78 FR 12705 - Atlantic Highly Migratory Species; North and South Atlantic 2013 Commercial Swordfish Quotas

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-25

... dead discards. We will adjust the quotas in the final rule based on updated data, including dead... quota, the sum of updated landings data (from late reports) and dead discard estimates would need to reach or exceed 475 mt dw. In 2011, dead discards were estimated to equal 101.5 mt dw and late reports...

Skin donors and human skin allografts: evaluation of an 11-year practice and discard in a referral tissue bank.

PubMed

Gaucher, Sonia; Khaznadar, Zena; Gourevitch, Jean-Claude; Jarraya, Mohamed

2016-03-01

The Saint Louis hospital tissue bank provides skin allografts to pediatric and adult burn units in the Paris area. The aim of this study was to analyze our activity during the last 11 years focusing on the reasons for skin discard. Skin is procured solely from the back of the body, which is divided into 10 zones that are harvested and processed separately. This retrospective study included all skin donors harvested between June 2002 and June 2013, representing a total of 336 donors and 2770 zones. The donors were multiorgan heart-beating donors in 91 % of cases (n = 307). The main reason for discarding harvested skin was microbial contamination, detected in 99 donors (29 %). Most contaminants were of low pathogenicity. Other reasons for discard included positive serologic tests for 2 donors [17 zones (0.61 %)], unsuitable physical skin characteristics for 3 zones (0.11 %), the donor's medical history for 53 zones (1.91 %), and technical issues with processing or distribution for 61 zones (2.2 %). In our experience, microbial contamination continues to be the main reason for discarding potential skin allografts. However, discards are limited by separate harvesting and processing of multiple zones in each donor.

Lost by Design.

PubMed

Ciacci, Luca; Reck, Barbara K; Nassar, N T; Graedel, T E

2015-08-18

In some common uses metals are lost by intent-copper in brake pads, zinc in tires, and germanium in retained catalyst applications being examples. In other common uses, metals are incorporated into products in ways for which no viable recycling approaches exist, examples include selenium in colored glass and vanadium in pigments. To determine quantitatively the scope of these "losses by design", we have assessed the major uses of 56 metals and metalloids, assigning each use to one of three categories: in-use dissipation, currently unrecyclable when discarded, or potentially recyclable when discarded. In-use dissipation affects fewer than a dozen elements (including mercury and arsenic), but the spectrum of elements dissipated increases rapidly if applications from which they are currently unrecyclable are considered. In many cases the resulting dissipation rates are higher than 50%. Among others, specialty metals (e.g., gallium, indium, and thallium) and some heavy rare earth elements are representative of modern technology, and their loss provides a measure of the degree of unsustainability in the contemporary use of materials and products. Even where uses are currently compatible with recycling technologies and approaches, end of life recycling rates are in most cases well below those that are potentially achievable. The outcomes of this research provide guidance in identifying product design approaches for reducing material losses so as to increase element recovery at end-of-life.

Potential useful products from solid wastes.

PubMed

Golueke, C G; Diaz, L F

1991-10-01

Wastes have been aptly defined as "items, i.e. resources, that have been discarded because their possessors no longer have an apparent use for them". Accordingly, "wastes" have a significance only in relation to the items and those who have discarded them. The discarded items now are resources awaiting reclamation. Reclamation usually involves either salvage or conversion--or in modern terminology, "reuse" or "recycling". Reclamation for reuse consists in refurbishing or other upgrading without significantly altering original form and composition. Examples of wastes amenable to reuse are containers (bottles, etc.), cartons and repairable tires. With "recycling" (i.e. conservation), the discarded items are processed such that they become raw material, i.e. resources in the manufacture of "new" products. The variety of processes is wide, ranging from simply physical (grinding) through thermal (melting, gasification, combustion), to biological (composting, biogasification, hydrolysis, microbial protein production). In the paper, reuse and recycling (conversion) are evaluated in terms of advantages and disadvantages (limitations) and their respective technologies are described and discussed in detail.

From electronic consumer products to e-wastes: Global outlook, waste quantities, recycling challenges.

PubMed

Tansel, Berrin

2017-01-01

Advancements in technology, materials development, and manufacturing processes have changed the consumer products and composition of municipal solid waste (MSW) since 1960s. Increasing quantities of discarded consumer products remain a major challenge for recycling efforts, especially for discarded electronic products (also referred as e-waste). The growing demand for high tech products has increased the e-waste quantities and its cross boundary transport globally. This paper reviews the challenges associated with increasing e-waste quantities. The increasing need for raw materials (especially for rare earth and minor elements) and unregulated e-waste recycling operations in developing and underdeveloped counties contribute to the growing concerns for e-waste management. Although the markets for recycled materials are increasing; there are major challenges for development of the necessary infrastructure for e-waste management and accountability as well as development of effective materials recovery technologies and product design. Copyright © 2016 Elsevier Ltd. All rights reserved.

Index of NACA Technical Publications, July 1956 - June 1957

NASA Technical Reports Server (NTRS)

1957-01-01

This index of NACA Technical Publications covers the NACA research reports issued in the period of July 1956 through June 1957. It is the sixth supplement to the basic 1915-1949 Index. The research reports issued prior to July 1956 which have been declassified since that date have also been included. A list of these reports may be found on pages 243-244. Cards for this list may be discarded as entries for them are included in this Index. Current announcement of newly declassified materials is regularly made in the NACA Research Abstracts and Reclassification Notice. The arrangement of this Index follows: (1) Explanatory chart of NACA publications series designations, (2) outline of subject classification system, (3) chronological list of NACA reports under each subject classification, (4) list of reports declassified from July 1956 through June 1957, (5) alphabetical index to subject categories, and (6) author index. Entries included herein duplicate in part the information of the index cards furnished with the individual research reports. Recipients maintaining card files may wish to discard those index cards on hand for unclassified research reports issued during the July 1956-June 1957 period. Such cards were printed on yellow stock for easy identification in the discard process. Please note that some classified reports issued during the July-December 1956 period are included in the yellow stock area. Therefore care must be taken to avoid destroying such cards. Newly available research reports are currently announced in the NACA Research Abstracts and Reclassification Notice and are normally available for a period of five years after announcement. Most of the older research reports (those issued prior to July 1952) are thus available on a "loan only" basis within the United states.

Recycling of nonmetallics

USGS Publications Warehouse

Amey, E.B.; Kelly, T.D.

1996-01-01

The first factor determining recyclability is the composition of the material itself. Metals, for example, can be reused with little or no loss in quality. Paper and rubber, by this criterion, are less recyclable. Each time paper is recycled, some cellulose fibers are broken. Shorter fibers can mean weaker paper of perceived lower quality and value. Vulcanizing is an irreversible chemical process that precludes recycling rubber in its original form. Both materials may be reused in other applications often of lower value than the original one. To be recyclable, the discarded material must have a collection infrastructure at the source of waste generation, at a central collection site, or at curbside. The recovered material must also have a market. If it is priced noncompetitively or no market exists, if it does not meet specifications, or if it requires special technology investments which cannot be recovered through future sales, the recovered material may be stockpiled or discarded rather than recycled. ?? 1996 International Association for Mathematical Geology.

Kidneys at Higher Risk of Discard: Expanding the Role of Dual Kidney Transplantation

PubMed Central

Tanriover, B.; Mohan, S.; Cohen, D. J.; Radhakrishnan, J.; Nickolas, T. L.; Stone, P. W.; Tsapepas, D. S.; Crew, R. J.; Dube, G. K.; Sandoval, P. R.; Samstein, B.; Dogan, E.; Gaston, R. S.; Tanriover, J. N.; Ratner, L. E.; Hardy, M. A.

2014-01-01

Half of the recovered expanded criteria donor (ECD) kidneys are discarded in the United States. A new kidney allocation system offers kidneys at higher risk of discard, Kidney Donor Profile Index (KDPI) >85%, to a wider geographic area to promote broader sharing and expedite utilization. Dual kidney transplantation (DKT) based on the KDPI is a potential option to streamline allocation of kidneys which otherwise would have been discarded. To assess the clinical utility of the KDPI in kidneys at higher risk of discard, we analyzed the OPTN/UNOS Registry that included the deceased donor kidneys recovered between 2002 and 2012. The primary outcomes were allograft survival, patient survival and discard rate based on different KDPI categories (<80%, 80–90% and >90%). Kidneys with KDPI >90% were associated with increased odds of discard (OR = 1.99, 95% CI 1.74–2.29) compared to ones with KDPI <80%. DKTs of KDPI >90% were associated with lower overall allograft failure (HR = 0.74, 95% CI 0.62–0.89) and better patient survival (HR = 0.79, 95% CI 0.64–0.98) compared to single ECD kidneys with KDPI >90%. Kidneys at higher risk of discard may be offered in the up-front allocation system as a DKT. Further modeling and simulation studies are required to determine a reasonable KDPI cutoff percentile. PMID:24472195

Rethink, Reimagine, Reinvent: The Reggio Emilia Approach to Incorporating Reclaimed Materials in Children's Artworks

ERIC Educational Resources Information Center

Eckhoff, Angela; Spearman, Mindy

2009-01-01

Introducing reclaimed materials into the art classroom provides students with unique opportunities to connect ordinary, discarded objects with unique, personal artistic creations. In an effort to better understand this connection, this article explores existing pedagogical precedents that support the role of the inclusion of reclaimed materials in…

Optimizing Resource and Energy Recovery for Municipal Solid Waste Management

EPA Science Inventory

Significant reductions of carbon emissions and air quality impacts can be achieved by optimizing municipal solid waste (MSW) as a resource. Materials and discards management were found to contribute ~40% of overall U.S. GHG emissions as a result of materials extraction, transpo...

Discarding the Throwaway Society. Worldwatch Paper 101.

ERIC Educational Resources Information Center

Young, John E.

Today's industrial economies were founded on the use of vast quantities of materials and energy, and the economic health of nations has often been equated with the amount they consumed. The amount of materials that originally enters an economy tells nothing about the material's eventual fate or its contribution to human well-being. It tells a good…

Investigation of synergistic effects of warm mix asphalt and high fractionated reclaimed asphalt for safe, environmentally sustainable highway.

DOT National Transportation Integrated Search

2013-11-01

To increase RAP materials by up to 75% by binder replacement, a fractionation method was applied to the RAP stockpile by : discarding RAP materials passing No. 16 sieve. This fractionation method was effective in improving volumetric properties : of ...

Characterization and recovery of copper values from discarded slag.

PubMed

Das, Bisweswar; Mishra, Barada Kanta; Angadi, Shivakumar; Pradhan, Siddharth Kumar; Prakash, Sandur; Mohanty, Jayakrushna

2010-06-01

In any copper smelter large quantities of copper slag are discarded as waste material causing space and environmental problems. This discarded slag contains important amounts of metallic values such as copper and iron. The recovery of copper values from an Indian smelter slag that contains 1.53% Cu, 39.8% Fe and 34.65% SiO(2) was the focus of the present study. A complete investigation of the different phases present in the slag has been carried out by means of optical microscopy, Raman spectroscopy, scanning electron microscopy (SEM), and X-ray diffraction (XRD) techniques. It is observed that iron and silica are mostly associated with the fayalite phase whereas copper is present in both oxide and sulfide phases. These oxide and sulfide phases of copper are mostly present within the slag phase and to some extent the slag is also embedded inside the oxide and sulfide phases. The recovery of copper values from the discarded slag has been explored by applying a flotation technique using conventional sodium isopropyl xanthate (SIX) as the collector. The effects of flotation parameters such as pH and collector concentration are investigated. Under optimum flotation conditions, it is possible to achieve 21% Cu with more than 80% recovery.

A Recycled Giraffe

ERIC Educational Resources Information Center

Diorio, Lucille

1976-01-01

Chicken wire, cardboard tubes, newspaper, scrap lumber and discontinued fabric samples were among the discarded materials used in the art classes at the Webster Hill Elementary School, West Hartford, Connecticut, to create an eight-foot giraffe. (Author/RK)

Weed, Yes! Discard, No! There May Be a Collection in that Trash!

ERIC Educational Resources Information Center

McGowan, Beth

2011-01-01

In the course of a weeding project at a small community college library, librarians discovered an unusual nineteenth century literary collection consisting of many obscure titles written by people of color, women and ethnic minorities. Though the materials were not rare, they constituted an interesting and valuable set of materials. These…

Analysis and Prediction of the Billet Butt and Transverse Weld in the Continuous Extrusion Process of a Hollow Aluminum Profile

NASA Astrophysics Data System (ADS)

Lou, Shumei; Wang, Yongxiao; Liu, Chuanxi; Lu, Shuai; Liu, Sujun; Su, Chunjian

2017-08-01

In continuous extrusions of aluminum profiles, the thickness of the billet butt and the length of the discarded extrudate containing the transverse weld play key roles in reducing material loss and improving product quality. The formation and final distribution of the billet butt and transverse weld depend entirely on the flow behavior of the billet skin material. This study examined the flow behavior of the billet skin material as well as the formation and evolution of the billet butt and the transverse weld in detail through numerical simulation and a series of experiments. In practical extrusions, even if the billet skin is removed by lathe turning shortly before extrusion, billet skin impurities are still distributed around the transverse weld and in the billet butt. The thickness of the scrap billet butt and the length of the discarded extrudate containing the transverse weld can be exactly predicted via simulation.

From discard ban to exemption: How can gear technology help reduce catches of undersized Nephrops and hake in the Bay of Biscay trawling fleet?

PubMed

Vogel, Camille; Kopp, Dorothée; Méhault, Sonia

2017-01-15

On January 1st, 2016, the French mixed Nephrops and hake fishery of the Grande Vasière, an area located in the Bay of Biscay, fell under the discard ban implemented as part of the new European Common Fisheries Policy. The fleet records historically high levels of discard despite numerous gear selectivity studies. Together with high discards survival, new technological solutions to minimize catches of undersized individuals could justify local exemptions from the discard ban. Our study focuses on the effects of two selective devices, a square mesh cylinder (SMC) and a grid, on the escapement of undersized individuals and discard reduction. Relative catch probability of the modified gear compared with the traditional gear was modelled using the catch comparison method. Potential losses from the commercial fraction of the catch were taken into account to assess their influence on the economic viability of fishing with the modified gears. The two devices had similar effects on undersized Nephrops escapement and on discard reduction, with median values of 26.5% and 23.6% for the SMC and of 30.4% and 21.4% for the grid, respectively. Only the grid was efficient for undersized hake, recording median values of escapement and discard reduction equal to 25.0% and 20.6%, respectively. Some loss from the commercial fraction of the catch was to be expected with both devices, which could be compensated for in the long term by the contribution of undersized individuals to the stock biomass. Our results support the use of selective gears technology as part of an integrated framework including control and management measures to mitigate the effect of the discard ban both for fishers and for the ecosystem. Further work is needed to quantify the effect of additional escapement from the gear on stock dynamics. Copyright © 2016 Elsevier Ltd. All rights reserved.

78 FR 21584 - Atlantic Highly Migratory Species; 2013 Atlantic Bluefin Tuna Quota Specifications

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-11

... FMP). The 1999 FMP included a framework process to promulgate annual specifications for the BFT... percent of the 948.7-mt total U.S. quota). Accounting for Dead Discards The United States must report BFT... specifications. Accounting for dead discards in the Longline category in this way may provide further incentive...

40 CFR 240.101 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

...) Solid wastes means garbage, refuse, sludges, and other discarded solid materials resulting from... common water pollutants. (z) Special wastes means nonhazardous solid wastes requiring handling other than... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES GUIDELINES FOR THE THERMAL...

41 CFR 101-27.204 - Types of shelf-life items.

Code of Federal Regulations, 2012 CFR

2012-07-01

... storage life after which the item or material is considered to be no longer usable for its primary function and should be discarded. Type II items are those for which successive reinspection dates can be...

40 CFR 401.11 - General definitions.

Code of Federal Regulations, 2012 CFR

2012-07-01

..., radioactive materials, heat, wrecked or discarded equipment, rock, sand, cellar dirt and industrial, municipal... interstate commerce; and intrastate lakes, rivers, and streams which are utilized for industrial purposes by..., person, territorial seas, contiguous zone, biological monitoring, schedule of compliance, and industrial...

40 CFR 401.11 - General definitions.

Code of Federal Regulations, 2013 CFR

2013-07-01

..., radioactive materials, heat, wrecked or discarded equipment, rock, sand, cellar dirt and industrial, municipal... interstate commerce; and intrastate lakes, rivers, and streams which are utilized for industrial purposes by..., person, territorial seas, contiguous zone, biological monitoring, schedule of compliance, and industrial...

40 CFR 401.11 - General definitions.

Code of Federal Regulations, 2014 CFR

2014-07-01

..., radioactive materials, heat, wrecked or discarded equipment, rock, sand, cellar dirt and industrial, municipal... interstate commerce; and intrastate lakes, rivers, and streams which are utilized for industrial purposes by..., person, territorial seas, contiguous zone, biological monitoring, schedule of compliance, and industrial...

Unharvested fishes in the U. S. commercial fishery of western Lake Erie in 1969

USGS Publications Warehouse

Van Meter, Harry D.

1973-01-01

Potential commercial fish production was estimated for U.S. waters of western Lake Erie in 1969 from pounds landed and pounds discarded. Periodic observations of catches in haul seines and trap nets revealed that about 37% of the catch (by weight) in haul seines and 26% of that in trap nets were low-value fishes that were discarded. Projection of these discarded catches to include the total fishing effort indicated that an additional 2.8 million lb of low-value species would have been landed in 1969 if a reasonable profit had been assured. It is concluded that the sustained yield could be increased considerably with only a moderate increase in fishing effort.

A Re-evaluation of Discarded Deceased Donor Kidneys in the UK: Are Usable Organs Still Being Discarded?

PubMed

Mittal, Shruti; Adamusiak, Anna; Horsfield, Catherine; Loukopoulos, Ioannis; Karydis, Nikolaos; Kessaris, Nicos; Drage, Martin; Olsburgh, Jonathon; Watson, Christopher Je; Callaghan, Chris J

2017-07-01

A significant proportion of procured deceased donor kidneys are subsequently discarded. The UK Kidney Fast-Track Scheme (KFTS) was introduced in 2012, enabling kidneys at risk of discard to be simultaneously offered to participating centers. We undertook an analysis of discarded kidneys to determine if unnecessary organ discard was still occurring since the KFTS was introduced. Between April and June 2015, senior surgeons independently inspected 31 consecutive discarded kidneys from throughout the United Kingdom. All kidneys were biopsied. Organs were categorized as usable, possibly usable pending histology, or not usable for implantation. After histology reports were available, final assessments of usability were made. There were 19 donors (6 donations after brain death, 13 donations after circulatory death), with a median (range) donor age of 67 (29-83) years and Kidney Donor Profile Index of 93 (19-100). Reasons for discard were variable. Only 3 discarded kidneys had not entered the KFTS. After initial assessment postdiscard, 11 kidneys were assessed as usable, with 9 kidneys thought to be possibly usable. Consideration of histological data reduced the number of kidneys thought usable to 10 (10/31; 32%). The KFTS scheme is successfully identifying organs at high risk of discard, though potentially transplantable organs are still being discarded. Analyses of discarded organs are essential to identify barriers to organ utilization and develop strategies to reduce unnecessary discard.

Gold recycling in the United States in 1998

USGS Publications Warehouse

Amey, Earle B.

2001-01-01

In 1998, 175 metric tons (t) of refined gold was recovered by U.S. refiners from old and new scrap. The overall recycling rate was 29 percent when scrap consumption was compared with apparent domestic supply. Sources of old scrap includes discarded jewelry, dental materials, plating solutions, and electronic equipment. A very high old scrap recycling efficiency of 96 percent was reached in 1998, the supply of old scrap peaked, gold prices were at an 18-year low, and substantial amounts of old scrap were exported. U.S. net exports of old scrap had a gold content of 28 t.

recycle, replenish, reSTORE

ERIC Educational Resources Information Center

Lansburgh, Therese

1976-01-01

Describes projects of the Maryland Committee for the Day Care of Children aimed at cutting day care costs: a recycling center for discarded industrial materials that can be put to educational uses, and workshops for teachers and volunteers in preschool and day care programs. (ED)

Converting Alaska fish byproducts into compost: a review

USDA-ARS?s Scientific Manuscript database

Alaska's commercial fishing industry, sportfishing and susbsistence fisheries generate over one million metric tons of processing waste each year. Composting is a practical alternative for salvaging some of these discarded materials. Rural and remote coastal communities can benefit from these source...

Converting Alaska Fish Byproducts into Compost

USDA-ARS?s Scientific Manuscript database

Alaska’s commercial fishing industry, sportfishing and subsistence fisheries generate over one million metric tons of processing waste each year. Composting is a practical alternative for salvaging some of these discarded materials. Rural and remote coastal communities can benefit from these sources...

Recovering Zinc From Discarded Tires

NASA Technical Reports Server (NTRS)

Du Fresne, E. R.

1984-01-01

Zinc sulfate monohydrate sold at profit. Shredded tire material steeped in three sulfuric acid baths to extract zinc. Final product removed by evaporating part of solution until product crystallizes out. Recovered as zinc sulfate monohydrate and sold as fertilizer or for general use.

Behavioral and Emotional Consequences of Thought Listing versus Cognitive Restructuring during Discarding Decisions in Hoarding Disorder

PubMed Central

Frost, Randy O.; Ong, Clarissa; Steketee, Gail; Tolin, David F.

2016-01-01

An essential criterion for hoarding disorder (HD) is difficulty discarding or parting with possessions, yet few studies have examined reactions to actual discarding behaviors. The present study examined whether individuals with HD differed from non-hoarding community controls (CC) in discarding behavior and emotional reactions to discarding. A second purpose was to examine the course of experienced distress following discarding. A third purpose was to determine whether HD participants responded differently to a simple thought listing (TL) instruction or to a cognitive restructuring (CR) protocol. Participants were asked to decide whether to keep or discard (a) a personal possession and (b) a newly acquired object (magazine). HD participants anticipated more and longer distress and reported stronger attachment motives than community controls, but they did not differ significantly from community controls in actual discarding behavior. TL was somewhat more effective than CR in improving discarding behavior and reducing negative emotions and attachments to discarded objects among HD participants. Reductions in distress were observed for both HD-TL and HD-CR groups. Thought listing may have reduced avoidance of decision-making about discarding or perhaps CR, but not TL, provoked therapeutic reactance. Discarding was not related to reductions in distress or hoarding-related beliefs. PMID:27537707

Economic benefits of improved insulin stability in insulin pumps.

PubMed

Weiss, Richard C; van Amerongen, Derek; Bazalo, Gary; Aagren, Mark; Bouchard, Jonathan R

2011-05-01

Insulin pump users discard unused medication and infusion sets according to labeling and manufacturer's instructions. The stability labeling for insulin aspart (rDNA origin] (Novolog) was increased from two days to six. The associated savings was modeled from the perspective of a hypothetical one-million member health plan and the total United States population. The discarded insulin volume and the number of infusion sets used under a two-day stability scenario versus six were modeled. A mix of insulin pumps of various reservoir capacities with a range of daily insulin dosages was used. Average daily insulin dose was 65 units ranging from 10 to 150 units. Costs of discarded insulin aspart [rDNA origin] were calculated using WAC (Average Wholesale Price minus 16.67%). The cost of pump supplies was computed for the two-day scenario assuming a complete infusion set change, including reservoirs, every two days. Under the six-day scenario complete infusion sets were discarded every six days while cannulas at the insertion site were changed midway between complete changes. AWP of least expensive supplies was used to compute their costs. For the hypothetical health plan (1,182 pump users) the annual reduction in discarded insulin volume between scenarios was 19.8 million units. The corresponding cost reduction for the plan due to drug and supply savings was $3.4 million. From the U.S. population perspective, savings of over $1 billion were estimated. Using insulin that is stable for six days in pump reservoirs can yield substantial savings to health plans and other payers, including patients.

OPTN/SRTR 2012 Annual Data Report: deceased organ donation.

PubMed

Israni, A K; Zaun, D; Rosendale, J D; Snyder, J J; Kasiske, B L

2014-01-01

The status of deceased organ donation is assessed using several metrics, including donation/conversion rate (how often at least one organ is recovered for transplant from an eligible death), organ yield (ratio of observed/expected numbers of organs transplanted), and rate of organs discarded (number of organs discarded divided by the number of organs recovered for transplant). The 2012 donation/conversion rate was 72.5. eligible donors per 100 eligible deaths, slightly lower than the 2011 rate but higher than in previous years. The 2011-2012 yield ratio varied by donation service area from 0.91 (fewer organs transplanted per donor than expected) to 1.09 (more than expected), and also varied for specific organs. The mean number of organs transplanted per donor in 2012 was 3.02, lower than in 2011 and 2010; this number varied by donation service area from 2.04 to 3.76. The number of organs discarded is calculated by subtracting the number of organs transplanted from the number recovered for transplant; this number is used to calculate the discard rate. The discard rate in 2012 for all organs combined was 0.14 per recovered organ, slightly higher than in 2011 and 2011; it varied by donation service area and organ type. © Copyright 2013 The American Society of Transplantation and the American Society of Transplant Surgeons.

Feeding on toxic prey. The praying mantis (Mantodea) as predator of poisonous butterfly and moth (Lepidoptera) caterpillars.

PubMed

Mebs, Dietrich; Wunder, Cora; Pogoda, Werner; Toennes, Stefan W

2017-06-01

Caterpillars of the monarch butterfly, Danaus plexippus, feed on milkweed plants, Asclepias spp. (Apocynaceae), and sequester their toxic cardenolides aimed at deterring predators. Nevertheless, Chinese praying mantids, Tenodera sinensis, consume these caterpillars after removing the midgut ("gutting") including its plant content. In the present study, monarch caterpillars raised on A. curassavica, and those of the death's-head hawkmoth, Acherontia atropos, raised on Atropa belladonna containing atropine, were fed to mantids, Hierodula membranacea, which removed the gut of both species discarding about 59% of cardenolides and more than 90% of atropine, respectively. The ingestion of these compounds produced no apparent ill effects in the mantids and both were excreted with faeces. On the other hand, when mantids were fed with larvae of two moth species, Amata mogadorensis and Brahmaea certia, raised on non-poisonous host plants, the mantids showed the same gutting behaviour, thereby discarding indigestible plant material. As polar compounds, e.g. cardenolides and atropine, are not absorbed from the mantids midgut and do not pass the gut membrane, this enables the mantids to feed on toxic prey. Copyright © 2017 Elsevier Ltd. All rights reserved.

40 CFR 241.2 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... manner that adequately prevents releases or other hazards to human health and the environment considering... subdivision of a state, or any interstate body. Processing means any operations that transform discarded non.... Minimal operations that result only in modifying the size of the material by shredding do not constitute...

A Model for Determining Modular Heat Recovery Incinerator Feasibility on Air Force Installations.

DTIC Science & Technology

1992-09-01

INCINERATOR FEASIBILITY ON AIR FORCE INSTALLATIONS THESIS Presented to the Faculty of the School of Engineering of the Air Force Institute of Technology...commer- cial, (and) institutional discards...not (including] industrial process or manufacturing discards, segre- gated medical waste, or construction...have "... particular 11 value as an additive to an existing steam system, such as a central heating plant for an institution " (46:E-26). Exam- ples

Early upper paleolithic shell beads at Üçağızlı Cave I (Turkey): technology and the socioeconomic context of ornament life-histories.

PubMed

Stiner, Mary C; Kuhn, Steven L; Güleç, Erksin

2013-05-01

Ten early Upper Paleolithic layers in Üçağızlı Cave I (41-29 uncalibrated ky BP) on the Hatay coast of southern Turkey preserve a rich and varied record of early Upper Paleolithic life, including the production and use of large numbers of shell ornaments. This study examines shell bead production, use, and discard in relation to site function and the diversity of on-site human activities. Four factors are expected to contribute to variation in the ornament assemblages, one environmental and three behavioral. The behavioral factors relate to winnowing for quality as a function of distance from the raw material source, changes in the size of user groups, and symbol standardization. The accumulation rates for shell beads, bones, and stone tools paralleled one another through time, indicating that ornament discard followed the pulse of daily life at this site. All stages of manufacture and use are well represented in each assemblage, and half or more of the ornaments show evidence of extended use. Changes in the local marine environment do not explain much of the variation in the assemblages, pointing instead to behavioral causes. The richness of shell types that were collected as raw material correlates to greater exploitation of edible marine shellfish and greater occupation intensity. Much of this variation in the ornament raw material was eliminated during the manufacture stage, almost certainly reflecting the influence of cultural norms. A focus on basket-shaped shells changed remarkably little over thousands of years, despite significant changes in other domains of technology. This last result suggests that beads were the most irreducible and conservative elements of more complex design traditions. Copyright © 2013 Elsevier Ltd. All rights reserved.

Arts & Crafts for Everyone.

ERIC Educational Resources Information Center

Crane, Diane, Ed.

1982-01-01

Five different art activities, using different media, are described: (1) "mystery molds," using plaster and discarded packaging materials; (2) "calico cottages," using boxes and fabric; (3) "foam friends," using plastic foam packing pieces; (4) "bauble boxes," using spray can tops and papier mache; and (5) "soft stuff," using old clothing. (CJ)

Development of an alternate pathway for materials destined for disposition to WIPP

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ayers, Georgette Y; Mckerley, Bill; Veazey, Gerald W

2010-01-01

The Los Alamos National Laboratory currently has an inventory of process residues that may be viable candidates for disposition to the Waste Isolation Pilot Project (WIPP) located at Carlsbad, New Mexico. A recent 'Attractiveness Level D' exemption allows for the discard of specified intractable materials regardless of the percent plutonium. However, the limits with respect to drum loadings must be met. Cementation is a key component of the aqueous nitrate flowsheet and serves as a 'bleed-off' stream for impurities separated from the plutonium during processing operations. The main 'feed' to the cementation operations are the 'bottoms' from the evaporation process.more » In the majority of cases, the cemented bottoms contain less than the allowed amount per drum for WIPP acceptance. This project would expand the route to WIPP for items that have no defined disposition path, are difficult to process, have been through multiple passes, have no current recovery operations available to recover the plutonium and that are amenable to cementation. This initial work will provide the foundation for a full scale disposition pathway of the candidate materials. Once the pathway has been expanded and a cementation matrix developed, routine discard activities will be initiated.« less

To Err Is Human; To Structurally Prime from Errors Is Also Human

ERIC Educational Resources Information Center

Slevc, L. Robert; Ferreira, Victor S.

2013-01-01

Natural language contains disfluencies and errors. Do listeners simply discard information that was clearly produced in error, or can erroneous material persist to affect subsequent processing? Two experiments explored this question using a structural priming paradigm. Speakers described dative-eliciting pictures after hearing prime sentences that…

Sustainable Materials Management (SMM) Web Academy Webinar: Taking on Takeout Waste: New Approaches in New York City

EPA Pesticide Factsheets

It is estimated that nationally, over 76 million tons of containers and packaging make up the largest portion of municipal solid waste generated, and 39 percent of those discards are sent to landfills. While the specific statistics on takeout waste tonnage

"Gold Is Every Man's Opportunity": Castration Anxiety and the Economic Venture in "Deadwood"

ERIC Educational Resources Information Center

Wiggins, Kyle; Holmberg, David

2007-01-01

David Milch, creator of HBO's critically acclaimed Western series, "Deadwood," said, "The only reason the town of Deadwood exists is gold." Milch bluntly discards the Western genre's foundational ideology of self-determination, considering these principles a delusion that obscures the material realities of the late nineteenth…

A Priceless Playground for Exceptional Children.

ERIC Educational Resources Information Center

Adkins, Patricia G.

Described are 20 pieces of therapeutic playground equipment constructed by volunteers and fathers of children in the Early Learning Center for Exceptional Children (El Paso, Texas). It is noted that discarded and readily available materials (such as old tires) were used, and that no commercial playground equipment was purchased. Information on the…

Litter Prevention & Recycling. Ohio Science Workbook: 1987 Edition

ERIC Educational Resources Information Center

Elfner, Lynn Edward, Ed.

Every active family and business produces solid waste, some of which are the nonhazardous discards of society. Taken as individual substances, our newspapers, food leftovers, containers and wrappings, grass clippings and tree limbs seem harmless enough. But huge volumes of these materials are generated daily. It has been projected that many…

Seabird use of discards from a nearshore shrimp fishery in the South Atlantic Bight, USA

USGS Publications Warehouse

Jodice, Patrick G.R.; Wickliffe, Lisa C.; Sachs, Elena B.

2011-01-01

Shrimp trawling is common throughout the southeastern and Gulf of Mexico coasts of the USA and is the primary contributor to fisheries discards in these regions. Tens of thousands of nearshore seabirds nest near shrimp trawling grounds in the USA, but to date, there has been no assessment of the relationship between seabirds and shrimp trawlers. We examined the taxonomic composition of bycatch, rate at which seabirds scavenged bycatch, and energy density of discarded bycatch in a nearshore commercial shrimp fishery. Bycatch was primarily comprised of demersal fish that are not typically accessible to the plunge-diving and surface-feeding seabirds that occur in the area. Hence, seabird diets in the region appear to be broadened taxonomically by the availability of discards. Results from discard experiments indicated that 70% of the nearly 5,500 items discarded by hand were scavenged by seabirds and that the fate of a discarded item was most strongly predicted by its taxonomic order. Laughing gulls scavenged the greatest proportion of discards, although brown pelicans were the only species to scavenge more discards than predicted based upon their abundance. Because this is the first such study in the region, it is difficult to ascertain the extent or intensity of the impact that discards have on nearshore seabirds. Nonetheless, our results suggest that it will be difficult for managers to clearly understand fluctuations in local seabird population dynamics without first understanding the extent to which these species rely upon discards. This may be especially problematic in situations where seabird populations are recovering following natural or anthropogenic stressors.

Computerized LCC/ORLA methodology. [Life cycle cost/optimum repair level analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Henderson, J.T.

1979-01-01

The effort by Sandia Laboratories in developing CDC6600 computer programs for Optimum Repair Level Analysis (ORLA) and Life Cycle Cost (LCC) analysis is described. Investigation of the three repair-level strategies referenced in AFLCM/AFSCM 800-4 (base discard of subassemblies, base repair of subassemblies, and depot repair of subassemblies) was expanded to include an additional three repair-level strategies (base discard of complete assemblies and, upon shipment of complete assemblies to the depot, depot repair of assemblies by subassembly repair, and depot repair of assemblies by subassembly discard). The expanded ORLA was used directly in an LCC model that was procedurally altered tomore » accommodate the ORLA input data. Available from the LCC computer run was an LCC value corresponding to the strategy chosen from the ORLA. 2 figures.« less

Power partial-discard strategy to obtain improved performance for simulated moving bed chromatography.

PubMed

Chung, Ji-Woo; Kim, Kyung-Min; Yoon, Tae-Ung; Kim, Seung-Ik; Jung, Tae-Sung; Han, Sang-Sup; Bae, Youn-Sang

2017-12-22

A novel power partial-discard (PPD) strategy was developed as a variant of the partial-discard (PD) operation to further improve the separation performance of the simulated moving bed (SMB) process. The PPD operation varied the flow rates of discard streams by introducing a new variable, the discard amount (DA) as well as varying the reported variable, discard length (DL), while the conventional PD used fixed discard flow rates. The PPD operations showed significantly improved purities in spite of losses in recoveries. Remarkably, the PPD operation could provide more enhanced purity for a given recovery or more enhanced recovery for a given purity than the PD operation. The two variables, DA and DL, in the PPD operation played a key role in achieving the desired purity and recovery. The PPD operations will be useful for attaining high-purity products with reasonable recoveries. Copyright © 2017 Elsevier B.V. All rights reserved.

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

Inspired by human forgetfulness – how our brains discard unnecessary data to make room for new information – scientists at the U.S. Department of Energy’s (DOE) Argonne National Laboratory, in collaboration with Brookhaven National Laboratory and three universities, conducted a recent study that combined supercomputer simulation and X-ray characterization of a material that gradually “forgets.”

Applied manure research—looking forward to the benign roles of animal manure in agriculture and the environment

USDA-ARS?s Scientific Manuscript database

By definition, animal manure is discarded animal excreta and bedding materials usually applied to soils as a fertilizer for agricultural production. However, the impact of manure generation and disposal is far more than the role of organic fertilizers, even though the fertilizer function of animal m...

Application of leftover sample material from waterborne protozoa monitoring for the molecular detection of Bacteroidales and fecal source tracking markers

EPA Science Inventory

In this study, we examined the potential for detecting fecal bacteria and microbial source tracking markers in samples discarded during the concentration of Cryptosporidium and Giardia using USEPA Method 1623. Recovery rates for different fecal bacteria were determined using sp...

48 CFR 52.223-9 - Estimate of Percentage of Recovered Material Content for EPA-Designated Items.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 2 2011-10-01 2011-10-01 false Estimate of Percentage of... Regulations System FEDERAL ACQUISITION REGULATION (CONTINUED) CLAUSES AND FORMS SOLICITATION PROVISIONS AND... has been discarded for disposal or recovery, having completed its life as a consumer item...

48 CFR 52.223-9 - Estimate of Percentage of Recovered Material Content for EPA-Designated Items.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 2 2010-10-01 2010-10-01 false Estimate of Percentage of... Regulations System FEDERAL ACQUISITION REGULATION (CONTINUED) CLAUSES AND FORMS SOLICITATION PROVISIONS AND... has been discarded for disposal or recovery, having completed its life as a consumer item...

High-performance green flexible electronics based on biodegradable cellulose nanofibril paper

Treesearch

Yei Hwan Jung; Tzu-Hsuan Chang; Huilong Zhang; Chunhua Yao; Qifeng Zheng; Vina W. Yang; Hongyi Mi; Munho Kim; Sang June Cho; Dong-Wook Park; Hao Jiang; Juhwan Lee; Yijie Qiu; Weidong Zhou; Zhiyong Cai; Shaoqin Gong; Zhenqiang Ma

2015-01-01

Today’s consumer electronics, such as cell phones, tablets and other portable electronic devices, are typically made of non-renewable, non-biodegradable, and sometimes potentially toxic (for example, gallium arsenide) materials. These consumer electronics are frequently upgraded or discarded, leading to serious environmental contamination. Thus, electronic systems...

76 FR 69137 - Atlantic Highly Migratory Species; Atlantic Bluefin Tuna Fisheries

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-08

... 200 mt or more may remain unused). NMFS will need to account for 2011 BFT landings and dead discards... landings and dead discards within the total 2011 U.S. quota once the dead discard information is available, NMFS' best estimates of current dead discards and quota that will remain unused indicate that the risk...

Lathe tool bit and holder for machining fiberglass materials

NASA Technical Reports Server (NTRS)

Winn, L. E. (Inventor)

1972-01-01

A lathe tool and holder combination for machining resin impregnated fiberglass cloth laminates is described. The tool holder and tool bit combination is designed to accommodate a conventional carbide-tipped, round shank router bit as the cutting medium, and provides an infinite number of cutting angles in order to produce a true and smooth surface in the fiberglass material workpiece with every pass of the tool bit. The technique utilizes damaged router bits which ordinarily would be discarded.

Shedding light on the association between repetitive negative thinking and deficits in cognitive control - A meta-analysis.

PubMed

Zetsche, Ulrike; Bürkner, Paul-Christian; Schulze, Lars

2018-06-11

Individuals who experience recurrent negative thoughts are at elevated risk for mood and anxiety disorders. It is thus essential to understand why some individuals get stuck in recurrent negative thinking (RNT), whereas others are able to disengage eventually. Theoretical models propose that individuals high in recurrent negative thinking suffer from deficits in controlling the contents of working memory. Empirical findings, however, are inconclusive. In this meta-analysis, we synthesize findings from 94 studies to examine the proposed association between RNT and deficits in cognitive control. We included numerous effect sizes not reported in the primary publications. Moderator analyses tested the influence of variables, such as stimuli valence, cognitive control function (e.g., shifting, discarding), or type of RNT (i.e., rumination or worry). Results demonstrated an association between repetitive negative thinking and deficits in only one specific cognitive control function, namely difficulty discarding no longer relevant material from working memory (r = -0.20). This association remained significant after controlling for level of psychopathology. There was no substantial association between RNT and deficits in any other cognitive control function. All other moderators were not significant. We discuss limitations (e.g., primary sample sizes, reliability of paradigms) and highlight implications for future research and clinical interventions. Copyright © 2018 Elsevier Ltd. All rights reserved.

Recovery and disposal of discarded tires in the Taiwan area.

PubMed

Hwang, J S; Roam, G D

1994-12-01

Urbanization and industrialization has resulted in a vast amount of artificial water containers in Taiwan, especially discarded automobile tires. 3.5 million automobile tires and several million motorcycle tires are discarded annually. The discarded tires contaminate the environment and also become a substantial number of breeding sites for the dengue vector mosquitoes. In order to establish a sound system for the recovery and disposal of discarded tires and to control dengue fever through source reduction, it has been emphasized that users must pay for their waste. It is necessary to recover and properly dispose of these discarded tired. The commercial firms which sell or manufacture tires are therefore advised to cooperate with the Environmental Protection Administration of the Executive Yuan, R.O.C. and follow the "Regulations of Recovery and Disposal of Discarded Tires". They are requested to establish foundations for the recovery of discarded tires. Those who are willing to join should prepay a deposit or related charge by the size of tire, which is imported or locally manufactured. The foundation utilizes the deposits for the recovery and disposal of discarded tires. From 1991 to 1993 the commercial tire firms had already achieved the 80% recovery rates declared by the authorities concerned. Some of the tires, after having been recovered, were recycled in the original form and the rest were cut into small pieces for recycling after physical treatment. It should be mentioned that the Department of Environmental Protection of Kaohsiung City has collected 80 thousand discarded automobile tires to be used as ocean jetty.(ABSTRACT TRUNCATED AT 250 WORDS)

Shrimp trawlers as a local attractor of seabirds in nearshore waters of South Carolina, USA

USGS Publications Warehouse

Jodice, Patrick G.R.; Wickliffe, Lisa C.; Sachs, Elena B.

2011-01-01

Shrimp trawling is common throughout the southeastern and Gulf of Mexico coasts of the USA and is the primary contributor to fisheries discards in these regions. Tens of thousands of nearshore seabirds nest near shrimp trawling grounds in the USA, but to date, there has been no assessment of the relationship between seabirds and shrimp trawlers. We examined the taxonomic composition of bycatch, rate at which seabirds scavenged bycatch, and energy density of discarded bycatch in a nearshore commercial shrimp fishery. Bycatch was primarily comprised of demersal fish that are not typically accessible to the plunge-diving and surface-feeding seabirds that occur in the area. Hence, seabird diets in the region appear to be broadened taxonomically by the availability of discards. Results from discard experiments indicated that 70% of the nearly 5,500 items discarded by hand were scavenged by seabirds and that the fate of a discarded item was most strongly predicted by its taxonomic order. Laughing gulls scavenged the greatest proportion of discards, although brown pelicans were the only species to scavenge more discards than predicted based upon their abundance. Because this is the first such study in the region, it is difficult to ascertain the extent or intensity of the impact that discards have on nearshore seabirds. Nonetheless, our results suggest that it will be difficult for managers to clearly understand fluctuations in local seabird population dynamics without first understanding the extent to which these species rely upon discards. This may be especially problematic in situations where seabird populations are recovering following natural or anthropogenic stressors.

Simple method for preparation of nanostructurally organized spines of sand dollar Scaphechinus mirabilis (Agassiz, 1863).

PubMed

Ehrlich, Herman; Elkin, Yury N; Artoukov, Alexandr A; Stonik, Valentin A; Safronov, Peter P; Bazhenov, Vasily V; Kurek, Denis V; Varlamov, Valery P; Born, René; Meissner, Heike; Richter, Gert

2011-06-01

Unique skeletal formations of marine invertebrates, including representatives of Echinodermata, have the unique potential to serve as templates for bio-inspired materials chemistry, biomimetics, and materials science. The sand dollar Scaphechinus mirabilis (Agassiz, 1983) is widely distributed in the northwest of the Pacific Ocean from southern Japan to the Aleutian Islands. This animal is the main source of naphtochinone-based substances. These compounds have recently drawn medical attention for their use as cardiological and ophthalmological drugs. Unfortunately, after extraction of the naphtochinones, the residual skeletons and spines of the sand dollars were usually discarded. Here, we report the first method for the preparation of nanostructurally organized spines of S. mirabilis, using a simple enzymatic and hydrogen peroxide-based treatment. Application of this method opens the way for development of non-wasteful environmentally clean technology of sand dollars as well-known industrial marine invertebrates.

Epidemiology of Kidney Discard from Expanded Criteria Donors Undergoing Donation after Circulatory Death.

PubMed

Singh, Sunita K; Kim, S Joseph

2016-02-05

The broader use of combined expanded criteria donor and donation after circulatory death (ECD/DCD) kidneys may help expand the deceased donor pool. The purpose of our study was to evaluate discard rates of kidneys from ECD/DCD donors and factors associated with discard. ECD/DCD donors and kidneys were evaluated from January 1, 2000 to March 31, 2011 using data from the Scientific Registry of Transplant Recipients. The kidney donor risk index was calculated for all ECD/DCD kidneys. Multivariable logistic regression models were used to determine risk factors for discarding both donor kidneys. The Kaplan-Meier product limit method and the log-rank statistic were used to assess the cumulative probability of graft failure for transplants from ECD/DCD donors where the mate kidney was discarded versus both kidneys were used. There were 896 ECD/DCD donors comprising 1792 kidneys. Both kidneys were discarded in 44.5% of donors, whereas 51.0% of all available kidneys were discarded. The kidney donor risk index scores were higher among donors of discarded versus transplanted kidneys (median, 1.82; interquartile range, 1.60, 2.07 versus median, 1.67; interquartile range, 1.49, 1.87, respectively; P<0.001); however, the distributions showed considerable overlap. The adjusted odds ratios for discard were higher among donors who were older, diabetic, AB blood type, and hepatitis C positive. The cumulative probabilities of total graft failure at 1, 3, and 5 years were 17.3%, 36.5%, and 55.4% versus 13.8%, 24.7%, and 40.5% among kidneys from donors where only one versus both kidneys were transplanted, respectively (log rank P=0.04). Our study shows a significantly higher discard rate for ECD/DCD kidneys versus prior reports. Some discarded ECD/DCD kidneys may be acceptable for transplantation. Additional studies are needed to evaluate the factors that influence decision making around the use of ECD/DCD kidneys. Copyright © 2016 by the American Society of Nephrology.

Epidemiology of Kidney Discard from Expanded Criteria Donors Undergoing Donation after Circulatory Death

PubMed Central

Singh, Sunita K.

2016-01-01

Background and objectives The broader use of combined expanded criteria donor and donation after circulatory death (ECD/DCD) kidneys may help expand the deceased donor pool. The purpose of our study was to evaluate discard rates of kidneys from ECD/DCD donors and factors associated with discard. Design, setting, participants, & measurements ECD/DCD donors and kidneys were evaluated from January 1, 2000 to March 31, 2011 using data from the Scientific Registry of Transplant Recipients. The kidney donor risk index was calculated for all ECD/DCD kidneys. Multivariable logistic regression models were used to determine risk factors for discarding both donor kidneys. The Kaplan–Meier product limit method and the log-rank statistic were used to assess the cumulative probability of graft failure for transplants from ECD/DCD donors where the mate kidney was discarded versus both kidneys were used. Results There were 896 ECD/DCD donors comprising 1792 kidneys. Both kidneys were discarded in 44.5% of donors, whereas 51.0% of all available kidneys were discarded. The kidney donor risk index scores were higher among donors of discarded versus transplanted kidneys (median, 1.82; interquartile range, 1.60, 2.07 versus median, 1.67; interquartile range, 1.49, 1.87, respectively; P<0.001); however, the distributions showed considerable overlap. The adjusted odds ratios for discard were higher among donors who were older, diabetic, AB blood type, and hepatitis C positive. The cumulative probabilities of total graft failure at 1, 3, and 5 years were 17.3%, 36.5%, and 55.4% versus 13.8%, 24.7%, and 40.5% among kidneys from donors where only one versus both kidneys were transplanted, respectively (log rank P=0.04). Conclusions Our study shows a significantly higher discard rate for ECD/DCD kidneys versus prior reports. Some discarded ECD/DCD kidneys may be acceptable for transplantation. Additional studies are needed to evaluate the factors that influence decision making around the use of ECD/DCD kidneys. PMID:26668028

Increasing of the lifetime of large forging dies by repairwelding

NASA Astrophysics Data System (ADS)

Duchek, M.; Koukolikova, M.; Kotous, J.; Majer, M.

2018-02-01

Repair welding is often used for rebuilding discarded or failed forging dies. It saves the cost of new tools. Increased useful life of repaired dies is another motivation for repair welding. This article focuses on the development of new filler materials for this purpose. The main goal was to prolong the life of tools of DIN 1.2714 material. Filler wires of two chemistries were made and several samples were experimentally welded. Metallographic and tribological analyses were carried out.

Development of Igbo Language E-Learning System

ERIC Educational Resources Information Center

Oyelami, Olufemi Moses

2008-01-01

E-Learning involves using a variety of computer and networking technologies to access training materials. The United Nations report, quoted in one of the Nigerian dailies towards the end of year 2006, says that most of the minor languages in the world would be extinct by the year 2050. African languages are currently suffering from discard by…

Don't Throw It Away!: Raise Recycling Awareness through Communications Project

ERIC Educational Resources Information Center

Lazaros, Edward J.; Shackelford, Ray

2008-01-01

Americans discard a huge amount of material everyday. The activity described in this article--determining how much waste is thrown out or recycled in the school cafeteria over a five-day period--dramatically increases students' awareness of this fact of contemporary life. Armed with the information they've gathered, students go on to the…

IMPROVIDING SUSTAINABILITY IN METALLIC MATERIALS THROUGH REDUCTION OF WASTES DISCARDED TO THE ENVIRONMENT BY RECOVERY AND REUSE IN EXTRACTION AND FABRICATION INDUSTRIES

EPA Science Inventory

Designed to chronicle the pollution problem occurring at one of the world's largest Superfund sites and to address the potential of the application of the approach of the recovery of metal resources occurring in the acid mine drainage causing the pollution problem. Acid mine drai...

Material flows generated by pyromet copper smelting

USGS Publications Warehouse

Goonan, T.G.

2005-01-01

Copper production through smelting generates large volumes of material flows. As copper contained in ore becomes copper contained in concentrate to be fed into the smelting process, it leaves behind an altered landscape, sometimes mine waste, and always mill tailings. Copper concentrate, fluxing materials, fuels, oxygen, recyclables, scrap and water are inputs to the process. Dust (recycled), gases - containing carbon dioxide (CO2) (dissipated) and sulfur dioxide (SO2) (mostly collected, transformed and sold) and slag (discarded or sold) - are among the significant process outputs. This article reports estimates of the flows of these input/output materials for a particular set of smelters studied in some countries.

Don't Throw Away Syringes!

ERIC Educational Resources Information Center

John, E.

1975-01-01

Describes a variety of laboratory experiments including carbon dioxide reduction, animal respiration, atmospheric pressure determination, and others, that can be performed using discarded syringes. (GS)

Economic and microbiologic evaluation of single-dose vial extension for hazardous drugs.

PubMed

Rowe, Erinn C; Savage, Scott W; Rutala, William A; Weber, David J; Gergen-Teague, Maria; Eckel, Stephen F

2012-07-01

The update of US Pharmacopeia Chapter <797> in 2008 included guidelines stating that single-dose vials (SDVs) opened and maintained in an International Organization for Standardization Class 5 environment can be used for up to 6 hours after initial puncture. A study was conducted to evaluate the cost of discarding vials after 6 hours and to further test sterility of vials beyond this time point, subsequently defined as the beyond-use date (BUD). Financial determination of SDV waste included 2 months of retrospective review of all doses prescribed. Additionally, actual waste log data were collected. Active and control vials (prepared using sterilized trypticase soy broth) were recovered, instead of discarded, at the defined 6-hour BUD. The institution-specific waste of 19 selected SDV medications discarded at 6 hours was calculated at $766,000 annually, and tracking waste logs for these same medications was recorded at $770,000 annually. Microbiologic testing of vial extension beyond 6 hours showed that 11 (1.86%) of 592 samples had one colony-forming unit on one of two plates. Positive plates were negative at subsequent time points, and all positives were single isolates most likely introduced during the plating process. The cost of discarding vials at 6 hours was significant for hazardous medications in a large academic medical center. On the basis of microbiologic data, vial BUD extension demonstrated a contamination frequency of 1.86%, which likely represented exogenous contamination; vial BUD extension for the tested drugs showed no growth at subsequent time points and could provide an annual cost savings of more than $600,000.

Discards beneficiation in South Africa

DOE Office of Scientific and Technical Information (OSTI.GOV)

Horsfall, D.W.

1995-08-01

The intergrown nature of most South African coals means that in beneficiating them, the preparation engineer rarely has the easy task of carrying out a simple separation between good coal and high density shale or stone. Apart from de-shaling operations, all beneficiation entails rejecting, not only adventitious stone but a large percentage of high ash but strongly combustible middlings material. Typically, a coal preparation plant can only recover about 70-80% of the heat in the run-of-mine coal. The other 20-30% ends up on the discard heap. Over the last decade, extensive studies were carried out to establish the extend tomore » which that discarded heat may be recoverable in marketable grades of coal. Detailed washability studies were carried out on four mines which between them produce almost 60% of the total make of discards. Computer simulations allowed different flowsheet configurations to be assessed to give rewashed coal of various calorific values. The flowsheets were also subjected to factorial establishment of budget capital and operating costs. Finally some initial work was carried out on the potential markets for such products. This paper is concise account of the results of the study for one major mine. Please note that the paper is based almost wholly on the evaluation carried out for the Energy Branch of the Department of Mineral and Energy Affairs (DMEA). The actual work was executed by the van Eck and Lurie Division of E L Bateman and Co. The writer chaired the Beneficiation Sub-Committee set up by the DMEA to oversee and guide the work, and in that capacity was closely connected with the study as it evolved. Other acknowledgements are given at the end of the paper.« less

A Pilot Study Comparing Observational and Questionnaire Surrogate Measures of Pesticide Exposure Among Residents Impacted by the Ecuadorian Flower Industry.

PubMed

Handal, Alexis J; McGough-Maduena, Alison; Páez, Maritza; Skipper, Betty; Rowland, Andrew S; Fenske, Richard A; Harlow, Siobán D

2015-01-01

Self-reported measures of residential pesticide exposure are commonly used in epidemiological studies, especially when financial and logistical resources are limited. However, self-reporting is prone to misclassification bias. This pilot study assesses the agreement between self-report of residential pesticide exposure with direct observation measures, in an agricultural region of Ecuador, as a cross-validation method in 26 participants (16 rose workers and 10 controls), with percent agreement and kappa statistics calculated. Proximity of homes to nearby flower farms was found to have only fair agreement (kappa =.35). The use of discarded plastics (kappa =.06) and wood (kappa =.13) were found to have little agreement. Results indicate that direct observation or measurement may provide more accurate appraisals of residential exposures, such as proximity to industrial farmland and the use of discarded materials obtained from the flower farms.

Pallet re-use and recycling saves high value material from landfills

Treesearch

Urs Buehlmann; Philip Araman; Robert Bush

2010-01-01

Pallets move the world. In the United States, an estimated 4 billion pallets are in daily service. Nationwide, on an annual basis, an estimated 441 million new pallets are manufactured and 357 million pallets are repaired or rebuilt from discarded pallets. Manufacturing these pallets consumes more than seven billion bd ft1 of lumber annually, roughly two-thirds...

An evaluation: The potential of discarded tires as a source of fuel

NASA Technical Reports Server (NTRS)

Collins, L. W.; Downs, W. R.; Gibson, E. K.; Moore, G. W.

1974-01-01

The destructive distillation of rubber tire samples was studied by thermogravimetry, differential scanning calorimetry, combustion calorimetry, and mass spectroscopy. The decomposition reaction was found to be exothermic and produced a mass loss of 65 percent. The gas evolution curves that were obtained indicate that a variety of organic materials are evolved simultaneously during the decomposition of the rubber polymer.

Separation and recovery of fine particles from waste circuit boards using an inflatable tapered diameter separation bed.

PubMed

Duan, Chenlong; Sheng, Cheng; Wu, Lingling; Zhao, Yuemin; He, Jinfeng; Zhou, Enhui

2014-01-01

Recovering particle materials from discarded printed circuit boards can enhance resource recycling and reduce environmental pollution. Efficiently physically separating and recovering fine metal particles (-0.5 mm) from the circuit boards are a key recycling challenge. To do this, a new type of separator, an inflatable tapered diameter separation bed, was developed to study particle motion and separation mechanisms in the bed's fluid flow field. For 0.5-0.25 mm circuit board particles, metal recovery rates ranged from 87.56 to 94.17%, and separation efficiencies ranged from 87.71 to 94.20%. For 0.25-0.125 mm particles, metal recovery rates ranged from 84.76 to 91.97%, and separation efficiencies ranged from 84.74 to 91.86%. For superfine products (-0.125 mm), metal recovery rates ranged from 73.11 to 83.04%, and separation efficiencies ranged from 73.00 to 83.14%. This research showed that the inflatable tapered diameter separation bed achieved efficient particle separation and can be used to recover fine particles under a wide range of operational conditions. The bed offers a new mechanical technology to recycle valuable materials from discarded printed circuit boards, reducing environmental pollution.

Death in the clinic: women's perceptions and experiences of discarding supernumerary IVF embryos.

PubMed

de Lacey, Sheryl

2017-03-01

Perspectives on the status of human embryos and whether they should be discarded differ globally. Some countries protect embryos in law while in other countries embryos 'die' or 'succumb' in assisted reproductive technology clinics on a daily basis. This study analyses interview data drawn from a larger qualitative study conducted in South Australia from 2004-2007. 21 women and 12 of 21 partners were interviewed about the decision they made to discard their embryos. The analysis reported here sought to examine the ways in which women constructed and experienced the decision to discard embryos. The article highlights the ways in which embryo discard is a contested discursive space. Embryo death is sequestered through their confinement in the laboratory and their invisibility to the naked eye. The clinic treated embryo discard as disposal of biological waste and failed to acknowledge the meaning of the event. By contrast women experienced emotional bereavement described as similar to early pregnancy loss, and described experiences of attachment and grief. For sensitive and compassionate care these differences in perceptions of embryo discard need to be addressed. © 2016 Foundation for the Sociology of Health & Illness.

Administering truncated receive functions in a parallel messaging interface

DOEpatents

Archer, Charles J; Blocksome, Michael A; Ratterman, Joseph D; Smith, Brian E

2014-12-09

Administering truncated receive functions in a parallel messaging interface (`PMI`) of a parallel computer comprising a plurality of compute nodes coupled for data communications through the PMI and through a data communications network, including: sending, through the PMI on a source compute node, a quantity of data from the source compute node to a destination compute node; specifying, by an application on the destination compute node, a portion of the quantity of data to be received by the application on the destination compute node and a portion of the quantity of data to be discarded; receiving, by the PMI on the destination compute node, all of the quantity of data; providing, by the PMI on the destination compute node to the application on the destination compute node, only the portion of the quantity of data to be received by the application; and discarding, by the PMI on the destination compute node, the portion of the quantity of data to be discarded.

36 CFR 6.3 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... ashes, but not including metal or plastic. Solid waste means garbage, refuse, sludge from a waste treatment plant, water supply treatment plant, or air pollution control facility and other discarded...

36 CFR 6.3 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... ashes, but not including metal or plastic. Solid waste means garbage, refuse, sludge from a waste treatment plant, water supply treatment plant, or air pollution control facility and other discarded...

Comparing the catch composition, profitability and discard survival from different trammel net designs targeting common spiny lobster (Palinurus elephas) in a Mediterranean fishery.

PubMed

Catanese, Gaetano; Hinz, Hilmar; Gil, Maria Del Mar; Palmer, Miquel; Breen, Michael; Mira, Antoni; Pastor, Elena; Grau, Amalia; Campos-Candela, Andrea; Koleva, Elka; Grau, Antoni Maria; Morales-Nin, Beatriz

2018-01-01

In the Balearic Islands, different trammel net designs have been adopted to promote fisheries sustainability and reduce discards. Here, we compare the catch performance of three trammel net designs targeting the spiny lobster Palinurus elephas in terms of biomass, species composition and revenue from commercial catches and discards. Designs differ in the netting fiber type (standard polyfilament, PMF, or a new polyethylene multi-monofilament, MMF) and the use of a guarding net or greca , a mesh piece intended to reduce discards. Catches were surveyed by an on-board observer from 1,550 netting walls corresponding to 70 nets. The number of marketable species captured indicated that the lobster trammel net fishery has multiple targets, which contribute significantly to the total revenue. The discarded species ranged from habitat-forming species to elasmobranches, but the magnitude of gear-habitat interactions on the long term dynamics of benthos remains unclear. No relevant differences in revenue and weight of discards were detected after Bayesian analyses. However, the species composition of discards was different when using greca . Interestingly, high immediate survival was found for discarded undersized lobsters, while a seven day survival assessment, using captive observation, gave an asymptotic estimate of survival probability as 0.64 (95% CI [0.54-0.76]). Therefore, it is recommended that it would be beneficial for this stock if an exemption from the EU landing obligation regulation was sought for undersized lobsters in the Balearic trammel net fishery.

Economic and Microbiologic Evaluation of Single-Dose Vial Extension for Hazardous Drugs

PubMed Central

Rowe, Erinn C.; Savage, Scott W.; Rutala, William A.; Weber, David J.; Gergen-Teague, Maria; Eckel, Stephen F.

2012-01-01

Purpose: The update of US Pharmacopeia Chapter <797> in 2008 included guidelines stating that single-dose vials (SDVs) opened and maintained in an International Organization for Standardization Class 5 environment can be used for up to 6 hours after initial puncture. A study was conducted to evaluate the cost of discarding vials after 6 hours and to further test sterility of vials beyond this time point, subsequently defined as the beyond-use date (BUD). Methods: Financial determination of SDV waste included 2 months of retrospective review of all doses prescribed. Additionally, actual waste log data were collected. Active and control vials (prepared using sterilized trypticase soy broth) were recovered, instead of discarded, at the defined 6-hour BUD. Results: The institution-specific waste of 19 selected SDV medications discarded at 6 hours was calculated at $766,000 annually, and tracking waste logs for these same medications was recorded at $770,000 annually. Microbiologic testing of vial extension beyond 6 hours showed that 11 (1.86%) of 592 samples had one colony-forming unit on one of two plates. Positive plates were negative at subsequent time points, and all positives were single isolates most likely introduced during the plating process. Conclusion: The cost of discarding vials at 6 hours was significant for hazardous medications in a large academic medical center. On the basis of microbiologic data, vial BUD extension demonstrated a contamination frequency of 1.86%, which likely represented exogenous contamination; vial BUD extension for the tested drugs showed no growth at subsequent time points and could provide an annual cost savings of more than $600,000. PMID:23180998

Method for preparing radiopharmaceutical complexes

DOEpatents

Jones, Alun G.; Davison, Alan; Abrams, Michael J.

1989-05-02

A method for preparing radiopharmaceutical complexes that are substantially free of the reaction materials used to produce the radiopharmaceutical complex is disclosed. The method involves admixing in a suitable first solvent in a container a target seeking ligand or salt or metal adduct thereof, a radionuclide label, and a reducing agent for said radionuclide, thereby forming said radiopharmaceutical complex; coating the interior walls of the container with said pharmaceutical complex; discarding the solvent containing by-products and unreacted starting reaction materials; and removing the radiopharmaceutical complex from said walls by dissolving it in a second solvent, thereby obtaining said radiopharmaceutical complex substantially free of by-products and unreacted starting materials.

Effects of suction dredging on streams: a review and an evaluation strategy

Treesearch

Bret C. Harvey; Thomas E. Lisle

1998-01-01

Abstract - Suction dredging for gold in river channels is a small-scale mining practice whereby streambed material is sucked up a pipe, passed over a sluice box to sort out the gold, and discarded as tailings over another area of bed. Natural resource managers should be concerned about suction dredging because it is common in streams in western North America that...

The weekend effect alters the procurement and discard rates of deceased donor kidneys in the United States

PubMed Central

Mohan, Sumit; Foley, Karl; Chiles, Mariana C; Dube, Geoffrey K; Patzer, Rachel E; Pastan, Stephen; Crew, R John; Cohen, David; Ratner, Lloyd

2016-01-01

Factors contributing to the high rate of discard among deceased donor kidneys remain poorly understood and the influence of resource limitations of weekends on kidney transplantation is unknown. To quantify this we used data from the Scientific Registry of Transplant Recipients and assembled a retrospective cohort of 181,799 deceased donor kidneys recovered for transplantation from 2000-2013. We identified the impact of the day of the week on the procurement and subsequent utilization or discard of deceased donor kidneys in the United States, as well as report the geographic variation on the impact of weekends on transplantation. Compared to weekday kidneys, organs procured on weekends were significantly more likely to be discarded than transplanted (odds ratio: 1.16; 95% confidence interval 1.13 – 1.19), even after adjusting for organ quality (adjusted odds ratio: 1.13; 95% confidence interval 1.10 – 1.17). Weekend discards were of a significantly higher quality than weekday discards (kidney donor profile index: 76.5 vs 77.3%). Considerable geographic variation was noted in the proportion of transplants that occurred over the weekend. Kidneys available for transplant over the weekend were significantly more likely to be used at larger transplant centers, be shared without payback, and experienced shorter cold ischemia times. Thus, factors other than kidney quality are contributing to the discard of deceased donor kidneys, particularly during weekends. Policy prescriptions, administrative or organizational solutions within transplant programs may potentially mitigate against the recent increase in kidney discards. PMID:27182001

Optimization of the method for α-l-fucosidase, β-d-galactosidase and β-d-glucuronidase determination in serum from hemolyzed blood.

PubMed

Chojnowska, Sylwia; Ptaszyńska-Sarosiek, Iwona; Kępka, Alina; Szajda, Sławomir Dariusz; Waszkiewicz, Napoleon; Zwierz, Krzysztof

2018-06-06

Adaptation of the colorimetric method for the determination of β-d-galactosidase, β-d-glucuronidase and α-l-fucosidase activities in serums from hemolyzed blood, the material currently being discarded. The materials included serums from hemolyzed and non-hemolyzed blood, obtained from 26 healthy volunteers. The adaptation of the method involved precipitation of the proteins with trichloroacetic acid after incubating serums with substrates, but before determining the products of enzymatic reactions. In serums from hemolyzed and non-hemolyzed blood of the same persons, we found high correlations among the results obtained using hemolyzed blood (with adapted) and non-hemolyzed blood (with non-adapted) methods. We are able to determine the β-d-galactosidase, β-d-glucuronidase and α-l-fucosidase activities in serums from hemolyzed blood (with adapted) and non-hemolyzed blood (with non-adapted) methods, with the same accuracy and precision. Copyright © 2018 Medical University of Bialystok. Published by Elsevier B.V. All rights reserved.

Production of L-lactic Acid from Biomass Wastes Using Scallop Crude Enzymes and Novel Lactic Acid Bacterium

NASA Astrophysics Data System (ADS)

Yanagisawa, Mitsunori; Nakamura, Kanami; Nakasaki, Kiyohiko

In the present study, biomass waste raw materials including paper mill sludge, bamboo, sea lettuce, and shochu residue (from a distiller) and crude enzymes derived from inedible and discarded scallop parts were used to produce L-lactic acid for the raw material of biodegradable plastic poly-lactic acid. The activities of cellulase and amylase in the crude enzymes were 22 and 170units/L, respectively, and L-lactic acid was produced from every of the above mentioned biomass wastes, by the method of liquid-state simultaneous saccharification and fermentation (SSF) . The L-lactic acid concentrations produced from sea lettuce and shochu residue, which contain high concentration of starch were 3.6 and 9.3g/L, respectively, and corresponded to greater than 25% of the conversion of glucans contained in these biomass wastes. Furthermore, using the solid state SSF method, concentrations as high as 13g/L of L-lactic acid were obtained from sea lettuce and 26g/L were obtained from shochu residue.

Improving efficiency of a regional stand alone bone bank.

PubMed

Warnock, Jonathan M; Rowan, Clare H; Davidson, Helen; Millar, Ciara; McAlinden, M Gavan

2016-03-01

The introduction of a stand-alone Bone Bank in our Regional Orthopaedic Hospital has improved the availability of femoral head allograft. Benninger et al. (Bone Joint J 96-B:1307-1311, 2014), demonstrated their institutions bank to be cost effective despite a 30 % discard rate for harvested allograft. We sought to audit our own discard rates and subsequent cost-effectiveness of our bone bank. Donor recruitment. Before approaching a potential donor, our establishment's nurse specialists review their clinical notes and biochemical laboratory results, available on a regional Electronic Care Records. They view femoral head architecture on radiographs against set criteria, Patient Archive and Communication system (SECTRA, Sweden). In total 1383 femoral heads were harvested, 247 were discarded giving an overall rate of 17.9 %. The most common reasons for discard of harvested graft was a positive microbiology/bacteriology result, n = 96 (38.9 %). After a rise in discard rates in 2007, we have steadily reduced our discard rates since 2006/2007 (28.2 %), 2008/2009 (17 %), 2010/2011 (14.8 %), and finally to 10.3 % in 2012/2013. In the current financial year, our cost to harvest, test, store and release a femoral head is £ 610. With a structured donor recruitment process and unique pre-operative radiographic analysis we have successfully reduced our discard rates bi-annually making our bone bank increasingly cost-effective.

Atypical hypocalcemia in 2 dairy cows, after having been fed discarded vegetable cooking oil.

PubMed

Gunn, Allan J; Abuelo, Angel

2017-12-01

Two mid-lactation dairy cows were presented sternally recumbent 4 days after the herd had been fed discarded vegetable cooking oil ad libitum. In both affected animals hypocalcemia was confirmed by clinical chemistry and response to treatment. This atypical presentation of hypocalcemia associated with feeding discarded cooking oil is previously unreported.

Atypical hypocalcemia in 2 dairy cows, after having been fed discarded vegetable cooking oil

PubMed Central

Gunn, Allan J.; Abuelo, Angel

2017-01-01

Two mid-lactation dairy cows were presented sternally recumbent 4 days after the herd had been fed discarded vegetable cooking oil ad libitum. In both affected animals hypocalcemia was confirmed by clinical chemistry and response to treatment. This atypical presentation of hypocalcemia associated with feeding discarded cooking oil is previously unreported. PMID:29203941

77 FR 15712 - Atlantic Highly Migratory Species; 2012 Atlantic Bluefin Tuna Quota Specifications

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-16

... information indicates an underharvest of the 2011 adjusted BFT quota. Final 2011 landings and dead discard... annual meeting, ICCAT recommended a TAC of 1,750 mt annually for 2011 and for 2012, inclusive of dead... column. Accounting for Dead Discards The United States must report BFT landings data and BFT dead discard...

50 CFR Table 1b to Part 679 - Discard and Disposition Codes1

Code of Federal Regulations, 2014 CFR

2014-10-01

... Confiscation or seized 63 Deadloss (crab only) 79 Overage 62 Retained for future sale 87 Tagged IFQ Fish (Exempt from debit) 64 Whole fish/bait, not sold. Used as bait onboard vessel 92 Whole fish/bait, sold 61 Whole fish/discard at sea. Whole groundfish and prohibited species discarded by catcher vessels, catcher...

50 CFR Table 1b to Part 679 - Discard and Disposition Codes1

Code of Federal Regulations, 2012 CFR

2012-10-01

... Confiscation or seized 63 Deadloss (crab only) 79 Overage 62 Retained for future sale 87 Tagged IFQ Fish (Exempt from debit) 64 Whole fish/bait, not sold. Used as bait onboard vessel 92 Whole fish/bait, sold 61 Whole fish/discard at sea. Whole groundfish and prohibited species discarded by catcher vessels, catcher...

50 CFR Table 1b to Part 679 - Discard and Disposition Codes1

Code of Federal Regulations, 2011 CFR

2011-10-01

... Confiscation or seized 63 Deadloss (crab only) 79 Overage 62 Retained for future sale 87 Tagged IFQ Fish (Exempt from debit) 64 Whole fish/bait, not sold. Used as bait onboard vessel 92 Whole fish/bait, sold 61 Whole fish/discard at sea. Whole groundfish and prohibited species discarded by catcher vessels, catcher...

50 CFR Table 1b to Part 679 - Discard and Disposition Codes1

Code of Federal Regulations, 2013 CFR

2013-10-01

... Confiscation or seized 63 Deadloss (crab only) 79 Overage 62 Retained for future sale 87 Tagged IFQ Fish (Exempt from debit) 64 Whole fish/bait, not sold. Used as bait onboard vessel 92 Whole fish/bait, sold 61 Whole fish/discard at sea. Whole groundfish and prohibited species discarded by catcher vessels, catcher...

Analytical resolution of the reactive diffusion equation for transient electronics including materials whose porosity value changes in terms of their thickness

NASA Astrophysics Data System (ADS)

Vargas Toro, Agustín.

2014-05-01

Transient electronic devices are a new technology development whose main characteristic is that its components can disappear in a programmed and controlled way, which means such devices have a pre-engineered service life. Nowadays, transient electronics have a large application field, involving from the reduction of e-waste in the planet until the development of medical instruments and implants that can be discarded when the patients do not need it anymore, avoiding the trouble of having an extra procedure for them. These devices must be made from biocompatible materials avoiding long-term adverse effects in the environment and patients. It is fundamental to develop an analytical model that allows describing the behavior of these materials considering cases which its porosity may be constant or not, in presence of water or any other biofluid. In order to accomplish this analysis was solve the reactive diffusion equation based on Bromwich's integral and the Residue theorem for two material cases, those whose porosity is constant, and those whose porosity increases linearly in terms of its thickness, where was found a general expression. This allows to the analysis of the relation of the electric resistance (per unit length) and the rate of dissolution of the material.

[Biodegradation of polyethylene].

PubMed

Yang, Jun; Song, Yi-ling; Qin, Xiao-yan

2007-05-01

Plastic material is one of the most serious solid wastes pollution. More than 40 million tons of plastics produced each year are discarded into environment. Plastics accumulated in the environment is highly resistant to biodegradation and not be able to take part in substance recycle. To increase the biodegradation efficiency of plastics by different means is the main research direction. This article reviewed the recent research works of polyethylene biodegradation that included the modification and pretreatment of polyethylene, biodegradation pathway, the relevant microbes and enzymes and the changes of physical, chemical and biological properties after biodegradation. The study directions of exploiting the kinds of life-forms of biodegradation polyethylene except the microorganisms, isolating and cloning the key enzymes and gene that could produce active groups, and enhancing the study on polyethylene biodegradation without additive were proposed.

Combating oil spill problem using plastic waste.

PubMed

Saleem, Junaid; Ning, Chao; Barford, John; McKay, Gordon

2015-10-01

Thermoplastic polymers (such as polypropylene, polyethylene, polyethylene terephthalate (PET) and high density polyethylene (HDPE)) constitute 5-15% of municipal solid waste produced across the world. A huge quantity of plastic waste is disposed of each year and is mostly either discarded in landfills or incinerated. On the other hand, the usage of synthetic polymers as oil sorbents, in particular, polyolefins, including polypropylene (PP), and polyethylene (PE) are the most commonly used oil sorbent materials mainly due to their low cost. However, they possess relatively low oil absorption capacities. In this work, we provide an innovative way to produce a value-added product such as oil-sorbent film with high practical oil uptake values in terms of g/g from waste HDPE bottles for rapid oil spill remedy. Copyright © 2015 Elsevier Ltd. All rights reserved.

Association between Organ Procurement Organization Social Network Centrality and Kidney Discard and Transplant Outcomes1

PubMed Central

Butala, Neel M.; King, Marissa D.; Reitsma, William; Formica, Richard N.; Abt, Peter L.; Reese, Peter P.; Parikh, Chirag R.

2015-01-01

Background Given growth in kidney transplant waitlists and discard rates, donor kidney acceptance is an important problem. We used network analysis to examine whether organ procurement organization (OPO) network centrality affects discard and outcomes. Methods We identified 106,160 deceased-donor kidneys recovered for transplant from 2000–2010 in SRTR. We constructed the transplant network by year with each OPO representing a node and each kidney-sharing relationship between OPOs representing a directed tie between nodes. Primary exposures were the number of different OPOs to which an OPO has given a kidney or from which an OPO has received a kidney in year preceding procurement year. Primary outcomes were discard, cold-ischemia time, delayed graft function, and 1-year graft loss. We used multivariable regression, restricting analysis to the 50% of OPOs with highest discard and stratifying remaining OPOs by kidney volume. Models controlled for kidney donor risk index, waitlist time, and kidney pumping. Results An increase in one additional OPO to which a kidney was given by a procuring OPO in a year was associated with 1.4% lower likelihood of discard for a given kidney (odds ratio, 0.986; 95% confidence interval, 0.974-0.998) among OPOs procuring high kidney volume, but 2% higher likelihood of discard (OR:1.021, CI:1.006, 1.037) among OPOs procuring low kidney volume, with mixed associations with recipient outcomes. Conclusions Our study highlights the value of network analysis in revealing how broader kidney sharing is associated with levels of organ acceptance. We conclude interventions to promote broader inter-OPO sharing could be developed to reduce discard for a subset of OPOs. PMID:26102610

Separation and Recovery of Fine Particles from Waste Circuit Boards Using an Inflatable Tapered Diameter Separation Bed

PubMed Central

Sheng, Cheng; Wu, Lingling; Zhao, Yuemin; He, Jinfeng; Zhou, Enhui

2014-01-01

Recovering particle materials from discarded printed circuit boards can enhance resource recycling and reduce environmental pollution. Efficiently physically separating and recovering fine metal particles (−0.5 mm) from the circuit boards are a key recycling challenge. To do this, a new type of separator, an inflatable tapered diameter separation bed, was developed to study particle motion and separation mechanisms in the bed's fluid flow field. For 0.5–0.25 mm circuit board particles, metal recovery rates ranged from 87.56 to 94.17%, and separation efficiencies ranged from 87.71 to 94.20%. For 0.25–0.125 mm particles, metal recovery rates ranged from 84.76 to 91.97%, and separation efficiencies ranged from 84.74 to 91.86%. For superfine products (−0.125 mm), metal recovery rates ranged from 73.11 to 83.04%, and separation efficiencies ranged from 73.00 to 83.14%. This research showed that the inflatable tapered diameter separation bed achieved efficient particle separation and can be used to recover fine particles under a wide range of operational conditions. The bed offers a new mechanical technology to recycle valuable materials from discarded printed circuit boards, reducing environmental pollution. PMID:25379546

78 FR 36685 - Atlantic Highly Migratory Species; 2013 Atlantic Bluefin Tuna Quota Specifications

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-19

... forward to 2011, and to account for a portion of the estimated 2011 dead discards up front; and (3... from the previous fishing year and any accounting for dead discards. For the proposed rule, NMFS used the 2011 estimate of 145.2 mt as a proxy for potential 2013 dead discards, because the BFT dead...

76 FR 67656 - Fisheries of the Caribbean, Gulf of Mexico, and South Atlantic; Reef Fish Fishery of the Gulf of...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-02

... under the rebuilding plan assume a proportional reduction in dead discards of gag. However, due to the... percent to account for additional dead discards not accounted for in the assessment analyses. Therefore... gag regulatory dead discards is to reduce the commercial minimum size limit so that gag that would...

Bayesian spatio-temporal discard model in a demersal trawl fishery

NASA Astrophysics Data System (ADS)

Grazia Pennino, M.; Muñoz, Facundo; Conesa, David; López-Quílez, Antonio; Bellido, José M.

2014-07-01

Spatial management of discards has recently been proposed as a useful tool for the protection of juveniles, by reducing discard rates and can be used as a buffer against management errors and recruitment failure. In this study Bayesian hierarchical spatial models have been used to analyze about 440 trawl fishing operations of two different metiers, sampled between 2009 and 2012, in order to improve our understanding of factors that influence the quantity of discards and to identify their spatio-temporal distribution in the study area. Our analysis showed that the relative importance of each variable was different for each metier, with a few similarities. In particular, the random vessel effect and seasonal variability were identified as main driving variables for both metiers. Predictive maps of the abundance of discards and maps of the posterior mean of the spatial component show several hot spots with high discard concentration for each metier. We argue how the seasonal/spatial effects, and the knowledge about the factors influential to discarding, could potentially be exploited as potential mitigation measures for future fisheries management strategies. However, misidentification of hotspots and uncertain predictions can culminate in inappropriate mitigation practices which can sometimes be irreversible. The proposed Bayesian spatial method overcomes these issues, since it offers a unified approach which allows the incorporation of spatial random-effect terms, spatial correlation of the variables and the uncertainty of the parameters in the modeling process, resulting in a better quantification of the uncertainty and accurate predictions.

Decomposition and carbon storage of selected paper products in laboratory-scale landfills.

PubMed

Wang, Xiaoming; De la Cruz, Florentino B; Ximenes, Fabiano; Barlaz, Morton A

2015-11-01

The objective of this study was to measure the anaerobic biodegradation of different types of paper products in laboratory-scale landfill reactors. The study included (a) measurement of the loss of cellulose, hemicellulose, organic carbon, and (b) measurement of the methane yields for each paper product. The test materials included two samples each of newsprint (NP), copy paper (CP), and magazine paper (MG), and one sample of diaper (DP). The methane yields, carbon storage factors and the extent of cellulose and hemicellulose decomposition all consistently show that papers made from mechanical pulps (e.g., NPs) are less degradable than those made from chemical pulps where essentially all lignin was chemically removed (e.g., CPs). The diaper, which is not only made from chemical pulp but also contains some gel and plastic, exhibited limited biodegradability. The extent of biogenic carbon conversion varied from 21 to 96% among papers, which contrasts with the uniform assumption of 50% by the Intergovernmental Panel on Climate Change (IPCC) for all degradable materials discarded in landfills. Biochemical methane potential tests also showed that the solids to liquid ratio used in the test can influence the results. Copyright © 2015 Elsevier B.V. All rights reserved.

32 CFR 327.7 - Access by individuals

Code of Federal Regulations, 2011 CFR

2011-07-01

... comply with the established requirements. This includes refusing to name a physician to receive medical... are kept or discarded at the author's discretion and over which DeCA exercises no direct control, are...; or (ii) An individual fails to comply with the established requirements including refusing to name a...

Long-Term Outcomes and Discard Rate of Kidneys by Decade of Extended Criteria Donor Age

PubMed Central

Messina, Maria; Diena, Davide; Dellepiane, Sergio; Guzzo, Gabriella; Lo Sardo, Luca; Fop, Fabrizio; Segoloni, Giuseppe P.; Amoroso, Antonio; Magistroni, Paola

2017-01-01

Background and objectives Extended criteria donors represent nowadays a main resource for kidney transplantation, and recovery criteria are becoming increasingly inclusive. However, the limits of this approach are not clear as well as the effects of extreme donor ages on long-term kidney transplantation outcomes. To address these issues, we performed a retrospective study on extended criteria donor kidney transplantation. Design, setting, participants, & measurements In total, 647 consecutive extended criteria donor kidney transplantations performed over 11 years (2003–2013) were included. Donor, recipient, and procedural variables were classified according to donor age decades (group A, 50–59 years old [n=91]; group B, 60–69 years old [n=264]; group C, 70–79 years old [n=265]; and group D, ≥80 years old [n=27]). Organs were allocated in single- or dual-kidney transplantation after a multistep evaluation including clinical and histologic criteria. Long-term outcomes and main adverse events were analyzed among age groups and in either single- or dual-kidney transplantation. Kidney discard rate incidence and causes were evaluated. Results Median follow-up was 4.9 years (25th; 75th percentiles: 2.7; 7.6 years); patient and graft survival were comparable among age groups (5-year patient survival: group A, 87.8%; group B, 88.1%; group C, 88.0%; and group D, 90.1%; P=0.77; graft survival: group A, 74.0%; group B, 74.2%; group C, 75.2%; and group D, 65.9%; P=0.62) and between dual-kidney transplantation and single-kidney transplantation except for group D, with a better survival for dual-kidney transplantation (P=0.04). No difference was found analyzing complications incidence or graft function over time. Kidney discard rate was similar in groups A, B, and C (15.4%, 17.7%, and 20.1%, respectively) and increased in group D (48.2%; odds ratio, 5.1 with A as the reference group; 95% confidence interval, 2.96 to 8.79). Conclusions Discard rate and long-term outcomes are similar among extended criteria donor kidney transplantation from donors ages 50–79 years old. Conversely, discard rate was strikingly higher among kidneys from octogenarian donors, but appropriate selection provides comparable long-term outcomes, with better graft survival for dual-kidney transplantation. PMID:27979977

Long-Term Outcomes and Discard Rate of Kidneys by Decade of Extended Criteria Donor Age.

PubMed

Messina, Maria; Diena, Davide; Dellepiane, Sergio; Guzzo, Gabriella; Lo Sardo, Luca; Fop, Fabrizio; Segoloni, Giuseppe P; Amoroso, Antonio; Magistroni, Paola; Biancone, Luigi

2017-02-07

Extended criteria donors represent nowadays a main resource for kidney transplantation, and recovery criteria are becoming increasingly inclusive. However, the limits of this approach are not clear as well as the effects of extreme donor ages on long-term kidney transplantation outcomes. To address these issues, we performed a retrospective study on extended criteria donor kidney transplantation. In total, 647 consecutive extended criteria donor kidney transplantations performed over 11 years (2003-2013) were included. Donor, recipient, and procedural variables were classified according to donor age decades (group A, 50-59 years old [n=91]; group B, 60-69 years old [n=264]; group C, 70-79 years old [n=265]; and group D, ≥80 years old [n=27]). Organs were allocated in single- or dual-kidney transplantation after a multistep evaluation including clinical and histologic criteria. Long-term outcomes and main adverse events were analyzed among age groups and in either single- or dual-kidney transplantation. Kidney discard rate incidence and causes were evaluated. Median follow-up was 4.9 years (25th; 75th percentiles: 2.7; 7.6 years); patient and graft survival were comparable among age groups (5-year patient survival: group A, 87.8%; group B, 88.1%; group C, 88.0%; and group D, 90.1%; P=0.77; graft survival: group A, 74.0%; group B, 74.2%; group C, 75.2%; and group D, 65.9%; P=0.62) and between dual-kidney transplantation and single-kidney transplantation except for group D, with a better survival for dual-kidney transplantation (P=0.04). No difference was found analyzing complications incidence or graft function over time. Kidney discard rate was similar in groups A, B, and C (15.4%, 17.7%, and 20.1%, respectively) and increased in group D (48.2%; odds ratio, 5.1 with A as the reference group; 95% confidence interval, 2.96 to 8.79). Discard rate and long-term outcomes are similar among extended criteria donor kidney transplantation from donors ages 50-79 years old. Conversely, discard rate was strikingly higher among kidneys from octogenarian donors, but appropriate selection provides comparable long-term outcomes, with better graft survival for dual-kidney transplantation. Copyright © 2017 by the American Society of Nephrology.

76 FR 13583 - Atlantic Highly Migratory Species; Atlantic Bluefin Tuna Quotas and Atlantic Tuna Fisheries...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-14

... dead discards as well as the amount of 2010 underharvest (of 2010 adjusted quota) allowed by ICCAT to... would adjust these base quotas for the 2012 fishing year based on the best estimate of dead discards and... early 2012). As described below, 160 mt is used as a proxy for dead discards based on the 2009 estimate...

Characterization and modelling of the heat transfers in a pilot-scale reactor during composting under forced aeration.

PubMed

de Guardia, A; Petiot, C; Benoist, J C; Druilhe, C

2012-06-01

The paper focused on the modelling of the heat transfers during composting in a pilot-scale reactor under forced aeration. The model took into account the heat production and the transfers by evaporation, convection between material and gas crossing the material, conduction and surface convection between gas and material in bottom and upper parts of the reactor. The model was adjusted thanks to the measurements practised during fifteen composting experiments in which five organic wastes were, each, composted under three constant aeration rates. Heat production was considered proportional to oxygen consumption rate and the enthalpy per mole oxygen consumed was assumed constant. The convective heat transfer coefficients were determined on basis of the continuous measurements of the temperatures of both the lid and the bottom part of the reactor. The model allowed a satisfying prediction of the temperature of the composting material. In most cases, the mean absolute discard between the experimental and the simulated temperatures was inferior to 2.5°C and the peaks of temperature occurred with less than 8h delay. For the half of the experiments the temperature discard between the simulated peak and the experimental one was inferior to 5°C. On basis of the calculation of a stoichiometric production of water through oxidation of the biodegradable organic matter, the simulation of water going out from material as vapour also allowed a rather satisfying prediction of the mass of water in final mixture. The influence of the aeration rate on every type of heat loss was characterized. Finally, the model was used to evaluate the impacts on material temperature caused by the change of the insulation thickness, the ambient temperature, take the lid away, the increase or the decrease of the mass of waste to compost. Copyright © 2012 Elsevier Ltd. All rights reserved.

Characterization and modelling of the heat transfers in a pilot-scale reactor during composting under forced aeration

DOE Office of Scientific and Technical Information (OSTI.GOV)

Guardia, A. de, E-mail: amaury.de-guardia@irstea.fr; Universite Europeenne de Bretagne, F-35000 Rennes; Petiot, C.

2012-06-15

The paper focused on the modelling of the heat transfers during composting in a pilot-scale reactor under forced aeration. The model took into account the heat production and the transfers by evaporation, convection between material and gas crossing the material, conduction and surface convection between gas and material in bottom and upper parts of the reactor. The model was adjusted thanks to the measurements practised during fifteen composting experiments in which five organic wastes were, each, composted under three constant aeration rates. Heat production was considered proportional to oxygen consumption rate and the enthalpy per mole oxygen consumed was assumedmore » constant. The convective heat transfer coefficients were determined on basis of the continuous measurements of the temperatures of both the lid and the bottom part of the reactor. The model allowed a satisfying prediction of the temperature of the composting material. In most cases, the mean absolute discard between the experimental and the simulated temperatures was inferior to 2.5 Degree-Sign C and the peaks of temperature occurred with less than 8 h delay. For the half of the experiments the temperature discard between the simulated peak and the experimental one was inferior to 5 Degree-Sign C. On basis of the calculation of a stoichiometric production of water through oxidation of the biodegradable organic matter, the simulation of water going out from material as vapour also allowed a rather satisfying prediction of the mass of water in final mixture. The influence of the aeration rate on every type of heat loss was characterized. Finally, the model was used to evaluate the impacts on material temperature caused by the change of the insulation thickness, the ambient temperature, take the lid away, the increase or the decrease of the mass of waste to compost.« less

Secondhand Trees, Firsthand Learning. Holiday Evergreens Revitalized.

ERIC Educational Resources Information Center

Graves, C. John

1990-01-01

Described is an activity that uses discarded evergreen trees from Christmas. Tree age and growth characteristics are investigated by looking at the number of whorls and rings of the trunks. Extensions and follow-up activities are included. (KR)

Toward New Horizons. Volume 7. Aircraft Fuels and Propellants

DTIC Science & Technology

1946-05-01

energy in the exhaust gas. At the high -power rich condition, a relatively large amount of chemical heat is discarded in the form of unburned carbon...mental studies on the preparation, properties, and methods of use of low-weight high - energy -producing materials, such as metallic hydrides, atomic and...LIMITED POWER The foregoing discussion has been predicated upon the need for a plentiful liquid fuel of high energy content and more particularly upon

Hong Kong and Beijing: Trip Report

DTIC Science & Technology

1992-05-01

Kongs. He has grafted basic elements of capitalism (material incentives, individual enterprise and market economy) on to the four cardinal principles of...34let us try share ownership and stock markets -- if they fail, we shall discard them." His opponents charge that he is selling out to capitalism, but...stores, high-rises, bars and an Arnie Palmer golf course. This Special Economic Zone makes Mickey Mouse toys, Adidas sweat pants, Yashica cameras and a

E-RECOV, Electrochemical Recycling Electronic Constituents of Value

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lister, Tedd

Methods for handling electronic waste have failed to keep pace with the world’s growing use of electronics. Recycling is not only an opportunity to reclaim valuable metals for new products, it’s also a responsible way to keep outdated electronics from ending up in unwanted places. The U.S. Department of Energy’s Critical Materials Institute has helped researchers at Idaho National Laboratory develop an economically and sound solution to discarding electronics.

Plasma methods for metals recovery from metal-containing waste.

PubMed

Changming, Du; Chao, Shang; Gong, Xiangjie; Ting, Wang; Xiange, Wei

2018-04-27

Metal-containing waste, a kind of new wastes, has a great potential for recycling and is also difficult to deal with. Many countries pay more and more attention to develop the metal recovery process and equipment of this kind of waste as raw material, so as to solve the environmental pollution and comprehensively utilize the discarded metal resources. Plasma processing is an efficient and environmentally friendly way for metal-containing waste. This review mainly discuss various metal-containing waste types, such as printed circuit boards (PCBs), red mud, galvanic sludge, Zircon, aluminium dross and incinerated ash, and the corresponding plasma methods, which include DC extended transferred arc plasma reactor, DC non-transferred arc plasma torch, RF thermal plasma reactor and argon and argon-hydrogen plasma jets. In addition, the plasma arc melting technology has a better purification effect on the extraction of useful metals from metal-containing wastes, a great capacity of volume reduction of waste materials, and a low leaching toxicity of solid slag, which can also be used to deal with all kinds of metal waste materials, having a wide range of applications. Copyright © 2018 Elsevier Ltd. All rights reserved.

Detailed Characterization of Human Induced Pluripotent Stem Cells Manufactured for Therapeutic Applications.

PubMed

Baghbaderani, Behnam Ahmadian; Syama, Adhikarla; Sivapatham, Renuka; Pei, Ying; Mukherjee, Odity; Fellner, Thomas; Zeng, Xianmin; Rao, Mahendra S

2016-08-01

We have recently described manufacturing of human induced pluripotent stem cells (iPSC) master cell banks (MCB) generated by a clinically compliant process using cord blood as a starting material (Baghbaderani et al. in Stem Cell Reports, 5(4), 647-659, 2015). In this manuscript, we describe the detailed characterization of the two iPSC clones generated using this process, including whole genome sequencing (WGS), microarray, and comparative genomic hybridization (aCGH) single nucleotide polymorphism (SNP) analysis. We compare their profiles with a proposed calibration material and with a reporter subclone and lines made by a similar process from different donors. We believe that iPSCs are likely to be used to make multiple clinical products. We further believe that the lines used as input material will be used at different sites and, given their immortal status, will be used for many years or even decades. Therefore, it will be important to develop assays to monitor the state of the cells and their drift in culture. We suggest that a detailed characterization of the initial status of the cells, a comparison with some calibration material and the development of reporter sublcones will help determine which set of tests will be most useful in monitoring the cells and establishing criteria for discarding a line.

Early LROC Views of Lunar 'Heritage' Sites

NASA Astrophysics Data System (ADS)

Stooke, P. J.

2010-03-01

Early LROC images show some old hardware locations including Apollo and Surveyor sites. The images are used to improve EVA traverse maps and to identify the discarded Surveyor 3 retro-rocket. Future opportunities to observe other items are discussed.

Global challenges for e-waste management: the societal implications.

PubMed

Magalini, Federico

2016-03-01

Over the last decades the electronics industry and ICT Industry in particular has revolutionized the world: electrical and electronic products have become ubiquitous in today's life around the planet. After use, those products are discarded, sometimes after re-use cycles in countries different from those where they were initially sold; becoming what is commonly called e-waste. Compared to other traditional waste streams, e-waste handling poses unique and complex challenges. e-Waste is usually regarded as a waste problem, which can cause environmental damage and severe human health consequences if not safely managed. e-Waste contains significant amounts of toxic and environmentally sensitive materials and is, thus, extremely hazardous to humans and the environment if not properly disposed of or recycled. On the other hand, e-waste is often seen as a potential source of income for individuals and entrepreneurs who aim to recover the valuable materials (metals in particular) contained in discarded equipment. Recently, for a growing number of people, in developing countries in particular, recycling and separation of e-waste has become their main source of income. In most cases, this is done informally, with no or hardly any health and safety standards, exposing workers and the surrounding neighborhoods to extensive health dangers as well as leading to substantial environmental pollution. Treatment processes of e-waste aim to remove the hazardous components and recover as much reusable material (e.g. metals, glass and plastics) as possible; achieving both objectives is most desired. The paper discuss societal implications of proper e-waste management and key elements to be considered in the policy design at country level.

Utility of applying quality assessment tools for kidneys with KDPI ≥80

PubMed Central

Doshi, Mona D.; Reese, Peter P.; Hall, Isaac E.; Schröppel, Bernd; Ficek, Joseph; Formica, Richard N.; Weng, Francis L.; Hazs, Rick D.; Philbrook, Heather Thiessen; Parikh, Chirag

2016-01-01

Background Kidneys with “high” kidney donor profile index (KDPI) are often biopsied and pumped, yet frequently discarded. Methods In this multicenter study, we describe the characteristics and outcomes of kidneys with KDPI ≥80 that were procured from 338 deceased donors. We excluded donors with anatomical kidney abnormalities. Results Donors were categorized by the number of kidneys discarded: 1) none (n=154, 46%), 2) 1 discarded and 1 transplanted (n=48, 14%), 3) both discarded (n=136, 40%). Donors in group 3 were older, more often white, and had higher terminal creatinine and KDPI than group 1 (all p<0.05). Biopsy was performed in 92% of all kidneys, and 47% were pumped. Discard was associated with biopsy findings and 1st hour renal resistance. Kidney injury biomarker levels (NGAL, IL-18, and KIM-1 measured from donor urine at procurement and from perfusate soon after pump perfusion) were not different between groups. There was no significant difference in 1-year estimated glomerular filtration rate (eGFR) or graft failure between groups 1 and 2 (41.5±18 vs. 41.4±22 mL/min/1.73m2; p=0.97 and 9% vs. 10%; p=0.76). Conclusions Kidneys with KDPI ≥80 comprise the most resource consuming fraction of our donor kidney pool and have the highest rates of discard. Our data suggest that some discarded kidneys with KDPI ≥80 are viable; however, current tools and urine- and perfusate-biomarkers to identify these viable kidneys are not satisfactory. We need better methods to assess viability of kidneys with high KDPI. PMID:27490414

Effects of cryptic mortality and the hidden costs of using length limits in fishery management

USGS Publications Warehouse

Coggins, L.G.; Catalano, M.J.; Allen, M.S.; Pine, William E.; Walters, C.J.

2007-01-01

Fishery collapses cause substantial economic and ecological harm, but common management actions often fail to prevent overfishing. Minimum length limits are perhaps the most common fishing regulation used in both commercial and recreational fisheries, but their conservation benefits can be influenced by discard mortality of fish caught and released below the legal length. We constructed a computer model to evaluate how discard mortality could influence the conservation utility of minimum length regulations. We evaluated policy performance across two disparate fish life-history types: short-lived high-productivity (SLHP) and long-lived low-productivity (LLLP) species. For the life-history types, fishing mortality rates and minimum length limits that we examined, length limits alone generally failed to achieve sustainability when discard mortality rate exceeded about 0.2 for SLHP species and 0.05 for LLLP species. At these levels of discard mortality, reductions in overall fishing mortality (e.g. lower fishing effort) were required to prevent recruitment overfishing if fishing mortality was high. Similarly, relatively low discard mortality rates (>0.05) rendered maximum yield unobtainable and caused a substantial shift in the shape of the yield response surfaces. An analysis of fishery efficiency showed that length limits caused the simulated fisheries to be much less efficient, potentially exposing the target species and ecosystem to increased negative effects of the fishing process. Our findings suggest that for overexploited fisheries with moderate-to-high discard mortality rates, reductions in fishing mortality will be required to meet management goals. Resource managers should carefully consider impacts of cryptic mortality sources (e.g. discard mortality) on fishery sustainability, especially in recreational fisheries where release rates are high and effort is increasing in many areas of the world. ?? 2007 Blackwell Publishing Ltd.

A Geometric Model for Specularity Prediction on Planar Surfaces with Multiple Light Sources.

PubMed

Morgand, Alexandre; Tamaazousti, Mohamed; Bartoli, Adrien

2018-05-01

Specularities are often problematic in computer vision since they impact the dynamic range of the image intensity. A natural approach would be to predict and discard them using computer graphics models. However, these models depend on parameters which are difficult to estimate (light sources, objects' material properties and camera). We present a geometric model called JOLIMAS: JOint LIght-MAterial Specularity, which predicts the shape of specularities. JOLIMAS is reconstructed from images of specularities observed on a planar surface. It implicitly includes light and material properties, which are intrinsic to specularities. This model was motivated by the observation that specularities have a conic shape on planar surfaces. The conic shape is obtained by projecting a fixed quadric on the planar surface. JOLIMAS thus predicts the specularity using a simple geometric approach with static parameters (object material and light source shape). It is adapted to indoor light sources such as light bulbs and fluorescent lamps. The prediction has been tested on synthetic and real sequences. It works in a multi-light context by reconstructing a quadric for each light source with special cases such as lights being switched on or off. We also used specularity prediction for dynamic retexturing and obtained convincing rendering results. Further results are presented as supplementary video material, which can be found on the Computer Society Digital Library at http://doi.ieeecomputersociety.org/10.1109/TVCG.2017.2677445.

Production of a Novel OX40 Ligand for Clinical Use

DTIC Science & Technology

2012-10-01

inhibitory to the detection of mycoplasma. 19.0 TECHNICAL REFERENCES 19.1 Barile , Michael F. and McGarrity, Gerard J. (1983). "Isolation of Mycoplasmas from...Edition, Section 2.6.7, Mycoplasmas. 19.4 McGarrity, Gerard J. and Barile , Michael F. (1983). "Use of Indicator Cell Lines for Recovery and...test material will be discarded following study completion unless otherwise requested by Sponsor. 20.0 REFERENCES 20.1 Barile , Michael F. and

Preparation of brightness stabilization agent for lignin containing pulp from biomass pyrolysis oils

DOEpatents

Agblevor, Foster A.; Besler-Guran, Serpil

2001-01-01

A process for producing a brightness stabilization mixture of water-soluble organic compounds from biomass pyrolysis oils comprising: a) size-reducing biomass material and pyrolyzing the size-reduced biomass material in a fluidized bed reactor; b) separating a char/ash component while maintaining char-pot temperatures to avoid condensation of pyrolysis vapors; c) condensing pyrolysis gases and vapors, and recovering pyrolysis oils by mixing the oils with acetone to obtain an oil-acetone mixture; d) evaporating acetone and recovering pyrolysis oils; e) extracting the pyrolysis oils with water to obtain a water extract; f) slurrying the water extract with carbon while stirring, and filtering the slurry to obtain a colorless filtrate; g) cooling the solution and stabilizing the solution against thermally-induced gelling and solidification by extraction with ethyl acetate to form an aqueous phase lower layer and an organic phase upper layer; h) discarding the upper organic layer and extracting the aqueous layer with ethyl acetate, and discarding the ethyl acetate fraction to obtain a brown-colored solution not susceptible to gelling or solidification upon heating; i) heating the solution to distill off water and other light components and concentrating a bottoms fraction comprising hydroxyacetaldehyde and other non-volatile components having high boiling points; and j) decolorizing the stabilized brown solution with activated carbon to obtain a colorless solution.

High-performance green flexible electronics based on biodegradable cellulose nanofibril paper

PubMed Central

Jung, Yei Hwan; Chang, Tzu-Hsuan; Zhang, Huilong; Yao, Chunhua; Zheng, Qifeng; Yang, Vina W.; Mi, Hongyi; Kim, Munho; Cho, Sang June; Park, Dong-Wook; Jiang, Hao; Lee, Juhwan; Qiu, Yijie; Zhou, Weidong; Cai, Zhiyong; Gong, Shaoqin; Ma, Zhenqiang

2015-01-01

Today's consumer electronics, such as cell phones, tablets and other portable electronic devices, are typically made of non-renewable, non-biodegradable, and sometimes potentially toxic (for example, gallium arsenide) materials. These consumer electronics are frequently upgraded or discarded, leading to serious environmental contamination. Thus, electronic systems consisting of renewable and biodegradable materials and minimal amount of potentially toxic materials are desirable. Here we report high-performance flexible microwave and digital electronics that consume the smallest amount of potentially toxic materials on biobased, biodegradable and flexible cellulose nanofibril papers. Furthermore, we demonstrate gallium arsenide microwave devices, the consumer wireless workhorse, in a transferrable thin-film form. Successful fabrication of key electrical components on the flexible cellulose nanofibril paper with comparable performance to their rigid counterparts and clear demonstration of fungal biodegradation of the cellulose-nanofibril-based electronics suggest that it is feasible to fabricate high-performance flexible electronics using ecofriendly materials. PMID:26006731

High-performance green flexible electronics based on biodegradable cellulose nanofibril paper.

PubMed

Jung, Yei Hwan; Chang, Tzu-Hsuan; Zhang, Huilong; Yao, Chunhua; Zheng, Qifeng; Yang, Vina W; Mi, Hongyi; Kim, Munho; Cho, Sang June; Park, Dong-Wook; Jiang, Hao; Lee, Juhwan; Qiu, Yijie; Zhou, Weidong; Cai, Zhiyong; Gong, Shaoqin; Ma, Zhenqiang

2015-05-26

Today's consumer electronics, such as cell phones, tablets and other portable electronic devices, are typically made of non-renewable, non-biodegradable, and sometimes potentially toxic (for example, gallium arsenide) materials. These consumer electronics are frequently upgraded or discarded, leading to serious environmental contamination. Thus, electronic systems consisting of renewable and biodegradable materials and minimal amount of potentially toxic materials are desirable. Here we report high-performance flexible microwave and digital electronics that consume the smallest amount of potentially toxic materials on biobased, biodegradable and flexible cellulose nanofibril papers. Furthermore, we demonstrate gallium arsenide microwave devices, the consumer wireless workhorse, in a transferrable thin-film form. Successful fabrication of key electrical components on the flexible cellulose nanofibril paper with comparable performance to their rigid counterparts and clear demonstration of fungal biodegradation of the cellulose-nanofibril-based electronics suggest that it is feasible to fabricate high-performance flexible electronics using ecofriendly materials.

High-performance green flexible electronics based on biodegradable cellulose nanofibril paper

NASA Astrophysics Data System (ADS)

Jung, Yei Hwan; Chang, Tzu-Hsuan; Zhang, Huilong; Yao, Chunhua; Zheng, Qifeng; Yang, Vina W.; Mi, Hongyi; Kim, Munho; Cho, Sang June; Park, Dong-Wook; Jiang, Hao; Lee, Juhwan; Qiu, Yijie; Zhou, Weidong; Cai, Zhiyong; Gong, Shaoqin; Ma, Zhenqiang

2015-05-01

Today's consumer electronics, such as cell phones, tablets and other portable electronic devices, are typically made of non-renewable, non-biodegradable, and sometimes potentially toxic (for example, gallium arsenide) materials. These consumer electronics are frequently upgraded or discarded, leading to serious environmental contamination. Thus, electronic systems consisting of renewable and biodegradable materials and minimal amount of potentially toxic materials are desirable. Here we report high-performance flexible microwave and digital electronics that consume the smallest amount of potentially toxic materials on biobased, biodegradable and flexible cellulose nanofibril papers. Furthermore, we demonstrate gallium arsenide microwave devices, the consumer wireless workhorse, in a transferrable thin-film form. Successful fabrication of key electrical components on the flexible cellulose nanofibril paper with comparable performance to their rigid counterparts and clear demonstration of fungal biodegradation of the cellulose-nanofibril-based electronics suggest that it is feasible to fabricate high-performance flexible electronics using ecofriendly materials.

Oxygen-rich hierarchical porous carbon made from pomelo peel fiber as electrode material for supercapacitor

NASA Astrophysics Data System (ADS)

Li, Jing; Liu, Wenlong; Xiao, Dan; Wang, Xinhui

2017-09-01

Oxygen-rich hierarchical porous carbon has been fabricated using pomelo peel fiber as a carbon source via an improved KOH activation method. The morphology and chemical composition of the obtained carbon materials were characterized by X-ray diffraction (XRD), X-ray photoelectron spectra (XPS), electron microscopy (EM), Raman spectra and elemental analysis. The unique porous structure with abundant oxygen functional groups is favorable to capacitive behavior, and the as-prepared carbon material exhibits high specific capacitance of 222.6 F g-1 at 0.5 A g-1 in 6 M KOH and superior stability over 5000 cycles. This work not only describes a simple way to prepare high-performance carbon material from the discarded pomelo peel, but also provides a strategy for its disposal issue and contributes to the environmental improvement.

Immediate Regrafting of the Split Thickness Skin Graft Donor Site Assists Healing.

PubMed

Bradow, Brian P; Hallock, Geoffrey G; Wilcock, Samuel P

2017-05-01

Delayed or even lack of healing of a split-thickness skin graft (STSG) donor site is a potential problem with elderly patients or those with poor wound healing capabilities. A proactive solution that may minimize this risk is to regraft that donor site using otherwise discarded skin graft remnants. A prospective, nonrandomized, consecutive study was designed to compare the time to healing of the commonly used anterior thigh STSG donor site in patients who had routine dressings (n = 113) versus those with comorbidities known to adversely affect wound healing and had planned regrafting (n = 204). Those comorbidities included age (≥65 years), diabetes mellitus, peripheral vascular disease, chronic renal disease, and chronic steroid use. The average number of comorbidities in the regrafted subgroup versus those not regrafted was 1.41 and 0.31, respectively. This was considered to be a significant difference ( P < 0.0001) confirming the validity in predicting patients at risk for adverse donor-site healing that would benefit by regrafting. The mean time required for donor-site reepithelialization of those regrafted was 17.2 days compared with 17.8 days for those not regrafted ( P = 0.2395), which was not significantly different. Regrafting the STSG donor site of patients with known comorbidities, that is, those expected to have delayed healing in general, had a mean time to reepithelialization comparable with conventionally treated individuals. This was considered a direct consequence of recycling rather than discarding any excess skin graft materials when so indicated and can be a proactive solution to a potentially cumbersome dilemma.

What Is A Homosexual? A Definitional Model.

ERIC Educational Resources Information Center

Berger, Raymond M.

1983-01-01

Presents a definitional model to explain homosexuality and discusses its implications for practice. Contends that social workers must discard the traditional binary model of hetersexual versus homesexual for one incorporating relevant psychosocial factors including life experiences, social reaction, and association with others. (Author/JAC)

50 CFR 660.11 - General definitions.

Code of Federal Regulations, 2011 CFR

2011-10-01

...-related mortality including landings, discard mortality, research catches, and catches in exempted fishing..., projected research catch, deductions for fishing mortality in non-groundfish fisheries, as necessary, and...) Scientific research activity. (See § 600.10 of this chapter) Secretary. (See § 600.10 of this chapter...

50 CFR 660.11 - General definitions.

Code of Federal Regulations, 2012 CFR

2012-10-01

...-related mortality including landings, discard mortality, research catches, and catches in exempted fishing... Tribes, projected research catch, deductions for fishing mortality in non-groundfish fisheries, as...) Scientific research activity. (See § 600.10 of this chapter) Secretary. (See § 600.10 of this chapter...

50 CFR 660.11 - General definitions.

Code of Federal Regulations, 2014 CFR

2014-10-01

...-related mortality including landings, discard mortality, research catches, and catches in exempted fishing... treaty Indian Tribes, projected research catch, deductions for fishing mortality in non-groundfish...) Scientific research activity. (See § 600.10 of this chapter) Secretary. (See § 600.10 of this chapter...

Fabrication of Simple Indoor Air Haze Purifier using Domestic Discarded Substances and Its Haze Removal Performance

NASA Astrophysics Data System (ADS)

Wang, Zhou; Cao, Haoshu; Zhao, Shuang

2018-01-01

Based on the concept of circular economy, discarded plastic bottles stuffed with discarded cotton, clothing and sofa cushion were used as pre-filter to remove big particles (dust and coal dust) in air and 4 L tap water in discarded plastic bottle was worked as an absorbing medium to dissolve the water soluble ions in air (SO4 2-, NO3-, NH4+, Cl- and Ca2+). Moreover, the internet control design was used in this homemade indoor air haze purifier to achieve the performance of remote control and intelligent management. The experimental results showed that this indoor air haze purifier can effectively reduce the level of indoor air haze and the air quality after 20 minutes treatment is higher than that of two commercial well-known air haze purifier

Reducing space overhead for independendent checkpointing

NASA Technical Reports Server (NTRS)

Wang, Yi-Min; Chung, Pi-Yu; Lin, In-Jen; Fuchs, W. Kent

1992-01-01

The main disadvantages of independent checkpointing are the possible domino effect and the associated storage space overhead for maintaining multiple checkpoints. In most previous work, it has been assumed that only the checkpoints older than the current global recovery line can be discarded. Here, we generalize a notion of recovery line to potential recovery line. Only the checkpoints belonging to at least one of the potential recovery lines cannot be discarded. By using the model of maximum-sized antichains on a partially ordered set, an efficient algorithm is developed for finding all non-discardable checkpoints, and we show that the number of non-discardable checkpoints cannot exceed N(N+1)/2, where N is the number of processors. Communication trace driven simulation for several hypercube programs is performed to show the benefit of the proposed algorithm for real applications.

The 24-hour normothermic machine perfusion of discarded human liver grafts.

PubMed

Vogel, Thomas; Brockmann, Jens G; Quaglia, Alberto; Morovat, Alireza; Jassem, Wayel; Heaton, Nigel D; Coussios, Constantin C; Friend, Peter J

2017-02-01

Donor organ shortage necessitates use of less than optimal donor allografts for transplantation. The current cold storage preservation technique fails to preserve marginal donor grafts sufficiently. Evidence from large animal experiments suggests superiority of normothermic machine preservation (NMP) of liver allografts. In this study, we analyze discarded human liver grafts that underwent NMP for the extended period of 24 hours. Thirteen human liver grafts which had been discarded for transplantation were entered into this study. Perfusion was performed with an automated device using an oxygenated, sanguineous perfusion solution at normothermia. Automated control was incorporated for temperature-, flow-, and pressure-regulation as well as oxygenation. All livers were perfused for 24 hours; parameters of biochemical and synthetic liver function as well as histological parameters of liver damage were analyzed. Livers were stratified for expected viability according to the donor's medical history, procurement data, and their macroscopic appearance. Normothermic perfusion preservation of human livers for 24 hours was shown to be technically feasible. Human liver grafts, all of which had been discarded for transplantation, showed levels suggesting organ viability with respect to metabolic and synthetic liver function (to varying degrees). There was positive correlation between instantly available perfusion parameters and generally accepted predictors of posttransplant graft survival. In conclusion, NMP is feasible reliably for periods of at least 24 hours, even in highly suboptimal donor organs. Potential benefits include not only viability testing (as suggested in recent clinical implementations), but also removal of the time constraints associated with the utilization of high-risk livers, and recovery of ischemic and other preretrieval injuries (possibly by enabling therapeutic strategies during NMP). Liver Transplantation 23 207-220 2017 AASLD. © 2016 by the American Association for the Study of Liver Diseases.

The probability of transportation accidents

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brobst, W.A.

1972-11-10

We examined the relative safety of different modes of transportation from a statistical basis, rather than an emotional one. As we were collecting data and evaluating its applicability, we found that our own emotions came into play in judging which data would be useful and which data we should discard. We developed a methodology of simple data analysis that would lend itself to similar evaluations to questions. The author described that methodology, and demonstrated its application to shipments of radioactive materials. 31 refs., 7 tabs/

HS3D, A Dataset of Homo Sapiens Splice Regions, and its Extraction Procedure from a Major Public Database

NASA Astrophysics Data System (ADS)

Pollastro, Pasquale; Rampone, Salvatore

The aim of this work is to describe a cleaning procedure of GenBank data, producing material to train and to assess the prediction accuracy of computational approaches for gene characterization. A procedure (GenBank2HS3D) has been defined, producing a dataset (HS3D - Homo Sapiens Splice Sites Dataset) of Homo Sapiens Splice regions extracted from GenBank (Rel.123 at this time). It selects, from the complete GenBank Primate Division, entries of Human Nuclear DNA according with several assessed criteria; then it extracts exons and introns from these entries (actually 4523 + 3802). Donor and acceptor sites are then extracted as windows of 140 nucleotides around each splice site (3799 + 3799). After discarding windows not including canonical GT-AG junctions (65 + 74), including insufficient data (not enough material for a 140 nucleotide window) (686 + 589), including not AGCT bases (29 + 30), and redundant (218 + 226), the remaining windows (2796 + 2880) are reported in the dataset. Finally, windows of false splice sites are selected by searching canonical GT-AG pairs in not splicing positions (271 937 + 332 296). The false sites in a range +/- 60 from a true splice site are marked as proximal. HS3D, release 1.2 at this time, is available at the Web server of the University of Sannio: http://www.sci.unisannio.it/docenti/rampone/.

Electronic scraps--recovering of valuable materials from parallel wire cables.

PubMed

de Araújo, Mishene Christie Pinheiro Bezerra; Chaves, Arthur Pinto; Espinosa, Denise Crocce Romano; Tenório, Jorge Alberto Soares

2008-11-01

Every year, the number of discarded electro-electronic products is increasing. For this reason recycling is needed, to avoid wasting non-renewable natural resources. The objective of this work is to study the recycling of materials from parallel wire cable through unit operations of mineral processing. Parallel wire cables are basically composed of polymer and copper. The following unit operations were tested: grinding, size classification, dense medium separation, electrostatic separation, scrubbing, panning, and elutriation. It was observed that the operations used obtained copper and PVC concentrates with a low degree of cross contamination. It was concluded that total liberation of the materials was accomplished after grinding to less than 3 mm, using a cage mill. Separation using panning and elutriation presented the best results in terms of recovery and cross contamination.

Natural radionuclide concentrations in processed materials from Thai mineral industries.

PubMed

Chanyotha, S; Kranrod, C; Chankow, N; Kritsananuwat, R; Sriploy, P; Pangza, K

2012-11-01

The naturally occurring radioactive materials (NORMs) distributed in products, by-products and waste produced from Thai mineral industries were investigated. Samples were analysed for radioactivity concentrations of two principal NORM isotopes: (226)Ra and (228)Ra. The enrichment of NORM was found to occur during the treatment process of some minerals. The highest activity of (226)Ra (7 × 10(7) Bq kg(-1)) was in the scale from tantalum processing. The radium concentration in the discarded by-product material from metal ore dressing was also enriched by 3-10 times. Phosphogypsum, a waste produced from the production of phosphate fertilisers, contained 700 times the level of (226)Ra concentration found in phosphate ore. Hence, these residues were also sources of exposure to workers and the public, which needed to be controlled.

Incorporating waste into an experimental school prototype: lessons regarding materials reclamation opportunities.

PubMed

Yeap, Kong Seng; Mohd Yaacob, Naziaty; Rao, Sreenivasaiah Purushothama; Hashim, Nor Rasidah

2012-12-01

This article presents lessons learned from a design project that explored the possibility of incorporating waste into the design of a school prototype. The authors worked with professional architects, a waste artist, environmental scientists and local waste operators to uncover new uses and applications for discarded items. As a result, bottles, aluminium cans, reclaimed doors, crushed concrete and second-hand bricks, etc. were identified, explored and integrated into the architectural design. This article serves as a catalyst that advocates the use of reclaimed materials in the field of design and planning. In particular, it highlights the challenges and issues that need to be addressed in carrying out design work with waste. Designers and practitioners interested in minimizing waste generation by proposing the use of reclaimed materials will find this article useful.

50 CFR 660.11 - General definitions.

Code of Federal Regulations, 2013 CFR

2013-10-01

...-related mortality including landings, discard mortality, research catches, and catches in exempted fishing..., any allocation or projected catch for the Pacific Coast treaty Indian Tribes, projected research catch...) Scientific research activity. (See § 600.10 of this chapter) Secretary. (See § 600.10 of this chapter...

Is Decoupling GDP Growth from Environmental Impact Possible?

PubMed

Ward, James D; Sutton, Paul C; Werner, Adrian D; Costanza, Robert; Mohr, Steve H; Simmons, Craig T

2016-01-01

The argument that human society can decouple economic growth-defined as growth in Gross Domestic Product (GDP)-from growth in environmental impacts is appealing. If such decoupling is possible, it means that GDP growth is a sustainable societal goal. Here we show that the decoupling concept can be interpreted using an easily understood model of economic growth and environmental impact. The simple model is compared to historical data and modelled projections to demonstrate that growth in GDP ultimately cannot be decoupled from growth in material and energy use. It is therefore misleading to develop growth-oriented policy around the expectation that decoupling is possible. We also note that GDP is increasingly seen as a poor proxy for societal wellbeing. GDP growth is therefore a questionable societal goal. Society can sustainably improve wellbeing, including the wellbeing of its natural assets, but only by discarding GDP growth as the goal in favor of more comprehensive measures of societal wellbeing.

Method for recovering and using lignin in adhesive resins by extracting demethylated lignin

DOEpatents

Schroeder, Herbert A.

1991-01-01

Lignin, or a lignin derived material, which has been significantly demethylated (e.g., the demethylated lignin found in the raffinate produced as a by-product of dimethyl sulfide production which can be carried out using the spent liquor from wood pulping operations) can be isolated by a process wherein an organic solvent is added to a lignin-containing aqueous solution. The organic solvent is typically a polar, and at least a partially water-immiscible substance such as, for example, ethyl acetate. The resulting lignin-containing aqueous solution/organic solvent mixture is acidified to produce a water layer which is discarded and an organic solvent layer which contains the demethylated lignin. Upon its recovery, the demethylated lignin is dissolved in an alkaline solution to which an aldehyde source is added to produce a resol-type resin. The aldehyde source may be formaldehyde in solution, paraformaldehyde, hexamethylenetetramine, or other aldehydes including acetaldehyde, furfural, and their derivatives.

Method for recovering and using lignin in adhesive resins

DOEpatents

Schroeder, Herbert A.

1993-01-01

Lignin, or a lignin derived material, which has been significantly demethylated (e.g., the demethylated lignin found in the raffinate produced as a by-product of dimethyl sulfide production which can be carried out using the spent liquor from wood pulping operations) can be isolated by a process wherein an organic solvent is added to a lignin-containing aqueous solution. The organic solvent is typically a polar, and at least a partially water-immiscible substance such as, for example, ethyl acetate. The resulting lignin-containing aqueous solution/organic solvent mixture is acidified to produce a water layer which is discarded and an organic solvent layer which contains the demethylated lignin. Upon its recovery, the demethylated lignin is dissolved in an alkaline solution to which an aldehyde source is added to produce a resol-type resin. The aldehyde source may be formaldehyde in solution, paraformaldehyde, hexamethylenetetramine, or other aldehydes including acetaldehyde, furfural, and their derivatives.

Hazardous waste: cleanup and prevention

USGS Publications Warehouse

Vandas, Stephen; Cronin, Nancy L.; Farrar, Frank; Serrano, Guillermo Eliezer Ávila; Yajimovich, Oscar Efraín González; Muñoz, Aurora R.; Rivera, María del C.

1996-01-01

Our lifestyles are supported by complex Industrial activities that produce many different chemicals and chemical wastes. The Industries that produce our clothing, cars, medicines, paper, food, fuels, steel, plastics, and electric components use and discard thousands of chemicals every year. At home we may use lawn chemicals, solvents, disinfectants, cleaners, and auto products to Improve our quality of life. A chemical that presents a threat or unreasonable risk to people or the environment Is a hazardous material. When a hazardous material can no longer be used, It becomes a hazardous waste. Hazardous wastes come from a variety of sources, from both present and past activities. Impacts to human health and the environment can result from Improper handling and disposal of hazardous waste.

Sustainable Potassium-Ion Battery Anodes Derived from Waste-Tire Rubber

DOE Office of Scientific and Technical Information (OSTI.GOV)

Li, Yunchao; Adams, Ryan A.; Arora, Anjela

The recycling of waste-tire rubber is of critical importance since the discarded tires pose serious environmental and health hazards to our society. Here, we report a new application for hard-carbon materials derived from waste-tires as anodes in potassium-ion batteries. The sustainable tire-derived carbons show good reversible potassium insertion at relatively high rates. Long-term stability tests exhibit capacities of 155 and 141 mAh g –1 for carbon pyrolyzed at 1100°C and 1600°C, respectively, after 200 cycles at current rate of C/2. As a result, this study provides an alternative solution for inexpensive and environmental benign potassium-ion battery anode materials.

Sustainable Potassium-Ion Battery Anodes Derived from Waste-Tire Rubber

DOE PAGES

Li, Yunchao; Adams, Ryan A.; Arora, Anjela; ...

2017-04-13

The recycling of waste-tire rubber is of critical importance since the discarded tires pose serious environmental and health hazards to our society. Here, we report a new application for hard-carbon materials derived from waste-tires as anodes in potassium-ion batteries. The sustainable tire-derived carbons show good reversible potassium insertion at relatively high rates. Long-term stability tests exhibit capacities of 155 and 141 mAh g –1 for carbon pyrolyzed at 1100°C and 1600°C, respectively, after 200 cycles at current rate of C/2. As a result, this study provides an alternative solution for inexpensive and environmental benign potassium-ion battery anode materials.

The Role of Procurement Biopsies in Acceptance Decisions for Kidneys Retrieved for Transplant

PubMed Central

Stewart, Darren E.; Bista, Bipin R.; Salkowski, Nicholas; Snyder, Jon J.; Israni, Ajay K.; Crary, Gretchen S.; Rosendale, John D.; Matas, Arthur J.; Delmonico, Francis L.

2014-01-01

Background and objectives There is a shortage of kidneys for transplant, and many patients on the deceased donor kidney transplant waiting list would likely benefit from kidneys that are currently being discarded. In the United States, the most common reason given for discarding kidneys retrieved for transplant is procurement biopsy results. This study aimed to compare biopsy results from discarded kidneys with discard attributed to biopsy findings, with biopsy results from comparable kidneys that were successfully transplanted. Design, setting, participants, & measurements In this retrospective, observational, case-control study, biopsy reports were examined from 83 kidneys discarded in 2010 due to biopsy findings (cases), 83 contralateral transplanted kidneys from the same donor (contralateral controls), and 83 deceased donors randomly matched to cases by donor risk profile (randomly matched controls). A second procurement biopsy was obtained in 64 of 332 kidneys (19.3%). Results The quality of biopsy reports was low, with amounts of tubular atrophy, interstitial inflammation, arteriolar hyalinosis, and acute tubular necrosis often not indicated; 69% were wedge biopsies and 94% used frozen tissue. The correlation between first and second procurement biopsies was poor; only 25% of the variability (R2) in glomerulosclerosis was explained by biopsies being from the same kidney. The percentages of glomerulosclerosis overlapped substantially between cases, contralateral controls, and randomly matched controls: 17.1%±15.3%, 9.0%±6.6%, and 5.0%±5.9%, respectively. Of all biopsy findings, only glomerulosclerosis>20% was independently correlated with discard (cases versus contralateral controls; odds ratio, 15.09; 95% confidence interval, 2.47 to 92.41; P=0.003), suggesting that only this biopsy result was used in acceptance decisions. One-year graft survival was 79.5% and 90.7% in contralateral and randomly matched controls, respectively, versus 91.6% among all deceased donor transplants in the Scientific Registry of Transplant Recipients. Conclusions Routine use of biopsies could lead to unnecessary kidney discards. PMID:24558053

Biting off more than you can chew: sexual selection on the free amino acid composition of the spermatophylax in decorated crickets

PubMed Central

Gershman, Susan N.; Mitchell, Christopher; Sakaluk, Scott K.; Hunt, John

2012-01-01

Nuptial food gifts function to enhance male fertilization success, but their consumption is not always beneficial to females. In decorated crickets, the spermatophore transferred at mating includes a gelatinous mass, the spermatophylax, which is consumed by females after mating. However, females often discard spermatophylaxes shortly after mating, whereupon they terminate sperm transfer. We hypothesized that females discard gifts based on their assessment of the gift itself, and specifically the composition of free amino acids. We tested this hypothesis by comparing spermatophylaxes discarded by females after mating with those that were destined to be fully consumed, and employed multivariate selection analysis to quantify the strength and form of multivariate sexual selection operating on the free amino acid composition of gifts. The analysis yielded a saddle-shaped fitness surface with two local peaks. Different amino acid profiles appear to elicit continued feeding on the spermatophylax either because they offer the same level of gustatory appeal, or because they differentially affect both the gustatory appeal and texture of the spermatophylax. We conclude that the gustatory response of females to males' nuptial food gifts represents an important avenue of post-copulatory mate choice, imposing significant sexual selection on the free amino acid composition of the spermatophylax. PMID:22357263

75 FR 70213 - Gulf of Mexico Fishery Management Council; Public Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-17

... was used. In addition, the original update assessment estimated dead discards from the commercial gag.... However, more recent estimates of dead discards based on observer data have been on the order of 200,000...

Bioaccumulation of chemical warfare agents, energetic materials, and metals in deep-sea shrimp from discarded military munitions sites off Pearl Harbor

NASA Astrophysics Data System (ADS)

Koide, Shelby; Silva, Jeff A. K.; Dupra, Vilma; Edwards, Margo

2016-06-01

The bioaccumulation of munitions-related chemicals at former military deep-water disposal sites is poorly understood. This paper presents the results of human-food-item biota sampling to assess the potential for bioaccumulation of chemical warfare agents, energetic materials, arsenic, and additional munitions-related metals in deep-sea shrimp tissue samples collected during the Hawai'i Undersea Military Munitions Assessment (HUMMA) project to date. The HUMMA investigation area is located within a former munitions sea-disposal site located south of Pearl Harbor on the island of O'ahu, Hawai'i, designated site Hawaii-05 (HI-05) by the United States Department of Defense. Indigenous deep-sea shrimp (Heterocarpus ensifer) were caught adjacent to discarded military munitions (DMM) and at control sites where munitions were absent. Tissue analysis results showed that chemical warfare agents and their degradation products were not present within the edible portions of these samples at detectable concentrations, and energetic materials and their degradation products were detected in only a few samples at concentrations below the laboratory reporting limits. Likewise, arsenic, copper, and lead concentrations were below the United States Food and Drug Administration's permitted concentrations of metals in marine biota tissue (if defined), and their presence within these samples could not be attributed to the presence of DMM within the study area based on a comparative analysis of munitions-adjacent and control samples collected. Based on this current dataset, it can be concluded that DMM existing within the HUMMA study area is not contributing to the bioaccumulation of munitions-related chemicals for the biota species investigated to date.

How Can Innovative Learning Environments Promote the Diffusion of Innovation?

ERIC Educational Resources Information Center

Osborne, Mark

2016-01-01

Schools implementing innovative learning environments (ILEs) face many challenges, including the need to discard previously cherished practices and behaviours, adjust mindsets, and invent successful new ways of operating. Leaders can support these processes by implementing structures that: i) support ongoing, distributed, participatory innovation;…

Physical, chemical and antimicrobial characterization of copper-bearing material

NASA Astrophysics Data System (ADS)

Li, Bowen; Hwang, Jiann-Yang; Drelich, Jaroslaw; Popko, Domenic; Bagley, Susan

2010-12-01

Arsenic, cadmium, copper, mercury, silver, and zinc are elements with strong antimicrobial properties. Among them, copper is more environmentally friendly and has both good antibacterial and antifungal properties. It has been shown that copper can even be effective against new viruses such as avian influenza (H5N1). Development of copper-bearing materials for various applications, therefore, is receiving increased attention. The Keweenaw Peninsula of Michigan was the largest native copper mining regions of North America at the turn of the 20th century. Copper was extracted by mining the copper-rich basaltic rock, and steamdriven stamp mills were used to process a great volume of low-grade ores, resulting in huge amounts of crushed waste ore called stamp sands. Approximately 500 million tons of stamp sand were discarded. This material is investigated in this study as an example for the development of antimicrobial materials.

Strategies for obtaining obsidian in pre-European contact era New Zealand.

PubMed

McCoy, Mark D; Carpenter, Jonathan

2014-01-01

Archaeological evidence of people's choices regarding how they supply themselves with obsidian through direct access and different types of exchanges gives us insight in to mobility, social networks, and property rights in the distant past. Here we use collections of obsidian artefacts that date to a period of endemic warfare among Maori during New Zealand's Late Period (1500-1769 A.D.) to determine what strategies people engaged in to obtain obsidian, namely (1) collecting raw material directly from a natural source, (2) informal trade and exchange, and (3) formal trade and exchange. These deposits represent a good cross-section of Late Period archaeology, including primary working of raw material at a natural source (Helena Bay), undefended sites where people discarded rubbish and worked obsidian (Bream Head), and a heavily fortified site (Mt. Wellington). We find that most of the obsidian described here was likely obtained directly from natural sources, especially those located on off-shore islands within about 60-70 km of sites. A smaller amount comes from blocks of material transported from an off-shore island a greater distance away, called Mayor Island, in a formal trade and exchange network. This study demonstrates the value of conducting tandem lithic technology and geochemical sourcing studies to understand how people create and maintain social networks during periods of warfare.

Comparison of defects in ProTaper hand-operated and engine-driven instruments after clinical use.

PubMed

Cheung, G S P; Bian, Z; Shen, Y; Peng, B; Darvell, B W

2007-03-01

To compare the type of defects and mode of material failure of engine-driven and hand-operated ProTaper instruments after clinical use. A total of 401 hand-operated and 325 engine-driven ProTaper instruments were discarded from an endodontic clinic over 17 months. Those that had fractured were examined for plastic deformation in lateral view and remounted for fractographical examination in scanning electron microscope. The mode of fracture was classified as 'fatigue' or 'shear' failure. The lengths of fractured segments in both instruments were recorded. Any distortion in hand instrument was noted. Data were analysed using chi-square, Fisher's exact or Student's t-test, where appropriate. Approximately 14% of all discarded hand-operated instruments and 14% of engine-driven instruments were fractured. About 62% of hand instruments failed because of shear fracture, compared with approximately 66% of engine-driven instruments as a result of fatigue (P < 0.05). Approximately 16% of hand instruments were affected by shear, and either remained intact or was fractured, compared with 5% of engine-driven instruments (P < 0.05). The length of the broken fragment was significantly shorter in hand versus engine-driven group (P < 0.05). Approximately 7% of hand instruments were discarded intact but distorted (rarely for engine-driven instruments); all were in the form of unscrewing of the flutes. The location of defects in hand Finishing instruments was significantly closer to the tip than that for Shaping instruments (P < 0.05). Under the conditions of this study (possibly high usage), the failure mode of ProTaper engine-driven and hand-operated instruments appeared to be different, with shear failure being more prevalent in the latter.

The implant infection paradox: why do some succeed when others fail? Opinion and discussion paper.

PubMed

Yue, C; Zhao, B; Ren, Y; Kuijer, R; van der Mei, H C; Busscher, H J; Rochford, E T J

2015-06-05

Biomaterial-implants are frequently used to restore function and form of human anatomy. However, the presence of implanted biomaterials dramatically elevates infection risk. Paradoxically, dental-implants placed in a bacteria-laden milieu experience moderate failure-rates, due to infection (0.0-1.1%), similar to the ones of joint-arthroplasties placed in a near-sterile environment (0.1-1.3%). Transcutaneous bone-fixation pins breach the immune-barrier of the epidermis, exposing underlying sterile-tissue to an unsterile external environment. In contrast to dental-implants, also placed in a highly unsterile environment, these pins give rise to relatively high infection-associated failure-rates of up to 23.0%. Herein, we attempt to identify causes as to why dental-implants so often succeed, where others fail. The major part of all implants considered are metal-made, with similar surface-finishes. Material choice was therefore discarded as underlying the paradox. Antimicrobial activity of saliva has also been suggested as a cause for the success of dental-implants, but was discarded because saliva is the implant-site-fluid from which viable bacteria adhere. Crevicular fluid was discarded as it is largely analogous to serum. Instead, we attribute the relative success of dental-implants to (1) ability of oral tissues to heal rapidly in the continuous presence of commensal bacteria and opportunistic pathogens, and (2) tolerance of the oral immune-system. Inability of local tissue to adhere, spread and grow in presence of bacteria and an intolerant immune-system are identified as the likely main causes explaining the susceptibility of other implants to infection-associated failure. In conclusion, it is the authors' belief that new anti-infection strategies for a wide range of biomaterial-implants may be derived from the relative success of dental-implants.

Screening for intermediate and severe forms of thalassaemia in discarded red blood cells: optimization and feasibility.

PubMed

George, Elizabeth; Lai, Mei I; Teh, Lai Kuan; Ramasamy, Rajesh; Goh, Ern Huei; Asokan, Kamalan; Tan, J A M A; Vasudevan, Maithili; Low, Sharon

2011-12-01

Detection and quantification of Hb subtypes of human blood is integral to presumptive identification of thalassaemias. It has been used in neonatal screening of thalassaemia and Hb variants. The use of discarded red blood cells following processing of the cord blood for stem cells provides readily available diagnostic material for thalassaemia screening. In this study, we determined the range of Hb subtypes in 195 consecutive cord blood samples collected for cord blood banking. The 'cord blood samples' analysed were those of the remaining red blood cells after the cord blood was processed for stem cell storage. Quantification of Hb subtypes by high performance liquid chromatography (HPLC) was done on BioRad Variant II Hb testing system. Only 73 (36.5%) of the samples could be analyzed neat without dilution. With a 1:300 dilution with wash solution the acceptable area as recommended by the manufacturer for reading of a C-gram within the 1 to 3 million ranges were achieved in all. Eighteen (9%) 12 showed classical Hb Barts (y4) prerun peaks were confirmed by Sebia Hydrasys automated Hb gel electrophoresis and quantified by Sebia Capillarys 2 capillary electrophoresis. Only 1 (0.5%) was presumptively identified with HbH disease. Due to the limited number of samples no beta-thalassaemia major, Hb E beta-thalassaemia and Hb Barts hydrops fetalis were found. The HPLC assay was possible at a cost US$ 5 per sample and a turnover time of 10 samples per hour without technical difficulties. This study reports an effective and valuable protocol for thalassaemia screening in red blood cells which would otherwise be discarded during cord blood processing. Cord blood with severe and intermediate forms of thalassaemia can be preselected and not stored.

A revisionist history of adult marrow stem cell biology or 'they forgot about the discard'.

PubMed

Quesenberry, P; Goldberg, L

2017-08-01

The adult marrow hematopoietic stem cell biology has largely been based on studies of highly purified stem cells. This is unfortunate because during the stem cell purification the great bulk of stem cells are discarded. These cells are actively proliferating. The final purified stem cell is dormant and not representative of the whole stem cell compartment. Thus, a large number of studies on the cellular characteristics, regulators and molecular details of stem cells have been carried on out of non-represented cells. Niche studies have largely pursued using these purified stem cells and these are largely un-interpretable. Other considerations include the distinction between baseline and transplant stem cells and the modulation of stem cell phenotype by extracellular vesicles, to cite a non-inclusive list. Work needs to proceed on characterizing the true stem cell population.

Plastics recycling: challenges and opportunities.

PubMed

Hopewell, Jefferson; Dvorak, Robert; Kosior, Edward

2009-07-27

Plastics are inexpensive, lightweight and durable materials, which can readily be moulded into a variety of products that find use in a wide range of applications. As a consequence, the production of plastics has increased markedly over the last 60 years. However, current levels of their usage and disposal generate several environmental problems. Around 4 per cent of world oil and gas production, a non-renewable resource, is used as feedstock for plastics and a further 3-4% is expended to provide energy for their manufacture. A major portion of plastic produced each year is used to make disposable items of packaging or other short-lived products that are discarded within a year of manufacture. These two observations alone indicate that our current use of plastics is not sustainable. In addition, because of the durability of the polymers involved, substantial quantities of discarded end-of-life plastics are accumulating as debris in landfills and in natural habitats worldwide. Recycling is one of the most important actions currently available to reduce these impacts and represents one of the most dynamic areas in the plastics industry today. Recycling provides opportunities to reduce oil usage, carbon dioxide emissions and the quantities of waste requiring disposal. Here, we briefly set recycling into context against other waste-reduction strategies, namely reduction in material use through downgauging or product reuse, the use of alternative biodegradable materials and energy recovery as fuel. While plastics have been recycled since the 1970s, the quantities that are recycled vary geographically, according to plastic type and application. Recycling of packaging materials has seen rapid expansion over the last decades in a number of countries. Advances in technologies and systems for the collection, sorting and reprocessing of recyclable plastics are creating new opportunities for recycling, and with the combined actions of the public, industry and governments it may be possible to divert the majority of plastic waste from landfills to recycling over the next decades.

Plastics recycling: challenges and opportunities

PubMed Central

Hopewell, Jefferson; Dvorak, Robert; Kosior, Edward

2009-01-01

Plastics are inexpensive, lightweight and durable materials, which can readily be moulded into a variety of products that find use in a wide range of applications. As a consequence, the production of plastics has increased markedly over the last 60 years. However, current levels of their usage and disposal generate several environmental problems. Around 4 per cent of world oil and gas production, a non-renewable resource, is used as feedstock for plastics and a further 3–4% is expended to provide energy for their manufacture. A major portion of plastic produced each year is used to make disposable items of packaging or other short-lived products that are discarded within a year of manufacture. These two observations alone indicate that our current use of plastics is not sustainable. In addition, because of the durability of the polymers involved, substantial quantities of discarded end-of-life plastics are accumulating as debris in landfills and in natural habitats worldwide. Recycling is one of the most important actions currently available to reduce these impacts and represents one of the most dynamic areas in the plastics industry today. Recycling provides opportunities to reduce oil usage, carbon dioxide emissions and the quantities of waste requiring disposal. Here, we briefly set recycling into context against other waste-reduction strategies, namely reduction in material use through downgauging or product reuse, the use of alternative biodegradable materials and energy recovery as fuel. While plastics have been recycled since the 1970s, the quantities that are recycled vary geographically, according to plastic type and application. Recycling of packaging materials has seen rapid expansion over the last decades in a number of countries. Advances in technologies and systems for the collection, sorting and reprocessing of recyclable plastics are creating new opportunities for recycling, and with the combined actions of the public, industry and governments it may be possible to divert the majority of plastic waste from landfills to recycling over the next decades. PMID:19528059

76 FR 14884 - Atlantic Highly Migratory Species; Modification of the Retention of Incidentally-Caught Highly...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-18

... smoothhound shark complex (which includes smooth dogfish and Florida smoothhound (genus Mustelus) in all... address regulatory discards of incidentally-caught species in the smoothhound shark complex by establishing a retention limit for smoothhound sharks in all Atlantic trawl fisheries. The proposed actions are...

Paternity testing.

PubMed

Onoja, A M

2011-01-01

Molecular diagnostic techniques have found application in virtually all areas of medicine, including criminal investigations and forensic analysis. The techniques have become so precise that it is now possible to conclusively determine paternity using DNA from grand parents, cousins, or even saliva left on a discarded cigarette butt. This is a broad overview of paternity testing.

Reuse of ornamental rock-cutting waste in aluminous porcelain.

PubMed

Silva, M A; Paes, H R; Holanda, J N F

2011-03-01

Large amounts of solid wastes are discarded in the ornamental rocks industry. This work investigates the incorporation of ornamental rock-cutting waste as a raw material into an aluminous porcelain body, replacing natural feldspar material by up to 35 wt.%. Formulations containing rock-cutting waste were pressed and sintered at 1350 °C. The porcelain pieces were tested to determine their properties (linear shrinkage, water absorption, apparent density, mechanical strength, and electrical resistivity). Development of the microstructure was followed by scanning electron microscopy (SEM) and X-ray diffraction (XRD) analyses. The results showed that ornamental rock-cutting waste could be used in aluminous porcelains, in the range up to 10 wt.%, as a partial replacement for traditional flux material, resulting in a valid route for management of this abundant waste. Copyright © 2010 Elsevier Ltd. All rights reserved.

Internationalization or globalization of higher education

PubMed Central

Rezaei, Habibolah; Yousefi, Alireza; Larijani, Bagher; Dehnavieh, Reza; Rezaei, Nima; Adibi, Peyman

2018-01-01

INTRODUCTION: Studies about globalization and internationalization demonstrate different attitudes in explaining these concepts. Since there is no consensus among Iranian specialists about these concepts, the purpose of this study is to explain the concepts of internationalization and globalization in Iran. MATERIALS AND METHODS: This study is a systematic review done in the first half of 2016. To explain the concept of globalization and internationalization, articles in Scientific Information D atabase, Magiran database, and Google Scholar were searched with the keywords such as globalization, scientific exchange, international cooperation, curriculum exchange, student exchange, faculty exchange, multinational cooperation, transnational cooperation, and collaborative research. Articles, used in this study, were in Persian and were devoted to internationalization and globalization between 2001 and 2016. The criterion of discarding the articles was duplicity. RESULTS: As many as 180 Persian articles were found on this topic. After discarding repetitive articles, 64 remained. Among those, 39 articles mentioned the differences between globalization and internationalization. Definitions of globalization were categorized in four categories, including globalization, globalizing, globalization of higher education, and globalizing of higher education. Definitions about internationalization were categorized in five categories such as internationalization, internationalization of higher education, internationalization of the curriculum, internationalization of curriculum studies, and internationalization of curriculum profession. CONCLUSION: The spectrum of the globalization of higher education moves from dissonance and multipolarization to unification and single polarization of the world. One end of the spectrum, which is unification and single polarization of the world, is interpreted as globalization. The other side of the spectrum, which is dissonance and multipolarization, is interpreted as globalizing. The definition of internalization is the same as that of globalizing. In other words, it is possible to say that internalization is similar to globalizing but different from globalization. PMID:29417068

Blood culture accuracy: discards from central venous catheters in pediatric oncology patients in the emergency department.

PubMed

Winokur, Elizabeth J; Pai, Debra; Rutledge, Dana N; Vogel, Kate; Al-Majid, Sadeeka; Marshall, Christine; Sheikewitz, Paul

2014-07-01

Lack of specific guidelines regarding collection of blood for culture from central venous catheters (CVCs) has led to inconsistencies in policies among hospitals. Currently, no specific professional or regulatory recommendations exist in relation to using, reinfusing, or discarding blood drawn from CVCs before drawing blood for a culture. Repeated wasting of blood may harm immunocompromised pediatric oncology patients. The purpose of this comparative study was to determine whether differences exist between blood cultures obtained from the first 5 mL of blood drawn from a CVC line when compared with the second 5 mL drawn. During 2009-2011, 62 pediatric oncology patients with CVCs and orders for blood cultures to determine potential sepsis were enrolled during ED visits. Trained study nurses aseptically drew blood and injected the normally discarded first 5 mL and the second specimen (usual care) into separate culture bottles. Specimens were processed in the microbiology laboratory per hospital policy. Positive cultures were evaluated to assess agreement between specimen results and to determine that the identified pathogen was not a contaminant. Out of 186 blood culture pairs, 4.8% demonstrated positive results. In all positive-positive matches, the normal discard specimen contained the same organism as the usual care specimen. In 4 matches, the normally discarded specimen demonstrated notably earlier time to positivity (4 to 31 hours) compared with the usual care specimen, which resulted in earlier initiation of definitive antibiotics. These findings support the accuracy of the specimen that is normally discarded and suggest the need to reconsider its use for blood culture testing. Copyright © 2014 Emergency Nurses Association. Published by Mosby, Inc. All rights reserved.

SEARCHBreast: a new resource to locate and share surplus archival material from breast cancer animal models to help address the 3Rs.

PubMed

Blyth, Karen; Carter, Phil; Morrissey, Bethny; Chelala, Claude; Jones, Louise; Holen, Ingunn; Speirs, Valerie

2016-04-01

Animal models have contributed to our understanding of breast cancer, with publication of results in high-impact journals almost invariably requiring extensive in vivo experimentation. As such, many laboratories hold large collections of surplus animal material, with only a fraction being used in publications relating to the original projects. Despite being developed at considerable cost, this material is an invisible and hence an underutilised resource, which often ends up being discarded. Within the breast cancer research community there is both a need and desire to make this valuable material available for researchers. Lack of a coordinated system for visualisation and localisation of this has prevented progress. To fulfil this unmet need, we have developed a novel initiative called Sharing Experimental Animal Resources: Coordinating Holdings-Breast (SEARCHBreast) which facilitates sharing of archival tissue between researchers on a collaborative basis and, de facto will reduce overall usage of animal models in breast cancer research. A secure searchable database has been developed where researchers can find, share, or upload materials related to animal models of breast cancer, including genetic and transplant models. SEARCHBreast is a virtual compendium where the physical material remains with the original laboratory. A bioanalysis pipeline is being developed for the analysis of transcriptomics data associated with mouse models, allowing comparative study with human and cell line data. Additionally, SEARCHBreast is committed to promoting the use of humanised breast tissue models as replacement alternatives to animals. Access to this unique resource is freely available to all academic researchers following registration at https://searchbreast.org.

H2O SOS; Help heal the Ocean

NASA Astrophysics Data System (ADS)

Weiss, C.

2017-12-01

Marine Debris is defined by NOAA (National Oceanic and Atmospheric Administration) as any man made object discarded, disposed of or abandoned that enters the coastal or marine environment. All marine debris can be traced back to one source: PEOPLE. The mishandling of waste materials and other items makes up the bulk of the marine debris problem. -Debris can smother sensitive ecosystems. -Pollution and clogging of watersheds -Medical and personal hygiene products can effect beach goers -Grocery bags, trash bags, fishing line can wrap around propellers and cause damage

Commercially laid eggs vs. discarded hatching eggs: contamination by Salmonella spp.

PubMed

Kottwitz, Luciana B M; Leão, Joice Aparecida; Back, Alberto; Rodrigues, Dalia dos P; Magnani, Marciane; de Oliveira, Tereza C R M

2013-01-01

Salmonella enterica is frequently associated with outbreaks of human salmonellosis, and products of avian origin, such as eggs and chicken meat, are the main vehicles of its transmission. The present study describes the occurrence of different serovars of Salmonella enterica and phagotypes of S. enterica serovar Enteritidis in eggs destined for human consumption. Four thousand eggs obtained from commercial egg laying farms and one thousand discarded hatching eggs from broiler farms, which were acquired at farmers' markets and informal shops, were analyzed. Salmonella spp. was isolated from 52.0% of the discarded hatching eggs, in which the predominant serovar was Enteritidis (84.6%), and the predominant Salmonella Enteritidis phagotype (PT) was PT7 (26.9%). Salmonella spp. was not isolated from eggs obtained from commercial egg laying farms. The antimicrobial resistance profile showed that 23.1% (n = 6) of the SE strains were resistant to nalidixic acid. The results suggest that the consumption of discarded hatching eggs represents an important source of Salmonella transmission to humans.

An artificial vision solution for reusing discarded parts resulted after a manufacturing process

NASA Astrophysics Data System (ADS)

Cohal, V.; Cohal, A.

2016-08-01

The profit of a factory can be improved by reusing the discarded components produced. This paper is based on the case of a manufacturing process where rectangular metallic sheets of different sizes are produced. Using an artificial vision system, the shapes and the sizes of the produced parts can be determined. Those sheets which do not respect the requirements imposed are labeled as discarded. Instead of throwing these parts, a decision algorithm can analyze if another metallic sheet with smaller dimensions can be obtained from these. Two methods of decision are presented in this paper, considering the restriction that the sides of the new sheet has to be parallel with the axis of the coordinate system. The coordinates of each new part obtained from a discarded sheet are computed in order to be delivered to a milling machine. Details about implementing these algorithms (image processing and decision respectively) in the MATLAB environment using Image Processing Toolbox are given.

Two-step bioleaching of copper and gold from discarded printed circuit boards (PCB).

PubMed

Işıldar, Arda; van de Vossenberg, Jack; Rene, Eldon R; van Hullebusch, Eric D; Lens, Piet N L

2016-11-01

An effective strategy for environmentally sound biological recovery of copper and gold from discarded printed circuit boards (PCB) in a two-step bioleaching process was experimented. In the first step, chemolithotrophic acidophilic Acidithiobacillus ferrivorans and Acidithiobacillus thiooxidans were used. In the second step, cyanide-producing heterotrophic Pseudomonas fluorescens and Pseudomonas putida were used. Results showed that at a 1% pulp density (10g/L PCB concentration), 98.4% of the copper was bioleached by a mixture of A. ferrivorans and A. thiooxidans at pH 1.0-1.6 and ambient temperature (23±2°C) in 7days. A pure culture of P. putida (strain WCS361) produced 21.5 (±1.5)mg/L cyanide with 10g/L glycine as the substrate. This gold complexing agent was used in the subsequent bioleaching step using the Cu-leached (by A. ferrivorans and A. thiooxidans) PCB material, 44.0% of the gold was mobilized in alkaline conditions at pH 7.3-8.6, and 30°C in 2days. This study provided a proof-of-concept of a two-step approach in metal bioleaching from PCB, by bacterially produced lixiviants. Copyright © 2015 Elsevier Ltd. All rights reserved.

Who owns the recyclables

DOE Office of Scientific and Technical Information (OSTI.GOV)

Parker, B.

On March 31, the California Supreme Court decided the much awaited Rancho Mirage'' case (Waste Management of the Desert, Inc., and the City of Rancho Mirage v. Palm Springs Recycling Center, Inc.), and held that the California Integrated Waste Management Act of 1989 does not allow an exclusive franchise for the collection of recyclables not discarded by their owner.'' This ends a three-year slugfest between secondary materials processors in the state and municipalities and their franchised garbage haulers who also collect and process recyclables as part of their exclusive arrangement. Central to this nationally-watched litigation is a most fundamental questionmore » in waste management: at what point in time do articles in the solid waste stream become actual or potentially valuable secondary materials« less

Preparation of flexible bone tissue scaffold utilizing sea urchin test and collagen.

PubMed

Manchinasetty, Naga Vijaya Lakshmi; Oshima, Sho; Kikuchi, Masanori

2017-10-13

Gonads of sea urchin are consumed in Japan and some countries as food and most parts including its tests are discarded as marine wastes. Therefore, utilization of them as functional materials would reduce the waste as well as encourage Japanese fishery. In this study, magnesium containing calcite granules collected from sea urchin tests were hydrothermally phosphatized and the obtained granules were identified as approximately 82% in mass of magnesium containing β-tricalcium phosphate and 18% in mass of nonstoichiometric hydroxyapatite, i.e., a biphasic calcium phosphate, maintaining the original porous network. Shape-controlled scaffolds were fabricated with the obtained biphasic calcium phosphate granules and collagen. The scaffolds showed good open porosity (83.84%) and adequate mechanical properties for handling during cell culture and subsequent operations. The MG-63 cells showed higher proliferation and osteogenic differentiation in comparison to a control material, the collagen sponge with the same size. Furthermore, cell viability assay proved that the scaffolds were not cytotoxic. These results suggest that scaffold prepared using sea urchin test derived calcium phosphate and collagen could be a potential candidate of bone void fillers for non-load bearing defects in bone reconstruction as well as scaffolds for bone tissue engineering.

50 CFR 648.143 - Minimum sizes.

Code of Federal Regulations, 2011 CFR

2011-10-01

... black sea bass fishery adopted by the ASMFC. (1) Commercial ACL overage evaluation. The commercial sector ACL will be evaluated based on a single-year examination of total catch (landings and dead discards). Both landings and dead discards will be evaluated in determining if the commercial sector ACL...

Negation in Context: A Functional Approach to Suppression

ERIC Educational Resources Information Center

Giora, Rachel; Fein, Ofer; Aschkenazi, Keren; Alkabets-Zlozover, Inbar

2007-01-01

Three experiments show that, contrary to the current view, comprehenders do not unconditionally deactivate information marked by negation. Instead, they discard negated information when it is functionally motivated. In Experiment 1, comprehenders discarded negated concepts when cued by a topic shift to dampen recently processed information.…

Safety Isn't Always First: A Disturbing Look at Chemistry Books.

ERIC Educational Resources Information Center

Manning, Pat; Newman, Alan R.

1986-01-01

Discusses the problem of serious dangers in current and backlist chemistry experiment books. Discarding of older books and careful evaluation of the dangers inherent in newer books are recommended. Safe alternatives are suggested, including some criteria for evaluating dangers, and a safer approach used by a current author. (EM)

Designing Differentiated Mathematics Games: "Discarding" the One-Size-Fits-All Approach to Educational Game Play

ERIC Educational Resources Information Center

Trinter, Christine P.; Brighton, Catherine M.; Moon, Tonya R.

2015-01-01

Primary grade students enter the mathematics classroom with a range of differences including students' mathematical readiness, mathematical conceptions, interests, and learning profiles. Addressing the learning needs of students is not a trivial task, but accounting for these needs is essential for supporting students as they continually work…

29 CFR 1919.71 - Unit proof test and examination of cranes.

Code of Federal Regulations, 2014 CFR

2014-07-01

..., including wire rope and wire rope terminals and connections, shall be checked with particular attention to sections of wire rope exposed to abnormal wear and to sections not normally exposed for examination. The provisions of § 1919.24 shall apply in wire rope examinations. Cracked or deformed hooks shall be discarded...

29 CFR 1919.71 - Unit proof test and examination of cranes.

Code of Federal Regulations, 2012 CFR

2012-07-01

..., including wire rope and wire rope terminals and connections, shall be checked with particular attention to sections of wire rope exposed to abnormal wear and to sections not normally exposed for examination. The provisions of § 1919.24 shall apply in wire rope examinations. Cracked or deformed hooks shall be discarded...

29 CFR 1919.71 - Unit proof test and examination of cranes.

Code of Federal Regulations, 2013 CFR

2013-07-01

..., including wire rope and wire rope terminals and connections, shall be checked with particular attention to sections of wire rope exposed to abnormal wear and to sections not normally exposed for examination. The provisions of § 1919.24 shall apply in wire rope examinations. Cracked or deformed hooks shall be discarded...

50 CFR 648.233 - Spiny dogfish Accountability Measures (AMs).

Code of Federal Regulations, 2014 CFR

2014-10-01

... dogfish permit under this part. (b) ACL overage evaluation. The ACL will be evaluated based on a single-year examination of total catch (including both landings and dead discards) to determine if the ACL has been exceeded. (c) Overage repayment. In the event that the ACL has been exceeded in a given fishing...

Caution needed in using oral polio vaccine beyond the cold chain: vaccine vial monitors may be unreliable at high temperatures.

PubMed

Shrivastava, Ashutosh; Gupta, Neeraj; Upadhyay, Pramod; Puliyel, Jacob

2012-04-01

Stabilized live attenuated oral polio vaccine (OPV) is used to immunize children up to the age of five years to prevent poliomyelitis. It is strongly advised that the cold-chain should be maintained until the vaccine is administered. It is assumed, that vaccine vial monitors (VVMs) are reliable at all temperatures. VVMs are tested at 37°C and it is assumed that the labels reach discard point before vaccine potency drops to >0.6 log10. This study was undertaken to see if VVMs were reliable when exposed to high temperatures as can occur in field conditions in India. Vaccine vials with VVMs were incubated (10 vials for each temperature) in an incubator at different temperatures at 37, 41, 45 and 49.5°C. Time-lapse photographs of the VVMs on vials were taken hourly to look for their discard-point. At 37 and 41°C the VVMs worked well. At 45°C, vaccine potency is known to drop to the discard level within 14 h whereas the VVM discard point was reached at 16 h. At 49.5°C the VVMs reached discard point at 9 h when these should have reached it at 3 h. Absolute reliance cannot be placed on VVM in situation where environmental temperatures are high. Caution is needed when using 'outside the cold chain' (OCC) protocols.

Health status of birds fed diets containing three differently processed discarded vegetable-bovine blood-rumen content mixtures.

PubMed

Ekunseitan, D A; Balogun, O O; Sogunle, O M; Yusuf, A O; Ayoola, A A; Egbeyale, L T; Adeyemi, O A; Allison, I B; Iyanda, A I

2013-04-01

This study was conducted to determine the effect of feeding three differently processed mixtures on health status of broilers. A total of 1080 day-old Marshal broilers were fed; discarded vegetable-fresh bovine blood-fresh rumen digesta (P1), discarded vegetable-ensiled bovine blood-fresh rumen digesta (P2) and discarded vegetable-fresh bovine blood-ensiled rumen digesta (P3) at three levels of inclusion (0, 3 and 6%). Data on blood parameters was taken and were subjected to 3 x 3 factorial arrangements in a completely randomized design. Birds fed P1 had least values (p < 0.05) of serum glucose, total protein, globulin, uric acid and creatinine at starter phase. Birds fed diets containing 3 and 6% level of inclusion recorded the highest (p < 0.05) Packed cell volume, Haemoglobin, White blood cell and Red blood cell values. However, those fed at 0% level of inclusion recorded the highest albumin value. At finisher phase, birds fed P2 and P3 had the highest glucose, uric acid and creatinine values. 6% level of inclusion significantly (p < 0.05) increased the total protein and albumin values. Therefore, for enhanced performance and without comprising the health condition of birds; broiler chickens could be fed diets containing discarded vegetable-fresh bovine blood-ensiled rumen digesta (P3) up to 6% level of inclusion.

Spliceosome Profiling Visualizes Operations of a Dynamic RNP at Nucleotide Resolution.

PubMed

Burke, Jordan E; Longhurst, Adam D; Merkurjev, Daria; Sales-Lee, Jade; Rao, Beiduo; Moresco, James J; Yates, John R; Li, Jingyi Jessica; Madhani, Hiten D

2018-05-03

Tools to understand how the spliceosome functions in vivo have lagged behind advances in the structural biology of the spliceosome. Here, methods are described to globally profile spliceosome-bound pre-mRNA, intermediates, and spliced mRNA at nucleotide resolution. These tools are applied to three yeast species that span 600 million years of evolution. The sensitivity of the approach enables the detection of canonical and non-canonical events, including interrupted, recursive, and nested splicing. This application of statistical modeling uncovers independent roles for the size and position of the intron and the number of introns per transcript in substrate progression through the two catalytic stages. These include species-specific inputs suggestive of spliceosome-transcriptome coevolution. Further investigations reveal the ATP-dependent discard of numerous endogenous substrates after spliceosome assembly in vivo and connect this discard to intron retention, a form of splicing regulation. Spliceosome profiling is a quantitative, generalizable global technology used to investigate an RNP central to eukaryotic gene expression. Copyright © 2018 Elsevier Inc. All rights reserved.

Should extended blastocyst culture include Day 7?

PubMed

Hammond, Elizabeth R; Cree, Lynsey M; Morbeck, Dean E

2018-06-01

Extended culture to the blastocyst stage is widely practised, improving embryo selection and promoting single embryo transfer. Selection of useable blastocysts typically occurs on Days 5 and 6 of embryo culture. Embryos not suitable for transfer, biopsy or cryopreservation after Day 6 are routinely discarded. Some embryos develop at a slower rate, however, forming blastocysts on Day 7 of culture. Day 7 blastocysts can be viable, they can be of top morphological grade, euploid and result in a healthy live birth. Since ending culture on Day 6 is current practice in most clinics, viable Day 7 blastocysts may be prematurely discarded. Although Day 7 blastocysts make up only 5% of useable blastocysts, those which are suitable for cryopreservation or biopsy are clinically significant. Overall, culturing embryos an additional day increases the number of useable embryos per IVF cycle and provides further opportunity for pregnancy for patients, especially those who have only a few or low-quality blastocysts.

50 CFR 648.123 - Gear restrictions.

Code of Federal Regulations, 2011 CFR

2011-10-01

... available for landing scup for the remainder of the period. (1) Commercial ACL overage evaluation. The commercial sector ACL will be evaluated based on a single-year examination of total catch (landings and dead discards). Both landings and dead discards will be evaluated in determining if the commercial sector ACL...

End-of-life flows of multiple cycle consumer products.

PubMed

Tsiliyannis, C A

2011-11-01

Explicit expressions for the end-of-life flows (EOL) of single and multiple cycle products (MCPs) are presented, including deterministic and stochastic EOL exit. The expressions are given in terms of the physical parameters (maximum lifetime, T, annual cycling frequency, f, number of cycles, N, and early discard or usage loss). EOL flows are also obtained for hi-tech products, which are rapidly renewed and thus may not attain steady state (e.g., electronic products, passenger cars). A ten-step recursive procedure for obtaining the dynamic EOL flow evolution is proposed. Applications of the EOL expressions and the ten-step procedure are given for electric household appliances, industrial machinery, tyres, vehicles and buildings, both for deterministic and stochastic EOL exit, (normal, Weibull and uniform exit distributions). The effect of the physical parameters and the stochastic characteristics on the EOL flow is investigated in the examples: it is shown that the EOL flow profile is determined primarily by the early discard dynamics; it also depends strongly on longevity and cycling frequency: higher lifetime or early discard/loss imply lower dynamic and steady state EOL flows. The stochastic exit shapes the overall EOL dynamic profile: Under symmetric EOL exit distribution, as the variance of the distribution increases (uniform to normal to deterministic) the initial EOL flow rise becomes steeper but the steady state or maximum EOL flow level is lower. The steepest EOL flow profile, featuring the highest steady state or maximum level, as well, corresponds to skew, earlier shifted EOL exit (e.g., Weibull). Since the EOL flow of returned products consists the sink of the reuse/remanufacturing cycle (sink to recycle) the results may be used in closed loop product lifecycle management operations for scheduling and sizing reverse manufacturing and for planning recycle logistics. Decoupling and quantification of both the full age EOL and of the early discard flows is useful, the latter being the target of enacted legislation aiming at increasing reuse. Copyright © 2011 Elsevier Ltd. All rights reserved.

Designing Visceral, Behavioural and Reflective Products

NASA Astrophysics Data System (ADS)

Aftab, Mersha; Rusli, Helen Agustin

2017-09-01

Designers and manufacturers often see consumption as the primary objective of a product - with implications such as discarded products, obsolete wastes, and ecological degradation. The paper aims to find the answer to the question, how emotional design can adapt the discarded and undesirable products into something valuable in a long term? This paper presents a framework combining Chapman's theory and Norman's theory on three levels of emotional design to highlight what long lasting connection with products entails. A design approach is presented combing the Wabi Sabi philosophy that promotes the celebration of decay and damage. This is used as one of the design principles for the experiments conducted on discarded products. Through constant user interaction before, during and after the experiments the evaluation of design as an agent of transformation is done. The user conducted the evaluation based on the Kansei elements of looks, sound, smell, and feel of the product. The experiments confirmed that a long-term value is only achieved through redesigning and reconstructing the perception of people towards products on a reflective level, rather than the visceral and behavioural elements of the product. The research found attachment to the visceral and behavioural elements of a product instead of an emotional one was causing users to discard products faster than required. The research indicated that many people, including designers and manufacturers, are unconsciously focusing on usability (behavioural level) and physical look (visceral level) of a product that are easily replaced, than on a meaningful way (reflective level) to create and maintain long-lasting emotions. The research concluded with a proposition towards digitization of products which could perhaps be an all round solution to make products more appropriate to human emotions. Digitization could give products the ability to capture, store and then communicate the stories, journey and memories back, in order to empower people to understand the value of longer-term use of products.

Analysis of College Students’ Personal Health Information Activities: Online Survey

PubMed Central

Sinn, Donghee; Syn, Sue Yeon

2018-01-01

Background With abundant personal health information at hand, individuals are faced with a critical challenge in evaluating the informational value of health care records to keep useful information and discard that which is determined useless. Young, healthy college students who were previously dependents of adult parents or caregivers are less likely to be concerned with disease management. Personal health information management (PHIM) is a special case of personal information management (PIM) that is associated with multiple interactions among varying stakeholders and systems. However, there has been limited evidence to understand informational or behavioral underpinning of the college students’ PHIM activities, which can influence their health in general throughout their lifetime. Objective This study aimed to investigate demographic and academic profiles of college students with relevance to PHIM activities. Next, we sought to construct major PHIM-related activity components and perceptions among college students. Finally, we sought to discover major factors predicting core PHIM activities among college students we sampled. Methods A Web survey was administered to collect responses about PHIM behaviors and perceptions among college students from the University of Kentucky from January through March 2017. A total of 1408 college students were included in the analysis. PHIM perceptions, demographics, and academic variations were used as independent variables to predict diverse PHIM activities using a principal component analysis (PCA) and hierarchical regression analyses (SPSS v.24, IBM Corp, Armonk, NY, USA). Results Majority of the participants were female (956/1408, 67.90%), and the age distribution of this population included an adequate representation of college students of all ages. The most preferred health information resources were family (612/1408, 43.47%), health care professionals (366/1408, 26.00%), friends (27/1408, 1.91%), and the internet (157/1408, 11.15%). Organizational or curatorial activities such as Arranging, Labeling, Categorizing, and Discarding were rated low (average=3.21, average=3.02, average=2.52, and average=2.42, respectively). The PCA results suggested 3 components from perception factors labeled as follows: Assistance (alpha=.85), Awareness (alpha=.716), and Difficulty (alpha=.558). Overall, the Demographics and Academics variables were not significant in predicting dependent variables such as Labeling, Categorizing, Health Education Materials, and Discarding, whereas they were significant for other outcome variables such as Sharing, Collecting, Knowing, Insurance Information, Using, and Owning. Conclusions College years are a significant time for students to learn decision-making skills for maintaining information, a key aspect of health records, as well as for educators to provide appropriate educational and decision aids in the environment of learning as independent adults. Our study will contribute to better understand knowledge about specific skills and perceptions for college students’ practice of effective PHIM throughout their lives. PMID:29678798

Risk practices for animal and human anthrax in Bangladesh: an exploratory study

PubMed Central

Islam, Md. Saiful; Hossain, M. Jahangir; Mikolon, Andrea; Parveen, Shahana; Khan, M. Salah Uddin; Haider, Najmul; Chakraborty, Apurba; Titu, Abu Mohammad Naser; Rahman, M. Waliur; Sazzad, Hossain M. S.; Rahman, Mahmudur; Gurley, Emily S.; Luby, Stephen P.

2013-01-01

Introduction From August 2009 to October 2010, International Centre for Diarrheal Disease Research, Bangladesh and the Institute of Epidemiology, Disease Control and Research together investigated 14 outbreaks of anthrax which included 140 animal and 273 human cases in 14 anthrax-affected villages. Our investigation objectives were to explore the context in which these outbreaks occurred, including livestock rearing practices, human handling of sick and dead animals, and the anthrax vaccination program. Methods Field anthropologists used qualitative data-collection tools, including 15 hours of unstructured observations, 11 key informant interviews, 32 open-ended interviews, and 6 group discussions in 5 anthrax-affected villages. Results Each cattle owner in the affected communities raised a median of six ruminants on their household premises. The ruminants were often grazed in pastures and fed supplementary rice straw, green grass, water hyacinth, rice husk, wheat bran, and oil cake; lactating cows were given dicalcium phosphate. Cattle represented a major financial investment. Since Islamic law forbids eating animals that die from natural causes, when anthrax-infected cattle were moribund, farmers often slaughtered them on the household premises while they were still alive so that the meat could be eaten. Farmers ate the meat and sold it to neighbors. Skinners removed and sold the hides from discarded carcasses. Farmers discarded the carcasses and slaughtering waste into ditches, bodies of water, or open fields. Cattle in the affected communities did not receive routine anthrax vaccine due to low production, poor distribution, and limited staffing for vaccination. Conclusion Slaughtering anthrax-infected animals and disposing of butchering waste and carcasses in environments where ruminants live and graze, combined with limited vaccination, provided a context that permitted repeated anthrax outbreaks in animals and humans. Because of strong financial incentives, slaughtering moribund animals and discarding carcasses and waste products will likely continue. Long-term vaccination coverage for at-risk animal populations may reduce anthrax infection. PMID:24298326

High-performance green semiconductor devices: materials, designs, and fabrication

NASA Astrophysics Data System (ADS)

Jung, Yei Hwan; Zhang, Huilong; Gong, Shaoqin; Ma, Zhenqiang

2017-06-01

From large industrial computers to non-portable home appliances and finally to light-weight portable gadgets, the rapid evolution of electronics has facilitated our daily pursuits and increased our life comforts. However, these rapid advances have led to a significant decrease in the lifetime of consumer electronics. The serious environmental threat that comes from electronic waste not only involves materials like plastics and heavy metals, but also includes toxic materials like mercury, cadmium, arsenic, and lead, which can leak into the ground and contaminate the water we drink, the food we eat, and the animals that live around us. Furthermore, most electronics are comprised of non-renewable, non-biodegradable, and potentially toxic materials. Difficulties in recycling the increasing amount of electronic waste could eventually lead to permanent environmental pollution. As such, discarded electronics that can naturally degrade over time would reduce recycling challenges and minimize their threat to the environment. This review provides a snapshot of the current developments and challenges of green electronics at the semiconductor device level. It looks at the developments that have been made in an effort to help reduce the accumulation of electronic waste by utilizing unconventional, biodegradable materials as components. While many semiconductors are classified as non-biodegradable, a few biodegradable semiconducting materials exist and are used as electrical components. This review begins with a discussion of biodegradable materials for electronics, followed by designs and processes for the manufacturing of green electronics using different techniques and designs. In the later sections of the review, various examples of biodegradable electrical components, such as sensors, circuits, and batteries, that together can form a functional electronic device, are discussed and new applications using green electronics are reviewed.

Options and processes for spent catalyst handling and utilization.

PubMed

Marafi, M; Stanislaus, A

2003-07-18

The quantity of spent hydroprocessing catalysts discarded as solid wastes in the petroleum refining industries has increased remarkably in recent years due to a rapid growth in the hydroprocessing capacity to meet the rising demand for low-sulfur fuels. Due to their toxic nature, spent hydroprocessing catalysts have been branded as hazardous wastes, and the refiners are experiencing pressure from environmental authorities to handle them safely. Several alternative methods such as reclamation of metals, rejuvenation and reuse, disposal in landfills and preparation of useful materials using spent catalysts as raw materials are available to deal with the spent catalyst problem. The technical feasibility as well as the environmental and economic aspects of these options are reviewed. In addition, details of two bench-scale processes, one for rejuvenation of spent hydroprocessing catalysts, and the other for producing non-leachable synthetic aggregate materials that were developed in this laboratory, are presented in this paper.

Towards sustainable design for single-use medical devices.

PubMed

Hanson, Jacob J; Hitchcock, Robert W

2009-01-01

Despite their sophistication and value, single-use medical devices have become commodity items in the developed world. Cheap raw materials along with large scale manufacturing and distribution processes have combined to make many medical devices more expensive to resterilize, package and restock than to simply discard. This practice is not sustainable or scalable on a global basis. As the petrochemicals that provide raw materials become more expensive and the global reach of these devices continues into rapidly developing economies, there is a need for device designs that take into account the total life-cycle of these products, minimize the amount of non-renewable materials consumed and consider alternative hybrid reusable / disposable approaches. In this paper, we describe a methodology to perform life cycle and functional analyses to create additional design requirements for medical devices. These types of sustainable approaches can move the medical device industry even closer to the "triple bottom line"--people, planet, profit.

Fat Layer from Medullary Canal Reamer Aspirate for Potential Use as a Supplemental Osteoinductive Bone Graft Material.

PubMed

Sinclair, Sarina S Kay; Horton, C Olsen; Jeray, Kyle J; Tanner, Stephanie L; Burgl, Karen J L

2015-01-01

Mesenchymal stem cells (MSCs) are of therapeutic interest to clinicians and researchers, as they have been shown to augment the osteogenic properties of bone grafts. MSCs are known to be prevalent in bone marrow, but are still limited in numbers. Hence, additional sources of MSCs are beneficial to increasing grafting potential. Aspirate material collected using the Reamer/Irrigator/Aspirator (RIA) device (Synthes; Paoli, PA) during reaming of the femoral shaft consists of three main components: bone fragments, liquid flow-through, and a fat layer. Currently, only the bone and liquid layers have been examined for osteoinductive elements, and the bone fragments are exclusively used as autologous bone graft. In the present study, a method to promote cellular outgrowth, tapping proliferative capacity from the previously discarded fatty layer of RIA aspirate, is described. Proliferating cells were successfully isolated from the bone and fatty layers of a consenting patient and found to be viable after liquid nitrogen storage. The osteogenic differentiation potential of the cells isolated from the fat and bone layers was assessed. Cells from both layers of the aspirate expressed statistically significant levels (p < 0.05) of the bone cell marker alkaline phosphatase compared to the control cells, suggesting differentiation along the osteoblastic pathway. Results from this pilot study indicate that the traditionally discarded fatty element of RIA aspirate may be a source of MSCs with bone-forming capabilities and the described isolation technique is effective. Combining the aspirate fatty and bony elements may enhance the clinical success of the RIA autograft.

Municipal solid waste landfills harbor distinct microbiomes

USGS Publications Warehouse

Stamps, Blake W.; Lyles, Christopher N.; Suflita, Joseph M.; Masoner, Jason R.; Cozzarelli, Isabelle M.; Kolpin, Dana W.; Stevenson, Bradley S.

2016-01-01

Landfills are the final repository for most of the discarded material from human society and its “built environments.” Microorganisms subsequently degrade this discarded material in the landfill, releasing gases (largely CH4 and CO2) and a complex mixture of soluble chemical compounds in leachate. Characterization of “landfill microbiomes” and their comparison across several landfills should allow the identification of environmental or operational properties that influence the composition of these microbiomes and potentially their biodegradation capabilities. To this end, the composition of landfill microbiomes was characterized as part of an ongoing USGS national survey studying the chemical composition of leachates from 19 non-hazardous landfills across 16 states in the continental U.S. The landfills varied in parameters such as size, waste composition, management strategy, geography, and climate zone. The diversity and composition of bacterial and archaeal populations in leachate samples were characterized by 16S rRNA gene sequence analysis, and compared against a variety of physical and chemical parameters in an attempt to identify their impact on selection. Members of the Epsilonproteobacteria, Gammaproteobacteria, Clostridia, and candidate division OP3 were the most abundant. The distribution of the observed phylogenetic diversity could best be explained by a combination of variables and was correlated most strongly with the concentrations of chloride and barium, rate of evapotranspiration, age of waste, and the number of detected household chemicals. This study illustrates how leachate microbiomes are distinct from those of other natural or built environments, and sheds light on the major selective forces responsible for this microbial diversity.

Municipal Solid Waste Landfills Harbor Distinct Microbiomes

PubMed Central

Stamps, Blake W.; Lyles, Christopher N.; Suflita, Joseph M.; Masoner, Jason R.; Cozzarelli, Isabelle M.; Kolpin, Dana W.; Stevenson, Bradley S.

2016-01-01

Landfills are the final repository for most of the discarded material from human society and its “built environments.” Microorganisms subsequently degrade this discarded material in the landfill, releasing gases (largely CH4 and CO2) and a complex mixture of soluble chemical compounds in leachate. Characterization of “landfill microbiomes” and their comparison across several landfills should allow the identification of environmental or operational properties that influence the composition of these microbiomes and potentially their biodegradation capabilities. To this end, the composition of landfill microbiomes was characterized as part of an ongoing USGS national survey studying the chemical composition of leachates from 19 non-hazardous landfills across 16 states in the continental U.S. The landfills varied in parameters such as size, waste composition, management strategy, geography, and climate zone. The diversity and composition of bacterial and archaeal populations in leachate samples were characterized by 16S rRNA gene sequence analysis, and compared against a variety of physical and chemical parameters in an attempt to identify their impact on selection. Members of the Epsilonproteobacteria, Gammaproteobacteria, Clostridia, and candidate division OP3 were the most abundant. The distribution of the observed phylogenetic diversity could best be explained by a combination of variables and was correlated most strongly with the concentrations of chloride and barium, rate of evapotranspiration, age of waste, and the number of detected household chemicals. This study illustrates how leachate microbiomes are distinct from those of other natural or built environments, and sheds light on the major selective forces responsible for this microbial diversity. PMID:27148222

Combustion products of plastics as indicators for refuse burning in the atmosphere.

PubMed

Simoneit, Bernd R T; Medeiros, Patricia M; Didyk, Borys M

2005-09-15

Despite all of the economic problems and environmental discussions on the dangers and hazards of plastic materials, plastic production worldwide is growing at a rate of about 5% per year. Increasing techniques for recycling polymeric materials have been developed during the last few years; however, a large fraction of plastics are still being discarded in landfills or subjected to intentional or incidental open-fire burning. To identify specific tracer compounds generated during such open-fire combustion, both smoke particles from burning and plastic materials from shopping bags, roadside trash, and landfill garbage were extracted for gas chromatography-mass spectrometry analyses. Samples were collected in Concón, Chile, an area frequently affected by wildfire incidents and garbage burning, and the United States for comparison. Atmospheric samples from various aerosol sampling programs are also presented as supportive data. The major components of plastic extracts were even-carbon-chain n-alkanes (C16-C40), the plasticizer di-2-ethylhexyl phthalate, and the antioxidants and lubricants/antiadhesives Irganox 1076, Irgafos 168, and its oxidation product tris(2,4-di-tertbutylphenyl) phosphate. Major compounds in smoke from burning plastics include the non-source-specific n-alkanes (mainly even predominance), terephthalic acid, phthalates, and 4-hydroxybenzoic acid, with minor amounts of polycyclic aromatic hydrocarbons (including triphenylbenzenes) and tris(2,4-di-tert-butylphenyl)phosphate. 1,3,5-Triphenylbenzene and tris(2,4-di-tert-butylphenyl)- phosphate were found in detectable amounts in atmospheric samples where plastics and refuse were burned in open fires, and thus we propose these two compounds as specific tracers for the open-burning of plastics.

Using narrowband excitation to confirm that the S∗ state in carotenoids is not a vibrationally-excited ground state species

NASA Astrophysics Data System (ADS)

Jailaubekov, Askat E.; Song, Sang-Hun; Vengris, Mikas; Cogdell, Richard J.; Larsen, Delmar S.

2010-02-01

The hypothesis that S∗ is a vibrationally-excited ground-state population is tested and discarded for two carotenoid samples: β-carotene in solution and rhodopin glucoside embedded in the light harvesting 2 protein from Rhodopseudomonas acidophila. By demonstrating that the transient absorption signals measured in both systems that are induced by broadband (1000 cm -1) and narrowband (50 cm -1) excitation pulses are near identical and hence bandwidth independent, the impulsive stimulated Raman scattering mechanism proposed as the primary source for S∗ generation is discarded. To support this conclusion, previously published multi-pulse pump-dump-probe signals [17] are revisited to discard secondary mechanisms for S∗ formation.

Levels of polychlorinated biphenyls and pesticides in bluefish before and after cooking.

PubMed

Trotter, W J; Corneliussen, P E; Laski, R R; Vannelli, J J

1989-01-01

Similar levels of polychlorinated biphenyls (PCBs), pesticides, and fat were found in 20 correlated uncooked and cooked (baked) bluefish fillets. Fillets averaged 2.5 ppm PCBs as Aroclor 1254 (whole basis) before cooking; after cooking, with the oil drippings and skin discarded, the average PCB level was 2.7 ppm. Although PCBs, lipophilic pesticides, and fat were lost along with oil drippings and skin that were discarded after cooking, the moisture loss in the fillets during cooking compensated for these weight losses almost completely. After the fillets were cooked and the oil drippings and skin were discarded, the PCB content of the fillets was 27% lower on the average.

Strategies for Obtaining Obsidian in Pre-European Contact Era New Zealand

PubMed Central

McCoy, Mark D.; Carpenter, Jonathan

2014-01-01

Archaeological evidence of people's choices regarding how they supply themselves with obsidian through direct access and different types of exchanges gives us insight in to mobility, social networks, and property rights in the distant past. Here we use collections of obsidian artefacts that date to a period of endemic warfare among Maori during New Zealand's Late Period (1500–1769 A.D.) to determine what strategies people engaged in to obtain obsidian, namely (1) collecting raw material directly from a natural source, (2) informal trade and exchange, and (3) formal trade and exchange. These deposits represent a good cross-section of Late Period archaeology, including primary working of raw material at a natural source (Helena Bay), undefended sites where people discarded rubbish and worked obsidian (Bream Head), and a heavily fortified site (Mt. Wellington). We find that most of the obsidian described here was likely obtained directly from natural sources, especially those located on off-shore islands within about 60–70 km of sites. A smaller amount comes from blocks of material transported from an off-shore island a greater distance away, called Mayor Island, in a formal trade and exchange network. This study demonstrates the value of conducting tandem lithic technology and geochemical sourcing studies to understand how people create and maintain social networks during periods of warfare. PMID:24416213

Physical Characteristics of Laboratory Tested Concrete as a Substituion of Gravel on Normal Concrete

NASA Astrophysics Data System (ADS)

Butar-butar, Ronald; Suhairiani; Wijaya, Kinanti; Sebayang, Nono

2018-03-01

Concrete technology is highly potential in the field of construction for structural and non-structural construction. The amount uses of this concrete material raise the problem of solid waste in the form of concrete remaining test results in the laboratory. This waste is usually just discarded and not economically valuable. In solving the problem, this experiment was made new materials by using recycle material in the form of recycled aggregate which aims to find out the strength characteristics of the used concrete as a gravel substitution material on the normal concrete and obtain the value of the substitution composition of gravel and used concrete that can achieve the strength of concrete according to the standard. Testing of concrete characteristic is one of the requirements before starting the concrete mixture. This test using SNI method (Indonesian National Standard) with variation of comparison (used concrete : gravel) were 15: 85%, 25: 75%, 35:65%, 50:50 %, 75: 25%. The results of physical tests obtained the mud content value of the mixture gravel and used concrete is 0.03 larger than the standard of SNI 03-4142-1996 that is equal to 1.03%. so the need watering or soaking before use. The water content test results show an increase in the water content value if the composition of the used concrete increases. While the specific gravity value for variation 15: 85% until 35: 65% fulfilled the requirements of SNI 03-1969-1990. the other variasion show the specifics gravity value included on the type of light materials.

CANCER MORTALITY AMONG UNITED STATES COUNTIES WITH HAZARDOUS WASTE SITES AND SOLE SOURCE DRINKING WATER CONTAMINATION

EPA Science Inventory

Since the late 1950's more than 750 million tons of toxic wastes have been discarded in an estimated 30,000 to 50,000 hazardous waste sies (HWS). he uncontrolled discarding of chemical wastes creates the potential for risks to human health. tilizing the National Priorities Listin...

Shoes on the Highway: Discarded Footwear Inspires a Playwriting Project.

ERIC Educational Resources Information Center

Johnson, Maureen Brady

2003-01-01

Explains a drama assignment based on pictures of discarded shoes. Notes that through character creation, imaginative storytelling, and strong conflicting objectives, students write a 10-minute play about how the shoe got where it was. Outlines the final project, in which these plays would then be presented in a dramatic reading session. (PM)

50 CFR 648.163 - Bluefish Accountability Measures (AMs).

Code of Federal Regulations, 2014 CFR

2014-10-01

...) ACL overage evaluation. The ACL will be evaluated based on a single-year examination of total catch (landings and dead discards). Both landings and dead discards will be evaluated in determining if the ACL... cause the ACL specified in § 648.160(a) to be exceeded, or if the commercial fisheries in all states...

50 CFR 648.163 - Bluefish Accountability Measures (AMs).

Code of Federal Regulations, 2012 CFR

2012-10-01

...) ACL overage evaluation. The ACL will be evaluated based on a single-year examination of total catch (landings and dead discards). Both landings and dead discards will be evaluated in determining if the ACL... cause the ACL specified in § 648.160(a) to be exceeded, or if the commercial fisheries in all states...

50 CFR 648.163 - Bluefish Accountability Measures (AMs).

Code of Federal Regulations, 2013 CFR

2013-10-01

...) ACL overage evaluation. The ACL will be evaluated based on a single-year examination of total catch (landings and dead discards). Both landings and dead discards will be evaluated in determining if the ACL... cause the ACL specified in § 648.160(a) to be exceeded, or if the commercial fisheries in all states...

76 FR 53652 - Atlantic Highly Migratory Species; Atlantic Shark Management Measures

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-29

... an annual basis over that time series, an average of 780 were released alive and were 350 discarded dead. For oceanic whitetip sharks discarded over the time series, an average of 133 were released alive... time, NMFS is implementing the Recommendations as adopted at the 2010 ICCAT meeting. These...

75 FR 30732 - Atlantic Highly Migratory Species; 2010 Atlantic Bluefin Tuna Quota Specifications

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-02

... opposes the BFT longline dead discard methodology in place since the 2006 ICCAT Annual Meeting, and is... Standing Committee on Research and Statistics (SCRS) approved methodology to calculate dead discards. The... context of impacts to the stock and rebuilding program, as well as the socio-economic impacts for the...

Delignification of high kappa number soda-ODiMAQ pulps with a polyoxometalate

Treesearch

Edward L. Springer; Aziz Ahmed

2001-01-01

Increased use of pressure sensitive adhesives for labels and stamps has introduced another contaminant into the office paper stream: silicone- coated release liners. This study examines methods and conditions for removal of contaminants, including these liners, from a typical batch of discarded office papers. Removal of contaminants contained in the furnish were...

Recyclability of mixed office waste papers containing pressure sensitive adhesives and silicone release liners

Treesearch

Julie Hess; Roberta Sena-Gomes; Lisa Davie; Marguerite Sykes

2001-01-01

Increased use of pressure sensitive adhesives for labels and stamps has introduced another contaminant into the office paper stream: silicone- coated release liners. This study examines methods and conditions for removal of contaminants, including these liners, from a typical batch of discarded office papers. Removal of contaminants contained in the furnish were...

Caution needed in using oral polio vaccine beyond the cold chain: Vaccine vial monitors may be unreliable at high temperatures

PubMed Central

Shrivastava, Ashutosh; Gupta, Neeraj; Upadhyay, Pramod; Puliyel, Jacob

2012-01-01

Background & objectives: Stabilized live attenuated oral polio vaccine (OPV) is used to immunize children up to the age of five years to prevent poliomyelitis. It is strongly advised that the cold-chain should be maintained until the vaccine is administered. It is assumed, that vaccine vial monitors (VVMs) are reliable at all temperatures. VVMs are tested at 37°C and it is assumed that the labels reach discard point before vaccine potency drops to >0.6 log10. This study was undertaken to see if VVMs were reliable when exposed to high temperatures as can occur in field conditions in India. Methods: Vaccine vials with VVMs were incubated (10 vials for each temperature) in an incubator at different temperatures at 37, 41, 45 and 49.5°C. Time-lapse photographs of the VVMs on vials were taken hourly to look for their discard-point. Results: At 37 and 41°C the VVMs worked well. At 45°C, vaccine potency is known to drop to the discard level within 14 h whereas the VVM discard point was reached at 16 h. At 49.5°C the VVMs reached discard point at 9 h when these should have reached it at 3 h. Conclusion: Absolute reliance cannot be placed on VVM in situation where environmental temperatures are high. Caution is needed when using ‘outside the cold chain’ (OCC) protocols. PMID:22664500

Is Decoupling GDP Growth from Environmental Impact Possible?

PubMed Central

Sutton, Paul C.; Werner, Adrian D.; Costanza, Robert; Mohr, Steve H.; Simmons, Craig T.

2016-01-01

The argument that human society can decouple economic growth—defined as growth in Gross Domestic Product (GDP)—from growth in environmental impacts is appealing. If such decoupling is possible, it means that GDP growth is a sustainable societal goal. Here we show that the decoupling concept can be interpreted using an easily understood model of economic growth and environmental impact. The simple model is compared to historical data and modelled projections to demonstrate that growth in GDP ultimately cannot be decoupled from growth in material and energy use. It is therefore misleading to develop growth-oriented policy around the expectation that decoupling is possible. We also note that GDP is increasingly seen as a poor proxy for societal wellbeing. GDP growth is therefore a questionable societal goal. Society can sustainably improve wellbeing, including the wellbeing of its natural assets, but only by discarding GDP growth as the goal in favor of more comprehensive measures of societal wellbeing. PMID:27741300

The flow of E-waste material in the Asian region and a reconsideration of international trade policies on E-waste

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shinkuma, Takayoshi; Nguyen Thi Minh Huong

End-of-life home appliances discarded in Japan are reused in Southeast Asia; end-of-life computers are reused in China. E-waste scrap generated in Asia is recycled in China, especially in Guangdong Province. The informal sector in that province has been recycling E-waste scrap and its improper recycling methods have caused serious pollution. In response to this problem, there is wide support for a total ban on E-waste trade, including secondhand items and E-waste scrap. Alternatively, we recommend the establishment of an alternative proper recycling system in Asia that needs cooperation among all Asian countries. First, China is urged to promote proper domesticmore » recycling activities by providing a subsidy for proper recycling. Second, Japan, as a main exporter of E-waste, should establish a traceability system that ensures E-waste scrap exported from Japan will be recycled at proper recycling facilities in China.« less

Amount and type of derelict gear from the declining black pearl oyster aquaculture in Ahe atoll lagoon, French Polynesia.

PubMed

Andréfouët, Serge; Thomas, Yoann; Lo, Cedrik

2014-06-15

Pearl oyster aquaculture is a major activity in French Polynesia atoll lagoons. After the economic decline that characterized the last decade, concerns recently rose about discarded installations and materials that supported aquaculture practices and by facilities abandoned after they had to close their activities. In May 2013, a first inventory of the type and amount of pearl farms derelict gear (PFDG) was achieved on 47 sites in Ahe lagoon. Surveys were conducted within and outside the boundaries of aquaculture concessions. Twenty types of PFDG littered the lagoon floor and the water column. The most impacted areas were near abandoned grafting houses with up to nine types of PFDG. Forty-five percent of the sites were impacted, including outside concessions. While management authorities are fully aware of the problem, this first assessment is a wake-up call to stimulate the cleaning of lagoons, enhance awareness among farmers, and identify potential ecological consequences on lagoon ecosystems. Copyright © 2014 Elsevier Ltd. All rights reserved.

Green coffee seed residue: A sustainable source of antioxidant compounds.

PubMed

Castro, A C C M; Oda, F B; Almeida-Cincotto, M G J; Davanço, M G; Chiari-Andréo, B G; Cicarelli, R M B; Peccinini, R G; Zocolo, G J; Ribeiro, P R V; Corrêa, M A; Isaac, V L B; Santos, A G

2018-04-25

Oil extraction from green coffee seeds generates residual mass that is discarded by agribusiness and has not been previously studied. Bioactive secondary metabolites in coffee include antioxidant phenolic compounds, such as chlorogenic acids. Coffee seeds also contain caffeine, a pharmaceutically important methylxanthine. Here, we report the chemical profile, antioxidant activity, and cytotoxicity of hydroethanolic extracts of green Coffea arabica L. seed residue. The extracts of the green seeds and the residue have similar chemical profiles, containing the phenolic compounds chlorogenic acid and caffeine. Five monoacyl and three diacyl esters of trans-cinnamic acids and quinic acid were identified by ultra-performance liquid chromatography/electrospray ionization-quadruple time of flight mass spectrometry. The residue extract showed antioxidant potential in DPPH, ABTS, and pyranine assays and low cytotoxicity. Thus, coffee oil residue has great potential for use as a raw material in dietary supplements, cosmetic and pharmaceutical products, or as a source of bioactive compounds. Copyright © 2017. Published by Elsevier Ltd.

Colloquium: Fractional calculus view of complexity: A tutorial

NASA Astrophysics Data System (ADS)

West, Bruce J.

2014-10-01

The fractional calculus has been part of the mathematics and science literature for 310 years. However, it is only in the past decade or so that it has drawn the attention of mainstream science as a way to describe the dynamics of complex phenomena with long-term memory, spatial heterogeneity, along with nonstationary and nonergodic statistics. The most recent application encompasses complex networks, which require new ways of thinking about the world. Part of the new cognition is provided by the fractional calculus description of temporal and topological complexity. Consequently, this Colloquium is not so much a tutorial on the mathematics of the fractional calculus as it is an exploration of how complex phenomena in the physical, social, and life sciences that have eluded traditional mathematical modeling become less mysterious when certain historical assumptions such as differentiability are discarded and the ordinary calculus is replaced with the fractional calculus. Exemplars considered include the fractional differential equations describing the dynamics of viscoelastic materials, turbulence, foraging, and phase transitions in complex social networks.

The ideology of convenience. Canned foods in women's magazines (Flanders, 1945-1960).

PubMed

Geyzen, Anneke

2015-11-01

This paper investigates the communication of canned foods in Flanders between 1945 and 1960. It forwards the antinomy between convenience and care as theoretical framework, it uses three women's magazines as source material, and it subjects this material to the technique of close reading. The results show that the discursive construction of canned foods differs according to the ideology of the magazines. Whereas the agrarian periodical discarded canned foods as careless convenience that menaced the idea of the good housewife, the socialist and the commercial publications undeniably accepted them as caring convenience that could facilitate the household chores of working women. The analysis, thus, deals with the ideological aspect of convenience food, an aspect that has only rarely been examined. Copyright © 2015 Elsevier Ltd. All rights reserved.

A review of the promises and challenges of micro-concentrator photovoltaics

NASA Astrophysics Data System (ADS)

Domínguez, César; Jost, Norman; Askins, Steve; Victoria, Marta; Antón, Ignacio

2017-09-01

Micro concentrator photovoltaics (micro-CPV) is an unconventional approach for developing high-efficiency low-cost PV systems. The micrifying of cells and optics brings about an increase of efficiency with respect to classical CPV, at the expense of some fundamental challenges at mass production. The large costs linked to miniaturization under conventional serial-assembly processes raise the need for the development of parallel manufacturing technologies. In return, the tiny sizes involved allows exploring unconventional optical architectures or revisiting conventional concepts that were typically discarded because of large material consumption or high bulk absorption at classical CPV sizes.

Study on status quo of shipbreaking sector and strategies

NASA Astrophysics Data System (ADS)

Shen, Wei; Xing, Guojing

2017-11-01

In recent years, the quantity of broken obsolete vessels tends to rise year by year in the shipbreaking sector, but breaking down obsolete vessels is one of vessel operations with high pollution and high risk, involving proper disposal of hazardous substances, bulge discarded oils and other materials, and thus causing great danger and harm. In this paper the author investigates mainly the status quo of the shipbreaking sector, comes up with the “green-shipbreaking” concept, analyzes main problems currently present in the shipbreaking sector and presents proper strategies and recommendations to deal with them.

Smart Distributed Sensor Fields: Algorithms for Tactical Sensors

DTIC Science & Technology

2013-12-23

ranging from detecting, identifying, localizing/tracking interesting events, discarding irrelevant data, to providing actionable intelligence currently...tracking interesting events, discarding irrelevant data, to providing actionable intelligence currently requires significant human super- vision. Human...view of the overall system. The main idea is to reduce the problem to the relevant data, and then reason intelligently over that data. This process

50 CFR Table 1b to Part 679 - Discard and Disposition Codes

Code of Federal Regulations, 2010 CFR

2010-10-01

.... 63 Deadloss (crab only). 79 Halibut retained for future sale (Halibut only). 87 Overage (Specify overage type in comment). 62 Tagged Fish (Exempt from IFQ). 64 Whole fish/bait, not sold. Used as bait on board vessel. 92 Whole fish/bait, sold. 61 Whole fish/discard at sea.Whole groundfish and prohibited...

Plate Waste and Attitudes among High School Lunch Program Participants

ERIC Educational Resources Information Center

Haas, Jessica; Cunningham-Sabo, Leslie; Auld, Garry

2014-01-01

Purpose/Objectives: The purpose of this study was to determine: (1) What foods high school students participating in the National School Lunch Program (NSLP) are discarding the most? (2) How much of these foods they are discarding? and (3) What are their perceptions towards school lunch? Methods: Researchers measured plate waste at two high…

Eco-friendly synthesis for MCM-41 nanoporous materials using the non-reacted reagents in mother liquor.

PubMed

Ng, Eng-Poh; Goh, Jia-Yi; Ling, Tau Chuan; Mukti, Rino R

2013-03-04

Nanoporous materials such as Mobil composite material number 41 (MCM-41) are attractive for applications such as catalysis, adsorption, supports, and carriers. Green synthesis of MCM-41 is particularly appealing because the chemical reagents are useful and valuable. We report on the eco-friendly synthesis of MCM-41 nanoporous materials via multi-cycle approach by re-using the non-reacted reagents in supernatant as mother liquor after separating the solid product. This approach was achieved via minimal requirement of chemical compensation where additional fresh reactants were added into the mother liquor followed by pH adjustment after each cycle of synthesis. The solid product of each successive batch was collected and characterized while the non-reacted reagents in supernatant can be recovered and re-used to produce subsequent cycle of MCM-41. The multi-cycle synthesis is demonstrated up to three times in this research. This approach suggests a low cost and eco-friendly synthesis of nanoporous material since less waste is discarded after the product has been collected, and in addition, product yield can be maintained at the high level.

Eco-friendly synthesis for MCM-41 nanoporous materials using the non-reacted reagents in mother liquor

PubMed Central

2013-01-01

Nanoporous materials such as Mobil composite material number 41 (MCM-41) are attractive for applications such as catalysis, adsorption, supports, and carriers. Green synthesis of MCM-41 is particularly appealing because the chemical reagents are useful and valuable. We report on the eco-friendly synthesis of MCM-41 nanoporous materials via multi-cycle approach by re-using the non-reacted reagents in supernatant as mother liquor after separating the solid product. This approach was achieved via minimal requirement of chemical compensation where additional fresh reactants were added into the mother liquor followed by pH adjustment after each cycle of synthesis. The solid product of each successive batch was collected and characterized while the non-reacted reagents in supernatant can be recovered and re-used to produce subsequent cycle of MCM-41. The multi-cycle synthesis is demonstrated up to three times in this research. This approach suggests a low cost and eco-friendly synthesis of nanoporous material since less waste is discarded after the product has been collected, and in addition, product yield can be maintained at the high level. PMID:23497184

Eco-friendly synthesis for MCM-41 nanoporous materials using the non-reacted reagents in mother liquor

NASA Astrophysics Data System (ADS)

Ng, Eng-Poh; Goh, Jia-Yi; Ling, Tau Chuan; Mukti, Rino R.

2013-03-01

Nanoporous materials such as Mobil composite material number 41 (MCM-41) are attractive for applications such as catalysis, adsorption, supports, and carriers. Green synthesis of MCM-41 is particularly appealing because the chemical reagents are useful and valuable. We report on the eco-friendly synthesis of MCM-41 nanoporous materials via multi-cycle approach by re-using the non-reacted reagents in supernatant as mother liquor after separating the solid product. This approach was achieved via minimal requirement of chemical compensation where additional fresh reactants were added into the mother liquor followed by pH adjustment after each cycle of synthesis. The solid product of each successive batch was collected and characterized while the non-reacted reagents in supernatant can be recovered and re-used to produce subsequent cycle of MCM-41. The multi-cycle synthesis is demonstrated up to three times in this research. This approach suggests a low cost and eco-friendly synthesis of nanoporous material since less waste is discarded after the product has been collected, and in addition, product yield can be maintained at the high level.

Determination of mercury in agroindustrial samples by flow-injection cold vapor atomic absorption spectrometry using ion exchange and reductive elution.

PubMed

Gomes Neto, J A; Zara, L F; Rocha, J C; Santos, A; Dakuzaku, C S; Nóbrega, J A

2000-03-06

A flow-injection system with a Chelite-S(R) cationic resin packed minicolumn is proposed for the determination of trace levels of mercury in agroindustrial samples by cold vapor atomic absorption spectrometry. Improved sensitivity and selectivity are attained since mercuric ions are on-line concentrated whereas other potential interferents are discarded. With on-line reductive elution procedure, concentrated hydrochloric acid could be replaced by 10% w/v SnCl(2), in 6 M HCl as eluent. The reversed-intermittent stream either carries the atomic mercury to the flow cell in the forward direction or removes the residue from reactor/gas-liquid separator to a discarding flask in the opposite direction. Concentration and volume of reagent, acidity, flow rates, commutation times and potential interfering species were investigated. For 120 s preconcentration time, the proposed system handles about 25 samples h(-1) (50.0-500 ng l(-1)), consuming about 10 ml sample and 5 mg SnCl(2) per determination. The detection limit is 0.8 ng l(-1) and the relative standard deviation (RSD) (n=12) of a 76.7 ng l(-1) sample is about 5%. Results are in agreement with certified value of standard materials at 95% confidence level and good recoveries (97-128%) of spiked samples were found.

Life history of a large flake biface

NASA Astrophysics Data System (ADS)

Baena Preysler, Javier; Torres Navas, Concepción; Sharon, Gonen

2018-06-01

Bifaces, primarily handaxes and cleavers, are the hallmark of the Acheulian techno-complex lithic industry. They spread across Africa and Eurasia during the Early to Middle Pleistocene. While many attempts have been made to define and describe the typology and technology of these tools, most focus on a single stage in their manufacture and usage, from quarry to discard. These attempts are fragmented, primarily due to the fact that at no single site are all stages of biface manufacture and use represented. An additional factor that appears to impede attempts to present the full "life cycle" of bifaces is the view of all Acheulian assemblages as belonging to a single cultural entity. While all assemblages belong to the same techno-complex, distinct stages and phases should be recognized, each different in typology, technology, and probably also in chronology. This research focuses on the large flake stage of the Acheulian. Data accumulated over many years of research from different regions are analyzed together in an attempt to present a holistic view of the life cycle of a biface. The study of particular Acheulian sites from the Levant and Western Europe enables us to reconstruct all stages of the biface, from raw material exploitation to final discard. The result is a model more comprehensive and precise than those suggested previously for understanding the Large Flake Acheulian.

COST-EFFECTIVE RARE EARTH ELEMENT RECYCLING PROCESS FROM INDUSTRIAL SCRAP AND DISCARDED ELECTRONIC PRODUCTS TO VALUABLE MAGNETIC ALLOYS AND PERMANENT MAGNETS - PHASE II

EPA Science Inventory

Rare earth element (REE) based Nd-Fe-B and Sm-Co permanent magnets have been widely used because of their excellent magnetic properties. The applications of Nd-Fe-B and Sm-Co rare earth permanent magnets include hybrid electric vehicles (HEVs), power generators for wind tur...

Radio-frequency dielectric drying of short lengths of northern red oak

Treesearch

William T. Simpson

1980-01-01

For most uses hardwoods are dried as entire boards that include all defective portions discarded after drying. The United States has a large resource of low-quality hardwoods and the potential exists for significant savings in energy and in dryer capacity by cutting out defects before drying. One approach could use radio frequency drying. In this investigation short...

77 FR 27374 - Fisheries of the Caribbean, Gulf of Mexico, and South Atlantic; Snapper-Grouper Fishery Off the...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-10

... the overfishing level is unknown, the current mortality is unknown and discards are poorly known.'' A... biological catch (ABC) level of zero (landings only) for speckled hind and warsaw grouper provided by the Council's SSC. The SSC did not provide a recommendation for an acceptable level of discard mortality and...

75 FR 63780 - Fisheries of the Caribbean, Gulf of Mexico, and South Atlantic; Reef Fish Fishery of the Gulf of...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-18

... objective of the 2009 Southeast Data, Assessment, and Review (SEDAR) update assessment for Gulf red grouper... resulted from the discard sizes for headboats, which were assigned using headboat observer data, and the discard sizes for the private and charter boats, which were assigned using a combination of the Mote...

Distributed Decision Making in a Dynamic Network Environment

DTIC Science & Technology

1990-01-01

protocols, particularly when traffic arrival statistics are varying or unknown, and loads are high. Both nonpreemptive and preemptive repeat disciplines are...The simulation model allows general value functions, continuous time operation, and preemptive or nonpreemptive service. For reasons of tractability... nonpreemptive LIFO, (4) nonpreemptive LIFO with discarding, (5) nonpreemptive HOL, (6) nonpreemp- tive HOL with discarding, (7) preemptive repeat HOL, (8

77 FR 69426 - Fisheries of the Northeastern United States; Atlantic Mackerel, Squid, and Butterfish Fisheries...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-19

...., eastern standard time, on December 10, 2012. ADDRESSES: Copies of supporting documents used by the Mid.... The Commercial ACT would be further reduced by a discard rate of 3.11 percent (mean plus one standard deviation of discards from 1999-2008), to arrive at the proposed DAH of 33,821 mt. The DAH would be the...

High Post-Capture Survival for Sharks, Rays and Chimaeras Discarded in the Main Shark Fishery of Australia?

PubMed Central

Braccini, Matias; Van Rijn, Jay; Frick, Lorenz

2012-01-01

Most sharks, rays and chimaeras (chondrichthyans) taken in commercial fisheries are discarded (i.e. returned to the ocean either dead or alive). Quantifying the post-capture survival (PCS) of discarded species is therefore essential for the improved management and conservation of this group. For all chondrichthyans taken in the main shark fishery of Australia, we quantified the immediate PCS of individuals reaching the deck of commercial shark gillnet fishing vessels and applied a risk-based method to semi-quantitatively determine delayed and total PCS. Estimates of immediate, delayed and total PCS were consistent, being very high for the most commonly discarded species (Port Jackson shark, Australian swellshark, and spikey dogfish) and low for the most important commercial species (gummy and school sharks). Increasing gillnet soak time or water temperature significantly decreased PCS. Chondrichthyans with bottom-dwelling habits had the highest PCS whereas those with pelagic habits had the lowest PCS. The risk-based approach can be easily implemented as a standard practice of on-board observing programs, providing a convenient first-step assessment of the PCS of all species taken in commercial fisheries. PMID:22384270

High post-capture survival for sharks, rays and chimaeras discarded in the main shark fishery of Australia?

PubMed

Braccini, Matias; Van Rijn, Jay; Frick, Lorenz

2012-01-01

Most sharks, rays and chimaeras (chondrichthyans) taken in commercial fisheries are discarded (i.e. returned to the ocean either dead or alive). Quantifying the post-capture survival (PCS) of discarded species is therefore essential for the improved management and conservation of this group. For all chondrichthyans taken in the main shark fishery of Australia, we quantified the immediate PCS of individuals reaching the deck of commercial shark gillnet fishing vessels and applied a risk-based method to semi-quantitatively determine delayed and total PCS. Estimates of immediate, delayed and total PCS were consistent, being very high for the most commonly discarded species (Port Jackson shark, Australian swellshark, and spikey dogfish) and low for the most important commercial species (gummy and school sharks). Increasing gillnet soak time or water temperature significantly decreased PCS. Chondrichthyans with bottom-dwelling habits had the highest PCS whereas those with pelagic habits had the lowest PCS. The risk-based approach can be easily implemented as a standard practice of on-board observing programs, providing a convenient first-step assessment of the PCS of all species taken in commercial fisheries.

Compliance of Saudi dental students with infection control guidelines.

PubMed

Ahmad, Ibrahim Ali; Rehan, Elaf Ali; Pani, Sharat Chandra

2013-08-01

The aim of this study was to investigate compliance of dental students in a Saudi dental school with recommended infection control protocols. A pilot-tested questionnaire concerning various aspects of infection control practices was distributed to 330 dental students. The response rate was 93.9% (n = 311). About 99% of students recorded the medical history of their patients and 80% were vaccinated against hepatitis B. The highest compliance (100%) with recommended guidelines was reported for wearing gloves and use of a new saliva ejector for each patient. Over 90% of the respondents changed gloves between patients, wore face masks, changed hand instruments, burs and handpieces between patients, used a rubber dam in restorative procedures and discarded sharp objects in special containers. A lower usage rate was reported for changing face masks between patients (81%), disinfecting impression materials (87%) and dental prosthesis (74%) and wearing gowns (57%). Eye glasses and face shield were used by less than one-third of the sample. The majority of students were found to be in compliance with most of the investigated infection control measures. Nevertheless, further education is needed to improve some infection control measures including vaccination for Hepatitis B virus (HBV), wearing eye glasses, gowns and face shields and disinfecting impression materials and dental prostheses. © 2013 FDI World Dental Federation.

The fragmented character of Middle Palaeolithic stone tool technology.

PubMed

Turq, Alain; Roebroeks, Wil; Bourguignon, Laurence; Faivre, Jean-Philippe

2013-11-01

The importance of the transport of stone artefacts in structuring Neandertal lithic assemblages has often been addressed, but the degree to which this led to fragmentation of lithic reduction over Middle Palaeolithic landscapes has not been explicitly studied thus far. Large-scale excavations of Middle Palaeolithic open-air sites and refitting studies of the retrieved assemblages have yielded new, high-resolution data on the mobile aspects of Neandertal stone tool technology. In this paper, we integrate lithic technology and raw material data from recent studies of Middle Palaeolithic open-air and rock shelter sites in Western Europe. We demonstrate that the results of a variety of typological, technological (especially refitting), and lithological studies have important consequences for our knowledge of the acquisition of raw materials and subsequent production, usage and discard of stone artefacts in the Middle Palaeolithic. Neandertal production and use of stone tools was fragmented in three domains: the spatial, the temporal and the social domain. We show that this versatile segmentation of stone artefact handling strategies is a main determinant of the character of the Neandertal archaeological record. Our data testify to ubiquitous and continuous transport of stone artefacts of a wide variety of forms, picked by Neandertals using selection criteria that were sometimes far removed from what archaeologists have traditionally considered, and to some degree still consider, to be desired end products of knapping activities. The data presented here testify to the variability and versatility of Middle Palaeolithic stone tool technology, whose fragmented character created very heterogeneous archaeological assemblages, usually the product of a wide variety of independent import, use, discard and/or subsequent transport events. Copyright © 2013 Elsevier Ltd. All rights reserved.

Catch reconstructions reveal that global marine fisheries catches are higher than reported and declining

PubMed Central

Pauly, Daniel; Zeller, Dirk

2016-01-01

Fisheries data assembled by the Food and Agriculture Organization (FAO) suggest that global marine fisheries catches increased to 86 million tonnes in 1996, then slightly declined. Here, using a decade-long multinational ‘catch reconstruction' project covering the Exclusive Economic Zones of the world's maritime countries and the High Seas from 1950 to 2010, and accounting for all fisheries, we identify catch trajectories differing considerably from the national data submitted to the FAO. We suggest that catch actually peaked at 130 million tonnes, and has been declining much more strongly since. This decline in reconstructed catches reflects declines in industrial catches and to a smaller extent declining discards, despite industrial fishing having expanded from industrialized countries to the waters of developing countries. The differing trajectories documented here suggest a need for improved monitoring of all fisheries, including often neglected small-scale fisheries, and illegal and other problematic fisheries, as well as discarded bycatch. PMID:26784963

WEEE and portable batteries in residual household waste: Quantification and characterisation of misplaced waste

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bigum, Marianne, E-mail: mkkb@env.dtu.dk; Petersen, Claus, E-mail: claus_petersen@econet.dk; Christensen, Thomas H., E-mail: thho@env.dtu.dk

2013-11-15

Highlights: • We analyse 26.1 Mg of residual waste from 3129 Danish households. • We quantify and characterise misplaced WEEE and portable batteries. • We compare misplaced WEEE and batteries to collection through dedicated schemes. • Characterisation showed that primarily small WEEE and light sources are misplaced. • Significant amounts of misplaced batteries were discarded as built-in WEEE. - Abstract: A total of 26.1 Mg of residual waste from 3129 households in 12 Danish municipalities was analysed and revealed that 89.6 kg of Waste Electrical and Electronic Equipment (WEEE), 11 kg of batteries, 2.2 kg of toners and 16 kgmore » of cables had been wrongfully discarded. This corresponds to a Danish household discarding 29 g of WEEE (7 items per year), 4 g of batteries (9 batteries per year), 1 g of toners and 7 g of unidentifiable cables on average per week, constituting 0.34% (w/w), 0.04% (w/w), 0.01% (w/w) and 0.09% (w/w), respectively, of residual waste. The study also found that misplaced WEEE and batteries in the residual waste constituted 16% and 39%, respectively, of what is being collected properly through the dedicated special waste collection schemes. This shows that a large amount of batteries are being discarded with the residual waste, whereas WEEE seems to be collected relatively successfully through the dedicated special waste collection schemes. Characterisation of the misplaced batteries showed that 20% (w/w) of the discarded batteries were discarded as part of WEEE (built-in). Primarily alkaline batteries, carbon zinc batteries and alkaline button cell batteries were found to be discarded with the residual household waste. Characterisation of WEEE showed that primarily small WEEE (WEEE directive categories 2, 5a, 6, 7 and 9) and light sources (WEEE directive category 5b) were misplaced. Electric tooth brushes, watches, clocks, headphones, flashlights, bicycle lights, and cables were items most frequently found. It is recommended that these findings are taken into account when designing new or improving existing special waste collection schemes. Improving the collection of WEEE is also recommended as one way to also improve the collection of batteries due to the large fraction of batteries found as built-in. The findings in this study were comparable to other western European studies, suggesting that the recommendations made in this study could apply to other western European countries as well.« less

Secure Container For Discarded Hypodermic Needles

NASA Technical Reports Server (NTRS)

Lee, Angelene M.

1992-01-01

Container designed for safe retention of discarded blood-collecting hypodermic needles and similar sharp objects used in life-science experiments aboard spacecraft. Needles inserted through self-closing lid and retained magnetically. They are inserted, sharp end first, through spring-loaded flap. Long needles and needles on syringes cannot turn around in container. Can be emptied, cleaned, and reused. Used on Earth to provide unusually secure containment of sharp objects.

Why scientific details are important when novel technologies encounter law, politics, and ethics.

PubMed

Goldstein, Lawrence

2010-01-01

This paper focuses on the issue of what to do if a couple who generates embryos chooses to lawfully, and in their (and my) view, ethnically discard those embryos. Specifically, is it appropriate to use the cells that come from "excess" embryos in medical research instead of discarding them when a couple has ceased trying to have any additional children?

Cumulative effects of heat exposure and storage conditions of Oxytocin-in-Uniject in rural Ghana: implications for scale up

PubMed Central

Mullany, Luke C; Newton, Sam; Afari-Asiedu, Samuel; Adiibokah, Edward; Agyemang, Charlotte T; Cofie, Patience; Brooke, Steve; Owusu-Agyei, Seth; Stanton, Cynthia K

2014-01-01

ABSTRACT Objective: Postpartum hemorrhage can be reduced substantially in home deliveries attended by community-based workers by using Oxytocin-in-Uniject (OIU) devices affixed with temperature-time indicators. We characterized the distribution of time to discard of these devices when stored under normal field conditions in Ghana. Methods: Two drug storage simulation studies were conducted in rural Ghana in 2011 and 2012. Devices were transported under refrigeration from manufacture (Argentina) to storage at the study site. Twenty-three field workers each stored at home (unrefrigerated) 25 OIU devices and monitored them daily to record: (1) time to transition from usable to unusable, and (2) continuous digital ambient temperature to determine heat exposure over the simulation period. Time to discard was estimated and compared with mean kinetic temperature exposure of the devices during the shipment and storage phases and with characteristics of the storage locations using Weibull regression models. We used the time to discard distributions in a Monte Carlo simulation to estimate wastage rates in a hypothetical program setting. Results: Time for shipment and transfer to long-term refrigerated storage and mean kinetic temperature during the shipment phase was 8.6 days/10.3°C and 13.4 days/12.1°C, for the first and second simulation studies, respectively. Median (range) time to discard when stored under field conditions (unrefrigerated) was 43 (6 to 59) days and 33 (14 to 50) days, respectively. Mean time to discard was 10.0 days shorter in the second simulation, during which mean kinetic temperature exposure was 3.9°C higher. Simulating a monthly distribution system and assuming typical usage, predicted wastage of product was less than 10%. Conclusion: The time to discard of devices was highly sensitive to small changes in temperature exposure. Under field conditions typical in rural Ghana, OIU packages will have a half-life of approximately 30 to 40 days based on the temperature monitor used during the study. Program managers will need to carefully consider variations in both ambient temperature and rate of use to allocate the appropriate supply level that will maximize coverage and minimize stock loss. PMID:25276588

Cumulative effects of heat exposure and storage conditions of Oxytocin-in-Uniject in rural Ghana: implications for scale up.

PubMed

Mullany, Luke C; Newton, Sam; Afari-Asiedu, Samuel; Adiibokah, Edward; Agyemang, Charlotte T; Cofie, Patience; Brooke, Steve; Owusu-Agyei, Seth; Stanton, Cynthia K

2014-08-01

Postpartum hemorrhage can be reduced substantially in home deliveries attended by community-based workers by using Oxytocin-in-Uniject (OIU) devices affixed with temperature-time indicators. We characterized the distribution of time to discard of these devices when stored under normal field conditions in Ghana. Two drug storage simulation studies were conducted in rural Ghana in 2011 and 2012. Devices were transported under refrigeration from manufacture (Argentina) to storage at the study site. Twenty-three field workers each stored at home (unrefrigerated) 25 OIU devices and monitored them daily to record: (1) time to transition from usable to unusable, and (2) continuous digital ambient temperature to determine heat exposure over the simulation period. Time to discard was estimated and compared with mean kinetic temperature exposure of the devices during the shipment and storage phases and with characteristics of the storage locations using Weibull regression models. We used the time to discard distributions in a Monte Carlo simulation to estimate wastage rates in a hypothetical program setting. Time for shipment and transfer to long-term refrigerated storage and mean kinetic temperature during the shipment phase was 8.6 days/10.3°C and 13.4 days/12.1°C, for the first and second simulation studies, respectively. Median (range) time to discard when stored under field conditions (unrefrigerated) was 43 (6 to 59) days and 33 (14 to 50) days, respectively. Mean time to discard was 10.0 days shorter in the second simulation, during which mean kinetic temperature exposure was 3.9°C higher. Simulating a monthly distribution system and assuming typical usage, predicted wastage of product was less than 10%. The time to discard of devices was highly sensitive to small changes in temperature exposure. Under field conditions typical in rural Ghana, OIU packages will have a half-life of approximately 30 to 40 days based on the temperature monitor used during the study. Program managers will need to carefully consider variations in both ambient temperature and rate of use to allocate the appropriate supply level that will maximize coverage and minimize stock loss.

WEEE and portable batteries in residual household waste: quantification and characterisation of misplaced waste.

PubMed

Bigum, Marianne; Petersen, Claus; Christensen, Thomas H; Scheutz, Charlotte

2013-11-01

A total of 26.1Mg of residual waste from 3129 households in 12 Danish municipalities was analysed and revealed that 89.6kg of Waste Electrical and Electronic Equipment (WEEE), 11kg of batteries, 2.2kg of toners and 16kg of cables had been wrongfully discarded. This corresponds to a Danish household discarding 29g of WEEE (7 items per year), 4g of batteries (9 batteries per year), 1g of toners and 7g of unidentifiable cables on average per week, constituting 0.34% (w/w), 0.04% (w/w), 0.01% (w/w) and 0.09% (w/w), respectively, of residual waste. The study also found that misplaced WEEE and batteries in the residual waste constituted 16% and 39%, respectively, of what is being collected properly through the dedicated special waste collection schemes. This shows that a large amount of batteries are being discarded with the residual waste, whereas WEEE seems to be collected relatively successfully through the dedicated special waste collection schemes. Characterisation of the misplaced batteries showed that 20% (w/w) of the discarded batteries were discarded as part of WEEE (built-in). Primarily alkaline batteries, carbon zinc batteries and alkaline button cell batteries were found to be discarded with the residual household waste. Characterisation of WEEE showed that primarily small WEEE (WEEE directive categories 2, 5a, 6, 7 and 9) and light sources (WEEE directive category 5b) were misplaced. Electric tooth brushes, watches, clocks, headphones, flashlights, bicycle lights, and cables were items most frequently found. It is recommended that these findings are taken into account when designing new or improving existing special waste collection schemes. Improving the collection of WEEE is also recommended as one way to also improve the collection of batteries due to the large fraction of batteries found as built-in. The findings in this study were comparable to other western European studies, suggesting that the recommendations made in this study could apply to other western European countries as well. Copyright © 2013 Elsevier Ltd. All rights reserved.

Analysis of College Students' Personal Health Information Activities: Online Survey.

PubMed

Kim, Sujin; Sinn, Donghee; Syn, Sue Yeon

2018-04-20

With abundant personal health information at hand, individuals are faced with a critical challenge in evaluating the informational value of health care records to keep useful information and discard that which is determined useless. Young, healthy college students who were previously dependents of adult parents or caregivers are less likely to be concerned with disease management. Personal health information management (PHIM) is a special case of personal information management (PIM) that is associated with multiple interactions among varying stakeholders and systems. However, there has been limited evidence to understand informational or behavioral underpinning of the college students' PHIM activities, which can influence their health in general throughout their lifetime. This study aimed to investigate demographic and academic profiles of college students with relevance to PHIM activities. Next, we sought to construct major PHIM-related activity components and perceptions among college students. Finally, we sought to discover major factors predicting core PHIM activities among college students we sampled. A Web survey was administered to collect responses about PHIM behaviors and perceptions among college students from the University of Kentucky from January through March 2017. A total of 1408 college students were included in the analysis. PHIM perceptions, demographics, and academic variations were used as independent variables to predict diverse PHIM activities using a principal component analysis (PCA) and hierarchical regression analyses (SPSS v.24, IBM Corp, Armonk, NY, USA). Majority of the participants were female (956/1408, 67.90%), and the age distribution of this population included an adequate representation of college students of all ages. The most preferred health information resources were family (612/1408, 43.47%), health care professionals (366/1408, 26.00%), friends (27/1408, 1.91%), and the internet (157/1408, 11.15%). Organizational or curatorial activities such as Arranging, Labeling, Categorizing, and Discarding were rated low (average=3.21, average=3.02, average=2.52, and average=2.42, respectively). The PCA results suggested 3 components from perception factors labeled as follows: Assistance (alpha=.85), Awareness (alpha=.716), and Difficulty (alpha=.558). Overall, the Demographics and Academics variables were not significant in predicting dependent variables such as Labeling, Categorizing, Health Education Materials, and Discarding, whereas they were significant for other outcome variables such as Sharing, Collecting, Knowing, Insurance Information, Using, and Owning. College years are a significant time for students to learn decision-making skills for maintaining information, a key aspect of health records, as well as for educators to provide appropriate educational and decision aids in the environment of learning as independent adults. Our study will contribute to better understand knowledge about specific skills and perceptions for college students' practice of effective PHIM throughout their lives. ©Sujin Kim, Donghee Sinn, Sue Yeon Syn. Originally published in the Journal of Medical Internet Research (http://www.jmir.org), 20.04.2018.

To sort or not to sort: the impact of spike-sorting on neural decoding performance.

PubMed

Todorova, Sonia; Sadtler, Patrick; Batista, Aaron; Chase, Steven; Ventura, Valérie

2014-10-01

Brain-computer interfaces (BCIs) are a promising technology for restoring motor ability to paralyzed patients. Spiking-based BCIs have successfully been used in clinical trials to control multi-degree-of-freedom robotic devices. Current implementations of these devices require a lengthy spike-sorting step, which is an obstacle to moving this technology from the lab to the clinic. A viable alternative is to avoid spike-sorting, treating all threshold crossings of the voltage waveform on an electrode as coming from one putative neuron. It is not known, however, how much decoding information might be lost by ignoring spike identity. We present a full analysis of the effects of spike-sorting schemes on decoding performance. Specifically, we compare how well two common decoders, the optimal linear estimator and the Kalman filter, reconstruct the arm movements of non-human primates performing reaching tasks, when receiving input from various sorting schemes. The schemes we tested included: using threshold crossings without spike-sorting; expert-sorting discarding the noise; expert-sorting, including the noise as if it were another neuron; and automatic spike-sorting using waveform features. We also decoded from a joint statistical model for the waveforms and tuning curves, which does not involve an explicit spike-sorting step. Discarding the threshold crossings that cannot be assigned to neurons degrades decoding: no spikes should be discarded. Decoding based on spike-sorted units outperforms decoding based on electrodes voltage crossings: spike-sorting is useful. The four waveform based spike-sorting methods tested here yield similar decoding efficiencies: a fast and simple method is competitive. Decoding using the joint waveform and tuning model shows promise but is not consistently superior. Our results indicate that simple automated spike-sorting performs as well as the more computationally or manually intensive methods used here. Even basic spike-sorting adds value to the low-threshold waveform-crossing methods often employed in BCI decoding.

To sort or not to sort: the impact of spike-sorting on neural decoding performance

NASA Astrophysics Data System (ADS)

Todorova, Sonia; Sadtler, Patrick; Batista, Aaron; Chase, Steven; Ventura, Valérie

2014-10-01

Objective. Brain-computer interfaces (BCIs) are a promising technology for restoring motor ability to paralyzed patients. Spiking-based BCIs have successfully been used in clinical trials to control multi-degree-of-freedom robotic devices. Current implementations of these devices require a lengthy spike-sorting step, which is an obstacle to moving this technology from the lab to the clinic. A viable alternative is to avoid spike-sorting, treating all threshold crossings of the voltage waveform on an electrode as coming from one putative neuron. It is not known, however, how much decoding information might be lost by ignoring spike identity. Approach. We present a full analysis of the effects of spike-sorting schemes on decoding performance. Specifically, we compare how well two common decoders, the optimal linear estimator and the Kalman filter, reconstruct the arm movements of non-human primates performing reaching tasks, when receiving input from various sorting schemes. The schemes we tested included: using threshold crossings without spike-sorting; expert-sorting discarding the noise; expert-sorting, including the noise as if it were another neuron; and automatic spike-sorting using waveform features. We also decoded from a joint statistical model for the waveforms and tuning curves, which does not involve an explicit spike-sorting step. Main results. Discarding the threshold crossings that cannot be assigned to neurons degrades decoding: no spikes should be discarded. Decoding based on spike-sorted units outperforms decoding based on electrodes voltage crossings: spike-sorting is useful. The four waveform based spike-sorting methods tested here yield similar decoding efficiencies: a fast and simple method is competitive. Decoding using the joint waveform and tuning model shows promise but is not consistently superior. Significance. Our results indicate that simple automated spike-sorting performs as well as the more computationally or manually intensive methods used here. Even basic spike-sorting adds value to the low-threshold waveform-crossing methods often employed in BCI decoding.

Bycatch in the Maldivian pole-and-line tuna fishery

PubMed Central

Miller, Kelsey I.; Nadheeh, Ibrahim; Jauharee, A. Riyaz; Anderson, R. Charles; Adam, M. Shiham

2017-01-01

Tropical tuna fisheries are among the largest worldwide, with some having significant bycatch issues. However, pole-and-line tuna fisheries are widely believed to have low bycatch rates, although these have rarely been quantified. The Maldives has an important pole-and-line fishery, targeting skipjack tuna (Katsuwonus pelamis). In the Maldives, 106 pole-and-line tuna fishing days were observed between August 2014 and November 2015. During 161 fishing events, tuna catches amounted to 147 t: 72% by weight was skipjack, 25% yellowfin tuna (Thunnus albacares) and 3% other tunas. Bycatch (all non-tuna species caught plus all tuna discards) amounted to 951 kg (0.65% of total tuna catch). Most of the bycatch (95%) was utilized, and some bycatch was released alive, so dead discards were particularly low (0.02% of total tuna catch, or 22 kg per 100 t). Rainbow runner (Elagatis bipinnulata) and dolphinfish (Coryphaena hippurus) together constituted 93% of the bycatch. Live releases included small numbers of silky sharks (Carcharhinus falciformis) and seabirds (noddies, Anous tenuirostris and A. stolidus). Pole-and-line tuna fishing was conducted on free schools and schools associated with various objects (Maldivian anchored fish aggregating devices [aFADs], drifting FADs from western Indian Ocean purse seine fisheries, other drifting objects and seamounts). Free school catches typically included a high proportion of large skipjack and significantly less bycatch. Associated schools produced more variable tuna catches and higher bycatch rates. Fishing trips in the south had significantly lower bycatch rates than those in the north. This study is the first to quantify bycatch rates in the Maldives pole-and-line tuna fishery and the influence of school association on catch composition. Ratio estimator methods suggest roughly 552.6 t of bycatch and 27.9 t of discards are caught annually in the fishery (based on 2015 national catch), much less than other Indian Ocean tuna fisheries, e.g. gillnet, purse-seine, and longline. PMID:28542258

Bycatch in the Maldivian pole-and-line tuna fishery.

PubMed

Miller, Kelsey I; Nadheeh, Ibrahim; Jauharee, A Riyaz; Anderson, R Charles; Adam, M Shiham

2017-01-01

Tropical tuna fisheries are among the largest worldwide, with some having significant bycatch issues. However, pole-and-line tuna fisheries are widely believed to have low bycatch rates, although these have rarely been quantified. The Maldives has an important pole-and-line fishery, targeting skipjack tuna (Katsuwonus pelamis). In the Maldives, 106 pole-and-line tuna fishing days were observed between August 2014 and November 2015. During 161 fishing events, tuna catches amounted to 147 t: 72% by weight was skipjack, 25% yellowfin tuna (Thunnus albacares) and 3% other tunas. Bycatch (all non-tuna species caught plus all tuna discards) amounted to 951 kg (0.65% of total tuna catch). Most of the bycatch (95%) was utilized, and some bycatch was released alive, so dead discards were particularly low (0.02% of total tuna catch, or 22 kg per 100 t). Rainbow runner (Elagatis bipinnulata) and dolphinfish (Coryphaena hippurus) together constituted 93% of the bycatch. Live releases included small numbers of silky sharks (Carcharhinus falciformis) and seabirds (noddies, Anous tenuirostris and A. stolidus). Pole-and-line tuna fishing was conducted on free schools and schools associated with various objects (Maldivian anchored fish aggregating devices [aFADs], drifting FADs from western Indian Ocean purse seine fisheries, other drifting objects and seamounts). Free school catches typically included a high proportion of large skipjack and significantly less bycatch. Associated schools produced more variable tuna catches and higher bycatch rates. Fishing trips in the south had significantly lower bycatch rates than those in the north. This study is the first to quantify bycatch rates in the Maldives pole-and-line tuna fishery and the influence of school association on catch composition. Ratio estimator methods suggest roughly 552.6 t of bycatch and 27.9 t of discards are caught annually in the fishery (based on 2015 national catch), much less than other Indian Ocean tuna fisheries, e.g. gillnet, purse-seine, and longline.

Material identification of real impact sounds: effects of size variation in steel, glass, wood, and plexiglass plates.

PubMed

Giordano, Bruno L; McAdams, Stephen

2006-02-01

Identification of the material of struck objects of variable size was investigated. Previous studies on this issue assumed recognition to be based on acoustical measures of damping. This assumption was tested, comparing the power of a damping measure in explaining identification data with that of several other acoustical descriptors. Listeners' performance was perfect with respect to gross material categories (steel-glass and wood-plexiglass) comprising materials of vastly different mechanical properties. Impaired performance was observed for materials within the same gross category, identification being based on the size of the objects alone. The damping descriptor accounted for the identification of the gross categories. However other descriptors such as signal duration explained the results equally well. Materials within the same gross category were identified mainly on the basis of signal frequency. Overall poor support for the relevance of damping to material perception was found. An analysis of the acoustical support for perfect material identification was carried out. Sufficient acoustical information for perfect performance was found. Thus, procedural biases for the origin of the effects of size could be discarded, pointing toward their cognitive, rather than methodological nature. Identification performance was explained in terms of the regularities of the everyday acoustical environment.

Glioma tissue obtained by modern ultrasonic aspiration with a simple sterile suction trap for primary cell culture and pathological evaluation.

PubMed

Schroeteler, Juliane; Reeker, Ralf; Suero Molina, Eric; Brokinkel, Benjamin; Holling, Markus; Grauer, Oliver M; Senner, Volker; Stummer, Walter; Ewelt, Christian

2014-01-01

Ultrasonic aspiration is widely used in the resection of brain tumors. Nevertheless, tumor tissue fragments obtained by ultrasonic aspiration are usually discarded. In this study, we demonstrate that these fragments are possible sources of material for histopathological study and tissue culture and compare their microscopic features and viability in tissue culture of cavitron ultrasonic surgical aspirator tissue fragments. Brain tumor tissue collected by ultrasonic aspiration (CUSA EXcel®; Integra Radionics Inc.) in a simple sterile suction trap during resection was processed for primary cell culture. Cell viability and immunohistological markers were measured by the WST-1 test, microscopy and immunofluorescent evaluation. Six gliomas are presented to demonstrate that these tissue fragments show good preservation of histological detail and tissue viability in culture. Utilization of this material may facilitate pathological interpretation by providing a more representative sample of tumor histology as well as an adequate and sterile biosource of material for tissue culture studies.

Single frequency multitransmitter telemetry

NASA Technical Reports Server (NTRS)

Carreno, Victor A. (Inventor)

1986-01-01

The invention relates to a single frequency multitransmitter telemetry system that will deliver a substantial amount of data at low cost. The invention consists essentially of a plurality of sensor transmitter units at different locations, with individual signal conditioning and logic, which send sampled data signals to a single receiver. The transmitters operate independently on the same frequency in a frequency shift keying modulation system and are not synchronized to the receiver. The problem of reception of data from more than one transmitter simultaneously is solved by discarding the data - when there is overlap of data from two or more transmitters, the data is discarded and when there is no overlap the data is retained. The invention utilizes a unique overlap detection technique to determine if data should be retained or discarded. When data is received from a transmitter, it goes into a shift register.

An intensive time-series evaluation of the effectiveness of cognitive behaviour therapy for hoarding disorder: a 2-year prospective study.

PubMed

Pollock, Lisa; Kellett, Stephen; Totterdell, Peter

2014-01-01

To intensively evaluate the effectiveness of cognitive-behavioural therapy (CBT) for Hoarding Disorder. An ABC with extended follow-up N=1 single-case experimental design (SCED) measured discard incidence/frequency/volume and associated cognitions, behaviours and emotions in a 644-day time series. Following a 4-week baseline (A), CBT was initially delivered via out-patient sessions (B) and then out-patient sessions plus domiciliary visits (C). Total treatment duration was 45 sessions (65 weeks) and follow-up was 4 sessions over 23 weeks. There was a significant increase in frequency and volume of discard, with a reliable and clinically significant reduction in hoarding. The addition of domiciliary visits did not significantly improve discard ability. The clinical utility of domiciliary visits whilst treating of hoarding is discussed and study limitations noted.

Evaluation of the effect of reprocessing on the structure and properties of low density polyethylene/thermoplastic starch blends.

PubMed

Peres, Anderson M; Pires, Ruthe R; Oréfice, Rodrigo L

2016-01-20

The great quantity of synthetic plastic discarded inappropriately in the environment is forcing the search for materials that can be reprocessable and biodegradable. Blends between synthetic polymers and natural and biodegradable polymers can be good candidates of such novel materials because they can combine processability with biodegradation and the use of renewable raw materials. However, traditional polymers usually present high levels of recyclability and use the well-established recycling infrastructure that can eventually be affected by the introduction of systems containing natural polymers. Thus, this work aims to evaluate the effect of reprocessing (simulated here by multiple extrusions) on the structure and properties of a low density polyethylene/thermoplastic starch (LDPE/TPS) blend compared to LDPE. The results indicated that multiple extrusion steps led to a reduction in the average size of the starch-rich phases of LDPE/TPS blends and minor changes in the mechanical and rheological properties of the materials. Such results suggest that the LDPE/TPS blend presents similar reprocessability to the LDPE for the experimental conditions used. Copyright © 2015 Elsevier Ltd. All rights reserved.

Flow chemistry and polymer-supported pseudoenantiomeric acylating agents enable parallel kinetic resolution of chiral saturated N-heterocycles

NASA Astrophysics Data System (ADS)

Kreituss, Imants; Bode, Jeffrey W.

2017-05-01

Kinetic resolution is a common method to obtain enantioenriched material from a racemic mixture. This process will deliver enantiopure unreacted material when the selectivity factor of the process, s, is greater than 1; however, the scalemic reaction product is often discarded. Parallel kinetic resolution, on the other hand, provides access to two enantioenriched products from a single racemic starting material, but suffers from a variety of practical challenges regarding experimental design that limit its applications. Here, we describe the development of a flow-based system that enables practical parallel kinetic resolution of saturated N-heterocycles. This process provides access to both enantiomers of the starting material in good yield and high enantiopurity; similar results with classical kinetic resolution would require selectivity factors in the range of s = 100. To achieve this, two immobilized quasienantiomeric acylating agents were designed for the asymmetric acylation of racemic saturated N-heterocycles. Using the flow-based system we could efficiently separate, recover and reuse the polymer-supported reagents. The amide products could be readily separated and hydrolysed to the corresponding amines without detectable epimerization.

Multi-kanban mechanism for personal computer disassembly

NASA Astrophysics Data System (ADS)

Udomsawat, Gun; Gupta, Surendra M.; Kamarthi, Sagar V.

2004-12-01

The use of personal computers (PCs) continues to increase every year. According to a 1999 figure, 50 percent of all US households owned PCs, a figure that continues to rise every year. With continuous development of sophisticated software, PCs are becoming increasingly powerful. In addition, the price of a PC continues to steadily decline. Furthermore, the typical life of a PC in the workplace is approximately two to three years while in the home it is three to five years. As these PCs become obsolete, they are replaced and the old PCs are disposed of. It is estimated that between 14 and 20 million PCs are retired annually in the US. While 20 to 30% of the units may be resold, the others are discarded. These discards represent a significant potential source of lead for the waste stream. In some communities, waste cathode ray tubes (CRTs) represent the second largest source of lead in the waste stream after vehicular lead acid batteries. PCs are, therefore, not suitable for dumping in landfills. Besides, several components of a PC can be reused and then there are other valuable materials that can also be harvested. And with the advent of product stewardship, product recovery is the best solution for manufacturers. Disassembly line is perhaps the most suitable set up for disassembling PCs. However, planning and scheduling of disassembly on a disassembly line is complicated. In this paper, we discuss some of the complications including product arrival, demand arrival, inventory fluctuation and production control mechanisms. We then show how to overcome them by implementing a multi-kanban mechanism in the PC disassembly line setting. The multi-kanban mechanism relies on dynamic routing of kanbans according to the state of the system. We investigate the multi-kanban mechanism using simulation and demonstrate that this mechanism is superior to the traditional push system in terms of controlling the system"s inventory while maintaining a decent customer service level.

Dengue and Chikungunya Vector Control Pocket Guide

DTIC Science & Technology

2014-05-01

mosquito eggs, larvae, or pupae. Examples of such items are tarps, discarded bottles, flower pot saucers, and rain gauges. In areas where there...coconut husks, (4) tires, (5) barrels, (6) water storage tanks, (7) bromeliads and axils of banana trees, (8) obstructed roof gutters, (9) plant pot...regularly Store under roof Fill with sand Throw Away/ Recycle Buckets X X X Flower Pot Saucers X X Roof Gutters X Discarded

Diet and scavenging habits of the smooth skate Dipturus innominatus.

PubMed

Forman, J S; Dunn, M R

2012-04-01

The diet of smooth skate Dipturus innominatus was determined from examination of stomach contents of 321 specimens of 29·3-152·0 cm pelvic length, sampled from research and commercial trawlers at depths of 231-789 m on Chatham Rise, New Zealand. The diet was dominated by the benthic decapods Metanephrops challengeri and Munida gracilis, the natant decapod Campylonotus rathbunae and fishes from 17 families, of which hoki Macruronus novaezelandiae, sea perch Helicolenus barathri, various Macrouridae and a variety of discarded fishes were the most important. Multivariate analyses indicated the best predictors of diet variability were D. innominatus length and a spatial model. The diet of small D. innominatus was predominantly small crustaceans, with larger crustaceans, fishes and then scavenged discarded fishes increasing in importance as D. innominatus got larger. Scavenged discards were obvious as fish heads or tails only, or skeletal remains after filleting, often from pelagic species. Demersal fish prey were most frequent on the south and west Chatham Rise, in areas where commercial fishing was most active. Dipturus innominatus are highly vulnerable to overfishing, but discarding practices by commercial fishing vessels may provide a positive feedback to populations through improved scavenging opportunities. © 2012 NIWA. Journal of Fish Biology © 2012 The Fisheries Society of the British Isles.

Flow evaluation of the leaching hazardous materials from spent nickel-cadmium batteries discarded in different water surroundings.

PubMed

Guo, Xingmei; Song, Yan; Nan, Junmin

2018-02-01

The leaching characteristics of hazardous materials from Ni-Cd batteries immersed in four typical water samples, i.e., water with NaCl, river water, tap water, and deionized water, were investigated to evaluate the potential environmental harm of spent Ni-Cd batteries in the water surroundings. It is shown that four water surroundings all could leach hazardous materials from the Ni-Cd batteries. The water with NaCl concentration of 66.7 mg L -1 had the highest leaching ability, the hazardous materials were leached after only approximately 50 days (average time, with a standard deviation of 4.1), while less than 100 days were needed in the others. An electrochemical corrosion is considered to be the main leaching mechanism leading to battery breakage, while the dissolution-deposition process and the powder route result in the leakage and transference of nickel and cadmium materials from the electrodes. The anions, i.e., SO 4 2- and Cl - , and dissolved oxygen in water were demonstrated to be the vital factors that influence the leaching processes. Thus, it is proposed that spent Ni-Cd batteries must be treated properly to avoid potential danger to the environment.

Technical note: Discard the specimen collection swab directly at point of care to improve extensive automated processing in clinical microbiology laboratories.

PubMed

Avolio, Manuela; Grosso, Shamanta; Bruschetta, Graziano; Camporese, Alessandro

2016-10-01

We compared, in terms of microorganisms recovery, the discard of specimen collection swab, after swirling into its medium, directly at point of care, with its placing into the medium and vortexing on arrival in the laboratory. Our results show that these two procedures are overlapped in terms of bacterial recovery. Copyright © 2016 Elsevier B.V. All rights reserved.

Organic and conventional fertilisation procedures on the nitrate, antioxidants and pesticide content in parts of vegetables.

PubMed

Lima, G P P; Teixeira da Silva, Jaime A; Bernhard, A B; Pirozzi, D C Z; Fleuri, L F; Vianello, F

2012-01-01

Different parts of plant foods are generally discarded by consumers such as peel, stalk and leaves, which could however possess a nutritional value. However, few studies have analysed the composition of these marginal foods. The phenolic compound, flavonoid, polyamine, nitrate and pesticide contents of parts of vegetables that are usually discarded--but which were cultivated according to conventional and non-conventional procedures--were analysed to provide suggestions on how to improve the consumption of these parts and to reduce the production of urban solid waste. Few, but significant, differences between the two manuring procedures were observed. Higher nitrate content and the presence of organochlorine pesticides were found in conventional cultivated papaya peel, lemon balm leaves, jack fruit pulp, and beet stalk and peel. Discarded parts of plant foods such as stalk, leaves and peels can be used as a source of antioxidant compounds, such as phenolic compounds.

Discarded Minds: How Gender, Race and Class Biases Prevent Young Women from Obtaining an Adequate Math and Science Education in New York City Public Schools.

ERIC Educational Resources Information Center

Syron, Lisa

This study is a systematic investigation of female participation in mathematics and science classes in New York City schools. Six major findings reported include: (1) young women's low levels of participation in mathematics and science reflect the overall low levels of participation and reveal lack of attention to excellence in mathematics and…

Accidents with potentially hazardous biological material among workers in hospital supporting services.

PubMed

Canini, Silvia Rita Marin da Silva; Gir, Elucir; Machado, Alcyone Artiolli

2005-01-01

Descriptive study was carried out to characterize the occupational accidents involving potentially contaminated material among workers of hospital supporting services. The study reviewed records of workers involved in these accidents and attended at a specialized outpatient clinic of a large tertiary care hospital between January 1997 and October 2001. A total of 2814 workers from different professional categories were attended during this period. Of these, 147 (5.2%) belonged to the hospital supporting services and were the victims of 156 accidents, auxiliary cleaning personnel (80.2%), and over a third of the workers had not received any dose of hepatitis B vaccine (35.4%). Most accidents were due to sharp injuries (96.8%) caused by inadequately discarded hollow needles. Chemoprophylaxis for HIV was not indicated in only 23.1% of cases. We conclude that these workers are also exposed to the possibility of acquiring blood-borne pathogens and that periodical education programs are needed.

Encapsulation of lead from hazardous CRT glass wastes using biopolymer cross-linked concrete systems.

PubMed

Kim, Daeik; Quinlan, Michael; Yen, Teh Fu

2009-01-01

Discarded computer monitors and television sets are identified as hazardous materials due to the high content of lead in their cathode ray tubes (CRTs). Over 98% of lead is found in CRT glass. More than 75% of obsolete electronics including TV and CRT monitors are in storage because appropriate e-waste management and remediation technologies are insufficient. Already an e-waste tsunami is starting to roll across the US and the whole world. Thus, a new technology was developed as an alternative to current disposal methods; this method uses a concrete composite crosslinked with minute amounts of biopolymers and a crosslinking agent. Commercially available microbial biopolymers of xanthan gum and guar gum were used to encapsulate CRT wastes, reducing Pb leachability as measured by standard USEPA methods. In this investigation, the synergistic effect of the crosslinking reaction was observed through blending two different biopolymers or adding a crosslinking agent in biopolymer solution. This CRT-biopolymer-concrete (CBC) composite showed higher compressive strength than the standard concrete and a considerable decrease in lead leachability.

Culture and cognition in the Acheulian industry: a case study from Gesher Benot Ya'aqov.

PubMed

Goren-Inbar, Naama

2011-04-12

The Acheulian presence in the Dead Sea Rift and its environs is characterized by the discontinuity of its cultural manifestations. Nevertheless, the long stratigraphic sequences of the Acheulian Technocomplex provide a unique opportunity for synergetic examination along a temporal trajectory. Hominin cognitive and cultural behaviour are studied at Gesher Benot Ya'aqov through analyses of lithic, palaeontological and palaeobotanical assemblages, as well as the Early-Middle Pleistocene environment, ecology and climate. The study attempts to reconstruct reduction sequences of some major artefact groups at the site, which include raw material acquisition, production, technology, typology, usage and discard. Experimental archaeology illustrates artefact mobility on the palaeo-landscape. Strategies of biomass-exploitation are studied in detail, with other aspects yielding additional information on hominin subsistence and adaptive responses to their environment. The cultural marker of fire and the spatial association of selected categories of finds are integrated in the general synthesis, allowing reconstruction of the cultural and cognitive realm of Acheulian hominins. The synthesis attempts to reassess the abilities, social structure, subsistence and adaptability to the changing environment of hominins in the Levantine Corridor.

Encapsulation of lead from hazardous CRT glass wastes using biopolymer cross-linked concrete systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kim, Daeik; Quinlan, Michael; Yen, Teh Fu

2009-01-15

Discarded computer monitors and television sets are identified as hazardous materials due to the high content of lead in their cathode ray tubes (CRTs). Over 98% of lead is found in CRT glass. More than 75% of obsolete electronics including TV and CRT monitors are in storage because appropriate e-waste management and remediation technologies are insufficient. Already an e-waste tsunami is starting to roll across the US and the whole world. Thus, a new technology was developed as an alternative to current disposal methods; this method uses a concrete composite crosslinked with minute amounts of biopolymers and a crosslinking agent.more » Commercially available microbial biopolymers of xanthan gum and guar gum were used to encapsulate CRT wastes, reducing Pb leachability as measured by standard USEPA methods. In this investigation, the synergistic effect of the crosslinking reaction was observed through blending two different biopolymers or adding a crosslinking agent in biopolymer solution. This CRT-biopolymer-concrete (CBC) composite showed higher compressive strength than the standard concrete and a considerable decrease in lead leachability.« less

Wastage of standardised parenteral nutrition solution - a challenge for neonatal units.

PubMed

Deshmukh, Mangesh; Grzejszczyk, Jessica; Mehta, Shailender; Patole, Sanjay

2018-04-01

Standardised parental nutrition (PN) has been used in many neonatal intensive care unit (NICU). Easy accessibility, better provision of nutrients, reduced prescription errors and cost savings are some of its benefits. Fixed large volume (e.g. 750-1000 mL) and short expiry limit (48 hrs) along with changing metabolic needs of neonates leads to significant wastage of PN solution. To evaluate wastage of PN solution in our 22-bedded NICU. The audit was conducted over 21-month period (July 2015-April 2017). Data on PN use (e.g. type, duration, infused volume, residual after use) was obtained from hospital records. The discarded volume of PN was estimated after subtracting the administered volume based on the rate of infusion from the total volume in the bag. Cumulative "discarded" volume as percentage of the total "supplied" volume was calculated. A total of 305-PN bags (Standardised: Preterm: 222, Term: 83) were used. The estimated total used, discarded, and percentage discarded volumes for standard preterm and term PN were 78.1, 88 L, 53% and 33.5, 49.7 L, and 59.8%, respectively. There was more than 50% wastage of PN solution in our NICU. The estimated cost of this PN wastage was around 21,000 AUD over 21 months. Strategies such as minipack should be explored to prevent such losses.

Glutathione S-transferase iso-enzymes in perfusate from pumped kidneys are associated with delayed graft function

PubMed Central

Hall, Isaac E.; Bhangoo, Ronik S.; Reese, Peter P.; Doshi, Mona D.; Weng, Francis L.; Hong, Kwangik; Lin, Haiqun; Han, Gang; Hasz, Rick D.; Goldstein, Michael J.; Schröppel, Bernd; Parikh, Chirag R.

2014-01-01

Accurate and reliable assessment tools are needed in transplantation. The objective of this prospective, multicenter study was to determine the associations of the alpha and pi iso-enzymes of glutathione S-transferase (GST), measured from perfusate solution at the start and end (base and post) of kidney allograft machine perfusion, with subsequent delayed graft function (DGF). We also compared GST iso-enzyme perfusate levels from discarded versus transplanted kidneys. A total of 428 kidneys were linked to outcomes as recorded by the United Network of Organ Sharing. DGF, defined as any dialysis in the first week of transplant, occurred in 141 recipients (32%). Alpha and pi-GST levels significantly increased during machine perfusion. The adjusted relative risks (95% confidence interval) of DGF with each log-unit increase in base and post pi-GST were 1.14 (1.0-1.28) and 1.33 (1.02-1.72), respectively. Alpha-GST was not independently associated with DGF. There were no significant differences in GST values between discarded and transplanted kidneys, though renal resistance was significantly higher in discarded kidneys. We found pi-GST at the end of machine perfusion to be independently associated with DGF. Further studies should elucidate the utility of GST for identifying injured kidneys with regard to organ allocation, discard and recipient management decisions. PMID:24612768

Soil microbial activities in a constructed soil reed-bed under cheese-dairy farm effluents.

PubMed

Farnet, A M; Prudent, P; Cigna, M; Gros, R

2008-09-01

Soil microbial activities in a reed-bed used for effluent purification of a small cheese-dairy farm under a Mediterranean climate were described and studied. This work aims to demonstrate (i) whether certain enzyme activities used as bioindicators of dairy waste degradation (beta-galactosidase and protease) vary over time, which might influence organic matter degradation and (ii) whether specific microbial communities are selected through contact with the discarded effluent using community level catabolic profiles (CLCPs). beta-galactosidase and protease activities were followed in a 14-month monitoring experiment. These enzyme activities were strongly expressed during the whey-discarding period from February to May. CLCPs using Biolog Ecoplate showed great microbial diversity, as described by Shannon-Weaver index, and no difference was observed in microbial diversity between areas at the receiving end of the reed-bed (where effluent was discarded) and those at the opposite end. This may be explained by successive environmental factors which made enzyme activities vary: whey discarded from February to May and Mediterranean climate conditions (drying-rewetting effects on summer). Microbial enumeration using epifluorescence microscopy also showed a pattern linked to Mediterranean conditions with a drastic decrease in biomass during summer drought. These results on functional biodiversity were correlated with high purification yields: the minimum decrease in Biological Demand in Oxygen was 84% and that in suspended solids was 75%.

Utilization of discard bovine bone as a support for immobilization of recombinant Rhizopus oryzae lipase expressed in Pichia pastoris.

PubMed

Clementz, Adriana L; Del Peso, Gonzalo; Canet, Albert; Yori, Juan C; Valero, Francisco

2016-09-01

In this study the possibility of using discard bovine bone as support for immobilization of Rhizopus oryzae lipase expressed in Pichia pastoris was analyzed. Discard bovine bone were milled and then subjected to a chemical treatment with acetone in order to remove lipids and blood traces. Two types of supports were evaluated: bovine bone and calcined bovine bone for 2 h at 600°C. Supports were characterized by: ICP, SEM, XRD, FTIR, XPS, and N 2 adsorption isotherms. Calcined bovine bone presented appropriate characteristics for the lipase immobilization due to the removal of collagen: high porosity, large surface area and suitable porous structure. Biocatalysts were prepared with different initial enzyme load. For the equilibrium adsorption studies, the Langmuir isotherm was used to fit the data results. The immobilization occurs in monolayer to a value of 35 UA mg -1 . The activities of biocatalysts were tested in transesterification reaction of olive oil. For the enzyme load used in the test, a final yield percentage of 49.6 was achieved after six methanol additions and 180 min of reaction, similar values were obtained using Relizyme as support. Therefore, the bovine bone discard is an economical and appropriate choice for use support immobilization of enzymes. © 2016 American Institute of Chemical Engineers Biotechnol. Prog., 32:1246-1253, 2016. © 2016 American Institute of Chemical Engineers.

Seabird movement reveals the ecological footprint of fishing vessels.

PubMed

Bodey, Thomas W; Jessopp, Mark J; Votier, Stephen C; Gerritsen, Hans D; Cleasby, Ian R; Hamer, Keith C; Patrick, Samantha C; Wakefield, Ewan D; Bearhop, Stuart

2014-06-02

Exploitation of the seas is currently unsustainable, with increasing demand for marine resources placing intense pressure on the Earth's largest ecosystem [1]. The scale of anthropogenic effects varies from local to entire ocean basins [1-3]. For example, discards of commercial capture fisheries can have both positive and negative impacts on scavengers at the population and community-level [2-6], although this is driven by individual foraging behaviour [3,7]. Currently, we have little understanding of the scale at which individual animals initiate such behaviours. We use the known interaction between fisheries and a wide-ranging seabird, the Northern gannet Morus bassanus[3], to investigate how fishing vessels affect individual birds' behaviours in near real-time. We document the footprint of fishing vessels' (≥15 m length) influence on foraging decisions (≤11 km), and a potential underlying behavioural mechanism, by revealing how birds respond differently to vessels depending on gear type and activity. Such influences have important implications for fisheries, including the proposed discard ban [8]), and wider marine management. Copyright © 2014 Elsevier Ltd. All rights reserved.

Impacts of policy and market incentives for solid waste recycling in Dhaka, Bangladesh.

PubMed

Matter, Anne; Ahsan, Mehedi; Marbach, Michelle; Zurbrügg, Christian

2015-05-01

Solid waste mismanagement in Dhaka, Bangladesh, illustrates a well-known market failure which can be summarized as: waste is a resource in the wrong place. Inorganic materials such as plastic or paper can be used to feed the demand for recycled materials in the industrial sector. Organic materials can be converted and used in the nutrient-starved agricultural sector which is currently heavily depending on chemical fertilizers. They are also a feedstock to generate renewable energy in the form of biogas for this energy-starved country relying on diminishing natural gas reserves and increasing import of coal. Reality however does not capitalize on this potential; instead the waste is a burden for municipal authorities who spend large portions of their budgets attempting to transport it out of the city for discharge into landfills. The major part of these materials still remains uncollected in the residential areas and is discarded indiscriminately in open spaces, polluting the residents' living environment including water, soil and air resources, in the city and beyond. Bangladeshi authorities have, to some extent, recognized this market failure and have developed policies to encourage the development of waste recycling activities. It is also important to note that this market failure is only partial: a large, mostly informal recycling sector has developed in Bangladesh, focusing on inorganic recyclables of market value. The fact that this sector remains largely informal means that these actors perceive significant barriers to formalization. Comparatively, the organic waste recycling sector is less driven by market mechanisms. Competition from chemical fertilizers and fossil fuels is fierce and hinders the development of market opportunities for compost and renewable energy. Nevertheless commercial production of compost and biogas from organic municipal waste is formalized and benefiting from policy incentives. Copyright © 2015 Elsevier Ltd. All rights reserved.

Human immunodeficiency virus prevalence, incidence, and residual transmission risk in first-time and repeat blood donations in Zimbabwe: implications on blood safety.

PubMed

Mapako, Tonderai; Mvere, David A; Chitiyo, McLeod E; Rusakaniko, Simbarashe; Postma, Maarten J; van Hulst, Marinus

2013-10-01

National Blood Service Zimbabwe human immunodeficiency virus (HIV) risk management strategy includes screening and discarding of first-time donations, which are collected in blood packs without an anticoagulant (dry pack). To evaluate the impact of discarding first-time donations on blood safety the HIV prevalence, incidence, and residual risk in first-time and repeat donations (wet packs) were compared. Donor data from 2002 to 2010 were retrieved from a centralized national electronic donor database and retrospectively analyzed. Chi-square test was used to compare HIV prevalence with relative risk (RR), and the RR point estimates and 95% confidence interval (CI) are reported. Trend analysis was done using Cochran-Armitage trend test. HIV residual risk estimates were determined using published residual risk estimation models. Over the 9 years the overall HIV prevalence estimates are 1.29% (n = 116,058) and 0.42% (n = 434,695) for first-time and repeat donations, respectively. The overall RR was 3.1 (95% CI, 2.9-3.3; p < 0.0001). The overall mean residual transmission risk of HIV window phase donations in first-time was 1:7384 (range, 1:11,308-1:5356) and in repeat donors it was 1:5496 (range, 1:9943-1:3347). The significantly high HIV prevalence estimates recorded in first-time over repeat donations is indicative of the effectiveness of the HIV risk management strategy. However, comparable residual transmission risk estimates in first-time and repeat donors point to the need to further review the risk management strategies. Given the potential wastage of valuable resources, future studies should focus on the cost-effectiveness and utility of screening and discarding first-time donations. © 2013 American Association of Blood Banks.

Early Outcomes of the New UK Deceased Donor Kidney Fast-Track Offering Scheme.

PubMed

Callaghan, Chris J; Mumford, Lisa; Pankhurst, Laura; Baker, Richard J; Bradley, J Andrew; Watson, Christopher J E

2017-12-01

The UK Kidney Fast-Track Scheme (KFTS) was introduced in 2012 to identify kidneys at high risk of discard and to rapidly facilitate transplantation. A retrospective analysis of kidneys transplanted through the KFTS was undertaken. UK Transplant Registry data were collected on deceased donor kidneys implanted between November 1, 2012, and April 30, 2015, (donation after brain death [DBD] donors) and March 1, 2013, and April 30, 2015 (donation after circulatory death [DCD] donors). Posttransplant outcomes included 1-year estimated glomerular filtration rate and death-censored graft survival (DCGS). Over the study period, 523 deceased donor kidneys were transplanted through the KFTS and 4174 via the standard National Kidney Allocation Scheme (NKAS). Kidneys in the KFTS were more likely to be from older diabetic donors, had a higher frequency of poor ex vivo perfusion, had longer cold ischemic times, and were transplanted into older recipients. One-year DCGS of KFTS and NKAS DBD donor kidneys was similar (94% vs 95%; P = 0.70), but for DCD donor kidneys, DCGS was lower in those allocated via the KFTS (91% versus 95%; P = 0.04). Median 1-year estimated glomerular filtration rate for DBD donor kidneys was lower in those allocated via the KFTS (49 vs 52 mL/min per 1.73 m; P = 0.01), but for DCD kidneys, there was no difference (45 vs 48 mL/min per 1.73 m; P = 0.10). Although KFTS kidneys have less favorable donor, graft, and recipient risk factors than NKAS kidneys, short-term graft and patient outcomes are acceptable. National schemes that identify and rapidly offer kidneys at high risk of discard may contribute to minimizing the unnecessary discard of organs.

Systematic Evaluation of Industrial, Commercial, and Institutional Food Waste Management Strategies in the United States.

PubMed

Hodge, Keith L; Levis, James W; DeCarolis, Joseph F; Barlaz, Morton A

2016-08-16

New regulations and targets limiting the disposal of food waste have been recently enacted in numerous jurisdictions. This analysis evaluated selected environmental implications of food waste management policies using life-cycle assessment. Scenarios were developed to evaluate management alternatives applicable to the waste discarded at facilities where food waste is a large component of the waste (e.g., restaurants, grocery stores, and food processors). Options considered include anaerobic digestion (AD), aerobic composting, waste-to-energy combustion (WTE), and landfilling, and multiple performance levels were considered for each option. The global warming impact ranged from approximately -350 to -45 kg CO2e Mg(-1) of waste for scenarios using AD, -190 to 62 kg CO2e Mg(-1) for those using composting, -350 to -28 kg CO2e Mg(-1) when all waste was managed by WTE, and -260 to 260 kg CO2e Mg(-1) when all waste was landfilled. Landfill diversion was found to reduce emissions, and diverting food waste from WTE generally increased emissions. The analysis further found that when a 20 year GWP was used instead of a 100 year GWP, every scenario including WTE was preferable to every scenario including landfill. Jurisdictions seeking to enact food waste disposal regulations should consider regional factors and material properties before duplicating existing statutes.

Investigation of Plutonium and Uranium Precipitation Behavior with Gadolinium as a Neutron Poison

DOE Office of Scientific and Technical Information (OSTI.GOV)

Visser, A.E.

2003-07-07

The neutralization of solutions containing significant quantities of fissile material at the Department of Energy's Savannah River Site and the subsequent transfer of the slurry to the High Level Waste (HLW) system is accomplished with the addition of a neutron poison to ensure nuclear safety. Gd, depleted U, Fe, and Mn have been used as poisons in the caustic precipitation of process solutions prior to discarding to HLW. However, the use of Gd is preferred since only small amounts of Gd are necessary for effective criticality control, smaller volumes of metal hydroxides are produced, and the volume of HLW glassmore » resulting from this process is minimized.« less

Dual Use of Packaging on the Moon: Logistics-2-Living

NASA Technical Reports Server (NTRS)

Howe, A. Scott; Howard, Robert

2010-01-01

This paper describes a modular packaging system for logistics that can be reconfigured into internal outfitting for a lunar outpost, including desks, chairs, partitions, cabinets, and radiation shielding. Logistics include clothes, equipment, food, and other consumables needed to sustain the crew for the duration of the mission. A significant mass penalty is required for the packaging and handling of logistics for re-supply of short to long-term space missions that must be brought out of the gravity well on a launch vehicle. Once the supplies have been exhausted, the packaging material is typically of no further use and is discarded. If a scheme can be developed that reuses the logistics packaging, the mass penalty can be reduced. In this research, a modular packaging system has been devised as a kit-of-parts that can be used for both handling logistics supplies, and then reconfigured into desks, chairs, partitions, cabinets, and radiation shielding. The system is derived from a standard International Space Station (ISS)-type Cargo Transfer Bag (CTB), using soft, unfoldable box-like containers with stiff metal inserts. The empty hydrogen-impregnated CTBs can be used as-is for cabinets, opened up for use as partitions, or draped over the habitat as layers of radiation shielding. Stiff metal inserts can be reconfigured into desks and other useful outfitting.

16. CELLAR, UNDER WEST MEETING ROOM, LOOKING SOUTHEAST. Discarded marble ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

16. CELLAR, UNDER WEST MEETING ROOM, LOOKING SOUTHEAST. Discarded marble range top incorporated into a low brick partition. It is possible the range originally stood between the two brick walls beyond to the right. There appears to be a bricked-up fire box opening in the far wall. The fragments of the marble range top have been catalogued into the Architectural Study Collection of Independence National Historical Park. Dimensions recorded in Field Records. - Twelfth Street Meeting House, 20 South Twelfth Street, Philadelphia, Philadelphia County, PA

Admixing dredged marine clay with cement-bentonite for reduction of compressibility

NASA Astrophysics Data System (ADS)

Rahilman, Nur Nazihah Nur; Chan, Chee-Ming

2017-11-01

Cement-based solidification/stabilization is a method that is widely used for the treatment of dredged marine clay. The key objective for solidification/stabilization is to improve the engineering properties of the originally soft, weak material. Dredged materials are normally low in shear strength and bearing capacity while high incompressibility. In order to improve the material's properties for possible reuse, a study on the one-dimensional compressibility of lightly solidified dredged marine clay admixed with bentonite was conducted. On the other hand, due to the viscous nature, particularly the swelling property, bentonite is a popular volumising agent for backfills. In the present study, standard oedometer test was carried out to examine the compressibility of the treated sample. Complementary strength measurements were also conducted with laboratory vane shear setup on both the untreated and treated dredged marine clay. The results showed that at the same binder content, the addition of bentonite contributed significantly to the reduction of compressibility and rise in undrained shear strength. These improved properties made the otherwise discarded dredged marine soils potentially reusable for reclamation works, for instance.

Process simulation and cost analysis for removing inorganics from wood chips using combined mechanical and chemical preprocessing

DOE PAGES

Hu, Hongqiang; Westover, Tyler L.; Cherry, Robert; ...

2016-10-03

Inorganic species (ash) in biomass feedstocks negatively impact thermochemical and biochemical energy conversion processes. In this work, a process simulation model is developed to model the reduction in ash content of loblolly logging residues using a combination of air classification and dilute-acid leaching. Various scenarios are considered, and it is found that costs associated with discarding high-ash material from air classification are substantial. The costs of material loss can be reduced by chemical leaching the high-ash fraction obtained from air classification. The optimal leaching condition is found to be approximately 0.1 wt% sulfuric acid at 24°C. In example scenarios, totalmore » process costs in the range of $10-12/dry tonnes of product are projected that result in a removal of 11, 66, 53 and 86% of organics, total ash (inorganics), alkaline earth metals and phosphorus (AAEMS+P), and silicon, respectively. Here, sensitivity analyses indicate that costs associated with loss of organic material during processing (yield losses), brine disposal, and labor have the greatest potential to impact the total processing cost.« less

Reeling in the textiles at Row Clothing Enterprises

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ridgley, H.

1997-12-01

While a handful of textile processing centers in operation today can date their roots back to the turn of this century or before, Row Clothing Enterprises (Baltimore) first opened its doors in 1985. Soon after, it climbed its way to becoming one of the premier textile processing businesses in the country. And what they want most of all is usable clothing--the discards of American secondhand clothing stores. The company exports 100% of the usable clothing it recovers paying institutions as much as $150 a ton for the material. Graders also sort the material into piles headed for the mutilating, ormore » fiber-shredding, machine. While not all the material is shredded, it does provide more opportunities for resale. Whatever Row cannot resell as clothing--because it is soiled or torn--gets processed into industrial wiping cloths, if it is cotton. Clothing made from wool and polyester is sent to woolen and polyester fiber mills to be made into new clothing. While 80% of Row`s wiper market is domestic, 80% of its fiber market is overseas.« less

Glutathione S-transferase iso-enzymes in perfusate from pumped kidneys are associated with delayed graft function.

PubMed

Hall, I E; Bhangoo, R S; Reese, P P; Doshi, M D; Weng, F L; Hong, K; Lin, H; Han, G; Hasz, R D; Goldstein, M J; Schröppel, B; Parikh, C R

2014-04-01

Accurate and reliable assessment tools are needed in transplantation. The objective of this prospective, multi-center study was to determine the associations of the alpha and pi iso-enzymes of glutathione S-transferase (GST), measured from perfusate solution at the start and end (base and post) of kidney allograft machine perfusion, with subsequent delayed graft function (DGF). We also compared GST iso-enzyme perfusate levels from discarded versus transplanted kidneys. A total of 428 kidneys were linked to outcomes as recorded by the United Network of Organ Sharing. DGF, defined as any dialysis in the first week of transplant, occurred in 141 recipients (32%). Alpha- and pi-GST levels significantly increased during machine perfusion. The adjusted relative risks (95% confidence interval) of DGF with each log-unit increase in base and post pi-GST were 1.14 (1.0-1.3) and 1.36 (1.1-1.8), respectively. Alpha-GST was not independently associated with DGF. There were no significant differences in GST values between discarded and transplanted kidneys, though renal resistance was significantly higher in discarded kidneys. We found pi-GST at the end of machine perfusion to be independently associated with DGF. Further studies should elucidate the utility of GST for identifying injured kidneys with regard to organ allocation, discard and recipient management decisions. © Copyright 2014 The American Society of Transplantation and the American Society of Transplant Surgeons.

Interference Drop Scheme: Enhancing QoS Provision in Multi-Hop Ad Hoc Networks

NASA Astrophysics Data System (ADS)

Luo, Chang-Yi; Komuro, Nobuyoshi; Takahashi, Kiyoshi; Kasai, Hiroyuki; Ueda, Hiromi; Tsuboi, Toshinori

Ad hoc networking uses wireless technologies to construct networks with no physical infrastructure and so are expected to provide instant networking in areas such as disaster recovery sites and inter-vehicle communication. Unlike conventional wired networks services, services in ad hoc networks are easily disrupted by the frequent changes in traffic and topology. Therefore, solutions to assure the Quality of Services (QoS) in ad hoc networks are different from the conventional ones used in wired networks. In this paper, we propose a new queue management scheme, Interference Drop Scheme (IDS) for ad hoc networks. In the conventional queue management approaches such as FIFO (First-in First-out) and RED (Random Early Detection), a queue is usually managed by a queue length limit. FIFO discards packets according to the queue limit, and RED discards packets in an early and random fashion. IDS, on the other hand, manages the queue according to wireless interference time, which increases as the number of contentions in the MAC layer increases. When there are many MAC contentions, IDS discards TCP data packets. By observing the interference time and discarding TCP data packets, our simulation results show that IDS improves TCP performance and reduces QoS violations in UDP in ad hoc networks with chain, grid, and random topologies. Our simulation results also demonstrate that wireless interference time is a better metric than queue length limit for queue management in multi-hop ad hoc networks.

Estimating reef fish discard mortality using surface and bottom tagging: effects of hook injury and barotrauma

USGS Publications Warehouse

Rudershausen, Paul J.; Buckel, Jeffrey A.; Hightower, Joseph E.

2013-01-01

We estimated survival rates of discarded black sea bass (Centropristis striata) in various release conditions using tag–recapture data. Fish were captured with traps and hook and line from waters 29–34 m deep off coastal North Carolina, USA, marked with internal anchor tags, and observed for release condition. Fish tagged on the bottom using SCUBA served as a control group. Relative return rates for trap-caught fish released at the surface versus bottom provided an estimated survival rate of 0.87 (95% credible interval 0.67–1.18) for surface-released fish. Adjusted for results from the underwater tagging experiment, fish with evidence of external barotrauma had a median survival rate of 0.91 (0.69–1.26) compared with 0.36 (0.17–0.67) for fish with hook trauma and 0.16 (0.08–0.30) for floating or presumably dead fish. Applying these condition-specific estimates of survival to non-tagging fishery data, we estimated a discard survival rate of 0.81 (0.62–1.11) for 11 hook and line data sets from waters 20–35 m deep and 0.86 (0.67–1.17) for 10 trap data sets from waters 11–29 m deep. The tag-return approach using a control group with no fishery-associated trauma represents a method to accurately estimate absolute discard survival of physoclistous reef species.

Estimating missed government tax revenue from foreign tobacco: survey of discarded cigarette packs.

PubMed

Wilson, N; Thomson, G; Edwards, R; Peace, J

2009-10-01

To clarify the extent of use of foreign (including duty free, foreign normal retail and smuggled) tobacco, and to estimate missed government tax revenue in a geographically isolated country. Discarded cigarette packs were collected on the streets of four cities and six New Zealand towns/rural locations between November 2008 and January 2009. Out of a total of 1310 packs collected, 42 foreign packs were identified (3.2%, 95% CI 2.4% to 4.3%). Overall, the distribution of packs by country and company was not suggestive of any clustering that might indicate smuggling. At 3.2% of packs being "foreign", the New Zealand government is losing around $36 million per year in tobacco-related tax relative to if all this tobacco was purchased in New Zealand. For various reasons (including that it was not possible to identify packs bought duty free within New Zealand, and other New Zealand survey data indicating duty free product use at 3.8% of packs), the figure reached is probably an underestimate of the true level. The New Zealand government is missing out on revenue that could be used for improving the funding of tobacco control, and smokers are being exposed to cheaper tobacco thus increasing their risk of continuing to smoke. This government and other governments can and should act at the international and national levels to end the sales of duty free tobacco.

[Contamination of human milk with aerobic flora: Evaluation of losses for a human milk bank].

PubMed

Dewitte, C; Courdent, P; Charlet, C; Dumoulin, D; Courcol, R; Pierrat, V

2015-05-01

In France, human milk banks pasteurize milk for the mother's own hospitalized baby (personalized milk) and for donation. There is specific legislation regulating the activity of human milk banks with bacterial screening of donor milk before and after pasteurization. Milk should be tested for Staphylococcus aureus and total aerobic flora. Any sample of milk positive for aerobic flora and/or S. aureus before and/or after pasteurization should be discarded. The real pathogenicity of the total aerobic flora is actually debated as well as the usefulness of systematic postpasteurization screening. The aim of this study was to quantify milk losses related to prepasteurization contamination by total aerobic flora in a regional milk bank, to identify losses due to contamination with S. aureus or aerobic flora, and to analyze differences between centers. This was a prospective observational study conducted in the regional human milk bank of the Nord-Pas-de-Calais area in France. Data were collected from six major centers providing 80% of the milk collected between June 2011 and June 2012. Variables were the volumes of personalized milk collected by each center, volumes of contaminated milk, and the type of bacteria identified. During the study period, the regional human milk bank treated 4715 L (liters) of personalized milk and 508 L (10.8%) were discarded due to bacteriological screening. Among these 508 L, 43% were discarded because of a prepasteurization contamination with aerobic flora, 55% because of a prepasteurization contamination with S. aureus, and 2% because of other pathogenic bacteria. Postpasteurization tests were positive in 25 samples (0.5%). Only five of these 25 samples were positive before pasteurization and in all cases with S. aureus. A total of 218 L were destroyed because of prepasteurization contamination with total aerobic flora, while the postpasteurization culture was sterile. There was a great difference between centers in the percentage of discarded milk and the type of contamination. The percentage of discarded milk varied from 4 to 16% (P<0.001) and the percentage of prepasteurization positive samples with aerobic flora from 0 to 70% (P<0.001). Costing 80 €/L in France, this represented an economic loss of €17,440. A significant volume of milk is discarded because of contamination with total aerobic flora found only in prepasteurization tests. Reassessment of the French regulations with regard to microbiological safety could save human milk to cover the needs of a larger group of preterm babies. Copyright © 2015. Published by Elsevier SAS.

Hoarding in obsessive-compulsive disorder: a report of 20 cases.

PubMed

Winsberg, M E; Cassic, K S; Koran, L M

1999-09-01

We describe the demographic characteristics, hoarding phenomenology, comorbid disorders, family histories, and treatment response of 20 adult obsessive-compulsive disorder (OCD) patients exhibiting hoarding behavior. We utilized the Structured Clinical Interview for DSM-III-R, the Yale-Brown Obsessive Compulsive Scale, and a semistructured interview to gather data. We studied 9 women and 11 men. Their hoarding began from age 5 years to age 46 years (mean +/- SD age at onset = 20 +/- 11 years); hoarding was evident before the onset of other OCD symptoms in 9 patients. The most commonly hoarded items were newspapers and magazines, junk mail, old clothes, notes or lists, and old receipts. Hoarded material occupied from one room plus most or all closets to more than one room plus all closets, the garage, and yard. Seven patients rented additional storage space for hoarded items. Eighty-four percent of patients reported a family history of hoarding, and 80% grew up in a household where someone else hoarded. The most frequent primary motives for hoarding were fears of discarding something useful and discarding something that would be needed in the future. Lifetime prevalence of major depression and of impulse-control disorders, especially compulsive shopping, were high; only 3 patients met DSM-IV criteria for obsessive-compulsive personality disorder. Response of hoarding to selective serotonin reuptake inhibitors was less robust than is expected for obsessive-compulsive disorder. Whether hoarding behaviors mark a subset of obsessive-compulsive disorder patients with a different pathophysiology or functional anatomy deserves investigation.

Distillation of Greenberger-Horne-Zeilinger states by selective information manipulation.

PubMed

Cohen, O; Brun, T A

2000-06-19

Methods for distilling Greenberger-Horne-Zeilinger (GHZ) states from arbitrary entangled tripartite pure states are described. These techniques work for virtually any input state. Each technique has two stages which we call primary and secondary distillations. Primary distillation produces a GHZ state with some probability, so that when applied to an ensemble of systems a certain percentage is discarded. Secondary distillation produces further GHZs from the discarded systems. These protocols are developed with the help of an approach to quantum information theory based on absolutely selective information, which has other potential applications.

Second-hand market as an alternative in reverse logistics

NASA Astrophysics Data System (ADS)

Pochampally, Kishore K.; Gupta, Surendra M.

2004-02-01

Collectors of discarded products seldom know when those products were bought and why they are discarded. Also, the products do not indicate their remaining life periods. So, it is difficult to decide if it is "sensible" to repair (if necessary) a particular product for subsequent sale on the second-hand market or to disassemble it partially or completely for subsequent remanufacture and/or recycle. To this end, we build an expert system using Bayesian updating process and fuzzy set theory, to aid such decision-making. A numerical example demonstrates the building approach.

Communication: An efficient and accurate perturbative correction to initiator full configuration interaction quantum Monte Carlo

NASA Astrophysics Data System (ADS)

Blunt, Nick S.

2018-06-01

We present a perturbative correction within initiator full configuration interaction quantum Monte Carlo (i-FCIQMC). In the existing i-FCIQMC algorithm, a significant number of spawned walkers are discarded due to the initiator criteria. Here we show that these discarded walkers have a form that allows the calculation of a second-order Epstein-Nesbet correction, which may be accumulated in a trivial and inexpensive manner, yet substantially improves i-FCIQMC results. The correction is applied to the Hubbard model and the uniform electron gas and molecular systems.

Severe hypertriglyceridemia in Puerto Rico blood donors: a population study 2009-2011.

PubMed

Morales-Borges, Raúl H; Merced, Carmen

2012-01-01

Puerto Rico blood donor issues has been identified in cases of severe hypertriglyceridemia presenting as turbid. Blood donations resulting in milky serum must be discarded. They are discarded because we cannot properly test the donation. This is the first report where we correlate turbidity and cardiovascular risk factors in the Puerto Rico population as well as blood types O and A, Rh (+) with dyslipidemia. Blood donors should be screened in more details regarding cardiovascular and metabolic risks to avoid problems with recruitment and retention strategies.

Thermal and catalytic coprocessing of coal and waste materials

DOE Office of Scientific and Technical Information (OSTI.GOV)

Orr, E.C.; Tuntawiroon, W.; Ding, W.B.

1995-12-31

Coprocessing of coal with waste materials to produce liquid fuels with emphasis on finding reasonable reaction pathways and catalysts for such processing is presently the subject of intensive investigation. Polymer wastes such as polyethylene, polystyrene, polypropylene and used rubber tires are not naturally degraded over time. More than 22 million tons of plastic waste are annually discarded in landfills and over 75 percent of used rubber tires are similarly treated. In order to obtain distillate liquids or petroleum compatible refined products from coal, addition of hydrogen is necessary. A possible method for hydrogen addition is coprocessing of coal with polymericmore » waste materials since these latter materials contain hydrogen at levels much higher than are found in coal. The breakdown of waste rubber tires is interesting because the liquids derived may prove to be important as a coal dissolution and/or hydrogen donor solvent. Recently, Badger and coworkers reported that hydrogenated tire oils (hydrogenated in the presence of CoMo catalyst) were effective for the dissolution of coal. Studies on the coprocessing of coal and waste materials have only recently been done intensively. Limited data are available on reaction conditions and catalytic effects for processing coal mixed with post-consumer wastes. The purpose of the present study was to determine the effects of reaction temperature, pressure, catalysts, and mixture ratio on the coprocessing of coal and waste materials.« less

Recycling cycle of materials applied to acrylonitrile-butadiene-styrene/policarbonate blends with styrene-butadiene-styrene copolymer addition

NASA Astrophysics Data System (ADS)

Cândido, L. H. A.; Ferreira, D. B.; Júnior, W. Kindlein; Demori, R.; Mauler, R. S.

2014-05-01

The scope of this research is the recycling of polymers from mobile phones hulls discarded and the performance evaluation when they are submitted to the Recycling Cycle of Materials (RCM). The studied material was the ABS/PC blend in a 70/30 proportion. Different compositions were evaluated adding virgin material, recycled material and using the copolymer SBS as impact modifier. In order to evaluate the properties of material's composition, the samples were characterized by TGA, FTIR, SEM, IZOD impact strength and tensile strength tests. At the first stage, the presented results suggest the composition containing 25% of recycled material and 5% of SBS combines good mechanical performance to the higher content of recycled material and lower content of impact modifier providing major benefits to recycling plans. Five cycles (RCM) were applied in the second stage; they evidenced a decrease trend considering the impact strength. At first and second cycle the impact strength was higher than reference material (ABS/PC blend) and from the fourth cycle it was lower. The superiority impact strength in the first and second cycles can be attributed to impact modifier effect. The thermal tests and the spectrometry didn't show the presence of degradation process in the material and the TGA curves demonstrated the process stability. The impact surface of each sample was observed at SEM. The microstructures are not homogeneous presenting voids and lamellar appearance, although the outer surface presents no defects, demonstrating good moldability. The present work aims to assess the life cycle of the material from the successive recycling processes.

Household hazardous waste in municipal landfills: contaminants in leachate.

PubMed

Slack, R J; Gronow, J R; Voulvoulis, N

2005-01-20

Household hazardous waste (HHW) includes waste from a number of household products such as paint, garden pesticides, pharmaceuticals, photographic chemicals, certain detergents, personal care products, fluorescent tubes, waste oil, heavy metal-containing batteries, wood treated with dangerous substances, waste electronic and electrical equipment and discarded CFC-containing equipment. Data on the amounts of HHW discarded are very limited and are hampered by insufficient definitions of what constitutes HHW. Consequently, the risks associated with the disposal of HHW to landfill have not been fully elucidated. This work has focused on the assessment of data concerning the presence of hazardous chemicals in leachates as evidence of the disposal of HHW in municipal landfills. Evidence is sought from a number of sources on the occurrence in landfill leachates of hazardous components (heavy metals and xenobiotic organic compounds [XOC]) from household products and the possible disposal-to-emissions pathways occurring within landfills. This review demonstrates that a broad range of xenobiotic compounds occurring in leachate can be linked to HHW but further work is required to assess whether such compounds pose a risk to the environment and human health as a result of leakage/seepage or through treatment and discharge.

Export of electronics equipment waste.

PubMed

LaDou, Joseph; Lovegrove, Sandra

2008-01-01

Electronics equipment waste ("e-waste") includes discarded computers, computer monitors, television sets, and cell phones. Less than 10% of e-waste is currently recycled. The United States and other developed countries export e-waste primarily to Asia, knowing it carries a real harm to the poor communities where it will be discarded. A 2006 directive bans the use of lead, mercury, cadmium, hexavalent chromium, and certain brominated flame retardants in most electronics products sold in the EU. A similar directive facilitates the development and design of clean electronics products with longer lifespans that are safe and easy to repair, upgrade, and recycle, and will not expose workers and the environment to hazardous chemicals. These useful approaches apply only regionally and cover only a fraction of the hazardous substances used in electronics manufacture, however. There is an urgent need for manufacturers of electronics products to take responsibility for their products from production to end-of-life, and for much tighter controls both on the transboundary movement of e-waste and on the manner in which it is recycled. Manufacturers must develop clean products with longer lifespans that are safe and easy to repair, upgrade, and recycle and will not expose workers and the environment to hazardous chemicals.

The intended and unintended consequences of a legal measure to cut the flow of illegal cigarettes into New York City: the case of the South Bronx.

PubMed

Kurti, Marin; von Lampe, Klaus; Johnson, Jacqueline

2015-04-01

We examined the impact of a change in New York tax law on the numbers of untaxed cigarettes bootlegged from Native American reservations and resold in the South Bronx. Discarded cigarette packs were systematically collected in 30 randomized South Bronx census tracks before and after the amended tax law went into effect in 2011. Also, administrative data were gathered on the number of taxed cigarettes sold in New York State, including sales to Native American reservations. Before the tax amendment, 42% of discarded cigarette packs collected in the South Bronx had no tax stamp. After the tax law went into effect, the percentage of cigarette packs without tax stamps declined to 6.2%. Simultaneously, the percentage of packs with out-of-state tax stamps rose from 18.3% to 66.3%. The percentage of packs with a combined New York State and New York City tax stamp did not change after the tax amendment. After the tax amendment, the supply of contraband cigarettes appears to have quickly shifted from one lower-priced jurisdiction to another without a change in the overall prevalence of contraband cigarettes.

Development of high temperature transport technology for LiCl-KCl eutectic salt in pyroprocessing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lee, Sung Ho; Lee, Hansoo; Kim, In Tae

The development of high-temperature transport technologies for molten salt is a prerequisite and a key issue in the industrialization of pyro-reprocessing for advanced fuel cycle scenarios. The solution of a molten salt centrifugal pump was discarded because of the high corrosion power of a high temperature molten salt, so the suction pump solution was selected. An apparatus for salt transport experiments by suction was designed and tested using LiC-KCl eutectic salt. The experimental results of lab-scale molten salt transport by suction showed a 99.5% transport rate (ratio of transported salt to total salt) under a vacuum range of 100 mtorrmore » - 10 torr at 500 Celsius degrees. The suction system has been integrated to the PRIDE (pyroprocessing integrated inactive demonstration) facility that is a demonstrator using non-irradiated materials (natural uranium and surrogate materials). The performance of the suction pump for the transport of molten salts has been confirmed.« less

Analysis of Physical Properties and Mineralogical of Pyrolysis Tires Rubber Ash Compared Natural Sand in Concrete material

NASA Astrophysics Data System (ADS)

Syamir Senin, Mohamad; Shahidan, Shahiron; Syazani Leman, Alif; Izzati Raihan Ramzi Hannan, Nurul

2016-11-01

Waste tires pose significant health and environmental concerns if not recycled or discarded properly. At the same time, natural sand is becoming scarcer and costlier due to its non-availability. Waste tires as fine aggregate can be an economical and sustainable alternative to the natural sand. Recent years, the interest on recycling waste tires into civil engineering applications by the researchers has increased. In this research, the chemical and physical properties of the tires rubber ash and the natural sand have been analysed. The densities of the rubber ash are lower than the natural sand. Rubber ash had finer particle size compared to the natural sand. Almost all chemical in the natural sand had in rubber ash with the additional sulphur trioxide and zinc oxide in the rubber ash, made the rubber ash better than natural sand. Rubber ash seems to be a suitable material to use in concrete as sand replacement.

Numerical and analytical approaches to an advection-diffusion problem at small Reynolds number and large Péclet number

NASA Astrophysics Data System (ADS)

Fuller, Nathaniel J.; Licata, Nicholas A.

2018-05-01

Obtaining a detailed understanding of the physical interactions between a cell and its environment often requires information about the flow of fluid surrounding the cell. Cells must be able to effectively absorb and discard material in order to survive. Strategies for nutrient acquisition and toxin disposal, which have been evolutionarily selected for their efficacy, should reflect knowledge of the physics underlying this mass transport problem. Motivated by these considerations, in this paper we discuss the results from an undergraduate research project on the advection-diffusion equation at small Reynolds number and large Péclet number. In particular, we consider the problem of mass transport for a Stokesian spherical swimmer. We approach the problem numerically and analytically through a rescaling of the concentration boundary layer. A biophysically motivated first-passage problem for the absorption of material by the swimming cell demonstrates quantitative agreement between the numerical and analytical approaches. We conclude by discussing the connections between our results and the design of smart toxin disposal systems.

Determination of as-discarded methane potential in residential and commercial municipal solid waste.

PubMed

Chickering, Giles W; Krause, Max J; Townsend, Timothy G

2018-06-01

Methane generation potential, L 0 , is a primary parameter of the first-order decay (FOD) model used for prediction and regulation of landfill gas (LFG) generation in municipal solid waste (MSW) landfills. The current US EPA AP-42 default value for L 0 , which has been in place for almost 20 years, is 100 m 3 CH 4 /Mg MSW as-discarded. Recent research suggests the yield of landfilled waste could be less than 60 m 3 CH 4 /Mg MSW. This study aimed to measure the L 0 of present-day residential and commercial as-discarded MSW. In doing so, 39 waste collection vehicles were sorted for composition before samples of each biodegradable fraction were analyzed for methane generation potential. Methane yields were determined for over 450 samples of 14 different biodegradable MSW fractions, later to be combined with moisture content and volatile solids data to calculate L 0 values for each waste load. An average value of 80 m 3 CH 4 /Mg MSW was determined for all samples with 95% of values in the interval 74-86 m 3 CH 4 /Mg MSW as-discarded. While no statistically significant difference was observed, commercial MSW yields (mean 85, median 88 m 3 CH 4 /Mg MSW) showed a higher average L 0 than residential MSW (mean 75, median 71 m 3 CH 4 /Mg MSW). Many methane potential values for individual fractions described in previous work were found within the range of values determined by BMP in this study. Copyright © 2018 Elsevier Ltd. All rights reserved.

Hoarding and emotional reactivity: the link between negative emotional reactions and hoarding symptomatology.

PubMed

Shaw, A M; Timpano, K R; Steketee, G; Tolin, D F; Frost, R O

2015-04-01

Hoarding disorder (HD) is characterized by difficulty discarding, clutter, and frequently excessive acquiring. Theories have pointed to intense negative emotional reactions (e.g., sadness) as one factor that may play a critical role in HD's etiology. Preliminary work with an analogue sample indicated that more intense negative emotions following emotional films were linked with greater hoarding symptoms. Symptom provocation imaging studies with HD patients have also found evidence for excessive activation in brain regions implicated in processing emotions. The current study utilized a sample with self-reported serious hoarding difficulties to examine how hoarding symptoms related to both general and hoarding-related emotional reactivity, taking into account the specificity of these relationships. We also examined how two cognitive factors, fear of decision-making and confidence in memory, modified this relationship. 628 participants with self-identified hoarding difficulties completed questionnaires about general emotional reactivity, depression, anxiety, decision-making, and confidence in memory. To assess hoarding-related emotional reactivity, participants reported their emotional reactions when imagining discarding various items. Heightened general emotional reactivity and more intense emotional reactions to imagined discarding were associated with both difficulty discarding and acquisition, but not clutter, controlling for age, gender, and co-occurring mood and anxiety symptoms. Fear of decision-making and confidence in memory interacted with general emotional reactivity to predict hoarding symptoms. These findings provide support for cognitive-behavioral models of hoarding. Experimental research should be conducted to discover whether emotional reactivity increases vulnerability for HD. Future work should also examine whether emotional reactivity should be targeted in interventions for hoarding. Copyright © 2015 Elsevier Ltd. All rights reserved.

Hoarding and emotional reactivity: The link between negative emotional reactions and hoarding symptomatology

PubMed Central

Shaw, A.M.; Timpano, K.R.; Steketee, G.; Tolin, D. F.; Frost, R.O.

2015-01-01

Hoarding disorder (HD) is characterized by difficulty discarding, clutter, and frequently excessive acquiring. Theories have pointed to intense negative emotional reactions (e.g., sadness) as one factor that may play a critical role in HD’s etiology. Preliminary work with an analogue sample indicated that more intense negative emotions following emotional films were linked with greater hoarding symptoms. Symptom provocation imaging studies with HD patients have also found evidence for excessive activation in brain regions implicated in processing emotions. The current study utilized a sample with self-reported serious hoarding difficulties to examine how hoarding symptoms related to both general and hoarding-related emotional reactivity, taking into account the specificity of these relationships. We also examined how two cognitive factors, fear of decision-making and confidence in memory, modified this relationship. 628 participants with self-identified hoarding difficulties completed questionnaires about general emotional reactivity, depression, anxiety, decision-making, and confidence in memory. To assess hoarding-related emotional reactivity, participants reported their emotional reactions when imagining discarding various items. Heightened general emotional reactivity and more intense emotional reactions to imagined discarding were associated with both difficulty discarding and acquisition, but not clutter, controlling for age, gender, and co-occurring mood and anxiety symptoms. Fear of decision-making and confidence in memory interacted with general emotional reactivity to predict hoarding symptoms. These findings provide support for cognitive-behavioral models of hoarding. Experimental research should be conducted to discover whether emotional reactivity increases vulnerability for HD. Future work should also examine whether emotional reactivity should be targeted in interventions for hoarding. PMID:25732668

Environmental Correlates of Abundances of Mosquito Species and Stages in Discarded Vehicle Tires

PubMed Central

YEE, DONALD A.; KNEITEL, JAMIE M.; JULIANO, STEVEN A.

2012-01-01

Discarded vehicle tires are a common habitat for container mosquito larvae, although the environmental factors that may control their presence or abundance within a tire are largely unknown. We sampled discarded vehicle tires in six sites located within four counties of central Illinois during the spring and summer of 2006 to determine associations between a suite of environmental factors and community composition of container mosquitoes. Our goal was to find patterns of association between environmental factors and abundances of early and late instars. We hypothesized that environmental factors correlated with early instars would be indicative of oviposition cues, whereas environmental factors correlated with late instars would be those important for larval survival. We collected 13 species of mosquitoes, with six species (Culex restuans, Cx. pipiens, Aedes albopictus, Cx. salinarius, Ae. atropalpus, and Ae. triseriatus) accounting for ≈95% of all larvae. There were similar associations between congenerics and environmental factors, with Aedes associated with detritus type (fine detritus, leaves, seeds) and Culex associated with factors related to the surrounding habitat (human population density, canopy cover, tire size) or microorganisms (bacteria, protozoans). Although there was some consistency in factors that were important for early and late instar abundance, there were few significant associations between early and late instars for individual species. Lack of correspondence between factors that explain variation in early versus late instars, most notable for Culex, suggests a difference between environmental determinants of oviposition and survival within tires. Environmental factors associated with discarded tires are important for accurate predictions of mosquito occurrence at the generic level. PMID:20180308

Control of aedes vectors of dengue in three provinces of Vietnam by use of Mesocyclops (Copepoda) and community-based methods validated by entomologic, clinical, and serological surveillance.

PubMed

Kay, Brian H; Nam, Vu Sinh; Tien, Tran Van; Yen, Nguyen Thi; Phong, Tran Vu; Diep, Vu Thi Bich; Ninh, Truong Uyen; Bektas, Ahmet; Aaskov, John G

2002-01-01

We describe remarkable success in controlling dengue vectors, Aedes aegypti (L.) and Aedes albopictus (Skuse), in 6 communes with 11,675 households and 49,647 people in the northern provinces of Haiphong, Hung Yen, and Nam Dinh in Vietnam. The communes were selected for high-frequency use of large outdoor concrete tanks and wells. These were found to be the source of 49.6-98.4% of Ae. aegypti larvae, which were amenable to treatment with local Mesocyclops, mainly M. woutersi Van der Velde, M. aspericornis (Daday) and M. thermocyclopoides Harada. Knowledge, attitude, and practice surveys were performed to determine whether the communities viewed dengue and dengue hemorrhagic fever as a serious health threat; to determine their knowledge of the etiology, attitudes, and practices regarding control methods including Mesocyclops; and to determine their receptivity to various information methods. On the basis of the knowledge, attitude, and practice data, the community-based dengue control program comprised a system of local leaders, health volunteer teachers, and schoolchildren, supported by health professionals. Recycling of discards for economic gain was enhanced, where appropriate, and this, plus 37 clean-up campaigns, removed small containers unsuitable for Mesocyclops treatment. A previously successful eradication at Phan Boi village (Hung Yen province) was extended to 7 other villages forming Di Su commune (1,750 households) in the current study. Complete control was also achieved in Nghia Hiep (Hung Yen province) and in Xuan Phong (Nam Dinh province); control efficacy was > or = 99.7% in the other 3 communes (Lac Vien in Haiphong, Nghia Dong, and Xuan Kien in Nam Dinh). Although tanks and wells were the key container types of Ae. aegypti productivity, discarded materials were the source of 51% of the standing crop of Ae. albopictus. Aedes albopictus larvae were eliminated from the 3 Nam Dinh communes, and 86-98% control was achieved in the other 3 communes. Variable dengue attack rates made the clinical and serological comparison of control and untreated communes problematic, but these data indicate that clinical surveillance by itself is inadequate to monitor dengue transmission.

Halogenated compounds from marine algae.

PubMed

Cabrita, Maria Teresa; Vale, Carlos; Rauter, Amélia Pilar

2010-08-09

Marine algae produce a cocktail of halogenated metabolites with potential commercial value. Structures exhibited by these compounds go from acyclic entities with a linear chain to complex polycyclic molecules. Their medical and pharmaceutical application has been investigated for a few decades, however other properties, such as antifouling, are not to be discarded. Many compounds were discovered in the last years, although the need for new drugs keeps this field open as many algal species are poorly screened. The ecological role of marine algal halogenated metabolites has somehow been overlooked. This new research field will provide valuable and novel insight into the marine ecosystem dynamics as well as a new approach to comprehending biodiversity. Furthermore, understanding interactions between halogenated compound production by algae and the environment, including anthropogenic or global climate changes, is a challenging target for the coming years. Research of halogenated metabolites has been more focused on macroalgae than on phytoplankton. However, phytoplankton could be a very promising material since it is the base of the marine food chain with quick adaptation to environmental changes, which undoubtedly has consequences on secondary metabolism. This paper reviews recent progress on this field and presents trends on the role of marine algae as producers of halogenated compounds.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pickerill, Heath

The purpose of the project was to build a competitive solar-powered house for the U.S. Department of Energy Solar Decathlon 2015 held in Irvine, California. The house, named the Nest Home, was an innovative design that works with the environment to meet the needs of the occupants, identified as a growing family. Reused materials were instrumental in the design. Three refurbished shipping containers composed the primary structure of the house, creating an open floor plan that defies common architecture for container homes. The exterior siding was made of deconstructed shipping pallets collected locally. Other recycled products included carpet composed ofmore » discarded fishing nets, denim batting made of recycled blue jeans that outperform traditional fiberglass insulation in sound proofing and thermal resistance, and kitchen cabinets that were purchased used and refinished. Collectively these elements formed a well-balanced blend of modern design, comfort, and sustainability. The house was Missouri University of Science and Technology’s sixth entry in the DOE Solar Decathlon. Missouri S&T has been invited to compete in six of the seven decathlons held, more than any other university worldwide. The house was brought back to Rolla after the Decathlon in California where it has been placed in its permanent location on the S&T campus.« less

Halogenated Compounds from Marine Algae

PubMed Central

Cabrita, Maria Teresa; Vale, Carlos; Rauter, Amélia Pilar

2010-01-01

Marine algae produce a cocktail of halogenated metabolites with potential commercial value. Structures exhibited by these compounds go from acyclic entities with a linear chain to complex polycyclic molecules. Their medical and pharmaceutical application has been investigated for a few decades, however other properties, such as antifouling, are not to be discarded. Many compounds were discovered in the last years, although the need for new drugs keeps this field open as many algal species are poorly screened. The ecological role of marine algal halogenated metabolites has somehow been overlooked. This new research field will provide valuable and novel insight into the marine ecosystem dynamics as well as a new approach to comprehending biodiversity. Furthermore, understanding interactions between halogenated compound production by algae and the environment, including anthropogenic or global climate changes, is a challenging target for the coming years. Research of halogenated metabolites has been more focused on macroalgae than on phytoplankton. However, phytoplankton could be a very promising material since it is the base of the marine food chain with quick adaptation to environmental changes, which undoubtedly has consequences on secondary metabolism. This paper reviews recent progress on this field and presents trends on the role of marine algae as producers of halogenated compounds. PMID:20948909

Culture and cognition in the Acheulian industry: a case study from Gesher Benot Yaʿaqov

PubMed Central

Goren-Inbar, Naama

2011-01-01

The Acheulian presence in the Dead Sea Rift and its environs is characterized by the discontinuity of its cultural manifestations. Nevertheless, the long stratigraphic sequences of the Acheulian Technocomplex provide a unique opportunity for synergetic examination along a temporal trajectory. Hominin cognitive and cultural behaviour are studied at Gesher Benot Yaʿaqov through analyses of lithic, palaeontological and palaeobotanical assemblages, as well as the Early–Middle Pleistocene environment, ecology and climate. The study attempts to reconstruct reduction sequences of some major artefact groups at the site, which include raw material acquisition, production, technology, typology, usage and discard. Experimental archaeology illustrates artefact mobility on the palaeo-landscape. Strategies of biomass-exploitation are studied in detail, with other aspects yielding additional information on hominin subsistence and adaptive responses to their environment. The cultural marker of fire and the spatial association of selected categories of finds are integrated in the general synthesis, allowing reconstruction of the cultural and cognitive realm of Acheulian hominins. The synthesis attempts to reassess the abilities, social structure, subsistence and adaptability to the changing environment of hominins in the Levantine Corridor. PMID:21357226

Chemical compositions and sources of organic matter in fine particles of soils and sands from the vicinity of Kuwait city.

PubMed

Rushdi, Ahmed I; Al-Zarban, Sheikha; Simoneit, Bernd R T

2006-09-01

Fine particles in the atmosphere from soil and sand resuspension contain a variety of organic compounds from natural biogenic and anthropogenic matter. Soil and sand samples from various sites near Kuwait city were collected, sieved to retain the fine particles, and extracted with a mixture of dichloromethane and methanol. The extracts were derivatized and analyzed by gas chromatography-mass spectrometry in order to characterize the chemical compositions and sources of the organic components. The major inputs of organic compounds were from both natural biogenic and anthropogenic sources in these samples. Vegetation was the major natural source of organic compounds and included n-alkanols, n-alkanoic acids, n-alkanes, sterols and triterpenoids. Saccharides had high concentrations (31-43%) in the sand dune and seafront samples, indicating sources from decomposed vegation materials and/or the presence of viable microbiota such as bacteria and fungi. Vehicular emission products, leakage of lubricating oils, discarded plastics and emissions from cooking operations were the major anthropogenic inputs in the samples from the urban areas. This input was mainly UCM, n-alkanes, hopanes, plasticizers and cholesterol, respectively.

Combating oil spill problem using plastic waste

DOE Office of Scientific and Technical Information (OSTI.GOV)

Saleem, Junaid, E-mail: junaidupm@gmail.com; Ning, Chao; Barford, John

Highlights: • Up-cycling one type of pollution i.e. plastic waste and successfully using it to combat the other type of pollution i.e. oil spill. • Synthesized oil sorbent that has extremely high oil uptake of 90 g/g after prolonged dripping of 1 h. • Synthesized porous oil sorbent film which not only facilitates in oil sorption but also increases the affinity between sorbent and oil by means of adhesion. - Abstract: Thermoplastic polymers (such as polypropylene, polyethylene, polyethylene terephthalate (PET) and high density polyethylene (HDPE)) constitute 5–15% of municipal solid waste produced across the world. A huge quantity of plasticmore » waste is disposed of each year and is mostly either discarded in landfills or incinerated. On the other hand, the usage of synthetic polymers as oil sorbents, in particular, polyolefins, including polypropylene (PP), and polyethylene (PE) are the most commonly used oil sorbent materials mainly due to their low cost. However, they possess relatively low oil absorption capacities. In this work, we provide an innovative way to produce a value-added product such as oil-sorbent film with high practical oil uptake values in terms of g/g from waste HDPE bottles for rapid oil spill remedy.« less

Discarded seeds from red pepper (Capsicum annum) processing industry as a sustainable source of high added-value compounds and edible oil.

PubMed

Azabou, Samia; Taheur, Fadia Ben; Jridi, Mourad; Bouaziz, Mohamed; Nasri, Moncef

2017-10-01

The chemical composition and the antioxidant properties of Capsicum annum discarded seeds from processing industry with their corresponding extracted oil were investigated. C. annum seeds had high levels of crude proteins (18.30%), crude oil (11.04%), and dietary fibers (60.96%). The lipophilic fraction of C. annum seeds showed higher radical scavenging activity compared to their hydrophilic fraction, while this latter exhibited the highest reducing power. The results of fatty acid composition showed that fatty acids present in C. annum seed oil were mainly polyunsaturated (84.23%), with linoleic acid being the major polyunsaturated fatty acid (70.93%). The major monounsaturated fatty acid was oleic acid (12.18%), while the main saturated fatty acid was palmitic acid (11.90%). C. annum seed oil showed high absorbance in the UV-B, UV-A, and visible ranges. Owing to their composition, C. annum seeds discarded from pepper processing industry as by-product could be potentially used as high added-value ingredients in some food or nutraceutical formulations because they are well endowed with essential nutriments required for human health.

Two-way QKD with single-photon-added coherent states

NASA Astrophysics Data System (ADS)

Miranda, Mario; Mundarain, Douglas

2017-12-01

In this work we present a two-way quantum key distribution (QKD) scheme that uses single-photon-added coherent states and displacement operations. The first party randomly sends coherent states (CS) or single-photon-added coherent states (SPACS) to the second party. The latter sends back the same state it received. Both parties decide which kind of states they are receiving by detecting or not a photon on the received signal after displacement operations. The first party must determine whether its sent and received states are equal; otherwise, the case must be discarded. We are going to show that an eavesdropper provided with a beam splitter gets the same information in any of the non-discarded cases. The key can be obtained by assigning 0 to CS and 1 to SPACS in the non-discarded cases. This protocol guarantees keys' security in the presence of a beam splitter attack even for states with a high number of photons in the sent signal. It also works in a lossy quantum channel, becoming a good bet for improving long-distance QKD.

Position-specific automated processing of V3 env ultra-deep pyrosequencing data for predicting HIV-1 tropism

PubMed Central

Jeanne, Nicolas; Saliou, Adrien; Carcenac, Romain; Lefebvre, Caroline; Dubois, Martine; Cazabat, Michelle; Nicot, Florence; Loiseau, Claire; Raymond, Stéphanie; Izopet, Jacques; Delobel, Pierre

2015-01-01

HIV-1 coreceptor usage must be accurately determined before starting CCR5 antagonist-based treatment as the presence of undetected minor CXCR4-using variants can cause subsequent virological failure. Ultra-deep pyrosequencing of HIV-1 V3 env allows to detect low levels of CXCR4-using variants that current genotypic approaches miss. However, the computation of the mass of sequence data and the need to identify true minor variants while excluding artifactual sequences generated during amplification and ultra-deep pyrosequencing is rate-limiting. Arbitrary fixed cut-offs below which minor variants are discarded are currently used but the errors generated during ultra-deep pyrosequencing are sequence-dependant rather than random. We have developed an automated processing of HIV-1 V3 env ultra-deep pyrosequencing data that uses biological filters to discard artifactual or non-functional V3 sequences followed by statistical filters to determine position-specific sensitivity thresholds, rather than arbitrary fixed cut-offs. It allows to retain authentic sequences with point mutations at V3 positions of interest and discard artifactual ones with accurate sensitivity thresholds. PMID:26585833

Position-specific automated processing of V3 env ultra-deep pyrosequencing data for predicting HIV-1 tropism.

PubMed

Jeanne, Nicolas; Saliou, Adrien; Carcenac, Romain; Lefebvre, Caroline; Dubois, Martine; Cazabat, Michelle; Nicot, Florence; Loiseau, Claire; Raymond, Stéphanie; Izopet, Jacques; Delobel, Pierre

2015-11-20

HIV-1 coreceptor usage must be accurately determined before starting CCR5 antagonist-based treatment as the presence of undetected minor CXCR4-using variants can cause subsequent virological failure. Ultra-deep pyrosequencing of HIV-1 V3 env allows to detect low levels of CXCR4-using variants that current genotypic approaches miss. However, the computation of the mass of sequence data and the need to identify true minor variants while excluding artifactual sequences generated during amplification and ultra-deep pyrosequencing is rate-limiting. Arbitrary fixed cut-offs below which minor variants are discarded are currently used but the errors generated during ultra-deep pyrosequencing are sequence-dependant rather than random. We have developed an automated processing of HIV-1 V3 env ultra-deep pyrosequencing data that uses biological filters to discard artifactual or non-functional V3 sequences followed by statistical filters to determine position-specific sensitivity thresholds, rather than arbitrary fixed cut-offs. It allows to retain authentic sequences with point mutations at V3 positions of interest and discard artifactual ones with accurate sensitivity thresholds.

Kelp Gulls (Larus dominicanus) killed and injured by discarded monofilament lines at a marine recreational fishery in northern Patagonia.

PubMed

Yorio, Pablo; Marinao, Cristian; Suárez, Nicolás

2014-08-15

Among marine debris, monofilament fishing lines often result in negative impacts on marine organisms. We characterized marine debris and incidence of lost and discarded monofilament lines along beaches used by recreational fishers, and report the impact of lines on Kelp Gulls (Larus dominicanus) at the Bahía San Blas protected area, site of one of the main shore-based recreational fisheries of the southwestern Atlantic. Over 55% of the marine debris recorded originated from recreational fishing activities. Balls of tangled monofilament lines were found at a rate of 40.5 items per km. A total of 27 adult Kelp Gulls were found entangled with monofilament. All individuals were tangled to vegetation within colony boundaries. Four of the gulls had a monofilament line protruding from the bill, showing that they may be also killed when trying to obtain bait. Our results indicate that lost or discarded monofilament lines in the Bahía San Blas recreational fishing area result in undesired impacts on coastal wildlife. Copyright © 2014 Elsevier Ltd. All rights reserved.

Vomeronasal inputs to the rodent ventral striatum.

PubMed

Ubeda-Bañon, I; Novejarque, A; Mohedano-Moriano, A; Pro-Sistiaga, P; Insausti, R; Martinez-Garcia, F; Lanuza, E; Martinez-Marcos, A

2008-03-18

Vertebrates sense chemical signals through the olfactory and vomeronasal systems. In squamate reptiles, which possess the largest vomeronasal system of all vertebrates, the accessory olfactory bulb projects to the nucleus sphericus, which in turn projects to a portion of the ventral striatum known as olfactostriatum. Characteristically, the olfactostriatum is innervated by neuropeptide Y, tyrosine hydroxylase and serotonin immunoreactive fibers. In this study, the possibility that a structure similar to the reptilian olfactostriatum might be present in the mammalian brain has been investigated. Injections of dextran-amines have been aimed at the posteromedial cortical amygdaloid nucleus (the putative mammalian homologue of the reptilian nucleus sphericus) of rats and mice. The resulting anterograde labeling includes the olfactory tubercle, the islands of Calleja and sparse terminal fields in the shell of the nucleus accumbens and ventral pallidum. This projection has been confirmed by injections of retrograde tracers into the ventral striato-pallidum that render retrograde labeling in the posteromedial cortical amygdaloid nucleus. The analysis of the distribution of neuropeptide Y, tyrosine hydroxylase, serotonin and substance P in the ventral striato-pallidum of rats, and the anterograde tracing of the vomeronasal amygdaloid input in the same material confirm that, similar to reptiles, the ventral striatum of mammals includes a specialized vomeronasal structure (olfactory tubercle and islands of Calleja) displaying dense neuropeptide Y-, tyrosine hydroxylase- and serotonin-immunoreactive innervations. The possibility that parts of the accumbens shell and/or ventral pallidum could be included in the mammalian olfactostriatum cannot be discarded.

Recovery of valuable materials from waste liquid crystal display panel.

PubMed

Li, Jinhui; Gao, Song; Duan, Huabo; Liu, Lili

2009-07-01

Associated with the rapid development of the information and electronic industry, liquid crystal displays (LCDs) have been increasingly sold as displays. However, during the discarding at their end-of-life stage, significant environmental hazards, impacts on health and a loss of resources may occur, if the scraps are not managed in an appropriate way. In order to improve the efficiency of the recovery of valuable materials from waste LCDs panel in an environmentally sound manner, this study presents a combined recycling technology process on the basis of manual dismantling and chemical treatment of LCDs. Three key processes of this technology have been studied, including the separation of LCD polarizing film by thermal shock method the removal of liquid crystals between the glass substrates by the ultrasonic cleaning, and the recovery of indium metal from glass by dissolution. The results show that valuable materials (e.g. indium) and harmful substances (e.g. liquid crystals) could be efficiently recovered or separated through above-mentioned combined technology. The optimal conditions are: (1) the peak temperature of thermal shock to separate polarizing film, ranges from 230 to 240 degrees C, where pyrolysis could be avoided; (2) the ultrasonic-assisted cleaning was most efficient at a frequency of 40 KHz (P = 40 W) and the exposure of the substrate to industrial detergents for 10 min; and (3) indium separation from glass in a mix of concentrated hydrochloric acid at 38% and nitric acid at 69% (HCl:HNO(3):H(2)O = 45:5:50, volume ratio). The indium separation process was conducted with an exposure time of 30 min at a constant temperature of 60 degrees C.

The management challenge for household waste in emerging economies like Brazil: realistic source separation and activation of reverse logistics.

PubMed

Fehr, M

2014-09-01

Business opportunities in the household waste sector in emerging economies still evolve around the activities of bulk collection and tipping with an open material balance. This research, conducted in Brazil, pursued the objective of shifting opportunities from tipping to reverse logistics in order to close the balance. To do this, it illustrated how specific knowledge of sorted waste composition and reverse logistics operations can be used to determine realistic temporal and quantitative landfill diversion targets in an emerging economy context. Experimentation constructed and confirmed the recycling trilogy that consists of source separation, collection infrastructure and reverse logistics. The study on source separation demonstrated the vital difference between raw and sorted waste compositions. Raw waste contained 70% biodegradable and 30% inert matter. Source separation produced 47% biodegradable, 20% inert and 33% mixed material. The study on collection infrastructure developed the necessary receiving facilities. The study on reverse logistics identified private operators capable of collecting and processing all separated inert items. Recycling activities for biodegradable material were scarce and erratic. Only farmers would take the material as animal feed. No composting initiatives existed. The management challenge was identified as stimulating these activities in order to complete the trilogy and divert the 47% source-separated biodegradable discards from the landfills. © The Author(s) 2014.

Diverse wettability of superoleophilicity and superoleophobicity for oil spill cleanup and recycling

NASA Astrophysics Data System (ADS)

Xu, Mengya; Wang, Gang; Zeng, Zhixiang; Chen, Junjun; Zhang, Xingyuan; Wang, Longsheng; Song, Weiguang; Xue, Qunji

2017-12-01

The frequent marine oil spill accidents in nowadays has aroused great attention all over the world. Lots of superwetting absorption materials with 2D or 3D structures are fabricated to efficiently remove oil spill, but the desorption of the absorbed oil is more difficult. Oil contaminants adhere on the surface will decline the performance and reusability of the absorption materials. Discarding or burning them will bring secondary pollution. Faced with these problems, we prepared an oil extractor integrated by a superhydrophobic-superoleophilic stainless steels wire mesh and a 3D porous cellulose sponge with superhydrophilicity-superoleophilicity in air and superoleophobicity in water. The oil extractor can in situ collect oil spill no matter on the water or under the water. More importantly, it is good at underwater oil desorption, which ensure the recovery and reuse of oil, and meanwhile avoid the materials being fouled by oils. More than 85.5% of crude oil could be successfully discharged only in 2 min when the oil-contaminated sponge was placed in water. The findings in this work not only put forward a new strategy for collection and reuse of various "oils", but also offer a facile method to achieve a combination of two kinds of materials with diverse wettability.

Chemical poisoning

DOE Office of Scientific and Technical Information (OSTI.GOV)

Binns, W.

1956-01-01

The toxicity of a number of chemicals are discussed in relation to their effects on farm animals. Arsenic has been a common cause of accidental poisoning of animals because it often is used to kill insects, parasites, weeds and rodents. It may be acute or chronic, depending on the amount consumed. The common symptoms are loss of flesh; a bright-red coloration of the mucous membranes; digestive disturbance, irregular pulse, and depression. Livestock may be affected by excess amounts of fluorides. An excessive amount of F interferes with the normal calcification of the bones and teeth. Animals may get lead poisoningmore » by chewing or licking lead-painted objects, lead storage batteries, and discarded painting materials. Orchard sprays also contain lead compounds. Symptoms include inflammation of the mucous membranes, loss of appetite, diarrhea, grinding of teeth, and salivation. Lead may also affect the nervous system causing animals to walk in circles and run into objects because of blindness. Molybdenum poisoning may occur in animals that graze on forage plants containing excessive amounts of the element. Some of the symptoms of chronic molybdenum poisoning are profuse diarrhea, and general weakness. Nitrate poisoning may be produced by a number of plants and fertilizer. The symptoms include staggering gait, tremors, rapid breathing and marked dilation of pupils. Salt poisoning may occur from the excessive consumption of sodium chloride. Symptoms include hypersensitivity to touch, loss of appetite and loss of coordination. Selenium poisoning is caused by the ingestion of plants that have absorbed selenium from the soils. Symptoms include loss of hair and rough horns, long and deformed hoofs, and sloughing of hoofs.« less

The Potential of Biodiesel Production derived from Fish Waste

NASA Astrophysics Data System (ADS)

Farzana Samat, Amira; Amirah Safiah Muhamad, Nor; Rasib, Nur Aziera Abd; Hassan, Siti Aminah Mohd; Sohaimi, Khairunissa Syairah Ahmad; Izzati Iberahim, Nur

2018-03-01

Petroleum based diesel is one of the largest greenhouse emitters in the worlds based on its contribution to more likely of all carbon, methane and other greenhouse emissions. Besides, the depletion of fossil fuel that indirectly increased its price has force the global oil industry not to be so dependent on the fossil fuel but instead start focusing on alternative sources. Biodiesel is recognized as a clean alternative fuel or as a fuel additive to reduce pollutant from combustion equipment. In this study, the discarded parts of mixed marine fish species were used as the raw material to produce biodiesel. Marine fish oil was extracted from the discarded part of fish and if refined through a series of pretreatment process. The refined marine fish oil undergoes esterification process to reduce the amount of free fatty acid. The oil was then transesterified with methanol and sodium hydroxide as an alkaline catalyst that will speed up the conversion of oil to methyl ester. The three process parameters considered for this study were reaction time, reaction temperature and methanol to oil molar ratio. Biodiesel obtained was then analyzed using gas chromatography (GC). Statistical analyses were performed using SPSS software. The data obtained was analyzed by using one way analysis of variance (ANOVA) repeated measure. The results obtained showed that the conversion of FAME yield is the highest at reaction time 180 minutes, reaction temperature 60°C and methanol to oil molar ratio at 15:1 with FAME yield 80.16%, 80.03% and 80.39%. Thus, it can be concluded that the conversion of biodiesel increased as the reaction time, temperature and

Cigarette Butt Decomposition and Associated Chemical Changes Assessed by 13C CPMAS NMR

PubMed Central

Bonanomi, Giuliano; Incerti, Guido; Cesarano, Gaspare; Gaglione, Salvatore A.; Lanzotti, Virginia

2015-01-01

Cigarette butts (CBs) are the most common type of litter on earth, with an estimated 4.5 trillion discarded annually. Apart from being unsightly, CBs pose a serious threat to living organisms and ecosystem health when discarded in the environment because they are toxic to microbes, insects, fish and mammals. In spite of the CB toxic hazard, no studies have addressed the effects of environmental conditions on CB decomposition rate. In this study we investigate the interactive effects of substrate fertility and N transfer dynamics on CB decomposition rate and carbon quality changes. We carried out an experiment using smoked CBs and wood sticks, used as a slow decomposing standard organic substrate, incubated in both laboratory and field conditions for two years. CB carbon quality changes during decomposition was assessed by 13C CPMAS NMR. Our experiment confirmed the low degradation rate of CBs which, on average, lost only 37.8% of their initial mass after two years of decomposition. Although a net N transfer occurred from soil to CBs, contrary to our hypothesis, mass loss in the medium-term (two years) was unaffected by N availability in the surrounding substrate. The opposite held for wood sticks, in agreement with the model that N-rich substrates promote the decomposition of other N-poor natural organic materials with a high C/N ratio. As regards CB chemical quality, after two years of decomposition 13C NMR spectroscopy highlighted very small changes in C quality that are likely to reflect a limited microbial attack. PMID:25625643

Handling e-waste in developed and developing countries: initiatives, practices, and consequences.

PubMed

Sthiannopkao, Suthipong; Wong, Ming Hung

2013-10-01

Discarded electronic goods contain a range of toxic materials requiring special handling. Developed countries have conventions, directives, and laws to regulate their disposal, most based on extended producer responsibility. Manufacturers take back items collected by retailers and local governments for safe destruction or recovery of materials. Compliance, however, is difficult to assure, and frequently runs against economic incentives. The expense of proper disposal leads to the shipment of large amounts of e-waste to China, India, Pakistan, Nigeria, and other developing countries. Shipment is often through middlemen, and under tariff classifications that make quantities difficult to assess. There, despite the intents of national regulations and hazardous waste laws, most e-waste is treated as general refuse, or crudely processed, often by burning or acid baths, with recovery of only a few materials of value. As dioxins, furans, and heavy metals are released, harm to the environment, workers, and area residents is inevitable. The faster growth of e-waste generated in the developing than in the developed world presages continued expansion of a pervasive and inexpensive informal processing sector, efficient in its own way, but inherently hazard-ridden. Copyright © 2012 Elsevier B.V. All rights reserved.

Oxyhalides: A new class of high-TC multiferroic materials

PubMed Central

Zhao, Li; Fernández-Díaz, Maria Teresa; Tjeng, Liu Hao; Komarek, Alexander C.

2016-01-01

Magnetoelectric multiferroics have attracted enormous attention in the past years because of their high potential for applications in electronic devices, which arises from the intrinsic coupling between magnetic and ferroelectric ordering parameters. The initial finding in TbMnO3 has triggered the search for other multiferroics with higher ordering temperatures and strong magnetoelectric coupling for applications. To date, spin-driven multiferroicity is found mainly in oxides, as well as in a few halogenides. We report multiferroic properties for synthetic melanothallite Cu2OCl2, which is the first discovery of multiferroicity in a transition metal oxyhalide. Measurements of pyrocurrent and the dielectric constant in Cu2OCl2 reveal ferroelectricity below the Néel temperature of ~70 K. Thus, melanothallite belongs to a new class of multiferroic materials with an exceptionally high critical temperature. Powder neutron diffraction measurements reveal an incommensurate magnetic structure below TN, and all magnetic reflections can be indexed with a propagation vector [0.827(7), 0, 0], thus discarding the claimed pyrochlore-like “all-in–all-out” spin structure for Cu2OCl2, and indicating that this transition metal oxyhalide is, indeed, a spin-induced multiferroic material. PMID:27386552

Subcaliber discarding sabot airgun projectiles.

PubMed

Frank, Matthias; Schönekeß, Holger; Herbst, Jörg; Staats, Hans-Georg; Ekkernkamp, Axel; Nguyen, Thanh Tien; Bockholdt, Britta

2014-03-01

Medical literature abounds with reports on injuries and fatalities caused by airgun projectiles. While round balls or diabolo pellets have been the standard projectiles for airguns for decades, today, there are a large number of different airgun projectiles available. A very uncommon--and until now unique--discarding sabot airgun projectile (Sussex Sabo Bullet) was introduced into the market in the 1980s. The projectile, available in 0.177 (4.5 mm) and 0.22 (5.5 mm) caliber, consists of a plastic sabot cup surrounding a subcaliber copper-coated lead projectile in typical bullet shape. Following the typical principle of a discarding sabot projectile, the lightweight sabot is supposed to quickly loose velocity and to fall to the ground downrange while the bullet continues on target. These sabot-loaded projectiles are of special forensic interest due to their non-traceability and ballistic parameters. Therefore, it is the aim of this work to investigate the ballistic performance of these sabot airgun projectiles by high-speed video analyses and by measurement of the kinetic parameters of the projectile parts by a transient recording system as well as observing their physical features after being fired. While the sabot principle worked properly in high-energy airguns (E > 17 J), separation of the core projectile from the sabot cup was also observed when discharged in low-energy airguns (E < 7.5 J). While the velocity of the discarded Sussex Sabo core projectile was very close to the velocity of a diabolo-type reference projectile (RWS Meisterkugel), energy density was up to 60 % higher. To conclude, this work is the first study to demonstrate the regular function of this uncommon type of airgun projectile.

Impact of increased syringe access: preliminary findings on injection drug user syringe source, disposal, and pharmacy sales in Harlem, New York.

PubMed

Fuller, Crystal M; Ahern, Jennifer; Vadnai, Liza; Coffin, Phillip O; Galea, Sandro; Factor, Stephanie H; Vlahov, David

2002-01-01

To evaluate the New York State Expanded Syringe Access Demonstration Program (ESAP) through injection drug user (IDU) surveys, discarded needles and syringes studies, and pharmacy sales and experiences surveys. Pre-post comparison. In Harlem, New York City, risk surveys among street-recruited IDUs, needle/syringe street counts on 27 systematically sampled city blocks, and Harlem pharmacist reports of sales and experiences. Number and types of IDU syringe sources, block mean counts of discarded needles and syringes, level of pharmacy nonprescription syringe sales (NPSS), and pharmacists' experiences. Comparing 209 pre-ESAP with 396 post-ESAP IDUs, pharmacies as a primary syringe source increased: 3.4% to 5.3% (P < .001, and ever pharmacy use increased: 4.9% to 12.5% (P < .001), respectively. Compared with pre-ESAP IDUs, post-ESAP IDUs tended to be younger and more often black. Harlem pharmacy participation in ESAP increased considerably from March 1, 2001, to March 1, 2002, 49% to 79%, respectively. Among three Harlem pharmacies, there was a modest increase in NPSS; pharmacists reported no problems, and no discarded needles and syringes were observed in pharmacy areas. In the three pharmacies, the proportion of syringe sales that were NPSS was 46% (110 to 240 NPSS/month), 3% (25 to 90 NPSS/month), and 0%. The mean ratios of needles/syringes to background trash have not increased in Harlem since ESAP began. To date, no evidence of harmful effects discarded needles/syringes, pharmacy altercations) resulting from ESAP were observed. While NPSS have increased in Harlem, pharmacy use among IDUs remains low. In Harlem, efforts are underway to increase ESAP awareness and reduce socioenvironmental barriers to ESAP.

Low vacuum and discard tubes reduce hemolysis in samples drawn from intravenous catheters.

PubMed

Heiligers-Duckers, Connie; Peters, Nathalie A L R; van Dijck, Jose J P; Hoeijmakers, Jan M J; Janssen, Marcel J W

2013-08-01

In-vitro hemolysis is a great challenge to emergency departments where blood is drawn from intravenous catheters (IVCs). Although high quality samples can be obtained by straight needle venipuncture, IVCs are preferred for various reasons. The aim of this study was to identify blood collection practices that reduce hemolysis while using IVC. The study was conducted at an emergency department where blood is drawn in ≥ 90% of patients from IVC. Hemolysis, measured spectrophotometrically, was compared between syringe and vacuum tubes. The following practices were tested in combination with vacuum collection; a Luer-slip adapter, a Luer-lock adapter, discard tubes and low vacuum tubes. Each intervention lasted 1 week and retrieved 154 to 297 samples. As reference, hemolysis was also measured in vacuum tubes retrieved from departments where only straight needle venipuncture is performed. Vacuum collection led to more hemolytic samples compared with syringe tubes (24% versus 16% respectively, p=0.008). No difference in hemolysis was observed between the Luer-slip and the Luer-lock adapter. The use of discard (17% hemolytic, p=0.045) and low vacuum tubes (12% hemolytic, p<0.001) substantially decreased hemolysis. None of the interventions reduced the hemolysis rate to the level observed when drawing blood by straight needle venipuncture (3%, p<0.02). In summary, both discard and low vacuum tubes reduce hemolysis while drawing blood from IVC. Of these practices the use of a low vacuum tube is preferred considering the less volume of blood and the amount of tubes drawn. Copyright © 2013 The Canadian Society of Clinical Chemists. Published by Elsevier Inc. All rights reserved.

Recipient Selection for Optimal Utilization of Discarded Grafts in Liver Transplantation.

PubMed

Giretti, Giovanni; Barbier, Louise; Bucur, Petru; Marques, Frédéric; Perarnau, Jean-Marc; Ferrandière, Martine; Tellier, Anne-Charlotte; Kerouredan, Vincent; Altieri, Mario; Causse, Xavier; Debette-Gratien, Maryline; Silvain, Christine; Salamé, Ephrem

2018-05-01

In France, liver grafts that have been refused by at least 5 teams are considered for rescue allocation (RA), with the choice of the recipient being at the team's discretion. Although this system permits the use of otherwise discarded grafts in a context of organ shortage, outcomes and potential benefits need to be assessed. Between 2011 and 2015, outcomes of RA grafts (n = 33) were compared with SA grafts (n = 321) at a single French center. Liver grafts in the RA group were older (63 ± 17 years vs 54 ± 18 years, P = 0.007) and had a higher DRI (1.86 ± 0.45 vs 1.61 ± 0.47, P = 0.010). Recipients in this group had a lower Model for End-Stage Liver Disease score (14 ± 5 vs 22 ± 10, P < 0.001) and had mostly hepatocellular carcinoma (67.0% vs 40.4%, P = 0.010). The balance of risk score was significantly lower in the RA group (5.5 ± 2.9 vs 9.2 ± 5.5, P < 0.001). There were higher rates of early and delayed hepatic artery thrombosis (15.2% vs 3.1%, P = 0.001) and retransplantation (18.2% vs 4.7%, P = 0.002) in the RA group. Patient survival was not different between groups, but graft survival was impaired (95% vs 82% at 1 year and 94% vs 74% at 3 years, P = 0.001). Our results show that discarded liver grafts can be used provided that there is a strict recipient selection process, although hepatic artery thrombosis and retransplantation are more frequent. This strategy enables utilization of otherwise discarded grafts in the context of organ shortage.

Successful Dual Kidney Transplantation After Hypothermic Oxygenated Perfusion of Discarded Human Kidneys

PubMed Central

Ravaioli, Matteo; De Pace, Vanessa; Comai, Giorgia; Busutti, Marco; Gaudio, Massimo Del; Amaduzzi, Annalisa; Cucchetti, Alessandro; Siniscalchi, Antonio; La Manna, Gaetano; D’Errico, Antonietta A.D.; Pinna, Antonio Daniele

2017-01-01

Patient: Female, 58 Final Diagnosis: Nephroangiosclerosis Symptoms: Renal failure Medication: — Clinical Procedure: Resuscitation of grafts by hypothermic oxygenated perfusion Specialty: Transplantology Objective: Challenging differential diagnosis Background: The recovery of discarded human kidneys has increased in recent years and impels to use of unconventional organ preservation strategies that improve graft function. We report the first case of human kidneys histologically discarded and transplanted after hypothermic oxygenated perfusion (HOPE). Case Report: Marginal kidneys from a 78-year-old woman with brain death were declined by Italian transplant centers due to biopsy score (right kidney: 6; left kidney: 7). We recovered and preserved both kidneys through HOPE and we revaluated their use for transplantation by means of perfusion parameters. The right kidney was perfused for 1 h 20 min and the left kidney for 2 h 30 min. During organ perfusion, the renal flow increased progressively. We observed an increase of 34% for the left kidney (median flow 52 ml/min) and 50% for the right kidney (median flow 24 ml/min). Both kidneys had low perfusate’s lactate levels. We used perfusion parameters as important determinants of the organ discard. Based on our previous organ perfusion experience, the increase of renal flow and the low level of lactate following 1 h of HOPE lead us to declare both kidneys as appropriate for dual kidney transplantation (DKT). No complications were reported during the transplant and in the post-transplant hospital stay. The recipient had immediate graft function and serum creatinine value of 0.95 mg/dL at 3 months post-transplant. Conclusions: HOPE provides added information in the organ selection process and may improve graft quality of marginal kidneys. PMID:28928357

Capture-related stressors impair immune system function in sablefish

USGS Publications Warehouse

Lupes, S.C.; Davis, M.W.; Olla, B.L.; Schreck, C.B.

2006-01-01

The sablefish Anoplopoma fimbria is a valuable North Pacific Ocean species that, when not targeted in various commercial fisheries, is often a part of discarded bycatch. Predictions of the survival of discarded fish are dependent on understanding how a fish responds to stressful conditions. Our objective was to describe the immunological health of sablefish exposed to capture stressors. In laboratory experiments designed to simulate the capture process, we subjected sablefish to various stressors that might influence survival: towing in a net, hooking, elevated seawater and air temperatures, and air exposure time. After stress was imposed, the in vitro mitogen-stimulated proliferation of sablefish leukocytes was used to evaluate the function of the immune system in an assay we validated for this species. The results demonstrated that regardless of fishing gear type, exposure to elevated seawater temperature, or time in air, the leukocytes from stressed sablefish exhibited significantly diminished proliferative responses to the T-cell mitogen, concanavalin A, or the B-cell mitogen, lipopolysaccharide. There was no difference in the immunological responses associated with seawater or air temperature. The duration and severity of the capture stressors applied in our study were harsh enough to induce significantly elevated levels of plasma cortisol and glucose, but there was no difference in the magnitude of levels among stressor treatments. These data suggest that immunological suppression occurs in sablefish subjected to capture-related stressors. The functional impairment of the immune system after capture presents a potential reason why delayed mortality is possible in discarded sablefish. Further studies are needed to determine whether delayed mortality in discarded sablefish can be caused by increased susceptibility to infectious agents resulting from stressor-mediated immunosuppression.

Epidemiology of measles in vaccinated people, Spain 2003-2014.

PubMed

Risco-Risco, Carlos; Masa-Calles, Josefa; López-Perea, Noemí; Echevarría, Juan Emilio; Rodríguez-Caravaca, Gil

2017-11-01

During the final phase of measles elimination rigorous investigation of each individual case becomes fundamental to confirm or discard cases, particularly among vaccinated people, since they experience a milder disease, and laboratory diagnosis is more complex. Our study focused in the epidemiology of measles in vaccinated people. Longitudinal study on measles cases in two dose vaccinated people in Spain from 2003 to 2014. We confirmed 138 measles cases (90 of them, laboratory confirmed) in people with two doses of vaccine. The median of time from last vaccination to rash onset showed a lineal trend (P<.001), in parallel with the number of doses of vaccine received (0, 1, 2 doses). Among confirmed cases, the hospitalization risk decreased inversely proportional to the number of administered vaccine doses (linear trend, P<.001). Only in 23.9% of confirmed cases and 50% of discarded cases the guidelines about sample taking were fulfilled. 50% of samples in two dose vaccinated people were taken without fulfilling time delay criteria. 16.7% (36/215) of discarded cases with a negative IgM result did correspond to samples taken early (first 72h after rash) and could represent false negatives. Our results highlight the importance of fulfilling properly the guidelines for laboratory diagnosis in order to confirm or discard every measles case, especially in two dose vaccinated people. When a negative IgM result is obtained in early samples a new IgM test should be practiced, as well as a PCR test, in order to avoid infra-detection of cases. Copyright © 2016 Elsevier España, S.L.U. and Sociedad Española de Enfermedades Infecciosas y Microbiología Clínica. All rights reserved.

Synthesis of carbon nanotubes from waste polyethylene plastics

NASA Astrophysics Data System (ADS)

Zhuo, Chuanwei

Generation of non-biodegradable wastes, such as plastics, and resulting land as well as water pollution therefrom discarded plastics have been continuously increasing, while landfill space decreases and recycling markets dwindle. Exploration of novel uses of such materials becomes therefore imperative. Here I present an innovative and unique partial conversion of plastic waste to valuable carbon nanomaterials. It is an overall exothermic and scalable process based on feeding waste plastics to a multi-stage, pyrolysis/combustion-synthesis reactor. Plain stainless steel screens are used as substrates as well as low-cost catalyst for both carbon nanomaterials synthesis and pyrolyzates generation. Nano carbon yields of as high as 13.6% of the weight of the polymer precursor were recorded. This demonstration provides a sustainable solution to both plastic waste utilization, and carbon nanomaterials mass production.

Scrap tyre recycling process with molten zinc as direct heat transfer and solids separation fluid: A new reactor concept.

PubMed

Riedewald, Frank; Goode, Kieran; Sexton, Aidan; Sousa-Gallagher, Maria J

2016-01-01

Every year about 1.5 billion tyres are discarded worldwide representing a large amount of solid waste, but also a largely untapped source of raw materials. The objective of the method was to prove the concept of a novel scrap tyre recycling process which uses molten zinc as the direct heat transfer fluid and, simultaneously, uses this media to separate the solids products (i.e. steel and rCB) in a sink-float separation at an operating temperature of 450-470 °C. This methodology involved: •construction of the laboratory scale batch reactor,•separation of floating rCB from the zinc,•recovery of the steel from the bottom of the reactor following pyrolysis.

Monitour: Tracking global routes of electronic waste.

PubMed

Lee, David; Offenhuber, Dietmar; Duarte, Fábio; Biderman, Assaf; Ratti, Carlo

2018-02-01

Many nations seek to control or prevent the inflow of waste electronic and electrical equipment, but such flows are difficult to track due to undocumented, often illegal global trade in e-waste. We apply wireless GPS location trackers to this problem, detecting potential cases of non-compliant recycling operations in the United States as well as the global trajectories of exported e-waste. By planting hidden trackers inside discarded computer monitors and printers, we tracked dozens of devices being sent overseas to various ports in Asia, flows likely unreported in official trade data. We discuss how location tracking enables new ways to monitor, regulate, and enforce rules on the international movement of hazardous electronic waste materials, and the limitations of such methods. Copyright © 2017 Elsevier Ltd. All rights reserved.

Nest Material Shapes Eggs Bacterial Environment.

PubMed

Ruiz-Castellano, Cristina; Tomás, Gustavo; Ruiz-Rodríguez, Magdalena; Martín-Gálvez, David; Soler, Juan José

2016-01-01

Selective pressures imposed by pathogenic microorganisms to embryos have selected in hosts for a battery of antimicrobial lines of defenses that includes physical and chemical barriers. Due to the antimicrobial properties of volatile compounds of green plants and of chemicals of feather degrading bacteria, the use of aromatic plants and feathers for nest building has been suggested as one of these barriers. However, experimental evidence suggesting such effects is scarce in the literature. During two consecutive years, we explored experimentally the effects of these nest materials on loads of different groups of bacteria (mesophilic bacteria, Enterobacteriaceae, Staphylococcus and Enterococcus) of eggshells in nests of spotless starlings (Sturnus unicolor) at the beginning and at the end of the incubation period. This was also explored in artificial nests without incubation activity. We also experimentally increased bacterial density of eggs in natural and artificial nests and explored the effects of nest lining treatments on eggshell bacterial load. Support for the hypothetical antimicrobial function of nest materials was mainly detected for the year and location with larger average values of eggshell bacterial density. The beneficial effects of feathers and plants were more easily detected in artificial nests with no incubation activity, suggesting an active role of incubation against bacterial colonization of eggshells. Pigmented and unpigmented feathers reduced eggshell bacterial load in starling nests and artificial nest boxes. Results from artificial nests allowed us to discuss and discard alternative scenarios explaining the detected association, particularly those related to the possible sexual role of feathers and aromatic plants in starling nests. All these results considered together confirm the antimicrobial functionality mainly of feathers but also of plants used as nest materials, and highlight the importance of temporally and geographically environmental variation associated with risk of bacterial proliferation determining the strength of such effects. Because of costs associated to nest building, birds should adjust nest building effort to expected bacterial environments during incubation, a prediction that should be further explored.

Nest Material Shapes Eggs Bacterial Environment

PubMed Central

Ruiz-Castellano, Cristina; Tomás, Gustavo; Ruiz-Rodríguez, Magdalena; Martín-Gálvez, David; Soler, Juan José

2016-01-01

Selective pressures imposed by pathogenic microorganisms to embryos have selected in hosts for a battery of antimicrobial lines of defenses that includes physical and chemical barriers. Due to the antimicrobial properties of volatile compounds of green plants and of chemicals of feather degrading bacteria, the use of aromatic plants and feathers for nest building has been suggested as one of these barriers. However, experimental evidence suggesting such effects is scarce in the literature. During two consecutive years, we explored experimentally the effects of these nest materials on loads of different groups of bacteria (mesophilic bacteria, Enterobacteriaceae, Staphylococcus and Enterococcus) of eggshells in nests of spotless starlings (Sturnus unicolor) at the beginning and at the end of the incubation period. This was also explored in artificial nests without incubation activity. We also experimentally increased bacterial density of eggs in natural and artificial nests and explored the effects of nest lining treatments on eggshell bacterial load. Support for the hypothetical antimicrobial function of nest materials was mainly detected for the year and location with larger average values of eggshell bacterial density. The beneficial effects of feathers and plants were more easily detected in artificial nests with no incubation activity, suggesting an active role of incubation against bacterial colonization of eggshells. Pigmented and unpigmented feathers reduced eggshell bacterial load in starling nests and artificial nest boxes. Results from artificial nests allowed us to discuss and discard alternative scenarios explaining the detected association, particularly those related to the possible sexual role of feathers and aromatic plants in starling nests. All these results considered together confirm the antimicrobial functionality mainly of feathers but also of plants used as nest materials, and highlight the importance of temporally and geographically environmental variation associated with risk of bacterial proliferation determining the strength of such effects. Because of costs associated to nest building, birds should adjust nest building effort to expected bacterial environments during incubation, a prediction that should be further explored. PMID:26871451

Biotechnological possibilities for waste tyre-rubber treatment.

PubMed

Holst, O; Stenberg, B; Christiansson, M

1998-01-01

Every year large amounts of spent rubber material, mainly from rubber tyres, are discarded. Of the annual total global production of rubber material, which amounts to 16-17 million tonnes, approximately 65% is used for the production of tyres. About 250 millions spent car tyres are generated yearly in USA only. This huge amount of waste rubber material is an environmental problem of great concern. Various ways to remediate the problem have been proposed. Among these are road fillings and combustion in kilns. Spent tyres, however, comprise valuable material that could be recycled if a proper technique can be developed. One way of recycling old tyres is to blend ground spent rubber with virgin material followed by vulcanization. The main obstacle to this recycling is bad adhesion between the crumb and matrix of virgin rubber material due to little formation of interfacial sulphur crosslinks. Micro-organisms able to break sulphur-sulphur and sulphur-carbon bonds can be used to devulcanize waste rubber in order to make polymer chains on the surface more flexible and facilitate increased binding upon vulcanization. Several species belonging to both Bacteria and Archaea have this ability. Mainly sulphur oxidizing species, such as different species of the genus Thiobacillus and thermoacidophiles of the order of Sulfolobales, have been studied in this context. The present paper will give a background to the problem and an overview of the biotechnological possibilities for solutions of waste rubber as an environmental problem, focusing on microbial desulphurization.

Optimal message log reclamation for independent checkpointing

NASA Technical Reports Server (NTRS)

Wang, Yi-Min; Fuchs, W. Kent

1993-01-01

Independent (uncoordinated) check pointing for parallel and distributed systems allows maximum process autonomy but suffers from possible domino effects and the associated storage space overhead for maintaining multiple checkpoints and message logs. In most research on check pointing and recovery, it was assumed that only the checkpoints and message logs older than the global recovery line can be discarded. It is shown how recovery line transformation and decomposition can be applied to the problem of efficiently identifying all discardable message logs, thereby achieving optimal garbage collection. Communication trace-driven simulation for several parallel programs is used to show the benefits of the proposed algorithm for message log reclamation.

Statistical inference for Hardy-Weinberg proportions in the presence of missing genotype information.

PubMed

Graffelman, Jan; Sánchez, Milagros; Cook, Samantha; Moreno, Victor

2013-01-01

In genetic association studies, tests for Hardy-Weinberg proportions are often employed as a quality control checking procedure. Missing genotypes are typically discarded prior to testing. In this paper we show that inference for Hardy-Weinberg proportions can be biased when missing values are discarded. We propose to use multiple imputation of missing values in order to improve inference for Hardy-Weinberg proportions. For imputation we employ a multinomial logit model that uses information from allele intensities and/or neighbouring markers. Analysis of an empirical data set of single nucleotide polymorphisms possibly related to colon cancer reveals that missing genotypes are not missing completely at random. Deviation from Hardy-Weinberg proportions is mostly due to a lack of heterozygotes. Inbreeding coefficients estimated by multiple imputation of the missings are typically lowered with respect to inbreeding coefficients estimated by discarding the missings. Accounting for missings by multiple imputation qualitatively changed the results of 10 to 17% of the statistical tests performed. Estimates of inbreeding coefficients obtained by multiple imputation showed high correlation with estimates obtained by single imputation using an external reference panel. Our conclusion is that imputation of missing data leads to improved statistical inference for Hardy-Weinberg proportions.

VizieR Online Data Catalog: Galaxies in Hercules-Bootes region (Karachentsev+, 2017)

NASA Astrophysics Data System (ADS)

Karachentsev, I. D.; Kashibadze, O. G.; Karachentseva, V. E.

2017-04-01

The table contains original observational data on 412 galaxies in the Hercules-Bootes region with radial velocities of VLG<2500km/s. The main source of data is the NASA Extragalactic Database (NED) with additions from the HyperLEDA Database. Each object with a radial velocity estimate was visually inspected, and a large number of false "galaxies" with radial velocities of around zero was discarded. For many galaxies, we have refined the morphological types and integral B-magnitudes. The resulting sample includes 181 galaxies with individual distance estimates. (1 data file).

The Intended and Unintended Consequences of a Legal Measure to Cut the Flow of Illegal Cigarettes Into New York City: The Case of the South Bronx

PubMed Central

Kurti, Marin; Johnson, Jacqueline

2015-01-01

Objectives. We examined the impact of a change in New York tax law on the numbers of untaxed cigarettes bootlegged from Native American reservations and resold in the South Bronx. Methods. Discarded cigarette packs were systematically collected in 30 randomized South Bronx census tracks before and after the amended tax law went into effect in 2011. Also, administrative data were gathered on the number of taxed cigarettes sold in New York State, including sales to Native American reservations. Results. Before the tax amendment, 42% of discarded cigarette packs collected in the South Bronx had no tax stamp. After the tax law went into effect, the percentage of cigarette packs without tax stamps declined to 6.2%. Simultaneously, the percentage of packs with out-of-state tax stamps rose from 18.3% to 66.3%. The percentage of packs with a combined New York State and New York City tax stamp did not change after the tax amendment. Conclusions. After the tax amendment, the supply of contraband cigarettes appears to have quickly shifted from one lower-priced jurisdiction to another without a change in the overall prevalence of contraband cigarettes. PMID:25713940

Space Resource Utilization: Technologies and Potential Synergism with Terrestrial Mining

NASA Technical Reports Server (NTRS)

Sanders, Gerald B.

2015-01-01

Space Resources and Their Uses: The idea of using resources in space to support human exploration and settlement or for economic development and profit beyond the surface of Earth has been proposed and discussed for decades. Work on developing a method to extract oxygen from lunar regolith started even before humans set foot on the Moon for the first time. The use of space resources, commonly referred to as In Situ Resource Utilization (ISRU), involves the processes and operations to harness and utilize resources in space (both natural and discarded) to create products for subsequent use. Potential space resources include water, solar wind implanted volatiles (hydrogen, helium, carbon, nitrogen, etc.), vast quantities of metals and minerals in extraterrestrial soils, atmospheric constituents, unlimited solar energy, regions of permanent light and darkness, the vacuum and zero-gravity of space itself, trash and waste from human crew activities, and discarded hardware that has completed its primary purpose. ISRU covers a wide variety of concepts, technical disciplines, technologies, and processes. When considering all aspects of ISRU, there are 5 main areas that are relevant to human space exploration and the commercialization of space: 1. Resource Characterization and Mapping, 2. In Situ Consumables Production, 3. Civil Engineering and Construction, 4. In Situ Energy Production and Storage, and 5. In Situ Manufacturing.

Adaptive Baseline Enhances EM-Based Policy Search: Validation in a View-Based Positioning Task of a Smartphone Balancer

PubMed Central

Wang, Jiexin; Uchibe, Eiji; Doya, Kenji

2017-01-01

EM-based policy search methods estimate a lower bound of the expected return from the histories of episodes and iteratively update the policy parameters using the maximum of a lower bound of expected return, which makes gradient calculation and learning rate tuning unnecessary. Previous algorithms like Policy learning by Weighting Exploration with the Returns, Fitness Expectation Maximization, and EM-based Policy Hyperparameter Exploration implemented the mechanisms to discard useless low-return episodes either implicitly or using a fixed baseline determined by the experimenter. In this paper, we propose an adaptive baseline method to discard worse samples from the reward history and examine different baselines, including the mean, and multiples of SDs from the mean. The simulation results of benchmark tasks of pendulum swing up and cart-pole balancing, and standing up and balancing of a two-wheeled smartphone robot showed improved performances. We further implemented the adaptive baseline with mean in our two-wheeled smartphone robot hardware to test its performance in the standing up and balancing task, and a view-based approaching task. Our results showed that with adaptive baseline, the method outperformed the previous algorithms and achieved faster, and more precise behaviors at a higher successful rate. PMID:28167910

Zero-Time Renal Transplant Biopsies: A Comprehensive Review.

PubMed

Naesens, Maarten

2016-07-01

Zero-time kidney biopsies, obtained at time of transplantation, are performed in many transplant centers worldwide. Decisions on kidney discard, kidney allocation, and choice of peritransplant and posttransplant treatment are sometimes based on the histological information obtained from these biopsies. This comprehensive review evaluates the practical considerations of performing zero-time biopsies, the predictive performance of zero-time histology and composite histological scores, and the clinical utility of these biopsies. The predictive performance of individual histological lesions and of composite scores for posttransplant outcome is at best moderate. No single histological lesion or composite score is sufficiently robust to be included in algorithms for kidney discard. Dual kidney transplantation has been based on histological assessment of zero-time biopsies and improves outcome in individual patients, but the waitlist effects of this strategy remain obscure. Zero-time biopsies are valuable for clinical and translational research purposes, providing insight in risk factors for posttransplant events, and as baseline for comparison with posttransplant histology. The molecular phenotype of zero-time biopsies yields novel therapeutic targets for improvement of donor selection, peritransplant management and kidney preservation. It remains however highly unclear whether the molecular expression variation in zero-time biopsies could become a better predictor for posttransplant outcome than donor/recipient baseline demographic factors.

Miniature Laboratory for Detecting Sparse Biomolecules

NASA Technical Reports Server (NTRS)

Lin, Ying; Yu, Nan

2005-01-01

A miniature laboratory system has been proposed for use in the field to detect sparsely distributed biomolecules. By emphasizing concentration and sorting of specimens prior to detection, the underlying system concept would make it possible to attain high detection sensitivities without the need to develop ever more sensitive biosensors. The original purpose of the proposal is to aid the search for signs of life on a remote planet by enabling the detection of specimens as sparse as a few molecules or microbes in a large amount of soil, dust, rocks, water/ice, or other raw sample material. Some version of the system could prove useful on Earth for remote sensing of biological contamination, including agents of biological warfare. Processing in this system would begin with dissolution of the raw sample material in a sample-separation vessel. The solution in the vessel would contain floating microscopic magnetic beads coated with substances that could engage in chemical reactions with various target functional groups that are parts of target molecules. The chemical reactions would cause the targeted molecules to be captured on the surfaces of the beads. By use of a controlled magnetic field, the beads would be concentrated in a specified location in the vessel. Once the beads were thus concentrated, the rest of the solution would be discarded. This procedure would obviate the filtration steps and thereby also eliminate the filter-clogging difficulties of typical prior sample-concentration schemes. For ferrous dust/soil samples, the dissolution would be done first in a separate vessel before the solution is transferred to the microbead-containing vessel.

Use of recycled plastic in concrete: a review.

PubMed

Siddique, Rafat; Khatib, Jamal; Kaur, Inderpreet

2008-01-01

Numerous waste materials are generated from manufacturing processes, service industries and municipal solid wastes. The increasing awareness about the environment has tremendously contributed to the concerns related with disposal of the generated wastes. Solid waste management is one of the major environmental concerns in the world. With the scarcity of space for landfilling and due to its ever increasing cost, waste utilization has become an attractive alternative to disposal. Research is being carried out on the utilization of waste products in concrete. Such waste products include discarded tires, plastic, glass, steel, burnt foundry sand, and coal combustion by-products (CCBs). Each of these waste products has provided a specific effect on the properties of fresh and hardened concrete. The use of waste products in concrete not only makes it economical, but also helps in reducing disposal problems. Reuse of bulky wastes is considered the best environmental alternative for solving the problem of disposal. One such waste is plastic, which could be used in various applications. However, efforts have also been made to explore its use in concrete/asphalt concrete. The development of new construction materials using recycled plastics is important to both the construction and the plastic recycling industries. This paper presents a detailed review about waste and recycled plastics, waste management options, and research published on the effect of recycled plastic on the fresh and hardened properties of concrete. The effect of recycled and waste plastic on bulk density, air content, workability, compressive strength, splitting tensile strength, modulus of elasticity, impact resistance, permeability, and abrasion resistance is discussed in this paper.

Nickel recycling in the United States in 2004

USGS Publications Warehouse

Goonan, Thomas G.

2009-01-01

As one of a series of reports that describe the recycling of metal commodities in the United States, this report discusses the flow of nickel from production through distribution and use, with particular emphasis on the recycling of industrial scrap (new scrap) and used products (old scrap) in 2004. This materials flow study includes a description of nickel supply and demand for the United States to illustrate the extent of nickel recycling and to identify recycling trends. Understanding how materials flow from a source through disposition can aid in improving the management of natural resource delivery systems. In 2004, the old scrap recycling efficiency for nickel was estimated to be 56.2 percent. In 2004, nickel scrap consumption in the United States was as follows: new scrap containing 13,000 metric tons (t) of nickel (produced during the manufacture of products), 12 percent; and old scrap containing 95,000 t of nickel (articles discarded after serving a useful purpose), 88 percent. The recycling rate for nickel in 2004 was 40.9 percent, and the percentage of nickel in products attributed to nickel recovered from nickel-containing scrap was 51.6 percent. Furthermore, U.S. nickel scrap theoretically generated in 2004 had the following distribution: scrap to landfills, 24 percent; recovered and used scrap, 50 percent; and unaccounted for scrap, 26 percent. Of the 50 percent of old scrap generated in the United States that was recovered and then used in 2004, about one-third was exported and two-thirds was consumed in the domestic production of nickel-containing products.

Recycling of porcelain tile polishing residue in portland cement: hydration efficiency.

PubMed

Pelisser, Fernando; Steiner, Luiz Renato; Bernardin, Adriano Michael

2012-02-21

Ceramic tiles are widely used by the construction industry, and the manufacturing process of ceramic tiles generates as a major residue mud derived from the polishing step. This residue is too impure to be reused in the ceramic process and is usually discarded as waste in landfills. But the analysis of the particle size and concentration of silica of this residue shows a potential use in the manufacture of building materials based on portland cement. Tests were conducted on cement pastes and mortars using the addition of 10% and 20% (mass) of the residue. The results of compressive strength in mortars made up to 56 days showed a significant increase in compressive strength greater than 50%. The result of thermogravimetry shows that portlandite is consumed by the cement formed by the silica present in the residue in order to form calcium silicate hydrate and featuring a pozzolanic reaction. This effect improves the performance of cement, contributes to research and application of supplementary cementitious materials, and optimizes the use of portland cement, reducing the environmental impacts of carbon dioxide emissions from its production.

Recent insertion/deletion (reINDEL) mutations: increasing awareness to boost molecular-based research in ecology and evolution

PubMed Central

Schlick-Steiner, Birgit C; Arthofer, Wolfgang; Moder, Karl; Steiner, Florian M

2015-01-01

Today, the comparative analysis of DNA molecules mainly uses information inferred from nucleotide substitutions. Insertion/deletion (INDEL) mutations, in contrast, are largely considered uninformative and discarded, due to our lacking knowledge on their evolution. However, including rather than discarding INDELs would be relevant to any research area in ecology and evolution that uses molecular data. As a practical approach to better understanding INDEL evolution in general, we propose the study of recent INDEL (reINDEL) mutations – mutations where both ancestral and derived state are seen in the sample. The precondition for reINDEL identification is knowledge about the pedigree of the individuals sampled. Sound reINDEL knowledge will allow the improved modeling needed for including INDELs in the downstream analysis of molecular data. Both microsatellites, currently still the predominant marker system in the analysis of populations, and sequences generated by next-generation sequencing, a promising and rapidly developing range of technologies, offer the opportunity for reINDEL identification. However, a 2013 sample of animal microsatellite studies contained unexpectedly few reINDELs identified. As most likely explanation, we hypothesize that reINDELs are underreported rather than absent and that this underreporting stems from common reINDEL unawareness. If our hypothesis applies, increased reINDEL awareness should allow gathering data rapidly. We recommend the routine reporting of either the absence or presence of reINDELs together with standardized key information on the nature of mutations when they are detected and the use of the keyword “reINDEL” to increase visibility in both instances of successful and unsuccessful search. PMID:25628861

A no-hair theorem for black holes in f(R) gravity

NASA Astrophysics Data System (ADS)

Cañate, Pedro

2018-01-01

In this work we present a no-hair theorem which discards the existence of four-dimensional asymptotically flat, static and spherically symmetric or stationary axisymmetric, non-trivial black holes in the frame of f(R) gravity under metric formalism. Here we show that our no-hair theorem also can discard asymptotic de Sitter stationary and axisymmetric non-trivial black holes. The novelty is that this no-hair theorem is built without resorting to known mapping between f(R) gravity and scalar–tensor theory. Thus, an advantage will be that our no-hair theorem applies as well to metric f(R) models that cannot be mapped to scalar–tensor theory.

Pollutant levels in discarded fish species by Spanish trawlers operating in the Great Sole Bank and the Atlantic coast of the Iberian Peninsula.

PubMed

Antelo, Luis T; Ordóñez-Del Pazo, Tatiana; Lopes, Carla; Franco-Uría, Amaya; Pérez-Martín, Ricardo I; Alonso, Antonio A

2016-07-15

Organic and inorganic pollutant levels were determined for the most discarded species from trawlers operating in Great Sole and Spanish coastal fishing grounds. Results for heavy metals indicated that Cd can reach values higher than legal limits for some species and tissues, while Hg and Pb concentrations are below established values. No significant variation was noticed with fishing grounds, but both season influences in the case of Pb and interspecies variation for Hg and Cd have been detected. Valorization recommendations could be therefore established according to the levels found in the different species. Copyright © 2016 Elsevier Ltd. All rights reserved.

Trash to Gas (TtG) Simulant Analysis

NASA Technical Reports Server (NTRS)

Miles, John D., II; Hintze, Paul E.

2014-01-01

Space exploration in outer earths orbit is a long-term commitment, where the reuse of discarded materials is a critical component for its success. The Logistics Reduction and Repurposing (LRR) project under the NASA Advanced Exploration System Program is a project focused on technologies that reduce the amount of consumables that are needed to be sent into space, repurpose items sent to space, or convert wastes to commodities. In particular, Trash to Gas (TtG), part of the LRR project, is a novel space technology capable of converting raw elements from combustible waste including food waste and packaging, paper, wipes and towels, nitrile gloves, fecal matter, urine brine, maximum absorbency garments, and other organic wastes from human space exploration into useful gases. Trash to gas will ultimately reduce mission cost by producing a portion of important consumables in situ. This paper will discuss results of waste processing by steam reforming. Steam reforming is a thermochemical process developed as part of TtG, where waste is heated in the presence of oxygen and steam to produce carbon dioxide, carbon monoxide, hydrogen, methane and water. The aim of this experiment is to investigate the processing of different waste simulants and their gaseous products. This will lay a foundation for understating and optimizing the production of useful gases for propulsion and recovery of water for life support.

A review on management of spent lithium ion batteries and strategy for resource recycling of all components from them.

PubMed

Zhang, Wenxuan; Xu, Chengjian; He, Wenzhi; Li, Guangming; Huang, Juwen

2018-02-01

The wide use of lithium ion batteries (LIBs) has brought great numbers of discarded LIBs, which has become a common problem facing the world. In view of the deleterious effects of spent LIBs on the environment and the contained valuable materials that can be reused, much effort in many countries has been made to manage waste LIBs, and many technologies have been developed to recycle waste LIBs and eliminate environmental risks. As a review article, this paper introduces the situation of waste LIB management in some developed countries and in China, and reviews separation technologies of electrode components and refining technologies of LiCoO 2 and graphite. Based on the analysis of these recycling technologies and the structure and components characteristics of the whole LIB, this paper presents a recycling strategy for all components from obsolete LIBs, including discharge, dismantling, and classification, separation of electrode components and refining of LiCoO 2 /graphite. This paper is intended to provide a valuable reference for the management, scientific research, and industrial implementation on spent LIBs recycling, to recycle all valuable components and reduce the environmental pollution, so as to realize the win-win situation of economic and environmental benefits.

What do we know about metal recycling rates?

USGS Publications Warehouse

Graedel, T.E.; Allwood, J.; Birat, J.-P.; Buchert, M.; Hageluken, C.; Reck, B.K.; Sibley, S.F.; Sonnemann, G.

2011-01-01

The recycling of metals is widely viewed as a fruitful sustainability strategy, but little information is available on the degree to which recycling is actually taking place. This article provides an overview on the current knowledge of recycling rates for 60 metals. We propose various recycling metrics, discuss relevant aspects of recycling processes, and present current estimates on global end-of-life recycling rates (EOL-RR; i.e., the percentage of a metal in discards that is actually recycled), recycled content (RC), and old scrap ratios (OSRs; i.e., the share of old scrap in the total scrap flow). Because of increases in metal use over time and long metal in-use lifetimes, many RC values are low and will remain so for the foreseeable future. Because of relatively low efficiencies in the collection and processing of most discarded products, inherent limitations in recycling processes, and the fact that primary material is often relatively abundant and low-cost (which thereby keeps down the price of scrap), many EOL-RRs are very low: Only for 18 metals (silver, aluminum, gold, cobalt, chromium, copper, iron, manganese, niobium, nickel, lead, palladium, platinum, rhenium, rhodium, tin, titanium, and zinc) is the EOL-RR above 50% at present. Only for niobium, lead, and ruthenium is the RC above 50%, although 16 metals are in the 25% to 50% range. Thirteen metals have an OSR greater than 50%. These estimates may be used in considerations of whether recycling efficiencies can be improved; which metric could best encourage improved effectiveness in recycling; and an improved understanding of the dependence of recycling on economics, technology, and other factors. ?? 2011 by Yale University.

Picking up Clues from the Discard Pile (Stereo)

NASA Technical Reports Server (NTRS)

2008-01-01

As NASA's Phoenix Mars Lander excavates trenches, it also builds piles with most of the material scooped from the holes. The piles, like this one called 'Caterpillar,' provide researchers some information about the soil.

On Aug. 24, 2008, during the late afternoon of the 88th Martian day after landing, Phoenix's Surface Stereo Imager took separate exposures through its left eye and right eye that have been combined into this stereo view. The image appears three dimensional when seen through red-blue glasses.

This conical pile of soil is about 10 centimeters (4 inches) tall. The sources of material that the robotic arm has dropped onto the Caterpillar pile have included the 'Dodo' and ''Upper Cupboard' trenches and, more recently, the deeper 'Stone Soup' trench.

Observations of the pile provide information, such as the slope of the cone and the textures of the soil, that helps scientists understand properties of material excavated from the trenches.

For the Stone Soup trench in particular, which is about 18 centimeters (7 inches) deep, the bottom of the trench is in shadow and more difficult to observe than other trenches that Phoenix has dug. The Phoenix team obtained spectral clues about the composition of material from the bottom of Stone Soup by photographing Caterpillar through 15 different filters of the Surface Stereo Imager when the pile was covered in freshly excavated material from the trench.

The spectral observation did not produce any sign of water-ice, just typical soil for the site. However, the bigger clumps do show a platy texture that could be consistent with elevated concentration of salts in the soil from deep in Stone Soup. The team chose that location as the source for a soil sample to be analyzed in the lander's wet chemistry laboratory, which can identify soluble salts in the soil.

The Phoenix Mission is led by the University of Arizona, Tucson, on behalf of NASA. Project management of the mission is by NASA's Jet Propulsion Laboratory, Pasadena, Calif. Spacecraft development is by Lockheed Martin Space Systems, Denver.

Picking up Clues from the Discard Pile

NASA Technical Reports Server (NTRS)

2008-01-01

As NASA's Phoenix Mars Lander excavates trenches, it also builds piles with most of the material scooped from the holes. The piles, like this one called 'Caterpillar,' provide researchers some information about the soil.

On Aug. 24, 2008, during the late afternoon of the 88th Martian day after landing, Phoenix's Surface Stereo Imager took separate exposures through red, green and blue filters that have been combined into this approximately true-color image.

This conical pile of soil is about 10 centimeters (4 inches) tall. The sources of material that the robotic arm has dropped onto the Caterpillar pile have included the 'Dodo' and ''Upper Cupboard' trenches and, more recently, the deeper 'Stone Soup' trench.

Observations of the pile provide information, such as the slope of the cone and the textures of the soil, that helps scientists understand properties of material excavated from the trenches.

For the Stone Soup trench in particular, which is about 18 centimeters (7 inches) deep, the bottom of the trench is in shadow and more difficult to observe than other trenches that Phoenix has dug. The Phoenix team obtained spectral clues about the composition of material from the bottom of Stone Soup by photographing Caterpillar through 15 different filters of the Surface Stereo Imager when the pile was covered in freshly excavated material from the trench.

The spectral observation did not produce any sign of water-ice, just typical soil for the site. However, the bigger clumps do show a platy texture that could be consistent with elevated concentration of salts in the soil from deep in Stone Soup. The team chose that location as the source for a soil sample to be analyzed in the lander's wet chemistry laboratory, which can identify soluble salts in the soil.

The Phoenix Mission is led by the University of Arizona, Tucson, on behalf of NASA. Project management of the mission is by NASA's Jet Propulsion Laboratory, Pasadena, Calif. Spacecraft development is by Lockheed Martin Space Systems, Denver.

Impacts of policy and market incentives for solid waste recycling in Dhaka, Bangladesh

DOE Office of Scientific and Technical Information (OSTI.GOV)

Matter, Anne; Swisscontact: Swiss Foundation for Technical Cooperation, South Asian Regional Office, House No. 19, Road No. 11, Baridhara, Dhaka 1212; Ahsan, Mehedi

Highlights: • Bangladesh’s industry and population are growing rapidly, producing more urban waste. • Recycling reduces the solid waste management burden of Municipalities. • A wide array of informal and formal actors is involved in collection and recycling. • Demand for recycled materials and renewable energy creates market incentives. • Policy incentives exist, but they only reach the formal industry. - Abstract: Solid waste mismanagement in Dhaka, Bangladesh, illustrates a well-known market failure which can be summarized as: waste is a resource in the wrong place. Inorganic materials such as plastic or paper can be used to feed the demandmore » for recycled materials in the industrial sector. Organic materials can be converted and used in the nutrient-starved agricultural sector which is currently heavily depending on chemical fertilizers. They are also a feedstock to generate renewable energy in the form of biogas for this energy-starved country relying on diminishing natural gas reserves and increasing import of coal. Reality however does not capitalize on this potential; instead the waste is a burden for municipal authorities who spend large portions of their budgets attempting to transport it out of the city for discharge into landfills. The major part of these materials still remains uncollected in the residential areas and is discarded indiscriminately in open spaces, polluting the residents’ living environment including water, soil and air resources, in the city and beyond. Bangladeshi authorities have, to some extent, recognized this market failure and have developed policies to encourage the development of waste recycling activities. It is also important to note that this market failure is only partial: a large, mostly informal recycling sector has developed in Bangladesh, focusing on inorganic recyclables of market value. The fact that this sector remains largely informal means that these actors perceive significant barriers to formalization. Comparatively, the organic waste recycling sector is less driven by market mechanisms. Competition from chemical fertilizers and fossil fuels is fierce and hinders the development of market opportunities for compost and renewable energy. Nevertheless commercial production of compost and biogas from organic municipal waste is formalized and benefiting from policy incentives.« less

Stem cells from fetal membranes and amniotic fluid: markers for cell isolation and therapy.

PubMed

Pozzobon, Michela; Piccoli, Martina; De Coppi, Paolo

2014-06-01

Stem cell therapy is in constant need of new cell sources to conceive regenerative medicine approaches for diseases that are still without therapy. Scientists drew the attention toward amniotic membrane and amniotic fluid stem cells, since these sources possess many advantages: first of all as cells can be extracted from discarded foetal material it is inexpensive, secondly abundant stem cells can be obtained and finally, these stem cell sources are free from ethical considerations. Many studies have demonstrated the differentiation potential in vitro and in vivo toward mesenchymal and non-mesenchymal cell types; in addition the immune-modulatory properties make these cells a good candidate for allo- and xenotransplantation. This review offers an overview on markers characterisation and on the latest findings in pre-clinical or clinical setting of the stem cell populations isolated from these sources.

New device architecture of a thermoelectric energy conversion for recovering low-quality heat

NASA Astrophysics Data System (ADS)

Kim, Hoon; Park, Sung-Geun; Jung, Buyoung; Hwang, Junphil; Kim, Woochul

2014-03-01

Low-quality heat is generally discarded for economic reasons; a low-cost energy conversion device considering price per watt, /W, is required to recover this waste heat. Thin-film based thermoelectric devices could be a superior alternative for this purpose, based on their low material consumption; however, power generated in conventional thermoelectric device architecture is negligible due to the small temperature drop across the thin film. To overcome this challenge, we propose new device architecture, and demonstrate approximately 60 Kelvin temperature differences using a thick polymer nanocomposite. The temperature differences were achieved by separating the thermal path from the electrical path; whereas in conventional device architecture, both electrical charges and thermal energy share same path. We also applied this device to harvest body heat and confirmed its usability as an energy conversion device for recovering low-quality heat.

Ceramic waste form production and development at ANL-West.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Battisti, T. J.; Goff, K. M.; Bateman, K. J.

2002-08-21

Argonne National Laboratory has developed a method to stabilize spent electrolyte salt discarded from electrorefiners (ER) used to treat spent nuclear fuel. The salt is stabilized in a ceramic using a pressureless consolidation technique. The starting material is zeolite 4A which is used as the host for the fission product and actinide rich salt. Glass frit is added to the salt loaded zeolite before processing to act as a binder. The zeolite 4A is converted to sodalite during processing via pressureless consolidation. This process differs from one used in the past that employed a hot isostatic press. Ceramic is createdmore » at 925 C and atmospheric pressure instead of the high pressures used in hot isostatic pressing. Process flow sheets, off-gas test results, processing equipment, and leech test results are presented.« less

Automated dredging and disposal alternatives management system (ADDAMS). Environmental effects of dredging. Technical note

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

This technical note describes the current capabilities and availability of the Automated Dredging and Disposal Alternatives Management System (ADDAMS). The technical note replaces the earlier Technical Note EEDP-06-12, which should be discarded. Planning, design, and management of dredging and dredged material disposal projects often require complex or tedious calculations or involve complex decision-making criteria. In addition, the evaluations often must be done for several disposal alternatives or disposal sites. ADDAMS is a personal computer (PC)-based system developed to assist in making such evaluations in a timely manner. ADDAMS contains a collection of computer programs (applications) designed to assist in managingmore » dredging projects. This technical note describes the system, currently available applications, mechanisms for acquiring and running the system, and provisions for revision and expansion.« less

Behavior of urban residents toward the discarding of waste electrical and electronic equipment: a case study in Baoding, China.

PubMed

Li, Jinhui; Liu, Lili; Ren, Junshu; Duan, Huabo; Zheng, Lixia

2012-11-01

The volume of waste electrical and electronic equipment (WEEE) is growing rapidly worldwide, making its management difficult; therefore, this should be improved as a matter of urgency. WEEE includes both essential household appliances [including televisions, refrigerators, and washing machines; but not air conditioners, where the consumption mode is more like information, communication and technology (ICT)] ICT equipment (also called high-tech household appliances). In the present study, Baoding, a medium-sized, prefecture-level city in north central China with a population of 11 million, including 1.1 million urban residents, was selected as a representative city for an investigation of recycling behaviors. A valid sample size of 346 households in Baoding was investigated, and categorized into various income and educational levels. The results showed that the major reason for discarding WEEE was malfunction of the appliance, accounting for 52% of disposals. Surveyed households with either high income or good education were more likely to consume high-tech household appliances, attracted by advanced technology, versatile functions or flexibility of use. Personal computer ownership rates were highest in households with a high income and good education-1.2 and 0.9 per home respectively. WEEE was most often sold to peddlers or hawkers from where the WEEE flowed into the second-hand market to be refurbished or repaired, and then re-sold. However, 56.3% of residents in the college community were in support of charging consumers for disposal and 61.7% were in support of including a disposal surcharge in the purchase price of new products-a percentage approximately three times that for high-income residents. Thus, high educational level appears to be currently the most important factor in raising the potential of a household's willingness to pay for WEEE treatment cost. The findings of this study can be used to develop sound recycling systems for WEEE in mainland China.

Index of NACA Technical Publications: June, 1955 - June, 1956

NASA Technical Reports Server (NTRS)

1956-01-01

This Index of NACA Technical Publications covers those NACA research reports issued in the period of June 1955 through June 1956. It is the fifth supplement to the basic 1919-1949 Index. The res ear c h reports issued prior to June 1955 which have been declassified since that date have also been included. In addition, current announcement of newly declassified materials is regularly made in the NACA Research Abstracts and Reclassification Notice. The arrangement of the present Index follows that of its predecessors: (1) A listing of the subject categories by numerical classifications, (2) a chronological listing of the NACA research reports under each subject category, (3) an aIphabe ic a I index to the subject categories, and (4) an author index. An Explanatory Chart on page iii may be helpful in identifying references to NACA research reports encountered in the literature. Entries included herein duplicate in part the information of the index cards furnished with the individual research reports. Recipients maintaining card fiIes may wish to discard those index cards on hand for unclassified research reports issued during the June 1955-June 1956 period. Newly available research reports are currently announced in the NACA Research Abstracts and Reclassification Notice and are normally available for a period of five years after announcement. Most of the older research reports (those issued prior to May 1951) are thus available on a "loan only" basis within the United States

CudaChain: an alternative algorithm for finding 2D convex hulls on the GPU.

PubMed

Mei, Gang

2016-01-01

This paper presents an alternative GPU-accelerated convex hull algorithm and a novel S orting-based P reprocessing A pproach (SPA) for planar point sets. The proposed convex hull algorithm termed as CudaChain consists of two stages: (1) two rounds of preprocessing performed on the GPU and (2) the finalization of calculating the expected convex hull on the CPU. Those interior points locating inside a quadrilateral formed by four extreme points are first discarded, and then the remaining points are distributed into several (typically four) sub regions. For each subset of points, they are first sorted in parallel; then the second round of discarding is performed using SPA; and finally a simple chain is formed for the current remaining points. A simple polygon can be easily generated by directly connecting all the chains in sub regions. The expected convex hull of the input points can be finally obtained by calculating the convex hull of the simple polygon. The library Thrust is utilized to realize the parallel sorting, reduction, and partitioning for better efficiency and simplicity. Experimental results show that: (1) SPA can very effectively detect and discard the interior points; and (2) CudaChain achieves 5×-6× speedups over the famous Qhull implementation for 20M points.

Using phase for radar scatterer classification

NASA Astrophysics Data System (ADS)

Moore, Linda J.; Rigling, Brian D.; Penno, Robert P.; Zelnio, Edmund G.

2017-04-01

Traditional synthetic aperture radar (SAR) systems tend to discard phase information of formed complex radar imagery prior to automatic target recognition (ATR). This practice has historically been driven by available hardware storage, processing capabilities, and data link capacity. Recent advances in high performance computing (HPC) have enabled extremely dense storage and processing solutions. Therefore, previous motives for discarding radar phase information in ATR applications have been mitigated. First, we characterize the value of phase in one-dimensional (1-D) radar range profiles with respect to the ability to correctly estimate target features, which are currently employed in ATR algorithms for target discrimination. These features correspond to physical characteristics of targets through radio frequency (RF) scattering phenomenology. Physics-based electromagnetic scattering models developed from the geometrical theory of diffraction are utilized for the information analysis presented here. Information is quantified by the error of target parameter estimates from noisy radar signals when phase is either retained or discarded. Operating conditions (OCs) of signal-tonoise ratio (SNR) and bandwidth are considered. Second, we investigate the value of phase in 1-D radar returns with respect to the ability to correctly classify canonical targets. Classification performance is evaluated via logistic regression for three targets (sphere, plate, tophat). Phase information is demonstrated to improve radar target classification rates, particularly at low SNRs and low bandwidths.

Functional, bioactive and antigenicity properties of blue whiting protein hydrolysates: effect of enzymatic treatment and degree of hydrolysis.

PubMed

García-Moreno, Pedro J; Pérez-Gálvez, Raúl; Espejo-Carpio, F Javier; Ruiz-Quesada, Cristina; Pérez-Morilla, Ana I; Martínez-Agustín, Olga; Guadix, Antonio; Guadix, Emilia M

2017-01-01

Fish discards represent an important under-utilisation of marine resources. This study evaluated the up-grading of the protein fraction of blue whiting (Micromesistius poutassou) discards by the production of fish protein hydrolysates (FPHs) exhibiting functional, antioxidant, angiotensin-I converting enzyme (ACE)-inhibitory and antigenicity properties. FPHs with low DH (4%) showed better emulsifying, foaming and oil binding capacities, particularly those obtained using only trypsin. FPHs with DH 4% exhibited also the stronger antioxidant activity, especially the one obtained using only subtilisin (IC 50 = 1.36 mg protein mL -1 ). The presence of hydrophobic residues at the C-terminal of the FPH produced using subtilisin also led to the stronger ACE-inhibitory activity. However, FPHs with high DH (12%), which implies a higher proportion of short peptides, was required to enhance ACE-inhibition (IC 50 = 172 µg protein mL -1 ). The antigenic levels of the FPH were also reduced with DH independently of the enzymatic treatment. Nevertheless, the highest degradation of fish allergens (e.g. parvalbumin) was also obtained when using only subtilisin. These results suggest that added-value products for food applications can be produced from the protein fraction of discards. © 2016 Society of Chemical Industry. © 2016 Society of Chemical Industry.

Ecological metrics of biomass removed by three methods of purse-seine fishing for tunas in the eastern tropical Pacific Ocean.

PubMed

Gerrodette, Tim; Olson, Robert; Reilly, Stephen; Watters, George; Perrin, William

2012-04-01

An ecosystem approach to fisheries management is a widely recognized goal, but describing and measuring the effects of a fishery on an ecosystem is difficult. Ecological information on the entire catch (all animals removed, whether retained or discarded) of both species targeted by the fishery and nontarget species (i.e., bycatch) is required. We used data from the well-documented purse-seine fishery for tunas (Thunnus albacares, T. obesus, and Katsuwonus pelamis) in the eastern tropical Pacific Ocean to examine the fishery's ecological effects. Purse-seine fishing in the eastern tropical Pacific is conducted in 3 ways that differ in the amount and composition of target species and bycatch. The choice of method depends on whether the tunas are swimming alone (unassociated sets), associated with dolphins (dolphin sets), or associated with floating objects (floating-object sets). Among the fishing methods, we compared catch on the basis of weight, number of individuals, trophic level, replacement time, and diversity. Floating-object sets removed 2-3 times as much biomass as the other 2 methods, depending on how removal was measured. Results of previous studies suggest the ecological effects of floating-object sets are thousands of times greater than the effects of other methods, but these results were derived from only numbers of discarded animals. Management of the fishery has been driven to a substantial extent by a focus on reducing bycatch, although discards are currently 4.8% of total catch by weight, compared with global averages of 7.5% for tuna longline fishing and 30.0% for midwater trawling. An ecosystem approach to fisheries management requires that ecological effects of fishing on all animals removed by a fishery, not just bycatch or discarded catch, be measured with a variety of metrics. ©2012 Society for Conservation Biology.

Facile synthesis of carbon dot and residual carbon nanobeads: Implications for ion sensing, medicinal and biological applications.

PubMed

Gaddam, Rohit Ranganathan; Mukherjee, Sudip; Punugupati, Neelambaram; Vasudevan, D; Patra, Chitta Ranjan; Narayan, Ramanuj; Vsn Kothapalli, Raju

2017-04-01

Synthesis of carbon dots (Cdots) via chemical route involves disintegration of carbon materials into nano-domains, wherein, after extraction of Cdots, the remaining carbon material is discarded. The present work focuses on studying even the leftover carbon residue namely, carbon nanobeads (CNBs) as an equally important material for applications on par with that of carbon dot. It employs oxidative treatment of carbonised gum olibanum resin (GOR) to produce the carbons namely Cdots and CNBs (as the residue). The Cdots (~5-10nm) exhibit blue-green fluorescence with an optical absorption at ~300nm unlike the CNBs (40-50nm) which fail to exhibit fluorescence. The fluorescence behaviour exhibited by Cdots were utilized for heavy metal ion sensing of Pb 2+ , Hg 2+ and Cd 2+ ions in aqueous media. Interestingly, both Cdots and CNBs are biocompatible to normal cell lines but cytotoxic to cancer cell lines, observed during several in vitro experiments (cell viability assay, cell cycle assay, apoptosis assay, ROS determination assay, caspase-9 activity assay). Additionally, Cdots exhibit bright green fluorescence in B16F10 cells. The Cdots and CNB's demonstrate multifunctional activities (sensor, cellular imaging and cancer therapy) in biomedical applications. Copyright © 2016 Elsevier B.V. All rights reserved.

Investigation on removal of malachite green using EM based compost as adsorbent.

PubMed

Bhagavathi Pushpa, T; Vijayaraghavan, J; Sardhar Basha, S J; Sekaran, V; Vijayaraghavan, K; Jegan, J

2015-08-01

The discarded materials from different sources can be utilized as effective materials in wastewater remediation. This proposed study was aimed mainly to investigate the possibility of Effective Microorganisms based compost (EMKC), which is derived from the kitchen solid waste, as a non-conventional low cost adsorbent for the removal of malachite green from aqueous solution. Batch experiments were carried out to evaluate the optimum operating parameters like pH (2-9), initial dye concentration (50-1000mg/L), adsorbent particle size (0.6-2.36mm) and adsorbent dosage (2-12g/L). EMKC recorded maximum uptake of 136.6mg/g of MG at pH 8, initial dye concentration 1000mg/L, adsorbent particle size 1.18mm and adsorbent dosage 4g/L. Two and three parameter adsorption models were employed to describe experimental biosorption isotherm data. The results revealed that the Sips model resulted in better fit than other models. The pseudo-first and -second order models were applied to describe kinetic data, of which the pseudo-second order described experimental data better with high correlation coefficient. This investigation suggested that EMKC could be an effective and low cost material for the removal of malachite green dye from aqueous solution. Copyright © 2015 Elsevier Inc. All rights reserved.

Binding of iron, zinc, and lead ions from aqueous solution by shea butter (Butyrospermun Parkii) seed husks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Eromosele, I.C.; Otitolaye, O.O.

1994-08-01

Several workers have reported on the potential use of agricultural products as substrates for the removal of metal ions from aqueous solutions. These studies demonstrated that considerable amounts of metal ions can be removed from aqueous solutions by cellulosic materials. The merit in the use of the latter is their relative abundance and cheapness compared to conventional materials for the removal of toxic metal ions from waste-waters. In some of the studies, chemical modification of cellulosic materials significantly enhanced their ion-binding properties, providing greater flexibility in their applications to a wide range of heavy metal ions. Shea butter plant (Butyrospermunmore » Parkii) normally grows in the wild within the guinea-savana zone of Nigeria. The seeds are a rich source of edible oils and the husks are usually discarded. The husk is thus available in abundance and, hence, there is reason to examine its ion-binding properties for its possible application in the removal of toxic metal ions from industrial waste-waters. This paper reports on preliminary studies of the sorption of iron, zinc and lead ions from aqueous solution by modified and unmodified shea butter seed husks. 8 refs., 5 figs., 1 tab.« less

Photocatalytic air purifiers for indoor air: European standard and pilot room experiments.

PubMed

Costarramone, N; Cantau, C; Desauziers, V; Pécheyran, C; Pigot, T; Lacombe, S

2017-05-01

At the European level (CEN/TC386), some efforts are currently devoted to new standards for comparing the efficiency of commercial photocatalytic material/devices in various application fields. Concerning prototype or commercial indoor photocatalytic air purifiers designed for volatile organic compounds (VOC) abatement, the methodology is based on a laboratory airtight chamber. The photocatalytic function is demonstrated by the mineralization of a mixture of five VOCs. Experimental data were obtained for four selected commercial devices and three commercial materials: drop of VOC concentration, but also identification of secondary species (with special attention to formaldehyde), mineralization rates, and Clean Air Delivery Rate (CADR). With two efficient air purifiers, these laboratory experiments were compared to the results in two experimental rooms (35-40 m 3 ) where air pollution was introduced through wooden floor and furniture. The systems' ageing was also studied. The safety of the commercial products was also assessed by the determination of nanoparticle release. Standardized tests are useful to rank photocatalytic air purifiers and passive materials and to discard inefficient ones. A good correlation between the standard experiments and the experimental room experiments was found, even if in the latter case, the concentration of lower weight VOCs drops less quickly than that of heavier VOCs.

Plutonium: Advancing our Understanding to Support Sustainable Nuclear Fuel Cycles

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lines, Amanda M.; Adami, Susan R.; Casella, Amanda

With Global energy needs increasing, real energy solutions to meet demands now, are needed. Fossil fuels are not an ideal candidate to meet these needs because of their negative impact on the environment. Renewables such as wind and solar have huge potential, but still need major technological advancements (particularly in the area of battery storage) before they can effectively meet growing world needs. The best option for meeting large energy needs without a large carbon footprint is nuclear energy. Of course, nuclear energy can face a fair amount of opposition and concern. However, through modern engineering and science many ofmore » these concerns can now be addressed. Many safety concerns can be met by engineering advancements, but perhaps the biggest area of concern is what to do with the used nuclear fuel after it is removed from the reactor. Currently the United States (and several other countries) utilize an open fuel cycle, meaning fuel is only used once and then discarded. It should be noted that fuel coming out of a reactor has utilized approximately 1% of the total energy that could be produced by the uranium in the fuel rod. The answer here is to close the fuel cycle and recycle the nuclear materials. By reprocessing used nuclear fuel, all the U can be repurposed without requiring disposal. The various fission products can be removed and either discarded (hugely reduced waste volume) or more reasonably, utilized in specialty reactors to make more energy or needed research/medical isotopes. While reprocessing technology is currently advanced enough to meet energy needs, completing research to improve and better understand these techniques is still needed. Better understanding behavior of fission products is one area of important research. Despite it being discovered over 75 years ago, plutonium is still an exciting element to study because of the complex solution chemistry it exhibits. In aqueous solutions Pu can exist simultaneously in multiple oxidation states, including 3+, 4+, and 6+. It also readily forms a variety of metal-ligand complexes depending on solution pH and available ligands. Understanding of the behavior of Pu in solution remains an important area of research today, with relevance to developing sustainable nuclear fuel cycles, minimizing its impact on the environment, and detecting and preventing the spread of nuclear weapons technology.« less

A revision of Plasmopara penniseti, with implications for the host range of the downy mildews with pyriform haustoria.

PubMed

Thines, Marco; Göker, Markus; Oberwinkler, Franz; Spring, Otmar

2007-12-01

Plasmopara penniseti is the sole member of the genus Plasmopara parasitic to Poaceae, after the genus Viennotia had been described to accommodate Plasmopara oplismeni. Morphological, ultrastructural, and molecular phylogenetic data indicate that Plasmopara penniseti is not closely related to the generic type, and it is, therefore, transferred to the newly described genus Poakatesthia. The view that the genera of downy mildews with pyriform to vesicular haustoria (Basidiophora, Benua, Bremia, Paraperonospora, Plasmopara, Plasmoverna, and Protobremia) include species parasitic to Poaceae has to be discarded. All of these genera are apparently restricted to dicotyledonous hosts.

Person-Locator System Based On Wristband Radio Transponders

NASA Technical Reports Server (NTRS)

Mintz, Frederick W.; Blaes, Brent R.; Chandler, Charles W.

1995-01-01

Computerized system based on wristband radio frequency (RF), passive transponders is being developed for use in real-time tracking of individuals in custodial institutions like prisons and mental hospitals. Includes monitoring system that contains central computer connected to low-power, high-frequency central transceiver. Transceiver connected to miniature transceiver nodes mounted unobtrusively at known locations throughout the institution. Wristband transponders embedded in common hospital wristbands. Wristbands tamperproof: each contains embedded wire loop which, when broken or torn off and discarded, causes wristband to disappear from system, thus causing alarm. Individuals could be located in a timely fashion at relatively low cost.

Technical assessment of discarded tires gasification as alternative technology for electricity generation.

PubMed

Machin, Einara Blanco; Pedroso, Daniel Travieso; de Carvalho, João Andrade

2017-10-01

Concern about contamination associated with the disposal of tires has led to the search for technologies to reuse discarded tires, which include the use of Tire Derived Fuel (TDF) as fuel in advanced thermal-conversion processes, this allows the energy use of these wastes at affordable costs and reduces the environmental impact on scrap tires disposal. A theoretical assessment of the technical viability of TDF gasification for electric and thermal power generation, from the producer gas combustion in an internal combustion engine and in a gas turbine, was performed. The combustion of producer gas derived from the gasification of TDF in an internal combustion engine driving a generator (ICE-G) appears as the more efficient route for electricity generation when compared with the efficiency obtained with the use of gas turbine (GT-G). A higher global efficiency, considering the electric and thermal generation efficiency can be expected with the use of TDF producer gas in GT-G, where is expected an overall efficiency of 77.49%. The assessment shows that is possible produces up to 7.67MJ and 10.62MJ of electric and thermal energy per kilogram of TDF gasified using an ICE-G and up to 6.06MJ and 13.03MJ of electric and thermal energy respectively per kilogram of gasified TDF using a GT-G. Copyright © 2017 Elsevier Ltd. All rights reserved.

Boiler: lossy compression of RNA-seq alignments using coverage vectors

PubMed Central

Pritt, Jacob; Langmead, Ben

2016-01-01

We describe Boiler, a new software tool for compressing and querying large collections of RNA-seq alignments. Boiler discards most per-read data, keeping only a genomic coverage vector plus a few empirical distributions summarizing the alignments. Since most per-read data is discarded, storage footprint is often much smaller than that achieved by other compression tools. Despite this, the most relevant per-read data can be recovered; we show that Boiler compression has only a slight negative impact on results given by downstream tools for isoform assembly and quantification. Boiler also allows the user to pose fast and useful queries without decompressing the entire file. Boiler is free open source software available from github.com/jpritt/boiler. PMID:27298258

Dual kidney transplants from adult marginal donors successfully expand the limited deceased donor organ pool.

PubMed

Stratta, Robert J; Farney, Alan C; Orlando, Giuseppe; Farooq, Umar; Al-Shraideh, Yousef; Palanisamy, Amudha; Reeves-Daniel, Amber; Doares, William; Kaczmorski, Scott; Gautreaux, Michael D; Iskandar, Samy S; Hairston, Gloria; Brim, Elizabeth; Mangus, Margaret; El-Hennawy, Hany; Khan, Muhammad; Rogers, Jeffrey

2016-04-01

The need to expand the organ donor pool remains a formidable challenge in kidney transplantation (KT). The use of expanded criteria donors (ECDs) represents one approach, but kidney discard rates are high because of concerns regarding overall quality. Dual KT (DKT) may reduce organ discard and optimize the use of kidneys from marginal donors. We conducted a single-center retrospective review of outcomes in adult recipients of DKTs from adult marginal deceased donors (DD) defined by limited renal functional capacity. If the calculated creatinine clearance in an adult DD was <65 mL/min, then the kidneys were transplanted as a DKT. Over 11.5 yr, 72 DKTS were performed including 45 from ECDs, 17 from donation after cardiac death (DCD) donors, and 10 from standard criteria donors (SCD). Mean adult DD and recipient ages were both 60 yr, including 29 DDs and 26 recipients ≥65 yr of age. Mean pre-DKT waiting and dialysis vintage times were 12 months and 25 months, respectively. Actual patient and graft survival rates were 84.7% and 70.8%, respectively, with a mean follow-up of 58 months. One yr and death-censored graft survival rates were 90% and 80%, respectively. Outcomes did not differ by DD category, recipient age, or presence of delayed graft function (DGF). Eleven patients died at a mean of 32 months post-DKT (eight with functioning grafts) and 13 other patients experienced graft losses at a mean of 33 months. The incidence of DGF was 25%; there were two cases (2.8%) of primary non-function. Mean length of initial hospital stay was 7.2 d. Mean serum creatinine and glomerular filtration rate levels at 12 and 24 months were 1.5 and 53 and 1.5 mg/dL and 51 mL/min/1.73 m(2) , respectively. DKT graft survival and function were superior to concurrent single ECD and similar to concurrent SCD KTs. Two patients underwent successful kidney retransplantation, so the dialysis-free rate in surviving patients was 87%. The proportion of total renal function transplanted from adult DD to DKT recipients was 77% compared to 56% for patients receiving single KTs. Dual kidney transplantation using kidneys from adult marginal DDs that otherwise might be discarded offer a viable option to counteract the growing shortage of acceptable single kidneys. Excellent medium-term outcomes can be achieved and waiting times can be reduced in a predominantly older recipient population. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Engineering Behavior and Characteristics of Wood Ash and Sugarcane Bagasse Ash

PubMed Central

Grau, Francisco; Choo, Hyunwook; Hu, Jong Wan; Jung, Jongwon

2015-01-01

Biomasses are organic materials that are derived from any living or recently-living structure. Plenty of biomasses are produced nationwide. Biomasses are mostly combusted and usually discarded or disposed of without treatment as biomass ashes, which include wood and sugarcane bagasse ashes. Thus, recycling or treatment of biomass ashes leads to utilizing the natural materials as an economical and environmental alternative. This study is intended to provide an environmental solution for uncontrolled disposal of biomass ashes by way of recycling the biomass ash and replacing the soils in geotechnical engineering projects. Therefore, in this study, characteristic tests of wood and sugarcane bagasse ashes that are considered the most common biomass ashes are conducted. The test of chemical compositions of biomass ashes is conducted using energy dispersive X-ray spectroscopy (EDS), and Scanning Electron Microscope (SEM), and heavy metal analysis is also conducted. Engineering behaviors including hydraulic conductivity, constrained modulus and shear modulus are examined. Also, coal fly ash Class C is used in this study for comparison with biomass ashes, and Ottawa 20/30 sands containing biomass ashes are examined to identify the soil replacement effect of biomass ashes. The results show that the particle sizes of biomass ashes are halfway between coal fly ash Class C and Ottawa 20/30 sand, and biomass ashes consist of a heterogeneous mixture of different particle sizes and shapes. Also, all heavy metal concentrations were found to be below the US Environmental Protection Agency (EPA) maximum limit. Hydraulic conductivity values of Ottawa 20/30 sand decrease significantly when replacing them with only 1%–2% of biomass ashes. While both the constrained modulus and shear modulus of biomass ashes are lower than Ottawa 20/30 sand, those of mixtures containing up to 10% biomass ashes are little affected by replacing the soils with biomass ashes. PMID:28793611

Lithic technological responses to Late Pleistocene glacial cycling at Pinnacle Point Site 5-6, South Africa

PubMed Central

Brown, Kyle S.; Oestmo, Simen; Pereira, Telmo; Ranhorn, Kathryn L.; Schoville, Benjamin J.; Marean, Curtis W.

2017-01-01

There are multiple hypotheses for human responses to glacial cycling in the Late Pleistocene, including changes in population size, interconnectedness, and mobility. Lithic technological analysis informs us of human responses to environmental change because lithic assemblage characteristics are a reflection of raw material transport, reduction, and discard behaviors that depend on hunter-gatherer social and economic decisions. Pinnacle Point Site 5–6 (PP5-6), Western Cape, South Africa is an ideal locality for examining the influence of glacial cycling on early modern human behaviors because it preserves a long sequence spanning marine isotope stages (MIS) 5, 4, and 3 and is associated with robust records of paleoenvironmental change. The analysis presented here addresses the question, what, if any, lithic assemblage traits at PP5-6 represent changing behavioral responses to the MIS 5-4-3 interglacial-glacial cycle? It statistically evaluates changes in 93 traits with no a priori assumptions about which traits may significantly associate with MIS. In contrast to other studies that claim that there is little relationship between broad-scale patterns of climate change and lithic technology, we identified the following characteristics that are associated with MIS 4: increased use of quartz, increased evidence for outcrop sources of quartzite and silcrete, increased evidence for earlier stages of reduction in silcrete, evidence for increased flaking efficiency in all raw material types, and changes in tool types and function for silcrete. Based on these results, we suggest that foragers responded to MIS 4 glacial environmental conditions at PP5-6 with increased population or group sizes, ‘place provisioning’, longer and/or more intense site occupations, and decreased residential mobility. Several other traits, including silcrete frequency, do not exhibit an association with MIS. Backed pieces, once they appear in the PP5-6 record during MIS 4, persist through MIS 3. Changing paleoenvironments explain some, but not all temporal technological variability at PP5-6. PMID:28355257

Lithic technological responses to Late Pleistocene glacial cycling at Pinnacle Point Site 5-6, South Africa.

PubMed

Wilkins, Jayne; Brown, Kyle S; Oestmo, Simen; Pereira, Telmo; Ranhorn, Kathryn L; Schoville, Benjamin J; Marean, Curtis W

2017-01-01

There are multiple hypotheses for human responses to glacial cycling in the Late Pleistocene, including changes in population size, interconnectedness, and mobility. Lithic technological analysis informs us of human responses to environmental change because lithic assemblage characteristics are a reflection of raw material transport, reduction, and discard behaviors that depend on hunter-gatherer social and economic decisions. Pinnacle Point Site 5-6 (PP5-6), Western Cape, South Africa is an ideal locality for examining the influence of glacial cycling on early modern human behaviors because it preserves a long sequence spanning marine isotope stages (MIS) 5, 4, and 3 and is associated with robust records of paleoenvironmental change. The analysis presented here addresses the question, what, if any, lithic assemblage traits at PP5-6 represent changing behavioral responses to the MIS 5-4-3 interglacial-glacial cycle? It statistically evaluates changes in 93 traits with no a priori assumptions about which traits may significantly associate with MIS. In contrast to other studies that claim that there is little relationship between broad-scale patterns of climate change and lithic technology, we identified the following characteristics that are associated with MIS 4: increased use of quartz, increased evidence for outcrop sources of quartzite and silcrete, increased evidence for earlier stages of reduction in silcrete, evidence for increased flaking efficiency in all raw material types, and changes in tool types and function for silcrete. Based on these results, we suggest that foragers responded to MIS 4 glacial environmental conditions at PP5-6 with increased population or group sizes, 'place provisioning', longer and/or more intense site occupations, and decreased residential mobility. Several other traits, including silcrete frequency, do not exhibit an association with MIS. Backed pieces, once they appear in the PP5-6 record during MIS 4, persist through MIS 3. Changing paleoenvironments explain some, but not all temporal technological variability at PP5-6.

The Impact of Flight Hardware Scavenging on Space Logistics

NASA Technical Reports Server (NTRS)

Oeftering, Richard C.

2011-01-01

For a given fixed launch vehicle capacity the logistics payload delivered to the moon may be only roughly 20 percent of the payload delivered to the International Space Station (ISS). This is compounded by the much lower flight frequency to the moon and thus low availability of spares for maintenance. This implies that lunar hardware is much more scarce and more costly per kilogram than ISS and thus there is much more incentive to preserve hardware. The Constellation Lunar Surface System (LSS) program is considering ways of utilizing hardware scavenged from vehicles including the Altair lunar lander. In general, the hardware will have only had a matter of hours of operation yet there may be years of operational life remaining. By scavenging this hardware the program, in effect, is treating vehicle hardware as part of the payload. Flight hardware may provide logistics spares for system maintenance and reduce the overall logistics footprint. This hardware has a wide array of potential applications including expanding the power infrastructure, and exploiting in-situ resources. Scavenging can also be seen as a way of recovering the value of, literally, billions of dollars worth of hardware that would normally be discarded. Scavenging flight hardware adds operational complexity and steps must be taken to augment the crew s capability with robotics, capabilities embedded in flight hardware itself, and external processes. New embedded technologies are needed to make hardware more serviceable and scavengable. Process technologies are needed to extract hardware, evaluate hardware, reconfigure or repair hardware, and reintegrate it into new applications. This paper also illustrates how scavenging can be used to drive down the cost of the overall program by exploiting the intrinsic value of otherwise discarded flight hardware.

Non-Heart-Beating Donor Program: Results After 3 Years of Experience.

PubMed

Martin-Villen, L; Revuelto-Rey, J; Aldabo-Pallas, T; Correa-Chamorro, E; Gallego-Corpa, A; Ruiz Del Portal-Ruiz Granados, P; Roncero-Rodriguez, M A; Egea-Guerrero, J J

2015-11-01

Non-heart-beating donation (NHBD) is a useful way to obtain organs and tissues. Therefore, since 2012 we have had an NHBD protocol in the metropolitan area of Seville. The aim of this work was to present the results obtained after 3 years of program. Prospective observational study carried out from 2012 to 2014. We included all patients with an extrahospitalary sudden death who did not survive despite cardiopulmonary resuscitation, becoming a potential donors (PD). Variables included number of consultations, PD, allowed donor (AD), real donor (RD), and family or legal refusals; minutes of out-hospital care, in-hospital care, cannulation, and perfusion of the RD; and number of organs and tissues removed and viable proportion. Nonallowed donors were grouped according to the discarding cause. We received 97 consultations, of which 40 were performed as PD. Of these, 24 were AD (60%) and 22 RD (55%). There were only 2 family refusals. In 2012, 10 patients were donors, 5 in 2013, and 7 in 2014. The out-hospital median time was 71 (interquartile range [IQR] 60-76) minutes, in-hospital 29 (26-34) minutes, cannulation 28 (24-33) minutes, and perfusion 135 (105-177) minutes. Eighteen tissues and 43 organs were extracted, of which 32 were implanted (75%), with kidneys (96%) being more frequent. Nonallowed donors numbered 12 in 2012, 4 in 2013, and 1 in 2014, and out-hospital causes were the most frequent discard reason. NHBD is a useful program in our city with a low refusal rate (8%), an average of 1.45 organs per donor, and kidney the most frequent organ. Copyright © 2015 Elsevier Inc. All rights reserved.

An analysis on the fate of a selection of blood products derived from cytomegalovirus-seronegative donors at three tertiary referral hospitals in Australia.

PubMed

Hirani, Rena; Tohidi-Esfahani, Ibrahim; Mondy, Phillip; Irving, David O

2018-03-01

Supply of cytomegalovirus (CMV)-seronegative blood products in Australia is an ongoing challenge. Requests for CMV-negative products are increasing with prediction that the demand will exceed supply by 2019. Clinical information evaluating how these products are being utilized by health providers within Australia is limited. This study aimed to identify indications for use of CMV-negative blood products and gather data to support possible practice change. All CMV-negative products issued to three tertiary Australian hospitals from May 1, 2016, to May 31, 2016, were identified (n = 1219). This equated to 1044 red blood cell units and 175 platelet units. Data were collected on the fate of each unit. Information collected included the indication and urgency of transfusion, reason for discard, product age, and recipient CMV immunoglobulin G status. Of the units issued during the audit period, 32 (2.6%) were discarded by the hospitals. Transfusion data were collected on 411 units. Of these, 136 (33.1%) were transfused to CMV-positive recipients, in most cases for hematology indications, and 67 units (16.3%) were transfused to CMV-negative requiring recipients. A total of 144 (35%) CMV-negative units were selected based on their irradiation status. Other reasons for the selection of CMV-negative units included product close to expiry (n = 134, 32.6%) or specific patient phenotype requirements (n = 31, 7.5%). In this study, the majority of CMV-negative blood products were not used for CMV-negative requiring recipients. Alterations to inventory management would be advantageous to ensure continued supply for CMV-negative requiring recipients. © 2017 AABB.

Clinical aspects of influenza A(H1N1)pdm09 cases reported during the pandemic in Brazil, 2009-2010

PubMed Central

Rossetto, Érika Valeska; Luna, Expedito José de Albuquerque

2015-01-01

ABSTRACT Objective: To describe the clinical aspects of cases of influenza A(H1N1)pdm09 in Brazil. Methods: A descriptive study of cases reported in Sistema de Informação de Agravos de Notificação (SINAN), 2009-2010. Results: As the final classification, we obtained 53,797 (56.79%) reported cases confirmed as a new influenza virus subtype, and 40,926 (43.21%) cases discarded. Fever was the most common sign, recorded in 99.74% of the confirmed and 98.92% of the discarded cases. Among the confirmed cases, the presence of comorbidities was reported in 32.53%, and in 38.29% of the discarded cases. The case fatality rate was 4.04%; 3,267 pregnant women were confirmed positive for influenza A new viral subtype and 2,730 of them were cured. The case fatality rate of pregnant women was 6.88%. Conclusion: The findings suggested concern of the health system with pregnant women, and patients with comorbidities and quality of care may have favored a lower mortality. We recommend that, when caring for patients with severe respiratory symptoms, with comorbidities, or pregnant women, health professionals should consider the need for hospital care, as these factors make up a worse prognosis of infection by the pandemic influenza virus. PMID:26154537

A natural food ingredient based on ergosterol: optimization of the extraction from Agaricus blazei, evaluation of bioactive properties and incorporation in yogurts.

PubMed

Corrêa, Rúbia C G; Barros, Lillian; Fernandes, Ângela; Sokovic, Marina; Bracht, Adelar; Peralta, Rosane M; Ferreira, Isabel C F R

2018-03-01

In recent years, mycosterols have emerged as potential functional ingredients for the development of sterol-enriched food products and dietary supplements. Agaricus blazei is a mushroom rich in bioactive compounds. For commercial purposes, their fruiting bodies must obey rigid morphological criteria. Those not conforming to these criteria are usually discarded, although this does not mean impairment of their content in bioactives. The aim of the present work was to propose the use of commercially discarded A. blazei fruiting bodies for obtaining an extract rich in ergosterol as a fortifier ingredient for yogurts. For extraction, the Soxhlet technology was used and the highest ergosterol yield (around 12%) was achieved in the 5 th cycle, yielding 58.53 ± 1.72 µg of ergosterol per 100 g of mushroom (dry weight). The ergosterol rich extract presented notable antioxidant and antimicrobial properties, besides showing no hepatotoxicity. When added to the yogurts it significantly enhanced their antioxidant properties. Furthermore, it did not significantly alter the nutritional or the individual fatty acid profiles of the final dairy products. Thus, A. blazei fruiting bodies that do not conform to the commercial requirements of the market and are normally discarded could be exploited for obtaining a natural high added-value food additive, following the circular bioeconomy concept.

Optimal Run Strategies in Monte Carlo Iterated Fission Source Simulations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Romano, Paul K.; Lund, Amanda L.; Siegel, Andrew R.

2017-06-19

The method of successive generations used in Monte Carlo simulations of nuclear reactor models is known to suffer from intergenerational correlation between the spatial locations of fission sites. One consequence of the spatial correlation is that the convergence rate of the variance of the mean for a tally becomes worse than O(N–1). In this work, we consider how the true variance can be minimized given a total amount of work available as a function of the number of source particles per generation, the number of active/discarded generations, and the number of independent simulations. We demonstrate through both analysis and simulationmore » that under certain conditions the solution time for highly correlated reactor problems may be significantly reduced either by running an ensemble of multiple independent simulations or simply by increasing the generation size to the extent that it is practical. However, if too many simulations or too large a generation size is used, the large fraction of source particles discarded can result in an increase in variance. We also show that there is a strong incentive to reduce the number of generations discarded through some source convergence acceleration technique. Furthermore, we discuss the efficient execution of large simulations on a parallel computer; we argue that several practical considerations favor using an ensemble of independent simulations over a single simulation with very large generation size.« less

An Interval Type-2 Neural Fuzzy System for Online System Identification and Feature Elimination.

PubMed

Lin, Chin-Teng; Pal, Nikhil R; Wu, Shang-Lin; Liu, Yu-Ting; Lin, Yang-Yin

2015-07-01

We propose an integrated mechanism for discarding derogatory features and extraction of fuzzy rules based on an interval type-2 neural fuzzy system (NFS)-in fact, it is a more general scheme that can discard bad features, irrelevant antecedent clauses, and even irrelevant rules. High-dimensional input variable and a large number of rules not only enhance the computational complexity of NFSs but also reduce their interpretability. Therefore, a mechanism for simultaneous extraction of fuzzy rules and reducing the impact of (or eliminating) the inferior features is necessary. The proposed approach, namely an interval type-2 Neural Fuzzy System for online System Identification and Feature Elimination (IT2NFS-SIFE), uses type-2 fuzzy sets to model uncertainties associated with information and data in designing the knowledge base. The consequent part of the IT2NFS-SIFE is of Takagi-Sugeno-Kang type with interval weights. The IT2NFS-SIFE possesses a self-evolving property that can automatically generate fuzzy rules. The poor features can be discarded through the concept of a membership modulator. The antecedent and modulator weights are learned using a gradient descent algorithm. The consequent part weights are tuned via the rule-ordered Kalman filter algorithm to enhance learning effectiveness. Simulation results show that IT2NFS-SIFE not only simplifies the system architecture by eliminating derogatory/irrelevant antecedent clauses, rules, and features but also maintains excellent performance.

Valorization of postharvest sweet cherry discard for the development of dehydrated fruit ingredients: compositional, physical, and mechanical properties.

PubMed

Franceschinis, Lorena; Sette, Paula; Salvatori, Daniela; Schebor, Carolina

2018-04-20

Sweet cherries are an excellent source of phenolic compounds, which may contribute to a healthy diet. The objective of this work was to generate dehydrated ingredients from postharvest discard of sweet cherries. Four dried ingredients were obtained from fresh sweet cherry discard (Lapins var.) using an osmotic dehydration pretreatment and freeze drying or air drying. The ingredients showed an important phenolic contribution (2.8-6.6 g gallic acid kg -1 of product) and preserved the natural color of the fruit to a great extent. Freeze-dried ingredients were less hygroscopic than air-dried ones, and presented with a softer texture. All the ingredients were in a supercooled state at room temperature (T g range: -23.0 to -18.8 °C). Sugar infusion pretreatment caused a decrease in water sorption capacity and molecular mobility; it also reduced the initial rehydration rate. Relevant differences in nutritional and structural characteristics of the ingredients were observed depending on the processing method used. These ingredients could be incorporated into different processed foods, such as snacks, cereal mixtures, cereal bars, and bakery and confectionery products. Air-dried control ingredients presented better nutritional qualities and air-dried sweet cherries with sugar infusion pretreatment could be appropriate ingredients for applications where sweet flavor and slow rehydration rate are required. © 2018 Society of Chemical Industry. © 2018 Society of Chemical Industry.

Impacts of discarded coffee waste on human and environmental health.

PubMed

Fernandes, A S; Mello, F V C; Thode Filho, S; Carpes, R M; Honório, J G; Marques, M R C; Felzenszwalb, I; Ferraz, E R A

2017-07-01

Coffee is one of the most widely consumed beverages throughout the world. So far, many studies have shown the properties of coffee beverages, but little is known about its impacts on human and environmental health from its discard in the environment. So, the present work aims to investigate the mutagenic, genotoxic, cytotoxic and ecotoxic effects of leached (LE) and solubilized (SE) extracts from coffee waste, simulating the disposal of this residue in landfills and via sewage systems, respectively. Chemical analyses were also carried out. LE and SE induced mutagenicity in the TA98 Salmonella strain with and without exogenous metabolization (S9). In the TA100 only SE induced mutagenicity, what was observed without S9. An increase in the frequency of micronuclei was observed in HepG2 cell line after 3 and 24h of exposure to both extracts. No cytotoxic effects were observed in HepG2 cells by WST-1 assay. The EC50 values for the LE and SE were 1.5% and 11.26% for Daphnia similis, 0.12% and 1.39% for Ceriodaphnia dubia and 6.0% and 5.5% for Vibrio fischeri, respectively. Caffeine and several transition metals were found in both extracts. Coffee waste discarded in the environment may pose a risk to human and environmental health, since this compound can cause DNA damage and present toxicity to aquatic organisms. Copyright © 2017 Elsevier Inc. All rights reserved.

Method for recovering and using lignin in adhesive resins by extracting demethylated lignin

DOEpatents

Schroeder, Herbert A.

1991-01-01

Lignin, or a lignin derived material, which has been significantly demethylated (e.g., the demethylated lignin found in the raffinate produced as a by-product of dimethyl sulfide production which can be carried out using the spent liquor from wood pulping operations) can be isolated by a process wherein an organic solvent is added to a lignin-containing aqueous solution. The organic solvent is typically a polar, and at least a partially water-immiscible substance such as, for example, ethyl acetate. The resulting lignin-containing aqueous solution/organic solvent mixture is acidified to produce a water layer which is discarded and an organic solvent layer which contains the demethylated lignin. Upon its recovery, the demethylated lignin is preferably dried and stored until it is used (along with an alkali, an aldehyde and an adhesive filler) in compounding an adhesive of the type generally used in the manufacture of plywood.

Jahn-Teller versus quantum effects in the spin-orbital material LuVO 3

DOE PAGES

Skoulatos, M.; Toth, S.; Roessli, B.; ...

2015-04-13

In this article, we report on combined neutron and resonant x-ray scattering results, identifying the nature of the spin-orbital ground state and magnetic excitations in LuVO 3 as driven by the orbital parameter. In particular, we distinguish between models based on orbital-Peierls dimerization, taken as a signature of quantum effects in orbitals, and Jahn-Teller distortions, in favor of the latter. In order to solve this long-standing puzzle, polarized neutron beams were employed as a prerequisite in order to solve details of the magnetic structure, which allowed quantitative intensity analysis of extended magnetic-excitation data sets. The results of this detailed studymore » enabled us to draw definite conclusions about the classical versus quantum behavior of orbitals in this system and to discard the previous claims about quantum effects dominating the orbital physics of LuVO 3 and similar systems.« less

Inferring demographic structure with moccasin size data from the Promontory Caves, Utah.

PubMed

Billinger, Michael; Ives, John W

2015-01-01

The moccasin assemblage Julian Steward recovered from the Promontory caves in 1930-31 provides a novel example in which material culture can be used to understand the structure of an AD thirteenth century population. Several studies shed light on the relationship between shoe size, foot size, and stature. We develop an anthropometric model for understanding the composition of the Promontory Cave population by using moccasin size as a proxy for foot size. We then predict the stature of the individual who would have worn a moccasin. Stature is closely related to age for children, subadults and adult males. Although there are predictable sex and age factors biasing moccasin discard practices, moccasin dimensions suggest a relatively large proportion of children and subadults occupied the Promontory caves. This bison and antelope hunting population appears to have thrived during its stay on Promontory Point. © 2014 Wiley Periodicals, Inc.

Two-Step Cycle for Producing Multiple Anodic Aluminum Oxide (AAO) Films with Increasing Long-Range Order

PubMed Central

2017-01-01

Nanoporous anodic aluminum oxide (AAO) membranes are being used for an increasing number of applications. However, the original two-step anodization method in which the first anodization is sacrificial to pre-pattern the second is still widely used to produce them. This method provides relatively low throughput and material utilization as half of the films are discarded. An alternative scheme that relies on alternating anodization and cathodic delamination is demonstrated that allows for the fabrication of several AAO films with only one sacrificial layer thus greatly improving total aluminum to alumina yield. The thickness for which the cathodic delamination performs best to yield full, unbroken AAO sheets is around 85 μm. Additionally, an image analysis method is used to quantify the degree of long-range ordering of the unit cells in the AAO films which was found to increase with each successive iteration of the fabrication cycle. PMID:28630684

Two-Step Cycle for Producing Multiple Anodic Aluminum Oxide (AAO) Films with Increasing Long-Range Order.

PubMed

Choudhary, Eric; Szalai, Veronika

2016-01-01

Nanoporous anodic aluminum oxide (AAO) membranes are being used for an increasing number of applications. However, the original two-step anodization method in which the first anodization is sacrificial to pre-pattern the second is still widely used to produce them. This method provides relatively low throughput and material utilization as half of the films are discarded. An alternative scheme that relies on alternating anodization and cathodic delamination is demonstrated that allows for the fabrication of several AAO films with only one sacrificial layer thus greatly improving total aluminum to alumina yield. The thickness for which the cathodic delamination performs best to yield full, unbroken AAO sheets is around 85 μm. Additionally, an image analysis method is used to quantify the degree of long-range ordering of the unit cells in the AAO films which was found to increase with each successive iteration of the fabrication cycle.

Decidual vascular changes in early pregnancy as a marker for intrauterine pregnancy.

PubMed

Lichtig, C; Korat, A; Deutch, M; Brandes, J M

1988-09-01

Endometrial vascular changes similar to atherosclerosis of toxemia of pregnancy were described and graded in 217 consecutive endometrial biopsies of known early intrauterine pregnancy. Severe vascular changes were found in 23.5% of cases. Control material consisting of endometrial biopsies of patients with known cases of tubal ectopic pregnancy and various non-pregnancy menstrual disorders showed minimal or no changes except in one case. A parallel study of Aria-Stella phenomenon in 110 cases of uterine pregnancy showed significant changes in only 3.6% of patients. It is obvious that in these cases of positive Arias-Stella findings, the possibility of an extrauterine pregnancy could not be discarded on histologic grounds alone. The authors suggest the use of the vascular changes of the more severe histologic degree as described in this article as a positive or strongly suspicious marker for intrauterine pregnancy whenever this is needed.

Process for magnetic beneficiating petroleum cracking catalyst

DOEpatents

Doctor, R.D.

1993-10-05

A process is described for beneficiating a particulate zeolite petroleum cracking catalyst having metal values in excess of 1000 ppm nickel equivalents. The particulate catalyst is passed through a magnetic field in the range of from about 2 Tesla to about 5 Tesla generated by a superconducting quadrupole open-gradient magnetic system for a time sufficient to effect separation of said catalyst into a plurality of zones having different nickel equivalent concentrations. A first zone has nickel equivalents of about 6,000 ppm and greater, a second zone has nickel equivalents in the range of from about 2000 ppm to about 6000 ppm, and a third zone has nickel equivalents of about 2000 ppm and less. The zones of catalyst are separated and the second zone material is recycled to a fluidized bed of zeolite petroleum cracking catalyst. The low nickel equivalent zone is treated while the high nickel equivalent zone is discarded. 1 figures.

Process for magnetic beneficiating petroleum cracking catalyst

DOEpatents

Doctor, Richard D.

1993-01-01

A process for beneficiating a particulate zeolite petroleum cracking catalyst having metal values in excess of 1000 ppm nickel equivalents. The particulate catalyst is passed through a magnetic field in the range of from about 2 Tesla to about 5 Tesla generated by a superconducting quadrupole open-gradient magnetic system for a time sufficient to effect separation of said catalyst into a plurality of zones having different nickel equivalent concentrations. A first zone has nickel equivalents of about 6,000 ppm and greater, a second zone has nickel equivalents in the range of from about 2000 ppm to about 6000 ppm, and a third zone has nickel equivalents of about 2000 ppm and less. The zones of catalyst are separated and the second zone material is recycled to a fluidized bed of zeolite petroleum cracking catalyst. The low nickel equivalent zone is treated while the high nickel equivalent zone is discarded.

Social and economic importance of textile reuse and recycling in Brazil

NASA Astrophysics Data System (ADS)

Baruque-Ramos, J.; Amaral, M. C.; Laktim, M. C.; Santos, H. N.; Araujo, F. B.; Zonatti, W. F.

2017-10-01

Brazil is an important world producer of textiles. However, this industrial activity, combined with additional import and trade, generates millions of tons of textile scraps, unsold clothing and discarded post-consumption garments. There is a great potential for the recycling and reuse industry in the context of solidarity and circular economy. The present study aimed to present examples in Brazil related to waste reduction, reuse and recycling of textiles in the context of solidary economy. In this way, some representative initiatives, from Sao Paulo, Minas Gerais and Rio de Janeiro states are presented and discussed based on these principles and approaching responsible lifestyles and environmental awareness and the refusal to waste resources in general. The main socioenvironmental benefits are related to the training of labor and local income generation, the population’s awareness of consumption patterns, saving of natural resources and raw materials, and mitigation of environmental impacts.

Amnion: a potent graft source for cell therapy in stroke.

PubMed

Yu, Seong Jin; Soncini, Maddalena; Kaneko, Yuji; Hess, David C; Parolini, Ornella; Borlongan, Cesar V

2009-01-01

Regenerative medicine is a new field primarily based on the concept of transplanting exogenous or stimulating endogenous stem cells to generate biological substitutes and improve tissue functions. Recently, amnion-derived cells have been reported to have multipotent differentiation ability, and these cells have attracted attention as a novel cell source for cell transplantation therapy. Cells isolated from amniotic membrane can differentiate into all three germ layers, have low immunogenicity and anti-inflammatory function, and do not require the destruction of human embryos for their isolation, thus circumventing the ethical debate commonly associated with the use of human embryonic stem cells. Accumulating evidence now suggests that the amnion, which had been discarded after parturition, is a highly potent transplant material in the field of regenerative medicine. In this report, we review the current progress on the characterization of MSCs derived from the amnion as a remarkable transplantable cell population with therapeutic potential for multiple CNS disorders, especially stroke.

Fashion garment manufacturing - FGM and cyclability theory

NASA Astrophysics Data System (ADS)

Mendes, F. D.; Dos Santos, M. C. L.

2017-10-01

This article, derived from an ongoing research, presents the possibilities of reducing the inappropriate disposal of textile residues generated by the fabric cutting sector of the Fashion Garment Manufacturing (FGM). The raw material used is very varied, resulting in a large number of productive processes. FGM produces clothing that has as its main features a short life cycle, a high rate of diversification and differentiation, and small production batches, resulting in few similar parts. The production process is differentiated according to the characteristics of the fabric and the look of the garment. During the production process, at least 10% of textile waste is generated during the cutting process, which is constantly discarded in an inadequate way. The Cyclability theory is researched aiming at the possibility of reduction in the generation of waste and elimination of inappropriate disposal. The case study presents the action research carried out in three small Brazilian companies to study the applicability of the Cyclability theory.

7 CFR 319.56-2 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-01-01

... above the soil surface. Administrator. The Administrator of the Animal and Plant Health Inspection... purposes. Plant litter and debris. Discarded or decaying organic matter; detached leaves, twigs, or stems...

7 CFR 319.56-2 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-01-01

... above the soil surface. Administrator. The Administrator of the Animal and Plant Health Inspection... purposes. Plant litter and debris. Discarded or decaying organic matter; detached leaves, twigs, or stems...

7 CFR 319.56-2 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... above the soil surface. Administrator. The Administrator of the Animal and Plant Health Inspection... purposes. Plant litter and debris. Discarded or decaying organic matter; detached leaves, twigs, or stems...

7 CFR 319.56-2 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-01-01

... above the soil surface. Administrator. The Administrator of the Animal and Plant Health Inspection... purposes. Plant litter and debris. Discarded or decaying organic matter; detached leaves, twigs, or stems...

7 CFR 319.56-2 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-01-01

... above the soil surface. Administrator. The Administrator of the Animal and Plant Health Inspection... purposes. Plant litter and debris. Discarded or decaying organic matter; detached leaves, twigs, or stems...

Overview of Proposed ISRU Technology Development

NASA Technical Reports Server (NTRS)

Linne, Diane; Sanders, Jerry; Starr, Stan; Suzuki, Nantel; O'Malley, Terry

2016-01-01

ISRU involves any hardware or operation that harnesses and utilizes in-situ resources (natural and discarded) to create products and services for robotic and human exploration: Assessment of physical, mineral chemical, and volatile water resources, terrain, geology, and environment (orbital and local). Production of replacement parts, complex products, machines, and integrated systems from feedstock derived from one or more processed resources. Civil engineering, infrastructure emplacement, and structure construction using materials produced from in situ resources. Radiation shields, landing pads, roads, berms, habitats, etc. Generation and storage of electrical, thermal, and chemical energy with in situ derived materials. Solar arrays, thermal wadis, chemical batteries, etc. ISRU is a disruptive capability: Enables more affordable exploration than todays paradigm. Allows more sustainable architectures to be developed. Understand the ripple effect in the other Exploration Elements: MAV: propellant selection, higher rendezvous altitude (higher DV capable with ISRU propellants). EDL: significantly reduces required landed mass. Life Support: reduce amount of ECLSS closure, reduce trash mass carried through propulsive maneuvers. Power: ISRU drives electrical requirements, reactant and regeneration for fuel cells for landers, rovers, and habitat backup. Every Exploration Element except ISRU has some flight heritage (power, propulsion, habitats, landers, life support, etc.) ISRU will require a flight demonstration mission on Mars before it will be included in the critical path. Mission needs to be concluded at least 10 years before first human landed mission to ensure lessons learned can be incorporated into final design. ISRU Formulation team has generated a (still incomplete) list of over 75 technical questions on more than 40 components and subsystems that need to be answered before the right ISRU system will be ready for this flight demo.

Charitable State-Controlled Foundation Human Tissue and Cell Research: Ethic and Legal Aspects in the Supply of Surgically Removed Human Tissue For Research in the Academic and Commercial Sector in Germany.

PubMed

Thasler, Wolfgang E.; Weiss, Thomas S.; Schillhorn, Kerrin; Stoll, Peter-Tobias; Irrgang, Bernhard; Jauch, Karl-Walter

2003-01-01

Tissue engineering using human cells and tissue has one of the greatest scientific and economical potential in the coming years. There are public concerns during the ongoing discussion about future trends in life sciences and if ethic boundaries might be respected sufficiently in the course of striving for industrial profit and scientific knowledge. Until now, the legal situation of using human tissue material for research is not clear. Accordingly, transparency of action and patients' information are a central component when handling patient material inside and outside of the patient-specific treatment. Whereas in the field of therapeutic use of tissue (e.g. transplantation) there is an emergency situation by the shortage of organs with the risk of the premature death of the potential recipient, this cannot be claimed for tissue donation for research. The basis of every surgical operation is the treatment contract, which places the doctor under obligation to the careful exercise of medical treatment containing the patient's informed consent. This contract only covers the treatment that is intended to cure the patient and the medical measures that are necessary therefor. The further scientific use of body-substances, which are discarded after an operation, are not included. Therefore a personal and independent written enlightenment of the patient and a declaration of informed consent is necessary. Examples of guidelines for tissue supply, Patients information and consent were worked out by theologists, lawyers, scientists and physicians reflecting their practical experience in transplant surgery and liver cell research. As a consequence to cover the ethical and legal aspect of tissue donation in Germany a charitable state-controlled foundation Human Tissue and Cell Research (HTCR) was introduced and established.

Development of a methodology for electronic waste estimation: A material flow analysis-based SYE-Waste Model.

PubMed

Yedla, Sudhakar

2016-01-01

Improved living standards and the share of services sector to the economy in Asia, and the use of electronic equipment is on the rise and results in increased electronic waste generation. A peculiarity of electronic waste is that it has a 'significant' value even after its life time, and to add complication, even after its extended life in its 'dump' stage. Thus, in Indian situations, after its life time is over, the e-material changes hands more than once and finally ends up either in the hands of informal recyclers or in the store rooms of urban dwellings. This character makes it extremely difficult to estimate electronic waste generation. The present study attempts to develop a functional model based on a material flow analysis approach by considering all possible end uses of the material, its transformed goods finally arriving at disposal. It considers various degrees of uses derived of the e-goods regarding their primary use (life time), secondary use (first degree extension of life), third-hand use (second degree extension of life), donation, retention at the respective places (without discarding), fraction shifted to scrap vendor, and the components reaching the final dump site from various end points of use. This 'generic functional model' named SYE-Waste Model, developed based on a material flow analysis approach, can be used to derive 'obsolescence factors' for various degrees of usage of e-goods and also to make a comprehensive estimation of electronic waste in any city/country. © The Author(s) 2015.

Human Factor Investigation of Waste Processing System During the HI-SEAS 4 Month Mars Analog Mission in Support of NASA's Logistic Reduction and Repurposing Project: Trash to Gas

NASA Technical Reports Server (NTRS)

Caraccio, Anne; Hintze, Paul; Miles, John D.

2014-01-01

NASAs Logistics Reduction and Repurposing (LRR) project is a collaborative effort in which NASA is tasked with reducing total logistical mass through reduction, reuse and recycling of various wastes and components of long duration space missions and habitats. Trash to Gas (TtG) is a sub task to LRR with efforts focused on development of a technology that converts wastes generated during long duration space missions into high-value products such as methane, water for life support, raw material production feedstocks, and other energy sources. The reuse of discarded materials is a critical component to reducing overall mission mass. The 120 day Hawaii Space Exploration and Analog Simulation provides a unique opportunity to answer questions regarding crew interface and system analysis for designing and developing future flight-like versions of a TtG system. This paper will discuss the human factors that would affect the design of a TtG or other waste processing systems. An overview of the habitat, utility usage, and waste storage and generation is given. Crew time spent preparing trash for TtG processing was recorded. Gas concentrations were measured near the waste storage locations and at other locations in the habitat. In parallel with the analog mission, experimental processing of waste materials in a TtG reactor was performed in order to evaluate performance with realistic waste materials.

Human Factor Investigation of Waste Processing System During the HI-SEAS 4-month Mars Analog Mission in Support of NASA's Logistic Reduction and Repurposing Project: Trash to Gas

NASA Technical Reports Server (NTRS)

Caraccio, Anne; Hintze, Paul E.; Miles, John D.

2014-01-01

NASA's Logistics Reduction and Repurposing (LRR) project is a collaborative effort in which NASA is tasked with reducing total logistical mass through reduction, reuse and recycling of various wastes and components of long duration space missions and habitats. Trash to Gas (TtG) is a sub task to LRR with efforts focused on development of a technology that converts wastes generated during long duration space missions into high-value products such as methane, water for life support, raw material production feedstocks, and other energy sources. The reuse of discarded materials is a critical component to reducing overall mission mass. The 120 day Hawaii Space Exploration and Analog Simulation provides a unique opportunity to answer questions regarding crew interface and system analysis for designing and developing future flight-like versions of a TtG system. This paper will discuss the human factors that would affect the design of a TtG or other waste processing systems. An overview of the habitat, utility usage, and waste storage and generation is given. Crew time spent preparing trash for TtG processing was recorded. Gas concentrations were measured near the waste storage locations and at other locations in the habitat. In parallel with the analog mission, experimental processing of waste materials in a TtG reactor was performed in order to evaluate performance with realistic waste materials.

Pellet Puzzlers.

ERIC Educational Resources Information Center

Hoots, R. A.

1992-01-01

Presents information on owl's taxonomy, characteristics, and influences on man. Describes owl pellets, which are digestive discards, and explains how they can be used to determine the owl's diet as a science activity. (PR)

21 CFR 520.1628 - Oxfendazole powder and pellets.

Code of Federal Regulations, 2012 CFR

2012-04-01

... small strongyles. (3) Limitations—(i) Powder for suspension. For gravity administration via stomach tube or for positive administration via stomach tube and dose syringe. Discard unused portions of...

21 CFR 520.1628 - Oxfendazole powder and pellets.

Code of Federal Regulations, 2013 CFR

2013-04-01

... small strongyles. (3) Limitations—(i) Powder for suspension. For gravity administration via stomach tube or for positive administration via stomach tube and dose syringe. Discard unused portions of...

21 CFR 520.1628 - Oxfendazole powder and pellets.

Code of Federal Regulations, 2014 CFR

2014-04-01

... small strongyles. (3) Limitations—(i) Powder for suspension. For gravity administration via stomach tube or for positive administration via stomach tube and dose syringe. Discard unused portions of...

40 CFR 63.1595 - List of definitions.

Code of Federal Regulations, 2013 CFR

2013-07-01

..., typically biological, designed to reduce the concentrations of dissolved and colloidal organic matter in... contain dissolved or suspended matter, and that is discarded, discharged, or is being accumulated, stored...

40 CFR 63.1595 - List of definitions.

Code of Federal Regulations, 2014 CFR

2014-07-01

..., typically biological, designed to reduce the concentrations of dissolved and colloidal organic matter in... contain dissolved or suspended matter, and that is discarded, discharged, or is being accumulated, stored...

40 CFR 63.1595 - List of definitions.

Code of Federal Regulations, 2012 CFR

2012-07-01

..., typically biological, designed to reduce the concentrations of dissolved and colloidal organic matter in... contain dissolved or suspended matter, and that is discarded, discharged, or is being accumulated, stored...

Hoarding disorder

MedlinePlus

... of items, gradual buildup of clutter in living spaces and difficulty discarding things are usually the first ... for which there is no immediate need or space. By middle age, symptoms are often severe and ...

21 CFR 520.1628 - Oxfendazole powder and pellets.

Code of Federal Regulations, 2010 CFR

2010-04-01

... small strongyles. (3) Limitations—(i) Powder for suspension. For gravity administration via stomach tube or for positive administration via stomach tube and dose syringe. Discard unused portions of...

21 CFR 520.1628 - Oxfendazole powder and pellets.

Code of Federal Regulations, 2011 CFR

2011-04-01

... small strongyles. (3) Limitations—(i) Powder for suspension. For gravity administration via stomach tube or for positive administration via stomach tube and dose syringe. Discard unused portions of...

Photovoltaic solar panels of crystalline silicon: Characterization and separation.

PubMed

Dias, Pablo Ribeiro; Benevit, Mariana Gonçalves; Veit, Hugo Marcelo

2016-03-01

Photovoltaic panels have a limited lifespan and estimates show large amounts of solar modules will be discarded as electronic waste in a near future. In order to retrieve important raw materials, reduce production costs and environmental impacts, recycling such devices is important. Initially, this article investigates which silicon photovoltaic module's components are recyclable through their characterization using X-ray fluorescence, X-ray diffraction, energy dispersion spectroscopy and atomic absorption spectroscopy. Next, different separation methods are tested to favour further recycling processes. The glass was identified as soda-lime glass, the metallic filaments were identified as tin-lead coated copper, the panel cells were made of silicon and had silver filaments attached to it and the modules' frames were identified as aluminium, all of which are recyclable. Moreover, three different components segregation methods have been studied. Mechanical milling followed by sieving was able to separate silver from copper while chemical separation using sulphuric acid was able to detach the semiconductor material. A thermo gravimetric analysis was performed to evaluate the use of a pyrolysis step prior to the component's removal. The analysis showed all polymeric fractions present degrade at 500 °C. © The Author(s) 2016.

The contemporary cement cycle of the United States

USGS Publications Warehouse

Kapur, A.; Van Oss, H. G.; Keoleian, G.; Kesler, S.E.; Kendall, A.

2009-01-01

A country-level stock and flow model for cement, an important construction material, was developed based on a material flow analysis framework. Using this model, the contemporary cement cycle of the United States was constructed by analyzing production, import, and export data for different stages of the cement cycle. The United States currently supplies approximately 80% of its cement consumption through domestic production and the rest is imported. The average annual net addition of in-use new cement stock over the period 2000-2004 was approximately 83 million metric tons and amounts to 2.3 tons per capita of concrete. Nonfuel carbon dioxide emissions (42 million metric tons per year) from the calcination phase of cement manufacture account for 62% of the total 68 million tons per year of cement production residues. The end-of-life cement discards are estimated to be 33 million metric tons per year, of which between 30% and 80% is recycled. A significant portion of the infrastructure in the United States is reaching the end of its useful life and will need to be replaced or rehabilitated; this could require far more cement than might be expected from economic forecasts of demand for cement. ?? 2009 Springer Japan.

Metal artifact reduction for CT-based luggage screening.

PubMed

Karimi, Seemeen; Martz, Harry; Cosman, Pamela

2015-01-01

In aviation security, checked luggage is screened by computed tomography scanning. Metal objects in the bags create artifacts that degrade image quality. Though there exist metal artifact reduction (MAR) methods mainly in medical imaging literature, they require knowledge of the materials in the scan, or are outlier rejection methods. To improve and evaluate a MAR method we previously introduced, that does not require knowledge of the materials in the scan, and gives good results on data with large quantities and different kinds of metal. We describe in detail an optimization which de-emphasizes metal projections and has a constraint for beam hardening and scatter. This method isolates and reduces artifacts in an intermediate image, which is then fed to a previously published sinogram replacement method. We evaluate the algorithm for luggage data containing multiple and large metal objects. We define measures of artifact reduction, and compare this method against others in MAR literature. Metal artifacts were reduced in our test images, even for multiple and large metal objects, without much loss of structure or resolution. Our MAR method outperforms the methods with which we compared it. Our approach does not make assumptions about image content, nor does it discard metal projections.

Towards tunable and multifunctional interfaces: Multicomponent amorphous alloys and bilayer stacks

NASA Astrophysics Data System (ADS)

Kast, Matthew G.

Controlling the electronic structure and requisite charge transfer at and across interfaces is a grand challenge of materials science. Despite decades of research and numerous successes in the fields microelectronics and photovoltaics much work remains to be done. In many applications, whether they be in microelectronics, photovoltaics or display technology there is a demand for multiple functions at a single interface. Historically, existent materials were either discarded as an option due to known properties or tested with some application based figure of merit in mind. Following this, the quality of the material and/or the preparation of the surface/interface to which the material would be deposited was optimized. As the microelectronics and photovoltaics industries have matured, continued progress (faster, lower power transistors and more efficient, cheaper, abundant solar cells) will require new materials (possibly not previously existent) that are fundamentally better for their application than their highly optimized existent counter parts. The manifestation of this has been seen in the microelectronics field with introduction of hafnium silicates to replace silica (which had previously been monumentally successful) as the gate dielectrics for the most advanced transistors. Continued progress in efficient, cheap, abundant photovoltaics will require similar advances. Advances will be needed in the area of new abundant absorbers that can be deposited cheaply which result in materials with high efficiencies. In addition, selective contacts capable of extracting charge from efficient absorbers with low ohmic losses and low recombination rates will be needed. Presented here are two approaches to the multifunctional interface problem, first the use of amorphous alloys that open up the accessible composition space of thin films significantly and second the use of bilayers that loosen the requirements of a single film at an interface.

Erosive Potential of Cola and Orange Fruit Juice on Tooth Colored Restorative Materials

PubMed Central

Rajavardhan, K; Sankar, AJS; Kumar, MGM; Kumar, KR; Pranitha, K; Kishore, KK

2014-01-01

Background: Erosion is a common condition which manifests due to consumption of high caloric and low pH acidic food stuffs such as carbonated drinks and fruit juices which cause irreversible damage to dental hard tissues and early deterioration of the dental restorations. Aim: The main aim of this study is to evaluate and to compare the erosive potential of carbonated drink (cola) and fruit juice (orange fruit juice) by measuring the surface roughness (Ra) values on two commonly used dental restorative materials. Materials and Methods: A total of 36 specimens each were prepared using both testing materials, compomer (Group I) and giomer (Group II). Six specimens in each group were discarded due to wide variation in pre exposed Ra values and the remaining 30 specimens in each group were further sub divided into 10 samples each according to the testing media used. Immersion regime was followed according to Von Fraunhofer and Rogers. The pre and post immersion surface roughness values were recorded using a profilometer. Results: Both tested materials showed statistically-significant surface erosion (P < 0.01) when exposed to cola and orange fruit juice than the control group (water). Discussion: Compomer showed more surface roughness when compared to giomer when exposed to the three tested media which can be attributed to the variation in filler content, decomposition of resin matrix and fallout of the fillers in composites when exposed to acidic drinks. Other factors responsible for this significant erosion were also discussed. Conclusions: Significant surface changes of the dental restorative materials can take place when exposed to low pH drinks for a prolonged period. PMID:25364590

Battery collection in municipal waste management in Japan: Challenges for hazardous substance control and safety

DOE Office of Scientific and Technical Information (OSTI.GOV)

Terazono, Atsushi, E-mail: terazono@nies.go.jp; Oguchi, Masahiro; Iino, Shigenori

Highlights: • Consumers need to pay attention to the specific collection rules for each type of battery in each municipality in Japan. • 6–10% of zinc carbon and alkaline batteries discarded in Japan currently could be regarded as containing mercury. • Despite announcements by producers and municipalities, only 2.0% of discarded cylindrical dry batteries were insulated. • Batteries made up an average of 4.6% of the total collected small WEEE under the small WEEE recycling scheme in Japan. • Exchangeable batteries were used in almost all of mobile phones, but the removal rate was as low as 22% for mobilemore » phones. - Abstract: To clarify current collection rules of waste batteries in municipal waste management in Japan and to examine future challenges for hazardous substance control and safety, we reviewed collection rules of waste batteries in the Tokyo Metropolitan Area. We also conducted a field survey of waste batteries collected at various battery and small waste electric and electronic equipment (WEEE) collection sites in Tokyo. The different types of batteries are not collected in a uniform way in the Tokyo area, so consumers need to pay attention to the specific collection rules for each type of battery in each municipality. In areas where small WEEE recycling schemes are being operated after the enforcement of the Act on Promotion of Recycling of Small Waste Electrical and Electronic Equipment in Japan in 2013, consumers may be confused about the need for separating batteries from small WEEE (especially mobile phones). Our field survey of collected waste batteries indicated that 6–10% of zinc carbon and alkaline batteries discarded in Japan currently could be regarded as containing mercury. More than 26% of zinc carbon dry batteries currently being discarded may have a lead content above the labelling threshold of the EU Batteries Directive (2006/66/EC). In terms of safety, despite announcements by producers and municipalities about using insulation (tape) on waste batteries to prevent fires, only 2.0% of discarded cylindrical dry batteries were insulated. Our field study of small WEEE showed that batteries made up an average of 4.6% of the total collected small WEEE on a weight basis. Exchangeable batteries were used in almost all of mobile phones, digital cameras, radios, and remote controls, but the removal rate was as low as 22% for mobile phones. Given the safety issues and the rapid changes occurring with mobile phones or other types of small WEEE, discussion is needed among stakeholders to determine how to safely collect and recycle WEEE and waste batteries.« less

Scopolamine Transdermal Patch

MedlinePlus

... the adhesive surface of the patch, the clear plastic protective strip should be peeled off and discarded. ... needed, remove the patch and dispose of it. Wrap the patch in tissue or paper to avoid ...

Ipratropium Oral Inhalation

MedlinePlus

... with the clear end pointing upward. Place the metal canister inside the clear end of the inhaler. ... do not discard it in an incinerator or fire.Unneeded medications should be disposed of in special ...

BanglaLekha-Isolated: A multi-purpose comprehensive dataset of Handwritten Bangla Isolated characters.

PubMed

Biswas, Mithun; Islam, Rafiqul; Shom, Gautam Kumar; Shopon, Md; Mohammed, Nabeel; Momen, Sifat; Abedin, Anowarul

2017-06-01

BanglaLekha-Isolated, a Bangla handwritten isolated character dataset is presented in this article. This dataset contains 84 different characters comprising of 50 Bangla basic characters, 10 Bangla numerals and 24 selected compound characters. 2000 handwriting samples for each of the 84 characters were collected, digitized and pre-processed. After discarding mistakes and scribbles, 1,66,105 handwritten character images were included in the final dataset. The dataset also includes labels indicating the age and the gender of the subjects from whom the samples were collected. This dataset could be used not only for optical handwriting recognition research but also to explore the influence of gender and age on handwriting. The dataset is publicly available at https://data.mendeley.com/datasets/hf6sf8zrkc/2.

Cloth-covered chiropractic treatment tables as a source of allergens and pathogenic microbes.

PubMed

Evans, Marion W; Campbell, Alan; Husbands, Chris; Breshears, Jennell; Ndetan, Harrison; Rupert, Ronald

2008-03-01

Vinyl chiropractic tables have been found to harbor pathogenic bacteria, but wiping with a simple disinfection agent can significantly reduce the risk of bacteria. The aim of this study was to assess the presence of microbes and other allergens or pathogens on cloth chiropractic tables. Cloth-covered tables in a chiropractic college teaching clinic were selected. Samples were taken from the facial piece and hand rests with RODAC plates containing nutrient agar, followed by confirmatory testing when indicated. Numerous microbacteria strains were found, including Staphylococcus aureus and Propionibacterium. Allergen-producing molds, including Candida, were also found. Cloth tables were shown to contain pathogenic microbacteria and allergens. The chiropractic profession should establish an infection control protocol relevant to treatment tables and discard use of cloth-covered treatment tables in this process.

Results of the radiological survey of the Carpenter Steel Facility, Reading, Pennsylvania

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cottrell, W.D.; Carrier, R.F.

1990-07-01

In 1944, experimental uranium-forming work was conducted by Carpenter Technology Corporation at the Carpenter Steel Facility in Reading, Pennsylvania, under contract to the Manhattan Engineer District (MED). The fabrication method, aimed at producing sounder uranium metal and improving the yields of rods from billets, was reportedly soon discarded as unsatisfactory. As part of the Department of Energy's (DOE) efforts to verify the closeout status of facilities under contract to agencies preceding DOE during early nuclear energy development, the site was included in the Formerly Utilized Sites Remedial Action Program (FUSRAP). At the request of DOE, the Measurement Applications and Developmentmore » Group of the Health and Safety Research Division of Oak Ridge National Laboratory performed a radiological assessment survey in July and August 1988. The purpose of the survey was to determine if past operations had deposited radioactive residues in the facility, and whether those residuals were in significant quantities when compared to DOE guidelines. The survey included gamma scanning; direct measurements of alpha activity levels and beta-gamma dose rates; sampling for transferable alpha and beta-gamma residuals on selected surfaces; and sampling of soil, debris and currently used processing materials for radionuclide analysis. All survey results were within DOE FUSRAP guidelines derived to determine the eligibility of a site for remedial action. These guidelines are derived to ensure that unrestricted use of the property will not result in any measurable radiological hazard to the site occupants or the general public. 4 refs., 5 figs., 5 tabs.« less

Innovative resettlement schemes planned for the Numata Dam project

NASA Astrophysics Data System (ADS)

Nakayama, Mikiyasu

2003-10-01

The Numata Dam, planned for the Tone River basin of Gunma Prefecture, was the largest dam construction project ever considered in Japan. This dam construction project, however, did not materialize. The proposal for the Numata Dam was first launched in 1959, at a time when the Tokyo Metropolitan area was mushrooming, both in population and industrial activity. The Numata Dam was supposed to be a prioritized dam construction project to alleviate the then anticipated water shortage in the Tokyo Metropolitan area. The Numata Dam plan experienced fierce opposition from those who would have been obliged to resettle, whereas those in Tokyo and the surrounding metropolitan area welcomed the plan. The major concern of the planned Numata Dam was the number of resettlers, which was then estimated to be around 3000 families. The resettlement plan developed for the Numata Dam included some innovative concepts, which may be applicable even today, for dam construction projects in the developing world. The plan included such ideas as (a) having resettlers share existing farmland with the present owners provided improvements were made to increase productivity, (b) paying rent to resettlers, and (c) establishing the Tone River Development Agency. After more than a decade of debate, both at national and local levels, the Numata Dam project was finally discarded through a decision of the Prime Minister in 1972. The resettlement schemes elaborated for the Numata Dam still appear to be innovative. Such schemes may be applied to projects in the developing world, in particular, in nations that are about to take off with economic development. Copyright

Chemometrics applications in biotechnology processes: predicting column integrity and impurity clearance during reuse of chromatography resin.

PubMed

Rathore, Anurag S; Mittal, Shachi; Lute, Scott; Brorson, Kurt

2012-01-01

Separation media, in particular chromatography media, is typically one of the major contributors to the cost of goods for production of a biotechnology therapeutic. To be cost-effective, it is industry practice that media be reused over several cycles before being discarded. The traditional approach for estimating the number of cycles a particular media can be reused for involves performing laboratory scale experiments that monitor column performance and carryover. This dataset is then used to predict the number of cycles the media can be used at manufacturing scale (concurrent validation). Although, well accepted and widely practiced, there are challenges associated with extrapolating the laboratory scale data to manufacturing scale due to differences that may exist across scales. Factors that may be different include: level of impurities in the feed material, lot to lot variability in feedstock impurities, design of the column housing unit with respect to cleanability, and homogeneity of the column packing. In view of these challenges, there is a need for approaches that may be able to predict column underperformance at the manufacturing scale over the product lifecycle. In case such an underperformance is predicted, the operators can unpack and repack the chromatography column beforehand and thus avoid batch loss. Chemometrics offers one such solution. In this article, we present an application of chemometrics toward the analysis of a set of chromatography profiles with the intention of predicting the various events of column underperformance including the backpressure buildup and inefficient deoxyribonucleic acid clearance. Copyright © 2012 American Institute of Chemical Engineers (AIChE).

Linkage of Maternity Hospital Episode Statistics data to birth registration and notification records for births in England 2005–2014: Quality assurance of linkage of routine data for singleton and multiple births

PubMed Central

2018-01-01

Objectives To quality assure a Trusted Third Party linked data set to prepare it for analysis. Setting Birth registration and notification records from the Office for National Statistics for all births in England 2005–2014 linked to Maternity Hospital Episode Statistics (HES) delivery records by NHS Digital using mothers’ identifiers. Participants All 6 676 912 births that occurred in England from 1 January 2005 to 31 December 2014. Primary and secondary outcome measures Every link between a registered birth and an HES delivery record for the study period was categorised as either the same baby or a different baby to the same mother, or as a wrong link, by comparing common baby data items and valid values in key fields with stepwise deterministic rules. Rates of preserved and discarded links were calculated and which features were more common in each group were assessed. Results Ninety-eight per cent of births originally linked to HES were left with one preserved link. The majority of discarded links were due to duplicate HES delivery records. Of the 4854 discarded links categorised as wrong links, clerical checks found 85% were false-positives links, 13% were quality assurance false negatives and 2% were undeterminable. Births linked using a less reliable stage of the linkage algorithm, births at home and in the London region, and with birth weight or gestational age values missing in HES were more likely to have all links discarded. Conclusions Linkage error, data quality issues, and false negatives in the quality assurance procedure were uncovered. The procedure could be improved by allowing for transposition in date fields, and more discrimination between missing and differing values. The availability of identifiers in the datasets supported clerical checking. Other research using Trusted Third Party linkage should not assume the linked dataset is error-free or optimised for their analysis, and allow sufficient resources for this. PMID:29500200

Use of wastewater ER sludges for the immobilization of heavy metals

DOE Office of Scientific and Technical Information (OSTI.GOV)

Macha, S.; Murray, D.; Urasa, I.T.

1996-10-01

The distribution, mobility, and bioavailability of heavy metals in soils, surface water, and ground water have been of major interest and concern from both environmental and geochemical standpoints. Wastewater sludges represent an important anthropogenic factor whose impact on these processes is not fully understood. In the past, incineration and landfilling were common practices for discarding wastewater sludges. However, as local and state laws governing the disposal of these materials have become more stringent, land application has been used as an alternative. Reported studies have shown that the impact of land application of sludges can vary widely and is influenced bymore » a number of factors, including the source of the sludge; the organic matter content of the sludge; the form in which the sludge is applied; and the prevailing conditions of the receiving soils. It has also been shown that sewage sludge can have solubilizing effects on solid-phase heavy metals, thereby causing geochemical shifts of the insoluble fractions of metals to the more soluble forms. The work presented in this paper utilized synthetic minerals, standard solutions, sludges, and agricultural soils obtained from different sources to determine the mechanisms involved in the mineralization of heavy metals by sludge; the influence of soil conditions; interelemental effects; the influence of natural organic matter; and possible microbial activity that may come into play. Several types of sludge were evaluated for lead binding capacity.« less

Smart Capsules for Lead Removal from Industrial Wastewater.

PubMed

Tylkowski, Bartosz; Jastrząb, Renata

2017-04-10

Ground and especially drinking water could be contaminated by heavy metal ions such as lead and chromium, or the metalloid arsenic, discarded from industrial wastewater. These heavy metal ions are regarded as highly toxic pollutants which could cause a wide range of health problems in case of a long-term accumulation in the body. Thus, there have been many efforts to reduce the concentration of lead ions in effluent wastewater. They have included the establishment of stringent permissible discharge levels and management policies, the application of various pollution-control technologies, and the development of adsorbent materials for lead reduction. According to Science [1] encapsulation, developed approximately 65 years ago, has been defined as a major interdisciplinary research technology. Encapsulation has been used to deliver almost everything from advanced drugs to unique consumer sensory experiences. In this chapter we review the art of encapsulation technology as a potential breakthrough solution for a recyclable removal system for lead ions. Moreover, in order to provide the readers with a comprehensive and in-depth understanding of recent developments and innovative applications in this field, we highlight some remarkable advantages of encapsulation for heavy metal remove, such as simplicity of preparation, applicability for a wide range of selective extractants, large special interfacial area, ability for concentration of metal ions from dilute solutions, and less leakage of harmful components to the environment.

The use of reverse logistics for waste management in a Brazilian grocery retailer.

PubMed

Dias, Karina T S; Braga Junior, Sergio S

2016-01-01

Retail growth is a result of the diversification of departments with the intention to look to consumer's needs and level of demand. Pressed by consumers and by the law, the adoption of environmental preservation practices is becoming stronger among grocery retailers. The objective of this research was to analyse the practices of reverse logistics performed by a retailer and measure the amount of waste generated by each department. To reach the proposed goal, a field research study was conducted to directly observe a grocery retailer in the state of Sao Paulo, Brazil, for a period of 6 months and monitor the amounts of cardboard and plastic discarded by each department. Using the Wuppertal method, the first result observed was that the retailer stopped its monthly production of approximately 20 tonne of biotic and abiotic material, which influence global warming and degradation of the ozone layer. Another result observed with the implementation of reverse logistics, was that the general grocery department mostly used cardboard and plastic. This sector includes products such as food cupboard, drinks, household, health and beauty, and pet articles. The fresh fruit and vegetable department and the meat, chicken and frozen department were increasingly using less plastic and cardboard packaging, increasing the use of returnable and durable packaging and thus promoting sustainability. © The Author(s) 2015.

An Ochered Fossil Marine Shell From the Mousterian of Fumane Cave, Italy

PubMed Central

Peresani, Marco; Vanhaeren, Marian; Quaggiotto, Ermanno; Queffelec, Alain; d’Errico, Francesco

2013-01-01

A scanty but varied ensemble of finds challenges the idea that Neandertal material culture was essentially static and did not include symbolic items. In this study we report on a fragmentary Miocene-Pliocene fossil marine shell, Aspa marginata , discovered in a Discoid Mousterian layer of the Fumane Cave, northern Italy, dated to at least 47.6-45.0 Cal ky BP. The shell was collected by Neandertals at a fossil exposure probably located more than 100 kms from the site. Microscopic analysis of the shell surface identifies clusters of striations on the inner lip. A dark red substance, trapped inside micropits produced by bioeroders, is interpreted as pigment that was homogeneously smeared on the outer shell surface. Dispersive X-ray and Raman analysis identify the pigment as pure hematite. Of the four hypotheses we considered to explain the presence of this object at the site, two (tool, pigment container) are discarded because in contradiction with observations. Although the other two (“manuport”, personal ornament) are both possible, we favor the hypothesis that the object was modified and suspended by a ‘thread’ for visual display as a pendant. Together with contextual and chronometric data, our results support the hypothesis that deliberate transport and coloring of an exotic object, and perhaps its use as pendant, was a component of Neandertal symbolic culture, well before the earliest appearance of the anatomically modern humans in Europe. PMID:23874677

THE GENERATION, USE AND DISPOSAL OF WASTE CRANKCASE OIL IN DEVELOPING COUNTRIES: A CASE FOR KAMPALA DISTRICT, UGANDA

PubMed Central

Ssempebwa, John C.; Carpenter, David O.

2008-01-01

Waste Crankcase Oil (WCO), the oil that is removed from motor engines during an oil change, is frequently discarded into the environment, resulting in pollution of both aquatic and terrestrial ecosystems. In some developing countries, this common hazardous material is not properly managed. In Uganda little is known about its generation, utilization, and disposal. These factors were investigated using in-depth interviews of a sample of mechanics from 379 motor repair garages and 109 fuel stations in the Kampala district. Most garages (94%) and fuel stations (96%) in the study area offered oil-changing services. On average, each garage produced 62 litres, and each fuel station produced 134 litres of WCO per week. In garages 35% was sold, 16% poured on the ground, 18% taken by vehicle owners and 31% given away for free. At fuel stations, 49% was picked by private collectors, 27% sold, 4% poured on the ground, 2% burnt, 13% taken by vehicle owners, and 6% given away for free. Uses of WCO included coating roofing timber and fencing posts, use in timber cutting, marking play grounds, and pest control in animals. Its disposal involved burning, and pouring in the environment. Lack of policy and information for proper handling of WCO contributed to the poor management of WCO exhibited. PMID:18513868

40 CFR 60.111b - Definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... obtained from standard reference texts; or (3) As determined by ASTM D2879-83, 96, or 97 (incorporated by... industrial, commercial, mining or agricultural operations, or from community activities that is discarded or...

[Evaluation of the bacteriologic quality of breast milk in a neonatology service in Belgium].

PubMed

Vervoort, A; Delsat, L; Pieltain, C; De Halleux, V; Carpentier, M; Rigo, J

2007-03-01

Many studies demonstrated that human milk is the recommended source of enteral nutrition in preterm infants providing several benefits with regards to feeding tolerance, immunity and cognitive development However, neurological immaturity and associated clinical conditions prevent them from suckling effectively. Therefore, mother's milk must be expressed, stored and transported to the neonatal unit and could be contaminated. The microbiological quality of human milk was evaluated on each donation to the neonatal intensive care unit of the University of Liege, Belgium from November 1, 2003 to January 31, 2005. In all, 5842 samples from 176 mothers were included in the study. Samples were classified according to the exclusive presence of coagulase negative Staphylococcus and their number (less or more than 104 germs per ml) or to contamination with pathogens. More than 50% of analyzed milks had to be pasteurized (46%; >104 coagulase negative Staphylococcus per ml) or to be discarded (7% pathogen contamination). The incidence of pasteurisation tends to increase during the summer, suggesting a seasonal influence. Maternal profiles were established longitudinally. Among the 60 mothers whose at least one sample had pathogen contamination, 27% had a contamination occurring only during a few days, but 73% had more than 50% of their samples discarded. This study suggest the need to promote the use and the financial support of intrahospital human milk bank units to support the safe use of raw and pasteurised human milk in preterm infants.

76 FR 22385 - Fisheries of the Caribbean; Southeast Data, Assessment, and Review (SEDAR); Public Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-21

... sources for providing information on life history characteristics, catch statistics, discard estimates... people with disabilities. Requests for sign language interpretation or other auxiliary aids should be...

Some Brave New Worlds Are Best Left Uncharted.

ERIC Educational Resources Information Center

Zakariya, Sally Banks

1984-01-01

A critique of the "bandwagon effect" in educational innovation. Many new ideas in the past have seemed promising at first and have caught on quickly, only to be subsequently discarded as "chaff." (TE)

Reusable and disposable cups: An energy-based evaluation

NASA Astrophysics Data System (ADS)

Hocking, Martin B.

1994-11-01

A group of five different types of reusable and disposable hot drink cups have been analyzed in detail with respect to their overall energy costs during fabrication and use. Electricity generating methods and efficiencies have been found to be key factors in the primary energy consumption for the washing of reusable cups and a less important factor in cup fabrication. In Canada or the United States, over 500 or more use cycles, reusable cups are found to have about the same or slightly more energy consumption, use for use, as moulded polystyrene foam cups used once and then discarded. For the same area paper cups used once and discarded are found to consume less fossil fuel energy per use than any of the other cup types examined. Details of this analysis, which could facilitate the comparative assessment of other scenarios, are presented.

Boiler: lossy compression of RNA-seq alignments using coverage vectors.

PubMed

Pritt, Jacob; Langmead, Ben

2016-09-19

We describe Boiler, a new software tool for compressing and querying large collections of RNA-seq alignments. Boiler discards most per-read data, keeping only a genomic coverage vector plus a few empirical distributions summarizing the alignments. Since most per-read data is discarded, storage footprint is often much smaller than that achieved by other compression tools. Despite this, the most relevant per-read data can be recovered; we show that Boiler compression has only a slight negative impact on results given by downstream tools for isoform assembly and quantification. Boiler also allows the user to pose fast and useful queries without decompressing the entire file. Boiler is free open source software available from github.com/jpritt/boiler. © The Author(s) 2016. Published by Oxford University Press on behalf of Nucleic Acids Research.

The Kidney Donor Profile Index (KDPI) of Marginal Donors Allocated by Standardized Pre-Transplant Donor Biopsy Assessment: Distribution and Association with Graft Outcomes

PubMed Central

Gandolfini, I.; Buzio, C.; Zanelli, P.; Palmisano, A.; Cremaschi, E.; Vaglio, A.; Piotti, G.; Melfa, L.; La Manna, G.; Feliciangeli, G.; Cappuccilli, M.; Scolari, M.P.; Capelli, I.; Panicali, L.; Baraldi, O.; Stefoni, S.; Buscaroli, A.; Ridolfi, L.; D'Errico, A.; Cappelli, G.; Bonucchi, D.; Rubbiani, E.; Albertazzi, A.; Mehrotra, A.; Cravedi, P.; Maggiore, U.

2015-01-01

Pre-transplant donor biopsy (PTDB)-based marginal-donor allocation systems to single or dual renal transplantation could increase the use of organs with Kidney Donor Profile Index (KDPI) in the highest range (e.g. >80 or >90), whose discard rate approximates 50% in the US. To test this hypothesis, we retrospectively calculated the KDPI and analyzed the outcomes of 442 marginal kidney transplants (340 single transplants: 278 with a PTDB Remuzzi score <4 [median KDPI:87; interquartile range(IQR):78-94] and 62 with a score =4 [median KDPI:87; IQR:76-93]; 102 dual transplants [median KDPI: 93; IQR:86-96]) and 248 single standard transplant controls [median KDPI:36; IQR:18-51]. PTDB-based allocation of marginal grafts led to a limited discard rate of 15% for kidneys with KDPI of 80-90 and of 37% for kidneys with a KDPI of 91-100. Although 1-year eGFRs were significantly lower in recipients of marginal kidneys (-9.3, -17.9, and -18.8ml/min, for dual transplants, single kidneys with PTDB score <4, and =4, respectively; P<0.001), graft survival (median follow-up 3.3 years) was similar between marginal and standard kidney transplants (hazard ratio: 1.20 [95% confidence interval: 0.80 to 1.79; P=0.38]). In conclusion, PTDB-based allocation allows the safe transplantation of kidneys with KDPI in the highest range that may otherwise be discarded. PMID:25155294

Predicting Liver Transplant Capacity Using Discrete Event Simulation.

PubMed

Toro-Díaz, Hector; Mayorga, Maria E; Barritt, A Sidney; Orman, Eric S; Wheeler, Stephanie B

2015-08-01

The number of liver transplants (LTs) performed in the US increased until 2006 but has since declined despite an ongoing increase in demand. This decline may be due in part to decreased donor liver quality and increasing discard of poor-quality livers. We constructed a discrete event simulation (DES) model informed by current donor characteristics to predict future LT trends through the year 2030. The data source for our model is the United Network for Organ Sharing database, which contains patient-level information on all organ transplants performed in the US. Previous analysis showed that liver discard is increasing and that discarded organs are more often from donors who are older, are obese, have diabetes, and donated after cardiac death. Given that the prevalence of these factors is increasing, the DES model quantifies the reduction in the number of LTs performed through 2030. In addition, the model estimatesthe total number of future donors needed to maintain the current volume of LTs and the effect of a hypothetical scenario of improved reperfusion technology.We also forecast the number of patients on the waiting list and compare this with the estimated number of LTs to illustrate the impact that decreased LTs will have on patients needing transplants. By altering assumptions about the future donor pool, this model can be used to develop policy interventions to prevent a further decline in this lifesaving therapy. To our knowledge, there are no similar predictive models of future LT use based on epidemiological trends. © The Author(s) 2014.

Predicting Liver Transplant Capacity Using Discrete Event Simulation

PubMed Central

Diaz, Hector Toro; Mayorga, Maria; Barritt, A. Sidney; Orman, Eric S.; Wheeler, Stephanie B.

2014-01-01

The number of liver transplants (LTs) performed in the US increased until 2006, but has since declined despite an ongoing increase in demand. This decline may be due in part to decreased donor liver quality and increasing discard of poor quality livers. We constructed a Discrete Event Simulation (DES) model informed by current donor characteristics to predict future LT trends through the year 2030. The data source for our model is the United Network for Organ Sharing database, which contains patient level information on all organ transplants performed in the US. Previous analysis showed that liver discard is increasing and that discarded organs are more often from donors who are older, obese, have diabetes, and donated after cardiac death. Given that the prevalence of these factors is increasing, the DES model quantifies the reduction in the number of LTs performed through 2030. In addition, the model estimates the total number of future donors needed to maintain the current volume of LTs, and the effect of a hypothetical scenario of improved reperfusion technology. We also forecast the number of patients on the waiting list and compare this to the estimated number of LTs to illustrate the impact that decreased LTs will have on patients needing transplants. By altering assumptions about the future donor pool, this model can be used to develop policy interventions to prevent a further decline in this life saving therapy. To our knowledge, there are no similar predictive models of future LT use based on epidemiologic trends. PMID:25391681

Regional variation in bycatches associated with king scallop (Pecten maximus L.) dredge fisheries.

PubMed

Szostek, Claire L; Murray, Lee G; Bell, Ewen; Lambert, Gwladys; Kaiser, Michel J

2017-02-01

The biomass and composition of bycatch from king scallop dredge fisheries was assessed and compared between the English Channel, Cardigan Bay in Wales and around the Isle of Man. Bycatch composition varied significantly at localised, and broad, geographic scales. The mean proportion of scallop dredge bycatch biomass in the English Channel was 19% of total catch biomass. The proportion of bycatch was lower in Cardigan Bay (15%) but notably higher around the Isle of Man (53%). The proportion of individual bycatch species in dredge catches were low, therefore scallop dredging is unlikely to cause a substantial increase the population mortality of individual commercially fished species beyond that caused by the target fisheries for those species, or bycatches of other fisheries. The amount and mortality of organisms left on the seabed in the dredge path was not quantified in this study but should also be considered in management of the fishery. The discard rate of finfish and shellfish of commercial value from the king scallop dredge fishery in the English Channel was between 18 and 100%, with a higher rate of discarding occurring in the eastern English Channel compared to the west. The clear regional differences in bycatch composition and variation in the quantity of discards mean that an area by area approach to managing bycatch species is required in relation to the king scallop dredge fishery. Crown Copyright © 2016. Published by Elsevier Ltd. All rights reserved.

Evaluation of measles and rubella integrated surveillance system in Apulia region, Italy, 3 years after its introduction.

PubMed

Turiac, I A; Fortunato, F; Cappelli, M G; Morea, A; Chironna, M; Prato, Rosa; Martinelli, D

2018-04-01

This study aimed at evaluating the integrated measles and rubella surveillance system (IMRSS) in Apulia region, Italy, from its introduction in 2013 to 30 June 2016. Measles and rubella case reports were extracted from IMRSS. We estimated system sensitivity at the level of case reporting, using the capture-recapture method for three data sources. Data quality was described as the completeness of variables and timeliness of notification as the median-time interval from symptoms onset to initial alert. The proportion of suspected cases with laboratory investigation, the rate of discarded cases and the origin of infection were also computed. A total of 127 measles and four rubella suspected cases were reported to IMRSS and 82 were laboratory confirmed. Focusing our analysis on measles, IMRSS sensitivity was 82% (95% CI: 75-87). Completeness was >98% for mandatory variables and 57% for 'genotyping'. The median-time interval from symptoms onset to initial alert was 4.5 days, with a timeliness of notification of 33% (41 cases reported ⩽48 h). The proportion of laboratory investigation was 87%. The rate of discarded cases was 0.1 per 100 000 inhabitants per year. The origin of infection was identified for 85% of cases. It is concluded that IMRSS provides good quality data and has good sensitivity; still efforts should be made to improve the completeness of laboratory-related variables, timeliness and to increase the rate of discarded cases.

Quality indicators for eye bank.

PubMed

Acharya, Manisha; Biswas, Saurabh; Das, Animesh; Mathur, Umang; Dave, Abhishek; Singh, Ashok; Dubey, Suneeta

2018-03-01

The aim of this study is to identify quality indicators of the eye bank and validate their effectivity. Adverse reaction rate, discard rate, protocol deviation rate, and compliance rate were defined as Quality Indicators of the eye bank. These were identified based on definition of quality that captures two dimensions - "result quality" and "process quality." The indicators were measured and tracked as part of quality assurance (QA) program of the eye bank. Regular audits were performed to validate alignment of standard operating procedures (SOP) with regulatory and surgeon acceptance standards and alignment of activities performed in the eye bank with the SOP. Prospective study of the indicators was performed by comparing their observed values over the period 2011-2016. Adverse reaction rate decreased more than 8-fold (from 0.61% to 0.07%), discard rate decreased and stabilized at 30%, protocol deviation rate decreased from 1.05% to 0.08%, and compliance rate reported by annual quality audits improved from 59% to 96% at the same time. In effect, adverse reaction rate, discard rate, and protocol deviation rate were leading indicators, and compliance rate was the trailing indicator. These indicators fulfill an important gap in available literature on QA in eye banking. There are two ways in which these findings can be meaningful. First, eye banks which are new to quality measurement can adopt these indicators. Second, eye banks which are already deeply engaged in quality improvement can test these indicators in their eye bank, thereby incorporating them widely and improving them over time.

Outcome of organs procured from donors on extracorporeal membrane oxygenation support: an analysis of kidney and liver allograft data.

PubMed

Carter, Timothy; Bodzin, Adam S; Hirose, Hitoshi; West, Sharon; Hasz, Richard; Maley, Warren R; Cavarocchi, Nicholas C

2014-07-01

Extracorporeal membrane oxygenation has become rescue therapy for adults with overwhelming cardiac and/or respiratory failure. Not all patients are saved, creating a new cohort of potential organ donors. This study examines the outcomes of liver and kidney allografts procured from donors on extracorporeal membrane oxygenation (ECMO). A retrospective review was conducted through the local organ procurement organization. Donors on ECMO prior to notification were classified into donation after brain death (DBD) and donation after cardiac death (DCD). We compared short-term outcome data against published standards. Between 1995 and 2012, 97 organs were procured from 41 donors supported on ECMO. There were 68 kidneys donated, 51 were transplanted and 17 discarded. Excluding extended criteria donors, 29 DBD and 13 DCD kidneys were transplanted from donors supported on ECMO. Delayed graft function occurred in 34% of DBD kidneys and 38% of DCD kidneys. Kidney allograft survival at one yr was 93%. Twenty-four livers were procured, nine discarded, and 15 transplanted. Ninety-three percent of liver transplant recipients were alive with graft function at one yr. Donation after brain death kidneys procured from donors on ECMO perform similarly to non-ECMO organs with regard to delayed graft function (DGF), one-yr graft survival and function. Livers from ECMO donors have a higher discard rate than non-ECMO donors, but function similarly at six months and one yr. © 2014 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Experience of implementing a National pre-hospital Code Red bleeding protocol in Scotland.

PubMed

Reed, Matthew J; Glover, Alison; Byrne, Lauren; Donald, Michael; McMahon, Niall; Hughes, Neil; Littlewood, Nicola K; Garrett, Justin; Innes, Catherine; McGarvey, Margaret; Hazra, Eleanor; Rawlinson, P Sam M

2017-01-01

The Scottish Transfusion and Laboratory Support in Trauma Group (TLSTG) have introduced a unified National pre-hospital Code Red protocol. This paper reports the results of a study aiming to establish whether current pre-hospital Code Red activation criteria for trauma patients successfully predict need for in hospital transfusion or haemorrhagic death, the current admission coagulation profile and Concentrated Red Cell (CRC): Fresh Frozen Plasma (FFP) ratio being used, and whether use of the protocol leads to increased blood component discards? Prospective cohort study. Clinical and transfusion leads for each of Scotland's pre-hospital services and their receiving hospitals agreed to enter data into the study for all trauma patients for whom a pre-hospital Code Red was activated. Outcome data collected included survival 24h after Code Red activation, survival to hospital discharge, death in the Emergency Department and death in hospital. Between June 1st 2013 and October 31st 2015 there were 53 pre-hospital Code Red activations. Median Injury Severity Score (ISS) was 24 (IQR 14-37) and mortality 38%. 16 patients received pre-hospital blood. The pre-hospital Code Red protocol was sensitive for predicting transfusion or haemorrhagic death (89%). Sensitivity, specificity, positive and negative predictive values of the pre-hospital SBP <90mmHg component were 63%, 33%, 86% and 12%. 19% had an admission prothrombin time >14s and 27% had a fibrinogen <1.5g/L. CRC: FFP ratios did not drop to below 2:1 until 150min after arrival in the ED. 16 red cell units, 33 FFP and 6 platelets were discarded. This was not significantly increased compared to historical data. A National pre-hospital Code Red protocol is sensitive for predicting transfusion requirement in bleeding trauma patients and does not lead to increased blood component discards. A significant number of patients are coagulopathic and there is a need to improve CRC: FFP ratios and time to transfusion support especially FFP provision. Training clinicians to activate pre-hospital Code Red earlier during the pre-hospital phase may give blood bank more time to thaw and prepare FFP and may improve FFP administration times and ratios so long as components are used upon their availability. Copyright © 2016 Elsevier Ltd. All rights reserved.

Infectious waste surveys in a Saudi Arabian hospital: an important quality improvement tool.

PubMed

Hagen, D L; Al-Humaidi, F; Blake, M A

2001-06-01

To analyze the composition by weight of the infectious waste stream, better segregate waste, reduce disposal costs, reduce the load on the hospital incinerator, identify inappropriate items having significant cost or safety implications, and provide a safer work environment for housekeepers. Four infectious waste surveys were conducted between 1991 and 1999 that involved opening a total of 7364 bags of infectious waste. The contents of each infectious waste bag were separated into 20 different components and weighed. Inappropriately discarded items were removed and tagged with the date and hospital unit of origin. Dhahran Health Center, a 410-bed hospital operated by the Saudi Arabian Oil Company (Saudi Aramco) in Dhahran, Saudi Arabia. The surveys show a continuing trend in a higher percentage of plastics and a decrease in paper due to increased use of disposables. Much of the infectious waste consisted of plastic intravenous bottles, intravenous lines, and paper wrappers for sterile instrument sets that were not infectious. Dhahran Health Center was producing a total of 1163 kg of infectious waste per day before the first survey. This was reduced to 407 kg per day after implementation of a waste segregation program in 1991 (a reduction of 65%). Incineration operation was reduced from daily to 3 days per week, with a corresponding reduction in incinerator emissions. Infectious waste from inpatient, surgical, and obstetric areas was reduced by a total of 70% between 1991 and 1999, from 2.8 kg (6.1 lb) to 0.85 kg (1.9 lb) per patient per day. This is in the range of 2 to 4 lb per patient per day that is generally reported. Numerous inappropriately discarded items were discovered during the surveys with cost or safety implications. Each survey, including the latest one of November-December 1999, has shown that further improvements are possible in the hospital's waste management program. Specific educational efforts and changes in procedures are described. We believe this is the first report of such an extensive analysis of a hospital's infectious waste. Many hospitals do not have the resources to conduct such detailed surveys of their waste streams. However, regardless of the method of treatment and disposal, such surveys are valuable quality improvement tools because all health care facilities want to reduce disposal costs, identify high-value items mistakenly discarded, and improve safety.

The Intermediate Impossible: A Prewriting Activity for Creative Problem Solving.

ERIC Educational Resources Information Center

Karloff, Kenneth

1985-01-01

Adapts Edward de Bono's "Intermediate Impossible" strategy--for considering ideas that normally would be discarded as stepping-stones to new ideas--for use as a prewriting activity to enhance creative problem solving. (HTH)

Ivermectin Topical

MedlinePlus

... the application and rinsing steps. Use a fine-tooth comb or lice comb to remove the dead lice and nits (empty egg shells) after this treatment. Discard any unused portion of the tube once you finish this treatment. Do not use ...

Risk factors for loss of epithelial flap integrity in laser-assisted subepithelial keratectomy surgery.

PubMed

Galindo, Joanna; Fadlallah, Ali; Robinson, Steve; Chelala, Elias; Melki, Samir A

2016-04-01

To evaluate risk factors leading to loss of epithelial flap integrity in laser-assisted subepithelial keratectomy (LASEK). Boston Eye Group, Brookline, Massachusetts, USA. Retrospective case study. This retrospective chart review was performed for LASEK surgeries that occurred between January 2009 and October 2013. Logistic regression was performed to determine whether epithelium preservation was correlated with age, sex, sphere, cylinder, spherical equivalent (SE), keratometry, and central corneal thickness (CCT). The study reviewed 1009 eyes of 509 patients with a mean age of 29.1 years ± 12.2 (SD). The mean preoperative spherical refraction was -4.7 ± 2.5 diopters (D), and the mean preoperative cylinder was -1.1 ± 0.8 D. The mean preoperative decimal corrected distance visual acuity was 1.01 ± 0.07. Single-sheet mobilization of the loosened epithelium flap was found in 72.3% of cases. Fragmented preservation events occurred in 17.6% of cases; the flap was discarded in 10.0% of cases. Epithelium preservation was significantly correlated with age (P = .048) but not with other parameters (P > .05 for sex, sphere, cylinder, SE, keratometry, CCT, and surgeon experience). Epithelial flap dissection was less likely to lead to a single epithelial sheet in patients older than 50 years than in younger patients (56.3% versus 74.9%). The mean postoperative decimal uncorrected distance visual acuity (UDVA) at 3 months was 0.98 ± 0.08. There was no statistical difference in postoperative UDVA between the undiscarded flap group and discarded flap group (P = .128). Successful dissection of single-sheet epithelial flap diminished with age. No author has a financial or proprietary interest in any material or method mentioned. Copyright © 2016 ASCRS and ESCRS. Published by Elsevier Inc. All rights reserved.

Risks of toxic ash from artisanal mining of discarded cellphones.

PubMed

Hibbert, Kathleen; Ogunseitan, Oladele A

2014-08-15

The potential environmental and human health impacts of artisanal mining of electronic waste through open incineration were investigated. A market-representative set of cellphones was dismantled into four component categories-batteries, circuit boards, plastics and screens. The components were shredded, sieved and incinerated at 743-818 °C. The concentrations of 17 metals were determined using U.S. EPA methods 6010C (inductively coupled plasma-atomic emission spectrometry; 6020A (inductively coupled plasma-mass spectrometry, or 7471B and 7470A (cold-vapor atomic absorption). EPA Method 8270 (gas chromatography/mass spectrometry) was used to identify polyaromatic hydrocarbon compounds and polybrominated diphenyl ethers. EPA Method 8082A was used to measure polychlorinated biphenyls and EPA Method 8290 was used for dioxin/furans in the residue ash. The life cycle assessment model USEtox(®) was used to estimate impacts of the ash residue chemicals on human health and the ecosystem. Among metals, copper in printed circuit boards had the highest ecotoxicity impact (1610-1930PAFm(3)/kg); Beryllium in plastics had the highest impact on producing non-cancer diseases (0.14-0.44 cases/kg of ash); and Nickel had the largest impact on producing cancers (0.093-0.35 cases/kg of ash). Among organic chemicals, dioxins from incinerated batteries produced the largest ecotoxicological impact (1.07E-04 to 3.64E-04PAFm(3)/kg). Furans in incinerated batteries can generate the largest number of cancers and non-cancer diseases, representing 8.12E-09 to 2.28E-08 and 8.96E-10 and 2.52E-09 cases/kg of ash, respectively. The results reveal hazards of burning discarded cellphones to recover precious metals, and pinpoints opportunities for manufacturers to reduce toxic materials used in specific electronic components marketed globally. Copyright © 2014 Elsevier B.V. All rights reserved.

Plastic litter from shotgun ammunition on Danish coastlines - Amounts and provenance.

PubMed

Kanstrup, Niels; Balsby, Thorsten J S

2018-06-01

Plastic litter in the marine environment is a major global issue. Discarded plastic shotgun ammunition shells and discharged wads are an unwelcome addition and feature among the top ten litter items found on reference beaches in Denmark. To understand this problem, its scale and origins, collections were made by volunteers along Danish coastal shorelines. In all 3669 plastic ammunition items were collected at 68 sites along 44.6 km of shoreline. The collected items were scored for characteristic variables such as gauge and length, shot type, and the legibility of text, the erosion, and the presence of metallic components. Scores for characteristics were related to the site, area, and season and possible influences discussed. The prevalence of collected plastic shotgun litter ranges from zero to 41 items per 100 m with an average of 3.7 items per 100 m. Most ammunition litter on Danish coasts originates from hunting on Danish coastal waterbodies, but a small amount may come from further afield. North Sea coasts are the most distinctive suggesting the possible contribution of long distance drift as well as the likelihood that such litter can persist in marine habitats for decades. The pathway from initial discard to eventual wash-up and collection depends on the physical properties of plastic components, marine tides and currents, coastal topography and shoreline vegetation. Judging from the disintegration of the cartridge and the wear and decomposition of components, we conclude that there is a substantial supply of polluting plastic ammunition materials that has and will accumulate. These plastic items pose a hazard to marine ecosystems and wash up on coasts for many years to come. We recommend that responsible managers, hunters and ammunition manufacturers will take action now to reduce the problem and, thereby, protect ecosystems, wildlife and the sustainability of hunting. Copyright © 2018 Elsevier Ltd. All rights reserved.

Biobanking research on oncological residual material: a framework between the rights of the individual and the interest of society

PubMed Central

2013-01-01

Background The tissue biobanking of specific biological residual materials, which constitutes a useful resource for medical/scientific research, has raised some ethical issues, such as the need to define which kind of consent is applicable for biological residual materials biobanks. Discussion Biobank research cannot be conducted without considering arguments for obtaining the donors’ consent: in this paper we discuss to what extent consent in biobank research on oncological residual materials has to be required, and what type of consent would be appropriate in this context, considering the ethical principles of donation, solidarity, protection of the donors’ rights and the requirements of scientific progress. Regarding the relationship between informed consent and tissue collection, storage and research, we have focused on two possible choices related to the treatment of data and samples in the biobank: irreversible and reversible anonymization of the samples, distinguishing between biobank research on residual materials for which obtaining consent is necessary and justified, and biobank research for which it is not. The procedures involve different approaches and possible solutions that we will seek to define. The consent for clinical research reported in the Helsinki Declaration regards research involving human beings and for this reason it is subordinate to specific and detailed information on the research projects. Summary An important ethical aspect in regard to the role of Biobanks is encouraging sample donation. For donors, seeing human samples being kept rather than discarded, and seeing them become useful for research highlights the importance of the human body and improves the attitude towards donation. This process might also facilitate the giving of informed consent more willingly, and with greater trust. PMID:23547565

Cloth-covered chiropractic treatment tables as a source of allergens and pathogenic microbes☆

PubMed Central

Evans, Marion W.; Campbell, Alan; Husbands, Chris; Breshears, Jennell; Ndetan, Harrison; Rupert, Ronald

2008-01-01

Abstract Objective Vinyl chiropractic tables have been found to harbor pathogenic bacteria, but wiping with a simple disinfection agent can significantly reduce the risk of bacteria. The aim of this study was to assess the presence of microbes and other allergens or pathogens on cloth chiropractic tables. Methods Cloth-covered tables in a chiropractic college teaching clinic were selected. Samples were taken from the facial piece and hand rests with RODAC plates containing nutrient agar, followed by confirmatory testing when indicated. Results Numerous microbacteria strains were found, including Staphylococcus aureus and Propionibacterium. Allergen-producing molds, including Candida, were also found. Conclusion Cloth tables were shown to contain pathogenic microbacteria and allergens. The chiropractic profession should establish an infection control protocol relevant to treatment tables and discard use of cloth-covered treatment tables in this process. PMID:19674718

Reusing single-use devices in hospitals: a case study

NASA Astrophysics Data System (ADS)

Srivastava, Rajesh

2004-02-01

Traditionally, Single Use Devices (SUDs) have been used and discarded, as the name suggests. These SUDs include operating room devices used in areas such as arthroscopy and laparoscopy, devices such as catheters in cardiovascular surgery and in endoscopy, and other general products. However, many of these devices can be remanufactured. Hospitals face challenges in reducing costs. They are increasingly turning to reusing these SUDs. The use of SUDs by a local hospital is examined with the focus on the savings achieved through the program, as well as problems encountered in the process of implementing the program. Various aspects of the remanufacture and use of such devices, including the economics, quality, and customer perception are examined, as well as medical users attitudes. The success of the current program, and its viability in the future are also examined.

75 FR 31843 - Identification of Non-Hazardous Secondary Materials That Are Solid Waste

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-04

...On January 2, 2009, the Environmental Protection Agency (EPA or the Agency) issued an Advanced Notice of Proposed Rulemaking (ANPRM) to solicit comment on which non-hazardous secondary materials that are used as fuels or ingredients in combustion units are solid wastes under the Resource Conservation and Recovery Act (RCRA). The meaning of ``solid waste'' as defined under RCRA is of particular importance since it will determine whether a combustion unit is required to meet emissions standards for solid waste incineration units issued under section 129 of the Clean Air Act (CAA) or emissions standards for commercial, industrial, and institutional boilers issued under CAA section 112. CAA section 129 states that the term ``solid waste'' shall have the meaning ``established by the Administrator pursuant to [RCRA].'' EPA is proposing a definition of non-hazardous solid waste that would be used to identify whether non-hazardous secondary materials burned as fuels or used as ingredients in combustion units are solid waste. EPA is also proposing that non-hazardous secondary materials that have been discarded, and are therefore solid wastes, may be rendered products after they have been processed (altered chemically or physically) into a fuel or ingredient product. This proposed rule is necessary to identify units for the purpose of developing certain standards under sections 112 and 129 of the CAA. In addition to this proposed rule, EPA is concurrently proposing air emission requirements under CAA section 112 for industrial, commercial, and institutional boilers and process heaters, as well as air emission requirements under CAA section 129 for commercial and industrial solid waste incineration units.

Practicing Identity: A Crafty Ideal?

NASA Astrophysics Data System (ADS)

Brysbaert, A.; Vetters, M.

This paper focuses on the materialization of technological practices as a form of identity expression. Contextual analyses of a Mycenaean workshop area in the Late Bronze Age citadel of Tiryns (Argolis, Greece) are presented to investigate the interaction of different artisans under changing socio-political and economic circumstances. The case study indicates that although certain technological practices are often linked to specific crafts, they do not necessarily imply the separation of job tasks related to the working of one specific material versus another. Shared technological practices and activities, therefore, may be a factor in shaping cohesive group identities of specialized artisans. Since tracing artisans' identities is easier said than done on the basis of excavated materials alone, we employ the concepts of multiple chaînes opératoires combined with cross-craft interactions as a methodology in order to retrieve distinctive sets of both social and technological practices from the archaeological remains. These methodological concepts are not restricted to a specific set of steps in the production cycle, but ideally encompass reconstructing contexts of extraction, manufacture, distribution and discard/reuse for a range of artefacts. Therefore, these concepts reveal both technological practices, and, by contextualising these technological practices in their spatial layout, equally focus on social contacts that would have taken place during any of these actions. Our detailed contextual study demonstrates that the material remains when analysed in their entirety are complementary to textual evidence. In this case study they even form a source of information on palatial spheres of life about which the fragmentary Linear B texts, so far, remain silent.

On the other hand: including left-handers in cognitive neuroscience and neurogenetics.

PubMed

Willems, Roel M; Van der Haegen, Lise; Fisher, Simon E; Francks, Clyde

2014-03-01

Left-handers are often excluded from study cohorts in neuroscience and neurogenetics in order to reduce variance in the data. However, recent investigations have shown that the inclusion or targeted recruitment of left-handers can be informative in studies on a range of topics, such as cerebral lateralization and the genetic underpinning of asymmetrical brain development. Left-handed individuals represent a substantial portion of the human population and therefore left-handedness falls within the normal range of human diversity; thus, it is important to account for this variation in our understanding of brain functioning. We call for neuroscientists and neurogeneticists to recognize the potential of studying this often-discarded group of research subjects.

"The Scientific Method" as Myth and Ideal

NASA Astrophysics Data System (ADS)

Woodcock, Brian A.

2014-10-01

"The Scientific Method" as it has been portrayed in popular and introductory contexts has been declared a myth. The variation that one finds in introductory presentations of "The Scientific Method" is explained by the fact that there is no canonical account among historians and philosophers of science. What, in particular, is wrong with "The Scientific Method"? This essay provides a fairly comprehensive survey of shortcomings of "The Scientific Method". Included are corrections to several misconceptions that often accompany such presentations. Rather than treating "The Scientific Method" as a useful approximation or an ideal, the myth should be discarded. Lessons can be learned for introductory pedagogical contexts from considering the shortcomings of the myth.

Phasing via pure crystallographic least squares: an unexpected feature.

PubMed

Burla, Maria Cristina; Carrozzini, Benedetta; Cascarano, Giovanni Luca; Giacovazzo, Carmelo; Polidori, Giampiero

2018-03-01

Crystallographic least-squares techniques, the main tool for crystal structure refinement of small and medium-size molecules, are for the first time used for ab initio phasing. It is shown that the chief obstacle to such use, the least-squares severe convergence limits, may be overcome by a multi-solution procedure able to progressively recognize and discard model atoms in false positions and to include in the current model new atoms sufficiently close to correct positions. The applications show that the least-squares procedure is able to solve many small structures without the use of important ancillary tools: e.g. no electron-density map is calculated as a support for the least-squares procedure.

Umbilical cord blood transplants: treatment for selected hematologic and oncologic diseases.

PubMed

Stevens, K

1997-12-01

Umbilical cord blood transplantation is a rapidly growing form of treatment for many types of cancer and hematologic disorders. The concepts behind the use of umbilical cord blood transplantation are based on information gained from experience in bone marrow transplantation. Previously discarded as human waste, the blood in the umbilical cord remnant and the placenta has been observed to be rich in hematopoietic stem cells. Techniques for collecting these stem cells from the placenta may vary among the institutions, physicians, and other health care providers, including midwives and nurse practitioners, involved with this procedure. This source of hematopoietic stem cells in transplantation has many advantages, disadvantages, and controversies associated with its use.

What's My Line?

ERIC Educational Resources Information Center

Walters, Donna

1994-01-01

Presents a humorous approach to the question of how to recycle catalog cards necessitated by the results of library automation and online catalogs. A sidebar summarizes an article that appeared in the "New Yorker" magazine regarding the discard of card catalogs. (LRW)

75 FR 29475 - Maneb; Proposed Tolerance Actions

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-26

..., EPA is proposing to revoke the tolerances in 40 CFR 180.110(a) on almond; apple; banana (not more than 0.5 part per million shall be in the pulp after peel is removed and discarded (preharvest...

75 FR 24883 - Fisheries of the South Atlantic; Southeast Data, Assessment, and Review (SEDAR); Public Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-06

... history characteristics, catch statistics, discard estimates, length and age composition, and fishery... interpretation or other auxiliary aids should be directed to the Council office (see ADDRESSES) at least 10...

PRESERVATIVE LEACHING FROM WEATHERED CCA-TREATED WOOD

EPA Science Inventory

Disposal of discarded CCA-treated wood in landfills raises concerns with respect to leaching of preservative compounds. When unweathered CCA-treated wood is leached using the toxicity characteristic leaching procedure (TCLP), arsenic concentrations exceed the toxicity characteris...

Levalbuterol Oral Inhalation

MedlinePlus

... it at room temperature and away from excess heat and moisture (not in the bathroom). Do not puncture the aerosol container and do not discard it in an incinerator or fire.Levalbuterol solution must be protected from light. Store unused vials ...

Freezer anthropology: new uses for old blood.

PubMed Central

Merriwether, D A

1999-01-01

Archived blood fractions (plasma, settled red cells, white cells) have proved to be a rich and valuable source of DNA for human genetic studies. Large numbers of such samples were collected between 1960 and the present for protein and blood group studies, many of which are languishing in freezers or have already been discarded. More are discarded each year because the usefulness of these samples is not widely understood. Data from DNA derived from 10-35-year-old blood samples have been used to address the peopling of the New World and of the Pacific. Mitochondrial DNA haplotypes from studies using this source DNA support a single wave of migration into the New World (or a single source population for the New World), and that Mongolia was the likely source of the founding population. Data from Melanesia have shown that Polynesians are recent immigrants into the Pacific and did not arise from Melanesia. PMID:10091252

Schemes for efficient transmission of encoded video streams on high-speed networks

NASA Astrophysics Data System (ADS)

Ramanathan, Srinivas; Vin, Harrick M.; Rangan, P. Venkat

1994-04-01

In this paper, we argue that significant performance benefits can accrue if integrated networks implement application-specific mechanisms that account for the diversities in media compression schemes. Towards this end, we propose a simple, yet effective, strategy called Frame Induced Packet Discarding (FIPD), in which, upon detection of loss of a threshold number (determined by an application's video encoding scheme) of packets belonging to a video frame, the network attempts to discard all the remaining packets of that frame. In order to analytically quantify the performance of FIPD so as to obtain fractional frame losses that can be guaranteed to video channels, we develop a finite state, discrete time markov chain model of the FIPD strategy. The fractional frame loss thus computed can serve as the criterion for admission control at the network. Performance evaluations demonstrate the utility of the FIPD strategy.

Microbial viability in preparations packaged for single use.

PubMed

Obayashi, Akiko; Oie, Shigeharu; Kamiya, Akira

2003-05-01

We evaluated microbial viability in preparations packaged for single use only which mandate that residual solution be discarded such as albumin and globulin preparations as blood products, preparations containing albumin (such as urokinase and interferon), fat emulsions, and a preparation containing fat emulsions (propofol). In most preparations, Serratia marcescens and Burkholderia cepacia proliferated rapidly at 30 degrees C. However, in globulin preparations containing 1-2.25% glycine to prevent protein degradation (Gamma-Venin P, Venilon-I, Globulin Injection, and Ahlbulin), no growth of S. marcescens and B. cepacia was detected over 24 h at 30 degrees C. For globulin preparations containing 1-2.25% glycine, the injunction to "Discard residual solution after the package has been used" in the package inserts can be revised to "It is possible to use residual solution within 24 h after the package has been used with storage in a cool place."

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jesus, J.F.; Valentim, R.; Andrade-Oliveira, F., E-mail: jfjesus@itapeva.unesp.br, E-mail: valentim.rodolfo@unifesp.br, E-mail: felipe.oliveira@port.ac.uk

Creation of Cold Dark Matter (CCDM), in the context of Einstein Field Equations, produces a negative pressure term which can be used to explain the accelerated expansion of the Universe. In this work we tested six different spatially flat models for matter creation using statistical criteria, in light of SNe Ia data: Akaike Information Criterion (AIC), Bayesian Information Criterion (BIC) and Bayesian Evidence (BE). These criteria allow to compare models considering goodness of fit and number of free parameters, penalizing excess of complexity. We find that JO model is slightly favoured over LJO/ΛCDM model, however, neither of these, nor Γmore » = 3α H {sub 0} model can be discarded from the current analysis. Three other scenarios are discarded either because poor fitting or because of the excess of free parameters. A method of increasing Bayesian evidence through reparameterization in order to reducing parameter degeneracy is also developed.« less

Robust Statistical Detection of Power-Law Cross-Correlation.

PubMed

Blythe, Duncan A J; Nikulin, Vadim V; Müller, Klaus-Robert

2016-06-02

We show that widely used approaches in statistical physics incorrectly indicate the existence of power-law cross-correlations between financial stock market fluctuations measured over several years and the neuronal activity of the human brain lasting for only a few minutes. While such cross-correlations are nonsensical, no current methodology allows them to be reliably discarded, leaving researchers at greater risk when the spurious nature of cross-correlations is not clear from the unrelated origin of the time series and rather requires careful statistical estimation. Here we propose a theory and method (PLCC-test) which allows us to rigorously and robustly test for power-law cross-correlations, correctly detecting genuine and discarding spurious cross-correlations, thus establishing meaningful relationships between processes in complex physical systems. Our method reveals for the first time the presence of power-law cross-correlations between amplitudes of the alpha and beta frequency ranges of the human electroencephalogram.

[Excise taxes on tobacco and the problem of smuggling - concerning the credibility of the tobacco industry's "Discarded-Cigarette-Packages-Study"].

PubMed

Adams, M; Effertz, T

2011-10-01

The consumption of tobacco products is one of the main causes of illnesses. An often neglected but highly effective instrument for fiscal and preventive purposes is higher taxes on tobacco products. The tobacco industry however claims that higher taxes have tremendous effects on smuggling activity with additional costs with regard to law enforcement. The claim appears to be substantiated by a study which collects and documents the amounts of discarded empty cigarette packs, and which is used to estimate the fraction of illegally imported cigarettes. We show that this study makes use of systematic misspecifications and impreciseness and thus seems to pursue the aim of showing an exaggerated high amount of illegally imported cigarettes. The industry's claim that two thirds of non-taxed cigarettes in Germany are imported illegally, thus lacks any sound, well-grounded empirical corroboration. © Georg Thieme Verlag KG Stuttgart · New York.

Responses by pacific halibut to air exposure: Lack of correspondence among plasma constituents and mortality

USGS Publications Warehouse

Davis, M.W.; Schreck, C.B.

2005-01-01

Age-1 and age-2 Pacific halibut Hippoglossus stenolepis were exposed to a range of times in air (0-60 min) and air temperatures (10??C or 16??C) that simulated conditions on deck after capture to test for correspondence among responses in plasma constituents and mortality. Pacific halibut mortality generally did not correspond with cortisol, glucose, sodium, and potassium since the maximum observed plasma concentrations were reached after exposure to 30 min in air, while significant mortality occurred only after exposure to 40 min in air for age-1 fish and 60 min in air for age-2 fish. Predicting mortality in discarded Pacific halibut using these plasma constituents does not appear to be feasible. Lactate concentrations corresponded with mortality in age-1 fish exposed to 16??C and may be useful predictors of discard mortality under a limited set of fishing conditions.

Robust Statistical Detection of Power-Law Cross-Correlation

PubMed Central

Blythe, Duncan A. J.; Nikulin, Vadim V.; Müller, Klaus-Robert

2016-01-01

We show that widely used approaches in statistical physics incorrectly indicate the existence of power-law cross-correlations between financial stock market fluctuations measured over several years and the neuronal activity of the human brain lasting for only a few minutes. While such cross-correlations are nonsensical, no current methodology allows them to be reliably discarded, leaving researchers at greater risk when the spurious nature of cross-correlations is not clear from the unrelated origin of the time series and rather requires careful statistical estimation. Here we propose a theory and method (PLCC-test) which allows us to rigorously and robustly test for power-law cross-correlations, correctly detecting genuine and discarding spurious cross-correlations, thus establishing meaningful relationships between processes in complex physical systems. Our method reveals for the first time the presence of power-law cross-correlations between amplitudes of the alpha and beta frequency ranges of the human electroencephalogram. PMID:27250630

Bayesian analysis of CCDM models

NASA Astrophysics Data System (ADS)

Jesus, J. F.; Valentim, R.; Andrade-Oliveira, F.

2017-09-01

Creation of Cold Dark Matter (CCDM), in the context of Einstein Field Equations, produces a negative pressure term which can be used to explain the accelerated expansion of the Universe. In this work we tested six different spatially flat models for matter creation using statistical criteria, in light of SNe Ia data: Akaike Information Criterion (AIC), Bayesian Information Criterion (BIC) and Bayesian Evidence (BE). These criteria allow to compare models considering goodness of fit and number of free parameters, penalizing excess of complexity. We find that JO model is slightly favoured over LJO/ΛCDM model, however, neither of these, nor Γ = 3αH0 model can be discarded from the current analysis. Three other scenarios are discarded either because poor fitting or because of the excess of free parameters. A method of increasing Bayesian evidence through reparameterization in order to reducing parameter degeneracy is also developed.

Assessment of the Dutch organ-culture system of corneal preservation within the Eye Bank of South Australia.

PubMed

Williams, K A; Noack, L M; Alfrich, S J; Danz, R; Erickson, S A; Coster, D J

1988-02-01

Thirteen per cent of all corneas harvested by the Eye Bank of South Australia during 1986 were discarded because storage time in McCarey-Kaufman medium exceeded four days. We have therefore examined the suitability of the Dutch method of long-term corneal storage for our purposes. Twenty-two human corneas that had been discarded from the Eye Bank were assessed using the trypan blue-sucrose staining technique, and then placed into long-term storage for 15 to 17 days. They were then reassessed by vital dye staining before permanent flat-mounts were prepared for silver staining of the endothelium. A good correlation (albeit subjective) was found between the non-destructive and destructive techniques of endothelial cell assessment. Those corneas that failed to survive organ culture storage were easily detected. The Dutch system of corneal preservation and post-storage assessment seems well-suited to Australian eye-banking.

Cell culture contamination.

PubMed

Stacey, Glyn N

2011-01-01

Microbial contamination is a major issue in cell culture, but there are a range of procedures which can be adopted to prevent or eliminate contamination. Contamination may arise from the operator and the laboratory environment, from other cells used in the laboratory, and from reagents. Some infections may present a risk to laboratory workers: containment and aseptic technique are the key defence against such risks. Remedial management of suspected infection may simply mean discarding a single potentially infected culture. However, if a more widespread problem is identified, then all contaminated cultures and associated unused media that have been opened during this period should be discarded, equipment should be inspected and cleaned, cell culture operations reviewed, and isolation from other laboratories instituted until the problem is solved. Attention to training of staff, laboratory layout, appropriate use of quarantine for new cultures or cell lines, cleaning and maintenance, and quality control are important factors in preventing contamination in cell culture laboratories.