilities over the next fifteen years. With improvements in CFD and more powerful scientific computers projected over this period it is expected to have the capability to compute the flow over a complete aircraft at a unit cost three orders of magnitude lower than presently possible. Over the same period improvements in ground test facilities will progress by application of computational techniques including CFD to data acquisition, facility operational efficiency, and simulation of the light envelope; however, no dramatic change in unit cost is expected as greater efficiency will be countered by higher energy and labor costs.

Neutron Tomography at the Los Alamos Neutron Science Center

DOE Office of Scientific and Technical Information (OSTI.GOV)

Myers, William Riley

Neutron imaging is an incredibly powerful tool for non-destructive sample characterization and materials science. Neutron tomography is one technique that results in a three-dimensional model of the sample, representing the interaction of the neutrons with the sample. This relies both on reliable data acquisition and on image processing after acquisition. Over the course of the project, the focus has changed from the former to the latter, culminating in a large-scale reconstruction of a meter-long fossilized skull. The full reconstruction is not yet complete, though tools have been developed to improve the speed and accuracy of the reconstruction. This project helpsmore » to improve the capabilities of LANSCE and LANL with regards to imaging large or unwieldy objects.« less

Optimized feline vitrectomy technique for therapeutic stem cell delivery to the inner retina.

PubMed

Jayaram, Hari; Becker, Silke; Eastlake, Karen; Jones, Megan F; Charteris, David G; Limb, G Astrid

2014-07-01

To describe an optimized surgical technique for feline vitrectomy which reduces bleeding and aids posterior gel clearance in order to facilitate stem cell delivery to the inner retina using cellular scaffolds. Three-port pars plana vitrectomies were performed in six-specific pathogen-free domestic cats using an optimized surgical technique to improve access and minimize severe intraoperative bleeding. The surgical procedure was successfully completed in all six animals. Lens sparing vitrectomy resulted in peripheral lens touch in one of three animals but without cataract formation. Transient bleeding from sclerotomies, which was readily controlled, was seen in two of the six animals. No cases of vitreous hemorrhage, severe postoperative inflammation, retinal detachment, or endophthalmitis were observed during postoperative follow-up. Three-port pars plana vitrectomy can be performed successfully in the cat in a safe and controlled manner when the appropriate precautions are taken to minimize the risk of developing intraoperative hemorrhage. This technique may facilitate the use of feline models of inner retinal degeneration for the development of stem cell transplantation techniques using cellular scaffolds. © 2014 The Authors Veterinary Ophthalmology published by Wiley Periodicals, Inc. on behalf of American College of Veterinary Ophthalmologists.

Improving Pattern Recognition and Neural Network Algorithms with Applications to Solar Panel Energy Optimization

NASA Astrophysics Data System (ADS)

Zamora Ramos, Ernesto

Artificial Intelligence is a big part of automation and with today's technological advances, artificial intelligence has taken great strides towards positioning itself as the technology of the future to control, enhance and perfect automation. Computer vision includes pattern recognition and classification and machine learning. Computer vision is at the core of decision making and it is a vast and fruitful branch of artificial intelligence. In this work, we expose novel algorithms and techniques built upon existing technologies to improve pattern recognition and neural network training, initially motivated by a multidisciplinary effort to build a robot that helps maintain and optimize solar panel energy production. Our contributions detail an improved non-linear pre-processing technique to enhance poorly illuminated images based on modifications to the standard histogram equalization for an image. While the original motivation was to improve nocturnal navigation, the results have applications in surveillance, search and rescue, medical imaging enhancing, and many others. We created a vision system for precise camera distance positioning motivated to correctly locate the robot for capture of solar panel images for classification. The classification algorithm marks solar panels as clean or dirty for later processing. Our algorithm extends past image classification and, based on historical and experimental data, it identifies the optimal moment in which to perform maintenance on marked solar panels as to minimize the energy and profit loss. In order to improve upon the classification algorithm, we delved into feedforward neural networks because of their recent advancements, proven universal approximation and classification capabilities, and excellent recognition rates. We explore state-of-the-art neural network training techniques offering pointers and insights, culminating on the implementation of a complete library with support for modern deep learning architectures, multilayer percepterons and convolutional neural networks. Our research with neural networks has encountered a great deal of difficulties regarding hyperparameter estimation for good training convergence rate and accuracy. Most hyperparameters, including architecture, learning rate, regularization, trainable parameters (or weights) initialization, and so on, are chosen via a trial and error process with some educated guesses. However, we developed the first quantitative method to compare weight initialization strategies, a critical hyperparameter choice during training, to estimate among a group of candidate strategies which would make the network converge to the highest classification accuracy faster with high probability. Our method provides a quick, objective measure to compare initialization strategies to select the best possible among them beforehand without having to complete multiple training sessions for each candidate strategy to compare final results.

Comparison of different final impression techniques for management of resorbed mandibular ridge: a case report.

PubMed

Yadav, Bhupender; Jayna, Manisha; Yadav, Harish; Suri, Shrey; Phogat, Shefali; Madan, Reshu

2014-01-01

The history of complete denture impression procedures has been influenced largely by the development of impression materials from which new techniques and ideas arose. The purpose of this study was to compare the retention of complete dentures made by using different impression techniques like conventional, admixed, all green, and functional techniques. The results showed that there was significant difference in retention between the six techniques where functional technique showed the highest mean value of retention followed by elastomeric, all green, and admixed, while cocktail and green stick compound showed the lowest mean value. However, on clinical examination, the retention produced by the six techniques was satisfactory.

Comparison of Different Final Impression Techniques for Management of Resorbed Mandibular Ridge: A Case Report

PubMed Central

Yadav, Bhupender; Jayna, Manisha; Yadav, Harish; Suri, Shrey; Phogat, Shefali; Madan, Reshu

2014-01-01

The history of complete denture impression procedures has been influenced largely by the development of impression materials from which new techniques and ideas arose. The purpose of this study was to compare the retention of complete dentures made by using different impression techniques like conventional, admixed, all green, and functional techniques. The results showed that there was significant difference in retention between the six techniques where functional technique showed the highest mean value of retention followed by elastomeric, all green, and admixed, while cocktail and green stick compound showed the lowest mean value. However, on clinical examination, the retention produced by the six techniques was satisfactory. PMID:25180105

Debulking surgery for elephantiasis nostras with large ectatic podoplanin-negative lymphatic vessels in patients with lipo-lymphedema.

PubMed

Wollina, Uwe; Heinig, Birgit; Schönlebe, Jaqueline; Nowak, Andreas

2014-01-01

Elephantiasis nostras is a rare complication in advanced lipo-lymphedema. While lipedema can be treated by liposuction and lymphedema by decongestive lymphatic therapy, elephantiasis nostras may need debulking surgery. We present 2 cases of advanced lipo-lymphedema complicated by elephantiasis nostras. After tumescent microcannular laser-assisted liposuction both patients underwent a debulking surgery with a modification of Auchincloss-Kim's technique. Histologic examination of the tissue specimen was performed. The surgical treatment was well tolerated and primary healing was uneventful. After primary wound healing and ambulation of the patients, a delayed ulceration with lymphorrhea developed. It was treated by surgical necrectomy and vacuum-assisted closure leading to complete healing. Mobility of the leg was much improved. Histologic examination revealed massive ectatic lymphatic vessels nonreactive for podoplanin. Debulking surgery can be an adjuvant technique for elephantiasis nostras in advanced lipo-lymphedema. Although delayed postoperative wound healing problems were observed, necrectomy and vacuum-assisted closure achieved a complete healing. Histologic data suggest that the ectatic lymphatic vessels in these patients resemble finding in podoplanin knockout mice. The findings would explain the limitations of decongestive lymphatic therapy and tumescent liposuction in such patients and their predisposition to relapsing erysipelas.

Multiscale Simulation of Gas Film Lubrication During Liquid Droplet Collision

NASA Astrophysics Data System (ADS)

Chen, Xiaodong; Khare, Prashant; Ma, Dongjun; Yang, Vigor

2012-02-01

Droplet collision plays an elementary role in dense spray combustion process. When two droplets approach each other, a gas film forms in between. The pressure generated within the film prevents motion of approaching droplets. This fluid mechanics is fluid film lubrication that occurs when opposing bearing surfaces are completely separated by fluid film. The lubrication flow in gas film decides the collision outcome, coalescence or bouncing. Present study focuses on gas film drainage process over a wide range of Weber numbers during equal- and unequal-sized droplet collision. The formulation is based on complete set of conservation equations for both liquid and surrounding gas phases. An improved volume-of-fluid technique, augmented by an adaptive mesh refinement algorithm, is used to track liquid/gas interfaces. A unique thickness-based refinement algorithm based on topology of interfacial flow is developed and implemented to efficiently resolve the multiscale problem. The grid size on interface is up O(10-4) of droplet size with a max resolution of 0.015 μm. An advanced visualization technique using the Ray-tracing methodology is used to gain direct insights to detailed physics. Theories are established by analyzing the characteristics of shape changing and flow evolution.

Liposuction in Lymphedema Treatment.

PubMed

Brorson, Håkan

2016-01-01

Lymphedema leads to early deposition of adipose tissue. This may explain why conservative therapies such as complex decongestive therapy (CDT) and controlled compression therapy (CCT), as well as various forms of microsurgical reconstructions, cannot completely remove the excess volume in patients with a large chronic nonpitting lymphedema. Liposuction is therefore a logical and tempting treatment to reduce the adipose tissue volume excess. This article outlines the benefits of using liposuction and presents evidence to support its use. The mechanism between adipose tissue depositions is described as well as the surgical technique, postoperative care, volume measurements, effects on the lymph transport, and follow-up. Fifteen years' follow-up shows complete reduction of the excess volume without recurrence following liposuction in patients with postmastectomy arm lymphedema. The same promising results can also be seen in patients with leg lymphedema. Various types of treatment of lymphedema are under discussion and there has been some controversy regarding liposuction for lymphedema. Improvements in techniques, patient preparation, and patient follow-up have led to a greater and wider acceptance of liposuction as a treatment for lymphedema in patients with large chronic nonpitting extremity lymphedemas. Thieme Medical Publishers 333 Seventh Avenue, New York, NY 10001, USA.

About Small Streams and Shiny Rocks: Macromolecular Crystal Growth in Microfluidics

NASA Technical Reports Server (NTRS)

vanderWoerd, Mark; Ferree, Darren; Spearing, Scott; Monaco, Lisa; Molho, Josh; Spaid, Michael; Brasseur, Mike; Curreri, Peter A. (Technical Monitor)

2002-01-01

We are developing a novel technique with which we have grown diffraction quality protein crystals in very small volumes, utilizing chip-based, microfluidic ("LabChip") technology. With this technology volumes smaller than achievable with any laboratory pipette can be dispensed with high accuracy. We have performed a feasibility study in which we crystallized several proteins with the aid of a LabChip device. The protein crystals are of excellent quality as shown by X-ray diffraction. The advantages of this new technology include improved accuracy of dispensing for small volumes, complete mixing of solution constituents without bubble formation, highly repeatable recipe and growth condition replication, and easy automation of the method. We have designed a first LabChip device specifically for protein crystallization in batch mode and can reliably dispense and mix from a range of solution constituents. We are currently testing this design. Upon completion additional crystallization techniques, such as vapor diffusion and liquid-liquid diffusion will be accommodated. Macromolecular crystallization using microfluidic technology is envisioned as a fully automated system, which will use the 'tele-science' concept of remote operation and will be developed into a research facility aboard the International Space Station.

[Evolution of the audio-visual technologies of production and diffusion and the conditions of their application in the Third World].

PubMed

Lefebvre, M

1979-01-01

The present information production techniques are so inefficient that it is out of the question to generalize them. On the other hand audio-visual communication raises a major political problem, especially for developing countries. Audio-visual equipment has gone through adjustment phases; the example of the tape and cassette recorder is given: 2 technological improvements have completely modified its use; the transistors have allowed considerable reduction in volume and weight as well as the energy necessary; the invention of the cassette has simplified its use. Technological research is following 3 major directions: the production of equipment which consumes little energy; the improvement of electronic component production techniques (towards cheaper electronic components); finally, the designing of systems allowing to stock large quantities of information. The communication systems will probably make so much progress in the areas of technology and programming, that they will soon have very different uses than the present ones. The question is whether our civilizations will let themselves be dominated by these new systems, or whether they will succeed to turn them into progress tools.

Progress in fast, accurate multi-scale climate simulations

DOE PAGES

Collins, W. D.; Johansen, H.; Evans, K. J.; ...

2015-06-01

We present a survey of physical and computational techniques that have the potential to contribute to the next generation of high-fidelity, multi-scale climate simulations. Examples of the climate science problems that can be investigated with more depth with these computational improvements include the capture of remote forcings of localized hydrological extreme events, an accurate representation of cloud features over a range of spatial and temporal scales, and parallel, large ensembles of simulations to more effectively explore model sensitivities and uncertainties. Numerical techniques, such as adaptive mesh refinement, implicit time integration, and separate treatment of fast physical time scales are enablingmore » improved accuracy and fidelity in simulation of dynamics and allowing more complete representations of climate features at the global scale. At the same time, partnerships with computer science teams have focused on taking advantage of evolving computer architectures such as many-core processors and GPUs. As a result, approaches which were previously considered prohibitively costly have become both more efficient and scalable. In combination, progress in these three critical areas is poised to transform climate modeling in the coming decades.« less

A Large number of fast cosmological simulations

NASA Astrophysics Data System (ADS)

Koda, Jun; Kazin, E.; Blake, C.

2014-01-01

Mock galaxy catalogs are essential tools to analyze large-scale structure data. Many independent realizations of mock catalogs are necessary to evaluate the uncertainties in the measurements. We perform 3600 cosmological simulations for the WiggleZ Dark Energy Survey to obtain the new improved Baron Acoustic Oscillation (BAO) cosmic distance measurements using the density field "reconstruction" technique. We use 1296^3 particles in a periodic box of 600/h Mpc on a side, which is the minimum requirement from the survey volume and observed galaxies. In order to perform such large number of simulations, we developed a parallel code using the COmoving Lagrangian Acceleration (COLA) method, which can simulate cosmological large-scale structure reasonably well with only 10 time steps. Our simulation is more than 100 times faster than conventional N-body simulations; one COLA simulation takes only 15 minutes with 216 computing cores. We have completed the 3600 simulations with a reasonable computation time of 200k core hours. We also present the results of the revised WiggleZ BAO distance measurement, which are significantly improved by the reconstruction technique.

Bilateral chronic sacral neuromodulation for treatment of lower urinary tract dysfunction.

PubMed

Hohenfellner, M; Schultz-Lampel, D; Dahms, S; Matzel, K; Thüroff, J W

1998-09-01

Chronic sacral neuromodulation aims at functional restoration of selected forms of nonneurogenic and neurogenic bladder dysfunction. The original technique, as described by Tanagho and Schmidt, provides unilateral sacral nerve stimulation via an implanted stimulator powering an electrode inserted into a sacral foramen. Its drawback was that the implant failed unpredictably in some patients despite previous successful percutaneous test stimulation. Therefore, we modified the stimulation technique to improve the efficacy of chronic sacral neuromodulation. Guarded bipolar electrodes powered by an implantable neurostimulator were attached bilaterally directly to the S3 nerves through a sacral laminectomy in 9 women and 2 men (mean age 43.4 years). Of the patients 5 had urinary incontinence due to detrusor hyperactivity and 6 had urinary retention from detrusor hypocontractility. Mean followup with repeated urodynamics was 13 months (range 9 to 28). Four significant complications were encountered in 4 patients. In 10 patients the urological sequelae of the neurological disorder were alleviated significantly (50% or more), including 5 who experienced complete relief of symptoms. The efficacy of chronic sacral neuromodulation can be improved by bilateral attachment of electrodes directly to the sacral nerves.

Demonstration of transoral robotic supraglottic laryngectomy and total laryngectomy in cadaveric specimens using the Medrobotics Flex System.

PubMed

Funk, Emily; Goldenberg, David; Goyal, Neerav

2017-06-01

Current management of laryngeal malignancies is associated with significant morbidity. Application of minimally invasive transoral techniques may reduce the morbidity associated with traditional procedures. The purpose of this study was to present our investigation of the utility of a novel flexible robotic system for transoral supraglottic laryngectomy and total laryngectomy. Transoral total laryngectomy and transoral supraglottic laryngectomy were performed in cadaveric specimens using the Flex Robotic System (Medrobotics, Raynham, MA). All procedures were completed successfully in the cadaveric models. The articulated endoscope allowed for access to the desired surgical site. Flexible instruments enabled an atraumatic approach and allowed for precise surgical technique. Access to deep anatomic structures remains problematic using current minimally invasive robotic approaches. Improvements in visualization and access to the laryngopharyngeal complex offered by this system may improve surgical applications to the larynx. This study demonstrates the technical feasibility using the Flex Robotic System for transoral robotic supraglottic laryngectomy and total laryngectomy. © 2017 Wiley Periodicals, Inc. Head Neck 39: 1218-1225, 2017. © 2017 Wiley Periodicals, Inc.

Segment-based acoustic models for continuous speech recognition

NASA Astrophysics Data System (ADS)

Ostendorf, Mari; Rohlicek, J. R.

1993-07-01

This research aims to develop new and more accurate stochastic models for speaker-independent continuous speech recognition, by extending previous work in segment-based modeling and by introducing a new hierarchical approach to representing intra-utterance statistical dependencies. These techniques, which are more costly than traditional approaches because of the large search space associated with higher order models, are made feasible through rescoring a set of HMM-generated N-best sentence hypotheses. We expect these different modeling techniques to result in improved recognition performance over that achieved by current systems, which handle only frame-based observations and assume that these observations are independent given an underlying state sequence. In the fourth quarter of the project, we have completed the following: (1) ported our recognition system to the Wall Street Journal task, a standard task in the ARPA community; (2) developed an initial dependency-tree model of intra-utterance observation correlation; and (3) implemented baseline language model estimation software. Our initial results on the Wall Street Journal task are quite good and represent significantly improved performance over most HMM systems reporting on the Nov. 1992 5k vocabulary test set.

Progress in Rectal Cancer Treatment

PubMed Central

Ceelen, Wim P.

2012-01-01

The dramatic improvement in local control of rectal cancer observed during the last decades is to be attributed to attention to surgical technique and to the introduction of neoadjuvant therapy regimens. Nevertheless, systemic relapse remains frequent and is currently insufficiently addressed. Intensification of neoadjuvant therapy by incorporating chemotherapy with or without targeted agents before the start of (chemo)radiation or during the waiting period to surgery may present an opportunity to improve overall survival. An increasing number of patients can nowadays undergo sphincter preserving surgery. In selected patients, local excision or even a “wait and see” approach may be feasible following active neoadjuvant therapy. Molecular and genetic biomarkers as well as innovative imaging techniques may in the future allow better selection of patients for this treatment option. Controversy persists concerning the selection of patients for adjuvant chemotherapy and/or targeted therapy after neoadjuvant regimens. The currently available evidence suggests that in complete pathological responders long-term outcome is excellent and adjuvant therapy may be omitted. The results of ongoing trials will help to establish the ideal tailored approach in resectable rectal cancer. PMID:22970381

Improved US visualization of the pancreatic tail with simethicone, water, and patient rotation.

PubMed

Abu-Yousef, M M; El-Zein, Y

2000-12-01

To evaluate the effect of degassed water, simethicone, and patient rotation on ultrasonographic (US) visualization of the pancreatic tail. Seventy patients in whom visualization of the pancreatic tail was poor at US were reevaluated in the upright position after ingesting 2 cups (500 mL) of water with 80 mg of simethicone followed by rotating three times on the examination table. In a few patients, the right posterior oblique position was used. Pancreatic tail visualization and disbursement of gastric gas were evaluated. Seventy patients who received 500 mL of distilled water only served as control subjects. Pancreatic tail visualization in patients versus control subjects was complete in 55 (79%) versus five (7%) of 70 patients and control subjects, partial in 10 (14%) versus 38 (54%), and not improved in five (7%) versus 27 (39%). The effect on diminishing gastric air was closely correlated with the degree of improved visualization in most patients. All patients tolerated the procedure well, with no side effects. The technique added a mean of 8 versus 5 minutes to the examination in patients versus control subjects. The full acoustic window effect of the simethicone-water mixture lasted approximately 10 minutes. The simethicone-water-rotation technique is simple, safe, inexpensive, and effective for improving pancreatic tail visualization in ambulatory patients and is superior to the use of water alone.

Evaluation of a problem-solving (PS) techniques-based intervention for informal carers of patients with dementia receiving in-home care.

PubMed

Chiu, Mary; Pauley, Tim; Wesson, Virginia; Pushpakumar, Dunstan; Sadavoy, Joel

2015-06-01

The value of care provided by informal carers in Canada is estimated at $26 billion annually (Hollander et al., 2009). However, carers' needs are often overlooked, limiting their capacity to provide care. Problem-solving therapy (PST), a structured approach to problem solving (PS) and a core principle of the Reitman Centre CARERS Program, has been shown to alleviate emotional distress and improve carers' competence (Chiu et al., 2013). This study evaluated the effectiveness of problem-solving techniques-based intervention based on adapted PST methods, in enhancing carers' physical and emotional capacity to care for relatives with dementia living in the community. 56 carers were equally allocated to a problem-solving techniques-based intervention group or a control arm. Carers in the intervention group received three 1 hr visits by a care coordinator (CC) who had been given advanced training in PS techniques-based intervention. Coping, mastery, competence, burden, and perceived stress of the carers were evaluated at baseline and post-intervention using standardized assessment tools. An intention-to-treat analysis utilizing repeated measures ANOVA was performed on the data. Post-intervention measures completion rate was 82% and 92% for the intervention and control groups, respectively. Carers in the intervention group showed significantly improved task-oriented coping, mastery, and competence and significantly reduced emotion-oriented coping, burden and stress (p < 0.01-0.001). Control carers showed no change. PS techniques, when learned and delivered by CCs as a tool to coach carers in their day-to-day caregiving, improves carers' caregiving competence, coping, burden, and perceived stress. This may reduce dependence on primary, psychiatric, and institutional care. Results provide evidence that establishing effective partnerships between inter-professional clinicians in academic clinical health science centers, and community agencies can extend the reach of the expertise of specialized health care institutions.

A Brief History of the use of Electromagnetic Induction Techniques in Soil Survey

NASA Astrophysics Data System (ADS)

Brevik, Eric C.; Doolittle, James

2017-04-01

Electromagnetic induction (EMI) has been used to characterize the spatial variability of soil properties since the late 1970s. Initially used to assess soil salinity, the use of EMI in soil studies has expanded to include: mapping soil types; characterizing soil water content and flow patterns; assessing variations in soil texture, compaction, organic matter content, and pH; and determining the depth to subsurface horizons, stratigraphic layers or bedrock, among other uses. In all cases the soil property being investigated must influence soil apparent electrical conductivity (ECa) either directly or indirectly for EMI techniques to be effective. An increasing number and diversity of EMI sensors have been developed in response to users' needs and the availability of allied technologies, which have greatly improved the functionality of these tools and increased the amount and types of data that can be gathered with a single pass. EMI investigations provide several benefits for soil studies. The large amount of georeferenced data that can be rapidly and inexpensively collected with EMI provides more complete characterization of the spatial variations in soil properties than traditional sampling techniques. In addition, compared to traditional soil survey methods, EMI can more effectively characterize diffuse soil boundaries and identify included areas of dissimilar soils within mapped soil units, giving soil scientists greater confidence when collecting spatial soil information. EMI techniques do have limitations; results are site-specific and can vary depending on the complex interactions among multiple and variable soil properties. Despite this, EMI techniques are increasingly being used to investigate the spatial variability of soil properties at field and landscape scales. The future should witness a greater use of multiple-frequency and multiple-coil EMI sensors and integration with other sensors to assess the spatial variability of soil properties. Data analysis will be improved with advanced processing and presentation systems and more sophisticated geostatistical modeling algorithms will be developed and used to interpolate EMI data, improve the resolution of subsurface features, and assess soil properties.

Does double-row rotator cuff repair improve functional outcome of patients compared with single-row technique? A systematic review.

PubMed

DeHaan, Alexander M; Axelrad, Thomas W; Kaye, Elizabeth; Silvestri, Lorenzo; Puskas, Brian; Foster, Timothy E

2012-05-01

The advantage of single-row versus double-row arthroscopic rotator cuff repair techniques has been a controversial issue in sports medicine and shoulder surgery. There is biomechanical evidence that double-row techniques are superior to single-row techniques; however, there is no clinical evidence that the double-row technique provides an improved functional outcome. When compared with single-row rotator cuff repair, double-row fixation, although biomechanically superior, has no clinical benefit with respect to retear rate or improved functional outcome. Systematic review. The authors reviewed prospective studies of level I or II clinical evidence that compared the efficacy of single- and double-row rotator cuff repairs. Functional outcome scores included the American Shoulder and Elbow Surgeons (ASES) shoulder scale, the Constant shoulder score, and the University of California, Los Angeles (UCLA) shoulder rating scale. Radiographic failures and complications were also analyzed. A test of heterogeneity for patient demographics was also performed to determine if there were differences in the patient profiles across the included studies. Seven studies fulfilled our inclusion criteria. The test of heterogeneity across these studies showed no differences. The functional ASES, Constant, and UCLA outcome scores revealed no difference between single- and double-row rotator cuff repairs. The total retear rate, which included both complete and partial retears, was 43.1% for the single-row repair and 27.2% for the double-row repair (P = .057), representing a trend toward higher failures in the single-row group. Through a comprehensive literature search and meta-analysis of current arthroscopic rotator cuff repairs, we found that the single-row repairs did not differ from the double-row repairs in functional outcome scores. The double-row repairs revealed a trend toward a lower radiographic proven retear rate, although the data did not reach statistical significance. There may be a concerning trend toward higher retear rates in patients undergoing a single-row repair, but further studies are required.

Dynamic Article: Tandem Robotic Technique of Extralevator Abdominoperineal Excision and Rectus Abdominis Muscle Harvest for Immediate Closure of the Pelvic Floor Defect.

PubMed

Singh, Puneet; Teng, Edward; Cannon, Lisa M; Bello, Brian L; Song, David H; Umanskiy, Konstantin

2015-09-01

Extralevator abdominoperineal excision for distal rectal cancers involves cylindrical excision of the mesorectum with wide division of the levator ani muscles. Although this technique has been shown to decrease local cancer recurrence and improve survival, it leaves the patient with a considerable pelvic floor defect that may require reconstruction. We developed an innovative technique of robotic extralevator abdominoperineal excision combined with robotic harvest of the rectus abdominis muscle flap for immediate reconstruction of the pelvic floor defect. This was a retrospective review pilot study. This study was conducted at a tertiary care cancer center. Three patients who underwent robotic extralevator abdominoperineal excision with robotic rectus abdominis flap harvest for distal rectal adenocarcinoma were included. Intraoperative and postoperative outcomes included operative time, intraoperative complications, length of hospital stay, wound complications, incidence of perineal hernia, persistent pain, and functional limitations. Three patients underwent this procedure. The median operative time was 522 minutes with median hospital stay of 6 days. One patient experienced perineal wound complication requiring limited incision and drainage followed by complete healing of the wound by secondary intention. The other 2 patients did not experience any wound complications. Longest follow-up was 16 months. None of the patients developed perineal hernias during this time period. The small sample size and retrospective nature were limitations. This technique confers multiple advantages including improved visualization and dexterity within the pelvis and accurate wide margins at the pelvic floor. An incisionless robotic flap harvest with preservation of the anterior rectus sheath obviates the risk of ventral hernia while providing robust tissue closure of the radiated abdominoperineal excision wound. This technique may result in faster postoperative recovery, decreased morbidity, improved functional outcomes and cosmesis. Further studies are needed to prospectively analyze this approach (Supplemental Digital Content 1, video abstract, http://links.lww.com/DCR/A188).

Enhancing Self-Efficacy and Performance: An Experimental Comparison of Psychological Techniques.

PubMed

Wright, Bradley James; O'Halloran, Paul Daniel; Stukas, Arthur Anthony

2016-01-01

We assessed how 6 psychological performance enhancement techniques (PETs) differentially improved self-efficacy (SE) and skill performance. We also assessed whether vicarious experiences and verbal persuasion as posited sources of SE (Bandura, 1982 ) were supported and, further, if the effects of the 6 PETs remained after controlling for achievement motivation traits and self-esteem. A within-subject design assessed each individual across 2 trials for 3 disparate PETs. A between-groups design assessed differences between PETs paired against each other for 3 similar novel tasks. Participants (N = 96) performed 2 trials of 10 attempts at each of the tasks (kick, throw, golf putt) in a counterbalanced sequence using their nondominant limb. Participants completed the Sport Orientation Questionnaire, Rosenberg Self-Esteem Scale, and General Self-Efficacy Scale and were randomly allocated to either the modeling or imagery, goal-setting or instructional self-statement, or knowledge-of-results or motivational feedback conditions aligned with each task. An instructional self-statement improved performance better than imagery, modeling, goal setting, and motivational and knowledge-of-results augmented feedback. Motivational auditory feedback most improved SE. Increased SE change scores were related to increased performance difference scores on all tasks after controlling for age, sex, achievement motivation, and self-esteem. Some sources of SE may be more influential than others on both SE and performance improvements. We provide partial support for the sources of SE proposed by Bandura's social-cognitive theory with verbal persuasion but not vicarious experiences improving SE.

Preoperative surgical rehearsal using cadaveric fresh tissue surgical simulation increases resident operative confidence.

PubMed

Weber, Erin L; Leland, Hyuma A; Azadgoli, Beina; Minneti, Michael; Carey, Joseph N

2017-08-01

Rehearsal is an essential part of mastering any technical skill. The efficacy of surgical rehearsal is currently limited by low fidelity simulation models. Fresh cadaver models, however, offer maximal surgical simulation. We hypothesize that preoperative surgical rehearsal using fresh tissue surgical simulation will improve resident confidence and serve as an important adjunct to current training methods. Preoperative rehearsal of surgical procedures was performed by plastic surgery residents using fresh cadavers in a simulated operative environment. Rehearsal was designed to mimic the clinical operation, complete with a surgical technician to assist. A retrospective, web-based survey was used to assess resident perception of pre- and post-procedure confidence, preparation, technique, speed, safety, and anatomical knowledge on a 5-point scale (1= not confident, 5= very confident). Twenty-six rehearsals were performed by 9 residents (PGY 1-7) an average of 4.7±2.1 days prior to performance of the scheduled operation. Surveys demonstrated a median pre-simulation confidence score of 2 and a post-rehearsal score of 4 (P<0.01). The perceived improvement in confidence and performance was greatest when simulation was performed within 3 days of the scheduled case. All residents felt that cadaveric simulation was better than standard preparation methods of self-directed reading or discussion with other surgeons. All residents believed that their technique, speed, safety, and anatomical knowledge improved as a result of simulation. Fresh tissue-based preoperative surgical rehearsal was effectively implemented in the residency program. Resident confidence and perception of technique improved. Survey results suggest that cadaveric simulation is beneficial for all levels of residents. We believe that implementation of preoperative surgical rehearsal is an effective adjunct to surgical training at all skill levels in the current environment of decreased work hours.

Medication education program for Indian children with asthma: A feasibility stud.

PubMed

Grover, C; Goel, N; Armour, C; Van Asperen, P P; Gaur, S N; Moles, R J; Saini, B

2016-01-01

It is postulated that children with asthma who receive an interactive, comprehensive, culturally relevant education program would improve their asthma knowledge (AK), asthma control, and adherence compared with children receiving usual care. The aim of this study was to develop, implement, and evaluate the efficacy of a culturally relevant asthma education intervention for children with asthma and their parents in India. Children with asthma (7-12 years) and their parents were recruited from an outpatient clinic in a Chest Diseases Hospital in New Delhi, and were randomly assigned to either an intervention or usual care group. At baseline, outcome data collected included pediatric asthma caregiver quality of life (PACQL, primary outcome), AK, asthma control, adherence, inhaler technique, action plan ownership, and goal achievement. These data were collected again at 1 and 6 months after baseline. Outcomes were compared within and between groups using ANOVA techniques. Forty parent-child pairs were recruited. Of these, 24 pairs of children with asthma and their parents received the educational intervention. The PACQL significantly improved from baseline to 6 months in the intervention (5.87 ± 0.94-7.00 ± 0.03) versus the usual care group (5.90 ± 0.52-6.34 ± 0.56) (P < 0.001). Other outcomes such as the parents' and child's AK, child's asthma control and inhaler technique were significantly improved in the intervention group across the study. All the participants possessed a written asthma action plan at the end of the intervention. Eighty-five goals were set by children with asthma across all the visits and were achieved by completion. An asthma educator delivered interactive program simultaneously involving children with asthma and their parents, improved quality of life, empowered and promoted better self-management skills.

Low friction and high strength of 316L stainless steel tubing for biomedical applications.

PubMed

Amanov, Auezhan; Lee, Soo-Wohn; Pyun, Young-Sik

2017-02-01

We propose herein a nondestructive surface modification technique called ultrasonic nanocrystalline surface modification (UNSM) to increase the strength and to improve the tribological performance of 316L stainless steel (SS) tubing. Nanocrystallization along nearly the complete tube thickness of 200μm was achieved by UNSM technique that was confirmed by electron backscatter diffraction (EBSD). Nano-hardness of the untreated and UNSM-treated specimens was measured using a nanoindentation. Results revealed that a substantial increase in hardness was obtained for the UNSM-treated specimen that may be attributed to the nanocrystallization and refined grains. Stress-strain behavior of the untreated and UNSM-treated specimens was assessed by a 3-point bending test. It was found that the UNSM-treated specimen exhibited a much higher strength than that of the untreated specimen. In addition, the tribological behavior of the untreated and UNSM-treated specimens with an outer diameter (OD) of 1.6mm and an inner diameter (ID) of 1.2mm was investigated using a cylinder-on-cylinder (crossed tubes of equal radius) tribo-tester against itself under dry conditions at ambient temperature. The friction coefficient and wear resistance of the UNSM-treated specimen were remarkably improved compared to that of the untreated specimen. The significant increase in hardness after UNSM treatment is responsible for the improved friction coefficient and wear resistance of the tubing. Thus, the UNSM technique was found to be beneficial to improving the mechanical and tribological properties of 316L SS tubing for various potential biomedical applications, in particular for coronary artery stents. Copyright © 2016 Elsevier B.V. All rights reserved.

Miniature surgical robot for laparoendoscopic single-incision colectomy.

PubMed

Wortman, Tyler D; Meyer, Avishai; Dolghi, Oleg; Lehman, Amy C; McCormick, Ryan L; Farritor, Shane M; Oleynikov, Dmitry

2012-03-01

This study aimed to demonstrate the effectiveness of using a multifunctional miniature in vivo robotic platform to perform a single-incision colectomy. Standard laparoscopic techniques require multiple ports. A miniature robotic platform to be inserted completely into the peritoneal cavity through a single incision has been designed and built. The robot can be quickly repositioned, thus enabling multiquadrant access to the abdominal cavity. The miniature in vivo robotic platform used in this study consists of a multifunctional robot and a remote surgeon interface. The robot is composed of two arms with shoulder and elbow joints. Each forearm is equipped with specialized interchangeable end effectors (i.e., graspers and monopolar electrocautery). Five robotic colectomies were performed in a porcine model. For each procedure, the robot was completely inserted into the peritoneal cavity, and the surgeon manipulated the user interface to control the robot to perform the colectomy. The robot mobilized the colon from its lateral retroperitoneal attachments and assisted in the placement of a standard stapler to transect the sigmoid colon. This objective was completed for all five colectomies without any complications. The adoption of both laparoscopic and single-incision colectomies currently is constrained by the inadequacies of existing instruments. The described multifunctional robot provides a platform that overcomes existing limitations by operating completely within one incision in the peritoneal cavity and by improving visualization and dexterity. By repositioning the small robot to the area of the colon to be mobilized, the ability of the surgeon to perform complex surgical tasks is improved. Furthermore, the success of the robot in performing a completely in vivo colectomy suggests the feasibility of using this robotic platform to perform other complex surgeries through a single incision.

Optimum data weighting and error calibration for estimation of gravitational parameters

NASA Technical Reports Server (NTRS)

Lerch, Francis J.

1989-01-01

A new technique was developed for the weighting of data from satellite tracking systems in order to obtain an optimum least-squares solution and an error calibration for the solution parameters. Data sets from optical, electronic, and laser systems on 17 satellites in GEM-T1 Goddard Earth Model-T1 (GEM-T1) were employed toward application of this technique for gravity field parameters. Also GEM-T2 (31 satellites) was recently computed as a direct application of the method and is summarized. The method employs subset solutions of the data associated with the complete solution to agree with their error estimates. With the adjusted weights the process provides for an automatic calibration of the error estimates for the solution parameters. The data weights derived are generally much smaller than corresponding weights obtained from nominal values of observation accuracy or residuals. Independent tests show significant improvement for solutions with optimal weighting. The technique is general and may be applied to orbit parameters, station coordinates, or other parameters than the gravity model.

Robot Guidance Using Machine Vision Techniques in Industrial Environments: A Comparative Review.

PubMed

Pérez, Luis; Rodríguez, Íñigo; Rodríguez, Nuria; Usamentiaga, Rubén; García, Daniel F

2016-03-05

In the factory of the future, most of the operations will be done by autonomous robots that need visual feedback to move around the working space avoiding obstacles, to work collaboratively with humans, to identify and locate the working parts, to complete the information provided by other sensors to improve their positioning accuracy, etc. Different vision techniques, such as photogrammetry, stereo vision, structured light, time of flight and laser triangulation, among others, are widely used for inspection and quality control processes in the industry and now for robot guidance. Choosing which type of vision system to use is highly dependent on the parts that need to be located or measured. Thus, in this paper a comparative review of different machine vision techniques for robot guidance is presented. This work analyzes accuracy, range and weight of the sensors, safety, processing time and environmental influences. Researchers and developers can take it as a background information for their future works.

Flap design for guided tissue regeneration surgery in the esthetic zone: the "whale's tail" technique.

PubMed

Bianchi, Andrea E; Bassetti, Achille

2009-04-01

The aim of this paper was to describe a new surgical technique designed to preserve interdental tissue in guided tissue regeneration. This procedure was created to specifically regenerate wide intrabony defects in the esthetic zone. Fourteen subjects with an intraosseous defect in the maxillary incisor region took part in this clinical study. The defects were treated with bioresorbable membranes in combination with a bovine bone mineral graft. At baseline and at 12 months after surgery, the following clinical parameters were measured: full-mouth plaque scores, full-mouth bleeding scores, probing pocket depths, clinical attachment levels, and gingival recession. A significant gain in clinical attachment level (4.57 +/- 0.65 mm) and a reduction in probing depths (5.14 +/- 0.95 mm) were reported 12 months after surgery. The surgical technique allowed complete flap closure in every treated site, resulting in significant improvement of the clinical parameters; thus, it appeared especially appropriate for the treatment of wide defects in the esthetic zone.

[Endonasal versus trans-canalicular endoscopic dacriocystorhinostomy using diode laser. Surgical techniques and outcomes].

PubMed

Piédrola Maroto, David; Franco Sánchez, Javier; Reyes Eldblom, Robin; Monje Vega, Elena; Conde Jiménez, Manuel; Ortiz Rueda, Manuel

2008-01-01

To evaluate the benefits and disadvantages of the endoscopic endonasal versus transcanalicular approaches using diode laser, and to compare their clinical outcomes. A total of 127 patients were operated on, 80 of them with the endonasal approach (Group I) and 47 with the transcanalicular technique (Group II). Epiphora improved completely in 67 patients in Group I (83.7 %) while the other 13 (16.2 %) continued to present the same symptoms. In Group II, a successful result was achieved in 39 patients (82.9 %) and 8 (17 %) of them had to be re-operated because of the persistence of epiphora. The surgical outcomes are similar with both laser techniques. The main advantages of using diode laser are that it does not require general anaesthesia, the lower intra- and peri-operative morbidity, the lack of nasal packing and the greater ease of performing additional interventions if it fails. The only real disadvantage of laser procedures is the high cost.

A survey of how clinicians in forensic personality disorder services engage their service users in treatment

PubMed Central

Clarke, Martin; Fardouly, Peter; McMurran, Mary

2014-01-01

Non-completion is a significant problem in treatments for personality disorder (PD), and is associated with poorer outcomes. Clinicians routinely attend to engagement issues with people diagnosed with PD and so we accessed their views about the techniques they used to facilitate treatment engagement with service users with PD. Twenty-three clinicians from a range of disciplines were asked how they defined treatment engagement, what they thought were the causes of treatment engagement problems in people with PD, and what techniques or strategies they used to enhance engagement of people with PD. Data were analysed using inductive thematic analysis. Staff working with people with PD have broad views on the factors that are implicated in treatment engagement for their client group. Consequently, the techniques they use to engage service users are wide-ranging, addressing issues to do with services, individuals, therapies and therapists. Given the limited published data thus far, the suggestions generated may be of value to other practitioners in improving service user engagement. PMID:25202229

Disease modeling in genetic kidney diseases: zebrafish.

PubMed

Schenk, Heiko; Müller-Deile, Janina; Kinast, Mark; Schiffer, Mario

2017-07-01

Growing numbers of translational genomics studies are based on the highly efficient and versatile zebrafish (Danio rerio) vertebrate model. The increasing types of zebrafish models have improved our understanding of inherited kidney diseases, since they not only display pathophysiological changes but also give us the opportunity to develop and test novel treatment options in a high-throughput manner. New paradigms in inherited kidney diseases have been developed on the basis of the distinct genome conservation of approximately 70 % between zebrafish and humans in terms of existing gene orthologs. Several options are available to determine the functional role of a specific gene or gene sets. Permanent genome editing can be induced via complete gene knockout by using the CRISPR/Cas-system, among others, or via transient modification by using various morpholino techniques. Cross-species rescues succeeding knockdown techniques are employed to determine the functional significance of a target gene or a specific mutation. This article summarizes the current techniques and discusses their perspectives.

Robot Guidance Using Machine Vision Techniques in Industrial Environments: A Comparative Review

PubMed Central

Pérez, Luis; Rodríguez, Íñigo; Rodríguez, Nuria; Usamentiaga, Rubén; García, Daniel F.

2016-01-01

In the factory of the future, most of the operations will be done by autonomous robots that need visual feedback to move around the working space avoiding obstacles, to work collaboratively with humans, to identify and locate the working parts, to complete the information provided by other sensors to improve their positioning accuracy, etc. Different vision techniques, such as photogrammetry, stereo vision, structured light, time of flight and laser triangulation, among others, are widely used for inspection and quality control processes in the industry and now for robot guidance. Choosing which type of vision system to use is highly dependent on the parts that need to be located or measured. Thus, in this paper a comparative review of different machine vision techniques for robot guidance is presented. This work analyzes accuracy, range and weight of the sensors, safety, processing time and environmental influences. Researchers and developers can take it as a background information for their future works. PMID:26959030

Heaven and Earth - `Madonne col Bambino' and `Rustiques figulines'

NASA Astrophysics Data System (ADS)

Bouquillon, A.

Analyses of the productions of della Robbia and Palissy, two masters of Renaissance ceramics in France and in Italy, have enlightened their contributions to the improvement of the glazed terracotta technique. Della Robbia used very homogeneous materials: marly clay for the bodies, and tin-opacified coloured glazes. The technique is here very robust and very mastered. Palissy used different types of clay with different colours and physical properties, associated with specific productions. So far, we have identified seven pastes. Concerning the glazes, he played with transparency and opacity, with lead glazes and with tin-opacified lead glazes. He added traditional colouring oxides as well as specific pigments (lead-tin yellow, haematite, etc.). The mixed-earth technique is specific to his palette. So, the materials used by both artists are completely different and illustrate their different philosophical approaches. To perform the different analyses, new methodologies have been developed: ICP/AES-MS, petrography and X-ray diffractometry for the bodies, PIXE and micro-PIXE, SEM coupled with EDS and Raman spectrometry for the glazes.

Charge plasma technique based dopingless accumulation mode junctionless cylindrical surrounding gate MOSFET: analog performance improvement

NASA Astrophysics Data System (ADS)

Trivedi, Nitin; Kumar, Manoj; Haldar, Subhasis; Deswal, S. S.; Gupta, Mridula; Gupta, R. S.

2017-09-01

A charge plasma technique based dopingless (DL) accumulation mode (AM) junctionless (JL) cylindrical surrounding gate (CSG) MOSFET has been proposed and extensively investigated. Proposed device has no physical junction at source to channel and channel to drain interface. The complete silicon pillar has been considered as undoped. The high free electron density or induced N+ region is designed by keeping the work function of source/drain metal contacts lower than the work function of undoped silicon. Thus, its fabrication complexity is drastically reduced by curbing the requirement of high temperature doping techniques. The electrical/analog characteristics for the proposed device has been extensively investigated using the numerical simulation and are compared with conventional junctionless cylindrical surrounding gate (JL-CSG) MOSFET with identical dimensions. For the numerical simulation purpose ATLAS-3D device simulator is used. The results show that the proposed device is more short channel immune to conventional JL-CSG MOSFET and suitable for faster switching applications due to higher I ON/ I OFF ratio.

The safety and effectiveness of pediatric chiropractic: a survey of chiropractors and parents in a practice-based research network.

PubMed

Alcantara, Joel; Ohm, Jeanne; Kunz, Derek

2009-01-01

With continued popularity of complementary and alternative medicine (CAM) therapies for children, their safety and effectiveness are of high concern for both CAM and conventional therapy providers. Chiropractic is the most popular form of practitioner-based CAM therapies for children. The objective of this study was to describe the practice of pediatric chiropractic, including its safety and effectiveness. This study used a cross-sectional survey. A practice-based research network was used for this study. Participants were chiropractors and parents of pediatric patients (aged < or =18 years) attending chiropractic visits ranging from one to 12 visits. This is a survey study. No interventions were rendered in the completion of this study. Demographics, clinical presentations, treatment-associated aggravations, complications and improvements. The indicated primary reason for chiropractic care of children was "wellness care." With respect to condition-based presentations, musculoskeletal conditions were the most common, in addition to nonmusculoskeletal conditions of childhood. The most common techniques used were diversified technique, Gonstead technique, Thompson technique, and activator methods. Treatment-associated complications were not indicated by the chiropractic and parent responders. Chiropractor responders indicated three adverse events per 5,438 office visits from the treatment of 577 children. The parent responders indicated two adverse events from 1,735 office visits involving the care of 239 children. Both sets of responders indicated a high rate of improvement with respect to the children's presenting complaints, in addition to salutary effects unrelated to the children's initial clinical presentations.

[Study of the appearance difference of lower complete denture between functional and anatomic impression techniques].

PubMed

Zhong, Qun; Wu, Xue-yin; Shen, Qing-yi; Shen, Qing-ping

2012-04-01

To compare the difference in oblique external ridge, oblique internal ridge and alveolar process crest of lower complete denture base made through functional impression and anatomic impression techniques. Fifteen patients were chosen to treat with two kinds of complete dentures through functional impression and anatomic impression technique respectively. 3D laser scanner was used to scan the three-dimensional model of the denture base and the differences of the surface structural between two techniques in alveolar process crest, external and internal oblique ridges were analyzed, using paired t test with SPSS 12.0 software package. Between the two techniques, there were significant differences in the areas of internal and external oblique ridge(P<0.01); there was no significant difference in the main support areas(P>0.05). The results explain why there is less tenderness when functional impression technique is applied. The differences measured also indicate that sufficient buffering should be made in external and internal oblique ridge areas in clinic.

A singular value decomposition linear programming (SVDLP) optimization technique for circular cone based robotic radiotherapy.

PubMed

Liang, Bin; Li, Yongbao; Wei, Ran; Guo, Bin; Xu, Xuang; Liu, Bo; Li, Jiafeng; Wu, Qiuwen; Zhou, Fugen

2018-01-05

With robot-controlled linac positioning, robotic radiotherapy systems such as CyberKnife significantly increase freedom of radiation beam placement, but also impose more challenges on treatment plan optimization. The resampling mechanism in the vendor-supplied treatment planning system (MultiPlan) cannot fully explore the increased beam direction search space. Besides, a sparse treatment plan (using fewer beams) is desired to improve treatment efficiency. This study proposes a singular value decomposition linear programming (SVDLP) optimization technique for circular collimator based robotic radiotherapy. The SVDLP approach initializes the input beams by simulating the process of covering the entire target volume with equivalent beam tapers. The requirements on dosimetry distribution are modeled as hard and soft constraints, and the sparsity of the treatment plan is achieved by compressive sensing. The proposed linear programming (LP) model optimizes beam weights by minimizing the deviation of soft constraints subject to hard constraints, with a constraint on the l 1 norm of the beam weight. A singular value decomposition (SVD) based acceleration technique was developed for the LP model. Based on the degeneracy of the influence matrix, the model is first compressed into lower dimension for optimization, and then back-projected to reconstruct the beam weight. After beam weight optimization, the number of beams is reduced by removing the beams with low weight, and optimizing the weights of the remaining beams using the same model. This beam reduction technique is further validated by a mixed integer programming (MIP) model. The SVDLP approach was tested on a lung case. The results demonstrate that the SVD acceleration technique speeds up the optimization by a factor of 4.8. Furthermore, the beam reduction achieves a similar plan quality to the globally optimal plan obtained by the MIP model, but is one to two orders of magnitude faster. Furthermore, the SVDLP approach is tested and compared with MultiPlan on three clinical cases of varying complexities. In general, the plans generated by the SVDLP achieve steeper dose gradient, better conformity and less damage to normal tissues. In conclusion, the SVDLP approach effectively improves the quality of treatment plan due to the use of the complete beam search space. This challenging optimization problem with the complete beam search space is effectively handled by the proposed SVD acceleration.

A singular value decomposition linear programming (SVDLP) optimization technique for circular cone based robotic radiotherapy

NASA Astrophysics Data System (ADS)

Liang, Bin; Li, Yongbao; Wei, Ran; Guo, Bin; Xu, Xuang; Liu, Bo; Li, Jiafeng; Wu, Qiuwen; Zhou, Fugen

2018-01-01

With robot-controlled linac positioning, robotic radiotherapy systems such as CyberKnife significantly increase freedom of radiation beam placement, but also impose more challenges on treatment plan optimization. The resampling mechanism in the vendor-supplied treatment planning system (MultiPlan) cannot fully explore the increased beam direction search space. Besides, a sparse treatment plan (using fewer beams) is desired to improve treatment efficiency. This study proposes a singular value decomposition linear programming (SVDLP) optimization technique for circular collimator based robotic radiotherapy. The SVDLP approach initializes the input beams by simulating the process of covering the entire target volume with equivalent beam tapers. The requirements on dosimetry distribution are modeled as hard and soft constraints, and the sparsity of the treatment plan is achieved by compressive sensing. The proposed linear programming (LP) model optimizes beam weights by minimizing the deviation of soft constraints subject to hard constraints, with a constraint on the l 1 norm of the beam weight. A singular value decomposition (SVD) based acceleration technique was developed for the LP model. Based on the degeneracy of the influence matrix, the model is first compressed into lower dimension for optimization, and then back-projected to reconstruct the beam weight. After beam weight optimization, the number of beams is reduced by removing the beams with low weight, and optimizing the weights of the remaining beams using the same model. This beam reduction technique is further validated by a mixed integer programming (MIP) model. The SVDLP approach was tested on a lung case. The results demonstrate that the SVD acceleration technique speeds up the optimization by a factor of 4.8. Furthermore, the beam reduction achieves a similar plan quality to the globally optimal plan obtained by the MIP model, but is one to two orders of magnitude faster. Furthermore, the SVDLP approach is tested and compared with MultiPlan on three clinical cases of varying complexities. In general, the plans generated by the SVDLP achieve steeper dose gradient, better conformity and less damage to normal tissues. In conclusion, the SVDLP approach effectively improves the quality of treatment plan due to the use of the complete beam search space. This challenging optimization problem with the complete beam search space is effectively handled by the proposed SVD acceleration.

Anterior fracture dislocation of the sacroiliac joint: A case report and literature review.

PubMed

Xiao, Jianlin; Wang, Yang; Zhang, Minglei; Jiang, Rui; Zhu, Tongtong; Liu, Guangyao; Zuo, Jianlin

2017-08-09

Publications describing the diagnosis and treatment of anterior dislocation of the sacroiliac joint are scarce. We report the case a 19-year-old female at 8 weeks' gestation who presented with anterior fracture dislocation of the right sacroiliac joint, posterior fracture dislocation of the left sacroiliac joint (crescent fracture), and incomplete abortion resulting from high energy trauma. Orthopedic surgery involved standard anterior sacroiliac joint plating using an ilioinguinal approach combined with a modified Stoppa approach. Three attempts at complete abortion failed. Complete abortion was eventually achieved by dilatation and curettage two weeks after orthopedic surgery. Our findings reveal a need to improve techniques for diagnosis and treatment of anterior fracture dislocation of the sacroiliac joint, so greater attention can be paid to the rapid and effective management of associated comorbidities, and those resulting from the initial trauma.

Embedding patient simulation in a pediatric cardiology rotation: a unique opportunity for improving resident education.

PubMed

Mohan, Shaun; Follansbee, Christopher; Nwankwo, Ugonna; Hofkosh, Dena; Sherman, Frederick S; Hamilton, Melinda F

2015-01-01

High-fidelity patient simulation (HFPS) has been used in medical education to bridge gaps in medical knowledge and clinical skills. Few studies have analyzed the impact of HFPS in subspecialty rotations for pediatric residents. We hypothesized that pediatric residents exposed to HFPS with a structured content curriculum would perform better on a case quiz than residents without exposure to HFPS. Prospective randomized controlled Tertiary-care free standing children's hospital During a cardiology rotation, senior pediatric residents completed an online pediatric cardiology curriculum and a cardiology quiz. After randomization into two groups, the study group participated in a fully debriefed HFPS session. The control group had no HFPS. Both groups completed a case quiz. Confidence surveys pre- and postsimulation were completed. From October 2010 through March 2013, 55 residents who rotated through the pediatric cardiology rotation were used in the final analysis (30 control, 25 in the study group). There was no significant difference between groups on the initial cardiology quiz. The study group scored higher on the case quiz compared with the control group (P = .024). Based on pre- and postsimulation questionnaires, residents' confidence in approaching a pediatric cardiology patient improved from an average Likert score of 5.1 to 7.5 (on scale of 0-10) (P < .001). Incorporation of HFPS into a preexisting pediatric cardiology rotation was feasible and well received. Our study suggests that simulation promotes increased confidence and may modestly improve clinical reasoning compared to traditional educational techniques. Targeted simulation sessions may readily be incorporated into pediatric subspecialty rotations. © 2014 Wiley Periodicals, Inc.

Development and characterization of a complete set of Triticum aestivum-Roegneria ciliaris disomic addition lines.

PubMed

Kong, Lingna; Song, Xinying; Xiao, Jin; Sun, Haojie; Dai, Keli; Lan, Caixia; Singh, Pawan; Yuan, Chunxia; Zhang, Shouzhong; Singh, Ravi; Wang, Haiyan; Wang, Xiue

2018-05-31

A complete set wheat-R. ciliaris disomic addition lines (DALs) were characterized and the homoeologous groups and genome affinities of R. ciliaris chromosomes were determined. Wild relatives are rich gene resources for cultivated wheat. The development of alien addition chromosome lines not only greatly broadens the genetic diversity, but also provides genetic stocks for comparative genomics studies. Roegneria ciliaris (genome S c S c Y c Y c ), a tetraploid wild relative of wheat, is tolerant or resistant to many abiotic and biotic stresses. To develop a complete set of wheat-R. ciliaris disomic addition lines (DALs), we undertook a euplasmic backcrossing program to overcome allocytoplasmic effects and preferential chromosome transmission. To improve the efficiency of identifying chromosomes from S c and Y c , we established techniques including sequential genomic in situ hybridization/fluorescence in situ hybridization (FISH) and molecular marker analysis. Fourteen DALs of wheat, each containing one pair of R. ciliaris chromosomes pairs, were characterized by FISH using four repetitive sequences [pTa794, pTa71, RcAfa and (GAA) 10 ] as probes. One hundred and sixty-two R. ciliaris-specific markers were developed. FISH and marker analysis enabled us to assign the homoeologous groups and genome affinities of R. ciliaris chromosomes. FHB resistance evaluation in successive five growth seasons showed that the amphiploid, DA2Y c , DA5Y c and DA6S c had improved FHB resistance, indicating their potential value in wheat improvement. The 14 DALs are likely new gene resources and will be phenotyped for more agronomic performances traits.

Utilization of targeted near-infrared molecular imaging to improve pulmonary metastasectomy of osteosarcomas

NASA Astrophysics Data System (ADS)

Predina, Jarrod D.; Newton, Andrew; Deshpande, Charuhas; Low, Philip; Singhal, Sunil

2018-01-01

Pulmonary metastasectomy for osteosarcoma provides a select group of patients an opportunity for long-term survival and possible cure. Unfortunately, a complete metastasectomy is challenging due an inability to accurately identify lesions that lay below the threshold of preoperative imaging or intraoperative visual and tactile inspection. Growing evidence suggests that osteosarcomas express a number of unique molecular markers, including the folate receptor alpha. In this case report, we describe the application of a folate receptor-targeted, near-infrared optical contrast agent (OTL38) to improve osteosarcoma localization during minimally invasive pulmonary resection. In addition to localizing preoperatively identified lesions, this technology helped identify additional disease that was undetected on preoperative imaging or with traditional intraoperative techniques. This report marks the first successful utilization of a molecular imaging probe useful for osteosarcomas. This technology may provide a unique approach to improve pulmonary metastasectomy of osteosarcomas.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Klesmith, Justin R.; Bacik, John -Paul; Michalczyk, Ryszard

Synthetic metabolic pathways often suffer from low specific productivity, and new methods that quickly assess pathway functionality for many thousands of variants are urgently needed. Here we present an approach that enables the rapid and parallel determination of sequence effects on flux for complete gene-encoding sequences. We show that this method can be used to determine the effects of over 8000 single point mutants of a pyrolysis oil catabolic pathway implanted in Escherichia coli. Experimental sequence-function data sets predicted whether fitness-enhancing mutations to the enzyme levoglucosan kinase resulted from enhanced catalytic efficiency or enzyme stability. A structure of one designmore » incorporating 38 mutations elucidated the structural basis of high fitness mutations. One design incorporating 15 beneficial mutations supported a 15-fold improvement in growth rate and greater than 24-fold improvement in enzyme activity relative to the starting pathway. Lastly, this technique can be extended to improve a wide variety of designed pathways.« less

Does Music Therapy Improve Anxiety and Depression in Alzheimer's Patients?

PubMed

de la Rubia Ortí, José Enrique; García-Pardo, María Pilar; Iranzo, Carmen Cabañés; Madrigal, José Joaquin Cerón; Castillo, Sandra Sancho; Rochina, Mariano Julián; Gascó, Vicente Javier Prado

2018-01-01

To evaluate the effectiveness of the implementation of a short protocol of music therapy as a tool to reduce stress and improve the emotional state in patients with mild Alzheimer's disease. A sample of 25 patients with mild Alzheimer's received therapy based on the application of a music therapy session lasting 60 min. Before and after the therapy, patient saliva was collected to quantify the level of salivary cortisol using the Enzyme-Linked ImmunoSorbent Assay (ELISA) immunoassay technique and a questionnaire was completed to measure anxiety and depression (Hospital Anxiety and Depression Scale). The results show that the application of this therapy lowers the level of stress and decreases significantly depression and anxiety, establishing a linear correlation between the variation of these variables and the variation of cortisol. A short protocol of music therapy can be an alternative medicine to improve emotional variables in Alzheimer patients.

Standard versus Rotation Technique for Insertion of Supraglottic Airway Devices: Systematic Review and Meta-Analysis

PubMed Central

Park, Jin Ha; Lee, Jong Seok; Nam, Sang Beom; Ju, Jin Wu

2016-01-01

Purpose Supraglottic airway devices have been widely utilized as an alternative to tracheal intubation in various clinical situations. The rotation technique has been proposed to improve the insertion success rate of supraglottic airways. However, the clinical efficacy of this technique remains uncertain as previous results have been inconsistent, depending on the variable evaluated. Materials and Methods We systematically searched PubMed, Embase, and the Cochrane Central Register of Controlled Trials in April 2015 for randomized controlled trials that compared the rotation and standard techniques for inserting supraglottic airways. Results Thirteen randomized controlled trials (1505 patients, 753 with the rotation technique) were included. The success rate at the first attempt was significantly higher with the rotation technique than with the standard technique [relative risk (RR): 1.13; 95% confidence interval (CI): 1.05 to 1.23; p=0.002]. The rotation technique provided significantly higher overall success rates (RR: 1.06; 95% CI: 1.04 to 1.09; p<0.001). Device insertion was completed faster with the rotation technique (mean difference: -4.6 seconds; 95% CI: -7.37 to -1.74; p=0.002). The incidence of blood staining on the removed device (RR: 0.36; 95% CI: 0.27 to 0.47; p<0.001) was significantly lower with the rotation technique. Conclusion The rotation technique provided higher first-attempt and overall success rates, faster insertion, and a lower incidence of blood on the removed device, reflecting less mucosal trauma. Thus, it may be considered as an alternative to the standard technique when predicting or encountering difficulty in inserting supraglottic airways. PMID:27189296

Current and emerging therapies for the treatment of myasthenia gravis

PubMed Central

Mantegazza, Renato; Bonanno, Silvia; Camera, Giorgia; Antozzi, Carlo

2011-01-01

Myasthenia gravis (MG) is an autoimmmune disease in which autoantibodies to different antigens of the neuromuscular junction cause the typical weakness and fatigability. Treatment includes anticholinesterase drugs, immunosuppression, immunomodulation, and thymectomy. The autoimmune response is maintained under control by corticosteroids frequently associated with immunosuppressive drugs, with improvement in the majority of patients. In case of acute exacerbations with bulbar symptoms or repeated relapses, modulation of autoantibody activity by plasmapheresis or intravenous immunoglobulins provides rapid improvement. Recently, techniques removing only circulating immunoglobulins have been developed for the chronic management of treatment-resistant patients. The rationale for thymectomy relies on the central role of the thymus. Despite the lack of controlled studies, thymectomy is recommended as an option to improve the clinical outcome or promote complete remission. New videothoracoscopic techniques have been developed to offer the maximal surgical approach with the minimal invasiveness and hence patient tolerability. The use of biological drugs such as anti-CD20 antibodies is still limited but promising. Studies performed in the animal model of MG demonstrated that several more selective or antigen-specific approaches, ranging from mucosal tolerization to inhibition of complement activity or cellular therapy, might be feasible. Investigation of the transfer of these therapeutic approaches to the human disease will be the challenge for the future. PMID:21552317

Simulation training and resident performance of singleton vaginal breech delivery.

PubMed

Deering, Shad; Brown, Jill; Hodor, Jonathon; Satin, Andrew J

2006-01-01

To determine whether simulation training improves resident competency in the management of a simulated vaginal breech delivery. Without advance notice or training, residents from 2 obstetrics and gynecology residency programs participated in a standardized simulation scenario of management of an imminent term vaginal breech delivery. The scenario used an obstetric birth simulator and human actors, with the encounters digitally recorded. Residents then received a training session with the simulator on the proper techniques for vaginal breech delivery. Two weeks later they were retested using a similar simulation scenario. A physician, blinded to training status, graded the residents' performance using a standardized evaluation sheet. Statistical analysis included the Wilcoxon signed rank test, McNemar chi2, regression analysis, and paired t test as appropriate with a P value of less than .05 considered significant. Twenty residents from 2 institutions completed all parts of the study protocol. Trained residents had significantly higher scores in 8 of 12 critical delivery components (P < .05). Overall performance of the delivery and safety in performing the delivery also improved significantly (P = .001 for both). Simulation training improved resident performance in the management of a simulated vaginal breech delivery. Performance of a term breech vaginal delivery is well suited for simulation training, because it is uncommon and inevitable, and improper technique may result in significant injury. II-2.

Improved representation of situational awareness within a dismounted small combat unit constructive simulation

NASA Astrophysics Data System (ADS)

Lee, K. David; Colony, Mike

2011-06-01

Modeling and simulation has been established as a cost-effective means of supporting the development of requirements, exploring doctrinal alternatives, assessing system performance, and performing design trade-off analysis. The Army's constructive simulation for the evaluation of equipment effectiveness in small combat unit operations is currently limited to representation of situation awareness without inclusion of the many uncertainties associated with real world combat environments. The goal of this research is to provide an ability to model situation awareness and decision process uncertainties in order to improve evaluation of the impact of battlefield equipment on ground soldier and small combat unit decision processes. Our Army Probabilistic Inference and Decision Engine (Army-PRIDE) system provides this required uncertainty modeling through the application of two critical techniques that allow Bayesian network technology to be applied to real-time applications. (Object-Oriented Bayesian Network methodology and Object-Oriented Inference technique). In this research, we implement decision process and situation awareness models for a reference scenario using Army-PRIDE and demonstrate its ability to model a variety of uncertainty elements, including: confidence of source, information completeness, and information loss. We also demonstrate that Army-PRIDE improves the realism of the current constructive simulation's decision processes through Monte Carlo simulation.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kisner, R.; Melin, A.; Burress, T.

The objective of this project is to demonstrate improved reliability and increased performance made possible by deeply embedding instrumentation and controls (I&C) in nuclear power plant (NPP) components and systems. The project is employing a highly instrumented canned rotor, magnetic bearing, fluoride salt pump as its I&C technology demonstration platform. I&C is intimately part of the basic millisecond-by-millisecond functioning of the system; treating I&C as an integral part of the system design is innovative and will allow significant improvement in capabilities and performance. As systems become more complex and greater performance is required, traditional I&C design techniques become inadequate andmore » more advanced I&C needs to be applied. New I&C techniques enable optimal and reliable performance and tolerance of noise and uncertainties in the system rather than merely monitoring quasistable performance. Traditionally, I&C has been incorporated in NPP components after the design is nearly complete; adequate performance was obtained through over-design. By incorporating I&C at the beginning of the design phase, the control system can provide superior performance and reliability and enable designs that are otherwise impossible. This report describes the progress and status of the project and provides a conceptual design overview for the platform to demonstrate the performance and reliability improvements enabled by advanced embedded I&C.« less

Wavelet processing techniques for digital mammography

NASA Astrophysics Data System (ADS)

Laine, Andrew F.; Song, Shuwu

1992-09-01

This paper introduces a novel approach for accomplishing mammographic feature analysis through multiresolution representations. We show that efficient (nonredundant) representations may be identified from digital mammography and used to enhance specific mammographic features within a continuum of scale space. The multiresolution decomposition of wavelet transforms provides a natural hierarchy in which to embed an interactive paradigm for accomplishing scale space feature analysis. Similar to traditional coarse to fine matching strategies, the radiologist may first choose to look for coarse features (e.g., dominant mass) within low frequency levels of a wavelet transform and later examine finer features (e.g., microcalcifications) at higher frequency levels. In addition, features may be extracted by applying geometric constraints within each level of the transform. Choosing wavelets (or analyzing functions) that are simultaneously localized in both space and frequency, results in a powerful methodology for image analysis. Multiresolution and orientation selectivity, known biological mechanisms in primate vision, are ingrained in wavelet representations and inspire the techniques presented in this paper. Our approach includes local analysis of complete multiscale representations. Mammograms are reconstructed from wavelet representations, enhanced by linear, exponential and constant weight functions through scale space. By improving the visualization of breast pathology we can improve the chances of early detection of breast cancers (improve quality) while requiring less time to evaluate mammograms for most patients (lower costs).

Advances and Challenges in Treatment of Locally Advanced Rectal Cancer

PubMed Central

Smith, J. Joshua; Garcia-Aguilar, Julio

2015-01-01

Dramatic improvements in the outcomes of patients with rectal cancer have occurred over the past 30 years. Advances in surgical pathology, refinements in surgical techniques and instrumentation, new imaging modalities, and the widespread use of neoadjuvant therapy have all contributed to these improvements. Several questions emerge as we learn of the benefits or lack thereof for components of the current multimodality treatment in subgroups of patients with nonmetastatic locally advanced rectal cancer (LARC). What is the optimal surgical technique for distal rectal cancers? Do all patients need postoperative chemotherapy? Do all patients need radiation? Do all patients need surgery, or is a nonoperative, organ-preserving approach warranted in selected patients? Answering these questions will lead to more precise treatment regimens, based on patient and tumor characteristics, that will improve outcomes while preserving quality of life. However, the idea of shifting the treatment paradigm (chemoradiotherapy, total mesorectal excision, and adjuvant therapy) currently applied to all patients with LARC to a more individually tailored approach is controversial. The paradigm shift toward organ preservation in highly selected patients whose tumors demonstrate clinical complete response to neoadjuvant treatment is also controversial. Herein, we highlight many of the advances and resultant controversies that are likely to dominate the research agenda for LARC in the modern era. PMID:25918296

Subintimal Recanalization of Occluded Stents: The Substent Technique

DOE Office of Scientific and Technical Information (OSTI.GOV)

Diamantopoulos, Athanasios, E-mail: adiamant@upatras.gr; Katsanos, Konstantinos; Spiliopoulos, Stavros

2013-08-01

PurposeApplication of metal stents is complicated by neointimal hyperplasia leading to vessel restenosis and reocclusion. Treatment options in cases presenting with complete occlusion of the stented segment and recurrent critical limb ischemia (CLI) are limited. We present the option of the subintimal/substent technique in dealing with occluded stents.MethodsThe study included patients presenting with recurrent CLI due to impaired blood flow as a result of complete occlusion of previously inserted metal stents and unsuccessful intraluminal crossing of the lesion via either the antegrade or retrograde approach. In these cases, crossing the occlusion through the subintimal/substent plane was attempted. Primary end pointsmore » included technical success, safety of the procedure, clinical improvement, and limb salvage, while secondary end points were patient survival, primary patency, and vessel restenosis rates at 1-year follow-up. Study end points were calculated by Kaplan-Meier survival analysis.ResultsBetween July 2006 and October 2011, a total of 14 patients (mean age 69.14 {+-} 12.59 years, 12 men) were treated with the substent technique and included in the analysis. Technical success rate was 85.71 % (12 of 14), with a total lesion length of 193.57 {+-} 90.78 mm. The mean occluded stented segment length was 90.21 {+-} 44.34 mm. In 10 (83.33 %) of 12 cases, a new stent had to be placed by the side of the old occluded one, while the remaining two cases (16.67 %) were treated only with balloon angioplasty. No serious adverse events were noted during the immediate postprocedural period. All successfully treated patients improved clinically. Estimated limb salvage was 90.9 %, and patient survival rate was 90.0 % at 1 year's follow-up. Primary patency was 45.50 % and vessel restenosis 77.30 %.ConclusionSubintimal recanalization of occluded metal stents through the substent plane is a valuable alternative treatment option, especially in patients with recurrent CLI with few alternatives.« less

Influence of education and diagnostic modes on glaucoma assessment by optometrists.

PubMed

Yoshioka, Nayuta; Wong, Elizabeth; Kalloniatis, Michael; Yapp, Michael; Hennessy, Michael P; Agar, Ashish; Healey, Paul R; Hayen, Andrew; Zangerl, Barbara

2015-11-01

To evaluate the influence of different clinical examination techniques, including optic nerve head (ONH) photography, visual field tests, and adjunct imaging on the diagnosis of glaucoma by Australian and New Zealand optometrists. The effect of a short-term, didactic teaching module on these is also explored. Clinical data of 30 patients previously seen at the Centre for Eye Health was collected and compiled into glaucoma diagnostic assessment modules. Each of six modules contained different combinations of clinical examination results and required a classification of the cases as normal, suspicious or glaucoma. A cohort of 54 Australian and New Zealand optometrists were recruited for the study and allocated into two cohorts. The intervention group completed a glaucoma training course prior to the assessment while the control group completed the assessment without additional training. Diagnostic accuracy was compared between modules and optometrist groups. High false negative rates were observed with ONH photography, which were drastically reduced with the addition of visual field, albeit at the cost of increased false positive rates. Addition of adjunct imaging techniques partially compensated for the increase in the false positive rate from the visual field, but had limited effect on false negative rate. Educational intervention resulted in larger improvement in the diagnostic ability when multiple imaging modalities were provided. The study highlighted the importance of combining both structural and functional assessments in glaucoma. Current imaging technology demonstrated limited usefulness for event diagnosis due to the persistent difficulties of defining structural and functional loss in glaucoma, thus highlighting the need for new glaucoma assessment techniques. Short-term didactic teaching programs may only result in limited improvement of glaucoma diagnostic ability in optometrists, and hence, it may need to be combined with long-term and/or non-didactic training components to obtain a greater effect. © 2015 The Authors Ophthalmic & Physiological Optics © 2015 The College of Optometrists.

Fronto-orbital feminization technique. A surgical strategy using fronto-orbital burring with or without eggshell technique to optimize the risk/benefit ratio.

PubMed

Villepelet, A; Jafari, A; Baujat, B

2018-05-04

The demand for facial feminization is increasing in transsexual patients. Masculine foreheads present extensive supraorbital bossing with a more acute glabellar angle, whereas female foreheads show softer features. The aim of this article is to describe our surgical technique for fronto-orbital feminization. The mask-lift technique is an upper face-lift. It provides rejuvenation by correcting collapsed features, and fronto-orbital feminization through burring of orbital rims and lateral canthopexies. Depending on the size of the frontal sinus and the thickness of its anterior wall, frontal remodeling is achieved using simple burring or by means of the eggshell technique. Orbital remodeling comprises a superolateral orbital opening, a reduction of ridges and a trough at the lateral orbital rim to support the lateral canthopexy. Frontal, corrugator and procerus myectomies, plus minimal scalp excision, complete the surgery. Our technique results in significant, natural-looking feminization. No complications were observed in our series of patients. The eggshell technique is an alternative to bone flap on over-pneumatized sinus. Fronto-orbital feminization fits into a wider surgical strategy. It can be associated to rhinoplasty, genioplasty, mandibular angle remodeling, face lift and laryngoplasty. Achieving facial feminization in 2 or 3 stages improves psychological and physiological tolerance. Copyright © 2018 Elsevier Masson SAS. All rights reserved.

Current topics in surgery for multiple ventricular septal defects.

PubMed

Yoshimura, Naoki; Fukahara, Kazuaki; Yamashita, Akio; Doki, Yoshinori; Takeuchi, Katsunori; Higuma, Tomonori; Senda, Kazutaka; Toge, Masayoshi; Matsuo, Tatsuro; Nagura, Saori; Aoki, Masaya; Sakata, Kimimasa; Sakai, Mari

2016-04-01

In this review article, we describe several topics, including the sandwich technique, the transatrial re-endocardialization technique, the limited apical left ventriculotomy approach and device closure. The sandwich technique was introduced for the closure of muscular ventricular septal defects (VSD) by sandwiching the septum between two felt patches placed in the left and right ventricle. This technique requires neither the transection of muscular trabeculae nor ventriculotomy. Although the sandwich technique has resulted in the improvement of surgical outcomes, cases of postoperative cardiac dysfunction have been reported. Multiple smaller VSDs have been closed with transatrial re-endocardialization. Septal dysfunction may be avoided through this technique, in which the septal trabeculae are approximated in two layers of superficial, endocardial running sutures. Recently, a number of reports have recommended a limited apical left ventriculotomy approach. With this technique, a much shorter incision of around 1 cm at the apex of the left ventricle may be sufficient for achieving the complete closure of apical muscular VSDs. The transcatheter or perventricular device closure of muscular VSDs has increasingly been performed with good results. Although favorable early and mid-term results of device closure have been reported, this method is not always safer or less invasive than surgical closure. Long-term evaluations should be performed to determine whether the right and left ventricular functions are affected by treatment with relatively large devices in the heart.

Multicenter surgical experience evaluation on the Mid-Scala electrode and insertion tools.

PubMed

Gazibegovic, Dzemal; Bero, Eva M

2017-02-01

The HiFocus Mid-Scala electrode is intended to improve hearing for individuals with severe-to-profound hearing loss by providing extended electrical coverage of the cochlea while minimizing trauma related to insertion. The electrode is appropriate for use with a wide range of surgical techniques, including either a cochleostomy or round window insertion, and the use of either a free-hand or tool-assisted approach. The objective of this survey was to evaluate how the HiFocus Mid-Scala electrode and insertion tools was used across a population of cochlear implant recipients of differing ages, audiologic profiles, and anatomical characteristics. The intent was to understand the type and frequency of surgical techniques applicable with the electrode, and to provide guidelines for clinical practice. Two questionnaires were completed by surgeons at implant centres located in the United States, Europe, and Asia. Before any surgeries were conducted, surgeons completed a questionnaire that assessed their overall cochlear implant surgical practice and preferences. Following each HiFocus Mid-Scala electrode insertion, surgeons completed a questionnaire that summarized their experience during that surgical procedure. Questionnaires were completed by 32 surgeons from 16 centres for a total of 143 surgeries (112 adults, 31 children). Most surgeons (62 %) preferred to insert the electrode via the round window or an extended round window compared with a cochleostomy (16 %), whereas the remaining 22 % indicated that they made an insertion choice based on presenting anatomy. Sixty-nine percent preferred a free-hand approach over using insertion tools. In 32 procedures, surgeons elected to deviate from an intended round window insertion to either an extended round window or cochleostomy approach.

Outcomes of Complete Versus Partial Surgical Stabilization of Flail Chest.

PubMed

Nickerson, Terry P; Thiels, Cornelius A; Kim, Brian D; Zielinski, Martin D; Jenkins, Donald H; Schiller, Henry J

2016-01-01

Rib fractures are common after chest wall trauma. For patients with flail chest, surgical stabilization is a promising technique for reducing morbidity. Anatomical difficulties often lead to an inability to completely repair the flail chest; thus, the result is partial flail chest stabilization (PFS). We hypothesized that patients with PFS have outcomes similar to those undergoing complete flail chest stabilization (CFS). A prospectively collected database of all patients who underwent rib fracture stabilization procedures from August 2009 until February 2013 was reviewed. Abstracted data included procedural and complication data, extent of stabilization, and pulmonary function test results. Of 43 patients who underwent operative stabilization of flail chest, 23 (53%) had CFS and 20 (47%) underwent PFS. Anterior location of the fracture was the most common reason for PFS (45%). Age, sex, operative time, pneumonia, intensive care unit and hospital length of stay, and narcotic use were the same in both groups. Total lung capacity was significantly improved in the CFS group at 3 months. No chest wall deformity was appreciated on follow-up, and no patients underwent additional stabilization procedures following PFS. Despite advances in surgical technique, not all fractures are amenable to repair. There was no difference in chest wall deformity, narcotic use, or clinically significant impairment in pulmonary function tests among patients who underwent PFS compared with CFS. Our data suggest that PFS is an acceptable strategy and that extending or creating additional incisions for CFS is unnecessary.

Comparison of vocal outcomes after angiolytic laser surgery and microflap surgery for vocal polyps.

PubMed

Mizuta, Masanobu; Hiwatashi, Nao; Kobayashi, Toshiki; Kaneko, Mami; Tateya, Ichiro; Hirano, Shigeru

2015-12-01

The microflap technique is a standard procedure for the treatment of vocal fold polyps. Angiolytic laser surgery carried out under topical anesthesia is an alternative method for vocal polyp removal. However, it is not clear whether angiolytic laser surgery has the same effects on vocal outcomes as the microflap technique because of a lack of studies comparing both procedures. In the current study, vocal outcomes after both procedures were compared to clarify the effects of angiolytic laser surgery for vocal polyp removal. Vocal outcomes were reviewed for patients who underwent angiolytic laser surgery (n=20, laser group) or microflap surgery (n=34, microflap group) for vocal polyp removal. The data analyzed included patient and lesion characteristics, number of surgeries required for complete resolution, and aerodynamic and acoustic examinations before and after surgery. In the laser surgery group, complete resolution of the lesion was achieved with a single procedure in 17 cases (85%) and with two procedures in 3 cases (15%). Postoperative aerodynamic and acoustic parameters demonstrated significant improvement compared to preoperative parameters in both the laser surgery group and the microflap surgery group. There were no significant differences in any postoperative aerodynamic and acoustic parameters between the two groups. The current retrospective study demonstrated that angiolytic laser surgery achieved complete resolution of vocal polyps within two procedures. Postoperative effects on aerodynamic and acoustic functions were similar to those after microflap surgery. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Peer-assisted teaching of basic surgical skills.

PubMed

Preece, Ryan; Dickinson, Emily Clare; Sherif, Mohamed; Ibrahim, Yousef; Ninan, Ann Susan; Aildasani, Laxmi; Ahmed, Sartaj; Smith, Philip

2015-01-01

Basic surgical skills training is rarely emphasised in undergraduate medical curricula. However, the provision of skills tutorials requires significant commitment from time-constrained surgical faculty. We aimed to determine how a peer-assisted suturing workshop could enhance surgical skills competency among medical students and enthuse them towards a career in surgery. Senior student tutors delivered two suturing workshops to second- and third- year medical students. Suturing performance was assessed before and after teaching in a 10-min suturing exercise (variables measured included number of sutures completed, suture tension, and inter-suture distance). Following the workshop, students completed a questionnaire assessing the effect of the workshop on their suturing technique and their intention to pursue a surgical career. Thirty-five students attended. Eighty-one percent believed their medical school course provided insufficient basic surgical skills training. The mean number of sutures completed post-teaching increased significantly (p < 0.001), and the standard deviation of mean inter-suture distance halved from ± 4.7 mm pre-teaching, to ± 2.6 mm post-teaching. All students found the teaching environment to be relaxed, and all felt the workshop helped to improve their suturing technique and confidence; 87% found the peer-taught workshop had increased their desire to undertake a career in surgery. Peer-assisted learning suturing workshops can enhance medical students' competence with surgical skills and inspire them towards a career in surgery. With very little staff faculty contribution, it is a cheap and sustainable way to ensure ongoing undergraduate surgical skills exposure.

Spatially Complete Surface Albedo Data Sets: Value-Added Products Derived from Terra MODIS Land Products

NASA Technical Reports Server (NTRS)

Moody, E. G.; King, M. D.; Platnick, S.; Schaaf, C. B.; Gao, F.

2004-01-01

Spectral land surface albedo is an important parameter for describing the radiative properties of the Earth. Accordingly it reflects the consequences of natural and human interactions, such as anthropogenic, meteorological, and phenological effects, on global and local climatological trends. Consequently, albedos are integral parts in a variety of research areas, such as general circulation models (GCMs), energy balance studies, modeling of land use and land use change, and biophysical, oceanographic, and meteorological studies. The availability of global albedo data over a large range of spectral channels and at high spatial resolution has dramatically improved with the launch of the Moderate Resolution Imaging Spectroradiometer (MODIS) instrument aboard NASA s Earth Observing System (EOS) Terra spacecraft in December 1999. However, lack of spatial and temporal coverage due to cloud and snow effects can preclude utilization of official products in production and research studies. We report on a technique used to fill incomplete MOD43 albedo data sets with the intention of providing complete value-added maps. The technique is influenced by the phenological concept that within a certain area, a pixel s ecosystem class should exhibit similar growth cycle events over the same time period. The shape of an area s phenological temporal curve can be imposed upon existing pixel-level data to fill missing temporal points. The methodology will be reviewed by showcasing 2001 global and regional results of complete albedo and NDVl data sets.

Radar studies of arctic ice and development of a real-time Arctic ice type identification system

NASA Technical Reports Server (NTRS)

Rouse, J. W., Jr.; Schell, J. A.; Permenter, J. A.

1973-01-01

Studies were conducted to develop a real-time Arctic ice type identification system. Data obtained by NASA Mission 126, conducted at Pt. Barrow, Alaska (Site 93) in April 1970 was analyzed in detail to more clearly define the major mechanisms at work affecting the radar energy illuminating a terrain cell of sea ice. General techniques for reduction of the scatterometer data to a form suitable for application of ice type decision criteria were investigated, and the electronic circuit requirements for implementation of these techniques were determined. Also, consideration of circuit requirements are extended to include the electronics necessary for analog programming of ice type decision algorithms. After completing the basic circuit designs a laboratory model was constructed and a preliminary evaluation performed. Several system modifications for improved performance are suggested. (Modified author abstract)

Program for an improved hypersonic temperature-sensing probe

NASA Technical Reports Server (NTRS)

Reilly, Richard J.

1993-01-01

Under a NASA Dryden-sponsored contract in the mid 1960s, temperatures of up to 2200 C were successfully measured using a fluid oscillator. The current program, although limited in scope, explores the problem areas which must be solved if this technique is to be extended to 10,000 R. The potential for measuring extremely high temperatures, using fluid oscillator techniques, stems from the fact that the measuring element is the fluid itself. The containing structure of the oscillator need not be brought to equilibrium temperature with with the fluid for temperature measurement, provided that a suitable calibration can be arranged. This program concentrated on review of high-temperature material developments since the original program was completed. Other areas of limited study included related pressure instrumentation requirements, dissociation, rarefied gas effects, and analysis of sensor time response.

Research on slow electron collision processes in gases. Final report, September 15, 1970--December 31, 1972

DOE Office of Scientific and Technical Information (OSTI.GOV)

Baldwin, G C

1974-04-30

Research on low energy electron collisions in gases by the time-of- flight velocity selection technique included, as a preliminary to total cross section measurements, investigations of the statistical and systematic errors inherent in the technique. In particular, thermal transpiration and instrumental fluctuation errors in manometry were investigated, and the results embodied in computer programs for data reduction. The instrumental system was improved to permit extended periods of data accumulation without manual attention. Total cross section measurements in helium, made prior to, and in molecular nitrogen, made after the supporting work was completed, are reported. The total cross sec tion ofmore » helium is found to be higher than reported in previous beam determinations. That of nitrogen is found to be structureless at low energies. (auth)« less

A search for Earth-crossing asteroids, supplement

NASA Technical Reports Server (NTRS)

Taff, L. G.; Sorvari, J. M.; Kostishack, D. F.

1984-01-01

The ground based electro-optical deep space surveillance program involves a network of computer controlled 40 inch 1m telescopes equipped with large format, low light level, television cameras of the intensified silicon diode array type which is to replace the Baker-Nunn photographic camera system for artificial satellite tracking. A prototype observatory was constructed where distant artificial satellites are discriminated from stars in real time on the basis of the satellites' proper motion. Hardware was modified and the technique was used to observe and search for minor planets. Asteroids are now routinely observed and searched. The complete observing cycle, including the 2"-3" measurement of position, requires about four minutes at present. The commonality of asteroids and artificial satellite observing, searching, data reduction, and orbital analysis is stressed. Improvements to the hardware and software as well as operational techniques are considered.

Modified overdentures for the management of oligodontia and developmental defects.

PubMed

Abadi, B J; Kimmel, N A; Falace, D A

1982-01-01

A technique for the construction of complete dentures over unaltered natural teeth has been described and illustrated for three different situations. The procedure is straightforward and simple and varies only slightly from conventional overdenture construction. The technique offers several advantages for a patient who wishes to keep the remaining natural teeth unaltered but who requires significant functional or esthetic improvement. Since the teeth are unaltered, any type of future treatment may be considered at any time without being compromised. This is an important factor to consider for the young patient. The cost, when compared to the fabrication of a fixed or cast removable prosthesis, is significantly less, while still providing acceptable esthetics and function. The versatility of this procedure allows its use in a number of situations which are not amenable to more complicated treatment methods.

Outpatient application of formalin for chronic rectal bleeding after prostate irradiation: a quasi-experimental study.

PubMed

Viani, Gustavo Arruda; Sakamoto, Aline

2017-07-01

The aim of this quasi-experimental study is to evaluate a novel technique for an outpatient application of formalin for chronic rectal bleeding after prostate irradiation. This is a quasi- experimental clinical trial developed between January 2010 and July 2015, including 35 patients with chronic radiation rectitis (CRP) due to a previous prostate radiation course. The study's eligibility was (1) completed external beam radiation therapy for prostate carcinoma >6 months previously, (2) rectal bleeding, defined as a frequency of >1× per week and/or needing of blood transfusions, and (3) diagnosis of chronic proctitis at colonoscopy. The 5% formalin application was performed by a custom applicator, which requires neither anesthesia nor sigmoidoscopy. The endpoint of the study was bleeding cessation and hemoglobin level. The onset of bleeding due to chronic rectitis was 12 months (6-36). During a median follow-up of 24 months, the rate of overall efficacy was 94%. The sustained complete response in 1 and 2 years was 80% and 73%, respectively. The Hb mean pre- and post-treatment differed significantly (12.2 vs 14.4, p = 0.0001). The rates of blood transfusion differed significantly, pre- and post-treatment (17% vs 5.7%, p = 0.031). The technique is very effective and safe, resulting to a significant improvement of hemoglobin levels and quality of life scores. Further studies are warranted to compare this technique with other treatment options for chronic radiation-induced rectal bleeding.

Endoscopic facelift of the frontal and temporal areas in multiple planes.

PubMed

Hu, Xiaogen; Ma, Haihuan; Xue, Zhiqiang; Qi, Huijie; Chen, Bo

2017-02-01

The detachment planes used in endoscopic facelifts play an important role in determining the results of facial rejuvenation. In this study, we introduced the use of multiple detachment planes for endoscopic facelifts of the frontal and temporal areas, and examined its outcome. This study included 47 patients (38 female, 9 male) who requested frontal and temporal facelifts from January 2009 to January 2014. The technique of dissection in multiple planes was used for all 47 patients. In this technique, the frontal dissection was first carried out in the subgaleal plane, before being changed to the subperiosteal plane about 2 cm above the eyebrow line. Temporal dissection was carried out in both the subcutaneous and subgaleal planes. After detachment, frontal and temporal fixations were achieved using nonabsorbable sutures, and the incisions were closed. During follow-up (ranging from 6-24 months after surgery), the patients were shown their pre- and postoperative images, and asked to rate their satisfaction with the procedure. Complications encountered were documented. All 47 patients had complete recovery without any serious complications. The patient satisfaction rate was 93.6%. Minor complications included dimpling at the suture site, asymmetry, overcorrection, transitory paralysis, late oedema, haematoma, infection, scarring and hair loss. These complications resolved spontaneously and were negligible after complete recovery. Dissection in multiple planes is valuable in frontal and temporal endoscopic facelifts. It may be worthwhile to introduce the use of this technique in frontal and temporal facelifts, as it may lead to improved outcomes. Copyright: © Singapore Medical Association

Section Work--Sleeves; Apparel Manufacturing: 9377.08.

ERIC Educational Resources Information Center

Dade County Public Schools, Miami, FL.

This course involves practice in a sleeve-making techniques. Prior to entry in this course the vocational student will have completed "Section Work--Pocket Setting." Upon completion of the course the student will be able to understand the underlying principles of sewing individual sections of garments using factory techniques comparable…

Multiple tenting techniques improve dead space obliteration in the surgical treatment for patients with giant calcified chronic subdural hematoma.

PubMed

Juan, Wei-Sheng; Tai, Shih-Huang; Hung, Yu-Chang; Lee, E-Jian

2012-04-01

Calcified chronic subdural hematoma (CCSDH), or "armored brain," is a rare disease entity. The optimal surgical procedure for CCSDH has not been established because it is hard to obtain brain re-expansion after surgery. In particular, a large CCSDH is difficult to completely extirpate, and the residual rigid inner and outer membranes facilitates dead space retention and hematoma recurrence. We introduce the use a multiple suturing technique to tent the residual outer and inner membranes onto the dura matter so as to obliterate dead space after surgical treatment for CCSDH. Neuroimaging and surgical reports with illustrative images from two cases are shown. Two patients were admitted to our intensive care unit more than 10 years apart from their ventriculoperitoneal (V-P) shunt placements. The first patient presented with clinical signs of increased intracranial pressure. The second patient had a large CCSDH as a concomitant finding with ruptured aneurysmal subarachnoid hemorrhage. Computerized cranial tomography demonstrated large hematoma cavities with thick calcified inner membranes. After neurosurgical intervention by craniotomy and optimal resection of calcified membranes and muddy blood clot, we tented the residual calcified inner and outer membranes onto the dura matter by multiple sutures to reduce dead space accumulation. Postoperatively, the two patients had improved clinical symptoms along with much reduced hematoma cavity in imaging examinations. We reported an alternative technique using multiple tenting procedures to improve dead space obliteration after surgical treatment for patients with a large CCSDH presenting as a late complication after V-P shunting.

CAD-based stand-alone spacecraft radiation exposure analysis system: An application of the early man-tended Space Station

NASA Technical Reports Server (NTRS)

Appleby, M. H.; Golightly, M. J.; Hardy, A. C.

1993-01-01

Major improvements have been completed in the approach to analyses and simulation of spacecraft radiation shielding and exposure. A computer-aided design (CAD)-based system has been developed for determining the amount of shielding provided by a spacecraft and simulating transmission of an incident radiation environment to any point within or external to the vehicle. Shielding analysis is performed using a customized ray-tracing subroutine contained within a standard engineering modeling software package. This improved shielding analysis technique has been used in several vehicle design programs such as a Mars transfer habitat, pressurized lunar rover, and the redesigned international Space Station. Results of analysis performed for the Space Station astronaut exposure assessment are provided to demonastrate the applicability and versatility of the system.

Brief mindfulness meditation improves mental state attribution and empathizing.

PubMed

Tan, Lucy B G; Lo, Barbara C Y; Macrae, C Neil

2014-01-01

The ability to infer and understand the mental states of others (i.e., Theory of Mind) is a cornerstone of human interaction. While considerable efforts have focused on explicating when, why and for whom this fundamental psychological ability can go awry, considerably less is known about factors that may enhance theory of mind. Accordingly, the current study explored the possibility that mindfulness-based meditation may improve people's mindreading skills. Following a 5-minute mindfulness induction, participants with no prior meditation experience completed tests that assessed mindreading and empathic understanding. The results revealed that brief mindfulness meditation enhanced both mental state attribution and empathic concern, compared to participants in the control group. These findings suggest that mindfulness may be a powerful technique for facilitating core aspects of social-cognitive functioning.

Combining logistic regression with classification and regression tree to predict quality of care in a home health nursing data set.

PubMed

Guo, Huey-Ming; Shyu, Yea-Ing Lotus; Chang, Her-Kun

2006-01-01

In this article, the authors provide an overview of a research method to predict quality of care in home health nursing data set. The results of this study can be visualized through classification an regression tree (CART) graphs. The analysis was more effective, and the results were more informative since the home health nursing dataset was analyzed with a combination of the logistic regression and CART, these two techniques complete each other. And the results more informative that more patients' characters were related to quality of care in home care. The results contributed to home health nurse predict patient outcome in case management. Improved prediction is needed for interventions to be appropriately targeted for improved patient outcome and quality of care.

Brief Mindfulness Meditation Improves Mental State Attribution and Empathizing

PubMed Central

Tan, Lucy B. G.; Lo, Barbara C. Y.; Macrae, C. Neil

2014-01-01

The ability to infer and understand the mental states of others (i.e., Theory of Mind) is a cornerstone of human interaction. While considerable efforts have focused on explicating when, why and for whom this fundamental psychological ability can go awry, considerably less is known about factors that may enhance theory of mind. Accordingly, the current study explored the possibility that mindfulness-based meditation may improve people’s mindreading skills. Following a 5-minute mindfulness induction, participants with no prior meditation experience completed tests that assessed mindreading and empathic understanding. The results revealed that brief mindfulness meditation enhanced both mental state attribution and empathic concern, compared to participants in the control group. These findings suggest that mindfulness may be a powerful technique for facilitating core aspects of social-cognitive functioning. PMID:25329321

Study program to improve the open-circuit voltage of low resistivity single crystal silicon solar cells

NASA Technical Reports Server (NTRS)

Minnucci, J. A.; Matthei, K. W.

1980-01-01

The results of a 14 month program to improve the open circuit voltage of low resistivity silicon solar cells are described. The approach was based on ion implantation in 0.1- to 10.0-ohm-cm float-zone silicon. As a result of the contract effort, open circuit voltages as high as 645 mV (AMO 25 C) were attained by high dose phosphorus implantation followed by furnace annealing and simultaneous SiO2 growth. One key element was to investigate the effects of bandgap narrowing caused by high doping concentrations in the junction layer. Considerable effort was applied to optimization of implant parameters, selection of furnace annealing techniques, and utilization of pulsed electron beam annealing to minimize thermal process-induced defects in the completed solar cells.

Extended frequency turbofan model

NASA Technical Reports Server (NTRS)

Mason, J. R.; Park, J. W.; Jaekel, R. F.

1980-01-01

The fan model was developed using two dimensional modeling techniques to add dynamic radial coupling between the core stream and the bypass stream of the fan. When incorporated into a complete TF-30 engine simulation, the fan model greatly improved compression system frequency response to planar inlet pressure disturbances up to 100 Hz. The improved simulation also matched engine stability limits at 15 Hz, whereas the one dimensional fan model required twice the inlet pressure amplitude to stall the simulation. With verification of the two dimensional fan model, this program formulated a high frequency F-100(3) engine simulation using row by row compression system characteristics. In addition to the F-100(3) remote splitter fan, the program modified the model fan characteristics to simulate a proximate splitter version of the F-100(3) engine.

Two-stage implant placement technique for the management of irradiated jaws: An animal study.

PubMed

Aboushelib, Moustafa N; Arnaout, Mohamed A; Elsafi, Mohamed H; Kassem, Youssef M

2017-10-01

Radiotherapy results in diminished bone remodeling capacity and an elevated risk of osteoradionecrosis, which can negatively influence the survival rate of dental implants. Patients receiving radiotherapy are advised not to receive dental implants during or soon after completing their radiotherapy. The purpose of this animal study was to investigate a 2-stage implant placement technique designed to diminish applied trauma on irradiated bone. Two groups of white New Zealand rabbits received radiotherapy in ascending doses (2, 4, 8 Gy), while a nonirradiated group served as control. Three weeks after completion of the last radiotherapy session, one of the irradiated groups and the control group received titanium dental implants bilaterally in the femur head. For the second irradiated group, an osteotomy was performed, and the surgical wound was left to heal for 2 weeks before implant placement. All animals were sacrificed 4 weeks after implant placement, and histomorphometric analysis was used to study bone-implant contact (n=14, α=.05). Statistical analysis revealed significantly higher (F=159, P<.001) bone-implant contact in the 2-stage (40.2 ±1.9) implant placement technique than in the immediately placed implants (21.2 ±2.3) in irradiated bone. Both of the groups had a significantly lower bone-to-implant contact ratio than the non-irradiated control (64.2 ±3.8). Within the limitations of this animal study, the 2-stage implant placement technique could be used to reduce trauma in irradiated bone and to improve wound healing around dental implants. Copyright © 2017 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

A novel technique: Carbon dioxide gas-assisted total peritonectomy, diaphragm and intestinal meso stripping in open surgery for advanced ovarian cancer (Çukurova technique).

PubMed

Khatib, Ghanim; Guzel, Ahmet Baris; Gulec, Umran Kucukgoz; Vardar, Mehmet Ali

2017-09-01

Most of the ovarian cancers are diagnosed at advanced stages. As peritoneal carcinomatosis increases, especially when it extends to the diaphragm and intestinal mesos, probability of obtaining complete cytoreduction is reduced. Complete cytoreduction (residue zero: R0) is one of the main factors affecting survival [1-3]. Here we present a novel technique of stripping the peritoneal surfaces as a part of cytoreductive surgery in such cases. A 55year-old woman diagnosed with peritoneal carcinomatosis was considered appropriate for primary cytoreduction after assessment of her thorax-abdominopelvic tomography, which revealed resectable intra-abdominal disease. Upon laparotomy, omental cake adherent to pelvis-filling mass, disseminated implants on the diaphragm, meso of the descending colon and small intestine were observed. The mass invaded the rectosigmoid colon, uterus, adnexa and the bladder resulting in frozen pelvis. Palpable retroperitoneal pelvic and para-aortic lymph nodes were detected. On the other side, stomach, anti-mesenteric surfaces and mesentery root of the small bowel were tumor-free. Hence, upon these perioperative and preoperative imaging findings, complete cytoreduction was thought to be achievable. Therefore, primary cytoreduction was performed. Total omentectomy, hysterectomy with bilateral salpingo-oophorectomy, rectosigmoid low anterior resection and retroperitoneal lymphadenectomy were performed. With the assistance of an injector needle connected to the insufflator tube (as in laparoscopic surgery), carbon dioxide gas was blown into the right retroperitoneal area and subsequently peritoneum was rapidly stripped up to the right diaphragm. The same procedure was then applied to the diaphragm and meso of the bowels, respectively. Owing to this technique, total stripping of all involved peritoneal surfaces was clearly facilitated and R0 goal was reached. Gas insufflation caused convenient detachment of the peritoneal surfaces along their anatomical line which led to concluding the stripping procedures easily, rapidly and safely without bleeding. Thus, according to our experience, about 10 to 15min per procedure are saved in such cases. Potential complications of CO 2 gas used here are not superior to those in transperitoneal or retroperitoneal laparoscopic procedures. During the operation, patient was followed-up for potential complications such as subcutaneous emphysema and CO 2 gas embolism.Thus, hourly blood gas was monitored. Another potential complication is injury of the vessels while inserting the needle which can be avoided by cautious inserting under the peritoneal surfaces superficially and using transillumination. In case such injuries happen, tamponing is a sufficient measure. In our serial, no perioperative complications belonging to this technique were encountered. However, long term outcomes such as precise time difference, difference in blood loss, complication rates, adhesions, morbidity associated with this technique and its impact on survival of the patients with advanced ovarian cancer have yet to be investigated. Therefore, a prospective study to validate this technique's long-term usefulness has been initiated in our clinic. We believe that this practical and effective technique will offer significant improvements in efforts to achieve complete cytoreduction. Copyright © 2017 Elsevier Inc. All rights reserved.

Implementing Delivery Room Checklists and Communication Standards in a Multi-Neonatal ICU Quality Improvement Collaborative.

PubMed

Bennett, Stacie C; Finer, Neil; Halamek, Louis P; Mickas, Nick; Bennett, Mihoko V; Nisbet, Courtney C; Sharek, Paul J

2016-08-01

The 2015 American Academy of Pediatrics Neonatal Resuscitation Program (NRP) and International Liaison Committee on Resuscitation (ILCOR) resuscitation guidelines state, "It is still suggested that briefing and debriefing techniques be used whenever possible for neonatal resuscitation." Effective communication and reliable delivery of evidence-based best practices are critical aspects of the 2015 NRP guidelines. To promote optimal communication and best practice-focused checklists use during active neonatal resuscitation, the Readiness Bundle (RB) was integrated within the larger change package deployed in the California Perinatal Quality Care Collaborative's (CPQCC) 12-month Delivery Room Management Quality Improvement Collaborative. The RB consisted of (1) a checklist for high-risk neonatal resuscitations and (2) briefings and debriefings to improve teamwork and communication in the delivery room (DR). Implementation of the RB was encouraged, compliance with the RB was tracked monthly up through 6 months after the completion of the collaborative, and satisfaction with the RB was evaluated. Twenty-four neonatal intensive care units (NICUs) participated in the CPQCCDR collaborative. Before the initiation of the collaborative, the elements of the RB were complied with in 0 of 740 reported deliveries (0%). During the 12-month collaborative, compliance with the RB improved to a median of 71%, which was surpassed in the 6-month period after the collaborative ended (80%). One-hundred percent of responding NICUs would recommend the RB to other NICUs working on improving DR management. The RB was rapidly adopted, with compliance sustained for 6 months after completion of the collaborative. Inclusion of the RB in the next generation of the NRP guidelines is encouraged.

Real-time ultrasonic weld evaluation system

NASA Astrophysics Data System (ADS)

Katragadda, Gopichand; Nair, Satish; Liu, Harry; Brown, Lawrence M.

1996-11-01

Ultrasonic testing techniques are currently used as an alternative to radiography for detecting, classifying,and sizing weld defects, and for evaluating weld quality. Typically, ultrasonic weld inspections are performed manually, which require significant operator expertise and time. Thus, in recent years, the emphasis is to develop automated methods to aid or replace operators in critical weld inspections where inspection time, reliability, and operator safety are major issues. During this period, significant advances wee made in the areas of weld defect classification and sizing. Very few of these methods, however have found their way into the market, largely due to the lack of an integrated approach enabling real-time implementation. Also, not much research effort was directed in improving weld acceptance criteria. This paper presents an integrated system utilizing state-of-the-art techniques for a complete automation of the weld inspection procedure. The modules discussed include transducer tracking, classification, sizing, and weld acceptance criteria. Transducer tracking was studied by experimentally evaluating sonic and optical position tracking techniques. Details for this evaluation are presented. Classification is obtained using a multi-layer perceptron. Results from different feature extraction schemes, including a new method based on a combination of time and frequency-domain signal representations are given. Algorithms developed to automate defect registration and sizing are discussed. A fuzzy-logic acceptance criteria for weld acceptance is presented describing how this scheme provides improved robustness compared to the traditional flow-diagram standards.

PET guidance for liver radiofrequency ablation: an evaluation

NASA Astrophysics Data System (ADS)

Lei, Peng; Dandekar, Omkar; Mahmoud, Faaiza; Widlus, David; Malloy, Patrick; Shekhar, Raj

2007-03-01

Radiofrequency ablation (RFA) is emerging as the primary mode of treatment of unresectable malignant liver tumors. With current intraoperative imaging modalities, quick, precise, and complete localization of lesions remains a challenge for liver RFA. Fusion of intraoperative CT and preoperative PET images, which relies on PET and CT registration, can produce a new image with complementary metabolic and anatomic data and thus greatly improve the targeting accuracy. Unlike neurological images, alignment of abdominal images by combined PET/CT scanner is prone to errors as a result of large nonrigid misalignment in abdominal images. Our use of a normalized mutual information-based 3D nonrigid registration technique has proven powerful for whole-body PET and CT registration. We demonstrate here that this technique is capable of acceptable abdominal PET and CT registration as well. In five clinical cases, both qualitative and quantitative validation showed that the registration is robust and accurate. Quantitative accuracy was evaluated by comparison between the result from the algorithm and clinical experts. The accuracy of registration is much less than the allowable margin in liver RFA. Study findings show the technique's potential to enable the augmentation of intraoperative CT with preoperative PET to reduce procedure time, avoid repeating procedures, provide clinicians with complementary functional/anatomic maps, avoid omitting dispersed small lesions, and improve the accuracy of tumor targeting in liver RFA.

Anxiety and Anger Symptoms in Hwabyung Patients Improved More following 4 Weeks of the Emotional Freedom Technique Program Compared to the Progressive Muscle Relaxation Program: A Randomized Controlled Trial

PubMed Central

Suh, Jin Woo; Chung, Sun Yong; Kim, Sang Young; Lee, Jung Hwan; Kim, Jong Woo

2015-01-01

Background. The Emotional Freedom Technique (EFT) is a meridian-based psychological therapy. The present clinical trial investigates the effectiveness of EFT as a new treatment option for Hwabyung (HB) patients experiencing anger and compares the efficacy to the Progressive Muscle Relaxation (PMR), the conventional meditation technique. Methods. The EFT and progressive muscle relaxation (PMR) methods were performed on 27 HB patients, and their capacities to alleviate anxiety, anger, and emotional status were compared. After a 4-week program, a survey was conducted; patients then completed a self-training program for 4 weeks, followed by a second survey. Results. During the initial 4 weeks, the EFT group experienced a significant decrease in the HB symptom scale, anger state, and paranoia ideation (p < 0.05). Over the entire 9-week interval, there were significant decreases in the HB symptom scale, anxiety state, anger state, anger trait, somatization, anxiety, hostility, and so on in EFT group (p < 0.05). Conclusion. The EFT group showed improved psychological symptoms and physical symptoms greater than those observed in the PMR group. EFT more effectively alleviated HB symptoms compared to PMR. EFT group showed better maintenance during self-training, suggesting good model of self-control treatment in HB patients. PMID:26539218

High degree-of-freedom dynamic manipulation

NASA Astrophysics Data System (ADS)

Murphy, Michael P.; Stephens, Benjamin; Abe, Yeuhi; Rizzi, Alfred A.

2012-06-01

The creation of high degree of freedom dynamic mobile manipulation techniques and behaviors will allow robots to accomplish difficult tasks in the field. We are investigating the use of the body and legs of legged robots to improve the strength, velocity, and workspace of an integrated manipulator to accomplish dynamic manipulation. This is an especially challenging task, as all of the degrees of freedom are active at all times, the dynamic forces generated are high, and the legged system must maintain robust balance throughout the duration of the tasks. To accomplish this goal, we are utilizing trajectory optimization techniques to generate feasible open-loop behaviors for our 28 dof quadruped robot (BigDog) by planning the trajectories in a 13 dimensional space. Covariance Matrix Adaptation techniques are utilized to optimize for several criteria such as payload capability and task completion speed while also obeying constraints such as torque and velocity limits, kinematic limits, and center of pressure location. These open-loop behaviors are then used to generate feed-forward terms, which are subsequently used online to improve tracking and maintain low controller gains. Some initial results on one of our existing balancing quadruped robots with an additional human-arm-like manipulator are demonstrated on robot hardware, including dynamic lifting and throwing of heavy objects 16.5kg cinder blocks, using motions that resemble a human athlete more than typical robotic motions. Increased payload capacity is accomplished through coordinated body motion.

Structured training on the da Vinci Skills Simulator leads to improvement in technical performance of robotic novices.

PubMed

Walliczek-Dworschak, U; Mandapathil, M; Förtsch, A; Teymoortash, A; Dworschak, P; Werner, J A; Güldner, C

2017-02-01

The increasing use of minimally invasive techniques such as robotic-assisted devices raises the question of how to acquire robotic surgery skills. The da Vinci Skills Simulator has been demonstrated to be an effective training tool in previous reports. To date, little data are available on how to acquire proficiency through simulator training. We investigated the outcome of a structured training programme for robotic surgical skills by robotic novices. This prospective study was conducted from January to December 2013 using the da Vinci Skills Simulator. Twenty participants, all robotic novices, were enrolled in a 4-week training curriculum. After a brief introduction to the simulator system, three consecutive repetitions of five selected exercises (Match Board 1, 2, 3 and Ring and Rail 1, 2) were performed in a defined order on days 1, 8, 15 and 22. On day 22, one repetition of a previously unpractised more advanced module (Needle Targeting) was also performed. After completion of each study day, the overall performance, time to completion, economy in motion, instrument collisions, excessive instrument force, instruments out of view, master workspace range and number of drops were analysed. Comparing the first and final repetition, overall score and time needed to complete all exercises, economy of motion and instrument collisions were significantly improved in nearly all exercises. Regarding the new exercise, a positive training effect could be demonstrated. While its overall entry score was significantly higher, the time to completion and economy of motion were significantly lower than the scores on the first repetition of the previous 5 exercises. It could be shown that training on the da Vinci Skills Simulator led to an improvement in technical performance of robotic novices. With regard to a new exercise, the training had a positive effect on the technical performance. © 2016 John Wiley & Sons Ltd.

Initial research program for the National Transonic Facility

NASA Technical Reports Server (NTRS)

Gloss, B. B.

1984-01-01

The construction and checkout of the National Transonic Facility (NTF) have been completed, and detailed calibration is now in progress. The initial NTF research program covers a wide range of study areas falling into three major elements: (1) the assessment of Reynolds number sensitivities for a broad range of configurations and flow phenomena; (2) validation of the ability of NTF to simulate full-scale aerodynamics; and (3) the development of test techniques for improved test simulations in existing wind tunnels. This paper, therefore, is a status report on these various elements of the initial NTF research program.

Effect of high latitude filtering on NWP skill

NASA Technical Reports Server (NTRS)

Kalnay, E.; Takacs, L. L.; Hoffman, R. N.

1984-01-01

The high latitude filtering techniques commonly employed in global grid point models to eliminate the high frequency waves associated with the convergence of meridians, can introduce serious distortions which ultimately affect the solution at all latitudes. Experiments completed so far with the 4 deg x 5 deg, 9-level GLAS Fourth Order Model indicate that the high latitude filter currently in operation affects only minimally its forecasting skill. In one case, however, the use of pressure gradient filter significantly improved the forecast. Three day forecasts with the pressure gradient and operational filters are compared as are 5-day forecasts with no filter.

Documentation concerning KKP development work

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dixit, S.; Thomas, I.; Rushford, M.

1994-12-22

Fabrication has been completed on a 16 level KPP on a 5-inch diameter aperture fused silica using lithographic techniques and wet etching of fused silica in a buffered hydrofluoric acid solution. The experimentally measured far-field intensity pattern displays the desired top-hat envelope and has a superimposed speckle on it. The far-field contains 90% of the incident energy inside the 640 {mu}m region. This is a significant improvement over the binary RPP`s in terms of the far-field profile control and energy concentration. Sources contributing to the energy loss are identified and efforts are underway to overcome these limitations.

Fiber optic pressure sensors in skin-friction measurements

NASA Technical Reports Server (NTRS)

Kidwell, R.

1985-01-01

Fiber optic lever pressure sensors intended for use in a low speed wind tunnel environment were designed, constructed and tested for the measurement of normal and shear displacements associated with the pressures acting on a flat aluminum plate. On-site tests performed along with several static and dynamic measurements made have established that, with proper modifications and improvements, the design concepts are acceptable and can be utilized for their intended use. Several elastomers were investigated for use in sensors and for their incorporation into these sensors. Design and assembly techniques for probes and complete sensors were developed.

[Photodynamic therapy of urinary bladder cancer using a chlorin based photosensitizer].

PubMed

Iagudaev, D M; Martov, A G; Sorokatyĭ, A E; Geĭnits, A V

2006-01-01

Photodynamic therapy (PDT) is a modem, low-invasive method of urinary bladder (UB) cancer treatment. PDT can induce complete or partial destruction of the tumor, reduce recurrence rate, provide assistance to elderly patients with compromised somatic status who are not radically operable. A combined technique improves the results of photodynamic therapy in patients with surface and invasive UB cancer of stage T2 because photodynamic impact affects not only the tumor but also all UB mucosa by light fiber with cylindric diffusor introduced in a silicon balloon with water. This leads to tumor destruction and a recurrence rate decrease.

Resolution enhancement using simultaneous couple illumination

NASA Astrophysics Data System (ADS)

Hussain, Anwar; Martínez Fuentes, José Luis

2016-10-01

A super-resolution technique based on structured illumination created by a liquid crystal on silicon spatial light modulator (LCOS-SLM) is presented. Single and simultaneous pairs of tilted beams are generated to illuminate a target object. Resolution enhancement of an optical 4f system is demonstrated by using numerical simulations. The resulting intensity images are recorded at a charged couple device (CCD) and stored in the computer memory for further processing. One dimension enhancement can be performed with only 15 images. Two dimensional complete improvement requires 153 different images. The resolution of the optical system is extended three times compared to the band limited system.

MWRRET Value-Added Product: The Retrieval of Liquid Water Path and Precipitable Water Vapor from Microwave Radiometer (MWR) Datasets

DOE Office of Scientific and Technical Information (OSTI.GOV)

KL Gaustad; DD Turner

2007-09-30

This report provides a short description of the Atmospheric Radiation Measurement (ARM) microwave radiometer (MWR) RETrievel (MWRRET) Value-Added Product (VAP) algorithm. This algorithm utilizes complimentary physical and statistical retrieval methods and applies brightness temperature offsets to reduce spurious liquid water path (LWP) bias in clear skies resulting in significantly improved precipitable water vapor (PWV) and LWP retrievals. We present a general overview of the technique, input parameters, output products, and describe data quality checks. A more complete discussion of the theory and results is given in Turner et al. (2007b).

Development of a standardized sequential extraction protocol for simultaneous extraction of multiple actinide elements

DOE PAGES

Faye, Sherry A.; Richards, Jason M.; Gallardo, Athena M.; ...

2017-02-07

Sequential extraction is a useful technique for assessing the potential to leach actinides from soils; however, current literature lacks uniformity in experimental details, making direct comparison of results impossible. This work continued development toward a standardized five-step sequential extraction protocol by analyzing extraction behaviors of 232Th, 238U, 239,240Pu and 241Am from lake and ocean sediment reference materials. Results produced a standardized procedure after creating more defined reaction conditions to improve method repeatability. A NaOH fusion procedure is recommended following sequential leaching for the complete dissolution of insoluble species.

In situ molecular elucidation of drug supersaturation achieved by nano-sizing and amorphization of poorly water-soluble drug.

PubMed

Ueda, Keisuke; Higashi, Kenjirou; Yamamoto, Keiji; Moribe, Kunikazu

2015-09-18

Quantitative evaluation of drug supersaturation and nanoparticle formation was conducted using in situ evaluation techniques, including nuclear magnetic resonance (NMR) spectroscopy. We prepared a ternary complex of carbamazepine (CBZ) with hydroxypropyl methylcellulose (HPMC) and sodium dodecyl sulfate (SDS) to improve the drug concentration. Different preparation methods, including grinding and spray drying, were performed to prepare the ternary component products, ground mixture (GM) and spray-dried sample (SD), respectively. Although CBZ was completely amorphized in the ternary SD, CBZ was partially amorphized with the remaining CBZ crystals in the ternary GM. Aqueous dispersion of the ternary GM formed nanoparticles of around 150 nm, originating from the CBZ crystals in the ternary GM. In contrast, the ternary SD formed transparent solutions without a precipitate. The molecular-level evaluation using NMR measurements revealed that approximately half a dose of CBZ in the ternary GM dispersion was present as nanoparticles; however, CBZ in the ternary SD was completely dissolved in the aqueous solution. The characteristic difference between the solid states, followed by different preparation methods, induced different solution characteristics in the ternary GM and SD. The permeation study, using a dialysis membrane, showed that the CBZ concentration dissolved in the bulk water phase rapidly reduced in the ternary SD dispersion compared to the ternary GM dispersion; this demonstrated the advantage of ternary GM dispersion in the maintenance of CBZ supersaturation. Long-term maintenance of a supersaturated state of CBZ observed in the ternary GM dispersion rather than in the ternary SD dispersion was achieved by the inhibition of CBZ crystallization owing to the existence of CBZ nanoparticles in the ternary GM dispersion. Nanoparticle formation, combined with drug amorphization, could be a promising approach to improve drug concentrations. The detailed elucidation of solution characteristics using in situ evaluation techniques will lead to the formation of useful solid dispersion and nanoparticle formulations, resulting in improved drug absorption. Copyright © 2015 Elsevier B.V. All rights reserved.

Investigation on experimental techniques to detect, locate and quantify gear noise in helicopter transmissions

NASA Technical Reports Server (NTRS)

Flanagan, P. M.; Atherton, W. J.

1985-01-01

A robotic system to automate the detection, location, and quantification of gear noise using acoustic intensity measurement techniques has been successfully developed. Major system components fabricated under this grant include an instrumentation robot arm, a robot digital control unit and system software. A commercial, desktop computer, spectrum analyzer and two microphone probe complete the equipment required for the Robotic Acoustic Intensity Measurement System (RAIMS). Large-scale acoustic studies of gear noise in helicopter transmissions cannot be performed accurately and reliably using presently available instrumentation and techniques. Operator safety is a major concern in certain gear noise studies due to the operating environment. The man-hours needed to document a noise field in situ is another shortcoming of present techniques. RAIMS was designed to reduce the labor and hazard in collecting data and to improve the accuracy and repeatability of characterizing the acoustic field by automating the measurement process. Using RAIMS a system operator can remotely control the instrumentation robot to scan surface areas and volumes generating acoustic intensity information using the two microphone technique. Acoustic intensity studies requiring hours of scan time can be performed automatically without operator assistance. During a scan sequence, the acoustic intensity probe is positioned by the robot and acoustic intensity data is collected, processed, and stored.

Rhinoplasty Complications and Reoperations: Systematic Review

PubMed Central

Crosara, Paulo Fernando Tormin Borges; Nunes, Flávio Barbosa; Rodrigues, Danilo Santana; Figueiredo, Ana Rosa Pimentel; Becker, Helena Maria Gonçalves; Becker, Celso Goncalves; Guimarães, Roberto Eustáquio Santos

2016-01-01

Introduction This article is related to complications of rhinoplasty and its main causes of reoperations. Objectives The objective of this study is to perform a systematic review of literature on complications in rhinoplasty. Data Synthesis The authors conducted a survey of articles related to key terms in the literature by using three important databases within 11 years, between January 2002 and January 2013. We found 1,271 abstracts and selected 49 articles to this review. Conclusion The main results showed that the number of primary open rhinoplasty was 7902 (89%) and 765 closed (11%) and the percentage of reoperations in primary open complete rhinoplasties was 2.73% and closed complete was 1.56%. The statistical analysis revealed a value of p = 0.071. The standardization of terms can improve the quality of scientific publications about rhinoplasty. There is no difference between primary open or closed rhinoplasty techniques in relation to reoperations. PMID:28050215

A test technique for measuring lightning-induced voltages on aircraft electrical circuits

NASA Technical Reports Server (NTRS)

Walko, L. C.

1974-01-01

The development of a test technique used for the measurement of lightning-induced voltages in the electrical circuits of a complete aircraft is described. The resultant technique utilizes a portable device known as a transient analyzer capable of generating unidirectional current impulses similar to lightning current surges, but at a lower current level. A linear relationship between the magnitude of lightning current and the magnitude of induced voltage permitted the scaling up of measured induced values to full threat levels. The test technique was found to be practical when used on a complete aircraft.

A PERT/CPM of the Computer Assisted Completion of The Ministry September Report. Research Report.

ERIC Educational Resources Information Center

Feeney, J. D.

Using two statistical analysis techniques (the Program Evaluation and Review Technique and the Critical Path Method), this study analyzed procedures for compiling the required yearly report of the Metropolitan Separate School Board (Catholic) of Toronto, Canada. The computer-assisted analysis organized the process of completing the report more…

Combining Capillary Electrophoresis with Mass Spectrometry for Applications in Proteomics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Simpson, David C.; Smith, Richard D.

2005-04-01

Throughout the field of global proteomics, ranging from simple organism studies to human medical applications, the high sample complexity creates demands for improved separations and analysis techniques. Furthermore, with increased organism complexity, the correlation between proteome and genome becomes less certain due to extensive mRNA processing prior to translation. In this way, the same DNA sequence can potentially code for regions in a number of distinct proteins; quantitative differences in expression (or abundance) between these often-related species are of significant interest. Well-established proteomics techniques, which use genomic information to identify peptides that originate from protease digestion, often cannot easily distinguishmore » between such gene products; intact protein-level analyses are required to complete the picture, particularly for identifying post-translational modifications. While chromatographic techniques are currently better suited to peptide analysis, capillary electrophoresis (CE) in combination with mass spectrometry (MS) may become important for intact protein analysis. This review focuses on CE/MS instrumentation and techniques showing promise for such applications, highlighting those with greatest potential. Reference will also be made to developments relevant to peptide-level analyses for use in time- or sample-limited situations.« less

Strategies to overcome polymerization shrinkage--materials and techniques. A review.

PubMed

Malhotra, Neeraj; Kundabala, M; Shashirashmi, Acharya

2010-03-01

Stress generation at tissue/resin composite interfaces is one of the important reasons for failure of resin-based composite (RBC) restorations owing to the inherent property of polymerization shrinkage. Unrelieved stresses can weaken the bond between the tooth structure and the restoration, eventually producing a gap at the restoration margins. This can lead to postoperative sensitivity, secondary caries, fracture of the restorations, marginal deterioration and discoloration. As polymerization shrinkage cannot be eliminated completely, various techniques and protocols have been suggested in the manipulation of, and restorative procedures for, RBCs to minimize the shrinkage and associated stresses. Introduction of various newer monomer systems (siloranes) may also overcome this problem of shrinkage stress. This review emphasizes the various material science advances and techniques advocated that are currently available or under trial/testing phase to deal with polymerization shrinkage in a clinical environment. Minimizing the shrinkage stresses in RBC restorations may lead to improvement in the success rate and survival of restorations. Thus, it is important for dental practitioners to be aware of various techniques and materials available to reduce these shrinkage stresses and be updated with the current knowledge available to deal with this issue.

Modified technique for correction of isolated radial head dislocation without apparent ulnar bowing: a retrospective case study

PubMed Central

Tan, Lei; Li, Yan-Hui; Sun, Da-Hui; Zhu, Dong; Ning, Shu-Yan

2015-01-01

Objective: There is currently no general consensus on the optimal treatment of chronic radial head dislocation. Material and Methods: Considering that the annular ligament is important in maintaining elbow stability, we developed a modified method for annular ligament reconstruction in pediatric cases of radial head dislocation without ulnar bowing. We retrospectively investigated the therapeutic outcomes of this technique in a series of cases. We used our modified technique for the treatment of five patients between January 2006 and January 2012. The average age of the patients at the time of injury was 9 years (range, 6-14 years), and the patients were followed up for 1 to 3 years. Results: The perioperative and follow-up data of the patients were examined. All five surgical procedures were completed uneventfully and had been tolerated well by the patients, with minimal complications. Remarkable improvement was noted in all the cases at the end of the follow-up period. Conclusions: Our modified technique for annular ligament reconstruction was effective in achieving good reduction of the radial head dislocation with minimal complications in pediatric cases of isolated radial head dislocation without apparent ulnar bowing. PMID:26770420

Flight test evaluation of predicted light aircraft drag, performance, and stability

NASA Technical Reports Server (NTRS)

Smetana, F. O.; Fox, S. R.

1979-01-01

A technique was developed which permits simultaneous extraction of complete lift, drag, and thrust power curves from time histories of a single aircraft maneuver such as a pullup (from V sub max to V sub stall) and pushover (to sub V max for level flight.) The technique is an extension to non-linear equations of motion of the parameter identification methods of lliff and Taylor and includes provisions for internal data compatibility improvement as well. The technique was show to be capable of correcting random errors in the most sensitive data channel and yielding highly accurate results. This technique was applied to flight data taken on the ATLIT aircraft. The drag and power values obtained from the initial least squares estimate are about 15% less than the 'true' values. If one takes into account the rather dirty wing and fuselage existing at the time of the tests, however, the predictions are reasonably accurate. The steady state lift measurements agree well with the extracted values only for small values of alpha. The predicted value of the lift at alpha = 0 is about 33% below that found in steady state tests while the predicted lift slope is 13% below the steady state value.

Treatment of Focal Articular Cartilage Defects in the Knee

PubMed Central

Magnussen, Robert A.; Dunn, Warren R.; Carey, James L.

2008-01-01

We asked whether autologous chondrocyte implantation or osteochondral autograft transfer yields better clinical outcomes compared with one another or with traditional abrasive techniques for treatment of isolated articular cartilage defects and whether lesion size influences this clinical outcome. We performed a literature search and identified five randomized, controlled trials and one prospective comparative trial evaluating these treatment techniques in 421 patients. The operative procedures included autologous chondrocyte implantation, osteochondral autograft transfer, matrix-induced autologous chondrocyte implantation, and microfracture. Minimum followup was 1 year (mean, 1.7 years; range, 1–3 years). All studies documented greater than 95% followup for clinical outcome measures. No technique consistently had superior results compared with the others. Outcomes for microfracture tended to be worse in larger lesions. All studies reported improvement in clinical outcome measures in all treatment groups when compared with preoperative assessment; however, no control (nonoperative) groups were used in any of the studies. A large prospective trial investigating these techniques with the addition of a control group would be the best way to definitively address the clinical questions. Level of Evidence: Level II, therapeutic study. See the Guidelines for Authors for a complete description of levels of evidence. PMID:18196358

Technique for Forming Solid D2 and D-T Layers for Shock Timing Experiments at the National Ignition Facility

DOE PAGES

Sater, J. D.; Espinosa-Loza, F.; Kozioziemski, B.; ...

2016-07-11

Capsule implosion experiments on the National Ignition Facility (NIF) are driven with a carefully tailored laser pulse that delivers a sequence of shocks to the ablator and fuel. In order to ensure the shocks converge at the desired position, the shock strength and velocity are measured in experimental platforms referred to as keyhole targets. We made shock measurements on capsules completely filled with liquid deuterium for the solid deuterium tritide (D-T) layer campaigns. Modeling has been used to extend these results to form an estimate of the shock properties in solid D-T layers. Furthermore, to verify and improve the surrogacymore » of the liquid-filled keyhole measurements, we have developed a technique to form a solid layer inside the keyhole capsule. The layer is typically uniform over a 400-μm-diameter area. This is sufficient to allow direct measurement of the shock velocity. This layering technique has been successfully applied to 13 experiments on the NIF. The technique may also be applicable to fast-igniter experiments since some proposed designs resemble keyhole targets. We discuss our method in detail and give representative results.« less

Social representations of obstetricians and neonatologists about fetal and early neonatal death certificate in the city of São Paulo.

PubMed

Schoeps, Daniela; Lefevre, Fernando; Silva, Zilda Pereira; Novaes, Hillegonda Maria Dutilh; Raspantini, Priscila Ribeiro; de Almeida, Márcia Furquim

2014-01-01

The insatisfactory completeness of the variables in the Death Certificate (DC) makes it difficult to obtain specific perinatal mortality indicators. To assess the social representation of physicians about the perinatal DC. Twenty-five physicians were interviewed in 15 hospitals in the city of São Paulo, in 2009. Qualitative analysis was performed with the Collective Subject Discourse technique. The DC is primarily considered according to its legal aspect. Physicians feel responsible for fulfilling the cause of death. The majority of them reported receiving help from other professionals to complete information on maternal characteristics and identification variables. There is lack of information on the mother's pre-natal conditions, which can make it difficult to identify the perinatal cause of death, mainly in the Unified Health System (SUS) hospitals. Some participants received specific DC training only when attending medical schools. The organization of medical work may affect the completion of the DC, especially in hospitals from SUS. Other professionals contributed to this task and their training can improve the quality of information.

Patient-Directed Valgus Stress Radiograph of the Knee: A New and Novel Technique.

PubMed

Mauerhan, David R; Cook, Kyle D; Botts, Tonia D; Williams, Sherita T

2016-01-01

The radiographic investigation of patients with medial-compartment osteoarthritis of the knee is a critical element in the decision-making process of determining whether the patient is a candidate for unicompartmental or total knee arthroplasty. A valgus stress radiograph of the affected knee is an essential part of this radiographic investigation. Historically, this has been performed with manual stress applied by the surgeon or the radiologic technologist; thus, this examination requires 2 individuals to complete. In addition to being inefficient, 1 individual is exposed to radiation, which can be undesirable over many exposures and in a long career. For these reasons, we instituted a quality improvement project to develop a method of obtaining the valgus stress view with 1 technologist that would obviate these concerns. Of 78 examinations performed, 5 studies did not show complete correction of the varus deformity. Of these, 3 showed complete correction on a manual valgus stress radiograph, and 2 did not. Three patients displayed collapse of the lateral compartment, indicating a nonfunctional lateral compartment. The remaining 70 patients had identical radiographic results with both the manual and patient-directed valgus stress.

Structuralized box-trainer laparoscopic training significantly improves performance in complex virtual reality laparoscopic tasks.

PubMed

Laski, Dariusz; Stefaniak, Tomasz J; Makarewicz, Wojciech; Proczko, Monika; Gruca, Zbigniew; Sledziński, Zbigniew

2012-03-01

In the era of flowering minimally invasive surgical techniques there is a need for new methods of teaching surgery and supervision of progress in skills and expertise. Virtual and physical box-trainers seem especially fit for this purpose, and allow for improvement of proficiency required in laparoscopic surgery. The study included 34 students who completed the authors' laparoscopic training on physical train-boxes. Progress was monitored by accomplishment of 3 exercises: moving pellets from one place to another, excising and clipping. Analysed parameters included time needed to complete the exercise and right and left hand movement tracks. Students were asked to do assigned tasks prior to, in the middle and after the training. The duration of the course was 28 h in total. Significant shortening of the time to perform each exercise and reduction of the left hand track were achieved. The right hand track was shortened only in exercise number 1. Exercises in the laboratory setting should be regarded as an important element of the process of skills acquisition by a young surgeon. Virtual reality laparoscopic training seems to be a new, interesting educational tool, and at the same time allows for reliable control and assessment of progress.

Laboratory investigation of the efficacy of holmium:YAG laser irradiation in removing intracanal debris

NASA Astrophysics Data System (ADS)

Nuebler-Moritz, Michael; Gutknecht, Norbert; Sailer, Hermann F.; Hering, Peter; Prettl, Wilhelm

1997-05-01

Current endodontic therapy involves debridement and disinfection of the root canal by means of mechanical instrumentation and chemical irrigation. However, several studies have shown that these techniques fail to achieve complete cleansing. Recently, lasers have been suggested for use within root canals. This study was conducted to determine the efficacy of Holmium:YAG laser irradiation in removing intracanal debris and smear layer. Root canal surfaces of freshly-extracted human teeth were exposed to pulsed Ho:YAG laser radiation. Subsequently, laser induced structural changes were investigated using scanning electron microscopy. Temperature measurements during irradiation were performed by means of thermocouples. The result of this survey give a preliminary indication of the ability of the Ho:YAG laser to improve current endodontic treatment survey give a preliminary indication of the ability of the Ho:YAG laser to improve current endodontic treatment modalities. However, limitations exist with regard to circumscribed and well-quantified irradiation of root canal surfaces, due to the lack of perpendicular delivery of the laser beam. Additional studies will be required to develop suitable optical transmission systems, in order to achieve complete cleansing and to avoid damage to the periradicular tissues, respectively.

Teen CHAT: Development and Utilization of a Web-Based Intervention to Improve Physician Communication with Adolescents About Healthy Weight

PubMed Central

Bravender, Terrill; Tulsky, James A.; Farrell, David; Alexander, Stewart C.; Østbye, Truls; Lyna, Pauline; Dolor, Rowena J.; Coffman, Cynthia J.; Bilheimer, Alicia; Lin, Pao-Hwa; Pollak, Kathryn I.

2013-01-01

Objective To describe the theoretical basis, use, and satisfaction with Teen CHAT, an online educational intervention designed to improve physician-adolescent communication about healthy weight. Methods Routine health maintenance encounters between pediatricians and family practitioners and their overweight adolescent patients were audio recorded, and content was coded to summarize adherence with motivational interviewing techniques. An online educational intervention was developed using constructs from social cognitive theory and using personalized audio recordings. Physicians were randomized to the online intervention or not, and completed post-intervention surveys. Results Forty-six physicians were recruited, and 22 physicians were randomized to view the intervention website. The educational intervention took an average of 54 minutes to complete, and most physicians thought it was useful, that they would use newly acquired skills with their patients, and would recommend it to others. Fewer physicians thought it helped them address confidentiality issues with their adolescent patients. Conclusion The Teen CHAT online intervention shows potential for enhancing physician motivational interviewing skills in an acceptable and time-efficient manner. Practice Implications If found to be effective in enhancing motivational interviewing skills and changing adolescent weight-related behaviors, wide dissemination will be feasible and indicated. PMID:24021419

Sub-meninges implantation reduces immune response to neural implants.

PubMed

Markwardt, Neil T; Stokol, Jodi; Rennaker, Robert L

2013-04-15

Glial scar formation around neural interfaces inhibits their ability to acquire usable signals from the surrounding neurons. To improve neural recording performance, the inflammatory response and glial scarring must be minimized. Previous work has indicated that meningeally derived cells participate in the immune response, and it is possible that the meninges may grow down around the shank of a neural implant, contributing to the formation of the glial scar. This study examines whether the glial scar can be reduced by placing a neural probe completely below the meninges. Rats were implanted with sets of loose microwire implants placed either completely below the meninges or implanted conventionally with the upper end penetrating the meninges, but not attached to the skull. Histological analysis was performed 4 weeks following surgical implantation to evaluate the glial scar. Our results found that sub-meninges implants showed an average reduction in reactive astrocyte activity of 63% compared to trans-meninges implants. Microglial activity was also reduced for sub-meninges implants. These results suggest that techniques that isolate implants from the meninges offer the potential to reduce the encapsulation response which should improve chronic recording quality and stability. Published by Elsevier B.V.

Sub-meninges Implantation Reduces Immune Response to Neural Implants

PubMed Central

Markwardt, Neil T.; Stokol, Jodi; Rennaker, Robert L.

2013-01-01

Glial scar formation around neural interfaces inhibits their ability to acquire usable signals from the surrounding neurons. To improve neural recording performance, the inflammatory response and glial scarring must be minimized. Previous work has indicated that meningeally derived cells participate in the immune response, and it is possible that the meninges may grow down around the shank of a neural implant, contributing to the formation of the glial scar. This study examines whether the glial scar can be reduced by placing a neural probe completely below the meninges. Rats were implanted with sets of loose microwire implants placed either completely below the meninges or implanted conventionally with the upper end penetrating the meninges, but not attached to the skull. Histological analysis was performed 4 weeks following surgical implantation to evaluate the glial scar. Our results found that sub-meninges implants showed an average reduction in reactive astrocyte activity of 63% compared to trans-meninges implants. Microglial activity was also reduced for sub-meninges implants. These results suggest that techniques that isolate implants from the meninges offer the potential to reduce the encapsulation response which should improve chronic recording quality and stability. PMID:23370311

Balance training using an interactive game to enhance the use of the affected side after stroke.

PubMed

Ciou, Shih-Hsiang; Hwang, Yuh-Shyan; Chen, Chih-Chen; Chen, Shih-Ching; Chou, Shih-Wei; Chen, Yu-Luen

2015-12-01

[Purpose] Stroke and other cerebrovascular diseases are major causes of adult mobility problems. Because stroke immobilizes the affected body part, balance training uses the healthy body part to complete the target movement. The muscle utilization rate on the stroke affected side is often reduced which further hinders affected side functional recovery in rehabilitation. [Subjects and Methods] This study tested a newly-developed interactive device with two force plates to measuring right and left side centers of pressure, to establish its efficacy in the improvement of the static standing ability of patients with hemiplegia. An interactive virtual reality game with different side reaction ratios was used to improve patient balance. The feasibility of the proposed approach was experimentally demonstrated. [Results] Although the non-affected-side is usually used to support the body weight in the standing position, under certain circumstances the patients could switch to using the affected side. A dramatic improvement in static standing balance control was achieved in the eyes open condition. [Conclusion] The proposed dual force plate technique used in this study separately measured the affected and non-affected-side centers of pressure. Based on this approach, different side ratio integration was achieved using an interactive game that helped stroke patients improve balance on the affected side. Only the patient who had suffered stroke relatively recently benefited significantly. The proposed technique is of little benefit for patients whose mobility has stagnated to a certain level.

Use of a formal assessment instrument for evaluation of veterinary student surgical skills.

PubMed

Schnabel, Lauren V; Maza, Paul S; Williams, Kimberly M; Irby, Nita L; McDaniel, Carolyn M; Collins, Brian G

2013-05-01

To (1) evaluate the design and use of a global rating scale assessment instrument in veterinary medical education and; (2) examine the effectiveness of 2 surgical techniques courses for improving the surgical skills of veterinary students. Instrument development; observational; survey-based. Students (n = 16) registered for 2 elective surgical techniques courses were enrolled on a volunteer basis. A 5-point global rating scale instrument was designed for the evaluation of 12 basic surgical skills by faculty evaluators and used to obtain student start and end scores during the courses. Upon conclusion of the courses, students completed a survey from which their opinions on their improvement as well as their desire for feedback were obtained. All authors agreed the instrument was easy to use. As groups, 3rd year students, 4th year students, and all students combined had significantly higher total skill scores at the end of the courses compared to the start of the courses. Individually, 10 students (63%) had significant improvement in surgical skills as a result of their participation in the courses: 4 (100%) 3rd year and 6 (50%) 4th year students. Student survey responses revealed a strong desire for feedback as well as support of formal assessment methods. Only weak agreement was found between student opinions on their improvement and the authors' assessment scores. Assessment instruments are useful for (1) student evaluation and (2) for providing students with feedback on their surgical skills. © Copyright 2013 by The American College of Veterinary Surgeons.

Repair of a complete radial tear in the midbody of the medial meniscus using a novel crisscross suture transtibial tunnel surgical technique: a case report.

PubMed

James, Evan W; LaPrade, Christopher M; Feagin, John A; LaPrade, Robert F

2015-09-01

Complete radial meniscus tears have been reported to result in deleterious effects in the knee joint if left unrepaired. An emphasis on meniscal preservation is important in order to restore native meniscal function. In this case report, a complete radial tear of the medial meniscus midbody was repaired using a novel crisscross suture transtibial technique. This technique secured the anterior and posterior meniscal horns, which were released from their extruded and scarred position along the capsule, using crisscrossing sutures passed through two transtibial tunnels and secured over a bone bridge on the anterolateral tibia. In addition, the repair was supplemented with the injection of platelet-rich plasma and bone marrow aspirate concentrate to promote the healing of the meniscal tissue. Complete healing on second-look arthroscopy is presented, including in the previously unreported white-white meniscal zone.

Empowering family physicians to impart proper inhaler teaching to patients with chronic obstructive pulmonary disease and asthma

PubMed Central

Leung, Janice M; Bhutani, Mohit; Leigh, Richard; Pelletier, Dan; Good, Cathy; Sin, Don D

2015-01-01

BACKGROUND: Patients with chronic obstructive pulmonary disease (COPD) and asthma depend on inhalers for management, but critical errors committed during inhaler use can limit drug effectiveness. Outpatient education in inhaler technique remains inconsistent due to limited resources and inadequate provider knowledge. OBJECTIVE: To determine whether a simple, two-session inhaler education program can improve physician attitudes toward inhaler teaching in primary care practice. METHODS: An inhaler education program with small-group hands-on device training was instituted for family physicians (FP) in British Columbia and Alberta. Sessions were spaced one to three months apart. All critical errors were corrected in the first session. Questionnaires surveying current inhaler teaching practices and attitudes toward inhaler teaching were distributed to physicians before and after the program. RESULTS: Forty-one (60%) of a total 68 participating FPs completed both before and after program questionnaires. Before the program, only 20 (49%) reported providing some form of inhaler teaching in their practices, and only four (10%) felt fully competent to teach patients inhaler technique. After the program, 40 (98%) rated their inhaler teaching as good to excellent. Thirty-four (83%) reported providing inhaler teaching in their practices, either by themselves or by an allied health care professional they had personally trained. All stated they could teach inhaler technique within 5 min. Observation of FPs during the second session by certified respiratory educators found that none made critical errors and all had excellent technique. CONCLUSION: A physician inhaler education program can improve attitudes toward inhaler teaching and facilitate implementation in clinical practices. PMID:26436910

Application of process improvement principles to increase the frequency of complete airway management documentation.

PubMed

McCarty, L Kelsey; Saddawi-Konefka, Daniel; Gargan, Lauren M; Driscoll, William D; Walsh, John L; Peterfreund, Robert A

2014-12-01

Process improvement in healthcare delivery settings can be difficult, even when there is consensus among clinicians about a clinical practice or desired outcome. Airway management is a medical intervention fundamental to the delivery of anesthesia care. Like other medical interventions, a detailed description of the management methods should be documented. Despite this expectation, airway documentation is often insufficient. The authors hypothesized that formal adoption of process improvement methods could be used to increase the rate of "complete" airway management documentation. The authors defined a set of criteria as a local practice standard of "complete" airway management documentation. The authors then employed selected process improvement methodologies over 13 months in three iterative and escalating phases to increase the percentage of records with complete documentation. The criteria were applied retrospectively to determine the baseline frequency of complete records, and prospectively to measure the impact of process improvements efforts over the three phases of implementation. Immediately before the initial intervention, a retrospective review of 23,011 general anesthesia cases over 6 months showed that 13.2% of patient records included complete documentation. At the conclusion of the 13-month improvement effort, documentation improved to a completion rate of 91.6% (P<0.0001). During the subsequent 21 months, the completion rate was sustained at an average of 90.7% (SD, 0.9%) across 82,571 general anesthetic records. Systematic application of process improvement methodologies can improve airway documentation and may be similarly effective in improving other areas of anesthesia clinical practice.

Complete measurement of spatiotemporally complex multi-spatial-mode ultrashort pulses from multimode optical fibers using delay-scanned wavelength-multiplexed holography.

PubMed

Zhu, Ping; Jafari, Rana; Jones, Travis; Trebino, Rick

2017-10-02

We introduce a simple delay-scanned complete spatiotemporal intensity-and-phase measurement technique based on wavelength-multiplexed holography to characterize long, complex pulses in space and time. We demonstrate it using pulses emerging from multi-mode fiber. This technique extends the temporal range and spectral resolution of the single-frame STRIPED FISH technique without using an otherwise-required expensive ultranarrow-bandpass filter. With this technique, we measured the complete intensity and phase of up to ten fiber modes from a multi-mode fiber (normalized frequency V ≈10) over a ~3ps time range. Spatiotemporal complexities such as intermodal delay, modal dispersion, and material dispersion were also intuitively displayed by the retrieved results. Agreement between the reconstructed color movies and the monitored time-averaged spatial profiles confirms the validity to this delay-scanned STRIPED FISH method.

Debulking Surgery for Elephantiasis Nostras With Large Ectatic Podoplanin-Negative Lymphatic Vessels in Patients With Lipo-Lymphedema

PubMed Central

Wollina, Uwe; Heinig, Birgit; Schönlebe, Jaqueline; Nowak, Andreas

2014-01-01

Objective: Elephantiasis nostras is a rare complication in advanced lipo-lymphedema. While lipedema can be treated by liposuction and lymphedema by decongestive lymphatic therapy, elephantiasis nostras may need debulking surgery. Methods: We present 2 cases of advanced lipo-lymphedema complicated by elephantiasis nostras. After tumescent microcannular laser-assisted liposuction both patients underwent a debulking surgery with a modification of Auchincloss-Kim's technique. Histologic examination of the tissue specimen was performed. Results: The surgical treatment was well tolerated and primary healing was uneventful. After primary wound healing and ambulation of the patients, a delayed ulceration with lymphorrhea developed. It was treated by surgical necrectomy and vacuum-assisted closure leading to complete healing. Mobility of the leg was much improved. Histologic examination revealed massive ectatic lymphatic vessels nonreactive for podoplanin. Conclusions: Debulking surgery can be an adjuvant technique for elephantiasis nostras in advanced lipo-lymphedema. Although delayed postoperative wound healing problems were observed, necrectomy and vacuum-assisted closure achieved a complete healing. Histologic data suggest that the ectatic lymphatic vessels in these patients resemble finding in podoplanin knockout mice. The findings would explain the limitations of decongestive lymphatic therapy and tumescent liposuction in such patients and their predisposition to relapsing erysipelas. PMID:24741382

Bell's palsy and partial hypoglossal to facial nerve transfer: Case presentation and literature review

PubMed Central

Socolovsky, Mariano; Páez, Miguel Domínguez; Masi, Gilda Di; Molina, Gonzalo; Fernández, Eduardo

2012-01-01

Background: Idiopathic facial nerve palsy (Bell's palsy) is a very common condition that affects active population. Despite its generally benign course, a minority of patients can remain with permanent and severe sequelae, including facial palsy or dyskinesia. Hypoglossal to facial nerve anastomosis is rarely used to reinnervate the mimic muscle in these patients. In this paper, we present a case where a direct partial hypoglossal to facial nerve transfer was used to reinnervate the upper and lower face. We also discuss the indications of this procedure. Case Description: A 53-year-old woman presenting a spontaneous complete (House and Brackmann grade 6) facial palsy on her left side showed no improvement after 13 months of conservative treatment. Electromyography (EMG) showed complete denervation of the mimic muscles. A direct partial hypoglossal to facial nerve anastomosis was performed, including dissection of the facial nerve at the fallopian canal. One year after the procedure, the patient showed House and Brackmann grade 3 function in her affected face. Conclusions: Partial hypoglossal–facial anastomosis with intratemporal drilling of the facial nerve is a viable technique in the rare cases in which severe Bell's palsy does not recover spontaneously. Only carefully selected patients can really benefit from this technique. PMID:22574255

Transarterial Coil-Augmented Onyx Embolization for Brain Arteriovenous Malformation

PubMed Central

Gao, Xu; Liang, Guobiao; Li, Zhiqing; Wang, Xiaogang; Yu, Chunyong; Cao, Peng; Chen, Jun; Li, Jingyuan

2014-01-01

Summary Onyx has been widely adopted for the treatment of arteriovenous malformations (AVMs). However, its control demands operators accumulate a considerable learning curve. We describe our initial experience using a novel injection method for the embolization of AVMs. We retrospectively reviewed the data of all 22 patients with brain AVMs (12 men, 10 women; age range, 12-68 years; mean age, 43.2 years) treated by the transarterial coil-augmented Onyx injection technique. The size of the AVMs ranged from 25 mm to 70 mm (average 35.6 mm). The technical feasibility of the procedure, procedure-related complications, angiographic results, and clinical outcome were evaluated. In every case, endovascular treatment (EVT) was completed. A total of 31 sessions were performed, with a mean injection volume of 6.1 mL (range, 1.5-16.0 mL). An average of 96.7% (range 85%-100%) estimated size reduction was achieved, and 18 AVMs could be completely excluded by EVT alone. The results remained stable on follow-up angiograms. A procedural complication occurred in one patient, with permanent mild neurologic deficit. Our preliminary series demonstrated that the coil-augmented Onyx injection technique is a valuable adjunct achieving excellent nidal penetration and improving the safety of the procedure. PMID:24556304

D Cultural Heritage Documentation: a Comparison Between Different Photogrammetric Software and Their Products

NASA Astrophysics Data System (ADS)

Gagliolo, S.; Ausonio, E.; Federici, B.; Ferrando, I.; Passoni, D.; Sguerso, D.

2018-05-01

The conservation of Cultural Heritage depends on the availability of means and resources and, consequently, on the possibility to make effective operations of data acquisition. In facts, on the one hand the creation of data repositories allows the description of the present state-of-art, in order to preserve the testimonial value and to permit the fruition. On the other hand, data acquisition grants a metrical knowledge, which is particularly useful for a direct restoration of the surveyed objects, through the analysis of their 3D digital models. In the last decades, the continuous increase and improvement of 3D survey techniques and of tools for the geometric and digital data management have represented a great support to the development of documentary activities. In particular, Photogrammetry is a survey technique highly appropriate in the creation of data repositories in the field of Cultural Heritage, thanks to its advantages of cheapness, flexibility, speed, and the opportunity to ensure the operators' safety in hazardous areas too. In order to obtain a complete documentation, the high precision of the on-site operations must be coupled with an effective post-processing phase. Hence, a comparison among some of the photogrammetric software currently available was performed by the authors, with a particular attention to the workflow completeness and the final products quality.

Some practical universal noiseless coding techniques, part 2

NASA Technical Reports Server (NTRS)

Rice, R. F.; Lee, J. J.

1983-01-01

This report is an extension of earlier work (Part 1) which provided practical adaptive techniques for the efficient noiseless coding of a broad class of data sources characterized by only partially known and varying statistics (JPL Publication 79-22). The results here, while still claiming such general applicability, focus primarily on the noiseless coding of image data. A fairly complete and self-contained treatment is provided. Particular emphasis is given to the requirements of the forthcoming Voyager II encounters of Uranus and Neptune. Performance evaluations are supported both graphically and pictorially. Expanded definitions of the algorithms in Part 1 yield a computationally improved set of options for applications requiring efficient performance at entropies above 4 bits/sample. These expanded definitions include as an important subset, a somewhat less efficient but extremely simple "FAST' compressor which will be used at the Voyager Uranus encounter. Additionally, options are provided which enhance performance when atypical data spikes may be present.

Artificial ascites and pneumoperitoneum to facilitate thermal ablation of liver tumors: a pictorial essay.

PubMed

Bhagavatula, Sharath K; Chick, Jeffrey F B; Chauhan, Nikunj R; Shyn, Paul B

2017-02-01

Image-guided percutaneous thermal ablation is increasingly utilized in the treatment of hepatic malignancies. Peripherally located hepatic tumors can be difficult to access or located adjacent to critical structures that can be injured. As a result, ablation of peripheral tumors may be avoided or may be performed too cautiously, leading to inadequate ablation coverage. In these cases, separating the tumor from adjacent critical structures can increase the efficacy and safety of procedures. Artificial ascites and artificial pneumoperitoneum are techniques that utilize fluid and gas, respectively, to insulate critical structures from the thermal ablation zone. Induction of artificial ascites and artificial pneumoperitoneum can enable complete ablation of otherwise inaccessible hepatic tumors, improve tumor visualization, minimize unintended thermal injury to surrounding organs, and reduce post-procedural pain. This pictorial essay illustrates and discusses the proper technique and clinical considerations for successful artificial ascites and pneumoperitoneum creation to facilitate safe peripheral hepatic tumor ablation.

Voyager Cartography

NASA Technical Reports Server (NTRS)

Batson, R. M.; Bridges, P. M.; Mullins, K. F.

1985-01-01

The Jovian and Saturnian satellites are being mapped at several scales from Voyager 1 and 2 data. The maps include specially formatted color mosaics, controlled photomosaics, and airbrush maps. More than 500 Voyager images of the Jovian and Saturnian satellites were radiometrically processed in preparation for cartographic processing. Of these images, 235 were geometrically transformed to map projections for base mosaic compilations. Special techniques for producing hybrid photomosaic/airbrush maps of Callisto are under investigation. The techniques involve making controlled computer mosaics of all available images with highest resolution images superimposed on lowest resolution images. The mosaics are then improved by airbrushing: seams and artifacts are removed, and image details enhanced that had been lost by saturation in some images. A controlled mosaic of the northern hemisphere of Rhea is complete, as is all processing for a similar mosaic of the equatorial region. Current plans and status of the various series are shown in a table.

Daytime Cloud Property Retrievals Over the Arctic from Multispectral MODIS Data

NASA Technical Reports Server (NTRS)

Spangenberg, Douglas A.; Trepte, Qing; Minnis, Patrick; Uttal, Taneil

2004-01-01

Improving climate model predictions over Earth's polar regions requires a complete understanding of polar clouds properties. Passive satellite remote sensing techniques can be used to retrieve macro and microphysical properties of polar cloud systems. However, over the Arctic, there is minimal contrast between clouds and the background snow surface observed in satellite data, especially for visible wavelengths. This makes it difficult to identify clouds and retrieve their properties from space. Variable snow and ice cover, temperature inversions, and the predominance of mixed-phase clouds further complicate cloud property identification. For this study, the operational Clouds and the Earth s Radiant Energy System (CERES) cloud mask is first used to discriminate clouds from the background surface in Terra Moderate Resolution Imaging Spectroradiometer (MODIS) data. A solar-infrared infrared nearinfrared technique (SINT) first used by Platnick et al. (2001) is used here to retrieve cloud properties over snow and ice covered regions.

Recent developments in separation of low molecular weight heparin anticoagulants.

PubMed

Sadowski, Radosław; Gadzała-Kopciuch, Renata; Buszewski, Bogusław

2017-10-05

The general function of anticoagulants is to prevent blood clotting and growing of the existing clots in blood vessels. In recent years, there has been a significant improvement in developing methods of prevention as well as pharmacologic and surgical treatment of thrombosis. For over the last two decades, low molecular weight heparins (LMWHs) have found their application in the antithrombotic diseases treatment. These types of drugs are widely used in clinical therapy. Despite the biological and medical importance of LMWHs, they have not been completely characterized in terms of their chemical structure. Due to both, the structural complexity of these anticoagulants and the presence of impurities, their structural characterization requires the employment of advanced analytical techniques. Since separation techniques play the key role in these endeavors, this review will focus on the presentation of recent developments in the separation of LMWH anticoagulants. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

Rectus sheath block: successful use in the chronic pain management of pediatric abdominal wall pain.

PubMed

Skinner, Adam V; Lauder, Gillian R

2007-12-01

Seven pediatric patients (aged 11-16 years) with chronic abdominal wall pain are presented who gained significant relief from a rectus sheath block (RSB). We describe the case histories and review the relevant literature for this technique. The etiology of the abdominal wall pain was considered to be abdominal cutaneous nerve entrapment, iatrogenic peripheral nerve injury, myofascial pain syndrome or was unknown. All patients showed significant initial improvement in pain and quality of life. Three patients required only the RSB to enable them to be pain-free and return to normal schooling and physical activities. Two children received complete relief for more than 1 year. In the majority of cases, the procedure was carried out under general anesthesia as a daycase procedure. Local anesthetic and steroids were used. This is the first report of the successful use of this technique in the chronic pain management setting in children.

Surgical management of renal cell cancer with tumor thrombus through an exclusive transabdominal approach.

PubMed

González, Javier; Angulo, J; Ciancio, G

2011-04-01

Renal cell cancer with tumor thrombus is present in 4-15% of cases. The prognostic significance of this entity has been object of intense debate. Nowadays, it is considered, that the presence of thrombus itself does not have a negative prognostic impact on survival rates if the thrombus could be excised satisfactorily. Complete removal of renal malignant tissue is the only curative strategy for the treatment of this kind of tumors. During the last three decades, there has been steady improvements in surgical technique and preoperative care fields that have favorably modified the surgeons' ability to safely excise these tumors. In this sense, the experience provided by multiorgan, kidney-pancreas and liver procurement and transplantation techniques led the urologists reexamine their approaches to the inferior vena cava and retroperitoneum, thus they could result useful in the always challenging resection of these complex tumors with neoplasic extension into the vena cava.

Ab-interno scleral suture loop fixation with cow-hitch knot in posterior chamber intraocular lens decentration

PubMed Central

Can, Ertuğrul; Koçak, Nurullah; Yücel, Özlem Eşki; Gül, Adem; Öztürk, Hilal Eser; Sayın, Osman

2016-01-01

Aim of Study: To describe a simplified ab-interno cow-hitch suture fixation technique for repositioning decentered posterior chamber intraocular lens (PC IOL). Materials and Methods: Two cases are presented with the surgical correction of decentered and subluxated IOL. Ab-interno scleral suture fixation technique with hitch-cow knot in the eye was performed with a ciliary sulcus guide instrument and 1 year follow-up was completed. Results: Both of the patients had well centered lenses postoperatively. Corrected distant and near visual acuities of the patients were improved. There was no significant postoperative complication. In the follow-up period of 1 year, no evidence of suture erosion was found. Conclusions: Ab-interno scleral suture loop fixation with hitch-cow knot in the eye was effective in repositioning decentered or subluxated PC IOLs with excellent postoperative centered lenses and visual outcomes. PMID:27050346

Case studies from Oman for coiled tubing deployed completion techniques

DOE Office of Scientific and Technical Information (OSTI.GOV)

Taylor, R.W.; Conrad, B.

1996-09-01

Although the use of ultra-large coiled tubing to complete wells is relatively new, it is gaining widespread industry application. This paper will detail the equipment necessary to perform an operation of this type and will present information from several case studies in Oman in which an operator has successfully deployed completion equipment on 3-1/2-inch-OD coiled tubing. In addition to a discussion of the equipment required to perform the necessary operations, the trial parameters that were established by this operator will be given. The information presented has been selected to allow an initial evaluation to be made of coiled tubing completionsmore » in general and will help to determine whether this method can prove to be less expensive than traditional rig-based completions. The topics presented have been chosen to provide the reader with a thorough understanding of the techniques and preparation needed to execute a coiled tubing completion. The summary of experiences will conclude that this innovative completion technique can be a viable method for completing wells. Although long-term advantages regarding production and well maintenance cannot yet be determined, the operator`s experiences to date have confirmed his initial belief that use of coiled tubing in ultra-large continuous-pipe applications can be cost effective.« less

Millimeter Wave and Terahertz Synthetic Aperture Radar for Locating Metallic Scatterers Embedded in Scattering Media

NASA Astrophysics Data System (ADS)

Richard, Jonathan T.; Everitt, Henry O.

2017-11-01

A rail-mounted synthetic aperture radar has been constructed to operate at W-band (75 - 110 GHz) and a THz band (325 - 500 GHz) in order to ascertain its ability to locate isolated small, visually obscured metallic scatterers embedded in highly scattering dielectric hosts that are either semi-transparent or opaque. A top view 2D algorithm was used to reconstruct scenes from the acquired data, locating metallic scatterers at W-band with high range and cross-range resolution of 4.3 and 2 mm, respectively, and with improved range resolution of 0.86 mm at the THz band. Millimeter-sized metallic scatterers were easily located when embedded in semi-transparent, highly scattering target hosts of Styrofoam and waxy packing foam but were more difficult to locate when embedded in relatively opaque, highly scattering Celotex panels. Although the THz band provided the expected greater spatial resolution, it required the target to be moved closer to the rail and had a more limited field of view that prevented some targets from being identified. Techniques for improving the signal to noise ratio are discussed. This work establishes a path for developing techniques to render a complete 3D reconstruction of a scene.

Improving MEG source localizations: an automated method for complete artifact removal based on independent component analysis.

PubMed

Mantini, D; Franciotti, R; Romani, G L; Pizzella, V

2008-03-01

The major limitation for the acquisition of high-quality magnetoencephalography (MEG) recordings is the presence of disturbances of physiological and technical origins: eye movements, cardiac signals, muscular contractions, and environmental noise are serious problems for MEG signal analysis. In the last years, multi-channel MEG systems have undergone rapid technological developments in terms of noise reduction, and many processing methods have been proposed for artifact rejection. Independent component analysis (ICA) has already shown to be an effective and generally applicable technique for concurrently removing artifacts and noise from the MEG recordings. However, no standardized automated system based on ICA has become available so far, because of the intrinsic difficulty in the reliable categorization of the source signals obtained with this technique. In this work, approximate entropy (ApEn), a measure of data regularity, is successfully used for the classification of the signals produced by ICA, allowing for an automated artifact rejection. The proposed method has been tested using MEG data sets collected during somatosensory, auditory and visual stimulation. It was demonstrated to be effective in attenuating both biological artifacts and environmental noise, in order to reconstruct clear signals that can be used for improving brain source localizations.

Molecular Methods for the Detection of Mycoplasma and Ureaplasma Infections in Humans

PubMed Central

Waites, Ken B.; Xiao, Li; Paralanov, Vanya; Viscardi, Rose M.; Glass, John I.

2012-01-01

Mycoplasma and Ureaplasma species are well-known human pathogens responsible for a broad array of inflammatory conditions involving the respiratory and urogenital tracts of neonates, children, and adults. Greater attention is being given to these organisms in diagnostic microbiology, largely as a result of improved methods for their laboratory detection, made possible by powerful molecular-based techniques that can be used for primary detection in clinical specimens. For slow-growing species, such as Mycoplasma pneumoniae and Mycoplasma genitalium, molecular-based detection is the only practical means for rapid microbiological diagnosis. Most molecular-based methods used for detection and characterization of conventional bacteria have been applied to these organisms. A complete genome sequence is available for one or more strains of all of the important human pathogens in the Mycoplasma and Ureaplasma genera. Information gained from genome analyses and improvements in efficiency of DNA sequencing are expected to significantly advance the field of molecular detection and genotyping during the next few years. This review provides a summary and critical review of methods suitable for detection and characterization of mycoplasmas and ureaplasmas of humans, with emphasis on molecular genotypic techniques. PMID:22819362

Application of copulas to improve covariance estimation for partial least squares.

PubMed

D'Angelo, Gina M; Weissfeld, Lisa A

2013-02-20

Dimension reduction techniques, such as partial least squares, are useful for computing summary measures and examining relationships in complex settings. Partial least squares requires an estimate of the covariance matrix as a first step in the analysis, making this estimate critical to the results. In addition, the covariance matrix also forms the basis for other techniques in multivariate analysis, such as principal component analysis and independent component analysis. This paper has been motivated by an example from an imaging study in Alzheimer's disease where there is complete separation between Alzheimer's and control subjects for one of the imaging modalities. This separation occurs in one block of variables and does not occur with the second block of variables resulting in inaccurate estimates of the covariance. We propose the use of a copula to obtain estimates of the covariance in this setting, where one set of variables comes from a mixture distribution. Simulation studies show that the proposed estimator is an improvement over the standard estimators of covariance. We illustrate the methods from the motivating example from a study in the area of Alzheimer's disease. Copyright © 2012 John Wiley & Sons, Ltd.

Measuring partial fluorescence yield using filtered detectors.

PubMed

Boyko, T D; Green, R J; Moewes, A; Regier, T Z

2014-07-01

Typically, X-ray absorption near-edge structure measurements aim to probe the linear attenuation coefficient. These measurements are often carried out using partial fluorescence yield techniques that rely on detectors having photon energy discrimination improving the sensitivity and the signal-to-background ratio of the measured spectra. However, measuring the partial fluorescence yield in the soft X-ray regime with reasonable efficiency requires solid-state detectors, which have limitations due to the inherent dead-time while measuring. Alternatively, many of the available detectors that are not energy dispersive do not suffer from photon count rate limitations. A filter placed in front of one of these detectors will make the energy-dependent efficiency non-linear, thereby changing the responsivity of the detector. It is shown that using an array of filtered X-ray detectors is a viable method for measuring soft X-ray partial fluorescence yield spectra without dead-time. The feasibility of this technique is further demonstrated using α-Fe2O3 as an example and it is shown that this detector technology could vastly improve the photon collection efficiency at synchrotrons and that these detectors will allow experiments to be completed with a much lower photon flux reducing X-ray-induced damage.

Assessment of the possible contribution of space ties on-board GNSS satellites to the terrestrial reference frame

NASA Astrophysics Data System (ADS)

Bruni, Sara; Rebischung, Paul; Zerbini, Susanna; Altamimi, Zuheir; Errico, Maddalena; Santi, Efisio

2018-04-01

The realization of the international terrestrial reference frame (ITRF) is currently based on the data provided by four space geodetic techniques. The accuracy of the different technique-dependent materializations of the frame physical parameters (origin and scale) varies according to the nature of the relevant observables and to the impact of technique-specific errors. A reliable computation of the ITRF requires combining the different inputs, so that the strengths of each technique can compensate for the weaknesses of the others. This combination, however, can only be performed providing some additional information which allows tying together the independent technique networks. At present, the links used for that purpose are topometric surveys (local/terrestrial ties) available at ITRF sites hosting instruments of different techniques. In principle, a possible alternative could be offered by spacecrafts accommodating the positioning payloads of multiple geodetic techniques realizing their co-location in orbit (space ties). In this paper, the GNSS-SLR space ties on-board GPS and GLONASS satellites are thoroughly examined in the framework of global reference frame computations. The investigation focuses on the quality of the realized physical frame parameters. According to the achieved results, the space ties on-board GNSS satellites cannot, at present, substitute terrestrial ties in the computation of the ITRF. The study is completed by a series of synthetic simulations investigating the impact that substantial improvements in the volume and quality of SLR observations to GNSS satellites would have on the precision of the GNSS frame parameters.

The use of an active learning approach in a SCALE-UP learning space improves academic performance in undergraduate General Biology.

PubMed

Hacisalihoglu, Gokhan; Stephens, Desmond; Johnson, Lewis; Edington, Maurice

2018-01-01

Active learning is a pedagogical approach that involves students engaging in collaborative learning, which enables them to take more responsibility for their learning and improve their critical thinking skills. While prior research examined student performance at majority universities, this study focuses on specifically Historically Black Colleges and Universities (HBCUs) for the first time. Here we present work that focuses on the impact of active learning interventions at Florida A&M University, where we measured the impact of active learning strategies coupled with a SCALE-UP (Student Centered Active Learning Environment with Upside-down Pedagogies) learning environment on student success in General Biology. In biology sections where active learning techniques were employed, students watched online videos and completed specific activities before class covering information previously presented in a traditional lecture format. In-class activities were then carefully planned to reinforce critical concepts and enhance critical thinking skills through active learning techniques such as the one-minute paper, think-pair-share, and the utilization of clickers. Students in the active learning and control groups covered the same topics, took the same summative examinations and completed identical homework sets. In addition, the same instructor taught all of the sections included in this study. Testing demonstrated that these interventions increased learning gains by as much as 16%, and students reported an increase in their positive perceptions of active learning and biology. Overall, our results suggest that active learning approaches coupled with the SCALE-UP environment may provide an added opportunity for student success when compared with the standard modes of instruction in General Biology.

The Clinical Urine Culture: Enhanced Techniques Improve Detection of Clinically Relevant Microorganisms

PubMed Central

Price, Travis K.; Dune, Tanaka; Hilt, Evann E.; Thomas-White, Krystal J.; Kliethermes, Stephanie; Brincat, Cynthia; Brubaker, Linda; Wolfe, Alan J.

2016-01-01

Enhanced quantitative urine culture (EQUC) detects live microorganisms in the vast majority of urine specimens reported as “no growth” by the standard urine culture protocol. Here, we evaluated an expanded set of EQUC conditions (expanded-spectrum EQUC) to identify an optimal version that provides a more complete description of uropathogens in women experiencing urinary tract infection (UTI)-like symptoms. One hundred fifty adult urogynecology patient-participants were characterized using a self-completed validated UTI symptom assessment (UTISA) questionnaire and asked “Do you feel you have a UTI?” Women responding negatively were recruited into the no-UTI cohort, while women responding affirmatively were recruited into the UTI cohort; the latter cohort was reassessed with the UTISA questionnaire 3 to 7 days later. Baseline catheterized urine samples were plated using both standard urine culture and expanded-spectrum EQUC protocols: standard urine culture inoculated at 1 μl onto 2 agars incubated aerobically; expanded-spectrum EQUC inoculated at three different volumes of urine onto 7 combinations of agars and environments. Compared to expanded-spectrum EQUC, standard urine culture missed 67% of uropathogens overall and 50% in participants with severe urinary symptoms. Thirty-six percent of participants with missed uropathogens reported no symptom resolution after treatment by standard urine culture results. Optimal detection of uropathogens could be achieved using the following: 100 μl of urine plated onto blood (blood agar plate [BAP]), colistin-nalidixic acid (CNA), and MacConkey agars in 5% CO2 for 48 h. This streamlined EQUC protocol achieved 84% uropathogen detection relative to 33% detection by standard urine culture. The streamlined EQUC protocol improves detection of uropathogens that are likely relevant for symptomatic women, giving clinicians the opportunity to receive additional information not currently reported using standard urine culture techniques. PMID:26962083

Mitigation and control of the overcuring effect in mask projection micro-stereolithography

NASA Astrophysics Data System (ADS)

O'Neill, Paul F.; Kent, Nigel; Brabazon, Dermot

2017-10-01

Mask Projection micro-Stereolithography (MPμSL) is an additive manufacturing technique capable of producing solid parts with micron-scale resolution from a vat of photocurable liquid polymer resin. Although the physical mechanism remains the same, the process differs from traditional laser-galvanometer based stereolithography (SL) in its use of a dynamic mask UV projector, or digital light processor (DLP), which cures each location within each 3D layer at the same time. One area where MPµSL has garnered considerable attention is in the field of microfluidics and Lab-on-a-Chip, where complex multistep microfabrication techniques adopted from the semiconductor industry are still widely used, and where MPµSL offers the ability to fabricate completely encapsulated fluidic channels in a single step and at low cost [1-3]. However, a significant obstacle exists in the prevention of channel blockage due to overcuring of the polymer resin [4, 5]. Overcuring can be attributed to the so-called `back side effect' [2] which occurs during the build process as light from successive layers penetrates into the resin to a depth greater than the layer thickness. This effect is most prevalent in channels or features oriented horizontally (in a parallel plane to that of the build platform). Currently there are two main approaches in controlling the cure depth; 1. the chemical approach, which involves doping the resin material with a chemical light absorber [6-8]; and 2. by improving the system's hardware and optical elements to improve the homogeneity of the light dosage and control the cure depth [9]. Here we investigate a third approach through modification of the 3D CAD file prior to printing to mitigate for UV light leakage from successive build layers. Although used here in conjunction with the MPμSL technique, this approach can be applied to a range of SL techniques to improve printer resolution and enable production of internal features with higher dimensional accuracy.

An improved method for precise automatic co-registration of moderate and high-resolution spacecraft imagery

NASA Technical Reports Server (NTRS)

Bryant, Nevin A.; Logan, Thomas L.; Zobrist, Albert L.

2006-01-01

Improvements to the automated co-registration and change detection software package, AFIDS (Automatic Fusion of Image Data System) has recently completed development for and validation by NGA/GIAT. The improvements involve the integration of the AFIDS ultra-fine gridding technique for horizontal displacement compensation with the recently evolved use of Rational Polynomial Functions/ Coefficients (RPFs/RPCs) for image raster pixel position to Latitude/Longitude indexing. Mapping and orthorectification (correction for elevation effects) of satellite imagery defies exact projective solutions because the data are not obtained from a single point (like a camera), but as a continuous process from the orbital path. Standard image processing techniques can apply approximate solutions, but advances in the state-of-the-art had to be made for precision change-detection and time-series applications where relief offsets become a controlling factor. The earlier AFIDS procedure required the availability of a camera model and knowledge of the satellite platform ephemeredes. The recent design advances connect the spacecraft sensor Rational Polynomial Function, a deductively developed model, with the AFIDS ultrafine grid, an inductively developed representation of the relationship raster pixel position to latitude /longitude. As a result, RPCs can be updated by AFIDS, a situation often necessary due to the accuracy limits of spacecraft navigation systems. An example of precision change detection will be presented from Quickbird.

Single-Staged Improved Tubularized Preputial/Penile Skin Flap Urethroplasty for Obliterated Anterior Urethral Stricture: Long-Term Results.

PubMed

Xue, Jing-Dong; Xie, Hong; Fu, Qiang; Feng, Chao; Guo, Hui; Xu, Yue-Min

2016-01-01

To present an improved tubularized flap (ITF) technique and report the outcome of single-stage urethroplasty using preputial/penile skin flaps (PSFs) for the treatment of obliterative anterior urethral strictures (AUSs). From January 2000 to June 2012, 42 cases of obliterative AUS (3-14 cm, mean 6.38 cm) with urethral plate unsalvageable were treated using PSF-ITF urethroplasty including longitudinal skin flap, circular island flap, L-flap, Q-flap. Patients were divided into 3 groups: pendulous urethral stricture (Group A), bulbar urethral stricture (Group B) and panurethral strictures (Group C). Patients were followed up by uroflowmetry, urethrography and ureteroscope when necessary. The mean follow-up in these patients was 65 months (range 36 months-15 years). The primary success rates at 3-year follow-up were 75, 75 and 60% for Groups A, B and C, respectively. The overall success rates were 85, 83 and 70% with the remedial measure of a single visual internal urethrotomy at 3-year follow-up. A total 60% of the patients in the study completed more than 5 years of follow-up with no additional recurrence. Improved tubularized preputial/PSF urethroplasty with relatively high overall satisfaction is a novel technique for treatment of AUS when there is inadequate urethral plate or obliterative defects. © 2016 S. Karger AG, Basel.

A new approach to simulating collisionless dark matter fluids

NASA Astrophysics Data System (ADS)

Hahn, Oliver; Abel, Tom; Kaehler, Ralf

2013-09-01

Recently, we have shown how current cosmological N-body codes already follow the fine grained phase-space information of the dark matter fluid. Using a tetrahedral tessellation of the three-dimensional manifold that describes perfectly cold fluids in six-dimensional phase space, the phase-space distribution function can be followed throughout the simulation. This allows one to project the distribution function into configuration space to obtain highly accurate densities, velocities and velocity dispersions. Here, we exploit this technique to show first steps on how to devise an improved particle-mesh technique. At its heart, the new method thus relies on a piecewise linear approximation of the phase-space distribution function rather than the usual particle discretization. We use pseudo-particles that approximate the masses of the tetrahedral cells up to quadrupolar order as the locations for cloud-in-cell (CIC) deposit instead of the particle locations themselves as in standard CIC deposit. We demonstrate that this modification already gives much improved stability and more accurate dynamics of the collisionless dark matter fluid at high force and low mass resolution. We demonstrate the validity and advantages of this method with various test problems as well as hot/warm dark matter simulations which have been known to exhibit artificial fragmentation. This completely unphysical behaviour is much reduced in the new approach. The current limitations of our approach are discussed in detail and future improvements are outlined.

Adaptive Biasing Combined with Hamiltonian Replica Exchange to Improve Umbrella Sampling Free Energy Simulations.

PubMed

Zeller, Fabian; Zacharias, Martin

2014-02-11

The accurate calculation of potentials of mean force for ligand-receptor binding is one of the most important applications of molecular simulation techniques. Typically, the separation distance between ligand and receptor is chosen as a reaction coordinate along which a PMF can be calculated with the aid of umbrella sampling (US) techniques. In addition, restraints can be applied on the relative position and orientation of the partner molecules to reduce accessible phase space. An approach combining such phase space reduction with flattening of the free energy landscape and configurational exchanges has been developed, which significantly improves the convergence of PMF calculations in comparison with standard umbrella sampling. The free energy surface along the reaction coordinate is smoothened by iteratively adapting biasing potentials corresponding to previously calculated PMFs. Configurations are allowed to exchange between the umbrella simulation windows via the Hamiltonian replica exchange method. The application to a DNA molecule in complex with a minor groove binding ligand indicates significantly improved convergence and complete reversibility of the sampling along the pathway. The calculated binding free energy is in excellent agreement with experimental results. In contrast, the application of standard US resulted in large differences between PMFs calculated for association and dissociation pathways. The approach could be a useful alternative to standard US for computational studies on biomolecular recognition processes.

Fixation of revision implants is improved by a surgical technique to crack the sclerotic bone rim.

PubMed

Kold, Søren; Bechtold, Joan E; Mouzin, Olivier; Elmengaard, Brian; Chen, Xinqian; Søballe, Kjeld

2005-03-01

Revision joint replacement has poorer outcomes compared with primary joint replacement, and these poor outcomes have been associated with poorer fixation. We investigated a surgical technique done during the revision operation to improve access from the marrow space to the implant interface by locally cracking the sclerotic bone rim that forms during aseptic loosening. Sixteen implants were inserted bilaterally by distal femur articulation of the knee joint of eight dogs, using our controlled experimental model that replicates the revision setting (sclerotic bone rim, dense fibrous tissue, macrophages, elevated cytokines) by pistoning a loaded 6.0-mm implant 500 microm into the distal femur with particulate PE. At 8 weeks, one of two revision procedures was done. Both revision procedures included complete removal of the membrane, scraping, lavaging, and inserting a revision plasma-spray Ti implant. The crack revision procedure also used a splined tool to circumferentially locally perforate the sclerotic bone rim before insertion of an identical revision implant. Superior fixation was achieved with the cracking procedure in this experimental model. Revision implants inserted with the rim cracking procedure had a significantly higher pushout strength (fivefold median increase) and energy to failure (sixfold median increase), compared with the control revision procedure. Additional evaluation is needed of local perforation of sclerotic bone rim as a simple bone-sparing means to improve revision implant fixation and thereby increase revision implant longevity.

New modified technique of osteotomy for hallux valgus.

PubMed

Oh, I S; Kim, M K; Lee, S H

2004-12-01

To improve the technique of osteotomy for hallux valgus (bunion). 38 cases of a new modified osteotomy procedure for hallux valgus were performed for 22 patients (21 women and one man). During a 3-year (range, 2-5 years) follow-up, the patients underwent physical examination; and their American Orthopedic Foot and Ankle Society hallux-metatarso-phalangeal-interphalangeal scale scores and standard foot radiographic measurements were recorded. 20 of the 22 patients (38 cases) had no pain, achieved good cosmesis, and were completely satisfied with the results of the operation. The remaining 2 patients had occasional mild discomfort. The mean hallux-metatarso-phalangeal-interphalangeal scale score was 93 points (range, 78-100 points). The mean preoperative and postoperative metatarsophalangeal angles were 34 degrees and 11 degrees, respectively. The mean postoperative reduction of the intermetatarsal angle and metatarsophalangeal angle were 6 degrees and 23 degrees, respectively. The new technique of osteotomy achieved even greater stability and accurate correction of the deformity in our 38 cases. Furthermore, it was more effective than conventional 'chevron' osteotomy in terms of correction of the deformity. Therefore, it should be used more widely.

Curative embolization of pediatric intracranial arteriovenous malformations using Onyx: the role of new embolization techniques on patient outcomes.

PubMed

de Castro-Afonso, L H; Nakiri, G S; Oliveira, R S; Santos, M V; Santos, A C Dos; Machado, H R; Abud, D G

2016-06-01

Intracranial arteriovenous malformations (AVMs) are the most frequent cause of hemorrhagic strokes in the pediatric population. The study aim was to retrospectively assess the safety and efficacy of Onyx embolization with the intention to cure AVMs in a pediatric population. A retrospective analysis of all patients (<18 years) who underwent endovascular embolization using Onyx at our institution was conducted. The primary endpoint was the composite complete angiographic occlusion of AVM immediately after the last embolization session that had no procedure-related complication requiring emergency surgery. Secondary endpoints were angiographic occlusion rates, procedure-related complications, and clinical outcomes after treatment and at the 6-month follow-up Twenty-three patients (mean age, 11.7 years) underwent a total of 45 embolization sessions. The median Spetzler-Martin grade was 3 (range 1 to 4). The primary endpoint was achieved in 19 patients (82.6 %). Complete angiographic occlusion of the AVM was obtained in 21 patients (91.3 %) immediately after embolization and at the 6-month follow-up. Embolization-related complications were observed in three patients (13 %). None of the complications resulted in permanent functional disability or death. In two patients (8.7 %), the AVM could not be completely occluded by embolization alone and the patients were referred to radiosurgery and microsurgery, respectively. Onyx embolization of AVM in pediatric patients with the intention to cure resulted in high occlusion rates without increasing neurological disability or death. The development of new embolization techniques and devices seems to improve the safety of Onyx embolization.

Failure of a gas well to respond to a foam hydraulic fracturing treatment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rauscher, B.D.

1996-12-31

Well No. 1 (not the real name of the well) is not producing gas at maximum capacity following a foam hydraulic fracturing treatment performed upon completion of the well in 1987. The failure of the stimulation treatment, which has affected other wells throughout the field, was due to a combination of three factors: (1) downward fracture growth and proppant settling during injection (2) embedment due to a high pressure drawdown in the wellbore during flowback procedures, and (3) poor cleanup of the fracture fluid due to high capillary pressures. The following are recommendations to help improve future fracturing treatments throughoutmore » the field: (1) Fracture at lower treating pressures; (2) Improve perforating techniques; (3) Change flowback procedures; and (4) Evaluate using N{sub 2} as a fracture fluid.« less

[Progress in diagnosis and treatment of adrenal metastases tumor].

PubMed

Wu, Chu-jun; Qiu, Min; Ma, Lu-lin

2015-08-18

The adrenal gland is a common site of metastases, only second to pulmonary, liver and bone. The prevalence of adrenal metastases in patients with a history of cancer is between 10%-25%.The most common sites of origin are cancers of the lung, kidney, breast, gastrointestinal tract, and skin (melanoma).The mainstays of adrenal metastases diagnosis are computerized tomogramphy (CT), magnetic resonance imaging (MRI), and positron emission tomogramphy (PET). All patients should undergo complete hormonal evaluation to rule out functional adrenal tumors. Adrenal biopsy should be reserved for cases in which the results of non-invasive techniques are equivocal. In patients with isolated adrenal metastases, adrenalectomy is recommended, because of improved overall survival. For the patient with unresectable adrenal metastases tumor, radiotherapy and ablative therapy are feasible and useful methods for controlling adrenal metastases and offer patients opportunities for improved survival.

Improved sonic-box computer program for calculating transonic aerodynamic loads on oscillating wings with thickness

NASA Technical Reports Server (NTRS)

Ruo, S. Y.

1978-01-01

A computer program was developed to account approximately for the effects of finite wing thickness in transonic potential flow over an oscillation wing of finite span. The program is based on the original sonic box computer program for planar wing which was extended to account for the effect of wing thickness. Computational efficiency and accuracy were improved and swept trailing edges were accounted for. Account for the nonuniform flow caused by finite thickness was made by application of the local linearization concept with appropriate coordinate transformation. A brief description of each computer routine and the applications of cubic spline and spline surface data fitting techniques used in the program are given, and the method of input was shown in detail. Sample calculations as well as a complete listing of the computer program listing are presented.

Microsurgery within reconstructive surgery of extremities.

PubMed

Pheradze, I; Pheradze, T; Tsilosani, G; Goginashvili, Z; Mosiava, T

2006-05-01

Reconstructive surgery of extremities is an object of a special attention of surgeons. Vessel and nerve damages, deficiency of soft tissue, bone, associated with infection results in a complete loss of extremity function, it also raises a question of amputation. The goal of the study was to improve the role of microsurgery in reconstructive surgery of limbs. We operated on 294 patients with various diseases and damages of extremities: pathology of nerves, vessels, tissue loss. An original method of treatment of large simultaneous functional defects of limbs has been used. Good functional and aesthetic results were obtained. Results of reconstructive operations on extremities might be improved by using of microsurgery methods. Microsurgery is deemed as a method of choice for extremities' reconstructive surgery as far as outcomes achieved through application of microsurgical technique significantly surpass the outcomes obtained through the use of routine surgical methods.

Improving Lunar Exploration with Robotic Follow-up

NASA Technical Reports Server (NTRS)

Fong, T.; Bualat, M.; Deans, M.; Heggy E.; Helper, M.; Hodges, K.; Lee, P.

2011-01-01

We are investigating how augmenting human field work with subsequent robot activity can improve lunar exploration. Robotic "follow-up" might involve: completing geology observations; making tedious or long-duration measurements of a target site or feature; curating samples in-situ; and performing unskilled, labor-intensive work. To study this technique, we have begun conducting a series of lunar analog field tests at Haughton Crater (Canada). Motivation: In most field geology studies on Earth, explorers often find themselves left with a set of observations they would have liked to make, or samples they would have liked to take, if only they had been able to stay longer in the field. For planetary field geology, we can imagine mobile robots - perhaps teleoperated vehicles previously used for manned exploration or dedicated planetary rovers - being deployed to perform such follow-up activities [1].

Enthusiasm for homework and improvement of psychological distress in subthreshold depression during behavior therapy: secondary analysis of data from a randomized controlled trial.

PubMed

Hayasaka, Y; Furukawa, T A; Sozu, T; Imai, H; Kawakami, N; Horikoshi, M

2015-11-25

Cognitive behavioral therapy (CBT) usually involves homework, the completion of which is a known predictor of a positive outcome. The aim of the present study was to examine the session-by-session relationships between enthusiasm to complete the homework and the improvement of psychological distress in depressed people through the course of therapy. Working people with subthreshold depression were recruited to participate in the telephone CBT (tCBT) program with demonstrated effectiveness. Their enthusiasm for homework was enhanced with motivational interviewing techniques and was measured by asking two questions: "How strongly do you feel you want to do this homework?" and "How confident do you feel you can actually accomplish this homework?" at the end of each session. The outcome was the K6 score, which was administered at the start of each session. The K6 is an index of psychological distress including depression and anxiety. We used structural equation modeling (SEM) to elucidate the relationships between enthusiasm and the K6 scores from session to session. The best fitting model suggested that, throughout the course of behavior therapy (BT), enthusiasm to complete the homework was negatively correlated with the K6 scores for the subsequent session, while the K6 score measured at the beginning of the session did not influence the enthusiasm to complete the homeworks assigned for that session. Empirical data now support the practitioners of BT when they try to enhance their patient's enthusiasm for homework regardless of the participant's distress, which then would lead to a reduction in distress in the subsequent week. ClinicalTrials.gov NCT00885014 . April 20, 2009.

Problem solving for depressed suicide attempters and depressed individuals without suicide attempt.

PubMed

Roskar, Saska; Zorko, Maja; Bucik, Valentin; Marusic, Andrej

2007-12-01

Next to feelings of hopelessness, certain cognitive features such as problem solving deficiency, attentional bias and reduced future positive thinking are involved in the development and maintenance of suicidal behavior. The aim of this study was to examine feelings of hopelessness and problem solving ability in depressed suicide attempters and depressed individuals without a suicide attempt and to see whether these features change over time. Three groups of participants, depressed suicide attempters (N=23), psychiatric control group (N=27) and healthy volunteers (N=27) completed measures of hopelessness and executive planning and problem solving abilities. The two clinical groups completed all measures shortly after admission and then again 7 weeks later whereas the non-clinical control group completed measures at baseline only. Both clinical groups displayed a higher level of hopelessness and poorer problem solving ability when compared to non-clinical volunteers. However, no differences were found between the two clinical groups. In neither of the clinical groups was improvement in problem solving ability between baseline and retesting observed despite the lowering of feelings of hopelessness. The diagnoses in the psychiatric controls group were only obtained by the psychiatrist and not checked by further documentation or questionnaires. Furthermore we did not control for personality traits which might influence cognitive functioning. Since feelings of hopelessness decreased over time and problem solving ability nevertheless remained stable it is important that treatment not only focuses on mood improvement of depressed suicidal and depressed non-suicidal individuals but also on teaching problem solving techniques.

'teen Mental Health First Aid': a description of the program and an initial evaluation.

PubMed

Hart, Laura M; Mason, Robert J; Kelly, Claire M; Cvetkovski, Stefan; Jorm, Anthony F

2016-01-01

Many adolescents have poor mental health literacy, stigmatising attitudes towards people with mental illness, and lack skills in providing optimal Mental Health First Aid to peers. These could be improved with training to facilitate better social support and increase appropriate help-seeking among adolescents with emerging mental health problems. teen Mental Health First Aid (teen MHFA), a new initiative of Mental Health First Aid International, is a 3 × 75 min classroom based training program for students aged 15-18 years. An uncontrolled pilot of the teen MHFA course was undertaken to examine the feasibility of providing the program in Australian secondary schools, to test relevant measures of student knowledge, attitudes and behaviours, and to provide initial evidence of program effects. Across four schools, 988 students received the teen MHFA program. 520 students with a mean age of 16 years completed the baseline questionnaire, 345 completed the post-test and 241 completed the three-month follow-up. Statistically significant improvements were found in mental health literacy, confidence in providing Mental Health First Aid to a peer, help-seeking intentions and student mental health, while stigmatising attitudes significantly reduced. teen MHFA appears to be an effective and feasible program for training high school students in Mental Health First Aid techniques. Further research is required with a randomized controlled design to elucidate the causal role of the program in the changes observed.

Surgical technique for reconstruction of the nasal septum: the pericranial flap.

PubMed

Paloma, V; Samper, A; Cervera-Paz, F J

2000-01-01

We describe a new technique for the surgical reconstruction of large-sized anterior septal perforations based on the pericranial flap. The technique requires a standard open rhinoplasty combined with a pericranial flap harvested after a bicoronal approach and tunnelled to the nasal cavity. We present the case of a man with complete destruction of the nasal septum as a result of chronic cocaine abuse. Surgery resulted in a permanent and complete closure of the perforation. The main advantage of this technique is the use of well-vascularized autogenous tissue and the minimal donor site morbidity. This technique provides a new method to close large nasal perforations. Copyright 2000 John Wiley & Sons, Inc. Head Neck 22: 90-94, 2000.

Hardware Implementation of Multiple Fan Beam Projection Technique in Optical Fibre Process Tomography

PubMed Central

Rahim, Ruzairi Abdul; Fazalul Rahiman, Mohd Hafiz; Leong, Lai Chen; Chan, Kok San; Pang, Jon Fea

2008-01-01

The main objective of this project is to implement the multiple fan beam projection technique using optical fibre sensors with the aim to achieve a high data acquisition rate. Multiple fan beam projection technique here is defined as allowing more than one emitter to transmit light at the same time using the switch-mode fan beam method. For the thirty-two pairs of sensors used, the 2-projection technique and 4-projection technique are being investigated. Sixteen sets of projections will complete one frame of light emission for the 2-projection technique while eight sets of projection will complete one frame of light emission for the 4-projection technique. In order to facilitate data acquisition process, PIC microcontroller and the sample and hold circuit are being used. This paper summarizes the hardware configuration and design for this project. PMID:27879885

Diamond knife-assisted deep anterior lamellar keratoplasty to manage keratoconus.

PubMed

Vajpayee, Rasik B; Maharana, Prafulla K; Sharma, Namrata; Agarwal, Tushar; Jhanji, Vishal

2014-02-01

To evaluate the outcomes of a new surgical technique, diamond knife-assisted deep anterior lamellar keratoplasty (DALK), and compare its visual and refractive results with big-bubble DALK in cases of keratoconus. Tertiary eyecare hospital. Comparative case series. The visual and surgical outcomes of diamond knife-assisted DALK were compared with those of successful big-bubble DALK. Diamond knife-assisted DALK was performed in 19 eyes and big-bubble DALK, in 11 eyes. All surgeries were completed successfully. No intraoperative or postoperative complications occurred with diamond knife-assisted DALK. Six months after diamond knife-assisted DALK, the mean corrected distance visual acuity (CDVA) improved significantly from 1.87 logMAR ± 0.22 (SD) to 0.23 ± 0.06 logMAR, the mean keratometry improved from 65.99 ± 8.86 diopters (D) to 45.13 ± 1.16 D, and the mean keratometric cylinder improved from 7.99 ± 3.81 D to 2.87 ± 0.59 D (all P=.005). Postoperatively, the mean refractive astigmatism was 2.55 ± 0.49 D and the mean spherical equivalent was -1.97 ± 0.56 D. The mean logMAR CDVA (P = .06), postoperative keratometry (P=.64), refractive cylinder (P=.63), and endothelial cell loss (P=.11) were comparable between diamond knife-assisted DALK and big-bubble DALK. Diamond knife-assisted DALK was effective and predictable as a surgical technique for management of keratoconus cases. This technique has the potential to offer visual and refractive outcomes comparable to those of big-bubble DALK. No author has a financial or proprietary interest in any material or method mentioned. Copyright © 2013 ASCRS and ESCRS. Published by Elsevier Inc. All rights reserved.

Early complications, pain, and quality of life after reconstructive surgery for abdominal rectus muscle diastasis: a 3-month follow-up.

PubMed

Emanuelsson, P; Gunnarsson, U; Strigård, K; Stark, B

2014-08-01

The aim of this study was to evaluate early complications following retromuscular mesh repair with those after dual layer suture of the anterior rectus sheath in a randomised controlled clinical trial for abdominal rectus muscle diastasis (ARD). Patients with an ARD wider than 3 cm and clinical symptoms related to the ARD were included in a prospective randomised study. They were assigned to either retromuscular inset of a lightweight polypropylene mesh or to dual closure of the anterior rectus fascia using Quill self-locking technology. All patients completed a validated questionnaire for pain assessment (Ventral Hernia Pain Questionnaire, VHPQ) and for quality of life (SF36) prior to and 3 months after surgery. The most frequently seen adverse event was minor wound infection. Of the patients, 14/57 had a superficial wound infection; five related to Quill and nine to mesh repair. No deep wound infections were reported. Patient rating for subjective muscular improvement postoperatively was better in the mesh technique group with a mean of 6.9 (range 0-10) compared to a mean of 4.8 (range 0-10) in the Quill group (p=0.01). The pre- and post-operative SF36 scores improved in both groups. There was no significant difference between the two surgical techniques in terms of early complications and perceived pain at the 3-month follow-up. Both techniques may be considered equally reliable for ARD repair in terms of adverse outcomes during the early postoperative phase, even though patients operated with a mesh experienced better improvement in muscular strength. ClinicalTrial.gov: 2009/227-31/3/PE/96. Copyright © 2014 British Association of Plastic, Reconstructive and Aesthetic Surgeons. Published by Elsevier Ltd. All rights reserved.

Current status of device-assisted enteroscopy: Technical matters, indication, limits and complications

PubMed Central

Riccioni, Maria Elena; Urgesi, Riccardo; Cianci, Rossella; Bizzotto, Alessandra; Galasso, Domenico; Costamagna, Guido

2012-01-01

Enteroscopy, defined as direct visualization of the small bowel with the use of a fiberoptic or capsule endoscopy, has progressed considerably over the past several years. The need for endoscopic access to improve diagnosis and treatment of small bowel disease has led to the development of novel technologies one of which is non-invasive, the video capsule, and a type of invasive technique, the device-assisted enteroscopy. In particular, the device-assisted enteroscopy consists then of three different types of instruments all able to allow, in skilled hands, to display partially or throughout its extension (if necessary) the small intestine. Newer devices, double balloon, single balloon and spiral endoscopy, are just entering clinical use. The aim of this article is to review recent advances in small bowel enteroscopy, focusing on indications, modifications to improve imaging and techniques, pitfalls, and clinical applications of the new instruments. With new technologies, the trials and tribulations of learning new endoscopic skills and determining their role in the diagnosis and treatment of small bowel disease come. Identification of small bowel lesions has dramatically improved. Studies are underway to determine the best strategy to apply new enteroscopy technologies for the diagnosis and management of small bowel disease, particularly obscure bleeding. Vascular malformations such as angiectasis and small bowel neoplasms as adenocarcinoma or gastrointestinal stromal tumors. Complete enteroscopy of the small bowel is now possible. However, because of the length of the small bowel, endoscopic examination and therapeutic maneuvers require significant skill, radiological assistance, the use of deep sedation with the assistance of the anesthetist. Prospective randomized studies are needed to guide diagnostic testing and therapy with these new endoscopic techniques. PMID:23189216

Multidimensional deconvolution of optical microscope and ultrasound imaging using adaptive least-mean-square (LMS) inverse filtering

NASA Astrophysics Data System (ADS)

Sapia, Mark Angelo

2000-11-01

Three-dimensional microscope images typically suffer from reduced resolution due to the effects of convolution, optical aberrations and out-of-focus blurring. Two- dimensional ultrasound images are also degraded by convolutional bluffing and various sources of noise. Speckle noise is a major problem in ultrasound images. In microscopy and ultrasound, various methods of digital filtering have been used to improve image quality. Several methods of deconvolution filtering have been used to improve resolution by reversing the convolutional effects, many of which are based on regularization techniques and non-linear constraints. The technique discussed here is a unique linear filter for deconvolving 3D fluorescence microscopy or 2D ultrasound images. The process is to solve for the filter completely in the spatial-domain using an adaptive algorithm to converge to an optimum solution for de-blurring and resolution improvement. There are two key advantages of using an adaptive solution: (1)it efficiently solves for the filter coefficients by taking into account all sources of noise and degraded resolution at the same time, and (2)achieves near-perfect convergence to the ideal linear deconvolution filter. This linear adaptive technique has other advantages such as avoiding artifacts of frequency-domain transformations and concurrent adaptation to suppress noise. Ultimately, this approach results in better signal-to-noise characteristics with virtually no edge-ringing. Many researchers have not adopted linear techniques because of poor convergence, noise instability and negative valued data in the results. The methods presented here overcome many of these well-documented disadvantages and provide results that clearly out-perform other linear methods and may also out-perform regularization and constrained algorithms. In particular, the adaptive solution is most responsible for overcoming the poor performance associated with linear techniques. This linear adaptive approach to deconvolution is demonstrated with results of restoring blurred phantoms for both microscopy and ultrasound and restoring 3D microscope images of biological cells and 2D ultrasound images of human subjects (courtesy of General Electric and Diasonics, Inc.).

The efficacy of Sustained Natural Apophyseal Glides with and without Isometric Exercise Training in Non-specific Neck Pain.

PubMed

Ali, Abid; Shakil-Ur-Rehman, Syed; Sibtain, Fozia

2014-07-01

To determine the efficacy of Sustained Natural Apophyseal Glides (SNAGs) with and without Isometric Exercise Training Program (IETP) in Non-specific Neck Pain (NSNP) Methods: This randomized control trial of one year duration was conducted at out-patient department of Physiotherapy and Rehabilitation, Khyber Teaching Hospital (KTH) Peshawar, Pakistan from July 2012 to June 2013. The sample of 102 patients of NSNP were randomly selected through simple random sampling technique, and placed into two groups. The SNAGs manual physical therapy technique with IETP was applied on 51 patients in group A and SNAGs manual physical therapy techniques was applied alone on 51 patients in group B. The duration of intervention was 6 weeks, at 4 times per week. The Neck Disability Index (NDI) and Visual Analog Scale (VAS) for neck pain were assessment tools used for all patients before and after 6 weeks of physical therapy intervention. All the patients were assessed through NDI and VAS before intervention and at the completion of 6 weeks program. The data of all 102 was analyzed by SPSS-20 and statistical test was applied at 95% level of significance determine the efficacy of both the treatments interventions and compare with each other. The patients in group A, treated with SNAGs and followed by IETP for 6 weeks, demonstrated more improvement in pain and physical activity as assessed by VAS (p=0.013) and NDI (p=0.003), as compared to the patients treated with SNAGS alone, as pain and function assessed by VAS (p=0.047) and NDI (p=0.164). In group A the NDI score improved from 40 to 15 and VAS from 7 to 4, while in group B the NDI score improved from 42 to 30 and VAS from 7 to 4. Patients with non-specific neck pain treated with SNAGs manual physical therapy techniques and followed by IETP was more effective in reduction of pain and enhancement of function, as compared to those patients treated with SNAGs manual physical therapy techniques alone.

Establishment of metrological traceability in porosity measurements by x-ray computed tomography

NASA Astrophysics Data System (ADS)

Hermanek, Petr; Carmignato, Simone

2017-09-01

Internal porosity is an inherent phenomenon to many manufacturing processes, such as casting, additive manufacturing, and others. Since these defects cannot be completely avoided by improving production processes, it is important to have a reliable method to detect and evaluate them accurately. The accurate evaluation becomes even more important concerning current industrial trends to minimize size and weight of products on one side, and enhance their complexity and performance on the other. X-ray computed tomography (CT) has emerged as a promising instrument for holistic porosity measurements offering several advantages over equivalent methods already established in the detection of internal defects. The main shortcomings of the conventional techniques pertain to too general information about total porosity content (e.g. Archimedes method) or the destructive way of testing (e.g. microscopy of cross-sections). On the contrary, CT is a nondestructive technique providing complete information about size, shape and distribution of internal porosity. However, due to the lack of international standards and the fact that it is relatively a new measurement technique, CT as a measurement technology has not yet reached maturity. This study proposes a procedure for the establishment of measurement traceability in porosity measurements by CT including the necessary evaluation of measurement uncertainty. The traceability transfer is carried out through a novel reference standard calibrated by optical and tactile coordinate measuring systems. The measurement uncertainty is calculated following international standards and guidelines. In addition, the accuracy of porosity measurements by CT with the associated measurement uncertainty is evaluated using the reference standard.

Comparison Between Laser Scanning and Automated 3d Modelling Techniques to Reconstruct Complex and Extensive Cultural Heritage Areas

NASA Astrophysics Data System (ADS)

Fassi, F.; Fregonese, L.; Ackermann, S.; De Troia, V.

2013-02-01

In Cultural Heritage field, the necessity to survey objects in a fast manner, with the ability to repeat the measurements several times for deformation or degradation monitoring purposes, is increasing. In this paper, two significant cases, an architectonical one and an archaeological one, are presented. Due to different reasons and emergency situations, the finding of the optimal solution to enable quick and well-timed survey for a complete digital reconstruction of the object is required. In both cases, two survey methods have been tested and used: a laser scanning approach that allows to obtain high-resolution and complete scans within a short time and a photogrammetric one that allows the three-dimensional reconstruction of the object from images. In the last months, several methodologies, including free or low cost techniques, have arisen. These kinds of software allow the fully automatically three-dimensional reconstruction of objects from images, giving back a dense point cloud and, in some case, a surfaced mesh model. In this paper some comparisons between the two methodologies above mentioned are presented, using the example of some real cases of study. The surveys have been performed by employing both photogrammetry and laser scanner techniques. The methodological operational choices, depending on the required goal, the difficulties encountered during the survey with these methods, the execution time (that is the key parameter), and finally the obtained results, are fully described and examinated. On the final 3D model, an analytical comparison has been made, to analyse the differences, the tolerances, the possibility of accuracy improvement and the future developments.

A simplified method to reduce prosthetic misfit for a screw-retained, implant-supported complete denture using a luting technique and laser welding.

PubMed

Longoni, Salvatore; Sartori, Matteo; Davide, Roberto

2004-06-01

An important aim of implant-supported prostheses is to achieve a passive fit of the framework with the abutments to limit the amount of stress transfer to the bone-implant interface. An efficient and standardized technique is proposed. A definitive screw-retained, implant-supported complete denture was fabricated for an immediately loaded provisional screw-retained implant-supported complete denture. Precise fit was achieved by the use of industrial titanium components and the passivity, by an intraoral luting sequence and laser welding.

Soot and Radiation Measurements in Microgravity Jet Diffusion Flames

NASA Technical Reports Server (NTRS)

Ku, Jerry C.

1996-01-01

The subject of soot formation and radiation heat transfer in microgravity jet diffusion flames is important not only for the understanding of fundamental transport processes involved but also for providing findings relevant to spacecraft fire safety and soot emissions and radiant heat loads of combustors used in air-breathing propulsion systems. Our objectives are to measure and model soot volume fraction, temperature, and radiative heat fluxes in microgravity jet diffusion flames. For this four-year project, we have successfully completed three tasks, which have resulted in new research methodologies and original results. First is the implementation of a thermophoretic soot sampling technique for measuring particle size and aggregate morphology in drop-tower and other reduced gravity experiments. In those laminar flames studied, we found that microgravity soot aggregates typically consist of more primary particles and primary particles are larger in size than those under normal gravity. Comparisons based on data obtained from limited samples show that the soot aggregate's fractal dimension varies within +/- 20% of its typical value of 1.75, with no clear trends between normal and reduced gravity conditions. Second is the development and implementation of a new imaging absorption technique. By properly expanding and spatially-filtering the laser beam to image the flame absorption on a CCD camera and applying numerical smoothing procedures, this technique is capable of measuring instantaneous full-field soot volume fractions. Results from this technique have shown the significant differences in local soot volume fraction, smoking point, and flame shape between normal and reduced gravity flames. We observed that some laminar flames become open-tipped and smoking under microgravity. The third task we completed is the development of a computer program which integrates and couples flame structure, soot formation, and flame radiation analyses together. We found good agreements between model predictions and experimental data for laminar and turbulent flames under both normal and reduced gravity. We have also tested in the laboratory the techniques of rapid-insertion fine-wire thermocouples and emission pyrometry for temperature measurements. These techniques as well as laser Doppler velocimetry and spectral radiative intensity measurement have been proposed to provide valuable data and improve the modeling analyses.

The use of relaxation-mental imagery (self-hypnosis) in the management of 505 pediatric behavioral encounters.

PubMed

Kohen, D P; Olness, K N; Colwell, S O; Heimel, A

1984-02-01

This report assessed outcomes of hypnotherapeutic interventions for 505 children and adolescents seen by four pediatricians over a period of one year and followed from four months to two years. Presenting problems included enuresis, acute pain, chronic pain, asthma, habit disorders, obesity, encopresis, and anxiety. Using strict criteria for determination of problem resolution (e.g., all beds dry) and recognizing that some conditions were intrinsically chronic, the authors found that 51% of these children and adolescents achieved complete resolution of the presenting problem; an additional 32% achieved significant improvement, 9% showed initial or some improvement; and 7% demonstrated no apparent change or improvement. Children as young as three years of age effectively applied self-hypnosis techniques. In general, facility in self-hypnosis increased with age. There was an inverse correlation (p less than 0.001) between clinical success and number of visits, suggesting that prediction of responsivity is possible after four visits or less.

Comprehensive sequence-flux mapping of a levoglucosan utilization pathway in E. coli

DOE PAGES

Klesmith, Justin R.; Bacik, John -Paul; Michalczyk, Ryszard; ...

2015-09-14

Synthetic metabolic pathways often suffer from low specific productivity, and new methods that quickly assess pathway functionality for many thousands of variants are urgently needed. Here we present an approach that enables the rapid and parallel determination of sequence effects on flux for complete gene-encoding sequences. We show that this method can be used to determine the effects of over 8000 single point mutants of a pyrolysis oil catabolic pathway implanted in Escherichia coli. Experimental sequence-function data sets predicted whether fitness-enhancing mutations to the enzyme levoglucosan kinase resulted from enhanced catalytic efficiency or enzyme stability. A structure of one designmore » incorporating 38 mutations elucidated the structural basis of high fitness mutations. One design incorporating 15 beneficial mutations supported a 15-fold improvement in growth rate and greater than 24-fold improvement in enzyme activity relative to the starting pathway. Lastly, this technique can be extended to improve a wide variety of designed pathways.« less

Improved acid tolerance of Lactobacillus pentosus by error-prone whole genome amplification.

PubMed

Ye, Lidan; Zhao, Hua; Li, Zhi; Wu, Jin Chuan

2013-05-01

Acid tolerance of Lactobacillus pentosus ATCC 8041 was improved by error-prone amplification of its genomic DNA using random primers and Taq DNA polymerase. The resulting amplification products were transferred into wild-type L. pentosus by electroporation and the transformants were screened for growth on low-pH agar plates. After only one round of mutation, one mutant (MT3) was identified that was able to completely consume 20 g/L of glucose to produce lactic acid at a yield of 95% in 1L MRS medium at pH 3.8 within 36 h, whereas no growth or lactic acid production was observed for the wild-type strain under the same conditions. The acid tolerance of mutant MT3 remained genetically stable for at least 25 subcultures. Therefore, the error-prone whole genome amplification technique is a very powerful tool for improving phenotypes of this lactic acid bacterium and may also be applicable for other microorganisms. Copyright © 2012 Elsevier Ltd. All rights reserved.

Civil propulsion technology for the next twenty-five years

NASA Technical Reports Server (NTRS)

Rosen, Robert; Facey, John R.

1987-01-01

The next twenty-five years will see major advances in civil propulsion technology that will result in completely new aircraft systems for domestic, international, commuter and high-speed transports. These aircraft will include advanced aerodynamic, structural, and avionic technologies resulting in major new system capabilities and economic improvements. Propulsion technologies will include high-speed turboprops in the near term, very high bypass ratio turbofans, high efficiency small engines and advanced cycles utilizing high temperature materials for high-speed propulsion. Key fundamental enabling technologies include increased temperature capability and advanced design methods. Increased temperature capability will be based on improved composite materials such as metal matrix, intermetallics, ceramics, and carbon/carbon as well as advanced heat transfer techniques. Advanced design methods will make use of advances in internal computational fluid mechanics, reacting flow computation, computational structural mechanics and computational chemistry. The combination of advanced enabling technologies, new propulsion concepts and advanced control approaches will provide major improvements in civil aircraft.

Improved WIMP-search reach of the CDMS II germanium data

DOE PAGES

Agnese, R.

2015-10-12

CDMS II data from the five-tower runs at the Soudan Underground Laboratory were reprocessed with an improved charge-pulse fitting algorithm. Two new analysis techniques to reject surface-event backgrounds were applied to the 612 kg days germanium-detector weakly interacting massive particle (WIMP)-search exposure. An extended analysis was also completed by decreasing the 10 keV analysis threshold to ~5 keV, to increase sensitivity near a WIMP mass of 8 GeV/c 2. After unblinding, there were zero candidate events above a deposited energy of 10 keV and six events in the lower-threshold analysis. This yielded minimum WIMP-nucleon spin-independent scattering cross-section limits of 1.8×10more » –44 and 1.18×10 –41 at 90% confidence for 60 and 8.6 GeV/c 2 WIMPs, respectively. This improves the previous CDMS II result by a factor of 2.4 (2.7) for 60 (8.6) GeV/c 2 WIMPs.« less

Improved WIMP-search reach of the CDMS II germanium data

DOE PAGES

Agnese, R.

2015-10-12

CDMS II data from the five-tower runs at the Soudan Underground Laboratory were reprocessed with an improved charge-pulse fitting algorithm. Two new analysis techniques to reject surface-event backgrounds were applied to the 612 kg days germanium-detector weakly interacting massive particle (WIMP)-search exposure. An extended analysis was also completed by decreasing the 10 keV analysis threshold to ~5 keV, to increase sensitivity near a WIMP mass of 8 GeV/c 2. After unblinding, there were zero candidate events above a deposited energy of 10 keV and six events in the lower-threshold analysis. This yielded minimum WIMP-nucleon spin-independent scattering cross-section limits of 1.8×10more » –44 and 1.18×10 –41 at 90% confidence for 60 and 8.6 GeV/c 2 WIMPs, respectively. Furthermore, this improves the previous CDMS II result by a factor of 2.4 (2.7) for 60 (8.6) GeV/c 2 WIMPs.« less

Analysis of Fringe Field Formed Inside LDA Measurement Volume Using Compact Two Hololens Imaging Systems

NASA Astrophysics Data System (ADS)

Ghosh, Abhijit; Nirala, A. K.; Yadav, H. L.

2018-03-01

We have designed and fabricated four LDA optical setups consisting of aberration compensated four different compact two hololens imaging systems. We have experimentally investigated and realized a hololens recording geometry which is interferogram of converging spherical wavefront with mutually coherent planar wavefront. Proposed real time monitoring and actual fringe field analysis techniques allow complete characterizations of fringes formed at measurement volume and permit to evaluate beam quality, alignment and fringe uniformity with greater precision. After experimentally analyzing the fringes formed at measurement volume by all four imaging systems, it is found that fringes obtained using compact two hololens imaging systems get improved both qualitatively and quantitatively compared to that obtained using conventional imaging system. Results indicate qualitative improvement of non-uniformity in fringe thickness and micro intensity variations perpendicular to the fringes, and quantitative improvement of 39.25% in overall average normalized standard deviations of fringe width formed by compact two hololens imaging systems compare to that of conventional imaging system.

An improved polymeric sponge replication method for biomedical porous titanium scaffolds.

PubMed

Wang, Chunli; Chen, Hongjie; Zhu, Xiangdong; Xiao, Zhanwen; Zhang, Kai; Zhang, Xingdong

2017-01-01

Biomedical porous titanium (Ti) scaffolds were fabricated by an improved polymeric sponge replication method. The unique formulations and distinct processing techniques, i.e. a mixture of water and ethanol as solvent, multiple coatings with different viscosities of the Ti slurries and centrifugation for removing the extra slurries were used in the present study. The optimized porous Ti scaffolds had uniform porous structure and completely interconnected macropores (~365.1μm). In addition, two different sizes of micropores (~45.4 and ~6.2μm) were also formed in the skeleton of the scaffold. The addition of ethanol to the Ti slurry increased the compressive strength of the scaffold by improving the compactness of the skeleton. A compressive strength of 83.6±4.0MPa was achieved for a porous Ti scaffold with a porosity of 66.4±1.8%. Our cellular study also revealed that the scaffolds could support the growth and proliferation of mesenchymal stem cells (MSCs). Copyright © 2016 Elsevier B.V. All rights reserved.

Quality improvement "201": context-relevant quality improvement leadership training for the busy clinician-educator.

PubMed

Stille, Christopher J; Savageau, Judith A; McBride, Jeanne; Alper, Eric J

2012-01-01

Development of quality improvement (QI) skills and leadership for busy clinician-educators in academic medical centers is increasingly necessary, although it is challenging given limited resources. In response, the authors developed the Quality Scholars program for primary care teaching faculty. They conducted a needs assessment, evaluated existing internal and national resources, and developed a 9-month, 20-session project-based curriculum that combines didactic and hands-on techniques with facilitated project discussion. They also conducted pre-post tests of knowledge and attitudes, and evaluations of each session, scholars' projects, and program sustainability and costs. In all, 10 scholars from all 3 generalist disciplines comprised the first class. A wide spectrum of previous experiences enhanced collaboration. QI knowledge increased slightly, and reported self-readiness to lead QI projects increased markedly. Protected time for project work and group discussion of QI topics was seen as essential. All 10 scholars completed projects and presented results. Institutional leadership agreed to sustain the program using institutional funds.

Multiscale wavelet representations for mammographic feature analysis

NASA Astrophysics Data System (ADS)

Laine, Andrew F.; Song, Shuwu

1992-12-01

This paper introduces a novel approach for accomplishing mammographic feature analysis through multiresolution representations. We show that efficient (nonredundant) representations may be identified from digital mammography and used to enhance specific mammographic features within a continuum of scale space. The multiresolution decomposition of wavelet transforms provides a natural hierarchy in which to embed an interactive paradigm for accomplishing scale space feature analysis. Choosing wavelets (or analyzing functions) that are simultaneously localized in both space and frequency, results in a powerful methodology for image analysis. Multiresolution and orientation selectivity, known biological mechanisms in primate vision, are ingrained in wavelet representations and inspire the techniques presented in this paper. Our approach includes local analysis of complete multiscale representations. Mammograms are reconstructed from wavelet coefficients, enhanced by linear, exponential and constant weight functions localized in scale space. By improving the visualization of breast pathology we can improve the changes of early detection of breast cancers (improve quality) while requiring less time to evaluate mammograms for most patients (lower costs).

Functional Outcome and Healing of Large and Massive Rotator Cuff Tears Repaired With a Load-Sharing Rip-Stop Construct.

PubMed

Noyes, Matthew P; Ladermann, Alexandre; Denard, Patrick J

2017-09-01

To prospectively review functional outcomes and healing rates of large and massive rotator cuff tears repaired with a load-sharing rip-stop (LSRS) technique. Twenty-one consecutive patients underwent arthroscopic rotator cuff repair with an LSRS construct between January and December 2014. Seventeen patients with a minimum of 2 years' follow-up were included. Four patients did not complete clinical evaluations and functional outcome scores at a minimum of 2 years' follow-up and were lost to follow-up. Ultrasound imaging was used to assess for rotator cuff healing at a minimum of 6 months postoperatively. Range of motion, strength, and functional outcome scores were evaluated at final follow-up. Mean active forward elevation improved from 109° preoperatively to 153° postoperatively, and mean supraspinatus strength improved by 1 strength grade, from 3.5 preoperatively to 4.4 postoperatively. When we compared preoperative and postoperative values, the American Shoulder and Elbow Surgeons score improved from 40.8 to 89.5, the Single Assessment Numeric Evaluation score improved from 32.8 to 83.1, the Simple Shoulder Test score improved from 3.8 to 10.3, and the pain score on a visual analog scale decreased from 4.8 to 0.8 (P < .001). Of 17 patients, 13 (82%) were satisfied with their outcomes. Ultrasound evaluation 6 months after surgery showed complete healing in 53%, partial healing in 29%, and no healing in 18%. The LSRS construct showed satisfactory functional outcomes with reasonable healing rates in an otherwise challenging subset of rotator cuff tears. This construct may be an alternative for tears not amenable to double-row repair. Level IV, therapeutic case series. Copyright © 2017 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.

Adopting Gayet's Techniques of Totally Laparoscopic Liver Surgery in the United States

PubMed Central

Gumbs, Andrew A.; Gayet, Brice

2013-01-01

Professor Brice Gayet of the Institut Mutualiste Montsouris in Paris, France, has developed totally laparoscopic techniques for all segments of the liver. As a pioneer in the field of minimally invasive hepato-pancreato-biliary surgery, he started a Minimally Invasive Hepato-Pancreato-Biliary Fellowship in 2006. A retrospective review of all hepatic cases performed by a single surgeon since completing this Fellowship was undertaken. From November 2007 to October 2012, a total of 80 liver resections were done, of which 73 were begun with the intention of completing the case laparoscopically. Of these, more than 90% were completed laparoscopically and 88% were for malignant disease. One of the foundations of Professor Gayet's techniques is the low lithotomy or ‘French’ position and the utilization of a small robotically controlled laparoscope holder that is sterilizeable and considerably more economic than complete surgical systems. Prototypes exist of robotically controlled hand-held laparoscopic instruments that, unlike the complete surgical system, enable surgeons to maintain a sense of touch (haptics). Proper training in minimally invasive hepato-pancreato-biliary techniques can be obtained with surgeons able to independently perform laparoscopic major hepatectomies without senior minimally invasive backup. Furthermore, miniature and more affordable robotics may enable more surgeons to enjoy the benefits of minimally invasive surgery while maintaining patient safety and minimizing the rising burden of health-care costs worldwide. PMID:24159591

An evaluation of the Kinect-Ed presentation, a motivating nutrition and cooking intervention for young adolescents in grades 6-8.

PubMed

Santarossa, Sara; Ciccone, Jillian; Woodruff, Sarah J

2015-09-01

Recently, public health messaging has included having more family meals and involving young adolescents (YAs) with meal preparation to improve healthful diets and family dinner frequency (FDF). Kinect-Ed, a motivational nutrition education presentation was created to encourage YAs (grades 6-8) to help with meal preparation and ultimately improve FDF. The purpose of this study was to evaluate the Kinect-Ed presentation, with the goals of the presentation being to improve self-efficacy for cooking (SE), food preparation techniques (TECH), food preparation frequency (PREP), family meal attitudes and behaviours, and ultimately increase FDF. A sample of YAs (n = 219) from Southern Ontario, Canada, completed pre- and postpresentation surveys, measuring FDF, PREP, SE, and TECH. Kinect-Ed successfully improved participants' FDF (p < 0.01), PREP (p < 0.01), SE (p < 0.01), and TECH (<0.01). Overall, goals of the presentation were met. Encouraging YAs to help prepare meals and get involved in the kitchen may reduce the time needed from parents to prepare meals, and, in turn, allow more time for frequent family dinners.

A photometric mode identification method, including an improved non-adiabatic treatment of the atmosphere

NASA Astrophysics Data System (ADS)

Dupret, M.-A.; De Ridder, J.; De Cat, P.; Aerts, C.; Scuflaire, R.; Noels, A.; Thoul, A.

2003-02-01

We present an improved version of the method of photometric mode identification of Heynderickx et al. (\\cite{hey}). Our new version is based on the inclusion of precise non-adiabatic eigenfunctions determined in the outer stellar atmosphere according to the formalism recently proposed by Dupret et al. (\\cite{dup}). Our improved photometric mode identification technique is therefore no longer dependent on ad hoc parameters for the non-adiabatic effects. It contains the complete physical conditions of the outer atmosphere of the star, provided that rotation does not play a key role. We apply our method to the two slowly pulsating B stars HD 74560 and HD 138764 and to the beta Cephei star EN (16) Lac. Besides identifying the degree l of the pulsating stars, our method is also a tool for improving the knowledge of stellar interiors and atmospheres, by imposing constraints on parameters such as the metallicity and the mixing-length parameter alpha (a procedure we label non-adiabatic asteroseismology). The non-adiabatic eigenfunctions needed for the mode identification are available upon request from the authors.

Implementation of Trauma-Informed Care and Brief Solution-Focused Therapy: A Quality Improvement Project Aimed at Increasing Engagement on an Inpatient Psychiatric Unit.

PubMed

Aremu, Babatunde; Hill, Pamela D; McNeal, Joanne M; Petersen, Mary A; Swanberg, Debbie; Delaney, Kathleen R

2018-03-14

Addressing tense and escalating situations with noncoercive measures is an important element of inpatient psychiatric treatment. Although restraint rates are frequently monitored, the use of pro re nata (PRN) intramuscular (IM) injections to address agitation is also an important indicator. In 2015, at the current study site, a significant increase was noted in PRN IM medication use despite unit leadership's efforts to build a culture of trauma-informed care (TIC). The purpose of the current quality improvement project was to educate staff on methods to incorporate TIC into daily practice and the use of brief solution-focused therapy techniques in escalating situations. Measurement of attitudes toward patient aggression and engagement with patients followed two waves of staff education. Upon completion of the project, a decrease in PRN IM medications, improvement in staff attitudes toward patient aggression, and improved sense of staff competency in handling tense situations were noted. [Journal of Psychosocial Nursing and Mental Health Services, xx(x), xx-xx.]. Copyright 2018, SLACK Incorporated.

A Method for Generating Reduced Order Linear Models of Supersonic Inlets

NASA Technical Reports Server (NTRS)

Chicatelli, Amy; Hartley, Tom T.

1997-01-01

For the modeling of high speed propulsion systems, there are at least two major categories of models. One is based on computational fluid dynamics (CFD), and the other is based on design and analysis of control systems. CFD is accurate and gives a complete view of the internal flow field, but it typically has many states and runs much slower dm real-time. Models based on control design typically run near real-time but do not always capture the fundamental dynamics. To provide improved control models, methods are needed that are based on CFD techniques but yield models that are small enough for control analysis and design.

A compact 500 MHz 4 kW Solid-State Power Amplifier for accelerator applications

NASA Astrophysics Data System (ADS)

Gaspar, M.; Pedrozzi, M.; Ferreira, L. F. R.; Garvey, T.

2011-05-01

We present the development of a compact narrow-band Solid-State Power Amplifier (SSPA). We foresee a promising application of solid-state amplifiers specifically in accelerators for new generation synchrotron light sources. Such a new technology has reached a competitive price/performance ratio and expected lifetime in comparison with klystron and IOT amplifiers. The increasing number of synchrotron light sources using 500 MHz as base frequency justifies the effort in the development of the proposed amplifier. Two different techniques are also proposed to improve the control and performance of these new distributed amplification systems which we call, respectively, complete distributed system and forced compression.

Training in Innovative Technologies for Close-Range Sensing in Alpine Terrain

NASA Astrophysics Data System (ADS)

Rutzinger, M.; Bremer, M.; Höfle, B.; Hämmerle, M.; Lindenbergh, R.; Oude Elberink, S.; Pirotti, F.; Scaioni, M.; Wujanz, D.; Zieher, T.

2018-05-01

The 2nd international summer school "Close-range sensing techniques in Alpine terrain" was held in July 2017 in Obergurgl, Austria. Participants were trained in selected close-range sensing methods, such as photogrammetry, laser scanning and thermography. The program included keynotes, lectures and hands-on assignments combining field project planning, data acquisition, processing, quality assessment and interpretation. Close-range sensing was applied for different research questions of environmental monitoring in high mountain environments, such as geomorphologic process quantification, natural hazard management and vegetation mapping. The participants completed an online questionnaire evaluating the summer school, its content and organisation, which helps to improve future summer schools.

NASA Space Engineering Research Center for VLSI systems design

NASA Technical Reports Server (NTRS)

1991-01-01

This annual review reports the center's activities and findings on very large scale integration (VLSI) systems design for 1990, including project status, financial support, publications, the NASA Space Engineering Research Center (SERC) Symposium on VLSI Design, research results, and outreach programs. Processor chips completed or under development are listed. Research results summarized include a design technique to harden complementary metal oxide semiconductors (CMOS) memory circuits against single event upset (SEU); improved circuit design procedures; and advances in computer aided design (CAD), communications, computer architectures, and reliability design. Also described is a high school teacher program that exposes teachers to the fundamentals of digital logic design.

Correlations Between the Contributions of Individual IVS Analysis Centers

NASA Technical Reports Server (NTRS)

Bockmann, Sarah; Artz, Thomas; Nothnagel, Axel

2010-01-01

Within almost all space-geodetic techniques, contributions of different analysis centers (ACs) are combined in order to improve the robustness of the final product. So far, the contributing series are assumed to be independent as each AC processes the observations in different ways. However, the series cannot be completely independent as each analyst uses the same set of original observations and many applied models are subject to conventions used by each AC. In this paper, it is shown that neglecting correlations between the contributing series yields too optimistic formal errors and small, but insignificant, errors in the estimated parameters derived from the adjustment of the combined solution.

Ceramic applications in turbine engines. [for improved component performance and reduced fuel usage

NASA Technical Reports Server (NTRS)

Hudson, M. S.; Janovicz, M. A.; Rockwood, F. A.

1980-01-01

Ceramic material characterization and testing of ceramic nozzle vanes, turbine tip shrouds, and regenerators disks at 36 C above the baseline engine TIT and the design, analysis, fabrication and development activities are described. The design of ceramic components for the next generation engine to be operated at 2070 F was completed. Coupons simulating the critical 2070 F rotor blade was hot spin tested for failure with sufficient margin to quality sintered silicon nitride and sintered silicon carbide, validating both the attachment design and finite element strength. Progress made in increasing strength, minimizing variability, and developing nondestructive evaluation techniques is reported.