Design tradeoffs for trend assessment in aquatic biological monitoring programs

USGS Publications Warehouse

Gurtz, Martin E.; Van Sickle, John; Carlisle, Daren M.; Paulsen, Steven G.

2013-01-01

Assessments of long-term (multiyear) temporal trends in biological monitoring programs are generally undertaken without an adequate understanding of the temporal variability of biological communities. When the sources and levels of variability are unknown, managers cannot make informed choices in sampling design to achieve monitoring goals in a cost-effective manner. We evaluated different trend sampling designs by estimating components of both short- and long-term variability in biological indicators of water quality in streams. Invertebrate samples were collected from 32 sites—9 urban, 6 agricultural, and 17 relatively undisturbed (reference) streams—distributed throughout the United States. Between 5 and 12 yearly samples were collected at each site during the period 1993–2008, plus 2 samples within a 10-week index period during either 2007 or 2008. These data allowed calculation of four sources of variance for invertebrate indicators: among sites, among years within sites, interaction among sites and years (site-specific annual variation), and among samples collected within an index period at a site (residual). When estimates of these variance components are known, changes to sampling design can be made to improve trend detection. Design modifications that result in the ability to detect the smallest trend with the fewest samples are, from most to least effective: (1) increasing the number of years in the sampling period (duration of the monitoring program), (2) decreasing the interval between samples, and (3) increasing the number of repeat-visit samples per year (within an index period). This order of improvement in trend detection, which achieves the greatest gain for the fewest samples, is the same whether trends are assessed at an individual site or an average trend of multiple sites. In multiple-site surveys, increasing the number of sites has an effect similar to that of decreasing the sampling interval; the benefit of adding sites is greater when a new set of different sites is selected for each sampling effort than when the same sites are sampled each time. Understanding variance components of the ecological attributes of interest can lead to more cost-effective monitoring designs to detect trends.

Effects of sample survey design on the accuracy of classification tree models in species distribution models

USGS Publications Warehouse

Edwards, T.C.; Cutler, D.R.; Zimmermann, N.E.; Geiser, L.; Moisen, Gretchen G.

2006-01-01

We evaluated the effects of probabilistic (hereafter DESIGN) and non-probabilistic (PURPOSIVE) sample surveys on resultant classification tree models for predicting the presence of four lichen species in the Pacific Northwest, USA. Models derived from both survey forms were assessed using an independent data set (EVALUATION). Measures of accuracy as gauged by resubstitution rates were similar for each lichen species irrespective of the underlying sample survey form. Cross-validation estimates of prediction accuracies were lower than resubstitution accuracies for all species and both design types, and in all cases were closer to the true prediction accuracies based on the EVALUATION data set. We argue that greater emphasis should be placed on calculating and reporting cross-validation accuracy rates rather than simple resubstitution accuracy rates. Evaluation of the DESIGN and PURPOSIVE tree models on the EVALUATION data set shows significantly lower prediction accuracy for the PURPOSIVE tree models relative to the DESIGN models, indicating that non-probabilistic sample surveys may generate models with limited predictive capability. These differences were consistent across all four lichen species, with 11 of the 12 possible species and sample survey type comparisons having significantly lower accuracy rates. Some differences in accuracy were as large as 50%. The classification tree structures also differed considerably both among and within the modelled species, depending on the sample survey form. Overlap in the predictor variables selected by the DESIGN and PURPOSIVE tree models ranged from only 20% to 38%, indicating the classification trees fit the two evaluated survey forms on different sets of predictor variables. The magnitude of these differences in predictor variables throws doubt on ecological interpretation derived from prediction models based on non-probabilistic sample surveys. ?? 2006 Elsevier B.V. All rights reserved.

Mixing problems in using indicators for measuring regional blood flow

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ushioda, E.; Nuwayhid, B.; Tabsh, K.

A basic requirement for using indicators for measuring blood flow is adequate mixing of the indicator with blood prior to sampling the site. This requirement has been met by depositing the indicator in the heart and sampling from an artery. Recently, authors have injected microspheres into veins and sampled from venous sites. The present studies were designed to investigate the mixing problems in sheep and rabbits by means of Cardio-Green and labeled microspheres. The indicators were injected at different points in the circulatory system, and blood was sampled at different levels of the venous and arterial systems. Results show themore » following: (a) When an indicator of small molecular size (Cardio-Green) is allowed to pass through the heart chambers, adequate mixing is achieved, yielding accurate and reproducible results. (b) When any indicator (Cardio-Green or microspheres) is injected into veins, and sampling is done at any point in the venous system, mixing is inadequate, yielding flow results which are inconsistent and erratic. (c) For an indicator or large molecular size (microspheres), injecting into the left side of the heart and sampling from arterial sites yield accurate and reproducible results regardless of whether blood is sampled continuously or intermittently.« less

Cluster designs to assess the prevalence of acute malnutrition by lot quality assurance sampling: a validation study by computer simulation.

PubMed

Olives, Casey; Pagano, Marcello; Deitchler, Megan; Hedt, Bethany L; Egge, Kari; Valadez, Joseph J

2009-04-01

Traditional lot quality assurance sampling (LQAS) methods require simple random sampling to guarantee valid results. However, cluster sampling has been proposed to reduce the number of random starting points. This study uses simulations to examine the classification error of two such designs, a 67x3 (67 clusters of three observations) and a 33x6 (33 clusters of six observations) sampling scheme to assess the prevalence of global acute malnutrition (GAM). Further, we explore the use of a 67x3 sequential sampling scheme for LQAS classification of GAM prevalence. Results indicate that, for independent clusters with moderate intracluster correlation for the GAM outcome, the three sampling designs maintain approximate validity for LQAS analysis. Sequential sampling can substantially reduce the average sample size that is required for data collection. The presence of intercluster correlation can impact dramatically the classification error that is associated with LQAS analysis.

Area estimation using multiyear designs and partial crop identification

NASA Technical Reports Server (NTRS)

Sielken, R. L., Jr.

1984-01-01

Statistical procedures were developed for large area assessments using both satellite and conventional data. Crop acreages, other ground cover indices, and measures of change were the principal characteristics of interest. These characteristics are capable of being estimated from samples collected possibly from several sources at varying times, with different levels of identification. Multiyear analysis techniques were extended to include partially identified samples; the best current year sampling design corresponding to a given sampling history was determined; weights reflecting the precision or confidence in each observation were identified and utilized, and the variation in estimates incorporating partially identified samples were quantified.

Sampling designs matching species biology produce accurate and affordable abundance indices

PubMed Central

Farley, Sean; Russell, Gareth J.; Butler, Matthew J.; Selinger, Jeff

2013-01-01

Wildlife biologists often use grid-based designs to sample animals and generate abundance estimates. Although sampling in grids is theoretically sound, in application, the method can be logistically difficult and expensive when sampling elusive species inhabiting extensive areas. These factors make it challenging to sample animals and meet the statistical assumption of all individuals having an equal probability of capture. Violating this assumption biases results. Does an alternative exist? Perhaps by sampling only where resources attract animals (i.e., targeted sampling), it would provide accurate abundance estimates more efficiently and affordably. However, biases from this approach would also arise if individuals have an unequal probability of capture, especially if some failed to visit the sampling area. Since most biological programs are resource limited, and acquiring abundance data drives many conservation and management applications, it becomes imperative to identify economical and informative sampling designs. Therefore, we evaluated abundance estimates generated from grid and targeted sampling designs using simulations based on geographic positioning system (GPS) data from 42 Alaskan brown bears (Ursus arctos). Migratory salmon drew brown bears from the wider landscape, concentrating them at anadromous streams. This provided a scenario for testing the targeted approach. Grid and targeted sampling varied by trap amount, location (traps placed randomly, systematically or by expert opinion), and traps stationary or moved between capture sessions. We began by identifying when to sample, and if bears had equal probability of capture. We compared abundance estimates against seven criteria: bias, precision, accuracy, effort, plus encounter rates, and probabilities of capture and recapture. One grid (49 km2 cells) and one targeted configuration provided the most accurate results. Both placed traps by expert opinion and moved traps between capture sessions, which raised capture probabilities. The grid design was least biased (−10.5%), but imprecise (CV 21.2%), and used most effort (16,100 trap-nights). The targeted configuration was more biased (−17.3%), but most precise (CV 12.3%), with least effort (7,000 trap-nights). Targeted sampling generated encounter rates four times higher, and capture and recapture probabilities 11% and 60% higher than grid sampling, in a sampling frame 88% smaller. Bears had unequal probability of capture with both sampling designs, partly because some bears never had traps available to sample them. Hence, grid and targeted sampling generated abundance indices, not estimates. Overall, targeted sampling provided the most accurate and affordable design to index abundance. Targeted sampling may offer an alternative method to index the abundance of other species inhabiting expansive and inaccessible landscapes elsewhere, provided their attraction to resource concentrations. PMID:24392290

Sampling design for spatially distributed hydrogeologic and environmental processes

USGS Publications Warehouse

Christakos, G.; Olea, R.A.

1992-01-01

A methodology for the design of sampling networks over space is proposed. The methodology is based on spatial random field representations of nonhomogeneous natural processes, and on optimal spatial estimation techniques. One of the most important results of random field theory for physical sciences is its rationalization of correlations in spatial variability of natural processes. This correlation is extremely important both for interpreting spatially distributed observations and for predictive performance. The extent of site sampling and the types of data to be collected will depend on the relationship of subsurface variability to predictive uncertainty. While hypothesis formulation and initial identification of spatial variability characteristics are based on scientific understanding (such as knowledge of the physics of the underlying phenomena, geological interpretations, intuition and experience), the support offered by field data is statistically modelled. This model is not limited by the geometric nature of sampling and covers a wide range in subsurface uncertainties. A factorization scheme of the sampling error variance is derived, which possesses certain atttactive properties allowing significant savings in computations. By means of this scheme, a practical sampling design procedure providing suitable indices of the sampling error variance is established. These indices can be used by way of multiobjective decision criteria to obtain the best sampling strategy. Neither the actual implementation of the in-situ sampling nor the solution of the large spatial estimation systems of equations are necessary. The required values of the accuracy parameters involved in the network design are derived using reference charts (readily available for various combinations of data configurations and spatial variability parameters) and certain simple yet accurate analytical formulas. Insight is gained by applying the proposed sampling procedure to realistic examples related to sampling problems in two dimensions. ?? 1992.

An Alternative View of Some FIA Sample Design and Analysis Issues

Treesearch

Paul C. Van Deusen

2005-01-01

Sample design and analysis decisions are the result of compromises and inputs from many sources. The end result would likely change if different individuals or groups were involved in the planning process. Discussed here are some alternatives to the procedures that are currently being used for the annual inventory. The purpose is to indicate that alternatives exist and...

FORGE Milford Triaxial Test Data and Summary from EGI labs

DOE Data Explorer

Joe Moore

2016-03-01

Six samples were evaluated in unconfined and triaxial compression, their data are included in separate excel spreadsheets, and summarized in the word document. Three samples were plugged along the axis of the core (presumed to be nominally vertical) and three samples were plugged perpendicular to the axis of the core. A designation of "V"indicates vertical or the long axis of the plugged sample is aligned with the axis of the core. Similarly, "H" indicates a sample that is nominally horizontal and cut orthogonal to the axis of the core. Stress-strain curves were made before and after the testing, and are included in the word doc.. The confining pressure for this test was 2800 psi. A series of tests are being carried out on to define a failure envelope, to provide representative hydraulic fracture design parameters and for future geomechanical assessments. The samples are from well 52-21, which reaches a maximum depth of 3581 ft +/- 2 ft into a gneiss complex.

A comparison of two sampling designs for fish assemblage assessment in a large river

USGS Publications Warehouse

Kiraly, Ian A.; Coghlan, Stephen M.; Zydlewski, Joseph D.; Hayes, Daniel

2014-01-01

We compared the efficiency of stratified random and fixed-station sampling designs to characterize fish assemblages in anticipation of dam removal on the Penobscot River, the largest river in Maine. We used boat electrofishing methods in both sampling designs. Multiple 500-m transects were selected randomly and electrofished in each of nine strata within the stratified random sampling design. Within the fixed-station design, up to 11 transects (1,000 m) were electrofished, all of which had been sampled previously. In total, 88 km of shoreline were electrofished during summer and fall in 2010 and 2011, and 45,874 individuals of 34 fish species were captured. Species-accumulation and dissimilarity curve analyses indicated that all sampling effort, other than fall 2011 under the fixed-station design, provided repeatable estimates of total species richness and proportional abundances. Overall, our sampling designs were similar in precision and efficiency for sampling fish assemblages. The fixed-station design was negatively biased for estimating the abundance of species such as Common Shiner Luxilus cornutus and Fallfish Semotilus corporalis and was positively biased for estimating biomass for species such as White Sucker Catostomus commersonii and Atlantic Salmon Salmo salar. However, we found no significant differences between the designs for proportional catch and biomass per unit effort, except in fall 2011. The difference observed in fall 2011 was due to limitations on the number and location of fixed sites that could be sampled, rather than an inherent bias within the design. Given the results from sampling in the Penobscot River, application of the stratified random design is preferable to the fixed-station design due to less potential for bias caused by varying sampling effort, such as what occurred in the fall 2011 fixed-station sample or due to purposeful site selection.

Faraday Shields within a Solenoidal Coil to Reduce Sample Heating: Numerical Comparison of Designs and Experimental Verification

PubMed Central

Park, BuSik; Neuberger, Thomas; Webb, Andrew G.; Bigler, Don C.; Collins, Christopher M.

2009-01-01

A comparison of methods to decrease RF power dissipation and related heating in conductive samples using passive conductors surrounding a sample in a solenoid coil is presented. Full-Maxwell finite difference time domain numerical calculations were performed to evaluate the effect of the passive conductors by calculating conservative and magnetically-induced electric field and magnetic field distributions. To validate the simulation method, experimental measurements of temperature increase were conducted using a solenoidal coil (diameter 3 mm), a saline sample (10 mM NaCl) and passive copper shielding wires (50 μm diameter). The temperature increase was 58% lower with the copper wires present for several different input powers to the coil. This was in good agreement with simulation for the same geometry, which indicated 57% lower power dissipated in the sample with conductors present. Simulations indicate that some designs should be capable of reducing temperature increase by more than 85%. PMID:19879784

Cluster designs to assess the prevalence of acute malnutrition by lot quality assurance sampling: a validation study by computer simulation

PubMed Central

Olives, Casey; Pagano, Marcello; Deitchler, Megan; Hedt, Bethany L; Egge, Kari; Valadez, Joseph J

2009-01-01

Traditional lot quality assurance sampling (LQAS) methods require simple random sampling to guarantee valid results. However, cluster sampling has been proposed to reduce the number of random starting points. This study uses simulations to examine the classification error of two such designs, a 67×3 (67 clusters of three observations) and a 33×6 (33 clusters of six observations) sampling scheme to assess the prevalence of global acute malnutrition (GAM). Further, we explore the use of a 67×3 sequential sampling scheme for LQAS classification of GAM prevalence. Results indicate that, for independent clusters with moderate intracluster correlation for the GAM outcome, the three sampling designs maintain approximate validity for LQAS analysis. Sequential sampling can substantially reduce the average sample size that is required for data collection. The presence of intercluster correlation can impact dramatically the classification error that is associated with LQAS analysis. PMID:20011037

Multi-species attributes as the condition for adaptive sampling of rare species using two-stage sequential sampling with an auxiliary variable

USGS Publications Warehouse

Panahbehagh, B.; Smith, D.R.; Salehi, M.M.; Hornbach, D.J.; Brown, D.J.; Chan, F.; Marinova, D.; Anderssen, R.S.

2011-01-01

Assessing populations of rare species is challenging because of the large effort required to locate patches of occupied habitat and achieve precise estimates of density and abundance. The presence of a rare species has been shown to be correlated with presence or abundance of more common species. Thus, ecological community richness or abundance can be used to inform sampling of rare species. Adaptive sampling designs have been developed specifically for rare and clustered populations and have been applied to a wide range of rare species. However, adaptive sampling can be logistically challenging, in part, because variation in final sample size introduces uncertainty in survey planning. Two-stage sequential sampling (TSS), a recently developed design, allows for adaptive sampling, but avoids edge units and has an upper bound on final sample size. In this paper we present an extension of two-stage sequential sampling that incorporates an auxiliary variable (TSSAV), such as community attributes, as the condition for adaptive sampling. We develop a set of simulations to approximate sampling of endangered freshwater mussels to evaluate the performance of the TSSAV design. The performance measures that we are interested in are efficiency and probability of sampling a unit occupied by the rare species. Efficiency measures the precision of population estimate from the TSSAV design relative to a standard design, such as simple random sampling (SRS). The simulations indicate that the density and distribution of the auxiliary population is the most important determinant of the performance of the TSSAV design. Of the design factors, such as sample size, the fraction of the primary units sampled was most important. For the best scenarios, the odds of sampling the rare species was approximately 1.5 times higher for TSSAV compared to SRS and efficiency was as high as 2 (i.e., variance from TSSAV was half that of SRS). We have found that design performance, especially for adaptive designs, is often case-specific. Efficiency of adaptive designs is especially sensitive to spatial distribution. We recommend that simulations tailored to the application of interest are highly useful for evaluating designs in preparation for sampling rare and clustered populations.

Selection within households in health surveys

PubMed Central

Alves, Maria Cecilia Goi Porto; Escuder, Maria Mercedes Loureiro; Claro, Rafael Moreira; da Silva, Nilza Nunes

2014-01-01

OBJECTIVE To compare the efficiency and accuracy of sampling designs including and excluding the sampling of individuals within sampled households in health surveys. METHODS From a population survey conducted in Baixada Santista Metropolitan Area, SP, Southeastern Brazil, lowlands between 2006 and 2007, 1,000 samples were drawn for each design and estimates for people aged 18 to 59 and 18 and over were calculated for each sample. In the first design, 40 census tracts, 12 households per sector, and one person per household were sampled. In the second, no sampling within the household was performed and 40 census sectors and 6 households for the 18 to 59-year old group and 5 or 6 for the 18 and over age group or more were sampled. Precision and bias of proportion estimates for 11 indicators were assessed in the two final sets of the 1000 selected samples with the two types of design. They were compared by means of relative measurements: coefficient of variation, bias/mean ratio, bias/standard error ratio, and relative mean square error. Comparison of costs contrasted basic cost per person, household cost, number of people, and households. RESULTS Bias was found to be negligible for both designs. A lower precision was found in the design including individuals sampling within households, and the costs were higher. CONCLUSIONS The design excluding individual sampling achieved higher levels of efficiency and accuracy and, accordingly, should be first choice for investigators. Sampling of household dwellers should be adopted when there are reasons related to the study subject that may lead to bias in individual responses if multiple dwellers answer the proposed questionnaire. PMID:24789641

Results of external quality-assurance program for the National Atmospheric Deposition Program and National Trends Network during 1985

USGS Publications Warehouse

Brooks, M.H.; Schroder, L.J.; Willoughby, T.C.

1988-01-01

External quality assurance monitoring of the National Atmospheric Deposition Program (NADP) and National Trends Network (NTN) was performed by the U.S. Geological Survey during 1985. The monitoring consisted of three primary programs: (1) an intersite comparison program designed to assess the precision and accuracy of onsite pH and specific conductance measurements made by NADP and NTN site operators; (2) a blind audit sample program designed to assess the effect of routine field handling on the precision and bias of NADP and NTN wet deposition data; and (3) an interlaboratory comparison program designed to compare analytical data from the laboratory processing NADP and NTN samples with data produced by other laboratories routinely analyzing wet deposition samples and to provide estimates of individual laboratory precision. An average of 94% of the site operators participated in the four voluntary intersite comparisons during 1985. A larger percentage of participating site operators met the accuracy goal for specific conductance measurements (average, 87%) than for pH measurements (average, 67%). Overall precision was dependent on the actual specific conductance of the test solution and independent of the pH of the test solution. Data for the blind audit sample program indicated slight positive biases resulting from routine field handling for all analytes except specific conductance. These biases were not large enough to be significant for most data users. Data for the blind audit sample program also indicated that decreases in hydrogen ion concentration were accompanied by decreases in specific conductance. Precision estimates derived from the blind audit sample program indicate that the major source of uncertainty in wet deposition data is the routine field handling that each wet deposition sample receives. Results of the interlaboratory comparison program were similar to results of previous years ' evaluations, indicating that the participating laboratories produced comparable data when they analyzed identical wet deposition samples, and that the laboratory processing NADP and NTN samples achieved the best analyte precision of the participating laboratories. (Author 's abstract)

ENVIRONMENTALLY STRATIFIED SAMPLING DESIGN FOR THE DEVELOPMENT OF THE GREAT LAKES ENVIRONMENTAL INDICATORS

EPA Science Inventory

Ecological indicators must be shown to be responsive to stress. For large-scale observational studies the best way to demonstrate responsiveness is by evaluating indicators along a gradient of stress, but such gradients are often unknown for a population of sites prior to site se...

Simple Magnetic Device Indicates Thickness Of Alloy 903

NASA Technical Reports Server (NTRS)

Long, Pin Jeng; Rodriguez, Sergio; Bright, Mark L.

1995-01-01

Handheld device called "ferrite indicator" orginally designed for use in determining ferrite content of specimen of steel. Placed in contact with specimen and functions by indicating whether magnet attracted more strongly to specimen or to calibrated reference sample. Relative strength of attraction shows whether alloy overlay thinner than allowable.

Perception of Weight Status in U.S. Children and Adolescents Aged 8-15 Years, 2005-2012

MedlinePlus

... Larger FIPRs indicate greater income. Data source and methods Data from NHANES were used for these analyses. ... percentages were estimated using Taylor series linearization, a method that incorporates the sample weights and sample design. ...

For what applications can probability and non-probability sampling be used?

Treesearch

H. T. Schreuder; T. G. Gregoire; J. P. Weyer

2001-01-01

Almost any type of sample has some utility when estimating population quantities. The focus in this paper is to indicate what type or combination of types of sampling can be used in various situations ranging from a sample designed to establish cause-effect or legal challenge to one involving a simple subjective judgment. Several of these methods have little or no...

Simulation of Wind Profile Perturbations for Launch Vehicle Design

NASA Technical Reports Server (NTRS)

Adelfang, S. I.

2004-01-01

Ideally, a statistically representative sample of measured high-resolution wind profiles with wavelengths as small as tens of meters is required in design studies to establish aerodynamic load indicator dispersions and vehicle control system capability. At most potential launch sites, high- resolution wind profiles may not exist. Representative samples of Rawinsonde wind profiles to altitudes of 30 km are more likely to be available from the extensive network of measurement sites established for routine sampling in support of weather observing and forecasting activity. Such a sample, large enough to be statistically representative of relatively large wavelength perturbations, would be inadequate for launch vehicle design assessments because the Rawinsonde system accurately measures wind perturbations with wavelengths no smaller than 2000 m (1000 m altitude increment). The Kennedy Space Center (KSC) Jimsphere wind profiles (150/month and seasonal 2 and 3.5-hr pairs) are the only adequate samples of high resolution profiles approx. 150 to 300 m effective resolution, but over-sampled at 25 m intervals) that have been used extensively for launch vehicle design assessments. Therefore, a simulation process has been developed for enhancement of measured low-resolution Rawinsonde profiles that would be applicable in preliminary launch vehicle design studies at launch sites other than KSC.

[New design of the Health Survey of Catalonia (Spain, 2010-2014): a step forward in health planning and evaluation].

PubMed

Alcañiz-Zanón, Manuela; Mompart-Penina, Anna; Guillén-Estany, Montserrat; Medina-Bustos, Antonia; Aragay-Barbany, Josep M; Brugulat-Guiteras, Pilar; Tresserras-Gaju, Ricard

2014-01-01

This article presents the genesis of the Health Survey of Catalonia (Spain, 2010-2014) with its semiannual subsamples and explains the basic characteristics of its multistage sampling design. In comparison with previous surveys, the organizational advantages of this new statistical operation include rapid data availability and the ability to continuously monitor the population. The main benefits are timeliness in the production of indicators and the possibility of introducing new topics through the supplemental questionnaire as a function of needs. Limitations consist of the complexity of the sample design and the lack of longitudinal follow-up of the sample. Suitable sampling weights for each specific subsample are necessary for any statistical analysis of micro-data. Accuracy in the analysis of territorial disaggregation or population subgroups increases if annual samples are accumulated. Copyright © 2013 SESPAS. Published by Elsevier Espana. All rights reserved.

Optimal color design of psychological counseling room by design of experiments and response surface methodology.

PubMed

Liu, Wenjuan; Ji, Jianlin; Chen, Hua; Ye, Chenyu

2014-01-01

Color is one of the most powerful aspects of a psychological counseling environment. Little scientific research has been conducted on color design and much of the existing literature is based on observational studies. Using design of experiments and response surface methodology, this paper proposes an optimal color design approach for transforming patients' perception into color elements. Six indices, pleasant-unpleasant, interesting-uninteresting, exciting-boring, relaxing-distressing, safe-fearful, and active-inactive, were used to assess patients' impression. A total of 75 patients participated, including 42 for Experiment 1 and 33 for Experiment 2. 27 representative color samples were designed in Experiment 1, and the color sample (L = 75, a = 0, b = -60) was the most preferred one. In Experiment 2, this color sample was set as the 'central point', and three color attributes were optimized to maximize the patients' satisfaction. The experimental results show that the proposed method can get the optimal solution for color design of a counseling room.

Optimal Color Design of Psychological Counseling Room by Design of Experiments and Response Surface Methodology

PubMed Central

Chen, Hua; Ye, Chenyu

2014-01-01

Color is one of the most powerful aspects of a psychological counseling environment. Little scientific research has been conducted on color design and much of the existing literature is based on observational studies. Using design of experiments and response surface methodology, this paper proposes an optimal color design approach for transforming patients’ perception into color elements. Six indices, pleasant-unpleasant, interesting-uninteresting, exciting-boring, relaxing-distressing, safe-fearful, and active-inactive, were used to assess patients’ impression. A total of 75 patients participated, including 42 for Experiment 1 and 33 for Experiment 2. 27 representative color samples were designed in Experiment 1, and the color sample (L = 75, a = 0, b = -60) was the most preferred one. In Experiment 2, this color sample was set as the ‘central point’, and three color attributes were optimized to maximize the patients’ satisfaction. The experimental results show that the proposed method can get the optimal solution for color design of a counseling room. PMID:24594683

THE EMPACT BEACHES: A CASE STUDY IN RECREATIONAL WATER SAMPLING

EPA Science Inventory

Various chapters describe sample and experimental design, use of a geometric mean or an arithmetic mean, modeling and forecasting, and risk assessment in relation to monitoring recreational waters for fecal indicators. All of these aspects of monitoring are dependent on the spat...

Evidence from Biochemical Pathways in Favor of Unfinished Evolution Rather than Intelligent Design

ERIC Educational Resources Information Center

Behrman, Edward J.; Marzluf, George A.

2004-01-01

An argument is made in favor of imperfect or unfinished evolution based on some metabolic pathways in which it seems that intelligent design would have done better. The case studies noted indicate the absence of highly intelligent design and are not intended as comprehensive collection but as a limited sample of inefficient situations in…

Inclusion of mobile telephone numbers into an ongoing population health survey in New South Wales, Australia, using an overlapping dual-frame design: impact on the time series.

PubMed

Barr, Margo L; Ferguson, Raymond A; Steel, David G

2014-08-12

Since 1997, the NSW Population Health Survey (NSWPHS) had selected the sample using random digit dialing of landline telephone numbers. When the survey began coverage of the population by landline phone frames was high (96%). As landline coverage in Australia has declined and continues to do so, in 2012, a sample of mobile telephone numbers was added to the survey using an overlapping dual-frame design. Details of the methodology are published elsewhere. This paper discusses the impacts of the sampling frame change on the time series, and provides possible approaches to handling these impacts. Prevalence estimates were calculated for type of phone-use, and a range of health indicators. Prevalence ratios (PR) for each of the health indicators were also calculated using Poisson regression analysis with robust variance estimation by type of phone-use. Health estimates for 2012 were compared to 2011. The full time series was examined for selected health indicators. It was estimated from the 2012 NSWPHS that 20.0% of the NSW population were mobile-only phone users. Looking at the full time series for overweight or obese and current smoking if the NSWPHS had continued to be undertaken only using a landline frame, overweight or obese would have been shown to continue to increase and current smoking would have been shown to continue to decrease. However, with the introduction of the overlapping dual-frame design in 2012, overweight or obese increased until 2011 and then decreased in 2012, and current smoking decreased until 2011, and then increased in 2012. Our examination of these time series showed that the changes were a consequence of the sampling frame change and were not real changes. Both the backcasting method and the minimal coverage method could adequately adjust for the design change and allow for the continuation of the time series. The inclusion of the mobile telephone numbers, through an overlapping dual-frame design, did impact on the time series for some of the health indicators collected through the NSWPHS, but only in that it corrected the estimates that were being calculated from a sample frame that was progressively covering less of the population.

A Passive Earth-Entry Capsule for Mars Sample Return

NASA Technical Reports Server (NTRS)

Mitcheltree, Robert A.; Kellas, Sotiris

1999-01-01

A combination of aerodynamic analysis and testing, aerothermodynamic analysis, structural analysis and testing, impact analysis and testing, thermal analysis, ground characterization tests, configuration packaging, and trajectory simulation are employed to determine the feasibility of an entirely passive Earth entry capsule for the Mars Sample Return mission. The design circumvents the potential failure modes of a parachute terminal descent system by replacing that system with passive energy absorbing material to cushion the Mars samples during ground impact. The suggested design utilizes a spherically blunted 45-degree half-angle cone forebody with an ablative heat shield. The primary structure is a hemispherical, composite sandwich enclosing carbon foam energy absorbing material. Though no demonstration test of the entire system is included, results of the tests and analysis presented indicate that the design is a viable option for the Mars Sample Return Mission.

[Satisfaction and perceived quality of people insured by the Social Health Protection in Mexico. Methodological foundations].

PubMed

Saturno-Hernández, Pedro J; Gutiérrez-Reyes, Juan Pablo; Vieyra-Romero, Waldo Ivan; Romero-Martínez, Martín; O'Shea-Cuevas, Gabriel Jaime; Lozano-Herrera, Javier; Tavera-Martínez, Sonia; Hernández-Ávila, Mauricio

2016-01-01

To describe the conceptual framework and methods for implementation and analysis of the satisfaction survey of the Mexican System for Social Protection in Health. We analyze the methodological elements of the 2013, 2014 and 2015 surveys, including the instrument, sampling method and study design, conceptual framework, and characteristics and indicators of the analysis. The survey captures information on perceived quality and satisfaction. Sampling has national and State representation. Simple and composite indicators (index of satisfaction and rate of reported quality problems) are built and described. The analysis is completed using Pareto diagrams, correlation between indicators and association with satisfaction by means of multivariate models. The measurement of satisfaction and perceived quality is a complex but necessary process to comply with regulations and to identify strategies for improvement. The described survey presents a design and rigorous analysis focused on its utility for improving.

A new design of groundwater sampling device and its application.

PubMed

Tsai, Yih-jin; Kuo, Ming-ching T

2005-01-01

Compounds in the atmosphere contaminate samples of groundwater. An inexpensive and simple method for collecting groundwater samples is developed to prevent contamination when the background concentration of contaminants is high. This new design of groundwater sampling device involves a glass sampling bottle with a Teflon-lined valve at each end. A cleaned and dried sampling bottle was connected to a low flow-rate peristaltic pump with Teflon tubing and was filled with water. No headspace volume was remained in the sampling bottle. The sample bottle was then packed in a PVC bag to prevent the target component from infiltrating into the water sample through the valves. In this study, groundwater was sampled at six wells using both the conventional method and the improved method. The analysis of trichlorofluoromethane (CFC-11) concentrations at these six wells indicates that all the groundwater samples obtained by the conventional sampling method were contaminated by CFC-11 from the atmosphere. The improved sampling method greatly eliminated the problems of contamination, preservation and quantitative analysis of natural water.

Information Processing in Auditory-Visual Conflict.

ERIC Educational Resources Information Center

Henker, Barbara A.; Whalen, Carol K.

1972-01-01

The present study used a set of bimodal (auditory-visual) conflict designed specifically for the preschool child. The basic component was a match-to-sample sequence designed to reduce the often-found contaminating factors in studies with young children: failure to understand or remember instructions, inability to perform the indicator response, or…

Trainee and Instructor Task Quantification: Development of Quantitative Indices and a Predictive Methodology.

ERIC Educational Resources Information Center

Whaton, George R.; And Others

As the first step in a program to develop quantitative techniques for prescribing the design and use of training systems, the present study attempted: to compile an initial set of quantitative indices, to determine whether these indices could be used to describe a sample of trainee tasks and differentiate among them, to develop a predictive…

Optimal sampling design for estimating spatial distribution and abundance of a freshwater mussel population

USGS Publications Warehouse

Pooler, P.S.; Smith, D.R.

2005-01-01

We compared the ability of simple random sampling (SRS) and a variety of systematic sampling (SYS) designs to estimate abundance, quantify spatial clustering, and predict spatial distribution of freshwater mussels. Sampling simulations were conducted using data obtained from a census of freshwater mussels in a 40 X 33 m section of the Cacapon River near Capon Bridge, West Virginia, and from a simulated spatially random population generated to have the same abundance as the real population. Sampling units that were 0.25 m 2 gave more accurate and precise abundance estimates and generally better spatial predictions than 1-m2 sampling units. Systematic sampling with ???2 random starts was more efficient than SRS. Estimates of abundance based on SYS were more accurate when the distance between sampling units across the stream was less than or equal to the distance between sampling units along the stream. Three measures for quantifying spatial clustering were examined: Hopkins Statistic, the Clumping Index, and Morisita's Index. Morisita's Index was the most reliable, and the Hopkins Statistic was prone to false rejection of complete spatial randomness. SYS designs with units spaced equally across and up stream provided the most accurate predictions when estimating the spatial distribution by kriging. Our research indicates that SYS designs with sampling units equally spaced both across and along the stream would be appropriate for sampling freshwater mussels even if no information about the true underlying spatial distribution of the population were available to guide the design choice. ?? 2005 by The North American Benthological Society.

Repeated significance tests of linear combinations of sensitivity and specificity of a diagnostic biomarker

PubMed Central

Wu, Mixia; Shu, Yu; Li, Zhaohai; Liu, Aiyi

2016-01-01

A sequential design is proposed to test whether the accuracy of a binary diagnostic biomarker meets the minimal level of acceptance. The accuracy of a binary diagnostic biomarker is a linear combination of the marker’s sensitivity and specificity. The objective of the sequential method is to minimize the maximum expected sample size under the null hypothesis that the marker’s accuracy is below the minimal level of acceptance. The exact results of two-stage designs based on Youden’s index and efficiency indicate that the maximum expected sample sizes are smaller than the sample sizes of the fixed designs. Exact methods are also developed for estimation, confidence interval and p-value concerning the proposed accuracy index upon termination of the sequential testing. PMID:26947768

Perceptions of Preservice Teachers regarding the Integration of Information and Communication Technologies in Turkish Education Faculties

ERIC Educational Resources Information Center

Akbulut, Yavuz; Odabasi, H. Ferhan; Kuzu, Abdullah

2011-01-01

This study explored the views of pre-service teachers regarding the indicators of information and communication technologies (ICT) at Turkish education faculties. A cross-sectional survey design was implemented with graduating students enrolled in Turkish education faculties. A combination of stratified random sampling and systematic sampling was…

Estimation of genetic parameters and their sampling variances of quantitative traits in the type 2 modified augmented design

USDA-ARS?s Scientific Manuscript database

We proposed a method to estimate the error variance among non-replicated genotypes, thus to estimate the genetic parameters by using replicated controls. We derived formulas to estimate sampling variances of the genetic parameters. Computer simulation indicated that the proposed methods of estimatin...

The Children's Perceived Locus of Causality Scale for Physical Education

ERIC Educational Resources Information Center

Pannekoek, Linda; Piek, Jan P.; Hagger, Martin S.

2014-01-01

A mixed methods design was applied to evaluate the application of the Perceived Locus of Causality scale (PLOC) to preadolescent samples in physical education settings. Subsequent to minor item adaptations to accommodate the assessment of younger samples, qualitative pilot tests were performed (N = 15). Children's reports indicated the need…

Selected Oral Health Indicators in the United States, 2005-2008

MedlinePlus

... errors of the percentages were estimated using Taylor series linearization, to take into account the complex sampling design. The statistical significance of differences between estimates were ...

Model-based inference for small area estimation with sampling weights

PubMed Central

Vandendijck, Y.; Faes, C.; Kirby, R.S.; Lawson, A.; Hens, N.

2017-01-01

Obtaining reliable estimates about health outcomes for areas or domains where only few to no samples are available is the goal of small area estimation (SAE). Often, we rely on health surveys to obtain information about health outcomes. Such surveys are often characterised by a complex design, stratification, and unequal sampling weights as common features. Hierarchical Bayesian models are well recognised in SAE as a spatial smoothing method, but often ignore the sampling weights that reflect the complex sampling design. In this paper, we focus on data obtained from a health survey where the sampling weights of the sampled individuals are the only information available about the design. We develop a predictive model-based approach to estimate the prevalence of a binary outcome for both the sampled and non-sampled individuals, using hierarchical Bayesian models that take into account the sampling weights. A simulation study is carried out to compare the performance of our proposed method with other established methods. The results indicate that our proposed method achieves great reductions in mean squared error when compared with standard approaches. It performs equally well or better when compared with more elaborate methods when there is a relationship between the responses and the sampling weights. The proposed method is applied to estimate asthma prevalence across districts. PMID:28989860

Environment: General; Grammar & Usage; Money Management; Music History; Web Page Creation & Design.

ERIC Educational Resources Information Center

Web Feet, 2001

2001-01-01

Describes Web site resources for elementary and secondary education in the topics of: environment, grammar, money management, music history, and Web page creation and design. Each entry includes an illustration of a sample page on the site and an indication of the grade levels for which it is appropriate. (AEF)

Developing effective sampling designs for monitoring natural resources in Alaskan national parks: an example using simulations and vegetation data

USGS Publications Warehouse

Thompson, William L.; Miller, Amy E.; Mortenson, Dorothy C.; Woodward, Andrea

2011-01-01

Monitoring natural resources in Alaskan national parks is challenging because of their remoteness, limited accessibility, and high sampling costs. We describe an iterative, three-phased process for developing sampling designs based on our efforts to establish a vegetation monitoring program in southwest Alaska. In the first phase, we defined a sampling frame based on land ownership and specific vegetated habitats within the park boundaries and used Path Distance analysis tools to create a GIS layer that delineated portions of each park that could be feasibly accessed for ground sampling. In the second phase, we used simulations based on landcover maps to identify size and configuration of the ground sampling units (single plots or grids of plots) and to refine areas to be potentially sampled. In the third phase, we used a second set of simulations to estimate sample size and sampling frequency required to have a reasonable chance of detecting a minimum trend in vegetation cover for a specified time period and level of statistical confidence. Results of the first set of simulations indicated that a spatially balanced random sample of single plots from the most common landcover types yielded the most efficient sampling scheme. Results of the second set of simulations were compared with field data and indicated that we should be able to detect at least a 25% change in vegetation attributes over 31. years by sampling 8 or more plots per year every five years in focal landcover types. This approach would be especially useful in situations where ground sampling is restricted by access.

Improved variance estimation of classification performance via reduction of bias caused by small sample size.

PubMed

Wickenberg-Bolin, Ulrika; Göransson, Hanna; Fryknäs, Mårten; Gustafsson, Mats G; Isaksson, Anders

2006-03-13

Supervised learning for classification of cancer employs a set of design examples to learn how to discriminate between tumors. In practice it is crucial to confirm that the classifier is robust with good generalization performance to new examples, or at least that it performs better than random guessing. A suggested alternative is to obtain a confidence interval of the error rate using repeated design and test sets selected from available examples. However, it is known that even in the ideal situation of repeated designs and tests with completely novel samples in each cycle, a small test set size leads to a large bias in the estimate of the true variance between design sets. Therefore different methods for small sample performance estimation such as a recently proposed procedure called Repeated Random Sampling (RSS) is also expected to result in heavily biased estimates, which in turn translates into biased confidence intervals. Here we explore such biases and develop a refined algorithm called Repeated Independent Design and Test (RIDT). Our simulations reveal that repeated designs and tests based on resampling in a fixed bag of samples yield a biased variance estimate. We also demonstrate that it is possible to obtain an improved variance estimate by means of a procedure that explicitly models how this bias depends on the number of samples used for testing. For the special case of repeated designs and tests using new samples for each design and test, we present an exact analytical expression for how the expected value of the bias decreases with the size of the test set. We show that via modeling and subsequent reduction of the small sample bias, it is possible to obtain an improved estimate of the variance of classifier performance between design sets. However, the uncertainty of the variance estimate is large in the simulations performed indicating that the method in its present form cannot be directly applied to small data sets.

Social Indicators of Family Life Satisfaction: A Comparison of Husbands and Wives.

ERIC Educational Resources Information Center

Mancini, Jay A.

Subjective and objective covariates of family life satisfaction among husbands and wives were examined. Interviews were conducted in the Spring of 1976 with 974 married adults selected by means of both probability and modified probability sampling designs. Independent indicators were categorized into three general groups: familial characteristics,…

Conceptual Model of Clinical Governance Information System for Statistical Indicators by Using UML in Two Sample Hospitals.

PubMed

Jeddi, Fatemeh Rangraz; Farzandipoor, Mehrdad; Arabfard, Masoud; Hosseini, Azam Haj Mohammad

2014-04-01

The purpose of this study was investigating situation and presenting a conceptual model for clinical governance information system by using UML in two sample hospitals. However, use of information is one of the fundamental components of clinical governance; but unfortunately, it does not pay much attention to information management. A cross sectional study was conducted in October 2012- May 2013. Data were gathered through questionnaires and interviews in two sample hospitals. Face and content validity of the questionnaire has been confirmed by experts. Data were collected from a pilot hospital and reforms were carried out and Final questionnaire was prepared. Data were analyzed by descriptive statistics and SPSS 16 software. With the scenario derived from questionnaires, UML diagrams are presented by using Rational Rose 7 software. The results showed that 32.14 percent Indicators of the hospitals were calculated. Database was not designed and 100 percent of the hospital's clinical governance was required to create a database. Clinical governance unit of hospitals to perform its mission, do not have access to all the needed indicators. Defining of Processes and drawing of models and creating of database are essential for designing of information systems.

Conceptual Model of Clinical Governance Information System for Statistical Indicators by Using UML in Two Sample Hospitals.

PubMed

Jeddi, Fatemeh Rangraz; Farzandipoor, Mehrdad; Arabfard, Masoud; Hosseini, Azam Haj Mohammad

2016-04-01

The purpose of this study was investigating situation and presenting a conceptual model for clinical governance information system by using UML in two sample hospitals. However, use of information is one of the fundamental components of clinical governance; but unfortunately, it does not pay much attention to information management. A cross sectional study was conducted in October 2012- May 2013. Data were gathered through questionnaires and interviews in two sample hospitals. Face and content validity of the questionnaire has been confirmed by experts. Data were collected from a pilot hospital and reforms were carried out and Final questionnaire was prepared. Data were analyzed by descriptive statistics and SPSS 16 software. With the scenario derived from questionnaires, UML diagrams are presented by using Rational Rose 7 software. The results showed that 32.14 percent Indicators of the hospitals were calculated. Database was not designed and 100 percent of the hospital's clinical governance was required to create a database. Clinical governance unit of hospitals to perform its mission, do not have access to all the needed indicators. Defining of Processes and drawing of models and creating of database are essential for designing of information systems.

Image gathering and processing - Information and fidelity

NASA Technical Reports Server (NTRS)

Huck, F. O.; Fales, C. L.; Halyo, N.; Samms, R. W.; Stacy, K.

1985-01-01

In this paper we formulate and use information and fidelity criteria to assess image gathering and processing, combining optical design with image-forming and edge-detection algorithms. The optical design of the image-gathering system revolves around the relationship among sampling passband, spatial response, and signal-to-noise ratio (SNR). Our formulations of information, fidelity, and optimal (Wiener) restoration account for the insufficient sampling (i.e., aliasing) common in image gathering as well as for the blurring and noise that conventional formulations account for. Performance analyses and simulations for ordinary optical-design constraints and random scences indicate that (1) different image-forming algorithms prefer different optical designs; (2) informationally optimized designs maximize the robustness of optimal image restorations and lead to the highest-spatial-frequency channel (relative to the sampling passband) for which edge detection is reliable (if the SNR is sufficiently high); and (3) combining the informationally optimized design with a 3 by 3 lateral-inhibitory image-plane-processing algorithm leads to a spatial-response shape that approximates the optimal edge-detection response of (Marr's model of) human vision and thus reduces the data preprocessing and transmission required for machine vision.

Preconcentration and determination of ceftazidime in real samples using dispersive liquid-liquid microextraction and high-performance liquid chromatography with the aid of experimental design.

PubMed

Razmi, Rasoul; Shahpari, Behrouz; Pourbasheer, Eslam; Boustanifar, Mohammad Hasan; Azari, Zhila; Ebadi, Amin

2016-11-01

A rapid and simple method for the extraction and preconcentration of ceftazidime in aqueous samples has been developed using dispersive liquid-liquid microextraction followed by high-performance liquid chromatography analysis. The extraction parameters, such as the volume of extraction solvent and disperser solvent, salt effect, sample volume, centrifuge rate, centrifuge time, extraction time, and temperature in the dispersive liquid-liquid microextraction process, were studied and optimized with the experimental design methods. Firstly, for the preliminary screening of the parameters the taguchi design was used and then, the fractional factorial design was used for significant factors optimization. At the optimum conditions, the calibration curves for ceftazidime indicated good linearity over the range of 0.001-10 μg/mL with correlation coefficients higher than the 0.98, and the limits of detection were 0.13 and 0.17 ng/mL, for water and urine samples, respectively. The proposed method successfully employed to determine ceftazidime in water and urine samples and good agreement between the experimental data and predictive values has been achieved. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Optimal Digital Controller Design for a Servo Motor Taking Account of Intersample Behavior

NASA Astrophysics Data System (ADS)

Akiyoshi, Tatsuro; Imai, Jun; Funabiki, Shigeyuki

A continuous-time plant with discretized continuous-time controller do not yield stability if the sampling rate is lower than some certain level. Thus far, high functioning electronic control has made use of high cost hardwares which are needed to implement discretized continuous-time controllers, while low cost hardwares generally do not have high enough sampling rate. This technical note presents results comparing performance indices with and without intersample behavior, and some answer to the question how a low specification device can control a plant effectively. We consider a machine simulating wafer handling robots at semiconductor factories, which is an electromechanical system driven by a direct drive motor. We illustrate controller design for the robot with and without intersample behavior, and simulations and experimental results by using these controllers. Taking intersample behavior into account proves to be effective to make control performance better and enables it to choose relatively long sampling period. By controller design via performance index with intersample behavior, we can cope with situation where short enough sampling period may not be employed, and freedom of controller design might be widened especially on choice of sampling period.

Validity, Reliability and Difficulty Indices for Instructor-Built Exam Questions

ERIC Educational Resources Information Center

Jandaghi, Gholamreza; Shaterian, Fatemeh

2008-01-01

The purpose of the research is to determine college Instructor's skill rate in designing exam questions in chemistry subject. The statistical population was all of chemistry exam sheets for two semesters in one academic year from which a sample of 364 exam sheets was drawn using multistage cluster sampling. Two experts assessed the sheets and by…

Student Annotation Form To Capture Reflections on Work Samples in Portfolios.

ERIC Educational Resources Information Center

Brookhart, Susan M.

Evidence is presented for the validity and reliability of a student annotation form used to collect student reflections on work samples in portfolios. The form was designed to be general enough to apply to many grades and subjects and simple enough for students at all levels to complete. The annotation forms asked students to indicate how…

Digital Accessible Knowledge and well-inventoried sites for birds in Mexico: baseline sites for measuring faunistic change.

PubMed

Peterson, A Townsend; Navarro-Sigüenza, Adolfo G; Martínez-Meyer, Enrique

2016-01-01

Faunal change is a basic and fundamental element in ecology, biogeography, and conservation biology, yet vanishingly few detailed studies have documented such changes rigorously over decadal time scales. This study responds to that gap in knowledge, providing a detailed analysis of Digital Accessible Knowledge of the birds of Mexico, designed to marshal DAK to identify sites that were sampled and inventoried rigorously prior to the beginning of major global climate change (1980). We accumulated DAK records for Mexican birds from all relevant online biodiversity data portals. After extensive cleaning steps, we calculated completeness indices for each 0.05° pixel across the country; we also detected 'hotspots' of sampling, and calculated completeness indices for these broader areas as well. Sites were designated as well-sampled if they had completeness indices above 80% and >200 associated DAK records. We identified 100 individual pixels and 20 broader 'hotspots' of sampling that were demonstrably well-inventoried prior to 1980. These sites are catalogued and documented to promote and enable resurvey efforts that can document events of avifaunal change (and non-change) across the country on decadal time scales. Development of repeated surveys for many sites across Mexico, and particularly for sites for which historical surveys document their avifaunas prior to major climate change processes, would pay rich rewards in information about distributional dynamics of Mexican birds.

Typography for Children May Be Inappropriately Designed

ERIC Educational Resources Information Center

Wilkins, Arnold; Cleave, Roanna; Grayson, Nicola; Wilson, Louise

2009-01-01

We present four studies indicating that the size and design of the typeface in textual material for children aged 7-9 may impair speed of reading and comprehension, and measurement of reading attainment. The first study compared the speed with which sample sentences were comprehended. The sentences were printed in Arial font with an x-height of…

Internet-Based Interventions Have Potential to Affect Short-Term Mediators and Indicators of Dietary Behavior of Young Adults

ERIC Educational Resources Information Center

Park, Amanda; Nitzke, Susan; Kritsch, Karen; Kattelmann, Kendra; White, Adrienne; Boeckner, Linda; Lohse, Barbara; Hoerr, Sharon; Greene, Geoffrey; Zhang, Zhumin

2008-01-01

Objective: Evaluate a theory-based, Internet-delivered nutrition education module. Design: Randomized, treatment-control design with pre-post intervention assessments. Setting and Participants: Convenience sample of 160 young adults (aged 18-24) recruited by community educators in 4 states. Study completers (n = 96) included a mix of…

Contamination of Fresh Produce by Microbial Indicators on Farms and in Packing Facilities: Elucidation of Environmental Routes

PubMed Central

Bartz, Faith E.; Lickness, Jacquelyn Sunshine; Heredia, Norma; Fabiszewski de Aceituno, Anna; Newman, Kira L.; Hodge, Domonique Watson; Jaykus, Lee-Ann; García, Santos

2017-01-01

ABSTRACT To improve food safety on farms, it is critical to quantify the impact of environmental microbial contamination sources on fresh produce. However, studies are hampered by difficulties achieving study designs with powered sample sizes to elucidate relationships between environmental and produce contamination. Our goal was to quantify, in the agricultural production environment, the relationship between microbial contamination on hands, soil, and water and contamination on fresh produce. In 11 farms and packing facilities in northern Mexico, we applied a matched study design: composite samples (n = 636, equivalent to 11,046 units) of produce rinses were matched to water, soil, and worker hand rinses during two growing seasons. Microbial indicators (coliforms, Escherichia coli, Enterococcus spp., and somatic coliphage) were quantified from composite samples. Statistical measures of association and correlations were calculated through Spearman's correlation, linear regression, and logistic regression models. The concentrations of all microbial indicators were positively correlated between produce and hands (ρ range, 0.41 to 0.75; P < 0.01). When E. coli was present on hands, the handled produce was nine times more likely to contain E. coli (P < 0.05). Similarly, when coliphage was present on hands, the handled produce was eight times more likely to contain coliphage (P < 0.05). There were relatively low concentrations of indicators in soil and water samples, and a few sporadic significant associations were observed between contamination of soil and water and contamination of produce. This methodology provides a foundation for future field studies, and results highlight the need for interventions surrounding farmworker hygiene and sanitation to reduce microbial contamination of farmworkers' hands. IMPORTANCE This study of the relationships between microbes on produce and in the farm environment can be used to support the design of targeted interventions to prevent or reduce microbial contamination of fresh produce with associated reductions in foodborne illness. PMID:28363965

Contamination of Fresh Produce by Microbial Indicators on Farms and in Packing Facilities: Elucidation of Environmental Routes.

PubMed

Bartz, Faith E; Lickness, Jacquelyn Sunshine; Heredia, Norma; Fabiszewski de Aceituno, Anna; Newman, Kira L; Hodge, Domonique Watson; Jaykus, Lee-Ann; García, Santos; Leon, Juan S

2017-06-01

To improve food safety on farms, it is critical to quantify the impact of environmental microbial contamination sources on fresh produce. However, studies are hampered by difficulties achieving study designs with powered sample sizes to elucidate relationships between environmental and produce contamination. Our goal was to quantify, in the agricultural production environment, the relationship between microbial contamination on hands, soil, and water and contamination on fresh produce. In 11 farms and packing facilities in northern Mexico, we applied a matched study design: composite samples ( n = 636, equivalent to 11,046 units) of produce rinses were matched to water, soil, and worker hand rinses during two growing seasons. Microbial indicators (coliforms, Escherichia coli , Enterococcus spp., and somatic coliphage) were quantified from composite samples. Statistical measures of association and correlations were calculated through Spearman's correlation, linear regression, and logistic regression models. The concentrations of all microbial indicators were positively correlated between produce and hands (ρ range, 0.41 to 0.75; P < 0.01). When E. coli was present on hands, the handled produce was nine times more likely to contain E. coli ( P < 0.05). Similarly, when coliphage was present on hands, the handled produce was eight times more likely to contain coliphage ( P < 0.05). There were relatively low concentrations of indicators in soil and water samples, and a few sporadic significant associations were observed between contamination of soil and water and contamination of produce. This methodology provides a foundation for future field studies, and results highlight the need for interventions surrounding farmworker hygiene and sanitation to reduce microbial contamination of farmworkers' hands. IMPORTANCE This study of the relationships between microbes on produce and in the farm environment can be used to support the design of targeted interventions to prevent or reduce microbial contamination of fresh produce with associated reductions in foodborne illness. Copyright © 2017 American Society for Microbiology.

Effects of the "Positive Action" Program on Indicators of Positive Youth Development among Urban Youth

ERIC Educational Resources Information Center

Lewis, Kendra M.; Vuchinich, Samuel; Ji, Peter; DuBois, David L.; Acock, Alan; Bavarian, Niloofar; Day, Joseph; Silverthorn, Naida; Flay, Brian R.

2016-01-01

This study evaluated effects of "Positive Action," a school-based social-emotional and character development intervention, on indicators of positive youth development (PYD) among a sample of low-income, ethnic minority youth attending 14 urban schools. The study used a matched-pair, cluster-randomized controlled design at the school…

Crown-condition classification: a guide to data collection and analysis

Treesearch

Michael E. Schomaker; Stanley J. Zarnoch; William A. Bechtold; David J. Latelle; William G. Burkman; Susan M. Cox

2007-01-01

The Forest Inventory and Analysis (FIA) Program of the Forest Service, U.S. Department of Agriculture, conducts a national inventory of forests across the United States. A systematic subset of permanent inventory plots in 38 States is currently sampled every year for numerous forest health indicators. One of these indicators, crown-condition classification, is designed...

Analysis of Alternative Ring Resonator Designs

DTIC Science & Technology

2014-08-01

the ring strip of the antenna as in the case of the original design. Both the alternative dielectric laminate and the increased thickness laminate...adjustments to the geometry parameters. 2. Ring Resonator Antenna Design The ring resonator is a two port antenna consisting of a ring strip and two...for various soil sample depths indicates that most of the measureable response is from within 2 mm of the resonator antenna strip surface. For the

The Effect of Environmental Field Trips on Student Learning in Middle School

ERIC Educational Resources Information Center

Legutko, Robert S.

2005-01-01

The effect of an environmental field trip on student learning in one middle school in the mid-Atlantic region of the United States was examined. An experimental one-group pretest-posttest group design was implemented on a sample of 579 students which comprised 12 groups. Although a t-test for dependent samples indicated that less than half of the…

Using simulation to improve wildlife surveys: Wintering mallards in Mississippi, USA

USGS Publications Warehouse

Pearse, A.T.; Reinecke, K.J.; Dinsmore, S.J.; Kaminski, R.M.

2009-01-01

Wildlife conservation plans generally require reliable data about population abundance and density. Aerial surveys often can provide these data; however, associated costs necessitate designing and conducting surveys efficiently. We developed methods to simulate population distributions of mallards (Anas platyrhynchos) wintering in western Mississippi, USA, by combining bird observations from three previous strip-transect surveys and habitat data from three sets of satellite images representing conditions when surveys were conducted. For each simulated population distribution, we compared 12 primary survey designs and two secondary design options by using coefficients of variation (CV) of population indices as the primary criterion for assessing survey performance. In all, 3 of the 12 primary designs provided the best precision (CV???11.7%) and performed equally well (WR08082E1d.gif diff???0.6%). Features of the designs that provided the largest gains in precision were optimal allocation of sample effort among strata and configuring the study area into five rather than four strata, to more precisely estimate mallard indices in areas of consistently high density. Of the two secondary design options, we found including a second observer to double the size of strip transects increased precision or decreased costs, whereas ratio estimation using auxiliary habitat data from satellite images did not increase precision appreciably. We recommend future surveys of mallard populations in our study area use the strata we developed, optimally allocate samples among strata, employ PPS or EPS sampling, and include two observers when qualified staff are available. More generally, the methods we developed to simulate population distributions from prior survey data provide a cost-effective method to assess performance of alternative wildlife surveys critical to informing management decisions, and could be extended to account for effects of detectability on estimates of true abundance. ?? 2009 CSIRO.

Conceptual Model of Clinical Governance Information System for Statistical Indicators by Using UML in Two Sample Hospitals

PubMed Central

Jeddi, Fatemeh Rangraz; Farzandipoor, Mehrdad; Arabfard, Masoud; Hosseini, Azam Haj Mohammad

2016-01-01

Objective: The purpose of this study was investigating situation and presenting a conceptual model for clinical governance information system by using UML in two sample hospitals. Background: However, use of information is one of the fundamental components of clinical governance; but unfortunately, it does not pay much attention to information management. Material and Methods: A cross sectional study was conducted in October 2012- May 2013. Data were gathered through questionnaires and interviews in two sample hospitals. Face and content validity of the questionnaire has been confirmed by experts. Data were collected from a pilot hospital and reforms were carried out and Final questionnaire was prepared. Data were analyzed by descriptive statistics and SPSS 16 software. Results: With the scenario derived from questionnaires, UML diagrams are presented by using Rational Rose 7 software. The results showed that 32.14 percent Indicators of the hospitals were calculated. Database was not designed and 100 percent of the hospital’s clinical governance was required to create a database. Conclusion: Clinical governance unit of hospitals to perform its mission, do not have access to all the needed indicators. Defining of Processes and drawing of models and creating of database are essential for designing of information systems. PMID:27147804

Conceptual Model of Clinical Governance Information System for Statistical Indicators by Using UML in Two Sample Hospitals

PubMed Central

Jeddi, Fatemeh Rangraz; Farzandipoor, Mehrdad; Arabfard, Masoud; Hosseini, Azam Haj Mohammad

2014-01-01

Objective: The purpose of this study was investigating situation and presenting a conceptual model for clinical governance information system by using UML in two sample hospitals. Background: However, use of information is one of the fundamental components of clinical governance; but unfortunately, it does not pay much attention to information management. Material and Methods: A cross sectional study was conducted in October 2012- May 2013. Data were gathered through questionnaires and interviews in two sample hospitals. Face and content validity of the questionnaire has been confirmed by experts. Data were collected from a pilot hospital and reforms were carried out and Final questionnaire was prepared. Data were analyzed by descriptive statistics and SPSS 16 software. Results: With the scenario derived from questionnaires, UML diagrams are presented by using Rational Rose 7 software. The results showed that 32.14 percent Indicators of the hospitals were calculated. Database was not designed and 100 percent of the hospital’s clinical governance was required to create a database. Conclusion: Clinical governance unit of hospitals to perform its mission, do not have access to all the needed indicators. Defining of Processes and drawing of models and creating of database are essential for designing of information systems. PMID:24825933

A Study to Determine if a Difference Exists Among the Cumulative Incidence of Acute Respiratory Disease Hospital Admissions of Three Groups of Army Basic Trainees as Defined by the Design of Barracks in Which They Are Housed

DTIC Science & Technology

1989-08-01

number) Using chi-square tests of homogeneity, a selected sample of Army Basic Trainees at Ft. Jackso was studied to determine if there was a...Period of training for sample soldiers was January to May 1985. Results of testing for the female trainees indicated no significant difference in incidence...of ARD among three barracks groups. Results of testing for male trainees indicated statistically significant dif -erences of ARD among each of three

TEMPUS: A facility for containerless electromagnetic processing onboard spacelab

NASA Technical Reports Server (NTRS)

Lenski, H.; Willnecker, R.

1990-01-01

The electromagnetic containerless processing facility TEMPUS was recently assigned for a flight on the IML-2 mission. In comparison to the TEMPUS facility already flown on a sounding rocket, several improvements had to be implemented. These are in particular related to: safety; resource management; and the possibility to process different samples with different requirements in one mission. The basic design of this facility as well as the expected processing capabilities are presented. Two operational aspects turned out to strongly influence the facility design: control of the sample motion (first experimental results indicate that crew or ground interaction will be necessary to minimize residual sample motions during processing); and exchange of RF-coils (during processing in vacuum, evaporated sample materials will condense at the cold surface and may force a coil exchange, when a critical thickness is exceeded).

Self-Reported Health among Older Bangladeshis: How Good a Health Indicator Is It?

ERIC Educational Resources Information Center

Rahman, M. Omar; Barsky, Arthur J.

2003-01-01

Purpose: This study examines the value of self-reported health (SRH) as an indicator of underlying health status in a developing country setting. Design and Methods: Logistic regression methods with adjustments for multistage sampling are used to examine the factors associated with SRH in 2,921 men and women aged 50 and older in rural Bangladesh.…

Effect of Gratitude Educational Intervention on Well-Being Indicators among North Indian Adolescents

ERIC Educational Resources Information Center

Khanna, Pulkit; Singh, Kamlesh

2016-01-01

The aim of the present paper was to study the impact of a gratitude building intervention on adolescents' gratitude and well-being indicators. The sample comprised 177 students aged 11--14 years (M[subscript Age] = 12.29 years, SD = 0.67, 58% male) attending two schools in North India. Using quasi-experimental design, participating classrooms from…

Design and use of mouse control DNA for DNA biomarker extraction and PCR detection from urine: application for transrenal Mycobacterium tuberculosis DNA detection

PubMed Central

Bordelon, Hali; Ricks, Keersten M.; Pask, Megan E.; Russ, Patricia K.; Solinas, Francesca; Baglia, Mark L.; Short, Philip A.; Nel, Andrew; Blackburn, Jonathan; Dheda, Keertan; Zamudio, Carlos; Cáceres, Tatiana; Wright, David W.; Haselton, Frederick R.; Pettit, April C.

2017-01-01

Urine samples are increasingly used for diagnosing infections including Escherichia coli, Ebola virus, and Zika virus. However, extraction and concentration of nucleic acid biomarkers from urine is necessary for many molecular detection strategies such as polymerase chain reaction (PCR). Since urine samples typically have large volumes with dilute biomarker concentrations making them prone to false negatives, another impediment for urine-based diagnostics is the establishment of appropriate controls particularly to rule out false negatives. In this study, a mouse glyceraldehyde 3-phosphate dehydrogenase (GAPDH) DNA target was added to retrospectively collected urine samples from tuberculosis (TB)-infected and TB-uninfected patients to indicate extraction of intact DNA and removal of PCR inhibitors from urine samples. We tested this design on surrogate urine samples, retrospective 1 milliliter (mL) urine samples from patients in Lima, Peru and retrospective 5 mL urine samples from patients in Cape Town, South Africa. Extraction/PCR control DNA was detectable in 97% of clinical samples with no statistically significant differences among groups. Despite the inclusion of this control, there was no difference in the amount of TB IS6110 Tr-DNA detected between TB-infected and TB-uninfected groups except for samples from known HIV-infected patients. We found a increase in TB IS6110 Tr-DNA between TB/HIV co-infected patients compared to TB-uninfected/HIV-infected patients (N=18, p=0.037). The inclusion of an extraction/PCR control DNA to indicate successful DNA extraction and removal of PCR inhibitors should be easily adaptable as a sample preparation control for other acellular sample types. PMID:28285168

Design and use of mouse control DNA for DNA biomarker extraction and PCR detection from urine: Application for transrenal Mycobacterium tuberculosis DNA detection.

PubMed

Bordelon, Hali; Ricks, Keersten M; Pask, Megan E; Russ, Patricia K; Solinas, Francesca; Baglia, Mark L; Short, Philip A; Nel, Andrew; Blackburn, Jonathan; Dheda, Keertan; Zamudio, Carlos; Cáceres, Tatiana; Wright, David W; Haselton, Frederick R; Pettit, April C

2017-05-01

Urine samples are increasingly used for diagnosing infections including Escherichia coli, Ebola virus, and Zika virus. However, extraction and concentration of nucleic acid biomarkers from urine is necessary for many molecular detection strategies such as polymerase chain reaction (PCR). Since urine samples typically have large volumes with dilute biomarker concentrations making them prone to false negatives, another impediment for urine-based diagnostics is the establishment of appropriate controls particularly to rule out false negatives. In this study, a mouse glyceraldehyde 3-phosphate dehydrogenase (GAPDH) DNA target was added to retrospectively collected urine samples from tuberculosis (TB)-infected and TB-uninfected patients to indicate extraction of intact DNA and removal of PCR inhibitors from urine samples. We tested this design on surrogate urine samples, retrospective 1milliliter (mL) urine samples from patients in Lima, Peru and retrospective 5mL urine samples from patients in Cape Town, South Africa. Extraction/PCR control DNA was detectable in 97% of clinical samples with no statistically significant differences among groups. Despite the inclusion of this control, there was no difference in the amount of TB IS6110 Tr-DNA detected between TB-infected and TB-uninfected groups except for samples from known HIV-infected patients. We found an increase in TB IS6110 Tr-DNA between TB/HIV co-infected patients compared to TB-uninfected/HIV-infected patients (N=18, p=0.037). The inclusion of an extraction/PCR control DNA to indicate successful DNA extraction and removal of PCR inhibitors should be easily adaptable as a sample preparation control for other acellular sample types. Copyright © 2017 Elsevier B.V. All rights reserved.

Results Of Routine Strip Effluent Hold Tank, Decontaminated Salt Solution Hold Tank, And Caustic Wash Tank Samples From Modular Caustic-Side Solvent Extraction Unit During Macrobatch 4 Operations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Peters, T. B.; Fink, S. D.

Strip Effluent Hold Tank (SEHT), Decontaminated Salt Solution Hold Tank (DSSHT), and Caustic Wash Tank (CWT) samples from several of the ?microbatches? of Integrated Salt Disposition Project (ISDP) Salt Batch (?Macrobatch?) 4 have been analyzed for {sup 238}Pu, {sup 90}Sr, {sup 137}Cs, and by inductively-coupled plasma emission spectroscopy (ICPES). Furthermore, samples from the CWT have been analyzed by a variety of methods to investigate a decline in the decontamination factor (DF) of the cesium observed at MCU. The results indicate good decontamination performance within process design expectations. While the data set is sparse, the results of this set and themore » previous set of results for Macrobatch 3 samples indicate generally consistent operations. There is no indication of a disruption in plutonium and strontium removal. The average cesium DF and concentration factor (CF) for samples obtained from Macrobatch 4 are slightly lower than for Macrobatch 3, but still well within operating parameters. The DSSHT samples show continued presence of titanium, likely from leaching of the monosodium titanate in Actinide Removal Process (ARP).« less

Psychometric properties of the Depression Anxiety and Stress Scale-21 in older primary care patients.

PubMed

Gloster, Andrew T; Rhoades, Howard M; Novy, Diane; Klotsche, Jens; Senior, Ashley; Kunik, Mark; Wilson, Nancy; Stanley, Melinda A

2008-10-01

The Depression Anxiety Stress Scale (DASS) was designed to efficiently measure the core symptoms of anxiety and depression and has demonstrated positive psychometric properties in adult samples of anxiety and depression patients and student samples. Despite these findings, the psychometric properties of the DASS remain untested in older adults, for whom the identification of efficient measures of these constructs is especially important. To determine the psychometric properties of the DASS 21-item version in older adults, we analyzed data from 222 medical patients seeking treatment to manage worry. Consistent with younger samples, a three-factor structure best fit the data. Results also indicated good internal consistency, excellent convergent validity, and good discriminative validity, especially for the Depression scale. Receiver operating curve analyses indicated that the DASS-21 predicted the diagnostic presence of generalized anxiety disorder and depression as well as other commonly used measures. These data suggest that the DASS may be used with older adults in lieu of multiple scales designed to measure similar constructs, thereby reducing participant burden and facilitating assessment in settings with limited assessment resources.

Measurement of forces applied to handgrips and pedals for a sample population of Mexican males.

PubMed

Lara-Lopez, A; Aguilera-Cortes, L A; Barbosa-Castillo, F

1999-04-01

Equipment design requirements for newly industrializing nations often differ from those of highly industrialized nations. In order to develop a 'culturally relevant' technology in Mexico, this paper reports the results of a study, conducted in Guanajuato state, designed to measure the maximum static forces exerted on pulling handgrips and pedals by seated male subjects. The project included the design and construction of an adjustable measuring apparatus. Handgrip measurements were taken with left and right arms at five different elbow angles; pedal measurements with left and right legs at three different knee angles. The arm data indicate that the relationship between appendage angle and force is similar for these data and those previously reported for a US sample, although there are some significant differences in magnitude. Implications of these results for machinery design are discussed.

Designing single- and multiple-shell sampling schemes for diffusion MRI using spherical code.

PubMed

Cheng, Jian; Shen, Dinggang; Yap, Pew-Thian

2014-01-01

In diffusion MRI (dMRI), determining an appropriate sampling scheme is crucial for acquiring the maximal amount of information for data reconstruction and analysis using the minimal amount of time. For single-shell acquisition, uniform sampling without directional preference is usually favored. To achieve this, a commonly used approach is the Electrostatic Energy Minimization (EEM) method introduced in dMRI by Jones et al. However, the electrostatic energy formulation in EEM is not directly related to the goal of optimal sampling-scheme design, i.e., achieving large angular separation between sampling points. A mathematically more natural approach is to consider the Spherical Code (SC) formulation, which aims to achieve uniform sampling by maximizing the minimal angular difference between sampling points on the unit sphere. Although SC is well studied in the mathematical literature, its current formulation is limited to a single shell and is not applicable to multiple shells. Moreover, SC, or more precisely continuous SC (CSC), currently can only be applied on the continuous unit sphere and hence cannot be used in situations where one or several subsets of sampling points need to be determined from an existing sampling scheme. In this case, discrete SC (DSC) is required. In this paper, we propose novel DSC and CSC methods for designing uniform single-/multi-shell sampling schemes. The DSC and CSC formulations are solved respectively by Mixed Integer Linear Programming (MILP) and a gradient descent approach. A fast greedy incremental solution is also provided for both DSC and CSC. To our knowledge, this is the first work to use SC formulation for designing sampling schemes in dMRI. Experimental results indicate that our methods obtain larger angular separation and better rotational invariance than the generalized EEM (gEEM) method currently used in the Human Connectome Project (HCP).

Disordered Gambling Prevalence: Methodological Innovations in a General Danish Population Survey.

PubMed

Harrison, Glenn W; Jessen, Lasse J; Lau, Morten I; Ross, Don

2018-03-01

We study Danish adult gambling behavior with an emphasis on discovering patterns relevant to public health forecasting and economic welfare assessment of policy. Methodological innovations include measurement of formative in addition to reflective constructs, estimation of prospective risk for developing gambling disorder rather than risk of being falsely negatively diagnosed, analysis with attention to sample weights and correction for sample selection bias, estimation of the impact of trigger questions on prevalence estimates and sample characteristics, and distinguishing between total and marginal effects of risk-indicating factors. The most significant novelty in our design is that nobody was excluded on the basis of their response to a 'trigger' or 'gateway' question about previous gambling history. Our sample consists of 8405 adult Danes. We administered the Focal Adult Gambling Screen to all subjects and estimate prospective risk for disordered gambling. We find that 87.6% of the population is indicated for no detectable risk, 5.4% is indicated for early risk, 1.7% is indicated for intermediate risk, 2.6% is indicated for advanced risk, and 2.6% is indicated for disordered gambling. Correcting for sample weights and controlling for sample selection has a significant effect on prevalence rates. Although these estimates of the 'at risk' fraction of the population are significantly higher than conventionally reported, we infer a significant decrease in overall prevalence rates of detectable risk with these corrections, since gambling behavior is positively correlated with the decision to participate in gambling surveys. We also find that imposing a threshold gambling history leads to underestimation of the prevalence of gambling problems.

Numeric score-based conditional and overall change-in-status indices for ordered categorical data.

PubMed

Lyles, Robert H; Kupper, Lawrence L; Barnhart, Huiman X; Martin, Sandra L

2015-11-30

Planned interventions and/or natural conditions often effect change on an ordinal categorical outcome (e.g., symptom severity). In such scenarios, it is sometimes desirable to assign a priori scores to observed changes in status, typically giving higher weight to changes of greater magnitude. We define change indices for such data based upon a multinomial model for each row of a c × c table, where the rows represent the baseline status categories. We distinguish an index designed to assess conditional changes within each baseline category from two others designed to capture overall change. One of these overall indices measures expected change across a target population. The other is scaled to capture the proportion of total possible change in the direction indicated by the data, so that it ranges from -1 (when all subjects finish in the least favorable category) to +1 (when all finish in the most favorable category). The conditional assessment of change can be informative regardless of how subjects are sampled into the baseline categories. In contrast, the overall indices become relevant when subjects are randomly sampled at baseline from the target population of interest, or when the investigator is able to make certain assumptions about the baseline status distribution in that population. We use a Dirichlet-multinomial model to obtain Bayesian credible intervals for the conditional change index that exhibit favorable small-sample frequentist properties. Simulation studies illustrate the methods, and we apply them to examples involving changes in ordinal responses for studies of sleep deprivation and activities of daily living. Copyright © 2015 John Wiley & Sons, Ltd.

Improved chip design for integrated solid-phase microextraction in on-line proteomic sample preparation.

PubMed

Bergkvist, Jonas; Ekström, Simon; Wallman, Lars; Löfgren, Mikael; Marko-Varga, György; Nilsson, Johan; Laurell, Thomas

2002-04-01

A recently introduced silicon microextraction chip (SMEC), used for on-line proteomic sample preparation, has proved to facilitate the process of protein identification by sample clean up and enrichment of peptides. It is demonstrated that a novel grid-SMEC design improves the operating characteristics for solid-phase microextraction, by reducing dispersion effects and thereby improving the sample preparation conditions. The structures investigated in this paper are treated both numerically and experimentally. The numerical approach is based on finite element analysis of the microfluidic flow in the microchip. The analysis is accomplished by use of the computational fluid dynamics-module FLOTRAN in the ANSYS software package. The modeling and analysis of the previously reported weir-SMEC design indicates some severe drawbacks, that can be reduced by changing the microextraction chip geometry to the grid-SMEC design. The overall analytical performance was thereby improved and also verified by experimental work. Matrix-assisted laser desorption/ionization mass spectra of model peptides extracted from both the weir-SMEC and the new grid-SMEC support the numerical analysis results. Further use of numerical modeling and analysis of the SMEC structures is also discussed and suggested in this work.

The Gifted Rating Scales-School Form: An Analysis of the Standardization Sample Based on Age, Gender, Race, and Diagnostic Efficiency

ERIC Educational Resources Information Center

Pfeiffer, Steven I.; Jarosewich, Tania

2007-01-01

This study analyzes the standardization sample of a new teacher rating scale designed to assist in the identification of gifted students. The Gifted Rating Scales-School Form (GRS-S) is based on a multidimensional model of giftedness. Results indicate no age or race/ethnicity differences on any of the scales and small but significant differences…

Environmental DNA as a Tool for Inventory and Monitoring of Aquatic Vertebrates

DTIC Science & Technology

2017-07-01

geomorphic calculations and description of each reach. Methods Channel Surveys We initially selected reaches based on access and visual indicators...WA 99164 I-2 Environmental DNA lab protocol: designing species-specific qPCR assays Species-specific surveys should use quantitative polymerase...to traditional field sampling with respect to sensitivity, detection probabilities, and cost efficiency. Compared to field surveys , eDNA sampling

EMR Gage Would Measure Coal Thickness Accurately

NASA Technical Reports Server (NTRS)

King, J. D.; Rollwitz, W. L.

1982-01-01

Laboratory tests indicate electron magnetic resonance (EMR) would be effective in measuring thickness of coal overlying rock substrate. In prototype dual-frequency EMR system, Sample is irradiated by two radio frequencies. Signals are mixed, producing sum and difference output frequencies that are detected by receiver. Magnetic field is varied to scan resonant spot through sample. In system designed for field use, electromagnet is U-shaped, so that sample can be adjacent to, rather than inside the probe. Same coil is used for transmitting and receiving.

The INVEST project: investigating the use of evidence synthesis in the design and analysis of clinical trials.

PubMed

Clayton, Gemma L; Smith, Isabelle L; Higgins, Julian P T; Mihaylova, Borislava; Thorpe, Benjamin; Cicero, Robert; Lokuge, Kusal; Forman, Julia R; Tierney, Jayne F; White, Ian R; Sharples, Linda D; Jones, Hayley E

2017-05-15

When designing and analysing clinical trials, using previous relevant information, perhaps in the form of evidence syntheses, can reduce research waste. We conducted the INVEST (INVestigating the use of Evidence Synthesis in the design and analysis of clinical Trials) survey to summarise the current use of evidence synthesis in trial design and analysis, to capture opinions of trialists and methodologists on such use, and to understand any barriers. Our sampling frame was all delegates attending the International Clinical Trials Methodology Conference in November 2015. Respondents were asked to indicate (1) their views on the use of evidence synthesis in trial design and analysis, (2) their own use during the past 10 years and (3) the three greatest barriers to use in practice. Of approximately 638 attendees of the conference, 106 (17%) completed the survey, half of whom were statisticians. Support was generally high for using a description of previous evidence, a systematic review or a meta-analysis in trial design. Generally, respondents did not seem to be using evidence syntheses as often as they felt they should. For example, only 50% (42/84 relevant respondents) had used a meta-analysis to inform whether a trial is needed compared with 74% (62/84) indicating that this is desirable. Only 6% (5/81 relevant respondents) had used a value of information analysis to inform sample size calculations versus 22% (18/81) indicating support for this. Surprisingly large numbers of participants indicated support for, and previous use of, evidence syntheses in trial analysis. For example, 79% (79/100) of respondents indicated that external information about the treatment effect should be used to inform aspects of the analysis. The greatest perceived barrier to using evidence synthesis methods in trial design or analysis was time constraints, followed by a belief that the new trial was the first in the area. Evidence syntheses can be resource-intensive, but their use in informing the design, conduct and analysis of clinical trials is widely considered desirable. We advocate additional research, training and investment in resources dedicated to ways in which evidence syntheses can be undertaken more efficiently, offering the potential for cost savings in the long term.

Digital Accessible Knowledge and well-inventoried sites for birds in Mexico: baseline sites for measuring faunistic change

PubMed Central

Navarro-Sigüenza, Adolfo G.; Martínez-Meyer, Enrique

2016-01-01

Background Faunal change is a basic and fundamental element in ecology, biogeography, and conservation biology, yet vanishingly few detailed studies have documented such changes rigorously over decadal time scales. This study responds to that gap in knowledge, providing a detailed analysis of Digital Accessible Knowledge of the birds of Mexico, designed to marshal DAK to identify sites that were sampled and inventoried rigorously prior to the beginning of major global climate change (1980). Methods We accumulated DAK records for Mexican birds from all relevant online biodiversity data portals. After extensive cleaning steps, we calculated completeness indices for each 0.05° pixel across the country; we also detected ‘hotspots’ of sampling, and calculated completeness indices for these broader areas as well. Sites were designated as well-sampled if they had completeness indices above 80% and >200 associated DAK records. Results We identified 100 individual pixels and 20 broader ‘hotspots’ of sampling that were demonstrably well-inventoried prior to 1980. These sites are catalogued and documented to promote and enable resurvey efforts that can document events of avifaunal change (and non-change) across the country on decadal time scales. Conclusions Development of repeated surveys for many sites across Mexico, and particularly for sites for which historical surveys document their avifaunas prior to major climate change processes, would pay rich rewards in information about distributional dynamics of Mexican birds. PMID:27651986

Sampling Design and Procedures for Fixed Surface-Water Sites in the Georgia-Florida Coastal Plain Study Unit, 1993

DTIC Science & Technology

1995-01-01

Station number Station drainage area (km2) Land resource province Land-use description Fixed-site type Altamaha River near Everett City, Ga . 02226160...Creek near Tallahassee, Fla. 02326838 27 SCP suburban indicator Little River near Ty Ty, Ga . 02317797 334 SCP agriculture (mixed row crops) indicator...Middle Prong St. Marys River near Taylor, Fla. 02229000 324 CFW silviculture indicator Tucsawhatchee Creek near Hawkinsville, Ga . 02215100 422 SCP

Data from exploratory sampling of groundwater in selected oil and gas areas of coastal Los Angeles County and Kern and Kings Counties in southern San Joaquin Valley, 2014–15: California oil, gas, and groundwater project

USGS Publications Warehouse

Dillon, David B.; Davis, Tracy A.; Landon, Matthew K.; Land, Michael T.; Wright, Michael T.; Kulongoski, Justin T.

2016-12-09

Exploratory sampling of groundwater in coastal Los Angeles County and Kern and Kings Counties of the southern San Joaquin Valley was done by the U.S. Geological Survey from September 2014 through January 2015 as part of the California State Water Resources Control Board’s Water Quality in Areas of Oil and Gas Production Regional Groundwater Monitoring Program. The Regional Groundwater Monitoring Program was established in response to the California Senate Bill 4 of 2013 mandating that the California State Water Resources Control Board design and implement a groundwater-monitoring program to assess potential effects of well-stimulation treatments on groundwater resources in California. The U.S. Geological Survey is in cooperation with the California State Water Resources Control Board to collaboratively implement the Regional Groundwater Monitoring Program through the California Oil, Gas, and Groundwater Project. Many researchers have documented the utility of different suites of chemical tracers for evaluating the effects of oil and gas development on groundwater quality. The purpose of this exploratory sampling effort was to determine whether tracers reported in the literature could be used effectively in California. This reconnaissance effort was not designed to assess the effects of oil and gas on groundwater quality in the sampled areas. A suite of water-quality indicators and geochemical tracers were sampled at groundwater sites in selected areas that have extensive oil and gas development. Groundwater samples were collected from a total of 51 wells, including 37 monitoring wells at 17 multiple-well monitoring sites in coastal Los Angeles County and 5 monitoring wells and 9 water-production wells in southern San Joaquin Valley, primarily in Kern and Kings Counties. Groundwater samples were analyzed for field waterquality indicators; organic constituents, including volatile and semi-volatile organic compounds and dissolved organic carbon indicators; naturally present inorganic constituents, including trace elements, nutrients, major and minor ions, and iron species; naturally present stable and radioactive isotopes; dissolved noble gases; dissolved standard and hydrocarbon gases, δ13C of methane, ethane, and δ2 H of methane. In total, 249 constituents and water-quality indicators were measured. Four types of quality-control samples (blanks, replicates, matrix spikes, and surrogates spiked in environmental and blank samples) were collected at approximately 10 percent of the wells. The quality-control data were used to determine whether the groundwater-sample data were of sufficient quality for the measured analytes to be used as potential indicators of oil and gas effects. The data from the 51 groundwater samples and from the quality-control samples are presented in this report.

Sampling design for long-term regional trends in marine rocky intertidal communities

USGS Publications Warehouse

Irvine, Gail V.; Shelley, Alice

2013-01-01

Probability-based designs reduce bias and allow inference of results to the pool of sites from which they were chosen. We developed and tested probability-based designs for monitoring marine rocky intertidal assemblages at Glacier Bay National Park and Preserve (GLBA), Alaska. A multilevel design was used that varied in scale and inference. The levels included aerial surveys, extensive sampling of 25 sites, and more intensive sampling of 6 sites. Aerial surveys of a subset of intertidal habitat indicated that the original target habitat of bedrock-dominated sites with slope ≤30° was rare. This unexpected finding illustrated one value of probability-based surveys and led to a shift in the target habitat type to include steeper, more mixed rocky habitat. Subsequently, we evaluated the statistical power of different sampling methods and sampling strategies to detect changes in the abundances of the predominant sessile intertidal taxa: barnacles Balanomorpha, the mussel Mytilus trossulus, and the rockweed Fucus distichus subsp. evanescens. There was greatest power to detect trends in Mytilus and lesser power for barnacles and Fucus. Because of its greater power, the extensive, coarse-grained sampling scheme was adopted in subsequent years over the intensive, fine-grained scheme. The sampling attributes that had the largest effects on power included sampling of “vertical” line transects (vs. horizontal line transects or quadrats) and increasing the number of sites. We also evaluated the power of several management-set parameters. Given equal sampling effort, sampling more sites fewer times had greater power. The information gained through intertidal monitoring is likely to be useful in assessing changes due to climate, including ocean acidification; invasive species; trampling effects; and oil spills.

Design and evaluation of a field study on the contamination of selected volatile organic compounds and wastewater-indicator compounds in blanks and groundwater samples

USGS Publications Warehouse

Thiros, Susan A.; Bender, David A.; Mueller, David K.; Rose, Donna L.; Olsen, Lisa D.; Martin, Jeffrey D.; Bernard, Bruce; Zogorski, John S.

2011-01-01

The Field Contamination Study (FCS) was designed to determine the field processes that tend to result in clean field blanks and to identify potential sources of contamination to blanks collected in the field from selected volatile organic compounds (VOCs) and wastewater-indicator compounds (WICs). The VOCs and WICs analyzed in the FCS were detected in blanks collected by the U.S. Geological Survey (USGS) National Water-Quality Assessment (NAWQA) Program during 1996–2008 and 2002–08, respectively. To minimize the number of variables, the study required ordering of supplies just before sampling, storage of supplies and equipment in clean areas, and use of adequate amounts of purge-and-trap volatile-grade methanol and volatile pesticide-grade blank water (VPBW) to clean sampling equipment and to collect field blanks.Blanks and groundwater samples were collected during 2008–09 at 16 sites, which were a mix of water-supply and monitoring wells, located in 9 States. Five different sample types were collected for the FCS at each site: (1) a source-solution blank collected at the USGS National Water Quality Laboratory (NWQL) using laboratory-purged VPBW, (2) source-solution blanks collected in the field using laboratory-purged VPBW, (3) source-solution blanks collected in the field using field-purged VPBW, (4) a field blank collected using field-purged VPBW, and (5) a groundwater sample collected from a well. The source-solution blank and field-blank analyses were used to identify, quantify, and document extrinsic contamination and to help determine the sources and causes of data-quality problems that can affect groundwater samples.Concentrations of compounds detected in FCS analyses were quantified and results were stored in the USGS National Water Information System database after meeting rigorous identification and quantification criteria. The study also utilized information provided by laboratory analysts about evidence indicating the presence of selected compounds, using less rigorous identification criteria than is required for reporting data to the National Water Information System database. For the FCS, these data are considered adequate to indicate "evidence of presence," and were used only for diagnostic purposes. Evidence of VOCs and WICs at low concentrations near or less than the long-term method detection level can indicate a contamination problem that could affect future datasets if method detection levels were ever to be lowered.

Statistical power for nonequivalent pretest-posttest designs. The impact of change-score versus ANCOVA models.

PubMed

Oakes, J M; Feldman, H A

2001-02-01

Nonequivalent controlled pretest-posttest designs are central to evaluation science, yet no practical and unified approach for estimating power in the two most widely used analytic approaches to these designs exists. This article fills the gap by presenting and comparing useful, unified power formulas for ANCOVA and change-score analyses, indicating the implications of each on sample-size requirements. The authors close with practical recommendations for evaluators. Mathematical details and a simple spreadsheet approach are included in appendices.

A design methodology for nonlinear systems containing parameter uncertainty

NASA Technical Reports Server (NTRS)

Young, G. E.; Auslander, D. M.

1983-01-01

In the present design methodology for nonlinear systems containing parameter uncertainty, a generalized sensitivity analysis is incorporated which employs parameter space sampling and statistical inference. For the case of a system with j adjustable and k nonadjustable parameters, this methodology (which includes an adaptive random search strategy) is used to determine the combination of j adjustable parameter values which maximize the probability of those performance indices which simultaneously satisfy design criteria in spite of the uncertainty due to k nonadjustable parameters.

The Predictive Validity of the Tilburg Frailty Indicator: Disability, Health Care Utilization, and Quality of Life in a Population at Risk

ERIC Educational Resources Information Center

Gobbens, Robbert J. J.; van Assen, Marcel A. L. M.; Luijkx, Katrien G.; Schols, Jos M. G. A.

2012-01-01

Purpose: To assess the predictive validity of frailty and its domains (physical, psychological, and social), as measured by the Tilburg Frailty Indicator (TFI), for the adverse outcomes disability, health care utilization, and quality of life. Design and Methods: The predictive validity of the TFI was tested in a representative sample of 484…

Microbial Indicator Profiling of Fresh Produce and Environmental Samples from Farms and Packing Facilities in Northern Mexico.

PubMed

Heredia, Norma; Caballero, Cindy; Cárdenas, Carmen; Molina, Karina; García, Rafael; Solís, Luisa; Burrowes, Vanessa; Bartz, Faith E; de Aceituno, Anna Fabiszewski; Jaykus, Lee-Ann; García, Santos; Leon, Juan

2016-07-01

To compare microbiological indicator and pathogen contamination among different types of fresh produce and environmental samples along the production chain, 636 samples of produce (rinsates from cantaloupe melons, jalapeño peppers, and tomatoes) and environmental samples (rinsates from hands of workers, soil, and water) were collected at four successive steps in the production process (from the field before harvest through the packing facility) on 11 farms in northern Mexico during 2011 and 2012. Samples were assayed for enteric pathogens (Escherichia coli O157:H7, other Shiga toxigenic E. coli, Salmonella, and Listeria monocytogenes) and microbial indicators (coliforms, other E. coli strains, and Enterococcus spp.). Salmonella was the only pathogen detected; it was found in one preharvest jalapeño sample (detection limits: 0.0033 CFU/ml in produce and hand samples, 0.0013 CFU/ml in water, and 0.04 CFU/g in soil). Microbial indicator profiles for produce, worker hands, and soil from jalapeño and tomato farms were similar, but cantaloupe farm samples had higher indicator levels (P < 0.05 for all comparisons) on fruit (6.5, 2.8, and 7.2 log CFU per fruit) and hands (6.6, 3.1, and 7.1 log CFU per hand) for coliforms, E. coli, and Enterococcus, respectively, and lower E. coli levels in soil (<1 CFU/g). In water from tomato farms, E. coli indicators were significantly more prevalent (70 to 89% of samples were positive; P = 0.01 to 0.02), and geometric mean levels were higher (0.3 to 0.6 log CFU/100 ml) than those in cantaloupe farm water (32 to 38% of samples were positive, geometric mean <1 CFU/100 ml). Microbial indicators were present during all production steps, but prevalence and levels were generally highest at the final on-farm production step (the packing facility) (P < 0.03 for significant comparisons). The finding that microbial contamination on produce farms is influenced by produce type and production step can inform the design of effective approaches to mitigate microbial contamination.

Optimal design of monitoring networks for multiple groundwater quality parameters using a Kalman filter: application to the Irapuato-Valle aquifer.

PubMed

Júnez-Ferreira, H E; Herrera, G S; González-Hita, L; Cardona, A; Mora-Rodríguez, J

2016-01-01

A new method for the optimal design of groundwater quality monitoring networks is introduced in this paper. Various indicator parameters were considered simultaneously and tested for the Irapuato-Valle aquifer in Mexico. The steps followed in the design were (1) establishment of the monitoring network objectives, (2) definition of a groundwater quality conceptual model for the study area, (3) selection of the parameters to be sampled, and (4) selection of a monitoring network by choosing the well positions that minimize the estimate error variance of the selected indicator parameters. Equal weight for each parameter was given to most of the aquifer positions and a higher weight to priority zones. The objective for the monitoring network in the specific application was to obtain a general reconnaissance of the water quality, including water types, water origin, and first indications of contamination. Water quality indicator parameters were chosen in accordance with this objective, and for the selection of the optimal monitoring sites, it was sought to obtain a low-uncertainty estimate of these parameters for the entire aquifer and with more certainty in priority zones. The optimal monitoring network was selected using a combination of geostatistical methods, a Kalman filter and a heuristic optimization method. Results show that when monitoring the 69 locations with higher priority order (the optimal monitoring network), the joint average standard error in the study area for all the groundwater quality parameters was approximately 90 % of the obtained with the 140 available sampling locations (the set of pilot wells). This demonstrates that an optimal design can help to reduce monitoring costs, by avoiding redundancy in data acquisition.

Understanding and comparisons of different sampling approaches for the Fourier Amplitudes Sensitivity Test (FAST)

PubMed Central

Xu, Chonggang; Gertner, George

2013-01-01

Fourier Amplitude Sensitivity Test (FAST) is one of the most popular uncertainty and sensitivity analysis techniques. It uses a periodic sampling approach and a Fourier transformation to decompose the variance of a model output into partial variances contributed by different model parameters. Until now, the FAST analysis is mainly confined to the estimation of partial variances contributed by the main effects of model parameters, but does not allow for those contributed by specific interactions among parameters. In this paper, we theoretically show that FAST analysis can be used to estimate partial variances contributed by both main effects and interaction effects of model parameters using different sampling approaches (i.e., traditional search-curve based sampling, simple random sampling and random balance design sampling). We also analytically calculate the potential errors and biases in the estimation of partial variances. Hypothesis tests are constructed to reduce the effect of sampling errors on the estimation of partial variances. Our results show that compared to simple random sampling and random balance design sampling, sensitivity indices (ratios of partial variances to variance of a specific model output) estimated by search-curve based sampling generally have higher precision but larger underestimations. Compared to simple random sampling, random balance design sampling generally provides higher estimation precision for partial variances contributed by the main effects of parameters. The theoretical derivation of partial variances contributed by higher-order interactions and the calculation of their corresponding estimation errors in different sampling schemes can help us better understand the FAST method and provide a fundamental basis for FAST applications and further improvements. PMID:24143037

Understanding and comparisons of different sampling approaches for the Fourier Amplitudes Sensitivity Test (FAST).

PubMed

Xu, Chonggang; Gertner, George

2011-01-01

Fourier Amplitude Sensitivity Test (FAST) is one of the most popular uncertainty and sensitivity analysis techniques. It uses a periodic sampling approach and a Fourier transformation to decompose the variance of a model output into partial variances contributed by different model parameters. Until now, the FAST analysis is mainly confined to the estimation of partial variances contributed by the main effects of model parameters, but does not allow for those contributed by specific interactions among parameters. In this paper, we theoretically show that FAST analysis can be used to estimate partial variances contributed by both main effects and interaction effects of model parameters using different sampling approaches (i.e., traditional search-curve based sampling, simple random sampling and random balance design sampling). We also analytically calculate the potential errors and biases in the estimation of partial variances. Hypothesis tests are constructed to reduce the effect of sampling errors on the estimation of partial variances. Our results show that compared to simple random sampling and random balance design sampling, sensitivity indices (ratios of partial variances to variance of a specific model output) estimated by search-curve based sampling generally have higher precision but larger underestimations. Compared to simple random sampling, random balance design sampling generally provides higher estimation precision for partial variances contributed by the main effects of parameters. The theoretical derivation of partial variances contributed by higher-order interactions and the calculation of their corresponding estimation errors in different sampling schemes can help us better understand the FAST method and provide a fundamental basis for FAST applications and further improvements.

A field test of three LQAS designs to assess the prevalence of acute malnutrition.

PubMed

Deitchler, Megan; Valadez, Joseph J; Egge, Kari; Fernandez, Soledad; Hennigan, Mary

2007-08-01

The conventional method for assessing the prevalence of Global Acute Malnutrition (GAM) in emergency settings is the 30 x 30 cluster-survey. This study describes alternative approaches: three Lot Quality Assurance Sampling (LQAS) designs to assess GAM. The LQAS designs were field-tested and their results compared with those from a 30 x 30 cluster-survey. Computer simulations confirmed that small clusters instead of a simple random sample could be used for LQAS assessments of GAM. Three LQAS designs were developed (33 x 6, 67 x 3, Sequential design) to assess GAM thresholds of 10, 15 and 20%. The designs were field-tested simultaneously with a 30 x 30 cluster-survey in Siraro, Ethiopia during June 2003. Using a nested study design, anthropometric, morbidity and vaccination data were collected on all children 6-59 months in sampled households. Hypothesis tests about GAM thresholds were conducted for each LQAS design. Point estimates were obtained for the 30 x 30 cluster-survey and the 33 x 6 and 67 x 3 LQAS designs. Hypothesis tests showed GAM as <10% for the 33 x 6 design and GAM as > or =10% for the 67 x 3 and Sequential designs. Point estimates for the 33 x 6 and 67 x 3 designs were similar to those of the 30 x 30 cluster-survey for GAM (6.7%, CI = 3.2-10.2%; 8.2%, CI = 4.3-12.1%, 7.4%, CI = 4.8-9.9%) and all other indicators. The CIs for the LQAS designs were only slightly wider than the CIs for the 30 x 30 cluster-survey; yet the LQAS designs required substantially less time to administer. The LQAS designs provide statistically appropriate alternatives to the more time-consuming 30 x 30 cluster-survey. However, additional field-testing is needed using independent samples rather than a nested study design.

Where do the Field Plots Belong? A Multiple-Constraint Sampling Design for the BigFoot Project

NASA Astrophysics Data System (ADS)

Kennedy, R. E.; Cohen, W. B.; Kirschbaum, A. A.; Gower, S. T.

2002-12-01

A key component of a MODIS validation project is effective characterization of biophysical measures on the ground. Fine-grain ecological field measurements must be placed strategically to capture variability at the scale of the MODIS imagery. Here we describe the BigFoot project's revised sampling scheme, designed to simultaneously meet three important goals: capture landscape variability, avoid spatial autocorrelation between field plots, and minimize time and expense of field sampling. A stochastic process places plots in clumped constellations to reduce field sampling costs, while minimizing spatial autocorrelation. This stochastic process is repeated, creating several hundred realizations of plot constellations. Each constellation is scored and ranked according to its ability to match landscape variability in several Landsat-based spectral indices, and its ability to minimize field sampling costs. We show how this approach has recently been used to place sample plots at the BigFoot project's two newest study areas, one in a desert system and one in a tundra system. We also contrast this sampling approach to that already used at the four prior BigFoot project sites.

Reliability and construct validity of the Participation in Life Activities Scale for children and adolescents with asthma: an instrument evaluation study.

PubMed

Kintner, Eileen K; Sikorskii, Alla

2008-06-04

The purpose of this study was to evaluate the reliability and construct validity of the Participation in Life Activities Scale, an instrument designed to measure older school-age child and early adolescent level of involvement in chosen pursuits. A cross-sectional design was used. The convenience sample consisted of 313 school-age children and early adolescents with asthma, ages 9-15 years. The self-report summative scale of interest is a 3-indicator survey. Higher scores are reflective of higher levels of participation. Internal consistency reliability and construct validity for the entire sample and sub groups of the sample were evaluated. The instrument was deemed sound for the entire sample as well as sub groups based on sex, race, age, socioeconomic status, and severity of illness. Cronbach's alpha coefficient for internal consistency reliability for the entire sample was .74. Exploratory factor analysis indicated a single component solution (loadings .79-.85) accounting for 66% of the explained variance. Construct validity was established by testing the posed relationship between participation in life activities scores and severity of illness. Confirmatory factor analysis revealed a good fit between the data and specified model, chi2(10, n = 302) = 8.074, p = .62. This instrument could be used (a) in clinical settings to diagnose restricted participation in desired activities, guide decision-making about treatment plans to increase participation, and motivate behavioral change in the management of asthma; and (b) in research settings to explore factors influencing and consequences of restricted and unrestricted participation, and as an outcome measure to evaluate the effectiveness of programs designed to foster child and early adolescent management of asthma.

Development of a portable petroleum by-products chemical sensor, phase 1 and 2 report.

DOT National Transportation Integrated Search

2006-07-31

We have proposed to tailor design nanoparticle based chemical sensors for the sensitive, selective and field portable analyses of soil samples for petroleum spill indicating hydrocarbons (such as benzene, toluene, ethyl-benzenes, xylenes, PCBs, trich...

Engineering properties of resin modified pavement (RMP) for mechanistic design

NASA Astrophysics Data System (ADS)

Anderton, Gary Lee

1997-11-01

The research study described in this report focuses on determining the engineering properties of the resin modified pavement (RMP) material relating to pavement performance, and then developing a rational mechanistic design procedure to replace the current empirical design procedure. A detailed description of RMP is provided, including a review of the available literature on this relatively new pavement technology. Field evaluations of four existing and two new RMP project sites were made to assess critical failure modes and to obtain pavement samples for subsequent laboratory testing. Various engineering properties of laboratory-produced and field-recovered samples of RMP were measured and analyzed. The engineering properties evaluated included those relating to the material's stiffness, strength, thermal properties, and traffic-related properties. Comparisons of these data to typical values for asphalt concrete and portland cement concrete were made to relate the physical nature of RMP to more common pavement surfacing materials. A mechanistic design procedure was developed to determine appropriate thickness profiles of RMP, using stiffness and fatigue properties determined by this study. The design procedure is based on the U.S. Army Corps of Engineers layered elastic method for airfield flexible pavements. The WESPAVE computer program was used to demonstrate the new design procedure for a hypothetical airfield apron design. The results of the study indicated that RMP is a relatively stiff, viscoelastic pavement surfacing material with many of its strength and stiffness properties falling between those of typical asphalt concrete and portland cement concrete. The RMP's thermal and traffic-related properties indicated favorable field performance. The layered elastic design approach appeared to be a reasonable and practical method for RMP mechanistic pavement design, and this design procedure was recommended for future use and development.

Assessment of Validity, Reliability and Difficulty Indices for Teacher-Built Physics Exam Questions in First Year High School

ERIC Educational Resources Information Center

Jandaghi, Gholamreza

2010-01-01

The purpose of the research is to determine high school teachers' skill rate in designing exam questions in physics subject. The statistical population was all of physics exam shits for two semesters in one school year from which a sample of 364 exam shits was drawn using multistage cluster sampling. Two experts assessed the shits and by using…

How Much Confidence Can We Have in EU-SILC? Complex Sample Designs and the Standard Error of the Europe 2020 Poverty Indicators

ERIC Educational Resources Information Center

Goedeme, Tim

2013-01-01

If estimates are based on samples, they should be accompanied by appropriate standard errors and confidence intervals. This is true for scientific research in general, and is even more important if estimates are used to inform and evaluate policy measures such as those aimed at attaining the Europe 2020 poverty reduction target. In this article I…

Optimization of Decision-Making for Spatial Sampling in the North China Plain, Based on Remote-Sensing a Priori Knowledge

NASA Astrophysics Data System (ADS)

Feng, J.; Bai, L.; Liu, S.; Su, X.; Hu, H.

2012-07-01

In this paper, the MODIS remote sensing data, featured with low-cost, high-timely and moderate/low spatial resolutions, in the North China Plain (NCP) as a study region were firstly used to carry out mixed-pixel spectral decomposition to extract an useful regionalized indicator parameter (RIP) (i.e., an available ratio, that is, fraction/percentage, of winter wheat planting area in each pixel as a regionalized indicator variable (RIV) of spatial sampling) from the initial selected indicators. Then, the RIV values were spatially analyzed, and the spatial structure characteristics (i.e., spatial correlation and variation) of the NCP were achieved, which were further processed to obtain the scalefitting, valid a priori knowledge or information of spatial sampling. Subsequently, founded upon an idea of rationally integrating probability-based and model-based sampling techniques and effectively utilizing the obtained a priori knowledge or information, the spatial sampling models and design schemes and their optimization and optimal selection were developed, as is a scientific basis of improving and optimizing the existing spatial sampling schemes of large-scale cropland remote sensing monitoring. Additionally, by the adaptive analysis and decision strategy the optimal local spatial prediction and gridded system of extrapolation results were able to excellently implement an adaptive report pattern of spatial sampling in accordance with report-covering units in order to satisfy the actual needs of sampling surveys.

Learning Strategies in Matching to Sample: If-then and Configural Learning by Pigeons

PubMed Central

Katz, Jeffrey S.; Bodily, Kent D.; Wright, Anthony A.

2008-01-01

Pigeons learned a matching-to-sample task with a split training-set design in which half of the stimulus displays were untrained and tested following acquisition. Transfer to the untrained displays along with no novel-stimulus transfer indicated that these pigeons learned the task (partially) via if-then rules. Comparisons to other performance measures indicated that they also partially learned the task via configural learning (learning the gestalt of the whole stimulus display). Differences in the FR-sample requirement (1 vs. 20) had no systematic effect on the type of learning or level of learning obtained. Differences from a previous study (Wright, 1997) are discussed, including the effect of displaying the stimuli vertically (traditional display orientation) or horizontally from the floor. PMID:18079071

Monitoring bacterial indicators of water quality in a tidally influenced delta: A Sisyphean pursuit.

PubMed

Partyka, Melissa L; Bond, Ronald F; Chase, Jennifer A; Atwill, Edward R

2017-02-01

The Sacramento-San Joaquin Delta Estuary (Delta) is the confluence of two major watersheds draining the Western Sierra Nevada mountains into the Central Valley of California, ultimately terminating into San Francisco Bay. We sampled 88 sites once a month for two years (2006-2008) over 87 separate sampling events for a total of 1740 samples. Water samples were analyzed for fecal indicator bacteria (Escherichia coli, enterococci and fecal coliforms), and 53 other physiochemical, land use, and environmental characteristics. The purpose of the study was to create a baseline of microbial water quality in the Delta and to identify various factors (climatic, land use, tidal, etc.) that were associated with elevated concentrations of indicator bacteria. Fecal indicator bacteria generally had weak to modest relationships to environmental conditions; the strength and direction of which varied for each microbial indicator, drainage region, and across seasons. Measured and unmeasured, site-specific effects accounted for large portions of variance in model predictions (ρ=0.086 to 0.255), indicating that spatial autocorrelation was a major component of water quality outcomes. The effects of tidal cycling and lack of connectivity between waterways and surrounding landscapes likely contributed to the lack of association between local land uses and microbial outcomes, though weak associations may also be indicative of mismatched spatiotemporal scales. The complex nature of this system necessitates continued monitoring and regular updates to statistical models designed to predict microbial water quality. Copyright © 2016 Elsevier B.V. All rights reserved.

Test and evaluation of the Argonne BPAC10 Series air chamber calorimeter designed for 20 minute measurements

DOE Office of Scientific and Technical Information (OSTI.GOV)

Perry, R.B.; Fiarman, S.; Jung, E.A.

1990-10-01

This paper is the final report on DOE-OSS Task ANLE88002 Fast Air Chamber Calorimetry.'' The task objective was to design, construct, and test an isothermal air chamber calorimeter for plutonium assay of bulk samples that would meet the following requirements for sample power measurement: average sample measurement time less than 20 minutes. Measurement of samples with power output up to 10 W. Precision of better than 1% RSD for sample power greater than 1 W. Precision better than 0.010 watt SD, for sample power less than 1 W. This report gives a description of the calorimeter hardware and software andmore » discusses the test results. The instrument operating procedure, included as an appendix, gives examples of typical input/output and explains the menu driven software. Sample measurement time of less than 20 minutes was attained by pre-equilibration of the samples in low cost precision preheaters and by prediction of equilibrium measurements. Tests at the TA55 Plutonium Facility at Los Alamos National Laboratory, on typical samples, indicates that the instrument meets all the measurement requirements.« less

An efficient adaptive sampling strategy for global surrogate modeling with applications in multiphase flow simulation

NASA Astrophysics Data System (ADS)

Mo, S.; Lu, D.; Shi, X.; Zhang, G.; Ye, M.; Wu, J.

2016-12-01

Surrogate models have shown remarkable computational efficiency in hydrological simulations involving design space exploration, sensitivity analysis, uncertainty quantification, etc. The central task of constructing a global surrogate models is to achieve a prescribed approximation accuracy with as few original model executions as possible, which requires a good design strategy to optimize the distribution of data points in the parameter domains and an effective stopping criterion to automatically terminate the design process when desired approximation accuracy is achieved. This study proposes a novel adaptive sampling strategy, which starts from a small number of initial samples and adaptively selects additional samples by balancing the collection in unexplored regions and refinement in interesting areas. We define an efficient and effective evaluation metric basing on Taylor expansion to select the most promising potential samples from candidate points, and propose a robust stopping criterion basing on the approximation accuracy at new points to guarantee the achievement of desired accuracy. The numerical results of several benchmark analytical functions indicate that the proposed approach is more computationally efficient and robust than the widely used maximin distance design and two other well-known adaptive sampling strategies. The application to two complicated multiphase flow problems further demonstrates the efficiency and effectiveness of our method in constructing global surrogate models for high-dimensional and highly nonlinear problems. Acknowledgements: This work was financially supported by the National Nature Science Foundation of China grants No. 41030746 and 41172206.

Combining band recovery data and Pollock's robust design to model temporary and permanent emigration

USGS Publications Warehouse

Lindberg, M.S.; Kendall, W.L.; Hines, J.E.; Anderson, M.G.

2001-01-01

Capture-recapture models are widely used to estimate demographic parameters of marked populations. Recently, this statistical theory has been extended to modeling dispersal of open populations. Multistate models can be used to estimate movement probabilities among subdivided populations if multiple sites are sampled. Frequently, however, sampling is limited to a single site. Models described by Burnham (1993, in Marked Individuals in the Study of Bird Populations, 199-213), which combined open population capture-recapture and band-recovery models, can be used to estimate permanent emigration when sampling is limited to a single population. Similarly, Kendall, Nichols, and Hines (1997, Ecology 51, 563-578) developed models to estimate temporary emigration under Pollock's (1982, Journal of Wildlife Management 46, 757-760) robust design. We describe a likelihood-based approach to simultaneously estimate temporary and permanent emigration when sampling is limited to a single population. We use a sampling design that combines the robust design and recoveries of individuals obtained immediately following each sampling period. We present a general form for our model where temporary emigration is a first-order Markov process, and we discuss more restrictive models. We illustrate these models with analysis of data on marked Canvasback ducks. Our analysis indicates that probability of permanent emigration for adult female Canvasbacks was 0.193 (SE = 0.082) and that birds that were present at the study area in year i - 1 had a higher probability of presence in year i than birds that were not present in year i - 1.

An assessment of Lot Quality Assurance Sampling to evaluate malaria outcome indicators: extending malaria indicator surveys.

PubMed

Biedron, Caitlin; Pagano, Marcello; Hedt, Bethany L; Kilian, Albert; Ratcliffe, Amy; Mabunda, Samuel; Valadez, Joseph J

2010-02-01

Large investments and increased global prioritization of malaria prevention and treatment have resulted in greater emphasis on programme monitoring and evaluation (M&E) in many countries. Many countries currently use large multistage cluster sample surveys to monitor malaria outcome indicators on a regional and national level. However, these surveys often mask local-level variability important to programme management. Lot Quality Assurance Sampling (LQAS) has played a valuable role for local-level programme M&E. If incorporated into these larger surveys, it would provide a comprehensive M&E plan at little, if any, extra cost. The Mozambique Ministry of Health conducted a Malaria Indicator Survey (MIS) in June and July 2007. We applied LQAS classification rules to the 345 sampled enumeration areas to demonstrate identifying high- and low-performing areas with respect to two malaria program indicators-'household possession of any bednet' and 'household possession of any insecticide-treated bednet (ITN)'. As shown by the MIS, no province in Mozambique achieved the 70% coverage target for household possession of bednets or ITNs. By applying LQAS classification rules to the data, we identify 266 of the 345 enumeration areas as having bednet coverage severely below the 70% target. An additional 73 were identified with low ITN coverage. This article demonstrates the feasibility of integrating LQAS into multistage cluster sampling surveys and using these results to support a comprehensive national, regional and local programme M&E system. Furthermore, in the recommendations we outlined how to integrate the Large Country-LQAS design into macro-surveys while still obtaining results available through current sampling practices.

Application of Taguchi L16 design method for comparative study of ability of 3A zeolite in removal of Rhodamine B and Malachite green from environmental water samples.

PubMed

Rahmani, Mashaallah; Kaykhaii, Massoud; Sasani, Mojtaba

2018-01-05

This study aimed to investigate the efficiency of 3A zeolite as a novel adsorbent for removal of Rhodamine B and Malachite green dyes from water samples. To increase the removal efficiency, effecting parameters on adsorption process were investigated and optimized by adopting Taguchi design of experiments approach. The percentage contribution of each parameter on the removal of Rhodamine B and Malachite green dyes determined using ANOVA and showed that the most effective parameters in removal of RhB and MG by 3A zeolite are initial concentration of dye and pH, respectively. Under optimized condition, the amount predicted by Taguchi design method and the value obtained experimentally, showed good closeness (more than 94.86%). Good adsorption efficiency obtained for proposed methods indicates that, the 3A zeolite is capable to remove the significant amounts of Rhodamine B and Malachite green from environmental water samples. Copyright © 2017 Elsevier B.V. All rights reserved.

Application of Taguchi L16 design method for comparative study of ability of 3A zeolite in removal of Rhodamine B and Malachite green from environmental water samples

NASA Astrophysics Data System (ADS)

Rahmani, Mashaallah; Kaykhaii, Massoud; Sasani, Mojtaba

2018-01-01

This study aimed to investigate the efficiency of 3A zeolite as a novel adsorbent for removal of Rhodamine B and Malachite green dyes from water samples. To increase the removal efficiency, effecting parameters on adsorption process were investigated and optimized by adopting Taguchi design of experiments approach. The percentage contribution of each parameter on the removal of Rhodamine B and Malachite green dyes determined using ANOVA and showed that the most effective parameters in removal of RhB and MG by 3A zeolite are initial concentration of dye and pH, respectively. Under optimized condition, the amount predicted by Taguchi design method and the value obtained experimentally, showed good closeness (more than 94.86%). Good adsorption efficiency obtained for proposed methods indicates that, the 3A zeolite is capable to remove the significant amounts of Rhodamine B and Malachite green from environmental water samples.

Inference with viral quasispecies diversity indices: clonal and NGS approaches.

PubMed

Gregori, Josep; Salicrú, Miquel; Domingo, Esteban; Sanchez, Alex; Esteban, Juan I; Rodríguez-Frías, Francisco; Quer, Josep

2014-04-15

Given the inherent dynamics of a viral quasispecies, we are often interested in the comparison of diversity indices of sequential samples of a patient, or in the comparison of diversity indices of virus in groups of patients in a treated versus control design. It is then important to make sure that the diversity measures from each sample may be compared with no bias and within a consistent statistical framework. In the present report, we review some indices often used as measures for viral quasispecies complexity and provide means for statistical inference, applying procedures taken from the ecology field. In particular, we examine the Shannon entropy and the mutation frequency, and we discuss the appropriateness of different normalization methods of the Shannon entropy found in the literature. By taking amplicons ultra-deep pyrosequencing (UDPS) raw data as a surrogate of a real hepatitis C virus viral population, we study through in-silico sampling the statistical properties of these indices under two methods of viral quasispecies sampling, classical cloning followed by Sanger sequencing (CCSS) and next-generation sequencing (NGS) such as UDPS. We propose solutions specific to each of the two sampling methods-CCSS and NGS-to guarantee statistically conforming conclusions as free of bias as possible. josep.gregori@gmail.com Supplementary information: Supplementary data are available at Bioinformatics online. © The Author 2014. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

Application of quality by design concept to develop a dual gradient elution stability-indicating method for cloxacillin forced degradation studies using combined mixture-process variable models.

PubMed

Zhang, Xia; Hu, Changqin

2017-09-08

Penicillins are typical of complex ionic samples which likely contain large number of degradation-related impurities (DRIs) with different polarities and charge properties. It is often a challenge to develop selective and robust high performance liquid chromatography (HPLC) methods for the efficient separation of all DRIs. In this study, an analytical quality by design (AQbD) approach was proposed for stability-indicating method development of cloxacillin. The structures, retention and UV characteristics rules of penicillins and their impurities were summarized and served as useful prior knowledge. Through quality risk assessment and screen design, 3 critical process parameters (CPPs) were defined, including 2 mixture variables (MVs) and 1 process variable (PV). A combined mixture-process variable (MPV) design was conducted to evaluate the 3 CPPs simultaneously and a response surface methodology (RSM) was used to achieve the optimal experiment parameters. A dual gradient elution was performed to change buffer pH, mobile-phase type and strength simultaneously. The design spaces (DSs) was evaluated using Monte Carlo simulation to give their possibility of meeting the specifications of CQAs. A Plackett-Burman design was performed to test the robustness around the working points and to decide the normal operating ranges (NORs). Finally, validation was performed following International Conference on Harmonisation (ICH) guidelines. To our knowledge, this is the first study of using MPV design and dual gradient elution to develop HPLC methods and improve separations for complex ionic samples. Copyright © 2017 Elsevier B.V. All rights reserved.

The use of sequential indicator simulation to characterize geostatistical uncertainty; Yucca Mountain Site Characterization Project

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hansen, K.M.

1992-10-01

Sequential indicator simulation (SIS) is a geostatistical technique designed to aid in the characterization of uncertainty about the structure or behavior of natural systems. This report discusses a simulation experiment designed to study the quality of uncertainty bounds generated using SIS. The results indicate that, while SIS may produce reasonable uncertainty bounds in many situations, factors like the number and location of available sample data, the quality of variogram models produced by the user, and the characteristics of the geologic region to be modeled, can all have substantial effects on the accuracy and precision of estimated confidence limits. It ismore » recommended that users of SIS conduct validation studies for the technique on their particular regions of interest before accepting the output uncertainty bounds.« less

Robust Design of Sheet Metal Forming Process Based on Kriging Metamodel

NASA Astrophysics Data System (ADS)

Xie, Yanmin

2011-08-01

Nowadays, sheet metal forming processes design is not a trivial task due to the complex issues to be taken into account (conflicting design goals, complex shapes forming and so on). Optimization methods have also been widely applied in sheet metal forming. Therefore, proper design methods to reduce time and costs have to be developed mostly based on computer aided procedures. At the same time, the existence of variations during manufacturing processes significantly may influence final product quality, rendering non-robust optimal solutions. In this paper, a small size of design of experiments is conducted to investigate how a stochastic behavior of noise factors affects drawing quality. The finite element software (LS_DYNA) is used to simulate the complex sheet metal stamping processes. The Kriging metamodel is adopted to map the relation between input process parameters and part quality. Robust design models for sheet metal forming process integrate adaptive importance sampling with Kriging model, in order to minimize impact of the variations and achieve reliable process parameters. In the adaptive sample, an improved criterion is used to provide direction in which additional training samples can be added to better the Kriging model. Nonlinear functions as test functions and a square stamping example (NUMISHEET'93) are employed to verify the proposed method. Final results indicate application feasibility of the aforesaid method proposed for multi-response robust design.

Stability and bias of classification rates in biological applications of discriminant analysis

USGS Publications Warehouse

Williams, B.K.; Titus, K.; Hines, J.E.

1990-01-01

We assessed the sampling stability of classification rates in discriminant analysis by using a factorial design with factors for multivariate dimensionality, dispersion structure, configuration of group means, and sample size. A total of 32,400 discriminant analyses were conducted, based on data from simulated populations with appropriate underlying statistical distributions. Simulation results indicated strong bias in correct classification rates when group sample sizes were small and when overlap among groups was high. We also found that stability of the correct classification rates was influenced by these factors, indicating that the number of samples required for a given level of precision increases with the amount of overlap among groups. In a review of 60 published studies, we found that 57% of the articles presented results on classification rates, though few of them mentioned potential biases in their results. Wildlife researchers should choose the total number of samples per group to be at least 2 times the number of variables to be measured when overlap among groups is low. Substantially more samples are required as the overlap among groups increases

Semi-automatic engineering and tailoring of high-efficiency Bragg-reflection waveguide samples for quantum photonic applications

NASA Astrophysics Data System (ADS)

Pressl, B.; Laiho, K.; Chen, H.; Günthner, T.; Schlager, A.; Auchter, S.; Suchomel, H.; Kamp, M.; Höfling, S.; Schneider, C.; Weihs, G.

2018-04-01

Semiconductor alloys of aluminum gallium arsenide (AlGaAs) exhibit strong second-order optical nonlinearities. This makes them prime candidates for the integration of devices for classical nonlinear optical frequency conversion or photon-pair production, for example, through the parametric down-conversion (PDC) process. Within this material system, Bragg-reflection waveguides (BRW) are a promising platform, but the specifics of the fabrication process and the peculiar optical properties of the alloys require careful engineering. Previously, BRW samples have been mostly derived analytically from design equations using a fixed set of aluminum concentrations. This approach limits the variety and flexibility of the device design. Here, we present a comprehensive guide to the design and analysis of advanced BRW samples and show how to automatize these tasks. Then, nonlinear optimization techniques are employed to tailor the BRW epitaxial structure towards a specific design goal. As a demonstration of our approach, we search for the optimal effective nonlinearity and mode overlap which indicate an improved conversion efficiency or PDC pair production rate. However, the methodology itself is much more versatile as any parameter related to the optical properties of the waveguide, for example the phasematching wavelength or modal dispersion, may be incorporated as design goals. Further, we use the developed tools to gain a reliable insight in the fabrication tolerances and challenges of real-world sample imperfections. One such example is the common thickness gradient along the wafer, which strongly influences the photon-pair rate and spectral properties of the PDC process. Detailed models and a better understanding of the optical properties of a realistic BRW structure are not only useful for investigating current samples, but also provide important feedback for the design and fabrication of potential future turn-key devices.

Application of Student Book Based On Integrated Learning Model Of Networked Type With Heart Electrical Activity Theme For Junior High School

NASA Astrophysics Data System (ADS)

Gusnedi, G.; Ratnawulan, R.; Triana, L.

2018-04-01

The purpose of this study is to determine the effect of the use of Integrated Science IPA books Using Networked Learning Model of knowledge competence through improved learning outcomes obtained. The experimental design used is one group pre test post test design to know the results before and after being treated. The number of samples used is one class that is divided into two categories of initial ability to see the improvement of knowledge competence. The sample used was taken from the students of grade VIII SMPN 2 Sawahlunto, Indonesia. The results of this study indicate that most students have increased knowledge competence.

Ergonomic Work Station Design to Improve Workload Quality and Productivity of the Craffsmen

NASA Astrophysics Data System (ADS)

Widana, IK; Wayan Sumetri, Ni; Ketut Sutapa, I.

2018-01-01

This study is a research on ergonomics field, especially for ergonomics work station. This research begins with direct observation on the work process of carving craft. In addition to the aspect of occupational health, the stages of the process are also subject matter in the effort to solve the research problem. In accordance with the master plan of research of Bali State Polytechnic, problem solving will be focused on human aspect and utilization of appropriate technology, so that will get the work process ENASEP (effective, convenient, safe, healthy, efficient and productive) Technical easy to work, economical, ergonomic, energy saving, environmentally friendly and in accordance with the trend of the era. The method to be used in this research is experimental with the same subject design. Involves 9 samples who perform activities on conditions before and after treatment. Data on environmental conditions were analyzed by Mann-Whitney test. Data on work productivity and workload were tested with two pair sample t-test at a significance level of 5%. The results showed that by utilizing ergonomic work stations, occupational health indicators such as workload showed better signs, indicated by decreased the workload. In addition to occupational health, productivity indicators also increased significantly.

Measurement of Passive Uptake Rates for Volatile Organic Compounds on Commercial Thermal Desorption Tubes and the Effect of Ozone on Sampling

DOE Office of Scientific and Technical Information (OSTI.GOV)

Maddalena, Randy; Parra, Amanda; Russell, Marion

Diffusive or passive sampling methods using commercially filled axial-sampling thermal desorption tubes are widely used for measuring volatile organic compounds (VOCs) in air. The passive sampling method provides a robust, cost effective way to measure air quality with time-averaged concentrations spanning up to a week or more. Sampling rates for VOCs can be calculated using tube geometry and Fick’s Law for ideal diffusion behavior or measured experimentally. There is evidence that uptake rates deviate from ideal and may not be constant over time. Therefore, experimentally measured sampling rates are preferred. In this project, a calibration chamber with a continuous stirredmore » tank reactor design and constant VOC source was combined with active sampling to generate a controlled dynamic calibration environment for passive samplers. The chamber air was augmented with a continuous source of 45 VOCs ranging from pentane to diethyl phthalate representing a variety of chemical classes and physiochemical properties. Both passive and active samples were collected on commercially filled Tenax TA thermal desorption tubes over an 11-day period and used to calculate passive sampling rates. A second experiment was designed to determine the impact of ozone on passive sampling by using the calibration chamber to passively load five terpenes on a set of Tenax tubes and then exposing the tubes to different ozone environments with and without ozone scrubbers attached to the tube inlet. During the sampling rate experiment, the measured diffusive uptake was constant for up to seven days for most of the VOCs tested but deviated from linearity for some of the more volatile compounds between seven and eleven days. In the ozone experiment, both exposed and unexposed tubes showed a similar decline in terpene mass over time indicating back diffusion when uncapped tubes were transferred to a clean environment but there was no indication of significant loss by ozone reaction.« less

Spatial patterning in PM2.5 constituents under an inversion-focused sampling design across an urban area of complex terrain

PubMed Central

Tunno, Brett J; Dalton, Rebecca; Michanowicz, Drew R; Shmool, Jessie L C; Kinnee, Ellen; Tripathy, Sheila; Cambal, Leah; Clougherty, Jane E

2016-01-01

Health effects of fine particulate matter (PM2.5) vary by chemical composition, and composition can help to identify key PM2.5 sources across urban areas. Further, this intra-urban spatial variation in concentrations and composition may vary with meteorological conditions (e.g., mixing height). Accordingly, we hypothesized that spatial sampling during atmospheric inversions would help to better identify localized source effects, and reveal more distinct spatial patterns in key constituents. We designed a 2-year monitoring campaign to capture fine-scale intra-urban variability in PM2.5 composition across Pittsburgh, PA, and compared both spatial patterns and source effects during “frequent inversion” hours vs 24-h weeklong averages. Using spatially distributed programmable monitors, and a geographic information systems (GIS)-based design, we collected PM2.5 samples across 37 sampling locations per year to capture variation in local pollution sources (e.g., proximity to industry, traffic density) and terrain (e.g., elevation). We used inductively coupled plasma mass spectrometry (ICP-MS) to determine elemental composition, and unconstrained factor analysis to identify source suites by sampling scheme and season. We examined spatial patterning in source factors using land use regression (LUR), wherein GIS-based source indicators served to corroborate factor interpretations. Under both summer sampling regimes, and for winter inversion-focused sampling, we identified six source factors, characterized by tracers associated with brake and tire wear, steel-making, soil and road dust, coal, diesel exhaust, and vehicular emissions. For winter 24-h samples, four factors suggested traffic/fuel oil, traffic emissions, coal/industry, and steel-making sources. In LURs, as hypothesized, GIS-based source terms better explained spatial variability in inversion-focused samples, including a greater contribution from roadway, steel, and coal-related sources. Factor analysis produced source-related constituent suites under both sampling designs, though factors were more distinct under inversion-focused sampling. PMID:26507005

[Synthetic duration curve method for the design of the lowest navigable water level with inconsistent characters in dry seasons].

PubMed

Zhao, Jiang Yan; Xie, Ping; Sang, Yan Fang; Xui, Qiang Qiang; Wu, Zi Yi

2018-04-01

Under the influence of both global climate change and frequent human activities, the variability of second-moment in hydrological time series become obvious, indicating changes in the consistency of hydrological data samples. Therefore, the traditional hydrological series analysis methods, which only consider the variability of mean values, are not suitable for handling all hydrological non-consistency problems. Traditional synthetic duration curve methods for the design of the lowest navigable water level, based on the consistency of samples, would cause more risks to navigation, especially under low water level in dry seasons. Here, we detected both mean variation and variance variation using the hydrological variation diagnosis system. Furthermore, combing the principle of decomposition and composition of time series, we proposed the synthetic duration curve method for designing the lowest navigable water level with inconsistent characters in dry seasons. With the Yunjinghong Station in the Lancang River Basin as an example, we analyzed its designed water levels in the present, the distant past and the recent past, as well as the differences among three situations (i.e., considering second moment variation, only considering mean variation, not considering any variation). Results showed that variability of the second moment changed the trend of designed water levels alteration in the Yunjinghong Station. When considering the first two moments or just considering the mean variation, the difference ofdesigned water levels was as bigger as -1.11 m. When considering the first two moments or not, the difference of designed water levels was as bigger as -1.01 m. Our results indicated the strong effects of variance variation on the designed water levels, and highlighted the importance of the second moment variation analysis for the channel planning and design.

Assessment of sampling stability in ecological applications of discriminant analysis

USGS Publications Warehouse

Williams, B.K.; Titus, K.

1988-01-01

A simulation study was undertaken to assess the sampling stability of the variable loadings in linear discriminant function analysis. A factorial design was used for the factors of multivariate dimensionality, dispersion structure, configuration of group means, and sample size. A total of 32,400 discriminant analyses were conducted, based on data from simulated populations with appropriate underlying statistical distributions. A review of 60 published studies and 142 individual analyses indicated that sample sizes in ecological studies often have met that requirement. However, individual group sample sizes frequently were very unequal, and checks of assumptions usually were not reported. The authors recommend that ecologists obtain group sample sizes that are at least three times as large as the number of variables measured.

Buffer AVL Alone Does Not Inactivate Ebola Virus in a Representative Clinical Sample Type.

PubMed

Smither, Sophie J; Weller, Simon A; Phelps, Amanda; Eastaugh, Lin; Ngugi, Sarah; O'Brien, Lyn M; Steward, Jackie; Lonsdale, Steve G; Lever, Mark S

2015-10-01

Rapid inactivation of Ebola virus (EBOV) is crucial for high-throughput testing of clinical samples in low-resource, outbreak scenarios. The EBOV inactivation efficacy of Buffer AVL (Qiagen) was tested against marmoset serum (EBOV concentration of 1 × 10(8) 50% tissue culture infective dose per milliliter [TCID50 · ml(-1)]) and murine blood (EBOV concentration of 1 × 10(7) TCID50 · ml(-1)) at 4:1 vol/vol buffer/sample ratios. Posttreatment cell culture and enzyme-linked immunosorbent assay (ELISA) analysis indicated that treatment with Buffer AVL did not inactivate EBOV in 67% of samples, indicating that Buffer AVL, which is designed for RNA extraction and not virus inactivation, cannot be guaranteed to inactivate EBOV in diagnostic samples. Murine blood samples treated with ethanol (4:1 [vol/vol] ethanol/sample) or heat (60°C for 15 min) also showed no viral inactivation in 67% or 100% of samples, respectively. However, combined Buffer AVL and ethanol or Buffer AVL and heat treatments showed total viral inactivation in 100% of samples tested. The Buffer AVL plus ethanol and Buffer AVL plus heat treatments were also shown not to affect the extraction of PCR quality RNA from EBOV-spiked murine blood samples. © Crown copyright 2015.

Antecedents of Emotional Intelligence: An Empirical Study

ERIC Educational Resources Information Center

Barbuto, John E., Jr.; Story, Joana S.

2010-01-01

This study examined the relationships between emotional intelligence, locus of control, and mental boundaries. Three hundred and eighty-two county employees were sampled using a cross-sectional survey design. The results indicated internal locus of control and thin mental boundaries are positively related to emotional intelligence. A hierarchical…

INDICATORS OF ECOLOGICAL STRESS AND THEIR EXTENT IN THE POPULATION OF NORTHEASTERN LAKES

EPA Science Inventory

The Environmental Monitoring and Assessment Program (EMAP) surveyed 345 northeastern lakes, during 1991-1996, in the first regional-scale survey to use a probability-based sampling design to collect biological assemblage data along with a broad range of physical and chemical indi...

Multi-scale ecosystem monitoring: an application of scaling data to answer multiple ecological questions

USDA-ARS?s Scientific Manuscript database

Background/Question/Methods Standardized monitoring data collection efforts using a probabilistic sample design, such as in the Bureau of Land Management’s (BLM) Assessment, Inventory, and Monitoring (AIM) Strategy, provide a core suite of ecological indicators, maximize data collection efficiency,...

Multiscale ecosystem monitoring: an application of scaling data to answer multiple ecological questions

USDA-ARS?s Scientific Manuscript database

Standardized monitoring data collection efforts using a probabilistic sample design, such as in the Bureau of Land Management’s (BLM) Assessment, Inventory, and Monitoring (AIM) Strategy, provide a core suite of ecological indicators, maximize data collection efficiency, and promote reuse of monitor...

Measuring Gifted Adolescents' Implicit Theories of Creativity

ERIC Educational Resources Information Center

Wickes, Katherine N. Saunders; Ward, Thomas B.

2006-01-01

This paper examines the structure of implicit theories of creativity in a sample of gifted adolescents and describes the development and use of the Creative Self Checklist and the Creative Individual Checklist, adjective checklists designed to assess endorsement of creativity-related personality and behavioral attributes. Findings indicate that…

THE ECOLOGICAL CONDITION OF VERACRUZ, MEXICO ESTUARIES

EPA Science Inventory

During June and July, 2002, forty-seven stations were sampled within estuaries along the gulf coast of the state of Veracruz, MX, using a probabilistic survey design and a common set of response indicators. The objective of the study was to collect information to assess the condi...

[Application of Fourier amplitude sensitivity test in Chinese healthy volunteer population pharmacokinetic model of tacrolimus].

PubMed

Guan, Zheng; Zhang, Guan-min; Ma, Ping; Liu, Li-hong; Zhou, Tian-yan; Lu, Wei

2010-07-01

In this study, we evaluated the influence of different variance from each of the parameters on the output of tacrolimus population pharmacokinetic (PopPK) model in Chinese healthy volunteers, using Fourier amplitude sensitivity test (FAST). Besides, we estimated the index of sensitivity within whole course of blood sampling, designed different sampling times, and evaluated the quality of parameters' and the efficiency of prediction. It was observed that besides CL1/F, the index of sensitivity for all of the other four parameters (V1/F, V2/F, CL2/F and k(a)) in tacrolimus PopPK model showed relatively high level and changed fast with the time passing. With the increase of the variance of k(a), its indices of sensitivity increased obviously, associated with significant decrease in sensitivity index for the other parameters, and obvious change in peak time as well. According to the simulation of NONMEM and the comparison among different fitting results, we found that the sampling time points designed according to FAST surpassed the other time points. It suggests that FAST can access the sensitivities of model parameters effectively, and assist the design of clinical sampling times and the construction of PopPK model.

Finite element design for the HPHT synthesis of diamond

NASA Astrophysics Data System (ADS)

Li, Rui; Ding, Mingming; Shi, Tongfei

2018-06-01

The finite element method is used to simulate the steady-state temperature field in diamond synthesis cell. The 2D and 3D models of the China-type cubic press with large deformation of the synthesis cell was established successfully, which has been verified by situ measurements of synthesis cell. The assembly design, component design and process design for the HPHT synthesis of diamond based on the finite element simulation were presented one by one. The temperature field in a high-pressure synthetic cavity for diamond production is optimized by adjusting the cavity assembly. A series of analysis about the influence of the pressure media parameters on the temperature field are examined through adjusting the model parameters. Furthermore, the formation mechanism of wasteland was studied in detail. It indicates that the wasteland is inevitably exists in the synthesis sample, the distribution of growth region of the diamond with hex-octahedral is move to the center of the synthesis sample from near the heater as the power increasing, and the growth conditions of high quality diamond is locating at the center of the synthesis sample. These works can offer suggestion and advice to the development and optimization of a diamond production process.

A Framework for Long-term Ecological Monitoring in Olympic National Park: Prototype for the Coniferous Forest Biome

USGS Publications Warehouse

Jenkins, Kurt; Woodward, Andrea; Schreiner, Ed

2003-01-01

This report is the result of a five-year collaboration between scientists of the U.S. Geological Survey Forest and Rangeland Ecosystem Science Center, Olympic Field Station, and the natural resources staff of Olympic National Park to develop a comprehensive strategy for monitoring natural resources of Olympic National Park. Olympic National Park is the National Park Serviceʼs prototype monitoring park, representing parks in the coniferous forest biome. Under the umbrella of the National Park Serviceʼs prototype parks program, U.S. Geological Survey and Olympic National Park staffs are obligated to:develop strategies and designs for monitoring the long-term health and integrity of national park ecosystems with a significant coniferous forest component.design exportable monitoring protocols that can be used by other parks within the coniferous forest biome (i.e., parks having similar environments), andcreate a demonstration area and ʻcenter of excellenceʼ for assisting other parks in developing ecological monitoring programs.Olympic National Park is part of the North Coast and Cascades Network, a network of seven Pacific Northwestern park units created recently by the National Park Serviceʼs Inventory and Monitoring Program to extend the monitoring of ʻvital signsʼ of park health to all National Park Service units. It is our intent and hope that the monitoring strategies and conceptual models described here will meet the overall purpose of the prototype parks monitoring program in proving useful not only to Olympic National Park, but also to parks within the North Coast and Cascades Network and elsewhere. Part I contains the conceptual design and sampling framework for the prototype long-term monitoring program in Olympic National Park. In this section, we explore key elements of monitoring design that help to ensure the spatial, ecological, and temporal integration of monitoring program elements and discuss approaches used to design an ecosystem-based monitoring program. Basic monitoring components include ecosystem drivers, (e.g., climate, atmospheric inputs, human pressures), indicators of ecosystem integrity (e.g., biogeochemical indicators), known threats (e.g., impacts of introduced mountain goats), and focal or ʻkeyʼ species (e.g., rare or listed species, Roosevelt elk). Monitoring system drivers and key indicators of ecosystem integrity provide the long-term baseline needed to judge what constitutes ʻunnaturalʼ variation in park resources and provide the earliest possible warning of unacceptable change. Monitoring effects of known threats and the status of focal species will provide information useful to park managers for dealing with current park issues. In Part I we describe the process of identifying potential indicators of ecological condition and present conceptual models of park ecosystems. In addition we report results from several workshops held in conjunction with Olympic National Park aimed at identifying potential indicators of change in the parkʼs ecosystem. First, we describe the responses of Olympic National Park staff to the generic question, “What is the most important resource to monitor in Olympic National Park and why?” followed by the responses from resource and land managers from areas adjoining the park. We also catalogue the responses of various expert groups that we asked to help identify the most appropriate system drivers and indicators of change in the Olympic National Park ecosystems. Results of the workshops provided the justification for selecting basic indicators of ecosystem integrity, effects of current threats to park resources, and focal resources of parks to detect both the currently evident and unforeseeable changes in park resources. We conclude Part I by exploring several generic statistical issues relevant to monitoring natural resources in Olympic National Park. Specifically we discuss trade-offs associated with sampling extensively versus sampling intensively in smaller geographic regions and describe a conceptual framework to guide development of a generic sampling frame for monitoring. We recommend partitioning Olympic National Park into three zones of decreasing accessibility to maximize monitoring efficiency. We present examples of how the generic sampling frame could be used to help ensure spatial integration of individual monitoring projects. Part II of the report is a record of the potential monitoring questions and indicators identified to date in our workshops. The presentation is organized according to the major system drivers, components, and processes identified in the intermediate-level working model of the Olympic National Park ecosystem. For each component of the park system, we develop the need and justification for monitoring, articulate park management issues, and describe key resources and ecosystem functions. We also present a pictorial conceptual model of each ecological subsystem, identify monitoring questions, and list potential indicators for each monitoring question. We conclude each section by identifying linkages of indicators to other ecological subsystems in our general ecosystem model, spatial and temporal contexts for monitoring (where and how often to monitor), and research and development needs. Part II represents the most current detailed listing of potential indicators—the material for subsequent discussions of monitoring priorities and selection of indicators for protocol development.Collectively, the sections of this report contain a comprehensive list of the important monitoring questions and potential indicators as well as recommendations for designing an integrated monitoring program. In Part I, Chapter 6 we provide recommendations on how to proceed with the important next steps in the design process: establishing priorities among the many possible monitoring questions and indicators, and beginning to research and design effective long-term monitoring protocols.

Endocrine active chemicals, pharmaceuticals, and other chemicals of concern in surface water, wastewater-treatment plant effluent, and bed sediment, and biological characteristics in selected streams, Minnesota-design, methods, and data, 2009

USGS Publications Warehouse

Lee, Kathy E.; Langer, Susan K.; Barber, Larry B.; Writer, Jeff H.; Ferrey, Mark L.; Schoenfuss, Heiko L.; Furlong, Edward T.; Foreman, William T.; Gray, James L.; ReVello, Rhiannon C.; Martinovic, Dalma; Woodruff, Olivia R.; Keefe, Steffanie H.; Brown, Greg K.; Taylor, Howard E.; Ferrer, Imma; Thurman, E. Michael

2011-01-01

This report presents the study design, environmental data, and quality-assurance data for an integrated chemical and biological study of selected streams or lakes that receive wastewater-treatment plant effluent in Minnesota. This study was a cooperative effort of the U.S. Geological Survey, the Minnesota Pollution Control Agency, St. Cloud State University, the University of St. Thomas, and the University of Colorado. The objective of the study was to identify distribution patterns of endocrine active chemicals, pharmaceuticals, and other organic and inorganic chemicals of concern indicative of wastewater effluent, and to identify biological characteristics of estrogenicity and fish responses in the same streams. The U.S. Geological Survey collected and analyzed water, bed-sediment, and quality-assurance samples, and measured or recorded streamflow once at each sampling location from September through November 2009. Sampling locations included surface water and wastewater-treatment plant effluent. Twenty-five wastewater-treatment plants were selected to include continuous flow and periodic release facilities with differing processing steps (activated sludge or trickling filters) and plant design flows ranging from 0.002 to 10.9 cubic meters per second (0.04 to 251 million gallons per day) throughout Minnesota in varying land-use settings. Water samples were collected from the treated effluent of the 25 wastewater-treatment plants and at one point upstream from and one point downstream from wastewater-treatment plant effluent discharges. Bed-sediment samples also were collected at each of the stream or lake locations. Water samples were analyzed for major ions, nutrients, trace elements, pharmaceuticals, phytoestrogens and pharmaceuticals, alkylphenols and other neutral organic chemicals, carboxylic acids, and steroidal hormones. A subset (25 samples) of the bed-sediment samples were analyzed for carbon, wastewater-indicator chemicals, and steroidal hormones; the remaining samples were archived. Biological characteristics were determined by using an in-vitro bioassay to determine total estrogenicity in water samples and a caged fish study to determine characteristics of fish from experiments that exposed fish to wastewater effluent in 2009. St. Cloud State University deployed and processed caged fathead minnows at 13 stream sites during September 2009 for the caged fish study. Measured fish data included length, weight, body condition factor, and vitellogenin concentrations.

Evaluating multi-level models to test occupancy state responses of Plethodontid salamanders

USGS Publications Warehouse

Kroll, Andrew J.; Garcia, Tiffany S.; Jones, Jay E.; Dugger, Catherine; Murden, Blake; Johnson, Josh; Peerman, Summer; Brintz, Ben; Rochelle, Michael

2015-01-01

Plethodontid salamanders are diverse and widely distributed taxa and play critical roles in ecosystem processes. Due to salamander use of structurally complex habitats, and because only a portion of a population is available for sampling, evaluation of sampling designs and estimators is critical to provide strong inference about Plethodontid ecology and responses to conservation and management activities. We conducted a simulation study to evaluate the effectiveness of multi-scale and hierarchical single-scale occupancy models in the context of a Before-After Control-Impact (BACI) experimental design with multiple levels of sampling. Also, we fit the hierarchical single-scale model to empirical data collected for Oregon slender and Ensatina salamanders across two years on 66 forest stands in the Cascade Range, Oregon, USA. All models were fit within a Bayesian framework. Estimator precision in both models improved with increasing numbers of primary and secondary sampling units, underscoring the potential gains accrued when adding secondary sampling units. Both models showed evidence of estimator bias at low detection probabilities and low sample sizes; this problem was particularly acute for the multi-scale model. Our results suggested that sufficient sample sizes at both the primary and secondary sampling levels could ameliorate this issue. Empirical data indicated Oregon slender salamander occupancy was associated strongly with the amount of coarse woody debris (posterior mean = 0.74; SD = 0.24); Ensatina occupancy was not associated with amount of coarse woody debris (posterior mean = -0.01; SD = 0.29). Our simulation results indicate that either model is suitable for use in an experimental study of Plethodontid salamanders provided that sample sizes are sufficiently large. However, hierarchical single-scale and multi-scale models describe different processes and estimate different parameters. As a result, we recommend careful consideration of study questions and objectives prior to sampling data and fitting models.

Adaptation of G-TAG Software for Validating Touch-and-Go Comet Surface Sampling Design Methodology

NASA Technical Reports Server (NTRS)

Mandic, Milan; Acikmese, Behcet; Blackmore, Lars

2011-01-01

The G-TAG software tool was developed under the R&TD on Integrated Autonomous Guidance, Navigation, and Control for Comet Sample Return, and represents a novel, multi-body dynamics simulation software tool for studying TAG sampling. The G-TAG multi-body simulation tool provides a simulation environment in which a Touch-and-Go (TAG) sampling event can be extensively tested. TAG sampling requires the spacecraft to descend to the surface, contact the surface with a sampling collection device, and then to ascend to a safe altitude. The TAG event lasts only a few seconds but is mission-critical with potentially high risk. Consequently, there is a need for the TAG event to be well characterized and studied by simulation and analysis in order for the proposal teams to converge on a reliable spacecraft design. This adaptation of the G-TAG tool was developed to support the Comet Odyssey proposal effort, and is specifically focused to address comet sample return missions. In this application, the spacecraft descends to and samples from the surface of a comet. Performance of the spacecraft during TAG is assessed based on survivability and sample collection performance. For the adaptation of the G-TAG simulation tool to comet scenarios, models are developed that accurately describe the properties of the spacecraft, approach trajectories, and descent velocities, as well as the models of the external forces and torques acting on the spacecraft. The adapted models of the spacecraft, descent profiles, and external sampling forces/torques were more sophisticated and customized for comets than those available in the basic G-TAG simulation tool. Scenarios implemented include the study of variations in requirements, spacecraft design (size, locations, etc. of the spacecraft components), and the environment (surface properties, slope, disturbances, etc.). The simulations, along with their visual representations using G-View, contributed to the Comet Odyssey New Frontiers proposal effort by indicating problems and/or benefits of different approaches and designs.

Automated screening method for determining optimum preservative systems for personal and home care products.

PubMed

Lenczewski, M E; Kananen, L L

1998-01-01

A procedure was designed to determine the minimum preservative level (MPL) for personal and home care products. A highly preserved sample and an unpreserved sample were combined at different concentrations within a 96-well microtiter plate by using an autodilutor. A unique tip design made it possible to accurately deliver viscous test materials that cannot be dispensed using vacuum- or fluid-filled systems. After inoculation, the sample was evaluated at a specified time interval for the presence of surviving bacteria, yeast, and mold. The lowest concentration of preservative with no microbial growth is the recommended level of preservative for the product. Because sample turbidity may interfere with determination of the endpoint, a colorimetric endpoint was used to indicate growth of microorganisms and to differentiate product from growth. The predicted levels were tested with a modified Cosmetic, Toiletry, and Fragrance Association method. The method successfully predicted effective preservative levels in many personal and home care products with a broad range of viscosities.

Six degree of freedom fine motion positioning stage based on magnetic levitation

NASA Technical Reports Server (NTRS)

Arling, R. W.; Kohler, S. M.

1994-01-01

The design of a magnetically suspended six degree of freedom positioning system capable of nanometer positioning is presented. The sample holder is controlled in six degrees of freedom (DOF) over 300 micrometers of travel in the X, Y, and Z directions. A design and control summary and test results indicating stability and power dissipation are included in the paper. The system is vacuum compatible, uses commercially available materials, and requires minimal assembly and setup.

Can we estimate molluscan abundance and biomass on the continental shelf?

NASA Astrophysics Data System (ADS)

Powell, Eric N.; Mann, Roger; Ashton-Alcox, Kathryn A.; Kuykendall, Kelsey M.; Chase Long, M.

2017-11-01

Few empirical studies have focused on the effect of sample density on the estimate of abundance of the dominant carbonate-producing fauna of the continental shelf. Here, we present such a study and consider the implications of suboptimal sampling design on estimates of abundance and size-frequency distribution. We focus on a principal carbonate producer of the U.S. Atlantic continental shelf, the Atlantic surfclam, Spisula solidissima. To evaluate the degree to which the results are typical, we analyze a dataset for the principal carbonate producer of Mid-Atlantic estuaries, the Eastern oyster Crassostrea virginica, obtained from Delaware Bay. These two species occupy different habitats and display different lifestyles, yet demonstrate similar challenges to survey design and similar trends with sampling density. The median of a series of simulated survey mean abundances, the central tendency obtained over a large number of surveys of the same area, always underestimated true abundance at low sample densities. More dramatic were the trends in the probability of a biased outcome. As sample density declined, the probability of a survey availability event, defined as a survey yielding indices >125% or <75% of the true population abundance, increased and that increase was disproportionately biased towards underestimates. For these cases where a single sample accessed about 0.001-0.004% of the domain, 8-15 random samples were required to reduce the probability of a survey availability event below 40%. The problem of differential bias, in which the probabilities of a biased-high and a biased-low survey index were distinctly unequal, was resolved with fewer samples than the problem of overall bias. These trends suggest that the influence of sampling density on survey design comes with a series of incremental challenges. At woefully inadequate sampling density, the probability of a biased-low survey index will substantially exceed the probability of a biased-high index. The survey time series on the average will return an estimate of the stock that underestimates true stock abundance. If sampling intensity is increased, the frequency of biased indices balances between high and low values. Incrementing sample number from this point steadily reduces the likelihood of a biased survey; however, the number of samples necessary to drive the probability of survey availability events to a preferred level of infrequency may be daunting. Moreover, certain size classes will be disproportionately susceptible to such events and the impact on size frequency will be species specific, depending on the relative dispersion of the size classes.

Early Results and Spaceflight Implications of the SWAB Flight Experiment

NASA Technical Reports Server (NTRS)

Ott, C. Mark; Pierson, Duane L.

2007-01-01

Microbial monitoring of spacecraft environments provides key information in the assessment of infectious disease risk to the crew. Monitoring aboard the Mir space station and International Space Station (ISS) has provided a tremendous informational baseline to aid in determining the types and concentrations of microorganisms during a mission. Still, current microbial monitoring hardware utilizes culture-based methodology which may not detect many medically significant organisms, such as Legionella pneumophila. We hypothesize that evaluation of the ISS environment using non-culture-based technologies would reveal microorganisms not previously reported in spacecraft, allowing for a more complete health assessment. To achieve this goal, a spaceflight experiment, operationally designated as SWAB, was designed to evaluate the DNA from environmental samples collected from ISS and vehicles destined for ISS. Results from initial samples indicate that the sample collection and return procedures were successful. Analysis of these samples using denaturing gradient gel electrophoresis and targeted PCR primers for fungal contaminants is underway. The current results of SWAB and their implication for in-flight molecular analysis of environmental samples will be discussed.

Pore water sampling in acid sulfate soils: a new peeper method.

PubMed

Johnston, Scott G; Burton, Edward D; Keene, Annabelle F; Bush, Richard T; Sullivan, Leigh A; Isaacson, Lloyd

2009-01-01

This study describes the design, deployment, and application of a modified equilibration dialysis device (peeper) optimized for sampling pore waters in acid sulfate soils (ASS). The modified design overcomes the limitations of traditional-style peepers, when sampling firm ASS materials over relatively large depth intervals. The new peeper device uses removable, individual cells of 25 mL volume housed in a 1.5 m long rigid, high-density polyethylene rod. The rigid housing structure allows the device to be inserted directly into relatively firm soils without requiring a supporting frame. The use of removable cells eliminates the need for a large glove-box after peeper retrieval, thus simplifying physical handling. Removable cells are easily maintained in an inert atmosphere during sample processing and the 25-mL sample volume is sufficient for undertaking multiple analyses. A field evaluation of equilibration times indicates that 32 to 38 d of deployment was necessary. Overall, the modified method is simple and effective and well suited to acquisition and processing of redox-sensitive pore water profiles>1 m deep in acid sulfate soil or any other firm wetland soils.

An Exploration of Supervisory and Therapeutic Relationships and Client Outcomes

ERIC Educational Resources Information Center

Bell, Hope; Hagedorn, W. Bryce; Robinson, E. H. Mike

2016-01-01

The authors explored the connection between the facilitative conditions present within the supervisory relationship, the therapeutic relationship, and client outcomes. A correlational research design was used with a sample of 55 counselors-in-training and 88 clients. Results indicated a significant positive relationship between the therapeutic…

Retention Issues: A Study of Alabama Special Education Teachers

ERIC Educational Resources Information Center

Plash, Shawn; Piotrowski, Chris

2006-01-01

This study investigated issues that impact attrition, migration and retention of special education teachers in Alabama. The sample comprised 70 teachers designated as "highly-qualified" who responded to a job satisfaction instrument, with a focus on retention issues, developed by Levine (2001). The results indicated that the major…

Neuropsychological and Early Maturational Correlates of Intelligence.

ERIC Educational Resources Information Center

Denno, Deborah J.

A study designed to examine biological, sociological, and early maturational correlates of intelligence collected data prospectively, from birth to 15 years of age, on a sample of 987 black children. Multiple indicators of eight independent and three dependent variables were tested in a structural equation model. Altogether, clear sex differences…

Bacteriological quality evaluation of seawater and oysters from the Jaranman-Saryangdo area, a designated shellfish growing area in Korea: Impact of inland pollution sources.

PubMed

Mok, Jong Soo; Lee, Ka Jeong; Kim, Poong Ho; Lee, Tae Seek; Lee, Hee Jung; Jung, Yeoun Joong; Kim, Ji Hoe

2016-07-15

From 2011 to 2013, we conducted a full sanitary survey of pollution sources in proximity to a designated shellfish growing area in Korea, and their impact on the sea area therein. From this area, 836 seawater samples and 93 oyster samples were examined to evaluate their bacteriological quality. There were 483 potential pollution sources in the drainage area of the Jaranman-Saryangdo area, including 38 sources discharging water. It demonstrates that while many pollution sources have been identified, no significant impact occurred within the designated shellfish growing area. Variations in fecal coliform (FC) levels in seawater were closely related to rainfall. The FC levels of seawater and oysters from the designated area met the regulation limits set by various countries. Our study indicates that the oysters produced in this area are apparently safe for raw consumption based on their bacterial quality. Copyright © 2016 Elsevier Ltd. All rights reserved.

Color in graphic design: an analysis of meaning and trends

NASA Astrophysics Data System (ADS)

Martinson, Barbara; Waldron, Carol C.

2002-06-01

Graphic design is visual communication through the selection, arrangement, and presentation of words and images, most often for the printed page which offer the designer almost limitless options for color use. The objective of this project is to identify patterns of color use. Ethnographic content analysis was used to document color use in annual reports represented in two publications, Print and Communication Arts, 1993-2000. The analysis focuses on the selection, combination, and contrast of hues; and their use with achromatic values. An analysis of the entire sample indicates that one-third of the annual reports used a palette that include black, white, and a hue from quadrant one (red to yellow). Nearly one-fifth of the designs used black, white, and colors from quadrants one and three (cyan to blue). The large samples for Technology, Health Sciences, Financial, and Civic organizations follow the first pattern. Food Service, Business products and services, and Transportation industries favor the second pattern.

Single-Case Experimental Designs: A Systematic Review of Published Research and Current Standards

PubMed Central

Smith, Justin D.

2013-01-01

This article systematically reviews the research design and methodological characteristics of single-case experimental design (SCED) research published in peer-reviewed journals between 2000 and 2010. SCEDs provide researchers with a flexible and viable alternative to group designs with large sample sizes. However, methodological challenges have precluded widespread implementation and acceptance of the SCED as a viable complementary methodology to the predominant group design. This article includes a description of the research design, measurement, and analysis domains distinctive to the SCED; a discussion of the results within the framework of contemporary standards and guidelines in the field; and a presentation of updated benchmarks for key characteristics (e.g., baseline sampling, method of analysis), and overall, it provides researchers and reviewers with a resource for conducting and evaluating SCED research. The results of the systematic review of 409 studies suggest that recently published SCED research is largely in accordance with contemporary criteria for experimental quality. Analytic method emerged as an area of discord. Comparison of the findings of this review with historical estimates of the use of statistical analysis indicates an upward trend, but visual analysis remains the most common analytic method and also garners the most support amongst those entities providing SCED standards. Although consensus exists along key dimensions of single-case research design and researchers appear to be practicing within these parameters, there remains a need for further evaluation of assessment and sampling techniques and data analytic methods. PMID:22845874

Data Validation Package May 2016 Groundwater Sampling at the Sherwood, Washington, Disposal Site August 2016

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kreie, Ken; Traub, David

The 2001 Long-Term Surveillance Plan (LTSP) for the US. Department of Energy Sherwood Project (UMI'RCA Title II) Reclamation Cell, Wellpinit, Washington, does not require groundwater compliance monitoring at the Sherwood site. However, the LTSP stipulates limited groundwater monitoring for chloride and sulfate (designated indicator parameters) and total dissolved solids (TDS) as a best management practice. Samples were collected from the background well, MW-2B, and the two downgradient wells, MW-4 and MW-10, in accordance with the LTSP. Sampling and analyses were conducted as specified in the Sampling and Analysis Plan for US. Department of Energy Office of Legacy Management Sites (LMS/PRO/S04351,more » continually updated). Water levels were measured in all wells prior to sampling and in four piezometers completed in the tailings dam. Time-concentration graphs included in this report indicate that the chloride, sulfate, and TDS concentrations are consistent with historical measurements. The concentrations of chloride and sulfate are well below the State of Washington water quality criteria value of 250 milligrams per liter (mg/L) for both parameters.« less

Detection of Helicobacter pylori and fecal indicator bacteria in five North American rivers.

USGS Publications Warehouse

Voytek, M.A.; Ashen, J.B.; Fogarty, L.R.; Kirshtein, J.D.; Landa, E.R.

2005-01-01

This study examines the use of fecal indicator bacteria (FIB) as a predictor of the presence of Helicobacter spp. A combination of standard culture and molecular techniques were used to detect and quantify FIB, Helicobacter spp. and H. pylori from five North American rivers of different size and with different land use characteristics. Primers designed to amplify genes specific to Helicobacter spp. and H. pylori were evaluated for their efficacy in detection and quantification in environmental samples. Helicobacter spp. were detected in 18/33 (55%) of river samples. H. pylori was detected in 11/33 (33%) of river samples. FIB were found in 32/33 (96%) of river samples. When FIB abundance exceeded USEPA water quality standards for single samples, Helicobacter or H. pylori were detected in 7/15 (47%) cases. No numerical correlation was found between the presence of FIB and either Helicobacter spp. or H. pylori. This suggests that the presence of FIB will be of limited use for detection of Helicobacter spp. or H. pylori by public health agencies.

Recent developments in high altitude aircraft sampling - Mount St. Helens and stratospheric trace gases

NASA Astrophysics Data System (ADS)

Leifer, R.; Sommers, K. G.; Guggenheim, S. F.; Fisenne, I.

1981-02-01

An ultra-clean, low volume gas sampling system (CLASS), flown aboard a high altitude aircraft (WB-57F), and providing information on stratospheric trace gases is presented. Attention is given to the instrument design and the electronic control design. Since remote operation is mandatory on the WB-57F, a servo pressure transducer, electrical pressure switch for automatic shutdown, and a mechanical safety relief valve were installed on the sampling manifold, indicated on the CLASS flow chart. The electronic control system consists of hermetically sealed solid state timers, relays, and a stepping switch, for controlling the compressor pump and solenoid valves. In designing the automatic control system, vibration, shock, acceleration, extreme low temperature, and aircraft safety were important considerations. CLASS was tested on three separate occasions, and tables of analytical data from these flights are presented. Readiness capability was demonstrated when the Mount St. Helens eruption plume of May 18, 1980, was intercepted, and it was concluded that no large injection of Rn-222 entered the stratosphere or troposphere from the eruption.

ITCS Test Strip Development and Certification

NASA Technical Reports Server (NTRS)

Carrigan, Caitlin; Adam, Niklas; Pickering, Karen; Gazda, Daniel; Piowaty, Hailey

2011-01-01

Internal coolant loops used for International Space Station thermal control must be periodically monitored for system health, including pH, biocide levels and any indication of ammonia. The presence of ammonia, possible via a microleak in the interface between the internal and external thermal control systems, could be a danger to the crew. The Internal Thermal Control System (ITCS) Sampling Kit uses test strips as a colorimetric indicator of pH and concentrations of biocide and free ammonia. This paper describes the challenges in designing an ammonia colorimetric indicator in a variable pH environment, as well as lessons learned, ultimately resulting in a robust test strip to indicate a hazardous ammonia leak.

Vaginal microbial flora analysis by next generation sequencing and microarrays; can microbes indicate vaginal origin in a forensic context?

PubMed

Benschop, Corina C G; Quaak, Frederike C A; Boon, Mathilde E; Sijen, Titia; Kuiper, Irene

2012-03-01

Forensic analysis of biological traces generally encompasses the investigation of both the person who contributed to the trace and the body site(s) from which the trace originates. For instance, for sexual assault cases, it can be beneficial to distinguish vaginal samples from skin or saliva samples. In this study, we explored the use of microbial flora to indicate vaginal origin. First, we explored the vaginal microbiome for a large set of clinical vaginal samples (n = 240) by next generation sequencing (n = 338,184 sequence reads) and found 1,619 different sequences. Next, we selected 389 candidate probes targeting genera or species and designed a microarray, with which we analysed a diverse set of samples; 43 DNA extracts from vaginal samples and 25 DNA extracts from samples from other body sites, including sites in close proximity of or in contact with the vagina. Finally, we used the microarray results and next generation sequencing dataset to assess the potential for a future approach that uses microbial markers to indicate vaginal origin. Since no candidate genera/species were found to positively identify all vaginal DNA extracts on their own, while excluding all non-vaginal DNA extracts, we deduce that a reliable statement about the cellular origin of a biological trace should be based on the detection of multiple species within various genera. Microarray analysis of a sample will then render a microbial flora pattern that is probably best analysed in a probabilistic approach.

Integrating Public Perspectives in Sample Return Planning

NASA Technical Reports Server (NTRS)

Race, Margaret S.; MacGregor, G.

2001-01-01

Planning for extraterrestrial sample returns, whether from Mars or other solar system bodies, must be done in a way that integrates planetary protection concerns with the usual mission technical and scientific considerations. Understanding and addressing legitimate societal concerns about the possible risks of sample return will be a critical part of the public decision making process ahead. This paper presents the results of two studies, one with lay audiences, the other with expert microbiologists, designed to gather information, on attitudes and concerns about sample return risks and planetary protection. Focus group interviews with lay subjects, using generic information about Mars sample return and a preliminary environmental impact assessment, were designed to obtain an indication of how the factual content is perceived and understood by the public. A research survey of microbiologists gathered information on experts' views and attitudes about sample return, risk management approaches and space exploration risks. These findings, combined with earlier research results on risk perception, will be useful in identifying levels of concern and potential conflicts in understanding between experts and the public about sample return risks. The information will be helpful in guiding development of the environmental impact statement and also has applicability to proposals for sample return from other solar system bodies where scientific uncertainty about extraterrestrial life may persist at the time of mission planning.

Comparison of total coliform, fecal coliform, and enterococcus bacterial indicator response for ocean recreational water quality testing.

PubMed

Noble, R T; Moore, D F; Leecaster, M K; McGee, C D; Weisberg, S B

2003-04-01

In July 1999, California's ocean recreational bacterial water quality standards were changed from a total coliform (TC) test to a standard requiring testing for all three bacterial indicators: TC, fecal coliforms (FC), and enterococci (EC). To compare the relationship between the bacterial indicators, and the effect that changing the standards would have on recreational water regulatory actions, three regional studies were conducted along the southern California shoreline from Santa Barbara to San Diego, California. Two studies were conducted during dry weather and one following a large storm event. In each study, samples were collected at over 200 sites which were selected using a stratified random design, with strata consisting of open beach areas and rocky shoreline, and areas near freshwater outlets that drain land-based runoff. During the dry weather studies, samples were collected once per week for 5 weeks. For the storm event study, sampling occurred on a single day about 24 h following the storm. The three indicator bacteria were measured at each site and the results were compared to the single sample standards (TC > 10,000; FC > 400 and EC > 104 MPN or cfu/100 ml). EC was the indicator that failed the single sample standards most often. During the wet weather study, 99% of all standard failures were detected using EC, compared with only 56% for FC, and 40% for TC. During the Summer Study, EC was again the indicator that failed the single sample standards most often, with 60% of the failures for EC alone. The increased failure of the EC standard occurred consistently regardless of whether the sample was collected at a beach or rocky shoreline site, or at a site near a freshwater outlet. Agreement among indicators was better during wet weather than during dry weather. During dry weather, agreement among indicators was better near freshwater outlets than along open shoreline. Cumulatively, our results suggest that replacement of a TC standard with an EC standard will lead to a five-fold increase in failures during dry weather and a doubling of failures during wet weather. Replacing a TC standard with one based on all three indicators will lead to an eight-fold increase in failures. Changes in the requirements for water quality testing have strong implications for increases in beach closures and restrictions. Copyright 2002 Elsevier Science Ltd.

The Study on Mental Health at Work: Design and sampling.

PubMed

Rose, Uwe; Schiel, Stefan; Schröder, Helmut; Kleudgen, Martin; Tophoven, Silke; Rauch, Angela; Freude, Gabriele; Müller, Grit

2017-08-01

The Study on Mental Health at Work (S-MGA) generates the first nationwide representative survey enabling the exploration of the relationship between working conditions, mental health and functioning. This paper describes the study design, sampling procedures and data collection, and presents a summary of the sample characteristics. S-MGA is a representative study of German employees aged 31-60 years subject to social security contributions. The sample was drawn from the employment register based on a two-stage cluster sampling procedure. Firstly, 206 municipalities were randomly selected from a pool of 12,227 municipalities in Germany. Secondly, 13,590 addresses were drawn from the selected municipalities for the purpose of conducting 4500 face-to-face interviews. The questionnaire covers psychosocial working and employment conditions, measures of mental health, work ability and functioning. Data from personal interviews were combined with employment histories from register data. Descriptive statistics of socio-demographic characteristics and logistic regressions analyses were used for comparing population, gross sample and respondents. In total, 4511 face-to-face interviews were conducted. A test for sampling bias revealed that individuals in older cohorts participated more often, while individuals with an unknown educational level, residing in major cities or with a non-German ethnic background were slightly underrepresented. There is no indication of major deviations in characteristics between the basic population and the sample of respondents. Hence, S-MGA provides representative data for research on work and health, designed as a cohort study with plans to rerun the survey 5 years after the first assessment.

Assessment of wadeable stream resources in the driftless area ecoregion in Western Wisconsin using a probabilistic sampling design.

PubMed

Miller, Michael A; Colby, Alison C C; Kanehl, Paul D; Blocksom, Karen

2009-03-01

The Wisconsin Department of Natural Resources (WDNR), with support from the U.S. EPA, conducted an assessment of wadeable streams in the Driftless Area ecoregion in western Wisconsin using a probabilistic sampling design. This ecoregion encompasses 20% of Wisconsin's land area and contains 8,800 miles of perennial streams. Randomly-selected stream sites (n = 60) equally distributed among stream orders 1-4 were sampled. Watershed land use, riparian and in-stream habitat, water chemistry, macroinvertebrate, and fish assemblage data were collected at each true random site and an associated "modified-random" site on each stream that was accessed via a road crossing nearest to the true random site. Targeted least-disturbed reference sites (n = 22) were also sampled to develop reference conditions for various physical, chemical, and biological measures. Cumulative distribution function plots of various measures collected at the true random sites evaluated with reference condition thresholds, indicate that high proportions of the random sites (and by inference the entire Driftless Area wadeable stream population) show some level of degradation. Study results show no statistically significant differences between the true random and modified-random sample sites for any of the nine physical habitat, 11 water chemistry, seven macroinvertebrate, or eight fish metrics analyzed. In Wisconsin's Driftless Area, 79% of wadeable stream lengths were accessible via road crossings. While further evaluation of the statistical rigor of using a modified-random sampling design is warranted, sampling randomly-selected stream sites accessed via the nearest road crossing may provide a more economical way to apply probabilistic sampling in stream monitoring programs.

A Simulation Study on the Performance of the Simple Difference and Covariance-Adjusted Scores in Randomized Experimental Designs.

PubMed

Petscher, Yaacov; Schatschneider, Christopher

2011-01-01

Research by Huck and McLean (1975) demonstrated that the covariance-adjusted score is more powerful than the simple difference score, yet recent reviews indicate researchers are equally likely to use either score type in two-wave randomized experimental designs. A Monte Carlo simulation was conducted to examine the conditions under which the simple difference and covariance-adjusted scores were more or less powerful to detect treatment effects when relaxing certain assumptions made by Huck and McLean (1975). Four factors were manipulated in the design including sample size, normality of the pretest and posttest distributions, the correlation between pretest and posttest, and posttest variance. A 5 × 5 × 4 × 3 mostly crossed design was run with 1,000 replications per condition, resulting in 226,000 unique samples. The gain score was nearly as powerful as the covariance-adjusted score when pretest and posttest variances were equal, and as powerful in fan-spread growth conditions; thus, under certain circumstances the gain score could be used in two-wave randomized experimental designs.

A Simulation Study on the Performance of the Simple Difference and Covariance-Adjusted Scores in Randomized Experimental Designs

PubMed Central

Petscher, Yaacov; Schatschneider, Christopher

2015-01-01

Research by Huck and McLean (1975) demonstrated that the covariance-adjusted score is more powerful than the simple difference score, yet recent reviews indicate researchers are equally likely to use either score type in two-wave randomized experimental designs. A Monte Carlo simulation was conducted to examine the conditions under which the simple difference and covariance-adjusted scores were more or less powerful to detect treatment effects when relaxing certain assumptions made by Huck and McLean (1975). Four factors were manipulated in the design including sample size, normality of the pretest and posttest distributions, the correlation between pretest and posttest, and posttest variance. A 5 × 5 × 4 × 3 mostly crossed design was run with 1,000 replications per condition, resulting in 226,000 unique samples. The gain score was nearly as powerful as the covariance-adjusted score when pretest and posttest variances were equal, and as powerful in fan-spread growth conditions; thus, under certain circumstances the gain score could be used in two-wave randomized experimental designs. PMID:26379310

Novel Design for Centrifugal Countercurrent Chromatography: II. Studies on Novel Geometries of Zigzag Toroidal Tubing

PubMed Central

Yang, Yi; Aisa, Haji Akber; Ito, Yoichiro

2009-01-01

The toroidal column using a zigzag pattern has been improved in both retention of the stationary phase and peak resolution. To further improve the retention of stationary phase and peak resolution, a series of novel geometric designs of tubing (plain, mid-clamping, flattened and flat-twisted tubing) was evaluated their performance in CCC. The results showed that the tubing which was flattened vertically against centrifugal force (vert-flattened tubing) produced the best peak resolution among them. Using vert-flattened tubing a series of experiments was performed to study the effects of column capacity and sample size. The results indicated that a 0.25 ml capacity column is ideal for analysis of small amount samples. PMID:20454530

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hurley, D.F.; Whitehouse, J.M.

A dedicated low-flow groundwater sample collection system was designed for implementation in a post-closure ACL monitoring program at the Yaworski Lagoon NPL site in Canterbury, Connecticut. The system includes dedicated bladder pumps with intake ports located in the screened interval of the monitoring wells. This sampling technique was implemented in the spring of 1993. The system was designed to simultaneously obtain samples directly from the screened interval of nested wells in three distinct water bearing zones. Sample collection is begun upon stabilization of field parameters. Other than line volume, no prior purging of the well is required. It was foundmore » that dedicated low-flow sampling from the screened interval provides a method of representative sample collection without the bias of suspended solids introduced by traditional techniques of pumping and bailing. Analytical data indicate that measured chemical constituents are representative of groundwater migrating through the screened interval. Upon implementation of the low-flow monitoring system, analytical results exhibited a decrease in concentrations of some organic compounds and metals. The system has also proven to be a cost effective alternative to pumping and bailing which generate large volumes of purge water requiring containment and disposal.« less

Investigations related to evaluation of ultramicrofluorometer

NASA Technical Reports Server (NTRS)

Whitcomb, B.

1981-01-01

High resolution emission and excitation fluorescent spectra were obtained for several samples in an effort to determine the optimum operational design for the instrument. The instrument was used to determine the required nature of a sample which could be detected, and in so doing, several different sample preparation techniques were considered. Numerous experiments were performed to determine the capabilities of the instrument with regard to the detection of suitably prepared virus specimens. Significant results were obtained in several areas. The fluorescent spectra indicated that substantial changes in the laser might be used advantageously to greatly improve the performance of the instrument. In the existing configuration, the instrument was shown to be capable of detecting the presence of suitably prepared virus samples.

Fecal-indicator bacteria concentrations in the Illinois River between Hennepin and Peoria, Illinois: 2007-08

USGS Publications Warehouse

Dupre, David H.; Hortness, Jon E.; Terrio, Paul J.; Sharpe, Jennifer B.

2012-01-01

The Illinois Environmental Protection Agency has designated portions of the Illinois River in Peoria, Woodford, and Tazewell Counties, Illinois, as impaired owing to the presence of fecal coliform bacteria. The U.S. Geological Survey, in cooperation with the Tri-County Regional Planning Commission, examined the water quality in the Illinois River and major tributaries within a 47-mile reach between Peoria and Hennepin, Ill., during water year 2008 (October 2007–September 2008). Investigations included synoptic (snapshot) sampling at multiple locations in a 1-day period: once in October 2007 during lower streamflow conditions, and again in June 2008 during higher streamflow conditions. Five locations in the study area were monitored for the entire year at monthly or more frequent intervals. Two indicator bacteria were analyzed in each water sample: fecal coliform and Escherichia coli (E. coli). Streamflow information from previously established monitoring locations in the study area was used in the analysis. Correlation analyses were used to characterize the relation between the two fecal-indicator bacteria and the relation of either indicator to streamflow. Concentrations of the two measured fecal-indicator bacteria correlated well for all samples analyzed (r = 0.94, p E. coli: rho = -0.43, p = 0.0157). The correlation between fecal indicators and streamflow in tributaries or in the Illinois River at Hennepin was found to be statistically significant, yet moderate in strength with coefficient values ranging from r = 0.4 to 0.6. Indirect observations from the June 2008 higher flow synoptic event may indicate continued effects from combined storm and sanitary sewers in the vicinity of the Illinois River near Peoria, Ill., contributing to observed single-sample exceedance of the State criterion for fecal coliform.

Effects of Packstock Use and Backpackers on Water Quality in Yosemite National Park, California

NASA Astrophysics Data System (ADS)

Forrester, H.; Clow, D. W.; Roche, J. W.; Heyvaert, A.

2016-12-01

Visitor use, primarily backpacker camping, packstock (horse and mule) trail use, and packstock grazing, in designated Wilderness, increases the potential for negative effects on water quality. To determine the effects of visitor use on water quality in Wilderness in Yosemite National Park, we collected and analyzed surface-water samples for water quality indicators, consisting of fecal indicator bacteria (Escherichia coli), nutrients (nitrogen, phosphorus), suspended sediment concentration (SSC), and hormones (e.g. estrogen compounds) during the summers of 2012-2014. We collected samples upstream and downstream from different types of visitor use at routine intervals (weekly or biweekly) and during storms. Additionally, we sampled upstream and downstream from meadows, and targeted different types of visitor use during a park-wide synoptic sampling campaign (n=63). At packstock stream crossings, statistically significant (P≤0.05) increases in Escherichia coli (E. coli) and SSC occurred downstream from crossings compared to upstream conditions during routine sampling (median difference: 3 CFU 100ml-1, and >0.3 mg l-1, respectively) and during storms (median difference: 32 CFU 100ml-1, and 2.9 mg l-1). At backpacker campsites, during routine sampling, significant increases occurred downstream from backpacker camping for E. coli (median difference: 1 CFU 100ml-1), and estrogen hormones were detected. At packstock grazing areas, which are located in meadows, no significant increases were detected for any of the measured water quality indicators downstream from grazing. Most synoptic sample concentrations were near or below detection limits. Our results indicate that under current use levels: 1) packstock trail use and backpacker camping are associated with detectable effects on water quality, which are most pronounced during storms; 2) increases in water quality indicators were not detected downstream from meadows where packstock were grazed; and 3) environmental processes in meadows provide a valuable ecosystem service by reducing human related sources of microbial contamination.

Elements in cottonwood trees as an indicator of ground water contaminated by landfill leachate

USGS Publications Warehouse

Erdman, James A.; Christenson, Scott

2000-01-01

Ground water at the Norman Landfill Research Site is contaminated by a leachate plume emanating from a closed, unlined landfill formerly operated by the city of Norman, Oklahoma, Ground water contaminated by the leachate plume is known to be elevated in the concentration of many, organic and inorganic constituents. Specific conductance, alkalinity, chloride, dissolved organic carbon, boron, sodium, strontium, and deuterium in ground water are considered to be indicators of the leachate plume at this site. Leaf samples of broad-leafed cottonwood, Populus deltoides, were collected from 57 sites around the closed landfill. Cottonwood, a phreatophyte or “well plant,” functions as a & surrogate well and serves as a ground water quality sampler. The leaf samples were combusted to ash and analyzed by instrumental neutron activation for 35 elements and by prompt-gamma instrumental neutron activation, for boron. A monitoring well was located within a few meters of a sampled cottonwood tree at 15 of the 57 sites, and ground water samples were collected from these monitoring wells simultaneously with a leaf sample. The chemical analyses of the ground water and leaf samples from these 15 sites indicated that boron, bromine, sodium, and strontium concentrations in leaves were significantly correlated with leachate indicator constituents in ground water. A point-plot map of selected percentiles indicated high concentrations of boron, bromine, and sodium in leaf ash from sites downgradient of the most recent landfill and from older landfills nearby. Data from leaf analysis greatly extended the known areal extent of the leachate plume previously determined from a network of monitoring wells and geophysical surveys. This phytosgeochemical study provided a cost-effective method for assessing the extent of a leachate plume from an old landfill. Such a method may be useful as a preliminary sampling tool to guide the design of hydrogeochemical and geophysical studies.

An investigation of new metal framework design for metal ceramic restorations.

PubMed

O'Boyle, K H; Norling, B K; Cagna, D R; Phoenix, R D

1997-09-01

Metal ceramic restorations have been implicated in the discoloration of associated gingival tissues. Attempts to remedy this by altering the design of the metal frameworks for such restorations may lead to unacceptable decreases in fracture resistance. This study evaluated a new metal framework design for metal-ceramic restorations. Twenty artificial crowns were fabricated with various degrees of facial metal reduction; 0, 1, 2, and 3 mm. The study was conducted in two parts. The first part evaluated changes in light transmission into adjacent root tissue. A light box was fabricated so sample crowns could be illuminated on a mounted natural tooth. The root of the tooth remained outside the light box, and the light transmitted through the crowns into root tissue was measured with a light meter. The second part of the study evaluated changes in fracture strength. The sample crowns were subjected to a vertical load until fracture with use of an Instron machine at a crosshead speed of 1 mm per minute. The load at fracture was recorded. Results indicated a statistically significant increase in light transmission with 1 mm framework reduction or greater, and fracture strengths did not decrease with up to 1 mm of framework reduction. A 1 mm facial axial reduction of the metal framework may be indicated for anterior metal-ceramic restorations.

[Sampling optimization for tropical invertebrates: an example using dung beetles (Coleoptera: Scarabaeinae) in Venezuela].

PubMed

Ferrer-Paris, José Rafael; Sánchez-Mercado, Ada; Rodríguez, Jon Paul

2013-03-01

The development of efficient sampling protocols is an essential prerequisite to evaluate and identify priority conservation areas. There are f ew protocols for fauna inventory and monitoring in wide geographical scales for the tropics, where the complexity of communities and high biodiversity levels, make the implementation of efficient protocols more difficult. We proposed here a simple strategy to optimize the capture of dung beetles, applied to sampling with baited traps and generalizable to other sampling methods. We analyzed data from eight transects sampled between 2006-2008 withthe aim to develop an uniform sampling design, that allows to confidently estimate species richness, abundance and composition at wide geographical scales. We examined four characteristics of any sampling design that affect the effectiveness of the sampling effort: the number of traps, sampling duration, type and proportion of bait, and spatial arrangement of the traps along transects. We used species accumulation curves, rank-abundance plots, indicator species analysis, and multivariate correlograms. We captured 40 337 individuals (115 species/morphospecies of 23 genera). Most species were attracted by both dung and carrion, but two thirds had greater relative abundance in traps baited with human dung. Different aspects of the sampling design influenced each diversity attribute in different ways. To obtain reliable richness estimates, the number of traps was the most important aspect. Accurate abundance estimates were obtained when the sampling period was increased, while the spatial arrangement of traps was determinant to capture the species composition pattern. An optimum sampling strategy for accurate estimates of richness, abundance and diversity should: (1) set 50-70 traps to maximize the number of species detected, (2) get samples during 48-72 hours and set trap groups along the transect to reliably estimate species abundance, (3) set traps in groups of at least 10 traps to suitably record the local species composition, and (4) separate trap groups by a distance greater than 5-10km to avoid spatial autocorrelation. For the evaluation of other sampling protocols we recommend to, first, identify the elements of sampling design that could affect the sampled effort (the number of traps, sampling duration, type and proportion of bait) and their spatial distribution (spatial arrangement of the traps) and then, to evaluate how they affect richness, abundance and species composition estimates.

User's Guide for Monthly Vector Wind Profile Model

NASA Technical Reports Server (NTRS)

Adelfang, S. I.

1999-01-01

The background, theoretical concepts, and methodology for construction of vector wind profiles based on a statistical model are presented. The derived monthly vector wind profiles are to be applied by the launch vehicle design community for establishing realistic estimates of critical vehicle design parameter dispersions related to wind profile dispersions. During initial studies a number of months are used to establish the model profiles that produce the largest monthly dispersions of ascent vehicle aerodynamic load indicators. The largest monthly dispersions for wind, which occur during the winter high-wind months, are used for establishing the design reference dispersions for the aerodynamic load indicators. This document includes a description of the computational process for the vector wind model including specification of input data, parameter settings, and output data formats. Sample output data listings are provided to aid the user in the verification of test output.

Interdisciplinary lifestyle intervention for weight management in a community population (HealthTrack study): Study design and baseline sample characteristics.

PubMed

Tapsell, Linda C; Lonergan, Maureen; Martin, Allison; Batterham, Marijka J; Neale, Elizabeth P

2015-11-01

Integrating professional expertise in diet, exercise and behavioural support may provide more effective preventive health services but this needs testing. We describe the design and baseline results of a trial in the Illawarra region of New South Wales, Australia. The HealthTrack study is a 12 month randomised controlled trial testing effects of a novel interdisciplinary lifestyle intervention versus usual care. The study recruited overweight and obese adults 25-54 years resident in the Illawarra. Primary outcomes were weight, and secondary outcomes were disease risk factors (lipids, glucose, blood pressure), and behaviour (diet, activity, and psychological factors). Protocols, recruitment and baseline characteristics are reported. Between May 2014 and April 2015, 377 participants were recruited and randomised. The median age (IQR) of the mostly female sample (74%) was 45 (37-51) years. The sample comprised obese (BMI 32 (29-35) kg/m(2)) well educated (79% post school qualifications) non-smokers (96%). A high proportion reported suffering from anxiety (26.8%) and depression (33.7%). Metabolic syndrome was identified in 34.9% of the sample. The HealthTrack study sample was recruited to test the effectiveness of an interdisciplinary approach to preventive healthcare in self-identified overweight adults in the Illawarra region. The profile of participants gives some indication of those likely to use services similar to the trial design. Copyright © 2015 Elsevier Inc. All rights reserved.

Mode Equivalence of Health Indicators Between Data Collection Modes and Mixed-Mode Survey Designs in Population-Based Health Interview Surveys for Children and Adolescents: Methodological Study

PubMed Central

Hoffmann, Robert; Houben, Robin; Krause, Laura; Kamtsiuris, Panagiotis; Gößwald, Antje

2018-01-01

Background The implementation of an Internet option in an existing public health interview survey using a mixed-mode design is attractive because of lower costs and faster data availability. Additionally, mixed-mode surveys can increase response rates and improve sample composition. However, mixed-mode designs can increase the risk of measurement error (mode effects). Objective This study aimed to determine whether the prevalence rates or mean values of self- and parent-reported health indicators for children and adolescents aged 0-17 years differ between self-administered paper-based questionnaires (SAQ-paper) and self-administered Web-based questionnaires (SAQ-Web), as well as between a single-mode control group and different mixed-mode groups. Methods Data were collected for a methodological pilot of the third wave of the "German Health Interview and Examination Survey for Children and Adolescents". Questionnaires were completed by parents or adolescents. A population-based sample of 11,140 children and adolescents aged 0-17 years was randomly allocated to 4 survey designs—a single-mode control group with paper-and-pencil questionnaires only (n=970 parents, n=343 adolescents)—and 3 mixed-mode designs, all of which offered Web-based questionnaire options. In the concurrent mixed-mode design, both questionnaires were offered at the same time (n=946 parents, n=290 adolescents); in the sequential mixed-mode design, the SAQ-Web was sent first, followed by the paper questionnaire along with a reminder (n=854 parents, n=269 adolescents); and in the preselect mixed-mode design, both options were offered and the respondents were asked to request the desired type of questionnaire (n=698 parents, n=292 adolescents). In total, 3468 questionnaires of parents of children aged 0-17 years (SAQ-Web: n=708; SAQ-paper: n=2760) and 1194 questionnaires of adolescents aged 11-17 years (SAQ-Web: n=299; SAQ-paper: n=895) were analyzed. Sociodemographic characteristics and a broad range of health indicators for children and adolescents were compared by survey design and data collection mode by calculating predictive margins from regression models. Results There were no statistically significant differences in sociodemographic characteristics or health indicators between the single-mode control group and any of the mixed-mode survey designs. Differences in sociodemographic characteristics between SAQ-Web and SAQ-paper were found. Web respondents were more likely to be male, have higher levels of education, and higher household income compared with paper respondents. After adjusting for sociodemographic characteristics, only one of the 38 analyzed health indicators showed different prevalence rates between the data collection modes, with a higher prevalence rate for lifetime alcohol consumption among the online-responding adolescents (P<.001). Conclusions These results suggest that mode bias is limited in health interview surveys for children and adolescents using a mixed-mode design with Web-based and paper questionnaires. PMID:29506967

A 20-Year Examination of the Perceptions of Business School Interns: A Longitudinal Case Study

ERIC Educational Resources Information Center

Cook, Sherry James; Stokes, Amy; Parker, Richard Stephen

2015-01-01

The authors examined students' attitudes toward specific elements of an ongoing internship program. The study sample consisted of 816 student interns from 25 different colleges and universities. Results indicate that despite significant changes in instructional design and the incorporation of new technologies into the learning environment,…

An Assessment of Well-Being of Principals in Flemish Primary Schools

ERIC Educational Resources Information Center

Devos, G.; Bouckenooghe, D.; Engels, N.; Hotton, G.; Aelterman, A.

2007-01-01

Purpose: The goal of this inquiry is to indicate which individual, organisational and external environment factors contribute to a better understanding of the well-being of Flemish primary school principals. Design/methodology/approach: Data from a representative sample of primary schools in Flanders (n = 46) were gathered through questionnaires…

The Adult Reading History Questionnaire (ARHQ) in Icelandic: Psychometric Properties and Factor Structure

ERIC Educational Resources Information Center

Bjornsdottir, Gyda; Halldorsson, Jonas G.; Steinberg, Stacy; Hansdottir, Ingunn; Kristjansson, Kristleifur; Stefansson, Hreinn; Stefansson, Kari

2014-01-01

This article describes psychometric testing of an Icelandic adaptation of the "Adult Reading History Questionnaire" (ARHQ), designed to detect a history of reading difficulties indicative of dyslexia. Tested in a large and diverse sample of 2,187 adults, the Icelandic adaptation demonstrated internal consistency reliability (Cronbach's…

Recovery Experiences of Taiwanese Women after Terminating Abusive Relationships: A Phenomenology Study

ERIC Educational Resources Information Center

Hou, Wen-Li; Ko, Nai-Ying; Shu, Bih-Ching

2013-01-01

This article describes the recovery experiences of women who had suffered intimate partner violence in Taiwan. A phenomenological study design using semi-structured interviews was used to obtain data from a purposive sample of eight women. Colaizzi's approach to narrative analysis was applied. Findings indicate that "reconstructing the self"…

A Closer Look at Motor Overflow in Dyslexic Children.

ERIC Educational Resources Information Center

Parlow, S. E.

Unintentional movement "overflow" between the hands or "mirror movements" are common in young children, but are generally regarded as indicative of developmental delay in older children. This study was designed to investigate mirror movements in a sample of 23 very poor readers, ages 11-13, with learning disabilities, and in a…

Adiposity and Quality of Life: A Case Study from an Urban Center in Nigeria

ERIC Educational Resources Information Center

Akinpelu, Aderonke O.; Akinola, Odunayo T.; Gbiri, Caleb A.

2009-01-01

Objective: To determine relationship between adiposity indices and quality of life (QOL) of residents of a housing estate in Lagos, Nigeria. Design: Cross-sectional survey employing multistep random sampling method. Setting: Urban residential estate. Participants: This study involved 900 randomly selected residents of Abesan Housing Estate, Lagos,…

CRC Credential Attainment by State Vocational Rehabilitation Counselors

ERIC Educational Resources Information Center

Harpster, Anna M.; Byers, Katherine L.; Harris, LaKeisha L.

2011-01-01

This study examines 137 state vocational rehabilitation (VR) counselors' perceptions of the value of having the Certified Rehabilitation Counselor (CRC) credential. While almost 53% of this sample included persons who were certified, the majority who were not indicated that the two major reasons for not currently having this designation were: (a)…

Oral Health Status and Behaviour of Mauritians Visiting Private Dental Clinics

ERIC Educational Resources Information Center

Gunsam, P. Pugo; Banka, S.

2011-01-01

Purpose: This paper seeks to assess the oral health status and behaviour of a sample of the Mauritian population visiting private dental clinics. Design/methodology/approach: Oral health status was determined using the World Health Organization (Decayed, Missing, Filled Teeth (DMFT) index indicating the prevalence of caries, and factors associated…

Participant-Based Monitoring of Indoor and Outdoor Nitrogen Dioxide, Volatile Organic Compounds, and Polycyclic Aromatic Hydrocarbons among MICA-Air Households

EPA Science Inventory

The Mechanistic Indicators of Childhood Asthma (MICA) study in Detroit, Michigan introduced a participant-based approach to reduce the resource burden associated with collection of indoor and outdoor residential air sampling data. A subset of participants designated as MICA-Air c...

INDICATORS OF ECOLOGICAL STRESS AND THEIR EXTENT IN THE POPULATION OF NORTHEASTERN LAKES: A REGIONAL-SCALE ASSESSMENT

EPA Science Inventory

One of the Environmental Monitoring and Assessment Program's first projects was a survey of 345 lakes in the eight states of the Northeast, during summers of 1991-1996. This survey was the first regional-scale attempt to use a probability-based sampling design to collect biolog...

Evaluating Quality in Associate Degree Culinary Arts Programs

ERIC Educational Resources Information Center

Hertzman, Jean; Ackerman, Robert

2010-01-01

Purpose: The purpose of this study is to determine which categories and indicators of quality are best suited to evaluating associate degree culinary arts programs (ADCAP). Design/methodology/approach: The researchers surveyed a national sample of culinary educators and industry chefs in the USA. The instrument asked the participants to rate the…

Measuring and Promoting Acceptance of Young Children with Disabilities.

ERIC Educational Resources Information Center

Favazza, Paddy C.; Phillipsen, Leslie; Kumar, Poonam

2000-01-01

Results of two studies indicate the Acceptance Scale for Kindergartners was reliable with a sample of minority, low socioeconomic status children and that children exposed to all of the components of an intervention designed to promote acceptance of young children with disabilities had short-term and long-term gains in acceptance. (Contains…

How-to-Do-It: Why Don't Cells Grow Larger? A Lab Exercise.

ERIC Educational Resources Information Center

Stanek, Joseph A., Jr.

1983-01-01

Describes a laboratory investigation designed to analyze surface area to volume ratio related to cell division. Uses agar-gel "cells" with pH indicator added which are then "fed" acid for a measured time. Discusses procedures and materials used, providing a sample data table and important guiding questions. (JM)

Stages of Change in Relationship Status Questionnaire: Development and Validation

ERIC Educational Resources Information Center

Ritter, Kathrin; Handsel, Vanessa; Moore, Todd

2016-01-01

This study involved the development of the Stages of Change in Relationship Status (SOCRS) measure in 2 samples of college students. This scale is designed to measure how individuals progress through stages of change when terminating violent and nonviolent intimate relationships. Results indicated that the SOCRS is a reliable and valid tool to…

Quality-assurance design applied to an assessment of agricultural pesticides in ground water from carbonate bedrock aquifers in the Great Valley of eastern Pennsylvania

USGS Publications Warehouse

Breen, Kevin J.

2000-01-01

Assessments to determine whether agricultural pesticides are present in ground water are performed by the Commonwealth of Pennsylvania under the aquifer monitoring provisions of the State Pesticides and Ground Water Strategy. Pennsylvania's Department of Agriculture conducts the monitoring and collects samples; the Department of Environmental Protection (PaDEP) Laboratory analyzes the samples to measure pesticide concentration. To evaluate the quality of the measurements of pesticide concentration for a groundwater assessment, a quality-assurance design was developed and applied to a selected assessment area in Pennsylvania. This report describes the quality-assurance design, describes how and where the design was applied, describes procedures used to collect and analyze samples and to evaluate the results, and summarizes the quality assurance results along with the assessment results.The design was applied in an agricultural area of the Delaware River Basin in Berks, Lebanon, Lehigh, and Northampton Counties to evaluate the bias and variability in laboratory results for pesticides. The design—with random spatial and temporal components—included four data-quality objectives for bias and variability. The spatial design was primary and represented an area comprising 30 sampling cells. A quality-assurance sampling frequency of 20 percent of cells was selected to ensure a sample number of five or more for analysis. Quality-control samples included blanks, spikes, and replicates of laboratory water and spikes, replicates, and 2-lab splits of groundwater. Two analytical laboratories, the PaDEP Laboratory and a U.S. Geological Survey Laboratory, were part of the design. Bias and variability were evaluated by use of data collected from October 1997 through January 1998 for alachlor, atrazine, cyanazine, metolachlor, simazine, pendimethalin, metribuzin, and chlorpyrifos.Results of analyses of field blanks indicate that collection, processing, transport, and laboratory analysis procedures did not contaminate the samples; there were no false-positive results. Pesticides were detected in water when pesticides were spiked into (added to) samples. There were no false negatives for the eight pesticides in all spiked samples. Negative bias was characteristic of analytical results for the eight pesticides, and bias was generally in excess of 10 percent from the ‘true’ or expected concentration (34 of 39 analyses, or 87 percent of the ground-water results) for pesticide concentrations ranging from 0.31 to 0.51 mg/L (micrograms per liter). The magnitude of the negative bias for the eight pesticides, with the exception of cyanazine, would result in reported concentrations commonly 75-80 percent of the expected concentration in the water sample. The bias for cyanazine was negative and within 10 percent of the expected concentration. A comparison of spiked pesticide-concentration recoveries in laboratory water and ground water indicated no effect of the ground-water matrix, and matrix interference was not a source of the negative bias. Results for the laboratory-water spikes submitted in triplicate showed large variability for recoveries of atrazine, cyanazine, and pendimethalin. The relative standard deviation (RSD) was used as a measure of method variability over the course of the study for laboratory waters at a concentration of 0.4 mg/L. An RSD of about 11 percent (or about ?0.05 mg/L)characterizes the method results for alachlor, chlorpyrifos, metolachlor, metribuzin, and simazine. Atrazine and pendimethalin have RSD values of about 17 and 23 percent, respectively. Cyanazine showed the largest RSD at nearly 51 percent. The pesticides with low variability in laboratory-water spikes also had low variability in ground water.The assessment results showed that atrazinewas the most commonly detected pesticide in ground water in the assessment area. Atrazine was detected in water from 22 of the 28 wells sampled, and recovery results for atrazine were some of the worst (largest negative bias). Concentrations of the eight pesticides in ground water from wells were generally less than 0.3 µg/L. Only six individual measurements of the concentrations in water from six of the wells were at or above 0.3 µg/L, five for atrazine and one for metolachlor. There were eight additional detections of metolachlor and simazine at concentrations less than 0.1 µg/L. No well water contained more than one pesticide at concentra-tions at or above 0.3 µg/L. Evidence exists, how-ever, for a pattern of co-occurrence of metolachlor and simazine at low concentrations with higher concentrations of atrazine.Large variability in replicate samples and negative bias for pesticide recovery from spiked samples indicate the need to use data for pesticide recovery in the interpretation of measured pesti-cide concentrations in ground water. Data from samples spiked with known amounts of pesticides were a critical component of a quality-assurance design for the monitoring component of the Pesti-cides and Ground Water Strategy.Trigger concentrations, the concentrations that require action under the Pesticides and Ground Water Strategy, should be considered maximums for action. This consideration is needed because of the magnitude of negative bias.

Rapid quantification of multi-components in alcohol precipitation liquid of Codonopsis Radix using near infrared spectroscopy (NIRS).

PubMed

Luo, Yu; Li, Wen-Long; Huang, Wen-Hua; Liu, Xue-Hua; Song, Yan-Gang; Qu, Hai-Bin

2017-05-01

A near infrared spectroscopy (NIRS) approach was established for quality control of the alcohol precipitation liquid in the manufacture of Codonopsis Radix. By applying NIRS with multivariate analysis, it was possible to build variation into the calibration sample set, and the Plackett-Burman design, Box-Behnken design, and a concentrating-diluting method were used to obtain the sample set covered with sufficient fluctuation of process parameters and extended concentration information. NIR data were calibrated to predict the four quality indicators using partial least squares regression (PLSR). In the four calibration models, the root mean squares errors of prediction (RMSEPs) were 1.22 μg/ml, 10.5 μg/ml, 1.43 μg/ml, and 0.433% for lobetyolin, total flavonoids, pigments, and total solid contents, respectively. The results indicated that multi-components quantification of the alcohol precipitation liquid of Codonopsis Radix could be achieved with an NIRS-based method, which offers a useful tool for real-time release testing (RTRT) of intermediates in the manufacture of Codonopsis Radix.

Rigorously testing multialternative decision field theory against random utility models.

PubMed

Berkowitsch, Nicolas A J; Scheibehenne, Benjamin; Rieskamp, Jörg

2014-06-01

Cognitive models of decision making aim to explain the process underlying observed choices. Here, we test a sequential sampling model of decision making, multialternative decision field theory (MDFT; Roe, Busemeyer, & Townsend, 2001), on empirical grounds and compare it against 2 established random utility models of choice: the probit and the logit model. Using a within-subject experimental design, participants in 2 studies repeatedly choose among sets of options (consumer products) described on several attributes. The results of Study 1 showed that all models predicted participants' choices equally well. In Study 2, in which the choice sets were explicitly designed to distinguish the models, MDFT had an advantage in predicting the observed choices. Study 2 further revealed the occurrence of multiple context effects within single participants, indicating an interdependent evaluation of choice options and correlations between different context effects. In sum, the results indicate that sequential sampling models can provide relevant insights into the cognitive process underlying preferential choices and thus can lead to better choice predictions. PsycINFO Database Record (c) 2014 APA, all rights reserved.

The impact of a prevention delivery system on perceived social capital: the PROSPER project.

PubMed

Chilenski, Sarah M; Ang, Patricia M; Greenberg, Mark T; Feinberg, Mark E; Spoth, Richard

2014-04-01

The current study examined the impact of the PROSPER delivery system for evidence-based prevention programs on multiple indicators of social capital in a rural and semi-rural community sample. Utilizing a randomized blocked design, 317 individuals in 28 communities across two states were interviewed at three time points over the course of 2.5 years. Bridging, linking, and the public life skills forms of social capital were assessed via community members' and leaders' reports on the perceptions of school functioning and the Cooperative Extension System, collaboration among organizations, communication and collaboration around youth problems, and other measures. Longitudinal mixed model results indicate significant improvements in some aspects of bridging and linking social capital in PROSPER intervention communities. Given the strength of the longitudinal and randomized research design, results advance prevention science by suggesting that community collaborative prevention initiatives can significantly impact community social capital in a rural and semi-rural sample. Future research should further investigate changes in social capital in different contexts and how changes in social capital relate to other intervention effects.

Development and optimization of SPE-HPLC-UV/ELSD for simultaneous determination of nine bioactive components in Shenqi Fuzheng Injection based on Quality by Design principles.

PubMed

Wang, Lu; Qu, Haibin

2016-03-01

A method combining solid phase extraction, high performance liquid chromatography, and ultraviolet/evaporative light scattering detection (SPE-HPLC-UV/ELSD) was developed according to Quality by Design (QbD) principles and used to assay nine bioactive compounds within a botanical drug, Shenqi Fuzheng Injection. Risk assessment and a Plackett-Burman design were utilized to evaluate the impact of 11 factors on the resolutions and signal-to-noise of chromatographic peaks. Multiple regression and Pareto ranking analysis indicated that the sorbent mass, sample volume, flow rate, column temperature, evaporator temperature, and gas flow rate were statistically significant (p < 0.05) in this procedure. Furthermore, a Box-Behnken design combined with response surface analysis was employed to study the relationships between the quality of SPE-HPLC-UV/ELSD analysis and four significant factors, i.e., flow rate, column temperature, evaporator temperature, and gas flow rate. An analytical design space of SPE-HPLC-UV/ELSD was then constructed by calculated Monte Carlo probability. In the presented approach, the operating parameters of sample preparation, chromatographic separation, and compound detection were investigated simultaneously. Eight terms of method validation, i.e., system-suitability tests, method robustness/ruggedness, sensitivity, precision, repeatability, linearity, accuracy, and stability, were accomplished at a selected working point. These results revealed that the QbD principles were suitable in the development of analytical procedures for samples in complex matrices. Meanwhile, the analytical quality and method robustness were validated by the analytical design space. The presented strategy provides a tutorial on the development of a robust QbD-compliant quantitative method for samples in complex matrices.

Feasibility of Recruiting a Diverse Sample of Men Who Have Sex with Men: Observation from Nanjing, China

PubMed Central

Tang, Weiming; Yang, Haitao; Mahapatra, Tanmay; Huan, Xiping; Yan, Hongjing; Li, Jianjun; Fu, Gengfeng; Zhao, Jinkou; Detels, Roger

2013-01-01

Background Respondent-driven-sampling (RDS) has well been recognized as a method for sampling from most hard-to-reach populations like commercial sex workers, drug users and men who have sex with men. However the feasibility of this sampling strategy in terms of recruiting a diverse spectrum of these hidden populations has not been understood well yet in developing countries. Methods In a cross sectional study in Nanjing city of Jiangsu province of China, 430 MSM were recruited including 9 seeds in 14 weeks of study period using RDS. Information regarding socio-demographic characteristics and sexual risk behavior were collected and testing was done for HIV and syphilis. Duration, completion, participant characteristics and the equilibrium of key factors were used for assessing feasibility of RDS. Homophily of key variables, socio-demographic distribution and social network size were used as the indicators of diversity. Results In the study sample, adjusted HIV and syphilis prevalence were 6.6% and 14.6% respectively. Majority (96.3%) of the participants were recruited by members of their own social network. Although there was a tendency for recruitment within the same self-identified group (homosexuals recruited 60.0% homosexuals), considerable cross-group recruitment (bisexuals recruited 52.3% homosexuals) was also seen. Homophily of the self-identified sexual orientations was 0.111 for homosexuals. Upon completion of the recruitment process, participant characteristics and the equilibrium of key factors indicated that RDS was feasible for sampling MSM in Nanjing. Participants recruited by RDS were found to be diverse after assessing the homophily of key variables in successive waves of recruitment, the proportion of characteristics after reaching equilibrium and the social network size. The observed design effects were nearly the same or even better than the theoretical design effect of 2. Conclusion RDS was found to be an efficient and feasible sampling method for recruiting a diverse sample of MSM in a reasonable time. PMID:24244280

Patient‐centred improvements in health‐care built environments: perspectives and design indicators

PubMed Central

Douglas, Calbert H.; Douglas, Mary R.

2005-01-01

Abstract Objective  To explore patients’ perceptions of health‐care built environments, to assess how they perceived health‐care built facilities and designs. To develop a set of patient‐centred indicators by which to appraise future health‐care designs. Design  Qualitative and quantitative methodologies, including futures group conferencing, autophotographic study, novice‐expert exchanges and a questionnaire survey of a representative sample of past patients. Setting and participants  The research was carried out at Salford Royal Hospitals NHS Trust (SRHT), Greater Manchester, UK, selected for the study because of planned comprehensive redevelopment based on the new NHS vision for hospital care and service delivery for the 21st century. Participants included 35 patients who took part in an autophotographic study, eight focus groups engaged in futures conferencing, a sample of past inpatients from the previous 12 months that returned 785 completed postal questionnaires. Results  The futures group provided suggestions for radical improvements which were categorized into transport issues; accessibility and mobility; ground and landscape designs; social and public spaces; homeliness and assurance; cultural diversity; safety and security; personal space and access to outside. Patients’ autophotographic study centred on: the quality of the ward design, human interactions, the state and quality of personal space, and facilities for recreation and leisure. The novices’ suggestions were organized into categories of elemental factors representing patient‐friendly designs. Experts from the architectural and surveying professions and staff at SRHT in turn considered these categories and respective subsets of factors. They agreed with the novices in terms of the headings but differed in prioritizing the elemental factors. The questionnaire survey of past patients provided opinions about ward designs that varied according to where they stayed, single room, bay ward or long open ward. The main concerns were limitation of private space around the bed area, supportive of privacy and dignity, ward noise and other disturbances. Conclusions  Patients perceived sustainable health‐care environments to be supportive of their health and recovery. The design indicators developed from their perspectives and from their considerations for improvements to the health‐care built environment were based on their visions of the role of the health‐care facilities. These were homely environments that supported normal lifestyle and family functioning and designs that were supportive of accessibility and travel movements through transitional spaces. PMID:16098156

Assessment of Genetics Understanding. Under What Conditions Do Situational Features Have an Impact on Measures?

NASA Astrophysics Data System (ADS)

Schmiemann, Philipp; Nehm, Ross H.; Tornabene, Robyn E.

2017-12-01

Understanding how situational features of assessment tasks impact reasoning is important for many educational pursuits, notably the selection of curricular examples to illustrate phenomena, the design of formative and summative assessment items, and determination of whether instruction has fostered the development of abstract schemas divorced from particular instances. The goal of our study was to employ an experimental research design to quantify the degree to which situational features impact inferences about participants' understanding of Mendelian genetics. Two participant samples from different educational levels and cultural backgrounds (high school, n = 480; university, n = 444; Germany and USA) were used to test for context effects. A multi-matrix test design was employed, and item packets differing in situational features (e.g., plant, animal, human, fictitious) were randomly distributed to participants in the two samples. Rasch analyses of participant scores from both samples produced good item fit, person reliability, and item reliability and indicated that the university sample displayed stronger performance on the items compared to the high school sample. We found, surprisingly, that in both samples, no significant differences in performance occurred among the animal, plant, and human item contexts, or between the fictitious and "real" item contexts. In the university sample, we were also able to test for differences in performance between genders, among ethnic groups, and by prior biology coursework. None of these factors had a meaningful impact upon performance or context effects. Thus some, but not all, types of genetics problem solving or item formats are impacted by situational features.

Sample size re-assessment leading to a raised sample size does not inflate type I error rate under mild conditions.

PubMed

Broberg, Per

2013-07-19

One major concern with adaptive designs, such as the sample size adjustable designs, has been the fear of inflating the type I error rate. In (Stat Med 23:1023-1038, 2004) it is however proven that when observations follow a normal distribution and the interim result show promise, meaning that the conditional power exceeds 50%, type I error rate is protected. This bound and the distributional assumptions may seem to impose undesirable restrictions on the use of these designs. In (Stat Med 30:3267-3284, 2011) the possibility of going below 50% is explored and a region that permits an increased sample size without inflation is defined in terms of the conditional power at the interim. A criterion which is implicit in (Stat Med 30:3267-3284, 2011) is derived by elementary methods and expressed in terms of the test statistic at the interim to simplify practical use. Mathematical and computational details concerning this criterion are exhibited. Under very general conditions the type I error rate is preserved under sample size adjustable schemes that permit a raise. The main result states that for normally distributed observations raising the sample size when the result looks promising, where the definition of promising depends on the amount of knowledge gathered so far, guarantees the protection of the type I error rate. Also, in the many situations where the test statistic approximately follows a normal law, the deviation from the main result remains negligible. This article provides details regarding the Weibull and binomial distributions and indicates how one may approach these distributions within the current setting. There is thus reason to consider such designs more often, since they offer a means of adjusting an important design feature at little or no cost in terms of error rate.

Modification of wool surface by liposomes for dyeing with weld.

PubMed

Montazer, Majid; Zolfaghari, Alireza; Toliat, Taibeh; Moghadam, Mohammad Bameni

2009-01-01

In this research work, wool surface has been modified by liposome to investigate its effects on dyeing with weld, a yellow natural dye. To do this, samples were first treated with aluminium sulphate and afterward with different concentrations of liposomes at various temperatures for 30 minutes and, finally, dyed with weld at 75, 85, and 95 degrees C for 30, 45, and 60 minutes. K/S values of fabric samples were calculated and washing, light and rub fastness properties of the samples were indicated. The results proposed that the sample treated with 1% liposomes and dyed at 75 degrees C for 60 min has the highest K/S value. The central composite design (CCD) used for the experimental plan with three variables on the results of color strength and statistical analysis confirms the optimum conditions obtained by the experimental results. It was also found that washing, light, wet, and dry rub fastness properties of samples dyed with weld, including liposomes, have not significantly changed. The results of water drop absorption indicated that the hydrophobicity is higher for the samples pretreated with liposomes. The SEM picture of wool sample treated with mordant and liposomes and finally dyed with weld shows a coated layer on the fiber surface.

Simulating future uncertainty to guide the selection of survey designs for long-term monitoring

USGS Publications Warehouse

Garman, Steven L.; Schweiger, E. William; Manier, Daniel J.; Gitzen, Robert A.; Millspaugh, Joshua J.; Cooper, Andrew B.; Licht, Daniel S.

2012-01-01

A goal of environmental monitoring is to provide sound information on the status and trends of natural resources (Messer et al. 1991, Theobald et al. 2007, Fancy et al. 2009). When monitoring observations are acquired by measuring a subset of the population of interest, probability sampling as part of a well-constructed survey design provides the most reliable and legally defensible approach to achieve this goal (Cochran 1977, Olsen et al. 1999, Schreuder et al. 2004; see Chapters 2, 5, 6, 7). Previous works have described the fundamentals of sample surveys (e.g. Hansen et al. 1953, Kish 1965). Interest in survey designs and monitoring over the past 15 years has led to extensive evaluations and new developments of sample selection methods (Stevens and Olsen 2004), of strategies for allocating sample units in space and time (Urquhart et al. 1993, Overton and Stehman 1996, Urquhart and Kincaid 1999), and of estimation (Lesser and Overton 1994, Overton and Stehman 1995) and variance properties (Larsen et al. 1995, Stevens and Olsen 2003) of survey designs. Carefully planned, “scientific” (Chapter 5) survey designs have become a standard in contemporary monitoring of natural resources. Based on our experience with the long-term monitoring program of the US National Park Service (NPS; Fancy et al. 2009; Chapters 16, 22), operational survey designs tend to be selected using the following procedures. For a monitoring indicator (i.e. variable or response), a minimum detectable trend requirement is specified, based on the minimum level of change that would result in meaningful change (e.g. degradation). A probability of detecting this trend (statistical power) and an acceptable level of uncertainty (Type I error; see Chapter 2) within a specified time frame (e.g. 10 years) are specified to ensure timely detection. Explicit statements of the minimum detectable trend, the time frame for detecting the minimum trend, power, and acceptable probability of Type I error (α) collectively form the quantitative sampling objective.

Evaluation of Nine Consensus Indices in Delphi Foresight Research and Their Dependency on Delphi Survey Characteristics: A Simulation Study and Debate on Delphi Design and Interpretation.

PubMed

Birko, Stanislav; Dove, Edward S; Özdemir, Vural

2015-01-01

The extent of consensus (or the lack thereof) among experts in emerging fields of innovation can serve as antecedents of scientific, societal, investor and stakeholder synergy or conflict. Naturally, how we measure consensus is of great importance to science and technology strategic foresight. The Delphi methodology is a widely used anonymous survey technique to evaluate consensus among a panel of experts. Surprisingly, there is little guidance on how indices of consensus can be influenced by parameters of the Delphi survey itself. We simulated a classic three-round Delphi survey building on the concept of clustered consensus/dissensus. We evaluated three study characteristics that are pertinent for design of Delphi foresight research: (1) the number of survey questions, (2) the sample size, and (3) the extent to which experts conform to group opinion (the Group Conformity Index) in a Delphi study. Their impacts on the following nine Delphi consensus indices were then examined in 1000 simulations: Clustered Mode, Clustered Pairwise Agreement, Conger's Kappa, De Moivre index, Extremities Version of the Clustered Pairwise Agreement, Fleiss' Kappa, Mode, the Interquartile Range and Pairwise Agreement. The dependency of a consensus index on the Delphi survey characteristics was expressed from 0.000 (no dependency) to 1.000 (full dependency). The number of questions (range: 6 to 40) in a survey did not have a notable impact whereby the dependency values remained below 0.030. The variation in sample size (range: 6 to 50) displayed the top three impacts for the Interquartile Range, the Clustered Mode and the Mode (dependency = 0.396, 0.130, 0.116, respectively). The Group Conformity Index, a construct akin to measuring stubbornness/flexibility of experts' opinions, greatly impacted all nine Delphi consensus indices (dependency = 0.200 to 0.504), except the Extremity CPWA and the Interquartile Range that were impacted only beyond the first decimal point (dependency = 0.087 and 0.083, respectively). Scholars in technology design, foresight research and future(s) studies might consider these new findings in strategic planning of Delphi studies, for example, in rational choice of consensus indices and sample size, or accounting for confounding factors such as experts' variable degrees of conformity (stubbornness/flexibility) in modifying their opinions.

Evaluation of Nine Consensus Indices in Delphi Foresight Research and Their Dependency on Delphi Survey Characteristics: A Simulation Study and Debate on Delphi Design and Interpretation

PubMed Central

Birko, Stanislav; Dove, Edward S.; Özdemir, Vural

2015-01-01

The extent of consensus (or the lack thereof) among experts in emerging fields of innovation can serve as antecedents of scientific, societal, investor and stakeholder synergy or conflict. Naturally, how we measure consensus is of great importance to science and technology strategic foresight. The Delphi methodology is a widely used anonymous survey technique to evaluate consensus among a panel of experts. Surprisingly, there is little guidance on how indices of consensus can be influenced by parameters of the Delphi survey itself. We simulated a classic three-round Delphi survey building on the concept of clustered consensus/dissensus. We evaluated three study characteristics that are pertinent for design of Delphi foresight research: (1) the number of survey questions, (2) the sample size, and (3) the extent to which experts conform to group opinion (the Group Conformity Index) in a Delphi study. Their impacts on the following nine Delphi consensus indices were then examined in 1000 simulations: Clustered Mode, Clustered Pairwise Agreement, Conger’s Kappa, De Moivre index, Extremities Version of the Clustered Pairwise Agreement, Fleiss’ Kappa, Mode, the Interquartile Range and Pairwise Agreement. The dependency of a consensus index on the Delphi survey characteristics was expressed from 0.000 (no dependency) to 1.000 (full dependency). The number of questions (range: 6 to 40) in a survey did not have a notable impact whereby the dependency values remained below 0.030. The variation in sample size (range: 6 to 50) displayed the top three impacts for the Interquartile Range, the Clustered Mode and the Mode (dependency = 0.396, 0.130, 0.116, respectively). The Group Conformity Index, a construct akin to measuring stubbornness/flexibility of experts’ opinions, greatly impacted all nine Delphi consensus indices (dependency = 0.200 to 0.504), except the Extremity CPWA and the Interquartile Range that were impacted only beyond the first decimal point (dependency = 0.087 and 0.083, respectively). Scholars in technology design, foresight research and future(s) studies might consider these new findings in strategic planning of Delphi studies, for example, in rational choice of consensus indices and sample size, or accounting for confounding factors such as experts’ variable degrees of conformity (stubbornness/flexibility) in modifying their opinions. PMID:26270647

On the Asymptotic Relative Efficiency of Planned Missingness Designs.

PubMed

Rhemtulla, Mijke; Savalei, Victoria; Little, Todd D

2016-03-01

In planned missingness (PM) designs, certain data are set a priori to be missing. PM designs can increase validity and reduce cost; however, little is known about the loss of efficiency that accompanies these designs. The present paper compares PM designs to reduced sample (RN) designs that have the same total number of data points concentrated in fewer participants. In 4 studies, we consider models for both observed and latent variables, designs that do or do not include an "X set" of variables with complete data, and a full range of between- and within-set correlation values. All results are obtained using asymptotic relative efficiency formulas, and thus no data are generated; this novel approach allows us to examine whether PM designs have theoretical advantages over RN designs removing the impact of sampling error. Our primary findings are that (a) in manifest variable regression models, estimates of regression coefficients have much lower relative efficiency in PM designs as compared to RN designs, (b) relative efficiency of factor correlation or latent regression coefficient estimates is maximized when the indicators of each latent variable come from different sets, and (c) the addition of an X set improves efficiency in manifest variable regression models only for the parameters that directly involve the X-set variables, but it substantially improves efficiency of most parameters in latent variable models. We conclude that PM designs can be beneficial when the model of interest is a latent variable model; recommendations are made for how to optimize such a design.

An assessment of Lot Quality Assurance Sampling to evaluate malaria outcome indicators: extending malaria indicator surveys

PubMed Central

Biedron, Caitlin; Pagano, Marcello; Hedt, Bethany L; Kilian, Albert; Ratcliffe, Amy; Mabunda, Samuel; Valadez, Joseph J

2010-01-01

Background Large investments and increased global prioritization of malaria prevention and treatment have resulted in greater emphasis on programme monitoring and evaluation (M&E) in many countries. Many countries currently use large multistage cluster sample surveys to monitor malaria outcome indicators on a regional and national level. However, these surveys often mask local-level variability important to programme management. Lot Quality Assurance Sampling (LQAS) has played a valuable role for local-level programme M&E. If incorporated into these larger surveys, it would provide a comprehensive M&E plan at little, if any, extra cost. Methods The Mozambique Ministry of Health conducted a Malaria Indicator Survey (MIS) in June and July 2007. We applied LQAS classification rules to the 345 sampled enumeration areas to demonstrate identifying high- and low-performing areas with respect to two malaria program indicators—‘household possession of any bednet’ and ‘household possession of any insecticide-treated bednet (ITN)’. Results As shown by the MIS, no province in Mozambique achieved the 70% coverage target for household possession of bednets or ITNs. By applying LQAS classification rules to the data, we identify 266 of the 345 enumeration areas as having bednet coverage severely below the 70% target. An additional 73 were identified with low ITN coverage. Conclusions This article demonstrates the feasibility of integrating LQAS into multistage cluster sampling surveys and using these results to support a comprehensive national, regional and local programme M&E system. Furthermore, in the recommendations we outlined how to integrate the Large Country-LQAS design into macro-surveys while still obtaining results available through current sampling practices. PMID:20139435

Comparison of Microbial Communities in Swine Manure at Various Temperatures and storage times.

PubMed

Lim, Joung-Soo; Yang, Seung Hak; Kim, Bong-Soo; Lee, Eun Young

2018-01-26

This study was designed to investigate the effects of temperature and storage time on the evolution of bacterial communities in swine manure. Manure was stored at -20°C, 4°C, 20°C, or 37°C and sampled at 7-day intervals over 28 days of storage, for a total of 5 time points. To assess the bacterial species present, 16S ribosomal RNA gene sequences were analyzed using pyrosequencing. After normalization, 113,934 sequence reads were obtained, with an average length of 466.6 ± 4.4 bp. The diversity indices of the communities reduced as temperature and storage time increased, and the slopes of rarefaction curves decreased from the second week in samples stored at -20 °C and 4 °C. These results indicate that the richness of the bacterial community in the manure reduced as temperature and storage time increased. Firmicutes were the dominant phylum in all samples examined, ranging from 89.3% to 98.8% of total reads, followed by Actinobacteria, which accounted for 0.6% to 7.9%. A change in community composition was observed in samples stored at 37 °C during the first 7 days, indicating that temperature plays an important role in determining the microbiota of swine manure. Clostridium, Turicibacter, Streptococcus, and Lactobacillus within Firmicutes, and Corynebacterium within Actinobacteria were the most dominant genera in fresh manure and all stored samples. Based on our findings, we propose Clostridium as an indicator genus of swine manure decomposition in an anaerobic environment. The proportions of dominant genera changed in samples stored at 20 °C and 37 °C during the fourth week. Based on these results, it was concluded that the microbial communities of swine manure change rapidly as storage time and temperature increase.

Assessment of human exposure to pesticides by hair analysis: The case of vegetable-producing areas in Burkina Faso.

PubMed

Lehmann, Edouard; Oltramare, Christelle; Nfon Dibié, Jean-Jacques; Konaté, Yacouba; de Alencastro, Luiz Felippe

2018-02-01

The present work assesses human exposure to pesticides in vegetable-producing areas in Burkina Faso, using hair as an indicator. The study design includes a comparison between operators who are occupationally exposed while working in the fields and a reference population (i.e. not occupationally exposed) to evaluate both occupational and indirect exposures. Hair samples from volunteers (n=101) were positive for 17 pesticides (38 analyzed). Acetamiprid, desethylatrazine, carbofuran, and deltamethrin were detected for the first time in field samples. With a maximum of 9 residues per sample, pesticide exposure was ubiquitous in both populations. Contamination by acetamiprid, cypermethrin, and lambda-cyhalothrin (used in vegetable production) prevailed in operator samples. For other pesticides, such as imidacloprid and deltamethrin, no significant difference was found. This indicates a potentially large environmental exposure (dietary intake or atmospheric contamination) or the prevalence of other contamination sources. The present findings are concerning, as detected levels are globally higher than those previously reported, and indicate exposure to endocrine disrupting chemicals and probable carcinogens. Hair was found to be a suitable matrix for biomonitoring human exposure to pesticides and assessing dominant factors (i.e. sex, age, and protective equipment) in subgroups, as well as identifying geographical contamination patterns. Copyright © 2017 Elsevier Ltd. All rights reserved.

Quantification of the Flavonoid-Degrading Bacterium Eubacterium ramulus in Human Fecal Samples with a Species-Specific Oligonucleotide Hybridization Probe

PubMed Central

Simmering, Rainer; Kleessen, Brigitta; Blaut, Michael

1999-01-01

To investigate the occurrence of the flavonoid-degrading bacterium Eubacterium ramulus in the human intestinal tract, an oligonucleotide probe designated S-S-E.ram-0997-a-A-18 was designed and validated, with over 90 bacterial strains representing the dominant described human fecal flora. Application of S-S-E.ram-0997-a-A-18 to fecal samples from 20 subjects indicated the presence of E. ramulus in each individual tested in numbers from 4.4 × 107 to 2.0 × 109 cells/g of fecal dry mass. Six fecal E. ramulus isolates were recognized by S-S-E.ram-0997-a-A-18 but exhibited different band patterns when analyzed by randomly amplified polymorphic DNA. PMID:10427069

Considerations on sample holder design and custom-made non-polarizable electrodes for Spectral Induced Polarization measurements on unsaturated soils

NASA Astrophysics Data System (ADS)

Kaouane, C.; Chouteau, M. C.; Fauchard, C.; Cote, P.

2014-12-01

Spectral Induced Polarization (SIP) is a geophysical method sensitive to water content, saturation and grain size distribution. It could be used as an alternative to nuclear probes to assess the compaction of soils in road works. To evaluate the potential of SIP as a practical tool, we designed an experiment for complex conductivity measurements on unsaturated soil samples.Literature presents a large variety of sample holders and designs, each depending on the context. Although we might find some precise description about the sample holder, exact replication is not always possible. Furthermore, the potential measurements are often done using custom-made Ag/AgCl electrodes and very few indications are given on their reliability with time and temperature. Our objective is to perform complex conductivity measurements on soil samples compacted in a PVC cylindrical mould (10 cm-long, 5 cm-diameter) according to geotechnical standards. To expect homogeneous current density, electrical current is transmitted through the sample via chambers filled with agar gel. Agar gel is a good non-polarizable conductor within the frequency range (1 mHz -20kHz). Its electrical properties are slightly known. We measured increasing of agar-agar electrical conductivity in time. We modelled the influence of this variation on the measurement. If the electrodes are located on the sample, it is minimized. Because of the dimensions at stake and the need for simple design, potential electrodes are located outside the sample, hence the gel contributes to the measurements. Since the gel is fairly conductive, we expect to overestimate the sample conductivity. Potential electrodes are non-polarizable Ag/AgCl electrodes. To avoid any leakage, the KCl solution in the electrodes is replaced by saturated KCl-agar gel. These electrodes are low cost and show a low, stable, self-potential (<1mV). In addition, the technique of making electrode can be easily reproduced and storage and maintenance are simple. We measured a variation of less than 1 mS/m of the electrolyte conductivity during the time of measurement (~1h40) for a conductivity range 25-100 mS/m, showing no ionic contamination of the solution by the electrodes. An improvement to the cell design would be to control the internal temperature of the sample.

Shock Response of Commercial Purity Polycrystalline Magnesium Under Uniaxial Strain at Elevated Temperatures

NASA Astrophysics Data System (ADS)

Wang, Tianxue; Zuanetti, Bryan; Prakash, Vikas

2017-12-01

In the present paper, results of plate impact experiments designed to investigate the onset of incipient plasticity in commercial purity polycrystalline magnesium (99.9%) under weak uniaxial strain compression and elevated temperatures up to melt are presented. The dynamic stress at yield and post yield of magnesium, as inferred from the measured normal component of the particle velocity histories at the free (rear) surface of the target plate, are observed to decrease progressively with increasing test temperatures in the range from 23 to 500 °C. At (higher) test temperatures in the range 500-610 °C, the rate of decrease of dynamic stress with temperature at yield and post-yield in the sample is observed to weaken. At still higher test temperatures (617 and 630 °C), a dramatic increase in dynamic yield as well as flow stress is observed indicating a change in dominant mechanism of plastic deformation as the sample approaches the melt point of magnesium at strain rates of 105/s. In addition to these measurements at the wavefront, the plateau region of the free surface particle velocity profiles indicates that the longitudinal (plastic) impedance of the magnesium samples decreases continuously as the sample temperatures are increased from room to 610 °C, and then reverses trend (indicating increasing material longitudinal impedance/strength) as the sample temperatures are increased to 617 and 630 °C. Electron back scattered diffraction analysis of the as-received and annealed pre-test magnesium samples reveal grain coarsening as well as grain re-orientation to a different texture during the heating process of the samples.

Designing Intervention Studies: Selected Populations, Range Restrictions, and Statistical Power

PubMed Central

Miciak, Jeremy; Taylor, W. Pat; Stuebing, Karla K.; Fletcher, Jack M.; Vaughn, Sharon

2016-01-01

An appropriate estimate of statistical power is critical for the design of intervention studies. Although the inclusion of a pretest covariate in the test of the primary outcome can increase statistical power, samples selected on the basis of pretest performance may demonstrate range restriction on the selection measure and other correlated measures. This can result in attenuated pretest-posttest correlations, reducing the variance explained by the pretest covariate. We investigated the implications of two potential range restriction scenarios: direct truncation on a selection measure and indirect range restriction on correlated measures. Empirical and simulated data indicated direct range restriction on the pretest covariate greatly reduced statistical power and necessitated sample size increases of 82%–155% (dependent on selection criteria) to achieve equivalent statistical power to parameters with unrestricted samples. However, measures demonstrating indirect range restriction required much smaller sample size increases (32%–71%) under equivalent scenarios. Additional analyses manipulated the correlations between measures and pretest-posttest correlations to guide planning experiments. Results highlight the need to differentiate between selection measures and potential covariates and to investigate range restriction as a factor impacting statistical power. PMID:28479943

Designing Intervention Studies: Selected Populations, Range Restrictions, and Statistical Power.

PubMed

Miciak, Jeremy; Taylor, W Pat; Stuebing, Karla K; Fletcher, Jack M; Vaughn, Sharon

2016-01-01

An appropriate estimate of statistical power is critical for the design of intervention studies. Although the inclusion of a pretest covariate in the test of the primary outcome can increase statistical power, samples selected on the basis of pretest performance may demonstrate range restriction on the selection measure and other correlated measures. This can result in attenuated pretest-posttest correlations, reducing the variance explained by the pretest covariate. We investigated the implications of two potential range restriction scenarios: direct truncation on a selection measure and indirect range restriction on correlated measures. Empirical and simulated data indicated direct range restriction on the pretest covariate greatly reduced statistical power and necessitated sample size increases of 82%-155% (dependent on selection criteria) to achieve equivalent statistical power to parameters with unrestricted samples. However, measures demonstrating indirect range restriction required much smaller sample size increases (32%-71%) under equivalent scenarios. Additional analyses manipulated the correlations between measures and pretest-posttest correlations to guide planning experiments. Results highlight the need to differentiate between selection measures and potential covariates and to investigate range restriction as a factor impacting statistical power.

AN EVALUATION OF PRIMARY DATA-COLLECTION MODES IN AN ADDRESS-BASED SAMPLING DESIGN.

PubMed

Amaya, Ashley; Leclere, Felicia; Carris, Kari; Liao, Youlian

2015-01-01

As address-based sampling becomes increasingly popular for multimode surveys, researchers continue to refine data-collection best practices. While much work has been conducted to improve efficiency within a given mode, additional research is needed on how multimode designs can be optimized across modes. Previous research has not evaluated the consequences of mode sequencing on multimode mail and phone surveys, nor has significant research been conducted to evaluate mode sequencing on a variety of indicators beyond response rates. We conducted an experiment within the Racial and Ethnic Approaches to Community Health across the U.S. Risk Factor Survey (REACH U.S.) to evaluate two multimode case-flow designs: (1) phone followed by mail (phone-first) and (2) mail followed by phone (mail-first). We compared response rates, cost, timeliness, and data quality to identify differences across case-flow design. Because surveys often differ on the rarity of the target population, we also examined whether changes in the eligibility rate altered the choice of optimal case flow. Our results suggested that, on most metrics, the mail-first design was superior to the phone-first design. Compared with phone-first, mail-first achieved a higher yield rate at a lower cost with equivalent data quality. While the phone-first design initially achieved more interviews compared to the mail-first design, over time the mail-first design surpassed it and obtained the greatest number of interviews.

Evaluation of public and worker exposure due to naturally occurring asbestos in gravel discovered during a road construction project.

PubMed

Perkins, Robert A; Hargesheimer, John; Vaara, Leah

2008-09-01

During a repair and reconstruction project of an unpaved highway in a remote region of Alaska, workers discovered, after construction had commenced, that the materials used from a local material site contained asbestos (variously described as tremolite or actinolite). The regional geology indicated the presence of ultramafic rock, which often contains asbestos. Evaluation of asbestos exposure to workers, their equipment, and living quarters was required, as was the possible future exposure of workers and the general public to asbestos already used in the roadway construction. In addition, a decision was needed on whether to use materials from the contaminated site in the future. Of the almost 700 breathing zone air monitoring samples taken of the workers, 3% of the samples indicated exposures at or near 0.1 f/cc by the National Institute for Occupational Safety and Health (NIOSH) 7400 phase contrast microscopy (PCM) procedure. Thirty-six of the PCM samples underwent transmission electron microscopy (TEM) analysis by the NIOSH 7402 procedure, which indicated that about 40% of the fibers were asbestos. After classifying samples by tasks performed by workers, analysis indicated that workers, such as road grader operators who ground or spread materials, had the highest exposures. Also, monitoring results indicated motorist exposure to be much less than 0.1 f/cc. The design phase of any proposed construction project in regions that contain ultramafic rock must consider the possibility of amphibole contamination of roadway materials, and budget for exploration and asbestos analysis of likely materials sites.

De novo design of a four-fold symmetric TIM-barrel protein with atomic-level accuracy

PubMed Central

Parmeggiani, Fabio; Velasco, D. Alejandro Fernandez; Höcker, Birte; Baker, David

2015-01-01

Despite efforts for over 25 years, de novo protein design has not succeeded in achieving the TIM-barrel fold. Here we describe the computational design of 4-fold symmetrical (β/α)8-barrels guided by geometrical and chemical principles. Experimental characterization of 33 designs revealed the importance of sidechain-backbone hydrogen bonding for defining the strand register between repeat units. The X-ray crystal structure of a designed thermostable 184-residue protein is nearly identical with the designed TIM-barrel model. PSI-BLAST searches do not identify sequence similarities to known TIM-barrel proteins, and sensitive profile-profile searches indicate that the design sequence is distant from other naturally occurring TIM-barrel superfamilies, suggesting that Nature has only sampled a subset of the sequence space available to the TIM-barrel fold. The ability to de novo design TIM-barrels opens new possibilities for custom-made enzymes. PMID:26595462

Integrating public perspectives in sample return planning.

PubMed

Race, M S; MacGregor, D G

2000-01-01

Planning for extraterrestrial sample returns--whether from Mars or other solar system bodies--must be done in a way that integrates planetary protection concerns with the usual mission technical and scientific considerations. Understanding and addressing legitimate societal concerns about the possible risks of sample return will be a critical part of the public decision making process ahead. This paper presents the results of two studies, one with lay audiences, the other with expert microbiologists designed to gather information on attitudes and concerns about sample return risks and planetary protection. Focus group interviews with lay subjects, using generic information about Mars sample return and a preliminary environmental impact assessment, were designed to obtain an indication of how the factual content is perceived and understood by the public. A research survey of microbiologists gathered information on experts' views and attitudes about sample return, risk management approaches and space exploration risks. These findings, combined with earlier research results on risk perception, will be useful in identifying levels of concern and potential conflicts in understanding between experts and the public about sample return risks. The information will be helpful in guiding development of the environmental impact statement and also has applicability to proposals for sample return from other solar system bodies where scientific uncertainty about extraterrestrial life may persist at the time of mission planning. c2001 COSPAR Published by Elsevier Science Ltd. All rights reserved.

You are not always what we think you eat. Selective assimilation across multiple whole-stream isotopic tracer studies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dodds, W. K.; Collins, S. M.; Hamilton, S. K.

Analyses of 21 15N stable isotope tracer experiments, designed to examine food web dynamics in streams around the world, indicated that the isotopic composition of food resources assimilated by primary consumers (mostly invertebrates) poorly reflected the presumed food sources. Modeling indicated that consumers assimilated only 33–50% of the N available in sampled food sources such as decomposing leaves, epilithon, and fine particulate detritus over feeding periods of weeks or more. Thus, common methods of sampling food sources consumed by animals in streams do not sufficiently reflect the pool of N they assimilate. Lastly, Isotope tracer studies, combined with modeling andmore » food separation techniques, can improve estimation of N pools in food sources that are assimilated by consumers.« less

You are not always what we think you eat. Selective assimilation across multiple whole-stream isotopic tracer studies

DOE PAGES

Dodds, W. K.; Collins, S. M.; Hamilton, S. K.; ...

2014-10-01

Analyses of 21 15N stable isotope tracer experiments, designed to examine food web dynamics in streams around the world, indicated that the isotopic composition of food resources assimilated by primary consumers (mostly invertebrates) poorly reflected the presumed food sources. Modeling indicated that consumers assimilated only 33–50% of the N available in sampled food sources such as decomposing leaves, epilithon, and fine particulate detritus over feeding periods of weeks or more. Thus, common methods of sampling food sources consumed by animals in streams do not sufficiently reflect the pool of N they assimilate. Lastly, Isotope tracer studies, combined with modeling andmore » food separation techniques, can improve estimation of N pools in food sources that are assimilated by consumers.« less

Observation procedure, observer gender, and behavior valence as determinants of sampling error in a behavior assessment analogue

PubMed Central

Farkas, Gary M.; Tharp, Roland G.

1980-01-01

Several factors thought to influence the representativeness of behavioral assessment data were examined in an analogue study using a multifactorial design. Systematic and unsystematic methods of observing group behavior were investigated using 18 male and 18 female observers. Additionally, valence properties of the observed behaviors were inspected. Observers' assessments of a videotape were compared to a criterion code that defined the population of behaviors. Results indicated that systematic observation procedures were more accurate than unsystematic procedures, though this factor interacted with gender of observer and valence of behavior. Additionally, males tended to sample more representatively than females. A third finding indicated that the negatively valenced behavior was overestimated, whereas the neutral and positively valenced behaviors were accurately assessed. PMID:16795631

Apollo Experiment Report: Lunar-Sample Processing in the Lunar Receiving Laboratory High-Vacuum Complex

NASA Technical Reports Server (NTRS)

White, D. R.

1976-01-01

A high-vacuum complex composed of an atmospheric decontamination system, sample-processing chambers, storage chambers, and a transfer system was built to process and examine lunar material while maintaining quarantine status. Problems identified, equipment modifications, and procedure changes made for Apollo 11 and 12 sample processing are presented. The sample processing experiences indicate that only a few operating personnel are required to process the sample efficiently, safely, and rapidly in the high-vacuum complex. The high-vacuum complex was designed to handle the many contingencies, both quarantine and scientific, associated with handling an unknown entity such as the lunar sample. Lunar sample handling necessitated a complex system that could not respond rapidly to changing scientific requirements as the characteristics of the lunar sample were better defined. Although the complex successfully handled the processing of Apollo 11 and 12 lunar samples, the scientific requirement for vacuum samples was deleted after the Apollo 12 mission just as the vacuum system was reaching its full potential.

Cassette bacteria detection system. [for monitoring the sterility of regenerated water in spacecraft

NASA Technical Reports Server (NTRS)

1974-01-01

The design, fabrication, and testing of an automatic bacteria detection system, with a zero-g capability, based on the filter-capable approach, and intended for monitoring the sterility of regenerated water in spacecraft is discussed. The principle of detection is based on measuring the increase in chemiluminescence produced by the action of bacterial porphyrins on a luminol-hydrogen peroxide mixture. Viable organisms are detected by comparing the signal of an incubated water sample with an unincubated control. High signals for the incubated water sample indicate the presence of viable organisms.

Atomically designed precursors in optical fiber amplifiers: The thermal stability of the heterobimetallic ErAl3(OPri)12 in a solution-coated silica soot

NASA Astrophysics Data System (ADS)

Engholm, M.; Lashgari, K.; Edvardsson, S.; Westin, G.; Norin, L.

2005-06-01

The thermal stability of the bimetallic alkoxide ErAl3(OPri)12 doped in an unsintered silica (soot) has been investigated. Samples have been heated to different temperatures (up to 1500°C and analyzed by using ultraviolet-visible-near infrared absorption spectroscopy, infrared spectroscopy, scanning electron microscopy, energy dispersive spectroscopy, thermal gravimetric analysis, and powder x-ray diffraction. It is seen that the doped samples heated up to 1000°C show broad glasslike absorption spectra, indicating an amorphous structure, while the high-temperature sample shows an ordered crystallinelike structure with sharp characteristic absorption peaks. X-ray diffraction measurements indicate the formation of an ordered structure at temperatures of 1500°C, revealing a crystal phase of silica and phases of erbium and aluminosilicate. A comparison is also made with a sample doped with aqueous ErCl3 and Al(NO3)3. It is concluded that the local structure of the ErAl3 precursor is not preserved at temperatures above 1000°C. Alternative doping procedures are discussed.

Mode Equivalence of Health Indicators Between Data Collection Modes and Mixed-Mode Survey Designs in Population-Based Health Interview Surveys for Children and Adolescents: Methodological Study.

PubMed

Mauz, Elvira; Hoffmann, Robert; Houben, Robin; Krause, Laura; Kamtsiuris, Panagiotis; Gößwald, Antje

2018-03-05

The implementation of an Internet option in an existing public health interview survey using a mixed-mode design is attractive because of lower costs and faster data availability. Additionally, mixed-mode surveys can increase response rates and improve sample composition. However, mixed-mode designs can increase the risk of measurement error (mode effects). This study aimed to determine whether the prevalence rates or mean values of self- and parent-reported health indicators for children and adolescents aged 0-17 years differ between self-administered paper-based questionnaires (SAQ-paper) and self-administered Web-based questionnaires (SAQ-Web), as well as between a single-mode control group and different mixed-mode groups. Data were collected for a methodological pilot of the third wave of the "German Health Interview and Examination Survey for Children and Adolescents". Questionnaires were completed by parents or adolescents. A population-based sample of 11,140 children and adolescents aged 0-17 years was randomly allocated to 4 survey designs-a single-mode control group with paper-and-pencil questionnaires only (n=970 parents, n=343 adolescents)-and 3 mixed-mode designs, all of which offered Web-based questionnaire options. In the concurrent mixed-mode design, both questionnaires were offered at the same time (n=946 parents, n=290 adolescents); in the sequential mixed-mode design, the SAQ-Web was sent first, followed by the paper questionnaire along with a reminder (n=854 parents, n=269 adolescents); and in the preselect mixed-mode design, both options were offered and the respondents were asked to request the desired type of questionnaire (n=698 parents, n=292 adolescents). In total, 3468 questionnaires of parents of children aged 0-17 years (SAQ-Web: n=708; SAQ-paper: n=2760) and 1194 questionnaires of adolescents aged 11-17 years (SAQ-Web: n=299; SAQ-paper: n=895) were analyzed. Sociodemographic characteristics and a broad range of health indicators for children and adolescents were compared by survey design and data collection mode by calculating predictive margins from regression models. There were no statistically significant differences in sociodemographic characteristics or health indicators between the single-mode control group and any of the mixed-mode survey designs. Differences in sociodemographic characteristics between SAQ-Web and SAQ-paper were found. Web respondents were more likely to be male, have higher levels of education, and higher household income compared with paper respondents. After adjusting for sociodemographic characteristics, only one of the 38 analyzed health indicators showed different prevalence rates between the data collection modes, with a higher prevalence rate for lifetime alcohol consumption among the online-responding adolescents (P<.001). These results suggest that mode bias is limited in health interview surveys for children and adolescents using a mixed-mode design with Web-based and paper questionnaires. ©Elvira Mauz, Robert Hoffmann, Robin Houben, Laura Krause, Panagiotis Kamtsiuris, Antje Gößwald. Originally published in the Journal of Medical Internet Research (http://www.jmir.org), 05.03.2018.

Seasonal and temporal variation in release of antibiotics in hospital wastewater: estimation using continuous and grab sampling.

PubMed

Diwan, Vishal; Stålsby Lundborg, Cecilia; Tamhankar, Ashok J

2013-01-01

The presence of antibiotics in the environment and their subsequent impact on resistance development has raised concerns globally. Hospitals are a major source of antibiotics released into the environment. To reduce these residues, research to improve knowledge of the dynamics of antibiotic release from hospitals is essential. Therefore, we undertook a study to estimate seasonal and temporal variation in antibiotic release from two hospitals in India over a period of two years. For this, 6 sampling sessions of 24 hours each were conducted in the three prominent seasons of India, at all wastewater outlets of the two hospitals, using continuous and grab sampling methods. An in-house wastewater sampler was designed for continuous sampling. Eight antibiotics from four major antibiotic groups were selected for the study. To understand the temporal pattern of antibiotic release, each of the 24-hour sessions were divided in three sub-sampling sessions of 8 hours each. Solid phase extraction followed by liquid chromatography/tandem mass spectrometry (LC-MS/MS) was used to determine the antibiotic residues. Six of the eight antibiotics studied were detected in the wastewater samples. Both continuous and grab sampling methods indicated that the highest quantities of fluoroquinolones were released in winter followed by the rainy season and the summer. No temporal pattern in antibiotic release was detected. In general, in a common timeframe, continuous sampling showed less concentration of antibiotics in wastewater as compared to grab sampling. It is suggested that continuous sampling should be the method of choice as grab sampling gives erroneous results, it being indicative of the quantities of antibiotics present in wastewater only at the time of sampling. Based on our studies, calculations indicate that from hospitals in India, an estimated 89, 1 and 25 ng/L/day of fluroquinolones, metronidazole and sulfamethoxazole respectively, might be getting released into the environment per 100 hospital beds.

Using Wheelchair Sports to Complement Disability Awareness Curriculum among College Students

ERIC Educational Resources Information Center

Lundberg, Neil R.; Zabriskie, Ramon B.; Smith, Kevin M.; Barney, Keith W.

2008-01-01

The purpose of this study was to examine the effects of a campus-wide intramural wheelchair sports program on attitudes toward people with disabilities. The sample consisted of 126 participants at a large, western university. A quasi-experimental pre-post design was used. Results indicated that there was a significant decrease in discomfort in…

Predictors of Academic Performance of Seminarians in Catholic Major Seminaries in the South-West Region of Nigeria

ERIC Educational Resources Information Center

Adubale, Andrew A.; Aluede, Oyaziwo

2014-01-01

This study investigated predictors of seminarians' academic performance. The study employed a correlational research design. Two hundred and thirty two seminarians constituted the sample for the study. Bakare's modified version of student problem inventory was used to collect the data of the study. The findings indicated that time management and…

Consistent indicators and methods and a scalable sample design to meet assessment, inventory, and monitoring information needs across scales

USDA-ARS?s Scientific Manuscript database

Within the Bureau of Land Management (BLM), as in many land management agencies throughout the world, much effort is invested in monitoring and assessment for specific management needs. The BLM Assessment, Inventory, and Monitoring (AIM) Strategy was initiated, in part, to evaluate and make recommen...

Examination of Cognitive and Instrumental Functional Performance as Indicators for Driving Cessation Risk across 3 Years

ERIC Educational Resources Information Center

Ackerman, Michelle L.; Edwards, Jerri D.; Ross, Lesley A.; Ball, Karlene K.; Lunsman, Melissa

2008-01-01

Purpose: The purpose of this study was to prospectively examine the role of cognitive and instrumental functional performance in driving cessation while simultaneously accounting for any contributions of demographics, vision, physical performance, and health among a sample of older adults without dementia. Design and Methods: Included in the…

Effects of Literature-Based Reading Instruction of the Reading Achievement of Hispanic First-Grade Students.

ERIC Educational Resources Information Center

Carrasco, Miguel A.

A study investigated the effects of the literature-based reading instruction on the reading achievement of Mexican-American first graders in Spanish. Using a posttest-only control group design and "t" test for independent samples, results indicated that after three months the experimental group of 30 students (attending a 100% Hispanic…

Mobile Phone Applications in the University Classroom: Perceptions of Undergraduate Students in Jordan

ERIC Educational Resources Information Center

Ashour, Rateb; Alzghool, Haneen; Iyadat, Yousef; Abu-Alruz, Jamal

2012-01-01

The primary purpose of this study is to determine the level of mobile phone applications in university classrooms in Jordan. A sample of 313 undergraduate students participated in the study by completing the researchers' designed questionnaire, which is composed of 13 items. The results of the study indicate that participants perceived a high…

Records of Backcountry Use Can Assist Trail Managers

Treesearch

H.J. Plumley; H.T. Peet; R.E. Leonard

1978-01-01

Records of recreational use of Eastern backcountry areas have not been systematically kept by many trail management groups in the past. Decisions on backcountry site designs and facilities should not be made without information on visitor use and behavior. An analysis of sample data from records of overnight shelter use on the Long Trail, Vermont, indicates how such...

The Impact of Financial Literacy Education on Subsequent Financial Behavior

ERIC Educational Resources Information Center

Mandell, Lewis; Klein, Linda Schmid

2009-01-01

This study examined the differential impact on 79 high school students of a personal financial management course completed 1 to 4 years earlier. This study used a matched sample design based on a school system's records to identify students who had and had not taken a course in personal financial management. The findings indicated that those who…

Examining Factors Contributing to Indiscipline in Primary Schools in Nyeri Central Sub-County, Kenya

ERIC Educational Resources Information Center

Kagoiya, Patrick; Kagema, Njogu

2018-01-01

School discipline is a core indicator of school effectiveness. Learner management is crucial and educational researchers need to focus on factors leading to indiscipline in schools. Guided by Planned Behaviour Theory that explores on guidance, counseling and good classroom management the study used the survey research design to sample 91 teachers…

Distributed Leadership and School Effectiveness in Egypt and Oman: An Exploratory Study

ERIC Educational Resources Information Center

Al-Harthi, Aisha Salim Ali; Al-Mahdy, Yasser F. Hendawy

2017-01-01

Purpose: The purpose of this study is to examine teachers' perceptions of the levels of distributed leadership (DL) practices and the indicators of school effectiveness (SE) in Egypt and Oman. It also investigated the role of accreditation on these perceptions. Design/methodology/approach: The study sampled 635 teachers in Egypt and Oman using the…

Detection of a Novel Porcine Parvovirus in Chinese Swine Herds

USDA-ARS?s Scientific Manuscript database

To determine whether the recently reported novel porcine parvovirus type 4 (PPV4) is prevalent in China, a set of PPV4 specific primers were designed and used for the molecular survey of PPV4 among clinical samples. The results indicated a positive detection for PPV4 in Chinese swine herds of 1.84% ...

Water-quality trend analysis and sampling design for streams in North Dakota, 1971-2000

USGS Publications Warehouse

Vecchia, Aldo V.

2003-01-01

This report presents the results of a study conducted by the U.S. Geological Survey, in cooperation with the North Dakota Department of Health, to analyze historical water-quality trends in selected dissolved major ions, nutrients, and dissolved trace metals for 10 streams in southwestern and eastern North Dakota and to develop an efficient sampling design to monitor future water-quality trends. A time-series model for daily streamflow and constituent concentration was used to identify significant concentration trends, separate natural hydroclimatic variability in concentration from variability that could have resulted from anthropogenic causes, and evaluate various sampling designs to monitor future water-quality trends. The interannual variability in concentration as a result of variability in streamflow, referred to as the annual concentration anomaly, generally was high for all constituents and streams used in the trend analysis and was particularly sensitive to the severe drought that occurred in the late 1980's and the very wet period that began in 1993 and has persisted to the present (2002). Although climatic conditions were similar across North Dakota during the trend-analysis period (1971-2000), significant differences occurred in the annual concentration anomalies from constituent to constituent and location to location, especially during the drought and the wet period. Numerous trends were detected in the historical constituent concentrations after the annual concentration anomalies were removed. The trends within each of the constituent groups (major ions, nutrients, and trace metals) showed general agreement among the streams. For most locations, the largest dissolved major-ion concentrations occurred during the late 1970's and concentrations in the mid- to late 1990's were smaller than concentrations during the late 1970's. However, the largest concentrations for three of the Missouri River tributaries and one of the Red River of the North tributaries occurred during the mid- to late 1990's. Concentration trends for total ammonia plus organic nitrogen showed close agreement among the streams for which that constituent was evaluated. The largest concentrations occurred during the early 1980's, and the smallest concentrations occurred during the early 1990's. Nutrient data were not available for the early 1970's or late 1990's. Although a detailed analysis of the causes of the trends was beyond the scope of this report, a preliminary analysis of cropland, livestock-inventory, and oil-production data for 1971-2000 indicated the concentration trends may be related to the livestock-inventory and oil-production activities in the basins. Dissolved iron and manganese concentrations for the southwestern North Dakota streams generally remained stable during 1971-2000. However, many of the recorded concentrations for those streams were less than the detection limit, and trends that were masked by censoring may have occurred. Several significant trends were detected in dissolved iron and manganese concentrations for the eastern North Dakota streams. Concentrations for those streams either remained stable or increased during most of the 1970's and then decreased rapidly for about 2 years beginning in the late 1970's. The concentrations were relatively stable from the early 1980's to 2000 except at two locations where dissolved iron concentrations increased during the early 1990's. The most efficient overall sampling designs for the detection of annual trends (that is, trends that occur uniformly during the entire year) consisted of balanced designs in which the sampling dates and the number of samples collected remained fixed from year to year and in which the samples were collected throughout the year rather than in a short timespan. The best overall design for the detection of annual trends consisted of three samples per year, with samples collected near the beginning of December, April, and August. That design had acceptable sensitivity for the detection of trends in most constituents at all locations. Little improvement in sensitivity was achieved by collecting more than three samples per year.The sampling designs that were first evaluated for annual trends also were evaluated with regard to their sensitivity to detect seasonal trends that occurred during three seasons--April through August, August through December, and December through April. Design results indicated that an average of one extra sample per station per year resulted in an efficient design for detecting seasonal trends. However, allocation of the extra samples varied depending on the station, month, and constituent group (major ions, nutrients, and trace metals).

Detection of reticuloendotheliosis virus as a contaminant of fowl pox vaccines.

PubMed

Awad, A M; Abd El-Hamid, H S; Abou Rawash, A A; Ibrahim, H H

2010-11-01

This study was designed to detect reticuloendotheliosis virus (REV) as a contaminant in fowl pox vaccines. A total of 30 fowl pox vaccine samples were examined for the presence of REV using both in vitro and in vivo methods. In in vitro testing, the fowl pox vaccine samples were inoculated into chicken embryo fibroblast cultures prepared from specific-pathogen-free embryonated chicken eggs, and the cultures were examined using PCR to detect REV. In in vivo testing, each fowl pox vaccine sample was inoculated into 5-d-old specific-pathogen-free chicks, which were kept under observation for up to 12 wk postinoculation; serum samples were collected at 15, 30, and 45 d postinoculation for the detection of REV-specific antibodies using ELISA. Tissue samples were collected at 8 and 12 wk postinoculation for histopathological examination. Of the tested vaccines, only one imported vaccine sample tested positive for REV using PCR. Serum samples collected from chicks infected with the PCR-positive vaccine batch also tested positive for REV-specific antibodies using ELISA. Histopathological examination of the liver, spleen, and bursa of Fabricius demonstrated the presence of tumor cells in these organs, confirming the results obtained using PCR and ELISA, and indicating that the sample was contaminated with REV. These data clearly indicate that the screening of all commercial poultry vaccines for viruses is an important factor in assuring the biosafety of animal vaccines.

Application of self-organizing feature maps to analyze the relationships between ignitable liquids and selected mass spectral ions.

PubMed

Frisch-Daiello, Jessica L; Williams, Mary R; Waddell, Erin E; Sigman, Michael E

2014-03-01

The unsupervised artificial neural networks method of self-organizing feature maps (SOFMs) is applied to spectral data of ignitable liquids to visualize the grouping of similar ignitable liquids with respect to their American Society for Testing and Materials (ASTM) class designations and to determine the ions associated with each group. The spectral data consists of extracted ion spectra (EIS), defined as the time-averaged mass spectrum across the chromatographic profile for select ions, where the selected ions are a subset of ions from Table 2 of the ASTM standard E1618-11. Utilization of the EIS allows for inter-laboratory comparisons without the concern of retention time shifts. The trained SOFM demonstrates clustering of the ignitable liquid samples according to designated ASTM classes. The EIS of select samples designated as miscellaneous or oxygenated as well as ignitable liquid residues from fire debris samples are projected onto the SOFM. The results indicate the similarities and differences between the variables of the newly projected data compared to those of the data used to train the SOFM. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Design and Analysis of an Isokinetic Sampling Probe for Submicron Particle Measurements at High Altitude

NASA Technical Reports Server (NTRS)

Heath, Christopher M.

2012-01-01

An isokinetic dilution probe has been designed with the aid of computational fluid dynamics to sample sub-micron particles emitted from aviation combustion sources. The intended operational range includes standard day atmospheric conditions up to 40,000-ft. With dry nitrogen as the diluent, the probe is intended to minimize losses from particle microphysics and transport while rapidly quenching chemical kinetics. Initial results indicate that the Mach number ratio of the aerosol sample and dilution streams in the mixing region is an important factor for successful operation. Flow rate through the probe tip was found to be highly sensitive to the static pressure at the probe exit. Particle losses through the system were estimated to be on the order of 50% with minimal change in the overall particle size distribution apparent. Following design refinement, experimental testing and validation will be conducted in the Particle Aerosol Laboratory, a research facility located at the NASA Glenn Research Center to study the evolution of aviation emissions at lower stratospheric conditions. Particle size distributions and number densities from various combustion sources will be used to better understand particle-phase microphysics, plume chemistry, evolution to cirrus, and environmental impacts of aviation.

Comparing population size estimators for plethodontid salamanders

USGS Publications Warehouse

Bailey, L.L.; Simons, T.R.; Pollock, K.H.

2004-01-01

Despite concern over amphibian declines, few studies estimate absolute abundances because of logistic and economic constraints and previously poor estimator performance. Two estimation approaches recommended for amphibian studies are mark-recapture and depletion (or removal) sampling. We compared abundance estimation via various mark-recapture and depletion methods, using data from a three-year study of terrestrial salamanders in Great Smoky Mountains National Park. Our results indicate that short-term closed-population, robust design, and depletion methods estimate surface population of salamanders (i.e., those near the surface and available for capture during a given sampling occasion). In longer duration studies, temporary emigration violates assumptions of both open- and closed-population mark-recapture estimation models. However, if the temporary emigration is completely random, these models should yield unbiased estimates of the total population (superpopulation) of salamanders in the sampled area. We recommend using Pollock's robust design in mark-recapture studies because of its flexibility to incorporate variation in capture probabilities and to estimate temporary emigration probabilities.

Omasal sampling technique for assessing fermentative digestion in the forestomach of dairy cows.

PubMed

Huhtanen, P; Brotz, P G; Satter, L D

1997-05-01

A procedure allowing digesta sampling from the omasum via a ruminal cannula without repeated entry into the omasum was developed. The sampling system consisted of a device inserted into the omasum via the ruminal cannula, a tube connecting the device to the ruminal cannula, and a single compressor/vacuum pump. Eight cows given ad libitum access to a total mixed diet were used in a crossover design to evaluate the effects of the sampling system on digestive activity, animal performance, and animal behavior. Results indicated that the omasal sampling system has minimal effect on normal digestive and productive functions of high-producing dairy cows. Dry matter intake was reduced (24.0 vs 21.8 kg/d; P < .02) and seemed related more to the sampling procedures than to the device in the omasum. Observations of animal behavior indicated that cows with the sampling device were similar to control cows, although rumination and total chewing times were reduced slightly. The composition of digesta samples was biased toward an over-abundance of the liquid phase, but using a double-marker system to calculate digesta flow resulted in fairly small coefficients of variation for measurements of ruminal digestion variables. This technique may prove useful for partitioning digestion between the fermentative portion of the forestomach and the lower gastrointestinal tract. The omasal sampling procedure requires less surgical intervention than the traditional methods using abomasal or duodenal cannulas as sampling sites to study forestomach digestion and avoids potentially confounding endogenous secretions of the abomasum.

Characteristics of suspended and streambed sediment within constructed chutes and the main channel at Upper Hamburg and Glovers Point Bends, Missouri River, Nebraska, 2008

USGS Publications Warehouse

Woodward, Brenda K.; Rus, David L.

2011-01-01

The U.S. Army Corps of Engineers, Omaha District, as part of the Missouri River Bank Stabilization and Navigation Mitigation Project, has constructed 17 off-channel chutes along the channelized Missouri River, downstream from Sioux City, Iowa, to increase habitat diversity. To better understand characteristics of suspended and streambed sediment within these constructed chutes, the U.S. Geological Survey investigated specific aspects of chute design and function in relation to sediment characteristics including: (1) effects of inlet structures; (2) changes occurring between the inlet and the outlet of a chute; (3) effects of chutes on sediment characteristics in the main channel; and (4) differences in chute dynamics between sampled chutes. Two chutes differing in design, location, and dynamics were studied, Upper Hamburg Bend near Nebraska City, Nebr., and Glovers Point Bend near Winnebago, Nebr. Each site was characterized using five or more sampling transects (two in the chute and three to four in the main channel) designed to bracket sediment exchanges between chutes and the main channel. A sixth transect was included at the Upper Hamburg Bend study site to account for the effects of a nontarget chute having its inlet midway between the inlet and outlet of the primary chute. Representative samples of suspended and streambed sediment were collected at each transect, along with measurements of turbidity and streamflow, between June and November 2008. Four sets of samples were collected at the Glovers Point Bend study site and five sample sets were collected from the Upper Hamburg Bend study site. Results from paired t-tests and standard t-tests indicated that the inlet structure design, passing inflow only from the top of the main-channel water column, reduced the supply of coarse-grained suspended sediment entering the chutes. Statistical comparisons did not indicate differences between the inlet and outlet of either chute; however, anecdotal evidence of recent bank erosion and in-channel deposition was observed in both chutes during the study period. Chutes had little effect on Missouri River main-channel sediment characteristics, which could be explained by the much greater streamflow of the main channel. Between-chute comparisons showed no significant differences in the suspended-sediment characteristics; however, the Upper Hamburg Bend chute had a coarser streambed, wider channel, and much greater streamflow than did the Glovers Point Bend chute.

Income Transfers and Maternal Health: Evidence from a National Randomized Social Cash Transfer Program in Zambia.

PubMed

Handa, Sudhanshu; Peterman, Amber; Seidenfeld, David; Tembo, Gelson

2016-02-01

There is promising recent evidence that poverty-targeted social cash transfers have potential to improve maternal health outcomes; however, questions remain surrounding design features responsible for impacts. In addition, virtually no evidence exists from the African region. This study explores the impact of Zambia's Child Grant Program on a range of maternal health utilization outcomes using a randomized design and difference-in-differences multivariate regression from data collected over 24 months from 2010 to 2012. Results indicate that while there are no measurable program impacts among the main sample, there are heterogeneous impacts on skilled attendance at birth among a sample of women residing in households having better access to maternal health services. The latter result is particularly interesting because of the overall low level of health care availability in program areas suggesting that dedicated program design or matching supply-side interventions may be necessary to leverage unconditional cash transfers in similar settings to impact maternal health. Copyright © 2015 John Wiley & Sons, Ltd.

Income transfers and maternal health: Evidence from a national randomized social cash transfer program in Zambia

PubMed Central

Handa, Sudhanshu; Peterman, Amber; Seidenfeld, David; Tembo, Gelson

2017-01-01

There is promising recent evidence that poverty-targeted social cash transfers have potential to improve maternal health outcomes, however questions remain surrounding design features responsible for impacts. In addition, virtually no evidence exists from the African region. This study explores the impact of Zambia’s Child Grant Program on a range of maternal health utilization outcomes using a randomized design and difference-in-differences multivariate regression from data collected over 24 months from 2010 to 2012. Results indicate that while there are no measurable program impacts among the main sample, there are heterogeneous impacts on skilled attendance at birth among a sample of women residing in households having better access to maternal health services. The latter result is particularly interesting because of the overall low level of healthcare availability in program areas suggesting dedicated program design or matching supply-side interventions may be necessary to leverage unconditional cash transfers in similar settings to impact maternal health. PMID:25581062

Well installation, single-well testing, and particle-size analysis for selected sites in and near the Lost Creek Designated Ground Water Basin, north-central Colorado, 2003-2004

USGS Publications Warehouse

Beck, Jennifer A.; Paschke, Suzanne S.; Arnold, L. Rick

2011-01-01

This report describes results from a groundwater data-collection program completed in 2003-2004 by the U.S. Geological Survey in support of the South Platte Decision Support System and in cooperation with the Colorado Water Conservation Board. Two monitoring wells were installed adjacent to existing water-table monitoring wells. These wells were installed as well pairs with existing wells to characterize the hydraulic properties of the alluvial aquifer and shallow Denver Formation sandstone aquifer in and near the Lost Creek Designated Ground Water Basin. Single-well tests were performed in the 2 newly installed wells and 12 selected existing monitoring wells. Sediment particle size was analyzed for samples collected from the screened interval depths of each of the 14 wells. Hydraulic-conductivity and transmissivity values were calculated after the completion of single-well tests on each of the selected wells. Recovering water-level data from the single-well tests were analyzed using the Bouwer and Rice method because test data most closely resembled those obtained from traditional slug tests. Results from the single-well test analyses for the alluvial aquifer indicate a median hydraulic-conductivity value of 3.8 x 10-5 feet per second and geometric mean hydraulic-conductivity value of 3.4 x 10-5 feet per second. Median and geometric mean transmissivity values in the alluvial aquifer were 8.6 x 10-4 feet squared per second and 4.9 x 10-4 feet squared per second, respectively. Single-well test results for the shallow Denver Formation sandstone aquifer indicate a median hydraulic-conductivity value of 5.4 x 10-6 feet per second and geometric mean value of 4.9 x 10-6 feet per second. Median and geometric mean transmissivity values for the shallow Denver Formation sandstone aquifer were 4.0 x 10-5 feet squared per second and 5.9 x 10-5 feet squared per second, respectively. Hydraulic-conductivity values for the alluvial aquifer in and near the Lost Creek Designated Ground Water Basin generally were greater than hydraulic-conductivity values for the Denver Formation sandstone aquifer and less than hydraulic-conductivity values for the alluvial aquifer along the main stem of the South Platte River Basin reported by previous studies. Particle sizes were analyzed for a total of 14 samples of material representative of the screened interval in each of the 14 wells tested in this study. Of the 14 samples collected, 8 samples represent the alluvial aquifer and 6 samples represent the Denver Formation sandstone aquifer in and near the Lost Creek Designated Ground Water Basin. The sampled alluvial aquifer material generally contained a greater percentage of large particles (larger than 0.5 mm) than the sampled sandstone aquifer material. Alternatively, the sampled sandstone aquifer material generally contained a greater percentage of fine particles (smaller than 0.5 mm) than the sampled alluvial aquifer material consistent with the finding that the alluvial aquifer is more conductive than the sandstone aquifer in the vicinity of the Lost Creek Designated Ground Water Basin.

Estuarine water quality in parks of the Northeast Coastal and Barrier Network: Development and early implementation of vital signs estuarine nutrient-enrichment monitoring, 2003-06

USGS Publications Warehouse

Kopp, Blaine S.; Nielsen, Martha; Glisic, Dejan; Neckles, Hilary A.

2009-01-01

This report documents results of pilot tests of a protocol for monitoring estuarine nutrient enrichment for the Vital Signs Monitoring Program of the National Park Service Northeast Coastal and Barrier Network. Data collected from four parks during protocol development in 2003-06 are presented: Gateway National Recreation Area, Colonial National Historic Park, Fire Island National Seashore, and Assateague Island National Seashore. The monitoring approach incorporates several spatial and temporal designs to address questions at a hierarchy of scales. Indicators of estuarine response to nutrient enrichment were sampled using a probability design within park estuaries during a late-summer index period. Monitoring variables consisted of dissolved-oxygen concentration, chlorophyll a concentration, water temperature, salinity, attenuation of downwelling photosynthetically available radiation (PAR), and turbidity. The statistical sampling design allowed the condition of unsampled locations to be inferred from the distribution of data from a set of randomly positioned "probability" stations. A subset of sampling stations was sampled repeatedly during the index period, and stations were not rerandomized in subsequent years. These "trend stations" allowed us to examine temporal variability within the index period, and to improve the sensitivity of the monitoring protocol to detecting change through time. Additionally, one index site in each park was equipped for continuous monitoring throughout the index period. Thus, the protocol includes elements of probabilistic and targeted spatial sampling, and the temporal intensity ranges from snapshot assessments to continuous monitoring.

Indicator organisms in meat and poultry slaughter operations: their potential use in process control and the role of emerging technologies.

PubMed

Saini, Parmesh K; Marks, Harry M; Dreyfuss, Moshe S; Evans, Peter; Cook, L Victor; Dessai, Uday

2011-08-01

Measuring commonly occurring, nonpathogenic organisms on poultry products may be used for designing statistical process control systems that could result in reductions of pathogen levels. The extent of pathogen level reduction that could be obtained from actions resulting from monitoring these measurements over time depends upon the degree of understanding cause-effect relationships between processing variables, selected output variables, and pathogens. For such measurements to be effective for controlling or improving processing to some capability level within the statistical process control context, sufficiently frequent measurements would be needed to help identify processing deficiencies. Ultimately the correct balance of sampling and resources is determined by those characteristics of deficient processing that are important to identify. We recommend strategies that emphasize flexibility, depending upon sampling objectives. Coupling the measurement of levels of indicator organisms with practical emerging technologies and suitable on-site platforms that decrease the time between sample collections and interpreting results would enhance monitoring process control.

Rethinking indicators of microbial drinking water quality for health studies in tropical developing countries: case study in northern coastal Ecuador.

PubMed

Levy, Karen; Nelson, Kara L; Hubbard, Alan; Eisenberg, Joseph N S

2012-03-01

To address the problem of the health impacts of unsafe drinking water, methods are needed to assess microbiologic contamination in water. However, indicators of water quality have provided mixed results. We evaluate five assays (three for Escherichia coli and one each for enterococci and somatic coliphage) of microbial contamination in villages in rural Ecuador that rely mostly on untreated drinking water. Only membrane filtration for E. coli using mI agar detected a significant association with household diarrheal disease outcome (odds ratio = 1.29, 95% confidence interval = 1.02-1.65 in household containers and odds ratio = 1.18, 95% confidence interval = 1.02-1.37) in source samples. Our analysis and other published research points to the need for further consideration of study design factors, such as sample size and variability in measurements, when using indicator organisms, especially when relating water quality exposure to health outcomes. Although indicator organisms are used extensively in health studies, we argue that their use requires a full understanding of their purposes and limitations.

Rethinking Indicators of Microbial Drinking Water Quality for Health Studies in Tropical Developing Countries: Case Study in Northern Coastal Ecuador

PubMed Central

Levy, Karen; Nelson, Kara L.; Hubbard, Alan; Eisenberg, Joseph N. S.

2012-01-01

To address the problem of the health impacts of unsafe drinking water, methods are needed to assess microbiologic contamination in water. However, indicators of water quality have provided mixed results. We evaluate five assays (three for Escherichia coli and one each for enterococci and somatic coliphage) of microbial contamination in villages in rural Ecuador that rely mostly on untreated drinking water. Only membrane filtration for E. coli using mI agar detected a significant association with household diarrheal disease outcome (odds ratio = 1.29, 95% confidence interval = 1.02–1.65 in household containers and odds ratio = 1.18, 95% confidence interval = 1.02–1.37) in source samples. Our analysis and other published research points to the need for further consideration of study design factors, such as sample size and variability in measurements, when using indicator organisms, especially when relating water quality exposure to health outcomes. Although indicator organisms are used extensively in health studies, we argue that their use requires a full understanding of their purposes and limitations. PMID:22403326

Are two systemic fish assemblage sampling programmes on the upper Mississippi River telling us the same thing?

USGS Publications Warehouse

Dukerschein, J.T.; Bartels, A.D.; Ickes, B.S.; Pearson, M.S.

2013-01-01

We applied an Index of Biotic Integrity (IBI) used on Wisconsin/Minnesota waters of the upper Mississippi River (UMR) to compare data from two systemic sampling programmes. Ability to use data from multiple sampling programmes could extend spatial and temporal coverage of river assessment and monitoring efforts. We normalized for effort and tested fish community data collected by the Environmental Monitoring and Assessment Program-Great Rivers Ecosystems (EMAP-GRE) 2004–2006 and the Long Term Resource Monitoring Program (LTRMP) 1993–2006. Each programme used daytime electrofishing along main channel borders but with some methodological and design differences. EMAP-GRE, designed for baseline and, eventually, compliance monitoring, used a probabilistic, continuous design. LTRMP, designed primarily for baseline and trend monitoring, used a stratified random design in five discrete study reaches. Analysis of similarity indicated no significant difference between EMAP-GRE and LTRMP IBI scores (n=238; Global R= 0.052; significance level=0.972). Both datasets distinguished clear differences only between 'Fair' and 'Poor' condition categories, potentially supporting a 'pass–fail' assessment strategy. Thirteen years of LTRMP data demonstrated stable IBI scores through time in four of five reaches sampled. LTRMP and EMAPGRE IBI scores correlated along the UMR's upstream to downstream gradient (df [3, 25]; F=1.61; p=0.22). A decline in IBI scores from upstream to downstream was consistent with UMR fish community studies and a previous, empirically modelled human disturbance gradient. Comparability between EMAP-GRE (best upstream to downstream coverage) and LTRMP data (best coverage over time and across the floodplain) supports a next step of developing and testing a systemic, multi-metric fish index on the UMR that both approaches could inform.

Clio: An Autonomous Vertical Sampling Vehicle for Global Ocean Biogeochemical Mapping

NASA Astrophysics Data System (ADS)

Jakuba, M.; Gomez-Ibanez, D.; Saito, M. A.; Dick, G.; Breier, J. A., Jr.

2014-12-01

We report the preliminary design of a fast vertical profiling autonomous underwater vehicle, called Clio, designed to cost-effectively improve the understanding of marine microorganism ecosystem dynamics on a global scale. The insights into biogeochemical cycles to be gained from illuminating the relationships between ocean life and chemistry have led to establishment of the GEOTRACES program. The nutrient and trace element profiles generated by GEOTRACES will provide insight into what is happening biogeochemically, but not how it is happening, i.e., what biochemical pathways are active? Advances in sequencing technology and in situ preservation have made it possible to study the genomics (DNA), transcriptomics (RNA), proteomics (proteins and enzymes), metabolomics (lipids and other metabolites), and metallomics (metals), associated with marine microorganisms; however, these techniques require sample collection. To this end, Clio will carry two to four SUspended Particle Rosette (SUPR) multi-samplers to depths of 6000 m. Clio is being designed specifically to complement the GEOTRACES program—to operate simultaneously and independently of the wire-based sampling protocols developed for GEOTRACES. At each GEOTRACES ocean transect sampling station, Clio will be deployed from the ship, transit vertically to the seafloor, and then ascend to, and stop at up to 32 sampling depths, where it will filter up to 150 l of seawater per sample. Filtered samples for RNA will be administered a dose of preservative (RNALater) in situ. Clio must efficiently hold station at multiple depths between the surface and 6000 m, but also move rapidly between sampling depths. It must be chemically clean and avoid disturbing the water column while sampling. Clio must be operationally friendly, requiring few personnel to operate, and have minimal impact on shipboard operations. We have selected a positively-buoyant thruster-driven design with a quasi-isopycnal construction. Our simulations indicate the vehicle can complete dives that mirror their GEOTRACES counterparts within the station time alloted. The simulation includes the effects of material/housing compressibility and thermal expansion, and employs a global average T/S profile from the Levitus 1982 climatology.

Correlates of comorbid depression, anxiety and helplessness with obsessive-compulsive disorder in Chinese adolescents.

PubMed

Sun, Jing; Li, Zhanjiang; Buys, Nicholas; Storch, Eric A

2015-03-15

Youth with obsessive-compulsive disorder (OCD) are at risk of experiencing comorbid psychiatric conditions, such as depression and anxiety. Studies of Chinese adolescents with OCD are limited. The aim of this study was to investigate the association of depression, anxiety, and helplessness with the occurrence of OCD in Chinese adolescents. This study consisted of two stages. The first stage used a cross-sectional design involving a stratified clustered non-clinical sample of 3174 secondary school students. A clinical interview procedure was then employed to diagnose OCD in students who had a Leyton 'yes' score of 15 or above. The second phase used a case-control study design to examine the relationship of OCD to depression, anxiety and helplessness in a matched sample of 288 adolescents with clinically diagnosed OCD and 246 students without OCD. Helplessness, depression and anxiety scores were directly associated with the probability of OCD caseness. Canonical correlation analysis indicated that the OCD correlated significantly with depression, anxiety, and helplessness. Cluster analysis further indicated that the degree of the OCD is also associated with severity of depression and anxiety, and the level of helplessness. These findings suggest that depression, anxiety and helplessness are important correlates of OCD in Chinese adolescents. Future studies using longitudinal and prospective designs are required to confirm these relationships as causal. Copyright © 2014 Elsevier B.V. All rights reserved.

Pediatric nurse staffing and quality of care in the hospital setting.

PubMed

Stratton, Karen M

2008-01-01

Indicators of quality and nurse staffing in pediatrics are distinct from adults. A retrospective, correlational, linear mixed model design was used to describe relationships between pediatric nurse staffing and 5 indicators of quality care from a convenience sample of 7 academic children's hospitals. Key findings supported a strong inverse relationship between the proportion of hours of pediatric nursing care delivered by registered nurses and the rate of occurrence of central line (P < .001) and bloodstream infections (P < .05). Supplemental nurse staffing hours also demonstrated relationships between bloodstream infections and parent/family complaints.

Micro-incubator for bacterial biosensing applications

NASA Astrophysics Data System (ADS)

Clasen, Estine; Land, Kevin; Joubert, Trudi-Heleen

2016-02-01

The presence of Escherichia coli (E. coli ) is a commonly used indicator micro-organism to determine whether water is safe for human consumption.1 This paper discusses the design of a micro-incubator that can be applied to concentrate bacteria prior to environmental water quality screening tests. High sensitivity and rapid test time is essential and there is a great need for these tests to be implemented on-site without the use of a laboratory infrastructure. In the light of these requirements, a mobile micro-incubator was designed, manufactured and characterised. A polydimethylsiloxane (PDMS) receptacle has been designed to house the 1-5 ml cell culture sample.2 A nano-silver printed electronics micro-heater has been designed to incubate the bacterial sample, with an array of temperature sensors implemented to accurately measure the sample temperature at various locations in the cell culture well. The micro-incubator limits the incubation temperature range to 37+/-3 °C in order to ensure near optimal growth of the bacteria at all times.3 The incubation time is adjustable between 30 minutes and 9 hours with a maximum rise time of 15 minutes to reach the set-point temperature. The surface area of the printed nano silver heating element is 500 mm2. Electrical and COMSOL Multiphysics simulations are included in order to give insight on micro-incubator temperature control. The design and characterization of this micro-incubator allows for further research in biosensing applications.

Saltwater intrusion in the surficial aquifer system of the Big Cypress Basin, southwest Florida, and a proposed plan for improved salinity monitoring

USGS Publications Warehouse

Prinos, Scott T.

2013-01-01

The installation of drainage canals, poorly cased wells, and water-supply withdrawals have led to saltwater intrusion in the primary water-use aquifers in southwest Florida. Increasing population and water use have exacerbated this problem. Installation of water-control structures, well-plugging projects, and regulation of water use have slowed saltwater intrusion, but the chloride concentration of samples from some of the monitoring wells in this area indicates that saltwater intrusion continues to occur. In addition, rising sea level could increase the rate and extent of saltwater intrusion. The existing saltwater intrusion monitoring network was examined and found to lack the necessary organization, spatial distribution, and design to properly evaluate saltwater intrusion. The most recent hydrogeologic framework of southwest Florida indicates that some wells may be open to multiple aquifers or have an incorrect aquifer designation. Some of the sampling methods being used could result in poor-quality data. Some older wells are badly corroded, obstructed, or damaged and may not yield useable samples. Saltwater in some of the canals is in close proximity to coastal well fields. In some instances, saltwater occasionally occurs upstream from coastal salinity control structures. These factors lead to an incomplete understanding of the extent and threat of saltwater intrusion in southwest Florida. A proposed plan to improve the saltwater intrusion monitoring network in the South Florida Water Management District’s Big Cypress Basin describes improvements in (1) network management, (2) quality assurance, (3) documentation, (4) training, and (5) data accessibility. The plan describes improvements to hydrostratigraphic and geospatial network coverage that can be accomplished using additional monitoring, surface geophysical surveys, and borehole geophysical logging. Sampling methods and improvements to monitoring well design are described in detail. Geochemical analyses that provide insights concerning the sources of saltwater in the aquifers are described. The requirement to abandon inactive wells is discussed.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kristo, Michael Joseph; Keegan, Elizabeth; Colella, Michael

Nuclear forensic analysis was conducted on two uranium samples confiscated during a police investigation in Victoria, Australia. The first sample, designated NSR-F-270409-1, was a depleted uranium powder of moderate purity (~1000 μg/g total elemental impurities). The chemical form of the uranium was a compound similar to K 2(UO 2) 3O 4·4H 2O. While aliquoting NSR-F-270409-1 for analysis, the body and head of a Tineid moth was discovered in the sample. The second sample, designated NSR-F-270409-2, was also a depleted uranium powder. It was of reasonably high purity (~380 μg/g total elemental impurities). The chemical form of the uranium was primarilymore » UO 3·2H 2O, with minor phases of U 3O 8 and UO 2. While aliquoting NSR-F-270409-2 for analysis, a metal staple of unknown origin was discovered in the sample. The presence of 236U and 232U in both samples indicates that the uranium feed stocks for these samples experienced a neutron flux at some point in their history. The reactor burn-up calculated from the isotopic composition of the uranium is consistent with that of spent fuel from natural uranium (NU) fueled Pu production. These nuclear forensic conclusions allow us to categorically exclude Australia as the origin of the material and greatly reduce the number of candidate sources.« less

Evaluation of design flood estimates with respect to sample size

NASA Astrophysics Data System (ADS)

Kobierska, Florian; Engeland, Kolbjorn

2016-04-01

Estimation of design floods forms the basis for hazard management related to flood risk and is a legal obligation when building infrastructure such as dams, bridges and roads close to water bodies. Flood inundation maps used for land use planning are also produced based on design flood estimates. In Norway, the current guidelines for design flood estimates give recommendations on which data, probability distribution, and method to use dependent on length of the local record. If less than 30 years of local data is available, an index flood approach is recommended where the local observations are used for estimating the index flood and regional data are used for estimating the growth curve. For 30-50 years of data, a 2 parameter distribution is recommended, and for more than 50 years of data, a 3 parameter distribution should be used. Many countries have national guidelines for flood frequency estimation, and recommended distributions include the log Pearson II, generalized logistic and generalized extreme value distributions. For estimating distribution parameters, ordinary and linear moments, maximum likelihood and Bayesian methods are used. The aim of this study is to r-evaluate the guidelines for local flood frequency estimation. In particular, we wanted to answer the following questions: (i) Which distribution gives the best fit to the data? (ii) Which estimation method provides the best fit to the data? (iii) Does the answer to (i) and (ii) depend on local data availability? To answer these questions we set up a test bench for local flood frequency analysis using data based cross-validation methods. The criteria were based on indices describing stability and reliability of design flood estimates. Stability is used as a criterion since design flood estimates should not excessively depend on the data sample. The reliability indices describe to which degree design flood predictions can be trusted.

In situ sensor technology for simultaneous spectrophotometric measurements of seawater total dissolved inorganic carbon and pH.

PubMed

Wang, Zhaohui Aleck; Sonnichsen, Frederick N; Bradley, Albert M; Hoering, Katherine A; Lanagan, Thomas M; Chu, Sophie N; Hammar, Terence R; Camilli, Richard

2015-04-07

A new, in situ sensing system, Channelized Optical System (CHANOS), was recently developed to make high-resolution, simultaneous measurements of total dissolved inorganic carbon (DIC) and pH in seawater. Measurements made by this single, compact sensor can fully characterize the marine carbonate system. The system has a modular design to accommodate two independent, but similar measurement channels for DIC and pH. Both are based on spectrophotometric detection of hydrogen ion concentrations. The pH channel uses a flow-through, sample-indicator mixing design to achieve near instantaneous measurements. The DIC channel adapts a recently developed spectrophotometric method to achieve flow-through CO2 equilibration between an acidified sample and an indicator solution with a response time of only ∼ 90 s. During laboratory and in situ testing, CHANOS achieved a precision of ±0.0010 and ± 2.5 μmol kg(-1) for pH and DIC, respectively. In situ comparison tests indicated that the accuracies of the pH and DIC channels over a three-week time-series deployment were ± 0.0024 and ± 4.1 μmol kg(-1), respectively. This study demonstrates that CHANOS can make in situ, climatology-quality measurements by measuring two desirable CO2 parameters, and is capable of resolving the CO2 system in dynamic marine environments.

Accounting for twin births in sample size calculations for randomised trials.

PubMed

Yelland, Lisa N; Sullivan, Thomas R; Collins, Carmel T; Price, David J; McPhee, Andrew J; Lee, Katherine J

2018-05-04

Including twins in randomised trials leads to non-independence or clustering in the data. Clustering has important implications for sample size calculations, yet few trials take this into account. Estimates of the intracluster correlation coefficient (ICC), or the correlation between outcomes of twins, are needed to assist with sample size planning. Our aims were to provide ICC estimates for infant outcomes, describe the information that must be specified in order to account for clustering due to twins in sample size calculations, and develop a simple tool for performing sample size calculations for trials including twins. ICCs were estimated for infant outcomes collected in four randomised trials that included twins. The information required to account for clustering due to twins in sample size calculations is described. A tool that calculates the sample size based on this information was developed in Microsoft Excel and in R as a Shiny web app. ICC estimates ranged between -0.12, indicating a weak negative relationship, and 0.98, indicating a strong positive relationship between outcomes of twins. Example calculations illustrate how the ICC estimates and sample size calculator can be used to determine the target sample size for trials including twins. Clustering among outcomes measured on twins should be taken into account in sample size calculations to obtain the desired power. Our ICC estimates and sample size calculator will be useful for designing future trials that include twins. Publication of additional ICCs is needed to further assist with sample size planning for future trials. © 2018 John Wiley & Sons Ltd.

An evaluation of the efficiency of minnow traps for estimating the abundance of minnows in desert spring systems

USGS Publications Warehouse

Peterson, James T.; Scheerer, Paul D.; Clements, Shaun

2015-01-01

Desert springs are sensitive aquatic ecosystems that pose unique challenges to natural resource managers and researchers. Among the most important of these is the need to accurately quantify population parameters for resident fish, particularly when the species are of special conservation concern. We evaluated the efficiency of baited minnow traps for estimating the abundance of two at-risk species, Foskett Speckled Dace Rhinichthys osculus ssp. and Borax Lake Chub Gila boraxobius, in desert spring systems in southeastern Oregon. We evaluated alternative sample designs using simulation and found that capture–recapture designs with four capture occasions would maximize the accuracy of estimates and minimize fish handling. We implemented the design and estimated capture and recapture probabilities using the Huggins closed-capture estimator. Trap capture probabilities averaged 23% and 26% for Foskett Speckled Dace and Borax Lake Chub, respectively, but differed substantially among sample locations, through time, and nonlinearly with fish body size. Recapture probabilities for Foskett Speckled Dace were, on average, 1.6 times greater than (first) capture probabilities, suggesting “trap-happy” behavior. Comparison of population estimates from the Huggins model with the commonly used Lincoln–Petersen estimator indicated that the latter underestimated Foskett Speckled Dace and Borax Lake Chub population size by 48% and by 20%, respectively. These biases were due to variability in capture and recapture probabilities. Simulation of fish monitoring that included the range of capture and recapture probabilities observed indicated that variability in capture and recapture probabilities in time negatively affected the ability to detect annual decreases by up to 20% in fish population size. Failure to account for variability in capture and recapture probabilities can lead to poor quality data and study inferences. Therefore, we recommend that fishery researchers and managers employ sample designs and estimators that can account for this variability.

Characterizing exposures to airborne metals and nanoparticle emissions in a refinery.

PubMed

Miller, Arthur; Drake, Pamela L; Hintz, Patrick; Habjan, Matt

2010-07-01

An air quality survey was conducted at a precious metals refinery in order to evaluate worker exposures to airborne metals and to provide detailed characterization of the aerosols. Two areas within the refinery were characterized: a furnace room and an electro-refining area. In line with standard survey practices, both personal and area air filter samples were collected on 37-mm filters and analyzed for metals by inductively coupled plasma-atomic emission spectroscopy. In addition to the standard sampling, measurements were conducted using other tools, designed to provide enhanced characterization of the workplace aerosols. The number concentration and number-weighted particle size distribution of airborne particles were measured with a fast mobility particle sizer (FMPS). Custom-designed software was used to correlate particle concentration data with spatial location data to generate contour maps of particle number concentrations in the work areas. Short-term samples were collected in areas of localized high concentrations and analyzed using transmission electron microscopy (TEM) and energy dispersive spectroscopy (EDS) to determine particle morphology and elemental chemistry. Analysis of filter samples indicated that all of the workers were exposed to levels of silver above the Occupational Safety and Health Administration permissible exposure limit of 0.01 mg m(-3) even though the localized ventilation was functioning. Measurements with the FMPS indicated that particle number concentrations near the furnace increased up to 1000-fold above the baseline during the pouring of molten metal. Spatial mapping revealed localized elevated particle concentrations near the furnaces and plumes of particles rising into the stairwells and traveling to the upper work areas. Results of TEM/EDS analyses confirmed the high number of nanoparticles measured by the FMPS and indicated the aerosols were rich in metals including silver, lead, antimony, selenium, and zinc. Results of the survey were used to deduce appropriate strategies for mitigation of worker exposure to airborne metals.

Effect of structure in problem based learning on science teaching efficacy beliefs and science content knowledge of elementary preservice teachers

NASA Astrophysics Data System (ADS)

Sasser, Selena Kay

This study examined the effects of differing amounts of structure within the problem based learning instructional model on elementary preservice teachers' science teaching efficacy beliefs, including personal science teaching efficacy and science teaching outcome expectancy, and content knowledge acquisition. This study involved sixty (60) undergraduate elementary preservice teachers enrolled in three sections of elementary science methods classes at a large Midwestern research university. This study used a quasi-experimental nonequivalent design to collect and analyze both quantitative and qualitative data. Participants completed instruments designed to assess science teaching efficacy beliefs, science background, and demographic data. Quantitative data from pre and posttests was obtained using the science teaching efficacy belief instrument-preservice (STEBI-B) developed by Enochs and Riggs (1990) and modified by Bleicher (2004). Data collection instruments also included a demographic questionnaire, an analytic rubric, and a structured interview; both created by the researcher. Quantitative data was analyzed by conducting ANCOVA, paired samples t-test, and independent samples t-test. Qualitative data was analyzed using coding and themes. Each of the treatment groups received the same problem scenario, one group experienced a more structured PBL setting, and one group experienced a limited structure PBL setting. Research personnel administered pre and posttests to determine the elementary preservice teachers' science teaching efficacy beliefs. The results show elementary preservice teachers'science teaching efficacy beliefs can be influence by the problem based learning instructional model. This study did not find that the amount of structure in the form of core ideas to consider and resources for further research increased science teaching efficacy beliefs in this sample. Results from the science content knowledge rubric indicated that structure can increase science content knowledge in this sample. Qualitative data from the tutor, fidelity raters, and interviews indicated the participants were excited about the problem and were interested in the science content knowledge related to the problem. They also indicated they were motivated to continue informal study in the problem area. Participants indicated, during the interview, their initial frustration with the lack of knowledge gained from the tutor; however, indicated this led to more learning on their part. This study will contribute to the overall knowledge of problem based learning and its structures, science teaching efficacy beliefs of elementary preservice teachers, and to current teaching and learning practices.

630 A MARITIME NUCLEAR STEAM GENERATOR. Progress Report No. 2

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

1962-09-28

A layout of a reduced-height 630A assembly (34 to 23 ft) was prepared and is presently being evaluated for use in a merchant vessel. While shielding studies indicate the need for some rearrangement of the shield materials, the desired radiation constraint can be obtained without an increase in shielding weight. A preliminary stress analysis of the pressure vessel, flow path analysis, and insulation evaluation was completed and showed no major problems. Evaluation of the total containment design indicates a design pressure of 45 psig. The Critical Experiment (CE) mockup is about 80% complete. The CE tank and dolly is aboutmore » 50% complete. The CE hazards report was reviewed and approved. The draft of the test program and procedures document is 75% complete. The LPT control room modifications were made, and the draft of the standard operating procedures completed. The CE fuel was inspected and a significant portion was found to be of no use, about 60% requires recoating. Creep and oxidation test time on some of the fuel sheet has exceeded 3000 hr with no significant oxidation or elongation on any of the samples. The nickel -chromium alloy sheet high- temperature (1750 F) stress and oxidating testing have exceeded 5000 hr with elongations below 0.8% except for one sample of 2.3%. Experimental fuel sheet samples were prepared and comparative property studies were ini-tiated. Fabrication of the ring test assembly, 3-F-1, for test in the MTR is essentially complete. The design of the test ring for seal evaluations was initiated. A detailed schedule for the work in FY 63 was prepared and issued for comments and concurrence. (auth)« less

Impact of non-uniform correlation structure on sample size and power in multiple-period cluster randomised trials.

PubMed

Kasza, J; Hemming, K; Hooper, R; Matthews, Jns; Forbes, A B

2017-01-01

Stepped wedge and cluster randomised crossover trials are examples of cluster randomised designs conducted over multiple time periods that are being used with increasing frequency in health research. Recent systematic reviews of both of these designs indicate that the within-cluster correlation is typically taken account of in the analysis of data using a random intercept mixed model, implying a constant correlation between any two individuals in the same cluster no matter how far apart in time they are measured: within-period and between-period intra-cluster correlations are assumed to be identical. Recently proposed extensions allow the within- and between-period intra-cluster correlations to differ, although these methods require that all between-period intra-cluster correlations are identical, which may not be appropriate in all situations. Motivated by a proposed intensive care cluster randomised trial, we propose an alternative correlation structure for repeated cross-sectional multiple-period cluster randomised trials in which the between-period intra-cluster correlation is allowed to decay depending on the distance between measurements. We present results for the variance of treatment effect estimators for varying amounts of decay, investigating the consequences of the variation in decay on sample size planning for stepped wedge, cluster crossover and multiple-period parallel-arm cluster randomised trials. We also investigate the impact of assuming constant between-period intra-cluster correlations instead of decaying between-period intra-cluster correlations. Our results indicate that in certain design configurations, including the one corresponding to the proposed trial, a correlation decay can have an important impact on variances of treatment effect estimators, and hence on sample size and power. An R Shiny app allows readers to interactively explore the impact of correlation decay.

Detection of Bovine and Porcine Adenoviruses for Tracing the Source of Fecal Contamination

PubMed Central

Maluquer de Motes, Carlos; Clemente-Casares, Pilar; Hundesa, Ayalkibet; Martín, Margarita; Girones, Rosina

2004-01-01

In this study, a molecular procedure for the detection of adenoviruses of animal origin was developed to evaluate the level of excretion of these viruses by swine and cattle and to design a test to facilitate the tracing of specific sources of environmental viral contamination. Two sets of oligonucleotides were designed, one to detect porcine adenoviruses and the other to detect bovine and ovine adenoviruses. The specificity of the assays was assessed in 31 fecal samples and 12 sewage samples that were collected monthly during a 1-year period. The data also provided information on the environmental prevalence of animal adenoviruses. Porcine adenoviruses were detected in 17 of 24 (70%) pools of swine samples studied, with most isolates being closely related to serotype 3. Bovine adenoviruses were present in 6 of 8 (75%) pools studied, with strains belonging to the genera Mastadenovirus and Atadenovirus and being similar to bovine adenoviruses of types 2, 4, and 7. These sets of primers produced negative results in nested PCR assays when human adenovirus controls and urban-sewage samples were tested. Likewise, the sets of primers previously designed for detection of human adenovirus also produced negative results with animal adenoviruses. These results indicate the importance of further studies to evaluate the usefulness of these tests to trace the source of fecal contamination in water and food and for environmental studies. PMID:15006765

Detection of bovine and porcine adenoviruses for tracing the source of fecal contamination.

PubMed

Maluquer de Motes, Carlos; Clemente-Casares, Pilar; Hundesa, Ayalkibet; Martín, Margarita; Girones, Rosina

2004-03-01

In this study, a molecular procedure for the detection of adenoviruses of animal origin was developed to evaluate the level of excretion of these viruses by swine and cattle and to design a test to facilitate the tracing of specific sources of environmental viral contamination. Two sets of oligonucleotides were designed, one to detect porcine adenoviruses and the other to detect bovine and ovine adenoviruses. The specificity of the assays was assessed in 31 fecal samples and 12 sewage samples that were collected monthly during a 1-year period. The data also provided information on the environmental prevalence of animal adenoviruses. Porcine adenoviruses were detected in 17 of 24 (70%) pools of swine samples studied, with most isolates being closely related to serotype 3. Bovine adenoviruses were present in 6 of 8 (75%) pools studied, with strains belonging to the genera Mastadenovirus and Atadenovirus and being similar to bovine adenoviruses of types 2, 4, and 7. These sets of primers produced negative results in nested PCR assays when human adenovirus controls and urban-sewage samples were tested. Likewise, the sets of primers previously designed for detection of human adenovirus also produced negative results with animal adenoviruses. These results indicate the importance of further studies to evaluate the usefulness of these tests to trace the source of fecal contamination in water and food and for environmental studies.

Compulsive sexual behavior inventory: a preliminary study of reliability and validity.

PubMed

Coleman, E; Miner, M; Ohlerking, F; Raymond, N

2001-01-01

This preliminary study was designed to develop empirically a scale of compulsive sexual behavior (CSB) and to test its reliability and validity in a sample of individuals with nonparaphilic CSB (N = 15), in a sample of pedophiles (N = 35) in treatment for sexual offending, and in a sample of normal controls (N = 42). Following a factor analysis and a varimax rotation, those items with factor loadings on the rotated factors of greater than .60 were retained. Three factors were identified, which appeared to measure control, abuse, and violence. Cronbach's alphas indicated that the subscales have good reliability. The 28-item scale was then tested for validity by a linear discriminant function analysis. The scale successfully discriminated the nonparaphilic CSB sample and the pedophiles from controls. Further analysis indicated that this scale is a valid measure of CSB in that there were significant differences between the three groups on the control subscale. Pedophiles scored significantly lower than the other two groups on the abuse subscale, with the other two groups not scoring significantly differently from one another. This indicated that pedophiles were more abusive than the nonparaphilic CSB individuals or the controls. Pedophiles scored significantly lower than controls on the violence subscale. Nonparaphilic individuals with compulsive sexual behavior scored slightly lower on the violence subscale, although not significantly different. As a preliminary study, there are several limitations to this study, which should be addressed, in further studies with larger sample sizes.

Plant Disease Severity Assessment-How Rater Bias, Assessment Method, and Experimental Design Affect Hypothesis Testing and Resource Use Efficiency.

PubMed

Chiang, Kuo-Szu; Bock, Clive H; Lee, I-Hsuan; El Jarroudi, Moussa; Delfosse, Philippe

2016-12-01

The effect of rater bias and assessment method on hypothesis testing was studied for representative experimental designs for plant disease assessment using balanced and unbalanced data sets. Data sets with the same number of replicate estimates for each of two treatments are termed "balanced" and those with unequal numbers of replicate estimates are termed "unbalanced". The three assessment methods considered were nearest percent estimates (NPEs), an amended 10% incremental scale, and the Horsfall-Barratt (H-B) scale. Estimates of severity of Septoria leaf blotch on leaves of winter wheat were used to develop distributions for a simulation model. The experimental designs are presented here in the context of simulation experiments which consider the optimal design for the number of specimens (individual units sampled) and the number of replicate estimates per specimen for a fixed total number of observations (total sample size for the treatments being compared). The criterion used to gauge each method was the power of the hypothesis test. As expected, at a given fixed number of observations, the balanced experimental designs invariably resulted in a higher power compared with the unbalanced designs at different disease severity means, mean differences, and variances. Based on these results, with unbiased estimates using NPE, the recommended number of replicate estimates taken per specimen is 2 (from a sample of specimens of at least 30), because this conserves resources. Furthermore, for biased estimates, an apparent difference in the power of the hypothesis test was observed between assessment methods and between experimental designs. Results indicated that, regardless of experimental design or rater bias, an amended 10% incremental scale has slightly less power compared with NPEs, and that the H-B scale is more likely than the others to cause a type II error. These results suggest that choice of assessment method, optimizing sample number and number of replicate estimates, and using a balanced experimental design are important criteria to consider to maximize the power of hypothesis tests for comparing treatments using disease severity estimates.

Microbial Groundwater Sampling Protocol for Fecal-Rich Environments

PubMed Central

Harter, Thomas; Watanabe, Naoko; Li, Xunde; Atwill, Edward R; Samuels, William

2014-01-01

Inherently, confined animal farming operations (CAFOs) and other intense fecal-rich environments are potential sources of groundwater contamination by enteric pathogens. The ubiquity of microbial matter poses unique technical challenges in addition to economic constraints when sampling wells in such environments. In this paper, we evaluate a groundwater sampling protocol that relies on extended purging with a portable submersible stainless steel pump and Teflon® tubing as an alternative to equipment sterilization. The protocol allows for collecting a large number of samples quickly, relatively inexpensively, and under field conditions with limited access to capacity for sterilizing equipment. The protocol is tested on CAFO monitoring wells and considers three cross-contamination sources: equipment, wellbore, and ambient air. For the assessment, we use Enterococcus, a ubiquitous fecal indicator bacterium (FIB), in laboratory and field tests with spiked and blank samples, and in an extensive, multi-year field sampling campaign on 17 wells within 2 CAFOs. The assessment shows that extended purging can successfully control for equipment cross-contamination, but also controls for significant contamination of the well-head, within the well casing and within the immediate aquifer vicinity of the well-screen. Importantly, our tests further indicate that Enterococcus is frequently entrained in water samples when exposed to ambient air at a CAFO during sample collection. Wellbore and air contamination pose separate challenges in the design of groundwater monitoring strategies on CAFOs that are not addressed by equipment sterilization, but require adequate QA/QC procedures and can be addressed by the proposed sampling strategy. PMID:24903186

Variability of indoor fungal microbiome of green and non-green low-income homes in Cincinnati, Ohio.

PubMed

Coombs, Kanistha; Taft, Diana; Ward, Doyle V; Green, Brett J; Chew, Ginger L; Shamsaei, Behrouz; Meller, Jaroslaw; Indugula, Reshmi; Reponen, Tiina

2018-01-01

"Green" housing is designed to use low-impact materials, increase energy efficiency and improve occupant health. However, little is known about the indoor mycobiome of green homes. The current study is a subset of a multicenter study that aims to investigate the indoor environment of green homes and the respiratory health of asthmatic children. In the current study, the mycobiome in air, bed dust and floor dust was compared between green (study site) and non-green (control site), low-income homes in Cincinnati, Ohio. The samples were collected at baseline (within four months following renovation), and 12months after the baseline at the study site. Parallel sample collection was conducted in non-green control homes. Air samples were collected by PM2.5 samplers over 5-days. Bed and floor dust samples were vacuumed after the air sampling was completed. The DNA sample extracts were analyzed using ITS amplicon sequencing. Analysis indicated that there was no clear trend in the fungal communities between green and non-green homes. Instead, fungal community differences were greatest between sample types - air, bed, and floor. Microbial communities also changed substantially between sampling intervals in both green and non-green homes for all sample types, potentially indicating that there was very little stability in the mycobiomes. Research gaps remain regarding how indoor mycobiome fluctuates over time. Longer follow-up periods might elucidate the effect of green renovation on microbial load in buildings. Copyright © 2017 Elsevier B.V. All rights reserved.

Rainwater harvesting in American Samoa: current practices and indicative health risks.

PubMed

Kirs, Marek; Moravcik, Philip; Gyawali, Pradip; Hamilton, Kerry; Kisand, Veljo; Gurr, Ian; Shuler, Christopher; Ahmed, Warish

2017-05-01

Roof-harvested rainwater (RHRW) is an important alternative source of water that many island communities can use for drinking and other domestic purposes when groundwater and/or surface water sources are contaminated, limited, or simply not available. The aim of this pilot-scale study was to investigate current RHRW practices in American Samoa (AS) and to evaluate and compare the quality of water from common potable water sources including RHRW stored in tanks, untreated stream water, untreated municipal well water, and treated municipal tap water samples. Samples were analyzed using culture-based methods, quantitative polymerase chain reaction (qPCR), and 16S amplicon sequencing-based methods. Based on indicator bacteria (total coliform and Escherichia coli) concentrations, the quality of RHRW was slightly lower than well and chlorinated tap water but exceeded that of untreated stream water. Although no Giardia or Leptospira spp. were detected in any of the RHRW samples, 86% of the samples were positive for Cryptosporidium spp. All stream water samples tested positive for Cryptosporidium spp. Opportunistic pathogens (Pseudomonas aeruginosa and Mycobacterium intracellulare) were also detected in the RHRW samples (71 and 21% positive samples, respectively). Several potentially pathogenic genera of bacteria were also detected in RHRW by amplicon sequencing. Each RHRW system was characterized by distinct microbial communities, 77% of operational taxonomic units (OTUs) were detected only in a single tank, and no OTU was shared by all the tanks. Risk of water-borne illness increased in the following order: chlorinated tap water/well water < RHRW < stream water. Frequent detection of opportunistic pathogens indicates that RHRW should be treated before use. Stakeholder education on RHRW system design options as well as on importance of regular cleaning and proper management techniques could improve the quality of the RHRW in AS.

Investigating controls on denitrification rates during managed aquifer recharge: Field studies of infiltration

NASA Astrophysics Data System (ADS)

Beganskas, S.; Gorski, G.; Fisher, A. T.; Weir, W. B.; Schmidt, C. M.; Saltikov, C.; Stoneburner, B.; Hernandez, J.; Harmon, R. E.; Weathers, T. S.

2016-12-01

We have designed field experiments to observe and quantify water quality improvement during infiltration in the shallow subsurface, as part of managed aquifer recharge (MAR). We are exploring how microbial diversity and denitrification rate respond to different infiltration rates and the presence or absence of carbon-rich reactive materials (woodchips or biochar). In 2015, we conducted a series of two-week-long field infiltration tests, and in 2016 we are running tests at a new site. For each test, nitrate-rich water (20-25 ppm NO3-N) was continuously applied to 1-m square plots instrumented to measure infiltration rates and sample subsurface water at multiple depths. Soil samples were collected before and after each test to assess microbial diversity. In 2015, we observed infiltration rates of 4-18 m/d, consistent with very sandy soils at our field site. All water samples had >20 ppm DOC, indicating that denitrification was unlikely carbon-limited. There was a net increase in DOC in fluids sampled below woodchips, but no change in DOC in samples from un-amended native soil. Up to 20% of NO3- was removed below woodchips on days with infiltration rates below 15 m/d. Nitrate removal was not observed in native soil, even though infiltration rates were considerably lower, 4 m/d. Isotopic analyses indicate that denitrification is likely the mechanism for nitrate removal. Genomic sequencing of soil microbes shows that microbial populations' relative abundance shifted significantly due to infiltration; further analyses are underway. Our results suggest that rapid infiltration can lead to oxic conditions unfavorable for denitrification, and that a carbon-rich reactive material (woodchips) may stimulate microbially-mediated denitrification. Our experimental design is a novel way to examine factors that impact water quality during infiltration. Nitrate, a pervasive groundwater contaminant, can be removed via denitrification during MAR under some conditions, depending on infiltration rate, available carbon, and substrate material. Our work has applications for designing MAR systems that effectively improve water supply and water quality.

Best Practices in Military Design Teams

DTIC Science & Technology

2015-03-01

this assessment. 10 metacognitive thinkers, and can reflect and comment on how the team is thinking about a particular topic. These findings...planning team employed a thorough and intentional selection process that included assessment instruments, several interviews, and a writing assignment...Myers-Briggs Type Indicator (MBTI), StrengthsFinder, and the Kirton Adaption-Innovation Inventory. • Writing samples and other examples of work

How and Why Does the 5-HTTLPR Gene Moderate Associations between Maternal Unresponsiveness and Children's Disruptive Problems?

ERIC Educational Resources Information Center

Davies, Patrick T.; Cicchetti, Dante

2014-01-01

This study tested the 5-HTTLPR gene as a moderator in the relation between maternal unresponsiveness and child externalizing symptoms in a disadvantaged, predominantly Black sample of two hundred and one 2-year-old children and their mothers. Using a multimethod, prospective design, structural equation model analyses indicated that maternal…

Social Network Type and Subjective Well-Being in a National Sample of Older Americans

ERIC Educational Resources Information Center

Litwin, Howard; Shiovitz-Ezra, Sharon

2011-01-01

Purpose: The study considers the social networks of older Americans, a population for whom there have been few studies of social network type. It also examines associations between network types and well-being indicators: loneliness, anxiety, and happiness. Design and Methods: A subsample of persons aged 65 years and older from the first wave of…

Diurnal Cortisol Secretion at Home and in Child Care: A Prospective Study of 2-Year-Old Toddlers

ERIC Educational Resources Information Center

Ouellet-Morin, Isabelle; Tremblay, Richard E.; Boivin, Michel; Meaney, Michael; Kramer, Michael; Cote, Sylvana M.

2010-01-01

Background: Previous studies indicate that children may experience disrupted cortisol secretion in child care. The extent to which this is a transient or long-term disruption is not known, as most studies have relied on cross-sectional designs, and age-heterogeneous small sample sizes. This study aims to (a) compare cortisol secretion measured at…

Computers for Cognitive Development in Early Childhood--The Teacher's Role in the Computer Learning Environment

ERIC Educational Resources Information Center

Nir-Gal, Ofra; Klein, Pnina S.

2004-01-01

This study was designed to examine the effect of different kinds of adult mediation on the cognitive performance of young children who used computers. The study sample included 150 kindergarten children aged 5-6. The findings indicate that children who engaged in adult-mediated computer activity improved the level of their cognitive performance on…

Empirical Validation of Indices for Consideration in the Revision of Recommended Senior School Financial Accounting Textbooks in Southwestern Nigeria

ERIC Educational Resources Information Center

Oyetoro, Oyebode Stephen; Ojo, Oloyede Ezekiel

2017-01-01

The study determined a significant difference in teachers' overall evaluations of six recommended Financial Accounting Textbooks in Southwestern Nigeria. It also assessed the specific evaluation parameters that account for the difference. It adopted the survey research design. The multistage sampling technique was used to select a total of 80…

Global Quality of Life (QOL), Health and Ability Are Primarily Determined by Our Consciousness: Research Findings from Denmark 1991-2004

ERIC Educational Resources Information Center

Ventegodt, Soren; Flensborg-Madsen, Trine; Andersen, Niels Jorgen; Nielsen, Michael; Mohammed, Morad; Merrick, Joav

2005-01-01

Objective: To explain the global quality of life (QOL) from 2000 indicators representing all aspects of life. Design and setting: Two cross sectional population studies, one prospective cohort study and one retrospective cohort study. Participants: (1) Representative sample of 2500 Danes (18-88 years), (2) 7222 members of the Copenhagen Perinatal…

Distributional effects of Oportunidades on early child development.

PubMed

Figueroa, José Luis

2014-07-01

The Mexican Oportunidades program is designed to increase human capital through investments in education, health, and nutrition for children in extreme poverty. Although the program is not expressly designed to promote a child's cognitive and non-cognitive development, the set of actions carried out by the program could eventually facilitate improvements in these domains. Previous studies on the Oportunidades program have found little impact on children's cognition but have found positive effects on their non-cognitive development. However, the majority of these studies use the average outcome to measure the impact of the program and thus overlook other "non-average" effects. This paper uses stochastic dominance methods to investigate results beyond the mean by comparing cumulative distributions for both children who are and children who are not aided by the program. Four indicators of cognitive development and one indicator of non-cognitive development are analyzed using a sample of 2595 children aged two to six years. The sample was collected in rural communities in Mexico in 2003 as part of the program evaluation. Similar to previous studies, the program is found to positively influence children's non-cognitive abilities: children enrolled in the program manifest fewer behavioral problems compared with children who are not enrolled. In addition, different program effects are found for girls and boys and for indigenous and non-indigenous children. The ranges where the effect is measured cover a large part of the outcome's distribution, and these ranges include a large proportion of the children in the sample. With regard to cognitive development, only one indicator (short-term memory) shows positive effects. Nevertheless, the results for this indicator demonstrate that children with low values of cognitive development benefit from the program, whereas children with high values do not. Overall, the program has positive effects on child development, especially for the most vulnerable, who are at the bottom of the distribution. Copyright © 2014 Elsevier Ltd. All rights reserved.

Knowledge and attitudes about urinary incontinence among community-dwelling Korean American women.

PubMed

Kang, Youngmi

2009-01-01

The purpose of this study was to explore knowledge and attitudes about urinary incontinence (UI) among Korean American women with incontinence and provide initial information needed to design education programs and culture-specific interventions. One hundred eighty-two community-dwelling Korean American women who were 30 years and older and self-identified as having UI were invited to participate in the study. Data collection was conducted in 12 Korean religious organizations. This study uses a cross-sectional descriptive design by means of interviews. The Incontinence Quiz was used to measure knowledge and attitudes about UI. Higher scores indicate greater knowledge and more positive attitudes. The mean Incontinence Quiz was 4.85 (SD = 2.75) out of 14, which was much lower than the midpoint of 7.0, indicating that respondents tended to have limited knowledge and negative attitudes toward UI. The number of correct responses to the items on the Incontinence Quiz in this sample was lower than that reported in other studies that sampled the general population. Interventions to improve Korean women's knowledge of, and attitudes toward, UI are needed. WOC and continence nurses should take an active role in educating women about the prevention and treatment of UI.

Recreational fishing in surface mine lakes - a case study in St. Clair County, Illinois

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mannz, R.H.

1985-12-09

Recent mining legislation mandates the reclamation of surface-mined areas to the pre-mining contour, eliminating the potential of many new lakes. However, many pre-law mine lakes have considerable recreational value benefiting the surrounding regions. During 1983, 5296 anglers participated in Peabody Coal Company's Coal Company's recreational fishing program in St. Clair County, Illinois. A random sample of participants were mailed a questionnaire designed to identify user/area characteristics economic implications, and sport fishing resources of the program lakes. Sample data indicated 62,760 angling days spent on 600 acres of program waters during 1983. The single most sought after fish was the largemore » mouth bass. Expenditures by 1983 program users were estimated at $753,120 or $1255 per acre of surface water. Opportunity cost calculations indicated that recreational fishing was an equal or better trade-off to the regional economy when compared to income that could have been produced from rowcrop agriculture. Reclamation techniques designed for fish and wildlife purposes and leaving such areas should be encouraged. Returning surface-mined areas to the pre-mining contour and use is not necessarily the most cost effective or desirable method of reclamation. 14 references, 4 tables.« less

Initial implementation and evaluation of a Hepatitis C treatment clinical decision support system (CDSS)

PubMed Central

Fathauer, L; Meek, J.

2012-01-01

Background Clinician compliance with clinical guidelines in the treatment of patients with Hepatitis C (HCV) has been reported to be as low as 18.5%. Treatment is complex and patient compliance is often inconsistent thus, active clinician surveillance and support is essential to successful outcomes. A clinical decision support system (CDSS) embedded within an electronic health record can provide reminders, summarize key data, and facilitate coordination of care. To date, the literature is bereft of information describing the implementation and evaluation of a CDSS to support HCV treatment. Objective The purpose of this case report is to describe the design, implementation, and initial evaluation of an HCV-specific CDSS while piloting data collection metrics and methods to be used in a larger study across multiple practices. Methods The case report describes the design and implementation processes with preliminary reporting on impact of the CDSS on quality indicator completion by comparing the pre-CDSS group to the post-CDSS group. Results The CDSS was successfully designed and implemented using an iterative, collaborative process. Pilot testing of the clinical outcomes of the CDSS revealed high rates of quality indicator completion in both the pre- and post-CDSS; although the post-CDSS group received a higher frequency of reminders (4.25 per patient) than the pre-CDSS group (.25 per patient). Conclusions This case report documents the processes used to successfully design and implement an HCV CDSS. While the small sample size precludes generalizability of findings, results did positively demonstrate the feasibility of comparing quality indicator completion rates pre-CDSS and post-CDSS. It is recommended that future studies include a larger sample size across multiple providers with expanded outcomes measures related to patient outcomes, staff satisfaction with the CDSS, and time studies to evaluate efficiency and cost effectiveness of the CDSS. PMID:23646082

Novel Horn Designs for Power Ultrasonics

NASA Technical Reports Server (NTRS)

Sherrit, Stewart; Badescu, M.; Bao, X.; Bar-Cohen, Y.; Chang, Z.

2004-01-01

Ultrasonic horns are used in a variety of industrial and medical applications. At JPL a rock-sampling tool based on an ultrasonic horn was developed to drill, abrade and core rock samples including hard basalts. This device is an impact device, which uses ultrasonic vibratlons that occur at the horn tip to produce a sonic resonance with the aid of a loosely connected mass. Although standard horns are found in many current industrial designs they suffer from a few key limitations when used for USDC applications. Manufacturing a horn requires turning down stock material (e.g. Titanium) from the larger outer diameter to the horn tip diameter, and this process is both time consuming and wasteful. In this paper, we present novel horn designs that are specifically designed for impact applications as the USDC. One such design addressed the excasive length that is involved with the use of the horn limiting its applications when system dimensions are constrained. For this purpose, a folded horn design was conceived that reduces the overall length of the resonator (physical length) but maintains or increases the acoustic length. Initial experiments with horns having such P design indicate that the tip displacement can be further adjusted by phasing the bending displacements and the extensional displacements. Another conceived horn design is the 'dog bone' horn that uses an end mass on the horn tip io increase the impact efficiency of the horn. In this paper, the experimental results for these novel born designs are presented and compared to the results predicted by theory.

Evaluation of the Biological Sampling Kit (BiSKit) for Large-Area Surface Sampling

PubMed Central

Buttner, Mark P.; Cruz, Patricia; Stetzenbach, Linda D.; Klima-Comba, Amy K.; Stevens, Vanessa L.; Emanuel, Peter A.

2004-01-01

Current surface sampling methods for microbial contaminants are designed to sample small areas and utilize culture analysis. The total number of microbes recovered is low because a small area is sampled, making detection of a potential pathogen more difficult. Furthermore, sampling of small areas requires a greater number of samples to be collected, which delays the reporting of results, taxes laboratory resources and staffing, and increases analysis costs. A new biological surface sampling method, the Biological Sampling Kit (BiSKit), designed to sample large areas and to be compatible with testing with a variety of technologies, including PCR and immunoassay, was evaluated and compared to other surface sampling strategies. In experimental room trials, wood laminate and metal surfaces were contaminated by aerosolization of Bacillus atrophaeus spores, a simulant for Bacillus anthracis, into the room, followed by settling of the spores onto the test surfaces. The surfaces were sampled with the BiSKit, a cotton-based swab, and a foam-based swab. Samples were analyzed by culturing, quantitative PCR, and immunological assays. The results showed that the large surface area (1 m2) sampled with the BiSKit resulted in concentrations of B. atrophaeus in samples that were up to 10-fold higher than the concentrations obtained with the other methods tested. A comparison of wet and dry sampling with the BiSKit indicated that dry sampling was more efficient (efficiency, 18.4%) than wet sampling (efficiency, 11.3%). The sensitivities of detection of B. atrophaeus on metal surfaces were 42 ± 5.8 CFU/m2 for wet sampling and 100.5 ± 10.2 CFU/m2 for dry sampling. These results demonstrate that the use of a sampling device capable of sampling larger areas results in higher sensitivity than that obtained with currently available methods and has the advantage of sampling larger areas, thus requiring collection of fewer samples per site. PMID:15574898

Variation of microorganism concentrations in urban stormwater runoff with land use and seasons.

PubMed

Selvakumar, Ariamalar; Borst, Michael

2006-03-01

Stormwater runoff samples were collected from outfalls draining small municipal separate storm sewer systems. The samples were collected from three different land use areas based on local designation (high-density residential, low-density residential and landscaped commercial). The concentrations of microorganisms in the stormwater runoff were found to be similar in magnitude to, but less variable than, those reported in the stormwater National Pollutant Discharge Elimination System (NPDES) database. Microorganism concentrations from high-density residential areas were higher than those associated with low-density residential and landscaped commercial areas. Since the outfalls were free of sanitary wastewater cross-connections, the major sources of microorganisms to the stormwater runoff were most likely from the feces of domestic animals and wildlife. Concentrations of microorganisms were significantly affected by the season during which the samples were collected. The lowest concentrations were observed during winter except for Staphylococcus aureus. The Pearson correlation coefficients among different indicators showed weak linear relationships and the relationships were statistically significant. However, the relationships between indicators and pathogens were poorly correlated and were not statistically significant, suggesting the use of indicators as evidence of the presence of pathogens is not appropriate. Further, the correlation between the concentration of the traditionally monitored indicators (total coliforms and fecal coliforms) and the suggested substitutes (enterococci and E. coli) is weak, but statistically significant, suggesting that historical time series will be only a qualitative indicator of impaired waters under the revised criteria for recreational water quality by the US EPA.

Four Reasons to Question the Accuracy of a Biotic Index; the Risk of Metric Bias and the Scope to Improve Accuracy

PubMed Central

Monaghan, Kieran A.

2016-01-01

Natural ecological variability and analytical design can bias the derived value of a biotic index through the variable influence of indicator body-size, abundance, richness, and ascribed tolerance scores. Descriptive statistics highlight this risk for 26 aquatic indicator systems; detailed analysis is provided for contrasting weighted-average indices applying the example of the BMWP, which has the best supporting data. Differences in body size between taxa from respective tolerance classes is a common feature of indicator systems; in some it represents a trend ranging from comparatively small pollution tolerant to larger intolerant organisms. Under this scenario, the propensity to collect a greater proportion of smaller organisms is associated with negative bias however, positive bias may occur when equipment (e.g. mesh-size) selectively samples larger organisms. Biotic indices are often derived from systems where indicator taxa are unevenly distributed along the gradient of tolerance classes. Such skews in indicator richness can distort index values in the direction of taxonomically rich indicator classes with the subsequent degree of bias related to the treatment of abundance data. The misclassification of indicator taxa causes bias that varies with the magnitude of the misclassification, the relative abundance of misclassified taxa and the treatment of abundance data. These artifacts of assessment design can compromise the ability to monitor biological quality. The statistical treatment of abundance data and the manipulation of indicator assignment and class richness can be used to improve index accuracy. While advances in methods of data collection (i.e. DNA barcoding) may facilitate improvement, the scope to reduce systematic bias is ultimately limited to a strategy of optimal compromise. The shortfall in accuracy must be addressed by statistical pragmatism. At any particular site, the net bias is a probabilistic function of the sample data, resulting in an error variance around an average deviation. Following standardized protocols and assigning precise reference conditions, the error variance of their comparative ratio (test-site:reference) can be measured and used to estimate the accuracy of the resultant assessment. PMID:27392036

Assessing the health attitudes, beliefs, and behaviors of African Americans attending church: a comparison from two communities.

PubMed

Lewis, R K; Green, B L

2000-06-01

Public health officials and researchers continue to be increasingly concerned about the health of populations of color, especially African Americans. A survey was administered in African American churches in two communities (Wichita, KS and Tuscaloosa, AL) to gather information concerning health behaviors and beliefs and to design interventions that might improve their health status. The study examined the homogeneity of attitudes, beliefs, and behaviors across these samples and to determine the readiness to change using the Transtheoritical Model. Individuals completed a 33-item survey: 6 demographic questions, 12 health behavior questions, 8 health belief questions, 3 church attendance questions, and 4 church-based health promotion program questions. The total sample consisted of 429 respondents. The results showed that 93% of respondents have had their blood pressure checked in the past 2 years. While only 44% indicated eating a high fiber diet during the week. Thirty percent of respondents indicated that their health was dependent on fate or destiny. The findings from this study confirm that among both samples that health attitudes, beliefs, and behaviors need to be changed to lower the risk of certain diseases and disorders. The findings also indicate that both samples have similar beliefs about health that may have important implications for disseminating information to the community. Innovative and culturally sensitive programs are needed in the African American community if disparities in health are to diminish.

A selective medium for the isolation of Microbacterium species in oral cavities.

PubMed

Tsuzukibashi, Osamu; Uchibori, Satoshi; Kobayashi, Taira; Saito, Masanori; Umezawa, Koji; Ohta, Mitsuhiro; Shinozaki-Kuwahara, Noriko

2015-09-01

The genus Microbacterium has been isolated from the environment, dairy goods, and human clinical specimens. Although, in our previous studies, some Microbacterium species were infrequently detected in oral samples collected from humans, there is currently no report that these organisms, which are capable of causing serious systemic infections, were isolated from the human oral cavity. The aim of the present study was to develop a selective medium to isolate the representative Microbacterium species most frequently detected in human clinical specimens, and reveal the distribution of individual Microbacterium species in the oral cavity. The growth recoveries of representative Microbacterium species on the selective medium, designated as MSM, were sufficient. Moreover, the growth of other representative oral bacteria was markedly inhibited on the selective medium. The proportion of Microbacterium species in the saliva samples of 60 subjects, 20 of whom were removable denture wearers, was then examined. The proportion of these organisms was also examined in environmental samples obtained by swabbing 20 washstands. PCR primers were designed for representative Microbacterium species. The genus Microbacterium was detected in 45% of the saliva and denture plaque samples collected from the twenty removable denture wearers, but was absent in the saliva of the forty non-denture wearers. On the other hand, these organisms were detected in all environmental samples. The genus Microbacterium accounted for 0.00003%, 0.0001%, and 12.6% of the total cultivable bacteria number on the BHI medium in the saliva and denture plaque samples of removable denture wearers and in the environmental samples, respectively. The most predominant Microbacterium species in all positive samples was Microbacterium oxydans. These results indicated that the genus Microbacterium was not a part of the normal flora in the human oral cavity, except for subjects wearing dentures that were contaminated by the environment, and the selective medium, designated as MSM, was useful for isolating Microbacterium species, which are frequently encountered in human clinical specimens, from the various samples. Copyright © 2015 Elsevier B.V. All rights reserved.

Methods of Sensing Land Pollution from Sanitary Landfills

NASA Technical Reports Server (NTRS)

Nosanov, Myron Ellis; Bowerman, Frank R.

1971-01-01

Major cities are congested and large sites suitable for landfill development are limited. Methane and other gases are produced at most sanitary landfills and dumps. These gases may migrate horizontally and vertically and have caused fatalities. Monitoring these gases provides data bases for design and construction of safe buildings on and adjacent to landfills. Methods of monitoring include: (1) a portable combustible gas indicator; and (2) glass flasks valved to allow simultaneous exhaust of the flask and aspiration of the sample into the flask. Samples are drawn through tubing from probes as deep as twenty-five feet below the surface.

Sampling and Data Analysis for Environmental Microbiology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Murray, Christopher J.

2001-06-01

A brief review of the literature indicates the importance of statistical analysis in applied and environmental microbiology. Sampling designs are particularly important for successful studies, and it is highly recommended that researchers review their sampling design before heading to the laboratory or the field. Most statisticians have numerous stories of scientists who approached them after their study was complete only to have to tell them that the data they gathered could not be used to test the hypothesis they wanted to address. Once the data are gathered, a large and complex body of statistical techniques are available for analysis ofmore » the data. Those methods include both numerical and graphical techniques for exploratory characterization of the data. Hypothesis testing and analysis of variance (ANOVA) are techniques that can be used to compare the mean and variance of two or more groups of samples. Regression can be used to examine the relationships between sets of variables and is often used to examine the dependence of microbiological populations on microbiological parameters. Multivariate statistics provides several methods that can be used for interpretation of datasets with a large number of variables and to partition samples into similar groups, a task that is very common in taxonomy, but also has applications in other fields of microbiology. Geostatistics and other techniques have been used to examine the spatial distribution of microorganisms. The objectives of this chapter are to provide a brief survey of some of the statistical techniques that can be used for sample design and data analysis of microbiological data in environmental studies, and to provide some examples of their use from the literature.« less

RosettaAntibodyDesign (RAbD): A general framework for computational antibody design

PubMed Central

Adolf-Bryfogle, Jared; Kalyuzhniy, Oleks; Kubitz, Michael; Hu, Xiaozhen; Adachi, Yumiko; Schief, William R.

2018-01-01

A structural-bioinformatics-based computational methodology and framework have been developed for the design of antibodies to targets of interest. RosettaAntibodyDesign (RAbD) samples the diverse sequence, structure, and binding space of an antibody to an antigen in highly customizable protocols for the design of antibodies in a broad range of applications. The program samples antibody sequences and structures by grafting structures from a widely accepted set of the canonical clusters of CDRs (North et al., J. Mol. Biol., 406:228–256, 2011). It then performs sequence design according to amino acid sequence profiles of each cluster, and samples CDR backbones using a flexible-backbone design protocol incorporating cluster-based CDR constraints. Starting from an existing experimental or computationally modeled antigen-antibody structure, RAbD can be used to redesign a single CDR or multiple CDRs with loops of different length, conformation, and sequence. We rigorously benchmarked RAbD on a set of 60 diverse antibody–antigen complexes, using two design strategies—optimizing total Rosetta energy and optimizing interface energy alone. We utilized two novel metrics for measuring success in computational protein design. The design risk ratio (DRR) is equal to the frequency of recovery of native CDR lengths and clusters divided by the frequency of sampling of those features during the Monte Carlo design procedure. Ratios greater than 1.0 indicate that the design process is picking out the native more frequently than expected from their sampled rate. We achieved DRRs for the non-H3 CDRs of between 2.4 and 4.0. The antigen risk ratio (ARR) is the ratio of frequencies of the native amino acid types, CDR lengths, and clusters in the output decoys for simulations performed in the presence and absence of the antigen. For CDRs, we achieved cluster ARRs as high as 2.5 for L1 and 1.5 for H2. For sequence design simulations without CDR grafting, the overall recovery for the native amino acid types for residues that contact the antigen in the native structures was 72% in simulations performed in the presence of the antigen and 48% in simulations performed without the antigen, for an ARR of 1.5. For the non-contacting residues, the ARR was 1.08. This shows that the sequence profiles are able to maintain the amino acid types of these conserved, buried sites, while recovery of the exposed, contacting residues requires the presence of the antigen-antibody interface. We tested RAbD experimentally on both a lambda and kappa antibody–antigen complex, successfully improving their affinities 10 to 50 fold by replacing individual CDRs of the native antibody with new CDR lengths and clusters. PMID:29702641

RosettaAntibodyDesign (RAbD): A general framework for computational antibody design.

PubMed

Adolf-Bryfogle, Jared; Kalyuzhniy, Oleks; Kubitz, Michael; Weitzner, Brian D; Hu, Xiaozhen; Adachi, Yumiko; Schief, William R; Dunbrack, Roland L

2018-04-01

A structural-bioinformatics-based computational methodology and framework have been developed for the design of antibodies to targets of interest. RosettaAntibodyDesign (RAbD) samples the diverse sequence, structure, and binding space of an antibody to an antigen in highly customizable protocols for the design of antibodies in a broad range of applications. The program samples antibody sequences and structures by grafting structures from a widely accepted set of the canonical clusters of CDRs (North et al., J. Mol. Biol., 406:228-256, 2011). It then performs sequence design according to amino acid sequence profiles of each cluster, and samples CDR backbones using a flexible-backbone design protocol incorporating cluster-based CDR constraints. Starting from an existing experimental or computationally modeled antigen-antibody structure, RAbD can be used to redesign a single CDR or multiple CDRs with loops of different length, conformation, and sequence. We rigorously benchmarked RAbD on a set of 60 diverse antibody-antigen complexes, using two design strategies-optimizing total Rosetta energy and optimizing interface energy alone. We utilized two novel metrics for measuring success in computational protein design. The design risk ratio (DRR) is equal to the frequency of recovery of native CDR lengths and clusters divided by the frequency of sampling of those features during the Monte Carlo design procedure. Ratios greater than 1.0 indicate that the design process is picking out the native more frequently than expected from their sampled rate. We achieved DRRs for the non-H3 CDRs of between 2.4 and 4.0. The antigen risk ratio (ARR) is the ratio of frequencies of the native amino acid types, CDR lengths, and clusters in the output decoys for simulations performed in the presence and absence of the antigen. For CDRs, we achieved cluster ARRs as high as 2.5 for L1 and 1.5 for H2. For sequence design simulations without CDR grafting, the overall recovery for the native amino acid types for residues that contact the antigen in the native structures was 72% in simulations performed in the presence of the antigen and 48% in simulations performed without the antigen, for an ARR of 1.5. For the non-contacting residues, the ARR was 1.08. This shows that the sequence profiles are able to maintain the amino acid types of these conserved, buried sites, while recovery of the exposed, contacting residues requires the presence of the antigen-antibody interface. We tested RAbD experimentally on both a lambda and kappa antibody-antigen complex, successfully improving their affinities 10 to 50 fold by replacing individual CDRs of the native antibody with new CDR lengths and clusters.

Spatial analysis of the distribution of Spodoptera frugiperda (J.E. Smith) (Lepidoptera: Noctuidae) and losses in maize crop productivity using geostatistics.

PubMed

Farias, Paulo R S; Barbosa, José C; Busoli, Antonio C; Overal, William L; Miranda, Vicente S; Ribeiro, Susane M

2008-01-01

The fall armyworm, Spodoptera frugiperda (J.E. Smith), is one of the chief pests of maize in the Americas. The study of its spatial distribution is fundamental for designing correct control strategies, improving sampling methods, determining actual and potential crop losses, and adopting precise agricultural techniques. In São Paulo state, Brazil, a maize field was sampled at weekly intervals, from germination through harvest, for caterpillar densities, using quadrates. In each of 200 quadrates, 10 plants were sampled per week. Harvest weights were obtained in the field for each quadrate, and ear diameters and lengths were also sampled (15 ears per quadrate) and used to estimate potential productivity of the quadrate. Geostatistical analyses of caterpillar densities showed greatest ranges for small caterpillars when semivariograms were adjusted for a spherical model that showed greatest fit. As the caterpillars developed in the field, their spatial distribution became increasingly random, as shown by a model adjusted to a straight line, indicating a lack of spatial dependence among samples. Harvest weight and ear length followed the spherical model, indicating the existence of spatial variability of the production parameters in the maize field. Geostatistics shows promise for the application of precise methods in the integrated control of pests.

Young Stellar Populations in MYStIX Star-forming Regions: Candidate Protostars

NASA Astrophysics Data System (ADS)

Romine, Gregory; Feigelson, Eric D.; Getman, Konstantin V.; Kuhn, Michael A.; Povich, Matthew S.

2016-12-01

The Massive Young Star-Forming Complex in Infrared and X-ray (MYStIX) project provides a new census on stellar members of massive star-forming regions within 4 kpc. Here the MYStIX Infrared Excess catalog and Chandra-based X-ray photometric catalogs are mined to obtain high-quality samples of Class I protostars using criteria designed to reduce extragalactic and Galactic field star contamination. A total of 1109 MYStIX Candidate Protostars (MCPs) are found in 14 star-forming regions. Most are selected from protoplanetary disk infrared excess emission, but 20% are found from their ultrahard X-ray spectra from heavily absorbed magnetospheric flare emission. Two-thirds of the MCP sample is newly reported here. The resulting samples are strongly spatially associated with molecular cores and filaments on Herschel far-infrared maps. This spatial agreement and other evidence indicate that the MCP sample has high reliability with relatively few “false positives” from contaminating populations. But the limited sensitivity and sparse overlap among the infrared and X-ray subsamples indicate that the sample is very incomplete with many “false negatives.” Maps, tables, and source descriptions are provided to guide further study of star formation in these regions. In particular, the nature of ultrahard X-ray protostellar candidates without known infrared counterparts needs to be elucidated.

Tape Cassette Bacteria Detection System

NASA Technical Reports Server (NTRS)

1973-01-01

The design, fabrication, and testing of an automatic bacteria detection system with a zero-g capability and based on the filter-capsule approach is described. This system is intended for monitoring the sterility of regenerated water in a spacecraft. The principle of detection is based on measuring the increase in chemiluminescence produced by the action of bacterial porphyrins (i.e., catalase, cytochromes, etc.) on a luminol-hydrogen peroxide mixture. Since viable as well as nonviable organisms initiate this luminescence, viable organisms are detected by comparing the signal of an incubated water sample with an unincubated control. Higher signals for the former indicate the presence of viable organisms. System features include disposable sealed sterile capsules, each containing a filter membrane, for processing discrete water samples and a tape transport for moving these capsules through a processing sequence which involves sample concentration, nutrient addition, incubation, a 4 Molar Urea wash and reaction with luminol-hydrogen peroxide in front of a photomultiplier tube. Liquids are introduced by means of a syringe needle which pierces a rubber septum contained in the wall of the capsule. Detection thresholds obtained with this unit towards E. coli and S. marcescens assuming a 400 ml water sample are indicated.

Children's views on microneedle use as an alternative to blood sampling for patient monitoring.

PubMed

Mooney, Karen; McElnay, James C; Donnelly, Ryan F

2014-10-01

To explore children's views on microneedle use for this population, particularly as an alternative approach to blood sampling, in monitoring applications, and so, examine the acceptability of this approach to children. Focus groups were conducted with children (aged 10-14 years) in a range of schools across Northern Ireland. Convenience sampling was employed, i.e. children involved in a university-directed community-outreach project (Pharmacists in Schools) were recruited. A total of 86 children participated in 13 focus groups across seven schools in Northern Ireland. A widespread disapproval for blood sampling was evident, with pain, blood and traditional needle visualisation particularly unpopular aspects. In general, microneedles had greater visual acceptability and caused less fear. A patch-based design enabled minimal patient awareness of the monitoring procedure, with personalised designs, e.g. cartoon themes, favoured. Children's concerns included possible allergy and potential inaccuracies with this novel approach; however, many had confidence in the judgement of healthcare professionals if deeming this technique appropriate. They considered paediatric patient education critical for acceptance of this new approach and called for an alternative name, without any reference to 'needles'. The findings presented here support the development of blood-free, minimally invasive techniques and provide an initial indication of microneedle acceptability in children, particularly for monitoring purposes. A proactive response to these unique insights should enable microneedle array design to better meet the needs of this end-user group. Further work in this area is recommended to ascertain the perspectives of a purposive sample of children with chronic conditions who require regular monitoring. © 2013 Royal Pharmaceutical Society.

Assessment of optimum threshold and particle shape parameter for the image analysis of aggregate size distribution of concrete sections

NASA Astrophysics Data System (ADS)

Ozen, Murat; Guler, Murat

2014-02-01

Aggregate gradation is one of the key design parameters affecting the workability and strength properties of concrete mixtures. Estimating aggregate gradation from hardened concrete samples can offer valuable insights into the quality of mixtures in terms of the degree of segregation and the amount of deviation from the specified gradation limits. In this study, a methodology is introduced to determine the particle size distribution of aggregates from 2D cross sectional images of concrete samples. The samples used in the study were fabricated from six mix designs by varying the aggregate gradation, aggregate source and maximum aggregate size with five replicates of each design combination. Each sample was cut into three pieces using a diamond saw and then scanned to obtain the cross sectional images using a desktop flatbed scanner. An algorithm is proposed to determine the optimum threshold for the image analysis of the cross sections. A procedure was also suggested to determine a suitable particle shape parameter to be used in the analysis of aggregate size distribution within each cross section. Results of analyses indicated that the optimum threshold hence the pixel distribution functions may be different even for the cross sections of an identical concrete sample. Besides, the maximum ferret diameter is the most suitable shape parameter to estimate the size distribution of aggregates when computed based on the diagonal sieve opening. The outcome of this study can be of practical value for the practitioners to evaluate concrete in terms of the degree of segregation and the bounds of mixture's gradation achieved during manufacturing.

Design and Assessment of Online, Interactive Tutorials That Teach Science Process Skills.

PubMed

Kramer, Maxwell; Olson, Dalay; Walker, J D

2018-06-01

Explicit emphasis on teaching science process skills leads to both gains in the skills themselves and, strikingly, deeper understanding of content. Here, we created and tested a series of online, interactive tutorials with the goal of helping undergraduate students develop science process skills. We designed the tutorials in accordance with evidence-based multimedia design principles and student feedback from usability testing. We then tested the efficacy of the tutorials in an introductory undergraduate biology class. On the basis of a multivariate ordinary least-squares regression model, students who received the tutorials are predicted to score 0.82 points higher on a 15-point science process skill assessment than their peers who received traditional textbook instruction on the same topic. This moderate but significant impact indicates that well-designed online tutorials can be more effective than traditional ways of teaching science process skills to undergraduate students. We also found trends that suggest the tutorials are especially effective for nonnative English-speaking students. However, due to a limited sample size, we were unable to confirm that these trends occurred due to more than just variation in the student group sampled.

Leveraging prior quantitative knowledge in guiding pediatric drug development: a case study.

PubMed

Jadhav, Pravin R; Zhang, Jialu; Gobburu, Jogarao V S

2009-01-01

The manuscript presents the FDA's focus on leveraging prior knowledge in designing informative pediatric trial through this case study. In developing written request for Drug X, an anti-hypertensive for immediate blood pressure (BP) control, the sponsor and FDA conducted clinical trial simulations (CTS) to design trial with proper sample size and support the choice of dose range. The objective was to effectively use prior knowledge from adult patients for drug X, pediatric data from Corlopam (approved for a similar indication) trial and general experience in developing anti-hypertensive agents. Different scenarios governing the exposure response relationship in the pediatric population were simulated to perturb model assumptions. The choice of scenarios was based on the past observation that pediatric population is less responsive and sensitive compared with adults. The conceptual framework presented here should serve as an example on how the industry and FDA scientists can collaborate in designing the pediatric exclusivity trial. Using CTS, inter-disciplinary scientists with the sponsor and FDA can objectively discuss the choice of dose range, sample size, endpoints and other design elements. These efforts are believed to yield plausible trial design, qrational dosing recommendations and useful labeling information in pediatrics. Published in 2009 by John Wiley & Sons, Ltd.

Facilitating the learning process in design-based learning practices: an investigation of teachers' actions in supervising students

NASA Astrophysics Data System (ADS)

Gómez Puente, S. M.; van Eijck, M.; Jochems, W.

2013-11-01

Background: In research on design-based learning (DBL), inadequate attention is paid to the role the teacher plays in supervising students in gathering and applying knowledge to design artifacts, systems, and innovative solutions in higher education. Purpose: In this study, we examine whether teacher actions we previously identified in the DBL literature as important in facilitating learning processes and student supervision are present in current DBL engineering practices. Sample: The sample (N=16) consisted of teachers and supervisors in two engineering study programs at a university of technology: mechanical and electrical engineering. We selected randomly teachers from freshman and second-year bachelor DBL projects responsible for student supervision and assessment. Design and method: Interviews with teachers, and interviews and observations of supervisors were used to examine how supervision and facilitation actions are applied according to the DBL framework. Results: Major findings indicate that formulating questions is the most common practice seen in facilitating learning in open-ended engineering design environments. Furthermore, other DBL actions we expected to see based upon the literature were seldom observed in the coaching practices within these two programs. Conclusions: Professionalization of teachers in supervising students need to include methods to scaffold learning by supporting students in reflecting and in providing formative feedback.

Dragonfly: Investigating the Surface Composition of Titan

NASA Technical Reports Server (NTRS)

Brinckerhoff, W. B.; Lawrence, D. J.; Barnes, J. W.; Lorenz, R. D.; Horst, S. M.; Zacny, K.; Freissinet, C.; Parsons, A. M.; Turtle, E. P.; Trainer, M. G.;

Gender-Related Discourses as Mediators in the Association between Internalization of the Thin-Body Ideal and Indicants of Body Dissatisfaction and Disordered Eating

ERIC Educational Resources Information Center

Morrison, Todd G.; Sheahan, Emer E.

2009-01-01

This study examined whether the gender-related discourses of self-objectification, self-silencing, and anger suppression mediated the association between internalization of the thin-body ideal and body dissatisfaction and eating pathology. We employed a cross-sectional design to study both university (n = 140) and community (n = 76) samples of…

Monitoring Indicators of Scholarly Language: A Progress-Monitoring Instrument for Measuring Narrative Discourse Skills

ERIC Educational Resources Information Center

Gillam, Sandra Laing; Gillam, Ronald B.; Fargo, Jamison D.; Olszewski, Abbie; Segura, Hugo

2017-01-01

The purpose of this study was to assess the basic psychometric properties of a progress-monitoring tool designed to measure narrative discourse skills in school-age children with language impairments (LI). A sample of 109 children with LI between the ages of 5 years 7 months and 9 years 9 months completed the "Test of Narrative Language"…

Achievement of Abraham Maslow's Needs Hierarchy Theory among Teachers: Implications for Human Resource Management in the Secondary School System in Rivers State

ERIC Educational Resources Information Center

Adiele, E.E.; Abraham, Nath. M.

2013-01-01

The study investigated the achievement of Abraham Maslow's need hierarchy theory among secondary school teachers in Rivers State. A 25-item questionnaire was designed, validated and administered on a sample of 500 teachers drawn from 245 secondary schools in Rivers State. The result revealed that secondary school teachers indicated insignificant…

Self-healing fuse development

NASA Technical Reports Server (NTRS)

Jones, N. D.; Kinsinger, R. E.; Harris, L. P.

1973-01-01

The mercury-filled self-healing fuses developed for this program afford very good protection from circuit faults with rapid reclosure. Fuse performance and design parameters have been characterized. Life tests indicate a capability of 500 fuse operations. Fuse ratings are 150 v at 5, 15, 25 and 50 circuit A. A series of sample fuses using alumina and beryllia insulation have been furnished to NASA for circuit evaluation.

Fictional privacy among Facebook users.

PubMed

Lemieux, Robert

2012-08-01

The current study involved the creation of a fictional Facebook account with limited information and was designed to assess whether participants would accept the friendship of an ambiguous, unknown person. Results indicated that 325 Facebook members (72% of the sample) willingly accepted the friendship of the unknown individual. Results are discussed in relation to privacy concerns, norms of reciprocity, and allowing access to potentially embarrassing information and/or pictures.

The Prospect of Responsive Spacecraft Using Aeroassisted, Trans-Atmospheric Maneuvers

DTIC Science & Technology

2014-06-19

skip entry aeroassisted maneuvers. By overflying a geographically diverse set of sample ground targets, comparative analysis indicates a significant... analysis . Depending on the chosen re- circularization altitude, the coupled optimal design can achieve an inclination change of 19.91 deg with 50-85...third phase also introduces the “Maneuver Performance Number” as a dimensionless means of comparative effectiveness analysis for both exo- and trans

First Report on a Randomized Investigation of Antimicrobial Resistance in Fecal Indicator Bacteria from Livestock, Poultry, and Humans in Tanzania.

PubMed

Katakweba, Abdul A S; Muhairwa, Amandus P; Lupindu, Athumani M; Damborg, Peter; Rosenkrantz, Jesper T; Minga, Uswege M; Mtambo, Madundo M A; Olsen, John E

2018-04-01

This study provides an estimate of antimicrobial resistance in intestinal indicator bacteria from humans (n = 97) and food animals (n = 388) in Tanzania. More than 70% of all fecal samples contained tetracycline (TE), sulfamethoxazole (STX), and ampicillin (AMP)-resistant coliforms, while cefotaxime (CTX)-resistant coliforms were observed in 40% of all samples. The average Log 10 colony forming units/g of CTX-resistant coliforms in samples from humans were 2.20. Of 390 Escherichia coli tested, 66.4% were resistant to TE, 54.9% to STX, 54.9% to streptomycin, and 36.4% to CTX. Isolates were commonly (65.1%) multiresistant. All CTX-resistant isolates contained bla CTX-M gene type. AMP- and vancomycin-resistant enterococci were rare, and the average concentrations in positive samples were low (log 10 0.9 and 0.4, respectively). A low-to-moderate resistance (2.1-15%) was detected in 240 enterococci isolates to the drugs tested, except for rifampicin resistance (75.2% of isolates). The average number of sulII gene copies varied between Log 10 5.37 and 5.68 with no significant difference between sample source, while cattle had significantly higher number of tetW genes than humans. These findings, based on randomly obtained samples, will be instrumental in designing antimicrobial resistance (AMR) intervention strategies for Tanzania.

Heritability of lifetime ecstasy use.

PubMed

Verweij, Karin J H; Treur, Jorien L; Vreeker, Annabel; Brunt, Tibor M; Willemsen, Gonneke; Boomsma, Dorret I; Vink, Jacqueline M

2017-09-01

Ecstasy is a widely used psychoactive drug that users often take because they experience positive effects such as increased euphoria, sociability, elevated mood, and heightened sensations. Ecstasy use is not harmless and several immediate and long term side effects have been identified. Lifetime ecstasy use is likely to be partly influenced by genetic factors, but no twin study has determined the heritability. Here, we apply a classical twin design to a large sample of twins and siblings to estimate the heritability of lifetime ecstasy use. The sample comprised 8500 twins and siblings aged between 18 and 45 years from 5402 families registered at the Netherlands Twin Registry. In 2013-2014 participants filled out a questionnaire including a question whether they had ever used ecstasy. We used the classical twin design to partition the individual differences in liability to ecstasy use into that due to genetic, shared environmental, and residual components. Overall, 10.4% of the sample had used ecstasy during their lifetime, with a somewhat higher prevalence in males than females. Twin modelling indicated that individual differences in liability to lifetime ecstasy use are for 74% due to genetic differences between individuals, whereas shared environmental and residual factors explain a small proportion of its liability (5% and 21%, respectively). Although heritability estimates appeared to be higher for females than males, this difference was not significant. Lifetime ecstasy use is a highly heritable trait, which indicates that some people are genetically more vulnerable to start using ecstasy than others. Copyright © 2017. Published by Elsevier B.V.

Fostering Career Awareness in Elementary Schools: Evaluation of an Intervention Proposal.

PubMed

Carvalho, Renato Gomes; Pocinho, Margarida; Fernandes, Débora

2018-05-17

Research literature has been increasingly focusing on children's career development, especially when school contexts are considered. In the present study, we evaluate the efficacy of a short-term intervention program designed to foster career awareness in elementary school. The sample consisted of 155 Portuguese fifth- and sixth-grade students, aged nine to fifteen years old (M = 11, SD = 1). With a quasi-experimental design, the sample was divided into two groups, namely, the participants in the program and the controls. We used the Career Awareness Scale for Children and a sociodemographic survey. Analyses of covariance indicated a moderate effect of the participation in the program in students' career awareness (ηp2 = .06, p = .003). The results are discussed considering the school as a key context for career education aiming at promoting students' adaptability and involvement in the construction of their life pathways.

Designer babies on tap? Medical students' attitudes to pre-implantation genetic screening.

PubMed

Meisenberg, Gerhard

2009-03-01

This paper describes two studies about the determinants of attitudes to pre-implantation genetic screening in a multicultural sample of medical students from the United States. Sample sizes were 292 in study 1 and 1464 in study 2. Attitudes were of an undifferentiated nature, but respondents did make a major distinction between use for disease prevention and use for enhancement. No strong distinctions were made between embryo selection and germ line gene manipulations, and between somatic gene therapy and germ line gene manipulations. Religiosity was negatively associated with acceptance of "designer baby" technology for Christians and Muslims but not Hindus. However, the strongest and most consistent influence was an apparently moralistic stance against active and aggressive interference with natural processes in general. Trust in individuals and institutions was unrelated to acceptance of the technology, indicating that fear of abuse by irresponsible individuals and corporations is not an important determinant of opposition.

Linear-dichroic infrared spectroscopy—Validation and experimental design of the new orientation technique of solid samples as suspension in nematic liquid crystal

NASA Astrophysics Data System (ADS)

Ivanova, B. B.; Simeonov, V. D.; Arnaudov, M. G.; Tsalev, D. L.

2007-05-01

A validation of the developed new orientation method of solid samples as suspension in nematic liquid crystal (NLC), applied in linear-dichroic infrared (IR-LD) spectroscopy has been carried out using a model system DL-isoleucine ( DL-isoleu). Accuracy, precision and the influence of the liquid crystal medium on peak positions and integral absorbances of guest molecules have been presented. Optimization of experimental conditions has been performed as well. An experimental design for quantitative evaluation of the impact of four input factors: the number of scans, the rubbing-out of KBr-pellets, the amount of studied compounds included in the liquid crystal medium and the ratios of Lorentzian to Gaussian peak functions in the curve fitting procedure on the spectroscopic signal at five different frequencies, indicating important specifities of the system has been studied.

Two dimensional electron systems for solid state quantum computation

NASA Astrophysics Data System (ADS)

Mondal, Sumit

Two dimensional electron systems based on GaAs/AlGaAs heterostructures are extremely useful in various scientific investigations of recent times including the search for quantum computational schemes. Although significant strides have been made over the past few years to realize solid state qubits on GaAs/AlGaAs 2DEGs, there are numerous factors limiting the progress. We attempt to identify factors that have material and design-specific origin and develop ways to overcome them. The thesis is divided in two broad segments. In the first segment we describe the realization of a new field-effect induced two dimensional electron system on GaAs/AlGaAs heterostructure where the novel device-design is expected to suppress the level of charge noise present in the device. Modulation-doped GaAs/AlGaAs heterostructures are utilized extensively in the study of quantum transport in nanostructures, but charge fluctuations associated with remote ionized dopants often produce deleterious effects. Electric field-induced carrier systems offer an attractive alternative if certain challenges can be overcome. We demonstrate a field-effect transistor in which the active channel is locally devoid of modulation-doping, but silicon dopant atoms are retained in the ohmic contact region to facilitate low-resistance contacts. A high quality two-dimensional electron gas is induced by a field-effect that is tunable over a density range of 6.5x10 10cm-2 to 2.6x1011cm-2 . Device design, fabrication, and low temperature (T=0.3K) characterization results are discussed. The demonstrated device-design overcomes several existing limitations in the fabrication of field-induced 2DEGs and might find utility in hosting nanostructures required for making spin qubits. The second broad segment describes our effort to correlate transport parameters measured at T=0.3K to the strength of the fractional quantum Hall state observed at nu=5/2 in the second Landau level of high-mobility GaAs/AlGaAs two dimensional electron systems. In an ultrapure two dimensional electron system (2DES) subjected to high magnetic field and very low temperatures, a large number of many-body ground states can emerge in a purely quantum phenomenon called the Fractional quantum Hall Effect (FQHE). The fractional state at nu=5/2 has drawn significant interest in recent times because of its predicted non-abelian excitations that can be utilized in constructing topologically protected quantum bits. In spite of having made significant advances in this direction, progress is hindered due to the fragility of this exotic state characterized by a small energy gap which puts very stringent requirements on the sample quality and the temperature scale. It is believed that the nu=5/2 activation gap is masked by disorders present in the sample which causes the experimentally observed gap to appear much smaller than the theoretically predicted intrinsic gap originating from purely electron-electron interactions in the clean-limit. Hence categorization of samples based on the strength of the nu=5/2 state hinges on the efficient quantification of disorder which is not a directly measurable quantity. Historically the zero-field transport mobility has been identified as the measure of disorder present in the sample. However careful comparison of data originating in our measurements with existing literature reveals that mobility is rather a weak indicator of the quality of FQHE in the 2nd Landau level and fails to reliably predict the nu=5/2 activation gap in a sample. In the absence of a single reliable indicator of sample quality in the 2nd Landau level, we propose a resistivity measured at nu=5/2 at T=0.3K as an alternative metric to characterize samples. Preliminary measurements involving a limited number of samples indicate that a resistivity measured at nu=5/2 might be better correlated with the nu=5/2 gap than mobility. Results also call for a more holistic approach in sample characterization by taking into consideration the heterostructure design while predicting sample quality. The possibility of quantum scattering time being an indicator of the strength of the nu=5/2 gap was investigated. The existing method of extracting quantum lifetime from the low-field Shubnikov-de Haas oscillations leads to unreliable extraction of quantum lifetime in high-mobility two dimensional electron samples potentially because an underlying assumption in the method that the amplitude of the density of states oscillations at low magnetic fields is negligible compared to the zero-field density of states might not hold true in case of high-mobility 2DES. A modified method was developed by relaxing the assumption which resulted in meaningful extraction of quantum lifetimes in all the high-mobility samples probed in the study. A correlation between the extracted quantum lifetime and the nu=5/2 activation gap was not discovered within the limited set of samples probed.

Nuclear forensic analysis of uranium oxide powders interdicted in Victoria, Australia

DOE PAGES

Kristo, Michael Joseph; Keegan, Elizabeth; Colella, Michael; ...

2015-04-13

Nuclear forensic analysis was conducted on two uranium samples confiscated during a police investigation in Victoria, Australia. The first sample, designated NSR-F-270409-1, was a depleted uranium powder of moderate purity (~1000 μg/g total elemental impurities). The chemical form of the uranium was a compound similar to K 2(UO 2) 3O 4·4H 2O. While aliquoting NSR-F-270409-1 for analysis, the body and head of a Tineid moth was discovered in the sample. The second sample, designated NSR-F-270409-2, was also a depleted uranium powder. It was of reasonably high purity (~380 μg/g total elemental impurities). The chemical form of the uranium was primarilymore » UO 3·2H 2O, with minor phases of U 3O 8 and UO 2. While aliquoting NSR-F-270409-2 for analysis, a metal staple of unknown origin was discovered in the sample. The presence of 236U and 232U in both samples indicates that the uranium feed stocks for these samples experienced a neutron flux at some point in their history. The reactor burn-up calculated from the isotopic composition of the uranium is consistent with that of spent fuel from natural uranium (NU) fueled Pu production. These nuclear forensic conclusions allow us to categorically exclude Australia as the origin of the material and greatly reduce the number of candidate sources.« less

Selenium analysis by an integrated microwave digestion-needle trap device with hydride sorption on carbon nanotubes and electrothermal atomic absorption spectrometry determination

NASA Astrophysics Data System (ADS)

Maratta Martínez, Ariel; Vázquez, Sandra; Lara, Rodolfo; Martínez, Luis Dante; Pacheco, Pablo

2018-02-01

An integrated microwave assisted digestion (MW-AD) - needle trap device (NTD) for selenium determination in grape pomace samples is presented. The NTD was filled with oxidized multiwall carbon nanotubes (oxMWCNTS) where Se hydrides were preconcentrated. Determination was carried out by flow injection-electrothermal atomic absorption spectrometry (FI-ETAAS). The variables affecting the system were established by a multivariate design (Plackett Burman), indicating that the following variables significantly affect the system: sample amount, HNO3 digestion solution concentration, NaBH4 volume and elution volume. A Box-Behnken design was implemented to determine the optimized values of these variables. The system improved Se atomization in the graphite furnace, since only trapped hydrides reached the graphite furnace, and the pyrolysis stage was eliminated according to the aqueous matrix of the eluate. Under optimized conditions the system reached a limit of quantification of 0.11 μg kg- 1, a detection limit of 0.032 μg kg- 1, a relative standard deviation of 4% and a preconcentration factor (PF) of 100, reaching a throughput sample of 5 samples per hour. Sample analysis show Se concentrations between 0.34 ± 0.03 μg kg- 1 to 0.48 ± 0.03 μg kg- 1 in grape pomace. This system provides minimal reagents and sample consumption, eliminates discontinuous stages between samples processing reaching a simpler and faster Se analysis.

Design and preliminary analysis of a vaginal inserter for speculum-free cervical cancer screening

PubMed Central

Agudogo, Júlia; Krieger, Marlee S.; Miros, Robert; Proeschold-Bell, Rae Jean; Schmitt, John W.; Ramanujam, Nimmi

2017-01-01

Objective Cervical cancer screening usually requires use of a speculum to provide a clear view of the cervix. The speculum is one potential barrier to screening due to fear of pain, discomfort and embarrassment. The aim of this paper is to present and demonstrate the feasibility of a tampon-sized inserter and the POCkeT Colposcope, a miniature pen sized-colposcope, for comfortable, speculum-free and potentially self-colposcopy. Study design We explored different designs using 3D computer-aided design (CAD) software and performed mechanical testing simulations on each. Designs were rapid prototyped and tested using a custom vaginal phantom across a range of vaginal pressures and uterine tilts to select an optimal design. Two final designs were tested with fifteen volunteers to assess cervix visualization, comfort and usability compared to the speculum and the optimal design, the curved-tip inserter, was selected for testing in volunteers. Results We present a vaginal inserter as an alternative to the standard speculum for use with the POCkeT Colposcope. The device has a slim tubular body with a funnel-like curved tip measuring approximately 2.5 cm in diameter. The inserter has a channel through which a 2 megapixel (MP) mini camera with LED illumination fits to enable image capture. Mechanical finite element testing simulations with an applied pressure of 15 cm H2O indicated a high factor of safety (90.9) for the inserter. Testing of the device with a custom vaginal phantom, across a range of supine vaginal pressures and uterine tilts (retroverted, anteverted and sideverted), demonstrated image capture with a visual area comparable to the speculum for a normal/axial positioned uteri and significantly better than the speculum for anteverted and sideverted uteri (p<0.00001). Volunteer studies with self-insertion and physician-assisted cervix image capture showed adequate cervix visualization for 83% of patients. In addition, questionnaire responses from volunteers indicated a 92.3% overall preference for the inserter over the speculum and all indicated that the inserter was more comfortable than the speculum. The inserter provides a platform for self-cervical cancer screening and also enables acetic acid/Lugol’s iodine application and insertion of swabs for Pap smear sample collection. Conclusion This study demonstrates the feasibility of an inserter and miniature-imaging device for comfortable cervical image capture of women with potential for synergistic HPV and Pap smear sample collection. PMID:28562669

A multi-sensor study of the impact of ground-based glaciogenic seeding on clouds and precipitation over mountains in Wyoming. Part II: Seeding impact analysis

NASA Astrophysics Data System (ADS)

Pokharel, Binod; Geerts, Bart; Jing, Xiaoqin; Friedrich, Katja; Ikeda, Kyoko; Rasmussen, Roy

2017-01-01

The AgI Seeding Cloud Impact Investigation (ASCII) campaign, conducted in early 2012 and 2013 over two mountain ranges in southern Wyoming, was designed to examine the impact of ground-based glaciogenic seeding on snow growth in winter orographic clouds. Part I of this study (Pokharel and Geerts, 2016) describes the project design, instrumentation, as well as the ambient atmospheric conditions and macrophysical and microphysical properties of the clouds sampled in ASCII. This paper (Part II) explores how the silver iodide (AgI) seeding affects snow growth in these orographic clouds in up to 27 intensive operation periods (IOPs), depending on the instrument used. In most cases, 2 h without seeding (NOSEED) were followed by 2 h of seeding (SEED). In situ data at flight level (2D-probes) indicate higher concentrations of small snow particles during SEED in convective clouds. The double difference of radar reflectivity Z (SEED - NOSEED in the target region, compared to the same trend in the control region) indicates an increase in Z for the composite of ASCII cases, over either mountain range, and for any of the three radar systems (WCR, MRR, and DOW), each with their own control and target regions, and for an array of snow gauges. But this double difference varies significantly from case to case, which is attributed to uncertainties related to sampling representativeness and to differences in natural trends between control and target regions. We conclude that a sample much larger than ASCII's sample is needed for clear observational evidence regarding the sensitivity of seeding efficacy to atmospheric and cloud conditions.

In vitro validation of a shape-optimized fiber-reinforced dental bridge.

PubMed

Chen, YungChung; Li, Haiyan; Fok, Alex

2011-12-01

To improve its mechanical performance, structural optimization had been used in a previous study to obtain an alternative design for a 3-unit inlay-retained fiber-reinforced composite (FRC) dental bridge. In that study, an optimized layout of the FRC substructure had been proposed to minimize stresses in the veneering composite and interfacial stresses between the composite and substructure. The current work aimed to validate in vitro the improved fracture resistance of the optimized design. All samples for the 3-unit inlay-retained FRC dental bridge were made with glass-fibers (FibreKor) as the substructure, surrounded by a veneering composite (GC Gradia). Two different FRC substructure designs were prepared: a conventional (n=20) and an optimized design (n=21). The conventional design was a straight beam linking one proximal box to the other, while the optimized design was a curved beam following the lower outline of the pontic. All samples were loaded to 400N on a universal test machine (MTS 810) with a loading speed of 0.2mm/min. During loading, the force and displacement were recorded. Meanwhile, a two-channel acoustic emission (AE) system was used to monitor the development of cracks during loading. The load-displacement curves of the two groups displayed significant differences. For the conventional design, there were numerous drops in load corresponding to local damage of the sample. For the optimized design, the load curves were much smoother. Cracks were clearly visible on the surface of the conventional group only, and the directions of those cracks were perpendicular to those of the most tensile stresses. Results from the more sensitive AE measurement also showed that the optimized design had, on average, fewer cracking events: 38 versus 2969 in the conventional design. The much lower number of AE events and smoother load-displacement curves indicated that the optimized FRC bridge design had a higher fracture resistance. It is expected that the optimized design will significantly improve the clinical performance of FRC bridges. Copyright © 2011 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Optimization of sample preparation by central composite design for multi-class determination of veterinary drugs in bovine muscle, kidney and liver by ultra-high-performance liquid chromatographic-tandem mass spectrometry.

PubMed

Rizzetti, Tiele M; de Souza, Maiara P; Prestes, Osmar D; Adaime, Martha B; Zanella, Renato

2018-04-25

In this study a simple and fast multi-class method for the determination of veterinary drugs in bovine liver, kidney and muscle was developed. The method employed acetonitrile for extraction followed by clean-up with EMR-Lipid® sorbent and trichloracetic acid. Tests indicated that the use of TCA was most effective when added in the final step of the clean-up procedure instead of during extraction. Different sorbents were tested and optimized using central composite design and the analytes determined by ultra-high-performance liquid chromatographic-tandem mass spectrometry (UHPLC-MS/MS). The method was validated according the European Commission Decision 2002/657 presenting satisfactory results for 69 veterinary drugs in bovine liver and 68 compounds in bovine muscle and kidney. The method was applied in real samples and in proficiency tests and proved to be adequate for routine analysis. Residues of abamectin, doramectin, eprinomectin and ivermectin were found in samples of bovine muscle and only ivermectin in bovine liver. Copyright © 2017 Elsevier Ltd. All rights reserved.

Prokaryotic community profiling of local algae wastewaters using advanced 16S rRNA gene sequencing.

PubMed

Limayem, Alya; Micciche, Andrew; Nayak, Bina; Mohapatra, Shyam

2018-01-01

Algae biomass-fed wastewaters are a promising source of lipid and bioenergy manufacture, revealing substantial end-product investment returns. However, wastewaters would contain lytic pathogens carrying drug resistance detrimental to algae yield and environmental safety. This study was conducted to simultaneously decipher through high-throughput advanced Illumina 16S ribosomal RNA (rRNA) gene sequencing, the cultivable and uncultivable bacterial community profile found in a single sample that was directly recovered from the local wastewater systems. Samples were collected from two previously documented sources including anaerobically digested (AD) municipal wastewater and swine wastewater with algae namely Chlorella spp. in addition to control samples, swine wastewater, and municipal wastewater without algae. Results indicated the presence of a significant level of Bacteria in all samples with an average of approximately 95.49% followed by Archaea 2.34%, in local wastewaters designed for algae cultivation. Taxonomic genus identification indicated the presence of Calothrix, Pseudomonas, and Clostridium as the most prevalent strains in both local municipal and swine wastewater samples containing algae with an average of 17.37, 12.19, and 7.84%, respectively. Interestingly, swine wastewater without algae displayed the lowest level of Pseudomonas strains < 0.1%. The abundance of some Pseudomonas species in wastewaters containing algae indicates potential coexistence between these strains and algae microenvironment, suggesting further investigations. This finding was particularly relevant for the earlier documented adverse effects of some nosocomial Pseudomonas strains on algae growth and their multidrug resistance potential, requiring the development of targeted bioremediation with regard to the beneficial flora.

Erotic and disgust-inducing pictures--differences in the hemodynamic responses of the brain.

PubMed

Stark, Rudolf; Schienle, Anne; Girod, Cornelia; Walter, Bertram; Kirsch, Peter; Blecker, Carlo; Ott, Ulrich; Schäfer, Axel; Sammer, Gebhard; Zimmermann, Mark; Vaitl, Dieter

2005-09-01

The aim of this fMRI study was to explore brain structures that are involved in the processing of erotic and disgust-inducing pictures. The stimuli were chosen to trigger approach and withdrawal tendencies, respectively. By adding sadomasochistic (SM) scenes to the design and examining 12 subjects with and 12 subjects without sadomasochistic preferences, we introduced a picture category that induced erotic pleasure in one sample and disgust in the other sample. Since we also presented neutral pictures, all subjects viewed pictures of four different categories: neutral, disgust-inducing, erotic, and SM erotic pictures. The analysis indicated that several brain structures are commonly involved in the processing of disgust-inducing and erotic pictures (occipital cortex, hippocampus, thalamus, and the amygdala). The ventral striatum was specifically activated when subjects saw highly sexually arousing pictures. This indicates the involvement of the human reward system during the processing of visual erotica.

Clinical validation of the NANDA-I diagnosis of impaired memory in elderly patients.

PubMed

Montoril, Michelle H; Lopes, Marcos Venícios O; Santana, Rosimere F; Sousa, Vanessa Emille C; Carvalho, Priscilla Magalhães O; Diniz, Camila M; Alves, Naiana P; Ferreira, Gabriele L; Fróes, Nathaly Bianka M; Menezes, Angélica P

2016-05-01

The aim of this study was to perform a clinical validation of the defining characteristics of impaired memory (IM) in elderly patients at a long-term care institution. A sample of 123 elderly patients was evaluated with a questionnaire designed to identify IM according to the NANDA-I taxonomy. Accuracy measures were calculated for the total sample and for males and females separately. Sensitivity and specificity values indicated that: (1) inability to learn new skills is useful in screening IM, and (2) forgets to perform a behavior at a scheduled time, forgetfulness, inability to learn new information, inability to recall events, and inability to recall factual information are confirmatory indicators. Specific factors can affect the manifestation of IM by elderly patients. The results may be useful in improving diagnostic accuracy and efficiency of the IM nursing diagnosis. Copyright © 2015 Elsevier Inc. All rights reserved.

NASA/DoD Aerospace knowledge diffusion research project. III - The impact of a sponsor letter on mail survey response rates

NASA Technical Reports Server (NTRS)

Kennedy, John M.; Pinelli, Thomas E.

1990-01-01

The paper describes the impact of two interventions in the design of mail surveys. The interventions were devised to increase response rates and to clarify sample eligibility. To test their effectiveness, interventions occurred at different points in each of three surveys. One intervention was a letter from the research sponsor (NASA) supporting the research. The other intervention was the inclusion of a postcard that could be used by the respondent to indicate that the questionnaire was not appropriate for him/her. The sample was drawn from the membership of the American Institute for Aeronautics and Astronautics research society. The results indicate that the sponsor letter improved response rates under certain conditions described in the paper. The postcards assisted in identifying noneligible persons particularly when they accompanied a pre-survey letter. The implications for survey costs are discussed.

A novel method for sampling the suspended sediment load in the tidal environment using bi-directional time-integrated mass-flux sediment (TIMS) samplers

NASA Astrophysics Data System (ADS)

Elliott, Emily A.; Monbureau, Elaine; Walters, Glenn W.; Elliott, Mark A.; McKee, Brent A.; Rodriguez, Antonio B.

2017-12-01

Identifying the source and abundance of sediment transported within tidal creeks is essential for studying the connectivity between coastal watersheds and estuaries. The fine-grained suspended sediment load (SSL) makes up a substantial portion of the total sediment load carried within an estuarine system and efficient sampling of the SSL is critical to our understanding of nutrient and contaminant transport, anthropogenic influence, and the effects of climate. Unfortunately, traditional methods of sampling the SSL, including instantaneous measurements and automatic samplers, can be labor intensive, expensive and often yield insufficient mass for comprehensive geochemical analysis. In estuaries this issue is even more pronounced due to bi-directional tidal flow. This study tests the efficacy of a time-integrated mass sediment sampler (TIMS) design, originally developed for uni-directional flow within the fluvial environment, modified in this work for implementation the tidal environment under bi-directional flow conditions. Our new TIMS design utilizes an 'L' shaped outflow tube to prevent backflow, and when deployed in mirrored pairs, each sampler collects sediment uniquely in one direction of tidal flow. Laboratory flume experiments using dye and particle image velocimetry (PIV) were used to characterize the flow within the sampler, specifically, to quantify the settling velocities and identify stagnation points. Further laboratory tests of sediment indicate that bidirectional TIMS capture up to 96% of incoming SSL across a range of flow velocities (0.3-0.6 m s-1). The modified TIMS design was tested in the field at two distinct sampling locations within the tidal zone. Single-time point suspended sediment samples were collected at high and low tide and compared to time-integrated suspended sediment samples collected by the bi-directional TIMS over the same four-day period. Particle-size composition from the bi-directional TIMS were representative of the array of single time point samples, but yielded greater mass, representative of flow and sediment-concentration conditions at the site throughout the deployment period. This work proves the efficacy of the modified bi-directional TIMS design, offering a novel tool for collection of suspended sediment in the tidally-dominated portion of the watershed.

Workspace design for crane cabins applying a combined traditional approach and the Taguchi method for design of experiments.

PubMed

Spasojević Brkić, Vesna K; Veljković, Zorica A; Golubović, Tamara; Brkić, Aleksandar Dj; Kosić Šotić, Ivana

2016-01-01

Procedures in the development process of crane cabins are arbitrary and subjective. Since approximately 42% of incidents in the construction industry are linked to them, there is a need to collect fresh anthropometric data and provide additional recommendations for design. In this paper, dimensioning of the crane cabin interior space was carried out using a sample of 64 crane operators' anthropometric measurements, in the Republic of Serbia, by measuring workspace with 10 parameters using nine measured anthropometric data from each crane operator. This paper applies experiments run via full factorial designs using a combined traditional and Taguchi approach. The experiments indicated which design parameters are influenced by which anthropometric measurements and to what degree. The results are expected to be of use for crane cabin designers and should assist them to design a cabin that may lead to less strenuous sitting postures and fatigue for operators, thus improving safety and accident prevention.

A 30 mK, 13.5 T scanning tunneling microscope with two independent tips.

PubMed

Roychowdhury, Anita; Gubrud, M A; Dana, R; Anderson, J R; Lobb, C J; Wellstood, F C; Dreyer, M

2014-04-01

We describe the design, construction, and performance of an ultra-low temperature, high-field scanning tunneling microscope (STM) with two independent tips. The STM is mounted on a dilution refrigerator and operates at a base temperature of 30 mK with magnetic fields of up to 13.5 T. We focus on the design of the two-tip STM head, as well as the sample transfer mechanism, which allows in situ transfer from an ultra high vacuum preparation chamber while the STM is at 1.5 K. Other design details such as the vibration isolation and rf-filtered wiring are also described. Their effectiveness is demonstrated via spectral current noise characteristics and the root mean square roughness of atomic resolution images. The high-field capability is shown by the magnetic field dependence of the superconducting gap of CuxBi2Se3. Finally, we present images and spectroscopy taken with superconducting Nb tips with the refrigerator at 35 mK that indicate that the effective temperature of our tips/sample is approximately 184 mK, corresponding to an energy resolution of 16 μeV.

Interim analyses in 2 x 2 crossover trials.

PubMed

Cook, R J

1995-09-01

A method is presented for performing interim analyses in long term 2 x 2 crossover trials with serial patient entry. The analyses are based on a linear statistic that combines data from individuals observed for one treatment period with data from individuals observed for both periods. The coefficients in this linear combination can be chosen quite arbitrarily, but we focus on variance-based weights to maximize power for tests regarding direct treatment effects. The type I error rate of this procedure is controlled by utilizing the joint distribution of the linear statistics over analysis stages. Methods for performing power and sample size calculations are indicated. A two-stage sequential design involving simultaneous patient entry and a single between-period interim analysis is considered in detail. The power and average number of measurements required for this design are compared to those of the usual crossover trial. The results indicate that, while there is minimal loss in power relative to the usual crossover design in the absence of differential carry-over effects, the proposed design can have substantially greater power when differential carry-over effects are present. The two-stage crossover design can also lead to more economical studies in terms of the expected number of measurements required, due to the potential for early stopping. Attention is directed toward normally distributed responses.

Corrosion behavior of ultrafine-grained AA2024 aluminum alloy produced by cryorolling

NASA Astrophysics Data System (ADS)

Laxman Mani Kanta, P.; Srivastava, V. C.; Venkateswarlu, K.; Paswan, Sharma; Mahato, B.; Das, Goutam; Sivaprasad, K.; Krishna, K. Gopala

2017-11-01

The objectives of this study were to produce ultrafine-grained (UFG) AA2024 aluminum alloy by cryorolling followed by aging and to evaluate its corrosion behavior. Solutionized samples were cryorolled to 85% reduction in thickness. Subsequent aging resulted in a UFG structure with finer precipitates of Al2CuMg in the cryorolled alloy. The (1) solutionized and (2) solutionized and cryorolled samples were uniformly aged at 160°C/24 h and were designated as CGPA and CRPA, respectively; these samples were subsequently subjected to corrosion studies. Potentiodynamic polarization studies in 3.5wt% NaCl solution indicated an increase in corrosion potential and a decrease in corrosion current density for CRPA compared to CGPA. In the case of CRPA, electrochemical impedance spectroscopic studies indicated the presence of two complex passive oxide layers with a higher charge transfer resistance and lower mass loss during intergranular corrosion tests. The improved corrosion resistance of CRPA was mainly attributed to its UFG structure, uniform distribution of fine precipitates, and absence of coarse grain-boundary precipitation and associated precipitate-free zones as compared with the CGPA alloy.

Population structure and relatedness among female Northern Pintails in three California wintering regions

USGS Publications Warehouse

Fleskes, Joseph P.; Fowler, Ada C.; Casazza, Michael L.; Eadie, John M.

2010-01-01

Female Northern Pintails (Anas acuta) were sampled in California's three main Central Valley wintering regions (Sacramento Valley, Suisun Marsh, San Joaquin Valley) during September–October before most regional movements occur and microsatellite and mitochondrial DNA were analyzed to examine population structure and relatedness. Despite reportedly high rates of early-fall pairing and regional fidelity, both sets of markers indicated that there was little overall genetic structuring by region. Pintails from Suisun Marsh did exhibit higher relatedness among individuals and capture groups than in the Sacramento or San Joaquin Valleys, likely reflecting a sample comprised of a greater proportion of local breeders. The lack of genetic structuring among regions indicates that a high degree of movement and interchange occurs among pintails wintering in the Central Valley. Thus, although maintaining the existing distribution of pintails among Central Valley regions is important for other reasons, it does not appear to be critical to retain current patterns of population genetic variation. Because of potential lack of independence among highly related study individuals, researchers should consider regional differences in relatedness when designing sampling schemes and interpreting research findings.

Flexible imaging payload for real-time fluorescent biological imaging in parabolic, suborbital and space analog environments

NASA Astrophysics Data System (ADS)

Bamsey, Matthew T.; Paul, Anna-Lisa; Graham, Thomas; Ferl, Robert J.

2014-10-01

Fluorescent imaging offers the ability to monitor biological functions, in this case biological responses to space-related environments. For plants, fluorescent imaging can include general health indicators such as chlorophyll fluorescence as well as specific metabolic indicators such as engineered fluorescent reporters. This paper describes the Flex Imager a fluorescent imaging payload designed for Middeck Locker deployment and now tested on multiple flight and flight-related platforms. The Flex Imager and associated payload elements have been developed with a focus on 'flexibility' allowing for multiple imaging modalities and change-out of individual imaging or control components in the field. The imaging platform is contained within the standard Middeck Locker spaceflight form factor, with components affixed to a baseplate that permits easy rearrangement and fine adjustment of components. The Flex Imager utilizes standard software packages to simplify operation, operator training, and evaluation by flight provider flight test engineers, or by researchers processing the raw data. Images are obtained using a commercial cooled CCD image sensor, with light-emitting diodes for excitation and a suite of filters that allow biological samples to be imaged over wavelength bands of interest. Although baselined for the monitoring of green fluorescent protein and chlorophyll fluorescence from Arabidopsis samples, the Flex Imager payload permits imaging of any biological sample contained within a standard 10 cm by 10 cm square Petri plate. A sample holder was developed to secure sample plates under different flight profiles while permitting sample change-out should crewed operations be possible. In addition to crew-directed imaging, autonomous or telemetric operation of the payload is also a viable operational mode. An infrared camera has also been integrated into the Flex Imager payload to allow concurrent fluorescent and thermal imaging of samples. The Flex Imager has been utilized to assess, in real-time, the response of plants to novel environments including various spaceflight analogs, including several parabolic flight environments as well as hypobaric plant growth chambers. Basic performance results obtained under these operational environments, as well as laboratory-based tests are described. The Flex Imager has also been designed to be compatible with emerging suborbital platforms.

Multiobjective design of aquifer monitoring networks for optimal spatial prediction and geostatistical parameter estimation

NASA Astrophysics Data System (ADS)

Alzraiee, Ayman H.; Bau, Domenico A.; Garcia, Luis A.

2013-06-01

Effective sampling of hydrogeological systems is essential in guiding groundwater management practices. Optimal sampling of groundwater systems has previously been formulated based on the assumption that heterogeneous subsurface properties can be modeled using a geostatistical approach. Therefore, the monitoring schemes have been developed to concurrently minimize the uncertainty in the spatial distribution of systems' states and parameters, such as the hydraulic conductivity K and the hydraulic head H, and the uncertainty in the geostatistical model of system parameters using a single objective function that aggregates all objectives. However, it has been shown that the aggregation of possibly conflicting objective functions is sensitive to the adopted aggregation scheme and may lead to distorted results. In addition, the uncertainties in geostatistical parameters affect the uncertainty in the spatial prediction of K and H according to a complex nonlinear relationship, which has often been ineffectively evaluated using a first-order approximation. In this study, we propose a multiobjective optimization framework to assist the design of monitoring networks of K and H with the goal of optimizing their spatial predictions and estimating the geostatistical parameters of the K field. The framework stems from the combination of a data assimilation (DA) algorithm and a multiobjective evolutionary algorithm (MOEA). The DA algorithm is based on the ensemble Kalman filter, a Monte-Carlo-based Bayesian update scheme for nonlinear systems, which is employed to approximate the posterior uncertainty in K, H, and the geostatistical parameters of K obtained by collecting new measurements. Multiple MOEA experiments are used to investigate the trade-off among design objectives and identify the corresponding monitoring schemes. The methodology is applied to design a sampling network for a shallow unconfined groundwater system located in Rocky Ford, Colorado. Results indicate that the effect of uncertainties associated with the geostatistical parameters on the spatial prediction might be significantly alleviated (by up to 80% of the prior uncertainty in K and by 90% of the prior uncertainty in H) by sampling evenly distributed measurements with a spatial measurement density of more than 1 observation per 60 m × 60 m grid block. In addition, exploration of the interaction of objective functions indicates that the ability of head measurements to reduce the uncertainty associated with the correlation scale is comparable to the effect of hydraulic conductivity measurements.

Statistical distribution of mechanical properties for three graphite-epoxy material systems

NASA Technical Reports Server (NTRS)

Reese, C.; Sorem, J., Jr.

1981-01-01

Graphite-epoxy composites are playing an increasing role as viable alternative materials in structural applications necessitating thorough investigation into the predictability and reproducibility of their material strength properties. This investigation was concerned with tension, compression, and short beam shear coupon testing of large samples from three different material suppliers to determine their statistical strength behavior. Statistical results indicate that a two Parameter Weibull distribution model provides better overall characterization of material behavior for the graphite-epoxy systems tested than does the standard Normal distribution model that is employed for most design work. While either a Weibull or Normal distribution model provides adequate predictions for average strength values, the Weibull model provides better characterization in the lower tail region where the predictions are of maximum design interest. The two sets of the same material were found to have essentially the same material properties, and indicate that repeatability can be achieved.

Efficient Simulation Budget Allocation for Selecting an Optimal Subset

NASA Technical Reports Server (NTRS)

Chen, Chun-Hung; He, Donghai; Fu, Michael; Lee, Loo Hay

2008-01-01

We consider a class of the subset selection problem in ranking and selection. The objective is to identify the top m out of k designs based on simulated output. Traditional procedures are conservative and inefficient. Using the optimal computing budget allocation framework, we formulate the problem as that of maximizing the probability of correc tly selecting all of the top-m designs subject to a constraint on the total number of samples available. For an approximation of this corre ct selection probability, we derive an asymptotically optimal allocat ion and propose an easy-to-implement heuristic sequential allocation procedure. Numerical experiments indicate that the resulting allocatio ns are superior to other methods in the literature that we tested, and the relative efficiency increases for larger problems. In addition, preliminary numerical results indicate that the proposed new procedur e has the potential to enhance computational efficiency for simulation optimization.

A novel personal air sampling device for collecting volatile organic compounds: a comparison to charcoal tubes and diffusive badges.

PubMed

Rossner, Alan; Farant, Jean-Pierre

2004-02-01

Evacuated canisters have been used for many years to collect ambient air samples for gases and vapors. Recently, significant interest has arisen in using evacuated canisters for personal breathing zone sampling as an alternative to sorbent sampling. A novel flow control device was designed and built at McGill University. The flow control device was designed to provide a very low flow rate, <0.5 mL/min, to allow a sample to be collected over an extended period of time. Previous experiments run at McGill have shown agreement between the mathematical and empirical models to predict flow rate. The flow control device combined with an evacuated canister (capillary flow control-canister) was used in a series of experiments to evaluate its performance against charcoal tubes and diffusive badges. Air samples of six volatile organic compounds were simultaneously collected in a chamber using the capillary flow control-canister, charcoal tubes, and diffusive badges. Five different concentrations of the six volatile organic compounds were evaluated. The results from the three sampling devices were compared to each other and to concentration values obtained using an online gas chromatograph (GC). Eighty-four samples of each method were collected for each of the six chemicals. Results indicate that the capillary flow control-canister device compares quite favorably to the online GC and to the charcoal tubes, p > 0.05 for most of the tests. The capillary flow control-canister was found to be more accurate for the compounds evaluated, easier to use, and easier to analyze than charcoal tubes and passive dosimeter badges.

Optimization of polymerase chain reaction for detection of Clostridium botulinum type C and D in bovine samples.

PubMed

Prévot, V; Tweepenninckx, F; Van Nerom, E; Linden, A; Content, J; Kimpe, A

2007-01-01

Botulism is a rare but serious paralytic illness caused by a nerve toxin that is produced by the bacterium Clostridium botulinum. The economic, medical and alimentary consequences can be catastrophic in case of an epizooty. A polymerase chain reaction (PCR)-based assay was developed for the detection of C. botulinum toxigenic strains type C and D in bovine samples. This assay has proved to be less expensive, faster and simpler to use than the mouse bioassay, the current reference method for diagnosis of C. botulinum toxigenic strains. Three pairs of primers were designed, one for global detection of C. botulinum types C and D (primer pair Y), and two strain-specific pairs specifically designed for types C (primer pair VC) and D (primer pair VD). The PCR amplification conditions were optimized and evaluated on 13 bovine and two duck samples that had been previously tested by the mouse bioassay. In order to assess the impact of sample treatment, both DNA extracted from crude samples and three different enrichment broths (TYG, CMM, CMM followed by TYG) were tested. A 100% sensitivity was observed when samples were enriched for 5 days in CMM followed by 1 day in TYG broth. False-negative results were encountered when C. botulinum was screened for in crude samples. These findings indicate that the current PCR is a reliable method for the detection of C. botulinum toxigenic strains type C and D in bovine samples but only after proper enrichment in CMM and TYG broth.

Experimental design matters for statistical analysis: how to handle blocking.

PubMed

Jensen, Signe M; Schaarschmidt, Frank; Onofri, Andrea; Ritz, Christian

2018-03-01

Nowadays, evaluation of the effects of pesticides often relies on experimental designs that involve multiple concentrations of the pesticide of interest or multiple pesticides at specific comparable concentrations and, possibly, secondary factors of interest. Unfortunately, the experimental design is often more or less neglected when analysing data. Two data examples were analysed using different modelling strategies. First, in a randomized complete block design, mean heights of maize treated with a herbicide and one of several adjuvants were compared. Second, translocation of an insecticide applied to maize as a seed treatment was evaluated using incomplete data from an unbalanced design with several layers of hierarchical sampling. Extensive simulations were carried out to further substantiate the effects of different modelling strategies. It was shown that results from suboptimal approaches (two-sample t-tests and ordinary ANOVA assuming independent observations) may be both quantitatively and qualitatively different from the results obtained using an appropriate linear mixed model. The simulations demonstrated that the different approaches may lead to differences in coverage percentages of confidence intervals and type 1 error rates, confirming that misleading conclusions can easily happen when an inappropriate statistical approach is chosen. To ensure that experimental data are summarized appropriately, avoiding misleading conclusions, the experimental design should duly be reflected in the choice of statistical approaches and models. We recommend that author guidelines should explicitly point out that authors need to indicate how the statistical analysis reflects the experimental design. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

Mendelian breeding units versus standard sampling strategies: Mitochondrial DNA variation in southwest Sardinia

PubMed Central

Sanna, Daria; Pala, Maria; Cossu, Piero; Dedola, Gian Luca; Melis, Sonia; Fresu, Giovanni; Morelli, Laura; Obinu, Domenica; Tonolo, Giancarlo; Secchi, Giannina; Triunfo, Riccardo; Lorenz, Joseph G.; Scheinfeldt, Laura; Torroni, Antonio; Robledo, Renato; Francalacci, Paolo

2011-01-01

We report a sampling strategy based on Mendelian Breeding Units (MBUs), representing an interbreeding group of individuals sharing a common gene pool. The identification of MBUs is crucial for case-control experimental design in association studies. The aim of this work was to evaluate the possible existence of bias in terms of genetic variability and haplogroup frequencies in the MBU sample, due to severe sample selection. In order to reach this goal, the MBU sampling strategy was compared to a standard selection of individuals according to their surname and place of birth. We analysed mitochondrial DNA variation (first hypervariable segment and coding region) in unrelated healthy subjects from two different areas of Sardinia: the area around the town of Cabras and the western Campidano area. No statistically significant differences were observed when the two sampling methods were compared, indicating that the stringent sample selection needed to establish a MBU does not alter original genetic variability and haplogroup distribution. Therefore, the MBU sampling strategy can be considered a useful tool in association studies of complex traits. PMID:21734814

Phytoremediation of trichloroethene (TCE) using cottonwood trees

USGS Publications Warehouse

Jones, S.A.; Lee, R.W.; Kuniansky, E.L.; Leeson, Andrea; Alleman, Bruce C.

1999-01-01

Phytoremediation uses the natural ability of plants to degrade contaminants in ground water. A field demonstration designed to remediate aerobic shallow ground water that contains trichloroethene began in April 1996 with the planting of cottonwood trees over an approximately 0.2-hectare area at the Naval Air Station, Fort Worth, Tx. Ground water was sampled in July 1997, November 1997, February 1998, and June 1998. Analyses from samples indicate that tree roots have the potential to create anaerobic conditions in the ground water that will facilitate degradation of trichloroethene by microbially mediated reductive dichlorination. Dissolved oxygen concentrations, which varied across the site, were smallest near a mature cottonwood tree (about-20 years old) 60 meters southwest of the cottonwood plantings. Reduction of dissolved oxygen is the primary microbially mediated reaction occurring in the ground water beneath the planted trees, whereas near the mature cottonwood tree, data indicate that methanogenesis is the most probable reaction occurring. Reductive dichlorination either is not occurring or is not a primary process away from the mature tree. On the basis of isotopic analyses of carbon-13 at locations away from the mature tree, trichloroethene concentration is controlled by volatilization.Phytoremediation uses the natural ability of plants to degrade contaminants in ground water. A field demonstration designed to remediate aerobic shallow ground water that contains trichloroethene began in April 1996 with the planting of cottonwood trees over an approximately 0.2-hectare area at the Naval Air Station, Fort Worth, Tx. Ground water was sampled in July 1997, November 1997, February 1998, and June 1998. Analyses from samples indicate that tree roots have the potential to create anaerobic conditions in the ground water that will facilitate degradation of trichloroethene by microbially mediated reductive dichlorination. Dissolved oxygen concentrations, which varied across the site, were smallest near a mature cottonwood tree (about-20 years old) 60 meters southwest of the cottonwood plantings. Reduction of dissolved oxygen is the primary microbially mediated reaction occurring in the ground water beneath the planted trees, whereas near the mature cottonwood tree, data indicate that methanogenesis is the most probable reaction occurring. Reductive dichlorination either is not occurring or is not a primary process away from the mature tree. On the basis of isotopic analyses of carbon-13 at locations away from the mature tree, trichloroethene concentration is controlled by volatilization.

A preliminary evaluation of a reusable digital sterilization indicator prototype.

PubMed

Puttaiah, R; Griggs, J; D'Onofrio, M

2014-09-01

Sterilization of critical and semicritical instruments used in patient care must undergo a terminal process of sterilization. Use of chemical and physical indicators are important in providing information on the sterilizer's performance during each cycle. Regular and periodic monitoring of sterilizers using biological indicators is necessary in periodically validating performance of sterilizers. Data loggers or independent digital parametric indicators are innovative devices that provide more information than various classes chemical indicators. In this study we evaluated a prototype of an independent digital parametric indicator's use in autoclaves. The purpose of this study was to evaluate the performance of an independent digital indicator/data logger prototype (DS1922F) that could be used for multiple cycles within an autoclave.MG Materials and methods: Three batches of the DS1922F (150 samples) were used in this study that was conducted in a series. The first batch was challenged with 300 sterilization cycles within an autoclave and the data loggers evaluated to study failures and the reason for failure, make corrections and improve the prototype design. After changes made based on studying the first batch, the second batch of the prototype (150 samples) were challenged once again with 300 sterilization cycles within an autoclave and failure studied again in further improvement of the prototype. The final batch (3rd batch) of the prototype (150 samples) was challenged again but with 600 cycles to see how long they would last. Kaplan-Meier survival analysis analyses of all three batches was conducted (α = 0.05) and failed samples qualitatively studied in understanding the variables involved in the failure of the prototype, and in improving quality. Each tested batch provided crucial information on device failure and helped in improvement of the prototype. Mean lifetime survival of the final batch (Batch 3) of prototype was 498 (480, 516) sterilization cycles in an autoclave. In this study, the final batch of the DS1922F prototype data logger was found to be robust in withstanding the challenge of 600 autoclave cycles, with a mean lifetime of more than 450 cycles, multiple times more than prescribed number of cycles. Instrument reprocessing is among the important aspects of infection control. While stringent procedures are followed in instrument reprocessing within the clinic in assuring patient safety, regular use of sterilization process indicators and periodic biological validation of the sterilizer's performance is necessary. Chemical indicators for use in Autoclaves provide information on whether the particular cycle's parameters were achieved but do not provide at what specific point in time or temperature the failure occurred. Data loggers and associated reader software as the tested prototype in this evaluation (DS1922F), are designed to provide continuous information on time and temperature of the prescribed cycle. Data loggers provide immediate information on the process as opposed to Biological Indicators that take from days to a week in obtaining a confirmatory result. Further, many countries do not have the sterilization monitoring service infrastructure to meet the demands of the end users. In the absence of sterilization monitoring services, use of digital data loggers for each sterilization cycle is more pragmatic.

Construction of a General Purpose Command Language for Use in Computer Dialog.

DTIC Science & Technology

1980-09-01

Page 1 Skeletal Command Action File...............35 2 Sample from Cyber Action File.................36 3 Program MONITOR Structure Chart...return indicates subroutine call and no return Fig 3. Program MONITOR Structure Chart 48 IV. Validation The general purpose command language was...executive control of these functions, in C addition to its role as interpreter. C C The structure , concept, design, and implementation of program C

Compendium of Operations Research and Economic Analysis Studies.

DTIC Science & Technology

1987-09-01

robots , conveyor belts, etc. are modeled as well. Simulation results indicate that the IMC design for receiving and packing is feasible from a system...Logistics Services Center (DLSC) operation. Benef its were evaluated through analysis of a sample of data from recipients as to the use being made of...Modernization of the DPSC Manufacturing Facility (August 1969) This study explored the feasibility of a proposal to air condition and modernize the

Technical note: A device for obtaining time-integrated samples of ruminal fluid

USGS Publications Warehouse

Corley, R. N.; Murphy, M.R.; Lucena, J.; Panno, S.V.

1999-01-01

A device was adapted to allow for time-integrated sampling of fluid from the rumen via a cannula. The sampler consisted of a cup-shaped ceramic filter positioned in the ventral rumen of a cannulated cow and attached to a tube through which fluid entering the filter was removed continuously using a peristaltic pump. Rate of ruminal fluid removal using the device was monitored over two 36-h periods (at 6-h intervals) and was not affected (P > .05) by time, indicating that the system was not susceptible to clogging during this period. Two cows having ad libitum access to a totally mixed ration were used in a split-block design to evaluate the utility of the system for obtaining time-integrated samples of ruminal fluid. Ruminal fluid VFA concentration and pattern in samples collected in two replicated 8-h periods by the time-integrated sampler (at 1-h intervals) were compared with composite samples collected using a conventional suction-strainer device (at 30-min intervals). Each 8-h collection period started 2 h before or 6 h after feeding. Results indicated that total VFA concentration was not affected (P > .05) by the sampling method. Volatile fatty acid patterns were likewise unaffected (P > .05) except that acetate was 2.5% higher (P < .05) in samples collected 2 h before feeding and valerate was 5% higher (P < .05) in samples collected 6 h after feeding by the suction-strainer device. Although significant, these differences were not considered physiologically important. We concluded that use of the ceramic filter improved the sampling of ruminal fluid by simplifying the technique and allowing time-integrated samples to be obtained.

Frequency and structure of stimulant designer drug consumption among suspected drug users in Budapest and South-East Hungary in 2012-2013.

PubMed

Institóris, László; Árok, Zsófia; Seprenyi, Katalin; Varga, Tibor; Sára-Klausz, Gabriella; Keller, Éva; Tóth, Réka A; Sala, Leonardo; Kereszty, Éva; Róna, Kálmán

2015-03-01

Identification of abuse and frequency patterns of stimulant designer drugs (SDDs) provides important information for their risk assessment and legislative control. In the present study urine and/or blood samples of suspected drug users in criminal cases were analysed by GC-MS for 38 SDDs, and for the most frequent illicit and psychoactive licit drugs in Hungary. Between July 2012 and June 2013, 2744 suspected drug users were sampled in Budapest and during 2012 and 2013, 774 persons were sampled in South-East Hungary (Csongrád County - neighbour the Romanian and Serbian borders). In Budapest 71.4% of cases, and in South-East Hungary 61% of cases were positive for at least one substance. Pentedrone was the most frequent SDD in both regions; however, the frequency distribution of the remaining drugs was highly diverse. SDDs were frequently present in combination with other drugs - generally with amphetamine or other stimulants, cannabis and/or benzodiazepines. The quarterly distribution of positive samples indicated remarkable seasonal changes in the frequency and pattern of consumption. Substances placed on the list of illicit drugs (mephedrone, 4-fluoro-amphetamine, MDPV, methylone, 4-MEC) showed a subsequent drop in frequency and were replaced by other SDDs (pentedrone, 3-MMC, methiopropamine, etc.). Newly identified compounds from seized materials were added to the list of new psychoactive substances ("Schedule C"). While the risk assessment of substances listed in Schedule C has to be performed within 2 years after scheduling, continuous monitoring of their presence and frequency among drug users is essential. In summary, our results suggest which substances should be dropped from the list of SDDs measured in biological samples; while the appearance of new substances from seized materials indicate the need for developing adequate standard analytical methods. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Development of a magnetic lab-on-a-chip for point-of-care sepsis diagnosis

NASA Astrophysics Data System (ADS)

Schotter, Joerg; Shoshi, Astrit; Brueckl, Hubert

2009-05-01

We present design criteria, operation principles and experimental examples of magnetic marker manipulation for our magnetic lab-on-a-chip prototype. It incorporates both magnetic sample preparation and detection by embedded GMR-type magnetoresistive sensors and is optimized for the automated point-of-care detection of four different sepsis-indicative cytokines directly from about 5 μl of whole blood. The sample volume, magnetic particle size and cytokine concentration determine the microfluidic volume, sensor size and dimensioning of the magnetic gradient field generators. By optimizing these parameters to the specific diagnostic task, best performance is expected with respect to sensitivity, analysis time and reproducibility.

Terahertz microfluidic chips for detection of amino acids in aqueous solutions

NASA Astrophysics Data System (ADS)

Su, Bo; Zhang, Cong; Fan, Ning; Zhang, Cunlin

2016-11-01

Microfluidic technology can control the fluidic thickness accurately in less than 100 micrometers. So the combination of terahertz (THz) and microfluidic technology becomes one of the most interesting directions towards biological detection. We designed microfluidic chips for terahertz spectroscopy of biological samples in aqueous solutions. Using the terahertz time-domain spectroscopy (THz-TDS) system, we experimentally measured the transmittance of the chips and the THz absorption spectra of L-threonine and L-arginine, respectively. The results indicated the feasibility of performing high sensitivity THz spectroscopy of amino acids solutions. Therefore, the microfluidic chips can realize real-time and label-free measurement for biochemistry samples in THz-TDS system.

Evaluating sampling designs by computer simulation: A case study with the Missouri bladderpod

USGS Publications Warehouse

Morrison, L.W.; Smith, D.R.; Young, C.; Nichols, D.W.

2008-01-01

To effectively manage rare populations, accurate monitoring data are critical. Yet many monitoring programs are initiated without careful consideration of whether chosen sampling designs will provide accurate estimates of population parameters. Obtaining accurate estimates is especially difficult when natural variability is high, or limited budgets determine that only a small fraction of the population can be sampled. The Missouri bladderpod, Lesquerella filiformis Rollins, is a federally threatened winter annual that has an aggregated distribution pattern and exhibits dramatic interannual population fluctuations. Using the simulation program SAMPLE, we evaluated five candidate sampling designs appropriate for rare populations, based on 4 years of field data: (1) simple random sampling, (2) adaptive simple random sampling, (3) grid-based systematic sampling, (4) adaptive grid-based systematic sampling, and (5) GIS-based adaptive sampling. We compared the designs based on the precision of density estimates for fixed sample size, cost, and distance traveled. Sampling fraction and cost were the most important factors determining precision of density estimates, and relative design performance changed across the range of sampling fractions. Adaptive designs did not provide uniformly more precise estimates than conventional designs, in part because the spatial distribution of L. filiformis was relatively widespread within the study site. Adaptive designs tended to perform better as sampling fraction increased and when sampling costs, particularly distance traveled, were taken into account. The rate that units occupied by L. filiformis were encountered was higher for adaptive than for conventional designs. Overall, grid-based systematic designs were more efficient and practically implemented than the others. ?? 2008 The Society of Population Ecology and Springer.

Adaptive sampling in research on risk-related behaviors.

PubMed

Thompson, Steven K; Collins, Linda M

2002-11-01

This article introduces adaptive sampling designs to substance use researchers. Adaptive sampling is particularly useful when the population of interest is rare, unevenly distributed, hidden, or hard to reach. Examples of such populations are injection drug users, individuals at high risk for HIV/AIDS, and young adolescents who are nicotine dependent. In conventional sampling, the sampling design is based entirely on a priori information, and is fixed before the study begins. By contrast, in adaptive sampling, the sampling design adapts based on observations made during the survey; for example, drug users may be asked to refer other drug users to the researcher. In the present article several adaptive sampling designs are discussed. Link-tracing designs such as snowball sampling, random walk methods, and network sampling are described, along with adaptive allocation and adaptive cluster sampling. It is stressed that special estimation procedures taking the sampling design into account are needed when adaptive sampling has been used. These procedures yield estimates that are considerably better than conventional estimates. For rare and clustered populations adaptive designs can give substantial gains in efficiency over conventional designs, and for hidden populations link-tracing and other adaptive procedures may provide the only practical way to obtain a sample large enough for the study objectives.

Relation Between Bitumen Content and Percentage Air Voids in Semi Dense Bituminous Concrete

NASA Astrophysics Data System (ADS)

Panda, R. P.; Das, Sudhanshu Sekhar; Sahoo, P. K.

2018-02-01

Hot mix asphalt (HMA) is a heterogeneous mix of aggregate, mineral filler, bitumen, additives and air voids. Researchers have indicated that the durability of the HMA is sensitive on the actual bitumen content and percentage air void. This paper aims at establishing the relationship between the bitumen content and the percentage air voids in Semi Dense Bituminous Concrete (SDBC) using Viscosity Grade-30 (VG-30) bitumen. Total 54 samples have been collected, for formulation and validation of relationship and observed that the percentage air voids increases with decrease in actual bitumen content and vice versa. A minor increase in percentage air voids beyond practice of designed air voids in Marshall Method of design is required for better performance, indicating a need for reducing the codal provision of minimum bitumen content for SDBC as specified in Specification for Road & Bridges (Fourth Revision) published by Indian Road Congress, 2001. The study shows a possibility of reducing designed minimum bitumen content from codal provision for SDBC by 0.2% of weight with VG-30 grade of Bitumen.

Relation Between Bitumen Content and Percentage Air Voids in Semi Dense Bituminous Concrete

NASA Astrophysics Data System (ADS)

Panda, R. P.; Das, Sudhanshu Sekhar; Sahoo, P. K.

2018-06-01

Hot mix asphalt (HMA) is a heterogeneous mix of aggregate, mineral filler, bitumen, additives and air voids. Researchers have indicated that the durability of the HMA is sensitive on the actual bitumen content and percentage air void. This paper aims at establishing the relationship between the bitumen content and the percentage air voids in Semi Dense Bituminous Concrete (SDBC) using Viscosity Grade-30 (VG-30) bitumen. Total 54 samples have been collected, for formulation and validation of relationship and observed that the percentage air voids increases with decrease in actual bitumen content and vice versa. A minor increase in percentage air voids beyond practice of designed air voids in Marshall Method of design is required for better performance, indicating a need for reducing the codal provision of minimum bitumen content for SDBC as specified in Specification for Road & Bridges (Fourth Revision) published by Indian Road Congress, 2001. The study shows a possibility of reducing designed minimum bitumen content from codal provision for SDBC by 0.2% of weight with VG-30 grade of Bitumen.

Evaluation of passive oxide layer formation-biocompatibility relationship in NiTi shape memory alloys: geometry and body location dependency.

PubMed

Toker, S M; Canadinc, D; Maier, H J; Birer, O

2014-03-01

A systematic set of ex-situ experiments were carried out on Nickel-Titanium (NiTi) shape memory alloy (SMA) in order to identify the dependence of its biocompatibility on sample geometry and body location. NiTi samples with three different geometries were immersed into three different fluids simulating different body parts. The changes observed in alloy surface and chemical content of fluids upon immersion experiments designed for four different time periods were analyzed in terms of ion release, oxide layer formation, and chemical composition of the surface layer. The results indicate that both sample geometry and immersion fluid significantly affect the alloy biocompatibility, as evidenced by the passive oxide layer formation on the alloy surface and ion release from the samples. Upon a 30 day immersion period, all three types of NiTi samples exhibited lower ion release than the critical value for clinic applications. However; a significant amount of ion release was detected in the case of gastric fluid, warranting a thorough investigation prior to utility of NiTi in gastrointestinal treatments involving long-time contact with tissue. Furthermore, certain geometries appear to be safer than the others for each fluid, providing a new set of guidelines to follow while designing implants making use of NiTi SMAs to be employed in treatments targeting specific body parts. Copyright © 2013 Elsevier B.V. All rights reserved.

Design and expected performance of a fast neutron attenuation probe for light element density measurements

DOE PAGES

Sweany, M.; Marleau, P.

2016-07-08

In this paper, we present the design and expected performance of a proof-of-concept 32 channel material identification system. Our system is based on the energy-dependent attenuation of fast neutrons for four elements: hydrogen, carbon, nitrogen and oxygen. We describe a new approach to obtaining a broad range of neutron energies to probe a sample, as well as our technique for reconstructing the molar densities within a sample. The system's performance as a function of time-of-flight energy resolution is explored using a Geant4-based Monte Carlo. Our results indicate that, with the expected detector response of our system, we will be ablemore » to determine the molar density of all four elements to within a 20–30% accuracy in a two hour scan time. In many cases this error is systematically low, thus the ratio between elements is more accurate. This degree of accuracy is enough to distinguish, for example, a sample of water from a sample of pure hydrogen peroxide: the ratio of oxygen to hydrogen is reconstructed to within 8±0.5% of the true value. Lastly, with future algorithm development that accounts for backgrounds caused by scattering within the sample itself, the accuracy of molar densities, not ratios, may improve to the 5–10% level for a two hour scan time.« less

A BASIS FOR MODIFYING THE TANK 12 COMPOSITE SAMPLING DESIGN

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shine, G.

The SRR sampling campaign to obtain residual solids material from the Savannah River Site (SRS) Tank Farm Tank 12 primary vessel resulted in obtaining appreciable material in all 6 planned source samples from the mound strata but only in 5 of the 6 planned source samples from the floor stratum. Consequently, the design of the compositing scheme presented in the Tank 12 Sampling and Analysis Plan, Pavletich (2014a), must be revised. Analytical Development of SRNL statistically evaluated the sampling uncertainty associated with using various compositing arrays and splitting one or more samples for compositing. The variance of the simple meanmore » of composite sample concentrations is a reasonable standard to investigate the impact of the following sampling options. Composite Sample Design Option (a). Assign only 1 source sample from the floor stratum and 1 source sample from each of the mound strata to each of the composite samples. Each source sample contributes material to only 1 composite sample. Two source samples from the floor stratum would not be used. Composite Sample Design Option (b). Assign 2 source samples from the floor stratum and 1 source sample from each of the mound strata to each composite sample. This infers that one source sample from the floor must be used twice, with 2 composite samples sharing material from this particular source sample. All five source samples from the floor would be used. Composite Sample Design Option (c). Assign 3 source samples from the floor stratum and 1 source sample from each of the mound strata to each composite sample. This infers that several of the source samples from the floor stratum must be assigned to more than one composite sample. All 5 source samples from the floor would be used. Using fewer than 12 source samples will increase the sampling variability over that of the Basic Composite Sample Design, Pavletich (2013). Considering the impact to the variance of the simple mean of the composite sample concentrations, the recommendation is to construct each sample composite using four or five source samples. Although the variance using 5 source samples per composite sample (Composite Sample Design Option (c)) was slightly less than the variance using 4 source samples per composite sample (Composite Sample Design Option (b)), there is no practical difference between those variances. This does not consider that the measurement error variance, which is the same for all composite sample design options considered in this report, will further dilute any differences. Composite Sample Design Option (a) had the largest variance for the mean concentration in the three composite samples and should be avoided. These results are consistent with Pavletich (2014b) which utilizes a low elevation and a high elevation mound source sample and two floor source samples for each composite sample. Utilizing the four source samples per composite design, Pavletich (2014b) utilizes aliquots of Floor Sample 4 for two composite samples.« less

Recent progresses in outcome-dependent sampling with failure time data.

PubMed

Ding, Jieli; Lu, Tsui-Shan; Cai, Jianwen; Zhou, Haibo

2017-01-01

An outcome-dependent sampling (ODS) design is a retrospective sampling scheme where one observes the primary exposure variables with a probability that depends on the observed value of the outcome variable. When the outcome of interest is failure time, the observed data are often censored. By allowing the selection of the supplemental samples depends on whether the event of interest happens or not and oversampling subjects from the most informative regions, ODS design for the time-to-event data can reduce the cost of the study and improve the efficiency. We review recent progresses and advances in research on ODS designs with failure time data. This includes researches on ODS related designs like case-cohort design, generalized case-cohort design, stratified case-cohort design, general failure-time ODS design, length-biased sampling design and interval sampling design.

Recent progresses in outcome-dependent sampling with failure time data

PubMed Central

Ding, Jieli; Lu, Tsui-Shan; Cai, Jianwen; Zhou, Haibo

2016-01-01

An outcome-dependent sampling (ODS) design is a retrospective sampling scheme where one observes the primary exposure variables with a probability that depends on the observed value of the outcome variable. When the outcome of interest is failure time, the observed data are often censored. By allowing the selection of the supplemental samples depends on whether the event of interest happens or not and oversampling subjects from the most informative regions, ODS design for the time-to-event data can reduce the cost of the study and improve the efficiency. We review recent progresses and advances in research on ODS designs with failure time data. This includes researches on ODS related designs like case–cohort design, generalized case–cohort design, stratified case–cohort design, general failure-time ODS design, length-biased sampling design and interval sampling design. PMID:26759313

Feature Selection for Ridge Regression with Provable Guarantees.

PubMed

Paul, Saurabh; Drineas, Petros

2016-04-01

We introduce single-set spectral sparsification as a deterministic sampling-based feature selection technique for regularized least-squares classification, which is the classification analog to ridge regression. The method is unsupervised and gives worst-case guarantees of the generalization power of the classification function after feature selection with respect to the classification function obtained using all features. We also introduce leverage-score sampling as an unsupervised randomized feature selection method for ridge regression. We provide risk bounds for both single-set spectral sparsification and leverage-score sampling on ridge regression in the fixed design setting and show that the risk in the sampled space is comparable to the risk in the full-feature space. We perform experiments on synthetic and real-world data sets; a subset of TechTC-300 data sets, to support our theory. Experimental results indicate that the proposed methods perform better than the existing feature selection methods.

[Low level alpha activity measurements with pulse shape discrimination--application to the determination of alpha-nuclides in environmental samples].

PubMed

Satoh, K; Noguchi, M; Higuchi, H; Kitamura, K

1984-12-01

Liquid scintillation counting of alpha rays with pulse shape discrimination was applied to the analysis of 226Ra and 239+240Pu in environmental samples and of alpha-emitters in/on a filter paper. The instrument used in this study was either a specially designed detector or a commercial liquid scintillation counter with an automatic sample changer, both of which were connected to the pulse shape discrimination circuit. The background counting rate in alpha energy region of 5-7 MeV was 0.01 or 0.04 cpm/MeV, respectively. The figure of merit indicating the resolving power for alpha- and beta-particles in time spectrum was found to be 5.7 for the commercial liquid scintillation counter.

Far Field Modeling Methods For Characterizing Surface Detonations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Garrett, A.

2015-10-08

Savannah River National Laboratory (SRNL) analyzed particle samples collected during experiments that were designed to replicate tests of nuclear weapons components that involve detonation of high explosives (HE). SRNL collected the particle samples in the HE debris cloud using innovative rocket propelled samplers. SRNL used scanning electronic microscopy to determine the elemental constituents of the particles and their size distributions. Depleted uranium composed about 7% of the particle contents. SRNL used the particle size distributions and elemental composition to perform transport calculations that indicate in many terrains and atmospheric conditions the uranium bearing particles will be transported long distances downwind.more » This research established that HE tests specific to nuclear proliferation should be detectable at long downwind distances by sampling airborne particles created by the test detonations.« less

Orientationally invariant metrics of apparent compartment eccentricity from double pulsed field gradient diffusion experiments.

PubMed

Jespersen, Sune Nørhøj; Lundell, Henrik; Sønderby, Casper Kaae; Dyrby, Tim B

2013-12-01

Pulsed field gradient diffusion sequences (PFG) with multiple diffusion encoding blocks have been indicated to offer new microstructural tissue information, such as the ability to detect nonspherical compartment shapes in macroscopically isotropic samples, i.e. samples with negligible directional signal dependence on diffusion gradients in standard diffusion experiments. However, current acquisition schemes are not rotationally invariant in the sense that the derived metrics depend on the orientation of the sample, and are affected by the interplay of sampling directions and compartment orientation dispersion when applied to macroscopically anisotropic systems. Here we propose a new framework, the d-PFG 5-design, to enable rotationally invariant estimation of double wave vector diffusion metrics (d-PFG). The method is based on the idea that an appropriate orientational average of the signal emulates the signal from a powder preparation of the same sample, where macroscopic anisotropy is absent by construction. Our approach exploits the theory of exact numerical integration (quadrature) of polynomials on the rotation group, and we exemplify the general procedure with a set consisting of 60 pairs of diffusion wave vectors (the d-PFG 5-design) facilitating a theoretically exact determination of the fourth order Taylor or cumulant expansion of the orientationally averaged signal. The d-PFG 5-design is evaluated with numerical simulations and ex vivo high field diffusion MRI experiments in a nonhuman primate brain. Specifically, we demonstrate rotational invariance when estimating compartment eccentricity, which we show offers new microstructural information, complementary to that of fractional anisotropy (FA) from diffusion tensor imaging (DTI). The imaging observations are supported by a new theoretical result, directly relating compartment eccentricity to FA of individual pores. Copyright © 2013 John Wiley & Sons, Ltd.

Magnetic Barkhausen Noise Measurements Using Tetrapole Probe Designs

NASA Astrophysics Data System (ADS)

McNairnay, Paul

A magnetic Barkhausen noise (MBN) testing system was developed for Defence Research and Development Canada (DRDC) to perform MBN measurements on the Royal Canadian Navy's Victoria class submarine hulls that can be correlated with material properties, including residual stress. The DRDC system was based on the design of a MBN system developed by Steven White at Queen's University, which was capable of performing rapid angular dependent measurements through the implementation of a flux controlled tetrapole probe. In tetrapole probe designs, the magnetic excitation field is rotated in the surface plane of the sample under the assumption of linear superposition of two orthogonal magnetic fields. During the course of this work, however, the validity of flux superposition in ferromagnetic materials, for the purpose of measuring MBN, was brought into question. Consequently, a study of MBN anisotropy using tetrapole probes was performed. Results indicate that MBN anisotropy measured under flux superposition does not simulate MBN anisotropy data obtained through manual rotation of a single dipole excitation field. It is inferred that MBN anisotropy data obtained with tetrapole probes is the result of the magnetic domain structure's response to an orthogonal magnetization condition and not necessarily to any bulk superposition magnetization in the sample. A qualitative model for the domain configuration under two orthogonal magnetic fields is proposed to describe the results. An empirically derived fitting equation, that describes tetrapole MBN anisotropy data, is presented. The equation describes results in terms of two largely independent orthogonal fields, and includes interaction terms arising due to competing orthogonally magnetized domain structures and interactions with the sample's magnetic easy axis. The equation is used to fit results obtained from a number of samples and tetrapole orientations and in each case correctly identifies the samples' magnetic easy axis.

Accuracy of two osmometers on standard samples: electrical impedance technique and freezing point depression technique

NASA Astrophysics Data System (ADS)

García-Resúa, Carlos; Pena-Verdeal, Hugo; Miñones, Mercedes; Gilino, Jorge; Giraldez, Maria J.; Yebra-Pimentel, Eva

2013-11-01

High tear fluid osmolarity is a feature common to all types of dry eye. This study was designed to establish the accuracy of two osmometers, a freezing point depression osmometer (Fiske 110) and an electrical impedance osmometer (TearLab™) by using standard samples. To assess the accuracy of the measurements provided by the two instruments we used 5 solutions of known osmolarity/osmolality; 50, 290 and 850 mOsm/kg and 292 and 338 mOsm/L. Fiske 110 is designed to be used in samples of 20 μl, so measurements were made on 1:9, 1:4, 1:1 and 1:0 dilutions of the standards. Tear Lab is addressed to be used in tear film and only a sample of 0.05 μl is required, so no dilutions were employed. Due to the smaller measurement range of the TearLab, the 50 and 850 mOsm/kg standards were not included. 20 measurements per standard sample were used and differences with the reference value was analysed by one sample t-test. Fiske 110 showed that osmolarity measurements differed statistically from standard values except those recorded for 290 mOsm/kg standard diluted 1:1 (p = 0.309), the 292 mOsm/L H2O sample (1:1) and 338 mOsm/L H2O standard (1:4). The more diluted the sample, the higher the error rate. For the TearLab measurements, one-sample t-test indicated that all determinations differed from the theoretical values (p = 0.001), though differences were always small. For undiluted solutions, Fiske 110 shows similar performance than TearLab. However, for the diluted standards, Fiske 110 worsens.

New tools for evaluating LQAS survey designs

PubMed Central

2014-01-01

Lot Quality Assurance Sampling (LQAS) surveys have become increasingly popular in global health care applications. Incorporating Bayesian ideas into LQAS survey design, such as using reasonable prior beliefs about the distribution of an indicator, can improve the selection of design parameters and decision rules. In this paper, a joint frequentist and Bayesian framework is proposed for evaluating LQAS classification accuracy and informing survey design parameters. Simple software tools are provided for calculating the positive and negative predictive value of a design with respect to an underlying coverage distribution and the selected design parameters. These tools are illustrated using a data example from two consecutive LQAS surveys measuring Oral Rehydration Solution (ORS) preparation. Using the survey tools, the dependence of classification accuracy on benchmark selection and the width of the ‘grey region’ are clarified in the context of ORS preparation across seven supervision areas. Following the completion of an LQAS survey, estimation of the distribution of coverage across areas facilitates quantifying classification accuracy and can help guide intervention decisions. PMID:24528928

New tools for evaluating LQAS survey designs.

PubMed

Hund, Lauren

2014-02-15

Lot Quality Assurance Sampling (LQAS) surveys have become increasingly popular in global health care applications. Incorporating Bayesian ideas into LQAS survey design, such as using reasonable prior beliefs about the distribution of an indicator, can improve the selection of design parameters and decision rules. In this paper, a joint frequentist and Bayesian framework is proposed for evaluating LQAS classification accuracy and informing survey design parameters. Simple software tools are provided for calculating the positive and negative predictive value of a design with respect to an underlying coverage distribution and the selected design parameters. These tools are illustrated using a data example from two consecutive LQAS surveys measuring Oral Rehydration Solution (ORS) preparation. Using the survey tools, the dependence of classification accuracy on benchmark selection and the width of the 'grey region' are clarified in the context of ORS preparation across seven supervision areas. Following the completion of an LQAS survey, estimation of the distribution of coverage across areas facilitates quantifying classification accuracy and can help guide intervention decisions.

External quality-assurance results for the National Atmospheric Deposition Program/National Trends Network, 2002-03

USGS Publications Warehouse

Wetherbee, Gregory A.; Latysh, Natalie E.; Burke, Kevin P.

2005-01-01

Six external quality-assurance programs were operated by the U.S. Geological Survey (USGS) External Quality-Assurance (QA) Project for the National Atmospheric Deposition Program/National Trends Network (NADP/NTN) from 2002 through 2003. Each program measured specific components of the overall error inherent in NADP/NTN wet-deposition measurements. The intersite-comparison program assessed the variability and bias of pH and specific conductance determinations made by NADP/NTN site operators twice per year with respect to accuracy goals. The percentage of site operators that met the pH accuracy goals decreased from 92.0 percent in spring 2002 to 86.3 percent in spring 2003. In these same four intersite-comparison studies, the percentage of site operators that met the accuracy goals for specific conductance ranged from 94.4 to 97.5 percent. The blind-audit program and the sample-handling evaluation (SHE) program evaluated the effects of routine sample handling, processing, and shipping on the chemistry of weekly NADP/NTN samples. The blind-audit program data indicated that the variability introduced by sample handling might be environmentally significant to data users for sodium, potassium, chloride, and hydrogen ion concentrations during 2002. In 2003, the blind-audit program was modified and replaced by the SHE program. The SHE program was designed to control the effects of laboratory-analysis variability. The 2003 SHE data had less overall variability than the 2002 blind-audit data. The SHE data indicated that sample handling buffers the pH of the precipitation samples and, in turn, results in slightly lower conductivity. Otherwise, the SHE data provided error estimates that were not environmentally significant to data users. The field-audit program was designed to evaluate the effects of onsite exposure, sample handling, and shipping on the chemistry of NADP/NTN precipitation samples. Field-audit results indicated that exposure of NADP/NTN wet-deposition samples to onsite conditions tended to neutralize the acidity of the samples by less than 1.0 microequivalent per liter. Onsite exposure of the sampling bucket appeared to slightly increase the concentration of most of the analytes but not to an extent that was environmentally significant to NADP data users. An interlaboratory-comparison program was used to estimate the analytical variability and bias of the NADP Central Analytical Laboratory (CAL) during 2002-03. Bias was identified in the CAL data for calcium, magnesium, sodium, potassium, ammonium, chloride, nitrate, sulfate, hydrogen ion, and specific conductance, but the absolute value of the bias was less than analytical minimum detection limits for all constituents except magnesium, nitrate, sulfate, and specific conductance. Control charts showed that CAL results were within statistical control approximately 90 percent of the time. Data for the analysis of ultrapure deionized-water samples indicated that CAL did not have problems with laboratory contamination. During 2002-03, the overall variability of data from the NADP/NTN precipitation-monitoring system was estimated using data from three collocated monitoring sites. Measurement differences of constituent concentration and deposition for paired samples from the collocated samplers were evaluated to compute error terms. The medians of the absolute percentage errors (MAEs) for the paired samples generally were larger for cations (approximately 8 to 50 percent) than for anions (approximately 3 to 33 percent). MAEs were approximately 16 to 30 percent for hydrogen-ion concentration, less than 10 percent for specific conductance, less than 5 percent for sample volume, and less than 8 percent for precipitation depth. The variability attributed to each component of the sample-collection and analysis processes, as estimated by USGS quality-assurance programs, varied among analytes. Laboratory analysis variability accounted for approximately 2 percent of the

Ocean wavenumber estimation from wave-resolving time series imagery

USGS Publications Warehouse

Plant, N.G.; Holland, K.T.; Haller, M.C.

2008-01-01

We review several approaches that have been used to estimate ocean surface gravity wavenumbers from wave-resolving remotely sensed image sequences. Two fundamentally different approaches that utilize these data exist. A power spectral density approach identifies wavenumbers where image intensity variance is maximized. Alternatively, a cross-spectral correlation approach identifies wavenumbers where intensity coherence is maximized. We develop a solution to the latter approach based on a tomographic analysis that utilizes a nonlinear inverse method. The solution is tolerant to noise and other forms of sampling deficiency and can be applied to arbitrary sampling patterns, as well as to full-frame imagery. The solution includes error predictions that can be used for data retrieval quality control and for evaluating sample designs. A quantitative analysis of the intrinsic resolution of the method indicates that the cross-spectral correlation fitting improves resolution by a factor of about ten times as compared to the power spectral density fitting approach. The resolution analysis also provides a rule of thumb for nearshore bathymetry retrievals-short-scale cross-shore patterns may be resolved if they are about ten times longer than the average water depth over the pattern. This guidance can be applied to sample design to constrain both the sensor array (image resolution) and the analysis array (tomographic resolution). ?? 2008 IEEE.

A prepositioned areal electrofishing apparatus for sampling stream habitats

USGS Publications Warehouse

Fisher, William L.; Brown, Marshall E.

1993-01-01

We describe the design, use, and sampling characteristics ofan electrofishing apparatus used to sample fish in stream habitats. The apparatus uses two prepositioned areal electrofishing devices (PAED) of different designs, a bottom parallel electrode PAED and a suspended dropper electrode PAED. To determine the effective immobilization ranges of the PAEDs, we evaluated intensities and shapes of the PAEDs' electrical fields, and the electroshock responses of fish in cages in concrete tanks and in four streams in Alabama with different water conductivities. Electroshock responses indicated that complete immobilization occurred at voltage gradients of 1.0 V/cm or higher (voltage drop, 400 V AC), as far as 35 cm from the PAED electrodes, although some fish were immobilized up to 65 cm away at 0.3 V/cm. We estimated the immobilization (stun) power density threshold to be about 10 μW/cm3. Stream evaluations of the PAEDs revealed that higher voltages were needed to immobilize fish at lower (35 μS/cm) and higher (120 and 125 μS/cm) water conductivities, whereas lower voltages were required at an intermediate conductivity (60 μS/cm). These results conformed with the predictions of power transfer theory and underscored the need to calibrate PAEDs to stream conductivities to standardize the effective sampling range.

MOD: An Organic Detector for the Future Exploration of Mars

NASA Technical Reports Server (NTRS)

Kminek, G.; Bada, J. L.; Botta, O.; Grunthaner, F.; Glavin, D. P.

1999-01-01

The Mars Organic Detector (MOD) is designed to assess whether organic compounds, possibly associated with life, are present in Martian rock and soil samples. MOD has a detection limit that is at least two orders of magnitude more sensitive than the Viking GCMS. MOD is focused on detecting amino acids, amines and PAH (polycyclic aromatic hydrocarbons). Amino acids play an essential role in biochemistry on Earth and PAH are widespread throughout the universe and can provide an indication of the delivery of meteoritic organic material to Mars. The advantage of MOD is the absence of wet chemistry and its simple and robust design. The sample will be extracted from the mineral matrix (0.1 - 1 g of rock-powder) using sublimation and analyzed with a fluorescence detector. The isolation method is based on the fact that amino acids and PAH are volatile at temperatures greater than 150C. The fluorescence detection scheme is based on UV excitation with LED's, optical filters, PrN diode photon detector and a sample calibration reservoir. Fluorescamine is used as a fluorescing reagent for amino acids and amines, while PAH are naturally fluorescent. There is no sample preparation required and the turnaround time for a single analysis is on the order of minutes.

Impedance biosensor based on interdigitated electrode array for detection of E.coli O157:H7 in food products

NASA Astrophysics Data System (ADS)

Ghosh Dastider, Shibajyoti; Barizuddin, Syed; Dweik, Majed; Almasri, Mahmoud F.

2012-05-01

An impedance biosensor was designed, fabricated and tested for detection of viable Escherichia coli O157:H7 in food samples. This device consists of interdigitated microelectrode array (IDEA) fabricated using thin layer of sputtered gold, embedded under a polydimethylsiloxane (PDMS) microchannel. The array of electrodes is designed to detect viable EColi in different food products. The active surface area of the detection array was modified using goat anti-E.coli polyclonal IgG antibody. Contaminated food samples were tested by infusing the supernatant containing bacteria over the IDEA's, through the microchannel. Antibody-antigen binding on the electrodes results in impedance change. Four serial concentrations of E.coli contaminated food samples (3x102 CFUmL-1 to 3x105 CFUmL-1) were tested. The biosensor successfully detected the E.coli samples, with the lower detection limit being 3x103 CFUmL-1 (up to 3cells/μl). Comparing the test results with an IDEA impedance biosensor without microchannel (published elsewhere) indicates that this biosensor have two order of magnitude times higher sensitivity. The proposed biosensor provides qualitative and quantitative detection, and potentially could be used for detection of other type of bacteria by immobilizing the specific type of antibody.

Total pollution effect of urban surface runoff.

PubMed

Luo, Hongbing; Luo, Lin; Huang, Gu; Liu, Ping; Li, Jingxian; Hu, Sheng; Wang, Fuxiang; Xu, Rui; Huang, Xiaoxue

2009-01-01

For pollution research with regard to urban surface runoff, most sampling strategies to date have focused on differences in land usage. With single land-use sampling, total surface runoff pollution effect cannot be evaluated unless every land usage spot is monitored. Through a new sampling strategy known as mixed stormwater sampling for a street community at discharge outlet adjacent to river, this study assessed the total urban surface runoff pollution effect caused by a variety of land uses and the pollutants washed off from the rain pipe system in the Futian River watershed in Shenzhen City of China. The water quality monitoring indices were COD (chemical oxygen demand), TSS (total suspend solid), TP (total phosphorus), TN (total nitrogen) and BOD (biochemical oxygen demand). The sums of total pollution loads discharged into the river for the four indices of COD, TSS, TN, and TP over all seven rainfall events were very different. The mathematical model for simulating total pollution loads was established from discharge outlet mixed stormwater sampling of total pollution loads on the basis of four parameters: rainfall intensity, total land area, impervious land area, and pervious land area. In order to treat surface runoff pollution, the values of MFF30 (mass first flush ratio) and FF30 (first 30% of runoff volume) can be considered as split-flow control criteria to obtain more effective and economical design of structural BMPs (best management practices) facilities.

Modeling and Qualification of a Modified Emission Unit for Radioactive Air Emissions Stack Sampling Compliance.

PubMed

Barnett, J Matthew; Yu, Xiao-Ying; Recknagle, Kurtis P; Glissmeyer, John A

2016-11-01

A planned laboratory space and exhaust system modification to the Pacific Northwest National Laboratory Material Science and Technology Building indicated that a new evaluation of the mixing at the air sampling system location would be required for compliance to ANSI/HPS N13.1-2011. The modified exhaust system would add a third fan, thereby increasing the overall exhaust rate out the stack, thus voiding the previous mixing study. Prior to modifying the radioactive air emissions exhaust system, a three-dimensional computational fluid dynamics computer model was used to evaluate the mixing at the sampling system location. Modeling of the original three-fan system indicated that not all mixing criteria could be met. A second modeling effort was conducted with the addition of an air blender downstream of the confluence of the three fans, which then showed satisfactory mixing results. The final installation included an air blender, and the exhaust system underwent full-scale tests to verify velocity, cyclonic flow, gas, and particulate uniformity. The modeling results and those of the full-scale tests show agreement between each of the evaluated criteria. The use of a computational fluid dynamics code was an effective aid in the design process and allowed the sampling system to remain in its original location while still meeting the requirements for sampling at a well mixed location.

Vitamin D receptor gene and osteoporosis - author`s response

DOE Office of Scientific and Technical Information (OSTI.GOV)

Looney, J.E.; Yoon, Hyun Koo; Fischer, M.

1996-04-01

We appreciate the comments of Dr. Nguyen et al. about our recent study, but we disagree with their suggestion that the lack of an association between low bone density and the BB VDR genotype, which we reported, is an artifact generated by the small sample size. Furthermore, our results are consistent with similar conclusions reached by a number of other investigators, as recently reported by Peacock. Peacock states {open_quotes}Taken as a whole, the results of studies outlined ... indicate that VDR alleles, cannot account for the major part of the heritable component of bone density as indicated by Morrison etmore » al.{close_quotes}. The majority of the 17 studies cited in this editorial could not confirm an association between the VDR genotype and the bone phenotype. Surely one cannot criticize this combined work as representing an artifact because of a too small sample size. We do not dispute the suggestion by Nguyen et al. that large sample sizes are required to analyze small biological effects. This is evident in both Peacock`s summary and in their own bone density studies. We did not design our study with a larger sample size because, based on the work of Morrison et al., we had hypothesized a large biological effect; large sample sizes are only needed for small biological effects. 4 refs.« less

YOUNG STELLAR POPULATIONS IN MYStIX STAR-FORMING REGIONS: CANDIDATE PROTOSTARS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Romine, Gregory; Feigelson, Eric D.; Getman, Konstantin V.

The Massive Young Star-Forming Complex in Infrared and X-ray (MYStIX) project provides a new census on stellar members of massive star-forming regions within 4 kpc. Here the MYStIX Infrared Excess catalog and Chandra -based X-ray photometric catalogs are mined to obtain high-quality samples of Class I protostars using criteria designed to reduce extragalactic and Galactic field star contamination. A total of 1109 MYStIX Candidate Protostars (MCPs) are found in 14 star-forming regions. Most are selected from protoplanetary disk infrared excess emission, but 20% are found from their ultrahard X-ray spectra from heavily absorbed magnetospheric flare emission. Two-thirds of the MCP sample ismore » newly reported here. The resulting samples are strongly spatially associated with molecular cores and filaments on Herschel far-infrared maps. This spatial agreement and other evidence indicate that the MCP sample has high reliability with relatively few “false positives” from contaminating populations. But the limited sensitivity and sparse overlap among the infrared and X-ray subsamples indicate that the sample is very incomplete with many “false negatives.” Maps, tables, and source descriptions are provided to guide further study of star formation in these regions. In particular, the nature of ultrahard X-ray protostellar candidates without known infrared counterparts needs to be elucidated.« less

Colorimetric-Solid Phase Extraction Technology for Water Quality Monitoring: Evaluation of C-SPE and Debubbling Methods in Microgravity

NASA Technical Reports Server (NTRS)

Hazen-Bosveld, April; Lipert, Robert J.; Nordling, John; Shih, Chien-Ju; Siperko, Lorraine; Porter, Marc D.; Gazda, Daniel B.; Rutz, Jeff A.; Straub, John E.; Schultz, John R.;

[Modal failure analysis and effects in the detection of errors in the transport of samples to the clinical laboratory].

PubMed

Parés-Pollán, L; Gonzalez-Quintana, A; Docampo-Cordeiro, J; Vargas-Gallego, C; García-Álvarez, G; Ramos-Rodríguez, V; Diaz Rubio-García, M P

2014-01-01

Owing to the decrease in values of biochemical glucose parameter in some samples from external extraction centres, and the risk this implies to patient safety; it was decided to apply an adaptation of the «Health Services Failure Mode and Effects Analysis» (HFMEA) to manage risk during the pre-analytical phase of sample transportation from external centres to clinical laboratories. A retrospective study of glucose parameter was conducted during two consecutive months. The analysis was performed in its different phases: to define the HFMEA topic, assemble the team, graphically describe the process, conduct a hazard analysis, design the intervention and indicators, and identify a person to be responsible for ensuring completion of each action. The results of glucose parameter in one of the transport routes, were significantly lower (P=.006). The errors and potential causes of this problem were analysed, and criteria of criticality and detectability were applied (score≥8) in the decision tree. It was decided to: develop a document management system; reorganise extractions and transport routes in some centres; quality control of the sample container ice-packs, and the time and temperature during transportation. This work proposes quality indicators for controlling time and temperature of transported samples in the pre-analytical phase. Periodic review of certain laboratory parameters can help to detect problems in transporting samples. The HFMEA technique is useful for the clinical laboratory. Copyright © 2013 SECA. Published by Elsevier Espana. All rights reserved.

Portable Automation of Static Chamber Sample Collection for Quantifying Soil Gas Flux

DOE Office of Scientific and Technical Information (OSTI.GOV)

Davis, Morgan P.; Groh, Tyler A.; Parkin, Timothy B.

Quantification of soil gas flux using the static chamber method is labor intensive. The number of chambers that can be sampled is limited by the spacing between chambers and the availability of trained research technicians. An automated system for collecting gas samples from chambers in the field would eliminate the need for personnel to return to the chamber during a flux measurement period and would allow a single technician to sample multiple chambers simultaneously. This study describes Chamber Automated Sampling Equipment (FluxCASE) to collect and store chamber headspace gas samples at assigned time points for the measurement of soil gasmore » flux. The FluxCASE design and operation is described, and the accuracy and precision of the FluxCASE system is evaluated. In laboratory measurements of nitrous oxide (N2O), carbon dioxide (CO2), and methane (CH4) concentrations of a standardized gas mixture, coefficients of variation associated with automated and manual sample collection were comparable, indicating no loss of precision. In the field, soil gas fluxes measured from FluxCASEs were in agreement with manual sampling for both N2O and CO2. Slopes of regression equations were 1.01 for CO2 and 0.97 for N2O. The 95% confidence limits of the slopes of the regression lines included the value of one, indicating no bias. Additionally, an expense analysis found a cost recovery ranging from 0.6 to 2.2 yr. Implementing the FluxCASE system is an alternative to improve the efficiency of the static chamber method for measuring soil gas flux while maintaining the accuracy and precision of manual sampling.« less

Preserving ground water samples with hydrochloric acid does not result in the formation of chloroform

USGS Publications Warehouse

Squillace, Paul J.; Pankow, James F.; Barbash, Jack E.; Price, Curtis V.; Zogorski, John S.

1999-01-01

Water samples collected for the determination of volatile organic compounds (VOCs) are often preserved with hydrochloric acid (HCl) to inhibit the biotransformation of the analytes of interest until the chemical analyses can he performed. However, it is theoretically possible that residual free chlorine in the HCl can react with dissolved organic carbon (DOC) to form chloroform via the haloform reaction. Analyses of 1501 ground water samples preserved with HCl from the U.S. Geological Survey's National Water-Quality Assessment Program indicate that chloroform was the most commonly detected VOC among 60 VOCs monitored. The DOC concentrations were not significantly larger in samples with detectable chloroform than in those with no delectable chloroform, nor was there any correlation between the concentrations of chloroform and DOC. Furthermore, chloroform was detected more frequently in shallow ground water in urban areas (28.5% of the wells sampled) than in agricultural areas (1.6% of the wells sampled), which indicates that its detection was more related to urban land-use activities than to sample acidification. These data provide strong evidence that acidification with HCl does not lead to the production of significant amounts of chloroform in ground water samples. To verify these results, an acidification study was designed to measure the concentrations of all trihalomethanes (THMs) that can form as a result of HCl preservation in ground water samples and to determine if ascorbic acid (C6H8O6) could inhibit this reaction if it did occur. This study showed that no THMs were formed as a result of HCl acidification, and that ascorbic acid had no discernible effect on the concentrations of THMs measured.

What do Australian consumers, pharmacists and prescribers think about documenting indications on prescriptions and dispensed medicines labels?: A qualitative study.

PubMed

Garada, Mona; McLachlan, Andrew J; Schiff, Gordon D; Lehnbom, Elin C

2017-11-15

Documenting the indication on prescriptions and dispensed medicines labels is not standard practice in Australia. However, previous studies that have focused on the content and design of dispensed medicines labels, have suggested including the indication as a safety measure. The aim of this study was to investigate the perspectives of Australian consumers, pharmacists and prescribers on documenting the indication on prescriptions and dispensed medicines labels. Semi-structured interviews were conducted and mock-up of dispensed medicines labels were designed for participants. Consumers (n = 19) and pharmacists (n = 7) were recruited by convenience sample at community pharmacies in Sydney (Australia) and prescribers (n = 8), including two medical students, were recruited through snowballing. Thirty-four participants were interviewed. Most participants agreed that documenting the indication would be beneficial especially for patients who are forgetful or take multiple medications. Participants also believed it would improve consumers' medication understanding and adherence. Prescribers and pharmacists believed it could help reduce prescribing and dispensing errors by matching the drug/dosage to the correct indication. Prescribers refrained from documenting the indication to protect patients' privacy; however, most patients did not consider documenting the indication as a breach of privacy. Prescribers raised concerns about the extra time to include indications on prescriptions and best language to document indications, using plain language as opposed to medical terminology. All interviewed stakeholders identified numerous benefits of documenting the indication on prescriptions and dispensed medicines labels. Whether these potential benefits can be realized remains unknown and addressing prescribers' concern regarding the time involved in documenting the indication on prescriptions remains a challenge for vendors of electronic medication management systems.

Design and evaluation of a nondestructive fissile assay device for HTGR fuel samples

DOE Office of Scientific and Technical Information (OSTI.GOV)

McNeany, S. R.; Knoll, R. W.; Jenkins, J. D.

1979-02-01

Nondestructive assay of fissile material plays an important role in nuclear fuel processing facilities. Information for product quality control, plant criticality safety, and nuclear materials accountability can be obtained from assay devices. All of this is necessary for a safe, efficient, and orderly operation of a production plant. Presented here is a design description and an operational evaluation of a device developed to nondestructively assay small samples of High-Temperature Gas-Cooled Reactor (HTGR) fuel. The measurement technique employed consists in thermal-neutron irradiation of a sample followed by pneumatic transfer to a high-efficiency neutron detector where delayed neutrons are counted. In general,more » samples undergo several irradiation and count cycles during a measurement. The total number of delayed-neutron counts accumulated is translated into grams of fissile mass through comparison with the counts accumulated in an identical irradiation and count sequence of calibration standards. Successful operation of the device through many experiments over a one-year period indicates high operational reliability. Tests of assay precision show this to be better than 0.25% for measurements of 10 min. Assay biases may be encountered if calibration standards are not representative of unknown samples, but reasonable care in construction and control of standards should lead to no more than 0.2% bias in the measurements. Nondestructive fissile assay of HTGR fuel samples by thermal-neutron irradiation and delayed-neutron detection has been demonstrated to be a rapid and accurate analysis technique. However, careful attention and control must be given to calibration standards to see that they remain representative of unknown samples.« less

Towards psychologically adaptive brain-computer interfaces

NASA Astrophysics Data System (ADS)

Myrden, A.; Chau, T.

2016-12-01

Objective. Brain-computer interface (BCI) performance is sensitive to short-term changes in psychological states such as fatigue, frustration, and attention. This paper explores the design of a BCI that can adapt to these short-term changes. Approach. Eleven able-bodied individuals participated in a study during which they used a mental task-based EEG-BCI to play a simple maze navigation game while self-reporting their perceived levels of fatigue, frustration, and attention. In an offline analysis, a regression algorithm was trained to predict changes in these states, yielding Pearson correlation coefficients in excess of 0.45 between the self-reported and predicted states. Two means of fusing the resultant mental state predictions with mental task classification were investigated. First, single-trial mental state predictions were used to predict correct classification by the BCI during each trial. Second, an adaptive BCI was designed that retrained a new classifier for each testing sample using only those training samples for which predicted mental state was similar to that predicted for the current testing sample. Main results. Mental state-based prediction of BCI reliability exceeded chance levels. The adaptive BCI exhibited significant, but practically modest, increases in classification accuracy for five of 11 participants and no significant difference for the remaining six despite a smaller average training set size. Significance. Collectively, these findings indicate that adaptation to psychological state may allow the design of more accurate BCIs.

Website Designs for Communicating About Chemicals in Cigarette Smoke.

PubMed

Lazard, Allison J; Byron, M Justin; Vu, Huyen; Peters, Ellen; Schmidt, Annie; Brewer, Noel T

2017-12-13

The Family Smoking Prevention and Tobacco Control Act requires the US government to inform the public about the quantities of toxic chemicals in cigarette smoke. A website can accomplish this task efficiently, but the site's user interface must be usable to benefit the general public. We conducted online experiments with national convenience samples of 1,451 US adult smokers and nonsmokers to examine the impact of four interface display elements: the chemicals, their associated health effects, quantity information, and a visual risk indicator. Outcomes were perceptions of user experience (perceived clarity and usability), motivation (willingness to use), and potential impact (elaboration about the harms of smoking). We found displaying health effects as text with icons, providing quantity information for chemicals (e.g., ranges), and showing a visual risk indicator all improved the user experience of a webpage about chemicals in cigarette smoke (all p < .05). Displaying a combination of familiar and unfamiliar chemicals, providing quantity information for chemicals, and showing a visual risk indicator all improved motivation to use the webpage (all p < .05). Displaying health effects or quantity information increased the potential impact of the webpage (all p < .05). Overall, interface designs displaying health effects of chemicals in cigarette smoke as text with icons and with a visual risk indicator had the greatest impact on the user experience, motivation, and potential impact of the website. Our findings provide guidance for accessible website designs that can inform consumers about the toxic chemicals in cigarette smoke.

National survey of foodborne viruses in Australian oysters at production.

PubMed

Torok, Valeria; Hodgson, Kate; McLeod, Catherine; Tan, Jessica; Malhi, Navreet; Turnbull, Alison

2018-02-01

Internationally human enteric viruses, such as norovirus (NoV) and hepatitis A virus (HAV), are frequently associated with shellfish related foodborne disease outbreaks, and it has been suggested that acceptable NoV limits based on end-point testing be established for this high risk food group. Currently, shellfish safety is generally managed through the use of indicators of faecal contamination. Between July 2014 and August 2015, a national prevalence survey for NoV and HAV was done in Australian oysters suitable for harvest. Two sampling rounds were undertaken to determine baseline levels of these viruses. Commercial Australian growing areas, represented by 33 oyster production regions in New South Wales, South Australia, Tasmania and Queensland, were included in the survey. A total of 149 and 148 samples were collected during round one and two of sampling, respectively, and tested for NoV and HAV by quantitative RT-PCR. NoV and HAV were not detected in oysters collected in either sampling round, indicating an estimated prevalence for these viruses in Australian oysters of <2% with a 95% confidence interval based on the survey design. The low estimated prevalence of foodborne viruses in Australian oysters was consistent with epidemiological evidence, with no oyster-related foodborne viral illness reported during the survey period. Copyright © 2017 Elsevier Ltd. All rights reserved.

Inspection design using 2D phased array, TFM and cueMAP software

DOE Office of Scientific and Technical Information (OSTI.GOV)

McGilp, Ailidh; Dziewierz, Jerzy; Lardner, Tim

2014-02-18

A simulation suite, cueMAP, has been developed to facilitate the design of inspection processes and sparse 2D array configurations. At the core of cueMAP is a Total Focusing Method (TFM) imaging algorithm that enables computer assisted design of ultrasonic inspection scenarios, including the design of bespoke array configurations to match the inspection criteria. This in-house developed TFM code allows for interactive evaluation of image quality indicators of ultrasonic imaging performance when utilizing a 2D phased array working in FMC/TFM mode. The cueMAP software uses a series of TFM images to build a map of resolution, contrast and sensitivity of imagingmore » performance of a simulated reflector, swept across the inspection volume. The software takes into account probe properties, wedge or water standoff, and effects of specimen curvature. In the validation process of this new software package, two 2D arrays have been evaluated on 304n stainless steel samples, typical of the primary circuit in nuclear plants. Thick section samples have been inspected using a 1MHz 2D matrix array. Due to the processing efficiency of the software, the data collected from these array configurations has been used to investigate the influence sub-aperture operation on inspection performance.« less

Attitudes towards smoking restrictions and tobacco advertisement bans in Georgia.

PubMed

Bakhturidze, George D; Mittelmark, Maurice B; Aarø, Leif E; Peikrishvili, Nana T

2013-11-25

This study aims to provide data on a public level of support for restricting smoking in public places and banning tobacco advertisements. A nationally representative multistage sampling design, with sampling strata defined by region (sampling quotas proportional to size) and substrata defined by urban/rural and mountainous/lowland settlement, within which census enumeration districts were randomly sampled, within which households were randomly sampled, within which a randomly selected respondent was interviewed. The country of Georgia, population 4.7 million, located in the Caucasus region of Eurasia. One household member aged between 13 and 70 was selected as interviewee. In households with more than one age-eligible person, selection was carried out at random. Of 1588 persons selected, 14 refused to participate and interviews were conducted with 915 women and 659 men. Respondents were interviewed about their level of agreement with eight possible smoking restrictions/bans, used to calculate a single dichotomous (agree/do not agree) opinion indicator. The level of agreement with restrictions was analysed in bivariate and multivariate analyses by age, gender, education, income and tobacco use status. Overall, 84.9% of respondents indicated support for smoking restrictions and tobacco advertisement bans. In all demographic segments, including tobacco users, the majority of respondents indicated agreement with restrictions, ranging from a low of 51% in the 13-25 age group to a high of 98% in the 56-70 age group. Logistic regression with all demographic variables entered showed that agreement with restrictions was higher with age, and was significantly higher among never smokers as compared to daily smokers. Georgian public opinion is normatively supportive of more stringent tobacco-control measures in the form of smoking restrictions and tobacco advertisement bans.

Planetary Sample Caching System Design Options

NASA Technical Reports Server (NTRS)

Collins, Curtis; Younse, Paulo; Backes, Paul

2009-01-01

Potential Mars Sample Return missions would aspire to collect small core and regolith samples using a rover with a sample acquisition tool and sample caching system. Samples would need to be stored in individual sealed tubes in a canister that could be transfered to a Mars ascent vehicle and returned to Earth. A sample handling, encapsulation and containerization system (SHEC) has been developed as part of an integrated system for acquiring and storing core samples for application to future potential MSR and other potential sample return missions. Requirements and design options for the SHEC system were studied and a recommended design concept developed. Two families of solutions were explored: 1)transfer of a raw sample from the tool to the SHEC subsystem and 2)transfer of a tube containing the sample to the SHEC subsystem. The recommended design utilizes sample tool bit change out as the mechanism for transferring tubes to and samples in tubes from the tool. The SHEC subsystem design, called the Bit Changeout Caching(BiCC) design, is intended for operations on a MER class rover.

Creel survey sampling designs for estimating effort in short-duration Chinook salmon fisheries

USGS Publications Warehouse

McCormick, Joshua L.; Quist, Michael C.; Schill, Daniel J.

2013-01-01

Chinook Salmon Oncorhynchus tshawytscha sport fisheries in the Columbia River basin are commonly monitored using roving creel survey designs and require precise, unbiased catch estimates. The objective of this study was to examine the relative bias and precision of total catch estimates using various sampling designs to estimate angling effort under the assumption that mean catch rate was known. We obtained information on angling populations based on direct visual observations of portions of Chinook Salmon fisheries in three Idaho river systems over a 23-d period. Based on the angling population, Monte Carlo simulations were used to evaluate the properties of effort and catch estimates for each sampling design. All sampling designs evaluated were relatively unbiased. Systematic random sampling (SYS) resulted in the most precise estimates. The SYS and simple random sampling designs had mean square error (MSE) estimates that were generally half of those observed with cluster sampling designs. The SYS design was more efficient (i.e., higher accuracy per unit cost) than a two-cluster design. Increasing the number of clusters available for sampling within a day decreased the MSE of estimates of daily angling effort, but the MSE of total catch estimates was variable depending on the fishery. The results of our simulations provide guidelines on the relative influence of sample sizes and sampling designs on parameters of interest in short-duration Chinook Salmon fisheries.

Effective Low-Frequency Geoacoustic Properties Inferred from Measurements in the Northeast Atlantic

DTIC Science & Technology

1982-09-01

models designed to predict the nature of acoustic boundary Interaction. For five sites involving thickly sedimented bottoms, simple models are...DSDP Site 95 136. Gross descriptor! of lithology and age of the sediment profile at DSDP site is indicated on the left. Core sampling was not...during the 1890’s. Rayleigh derived the reflection coefficient for plane waves incident at arbitrary angles on the boundary separa- ting two

Relationship between Heavy Metal Concentrations in Soils and Grasses of Roadside Farmland in Nepal

PubMed Central

Yan, Xuedong; Zhang, Fan; Zeng, Chen; Zhang, Man; Devkota, Lochan Prasad; Yao, Tandong

2012-01-01

Transportation activities can contribute to accumulation of heavy metals in roadside soil and grass, which could potentially compromise public health and the environment if the roadways cross farmland areas. Particularly, heavy metals may enter the food chain as a result of their uptake by roadside edible grasses. This research was conducted to investigate heavy metal (Cu, Zn, Cd, and Pb) concentrations in roadside farmland soils and corresponding grasses around Kathmandu, Nepal. Four factors were considered for the experimental design, including sample type, sampling location, roadside distance, and tree protection. A total of 60 grass samples and 60 topsoil samples were collected under dry weather conditions. The Multivariate Analysis of Variance (MANOVA) results indicate that the concentrations of Cu, Zn, and Pb in the soil samples are significantly higher than those in the grass samples; the concentrations of Cu and Pb in the suburban roadside farmland are higher than those in the rural mountainous roadside farmland; and the concentrations of Cu and Zn at the sampling locations with roadside trees are significantly lower than those without tree protection. The analysis of transfer factor, which is calculated as the ratio of heavy-metal concentrations in grass to those in the corresponding soil, indicates that the uptake capabilities of heavy metals from soil to grass is in the order of Zn > Cu > Pb. Additionally, it is found that as the soils’ heavy-metal concentrations increase, the capability of heavy-metal transfer to the grass decreases, and this relationship can be characterized by an exponential regression model. PMID:23202679

The New Bedford Harbor Superfund site long-term monitoring program (1993-2009).

PubMed

Nelson, William G; Bergen, Barbara J

2012-12-01

New Bedford Harbor (NBH), located in southeastern Massachusetts, was designated as a marine Superfund site in 1983 due to sediment contamination by polychlorinated biphenyls (PCBs). Based on risks to human health and the environment, the first two phases of the site cleanup involved dredging PCB-contaminated sediments from the harbor. Therefore, a long-term monitoring program (LTM) was developed to measure spatial and temporal chemical and biological changes in sediment, water, and biota to assess the effects and effectiveness of the remedial activities. A systematic, probabilistic sampling design was used to select sediment sampling stations. This unbiased design allowed the three segments of the harbor to be compared spatially and temporally to quantify changes resulting from dredging the contaminated sediments. Sediment was collected at each station, and chemical (e.g., PCBs and metals), physical (e.g., grain size), and biological (e.g., benthic community) measurements were conducted on all samples. This paper describes the overall NBH-LTM approach and the results from the five rounds of sample collections. There is a decreasing spatial gradient in sediment PCB concentrations from the northern boundary (upper harbor) to the southern boundary (outer harbor) of the site. Along this same transect, there is an increase in biological condition (e.g., benthic community diversity). Temporally, the contaminant and biological gradients have been maintained since the 1993 baseline collection; however, since the onset of full-scale remediation, PCB concentrations have decreased throughout the site, and one of the benthic community indices has shown significant improvement in the lower and outer harbor areas.

Evaluation of the NCPDP Structured and Codified Sig Format for e-prescriptions

PubMed Central

Burkhart, Q; Bell, Douglas S

2011-01-01

Objective To evaluate the ability of the structure and code sets specified in the National Council for Prescription Drug Programs Structured and Codified Sig Format to represent ambulatory electronic prescriptions. Design We parsed the Sig strings from a sample of 20 161 de-identified ambulatory e-prescriptions into variables representing the fields of the Structured and Codified Sig Format. A stratified random sample of these representations was then reviewed by a group of experts. For codified Sig fields, we attempted to map the actual words used by prescribers to the equivalent terms in the designated terminology. Measurements Proportion of prescriptions that the Format could fully represent; proportion of terms used that could be mapped to the designated terminology. Results The fields defined in the Format could fully represent 95% of Sigs (95% CI 93% to 97%), but ambiguities were identified, particularly in representing multiple-step instructions. The terms used by prescribers could be codified for only 60% of dose delivery methods, 84% of dose forms, 82% of vehicles, 95% of routes, 70% of sites, 33% of administration timings, and 93% of indications. Limitations The findings are based on a retrospective sample of ambulatory prescriptions derived mostly from primary care physicians. Conclusion The fields defined in the Format could represent most of the patient instructions in a large prescription sample, but prior to its mandatory adoption, further work is needed to ensure that potential ambiguities are addressed and that a complete set of terms is available for the codified fields. PMID:21613642

Design and experimental verification of a water-like pentamode material

NASA Astrophysics Data System (ADS)

Zhao, Aiguo; Zhao, Zhigao; Zhang, Xiangdong; Cai, Xuan; Wang, Lei; Wu, Tao; Chen, Hong

2017-01-01

Pentamode materials approximate tailorable artificial liquids. Recently, microscopic versions of these intricate structures have been fabricated, and the static mechanical experiments reveal that the ratio of bulk modulus to shear modulus as large as 1000 can be obtained. However, no direct acoustic experimental characterizations have been reported yet. In this paper, a water-like two-dimensional pentamode material sample is designed and fabricated with a single metallic material, which is a hollow metallic foam-like structure at centimeter scale. Acoustic simulation and experimental testing results indicate that the designed pentamode material mimics water in acoustic properties over a wide frequency range, i.e., it exhibits transparency when surrounded by water. This work contributes to the development of microstructural design of materials with specific modulus and density distribution, thus paving the way for the physical realization of special acoustic devices such as metamaterial lenses and vibration isolation.

Adaptive sampling in behavioral surveys.

PubMed

Thompson, S K

1997-01-01

Studies of populations such as drug users encounter difficulties because the members of the populations are rare, hidden, or hard to reach. Conventionally designed large-scale surveys detect relatively few members of the populations so that estimates of population characteristics have high uncertainty. Ethnographic studies, on the other hand, reach suitable numbers of individuals only through the use of link-tracing, chain referral, or snowball sampling procedures that often leave the investigators unable to make inferences from their sample to the hidden population as a whole. In adaptive sampling, the procedure for selecting people or other units to be in the sample depends on variables of interest observed during the survey, so the design adapts to the population as encountered. For example, when self-reported drug use is found among members of the sample, sampling effort may be increased in nearby areas. Types of adaptive sampling designs include ordinary sequential sampling, adaptive allocation in stratified sampling, adaptive cluster sampling, and optimal model-based designs. Graph sampling refers to situations with nodes (for example, people) connected by edges (such as social links or geographic proximity). An initial sample of nodes or edges is selected and edges are subsequently followed to bring other nodes into the sample. Graph sampling designs include network sampling, snowball sampling, link-tracing, chain referral, and adaptive cluster sampling. A graph sampling design is adaptive if the decision to include linked nodes depends on variables of interest observed on nodes already in the sample. Adjustment methods for nonsampling errors such as imperfect detection of drug users in the sample apply to adaptive as well as conventional designs.

40 CFR 1065.1105 - Sampling system design.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 33 2014-07-01 2014-07-01 false Sampling system design. 1065.1105... Compounds § 1065.1105 Sampling system design. (a) General. We recommend that you design your SVOC batch... practical, adjust sampling times based on the emission rate of target analytes from the engine to obtain...

MindSurf: a pilot study to assess the usability and acceptability of a smartphone app designed to promote contentment, wellbeing, and goal achievement.

PubMed

Carey, Timothy A; Haviland, Jennifer; Tai, Sara J; Vanags, Thea; Mansell, Warren

2016-12-12

The Method of Levels (MOL) is a transdiagnostic cognitive therapy that promotes contentment, wellbeing, and goal achievement through the resolution of internal conflicts underlying psychological distress. MOL, based on Perceptual Control Theory (PCT), was developed in routine clinical practice and has been used effectively across different health services by different practitioners. Access to MOL-style questions through a smartphone app could, potentially, help both the general public maintain robust mental health, and also be a useful adjunct to therapy for clinical populations. The app is called MindSurf because of its focus on helping people explore their thinking. Prior to developing the app and using it with different populations it was necessary to determine whether such an idea would be usable for and acceptable to potential app users. Therefore, a pilot study was conducted with a non-clinical sample to assess the usability and acceptability of the app including monitoring whether the questions delivered in this way were associated with any adverse events. A pilot study using quantitative as well as qualitative methods and incorporating a repeated measures, A-B design was conducted. The 23 participants were healthy adult volunteers who were all either undergraduate students, postgraduate students, or staff of the University of Manchester. They received MOL-style questions on their mobile phones over a 1-week period. Qualitative results were encouraging and indicated that the format and style of questioning were acceptable to participants and did not lead to increased worry or concern. A one-way, repeated measures ANOVA indicated that there was a nonsignificant decrease in scores on the 21-item Depression, Anxiety, and Stress Scale (DASS21) over a 2 week period. The results of the pilot study justified development of MindSurf and further testing once it is available for use. A power analysis indicated that the pilot study was underpowered to detect significant effects but provided important information regarding the appropriate sample size for future research. The pilot study also indicated that future research should investigate the effects of receiving more than three questions per day. Results of the pilot study indicate that MindSurf will be a usable and acceptable app. Its benefits should be further explored through longer studies with larger sample of both the general population as well as clinical populations.

Spatial and temporal variance in fatty acid and stable isotope signatures across trophic levels in large river systems

USGS Publications Warehouse

Fritts, Andrea; Knights, Brent C.; Lafrancois, Toben D.; Bartsch, Lynn; Vallazza, Jon; Bartsch, Michelle; Richardson, William B.; Karns, Byron N.; Bailey, Sean; Kreiling, Rebecca

2018-01-01

Fatty acid and stable isotope signatures allow researchers to better understand food webs, food sources, and trophic relationships. Research in marine and lentic systems has indicated that the variance of these biomarkers can exhibit substantial differences across spatial and temporal scales, but this type of analysis has not been completed for large river systems. Our objectives were to evaluate variance structures for fatty acids and stable isotopes (i.e. δ13C and δ15N) of seston, threeridge mussels, hydropsychid caddisflies, gizzard shad, and bluegill across spatial scales (10s-100s km) in large rivers of the Upper Mississippi River Basin, USA that were sampled annually for two years, and to evaluate the implications of this variance on the design and interpretation of trophic studies. The highest variance for both isotopes was present at the largest spatial scale for all taxa (except seston δ15N) indicating that these isotopic signatures are responding to factors at a larger geographic level rather than being influenced by local-scale alterations. Conversely, the highest variance for fatty acids was present at the smallest spatial scale (i.e. among individuals) for all taxa except caddisflies, indicating that the physiological and metabolic processes that influence fatty acid profiles can differ substantially between individuals at a given site. Our results highlight the need to consider the spatial partitioning of variance during sample design and analysis, as some taxa may not be suitable to assess ecological questions at larger spatial scales.

Evaluation of single and two-stage adaptive sampling designs for estimation of density and abundance of freshwater mussels in a large river

USGS Publications Warehouse

Smith, D.R.; Rogala, J.T.; Gray, B.R.; Zigler, S.J.; Newton, T.J.

2011-01-01

Reliable estimates of abundance are needed to assess consequences of proposed habitat restoration and enhancement projects on freshwater mussels in the Upper Mississippi River (UMR). Although there is general guidance on sampling techniques for population assessment of freshwater mussels, the actual performance of sampling designs can depend critically on the population density and spatial distribution at the project site. To evaluate various sampling designs, we simulated sampling of populations, which varied in density and degree of spatial clustering. Because of logistics and costs of large river sampling and spatial clustering of freshwater mussels, we focused on adaptive and non-adaptive versions of single and two-stage sampling. The candidate designs performed similarly in terms of precision (CV) and probability of species detection for fixed sample size. Both CV and species detection were determined largely by density, spatial distribution and sample size. However, designs did differ in the rate that occupied quadrats were encountered. Occupied units had a higher probability of selection using adaptive designs than conventional designs. We used two measures of cost: sample size (i.e. number of quadrats) and distance travelled between the quadrats. Adaptive and two-stage designs tended to reduce distance between sampling units, and thus performed better when distance travelled was considered. Based on the comparisons, we provide general recommendations on the sampling designs for the freshwater mussels in the UMR, and presumably other large rivers.

A Propaganda Index for Reviewing Problem Framing in Articles and Manuscripts: An Exploratory Study

PubMed Central

Gambrill, Eileen; Reiman, Amanda

2011-01-01

Objective To determine the effectiveness of an index in increasing recognition of misleading problem framing in articles and manuscripts. Design A propaganda index consisting of 32 items was developed drawing on related literature. Seventeen subjects who review manuscripts for possible publication were requested to read five recent published reports of randomized controlled trials concerning social anxiety and to identify indicators of propaganda (defined as encouraging beliefs and actions with the least thought possible). They then re-read the same five articles using a propaganda index to note instances of propaganda. Data source Convenience sample of individuals who review manuscripts for possible publication and sample of recent published reports of randomized controlled trials regarding social anxiety in five different journals by different authors, blinded by author and journal. Results Data showed that there was a high rate of propagandistic problem framing in reports of RCTs regarding social anxiety such as hiding well argued alternative views and vagueness. This occurred in 117 out of 160 opportunities over five research reports. A convenience sample of 17 academics spotted only 4.5 percent of propaganda indicators. This increased to 64 percent with use of the 32 item propaganda index. Use of a propaganda index increased recognition of related indicators. However many instances remained undetected. Conclusion This propaganda index warrants further exploration as a complement to reporting guidelines such as CONSORT and PRISMA. PMID:21647426

Optimal flexible sample size design with robust power.

PubMed

Zhang, Lanju; Cui, Lu; Yang, Bo

2016-08-30

It is well recognized that sample size determination is challenging because of the uncertainty on the treatment effect size. Several remedies are available in the literature. Group sequential designs start with a sample size based on a conservative (smaller) effect size and allow early stop at interim looks. Sample size re-estimation designs start with a sample size based on an optimistic (larger) effect size and allow sample size increase if the observed effect size is smaller than planned. Different opinions favoring one type over the other exist. We propose an optimal approach using an appropriate optimality criterion to select the best design among all the candidate designs. Our results show that (1) for the same type of designs, for example, group sequential designs, there is room for significant improvement through our optimization approach; (2) optimal promising zone designs appear to have no advantages over optimal group sequential designs; and (3) optimal designs with sample size re-estimation deliver the best adaptive performance. We conclude that to deal with the challenge of sample size determination due to effect size uncertainty, an optimal approach can help to select the best design that provides most robust power across the effect size range of interest. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

Perception of prescription medicine sample packs among Australian professional, government, industry, and consumer organizations, based on automated textual analysis of one-on-one interviews.

PubMed

Kyle, Greg J; Nissen, Lisa; Tett, Susan

2008-12-01

Prescription medicine samples provided by pharmaceutical companies are predominantly newer and more expensive products. The range of samples provided to practices may not represent the drugs that the doctors desire to have available. Few studies have used a qualitative design to explore the reasons behind sample use. The aim of this study was to explore the opinions of a variety of Australian key informants about prescription medicine samples, using a qualitative methodology. Twenty-three organizations involved in quality use of medicines in Australia were identified, based on the authors' previous knowledge. Each organization was invited to nominate 1 or 2 representatives to participate in semistructured interviews utilizing seeding questions. Each interview was recorded and transcribed verbatim. Leximancer v2.25 text analysis software (Leximancer Pty Ltd., Jindalee, Queensland, Australia) was used for textual analysis. The top 10 concepts from each analysis group were interrogated back to the original transcript text to determine the main emergent opinions. A total of 18 key interviewees representing 16 organizations participated. Samples, patient, doctor, and medicines were the major concepts among general opinions about samples. The concept drug became more frequent and the concept companies appeared when marketing issues were discussed. The Australian Pharmaceutical Benefits Scheme and cost were more prevalent in discussions about alternative sample distribution models, indicating interviewees were cognizant of budgetary implications. Key interviewee opinions added richness to the single-word concepts extracted by Leximancer. Participants recognized that prescription medicine samples have an influence on quality use of medicines and play a role in the marketing of medicines. They also believed that alternative distribution systems for samples could provide benefits. The cost of a noncommercial system for distributing samples or starter packs was a concern. These data will be used to design further research investigating alternative models for distribution of samples.

Use of multiple colorimetric indicators for paper-based microfluidic devices.

PubMed

Dungchai, Wijitar; Chailapakul, Orawon; Henry, Charles S

2010-08-03

We report here the use of multiple indicators for a single analyte for paper-based microfluidic devices (microPAD) in an effort to improve the ability to visually discriminate between analyte concentrations. In existing microPADs, a single dye system is used for the measurement of a single analyte. In our approach, devices are designed to simultaneously quantify analytes using multiple indicators for each analyte improving the accuracy of the assay. The use of multiple indicators for a single analyte allows for different indicator colors to be generated at different analyte concentration ranges as well as increasing the ability to better visually discriminate colors. The principle of our devices is based on the oxidation of indicators by hydrogen peroxide produced by oxidase enzymes specific for each analyte. Each indicator reacts at different peroxide concentrations and therefore analyte concentrations, giving an extended range of operation. To demonstrate the utility of our approach, the mixture of 4-aminoantipyrine and 3,5-dichloro-2-hydroxy-benzenesulfonic acid, o-dianisidine dihydrochloride, potassium iodide, acid black, and acid yellow were chosen as the indicators for simultaneous semi-quantitative measurement of glucose, lactate, and uric acid on a microPAD. Our approach was successfully applied to quantify glucose (0.5-20 mM), lactate (1-25 mM), and uric acid (0.1-7 mM) in clinically relevant ranges. The determination of glucose, lactate, and uric acid in control serum and urine samples was also performed to demonstrate the applicability of this device for biological sample analysis. Finally results for the multi-indicator and single indicator system were compared using untrained readers to demonstrate the improvements in accuracy achieved with the new system. 2010 Elsevier B.V. All rights reserved.

National accident sampling system sample design, phases 2 and 3 : executive summary

DOT National Transportation Integrated Search

1979-11-01

This report describes the Phase 2 and 3 sample design for the : National Accident Sampling System (NASS). It recommends a procedure : for the first-stage selection of Primary Sampling Units (PSU's) and : the second-stage design for the selection of a...

Automated ground-water monitoring with Robowell: case studies and potential applications

NASA Astrophysics Data System (ADS)

Granato, Gregory E.; Smith, Kirk P.

2002-02-01

Robowell is an automated system and method for monitoring ground-water quality. Robowell meets accepted manual- sampling protocols without high labor and laboratory costs. Robowell periodically monitors and records water-quality properties and constituents in ground water by pumping a well or multilevel sampler until one or more purge criteria have been met. A record of frequent water-quality measurements from a monitoring site can indicate changes in ground-water quality and can provide a context for the interpretation of laboratory data from discrete samples. Robowell also can communicate data and system performance through a remote communication link. Remote access to ground-water data enables the user to monitor conditions and optimize manual sampling efforts. Six Robowell prototypes have successfully monitored ground-water quality during all four seasons of the year under different hydrogeologic conditions, well designs, and geochemical environments. The U.S. Geological Survey is seeking partners for research with robust and economical water-quality monitoring instruments designed to measure contaminants of concern in conjunction with the application and commercialization of the Robowell technology. Project publications and information about technology transfer opportunities are available on the Internet at URL http://ma.water.usgs.gov/automon/

Automated ground-water monitoring with robowell-Case studies and potential applications

USGS Publications Warehouse

Granato, G.E.; Smith, K.P.; ,

2001-01-01

Robowell is an automated system and method for monitoring ground-water quality. Robowell meets accepted manual-sampling protocols without high labor and laboratory costs. Robowell periodically monitors and records water-quality properties and constituents in ground water by pumping a well or multilevel sampler until one or more purge criteria have been met. A record of frequent water-quality measurements from a monitoring site can indicate changes in ground-water quality and can provide a context for the interpretation of laboratory data from discrete samples. Robowell also can communicate data and system performance through a remote communication link. Remote access to ground-water data enables the user to monitor conditions and optimize manual sampling efforts. Six Robowell prototypes have successfully monitored ground-water quality during all four seasons of the year under different hydrogeologic conditions, well designs, and geochemical environments. The U.S. Geological Survey is seeking partners for research with robust and economical water-quality monitoring instruments designed to measure contaminants of concern in conjunction with the application and commercialization of the Robowell technology. Project publications and information about technology transfer opportunities are available on the Internet at URL http://ma.water.usgs.gov/automon/.

Effects of heat treatments and UV exposures on mechanical properties of 3D printed acrylonitrile butadiene styrene specimens

NASA Astrophysics Data System (ADS)

Hughes, Shawn M.; Alamir, Mohammed; Neas, Brian; Alzahrani, Naif; Asmatulu, Ramazan

2017-04-01

Over the last few years, tremendous amount of research efforts has been conducted on 3D printing materials, methods and systems. Various 3D printer materials in different size, shape and geometry can be used for advanced designs, modeling, and manufacturing for different industrial applications. In the present study, dog bone shape specimen was designed via a CATIA CAD model, and then printed by a 3D printer using a polymeric filament (acrylonitrile butadiene styrene - ABS). Some of the prepared samples were heat treated at 40 °C, 60 °C, and 80 °C for 30 minutes, while the others were exposed to the UV light in a chamber for 0, 5, 10, 15 and 20 days. The surface and mechanical properties of the conditioned samples were determined using water contact angle and tensile test units, respectively. The test results indicated that the heat treatment process increased the mechanical properties; however, the UV exposure tests significantly reduced the water contact angle and properties of the samples. During these studies, undergraduate engineering students were involved in the tests, and gained a lot of hands-on research experiences.

Customising turnaround time indicators to requesting clinician: a 10-year study through balanced scorecard indicators.

PubMed

Salinas, Maria; López-Garrigós, Maite; Santo-Quiles, Ana; Gutierrez, Mercedes; Lugo, Javier; Lillo, Rosa; Leiva-Salinas, Carlos

2014-09-01

The purpose of this study is, first to present a 10-year monitoring of postanalytical turnaround time (TAT) adapted to different clinicians and patient situations, second to evaluate and analyse the indicators results during that period of time, and finally to show a synthetic appropriate indicator to be included in the balanced scorecard management system. TAT indicator for routine samples was devised as the percentage of certain key tests that were verified before a specific time on the phlebotomy day. A weighted mean synthetic indicator was also designed. They were calculated for inpatients at 15:00 and 12:00 and for primary care patients only at 15:00. The troponin TAT of emergency department patients, calculated as the difference between the troponin verification and registration time, was selected as the stat laboratory TAT indicator. The routine and stat TAT improved along the 10-year study period. The synthetic indicator showed the same trend. The implementation of systematic and continuous monitoring over years, promoted a continuous improvement in TAT which will probably benefit patient outcome and safety.

30 CFR 70.208 - Bimonthly sampling; designated areas.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Bimonthly sampling; designated areas. 70.208... SAFETY AND HEALTH MANDATORY HEALTH STANDARDS-UNDERGROUND COAL MINES Sampling Procedures § 70.208 Bimonthly sampling; designated areas. (a) Each operator shall take one valid respirable dust sample from...

30 CFR 70.208 - Bimonthly sampling; designated areas.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Bimonthly sampling; designated areas. 70.208... SAFETY AND HEALTH MANDATORY HEALTH STANDARDS-UNDERGROUND COAL MINES Sampling Procedures § 70.208 Bimonthly sampling; designated areas. (a) Each operator shall take one valid respirable dust sample from...

On the importance of incorporating sampling weights in ...

EPA Pesticide Factsheets

Occupancy models are used extensively to assess wildlife-habitat associations and to predict species distributions across large geographic regions. Occupancy models were developed as a tool to properly account for imperfect detection of a species. Current guidelines on survey design requirements for occupancy models focus on the number of sample units and the pattern of revisits to a sample unit within a season. We focus on the sampling design or how the sample units are selected in geographic space (e.g., stratified, simple random, unequal probability, etc). In a probability design, each sample unit has a sample weight which quantifies the number of sample units it represents in the finite (oftentimes areal) sampling frame. We demonstrate the importance of including sampling weights in occupancy model estimation when the design is not a simple random sample or equal probability design. We assume a finite areal sampling frame as proposed for a national bat monitoring program. We compare several unequal and equal probability designs and varying sampling intensity within a simulation study. We found the traditional single season occupancy model produced biased estimates of occupancy and lower confidence interval coverage rates compared to occupancy models that accounted for the sampling design. We also discuss how our findings inform the analyses proposed for the nascent North American Bat Monitoring Program and other collaborative synthesis efforts that propose h

Use of prostate-specific antigen (PSA) to measure semen exposure resulting from male condom failures: implications for contraceptive efficacy and the prevention of sexually transmitted disease.

PubMed

Walsh, Terri L; Frezieres, Ron G; Peacock, Karen; Nelson, Anita L; Clark, Virginia A; Bernstein, Leslie; Wraxall, Brian G D

2003-02-01

Accurate measurement of semen exposure resulting from condom failures can refine public health messages and improve predictions of condom efficacy in preventing pregnancy and HIV transmission. Eight hundred and thirty couples enrolled in a condom efficacy study were asked to collect a baseline sample of ejaculate from the inside of the first study condom they used and to collect a postcoital vaginal sample whenever a study condom broke or slipped off during intercourse. All samples were quantitatively tested for prostate-specific antigen (PSA), a substance found only in human semen, using rocket immunoelectrophoresis, and inspected microscopically for presence of sperm. Sixty-eight baseline ejaculate samples collected from the inside of the first study condom by couples who subsequently experienced a condom failure averaged 13.4 microg PSA per swab and 79% of the samples averaged one or more sperm per high power field (hpf). Seventy-nine postcoital vaginal samples obtained after a condom break averaged 5.7 microg PSA per swab and only 38% averaged one or more sperm per hpf. The PSA results indicated a 50% reduction in semen exposure compared to baseline levels (p = 0.0001). Seventeen samples obtained after a condom slip-off averaged 2.5 microg PSA per swab and none of the samples averaged one or more sperm per hpf. The PSA results indicated an 80% reduction in semen exposure compared to baseline levels (p = 0.0001). Our results suggest that even condoms that fail reduce the risk of pregnancy and the transmission of sexually transmitted disease compared to unprotected intercourse. We also used PSA results to adjust a model designed to predict consistent-use pregnancy rates from condom breakage and slippage data.

Detection of HbsAg and hATIII genetically modified goats (Caprahircus) by loop-mediated isothermal amplification.

PubMed

Tao, Chenyu; Zhang, Qingde; Zhai, Shanli; Liu, Bang

2013-11-01

In this study, sensitive and rapid detection systems were designed using a loop-mediated isothermal amplification (LAMP) method to detect the genetically modified goats. A set of 4 primers were designed for each exogenous nucleic acids HBsAg and hATIII. The DNA samples were first amplified with the outer and inner primers and released a single-stranded DNA,of which both ends were stem-loop structure. Then one inner primer hybridized with the loop, and initiated displacement synthesis in less than 1 h. The result could be visualized by both agarose gel electrophoresis and unaided eyes directly after adding SYBR GREEN 1. The detection limit of LAMP was ten copies of target molecules, indicating that LAMP was tenfold more sensitive than the classical PCR. Furthermore, all the samples of genetically modified goats were tested positively by LAMP, and the results demonstrated that the LAMP was a rapid and sensitive method for detecting the genetically modified organism.

An IRT Analysis of the Reading the Mind in the Eyes Test.

PubMed

Black, Jessica E

2018-04-03

The Reading the Mind in the Eyes Test (RMET; Baron-Cohen, Wheelwright, Hill, Raste, & Plumb, 2001 ), originally designed for use in clinical populations, has been used with increasing frequency as a measure of advanced social cognition in nonclinical samples (e.g., Domes, Heinriches, Michel, Berger, & Herpertz, 2007 ; Kidd & Castano, 2013 ; Mar, Oatley, Hirsh, de la Paz, & Peterson, 2006 ). The purpose of this research was to use item response theory to assess the ability of the RMET to detect differences at the high levels of theory of mind to be expected in neurotypical adults. Results indicate that the RMET is an easy test that fails to discriminate between individuals exhibiting high ability. As such, it is unlikely that it could adequately or reliably capture the expected effects of manipulations designed to boost ability in samples of neurotypical populations. Reported effects and noneffects from such manipulations might reflect noise introduced by inaccurate measurement; a more sensitive instrument is needed to verify the effects of manipulations to enhance theory of mind.

EFFECTS OF GAMMA IRRADIATION ON EPDM ELASTOMERS (REVISION 1)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Clark, E.

Two formulations of EPDM elastomer, one substituting a UV stabilizer for the normal antioxidant in this polymer, and the other the normal formulation, were synthesized and samples of each were exposed to gamma irradiation in initially pure deuterium gas to compare their radiation stability. Stainless steel containers having rupture disks were designed for this task. After 130 MRad dose of cobalt-60 radiation in the SRNL Gamma Irradiation Facility, a significant amount of gas was created by radiolysis; however the composition indicated by mass spectroscopy indicated an unexpected increase in the total amount deuterium in both formulations. The irradiated samples retainedmore » their ductility in a bend test. No change of sample weight, dimensions, or density was observed. No change of the glass transition temperature as measured by dynamic mechanical analysis was observed, and most of the other dynamic mechanical properties remained unchanged. There appeared to be an increase in the storage modulus of the irradiated samples containing the UV stabilizer above the glass transition, which may indicate hardening of the material by radiation damage. Revision 1 adds a comparison with results of a study of tritium exposed EPDM. The amount of gas produced by the gamma irradiation was found to be equivalent to about 280 days exposure to initially pure tritium gas at one atmosphere. The glass transition temperature of the tritium exposed EPDM rose about 10°C. over 280 days, while no glass transition temperature change was observed for gamma irradiated EPDM. This means that gamma irradiation in deuterium cannot be used as a surrogate for tritium exposure.« less

Directional measures of postural sway as predictors of balance instability and accidental falls

PubMed Central

Janusz, Błaszczyk W.; Beck, Monika; Szczepańska, Justyna; Sadowska, Dorota; Bacik, Bogdan; Juras, Grzegorz

2016-01-01

Abstract Despite the obvious advantages and popularity of static posturography, universal standards for posturographic tests have not been developed thus far. Most of the center-of-foot pressure (COP) indices are strongly dependent on an individual experimental design, and are susceptible to distortions, which makes results of their analysis incomparable. In this research, we present a novel approach to the analysis of the COP trajectory based on the directional features of postural sway. Our novel output measures: the sway directional indices (DI) and sway vector (SV) were applied to assess the postural stability in the group of young able-bodied subjects. Towards this aim, the COP trajectories were recorded in 100 students standing still for 60 s, with eyes open (EO) and then, with eyes closed (EC). Each record was subdivided then into 20, 30 and 60 s samples. Interclass correlation coefficients were calculated from the samples. The controlled variables (visual conditions) uniquely affected the output measures, but only in case of proper signal pretreatment (low-pass filtering). In filtering below 6 Hz, the DI and SV provided a unique set of descriptors for postural control. Both sway measures were highly independent of the trial length and the sampling frequency, and were unaffected by the sampling noise. Directional indices of COP filtered at 6 Hz showed high to very high reliability, with ICC range of 0.7-0.9. Results of a single 60 s trial are sufficient to reach acceptable reliability for both DI and SV. In conclusion, the directional sway measures may be recommended as the primary standard in static posturography. PMID:28149395

Uncertainties in detecting decadal change in extractable soil elements in Northern Forests

NASA Astrophysics Data System (ADS)

Bartlett, O.; Bailey, S. W.; Ducey, M. J.

2016-12-01

Northern Forest ecosystems have been or are being impacted by land use change, forest harvesting, acid deposition, atmospheric CO2 enrichment, and climate change. Each of these has the potential to modify soil forming processes, and the resulting chemical stocks. Horizontal and vertical variations in concentrations complicate determination of temporal change. This study evaluates sample design, sample size, and differences among observers as sources of uncertainty when quantifying soil temporal change over regional scales. Forty permanent, northern hardwood, monitoring plots were established on the White Mountain National Forest in central New Hampshire and western Maine. Soil pits were characterized and sampled by genetic horizon at plot center in 2001 and resampled again in 2014 two-meters on contour from the original sampling location. Each soil horizon was characterized by depth, color, texture, structure, consistency, boundaries, coarse fragments, and roots from the forest floor to the upper C horizon, the relatively unaltered glacial till parent material. Laboratory analyses included pH in 0.01 M CaCl2 solution and extractable Ca, Mg, Na, K, Al, Mn, and P in 1 M NH4OAc solution buffered at pH 4.8. Significant elemental differences were identified by genetic horizon from paired t-tests (p ≤ 0.05) indicate temporal change across the study region. Power analysis, 0.9 power (α = 0.05), revealed sampling size was appropriate within this region to detect concentration change by genetic horizon using a stratified sample design based on topographic metrics. There were no significant differences between observers' descriptions of physical properties. As physical properties would not be expected to change over a decade, this suggests spatial variation in physical properties between the pairs of sampling pits did not detract from our ability to detect temporal change. These results suggest that resampling efforts within a site, repeated across a region, to quantify elemental change by carefully described genetic horizons is an appropriate method of detecting soil temporal change in this region. Sample size and design considerations from this project will have direct implications for future monitoring programs to characterize change in soil chemistry.

Mortality rates of pathogen indicator microorganisms discharged from point and non-point sources in an urban area.

PubMed

Kim, Geonha; Hur, Jin

2010-01-01

This research measured the mortality rates of pathogen indicator microorganisms discharged from various point and non-point sources in an urban area. Water samples were collected from a domestic sewer, a combined sewer overflow, the effluent of a wastewater treatment plant, and an urban river. Mortality rates of indicator microorganisms in sediment of an urban river were also measured. Mortality rates of indicator microorganisms in domestic sewage, estimated by assuming first order kinetics at 20 degrees C were 0.197 day(-1), 0.234 day(-1), 0.258 day(-1) and 0.276 day(-1) for total coliform, fecal coliform, Escherichia coli, and fecal streptococci, respectively. Effects of temperature, sunlight irradiation and settlement on the mortality rate were measured. Results of this research can be used as input data for water quality modeling or can be used as design factors for treatment facilities.

Bias in groundwater samples caused by wellbore flow

USGS Publications Warehouse

Reilly, Thomas E.; Franke, O. Lehn; Bennett, Gordon D.

1989-01-01

Proper design of physical installations and sampling procedures for groundwater monitoring networks is critical for the detection and analysis of possible contaminants. Monitoring networks associated with known contaminant sources sometimes include an array of monitoring wells with long well screens. The purpose of this paper is: (a) to report the results of a numerical experiment indicating that significant borehole flow can occur within long well screens installed in homogeneous aquifers with very small head differences in the aquifer (less than 0.01 feet between the top and bottom of the screen); (b) to demonstrate that contaminant monitoring wells with long screens may completely fail to fulfill their purpose in many groundwater environments.

Lead poisoning as possible cause of deaths at the Swedish House at Kapp Thordsen, Spitsbergen, winter 1872-3

PubMed Central

Kjær, Kjell G

2009-01-01

Objective To investigate cause of death in 17 sealers who died in the Swedish house in Kapp Thordsen, Spitsbergen, during the winter of 1872-3. Design Analysis of skeletal samples from one sealer’s grave. Setting Field trip to Spitsbergen to exhume skeletal remains. Subjects One of 17 sailors who died in 1872-3. Results No objective signs of scurvy were found. The concentration of lead in the bone samples was 102.05 µg/g. Conclusions The high concentrations of lead indicate that this man died from lead poisoning, probably from food tins. The absence of macroscopic signs of scurvy supports this theory. PMID:19965937

Sampling Designs in Qualitative Research: Making the Sampling Process More Public

ERIC Educational Resources Information Center

Onwuegbuzie, Anthony J.; Leech, Nancy L.

2007-01-01

The purpose of this paper is to provide a typology of sampling designs for qualitative researchers. We introduce the following sampling strategies: (a) parallel sampling designs, which represent a body of sampling strategies that facilitate credible comparisons of two or more different subgroups that are extracted from the same levels of study;…

A 30 mK, 13.5 T scanning tunneling microscope with two independent tips

DOE Office of Scientific and Technical Information (OSTI.GOV)

Roychowdhury, Anita; Center for Nanophysics and Advanced Materials, Department of Physics, University of Maryland, College Park, Maryland 20740; Gubrud, M. A.

We describe the design, construction, and performance of an ultra-low temperature, high-field scanning tunneling microscope (STM) with two independent tips. The STM is mounted on a dilution refrigerator and operates at a base temperature of 30 mK with magnetic fields of up to 13.5 T. We focus on the design of the two-tip STM head, as well as the sample transfer mechanism, which allows in situ transfer from an ultra high vacuum preparation chamber while the STM is at 1.5 K. Other design details such as the vibration isolation and rf-filtered wiring are also described. Their effectiveness is demonstrated viamore » spectral current noise characteristics and the root mean square roughness of atomic resolution images. The high-field capability is shown by the magnetic field dependence of the superconducting gap of Cu{sub x}Bi{sub 2}Se{sub 3}. Finally, we present images and spectroscopy taken with superconducting Nb tips with the refrigerator at 35 mK that indicate that the effective temperature of our tips/sample is approximately 184 mK, corresponding to an energy resolution of 16 μeV.« less

Using multivariate generalizability theory to assess the effect of content stratification on the reliability of a performance assessment.

PubMed

Keller, Lisa A; Clauser, Brian E; Swanson, David B

2010-12-01

In recent years, demand for performance assessments has continued to grow. However, performance assessments are notorious for lower reliability, and in particular, low reliability resulting from task specificity. Since reliability analyses typically treat the performance tasks as randomly sampled from an infinite universe of tasks, these estimates of reliability may not be accurate. For tests built according to a table of specifications, tasks are randomly sampled from different strata (content domains, skill areas, etc.). If these strata remain fixed in the test construction process, ignoring this stratification in the reliability analysis results in an underestimate of "parallel forms" reliability, and an overestimate of the person-by-task component. This research explores the effect of representing and misrepresenting the stratification appropriately in estimation of reliability and the standard error of measurement. Both multivariate and univariate generalizability studies are reported. Results indicate that the proper specification of the analytic design is essential in yielding the proper information both about the generalizability of the assessment and the standard error of measurement. Further, illustrative D studies present the effect under a variety of situations and test designs. Additional benefits of multivariate generalizability theory in test design and evaluation are also discussed.

X-ray opacity measurements in mid-Z dense plasmas with a new target design of indirect heating

NASA Astrophysics Data System (ADS)

Dozières, M.; Thais, F.; Bastiani-Ceccotti, S.; Blenski, T.; Fariaut, J.; Fölsner, W.; Gilleron, F.; Khaghani, D.; Pain, J.-C.; Reverdin, C.; Rosmej, F.; Silvert, V.; Soullié, G.; Villette, B.

2015-12-01

X-ray transmission spectra of copper, nickel and aluminum laser produced plasmas were measured at the LULI2000 laser facility with an improved target design of indirect heating. Measurements were performed in plasmas close to local thermodynamic equilibrium at temperatures around 25 eV and densities between 10-3g/cm3 and 10-2 g/cm3. This improved design provides several advantages, which are discussed in this paper. The sample is a thin foil of mid-Z material inserted between two gold cavities heated by two 300J, 2ω, nanosecond laser beams. A third laser beam irradiates a gold foil to create a spectrally continuous X-ray source (backlight) used to probe the sample. We investigate 2p-3d absorption structures in Ni and Cu plasmas as well as 1s-2p transitions in an additional Al plasma layer to infer the in-situ plasma temperature. Geometric and hydrodynamic calculations indicate that the improved geometry reduces spatial gradients during the transmission measurements. Experimental absorption spectra are in good agreement with calculations from the hybrid atomic physics code SCO-RCG.

Estimation of river and stream temperature trends under haphazard sampling

USGS Publications Warehouse

Gray, Brian R.; Lyubchich, Vyacheslav; Gel, Yulia R.; Rogala, James T.; Robertson, Dale M.; Wei, Xiaoqiao

2015-01-01

Long-term temporal trends in water temperature in rivers and streams are typically estimated under the assumption of evenly-spaced space-time measurements. However, sampling times and dates associated with historical water temperature datasets and some sampling designs may be haphazard. As a result, trends in temperature may be confounded with trends in time or space of sampling which, in turn, may yield biased trend estimators and thus unreliable conclusions. We address this concern using multilevel (hierarchical) linear models, where time effects are allowed to vary randomly by day and date effects by year. We evaluate the proposed approach by Monte Carlo simulations with imbalance, sparse data and confounding by trend in time and date of sampling. Simulation results indicate unbiased trend estimators while results from a case study of temperature data from the Illinois River, USA conform to river thermal assumptions. We also propose a new nonparametric bootstrap inference on multilevel models that allows for a relatively flexible and distribution-free quantification of uncertainties. The proposed multilevel modeling approach may be elaborated to accommodate nonlinearities within days and years when sampling times or dates typically span temperature extremes.

Quantitative passive soil vapor sampling for VOCs--part 1: theory.

PubMed

McAlary, Todd; Wang, Xiaomin; Unger, Andre; Groenevelt, Hester; Górecki, Tadeusz

2014-03-01

Volatile organic compounds are the primary chemicals of concern at many contaminated sites and soil vapor sampling and analysis is a valuable tool for assessing the nature and extent of contamination. Soil gas samples are typically collected by applying vacuum to a probe in order to collect a whole-gas sample, or by drawing gas through a tube filled with an adsorbent (active sampling). There are challenges associated with flow and vacuum levels in low permeability materials, and leak prevention and detection during active sample collection can be cumbersome. Passive sampling has been available as an alternative to conventional gas sample collection for decades, but quantitative relationships between the mass of chemicals sorbed, the soil vapor concentrations, and the sampling time have not been established. This paper presents transient and steady-state mathematical models of radial vapor diffusion to a drilled hole and considerations for passive sampler sensitivity and practical sampling durations. The results indicate that uptake rates in the range of 0.1 to 1 mL min(-1) will minimize the starvation effect for most soil moisture conditions and provide adequate sensitivity for human health risk assessment with a practical sampling duration. This new knowledge provides a basis for improved passive soil vapour sampler design.

A novel rotating experimental platform in a superconducting magnet.

PubMed

Chen, Da; Cao, Hui-Ling; Ye, Ya-Jing; Dong, Chen; Liu, Yong-Ming; Shang, Peng; Yin, Da-Chuan

2016-08-01

This paper introduces a novel platform designed to be used in a strong static magnetic field (in a superconducting magnet). The platform is a sample holder that rotates in the strong magnetic field. Any samples placed in the platform will rotate due to the rotation of the sample holder. With this platform, a number of experiments such as material processing, culture of biological systems, chemical reactions, or other processes can be carried out. In this report, we present some preliminary experiments (protein crystallization, cell culture, and seed germination) conducted using this platform. The experimental results showed that the platform can affect the processes, indicating that it provides a novel environment that has not been investigated before and that the effects of such an environment on many different physical, chemical, or biological processes can be potentially useful for applications in many fields.

A primer set to determine sex in the small Indian mongoose, Herpestes auropunctatus.

PubMed

Murata, C; Ogura, G; Kuroiwa, A

2011-03-01

To enable the accurate sexing of individuals of introduced populations of the small Indian mongoose, Herpestes auropunctatus, we designed a primer set for the amplification of the sex-specific fragments EIF2S3Y and EIF2S3X. Using this primer set, the expected amplification products were obtained for all samples of genomic DNA tested: males yielded two bands and females a single band. Sequencing of each PCR product confirmed that the 769-bp fragment amplified from DNA samples of both sexes was derived from EIF2S3X, whereas the 546-bp fragment amplified only from male DNA samples was derived from EIF2S3Y. The results indicated that this primer set is useful for sex identification in this species. © 2010 Blackwell Publishing Ltd.

Visual comparison testing of automotive paint simulation

NASA Astrophysics Data System (ADS)

Meyer, Gary; Fan, Hua-Tzu; Seubert, Christopher; Evey, Curtis; Meseth, Jan; Schnackenberg, Ryan

2015-03-01

An experiment was performed to determine whether typical industrial automotive color paint comparisons made using real physical samples could also be carried out using a digital simulation displayed on a calibrated color television monitor. A special light booth, designed to facilitate evaluation of the car paint color with reflectance angle, was employed in both the real and virtual color comparisons. Paint samples were measured using a multi-angle spectrophotometer and were simulated using a commercially available software package. Subjects performed the test quicker using the computer graphic simulation, and results indicate that there is only a small difference between the decisions made using the light booth and the computer monitor. This outcome demonstrates the potential of employing simulations to replace some of the time consuming work with real physical samples that still characterizes material appearance work in industry.

A Typology of Mixed Methods Sampling Designs in Social Science Research

ERIC Educational Resources Information Center

Onwuegbuzie, Anthony J.; Collins, Kathleen M. T.

2007-01-01

This paper provides a framework for developing sampling designs in mixed methods research. First, we present sampling schemes that have been associated with quantitative and qualitative research. Second, we discuss sample size considerations and provide sample size recommendations for each of the major research designs for quantitative and…

Disparities in Reportable Quality Metrics by Insurance Status in the Primary Spine Neoplasm Population

PubMed Central

Mehdi, Syed K.; Tanenbaum, Joseph E.; Alentado, Vincent J.; Miller, Jacob A.; Lubelski, Daniel; Benzel, Edward C.; Mroz, Thomas E.

2017-01-01

STUDY DESIGN Retrospective cohort study. BACKGROUND CONTEXT CMS defines “adverse quality events” as the incidence of certain complications such as post-surgical hematoma and/or iatrogenic pneumothorax during an inpatient stay. Patient safety indicators (PSI) are a means to measure the incidence of these adverse events. When these occur, reimbursement to the hospital decreases. The incidence of adverse quality events among patients hospitalized for primary spinal neoplasms is unknown. Similarly, it is unclear what the impact of insurance status is on adverse care quality among this patient population. PURPOSE We aimed to determine the incidence of patient safety indicators (PSI) among patients admitted with primary spinal neoplasms, and to determine the association between insurance status and the incidence of PSI in this population. STUDY DESIGN Retrospective cohort design PATIENT SAMPLE All patients, 18 years and older, in the Nationwide Inpatient Sample (NIS) that were hospitalized for primary spine neoplasms from 1998–2011. OUTCOME MEASURES Incidence of PSI from 1998–2011. METHODS The Nationwide Inpatient Sample (NIS) was queried for all hospitalizations with a diagnosis of primary spinal neoplasm during the inpatient episode from 1998–2011. Incidence of PSI was determined using publicly available lists of ICD-9-CM diagnosis codes. Logistic regression models were used to determine the effect of primary payer status on PSI incidence. All comparisons were made between privately insured patients and Medicaid/self-pay patients. RESULTS We identified 6,095 hospitalizations in which a primary spinal neoplasm was recorded during the inpatient episode. We excluded patients younger than 18 years as well as those with “other” or “missing” primary insurance status, leaving 5,880 patients for analysis. After adjusting for patient demographics and hospital characteristics, Medicaid/self-pay patients had significantly greater odds of experiencing one or more PSI (OR 1.81 95% CI 1.11– 2.95) relative to privately insured patients. CONCLUSIONS Among patients hospitalized for primary spinal neoplasms, primary payer status predicts the incidence of PSI, an indicator of adverse healthcare quality used to determine hospital reimbursement by CMS. As reimbursement continues to be intertwined with reportable quality metrics, identifying vulnerable populations is critical to improving patient care. PMID:27664341

Condition monitoring and fault diagnosis of motor bearings using undersampled vibration signals from a wireless sensor network

NASA Astrophysics Data System (ADS)

Lu, Siliang; Zhou, Peng; Wang, Xiaoxian; Liu, Yongbin; Liu, Fang; Zhao, Jiwen

2018-02-01

Wireless sensor networks (WSNs) which consist of miscellaneous sensors are used frequently in monitoring vital equipment. Benefiting from the development of data mining technologies, the massive data generated by sensors facilitate condition monitoring and fault diagnosis. However, too much data increase storage space, energy consumption, and computing resource, which can be considered fatal weaknesses for a WSN with limited resources. This study investigates a new method for motor bearings condition monitoring and fault diagnosis using the undersampled vibration signals acquired from a WSN. The proposed method, which is a fusion of the kurtogram, analog domain bandpass filtering, bandpass sampling, and demodulated resonance technique, can reduce the sampled data length while retaining the monitoring and diagnosis performance. A WSN prototype was designed, and simulations and experiments were conducted to evaluate the effectiveness and efficiency of the proposed method. Experimental results indicated that the sampled data length and transmission time of the proposed method result in a decrease of over 80% in comparison with that of the traditional method. Therefore, the proposed method indicates potential applications on condition monitoring and fault diagnosis of motor bearings installed in remote areas, such as wind farms and offshore platforms.

Robust superhydrophobic needle-like nanostructured ZnO surfaces prepared without post chemical-treatment

NASA Astrophysics Data System (ADS)

Velayi, Elmira; Norouzbeigi, Reza

2017-12-01

Robust superhydrophobic ZnO surfaces with micro/nano hybrid hierarchical structures were synthesized on the stainless steel mesh by a facile single-step chemical bath deposition (CBD) method without using further low surface energy materials. The Taguchi L16 experimental design was applied to evaluate the effects of reaction time, type and concentration of the additive, type of the chelating agent, and the molar ratio of the chelating agent to the initial zinc (II) ions. The prepared sample at the optimal conditions exhibited a sustainable and time-independent superhydrophobic behavior with the water contact angle (WCA) of 162.8° ± 2.5° and contact angle hysteresis (CAH) of 1.8° ± 0.5°. The XRD, SEM, TEM and FTIR analyses were used to characterize the prepared samples. Surface characterization using scanning electron microscopy (SEM) indicated accumulation of micro/nano branched ZnO needles on the substrate with the average diameters of ∼85 nm. After 20 abrasion cycles the optimum sample indicated an excellent mechanical robustness via exposure to the pressure of 4.7 kPa. A suitable chemical resistance to the acidic and basic droplets with the pH range of 4 and 9 was observed.

An exploratory study of the relationship between resilience, academic burnout and psychological health in nursing students.

PubMed

Ríos-Risquez, Mª Isabel; García-Izquierdo, Mariano; Sabuco-Tebar, Emiliana de Los Angeles; Carrillo-Garcia, Cesar; Martinez-Roche, Maria Emilia

2016-08-01

The purpose of this study was to examine the relationship between resilience, academic burnout and psychological health in a sample of nursing students. A descriptive and cross-sectional design was applied, with questionnaires as tools. The convenience sample consisted of 113 nursing students in their final academic year, who voluntarily participated in the study. The results indicated a statistically significant relationship between resilience and both emotional exhaustion (r = -.55; p < .01) and psychological health (r = -.62; p < .01), as well as between all three dimensions of burnout and psychological health. Hierarchical multiple regression analysis indicated that high scores for resilience and low scores for emotional exhaustion predict better perceived psychological health [F (2.96)  = 17.75; p < .001]. Resilience was associated with lower levels of psychological discomfort and academic burnout. These findings highlight the importance of developing resilience and integrating it as an element in the nursing educational programme.

The Impact of Asking Intention or Self-Prediction Questions on Subsequent Behavior

PubMed Central

Wood, Chantelle; Conner, Mark; Miles, Eleanor; Sandberg, Tracy; Taylor, Natalie; Godin, Gaston; Sheeran, Paschal

2015-01-01

The current meta-analysis estimated the magnitude of the impact of asking intention and self-prediction questions on rates of subsequent behavior, and examined mediators and moderators of this question–behavior effect (QBE). Random-effects meta-analysis on 116 published tests of the effect indicated that intention/prediction questions have a small positive effect on behavior (d+ = 0.24). Little support was observed for attitude accessibility, cognitive dissonance, behavioral simulation, or processing fluency explanations of the QBE. Multivariate analyses indicated significant effects of social desirability of behavior/behavior domain (larger effects for more desirable and less risky behaviors), difficulty of behavior (larger effects for easy-to-perform behaviors), and sample type (larger effects among student samples). Although this review controls for co-occurrence of moderators in multivariate analyses, future primary research should systematically vary moderators in fully factorial designs. Further primary research is also needed to unravel the mechanisms underlying different variants of the QBE. PMID:26162771

Analysis of nanoliter samples of electrolytes using a flow-through microfluorometer.

PubMed

Zhelyaskov, V R; Liu, S; Broderick, M P

2000-04-01

Several techniques have been developed to study the transport properties of nanoliter samples of renal tubule segments, such as continuous flow colorimetry and continuous fluorometry. We have extended the capability of the NANOFLO, a flow-through microfluorometer, designed for measurement of carbon dioxide, urea, ammonia, glucose, lactate, etc., to analyze sodium, calcium and chloride ions, using three commercially available fluorescent indicators for intracellular and extracellular measurements. The selection of fluorescent indicator for each electrolyte was dependent on the optimal match of the dissociation constant and the analyte concentration range of interest. Using Fluo-3 dye we achieved a detection limit for Ca2+ of 0.1 pmol and selectivity over Mg2+ of between 7:1 to 10:1. Using sodium green dye we achieved detection limit for Na+ of 12 pmol and a selectivity over K+ of 40:1. The detection limit for Cl- using lucigenin dye was 10 pmol. This technique can be readily adapted for the measurement of other physiologically important ultralow volume.

Exploration of malingering indices in the Wechsler Adult Intelligence Scale-Fourth Edition Digit Span subtest.

PubMed

Reese, Caitlin S; Suhr, Julie A; Riddle, Tara L

2012-03-01

Prior research shows that Digit Span is a useful embedded measure of malingering. However, the Wechsler Adult Intelligence Scale-IV (Wechsler, 2008) altered Digit Span in meaningful ways, necessitating another look at Digit Span as an embedded measure of malingering. Using a simulated malingerer design, we examined the predictive accuracy of existing Digit Span validity indices and explored whether patterns of performance utilizing the new version would provide additional evidence for malingering. Undergraduates with a history of mild head injury performed with best effort or simulated impaired cognition and were also compared with a large sample of non-head-injured controls. Previously established cutoffs for the age-corrected scaled score and Reliable Digit Span (RDS) performed similarly in the present samples. Patterns of RDS length using all three subscales of the new scale were different in malingerers when compared with both head-injured and non-head-injured controls. Two potential alternative RDS scores were introduced, which showed better sensitivity than the traditional RDS, while retaining specificity to malingering.

Evaluation of emotion-based messages designed to motivate Hispanic and Asian parents of early adolescents to engage in calcium-rich food and beverage parenting practices.

PubMed

Banna, Jinan Corinne; Reicks, Marla; Gunther, Carolyn; Richards, Rickelle; Bruhn, Christine; Cluskey, Mary; Wong, Siew Sun; Misner, Scottie; Hongu, Nobuko; Johnston, N Paul

2016-08-01

Setting healthful beverage expectations, making calcium-rich foods and beverages (CRF/B) available, and role modeling are parenting practices promoting calcium intake among early adolescents. This study aimed to evaluate emotion-based messages designed to motivate parents of early adolescents to perform these practices. Emotion-based messages were developed for each parenting practice and tested in 35 parents from 5 states. Findings were used to modify messages and develop a survey administered via Amazon MechanicalTurk to a convenience sample of Asian (n = 166) and Hispanic (n = 184) parents of children 10-13 years. Main outcome measures were message comprehension, motivation, relevance, acceptability, and novelty. Engagement in the parenting practices was also assessed. Message comprehension was acceptable for the majority of parents. Most also agreed that messages were motivational (setting healthful beverage expectations (69.0%), making CRF/B available (67.4%), and role modeling (80.0%)), relevant and acceptable. About 30-50% indicated they had not seen the information before. Many parents indicated they were already engaging in the practices (> 70%). No racial/ethnic differences were observed for responses to messages or engaging in parenting practices. Results indicate that emotion-based messages designed to motivate parents to engage in parenting practices that promote calcium intake among early adolescents were motivating, relevant, and acceptable.

23 CFR Appendix A to Part 1340 - Sample Design

Code of Federal Regulations, 2011 CFR

2011-04-01

... 23 Highways 1 2011-04-01 2011-04-01 false Sample Design A Appendix A to Part 1340 Highways... OBSERVATIONAL SURVEYS OF SEAT BELT USE Pt. 1340, App. A Appendix A to Part 1340—Sample Design Following is a description of a sample design that meets the final survey guidelines and, based upon NHTSA's experience in...

Passive air sampling using semipermeable membrane devices at different wind-speeds in situ calibrated by performance reference compounds.

PubMed

Söderström, Hanna S; Bergqvist, Per-Anders

2004-09-15

Semipermeable membrane devices (SPMDs) are passive samplers used to measure the vapor phase of organic pollutants in air. This study tested whether extremely high wind-speeds during a 21-day sampling increased the sampling rates of polycyclic aromatic hydrocarbons (PAHs) and polychlorinated biphenyls (PCBs), and whether the release of performance reference compounds (PRCs) was related to the uptakes at different wind-speeds. Five samplers were deployed in an indoor, unheated, and dark wind tunnel with different wind-speeds at each site (6-50 m s(-1)). In addition, one sampler was deployed outside the wind tunnel and one outside the building. To test whether a sampler, designed to reduce the wind-speeds, decreased the uptake and release rates, each sampler in the wind tunnel included two SPMDs positioned inside a protective device and one unprotected SPMD outside the device. The highest amounts of PAHs and PCBs were found in the SPMDs exposed to the assumed highest wind-speeds. Thus, the SPMD sampling rates increased with increasing wind-speeds, indicating that the uptake was largely controlled by the boundary layer at the membrane-air interface. The coefficient of variance (introduced by the 21-day sampling and the chemical analysis) for the air concentrations of three PAHs and three PCBs, calculated using the PRC data, was 28-46%. Thus, the PRCs had a high ability to predict site effects of wind and assess the actual sampling situation. Comparison between protected and unprotected SPMDs showed that the sampler design reduced the wind-speed inside the devices and thereby the uptake and release rates.

Quality Control Algorithms and Proposed Integration Process for Wind Profilers Used by Launch Vehicle Systems

NASA Technical Reports Server (NTRS)

Decker, Ryan; Barbre, Robert E., Jr.

2011-01-01

Impact of winds to space launch vehicle include Design, Certification Day-of-launch (DOL) steering commands (1)Develop "knockdowns" of load indicators (2) Temporal uncertainty of flight winds. Currently use databases from weather balloons. Includes discrete profiles and profile pair datasets. Issues are : (1)Larger vehicles operate near design limits during ascent 150 discrete profiles per month 110-217 seasonal 2.0 and 3.5-hour pairs Balloon rise time (one hour) and drift (up to 100 n mi) Advantages of the Alternative approach using Doppler Radar Wind Profiler (DRWP) are: (1) Obtain larger sample size (2) Provide flexibility for assessing trajectory changes due to winds (3) Better representation of flight winds.

Understanding the motivations of the multigenerational physician assistant workforce.

PubMed

Lopes, John E; Delellis, Nailya O

2013-10-01

Physician assistants (PAs) are more frequently finding themselves in positions where they are responsible for staff recruitment and retention. Staff turnover is associated with significant financial costs for organizations. Motivational theories focusing on job design indicate that paying attention to a combination of factors related to the work itself, in addition to the environment where the work is performed, increases satisfaction. This study asked a convenience sample of practicing PAs to rate the importance of a number of work-related factors known to influence job satisfaction. The results may be used as a basis for designing an environment to increase job satisfaction and improve recruitment and retention of highly qualified staff.

Marital Conflict and Conduct Problems in Children of Twins

PubMed Central

Harden, K. Paige; Turkheimer, Eric; Emery, Robert E.; D’Onofrio, Brian M.; Slutske, Wendy S.; Heath, Andrew C.; Martin, Nicholas G.

2010-01-01

The Children-of-Twins design was used to test whether associations between marital conflict frequency and conduct problems can be replicated within the children of discordant twin pairs. A sample of 2,051 children (age 14–39 years) of 1,045 twins was used to estimate the genetic and environmental influences on marital conflict and determine whether genetic or environmental selection processes underlie the observed association between marital conflict and conduct problems. Results indicate that genetic and nonshared environmental factors influence the risk of marital conflict. Furthermore, genetic influences mediated the association between marital conflict frequency and conduct problems. These results highlight the need for quasiexperimental designs in investigations of intergenerational associations. PMID:17328690

Marital conflict and conduct problems in Children of Twins.

PubMed

Harden, K Paige; Turkheimer, Eric; Emery, Robert E; D'Onofrio, Brian M; Slutske, Wendy S; Heath, Andrew C; Martin, Nicholas G

2007-01-01

The Children-of-Twins design was used to test whether associations between marital conflict frequency and conduct problems can be replicated within the children of discordant twin pairs. A sample of 2,051 children (age 14-39 years) of 1,045 twins was used to estimate the genetic and environmental influences on marital conflict and determine whether genetic or environmental selection processes underlie the observed association between marital conflict and conduct problems. Results indicate that genetic and nonshared environmental factors influence the risk of marital conflict. Furthermore, genetic influences mediated the association between marital conflict frequency and conduct problems. These results highlight the need for quasiexperimental designs in investigations of intergenerational associations.

Long-wavelength Low-intensity Photon Therapy (LLPT) for Traumatic Brain Injuries

DTIC Science & Technology

2010-09-08

analysis . These estimates are based on the variability in previously published experiments. Design: For each in vivo model of TBI, rats will be...ATP, GSH, apoptotic indicators, mitochondrial function, and changes in the levels of NSE and S100B proteins will be examined. Analysis of ATP, GSH...or to be run with the sample size intended. In particular, the weight drop assays were limited to the analysis of GSH levels. The cortical contusion

AIDS prevention and college students: male and female responses to "fear-provoking" messages.

PubMed

Johnson, K; LaTour, M S

1991-01-01

This study was designed to examine the effects of fear appeals in AIDS prevention messages and to determine whether or not males and females differ in their response to these appeals. MANOVA results from a sample of 179 junior and senior business students at a mid-Atlantic urban university indicate that significant differences in message effects were associated with type of appeal, gender of the respondent, and the interaction between appeal and gender.

[Process indicators and result indicators in the control of arterial hypertension].

PubMed

Dalfó Baqué, A; Sisó Almirall, A; Vila Coll, M A; Núñez Vázquez, S; Botinas Martí, M; Gibert Llorach, E

2000-12-01

To find whether better compliance with the indicators of procedure of a hypertension monitoring programme guarantees better control in the final blood pressure figures. Descriptive cross-sectional study. Gòtic Area Health Centre, Barcelona. Annual audit through random sampling of the computerised records of all the hypertense patients attended at the centre in each of 5 years (1992, n = 337; 1993, n = 318; 1994, n = 322; 1995, n = 325; 1996, n = 325). 1. Procedure indicators: complete physical examination took place in 1996 in only 12% of cases, proportion similar to at the start of the development of the programme (12.2%). Completion of at least two of the three records of protocols (complete physical examination, ECG and analysis) dropped during the period and did not cover half the patients. Screening of the various cardiovascular risk factors (CRF) increased markedly in the 1992-1995 period. 2. RESULTS INDICATORS: The proportion of patients under 66 with SP and DP < 140 and 99 mmHg went up from 23.2% in 1992 to 45.2% in 1996. In the over-65 age-group, it went from 58.9% in 1992 to 81.2% in 1996. The procedure indicators are still useful, in that they are necessary for designing a new hypertension programme. However, we must not forget that any health programme is designed in order to achieve good control and population impact (survival) results. The procedure is only an aid to reach these aims.

The mobilization of aluminum in a natural soil system: Effects of hydrologic pathways

USGS Publications Warehouse

Cozzarelli, Isabelle M.; Herman, Janet S.; Parnell, Roderic A.

1987-01-01

A two-component soil water flow model was used in conjunction with an equilibrium speciation model WATEQF to study aluminum mobility in soils of a forested watershed, White Oak Run, in the Shenandoah National Park, Virginia. Soil solution samples, taken from the O, E, B, C1, and C2horizons, were collected from zero-tension lysimeters designed to collect faster gravitational macropore flow and tension lysimeters designed to collect slower capillary micropore flow. Dissolved aluminum was fractionated into acid-soluble, inorganic monomeric, and organic monomeric aluminum. Soil water aluminum concentrations decreased with depth indicating that the deep soil is a sink for aluminum. All waters contained significant concentrations of acid-soluble aluminum and exhibited a negative correlation between pH and the inorganic monomeric aluminum concentrations. Water in the shallow soil showed distinctly different chemical compositions for the two flow types, while C horizon micropore and macropore waters were more similar. Because of its shorter residence time, water flowing in deep soil macropores underwent less extensive neutralization and immobilization of aqueous aluminum than micropore water. The O horizon macropore waters were undersaturated for all hydroxide, silicate, and sulfate mineral phases considered. The C horizon samples from both flow types were near equilibrium with respect to kaolinite and synthetic gibbsite, indicating that mineral solubility controls water chemistry in the deep soil, while organic substances are the key control in the shallow macropore waters.

Scanning in situ Spectroscopy platform for imaging surgical breast tissue specimens

PubMed Central

Krishnaswamy, Venkataramanan; Laughney, Ashley M.; Wells, Wendy A.; Paulsen, Keith D.; Pogue, Brian W.

2013-01-01

A non-contact localized spectroscopic imaging platform has been developed and optimized to scan 1x1cm2 square regions of surgically resected breast tissue specimens with ~150-micron resolution. A color corrected, image-space telecentric scanning design maintained a consistent sampling geometry and uniform spot size across the entire imaging field. Theoretical modeling in ZEMAX allowed estimation of the spot size, which is equal at both the center and extreme positions of the field with ~5% variation across the designed waveband, indicating excellent color correction. The spot sizes at the center and an extreme field position were also measured experimentally using the standard knife-edge technique and were found to be within ~8% of the theoretical predictions. Highly localized sampling offered inherent insensitivity to variations in background absorption allowing direct imaging of local scattering parameters, which was validated using a matrix of varying concentrations of Intralipid and blood in phantoms. Four representative, pathologically distinct lumpectomy tissue specimens were imaged, capturing natural variations in tissue scattering response within a given pathology. Variations as high as 60% were observed in the average reflectance and relative scattering power images, which must be taken into account for robust classification performance. Despite this variation, the preliminary data indicates discernible scatter power contrast between the benign vs malignant groups, but reliable discrimination of pathologies within these groups would require investigation into additional contrast mechanisms. PMID:23389199

Retail Marijuana Purchases in Designer and Commercial Markets in New York City: Sales Units, Weights, and Prices per Gram

PubMed Central

Sifaneck, Stephen J.; Ream, Geoffrey L.; Johnson, Bruce D.; Dunlap, Eloise

2007-01-01

This paper documents the bifurcation of the market for commercial marijuana from the market for designer marijuana in New York City. Commercial marijuana is usually grown outdoors, imported to NYC, and of average quality. By contrast, several strains of designer marijuana are usually grown indoors from specially-bred strains and carefully handled for maximum quality. The mechanisms for selling include street/park sellers, delivery services, private sales, and storefronts. Retail sales units vary from $5 to $50 and more, but the actual weights and price per gram of retail marijuana purchases lacks scientific precision. Ethnographic staff recruited marijuana purchasers who used digital scales to weigh a purposive sample of 99 marijuana purchases. Results indicate clear differences in price per gram between the purchases of commercial (avg. $8.20/gram) and designer (avg. $18.02/gram) marijuana. Designer purchases are more likely to be made by whites, downtown (Lower East Side/Union Square area), via delivery services, and in units of $10 bags, $50 cubes, and eighth and quarter ounces. Commercial marijuana purchases are more likely to be made by blacks, uptown (Harlem), via street dealers, and in units of $5 and $20 bags. Imported commercial types Arizona and Chocolate were only found uptown, while designer brand names describing actual strains like Sour Diesel and White Widow were only found downtown. Findings indicate clear divisions between commercial and designer marijuana markets in New York City. The extent that these differences may be based upon different THC potencies is a matter for future research. PMID:17055670

Total sulfur determination in gasoline, kerosene and diesel fuel using inductively coupled plasma optical emission spectrometry after direct sample introduction as detergent emulsions

NASA Astrophysics Data System (ADS)

Santelli, Ricardo Erthal; Oliveira, Eliane Padua; de Carvalho, Maria de Fátima Batista; Bezerra, Marcos Almeida; Freire, Aline Soares

2008-07-01

Herein, we present the development of a procedure for the determination of total sulfur in petroleum-derived products (gasoline, kerosene and diesel fuel) employing inductively coupled plasma optical emission spectrometry (ICP OES). For this procedure, samples were prepared as emulsions that were made using concentrated nitric acid, Triton X-100, sample, and ultra pure water in proportions of 5/10/7/78% (v/v), respectively. Sample volumes were weighed because of the density differences, and oxygen was added to the sheat gas entrance of the ICP OES in order to decrease carbon deposition in the torch and to minimize background effects. A Doehlert design was applied as an experimental matrix to investigate the flow ratios of argon (sheat and plasma gas) and oxygen in relation to the signal-to-background ratio. A comparative study among the slopes of the analytical curves built in aqueous media, surfactant/HNO 3, and by spike addition for several sample emulsions indicates that a unique solution of surfactant in acidic media can be employed to perform the external calibration for analysis of the emulsions. The developed procedure allows for the determination of the total sulfur content in petroleum derivatives with a limit of detection (LOD) and limit of quantification (LOQ) of 0.72 and 2.4 μg g - 1 , respectively. Precision values, expressed as the relative standard deviations (% RSD, n = 10) for 12 and 400 μg g - 1 , were 2.2% and 1.3%, respectively. The proposed procedure was applied toward the determination of total sulfur in samples of gasoline, kerosene, and diesel fuel commercialized in the city of Niterói/RJ, Brazil. The accuracy of the proposed method was evaluated by the determination of the total sulfur in three different standard reference materials (SRM): NIST 2723a (sulfur in diesel fuel oil), NIST 1616b (sulfur in kerosene), and NIST 2298 (sulfur in gasoline). The data indicate that the methodology can be successfully applied to these types of samples. Spiking tests, conducted with the analyzed samples, indicate that recoveries are between 97 and 103%.

Water quality assessment of Australian ports using water quality evaluation indices

PubMed Central

Jahan, Sayka

2017-01-01

Australian ports serve diverse and extensive activities, such as shipping, tourism and fisheries, which may all impact the quality of port water. In this work water quality monitoring at different ports using a range of water quality evaluation indices was applied to assess the port water quality. Seawater samples at 30 stations in the year 2016–2017 from six ports in NSW, Australia, namely Port Jackson, Botany, Kembla, Newcastle, Yamba and Eden, were investigated to determine the physicochemical and biological variables that affect the port water quality. The large datasets obtained were designed to determine the Water Quality Index, Heavy metal Evaluation Index, Contamination Index and newly developed Environmental Water Quality Index. The study revealed medium water quality index and high and medium heavy metal evaluation index at three of the study ports and high contamination index in almost all study ports. Low level dissolved oxygen and higher level of total dissolved solids, turbidity, fecal coliforms, copper, iron, lead, zinc, manganese, cadmium and cobalt are mainly responsible for the poor water qualities of the port areas. Good water quality at the background samples indicated that various port activities are the likely cause for poor water quality inside the port area. PMID:29244876

Development and validation of the Spanish-English Language Proficiency Scale (SELPS).

PubMed

Smyk, Ekaterina; Restrepo, M Adelaida; Gorin, Joanna S; Gray, Shelley

2013-07-01

This study examined the development and validation of a criterion-referenced Spanish-English Language Proficiency Scale (SELPS) that was designed to assess the oral language skills of sequential bilingual children ages 4-8. This article reports results for the English proficiency portion of the scale. The SELPS assesses syntactic complexity, grammatical accuracy, verbal fluency, and lexical diversity based on 2 story retell tasks. In Study 1, 40 children were given 2 story retell tasks to evaluate the reliability of parallel forms. In Study 2, 76 children participated in the validation of the scale against language sample measures and teacher ratings of language proficiency. Study 1 indicated no significant differences between the SELPS scores on the 2 stories. Study 2 indicated that the SELPS scores correlated significantly with their counterpart language sample measures. Correlations between the SELPS and teacher ratings were moderate. The 2 story retells elicited comparable SELPS scores, providing a valuable tool for test-retest conditions in the assessment of language proficiency. Correlations between the SELPS scores and external variables indicated that these measures assessed the same language skills. Results provided empirical evidence regarding the validity of inferences about language proficiency based on the SELPS score.

Adaptive web sampling.

PubMed

Thompson, Steven K

2006-12-01

A flexible class of adaptive sampling designs is introduced for sampling in network and spatial settings. In the designs, selections are made sequentially with a mixture distribution based on an active set that changes as the sampling progresses, using network or spatial relationships as well as sample values. The new designs have certain advantages compared with previously existing adaptive and link-tracing designs, including control over sample sizes and of the proportion of effort allocated to adaptive selections. Efficient inference involves averaging over sample paths consistent with the minimal sufficient statistic. A Markov chain resampling method makes the inference computationally feasible. The designs are evaluated in network and spatial settings using two empirical populations: a hidden human population at high risk for HIV/AIDS and an unevenly distributed bird population.

Cryogenic Liquid Sample Acquisition System for Remote Space Applications

NASA Technical Reports Server (NTRS)

Mahaffy, Paul; Trainer, Melissa; Wegel, Don; Hawk, Douglas; Melek, Tony; Johnson, Christopher; Amato, Michael; Galloway, John

2013-01-01

There is a need to acquire autonomously cryogenic hydrocarbon liquid sample from remote planetary locations such as the lakes of Titan for instruments such as mass spectrometers. There are several problems that had to be solved relative to collecting the right amount of cryogenic liquid sample into a warmer spacecraft, such as not allowing the sample to boil off or fractionate too early; controlling the intermediate and final pressures within carefully designed volumes; designing for various particulates and viscosities; designing to thermal, mass, and power-limited spacecraft interfaces; and reducing risk. Prior art inlets for similar instruments in spaceflight were designed primarily for atmospheric gas sampling and are not useful for this front-end application. These cryogenic liquid sample acquisition system designs for remote space applications allow for remote, autonomous, controlled sample collections of a range of challenging cryogenic sample types. The design can control the size of the sample, prevent fractionation, control pressures at various stages, and allow for various liquid sample levels. It is capable of collecting repeated samples autonomously in difficult lowtemperature conditions often found in planetary missions. It is capable of collecting samples for use by instruments from difficult sample types such as cryogenic hydrocarbon (methane, ethane, and propane) mixtures with solid particulates such as found on Titan. The design with a warm actuated valve is compatible with various spacecraft thermal and structural interfaces. The design uses controlled volumes, heaters, inlet and vent tubes, a cryogenic valve seat, inlet screens, temperature and cryogenic liquid sensors, seals, and vents to accomplish its task.

Dynamic Method for Identifying Collected Sample Mass

NASA Technical Reports Server (NTRS)

Carson, John

2008-01-01

G-Sample is designed for sample collection missions to identify the presence and quantity of sample material gathered by spacecraft equipped with end effectors. The software method uses a maximum-likelihood estimator to identify the collected sample's mass based on onboard force-sensor measurements, thruster firings, and a dynamics model of the spacecraft. This makes sample mass identification a computation rather than a process requiring additional hardware. Simulation examples of G-Sample are provided for spacecraft model configurations with a sample collection device mounted on the end of an extended boom. In the absence of thrust knowledge errors, the results indicate that G-Sample can identify the amount of collected sample mass to within 10 grams (with 95-percent confidence) by using a force sensor with a noise and quantization floor of 50 micrometers. These results hold even in the presence of realistic parametric uncertainty in actual spacecraft inertia, center-of-mass offset, and first flexibility modes. Thrust profile knowledge is shown to be a dominant sensitivity for G-Sample, entering in a nearly one-to-one relationship with the final mass estimation error. This means thrust profiles should be well characterized with onboard accelerometers prior to sample collection. An overall sample-mass estimation error budget has been developed to approximate the effect of model uncertainty, sensor noise, data rate, and thrust profile error on the expected estimate of collected sample mass.

Evaluation of new technique of sterilization using biological indicator.

PubMed

Sheth, Nomal Chintan; Rathod, Yogesh V; Shenoi, Pratima R; Shori, Deepa D; Khode, Rajiv T; Khadse, Amruta P

2017-01-01

A novel technique of sterilization of endodontic files is introduced in this article. Newly introduced sterilization unit, named "SteriFast" is compared with autoclave and glass bead sterilizer using biological indicator. Spore strips of Bacillus pumilus were cultured in nutrient broth. This cultured media was used to contaminate the experimental samples of endodontic files. These contaminated files were sterilized using three different techniques. The sterilized files were transferred into nutrient medium under aseptic condition. The results were observed after 24 h, 48 h, and 7 days. The results showed that autoclave and new sterilization device (SteriFast) showed complete sterilization. The files sterilized using glass bead sterilizer showed bacterial growth (80%). Thus, it proves that autoclave and SteriFast are ideal techniques of sterilization of endodontic files. Glass bead sterilizer does not completely sterilize the files. The article also compares SteriFast and autoclave in other aspects such as its design, basic principle, advantages, and disadvantages. The article also describes features and design of SteriFast, used for all kind of small dental instruments.

Design of a fast computer-based partial discharge diagnostic system

NASA Technical Reports Server (NTRS)

Oliva, Jose R.; Karady, G. G.; Domitz, Stan

1991-01-01

Partial discharges cause progressive deterioration of insulating materials working in high voltage conditions and may lead ultimately to insulator failure. Experimental findings indicate that deterioration increases with the number of discharges and is consequently proportional to the magnitude and frequency of the applied voltage. In order to obtain a better understanding of the mechanisms of deterioration produced by partial discharges, instrumentation capable of individual pulse resolution is required. A new computer-based partial discharge detection system was designed and constructed to conduct long duration tests on sample capacitors. This system is capable of recording large number of pulses without dead time and producing valuable information related to amplitude, polarity, and charge content of the discharges. The operation of the system is automatic and no human supervision is required during the testing stage. Ceramic capacitors were tested at high voltage in long duration tests. The obtained results indicated that the charge content of partial discharges shift towards high levels of charge as the level of deterioration in the capacitor increases.

The costs of evaluating species densities and composition of snakes to assess development impacts in amazonia.

PubMed

Fraga, Rafael de; Stow, Adam J; Magnusson, William E; Lima, Albertina P

2014-01-01

Studies leading to decision-making for environmental licensing often fail to provide accurate estimates of diversity. Measures of snake diversity are regularly obtained to assess development impacts in the rainforests of the Amazon Basin, but this taxonomic group may be subject to poor detection probabilities. Recently, the Brazilian government tried to standardize sampling designs by the implementation of a system (RAPELD) to quantify biological diversity using spatially-standardized sampling units. Consistency in sampling design allows the detection probabilities to be compared among taxa, and sampling effort and associated cost to be evaluated. The cost effectiveness of detecting snakes has received no attention in Amazonia. Here we tested the effects of reducing sampling effort on estimates of species densities and assemblage composition. We identified snakes in seven plot systems, each standardised with 14 plots. The 250 m long centre line of each plot followed an altitudinal contour. Surveys were repeated four times in each plot and detection probabilities were estimated for the 41 species encountered. Reducing the number of observations, or the size of the sampling modules, caused significant loss of information on species densities and local patterns of variation in assemblage composition. We estimated the cost to find a snake as $ 120 U.S., but general linear models indicated the possibility of identifying differences in assemblage composition for half the overall survey costs. Decisions to reduce sampling effort depend on the importance of lost information to target-issues, and may not be the preferred option if there is the potential for identifying individual snake species requiring specific conservation actions. However, in most studies of human disturbance on species assemblages, it is likely to be more cost-effective to focus on other groups of organisms with higher detection probabilities.

Detection of anabolic androgenic steroid abuse in doping control using mammalian reporter gene bioassays.

PubMed

Houtman, Corine J; Sterk, Saskia S; van de Heijning, Monique P M; Brouwer, Abraham; Stephany, Rainer W; van der Burg, Bart; Sonneveld, Edwin

2009-04-01

Anabolic androgenic steroids (AAS) are a class of steroid hormones related to the male hormone testosterone. They are frequently detected as drugs in sport doping control. Being similar to or derived from natural male hormones, AAS share the activation of the androgen receptor (AR) as common mechanism of action. The mammalian androgen responsive reporter gene assay (AR CALUX bioassay), measuring compounds interacting with the AR can be used for the analysis of AAS without the necessity of knowing their chemical structure beforehand, whereas current chemical-analytical approaches may have difficulty in detecting compounds with unknown structures, such as designer steroids. This study demonstrated that AAS prohibited in sports and potential designer AAS can be detected with this AR reporter gene assay, but that also additional steroid activities of AAS could be found using additional mammalian bioassays for other types of steroid hormones. Mixtures of AAS were found to behave additively in the AR reporter gene assay showing that it is possible to use this method for complex mixtures as are found in doping control samples, including mixtures that are a result of multi drug use. To test if mammalian reporter gene assays could be used for the detection of AAS in urine samples, background steroidal activities were measured. AAS-spiked urine samples, mimicking doping positive samples, showed significantly higher androgenic activities than unspiked samples. GC-MS analysis of endogenous androgens and AR reporter gene assay analysis of urine samples showed how a combined chemical-analytical and bioassay approach can be used to identify samples containing AAS. The results indicate that the AR reporter gene assay, in addition to chemical-analytical methods, can be a valuable tool for the analysis of AAS for doping control purposes.

Optimization of food materials for development of nutritious pasta utilizing groundnut meal and beetroot.

PubMed

Mridula, D; Gupta, R K; Bhadwal, Sheetal; Khaira, Harjot; Tyagi, S K

2016-04-01

Present study was undertaken to optimize the level of food materials viz. groundnut meal, beetroot juice and refined wheat flour for development of nutritious pasta using response surface methodology. Box-benken design of experiments was used to design different experimental combinations considering 10 to 20 g groundnut meal, 6 to 18 mL beetroot juice and 80 to 90 g refined wheat flour. Quality attributes such as protein content, antioxidant activity, colour, cooking quality (solid loss, rehydration ratio and cooking time) and sensory acceptability of pasta samples were the dependent variables for the study. The results revealed that pasta samples with higher levels of groundnut meal and beetroot juice were high in antioxidant activity and overall sensory acceptability. The samples with higher content of groundnut meal indicated higher protein contents in them. On the other hand, the samples with higher beetroot juice content were high in rehydration ratio and lesser cooking time along with low solid loss in cooking water. The different level of studied food materials significantly affected the colour quality of pasta samples. Optimized combination for development of nutritious pasta consisted of 20 g groundnut meal, 18 mL beetroot juice and 83.49 g refined wheat flour with overall desirability as 0.905. This pasta sample required 5.5 min to cook and showed 1.37 % solid loss and rehydration ratio as 6.28. Pasta sample prepared following optimized formulation provided 19.56 % protein content, 23.95 % antioxidant activity and 125.89 mg/100 g total phenols with overall sensory acceptability scores 8.71.

Effective sampling range of a synthetic protein-based attractant for Ceratitis capitata (Diptera: Tephritidae).

PubMed

Epsky, Nancy D; Espinoza, Hernán R; Kendra, Paul E; Abernathy, Robert; Midgarden, David; Heath, Robert R

2010-10-01

Studies were conducted in Honduras to determine effective sampling range of a female-targeted protein-based synthetic attractant for the Mediterranean fruit fly, Ceratitis capitata (Wiedemann) (Diptera: Tephritidae). Multilure traps were baited with ammonium acetate, putrescine, and trimethylamine lures (three-component attractant) and sampled over eight consecutive weeks. Field design consisted of 38 traps (over 0.5 ha) placed in a combination of standard and high-density grids to facilitate geostatistical analysis, and tests were conducted in coffee (Coffea arabica L.),mango (Mangifera indica L.),and orthanique (Citrus sinensis X Citrus reticulata). Effective sampling range, as determined from the range parameter obtained from experimental variograms that fit a spherical model, was approximately 30 m for flies captured in tests in coffee or mango and approximately 40 m for flies captured in orthanique. For comparison, a release-recapture study was conducted in mango using wild (field-collected) mixed sex C. capitata and an array of 20 baited traps spaced 10-50 m from the release point. Contour analysis was used to document spatial distribution of fly recaptures and to estimate effective sampling range, defined by the area that encompassed 90% of the recaptures. With this approach, effective range of the three-component attractant was estimated to be approximately 28 m, similar to results obtained from variogram analysis. Contour maps indicated that wind direction had a strong influence on sampling range, which was approximately 15 m greater upwind compared with downwind from the release point. Geostatistical analysis of field-captured insects in appropriately designed trapping grids may provide a supplement or alternative to release-recapture studies to estimate sampling ranges for semiochemical-based trapping systems.

The Costs of Evaluating Species Densities and Composition of Snakes to Assess Development Impacts in Amazonia

PubMed Central

de Fraga, Rafael; Stow, Adam J.; Magnusson, William E.; Lima, Albertina P.

2014-01-01

Studies leading to decision-making for environmental licensing often fail to provide accurate estimates of diversity. Measures of snake diversity are regularly obtained to assess development impacts in the rainforests of the Amazon Basin, but this taxonomic group may be subject to poor detection probabilities. Recently, the Brazilian government tried to standardize sampling designs by the implementation of a system (RAPELD) to quantify biological diversity using spatially-standardized sampling units. Consistency in sampling design allows the detection probabilities to be compared among taxa, and sampling effort and associated cost to be evaluated. The cost effectiveness of detecting snakes has received no attention in Amazonia. Here we tested the effects of reducing sampling effort on estimates of species densities and assemblage composition. We identified snakes in seven plot systems, each standardised with 14 plots. The 250 m long centre line of each plot followed an altitudinal contour. Surveys were repeated four times in each plot and detection probabilities were estimated for the 41 species encountered. Reducing the number of observations, or the size of the sampling modules, caused significant loss of information on species densities and local patterns of variation in assemblage composition. We estimated the cost to find a snake as $ 120 U.S., but general linear models indicated the possibility of identifying differences in assemblage composition for half the overall survey costs. Decisions to reduce sampling effort depend on the importance of lost information to target-issues, and may not be the preferred option if there is the potential for identifying individual snake species requiring specific conservation actions. However, in most studies of human disturbance on species assemblages, it is likely to be more cost-effective to focus on other groups of organisms with higher detection probabilities. PMID:25147930

Evaluating the effect of disturbed ensemble distributions on SCFG based statistical sampling of RNA secondary structures.

PubMed

Scheid, Anika; Nebel, Markus E

2012-07-09

Over the past years, statistical and Bayesian approaches have become increasingly appreciated to address the long-standing problem of computational RNA structure prediction. Recently, a novel probabilistic method for the prediction of RNA secondary structures from a single sequence has been studied which is based on generating statistically representative and reproducible samples of the entire ensemble of feasible structures for a particular input sequence. This method samples the possible foldings from a distribution implied by a sophisticated (traditional or length-dependent) stochastic context-free grammar (SCFG) that mirrors the standard thermodynamic model applied in modern physics-based prediction algorithms. Specifically, that grammar represents an exact probabilistic counterpart to the energy model underlying the Sfold software, which employs a sampling extension of the partition function (PF) approach to produce statistically representative subsets of the Boltzmann-weighted ensemble. Although both sampling approaches have the same worst-case time and space complexities, it has been indicated that they differ in performance (both with respect to prediction accuracy and quality of generated samples), where neither of these two competing approaches generally outperforms the other. In this work, we will consider the SCFG based approach in order to perform an analysis on how the quality of generated sample sets and the corresponding prediction accuracy changes when different degrees of disturbances are incorporated into the needed sampling probabilities. This is motivated by the fact that if the results prove to be resistant to large errors on the distinct sampling probabilities (compared to the exact ones), then it will be an indication that these probabilities do not need to be computed exactly, but it may be sufficient and more efficient to approximate them. Thus, it might then be possible to decrease the worst-case time requirements of such an SCFG based sampling method without significant accuracy losses. If, on the other hand, the quality of sampled structures can be observed to strongly react to slight disturbances, there is little hope for improving the complexity by heuristic procedures. We hence provide a reliable test for the hypothesis that a heuristic method could be implemented to improve the time scaling of RNA secondary structure prediction in the worst-case - without sacrificing much of the accuracy of the results. Our experiments indicate that absolute errors generally lead to the generation of useless sample sets, whereas relative errors seem to have only small negative impact on both the predictive accuracy and the overall quality of resulting structure samples. Based on these observations, we present some useful ideas for developing a time-reduced sampling method guaranteeing an acceptable predictive accuracy. We also discuss some inherent drawbacks that arise in the context of approximation. The key results of this paper are crucial for the design of an efficient and competitive heuristic prediction method based on the increasingly accepted and attractive statistical sampling approach. This has indeed been indicated by the construction of prototype algorithms.

Evaluating the effect of disturbed ensemble distributions on SCFG based statistical sampling of RNA secondary structures

PubMed Central

2012-01-01

Background Over the past years, statistical and Bayesian approaches have become increasingly appreciated to address the long-standing problem of computational RNA structure prediction. Recently, a novel probabilistic method for the prediction of RNA secondary structures from a single sequence has been studied which is based on generating statistically representative and reproducible samples of the entire ensemble of feasible structures for a particular input sequence. This method samples the possible foldings from a distribution implied by a sophisticated (traditional or length-dependent) stochastic context-free grammar (SCFG) that mirrors the standard thermodynamic model applied in modern physics-based prediction algorithms. Specifically, that grammar represents an exact probabilistic counterpart to the energy model underlying the Sfold software, which employs a sampling extension of the partition function (PF) approach to produce statistically representative subsets of the Boltzmann-weighted ensemble. Although both sampling approaches have the same worst-case time and space complexities, it has been indicated that they differ in performance (both with respect to prediction accuracy and quality of generated samples), where neither of these two competing approaches generally outperforms the other. Results In this work, we will consider the SCFG based approach in order to perform an analysis on how the quality of generated sample sets and the corresponding prediction accuracy changes when different degrees of disturbances are incorporated into the needed sampling probabilities. This is motivated by the fact that if the results prove to be resistant to large errors on the distinct sampling probabilities (compared to the exact ones), then it will be an indication that these probabilities do not need to be computed exactly, but it may be sufficient and more efficient to approximate them. Thus, it might then be possible to decrease the worst-case time requirements of such an SCFG based sampling method without significant accuracy losses. If, on the other hand, the quality of sampled structures can be observed to strongly react to slight disturbances, there is little hope for improving the complexity by heuristic procedures. We hence provide a reliable test for the hypothesis that a heuristic method could be implemented to improve the time scaling of RNA secondary structure prediction in the worst-case – without sacrificing much of the accuracy of the results. Conclusions Our experiments indicate that absolute errors generally lead to the generation of useless sample sets, whereas relative errors seem to have only small negative impact on both the predictive accuracy and the overall quality of resulting structure samples. Based on these observations, we present some useful ideas for developing a time-reduced sampling method guaranteeing an acceptable predictive accuracy. We also discuss some inherent drawbacks that arise in the context of approximation. The key results of this paper are crucial for the design of an efficient and competitive heuristic prediction method based on the increasingly accepted and attractive statistical sampling approach. This has indeed been indicated by the construction of prototype algorithms. PMID:22776037

Self-esteem and apparel satisfaction with appropriate clothing: value of product attributes and support groups for mastectomy survivors.

PubMed

Chowdhary, Usha; Ryan, Lenoraann

2003-08-01

The study examined use of appropriately designed clothing for special needs of postmastectomy women, including associations with self-esteem and satisfaction with certain apparel. The study was also designed to identify the person and product attributes valued by postmastectomy women while shopping for apparel items. A pre-posttest research design was used to examine the association of intervention, the self-esteem, and apparel satisfaction of the sample. Descriptive statistics were used for general information, as well as person and product attributes, and t tests were applied to test the two hypotheses. Analysis indicated that the intervention enhanced apparel satisfaction; however, the differences were not significant for self-esteem. The participants used support groups and evaluated several product attributes before making the apparel purchases. Implications for education, research, and service are discussed.

An analytical approach to Sr isotope ratio determination in Lambrusco wines for geographical traceability purposes.

PubMed

Durante, Caterina; Baschieri, Carlo; Bertacchini, Lucia; Bertelli, Davide; Cocchi, Marina; Marchetti, Andrea; Manzini, Daniela; Papotti, Giulia; Sighinolfi, Simona

2015-04-15

Geographical origin and authenticity of food are topics of interest for both consumers and producers. Among the different indicators used for traceability studies, (87)Sr/(86)Sr isotopic ratio has provided excellent results. In this study, two analytical approaches for wine sample pre-treatment, microwave and low temperature mineralisation, were investigated to develop accurate and precise analytical method for (87)Sr/(86)Sr determination. The two procedures led to comparable results (paired t-test, with t

Optimizing liquid effluent monitoring at a large nuclear complex.

PubMed

Chou, Charissa J; Barnett, D Brent; Johnson, Vernon G; Olson, Phil M

2003-12-01

Effluent monitoring typically requires a large number of analytes and samples during the initial or startup phase of a facility. Once a baseline is established, the analyte list and sampling frequency may be reduced. Although there is a large body of literature relevant to the initial design, few, if any, published papers exist on updating established effluent monitoring programs. This paper statistically evaluates four years of baseline data to optimize the liquid effluent monitoring efficiency of a centralized waste treatment and disposal facility at a large defense nuclear complex. Specific objectives were to: (1) assess temporal variability in analyte concentrations, (2) determine operational factors contributing to waste stream variability, (3) assess the probability of exceeding permit limits, and (4) streamline the sampling and analysis regime. Results indicated that the probability of exceeding permit limits was one in a million under normal facility operating conditions, sampling frequency could be reduced, and several analytes could be eliminated. Furthermore, indicators such as gross alpha and gross beta measurements could be used in lieu of more expensive specific isotopic analyses (radium, cesium-137, and strontium-90) for routine monitoring. Study results were used by the state regulatory agency to modify monitoring requirements for a new discharge permit, resulting in an annual cost savings of US dollars 223,000. This case study demonstrates that statistical evaluation of effluent contaminant variability coupled with process knowledge can help plant managers and regulators streamline analyte lists and sampling frequencies based on detection history and environmental risk.

Investigating early stages of biocorrosion with XPS: AISI 304 stainless steel exposed to Burkholderia species

NASA Astrophysics Data System (ADS)

Johansson, Leena-Sisko; Saastamoinen, Tuomas

1999-04-01

We have investigated the interactions of an exopolymer-producing bacteria, Burkholderia sp. with polished AISI 304 stainless steel substrates using X-ray photoelectron spectroscopy (XPS). Steel coupons were exposed to the pure bacteria culture in a specially designed flowcell for 6 h during which the experiment was monitored in situ with an optical microscope. XPS results verified the formation of biofilm containing extracellular polymer on all the samples exposed to bacteria. Sputter results indicated that some ions needed for metabolic processes were trapped within the biofilm. Changes in the relative Fe concentration and Fe 2p peak shape indicated that also iron had accumulated into the biofilm.

Disposable microfluidic sensor arrays for discrimination of antioxidants.

PubMed

Park, Seong H; Maruniak, Autumn; Kim, Jisun; Yi, Gi-Ra; Lim, Sung H

2016-06-01

A microfluidic colorimetric sensor array was developed for detection and identification of various antioxidants. The sensor was fabricated by a photolithographic method, and consists of an array of printed cross-responsive indicators. The microfluidic design also incorporates pre-activation spots to allow printing of chemically incompatible components separately. Separately printed oxidizer allowed an oxidation of adjacent redox indicators only when aqueous sample was added to the sensor cartridge. Antioxidants were primarily detected by measuring the extent of inhibition of this oxidation reaction. Using this flow-based technique, a clear differentiation of 8 different antioxidants and 4 different teas has been demonstrated with 98.5% sensitivity. Copyright © 2016 Elsevier B.V. All rights reserved.

Sampling animal sign in heterogeneous environments: how much is enough?

USGS Publications Warehouse

Holbrook, Joseph D.; Arkle, Robert S.; Rachlow, Janet L.; Vierling, Kerri T.; Pilliod, David S.

2015-01-01

Animal ecologists often use animal sign as a surrogate for direct observation of organisms, especially when species are secretive or difficult to observe. Spatial heterogeneity in arid environments makes it challenging to consistently detect and precisely characterize animal sign, which can bias estimates of animal abundance or habitat use. Piute ground squirrels (Urocitellus mollis) and Owyhee harvester ants (Pogonomyrmex salinus) live in arid environments and are fossorial, which can make them difficult to observe directly. Their relative abundance can be assessed using sign (i.e., burrows and nests). We implemented an over-sampling framework (i.e., recorded an excessive amount of information) with two observers to 1) identify a sampling intensity that balanced precision with our resource constraints, and 2) assess classification and detection of squirrel burrows and ant nests across vegetation conditions. We sampled 20 1-ha plots for ground squirrel burrows and ant nests using six 4 m × 100 m belt transects. Analyses of precision and sampling effort indicated that three belt transects covering 1200 m2 per ha provided sufficient precision, while minimizing effort. Regardless of vegetation conditions, counts by two observers were strongly correlated for ground squirrel burrows (r = 0.99, P < 0.001, df = 18; slope = 0.92) and harvester ant nests (r = 0.99, P < 0.001, df = 18; slope = 1.01) indicating observer consistency and perhaps high detection probability. These findings illustrate an approach for evaluating sampling designs in many ecological contexts.

Molecular characterization of chicken infectious anemia virus from contaminated live-virus vaccines.

PubMed

Li, Yang; Hu, Yan; Cui, Shuai; Fu, Jiayuan; Wang, Yixin; Cui, Zhizhong; Fang, Lichun; Chang, Shuang; Zhao, Peng

2017-05-01

The aim of this study was to investigate possible causes of the pervasiveness of chicken infectious anemia virus (CIAV) infection in chickens in recent years in China. A total of 14 batches of live-virus vaccines were examined using PCR to detect CIAV contamination, of which only 2 samples (a Newcastle disease vaccine and a fowl pox vaccine) tested positive for CIAV. These Newcastle and fowl pox vaccines were then inoculated into 1-day-old specific-pathogen-free chickens. Serum samples were collected from chickens infected with the PCR-positive vaccines, and these tested positive for CIAV-specific antibodies as tested using ELISA. In addition, DNA samples isolated from the serum samples also tested positive by PCR. The results indicated that the samples were contaminated with CIAV and identified 2 exogenous CIAV strains, designated CIAV-N22 and CIAV-F10, in the respective samples. The full genome sequences of these novel CIAV strains were sequenced and analyzed. Phylogenetic tree analysis indicated that the CIAV-F10 strain might represent a recombinant viral strain arising from the parental CIAV strains JQ690762 and KJ728816. Overall, the results suggested that vaccination with CIAV-contaminated vaccines contributed to the prevalence and spread of CIAV infection in chickens. Furthermore, the CIAV contaminant was likely subsequently transmitted to commercial chickens through congenital transmission. Our findings therefore highlight the need for more extensive screening of live-virus vaccines for poultry in China to reduce the threat of contamination with exogenous viruses. © 2016 Poultry Science Association Inc.

Husbandry and enclosure influences on penguin behavior and conservation breeding.

PubMed

Marshall, Andrew R; Deere, Nicolas J; Little, Holly A; Snipp, Ross; Goulder, Jackie; Mayer-Clarke, Stacey

2016-09-01

Multi-zoo comparisons of animal welfare are rare, and yet vital for ensuring continued improvement of zoo enclosures and husbandry. Methods are not standardized for the development of zoo enclosures based on multiple indicators, and case study species are required. This study compares behavior and breeding success to various enclosure and husbandry parameters for the Humboldt penguin, Spheniscus humboldti, for the development of improved enclosure design. Behavioral sampling was completed at Flamingo Land over a period of 8 months. Further data on behavior, enclosure design, and breeding success were collected via questionnaires, visits to zoos, and literature review. Breeding success was primarily influenced by colony age and number of breeding pairs, suggesting an important social influence on reproduction. Across zoos, there was also significant variation in behavior. The proportion of time spent in water varied between zoos (2-23%) and was used as an indicator of physical activity and natural behavior. Regression models revealed that water-use was best predicted by total enclosure area per penguin, followed by land area, with some evidence for positive influence of pool surface area per penguin. Predominantly linear/curvilinear increases in our biological indicators with enclosure parameters suggest that optimal conditions for S. humboldti were not met among the selected zoos. We propose revised minimum conditions for S. humboldti enclosure design, which exceed those in the existing husbandry guidelines. We present a framework for the evaluation of zoo enclosures and suggest that a rigorous scientific protocol be established for the design of new enclosures, based on multivariate methods. Zoo Biol. 35:385-397, 2016. © Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

Effect of storage temperature on endogenous GHB levels in urine.

PubMed

LeBeau, M A; Miller, M L; Levine, B

2001-06-15

Because gamma-hydroxybutyrate (GHB) is an endogenous substance present in the body and is rapidly eliminated after ingestion, toxicologists investigating drug-facilitated sexual assault cases are often asked to differentiate between endogenous and exogenous levels of GHB in urine samples. This study was designed to determine the effects of storage temperature on endogenous GHB levels in urine. Specifically, it was designed to ascertain whether endogenous levels can be elevated to a range considered indicative of GHB ingestion. Urine specimens from two subjects that had not been administered exogenous GHB were collected during a 24h period and individually pooled. The pooled specimens were separated into standard sample cups and divided into three storage groups: room temperature ( approximately 25 degrees C), refrigerated (5 degrees C), and frozen (-10 degrees C). Additionally, some specimens were put through numerous freeze/thaw cycles to mimic situations that may occur if multiple laboratories analyze the same specimen. Periodic analysis of the samples revealed increases in the levels of endogenous GHB over a 6-month period. The greatest increase (up to 404%) was observed in the samples maintained at room temperature. The refrigerated specimens showed increases of 140-208%, while the frozen specimens showed smaller changes (88-116%). The specimens subjected to multiple freeze/thaw cycles mirrored specimens that had been thawed only once. None of the stored urine specimens demonstrated increases in GHB concentrations that would be consistent with exogenous GHB ingestion.

SMAP L-Band Microwave Radiometer: Instrument Design and First Year on Orbit

NASA Technical Reports Server (NTRS)

Piepmeier, Jeffrey R.; Focardi, Paolo; Horgan, Kevin; Knuble, Joseph; Ehsan, Negar; Lucey, Jared; Brambora, Clifford; Brown, Paula R.; Hoffman, Pamela J.; French, Richard T.;

A matched case-control study of convenience store robbery risk factors.

PubMed

Hendricks, S A; Landsittel, D P; Amandus, H E; Malcan, J; Bell, J

1999-11-01

Convenience store clerks have been shown to be at high risk for assault and homicide, mostly owing to robbery or robbery attempts. Although the literature consistently indicates that at least some environmental designs are effective deterrents of robbery, the significance of individual interventions and policies has differed across past studies. To address these issues, a matched case-control study of 400 convenience store robberies in three metropolitan areas of Virginia was conducted. Conditional logistic regression was implemented to evaluate the significance of various environmental designs and other factors possibly related to convenience store robbery. Findings indicate that numerous characteristics of the surrounding environment and population were significantly associated with convenience store robbery. Results also showed that, on a univariate level, most crime prevention factors were significantly associated with a lower risk for robbery. Using a forward selection process, a multivariate model, which included cash handling policy, bullet-resistant shielding, and numerous characteristics of the surrounding area and population, was identified. This study addressed numerous limitations of the previous literature by prospectively collecting extensive data on a large sample of diverse convenience stores and directly addressing the current theory on the robbers' selection of a target store through a matched case-control design.

Design-based and model-based inference in surveys of freshwater mollusks

USGS Publications Warehouse

Dorazio, R.M.

1999-01-01

Well-known concepts in statistical inference and sampling theory are used to develop recommendations for planning and analyzing the results of quantitative surveys of freshwater mollusks. Two methods of inference commonly used in survey sampling (design-based and model-based) are described and illustrated using examples relevant in surveys of freshwater mollusks. The particular objectives of a survey and the type of information observed in each unit of sampling can be used to help select the sampling design and the method of inference. For example, the mean density of a sparsely distributed population of mollusks can be estimated with higher precision by using model-based inference or by using design-based inference with adaptive cluster sampling than by using design-based inference with conventional sampling. More experience with quantitative surveys of natural assemblages of freshwater mollusks is needed to determine the actual benefits of different sampling designs and inferential procedures.

Statistical methods for efficient design of community surveys of response to noise: Random coefficients regression models

NASA Technical Reports Server (NTRS)

Tomberlin, T. J.

1985-01-01

Research studies of residents' responses to noise consist of interviews with samples of individuals who are drawn from a number of different compact study areas. The statistical techniques developed provide a basis for those sample design decisions. These techniques are suitable for a wide range of sample survey applications. A sample may consist of a random sample of residents selected from a sample of compact study areas, or in a more complex design, of a sample of residents selected from a sample of larger areas (e.g., cities). The techniques may be applied to estimates of the effects on annoyance of noise level, numbers of noise events, the time-of-day of the events, ambient noise levels, or other factors. Methods are provided for determining, in advance, how accurately these effects can be estimated for different sample sizes and study designs. Using a simple cost function, they also provide for optimum allocation of the sample across the stages of the design for estimating these effects. These techniques are developed via a regression model in which the regression coefficients are assumed to be random, with components of variance associated with the various stages of a multi-stage sample design.

The corrosion effect of ozonated seawater solution on titanium in polymer generated crevice environments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Leveillee, S.Y.

1998-01-01

Two different tests were designed to evaluate the reaction of various polymers and grade-2 titanium in ozonated seawater in conjunction with a comparative analysis in an aerated seawater solution. The first was a weight loss test measuring the weight change of Polyvinyl chloride (PVC), Polyethylene and Teflon{trademark} in both ozonated and aerated artificial seawater baths. The second test was designed to induce crevice corrosion on the titanium test samples using various crevice generating materials in both ozonated and aerated solutions. The materials used to create the crevices were grade-2 titanium washers, PVC, Polyethylene, Saran and Teflon{trademark}. The weight loss testmore » showed that all three polymers lost weight in the ozonated bath. The results of the titanium washer crevice test provided no indication of corrosion or surface discoloration in either the ozonated or aerated solutions. Energy dispersive spectrometry (EDS) analysis found no fluorine, chlorine or other corrosion product. The PVC samples in the aerated bath also showed no signs of corrosion, but the PVC samples in the ozonated tank had light brown rings of surface discoloration. One of the ozonated PVC samples did show evidence of chlorine in the corrosion product. The outer circumference of the ozonated PVC washers exhibited the same type bleaching effect as in the weight loss samples, but the whitening of these samples were more pronounced. The polyethylene samples under aeration showed no discoloration or presence of fluorine or chlorine. The polyethylene crevice samples in the ozonated solution all exhibited the distinct brilliant blue color of titanium oxide. Fluorine was found in the corrosion product on only one of the samples. Chlorine was found on the surface of one of the other corrosion coupons. The results of the Teflon{trademark} crevice samples substantiated the previous Rensselaer study.« less

Merging National Forest and National Forest Health Inventories to Obtain an Integrated Forest Resource Inventory – Experiences from Bavaria, Slovenia and Sweden

PubMed Central

Kovač, Marko; Bauer, Arthur; Ståhl, Göran

2014-01-01

Backgrounds, Material and Methods To meet the demands of sustainable forest management and international commitments, European nations have designed a variety of forest-monitoring systems for specific needs. While the majority of countries are committed to independent, single-purpose inventorying, a minority of countries have merged their single-purpose forest inventory systems into integrated forest resource inventories. The statistical efficiencies of the Bavarian, Slovene and Swedish integrated forest resource inventory designs are investigated with the various statistical parameters of the variables of growing stock volume, shares of damaged trees, and deadwood volume. The parameters are derived by using the estimators for the given inventory designs. The required sample sizes are derived via the general formula for non-stratified independent samples and via statistical power analyses. The cost effectiveness of the designs is compared via two simple cost effectiveness ratios. Results In terms of precision, the most illustrative parameters of the variables are relative standard errors; their values range between 1% and 3% if the variables’ variations are low (s%<80%) and are higher in the case of higher variations. A comparison of the actual and required sample sizes shows that the actual sample sizes were deliberately set high to provide precise estimates for the majority of variables and strata. In turn, the successive inventories are statistically efficient, because they allow detecting the mean changes of variables with powers higher than 90%; the highest precision is attained for the changes of growing stock volume and the lowest for the changes of the shares of damaged trees. Two indicators of cost effectiveness also show that the time input spent for measuring one variable decreases with the complexity of inventories. Conclusion There is an increasing need for credible information on forest resources to be used for decision making and national and international policy making. Such information can be cost-efficiently provided through integrated forest resource inventories. PMID:24941120

Assessment of different surveillance systems for avian influenza in commercial poultry in Catalonia (North-Eastern Spain).

PubMed

Alba, A; Casal, J; Napp, S; Martin, P A J

2010-11-01

Compulsory surveillance programmes for avian influenza (AI) have been implemented in domestic poultry and wild birds in all the European Member States since 2005. The implementation of these programmes is complex and requires a close evaluation. A good indicator to assess their efficacy is the sensitivity (Se) of the surveillance system. In this study, the sensitivities for different sampling designs proposed by the Spanish authorities for the commercial poultry population of Catalonia were assessed, using the scenario tree model methodology. These samplings were stratified throughout the territory of Spain and took into account the species, the types of production and their specific risks. The probabilities of detecting infection at different prevalences at both individual and holding level were estimated. Furthermore, those subpopulations that contributed more to the Se of the system were identified. The model estimated that all the designs met the requirements of the European Commission. The probability of detecting AI circulating in Catalonian poultry did not change significantly when the within-holding design prevalence varied from 30% to 10%. In contrast, when the among-holding design prevalence decreased from 5% to 1%, the probability of detecting AI was drastically reduced. The sampling of duck and goose holdings, and to a lesser extent the sampling of turkey and game bird holdings, increased the Se substantially. The Se of passive surveillance in chickens for highly pathogenic avian influenza (HPAI) and low pathogenicity avian influenza (LPAI) were also assessed. The probability of the infected birds manifesting apparent clinical signs and the awareness of veterinarians and farmers had great influence on the probability of detecting AI. In order to increase the probability of an early detection of HPAI in chicken, the probability of performing AI specific tests when AI is suspected would need to be increased. Copyright © 2010 Elsevier B.V. All rights reserved.

Short-Term Effects of Different Loading Schemes in Fitness-Related Resistance Training.

PubMed

Eifler, Christoph

2016-07-01

Eifler, C. Short-term effects of different loading schemes in fitness-related resistance training. J Strength Cond Res 30(7): 1880-1889, 2016-The purpose of this investigation was to analyze the short-term effects of different loading schemes in fitness-related resistance training and to identify the most effective loading method for advanced recreational athletes. The investigation was designed as a longitudinal field-test study. Two hundred healthy mature subjects with at least 12 months' experience in resistance training were randomized in 4 samples of 50 subjects each. Gender distribution was homogenous in all samples. Training effects were quantified by 10 repetition maximum (10RM) and 1 repetition maximum (1RM) testing (pre-post-test design). Over a period of 6 weeks, a standardized resistance training protocol with 3 training sessions per week was realized. Testing and training included 8 resistance training exercises in a standardized order. The following loading schemes were randomly matched to each sample: constant load (CL) with constant volume of repetitions, increasing load (IL) with decreasing volume of repetitions, decreasing load (DL) with increasing volume of repetitions, daily changing load (DCL), and volume of repetitions. For all loading schemes, significant strength gains (p < 0.001) could be noted for all resistance training exercises and both dependent variables (10RM, 1RM). In all cases, DCL obtained significantly higher strength gains (p < 0.001) than CL, IL, and DL. There were no significant differences in strength gains between CL, IL, and DL. The present data indicate that resistance training following DCL is more effective for advanced recreational athletes than CL, IL, or DL. Considering that DCL is widely unknown in fitness-related resistance training, the present data indicate, there is potential for improving resistance training in commercial fitness clubs.

A comparison of survey methods to evaluate macrophyte index of biotic integrity performance in Minnesota lakes

USGS Publications Warehouse

Vondracek, Bruce C.; Koch, Justine D.; Beck, Marcus W.

2014-01-01

Aquatic macrophytes shape trophic web dynamics, provide food and refuge for macroinvertebrates and fish, and increase nutrient retention, sediment stabilization, and water clarity. Macrophytes are well-suited as indicators of ecological health because they are immobile, relatively easy to sample and identify, and respond to anthropogenic disturbance on an ecological time scale. Aquatic plant monitoring programs can provide valuable information to water resource managers, especially in conjunction with macrophyte-based indices of biotic integrity (IBI). However, there are several current sampling designs and the precision of IBI scores has not been evaluated across different surveys. We evaluated the performance of the Minnesota macrophyte-based IBI for two survey designs; a point intercept (PI) survey and a belt transect (BT) survey. PI surveys are time intensive, especially on large lakes, whereas BT are less time intensive and have been used historically in Minnesota. Our objectives were to compare the PI surveys with BT surveys on the same lakes, and to modify the BT survey (MT survey) to improve information obtained from BT surveys. BT surveys consistently overestimated IBI scores compared to the PI method (t = 6.268, df = 60, p < 0.001). Overall IBI scores calculated from MT surveys differed significantly from PI scores, but on average, MT surveys predicted scores only 3% lower than PI scores. Implementation of the Minnesota macrophyte-based IBI through the adoption of the MT survey approach would improve sampling efficiency and enable widespread documentation of the effects of landscape change, shifts in hydrologic regimes, and other anthropogenic activities on the integrity of lacustrine systems.

A males only clinic session.

PubMed

Stupples, A

1980-01-01

The pressure to establish the Dunedin (New Zealand) Male Advice Clinic came from members of the Psychology Department of the University of Otago as a result of a study of attitudes towards the use and purchase of contraceptives among the local young people. The study findings and the suggestions made for the establishment of a male advice center are summarized. 3 samples were studied: a university sample (N=80); a sample of high school students (N=243); and a general population sample (N=70). The males in all samples were questioned regarding the process of purchasing contraceptives. The study findings indicated that embarrassment functioned as an impediment to obtaining contraceptive supplies. 76% of the university sample, 36% of the school sample, and 57% of the general population thought that males needed advice in choosing condoms. The male advice center would be open to anyone but designed specifically to cater to young men who anticipate or are already engaged in sexual intercourse. Services available would include contraceptive advice, contraceptive supplies, and sexual advice and counseling. Initial interest in the Dunedin Male Advice Clinic was considerable, but the question remained as to whether the group for whom the clinic was intended was really reached.

A modular method for the extraction of DNA and RNA, and the separation of DNA pools from diverse environmental sample types

PubMed Central

Lever, Mark A.; Torti, Andrea; Eickenbusch, Philip; Michaud, Alexander B.; Šantl-Temkiv, Tina; Jørgensen, Bo Barker

2015-01-01

A method for the extraction of nucleic acids from a wide range of environmental samples was developed. This method consists of several modules, which can be individually modified to maximize yields in extractions of DNA and RNA or separations of DNA pools. Modules were designed based on elaborate tests, in which permutations of all nucleic acid extraction steps were compared. The final modular protocol is suitable for extractions from igneous rock, air, water, and sediments. Sediments range from high-biomass, organic rich coastal samples to samples from the most oligotrophic region of the world's oceans and the deepest borehole ever studied by scientific ocean drilling. Extraction yields of DNA and RNA are higher than with widely used commercial kits, indicating an advantage to optimizing extraction procedures to match specific sample characteristics. The ability to separate soluble extracellular DNA pools without cell lysis from intracellular and particle-complexed DNA pools may enable new insights into the cycling and preservation of DNA in environmental samples in the future. A general protocol is outlined, along with recommendations for optimizing this general protocol for specific sample types and research goals. PMID:26042110

A Practical, Robust Methodology for Acquiring New Observation Data Using Computationally Expensive Groundwater Models

NASA Astrophysics Data System (ADS)

Siade, Adam J.; Hall, Joel; Karelse, Robert N.

2017-11-01

Regional groundwater flow models play an important role in decision making regarding water resources; however, the uncertainty embedded in model parameters and model assumptions can significantly hinder the reliability of model predictions. One way to reduce this uncertainty is to collect new observation data from the field. However, determining where and when to obtain such data is not straightforward. There exist a number of data-worth and experimental design strategies developed for this purpose. However, these studies often ignore issues related to real-world groundwater models such as computational expense, existing observation data, high-parameter dimension, etc. In this study, we propose a methodology, based on existing methods and software, to efficiently conduct such analyses for large-scale, complex regional groundwater flow systems for which there is a wealth of available observation data. The method utilizes the well-established d-optimality criterion, and the minimax criterion for robust sampling strategies. The so-called Null-Space Monte Carlo method is used to reduce the computational burden associated with uncertainty quantification. And, a heuristic methodology, based on the concept of the greedy algorithm, is proposed for developing robust designs with subsets of the posterior parameter samples. The proposed methodology is tested on a synthetic regional groundwater model, and subsequently applied to an existing, complex, regional groundwater system in the Perth region of Western Australia. The results indicate that robust designs can be obtained efficiently, within reasonable computational resources, for making regional decisions regarding groundwater level sampling.

Using GIS to generate spatially balanced random survey designs for natural resource applications.

PubMed

Theobald, David M; Stevens, Don L; White, Denis; Urquhart, N Scott; Olsen, Anthony R; Norman, John B

2007-07-01

Sampling of a population is frequently required to understand trends and patterns in natural resource management because financial and time constraints preclude a complete census. A rigorous probability-based survey design specifies where to sample so that inferences from the sample apply to the entire population. Probability survey designs should be used in natural resource and environmental management situations because they provide the mathematical foundation for statistical inference. Development of long-term monitoring designs demand survey designs that achieve statistical rigor and are efficient but remain flexible to inevitable logistical or practical constraints during field data collection. Here we describe an approach to probability-based survey design, called the Reversed Randomized Quadrant-Recursive Raster, based on the concept of spatially balanced sampling and implemented in a geographic information system. This provides environmental managers a practical tool to generate flexible and efficient survey designs for natural resource applications. Factors commonly used to modify sampling intensity, such as categories, gradients, or accessibility, can be readily incorporated into the spatially balanced sample design.

Is the large simple trial design used for comparative, post-approval safety research? A review of a clinical trials registry and the published literature.

PubMed

Reynolds, Robert F; Lem, Joanna A; Gatto, Nicolle M; Eng, Sybil M

2011-10-01

Post-approval, observational drug safety studies face well known difficulties in controlling for confounding, particularly confounding by indication for drug use. A study design that addresses confounding by indication is the large simple trial (LST). LSTs are characterized by large sample sizes, often in the thousands; broad entry criteria consistent with the approved medication label; randomization based on equipoise, i.e. neither physician nor patient believes that one treatment option is superior; minimal, streamlined data collection requirements; objectively-measured endpoints (e.g. death, hospitalization); and follow-up that minimizes interventions or interference with normal clinical practice. In theory then, the LST is a preferred study design for drug and vaccine safety research because it controls for biases inherent to observational research while still providing results that are generalizable to 'real-world' use. To evaluate whether LSTs are used for comparative safety evaluation and if the design is, in fact, advantageous compared with other designs, we conducted a review of the published literature (1949 through 31 December 2010) and the ClinicalTrials.gov registry (2000 through 31 December 2010). Thirteen ongoing or completed safety LSTs were identified. The design has rarely been used in comparative drug safety research, which is due to the operational, financial and scientific hurdles of implementing the design. The studies that have been completed addressed important clinical questions and, in some cases, led to re-evaluation of medical practice. We conclude the design has demonstrated utility for comparative safety research of medicines and vaccines if the necessary scientific and operational conditions for its use are met.

Associations of daily pediatric asthma emergency department visits with air pollution in Newark, NJ: utilizing time-series and case-crossover study designs.

PubMed

Gleason, Jessie A; Fagliano, Jerald A

2015-10-01

Asthma is one of the most common chronic diseases affecting children. This study assesses the associations of ozone and fine particulate matter (PM2.5) with pediatric emergency department visits in the urban environment of Newark, NJ. Two study designs were utilized and evaluated for usability. We obtained daily emergency department visits among children aged 3-17 years with a primary diagnosis of asthma during April to September for 2004-2007. Both a time-stratified case-crossover study design with bi-directional control sampling and a time-series study design were utilized. Lagged effects (1-d through 5-d lag, 3-d average, and 5-d average) of ozone and PM2.5 were explored and a dose-response analysis comparing the bottom 5th percentile of 3-d average lag ozone with each 5 percentile increase was performed. Associations of interquartile range increase in same-day ozone were similar between the time-series and case-crossover study designs (RR = 1.08, 95% CI 1.04-1.12) and (OR = 1.10, 95% CI 1.06-1.14), respectively. Similar associations were seen for 1-day lag and 3-day average lag ozone levels. PM2.5 was not associated with the outcome in either study design. Dose-response assessment indicated a statistically significant and increasing association around 50-55 ppb consistent for both study designs. Ozone was statistically positively associated with pediatric asthma ED visits in Newark, NJ. Our results were generally comparable across the time-series and case-crossover study designs, indicating both are useful to assess local air pollution impacts.

Assessment of heavy metal contamination in water and sediments of Trepça and Sitnica rivers, Kosovo, using pollution indicators and multivariate cluster analysis.

PubMed

Ferati, Flora; Kerolli-Mustafa, Mihone; Kraja-Ylli, Arjana

2015-06-01

The concentrations of As, Cd, Cr, Co, Cu, Ni, Pb, and Zn in water and sediment samples from Trepça and Sitnica rivers were determined to assess the level of contamination. Six water and sediment samples were collected during the period from April to July 2014. Most of the water samples was found within the European and Kosovo permissible limits. The highest concentration of As, Cd, Pb, and Zn originates primarily from anthropogenic sources such discharge of industrial water from mining flotation and from the mine waste eroded from the river banks. Sediment contamination assessment was carried out using the pollution indicators such as contamination factor (CF), degree of contamination (Cd), modified degree of contamination (mCd), pollution load index (PLI), and geo-accumulation index (Igeo). The CF values for the investigated metals indicated a high contaminated nature of sediments, while the Cd values indicated a very high contamination degree of sediments. The mCd values indicate a high degree of contamination of Sitnica river sediment to ultrahigh degree of contamination of Trepça river sediment. The PLI values ranged from 1.89 to 14.1 which indicate that the heavy metal concentration levels in all investigated sites exceeded the background values and sediment quality guidelines. The average values of Igeo revealed the following ranking of intensity of heavy metal contamination of the Trepça and Sitnica river sediments: Cd > As > Pb > Zn > Cu > Co > Cr > Ni. Cluster analysis suggests that As, Cd, Cr, Co, Cu, Ni, Pb, and Zn are derived from anthropogenic sources, particularly discharges from mining flotation and erosion form waste from a zinc mine plant. In order to protect the sediments from further contamination, the designing of a monitoring network and reducing the anthropogenic discharges are suggested.

Study of sample drilling techniques for Mars sample return missions

NASA Technical Reports Server (NTRS)

Mitchell, D. C.; Harris, P. T.

1980-01-01

To demonstrate the feasibility of acquiring various surface samples for a Mars sample return mission the following tasks were performed: (1) design of a Mars rover-mounted drill system capable of acquiring crystalline rock cores; prediction of performance, mass, and power requirements for various size systems, and the generation of engineering drawings; (2) performance of simulated permafrost coring tests using a residual Apollo lunar surface drill, (3) design of a rock breaker system which can be used to produce small samples of rock chips from rocks which are too large to return to Earth, but too small to be cored with the Rover-mounted drill; (4)design of sample containers for the selected regolith cores, rock cores, and small particulate or rock samples; and (5) design of sample handling and transfer techniques which will be required through all phase of sample acquisition, processing, and stowage on-board the Earth return vehicle. A preliminary design of a light-weight Rover-mounted sampling scoop was also developed.

Early morning urine collection to improve urinary lateral flow LAM assay sensitivity in hospitalised patients with HIV-TB co-infection.

PubMed

Gina, Phindile; Randall, Philippa J; Muchinga, Tapuwa E; Pooran, Anil; Meldau, Richard; Peter, Jonny G; Dheda, Keertan

2017-05-12

Urine LAM testing has been approved by the WHO for use in hospitalised patients with advanced immunosuppression. However, sensitivity remains suboptimal. We therefore examined the incremental diagnostic sensitivity of early morning urine (EMU) versus random urine sampling using the Determine® lateral flow lipoarabinomannan assay (LF-LAM) in HIV-TB co-infected patients. Consenting HIV-infected inpatients, screened as part of a larger prospective randomized controlled trial, that were treated for TB, and could donate matched random and EMU samples were included. Thus paired sample were collected from the same patient, LF-LAM was graded using the pre-January 2014, with grade 1 and 2 manufacturer-designated cut-points (the latter designated grade 1 after January 2014). Single sputum Xpert-MTB/RIF and/or TB culture positivity served as the reference standard (definite TB). Those treated for TB but not meeting this standard were designated probable TB. 123 HIV-infected patients commenced anti-TB treatment and provided matched random and EMU samples. 33% (41/123) and 67% (82/123) had definite and probable TB, respectively. Amongst those with definite TB LF-LAM sensitivity (95%CI), using the grade 2 cut-point, increased from 12% (5-24; 5/43) to 39% (26-54; 16/41) with random versus EMU, respectively (p = 0.005). Similarly, amongst probable TB, LF-LAM sensitivity increased from 10% (5-17; 8/83) to 24% (16-34; 20/82) (p = 0.001). LF-LAM specificity was not determined. This proof of concept study indicates that EMU could improve the sensitivity of LF-LAM in hospitalised TB-HIV co-infected patients. These data have implications for clinical practice.

Improving Aquatic Warbler Population Assessments by Accounting for Imperfect Detection

PubMed Central

Oppel, Steffen; Marczakiewicz, Piotr; Lachmann, Lars; Grzywaczewski, Grzegorz

2014-01-01

Monitoring programs designed to assess changes in population size over time need to account for imperfect detection and provide estimates of precision around annual abundance estimates. Especially for species dependent on conservation management, robust monitoring is essential to evaluate the effectiveness of management. Many bird species of temperate grasslands depend on specific conservation management to maintain suitable breeding habitat. One such species is the Aquatic Warbler (Acrocephalus paludicola), which breeds in open fen mires in Central Europe. Aquatic Warbler populations have so far been assessed using a complete survey that aims to enumerate all singing males over a large area. Because this approach provides no estimate of precision and does not account for observation error, detecting moderate population changes is challenging. From 2011 to 2013 we trialled a new line transect sampling monitoring design in the Biebrza valley, Poland, to estimate abundance of singing male Aquatic Warblers. We surveyed Aquatic Warblers repeatedly along 50 randomly placed 1-km transects, and used binomial mixture models to estimate abundances per transect. The repeated line transect sampling required 150 observer days, and thus less effort than the traditional ‘full count’ approach (175 observer days). Aquatic Warbler abundance was highest at intermediate water levels, and detection probability varied between years and was influenced by vegetation height. A power analysis indicated that our line transect sampling design had a power of 68% to detect a 20% population change over 10 years, whereas raw count data had a 9% power to detect the same trend. Thus, by accounting for imperfect detection we increased the power to detect population changes. We recommend to adopt the repeated line transect sampling approach for monitoring Aquatic Warblers in Poland and in other important breeding areas to monitor changes in population size and the effects of habitat management. PMID:24713994

Osteoclastogenesis and Osteoclastic Resorption of Tricalcium Phosphate: Effect of Strontium and Magnesium Doping

PubMed Central

Roy, Mangal; Bose, Susmita

2012-01-01

Bone substitute materials are required to support the remodeling process, which consists of osteoclastic resorption and osteoblastic synthesis. Osteoclasts, the bone resorbing cells, generate from differentiation of hemopoietic mononuclear cells. In the present study we have evaluated the effects of 1.0 wt% strontium (Sr) and 1.0 wt% magnesium (Mg) doping in beta-tricalcium phosphate (β-TCP) on the differentiation of mononuclear cells into osteoclast-like cells and its resorptive activity. In vitro osteoclast-like cell formation, adhesion, and resorption were studied using osteoclast precursor RAW 264.7 cell, supplemented with receptor activator of nuclear factor κβ ligand (RANKL). Osteoclast-like cell formation was noticed on pure and Sr doped β-TCP samples at day 8 which was absent on Mg doped β-TCP samples indicating decrease in initial osteoclast differentiation due to Mg doping. After 21 days of culture, osteoclast-like cell formation was evident on all samples with osteoclastic markers such as actin ring, multiple nuclei, and presence of vitronectin receptor αvβ3 integrin. After osteoclast differentiation, all substrates showed osteoclast-like cell mediated degradation, however; significantly restricted for Mg doped β-TCP samples. Our present results indicated substrate chemistry controlled osteoclast differentiation and resorptive activity which can be used in designing TCP based resorbable bone substitutes with controlled degradation properties. PMID:22566212

Microbial Air and Surface Monitoring Results from International Space Station Samples

NASA Technical Reports Server (NTRS)

Ott, C. Mark; Bruce, Rebekah J.; Castro, Victoria A.; Novikova, Natalia D.; Pierson, D. L.

2005-01-01

Over the course of long-duration spaceflight, spacecraft develop a microbial ecology that directly interacts with the crew of the vehicle. While most microorganisms are harmless or beneficial to the inhabitants of the vehicle, the presence of medically significant organisms appearing in this semi-closed environment could adversely affect crew health and performance. The risk of exposure of the crew to medically significant organisms during a mission is estimated using information gathered during nominal and contingency environmental monitoring. Analysis of the air and surface microbiota in the habitable compartments of the International Space Station (ISS) over the last four years indicate a high presence of Staphylococcus species reflecting the human inhabitants of the vehicle. Generally, air and surface microbial concentrations are below system design specifications, suggesting a lower risk of contact infection or biodegradation. An evaluation of sample frequency indicates a decrease in the identification of new species, suggesting a lower potential for unknown microorganisms to be identified. However, the opportunistic pathogen, Staphylococcus aureus, has been identified in 3 of the last 5 air samples and 5 of the last 9 surface samples. In addition, 47% of the coagulase negative Staphylococcus species that were isolated from the crew, ISS, and its hardware were found to be methicillin resistance. In combination, these observations suggest the potential of methicillin resistant infectious agents over time.

Osteoclastogenesis and osteoclastic resorption of tricalcium phosphate: effect of strontium and magnesium doping.

PubMed

Roy, Mangal; Bose, Susmita

2012-09-01

Bone substitute materials are required to support the remodeling process, which consists of osteoclastic resorption and osteoblastic synthesis. Osteoclasts, the bone-resorbing cells, generate from differentiation of hemopoietic mononuclear cells. In the present study, we have evaluated the effects of 1.0 wt % strontium (Sr) and 1.0 wt % magnesium (Mg) doping in beta-tricalcium phosphate (β-TCP) on the differentiation of mononuclear cells into osteoclast-like cells and its resorptive activity. In vitro osteoclast-like cell formation, adhesion, and resorption were studied using osteoclast precursor RAW 264.7 cell, supplemented with receptor activator of nuclear factor κβ ligand (RANKL). Osteoclast-like cell formation was noticed on pure and Sr-doped β-TCP samples at day 8, which was absent on Mg-doped β-TCP samples indicating decrease in initial osteoclast differentiation due to Mg doping. After 21 days of culture, osteoclast-like cell formation was evident on all samples with osteoclastic markers such as actin ring, multiple nuclei, and presence of vitronectin receptor α(v)β(3) integrin. After osteoclast differentiation, all substrates showed osteoclast-like cell-mediated degradation, however, significantly restricted for Mg-doped β-TCP samples. Our present results indicated that substrate chemistry controlled osteoclast differentiation and resorptive activity, which can be used in designing TCP-based resorbable bone substitutes with controlled degradation properties. Copyright © 2012 Wiley Periodicals, Inc.