The merging of fatigue and fracture mechanics concepts: a historical perspective

NASA Astrophysics Data System (ADS)

Newman, J. C.

1998-07-01

In this review, some of the technical developments that have occurred during the past 40 years are presented which have led to the merger of fatigue and fracture mechanics concepts. This review is made from the viewpoint of “crack propagation”. As methods to observe the “fatigue” process have improved, the formation of fatigue micro-cracks have been observed earlier in life and the measured crack sizes have become smaller. These observations suggest that fatigue damage can now be characterized by “crack size”. In parallel, the crack-growth analysis methods, using stress-intensity factors, have also improved. But the effects of material inhomogeneities, crack-fracture mechanisms, and nonlinear behavior must now be included in these analyses. The discovery of crack-closure mechanisms, such as plasticity, roughness, and oxide/corrosion/fretting product debris, and the use of the effective stress-intensity factor range, has provided an engineering tool to predict small- and large-crack-growth rate behavior under service loading conditions. These mechanisms have also provided a rationale for developing new, damage-tolerant materials. This review suggests that small-crack growth behavior should be viewed as typical behavior, whereas large-crack threshold behavior should be viewed as the anomaly. Small-crack theory has unified “fatigue” and “fracture mechanics” concepts; and has bridged the gap between safe-life and durability/damage-tolerance design concepts.

The ENGAGE study: Integrating neuroimaging, virtual reality and smartphone sensing to understand self-regulation for managing depression and obesity in a precision medicine model.

PubMed

Williams, Leanne M; Pines, Adam; Goldstein-Piekarski, Andrea N; Rosas, Lisa G; Kullar, Monica; Sacchet, Matthew D; Gevaert, Olivier; Bailenson, Jeremy; Lavori, Philip W; Dagum, Paul; Wandell, Brian; Correa, Carlos; Greenleaf, Walter; Suppes, Trisha; Perry, L Michael; Smyth, Joshua M; Lewis, Megan A; Venditti, Elizabeth M; Snowden, Mark; Simmons, Janine M; Ma, Jun

2018-02-01

Precision medicine models for personalizing achieving sustained behavior change are largely outside of current clinical practice. Yet, changing self-regulatory behaviors is fundamental to the self-management of complex lifestyle-related chronic conditions such as depression and obesity - two top contributors to the global burden of disease and disability. To optimize treatments and address these burdens, behavior change and self-regulation must be better understood in relation to their neurobiological underpinnings. Here, we present the conceptual framework and protocol for a novel study, "Engaging self-regulation targets to understand the mechanisms of behavior change and improve mood and weight outcomes (ENGAGE)". The ENGAGE study integrates neuroscience with behavioral science to better understand the self-regulation related mechanisms of behavior change for improving mood and weight outcomes among adults with comorbid depression and obesity. We collect assays of three self-regulation targets (emotion, cognition, and self-reflection) in multiple settings: neuroimaging and behavioral lab-based measures, virtual reality, and passive smartphone sampling. By connecting human neuroscience and behavioral science in this manner within the ENGAGE study, we develop a prototype for elucidating the underlying self-regulation mechanisms of behavior change outcomes and their application in optimizing intervention strategies for multiple chronic diseases. Copyright © 2017. Published by Elsevier Ltd.

Does the Incredible Years reduce child externalizing problems through improved parenting? The role of child negative affectivity and serotonin transporter linked polymorphic region (5-HTTLPR) genotype.

PubMed

Weeland, Joyce; Chhangur, Rabia R; Jaffee, Sara R; Van Der Giessen, Danielle; Matthys, Walter; Orobio De Castro, Bram; Overbeek, Geertjan

2018-02-01

In a randomized controlled trial, the Observational Randomized Controlled Trial of Childhood Differential Susceptibility (ORCHIDS study), we tested whether observed parental affect and observed and reported parenting behavior are mechanisms of change underlying the effects of the behavioral parent training program the Incredible Years (IY). Furthermore, we tested whether some children are more susceptible to these change mechanisms because of their temperamental negative affectivity and/or serotonin transporter linked polymorphic region (5-HTTLPR) genotype. Participants were 387 Dutch children between 4 and 8 years of age (M age = 6.31, SD = 1.33; 55.3% boys) and their parents. Results showed that although IY was successful in improving parenting behavior and increasing parental positive affect, these effects did not explain the significant decreases in child externalizing problems. We therefore found no evidence for changes in parenting behavior or parental affect being the putative mechanisms of IY effectiveness. Furthermore, intervention effects on child externalizing behavior were not moderated by child negative affectivity or 5-HTTLPR genotype. However, child 5-HTTLPR genotype did moderate intervention effects on negative parenting behavior. This suggests that in research on behavioral parent training programs, "what works for which parents" might also be an important question.

Microstructure and mechanical behavior of metallic glass fiber-reinforced Al alloy matrix composites

PubMed Central

Wang, Z.; Georgarakis, K.; Nakayama, K. S.; Li, Y.; Tsarkov, A. A.; Xie, G.; Dudina, D.; Louzguine-Luzgin, D. V.; Yavari, A. R.

2016-01-01

Metallic glass-reinforced metal matrix composites are an emerging class of composite materials. The metallic nature and the high mechanical strength of the reinforcing phase offers unique possibilities for improving the engineering performance of composites. Understanding the structure at the amorphous/crystalline interfaces and the deformation behavior of these composites is of vital importance for their further development and potential application. In the present work, Zr-based metallic glass fibers have been introduced in Al7075 alloy (Al-Zn-Mg-Cu) matrices using spark plasma sintering (SPS) producing composites with low porosity. The addition of metallic glass reinforcements in the Al-based matrix significantly improves the mechanical behavior of the composites in compression. High-resolution TEM observations at the interface reveal the formation of a thin interdiffusion layer able to provide good bonding between the reinforcing phase and the Al-based matrix. The deformation behavior of the composites was studied, indicating that local plastic deformation occurred in the matrix near the glassy reinforcements followed by the initiation and propagation of cracks mainly through the matrix. The reinforcing phase is seen to inhibit the plastic deformation and retard the crack propagation. The findings offer new insights into the mechanical behavior of metal matrix composites reinforced with metallic glasses. PMID:27067824

Parent-child communication processes: preventing children's health-risk behavior.

PubMed

Riesch, Susan K; Anderson, Lori S; Krueger, Heather A

2006-01-01

Review individual, family, and environmental factors that predict health-risk behavior among children and to propose parent-child communication processes as a mechanism to mediate them. Improving parent-child communication processes may: reduce individual risk factors, such as poor academic achievement or self-esteem; modify parenting practices such as providing regulation and structure and acting as models of health behavior; and facilitate discussion about factors that lead to involvement in health-risk behaviors. Assessment strategies to identify youth at risk for health-risk behavior are recommended and community-based strategies to improve communication among parents and children need development.

Assessing the relationship between quality of life and behavioral activation using the Japanese Behavioral Activation for Depression Scale-Short Form.

PubMed

Shudo, Yusuke; Yamamoto, Tatsuya

2017-01-01

Quality of life (QOL) is an important health-related concept. Identifying factors that affect QOL can help develop and improve health-promotion interventions. Previous studies suggest that behavioral activation fosters subjective QOL, including well-being. However, the mechanism by which behavioral activation improves QOL is not clear. Considering that QOL improves when depressive symptoms improve post-treatment and that behavioral activation is an effective treatment for depression, it is possible that behavioral activation affects QOL indirectly rather than directly. To clarify the mechanism of the influence of behavioral activation on QOL, it is necessary to examine the relationships between factors related to behavioral activation, depressive symptoms, and QOL. Therefore, we attempted to examine the relationship between these factors. Participants comprised 221 Japanese undergraduate students who completed questionnaires on behavioral activation, QOL, and depressive symptoms: the Japanese versions of the Behavioral Activation for Depression Scale-Short Form (BADS-SF), WHO Quality of Life-BREF (WHOQOL-26), and Center for Epidemiologic Studies Depression Scale (CES-D). The BADS-SF comprises two subscales, Activation and Avoidance, and the WHOQOL-26 measures overall QOL and four domains, Physical Health, Psychological Health, Social Relationships, and Environment. Mediation analyses were conducted with BADS-SF activation and avoidance as independent variables, CES-D as a mediator variable, and each WHO-QOL as an outcome variable. Results indicated that depression completely mediated the relationship between Avoidance and QOL, and partially mediated the relationship between Activation and QOL. In addition, analyses of each domain of QOL showed that Activation positively affected all aspects of QOL directly and indirectly, but Avoidance had a negative influence on only part of QOL mainly through depression. The present study provides behavioral activation strategies aimed at QOL enhancement.

Mechanism of Change in Cognitive-Behavioral Treatment of Panic Disorder: Evidence for the Fear of Fear Mediational Hypothesis

ERIC Educational Resources Information Center

Smits, Jasper A. J.; Powers, Mark B.; Cho, Yongrae; Telch, Michael J.

2004-01-01

Numerous clinical trials have demonstrated the efficacy of cognitive-behavioral treatment (CBT) for panic disorder. However, studies investigating the mechanisms responsible for improvement with CBT are lacking. The authors used regression analyses outlined by R. M. Baron and D. A. Kenny (1986) to test whether a reduction in fear of fear (FOF)…

A quantum mechanics-based approach to model incident-induced dynamic driver behavior

NASA Astrophysics Data System (ADS)

Sheu, Jiuh-Biing

2008-08-01

A better understanding of the psychological factors influencing drivers, and the resulting driving behavior responding to incident-induced lane traffic phenomena while passing by an incident site is vital to the improvement of road safety. This paper presents a microscopic driver behavior model to explain the dynamics of the instantaneous driver decision process under lane-blocking incidents on adjacent lanes. The proposed conceptual framework decomposes the corresponding driver decision process into three sequential phases: (1) initial stimulus, (2) glancing-around car-following, and (3) incident-induced driving behavior. The theorem of quantum mechanics in optical flows is applied in the first phase to explain the motion-related perceptual phenomena while vehicles approach the incident site in adjacent lanes, followed by the incorporation of the effect of quantum optical flows in modeling the induced glancing-around car-following behavior in the second phase. Then, an incident-induced driving behavior model is formulated to reproduce the dynamics of driver behavior conducted in the process of passing by an incident site in the adjacent lanes. Numerical results of model tests using video-based incident data indicate the validity of the proposed traffic behavior model in analyzing the incident-induced lane traffic phenomena. It is also expected that such a proposed quantum-mechanics based methodology can throw more light if applied to driver psychology and response in anomalous traffic environments in order to improve road safety.

Obesity Reduces Cognitive and Motor Functions across the Lifespan

PubMed Central

Wang, Chuanming; Chan, John S. Y.; Ren, Lijie; Yan, Jin H.

2016-01-01

Due to a sedentary lifestyle, more and more people are becoming obese nowadays. In addition to health-related problems, obesity can also impair cognition and motor performance. Previous results have shown that obesity mainly affects cognition and motor behaviors through altering brain functions and musculoskeletal system, respectively. Many factors, such as insulin/leptin dysregulation and inflammation, mediate the effect of obesity and cognition and motor behaviors. Substantial evidence has suggested exercise to be an effective way to improve obesity and related cognitive and motor dysfunctions. This paper aims to discuss the association of obesity with cognition and motor behaviors and its underlying mechanisms. Following this, mechanisms of exercise to improve obesity-related dysfunctions are described. Finally, implications and future research direction are raised. PMID:26881095

Obesity Reduces Cognitive and Motor Functions across the Lifespan.

PubMed

Wang, Chuanming; Chan, John S Y; Ren, Lijie; Yan, Jin H

2016-01-01

Due to a sedentary lifestyle, more and more people are becoming obese nowadays. In addition to health-related problems, obesity can also impair cognition and motor performance. Previous results have shown that obesity mainly affects cognition and motor behaviors through altering brain functions and musculoskeletal system, respectively. Many factors, such as insulin/leptin dysregulation and inflammation, mediate the effect of obesity and cognition and motor behaviors. Substantial evidence has suggested exercise to be an effective way to improve obesity and related cognitive and motor dysfunctions. This paper aims to discuss the association of obesity with cognition and motor behaviors and its underlying mechanisms. Following this, mechanisms of exercise to improve obesity-related dysfunctions are described. Finally, implications and future research direction are raised.

Mechanical behavior of monocrystalline aluminum-lithium alloy at low temperatures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, Z.G.; Liu, W.; Xu, Y.B.

1994-12-01

Investigations have indicated that at low temperature aluminum- lithium alloys display improved toughness and an improved strength-toughness relationship. The yield strength, ultimate tensile strength, elongation and the fracture toughness increase with decreasing temperatures. Several mechanisms have been proposed to explain this most striking feature. Webster claimed that low melting point impurities, such as sodium and potassium, are responsible for the improvement of mechanical properties in Al-Li alloys at low temperatures. However, Venkateswara Rao et al. indicated that the increased delamination at low temperatures can increase the degree of in-plane crack deflection, resulting in toughening of the alloys. On the basismore » of their own results, Xu and coworker pointed out that the improvement of tensile and fatigue properties at liquid nitrogen temperatures is also presumably attributable to the delamination. Therefore, the mechanisms responsible for the variation in mechanical properties with temperature are not currently well-understood. In order to elucidate the real situation, single crystals of a binary aluminum-lithium alloy were adopted in the present study. This paper is devoted to the description of the behavior of the load-displacement curves and the associated slip traces on the sample surfaces.« less

The PHLAME (Promoting Healthy Lifestyles: Alternative Models' Effects) firefighter study: testing mediating mechanisms.

PubMed

Ranby, Krista W; MacKinnon, David P; Fairchild, Amanda J; Elliot, Diane L; Kuehl, Kerry S; Goldberg, Linn

2011-10-01

This paper examines the mechanisms by which PHLAME (Promoting Healthy Lifestyles: Alternative Models' Effects), a health promotion intervention, improved healthy eating and exercise behavior among firefighters, a population at high risk for health problems due to occupational hazards. In a randomized trial, 397 firefighters participated in either the PHLAME team intervention with their work shift or a control condition. Intervention sessions taught benefits of a healthy diet and regular exercise, and sought to improve social norms and social support from coworkers for healthy behavior. At posttest, team intervention participants had increased their fruit and vegetable consumption as compared to control participants. An increase in knowledge of fruit and vegetable benefits and improved dietary coworker norms partially mediated these effects. Exercise habits and VO2 max were related to targeted mediators but were not significantly changed by the team intervention. Partial support was found for both the action and conceptual theories underlying the intervention. Our findings illustrate how an effective program's process can be deconstructed to understand the underpinnings of behavior change and refine interventions. Further, fire stations may improve the health of firefighters by emphasizing the benefits of healthy diet and exercise behaviors while also encouraging behavior change by coworkers as a whole. (PsycINFO Database Record (c) 2011 APA, all rights reserved).

Modeling and performance improvement of the constant power regulator systems in variable displacement axial piston pump.

PubMed

Park, Sung Hwan; Lee, Ji Min; Kim, Jong Shik

2013-01-01

An irregular performance of a mechanical-type constant power regulator is considered. In order to find the cause of an irregular discharge flow at the cut-off pressure area, modeling and numerical simulations are performed to observe dynamic behavior of internal parts of the constant power regulator system for a swashplate-type axial piston pump. The commercial numerical simulation software AMESim is applied to model the mechanical-type regulator with hydraulic pump and simulate the performance of it. The validity of the simulation model of the constant power regulator system is verified by comparing simulation results with experiments. In order to find the cause of the irregular performance of the mechanical-type constant power regulator system, the behavior of main components such as the spool, sleeve, and counterbalance piston is investigated using computer simulation. The shape modification of the counterbalance piston is proposed to improve the undesirable performance of the mechanical-type constant power regulator. The performance improvement is verified by computer simulation using AMESim software.

Shared mechanisms of perceptual learning and decision making.

PubMed

Law, Chi-Tat; Gold, Joshua I

2010-04-01

Perceptual decisions require the brain to weigh noisy evidence from sensory neurons to form categorical judgments that guide behavior. Here we review behavioral and neurophysiological findings suggesting that at least some forms of perceptual learning do not appear to affect the response properties of neurons that represent the sensory evidence. Instead, improved perceptual performance results from changes in how the sensory evidence is selected and weighed to form the decision. We discuss the implications of this idea for possible sites and mechanisms of training-induced improvements in perceptual processing in the brain. Copyright © 2009 Cognitive Science Society, Inc.

Improvement of mechanical behaviors of a superlight Mg-Li base alloy by duplex phases and fine precipitates

DOE PAGES

Zou, Yun; Zhang, Lehao; Li, Yang; ...

2017-12-06

Limitations of strength and formability are the major obstacles to the industrial application of magnesium alloys. Here, we demonstrate, by producing the duplex phases and fine intermetallic particles in composition-optimized superlight Mg-Li-Al alloys, a unique approach to simultaneously improve the comprehensive mechanical properties (a strength-ductility balance). In conclusion, the phase components and microstructures, including the size, morphology, and distribution of precipitated-intermetallic particles can be optimized by tuning the Li content, which strongly influences the work-hardening behavior and tension-compression yield asymmetry.

Emotion Regulation and Substance Use Frequency in Women with Substance Dependence and Borderline Personality Disorder Receiving Dialectical Behavior Therapy

PubMed Central

Axelrod, Seth R.; Perepletchikova, Francheska; Holtzman, Kevin; Sinha, Rajita

2011-01-01

Background Dialectical Behavior Therapy (DBT) identifies emotion dysregulation as central to the dangerous impulsivity of borderline personality disorder (BPD) including substance use disorders, and DBT targets improved emotion regulation as a primary mechanism of change. However, improved emotion regulation with DBT and associations between such improvement and behavioral outcomes such as substance use has not been previously reported. Objective Thus, the goal of this study was to assess for improvement in emotion regulation and to examine the relationship between improvements in the emotion regulation and substance use problems following DBT treatment. Method Emotion regulation as assessed by the Difficulties in Emotion Regulation Scale, depressed mood as assessed by the Beck Depression Inventory, and their associations with substance use frequency were investigated in 27 women with substance dependence and BPD receiving 20 weeks of DBT in an academic community outpatient substance abuse treatment program. Results indicated improved emotion regulation, improved mood, and decreased substance use frequency. Further, emotion regulation improvement, but not improved mood, explained the variance of decreased substance use frequency. Conclusions This is the first study to demonstrate improved emotion regulation in BPD patients treated with DBT and to show that improved emotion regulation can account for increased behavioral control in BPD patients. Significance and Future Research Emotion regulation assessment is recommended for future studies to further clarify the etiology and maintenance of disorders associated with emotional dyregulation such as BPD and substance dependence, and to further explore emotion regulation as a potential mechanism of change for clinical interventions. PMID:21091162

Improvement of Progressive Damage Model to Predicting Crashworthy Composite Corrugated Plate

NASA Astrophysics Data System (ADS)

Ren, Yiru; Jiang, Hongyong; Ji, Wenyuan; Zhang, Hanyu; Xiang, Jinwu; Yuan, Fuh-Gwo

2018-02-01

To predict the crashworthy composite corrugated plate, different single and stacked shell models are evaluated and compared, and a stacked shell progressive damage model combined with continuum damage mechanics is proposed and investigated. To simulate and predict the failure behavior, both of the intra- and inter- laminar failure behavior are considered. The tiebreak contact method, 1D spot weld element and cohesive element are adopted in stacked shell model, and a surface-based cohesive behavior is used to capture delamination in the proposed model. The impact load and failure behavior of purposed and conventional progressive damage models are demonstrated. Results show that the single shell could simulate the impact load curve without the delamination simulation ability. The general stacked shell model could simulate the interlaminar failure behavior. The improved stacked shell model with continuum damage mechanics and cohesive element not only agree well with the impact load, but also capture the fiber, matrix debonding, and interlaminar failure of composite structure.

Efficiency degradation behaviors of current/thermal co-stressed GaN-based blue light emitting diodes with vertical-structure

NASA Astrophysics Data System (ADS)

Liu, Lilin; Ling, Minjie; Yang, Jianfu; Xiong, Wang; Jia, Weiqing; Wang, Gang

2012-05-01

With this work, we demonstrate a three-stage degradation behavior of GaN based LED chips under current/thermal co-stressing. The three stages in sequence are the initial improvement stage, the platform stage, and the rapid degradation stage, indicating that current/thermal co-stressing activates positive effects and negative ones simultaneously, and the dominant degradation mechanisms evolve with aging time. Degradation mechanisms are discussed. Electric current stress has dual characters: damaging the active layers by generating defects and at the same time improving the p-type conductivity by activating the Mg-dopant. High temperature stresses will promote the effects from electric current stresses. The activation of the Mg-dopant will saturate, whereas the generation of defects is carried on in a progressive way. Other mechanisms, such as deterioration of ohmic contacts, also operate. These mechanisms compete/cooperate with each other and evolve with aging time, resulting in the observed three-stage degradation behavior. There exist risks to predict the lifetime of LEDs by a model with a constant accelerated factor.

Harassment of adults by immatures in bonobos (Pan paniscus): testing the Exploratory Aggression and Rank Improvement hypotheses.

PubMed

Boose, Klaree; White, Frances

2017-10-01

The immatures of many primate species frequently pester adult group members with aggressive behaviors referred to as a type of harassment. Although these behaviors are characteristic of immatures as they develop from infancy through adolescence, there have been few studies that specifically address the adaptive significance of harassment. Two functional hypotheses have been generated from observations of the behavior in chimpanzees. The Exploratory Aggression hypothesis describes harassment as a mechanism used by immatures to learn about the parameters of aggression and dominance behavior and to acquire information about novel, complex, or unpredictable relationships. The Rank Improvement hypothesis describes harassment as a mechanism of dominance acquisition used by immatures to outrank adults. This study investigated harassment of adults by immatures in a group of bonobos housed at the Columbus Zoo and compared the results to the predictions outlined by the Exploratory Aggression and Rank Improvement hypotheses. Although all immature bonobos in this group harassed adults, adolescents performed the behavior more frequently than did infants or juveniles and low-ranking adults were targeted more frequently than high-ranking. Targets responded more with agonistic behaviors than with neutral behaviors and the amount of harassment an individual received was significantly correlated with the amount of agonistic responses given. Furthermore, bouts of harassment were found to continue significantly more frequently when responses were agonistic than when they were neutral. Adolescents elicited mostly agonistic responses from targets whereas infants and juveniles received mostly neutral responses. These results support predictions from each hypothesis where harassment functions both as a mechanism of social exploration and as a tool to establish dominance rank.

Production, characterization, and mechanical behavior of cementitious materials incorporating carbon nanofibers.

DOT National Transportation Integrated Search

2012-08-01

Carbon nanotubes (CNTs) and carbon nanofirbers (CNFs) have excellent properties : (mechanical, electrical, magnetic, etc.), which can make them effective : nanoreinforcements for improving the properties of materials. The incorporation of : CNT/Fs in...

Simplifying study of fever's dramatic relief of autistic behavior.

PubMed

Good, Peter

2017-02-01

Dramatic relief of autistic behavior by infectious fever continues to tantalize parents and practitioners, yet researchers still hesitate to study its physiology/biochemistry, fearing stress and heat of brain imaging, contagion, and fever's complexity. Yet what could be more revealing than a common event that virtually 'normalizes' autistic behavior for a time? This paper proposes study of three simplified scenarios: (1) improvements appearing hours before fever, (2) return of autistic behavior soon after fever, (3) improvements persisting long after fever. Each scenario limits some risk - and some explanation - inviting triangulation of decisive factor(s) in relief and recurrence. Return of autistic behavior after fever may be most revealing. The complex mechanisms that generated fever have all abated; simpler cooling mechanisms prevail - how many plausible explanations can there be? The decisive factor in fever's benefit is concluded to be water drawn/carried from brain myelin and astrocytes by osmolytes glutamine and taurine released from muscles and brain; the decisive factor in return of autistic behavior after fever is return of water. Copyright © 2016 European Society for Clinical Nutrition and Metabolism. Published by Elsevier Ltd. All rights reserved.

Is crying a self-soothing behavior?

PubMed Central

Gračanin, Asmir; Bylsma, Lauren M.; Vingerhoets, Ad J. J. M.

2014-01-01

This contribution describes the current state-of-the-art of the scientific literature regarding the self-soothing effects of crying. Starting from the general hypothesis that crying is a self-soothing behavior, we consider different mechanisms through which these effects may appear. In the first section, we briefly explain the main functions of human crying. Then we define self-soothing in terms of homeostatic processes of mood regulation and stress reduction and we underline the importance of distinguishing self-soothing effects of crying from social-soothing that it may elicit. We then provide a comprehensive review of the putative mood-enhancing and -relieving effects of crying and their variations stemming from characteristics of crying person, antecedents, manifestations, and social consequences of crying. We also discuss the possible methodological explanations for the seemingly discrepant findings regarding mood improvement and relief that may follow crying. We then provide theoretical and empirical support for our general hypothesis that crying is a self-soothing behavior by presenting and evaluating the possible physiological, cognitive, and behavioral mechanisms that may play a mediating role in the relationship between crying and homeostatic regulation that includes mood improvement and relief. Starting from the idea that social-soothing and self-soothing mechanisms share the same physiological systems, we propose that biological processes act in parallel with learning and reappraisal processes that accompany crying, which results in homeostatic regulation. Given the parallels between self-soothing behaviors in humans and animals, we also propose that crying might self-soothe through a mechanism that shares key properties with rhythmical, stereotypic behaviors. We conclude that, in addition to the importance of socially mediated mechanisms for the mood-enhancing effects of crying, there is converging evidence for the direct, self-soothing effects of crying. PMID:24904511

Toughening Mechanisms in Silica-Filled Epoxy Nanocomposites

NASA Astrophysics Data System (ADS)

Patel, Binay S.

Epoxies are widely used as underfill resins throughout the microelectronics industry to mechanically couple and protect various components of flip-chip assemblies. Generally rigid materials largely surround underfill resins. Improving the mechanical and thermal properties of epoxy resins to better match those of their rigid counterparts can help extend the service lifetime of flip-chip assemblies. Recently, researchers have demonstrated that silica nanoparticles are effective toughening agents for lightly-crosslinked epoxies. Improvements in the fracture toughness of silica-filled epoxy nanocomposites have primarily been attributed to two toughening mechanisms: particle debonding with subsequent void growth and matrix shear banding. Various attempts have been made to model the contribution of these toughening mechanisms to the overall fracture energy observed in silica-filled epoxy nanocomposites. However, disparities still exist between experimental and modeled fracture energy results. In this dissertation, the thermal, rheological and mechanical behavior of eight different types of silica-filled epoxy nanocomposites was investigated. Each nanocomposite consisted of up to 10 vol% of silica nanoparticles with particle sizes ranging from 20 nm to 200 nm, with a variety of surface treatments and particle structures. Fractographical analysis was conducted with new experimental approaches in order to accurately identify morphological evidence for each proposed toughening mechanism. Overall, three major insights into the fracture behavior of real world silica-filled epoxy nanocomposites were established. First, microcracking was observed as an essential toughening mechanism in silica-filled epoxy nanocomposites. Microcracking was observed on the surface and subsurface of fractured samples in each type of silica-filled epoxy nanocomposite. The additional toughening contribution of microcracking to overall fracture energy yielded excellent agreement between experimental and modeled fracture energy results. Furthermore, the contribution of microcracking was most prevalent at lower filler contents which suggests that the presence of microcracking may account for the previously unexplained improvements in fracture behavior attained in silica-filled epoxy nanocomposites at low filler contents. Secondly, surface modification through the application of three different propriety surface treatments ("A", "B" and "C") was found to greatly influence the processibility and fracture behavior of silica-filled epoxy nanocomposites. B-treated silica nanoparticles were found to readily form micron-scale agglomerates, settled during nanocomposite curing and showed no improvement in fracture toughness with increasing filler content. In contrast, the nanocomposites consisting of A-treated and C-treated silica nanoparticles yielded morphologies primarily containing well-dispersed nanoparticles. Therefore, fracture toughness improved with increasing filler content. Finally, particle porosity was found to have no significant effect on fracture behavior for the range of silica-filled epoxy nanocomposites investigated. Lower density porous silica nanoparticles were just as effective toughening agents as higher density non-porous silica nanoparticles. Consequently, the potential exists for the use of toughened-epoxies in lightweight structural applications.

Behavior analysis: the science of training.

PubMed

Farhoody, Parvene

2012-09-01

Behavior analysis is a data-driven science dedicated to understanding the mechanisms of behavior. Applied behavior analysis is a branch of this scientific field that systematically applies scientific principles to real-world problems in an effort to improve quality of life. The use of the behavioral technology provides a way to teach human and nonhuman animals more effectively and efficiently and offers those using this technology increased success in achieving behavioral goals. Copyright © 2012 Elsevier Inc. All rights reserved.

Sensory Gain Outperforms Efficient Readout Mechanisms in Predicting Attention-Related Improvements in Behavior

PubMed Central

Ester, Edward F.; Deering, Sean

2014-01-01

Spatial attention has been postulated to facilitate perceptual processing via several different mechanisms. For instance, attention can amplify neural responses in sensory areas (sensory gain), mediate neural variability (noise modulation), or alter the manner in which sensory signals are selectively read out by postsensory decision mechanisms (efficient readout). Even in the context of simple behavioral tasks, it is unclear how well each of these mechanisms can account for the relationship between attention-modulated changes in behavior and neural activity because few studies have systematically mapped changes between stimulus intensity, attentional focus, neural activity, and behavioral performance. Here, we used a combination of psychophysics, event-related potentials (ERPs), and quantitative modeling to explicitly link attention-related changes in perceptual sensitivity with changes in the ERP amplitudes recorded from human observers. Spatial attention led to a multiplicative increase in the amplitude of an early sensory ERP component (the P1, peaking ∼80–130 ms poststimulus) and in the amplitude of the late positive deflection component (peaking ∼230–330 ms poststimulus). A simple model based on signal detection theory demonstrates that these multiplicative gain changes were sufficient to account for attention-related improvements in perceptual sensitivity, without a need to invoke noise modulation. Moreover, combining the observed multiplicative gain with a postsensory readout mechanism resulted in a significantly poorer description of the observed behavioral data. We conclude that, at least in the context of relatively simple visual discrimination tasks, spatial attention modulates perceptual sensitivity primarily by modulating the gain of neural responses during early sensory processing PMID:25274817

Neural processes underlying cultural differences in cognitive persistence.

PubMed

Telzer, Eva H; Qu, Yang; Lin, Lynda C

2017-08-01

Self-improvement motivation, which occurs when individuals seek to improve upon their competence by gaining new knowledge and improving upon their skills, is critical for cognitive, social, and educational adjustment. While many studies have delineated the neural mechanisms supporting extrinsic motivation induced by monetary rewards, less work has examined the neural processes that support intrinsically motivated behaviors, such as self-improvement motivation. Because cultural groups traditionally vary in terms of their self-improvement motivation, we examined cultural differences in the behavioral and neural processes underlying motivated behaviors during cognitive persistence in the absence of extrinsic rewards. In Study 1, 71 American (47 females, M=19.68 years) and 68 Chinese (38 females, M=19.37 years) students completed a behavioral cognitive control task that required cognitive persistence across time. In Study 2, 14 American and 15 Chinese students completed the same cognitive persistence task during an fMRI scan. Across both studies, American students showed significant declines in cognitive performance across time, whereas Chinese participants demonstrated effective cognitive persistence. These behavioral effects were explained by cultural differences in self-improvement motivation and paralleled by increasing activation and functional coupling between the inferior frontal gyrus (IFG) and ventral striatum (VS) across the task among Chinese participants, neural activation and coupling that remained low in American participants. These findings suggest a potential neural mechanism by which the VS and IFG work in concert to promote cognitive persistence in the absence of extrinsic rewards. Thus, frontostriatal circuitry may be a neurobiological signal representing intrinsic motivation for self-improvement that serves an adaptive function, increasing Chinese students' motivation to engage in cognitive persistence. Copyright © 2017 Elsevier Inc. All rights reserved.

Design of Boiler Welding for Improvement of Lifetime and Cost Control.

PubMed

Thong-On, Atcharawadi; Boonruang, Chatdanai

2016-11-03

Fe-2.25Cr-1Mo a widely used material for headers and steam tubes of boilers. Welding of steam tube to header is required for production of boiler. Heat affected zone of the weld can have poor mechanical properties and poor corrosion behavior leading to weld failure. The cost of material used for steam tube and header of boiler should be controlled. This study propose a new materials design for boiler welding to improve the lifetime and cost control, using tungsten inert gas (TIG) welding of Fe-2.25Cr-1Mo tube to carbon steel pipe with chromium-containing filler. The cost of production could be reduced by the use of low cost material such as carbon steel pipe for boiler header. The effect of chromium content on corrosion behavior of the weld was greater than that of the microstructure. The lifetime of the welded boiler can be increased by improvement of mechanical properties and corrosion behavior of the heat affected zone.

Design of Boiler Welding for Improvement of Lifetime and Cost Control

PubMed Central

Thong-On, Atcharawadi; Boonruang, Chatdanai

2016-01-01

Fe-2.25Cr-1Mo a widely used material for headers and steam tubes of boilers. Welding of steam tube to header is required for production of boiler. Heat affected zone of the weld can have poor mechanical properties and poor corrosion behavior leading to weld failure. The cost of material used for steam tube and header of boiler should be controlled. This study propose a new materials design for boiler welding to improve the lifetime and cost control, using tungsten inert gas (TIG) welding of Fe-2.25Cr-1Mo tube to carbon steel pipe with chromium-containing filler. The cost of production could be reduced by the use of low cost material such as carbon steel pipe for boiler header. The effect of chromium content on corrosion behavior of the weld was greater than that of the microstructure. The lifetime of the welded boiler can be increased by improvement of mechanical properties and corrosion behavior of the heat affected zone. PMID:28774014

Modeling and Performance Improvement of the Constant Power Regulator Systems in Variable Displacement Axial Piston Pump

PubMed Central

Park, Sung Hwan; Lee, Ji Min; Kim, Jong Shik

2013-01-01

An irregular performance of a mechanical-type constant power regulator is considered. In order to find the cause of an irregular discharge flow at the cut-off pressure area, modeling and numerical simulations are performed to observe dynamic behavior of internal parts of the constant power regulator system for a swashplate-type axial piston pump. The commercial numerical simulation software AMESim is applied to model the mechanical-type regulator with hydraulic pump and simulate the performance of it. The validity of the simulation model of the constant power regulator system is verified by comparing simulation results with experiments. In order to find the cause of the irregular performance of the mechanical-type constant power regulator system, the behavior of main components such as the spool, sleeve, and counterbalance piston is investigated using computer simulation. The shape modification of the counterbalance piston is proposed to improve the undesirable performance of the mechanical-type constant power regulator. The performance improvement is verified by computer simulation using AMESim software. PMID:24282389

Effect of processing method on the mechanical and thermal of Silvergrass/HDPE composites

NASA Astrophysics Data System (ADS)

Liu, Bing; Jin, Yueqiang; Wang, Shuying

2017-05-01

This paper investigates the effect of compression and injection molding methods on properties of Silvergrass-HDPE (High Density Polyethylene) composites, with respect to mechanical behaviors. Maleated polyethylene (MAPE) was added in the composite and improved the mechanical property of the composite. The research founds MAPE can improve the mechanical property because it improved the interfacial compatibility as a coupling agent. When added a content of 8% of MAPE, Silvergrass-HDPE composites made from compression molding shows a better mechanical performance in tensile strength and flexural strength than that made from injection molding, with increasing Silvergrass fiber content from 30% to 50%. However, the WPCs (wood plastics composites) made from injection molding had a lower degree of crystallinity with or without MAPE treatment.

Biobased, self-healable, high strength rubber with tunicate cellulose nanocrystals.

PubMed

Cao, Liming; Yuan, Daosheng; Xu, Chuanhui; Chen, Yukun

2017-10-19

Cellulose nanocrystals represent a promising and environmentally friendly reinforcing nanofiller for polymers, especially for rubbers and elastomers. Here, a simple approach via latex mixing is used to fabricate biobased, healable rubber with high strength based on epoxidized natural rubber (ENR). Tunicate cellulose nanocrystals (t-CNs) isolated from marine biomass with a high aspect ratio are used to improve both mechanical properties and self-healing behavior of the material. By introducing dynamic hydrogen bond supramolecular networks between oxygenous groups of ENR and hydroxyl groups on the t-CN surface, together with chain interdiffusion in permanently but slightly cross-linked rubber, self-healing and mechanical properties are facilitated significantly in the resulting materials. Macroscopic tensile healing behavior and microscopic morphology analyses are carried out to evaluate the performance of the materials. Both t-CN content and healing time have significant influence on healing behavior. The results indicate that a synergistic effect between molecular interdiffusion and dynamic hydrogen bond supramolecular networks leads to the improved self-healing behavior.

Cognitive Coping as a Mechanism of Change in Cognitive-Behavioral Therapy for Fear of Flying: A Longitudinal Study With 3-Year Follow-Up.

PubMed

Busscher, Bert; Spinhoven, Philip

2017-09-01

To examine the predictive value of cognitive coping strategies at pretreatment and the value of changes in these strategies during cognitive-behavioral treatment for aviophobia for long-term therapy results. Data from baseline, after therapy at 2 months, short-term follow-up at 5 months, and long-term follow-up at 41 months were analyzed (N = 59). Participants were in a long-term process of change, which continued positively after therapy for maladaptive cognitive coping strategies. The use of cognitive coping strategies at baseline was not predictive of long-term outcome. However, a greater increase in the use of adaptive coping strategies, and more importantly, a greater decrease in the use of maladaptive coping strategies were predictive of improvements indicated in self-report of flight anxiety and actual flight behavior at long-term follow-up. Improvement of maladaptive cognitive coping strategies is possibly a key mechanism of change in cognitive-behavioral therapy for aviophobia. © 2016 Wiley Periodicals, Inc.

Processing and Properties of Silicon Carbide Reinforced Reaction Bonded Silicon Nitride Composites

DTIC Science & Technology

1992-11-30

work as well as of polymer derived and composite parts will be discussed. 3. Mechanical Behavior of a Continuous SiC Fiber Reinforced RBSN, S.V...Silicon carbide paniculate composites exhibited improved fracture toughnesses and evidence of R-Curve behavior. Composites made with SiC (w...i£L LIST OF TABLES Page No. 1. Summary of mechanical properties measured for RBSN and RBSN/ SiC 7 composites 2. Summary of characteristics for

Two different mechanisms support selective attention at different phases of training.

PubMed

Itthipuripat, Sirawaj; Cha, Kexin; Byers, Anna; Serences, John T

2017-06-01

Selective attention supports the prioritized processing of relevant sensory information to facilitate goal-directed behavior. Studies in human subjects demonstrate that attentional gain of cortical responses can sufficiently account for attention-related improvements in behavior. On the other hand, studies using highly trained nonhuman primates suggest that reductions in neural noise can better explain attentional facilitation of behavior. Given the importance of selective information processing in nearly all domains of cognition, we sought to reconcile these competing accounts by testing the hypothesis that extensive behavioral training alters the neural mechanisms that support selective attention. We tested this hypothesis using electroencephalography (EEG) to measure stimulus-evoked visual responses from human subjects while they performed a selective spatial attention task over the course of ~1 month. Early in training, spatial attention led to an increase in the gain of stimulus-evoked visual responses. Gain was apparent within ~100 ms of stimulus onset, and a quantitative model based on signal detection theory (SDT) successfully linked the magnitude of this gain modulation to attention-related improvements in behavior. However, after extensive training, this early attentional gain was eliminated even though there were still substantial attention-related improvements in behavior. Accordingly, the SDT-based model required noise reduction to account for the link between the stimulus-evoked visual responses and attentional modulations of behavior. These findings suggest that training can lead to fundamental changes in the way attention alters the early cortical responses that support selective information processing. Moreover, these data facilitate the translation of results across different species and across experimental procedures that employ different behavioral training regimes.

Two different mechanisms support selective attention at different phases of training

PubMed Central

Cha, Kexin; Byers, Anna; Serences, John T.

2017-01-01

Selective attention supports the prioritized processing of relevant sensory information to facilitate goal-directed behavior. Studies in human subjects demonstrate that attentional gain of cortical responses can sufficiently account for attention-related improvements in behavior. On the other hand, studies using highly trained nonhuman primates suggest that reductions in neural noise can better explain attentional facilitation of behavior. Given the importance of selective information processing in nearly all domains of cognition, we sought to reconcile these competing accounts by testing the hypothesis that extensive behavioral training alters the neural mechanisms that support selective attention. We tested this hypothesis using electroencephalography (EEG) to measure stimulus-evoked visual responses from human subjects while they performed a selective spatial attention task over the course of ~1 month. Early in training, spatial attention led to an increase in the gain of stimulus-evoked visual responses. Gain was apparent within ~100 ms of stimulus onset, and a quantitative model based on signal detection theory (SDT) successfully linked the magnitude of this gain modulation to attention-related improvements in behavior. However, after extensive training, this early attentional gain was eliminated even though there were still substantial attention-related improvements in behavior. Accordingly, the SDT-based model required noise reduction to account for the link between the stimulus-evoked visual responses and attentional modulations of behavior. These findings suggest that training can lead to fundamental changes in the way attention alters the early cortical responses that support selective information processing. Moreover, these data facilitate the translation of results across different species and across experimental procedures that employ different behavioral training regimes. PMID:28654635

Improving Executive Function and its Neurobiological Mechanisms through a Mindfulness-Based Intervention: Advances within the Field of Developmental Neuroscience.

PubMed

Tang, Yi-Yuan; Yang, Lizhu; Leve, Leslie D; Harold, Gordon T

2012-12-01

Poor executive function (EF) has been associated with a host of short- and long-term problems across the lifespan, including elevated rates of attention deficit hyperactivity disorder, depression, drug abuse, and antisocial behavior. Mindfulness-based interventions that focus on increasing awareness of one's thoughts, emotions, and actions have been shown to improve specific aspects of EF, including attention, cognitive control, and emotion regulation. In this article, we apply a developmental neuroscience perspective to review research relevant to one specific mindfulness-based intervention, Integrative Body-Mind Training (IBMT). Randomized controlled trials of IBMT indicate improvements in specific EF components, and uniquely highlight the role of neural circuitry specific to the anterior cingulate cortex (ACC) and the autonomic nervous system (ANS) as two brain-based mechanisms that underlie IBMT-related improvements. The relevance of improving specific dimensions of EF through short-term IBMT to prevent a cascade of risk behaviors for children and adolescents is described and future research directions are proposed.

Determinants of First-Time Cancer Examinations in a Rural Community: A Mechanism for Behavior Change

PubMed Central

Guo, Yi; Emanuel, Amber S.; Shepperd, James A.; Dodd, Virginia J.; Marks, John G.; Muller, Keith E.; Riley, Joseph L.

2015-01-01

Objectives. After conducting a media campaign focusing on the importance of oral and pharyngeal cancer (OPC) examinations, we assessed mechanisms of behavior change among individuals receiving an OPC examination for the first time. Methods. We used data from 2 waves of telephone surveys of individuals residing in 36 rural census tracts in northern Florida (n = 806). The second survey occurred after our media intervention. We developed media messages and modes of message delivery with community members via focus groups and intercept interviews. We performed a mediation analysis to examine behavior change mechanisms. Results. Greater exposure to media messages corresponded with heightened concern about OPC. Heightened concern, in turn, predicted receipt of a first-time OPC examination, but only among men. Conclusions. We extended earlier studies by measuring an outcome behavior (receipt of an OPC examination) and demonstrating that the putative mechanism of action (concern about the disease) explained the link between a media intervention and engaging in the target behavior. Improving the quality of media campaigns by engaging community stakeholders in selecting messages and delivery methods is an effective strategy in building public health interventions aimed at changing behaviors. PMID:25973820

Experiment investigation for dynamic behavior of hybrid fiber effects on reactive powder concrete

NASA Astrophysics Data System (ADS)

Wang, Liwen; Pang, Baojun; Yang, Zhenqi; Chi, Runqiang

2010-03-01

The influences of different hybrid fibers (steel fibers add polyvinyl-alcohol fibers) mixture rates for reactive power concrete's (RPC) dynamic mechanical behavior after high temperature burnt was investigated by the Split Hopkinson pressure bar (SHPB) device. A plumbic pulse shaper technique was applied in the experiment, PVDF stress gauge was used to monitor the stress uniformity state within the specimen. The strain rate was between 75~85s-1, base on the stressstrain curves and dynamic modes of concrete specimen, the hybrid fiber effect on the dynamic properties was determined. The results show, dynamic compression strength of specimens which mixed with steel fibers (1.0%,1.5%,2.0% vol. rate) and 0.1% PVA fibers is higher than normal reactive powder concrete (NRPC), but the toughness improves unconspicuous; while strength of the one which has both steel fiber (1.0%,1.5%,2.0% vol. rate) and 0.2%PVA fiber declines than NRPC but the toughness improves and the plastic behaviors strengthened, stress-strain curve has evident rising and plate portions. It can be deduced that the concrete with mixed two kinds of fibers has improved dynamic mechanical properties after high temperature burnt. By compounding previous literature results, the mechanism of the experimental results can be explained.

Better exercise adherence after treatment for cancer (BEAT Cancer) study: Rationale, design, and methods

PubMed Central

Rogers, Laura Q.; McAuley, Edward; Anton, Philip M.; Courneya, Kerry S.; Vicari, Sandra; Hopkins-Price, Patricia; Verhulst, Steven; Mocharnuk, Robert; Hoelzer, Karen

2011-01-01

Most breast cancer survivors do not engage in regular physical activity. Our physical activity behavior change intervention for breast cancer survivors significantly improved physical activity and health outcomes post-intervention during a pilot, feasibility study. Testing in additional sites with a larger sample and longer follow-up is warranted to confirm program effectiveness short and longer term. Importantly, the pilot intervention resulted in changes in physical activity and social cognitive theory constructs, enhancing our potential for testing mechanisms mediating physical activity behavior change. Here, we report the rationale, design, and methods for a two-site, randomized controlled trial comparing the effects of the BEAT Cancer physical activity behavior change intervention to usual care on short and longer term physical activity adherence among breast cancer survivors. Secondary aims include examining social cognitive theory mechanisms of physical activity behavior change and health benefits of the intervention. Study recruitment goal is 256 breast cancer survivors with a history of ductal carcinoma in situ or Stage I, II, or IIIA disease who have completed primary cancer treatment. Outcome measures are obtained at baseline, 3 months (i.e., immediately post-intervention), 6 months, and 12 months and include physical activity, psychosocial factors, fatigue, sleep quality, lower extremity joint dysfunction, cardiorespiratory fitness, muscle strength, and waist-to-hip ratio. Confirming behavior change effectiveness, health effects, and underlying mechanisms of physical activity behavior change interventions will facilitate translation to community settings for improving the health and well-being of breast cancer survivors. PMID:21983625

Hydration Phase Diagram of Clay Particles from Molecular Simulations.

PubMed

Honorio, Tulio; Brochard, Laurent; Vandamme, Matthieu

2017-11-07

Adsorption plays a fundamental role in the behavior of clays. Because of the confinement between solid clay layers on the nanoscale, adsorbed water is structured in layers, which can occupy a specific volume. The transition between these states is intimately related to key features of clay thermo-hydro-mechanical behavior. In this article, we consider the hydration states of clays as phases and the transition between these states as phase changes. The thermodynamic formulation supporting this idea is presented. Then, the results from grand canonical Monte Carlo simulations of sodium montmorillonite are used to derive hydration phase diagrams. The stability analysis presented here explains the coexistence of different hydration states at clay particle scale and improves our understanding of the irreversibilities of clay thermo-hydro-mechanical behavior. Our results provide insights into the mechanics of the elementary constituents of clays, which is crucial for a better understanding of the macroscopic behavior of clay-rich rocks and soils.

Pathological Overeating: Emerging Evidence for a Compulsivity Construct

PubMed Central

Moore, Catherine F; Sabino, Valentina; Koob, George F; Cottone, Pietro

2017-01-01

Compulsive eating behavior is a transdiagnostic construct that is characteristic of medical and psychiatric conditions such as forms of obesity and eating disorders. Although feeding research is moving toward a better understanding of the proposed addictive properties of food, the components and the mechanisms contributing to compulsive eating are not yet clearly defined or understood. Current understanding highlights three elements of compulsive behavior as it applies to pathological overeating: (1) habitual overeating; (2) overeating to relieve a negative emotional state; and (3) overeating despite aversive consequences. These elements emerge through mechanisms involving pathological habit formation through an aberrant learning process, the emergence of a negative emotional state, and dysfunctions in behavioral control. Dysfunctions in systems within neurocircuitries that comprise the basal ganglia, the extended amygdala, and the prefrontal cortex result in compulsive eating behaviors. Here, we present evidence to relate compulsive eating behavior and addiction and to characterize their underlying neurobiological mechanisms. A major need to improve understanding of compulsive eating through the integration of complex motivational, emotional, and cognitive constructs is warranted. PMID:27922596

Pathological Overeating: Emerging Evidence for a Compulsivity Construct.

PubMed

Moore, Catherine F; Sabino, Valentina; Koob, George F; Cottone, Pietro

2017-06-01

Compulsive eating behavior is a transdiagnostic construct that is characteristic of medical and psychiatric conditions such as forms of obesity and eating disorders. Although feeding research is moving toward a better understanding of the proposed addictive properties of food, the components and the mechanisms contributing to compulsive eating are not yet clearly defined or understood. Current understanding highlights three elements of compulsive behavior as it applies to pathological overeating: (1) habitual overeating; (2) overeating to relieve a negative emotional state; and (3) overeating despite aversive consequences. These elements emerge through mechanisms involving pathological habit formation through an aberrant learning process, the emergence of a negative emotional state, and dysfunctions in behavioral control. Dysfunctions in systems within neurocircuitries that comprise the basal ganglia, the extended amygdala, and the prefrontal cortex result in compulsive eating behaviors. Here, we present evidence to relate compulsive eating behavior and addiction and to characterize their underlying neurobiological mechanisms. A major need to improve understanding of compulsive eating through the integration of complex motivational, emotional, and cognitive constructs is warranted.

Constitutive behavior and progressive mechanical failure of electrodes in lithium-ion batteries

NASA Astrophysics Data System (ADS)

Zhang, Chao; Xu, Jun; Cao, Lei; Wu, Zenan; Santhanagopalan, Shriram

2017-07-01

The electrodes of lithium-ion batteries (LIB) are known to be brittle and to fail earlier than the separators during an external crush event. Thus, the understanding of mechanical failure mechanism for LIB electrodes (anode and cathode) is critical for the safety design of LIB cells. In this paper, we present experimental and numerical studies on the constitutive behavior and progression of failure in LIB electrodes. Mechanical tests were designed and conducted to evaluate the constitutive properties of porous electrodes. Constitutive models were developed to describe the stress-strain response of electrodes under uniaxial tensile and compressive loads. The failure criterion and a damage model were introduced to model their unique tensile and compressive failure behavior. The failure mechanism of LIB electrodes was studied using the blunt rod test on dry electrodes, and numerical models were built to simulate progressive failure. The different failure processes were examined and analyzed in detail numerically, and correlated with experimentally observed failure phenomena. The test results and models improve our understanding of failure behavior in LIB electrodes, and provide constructive insights on future development of physics-based safety design tools for battery structures under mechanical abuse.

Constitutive behavior and progressive mechanical failure of electrodes in lithium-ion batteries

DOE PAGES

Zhang, Chao; Xu, Jun; Cao, Lei; ...

2017-05-05

The electrodes of lithium-ion batteries (LIB) are known to be brittle and to fail earlier than the separators during an external crush event. Thus, the understanding of mechanical failure mechanism for LIB electrodes (anode and cathode) is critical for the safety design of LIB cells. In this paper, we present experimental and numerical studies on the constitutive behavior and progression of failure in LIB electrodes. Mechanical tests were designed and conducted to evaluate the constitutive properties of porous electrodes. Constitutive models were developed to describe the stress-strain response of electrodes under uniaxial tensile and compressive loads. The failure criterion andmore » a damage model were introduced to model their unique tensile and compressive failure behavior. The failure mechanism of LIB electrodes was studied using the blunt rod test on dry electrodes, and numerical models were built to simulate progressive failure. The different failure processes were examined and analyzed in detail numerically, and correlated with experimentally observed failure phenomena. Finally, the test results and models improve our understanding of failure behavior in LIB electrodes, and provide constructive insights on future development of physics-based safety design tools for battery structures under mechanical abuse.« less

Combining instruction prefetching with partial cache locking to improve WCET in real-time systems.

PubMed

Ni, Fan; Long, Xiang; Wan, Han; Gao, Xiaopeng

2013-01-01

Caches play an important role in embedded systems to bridge the performance gap between fast processor and slow memory. And prefetching mechanisms are proposed to further improve the cache performance. While in real-time systems, the application of caches complicates the Worst-Case Execution Time (WCET) analysis due to its unpredictable behavior. Modern embedded processors often equip locking mechanism to improve timing predictability of the instruction cache. However, locking the whole cache may degrade the cache performance and increase the WCET of the real-time application. In this paper, we proposed an instruction-prefetching combined partial cache locking mechanism, which combines an instruction prefetching mechanism (termed as BBIP) with partial cache locking to improve the WCET estimates of real-time applications. BBIP is an instruction prefetching mechanism we have already proposed to improve the worst-case cache performance and in turn the worst-case execution time. The estimations on typical real-time applications show that the partial cache locking mechanism shows remarkable WCET improvement over static analysis and full cache locking.

Combining Instruction Prefetching with Partial Cache Locking to Improve WCET in Real-Time Systems

PubMed Central

Ni, Fan; Long, Xiang; Wan, Han; Gao, Xiaopeng

2013-01-01

Caches play an important role in embedded systems to bridge the performance gap between fast processor and slow memory. And prefetching mechanisms are proposed to further improve the cache performance. While in real-time systems, the application of caches complicates the Worst-Case Execution Time (WCET) analysis due to its unpredictable behavior. Modern embedded processors often equip locking mechanism to improve timing predictability of the instruction cache. However, locking the whole cache may degrade the cache performance and increase the WCET of the real-time application. In this paper, we proposed an instruction-prefetching combined partial cache locking mechanism, which combines an instruction prefetching mechanism (termed as BBIP) with partial cache locking to improve the WCET estimates of real-time applications. BBIP is an instruction prefetching mechanism we have already proposed to improve the worst-case cache performance and in turn the worst-case execution time. The estimations on typical real-time applications show that the partial cache locking mechanism shows remarkable WCET improvement over static analysis and full cache locking. PMID:24386133

Effect of geometric size on mechanical properties of dielectric elastomers based on an improved visco-hyperelastic film model

NASA Astrophysics Data System (ADS)

Chang, Mengzhou; Wang, Zhenqing; Tong, Liyong; Liang, Wenyan

2017-03-01

Dielectric polymers show complex mechanical behaviors with different boundary conditions, geometry size and pre-stress. A viscoelastic model suitable for inhomogeneous deformation is presented integrating the Kelvin-Voigt model in a new form in this work. For different types of uniaxial tensile test loading along the length direction of sample, single-step-relaxation tests, loading-unloading tests and tensile-creep-relaxation tests the improved model provides a quite favorable comparison with the experiment results. Moreover, The mechanical properties of test sample with several length-width ratios under different boundary conditions are also invested. The influences of the different boundary conditions are calculated with a stress applied on the boundary point and the result show that the fixed boundary will increase the stress compare with homogeneous deformation. In modeling the effect of pre-stress in the shear test, three pre-stressed mode are discussed. The model validation on the general mechanical behavior shows excellent predictive capability.

Neural activity during emotion recognition after combined cognitive plus social cognitive training in schizophrenia.

PubMed

Hooker, Christine I; Bruce, Lori; Fisher, Melissa; Verosky, Sara C; Miyakawa, Asako; Vinogradov, Sophia

2012-08-01

Cognitive remediation training has been shown to improve both cognitive and social cognitive deficits in people with schizophrenia, but the mechanisms that support this behavioral improvement are largely unknown. One hypothesis is that intensive behavioral training in cognition and/or social cognition restores the underlying neural mechanisms that support targeted skills. However, there is little research on the neural effects of cognitive remediation training. This study investigated whether a 50 h (10-week) remediation intervention which included both cognitive and social cognitive training would influence neural function in regions that support social cognition. Twenty-two stable, outpatient schizophrenia participants were randomized to a treatment condition consisting of auditory-based cognitive training (AT) [Brain Fitness Program/auditory module ~60 min/day] plus social cognition training (SCT) which was focused on emotion recognition [~5-15 min per day] or a placebo condition of non-specific computer games (CG) for an equal amount of time. Pre and post intervention assessments included an fMRI task of positive and negative facial emotion recognition, and standard behavioral assessments of cognition, emotion processing, and functional outcome. There were no significant intervention-related improvements in general cognition or functional outcome. fMRI results showed the predicted group-by-time interaction. Specifically, in comparison to CG, AT+SCT participants had a greater pre-to-post intervention increase in postcentral gyrus activity during emotion recognition of both positive and negative emotions. Furthermore, among all participants, the increase in postcentral gyrus activity predicted behavioral improvement on a standardized test of emotion processing (MSCEIT: Perceiving Emotions). Results indicate that combined cognition and social cognition training impacts neural mechanisms that support social cognition skills. Copyright © 2012 Elsevier B.V. All rights reserved.

Neural activity during emotion recognition after combined cognitive plus social-cognitive training in schizophrenia

PubMed Central

Hooker, Christine I.; Bruce, Lori; Fisher, Melissa; Verosky, Sara C.; Miyakawa, Asako; Vinogradov, Sophia

2012-01-01

Cognitive remediation training has been shown to improve both cognitive and social-cognitive deficits in people with schizophrenia, but the mechanisms that support this behavioral improvement are largely unknown. One hypothesis is that intensive behavioral training in cognition and/or social-cognition restores the underlying neural mechanisms that support targeted skills. However, there is little research on the neural effects of cognitive remediation training. This study investigated whether a 50 hour (10-week) remediation intervention which included both cognitive and social-cognitive training would influence neural function in regions that support social-cognition. Twenty-two stable, outpatient schizophrenia participants were randomized to a treatment condition consisting of auditory-based cognitive training (AT) [Brain Fitness Program/auditory module ~60 minutes/day] plus social-cognition training (SCT) which was focused on emotion recognition [~5–15 minutes per day] or a placebo condition of non-specific computer games (CG) for an equal amount of time. Pre and post intervention assessments included an fMRI task of positive and negative facial emotion recognition, and standard behavioral assessments of cognition, emotion processing, and functional outcome. There were no significant intervention-related improvements in general cognition or functional outcome. FMRI results showed the predicted group-by-time interaction. Specifically, in comparison to CG, AT+SCT participants had a greater pre-to-post intervention increase in postcentral gyrus activity during emotion recognition of both positive and negative emotions. Furthermore, among all participants, the increase in postcentral gyrus activity predicted behavioral improvement on a standardized test of emotion processing (MSCEIT: Perceiving Emotions). Results indicate that combined cognition and social-cognition training impacts neural mechanisms that support social-cognition skills. PMID:22695257

Effects of Cr2O3 Activating Flux on the Plasma Plume in Pulsed Laser Welding

NASA Astrophysics Data System (ADS)

Yi, Luo; Yunfei, Du; Xiaojian, Xie; Rui, Wan; Liang, Zhu; Jingtao, Han

2016-11-01

The effects of Cr2O3 activating flux on pulsed YAG laser welding of stainless steel and, particularly, on the behavior of the plasma plume in the welding process were investigated. According to the acoustic emission (AE) signals detected in the welding process, the possible mechanism for the improvement in penetration depth was discussed. The results indicated that the AE signals detected in the welding process reflected the behavior of the plasma plume as pulsed laser energy affecting the molten pool. The root-mean-square (RMS) waveform, AE count, and power spectrum of AE signals were three effective means to characterize the behavior of the plasma plume, which indicated the characteristics of energy released by the plasma plume. The activating flux affected by the laser beam helped to increase the duration and intensity of energy released by the plasma plume, which improved the recoil force and thermal effect transferred from the plasma plume to the molten pool. These results were the main mechanism for Cr2O3 activating flux addition improving the penetration depth in pulsed YAG laser welding.

Improvement of fatigue resistance for multilayer lead zirconate titanate (PZT)-based ceramic actuators by external mechanical loads

NASA Astrophysics Data System (ADS)

Yang, Gang; Yue, Zhenxing; Ji, Ye; Chu, Xiangcheng; Li, Longtu

2008-12-01

The influence of external compressive loads, applied along a direction perpendicular to polarization, on fatigue behaviors of multilayer lead zirconate titanate (PZT)-based ceramic actuators was investigated. Under no external mechanical load, a normal fatigue behavior was observed, demonstrating that both switching polarization (Pswitching) and remnant polarization (Pr) progressively decreased with increasing switching cycles due to domain pinning by charge point defects. However, an anomalous enhancement in both switching and remnant polarizations was observed upon application of the external compressive loads. After 5×106 cycles of polarization switching, Pswitching and Pr increase by about 13% and 6% at 40 MPa, respectively, while Pswitching and Pr increase by about 11% and 21% at 60 MPa, respectively. The improvement of fatigue resistance can be attributed to non-180° domain switching and suppression of microcracking, triggered by external mechanical loads.

Revealing flow behaviors of metallic glass based on activation of flow units

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ge, T. P.; Wang, W. H.; Bai, H. Y., E-mail: hybai@iphy.ac.cn

2016-05-28

Atomic level flow plays a critical role in the mechanical behavior of metallic glass (MG) while the connection between the flow and the heterogeneous microstructure of the glass remains unclear. We describe the heterogeneity of MGs as the elastic matrix with “inclusions” of nano-scale liquid-like flow units, and the plastic flow behavior of MGs is considered to be accommodated by the flow units. We show that the model can explain the various deformation behaviors, the transformation from inhomogeneous deformation to homogeneous flow upon strain rate or temperature, and the deformation map in MGs, which might provide insights into the flowmore » mechanisms in glasses and inspiration for improving the plasticity of MGs.« less

Impact compaction of a granular material

DOE PAGES

Fenton, Gregg; Asay, Blaine; Dalton, Devon

2015-05-19

The dynamic behavior of granular materials has importance to a variety of engineering applications. Structural seismic coupling, planetary science, and earth penetration mechanics, are just a few of the application areas. Although the mechanical behavior of granular materials of various types have been studied extensively for several decades, the dynamic behavior of such materials remains poorly understood. High-quality experimental data are needed to improve our general understanding of granular material compaction physics. This study will describe how an instrumented plunger impact system can be used to measure pressure-density relationships for model materials at high and controlled strain rates and subsequentlymore » used for computational modeling.« less

Evaluating the bending response of two osseointegrated transfemoral implant systems using 3D digital image correlation.

PubMed

Thompson, Melanie L; Backman, David; Branemark, Rickard; Mechefske, Chris K

2011-05-01

Osseointegrated transfemoral implants have been introduced as a prosthetic solution for above knee amputees. They have shown great promise, providing an alternative for individuals who could not be accommodated by conventional, socket-based prostheses; however, the occurrence of device failures is of concern. In an effort to improve the strength and longevity of the device, a new design has been proposed. This study investigates the mechanical behavior of the new taper-based assembly in comparison to the current hex-based connection for osseointegrated transfemoral implant systems. This was done to better understand the behavior of components under loading, in order to optimize the assembly specifications and improve the useful life of the system. Digital image correlation was used to measure surface strains on two assemblies during static loading in bending. This provided a means to measure deformation over the entire sample and identify critical locations as the assembly was subjected to a series of loading conditions. It provided a means to determine the effects of tightening specifications and connection geometry on the material response and mechanical behavior of the assemblies. Both osseoinegrated assemblies exhibited improved strength and mechanical performance when tightened to a level beyond the current specified tightening torque of 12 N m. This was shown by decreased strain concentration values and improved distribution of tensile strain. Increased tightening torque provides an improved connection between components regardless of design, leading to increased torque retention, decreased peak tensile strain values, and a more gradual, primarily compressive distribution of strains throughout the assembly.

Microstructure Analysis of Ti-xPt Alloys and the Effect of Pt Content on the Mechanical Properties and Corrosion Behavior of Ti Alloys

PubMed Central

Song, Ho-Jun; Han, Mi-Kyung; Jeong, Hyeon-Gyeong; Lee, Yong-Tai; Park, Yeong-Joon

2014-01-01

The microstructure, mechanical properties, and corrosion behavior of binary Ti-xPt alloys containing 5, 10, 15 and 20 wt% Pt were investigated in order to develop new Ti-based dental materials possessing superior properties than those of commercially pure titanium (cp-Ti). All of the Ti-xPt (x = 5, 10, 15, 20) alloys showed hexagonal α-Ti structure with cubic Ti3Pt intermetallic phase. The mechanical properties and corrosion behavior of Ti-xPt alloys were sensitive to the Pt content. The addition of Pt contributed to hardening of cp-Ti and to improving its oxidation resistance. Electrochemical results showed that the Ti-xPt alloys exhibited superior corrosion resistance than that of cp-Ti. PMID:28788660

Fracture and fatigue behavior of shot-blasted titanium dental implants.

PubMed

Gil, F J; Planell, J A; Padrós, A

2002-01-01

This investigation studies the effect of the shot-blasting treatment on the cyclic deformation behavior of a commercially pure titanium, with two microstructures: equiaxed and acicular. The fatigue tests were carried out in artificial saliva medium at 37 degrees C. Cyclic deformation tests have been carried out up to fracture, and the fatigue crack nucleation and propagation have been analyzed. The results show that the shot-blasting treatment improves the fatigue life in the microstructures studied, and that the equiaxed was better in mechanical properties than the acicular. The cause of this improvement in the mechanical properties is due to the compressive stress on the material surface for the shot-blasted specimens. Hardness tests were carried out to determine the value of these internal stresses.

Improving Our Ability to Evaluate Underlying Mechanisms of Behavioral Onset and Other Event Occurrence Outcomes: A Discrete-Time Survival Mediation Model

PubMed Central

Fairchild, Amanda J.; Abara, Winston E.; Gottschall, Amanda C.; Tein, Jenn-Yun; Prinz, Ronald J.

2015-01-01

The purpose of this article is to introduce and describe a statistical model that researchers can use to evaluate underlying mechanisms of behavioral onset and other event occurrence outcomes. Specifically, the article develops a framework for estimating mediation effects with outcomes measured in discrete-time epochs by integrating the statistical mediation model with discrete-time survival analysis. The methodology has the potential to help strengthen health research by targeting prevention and intervention work more effectively as well as by improving our understanding of discretized periods of risk. The model is applied to an existing longitudinal data set to demonstrate its use, and programming code is provided to facilitate its implementation. PMID:24296470

Processes of behavior change and weight loss in a theory-based weight loss intervention program: a test of the process model for lifestyle behavior change.

PubMed

Gillison, Fiona; Stathi, Afroditi; Reddy, Prasuna; Perry, Rachel; Taylor, Gordon; Bennett, Paul; Dunbar, James; Greaves, Colin

2015-01-16

Process evaluation is important for improving theories of behavior change and behavioral intervention methods. The present study reports on the process outcomes of a pilot test of the theoretical model (the Process Model for Lifestyle Behavior Change; PMLBC) underpinning an evidence-informed, theory-driven, group-based intervention designed to promote healthy eating and physical activity for people with high cardiovascular risk. 108 people at high risk of diabetes or heart disease were randomized to a group-based weight management intervention targeting diet and physical activity plus usual care, or to usual care. The intervention comprised nine group based sessions designed to promote motivation, social support, self-regulation and understanding of the behavior change process. Weight loss, diet, physical activity and theoretically defined mediators of change were measured pre-intervention, and after four and 12 months. The intervention resulted in significant improvements in fiber intake (M between-group difference = 5.7 g/day, p < .001) but not fat consumption (-2.3 g/day, p = 0.13), that were predictive of weight loss at both four months (M between-group difference = -1.98 kg, p < .01; R(2) = 0.2, p < 0.005), and 12 months (M difference = -1.85 kg, p = 0.1; R(2) = 0.1, p < 0.01). The intervention was successful in improving the majority of specified mediators of behavior change, and the predicted mechanisms of change specified in the PMBLC were largely supported. Improvements in self-efficacy and understanding of the behavior change process were associated with engagement in coping planning and self-monitoring activities, and successful dietary change at four and 12 months. While participants reported improvements in motivational and social support variables, there was no effect of these, or of the intervention overall, on physical activity. The data broadly support the theoretical model for supporting some dietary changes, but not for physical activity. Systematic intervention design allowed us to identify where improvements to the intervention may be implemented to promote change in all proposed mediators. More work is needed to explore effective mechanisms within interventions to promote physical activity behavior.

Effects of extrusion and heat treatment on the mechanical properties and biocorrosion behaviors of a Mg-Nd-Zn-Zr alloy.

PubMed

Zhang, Xiaobo; Yuan, Guangyin; Mao, Lin; Niu, Jialin; Fu, Penghuai; Ding, Wenjiang

2012-03-01

Mechanical properties at room temperature and biocorrosion behaviors in simulated body fluid (SBF) at 37 °C of a new type of patented Mg-3Nd-0.2Zn-0.4Zr (hereafter, denoted as JDBM) alloy prepared at different extrusion temperatures, as well as heat treatment, were studied. The mechanical properties of this magnesium alloy at room temperature were improved significantly after extrusion and heat treatment compared to an as-cast alloy. The results of mechanical properties show that the yield strength (YS) decreases with increasing extrusion temperature. The tensile elongation decreases a little while the ultimate tensile strength (UTS) has no obvious difference. The yield strength and ultimate tensile strength were improved clearly after heat treatment at 200 °C for 10 h compared with that at the extrusion state, which can be mainly contributed to the precipitation strengthening. The biocorrosion behaviors of the JDBM alloy were studied using immersion tests and electrochemical tests. The results reveal that the extruded JDBM alloy and the aging treatment on the extruded alloy show much better biocorrosion resistance than that at solid solution state (T4 treatment), and the JDBM exhibited favorable uniform corrosion mode in SBF. Copyright © 2011 Elsevier Ltd. All rights reserved.

Neural Mechanisms of Improvements in Social Motivation after Pivotal Response Treatment: Two Case Studies

ERIC Educational Resources Information Center

Voos, Avery C.; Pelphrey, Kevin A.; Tirrell, Jonathan; Bolling, Danielle Z.; Vander Wyk, Brent; Kaiser, Martha D.; McPartland, James C.; Volkmar, Fred R.; Ventola, Pamela

2013-01-01

Pivotal response treatment (PRT) is an empirically validated behavioral treatment that has widespread positive effects on communication, behavior, and social skills in young children with autism spectrum disorder (ASD). For the first time, functional magnetic resonance imaging was used to identify the neural correlates of successful response to…

Integrating a Social Behavior Intervention during Small Group Academic Instruction Using a Total Group Criterion Intervention

ERIC Educational Resources Information Center

Rodriguez, Billie Jo; Anderson, Cynthia M.

2014-01-01

Total group contingencies, a variation of interdependent group contingencies, provide educators with an efficient and effective mechanism to improve social behavior and increase academic skills. Their utility has not been examined in small educational groups. This is unfortunate as supplemental instruction frequently is delivered in small group…

Improving attachments of remotely-deployed dorsal fin-mounted tags: tissue structure, hydrodynamics, in situ performance, and tagged-animal follow-up

DTIC Science & Technology

2012-09-30

and then design and test improved retention systems 4. Conduct follow-up studies of tagged whales to accurately quantify wound healing and the...behavior (e.g., beaked whale versus melon-headed whale). 3. In situ behavior of retention system elements (Key individuals: Andrews, Schorr...Although we have a good idea of how the LIMPET retention system operates when first implanted, we do not fully understand the mechanics in a living fin

Improving attachments of remotely-deployed dorsal fin-mounted tags: tissue structure, hydrodynamics, in situ performance, and tagged-animal follow-up

DTIC Science & Technology

2011-09-01

Examine the in situ performance of our current attachment devices and then design and test improved retention systems Report Documentation Page Form...behavior (e.g., beaked whale versus melon-headed whale). 3. In situ behavior of retention system elements (Key individuals: Andrews, Schorr...Although we have a good idea of how the LIMPET retention system operates when first implanted, we do not fully understand the mechanics in a living fin

A system dynamics approach for modeling construction workers' safety attitudes and behaviors.

PubMed

Shin, Mingyu; Lee, Hyun-Soo; Park, Moonseo; Moon, Myunggi; Han, Sangwon

2014-07-01

Construction accidents are caused by an unsafe act (i.e., a person's behavior or activity that deviates from normal accepted safe procedure) and/or an unsafe condition (i.e., a hazard or an unsafe mechanical or physical environment). While there has been dramatic improvement in creating safer construction environments, relatively little is known regarding the elimination of construction workers' unsafe acts. To address this deficiency, this paper aims to develop a system dynamics (SD)-based model of construction workers' mental processes that can help analyze the feedback mechanisms and the resultant dynamics regarding the workers' safety attitudes and safe behaviors. The developed model is applied to examine the effectiveness of three safety improvement policies: incentives for safe behaviors, and increased levels of communication and immersion in accidents. Application of the model verifies the strong potential of the developed model to provide a better understanding of how to eliminate unsafe acts, and to function as a robust test-bed to assess the effectiveness of safety programs or training sessions before their implementation. Copyright © 2013 Elsevier Ltd. All rights reserved.

Physical Activity for Cognitive and Mental Health in Youth: A Systematic Review of Mechanisms.

PubMed

Lubans, David; Richards, Justin; Hillman, Charles; Faulkner, Guy; Beauchamp, Mark; Nilsson, Michael; Kelly, Paul; Smith, Jordan; Raine, Lauren; Biddle, Stuart

2016-09-01

Physical activity can improve cognitive and mental health, but the underlying mechanisms have not been established. To present a conceptual model explaining the mechanisms for the effect of physical activity on cognitive and mental health in young people and to conduct a systematic review of the evidence. Six electronic databases (PubMed, PsycINFO, SCOPUS, Ovid Medline, SportDiscus, and Embase) were used. School-, home-, or community-based physical activity intervention or laboratory-based exercise interventions were assessed. Studies were eligible if they reported statistical analyses of changes in the following: (1) cognition or mental health; and (2) neurobiological, psychosocial, and behavioral mechanisms. Data relating to methods, assessment period, participant characteristics, intervention type, setting, and facilitator/delivery were extracted. Twenty-five articles reporting results from 22 studies were included. Mechanisms studied were neurobiological (6 studies), psychosocial (18 studies), and behavioral (2 studies). Significant changes in at least 1 potential neurobiological mechanism were reported in 5 studies, and significant effects for at least 1 cognitive outcome were also found in 5 studies. One of 2 studies reported a significant effect for self-regulation, but neither study reported a significant impact on mental health. Small number of studies and high levels of study heterogeneity. The strongest evidence was found for improvements in physical self-perceptions, which accompanied enhanced self-esteem in the majority of studies measuring these outcomes. Few studies examined neurobiological and behavioral mechanisms, and we were unable to draw conclusions regarding their role in enhancing cognitive and mental health. Copyright © 2016 by the American Academy of Pediatrics.

Viscoplastic Characterization of Ti-6-4: Experiments

NASA Technical Reports Server (NTRS)

Lerch, Bradley A.; Arnold, Steven M.

2016-01-01

As part of a continued effort to improve the understanding of material time-dependent response, a series of mechanical tests have been conducted on the titanium alloy, Ti-6Al-4V. Tensile, creep, and stress relaxation tests were performed over a wide range of temperatures and strain rates to engage various amounts of time-dependent behavior. Additional tests were conducted that involved loading steps, overloads, dwell periods, and block loading segments to characterize the interaction between plasticity and time-dependent behavior. These data will be used to characterize a recently developed, viscoelastoplastic constitutive model with a goal toward better estimates of aerospace component behavior, resulting in improved safety.

The effect of wealth-based anti-expectation behaviors on public cooperation

NASA Astrophysics Data System (ADS)

Wang, Le; Chen, Tong; You, Xinshang; Wang, Yongjie

2018-03-01

Wealth difference is a common sense in our society. It is unreasonable to assume people have the same capability to donate money to the common pool in public goods game (PGG). Individuals have behavioral expectation towards their neighbors. In this paper, we introduce wealth-based anti-expectation mechanism to explore cooperation. Through numerical simulation results, we are glad to find that the anti-expectation mechanism could stimulate cooperation when the positive effects are equal to or larger than the negative effects from anti-expectation behaviors. Based on this mechanism, we propose propagation mechanism which aims to propagate the positive effects from the poor to inspire more people to choose cooperative strategies. When individuals are tolerant towards defectors, The fraction of cooperators increases with the increment of propagation distance. Enlarging the distance is not wise when individuals are harsh towards defectors. Additionally, we find that the more tolerant towards defectors we are, the higher the cooperation rate is in general. Therefore in PGG, we could consider one's anti-expectation towards others' behaviors and improve cooperation by propagating the poor's anti-expectation effects.

Growth and change in attention problems, disruptive behavior, and achievement from kindergarten to fifth grade.

PubMed

Claessens, Amy; Dowsett, Chantelle

2014-12-01

Despite widespread interest in children's adjustment problems, existing research does not provide conclusive evidence regarding the direction of the associations of achievement with classroom attention problems and disruptive behavior over the course of elementary school. Using a nationally representative sample of 16,260 kindergarteners, this study examined the temporal sequence of achievement, classroom attention problems, and disruptive behavior, focusing on how changes in skills and problems unfold across key periods between kindergarten and fifth grade. Results indicate that improvements in attention during the earliest years of schooling predict achievement gains through third grade. However, changes in disruptive behavior do not predict subsequent changes in achievement. Evidence linking changes in achievement to changes in classroom attention problems and disruptive behavior was less consistent. These findings point to the need to develop and examine early interventions that can improve attention skills as a mechanism for improving children's academic trajectories in elementary school. © The Author(s) 2014.

Developmental effects of antiepileptic drugs and the need for improved regulations

PubMed Central

Loring, David W.

2016-01-01

Antiepileptic drugs (AEDs) are among the most common teratogenic drugs prescribed to women of childbearing age. AEDs can induce both anatomical (malformations) and behavioral (cognitive/behavioral deficits) teratogenicity. Only in the last decade have we begun to truly discriminate differential AED developmental effects. Fetal valproate exposure carries a special risk for both anatomical and behavioral teratogenic abnormalities, but the mechanisms and reasons for individual variability are unknown. Intermediate anatomical risks exist for phenobarbital and topiramate. Several AEDs (e.g., lamotrigine and levetiracetam) appear to possess low risks for both anatomical and behavioral teratogenesis. Despite advances in the past decade, our knowledge of the teratogenic risks for most AEDs and the underlying mechanisms remain inadequate. Further, the long-term effects of AEDs in neonates and older children remain uncertain. The pace of progress is slow given the lifelong consequences of diminished developmental outcomes, exposing children unnecessarily to potential adverse effects. It is imperative that new approaches be employed to determine risks more expediently. Our recommendations include a national reporting system for congenital malformations, federal funding of the North American AED Pregnancy Registry, routine meta-analyses of cohort studies to detect teratogenic signals, monitoring of AED prescription practices for women, routine preclinical testing of all new AEDs for neurodevelopmental effects, more specific Food and Drug Administration requirements to establish differential AED cognitive effects in children, and improved funding of basic and clinical research to fully delineate risks and underlying mechanisms for AED-induced anatomical and behavioral teratogenesis. PMID:26519545

Different mechanisms of risperidone result in improved interpersonal trust, social engagement and cooperative behavior in patients with schizophrenia compared to trifluoperazine.

PubMed

Tse, Wai Shing; Wong, Ann Siu Wah; Chan, Fu; Pang, Alfred Hin Tat; Bond, Alyson Jane; Chan, Chau Kiu Raymond

2016-05-01

Atypical antipsychotic treatment (e.g. risperidone) has been found to improve social functioning more than standard antipsychotic treatment. However, it is unclear which specific social behaviors are implicated in this improvement. The current study employed an interactive puzzle game to examine how social behaviors contribute to the improvement of social functioning by comparing patients receiving risperidone with those receiving trifluoperazine. Scores on the Positive and Negative Syndrome Scale, executive functioning, and social functioning were obtained from 24 patients with schizophrenia receiving either risperidone (n = 12) or trifluoperazine (n = 12), before their social behavior was measured in the interactive Tangrams Game. Immediately after the Tangrams Game, participants filled in two questionnaires measuring their interpersonal trust and rejection toward their game partner. Patients receiving risperidone showed more social engagement, cooperative behavior and interpersonal trust toward their game partners than those receiving trifluoperazine. Additional multivariate analysis of variance revealed that lower affiliative behavior was a function of positive symptoms; interpersonal trust had an impact on social engagement but executive functioning did not explain lower interpersonal trust or social disengagement. Improvement of social competence by risperidone might be related to the enhancement of both social behaviors and interpersonal trust as well as better symptom resolution. © 2016 The Authors. Psychiatry and Clinical Neurosciences © 2016 Japanese Society of Psychiatry and Neurology.

Improving perceptions of cognitive-behavioral therapy with brief website exposure: Does neuroscientific allure impact attitudes?

PubMed

Schofield, Casey A; Weis, Henry; Ponzini, Gabriella; McHugh, R Kathryn

2017-12-01

The current study aimed to determine whether brief exposure to a webpage about cognitive-behavioral therapy (CBT) for the anxiety disorders improved knowledge and perceptions of this treatment. Further, this study tested whether participants were uniquely compelled by CBT if the mechanism of change cited neurological processes. Participants (N = 389) recruited online viewed a webpage screenshot that described CBT for anxiety. Participants were randomized to view a version of the webpage which either described the mechanism of change as: 1) psychological, 2) neurological, 3) combination of neurological and psychological, or 4) no mechanism described. Participants completed measures of knowledge and perception of CBT before and after viewing the webpage. Credibility ratings and symptoms were assessed after viewing the webpage. Knowledge of CBT was limited and perceptions were largely neutral to somewhat positive at baseline. Both knowledge and perceptions of CBT meaningfully improved after viewing the webpage. Mechanism of change did not impact perceptions of CBT or its credibility, though in the neurological and combination conditions there was less improvement in knowledge than in the psychological or control conditions. Greater symptoms of anxiety were associated with slightly less improvement in knowledge and perceptions. The study did not include long-term follow up, so the durability of the effects is unknown. Further, sample homogeneity undermines broad generalizability. There is significant room and capacity to improve lay-people's knowledge and perceptions of CBT. Neurological explanations did not appear to uniquely promote the perception of CBT or its credibility. Copyright © 2017. Published by Elsevier Ltd.

Elevated temperature mechanical behavior of monolithic and SiC whisker-reinforced silicon nitrides

NASA Technical Reports Server (NTRS)

Salem, Jonathan A.; Choi, Sung R.; Sanders, William A.; Fox, Dennis S.

1991-01-01

The mechanical behavior of a 30 volume percent SiC whisker reinforced silicon nitride and a similar monolithic silicon nitride were measured at several temperatures. Measurements included strength, fracture toughness, crack growth resistance, dynamic fatigue susceptibility, post oxidation strength, and creep rate. Strength controlling defects were determined with fractographic analysis. The addition of SiC whiskers to silicon nitride did not substantially improve the strength, fracture toughness, or crack growth resistance. However, the fatigue resistance, post oxidation strength, and creep resistance were diminished by the whisker addition.

Acute effects of nicotine on processing of complex stimuli in smokers and nonsmokers

NASA Astrophysics Data System (ADS)

Harkrider, Ashley; Hedrick, Mark

2004-05-01

Effects of nicotine in the auditory system of normal-hearing smokers and nonsmokers were investigated both behaviorally and physiologically. Discrimination of consonant-vowel speech in quiet and noise was assessed in the presence and absence of a transdermal nicotine patch by measuring categorical boundaries and mismatch negativity (MMN). Data indicate that the effects of nicotine on both behavioral and physiological measures increased with an increase in severity of nicotine-induced symptoms. Smokers showed improved CV discrimination in quiet and noise with nicotine. Additionally, smokers exhibited more measurable and significantly sharper boundaries as well as larger MMN areas than nonsmokers in quiet and noise for both placebo and nicotine sessions. MMN data acquired for both quiet and noise, and behavioral data acquired in quiet, indicate that smokers show the greatest improvements in discrimination during nicotine exposure, followed by symptomatic nonsmokers. Asymptomatic nonsmokers show little improvement with nicotine and, on occasion, show decrements in performance. These data may contribute to our understanding of the role of nAChRs in the auditory system, the neural mechanisms that underlie the recognition of sound in quiet and noise, and mechanisms mediating improved information processing and enhanced cognitive performance that serve as reinforcement for continued tobacco use by smokers.

Modeling Online Health Information-Seeking Behavior in China: The Roles of Source Characteristics, Reward Assessment, and Internet Self-Efficacy.

PubMed

Cao, Weidan; Zhang, Xinyao; Xu, Kaibin; Wang, Yuanxin

2016-09-01

The outbreak of severe acute respiratory syndrome (SARS) in 2003 marked the explosion of health information seeking online in China and the increasing emergence of Chinese health websites. There are both benefits and potential hazards of people's online health information seeking. This article intended to test part of Wilson's second model of information behavior, including source characteristics and activating mechanisms, and to identify the relationships among perceived access, perceived expertise credibility, reward assessment, Internet self-efficacy, and online health information-seeking behavior. Data were drawn from face-to-face surveys and an online survey of health information seekers (N = 393) in China. The results showed that source characteristics predicted activating mechanisms, which in turn predicted online health information-seeking behavior. Activating mechanisms, that is, reward assessment and Internet self-efficacy, mediated the relationship between source characteristics (i.e., access and credibility) and online health information-seeking behavior. Strategies for improving information access, expertise credibility, and Internet self-efficacy are discussed in order to maximize the benefits of online health information seeking and to minimize the potential harm.

Improvement of Anisotropic Mechanical Behavior by Sulfide Control in Quenched and Tempered 4340 Steel

NASA Astrophysics Data System (ADS)

Jung, Jae-Hoon; Shin, Jung-Ho; Lee, Seok-Jae

2015-07-01

The anisotropic mechanical behavior of quenched and tempered 4340 steel with different Ca contents was investigated by means of a macro/micrograph analysis, Charpy impact test, and rotating bending fatigue test. The 4340 steel with Ca added formed small spherical (Ca,Mn)S inclusions and effectively decreased both the inclusion size and the aspect ratio (length to width) of the MnS inclusions as compared to the Ca-free 4340 steel. The anisotropic impact value and fatigue strength were effectively improved due to the Ca addition that prevented the growth of MnS inclusions, which provided increased resistance against deformation to maintain a spherical shape because the elongated MnS inclusions acted as a crack propagation path and promoted the crack propagation due to higher stress concentrations.

Mechanical stress modified ferroelectric aging behavior

NASA Astrophysics Data System (ADS)

Xu, Tingting; Kan, Yi; Jin, Yaming; Sun, Hui; Du, Yingchao; Wu, Xiumei; Bo, Huifeng; Cai, Wei; Huang, Fengzhen; Lu, Xiaomei; Zhu, Jinsong

2013-05-01

Mechanical stress effect on aging behavior of Bi3.25La0.75Ti3O12 (BLT) and PbZr0.53Ti0.47O3 (PZT) films was investigated. It is found that the remnant polarization decreases with time while the coercive field increases in stress-free BLT films. For unconfined PZT films, both the remnant polarization and the coercive field decrease as time elapses. The applied tensile stress weakens the aging of remnant polarization of BLT films but strengthens the aging of coercive field, while the applied tensile stress possesses opposite effect. In contrary, the applied compressive stress simultaneously improves the aging behavior of both remnant polarization and coercive field of PZT films. Mechanical-stress-induced variation of domain wall mobility in different materials was suggested as the possible origin of these observations. This work indicates that the aging behavior modification using stress could be realized, and it is helpful for promoting the reliability of ferroelectric films for industrial applications.

Verhalten und Neurobiologie von stimmbegabten Insekten

NASA Astrophysics Data System (ADS)

Huber, Franz

1992-09-01

Crickets, tettigoniids (bush crickets or long-horned grasshoppers) and acridids (short-horned grasshoppers) are well-suited animals to study acoustically mediated behavior and to search for the underlying sensory, nervous, and effector mechanisms. Several behavioral tactics are described which improve reproductive success, serve to avoid predators such as bats, or have been developed for defence against parasitic insects. Phonotactic orientation of female crickets toward the calling male was chosen, since for this behavior the underlying sensory and nervous mechanisms have been intensively studied. Song recognition was found to be based on one critical parameter of the song, the syllable period, and the females show a bandpass behavior for which a correlate exists in local brain neurons. Sound orientation is based on a pressure gradient mechanism in each ear, and it needs a binaural intensity comparison within the central nervous system. With intracellular recordings from auditory interneurons during phonotactic orientation and their manipulation, a cellular correlate could be found which obeys the rule “ turn to the side most strongly stimulated”.

Recent advances in behavioral addiction treatments: focusing on mechanisms of change.

PubMed

Longabaugh, Richard; Magill, Molly

2011-10-01

In the latter half of the 20th century, research on behavioral treatments for addictions aimed to develop and test effective treatments. Among the treatments found to be at least moderately effective, direct comparisons failed to reveal consistent superiority of one approach over another. This ubiquitous finding held true despite underlying theories that differed markedly in their proposed causal processes related to patient change. In the 21st century, the focus of treatment research is increasingly on how treatment works for whom rather than whether it works. Studies of active treatment ingredients and mechanisms of behavioral change, while promising, have yielded inconsistent results. Simple mediation analysis may need to be expanded via inclusion of models testing for moderated mediation, mediated moderation, and conditional indirect effects. Examples are offered as to how these more complex models can lead to increased understanding of the conditions under which specific treatment interventions will be effective and mechanisms of change operative in improving behavioral treatments for addictions.

Recent Advances in Behavioral Addiction Treatments: Focusing on Mechanisms of Change

PubMed Central

Longabaugh, Richard; Magill, Molly

2012-01-01

In the latter half of the 20th century, research on behavioral treatments for addictions aimed to develop and test effective treatments. Among treatments found to be at least moderately effective, direct comparisons failed to reveal consistent superiority of one approach over another. This ubiquitous finding held true despite underlying theories that differed markedly in their proposed causal processes related to patient change. In the 21st century the focus of treatment research is increasingly on how treatment works for whom, rather than whether it works. Studies of active treatment ingredients and mechanisms of behavioral change, while promising, have yielded inconsistent results. Simple mediation analysis may need to be expanded by inclusion of models testing for moderated mediation, mediated moderation, and conditional indirect effects. Examples are offered as to how these more complex models can lead to increased understanding of the conditions under which specific treatment interventions will be effective and mechanisms of change operative in improving behavioral treatments for addictions. PMID:21750958

Effects of Heat Treatment on Tribological Behavior of Electroless Ni-B Coating at Elevated Temperatures

NASA Astrophysics Data System (ADS)

Mukhopadhyay, Arkadeb; Barman, Tapan Kumar; Sahoo, Prasanta

The present work investigates the effects of heat treatment on friction and wear behavior of electroless Ni-B coatings at elevated temperatures. Coating is deposited on AISI 1040 steel specimens and subjected to heat treatments at 350∘C, 400∘C and 450∘C. Coating characterization is done using scanning electron microscope, energy dispersive X-Ray analysis and X-Ray diffraction analysis. Improvement in microhardness is observed for the heat treated deposits. Further, the effect of heat treatment on the tribological behavior of the coatings at room temperature, 100∘C, 300∘C and 500∘C are analyzed on a pin-on-disc setup. Heat treatment at 350∘C causes a significant improvement in the tribological behavior at elevated temperatures. Higher heat treatment temperatures cause deterioration in the wear resistance and coefficient of friction. The wear mechanism at 100∘C is observed to be predominantly adhesive along with abrasion. While at 300∘C, abrasive wear is seen to be the governing wear phenomenon. Formation of mechanically mixed layers is noticed at both the test temperatures of 100∘C and 300∘C for the coatings heat treated at 400∘C and 450∘C test temperature. The predominant wear mechanisms at 500∘C are abrasive and fatigue for as-deposited and heat treated coatings, respectively.

A behavior change model for internet interventions.

PubMed

Ritterband, Lee M; Thorndike, Frances P; Cox, Daniel J; Kovatchev, Boris P; Gonder-Frederick, Linda A

2009-08-01

The Internet has become a major component to health care and has important implications for the future of the health care system. One of the most notable aspects of the Web is its ability to provide efficient, interactive, and tailored content to the user. Given the wide reach and extensive capabilities of the Internet, researchers in behavioral medicine have been using it to develop and deliver interactive and comprehensive treatment programs with the ultimate goal of impacting patient behavior and reducing unwanted symptoms. To date, however, many of these interventions have not been grounded in theory or developed from behavior change models, and no overarching model to explain behavior change in Internet interventions has yet been published. The purpose of this article is to propose a model to help guide future Internet intervention development and predict and explain behavior changes and symptom improvement produced by Internet interventions. The model purports that effective Internet interventions produce (and maintain) behavior change and symptom improvement via nine nonlinear steps: the user, influenced by environmental factors, affects website use and adherence, which is influenced by support and website characteristics. Website use leads to behavior change and symptom improvement through various mechanisms of change. The improvements are sustained via treatment maintenance. By grounding Internet intervention research within a scientific framework, developers can plan feasible, informed, and testable Internet interventions, and this form of treatment will become more firmly established.

Effect of friction stir processing on tribological properties of Al-Si alloys

NASA Astrophysics Data System (ADS)

Aktarer, S. M.; Sekban, D. M.; Yanar, H.; Purçek, G.

2017-02-01

As-cast Al-12Si alloy was processed by single-pass friction stir processing (FSP), and its effect on mainly friction and wear properties of processed alloy was studied in detail. The needle-shaped eutectic silicon particles were fragmented by intense plastic deformation and dynamic recrystallization during FSP. The fragmented and homogenously distributed Si particles throughout the improve the mechanical properties and wear behavior of Al-12Si alloy. The wear mechanisms for this improvement were examined and the possible reasons were discussed.

Exploring the Feasibility of Reputation Models for Improving P2P Routing under Churn

NASA Astrophysics Data System (ADS)

Sànchez-Artigas, Marc; García-López, Pedro; Herrera, Blas

Reputation mechanisms help peer-to-peer (P2P) networks to detect and avoid unreliable or uncooperative peers. Recently, it has been discussed that routing protocols can be improved by conditioning routing decisions to the past behavior of forwarding peers. However, churn — the continuous process of node arrival and departure — may severely hinder the applicability of rating mechanisms. In particular, short lifetimes mean that reputations are often generated from a small number of transactions.

Dynamic behaviors of various volume rate steel-fiber reinforced reactive powder concrete after high temperature burnt

NASA Astrophysics Data System (ADS)

Pang, Baojun; Wang, Liwen; Yang, Zhenqi; Chi, Runqiang

2009-06-01

Dynamic strain-stress curves of reactive powder concrete under high strain rate (10/s-100/s) were determined by improved split Hopkinson pressure bar (SHPB) system. A plumbum pulse shaper was used to ensure the symmetrical stress in the specimens before fracture and avoid the fluctuation of test data due to input shaky stress pulse. A time modified method was induced for data processing in order to get accurate SHPB results. The results of experiment showed after high temperature burnt, different volume rate (0.0%, 0.5%, 1.0%, 1.5%) steel-fiber reinforced reactive power concrete had the same changing tendency of residual mechanics behaviors, e.g. after 400 centigrade burnt, the residual compression strength was about 70% of material strength without burnt under 100/s. After 800 centigrade burnt, the compression strength is about 30% under 100/s while the deformation ability increased. At meanwhile, steel fiber had improved the mechanism of reinforcing effect and toughening effect of concrete material after burnt. With increasing of steel fiber volume rate, dynamic residual behavior of samples was improved. Microcosmic characteristics and energy absorption were induced for explaining the experiment results.

Mechanical behavior and shape optimization of lining structure for subsea tunnel excavated in weathered slot

NASA Astrophysics Data System (ADS)

Li, Peng-fei; Zhou, Xiao-jun

2015-12-01

Subsea tunnel lining structures should be designed to sustain the loads transmitted from surrounding ground and groundwater during excavation. Extremely high pore-water pressure reduces the effective strength of the country rock that surrounds a tunnel, thereby lowering the arching effect and stratum stability of the structure. In this paper, the mechanical behavior and shape optimization of the lining structure for the Xiang'an tunnel excavated in weathered slots are examined. Eight cross sections with different geometric parameters are adopted to study the mechanical behavior and shape optimization of the lining structure. The hyperstatic reaction method is used through finite element analysis software ANSYS. The mechanical behavior of the lining structure is evidently affected by the geometric parameters of crosssectional shape. The minimum safety factor of the lining structure elements is set to be the objective function. The efficient tunnel shape to maximize the minimum safety factor is identified. The minimum safety factor increases significantly after optimization. The optimized cross section significantly improves the mechanical characteristics of the lining structure and effectively reduces its deformation. Force analyses of optimization process and program are conducted parametrically so that the method can be applied to the optimization design of other similar structures. The results obtained from this study enhance our understanding of the mechanical behavior of the lining structure for subsea tunnels. These results are also beneficial to the optimal design of lining structures in general.

Rheological and mechanical properties of polypropylene prepared with multi-walled carbon nanotube masterbatch.

PubMed

Shim, Young-Sun; Park, Soo-Jin

2012-07-01

In this study, the effects of polypropylene-grafted maleic-anhydride-treated multi-walled carbon nanotubes (PP-MWNTs) on the viscoelastic behaviors and mechanical properties of a polypropylene-(PP)-based composite system were examined. The PP-MWNT/PP composites were prepared via melt mixing with a 3:1 ratio of PP-g-MA and acid-treated MWNTs at 220 degrees C. The surface characteristics of the PP-MWNTs were confirmed via Fourier transform infrared (FTIR) spectroscopy and transmission electron microscopy (TEM). The viscoelastic behavior and mechanical properties of the PP-MWNT/PP composites were confirmed using a rheometer and an ultimate testing machine (UTM). The storage and loss moduli increased with increasing PP-MWNT content. The critical intensity stress factor (K(IC)) of the PP-MWNT/PP composites at high filler loading was also higher than that of the MWNT/PP composites. In conclusion, the viscoelastic behavior and mechanical properties of MWNT/PP can be improved by grafting MWNTs to PP-g-MA.

Body image change and improved eating self-regulation in a weight management intervention in women

PubMed Central

2011-01-01

Background Successful weight management involves the regulation of eating behavior. However, the specific mechanisms underlying its successful regulation remain unclear. This study examined one potential mechanism by testing a model in which improved body image mediated the effects of obesity treatment on eating self-regulation. Further, this study explored the role of different body image components. Methods Participants were 239 overweight women (age: 37.6 ± 7.1 yr; BMI: 31.5 ± 4.1 kg/m2) engaged in a 12-month behavioral weight management program, which included a body image module. Self-reported measures were used to assess evaluative and investment body image, and eating behavior. Measurements occurred at baseline and at 12 months. Baseline-residualized scores were calculated to report change in the dependent variables. The model was tested using partial least squares analysis. Results The model explained 18-44% of the variance in the dependent variables. Treatment significantly improved both body image components, particularly by decreasing its investment component (f2 = .32 vs. f2 = .22). Eating behavior was positively predicted by investment body image change (p < .001) and to a lesser extent by evaluative body image (p < .05). Treatment had significant effects on 12-month eating behavior change, which were fully mediated by investment and partially mediated by evaluative body image (effect ratios: .68 and .22, respectively). Conclusions Results suggest that improving body image, particularly by reducing its salience in one's personal life, might play a role in enhancing eating self-regulation during weight control. Accordingly, future weight loss interventions could benefit from proactively addressing body image-related issues as part of their protocols. PMID:21767360

Body image change and improved eating self-regulation in a weight management intervention in women.

PubMed

Carraça, Eliana V; Silva, Marlene N; Markland, David; Vieira, Paulo N; Minderico, Cláudia S; Sardinha, Luís B; Teixeira, Pedro J

2011-07-18

Successful weight management involves the regulation of eating behavior. However, the specific mechanisms underlying its successful regulation remain unclear. This study examined one potential mechanism by testing a model in which improved body image mediated the effects of obesity treatment on eating self-regulation. Further, this study explored the role of different body image components. Participants were 239 overweight women (age: 37.6 ± 7.1 yr; BMI: 31.5 ± 4.1 kg/m²) engaged in a 12-month behavioral weight management program, which included a body image module. Self-reported measures were used to assess evaluative and investment body image, and eating behavior. Measurements occurred at baseline and at 12 months. Baseline-residualized scores were calculated to report change in the dependent variables. The model was tested using partial least squares analysis. The model explained 18-44% of the variance in the dependent variables. Treatment significantly improved both body image components, particularly by decreasing its investment component (f² = .32 vs. f² = .22). Eating behavior was positively predicted by investment body image change (p < .001) and to a lesser extent by evaluative body image (p < .05). Treatment had significant effects on 12-month eating behavior change, which were fully mediated by investment and partially mediated by evaluative body image (effect ratios: .68 and .22, respectively). Results suggest that improving body image, particularly by reducing its salience in one's personal life, might play a role in enhancing eating self-regulation during weight control. Accordingly, future weight loss interventions could benefit from proactively addressing body image-related issues as part of their protocols.

An application of interactive computer graphics technology to the design of dispersal mechanisms

NASA Technical Reports Server (NTRS)

Richter, B. J.; Welch, B. H.

1977-01-01

Interactive computer graphics technology is combined with a general purpose mechanisms computer code to study the operational behavior of three guided bomb dispersal mechanism designs. These studies illustrate the use of computer graphics techniques to discover operational anomalies, to assess the effectiveness of design improvements, to reduce the time and cost of the modeling effort, and to provide the mechanism designer with a visual understanding of the physical operation of such systems.

Ductility and fracture in B2 FeAl alloys. Ph.D. Thesis Final Report

NASA Technical Reports Server (NTRS)

Crimp, Martin A.

1987-01-01

The mechanical behavior of B2FeAl alloys was studied. Stoichiometric Fe-50Al exhibits totally brittle behavior while iron-rich Fe-40Al yields and displays about 3% total strain. This change in behavior results from large decreases in the yield strength with iron-rich deviations from stoichiometry while the fracture stress remains essentially constant. Single crystal studies show that these yield strength decreases are directly related to decreases in the critical resolved shear stress for a group of zone axes /111/ set of (110) planes slip. This behavior is rationalized in terms of the decrease in antiphase boundary energy with decreasing aluminum content. The addition of boron results in improvements in the mechanical behavior of alloys on the iron-rich side of stoichiometry. These improvements are increased brittle fracture stresses of near-stoichiometric alloys, and enhanced ductility of up to 6% in Fe-40Al. These effects were attributed to increased grain boundary adhesion as reflected by changes in fracture mode from intergranular to transgranular failure. The increases in yield strength, which are observed in both polycrystals and single crystals, result from the quenching in of large numbers of thermal vacancies. Hall-Petch plots show that the cooling rate effects are a direct result of changes in the Hall-Petch intercept/lattice resistance flow.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhang, Chao; Xu, Jun; Cao, Lei

The electrodes of lithium-ion batteries (LIB) are known to be brittle and to fail earlier than the separators during an external crush event. Thus, the understanding of mechanical failure mechanism for LIB electrodes (anode and cathode) is critical for the safety design of LIB cells. In this paper, we present experimental and numerical studies on the constitutive behavior and progression of failure in LIB electrodes. Mechanical tests were designed and conducted to evaluate the constitutive properties of porous electrodes. Constitutive models were developed to describe the stress-strain response of electrodes under uniaxial tensile and compressive loads. The failure criterion andmore » a damage model were introduced to model their unique tensile and compressive failure behavior. The failure mechanism of LIB electrodes was studied using the blunt rod test on dry electrodes, and numerical models were built to simulate progressive failure. The different failure processes were examined and analyzed in detail numerically, and correlated with experimentally observed failure phenomena. Finally, the test results and models improve our understanding of failure behavior in LIB electrodes, and provide constructive insights on future development of physics-based safety design tools for battery structures under mechanical abuse.« less

LARGE STRAIN STIMULATION PROMOTES EXTRACELLULAR MATRIX PRODUCTION AND STIFFNESS IN AN ELASTOMERIC SCAFFOLD MODEL

PubMed Central

D’more, Antonio; Soares, Joao; Stella, John A.; Zhang, Will; Amoroso, Nicholas J.; Mayer, John E.; Wagner, William R.; Sacks, Michael S.

2016-01-01

Mechanical conditioning of engineered tissue constructs is widely recognized as one of the most relevant methods to enhance tissue accretion and microstructure, leading to improved mechanical behaviors. The understanding of the underlying mechanisms remains rather limited, restricting the development of in silico models of these phenomena, and the translation of engineered tissues into clinical application. In the present study, we examined the role of large strip-biaxial strains (up to 50%) on ECM synthesis by vascular smooth muscle cells (VSMCs) micro-integrated into electrospun polyester urethane urea (PEUU) constructs over the course of 3 weeks. Experimental results indicated that VSMC biosynthetic behavior was quite sensitive to tissue strain maximum level, and that collagen was the primary ECM component synthesized. Moreover, we found that while a 30% peak strain level achieved maximum ECM synthesis rate, further increases in strain level lead to a reduction in ECM biosynthesis. Subsequent mechanical analysis of the formed collagen fiber network was performed by removing the scaffold mechanical responses using a strain-energy based approach, showing that the de-novo collagen also demonstrated mechanical behaviors substantially better than previously obtained with small strain training and comparable to mature collagenous tissues. We conclude that the application of large deformations can play a critical role not only in the quantity of ECM synthesis (i.e. the rate of mass production), but also on the modulation of the stiffness of the newly formed ECM constituents. The improved understanding of the process of growth and development of ECM in these mechano-sensitive cell-scaffold systems will lead to more rational design and manufacturing of engineered tissues operating under highly demanding mechanical environments. PMID:27344402

Microstructure and Mechanical Behavior of Porous Ti–6Al–4V Processed by Spherical Powder Sintering

PubMed Central

Reig, Lucía; Tojal, Concepción; Busquets, David J.; Amigó, Vicente

2013-01-01

Reducing the stiffness of titanium is an important issue to improve the behavior of this material when working together with bone, which can be achieved by generating a porous structure. The aim of this research was to analyze the porosity and mechanical behavior of Ti–6Al–4V porous samples developed by spherical powder sintering. Four different microsphere sizes were sintered at temperatures ranging from 1300 to 1400 °C for 2, 4 and 8 h. An open, interconnected porosity was obtained, with mean pore sizes ranging from 54.6 to 140 µm. The stiffness of the samples diminished by as much as 40% when compared to that of solid material and the mechanical properties were affected mainly by powder particles size. Bending strengths ranging from 48 to 320 MPa and compressive strengths from 51 to 255 MPa were obtained. PMID:28788365

Microstructure and Mechanical Behavior of Porous Ti-6Al-4V Processed by Spherical Powder Sintering.

PubMed

Reig, Lucía; Tojal, Concepción; Busquets, David J; Amigó, Vicente

2013-10-23

Reducing the stiffness of titanium is an important issue to improve the behavior of this material when working together with bone, which can be achieved by generating a porous structure. The aim of this research was to analyze the porosity and mechanical behavior of Ti-6Al-4V porous samples developed by spherical powder sintering. Four different microsphere sizes were sintered at temperatures ranging from 1300 to 1400 °C for 2, 4 and 8 h. An open, interconnected porosity was obtained, with mean pore sizes ranging from 54.6 to 140 µm. The stiffness of the samples diminished by as much as 40% when compared to that of solid material and the mechanical properties were affected mainly by powder particles size. Bending strengths ranging from 48 to 320 MPa and compressive strengths from 51 to 255 MPa were obtained.

High Fidelity Ion Beam Simulation of High Dose Neutron Irradiation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Was, Gary; Wirth, Brian; Motta, Athur

The objective of this proposal is to demonstrate the capability to predict the evolution of microstructure and properties of structural materials in-reactor and at high doses, using ion irradiation as a surrogate for reactor irradiations. “Properties” includes both physical properties (irradiated microstructure) and the mechanical properties of the material. Demonstration of the capability to predict properties has two components. One is ion irradiation of a set of alloys to yield an irradiated microstructure and corresponding mechanical behavior that are substantially the same as results from neutron exposure in the appropriate reactor environment. Second is the capability to predict the irradiatedmore » microstructure and corresponding mechanical behavior on the basis of improved models, validated against both ion and reactor irradiations and verified against ion irradiations. Taken together, achievement of these objectives will yield an enhanced capability for simulating the behavior of materials in reactor irradiations.« less

Effectiveness of Fiber Reinforcement on the Mechanical Properties and Shrinkage Cracking of Recycled Fine Aggregate Concrete.

PubMed

Nam, Jeongsoo; Kim, Gyuyong; Yoo, Jaechul; Choe, Gyeongcheol; Kim, Hongseop; Choi, Hyeonggil; Kim, Youngduck

2016-02-26

This paper presents an experimental study conducted to investigate the effect of fiber reinforcement on the mechanical properties and shrinkage cracking of recycled fine aggregate concrete (RFAC) with two types of fiber-polyvinyl alcohol (PVA) and nylon. A small fiber volume fraction, such as 0.05% or 0.1%, in RFAC with polyvinyl alcohol or nylon fibers was used for optimum efficiency in minimum quantity. Additionally, to make a comparative evaluation of the mechanical properties and shrinkage cracking, we examined natural fine aggregate concrete as well. The test results revealed that the addition of fibers and fine aggregates plays an important role in improving the mechanical performance of the investigated concrete specimens as well as controlling their cracking behavior. The mechanical properties such as compressive strength, splitting tensile strength, and flexural strength of fiber-reinforced RFAC were slightly better than those of non-fiber-reinforced RFAC. The shrinkage cracking behavior was examined using plat-ring-type and slab-type tests. The fiber-reinforced RFAC showed a greater reduction in the surface cracks than non-fiber-reinforced concrete. The addition of fibers at a small volume fraction in RFAC is more effective for drying shrinkage cracks than for improving mechanical performance.

Effectiveness of Fiber Reinforcement on the Mechanical Properties and Shrinkage Cracking of Recycled Fine Aggregate Concrete

PubMed Central

Nam, Jeongsoo; Kim, Gyuyong; Yoo, Jaechul; Choe, Gyeongcheol; Kim, Hongseop; Choi, Hyeonggil; Kim, Youngduck

2016-01-01

This paper presents an experimental study conducted to investigate the effect of fiber reinforcement on the mechanical properties and shrinkage cracking of recycled fine aggregate concrete (RFAC) with two types of fiber—polyvinyl alcohol (PVA) and nylon. A small fiber volume fraction, such as 0.05% or 0.1%, in RFAC with polyvinyl alcohol or nylon fibers was used for optimum efficiency in minimum quantity. Additionally, to make a comparative evaluation of the mechanical properties and shrinkage cracking, we examined natural fine aggregate concrete as well. The test results revealed that the addition of fibers and fine aggregates plays an important role in improving the mechanical performance of the investigated concrete specimens as well as controlling their cracking behavior. The mechanical properties such as compressive strength, splitting tensile strength, and flexural strength of fiber-reinforced RFAC were slightly better than those of non-fiber-reinforced RFAC. The shrinkage cracking behavior was examined using plat-ring-type and slab-type tests. The fiber-reinforced RFAC showed a greater reduction in the surface cracks than non-fiber-reinforced concrete. The addition of fibers at a small volume fraction in RFAC is more effective for drying shrinkage cracks than for improving mechanical performance. PMID:28773256

Cell-matrix mechanical interaction in electrospun polymeric scaffolds for tissue engineering: Implications for scaffold design and performance.

PubMed

Kennedy, Kelsey M; Bhaw-Luximon, Archana; Jhurry, Dhanjay

2017-03-01

Engineered scaffolds produced by electrospinning of biodegradable polymers offer a 3D, nanofibrous environment with controllable structural, chemical, and mechanical properties that mimic the extracellular matrix of native tissues and have shown promise for a number of tissue engineering applications. The microscale mechanical interactions between cells and electrospun matrices drive cell behaviors including migration and differentiation that are critical to promote tissue regeneration. Recent developments in understanding these mechanical interactions in electrospun environments are reviewed, with emphasis on how fiber geometry and polymer structure impact on the local mechanical properties of scaffolds, how altering the micromechanics cues cell behaviors, and how, in turn, cellular and extrinsic forces exerted on the matrix mechanically remodel an electrospun scaffold throughout tissue development. Techniques used to measure and visualize these mechanical interactions are described. We provide a critical outlook on technological gaps that must be overcome to advance the ability to design, assess, and manipulate the mechanical environment in electrospun scaffolds toward constructs that may be successfully applied in tissue engineering and regenerative medicine. Tissue engineering requires design of scaffolds that interact with cells to promote tissue development. Electrospinning is a promising technique for fabricating fibrous, biomimetic scaffolds. Effects of electrospun matrix microstructure and biochemical properties on cell behavior have been extensively reviewed previously; here, we consider cell-matrix interaction from a mechanical perspective. Micromechanical properties as a driver of cell behavior has been well established in planar substrates, but more recently, many studies have provided new insights into mechanical interaction in fibrillar, electrospun environments. This review provides readers with an overview of how electrospun scaffold mechanics and cell behavior work in a dynamic feedback loop to drive tissue development, and discusses opportunities for improved design of mechanical environments that are conducive to tissue development. Copyright © 2016 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Water Droplet Erosion Behavior of High-Power Diode Laser Treated 17Cr4Ni PH Stainless Steel

NASA Astrophysics Data System (ADS)

Mann, B. S.

2014-05-01

This article deals with water droplet erosion (WDE) behavior of high-power diode laser (HPDL) treated 17Cr4Ni PH stainless steel. After HPDL treatment, the water droplet erosion resistance (WDER) of 17Cr4Ni PH stainless steel has not improved. The main reason is the surface hardness, which has not improved after HPDL treatment though the microstructure has become much finer. On the other hand, precipitation hardening of the alloy at 490°C for 3 h has resulted in improved WDER more than twice. This is because of its increased microhardness and improved modified ultimate resilience (MUR), and formation of fine grained microstructure. The WDER has been correlated with MUR, a single mechanical property, based upon microhardness, ultimate tensile strength, and Young's modulus. WDERs of HPDL treated, untreated, and precipitation hardened 17Cr4Ni PH stainless steel samples were determined using a WDE test facility as per ASTM G73-1978. The WDE damage mechanism, compared on the basis of MUR and scanning electron micrographs, is discussed and reported in this article.

Psychosocial Approaches in the Treatment of Psychosis: Cognitive Behavior Therapy for Psychosis (CBTp) and Metacognitive Training (MCT).

PubMed

Menon, Mahesh; Balzan, Ryan P; Harper, Katy; Kumar, Devavrata; Andersen, Devon; Moritz, Steffen; Woodward, Todd S

Although antipsychotic medication has been the most widely used and efficacious treatment in ameliorating the symptoms of psychosis, there has been a growing realization that pharmacological treatment has limitations. A significant minority of individuals continue to show "treatment-resistant" symptoms and significant relapse risk, while others show symptom reduction without the corresponding improvement in social and role functioning. Psychotherapy, in combination with medication, can help with symptom reduction, as well as improve functioning and quality of life. In this paper, we focus on two modalities of psychotherapy which have been shown to improve symptomatology and functioning in individuals with psychosis: Cognitive Behavior Therapy for psychosis (CBTp) and Metacognitive Training (MCT). Both treatment approaches focus on increasing the individuals' understanding of the psychological mechanisms associated with delusions and hallucinations, and helping them develop strategies to improve reality testing and belief evaluation. We aim to provide an overview of both treatments, examining not only the theoretical mechanisms and efficacy of each approach, but also the common therapeutic components they share.

Mechanical evaluation of the resistance and elastance of post-burn scars after topical treatment with tretinoin

PubMed Central

Dematte, Maria Fernanda; Gemperli, Rolf; Salles, Alessandra Grassi; Dolhnikoff, Marisa; Lanças, Tatiana; Saldiva, Paulo Hilário Nascimento; Ferreira, Marcus Castro

2011-01-01

OBJECTIVE: After burn injuries, scarred skin lacks elasticity, especially in hypertrophic scars. Topical treatment with tretinoin can improve the appearance and quality of the skin (i.e., texture, distensibility, color, and hydration). The objective of this prospective study was to examine the effects of treatment with 0.05% tretinoin for one year on the biomechanical behavior and histological changes undergone by facial skin with post-burn scarring. Setting: Tertiary, Institutional. METHOD: Fifteen female patients who had suffered partial thickness burns with more than two years of evolution were selected. Skin biopsies were obtained initially and after one year of treatment. The resistance and elastance of these skin biopsies were measured using a mechanical oscillation analysis system. The density of collagen fibers, elastic fibers, and versican were determined using immunohistochemical analysis. RESULTS: Tretinoin treatment significantly lowered skin resistance and elastance, which is a result that indicates higher distensibility of the skin. However, tretinoin treatment did not significantly affect the density of collagen fibers, elastic fibers, or versican. CONCLUSION: Topical tretinoin treatment alters the mechanical behavior of post-burn scarred skin by improving its distensibility and thus leads to improved quality of life for patients. PMID:22086527

Mechanical evaluation of the resistance and elastance of post-burn scars after topical treatment with tretinoin.

PubMed

Dematte, Maria Fernanda; Gemperli, Rolf; Salles, Alessandra Grassi; Dolhnikoff, Marisa; Lanças, Tatiana; Saldiva, Paulo Hilário Nascimento; Ferreira, Marcus Castro

2011-01-01

After burn injuries, scarred skin lacks elasticity, especially in hypertrophic scars. Topical treatment with tretinoin can improve the appearance and quality of the skin (i.e., texture, distensibility, color, and hydration). The objective of this prospective study was to examine the effects of treatment with 0.05% tretinoin for one year on the biomechanical behavior and histological changes undergone by facial skin with post-burn scarring. Tertiary, Institutional. Fifteen female patients who had suffered partial thickness burns with more than two years of evolution were selected. Skin biopsies were obtained initially and after one year of treatment. The resistance and elastance of these skin biopsies were measured using a mechanical oscillation analysis system. The density of collagen fibers, elastic fibers, and versican were determined using immunohistochemical analysis. Tretinoin treatment significantly lowered skin resistance and elastance, which is a result that indicates higher distensibility of the skin. However, tretinoin treatment did not significantly affect the density of collagen fibers, elastic fibers, or versican. Topical tretinoin treatment alters the mechanical behavior of post-burn scarred skin by improving its distensibility and thus leads to improved quality of life for patients.

C-Coupon Studies of CMCS: Fracture Behavior and Microstructural Characterization

NASA Technical Reports Server (NTRS)

Hurwitz, Frances I.; Calomino, Anthony M.; McCue, Terry R.; Abdul-Aziz, Ali

2001-01-01

A curved beam 'C-coupon' was used to assess fracture behavior in a Sylramic(tm)/melt infiltration (MI) SiC matrix composite. Failure stresses and fracture mechanisms, as determined by optical and scanning electron microstructural analysis, are compared with finite element stress calculations to analyze failure modes. Material microstructure was found to have a strong influence on mechanical behavior. Fracture occurs in interlaminar tension (ILT), provided that the ratio of ILT to tensile strength for the material is less than the ratio of radial to hoop stresses for the C-coupon geometry. Utilization of 3D architectures to improve interlaminar strength requires significant development efforts to incorporate through thickness fibers in regions with high curvatures while maintaining uniform thickness, radius, and microstructure.

Supportive therapy for schizophrenia: possible mechanisms and implications for adjunctive psychosocial treatments.

PubMed

Penn, David L; Mueser, Kim T; Tarrier, Nick; Gloege, Andrew; Cather, Corrine; Serrano, Daniel; Otto, Michael W

2004-01-01

This article posits that the positive findings for supportive therapy (ST) in recent trials may indicate an important but undervalued aspect of psychosocial interventions for schizophrenia. In developing this thesis, we consider the possible mechanisms underlying the beneficial effects of ST observed in recent trials of cognitive behavioral therapy for schizophrenia. We place this evidence in the context of a review of psychological models of mental health, the therapeutic alliance, and research on social cognition and social support in schizophrenia. We conclude this article by describing a new theoretically driven intervention for schizophrenia, functional cognitive-behavioral therapy (FCBT), which improves functional outcomes by integrating evidence-based advances in cognitive behavioral therapy with the strengths of ST approaches.

The mechanical and electrochemical properties of bulk metallic glasses

NASA Astrophysics Data System (ADS)

Morrison, Mark Lee

The objectives of this study were to define and model the electrochemical and mechanical behaviors of BMGs, in addition to the interactions between these. The electrochemical behaviors of Zr-, Ti-, and Ca-based BMGs have been studied in various environments. Moreover, the electrochemical behaviors of several common, crystalline materials have also been characterized in the same environments to facilitate comparisons. Mechanical characterization of the Vitreloy 105 alloy was conducted through four-point bend fatigue testing, as well as tensile testing with in situ thermography. After the electrochemical and mechanical behaviors of the Vit 105 BMG alloy were defined separately, the corrosion-fatigue behavior of this alloy was studied. Corrosion-fatigue tests were conducted in a 0.6 M NaCl electrolyte, identical to one of the environments in which the electrochemical behavior was previously defined. The environmental effect was found to be significant at most stress levels, with decreasing effects at higher stress levels due to decreasing time in the detrimental environment, and severely depressed the corrosion-fatigue endurance limit. Cyclic-anodic-polarization tests were conducted during cyclic loading to elucidate the effect of cyclic stresses on the electrochemical behavior. It was found that a stress range of 900 MPa resulted in active pitting at the open-circuit potentials. The degradation mechanism was determined to be stress-assisted dissolution, not hydrogen embrittlement. Finally, tensile tests were conducted with the Vit 105 BMG alloy with in situ infrared (IR) thermography to observe the evolution of shear bands during deformation. More importantly, the length, location, sequence, temperature evolution, and velocity of individual shear bands have been quantified through the use of IR thermography. Based upon all of these studies on a variety of BMG alloy systems, the most important factor in the mechanical and electrochemical behavior was found to be material quality and homogeneity. Therefore, future research on the improvement of BMG alloys should be focused on this area.

Mechanical Properties and Fracture Behaviors of the As-Extruded Mg-5Al-3Ca Alloys Containing Yttrium at Elevated Temperature.

PubMed

Son, Hyeon-Taek; Kim, Yong-Ho; Kim, Taek-Soo; Lee, Seong-Hee

2016-02-01

Effects of yttrium (Y) addition on mechanical properties and fracture behaviors of the as-extruded Mg-Al-Ca based alloys at elevated temperature were investigated by a tensile test. After hot extrusion, the average grain size was refined by Y addition and eutectic phases were broken down into fine particles. Y addition to Mg-5Al-3Ca based alloy resulted in the improvement of strength and ductility at elevated temperature due to fine grain and suppression of grain growth by formation of thermally stable Al2Y intermetallic compound.

The influences of fluorine and process variations on polysilicon film stress and MOSFET hot carrier effects

NASA Technical Reports Server (NTRS)

Lowry, Lynn E.; Macwilliams, Kenneth P.; Isaac, Mary

1991-01-01

The use of fluorinated gate oxides may provide an improvement in nMOSFET reliability by enhancing hot carrier resistance. In order to clarify the mechanisms by which polysilicon processing and fluorination influence the oxide behavior, a matrix of nMOSFET structures was prepared using various processing, doping, and implantation strategies. These structures were evaluated for crystalline morphology and chemical element distribution. Mechanical stress measurements were taken on the polysilicon films from room temperature to cryogenic temperature. These examinations showed that fluorination of a structure with randomly oriented polysilicon can reduce residual mechanical stress and improve hot carrier resistance at room temperature.

Identifying the mechanisms through which behavioral weight-loss treatment improves food decision-making in obesity.

PubMed

Demos, Kathryn E; McCaffery, Jeanne M; Thomas, J Graham; Mailloux, Kimberly A; Hare, Todd A; Wing, Rena R

2017-07-01

Behavioral weight loss (BWL) programs are the recommended treatment for obesity, yet it is unknown whether these programs change one's ability to use self-control in food choices and what specific mechanisms support such change. Using experimental economics methods, we investigated whether changes in dietary behavior in individuals with obesity following BWL are driven by one or more of the following potential mechanisms: changes in the perception of the 1) health or 2) taste of food items, and/or 3) shifting decision weights for health versus taste attributes. Therefore, we compared these mechanisms between obese participants and lifetime normal weight controls (NW) both before and after BWL. Females with obesity (N = 37, mean BMI = 33.2) completed a food choice task involving health ratings, taste ratings, and decision-making pre- and post-standard BWL intervention. NW controls (N = 30, BMI = 22.4) completed the same task. Individuals with obesity exhibited increased self-control (selecting healthier, less tasty food choices) post-treatment. However, their rates of self-control remained significantly lower than NW. We found no differences in initial health perceptions across groups, and no changes with treatment. In contrast, taste ratings and the relative value of taste versus health decreased following treatment. Although, post-treatment participants continued to perceive unhealthy foods as tastier and used less self-control than NW controls, they showed significant improvements in these domains following a BWL intervention. To help individuals improve dietary decisions, additional research is needed to determine how to make greater changes in taste preferences and/or the assignment of value to taste versus health attributes in food choices. Copyright © 2017 Elsevier Ltd. All rights reserved.

Tissue-level Mechanical Properties of Bone Contributing to Fracture Risk

PubMed Central

Nyman, Jeffry S.; Granke, Mathilde; Singleton, Robert C.; Pharr, George M.

2016-01-01

Tissue-level mechanical properties characterize mechanical behavior independently of microscopic porosity. Specifically, quasi-static nanoindentation provides measurements of modulus (stiffness) and hardness (resistance to yielding) of tissue at the length scale of the lamella, while dynamic nanoindentation assesses time-dependent behavior in the form of storage modulus (stiffness), loss modulus (dampening), and loss factor (ratio of the two). While these properties are useful in establishing how a gene, signaling pathway, or disease of interest affects bone tissue, they generally do not vary with aging after skeletal maturation or with osteoporosis. Heterogeneity in tissue-level mechanical properties or in compositional properties may contribute to fracture risk, but a consensus on whether the contribution is negative or positive has not emerged. In vivo indentation of bone tissue is now possible, and the mechanical resistance to microindentation has the potential for improving fracture risk assessment, though determinants are currently unknown. PMID:27263108

Tissue-Level Mechanical Properties of Bone Contributing to Fracture Risk.

PubMed

Nyman, Jeffry S; Granke, Mathilde; Singleton, Robert C; Pharr, George M

2016-08-01

Tissue-level mechanical properties characterize mechanical behavior independently of microscopic porosity. Specifically, quasi-static nanoindentation provides measurements of modulus (stiffness) and hardness (resistance to yielding) of tissue at the length scale of the lamella, while dynamic nanoindentation assesses time-dependent behavior in the form of storage modulus (stiffness), loss modulus (dampening), and loss factor (ratio of the two). While these properties are useful in establishing how a gene, signaling pathway, or disease of interest affects bone tissue, they generally do not vary with aging after skeletal maturation or with osteoporosis. Heterogeneity in tissue-level mechanical properties or in compositional properties may contribute to fracture risk, but a consensus on whether the contribution is negative or positive has not emerged. In vivo indentation of bone tissue is now possible, and the mechanical resistance to microindentation has the potential for improving fracture risk assessment, though determinants are currently unknown.

Characterization and tribology of PEG-like coatings on UHMWPE for total hip replacements.

PubMed

Kane, Sheryl R; Ashby, Paul D; Pruitt, Lisa A

2010-03-15

A crosslinked hydrogel coating similar to poly(ethylene glycol) (PEG) was covalently bonded to the surface of ultrahigh molecular weight polyethylene (UHMWPE) to improve the lubricity and wear resistance of the UHWMPE for use in total joint replacements. The chemistry, hydrophilicity, and protein adsorption resistance of the coatings were determined, and the wear behavior of the PEG-like coating was examined by two methods: pin-on-disk tribometry to evaluate macroscale behavior, and atomic force microscopy (AFM) to simulate asperity wear. As expected, the coating was found to be highly PEG-like, with approximately 83% ether content by x-ray photoelectron spectroscopy and more hydrophilic and resistant to protein adsorption than uncoated UHMWPE. Pin-on-disk testing showed that the PEG-like coating could survive 3 MPa of contact pressure, comparable to that experienced by total hip replacements. AFM nanoscratching experiments uncovered three damage mechanisms for the coatings: adhesion/microfracture, pure adhesion, and delamination. The latter two mechanisms appear to correlate well with wear patterns induced by pin-on-disk testing and evaluated by attenuated total reflection Fourier transform infrared spectroscopy mapping. Understanding the mechanisms by which the PEG-like coatings wear is critical for improving the behavior of subsequent generations of wear-resistant hydrogel coatings. (c) 2009 Wiley Periodicals, Inc.

Fabrication and Mechanical Behavior of Ex Situ Mg-Based Bulk Metallic Glass Matrix Composite Reinforced with Electroless Cu-Coated SiC Particles.

PubMed

Wang, Xin; Zhao, Lichen; Hu, Ximei; Cheng, Yongjian; Liu, Shuiqing; Chen, Peng; Cui, Chunxiang

2017-11-30

Magnesium-based bulk metallic glass matrix composites (BMGMCs) have better plasticity than the corresponding bulk metallic glasses (BMGs); however, their strength and density are often compromised due to the fact that the effective reinforcement phase is mostly plastic heavy metal. For lightweight SiC-particle reinforced BMGMCs, interface wettability and the sharpness of the particles often reduce the strengthening effect. In this work, SiC particles were coated with a thin Cu coating by electroless plating, and added to Mg 54 Cu 26.5 Ag 8.5 Gd 11 melt in an amount of 5 wt % to prepare a BMGMC. The microstructure of the interface, mechanical behavior and fracture morphology of the BMGMC were studied by scanning electron microscopy and quasi-static compression testing. The results showed that the Cu coating improved the wettability between SiC and the matrix alloy without obvious interfacial reactions, leading to the dispersion of SiC particles in the matrix. The addition of Cu-coated SiC particles improved the plastic deformation ability of Mg 54 Cu 26.5 Ag 8.5 Gd 11 BMG, proving that electroless plating was an effective method for controlling the interface microstructure and mechanical behavior of BMGMCs.

Contact Angle Measurements: an Alternative Approach Towards Understanding the Mechanism of Increased Drug Dissolution from Ethylcellulose Tablets Containing Surfactant and Exploring the Relationship Between Their Contact Angles and Dissolution Behaviors.

PubMed

Liu, Tiaotiao; Hao, Jingqiang; Yang, Baixue; Hu, Beibei; Cui, Zhixiang; Li, Sanming

2018-05-01

The addition of surfactant in tablet was a well-defined approach to improve drug dissolution rate. While the selected surfactant played a vital role in improving the wettability of tablet by medium, it was equally important to improve the dissolution rate by permeation effect due to production of pores or the reduced inter-particle adhesion. Furthermore, understanding the mechanism of dissolution rate increased was significant. In this work, contact angle measurement was taken up as an alternative approach for understanding the dissolution rate enhancement for tablet containing surfactant. Ethylcellulose, as a substrate, was used to prepare tablet. Four surfactants, sodium dodecyl sulfate (SDS), sodium dodecylbenzenesulfonate (SDBS), dodecyltrimethylammonium bromide (DTAB), and sodium lauryl sulfonate (SLS), were used. Berberine hydrochloride, metformin hydrochloride, and rutin were selected as model drugs. The contact angle of tablet in the absence and presence of surfactant was measured to explore the mechanism. The dissolution test was investigated to verify the mechanism and to establish a correlation with the contact angle. The result showed that the mechanism was the penetration effect rather than the wetting effect. The dissolution increased with a reduction in the contact angle. DTAB was found to obtain the highest level of dissolution enhancement and the lowest contact angle, while SDS, SDBS, and SLS were found to be the less effective in both dissolution enhancement and contact angle decrease. Therefore, contact angle was a good indicator for dissolution behavior besides exploring the mechanism of increased dissolution, which shows great potential in formula screening.

Mechanical Deformation Behavior of Sn-Ag-Cu Solders with Minor Addition of 0.05 wt.% Ni

NASA Astrophysics Data System (ADS)

Hammad, A. E.; El-Taher, A. M.

2014-11-01

The aim of the present work is to develop a comparative evaluation of the microstructural and mechanical deformation behavior of Sn-Ag-Cu (SAC) solders with the minor addition of 0.05 wt.% Ni. Test results showed that, by adding 0.05Ni element into SAC solders, generated mainly small rod-shaped (Cu,Ni)6Sn5 intermetallic compounds (IMCs) inside the β-Sn phase. Moreover, increasing the Ag content and adding Ni could result in the change of the shape and size of the IMC precipitate. Hence, a significant improvement is observed in the mechanical properties of SAC solders with increasing Ag content and Ni addition. On the other hand, the tensile results of Ni-doped SAC solders showed that both the yield stress and ultimate tensile strengths decrease with increasing temperature and with decreasing strain rate. This behavior was attributed to the competing effects of work hardening and dynamic recovery processes. The Sn-2.0Ag-0.5Cu-0.05Ni solder displayed the highest mechanical properties due to the formation of hard (Cu,Ni)6Sn5 IMCs. Based on the obtained stress exponents and activation energies, it is suggested that the dominant deformation mechanism in SAC (205)-, SAC (0505)- and SAC (0505)-0.05Ni solders is pipe diffusion, and lattice self-diffusion in SAC (205)-0.05Ni solder. In view of these results, the Sn-2.0Ag-0.5Cu-0.05Ni alloy is a more reliable solder alloy with improved properties compared with other solder alloys tested in the present work.

Adaptive categorization of ART networks in robot behavior learning using game-theoretic formulation.

PubMed

Fung, Wai-keung; Liu, Yun-hui

2003-12-01

Adaptive Resonance Theory (ART) networks are employed in robot behavior learning. Two of the difficulties in online robot behavior learning, namely, (1) exponential memory increases with time, (2) difficulty for operators to specify learning tasks accuracy and control learning attention before learning. In order to remedy the aforementioned difficulties, an adaptive categorization mechanism is introduced in ART networks for perceptual and action patterns categorization in this paper. A game-theoretic formulation of adaptive categorization for ART networks is proposed for vigilance parameter adaptation for category size control on the categories formed. The proposed vigilance parameter update rule can help improving categorization performance in the aspect of category number stability and solve the problem of selecting initial vigilance parameter prior to pattern categorization in traditional ART networks. Behavior learning using physical robot is conducted to demonstrate the effectiveness of the proposed adaptive categorization mechanism in ART networks.

The contributions of cognitive neuroscience and neuroimaging to understanding mechanisms of behavior change in addiction.

PubMed

Morgenstern, Jon; Naqvi, Nasir H; Debellis, Robert; Breiter, Hans C

2013-06-01

In the last decade, there has been an upsurge of interest in understanding the mechanisms of behavior change (MOBC) and effective behavioral interventions as a strategy to improve addiction-treatment efficacy. However, there remains considerable uncertainty about how treatment research should proceed to address the MOBC issue. In this article, we argue that limitations in the underlying models of addiction that inform behavioral treatment pose an obstacle to elucidating MOBC. We consider how advances in the cognitive neuroscience of addiction offer an alternative conceptual and methodological approach to studying the psychological processes that characterize addiction, and how such advances could inform treatment process research. In addition, we review neuroimaging studies that have tested aspects of neurocognitive theories as a strategy to inform addiction therapies and discuss future directions for transdisciplinary collaborations across cognitive neuroscience and MOBC research. 2013 APA, all rights reserved

The Contributions of Cognitive Neuroscience and Neuroimaging to Understanding Mechanisms of Behavior Change in Addiction

PubMed Central

Morgenstern, Jon; Naqvi, Nasir H.; Debellis, Robert; Breiter, Hans C.

2013-01-01

In the last decade, there has been an upsurge of interest in understanding the mechanisms of behavior change (MOBC) and effective behavioral interventions as a strategy to improve addiction-treatment efficacy. However, there remains considerable uncertainty about how treatment research should proceed to address the MOBC issue. In this article, we argue that limitations in the underlying models of addiction that inform behavioral treatment pose an obstacle to elucidating MOBC. We consider how advances in the cognitive neuroscience of addiction offer an alternative conceptual and methodological approach to studying the psychological processes that characterize addiction, and how such advances could inform treatment process research. In addition, we review neuroimaging studies that have tested aspects of neurocognitive theories as a strategy to inform addiction therapies and discuss future directions for transdisciplinary collaborations across cognitive neuroscience and MOBC research. PMID:23586452

Intrinsic mechanical behavior of femoral cortical bone in young, osteoporotic and bisphosphonate-treated individuals in low- and high energy fracture conditions

DOE PAGES

Zimmermann, Elizabeth A.; Schaible, Eric; Gludovatz, Bernd; ...

2016-02-16

Bisphosphonates are a common treatment to reduce osteoporotic fractures. This treatment induces osseous structural and compositional changes accompanied by positive effects on osteoblasts and osteocytes. Here, we test the hypothesis that restored osseous cell behavior, which resembles characteristics of younger, healthy cortical bone, leads to improved bone quality. Microarchitecture and mechanical properties of young, treatment-naïve osteoporosis, and bisphosphonate-treated cases were investigated in femoral cortices. Tissue strength was measured using three-point bending. Collagen fibril-level deformation was assessed in non-traumatic and traumatic fracture states using synchrotron small-angle x-ray scattering (SAXS) at low and high strain rates. The lower modulus, strength and fibrilmore » deformation measured at low strain rates reflects susceptibility for osteoporotic low-energy fragility fractures. Independent of age, disease and treatment status, SAXS revealed reduced fibril plasticity at high strain rates, characteristic of traumatic fracture. We find the significantly reduced mechanical integrity in osteoporosis may originate from porosity and alterations to the intra/extrafibrillar structure, while the fibril deformation under treatment indicates improved nano-scale characteristics. In conclusion, losses in strength and fibril deformation at low strain rates correlate with the occurrence of fragility fractures in osteoporosis, while improvements in structural and mechanical properties following bisphosphonate treatment may foster resistance to fracture during physiological strain rates.« less

Intrinsic mechanical behavior of femoral cortical bone in young, osteoporotic and bisphosphonate-treated individuals in low- and high energy fracture conditions

NASA Astrophysics Data System (ADS)

Zimmermann, Elizabeth A.; Schaible, Eric; Gludovatz, Bernd; Schmidt, Felix N.; Riedel, Christoph; Krause, Matthias; Vettorazzi, Eik; Acevedo, Claire; Hahn, Michael; Püschel, Klaus; Tang, Simon; Amling, Michael; Ritchie, Robert O.; Busse, Björn

2016-02-01

Bisphosphonates are a common treatment to reduce osteoporotic fractures. This treatment induces osseous structural and compositional changes accompanied by positive effects on osteoblasts and osteocytes. Here, we test the hypothesis that restored osseous cell behavior, which resembles characteristics of younger, healthy cortical bone, leads to improved bone quality. Microarchitecture and mechanical properties of young, treatment-naïve osteoporosis, and bisphosphonate-treated cases were investigated in femoral cortices. Tissue strength was measured using three-point bending. Collagen fibril-level deformation was assessed in non-traumatic and traumatic fracture states using synchrotron small-angle x-ray scattering (SAXS) at low and high strain rates. The lower modulus, strength and fibril deformation measured at low strain rates reflects susceptibility for osteoporotic low-energy fragility fractures. Independent of age, disease and treatment status, SAXS revealed reduced fibril plasticity at high strain rates, characteristic of traumatic fracture. The significantly reduced mechanical integrity in osteoporosis may originate from porosity and alterations to the intra/extrafibrillar structure, while the fibril deformation under treatment indicates improved nano-scale characteristics. In conclusion, losses in strength and fibril deformation at low strain rates correlate with the occurrence of fragility fractures in osteoporosis, while improvements in structural and mechanical properties following bisphosphonate treatment may foster resistance to fracture during physiological strain rates.

Intrinsic mechanical behavior of femoral cortical bone in young, osteoporotic and bisphosphonate-treated individuals in low- and high energy fracture conditions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zimmermann, Elizabeth A.; Schaible, Eric; Gludovatz, Bernd

Bisphosphonates are a common treatment to reduce osteoporotic fractures. This treatment induces osseous structural and compositional changes accompanied by positive effects on osteoblasts and osteocytes. Here, we test the hypothesis that restored osseous cell behavior, which resembles characteristics of younger, healthy cortical bone, leads to improved bone quality. Microarchitecture and mechanical properties of young, treatment-naïve osteoporosis, and bisphosphonate-treated cases were investigated in femoral cortices. Tissue strength was measured using three-point bending. Collagen fibril-level deformation was assessed in non-traumatic and traumatic fracture states using synchrotron small-angle x-ray scattering (SAXS) at low and high strain rates. The lower modulus, strength and fibrilmore » deformation measured at low strain rates reflects susceptibility for osteoporotic low-energy fragility fractures. Independent of age, disease and treatment status, SAXS revealed reduced fibril plasticity at high strain rates, characteristic of traumatic fracture. We find the significantly reduced mechanical integrity in osteoporosis may originate from porosity and alterations to the intra/extrafibrillar structure, while the fibril deformation under treatment indicates improved nano-scale characteristics. In conclusion, losses in strength and fibril deformation at low strain rates correlate with the occurrence of fragility fractures in osteoporosis, while improvements in structural and mechanical properties following bisphosphonate treatment may foster resistance to fracture during physiological strain rates.« less

Water Droplet and Cavitation Erosion Behavior of Laser-Treated Stainless Steel and Titanium Alloy: Their Similarities

NASA Astrophysics Data System (ADS)

Mann, B. S.

2013-12-01

This article deals with water droplet and cavitation erosion behavior of diode laser-treated X10CrNiMoV1222 stainless steel and Ti6Al4V alloy. After laser surface treatment, the water droplet and cavitation erosion resistance (WDER and CER) of these materials improved significantly. The main reason for the improvement is the increased surface hardness and formation of fine-grained microstructures after laser surface treatment. It is observed that there is a similarity in both the phenomena. The WDER and CER can be correlated with a single mechanical property based on modified ultimate resilience (MUR) provided the laser-treated layers are free from microcracks and interface defects. The CER and WDER behavior of HPDL-treated X10CrNiMoV1222 stainless steel and Ti6Al4V alloy samples using different test equipment as per ASTM G32-2003 and ASTM G73-1978, their correlation with MUR, and their damage mechanism compared on the basis of XRD analyses, optical and scanning electron micrographs are discussed and reported in this article.

Biological Mechanisms that Promote Weight Regain Following Weight Loss in Obese Humans

PubMed Central

Ochner, Christopher N.; Barrios, Dulce M.; Lee, Clement D.; Pi-Sunyer, F. Xavier

2013-01-01

Weight loss dieting remains the treatment of choice for the vast majority of obese individuals, despite the limited long-term success of behavioral weight loss interventions. The reasons for the near universal unsustainability of behavioral weight loss in [formerly] obese individuals have not been fully elucidated, relegating researchers to making educated guesses about how to improve obesity treatment, as opposed to developing interventions targeting the causes of weight regain. This article discusses research on several factors that may contribute to weight regain following weight loss achieved through behavioral interventions, including adipose cellularity, endocrine function, energy metabolism, neural responsivity, and addiction-like neural mechanisms. All of these mechanisms are engaged prior to weight loss, suggesting that so called “anti-starvation” mechanisms are activated via reductions in energy intake, rather than depletion of energy stores. Evidence suggests that these mechanisms are not necessarily part of a homeostatic feedback system designed to regulate body weight or even anti-starvation mechanisms per se. Though they may have evolved to prevent starvation, they appear to be more accurately described as anti-weight loss mechanisms, engaged with caloric restriction irrespective of the adequacy of energy stores. It is hypothesized that these factors may combine to create a biological disposition that fosters the maintenance of an elevated body weight and work to restore the highest sustained body weight, thus precluding the long-term success of behavioral weight loss. It may be necessary to develop interventions that attenuate these biological mechanisms in order to achieve long-term weight reduction in obese individuals. PMID:23911805

Failure to replicate the deleterious effects of safety behaviors in exposure therapy.

PubMed

Sy, Jennifer T; Dixon, Laura J; Lickel, James J; Nelson, Elizabeth A; Deacon, Brett J

2011-05-01

The current study attempted to replicate the finding obtained by Powers, Smits, and Telch (2004; Journal of Consulting and Clinical Psychology, 72, 448-545) that both the availability and utilization of safety behaviors interfere with the efficacy of exposure therapy. An additional goal of the study was to evaluate which explanatory theories about the detrimental effects of safety behaviors best account for this phenomenon. Undergraduate students (N=58) with high claustrophobic fear were assigned to one of three treatment conditions: (a) exposure only, (b) exposure with safety behavior availability, and (c) exposure with safety behavior utilization. Participants in each condition improved substantially, and there were no significant between-group differences in fear reduction. Unexpectedly, exposure with safety behavior utilization led to significantly greater improvement in self-efficacy and claustrophobic cognitions than exposure only. The extent to which participants inferred danger from the presence of safety aids during treatment was associated with significantly less improvement on all outcome measures. The findings call into question the hypothesized deleterious effects of safety behaviors on the outcome of exposure therapy and highlight a possible mechanism through which the mere presence of safety cues during exposure trials might affect treatment outcomes depending on participants' perceptions of the dangerousness of exposure stimuli. Published by Elsevier Ltd.

Improved Rubin-Bodner Model for the Prediction of Soft Tissue Deformations

PubMed Central

Zhang, Guangming; Xia, James J.; Liebschner, Michael; Zhang, Xiaoyan; Kim, Daeseung; Zhou, Xiaobo

2016-01-01

In craniomaxillofacial (CMF) surgery, a reliable way of simulating the soft tissue deformation resulted from skeletal reconstruction is vitally important for preventing the risks of facial distortion postoperatively. However, it is difficult to simulate the soft tissue behaviors affected by different types of CMF surgery. This study presents an integrated bio-mechanical and statistical learning model to improve accuracy and reliability of predictions on soft facial tissue behavior. The Rubin-Bodner (RB) model is initially used to describe the biomechanical behavior of the soft facial tissue. Subsequently, a finite element model (FEM) computers the stress of each node in soft facial tissue mesh data resulted from bone displacement. Next, the Generalized Regression Neural Network (GRNN) method is implemented to obtain the relationship between the facial soft tissue deformation and the stress distribution corresponding to different CMF surgical types and to improve evaluation of elastic parameters included in the RB model. Therefore, the soft facial tissue deformation can be predicted by biomechanical properties and statistical model. Leave-one-out cross-validation is used on eleven patients. As a result, the average prediction error of our model (0.7035mm) is lower than those resulting from other approaches. It also demonstrates that the more accurate bio-mechanical information the model has, the better prediction performance it could achieve. PMID:27717593

Bistable Mechanisms for Space Applications

PubMed Central

Zirbel, Shannon A.; Tolman, Kyler A.; Trease, Brian P.

2016-01-01

Compliant bistable mechanisms are monolithic devices with two stable equilibrium positions separated by an unstable equilibrium position. They show promise in space applications as nonexplosive release mechanisms in deployment systems, thereby eliminating friction and improving the reliability and precision of those mechanical devices. This paper presents both analytical and numerical models that are used to predict bistable behavior and can be used to create bistable mechanisms in materials not previously feasible for compliant mechanisms. Materials compatible with space applications are evaluated for use as bistable mechanisms and prototypes are fabricated in three different materials. Pin-puller and cutter release mechanisms are proposed as potential space applications. PMID:28030588

Neurobiochemical and psychological factors influencing the eating behaviors and attitudes in anorexia nervosa.

PubMed

Grzelak, Teresa; Dutkiewicz, Agata; Paszynska, Elzbieta; Dmitrzak-Weglarz, Monika; Slopien, Agnieszka; Tyszkiewicz-Nwafor, Marta

2017-05-01

The aim of this study was to determine the characteristic features which contribute to inappropriate eating attitudes in people suffering from anorexia nervosa, based on an analysis of recent data. Factors influencing these attitudes have a genetic, neurobiological, biochemical, affective-motivational, cognitive, and behavioral background. Another important issue addressed in the paper is a description of the mechanism leading to continuous dietary restrictions. The altered activity of neurotransmitters modulating patients' moods after the consumption of food and a disturbed responsiveness to enterohormones enhance affective-motivational and cognitive aspects which, in turn, impede the improvement of eating behaviors. An understanding of the mechanisms behind the factors affecting the maintenance of inappropriate eating attitudes may contribute to greater effectiveness in the treatment of anorexia nervosa.

Investigation of Hot Cracking Behavior in Transverse Mechanically Arc Oscillated Autogenous AA2014 T6 TIG Welds

NASA Astrophysics Data System (ADS)

Biradar, N. S.; Raman, R.

2012-09-01

Hot cracking studies on autogenous AA2014 T6 TIG welds were carried out. Significant cracking was observed during linear and circular welding test (CWT) on 4-mm-thick plates. Weld metal grain structure and amount of liquid distribution during the terminal stages of solidification were the key cause for hot cracking in aluminum welds. Square-wave AC TIG welding with transverse mechanical arc oscillation (TMAO) was employed to study the cracking behavior during linear and CWT. TMAO welds with amplitude = 0.9 mm and frequency = 0.5 Hz showed significant reduction in cracking tendency. The increase in cracking resistance in the arc-oscillated weld was attributed to grain refinement and improved weld bead morphology, which improved the weld metal ductility and uniformity, respectively, of residual tensile stresses that developed during welding. The obtained results were comparable to those of reported favorable results of electromagnetic arc oscillation.

Understanding glass formation and ion transport in polymeric ionic liquids using computer simulations

NASA Astrophysics Data System (ADS)

Patra, Tarak; Yang, Junhong; Cheng, Yiz; Simmons, David

Polymeric ionic liquids (PILs) are very promising materials to enable more environmentally stable high density energy storage devices. Realization of PILs providing high environmental and mechanical stability while maximizing ion conductivity would be accelerated by an improved molecular level understanding of their structure and dynamics. Extensive evidence suggests that both mechanical properties and ion conductivity in anhydrous PILs are intimately related to the PIL's glass formation behavior. This represents a major challenge to the rational design of these materials, given that the basic nature of glass formation and its connection to molecular properties remains a substantial open question in polymer and condensed matter physics. Here we describe coarse-grained and atomistic molecular dynamics simulations probing the relationship between PIL architecture and interactions, glass formation behavior, and ion transport characteristics. These studies provide guidance towards the design of PILs with improved stability and ion conductivity for future energy applications.

I can't wait: Methods for measuring and moderating individual differences in impulsive choice.

PubMed

Peterson, Jennifer R; Hill, Catherine C; Marshall, Andrew T; Stuebing, Sarah L; Kirkpatrick, Kimberly

2015-01-01

Impulsive choice behavior occurs when individuals make choices without regard for future consequences. This behavior is often maladaptive and is a common symptom in many disorders, including drug abuse, compulsive gambling, and obesity. Several proposed mechanisms may influence impulsive choice behavior. These mechanisms provide a variety of pathways that may provide the basis for individual differences that are often evident when measuring choice behavior. This review provides an overview of these different pathways to impulsive choice, and the behavioral intervention strategies being developed to moderate impulsive choice. Because of the compelling link between impulsive choice behavior and the near-epidemic pervasiveness of obesity in the United States, we focus on the relationship between impulsive choice behavior and obesity as a test case for application of the multiple pathways approach. Choosing immediate gratification over healthier long term food choices is a contributing factor to the obesity crisis. Behavioral interventions can lead to more self controlled choices in a rat pre-clinical model, suggesting a possible gateway for translation to human populations. Designing and implementing effective impulsive choice interventions is crucial to improving the overall health and well-being of impulsive individuals.

I can't wait: Methods for measuring and moderating individual differences in impulsive choice

PubMed Central

Peterson, Jennifer R.; Hill, Catherine C.; Marshall, Andrew T.; Stuebing, Sarah L.; Kirkpatrick, Kimberly

2016-01-01

Impulsive choice behavior occurs when individuals make choices without regard for future consequences. This behavior is often maladaptive and is a common symptom in many disorders, including drug abuse, compulsive gambling, and obesity. Several proposed mechanisms may influence impulsive choice behavior. These mechanisms provide a variety of pathways that may provide the basis for individual differences that are often evident when measuring choice behavior. This review provides an overview of these different pathways to impulsive choice, and the behavioral intervention strategies being developed to moderate impulsive choice. Because of the compelling link between impulsive choice behavior and the near-epidemic pervasiveness of obesity in the United States, we focus on the relationship between impulsive choice behavior and obesity as a test case for application of the multiple pathways approach. Choosing immediate gratification over healthier long term food choices is a contributing factor to the obesity crisis. Behavioral interventions can lead to more self controlled choices in a rat pre-clinical model, suggesting a possible gateway for translation to human populations. Designing and implementing effective impulsive choice interventions is crucial to improving the overall health and well-being of impulsive individuals. PMID:27695664

Development of visible-light responsive and mechanically enhanced "smart" UCST interpenetrating network hydrogels.

PubMed

Xu, Yifei; Ghag, Onkar; Reimann, Morgan; Sitterle, Philip; Chatterjee, Prithwish; Nofen, Elizabeth; Yu, Hongyu; Jiang, Hanqing; Dai, Lenore L

2017-12-20

An interpenetrating polymer network (IPN), chlorophyllin-incorporated environmentally responsive hydrogel was synthesized and exhibited the following features: enhanced mechanical properties, upper critical solution temperature (UCST) swelling behavior, and promising visible-light responsiveness. Poor mechanical properties are known challenges for hydrogel-based materials. By forming an interpenetrating network between polyacrylamide (PAAm) and poly(acrylic acid) (PAAc) polymer networks, the mechanical properties of the synthesized IPN hydrogels were significantly improved compared to hydrogels made of a single network of each polymer. The formation of the interpenetrating network was confirmed by Fourier Transform Infrared Spectroscopy (FTIR), the analysis of glass transition temperature, and a unique UCST responsive swelling behavior, which is in contrast to the more prevalent lower critical solution temperature (LCST) behaviour of environmentally responsive hydrogels. The visible-light responsiveness of the synthesized hydrogel also demonstrated a positive swelling behavior, and the effect of incorporating chlorophyllin as the chromophore unit was observed to reduce the average pore size and further enhance the mechanical properties of the hydrogel. This interpenetrating network system shows potential to serve as a new route in developing "smart" hydrogels using visible-light as a simple, inexpensive, and remotely controllable stimulus.

Crocin improved locomotor function and mechanical behavior in the rat model of contused spinal cord injury through decreasing calcitonin gene related peptide (CGRP).

PubMed

Karami, Masoume; Bathaie, S Zahra; Tiraihi, Taqi; Habibi-Rezaei, Mehran; Arabkheradmand, Jalil; Faghihzadeh, Soghrat

2013-12-15

Various approaches have been offered to alleviate chronic pain resulting from spinal cord injuries (SCIs). Application of herbs and natural products, with potentially lower adverse effects, to cure diseases has been recommended in both traditional and modern medicines. Here, the effect of crocin on chronic pain induced by spinal cord contusion was investigated in an animal model. Female Wistar rats were randomly divided into five groups (5 rats in each); three groups were contused at the L1 level. One group was treated with crocin (150mg/kg) two weeks after spinal cord injury; the second group, control, was treated with vehicle only; and the third group was treated with ketoprofen. Two normal groups were also considered with or without crocin treatment. The mechanical behavioral test, the locomotor recovery test and the thermal behavioral test were applied weekly to evaluate the injury and recovery of rats. Significant improvements (p<0.05) in mechanical behavioral and locomotor recovery tests were seen in the rats treated with crocin. Thermal behavioral test did not show any significant changes due to crocin treatment. Plasma concentration of calcitonin-gene related peptide (CGRP) changed from 780.2±2.3 to 1140.3±4.5pg/ml due to SCI and reached 789.1±2.7pg/ml after crocin treatment. These changes were significant at the level of p<0.05. The present study shows the beneficial effects of crocin treatment on chronic pain induced by SCI, through decreasing CGRP as an important mediator of inflammation and pain. Copyright © 2013 Elsevier GmbH. All rights reserved.

Improving Powder Tableting Performance through Materials Engineering

NASA Astrophysics Data System (ADS)

Osei-Yeboah, Frederick

Adequate mechanical strength is a critical requirement to the successful development of a tablet product. Before tablet compression, powders are often engineered by various processes including wet granulation and surface coating, which may improve or adversely affect the powder tableting performance. Such effects, commonly, result from a change in either particle mechanical properties or particulate (size, shape) properties. In this work, tableting performance is interpreted based on the qualitative bonding-area and bonding-strength (BABS) model. The tabletability of the microcrystalline cellulose (MCC) granules deteriorates rapidly with increasing amount of granulating water and eventually leads to over-granulation at high water level. Granule surface smoothing, size enlargement, granule densification and shape rounding are the dominant factors leading to the tabletability reduction of plastic MCC. Incorporation of increasing amounts of brittle excipients, such as lactose or dibasic calcium phosphate reduces the rate of tabletability reduction by promoting more granule fragmentation, introducing more surface area available for bonding. When a sufficient amount of brittle excipients is used, the over-granulation phenomenon can be eliminated. Surface coating of incompressible MCC pellets with highly bonding polymer leads to sufficient surface deformation and adhesion to enable direct compression of the pellets into tablets of adequate mechanical strength. This improvement is enhanced by the presence of moisture, which plasticizes the polymer to allow the development of a larger bonding area between coated pellets. The relationship between mechanical properties and tableting behavior is systematically investigated in polymeric composites using celecoxib-polyvinylpyrrolidone vinyl acetate solid dispersions. Mechanical properties such as indentation hardness of the solid dispersions were measured using nanoindentation. Incorporation of celecoxib up to 60% by weight hardens the polymers, which reduces bonding area but increases bonding strength. On the other hand, moisture softens the solid dispersions and facilitates deformation under pressure to improve tablet mechanical strength. In summary, insights into the deteriorated tabletability of wet granulated powders have been developed and strategies for improving tabletability have been demonstrated. Also, the relationship between particle mechanical properties and tableting performance has been examined using solid dispersions. The BABS model has been further developed to enable its widespread application in interpreting complex tableting behavior.

A structural model of health behavior: a pragmatic approach to explain and influence health behaviors at the population level.

PubMed

Cohen, D A; Scribner, R A; Farley, T A

2000-02-01

Behavior is influenced by individual-level attributes as well as by the conditions under which people live. Altering policies, practices, and the conditions of life can directly and indirectly influence individual behavior. This paper builds on existing ecological theories of health behavior by specifying structural mechanisms by which population-level factors effect change in individual health behaviors. This paper moves ecological theory from model building to a pragmatic characterization of structural interventions. We examined social and environmental factors beyond individual control and mechanisms as to how they influence behavior. Four categories of structural factors are identified: (1) availability of protective or harmful consumer products, (2) physical structures (or physical characteristics of products), (3) social structures and policies, and (4) media and cultural messages. The first three can directly influence individuals through facilitating or constraining behavior. The fourth, media, operates by changing individual-level attitudes, beliefs, and cognitions, as well as group norms. Interventions that target the four identified structural factors are a means to provide conditions that not only reduce high-risk behavior but also prevent the adoption of high-risk behaviors. Structural interventions are important and underutilized approaches for improving our nation's health. Copyright 2000 American Health Foundation and Academic Press.

Chitosan/titanium dioxide nanocomposite coatings: Rheological behavior and surface application to cellulosic paper.

PubMed

Tang, Yanjun; Hu, Xiulan; Zhang, Xinqi; Guo, Daliang; Zhang, Junhua; Kong, Fangong

2016-10-20

Incorporation of nanofillers into a polymeric matrix has received much attention as a route to reinforced polymer nanocomposites. In the present work, an environmentally friendly chitosan (CTS)/titanium dioxide (TiO2) nanocomposite coating was designed/prepared and subsequently employed for imparting antibacterium and improved mechanical properties to cellulosic paper via surface coating. Effect of TiO2 nanoparticle loadings on the rheological behavior of nanocomposite coatings was investigated. Surface application of CTS/TiO2 nanocomposite coatings to cellulosic paper was performed, and the antibacterial activity and mechanical properties of surface-coated cellulosic paper were examined. Results showed that the increased TiO2 nanoparticle loadings decreased the viscosity and dynamic viscoelasticity of the as-prepared coatings, and improved the antibacterial activity and mechanical properties of surface-coated cellulosic paper. The optimum loading of TiO2 nanoparticles was identified at 10%. This work suggested that CTS/TiO2 nanocomposite coatings may have the potential to be used as a promising antibacterial protective coating for paper packaging. Copyright © 2016 Elsevier Ltd. All rights reserved.

Goal setting: an integral component of effective diabetes care.

PubMed

Miller, Carla K; Bauman, Jennifer

2014-08-01

Goal setting is a widely used behavior change tool in diabetes education and training. Prior research found specific relatively difficult but attainable goals set within a specific timeframe improved performance in sports and at the workplace. However, the impact of goal setting in diabetes self-care has not received extensive attention. This review examined the mechanisms underlying behavioral change according to goal setting theory and evaluated the impact of goal setting in diabetes intervention studies. Eight studies were identified, which incorporated goal setting as the primary strategy to promote behavioral change in individual, group-based, and primary care settings among patients with type 2 diabetes. Improvements in diabetes-related self-efficacy, dietary intake, physical activity, and A1c were observed in some but not all studies. More systematic research is needed to determine the conditions and behaviors for which goal setting is most effective. Initial recommendations for using goal setting in diabetes patient encounters are offered.

Improving Visual Acuity of Myopes through Operant Training: The Evaluation of Psychological and Physiological Mechanisms Facilitating Acuity Enhancement

DTIC Science & Technology

1988-12-01

Suiek. M. ( 1987 ). Voice and Manual Control in Dual Task Situations. Proceedings o* the Human Pactors Society. (31st Annual Meeting): 419-423. FIELDS OF...aberration. Trachtman ( 1987 ) found that a reduction in pupil size alone may improve acuity although accommodation remains unchanged. 18 One means of...that facilitate behaviorally trained visual acuity improvement (Gallaway, Pearl, Winkelstein, & Scheiman, 1987 ). Relatively few eye care practitioners

Screening on binary Ti alloy with excellent mechanical property and castability for dental prosthesis application

PubMed Central

Li, H. F.; Qiu, K. J.; Yuan, W.; Zhou, F. Y.; Wang, B. L.; Li, L.; Zheng, Y. F.; Liu, Y. H.

2016-01-01

In the present study, the microstructure, mechanical property, castability, corrosion behavior and in vitro cytocompatibility of binary Ti–2X alloys with various alloying elements, including Ag, Bi, Ga, Ge, Hf, In, Mo, Nb, Sn and Zr, were systematically investigated, in order to assess their potential applications in dental field. The experimental results showed that all binary Ti‒2X alloys consisted entirely α–Ti phase. The tensile strength and microhardness of Ti were improved by adding alloying elements. The castability of Ti was significantly improved by separately adding 2 wt.% Bi, Ga, Hf, Mo, Nb, Sn and Zr. The corrosion resistance of Ti in both normal artificial saliva solution (AS) and extreme artificial saliva solution (ASFL, AS with 0.2 wt.% NaF and 0.3 wt.% lactic acid) has been improved by separately adding alloying elements. In addition, the extracts of studied Ti‒2X alloys produced no significant deleterious effect to both fibroblasts L929 cells and osteoblast-like MG63 cells, indicating a good in vitro cytocompatibility, at the same level as pure Ti. The combination of enhanced mechanical properties, castability, corrosion behavior, and in vitro cytocompatibility make the developed Ti‒2X alloys have great potential for future stomatological applications. PMID:27874034

Experimental Investigation of the Effect of Burnishing Force on Service Properties of AISI 1010 Steel Plates

NASA Astrophysics Data System (ADS)

Gharbi, F.; Sghaier, S.; Morel, F.; Benameur, T.

2015-02-01

This paper presents the results obtained with a new ball burnishing tool developed for the mechanical treatment of large flat surfaces. Several parameters can affect the mechanical behavior and fatigue of workpiece. Our study focused on the effect of the burnishing force on the surface quality and on the service properties (mechanical behavior, fatigue) of AISI 1010 steel hot-rolled plates. Experimental results assert that burnishing force not exceeding 300 N causes an increase in the ductility. In addition, results indicated that the effect of the burnishing force on the residual surface stress was greater in the direction of advance than in the cross-feed direction. Furthermore, the flat burnishing surfaces did not improve the fatigue strength of AISI 1010 steel flat specimens.

Deformation mechanisms to ameliorate the mechanical properties of novel TRIP/TWIP Co-Cr-Mo-(Cu) ultrafine eutectic alloys

PubMed Central

Kim, J. T.; Hong, S. H.; Park, H. J.; Kim, Y. S.; Suh, J. Y.; Lee, J. K.; Park, J. M.; Maity, T.; Eckert, J.; Kim, K. B.

2017-01-01

In the present study, the microstructural evolution and the modulation of the mechanical properties have been investigated for a Co-Cr-Mo (CCM) ternary eutectic alloy by addition of a small amount of copper (0.5 and 1 at.%). The microstructural observations reveal a distinct dissimilarity in the eutectic structure such as a broken lamellar structure and a well-aligned lamellar structure and an increasing volume fraction of Co lamellae as increasing amount of copper addition. This microstructural evolution leads to improved plasticity from 1% to 10% without the typical tradeoff between the overall strength and compressive plasticity. Moreover, investigation of the fractured samples indicates that the CCMCu alloy exhibits higher plastic deformability and combinatorial mechanisms for improved plastic behavior. The improved plasticity of CCMCu alloys originates from several deformation mechanisms; i) slip, ii) deformation twinning, iii) strain-induced transformation and iv) shear banding. These results reveal that the mechanical properties of eutectic alloys in the Co-Cr-Mo system can be ameliorated by micro-alloying such as Cu addition. PMID:28067248

Microstructure and Mechanical Behavior of Amorphous Al-Cu-Ti Metal Foams Synthesized by Spark Plasma Sintering

NASA Astrophysics Data System (ADS)

Li, Maoyuan; Lu, Lin; Dai, Zhen; Hong, Yiqiang; Chen, Weiwei; Zhang, Yuping; Qiao, Yingjie

Amorphous Al-Cu-Ti metal foams were prepared by spark plasma sintering (SPS) process with the diameter of 10mm. The SPS process was conducted at the pressure of 200 and 300MPa with the temperature of 653-723K, respectively. NaCl was used as the space-holder, forming almost separated pores with the porosity of 65 vol%. The microstructure and mechanical behavior of the amorphous Al-Cu-Ti metal foams were systematically investigated. The results show that the crystallinity increased at elevated temperatures. The effect of pressure and holding time on the crystallization was almost negligible. The intermetallic compounds, i.e. Al-Ti, Al-Cu and Al-Cu-Ti were identified from X-ray diffraction (XRD) patterns. It was found that weak adhesion and brittle intermetallic compounds reduced the mechanical properties, while lower volume fraction and smaller size of NaCl powders improved the mechanical properties.

Impact of inertia, friction, and backlash upon force control in telemanipulation

NASA Technical Reports Server (NTRS)

Duffie, Neil A.; Zik, John J.; Wiker, Steven F.; Gale, Karen L.

1991-01-01

The mechanical behavior of master controllers of telemanipulators has been a concern of both designers and implementors of telerobotic systems. In general, the literature recommends that telemanipulator systems be constructed that minimize inertia, friction, and backlash in an effort to improve telemanipulative performance. For the most part, these recommendations are founded upon theoretical analysis or simply intuition. Although these recommendations are not challenged on their merit, the material results are measured of building and fielding telemanipulators that possess less than ideal mechanical behaviors. Experiments are described in which forces in a mechanical system with human input are evaluated as a function of mechanical characteristics such as inertia, friction, and backlash. Results indicate that the ability of the human to maintain gripping forces was relatively unaffected by dynamic characteristics in the range studied, suggesting that telemanipulator design in this range should be based on task level force control requirements rather than human factors.

Direct Observation of Markovian Behavior of the Mechanical Unfolding of Individual Proteins

PubMed Central

Cao, Yi; Kuske, Rachel; Li, Hongbin

2008-01-01

Single-molecule force-clamp spectroscopy is a valuable tool to analyze unfolding kinetics of proteins. Previous force-clamp spectroscopy experiments have demonstrated that the mechanical unfolding of ubiquitin deviates from the generally assumed Markovian behavior and involves the features of glassy dynamics. Here we use single molecule force-clamp spectroscopy to study the unfolding kinetics of a computationally designed fast-folding mutant of the small protein GB1, which shares a similar β-grasp fold as ubiquitin. By treating the mechanical unfolding of polyproteins as the superposition of multiple identical Poisson processes, we developed a simple stochastic analysis approach to analyze the dwell time distribution of individual unfolding events in polyprotein unfolding trajectories. Our results unambiguously demonstrate that the mechanical unfolding of NuG2 fulfills all criteria of a memoryless Markovian process. This result, in contrast with the complex mechanical unfolding behaviors observed for ubiquitin, serves as a direct experimental demonstration of the Markovian behavior for the mechanical unfolding of a protein and reveals the complexity of the unfolding dynamics among structurally similar proteins. Furthermore, we extended our method into a robust and efficient pseudo-dwell-time analysis method, which allows one to make full use of all the unfolding events obtained in force-clamp experiments without categorizing the unfolding events. This method enabled us to measure the key parameters characterizing the mechanical unfolding energy landscape of NuG2 with improved precision. We anticipate that the methods demonstrated here will find broad applications in single-molecule force-clamp spectroscopy studies for a wide range of proteins. PMID:18375518

How Does Household Income Affect Child Personality Traits and Behaviors?†

PubMed Central

Akee, Randall; Copeland, William; Costello, E. Jane; Simeonova, Emilia

2018-01-01

We examine the effects of a quasi-experimental unconditional household income transfer on child emotional and behavioral health and personality traits. Using longitudinal data, we find that there are large beneficial effects on children’s emotional and behavioral health and personality traits during adolescence. We find evidence that these effects are most pronounced for children who start out with the lowest initial endowments. The income intervention also results in improvements in parental relationships which we interpret as a potential mechanism behind our findings. PMID:29568124

Opening Session Addresses Presented at the Army Symposium on Solid Mechanics, 1980 - Designing for Extremes: Environment, Loading, and Structural Behavior Held at Cape Cod, Massachusetts, 30 September-2 October 1980

DTIC Science & Technology

1980-09-01

Structural Behavior".4- D) , o 1413 MDfs or INOVSISSSOLETE UNCLASSIFIED tL?& SECURITY CLASSIFICATION Of THIS PAGE (,"en Dote Entered) .4 UNCLASSIFIED...BEHAVIOR, DEVELOP IMPROVED PLAS- TICS LASER HARDENING • PROVIDE MATERIALS AND STRUCTURES TECH- NOLOGY BASE TO MEET HIGH ENERGY LASER THREAT DAMAGE...technology at this " cutting -edge" have been consistently responsible for the many facets of the technological advantage this country needs on a continuing

Global and local investigations of the electrochemical behavior the T6 heat treated Mg-Zn-RE magnesium alloy thixo-cast

NASA Astrophysics Data System (ADS)

Szklarz, Zbigniew; Bisztyga, Magdalena; Krawiec, Halina; Lityńska-Dobrzyńska, Lidia; Rogal, Łukasz

2017-05-01

The influence of semi-solid metal processing (SSM called also as thixoforming) of ZE41A magnesium alloy on the electrochemical behavior in 0.1 M NaCl solution was investigated. To describe the corrosion behavior of ZE41A alloy, the electrochemical measurements were conducted in global and local scale for two types of specimens: (1) ingot-feedstock, (2) specimen after thixoforming and T6 treatment. The heat treatment and thixoforming significantly improved mechanical properties of ZE41A alloy. The global corrosion potential is slightly higher for treated sample what is related to the presence of Zr-Zn nanoparticles distributed in solid solution. The corrosion behavior differences between feedstock and thixo-cast after T6 samples are also visible in local scale, what has been revealed by using microcapillary technique. However there is no improvement in corrosion behavior after treatment. Corrosion morphology of the treated sample indicate higher susceptibility to pitting and filiform corrosion. Corrosion rate is also slightly higher.

Surface modifications of steels to improve corrosion resistance in sulfidizing-oxidizing environments

NASA Astrophysics Data System (ADS)

Behrani, Vikas

Industrial and power generation processes employ units like boilers and gasifiers to burn sulfur containing fuels to produce steam and syn gas (H 2 and CO), which can generate electricity using turbines and fuel cells. These units often operate under environments containing gases such as H 2S, SO2, O2 etc, which can attack the metallic structure and impose serious problems of corrosion. Corrosion control in high temperature sulfur bearing environments is a challenging problem requiring information on local gaseous species at the surface of alloy and mechanisms of degradation in these environments. Coatings have proved to be a better alternative for improving corrosion resistance without compromising the bulk mechanical properties. Changes in process conditions may result in thermal and/or environment cycling between oxidizing and sulfidizing environments at the alloy surface, which can damage the protective scale formed on the alloy surface, leading to increase in corrosion rates. Objective of this study was to understand the effect of fluctuating environments on corrosion kinetics of carbon steels and develop diffusion based coatings to mitigate the high temperatures corrosion under these conditions. More specifically, the focus was: (1) to characterize the local gaseous environments at the surface of alloys in boilers; (2) optimizing diffusion coatings parameters for carbon steel; (3) understand the underlying failure mechanisms in cyclic environments; (4) to improve aluminide coating behavior by co-deposition of reactive elements such as Yttrium and Hafnium; (5) to formulate a plausible mechanism of coating growth and effects of alloying elements on corrosion; and (6) to understand the spallation behavior of scale by measuring stresses in the scales. The understanding of coating mechanism and effects of fluctuating gaseous environments provides information for designing materials with more reliable performance. The study also investigates the mechanism behind the effect of REs on scale adhesion and sulfidation behavior. Thus, the present work will have a broad impact on the field of materials and coatings selection for high temperature industrial environments such as boilers and gasifiers, and provides information on RE-modified aluminized coatings on carbon steel as an alternative for the use of bulk superalloys under high temperature sulfur bearing environments.

Sleep-Related Safety Behaviors and Dysfunctional Beliefs Mediate the Efficacy of Online CBT for Insomnia: A Randomized Controlled Trial.

PubMed

Lancee, Jaap; Eisma, Maarten C; van Straten, Annemieke; Kamphuis, Jan H

2015-01-01

Several trials have demonstrated the efficacy of online cognitive behavioral therapy (CBT) for insomnia. However, few studies have examined putative mechanisms of change based on the cognitive model of insomnia. Identification of modifiable mechanisms by which the treatment works may guide efforts to further improve the efficacy of insomnia treatment. The current study therefore has two aims: (1) to replicate the finding that online CBT is effective for insomnia and (2) to test putative mechanism of change (i.e., safety behaviors and dysfunctional beliefs). Accordingly, we conducted a randomized controlled trial in which individuals with insomnia were randomized to either online CBT for insomnia (n = 36) or a waiting-list control group (n = 27). Baseline and posttest assessments included questionnaires assessing insomnia severity, safety behaviors, dysfunctional beliefs, anxiety and depression, and a sleep diary. Three- and six-month assessments were administered to the CBT group only. Results show moderate to large statistically significant effects of the online treatment compared to the waiting list on insomnia severity, sleep measures, sleep safety behaviors, and dysfunctional beliefs. Furthermore, dysfunctional beliefs and safety behaviors mediated the effects of treatment on insomnia severity and sleep efficiency. Together, these findings corroborate the efficacy of online CBT for insomnia, and suggest that these effects were produced by changing maladaptive beliefs, as well as safety behaviors. Treatment protocols for insomnia may specifically be enhanced by more focused attention on the comprehensive fading of sleep safety behaviors, for instance through behavioral experiments.

Thermo-responsive and compression properties of TEMPO-oxidized cellulose nanofiber-modified PNIPAm hydrogels.

PubMed

Wei, Jinguang; Chen, Yufei; Liu, Hongzhi; Du, Chungui; Yu, Huilong; Zhou, Zhongxi

2016-08-20

In this study, TEMPO-oxidized bamboo cellulose nanofibers (TO-CNF) with anionic carboxylate groups on the surfaces were in-situ incorporated into poly(N-isopropylacrylamide) (PNIPAm) matrix to improve its thermo-responsive and mechanical properties during the polymerization. The microstructure, swelling behaviors, and compressive strength of resultant PNIPAm composite hydrogels with varying contents of TO-CNFs (0-10wt%) were then examined, respectively. Modified hydrogels exhibited the similar light transparency to pure PNIPAm one due to the formation of semi-IPN structure between PNIPAm and TO-CNF. FT-IR spectra demonstrated that the presence of TO-CNF did not alter the position of characteristic peaks associated with PNIPAm. SEM observation suggested that the pore size of PNIPAm hydrogels was markedly increased after the incorporation of TO-CNF. Also, the composite hydrogels showed superior swelling behavior and much improved compression properties with respect to pure PNIPAm one. Thus, TO-CNF appeared to be a "green" nanofiller that can simultaneously improve swelling and mechanical properties of PNIPAm hydrogel. Copyright © 2016 Elsevier Ltd. All rights reserved.

Improvement of railway ballast maintenance approach, incorporating ballast geometry and fouling conditions

NASA Astrophysics Data System (ADS)

Sadeghi, J.; Motieyan-Najar, M. E.; Zakeri, J. A.; Yousefi, B.; Mollazadeh, M.

2018-04-01

Ballast plays an important role in the stability of railway track systems. The effectiveness of the ballast in maintaining the track stability is very much dependent on its mechanical conditions. The available ballast maintenance approaches are mainly based on only track geometry conditions (such as track profile) which do not sufficiently reflect the ballast mechanical behaviors. That is, the ballast potential of degradation (i.e., ballast long term behaviors) has been omitted. This makes the effectiveness of the current ballast maintenance approach questionable, indicating a need for a more comprehensive and effective ballast conditions assessment technique. In response to this need, two ballast condition indices based on ballast geometry degradation (BGI) and the level of ballast fouling (BFI) as the main indicators of ballast mechanical behavior were developed. The BGI is a function of the standard deviations of track alignment, unevenness and twist. The BFI was developed based on the data obtained from the ground penetration radar (GPR). Making use of the new indices, a more reliable maintenance algorithm was developed. Through illustrations of the applicability of the new maintenance algorithm in a railway line, it was shown that the new algorithm causes a considerable improvement in the maintenance effectiveness and an increase in the life cycle of railway tracks by making more effective allocation of resources and more accurate maintenance planning.

Hybrid composites prepared from Industrial waste: Mechanical and swelling behavior

PubMed Central

Ahmed, Khalil

2013-01-01

In this assessment, hybrid composites were prepared from the combination of industrial waste, as marble waste powder (MWP) with conventional fillers, carbon black (CB) as well as silica as reinforcing material, incorporated with natural rubber (NR). The properties studied were curing, mechanical and swelling behavior. Assimilation of CB as well as silica into MWP containing NR compound responded in decreasing the scorch time and cure time besides increasing in the torque. Additionally, increasing the CB and silica in their respective NR hybrid composite increases the tensile, tear, modulus, hardness, and cross-link density, but decreases the elongation and swelling coefficient. The degradation property e.g., thermal aging of the hybrid composite was also estimated. The overall behavior at 70 °C aging temperature signified that the replacement of MS by CB and silica improved the aging performance. PMID:25750756

The epigenetic impacts of social stress: how does social adversity become biologically embedded?

PubMed Central

Cunliffe, Vincent T

2016-01-01

Epigenetic mechanisms are implicated in the processes through which social stressors erode health in humans and other animals. Here I review progress in elucidating the biological pathways underlying the social gradient in health, with particular emphasis on how behavioral stresses influence epigenomic variation linked to health. The evidence that epigenetic changes are involved in embedding of social status-linked chronic stress is reviewed in the context of current knowledge about behavior within animal dominance hierarchies and the impacts of social position on behaviors that affect health. The roles of epigenetic mechanisms in responses to trauma and the evidence for their involvement in intergenerational transmission of the biological impacts of traumatic stress are also considered. Taken together, the emerging insights have important implications for development of strategies to improve societal health and well-being. PMID:27869483

Rapid shape memory TEMPO-oxidized cellulose nanofibers/polyacrylamide/gelatin hydrogels with enhanced mechanical strength.

PubMed

Li, Nan; Chen, Wei; Chen, Guangxue; Tian, Junfei

2017-09-01

TEMPO-oxidized cellulose nanofibers/polyacrylamide/gelatin shape memory hydrogels were successfully fabricated through a facile in-situ free-radical polymerization method, and double network was formed by chemically cross-linked polyacrylamide (PAM) network and physically cross-linked gelatin network. TEMPO-oxidized cellulose nanofibers (TOCNs) were introduced to improve the mechanical properties of the hydrogel. The structure, shape memory behaviors and mechanical properties of the resulting composite gels with varied gel compositions were investigated. The results obtained from those different studies revealed that TOCNs, gelatin, and PAM could mix with each other homogeneously. Due to the thermoreversible nature of the gelatin network, the composite hydrogels exhibited attractive thermo-induced shape memory properties. In addition, good mechanical properties (strength >200kPa, strain >650%) were achieved. Such composite hydrogels with good shape memory behavior and enhanced mechanical strength would be an attractive candidate for a wide variety of applications. Copyright © 2017 Elsevier Ltd. All rights reserved.

Wool shrinkproofing by chemical and ezymatic methods

USDA-ARS?s Scientific Manuscript database

The uniqueness of wool, its functionality, morphology, physical/ mechanical behavior, and aesthetics, continue to be topics for innovative research to improve properties and create novel products. The perennial problems of yellowness, discomfort in wear, and shrinkage have been addressed over time ...

Modified unified kinetic scheme for all flow regimes.

PubMed

Liu, Sha; Zhong, Chengwen

2012-06-01

A modified unified kinetic scheme for the prediction of fluid flow behaviors in all flow regimes is described. The time evolution of macrovariables at the cell interface is calculated with the idea that both free transport and collision mechanisms should be considered. The time evolution of macrovariables is obtained through the conservation constraints. The time evolution of local Maxwellian distribution is obtained directly through the one-to-one mapping from the evolution of macrovariables. These improvements provide more physical realities in flow behaviors and more accurate numerical results in all flow regimes especially in the complex transition flow regime. In addition, the improvement steps introduce no extra computational complexity.

Evaluation Influence: The Evaluation Event and Capital Flow in International Development.

PubMed

Bell, David A

2017-12-01

Assessing program effectiveness in human development is central to informing foreign aid policy-making and organizational learning. Foreign aid effectiveness discussions have increasingly given attention to the devaluing effects of aid flow volatility. This study reveals that the external evaluation event influences actor behavior, serving as a volatility-constraining tool. A case study of a multidonor aid development mechanism served examining the influence of an evaluation event when considering anticipatory effects. The qualitative component used text and focus group data combined with individual interview data (organizations n = 10, including 26 individuals). Quantitative data included financial information on all 75 capital investments. The integrated theory of influence and model of alternative mechanisms used these components to identify the linkage between the evaluation event and capital flow volatility. Aid approved in the year of the midterm evaluation was disbursed by the mechanism with low capital volatility. Anticipating the evaluation event influenced behavior resulting in an empirical record that program outcomes were enhanced and the mechanism was an improved organization. Formative evaluations in a development program can trigger activity as an interim process. That activity provides for a more robust assessment of ultimate consequence of interest. Anticipating an evaluation can stimulate donor reality testing. The findings inform and strengthen future research on the influence of anticipating an evaluation. Closely examining activities before, during, and shortly after the evaluation event can aid development of other systematic methods to improve understanding this phenomenon, as well as improve donor effectiveness strategies.

Novel rodent model of breast cancer survival with persistent anxiety-like behavior and inflammation.

PubMed

Pyter, Leah M; Suarez-Kelly, Lorena P; Carson, William E; Kaur, Jasskiran; Bellisario, Joshua; Bever, Savannah R

2017-07-14

Breast cancer survivors are an expanding population that is troubled by lasting mental health problems, including depression and anxiety. These issues reduce quality-of-life throughout survivorhood. Research indicates that tumor biology, cancer treatments, and stress contribute to these mood disturbances. Although the mechanisms underlying these various causes remain under investigation, neuroinflammation is a leading hypothesis. To date, rodent models of recurrence-free tumor survival for understanding mechanisms by which these behavioral issues persist after cancer are lacking. Here, we test the extent to which potential behavioral symptoms persist after mammary tumor removal in mice (i.e., establishment of a cancer survivor model), while also empirically testing the causal role of tumors in the development of neuroinflammatory-mediated affective-like behaviors. Complete surgical resection of a non-metastatic orthotopic, syngeneic mammary tumor reversed tumor-induced increases of circulating cytokines (IL-6, CXCL1, IL-10) and myeloid-derived cells and modulated neuroinflammatory gene expression (Cd11b, Cxcl1). Multiple anxiety-like behaviors and some central and peripheral immune markers persisted or progressed three weeks after tumor resection. Together, these data indicate that persistent behavioral changes into cancer survivorhood may be due, in part, to changes in immunity that remain even after successful tumor removal. This novel survivor paradigm represents an improvement in modeling prevalent cancer survivorship issues and studying the basic mechanisms by which cancer/cancer treatments influence the brain and behavior. Copyright © 2017 Elsevier B.V. All rights reserved.

Development of an external ceramic insulation for the space shuttle orbiter. Part 2: Optimization

NASA Technical Reports Server (NTRS)

Tanzilli, R. A. (Editor)

1973-01-01

The basic insulation improvement study concentrated upon evaluating variables which could result in significant near-term gains in mechanical behavior and insulation effectiveness of the baseline system. The approaches undertaken included: evaluation of small diameter fibers, optimization of binder: slurry characteristics, evaluation of techniques for controlling fiber orientation, optimization of firing cycle, and the evaluation of methods for improving insulation efficiency. A detailed discussion of these basic insulation improvement studies is presented.

Stress-strain time-dependent behavior of A356.0 aluminum alloy subjected to cyclic thermal and mechanical loadings

NASA Astrophysics Data System (ADS)

Farrahi, G. H.; Ghodrati, M.; Azadi, M.; Rezvani Rad, M.

2014-08-01

This article presents the cyclic behavior of the A356.0 aluminum alloy under low-cycle fatigue (or isothermal) and thermo-mechanical fatigue loadings. Since the thermo-mechanical fatigue (TMF) test is time consuming and has high costs in comparison to low-cycle fatigue (LCF) tests, the purpose of this research is to use LCF test results to predict the TMF behavior of the material. A time-independent model, considering the combined nonlinear isotropic/kinematic hardening law, was used to predict the TMF behavior of the material. Material constants of this model were calibrated based on room-temperature and high-temperature low-cycle fatigue tests. The nonlinear isotropic/kinematic hardening law could accurately estimate the stress-strain hysteresis loop for the LCF condition; however, for the out-of-phase TMF, the condition could not predict properly the stress value due to the strain rate effect. Therefore, a two-layer visco-plastic model and also the Johnson-Cook law were applied to improve the estimation of the stress-strain hysteresis loop. Related finite element results based on the two-layer visco-plastic model demonstrated a good agreement with experimental TMF data of the A356.0 alloy.

Prone position improves lung mechanical behavior and enhances gas exchange efficiency in mechanically ventilated chronic obstructive pulmonary disease patients.

PubMed

Mentzelopoulos, Spyros D; Zakynthinos, Spyros G; Roussos, Charris; Tzoufi, Maria J; Michalopoulos, Argyris S

2003-06-01

Pronation might favorably affect respiratory system (rs) mechanics and function in volume-controlled, mode-ventilated chronic obstructive pulmonary disease (COPD) patients. We studied 10 COPD patients, initially positioned supine (baseline supine [supine(BAS)]) and then randomly and consecutively changed to protocol supine (supine(PROT)), semirecumbent, and prone positions. Rs mechanics and inspiratory work (W(I)) were assessed at baseline (0.6 L) (all postures) and sigh (1.2 L) (supine(BAS) excluded) tidal volume (V(T)) with rapid airway occlusion during constant-flow inflation. Hemodynamics and gas exchange were assessed in all postures. There were no complications. Prone positioning resulted in (a) increased dynamic-static chest wall (cw) elastance (at both V(Ts)) and improved oxygenation versus supine(BAS), supine(PROT), and semirecumbent, (b) decreased additional lung (L) resistance-elastance versus supine(PROT) and semirecumbent at sigh V(T), (c) decreased L-static elastance (at both V(Ts)) and improved CO(2) elimination versus supine(BAS) and supine(PROT), and (d) improved oxygenation versus all other postures. Semirecumbent positioning increased mainly additional cw-resistance versus supine(BAS) and supine(PROT) at baseline. V(T) W(I)-sub-component changes were consistent with changes in rs, cw, and L mechanical properties. Total rs-W(I) and hemodynamics were unaffected by posture change. After pronation, five patients were repositioned supine (supine(POSTPRO)). In supine(POSTPRO), static rs-L elastance were lower, and oxygenation was still improved versus supine(BAS). Pronation of mechanically ventilated COPD patients exhibits applicability and effectiveness and improves oxygenation and sigh-L mechanics versus semirecumbent ("gold standard") positioning. By assessing respiratory mechanics, inspiratory work, hemodynamics, and gas exchange, we showed that prone positioning of mechanically ventilated chronic obstructed pulmonary disease patients improves oxygenation and lung mechanics during sigh versus semirecumbent positioning. Furthermore, certain pronation-related benefits versus preprone-supine positioning (reduced lung elastance and improved oxygenation) are maintained in the postprone supine position.

Interactive Two-Way mHealth Interventions for Improving Medication Adherence: An Evaluation Using The Behaviour Change Wheel Framework

PubMed Central

Amico, K Rivet; Atkins, Lou; Lester, Richard T

2018-01-01

Background Medication adherence is an important but highly complex set of behaviors, which for life-threatening and infectious diseases such as HIV carry critical consequences for individual and public health. There is growing evidence that mobile phone text messaging interventions (mHealth) connecting providers with patients positively impact medication adherence, particularly two-way engagement platforms that require bidirectional communication versus one-way in which responses are not mandatory. However, mechanisms of action have not been well defined. The Behavior Change Wheel is a comprehensive framework for behavior change that includes an all-encompassing model of behavior known as Capability Opportunity Motivation-Behavior and is complemented by a taxonomy of behavior change techniques. Evaluating mHealth interventions for medication adherence using these tools could provide useful insights that may contribute to optimizing their integration into the healthcare system and successful scaling-up. Objective This study aimed to help address the current knowledge gap regarding how two-way mHealth interventions for medication adherence may work by applying the Behavior Change Wheel to characterize WelTel: an interactive digital health outreach platform with robust evidence for improving adherence to antiretroviral therapy. Methods To characterize how WelTel may promote medication adherence, we applied the Behavior Change Wheel to systematically (1) generate a behavioral diagnosis through mapping known antiretroviral therapy adherence barriers onto the Capability Opportunity Motivation-Behavior model of behavior, (2) specify the behavior change techniques that WelTel delivers, (3) link identified behavior change techniques to corresponding intervention functions of the Behavior Change Wheel, and (4) connect these behavior change techniques and intervention functions to respective Capability Opportunity Motivation-Behavior influences on behavior to determine potential mechanisms of action. Results Our evaluation of WelTel using the Behavior Change Wheel suggests that most of its impact is delivered primarily through its personalized communication component, in which 8 different behavior change techniques were identified and linked with 5 intervention functions (environmental restructuring, enablement, education, persuasion, and training). Its mechanisms of action in promoting antiretroviral therapy adherence may involve addressing all Capability Opportunity Motivation-Behavior influences on behavior (physical and psychological capability, physical and social opportunity, reflective and automatic motivation). Conclusions Systematically unpacking the potential active ingredients of effective interventions facilitates the creation and implementation of more parsimonious, tailored, and targeted approaches. Evaluating WelTel using the Behavior Change Wheel has provided valuable insights into how and why such interactive two-way mHealth interventions may produce greater impact than one-way in addressing both nonintentional and intentional forms of nonadherence. The application of the Behavior Change Wheel for evidence synthesis across mHealth interventions targeting various conditions would contribute to strengthening the knowledge base regarding how they may work to impact medication adherence behavior. PMID:29650504

Interactive Two-Way mHealth Interventions for Improving Medication Adherence: An Evaluation Using The Behaviour Change Wheel Framework.

PubMed

Chiang, Nicole; Guo, Michael; Amico, K Rivet; Atkins, Lou; Lester, Richard T

2018-04-12

Medication adherence is an important but highly complex set of behaviors, which for life-threatening and infectious diseases such as HIV carry critical consequences for individual and public health. There is growing evidence that mobile phone text messaging interventions (mHealth) connecting providers with patients positively impact medication adherence, particularly two-way engagement platforms that require bidirectional communication versus one-way in which responses are not mandatory. However, mechanisms of action have not been well defined. The Behavior Change Wheel is a comprehensive framework for behavior change that includes an all-encompassing model of behavior known as Capability Opportunity Motivation-Behavior and is complemented by a taxonomy of behavior change techniques. Evaluating mHealth interventions for medication adherence using these tools could provide useful insights that may contribute to optimizing their integration into the healthcare system and successful scaling-up. This study aimed to help address the current knowledge gap regarding how two-way mHealth interventions for medication adherence may work by applying the Behavior Change Wheel to characterize WelTel: an interactive digital health outreach platform with robust evidence for improving adherence to antiretroviral therapy. To characterize how WelTel may promote medication adherence, we applied the Behavior Change Wheel to systematically (1) generate a behavioral diagnosis through mapping known antiretroviral therapy adherence barriers onto the Capability Opportunity Motivation-Behavior model of behavior, (2) specify the behavior change techniques that WelTel delivers, (3) link identified behavior change techniques to corresponding intervention functions of the Behavior Change Wheel, and (4) connect these behavior change techniques and intervention functions to respective Capability Opportunity Motivation-Behavior influences on behavior to determine potential mechanisms of action. Our evaluation of WelTel using the Behavior Change Wheel suggests that most of its impact is delivered primarily through its personalized communication component, in which 8 different behavior change techniques were identified and linked with 5 intervention functions (environmental restructuring, enablement, education, persuasion, and training). Its mechanisms of action in promoting antiretroviral therapy adherence may involve addressing all Capability Opportunity Motivation-Behavior influences on behavior (physical and psychological capability, physical and social opportunity, reflective and automatic motivation). Systematically unpacking the potential active ingredients of effective interventions facilitates the creation and implementation of more parsimonious, tailored, and targeted approaches. Evaluating WelTel using the Behavior Change Wheel has provided valuable insights into how and why such interactive two-way mHealth interventions may produce greater impact than one-way in addressing both nonintentional and intentional forms of nonadherence. The application of the Behavior Change Wheel for evidence synthesis across mHealth interventions targeting various conditions would contribute to strengthening the knowledge base regarding how they may work to impact medication adherence behavior. ©Nicole Chiang, Michael Guo, K Rivet Amico, Lou Atkins, Richard T Lester. Originally published in JMIR Mhealth and Uhealth (http://mhealth.jmir.org), 12.04.2018.

Anti-inflammatory Effect of Astaxanthin on the Sickness Behavior Induced by Diabetes Mellitus.

PubMed

Ying, Chang-jiang; Zhang, Fang; Zhou, Xiao-yan; Hu, Xiao-tong; Chen, Jing; Wen, Xiang-ru; Sun, Ying; Zheng, Kui-yang; Tang, Ren-xian; Song, Yuan-jian

2015-10-01

Chronic inflammation appears to play a critical role in sickness behavior caused by diabetes mellitus. Astaxanthin has been used in treating diabetes mellitus and diabetic complications because of its neuroprotective and anti-inflammatory actions. However, whether astaxanthin can improve sickness behavior induced by diabetes and its potential mechanisms are still unknown. The aim of this study was to investigate the effects of astaxanthin on diabetes-elicited abnormal behavior in mice and its corresponding mechanisms. An experimental diabetic model was induced by streptozotocin (150 mg/kg) and astaxanthin (25 mg/kg/day) was provided orally for 10 weeks. Body weight and water consumption were measured, and the sickness behavior was evaluated by the open field test (OFT) and closed field test (CFT). The expression of glial fibrillary acidic protein (GFAP) was measured, and the frontal cortical cleaved caspase-3 positive cells, interleukin-6 (IL-6), and interleukin-1β (IL-1β) expression levels were also investigated. Furthermore, cystathionine β-synthase (CBS) in the frontal cortex was detected to determine whether the protective effect of astaxanthin on sickness behavior in diabetic mice is closely related to CBS. As expected, we observed that astaxanthin improved general symptoms and significantly increase horizontal distance and the number of crossings in the OFT and CFT. Furthermore, data showed that astaxanthin could decrease GFAP-positive cells in the brain and down-regulate the cleaved caspase-3, IL-6, and IL-1β, and up-regulate CBS in the frontal cortex. These results suggest that astaxanthin provides neuroprotection against diabetes-induced sickness behavior through inhibiting inflammation, and the protective effects may involve CBS expression in the brain.

Thalamic stimulation to improve level of consciousness after seizures: evaluation of electrophysiology and behavior.

PubMed

Gummadavelli, Abhijeet; Motelow, Joshua E; Smith, Nicholas; Zhan, Qiong; Schiff, Nicholas D; Blumenfeld, Hal

2015-01-01

Understanding the neural mechanisms that support human consciousness is an important frontier in neuroscience and medicine. We previously developed a rodent model of temporal lobe seizures that recapitulates the human electroencephalography (EEG) signature of ictal and postictal neocortical slow waves associated with behavioral impairments in level of consciousness. The mechanism of slow-wave production in epilepsy may involve suppression of the subcortical arousal systems including the brainstem and intralaminar thalamic nuclei. We hypothesized that intralaminar thalamic stimulation may lead to electrophysiologic and functional rescue from postictal slow waves and behavioral arrest. We electrically stimulated the central lateral thalamic nucleus (a member of the intralaminar nuclei) under anesthesia and after electrically induced hippocampal seizures in anesthetized and in awake-behaving animal model preparations. We demonstrated a proof-of-principle restoration of electrophysiologic and behavioral measures of consciousness by stimulating the intralaminar thalamic nuclei after seizures. We measured decreased cortical slow waves and increased desynchronization and multiunit activity in the cortex with thalamic stimulation following seizures. Functionally, thalamic stimulation produced resumption of exploratory behaviors in the postictal state. Targeting of nodes in the neural circuitry of consciousness has important medical implications. Impaired consciousness with epilepsy has dangerous consequences including decreased school/work performance, social stigmatization, and impaired airway protection. These data suggest a novel therapeutic approach for restoring consciousness after seizures. If paired with responsive neurostimulation, this may allow rapid implementation to improve level of consciousness in patients with epilepsy. Wiley Periodicals, Inc. © 2014 International League Against Epilepsy.

Azimuthal Spoke Propagation in Hall Effect Thrusters

DTIC Science & Technology

2013-08-01

on mode transitions clearly shows that spoke behavior was dominant in so-called ”local oscillation mode” where the thruster exhibited lower mean...discharge current and discharge current oscillation amplitude. The H6 thrust-to-power are maximum when the thruster is operating in local mode with spokes...the H6 drives us to understand the fundamental mechanisms of spoke mechanics in order to improve thruster operation. II. Mode Transition Oscillations

Effect of Graphene Addition on Shape Memory Behavior of Epoxy Resins

NASA Technical Reports Server (NTRS)

Williams, Tiffany; Meador, Michael; Miller, Sandi; Scheiman, Daniel

2011-01-01

Shape memory polymers (SMPs) and composites are a special class of smart materials known for their ability to change size and shape upon exposure to an external stimulus (e.g. light, heat, pH, or magnetic field). These materials are commonly used for biomedical applications; however, recent attempts have been made towards developing SMPs and composites for use in aircraft and space applications. Implementing SMPs and composites to create a shape change effect in some aircraft structures could potentially reduce drag, decrease fuel consumption, and improve engine performance. This paper discusses the development of suitable materials to use in morphing aircraft structures. Thermally responsive epoxy SMPs and nanocomposites were developed and the shape memory behavior and thermo-mechanical properties were studied. Overall, preliminary results from dynamic mechanical analysis (DMA) showed that thermally actuated shape memory epoxies and nanocomposites possessed Tgs near approximately 168 C. When graphene nanofiller was added, the storage modulus and crosslinking density decreased. On the other hand, the addition of graphene enhanced the recovery behavior of the shape memory nanocomposites. It was assumed that the addition of graphene improved shape memory recovery by reducing the crosslinking density and increasing the elasticity of the nanocomposites.

Identification of potential neuromotor mechanisms of manual therapy in patients with musculoskeletal disablement: rationale and description of a clinical trial.

PubMed

Fisher, Beth E; Davenport, Todd E; Kulig, Kornelia; Wu, Allan D

2009-05-21

Many health care practitioners use a variety of hands-on treatments to improve symptoms and disablement in patients with musculoskeletal pathology.Research to date indirectly suggests a potentially broad effect of manual therapy on the neuromotor processing of functional behavior within the supraspinal central nervous system (CNS) in a manner that may be independent of modification at the level of local spinal circuits. However, the effect of treatment speed, as well as the specific mechanism and locus of CNS changes, remain unclear. We developed a placebo-controlled, randomized study to test the hypothesis that manual therapy procedures directed to the talocrural joint in individuals with post-acute ankle sprain induce a change in corticospinal excitability that is relevant to improve the performance of lower extremity functional behavior. This study is designed to identify potential neuromotor changes associated with manual therapy procedures directed to the appendicular skeleton, compare the relative effect of treatment speed on potential neuromotor effects of manual therapy procedures, and determine the behavioral relevance of potential neuromotor effects of manual therapy procedures. http://www.clinicaltrials.gov identifier NCT00847769.

Identification of potential neuromotor mechanisms of manual therapy in patients with musculoskeletal disablement: rationale and description of a clinical trial

PubMed Central

Fisher, Beth E; Davenport, Todd E; Kulig, Kornelia; Wu, Allan D

2009-01-01

Background Many health care practitioners use a variety of hands-on treatments to improve symptoms and disablement in patients with musculoskeletal pathology. Research to date indirectly suggests a potentially broad effect of manual therapy on the neuromotor processing of functional behavior within the supraspinal central nervous system (CNS) in a manner that may be independent of modification at the level of local spinal circuits. However, the effect of treatment speed, as well as the specific mechanism and locus of CNS changes, remain unclear. Methods/Design We developed a placebo-controlled, randomized study to test the hypothesis that manual therapy procedures directed to the talocrural joint in individuals with post-acute ankle sprain induce a change in corticospinal excitability that is relevant to improve the performance of lower extremity functional behavior. Discussion This study is designed to identify potential neuromotor changes associated with manual therapy procedures directed to the appendicular skeleton, compare the relative effect of treatment speed on potential neuromotor effects of manual therapy procedures, and determine the behavioral relevance of potential neuromotor effects of manual therapy procedures. Trial Registration identifier NCT00847769. PMID:19460169

Effect of particle morphology of Ni on the mechanical behavior of AZ91E-Ni coated nano Al2O3 composites

NASA Astrophysics Data System (ADS)

Sameer Kumar, D.; Suman, K. N. S.; Poddar, Palash

2017-06-01

The properties of any composite always depend on the bonding between the matrix and reinforcement phases. One way of improving the wettability of reinforcement in a matrix is to apply a layer of coating on reinforcing particles. The present study aims at developing Ni coating on nano Al2O3 ceramic particles and dispersing them in AZ91E magnesium matrix material. The electroless plating method has been employed to coat the particles and semi solid stir casting technique was adopted to prepare the composites. Several weight fractions of dispersed phase are considered to analyze the behavior of the fabricated composites. Field emission scanning electron microscopy (FESEM) and x-ray diffraction analysis has been carried out to investigate the distribution of particles and phase characteristics of the proposed material. The physical and mechanical behavior of the material was examined through density measurements, hardness, elastic modulus, ductility and tensile strength calculations. The metal coating on reinforcement aids to promote metal-metal bonding interface reactions which result in improved properties of the composite. Tensile fractography was carried out under FESEM and presented.

The mediating role of social support in the relationship between psychological well-being and health-risk behaviors among Chinese university students

PubMed Central

Lai, Catie CW; Ma, Cecilia MS

2016-01-01

While literature has displayed a link between psychological well-being (i.e. depression, hopelessness, and life satisfaction) and health-risk behaviors (i.e. smoking, drinking, suicide, and physical inactivity), the mechanisms underlying this relationship have received little empirical attention. This study examines the mediation effects of social support (from family, friends, and significant others) that accounted for the link. Participants were 2023 university students (47.7% male). Structural equation modeling showed partial mediation effect of social support between psychological well-being and health-risk behaviors. In particular, social support from family and friends jointly mediated about 80 percent of the effect of life satisfaction and hopelessness on drinking. These results offered novel evidence that helps improve theorizing the mechanisms of the relationship between psychological well-being and health-risk behaviors. They also highlighted the potential benefits of social support for university students to help them stay healthy. The implications of these results are discussed. PMID:28070409

Corn Response to Competition: Growth Alteration vs. Yield Limiting Factors

USDA-ARS?s Scientific Manuscript database

Understanding competition mechanisms among adjacent plants can improve site-specific management recommendations. This 2-yr study compared two hypotheses, yield limiting factors vs. behavior modification, to explain plant interactions. Corn was grown under different levels of stress by varying light ...

The effect of a preceding cue on the conflict solving mechanism.

PubMed

Goldfarb, Liat; Henik, Avishai

2013-01-01

In everyday life cues and signs are used in order to improve our performance and to modify and control our behavior. This study examines whether cues can improve the performance of the mental mechanism in charge of solving conflicts when the nature of the irrelevant task remains constant. In two experiments participants performed the Stroop task in which they were asked to name the color of a stimulus while ignoring its meaning. Half the trials were preceded by a conflict-cue containing information about an upcoming conflict. In addition, conflict trial proportions were manipulated. We found that only when the probability of conflict is low can cues alter the conflict solving mechanism. These findings are discussed in the context of the nature of the control mechanism and its tendency to minimize the cost of mental resources.

Mediators of Physical Activity on Neurocognitive Function: A Review at Multiple Levels of Analysis.

PubMed

Stillman, Chelsea M; Cohen, Jamie; Lehman, Morgan E; Erickson, Kirk I

2016-01-01

Physical activity (PA) is known to maintain and improve neurocognitive health. However, there is still a poor understanding of the mechanisms by which PA exerts its effects on the brain and cognition in humans. Many of the most widely discussed mechanisms of PA are molecular and cellular and arise from animal models. While information about basic cellular and molecular mechanisms is an important foundation from which to build our understanding of how PA promotes cognitive health in humans, there are other pathways that could play a role in this relationship. For example, PA-induced changes to cellular and molecular pathways likely initiate changes to macroscopic properties of the brain and/or to behavior that in turn influence cognition. The present review uses a more macroscopic lens to identify potential brain and behavioral/socioemotional mediators of the association between PA and cognitive function. We first summarize what is known regarding cellular and molecular mechanisms, and then devote the remainder of the review to discussing evidence for brain systems and behavioral/socioemotional pathways by which PA influences cognition. It is our hope that discussing mechanisms at multiple levels of analysis will stimulate the field to examine both brain and behavioral mediators. Doing so is important, as it could lead to a more complete characterization of the processes by which PA influences neurocognitive function, as well as a greater variety of targets for modifying neurocognitive function in clinical contexts.

Microstructure and magnetic behavior of Cu-Co-Si ternary alloy synthesized by mechanical alloying and isothermal annealing

NASA Astrophysics Data System (ADS)

Chabri, Sumit; Bera, S.; Mondal, B. N.; Basumallick, A.; Chattopadhyay, P. P.

2017-03-01

Microstructure and magnetic behavior of nanocrystalline 50Cu-40Co-10Si (at%) alloy prepared by mechanical alloying and subsequent isothermal annealing in the temperature range of 450-650 °C have been studied. Phase evolution during mechanical alloying and isothermal annealing is characterized by X-ray diffraction (XRD), differential thermal analyzer (DTA), high resolution transmission electron microscopy (HRTEM) and magnetic measurement. Addition of Si has been found to facilitate the metastable alloying of Co in Cu resulting into the formation of single phase solid solution having average grain size of 9 nm after ball milling for 50 h duration. Annealing of the ball milled alloy improves the magnetic properties significantly and best combination of magnetic properties has been obtained after annealing at 550 °C for 1 h duration.

Ultrasonic approach to the synthesis of HMX@TATB core-shell microparticles with improved mechanical sensitivity.

PubMed

Huang, Bing; Hao, Xiaofei; Zhang, Haobin; Yang, Zhijian; Ma, Zhigang; Li, Hongzhen; Nie, Fude; Huang, Hui

2014-07-01

To improve the safety of sensitive explosive HMX while maintaining explosion performance, a moderately powerful but insensitive explosive TATB was used to coat HMX microparticles via a facile ultrasonic method. By using Estane as surface modifier and nano-sized TATB as the shell layer, the HMX@TATB core-shell microparticles with a monodisperse size and compact shell structure were successfully constructed. Both scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS) results confirmed the formation of perfect core-shell structured composites. Based on a systematic and comparative study of the effect of experimental conditions, a possible formation mechanism of core-shell structure was proposed in detail. Moreover, the perfect core-shell HMX@TATB microparticles exhibited a unique thermal behavior and significantly improved mechanical sensitivity compared with that of the physical mixture. Copyright © 2014 Elsevier B.V. All rights reserved.

Temperament and Attention as Core Mechanisms in the Early Emergence of Anxiety

PubMed Central

Pérez-Edgar, Koraly; Taber-Thomas, Bradley; Auday, Eran; Morales, Santiago

2015-01-01

Anxiety is a pervasive, impairing, and early appearing form of psychopathology. Even when anxiety remits, children remain at a two- to threefold increased risk for the later emergence of a mood disorder. Therefore, it is imperative to identify and examine underlying mechanisms that may shape early emerging patterns of behavior that are associated with anxiety. One of the strongest and first visible risk factors is childhood temperament. In particular, children who are behaviorally inhibited or temperamentally shy are more likely to exhibit signs of anxiety by adolescence. However, not all shy children do so, despite the early risk. We know that attention mechanisms, particularly the presence of attention biases toward or away from threat, can play a critical role in the emergence of anxiety. The current chapter will bring together these separate lines of research to examine the ways in which attention can modulate the documented link between early temperament and later anxiety. In doing so, the chapter will highlight multiple levels of analysis that focus on the behavioral, cognitive, and neural mechanisms in the temperament-attention-anxiety network. The chapter will help identify both markers and mechanisms of risk, supporting future work aimed at improving theory and intervention by focusing on attention biases to environmental threat. PMID:26663953

Behavioral Design Teams: The Next Frontier in Clinical Delivery Innovation?

PubMed

Robertson, Ted; Darling, Matthew; Leifer, Jennifer; Footer, Owen; Gordski, Dani

2017-11-01

A deep understanding of human behavior is critical to designing effective health care delivery models, tools, and processes. Currently, however, few mechanisms exist to systematically apply insights about human behavior to improve health outcomes. Behavioral design teams (BDTs) are a successful model for applying behavioral insights within an organization. Already operational within government, this model can be adapted to function in a health care setting. To explore how BDTs could be applied to clinical care delivery and review models for integrating these teams within health care organizations. Interviews with experts in clinical delivery innovation and applied behavioral science, as well as leaders of existing government BDTs. BDTs are most effective when they enjoy top-level executive support, are co-led by a domain expert and behavioral scientist, collaborate closely with key staff and departments, have access to data and IT support, and operate a portfolio of projects. BDTs could be embedded in health care organizations in multiple ways, including in or just below the CEO’s office, within a quality improvement unit, or within an internal innovation center. When running a portfolio, BDTs achieve a greater number and diversity of insights at lower costs. They also become a platform for strategic learning and scaling.

Neural and Molecular Mechanisms Involved in Controlling the Quality of Feeding Behavior: Diet Selection and Feeding Patterns

PubMed Central

2017-01-01

We are what we eat. There are three aspects of feeding: what, when, and how much. These aspects represent the quantity (how much) and quality (what and when) of feeding. The quantitative aspect of feeding has been studied extensively, because weight is primarily determined by the balance between caloric intake and expenditure. In contrast, less is known about the mechanisms that regulate the qualitative aspects of feeding, although they also significantly impact the control of weight and health. However, two aspects of feeding quality relevant to weight loss and weight regain are discussed in this review: macronutrient-based diet selection (what) and feeding pattern (when). This review covers the importance of these two factors in controlling weight and health, and the central mechanisms that regulate them. The relatively limited and fragmented knowledge on these topics indicates that we lack an integrated understanding of the qualitative aspects of feeding behavior. To promote better understanding of weight control, research efforts must focus more on the mechanisms that control the quality and quantity of feeding behavior. This understanding will contribute to improving dietary interventions for achieving weight control and for preventing weight regain following weight loss. PMID:29053636

Enhanced mechanical properties of self-polymerized polydopamine-coated recycled PLA filament used in 3D printing

NASA Astrophysics Data System (ADS)

Zhao, Xing Guan; Hwang, Kyung-Jun; Lee, Dongoh; Kim, Taemin; Kim, Namsu

2018-05-01

Dopamine readily adsorbs onto almost all kinds of surfaces and develops cohesive strength through self-polymerization; hence, aqueous solutions of dopamine can be used as adhesives. These properties were used to prevent the degradation in the mechanical properties of recycled PLA fabricated by 3D printer. The mechanical properties of 3D printed PLA play a critical role in determining its applications. To reduce the manufacturing cost as well as environmental pollutants, recycling of 3D printed materials has attracted many attentions. However, recycling of polymeric materials causes the degradation of the mechanical properties. Our study is aimed at advancing the current knowledge on the adhesion behavior of polydopamine coatings on PLA pellets used in 3D printing process. Polydopamine was synthesized by oxidative polymerization and used to coat PLA specimens. The adhesion behavior and mechanical properties of the 3D printed specimens were evaluated by tensile tests. It was found that the mechanical properties of recycled specimen with polydopamine coating have been improved. Microstructural and chemical characterization of the coated specimens was carried out using FE-SEM, FTIR, and XPS analyses.

Emergence of Shared Intentionality Is Coupled to the Advance of Cumulative Culture

PubMed Central

2015-01-01

There is evidence that the sharing of intentions was an important factor in the evolution of humans’ unique cognitive abilities. Here, for the first time, we formally model the coevolution of jointly intentional behavior and cumulative culture, showing that rapid techno-cultural advance goes hand in hand with the emergence of the ability to participate in jointly intentional behavior. Conversely, in the absence of opportunities for significant techno-cultural improvement, the ability to undertake jointly intentional behavior is selected against. Thus, we provide a unified mechanism for the suppression or emergence of shared intentions and collaborative behavior in humans, as well as a potential cause of inter-species diversity in the prevalence of such behavior. PMID:26516775

Spatial attention enhances the selective integration of activity from area MT.

PubMed

Masse, Nicolas Y; Herrington, Todd M; Cook, Erik P

2012-09-01

Distinguishing which of the many proposed neural mechanisms of spatial attention actually underlies behavioral improvements in visually guided tasks has been difficult. One attractive hypothesis is that attention allows downstream neural circuits to selectively integrate responses from the most informative sensory neurons. This would allow behavioral performance to be based on the highest-quality signals available in visual cortex. We examined this hypothesis by asking how spatial attention affects both the stimulus sensitivity of middle temporal (MT) neurons and their corresponding correlation with behavior. Analyzing a data set pooled from two experiments involving four monkeys, we found that spatial attention did not appreciably affect either the stimulus sensitivity of the neurons or the correlation between their activity and behavior. However, for those sessions in which there was a robust behavioral effect of attention, focusing attention inside the neuron's receptive field significantly increased the correlation between these two metrics, an indication of selective integration. These results suggest that, similar to mechanisms proposed for the neural basis of perceptual learning, the behavioral benefits of focusing spatial attention are attributable to selective integration of neural activity from visual cortical areas by their downstream targets.

Orofacial neuropathic pain reduces spontaneous burrowing behavior in rats.

PubMed

Deseure, K; Hans, G

2018-07-01

It was recently reported that spontaneous burrowing behavior is decreased after tibial nerve transection, spinal nerve transection and partial sciatic nerve ligation. It was proposed that spontaneous burrowing could be used as a measure of the impact of neuropathic pain after peripheral nerve injury. It has remained unclear whether the reduction in burrowing behavior is caused directly by pain or hypersensitivity in the affected limbs, making it more difficult to perform burrowing, or by a pain induced decrease in the general wellbeing, thus reducing the motivation to burrow. We studied burrowing behavior after infraorbital nerve injury, a model of orofacial neuropathic pain that does not affect the limbs. Burrowing behavior was significantly reduced after infraorbital nerve injury. Isolated face grooming and responsiveness to mechanical von Frey stimulation of the infraorbital nerve territory were significantly increased after infraorbital nerve injury, indicative, respectively, of spontaneous pain and mechanical allodynia. It is concluded that spontaneous burrowing may provide a measure of the global impact of pain on the animal's wellbeing after peripheral nerve injury and incorporation of this behavioral assay in preclinical drug testing may improve the predictive validity of currently used pain models. Copyright © 2018 Elsevier Inc. All rights reserved.

Changes in the neural bases of emotion regulation associated with clinical improvement in children with behavior problems.

PubMed

Lewis, Marc D; Granic, Isabela; Lamm, Connie; Zelazo, Philip David; Stieben, Jim; Todd, Rebecca M; Moadab, Ida; Pepler, Debra

2008-01-01

Children's behavior problems may stem from ineffective cortical mechanisms for regulating negative emotions, and the success of interventions may depend on their impact on such mechanisms. We examined neurophysiological markers associated with emotion regulation in children comorbid for externalizing and internalizing problems before and after treatment. We hypothesized that treatment success would correspond with reduced ventral prefrontal activation, and increased dorsomedial prefrontal activation, at the time point of an event-related potential (ERP) associated with inhibitory control. Twenty-seven 8- to 12-year-old children (with usable data) were tested before and after a 14-week community-based treatment program and assessed as to improvement status. Fifteen 8- to 12-year-olds from the normal population (with usable data) were tested over the same interval. All children completed an emotion-induction go/no-go task while fitted with a 128-channel electrode net at each test session. ERP amplitudes, and estimates of cortical activation in prefrontal regions of interest, were measured at the peak of the "inhibitory" N2 and compared between improvers, nonimprovers, and nonclinical children. ERP amplitudes showed no group differences. However, improvers showed an overall reduction in ventral prefrontal activation from pretreatment to posttreatment, bringing them in line with nonclinical children, whereas ventral activation remained high for nonimprovers. Both improvers and nonimprovers showed high dorsal activation relative to nonclinical children. Supplementary analyses indicated that only ventral prefrontal regions, and only within the N2 time window, showed decreased activity from pre- to posttreatment, suggesting changes in regulatory processes rather than in overall emotional arousal. These cortically mediated changes may permit a reduction in the overengaged, rigid style of emotion regulation characteristic of children with behavior problems.

Treatment of social approach processes in adults with social anxiety disorder.

PubMed

Alden, Lynn E; Buhr, Kristin; Robichaud, Melisa; Trew, Jennifer L; Plasencia, M Leili

2018-06-01

Despite the social impairment associated with social anxiety disorder (SAD), little research has examined the impact of treatment on positive relational functioning. Accordingly, the authors conducted a treatment outcome study to evaluate a cognitive behavior therapy (CBT) regimen augmented by a relational focus (CBT-R) relative to a graduated exposure-applied relaxation (GEAR) regimen and wait list (WL) control. To examine the mechanism(s) that underlies treatment effects, they used structural equation modeling (SEM) to evaluate two potential mediators, change in judgment biases and in safety behaviors. Treatment-seeking adults who met SAD diagnostic criteria (n = 100; 50% women; mean age = 32.9 years.; 36% ethnic minority) were randomly assigned to CBT-R, GEAR, or WL. CBT-R and GEAR participants received 14 group treatment sessions. Social initiation, relationship satisfaction, and a SAD symptom composite were assessed at pre- and postassessment, and 6- and 12-month follow-ups. Intent-to-treat multilevel modeling analyses indicated that the CBT-R regimen resulted in significantly greater improvement relative to GEAR on relationship satisfaction and SAD symptoms. SEM results revealed that change in safety behaviors partially mediated the superior performance of CBT-R on both variables with confidence intervals set at .90. These findings indicate that CBT-based regimens can improve social approach processes in individuals with SAD and that safety behavior reduction contributes to positive outcomes. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

Evaluation of a telenovela designed to improve knowledge and behavioral intentions among Hispanic patients with end-stage renal disease in Southern California.

PubMed

Forster, Myriam; Allem, Jon-Patrick; Mendez, Nicole; Qazi, Yasir; Unger, Jennifer B

2016-01-01

Culturally relevant education is needed to improve rates of successful kidney transplantation among Hispanic patients with end-stage renal disease (ESRD). This study examined whether patients' knowledge about kidney disease, postoperative care, and proactive health practices improved after watching a telenovela series about ESRD. 334 ESRD patients and 94 family members/caregivers were assigned to watch a telenovela ('Fixing Paco,' a bilingual health education film) or receive standard of care at a transplant center or at a dialysis clinic. Outcomes for pre-transplant patients assigned to standard of care at dialysis centers or at a transplant center were compared to pre-transplant patients in the treatment condition (standard of care + telenovela). Knowledge and behavioral intention scores at baseline across conditions and locations were similar, suggesting that assignment resulted in comparable groups at baseline. Using linear regression, this study found statistically significant improvements in knowledge scores among the telenovela group as compared to the standard of care groups. The telenovela group also had greater improvements in behavioral intention scores compared to the standard of care groups. Family members assigned to the telenovela group had significant improvements in knowledge scores as compared to the standard of care groups. Being well informed about ESRD and adopting proactive health behaviors are important mechanisms in improving transplantation outcomes. These findings suggest that knowledge about kidney disease, postoperative care, and proactive health practices could be improved by viewing a telenovela. Implications, limitations, and directions for future research are discussed.

CaMKII activity is essential for improvement of memory-related behaviors by chronic rivastigmine treatment.

PubMed

Moriguchi, Shigeki; Tagashira, Hideaki; Sasaki, Yuzuru; Yeh, Jay Z; Sakagami, Hiroyuki; Narahashi, Toshio; Fukunaga, Kohji

2014-03-01

Because the cholinergic system is down-regulated in the brain of Alzheimer's disease patients, cognitive deficits in Alzheimer's disease patients are significantly improved by rivastigmine treatment. To address the mechanism underlying rivastigmine-induced memory improvements, we chronically treated olfactory bulbectomized (OBX) mice with rivastigmine. The chronic rivastigmine treatments for 12-13 days starting at 10 days after OBX operation significantly improved memory-related behaviors assessed by Y-maze task, novel object recognition task, passive avoidance task, and Barnes maze task, whereas the single rivastigmine treatment failed to improve the memory. Consistent with the improved memory-related behaviors, long-term potentiation in the hippocampal CA1 region was markedly restored by rivastigmine treatments. In immunoblotting analyses, the reductions of calcium/calmodulin-dependent protein kinase II (CaMKII) autophosphorylation and calcium/calmodulin-dependent protein kinase IV (CaMKIV) phosphorylation in the CA1 region in OBX mice were significantly restored by rivastigmine treatments. In addition, phosphorylation of AMPAR subunit glutamate receptor 1 (GluA1) (Ser-831) and cAMP-responsive element-binding protein (Ser-133) as downstream targets of CaMKII and CaMKIV, respectively, in the CA1 region was also significantly restored by chronic rivastigmine treatments. Finally, we confirmed that rivastigmine-induced improvements of memory-related behaviors and long-term potentiation were not obtained in CaMKIIα(+/-) mice. On the other hand, CaMKIV(-/-) mice did not exhibit the cognitive impairments. Taken together, the stimulation of CaMKII activity in the hippocampus is essential for rivastigmine-induced memory improvement in OBX mice. © 2013 International Society for Neurochemistry.

Mechanical properties, morphology, and hydrolytic degradation behavior of polylactic acid / natural rubber blends

NASA Astrophysics Data System (ADS)

Buys, Y. F.; Aznan, A. N. A.; Anuar, H.

2018-01-01

Due to its biodegradability and renewability, polylactic acid (PLA) has been receiving enormous attention as a potential candidate to replace petroleum based polymers. However, PLA has limitation due to its inherent brittleness. In order to overcome this limitation, blending PLA with elastomeric materials such as natural rubber (NR) are commonly reported. In previous, several researches on PLA/NR blend had been reported, with most of them evaluated the mechanical properties. On the other hand, study of degradation behavior is significance of importance, as controlling materials degradation is required in some applications. This research studied the effect of blend composition on mechanical properties, morphology development, and hydrolytic degradation behavior of PLA/NR blends. Various compositions of PLA/NR blends were prepared by melt blending technique. Tensile test and impact test of the blends were performed to evaluate the mechanical properties. Addition of NR improved the elongation at break and impact strength of the blends, but reduced the tensile strength and stiffness of the specimens. Dynamic Mechanical Analysis (DMA) measurements of the blends displayed two peaks at temperature -70˚C which corresponded to T g of NR and 65˚C which corresponded to T g of PLA. Field Emission Scanning Electron Microscopy (FE-SEM) micrograph of 70/30 PLA/NR specimen also showed two distinct phases, which lead to indication that PLA/NR blends are immiscible. Hydrolytic degradation behavior was evaluated by measuring the remaining weight of the samples immersed in sodium hydroxide solution for a predetermined times. It was shown that the degradation behavior of PLA/NR blends is affected by composition of the blends, with 100 PLA and 70/30 PLA/NR blend showed the fastest degradation rate and 100 NR displayed the slowest one.

Bio-chemo-mechanics of thoracic aortic aneurysms.

PubMed

Wagenseil, Jessica E

2018-03-01

Most thoracic aortic aneurysms (TAAs) occur in the ascending aorta. This review focuses on the unique bio-chemo-mechanical environment that makes the ascending aorta susceptible to TAA. The environment includes solid mechanics, fluid mechanics, cell phenotype, and extracellular matrix composition. Advances in solid mechanics include quantification of biaxial deformation and complex failure behavior of the TAA wall. Advances in fluid mechanics include imaging and modeling of hemodynamics that may lead to TAA formation. For cell phenotype, studies demonstrate changes in cell contractility that may serve to sense mechanical changes and transduce chemical signals. Studies on matrix defects highlight the multi-factorial nature of the disease. We conclude that future work should integrate the effects of bio-chemo-mechanical factors for improved TAA treatment.

Creep Behavior of Hafnia and Ytterbium Silicate Environmental Barrier Coating Systems on SiC/SiC Ceramic Matrix Composites

NASA Technical Reports Server (NTRS)

Zhu, Dongming; Fox, Dennis S.; Ghosn, Louis J.; Harder, Bryan

2011-01-01

Environmental barrier coatings will play a crucial role in future advanced gas turbine engines because of their ability to significantly extend the temperature capability and stability of SiC/SiC ceramic matrix composite (CMC) engine components, thus improving the engine performance. In order to develop high performance, robust coating systems for engine components, appropriate test approaches simulating operating temperature gradient and stress environments for evaluating the critical coating properties must be established. In this paper, thermal gradient mechanical testing approaches for evaluating creep and fatigue behavior of environmental barrier coated SiC/SiC CMC systems will be described. The creep and fatigue behavior of Hafnia and ytterbium silicate environmental barrier coatings on SiC/SiC CMC systems will be reported in simulated environmental exposure conditions. The coating failure mechanisms will also be discussed under the heat flux and stress conditions.

Evaluating the effects of hydroxyapatite coating on the corrosion behavior of severely deformed 316Ti SS for surgical implants.

PubMed

Mhaede, Mansour; Ahmed, Aymen; Wollmann, Manfred; Wagner, Lothar

2015-05-01

The present work investigates the effects of severe plastic deformation by cold rolling on the microstructure, the mechanical properties and the corrosion behavior of austenitic stainless steel (SS) 316Ti. Hydroxyapatite coating (HA) was applied on the deformed material to improve their corrosion resistance. The martensitic transformation due to cold rolling was recorded by X-ray diffraction spectra. The effects of cold rolling on the corrosion behavior were studied using potentiodynamic polarization. The electrochemical tests were carried out in Ringer's solution at 37±1 °C. Cold rolling markedly enhanced the mechanical properties while the electrochemical tests referred to a lower corrosion resistance of the deformed material. The best combination of both high strength and good corrosion resistance was achieved after applying hydroxyapatite coating. Copyright © 2015 Elsevier B.V. All rights reserved.

Poisoning Young Minds.

ERIC Educational Resources Information Center

Schmidt, Charles W.

1999-01-01

Notes that neurobehavioral problems from exposure to lead and other toxins can be observed at doses far below those that cause more obvious signs of exposure. Calls for refining tests of cognitive and developmental skills in exposed children, identifying additional contaminants and mechanisms for behavioral effects, and improving dose- repose…

Biomechanical Behavior of Bioprosthetic Heart Valve Heterograft Tissues: Characterization, Simulation, and Performance

PubMed Central

Soares, Joao S.; Feaver, Kristen R.; Zhang, Will; Kamensky, David; Aggarwal, Ankush; Sacks, Michael S.

2017-01-01

The use of replacement heart valves continues to grow due to the increased prevalence of valvular heart disease resulting from an ageing population. Since bioprosthetic heart valves (BHVs) continue to be the preferred replacement valve, there continues to be a strong need to develop better and more reliable BHVs through and improved the general understanding of BHV failure mechanisms. The major technological hurdle for the lifespan of the BHV implant continues to be the durability of the constituent leaflet biomaterials, which if improved can lead to substantial clinical impact. In order to develop improved solutions for BHV biomaterials, it is critical to have a better understanding of the inherent biomechanical behaviors of the leaflet biomaterials, including chemical treatment technologies, the impact of repetitive mechanical loading, and the inherent failure modes. This review seeks to provide a comprehensive overview of these issues, with a focus on developing insight on the mechanisms of BHV function and failure. Additionally, this review provides a detailed summary of the computational biomechanical simulations that have been used to inform and develop a higher level of understanding of BHV tissues and their failure modes. Collectively, this information should serve as a tool not only to infer reliable and dependable prosthesis function, but also to instigate and facilitate the design of future bioprosthetic valves and clinically impact cardiology. PMID:27507280

Sintered Intermetallic Reinforced 434L Ferritic Stainless Steel Composites

NASA Astrophysics Data System (ADS)

Upadhyaya, A.; Balaji, S.

2009-03-01

The present study examines the effect of aluminide (Ni3Al, Fe3Al) additions on the sintering behavior of ferritic 434L stainless steels during solid-state sintering (SSS) and supersolidus liquid-phase sintering (SLPS). 434L stainless steel matrix composites containing 5 and 10 wt pct of each aluminide were consolidated at 1200 °C (SSS) and 1400 °C (SLPS). The effects of sintering and aluminide additions on the densification, microstructural evolution, mechanical, tribological, and corrosion behavior of sintered ferritic (434L) stainless steels were investigated. The performances of the 434L-aluminide composites were compared with the straight 434L stainless steels processed at similar conditions. Supersolidus sintering resulted in significant improvement in densification, mechanical, wear, and corrosion resistance in both straight 434L and 434L-aluminide composites. Fe3Al additions to 434L stainless steels result in improved wear resistance without significant degradation of corrosion resistance in 3.56 wt pct NaCl solution.

Sharpened cortical tuning and enhanced cortico-cortical communication contribute to the long-term neural mechanisms of visual motion perceptual learning.

PubMed

Chen, Nihong; Bi, Taiyong; Zhou, Tiangang; Li, Sheng; Liu, Zili; Fang, Fang

2015-07-15

Much has been debated about whether the neural plasticity mediating perceptual learning takes place at the sensory or decision-making stage in the brain. To investigate this, we trained human subjects in a visual motion direction discrimination task. Behavioral performance and BOLD signals were measured before, immediately after, and two weeks after training. Parallel to subjects' long-lasting behavioral improvement, the neural selectivity in V3A and the effective connectivity from V3A to IPS (intraparietal sulcus, a motion decision-making area) exhibited a persistent increase for the trained direction. Moreover, the improvement was well explained by a linear combination of the selectivity and connectivity increases. These findings suggest that the long-term neural mechanisms of motion perceptual learning are implemented by sharpening cortical tuning to trained stimuli at the sensory processing stage, as well as by optimizing the connections between sensory and decision-making areas in the brain. Copyright © 2015 Elsevier Inc. All rights reserved.

The role of descriptive norm within the theory of planned behavior in predicting Korean Americans' exercise behavior.

PubMed

Lee, Hyo

2011-08-01

There are few studies investigating psychosocial mechanisms in Korean Americans' exercise behavior. The present study tested the usefulness of the theory of planned behavior in predicting Korean American's exercise behavior and whether the descriptive norm (i.e., perceptions of what others do) improved the predictive validity of the theory of planned behavior. Using a retrospective design and self-report measures, web-survey responses from 198 Korean-American adults were analyzed using hierarchical regression analyses. The theory of planned behavior constructs accounted for 31% of exercise behavior and 43% of exercise intention. Intention and perceived behavioral control were significant predictors of exercise behavior. Although the descriptive norm did not augment the theory of planned behavior, all original constructs--attitude, injunctive norm (a narrow definition of subjective norm), and perceived behavioral control--statistically significantly predicted leisure-time physical activity intention. Future studies should consider random sampling, prospective design, and objective measures of physical activity.

Behavioral flexibility as a mechanism for coping with climate change

USGS Publications Warehouse

Beever, Erik; Hall, L. Embere; Varner, Johanna; Loosen, Anne E.; Dunham, Jason B.; Gahl, Megan K.; Smith, Felisa A.; Lawler, Joshua J.

2017-01-01

Of the primary responses to contemporary climate change – “move, adapt, acclimate, or die” – that are available to organisms, “acclimate” may be effectively achieved through behavioral modification. Behavioral flexibility allows animals to rapidly cope with changing environmental conditions, and behavior represents an important component of a species’ adaptive capacity in the face of climate change. However, there is currently a lack of knowledge about the limits or constraints on behavioral responses to changing conditions. Here, we characterize the contexts in which organisms respond to climate variability through behavior. First, we quantify patterns in behavioral responses across taxa with respect to timescales, climatic stimuli, life-history traits, and ecology. Next, we identify existing knowledge gaps, research biases, and other challenges. Finally, we discuss how conservation practitioners and resource managers can incorporate an improved understanding of behavioral flexibility into natural resource management and policy decisions.

Future directions of multiple behavior change research.

PubMed

Geller, Karly; Lippke, Sonia; Nigg, Claudio R

2017-02-01

Non-communicable diseases (i.e., chronic diseases including cardiovascular disease, cancer, chronic respiratory disease, diabetes and obesity) result in 36 million deaths each year. Individuals' habitual participation in a single health-risk behaviors substantially contribute to morbidity and mortality (e.g., tobacco use, daily fast food intake, etc.); however, more concerning is the impact of typically co-occurring or clustering of multiple health-risk behaviors. This burden can be minimized through successful cessation of health-risk behaviors and adoption of healthy behaviors; namely healthy lifestyle adoption or multiple health behavior change (MHBC). MHBC is a developing field and future research recommendations are provided to advance MHBC research. A valid measure of MHBC (i.e., lifestyle) is warranted to provide the needed basis for MHBC investigations and evaluations. MHBC is thought to occur through shared co-variation of underlying motivating mechanisms, but how these relationships influence behavior remains unclear. A better understanding of the relationship between behaviors and the related motivating mechanisms (and potential cross-relationship of influences) is needed. Future research should also aim to improve lifestyles through understanding how to change multiple health behaviors. Finally, MHBC research should target the development of sustainable interventions which result in lasting effects (e.g., capacity, systems, policy and environmental changes), with dissemination considered during development. Focusing MHBC research in these areas will increase our understanding and maximize the impact on the health of populations.

Enhancing S4 with Guidance from the Features of Other Behavior Modeling Systems

DTIC Science & Technology

2010-11-01

recommendations for updating S4 into a more realistic system for modeling human cognition. We focus on three areas of cognition: perception , memory, and...Research Integration Tool (IMPRINT) .........................6  4.  Improving the Cognitive Mechanisms of S4 7  4.1  Perception , Memory and Decision...Making in S4 ...........................................................7  4.2  Possible Improvements for Perception in S4

psiTurk: An open-source framework for conducting replicable behavioral experiments online.

PubMed

Gureckis, Todd M; Martin, Jay; McDonnell, John; Rich, Alexander S; Markant, Doug; Coenen, Anna; Halpern, David; Hamrick, Jessica B; Chan, Patricia

2016-09-01

Online data collection has begun to revolutionize the behavioral sciences. However, conducting carefully controlled behavioral experiments online introduces a number of new of technical and scientific challenges. The project described in this paper, psiTurk, is an open-source platform which helps researchers develop experiment designs which can be conducted over the Internet. The tool primarily interfaces with Amazon's Mechanical Turk, a popular crowd-sourcing labor market. This paper describes the basic architecture of the system and introduces new users to the overall goals. psiTurk aims to reduce the technical hurdles for researchers developing online experiments while improving the transparency and collaborative nature of the behavioral sciences.

Continuous fiber-reinforced titanium aluminide composites

NASA Technical Reports Server (NTRS)

Mackay, R. A.; Brindley, P. K.; Froes, F. H.

1991-01-01

An account is given of the fabrication techniques, microstructural characteristics, and mechanical behavior of a lightweight, high service temperature SiC-reinforced alpha-2 Ti-14Al-21Nb intermetallic-matrix composite. Fabrication techniques under investigation to improve the low-temperature ductility and environmental resistance of this material system, while reducing manufacturing costs to competitive levels, encompass powder-cloth processing, foil-fiber-foil processing, and thermal-spray processing. Attention is given to composite microstructure problems associated with fiber distribution and fiber-matrix interfaces, as well as with mismatches of thermal-expansion coefficient; major improvements are noted to be required in tensile properties, thermal cycling effects, mechanical damage, creep, and environmental effects.

Souvenaid reduces behavioral deficits and improves social cognition skills in frontotemporal dementia: a proof-of-concept study.

PubMed

Pardini, Matteo; Serrati, Carlo; Guida, Silvia; Mattei, Chiara; Abate, Lucia; Massucco, Davide; Sassos, Davide; Amore, Mario; Krueger, Frank; Cocito, Leonardo; Emberti Gialloreti, Leonardo

2015-01-01

Souvenaid™ is a nutraceutical compound thought to positively enhance synaptic function. In line with this mechanism of action, Souvenaid™ has been shown to improve cognitive function in subjects with mild Alzheimer's disease in randomized clinical trials. To date, however, the potential of Souvenaid™ to improve cognitive functioning in subjects with other neurodegenerative conditions also characterized by synaptic loss has not been explored. To evaluate the impact of Souvenaid™ on executive functions, social cognition and behavioral disturbances in subjects with the behavioral variant of frontotemporal dementia (bv-FTD). Twenty-six subjects with bv-FTD were enrolled in the study and randomized to Souvenaid™ (125 ml/day) or placebo groups. After 12 weeks, subjects were switched between the two groups. All subjects, blinded to treatment, underwent clinical and cognitive evaluations at enrollment, after 12 weeks and after 24 weeks. Treatment with Souvenaid™ was associated with a significant reduction of behavioral symptoms and an increase in Theory of Mind skills compared to placebo, which both returned to baseline when Souvenaid™ was discontinued. Souvenaid™ did not have an effect on executive functions. Our results provide evidence of the potential of Souvenaid™ therapy for the treatment of behavioral disturbances and social cognition skills in FTD. © 2015 S. Karger AG, Basel.

A COMBINED EFFECT OF DEXTROMETHORPHAN AND MELATONIN ON NEUROPATHIC PAIN BEHAVIOR IN RATS

PubMed Central

Wang, Shuxing; Zhang, Lin; Lim, Grewo; Sung, Backil; Tian, Yinghong; Chou, Chiu-Wen; Hernstadt, Hayley; Rusanescu, Gabriel; Ma, Yuxin; Mao, Jianren

2009-01-01

Previous study has shown that administration of melatonin into the anterior cingulate cortex contralateral to peripheral nerve injury prevented exacerbation of mechanical allodynia with a concurrent improvement of depression-like behavior in Wistar-Kyoto (WKY) rats, a genetic variation of Wistar rats. In the present study, we examined the effect of the individual versus combined treatment of melatonin and/or dextromethorphan (DM), a clinically available N-methyl-D-aspartate (NMDA) receptor antagonist, on pain behaviors in WKY rats with chronic constriction sciatic nerve injury (CCI). Pain behaviors (thermal hyperalgesia and mechanical allodynia) were established at one week after CCI. WKY rats were then treated intraperitoneally with various doses of melatonin, DM or their combination once daily for the following week. At the end of this one-week treatment, behavioral tests were repeated in these same rats. While DM alone was effective in reducing thermal hyperalgesia at three tested doses (15, 30 or 60 mg/kg), it reduced mechanical allodynia only at high doses (30 or 60 mg/kg). By comparison, administration of melatonin alone was effective in reducing thermal hyperalgesia only at the highest dose (120 mg/kg, but not 30 or 60 mg/kg) tested in this experiment. Melatonin alone failed to reverse allodynia at all three tested doses (30, 60 and 120 mg/kg). However, the combined intraperitoneal administration of melatonin (30 mg/kg) and DM (15 mg/kg) effectively reversed both thermal hyperalgesia and mechanical allodynia although each individual dose alone did not reduce pain behaviors. These results suggest that a combination of melatonin with a clinically available NMDA receptor antagonist might be more effective than either drug alone for the treatment of neuropathic pain. PMID:19595681

A combined effect of dextromethorphan and melatonin on neuropathic pain behavior in rats.

PubMed

Wang, Shuxing; Zhang, Lin; Lim, Grewo; Sung, Backil; Tian, Yinghong; Chou, Chiu-Wen; Hernstadt, Hayley; Rusanescu, Gabriel; Ma, Yuxin; Mao, Jianren

2009-09-08

Previous study has shown that administration of melatonin into the anterior cingulate cortex contralateral to peripheral nerve injury prevented exacerbation of mechanical allodynia with a concurrent improvement of depression-like behavior in Wistar-Kyoto (WKY) rats, a genetic variation of Wistar rats. In the present study, we examined the effect of the individual versus combined treatment of melatonin and/or dextromethorphan (DM), a clinically available N-methyl-d-aspartate (NMDA) receptor antagonist, on pain behaviors in WKY rats with chronic constriction sciatic nerve injury (CCI). Pain behaviors (thermal hyperalgesia and mechanical allodynia) were established at one week after CCI. WKY rats were then treated intraperitoneally with various doses of melatonin, DM or their combination once daily for the following week. At the end of this one-week treatment, behavioral tests were repeated in these same rats. While DM alone was effective in reducing thermal hyperalgesia at three tested doses (15, 30 or 60 mg/kg), it reduced mechanical allodynia only at high doses (30 or 60 mg/kg). By comparison, administration of melatonin alone was effective in reducing thermal hyperalgesia only at the highest dose (120 mg/kg, but not 30 or 60 mg/kg) tested in this experiment. Melatonin alone failed to reverse allodynia at all three tested doses (30, 60 and 120 mg/kg). However, the combined intraperitoneal administration of melatonin (30 mg/kg) and DM (15 mg/kg) effectively reversed both thermal hyperalgesia and mechanical allodynia although each individual dose alone did not reduce pain behaviors. These results suggest that a combination of melatonin with a clinically available NMDA receptor antagonist might be more effective than either drug alone for the treatment of neuropathic pain.

Feasibility of silica-hybridized collagen hydrogels as three-dimensional cell matrices for hard tissue engineering.

PubMed

Yu, Hye-Sun; Lee, Eun-Jung; Seo, Seog-Jin; Knowles, Jonathan C; Kim, Hae-Won

2015-09-01

Exploiting hydrogels for the cultivation of stem cells, aiming to provide them with physico-chemical cues suitable for osteogenesis, is a critical demand for bone engineering. Here, we developed hybrid compositions of collagen and silica into hydrogels via a simple sol-gel process. The physico-chemical and mechanical properties, degradation behavior, and bone-bioactivity were characterized in-depth; furthermore, the in vitro mesenchymal stem cell growth and osteogenic differentiation behaviors within the 3D hybrid gel matrices were communicated for the first time. The hydrolyzed and condensed silica phase enabled chemical links with the collagen fibrils to form networked hybrid gels. The hybrid gels showed improved chemical stability and greater resistance to enzymatic degradation. The in vitro apatite-forming ability was enhanced by the hybrid composition. The viscoelastic mechanical properties of the hybrid gels were significantly improved in terms of the deformation resistance to an applied load and the modulus values under a dynamic oscillation. Mesenchymal stem cells adhered well to the hybrid networks and proliferated actively with substantial cytoskeletal extensions within the gel matrices. Of note, the hybrid gels substantially reduced the cell-mediated gel contraction behaviors, possibly due to the stiffer networks and higher resistance to cell-mediated degradation. Furthermore, the osteogenic differentiation of cells, including the expression of bone-associated genes and protein, was significantly upregulated within the hybrid gel matrices. Together with the physico-chemical and mechanical properties, the cellular behaviors observed within 3D gel matrices, being different from the previous approaches reported on 2D substrates, provide new information on the feasibility and usefulness of the silica-collagen system for stem cell culture and tissue engineering of hard tissues. © The Author(s) 2015.

A dialectical behavior therapy skills intervention for women with suicidal behaviors in rural Nepal: A single-case experimental design series.

PubMed

Ramaiya, Megan K; McLean, Caitlin; Regmi, Upasana; Fiorillo, Devika; Robins, Clive J; Kohrt, Brandon A

2018-07-01

Suicide in low- and middle-income countries (LMICs) accounts for 75% of the world's burden of suicide mortality and is the leading single cause of death among Nepali reproductive age women. To advance treatment for suicidal behaviors in LMICs, a single-case experimental design (SCED) was conducted of a culturally adapted Dialectical Behavior Therapy skills intervention for Nepali populations (DBT-N). Ten Nepali women with histories of suicidality participated in the 10-session intervention. Outcomes of emotion regulation, suicidal ideation, depression, anxiety, resilience, and coping skills use were measured at multiple time points pre-intervention, during, and at follow-up. Qualitative interviewing assessed DBT-N's feasibility and acceptability. Participants showed improvements in emotion regulation over the course of treatment, which were associated with increased skills use. Rapid, sustained reductions in suicidal ideation and improvements in resilience were observed after DBT-N initiation. This SCED supports conducting further evaluation of DBT-N through controlled trials with emotion regulation as a target mechanism of action for reducing suicidal behaviors in LMICs. © 2018 Wiley Periodicals, Inc.

Use of multiscale zirconium alloy deformation models in nuclear fuel behavior analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Montgomery, Robert; Tomé, Carlos; Liu, Wenfeng

Accurate prediction of cladding mechanical behavior is a key aspect of modeling nuclear fuel behavior, especially for conditions of pellet-cladding interaction (PCI), reactivity-initiated accidents (RIA), and loss of coolant accidents (LOCA). Current approaches to fuel performance modeling rely on empirical models for cladding creep, growth and plastic deformation, which are limited to the materials and conditions for which the models were developed. CASL has endeavored to improve upon this approach by incorporating a microstructurally-based, atomistically-informed, zirconium alloy mechanical deformation analysis capability into the BISON-CASL engineering scale fuel performance code. Specifically, the viscoplastic self-consistent (VPSC) polycrystal plasticity modeling approach, developed bymore » Lebensohn and Tome´ [2], has been coupled with BISON-CASL to represent the mechanistic material processes controlling the deformation behavior of the cladding. A critical component of VPSC is the representation of the crystallographic orientation of the grains within the matrix material and the ability to account for the role of texture on deformation. The multiscale modeling of cladding deformation mechanisms allowed by VPSC far exceed the functionality of typical semi-empirical constitutive models employed in nuclear fuel behavior codes to model irradiation growth and creep, thermal creep, or plasticity. This paper describes the implementation of an interface between VPSC and BISON-CASL and provides initial results utilizing the coupled functionality.« less

Structural Characteristics and Corrosion Behavior of Bio-Degradable Zn-Li Alloys in Stent Application

NASA Astrophysics Data System (ADS)

Zhao, Shan

Zinc has begun to be studied as a bio-degradable material in recent years due to its excellent corrosion rate and optimal biocompatibility. Unfortunately, pure Zn's intrinsic ultimate tensile strength (UTS; below 120 MPa) is lower than the benchmark (about 300 MPa) for cardiovascular stent materials, raising concerns about sufficient strength to support the blood vessel. Thus, modifying pure Zn to improve its mechanical properties is an important research topic. In this dissertation project, a new Zn-Li alloy has been developed to retain the outstanding corrosion behavior from Zn while improving the mechanical characteristics and uniform biodegradation once it is implanted into the artery of Sprague-Dawley rats. The completed work includes: Manufactured Zn-Li alloy ingots and sheets via induction vacuum casting, melt spinning, hot rolling deformation, and wire electro discharge machining (wire EDM) technique; processed alloy samples using cross sectioning, mounting, etching and polishing technique; • Characterized alloy ingots, sheets and wires using hardness and tensile test, XRD, BEI imaging, SEM, ESEM, FTIR, ICP-OES and electrochemical test; then selected the optimum composition for in vitro and in vivo experiments; • Mimicked the degradation behavior of the Zn-Li alloy in vitro using simulated body fluid (SBF) and explored the relations between corrosion rate, corrosion products and surface morphology with changing compositions; • Explanted the Zn-Li alloy wire in abdominal aorta of rat over 12 months and studied its degradation mechanism, rate of bioabsorption, cytotoxicity and corrosion product migration from histological analysis.

Combined Memantine and Donepezil Treatment Improves Behavioral and Psychological Symptoms of Dementia-Like Behaviors in Olfactory Bulbectomized Mice.

PubMed

Yabuki, Yasushi; Matsuo, Kazuya; Hirano, Koga; Shinoda, Yasuharu; Moriguchi, Shigeki; Fukunaga, Kohji

2017-01-01

Memantine, an uncompetitive N-methyl-D-aspartate receptor antagonist, and the cholinesterase inhibitor, donepezil, are approved in most countries for treating moderate-to-severe Alzheimer's disease (AD). These drugs have different molecular targets; thus, it is expected that the effects of combined treatment would be synergistic. Some reports do show memantine/donepezil synergy in ameliorating cognition in AD model animals, but their combined effects on behavioral and psychological symptoms of dementia (BPSD)-like behaviors have not been addressed. Here, we investigate combined memantine/donepezil effects on cognitive impairment and BPSD-like behaviors in olfactory bulbectomized (OBX) mice. Interestingly, combined administration synergistically improved both depressive-like behaviors and impaired social interaction in OBX mice, whereas only weak synergistic effects on cognitive performance were seen. To address mechanisms underlying these effects, we used in vivo microdialysis study and observed impaired nicotine-induced serotonin (5-HT) release in OBX mouse hippocampus. Combined memantine/donepezil administration, but not single administration of either, significantly antagonized the decrease in nicotine-induced 5-HT release seen in OBX mouse hippocampus. Furthermore, decreased autophosphorylation of calcium/calmodulin dependent protein kinase II (CaMKII) was rescued in hippocampal CA1 and dentate gyrus of OBX mice by combined memantine/donepezil administration. These results suggest that improvement of BPSD-like behaviors by the co-administration of both drugs is in part mediated by enhanced 5-HT release and CaMKII activity in OBX mouse hippocampus. © 2016 S. Karger AG, Basel.

Mechanical properties and shape memory effect of thermal-responsive polymer based on PVA

NASA Astrophysics Data System (ADS)

Lin, Liulan; Zhang, Lingfeng; Guo, Yanwei

2018-01-01

In this study, the effect of content of glutaraldehyde (GA) on the shape memory behavior of a shape memory polymer based on polyvinyl alcohol chemically cross-linked with GA was investigated. Thermal-responsive shape memory composites with three different GA levels, GA-PVA (3 wt%, 5 wt%, 7 wt%), were prepared by particle melting, mold forming and freeze-drying technique. The mechanical properties, thermal properties and shape memory behavior were measured by differential scanning calorimeter, physical bending test and cyclic thermo-mechanical test. The addition of GA to PVA led to a steady shape memory transition temperature and an improved mechanical compressive strength. The composite with 5 wt% of GA exhibited the best shape recoverability. Further increase in the crosslinking agent content of GA would reduce the recovery force and prolong the recovery time due to restriction in the movement of the soft PVA chain segments. These results provide important information for the study on materials in 4D printing.

Sorption/Desorption Behavior and Mechanism of NH4(+) by Biochar as a Nitrogen Fertilizer Sustained-Release Material.

PubMed

Cai, Yanxue; Qi, Hejinyan; Liu, Yujia; He, Xiaowei

2016-06-22

Biochar, the pyrolysis product of biomass material with limited oxygen, has the potential to increase crop production and sustained-release fertilizer, but the understanding of the reason for improving soil fertility is insufficient, especially the behavior and mechanism of ammonium sulfate. In this study, the sorption/desorption effect of NH4(+) by biochar deriving from common agricultural wastes under different preparation temperatures from 200 to 500 °C was studied and its mechanism was discussed. The results showed that biochar displayed excellent retention ability in holding NH4(+) above 90% after 21 days under 200 °C preparation temperature, and it can be deduced that the oxygen functional groups, such as carboxyl and keto group, played the primary role in adsorbing NH4(+) due to hydrogen bonding and electrostatic interaction. The sorption/desorption effect and mechanism were studied for providing an optional way to dispose of agricultural residues into biochar as a nitrogen fertilizer sustained-release material under suitable preparation temperature.

Effect of microstructure on high-temperature mechanical behavior of nickel-base superalloys for turbine disc applications

NASA Astrophysics Data System (ADS)

Sharpe, Heather Joan

2007-05-01

Engineers constantly seek advancements in the performance of aircraft and power generation engines, including, lower costs and emissions, and improved fuel efficiency. Nickel-base superalloys are the material of choice for turbine discs, which experience some of the highest temperatures and stresses in the engine. Engine performance is proportional to operating temperatures. Consequently, the high-temperature capabilities of disc materials limit the performance of gas-turbine engines. Therefore, any improvements to engine performance necessitate improved alloy performance. In order to take advantage of improvements in high-temperature capabilities through tailoring of alloy microstructure, the overall objectives of this work were to establish relationships between alloy processing and microstructure, and between microstructure and mechanical properties. In addition, the projected aimed to demonstrate the applicability of neural network modeling to the field of Ni-base disc alloy development and behavior. The first phase of this work addressed the issue of how microstructure varies with heat treatment and by what mechanisms these structures are formed. Further it considered how superalloy composition could account for microstructural variations from the same heat treatment. To study this, four next-generation Ni-base disc alloys were subjected to various controlled heat-treatments and the resulting microstructures were then quantified. These quantitative results were correlated to chemistry and processing, including solution temperature, cooling rate, and intermediate hold temperature. A complex interaction of processing steps and chemistry was found to contribute to all features measured; grain size, precipitate distribution, grain boundary serrations. Solution temperature, above a certain threshold, and cooling rate controlled grain size, while cooling rate and intermediate hold temperature controlled precipitate formation and grain boundary serrations. Diffusion, both intergranular and grain boundary, was identified as the most pertinent mechanism. Variations in chemistry between alloys created different amounts of gamma/gamma' misfit strain, which affected precipitate size and morphology. Next the question of how a disc alloy with differing microstructures would respond to constant or cyclic stresses as a function of time was addressed. To this end, mechanical testing at elevated temperatures was conducted, including tensile, hardness, creep deformation, creep crack growth and fatigue crack growth. Overall, mechanical properties were primarily related to the cooling rate during processing with hold temperatures being secondary. Whether the impact was positive or negative depended on the behavior under consideration. Fast cooling rates improved yield strength and creep resistance, but were detrimental to creep crack growth rates. The ability of precipitate particles to impede dislocation motion was the most frequently cited mechanism behind structure-property interaction. Neural network models were successfully generated for processing-structure predictions, as well as for structure-property predictions. Training data was limited, none-the-less models were able to predict outputs with minimal relative errors. This was achieved through careful balance between the number of inputs and amount of training data. Despite the demonstrated correlation between microstructure and yield strength, microstructural quantities did not need to be directly inputted. Neural networks were sufficiently sensitive as to infer these effects from processing and chemistry inputs. This result improves the efficiency of this technique, while also demonstrating the capability of neural network techniques. A full program of heat-treatment, microstructure quantification, mechanical testing, and neural network modeling was successfully applied to next generation Ni-base disc alloys. From this work the mechanisms of processing-structure and structure-property relationships were studied. Further, testing results were used to demonstrate the applicability of machine-learning techniques to the development and optimization of this family of superalloys.

Ecological Momentary Assessment and Alcohol Use Disorder Treatment

PubMed Central

Morgenstern, Jon; Kuerbis, Alexis; Muench, Frederick

2014-01-01

The ability to capture real-time data on human behavior inexpensively, efficiently, and accurately holds promise to transform and broaden our understanding of many areas of health science. One approach to acquiring this type of real-time data is ecological momentary assessment (EMA). This method has been used to collect data in many domains of addiction research, including research on the treatment of alcohol use disorders (AUDs). Empirical evidence supports the hypothesis that use of EMA can improve the quality of AUD treatment research when compared with standard assessment methods because it provides more accurate reporting, allows investigators to examine the dynamic unfolding of the behavior change process at an individual level, and can be used to augment and improve clinical assessment and treatment. Overall, the existing literature provides strong support for the advantages of EMA when combined with standard assessment of addictive behaviors in general. Nevertheless, use of EMA in AUD treatment research thus far has been limited, especially in the area of research on mechanisms of behavior change. Existing research indicates, however, that EMA can be used to deliver tailored feedback as a novel and potentially transformative approach to improving AUD treatment. This research area clearly warrants additional future efforts. PMID:26259004

Low-Level Laser Irradiation Improves Depression-Like Behaviors in Mice.

PubMed

Xu, Zhiqiang; Guo, Xiaobo; Yang, Yong; Tucker, Donovan; Lu, Yujiao; Xin, Ning; Zhang, Gaocai; Yang, Lingli; Li, Jizhen; Du, Xiangdong; Zhang, Quanguang; Xu, Xingshun

2017-08-01

Major depressive disorder (MDD) is one of the leading forms of psychiatric disorders, characterized by aversion to mobility, neurotransmitter deficiency, and energy metabolic decline. Low-level laser therapy (LLLT) has been investigated in a variety of neurodegenerative disorders associated with mitochondrial dysfunction and functional impairments. The goal of this study was to examine the effect of LLLT on depression-like behaviors and to explore the potential mechanism by detecting mitochondrial function following LLLT. Depression models in space restriction mice and Abelson helper integration site-1 (Ahi1) knockout (KO) mice were employed in this work. Our results revealed that LLLT effectively improved depression-like behaviors, in the two depression mice models, by decreasing immobility duration in behavioral despair tests. In addition, ATP biosynthesis and the level of mitochondrial complex IV expression and activity were significantly elevated in prefrontal cortex (PFC) following LLLT. Intriguingly, LLLT has no effects on ATP content and mitochondrial complex I-IV levels in other tested brain regions, hippocampus and hypothalamus. As a whole, these findings shed light on a novel strategy of transcranial LLLT on depression improvement by ameliorating neurotransmitter abnormalities and promoting mitochondrial function in PFC. The present work provides concrete groundwork for further investigation of LLLT for depression treatment.

Performance improvement of planar dielectric elastomer actuators by magnetic modulating mechanism

NASA Astrophysics Data System (ADS)

Zhao, Yun-Hua; Li, Wen-Bo; Zhang, Wen-Ming; Yan, Han; Peng, Zhi-Ke; Meng, Guang

2018-06-01

In this paper, a novel planar dielectric elastomer actuator (DEA) with magnetic modulating mechanism is proposed. This design can provide the availability of wider actuation range and larger output force, which are significant indicators to evaluate the performance of DEAs. The DEA tends to be a compact and simple design, and an analytical model is developed to characterize the mechanical behavior. The result shows that the output force induced by the DEA can be improved by 76.90% under a certain applied voltage and initial magnet distance. Moreover, experiments are carried out to reveal the performance of the proposed DEA and validate the theoretical model. It demonstrates that the DEA using magnetic modulating mechanism can enlarge the actuation range and has more remarkable effect with decreasing initial magnet distance within the stable range. It can be useful to promote the applications of DEAs to soft robots and haptic feedback.

Neural predictors of individual differences in response to math tutoring in primary-grade school children

PubMed Central

Supekar, Kaustubh; Swigart, Anna G.; Tenison, Caitlin; Jolles, Dietsje D.; Rosenberg-Lee, Miriam; Fuchs, Lynn; Menon, Vinod

2013-01-01

Now, more than ever, the ability to acquire mathematical skills efficiently is critical for academic and professional success, yet little is known about the behavioral and neural mechanisms that drive some children to acquire these skills faster than others. Here we investigate the behavioral and neural predictors of individual differences in arithmetic skill acquisition in response to 8-wk of one-to-one math tutoring. Twenty-four children in grade 3 (ages 8–9 y), a critical period for acquisition of basic mathematical skills, underwent structural and resting-state functional MRI scans pretutoring. A significant shift in arithmetic problem-solving strategies from counting to fact retrieval was observed with tutoring. Notably, the speed and accuracy of arithmetic problem solving increased with tutoring, with some children improving significantly more than others. Next, we examined whether pretutoring behavioral and brain measures could predict individual differences in arithmetic performance improvements with tutoring. No behavioral measures, including intelligence quotient, working memory, or mathematical abilities, predicted performance improvements. In contrast, pretutoring hippocampal volume predicted performance improvements. Furthermore, pretutoring intrinsic functional connectivity of the hippocampus with dorsolateral and ventrolateral prefrontal cortices and the basal ganglia also predicted performance improvements. Our findings provide evidence that individual differences in morphometry and connectivity of brain regions associated with learning and memory, and not regions typically involved in arithmetic processing, are strong predictors of responsiveness to math tutoring in children. More generally, our study suggests that quantitative measures of brain structure and intrinsic brain organization can provide a more sensitive marker of skill acquisition than behavioral measures. PMID:23630286

Neural predictors of individual differences in response to math tutoring in primary-grade school children.

PubMed

Supekar, Kaustubh; Swigart, Anna G; Tenison, Caitlin; Jolles, Dietsje D; Rosenberg-Lee, Miriam; Fuchs, Lynn; Menon, Vinod

2013-05-14

Now, more than ever, the ability to acquire mathematical skills efficiently is critical for academic and professional success, yet little is known about the behavioral and neural mechanisms that drive some children to acquire these skills faster than others. Here we investigate the behavioral and neural predictors of individual differences in arithmetic skill acquisition in response to 8-wk of one-to-one math tutoring. Twenty-four children in grade 3 (ages 8-9 y), a critical period for acquisition of basic mathematical skills, underwent structural and resting-state functional MRI scans pretutoring. A significant shift in arithmetic problem-solving strategies from counting to fact retrieval was observed with tutoring. Notably, the speed and accuracy of arithmetic problem solving increased with tutoring, with some children improving significantly more than others. Next, we examined whether pretutoring behavioral and brain measures could predict individual differences in arithmetic performance improvements with tutoring. No behavioral measures, including intelligence quotient, working memory, or mathematical abilities, predicted performance improvements. In contrast, pretutoring hippocampal volume predicted performance improvements. Furthermore, pretutoring intrinsic functional connectivity of the hippocampus with dorsolateral and ventrolateral prefrontal cortices and the basal ganglia also predicted performance improvements. Our findings provide evidence that individual differences in morphometry and connectivity of brain regions associated with learning and memory, and not regions typically involved in arithmetic processing, are strong predictors of responsiveness to math tutoring in children. More generally, our study suggests that quantitative measures of brain structure and intrinsic brain organization can provide a more sensitive marker of skill acquisition than behavioral measures.

The Effect of Ultrasonic Peening on Service Life of the Butt-Welded High-Temperature Steel Pipes

NASA Astrophysics Data System (ADS)

Daavari, Morteza; Vanini, Seyed Ali Sadough

2015-09-01

Residual stresses introduced by manufacturing processes such as casting, forming, machining, and welding have harmful effects on the mechanical behavior of the structures. In addition to the residual stresses, weld toe stress concentration can play a determining effect. There are several methods to improve the mechanical properties such as fatigue behavior of the welded structures. In this paper, the effects of ultrasonic peening on the fatigue life of the high-temperature seamless steel pipes, used in the petrochemical environment, have been investigated. These welded pipes are fatigued due to thermal and mechanical loads caused by the cycle of cooling, heating, and internal pressure fluctuations. Residual stress measurements, weld geometry estimation, electrochemical evaluations, and metallography investigations were done as supplementary examinations. Results showed that application of ultrasonic impact treatment has led to increased fatigue life, fatigue strength, and corrosion resistance of A106-B welded steel pipes in petrochemical corrosive environment.

Will working memory training generalize to improve off-task behavior in children with attention-deficit/hyperactivity disorder?

PubMed

Green, Chloe T; Long, Debra L; Green, David; Iosif, Ana-Maria; Dixon, J Faye; Miller, Meghan R; Fassbender, Catherine; Schweitzer, Julie B

2012-07-01

Computerized working memory and executive function training programs designed to target specific impairments in executive functioning are becoming increasingly available, yet how well these programs generalize to improve functional deficits in disorders, such as attention-deficit/hyperactivity disorder (ADHD), beyond the training context is not well-established. The aim of this study was to examine the extent to which working memory (WM) training in children with ADHD would diminish a core dysfunctional behavior associated with the disorder, "off-task" behavior during academic task performance. The effect of computerized WM training (adaptive) was compared to a placebo condition (nonadaptive) in a randomized, double-blind, placebo-controlled design in 26 children (18 males; age, 7 to 14 years old) diagnosed with ADHD. Participants completed the training in approximately 25 sessions. The Restricted Academic Situations Task (RAST) observational system was used to assess aspects of off-task behavior during the completion of an academic task. Traditional measures of ADHD symptoms (Conners' Parent Rating Scale) and WM ability (standardized WM tests) were also collected. WM training led to significant reductions in off-task ADHD-associated behavior on the RAST system and improvement on WM tests. There were no significant differences between groups in improvement on parent rating scales. Findings lend insight into the generalizability of the effects of WM training and the relation between deficits in WM and off-task behavioral components of ADHD. These preliminary data suggest WM training may provide a mechanism for indirectly altering academic performance in children with ADHD.

Methylphenidate Disrupts Social Play Behavior in Adolescent Rats

PubMed Central

Vanderschuren, Louk JMJ; Trezza, Viviana; Griffioen-Roose, Sanne; Schiepers, Olga JG; Van Leeuwen, Natascha; De Vries, Taco J; Schoffelmeer, Anton NM

2008-01-01

Methylphenidate is the first-choice treatment for attention-deficit/hyperactivity disorder (ADHD), but its mechanism of action is incompletely understood. The cognitive effects of methylphenidate have been extensively studied, but little is known about its effects on spontaneous social behavior. During adolescence, rats display a characteristic, highly vigorous form of social behavior, termed social play behavior, which is of critical importance for social and cognitive development. We investigated the neurobehavioral mechanisms by which methylphenidate affects social play behavior in rats. Methylphenidate (0.3-3.0 mg/kg, s.c. or p.o.) abolished social play behavior, without altering general social interest. This effect of methylphenidate did not depend upon the baseline level of social play and was not secondary to changes in locomotion. Furthermore, the play-suppressant effect of methylphenidate was not subject to tolerance or sensitization. Methylphenidate blocked both the initiation to play and the responsivity to play initiation. The effect of methylphenidate was mimicked by the noradrenaline reuptake inhibitor atomoxetine, which is also used for the treatment of ADHD, and was blocked by an α-2 adrenoceptor antagonist. In addition, combined administration of subeffective doses of methylphenidate and atomoxetine suppressed social play. However, blockade of α-1 adrenoceptors, β-adrenoceptors, or dopamine receptors did not alter the effect of methylphenidate. These data show that methylphenidate selectively blocks the most vigorous part of the behavioral repertoire of adolescent rats through a noradrenergic mechanism. We suggest that the effect of methylphenidate on social play is a reflection of its therapeutic effect in ADHD, that is, improved behavioral inhibition. However, given the importance of social play for development, these findings may also indicate an adverse side effect of methylphenidate. PMID:18305462

Methylphenidate disrupts social play behavior in adolescent rats.

PubMed

Vanderschuren, Louk J M J; Trezza, Viviana; Griffioen-Roose, Sanne; Schiepers, Olga J G; Van Leeuwen, Natascha; De Vries, Taco J; Schoffelmeer, Anton N M

2008-11-01

Methylphenidate is the first-choice treatment for attention-deficit/hyperactivity disorder (ADHD), but its mechanism of action is incompletely understood. The cognitive effects of methylphenidate have been extensively studied, but little is known about its effects on spontaneous social behavior. During adolescence, rats display a characteristic, highly vigorous form of social behavior, termed social play behavior, which is of critical importance for social and cognitive development. We investigated the neurobehavioral mechanisms by which methylphenidate affects social play behavior in rats. Methylphenidate (0.3-3.0 mg/kg, s.c. or p.o.) abolished social play behavior, without altering general social interest. This effect of methylphenidate did not depend upon the baseline level of social play and was not secondary to changes in locomotion. Furthermore, the play-suppressant effect of methylphenidate was not subject to tolerance or sensitization. Methylphenidate blocked both the initiation to play and the responsivity to play initiation. The effect of methylphenidate was mimicked by the noradrenaline reuptake inhibitor atomoxetine, which is also used for the treatment of ADHD, and was blocked by an alpha-2 adrenoceptor antagonist. In addition, combined administration of subeffective doses of methylphenidate and atomoxetine suppressed social play. However, blockade of alpha-1 adrenoceptors, beta-adrenoceptors, or dopamine receptors did not alter the effect of methylphenidate. These data show that methylphenidate selectively blocks the most vigorous part of the behavioral repertoire of adolescent rats through a noradrenergic mechanism. We suggest that the effect of methylphenidate on social play is a reflection of its therapeutic effect in ADHD, that is, improved behavioral inhibition. However, given the importance of social play for development, these findings may also indicate an adverse side effect of methylphenidate.

A suggestion to improve a day keeps your depletion away: Examining promotive and prohibitive voice behaviors within a regulatory focus and ego depletion framework.

PubMed

Lin, Szu-Han Joanna; Johnson, Russell E

2015-09-01

One way that employees contribute to organizational effectiveness is by expressing voice. They may offer suggestions for how to improve the organization (promotive voice behavior), or express concerns to prevent harmful events from occurring (prohibitive voice behavior). Although promotive and prohibitive voices are thought to be distinct types of behavior, very little is known about their unique antecedents and consequences. In this study we draw on regulatory focus and ego depletion theories to derive a theoretical model that outlines a dynamic process of the antecedents and consequences of voice behavior. Results from 2 multiwave field studies revealed that promotion and prevention foci have unique ties to promotive and prohibitive voice, respectively. Promotive and prohibitive voice, in turn, were associated with decreases and increases, respectively, in depletion. Consistent with the dynamic nature of self-control, depletion was associated with reductions in employees' subsequent voice behavior, regardless of the type of voice (promotive or prohibitive). Results were consistent across 2 studies and remained even after controlling for other established antecedents of voice and alternative mediating mechanisms beside depletion. (c) 2015 APA, all rights reserved).

Analysis of Particulate Composite Behavior Based on Nonlinear Elasticity and an Improved Mori-Tanaka Theory

DTIC Science & Technology

1998-09-01

to characterize the weakening constraint power of the matrix as opposed to earlier analyses that used an additional eigenstrain term. It also...matrix Poisson ratio was constant and the inclusions were rigid, he showed that the disturbed strain and the eigenstrain in the Eshelby method could...Eshelby, elastic properties, prediction, energy balance, mechanical behavior, eigenstrain , nonlinear dcd03e So7S&3 UNCLASSIFIED SECURITY CLASSIFICATION OF FORM (Highest classification of Title, Abstract, Keywords)

Premature ejaculation: do we have effective therapy?

PubMed

Serefoglu, Ege Can; Saitz, Theodore R; Trost, Landon; Hellstrom, Wayne J G

2013-03-01

Premature ejaculation (PE) is the most common sexual dysfunction, with the majority of PE patients remaining undiagnosed and undertreated. Despite its prevalence, there is a current paucity of data regarding available treatment options and mechanisms. The objective of the current investigation is to review and summarize pertinent literature on therapeutic options for the treatment of PE, including behavioral/psychologic, oral pharmacotherapy, and surgery. A pubmed search was conducted on articles reporting data on available treatment options for PE. Articles describing potential mechanisms of action were additionally included for review. Preference was given towards randomized, controlled trials, when available. PE remains an underdiagnosed and undertreated disease process, with limited data available regarding potential underlying mechanisms and long-term outcomes of treatment options. Psychological/behavioral therapies, including the stop-start, squeeze, and pelvic floor rehabilitation techniques have demonstrated improvements in short-term series, with decreased efficacy with additional follow-up. Topical therapies, which are commonly utilized result in prolonged intravaginal ejaculatory latency time (IELT) at the expense of potential penile/vaginal Hypothesia. Oral therapies similarly demonstrate improved IELTs with variable side effect profiles and include selective serotonin reuptake inhibitors (daily or on demand), phosphodiesterase-5 inhibitors, alpha-1 adrenergic antagonists, and tramadol. Alternative therapies such as acupuncture have shown benefits in limited studies. Surgery is not commonly performed and is not recommended by available guidelines. PE is a common condition, with limited data available regarding its underlying pathophysiology and treatment. Available therapies include topical, oral, behavioral/psychologic modification, or a combination thereof. Additional research is required to assess the optimal treatment strategies and algorithms as well as to better define the mechanisms for PE and its management.

Premature ejaculation: do we have effective therapy?

PubMed Central

Serefoglu, Ege Can; Saitz, Theodore R.; Trost, Landon

2013-01-01

Introduction Premature ejaculation (PE) is the most common sexual dysfunction, with the majority of PE patients remaining undiagnosed and undertreated. Despite its prevalence, there is a current paucity of data regarding available treatment options and mechanisms. The objective of the current investigation is to review and summarize pertinent literature on therapeutic options for the treatment of PE, including behavioral/psychologic, oral pharmacotherapy, and surgery. Methods A pubmed search was conducted on articles reporting data on available treatment options for PE. Articles describing potential mechanisms of action were additionally included for review. Preference was given towards randomized, controlled trials, when available. Results PE remains an underdiagnosed and undertreated disease process, with limited data available regarding potential underlying mechanisms and long-term outcomes of treatment options. Psychological/behavioral therapies, including the stop-start, squeeze, and pelvic floor rehabilitation techniques have demonstrated improvements in short-term series, with decreased efficacy with additional follow-up. Topical therapies, which are commonly utilized result in prolonged intravaginal ejaculatory latency time (IELT) at the expense of potential penile/vaginal Hypothesia. Oral therapies similarly demonstrate improved IELTs with variable side effect profiles and include selective serotonin reuptake inhibitors (daily or on demand), phosphodiesterase-5 inhibitors, alpha-1 adrenergic antagonists, and tramadol. Alternative therapies such as acupuncture have shown benefits in limited studies. Surgery is not commonly performed and is not recommended by available guidelines. Conclusions PE is a common condition, with limited data available regarding its underlying pathophysiology and treatment. Available therapies include topical, oral, behavioral/psychologic modification, or a combination thereof. Additional research is required to assess the optimal treatment strategies and algorithms as well as to better define the mechanisms for PE and its management. PMID:26816723

The promise of multimedia technology for STI/HIV prevention: frameworks for understanding improved facilitator delivery and participant learning.

PubMed

Khan, Maria R; Epperson, Matthew W; Gilbert, Louisa; Goddard, Dawn; Hunt, Timothy; Sarfo, Bright; El-Bassel, Nabila

2012-10-01

There is increasing excitement about multimedia sexually transmitted infection (STI) and HIV prevention interventions, yet there has been limited discussion of how use of multimedia technology may improve STI/HIV prevention efforts. The purpose of this paper is to describe the mechanisms through which multimedia technology may work to improve the delivery and uptake of intervention material. We present conceptual frameworks describing how multimedia technology may improve intervention delivery by increasing standardization and fidelity to the intervention material and the participant's ability to learn by improving attention, cognition, emotional engagement, skills-building, and uptake of sensitive material about sexual and drug risks. In addition, we describe how the non-multimedia behavioral STI/HIV prevention intervention, Project WORTH, was adapted into a multimedia format for women involved in the criminal justice system and provide examples of how multimedia activities can more effectively target key mediators of behavioral change in this intervention.

The Promise of Multimedia Technology for STI/HIV Prevention: Frameworks for Understanding Improved Facilitator Delivery and Participant Learning

PubMed Central

Epperson, Matthew W.; Gilbert, Louisa; Goddard, Dawn; Hunt, Timothy; Sarfo, Bright; El-Bassel, Nabila

2018-01-01

There is increasing excitement about multi-media sexually transmitted infection (STI) and HIV prevention interventions, yet there has been limited discussion of how use of multimedia technology may improve STI/HIV prevention efforts. The purpose of this paper is to describe the mechanisms through which multimedia technology may work to improve the delivery and uptake of intervention material. We present conceptual frameworks describing how multimedia technology may improve intervention delivery by increasing standardization and fidelity to the intervention material and the participant’s ability to learn by improving attention, cognition, emotional engagement, skills-building, and uptake of sensitive material about sexual and drug risks. In addition, we describe how the non-multimedia behavioral STI/HIV prevention intervention, Project WORTH, was adapted into a multimedia format for women involved in the criminal justice system and provide examples of how multimedia activities can more effectively target key mediators of behavioral change in this intervention. PMID:22223296

Infectious Disease and Imperfections of Self-Image.

PubMed

Ackerman, Joshua M; Tybur, Joshua M; Mortensen, Chad R

2018-02-01

Infectious disease is an ever-present threat in daily life. Recent literature indicates that people manage this threat with a suite of antipathogenic psychological and behavioral defense mechanisms, which motivate the avoidance of people and objects bearing cues to pathogen risk. Here, we demonstrate that self-image is also impacted by these mechanisms. In seven studies, pathogen cues led individuals chronically averse to germs to express greater concern about their own physical appearance. Correspondingly, these people exhibited behavioral intentions and decisions intended to conceal or improve their appearance, such as purchasing facial products, taking pharmaceuticals, and undergoing cosmetic surgery. This work opens a new area of investigation for infectious-disease psychology research and highlights the central role played by physical appearance in pathogen-related cognition.

Effect of Heat Index on Microstructure and Mechanical Behavior of Friction Stir Processed AZ31

NASA Astrophysics Data System (ADS)

Yuan, Wei; Mishra, Rajiv S.

Friction stir processing modifies the micro structure and properties of metals through intense plastic deformation. The frictional heat input affects the microstructure evolution and resulting mechanical properties. 2 mm thick commercial AZ31B-H24 Mg alloy was friction stir processed under various process parameter combinations to investigate the effect of heat index on micro structure and properties. Recrystallized grain structure in the nugget region was observed for all processing conditions with decrease in hardness. Results indicate a reduced tensile yield strength and ultimate tensile strength compared to the as-received material in H-temper, but with an improved hardening capacity. The strain hardening behavior of friction stir processed material is discussed.

Prestress Strengthens the Shell of Norwalk Virus Nanoparticles

PubMed Central

Baclayon, Marian; Shoemaker, Glen K.; Uetrecht, Charlotte; Crawford, Sue E.; Estes, Mary K.; Prasad, B. V. Venkataram; Heck, Albert J. R.; Wuite, Gijs J. L.; Roos, Wouter H.

2014-01-01

We investigated the influence of the protruding domain of Norwalk virus-like particles (NVLP) on its overall structural and mechanical stability. Deletion of the protruding domain yields smooth mutant particles and our AFM nanoindentation measurements show a surprisingly altered indentation response of these particles. Notably, the brittle behavior of the NVLP as compared to the plastic behavior of the mutant reveals that the protruding domain drastically changes the capsid’s material properties. We conclude that the protruding domain introduces prestress, thereby increasing the stiffness of the NVLP and effectively stabilizing the viral nanoparticles. Our results exemplify the variety of methods that nature has explored to improve the mechanical properties of viral capsids, which in turn provides new insights for developing rationally designed, self-assembled nanodevices. PMID:21967663

Dynamical aspects of behavior generation under constraints

PubMed Central

Harter, Derek; Achunala, Srinivas

2007-01-01

Dynamic adaptation is a key feature of brains helping to maintain the quality of their performance in the face of increasingly difficult constraints. How to achieve high-quality performance under demanding real-time conditions is an important question in the study of cognitive behaviors. Animals and humans are embedded in and constrained by their environments. Our goal is to improve the understanding of the dynamics of the interacting brain–environment system by studying human behaviors when completing constrained tasks and by modeling the observed behavior. In this article we present results of experiments with humans performing tasks on the computer under variable time and resource constraints. We compare various models of behavior generation in order to describe the observed human performance. Finally we speculate on mechanisms how chaotic neurodynamics can contribute to the generation of flexible human behaviors under constraints. PMID:19003514

An investigation of the microstructure, mechanical properties, and tribological performance of ultra high molecular weight polyethylene for applications in total joint arthroplasty

NASA Astrophysics Data System (ADS)

van Citters, Douglas W.

Ultra high molecular weight polyethylene (UHMWPE) is the most common bearing material in joint arthroplasty due to its biocompatibility, its wear resistance, and its mechanical toughness. Despite the favorable properties of UHMWPE and its success as a biomaterial, billions of dollars are spent annually to revise tens of thousands of failed artificial joints. Over half of these revision procedures are related to mechanical failure of the polymer bearing or osteolysis resulting from polymer wear. Contemporary material processing steps involving thermal treatment and/or radiation treatment seek to improve outcomes through improving the tribological properties of UHMWPE. However, it is widely recognized that achieving wear resistance through radiation-induced crosslinking comes at the cost of reduced mechanical properties. Moreover, current wear theories for orthopaedic UHMWPE are incomplete in that they predict zero wear in the absence of crossing motion. Wear nonetheless occurs in linear reciprocation, necessitating an alternate theory. The present work explains the effects of thermal treatments and radiation treatments on the properties of GUR1050 UHMWPE. A test matrix allows comparisons of different treatments across different test platforms. Characterization techniques include DSC, FTIR spectroscopy, tensile testing, x-ray diffraction, and electron microscopy. A novel quantitative stereology technique is developed to quantify crystallite size in the semicrystalline material. Seven clinically relevant materials are subjected to rolling-sliding tribotesting to determine polyethylene wear behavior in linear reciprocation. The multi-station tribotester employed for this work enables high throughput testing, and the specimen geometry allows direct measurement of wear rates without a gravimetric soak control. The results of the material characterization tests can be used to accurately predict the rolling-sliding wear behavior of UHMWPE. Wear rate is directly related to crystallite size divided by the material yield strength. A modification of the delamination theory of wear is proposed to explain the wear mechanism. The results and conclusions of the present study can be used to specify future UHMWPE treatments that might eliminate a toughness-reducing radiation dose while improving the wear properties of the polymer. Such treatments would improve the in vivo performance of UHMWPE and hence would improve orthopaedic surgery outcomes.

Mechanics of Granular Materials (MGM)

NASA Technical Reports Server (NTRS)

Alshibli, Khalid A.; Costes, Nicholas C.; Porter, Ronald F.

1996-01-01

The constitutive behavior of uncemented granular materials such as strength, stiffness, and localization of deformations are to a large extend derived from interparticle friction transmitted between solid particles and particle groups. Interparticle forces are highly dependent on gravitational body forces. At very low effective confining pressures, the true nature of the Mohr envelope, which defines the Mohr-Coulomb failure criterion for soils, as well as the relative contribution of each of non-frictional components to soil's shear strength cannot be evaluated in terrestrial laboratories. Because of the impossibility of eliminating gravitational body forces on earth, the weight of soil grains develops interparticle compressive stresses which mask true soil constitutive behavior even in the smallest samples of models. Therefore the microgravity environment induced by near-earth orbits of spacecraft provides unique experimental opportunities for testing theories related to the mechanical behavior of terrestrial granular materials. Such materials may include cohesionless soils, industrial powders, crushed coal, etc. This paper will describe the microgravity experiment, 'Mechanics of Granular Materials (MGM)', scheduled to be flown on Space Shuttle-MIR missions. The paper will describe the experiment's hardware, instrumentation, specimen preparation procedures, testing procedures in flight, as well as a brief summary of the post-mission analysis. It is expected that the experimental results will significantly improve the understanding of the behavior of granular materials under very low effective stress levels.

Evaluating psychosocial and behavioral mechanisms of change in a tailored communication intervention.

PubMed

Elder, John P; Ayala, Guadalupe X; Slymen, Donald J; Arredondo, Elva M; Campbell, Nadia R

2009-04-01

This study examined the impact of a tailored nutrition intervention at 3 and 6 months postintervention. In all, 357 Latinas were randomly assigned to one of three conditions: (1) a control condition comprised of previously developed Spanish language targeted materials, (2) tailored print materials, or (3) tailored print materials accompanied by personalized dietary counseling via lay heath advisors (promotoras). At 6 months postintervention, significant group by time interactions were observed on the dietary behavioral strategies scales. The promotora condition resulted in significant behavior change initially; however, receipt of tailored and control materials was instrumental in continued behavior change after intervention activities had ceased. Group main effects suggested that the promotora condition was superior at reducing barriers and improving family interactions supporting healthy behaviors. The promotora model is an effective method for changing important dietary behaviors and psychosocial determinants, but longer term behavior change is achievable with less expensive intervention methods.

Darwin as a student of behavior.

PubMed

Thierry, Bernard

2010-02-01

In The Expression of the Emotions, Charles Darwin documents evolutionary continuity between animals and humans, emphasizing the universality of expressions in man. Most of the book addresses human behavior, and its influence on the study of animal behavior has been weak. The issue of natural selection is remarkably absent from this book, which relies on the inheritance of acquired characters rather than on a genuine Darwinian logic. Yet Konrad Lorenz considered Darwin to be a forerunner of behavioral biology. The reason was to be found in The Descent of Man and chapter VIII of The Origin of Species, where Darwin provides an explanation of behavior through selection, stating that the same mechanisms explaining morphological changes also account for gradual improvements in instincts. He assessed the accuracy of his evolutionary theory by directly studying animal behavior, hence laying the foundations of behavioral research for the next century. 2009 Académie des sciences. Published by Elsevier SAS. All rights reserved.

Behavioral Phenotyping of Murine Disease Models with the Integrated Behavioral Station (INBEST).

PubMed

Sakic, Boris; Cooper, Marcella P A; Taylor, Sarah E; Stojanovic, Milica; Zagorac, Bosa; Kapadia, Minesh

2015-04-23

Due to rapid advances in genetic engineering, small rodents have become the preferred subjects in many disciplines of biomedical research. In studies of chronic CNS disorders, there is an increasing demand for murine models with high validity at the behavioral level. However, multiple pathogenic mechanisms and complex functional deficits often impose challenges to reliably measure and interpret behavior of chronically sick mice. Therefore, the assessment of peripheral pathology and a behavioral profile at several time points using a battery of tests are required. Video-tracking, behavioral spectroscopy, and remote acquisition of physiological measures are emerging technologies that allow for comprehensive, accurate, and unbiased behavioral analysis in a home-base-like setting. This report describes a refined phenotyping protocol, which includes a custom-made monitoring apparatus (Integrated Behavioral Station, INBEST) that focuses on prolonged measurements of basic functional outputs, such as spontaneous activity, food/water intake and motivated behavior in a relatively stress-free environment. Technical and conceptual improvements in INBEST design may further promote reproducibility and standardization of behavioral studies.

The impact of state behavioral health reform on Native American individuals, families, and communities.

PubMed

Willging, Cathleen E; Goodkind, Jessica; Lamphere, Louise; Saul, Gwendolyn; Fluder, Shannon; Seanez, Paula

2012-07-01

In 2005, the State of New Mexico undertook a sweeping transformation of all publicly funded behavioral health services. The reform was intended to enhance the cultural responsiveness and appropriateness of these services. To examine achievement of this objective, we conducted a qualitative study of the involvement of Native Americans in reform efforts and the subsequent impacts of reform on services for Native Americans. We found that the reform was relatively unsuccessful at creating mechanisms for genuine community input or improving behavioral health care for this population. These shortcomings were related to limited understandings of administrators concerning how tribal governments and health care systems operate, and the structural limitations of a managed care system that does not allow flexibility for culturally appropriate utilization review, screening, or treatment. However, interaction between the State and tribes increased, and we conclude that aspects of the reform could be strengthened to achieve more meaningful involvement and service improvements.

The influence of combined cognitive plus social-cognitive training on amygdala response during face emotion recognition in schizophrenia.

PubMed

Hooker, Christine I; Bruce, Lori; Fisher, Melissa; Verosky, Sara C; Miyakawa, Asako; D'Esposito, Mark; Vinogradov, Sophia

2013-08-30

Both cognitive and social-cognitive deficits impact functional outcome in schizophrenia. Cognitive remediation studies indicate that targeted cognitive and/or social-cognitive training improves behavioral performance on trained skills. However, the neural effects of training in schizophrenia and their relation to behavioral gains are largely unknown. This study tested whether a 50-h intervention which included both cognitive and social-cognitive training would influence neural mechanisms that support social ccognition. Schizophrenia participants completed a computer-based intervention of either auditory-based cognitive training (AT) plus social-cognition training (SCT) (N=11) or non-specific computer games (CG) (N=11). Assessments included a functional magnetic resonance imaging (fMRI) task of facial emotion recognition, and behavioral measures of cognition, social cognition, and functional outcome. The fMRI results showed the predicted group-by-time interaction. Results were strongest for emotion recognition of happy, surprise and fear: relative to CG participants, AT+SCT participants showed a neural activity increase in bilateral amygdala, right putamen and right medial prefrontal cortex. Across all participants, pre-to-post intervention neural activity increase in these regions predicted behavioral improvement on an independent emotion perception measure (MSCEIT: Perceiving Emotions). Among AT+SCT participants alone, neural activity increase in right amygdala predicted behavioral improvement in emotion perception. The findings indicate that combined cognition and social-cognition training improves neural systems that support social-cognition skills. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

Effects of altruism and burnout on driving behavior of bus drivers.

PubMed

Shi, Xia; Zhang, Liang

2017-05-01

Personality traits predict driving behaviors. However, the mechanism underlying this relationship has not been adequately investigated in professional drivers. The current study investigated the relationship between altruistic personality and aberrant driving behaviors, and the potential role of burnout. A total of 194 bus drivers completed questionnaires including measures of altruism, burnout and aberrant driving behaviors (aggressive violations, ordinary violations, errors, and lapses). The results showed that altruism was negatively correlated with burnout, and with all the four subcategories of aberrant driving behavior. Burnout fully mediated the relationship between altruism and aggressive violations, and partially mediated the relationship between altruism and lapses. These findings can be applied in the bus drivers' selection and interventions for burnout in order to improve the safety of public transport. Copyright © 2017 Elsevier Ltd. All rights reserved.

Effect of crystallographic orientation on structural and mechanical behaviors of Ni-Ti thin films irradiated by Ag7+ ions

NASA Astrophysics Data System (ADS)

Kumar, Veeresh; Singhal, Rahul

2018-04-01

In the present study, thin films of Ni-Ti shape memory alloy have been grown on Si substrate by dc magnetron co-sputtering technique using separate sputter targets Ni and Ti. The prepared thin films have been irradiated by 100 MeV Ag7+ ions at three different fluences, which are 1 × 1012, 5 × 1012, and 1 × 1013 ions/cm2. The elemental composition and depth profile of pristine film have been investigated by Rutherford backscattering spectrometry. The changes in crystal orientation, surface morphology, and mechanical properties of Ni-Ti thin films before and after irradiation have been studied by X-ray diffraction, atomic force microscopy, field-emission scanning electron microscopy, and nanoindentation techniques, respectively. X-ray diffraction measurement has revealed the existence of both austenite and martensite phases in pristine film and the formation of precipitate on the surface of the film after irradiation at an optimized fluence of 1 × 1013 ions/cm2. Nanoindentation measurement has revealed improvement in mechanical properties of Ni-Ti thin films after ion irradiation via increasing hardness and Young modulus due to the formation of precipitate and ductile phase. The improvement in mechanical behavior could be explained in terms of precipitation hardening and structural change of Ni-Ti thin film after irradiation by Swift heavy ion irradiation.

Mechanism of Change in Cognitive Behavioral Therapy for Body Image and Self-Care on ART Adherence Among Sexual Minority Men Living with HIV.

PubMed

Lamb, Kalina M; Nogg, Kelsey A; Safren, Steven A; Blashill, Aaron J

2018-05-11

Body image disturbance is a common problem reported among sexual minority men living with HIV, and is associated with poor antiretroviral therapy (ART) adherence. Recently, a novel integrated intervention (cognitive behavioral therapy for body image and self-care; CBT-BISC) was developed and pilot tested to simultaneously improve body image and ART adherence in this population. Although CBT-BISC has demonstrated preliminary efficacy in improving ART adherence, the mechanisms of change are unknown. Utilizing data from a two-armed randomized controlled trial (N = 44 sexual minority men living with HIV), comparing CBT-BISC to an enhanced treatment as usual (ETAU) condition, sequential process mediation via latent difference scores was assessed, with changes in body image disturbance entered as the mechanism between treatment condition and changes in ART adherence. Participants assigned to CBT-BISC reported statistically significant reductions in body image disturbance post-intervention, which subsequently predicted changes in ART adherence from post-intervention to long term follow-up (b = 20.01, SE = 9.11, t = 2.19, p = 0.028). One pathway in which CBT-BISC positively impacts ART adherence is through reductions in body image disturbance. Body image disturbance represents one, of likely several, mechanism that prospectively predicts ART adherence among sexual minority men living with HIV.

Feeding Patterns and Emotional Care in Breastfed Infants

ERIC Educational Resources Information Center

Smith, Julie P.; Ellwood, Mark

2011-01-01

A number of studies have suggested breastfed infants have improved bonding and attachment or cognitive development outcomes. However, mechanisms by which these differences might develop are poorly understood. We used maternal time use data to examine whether exclusively breastfeeding mothers spend more time in close interactive behaviors with…

Neural and Behavioral Mechanisms of Clear Speech

ERIC Educational Resources Information Center

Luque, Jenna Silver

2017-01-01

Clear speech is a speaking style that has been shown to improve intelligibility in adverse listening conditions, for various listener and talker populations. Clear-speech phonetic enhancements include a slowed speech rate, expanded vowel space, and expanded pitch range. Although clear-speech phonetic enhancements have been demonstrated across a…

Consolidation and fabrication techniques for vanadium-20 w/o titanium /TV-20/

NASA Technical Reports Server (NTRS)

Burt, W. R.; Karasek, F. J.; Kramer, W. C.; Mayfield, R. M.; Mc Gowan, R. D.

1968-01-01

Tests of the mechanical properties, fuel compatibility, sodium corrosion and irradiation behavior were made for vanadium and vanadium alloy. Improved methods for consolidation and fabrication of bar, rod, sheet, and high-quality, small diameter, thin-wall tubing of vanadium-20 without titanium are reported.

Mechanical behavior of single-layer ceramized zirconia abutments for dental implant prosthetic rehabilitation

PubMed Central

Jiménez-Melendo, Manuel; Llena-Blasco, Oriol; Bruguera, August; Llena-Blasco, Jaime; Yáñez-Vico, Rosa-María; García-Calderón, Manuel; Vaquero-Aguilar, Cristina; Velázquez-Cayón, Rocío; Gutiérrez-Pérez, José-Luis

2014-01-01

Objectives: This study was undertaken to characterize the mechanical response of bare (as-received) and single-layer ceramized zirconia abutments with both internal and external connections that have been developed to enhanced aesthetic restorations. Material and Methods: Sixteen zirconia implant abutments (ZiReal Post®, Biomet 3i, USA) with internal and external connections have been analyzed. Half of the specimens were coated with a 0.5mm-thick layer of a low-fusing fluroapatite ceramic. Mechanical tests were carried out under static (constant cross-head speed of 1mm/min until fracture) and dynamic (between 100 and 400N at a frequency of 1Hz) loading conditions. The failure location was identified by electron microscopy. The removal torque of the retaining screws after testing was also evaluated. Results: The average fracture strength was above 300N for all the abutments, regardless of connection geometry and coating. In most of the cases (94%), failure occurred by abutment fracture. No significant differences were observed either in fatigue behavior and removal torque between the different abutment groups. Conclusions: Mechanical behavior of Zireal zirconia abutments is independent of the type of internal/external connection and the presence/absence of ceramic coating. This may be clinically valuable in dental rehabilitation to improve the aesthetic outcome of zirconia-based dental implant systems. Key words:Dental implant, zirconia, ceramic structure, mechanical properties. PMID:25674313

Bioprosthetic heart valve heterograft biomaterials: structure, mechanical behavior and computational simulation.

PubMed

Sacks, Michael S; Mirnajafi, Ali; Sun, Wei; Schmidt, Paul

2006-11-01

The present review surveys significant developments in the biomechanical characterization and computational simulation of biologically derived chemically cross-linked soft tissues, or 'heterograft' biomaterials, used in replacement bioprosthetic heart valve (BHV). A survey of mechanical characterization techniques, relevant mechanical properties and computational simulation approaches is presented for both the source tissues and cross-linked biomaterials. Since durability remains the critical problem with current bioprostheses, changes with the mechanical behavior with fatigue are also presented. Moreover, given the complex nature of the mechanical properties of heterograft biomaterials it is not surprising that most constitutive (stress-strain) models, historically used to characterize their behavior, were oversimplified. Simulations of BHV function utilizing these models have inevitably been inaccurate. Thus, more recent finite element simulations utilizing nonlinear constitutive models, which achieve greater model fidelity, are reviewed. An important conclusion of this review is the need for accurate constitutive models, rigorously validated with appropriate experimental data, in order that the design benefits of computational models can be realized. Finally, for at least the coming 20 years, BHVs fabricated from heterograft biomaterials will continue to be extensively used, and will probably remain as the dominant valve design. We should thus recognize that rational, scientifically based approaches to BHV biomaterial development and design can lead to significantly improved BHV, over the coming decades, which can potentially impact millions of patients worldwide with heart valve disease.

Improved Friction and Wear of M50 Steel Composites Incorporated with ZnO as a Solid Lubricant with Different Concentrations Under Different Loads

NASA Astrophysics Data System (ADS)

Essa, F. A.; Zhang, Qiaoxin; Huang, Xingjiu; Ibrahim, Ahmed Mohamed Mahmoud; Ali, Mohamed Kamal Ahmed; Abdelkareem, Mohamed A. A.; Elagouz, Ahmed

2017-10-01

This experimental study explores improving the tribological behavior of M50 steel using ZnO as a solid lubricant with different concentrations of 5, 10, 15, 20, and 25 wt.%. Tribological tests were conducted using pin-on-disk tribometer under different loads of 3, 6, 9, and 12 N and constant sliding speed of 0.2 m s-1 in air. XRD, EPMA, FESEM, EDS mapping, and XPS tests were performed to understand the major mechanisms leading to improve the tribological and mechanical properties of M50 composites. Results showed that the best tribological and mechanical properties were obtained at 20.0 wt.% of ZnO. Friction coefficient and wear rate were reduced by 52.909 and 70%, respectively, due to the formation of tribo-films on the worn surfaces. Furthermore, the hardness of M50 composites increased by 27.86%. Our study provides results with suggestions to overcome the challenges facing the technology when using M50 matrix composites in mechanical applications.

Proinflammatory cytokines correlate with early exercise attenuating anxiety-like behavior after cerebral ischemia.

PubMed

Zhang, Qi; Zhang, Jingjun; Yan, Yuzhong; Zhang, Pengyue; Zhang, Wei; Xia, Rong

2017-11-01

Stroke may cause neuropsychiatric problems, which have negative effects on cognitive functions and behavior. Exercise plays an important role in reducing the occurrence and development of stroke, the concrete mechanism is not fully clarified. In this study, we attempted to determine whether early treadmill exercise attenuates anxiety-like behavior by regulation of inflammation after brain ischemia. We subjected adult male rats to middle cerebral artery occlusion (MCAO) for 90 min and trained rats started to run on a treadmill from postoperative day 1 to day 14. The effects of treadmill on cognitive functions, anxiety-like behavior, and immune activation were analyzed by Morris water maze test, open field test, elevated plus maze test, and enzyme-linked immunosorbent assay. Early treadmill exercise significantly improved cognitive function, alleviated anxiety-like behavior in ischemic rats model; this improvement was associated with significantly decreased activation of astrocytes and microglia cells and proinflammatory markers (platelet-activating factor [PAF], interleukin-6 [IL-6], tumor necrosis factor-alpha [TNF-α], intercellular adhesion molecule-1 [ICAM-1], and vascular cell adhesion molecule-1 [VCAM-1]). Our results indicated that early treadmill exercise attenuated anxiety-like behavior by decreasing inflammation response, exercise conferred a great benefit of attenuating anxiety-like behavior via anti-inflammatory treatment may prove to be a novel neuroprotective strategy for stroke.

Smartphone users: Understanding how security mechanisms are perceived and new persuasive methods

PubMed Central

Alsaleh, Mansour; Alomar, Noura; Alarifi, Abdulrahman

2017-01-01

Protecting smartphones against security threats is a multidimensional problem involving human and technological factors. This study investigates how smartphone users’ security- and privacy-related decisions are influenced by their attitudes, perceptions, and understanding of various security threats. In this work, we seek to provide quantified insights into smartphone users’ behavior toward multiple key security features including locking mechanisms, application repositories, mobile instant messaging, and smartphone location services. To the best of our knowledge, this is the first study that reveals often unforeseen correlations and dependencies between various privacy- and security-related behaviors. Our work also provides evidence that making correct security decisions might not necessarily correlate with individuals’ awareness of the consequences of security threats. By comparing participants’ behavior and their motives for adopting or ignoring certain security practices, we suggest implementing additional persuasive approaches that focus on addressing social and technological aspects of the problem. On the basis of our findings and the results presented in the literature, we identify the factors that might influence smartphone users’ security behaviors. We then use our understanding of what might drive and influence significant behavioral changes to propose several platform design modifications that we believe could improve the security levels of smartphones. PMID:28297719

Smartphone users: Understanding how security mechanisms are perceived and new persuasive methods.

PubMed

Alsaleh, Mansour; Alomar, Noura; Alarifi, Abdulrahman

2017-01-01

Protecting smartphones against security threats is a multidimensional problem involving human and technological factors. This study investigates how smartphone users' security- and privacy-related decisions are influenced by their attitudes, perceptions, and understanding of various security threats. In this work, we seek to provide quantified insights into smartphone users' behavior toward multiple key security features including locking mechanisms, application repositories, mobile instant messaging, and smartphone location services. To the best of our knowledge, this is the first study that reveals often unforeseen correlations and dependencies between various privacy- and security-related behaviors. Our work also provides evidence that making correct security decisions might not necessarily correlate with individuals' awareness of the consequences of security threats. By comparing participants' behavior and their motives for adopting or ignoring certain security practices, we suggest implementing additional persuasive approaches that focus on addressing social and technological aspects of the problem. On the basis of our findings and the results presented in the literature, we identify the factors that might influence smartphone users' security behaviors. We then use our understanding of what might drive and influence significant behavioral changes to propose several platform design modifications that we believe could improve the security levels of smartphones.

A general computation model based on inverse analysis principle used for rheological analysis of W/O rapeseed and soybean oil emulsions

NASA Astrophysics Data System (ADS)

Vintila, Iuliana; Gavrus, Adinel

2017-10-01

The present research paper proposes the validation of a rigorous computation model used as a numerical tool to identify rheological behavior of complex emulsions W/O. Considering a three-dimensional description of a general viscoplastic flow it is detailed the thermo-mechanical equations used to identify fluid or soft material's rheological laws starting from global experimental measurements. Analyses are conducted for complex emulsions W/O having generally a Bingham behavior using the shear stress - strain rate dependency based on a power law and using an improved analytical model. Experimental results are investigated in case of rheological behavior for crude and refined rapeseed/soybean oils and four types of corresponding W/O emulsions using different physical-chemical composition. The rheological behavior model was correlated with the thermo-mechanical analysis of a plane-plane rheometer, oil content, chemical composition, particle size and emulsifier's concentration. The parameters of rheological laws describing the industrial oils and the W/O concentrated emulsions behavior were computed from estimated shear stresses using a non-linear regression technique and from experimental torques using the inverse analysis tool designed by A. Gavrus (1992-2000).

Identification of urinary metabolites that correlate with clinical improvements in children with autism treated with sulforaphane from broccoli.

PubMed

Bent, Stephen; Lawton, Brittany; Warren, Tracy; Widjaja, Felicia; Dang, Katherine; Fahey, Jed W; Cornblatt, Brian; Kinchen, Jason M; Delucchi, Kevin; Hendren, Robert L

2018-01-01

Children with autism spectrum disorder (ASD) have urinary metabolites suggesting impairments in several pathways, including oxidative stress, inflammation, mitochondrial dysfunction, and gut microbiome alterations. Sulforaphane, a supplement with indirect antioxidant effects that are derived from broccoli sprouts and seeds, was recently shown to lead to improvements in behavior and social responsiveness in children with ASD. We conducted the current open-label study to determine if we could identify changes in urinary metabolites that were associated with clinical improvements with the goal of identifying a potential mechanism of action. Children and young adults enrolled in a school for children with ASD and related neurodevelopmental disorders were recruited to participate in a 12-week, open-label study of sulforaphane. Fasting urinary metabolites and measures of behavior (Aberrant Behavior Checklist-ABC) and social responsiveness (Social Responsiveness Scale-SRS) were measured at baseline and at the end of the study. Pearson's correlation coefficient was calculated for the pre- to post-intervention change in each of the two clinical scales (ABS and SRS) versus the change in each metabolite. Fifteen children completed the 12-week study. Mean scores on both symptom measures showed improvements (decreases) over the study period, but only the change in the SRS was significant. The ABC improved - 7.1 points (95% CI - 17.4 to 3.2), and the SRS improved - 9.7 points (95% CI - 18.7 to - 0.8). We identified 77 urinary metabolites that were correlated with changes in symptoms, and they clustered into pathways of oxidative stress, amino acid/gut microbiome, neurotransmitters, hormones, and sphingomyelin metabolism. Urinary metabolomics analysis is a useful tool to identify pathways that may be involved in the mechanism of action of treatments targeting abnormal physiology in ASD. This study was prospectively registered at clinicaltrials.gov (NCT02654743) on January 11, 2016.

The SENSE Study: Treatment Mechanisms of a Cognitive Behavioral and Mindfulness-Based Group Sleep Improvement Intervention for At-Risk Adolescents.

PubMed

Blake, Matthew; Schwartz, Orli; Waloszek, Joanna M; Raniti, Monika; Simmons, Julian G; Murray, Greg; Blake, Laura; Dahl, Ronald E; Bootzin, Richard; McMakin, Dana L; Dudgeon, Paul; Trinder, John; Allen, Nicholas B

2017-06-01

The aim of this study was to test whether a cognitive behavioral and mindfulness-based group sleep intervention would improve sleep and anxiety on school nights in a sample of at-risk adolescents. We also examined whether benefits to sleep and anxiety would be mediated by improvements in sleep hygiene awareness and presleep hyperarousal. Secondary analysis of a randomized controlled trial conducted with 123 adolescent participants (female = 60%; mean age = 14.48) who had high levels of sleep problems and anxiety symptoms. Participants were randomized into a sleep improvement intervention (n = 63) or active control "study skills" intervention (n = 60). Preintervention and postintervention, participants completed the Pittsburgh Sleep Quality Index (PSQI), Spence Children's Anxiety Scale (SCAS), Sleep Beliefs Scale (SBS), and Presleep Hyperarousal Scale (PSAS) and wore an actiwatch and completed a sleep diary for five school nights. The sleep intervention condition was associated with significantly greater improvements in actigraphy-measured sleep onset latency (SOLobj), sleep diary measured sleep efficiency (SEsubj), PSQI, SCAS, SBS, and PSAS, with medium to large effect sizes. Improvements in the PSQI and SCAS were specifically mediated by the measured improvements in the PSAS that resulted from the intervention. Improvements in SOLobj and SEsubj were not specifically related to improvements in any of the putative treatment mechanisms. This study provides evidence that presleep arousal but not sleep hygiene awareness is important for adolescents' perceived sleep quality and could be a target for new treatments of adolescent sleep problems. © Sleep Research Society 2017. Published by Oxford University Press on behalf of the Sleep Research Society. All rights reserved. For permissions, please e-mail journals.permissions@oup.com.

Caenorhabditis elegans as a Model to Study the Molecular and Genetic Mechanisms of Drug Addiction

PubMed Central

Engleman, Eric A.; Katner, Simon N.; Neal-Beliveau, Bethany S.

2016-01-01

Drug addiction takes a massive toll on society. Novel animal models are needed to test new treatments and understand the basic mechanisms underlying addiction. Rodent models have identified the neurocircuitry involved in addictive behavior and indicate that rodents possess some of the same neurobiologic mechanisms that mediate addiction in humans. Recent studies indicate that addiction is mechanistically and phylogenetically ancient and many mechanisms that underlie human addiction are also present in invertebrates. The nematode Caenorhabditis elegans has conserved neurobiologic systems with powerful molecular and genetic tools and a rapid rate of development that enables cost-effective translational discovery. Emerging evidence suggests that C. elegans is an excellent model to identify molecular mechanisms that mediate drug-induced behavior and potential targets for medications development for various addictive compounds. C. elegans emit many behaviors that can be easily quantitated including some that involve interactions with the environment. Ethanol (EtOH) is the best-studied drug-of-abuse in C. elegans and at least 50 different genes/targets have been identified as mediating EtOH’s effects and polymorphisms in some orthologs in humans are associated with alcohol use disorders. C. elegans has also been shown to display dopamine and cholinergic system–dependent attraction to nicotine and demonstrate preference for cues previously associated with nicotine. Cocaine and methamphetamine have been found to produce dopamine-dependent reward-like behaviors in C. elegans. These behavioral tests in combination with genetic/molecular manipulations have led to the identification of dozens of target genes/systems in C. elegans that mediate drug effects. The one target/gene identified as essential for drug-induced behavioral responses across all drugs of abuse was the cat-2 gene coding for tyrosine hydroxylase, which is consistent with the role of dopamine neurotransmission in human addiction. Overall, C. elegans can be used to model aspects of drug addiction and identify systems and molecular mechanisms that mediate drug effects. The findings are surprisingly consistent with analogous findings in higher-level organisms. Further, model refinement is warranted to improve model validity and increase utility for medications development. PMID:26810004

Caenorhabditis elegans as a Model to Study the Molecular and Genetic Mechanisms of Drug Addiction.

PubMed

Engleman, Eric A; Katner, Simon N; Neal-Beliveau, Bethany S

2016-01-01

Drug addiction takes a massive toll on society. Novel animal models are needed to test new treatments and understand the basic mechanisms underlying addiction. Rodent models have identified the neurocircuitry involved in addictive behavior and indicate that rodents possess some of the same neurobiologic mechanisms that mediate addiction in humans. Recent studies indicate that addiction is mechanistically and phylogenetically ancient and many mechanisms that underlie human addiction are also present in invertebrates. The nematode Caenorhabditis elegans has conserved neurobiologic systems with powerful molecular and genetic tools and a rapid rate of development that enables cost-effective translational discovery. Emerging evidence suggests that C. elegans is an excellent model to identify molecular mechanisms that mediate drug-induced behavior and potential targets for medications development for various addictive compounds. C. elegans emit many behaviors that can be easily quantitated including some that involve interactions with the environment. Ethanol (EtOH) is the best-studied drug-of-abuse in C. elegans and at least 50 different genes/targets have been identified as mediating EtOH's effects and polymorphisms in some orthologs in humans are associated with alcohol use disorders. C. elegans has also been shown to display dopamine and cholinergic system-dependent attraction to nicotine and demonstrate preference for cues previously associated with nicotine. Cocaine and methamphetamine have been found to produce dopamine-dependent reward-like behaviors in C. elegans. These behavioral tests in combination with genetic/molecular manipulations have led to the identification of dozens of target genes/systems in C. elegans that mediate drug effects. The one target/gene identified as essential for drug-induced behavioral responses across all drugs of abuse was the cat-2 gene coding for tyrosine hydroxylase, which is consistent with the role of dopamine neurotransmission in human addiction. Overall, C. elegans can be used to model aspects of drug addiction and identify systems and molecular mechanisms that mediate drug effects. The findings are surprisingly consistent with analogous findings in higher-level organisms. Further, model refinement is warranted to improve model validity and increase utility for medications development. Copyright © 2016. Published by Elsevier Inc.

Mechanical and physical behavior of newly developed functionally graded materials and composites of stainless steel 316L with calcium silicate and hydroxyapatite.

PubMed

Ataollahi Oshkour, Azim; Pramanik, Sumit; Mehrali, Mehdi; Yau, Yat Huang; Tarlochan, Faris; Abu Osman, Noor Azuan

2015-09-01

This study aimed to investigate the structural, physical and mechanical behavior of composites and functionally graded materials (FGMs) made of stainless steel (SS-316L)/hydroxyapatite (HA) and SS-316L/calcium silicate (CS) employing powder metallurgical solid state sintering. The structural analysis using X-ray diffraction showed that the sintering at high temperature led to the reaction between compounds of the SS-316L and HA, while SS-316L and CS remained intact during the sintering process in composites of SS-316L/CS. A dimensional expansion was found in the composites made of 40 and 50 wt% HA. The minimum shrinkage was emerged in 50 wt% CS composite, while the maximum shrinkage was revealed in samples with pure SS-316L, HA and CS. Compressive mechanical properties of SS-316L/HA decreased sharply with increasing of HA content up to 20 wt% and gradually with CS content up to 50 wt% for SS-316L/CS composites. The mechanical properties of the FGM of SS-316L/HA dropped with increase in temperature, while it was improved for the FGM of SS-316L/CS with temperature enhancement. It has been found that the FGMs emerged a better compressive mechanical properties compared to both the composite systems. Therefore, the SS-316L/CS composites and their FGMs have superior compressive mechanical properties to the SS-316L/HA composites and their FGMs and also the newly developed FGMs of SS-316L/CS with improved mechanical and enhanced gradation in physical and structural properties can potentially be utilized in the components with load-bearing application. Copyright © 2015 Elsevier Ltd. All rights reserved.

Effect of Copper and Zirconium Addition on Properties of Fe-Co-Si-B-Nb Bulk Metallic Glasses

NASA Astrophysics Data System (ADS)

Ikram, Haris; Khalid, Fazal Ahmad; Akmal, Muhammad; Abbas, Zameer

2017-07-01

In this research work, iron-based bulk metallic glasses (BMGs) have been fabricated, characterized and compared with Fe-Si alloy. BMG alloys of composition ((Fe0.6Co0.4)0.75B0.20Si0.05)96Nb4) were synthesized by suction casting technique using chilled copper die. Effect of copper and zirconium addition on magnetic, mechanical, thermal and electrochemical behavior of ((Fe0.6Co0.4)0.75B0.20Si0.05)96Nb4 BMGs was investigated. Furthermore, effect of annealing on nano-crystallization and subsequently on magnetic and mechanical behavior was also analyzed. Amorphousness of structure was evidenced by XRD analysis and microscopic visualization, whereas nano-crystallization behavior was identified by peak broadening of XRD patterns. Magnetic properties, measured by vibrating sample magnetometer, were found to be improved for as-cast BMG alloys by copper addition and further enhanced by nano-crystallization after annealing. Mechanical properties were observed to be increased by zirconium addition while slightly declined by copper addition. Potentiodynamic polarization analysis manifested the positive role of zirconium in enhancing corrosion resistance of BMGs in acidic, basic and brine mediums. Moreover, mechanical properties and corrosion analysis results affirmed the superiority of BMG alloys over Fe-Si alloy.

Building a Conceptual Framework to Study the Effect of HIV Stigma-Reduction Intervention Strategies on HIV Test Uptake: A Scoping Review.

PubMed

Thapa, Subash; Hannes, Karin; Cargo, Margaret; Buve, Anne; Aro, Arja R; Mathei, Catharina

A scoping review of grey and peer-reviewed literature was conducted to develop a conceptual framework to illustrate mechanisms involved in reducing HIV stigma and increasing HIV test uptake. We followed a three-step approach to exploring the literature: developing concepts, organizing and categorizing concepts, and synthesizing concepts into a framework. The framework contains four types of intervention strategies: awareness creation, influencing normative behavior, providing support, and developing regulatory laws. The awareness creation strategy generally improves knowledge and the influencing normative behavior strategy changes stigmatizing attitudes and behaviors, and subsequently, increases HIV test uptake. Providing support and development of regulatory law strategies changes actual stigmatizing behaviors of the people, and subsequently, increases HIV test uptake. The framework further outlines that the mechanisms described are influenced by the interaction of various social-contextual and individual factors. The framework sheds new light on the effects of HIV stigma-reduction intervention strategies and HIV test uptake. Copyright © 2017 Association of Nurses in AIDS Care. Published by Elsevier Inc. All rights reserved.

Understanding the heavy-tailed dynamics in human behavior

NASA Astrophysics Data System (ADS)

Ross, Gordon J.; Jones, Tim

2015-06-01

The recent availability of electronic data sets containing large volumes of communication data has made it possible to study human behavior on a larger scale than ever before. From this, it has been discovered that across a diverse range of data sets, the interevent times between consecutive communication events obey heavy-tailed power law dynamics. Explaining this has proved controversial, and two distinct hypotheses have emerged. The first holds that these power laws are fundamental, and arise from the mechanisms such as priority queuing that humans use to schedule tasks. The second holds that they are statistical artifacts which only occur in aggregated data when features such as circadian rhythms and burstiness are ignored. We use a large social media data set to test these hypotheses, and find that although models that incorporate circadian rhythms and burstiness do explain part of the observed heavy tails, there is residual unexplained heavy-tail behavior which suggests a more fundamental cause. Based on this, we develop a quantitative model of human behavior which improves on existing approaches and gives insight into the mechanisms underlying human interactions.

Translational behavioral medicine for population and individual health: gaps, opportunities, and vision for practice-based translational behavior change research.

PubMed

Ma, Jun; Lewis, Megan A; Smyth, Joshua M

2018-04-12

In this commentary, we propose a vision for "practice-based translational behavior change research," which we define as clinical and public health practice-embedded research on the implementation, optimization, and fundamental mechanisms of behavioral interventions. This vision intends to be inclusive of important research elements for behavioral intervention development, testing, and implementation. We discuss important research gaps and conceptual and methodological advances in three key areas along the discovery (development) to delivery (implementation) continuum of evidence-based interventions to improve behavior and health that could help achieve our vision of practice-based translational behavior change research. We expect our proposed vision to be refined and evolve over time. Through highlighting critical gaps that can be addressed by integrating modern theoretical and methodological approaches across disciplines in behavioral medicine, we hope to inspire the development and funding of innovative research on more potent and implementable behavior change interventions for optimal population and individual health.

Improved probabilistic inference as a general learning mechanism with action video games.

PubMed

Green, C Shawn; Pouget, Alexandre; Bavelier, Daphne

2010-09-14

Action video game play benefits performance in an array of sensory, perceptual, and attentional tasks that go well beyond the specifics of game play [1-9]. That a training regimen may induce improvements in so many different skills is notable because the majority of studies on training-induced learning report improvements on the trained task but limited transfer to other, even closely related, tasks ([10], but see also [11-13]). Here we ask whether improved probabilistic inference may explain such broad transfer. By using a visual perceptual decision making task [14, 15], the present study shows for the first time that action video game experience does indeed improve probabilistic inference. A neural model of this task [16] establishes how changing a single parameter, namely the strength of the connections between the neural layer providing the momentary evidence and the layer integrating the evidence over time, captures improvements in action-gamers behavior. These results were established in a visual, but also in a novel auditory, task, indicating generalization across modalities. Thus, improved probabilistic inference provides a general mechanism for why action video game playing enhances performance in a wide variety of tasks. In addition, this mechanism may serve as a signature of training regimens that are likely to produce transfer of learning. Copyright © 2010 Elsevier Ltd. All rights reserved.

Improvement in visual search with practice: mapping learning-related changes in neurocognitive stages of processing.

PubMed

Clark, Kait; Appelbaum, L Gregory; van den Berg, Berry; Mitroff, Stephen R; Woldorff, Marty G

2015-04-01

Practice can improve performance on visual search tasks; the neural mechanisms underlying such improvements, however, are not clear. Response time typically shortens with practice, but which components of the stimulus-response processing chain facilitate this behavioral change? Improved search performance could result from enhancements in various cognitive processing stages, including (1) sensory processing, (2) attentional allocation, (3) target discrimination, (4) motor-response preparation, and/or (5) response execution. We measured event-related potentials (ERPs) as human participants completed a five-day visual-search protocol in which they reported the orientation of a color popout target within an array of ellipses. We assessed changes in behavioral performance and in ERP components associated with various stages of processing. After practice, response time decreased in all participants (while accuracy remained consistent), and electrophysiological measures revealed modulation of several ERP components. First, amplitudes of the early sensory-evoked N1 component at 150 ms increased bilaterally, indicating enhanced visual sensory processing of the array. Second, the negative-polarity posterior-contralateral component (N2pc, 170-250 ms) was earlier and larger, demonstrating enhanced attentional orienting. Third, the amplitude of the sustained posterior contralateral negativity component (SPCN, 300-400 ms) decreased, indicating facilitated target discrimination. Finally, faster motor-response preparation and execution were observed after practice, as indicated by latency changes in both the stimulus-locked and response-locked lateralized readiness potentials (LRPs). These electrophysiological results delineate the functional plasticity in key mechanisms underlying visual search with high temporal resolution and illustrate how practice influences various cognitive and neural processing stages leading to enhanced behavioral performance. Copyright © 2015 the authors 0270-6474/15/355351-09$15.00/0.

Cocaine improves inhibitory control in a human model of response conflict.

PubMed

Fillmore, Mark T; Rush, Craig R; Hays, Lon

2005-11-01

The present study was designed to test the acute effects of cocaine on behavioral control in the presence and absence of motivational conflict. Adults (N = 14) with a history of stimulant use received oral cocaine hydrogen chloride (0, 100, 200, and 300 mg) and performed a cue-dependent go/no-go task to measure inhibitory and activational mechanisms of behavioral control either with or without motivated conflict between the inhibition and the activation of responses. Cocaine improved response inhibition in both conflict conditions, as evident by a decrease in inhibitory failures following active doses. The current study provides a useful model to investigate the effects of other drugs reported to have performance-enhancing effects. Copyright 2005 APA, all rights reserved.

China's Insurance Regulatory Reform, Corporate Governance Behavior and Insurers' Governance Effectiveness.

PubMed

Li, Huicong; Zhang, Hongliang; Tsai, Sang-Bing; Qiu, Aichao

2017-10-17

External regulation is an important mechanism to improve corporate behavior in emerging markets. China's insurance governance regulation, which began to supervise and guide insurance corporate governance behavior in 2006, has experienced a complex process of reform. This study tested our hypotheses with a sample of 85 firms during 2010-2011, which was obtained by providing a questionnaire to all of China's shareholding insurance companies. The empirical study results generally show that China's insurance governance effectiveness has significantly improved through strict regulation. Insurance corporate governance can improve business acumen and risk-control ability, but no significant evidence was found to prove its influence on profitability, as a result of focusing less attention on governance than on management. State ownership is associated with higher corporate governance effectiveness than non-state ownership. Listed companies tend to outperform non-listed firms, and life insurance corporate governance is more effective than that of property insurers. This study not only contributes to the comprehensive understanding of corporate governance effectiveness but also to the literature by highlighting the effect of corporate governance regulation in China's insurance industry and other emerging economies of the financial sector.

Effects of silicon on the oxidation, hot-corrosion, and mechanical behavior of two cast nickel-base superalloys

NASA Technical Reports Server (NTRS)

Miner, R. V., Jr.

1977-01-01

Cast specimens of nickel-base superalloys 713C and Mar-M200 with nominal additions of 0, 0.5, and 1 wt% Si were evaluated for oxidation and corrosion resistance, tensile and stress-rupture properties, microstructure, and phase relations. Results are compared with those of an earlier study of the effects of Si in B-1900. Si had similar effects on all three superalloys. It improves oxidation resistance but the improvement in 713C and Mar-M200 was considerably less than in B-1900. Hot-corrosion resistance is also improved somewhat. Si is, however, detrimental to mechanical properties, in particular, rupture strength and tensile ductility. Si has two obvious microstructural effects. It increases the amount of gamma-prime precipitated in eutectic nodules and promotes a Mo(Ni,Si)2 Laves phase in the alloys containing Mo. These microstructural effects do not appear responsible for the degradation of mechanical properties, however.

Effect of Copper Coated SiC Reinforcements on Microstructure, Mechanical Properties and Wear of Aluminium Composites

NASA Astrophysics Data System (ADS)

Kori, P. S.; Vanarotti, Mohan; Angadi, B. M.; Nagathan, V. V.; Auradi, V.; Sakri, M. I.

2017-08-01

Experimental investigations are carried out to study the influence of copper coated Silicon carbide (SiC) reinforcements in Aluminum (Al) based Al-SiC composites. Wear behavior and mechanical Properties like, ultimate tensile strength (UTS) and hardness are studied in the present work. Experimental results clearly revealed that, an addition of SiC particles (5, 10 and 15 Wt %) has lead in the improvement of hardness and ultimate tensile strength. Al-SiC composites containing the Copper coated SiC reinforcements showed better improvement in mechanical properties compared to uncoated ones. Characterization of Al-SiC composites are carried out using optical photomicrography and SEM analysis. Wear tests are carried out to study the effects of composition and normal pressure using Pin-On Disc wear testing machine. Results suggested that, wear rate decreases with increasing SiC composition, further an improvement in wear resistance is observed with copper coated SiC reinforcements in the Al-SiC metal matrix composites (MMC’s).

Changes in Health and Antiretroviral Adherence Among HIV-Infected Adults in Kenya: Qualitative Longitudinal Findings from a Livelihood Intervention.

PubMed

Weiser, Sheri D; Hatcher, Abigail M; Hufstedler, Lee L; Weke, Elly; Dworkin, Shari L; Bukusi, Elizabeth A; Burger, Rachel L; Kodish, Stephen; Grede, Nils; Butler, Lisa M; Cohen, Craig R

2017-02-01

This longitudinal qualitative study sought to understand how and why a livelihood intervention affected the health and health behaviors of HIV-infected Kenyan adults. The intervention included a microfinance loan, agricultural and financial training, and a human-powered water pump. In-depth interviews were conducted at two time points with intervention and control participants and program staff. We double coded interviews (n = 117) and used thematic content analysis of transcripts following an integrative inductive-deductive approach. Intervention participants described improvements in HIV health, including increased CD4 counts and energy, improved viral suppression, and fewer HIV-related symptoms. Better health was linked to improved clinic attendance and ART adherence through several mechanisms: (1) reductions in food insecurity and abject hunger; (2) improved financial stability; (3) improved productivity which enhanced social support; (4) better control over work situations; and, (5) renewed desire to prioritize their own health. Livelihood interventions may improve health by influencing upstream determinants of health behavior including food security and poverty.

Changes in Health and Antiretroviral Adherence Among HIV-Infected Adults in Kenya: Qualitative Longitudinal Findings from a Livelihood Intervention

PubMed Central

Hatcher, Abigail M.; Hufstedler, Lee L.; Weke, Elly; Dworkin, Shari L.; Bukusi, Elizabeth A.; Burger, Rachel L.; Kodish, Stephen; Grede, Nils; Butler, Lisa M.; Cohen, Craig R.

2018-01-01

This longitudinal qualitative study sought to understand how and why a livelihood intervention affected the health and health behaviors of HIV-infected Kenyan adults. The intervention included a microfinance loan, agricultural and financial training, and a human-powered water pump. In-depth interviews were conducted at two time points with intervention and control participants and program staff. We double coded interviews (n = 117) and used thematic content analysis of transcripts following an integrative inductive–deductive approach. Intervention participants described improvements in HIV health, including increased CD4 counts and energy, improved viral suppression, and fewer HIV-related symptoms. Better health was linked to improved clinic attendance and ART adherence through several mechanisms: (1) reductions in food insecurity and abject hunger; (2) improved financial stability; (3) improved productivity which enhanced social support; (4) better control over work situations; and, (5) renewed desire to prioritize their own health. Livelihood interventions may improve health by influencing upstream determinants of health behavior including food security and poverty. PMID:27637497

Neuronal Differentiation Modulated by Polymeric Membrane Properties.

PubMed

Morelli, Sabrina; Piscioneri, Antonella; Drioli, Enrico; De Bartolo, Loredana

2017-01-01

In this study, different collagen-blend membranes were successfully constructed by blending collagen with chitosan (CHT) or poly(lactic-co-glycolic acid) (PLGA) to enhance their properties and thus create new biofunctional materials with great potential use for neuronal tissue engineering and regeneration. Collagen blending strongly affected membrane properties in the following ways: (i) it improved the surface hydrophilicity of both pure CHT and PLGA membranes, (ii) it reduced the stiffness of CHT membranes, but (iii) it did not modify the good mechanical properties of PLGA membranes. Then, we investigated the effect of the different collagen concentrations on the neuronal behavior of the membranes developed. Morphological observations, immunocytochemistry, and morphometric measures demonstrated that the membranes developed, especially CHT/Col30, PLGA, and PLGA/Col1, provided suitable microenvironments for neuronal growth owing to their enhanced properties. The most consistent neuronal differentiation was obtained in neurons cultured on PLGA-based membranes, where a well-developed neuronal network was achieved due to their improved mechanical properties. Our findings suggest that tensile strength and elongation at break are key material parameters that have potential influence on both axonal elongation and neuronal structure and organization, which are of fundamental importance for the maintenance of efficient neuronal growth. Hence, our study has provided new insights regarding the effects of membrane mechanical properties on neuronal behavior, and thus it may help to design and improve novel instructive biomaterials for neuronal tissue engineering. © 2017 S. Karger AG, Basel.

Use of multiscale zirconium alloy deformation models in nuclear fuel behavior analysis

NASA Astrophysics Data System (ADS)

Montgomery, Robert; Tomé, Carlos; Liu, Wenfeng; Alankar, Alankar; Subramanian, Gopinath; Stanek, Christopher

2017-01-01

Accurate prediction of cladding mechanical behavior is a key aspect of modeling nuclear fuel behavior, especially for conditions of pellet-cladding interaction (PCI), reactivity-initiated accidents (RIA), and loss of coolant accidents (LOCA). Current approaches to fuel performance modeling rely on empirical constitutive models for cladding creep, growth and plastic deformation, which are limited to the materials and conditions for which the models were developed. To improve upon this approach, a microstructurally-based zirconium alloy mechanical deformation analysis capability is being developed within the United States Department of Energy Consortium for Advanced Simulation of Light Water Reactors (CASL). Specifically, the viscoplastic self-consistent (VPSC) polycrystal plasticity modeling approach, developed by Lebensohn and Tomé [1], has been coupled with the BISON engineering scale fuel performance code to represent the mechanistic material processes controlling the deformation behavior of light water reactor (LWR) cladding. A critical component of VPSC is the representation of the crystallographic nature (defect and dislocation movement) and orientation of the grains within the matrix material and the ability to account for the role of texture on deformation. A future goal is for VPSC to obtain information on reaction rate kinetics from atomistic calculations to inform the defect and dislocation behavior models described in VPSC. The multiscale modeling of cladding deformation mechanisms allowed by VPSC far exceed the functionality of typical semi-empirical constitutive models employed in nuclear fuel behavior codes to model irradiation growth and creep, thermal creep, or plasticity. This paper describes the implementation of an interface between VPSC and BISON and provides initial results utilizing the coupled functionality.

Advances and trends in computational structural mechanics

NASA Technical Reports Server (NTRS)

Noor, A. K.

1986-01-01

Recent developments in computational structural mechanics are reviewed with reference to computational needs for future structures technology, advances in computational models for material behavior, discrete element technology, assessment and control of numerical simulations of structural response, hybrid analysis, and techniques for large-scale optimization. Research areas in computational structural mechanics which have high potential for meeting future technological needs are identified. These include prediction and analysis of the failure of structural components made of new materials, development of computational strategies and solution methodologies for large-scale structural calculations, and assessment of reliability and adaptive improvement of response predictions.

Impaired Consciousness in Epilepsy

PubMed Central

Blumenfeld, Hal

2013-01-01

Consciousness is essential to normal human life. In epileptic seizures consciousness is often transiently lost making it impossible for the individual to experience or respond. This has huge consequences for safety, productivity, emotional health and quality of life. To prevent impaired consciousness in epilepsy it is necessary to understand the mechanisms leading to brain dysfunction during seizures. Normally the “consciousness system”—a specialized set of cortical-subcortical structures—maintains alertness, attention and awareness. Recent advances in neuroimaging, electrophysiology and prospective behavioral testing have shed new light on how epileptic seizures disrupt the consciousness system. Diverse seizure types including absence, generalized tonic-clonic and complex partial seizures converge on the same set of anatomical structures through different mechanisms to disrupt consciousness. Understanding these mechanisms may lead to improved treatment strategies to prevent impaired consciousness and improve quality of life in people with epilepsy. PMID:22898735

Animal behavioral assessments in current research of Parkinson's disease.

PubMed

Asakawa, Tetsuya; Fang, Huan; Sugiyama, Kenji; Nozaki, Takao; Hong, Zhen; Yang, Yilin; Hua, Fei; Ding, Guanghong; Chao, Dongman; Fenoy, Albert J; Villarreal, Sebastian J; Onoe, Hirotaka; Suzuki, Katsuaki; Mori, Norio; Namba, Hiroki; Xia, Ying

2016-06-01

Parkinson's disease (PD), a neurodegenerative disorder, is traditionally classified as a movement disorder. Patients typically suffer from many motor dysfunctions. Presently, clinicians and scientists recognize that many non-motor symptoms are associated with PD. There is an increasing interest in both motor and non-motor symptoms in clinical studies on PD patients and laboratory research on animal models that imitate the pathophysiologic features and symptoms of PD patients. Therefore, appropriate behavioral assessments are extremely crucial for correctly understanding the mechanisms of PD and accurately evaluating the efficacy and safety of novel therapies. This article systematically reviews the behavioral assessments, for both motor and non-motor symptoms, in various animal models involved in current PD research. We addressed the strengths and weaknesses of these behavioral tests and their appropriate applications. Moreover, we discussed potential mechanisms behind these behavioral tests and cautioned readers against potential experimental bias. Since most of the behavioral assessments currently used for non-motor symptoms are not particularly designed for animals with PD, it is of the utmost importance to greatly improve experimental design and evaluation in PD research with animal models. Indeed, it is essential to develop specific assessments for non-motor symptoms in PD animals based on their characteristics. We concluded with a prospective view for behavioral assessments with real-time assessment with mobile internet and wearable device in future PD research. Copyright © 2016 Elsevier Ltd. All rights reserved.

Experimental validation of 3D printed material behaviors and their influence on the structural topology design

NASA Astrophysics Data System (ADS)

Yang, Kai Ke; Zhu, Ji Hong; Wang, Chuang; Jia, Dong Sheng; Song, Long Long; Zhang, Wei Hong

2018-05-01

The purpose of this paper is to investigate the structures achieved by topology optimization and their fabrications by 3D printing considering the particular features of material microstructures and macro mechanical performances. Combining Digital Image Correlation and Optical Microscope, this paper experimentally explored the anisotropies of stiffness and strength existing in the 3D printed polymer material using Stereolithography (SLA) and titanium material using Selective Laser Melting (SLM). The standard specimens and typical structures obtained by topology optimization were fabricated along different building directions. On the one hand, the experimental results of these SLA produced structures showed stable properties and obviously anisotropic rules in stiffness, ultimate strengths and places of fractures. Further structural designs were performed using topology optimization when the particular mechanical behaviors of SLA printed materials were considered, which resulted in better structural performances compared to the optimized designs using `ideal' isotropic material model. On the other hand, this paper tested the mechanical behaviors of SLM printed multiscale lattice structures which were fabricated using the same metal powder and the same machine. The structural stiffness values are generally similar while the strength behaviors show a difference, which are mainly due to the irregular surface quality of the tiny structural branches of the lattice. The above evidences clearly show that the consideration of the particular behaviors of 3D printed materials is therefore indispensable for structural design and optimization in order to improve the structural performance and strengthen their practical significance.

Experimental validation of 3D printed material behaviors and their influence on the structural topology design

NASA Astrophysics Data System (ADS)

Yang, Kai Ke; Zhu, Ji Hong; Wang, Chuang; Jia, Dong Sheng; Song, Long Long; Zhang, Wei Hong

2018-02-01

The purpose of this paper is to investigate the structures achieved by topology optimization and their fabrications by 3D printing considering the particular features of material microstructures and macro mechanical performances. Combining Digital Image Correlation and Optical Microscope, this paper experimentally explored the anisotropies of stiffness and strength existing in the 3D printed polymer material using Stereolithography (SLA) and titanium material using Selective Laser Melting (SLM). The standard specimens and typical structures obtained by topology optimization were fabricated along different building directions. On the one hand, the experimental results of these SLA produced structures showed stable properties and obviously anisotropic rules in stiffness, ultimate strengths and places of fractures. Further structural designs were performed using topology optimization when the particular mechanical behaviors of SLA printed materials were considered, which resulted in better structural performances compared to the optimized designs using `ideal' isotropic material model. On the other hand, this paper tested the mechanical behaviors of SLM printed multiscale lattice structures which were fabricated using the same metal powder and the same machine. The structural stiffness values are generally similar while the strength behaviors show a difference, which are mainly due to the irregular surface quality of the tiny structural branches of the lattice. The above evidences clearly show that the consideration of the particular behaviors of 3D printed materials is therefore indispensable for structural design and optimization in order to improve the structural performance and strengthen their practical significance.

Electrochemical Behavior and Surface Chemistry of Nonequilibrium Aluminum Alloys: Passivity Mechanism and Fabrication Methods

DTIC Science & Technology

1994-01-17

alartl.rdentifvb bjock nurrber) FtELD GROUP SUB-GROUP Appreveo for LUDic release; OSirlOUtion unllmilTe. Reproduction in whole or in part is pemitted for any...INSPECTED 5 0eeesson For Mr.c EAi 0 Justi fioaL fo p ,l INTRODUCTION Aluminum alloys are generally designed for improved mechanical properties which...during spraying. The specifications for these samples are given in Table 1. In this report, W concentrations used to denote samples refer to design

Spine Conditions: Mechanical and Inflammatory Low Back Pain.

PubMed

Ledford, Christopher

2017-10-01

Mechanical low back pain (LBP) is an injury or derangement of an anatomic structure in the low back. When evaluating patients with LBP, clinicians should maintain clinical suspicion for vertebral fracture, cancer, and cauda equina syndrome. Management includes patient education focused on exercise, massage, and behavioral approaches such as cognitive behavioral therapy. Acupuncture can be an effective alternative and specific herbal supplements may provide short-term pain relief. The prognosis for patients with mechanical LBP is good. Inflammatory LBP is pain resulting from a systemic inflammatory condition, often referred to as axial spondyloarthritis. Ankylosing spondylitis is chronic inflammatory LBP characterized by early onset (mean age 24 years), with a higher prevalence in men. Five clinical parameters can help identify inflammatory LBP: improvement with exercise, pain at night, insidious onset, onset at younger than 40 years, and no improvement with rest. Management of inflammatory LBP typically includes nonsteroidal anti-inflammatory drugs and structured exercise programs, with emphasis on the involvement of a rheumatology subspecialist. Spondyloarthritis is associated with other rheumatic or autoimmune conditions, including rheumatoid arthritis, inflammatory bowel disease, and psoriasis. These should be considered when evaluating patients with inflammatory LBP. Written permission from the American Academy of Family Physicians is required for reproduction of this material in whole or in part in any form or medium.

Thermal, creep-recovery and viscoelastic behavior of high density polyethylene/hydroxyapatite nano particles for bone substitutes: effects of gamma radiation.

PubMed

Alothman, Othman Y; Fouad, H; Al-Zahrani, S M; Eshra, Ayman; Al Rez, Mohammed Fayez; Ansari, S G

2014-08-28

High Density Polyethylene (HDPE) is one of the most often used polymers in biomedical applications. The limitations of HDPE are its visco-elastic behavior, low modulus and poor bioactivity. To improve HDPE properties, HA nanoparticles can be added to form polymer composite that can be used as alternatives to metals for bone substitutes and orthopaedic implant applications. In our previous work (BioMedical Engineering OnLine 2013), different ratios of HDPE/HA nanocomposites were prepared using melt blending in a co-rotating intermeshing twin screw extruder. The accelerated aging effects on the tensile properties and torsional viscoelastic behavior (storage modulus (G') and Loss modulus (G")) at 80°C of irradiated and non-irradiated HDPE/HA was investigated. Also the thermal behavior of HDPE/HA were studied. In this study, the effects of gamma irradiation on the tensile viscoelastic behavior (storage modulus (E') and Loss modulus (E")) at 25°C examined for HDPE/HA nanocomposites at different frequencies using Dynamic Mechanical Analysis (DMA). The DMA was also used to analyze creep-recovery and relaxation properties of the nanocomposites. To analyze the thermal behavior of the HDPE/HA nanocomposite, Differential Scanning Calorimetry (DSC) was used. The microscopic examination of the cryogenically fractured surface revealed a reasonable distribution of HA nanoparticles in the HDPE matrix. The DMA showed that the tensile storage and loss modulus increases with increasing the HA nanoparticles ratio and the test frequency. The creep-recovery behavior improves with increasing the HA nanoparticle content. Finally, the results indicated that the crystallinity, viscoelastic, creep recovery and relaxation behavior of HDPE nanocomposite improved due to gamma irradiation. Based on the experimental results, it is found that prepared HDPE nanocomposite properties improved due to the addition of HA nanoparticles and irradiation. So, the prepared HDPE/HA nanocomposite appears to have fairly good comprehensive properties that make it a good candidate as bone substitute.

Surface free energy predominates in cell adhesion to hydroxyapatite through wettability.

PubMed

Nakamura, Miho; Hori, Naoko; Ando, Hiroshi; Namba, Saki; Toyama, Takeshi; Nishimiya, Nobuyuki; Yamashita, Kimihiro

2016-05-01

The initial adhesion of cells to biomaterials is critical in the regulation of subsequent cell behaviors. The purpose of this study was to investigate a mechanism through which the surface wettability of biomaterials can be improved and determine the effects of biomaterial surface characteristics on cellular behaviors. We investigated the surface characteristics of various types of hydroxyapatite after sintering in different atmospheres and examined the effects of various surface characteristics on cell adhesion to study cell-biomaterial interactions. Sintering atmosphere affects the polarization capacity of hydroxyapatite by changing hydroxide ion content and grain size. Compared with hydroxyapatite sintered in air, hydroxyapatite sintered in saturated water vapor had a higher polarization capacity that increased surface free energy and improved wettability, which in turn accelerated cell adhesion. We determined the optimal conditions of hydroxyapatite polarization for the improvement of surface wettability and acceleration of cell adhesion. Copyright © 2016 Elsevier B.V. All rights reserved.

Water-based adhesives with tailored hydrophobic association: dilution resistance and improved setting behavior.

PubMed

Dundua, Alexander; Landfester, Katharina; Taden, Andreas

2014-11-01

Hydrophobic association and stimuli-responsiveness is a powerful tool towards water-based adhesives with strongly improved properties, which is demonstrated based on the example of hydrophobically modified alkali-soluble latexes (HASE) with modulated association. Their rheological properties are highly tunable due to the hydrophobic domains that act as physical crosslinking sites of adjustable interaction strength. Ethanol, propanol, and butanol are used as water-soluble model additives with different hydrophobicity in order to specifically target the association sites and impact the viscoelastic properties and stimuli-responsiveness. The rheological and mechanical property response upon dilution with water can be tailored, and dilution-resistant or even dilution-thickening systems are obtained. The investigations are of high importance for water-based adhesives, as our findings provide insight into general structure-property relationships to improve their setting behavior, especially upon contact with wet substrates. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Inter-wall bridging induced peeling of multi-walled carbon nanotubes during tensile failure in aluminum matrix composites.

PubMed

Chen, Biao; Li, Shufeng; Imai, Hisashi; Umeda, Junko; Takahashi, Makoto; Kondoh, Katsuyoshi

2015-02-01

In situ scanning electron microscopy (SEM) observation of a tensile test was performed to investigate the fracturing behavior of multi-walled carbon nanotubes (MWCNTs) in powder metallurgy Al matrix composites. A multiple peeling phenomenon during MWCNT fracturing was clearly observed. Its formation mechanism and resultant effect on the composite strength were examined. Through transition electron microscopy characterizations, it was observed that defective structures like inter-wall bridges cross-linked adjacent walls of MWCNTs. This structure was helpful to improve the inter-wall bonding conditions, leading to the effective load transfer between walls and resultant peeling behaviors of MWCNTs. These results might provide new understandings of the fracturing mechanisms of carbon nanotube reinforcements for designing high-performance nanocomposites. Copyright © 2014 Elsevier Ltd. All rights reserved.

Heat Treatment of Closed-Cell A356 + 4 wt.%Cu + 2 wt.%Ca Foam and Its Effect on the Foam Mechanical Behavior

NASA Astrophysics Data System (ADS)

Mirbagheri, S. M. H.; Vali, H.; Soltani, H.

2017-01-01

In this investigation, aluminum-silicon alloy foam is developed by adding certain amounts of copper and calcium elements in A356 alloy. Addition of 4 wt.%Cu + 2 wt.%Ca to the melt changed bubbles morphology from ellipsoid to spherical by decreasing Reynolds number and increasing Bond number. Compression behavior and energy absorption of the foams are assessed before and after aging. Solid solution treatment and aging lead to the best mechanical properties with 170% enhancement in yield strength and 185% improvement in energy absorption capacity as compared to non-heat-treated foams. The metallographic observations showed that bubbles geometry and structure in the A356 + 4wt.% Cu + 2 wt.%Ca foam are more homogeneous than the A356 foam.

Living up to safety values in health care: the effect of leader behavioral integrity on occupational safety.

PubMed

Halbesleben, Jonathon R B; Leroy, Hannes; Dierynck, Bart; Simons, Tony; Savage, Grant T; McCaughey, Deirdre; Leon, Matthew R

2013-10-01

While previous research has identified that leaders' safety expectations and safety actions are important in fostering occupational safety, research has yet to demonstrate the importance of leader alignment between safety expectations and actions for improving occupational safety. We build on safety climate literature and theory on behavioral integrity to better understand the relationship between the leader's behavioral integrity regarding safety and work-related injuries. In a time-lagged study of 658 nurses, we find that behavioral integrity for high safety values is positively associated with greater reporting of fewer and less severe occupational injuries. The effects of behavioral integrity regarding safety can be better understood through the mediating mechanisms of safety compliance and psychological safety toward one's supervisor. We discuss the implications of our findings for future research on safety climate.

The Role of Objective Numeracy and Fluid Intelligence in Sex-Related Protective Behaviors.

PubMed

Dieckmann, Nathan F; Peters, Ellen; Leon, Juan; Benavides, Martin; Baker, David P; Norris, Alison

2015-01-01

A wealth of studies has indicated that greater cognitive ability is related to healthier behaviors and outcomes throughout the lifespan. In the present paper, we focus on objective numeracy (ability with numbers) and present findings from a study conducted in the Peruvian Highlands that examines the relations among formal education, numeracy, other more general cognitive skills, and a sex-related protective behavior (condom use). Our results show a potential unique protective effect of numeracy on this healthprotective behavior even after accounting for measures of fluid intelligence and potential confounding factors. These results add to a growing literature highlighting the robust protective effect on health behaviors of greater cognitive skills that are enhanced through schooling. Challenges for future research will be identifying the causal mechanisms that underlie these effects and translating this knowledge into effective interventions for improving health.

Influence of thermally activated processes on the deformation behavior during low temperature ECAP

NASA Astrophysics Data System (ADS)

Fritsch, S.; Scholze, M.; F-X Wagner, M.

2016-03-01

High strength aluminum alloys are generally hard to deform. Therefore, the application of conventional severe plastic deformation methods to generate ultrafine-grained microstructures and to further increase strength is considerably limited. In this study, we consider low temperature deformation in a custom-built, cooled equal channel angular pressing (ECAP) tool (internal angle 90°) as an alternative approach to severely plastically deform a 7075 aluminum alloy. To document the maximum improvement of mechanical properties, these alloys are initially deformed from a solid solution heat-treated condition. We characterize the mechanical behavior and the microstructure of the coarse grained initial material at different low temperatures, and we analyze how a tendency for the PLC effect and the strain-hardening rate affect the formability during subsequent severe plastic deformation at low temperatures. We then discuss how the deformation temperature and velocity influence the occurrence of PLC effects and the homogeneity of the deformed ECAP billets. Besides the mechanical properties and these microstructural changes, we discuss technologically relevant processing parameters (such as pressing forces) and practical limitations, as well as changes in fracture behavior of the low temperature deformed materials as a function of deformation temperature.

The maintenance of cooperation in multiplex networks with limited and partible resources of agents

NASA Astrophysics Data System (ADS)

Li, Zhaofeng; Shen, Bi; Jiang, Yichuan

2017-02-01

In this paper, we try to explain the maintenance of cooperation in multiplex networks with limited and partible resources of agents: defection brings larger short-term benefit and cooperative agents may become defective because of the unaffordable costs of cooperative behaviors that are performed in multiple layers simultaneously. Recent studies have identified the positive effects of multiple layers on evolutionary cooperation but generally overlook the maximum costs of agents in these synchronous games. By utilizing network effects and designing evolutionary mechanisms, cooperative behaviors become prevailing in public goods games, and agents can allocate personal resources across multiple layers. First, we generalize degree diversity into multiplex networks to improve the prospect for cooperation. Second, to prevent agents allocating all the resources into one layer, a greedy-first mechanism is proposed, in which agents prefer to add additional investments in the higher-payoff layer. It is found that greedy-first agents can perform cooperative behaviors in multiplex networks when one layer is scale-free network and degree differences between conjoint nodes increase. Our work may help to explain the emergence of cooperation in the absence of individual reputation and punishment mechanisms.

Heparin-mimetic polyurethane hydrogels with anticoagulant, tunable mechanical property and controllable drug releasing behavior.

PubMed

Chen, Yuan; Wang, Rui; Wang, Yonghui; Zhao, Weifeng; Sun, Shudong; Zhao, Changsheng

2017-05-01

In the present study, novel heparin-mimetic polyurethane hydrogels were prepared by introducing chemical crosslinked sulfated konjac glucomannan (SKGM). Scanning electron microscopy (SEM) results indicated that the introduction of SKGM and the increase of the molecular weight of diol segments could enlarge the pore sizes of the hydrogels. The swelling behavior corresponded with the SEM results, and the hydrogels could absorb more water after the modification. The modification also led to an improvement in the mechanical property. Meanwhile, the SKGM and the modified polyurethane hydrogels showed excellent hemocompatibility. The thromboplastin time of SKGM could reach up to 182.9s. Gentamycin sulfate (GS) was used as a model drug to be loaded into the hydrogels, and the loading amount was increased ca. 50% after the introduction of SKGM, thus resulting in high bactericidal efficiency. The results indicated that the introduction of SKGM and the alternation in the diol's molecular weight bestowed polyurethane hydrogels with promising properties of integrated blood-compatibility, mechanical properties and drug loading-releasing behavior. Therefore, the heparin-mimetic multifunctional polyurethane hydrogels have great potential to be used in biomedical applications. Copyright © 2017 Elsevier B.V. All rights reserved.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lin, J.S.; Miyamoto, Y.

The fracture behavior of graded Al{sub 2}O{sub 3}/TiC/Ni materials with a symmetric structure was investigated using single-edge notch-bend (SENB) specimens with surface compression. The fracture toughness of the graded materials was determined according to ASTM Standard E399. The results show that the effective fracture toughness increases with an increase in notch depth in the compressive stress zone, and reaches the maximum of 39.2 MPa m{sup 1/2} at the interface of compressive/tensile stress zones. Finite elements analysis reveals that the surface compression will be intensified at the notch root once the specimen is edge-notched because of the stress concentration, and themore » digress of the compressive stress intensification increases with an increase in notch depth. The dependence of the effective fracture toughness of the graded materials on the notch depth shows a behavior similar to the R-curve that is usually associated with microstructural toughening mechanisms. This toughening behavior is caused by the intensification of the compressive stress concentration with the increase of the notch depth. A theoretical analysis based on fracture mechanics verifies that the mechanical reliability of brittle ceramics can be improved effectively by tailoring and controlling the internal stresses.« less

Mechanisms of Aphasia Recovery after Stroke and the Role of Noninvasive Brain Stimulation

ERIC Educational Resources Information Center

Hamilton, Roy H.; Chrysikou, Evangelia G.; Coslett, Branch

2011-01-01

One of the most frequent symptoms of unilateral stroke is aphasia, the impairment or loss of language functions. Over the past few years, behavioral and neuroimaging studies have shown that rehabilitation interventions can promote neuroplastic changes in aphasic patients that may be associated with the improvement of language functions. Following…

The Effect of Microgravity on the Growth of Silica Nanostructures

NASA Technical Reports Server (NTRS)

Smith, D. D.; Sibille, L.; Cronise, R.; Oldenburg, S. J.; Wolfe, D.; Halas, N. J.

2001-01-01

The process of the formation of structures from coagulating ensembles is fundamentally important since the collective behavior of the constituents often results in dramatically improved or unusual mechanical, thermal, chemical, and optical properties. In this study we examine the effect of microgravity on the formation of silica structures, specifically particles and gels.

An investigation of the compressive strength of PRD-49-3/Epoxy composites

NASA Technical Reports Server (NTRS)

Kulkarni, S. V.; Rice, J. S.; Rosen, B. W.

1973-01-01

The development of unidirectional fiber composite materials is discussed. The mechanical and physical properties of the materials are described. Emphasis is placed in analyzing the compressive behavior of composite materials and developing methods for increasing compressive strength. The test program for evaluating the various procedures for improving compressive strength are reported.

A New Approach to Improve the Water Absorption Behavior of Flax Fibers Reinforced Soy-based Composites

USDA-ARS?s Scientific Manuscript database

Flax fibers are often used in reinforced composites which have exhibited numerous advantages such as high mechanical properties, low density and biodegradability. On the other hand, the hydrophilic nature of flax fiber is a major problem. In this study, we prepared the soybean oil based composites...

Improving Access to Health Care: School-Based Health Centers.

ERIC Educational Resources Information Center

Dowden, Shauna L.; Calvert, Richard D.; Davis, Lisa; Gullotta, Thomas P.

This article explores an approach for better serving the complete health care needs of children, specifically, the efficacy of school-based health centers (SBHCs) to provide a service delivery mechanism capable of functioning as a medical home for children, providing primary care for both their physical and behavioral health care needs. The…

Endurance Exercise as an “Endogenous” Neuro-enhancement Strategy to Facilitate Motor Learning

PubMed Central

Taubert, Marco; Villringer, Arno; Lehmann, Nico

2015-01-01

Endurance exercise improves cardiovascular and musculoskeletal function and may also increase the information processing capacities of the brain. Animal and human research from the past decade demonstrated widespread exercise effects on brain structure and function at the systems-, cellular-, and molecular level of brain organization. These neurobiological mechanisms may explain the well-established positive influence of exercise on performance in various behavioral domains but also its contribution to improved skill learning and neuroplasticity. With respect to the latter, only few empirical and theoretical studies are available to date. The aim of this review is (i) to summarize the existing neurobiological and behavioral evidence arguing for endurance exercise-induced improvements in motor learning and (ii) to develop hypotheses about the mechanistic link between exercise and improved learning. We identify major knowledge gaps that need to be addressed by future research projects to advance our understanding of how exercise should be organized to optimize motor learning. PMID:26834602

Performance of Poly(lactic acid) Surface Modified Films for Food Packaging Application

PubMed Central

Dalla Rosa, Marco; Iordanskii, Alexey L.

2017-01-01

Five Poly(lactic acid) (PLA) film samples were analyzed to study the gas barrier behavior, thermal stability and mechanical performance for food packaging application. O2, CO2, N2, N2O, and C2H4 pure gases; Air; and Modified Atmosphere (MA, 79% N2O/21% O2) were used to analyze the influence of the chemical structure, storage temperature and crystalline phase on the gas barrier behavior. The kinetic of the permeation process was investigated at different temperatures, ranging from 5 °C to 40 °C. Annealing thermal treatment on the samples led to the crystalline percentage, influencing especially the gas solubility process. Thermal properties such as Tg and χc, and mechanical properties such as tensile strength and modulus were remarkably improved with surface PLA modification. A more pronounced reinforcing effect was noted in the case of metallization, as well as improved gas barrier performance. Tensile testing and tensile cycling tests confirmed the rigidity of the films, with about a 20% loss of elasticity after 25 cycles loading. PMID:28773210

Effect of Hydroxyapatite on the Mechanical Properties and Corrosion Behavior of Mg-Zn-Y Alloy

PubMed Central

Chiu, Chun; Lu, Chih-Te; Chen, Shih-Hsun; Ou, Keng-Liang

2017-01-01

Mg-Zn-Y alloys with a long period stacking ordered (LPSO) phase are potential candidates for biodegradable implants; however, an unfavorable degradation rate has limited their applications. Hydroxyapatite (HA) has been shown to enhance the corrosion resistance of Mg alloys. In this study, Mg97Zn1Y2-0.5 wt% HA composite was synthesized and solution treated at 500 °C for 10 h. The corrosion behavior of the composite was studied by electrochemical and immersion tests, while the mechanical properties were investigated by a tensile test. Addition of HA particles improves the corrosion resistance of Mg97Zn1Y2 alloy without sacrificing tensile strength. The improved corrosion resistance is due to the formation of a compact Ca-P surface layer and a decrease of the volume fraction of the LPSO phase, both resulting from the addition of HA. After solution-treatment, the corrosion resistance of the composite decreases. This is due to the formation of a more extended LPSO phase, which weakens its role as a corrosion barrier in protecting the Mg matrix. PMID:28773216

Degradation behavior of Mg-based biomaterials containing different long-period stacking ordered phases

NASA Astrophysics Data System (ADS)

Peng, Qiuming; Guo, Jianxin; Fu, Hui; Cai, Xuecheng; Wang, Yanan; Liu, Baozhong; Xu, Zhigang

2014-01-01

Long-period stacking ordered (LPSO) phases play an essential role in the development of magnesium alloys because they have a direct effect on mechanical and corrosion properties of the alloys. The LPSO structures are mostly divided to 18R and 14H. However, to date there are no consistent opinions about their degradation properties although both of them can improve mechanical properties. Herein we have successfully obtained two LPSO phases separately in the same Mg-Dy-Zn system and comparatively investigated the effect of different LPSO phases on degradation behavior in 0.9 wt.% NaCl solution. Our results demonstrate that a fine metastable 14H-LPSO phase in grain interior is more effective to improve corrosion resistance due to the presence of a homogeneous oxidation film and rapid film remediation ability. The outstanding corrosion resistant Mg-Dy-Zn based alloys with a metastable 14H-LPSO phase, coupled with low toxicity of alloying elements, are highly desirable in the design of novel Mg-based biomaterials, opening up a new avenue in the area of bio-Mg.

Mechanical properties and corrosion behavior of Mg-Gd-Ca-Zr alloys for medical applications.

PubMed

Shi, Ling-Ling; Huang, Yuanding; Yang, Lei; Feyerabend, Frank; Mendis, Chamini; Willumeit, Regine; Ulrich Kainer, Karl; Hort, Norbert

2015-07-01

Magnesium alloys are promising candidates for biomedical applications. In this work, influences of composition and heat treatment on the microstructure, the mechanical properties and the corrosion behavior of Mg-Gd-Ca-Zr alloys as potential biomedical implant candidates were investigated. Mg5Gd phase was observed at the grain boundaries of Mg-10Gd-xCa-0.5Zr (x=0, 0.3, 1.2wt%) alloys. Increase in the Ca content led to the formation of additional Mg2Ca phase. The Ca additions increased both the compressive and the tensile yield strengths, but reduced the ductility and the corrosion resistance in cell culture medium. After solution heat treatment, the Mg5Gd particles dissolved in the Mg matrix. The compressive strength decreased, while the corrosion resistance improved in the solution treated alloys. After ageing at 200°C, metastable β' phase formed on prismatic planes and a new type of basal precipitates have been observed, which improved the compressive and tensile ultimate strength, but decreased the ductility. Copyright © 2015 Elsevier Ltd. All rights reserved.

Polypropylene/glass fiber hierarchical composites incorporating inorganic fullerene-like nanoparticles for advanced technological applications.

PubMed

Díez-Pascual, Ana M; Naffakh, Mohammed

2013-10-09

Novel isotactic polypropylene (iPP)/glass fiber (GF) laminates reinforced with inorganic fullerene-like tungsten disulfide (IF-WS2) nanoparticles as environmentally friendly fillers have been successfully fabricated by simple melt-blending and fiber impregnation in a hot-press without the addition of any compatibilizer. The influence of IF-WS2 concentration on the morphology, viscosity. and thermal and mechanical behavior of the hierarchical composites has been investigated. Results revealed an unprecedented 62 °C increase in the degradation temperature of iPP/GF upon addition of only 4.0 wt % IF-WS2. The coexistence of both micro- and nanoscale fillers resulted in synergistic effects on enhancing the stiffness, strength, crystallinity, thermal stability, glass transition (Tg) and heat distortion temperature (HDT) of the matrix. The approach used in this work is an efficient, versatile, scalable and economic strategy to improve the mechanical and thermal behavior of GF-reinforced thermoplastics with a view to extend their use in advanced technological applications. This new type of composite materials shows great potential to improve the efficiency and sustainability of many forms of transport.

Degradation behavior of Mg-based biomaterials containing different long-period stacking ordered phases

PubMed Central

Peng, Qiuming; Guo, Jianxin; Fu, Hui; Cai, Xuecheng; Wang, Yanan; Liu, Baozhong; Xu, Zhigang

2014-01-01

Long-period stacking ordered (LPSO) phases play an essential role in the development of magnesium alloys because they have a direct effect on mechanical and corrosion properties of the alloys. The LPSO structures are mostly divided to 18R and 14H. However, to date there are no consistent opinions about their degradation properties although both of them can improve mechanical properties. Herein we have successfully obtained two LPSO phases separately in the same Mg-Dy-Zn system and comparatively investigated the effect of different LPSO phases on degradation behavior in 0.9 wt.% NaCl solution. Our results demonstrate that a fine metastable 14H-LPSO phase in grain interior is more effective to improve corrosion resistance due to the presence of a homogeneous oxidation film and rapid film remediation ability. The outstanding corrosion resistant Mg-Dy-Zn based alloys with a metastable 14H-LPSO phase, coupled with low toxicity of alloying elements, are highly desirable in the design of novel Mg-based biomaterials, opening up a new avenue in the area of bio-Mg. PMID:24401851

Organelles – understanding noise and heterogeneity in cell biology at an intermediate scale

PubMed Central

Chang, Amy Y.

2017-01-01

ABSTRACT Many studies over the years have shown that non-genetic mechanisms for producing cell-to-cell variation can lead to highly variable behaviors across genetically identical populations of cells. Most work to date has focused on gene expression noise as the primary source of phenotypic heterogeneity, yet other sources may also contribute. In this Commentary, we explore organelle-level heterogeneity as a potential secondary source of cellular ‘noise’ that contributes to phenotypic heterogeneity. We explore mechanisms for generating organelle heterogeneity and present evidence of functional links between organelle morphology and cellular behavior. Given the many instances in which molecular-level heterogeneity has been linked to phenotypic heterogeneity, we posit that organelle heterogeneity may similarly contribute to overall phenotypic heterogeneity and underline the importance of studying organelle heterogeneity to develop a more comprehensive understanding of phenotypic heterogeneity. Finally, we conclude with a discussion of the medical challenges associated with phenotypic heterogeneity and outline how improved methods for characterizing and controlling this heterogeneity may lead to improved therapeutic strategies and outcomes for patients. PMID:28183729

Influence of Alloying Elements on the Mechanical Properties of PtAl2 from First-Principles Calculations

NASA Astrophysics Data System (ADS)

Pan, Yong; Shi, Chang-Shuai

2018-04-01

Although PtAl2 is a promising high-temperature alloy, the improvement of its strength is still a big challenge. To solve this problem, we apply first-principles calculations to study the influence of alloying elements on the structural stability, elastic properties and brittle-or-ductile behavior of PtAl2. The results show that alloying elements prefer to occupy the Al site in comparison to the Pt site. Importantly, the calculated bulk modulus of doped PtAl2 is much larger than that of the parent PtAl2 due to the formation of TM-Pt and TM-Al bonds. In addition, alloying elements effectively improve the ductility of PtAl2. Finally, our work can provide new information to improve the mechanical properties of Pt-Al high-temperature materials.

Model and Simulation of an SMA Enhanced Lip Seal

NASA Astrophysics Data System (ADS)

Qiao, Rui; Gao, Xiujie; Brinson, L. Catherine

2011-07-01

The feasibility of using SMA wires to improve the seal effectiveness has been studied experimentally and numerically. In this article, we present only the numerical study of simulating the thermo-mechanical behavior for an SMA enhanced lip seal, leaving the test setup and results in the experimental counterpart. A pseudo 3D SMA model, considering 1D SMA behavior in the major loading direction and elastic response in other directions, was used to capture the thermo-mechanical behavior of SMA wires. The model was then implemented into ABAQUS using the user-defined material subroutine to inherit most features of the commercial finite element package. Two-way shape memory effect was also considered since the SMA material exhibits strong two-way effects. An axisymmetric finite element model was constructed to simulate a seal mounting on a shaft and the sealing pressure was calculated for both the regular seal and the SMA enhanced seal. Finally, the result was qualitatively compared with the experimental observation.

Prior social experience affects the behavioral and neural responses to acute alcohol in juvenile crayfish.

PubMed

Swierzbinski, Matthew E; Lazarchik, Andrew R; Herberholz, Jens

2017-04-15

The effects of alcohol on society can be devastating, both as an immediate consequence of acute intoxication and as a powerful drug of abuse. However, the neurocellular mechanisms of alcohol intoxication are still elusive, partly because of the complex interactions between alcohol and nervous system function. We found that juvenile crayfish are behaviorally sensitive to acute alcohol exposure and progress through stages that are strikingly similar to those of most other intoxicated organisms. Most surprisingly, we found that the social history of the animals significantly modified the acute effects of alcohol. Crayfish taken from a rich social environment became intoxicated more rapidly than animals that were socially isolated before alcohol exposure. In addition, we found that the modulation of intoxicated behaviors by prior social experience was paralleled on the level of individual neurons. These results significantly improve our understanding of the mechanisms underlying the interplay between social experience, alcohol intoxication and nervous system function. © 2017. Published by The Company of Biologists Ltd.

Study on the Correlation Between Dynamical Behavior and Friction/Wear Mechanism Under the Effect of Grooves

NASA Astrophysics Data System (ADS)

Zhu, Z. Y.; Mo, J. L.; Wang, D. W.; Zhao, J.; Zhu, M. H.; Zhou, Z. R.

2018-04-01

In this work, the interfacial friction and wear and vibration characteristics are studied by sliding a chromium bearing steel ball (AISI 52100) over both multi-grooved and single-grooved forged steel disks (20CrMnMo) at low and high rotating speeds in order to reveal the effect mechanism of groove-textured surface on tribological behaviors. The results show that the grooves modify the contact state of the ball and the disk at the contact interface. This consequently causes variations in the normal displacement, normal force, and friction force signals. The changes in these three signals become more pronounced with increasing groove width at a low speed. The collision behavior between the ball and the groove increase the amplitude of vibration acceleration at a high speed. The test results suggest that grooves with appropriate widths could trap wear debris on the ball surface while avoiding a strong collision between the disk and the ball, resulting in an improvement in the wear states.

Imaging and Force Recognition of Single Molecular Behaviors Using Atomic Force Microscopy

PubMed Central

Li, Mi; Dang, Dan; Liu, Lianqing; Xi, Ning; Wang, Yuechao

2017-01-01

The advent of atomic force microscopy (AFM) has provided a powerful tool for investigating the behaviors of single native biological molecules under physiological conditions. AFM can not only image the conformational changes of single biological molecules at work with sub-nanometer resolution, but also sense the specific interactions of individual molecular pair with piconewton force sensitivity. In the past decade, the performance of AFM has been greatly improved, which makes it widely used in biology to address diverse biomedical issues. Characterizing the behaviors of single molecules by AFM provides considerable novel insights into the underlying mechanisms guiding life activities, contributing much to cell and molecular biology. In this article, we review the recent developments of AFM studies in single-molecule assay. The related techniques involved in AFM single-molecule assay were firstly presented, and then the progress in several aspects (including molecular imaging, molecular mechanics, molecular recognition, and molecular activities on cell surface) was summarized. The challenges and future directions were also discussed. PMID:28117741

Motivational "spill-over" during weight control: increased self-determination and exercise intrinsic motivation predict eating self-regulation.

PubMed

Mata, Jutta; Silva, Marlene N; Vieira, Paulo N; Carraça, Eliana V; Andrade, Ana M; Coutinho, Sílvia R; Sardinha, Luis B; Teixeira, Pedro J

2009-11-01

Successful weight management relies on at least two health behaviors, eating and exercise. However, little is known about their interaction on a motivational and behavioral level. Based on the Hierarchical Model of Motivation the authors examined whether exercise-specific motivation can transfer to eating regulation during a lifestyle weight control program. The authors further investigated whether general, treatment-related, and exercise motivation underlie the relation between increased exercise and improved eating regulation. Overweight/obese women participated in a 1-year randomized controlled trial (N = 239). The intervention focused on promoting physical activity and internal motivation for exercise and weight loss, following Self-Determination Theory. The control group received general health education. General and exercise specific self-determination, eating self-regulation variables, and physical activity behavior. General self-determination and more autonomous exercise motivation predicted eating self-regulation over 12 months. Additionally, general and exercise self-determination fully mediated the relation between physical activity and eating self-regulation. Increased general self-determination and exercise motivation seem to facilitate improvements in eating self-regulation during weight control in women. These motivational mechanisms also underlie the relationship between improvements in exercise behavior and eating regulation. PsycINFO Database Record (c) 2009 APA, all rights reserved.

LA Sprouts: A 12-Week Gardening, Nutrition, and Cooking Randomized Control Trial Improves Determinants of Dietary Behaviors.

PubMed

Davis, Jaimie N; Martinez, Lauren C; Spruijt-Metz, Donna; Gatto, Nicole M

2016-01-01

To evaluate the effect of an exploratory 12-week nutrition, cooking, and gardening trial (LA Sprouts) on preference for fruit and vegetables (FV); willingness to try FV; identification of FV; self-efficacy to garden, eat, and cook FV; motivation to garden, eat, and cook FV; attitudes toward FV; nutrition and gardening knowledge; and home gardening habits. Randomized controlled trial. Four elementary schools. Three hundred four predominately Hispanic/Latino third- through fifth-grade students were randomized to either the LA Sprouts group (n = 167 students) or control group (n = 137 students). Twelve-week after-school nutrition, cooking, and gardening intervention. Determinants of dietary behavior as measured by questionnaire at baseline and postintervention. Analyses of covariance. After the 12-week program, compared with controls, LA Sprouts participants improved scores for identification of vegetables (+11% vs +5%; P = .001) and nutrition and gardening knowledge (+14.5% vs -5.0%; P = .003), and were more likely to garden at home (+7.5% vs -4.4%; P = .003). The LA Sprouts program positively affected a number of determinants of dietary behaviors that suggest possible mechanisms by which gardening and nutrition education act to improve dietary intake and health outcomes. Copyright © 2016 Society for Nutrition Education and Behavior. Published by Elsevier Inc. All rights reserved.

Endocrine mechanisms, behavioral phenotypes and plasticity: known relationships and open questions.

PubMed

Hau, Michaela; Goymann, Wolfgang

2015-01-01

Behavior of wild vertebrate individuals can vary in response to environmental or social factors. Such within-individual behavioral variation is often mediated by hormonal mechanisms. Hormones also serve as a basis for among-individual variations in behavior including animal personalities and the degree of responsiveness to environmental and social stimuli. How do relationships between hormones and behavioral traits evolve to produce such behavioral diversity within and among individuals? Answering questions about evolutionary processes generating among-individual variation requires characterizing how specific hormones are related to variation in specific behavioral traits, whether observed hormonal variation is related to individual fitness and, whether hormonal traits are consistent (repeatable) aspects of an individual's phenotype. With respect to within-individual variation, we need to improve our insight into the nature of the quantitative relationships between hormones and the traits they regulate, which in turn will determine how they may mediate behavioral plasticity of individuals. To address these questions, we review the actions of two steroid hormones, corticosterone and testosterone, in mediating changes in vertebrate behavior, focusing primarily on birds. In the first part, we concentrate on among-individual variation and present examples for how variation in corticosterone concentrations can relate to behaviors such as exploration of novel environments and parental care. We then review studies on correlations between corticosterone variation and fitness, and on the repeatability over time of corticosterone concentrations. At the end of this section, we suggest that further progress in our understanding of evolutionary patterns in the hormonal regulation of behavior may require, as one major tool, reaction norm approaches to characterize hormonal phenotypes as well as their responses to environments. In the second part, we discuss types of quantitative relationships between hormones and behavioral traits within individuals, using testosterone as an example. We review conceptual models for testosterone-behavior relationships and discuss the relevance of these models for within-individual plasticity in behavior. Next, we discuss approaches for testing the nature of quantitative relationships between testosterone and behavior, concluding that again reaction norm approaches might be a fruitful way forward. We propose that an integration of new tools, especially of reaction norm approaches into the field of behavioral endocrinology will allow us to make significant progress in our understanding of the mechanisms, the functional implications and the evolution of hormone-behavior relationships that mediate variation both within and among individuals. This knowledge will be crucial in light of already ongoing habitat alterations due to global change, as it will allow us to evaluate the mechanisms as well as the capacity of wild populations to adjust hormonally-mediated behaviors to altered environmental conditions.

Influence of Austenitizing Parameters on Mechanical Behavior of Press Hardened Steels

NASA Astrophysics Data System (ADS)

Golem, Lindsay

Recent increases in the Corporate Average Fuel Economy standard have led to an increased focus on lightweight materials for use in vehicle architectures. In particular, press hardened steels (PHS) have been identified as suitable materials to reduce vehicle mass while maintaining or possibly improving vehicle crash performance. A fundamental understanding of the mechanical behavior of PHS with respect to changes in processing conditions is critical to their proper use. In this work, 22MnB5 Al-Si coated blanks were austenitized at several different times and temperatures to produce a range of prior austenite grain sizes. Mechanical behavior was evaluated using smooth sided tensile testing, double edge notch tensile testing, and free bend testing. Metrics, such as notch tensile strength, notch strength ratio, and notch displacement, which is based on the fracture mechanics parameter crack tip opening displacement, were derived from double edge notch tensile testing to assess material notch sensitivity and toughness as a function of processing conditions. Additionally, bend angle at maximum load, post uniform bending slope, and energy for fracture were measured using free bend testing to provide another means for evaluating mechanical behavior. Increasing the austenitizing temperature and hold time resulted in an increase in the measured prior austenite grain size; however, elevated austenitizing temperatures also increased the thickness of the coating interdiffusion layer. In the coated material, tensile strength decreased with increasing prior austenite grain size for both notched and smooth sided tensile samples, but minimal difference was observed in the strain to failure results. Notch displacement, bend angle at maximum load, and energy for fracture during free bend testing all decreased with increasing prior austenite grain size in the coated PHS and also showed a significant drop in measured behavior for the 1025 °C for 30 minutes austenitizing condition, which was not observed in smooth sided tensile testing. The drop in mechanical behavior for this condition was not observed when the coating was removed, which suggests that the interdiffusion layer may degrade the mechanical behavior of PHS. Bend angle at maximum load and energy for fracture in bend testing also decreased for the smallest prior austenite grain size conditions, which was not observed in any of the other testing methods. Results from the three testing methods indicate that differences in the stress and strain state associated with each test influences their ability to discern differences between microstructure and processing conditions of press hardened steels.

Application of mobile technology for improving expanded program on immunization among highland minority and stateless populations in northern Thailand border.

PubMed

Kaewkungwal, Jaranit; Apidechkul, Tawatchai; Jandee, Kasemsak; Khamsiriwatchara, Amnat; Lawpoolsri, Saranath; Sawang, Surasak; Sangvichean, Aumnuyphan; Wansatid, Peerawat; Krongrungroj, Sarinya

2015-01-14

Studies of undervaccinated children of minority/stateless populations have highlighted significant barriers at individual, community, and state levels. These include geography-related difficulties, poverty, and social norms/beliefs. The objective of this study was to assess project outcomes regarding immunization coverage, as well as maternal attitudes and practices toward immunization. The "StatelessVac" project was conducted in Thailand-Myanmar-Laos border areas using cell phone-based mechanisms to increase immunization coverage by incorporating phone-to-phone information sharing for both identification and prevention. With limitation of the study among vulnerable populations in low-resource settings, the pre/post assessments without comparison group were conducted. Immunization coverage was collected from routine monthly reports while behavior-change outcomes were from repeat surveys. This study revealed potential benefits of the initiative for case identification; immunization coverage showed an improved trend. Prevention strategies were successfully integrated into the routine health care workflows of immunization activities at point-of-care. A behavior-change-communication package contributes significantly in raising both concern and awareness in relation to child care. The mobile technology has proven to be an effective mechanism in improving a children's immunization program among these hard-to-reach populations. Part of the intervention has now been revised for use at health centers across the country.

Effects of Ce on Inclusions, Microstructure, Mechanical Properties, and Corrosion Behavior of AISI 202 Stainless Steel

NASA Astrophysics Data System (ADS)

Cai, Guojun; Li, Changsheng

2015-10-01

The sizes and morphologies of nonmetallic inclusions, microhardness, tensile strength, and Charpy impact toughness in AISI 202 stainless steel with different Ce contents were synthetically analyzed by means of SEM, TEM, microhardness tester, and tensile and Charpy impact tests. Effects of Ce addition on the corrosion behavior were investigated in 5 wt.% H2SO4 solution for different periods of time through measuring AC impedance. The EIS measurements indicate that the steels with Ce addition exhibit higher R p values than those without Ce, which illustrates the relative resistance to uniform corrosion is accompanied by an increasing Ce addition. Ce addition to AISI 202 stainless steel improves its uniform corrosion resistance owing to metamorphic inclusions and the improvement of electrode potential in matrix. Upon increasing Ce addition, the indentation morphology of samples transfers from sink-in types to pile-up types, explaining good machinability of steels containing Ce. It is witnessed from the fracture mode that Ce refines the grain size of steels, significantly increasing the strength; in the meantime, its plasticity is improved, thereby solving the contradiction between the strength and the plasticity of steels. It is concluded that AISI 202 stainless steel with 0.016 wt.% Ce addition in the mass fraction has the best mechanical properties and the uniform corrosion resistance.

What does theory-driven evaluation add to the analysis of self-reported outcomes of diabetes education? A comparative realist evaluation of a participatory patient education approach.

PubMed

Pals, Regitze A S; Olesen, Kasper; Willaing, Ingrid

2016-06-01

To explore the effects of the Next Education (NEED) patient education approach in diabetes education. We tested the use of the NEED approach at eight intervention sites (n=193). Six additional sites served as controls (n=58). Data were collected through questionnaires, interviews and observations. We analysed data using descriptive statistics, logistic regression and systematic text condensation. Results from logistic regression demonstrated better overall assessment of education program experiences and enhanced self-reported improvements in maintaining medications correctly among patients from intervention sites, as compared to control sites. Interviews and observations suggested that improvements in health behavior could be explained by mechanisms related to the education setting, including using person-centeredness and dialogue. However, similar mechanisms were observed at control sites. Observations suggested that the quality of group dynamics, patients' motivation and educators' ability to facilitate participation in education, supported by the NEED approach, contributed to better results at intervention sites. The use of participatory approaches and, in particular, the NEED patient education approach in group-based diabetes education improved self-management skills and health behavior outcomes among individuals with diabetes. The use of dialogue tools in diabetes education is advised for educators. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

In vitro biodegradation behavior, mechanical properties, and cytotoxicity of biodegradable Zn–Mg alloy

PubMed Central

Gong, Haibo; Wang, Kun; Strich, Randy; Zhou, Jack G.

2017-01-01

Zinc–Magnesium (Zn–Mg) alloy as a novel biodegradable metal holds great potential in biodegradable implant applications as it is more corrosion resistant than Magnesium (Mg). However, the mechanical properties, biodegradation uniformity, and cytotoxicity of Zn–Mg alloy remained as concerns. In this study, hot extrusion process was applied to Zn–1 wt % Mg (Zn–1Mg) to refine its microstructure. Effects of hot extrusion on biodegradation behavior and mechanical properties of Zn–1Mg were investigated in comparison with Mg rare earth element alloy WE43. Metallurgical analysis revealed significant grain size reduction, and immersion test found that corrosion rates of WE43 and Zn–1Mg were reduced by 35% and 57%, respectively after extrusion. Moreover, hot extrusion resulted in a much more uniform biodegradation in extruded Zn–1Mg alloy and WE43. In vitro cytotoxicity test results indicated that Zn–1Mg alloy was biocompatible. Therefore, hot extruded Zn–1Mg with homogenous microstructure, uniform as well as slow degradation, improved mechanical properties, and good biocompatibility was believed to be an excellent candidate material for load-bearing biodegradable implant application. PMID:25581552

Mechanical improvement of metal reinforcement rings for a finite ring-shaped superconducting bulk

NASA Astrophysics Data System (ADS)

Huang, Chen-Guang; Zhou, You-He

2018-03-01

As a key technique, reinforcement of type-II superconducting bulks with metal rings can efficiently improve their mechanical properties to enhance the maximum trapped field. In this paper, we study the magnetostrictive and fracture behaviors of a finite superconducting ring bulk reinforced by three typical reinforcing structures composed of metal rings during the magnetizing process by means of the minimization of magnetic energy and the finite element method. After a field-dependent critical current density is adopted, the magnetostriction, pinning-induced stress, and crack tip stress intensity factor are calculated considering the demagnetization effects. The results show that the mechanical properties of the ring bulk are strongly dependent on the reinforcing structure and the material and geometrical parameters of the metal rings. Introducing the metal ring can significantly reduce the hoop stress, and the reduction effect by internal reinforcement is much improved relative to external reinforcement. By comparison, bilateral reinforcement seems to be the best candidate structure. Only when the metal rings have particular Young's modulus and radial thickness will they contribute to improve the mechanical properties the most. In addition, if an edge crack is pre-existing in the ring bulk, the presence of metal rings can effectively avoid crack propagation since it reduces the crack tip stress intensity factor by nearly one order of magnitude.

Genetic predisposition to high anxiety- and depression-like behavior coincides with diminished DNA methylation in the adult rat amygdala

PubMed Central

McCoy, Chelsea R.; Jackson, Nateka L.; Day, Jeremy; Clinton, Sarah M.

2016-01-01

Understanding biological mechanisms that shape vulnerability to emotional dysfunction is critical for elucidating the neurobiology of psychiatric illnesses like anxiety and depression. To elucidate molecular and epigenetic alterations in the brain that contribute to individual differences in emotionality, our laboratory utilized a rodent model of temperamental differences. Rats bred for low response to novelty (Low Responders, LRs) are inhibited in novel situations and display high anxiety, helplessness, and diminished sociability compared to High Novelty Responder (HR) rats. Our current transcriptome profiling experiment identified widespread gene expression differences in the amygdala of adult HR/LR rats; we hypothesize that HR/LR gene expression and downstream behavioral differences stem from distinct epigenetic (specifically DNA methylation) patterning in the HR/LR brain. Although we found similar levels of DNA methyltransferase proteins in the adult HR/LR amygdala, next-generation sequencing analysis of the methylome revealed 793 differentially methylated genomic sites between the groups. Most of the differentially methylated sites were hypermethylated in HR versus LR, so we next tested the hypothesis that enhancing DNA methylation in LRs would improve their anxiety/depression-like phenotype. We found that increasing DNA methylation in LRs (via increased dietary methyl donor content) improved their anxiety-like behavior and decreased their typically high levels of Forced Swim Test (FST) immobility; however, dietary methyl donor depletion exacerbated LRs’ high FST immobility. These data are generally consistent with findings in depressed patients showing that treatment with DNA methylation-promoting agents improves depressive symptoms, and highlight epigenetic mechanisms that may contribute to individual differences in risk for emotional dysfunction. PMID:27965039

Novel Interventions to Reduce Stress and Overeating in Overweight Pregnant Women: A Feasibility Study.

PubMed

Laraia, B A; Adler, N E; Coleman-Phox, K; Vieten, C; Mellin, L; Kristeller, J L; Thomas, M; Stotland, N E; Lustig, R H; Dallman, M F; Hecht, F M; Bush, N R; de Groat, C L; Epel, E

2018-05-01

Background High stress and depression during pregnancy are risk factors for worsened health trajectories for both mother and offspring. This is also true for pre-pregnancy obesity and excessive gestational weight gain. Reducing stress and depression may be one path to prevent excessive caloric intake and gestational weight gain. Study Purpose We tested the feasibility of two novel interventions aimed at reducing stress and overeating during pregnancy. Reflecting different theoretical underpinnings, the interventions target different mechanisms. Mindful Moms Training (MMT) uses mindfulness to improve awareness and acceptance of experiences and promote conscious rather than automatic behavior choices. Emotional Brain Training (EBT) uses active coping to change perceptions of negative experience and promote positive affective states. Methods Forty-six overweight/obese low-income women were assigned to either MMT (n = 24) or EBT (n = 22) for an 8-week feasibility study. Pre-post changes in perceived stress, eating and presumed mechanisms were assessed. Results Women reported high levels of stress at baseline. Both interventions were well attended and demonstrated clinically significant pre-post reductions in stress, depressive symptoms, and improved eating behaviors. MMT significantly decreased experiential avoidance, whereas EBT significantly increased positive reappraisal; these changes were marginally significantly different by group. Conclusions This feasibility study found that both interventions promoted meaningful reductions in stress and depressive symptoms and improved reported eating behaviors in a high-risk group of pregnant women. Each intervention has a potentially different pathway-acceptance for MMT and reappraisal for EBT. Larger studies are needed to test efficacy on longer term reductions in stress and overeating.

Enhanced nonlinear current-voltage behavior in Au nanoparticle dispersed CaCu 3 Ti 4 O 12 composite films

NASA Astrophysics Data System (ADS)

Chen, Cong; Wang, Can; Ning, Tingyin; Lu, Heng; Zhou, Yueliang; Ming, Hai; Wang, Pei; Zhang, Dongxiang; Yang, Guozhen

2011-10-01

An enhanced nonlinear current-voltage behavior has been observed in Au nanoparticle dispersed CaCu 3Ti 4O 12 composite films. The double Schottky barrier model is used to explain the enhanced nonlinearity in I-V curves. According to the energy-band model and fitting result, the nonlinearity in Au: CCTO film is mainly governed by thermionic emission in the reverse-biased Schottky barrier. This result not only supports the mechanism of double Schottky barrier in CCTO, but also indicates that the nonlinearity of current-voltage behavior could be improved in nanometal composite films, which has great significance for the resistance switching devices.

Why Chunking Should be Considered as an Explanation for Developmental Change before Short-Term Memory Capacity and Processing Speed

PubMed Central

Jones, Gary

2012-01-01

The chunking hypothesis suggests that during the repeated exposure of stimulus material, information is organized into increasingly larger chunks. Many researchers have not considered the full power of the chunking hypothesis as both a learning mechanism and as an explanation of human behavior. Indeed, in developmental psychology there is relatively little mention of chunking and yet it can be the underlying cause of some of the mechanisms of development that have been proposed. This paper illustrates the chunking hypothesis in the domain of non-word repetition, a task that is a strong predictor of a child’s language learning. A computer simulation of non-word repetition that instantiates the chunking mechanism shows that: (1) chunking causes task behavior to improve over time, consistent with children’s performance; and (2) chunking causes perceived changes in areas such as short-term memory capacity and processing speed that are often cited as mechanisms of child development. Researchers should be cautious when considering explanations of developmental data, since chunking may be able to explain differences in performance without the need for additional mechanisms of development. PMID:22715331

How does a specific learning and memory system in the mammalian brain gain control of behavior?

PubMed

McDonald, Robert J; Hong, Nancy S

2013-11-01

This review addresses a fundamental, yet poorly understood set of issues in systems neuroscience. The issues revolve around conceptualizations of the organization of learning and memory in the mammalian brain. One intriguing, and somewhat popular, conceptualization is the idea that there are multiple learning and memory systems in the mammalian brain and they interact in different ways to influence and/or control behavior. This approach has generated interesting empirical and theoretical work supporting this view. One issue that needs to be addressed is how these systems influence or gain control of voluntary behavior. To address this issue, we clearly specify what we mean by a learning and memory system. We then review two types of processes that might influence which memory system gains control of behavior. One set of processes are external factors that can affect which system controls behavior in a given situation including task parameters like the kind of information available to the subject, types of training experience, and amount of training. The second set of processes are brain mechanisms that might influence what memory system controls behavior in a given situation including executive functions mediated by the prefrontal cortex; switching mechanisms mediated by ascending neurotransmitter systems, the unique role of the hippocampus during learning. The issue of trait differences in control of different learning and memory systems will also be considered in which trait differences in learning and memory function are thought to potentially emerge from differences in level of prefrontal influence, differences in plasticity processes, differences in ascending neurotransmitter control, differential access to effector systems like motivational and motor systems. Finally, we present scenarios in which different mechanisms might interact. This review was conceived to become a jumping off point for new work directed at understanding these issues. The outcome of this work, in combination with other approaches, might improve understanding of the mechanisms of volition in human and non-human animals. Copyright © 2013 Wiley Periodicals, Inc.

Influence of Bi addition on the property of Ag-Bi nano-composite coatings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, Yuxin; Tay, See Leng; Zhou, Xiaowei

Silver (Ag) coatings have been widely used in many industry areas due to their excellent conductivity. However, wider applications of Ag coatings have been hindered by their poor mechanical properties. In this research, to improve the mechanical performance, Ag-Bi nano-composite coatings were prepared by a novel ionic co-discharge method. A systematic study of the microstructure, mechanical properties, electrical conductivity and antibacterial behavior of the resulting coating was performed. The results indicated that after adding an appropriate amount of Bi containing solution into the Ag plating solution, Ag-Bi nanoparticles were in-situ formed and distributed uniformly throughout the coating matrix, resulting inmore » a significant improvement in the mechanical properties. The hardness of Ag-Bi coating was increased by 60% compared to that of the pure Ag coating. The corrosion resistance of Ag-Bi coatings was also enhanced. The Ag-Bi coatings prepared in the current study will find a broader application in electronics, jewelry, aerospace and other industries.« less

Influence of Bi addition on the property of Ag-Bi nano-composite coatings

DOE PAGES

Wang, Yuxin; Tay, See Leng; Zhou, Xiaowei; ...

2018-03-26

Silver (Ag) coatings have been widely used in many industry areas due to their excellent conductivity. However, wider applications of Ag coatings have been hindered by their poor mechanical properties. In this research, to improve the mechanical performance, Ag-Bi nano-composite coatings were prepared by a novel ionic co-discharge method. A systematic study of the microstructure, mechanical properties, electrical conductivity and antibacterial behavior of the resulting coating was performed. The results indicated that after adding an appropriate amount of Bi containing solution into the Ag plating solution, Ag-Bi nanoparticles were in-situ formed and distributed uniformly throughout the coating matrix, resulting inmore » a significant improvement in the mechanical properties. The hardness of Ag-Bi coating was increased by 60% compared to that of the pure Ag coating. The corrosion resistance of Ag-Bi coatings was also enhanced. The Ag-Bi coatings prepared in the current study will find a broader application in electronics, jewelry, aerospace and other industries.« less

Cellulose whiskers versus microfibrils: influence of the nature of the nanoparticle and its surface functionalization on the thermal and mechanical properties of nanocomposites.

PubMed

Siqueira, Gilberto; Bras, Julien; Dufresne, Alain

2009-02-09

In the present work, nanowhiskers and microfibrillated cellulose (MFC) both extracted from sisal were used to reinforce polycaprolactone (PCL). We report the influence of the nanoparticle's nature on the mechanical and thermal properties of the ensuing nanocomposites. The surface of both the nanoparticles was chemically modified to improve their compatibilization with the polymeric matrix. N-Octadecyl isocyanate (C18H37NCO) was used as the grafting agent. PCL nanocomposite films reinforced with sisal whiskers or MFC (raw or chemically modified) were prepared by film casting. The thermal behavior (Tg, Tm, Tc, and degree of crystallinity) and the mechanical properties of the nanocomposites in both the linear and the nonlinear range were determined using differential scanning calorimetry (DSC), dynamical mechanical analysis (DMA), and tensile tests, respectively. Significant differences were reported according to the nature of the nanoparticle and amount of nanofillers used as reinforcement. It was also proved that the chemical treatment clearly improves the ultimate properties of the nanocomposites.

Effect of Terminal Modification on the Molecular Assembly and Mechanical Properties of Protein-Based Block Copolymers.

PubMed

Jacobsen, Matthew M; Tokareva, Olena S; Ebrahimi, Davoud; Huang, Wenwen; Ling, Shengjie; Dinjaski, Nina; Li, David; Simon, Marc; Staii, Cristian; Buehler, Markus J; Kaplan, David L; Wong, Joyce Y

2017-09-01

Accurate prediction and validation of the assembly of bioinspired peptide sequences into fibers with defined mechanical characteristics would aid significantly in designing and creating materials with desired properties. This process may also be utilized to provide insight into how the molecular architecture of many natural protein fibers is assembled. In this work, computational modeling and experimentation are used in tandem to determine how peptide terminal modification affects a fiber-forming core domain. Modeling shows that increased terminal molecular weight and hydrophilicity improve peptide chain alignment under shearing conditions and promote consolidation of semicrystalline domains. Mechanical analysis shows acute improvements to strength and elasticity, but significantly reduced extensibility and overall toughness. These results highlight an important entropic function that terminal domains of fiber-forming peptides exhibit as chain alignment promoters, which ultimately has notable consequences on the mechanical behavior of the final fiber products. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Artificial Neural Network Based Mission Planning Mechanism for Spacecraft

NASA Astrophysics Data System (ADS)

Li, Zhaoyu; Xu, Rui; Cui, Pingyuan; Zhu, Shengying

2018-04-01

The ability to plan and react fast in dynamic space environments is central to intelligent behavior of spacecraft. For space and robotic applications, many planners have been used. But it is difficult to encode the domain knowledge and directly use existing techniques such as heuristic to improve the performance of the application systems. Therefore, regarding planning as an advanced control problem, this paper first proposes an autonomous mission planning and action selection mechanism through a multiple layer perceptron neural network approach to select actions in planning process and improve efficiency. To prove the availability and effectiveness, we use autonomous mission planning problems of the spacecraft, which is a sophisticated system with complex subsystems and constraints as an example. Simulation results have shown that artificial neural networks (ANNs) are usable for planning problems. Compared with the existing planning method in EUROPA, the mechanism using ANNs is more efficient and can guarantee stable performance. Therefore, the mechanism proposed in this paper is more suitable for planning problems of spacecraft that require real time and stability.

Improvement of a Quantum Proxy Blind Signature Scheme

NASA Astrophysics Data System (ADS)

Zhang, Jia-Lei; Zhang, Jian-Zhong; Xie, Shu-Cui

2018-02-01

Improvement of a quantum proxy blind signature scheme is proposed in this paper. Six-qubit entangled state functions as quantum channel. In our scheme, a trust party Trent is introduced so as to avoid David's dishonest behavior. The receiver David verifies the signature with the help of Trent in our scheme. The scheme uses the physical characteristics of quantum mechanics to implement message blinding, delegation, signature and verification. Security analysis proves that our scheme has the properties of undeniability, unforgeability, anonymity and can resist some common attacks.

Improvement of a Quantum Proxy Blind Signature Scheme

NASA Astrophysics Data System (ADS)

Zhang, Jia-Lei; Zhang, Jian-Zhong; Xie, Shu-Cui

2018-06-01

Improvement of a quantum proxy blind signature scheme is proposed in this paper. Six-qubit entangled state functions as quantum channel. In our scheme, a trust party Trent is introduced so as to avoid David's dishonest behavior. The receiver David verifies the signature with the help of Trent in our scheme. The scheme uses the physical characteristics of quantum mechanics to implement message blinding, delegation, signature and verification. Security analysis proves that our scheme has the properties of undeniability, unforgeability, anonymity and can resist some common attacks.

Improving Attachments of Remotely-Deployed Dorsal Fin-Mounted Tags: Tissue Structure, Hydrodynamics, in Situ Performance, and Tagged-Animal Follow-up

DTIC Science & Technology

2012-09-30

design and test improved retention systems 4. Conduct follow-up studies of tagged whales to accurately quantify wound healing and the effects of...e.g., beaked whale versus melon-headed whale). 3. In situ behavior of retention system elements (Key individuals: Andrews, Schorr, Hanson, Howle...have a good idea of how the LIMPET retention system operates when first implanted, we do not fully understand the mechanics in a living fin. Therefore

A systematic study of mechanical properties, corrosion behavior and biocompatibility of AZ31B Mg alloy after ultrasonic nanocrystal surface modification.

PubMed

Hou, Xiaoning; Qin, Haifeng; Gao, Hongyu; Mankoci, Steven; Zhang, Ruixia; Zhou, Xianfeng; Ren, Zhencheng; Doll, Gary L; Martini, Ashlie; Sahai, Nita; Dong, Yalin; Ye, Chang

2017-09-01

Magnesium alloys have tremendous potential for biomedical applications due to their good biocompatibility, osteoconductivity, and degradability, but can be limited by their poor mechanical properties and fast corrosion in the physiological environment. In this study, ultrasonic nanocrystal surface modification (UNSM), a recently developed surface processing technique that utilizes ultrasonic impacts to induce plastic strain on metal surfaces, was applied to an AZ31B magnesium (Mg) alloy. The mechanical properties, corrosion resistance, and biocompatibility of the alloy after UNSM treatment were studied systematically. Significant improvement in hardness, yield stress and wear resistance was achieved after the UNSM treatment. In addition, the corrosion behavior of UNSM-treated AZ31B was not compromised compared with the untreated samples, as demonstrated by the weight loss and released element concentrations of Mg and Al after immersion in alpha-minimum essential medium (α-MEM) for 24h. The in vitro biocompatibility of the AZ31B Mg alloys toward adipose-derived stem cells (ADSCs) before and after UNSM processing was also evaluated using a cell culture study. Comparable cell attachments were achieved between the two groups. These studies showed that UNSM could significantly improve the mechanical properties of Mg alloys without compromising their corrosion rate and biocompatibility in vitro. These findings suggest that UNSM is a promising method to treat biodegradable Mg alloys for orthopaedic applications. Copyright © 2017 Elsevier B.V. All rights reserved.

Exploring transduction mechanisms of protein transduction domains (PTDs) in living cells utilizing single-quantum dot tracking (SQT) technology.

PubMed

Suzuki, Yasuhiro

2012-01-01

Specific protein domains known as protein transduction domains (PTDs) can permeate cell membranes and deliver proteins or bioactive materials into living cells. Various approaches have been applied for improving their transduction efficacy. It is, therefore, crucial to clarify the entry mechanisms and to identify the rate-limiting steps. Because of technical limitations for imaging PTD behavior on cells with conventional fluorescent-dyes, how PTDs enter the cells has been a topic of much debate. Utilizing quantum dots (QDs), we recently tracked the behavior of PTD that was derived from HIV-1 Tat (TatP) in living cells at the single-molecule level with 7-nm special precision. In this review article, we initially summarize the controversy on TatP entry mechanisms; thereafter, we will focus on our recent findings on single-TatP-QD tracking (SQT), to identify the major sequential steps of intracellular delivery in living cells and to discuss how SQT can easily provide direct information on TatP entry mechanisms. As a primer for SQT study, we also discuss the latest findings on single particle tracking of various molecules on the plasma membrane. Finally, we discuss the problems of QDs and the challenges for the future in utilizing currently available QD probes for SQT. In conclusion, direct identification of the rate-limiting steps of PTD entry with SQT should dramatically improve the methods for enhancing transduction efficiency.

Long-Term Mechanical Behavior of Nano Silica Sol Grouting

PubMed Central

Zhang, Nong; Zhang, Chenghao; Qian, Deyu; Han, Changliang; Yang, Sen

2018-01-01

The longevity of grouting has a significant effect on the safe and sustainable operation of many engineering projects. A 500-day experiment was carried out to study the long-term mechanical behavior of nano silica sol grouting. The nano silica sol was activated with different proportions of a NaCl catalyst and cured under fluctuating temperature and humidity conditions. The mechanical parameters of the grout samples were tested using an electrohydraulic uniaxial compression tester and an improved Vicat instrument. Scanning electron microscope, X-ray diffraction, and ultrasonic velocity tests were carried out to analyze the strength change micro-mechanism. Tests showed that as the catalyst dosage in the grout mix is decreased, the curves on the graphs showing changes in the weight and geometric parameters of the samples over time could be divided into three stages, a shrinkage stage, a stable stage, and a second shrinkage stage. The catalyst improved the stability of the samples and reduced moisture loss. Temperature rise was also a driving force for moisture loss. Uniaxial compressive stress-strain curves for all of the samples were elastoplastic. The curves for uniaxial compression strength and secant modulus plotted against time could be divided into three stages. Sample brittleness increased with time and the brittleness index increased with higher catalyst dosages in the latter part of the curing time. Plastic strength-time curves exhibit allometric scaling. Curing conditions mainly affect the compactness, and then affect the strength. PMID:29337897

Environmental Enrichment Duration Differentially Affects Behavior and Neuroplasticity in Adult Mice.

PubMed

Leger, Marianne; Paizanis, Eleni; Dzahini, Kwamivi; Quiedeville, Anne; Bouet, Valentine; Cassel, Jean-Christophe; Freret, Thomas; Schumann-Bard, Pascale; Boulouard, Michel

2015-11-01

Environmental enrichment is a powerful way to stimulate brain and behavioral plasticity. However the required exposure duration to reach such changes has not been substantially analyzed. We aimed to assess the time-course of appearance of the beneficial effects of enriched environment. Thus, different behavioral tests and neurobiological parameters (such as neurogenesis, brain monoamines levels, and stress-related hormones) were concomitantly realized after different durations of enriched environment (24 h, 1, 3, or 5 weeks). While short enrichment exposure (24 h) was sufficient to improve object recognition memory performances, a 3-week exposure was required to improve aversive stimulus-based memory performances and to reduce anxiety-like behavior; effects that were not observed with longer duration. The onset of behavioral changes after a 3-week exposure might be supported by higher serotonin levels in the frontal cortex, but seems independent of neurogenesis phenomenon. Additionally, the benefit of 3-week exposure on memory was not observed 3 weeks after cessation of enrichment. Thus, the 3-week exposure appears as an optimal duration in order to induce the most significant behavioral effects and to assess the underlying mechanisms. Altogether, these results suggest that the duration of exposure is a keystone of the beneficial behavioral and neurobiological effects of environmental enrichment. © The Author 2014. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

Imitation learning based on an intrinsic motivation mechanism for efficient coding

PubMed Central

Triesch, Jochen

2013-01-01

A hypothesis regarding the development of imitation learning is presented that is rooted in intrinsic motivations. It is derived from a recently proposed form of intrinsically motivated learning (IML) for efficient coding in active perception, wherein an agent learns to perform actions with its sense organs to facilitate efficient encoding of the sensory data. To this end, actions of the sense organs that improve the encoding of the sensory data trigger an internally generated reinforcement signal. Here it is argued that the same IML mechanism might also support the development of imitation when general actions beyond those of the sense organs are considered: The learner first observes a tutor performing a behavior and learns a model of the the behavior's sensory consequences. The learner then acts itself and receives an internally generated reinforcement signal reflecting how well the sensory consequences of its own behavior are encoded by the sensory model. Actions that are more similar to those of the tutor will lead to sensory signals that are easier to encode and produce a higher reinforcement signal. Through this, the learner's behavior is progressively tuned to make the sensory consequences of its actions match the learned sensory model. I discuss this mechanism in the context of human language acquisition and bird song learning where similar ideas have been proposed. The suggested mechanism also offers an account for the development of mirror neurons and makes a number of predictions. Overall, it establishes a connection between principles of efficient coding, intrinsic motivations and imitation. PMID:24204350

Kindness in the blood: A randomized controlled trial of the gene regulatory impact of prosocial behavior.

PubMed

Nelson-Coffey, S Katherine; Fritz, Megan M; Lyubomirsky, Sonja; Cole, Steve W

2017-07-01

Prosocial behavior is linked to longevity, but few studies have experimentally manipulated prosocial behavior to identify the causal mechanisms underlying this association. One possible mediating pathway involves changes in gene expression that may subsequently influence disease development or resistance. In the current study, we examined changes in a leukocyte gene expression profile known as the Conserved Transcriptional Response to Adversity (CTRA) in 159 adults who were randomly assigned for 4 weeks to engage in prosocial behavior directed towards specific others, prosocial behavior directed towards the world in general, self-focused kindness, or a neutral control task. Those randomized to prosocial behavior towards specific others demonstrated improvements (i.e., reductions) in leukocyte expression of CTRA indicator genes. No significant changes in CTRA gene expression were observed in the other 3 conditions. These findings suggest that prosocial behavior can causally impact leukocyte gene expression profiles in ways that might potentially help explain the previously observed health advantages associated with social ties. Copyright © 2017 Elsevier Ltd. All rights reserved.

Advancing Models and Theories for Digital Behavior Change Interventions.

PubMed

Hekler, Eric B; Michie, Susan; Pavel, Misha; Rivera, Daniel E; Collins, Linda M; Jimison, Holly B; Garnett, Claire; Parral, Skye; Spruijt-Metz, Donna

2016-11-01

To be suitable for informing digital behavior change interventions, theories and models of behavior change need to capture individual variation and changes over time. The aim of this paper is to provide recommendations for development of models and theories that are informed by, and can inform, digital behavior change interventions based on discussions by international experts, including behavioral, computer, and health scientists and engineers. The proposed framework stipulates the use of a state-space representation to define when, where, for whom, and in what state for that person, an intervention will produce a targeted effect. The "state" is that of the individual based on multiple variables that define the "space" when a mechanism of action may produce the effect. A state-space representation can be used to help guide theorizing and identify crossdisciplinary methodologic strategies for improving measurement, experimental design, and analysis that can feasibly match the complexity of real-world behavior change via digital behavior change interventions. Copyright © 2016 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

Insufficiency of the Young’s modulus for illustrating the mechanical behavior of GaN nanowires

NASA Astrophysics Data System (ADS)

Zamani Kouhpanji, Mohammad Reza; Behzadirad, Mahmoud; Feezell, Daniel; Busani, Tito

2018-05-01

We use a non-classical modified couple stress theory including the acceleration gradients (MCST-AG), to precisely demonstrate the size dependency of the mechanical properties of gallium nitride (GaN) nanowires (NWs). The fundamental elastic constants, Young’s modulus and length scales of the GaN NWs were estimated both experimentally, using a novel experimental technique applied to atomic force microscopy, and theoretically, using atomic simulations. The Young’s modulus, static and the dynamic length scales, calculated with the MCST-AG, were found to be 323 GPa, 13 and 14.5 nm, respectively, for GaN NWs from a few nanometers radii to bulk radii. Analyzing the experimental data using the classical continuum theory shows an improvement in the experimental results by introducing smaller error. Using the length scales determined in MCST-AG, we explain the inconsistency of the Young’s moduli reported in recent literature, and we prove the insufficiency of the Young’s modulus for predicting the mechanical behavior of GaN NWs.

Centella asiatica Extract Improves Behavioral Deficits in a Mouse Model of Alzheimer's Disease: Investigation of a Possible Mechanism of Action

PubMed Central

Soumyanath, Amala; Zhong, Yong-Ping; Henson, Edward; Wadsworth, Teri; Bishop, James; Gold, Bruce G.; Quinn, Joseph F.

2012-01-01

Centella asiatica (CA), commonly named gotu kola, is an Ayurvedic herb used to enhance memory and nerve function. To investigate the potential use of CA in Alzheimer's disease (AD), we examined the effects of a water extract of CA (GKW) in the Tg2576 mouse, a murine model of AD with high β-amyloid burden. Orally administered GKW attenuated β-amyloid-associated behavioral abnormalities in these mice. In vitro, GKW protected SH-SY5Y cells and MC65 human neuroblastoma cells from toxicity induced by exogenously added and endogenously generated β-amyloid, respectively. GKW prevented intracellular β-amyloid aggregate formation in MC65 cells. GKW did not show anticholinesterase activity or protect neurons from oxidative damage and glutamate toxicity, mechanisms of current AD therapies. GKW is rich in phenolic compounds and does not contain asiatic acid, a known CA neuroprotective triterpene. CA thus offers a unique therapeutic mechanism and novel active compounds of potential relevance to the treatment of AD. PMID:22506133

Centella asiatica Extract Improves Behavioral Deficits in a Mouse Model of Alzheimer's Disease: Investigation of a Possible Mechanism of Action.

PubMed

Soumyanath, Amala; Zhong, Yong-Ping; Henson, Edward; Wadsworth, Teri; Bishop, James; Gold, Bruce G; Quinn, Joseph F

2012-01-01

Centella asiatica (CA), commonly named gotu kola, is an Ayurvedic herb used to enhance memory and nerve function. To investigate the potential use of CA in Alzheimer's disease (AD), we examined the effects of a water extract of CA (GKW) in the Tg2576 mouse, a murine model of AD with high β-amyloid burden. Orally administered GKW attenuated β-amyloid-associated behavioral abnormalities in these mice. In vitro, GKW protected SH-SY5Y cells and MC65 human neuroblastoma cells from toxicity induced by exogenously added and endogenously generated β-amyloid, respectively. GKW prevented intracellular β-amyloid aggregate formation in MC65 cells. GKW did not show anticholinesterase activity or protect neurons from oxidative damage and glutamate toxicity, mechanisms of current AD therapies. GKW is rich in phenolic compounds and does not contain asiatic acid, a known CA neuroprotective triterpene. CA thus offers a unique therapeutic mechanism and novel active compounds of potential relevance to the treatment of AD.

Low-Velocity Impact Wear Behavior of Ball-to-Flat Contact Under Constant Kinetic Energy

NASA Astrophysics Data System (ADS)

Wang, Zhang; Cai, Zhen-bing; Chen, Zhi-qiang; Sun, Yang; Zhu, Min-hao

2017-11-01

The impact tests were conducted on metallic materials with different bulk hardness and Young's moduli. Analysis of the dynamics response during the tribological process showed that the tested materials had similar energy absorption, where the peak contact force increased as the tests continued. Moreover, wear volume decreased with the increase in Young's modulus of metals, except for Cr with a relatively low hardness. Wear rate was gradually reduced to a steady stage with increasing cycles, which was attributed to the decrease in contact stress and work-hardening effect. The main wear mechanism of impact was characterized by delamination, and the specific surface degradation mechanisms were depending on the mechanical properties of materials. The absorbed energy was used to the propagation of micro-cracks in the subsurface instead of plastic deformation, when resistance of friction wear and plastic behavior was improved. Hence, both the hardness and Young's modulus played important roles in the impact wear of metallic materials.

Finite-Element Analysis of Current-Induced Thermal Stress in a Conducting Sphere

NASA Astrophysics Data System (ADS)

Liu, Ming; Yang, Fuqian

2012-02-01

Understanding the electrothermal-mechanical behavior of electronic interconnects is of practical importance in improving the structural reliability of electronic devices. In this work, we use the finite-element method to analyze the Joule-heating-induced thermomechanical deformation of a metallic sphere that is sandwiched between two rigid plates. The deformation behavior of the sphere is elastic-perfectly plastic with Young's modulus and yield stress decreasing with temperature. The mechanical stresses created by Joule heating are found to depend on the thermal and mechanical contact conditions between the sphere and the plates. The temperature rise in the sphere for the diathermal condition between the sphere and the plates deviates from the square relation between Joule heat and electric current, due to the temperature dependence of the electrothermal properties of the material. For large electric currents, the simulations reveal the decrease of von Mises stress near the contact interfaces, which suggests that current-induced structural damage will likely occur near the contact interfaces.

ChainMail based neural dynamics modeling of soft tissue deformation for surgical simulation.

PubMed

Zhang, Jinao; Zhong, Yongmin; Smith, Julian; Gu, Chengfan

2017-07-20

Realistic and real-time modeling and simulation of soft tissue deformation is a fundamental research issue in the field of surgical simulation. In this paper, a novel cellular neural network approach is presented for modeling and simulation of soft tissue deformation by combining neural dynamics of cellular neural network with ChainMail mechanism. The proposed method formulates the problem of elastic deformation into cellular neural network activities to avoid the complex computation of elasticity. The local position adjustments of ChainMail are incorporated into the cellular neural network as the local connectivity of cells, through which the dynamic behaviors of soft tissue deformation are transformed into the neural dynamics of cellular neural network. Experiments demonstrate that the proposed neural network approach is capable of modeling the soft tissues' nonlinear deformation and typical mechanical behaviors. The proposed method not only improves ChainMail's linear deformation with the nonlinear characteristics of neural dynamics but also enables the cellular neural network to follow the principle of continuum mechanics to simulate soft tissue deformation.

Insufficiency of the Young's modulus for illustrating the mechanical behavior of GaN nanowires.

PubMed

Kouhpanji, Mohammad Reza Zamani; Behzadirad, Mahmoud; Feezell, Daniel; Busani, Tito

2018-05-18

We use a non-classical modified couple stress theory including the acceleration gradients (MCST-AG), to precisely demonstrate the size dependency of the mechanical properties of gallium nitride (GaN) nanowires (NWs). The fundamental elastic constants, Young's modulus and length scales of the GaN NWs were estimated both experimentally, using a novel experimental technique applied to atomic force microscopy, and theoretically, using atomic simulations. The Young's modulus, static and the dynamic length scales, calculated with the MCST-AG, were found to be 323 GPa, 13 and 14.5 nm, respectively, for GaN NWs from a few nanometers radii to bulk radii. Analyzing the experimental data using the classical continuum theory shows an improvement in the experimental results by introducing smaller error. Using the length scales determined in MCST-AG, we explain the inconsistency of the Young's moduli reported in recent literature, and we prove the insufficiency of the Young's modulus for predicting the mechanical behavior of GaN NWs.

Regulation of Coronary Blood Flow in Health and Ischemic Heart Disease

PubMed Central

Duncker, Dirk J.; Koller, Akos; Merkus, Daphne; Canty, John M.

2018-01-01

The major factors determining myocardial perfusion and oxygen delivery have been elucidated over the past several decades, and this knowledge has been incorporated into the management of patients with ischemic heart disease (IHD). The basic understanding of the fluid mechanical behavior of coronary stenoses has also been translated to the cardiac catheterization laboratory where measurements of coronary pressure distal to a stenosis and coronary flow are routinely obtained. However, the role of perturbations in coronary microvascular structure and function, due to myocardial hypertrophy or coronary microvascular dysfunction, in IHD is becoming increasingly recognized. Future studies should therefore be aimed at further improving our understanding of the integrated coronary microvascular mechanisms that control coronary blood flow, and of the underlying causes and mechanisms of coronary microvascular dysfunction. This knowledge will be essential to further improve the treatment of patients with IHD. PMID:25475073

Porous Media Approach for Modeling Closed Cell Foam

NASA Technical Reports Server (NTRS)

Ghosn, Louis J.; Sullivan, Roy M.

2006-01-01

In order to minimize boil off of the liquid oxygen and liquid hydrogen and to prevent the formation of ice on its exterior surface, the Space Shuttle External Tank (ET) is insulated using various low-density, closed-cell polymeric foams. Improved analysis methods for these foam materials are needed to predict the foam structural response and to help identify the foam fracture behavior in order to help minimize foam shedding occurrences. This presentation describes a continuum based approach to modeling the foam thermo-mechanical behavior that accounts for the cellular nature of the material and explicitly addresses the effect of the internal cell gas pressure. A porous media approach is implemented in a finite element frame work to model the mechanical behavior of the closed cell foam. The ABAQUS general purpose finite element program is used to simulate the continuum behavior of the foam. The soil mechanics element is implemented to account for the cell internal pressure and its effect on the stress and strain fields. The pressure variation inside the closed cells is calculated using the ideal gas laws. The soil mechanics element is compatible with an orthotropic materials model to capture the different behavior between the rise and in-plane directions of the foam. The porous media approach is applied to model the foam thermal strain and calculate the foam effective coefficient of thermal expansion. The calculated foam coefficients of thermal expansion were able to simulate the measured thermal strain during heat up from cryogenic temperature to room temperature in vacuum. The porous media approach was applied to an insulated substrate with one inch foam and compared to a simple elastic solution without pore pressure. The porous media approach is also applied to model the foam mechanical behavior during subscale laboratory experiments. In this test, a foam layer sprayed on a metal substrate is subjected to a temperature variation while the metal substrate is stretched to simulate the structural response of the tank during operation. The thermal expansion mismatch between the foam and the metal substrate and the thermal gradient in the foam layer causes high tensile stresses near the metal/foam interface that can lead to delamination.

Fibre-matrix bond strength studies of glass, ceramic, and metal matrix composites

NASA Technical Reports Server (NTRS)

Grande, D. H.; Mandell, J. F.; Hong, K. C. C.

1988-01-01

An indentation test technique for compressively loading the ends of individual fibers to produce debonding has been applied to metal, glass, and glass-ceramic matrix composites; bond strength values at debond initiation are calculated using a finite-element model. Results are correlated with composite longitudinal and interlaminar shear behavior for carbon and Nicalon fiber-reinforced glasses and glass-ceramics including the effects of matrix modifications, processing conditions, and high-temperature oxidation embrittlement. The data indicate that significant bonding to improve off-axis and shear properties can be tolerated before the longitudinal behavior becomes brittle. Residual stress and other mechanical bonding effects are important, but improved analyses and multiaxial interfacial failure criteria are needed to adequately interpret bond strength data in terms of composite performance.

Health Benefits of Fasting and Caloric Restriction.

PubMed

Golbidi, Saeid; Daiber, Andreas; Korac, Bato; Li, Huige; Essop, M Faadiel; Laher, Ismail

2017-10-23

Obesity and obesity-related diseases, largely resulting from urbanization and behavioral changes, are now of global importance. Energy restriction, though, is associated with health improvements and increased longevity. We review some important mechanisms related to calorie limitation aimed at controlling of metabolic diseases, particularly diabetes. Calorie restriction triggers a complex series of intricate events, including activation of cellular stress response elements, improved autophagy, modification of apoptosis, and alteration in hormonal balance. Intermittent fasting is not only more acceptable to patients, but it also prevents some of the adverse effects of chronic calorie restriction, especially malnutrition. There are many somatic and potentially psychologic benefits of fasting or intermittent calorie restriction. However, some behavioral modifications related to abstinence of binge eating following a fasting period are crucial in maintaining the desired favorable outcomes.

Variation of mechanical behavior of β-TCP/collagen two phase composite scaffold with mesenchymal stem cell in vitro.

PubMed

Arahira, Takaaki; Todo, Mitsugu

2016-08-01

The primary aim of this study is to characterize the variational behavior of the compressive mechanical property of bioceramic-based scaffolds using stem cells during the cell culture period. β-Tricalcium phosphate (TCP)/collagen two phase composites and β-TCP scaffolds were fabricated using the polyurethane template technique and a subsequent freeze-drying method. Rat bone-marrow mesenchymal stem cells (rMSCs) were then cultured in these scaffolds for up to 28 days. Compression tests of the scaffolds with rMSCs were periodically conducted. Biological properties, such as the cell number, alkaline phosphatase (ALP) activity, and gene expressions of osteogenesis, were evaluated. The microstructural change due to cell growth and the formation of extracellular matrices was examined using a field-emission scanning electron microscope. The compressive property was then correlated with the biological properties and microstructures to understand the mechanism of the variational behavior of the macroscopic mechanical property. The porous collagen structure in the β-TCP scaffold effectively improved the structural stability of the composite scaffold, whereas the β-TCP scaffold exhibited structural instability with the collapse of the porous structure when immersed in a culture medium. The β-TCP/collagen composite scaffold exhibited higher ALP activity and more active generation of osteoblastic markers than the β-TCP scaffold. Copyright © 2016 Elsevier Ltd. All rights reserved.

Breaking bad habits by improving executive function in individuals with obesity.

PubMed

Allom, Vanessa; Mullan, Barbara; Smith, Evelyn; Hay, Phillipa; Raman, Jayanthi

2018-04-16

Two primary factors that contribute to obesity are unhealthy eating and sedentary behavior. These behaviors are particularly difficult to change in the long-term because they are often enacted habitually. Cognitive Remediation Therapy has been modified and applied to the treatment of obesity (CRT-O) with preliminary results of a randomized controlled trial demonstrating significant weight loss and improvements in executive function. The objective of this study was to conduct a secondary data analysis of the CRT-O trial to evaluate whether CRT-O reduces unhealthy habits that contribute to obesity via improvements in executive function. Eighty participants with obesity were randomized to CRT-O or control. Measures of executive function (Wisconsin Card Sort Task and Trail Making Task) and unhealthy eating and sedentary behavior habits were administered at baseline, post-intervention and at 3 month follow-up. Participants receiving CRT-O demonstrated improvements in both measures of executive function and reductions in both unhealthy habit outcomes compared to control. Mediation analyses revealed that change in one element of executive function performance (Wisconsin Card Sort Task perseverance errors) mediated the effect of CRT-O on changes in both habit outcomes. These results suggest that the effectiveness of CRT-O may result from the disruption of unhealthy habits made possible by improvements in executive function. In particular, it appears that cognitive flexibility, as measured by the Wisconsin Card Sort task, is a key mechanism in this process. Improving cognitive flexibility may enable individuals to capitalise on interruptions in unhealthy habits by adjusting their behavior in line with their weight loss goals rather than persisting with an unhealthy choice. The RCT was registered with the Australian New Zealand Registry of Clinical Trials (trial id: ACTRN12613000537752 ).

Differential Histopathological and Behavioral Outcomes Eight Weeks after Rat Spinal Cord Injury by Contusion, Dislocation, and Distraction Mechanisms

PubMed Central

Chen, Kinon; Liu, Jie; Assinck, Peggy; Bhatnagar, Tim; Streijger, Femke; Zhu, Qingan; Dvorak, Marcel F.; Kwon, Brian K.; Tetzlaff, Wolfram

2016-01-01

Abstract The objective of this study was to compare the long-term histological and behavioral outcomes after spinal cord injury (SCI) induced by one of three distinct biomechanical mechanisms: dislocation, contusion, and distraction. Thirty male Sprague-Dawley rats were randomized to incur a traumatic cervical SCI by one of these three clinically relevant mechanisms. The injured cervical spines were surgically stabilized, and motor function was assessed for the following 8 weeks. The spinal cords were then harvested for histologic analysis. Quantification of white matter sparing using Luxol fast blue staining revealed that dislocation injury caused the greatest overall loss of white matter, both laterally and along the rostrocaudal axis of the injured cord. Distraction caused enlarged extracellular spaces and structural alteration in the white matter but spared the most myelinated axons overall. Contusion caused the most severe loss of myelinated axons in the dorsal white matter. Immunohistochemistry for the neuronal marker NeuN combined with Fluoro Nissl revealed that the dislocation mechanism resulted in the greatest neuronal cell losses in both the ventral and dorsal horns. After the distraction injury mechanism, animals displayed no recovery of grip strength over time, in contrast to the animals subjected to contusion or dislocation injuries. After the dislocation injury mechanism, animals displayed no improvement in the grooming test, in contrast to the animals subjected to contusion or distraction injuries. These data indicate that different SCI mechanisms result in distinct patterns of histopathology and behavioral recovery. Understanding this heterogeneity may be important for the future development of therapeutic interventions that target specific neuropathology after SCI. PMID:26671448

Xiao Yao San Improves Depressive-Like Behaviors in Rats with Chronic Immobilization Stress through Modulation of Locus Coeruleus-Norepinephrine System.

PubMed

Ding, Xiu-Fang; Zhao, Xiao-Hua; Tao, Yang; Zhong, Wei-Chao; Fan, Qin; Diao, Jian-Xin; Liu, Yuan-Liang; Chen, Yu-Yao; Chen, Jia-Xu; Lv, Zhi-Ping

2014-01-01

Most research focuses on the hypothalamic-pituitary-adrenal (HPA) axis, hypothalamus-pituitary-thyroid (HPT) axis, and hypothalamus-pituitary-gonadal (HPGA) axis systems of abnormalities of emotions and behaviors induced by stress, while no studies of Chinese herbal medicine such as Xiao Yao San (XYS) on the mechanisms of locus coeruleus-norepinephrine (LC-NE) system have been reported. Therefore, experiments were carried out to observe mechanism of LC-NE system in response to chronic immobilization stress (CIS) and explore the antidepressant effect of XYS. Rat model was established by CIS. LC morphology in rat was conducted. The serum norepinephrine (NE) concentrations and NE biosynthesis such as tyrosine hydroxylase (TH), dopamine-β-hydroxylase (DBH), and corticotrophin-releasing-factor (CRF) in LC were determined. Results showed that there were no discernible alterations in LC in rats. The serum NE concentrations, positive neurons, mean optical density (MOD), and protein levels of TH, DBH, and CRF in model group were significantly increased compared to the control group. But XYS-treated group displayed a significantly decreased in NE levels and expressions of TH, DBH, and CRF compared to the model group. In conclusion, CIS can activate LC-NE system to release NE and then result in a significant decrease in rats. XYS treatment can effectively improve depressive-like behaviors in rats through inhibition of LC-NE neurons activity.

Autism, attachment, and social learning: Three challenges and a way forward.

PubMed

Vivanti, Giacomo; Nuske, Heather J

2017-05-15

We explore three challenges that Autism Spectrum Disorder (ASD) poses to our understanding of the processes underlying early attachment. First, while caregiver-infant attachment and later social-affiliative behavior share common biobehavioral mechanisms, individuals with ASD are able to form secure attachment relationships, despite reduced social-emotional reciprocity and motivation for social interaction. Therefore, disruptions in social affiliation mechanisms can co-exist with secure caregiver-infant bonding. Second, while early attachment quality is associated with later social outcomes in typical development, interventions targeting caregiver-child interaction in ASD often show positive effects on parental responsivity and attachment quality, but not on child social behavior. Therefore, improvements in parent-child bonding do not necessarily result in improvements in social functioning in ASD. Third, individuals with ASD show normative brain activity and selective social affiliative behaviors in response to people that they know but not to unfamiliar people. We propose a conceptual framework to reformulate and address these three theoretical impasses posed by ASD, arguing that the dissociable pathways of child-parent bonding and social development in ASD are shaped by (1) a dissociation between externally-driven and internally-driven attachment responses and (2) atypical learning dynamics occurring during child-caregiver bonding episodes, which are governed by and influence social-affiliation motives and other operant contingencies. Copyright © 2016 Elsevier B.V. All rights reserved.

Xiao Yao San Improves Depressive-Like Behaviors in Rats with Chronic Immobilization Stress through Modulation of Locus Coeruleus-Norepinephrine System

PubMed Central

Ding, Xiu-Fang; Zhao, Xiao-Hua; Tao, Yang; Zhong, Wei-Chao; Fan, Qin; Diao, Jian-Xin; Liu, Yuan-Liang; Chen, Yu-Yao; Chen, Jia-Xu; Lv, Zhi-Ping

2014-01-01

Most research focuses on the hypothalamic-pituitary-adrenal (HPA) axis, hypothalamus-pituitary-thyroid (HPT) axis, and hypothalamus-pituitary-gonadal (HPGA) axis systems of abnormalities of emotions and behaviors induced by stress, while no studies of Chinese herbal medicine such as Xiao Yao San (XYS) on the mechanisms of locus coeruleus-norepinephrine (LC-NE) system have been reported. Therefore, experiments were carried out to observe mechanism of LC-NE system in response to chronic immobilization stress (CIS) and explore the antidepressant effect of XYS. Rat model was established by CIS. LC morphology in rat was conducted. The serum norepinephrine (NE) concentrations and NE biosynthesis such as tyrosine hydroxylase (TH), dopamine-β-hydroxylase (DBH), and corticotrophin-releasing-factor (CRF) in LC were determined. Results showed that there were no discernible alterations in LC in rats. The serum NE concentrations, positive neurons, mean optical density (MOD), and protein levels of TH, DBH, and CRF in model group were significantly increased compared to the control group. But XYS-treated group displayed a significantly decreased in NE levels and expressions of TH, DBH, and CRF compared to the model group. In conclusion, CIS can activate LC-NE system to release NE and then result in a significant decrease in rats. XYS treatment can effectively improve depressive-like behaviors in rats through inhibition of LC-NE neurons activity. PMID:25610478

Wear and friction characteristics of electroless Ni-B-W coatings at different operating temperatures

NASA Astrophysics Data System (ADS)

Mukhopadhyay, Arkadeb; Barman, Tapan Kumar; Sahoo, Prasanta

2018-02-01

Sodium borohydride reduced electroless nickel alloy coatings have high wear resistance and low coefficient of friction. The present work investigates the deposition and tribological behavior of a ternary variant of the borohydride reduced coating i.e. Ni-B-W. Electroless Ni-B-W coatings were deposited on AISI 1040 steel substrates. In order to improve the mechanical properties of the deposits, they were heat treated at 350 °C for 1 h. The coatings in their as-deposited and heat treated conditions were characterized by scanning electron microscope, energy dispersive x-ray analysis and x-ray diffraction techniques. Ni-B-W coatings are amorphous in their as-deposited state while they become crystalline on heat treatment. In fact a high microhardness of Ni-B-W coatings is also observed in as-deposited condition. The microhardness further improves on heat treatment. Tribological behavior of the heat treated coatings with varying load (10-50 N), sliding speed (0.25-0.42 m s-1) and operating temperature (25 °C-500 °C) were evaluated on a pin-on-disc type test setup while the wear mechanisms were also studied. Tribological behavior of Ni-B-W coatings is enhanced at 500 °C operating temperature in comparison with 100 or 300 °C due to formation of protective oxide scales and microstructural changes due to in-situ heat treatment effect.

Recent advances in animal model experimentation in autism research.

PubMed

Tania, Mousumi; Khan, Md Asaduzzaman; Xia, Kun

2014-10-01

Autism, a lifelong neuro-developmental disorder is a uniquely human condition. Animal models are not the perfect tools for the full understanding of human development and behavior, but they can be an important place to start. This review focused on the recent updates of animal model research in autism. We have reviewed the publications over the last three decades, which are related to animal model study in autism. Animal models are important because they allow researchers to study the underlying neurobiology in a way that is not possible in humans. Improving the availability of better animal models will help the field to increase the development of medicines that can relieve disabling symptoms. Results from the therapeutic approaches are encouraging remarkably, since some behavioral alterations could be reversed even when treatment was performed on adult mice. Finding an animal model system with similar behavioral tendencies as humans is thus vital for understanding the brain mechanisms, supporting social motivation and attention, and the manner in which these mechanisms break down in autism. The ongoing studies should therefore increase the understanding of the biological alterations associated with autism as well as the development of knowledge-based treatments therapy for those struggling with autism. In this review, we have presented recent advances in research based on animal models of autism, raising hope for understanding the disease biology for potential therapeutic intervention to improve the quality of life of autism individuals.

Use of multiscale zirconium alloy deformation models in nuclear fuel behavior analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Montgomery, Robert, E-mail: robert.montgomery@pnnl.gov; Tomé, Carlos, E-mail: tome@lanl.gov; Liu, Wenfeng, E-mail: wenfeng.liu@anatech.com

Accurate prediction of cladding mechanical behavior is a key aspect of modeling nuclear fuel behavior, especially for conditions of pellet-cladding interaction (PCI), reactivity-initiated accidents (RIA), and loss of coolant accidents (LOCA). Current approaches to fuel performance modeling rely on empirical constitutive models for cladding creep, growth and plastic deformation, which are limited to the materials and conditions for which the models were developed. To improve upon this approach, a microstructurally-based zirconium alloy mechanical deformation analysis capability is being developed within the United States Department of Energy Consortium for Advanced Simulation of Light Water Reactors (CASL). Specifically, the viscoplastic self-consistent (VPSC)more » polycrystal plasticity modeling approach, developed by Lebensohn and Tomé [1], has been coupled with the BISON engineering scale fuel performance code to represent the mechanistic material processes controlling the deformation behavior of light water reactor (LWR) cladding. A critical component of VPSC is the representation of the crystallographic nature (defect and dislocation movement) and orientation of the grains within the matrix material and the ability to account for the role of texture on deformation. A future goal is for VPSC to obtain information on reaction rate kinetics from atomistic calculations to inform the defect and dislocation behavior models described in VPSC. The multiscale modeling of cladding deformation mechanisms allowed by VPSC far exceed the functionality of typical semi-empirical constitutive models employed in nuclear fuel behavior codes to model irradiation growth and creep, thermal creep, or plasticity. This paper describes the implementation of an interface between VPSC and BISON and provides initial results utilizing the coupled functionality.« less

Assessing the efficacy of imagery-enhanced cognitive behavioral group therapy for social anxiety disorder: Study protocol for a randomized controlled trial.

PubMed

McEvoy, Peter M; Moulds, Michelle L; Grisham, Jessica R; Holmes, Emily A; Moscovitch, David A; Hendrie, Delia; Saulsman, Lisa M; Lipp, Ottmar V; Kane, Robert T; Rapee, Ronald M; Hyett, Matthew P; Erceg-Hurn, David M

2017-09-01

Cognitive behavior group therapy (CBGT) is effective for social anxiety disorder (SAD), but a substantial proportion of patients do not typically achieve normative functioning. Cognitive behavioral models of SAD emphasize negative self-imagery as an important maintaining factor, and evidence suggests that imagery is a powerful cognitive mode for facilitating affective change. This study will compare two group CBGT interventions, one that predominantly uses verbally-based strategies (VB-CBGT) and another that predominantly uses imagery-enhanced strategies (IE-CBGT), in terms of (a) efficacy, (b) mechanisms of change, and (c) cost-effectiveness. This study is a parallel groups (two-arm) single-blind randomized controlled trial. A minimum of 96 patients with SAD will be recruited within a public outpatient community mental health clinic in Perth, Australia. The primary outcomes will be self-reported symptom severity, caseness (SAD present: yes/no) based on a structured diagnostic interview, and clinician-rated severity and life impact. Secondary outcomes and mechanism measures include blind observer-rated use of safety behaviors, physiological activity (heart rate variability and skin conductance level) during a standardized speech task, negative self-beliefs, imagery suppression, fear of negative and positive evaluation, repetitive negative thinking, anxiety, depression, self-consciousness, use of safety behaviors, and the EQ-5D-5L and TiC-P for the health economic analysis. Homework completion, group cohesion, and working alliance will also be monitored. The outcomes of this trial will inform clinicians as to whether integrating imagery-based strategies in cognitive behavior therapy for SAD is likely to improve outcomes. Common and distinct mechanisms of change might be identified, along with relative cost-effectiveness of each intervention. Copyright © 2017 Elsevier Inc. All rights reserved.

Linalool Ameliorates Memory Loss and Behavioral Impairment Induced by REM-Sleep Deprivation through the Serotonergic Pathway.

PubMed

Lee, Bo Kyung; Jung, An Na; Jung, Yi-Sook

2018-07-01

Rapid eye movement (REM) sleep has an essential role in the process of learning and memory in the hippocampus. It has been reported that linalool, a major component of Lavandula angustifolia , has antioxidant, anti-inflammatory, and neuroprotective effects, along with other effects. However, the effect of linalool on the cognitive impairment and behavioral alterations that are induced by REM-sleep deprivation has not yet been elucidated. Several studies have reported that REM-sleep deprivation-induced memory deficits provide a well-known model of behavioral alterations. In the present study, we examined whether linalool elicited an anti-stress effect, reversing the behavioral alterations observed following REM-sleep deprivation in mice. Furthermore, we investigated the underlying mechanism of the effect of linalool. Spatial memory and learning memory were assessed through Y maze and passive avoidance tests, respectively, and the forced swimming test was used to evaluate anti-stress activity. The mechanisms through which linalool improves memory loss and behavioral alterations in sleep-deprived mice appeared to be through an increase in the serotonin levels. Linalool significantly ameliorated the spatial and learning memory deficits, and stress activity observed in sleep-deprived animals. Moreover, linalool led to serotonin release, and cortisol level reduction. Our findings suggest that linalool has beneficial effects on the memory loss and behavioral alterations induced by REM-sleep deprivation through the regulation of serotonin levels.

Enhanced interfacial interaction and antioxidative behavior of novel halloysite nanotubes/silica hybrid supported antioxidant in styrene-butadiene rubber

NASA Astrophysics Data System (ADS)

Lin, Jing; Luo, Yuanfang; Zhong, Bangchao; Hu, Dechao; Jia, Zhixin; Jia, Demin

2018-05-01

A novel antioxidant (HS-s-RT) to improve the mechanical properties and anti-aging performance of styrene-butadiene (SBR) composites was prepared by antioxidant intermediate p-aminodiphenylamine (RT) grafting on the surface of halloysite nanotubes/silica hybrid (HS) via the linkage of silane coupling agent. The analysis of SEM and rubber processing analyzer (RPA) demonstrated HS-s-RT was uniformly dispersed in SBR, and stronger interfacial interaction between HS-s-RT and SBR was formed. Consequently, SBR/HS-s-RT composites have improving mechanical properties. Furthermore, the test of the retention of mechanical properties, Fourier transform infrared spectroscopy with attenuated total reflectance (FTIR-ATR), and oxidation induction time (OIT) showed HS-s-RT can effectively improve the anti-aging effect of SBR composites than corresponding low molecular-weight antioxidant N-isopropyl-N‧-phenyl-4-phenylenediamin (4010NA). Then, the mechanism of thermo-oxidative aging of SBR/HS composites was also investigated, and the superior antioxidative efficiency is attributed to the uniform dispersion and excellent migration resistance of HS-s-RT. Hence, this novel antioxidant might open up new opportunities for the fabrication of high-performance rubber composites due to its superior anti-aging effect and reinforcement.

Improvements in analysis techniques for segmented mirror arrays

NASA Astrophysics Data System (ADS)

Michels, Gregory J.; Genberg, Victor L.; Bisson, Gary R.

2016-08-01

The employment of actively controlled segmented mirror architectures has become increasingly common in the development of current astronomical telescopes. Optomechanical analysis of such hardware presents unique issues compared to that of monolithic mirror designs. The work presented here is a review of current capabilities and improvements in the methodology of the analysis of mechanically induced surface deformation of such systems. The recent improvements include capability to differentiate surface deformation at the array and segment level. This differentiation allowing surface deformation analysis at each individual segment level offers useful insight into the mechanical behavior of the segments that is unavailable by analysis solely at the parent array level. In addition, capability to characterize the full displacement vector deformation of collections of points allows analysis of mechanical disturbance predictions of assembly interfaces relative to other assembly interfaces. This capability, called racking analysis, allows engineers to develop designs for segment-to-segment phasing performance in assembly integration, 0g release, and thermal stability of operation. The performance predicted by racking has the advantage of being comparable to the measurements used in assembly of hardware. Approaches to all of the above issues are presented and demonstrated by example with SigFit, a commercially available tool integrating mechanical analysis with optical analysis.

Microstructural modification of pure Mg for improving mechanical and biocorrosion properties.

PubMed

Ahmadkhaniha, D; Järvenpää, A; Jaskari, M; Sohi, M Heydarzadeh; Zarei-Hanzaki, A; Fedel, M; Deflorian, F; Karjalainen, L P

2016-08-01

In this study, the effect of microstructural modification on mechanical properties and biocorrosion resistance of pure Mg was investigated for tailoring a load-bearing orthopedic biodegradable implant material. This was performed utilizing the friction stir processing (FSP) in 1-3 passes to refine the grain size. Microstructure was examined in an optical microscope and scanning electron microscope with an electron backscatter diffraction unit. X-ray diffraction method was used to identify the texture. Mechanical properties were measured by microhardness and tensile testing. Electrochemical impedance spectroscopy was applied to evaluate corrosion behavior. The results indicate that even applying a single pass of FSP refined the grain size significantly. Increasing the number of FSP passes further refined the structure, increased the mechanical strength and intensified the dominating basal texture. The best combination of mechanical properties and corrosion resistance were achieved after three FSP passes. In this case, the yield strength was about six times higher than that of the as-cast Mg and the corrosion resistance was also improved compared to that in the as-cast condition. Copyright © 2016 Elsevier Ltd. All rights reserved.

Evaluating the effects of the Dietary Guidelines for Americans on consumer behavior and health: methodological challenges.

PubMed

Guthrie, Joanne F; Smallwood, David M

2003-12-01

The Dietary Guidelines for Americans is the official nutrition policy statement for the United States. Government involvement in providing information on private behavior, such as food choice, is justified by the high cost of poor diets, as measured in medical expenses and lost productivity. The Guidelines are intended to provide an up-to-date, consistent information base for federal nutrition education and information efforts and food assistance program regulations. Through these policy mechanisms, the Guidelines are assumed to improve dietary behavior, and, ultimately, health. By law, the Dietary Guidelines for Americans must be updated every five years; however, there is no mandate for evaluation. Evaluation could provide useful information to assess the extent to which the Guidelines positively influence health and provide insights into reasons for their successes and limitations. However, evaluation would also present considerable challenges. This paper discusses the critical data and methodological needs for improving evaluation of the Dietary Guidelines for Americans.

Study on the intelligent decision making of soccer robot side-wall behavior

NASA Astrophysics Data System (ADS)

Zhang, Xiaochuan; Shao, Guifang; Tan, Zhi; Li, Zushu

2007-12-01

Side-wall is the static obstacle in soccer robot game, reasonably making use of the Side-wall can improve soccer robot competitive ability. As a kind of artificial life, the Side-wall processing strategy of soccer robot is influenced by many factors, such as game state, field region, attacking and defending situation and so on, each factor also has different influence degree, so, the Side-wall behavior selection is an intelligent selecting process. From the view point of human simulated, based on the idea of Side-wall processing priority[1], this paper builds the priority function for Side-wall processing, constructs the action predicative model for Side-wall obstacle, puts forward the Side-wall processing strategy, and forms the Side-wall behavior selection mechanism. Through the contrasting experiment between the strategy applied and none, proves that this strategy can improve the soccer robot capacity, it is feasible and effective, and has positive meaning for soccer robot stepped study.

Processing and characterization of polyols plasticized-starch reinforced with microcrystalline cellulose.

PubMed

Rico, M; Rodríguez-Llamazares, S; Barral, L; Bouza, R; Montero, B

2016-09-20

Biocomposites suitable for short-life applications such as food packaging were prepared by melt processing and investigated. Biocomposites studied are wheat starch plasticized with two different molecular weight polyols (glycerol and sorbitol) and reinforced with various amounts of microcrystalline cellulose. The effect of the plasticizer type and the filler amount on the processing properties, the crystallization behavior and morphology developed for the materials, and the influence on thermal stability, dynamic mechanical properties and water absorption behavior were investigated. Addition of microcrystalline cellulose led to composites with good filler-matrix adhesion where the stiffness and resistance to humidity absorption were improved. The use of sorbitol as a plasticizer of starch also improved the stiffness and water uptake behavior of the material as well as its thermal stability. Biodegradable starch-based materials with a wide variety of properties can be tailored by varying the polyol plasticizer type and/or by adding microcrystalline cellulose filler. Copyright © 2016 Elsevier Ltd. All rights reserved.

The Impact of State Behavioral Health Reform on Native American Individuals, Families, and Communities

PubMed Central

Willging, Cathleen E.; Goodkind, Jessica; Lamphere, Louise; Saul, Gwendolyn; Fluder, Shannon; Seanez, Paula

2012-01-01

In 2005, the State of New Mexico undertook a sweeping transformation of all publicly funded behavioral health services. The reform was intended to enhance the cultural responsiveness and appropriateness of these services. To examine achievement of this objective, we conducted a qualitative study of the involvement of Native Americans in reform efforts and the subsequent impacts of reform on services for Native Americans. We found that the reform was relatively unsuccessful at creating mechanisms for genuine community input or improving behavioral health care for this population. These shortcomings were related to limited understandings of administrators concerning how tribal governments and health care systems operate, and the structural limitations of a managed care system that does not allow flexibility for culturally appropriate utilization review, screening, or treatment. However, interaction between the State and tribes increased, and we conclude that aspects of the reform could be strengthened to achieve more meaningful involvement and service improvements. PMID:22427455

Developing Novel Machine Learning Algorithms to Improve Sedentary Assessment for Youth Health Enhancement.

PubMed

Golla, Gowtham Kumar; Carlson, Jordan A; Huan, Jun; Kerr, Jacqueline; Mitchell, Tarrah; Borner, Kelsey

2016-10-01

Sedentary behavior of youth is an important determinant of health. However, better measures are needed to improve understanding of this relationship and the mechanisms at play, as well as to evaluate health promotion interventions. Wearable accelerometers are considered as the standard for assessing physical activity in research, but do not perform well for assessing posture (i.e., sitting vs. standing), a critical component of sedentary behavior. The machine learning algorithms that we propose for assessing sedentary behavior will allow us to re-examine existing accelerometer data to better understand the association between sedentary time and health in various populations. We collected two datasets, a laboratory-controlled dataset and a free-living dataset. We trained machine learning classifiers separately on each dataset and compared performance across datasets. The classifiers predict five postures: sit, stand, sit-stand, stand-sit, and stand\\walk. We compared a manually constructed Hidden Markov model (HMM) with an automated HMM from existing software. The manually constructed HMM gave more F1-Macro score on both datasets.

Studies on the Biotribological and Biological Behavior of Thermally Oxidized Ti6Al4V for Use in Artificial Cervical Disk

NASA Astrophysics Data System (ADS)

Wang, Song; Li, Junhui; Lu, Junzhe; Tyagi, Rajnesh; Liao, Zhenhua; Feng, Pingfa; Liu, Weiqiang

2017-05-01

The artificial cervical disk was simplified and considered as a ball-on-socket model with the material configuration of ultra-high molecular weight polyethylene and Ti6Al4V (PE-on-TC4). In order to improve the wear resistance, an optimized thermal oxidation (TO) coating was applied on TC4 component. The long-term wear behavior of the model was assessed in vitro using a wear simulator under 10 million cycles (MC) testing intervals. The biological behavior was investigated by bone marrow-derived mesenchymal stem cells (BMSCs) cell attachment and cell viability/proliferation assays, respectively. The total average wear rate for PE/TC4 pair was found to be 0.81 mg/MC, whereas the same was about 0.96 mg/MC for PE/TO pair. The wear rate of the metal has been neglected in comparison with that of the mating polymer. PE component was found to suffer severe damage characterized by scratches, fatigue cracks and arc-shaped wear grooves on the edge zone of ball. The dominant wear mechanism was abrasion for metal component while the dominant failure mechanism was a mix of plowing, fatigue and plastic deformation for polymer component. TO coating improved the cell attachment property of TC4, and the cell viability results were also quite good. TO coating protected TC4 from being plowed and avoided the release of toxic metal ions. However, this intensified the wear of PE component. Considering the biotribological and biological behavior in totality, TO coating could still be promising when applied in articulation surfaces.

Lithium ameliorates sleep deprivation-induced mania-like behavior, hypothalamic-pituitary-adrenal (HPA) axis alterations, oxidative stress and elevations of cytokine concentrations in the brain and serum of mice.

PubMed

Valvassori, Samira S; Resende, Wilson R; Dal-Pont, Gustavo; Sangaletti-Pereira, Heron; Gava, Fernanda F; Peterle, Bruna R; Carvalho, André F; Varela, Roger B; Dal-Pizzol, Felipe; Quevedo, João

2017-06-01

The goal of the present study was to investigate the effects of lithium administration on behavior, oxidative stress parameters and cytokine levels in the periphery and brain of mice subjected to an animal model of mania induced by paradoxical sleep deprivation (PSD). Male C57 mice were treated with saline or lithium for 7 days. The sleep deprivation protocol started on the 5th day during for the last 36 hours of the treatment period. Immediately after the sleep deprivation protocol, animals locomotor activity was evaluated and serum and brain samples was extracted to evaluation of corticosterone and adrenocorticotropic hormone circulating levels, oxidative stress parameters and citokynes levels. The results showed that PSD induced hyperactivity in mice, which is considered a mania-like behavior. PSD increased lipid peroxidation and oxidative damage to DNA, as well as causing alterations to antioxidant enzymes in the frontal cortex, hippocampus and serum of mice. In addition, PSD increased the levels of cytokines in the brains of mice. Treatment with lithium prevented the mania-like behavior, oxidative damage and cytokine alterations induced by PSD. Improving our understanding of oxidative damage in biomolecules, antioxidant mechanisms and the inflammatory system - alterations presented in the animal models of mania - is important in helping us to improve our knowledge concerning the pathophysiology of BD, and the mechanisms of action employed by mood stabilizers. © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

The effect of ketogenic diet in an animal model of autism induced by prenatal exposure to valproic acid.

PubMed

Castro, Kamila; Baronio, Diego; Perry, Ingrid Schweigert; Riesgo, Rudimar Dos Santos; Gottfried, Carmem

2017-07-01

Autism spectrum disorder (ASD) is characterized by impairments in social interaction and communication, and by restricted repetitive behaviors and interests. Its etiology is still unknown, but different environmental factors during pregnancy, such as exposure to valproic acid (VPA), are associated with high incidence of ASD in children. In this context, prenatal exposure to VPA in rodents has been used as a reliable model of ASD. Ketogenic diet (KD) is an alternative therapeutic option for refractory epilepsy; however, the effects of this approach in ASD-like behavior need to be evaluated. We conducted a behavioral assessment of the effects of KD in the VPA model of autism. Pregnant animals received a single-intraperitoneal injection of 600 mg/kg VPA, and their offspring were separated into four groups: (1) control group with standard diet (C-SD), (2) control group with ketogenic diet (C-KD), (3) VPA group with standard diet (VPA-SD), and (4) VPA group with ketogenic diet (VPA-KD). When compared with the control group, VPA animals presented increased social impairment, repetitive behavior and higher nociceptive threshold. Interestingly, the VPA group fed with KD presented improvements in social behavior. These mice displayed higher scores in sociability index and social novelty index when compared with the SD-fed VPA mice. VPA mice chronically exposed to a KD presented behavioral improvements; however, the mechanism by which KD improves ASD-like features needs to be further investigated. In conclusion, the present study reinforces the potential use of KD as a treatment for the core deficits of ASD.

Mechanisms of behavior modification in clinical behavioral medicine in China.

PubMed

Yang, Zhiyin; Su, Zhonghua; Ji, Feng; Zhu, Min; Bai, Bo

2014-08-01

Behavior modification, as the core of clinical behavioral medicine, is often used in clinical settings. We seek to summarize behavior modification techniques that are commonly used in clinical practice of behavioral medicine in China and discuss possible biobehavioral mechanisms. We reviewed common behavior modification techniques in clinical settings in China, and we reviewed studies that explored possible biobehavioral mechanisms. Commonly used clinical approaches of behavior modification in China include behavior therapy, cognitive therapy, cognitive-behavioral therapy, health education, behavior management, behavioral relaxation training, stress management intervention, desensitization therapy, biofeedback therapy, and music therapy. These techniques have been applied in the clinical treatment of a variety of diseases, such as chronic diseases, psychosomatic diseases, and psychological disorders. The biobehavioral mechanisms of these techniques involve the autonomic nervous system, neuroendocrine system, neurobiochemistry, and neuroplasticity. Behavior modification techniques are commonly used in the treatment of a variety of somatic and psychological disorders in China. Multiple biobehavioral mechanisms are involved in successful behavior modification.

Mapping the Social World of Classrooms: A Multi-Level, Multi-Reporter Approach to Social Processes and Behavioral Engagement.

PubMed

Kim, Ha Yeon; Cappella, Elise

2016-03-01

Understanding the social context of classrooms has been a central goal of research focused on the promotion of academic development. Building on the current literature on classroom social settings and guided by a risk and protection framework, this study examines the unique and combined contribution of individual relationships and quality of classroom interactions on behavioral engagement among low-income Latino students in kindergarten to fifth grade (N = 111). Findings indicate that individual relationships with teachers and peers and classroom quality, each independently predicted behavioral engagement. Moreover, high-quality classrooms buffered the negative influence of students' difficulties in individual relationships on behavioral engagement. Findings illuminate the need to consider multiple layers of social classroom relationships and interactions and suggest the potential benefit of targeting classroom quality as a mechanism for improving behavioral engagement in urban elementary schools. © Society for Community Research and Action 2016.

Metal Matrix Laminate Tailoring (MMLT) code: User's manual

NASA Technical Reports Server (NTRS)

Murthy, P. L. N.; Morel, M. R.; Saravanos, D. A.

1993-01-01

The User's Manual for the Metal Matrix Laminate Tailoring (MMLT) program is presented. The code is capable of tailoring the fabrication process, constituent characteristics, and laminate parameters (individually or concurrently) for a wide variety of metal matrix composite (MMC) materials, to improve the performance and identify trends or behavior of MMC's under different thermo-mechanical loading conditions. This document is meant to serve as a guide in the use of the MMLT code. Detailed explanations of the composite mechanics and tailoring analysis are beyond the scope of this document, and may be found in the references. MMLT was developed by the Structural Mechanics Branch at NASA Lewis Research Center (LeRC).

Investigation on fracture behavior and mechanisms of DGEBF toughened by CTBN

NASA Astrophysics Data System (ADS)

Wang, Lulu; Tan, Yefa; Wang, Haitao; Gao, Li; Xiao, Chufan

2018-05-01

Carboxyl-terminated butadiene-co-acrylonitrile (CTBN) was used as the toughener to improve the mechanical performance and fracture toughness of diglycidyl ether of bisphenol F (DGEBF) by prereacted approach. The results show that the chemical bonding interface was formed between DGEBF and CTBN particles in the prepolymerization reaction process, which remarkably enhances the fracture toughness of the composites. Based on the qualitative and quantitative analyses, it shows the main toughening mechanisms are the plastic shear banding effect resulted from the plastic deformation of the EP matrix and the plastic void expansion because of the debonding of CTBN particles from the EP matrix.

Interventions to Reduce College Student Drinking: State of the Evidence for Mechanisms of Behavior Change

PubMed Central

Reid, Allecia E.; Carey, Kate B.

2015-01-01

Interventions to reduce college student drinking, although efficacious, generally yield only small effects on behavior change. Examining mechanisms of change may help to improve the magnitude of intervention effects by identifying effective and ineffective active ingredients. Informed by guidelines for establishing mechanisms of change, we conducted a systematic review of alcohol interventions for college students to identify (a) which constructs have been examined and received support as mediators, (b) circumstances that enhance the likelihood of detecting mediation, and (c) the extent of evidence for mechanisms of change. We identified 61 trials that examined 22 potential mediators of intervention efficacy. Descriptive norms consistently mediated normative feedback interventions. Motivation to change consistently failed to mediate motivational interviewing interventions. Multiple active ingredient interventions were not substantially more likely to find evidence of mediation than single ingredient interventions. Delivering intervention content remotely reduced likelihood of finding support for mediation. With the exception of descriptive norms, there is inadequate evidence for the psychosocial constructs purported as mechanisms of change in the college drinking literature. Evidence for mechanisms will be yielded by future studies that map all active ingredients to targeted psychosocial outcomes and that assess potential mediators early, inclusively, and at appropriate intervals following interventions. PMID:26164065

Health-related behavior as a mechanism behind the relationship between neighborhood social capital and individual health - a multilevel analysis

PubMed Central

2012-01-01

Background Although various studies have found a positive association between neighborhood social capital and individual health, the mechanism explaining this direct effect is still unclear. Neighborhood social capital is the access to resources that are generated by relationships between people in a friendly, well-connected and tightly knit neighborhood community. We expect that the resources generated by cohesive neighborhoods support and influence health -improving behaviors in daily life. We identify five different health-related behaviors that are likely to be affected by neighborhood social capital and test these behaviors separately as mediators. Methods The data set pertaining to individual health was taken from the 'health interview' in the 'Second Dutch national survey of general practice' (DNSGP-2, 2002). We combine these individual-level data with data from the 'Dutch housing demand survey' (WBO, 1998 and WoON, 2002) and statistical register information (1995-1999). Per neighborhood 29 WBO respondents, on average, had answered questions regarding social capital in their neighborhood. These variables have been aggregated to the neighborhood level by an ecometric methodology. In the main analysis, in which we tested the mediation, multilevel (ordered) logistic regressions were used to analyze 9253 adults (from the DNSGP-2 data set) from 672 Dutch neighborhoods. In the Netherlands, on average, neighborhoods (4-digit postcodes) comprise 4,000 inhabitants at highly variable population densities. Individual- and neighborhood-level controls have been taken into account in the analyses. Results In neighborhoods with a high level of social capital, people are more physically active and more likely to be non-smokers. These behaviors have positive effects on their health. The direct effect of neighborhood social capital on health is significantly and strongly reduced by physical activity. This study does not support nutrition and sleep habits or moderate alcohol intake as possible explanations of the effects of neighborhoods on health. Conclusions This study is one of the first to test a mechanism explaining much of the direct effect of small-area social capital on individual health. Neighborhood interventions might be most successful at improving health if they stimulate both social interaction and physical activity. PMID:22325740

Person-Environment Fit Theory and Organizations: Commensurate Dimensions, Time Perspectives, and Mechanisms.

ERIC Educational Resources Information Center

Caplan, Robert D.

1987-01-01

Describes person-environment (PE) theory, pertinent studies and experiments in improving PE fit, advocating research on role of past, present, and anticipated PE fit on well-being and employee behavior; outcomes when PE fit is changed by altering P, E, or some combination; and considering the agent of change. Emphasizes systemic properties of…

The Shear Strength and Fracture Behavior of Sn-Ag- xSb Solder Joints with Au/Ni-P/Cu UBM

NASA Astrophysics Data System (ADS)

Lee, Hwa-Teng; Hu, Shuen-Yuan; Hong, Ting-Fu; Chen, Yin-Fa

2008-06-01

This study investigates the effects of Sb addition on the shear strength and fracture behavior of Sn-Ag-based solders with Au/Ni-P/Cu underbump metallization (UBM) substrates. Sn-3Ag- xSb ternary alloy solder joints were prepared by adding 0 wt.% to 10 wt.% Sb to a Sn-3.5Ag alloy and joining them with Au/Ni-P/Cu UBM substrates. The solder joints were isothermally stored at 150°C for up to 625 h to study their microstructure and interfacial reaction with the UBM. Single-lap shear tests were conducted to evaluate the mechanical properties, thermal resistance, and failure behavior. The results show that UBM effectively suppressed intermetallic compound (IMC) formation and growth during isothermal storage. The Sb addition helped to refine the Ag3Sn compounds, further improving the shear strength and thermal resistance of the solders. The fracture behavior evolved from solder mode toward the mixed mode and finally to the IMC mode with increasing added Sb and isothermal storage time. However, SnSb compounds were found in the solder with 10 wt.% Sb; they may cause mechanical degradation of the solder after long-term isothermal storage.

Same pattern, different mechanism: Locking onto the role of key species in seafloor ecosystem process

PubMed Central

Woodin, Sarah Ann; Volkenborn, Nils; Pilditch, Conrad A.; Lohrer, Andrew M.; Wethey, David S.; Hewitt, Judi E.; Thrush, Simon F.

2016-01-01

Seafloor biodiversity is a key mediator of ecosystem functioning, but its role is often excluded from global budgets or simplified to black boxes in models. New techniques allow quantification of the behavior of animals living below the sediment surface and assessment of the ecosystem consequences of complex interactions, yielding a better understanding of the role of seafloor animals in affecting key processes like primary productivity. Combining predictions based on natural history, behavior of key benthic species and environmental context allow assessment of differences in functioning and process, even when the measured ecosystem property in different systems is similar. Data from three sedimentary systems in New Zealand illustrate this. Analysis of the behaviors of the infaunal ecosystem engineers in each system revealed three very different mechanisms driving ecosystem function: density and excretion, sediment turnover and surface rugosity, and hydraulic activities and porewater bioadvection. Integrative metrics of ecosystem function in some cases differentiate among the systems (gross primary production) and in others do not (photosynthetic efficiency). Analyses based on behaviors and activities revealed important ecosystem functional differences and can dramatically improve our ability to model the impact of stressors on ecosystem and global processes. PMID:27230562

Same pattern, different mechanism: Locking onto the role of key species in seafloor ecosystem process.

PubMed

Woodin, Sarah Ann; Volkenborn, Nils; Pilditch, Conrad A; Lohrer, Andrew M; Wethey, David S; Hewitt, Judi E; Thrush, Simon F

2016-05-27

Seafloor biodiversity is a key mediator of ecosystem functioning, but its role is often excluded from global budgets or simplified to black boxes in models. New techniques allow quantification of the behavior of animals living below the sediment surface and assessment of the ecosystem consequences of complex interactions, yielding a better understanding of the role of seafloor animals in affecting key processes like primary productivity. Combining predictions based on natural history, behavior of key benthic species and environmental context allow assessment of differences in functioning and process, even when the measured ecosystem property in different systems is similar. Data from three sedimentary systems in New Zealand illustrate this. Analysis of the behaviors of the infaunal ecosystem engineers in each system revealed three very different mechanisms driving ecosystem function: density and excretion, sediment turnover and surface rugosity, and hydraulic activities and porewater bioadvection. Integrative metrics of ecosystem function in some cases differentiate among the systems (gross primary production) and in others do not (photosynthetic efficiency). Analyses based on behaviors and activities revealed important ecosystem functional differences and can dramatically improve our ability to model the impact of stressors on ecosystem and global processes.

Mechanical properties and ultrastructural characteristics of a glass fiber-reinforced composite.

PubMed

García Barbero, Alvaro Enrique; Vera González, Vicente; García Barbero, Ernesto; Aliaga Vera, Ignacio

2015-06-01

To examine the ultrastructural characteristics of a fiber-reinforced composite (FRC) and its behavior in vitro as a framework for fixed partial dentures (FPDs). A total of 40 specimens were prepared using extracted teeth fixed in methacrylate blocks as supports for the FPD, then the specimens were divided into four groups depending on whether a retaining box was used to fix the FPD to the support teeth, and on whether a composite pontic was assembled on top of the fibers. Fracture testing was performed in a universal testing machine (1 mm/minute). Fracture strength values and failure types were statistically compared for each group. Using retaining boxes did not improve the mechanical behavior of the restorative system. The weakest element of the system was the composite tooth constructed on top of the FRC.

Modified social force model based on information transmission toward crowd evacuation simulation

NASA Astrophysics Data System (ADS)

Han, Yanbin; Liu, Hong

2017-03-01

In this paper, the information transmission mechanism is introduced into the social force model to simulate pedestrian behavior in an emergency, especially when most pedestrians are unfamiliar with the evacuation environment. This modified model includes a collision avoidance strategy and an information transmission model that considers information loss. The former is used to avoid collision among pedestrians in a simulation, whereas the latter mainly describes how pedestrians obtain and choose directions appropriate to them. Simulation results show that pedestrians can obtain the correct moving direction through information transmission mechanism and that the modified model can simulate actual pedestrian behavior during an emergency evacuation. Moreover, we have drawn four conclusions to improve evacuation based on the simulation results; and these conclusions greatly contribute in optimizing a number of efficient emergency evacuation schemes for large public places.

Slurry Erosion Behavior of F6NM Stainless Steel and High-Velocity Oxygen Fuel-Sprayed WC-10Co-4Cr Coating

NASA Astrophysics Data System (ADS)

Cui, S. Y.; Miao, Q.; Liang, W. P.; Huang, B. Z.; Ding, Z.; Chen, B. W.

2017-02-01

WC-10Co-4Cr coating was applied to the surface of F6NM stainless steel by high-velocity oxygen-fuel spraying. The slurry erosion behavior of the matrix and coating was examined at different rotational speeds using a self-made machine. This experiment effectively simulates real slurry erosion in an environment with high silt load. At low velocity (<6 m/s), the main failure mechanism was cavitation. Small bubbles acted as an air cushion, obstructing direct contact between sand and the matrix surface. However, at velocity above 9 m/s, abrasive wear was the dominant failure mechanism. The results indicate that WC-10Co-4Cr coating significantly improved the slurry resistance at higher velocity, because it created a thin and dense WC coating on the surface.

Tensile and Flexural Properties of Cement Composites Reinforced with Flax Nonwoven Fabrics

PubMed Central

Claramunt, Josep; Ventura, Heura; Fernández-Carrasco, Lucía J; Ardanuy, Mònica

2017-01-01

The aim of this study is to develop a process to produce high-performance cement-based composites reinforced with flax nonwoven fabrics, analyzing the influence of the fabric structure—thickness and entanglement—on mechanical behavior under flexural and tensile loadings. For this purpose, composite with flax nonwoven fabrics with different thicknesses were first prepared and their cement infiltration was evaluated with backscattered electron (BSE) images. The nonwoven fabrics with the optimized thickness were then subjected to a water treatment to improve their stability to humid environments and the fiber-matrix adhesion. For a fixed thickness, the effect of the nonwoven entanglement on the mechanical behavior was evaluated under flexural and direct tension tests. The obtained results indicate that the flax nonwoven fabric reinforcement leads to cement composites with substantial enhancement of ductility. PMID:28772573

Overview of the US Fusion Materials Sciences Program

NASA Astrophysics Data System (ADS)

Zinkle, Steven

2004-11-01

The challenging fusion reactor environment (radiation, heat flux, chemical compatibility, thermo-mechanical stresses) requires utilization of advanced materials to fulfill the promise of fusion to provide safe, economical, and environmentally acceptable energy. This presentation reviews recent experimental and modeling highlights on structural materials for fusion energy. The materials requirements for fusion will be compared with other demanding technologies, including high temperature turbine components, proposed Generation IV fission reactors, and the current NASA space fission reactor project to explore the icy moons of Jupiter. A series of high-performance structural materials have been developed by fusion scientists over the past ten years with significantly improved properties compared to earlier materials. Recent advances in the development of high-performance ferritic/martensitic and bainitic steels, nanocomposited oxide dispersion strengthened ferritic steels, high-strength V alloys, improved-ductility Mo alloys, and radiation-resistant SiC composites will be reviewed. Multiscale modeling is providing important insight on radiation damage and plastic deformation mechanisms and fracture mechanics behavior. Electron microscope in-situ straining experiments are uncovering fundamental physical processes controlling deformation in irradiated metals. Fundamental modeling and experimental studies are determining the behavior of transmutant helium in metals, enabling design of materials with improved resistance to void swelling and helium embrittlement. Recent chemical compatibility tests have identified promising new candidates for magnetohydrodynamic insulators in lithium-cooled systems, and have established the basic compatibility of SiC with Pb-Li up to high temperature. Research on advanced joining techniques such as friction stir welding will be described. ITER materials research will be briefly summarized.

Reducing Internalizing Symptoms among High-Risk, Hispanic Adolescents: Mediators of a Preventive Family Intervention

PubMed Central

Perrino, Tatiana; Brincks, Ahnalee; Howe, George; Brown, C. Hendricks; Prado, Guillermo; Pantin, Hilda

2016-01-01

Familias Unidas is a family-focused preventive intervention that has been found to reduce drug use and sexual risk behaviors among Hispanic adolescents. In some trials, Familias Unidas has also been found to be efficacious in reducing adolescent internalizing symptoms (i.e., depressive and anxiety symptoms), even though the intervention did not specifically target internalizing symptoms. This study examines potential mediators or mechanisms by which Familias Unidas influences internalizing symptoms, specifically the role of intervention-targeted improvements in parent-adolescent communication and reductions in youth externalizing behaviors. A total of 213 Hispanic eighth grade students with a history of externalizing behavior problems and their primary caregivers were recruited from the public school system. Participants, with a mean age of 13.8 years, were randomized into the Familias Unidas intervention or community practice control condition, and assessed at baseline, 6-months, 18-months, and 30-months post-baseline. A cascading mediation model was tested in which the Familias Unidas intervention was hypothesized to decrease adolescent internalizing symptoms through two mediators: improvements in parent-adolescent communication leading to decreases in externalizing behaviors. Findings show that the intervention had significant direct effects on youth internalizing symptoms at 30-months post-baseline. In addition, the cascading mediation model was supported in which the Familias Unidas intervention predicted significant improvements in parent-adolescent communication at 6-months, subsequently decreasing externalizing behaviors at 18-months, and ultimately reducing youth internalizing symptoms at 30-months post-baseline. Implications for prevention interventions are discussed. PMID:27154768

Microscopic mechanism for the effect of adding salt on electrospinning by molecular dynamics simulations

NASA Astrophysics Data System (ADS)

Wang, Bing-Bing; Wang, Xiao-Dong; Wang, Tian-Hu

2014-09-01

Adding salts into polymer solution has been found to modulate the fiber structure and significantly improve the solution spinnability in electrospinning. However, the mechanisms have not been fully understood. This work adopted molecular dynamics method to investigate the dynamic behavior of poly(ethylene oxide) (PEO)/water droplet with or without dissolved NaCl salt under high-voltage electric field. Our simulation results agreed with the previous experimental reports well. We observed that some daughter droplets detach from the mother droplet due to the ions evaporation and hydration effect, which significantly accelerates the water evaporation and hence improves the solution spinnability. We also observed that some sodium ions are always coordinated with the ether oxygen group in the PEO chain. When these ions are accelerated by the electric field, the PEO chain segments follow the motion of the ions, inevitably stretching the chain and improving the fiber morphology.

Vitamin D and the omega-3 fatty acids control serotonin synthesis and action, part 2: relevance for ADHD, bipolar disorder, schizophrenia, and impulsive behavior.

PubMed

Patrick, Rhonda P; Ames, Bruce N

2015-06-01

Serotonin regulates a wide variety of brain functions and behaviors. Here, we synthesize previous findings that serotonin regulates executive function, sensory gating, and social behavior and that attention deficit hyperactivity disorder, bipolar disorder, schizophrenia, and impulsive behavior all share in common defects in these functions. It has remained unclear why supplementation with omega-3 fatty acids and vitamin D improve cognitive function and behavior in these brain disorders. Here, we propose mechanisms by which serotonin synthesis, release, and function in the brain are modulated by vitamin D and the 2 marine omega-3 fatty acids, eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA). Brain serotonin is synthesized from tryptophan by tryptophan hydroxylase 2, which is transcriptionally activated by vitamin D hormone. Inadequate levels of vitamin D (∼70% of the population) and omega-3 fatty acids are common, suggesting that brain serotonin synthesis is not optimal. We propose mechanisms by which EPA increases serotonin release from presynaptic neurons by reducing E2 series prostaglandins and DHA influences serotonin receptor action by increasing cell membrane fluidity in postsynaptic neurons. We propose a model whereby insufficient levels of vitamin D, EPA, or DHA, in combination with genetic factors and at key periods during development, would lead to dysfunctional serotonin activation and function and may be one underlying mechanism that contributes to neuropsychiatric disorders and depression. This model suggests that optimizing vitamin D and marine omega-3 fatty acid intake may help prevent and modulate the severity of brain dysfunction. © FASEB.

Preconditioned augmented Lagrangian formulation for nearly incompressible cardiac mechanics.

PubMed

Campos, Joventino Oliveira; Dos Santos, Rodrigo Weber; Sundnes, Joakim; Rocha, Bernardo Martins

2018-04-01

Computational modeling of the heart is a subject of substantial medical and scientific interest, which may contribute to increase the understanding of several phenomena associated with cardiac physiological and pathological states. Modeling the mechanics of the heart have led to considerable insights, but it still represents a complex and a demanding computational problem, especially in a strongly coupled electromechanical setting. Passive cardiac tissue is commonly modeled as hyperelastic and is characterized by quasi-incompressible, orthotropic, and nonlinear material behavior. These factors are known to be very challenging for the numerical solution of the model. The near-incompressibility is known to cause numerical issues such as the well-known locking phenomenon and ill-conditioning of the stiffness matrix. In this work, the augmented Lagrangian method is used to handle the nearly incompressible condition. This approach can potentially improve computational performance by reducing the condition number of the stiffness matrix and thereby improving the convergence of iterative solvers. We also improve the performance of iterative solvers by the use of an algebraic multigrid preconditioner. Numerical results of the augmented Lagrangian method combined with a preconditioned iterative solver for a cardiac mechanics benchmark suite are presented to show its improved performance. Copyright © 2017 John Wiley & Sons, Ltd.

Piano training enhances the neural processing of pitch and improves speech perception in Mandarin-speaking children.

PubMed

Nan, Yun; Liu, Li; Geiser, Eveline; Shu, Hua; Gong, Chen Chen; Dong, Qi; Gabrieli, John D E; Desimone, Robert

2018-06-25

Musical training confers advantages in speech-sound processing, which could play an important role in early childhood education. To understand the mechanisms of this effect, we used event-related potential and behavioral measures in a longitudinal design. Seventy-four Mandarin-speaking children aged 4-5 y old were pseudorandomly assigned to piano training, reading training, or a no-contact control group. Six months of piano training improved behavioral auditory word discrimination in general as well as word discrimination based on vowels compared with the controls. The reading group yielded similar trends. However, the piano group demonstrated unique advantages over the reading and control groups in consonant-based word discrimination and in enhanced positive mismatch responses (pMMRs) to lexical tone and musical pitch changes. The improved word discrimination based on consonants correlated with the enhancements in musical pitch pMMRs among the children in the piano group. In contrast, all three groups improved equally on general cognitive measures, including tests of IQ, working memory, and attention. The results suggest strengthened common sound processing across domains as an important mechanism underlying the benefits of musical training on language processing. In addition, although we failed to find far-transfer effects of musical training to general cognition, the near-transfer effects to speech perception establish the potential for musical training to help children improve their language skills. Piano training was not inferior to reading training on direct tests of language function, and it even seemed superior to reading training in enhancing consonant discrimination.

Mechanical behavior of nanotwinned materials – experimental and computational approaches

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yavas, Hakan

2016-12-17

Nanotwinned materials exhibit high strength combined with excellent thermal stability, making them potentially attractive for numerous applications. When deposited on cold substrates at high rates, for example, silver films can be prepared with a high-density of growth twins with an average twin boundary spacing of less than 10 nm. These films show a very strong {111} texture, with the twin boundaries being perpendicular to the growth direction. The origins of superior mechanical and thermal properties of nanotwinned materials, however, are not yet fully understood and need further improvements.

The Neurobiology of Opiate Motivation

PubMed Central

Ting-A-Kee, Ryan; van der Kooy, Derek

2012-01-01

Opiates are a highly addictive class of drugs that have been reported to possess both dopamine-dependent and dopamine-independent rewarding properties. The search for how, if at all, these distinct mechanisms of motivation are related is of great interest in drug addiction research. Recent electrophysiological, molecular, and behavioral work has greatly improved our understanding of this process. In particular, the signaling properties of GABAA receptors located on GABA neurons in the ventral tegmental area (VTA) appear to be crucial to understanding the interplay between dopamine-dependent and dopamine-independent mechanisms of opiate motivation. PMID:23028134

Rotational fluid flow experiment: WPI/MITRE advanced space design GASCAN 2

NASA Technical Reports Server (NTRS)

Daly, Walter F.; Harr, Lee; Paduano, Rocco; Yee, Tony; Eubbani, Eddy; Delprado, Jaime; Khanna, Ajay

1991-01-01

The design and implementation is examined of an electro-mechanical system for studying vortex behavior in a microgravity environment. Most of the existing equipment was revised and redesigned as necessary. Emphasis was placed on the documentation and integration of the mechanical and electrical subsystems. Project results include the reconfiguration and thorough testing of all the hardware subsystems, the implementation of an infrared gas entrainment detector, new signal processing circuitry for the ultrasonic fluid circulation device, improved prototype interface circuits, and software for overall control of experiment design operation.

Analytical, numerical, and experimental investigations on effective mechanical properties and performances of carbon nanotubes and nanotube based nanocomposites with novel three dimensional nanostructures

NASA Astrophysics Data System (ADS)

Askari, Davood

The theoretical objectives and accomplishment of this work are the analytical and numerical investigation of material properties and mechanical behavior of carbon nanotubes (CNTs) and nanotube nanocomposites when they are subjected to various loading conditions. First, the finite element method is employed to investigate numerically the effective Young's modulus and Poisson's ratio of a single-walled CNT. Next, the effects of chirality on the effective Young's modulus and Poisson's ratio are investigated and then variations of their effective coefficient of thermal expansions and effective thermal conductivities are studied for CNTs with different structural configurations. To study the influence of small vacancy defects on mechanical properties of CNTs, finite element analyses are performed and the behavior of CNTs with various structural configurations having different types of vacancy defects is studied. It is frequently reported that nano-materials are excellent candidates as reinforcements in nanocomposites to change or enhance material properties of polymers and their nanocomposites. Second, the inclusion of nano-materials can considerably improve electrical, thermal, and mechanical properties of the bonding agent, i.e., resin. Note that, materials atomic and molecular level do not usually show isotropic behaviour, rather they have orthotropic properties. Therefore, two-phase and three-phase cylindrically orthotropic composite models consisting of different constituents with orthotropic properties are developed and introduced in this work to analytically predict the effective mechanical properties and mechanical behavior of such structures when they are subjected to various external loading conditions. To verify the analytically obtained exact solutions, finite element analyses of identical cylindrical structures are also performed and then results are compared with those obtained analytically, and excellent agreement is achieved. The third part of this dissertation investigates the growth of vertically aligned, long, and high density arrays of CNTs and novel 3-D carbon nanotube nano-forests. A Chemical vapor deposition technique is used to grow radially aligned CNTs on various types of fibrous materials such as silicon carbide, carbon, Kevlar, and glass fibers and clothes that can be used for the fabrication of multifunctional high performing laminated nanocomposite structures. Using the CNTs nano-forest clothes, nanocomposite samples are prepared and tested giving promising results for the improvement of mechanical properties and performance of composites structures.

Music training and working memory: an ERP study.

PubMed

George, Elyse M; Coch, Donna

2011-04-01

While previous research has suggested that music training is associated with improvements in various cognitive and linguistic skills, the mechanisms mediating or underlying these associations are mostly unknown. Here, we addressed the hypothesis that previous music training is related to improved working memory. Using event-related potentials (ERPs) and a standardized test of working memory, we investigated both neural and behavioral aspects of working memory in college-aged, non-professional musicians and non-musicians. Behaviorally, musicians outperformed non-musicians on standardized subtests of visual, phonological, and executive memory. ERPs were recorded in standard auditory and visual oddball paradigms (participants responded to infrequent deviant stimuli embedded in lists of standard stimuli). Electrophysiologically, musicians demonstrated faster updating of working memory (shorter latency P300s) in both the auditory and visual domains and musicians allocated more neural resources to auditory stimuli (larger amplitude P300), showing increased sensitivity to the auditory standard/deviant difference and less effortful updating of auditory working memory. These findings demonstrate that long-term music training is related to improvements in working memory, in both the auditory and visual domains and in terms of both behavioral and ERP measures. Copyright © 2011 Elsevier Ltd. All rights reserved.

China’s Insurance Regulatory Reform, Corporate Governance Behavior and Insurers’ Governance Effectiveness

PubMed Central

Zhang, Hongliang; Qiu, Aichao

2017-01-01

External regulation is an important mechanism to improve corporate behavior in emerging markets. China’s insurance governance regulation, which began to supervise and guide insurance corporate governance behavior in 2006, has experienced a complex process of reform. This study tested our hypotheses with a sample of 85 firms during 2010–2011, which was obtained by providing a questionnaire to all of China’s shareholding insurance companies. The empirical study results generally show that China’s insurance governance effectiveness has significantly improved through strict regulation. Insurance corporate governance can improve business acumen and risk-control ability, but no significant evidence was found to prove its influence on profitability, as a result of focusing less attention on governance than on management. State ownership is associated with higher corporate governance effectiveness than non-state ownership. Listed companies tend to outperform non-listed firms, and life insurance corporate governance is more effective than that of property insurers. This study not only contributes to the comprehensive understanding of corporate governance effectiveness but also to the literature by highlighting the effect of corporate governance regulation in China’s insurance industry and other emerging economies of the financial sector. PMID:29039781

Acquisition and improvement of human motor skills: Learning through observation and practice

NASA Technical Reports Server (NTRS)

Iba, Wayne

1991-01-01

Skilled movement is an integral part of the human existence. A better understanding of motor skills and their development is a prerequisite to the construction of truly flexible intelligent agents. We present MAEANDER, a computational model of human motor behavior, that uniformly addresses both the acquisition of skills through observation and the improvement of skills through practice. MAEANDER consists of a sensory-effector interface, a memory of movements, and a set of performance and learning mechanisms that let it recognize and generate motor skills. The system initially acquires such skills by observing movements performed by another agent and constructing a concept hierarchy. Given a stored motor skill in memory, MAEANDER will cause an effector to behave appropriately. All learning involves changing the hierarchical memory of skill concepts to more closely correspond to either observed experience or to desired behaviors. We evaluated MAEANDER empirically with respect to how well it acquires and improves both artificial movement types and handwritten script letters from the alphabet. We also evaluate MAEANDER as a psychological model by comparing its behavior to robust phenomena in humans and by considering the richness of the predictions it makes.

Mechanism based approaches for rescuing and enhancing cognition

PubMed Central

Lynch, Gary; Gall, Christine M.

2013-01-01

Progress toward pharmacological means for enhancing memory and cognition has been retarded by the widely discussed failure of behavioral studies in animals to predict human outcomes. As a result, a number of groups have targeted cognition-related neurobiological mechanisms in animal models, with the assumption that these basic processes are highly conserved across mammals. Here we survey one such approach that begins with a form of synaptic plasticity intimately related to memory encoding in animals and likely operative in humans. An initial section will describe a detailed hypothesis concerning the signaling and structural events (a “substrate map”) that convert learning associated patterns of afferent activity into extremely stable increases in fast, excitatory transmission. We next describe results suggesting that all instances of intellectual impairment so far tested in rodent models involve a common endpoint failure in the substrate map. This will be followed by a clinically plausible proposal for obviating the ultimate defect in these models. We then take up the question of whether it is reasonable to expect, from either general principles or a very limited set of experimental results, that enhancing memory will expand the cognitive capabilities of high functioning brains. The final section makes several suggestions about how to improve translation of behavioral results from animals to humans. Collectively, the material covered here points to the following: (1) enhancement, in the sense of rescue, is not an unrealistic possibility for a broad array of neuropsychiatric disorders; (2) serendipity aside, developing means for improving memory in normals will likely require integration of information about mechanisms with new behavioral testing strategies; (3) a shift in emphasis from synapses to networks is a next, logical step in the evolution of the cognition enhancement field. PMID:23966908

Mechanosensitive Channels: Insights from Continuum-Based Simulations

PubMed Central

Tang, Yuye; Yoo, Jejoong; Yethiraj, Arun; Cui, Qiang; Chen, Xi

2009-01-01

Mechanotransduction plays an important role in regulating cell functions and it is an active topic of research in biophysics. Despite recent advances in experimental and numerical techniques, the intrinsic multiscale nature imposes tremendous challenges for revealing the working mechanisms of mechanosensitive channels. Recently, a continuum-mechanics based hierarchical modeling and simulation framework has been established and applied to study the mechanical responses and gating behaviors of a prototypical mechanosensitive channel, the mechanosensitive channel of large conductance (MscL) in bacteria Escherichia coli (E. coli), from which several putative gating mechanisms have been tested and new insights deduced. This article reviews these latest findings using the continuum mechanics framework and suggests possible improvements for future simulation studies. This computationally efficient and versatile continuum-mechanics based protocol is poised to make contributions to the study of a variety of mechanobiology problems. PMID:18787764

Mechanical and degradation property improvement in a biocompatible Mg-Ca-Sr alloy by thermomechanical processing

DOE PAGES

Henderson, Hunter B.; Ramaswamy, Vidhya; Wilson-Heid, Alexander E.; ...

2018-02-03

Magnesium-based alloys have attracted interest as a potential material to comprise biomedical implants that are simultaneously high-strength and temporary, able to provide stabilization before degrading safely and able to be excreted by the human body. Many alloy systems have been evaluated, but this work reports on improved properties through hot extrusion of one promising alloy: Mg-1.0 wt% Ca-0.5 wt%Sr. This alloy has previously demonstrated promising toxicity and degradation properties in the as-cast and rolled conditions. In the current study extrusion causes a dramatic improvement in the mechanical properties in tension and compression, as well as a low in vitro degradationmore » rate. Microstructure (texture, second phase distribution, and grain size), bulk mechanical properties, flow behavior, degradation in simulated body fluid, and effect on osteoblast cyctotoxicity are evaluated and correlated to extrusion temperature. In conclusion, maximum yield strength of 300 MPa (above that of annealed 316 stainless steel) with 10% elongation is observed, making this alloy competitive with existing implant materials.« less

Mechanical and degradation property improvement in a biocompatible Mg-Ca-Sr alloy by thermomechanical processing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Henderson, Hunter B.; Ramaswamy, Vidhya; Wilson-Heid, Alexander E.

Magnesium-based alloys have attracted interest as a potential material to comprise biomedical implants that are simultaneously high-strength and temporary, able to provide stabilization before degrading safely and able to be excreted by the human body. Many alloy systems have been evaluated, but this work reports on improved properties through hot extrusion of one promising alloy: Mg-1.0 wt% Ca-0.5 wt%Sr. This alloy has previously demonstrated promising toxicity and degradation properties in the as-cast and rolled conditions. In the current study extrusion causes a dramatic improvement in the mechanical properties in tension and compression, as well as a low in vitro degradationmore » rate. Microstructure (texture, second phase distribution, and grain size), bulk mechanical properties, flow behavior, degradation in simulated body fluid, and effect on osteoblast cyctotoxicity are evaluated and correlated to extrusion temperature. In conclusion, maximum yield strength of 300 MPa (above that of annealed 316 stainless steel) with 10% elongation is observed, making this alloy competitive with existing implant materials.« less

Mechanical and degradation property improvement in a biocompatible Mg-Ca-Sr alloy by thermomechanical processing.

PubMed

Henderson, Hunter B; Ramaswamy, Vidhya; Wilson-Heid, Alexander E; Kesler, Michael S; Allen, Josephine B; Manuel, Michele V

2018-04-01

Magnesium-based alloys have attracted interest as a potential material to comprise biomedical implants that are simultaneously high-strength and temporary, able to provide stabilization before degrading safely and able to be excreted by the human body. Many alloy systems have been evaluated, but this work reports on improved properties through hot extrusion of one promising alloy: Mg-1.0 wt% Ca-0.5 wt%Sr. This alloy has previously demonstrated promising toxicity and degradation properties in the as-cast and rolled conditions. In the current study extrusion causes a dramatic improvement in the mechanical properties in tension and compression, as well as a low in vitro degradation rate. Microstructure (texture, second phase distribution, and grain size), bulk mechanical properties, flow behavior, degradation in simulated body fluid, and effect on osteoblast cyctotoxicity are evaluated and correlated to extrusion temperature. Maximum yield strength of 300 MPa (above that of annealed 316 stainless steel) with 10% elongation is observed, making this alloy competitive with existing implant materials. Copyright © 2018 The Author(s). Published by Elsevier Ltd.. All rights reserved.

Hybrid networks based on epoxidized camelina oil

PubMed Central

Balanuca, Brindusa; Stan, Raluca; Lungu, Adriana; Vasile, Eugeniu; Iovu, Horia

2017-01-01

Abstract Lately, renewable resources received great attention in the macromolecular compounds area, regarding the design of the monomers and polymers with different applications. In this study the capacity of several modified vegetable oil-based monomers to build competitive hybrid networks was investigate, taking into account thermal and mechanical behavior of the designed materials. In order to synthesize such competitive nanocomposites, the selected renewable raw material, camelina oil, was employed due to the non-toxicity and biodegradability behavior. General properties of epoxidized camelina oil-based materials were improved by loading of different types of organic-inorganic hybrid compounds – polyhedral oligomeric silsesquioxane (POSS) bearing one (POSS1Ep) or eight (POSS8Ep) epoxy rings on the cages. In order to identify the chemical changes occurring after the thermal curing reactions, FT-IR spectrometry was employed. The new synthesized nanocomposites based on epoxidized camelina oil (ECO) were characterized by dynamic mechanical analyze and thermogravimetric analyze. The morphology of the ECO-based materials was investigate by scanning electron microscopy and supplementary information regarding the presence of the POSS compounds were establish by energy dispersive X-ray analysis and X-ray photoelectron spectroscopy. The smooth materials without any separation phase indicates a well dispersion of the Si–O–Si cages within the organic matrix and the incorporation of this hybrid compounds into the ECO network demonstrates to be a well strategy to improve the thermal and mechanical properties, simultaneously. PMID:29491775

The effectiveness of mindfulness-based interventions for supporting people with intellectual disabilities: a narrative review.

PubMed

Harper, Sarah K; Webb, Thomas L; Rayner, Kelly

2013-05-01

A number of studies have used mindfulness-based interventions to influence the behavior of people with intellectual disabilities, to improve their quality of life, and to reduce challenging behavior. The present review critically evaluates 18 studies and assesses the clinical and academic impact of their findings. Strengths identified included replicable methodological approaches, use of multiple baseline designs, strong construct and criterion validity, and consideration of the mechanisms by which mindfulness influences behavior change. Limitations included a lack of randomized controlled trials, inclusion of qualitative data without structured analysis, limited use of statistical analyses, and problems with sampling leading to difficulties generalizing findings. There was also a paucity of research investigating the impact of "Dialectical Behavior Therapy" and "Acceptance and Commitment Therapy" and the role of mindfulness within these approaches. Further research is warranted in this regard.

Shear-thickening behavior of Fe-ZSM5 zeolite slurry and its removal with alumina/boehmites

NASA Astrophysics Data System (ADS)

Liu, Xiao-guang; Li, Yan; Xue, Wen-dong; Sun, Jia-lin; Tang, Qian

2018-06-01

A cryogenic scanning electron microscopy (cryo-SEM) technique was used to explore the shear-thickening behavior of Fe-ZSM5 zeolite pastes and to discover its underlying mechanism. Bare Fe-ZSM5 zeolite samples were found to contain agglomerations, which may break the flow of the pastes and cause shear-thickening behaviors. However, the shear-thickening behaviors can be eliminated by the addition of halloysite and various boehmites because of improved particle packing. Furthermore, compared with pure Fe-ZSM5 zeolite samples and its composite samples with halloysite, the samples with boehmite (Pural SB or Disperal) additions exhibited network structures in their cryo-SEM images; these structures could facilitate the storage and release of flow water, smooth paste flow, and avoid shear-thickening. By contrast, another boehmite (Versal 250) formed agglomerations rather than network structures after being added to the Fe-ZSM5 zeolite paste and resulted in shear-thickening behavior. Consequently, the results suggest that these network structures play key roles in eliminating the shear-thickening behavior.

Spinning our wheels: improving our ability to respond to bullying and cyberbullying.

PubMed

Englander, Elizabeth K

2012-01-01

Bullying is physical and or psychological abuse perpetuated by one powerful child upon another, with the intention to harm or dominate. Bullying and aggression in schools has reached epidemic proportions. Abusive bullying behaviors begin in elementary school, peak during middle school, and begin to subside in high school. Bullying behaviors are associated with catastrophic violence. Cyberbullying has emerged as one result of the increasingly online social life in which modern teens and children engage. Mediation may be inappropriate. The only safety mechanism that children will ultimately retain is the one between their ears.

Chronic behavior evaluation of a micro-machined neural implant with optimized design based on an experimentally derived model.

PubMed

Andrei, Alexandru; Welkenhuysen, Marleen; Ameye, Lieveke; Nuttin, Bart; Eberle, Wolfgang

2011-01-01

Understanding the mechanical interactions between implants and the surrounding tissue is known to have an important role for improving the bio-compatibility of such devices. Using a recently developed model, a particular micro-machined neural implant design aiming the reduction of insertion forces dependence on the insertion speed was optimized. Implantations with 10 and 100 μm/s insertion speeds showed excellent agreement with the predicted behavior. Lesion size, gliosis (GFAP), inflammation (ED1) and neuronal cells density (NeuN) was evaluated after 6 week of chronic implantation showing no insertion speed dependence.

Superelastic carbon spheres under high pressure

NASA Astrophysics Data System (ADS)

Li, Meifen; Guo, Junjie; Xu, Bingshe

2013-03-01

We report a superelastic deformation behavior of carbon spheres by the in situ Raman spectroscopy in a high-pressure diamond anvil cell. The carbon spheres produced by arc discharging in toluene have a mean diameter of 200 nm and an onion-like multilayer graphitic structure. We find that the elastic coefficients, during both the compression and decompression processes, remain a constant up to 10 GPa, indicating a superior high-pressure structural stability. Such superelastic behavior is related to the isotropic and concentric configuration of carbon spheres and provides additional insight into improving the microscopic mechanical properties of small-scale particles.

Precipitation Strengthenable NiTiPd High Temperature Shape Memory Alloys

NASA Technical Reports Server (NTRS)

Bigelow, Glen; Garg, Anita; Benafan, Othmane; Noebe, Ronald; Gaydosh, Darrell; Padula, Santo, II

2017-01-01

In binary NiTi alloys, it has long been known that Ni-rich alloys can be heat treated to produce precipitates which both strengthen the matrix against dislocations and improve the behavior of the material under thermal and mechanical cycling. Within recent years, the same effect has been observed in Ni-rich NiTiHf high temperature shape memory alloys and heat treatment regimens have been defined which will reliably produce improved properties. In NiTiPd alloys, precipitation has also been observed, but studies are still underway to define reliable heat treatments and compositions which will provide a balance of strengthening and good thermomechanical properties. For this study, a series of NiTi-32 at.Pd alloys was produced to determine the effect of changing nickeltitanium content on the transformation behavior and heat treatability of the material. Samples were aged at temperatures between 350C and 450C for times up to 100 hours. Actuation type behavior was evaluated using uniaxial constant force thermal cycling (UCFTC) to determine the effect of composition and aging on the material behavior. TEMSEM was used to evaluate the microstructure and determine the types of precipitates formed. The correlation between composition, heat treat, microstructure, and thermomechanical behavior will be addressed and discussed.

Mindfulness Meditation for Fibromyalgia: Mechanistic and Clinical Considerations.

PubMed

Adler-Neal, Adrienne L; Zeidan, Fadel

2017-09-01

Fibromyalgia is a disorder characterized by widespread pain and a spectrum of psychological comorbidities, rendering treatment difficult and often a financial burden. Fibromyalgia is a complicated chronic pain condition that requires a multimodal therapeutic approach to optimize treatment efficacy. Thus, it has been postulated that mind-body techniques may prove fruitful in treating fibromyalgia. Mindfulness meditation, a behavioral technique premised on non-reactive sensory awareness, attenuates pain and improves mental health outcomes. However, the impact of mindfulness meditation on fibromyalgia-related outcomes has not been comprehensively characterized. The present review delineates the existing evidence supporting the effectiveness and hypothesized mechanisms of mindfulness meditation in treating fibromyalgia-related outcomes. Mindfulness-based interventions premised on cultivating acceptance, non-attachment, and social engagement may be most effective in decreasing fibromyalgia-related pain and psychological symptoms. Mindfulness-based therapies may alleviate fibromyalgia-related outcomes through multiple neural, psychological, and physiological processes. Mindfulness meditation may provide an effective complementary treatment approach for fibromyalgia patients, especially when combined with other reliable techniques (exercise; cognitive behavioral therapy). However, characterizing the specific analgesic mechanisms supporting mindfulness meditation is a critical step to fostering the clinical validity of this technique. Identification of the specific analgesic mechanisms supporting mindfulness-based pain relief could be utilized to better design behavioral interventions to specifically target fibromyalgia-related outcomes.

Fishing Technique of Long-Fingered Bats Was Developed from a Primary Reaction to Disappearing Target Stimuli.

PubMed

Aizpurua, Ostaizka; Alberdi, Antton; Aihartza, Joxerra; Garin, Inazio

2016-01-01

Behavioral plasticity is a key feature allowing animals to broaden their dietary niche when novel food resources become available, and long-fingered bats provide an appropriate model system to study the underpinnings of behavioral plasticity, since although generally being an insectivorous species, some individuals have been reported to catch fish. Aiming to get insight into the origin of fishing behavior in long-fingered bats, we studied in the field the differences in sensorial and mechanical reactions to insect-like (stationary) and fish-like (temporary) prey stimuli between well-known piscivorous and strictly insectivorous individuals. Both piscivorous and insectivorous individuals exhibited a qualitatively similar reaction to temporary target stimuli (longer and deeper dips and terminal echolocation phase skewed towards buzz I compared to stationary stimuli). Nevertheless, the quantitative differences observed in the sensorial and mechanical features (the intensity of the shift was significantly greater in piscivorous than in insectivorous individuals) show that piscivorous individuals have honed their capture technique likely enhancing the fishing success. Thus, our results suggest that the fishing technique was developed from a primary reaction shared by all long-fingered bats. All individuals seem to be mechanically and sensorially adapted to detect and capture fish, although under appropriate environmental conditions, they would further improve their technique by experience and/or social learning.

Synthesis and mechanical behavior of β-tricalcium phosphate/titania composites addressed to regeneration of long bone segments.

PubMed

Sprio, Simone; Guicciardi, Stefano; Dapporto, Massimiliano; Melandri, Cesare; Tampieri, Anna

2013-01-01

Bioactive tricalcium phosphate/titania ceramic composites were synthesized by pressureless air sintering of mixed hydroxyapatite and titania (TiO2) powders. The sintering process was optimized to achieve dense ceramic bodies consisting in a bioactive/bioresorbable matrix (β-tricalcium phosphate) reinforced with defined amounts of sub-micron sized titania particles. Extensive chemico-physical and mechanical characterization was carried out on the resulting composites, which displayed values of flexural strength, fracture toughness and elastic modulus in the range or above the typical ranges of values manifested by human cortical bone. It was shown that titania particles provided a toughening effect to the calcium-phosphate matrix and a reinforcement in fracture strength, in comparison with sintered hydroxyapatite bodies characterized by similar relative density. The characteristics of the resulting composites, i.e. bioactivity/bioresorbability and ability of manifesting biomimetic mechanical behavior, are features that can promote processes of bone regeneration in load-bearing sites. Hence, in the perspective of developing porous bone scaffolds with high bioactivity and improved biomechanical behavior, TCP/TiO2 composites with controlled composition can be considered as very promising biomaterials for application in a field of orthopedics where no acceptable clinical solutions still exist. Copyright © 2012 Elsevier Ltd. All rights reserved.

Behavioral addictions in addiction medicine: from mechanisms to practical considerations.

PubMed

Banz, Barbara C; Yip, Sarah W; Yau, Yvonne H C; Potenza, Marc N

2016-01-01

Recent progress has been made in our understanding of nonsubstance or "behavioral" addictions, although these conditions and their most appropriate classification remain debated and the knowledge basis for understanding the pathophysiology of and treatments for these conditions includes important gaps. Recent developments include the classification of gambling disorder as a "Substance-Related and Addictive Disorder" in the 5th edition of the Diagnostic and Statistical Manual of Mental Disorders (DSM-5) and proposed diagnostic criteria for Internet Gaming Disorder in Section 3 of DSM-5. This chapter reviews current neuroscientific understandings of behavioral addictions and the potential of neurobiological data to assist in the development of improved policy, prevention, and treatment efforts. © 2016 Elsevier B.V. All rights reserved.

Astaxanthin ameliorates aluminum chloride-induced spatial memory impairment and neuronal oxidative stress in mice.

PubMed

Al-Amin, Md Mamun; Reza, Hasan Mahmud; Saadi, Hasan Mahmud; Mahmud, Waich; Ibrahim, Abdirahman Adam; Alam, Musrura Mefta; Kabir, Nadia; Saifullah, A R M; Tropa, Sarjana Tarannum; Quddus, A H M Ruhul

2016-04-15

Aluminum chloride induces neurodegenerative disease in animal model. Evidence suggests that aluminum intake results in the activation of glial cells and generation of reactive oxygen species. By contrast, astaxanthin is an antioxidant having potential neuroprotective activity. In this study, we investigate the effect of astaxanthin on aluminum chloride-exposed behavioral brain function and neuronal oxidative stress (OS). Male Swiss albino mice (4 months old) were divided into 4 groups: (i) control (distilled water), (ii) aluminum chloride, (iii) astaxanthin+aluminum chloride, and (iv) astaxanthin. Two behavioral tests; radial arm maze and open field test were conducted, and OS markers were assayed from the brain and liver tissues following 42 days of treatment. Aluminum exposed group showed a significant reduction in spatial memory performance and anxiety-like behavior. Moreover, aluminum group exhibited a marked deterioration of oxidative markers; lipid peroxidation (MDA), nitric oxide (NO), glutathione (GSH) and advanced oxidation of protein products (AOPP) in the brain. To the contrary, co-administration of astaxanthin and aluminum has shown improved spatial memory, locomotor activity, and OS. These results indicate that astaxanthin improves aluminum-induced impaired memory performances presumably by the reduction of OS in the distinct brain regions. We suggest a future study to determine the underlying mechanism of astaxanthin in improving aluminum-exposed behavioral deficits. Copyright © 2016 Elsevier B.V. All rights reserved.

Environmental Enrichment Improves Behavior, Cognition, and Brain Functional Markers in Young Senescence-Accelerated Prone Mice (SAMP8).

PubMed

Griñan-Ferré, Christian; Pérez-Cáceres, David; Gutiérrez-Zetina, Sofía Martínez; Camins, Antoni; Palomera-Avalos, Verónica; Ortuño-Sahagún, Daniel; Rodrigo, M Teresa; Pallàs, M

2016-05-01

The environment in which organisms live can greatly influence their development. Consequently, environmental enrichment (EE) is progressively recognized as an important component in the improvement of brain function and development. It has been demonstrated that rodents raised under EE conditions exhibit favorable neuroanatomical effects that improve their learning, spatial memory, and behavioral performance. Here, by using senescence-accelerated prone mice (SAMP8) and these as a model of adverse genetic conditions for brain development, we determined the effect of EE by raising these mice during early life under favorable conditions. We found a better generalized performance of SAMP8 under EE in the results of four behavioral and learning tests. In addition, we demonstrated broad molecular correlation in the hippocampus by an increase in NeuN and Ki67 expression, as well as an increase in the expression of neurotrophic factors, such as pleiotrophin (PTN) and brain-derived neurotrophic factor (BDNF), with a parallel decrease in neurodegenerative markers such as GSK3, amyloid-beta precursor protein, and phosphorylated beta-catenin, and a reduction of SBDP120, Bax, GFAP, and interleukin-6 (IL-6), resulting in a neuroprotective panorama. Globally, it can be concluded that EE applied to SAMP8 at young ages resulted in epigenetic regulatory mechanisms that give rise to significant beneficial effects at the molecular, cellular, and behavioral levels during brain development, particularly in the hippocampus.

Ion plated gold films: Properties, tribological behavior and performance

NASA Technical Reports Server (NTRS)

Spalvins, Talivaldis

1987-01-01

The glow discharge energizing favorably modifies and controls the coating/substrate adherence and the nucleation and growth sequence of ion plated gold films. As a result the adherence, coherence, internal stresses, and morphology of the films are significantly improved. Gold ion plated films because of their graded coating/substrate interface and fine uniform densely packed microstructure not only improve the tribological properties but also induce a surface strengthening effect which improves the mechanical properties such as yield, tensile, and fatigue strength. Consequently significant improvements in the tribological performance of ion plated gold films as compared to vapor deposited gold films are shown in terms of decreased friction/wear and prolonged endurance life.

Choline acetyltransferase and TrkA expression, as well as the improvement in cognition produced by E2 and P4 in ovariectomized rats, are blocked by ICI 182 780 and RU486.

PubMed

Espinosa-Raya, Judith; Cruz-Raya, Ulises; López-Martínez, Margarita; Picazo, Ofir

2018-01-09

Treatment with 17-β estradiol and progesterone improves the performance of ovariectomized rats in an autoshaping learning task, representing cognitive improvement. To test whether this is attributable to genomic mechanisms, the antiestrogen ICI 182 780 or antiprogesterone RU486 was injected into ovariectomized animals primed previously with estrogen or progesterone, respectively. Compared with the vehicle control, each hormone administered alone produced an elevated expression of choline acetyltransferase and TrkA, along with an improvement in performance on the behavioral test. E2+ICI reverted the increase in these two proteins. However, RU alone elicited higher ChAT expression. With this exception, there was a clear linear regression between the number of conditioned responses and the level of ChAT and TrkA in the basal forebrain. The results suggest that TrkA may be more important than ChAT for regulating autoshaping learning tasks, and that genomic mechanisms in the basal forebrain could possibly underlie hormonal improvement of cognition.

Influences of die channel angles on microstructures and wear behaviors of AZ61 wrought magnesium alloy fabricated by extrusion-shear process

NASA Astrophysics Data System (ADS)

Hu, Hong-J.; Sun, Z.; Ou, Z.-W.

2016-12-01

Extrusion-shear (ES) process for magnesium alloy is a newly developed plastic deformation process, and ES process combines direct extrusion and two steps of ECAE (equal channel angular extrusion). To investigate the effects of the die channel angles on the microstructures and wear behaviors of AZ61 wrought magnesium alloy, the samples used in this study were fabricated by ES process with different die channel angles (120° and 135°). The microstructures of the samples were characterized by optical microscopy (OM), X-ray diffraction (XRD) and (SEM). The cumulative strains in the ES process were predicted by approaches of numerical simulation and theoretical calculation. To characterize the wear resistance of the samples, pin-on-disk tests under dry sliding conditions with various normal loads and reciprocating frequencies were conducted. To define the wear mechanisms of AZ61 magnesium alloy, the worn surfaces after wear tests were analyzed by SEM and energy-dispersive X-ray spectrometer (EDS). Based on the results obtained, die channel angles have significant influences on the grain refinements and wear behaviors of the samples. Decreasing channel angles of the ES die will not only refine the microstructures of magnesium alloys effectively and improve their harnesses, but also improve their wear resistance as decreasing channel angles results in higher friction coefficients and wear rates. With the increase in applied loads and frequencies, wear mechanisms change from mild wear (adhesion, abrasion and oxidation) to severe wear (delamination, plastic deformation and melting). In summary, the wear resistance of ES-processed AZ61 magnesium alloy could be improved by decreasing channel angles of ES dies.

Study on the Microstructure, Mechanical Properties and Corrosion Behavior of Mg-Zn-Ca Alloy Wire for Biomaterial Application

NASA Astrophysics Data System (ADS)

Zheng, Maobo; Xu, Guangquan; Liu, Debao; Zhao, Yue; Ning, Baoqun; Chen, Minfang

2018-03-01

Due to their excellent biocompatibility and biodegradability, magnesium alloy wires have attracted much attention for biomaterial applications including orthopedic K-wires and sutures in wound closure. In this study, Mg-3Zn-0.2Ca alloy wires were prepared by cold drawing combined with proper intermediate annealing process. Microstructures, texture, mechanical properties and corrosion behavior of Mg-3Zn-0.2Ca alloy wire in a simulated body fluid were investigated. The results showed that the secondary phase and average grain size of the Mg-3Zn-0.2Ca alloy were refined in comparison with the as-extruded alloy and a strong (0002)<10-10>//DD basal fiber texture system was formed after multi-pass cold drawing. After the annealing, most of the basal planes were tilted to the drawing direction (DD) by about 35°, presenting the characteristics of random texture, and the texture intensity decreased. The as-annealed wire shows good mechanical properties with the ultimate tensile strength (UTS), yield strength (YS) and elongation of 253 ± 8.5 MPa, 212 ± 11.3 MPa and 9.2 ± 0.9%, respectively. Electrochemical and hydrogen evolution measurements showed that the corrosion resistance of the Mg-3Zn-0.2Ca alloy wire was improved after the annealing. The immersion test indicated that the Mg-3Zn-0.2Ca wire exhibited uniform corrosion behavior during the initial period of immersion, but then exhibited local corrosion behavior.

Principles and management of neuropsychiatric symptoms in Alzheimer's dementia.

PubMed

Nowrangi, Milap A; Lyketsos, Constantine G; Rosenberg, Paul B

2015-01-29

Neuropsychiatric symptoms of Alzheimer's disease (NPS-AD) are highly prevalent and lead to poor medical and functional outcomes. In spite of the burdensome nature of NPS-AD, we are continuing to refine the nosology and only beginning to understand the underlying pathophysiology. Cluster analyses have frequently identified three to five subsyndromes of NPS-AD: behavioral dysfunction (for example, agitation/aggressiveness), psychosis (for example, delusions and hallucinations), and mood disturbance (for example, depression or apathy). Recent neurobiological studies have used new neuroimaging techniques to elucidate behaviorally relevant circuits and networks associated with these subsyndromes. Several fronto-subcortical circuits, cortico-cortical networks, and neurotransmitter systems have been proposed as regions and mechanisms underlying NPS-AD. Common to most of these subsyndromes is the broad overlap of regions associated with the salience network (anterior cingulate and insula), mood regulation (amygdala), and motivated behavior (frontal cortex). Treatment strategies for dysregulated mood syndromes (depression and apathy) have primarily targeted serotonergic mechanisms with antidepressants or dopaminergic mechanisms with psychostimulants. Psychotic symptoms have largely been targeted with anti-psychotic medications despite controversial risk/benefit tradeoffs. Management of behavioral dyscontrol, including agitation and aggression in AD, has encompassed a wide range of psychoactive medications as well as non-pharmacological approaches. Developing rational therapeutic approaches for NPS-AD will require a firmer understanding of the underlying etiology in order to improve nosology as well as provide the empirical evidence necessary to overcome regulatory and funding challenges to further study these debilitating symptoms.

The extinction of morphine-induced conditioned place preference by histone deacetylase inhibition.

PubMed

Wang, Ru; Zhang, Yan; Qing, Hua; Liu, Mei; Yang, Peng

2010-10-11

Recent evidence suggests that epigenetic mechanisms have an important role in the development of addictive behavior. However, little is known about the role of epigenetic mechanisms in the extinction of morphine-induced behavioral changes. In this study, we will examine the effect of histone deacetylase (HDAC) inhibitors on extinction of morphine-induced conditioned place preference (CPP). To facilitate extinction, rats will be administered an HDAC inhibitor (HDACi) following nonreinforced exposure to the conditioned context. To measure persistence, rats were subject to a reinstatement test using 3 mg/kg dose of morphine. To exclude the effect of repeated NaBut injections themselves on morphine-CPP in the absence of extinction session, rats received injection of either NaBut or vehicle for 8 days. We found that HDAC inhibition during nonconfined extinction or confined extinction consolidation can facilitate extinction of morphine-induced CPP. We also showed that the extinction of drug seeking via HDAC inhibition modulates extinction learning such that reinstatement behavior is significantly attenuated. There is no effect of repeated NaBut injections themselves on morphine-CPP in the absence of extinction session. In conclusion, our results extend earlier reports on the ability of HDACi to modify the behavioral effects of drugs of abuse. Our increasing understanding of these epigenetic mechanisms will provide key answers to basic processes in drug addiction and hopefully provide insight into designing improved treatments for drug addiction. Copyright 2010 Elsevier Ireland Ltd. All rights reserved.

Beat Keeping in a Sea Lion As Coupled Oscillation: Implications for Comparative Understanding of Human Rhythm.

PubMed

Rouse, Andrew A; Cook, Peter F; Large, Edward W; Reichmuth, Colleen

2016-01-01

Human capacity for entraining movement to external rhythms-i.e., beat keeping-is ubiquitous, but its evolutionary history and neural underpinnings remain a mystery. Recent findings of entrainment to simple and complex rhythms in non-human animals pave the way for a novel comparative approach to assess the origins and mechanisms of rhythmic behavior. The most reliable non-human beat keeper to date is a California sea lion, Ronan, who was trained to match head movements to isochronous repeating stimuli and showed spontaneous generalization of this ability to novel tempos and to the complex rhythms of music. Does Ronan's performance rely on the same neural mechanisms as human rhythmic behavior? In the current study, we presented Ronan with simple rhythmic stimuli at novel tempos. On some trials, we introduced "perturbations," altering either tempo or phase in the middle of a presentation. Ronan quickly adjusted her behavior following all perturbations, recovering her consistent phase and tempo relationships to the stimulus within a few beats. Ronan's performance was consistent with predictions of mathematical models describing coupled oscillation: a model relying solely on phase coupling strongly matched her behavior, and the model was further improved with the addition of period coupling. These findings are the clearest evidence yet for parity in human and non-human beat keeping and support the view that the human ability to perceive and move in time to rhythm may be rooted in broadly conserved neural mechanisms.

High-Power Diode Laser-Treated 13Cr4Ni Stainless Steel for Hydro Turbines

NASA Astrophysics Data System (ADS)

Mann, B. S.

2014-06-01

The cast martensitic chromium nickel stainless steels such as 13Cr4Ni, 16Cr5Ni, and 17Cr4Ni PH have found wide application in hydro turbines. These steels have adequate corrosion resistance with good mechanical properties because of chromium content of more than 12%. The 13Cr4Ni stainless steel is most widely used among these steels; however, lacks silt, cavitation, and water impingement erosion resistances (SER, CER, and WIER). This article deals with characterizing 13Cr4Ni stainless steel for silt, cavitation, and water impingement erosion; and studying its improved SER, CER, and WIER behavior after high-power diode laser (HPDL) surface treatment. The WIER and CER have improved significantly after laser treatment, whereas there is a marginal improvement in SER. The main reason for improved WIER and CER is due to its increased surface hardness and formation of fine-grained microstructure after HPDL surface treatment. CER and WIER of HPDL-treated 13Cr4Ni stainless steel samples have been evaluated as per ASTM G32-2003 and ASTM G73-1978, respectively; and these were correlated with microstructure and mechanical properties such as ultimate tensile strength, modified ultimate resilience, and microhardness. The erosion damage mechanism, compared on the basis of scanning electron micrographs and mechanical properties, is discussed and reported in this article.

CBT Specific Process in Exposure-Based Treatments: Initial Examination in a Pediatric OCD Sample

PubMed Central

Benito, Kristen Grabill; Conelea, Christine; Garcia, Abbe M.; Freeman, Jennifer B.

2012-01-01

Cognitive-Behavioral theory and empirical support suggest that optimal activation of fear is a critical component for successful exposure treatment. Using this theory, we developed coding methodology for measuring CBT-specific process during exposure. We piloted this methodology in a sample of young children (N = 18) who previously received CBT as part of a randomized controlled trial. Results supported the preliminary reliability and predictive validity of coding variables with 12 week and 3 month treatment outcome data, generally showing results consistent with CBT theory. However, given our limited and restricted sample, additional testing is warranted. Measurement of CBT-specific process using this methodology may have implications for understanding mechanism of change in exposure-based treatments and for improving dissemination efforts through identification of therapist behaviors associated with improved outcome. PMID:22523609

The effects of psychoeducation and self-monitoring in a cognitive-behavioral program for body-image improvement.

PubMed

Cash, Thomas F; Hrabosky, Joshua I

2003-01-01

Cognitive-behavioral therapy (CBT) is an efficacious treatment for body-image difficulties and disorders. The current study evaluated two combined components of Cash's (1997) self-administered body-image CBT program--psychoeducation and self-monitoring. Twenty-five body-dissatisfied college students enrolled in the three-week program and were required to hand in homework weekly in brief meetings with the experimenter. From pre- to posttest, participants became significantly more satisfied with their appearance and reported less situational body-image dysphoria, less weight-related concern, and less investment in their appearance as a source of self-evaluation. Changes generalized to improved self-esteem, eating attitudes, and social anxiety. Better self-monitoring compliance predicted greater reductions in body-image dysphoria. The study's methodological limitations and clinical implications are considered, and mechanisms of change are discussed.

Shock Tube Measurements for Liquid Fuels Combustion

DTIC Science & Technology

2006-06-01

UNCLASSIFIED Defense Technical Information Center Compilation Part Notice ADP023631 TITLE: Shock Tube Measurements for Liquid Fuels Combustion ... COMBUSTION ARO Contract Number DAAD 19-01-1-0597 Principal Investigator: Ronald K. Hanson Mechanical Engineering Department Stanford University, Stanford CA...94305-3032 SUMMARY/OVERVIEW: We report results of basic research aimed at improving knowledge of the combustion behavior of diesel and jet-related

Mind, brain, and teaching: Some directions for future research.

PubMed

Pasquinelli, Elena; Zalla, Tiziana; Gvodzic, Katarina; Potier-Watkins, Cassandra; Piazza, Manuela

2015-01-01

In line with Kline's taxonomy, highlighting teaching as an array of behaviors with different cognitive underpinnings, we advocate the expansion of a specific line of research on mind, brain, and teaching. This research program is devoted to the understanding of the neurocognitive mechanisms and the evolutionary determinants of teaching skills, with the ultimate goal of helping teachers improve teaching quality.

Core-shell chromium silicide-silicon nanopillars: a contact material for future nanosystems.

PubMed

Chang, Mu-Tung; Chen, Chih-Yen; Chou, Li-Jen; Chen, Lih-Juann

2009-11-24

Chromium silicide nanostructures are fabricated inside silicon nanopillars grown by the vapor-liquid-solid mechanism. The remarkable field-emission behavior of these nanostructures results from extensive improvement of carrier transport due to the reduced energy barrier between the metal and semiconductor layers. The results warrant consideration of chromium silicide as a potentially important contact material in future nanosystems.

Mechanical Properties and Wear Behavior of AA5182/WC Nanocomposite Fabricated by Friction Stir Welding at Different Tool Traverse Speeds

NASA Astrophysics Data System (ADS)

Paidar, Moslem; Asgari, Ali; Ojo, Olatunji Oladimeji; Saberi, Abbas

2018-03-01

Grain growth inhibition at the heat-affected zone, improved weld strength and superior tribological properties of welds are desirable attributes of modern manufacturing. With the focused on these attributes, tungsten carbide (WC) nanoparticles were employed as reinforcements for the friction stir welding of 5-mm-thick AA5182 aluminum alloy by varying tool traverse speeds. The microstructure, microhardness, ultimate tensile strength, fracture and wear behavior of the resultant WC-reinforced welds were investigated, while unreinforced AA5182 welds were employed as controls for the study. The result shows that the addition of WC nanoparticles causes substantial grain refinement within the weld nugget. A decrease in traverse speed caused additional particle fragmentation, improved hardness value and enhanced weld strength in the reinforced welds. Improved wear rate and friction coefficient of welds were attained at a reduced traverse speed of 100 mm/min in the WC-reinforced welds. This improvement is attributed to the effects of reduced grain size/grain fragmentation and homogeneous dispersion of WC nanoparticles within the WC-reinforced weld nugget.

Music training and inhibitory control: a multidimensional model.

PubMed

Moreno, Sylvain; Farzan, Faranak

2015-03-01

Training programs aimed to improve cognitive skills have either yielded mixed results or remain to be validated. The limited benefits of such regimens are largely attributable to weak understanding of (1) how (and which) interventions provide the most cognitive improvements; and (2) how brain networks and neural mechanisms that underlie specific cognitive abilities can be modified selectively. Studies indicate that music training leads to robust and long-lasting benefits to behavior. Importantly, behavioral advantages conferred by music extend beyond perceptual abilities to even nonauditory functions, such as inhibitory control (IC) and its neural correlates. Alternative forms of arts engagement or brain training do not appear to yield such enhancements, which suggests that music uniquely taps into brain networks subserving a variety of auditory as well as domain-general mechanisms such as IC. To account for such widespread benefits of music training, we propose a framework of transfer effects characterized by three dimensions: level of processing, nature of the transfer, and involvement of executive functions. We suggest that transfer of skills is mediated through modulation of general cognitive processes, in particular IC. We believe that this model offers a viable framework to test the extent and limitations of music-related changes. © 2014 New York Academy of Sciences.

Microstructural and Morphological Factors Affecting Uncertainty in Small Scale Mechanical Properties

NASA Astrophysics Data System (ADS)

Maughan, Michael R.

If materials are to be developed from the ground up, the process will be dependent upon accurate and well-defined models of material behavior. These models can be closed-form solutions developed from first principles, simulations, or empirically derived equations, among others. Material behavior at the mesoscale is in general well understood, having had several centuries of study. However, behavior at the micro or nanoscale still requires characterization. Understanding the collective influence of the microstructure on the bulk material, for example with models like the Hall-Petch relation, has advanced our ability to manipulate the material to our advantage. We now have the ability to study not only the structure of the material, but also the material behavior and properties at the nanoscale. Understanding this behavior is critical to developing a framework for interpreting and utilizing these properties in materials design. This research aims to improve the fundamental understanding of the mechanical performance of materials and the subsequent variation in measured properties. The literature reports widely varying material properties such as hardness, elastic modulus, and yield point when measured at the nanoscale. Proposed variation mechanisms in these properties include surface preparation, error in measurement, heterogeneous dislocation density and distribution, crystal orientation, surface oxide film fracture, and others. Among other things, this work shows that these sources of variation can be determined and quantified, and that this information can be utilized as a characterization and/or predictive tool. The main goals of this work are to 1) continue basic research on sources of variation in the nanoscale properties of materials, specifically hardness and modulus in crystalline and glassy solids, 2) study the abrupt transition from elastic to plastic material behavior known as pop-in and resolve the problem of pseudo-elastic behavior prior to plasticity, and 3) integrate the sources of and propagate the variation into materials simulations, 4) study the influence of dislocation processes on indentation size effects, and 5) apply this learning to difficult to measure or interpret materials applications.

The effects of interventions targeting multiple health behaviors on smoking cessation outcomes: a rapid realist review protocol.

PubMed

Minian, Nadia; deRuiter, Wayne K; Lingam, Mathangee; Corrin, Tricia; Dragonetti, Rosa; Manson, Heather; Taylor, Valerie H; Zawertailo, Laurie; Ebnahmady, Arezoo; Melamed, Osnat C; Rodak, Terri; Hahn, Margaret; Selby, Peter

2018-03-01

Health behaviors directly impact the health of individuals, and populations. Since individuals tend to engage in multiple unhealthy behaviors such as smoking, excessive alcohol use, physical inactivity, and eating an unhealthy diet simultaneously, many large community-based interventions have been implemented to reduce the burden of disease through the modification of multiple health behaviors. Smoking cessation can be particularly challenging as the odds of becoming dependent on nicotine increase with every unhealthy behavior a smoker exhibits. This paper presents a protocol for a rapid realist review which aims to identify factors associated with effectively changing tobacco use and target two or more additional unhealthy behaviors. An electronic literature search will be conducted using the following bibliographic databases: MEDLINE, Embase, PsycINFO, Cumulative Index to Nursing and Allied Health Literature (CINAHL), The Cochrane Library, Social Science Abstracts, Social Work Abstracts, and Web of Science. Two reviewers will screen titles and abstracts for relevant research, and the selected full papers will be used to extract data and assess the quality of evidence. Throughout this process, the rapid realist approach proposed by Saul et al., 2013 will be used to refine our initial program theory and identify contextual factors and mechanisms that are associated with successful multiple health behavior change. This review will provide evidence-based research on the context and mechanisms that may drive the success or failure of interventions designed to support multiple health behavior change. This information will be used to guide curriculum and program development for a government funded project on improving smoking cessation by addressing multiple health behaviors in people in Canada. PROSPERO CRD42017064430.

A conceptual model of patient-professional communication as a self-management skill: A latent growth change modeling.

PubMed

Chan, Sam C C; Chan, Chetwyn C H; Siu, Andrew M H; Poon, Peter K K

2015-10-01

Patient Communication with healthcare professionals is an integral self-management skill. Yet the underlying mechanisms explaining how such communication might be enhanced across time have not been well studied. Based on the transtheoretical model, the study aimed to develop an across-time Attitude-Social Influence-Efficacy model in order to explain changes in participants' patient-professional communication behaviors in the Chronic Disease Self-management Program (CDSMP). Readiness-to-change construct was hypothesized to be the overall predictors of psychological and behavioral parameters. It was hypothesized that social norm and attitude toward behaviors would be the indirect predictors of communication behavior. One hundred and thirty-six Chinese participants with chronic diseases underwent a 6-week CDSMP. Their attitude toward behavior, self-efficacy, social norm, readiness to change and communication behavior were obtained at 1st, 4th and 6th week of the structured program. A modified latent growth change curve model yielded satisfactory model fit (χ(2)/df = 1.32; RMSEA = 0.063 (90% CI = 0.018-0.96)). The results showed that readiness to change had a positive influence on attitude and self-efficacy. Both attitude and social norm positively affected self-efficacy. Attitude and self-efficacy in turn positively influenced communication behavior at the beginning of the program. Across 6 weeks, self-efficacy imposed a negative influence on communication behavior while social norm exerted a positive influence on the behavior. This study revealed possible underlying mechanisms influencing CDSMP participants' communication with professionals. The results could shed light on further improvement of the structured program. Copyright © 2015 Elsevier Inc. All rights reserved.

Behavior of an improved Zr fuel cladding with oxidation resistant coating under loss-of-coolant accident conditions

NASA Astrophysics Data System (ADS)

Park, Dong Jun; Kim, Hyun Gil; Jung, Yang Il; Park, Jung Hwan; Yang, Jae Ho; Koo, Yang Hyun

2016-12-01

This study investigates protective coatings for improving the high temperature oxidation resistance of Zr fuel claddings for light water nuclear reactors. FeCrAl alloy and Cr layers were deposited onto Zr plates and tubes using cold spraying. For the FeCrAl/Zr system, a Mo layer was introduced between the FeCrAl coating and the Zr matrix to prevent inter-diffusion at high temperatures. Both the FeCrAl and Cr coatings improved the oxidation resistance compared to that of the uncoated Zr alloy when exposed to a steam environment at 1200 °C. The ballooning behavior and mechanical properties of the coated cladding samples were studied under simulated loss-of-coolant accident conditions. The coated samples showed higher burst temperatures, lower circumferential strain, and smaller rupture openings compared to the uncoated Zr. Although 4-point bend tests of the coated samples showed a small increase in the maximum load, ring compression tests of a sectioned sample showed increased ductility.

Mediators in the Randomized Trial of Child- and Family-Focused Cognitive-Behavioral Therapy for Pediatric Bipolar Disorder

PubMed Central

MacPherson, Heather A.; Weinstein, Sally M.; Henry, David B.; West, Amy E.

2016-01-01

Mediation analyses can identify mechanisms of change in Cognitive-Behavioral Therapy (CBT). However, few studies have analyzed mediators of CBT for youth internalizing disorders; only one trial evaluated treatment mechanisms for youth with mixed mood diagnoses. This study evaluated mediators in the randomized trial of Child- and Family-Focused CBT (CFF-CBT) versus Treatment As Usual (TAU) for pediatric bipolar disorder (PBD), adjunctive to pharmacotherapy. Sixty-nine children ages 7-13 with PBD were randomly assigned to CFF-CBT or TAU. Primary outcomes (child mood, functioning) and candidate mediators (family functioning, parent/child coping) were assessed at baseline and 4-, 8-, 12- (post-treatment), and 39-weeks (follow-up). Compared with TAU, children receiving CFF-CBT exhibited greater improvement in mania, depression, and global functioning. Several parent and family factors significantly improved in response to CFF-CBT versus TAU, and were associated with the CFF-CBT treatment effect. Specifically, parenting skills and coping, family flexibility, and family positive reframing showed promise as mediators of child mood symptoms and global functioning. Main or mediating effects for youth coping were not significant. CFF-CBT may impact children’s mood and functioning by improving parenting skills and coping, family flexibility, and family positive reframing. Findings highlight the importance of parent coping and family functioning in the treatment of PBD. PMID:27567973

Application of Mobile Technology for Improving Expanded Program on Immunization Among Highland Minority and Stateless Populations in Northern Thailand Border

PubMed Central

Apidechkul, Tawatchai; Jandee, Kasemsak; Khamsiriwatchara, Amnat; Lawpoolsri, Saranath; Sawang, Surasak; Sangvichean, Aumnuyphan; Wansatid, Peerawat; Krongrungroj, Sarinya

2015-01-01

Background Studies of undervaccinated children of minority/stateless populations have highlighted significant barriers at individual, community, and state levels. These include geography-related difficulties, poverty, and social norms/beliefs. Objective The objective of this study was to assess project outcomes regarding immunization coverage, as well as maternal attitudes and practices toward immunization. Methods The “StatelessVac” project was conducted in Thailand-Myanmar-Laos border areas using cell phone-based mechanisms to increase immunization coverage by incorporating phone-to-phone information sharing for both identification and prevention. With limitation of the study among vulnerable populations in low-resource settings, the pre/post assessments without comparison group were conducted. Immunization coverage was collected from routine monthly reports while behavior-change outcomes were from repeat surveys. Results This study revealed potential benefits of the initiative for case identification; immunization coverage showed an improved trend. Prevention strategies were successfully integrated into the routine health care workflows of immunization activities at point-of-care. A behavior-change-communication package contributes significantly in raising both concern and awareness in relation to child care. Conclusions The mobile technology has proven to be an effective mechanism in improving a children’s immunization program among these hard-to-reach populations. Part of the intervention has now been revised for use at health centers across the country. PMID:25589367

Do unto others or treat yourself? The effects of prosocial and self-focused behavior on psychological flourishing.

PubMed

Nelson, S Katherine; Layous, Kristin; Cole, Steven W; Lyubomirsky, Sonja

2016-09-01

When it comes to the pursuit of happiness, popular culture encourages a focus on oneself. By contrast, substantial evidence suggests that what consistently makes people happy is focusing prosocially on others. In the current study, we contrasted the mood- and well-being-boosting effects of prosocial behavior (i.e., doing acts of kindness for others or for the world) and self-oriented behavior (i.e., doing acts of kindness for oneself) in a 6-week longitudinal experiment. Across a diverse sample of participants (N = 473), we found that the 2 types of prosocial behavior led to greater increases in psychological flourishing than did self-focused and neutral behavior. In addition, we provide evidence for mechanisms explaining the relative improvements in flourishing among those prompted to do acts of kindness-namely, increases in positive emotions and decreases in negative emotions. Those assigned to engage in self-focused behavior did not report improved psychological flourishing, positive emotions, or negative emotions relative to controls. The results of this study contribute to a growing literature supporting the benefits of prosocial behavior and challenge the popular perception that focusing on oneself is an optimal strategy to boost one's mood. People striving for happiness may be tempted to treat themselves. Our results, however, suggest that they may be more successful if they opt to treat someone else instead. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

Cerebral mGluR5 availability contributes to elevated sleep need and behavioral adjustment after sleep deprivation

PubMed Central

Hefti, Katharina; Saberi-Moghadam, Sohrab; Buck, Alfred; Ametamey, Simon M; Scheidegger, Milan; Franken, Paul; Henning, Anke; Seifritz, Erich

2017-01-01

Increased sleep time and intensity quantified as low-frequency brain electrical activity after sleep loss demonstrate that sleep need is homeostatically regulated, yet the underlying molecular mechanisms remain elusive. We here demonstrate that metabotropic glutamate receptors of subtype 5 (mGluR5) contribute to the molecular machinery governing sleep-wake homeostasis. Using positron emission tomography, magnetic resonance spectroscopy, and electroencephalography in humans, we find that increased mGluR5 availability after sleep loss tightly correlates with behavioral and electroencephalographic biomarkers of elevated sleep need. These changes are associated with altered cortical myo-inositol and glycine levels, suggesting sleep loss-induced modifications downstream of mGluR5 signaling. Knock-out mice without functional mGluR5 exhibit severe dysregulation of sleep-wake homeostasis, including lack of recovery sleep and impaired behavioral adjustment to a novel task after sleep deprivation. The data suggest that mGluR5 contribute to the brain's coping mechanisms with sleep deprivation and point to a novel target to improve disturbed wakefulness and sleep. PMID:28980941

Effect of Annealing Treatments on the Microstructure, Mechanical Properties and Corrosion Behavior of Direct Metal Laser Sintered Ti-6Al-4V

NASA Astrophysics Data System (ADS)

Xu, Yangzi; Lu, Yuan; Sundberg, Kristin L.; Liang, Jianyu; Sisson, Richard D.

2017-05-01

An experimental investigation on the effects of post-annealing treatments on the microstructure, mechanical properties and corrosion behavior of direct metal laser sintered Ti-6Al-4V alloys has been conducted. The microstructure and phase evolution as affected by annealing treatment temperature were examined through scanning electron microscopy and x-ray diffraction. The tensile properties and Vickers hardness were measured and compared to the commercial Grade 5 Ti-6Al-4V alloy. Corrosion behavior of the parts was analyzed electrochemically in simulated body fluid at 37 °C. It was found out that the as-printed parts mainly composed of non-equilibrium α' phase. Annealing treatment allowed the transformation from α' to α phase and the development of β phase. The tensile test results indicated that post-annealing treatment could improve the ductility and decrease the strength. The as-printed Ti-6Al-4V part exhibits inferior corrosion resistance compared to the commercial alloy, and post-annealing treatment can reduce its susceptibility to corrosion by reducing the two-phase interface area.

The informativity of sound modulates crossmodal facilitation of visual discrimination: a fMRI study.

PubMed

Li, Qi; Yu, Hongtao; Li, Xiujun; Sun, Hongzan; Yang, Jingjing; Li, Chunlin

2017-01-18

Many studies have investigated behavioral crossmodal facilitation when a visual stimulus is accompanied by a concurrent task-irrelevant sound. Lippert and colleagues reported that a concurrent task-irrelevant sound reduced the uncertainty of the timing of the visual display and improved perceptional responses (informative sound). However, the neural mechanism by which the informativity of sound affected crossmodal facilitation of visual discrimination remained unclear. In this study, we used event-related functional MRI to investigate the neural mechanisms underlying the role of informativity of sound in crossmodal facilitation of visual discrimination. Significantly faster reaction times were observed when there was an informative relationship between auditory and visual stimuli. The functional MRI results showed sound informativity-induced activation enhancement including the left fusiform gyrus and the right lateral occipital complex. Further correlation analysis showed that the right lateral occipital complex was significantly correlated with the behavioral benefit in reaction times. This suggests that this region was modulated by the informative relationship within audiovisual stimuli that was learnt during the experiment, resulting in late-stage multisensory integration and enhanced behavioral responses.

Striatum-medial prefrontal cortex connectivity predicts developmental changes in reinforcement learning.

PubMed

van den Bos, Wouter; Cohen, Michael X; Kahnt, Thorsten; Crone, Eveline A

2012-06-01

During development, children improve in learning from feedback to adapt their behavior. However, it is still unclear which neural mechanisms might underlie these developmental changes. In the current study, we used a reinforcement learning model to investigate neurodevelopmental changes in the representation and processing of learning signals. Sixty-seven healthy volunteers between ages 8 and 22 (children: 8-11 years, adolescents: 13-16 years, and adults: 18-22 years) performed a probabilistic learning task while in a magnetic resonance imaging scanner. The behavioral data demonstrated age differences in learning parameters with a stronger impact of negative feedback on expected value in children. Imaging data revealed that the neural representation of prediction errors was similar across age groups, but functional connectivity between the ventral striatum and the medial prefrontal cortex changed as a function of age. Furthermore, the connectivity strength predicted the tendency to alter expectations after receiving negative feedback. These findings suggest that the underlying mechanisms of developmental changes in learning are not related to differences in the neural representation of learning signals per se but rather in how learning signals are used to guide behavior and expectations.

Connecting prosocial behavior to improved physical health: Contributions from the neurobiology of parenting.

PubMed

Brown, Stephanie L; Brown, R Michael

2015-08-01

Although a growing body of evidence suggests that giving to (helping) others is linked reliably to better health and longevity for the helper, little is known about causal mechanisms. In the present paper we use a recently developed model of caregiving motivation to identify possible neurophysiological mechanisms. The model describes a mammalian neurohormonal system that evolved to regulate maternal care, but over time may have been recruited to support a wide variety of helping behaviors in humans and other social animals. According to the model, perception of need or distress in others activates caregiving motivation, which in turn, can facilitate helping behavior. Motivational regulation is governed by the medial preoptic area of the hypothalamus, interacting with certain other brain regions, hormones, and neuromodulators (especially oxytocin and progesterone). Consideration of neurohormonal circuitry and related evidence raises the possibility that it is these hormones, known to have stress-buffering and restorative properties, that are responsible, at least in part, for health and longevity benefits associated with helping others. Copyright © 2015 Elsevier Ltd. All rights reserved.

Cerebral mGluR5 availability contributes to elevated sleep need and behavioral adjustment after sleep deprivation.

PubMed

Holst, Sebastian C; Sousek, Alexandra; Hefti, Katharina; Saberi-Moghadam, Sohrab; Buck, Alfred; Ametamey, Simon M; Scheidegger, Milan; Franken, Paul; Henning, Anke; Seifritz, Erich; Tafti, Mehdi; Landolt, Hans-Peter

2017-10-05

Increased sleep time and intensity quantified as low-frequency brain electrical activity after sleep loss demonstrate that sleep need is homeostatically regulated, yet the underlying molecular mechanisms remain elusive. We here demonstrate that metabotropic glutamate receptors of subtype 5 (mGluR5) contribute to the molecular machinery governing sleep-wake homeostasis. Using positron emission tomography, magnetic resonance spectroscopy, and electroencephalography in humans, we find that increased mGluR5 availability after sleep loss tightly correlates with behavioral and electroencephalographic biomarkers of elevated sleep need. These changes are associated with altered cortical myo-inositol and glycine levels, suggesting sleep loss-induced modifications downstream of mGluR5 signaling. Knock-out mice without functional mGluR5 exhibit severe dysregulation of sleep-wake homeostasis, including lack of recovery sleep and impaired behavioral adjustment to a novel task after sleep deprivation. The data suggest that mGluR5 contribute to the brain's coping mechanisms with sleep deprivation and point to a novel target to improve disturbed wakefulness and sleep.

Baicalin Modulates APPL2/Glucocorticoid Receptor Signaling Cascade, Promotes Neurogenesis, and Attenuates Emotional and Olfactory Dysfunctions in Chronic Corticosterone-Induced Depression.

PubMed

Gao, Chong; Du, Qiaohui; Li, Wenting; Deng, Ruixia; Wang, Qi; Xu, Aimin; Shen, Jiangang

2018-04-19

Olfactory dysfunction is often accompanied with anxiety- and depressive-like behaviors in depressive patients. Impaired neurogenesis in hippocampus and subventricular zone (SVZ)-olfactory bulb (OB) contribute to anxiety- and depressive-like behaviors and olfactory dysfunctions. However, the underlying mechanisms of olfactory dysfunction remain unclear. Our previous study indicates that adaptor protein, phosphotyrosine interacting with PH domain and leucine zipper 2 (APPL2), could affect the activity and sensitivity of glucocorticoid receptor (GR) and mediate impaired hippocampal neurogenesis, which contribute the development of depression. In the present study, we further identified the roles of APPL2 in olfactory functions. APPL2 Tg mice displayed higher GR activity and less capacity of neurogenesis at olfactory system with less olfactory sensitivity than WT mice, indicating that APPL2 could be a potential therapeutic target for depression and olfactory deficits. We then studied the effects of baicalin, a medicinal herbal compound, on modulating APPL2/GR signaling pathway for promoting neurogenesis and antidepressant as well as improving olfactory functions. Baicalin treatment inhibited APPL2/GR signaling pathway and improved neurogenesis at SVZ, OB, and hippocampus in APPL2 Tg mice and chronic corticosterone-induced depression mouse model. Behavioral tests revealed that baicalin attenuated depressive- and anxiety-like behaviors and improve olfactory functions in the chronic depression mouse model and APPL2 Tg mice. Taken together, APPL2 could be a novel therapeutic target for improving depressant-related olfactory dysfunctions and baicalin could inhibit APPL2-mediated GR hyperactivity and promote adult neurogenesis, subsequently releasing depressive and anxiety symptoms and improving olfactory functions for antidepressant therapy.

Development of Biodegradable Poly(citrate)-Polyhedral Oligomeric Silsesquioxanes Hybrid Elastomers with High Mechanical Properties and Osteogenic Differentiation Activity.

PubMed

Du, Yuzhang; Yu, Meng; Chen, Xiaofeng; Ma, Peter X; Lei, Bo

2016-02-10

Biodegradable elastomeric biomaterials have attracted much attention in tissue engineering due to their biomimetic viscoelastic behavior and biocompatibility. However, the low mechanical stability at hydrated state, fast biodegradation in vivo, and poor osteogenic activity greatly limited bioelastomers applications in bone tissue regeneration. Herein, we develop a series of poly(octanediol citrate)-polyhedral oligomeric silsesquioxanes (POC-POSS) hybrids with highly tunable elastomeric behavior (hydrated state) and biodegradation and osteoblasts biocompatibility through a facile one-pot thermal polymerization strategy. POC-POSS hybrids show significantly improved stiffness and ductility in either dry or hydrated conditions, as well as good antibiodegradation ability (20-50% weight loss in 3 months). POC-POSS hybrids exhibit significantly enhanced osteogenic differentiation through upregulating alkaline phosphatase (ALP) activity, calcium deposition, and expression of osteogenic markers (ALPL, BGLAP, and Runx2). The high mechanical stability at hydrated state and enhanced osteogenic activity make POC-POSS hybrid elastomers promising as scaffolds and nanoscale vehicles for bone tissue regeneration and drug delivery. This study may also provide a new strategy (controlling the stiffness under hydrated condition) to design advanced hybrid biomaterials with high mechanical properties under physiological condition for tissue regeneration applications.

Processing, thermal and mechanical behaviour of PEI/MWCNT/carbon fiber nanostructured laminate

NASA Astrophysics Data System (ADS)

Santos, L. F. P.; Ribeiro, B.; Hein, L. R. O.; Botelho, E. C.; Costa, M. L.

2017-11-01

In this work, nanostructured composites of polyetherimide (PEI) with addition of functionalized multiwall carbon nanotube (MWCNT) were processed via solution mixing. After processing, these nanocomposites were evaluated by thermogravimetry (TGA), dynamic-mechanical analysis (DMA), scanning electron microscopy (SEM) and atomic force microscopy (AFM). Subsequently, the nanocomposite was processed with carbon fibers by using hot compression molding. In order to evaluate interlaminar fracture strength, the processed laminates were mechanically evaluated by interlaminar shear strength (ILSS) and compression shear test (CST). Also, the Weibull distribution was employed to help in the statistical treatment of the data obtained from the mechanical tests. With regards to the fracture of the specimens, optical microscopy was used for the evaluation of the material. The addition of 1 wt% of MWCNT in the polymer matrix increased both thermal stability and viscoelastic behavior of the material. These improvements positively impacted the mechanical properties, generating a 16% and 58% increase in the short-beam strength and apparent interlaminar shear, respectively. In addition, it can be verified from morphological analysis of the fracture a change in the failure mode of the laminate by the incorporation of MWCNT. This behavior can be proven from CST test where there was no presence of the shear force by compression.

Tensile properties of polyhydroxyalkanoate/polycaprolactone blends studied by rheo-optical near-infrared (NIR) spectroscopy

NASA Astrophysics Data System (ADS)

Nishida, Masahiro; Ogura, Takashi; Shinzawa, Hideyuki; Nishida, Masakazu; Kanematsu, Wataru

2016-11-01

In order to improve the mechanical properties of Polyhydroxyalkanoate (PHA), the polycaprolactone (PCL) pellet was blended with a PHA-based pellet. The effects of the mixing ratio on the tensile properties, Young's modulus, tensile strength and elongation at break, were examined using a universal testing machine. When the mixing ration of PCL increased to 50%, the elongation at break of the polymer blend increased and the gauge area of tensile test specimens whitened and became porous. In order to understand this behavior, a rheo-optical characterization technique based on near-infrared (NIR) spectroscopy was applied to the mechanical deformation of the polymer blends during static tensile tests. Two-dimensional (2D) correlation of NIR spectra was then examined. It was found from peaks of ethyl group or methyl group that PCL was preferentially deformed. The difference in the deformation behavior is thought to be the cause of the porous structure.

Strain hardening and fracture behavior during tension of directionally solidified high-nitrogen austenitic steel

NASA Astrophysics Data System (ADS)

Maier, Galina; Astafurova, Elena; Melnikov, Eugene; Moskvina, Valentina; Galchenko, Nina

2017-12-01

The effect of grain orientation relative to tensile load on the strain hardening behavior and fracture mechanism of directionally solidified high-nitrogen steel Fe-20Cr-22Mn-1.5V-0.2C-0.6N (in wt %) was studied. The tensile samples oriented along the longitudinal direction of columnar grains demonstrated the improved mechanical properties compared to specimens with the transversal directions of columnar grains: the values of tensile strength and strain-to-fracture were as high as 1080 MPa and 22%, respectively, for tension along the columnar grains and 870 MPa and 11%, respectively, for the tension transversal to the columnar grains. The change in the grain orientation relative to the tensile load varies a fracture mode of the steel. The fraction of the transgranular fracture was higher in the samples with longitudinal directions of the columnar grains compared to the transversal ones.

Investigation of 1-Dimensional ultrasonic vibration compliance mechanism based on finite element analysis

NASA Astrophysics Data System (ADS)

Latif, A. Afiff; Ibrahim, M. Rasidi; Rahim, E. A.; Cheng, K.

2017-04-01

The conventional milling has many difficulties in the processing of hard and brittle material. Hence, ultrasonic vibration assisted milling (UVAM) was proposed to overcome this problem. The objective of this research is to study the behavior of compliance mechanism (CM) as the critical part affect the performance of the UVAM. The design of the CM was investigated and focuses on 1-Dimensional. Experimental result was obtained from a portable laser digital vibrometer. While the 1-Dimensional value such as safety factor, deformation of hinges and stress analysis are obtained from finite elements simulation. Finally, the findings help to find the best design judging from the most travelled distance of the piezoelectric actuators. In addition, this paper would provide a clear picture the behavior of the CM embedded in the UVAM, which can provide good data and to improve the machining on reducing tool wear, and lower cutting force on the workpiece surface roughness.

Integrative Analysis of Genetic, Genomic, and Phenotypic Data for Ethanol Behaviors: A Network-Based Pipeline for Identifying Mechanisms and Potential Drug Targets.

PubMed

Bogenpohl, James W; Mignogna, Kristin M; Smith, Maren L; Miles, Michael F

2017-01-01

Complex behavioral traits, such as alcohol abuse, are caused by an interplay of genetic and environmental factors, producing deleterious functional adaptations in the central nervous system. The long-term behavioral consequences of such changes are of substantial cost to both the individual and society. Substantial progress has been made in the last two decades in understanding elements of brain mechanisms underlying responses to ethanol in animal models and risk factors for alcohol use disorder (AUD) in humans. However, treatments for AUD remain largely ineffective and few medications for this disease state have been licensed. Genome-wide genetic polymorphism analysis (GWAS) in humans, behavioral genetic studies in animal models and brain gene expression studies produced by microarrays or RNA-seq have the potential to produce nonbiased and novel insight into the underlying neurobiology of AUD. However, the complexity of such information, both statistical and informational, has slowed progress toward identifying new targets for intervention in AUD. This chapter describes one approach for integrating behavioral, genetic, and genomic information across animal model and human studies. The goal of this approach is to identify networks of genes functioning in the brain that are most relevant to the underlying mechanisms of a complex disease such as AUD. We illustrate an example of how genomic studies in animal models can be used to produce robust gene networks that have functional implications, and to integrate such animal model genomic data with human genetic studies such as GWAS for AUD. We describe several useful analysis tools for such studies: ComBAT, WGCNA, and EW_dmGWAS. The end result of this analysis is a ranking of gene networks and identification of their cognate hub genes, which might provide eventual targets for future therapeutic development. Furthermore, this combined approach may also improve our understanding of basic mechanisms underlying gene x environmental interactions affecting brain functioning in health and disease.

INTEGRATIVE ANALYSIS OF GENETIC, GENOMIC AND PHENOTYPIC DATA FOR ETHANOL BEHAVIORS: A NETWORK-BASED PIPELINE FOR IDENTIFYING MECHANISMS AND POTENTIAL DRUG TARGETS

PubMed Central

Bogenpohl, James W.; Mignogna, Kristin M.; Smith, Maren L.; Miles, Michael F.

2016-01-01

Complex behavioral traits, such as alcohol abuse, are caused by an interplay of genetic and environmental factors, producing deleterious functional adaptations in the central nervous system. The long-term behavioral consequences of such changes are of substantial cost to both the individual and society. Substantial progress has been made in the last two decades in understanding elements of brain mechanisms underlying responses to ethanol in animal models and risk factors for alcohol use disorder (AUD) in humans. However, treatments for AUD remain largely ineffective and few medications for this disease state have been licensed. Genome-wide genetic polymorphism analysis (GWAS) in humans, behavioral genetic studies in animal models and brain gene expression studies produced by microarrays or RNA-seq have the potential to produce non-biased and novel insight into the underlying neurobiology of AUD. However, the complexity of such information, both statistical and informational, has slowed progress toward identifying new targets for intervention in AUD. This chapter describes one approach for integrating behavioral, genetic, and genomic information across animal model and human studies. The goal of this approach is to identify networks of genes functioning in the brain that are most relevant to the underlying mechanisms of a complex disease such as AUD. We illustrate an example of how genomic studies in animal models can be used to produce robust gene networks that have functional implications, and to integrate such animal model genomic data with human genetic studies such as GWAS for AUD. We describe several useful analysis tools for such studies: ComBAT, WGCNA and EW_dmGWAS. The end result of this analysis is a ranking of gene networks and identification of their cognate hub genes, which might provide eventual targets for future therapeutic development. Furthermore, this combined approach may also improve our understanding of basic mechanisms underlying gene x environmental interactions affecting brain functioning in health and disease. PMID:27933543

Tribological characteristics of silicon carbide whisker-reinforced alumina at elevated temperatures

NASA Technical Reports Server (NTRS)

Dellacorte, Christopher

1991-01-01

The enhanced fracture toughness of whisker reinforced ceramics makes them attractive candidates for sliding components of advanced hear engines. Examples include piston rings and valve stems for Stirling engines and other low heat rejection devices. However, the tribological behavior of whisker reinforced ceramics is largely unknown. This is especially true for the applications described where use temperatures can vary from below ambient to well over 1000 C. An experimental research program to identify the dominant wear mechanism(s) for a silicon carbide whisker reinforced alumina composite, SiCw-Al2O3 is described. In addition, a wear mechanism model is developed to explain and corroborate the experimental results and to provide insight for material improvement.

The curving calculation of a mechanical device attached to a multi-storey car park

NASA Astrophysics Data System (ADS)

Muscalagiu, C. G.; Muscalagiu, I.; Muscalagiu, D. M.

2017-01-01

Study bunk storage systems for motor vehicles developed much lately due to high demand for parking in congested city centers. In this paper we propose to study mechanism drive bunk platforms for dynamic request. This paper aims to improve the response mechanism on a platform behavior self during operation of the system and identify hot spots. In this paper we propose to analyze the deformations of the superposed platform in the points of application of the exterior forces produced by the weight of the vehicle in a dynamic way. This paper aims to automate the necessary computation for the analysis of the deformations of the superposed platform using Netlogo language.

Antinociceptive efficacy of lacosamide in the monosodium iodoacetate rat model for osteoarthritis pain

PubMed Central

Beyreuther, Bettina; Callizot, Noëlle; Stöhr, Thomas

2007-01-01

The etiology of osteoarthritis is multifactorial, with inflammatory, metabolic, and mechanical causes. Pain in osteoarthritis is initiated by mild intra-articular inflammation and degeneration of articular cartilage and subchondral bone. The principle of treatment with acetaminophen or non-steroidal anti-inflammatory drugs is to reduce pain and improve joint function. Recently, animal models for osteoarthritic pain behavior have been established. The most frequently used rat model for analyzing properties of drugs on the pathology of osteoarthritis is the injection of the metabolic inhibitor monosodium iodoacetate into the joint, which inhibits the activity of glyceraldehyde-3-phosphate dehydrogenase in chondrocytes. Here, we characterize the effect on pain behavior of lacosamide, a member of a family of functionalized amino acids that are analogues of endogenous amino acids and D-serine, in the monosodium iodoacetate rat model for osteoarthritis in comparison to diclofenac and morphine. Lacosamide (3, 10, and 30 mg/kg) was able to reduce secondary mechanical allodynia and hyperalgesia similarly to morphine (3 mg/kg). In contrast, diclofenac (30 mg/kg) was only effective in reducing secondary mechanical hyperalgesia. During the first week, pain is induced mainly by inflammation in the iodoacetate model, but afterwards inflammation plays only a minor role in pain. Lacosamide was able to inhibit pain at days 3, 7 and 14 after induction of arthritis. This shows that lacosamide is able to reduce pain behavior induced by multiple mechanisms in animals. PMID:17284318

Short-term cognitive behavioral partial hospital treatment: a pilot study.

PubMed

Neuhaus, Edmund C; Christopher, Michael; Jacob, Karen; Guillaumot, Julien; Burns, James P

2007-09-01

Brief, cost-contained, and effective psychiatric treatments benefit patients and public health. This naturalistic pilot study examined the effectiveness of a 2-week, cognitive-behavioral therapy (CBT) oriented partial hospital program. Study participants were 57 patients with mood, anxiety, and/or personality disorders receiving treatment in a private psychiatric partial hospital (PH) setting. A flexible treatment model was used that adapts evidence-based CBT treatment interventions to the PH context with emphases on psychoeducation and skills training. Participants completed self-report measures at admission and after 1 and 2 weeks, to assess stabilization and functional improvements, with added attention to the acquisition of cognitive and behavioral skills. The data were analyzed using repeated measures analyses of variance and correlation. Participants reported a decrease in symptoms and negative thought patterns, improved satisfaction with life, and acquisition and use of cognitive and behavioral skills. Skill acquisition was correlated with symptom reduction, reduced negative thought patterns, and improved satisfaction with life. Results of this pilot study suggest that a 2-week PH program can be effective for a heterogeneous patient population with mood, anxiety, and/or personality disorders. These findings are promising given the prevalence of treatments of such brief duration in private sector PH programs subject to the managed care marketplace. Future studies are planned to test this flexible PH treatment model, with particular attention to the effectiveness of the CBT approach for the treatment of different disorders and to whether effectiveness is sustained at follow-up. Further study should also examine whether skill acquisition is a mechanism of change for symptom reduction and functional improvements.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Panwar, Ranvir Singh, E-mail: ranvir.panwar@thapar.edu; Pandey, O.P., E-mail: oppandey@thapar.edu

Particulate reinforced aluminum metal matrix composite is in high demand in automobile industry where the operational conditions vary from low to high temperature. In order to understand the wear mode at elevated temperature, this study was planned. For this purpose we developed a metal matrix composite containing aluminum alloy (LM13) as matrix and zircon sand as particulate reinforcement by stir casting process. Different amounts of zircon sand (5, 10, 15 and 20 wt.%) were incorporated in the matrix to study the effect of reinforcement on the wear resistance. Dispersion of zircon sand particles in the matrix was confirmed by usingmore » optical microscopy. Sliding wear tests were done to study the durability of the composite with respect to the base alloy. The effects of load and temperature on wear behavior from room temperature to 300 Degree-Sign C were studied to understand the wear mechanism deeply. Surface morphology of the worn surfaces after the wear tests as well as wear debris was observed under scanning electron microscope. Mild to severe wear transition was noticed in tests at high temperature and high load. However, there is interesting change in wear behavior of the composite near the critical temperature of the composite. All the observed behavior has been explained with reference to the observed microstructure of the wear track and debris. - Highlights: Black-Right-Pointing-Pointer Good interfacial bonding between zircon sand particles and Al matrix was observed. Black-Right-Pointing-Pointer The effect of temperature on the wear behavior of LM13/Zr composites was studied. Black-Right-Pointing-Pointer Wear resistance of the composite was improved with addition of zircon sand. Black-Right-Pointing-Pointer Transition temperature from mild to severe wear also improved in composite. Black-Right-Pointing-Pointer SEM analysis of the tracks and debris was done to establish wear mechanism.« less

An Overview of Kinematic and Calibration Models Using Internal/External Sensors or Constraints to Improve the Behavior of Spatial Parallel Mechanisms

PubMed Central

Majarena, Ana C.; Santolaria, Jorge; Samper, David; Aguilar, Juan J.

2010-01-01

This paper presents an overview of the literature on kinematic and calibration models of parallel mechanisms, the influence of sensors in the mechanism accuracy and parallel mechanisms used as sensors. The most relevant classifications to obtain and solve kinematic models and to identify geometric and non-geometric parameters in the calibration of parallel robots are discussed, examining the advantages and disadvantages of each method, presenting new trends and identifying unsolved problems. This overview tries to answer and show the solutions developed by the most up-to-date research to some of the most frequent questions that appear in the modelling of a parallel mechanism, such as how to measure, the number of sensors and necessary configurations, the type and influence of errors or the number of necessary parameters. PMID:22163469

Mechanical Characterization and Corrosion Testing of X608 Al Alloy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Prabhakaran, Ramprashad; Choi, Jung-Pyung; Stephens, Elizabeth V.

2016-02-07

This paper describes the mechanical characterization and corrosion testing of X608 Al alloy that is being considered for A-pillar covers for heavy-duty truck applications. Recently, PNNL developed a thermo-mechanical process to stamp A-pillar covers at room temperature using this alloy, and the full-size prototype was successfully stamped by a tier-1 supplier. This study was conducted to obtain additional important information related to the newly developed forming process, and to further improve its mechanical properties. The solutionization temperature, pre-strain and paint-bake heat-treatment were found to influence the alloy’s fabricability and mechanical properties. Natural aging effect on the formability was investigated bymore » limiting dome height (LDH) tests. Preliminary corrosion experiments showed that the employed thermo-mechanical treatments did not significantly affect the corrosion behavior of Al X608.« less

The role of mechanical loading in ligament tissue engineering.

PubMed

Benhardt, Hugh A; Cosgriff-Hernandez, Elizabeth M

2009-12-01

Tissue-engineered ligaments have received growing interest as a promising alternative for ligament reconstruction when traditional transplants are unavailable or fail. Mechanical stimulation was recently identified as a critical component in engineering load-bearing tissues. It is well established that living tissue responds to altered loads through endogenous changes in cellular behavior, tissue organization, and bulk mechanical properties. Without the appropriate biomechanical cues, new tissue formation lacks the necessary collagenous organization and alignment for sufficient load-bearing capacity. Therefore, tissue engineers utilize mechanical conditioning to guide tissue remodeling and improve the performance of ligament grafts. This review provides a comparative analysis of the response of ligament and tendon fibroblasts to mechanical loading in current bioreactor studies. The differential effect of mechanical stimulation on cellular processes such as protease production, matrix protein synthesis, and cell proliferation is examined in the context of tissue engineering design.

Pharmacological analyses of learning and memory in zebrafish (Danio rerio).

PubMed

Bailey, Jordan M; Oliveri, Anthony N; Levin, Edward D

2015-12-01

Over the last decade, zebrafish (Danio rerio) have become valuable as a complementary model in behavioral pharmacology, opening a new avenue for understanding the relationships between drug action and behavior. This species offers a useful intermediate approach bridging the gap between in vitro studies and traditional mammalian models. Zebrafish offer great advantages of economy compared to their rodent counterparts, their complex brains and behavioral repertoire offer great translational potential relative to in vitro models. The development and validation of a variety of tests to measure behavior, including cognition, in zebrafish have set the stage for the use of this animal for behavioral pharmacology studies. This has led to research into the basic mechanisms of cognitive function as well as screening for potential cognition-improving drug therapies, among other lines of research. As with all models, zebrafish have limitations, which span pharmacokinetic challenges to difficulties quantifying behavior. The use, efficacy and limitations associated with a zebrafish model of cognitive function are discussed in this review, within the context of behavioral pharmacology. Copyright © 2015 Elsevier Inc. All rights reserved.

Sleep Fragmentation Exacerbates Mechanical Hypersensitivity and Alters Subsequent Sleep-Wake Behavior in a Mouse Model of Musculoskeletal Sensitization

PubMed Central

Sutton, Blair C.; Opp, Mark R.

2014-01-01

Study Objectives: Sleep deprivation, or sleep disruption, enhances pain in human subjects. Chronic musculoskeletal pain is prevalent in our society, and constitutes a tremendous public health burden. Although preclinical models of neuropathic and inflammatory pain demonstrate effects on sleep, few studies focus on musculoskeletal pain. We reported elsewhere in this issue of SLEEP that musculoskeletal sensitization alters sleep of mice. In this study we hypothesize that sleep fragmentation during the development of musculoskeletal sensitization will exacerbate subsequent pain responses and alter sleep-wake behavior of mice. Design: This is a preclinical study using C57BL/6J mice to determine the effect on behavioral outcomes of sleep fragmentation combined with musculoskeletal sensitization. Methods: Musculoskeletal sensitization, a model of chronic muscle pain, was induced using two unilateral injections of acidified saline (pH 4.0) into the gastrocnemius muscle, spaced 5 days apart. Musculoskeletal sensitization manifests as mechanical hypersensitivity determined by von Frey filament testing at the hindpaws. Sleep fragmentation took place during the consecutive 12-h light periods of the 5 days between intramuscular injections. Electroencephalogram (EEG) and body temperature were recorded from some mice at baseline and for 3 weeks after musculoskeletal sensitization. Mechanical hypersensitivity was determined at preinjection baseline and on days 1, 3, 7, 14, and 21 after sensitization. Two additional experiments were conducted to determine the independent effects of sleep fragmentation or musculoskeletal sensitization on mechanical hypersensitivity. Results: Five days of sleep fragmentation alone did not induce mechanical hypersensitivity, whereas sleep fragmentation combined with musculoskeletal sensitization resulted in prolonged and exacerbated mechanical hypersensitivity. Sleep fragmentation combined with musculoskeletal sensitization had an effect on subsequent sleep of mice as demonstrated by increased numbers of sleep-wake state transitions during the light and dark periods; changes in nonrapid eye movement (NREM) sleep, rapid eye movement sleep, and wakefulness; and altered delta power during NREM sleep. These effects persisted for at least 3 weeks postsensitization. Conclusions: Our data demonstrate that sleep fragmentation combined with musculoskeletal sensitization exacerbates the physiological and behavioral responses of mice to musculoskeletal sensitization, including mechanical hypersensitivity and sleep-wake behavior. These data contribute to increasing literature demonstrating bidirectional relationships between sleep and pain. The prevalence and incidence of insufficient sleep and pathologies characterized by chronic musculoskeletal pain are increasing in the United States. These demographic data underscore the need for research focused on insufficient sleep and chronic pain so that the quality of life for the millions of individuals with these conditions may be improved. Citation: Sutton BC; Opp MR. Sleep fragmentation exacerbates mechanical hypersensitivity and alters subsequent sleep-wake behavior in a mouse model of musculoskeletal sensitization. SLEEP 2014;37(3):515-524. PMID:24587574

Temperature-Compensated Clock Skew Adjustment

PubMed Central

Castillo-Secilla, Jose María; Palomares, Jose Manuel; Olivares, Joaquín

2013-01-01

This work analyzes several drift compensation mechanisms in wireless sensor networks (WSN). Temperature is an environmental factor that greatly affects oscillators shipped in every WSN mote. This behavior creates the need of improving drift compensation mechanisms in synchronization protocols. Using the Flooding Time Synchronization Protocol (FTSP), this work demonstrates that crystal oscillators are affected by temperature variations. Thus, the influence of temperature provokes a low performance of FTSP in changing conditions of temperature. This article proposes an innovative correction factor that minimizes the impact of temperature in the clock skew. By means of this factor, two new mechanisms are proposed in this paper: the Adjusted Temperature (AT) and the Advanced Adjusted Temperature (A2T). These mechanisms have been combined with FTSP to produce AT-FTSP and A2T-FTSP Both have been tested in a network of TelosB motes running TinyOS. Results show that both AT-FTSP and A2T-FTSP improve the average synchronization errors compared to FTSP and other temperature-compensated protocols (Environment-Aware Clock Skew Estimation and Synchronization for WSN (EACS) and Temperature Compensated Time Synchronization (TCTS)). PMID:23966192

Voluntary Exercise Produces Antidepressant and Anxiolytic Behavioral Effects in Mice

PubMed Central

Duman, Catharine H.; Schlesinger, Lee; Russell, David S.; Duman, Ronald S.

2008-01-01

Reports of beneficial effects of exercise on psychological health in humans are increasingly supported by basic research studies. Exercise is hypothesized to regulate antidepressant-related mechanisms and we therefore characterized the effects of chronic exercise in mouse behavioral paradigms relevant to antidepressant actions. Mice given free access to running wheels showed antidepressant-like behavior in learned helplessness, forced-swim (FST) and tail suspension paradigms. These responses were similar to responses of antidepressant drug-treated animals. When tested under conditions where locomotor activity was not altered, exercising mice also showed reduced anxiety compared to sedentary control mice. In situ hybridization analysis showed that BDNF mRNA was increased in specific subfields of hippocampus after wheel running. We chose one paradigm, the FST, in which to investigate a functional role for brain-derived neurotrophic factor (BDNF) in the behavioral response to exercise. We tested mice heterozygous for a deletion of the BDNF gene in the FST after wheel-running. Exercising wild-type mice showed the expected antidepressant-like behavioral response in the FST but exercise was ineffective in improving FST performance in heterozygous BDNF knockout mice. A possible functional contribution of a BDNF signaling pathway to FST performance in exercising mice was investigated using the specific MEK inhibitor PD184161 to block the MAPK signaling pathway. Subchronic administration of PD184161 to exercising mice blocked the antidepressant-like behavioral response seen in vehicle-treated exercising mice in the FST. In summary, chronic wheel-running exercise in mice results in antidepressant-like behavioral changes that may involve a BDNF related mechanism similar to that hypothesized for antidepressant drug treatment. PMID:18267317

Emodin opposes chronic unpredictable mild stress induced depressive-like behavior in mice by upregulating the levels of hippocampal glucocorticoid receptor and brain-derived neurotrophic factor.

PubMed

Li, Meng; Fu, Qiang; Li, Ying; Li, Shanshan; Xue, Jinsong; Ma, Shiping

2014-10-01

Emodin, the major active component of Rhubarb, has shown neuroprotective activity. This study is attempted to investigate whether emodin possesses beneficial effects on chronic unpredictable mild stress (CUMS)-induced behavioral deficits (depression-like behaviors) and explore the possible mechanisms. ICR mice were subjected to chronic unpredictable mild stress for 42 consecutive days. Then, emodin and fluoxetine (positive control drug) were administered for 21 consecutive days at the last three weeks of CUMS procedure. The classical behavioral tests: open field test (OFT), sucrose preference test (SPT), tail suspension test (TST) and forced swimming test (FST) were applied to evaluate the antidepressant effects of emodin. Then plasma corticosterone concentration, hippocampal glucocorticoid receptor (GR) and brain-derived neurotrophic factor (BDNF) levels were tested to probe the mechanisms. Our results indicated that 6 weeks of CUMS exposure induced significant depression-like behavior, with high, plasma corticosterone concentration and low hippocampal GR and BDNF expression levels. Whereas, chronic emodin (20, 40 and 80 mg/kg) treatments reversed the behavioral deficiency induced by CUMS exposure. Treatment with emodin normalized the change of plasma corticosterone level, which demonstrated that emodin could partially restore CUMS-induced HPA axis impairments. Besides, hippocampal GR (mRNA and protein) and BDNF (mRNA) expressions were also up-regulated after emodin treatments. In conclusion, emodin remarkably improved depression-like behavior in CUMS mice and its antidepressant activity is mediated, at least in part, by the up-regulating GR and BDNF levels in hippocampus. Copyright © 2014 Elsevier B.V. All rights reserved.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Xiong, Guangyao; Luo, Honglin; School of Materials Science and Engineering, Tianjin Key Laboratory of Composite and Functional Materials, Key Laboratory of Advanced Ceramics and Machining Technology, Ministry of Education, Tianjin University, Tianjin 300072

Graphene oxide (GO) and hydroxyapatite (HAp) are frequently used as reinforcements in polymers to improve mechanical and biological properties. In this work, novel porous hybrid nanocomposites consisting of GO, HAp, and sodium alginate (SA) have been prepared by facile solution mixing and freeze drying in an attempt to obtain a scaffold with desirable mechanical and biological properties. The as-prepared porous GO/HAp/SA hybrid nanocomposites were characterized by SEM, XRD, FTIR, TGA, and mechanical testing. In addition, preliminary cell behavior was assessed by CCK8 assay. It is found that the GO/HAp/SA nanocomposites show improved compressive strength and modulus over neat SA andmore » HAp/SA nanocomposites. CCK8 results reveal that the GO/HAp/SA nanocomposites show enhanced cell proliferation over neat SA and GO/SA nanocomposite. It has been demonstrated that GO/HAp20/SA holds promise in bone tissue engineering. - Graphical abstract: Display Omitted - Highlights: • Graphene oxide (GO), hydroxyapatite (HAp), and alginate (SA) nanocomposites were fabricated. • The novel porous composites were prepared by solution mixture and freeze drying. • The GO/HAp/SA had porous structure with porosity > 85% and pore size > 150 μm. • The GO/HAp/SA exhibited improved mechanical properties over HAp/SA counterparts. • The GO/HAp/SA showed enhanced cell proliferation over GO/SA counterparts.« less

Nanoscale Protection Layers To Mitigate Degradation in High-Energy Electrochemical Energy Storage Systems.

PubMed

Lin, Chuan-Fu; Qi, Yue; Gregorczyk, Keith; Lee, Sang Bok; Rubloff, Gary W

2018-01-16

In the pursuit of energy storage devices with higher energy and power, new ion storage materials and high-voltage battery chemistries are of paramount importance. However, they invite-and often enhance-degradation mechanisms, which are reflected in capacity loss with charge/discharge cycling and sometimes in safety problems. Degradation mechanisms are often driven by fundamentals such as chemical and electrochemical reactions at electrode-electrolyte interfaces, volume expansion and stress associated with ion insertion and extraction, and profound inhomogeneity of electrochemical behavior. While it is important to identify and understand these mechanisms at some reasonable level, it is even more critical to design strategies to mitigate these degradation pathways and to develop means to implement and validate the strategies. A growing set of research highlights the mitigation benefits achievable by forming thin protection layers (PLs) intentionally created as artificial interphase regions at the electrode-electrolyte interface. These advances illustrate a promising-perhaps even generic-pathway for enabling higher-energy and higher-voltage battery configurations. In this Account, we summarize examples of such PLs that serve as mitigation strategies to avoid degradation in lithium metal anodes, conversion-type electrode materials, and alloy-type electrodes. Examples are chosen from a larger body of electrochemical degradation research carried out in Nanostructures for Electrical Energy Storage (NEES), our DOE Energy Frontier Research Center. Overall, we argue on the basis of experimental and theoretical evidence that PLs effectively stabilize the electrochemical interfaces to prevent parasitic chemical and electrochemical reactions and mitigate the structural, mechanical, and compositional degradation of the electrode materials at the electrode-electrolyte interfaces. The evidenced improvement in performance metrics is accomplished by (1) establishing a homogeneous interface for ion insertion and extraction, (2) providing mechanical constraints to maintain structural integrity and robust electronic and ionic conduction pathways, and (3) introducing spatial confinements on the electrode material matrix to alter the phase transformation (delaying the occurrence of the conversion reaction) upon Li insertion, which results in superior electrode performance, excellent capacity retention, and improved reversibility. Taken together, these examples portray a valuable role for thin protection layers synthesized over electrode surfaces, both for their benefit to cycle stability and for revealing insights into degradation and mitigation mechanisms. Furthermore, they underscore the impact of complex electrochemical behavior at nanoscale materials and nanostructure interfaces in modulating the behavior of energy storage devices at the mesoscale and macroscale.

Oxytocin Enables Maternal Behavior by Balancing Cortical Inhibition

PubMed Central

Marlin, Bianca J.; Mitre, Mariela; D’amour, James A.; Chao, Moses V.; Froemke, Robert C.

2015-01-01

Oxytocin is important for social interactions and maternal behavior. However, little is known about when, where, and how oxytocin modulates neural circuits to improve social cognition. Here we show how oxytocin enables pup retrieval behavior in female mice by enhancing auditory cortical pup call responses. Retrieval behavior required left but not right auditory cortex, was accelerated by oxytocin in left auditory cortex, and oxytocin receptors were preferentially expressed in left auditory cortex. Neural responses to pup calls were lateralized, with co-tuned and temporally-precise excitatory and inhibitory responses in left cortex of maternal but not pup-naive adults. Finally, pairing calls with oxytocin enhanced responses by balancing the magnitude and timing of inhibition with excitation. Our results describe fundamental synaptic mechanisms by which oxytocin increases the salience of acoustic social stimuli. Furthermore, oxytocin-induced plasticity provides a biological basis for lateralization of auditory cortical processing. PMID:25874674

Drosophila TRP channels and animal behavior

PubMed Central

Fowler, Melissa A.; Montell, Craig

2012-01-01

Multiple classes of cell surface receptors and ion channels participate in the detection of changes in environmental stimuli, and thereby influence animal behavior. Among the many classes of ion channels, Transient Receptor Potential (TRP) cation channels are notable in contributing to virtually every sensory modality, and in controlling a daunting array of behaviors. TRP channels appear to be conserved in all metazoan organisms including worms, insects and humans. Flies encode 13 TRPs, most of which are expressed and function in sensory neurons, and impact behaviors ranging from phototaxis to thermotaxis, gravitaxis, the avoidance of noxious tastants and smells and proprioception. Multiple diseases result from defects in TRPs, and flies provide an excellent animal model for dissecting the mechanisms underlying “TRPopathies.” Drosophila TRPs also function in the sensation of botanically derived insect repellents, and related TRPs in insect pests are potential targets for the development of improved repellents to combat insect-borne diseases. PMID:22877650

The effect of surface modification of glass fiber on the performance of poly(lactic acid) composites: Graphene oxide vs. silane coupling agents

NASA Astrophysics Data System (ADS)

Jing, Mengfan; Che, Junjin; Xu, Shuman; Liu, Zhenwei; Fu, Qiang

2018-03-01

In this work, a comparison study was carried out to investigate the efficacy of glass fiber (GF) in reinforcing poly(lactic acid) (PLA) by using traditional silane coupling agents (GF-S) and novel graphene oxide (GF-GO) as surface modifiers. The crystallization behavior of the PLA matrix was investigated by differential scanning calorimetry. The mechanical performances and the thermomechanical properties of the composites were evaluated by uniaxial tensile testing and dynamic mechanical analysis, respectively. For neat GF without any treatment, the poor interfacial adhesion and the sharp shortening of the GF length result in the relatively poor mechanical performances of PLA/GF composites. However, the incorporation of GF-S significantly improves the mechanical strength and keeps relatively good toughness of the composites, while GF-GO exhibits excellent nucleation ability for PLA and could moderately increase the modulus of the composites. The thermomechanical properties of the composites are improved markedly resulting from the crystallinity increase. The different surface modification of glass fiber influences the crystallinity of matrix, the interfacial interaction and the length of fiber, which altogether affect the mechanical performances of the prepared PLA/GF composites.

Thermophysical and mechanical characterization of clay bricks reinforced by alfa or straw fibers

NASA Astrophysics Data System (ADS)

Elhamdouni, Y.; Khabbazi, A.; Benayad, C.; Mounir, S.; Dadi, A.

2017-03-01

This work is part of the valuation of local materials such as clay (earth), alfa fiber and straw fiber. The goal is to use these materials as bricks in rural construction. These materials are abundant, natural, and renewable. The objective of this work is to study the thermal and mechanical behavior of a new material by mixing clay (chosen as the binder) with different mass percentages of alfa fiber (0.5%, 1%, 2%, 3%, 4%), and to compare these results with those of materials often used in the construction of individual houses in rural Morocco (clay + straw). The results obtained prove to us that using straw fibers can reduce the thermal conductivity compared to alfa fiber, which allows to have energy savings of 2% to 7%. By against, alfa fibers can improve the mechanical behavior of clay-based materials when compared to the clay + straw material (an increase of 8% to 17% in the tractive resistance by bending and 6% to 18% for compression resistance). These results also specify the optimal usage conditions of these fibers (alfa and straw) in the clay bricks.

Effect of MoSi2 Content on Dry Sliding Tribological Properties of Zr-Based Bulk Metallic Glass Composites

NASA Astrophysics Data System (ADS)

Liu, Longfei; Yang, Jun

2017-12-01

Zr55Cu30Al10Ni5 bulk metallic glass and its composites were prepared by suction casting into a copper mold. The effect of MoSi2 content on the tribological behavior of Zr55Cu30Al10Ni5 BMG was studied by using a high-speed reciprocating friction and wear tester. The results indicate that the friction coefficient and wear resistance of the BMGs can be improved by a certain amount of crystalline phase induced by MoSi2 content from 1 to 3% and deteriorated with MoSi2 content of 4%. The wear mechanism of both the metallic glass and its composite is abrasive wear. The mechanism of crystalline phase-dependent tribological properties of the composite was discussed based on the wear track and mechanical properties in the present work. The wear behavior of Zr55Cu30Al10Ni5 BMG and its composite indicates that a good combination of the toughness and the hardness can make the composite be well wear resistant.

High temperature tensile behavior and microstructure of Al-SiC nanocomposite fabricated by mechanical milling and hot extrusion technique

NASA Astrophysics Data System (ADS)

Soltani, Mohammadreza; Atrian, Amir

2018-02-01

This paper investigates the high-temperature tensile behavior of Al-SiC nanocomposite reinforced with 0, 1.5, and 3 vol% SiC nano particles. To fabricate the samples, SiC nano reinforcements and aluminum (Al) powders were milled using an attritor milling and then were cold pressed and hot extruded at 500 °C. Afterward, mechanical and microstructural characteristics were studied in different temperatures. To this end, tensile and compressive tests, micro-hardness test, microscopic examinations, and XRD analysis were performed. The results showed significant improvement of mechanical properties of Al-SiC nanocomposite in room temperature including 40% of ultimate tensile strength (UTS), 36% of ultimate compressive strength (UCS), and 44% of micro-hardness. Moreover, performing tensile tests at elevated temperatures (up to 270 °C) decreased the tensile strength by about 53%, 46%, and 45% for Al-0 vol% SiC, Al-1.5 vol% SiC, and Al-3 vol% SiC, respectively. This temperature rise also enhanced the elongation by about 11% and 133% for non-reinforced Al and Al-3 vol% SiC, respectively.

PEG-chitosan hydrogel with tunable stiffness for study of drug response of breast cancer cells

PubMed Central

Chang, Fei-Chien; Tsao, Ching-Ting; Lin, Anqi; Zhang, Mengying; Levengood, Sheeny Lan; Zhang, Miqin

2016-01-01

Mechanical properties of the extracellular matrix have a profound effect on the behavior of anchorage-dependent cells. However, the mechanisms that define the effects of matrix stiffness on cell behavior remains unclear. Therefore, the development and fabrication of synthetic matrices with well-defined stiffness is invaluable for studying the interactions of cells with their biophysical microenvironment in vitro. We demonstrate a methoxypolyethylene glycol (mPEG)-modified chitosan hydrogel network where hydrogel stiffness can be easily modulated under physiological conditions by adjusting the degree of mPEG grafting onto chitosan (PEGylation). We show that the storage modulus of the hydrogel increases as PEGylation decreases and the gels exhibit instant self-recovery after deformation. Breast cancer cells cultured on the stiffest hydrogels adopt a more malignant phenotype with increased resistance to doxorubicin as compared with cells cultured on tissue culture polystyrene or Matrigel. This work demonstrates the utility of mPEG-modified chitosan hydrogel, with tunable mechanical properties, as an improved replacement of conventional culture system for in vitro characterization of breast cancer cell phenotype and evaluation of cancer therapies. PMID:27595012

Health-related quality of life in randomized controlled trials of lorcaserin for obesity management: what mediates improvement?

PubMed

Kolotkin, R L; Crosby, R D; Wang, Z

2017-12-01

Lorcaserin, plus diet and exercise, has demonstrated significant weight loss and improved cardiometabolic parameters vs. placebo in patients with overweight/obesity in three randomized, placebo-controlled trials. We examined whether lorcaserin is also associated with greater improvements in health-related quality of life (HRQOL) and whether these improvements are wholly attributable to weight loss. Pooled data from Behavioral Modification and Lorcaserin for Overweight and Obesity Management (BLOOM), Behavioral Modification and Lorcaserin Second Study for Obesity Management (BLOSSOM) and BLOOM-Diabetes Mellitus (BLOOM-DM) trials were analysed (n = 5624). HRQOL was assessed at baseline and 52 weeks using the Impact of Weight on Quality of Life-Lite (IWQOL-Lite) questionnaire. Multiple mediation analyses were conducted to evaluate the mechanisms underlying improved HRQOL. Greater HRQOL improvements were observed at 52 weeks in lorcaserin vs. placebo (P < 0.0001). A greater percentage of lorcaserin patients (54.1%) experienced meaningful improvements in IWQOL-Lite total score than placebo patients (48.2%) (P < 0.001). Body mass index (BMI) reduction was the primary driver of improved HRQOL (P < 0.0001), with depressive symptoms and total cholesterol also playing a role (P < 0.05). Improved HRQOL varied by gender, age, race and presence of diabetes and other comorbidities. Lorcaserin treatment significantly improves HRQOL compared with placebo. Although BMI reduction accounts for the majority of these improvements, improvement in depressive symptoms and total cholesterol are contributing factors. © 2017 World Obesity Federation.

The dynamic failure behavior of tungsten heavy alloys subjected to transverse loads

NASA Astrophysics Data System (ADS)

Tarcza, Kenneth Robert

Tungsten heavy alloys (WHA), a category of particulate composites used in defense applications as kinetic energy penetrators, have been studied for many years. Even so, their dynamic failure behavior is not fully understood and cannot be predicted by numerical models presently in use. In this experimental investigation, a comprehensive understanding of the high-rate transverse-loading fracture behavior of WHA has been developed. Dynamic fracture events spanning a range of strain rates and loading conditions were created via mechanical testing and used to determine the influence of surface condition and microstructure on damage initiation, accumulation, and sample failure under different loading conditions. Using standard scanning electron microscopy metallographic and fractographic techniques, sample surface condition is shown to be extremely influential to the manner in which WHA fails, causing a fundamental change from externally to internally nucleated failures as surface condition is improved. Surface condition is characterized using electron microscopy and surface profilometry. Fracture surface analysis is conducted using electron microscopy, and linear elastic fracture mechanics is used to understand the influence of surface condition, specifically initial flaw size, on sample failure behavior. Loading conditions leading to failure are deduced from numerical modeling and experimental observation. The results highlight parameters and considerations critical to the understanding of dynamic WHA fracture and the development of dynamic WHA failure models.

Theoretical and experimental evaluation of the flow behavior of a magnetorheological damper using an extremely bimodal magnetic fluid

NASA Astrophysics Data System (ADS)

Iglesias, G. R.; Ahualli, S.; Echávarri Otero, J.; Fernández Ruiz-Morón, L.; Durán, J. D. G.

2014-08-01

The flow behavior of a magnetorheological (MR) fluid, consisting of iron particles dispersed in a ferrofluid carrier (‘MRFF’) in a commercial monotube MR shock absorber is studied. The magnetorheological properties of the MRFF suspensions are compared with those of a conventional oil-based MR fluid (‘MRF’). The mechanical behavior of the MR damper, filled with the MRFF or alternatively with the MRF, is characterized by means of different oscillatory force-displacement and force-velocity tests. The MR shock absorber has an internal electromagnet that generates a controlled magnetic field in the channels through which the MR suspensions flow under operation conditions. The results obtained indicate that the damper filled with MRFF shows a reliable and reproducible behavior. In particular, the response of the shock absorber can be controlled to a large extent by adjusting the electromagnetic current, showing a response that is independent of the mechanical and magnetic history of the MRFF. The non-linear hysteresis model proposed for predicting the damping force provides good agreement with the experimental results when the MRFF is employed. The improved response of the damper loaded with ferrofluid-based MRFF (instead of the conventional MRF) is explained considering the physical properties and the internal structure of the suspension.

Electrophysiological brain indices of risk behavior modification induced by contingent feedback.

PubMed

Megías, Alberto; Torres, Miguel Angel; Catena, Andrés; Cándido, Antonio; Maldonado, Antonio

2018-02-01

The main aim of this research was to study the effects of response feedback on risk behavior and the neural and cognitive mechanisms involved, as a function of the feedback contingency. Sixty drivers were randomly assigned to one of three feedback groups: contingent, non-contingent and no feedback. The participants' task consisted of braking or not when confronted with a set of risky driving situations, while their electroencephalographic activity was continuously recorded. We observed that contingent feedback, as opposed to non-contingent feedback, promoted changes in the response bias towards safer decisions. This behavioral modification implied a higher demand on cognitive control, reflected in a larger amplitude of the N400 component. Moreover, the contingent feedback, being predictable and entailing more informative value, gave rise to smaller SPN and larger FRN scores when compared with non-contingent feedback. Taken together, these findings provide a new and complex insight into the neurophysiological basis of the influence of feedback contingency on the processing of decision-making under risk. We suggest that response feedback, when contingent upon the risky behavior, appears to improve the functionality of the brain mechanisms involved in decision-making and can be a powerful tool for reducing the tendency to choose risky options in risk-prone individuals. Copyright © 2018 Elsevier B.V. All rights reserved.

MAP-IT: A Practical Tool for Planning Complex Behavior Modification Interventions.

PubMed

Hansen, Sylvia; Kanning, Martina; Lauer, Romy; Steinacker, Jürgen M; Schlicht, Wolfgang

2017-09-01

Health research often aims to prevent noncommunicable diseases and to improve individual and public health by discovering intervention strategies that are effective in changing behavior and/or environments that are detrimental to one's health. Ideally, findings from original research support practitioners in planning and implementing effective interventions. Unfortunately, interventions often fail to overcome the translational block between science and practice. They often ignore theoretical knowledge, overlook empirical evidence, and underrate the impact of the environment. Accordingly, sustainable changes in individual behavior and/or the environment are difficult to achieve. Developing theory-driven and evidence-based interventions in the real world is a complex task. Existing implementation frameworks and theories often do not meet the needs of health practitioners. The purpose of this article is to synthesize existing frameworks and to provide a tool, the Matrix Assisting Practitioner's Intervention Planning Tool (MAP-IT), that links research to practice and helps practitioners to design multicomponent interventions. In this article, we use physical activity of older adults as an example to explain the rationale of MAP-IT. In MAP-IT, individual as well as environmental mechanisms are listed and behavior change techniques are linked to these mechanisms and to intervention components. MAP-IT is theory-driven and evidence-based. It is time-saving and helpful for practitioners when planning complex interventions.

Properties predictive modeling through the concept of a hybrid interphase existing between phases in contact

NASA Astrophysics Data System (ADS)

Portan, D. V.; Papanicolaou, G. C.

2018-02-01

From practical point of view, predictive modeling based on the physics of composite material behavior is wealth generating; by guiding material system selection and process choices, by cutting down on experimentation and associated costs; and by speeding up the time frame from the research stage to the market place. The presence of areas with different properties and the existence of an interphase between them have a pronounced influence on the behavior of a composite system. The Viscoelastic Hybrid Interphase Model (VHIM), considers the existence of a non-homogeneous viscoelastic and anisotropic interphase having properties depended on the degree of adhesion between the two phases in contact. The model applies for any physical/mechanical property (e.g. mechanical, thermal, electrical and/or biomechanical). Knowing the interphasial variation of a specific property one can predict the corresponding macroscopic behavior of the composite. Moreover, the model acts as an algorithm and a two-way approach can be used: (i) phases in contact may be chosen to get the desired properties of the final composite system or (ii) the initial phases in contact determine the final behavior of the composite system, that can be approximately predicted. The VHIM has been proven, amongst others, to be extremely useful in biomaterial designing for improved contact with human tissues.

The Sliding Wear and Friction Behavior of M50-Graphene Self-Lubricating Composites Prepared by Laser Additive Manufacturing at Elevated Temperature

NASA Astrophysics Data System (ADS)

Liu, Xiyao; Shi, Xiaoliang; Huang, Yuchun; Deng, Xiaobin; Lu, Guanchen; Yan, Zhao; Zhou, Hongyan; Xue, Bing

2018-03-01

M50 steel is widely applied to manufacture aircraft bearings where service lives are mainly determined by the friction and wear behaviors. The main purpose of this study is to investigate the tribological behaviors and wear mechanisms of M50-1.5 wt.% graphene composites (MGC) prepared by laser additive manufacturing (LAM) (MGC-LAM) sliding against Si3N4 ball from 25 to 550 °C at 18 N-0.2 m/s. XRD, EPMA, FESEM, and EDS mapping were conducted to understand the major mechanisms leading to the improvement in the sliding behavior of MGC-LAM. The results indicated that MGC-LAM showed the excellent friction and wear performance at 25-550 °C for the lower friction coefficient of 0.16-0.52 and less wear rate of 6.1-9.5 × 10-7 mm3 N-1 m-1. Especially at 350 °C, MGC-LAM obtained the best tribological performance (0.16, 6.1 × 10-7mm3 N-1 m-1). It was attributed to the dense coral-like microstructure, as well as the formed surface lubricating structure which is composed of the upper uniform lubricating film with massive graphene and the underneath compacted layer.

A two-hit model of suicide-trait-related behaviors in the context of a schizophrenia-like phenotype: Distinct effects of lithium chloride and clozapine.

PubMed

Deslauriers, Jessica; Belleville, Karine; Beaudet, Nicolas; Sarret, Philippe; Grignon, Sylvain

2016-03-15

Schizophrenia patients show a high rate of premature mortality due to suicide. The pathophysiological mechanisms of these suicidal behaviors in schizophrenia do not appear to involve serotonergic neurotransmission as found in the general population. Our aim was to develop an in vivo model of schizophrenia presenting suicide-trait-related behaviors such as aggressiveness, impulsivity, anxiety and helplessness. We opted for a two-hit model: C57BL/6 dams were injected with polyI:C on gestational day 12. The pups were submitted to social isolation for 4weeks after weaning. During the last week of social isolation and 30min before behavioral testing, the mice received vehicle, lithium chloride or clozapine. Lithium chloride is well known for its suicide preventive effects in the non-schizophrenic population, while clozapine is the antipsychotic with the best-established suicide preventive effect. The two-hit model induced several schizophrenia-related and suicide-trait-related behaviors in male, but not female, mice. Additionally, lithium chloride improved prepulse inhibition, aggressiveness, impulsivity and anxiety-like behavior in socially isolated mice only, whereas clozapine prevented behavioral abnormalities mainly in mice prenatally exposed to polyI:C and submitted to isolated rearing. The distinct effects of lithium chloride and clozapine suggested that mice prenatally exposed to polyI:C and submitted to social isolation presented a distinct phenotype from that of mice submitted to social isolation only. Because diagnosing suicidal risk in patients is a challenge for psychiatrists given the lack of specific clinical predictors, our in vivo model could help in gaining a better understanding of the mechanisms underlying suicidal behavior in the context of schizophrenia. Copyright © 2016 Elsevier Inc. All rights reserved.

Hypnotherapy of a pain disorder: a clinical case study.

PubMed

Artimon, Henrieta Mihaela

2015-01-01

Hypnotherapy's effectiveness in improving and controlling chronic pain of various etiologies has been demonstrated by studies; the mechanism by which hypnosis does this is more complex than a simple induction of muscle relaxation. This study reveals, in addition to this mechanism, a deeper dimension of hypnotherapy from the vantage of a patient with a medical-surgical background, diagnosed with a pain disorder and major severe depressive disorder in addition to incurable painful symptoms, through treatment associated with hypnoanalysis. Following psychotherapy, which included some elements of cognitive-behavioral therapy, a complete remission of the anxious-depressive mood and the painful symptoms was achieved.

Nanoasperity: structure origin of nacre-inspired nanocomposites.

PubMed

Xia, Shuang; Wang, Zuoning; Chen, Hong; Fu, Wenxin; Wang, Jianfeng; Li, Zhibo; Jiang, Lei

2015-02-24

Natural nacre with superior mechanical property is generally attributed to the layered "brick-and-mortar" nanostructure. However, the role of nanograins on the hard aragonite platelets, which is so-called nanoasperity, is rarely addressed. Herein, we prepared silica platelets with aragonite-like nanoasperities via biomineralization strategy and investigated the effects of nanoasperity on the mechanical properties of resulting layered nanocomposites composed of roughened silica platelets and poly(vinyl alcohol). The tensile deformation behavior of the nanocomposites demonstrates that nanograins on silica platelets are responsive for strain hardening, improved strength, and toughness. The structure origin is attributed to the nanoasperity-controlled platelet sliding.