40 CFR 63.7743 - How do I demonstrate continuous compliance with the emissions limitations that apply to me?

Code of Federal Regulations, 2013 CFR

2013-07-01

... arc metal melting furnace, electric induction metal melting furnace, or scrap preheater at an existing... induction metal melting furnace or scrap preheater at a new iron and steel foundry, (i) Maintaining the... at or below 0.0004 gr/dscf. (2) For each cupola metal melting furnace at an existing iron and steel...

40 CFR 63.7743 - How do I demonstrate continuous compliance with the emissions limitations that apply to me?

Code of Federal Regulations, 2012 CFR

2012-07-01

... arc metal melting furnace, electric induction metal melting furnace, or scrap preheater at an existing... induction metal melting furnace or scrap preheater at a new iron and steel foundry, (i) Maintaining the... at or below 0.0004 gr/dscf. (2) For each cupola metal melting furnace at an existing iron and steel...

40 CFR 63.7743 - How do I demonstrate continuous compliance with the emissions limitations that apply to me?

Code of Federal Regulations, 2014 CFR

2014-07-01

... arc metal melting furnace, electric induction metal melting furnace, or scrap preheater at an existing... induction metal melting furnace or scrap preheater at a new iron and steel foundry, (i) Maintaining the... at or below 0.0004 gr/dscf. (2) For each cupola metal melting furnace at an existing iron and steel...

40 CFR 63.7743 - How do I demonstrate continuous compliance with the emissions limitations that apply to me?

Code of Federal Regulations, 2011 CFR

2011-07-01

... arc metal melting furnace, electric induction metal melting furnace, or scrap preheater at an existing... induction metal melting furnace or scrap preheater at a new iron and steel foundry, (i) Maintaining the... at or below 0.0004 gr/dscf. (2) For each cupola metal melting furnace at an existing iron and steel...

[A DNA study of rat liver oligonucleosomes enriched by transcriptionally active genes during induction due to the administration of an amino acid mixture].

PubMed

Vardevanian, P O; Davtian, A M; Tiratsuian, S G; Vardevanian, A O

1990-01-01

A highly active fraction of rat liver oligonucleosome DNA has been isolated and studied by means of thermal denaturation after induction by amino acid mixture or hydrocortisone. A considerable redistribution of DNA content has been shown in sucrose gradient fractions during these forms of induction. The changes are revealed in melting temperature, differential melting profile of DNA, isolated from actively transcribed chromatine fractions. Analysis of melting profiles shows changes of GC content of oligonucleosome DNA, suggesting that there are differences in activation during two studied forms of induction.

Refining a complex nickel alloy to remove a sulfur impurity during vacuum induction melting: Part II

NASA Astrophysics Data System (ADS)

Sidorov, V. V.; Min, P. G.

2014-12-01

The results of studying the refining of complexly alloyed nickel melts from sulfur during melting in a vacuum induction furnace or with the use of an oxide calcium crucible, metallic calcium added to a melt, or rare-earth metals additions (which form thermodynamically stable refractory compounds with sulfur and, thus, eliminate the harmful effect of sulfur in the alloys) are reported.

Power supplies for dual-frequency induction melting of metals

NASA Astrophysics Data System (ADS)

Lusgin, V. I.; Koptyakov, A. S.; Petrov, A. U.; Zinovev, K. A.; Kamaev, D. A.

2018-02-01

The article discusses the benefits of multi frequency induction melting in the production of synthetic cast iron, structural (electric circuit) principles of dual frequency Power supplies of melting systems. The ways of electric power regulation of low frequency and high frequency components of the current in the inductor sections of furnace are demonstrated, namely power rescheduling at the metal melting stage, alloying stage and decarburizing of synthetic cast iron.

Modification of gray iron produced by induction melting with barium strontium

NASA Astrophysics Data System (ADS)

Modzelevskaya, G.; Feoktistov, A. V.; Selyanin, I. F.; Kutsenko, A. I.; Kutsenko, A. A.

2016-09-01

The article provides analysis of results of gray iron experimental melts in induction furnace and the following melt modification with barium-strontium carbonate (BSC-2). It is shown that modification positively affects mechanical and casting properties and as-cast iron structure. It was established that BSC-2 granulated immediately prior to use has greater impact on melt than BSC-2 of the same faction, supplied by the manufacturer.

40 CFR 63.7690 - What emissions limitations must I meet?

Code of Federal Regulations, 2013 CFR

2013-07-01

... metal melting furnace, electric induction metal melting furnace, or scrap preheater at an existing iron... electric induction metal melting furnace or scrap preheater at a new iron and steel foundry, you must not... furnace at an existing iron and steel foundry, you must not discharge emissions through a conveyance to...

40 CFR 63.7690 - What emissions limitations must I meet?

Code of Federal Regulations, 2011 CFR

2011-07-01

... metal melting furnace, electric induction metal melting furnace, or scrap preheater at an existing iron... electric induction metal melting furnace or scrap preheater at a new iron and steel foundry, you must not... furnace at an existing iron and steel foundry, you must not discharge emissions through a conveyance to...

40 CFR 63.7690 - What emissions limitations must I meet?

Code of Federal Regulations, 2012 CFR

2012-07-01

... metal melting furnace, electric induction metal melting furnace, or scrap preheater at an existing iron... electric induction metal melting furnace or scrap preheater at a new iron and steel foundry, you must not... furnace at an existing iron and steel foundry, you must not discharge emissions through a conveyance to...

40 CFR 63.7690 - What emissions limitations must I meet?

Code of Federal Regulations, 2014 CFR

2014-07-01

... metal melting furnace, electric induction metal melting furnace, or scrap preheater at an existing iron... electric induction metal melting furnace or scrap preheater at a new iron and steel foundry, you must not... furnace at an existing iron and steel foundry, you must not discharge emissions through a conveyance to...

An AUC-based permutation variable importance measure for random forests

PubMed Central

2013-01-01

Background The random forest (RF) method is a commonly used tool for classification with high dimensional data as well as for ranking candidate predictors based on the so-called random forest variable importance measures (VIMs). However the classification performance of RF is known to be suboptimal in case of strongly unbalanced data, i.e. data where response class sizes differ considerably. Suggestions were made to obtain better classification performance based either on sampling procedures or on cost sensitivity analyses. However to our knowledge the performance of the VIMs has not yet been examined in the case of unbalanced response classes. In this paper we explore the performance of the permutation VIM for unbalanced data settings and introduce an alternative permutation VIM based on the area under the curve (AUC) that is expected to be more robust towards class imbalance. Results We investigated the performance of the standard permutation VIM and of our novel AUC-based permutation VIM for different class imbalance levels using simulated data and real data. The results suggest that the new AUC-based permutation VIM outperforms the standard permutation VIM for unbalanced data settings while both permutation VIMs have equal performance for balanced data settings. Conclusions The standard permutation VIM loses its ability to discriminate between associated predictors and predictors not associated with the response for increasing class imbalance. It is outperformed by our new AUC-based permutation VIM for unbalanced data settings, while the performance of both VIMs is very similar in the case of balanced classes. The new AUC-based VIM is implemented in the R package party for the unbiased RF variant based on conditional inference trees. The codes implementing our study are available from the companion website: http://www.ibe.med.uni-muenchen.de/organisation/mitarbeiter/070_drittmittel/janitza/index.html. PMID:23560875

An AUC-based permutation variable importance measure for random forests.

PubMed

Janitza, Silke; Strobl, Carolin; Boulesteix, Anne-Laure

2013-04-05

The random forest (RF) method is a commonly used tool for classification with high dimensional data as well as for ranking candidate predictors based on the so-called random forest variable importance measures (VIMs). However the classification performance of RF is known to be suboptimal in case of strongly unbalanced data, i.e. data where response class sizes differ considerably. Suggestions were made to obtain better classification performance based either on sampling procedures or on cost sensitivity analyses. However to our knowledge the performance of the VIMs has not yet been examined in the case of unbalanced response classes. In this paper we explore the performance of the permutation VIM for unbalanced data settings and introduce an alternative permutation VIM based on the area under the curve (AUC) that is expected to be more robust towards class imbalance. We investigated the performance of the standard permutation VIM and of our novel AUC-based permutation VIM for different class imbalance levels using simulated data and real data. The results suggest that the new AUC-based permutation VIM outperforms the standard permutation VIM for unbalanced data settings while both permutation VIMs have equal performance for balanced data settings. The standard permutation VIM loses its ability to discriminate between associated predictors and predictors not associated with the response for increasing class imbalance. It is outperformed by our new AUC-based permutation VIM for unbalanced data settings, while the performance of both VIMs is very similar in the case of balanced classes. The new AUC-based VIM is implemented in the R package party for the unbiased RF variant based on conditional inference trees. The codes implementing our study are available from the companion website: http://www.ibe.med.uni-muenchen.de/organisation/mitarbeiter/070_drittmittel/janitza/index.html.

Normal tubular regeneration and differentiation of the post-ischemic kidney in mice lacking vimentin.

PubMed Central

Terzi, F.; Maunoury, R.; Colucci-Guyon, E.; Babinet, C.; Federici, P.; Briand, P.; Friedlander, G.

1997-01-01

Proliferation and dedifferentiation of tubular cells are the hallmark of early regeneration after renal ischemic injury. Vimentin, a class III intermediate filament expressed only in mesenchymal cells of mature mammals, was shown to be transiently expressed in post-ischemic renal tubular epithelial cells. Vimentin re-expression was interpreted as a marker of cellular dedifferentiation, but its role in tubular regeneration after renal ischemia has also been hypothesized. This role was evaluated in mice bearing a null mutation of the vimentin gene. Expression of vimentin, proliferating cell nuclear antigen (a marker of cellular proliferation), and villin (a marker of differentiated brush-border membranes) was studied in wild-type (Vim+/+), heterozygous (Vim+/-), and homozygous (Vim-/-) mice subjected to transient ischemia of the left kidney. As expected, vimentin was detected by immunohistochemistry at the basal pole of proximal tubular cells from post-ischemic kidney in Vim+/+ and Vim+/- mice from day 2 to day 28. The expression of the reporter gene beta-galactosidase in Vim+/- and Vim-/- mice confirmed the tubular origin of vimentin. No compensatory expression of keratin could be demonstrated in Vim-/- mice. The intensity of proliferating cell nuclear antigen labeling and the pattern of villin expression were comparable in Vim-/-, Vim+/- and Vim+/+ mice at any time of the study. After 60 days, the structure of post-ischemic kidneys in Vim-/- mice was indistinguishable from that of normal non-operated kidneys in Vim+/+ mice. In conclusion, 1) the pattern of post-ischemic proximal tubular cell proliferation, differentiation, and tubular organization was not impaired in mice lacking vimentin and 2) these results suggest that the transient tubular expression of vimentin is not instrumental in tubular regeneration after renal ischemic injury. Images Figure 1 Figure 2 Figure 3 Figure 5 Figure 6 Figure 7 PMID:9094992

INDUCTION HEATING PROCESS FOR MELTING TITANIUM (COLD-WALL CRUCIBLES, SEGMENTED AND NON-SEGMENTED).

DTIC Science & Technology

system during melting tests. Three types of cold-wall crucibles were investigated. The first was a four-segment copper crucible , the second a non...segmented silicon bronze crucible, and the third a two-segment copper crucible coated with BeO. Attempts to melt titanium in an induction field in a cold

40 CFR 63.7734 - How do I demonstrate initial compliance with the emissions limitations that apply to me?

Code of Federal Regulations, 2013 CFR

2013-07-01

... used to demonstrate compliance. (1) For each electric arc metal melting furnace, electric induction metal melting furnace, or scrap preheater at an existing iron and steel foundry, (i) The average PM... not exceed 0.0002 gr/dscf. (4) For each electric induction metal melting furnace or scrap preheater at...

40 CFR 63.7734 - How do I demonstrate initial compliance with the emissions limitations that apply to me?

Code of Federal Regulations, 2010 CFR

2010-07-01

... used to demonstrate compliance. (1) For each electric arc metal melting furnace, electric induction metal melting furnace, or scrap preheater at an existing iron and steel foundry, (i) The average PM... not exceed 0.0002 gr/dscf. (4) For each electric induction metal melting furnace or scrap preheater at...

40 CFR 63.7734 - How do I demonstrate initial compliance with the emissions limitations that apply to me?

Code of Federal Regulations, 2012 CFR

2012-07-01

... used to demonstrate compliance. (1) For each electric arc metal melting furnace, electric induction metal melting furnace, or scrap preheater at an existing iron and steel foundry, (i) The average PM... not exceed 0.0002 gr/dscf. (4) For each electric induction metal melting furnace or scrap preheater at...

40 CFR 63.7734 - How do I demonstrate initial compliance with the emissions limitations that apply to me?

Code of Federal Regulations, 2014 CFR

2014-07-01

... used to demonstrate compliance. (1) For each electric arc metal melting furnace, electric induction metal melting furnace, or scrap preheater at an existing iron and steel foundry, (i) The average PM... not exceed 0.0002 gr/dscf. (4) For each electric induction metal melting furnace or scrap preheater at...

40 CFR 63.7734 - How do I demonstrate initial compliance with the emissions limitations that apply to me?

Code of Federal Regulations, 2011 CFR

2011-07-01

... used to demonstrate compliance. (1) For each electric arc metal melting furnace, electric induction metal melting furnace, or scrap preheater at an existing iron and steel foundry, (i) The average PM... not exceed 0.0002 gr/dscf. (4) For each electric induction metal melting furnace or scrap preheater at...

Influence of sexual stimulation on sperm parameters in semen samples collected via masturbation from normozoospermic men or cryptozoospermic men participating in an assisted reproduction programme.

PubMed

Yamamoto, Y; Sofikitis, N; Mio, Y; Miyagawa, I

2000-05-01

To evaluate the influence of sexual stimulation via sexually stimulating videotaped visual images (VIM) on sperm function, two semen samples were collected from each of 19 normozoospermic men via masturbation with VIM. Two additional samples were collected from each man via masturbation without VIM. The volume of seminal plasma, total sperm count, sperm motility, percentage of morphologically normal spermatozoa, outcome of hypo-osmotic swelling test and zona-free hamster oocyte sperm penetration assay, and markers of the secretory function of prostate were significantly larger in semen samples collected via masturbation with VIM than masturbation without VIM. The improved sperm parameters in the samples collected via masturbation with VIM may reflect an enhanced prostatic secretory function and increased loading of the vas deferens at that time. In a similar protocol, two semen samples were collected via masturbation with VIM from each of 22 non-obstructed azoospermic men. Semen samples from these men had been occasionally positive in the past for a very small number of spermatozoa (cryptozoospermic men). Two additional samples were collected from each cryptozoospermic man via masturbation without VIM. The volume of seminal plasma, total sperm count, sperm motility, and a marker of the secretory function of prostate were significantly larger in semen samples collected via masturbation with VIM. Fourteen out of the 22 men were negative for spermatozoa in both samples collected via masturbation without VIM. These men demonstrated spermatozoa in both samples collected via masturbation with VIM. Six men with immotile spermatozoa in both samples collected via masturbation without VIM exposed motile spermatozoa in both samples collected via masturbation with VIM. High sexual stimulation during masturbation with VIM results in recovery of spermatozoa of greater fertilizing potential both in normozoospermic and cryptozoospermic men. The appearance of spermatozoa after masturbation with VIM in the vast majority of cryptozoospermic men is of clinical significance in programmes applying intracytoplasmic sperm injections for the management of severe male infertility and obviates the need for testicular biopsy.

Caldron For High-Temperature Alloys

NASA Technical Reports Server (NTRS)

Geringer, Henry J.

1989-01-01

Induction-heated caldron melts high-temperature alloys. Prevents sort of contamination of melts occurring during arc melting in ceramic crucibles. Liquefies 200 grams of solid metal components of alloy like niobium aluminum and makes alloy homogeneous in less than 3 minutes. Plugged sleeve constitutes main body of caldron. Coolant flows through sleeve to prevent it from melting. Mandrel-wound induction coils adjusted to tune source of power. Also serves as mold for casting alloys into such shapes as bars.

Investigation of visually induced motion sickness in dynamic 3D contents based on subjective judgment, heart rate variability, and depth gaze behavior.

PubMed

Wibirama, Sunu; Hamamoto, Kazuhiko

2014-01-01

Visually induced motion sickness (VIMS) is an important safety issue in stereoscopic 3D technology. Accompanying subjective judgment of VIMS with objective measurement is useful to identify not only biomedical effects of dynamic 3D contents, but also provoking scenes that induce VIMS, duration of VIMS, and user behavior during VIMS. Heart rate variability and depth gaze behavior are appropriate physiological indicators for such objective observation. However, there is no information about relationship between subjective judgment of VIMS, heart rate variability, and depth gaze behavior. In this paper, we present a novel investigation of VIMS based on simulator sickness questionnaire (SSQ), electrocardiography (ECG), and 3D gaze tracking. Statistical analysis on SSQ data shows that nausea and disorientation symptoms increase as amount of dynamic motions increases (nausea: p<;0.005; disorientation: p<;0.05). To reduce VIMS, SSQ and ECG data suggest that user should perform voluntary gaze fixation at one point when experiencing vertical motion (up or down) and horizontal motion (turn left and right) in dynamic 3D contents. Observation of 3D gaze tracking data reveals that users who experienced VIMS tended to have unstable depth gaze than ones who did not experience VIMS.

Thermal sprayed composite melt containment tubular component and method of making same

DOEpatents

Besser, Matthew F.; Terpstra, Robert L.; Sordelet, Daniel J.; Anderson, Iver E.

2002-03-19

A tubular thermal sprayed melt containment component for transient containment of molten metal or alloy wherein the tubular member includes a thermal sprayed inner melt-contacting layer for contacting molten metal or alloy to be processed, a thermal sprayed heat-generating layer deposited on the inner layer, and an optional thermal sprayed outer thermal insulating layer. The thermal sprayed heat-generating layer is inductively heated as a susceptor of an induction field or electrical resistively heated by passing electrical current therethrough. The tubular thermal sprayed melt containment component can comprise an elongated melt pour tube of a gas atomization apparatus where the melt pour tube supplies molten material from a crucible to an underlying melt atomization nozzle.

The General Definition of the p97/Valosin-containing Protein (VCP)-interacting Motif (VIM) Delineates a New Family of p97 Cofactors*

PubMed Central

Stapf, Christopher; Cartwright, Edward; Bycroft, Mark; Hofmann, Kay; Buchberger, Alexander

2011-01-01

Cellular functions of the essential, ubiquitin-selective AAA ATPase p97/valosin-containing protein (VCP) are controlled by regulatory cofactors determining substrate specificity and fate. Most cofactors bind p97 through a ubiquitin regulatory X (UBX) or UBX-like domain or linear sequence motifs, including the hitherto ill defined p97/VCP-interacting motif (VIM). Here, we present the new, minimal consensus sequence RX5AAX2R as a general definition of the VIM that unites a novel family of known and putative p97 cofactors, among them UBXD1 and ZNF744/ANKZF1. We demonstrate that this minimal VIM consensus sequence is necessary and sufficient for p97 binding. Using NMR chemical shift mapping, we identified several residues of the p97 N-terminal domain (N domain) that are critical for VIM binding. Importantly, we show that cellular stress resistance conferred by the yeast VIM-containing cofactor Vms1 depends on the physical interaction between its VIM and the critical N domain residues of the yeast p97 homolog, Cdc48. Thus, the VIM-N domain interaction characterized in this study is required for the physiological function of Vms1 and most likely other members of the newly defined VIM family of cofactors. PMID:21896481

The behaviour of random forest permutation-based variable importance measures under predictor correlation.

PubMed

Nicodemus, Kristin K; Malley, James D; Strobl, Carolin; Ziegler, Andreas

2010-02-27

Random forests (RF) have been increasingly used in applications such as genome-wide association and microarray studies where predictor correlation is frequently observed. Recent works on permutation-based variable importance measures (VIMs) used in RF have come to apparently contradictory conclusions. We present an extended simulation study to synthesize results. In the case when both predictor correlation was present and predictors were associated with the outcome (HA), the unconditional RF VIM attributed a higher share of importance to correlated predictors, while under the null hypothesis that no predictors are associated with the outcome (H0) the unconditional RF VIM was unbiased. Conditional VIMs showed a decrease in VIM values for correlated predictors versus the unconditional VIMs under HA and was unbiased under H0. Scaled VIMs were clearly biased under HA and H0. Unconditional unscaled VIMs are a computationally tractable choice for large datasets and are unbiased under the null hypothesis. Whether the observed increased VIMs for correlated predictors may be considered a "bias" - because they do not directly reflect the coefficients in the generating model - or if it is a beneficial attribute of these VIMs is dependent on the application. For example, in genetic association studies, where correlation between markers may help to localize the functionally relevant variant, the increased importance of correlated predictors may be an advantage. On the other hand, we show examples where this increased importance may result in spurious signals.

The Use of Induction Melting for the Treatment of Metal Radioactive Waste - 13088

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zherebtsov, Alexander; Pastushkov, Vladimir; Poluektov, Pavel

2013-07-01

The aim of the work is to assess the efficacy of induction melting metal for recycling radioactive waste in order to reduce the volume of solid radioactive waste to be disposed of, and utilization of the metal. (authors)

Multipurpose Vacuum Induction Processing System

NASA Astrophysics Data System (ADS)

Govindaraju, M.; Kulkarni, Deepak; Balasubramanian, K.

2012-11-01

Multipurpose vacuum processing systems are cost effective; occupy less space, multiple functional under one roof and user friendly. A multipurpose vacuum induction system was designed, fabricated and installed in a record time of 6 months time at NFTDC Hyderabad. It was designed to function as a) vacuum induction melting/refining of oxygen free electronic copper/pure metals, b) vacuum induction melting furnace for ferrous materials c) vacuum induction melting for non ferrous materials d) large vacuum heat treatment chamber by resistance heating (by detachable coil and hot zone) e) bottom discharge vacuum induction melting system for non ferrous materials f) Induction heat treatment system and g) directional solidification /investment casting. It contains provision for future capacity addition. The attachments require to manufacture multiple shaped castings and continuous rod casting can be added whenever need arises. Present capacity is decided on the requirement for 10years of development path; presently it has 1.2 ton liquid copper handling capacity. It is equipped with provision for capacity addition up to 2 ton liquid copper handling capacity in future. Provision is made to carry out the capacity addition in easy steps quickly. For easy operational maintenance and troubleshooting, design was made in easily detachable sections. High vacuum system is also is detachable, independent and easily movable which is first of its kind in the country. Detailed design parameters, advantages and development history are presented in this paper.

Dephosphorization of complexly alloyed nickel melts under vacuum induction melting conditions: I. Thermodynamics of dephosphorization

NASA Astrophysics Data System (ADS)

Burtsev, V. T.; Anuchkin, S. N.; Sidorov, V. V.; Rigin, V. E.

2013-01-01

A thermodynamic computer simulation of the oxidation potential of a gas-melt-ceramic (80 wt% MgO, 20 wt % Al2O3) system under vacuum induction furnace conditions is used to find that the major contribution to this potential at temperatures ranging from 1673 to 2273 K is made by a nickel melt with additives of nickel protoxide. This provides the possibility of oxidative dephosphorization of the metallic melt. The computation of the saturated vapor pressure of phosphorus compounds with the IIA group elements shows that the data obtained for magnesium, calcium, and barium metaphosphates and europium orthophosphate at 1873 K indicate the principal possibility of melt dephosphorization by the evaporation of these compounds under oxidative conditions.

Cassini VIMS observations of the Galilean satellites including the VIMS calibration procedure

USGS Publications Warehouse

McCord, T.B.; Coradini, A.; Hibbitts, C.A.; Capaccioni, F.; Hansen, G.B.; Filacchione, G.; Clark, R.N.; Cerroni, P.; Brown, R.H.; Baines, K.H.; Bellucci, G.; Bibring, J.-P.; Buratti, B.J.; Bussoletti, E.; Combes, M.; Cruikshank, D.P.; Drossart, P.; Formisano, V.; Jaumann, R.; Langevin, Y.; Matson, D.L.; Nelson, R.M.; Nicholson, P.D.; Sicardy, B.; Sotin, Christophe

2004-01-01

The Visual and Infrared Mapping Spectrometer (VIMS) observed the Galilean satellites during the Cassini spacecraft's 2000/2001 flyby of Jupiter, providing compositional and thermal information about their surfaces. The Cassini spacecraft approached the jovian system no closer than about 126 Jupiter radii, about 9 million kilometers, at a phase angle of < 90 ??, resulting in only sub-pixel observations by VIMS of the Galilean satellites. Nevertheless, most of the spectral features discovered by the Near Infrared Mapping Spectrometer (NIMS) aboard the Galileo spacecraft during more than four years of observations have been identified in the VIMS data analyzed so far, including a possible 13C absorption. In addition, VIMS made observations in the visible part of the spectrum and at several new phase angles for all the Galilean satellites and the calculated phase functions are presented. In the process of analyzing these data, the VIMS radiometric and spectral calibrations were better determined in preparation for entry into the Saturn system. Treatment of these data is presented as an example of the VIMS data reduction, calibration and analysis process and a detailed explanation is given of the calibration process applied to the Jupiter data. ?? 2004 Elsevier Inc. All rights reserved.

Studies on the hot corrosion of a nickel-base superalloy, Udimet 700

NASA Technical Reports Server (NTRS)

Misra, A. K.

1984-01-01

The hot corrosion of a nickel-base superalloy, Udimet 700, was studied in the temperature range of 884 to 965 C and with different amounts of Na2SO4. Two different modes of degradation were identified: (1) formation of Na2MoO4 - MoO3 melt and fluxing by this melt, and (2) formation of large interconnected sulfides. The dissolution of Cr2O3, TiO2 in the Na2SO4 melt does not play a significant role in the overall corrosion process. The conditions for the formation of massive interconnected sulfides were identified and a mechanism of degradation due to sulfide formation is described. The formation of Ns2MoO4 - MoO3 melt requires an induction period and various physiochemical processes during the induction period were identified. The factors affecting the length of the induction period were also examined. The melt penetration through the oxide appears to be the prime mode of degradation whether the degradation is due to the formation of sulfides or the formation of the Na2MoO4 - MoO3 melt.

Ceftazidime Is the Key Diversification and Selection Driver of VIM-Type Carbapenemases.

PubMed

Martínez-García, Laura; González-Alba, José M; Baquero, Fernando; Cantón, Rafael; Galán, Juan Carlos

2018-05-08

In recent decades, carbapenems have been considered the last line of antibiotic therapy for Gram-negative bacterial infections. Unfortunately, strains carrying a high diversity of β-lactamases able to hydrolyze carbapenems have emerged in the clinical setting. Among them, VIM β-lactamases have diversified in a bloom of variants. The evolutionary reconstructions performed in this work revealed that, at the end of the 1980s, two independent events involving diversification from VIM-2 and VIM-4 produced at least 25 VIM variants. Later, a third event involving diversification from VIM-1 occurred in the mid-1990s. In a second approach to understanding the emergence of VIM carbapenemases, 44 mutants derived from VIM-2 and VIM-4 were obtained by site-directed mutagenesis based on those positions predicted to be under positive selection. These variants were expressed in an isogenic context. The more-evolved variants yielded increased levels of hydrolytic efficiency toward ceftazidime to a higher degree than toward carbapenems. In fact, an antagonist effect was frequently observed. These results led us to develop an experimental-evolution step. When Escherichia coli strains carrying VIM-2 or VIM-4 were submitted to serial passages at increasing concentrations of carbapenems or ceftazidime, more-efficient new variants (such as VIM-11 and VIM-1, with N165S [bearing a change from N to S at position 165] and R228S mutations, respectively) were only obtained when ceftazidime was present. Therefore, the observed effect of ceftazidime in the diversification and selection of VIM variants might help to explain the recent bloom of carbapenemase diversity, and it also represents another example of the potential universal effect exerted by ceftazidime in the selection of more-efficient β-lactamase variants, as in TEM, CTX-M, or KPC enzymes. IMPORTANCE One of the objectives recently proposed by the World Health Organization (WHO) Assembly in the global plan on antimicrobial resistance was to improve the understanding and knowledge of antimicrobial resistance. In the present work, we paid attention to the drivers of diversification and selection of new carbapenemases in Gram-negative bacteria, which occupy one of the most critical places in the WHO priority list of antibiotic-resistant microorganisms. Based on evolutionary-reconstruction, site-directed-mutagenesis, and experimental-evolution approaches, we proposed a critical role of ceftazidime exposure in the selection of VIM carbapenemase variants. This surprising finding is also applicable to other β-lactamases, indicating that ceftazidime, and not other antibiotics, might have a universal effect in the diversification of β-lactamases. Our results might help to define future strategies to reconsider the extended use of ceftazidime. Copyright © 2018 Martínez-García et al.

Radioactive scrap metal decontamination technology assessment report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Buckentin, J.M.; Damkroger, B.K.; Schlienger, M.E.

1996-04-01

Within the DOE complex there exists a tremendous quantity of radioactive scrap metal. As an example, it is estimated that within the gaseous diffusion plants there exists in excess of 700,000 tons of contaminated stainless steel. At present, valuable material is being disposed of when it could be converted into a high quality product. Liquid metal processing represents a true recycling opportunity for this material. By applying the primary production processes towards the material`s decontamination and re-use, the value of the strategic resource is maintained while drastically reducing the volume of material in need of burial. Potential processes for themore » liquid metal decontamination of radioactively contaminated metal are discussed and contrasted. Opportunities and technology development issues are identified and discussed. The processes compared are: surface decontamination; size reduction, packaging and burial; melting technologies; electric arc melting; plasma arc centrifugal treatment; air induction melting; vacuum induction melting; and vacuum induction melting and electroslag remelting.« less

Induction furnace testing of the durability of prototype crucibles in a molten metal environment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jablonski, Paul D.

2005-09-01

Engineered ceramic crucibles are commonly used to contain molten metal. Besides high temperature stability, other desired crucible characteristics include thermal shock resistance, minimal reaction with the molten metal and resistance to attack from the base metal oxide formed during melting. When used in an induction furnace, they can be employed as a “semi-permanent” crucible incorporating a dry ram backup and a ceramic cap. This report covers several 250-lb single melt crucible tests in an air melt induction furnace. These tests consisted of melting a charge of 17-4PH stainless steel, holding the charge molten for two hours before pouring off themore » heat and then subsequently sectioning the crucible to review the extent of erosion, penetration and other physical characteristics. Selected temperature readings were made throughout each melt. Chemistry samples were also taken from each heat periodically throughout the hold. The manganese level was observed to affect the rate of chromium loss in a non-linear fashion.« less

Refining a complex nickel alloy to remove a sulfur impurity during vacuum induction melting: Part I

NASA Astrophysics Data System (ADS)

Sidorov, V. V.; Min, P. G.

2014-12-01

The peculiarities of refining a complexly alloyed nickel alloy from a sulfur impurity during melting of the alloy in a vacuum induction furnace are considered. The application of CaO-based slags is shown to allow the sulfur content in a metal to be decreased; however, in this case, the reduction of calcium, its transfer into the melt, and the degradation of the properties of the alloy take place.

Hydrogenation and interesterification effects on the oxidative stability and melting point of soybean oil.

PubMed

Daniels, Roger L; Kim, Hyun Jung; Min, David B

2006-08-09

Soybean oil with an iodine value of 136 was hydrogenated to have iodine values of 126 and 117. The soybean oils with iodine values of 136, 126, and 117 were randomly interesterified using sodium methoxide. The oxidative stabilities of the hydrogenated and/or interesterified soybean oils were evaluated by measuring the headspace oxygen content by gas chromatography, and the induction time was measured using Rancimat. The melting points of the oils were evaluated by differential scanning calorimetry. Duncan's multiple range test of the headspace oxygen and induction time showed that hydrogenation increased the headspace oxygen content and induction time at alpha = 0.05. Interesterification decreased the headspace oxygen and the induction time for the soybean oils with iodine values of 136, 126, and 117 at alpha = 0.05. Hydrogenation increased the melting points as the iodine value decreased from 136 and 126 to 117 at alpha = 0.05. The random interesterification increased the melting points of soybean oils with iodine values of 136, 126, and 117 at alpha = 0.05. The combined effects of hydrogenation and interesterification increased the oxidative stability of soybean oil at alpha = 0.05 and the melting point at alpha = 0.01. The optimum combination of hydrogenation and random interesterification can improve the oxidative stability and increase the melting point to expand the application of soybean oil in foods.

Vacuum-Induction, Vacuum-Arc, and Air-Induction Melting of a Complex Heat-Resistant Alloy

NASA Technical Reports Server (NTRS)

Decker, R. F.; Rowe, John P.; Freeman, J. W.

1959-01-01

The relative hot-workability and creep-rupture properties at 1600 F of a complex 55Ni-20Cr-15Co-4Mo-3Ti-3Al alloy were evaluated for vacuum-induction, vacuum-arc, and air-induction melting. A limited study of the role of oxygen and nitrogen and the structural effects in the alloy associated with the melting process was carried out. The results showed that the level of boron and/or zirconium was far more influential on properties than the melting method. Vacuum melting did reduce corner cracking and improve surface during hot-rolling. It also resulted in more uniform properties within heats. The creep-rupture properties were slightly superior in vacuum heats at low boron plus zirconium or in heats with zirconium. There was little advantage at high boron levels and air heats were superior at high levels of boron plus zirconium. Vacuum heats also had fewer oxide and carbonitride inclusions although this was a function of the opportunity for separation of the inclusions from high oxygen plus nitrogen heats. The removal of phosphorous by vacuum melting was not found to be related to properties. Oxygen plus nitrogen appeared to increase ductility in creep-rupture tests suggesting that vacuum melting removes unidentified elements detrimental to ductility. Oxides and carbonitrides in themselves did not initiate microcracks. Carbonitrides in the grain boundaries of air heats did initiate microcracks. The role of microcracking from this source and as a function of oxygen and nitrogen content was not clear. Oxygen and nitrogen did intensify corner cracking during hot-rolling but were not responsible for poor surface which resulted from rolling heats melted in air.

Study of the production of unique new glasses

NASA Technical Reports Server (NTRS)

Happe, R. A.

1972-01-01

A number of high new oxide glasses have been prepared by a laser-spin melting technique where droplets are ejected from a molten mass. Techniques have been developed for measuring the optical properties of most of the new glasses so produced. A preliminary study of processing equipment for producing new glasses in a zero gravity environment onboard manned space laboratory is reported. Induction and laser melting emerge as preferred techniques for melting spheroids of new glass compositions in space. Sample calculations for power required to induction melt new glass compositions are presented. Cooling rate calculations show that radiation cooling of the high melting materials results in very short cooling times for 1/2 inch diameters to temperatures where the spheroids can be handled.

Experience of ALCOA-KOFEM with MHD induction stirrer

DOE Office of Scientific and Technical Information (OSTI.GOV)

Petho, S.

1996-10-01

Every ingot cast shop makes an effort to reduce the costs and to increase the productivity. The MHD stirrer is an adequate tool to achieve a more economical production. The electromagnetic stirrer accelerates the melting rate of the charge, reduces the metal loss and improves the consistency of ingot quality. The Ingot Business Unit of ALCOA-KOFEM operates seven melting furnaces. Each furnace is equipped with a POTOK type MHD induction stirrer in order to achieve a more profitable melting operation. Magnetohydrodynamic stirrers were installed between 1988 and 1990 on melting furnaces ranging in capacity from 25 to 60 tons ofmore » molten metal.« less

Genomic epidemiology of global VIM-producing Enterobacteriaceae.

PubMed

Matsumura, Yasufumi; Peirano, Gisele; Devinney, Rebekah; Bradford, Patricia A; Motyl, Mary R; Adams, Mark D; Chen, Liang; Kreiswirth, Barry; Pitout, Johann D D

2017-08-01

International data on the molecular epidemiology of Enterobacteriaceae with VIM carbapenemases are limited. We performed short read (Illumina) WGS on a global collection of 89 VIM-producing clinical Enterobacteriaceae (2008-14). VIM-producing (11 varieties within 21 different integrons) isolates were mostly obtained from Europe. Certain integrons with bla VIM were specific to a country in different species and clonal complexes (CCs) (In 87 , In 624 , In 916 and In 1323 ), while others had spread globally among various Enterobacteriaceae species (In 110 and In 1209 ). Klebsiella pneumoniae was the most common species ( n  = 45); CC147 from Greece was the most prevalent clone and contained In 590 -like integrons with four different bla VIM s. Enterobacter cloacae complex was the second most common species and mainly consisted of Enterobacter hormaechei ( Enterobacter xiangfangensis , subsp. steigerwaltii and Hoffmann cluster III). CC200 (from Croatia and Turkey), CC114 (Croatia, Greece, Italy and the USA) and CC78 (from Greece, Italy and Spain) containing bla VIM-1 were the most common clones among the E. cloacae complex. This study highlights the importance of surveillance programmes using the latest molecular techniques in providing insight into the characteristics and global distribution of Enterobacteriaceae with bla VIM s. © The Author 2017. Published by Oxford University Press on behalf of the British Society for Antimicrobial Chemotherapy. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Multiyear, Multinational Survey of the Incidence and Global Distribution of Metallo-β-Lactamase-Producing Enterobacteriaceae and Pseudomonas aeruginosa.

PubMed

Kazmierczak, Krystyna M; Rabine, Sharon; Hackel, Meredith; McLaughlin, Robert E; Biedenbach, Douglas J; Bouchillon, Samuel K; Sahm, Daniel F; Bradford, Patricia A

2016-02-01

Metallo-β-lactamases (MBLs) hydrolyze all classes of β-lactams except monobactams and are not inhibited by classic serine β-lactamase inhibitors. Gram-negative pathogens isolated from patient infections were collected from 202 medical centers in 40 countries as part of a global surveillance study from 2012 to 2014. Carbapenem-nonsusceptible Enterobacteriaceae and Pseudomonas aeruginosa were characterized for bla genes encoding VIM, IMP, NDM, SPM, and GIM variants using PCR and sequencing. A total of 471 MBL-positive isolates included the following species (numbers of isolates are in parentheses): P. aeruginosa (308), Klebsiella spp. (85), Enterobacter spp. (39), Proteeae (16), Citrobacter freundii (12), Escherichia coli (6), and Serratia marcescens (5) and were submitted by sites from 34 countries. Of these, 69.6% were collected in 9 countries (numbers of isolates are in parentheses): Russia (72), Greece (61), Philippines (54), Venezuela (29), and Kuwait, Nigeria, Romania, South Africa, and Thailand (20 to 25 isolates each). Thirty-two different MBL variants were detected (14 VIM, 14 IMP, and 4 NDM enzymes). Seven novel MBL variants were encountered in the study, each differing from a previously reported variant by one amino acid substitution: VIM-42 (VIM-1 [V223I]), VIM-43 (VIM-4 [A24V]), VIM-44 (VIM-2 [K257N]), VIM-45 (VIM-2 [T35I]), IMP-48 (IMP-14 [I69T]), IMP-49 (IMP-18 [V49F]), and NDM-16 (NDM-1 [R264H]). The in vitro activities of all tested antibiotics against MBL-positive Enterobacteriaceae were significantly reduced with the exception of that of aztreonam-avibactam (MIC90, 0.5 to 1 μg/ml), whereas colistin was the most effective agent against MBL-positive P. aeruginosa isolates (>97% susceptible). Although the global percentage of isolates encoding MBLs remains relatively low, their detection in 12 species, 34 countries, and all regions participating in this surveillance study is concerning. Copyright © 2016, American Society for Microbiology. All Rights Reserved.

Multiyear, Multinational Survey of the Incidence and Global Distribution of Metallo-β-Lactamase-Producing Enterobacteriaceae and Pseudomonas aeruginosa

PubMed Central

Rabine, Sharon; Hackel, Meredith; McLaughlin, Robert E.; Biedenbach, Douglas J.; Bouchillon, Samuel K.; Sahm, Daniel F.; Bradford, Patricia A.

2015-01-01

Metallo-β-lactamases (MBLs) hydrolyze all classes of β-lactams except monobactams and are not inhibited by classic serine β-lactamase inhibitors. Gram-negative pathogens isolated from patient infections were collected from 202 medical centers in 40 countries as part of a global surveillance study from 2012 to 2014. Carbapenem-nonsusceptible Enterobacteriaceae and Pseudomonas aeruginosa were characterized for bla genes encoding VIM, IMP, NDM, SPM, and GIM variants using PCR and sequencing. A total of 471 MBL-positive isolates included the following species (numbers of isolates are in parentheses): P. aeruginosa (308), Klebsiella spp. (85), Enterobacter spp. (39), Proteeae (16), Citrobacter freundii (12), Escherichia coli (6), and Serratia marcescens (5) and were submitted by sites from 34 countries. Of these, 69.6% were collected in 9 countries (numbers of isolates are in parentheses): Russia (72), Greece (61), Philippines (54), Venezuela (29), and Kuwait, Nigeria, Romania, South Africa, and Thailand (20 to 25 isolates each). Thirty-two different MBL variants were detected (14 VIM, 14 IMP, and 4 NDM enzymes). Seven novel MBL variants were encountered in the study, each differing from a previously reported variant by one amino acid substitution: VIM-42 (VIM-1 [V223I]), VIM-43 (VIM-4 [A24V]), VIM-44 (VIM-2 [K257N]), VIM-45 (VIM-2 [T35I]), IMP-48 (IMP-14 [I69T]), IMP-49 (IMP-18 [V49F]), and NDM-16 (NDM-1 [R264H]). The in vitro activities of all tested antibiotics against MBL-positive Enterobacteriaceae were significantly reduced with the exception of that of aztreonam-avibactam (MIC90, 0.5 to 1 μg/ml), whereas colistin was the most effective agent against MBL-positive P. aeruginosa isolates (>97% susceptible). Although the global percentage of isolates encoding MBLs remains relatively low, their detection in 12 species, 34 countries, and all regions participating in this surveillance study is concerning. PMID:26643349

Comparative microstructural and corrosion development of VCrNiCoFeCu equiatomic multicomponent alloy produced by induction melting and spark plasma sintering

NASA Astrophysics Data System (ADS)

Fazakas, É.; Heczel, A.; Molnár, D.; Varga, B.; Zadorozhnyy, V.; Vida, Á.

2018-03-01

The present study focuses on the corrosion behavior of a single-phase FCC high entropy alloy (VCrNiCoFeCu) casted by two different methods: induction melting and spark plasma sintering. The corrosion resistance has been evaluated using immersion tests in 3.5% NaCl solution, the potentiodynamic polarization measurements and the results are compared how is dependent the corrosion rate as a function of the production methods. Our results show that induction melted sample is stable in salty environment. On the other hand, based on the changes of polarization curves, there must be an evolution of oxide films on the SPSed sample until reaching the stable oxide layer.

Effects of Vegetable Oil Type and Lipophilic Emulsifiers on the Induction Period of Fat Crystallization.

PubMed

Miyagawa, Yayoi; Ogawa, Takenobu; Nakagawa, Kyuya; Adachi, Shuji

2015-01-01

The induction period of crystallization, which is defined as the time required for oil to start to crystallize, is useful indicator of the freeze-thaw stability of food emulsions such as mayonnaise. We investigated the induction period of vegetable oils with low melting points, such as rapeseed and soybean oils, which are commonly employed for mayonnaise production. The induction period was measured by monitoring the temperature of a specimen during storage at low temperature. The induction period depended on the type of oil and lipophilic emulsifier, emulsifier concentration, and storage temperature. The effect of the oil type on the induction period depended on the composition of the oil. Differential scanning calorimetry (DSC) analyses of the lipophilic emulsifiers suggested that the melting trend of the emulsifier is strongly related to the induction period.

Numerical and Experimental Modeling of the Recirculating Melt Flow Inside an Induction Crucible Furnace

NASA Astrophysics Data System (ADS)

Asad, Amjad; Bauer, Katrin; Chattopadhyay, Kinnor; Schwarze, Rüdiger

2018-06-01

In the paper, a new water model of the turbulent recirculating flow in an induction furnace is introduced. The water model was based on the principle of the stirred vessel used in process engineering. The flow field in the water model was measured by means of particle image velocimetry in order to verify the model's performance. Here, it is indicated that the flow consists of two toroidal vortices similar to the flow in the induction crucible furnace. Furthermore, the turbulent flow in the water model is investigated numerically by adopting eddy-resolving turbulence modeling. The two toroidal vortices occur in the simulations as well. The numerical approaches provide identical time-averaged flow patterns. Moreover, a good qualitative agreement is observed on comparing the experimental and numerical results. In addition, a numerical simulation of the melt flow in a real induction crucible furnace was performed. The turbulent kinetic energy spectrum of the flow in the water model was compared to that of the melt flow in the induction crucible furnace to show the similarity in the nature of turbulence.

Rolling Contact Fatigue Life and Spall Propagation Characteristics of AISI M50, M50 NiL, and AISI 52100. Part 3. Metallurgical Examination (Preprint)

DTIC Science & Technology

2009-10-01

bearing materials, namely AISI 52100, VIM-VAR M50 , and VIM-VAR M50 NiL steels . While...propagation characteristics of three bearing materials, namely AISI 52100, VIM-VAR M50 , and VIM-VAR M50 NiL steels . While there is substantial prior work...deformation from run in. Residual stress profiles for bearing 075B are shown in Figure 3. The bearing is made from M50 steel and the spall

Genomic Characterization of VIM Metallo-β-Lactamase-Producing Alcaligenes faecalis from Gaza, Palestine.

PubMed

Al Laham, Nahed; Chavda, Kalyan D; Cienfuegos-Gallet, Astrid V; Kreiswirth, Barry N; Chen, Liang

2017-11-01

Carbapenemase-producing Gram-negative bacteria (CP-GNB) have increasingly spread worldwide, and different families of carbapenemases have been identified in various bacterial species. Here, we report the identification of five VIM metallo-β-lactamase-producing Alcaligenes faecalis isolates associated with a small outbreak in a large hospital in Gaza, Palestine. Next-generation sequencing analysis showed bla VIM-2 is harbored by a chromosomal genomic island among three strains, while bla VIM-4 is carried by a novel plasmid in two strains. Copyright © 2017 American Society for Microbiology.

Genomic characterisation of clinical and environmental Pseudomonas putida group strains and determination of their role in the transfer of antimicrobial resistance genes to Pseudomonas aeruginosa.

PubMed

Peter, Silke; Oberhettinger, Philipp; Schuele, Leonard; Dinkelacker, Ariane; Vogel, Wichard; Dörfel, Daniela; Bezdan, Daniela; Ossowski, Stephan; Marschal, Matthias; Liese, Jan; Willmann, Matthias

2017-11-10

Pseudomonas putida is a Gram-negative, non-fermenting bacterium frequently encountered in various environmental niches. P. putida rarely causes disease in humans, though serious infections and outbreaks have been reported from time to time. Some have suggested that P. putida functions as an exchange platform for antibiotic resistance genes (ARG), and thus represents a serious concern in the spread of ARGs to more pathogenic organisms within a hospital. Though poorly understood, the frequency of ARG exchange between P. putida and the more virulent Pseudomonas aeruginosa and its clinical relevance are particularly important for designing efficient infection control strategies, such as deciding whether high-risk patients colonized with a multidrug resistant but typically low pathogenic P. putida strain should be contact isolated or not. In this study, 21,373 screening samples (stool, rectal and throat swab) were examined to determine the presence of P. putida in a high-risk group of haemato-oncology patients during a 28-month period. A total of 89 P. putida group strains were isolated from 85 patients, with 41 of 89 (46.1%) strains harbouring the metallo-beta-lactamase gene bla VIM . These 41 clinical isolates, plus 18 bla VIM positive environmental P. putida isolates, and 17 bla VIM positive P. aeruginosa isolates, were characterized by whole genome sequencing (WGS). We constructed a maximum-likelihood tree to separate the 59 bla VIM positive P. putida group strains into eight distinct phylogenetic clusters. Bla VIM-1 was present in 6 clusters while bla VIM-2 was detected in 4 clusters. Five P. putida group strains contained both, bla VIM-1 and bla VIM-2 genes. In contrast, all P. aeruginosa strains belonged to a single genetic cluster and contained the same ARGs. Apart from bla VIM-2 and sul genes, no other ARGs were shared between P. aeruginosa and P. putida. Furthermore, the bla VIM-2 gene in P. aeruginosa was predicted to be only chromosomally located. These data provide evidence that no exchange of comprehensive ARG harbouring mobile genetic elements had occurred between P. aeruginosa and P. putida group strains during the study period, thus eliminating the need to implement enhanced infection control measures for high-risk patients colonized with a bla VIM positiv P. putida group strains in our clinical setting.

Evaluation of Metallo-β-Lactamase-Production and Carriage of bla-VIM Genes in Pseudomonas aeruginosa Isolated from Burn Wound Infections in Isfahan

PubMed Central

Saffari, Mahmood; Firoozeh, Farzaneh; Pourbabaee, Mohammad; Zibaei, Mohammad

2016-01-01

Background Metallo-β-lactamase-production among Gram-negative bacteria, including Pseudomonas aeruginosa, has become a challenge for treatment of infections due to these resistant bacteria. Objectives The aim of the current study was to evaluate the metallo-β-lactamase-production and carriage of bla-VIM genes among carbapenem-resistant P. aeruginosa isolated from burn wound infections. Patients and Methods A cross-sectional study was conducted from September 2014 to July 2015. One hundred and fifty P. aeruginosa isolates were recovered from 600 patients with burn wound infections treated at Imam-Musa-Kazem Hospital in Isfahan city, Iran. Carbapenem-resistant P. aeruginosa isolates were screened by disk diffusion using CLSI guidelines. Metallo-β-lactamase-producing P. aeruginosa isolates were identified using an imipenem-EDTA double disk synergy test (EDTA-IMP DDST). For detection of MBL genes including bla-VIM-1 and bla-VIM-2, polymerase chain reaction (PCR) methods and sequencing were used. Results Among the 150 P. aeruginosa isolates, 144 (96%) were resistant to imipenem by the disk diffusion method, all of which were identified as metallo-β-lactamase-producing P. aeruginosa isolates by EDTA-IMP DDST. Twenty-seven (18%) and 8 (5.5%) MBL-producing P. aeruginosa isolates harbored bla-VIM-1 and bla-VIM-2 genes, respectively. Conclusions Our findings showed a high occurrence of metallo-β-lactamase production among P. aeruginosa isolates in burn patient infections in our region. Also, there are P. aeruginosa isolates carrying the bla-VIM-1 and bla-VIM-2 genes in Isfahan province. PMID:28144604

Pleasant music as a countermeasure against visually induced motion sickness.

PubMed

Keshavarz, Behrang; Hecht, Heiko

2014-05-01

Visually induced motion sickness (VIMS) is a well-known side-effect in virtual environments or simulators. However, effective behavioral countermeasures against VIMS are still sparse. In this study, we tested whether music can reduce the severity of VIMS. Ninety-three volunteers were immersed in an approximately 14-minute-long video taken during a bicycle ride. Participants were randomly assigned to one of four experimental groups, either including relaxing music, neutral music, stressful music, or no music. Sickness scores were collected using the Fast Motion Sickness Scale and the Simulator Sickness Questionnaire. Results showed an overall trend for relaxing music to reduce the severity of VIMS. When factoring in the subjective pleasantness of the music, a significant reduction of VIMS occurred only when the presented music was perceived as pleasant, regardless of the music type. In addition, we found a gender effect with women reporting more sickness than men. We assume that the presentation of pleasant music can be an effective, low-cost, and easy-to-administer method to reduce VIMS. Copyright © 2013 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Technology and equipment based on induction melters with ``cold'' crucible for reprocessing active metal waste

NASA Astrophysics Data System (ADS)

Pastushkov, V. G.; Molchanov, A. V.; Serebryakov, V. P.; Smelova, T. V.; Shestoperov, I. N.

2000-07-01

The paper discusses specific features of technology, equipment and control of a single stage RAMW decontamination and melting process in an induction furnace equipped with a "cold" crucible. The calculated and experimental data are given on melting high activity level stainless steel and Zr simulating high activity level metal waste. The work is under way in SSC RF VNIINM.

Sources of diversity of carbapenem resistance levels in Klebsiella pneumoniae carrying blaVIM-1.

PubMed

Loli, A; Tzouvelekis, L S; Tzelepi, E; Carattoli, A; Vatopoulos, A C; Tassios, P T; Miriagou, V

2006-09-01

To elucidate the mechanisms responsible for the diversity of beta-lactam resistance phenotypes among isolates of a VIM-1-producing Klebsiella pneumoniae (VPKP) strain that is endemic in Greek hospitals. Five VPKP clinical isolates were studied. MICs of beta-lactams were determined by agar dilution. PFGE of XbaI-digested genomic DNA was used for typing. Profiles of outer membrane proteins (OMPs) were determined by SDS-PAGE. Selected isolates were transformed with a plasmid encoding the Omp36K porin. beta-Lactamase activities were analysed by IEF and imipenem hydrolysis was assessed by spectrophotometry. VIM-1-encoding, self-transmissible plasmids were characterized by replicon typing, RFLP and hybridization with bla(VIM)- and IS26-specific probes. Characterization of integrons was performed by PCR, cloning and sequencing. Isolates exhibited highly similar PFGE patterns. Imipenem MICs were 2, 4, 16, 32 and 64 mg/L. The isolate with the highest imipenem MIC (Vipm-64) lacked a 36 kDa OMP. Expression of a cloned OmpK36 in this isolate reduced the imipenem MIC to susceptibility levels. Imipenem-hydrolysing activity was significantly higher in Vipm-16 as compared with the other isolates that expressed similar amounts of VIM-1. All isolates transferred beta-lactam resistance to Escherichia coli through conjugative, IncN plasmids that exhibited differences in the RFLP and hybridization patterns with bla(VIM)- and IS26-specific probes. The Vipm-16 plasmid, mediating the higher imipenem MICs among transconjugants, carried two copies of bla(VIM-1). Cloning and sequencing showed In-e541-like integrons truncated at the 5'CS by insertion of IS26 elements at two different positions. A VIM-1-producing strain of K. pneumoniae has evolved through OMP alterations and rearrangements in the bla(VIM-1)-carrying plasmid probably mediated by IS26, generating isolates with imipenem MICs ranging from susceptibility to resistance.

Developing Breast Cancer Program at Xavier; Genomic and Proteomic Analysis of Signaling Pathways Involved in Xenohormone and MEK5 Regulation of Breast Cancer

DTIC Science & Technology

2009-05-01

that upregulations of Vimentin (VIM), Heat shock 70 kDa protein 4 (HSPA4), Glutathione S-transferase P ( GSTP1 ), and Creatine kinase B-type (CKB), and...MEK5 versus MCF-7-VEC cells, vimentin (VIM), glutathione-S-transferase P ( GSTP1 ), and creatine kinase B-type (CKB) were upregulated, and keratin 8...with distinct proteomic changes (upregulation of VIM/vim, GSTP1 / gstp1 , and CKB/ckb; and downregulation of KRT8/krt8, KRT19/krt19, and GSTM3/gstm3). We

Right Brodmann area 18 predicts tremor arrest after Vim radiosurgery: a voxel-based morphometry study.

PubMed

Tuleasca, Constantin; Witjas, Tatiana; Van de Ville, Dimitri; Najdenovska, Elena; Verger, Antoine; Girard, Nadine; Champoudry, Jerome; Thiran, Jean-Philippe; Cuadra, Meritxell Bach; Levivier, Marc; Guedj, Eric; Régis, Jean

2018-03-01

Drug-resistant essential tremor (ET) can benefit from open standard stereotactic procedures, such as deep-brain stimulation or radiofrequency thalamotomy. Non-surgical candidates can be offered either high-focused ultrasound (HIFU) or radiosurgery (RS). All procedures aim to target the same thalamic site, the ventro-intermediate nucleus (e.g., Vim). The mechanisms by which tremor stops after Vim RS or HIFU remain unknown. We used voxel-based morphometry (VBM) on pretherapeutic neuroimaging data and assessed which anatomical site would best correlate with tremor arrest 1 year after Vim RS. Fifty-two patients (30 male, 22 female; mean age 71.6 years, range 49-82) with right-sided ET benefited from left unilateral Vim RS in Marseille, France. Targeting was performed in a uniform manner, using 130 Gy and a single 4-mm collimator. Neurological (pretherapeutic and 1 year after) and neuroimaging (baseline) assessments were completed. Tremor score on the treated hand (TSTH) at 1 year after Vim RS was included in a statistical parametric mapping analysis of variance (ANOVA) model as a continuous variable with pretherapeutic neuroimaging data. Pretherapeutic gray matter density (GMD) was further correlated with TSTH improvement. No a priori hypothesis was used in the statistical model. The only statistically significant region was right Brodmann area (BA) 18 (visual association area V2, p = 0.05, cluster size K c  = 71). Higher baseline GMD correlated with better TSTH improvement at 1 year after Vim RS (Spearman's rank correlation coefficient = 0.002). Routine baseline structural neuroimaging predicts TSTH improvement 1 year after Vim RS. The relevant anatomical area is the right visual association cortex (BA 18, V2). The question whether visual areas should be included in the targeting remains open.

Emergence of Pseudomonas aeruginosa with class 1 integron carrying blaVIM-2 and blaVIM-4 in the University Clinical Hospital of Bialystok (northeastern Poland).

PubMed

Michalska-Falkowska, Anna; Sacha, Paweł Tomasz; Grześ, Henryk; Hauschild, Tomasz; Wieczorek, Piotr; Ojdana, Dominika; Tryniszewska, Elżbieta Anna

2017-07-11

The effectiveness of carbapenems, considered as last-resort antimicrobials in severe infections, becomes compromised by bacterial resistance. The production of metallo-β-lactamases (MBLs) is the most significant threat to carbapenems activity among Pseudomonas aeruginosa. The aim of this study was to assess the presence and type of MBLs genes in carbapenem-resistant P. aeruginosa clinical strains, to identify the location of MBLs genes and to determine genetic relatedness between MBL-producers using pulsed-field gel electrophoresis (PFGE) and multilocus sequence typing (MLST). The first identified MBL-positive (with blaVIM genes) P. aeruginosa strains were isolated from patients hospitalized in the University Clinical Hospital of Bialystok in the period from September 2012 to December 2013. Variants of MBLs genes and variable integron regions were characterized by PCR and sequencing. PFGE was performed after digesting of bacterial genomes by XbaI enzyme. By MLST seven housekeeping genes were analyzed for the determination of sequence type (ST). Three strains carried the blaVIM-2 gene and one harbored the blaVIM-4 gene. The blaVIM genes resided within class 1 integrons. PCR mapping of integrons revealed the presence of four different cassette arrays. Genetic relatedness analysis by PFGE classified VIM-positive strains into four unrelated pulsotypes (A-D). MLST demonstrated the presence of four (ST 111, ST27, and ST17) different sequence type including one previously undescribed new type of ST 2342. Antimicrobial susceptibility testing showed that VIM-positive strains were resistant to carbapenems, cephalosporins, aminoglycosides, and quinolones, intermediate to aztreonam, and susceptible only to colistin. Integrons mapping, PFGE, and MLST results may point to different origin of these strains and independent introduction into hospitalized patients.

VIM-1, VIM-2, and GES-5 Carbapenemases Among Pseudomonas aeruginosa Isolates at a Tertiary Hospital in Istanbul, Turkey.

PubMed

Malkoçoğlu, Gülşah; Aktaş, Elif; Bayraktar, Banu; Otlu, Bariş; Bulut, Mehmet Emin

2017-04-01

Worldwide increase in carbapenem resistance and transferable carbapenemases are significant challenges in treatment of Pseudomonas aeruginosa infections. In this study, investigation of carbapenemase production in carbapenem-resistant P. aeruginosa isolates recovered from clinical specimens in a tertiary hospital was aimed. A total of 84 carbapenem-resistant P. aeruginosa isolates were examined. "Carbapenem inactivation method" (CIM) was used for phenotypic detection of carbapenemase production. The existence of bla KPC , bla NDM , bla IMP , bla VIM , bla OXA-48 , and bla GES genes was investigated by polymerase chain reaction (PCR). Subtypes of the detected genes were identified by sequence analysis. Arbitrarily primed PCR (AP-PCR) was performed to evaluate the clonal relationship among the isolates. The presence of high-risk clones in carbapenemase producers was investigated by Matrix-assisted laser desorption/ionization-time of flight mass spectrometry (MALDI-TOF MS). Three isolates (3.5%) were identified as carbapenemase producers by CIM tests, while PCR tests demonstrated three isolates carrying carbapenemase genes as well. bla VIM gene was found in two isolates and bla GES gene was found in one isolate. Sequence analysis demonstrated that the carbapenemases were VIM-1, VIM-2, and GES-5. AP-PCR yielded high clonal diversity among the isolates. According to MALDI-TOF MS analysis, none of the carbapenemase-producing strains belonged to the high-risk clones. In conclusion, the presence of VIM-1, VIM-2, and GES-5 type carbapenemases in P. aeruginosa isolates was demonstrated for the first time in our hospital, GES-5 being reported for the second time in Turkey. Our results will lead strategies for controlling the spread of carbapenemases and contribute to epidemiological data from Turkey.

Control of electromagnetic stirring by power focusing in large induction crucible furnaces

NASA Astrophysics Data System (ADS)

Frizen, V. E.; Sarapulov, F. N.

2011-12-01

An approach is proposed for the calculation of the operating conditions of an induction crucible furnace at the final stage of melting with the power focused in various regions of melted metal. The calculation is performed using a model based on the method of detailed magnetic equivalent circuits. The combination of the furnace and a thyristor frequency converter is taken into account in modeling.

Kinetics of the melting front movement in process of centrifugal induction surfacing of powder material with nanoscale modificaters

NASA Astrophysics Data System (ADS)

Sasnouski, I.; Kurylionak, A.

2018-03-01

For solving the problem of improving the powder coatings modified by nanostructure components obtained by induction surfacing method tribological characteristics it is necessary to study the kinetics of the powdered layer melting and define the minimum time of melting. For powdered layer predetermined temperature maintenance at sintering mode stage it is required to determine the temperature difference through blank thickness of the for one hundred-day of the define the warm-up swing on of the stocking up by solving the thermal conductivity stationary problem for quill (hollow) cylinder with internal heat source. Herewith, since in practice thickness of the cylinder wall is much less then its diameter and the temperature difference is comparatively small, the thermal conductivity dependence upon the temperature can be treated as negligible. As it was shown by our previous studies, in the induction heating process under powdered material centrifugal surfacing (i.e. before achieving the melting temperature) the temperature distribution in powdered layer thickness may be considered even. Hereinafter, considering the blank part induction heating process quasi-stationarity under Fo big values, it is possible to consider its internal surface heating as developing with constant velocity. As a result of development the melting front movement mathematical model in a powdered material with nanostructure modifiers the minimum surfacing time is defined. It allows to minimize negative impact of thermal influence on formation of applied coating structure, to raise productivity of the process, to lower power inputs and to ensure saving of nonferrous and high alloys by reducing the allowance for machining. The difference of developed mathematical model of melting front movement from previously known is that the surface temperature from which the heat transfer occures is a variable and varies with a time after the linear law.

Interaction of exogenous refractory nanophases with antimony dissolved in liquid iron

NASA Astrophysics Data System (ADS)

Burtsev, V. T.; Anuchkin, S. N.; Samokhin, A. V.

2017-07-01

The heterophase interaction of Al2O3 refractory nanoparticles with a surfactant impurity (antimony) in the Fe-Sb (0.095 wt %)-O (0.008 wt %) system is studied. It is shown that the introduction of 0.06-0.18 wt % Al2O3 nanoparticles (25-83 nm) into a melt during isothermal holding for up to 1200 s leads to a decrease in the antimony content: the maximum degree of antimony removal is 26 rel %. The sessile drop method is used to investigate the surface tension and the density of Fe, Fe-Sb, and Fe-Sb-Al2O3 melts. The polytherms of the surface tension of these melts have a linear character, the removal of antimony from the Fe-Sb-Al2O3 melts depends on the time of melting in a vacuum induction furnace, and the experimental results obtained reveal the kinetic laws of the structure formation in the surface layers of the melts. The determined melt densities demonstrate that the introduction of antimony into the Fe-O melt causes an increase in its compression by 47 rel %. The structure of the Fe-Sb-O melt after the introduction of Al2O3 nanoparticles depends on the time of melting in a vacuum induction furnace.

Induction heating pure vapor source of high temperature melting point materials on electron cyclotron resonance ion source.

PubMed

Kutsumi, Osamu; Kato, Yushi; Matsui, Yuuki; Kitagawa, Atsushi; Muramatsu, Masayuki; Uchida, Takashi; Yoshida, Yoshikazu; Sato, Fuminobu; Iida, Toshiyuki

2010-02-01

Multicharged ions that are needed are produced from solid pure material with high melting point in an electron cyclotron resonance ion source. We develop an evaporator by using induction heating (IH) with multilayer induction coil, which is made from bare molybdenum or tungsten wire without water cooling and surrounding the pure vaporized material. We optimize the shapes of induction coil and vaporized materials and operation of rf power supply. We conduct experiment to investigate the reproducibility and stability in the operation and heating efficiency. IH evaporator produces pure material vapor because materials directly heated by eddy currents have no contact with insulated materials, which are usually impurity gas sources. The power and the frequency of the induction currents range from 100 to 900 W and from 48 to 23 kHz, respectively. The working pressure is about 10(-4)-10(-3) Pa. We measure the temperature of the vaporized materials with different shapes, and compare them with the result of modeling. We estimate the efficiency of the IH vapor source. We are aiming at the evaporator's higher melting point material than that of iron.

Induction heating pure vapor source of high temperature melting point materials on electron cyclotron resonance ion sourcea)

NASA Astrophysics Data System (ADS)

Kutsumi, Osamu; Kato, Yushi; Matsui, Yuuki; Kitagawa, Atsushi; Muramatsu, Masayuki; Uchida, Takashi; Yoshida, Yoshikazu; Sato, Fuminobu; Iida, Toshiyuki

2010-02-01

Multicharged ions that are needed are produced from solid pure material with high melting point in an electron cyclotron resonance ion source. We develop an evaporator by using induction heating (IH) with multilayer induction coil, which is made from bare molybdenum or tungsten wire without water cooling and surrounding the pure vaporized material. We optimize the shapes of induction coil and vaporized materials and operation of rf power supply. We conduct experiment to investigate the reproducibility and stability in the operation and heating efficiency. IH evaporator produces pure material vapor because materials directly heated by eddy currents have no contact with insulated materials, which are usually impurity gas sources. The power and the frequency of the induction currents range from 100to900W and from 48to23kHz, respectively. The working pressure is about 10-4-10-3Pa. We measure the temperature of the vaporized materials with different shapes, and compare them with the result of modeling. We estimate the efficiency of the IH vapor source. We are aiming at the evaporator's higher melting point material than that of iron.

VIMS spectral mapping observations of Titan during the Cassini prime mission

USGS Publications Warehouse

Barnes, J.W.; Soderblom, J.M.; Brown, R.H.; Buratti, B.J.; Sotin, Christophe; Baines, K.H.; Clark, R.N.; Jaumann, R.; McCord, T.B.; Nelson, R.; Le, Mouelic S.; Rodriguez, S.; Griffith, C.; Penteado, P.; Tosi, F.; Pitman, K.M.; Soderblom, L.; Stephan, K.; Hayne, P.; Vixie, G.; Bibring, J.-P.; Bellucci, G.; Capaccioni, F.; Cerroni, P.; Coradini, A.; Cruikshank, D.P.; Drossart, P.; Formisano, V.; Langevin, Y.; Matson, D.L.; Nicholson, P.D.; Sicardy, B.

2009-01-01

This is a data paper designed to facilitate the use of and comparisons to Cassini/visual and infrared mapping spectrometer (VIMS) spectral mapping data of Saturn's moon Titan. We present thumbnail orthographic projections of flyby mosaics from each Titan encounter during the Cassini prime mission, 2004 July 1 through 2008 June 30. For each flyby we also describe the encounter geometry, and we discuss the studies that have previously been published using the VIMS dataset. The resulting compliation of metadata provides a complementary big-picture overview of the VIMS data in the public archive, and should be a useful reference for future Titan studies. ?? 2009 Elsevier Ltd.

Dissemination of VIM-2 producing Pseudomonas aeruginosa ST233 at tertiary care hospitals in Egypt.

PubMed

Zafer, Mai Mahmoud; Al-Agamy, Mohamed Hamed; El-Mahallawy, Hadir Ahmed; Amin, Magdy Aly; El Din Ashour, Seif

2015-03-12

Pseudomonas aeruginosa is an important nosocomial pathogen, commonly causing infections in immunocompromised patients. The aim of this study was to examine the genetic relatedness of metallo-beta-lactamase (MBL) producing carbapenem resistant Pseudomonas aeruginosa clinical isolates collected from 2 tertiary hospitals in Cairo, Egypt using Multi Locus sequence typing (MLST). Phenotypic and genotypic detection of metallo-beta-lactamase for forty eight non-duplicate carbapenem resistant P. aeruginosa isolates were carried out. DNA sequencing and MLST were done. The bla VIM-2 gene was highly prevalent (28/33 strains, 85%) among 33 MBL-positive P.aeruginosa isolates. MLST revealed eleven distinct Sequence Types (STs). A unique ST233 clone producing VIM-2 was documented by MLST in P.aeruginosa strains isolated from Cairo university hospitals. The high prevalence of VIM-2 producers was not due to the spread of a single clone. The findings of the present study clearly demonstrate that clones of VIM-2 positive in our hospitals are different from those reported from European studies. Prevalence of VIM-2 producers of the same clone was detected from surgical specimens whereas oncology related specimens were showing diverse clones.

Carbon-free induction furnace

DOEpatents

Holcombe, Cressie E.; Masters, David R.; Pfeiler, William A.

1985-01-01

An induction furnace for melting and casting highly pure metals and alloys such as uranium and uranium alloys in such a manner as to minimize contamination of the melt by carbon derived from the materials and the environment within the furnace. The subject furnace is constructed of carbon free materials and is housed within a conventional vacuum chamber. The furnace comprises a ceramic oxide crucible for holding the charge of metal or alloy. The heating of the crucible is achieved by a plasma-sprayed tungsten susceptor surrounding the crucible which, in turn, is heated by an RF induction coil separated from the susceptor by a cylinder of inorganic insulation. The furnace of the present invention is capable of being rapidly cycled from ambient temperatures to about 1650.degree. C. for effectively melting uranium and uranium alloys without the attendant carbon contamination problems previously encountered when using carbon-bearing furnace materials.

Non-carbon induction furnace

DOEpatents

Holcombe, C.E.; Masters, D.R.; Pfeiler, W.A.

1984-01-06

The present invention is directed to an induction furnace for melting and casting highly pure metals and alloys such as uranium and uranium alloys in such a manner as to minimize contamination of the melt by carbon derived from the materials and the environment within the furnace. The subject furnace is constructed of non-carbon materials and is housed within a conventional vacuum chamber. The furnace comprises a ceramic oxide crucible for holding the charge of metal or alloys. The heating of the crucible is achieved by a plasma-sprayed tungsten susceptor surrounding the crucible which, in turn, is heated by an rf induction coil separated from the susceptor by a cylinder of inorganic insulation. The furnace of the present invention is capable of being rapidly cycled from ambient temperatures to about 1650/sup 0/C for effectively melting uranium and uranium alloys without the attendant carbon contamination problems previously encountered when using carbon-bearing furnace materials.

VizieR Online Data Catalog: The KepVIM catalog (Makarov+, 2016)

NASA Astrophysics Data System (ADS)

Makarov, V. V.; Goldin, A.

2016-07-01

The algorithm described in section 4 was applied to the entire collection of "long-cadence" files archived in the MAST for the principal Kepler mission. A single variability-induced motion (VIM) detection corresponds to a complete data set for a given target collected during one quarter. Therefore, a single target can generate up to 17 VIM detections in the catalog. (2 data files).

Saturn ring spokes: an overview of their near-infrared spectral properties from Cassini/VIMS data

NASA Astrophysics Data System (ADS)

D'Aversa, E.; Bellucci, G.; Nicholson, P. D.; Brown, R. H.; Altieri, F.; Carrozzo, F. G.

2013-09-01

The B ring of Saturn is known to periodically host weak elongated features called spokes. They have been clearly detected by the Voyagers, by the Hubble Space Telescope and by Cassini instruments ISS and VIMS. These observations were conducted during three different Saturn equinoxes in 1980, 1995, and 2009 respectively, bringing to the current view of the spoke's physical nature: thin clouds of fine electrically-charged grains levitating over the larger ring boulders. In respect to the previous available datasets, the VIMS one has widened our view of spokes outside the visible spectral range for the first time (longward of 1 micron). On the other hand, the VIMS spatial resolution is often comparable with the typical sizes of spokes, and considerable image processing is needed in order to enhance the spoke images and for the spectra extraction. Here we will report about advances in the spoke spectral analysis with VIMS data and will discuss the possible physical interpretations under the assumption of low spoke optical thickness.

IMP-1 and a Novel Metallo-β-Lactamase, VIM-6, in Fluorescent Pseudomonads Isolated in Singapore

PubMed Central

Koh, Tse Hsien; Wang, Grace Chee Yeng; Sng, Li-Hwei

2004-01-01

Four carbapenem-resistant Pseudomonas spp. were isolated from patients in Singapore. One Pseudomonas putida isolate contained a blaIMP-1 identical to that first described in Japan. The sequence of a variant blaIMP-1 in Pseudomonas fluorescens contained four silent mutations compared with the original sequence. The remaining P. putida isolates contained blaVIM-6, a novel VIM gene variant. PMID:15155248

Impaired flow-induced dilation in mesenteric resistance arteries from mice lacking vimentin.

PubMed Central

Henrion, D; Terzi, F; Matrougui, K; Duriez, M; Boulanger, C M; Colucci-Guyon, E; Babinet, C; Briand, P; Friedlander, G; Poitevin, P; Lévy, B I

1997-01-01

The intermediate filament vimentin might play a key role in vascular resistance to mechanical stress. We investigated the responses to pressure (tensile stress) and flow (shear stress) of mesenteric resistance arteries perfused in vitro from vimentin knockout mice. Arteries were isolated from homozygous (Vim-/-, n = 14) or heterozygous vimentin-null mice (Vim+/-, n = 5) and from wild-type littermates (Vim+/+, n = 9). Passive arterial diameter (175+/-15 micron in Vim+/+ at 100 mmHg) and myogenic tone were not affected by the absence of vimentin. Flow-induced (0-150 microl/min) dilation (e. g., 19+/-3 micron dilation at 150 mmHg in Vim+/+) was significantly attenuated in Vim-/- mice (13+/-2 micron dilation, P < 0.01). Acute blockade of nitric oxide synthesis (NG-nitro- L-arginine, 10 microM) significantly decreased flow-induced dilation in both groups, whereas acute blockade of prostaglandin synthesis (indomethacin, 10 microM) had no significant effect. Mean blood pressure, in vivo mesenteric blood flow and diameter, and mesenteric artery media thickness or media to lumen ratio were not affected by the absence of vimentin. Thus, the absence of vimentin decreased selectively the response of resistance arteries to flow, suggesting a role for vimentin in the mechanotransduction of shear stress. PMID:9389758

Metal ion promoted hydrogels for bovine serum albumin adsorption: Cu(II) and Co(II) chelated poly[(N-vinylimidazole)-maleic acid].

PubMed

Pekel, Nursel; Salih, Bekir; Güven, Olgun

2005-05-10

Poly[(N-vinylimidazole)-maleic acid] (poly(VIm-MA)), copolymeric hydrogels were prepared by gamma-irradiating ternary mixtures of N-vinylimidazole-maleic acid-water in a (60)Co-gamma source. Cu(II) and Co(II) ions were chelated within the gels at pH=5.0. The maximum adsorption capacity of the gels were 3.71 mmol/g dry gel for Cu(II) and 1.25 mmol/g dry gel for Co(II) at pH=5.0. The swelling ratios of the gels were 1200% for poly(VIm-MA), 60 and 45% for Cu(II) and Co(II)-chelated poly(VIm-MA) gels at pH=5.0 in acetate buffer solution. These affinity gels with different swelling ratios for plain poly(VIm-MA), Cu(II)-, and Co(II)-chelated poly(VIm-MA), in acetate and phosphate buffers were used in the bovine serum albumin (BSA) adsorption/desorption studies in batch reactor. The maximum BSA adsorption capacities of the gels were 0.38 g/g dry gel for plain, 0.88 g/g dry gel for Cu(II)-chelated poly(VIm-MA) and 1.05 g/g dry gel for Co(II)-chelated poly(VIm-MA) gels. Adsorption capacity of BSA by the gels was reduced dramatically by increasing the ionic strength adjusted with NaCl. More than 95% of BSA were desorbed in 10 h in desorption medium containing 0.1M of EDTA for metal ion-chelated gels at pH=4.7.

First outbreak of VIM-2 metallo-β-lactamase-producing Pseudomonas aeruginosa in The Netherlands: microbiology, epidemiology and clinical outcomes.

PubMed

Van der Bij, A K; Van Mansfeld, R; Peirano, G; Goessens, W H F; Severin, J A; Pitout, J D D; Willems, R; Van Westreenen, M

2011-06-01

This study was designed to investigate the prevalence and characteristics of metallo-β-lactamase (MBL)-producing Pseudomonas aeruginosa in a tertiary care centre in The Netherlands, a country that is considered to have a low prevalence of antibiotic-resistant bacteria. Imipenem-resistant P. aeruginosa isolates cultured from clinical specimens during 2008-2009 were analysed phenotypically and molecularly by polymerase chain reaction (PCR) with sequencing. Genotyping was performed by multiple-locus variable-number tandem repeat (VNTR) analysis (MLVA). Clinical information was obtained by electronic chart review for all patients infected or colonised with an imipenem-resistant P. aeruginosa isolate that was included in the study. In total, 106 imipenem-resistant P. aeruginosa isolates were included. The bla(VIM-2) gene was detected in 35/106 isolates (33%) and was associated with integrons. Compared with non-MBL-producing imipenem-resistant P. aeruginosa, VIM-2 MBL-producing isolates showed higher rates of multidrug resistance. Patients with VIM-2 MBL-producing isolates were more likely to be admitted to the Intensive Care Unit (ICU) and had a higher risk of invasive infection, including development of bacteraemia. MLVA identified two separate VIM-2 MBL-producing clones, responsible for outbreaks in the ICU but also affecting 10 other departments. This is the first reported outbreak of VIM-2 MBL-producing P. aeruginosa in The Netherlands. Once introduced, VIM-2 MBL-producing P. aeruginosa cause significant infections and are easily spread within the hospital setting. Copyright © 2011 Elsevier B.V. and the International Society of Chemotherapy. All rights reserved.

40 CFR 63.11556 - What definitions apply to this subpart?

Code of Federal Regulations, 2011 CFR

2011-07-01

... nonferrous foundry HAP. Melting operations (the affected source) means the collection of furnaces (e.g., induction, reverberatory, crucible, tower, dry hearth) used to melt metal ingot, alloyed ingot and/or metal...

40 CFR 63.11556 - What definitions apply to this subpart?

Code of Federal Regulations, 2013 CFR

2013-07-01

... nonferrous foundry HAP. Melting operations (the affected source) means the collection of furnaces (e.g., induction, reverberatory, crucible, tower, dry hearth) used to melt metal ingot, alloyed ingot and/or metal...

40 CFR 63.11556 - What definitions apply to this subpart?

Code of Federal Regulations, 2012 CFR

2012-07-01

... nonferrous foundry HAP. Melting operations (the affected source) means the collection of furnaces (e.g., induction, reverberatory, crucible, tower, dry hearth) used to melt metal ingot, alloyed ingot and/or metal...

40 CFR 63.11556 - What definitions apply to this subpart?

Code of Federal Regulations, 2014 CFR

2014-07-01

... nonferrous foundry HAP. Melting operations (the affected source) means the collection of furnaces (e.g., induction, reverberatory, crucible, tower, dry hearth) used to melt metal ingot, alloyed ingot and/or metal...

40 CFR 63.11556 - What definitions apply to this subpart?

Code of Federal Regulations, 2010 CFR

2010-07-01

... nonferrous foundry HAP. Melting operations (the affected source) means the collection of furnaces (e.g., induction, reverberatory, crucible, tower, dry hearth) used to melt metal ingot, alloyed ingot and/or metal...

Patterns of glaucomatous visual field loss in sita fields automatically identified using independent component analysis.

PubMed

Goldbaum, Michael H; Jang, Gil-Jin; Bowd, Chris; Hao, Jiucang; Zangwill, Linda M; Liebmann, Jeffrey; Girkin, Christopher; Jung, Tzyy-Ping; Weinreb, Robert N; Sample, Pamela A

2009-12-01

To determine if the patterns uncovered with variational Bayesian-independent component analysis-mixture model (VIM) applied to a large set of normal and glaucomatous fields obtained with the Swedish Interactive Thresholding Algorithm (SITA) are distinct, recognizable, and useful for modeling the severity of the field loss. SITA fields were obtained with the Humphrey Visual Field Analyzer (Carl Zeiss Meditec, Inc, Dublin, California) on 1,146 normal eyes and 939 glaucoma eyes from subjects followed by the Diagnostic Innovations in Glaucoma Study and the African Descent and Glaucoma Evaluation Study. VIM modifies independent component analysis (ICA) to develop separate sets of ICA axes in the cluster of normal fields and the 2 clusters of abnormal fields. Of 360 models, the model with the best separation of normal and glaucomatous fields was chosen for creating the maximally independent axes. Grayscale displays of fields generated by VIM on each axis were compared. SITA fields most closely associated with each axis and displayed in grayscale were evaluated for consistency of pattern at all severities. The best VIM model had 3 clusters. Cluster 1 (1,193) was mostly normal (1,089, 95% specificity) and had 2 axes. Cluster 2 (596) contained mildly abnormal fields (513) and 2 axes; cluster 3 (323) held mostly moderately to severely abnormal fields (322) and 5 axes. Sensitivity for clusters 2 and 3 combined was 88.9%. The VIM-generated field patterns differed from each other and resembled glaucomatous defects (eg, nasal step, arcuate, temporal wedge). SITA fields assigned to an axis resembled each other and the VIM-generated patterns for that axis. Pattern severity increased in the positive direction of each axis by expansion or deepening of the axis pattern. VIM worked well on SITA fields, separating them into distinctly different yet recognizable patterns of glaucomatous field defects. The axis and pattern properties make VIM a good candidate as a preliminary process for detecting progression.

Global simulation of the induction heating TSSG process of SiC for the effects of Marangoni convection, free surface deformation and seed rotation

NASA Astrophysics Data System (ADS)

Yamamoto, Takuya; Okano, Yasunori; Ujihara, Toru; Dost, Sadik

2017-07-01

A global numerical simulation was performed for the induction heating Top-Seeded Solution Growth (TSSG) process of SiC. Analysis included the furnace and growth melt. The effects of interfacial force due to free surface tension gradient, the RF coil-induced electromagnetic body force, buoyancy, melt free surface deformation, and seed rotation were examined. The simulation results showed that the contributions of free surface tension gradient and the electromagnetic body force to the melt flow are significant. Marangoni convection affects the growth process adversely by making the melt flow downward in the region under the seed crystal. This downward flow reduces carbon flux into the seed and consequently lowers growth rate. The effects of free surface deformation and seed rotation, although positive, are not so significant compared with those of free surface tension gradient and the electromagnetic body force. Due to the small size of the melt the contribution of buoyancy is also small.

Carbapenem-resistant Citrobacter spp. isolated in Spain from 2013 to 2015 produced a variety of carbapenemases including VIM-1, OXA-48, KPC-2, NDM-1 and VIM-2.

PubMed

Arana, David M; Ortega, Adriana; González-Barberá, Eva; Lara, Noelia; Bautista, Verónica; Gómez-Ruíz, Dolores; Sáez, David; Fernández-Romero, Sara; Aracil, Belén; Pérez-Vázquez, María; Campos, José; Oteo, Jesús

2017-12-01

There is little information about carbapenemase-producing (CP) Citrobacter spp. We studied the molecular epidemiology and microbiological features of CP Citrobacter spp. isolates collected in Spain (2013-15). In total, 119 isolates suspected of being CP by the EUCAST screening cut-off values were analysed. Carbapenemases and ESBLs were characterized using PCR and sequencing. The genetic relationship among Citrobacter freundii isolates was studied by PFGE. Of the 119 isolates, 63 (52.9%) produced carbapenemases, of which 37 (58.7%) produced VIM-1, 20 (31.7%) produced OXA-48, 12 (19%) produced KPC-2, 2 (3.2%) produced NDM-1 and 1 (1.6%) produced VIM-2; 9 C. freundii isolates co-produced VIM-1 plus OXA-48. Fourteen isolates (22.2%) also carried ESBLs: 8 CTX-M-9 plus SHV-12, 2 CTX-M-9, 2 SHV-12 and 2 CTX-M-15. Fifty-seven isolates (90.5%) were C. freundii, 4 (6.3%) were Citrobacter koseri, 1 (1.6%) was Citrobacter amalonaticus and 1 (1.6%) was Citrobacter braakii. By EUCAST breakpoints, eight (12.7%) of the CP isolates were susceptible to the four carbapenems tested. In the 53 CP C. freundii analysed by PFGE, a total of 44 different band patterns were observed. Four PFGE clusters were identified: cluster 1 included eight isolates co-producing VIM-1 and OXA-48; blaVIM-1 was carried in a class 1 integron (intI-blaVIM-1-aacA4-dfrB1-aadA1-catB2-qacEΔ1/sul1) and blaOXA-48 was carried in a Tn1999.2 transposon. We observed the clonal and polyclonal spread of CP Citrobacter spp. across several Spanish geographical areas. Four species of Citrobacter spp. produced up to five carbapenemase types, including co-production of VIM-1 plus OXA-48. Some CP Citrobacter spp. isolates were susceptible to the four carbapenems tested, a finding with potential clinical implications. © The Author 2017. Published by Oxford University Press on behalf of the British Society for Antimicrobial Chemotherapy. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Antibiotic resistance pattern and evaluation of metallo-beta lactamase genes (VIM and IMP) in Pseudomonas aeruginosa strains producing MBL enzyme, isolated from patients with secondary immunodeficiency

PubMed Central

Shirani, Kiana; Ataei, Behrouz; Roshandel, Fardad

2016-01-01

Background: One of the most common causes of hospital-acquired secondary infections in hospitalized patients is Pseudomonas aeruginosa. The aim of this study is to evaluate the expression of IMP and VIM in Pseudomonas aeruginosa strains (carbapenem resistant and producer MBL enzyme) in patients with secondary immunodeficiency. Materials and Methods: In a cross sectional study, 96 patients with secondary immunodeficiency hospitalized in the Al-Zahra hospital were selected. Carbapenem resistant strains isolated and modified Hodge test was performed in order to confirm the presence of the metallo carbapenemase enzyme. Under the standard conditions they were sent to the central laboratory for investigating nosocomial infection Multiplex PCR. Results: Of 96 samples 28.1% were IMP positive, 5.2% VIM positive and 3.1% both VIM and IMP positive. The prevalence of multidrug resistance in the IMP and/or VIM negative samples was 29%, while all 5 VIM positive samples have had multidrug resistance. Also the prevalence of multi-drug resistance in IMP positive samples were 96.3% and in IMP and VIM positive samples were 100%. According to Fisher’s test, the prevalence of multi-drug resistance based on gene expression has significant difference (P < 0.001). Conclusion: Based on the results of this study it can be concluded that, a significant percentage of patients with secondary immunodeficiency that suffer nosocomial infections with multidrug resistance, especially Pseudomonas aeruginosa, are probably MBL-producing gene positive. Therefore the cause of infection should be considered in the hospital care system to identify their features, the presence of genes involved in the development of multi-drug resistance and antibiotic therapy. PMID:27563634

Unsupervised Gaussian Mixture-Model With Expectation Maximization for Detecting Glaucomatous Progression in Standard Automated Perimetry Visual Fields.

PubMed

Yousefi, Siamak; Balasubramanian, Madhusudhanan; Goldbaum, Michael H; Medeiros, Felipe A; Zangwill, Linda M; Weinreb, Robert N; Liebmann, Jeffrey M; Girkin, Christopher A; Bowd, Christopher

2016-05-01

To validate Gaussian mixture-model with expectation maximization (GEM) and variational Bayesian independent component analysis mixture-models (VIM) for detecting glaucomatous progression along visual field (VF) defect patterns (GEM-progression of patterns (POP) and VIM-POP). To compare GEM-POP and VIM-POP with other methods. GEM and VIM models separated cross-sectional abnormal VFs from 859 eyes and normal VFs from 1117 eyes into abnormal and normal clusters. Clusters were decomposed into independent axes. The confidence limit (CL) of stability was established for each axis with a set of 84 stable eyes. Sensitivity for detecting progression was assessed in a sample of 83 eyes with known progressive glaucomatous optic neuropathy (PGON). Eyes were classified as progressed if any defect pattern progressed beyond the CL of stability. Performance of GEM-POP and VIM-POP was compared to point-wise linear regression (PLR), permutation analysis of PLR (PoPLR), and linear regression (LR) of mean deviation (MD), and visual field index (VFI). Sensitivity and specificity for detecting glaucomatous VFs were 89.9% and 93.8%, respectively, for GEM and 93.0% and 97.0%, respectively, for VIM. Receiver operating characteristic (ROC) curve areas for classifying progressed eyes were 0.82 for VIM-POP, 0.86 for GEM-POP, 0.81 for PoPLR, 0.69 for LR of MD, and 0.76 for LR of VFI. GEM-POP was significantly more sensitive to PGON than PoPLR and linear regression of MD and VFI in our sample, while providing localized progression information. Detection of glaucomatous progression can be improved by assessing longitudinal changes in localized patterns of glaucomatous defect identified by unsupervised machine learning.

Antibiotic resistance pattern and evaluation of metallo-beta lactamase genes (VIM and IMP) in Pseudomonas aeruginosa strains producing MBL enzyme, isolated from patients with secondary immunodeficiency.

PubMed

Shirani, Kiana; Ataei, Behrouz; Roshandel, Fardad

2016-01-01

One of the most common causes of hospital-acquired secondary infections in hospitalized patients is Pseudomonas aeruginosa. The aim of this study is to evaluate the expression of IMP and VIM in Pseudomonas aeruginosa strains (carbapenem resistant and producer MBL enzyme) in patients with secondary immunodeficiency. In a cross sectional study, 96 patients with secondary immunodeficiency hospitalized in the Al-Zahra hospital were selected. Carbapenem resistant strains isolated and modified Hodge test was performed in order to confirm the presence of the metallo carbapenemase enzyme. Under the standard conditions they were sent to the central laboratory for investigating nosocomial infection Multiplex PCR. Of 96 samples 28.1% were IMP positive, 5.2% VIM positive and 3.1% both VIM and IMP positive. The prevalence of multidrug resistance in the IMP and/or VIM negative samples was 29%, while all 5 VIM positive samples have had multidrug resistance. Also the prevalence of multi-drug resistance in IMP positive samples were 96.3% and in IMP and VIM positive samples were 100%. According to Fisher's test, the prevalence of multi-drug resistance based on gene expression has significant difference (P < 0.001). Based on the results of this study it can be concluded that, a significant percentage of patients with secondary immunodeficiency that suffer nosocomial infections with multidrug resistance, especially Pseudomonas aeruginosa, are probably MBL-producing gene positive. Therefore the cause of infection should be considered in the hospital care system to identify their features, the presence of genes involved in the development of multi-drug resistance and antibiotic therapy.

The VIMS Data Explorer: A tool for locating and visualizing hyperspectral data

NASA Astrophysics Data System (ADS)

Pasek, V. D.; Lytle, D. M.; Brown, R. H.

2016-12-01

Since successfully entering Saturn's orbit during Summer 2004 there have been over 300,000 hyperspectral data cubes returned from the visible and infrared mapping spectrometer (VIMS) instrument onboard the Cassini spacecraft. The VIMS Science Investigation is a multidisciplinary effort that uses these hyperspectral data to study a variety of scientific problems, including surface characterizations of the icy satellites and atmospheric analyses of Titan and Saturn. Such investigations may need to identify thousands of exemplary data cubes for analysis and can span many years in scope. Here we describe the VIMS data explorer (VDE) application, currently employed by the VIMS Investigation to search for and visualize data. The VDE application facilitates real-time inspection of the entire VIMS hyperspectral dataset, the construction of in situ maps, and markers to save and recall work. The application relies on two databases to provide comprehensive search capabilities. The first database contains metadata for every cube. These metadata searches are used to identify records based on parameters such as target, observation name, or date taken; they fall short in utility for some investigations. The cube metadata contains no target geometry information. Through the introduction of a post-calibration pixel database, the VDE tool enables users to greatly expand their searching capabilities. Users can select favorable cubes for further processing into 2-D and 3-D interactive maps, aiding in the data interpretation and selection process. The VDE application enables efficient search, visualization, and access to VIMS hyperspectral data. It is simple to use, requiring nothing more than a browser for access. Hyperspectral bands can be individually selected or combined to create real-time color images, a technique commonly employed by hyperspectral researchers to highlight compositional differences.

Evaluation of Etest MBL for Detection of blaIMP-1 and blaVIM-2 Allele-Positive Clinical Isolates of Pseudomonas spp. and Acinetobacter spp.

PubMed Central

Lee, Kyungwon; Yong, Dongeun; Yum, Jong Hwa; Lim, Yong Sik; Bolmström, Anne; Qwärnström, Anette; Karlsson, Åsa; Chong, Yunsop

2005-01-01

The Etest MBL (AB BIODISK, Solna, Sweden) correctly differentiated all 57 isolates of Acinetobacter spp. and Pseudomonas aeruginosa with the blaIMP-1 allele and 135 of 137 (98.5%) Acinetobacter spp. and Pseudomonas spp. isolates with the blaVIM-2 allele. The Etest MBL was reliable for detecting the IMP-1- and VIM-2-producing Pseudomonas and Acinetobacter isolates. PMID:15695713

Inactivation of vimF, a Putative Glycosyltransferase Gene Downstream of vimE, Alters Glycosylation and Activation of the Gingipains in Porphyromonas gingivalis W83

PubMed Central

Vanterpool, Elaine; Roy, Francis; Fletcher, Hansel M.

2005-01-01

Regulation/activation of the Porphyromonas gingivalis gingipains is poorly understood. A 1.2-kb open reading frame, a putative glycosyltransferase, downstream of vimE, was cloned, insertionally inactivated using the ermF-ermAM antibiotic resistance cassette, and used to create a defective mutant by allelic exchange. In contrast to the wild-type W83 strain, this mutant, designated P. gingivalis FLL95, was nonpigmented and nonhemolytic when plated on Brucella blood agar. Arginine- and lysine-specific gingipain activities were reduced by approximately 97% and 96%, respectively, relative to that of the parent strain. These activities were unaffected by the growth phase, in contrast to the vimA-defective mutant P. gingivalis FLL92. Expression of the rgpA, rgpB, and kgp gingipain genes was unaffected in P. gingivalis FLL95 in comparison to the wild-type strain. In nonactive gingipain extracellular protein fractions, multiple high-molecular-weight proteins immunoreacted with gingipain-specific antibodies. The specific gingipain-associated sugar moiety recognized by monoclonal antibody 1B5 was absent in FLL95. Taken together, these results suggest that the vimE downstream gene, designated vimF (virulence modulating gene F), which is a putative glycosyltransferase group 1, is involved in the regulation of the major virulence factors of P. gingivalis. PMID:15972484

Teratocarcinomas induced by embryonic stem (ES) cells lacking vimentin: an approach to study the role of vimentin in tumorigenesis.

PubMed

Langa, F; Kress, C; Colucci-Guyon, E; Khun, H; Vandormael-Pournin, S; Huerre, M; Babinet, C

2000-10-01

Vimentin is a class III intermediate filament protein widely expressed in the developing embryo and in cells of mesenchymal origin in the adult. Vimentin knock-out mice develop and reproduce without any obvious defect. This is an unexpected finding in view of the high degree of conservation of the vimentin gene among vertebrates. However, it does not exclude the possibility of a role for vimentin in pathological conditions, like tumorigenesis. To address this question directly, we have used a teratocarcinoma model involving the injection of ES cells into syngeneic mice. ES cells lacking vimentin were generated from 129/Sv Vim-/- mice with high efficiency. The absence of vimentin did not affect ES cell morphology, viability or growth rate in vitro. Tumours were induced by subcutaneous injection of either Vim-/- or Vim+/+ ES cells into Vim+/+ and Vim-/- mice, in order to analyse the effect of the absence of vimentin in either the tumorigenic cells or the host mice. No significant differences were found in either tumour incidence, size or vascularization of teratocarcinomas obtained with all possible combinations. Vim-/- ES-derived tumours showed the same cellular composition typical of teratocarcinomas induced by wild-type ES cells together with a very similar apoptotic pattern. Taken together, these results demonstrate that in this model vimentin is not essential for efficient tumour growth and differentiation in vivo.

Effect of Reduced Flux Iron Ore Pellets on Removal of Impurities from Pig Iron During Induction Melting: A New Phenomenon

NASA Astrophysics Data System (ADS)

Dishwar, Raj Kumar; Agrawal, Shavi; Mandal, A. K.; Mahobia, G. S.; Sinha, O. P.

2018-06-01

The present work represents a comparative study of impurity removal (sulfur, phosphorus, and carbon) from pig iron melt by the addition of lime powder and reduced fluxed iron ore pellets separately in a 5-kg-capacity induction melting furnace. Two types of reduced flux pellets (80% and 50%) of similar basicity ( 3.06) were charged separately into the pool to obtain the different oxidizing atmospheres of the bath. Results showed that the rate of impurity removal increases up to 6 min of exposure time and decreases afterward. Only lime powder charging, sulfur ( 77%), and a small fraction of carbon were removed from pig iron. Phosphorous ( 41%), sulfur ( 53%), and carbon ( 96%) were removed simultaneously when 80% reduced fluxed pellets were used. The present study indicates that the optimum removal of impurities is possible by charging 80% reduced flux iron ore pellets from the pig iron melt.

Technical Case Report of Deep Brain Stimulation: Is it Possible Single Electrode Reach to Both of Subthalamic Nucleus and Ventral Intermediate Nucleus in One Stage?

PubMed

Kaptan, Hülagu; Çakmur, Raif

2018-04-15

The primary target of this operation is Ventral Intermediate Nucleus (VIM); however VIM - Subthalamic Nucleus (STN) were tried to be reached with one electrode, adjusting the angle well, the coronal section; medial of VIM can partially reach the STN. Using the properties of the electrode; we believe we could act on a wide area. An analysis was performed on one patient who underwent VIM Deep Brain Stimulation (DBS) in 3 periods (pre - peri - post-operation). A 53 - year - old woman diagnosed with Parkinson's disease 8 years earlier including symptoms of severe tremor on the right than left underwent bilateral DBS VIM. Obtaining a satisfactory improvement of tremor, the patient did well, and postoperative complications were not observed. The patient was discharged from hospital on postoperative thirty day. It is certain that more research and experience are needed. However, we believe that the two targets can reach the same point and the second operations for another target can be avoided.We believe that this initiative is advantageous and promising regarding patient and cost.

Detection of VIM- and IMP-type Metallo-Beta-Lactamase Genes in Acinetobacter baumannii Isolates from Patients in Two Hospitals in Tehran

PubMed Central

Davoodi, Saba; Boroumand, Mohammad Ali; Sepehriseresht, Saeed; Pourgholi, Leila

2015-01-01

Background Acinetobacter baumannii, is an opportunistic pathogen and is responsible for numerous nosocomial infections. In recent years, this microorganism has been resistant to a wide range of antibiotics. One of the most important mechanisms of resistance in this microorganism is production of metallo-beta-lactamases (MBLs). Objectives The aim of this study was to detect VIM- and IMP-type metallo-beta-lactamase genes in Acinetobacter baumanniiisolates from patients in two Hospitals in Tehran. Materials and Methods 104 isolates were tested using the PCR method for the identification of VIM- and IMP-type genes. Results vim1, vim2, imp1 and imp2 genes were detected in 6.7%, 41.7%, 50% and 1.7% of the isolates from Tehran Heart Center, and in 29.5%, 38.6%, 4.5% and 4.5% of the isolates from Shahid Mutahhari Hospital respectively. Discussions Our analysis revealed that the majority of the isolates had at least one of these genes, indicating that MBLs production is an important resistance mechanism in Acinetobacter baumannii. PMID:28959283

VIM-D salvage chemotherapy in Hodgkin's disease.

PubMed

Phillips, J K; Spearing, R L; Davies, J M; Hay, C R; Parry, H; Nash, J R; Cawley, J C

1990-01-01

A total of 15 patients with relapsed or resistant Hodgkin's disease were treated with a combination of etoposide (VP16), ifosfamide, mitozantrone and dexamethasone (VIM-D). The regime was well tolerated, the only major toxicity being myelosuppression. Complete remissions (CRs) were obtained in 4 patients and were maintained for 2, 4, 10 and 14 months. 10 subjects subsequently received an autologous bone marrow transplant with high-dose chemotherapy (ABMT). Previous exposure to VIM-D did not appear to predict for or prejudice the response to subsequent ABMT.

8. VIEW OF FOUNDRY INDUCTION FURNACES, MODULE J. THE FOUNDRY ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8. VIEW OF FOUNDRY INDUCTION FURNACES, MODULE J. THE FOUNDRY CASTING PROCESS WAS CONDUCTED IN A VACUUM. PLUTONIUM METAL WAS MELTED IN ONE OF FOUR ELECTRIC INDUCTION FURNACES TO FORM INGOTS. - Rocky Flats Plant, Plutonium Manufacturing Facility, North-central section of Plant, just south of Building 776/777, Golden, Jefferson County, CO

Dissemination of metallo-β-lactamase in Pseudomonas aeruginosa isolates in Egypt: mutation in blaVIM-4.

PubMed

Hashem, Hany; Hanora, Amro; Abdalla, Salah; Shaeky, Alaa; Saad, Alaa

2017-05-01

This study was designed to investigate the prevalence of metallo-β-lactamase (MBL) in Pseudomonas aeruginosa isolates collected from Suez Canal University Hospital in Ismailia, Egypt. Antibiotic susceptibility testing and phenotypic and genotypic screening for MBLs were performed on 147 isolates of P. aeruginosa. MICs were determined by agar dilution method for carbapenem that was ≥2 μg/mL for meropenem. MBL genes were detected by multiplex and monoplex PCR for P. aeruginosa-harbored plasmids. Mutation profile of sequenced MBL genes was screened using online software Clustal Omega. Out of 147 P. aeruginosa, 39 (26.5%) were carbapenem-resistant isolates and 25 (64%) were confirmed to be positive for MBLs. The susceptibility rate of P. aeruginosa toward polymyxin B and norfloxacin was 99% and 88%, respectively. Identification of collected isolates by API analysis and constructed phylogenetic tree of 16S rRNA showed that the isolates were related to P. aeruginosa species. The frequency of blaGIM-1, blaSIM-1, and blaSPM-1 was 52%, 48%, and 24%, respectively. BlaVIM and blaIMP-like genes were 20% and 4% and the sequences confirm the isolate to be blaVIM-1, blaVIM-2, blaVIM-4, and blaIMP-1. Three mutations were identified in blaVIM-4 gene. Our study emphasizes the high occurrence of multidrug-resistant P. aeruginosa-producing MBL enzymes. © 2017 APMIS. Published by John Wiley & Sons Ltd.

Assessing the clinical outcome of Vim radiosurgery with voxel-based morphometry: visual areas are linked with tremor arrest!

PubMed

Tuleasca, Constantin; Witjas, Tatiana; Najdenovska, Elena; Verger, Antoine; Girard, Nadine; Champoudry, Jerome; Thiran, Jean-Philippe; Van de Ville, Dimitri; Cuadra, Meritxell Bach; Levivier, Marc; Guedj, Eric; Régis, Jean

2017-11-01

Radiosurgery (RS) is an alternative to open standard stereotactic procedures (deep-brain stimulation or radiofrequency thalamotomy) for drug-resistant essential tremor (ET), aiming at the same target (ventro-intermediate nucleus, Vim). We investigated the Vim RS outcome using voxel-based morphometry by evaluating the interaction between clinical response and time. Thirty-eight patients with right-sided ET benefited from left unilateral Vim RS. Targeting was performed using 130 Gy and a single 4-mm collimator. Neurological and neuroimaging assessment was completed at baseline and 1 year. Clinical responders were considered those with at least 50% improvement in tremor score on the treated hand (TSTH). Interaction between clinical response and time showed the left temporal pole and occipital cortex (Brodmann area 19, including V4, V5 and the parahippocampal place area) as statistically significant. A decrease in gray matter density (GMD) 1 year after Vim RS correlated with higher TSTH improvement (Spearman = 0.01) for both anatomical areas. Higher baseline GMD within the left temporal pole correlated with better TSTH improvement (Spearman = 0.004). Statistically significant structural changes in the relationship to clinical response after Vim RS are present in remote areas, advocating a distant neurobiological effect. The former regions are mainly involved in locomotor monitoring toward the local and distant environment, suggesting the recruiting requirement in targeting of the specific visuomotor networks.

Effects of Casting Conditions on the Structure and Magnetic Properties of the Co-19 at.%Al-6 at. %W Alloy

NASA Astrophysics Data System (ADS)

Kazantseva, N. V.; Stepanova, N. N.; Rigmant, M. B.; Davidov, D. I.; Shishkin, D. A.; Romanov, E. P.

The Co-19 at.%Al-6 at.%W alloy was prepared by two methods of casting. We used arc melting under an argon atmosphere with casting into a copper water-cooled casting mold and induction melting furnace with casting into a ceramic Al2O3 mold. According to the X-ray and SEM analyses, phase compositions depend on the cooling rate of the ingot after melting. After arc melting, the cast alloy has a three-phase structure, consisting of γ cobalt (FCC), intermetallic phases CoAl (B2) type, and Co3W (DO19) type. After the induction melting, the alloy has a three-phase structure, consisting of γ cobalt (FCC), intermetallic phases CoAl (B2) type, and Co7W6 (µ) type. All phases in the investigated ternary alloy at the room temperature are ferromagnetic. Curie temperatures of all obtained phases were defined. It is shown that the magnetic properties of the studied alloy are typical for soft magnetic materials.

Analysis of laser-induction hybrid cladding processing conditions

NASA Astrophysics Data System (ADS)

Huang, Yongjun; Zeng, Xiaoyan; Hu, Qianwu

2007-12-01

A new cladding approach based on laser-induction hybrid technique on flat sheets is presented in this paper. Coating is produced by means of 5kw cw CO II laser equipped with 100kw high frequent inductor, and the experiments set-up, involving a special machining-head, which can provide laser-induction hybrid heat resources simultaneously. The formation of thick NiCrSiB coating on a steel substrate by off-axial powder feeding is studied from an experimental point of view. A substrate melting energy model is developed to describe the energy relationship between laser-induction hybrid cladding and laser cladding alone quantitatively. By comparing the experimental results with the calculational ones, it is shown that the tendency of fusion zone height of theoretical calculation is in agreement with that of tests in laser-induction hybrid cladding. Via analyses and tests, the conclusions can be lead to that the fusion zone height can be increased easily and the good bond of cladding track can be achieved within wide cladding processing window in laser-induction hybrid processing. It shows that the induction heating has an obvious effect on substrate melting and metallurgical bond.

Synthesis of Metallo-β-Lactamase VIM-2 Is Associated with a Fitness Reduction in Salmonella enterica Serovar Typhimurium

PubMed Central

Cordeiro, Nicolás F.; Chabalgoity, José A.; Yim, Lucía

2014-01-01

Antibiotic resistance, especially due to β-lactamases, has become one of the main obstacles in the correct treatment of Salmonella infections; furthermore, antibiotic resistance determines a gain of function that may encompass a biological cost, or fitness reduction, to the resistant bacteria. The aim of this work was to determine in vitro if the production of the class B β-lactamase VIM-2 determined a fitness cost for Salmonella enterica serovar Typhimurium. To that end the gene blaVIM-2 was cloned into the virulent strain S. Typhimurium SL1344, using both the tightly regulated pBAD22 vector and the natural plasmid pST12, for inducible and constitutive expression, respectively. Fitness studies were performed by means of motility, growth rate, invasiveness in epithelial cells, and plasmid stability. The expression of blaVIM-2 was accompanied by alterations in micro- and macroscopic morphology and reduced growth rate and motility, as well as diminished invasiveness in epithelial cells. These results suggest that VIM-2 production entails a substantial fitness cost for S. Typhimurium, which in turn may account for the extremely low number of reports of metallo-β-lactamase-producing Salmonella spp. PMID:25136026

40 CFR Table 1 to Subpart Zzzzz of... - Performance Test Requirements for New and Existing Affected Sources Classified as Large Foundries

Code of Federal Regulations, 2014 CFR

2014-07-01

.... . . According to the followingrequirements. . . 1. Each metal melting furnace subject to a PM or total metal HAP... metal HAP performance test. iv. For cupola metal melting furnaces, sample PM or total metal HAP only during times when the cupola is on blast. v. For electric arc and electric induction metal melting...

40 CFR Table 1 to Subpart Zzzzz of... - Performance Test Requirements for New and Existing Affected Sources Classified as Large Foundries

Code of Federal Regulations, 2013 CFR

2013-07-01

.... . . According to the followingrequirements. . . 1. Each metal melting furnace subject to a PM or total metal HAP... metal HAP performance test. iv. For cupola metal melting furnaces, sample PM or total metal HAP only during times when the cupola is on blast. v. For electric arc and electric induction metal melting...

40 CFR Table 1 to Subpart Zzzzz of... - Performance Test Requirements for New and Existing Affected Sources Classified as Large Foundries

Code of Federal Regulations, 2012 CFR

2012-07-01

.... . . According to the followingrequirements. . . 1. Each metal melting furnace subject to a PM or total metal HAP... metal HAP performance test. iv. For cupola metal melting furnaces, sample PM or total metal HAP only during times when the cupola is on blast. v. For electric arc and electric induction metal melting...

40 CFR Table 1 to Subpart Zzzzz of... - Performance Test Requirements for New and Existing Affected Sources Classified as Large Foundries

Code of Federal Regulations, 2010 CFR

2010-07-01

.... . . According to the followingrequirements. . . 1. Each metal melting furnace subject to a PM or total metal HAP... metal HAP performance test. iv. For cupola metal melting furnaces, sample PM or total metal HAP only during times when the cupola is on blast. v. For electric arc and electric induction metal melting...

40 CFR Table 1 to Subpart Zzzzz of... - Performance Test Requirements for New and Existing Affected Sources Classified as Large Foundries

Code of Federal Regulations, 2011 CFR

2011-07-01

.... . . According to the followingrequirements. . . 1. Each metal melting furnace subject to a PM or total metal HAP... metal HAP performance test. iv. For cupola metal melting furnaces, sample PM or total metal HAP only during times when the cupola is on blast. v. For electric arc and electric induction metal melting...

El uso de la neuromodulación para el tratamiento del temblor

PubMed Central

Bendersky, Damián; Ajler, Pablo; Yampolsky, Claudio

2014-01-01

Introducción: El temblor puede ser un desorden incapacitante y el tratamiento de primera línea para estos pacientes es farmacológico. Sin embargo, este tratamiento puede llevar a una reducción satisfactoria del temblor en sólo el 50% de los pacientes con temblor esencial. La talamotomía era el tratamiento de elección para el temblor refractario al tratamiento médico hasta que comenzó a utilizarse la estimulación cerebral profunda (ECP) del núcleo ventral intermedio (Vim) del tálamo. En la actualidad, raramente se realiza la talamotomía. Métodos: Este artículo es una revisión no sistemática de las indicaciones, resultados, parámetros de programación y técnica quirúrgica de la ECP del Vim para el tratamiento del temblor. Resultados: Aunque los resultados clínicos son similares usando la talamotomía o la ECP del Vim, la primera causa más efectos adversos que la última. Además, la ECP puede ser usada bilateralmente, mientras que la talamotomía tiene un alto riesgo de causar disartria cuando se realiza de ambos lados. La ECP del Vim logró una adecuada mejoría del temblor en varias series de pacientes con temblor causado por temblor esencial, enfermedad de Parkinson o esclerosis múltiple. Además del Vim, hay otros blancos que están siendo usados por varios autores, tales como la zona incerta y las radiaciones prelemniscales. Conclusión: La ECP del Vim es un tratamiento útil para el temblor incapacitante refractario al tratamiento médico. Es esencial realizar una precisa selección de pacientes, así como utilizar una técnica quirúrgica correcta. Aún se desconoce el mejor blanco estereotáctico para el temblor, aunque el Vim es el más usado. PMID:25165613

Emergence of VIM-4 metallo-β-lactamase-producing Klebsiella pneumoniae ST15 clone in the Clinical Centre University of Pécs, Hungary.

PubMed

Melegh, S; Kovács, K; Gám, T; Nyul, A; Patkó, B; Tóth, A; Damjanova, I; Mestyán, G

2014-01-01

Since November 2009 carbapenemase-producing Klebsiella pneumoniae isolates have been detected in increasing numbers at the Clinical Centre University of Pécs. Molecular typing was performed for 102 clinical isolates originating from different time periods and various departments of the Clinical Centre. Pulsed-field gel electrophoresis revealed the predominance of a single clone (101/102), identified as sequence type ST15. PCR and sequencing showed the presence of blaCTX-M-15 and blaVIM-4 genes. The blaVIM-4 was located on a class 1 integron designated In238b. To our knowledge, this is the first description of a blaVIM-4 gene in the predominant CTX-M-15 extended spectrum β-lactamase-producing Hungarian Epidemic Clone/ST15. © 2013 The Authors Clinical Microbiology and Infection © 2013 European Society of Clinical Microbiology and Infectious Diseases.

Antimicrobial Resistance Pattern and Their Beta-Lactamase Encoding Genes among Pseudomonas aeruginosa Strains Isolated from Cancer Patients

PubMed Central

Zafer, Mai M.; Al-Agamy, Mohamed H.; El-Mahallawy, Hadir A.; Amin, Magdy A.; Ashour, Mohammed Seif El-Din

2014-01-01

This study was designed to investigate the prevalence of metallo-β-lactamases (MBL) and extended-spectrum β-lactamases (ESBL) in P. aeruginosa isolates collected from two different hospitals in Cairo, Egypt. Antibiotic susceptibility testing and phenotypic screening for ESBLs and MBLs were performed on 122 P. aeruginosa isolates collected in the period from January 2011 to March 2012. MICs were determined. ESBLs and MBLs genes were sought by PCR. The resistant rate to imipenem was 39.34%. The resistance rates for P. aeruginosa to cefuroxime, cefoperazone, ceftazidime, aztreonam, and piperacillin/tazobactam were 87.7%, 80.3%, 60.6%, 45.1%, and 25.4%, respectively. Out of 122 P. aeruginosa, 27% and 7.4% were MBL and ESBL, respectively. The prevalence of bla VIM-2, bla OXA-10-, bla VEB-1, bla NDM-, and bla IMP-1-like genes were found in 58.3%, 41.7%, 10.4%, 4.2%, and 2.1%, respectively. GIM-, SPM-, SIM-, and OXA-2-like genes were not detected in this study. OXA-10-like gene was concomitant with VIM-2 and/or VEB. Twelve isolates harbored both OXA-10 and VIM-2; two isolates carried both OXA-10 and VEB. Only one strain contained OXA-10, VIM-2, and VEB. In conclusion, bla VIM-2- and bla OXA-10-like genes were the most prevalent genes in P. aeruginosa in Egypt. To our knowledge, this is the first report of bla VIM-2, bla IMP-1, bla NDM, and bla OXA-10 in P. aeruginosa in Egypt. PMID:24707471

Deep brain stimulation in uncommon tremor disorders: indications, targets, and programming.

PubMed

Artusi, Carlo Alberto; Farooqi, Ashar; Romagnolo, Alberto; Marsili, Luca; Balestrino, Roberta; Sokol, Leonard L; Wang, Lily L; Zibetti, Maurizio; Duker, Andrew P; Mandybur, George T; Lopiano, Leonardo; Merola, Aristide

2018-03-06

In uncommon tremor disorders, clinical efficacy and optimal anatomical targets for deep brain stimulation (DBS) remain inadequately studied and insufficiently quantified. We performed a systematic review of PubMed.gov and ClinicalTrials.gov. Relevant articles were identified using the following keywords: "tremor", "Holmes tremor", "orthostatic tremor", "multiple sclerosis", "multiple sclerosis tremor", "neuropathy", "neuropathic tremor", "fragile X-associated tremor/ataxia syndrome", and "fragile X." We identified a total of 263 cases treated with DBS for uncommon tremor disorders. Of these, 44 had Holmes tremor (HT), 18 orthostatic tremor (OT), 177 multiple sclerosis (MS)-associated tremor, 14 neuropathy-associated tremor, and 10 fragile X-associated tremor/ataxia syndrome (FXTAS). DBS resulted in favorable, albeit partial, clinical improvements in HT cases receiving Vim-DBS alone or in combination with additional targets. A sustained improvement was reported in OT cases treated with bilateral Vim-DBS, while the two cases treated with unilateral Vim-DBS demonstrated only a transient effect. MS-associated tremor responded to dual-target Vim-/VO-DBS, but the inability to account for the progression of MS-associated disability impeded the assessment of its long-term clinical efficacy. Neuropathy-associated tremor substantially improved with Vim-DBS. In FXTAS patients, while Vim-DBS was effective in improving tremor, equivocal results were observed in those with ataxia. DBS of select targets may represent an effective therapeutic strategy for uncommon tremor disorders, although the level of evidence is currently in its incipient form and based on single cases or limited case series. An international registry is, therefore, warranted to clarify selection criteria, long-term results, and optimal surgical targets.

Influence of Crucible Materials on High-temperature Properties of Vacuum-melted Nickel-chromium-cobalt Alloy

NASA Technical Reports Server (NTRS)

Decker, R F; Rowe, John P; Freeman, J W

1957-01-01

A study of the effect of induction-vacuum-melting procedure on the high-temperature properties of a titanium-and-aluminum-hardened nickel-base alloy revealed that a major variable was the type of ceramic used as a crucible. Reactions between the melt and magnesia or zirconia crucibles apparently increased high-temperature properties by introducing small amounts of boron or zirconium into the melts. Heats melted in alumina crucibles had relatively low rupture life and ductility at 1,600 F and cracked during hot-working as a result of deriving no boron or zirconium from the crucible.

Inductance Jump at Melting of Vortex Lattice in Untwinned YBaCuO

NASA Astrophysics Data System (ADS)

Matl, P.; Wu, H.; Ong, N. P.; Gagnon, R.; Taillefer, L.

1997-03-01

We have measured the complex resistivity in an untwinned single crystal YBaCuO between 70K and 120K at a fixed magnetic field. As T increases towards the melting temperature Tm the inductance increases rapidly. At Tm the inductance undergoes a discontinuous jump, which we correlate with the collapse of the shear modulus c_66. We describe how the magnitude of the jump varies with temperature, field, and frequency. We have also extracted the viscosity of the vortex lattice from a Bardeen-Stephen fit to the low field complex resistivity measured at 1 to 15 MHz between 80K and T_c. We find that the viscosity decreases as 1.2x10-13 kg m-1 s-1 K-1 as the temperature approaches T_c.

Effect of electric arc, gas oxygen torch and induction melting techniques on the marginal accuracy of cast base-metal and noble metal-ceramic crowns.

PubMed

Gómez-Cogolludo, Pablo; Castillo-Oyagüe, Raquel; Lynch, Christopher D; Suárez-García, María-Jesús

2013-09-01

The aim of this study was to identify the most appropriate alloy composition and melting technique by evaluating the marginal accuracy of cast metal-ceramic crowns. Seventy standardised stainless-steel abutments were prepared to receive metal-ceramic crowns and were randomly divided into four alloy groups: Group 1: palladium-gold (Pd-Au), Group 2: nickel-chromium-titanium (Ni-Cr-Ti), Group 3: nickel-chromium (Ni-Cr) and Group 4: titanium (Ti). Groups 1, 2 and 3 were in turn subdivided to be melted and cast using: (a) gas oxygen torch and centrifugal casting machine (TC) or (b) induction and centrifugal casting machine (IC). Group 4 was melted and cast using electric arc and vacuum/pressure machine (EV). All of the metal-ceramic crowns were luted with glass-ionomer cement. The marginal fit was measured under an optical microscope before and after cementation using image analysis software. All data was subjected to two-way analysis of variance (ANOVA). Duncan's multiple range test was run for post-hoc comparisons. The Student's t-test was used to investigate the influence of cementation (α=0.05). Uncemented Pd-Au/TC samples achieved the best marginal adaptation, while the worst fit corresponded to the luted Ti/EV crowns. Pd-Au/TC, Ni-Cr and Ti restorations demonstrated significantly increased misfit after cementation. The Ni-Cr-Ti alloy was the most predictable in terms of differences in misfit when either torch or induction was applied before or after cementation. Cemented titanium crowns exceeded the clinically acceptable limit of 120μm. The combination of alloy composition, melting technique, casting method and luting process influences the vertical seal of cast metal-ceramic crowns. An accurate use of the gas oxygen torch may overcome the results attained with the induction system concerning the marginal adaptation of fixed dental prostheses. Copyright © 2013 Elsevier Ltd. All rights reserved.

Influence of Processing on the Microstructure and Mechanical Properties of a NbAl3-Base Alloy

NASA Technical Reports Server (NTRS)

Hebsur, Mohan G.; Locci, Ivan E.; Raj, S. V.; Nathal, Michael V.

1992-01-01

Induction melting and rapid solidification processing, followed by grinding to 75-micron powder and P/M consolidation, have been used to produce a multiphase, NbAl3-based, oxidation-resistant alloy of Nb-67Al-7Cr-0.5Y-0.25W composition whose strength and ductility are significantly higher than those of the induction-melted alloy at test temperatures of up to 1200 K. Attention is given to the beneficial role of microstructural refinement; the major second phase, AlNbCr, improves both oxidation resistance and mechanical properties.

Developing Breast Cancer Program at Xavier; Genomic and Proteomic Analysis of Signaling Pathways Involved in Xenohormone and MEK5 Regulation of Breast Cancer

DTIC Science & Technology

2010-05-01

Heat shock 70 kDa protein 4 (HSPA4), Glutathione S-transferase P ( GSTP1 ), and Creatine kinase B-type (CKB), and downregulations of Keratin 8 (KRT8...VIM), glutathione-S-transferase P ( GSTP1 ), and creatine kinase B-type (CKB) were upregulated, and keratin 8 (KRT8), keratin 19 (KRT19) and...upregulation of VIM/vim, GSTP1 / gstp1 , and CKB/ckb; and downregulation of KRT8/krt8, KRT19/krt19, and GSTM3/gstm3). We further demonstrate that MEK5

The geology of Hotei Regio, Titan: Correlation of Cassini VIMS and RADAR

USGS Publications Warehouse

Soderblom, L.A.; Brown, R.H.; Soderblom, J.M.; Barnes, J.W.; Kirk, R.L.; Sotin, Christophe; Jaumann, R.; MacKinnon, D.J.; Mackowski, D.W.; Baines, K.H.; Buratti, B.J.; Clark, R.N.; Nicholson, P.D.

2009-01-01

Joint Cassini VIMS and RADAR SAR data of ???700-km-wide Hotei Regio reveal a rich collection of geological features that correlate between the two sets of images. The degree of correlation is greater than anywhere else seen on Titan. Central to Hotei Regio is a basin filled with cryovolcanic flows that are anomalously bright in VIMS data (in particular at 5 ??m) and quite variable in roughness in SAR. The edges of the flows are dark in SAR data and appear to overrun a VIMS-bright substrate. SAR-stereo topography shows the flows to be viscous, 100-200 m thick. On its southern edge the basin is ringed by higher (???1 km) mountainous terrain. The mountains show mixed texture in SAR data: some regions are extremely rough, exhibit low and spectrally neutral albedo in VIMS data and may be partly coated with darker hydrocarbons. Around the southern margin of Hotei Regio, the SAR image shows several large, dendritic, radar-bright channels that flow down from the mountainous terrain and terminate in dark blue patches, seen in VIMS images, whose infrared color is consistent with enrichment in water ice. The patches are in depressions that we interpret to be filled with fluvial deposits eroded and transported by liquid methane in the channels. In the VIMS images the dark blue patches are encased in a latticework of lighter bands that we suggest to demark a set of circumferential and radial fault systems bounding structural depressions. Conceivably the circular features are tectonic structures that are remnant from an ancient impact structure. We suggest that impact-generated structures may have simply served as zones of weakness; no direct causal connection, such as impact-induced volcanism, is implied. We also speculate that two large dark features lying on the northern margin of Hotei Regio could be calderas. In summary the preservation of such a broad suite of VIMS infrared color variations and the detailed correlation with features in the SAR image and SAR topography evidence a complex set of geological processes (pluvial, fluvial, tectonic, cryovolcanic, impact) that have likely remained active up to very recent geological time (<104 year). That the cryovolcanic flows are excessively bright in the infrared, particularly at 5 ??m, might signal ongoing geological activity. One study [Nelson, R.M., and 28 colleagues, 2009. Icarus 199, 429-441] reported significant 2-??m albedo changes in VIMS data for Hotei Arcus acquired between 2004 and 2006, that were interpreted as evidence for such activity. However in our review of that work, we do not agree that such evidence has yet been found.

Primary melt and fluid inclusions in regenerated crystals and phenocrysts of olivine from kimberlites of the Udachnaya-East Pipe, Yakutia: The problem of the kimberlite melt

NASA Astrophysics Data System (ADS)

Tomilenko, A. A.; Kuzmin, D. V.; Bul'bak, T. A.; Sobolev, N. V.

2017-08-01

The primary melt and fluid inclusions in regenerated zonal crystals of olivine and homogeneous phenocrysts of olivine from kimberlites of the Udachnaya-East pipe, were first studied by means of microthermometry, optic and scanning electron microscopy, electron and ion microprobe analysis (SIMS), inductively coupled plasma mass-spectrometry (ICP MSC), and Raman spectroscopy. It was established that olivine crystals were regenerated from silicate-carbonate melts at a temperature of 1100°C.

Ti-Based Metal Matrix Composites Reinforced with TiB Particles

DTIC Science & Technology

2006-05-16

layer near the water-cooled crucible wall. Such microstructure gradient was observed in samples cooled in copper crucible 6 mm in diameter. III...melting and characterization of Scale 2 ingots. The Scale 2 ingots were melted in induction furnace inside a water-cooled sectioned copper crucible . As

Molecular detection of metallo-β-lactamase gene blaVIM-1 in imipenem-resistant Pseudomonas aeruginosa strains isolated from hospitalized patients in the hospitals of Isfahan.

PubMed

Sedighi, Mansour; Vaez, Hamid; Moghoofeie, Mohsen; Hadifar, Shima; Oryan, Golfam; Faghri, Jamshid

2015-01-01

Pseudomonas aeruginosa is an opportunistic human pathogen that causes serious problems, especially in people, who have immunodeficiency. In recent times, metallo-β-lactamase (MBLs) resistance in this bacterium has led to some difficulties in treating bacterial infections. The metallo-beta-lactamase family of genes, including blaVIM-1, is being reported with increasing frequency worldwide. The aim of this study is the detection of the metallo-β-lactamase gene blaVIM-1 in imipenem-resistant P. aeruginosa (IRPA) strains isolated from hospitalized patients. In this study, 106 P. aeruginosa samples were isolated from various nosocomial infections. The isolates were identified, tested for susceptibility to various antimicrobial agents by the Kirby-Bauer disk diffusion method, and all the imipenem-resistant isolates were screened for the presence of MBLs by using the combined disk (IMP-EDTA). The minimal inhibitory concentration (MIC) of imipenem was determined by E-test on the Mueller-Hinton agar. To detect the blaVIM-1 gene, the isolates were subjected to a polymerase chain reaction (PCR). Of all the P. aeruginosa isolates, 62 (58.5%) were found to be imipenem-resistant P. aeruginosa (MIC ≥32 μg/ml). Twenty-six (42%) of the imipenem-resistant isolates were MBL positive. None of these isolates carried the blaVIM-1 gene using the PCR assay. The results demonstrated the serious therapeutic threat of the MBL-producing P. aeruginosa populations. The rate of imipenem resistance due to MBL was increased dramatically. Early detection and infection-control practices are the best antimicrobial strategies for this organism. None of MBL-producing isolates in this study carry the blaVIM-1 gene; therefore, another gene in the MBL family should be investigated.

Comparative immunohistochemical characterization of interstitial cells in the urinary bladder of human, guinea pig and pig.

PubMed

Steiner, Clara; Gevaert, Thomas; Ganzer, Roman; De Ridder, Dirk; Neuhaus, Jochen

2018-05-01

Interstitial cells (ICs) are thought to play a functional role in urinary bladder. Animal models are commonly used to elucidate bladder physiology and pathophysiology. However, inter-species comparative studies on ICs are rare. We therefore analyzed ICs and their distribution in the upper lamina propria (ULP), the deeper lamina propria (DLP) and the detrusor muscular layer (DET) of human, guinea pig (GP) and pig. Paraffin slices were examined by immunohistochemistry and 3D confocal immunofluorescence of the mesenchymal intermediate filament vimentin (VIM), alpha-smooth muscle actin (αSMA), platelet-derived growth factor receptor alpha (PDGFRα) and transient receptor potential cation channel A1 (TRPA1). Image stacks were processed for analysis using Huygens software; quantitative analysis was performed with Fiji macros. ICs were identified by immunoreactivity for VIM (excluding blood vessels). In all species ≥ 75% of ULP ICs were VIM + /PDGFRα + and ≥ 90% were VIM + /TRPA1 + . In human and pig ≥ 74% of ULP ICs were VIM + /αSMA + , while in GP the percentage differed significantly with only 37% VIM + /αSMA + ICs. Additionally, over 90% of αSMA + ICs were also TRPA1 + and PDGFRα + in human, GP and pig. In all three species, TRPA1 + and PDGFRα + ICs point to an active role for these cells in bladder physiology, regarding afferent signaling processes and signal modification. We hypothesize that decline in αSMA-positivity in GP reflects adaptation of bladder histology to smaller bladder size. In our experiments, pig bladder proved to be highly comparable to human urinary bladder and seems to provide safer interpretation of experimental findings than GP.

Cold-Worked Inconel(R) 718 Bars

NASA Technical Reports Server (NTRS)

Montano, J. W.

1988-01-01

Cold working and double aging yield high strength without sacrifice of resistance to corrosion. Report presents data on mechanical properties and stress-corrosion resistance of triple-melted, solution-treated, work-strengthened, direct-double-aged Inconel(R) 718 alloy. Triple melting consists of vacuum induction melting, electro-slag remelting, and vacuum arm remelting. Data indicate advance in processing of large-diameter bars. New process increases yield strength without reducing the elongation, reduction of area, and grain size.

USSR Report, Electronics and Electrical Engineering, No. 104

DTIC Science & Technology

1983-06-13

shaping of silicon crystals during their growth is a modification of inductive contactless forming of rods and tubes directly from the melt on a...MANUFACTURING TECHNOLOGY Induction Systems for Electromagnetic Shaping of Silicon Crystal During.Growth (L. R. Lev; ELEKTROTEKHNIKA, Feb 83) • • • x...et al.; IZVESTIYA VYSSHIKH UCHEBNYKH ZAVEDENIY: ELEKTROMEKHANIKA, Dec 82) 18 Basic Design of Linear- Induction Traction Motors for High-Speed

Coherent Backscattering Effect in Saturnian vs. Uranian Satellites: Observations and Enhanced MSTM Modeling

NASA Astrophysics Data System (ADS)

Pitman, Karly M.; Kolokolova, Ludmilla; Verbiscer, Anne J.; Joseph, Emily C.; Mackowski, Daniel W.; Buratti, Bonnie J.; Momary, Thomas W.

2014-11-01

We continue our campaign to extract spectra and measure absorption band parameters from Cassini Visual & Infrared Mapping Spectrometer (VIMS) and ground-based near-infrared observations of saturnian and uranian icy satellites. We compare these spectra to numerical models to study the coherent backscattering effect (CBE; constructive interference of radiation) that should significantly alter the interpretation of spacecraft spectra obtained at solar phase angles α < 2 degrees. To quantify CBE, we extract VIMS spectra for different α from the same location on the icy satellite surface, ideally within +/- 1-2 degrees in subspacecraft latitude and longitude. Using 2013-2014 calibration updates for VIMS, we present groups of VIMS spectra (pairs or trios) for 3 saturnian moons that most closely fit these ideal criteria. We also show models of the light-scattering characteristics of icy surfaces using a new version of the Multiple Sphere T-Matrix (MSTM) code (Mackowski, D., 2014, in Proceedings of the Workshop “Scattering by aggregates (on surfaces)”, Bremen, Germany, 24 - 25. March 2014, p. 6-9). This code, called MSTM4, allows users to build large, thick slabs of dozens of thousands of spheres to model planetary regolith more accurately. The results clearly indicate the influence of CBE on the spectra and show significant dependence on the size of particles and their packing. To extend the low phase angle coverage of Cassini VIMS data and examine CBE on darker surfaces, we also compare to spectra of several uranian satellites (Titania, Oberon Ariel) acquired using Triplespec ( 3500) at Apache Point Observatory, New Mexico. Synthesizing such results will ultimately place limits on the size and packing fraction of icy satellite regolith particles and aid in interpretations of the structure, composition, and evolution of icy satellites.This work is supported by NASA’s Outer Planets Research program (NNX12AM76G; PI Pitman), Planetary Astronomy program (NNX09AD06G; PI Verbiscer), and NASA’s Advanced Supercomputing Division. Calibrated Cassini VIMS data cubes appear courtesy of the Cassini VIMS team and the PDS.

Outbreak of Carbapenem-Resistant Pseudomonas aeruginosa Producing VIM-8, a Novel Metallo-β-Lactamase, in a Tertiary Care Center in Cali, Colombia

PubMed Central

Crespo, M. P.; Woodford, N.; Sinclair, A.; Kaufmann, M. E.; Turton, J; Glover, J.; Velez, J. D.; Castañeda, C. R.; Recalde, M.; Livermore, D. M.

2004-01-01

The prevalence of imipenem resistance among Pseudomonas aeruginosa isolates at a 195-bed tertiary care medical center in Cali, Colombia, rose from 2% in 1996 to 28% in 1997 and to over 40% in 2003. Many isolates showed high-level multiresistance, and phenotypic characterization suggested the spread of a predominant strain with minor variants. Sixty-six resistant isolates collected between February 1999 and July 2003 from hospitalized patients (n = 54) and environmental samples (n = 12) were subjected to a fuller analysis. Genetic fingerprints were compared by pulsed-field gel electrophoresis (PFGE) of SpeI-digested genomic DNA, and blaIMP and blaVIM genes were sought by PCR. PFGE and serotyping indicated that 52 of the 66 isolates belonged to a single strain, with 82% similarity; the PFGE pattern for this organism was designated pattern A. Two further pairs of isolates represented single strains; the remaining nine isolates were unique, and in the case of one isolate, no satisfactory PFGE profile could be obtained. The pattern A isolates were mostly of serotype O12 and were highly resistant to imipenem (MICs, 32 to >256 μg/ml), with this resistance decreased eightfold or more in the presence of EDTA. They yielded amplicons with blaVIM-specific primers, and sequencing of DNA from a representative isolate revealed blaVIM-8, a novel allele with three polymorphisms compared with the sequence of blaVIM-2. Two of these nucleotide changes were silent, but the third determined a Thr139Ala substitution. Only 4 of 13 resistant isolates (2 clinical isolates and 2 environmental isolates) assigned to other PFGE types carried blaVIM alleles, whereas the others were less multiresistant and mostly had lower levels of imipenem resistance (MICs, ≤32 μg/ml) which was not significantly reduced by EDTA. No blaIMP alleles were detected. During 2003, when the environmental study was undertaken, serotype O12 isolates with blaVIM were recovered from sinks and stethoscopes in the most-affected units, although not from the hands of staff; the problem declined once these reservoirs were disinfected and hygienic precautions were reinforced. PMID:15528701

A prospective examination of circulating tumor cell profiles in non-small-cell lung cancer molecular subgroups.

PubMed

Lindsay, C R; Faugeroux, V; Michiels, S; Pailler, E; Facchinetti, F; Ou, D; Bluthgen, M V; Pannet, C; Ngo-Camus, M; Bescher, G; Caramella, C; Billiot, F; Remon, J; Planchard, D; Soria, J-C; Besse, B; Farace, F

2017-07-01

We report the first study examining the clinical, numerical and biological properties of circulating tumor cells according to molecular subtypes of non-small-cell lung cancer. 125 patients with treatment-naïve stage IIIb-IV NSCLC were prospectively recruited for CellSearch analysis. Anti-vimentin antibody was included for examination of CTCs to assess their mesenchymal character. Associations of total CTCs and vimentin-positive (vim +) CTCs with clinical characteristics, tumor genotype, and survival were assessed. 51/125 patients (40.8%) were total CTC+ and 26/125 (20.8%) were vim CTC+ at baseline. Multivariate analysis showed patients with ≥5 total CTCs had significantly reduced OS (HR 0.55, 95% CI 0.33-0.92, P = 0.022) but not PFS (HR 0.68, 95% CI 0.42-1.1, P = 0.118) compared to patients with <5 total CTCs. No OS difference was evident between vim+ CTC and vim-negative CTC patients overall (HR 1.24, 95% CI 0.67-2.28, P = 0.494), but after subdivision according to NSCLC driver mutation, we found an increase of vim+ CTCs in the EGFR-mutated subgroup (N = 21/94 patients; mean 1.24 vs 1.22 vim+ CTCs, P = 0.013), a reduction of total CTCs in the ALK-rearranged subgroup (N = 13/90 patients; mean 1.69 vs 5.82 total CTCs, P = 0.029), and a total absence of vim+ CTCs in KRAS-mutated adenocarcinomas (N = 19/78 patients; mean 0 vs 1.4 vim+ CTCs, P = 0.006). We validate that the baseline presence of ≥5 total CTCs in advanced NSCLC confers a poor prognosis. CTCs from EGFR-mutant NSCLC express epithelial-mesenchymal transition characteristics, not seen in CTCs from patients with KRAS-mutant adenocarcinoma. © The Author 2017. Published by Oxford University Press on behalf of the European Society for Medical Oncology. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Compositional Variations of Titan's Impact Craters Indicates Active Surface Erosion

NASA Astrophysics Data System (ADS)

Werynski, Alyssa; Neish, Catherine; Le Gall, Alice; Janssen, Michael A.

2017-10-01

Titan’s crust is assumed to be mostly water-ice. However, the surface composition is not well constrained due to its thick atmosphere. Based on infrared and radiometry data, the surface appears enriched in organics, with only few areas showing evidence of exposed water-ice. Regions of water-ice enrichment include the rims and ejecta blankets of impact craters. This study utilizes these geologic features to examine compositional variations across Titan’s surface, and their subsequent modification due to erosional processes.Sixteen craters and their ejecta blankets were mapped on a Cassini RADAR mosaic. These features were selected because they are some of the best preserved craters on Titan. Composition was inferred from Cassini’s Visual and Infrared Mapping Spectrometer (VIMS) and 2-cm emissivity data from the Cassini radiometer. With VIMS, different compositional units were inferred from their reflectivity at specific wavelengths. With the emissivity data, high values suggest more organic-rich material, while lower values indicate strong volume scattering. Areas with low emissivity have been interpreted to be water-ice rich, as water-ice is a favorable medium for volume scattering.Results show fresher, well-preserved craters in the dunes regions have a low emissivity indicative of water-ice, and a VIMS spectrum consistent with an unknown material, possibly a mixture of water-ice and organics. As these craters erode over time, the VIMS spectra remain the same but the emissivity increases. Well-preserved craters in the mid-latitude plains show VIMS spectra and emissivity values consistent with water-ice. As these plain craters degrade, the VIMS spectra remain the same, but the emissivity increases. The differing VIMS signatures suggest more mixing with organics during the cratering event in the organic-rich dunes than the plains. The changes in emissivity over time are consistent with organic infilling of subsurface fractures in both regions, with limited surficial alteration. These results support the idea that compositional variations in Titan’s impact craters are related primarily to erosion and infilling, and to a lesser extent, local variations in the overlying organic material of the pre-impact substrate.

Vection and visually induced motion sickness: how are they related?

PubMed Central

Keshavarz, Behrang; Riecke, Bernhard E.; Hettinger, Lawrence J.; Campos, Jennifer L.

2015-01-01

The occurrence of visually induced motion sickness has been frequently linked to the sensation of illusory self-motion (vection), however, the precise nature of this relationship is still not fully understood. To date, it is still a matter of debate as to whether vection is a necessary prerequisite for visually induced motion sickness (VIMS). That is, can there be VIMS without any sensation of self-motion? In this paper, we will describe the possible nature of this relationship, review the literature that addresses this relationship (including theoretical accounts of vection and VIMS), and offer suggestions with respect to operationally defining and reporting these phenomena in future. PMID:25941509

Sequence of pNL194, a 79.3-Kilobase IncN Plasmid Carrying the blaVIM-1 Metallo-β-Lactamase Gene in Klebsiella pneumoniae▿

PubMed Central

Miriagou, V.; Papagiannitsis, C. C.; Kotsakis, S. D.; Loli, A.; Tzelepi, E.; Legakis, N. J.; Tzouvelekis, L. S.

2010-01-01

The nucleotide sequence of pNL194, a VIM-1-encoding plasmid, is described in this study. pNL194 (79,307 bp) comprised an IncN-characteristic segment (38,940 bp) and a mosaic structure (40,367 bp) including blaVIM-1, aacA7, aadA1, aadA2, dfrA1, dfrA12, aphA1, strA, strB, and sul1. Tn1000 or Tn5501 insertion within fipA probably facilitated recruitment of additional mobile elements carrying resistance genes. PMID:20660690

Investigation of Titan's surface and atmosphere photometric functions using the Cassini/VIMS instrument

NASA Astrophysics Data System (ADS)

Cornet, Thomas; Altobelli, Nicolas; Rodriguez, Sébastien; Maltagliati, Luca; Le Mouélic, Stéphane; Sotin, Christophe; Brown, Robert; Barnes, Jason; Buratti, Bonnie; Baines, Kevin; Clark, Roger; Nicholson, Phillip

2015-04-01

After 106 flybys spread over 10 years, the Cassini Visual and Infrared Mapping Spectrometer (VIMS) instrument acquired 33151 hyperspectral cubes pointing at the surface of Titan on the dayside. Despite this huge amount of data available for surface studies, and due to the strong influence of the atmosphere (methane absorption and haze scattering), Titan's surface is only visible with VIMS in 7 spectral atmospheric windows centred at 0.93, 1.08, 1.27, 1.59, 2.01, 2.7-2.8 and 5 microns. Atmospheric scattering and absorption effects dominate Titan's spectrum at wavelengths shorter than 3 microns, while the 5 micron window, almost insensitive to the haze scattering, only presents a reduced atmospheric absorption contribution to the signal recorded by VIMS. In all cases, the recorded I/F represents an apparent albedo, which depends on the atmospheric contributions and the surface photometry at each wavelength. We therefore aim to determine real albedo values for Titan's surface by finding photometric functions for the surface and the atmosphere that could be used as a basis for empirical corrections or Radiative Transfer calculations. After updating the navigation of the VIMS archive, we decomposed the entire VIMS data set into a MySQL relational database gathering the viewing geometry, location, time (season) and I/F (for pure atmosphere and surface-atmosphere images) for each pixel of the 33151 individual VIMS cubes. We then isolated all the VIMS pixels where Titan's surface has been repeatedly imaged at low phase angles (< 20 degrees) in order to characterize phase curves for the surface at 5 microns and for the atmosphere. Among these, the T88 flyby appears noteworthy, with a "Emergence-Phase Function (EPF)"-type observation: 25 cubes acquired during the same flyby, over the same area (close to Tortola Facula, in relatively dark terrains), at a constant incidence and with varying emergence and phase (from 0 to 60 degrees) angles. The data clearly exhibit an increase of I/F at 5 microns at very low phase angles, which is indicative of an opposition effect for the surface, and kinks in the I/F at low and high emergence/phase angles, increasing with decreasing wavelength (and thus with increasing atmospheric scattering). The latter dependency is present in both pure atmosphere and surface-atmosphere images, which clearly indicates that it is of atmospheric origin. We are currently investigating these dependencies with angles and try to determine best fit models that would describe the phase curves for the surface at 5 microns and for the atmosphere at lower wavelengths in this particular area.

High-resolution CASSINI-VIMS mosaics of Titan and the icy Saturnian satellites

USGS Publications Warehouse

Jaumann, R.; Stephan, K.; Brown, R.H.; Buratti, B.J.; Clark, R.N.; McCord, T.B.; Coradini, A.; Capaccioni, F.; Filacchione, G.; Cerroni, P.; Baines, K.H.; Bellucci, G.; Bibring, J.-P.; Combes, M.; Cruikshank, D.P.; Drossart, P.; Formisano, V.; Langevin, Y.; Matson, D.L.; Nelson, R.M.; Nicholson, P.D.; Sicardy, B.; Sotin, Christophe; Soderbloom, L.A.; Griffith, C.; Matz, K.-D.; Roatsch, Th.; Scholten, F.; Porco, C.C.

2006-01-01

The Visual Infrared Mapping Spectrometer (VIMS) onboard the CASSINI spacecraft obtained new spectral data of the icy satellites of Saturn after its arrival at Saturn in June 2004. VIMS operates in a spectral range from 0.35 to 5.2 ??m, generating image cubes in which each pixel represents a spectrum consisting of 352 contiguous wavebands. As an imaging spectrometer VIMS combines the characteristics of both a spectrometer and an imaging instrument. This makes it possible to analyze the spectrum of each pixel separately and to map the spectral characteristics spatially, which is important to study the relationships between spectral information and geological and geomorphologic surface features. The spatial analysis of the spectral data requires the determination of the exact geographic position of each pixel on the specific surface and that all 352 spectral elements of each pixel show the same region of the target. We developed a method to reproject each pixel geometrically and to convert the spectral data into map projected image cubes. This method can also be applied to mosaic different VIMS observations. Based on these mosaics, maps of the spectral properties for each Saturnian satellite can be derived and attributed to geographic positions as well as to geological and geomorphologic surface features. These map-projected mosaics are the basis for all further investigations. ?? 2006 Elsevier Ltd. All rights reserved.

Reduction of renal mass is lethal in mice lacking vimentin. Role of endothelin-nitric oxide imbalance.

PubMed Central

Terzi, F; Henrion, D; Colucci-Guyon, E; Federici, P; Babinet, C; Levy, B I; Briand, P; Friedlander, G

1997-01-01

Modulation of vascular tone by chemical and mechanical stimuli is a crucial adaptive phenomenon which involves cytoskeleton elements. Disruption, by homologous recombination, of the gene encoding vimentin, a class III intermediate filament protein mainly expressed in vascular cells, was reported to result in apparently normal phenotype under physiological conditions. In this study, we evaluated whether the lack of vimentin affects vascular adaptation to pathological situations, such as reduction of renal mass, a pathological condition which usually results in immediate and sustained vasodilation of the renal vascular bed. Ablation of 3/4 of renal mass was constantly lethal within 72 h in mice lacking vimentin (Vim-/-), whereas no lethality was observed in wild-type littermates. Death in Vim-/- mice resulted from end-stage renal failure. Kidneys from Vim-/- mice synthesized more endothelin, but less nitric oxide (NO), than kidneys from normal animals. In vitro, renal resistance arteries from Vim-/- mice were selectively more sensitive to endothelin, less responsive to NO-dependent vasodilators, and exhibited an impaired flow (shear stress)- induced vasodilation, which is NO dependent, as compared with those from normal littermates. Finally, in vivo administration of bosentan, an endothelin receptor antagonist, totally prevented lethality in Vim-/- mice. These results suggest that vimentin plays a key role in the modulation of vascular tone, possibly via the tuning of endothelin-nitric oxide balance. PMID:9294120

Carbapenemase-producing Klebsiella pneumoniae in the Czech Republic in 2011.

PubMed

Hrabák, J; Papagiannitsis, C C; Študentová, V; Jakubu, V; Fridrichová, M; Zemlickova, H

2013-11-07

Carbapenemase-producing Enterobacteriaceae and Pseudomonas spp. are increasingly reported in many countries all over the world. Due to the resistance of those bacteria to almost all antibiotics (e.g.beta-lactams, aminoglycosides, fluoroquinolones),treatment options are seriously limited. In the Czech Republic, the incidence of carbapenemase-producing Enterobacteriaceae seems to be low, restricted to only three cases detected between 2009 and 2010.Here, we describe molecular typing of 15 carbapenemase-producing Klebsiella pneumoniae isolates identified in the Czech Republic during 2011. Five VIM-1-producing isolates belonging to sequence type (ST)11 and one VIM-4-producing isolate of ST1029 have been detected. blaVIM-1 and blaVIM-4 as a part of class 1 integrons were chromosomally located or carried by a plasmid belonging to A/C replicon type (blaVIM-4). KPC-3-producing isolates of ST512, recovered from six patients, caused an outbreak. Three more isolates producing KPC-2 enzyme belonged to ST258. Both blaKPCgenes were part of the Tn4401a transposon carried on plasmids of the pKpQIL type. The isolates were resistant to all antibiotics tested except colistin and/or gentamicin.Four of these 15 strains were recovered from patients repatriated to the Czech Republic from Greece and Italy. This is the first report of outbreaks caused by carbapenemase-producing Enterobacteriaceae in the Czech Republic.

Influence of melting and casting methods and finish line design on the marginal discrepancy of nickel-chromium-titanium alloy crowns.

PubMed

Cogolludo, Pablo G; Suarez, María J; Peláez, Jesús; Lozano, José F L

2010-01-01

The aim of this study was to analyze the influence of melting and casting procedures and the cervical finish line design on the marginal fit of nickel-chromium-titanium alloy crowns. Sixty standardized specimens were prepared to receive metal-ceramic crowns and were divided into two groups according to the cervical finish line: chamfer or rounded shoulder. Three melting and casting procedures were analyzed: (1) induction-centrifuge (IC), (2) gas oxygen torch-centrifuge (TC), and (3) induction-vacuum/pressure (IP). The marginal fit was measured with an image analysis system. Significant differences (P =.005) were observed among the groups, with TC showing the lowest discrepancies (45.87 μm). No significant differences were observed between the two finish lines. The accuracy of fit achieved for the groups analyzed may be regarded as within the range of clinical acceptance.

Directly susceptible, noncarbon metal ceramic composite crucible

DOEpatents

Holcombe, Jr., Cressie E.; Kiggans, Jr., James O.; Morrow, S. Marvin; Rexford, Donald

1999-01-01

A sintered metal ceramic crucible suitable for high temperature induction melting of reactive metals without appreciable carbon or silicon contamination of the melt. The crucible comprises a cast matrix of a thermally conductive ceramic material; a perforated metal sleeve, which serves as a susceptor for induction heating of the crucible, embedded within the ceramic cast matrix; and a thermal-shock-absorber barrier interposed between the metal sleeve and the ceramic cast matrix to allow for differential thermal expansions between the matrix and the metal sleeve and to act as a thermal-shock-absorber which moderates the effects of rapid changes of sleeve temperature on the matrix.

Predominance of carbapenem-resistant Pseudomonas aeruginosa isolates carrying blaIMP and blaVIM metallo-β-lactamases in a major hospital in Costa Rica.

PubMed

Toval, Francisco; Guzmán-Marte, Anel; Madriz, Vivian; Somogyi, Teresita; Rodríguez, César; García, Fernando

2015-01-01

This study aimed to assess the molecular basis of the resistance to carbapenems in clinical isolates of Pseudomonas aeruginosa recovered from a tertiary-level health facility in San José, Costa Rica. A total of 198 non-duplicated isolates were evaluated for their susceptibility to β-lactams, aminoglycosides and fluoroquinolones. The production of metallo-β-lactamases (MBLs), the presence of MBL encoding genes (blaIMP, blaVIM and blaGIM-1) and the occurrence of these genes within class 1 integrons were investigated. In addition, an ERIC2 PCR fingerprinting method was used to elucidate the distribution of the detected MBL genes within the strain collection. Of the 198 isolates tested, 125 (63.1 %) were categorized as carbapenem-resistant. The majority (88.8 %) of the carbapemen-resistant isolates also showed resistance to ceftazidime, cefepime, aztreonam, ticarcillin/clavulanic acid, amikacin, gentamicin, tobramycin, ciprofloxacin and gatifloxacin. Among the carbapenem-resistant isolates, 102 (81.6 %) showed MBL activity. Strikingly, both blaIMP and blaVIM genes were simultaneously detected in most (94.1 %) of the 102 MBL producers. Five carbapenem-resistant MBL producers were positive only for blaIMP genes. Almost 70 % of the isolates examined harboured the intI1 gene, accompanied by the sul1 and qacEΔ1 genes in 136 (99 %) and 122 (89 %) isolates, respectively. The majority (94.4 %) of the carbapenem-resistant isolates carried the intI1 gene, in contrast to 26 % of the carbapenem-susceptible isolates. Ninety-three out of 96 (96.9 %) isolates carrying both blaIMP and blaVIM genes also harboured the intI1, sul1 and qacEΔ1 genes. Gene cassettes from carbapenem-susceptible and MBL-negative carbapenem-resistant isolates encoded aminoglycoside-resistance enzymes (aadA2, aadA4 and aadA6) as well as orfD and qacF genes. RAPD analysis distributed 126 of the isolates in 29 clusters. Eighty of the 90 blaIMP (+) blaVIM (+) isolates were sorted into 16 different clusters, suggesting that the blaIMP and blaVIM genes detected were located within a genetic element capable of lateral transfer. Carbapenem-resistant MBL-positive isolates were recovered from almost all hospital wards and were over-represented in samples obtained from the surgical emergency and intensive care therapy units. Remarkably, three carbapenem-resistant isolates, exhibiting MBL activity and carrying both blaIMP and blaVIM genes, were recovered from outpatients. Sequence analysis of both bla genes in various isolates revealed that they correspond to the alleles blaIMP-18 and blaVIM-2. To our knowledge, this is the first report of the combination of two metallo-β-lactamases encoded by the blaIMP-18 and blaVIM-2 genes in P. aeruginosa. © 2015 The Authors.

Formation of β-NiAl Phase During Casting of a Ni-Based Superalloy

NASA Astrophysics Data System (ADS)

Detrois, Martin; Jablonski, Paul D.

2018-04-01

A high-refractory Ni-based superalloy prototype was melted on a research scale while simulating industry practices. Ingots were vacuum induction melted and subjected to a computationally optimized homogenization heat treatment prior to fabrication which consisted of forging and hot rolling. Failure of one of the ingots at the early stage of the forging process was attributed to the precipitation of the β-NiAl phase during melting which stabilized the eutectic constituent.

Local ice melting by an antifreeze protein.

PubMed

Calvaresi, Matteo; Höfinger, Siegfried; Zerbetto, Francesco

2012-07-09

Antifreeze proteins, AFP, impede freezing of bodily fluids and damaging of cellular tissues by low temperatures. Adsorption-inhibition mechanisms have been developed to explain their functioning. Using in silico Molecular Dynamics, we show that type I AFP can also induce melting of the local ice surface. Simulations of antifreeze-positive and antifreeze-negative mutants show a clear correlation between melting induction and antifreeze activity. The presence of local melting adds a function to type I AFPs that is unique to these proteins. It may also explain some apparently conflicting experimental results where binding to ice appears both quasipermanent and reversible.

Numerical investigation of melting and solidification processes in modified surface layers of metal at induction heating

NASA Astrophysics Data System (ADS)

Shchukin, V. G.; Popov, V. N.

2017-10-01

One of the perspective ways to improve the operational properties of parts of machines during induction treatment of their surfaces is the modification of the melt by specially prepared nanoscale particles of refractory compounds (carbides, nitrides, carbonitrides, etc.). This approach allows us to increase the number of crystallization centers and to refine the structural components of the solidified metal. The resulting high dispersity and homogeneity of crystalline grains favorably affect the quality of the treated surfaces. 3D numerical simulation of thermophysical processes in the modification of the surface layer of metal in a moving substrate was carried out. It is assumed that the surface of the substrate is covered with a layer of specially prepared nanoscale particles of a refractory compound, which, upon penetration into the melt, are uniformly distributed in it. The possibility of applying a high-frequency electromagnetic field of high power for heating and melting of a metal (iron) for the purpose of its subsequent modification is investigated. The distribution of electromagnetic energy in the metal is described by empirical formulas. Melting of the metal is considered in the Stefan approximation, and upon solidification it is assumed that all nanoparticles serve as centers for volume-sequential crystallization. Calculations were carried out with the following parameters: specific power p0 = 35 and 40 kW/cm2 at frequency f = 440 and 1200 kHz, the substrate velocity V = 0.5-2.5 cm/s, the nanoparticles' size is 50 nm and concentration Np = 2.0 . 109 cm-3. Based on the results obtained in a quasi-stationary formulation, the distribution of the temperature field, the dimensions of the melting and crystallization zones, the change in the solid fraction in the two-phase zone, the area of the treated substrate surface, depending on the speed of its movement and induction heating characteristics were estimated.

Advanced Welding Tool

NASA Technical Reports Server (NTRS)

1982-01-01

Accutron Tool & Instrument Co.'s welder was originally developed as a tool specifically for joining parts made of plastic or composite materials in any atmosphere to include the airless environment of space. Developers decided on induction or magnetic heating to avoid causing deformation and it also can be used with almost any type of thermoplastic material. Induction coil transfers magnetic flux through the plastic to a metal screen that is sandwiched between the sheets of plastic to be joined. When welder is energized, alternating current produces inductive heating on the screen causing the adjacent plastic surfaces to melt and flow into the mesh, creating a bond on the total surface area. Dave Brown, owner of Great Falls Canoe and Kayak Repair, Vienna, VA, uses a special repair technique based on operation of the Induction Toroid Welder to fix canoes. Whitewater canoeing poses the problem of frequent gashes that are difficult to repair. The main reason is that many canoes are made of plastics. The commercial Induction model is a self-contained, portable welding gun with a switch on the handle to regulate the temperature of the plastic melting screen. Welder has a broad range of applications in the automobile, appliance, aerospace and construction industries.

Fluvial erosion and post-erosional processes on Titan

USGS Publications Warehouse

Jaumann, R.; Brown, R.H.; Stephan, K.; Barnes, J.W.; Soderblom, L.A.; Sotin, Christophe; Le, Mouelic S.; Clark, R.N.; Soderblom, J.; Buratti, B.J.; Wagner, R.; McCord, T.B.; Rodriguez, S.; Baines, K.H.; Cruikshank, D.P.; Nicholson, P.D.; Griffith, C.A.; Langhans, M.; Lorenz, R.D.

2008-01-01

The surface of Titan has been revealed by Cassini observations in the infrared and radar wavelength ranges as well as locally by the Huygens lander instruments. Sand seas, recently discovered lakes, distinct landscapes and dendritic erosion patterns indicate dynamic surface processes. This study focus on erosional and depositional features that can be used to constrain the amount of liquids involved in the erosional process as well as on the compositional characteristics of depositional areas. Fluvial erosion channels on Titan as identified at the Huygens landing site and in RADAR and Visible and Infrared Mapping Spectrometer (VIMS) observations have been compared to analogous channel widths on Earth yielding average discharges of up to 1600 m3/s for short recurrence intervals that are sufficient to move centimeter-sized sediment and significantly higher discharges for long intervals. With respect to the associated drainage areas, this roughly translates to 1-150 cm/day runoff production rates with 10 years recurrence intervals and by assuming precipitation this implies 0.6-60 mm/h rainfall rates. Thus the observed surface erosion fits with the methane convective storm models as well as with the rates needed to transport sediment. During Cassini's T20 fly-by, the VIMS observed an extremely eroded area at 30?? W, 7?? S with resolutions of up to 500 m/pixel that extends over thousands of square kilometers. The spectral characteristics of this area change systematically, reflecting continuous compositional and/or particle size variations indicative of transported sediment settling out while flow capacities cease. To account for the estimated runoff production and widespread alluvial deposits of fine-grained material, release of area-dependent large fluid volumes are required. Only frequent storms with heavy rainfall or cryovolcanic induced melting can explain these erosional features. ?? 2008 Elsevier Inc.

Comparison of in-house and commercial real time-PCR based carbapenemase gene detection methods in Enterobacteriaceae and non-fermenting gram-negative bacterial isolates.

PubMed

Smiljanic, M; Kaase, M; Ahmad-Nejad, P; Ghebremedhin, B

2017-07-10

Carbapenemase-producing gram-negative bacteria are increasing globally and have been associated with outbreaks in hospital settings. Thus, the accurate detection of these bacteria in infections is mandatory for administering the adequate therapy and infection control measures. This study aimed to establish and evaluate a multiplex real-time PCR assay for the simultaneous detection of carbapenemase gene variants in gram-negative rods and to compare the performance with a commercial RT-PCR assay (Check-Direct CPE). 116 carbapenem-resistant Enterobacteriaceae, Pseudomonas aeruginosa and Acinetobacter baumannii isolates were genotyped for carbapenemase genes by PCR and sequencing. The defined isolates were used for the validation of the in-house RT-PCR by use of designed primer pairs and probes. Among the carbapenem-resistant isolates the genes bla KPC , bla VIM , bla NDM or bla OXA were detected. Both RT-PCR assays detected all bla KPC , bla VIM and bla NDM in the isolates. The in-house RT-PCR detected 53 of 67 (79.0%) whereas the commercial assay detected only 29 (43.3%) of the OXA genes. The in-house sufficiently distinguished the most prevalent OXA types (23-like and 48-like) in the melting curve analysis and direct detection of the genes from positive blood culture vials. The Check-Direct CPE and the in-house RT-PCR assay detected the carbapenem resistance from solid culture isolates. Moreover, the in-house assay enabled the identification of carbapenemase genes directly from positive blood-culture vials. However, we observed insufficient detection of various OXA genes in both assays. Nevertheless, the in-house RT-PCR detected the majority of the OXA type genes in Enterobacteriaceae and A. baumannii.

Carbapenemase-Producing Enterobacteriaceae in Spain in 2012

PubMed Central

Saez, David; Bautista, Verónica; Fernández-Romero, Sara; Hernández-Molina, Juan Manuel; Pérez-Vázquez, María; Aracil, Belén; Campos, José

2013-01-01

We report the epidemiological impact of carbapenemase-producing Enterobacteriaceae (CPE) in Spain in 2012. Of the 237 carbapenemases detected, 163 were from the OXA-48 group, 60 were from VIM-1, 8 were from KPC-2, 5 were from IMP, and 1 was from NDM-1. Interhospital spread of carbapenemase-producing Klebsiella pneumoniae was due to a limited number of multilocus sequence types (MLST) and carbapenemase types, including ST15–VIM-1, ST11–OXA-48, ST405–OXA-48, ST101–KPC-2, and ST11–VIM-1. The number of CPE cases in Spain has increased sharply in recent years, due mainly to the emergence of OXA-48. PMID:24041898

Monte Carol-based validation of neutronic methodology for EBR-II analyses

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liaw, J.R.; Finck, P.J.

1993-01-01

The continuous-energy Monte Carlo code VIM (Ref. 1) has been validated extensively over the years against fast critical experiments and other neutronic analysis codes. A high degree of confidence in VIM for predicting reactor physics parameters has been firmly established. This paper presents a numerical validation of two conventional multigroup neutronic analysis codes, DIF3D (Ref. 4) and VARIANT (Ref. 5), against VIM for two Experimental Breeder Reactor II (EBR-II) core loadings in detailed three-dimensional hexagonal-z geometry. The DIF3D code is based on nodal diffusion theory, and it is used in calculations for day-today reactor operations, whereas the VARIANT code ismore » based on nodal transport theory and is used with increasing frequency for specific applications. Both DIF3D and VARIANT rely on multigroup cross sections generated from ENDF/B-V by the ETOE-2/MC[sup 2]-II/SDX (Ref. 6) code package. Hence, this study also validates the multigroup cross-section processing methodology against the continuous-energy approach used in VIM.« less

Thalamic deep brain stimulation decelerates automatic lexical activation.

PubMed

Ehlen, Felicitas; Vonberg, Isabelle; Tiedt, Hannes O; Horn, Andreas; Fromm, Ortwin; Kühn, Andrea A; Klostermann, Fabian

2017-02-01

Deep Brain Stimulation (DBS) of the thalamic ventral intermediate nucleus (VIM) is a therapeutic option for patients with essential tremor. Despite a generally low risk of side effects, declines in verbal fluency (VF) have previously been reported. We aimed to specify effects of VIM-DBS on major cognitive operations needed for VF task performance, represented by clusters and switches. Clusters are word production spurts, thought to arise from automatic activation of associated information pertaining to a given lexical field. Switches are slow word-to-word transitions, presumed to indicate controlled operations for stepping from one lexical field to another. Thirteen essential tremor patients with VIM-DBS performed verbal fluency tasks in their VIM-DBS ON and OFF conditions. Clusters and switches were formally defined by mathematical criteria. All results were compared to those of fifteen healthy control subjects, and significant OFF-ON-change scores were correlated to stimulation parameters. Patients produced fewer words than healthy controls. DBS ON compared to DBS OFF aggravated this deficit by prolonging the intervals between words within clusters, whereas switches remained unaffected. This stimulation effect correlated with more anterior electrode positions. VIM-DBS seems to influence word output dynamics during verbal fluency tasks on the level of word clustering. This suggests a perturbation of automatic lexical co-activation by thalamic stimulation, particularly if delivered relatively anteriorly. The findings are discussed in the context of the hypothesized role of the thalamus in lexical processing. Copyright © 2016 Elsevier Inc. All rights reserved.

Emergence of Imipenem-Resistant Pseudomonas aeruginosa Clinical Isolates from Egypt Coharboring VIM and IMP Carbapenemases.

PubMed

El-Domany, Ramadan Ahmed; Emara, Mohamed; El-Magd, Mohammed A; Moustafa, Walaa H; Abdeltwab, Nesma M

2017-09-01

Pseudomonas aeruginosa is an important human pathogen and the leading cause of nosocomial infections. P. aeruginosa is characterized by massive intrinsic resistance to a multiple classes of antibiotics with carbapenems being the most potent inhibitor of P. aeruginosa and considered the first choice for its treatment. Therefore, it is crucial to investigate novel mechanisms of resistance of P. aeruginosa to carbapenems for achieving successful therapy. A total of 114 P. aeruginosa isolates from two university hospitals in Egypt were recruited in this study. Antimicrobial susceptibility testing revealed that 50 isolates (43.8%) exhibited multidrug-resistant (MDR) phenotype, of them 14 isolates (12.2%) were imipenem (IPM)-resistant. Of these 14 isolates, 13 isolates (11.4%) exhibited the metallo-β-lactamase (MBL) phenotype. MBLs encoding genes, VIM and IMP, were identified by PCR. PCR results revealed that four isolates harbored the VIM gene alone, one isolate harbored IMP gene alone, and four isolates harbored both genes. The correct size of PCR products of VIM and IMP genes (390 and 188 bp, respectively) were sequenced to confirm results of PCR and to look for any possible polymorphism among MBL genes of tested isolates. Data analysis of these sequences showed 100% identity of nucleotide sequences of MBL genes among tested Egyptian patients. To our knowledge, this is the first report of IMP carbapenemase-encoding gene in Africa and the first detection of the emergence of P. aeruginosa coproducing VIM and IMP genes in Egypt.

Vimentin affects localization and activity of sodium-glucose cotransporter SGLT1 in membrane rafts.

PubMed

Runembert, Isabelle; Queffeulou, Guillaume; Federici, Pierre; Vrtovsnik, François; Colucci-Guyon, Emma; Babinet, Charles; Briand, Pascale; Trugnan, Germain; Friedlander, Gérard; Terzi, Fabiola

2002-02-15

It has been reported that vimentin, a cytoskeleton filament that is expressed only in mesenchymal cells after birth, is re-expressed in epithelial cells in vivo under pathological conditions and in vitro in primary culture. Whether vimentin re-expression is only a marker of cellular dedifferentiation or is instrumental in the maintenance of cell structure and/or function is a matter of debate. To address this issue, we used renal proximal tubular cells in primary culture from vimentin-null mice (Vim(-/-)) and from wild-type littermates (Vim(+/+)). The absence of vimentin did not affect cell morphology, proliferation and activity of hydrolases, but dramatically decreased Na-glucose cotransport activity. This phenotype was associated with a specific reduction of SGLT1 protein in the detergent-resistant membrane microdomains (DRM). In Vim(+/+) cells, disruption of these microdomains by methyl-beta-cyclodextrin decreased SGLT1 protein abundance in DRM, a change that was paralleled by a decrease of Na-glucose transport activity. Importantly, we showed that vimentin is located to DRM, but it disappeared after methyl-beta-cyclodextrin treatment. In Vim(-/-) cells, supplementation of cholesterol with cholesterol-methyl-beta-cyclodextrin complexes completely restored Na-glucose transport activity. Interestingly, neither cholesterol content nor cholesterol metabolism changed in Vim(-/-) cells. Our results are consistent with the view that re-expression of vimentin in epithelial cells could be instrumental to maintain the physical state of rafts and, thus, the function of DRM-associated proteins.

Collapse of the vortex-lattice inductance and shear modulus at the melting transition in untwinned YBa2Cu3O7

NASA Astrophysics Data System (ADS)

Matl, Peter; Ong, N. P.; Gagnon, R.; Taillefer, L.

2002-06-01

The complex resistivity ρ^(ω) of the vortex lattice in an untwinned crystal of 93-K YBa2Cu3O7 has been measured at frequencies ω/2π from 100 kHz to 20 MHz in a 2-T field H||c, using a four-probe rf transmission technique that enables continuous measurements versus ω and temperature T. As T is increased, the inductance Ls(ω)=Imρ^(ω)/ω increases steeply to a cusp at the melting temperature Tm, and then undergoes a steep collapse consistent with vanishing of the shear modulus c66. We discuss in detail the separation of the vortex-lattice inductance from the ``volume'' inductance, and other skin-depth effects. To analyze the spectra, we consider a weakly disordered lattice with a low pin density. Close fits are obtained to ρ1(ω) over 2 decades in ω. Values of the pinning parameter κ and shear modulus c66 obtained show that c66 collapses by over 4 decades at Tm, whereas κ remains finite.

Cassini ISS and VIMS observations of Titan's north polar region during the T120 and T121 flybys: The Curious Case of the Clouds

NASA Astrophysics Data System (ADS)

Turtle, E. P.; Barnes, J. W.; Perry, J.; Barbara, J.; Hayes, A.; Corlies, P.; Kelland, J.; West, R. A.; Del Genio, A. D.; Soderblom, J. M.; McEwen, A. S.; Sotin, C.

2016-12-01

As northern summer approaches, atmospheric circulation models predict storm activity will pick up at Titan's high northern latitudes, as was observed at high southern latitudes upon Cassini's arrival during late southern summer in 2004. Cassini's Imaging Science Subsystem (ISS) and Visual and Infrared Mapping Spectrometer (VIMS) teams have been targeting Titan to document changes in weather patterns over the course of the mission, and there is particular interest in following the onset of clouds in the north polar region where Titan's lakes and seas are concentrated. The T120 and T121 flybys of Titan, on 7 June and 25 July 2016, respectively, provided views of high northern latitudes, and each instrument performed a series of observations over more than 24 hours during both flybys. Intriguingly, at first look the ISS and VIMS observations appear strikingly different from each other: in the ISS observations made during each flyby, surface features are apparent and only a few isolated clouds are detected; however, the VIMS observations suggest widespread cloud cover at high northern latitudes during both flybys. Although the instruments achieve different resolutions, that alone cannot explain the differences. The observations were made over the same time periods, so differences in illumination geometry or changes in the clouds themselves are also unlikely to be the cause for the apparent discrepancy; VIMS shows persistent atmospheric features over the entire observation period and ISS consistently detects surface features with just a few localized clouds. Clouds with low optical depth (lower than the optical depth of Titan's atmospheric haze at the same wavelength) might be more easily apparent at the longer wavelengths of the VIMS observations, which extend out to 5 µm (haze optical depth 0.2), compared to the ISS observations at 938 nm (haze optical depth 2). However, the lack of any apparent change in the visibility of lakes and seas in the ISS images compared to previous flybys where no clouds were observed is still difficult to explain. We will present our analyses of the sequences of observations made by ISS and VIMS during T120 and T121, as well as an ongoing ground-based observing campaign (including data from 8 June and 23 July), and the implications for the behavior of Titan's atmosphere leading up to northern summer.

Cassini VIMS-V observations of a giant dynamical structure in the Saturn's northern hemisphere

NASA Astrophysics Data System (ADS)

Moriconi, M. L.; D'Aversa, E.; Adriani, A.; Filacchione, G.

2012-12-01

Vortices have been observed on Saturn since the years of the Voyager's missions. Successively high resolution Cassini's images, provided by the Imaging Science Subsystem (ISS) cameras, permitted longer periods of observation of the Saturn's dynamical structures, included a long-lived cyclone in the southern hemisphere (del Río-Gaztelurrutia et al., 2010). The Visual and Infrared Mapping Spectrometer (VIMS) onboard Cassini spacecraft on January 4th 2012 has observed an oval structure, about 8000 km in diameter size and 0.87 eccentricity in the Saturn's north hemisphere. The vortex is centered at an average planetocentric latitude of 37.5 °North, inside the storm system detected at the end of 2010 (Fletcher et al, 2011). To find the first occurrence of this vortex we started the examination of the VIMS and ISS databases from the 2010 fall until the end of January 2012. We searched also in the archive of ISS narrow angle (NAC) and wide angle (WAC) cameras, publicly available from the NASA Planetary Data System (PDS) Imaging Node, for those images both in concomitance and time shifted with respect to the VIMS ones. We adopted the same identification criterion used by del Río-Gaztelurrutia et al. (2010), by searching for an oval of analogous dimension in the same zonal region. ISS data helped us in checking the existence of the oval in time periods not covered by VIMS data and in resolving oval's details that we cannot appreciate in the VIMS spectral frames, less spatially resolved than the cameras' corresponding filters. This vortex has been observed at different distances and viewing geometries at least 6 and 5 times by VIMS and ISS, respectively, in the examined time period. We estimate that the first vortex's detection occurred in the first half of January 2011 (ISS) while the last one in January 2012 (VIMS). In this study we aim to determine the oval identity in a univocal way, on the basis of its position and size, in order to monitor both the structure living cycle and its evolution. We describe the position and size of the vortex for each image with the greatest detail by means of different processing and mapping techniques. Our results show that there were some zonal drift and size and shape evolution in the time period of our survey. In a second abstract (Oliva et al., 2012) the results of this study, finalized to check the altitude variation and the optical depth of the cloud at the top of the dynamical structure, are reported. Reference Fletcher et al., Thermal Structure and Dynamics of Saturn's Northern Springtime Disturbance, Science, 332, 6036, 1413-1417, 2011. Oliva F., A. Adriani, M.L. Moriconi. Cloud-Top evaluation of a Saturn's giant vortex by Cassini-VIMS-V observations. Submitted as poster to this meeting, 2012. T. del Río-Gaztelurrutia, J. Legarreta, R. Hueso, S. Pérez-Hoyos, A. Sánchez-Lavega. A long-lived cyclone in Saturn's atmosphere: Observations and models. Icarus, 209, 665-681, 2010.

ARN II Program

DTIC Science & Technology

2004-05-26

QAR drives the decision to convert from WInS to WAWF-RA. VIM-SAP Production Companies CAGE WAWF-RA 1. AC Inc. 9Y595 X 2. Action Embroidery Corp 75556 3...Status 5/26/2004 VIM-SAP Production Companies CAGE WAWF-RA 35. Equa Industries Division Of Propper 8W919 X 36. Eveready Embroidery Inc. 7A611 X 37

KPC and VIM producing Enterobacter cloacae strain from a hospital in northeastern Venezuela.

PubMed

Martínez, Dianny; Marcano, Daniel; Rodulfo, Hectorina; Salgado, Nurys; Cuaical, Nirvia; Rodriguez, Lucy; Caña, Luisa; Medina, Belkis; Guzman, Militza; De Donato, Marcos

2015-06-01

An 83-year-old male patient is admitted to the central hospital in Cumana, Venezuela with severe urinary infection, history of hospitalizaions and prolonged antimicrobial treatments. A strain of Enterobacter cloacae was isolated showing resistance to multiple types of antibiotics (only sensitive to gentamicin), with phenotype of serine- and metallo-carbapenemases. Both, bla(VIM-2) and bla(KPC) genes were detected in the isolate. This is the first report of an Enterobacteriaceae species producing both KPC carbapenemase and VIM metallo carbapenemase in Venezuela. This finding has a great clinical and epidemiological impact in the region, because of the feasibility of transferring these genes, through mobile elements to other strains of Enterobacter and to other infection-causing species of bacteria.

SiO(x) nanoparticles synthesized by an evaporation and condensation process using induction melting of silicon and gas injection.

PubMed

Jang, Bo Yun; Lee, Jin Seok; Kim, Joon Soo

2013-05-01

SiO(x) nanoparticles were synthesized using a specially designed induction melting system equipped with a segmented graphite crucible. The graphite crucible with the segmented wall was the key to enhancing the evaporation rate due to the increase of the evaporation area and convection of the silicon melt. Injection of the gas mixture of oxygen (O2) and argon (Ar) on silicon (Si) melt caused the formation of SiO(x) nanoparticles. The evaporated SiO(x) nanoparticles were then cooled and condensed in a process chamber. The effects of the O2/Ar ratio in the injection gas on the microstructures of the SiO(x) nanoparticles were then investigated. Synthesized SiO(x) nanoparticles were proven to be of a homogeneous amorphous phase with average diameters of 30-35 nm. The microstructures were independent from the O2/Ar ratio of the injected gas. However, x increased from 1.36 to 1.84 as the O2/Ar ratio increased. The purity of the synthesized nanoparticles was about 99.9%. SiO(x) nanoparticles could be applied as the active anode material in a lithium (Li) ion secondary battery.

Plasmid Profile Analysis and bla VIM Gene Detection of Metalo β-lactamase (MBL) Producing Pseudomonas aeruginosa Isolates from Clinical Samples

PubMed Central

M, Jeya

2014-01-01

Introduction:Pseudomonas aeruginosa is a frequent colonizer of hospitalized patients. They are responsible for serious infections such as meningitis, urological infections, septicemia and pneumonia. Carbapenem resistance of Pseudomonas aeruginosa is currently increasingly reported which is often mediated by production of metallo-β-lactamase (MBL). Multidrug resistant Pseudomonas aeruginosa isolates may involve reduced cell wall permeability, production of chromosomal and plasmid mediated β lactamases, aminoglycosides modifying enzymes and an active multidrug efflux mechanism. Objective: This study is aimed to detect the presence and the nature of plasmids among metallo-β-lactamase producing Pseudomonas aeruginosa isolates. Also to detect the presence of bla VIM gene from these isolates. Materials and Methods: Clinical isolates of Pseudomonas aeruginosa showing the metalo-β-lactamase enzyme (MBL) production were isolated. The MBL production was confirmed by three different methods. From the MBL producing isolates plasmid extraction was done by alkaline lysis method. Plasmid positive isolates were subjected for blaVIM gene detection by PCR method. Results: Two thousand seventy six clinical samples yielded 316 (15.22%) Pseudomonas aeruginosa isolates, out of which 141 (44.62%) were multidrug resistant. Among them 25 (17.73%) were metallo-β-lactamase enzyme producers. Plasmids were extracted from 18 out of 25 isolates tested. Five out of 18 isolates were positive for the blaVIM gene detection by the PCR amplification. Conclusion: The MBL producers were susceptible to polymyxin /colistin with MIC ranging from 0.5 – 2μg/ml. Molecular detection of specific genes bla VIM were positive among the carbapenem resistant isolates. PMID:25120980

Plasmid Profile Analysis and bla VIM Gene Detection of Metalo β-lactamase (MBL) Producing Pseudomonas aeruginosa Isolates from Clinical Samples.

PubMed

S, Jayanthi; M, Jeya

2014-06-01

Pseudomonas aeruginosa is a frequent colonizer of hospitalized patients. They are responsible for serious infections such as meningitis, urological infections, septicemia and pneumonia. Carbapenem resistance of Pseudomonas aeruginosa is currently increasingly reported which is often mediated by production of metallo-β-lactamase (MBL). Multidrug resistant Pseudomonas aeruginosa isolates may involve reduced cell wall permeability, production of chromosomal and plasmid mediated β lactamases, aminoglycosides modifying enzymes and an active multidrug efflux mechanism. This study is aimed to detect the presence and the nature of plasmids among metallo-β-lactamase producing Pseudomonas aeruginosa isolates. Also to detect the presence of bla VIM gene from these isolates. Clinical isolates of Pseudomonas aeruginosa showing the metalo-β-lactamase enzyme (MBL) production were isolated. The MBL production was confirmed by three different methods. From the MBL producing isolates plasmid extraction was done by alkaline lysis method. Plasmid positive isolates were subjected for blaVIM gene detection by PCR method. Two thousand seventy six clinical samples yielded 316 (15.22%) Pseudomonas aeruginosa isolates, out of which 141 (44.62%) were multidrug resistant. Among them 25 (17.73%) were metallo-β-lactamase enzyme producers. Plasmids were extracted from 18 out of 25 isolates tested. Five out of 18 isolates were positive for the blaVIM gene detection by the PCR amplification. The MBL producers were susceptible to polymyxin /colistin with MIC ranging from 0.5 - 2μg/ml. Molecular detection of specific genes bla VIM were positive among the carbapenem resistant isolates.

Molecular analysis of carbapenem-resistant strains of Pseudomonas aeruginosa isolated from patients hospitalized in various transplantation wards between 2008 and 2011.

PubMed

Kosykowska, E; Szymanek-Majchrzak, K; Walter de Walthoffen, S; Izdebski, R; Mlynarczyk, A; Ciszek, M; Chmura, A; Durlik, M; Paczek, L; Deborska-Materkowska, D; Sawicka-Grzelak, A; Mlynarczyk, G

2014-10-01

Recent years have seen a concerning increase in the number of carbapenem-resistant Pseudomonas aeruginosa strains. P aeruginosa is one of the most dangerous factors causing nosocomial infections, and immunosuppressed patients constitute a special risk group. The purpose of our study was to conduct a molecular analysis of 22 clinical isolates of carbapenem-resistant P aeruginosa obtained between 2008 and 2011. Metallo-beta-lactamase (MBL) phenotype tests were conducted. A polymerase chain reaction technique was used to detect VIM, IMP, NDM, and GIM carbapenemase-encoding genes. The minimum inhibitory concentrations were determined for imipenem, meropenem, and doripenem. Molecular typing was conducted with the use of restriction fragment length polymorphism/pulsed-field gel electrophoresis (RFLP-PFGE). Of the 22 strains initially resistant to at least one carbapenem, we selected 18 that exhibited the MBL phenotype. Of those 18, we identified 15 strains expressing VIM carbapenemase-encoding genes. None of the other evaluated genes were detected. VIM-positive isolates exhibited higher levels of resistance than the other ones. The RFLP technique revealed 10 different PFGE types and 6 epidemic foci. Identical strains were isolated over the period of up to 3 years. The reason for resistance to carbapenems in the majority (68%) of P aeruginosa strains isolated at the evaluated hospital was the presence of VIM carbapenemase. It is safe to say that the VIM carbapenemase is responsible for a higher level of resistance than unidentified mechanisms. Carbapenem-resistant strains of P aeruginosa spread clonally within individual wards and are likely to be of hospital origin.

Chemical, thermal and impact processing of asteroids

NASA Technical Reports Server (NTRS)

Scott, E. R. D.; Taylor, G. J.; Newsom, H. E.; Herbert, F.; Zolensky, M.

1989-01-01

The geological effects of impacts, heating, melting, core formation, and aqueous alteration on asteroids are reviewed. A review of possible heat sources appears to favor an important role for electrical induction heating. The effects of each geologic process acting individually and in combination with others, are considered; it is concluded that there is much evidence for impacts during alteration, metamorphism and melting. These interactions vastly increased the geologic diversity of the asteroid belt. Subsequent impacts of cool asteroids did not reduce this diversity. Instead new rock types were created by mixing, brecciation and minor melting.

Process for alloying uranium and niobium

DOEpatents

Holcombe, Cressie E.; Northcutt, Jr., Walter G.; Masters, David R.; Chapman, Lloyd R.

1991-01-01

Alloys such as U-6Nb are prepared by forming a stacked sandwich array of uraniun sheets and niobium powder disposed in layers between the sheets, heating the array in a vacuum induction melting furnace to a temperature such as to melt the uranium, holding the resulting mixture at a temperature above the melting point of uranium until the niobium dissolves in the uranium, and casting the uranium-niobium solution. Compositional uniformity in the alloy product is enabled by use of the sandwich structure of uranium sheets and niobium powder.

Lakes and ponds recreation management: a state-wide application of the visitor impact management process

Treesearch

Jerry J. Vaske; Rodney R. Zwick; Maureen P. Donnelly

1992-01-01

The Visitor Impact Management (VIM) process is designed to identify unacceptable changes occurring as a result of visitor use and to develop management strategies to keep visitor impacts within acceptable levels. All previous attempts to apply the VIM planning framework have concentrated on specific resources. This paper expands this focus to an entire state. Based on...

Audiovisual Aids and Publications Available from the VIMS/Sea Grant Marine Education Center.

ERIC Educational Resources Information Center

Gammisch, Sue, Comp.

This catalog contains an inventory of 16mm films, filmstrips, film loops, slide programs, records, and publications about the marine sciences and sea life that are available from VIMS/Sea Grant Marine Education Center; information on the borrowing of the AV materials is included, as well as prices for books and leaflets. The entries are listed…

Prevalence of blaIMP, and blaVIM gene carriage in metallo-β-lactamase-producing burn isolates of Pseudomonas aeruginosa in Tehran.

PubMed

Salimi, Fatemeh; Eftekhar, Fereshteh

2014-01-01

To study the prevalence of blaVIM and blaIMP genes in metallo-β-lactamase (MBL)-producing burn isolates of Pseudomonas aeruginosa in relation with AmpC and extended-spectrum β-lactamase (ESBL) production. Thirty-two carbapenem-resistant MBL-producing P aeruginosa burn isolates from Shahid Motahari Burn Hospital in Tehran were employed. Antibiotic susceptibility was determined to 13 antibiotics including imipenem and meropenem by disk diffusion. AmpC and ESBL production was detected by the AmpC disk test and combined disk diffusion assay, respectively, blaIMP and blaVIM gene carriage was shown by polymerase chain reaction and type-specific primers. AmpC production was observed in 81% and ESBL production was detected in 12.5% of the isolates. blalMP carriage was observed in 56.25% and blaVIM gene in 46.8% of the isolates. Surprisingly, 43.5% of the isolates carried both blalMP and blaviM genes. We think that this is the first report on the cocarriage of blalMP and blavIM in P aeruginosa. There was also a strong association between MBL gene carriage and AmpC β-lactamase production.

[Molecular epidemiology of beta-lactamases in ceftazidime-resistant Pseudomonas aeruginosa isolates].

PubMed

Er, Halil; Altındiş, Mustafa; Aşık, Gülşah; Demir, Cengiz

2015-04-01

Pseudomonas aeruginosa is an important opportunistic pathogen that cause mainly nosocomial infections especially in the immunocompromised patients, the elderly and patients with severe burns. The bacterial feature of developing high degree of resistance against several antibiotics leads to increased morbidity and mortality of P.aeruginosa infections. The aims of this study were to investigate the antibiotic susceptibilities of P.aeruginosa strains isolated from hospitalized patients and to determine the presence of resistance enzymes namely PER, GES, KPC, VIM, IMP and OXA. A total of 195 P.aeruginosa strains isolated from different clinical samples (29 sputum, 67 wound, 53 tracheal aspirate, 23 blood, 18 urine, 3 cerebrospinal fluid, 2 pleural fluid) of inpatients (134 male, 61 female) in Afyon Kocatepe University School of Medicine Hospital between 2010-2012, were included in the study. The isolates were identified by conventional methods and automated systems (VITEK 2, BioMerieux, France), and their antibiotic susceptibilities were detected by disk diffusion and E-test methods. Inducible beta-lactamase (IBL), extended-spectrum beta-lactamase (ESBL) and metallo-beta-lactamase (MBL) productions of the isolates were phenotypically investigated by double disk induction, double disk synergy and E-test methods, respectively. The presence of resistance genes encoding PER, GES, KPC, VIM, IMP and OXA enzymes were determined by real-time polymerase chain reaction, and sequence analysis was applied to positive samples. In our study, the antibiotic resistance rates of 195 P.aeruginosa strains were found as follows: ceftazidime 100%, tazobactam/piperacillin 90.8%, aztreonam 60.5%, cefepime 50.2%, imipenem 48.2%, meropenem 47.2%, ofloxacin 47.2%, piperacillin 44.1%, levofloxacin 31.3%, ciprofloxacin 26.2%, gentamicin 11.8%, amikacin 8.7% and tobramycin 6.2%. With the use of phenotypical methods, IBL, ESBL and MBL production rates in the isolates were detected as 89.2% (174/195), 30.7% (60/195) and 26.7% (52/195), respectively. Molecular studies showed that, five strains harboured OXA-10, four OXA-14, four VIM-2, two IMP-1, 26 GES-1 and 87 ABC transporter permease genes, while PER and KPC genes were not detected in any of the isolates. In conclusion, it was considered that the detection of beta-lactamase genes in bacteria and the identification of beta-lactamase types may provide facilities in selection of antibiotics, monitorization of therapy, prevention of resistance development of infection control programs.

Principal components analysis of Jupiter VIMS spectra

USGS Publications Warehouse

Bellucci, G.; Formisano, V.; D'Aversa, E.; Brown, R.H.; Baines, K.H.; Bibring, J.-P.; Buratti, B.J.; Capaccioni, F.; Cerroni, P.; Clark, R.N.; Coradini, A.; Cruikshank, D.P.; Drossart, P.; Jaumann, R.; Langevin, Y.; Matson, D.L.; McCord, T.B.; Mennella, V.; Nelson, R.M.; Nicholson, P.D.; Sicardy, B.; Sotin, Christophe; Chamberlain, M.C.; Hansen, G.; Hibbits, K.; Showalter, M.; Filacchione, G.

2004-01-01

During Cassini - Jupiter flyby occurred in December 2000, Visual-Infrared mapping spectrometer (VIMS) instrument took several image cubes of Jupiter at different phase angles and distances. We have analysed the spectral images acquired by the VIMS visual channel by means of a principal component analysis technique (PCA). The original data set consists of 96 spectral images in the 0.35-1.05 ??m wavelength range. The product of the analysis are new PC bands, which contain all the spectral variance of the original data. These new components have been used to produce a map of Jupiter made of seven coherent spectral classes. The map confirms previously published work done on the Great Red Spot by using NIMS data. Some other new findings, presently under investigation, are presented. ?? 2004 Published by Elsevier Ltd on behalf of COSPAR.

Titan Mystery Clouds

NASA Image and Video Library

2016-12-21

This comparison of two views from NASA's Cassini spacecraft, taken fairly close together in time, illustrates a peculiar mystery: Why would clouds on Saturn's moon Titan be visible in some images, but not in others? In the top view, a near-infrared image from Cassini's imaging cameras, the skies above Saturn's moon Titan look relatively cloud free. But in the bottom view, at longer infrared wavelengths, Cassini sees a large field of bright clouds. Even though these views were taken at different wavelengths, researchers would expect at least a hint of the clouds to show up in the upper image. Thus they have been trying to understand what's behind the difference. As northern summer approaches on Titan, atmospheric models have predicted that clouds will become more common at high northern latitudes, similar to what was observed at high southern latitudes during Titan's late southern summer in 2004. Cassini's Imaging Science Subsystem (ISS) and Visual and Infrared Mapping Spectrometer (VIMS) teams have been observing Titan to document changes in weather patterns as the seasons change, and there is particular interest in following the onset of clouds in the north polar region where Titan's lakes and seas are concentrated. Cassini's "T120" and "T121" flybys of Titan, on June 7 and July 25, 2016, respectively, provided views of high northern latitudes over extended time periods -- more than 24 hours during both flybys. Intriguingly, the ISS and VIMS observations appear strikingly different from each other. In the ISS observations (monochrome image at top), surface features are easily identifiable and only a few small, isolated clouds were detected. In contrast, the VIMS observations (color image at bottom) suggest widespread cloud cover during both flybys. The observations were made over the same time period, so differences in illumination geometry or changes in the clouds themselves are unlikely to be the cause for the apparent discrepancy: VIMS shows persistent atmospheric features over the entire observation period and ISS consistently detects surface features with just a few localized clouds. The answer to what could be causing the discrepancy appears to lie with Titan's hazy atmosphere, which is much easier to see through at the longer infrared wavelengths that VIMS is sensitive to (up to 5 microns) than at the shorter, near-infrared wavelength used by ISS to image Titan's surface and lower atmosphere (0.94 microns). High, thin cirrus clouds that are optically thicker than the atmospheric haze at longer wavelengths, but optically thinner than the haze at the shorter wavelength of the ISS observations, could be detected by VIMS and simultaneously lost in the haze to ISS -- similar to trying to see a thin cloud layer on a hazy day on Earth. This phenomenon has not been seen again since July 2016, but Cassini has several more opportunities to observe Titan over the last months of the mission in 2017, and scientists will be watching to see if and how the weather changes. These two images were taken as part of the T120 flyby on June 7 (VIMS) and 8 (ISS), 2016. The distance to Titan was about 28,000 miles (45,000 kilometers) for the VIMS image and about 398,000 miles (640,000 kilometers) for the ISS image. The VIMS image has been processed to enhance the visibility of the clouds; in this false-color view, clouds appear nearly white, atmospheric haze is pink, and surface areas would appear green. http://photojournal.jpl.nasa.gov/catalog/PIA21054

Saturn's icy satellites investigated by Cassini-VIMS. IV. Daytime temperature maps

NASA Astrophysics Data System (ADS)

Filacchione, Gianrico; D'Aversa, Emiliano; Capaccioni, Fabrizio; Clark, Roger N.; Cruikshank, Dale P.; Ciarniello, Mauro; Cerroni, Priscilla; Bellucci, Giancarlo; Brown, Robert H.; Buratti, Bonnie J.; Nicholson, Phillip D.; Jaumann, Ralf; McCord, Thomas B.; Sotin, Christophe; Stephan, Katrin; Dalle Ore, Cristina M.

2016-06-01

The spectral position of the 3.6 μm continuum peak measured on Cassini-VIMS I/F spectra is used as a marker to infer the temperature of the regolith particles covering the surfaces of Saturn's icy satellites. This feature is characterizing the crystalline water ice spectrum which is the dominant compositional endmember of the satellites' surfaces. Laboratory measurements indicate that the position of the 3.6 μm peak of pure water ice is temperature-dependent, shifting towards shorter wavelengths when the sample is cooled, from about 3.65 μm at T=123 K to about 3.55 μm at T=88 K. A similar method was already applied to VIMS Saturn's rings mosaics to retrieve ring particles temperature (Filacchione, G., Ciarniello, M., Capaccioni, F., et al., 2014. Icarus, 241, 45-65). We report here about the daytime temperature variations observed on the icy satellites as derived from three different VIMS observation types: (a) a sample of 240 disk-integrated I/F observations of Saturn's regular satellites collected by VIMS during years 2004-2011 with solar phase in the 20°-40° range, corresponding to late morning-early afternoon local times. This dataset is suitable to exploit the temperature variations at hemispherical scale, resulting in average temperature T <88 K for Mimas, T ≪88 K for Enceladus, T <88 K for Tethys, T=98-118 K for Dione, T=108-128 K for Rhea, T=118-128 K for Hyperion, T=128-148 and T > 168 K for Iapetus' trailing and leading hemispheres, respectively. A typical ±5 K uncertainty is associated to the temperature retrieval. On Tethys and Dione, for which observations on both leading and trailing hemispheres are available, in average daytime temperatures higher of about 10 K on the trailing than on the leading hemisphere are inferred. (b) Satellites disk-resolved observations taken at 20-40 km pixel-1 resolution are suitable to map daytime temperature variations across surfaces' features, such as Enceladus' tiger stripes and Tethys' equatorial dark lens. These datasets allow to disentangle solar illumination conditions from temperature distribution when observing surface's features with strong thermal contrast. (c) Daytime average maps covering large regions of the surfaces are used to compare the inferred temperature with geomorphological features (impact craters, chasmatae, equatorial radiation lenses and active areas) and albedo variations. Temperature maps are built by mining the complete VIMS dataset collected in years 2004-2009 (pre-equinox) and in 2009-2012 (post equinox) by selecting pixels with max 150 km pixel-1 resolution. VIMS-derived temperature maps allow to identify thermal anomalies across the equatorial lens of Mimas and Tethys. A temperature T > 115K is measured above Enceladus' Damascus and Alexandria sulci in the south pole region. VIMS has the sensitivity to follow seasonal temperature changes: on Tethys, Dione and Rhea higher temperature are measured above the south hemisphere during pre-equinox and above the north hemisphere during post-equinox epochs. The measured temperature distribution appears correlated with surface albedo features: in fact temperature increases on low albedo units located on Tethys, Dione and Rhea trailing hemispheres. The thermal anomaly region on Rhea's Inktomi crater detected by CIRS (Howett, C. J. A., Spencer, J. R., Hurford, T., et al., 2014. Icarus, 241, 239-247) is confirmed by VIMS: this area appears colder with respect to surrounding terrains when observed at the same local solar time.

Triple Plate Mold Final Report: Optimization of the Mold Design and Casting Parameters for a Thin U-10mo Fuel Casting

DOE Office of Scientific and Technical Information (OSTI.GOV)

Aikin, Jr., Robert M.

This work describes the experiments and modeling that have been performed to improve and try to optimize the simultaneous casting of three plates of U-10wt%Mo in a single coil vacuum induction melting (VIM) furnace. The plates of interest are 280 mm wide by 203 mm tall by 5 mm thick (11" x 8" x 0.2"). The initial mold design and processing parameters were supplied by Y-12. The mold and casting cavity were instrumented with a number of thermocouples, and the casting performed to determine the thermal history of the mold and casting. The resulting cast plates were radiographed and numerousmore » defects identified. Metallography was performed to help identify the nature of the radiographically observed defects. This information was then used to validate a mold filling and solidification model of that casting. Based on the initial casting, good casting design practice, and process simulation of several design alternatives, a revised design was developed with the goal of minimizing casting defects such as porosity. The redesigned mold had a larger hot-top and had its long axis along the horizontal direction. These changes were to try to develop a strong thermal gradient conducive to good feeding and minimization of micro- and macroporosity in the cast plates. An instrumented casting was then performed with the revised mold design and a linear distributor. This design yielded cast plates with significantly less radiographically identified defects. Unfortunately, there was significant variation in plate weight and metal content in their hot-tops. Fluid flow simulations were then performed on this mold/distributor design. This helped identify the issue with this linear distributor design. Additional simulations were then performed on candidate distributor redesigns and a preferred distributor annular design was identified. This improved annular design was used to produce a third instrumented casting with favorable results. These refined designs and their radiographic characterization are compared to the initial design.« less

Ultra-high vacuum compatible preparation chain for intermetallic compounds

NASA Astrophysics Data System (ADS)

Bauer, A.; Benka, G.; Regnat, A.; Franz, C.; Pfleiderer, C.

2016-11-01

We report the development of a versatile material preparation chain for intermetallic compounds, which focuses on the realization of a high-purity growth environment. The preparation chain comprises an argon glovebox, an inductively heated horizontal cold boat furnace, an arc melting furnace, an inductively heated rod casting furnace, an optically heated floating-zone furnace, a resistively heated annealing furnace, and an inductively heated annealing furnace. The cold boat furnace and the arc melting furnace may be loaded from the glovebox by means of a load-lock permitting to synthesize compounds starting with air-sensitive elements while handling the constituents exclusively in an inert gas atmosphere. All furnaces are all-metal sealed, bakeable, and may be pumped to ultra-high vacuum. We find that the latter represents an important prerequisite for handling compounds with high vapor pressure under high-purity argon atmosphere. We illustrate the operational aspects of the preparation chain in terms of the single-crystal growth of the heavy-fermion compound CeNi2Ge2.

Electromagnetic containerless undercooling facility and experiments for the Shuttle

NASA Technical Reports Server (NTRS)

Frost, R. T.; Flemings, M. C.; Szekely, J.; El-Kaddah, N.; Shiohara, Y.

1984-01-01

An electromagnetic furnace is being prepared for flights aboard the Space Shuttle. This apparatus is capable of melting metals and alloys up to 1400 C melting point by induction heating with subsequent solidification of the freely levitated melt without contact with any container. The solidification can be carried out with greatly reduced fields resulting in minimal heating and stirring of the free melt. Sequential specimens can be processed during flight. Several experiments are planned for a series of flights, beginning in 1985 with an undercooling experiment of NiSn alloys. These will be interspersed with detailed studies of fluid flow caused by low and high field levels in order to quantify the corresponding effect upon the solidification process.

Initiating the Validation of CCIM Processability for Multi-phase all Ceramic (SYNROC) HLW Form: Plan for Test BFY14CCIM-C

DOE Office of Scientific and Technical Information (OSTI.GOV)

Maio, Vince

This plan covers test BFY14CCIM-C which will be a first–of–its-kind demonstration for the complete non-radioactive surrogate production of multi-phase ceramic (SYNROC) High Level Waste Forms (HLW) using Cold Crucible Induction Melting (CCIM) Technology. The test will occur in the Idaho National Laboratory’s (INL) CCIM Pilot Plant and is tentatively scheduled for the week of September 15, 2014. The purpose of the test is to begin collecting qualitative data for validating the ceramic HLW form processability advantages using CCIM technology- as opposed to existing ceramic–lined Joule Heated Melters (JHM) currently producing BSG HLW forms. The major objectives of BFY14CCIM-C are tomore » complete crystalline melt initiation with a new joule-heated resistive starter ring, sustain inductive melting at temperatures between 1600 to 1700°C for two different relatively high conductive materials representative of the SYNROC ceramic formation inclusive of a HLW surrogate, complete melter tapping and pouring of molten ceramic material in to a preheated 4 inch graphite canister and a similar canister at room temperature. Other goals include assessing the performance of a new crucible specially designed to accommodate the tapping and pouring of pure crystalline forms in contrast to less recalcitrant amorphous glass, assessing the overall operational effectiveness of melt initiation using a resistive starter ring with a dedicated power source, and observing the tapped molten flow and subsequent relatively quick crystallization behavior in pans with areas identical to standard HLW disposal canisters. Surrogate waste compositions with ceramic SYNROC forming additives and their measured properties for inductive melting, testing parameters, pre-test conditions and modifications, data collection requirements, and sampling/post-demonstration analysis requirements for the produced forms are provided and defined.« less

Rolling element fatigue testing of gear materials

NASA Technical Reports Server (NTRS)

Nahm, A. H.

1978-01-01

Rolling element fatigue lives of nine alloys were evaluated in Rolling Contact (RC) rigs. Test conditions included a Hertzian stress at 4,826 MPa (700 ksi), a rolling speed of 6.23 m/sec (245 in/sec.). Tests were run with a Type I oil (MIL-L-7808G) at room temperature. B-10 lives (10% failure rate) of alloys were compared versus reference alloys, VIM-VAR AISI M-50 and VAR AISI 9310. Six case carburizing alloys (AISI 9310, CBS600, CBS1000M, EX00014, Vasco X-2 and EX00053) and three through-hardening alloys (AISI M-50, VascoMax 350 and Vasco Matrix 2 evaluated, showed RCF performance inferior or equivalent to that of AISI 9310 and AISI M-50. It was also found that the effects of vacuum melting processes, different tempering temperatures, freezing cycle during heat treating, shot peening, gold plating and chrome plating employed in the present investigation did not significantly affect RCF life.

Carbapenemase-Producing Enterobacteriaceae and Nonfermentative Bacteria, the Philippines, 2013-2016.

PubMed

Velasco, John Mark; Valderama, Maria Theresa; Peacock, Trent; Warawadee, Nirdnoy; Nogrado, Kathyleen; Navarro, Fatima Claire; Chua, Domingo; Apichai, Srijan; Sirigade, Ruekit; Macareo, Louis R; Swierczewski, Brett

2017-09-01

During 2013-2016, we isolated bla NDM - and bla VIM -harboring Enterobacteriaceae and nonfermentative bacteria from patients in the Philippines. Of 130 carbapenem-resistant isolates tested, 45 were Carba NP-positive; 43 harbored bla NDM , and 2 harbored bla VIM . Multidrug-resistant microbial pathogen surveillance and antimicrobial drug stewardship are needed to prevent further spread of New Delhi metallo-β-lactamase variants.

Galilean Satellite Surface Non-Ice Constituents: New Results from the Cassini/Huygens VIMS Jupiter Flyby in the Context of the Galileo NIMS Results

NASA Technical Reports Server (NTRS)

McCord, T. B.; Brown, R.; Baines, K.; Bellucci, G.; Bibring, J.-P.; Buratti, B.; Capaccioni, F.; Cerroni, P.; Clark, R.; Coradini, A.

2001-01-01

The Cassini mission Visible and Infrared Mapping Spectrometer (VIMS) is currently returning data for the Galilean satellites. Examples of the new satellite data and the initial interpretations will be presented in the context of the Galileo NIMS data and results. Additional information is contained in the original extended abstract.

Cold crucible levitation melting of biomedical Ti-30 wt%Ta alloy.

PubMed

Fukui, H; Yang, W; Yamada, S; Fujishiro, Y; Morita, A; Niinomi, M

2001-06-01

Recently, titanium-tantalum alloys have been studied as implant materials for dental and orthopedic surgery. However, titanium and tantalum are difficult to mix by common arc melting and induction melting, because of their high melting point and the marked difference between their densities (Ti: 1,680 degrees C, 4.5 g/cm3, Ta: 2,990 degrees C, 16.6 g/cm3). Thus, the Cold Crucible Levitation Melting (CCLM) method was chosen to produce a Ti-30 wt%Ta binary alloy in the present study. The CCLM furnace, with 1 kg capacity, consisted of a water-cooled crucible comprising oxygen-free high purity copper segments and coils wrapped around the crucible and connected to a frequency inverter power supply. A qualified ingot of 1.0 kg of Ti-30 wt%Ta alloy was obtained. The ingot was characterized from the surface quality, chemical composition distribution and microstructure, and finally the melting process was discussed.

Fecal Carriage of Carbapenemase-Producing Enterobacteriaceae: a Hidden Reservoir in Hospitalized and Nonhospitalized Patients

PubMed Central

Gijón, Desirèe; Curiao, Tânia; Baquero, Fernando; Coque, Teresa M.

2012-01-01

Fecal carriage of carbapenemase-producing Enterobacteriaceae (CPE) has not been extensively investigated, except in the cases of selected patients at risk, mostly during outbreaks. A total of 1,100 fecal samples randomly collected in our institution in two different periods in 2006 (n = 600) and 2009–2010 (n = 500) from hospitalized (26.8%) and nonhospitalized (73.2%) patients were screened for CPE. The first period coincided with an outbreak of VIM-1-producing Enterobacteriaceae, and the second one coincided with the emergence of KPC enzymes in our hospital. Diluted samples in saline were cultured in Luria-Bertani broth with 1 μg/ml imipenem and subcultured in MacConkey agar plates with 4 μg/ml ceftazidime. Growing colonies were screened for CPE (modified Hodge test and EDTA and boronic acid synergy tests). Carbapenemase genes, plasmids in which they are located, and clonal relatedness were determined. Individuals who exhibited fecal carriage of CPE (11/1,043, 1.1%; 95% confidence interval [CI], 0.53 to 1.88) included 8 hospitalized (carriage rate, 2.9%; 95% CI, 1.24 to 5.55) and 3 nonhospitalized patients (carriage rate, 0.4%; 95% CI, 0.08 to 1.14), the latter being identified in 2009. Eighty-two percent of colonized patients were not infected with CPE. Isolates harboring blaVIM-1 with or without blaSHV-12 were identified as Klebsiella pneumoniae (n = 8; ST39, ST688, ST253, and ST163), Enterobacter cloacae (n = 3; two pulsed-field gel electrophoresis [PFGE] types), Escherichia coli (n = 2; ST155 and ST2441), and Citrobacter freundii (n = 1). Some of these lineages had previously been detected in our institution. The blaVIM-1 gene was a member of the class 1 integrons In110 (blaVIM-1-aacA4-aadA1) and In113 (blaVIM-1-aacA4-dhfrII) located on plasmids IncN (n = 11; 30 to 50 kb) and IncHI2 (n = 3; 300 kb), respectively. Dissemination of blaVIM-1 class-1 integrons within highly transferable plasmids in a polyclonal population has potentially contributed to the maintenance and spread of CPE. PMID:22403422

Glaucomatous patterns in Frequency Doubling Technology (FDT) perimetry data identified by unsupervised machine learning classifiers.

PubMed

Bowd, Christopher; Weinreb, Robert N; Balasubramanian, Madhusudhanan; Lee, Intae; Jang, Giljin; Yousefi, Siamak; Zangwill, Linda M; Medeiros, Felipe A; Girkin, Christopher A; Liebmann, Jeffrey M; Goldbaum, Michael H

2014-01-01

The variational Bayesian independent component analysis-mixture model (VIM), an unsupervised machine-learning classifier, was used to automatically separate Matrix Frequency Doubling Technology (FDT) perimetry data into clusters of healthy and glaucomatous eyes, and to identify axes representing statistically independent patterns of defect in the glaucoma clusters. FDT measurements were obtained from 1,190 eyes with normal FDT results and 786 eyes with abnormal FDT results from the UCSD-based Diagnostic Innovations in Glaucoma Study (DIGS) and African Descent and Glaucoma Evaluation Study (ADAGES). For all eyes, VIM input was 52 threshold test points from the 24-2 test pattern, plus age. FDT mean deviation was -1.00 dB (S.D. = 2.80 dB) and -5.57 dB (S.D. = 5.09 dB) in FDT-normal eyes and FDT-abnormal eyes, respectively (p<0.001). VIM identified meaningful clusters of FDT data and positioned a set of statistically independent axes through the mean of each cluster. The optimal VIM model separated the FDT fields into 3 clusters. Cluster N contained primarily normal fields (1109/1190, specificity 93.1%) and clusters G1 and G2 combined, contained primarily abnormal fields (651/786, sensitivity 82.8%). For clusters G1 and G2 the optimal number of axes were 2 and 5, respectively. Patterns automatically generated along axes within the glaucoma clusters were similar to those known to be indicative of glaucoma. Fields located farther from the normal mean on each glaucoma axis showed increasing field defect severity. VIM successfully separated FDT fields from healthy and glaucoma eyes without a priori information about class membership, and identified familiar glaucomatous patterns of loss.

Carbamylation of vimentin is inducible by smoking and represents an independent autoantigen in rheumatoid arthritis

PubMed Central

Ospelt, Caroline; Bang, Holger; Feist, Eugen; Camici, Giovanni; Keller, Stephan; Detert, Jacqueline; Krämer, Anette; Gay, Steffen; Ghannam, Khetam; Burmester, Gerd R

2017-01-01

Objectives Smoking has been connected to citrullination of antigens and formation of anti-citrullinated peptide antibodies (ACPAs) in rheumatoid arthritis (RA). Since smoking can modify proteins by carbamylation (formation of homocitrulline), this study was conducted to investigate these effects on vimentin in animal models and RA. Methods The efficiency of enzymatic carbamylation of vimentin was characterised. B-cell response was investigated after immunisation of rabbits with different vimentin isoforms. Effects of tobacco smoke exposure on carbamylation of vimentin and formation of autoantibodies were analysed in mice. The antibody responses against isoforms of vimentin were characterised with respect to disease duration and smoking status of patients with RA. Results Enzymatic carbamylation of vimentin was efficiently achieved. Subsequent citrullination of vimentin was not disturbed by homocitrullination. Sera from rabbits immunised with carbamylated vimentin (carbVim), in addition to carbVim also recognised human IgG-Fc showing rheumatoid factor-like reactivity. Smoke-exposed mice contained detectable amounts of carbVim and developed a broad immune response against carbamylated antigens. Although the prevalence of anti-carbamylated antibodies in smokers and non-smokers was similar, the titres of carbamylated antibodies were significantly increased in sera of smoking compared with non-smoking RA. CarbVim antibodies were observed independently of ACPAs in early phases of disease and double-positive patients for anti-mutated citrullinated vimentin (MCV) and anti-carbVim antibodies showed an extended epitope recognition pattern towards MCV. Conclusions Carbamylation of vimentin is inducible by cigarette smoke exposure. The polyclonal immune response against modified antigens in patients with RA is not exclusively citrulline-specific and carbamylation of antigens could be involved in the pathogenesis of disease. Trial registration number ISRCTN36745608; EudraCT Number: 2006-003146-41. PMID:28183721

Postnatal neurogenesis in the cow pineal gland: an immunohistochemical study.

PubMed

Gómez Esteban, M B; Muñoz Mosqueira, M I; Arroyo, A A; Muñoz Barragán, L

2013-03-01

In the pineal gland of cows and rats structures designated rosettes have been described both during embryonic development and in adult animals. In order to investigate the possible nature of the cells comprising such structures, in the present work we studied the pineal glands from 10 cows of one- or four-years-old using conventional immunocytochemical and confocal microscopy techniques. As markers of glial cells, we used anti-vimentin (Vim) and glial fibrillary acidic protein (GFAP) and anti-S-100 sera, and the pinealocytes were labelled with β-III tubulin. As a marker of stem cells, we used an antinestin serum, while an anti-PCNA serum was employed to label proliferating cells. To explore the neuronal nature of some cells of the rosettes, we used an anti-SRIF serum. The rosettes were seen to be present throughout the glandular parenchyma and displayed a central cavity surrounded by cells, most of which expressed all or just some of the above glial labels and nestin, although there were also some rosettes with cells that expressed β-III tubulin and other cells that expressed SRIF. Likewise, in the cells of the rosettes the cell nucleus showed strong expression of PCNA. Confocal microscopy revealed that the walls of the rosettes contained cells that coexpressed Vim/S-100, Vim/GFAP and Vim/nestin. The number of rosettes was significantly greater in the animals of one year of age with respect to the four-year-old cows. The present findings allow us to suggest that rosettes are evolving structures and that most of the cells present in their walls should be considered stem cells, and hence responsible for the postnatal neurogenesis occurring in the pineal gland of cows.

High-Resolution Analysis by Whole-Genome Sequencing of an International Lineage (Sequence Type 111) of Pseudomonas aeruginosa Associated with Metallo-Carbapenemases in the United Kingdom.

PubMed

Turton, Jane F; Wright, Laura; Underwood, Anthony; Witney, Adam A; Chan, Yuen-Ting; Al-Shahib, Ali; Arnold, Catherine; Doumith, Michel; Patel, Bharat; Planche, Timothy D; Green, Jonathan; Holliman, Richard; Woodford, Neil

2015-08-01

Whole-genome sequencing (WGS) was carried out on 87 isolates of sequence type 111 (ST-111) of Pseudomonas aeruginosa collected between 2005 and 2014 from 65 patients and 12 environmental isolates from 24 hospital laboratories across the United Kingdom on an Illumina HiSeq instrument. Most isolates (73) carried VIM-2, but others carried IMP-1 or IMP-13 (5) or NDM-1 (1); one isolate had VIM-2 and IMP-18, and 7 carried no metallo-beta-lactamase (MBL) gene. Single nucleotide polymorphism analysis divided the isolates into distinct clusters; the NDM-1 isolate was an outlier, and the IMP isolates and 6/7 MBL-negative isolates clustered separately from the main set of 73 VIM-2 isolates. Within the VIM-2 set, there were at least 3 distinct clusters, including a tightly clustered set of isolates from 3 hospital laboratories consistent with an outbreak from a single introduction that was quickly brought under control and a much broader set dominated by isolates from a long-running outbreak in a London hospital likely seeded from an environmental source, requiring different control measures; isolates from 7 other hospital laboratories in London and southeast England were also included. Bayesian evolutionary analysis indicated that all the isolates shared a common ancestor dating back ∼50 years (1960s), with the main VIM-2 set separating approximately 20 to 30 years ago. Accessory gene profiling revealed blocks of genes associated with particular clusters, with some having high similarity (≥95%) to bacteriophage genes. WGS of widely found international lineages such as ST-111 provides the necessary resolution to inform epidemiological investigations and intervention policies. Copyright © 2015, American Society for Microbiology. All Rights Reserved.

Saturn's Regional and Global Cloud Properties from Cassini/VIMS 4.5-5.1 Micron Spectroscopy

NASA Astrophysics Data System (ADS)

Fletcher, Leigh N.; Baines, K. H.; Momary, T. W.; Orton, G. S.; Roos-Serote, M.; Irwin, P. G. J.

2009-09-01

Exploiting a region of Saturn's thermal-IR spectrum between 4.5-5.1 microns where there is a dearth of opacity sources, Cassini/VIMS has revealed a wealth of dynamical phenomena in the 1-4 bar region that are transforming our understanding of the gas giant. Narrow dark lanes and discrete cloud features are observed in silhouette against the 5-micron background thermal glow of Saturn's deep atmosphere. The NEMESIS optimal-estimation retrieval algorithm (Irwin et al., JSQRT, 2008) is used to model the 4.5-5.1 micron region using the correlated-k approximation. We determine (a) the sensitivity and correlations associated with determinations of cloud properties and gaseous composition from the Cassini/VIMS dataset; (b) the meridional variation in opacity sources (a multi-layer cloud model, the abundances of phosphine and arsine); (c) the contribution of the thermal and reflected components to VIMS spectra and (d) the spatial variability of opacity sources associated with Saturn's string of pearls and ribbon wave features in the northern hemisphere. The meridional gradients in composition are compared to the Cassini/CIRS derivations of phosphine at higher altitudes (pressures less than 1 bar; Fletcher et al., Icarus, 2009). The seasonal origin of the north-south asymmetry in 5-micron opacity (Baines et al., BAAS, 2006) and the dynamical motions associated with Saturn's complex zonal wave activity will be discussed. The vertical distribution of cloud opacity demonstrates the necessity for aerosols at the 2-3 bar level to successfully replicate the VIMS data. Finally, we search Cassini/CIRS mapping observations at 15.0 cm-1 resolution for mid-IR counterparts (0.1-0.5 bar) to the zonal wave activity in the deeper troposphere (1-4 bars) to investigate the vertical coupling in Saturn's troposphere.

Clouds and Hazes in Saturn's Troposphere and Stratosphere

NASA Astrophysics Data System (ADS)

Merlet, Cecile; Irwin, P.; Fletcher, L.

2012-10-01

We present new results from the analysis of Saturn's near-infrared spectra measured with the Visual and Infrared Mapping Spectrometer (VIMS) instrument on the Cassini orbiter. VIMS near-infrared data are particularly relevant for the study of clouds and hazes in the troposphere and stratosphere of Saturn. Thermal emission in the 4.5-5.1 wavelength range is absorbed and scattered mainly by tropospheric clouds and radiatively active gases. The vertical structure as well as the optical and physical properties of tropospheric aerosols are obtained from Saturn's thermal emission spectra by using the retrieval algorithm Nemesis. The distribution of tropospheric phosphine and ammonia in gas phase will also be presented here. We managed to break the degeneracies inherent to the retrieval problem by analysing Saturn's thermal emission simultaneously at various viewing geometries. By using this method, we found that VIMS spectra at 4.5-5.1 microns are also sensitive to the hazes formed above the cloud layers. Saturn's reflected sunlight spectra at 0.8-3.5 microns measured with VIMS were also analysed in order to constrain the haze properties in the upper troposphere and lower stratosphere of the planet. Results from both the 0.8-3.5 and 4.5-5.1 wavelength ranges were combined to determine the cloud and haze model most consistent with VIMS spectroscopy over a wide range of viewing geometries and lighting conditions. An increase of temperature below the tropopause, often referred to as the temperature knee, was retrieved from Cassini/CIRS spectra. Seasonal variations of the knee and haze structure are compared, and as a result the assumption of local heating by the hazes to explain this feature will be discussed.

Superselective Thalamotomy in the Most Lateral Part of the Ventralis Intermedius Nucleus for Controlling Essential and Parkinsonian Tremor.

PubMed

Hirato, Masafumi; Miyagishima, Takaaki; Takahashi, Akio; Yoshimoto, Yuhei

2018-01-01

The minimum and essential thalamic areas for reducing tremor were investigated in cases treated by superselective thalamotomy in the most lateral part of the ventralis intermedius nucleus (mlp-VIM). Stereotactic superselective VIM thalamotomy with depth microrecording was performed in 21 patients with essential tremor (ET) and 15 patients with tremor-dominant Parkinson disease (PD). A very small and narrow (axial plane) therapeutic lesion was formed as a square on the sagittal plane and inverse V on the axial plane in the mlp-VIM, which covered the kinesthetic response area topographically related to tremor. Patients with ET were followed up for 4.7 ± 3.0 years and patients with PD for 7.9 ± 3.9 years. Almost complete tremor control was achieved in all patients immediately after surgery and continued for up to 8 years. A few adverse events were recognized but disappeared within 1 month without 1 patient with thalamic hemorrhage. The medial border of the therapeutic lesion was significantly more lateral in both patients with ET and patients with PD than the calculated standard target point and was in patients with PD than in patients with ET. The mean width was only about 2.4 mm. The individual differences of the adequate location of the therapeutic lesion were significantly greater in the ET than in the PD group. The important area for reducing tremor was small and narrow and was located in the mlp-VIM, where the proprioceptive ascending signals from the tremor-dominant body part are conducted. Superselective thalamotomy in the mlp-VIM was safe and effective for the long-term in patients with ET and PD. Copyright © 2017 Elsevier Inc. All rights reserved.

Detection of NDM-2-producing Acinetobacter baumannii and VIM-producing Pseudomonas aeruginosa in Palestine.

PubMed

Sjölander, Isabella; Hansen, Frank; Elmanama, Abdelraouf; Khayyat, Rasha; Abu-Zant, Alaeddin; Hussein, Ayman; Taha, Adham Abu; Hammerum, Anette M; Ciofu, Oana

2014-06-01

The aim of this study was to screen for carbapenem-resistant Gram-negative bacteria in Palestine and subsequently to identify and investigate the mechanisms of resistance. For a period of 6 weeks, all Gram-negative isolates were collected from six Palestinian hospital laboratories and were tested for susceptibility using 10μg meropenem disks. Isolates showing resistance to meropenem were further investigated. The presence of carbapenemases was assessed by PCR. In addition, antimicrobial susceptibility testing, an efflux pump inhibitor assay and pulsed-field gel electrophoresis (PFGE) were performed. Isolates producing carbapenemases were further investigated by multilocus sequence typing (MLST). In total, 248 Gram-negative isolates were collected from the six laboratories. Among the 248 tested isolates, 15 Acinetobacter baumannii and 6 Pseudomonas aeruginosa were resistant to meropenem. One A. baumannii from Gaza produced NDM-2 and belonged to ST103. Thirteen of the carbapenem-resistant A. baumannii isolates possessed the intrinsic upregulated bla OXA-66 gene and one isolate carried bla OXA-51 . All but one of the OXA-66-producing A. baumannii belonged to ST2; the remaining isolate belonged to ST183. One of the carbapenem-resistant P. aeruginosa was classified as VIM-4-producing and three were VIM-2-producing isolates. The three VIM-2-producing isolates belonged to three new sequences types (ST1562, ST1563 and ST1564). All of the carbapenemase-producing isolates were multiresistant non-fermenters. To the best of our knowledge, this is the first report on NDM-producing A. baumannii and VIM-producing P. aeruginosa from Palestine. Copyright © 2013 International Society for Chemotherapy of Infection and Cancer. Published by Elsevier Ltd. All rights reserved.

Microstructure and magnetism of Co2FeAl Heusler alloy prepared by arc and induction melting compared with planar flow casting

NASA Astrophysics Data System (ADS)

Titov, A.; Jiraskova, Y.; Zivotsky, O.; Bursik, J.; Janickovic, D.

2018-04-01

This paper is devoted to investigations of the structural and magnetic properties of the Co2FeAl Heusler alloy produced by three technologies. The alloys prepared by arc and induction melting have resulted in coarse-grained samples in contrast to the fine-grained ribbon-type sample prepared by planar flow casting. Scanning electron microscopy completed by energy dispersive X-ray spectroscopy, X-ray diffraction, Mössbauer spectroscopy, and magnetic methods sensitive to both bulk and surface were applied. The chemical composition was slightly different from the nominal only for the ribbon sample. From the viewpoint of magnetic properties, the bulk coercivity and remnant magnetization have followed the structure influenced by the technology used. Saturation magnetization was practically the same for samples prepared by arc and induction melting, whereas the magnetization of ribbon is slightly lower due to a higher Al content at the expense of iron and cobalt. The surface magnetic properties were markedly influenced by anisotropy, grain size, and surface roughness of the samples. The surface roughness and brittleness of the ribbon-type sample did not make domain structure observation possible. The other two samples could be well polished and their highly smooth surface has enabled domain structure visualization by both magneto-optical Kerr microscopy and magnetic force microscopy.

Driving bubbles out of glass

NASA Technical Reports Server (NTRS)

Mattox, D. M.

1981-01-01

Surface tension gradient in melt forces gas bubbles to surface, increasing glass strength and transparency. Conventional chemical and buoyant fining are extremely slow in viscous glasses, but tension gradient method moves 250 um bubbles as rapidly as 30 um/s. Heat required for high temperature part of melt is furnished by stationary electrical or natural-gas heater; induction and laser heating are also possible. Method has many applications in industry processes.

Mechanism of corrosion of Ni base superalloys by molten Na2MoO4 at elevated temperatures

NASA Technical Reports Server (NTRS)

Misra, A. K.; Stearns, C. A.

1983-01-01

The corrosion of nickel base superalloy, U-700, by molten Na2MoO4 was studied in the temperature range of 750 deg to 950 deg C. After an induction period, the rate of corrosion is linear and catastrophic corrosion is observed. It is shown that the induction period is associated with the attainment of a minimum MoO3 activity in the melt, which corresponds to the equilibrium MoO3 activity for the reaction, 2MoO3(l) + Mo = 3MoO2(s). A mechanism is proposed to describe the catastrophic nature of corrosion, which involves transport of Ni++ through the melt resulting in formulation of NiO at the melt gas interface and basic fluxing of Cr2O3. The effect of the amount of Na2MoO4 on the corrosion kinetics was also studied. It is found that evaporation and the thermodynamic calculations for the Na2MoO4 - MoO3 system the activity of MoO3 is reduced considerably when dissolved in Na2MoO4, which causes a sharp decrease in the rate of evaporation of MoO3 from a Na2MoO4 - MoO3 melt.

Numerical simulation of the alloying process during impulse induction heating of the metal substrate

NASA Astrophysics Data System (ADS)

Popov, V. N.

2017-10-01

2D numerical modeling of the processes during the alloying of the substrate surface metal layer is carried out. Heating, phase transition, heat and mass transfer in the molten metal, solidification of the melt are considered with the aid the proposed mathematical model. Under study is the applicability of the high-frequency electromagnetic field impulse for metal heating and melting. The distribution of the electromagnetic energy in the metal is described by empirical formulas. According to the results of numerical experiments, the flow structure in the melt and distribution of the alloying substances is evaluated.

Solidification processing of intermetallic Nb-Al alloys

NASA Technical Reports Server (NTRS)

Smith, Preston P.; Oliver, Ben F.; Noebe, Ronald D.

1992-01-01

Several Nb-Al alloys, including single-phase NbAl3 and the eutectic of Nb2Al and NbAl3, were prepared either by nonconsumable arc melting in Ar or by zone processing in He following initial induction melting and rod casting, and the effect of the solidification route on the microstructure and room-temperature mechanical properties of these alloys was investigated. Automated control procedures and melt conditions for directional solidification of NbAl3 and the Nb2Al/Nb3Al eutectic were developed; high purity and stoichiometry were obtained. The effects of ternary additions of Ti and Ni are described.

[The induction current, an ideal resource for the smelting of dental alloys].

PubMed

Ionescu, G; Chiper, C; Teofănescu, L; Brezulianu, C

1996-01-01

The authors present an electrical furnace for melting dental alloys, made by the German company BEGO. This furnace uses electrical current of high frequency. The advantages of this melting method are the possibility of controlling the adequate melting temperature for a specific type of alloy, the fusion in a protective environment of rare gas and casting by associating the centrifugation with the vacuum. This leads to exact castings without any defects. The authors describe as a personal contribution an external cooling system capable of maintaining the furnace's parameters even when the water pressure is low.

Carbapenemase-Producing Enterobacteriaceae and Nonfermentative Bacteria, the Philippines, 2013–2016

PubMed Central

Valderama, Maria Theresa; Peacock, Trent; Warawadee, Nirdnoy; Nogrado, Kathyleen; Navarro, Fatima Claire; Chua, Domingo; Apichai, Srijan; Sirigade, Ruekit; Macareo, Louis R.; Swierczewski, Brett

2017-01-01

During 2013–2016, we isolated blaNDM- and blaVIM-harboring Enterobacteriaceae and nonfermentative bacteria from patients in the Philippines. Of 130 carbapenem-resistant isolates tested, 45 were Carba NP–positive; 43 harbored blaNDM, and 2 harbored blaVIM. Multidrug-resistant microbial pathogen surveillance and antimicrobial drug stewardship are needed to prevent further spread of New Delhi metallo-β-lactamase variants. PMID:28820383

The Use of Withaferin A to Study Intermediate Filaments.

PubMed

Mohan, Royce; Bargagna-Mohan, Paola

2016-01-01

Withaferin A (WFA), initially identified as a compound that inhibits experimental angiogenesis, has been shown to bind to soluble vimentin (sVim) and other type III intermediate filament (IF) proteins. We review WFA's dose-related activities (Section 1), examining nanomolar concentrations effects on sVim in cell proliferation and submicromolar effects on lamellipodia and focal adhesion formation. WFA effects on polymeric IFs are especially interesting to the study of cell migration and invasion that depend on IF mechanical contractile properties. WFA interferes with NF-κB signaling, though this anti-inflammatory mechanism may occur via perturbation of sVim-protein complexes, and possibly also via targeting IκB kinase β directly. However, micromolar concentrations that induce vimentin cleavage to promote apoptosis may increasingly show off-target effects via targeting other IFs (neurofilaments and keratin) and non-IFs (tubulin, heat-shock proteins, proteasome). Thus, in Section 2, we describe our studies combining cell cultures with animal models of injury to validate relevant type III IF-targeting mechanisms of WFA. In Section 3, we illuminate from investigating myofibroblast differentiation how sVim phosphorylation may govern cell type-selective sensitivity to WFA, offering impetus for exploring vimentin phosphorylation isoforms as targets and biomarkers of fibrosis. These different WFA targets and activities are listed in a summary table. Copyright © 2016 Elsevier Inc. All rights reserved.

Dissemination of metallo-β-lactamase-producing Pseudomonas aeruginosa of sequence type 235 in Asian countries.

PubMed

Kim, Moon Jung; Bae, Il Kwon; Jeong, Seok Hoon; Kim, So Hyun; Song, Jae Hoon; Choi, Jae Young; Yoon, Sang Sun; Thamlikitkul, Visanu; Hsueh, Po-Ren; Yasin, Rohani Md; Lalitha, M K; Lee, Kyungwon

2013-12-01

To investigate the epidemiological traits of metallo-β-lactamase (MBL)-producing Pseudomonas aeruginosa (MPPA) clinical isolates collected by the Asian Network for Surveillance of Resistant Pathogens (ANSORP). A total of 16 MPPA clinical isolates were collected from six Asian countries in 2000 to 2009 by ANSORP. The MBL gene was detected by PCR amplification. The genetic organization of the class 1 integron carrying the MBL gene cassette was investigated by PCR mapping and sequencing. Southern blotting, repetitive sequence-based PCR and multilocus sequence typing (MLST) experiments were performed to characterize the isolates. PCR and sequencing experiments detected the blaVIM-2 (n = 12), blaVIM-3 (n = 1), blaIMP-6 (n = 2) and blaIMP-26 (n = 1) genes. The MBL genes were located on the chromosome in all isolates except one. Furthermore, all the MBL genes were located in a class 1 integron. All the MPPA isolates from Malaysia, Thailand, Sri Lanka and Korea were identified as sequence type (ST) 235 by MLST. Three VIM-2-producing isolates from India were identified as ST773, and one isolate harbouring VIM-3 from Taiwan was identified as ST298. P. aeruginosa ST235 might play a role in dissemination of MBL genes in Asian countries.

An Examination of Drag Reduction Mechanisms in Marine Animals, with Potential Applications to Uninhabited Aerial Vehicles

NASA Technical Reports Server (NTRS)

Musick, John A.; Patterson, Mark R.; Dowd, Wesley W.

2002-01-01

Previous engineering research and development has documented the plausibility of applying biomimetic approaches to aerospace engineering. Past cooperation between the Virginia Institute of Marine Science (VIMS) and NASA focused on the drag reduction qualities of the microscale dermal denticles of shark skin. This technology has subsequently been applied to submarines and aircraft. The present study aims to identify and document the three-dimensional geometry of additional macroscale morphologies that potentially confer drag reducing hydrodynamic qualities upon marine animals and which could be applied to enhance the range and endurance of Uninhabited Aerial Vehicles (UAVs). Such morphologies have evolved over eons to maximize organismal energetic efficiency by reducing the energetic input required to maintain cruising speeds in the viscous marine environment. These drag reduction qualities are manifested in several groups of active marine animals commonly encountered by ongoing VIMS research programs: namely sharks, bony fishes such as tunas, and sea turtles. Through spatial data acquired by molding and digital imagery analysis of marine specimens provided by VIMS, NASA aims to construct scale models of these features and to test these potential drag reduction morphologies for application to aircraft design. This report addresses the efforts of VIMS and NASA personnel on this project between January and November 2001.

ARO - Terrestrial Research Program, Methodologies and Protocols for Characterization of Geomaterials

DTIC Science & Technology

2015-05-14

of ice involves melting, digestion, and analysis using inductively coupled plasma – mass spectrometry (ICPMS). ICP-MS analysis established elemental...4] have distinct chemical compositions. Knowledge of the chemical composition of the mineral assemblage present in a rock is critical to...activation analysis (INAA), to inductively-coupled plasma analysis and mass spectrometry (ICP & ICP-MS), mass spectrometry (MS), and laser-ablation

Synthesis of Lithium Metal Oxide Nanoparticles by Induction Thermal Plasmas.

PubMed

Tanaka, Manabu; Kageyama, Takuya; Sone, Hirotaka; Yoshida, Shuhei; Okamoto, Daisuke; Watanabe, Takayuki

2016-04-06

Lithium metal oxide nanoparticles were synthesized by induction thermal plasma. Four different systems-Li-Mn, Li-Cr, Li-Co, and Li-Ni-were compared to understand formation mechanism of Li-Me oxide nanoparticles in thermal plasma process. Analyses of X-ray diffractometry and electron microscopy showed that Li-Me oxide nanoparticles were successfully synthesized in Li-Mn, Li-Cr, and Li-Co systems. Spinel structured LiMn₂O₄ with truncated octahedral shape was formed. Layer structured LiCrO₂ or LiCoO₂ nanoparticles with polyhedral shapes were also synthesized in Li-Cr or Li-Co systems. By contrast, Li-Ni oxide nanoparticles were not synthesized in the Li-Ni system. Nucleation temperatures of each metal in the considered system were evaluated. The relationship between the nucleation temperature and melting and boiling points suggests that the melting points of metal oxides have a strong influence on the formation of lithium metal oxide nanoparticles. A lower melting temperature leads to a longer reaction time, resulting in a higher fraction of the lithium metal oxide nanoparticles in the prepared nanoparticles.

Inductive detection of the free surface of liquid metals

NASA Astrophysics Data System (ADS)

Zürner, Till; Ratajczak, Matthias; Wondrak, Thomas; Eckert, Sven

2017-11-01

A novel measurement system to determine the surface position and topology of liquid metals is presented. It is based on the induction of eddy currents by a time-harmonic magnetic field and the subsequent measurement of the resulting secondary magnetic field using gradiometric induction coils. The system is validated experimentally for static and dynamic surfaces of the low-melting liquid metal alloy gallium-indium-tin in a narrow vessel. It is shown that a precision below 1 mm and a time resolution of at least 20 Hz can be achieved.

Inhibiting the VIM-2 Metallo-β-Lactamase by Graphene Oxide and Carbon Nanotubes.

PubMed

Huang, Po-Jung Jimmy; Pautler, Rachel; Shanmugaraj, Jenitta; Labbé, Geneviève; Liu, Juewen

2015-05-13

Metallo-β-lactamases (MBLs) degrade a broad spectrum of antibiotics including the latest carbapenems. So far, limited success has been achieved in developing its inhibitors using small organic molecules. VIM-2 is one of the most studied and important MBLs. In this work, we screened 10 nanomaterials, covering a diverse range of surface properties including charge, hydrophobicity, and specific chemical bonding. Among these, graphene oxide and carbon nanotubes are the most potent inhibitors, while most other materials do not show much inhibition effect. The inhibition is noncompetitive and is attributed to the hydrophobic interaction with the enzyme. Adsorption of VIM-2 was further probed using protein displacement assays where it cannot displace or be displaced by bovine serum albumin (BSA). This information is useful for rational design inhibitors for MBLs and more specific inhibition might be achieved by further surface modifications on these nanocarbons.

Bearing and gear steels for aerospace applications

NASA Technical Reports Server (NTRS)

Zaretsky, Erwin V.

1990-01-01

Research in metallurgy and processing for bearing and gear steels has resulted in improvements in rolling-element bearing and gear life for aerospace application by a factor of approximately 200 over that obtained in the early 1940's. The selection and specification of a bearing or gear steel is dependent on the integration of multiple metallurgical and physical variables. For most aerospace bearings, through-hardened VIM-VAR AISI M-50 steel is the material of preference. For gears, the preferential material is case-carburized VAR AISI 9310. However, the VAR processing for this material is being replaced by VIM-VAR processing. Since case-carburized VIM-VAR M-50NiL incorporates the desirable qualities of both the AISI M-50 and AISI 9310 materials, optimal life and reliability can be achieved in both bearings and gears with a single steel. Hence, this material offers the promise of a common steel for both bearings and gears for future aerospace applications.

Global-scale surface spectral variations on Titan seen from Cassini/VIMS

USGS Publications Warehouse

Barnes, J.W.; Brown, R.H.; Soderblom, L.; Buratti, B.J.; Sotin, Christophe; Rodriguez, S.; Le, Mouelic S.; Baines, K.H.; Clark, R.; Nicholson, P.

2007-01-01

We present global-scale maps of Titan from the Visual and Infrared Mapping Spectrometer (VIMS) instrument on Cassini. We map at 64 near-infrared wavelengths simultaneously, covering the atmospheric windows at 0.94, 1.08, 1.28, 1.6, 2.0, 2.8, and 5 ??m with a typical resolution of 50 km/pixel or a typical total integration time of 1 s. Our maps have five to ten times the resolution of ground-based maps, better spectral resolution across most windows, coverage in multiple atmospheric windows, and represent the first spatially resolved maps of Titan at 5 ??m. The VIMS maps provide context and surface spectral information in support of other Cassini instruments. We note a strong latitudinal dependence in the spectral character of Titan's surface, and partition the surface into 9 spectral units that we describe in terms of spectral and spatial characteristics. ?? 2006 Elsevier Inc. All rights reserved.

Comparison of form in potential functions while maintaining upright posture during exposure to stereoscopic video clips.

PubMed

Kutsuna, Kenichiro; Matsuura, Yasuyuki; Fujikake, Kazuhiro; Miyao, Masaru; Takada, Hiroki

2013-01-01

Visually induced motion sickness (VIMS) is caused by sensory conflict, the disagreement between vergence and visual accommodation while observing stereoscopic images. VIMS can be measured by psychological and physiological methods. We propose a mathematical methodology to measure the effect of three-dimensional (3D) images on the equilibrium function. In this study, body sway in the resting state is compared with that during exposure to 3D video clips on a liquid crystal display (LCD) and on a head mounted display (HMD). In addition, the Simulator Sickness Questionnaire (SSQ) was completed immediately afterward. Based on the statistical analysis of the SSQ subscores and each index for stabilograms, we succeeded in determining the quantity of the VIMS during exposure to the stereoscopic images. Moreover, we discuss the metamorphism in the potential functions to control the standing posture during the exposure to stereoscopic video clips.

Differential effects of deep brain stimulation on verbal fluency.

PubMed

Ehlen, Felicitas; Schoenecker, Thomas; Kühn, Andrea A; Klostermann, Fabian

2014-07-01

We aimed at gaining insights into principles of subcortical lexical processing. Therefore, effects of deep brain stimulation (DBS) in different target structures on verbal fluency (VF) were tested. VF was assessed with active vs. inactivated DBS in 13 and 14 patients with DBS in the vicinity of the thalamic ventral intermediate nucleus (VIM) and, respectively, of the subthalamic nucleus (STN). Results were correlated to electrode localizations in postoperative MRI, and compared to those of 12 age-matched healthy controls. Patients' VF performance was generally below normal. However, while activation of DBS in the vicinity of VIM provoked marked VF decline, it induced subtle phonemic VF enhancement in the vicinity of STN. The effects correlated with electrode localizations in left hemispheric stimulation sites. The results show distinct dependencies of VF on DBS in the vicinity of VIM vs. STN. Particular risks for deterioration occur in patients with relatively ventromedial thalamic electrodes. Copyright © 2014 Elsevier Inc. All rights reserved.

The effect of unilateral thalamic deep brain stimulation on the vocal dysfunction in a patient with spasmodic dysphonia: interrogating cerebellar and pallidal neural circuits.

PubMed

Poologaindran, Anujan; Ivanishvili, Zurab; Morrison, Murray D; Rammage, Linda A; Sandhu, Mini K; Polyhronopoulos, Nancy E; Honey, Christopher R

2018-02-01

Spasmodic dysphonia (SD) is a neurological disorder of the voice where a patient's ability to speak is compromised due to involuntary contractions of the intrinsic laryngeal muscles. Since the 1980s, SD has been treated with botulinum toxin A (BTX) injections into the throat. This therapy is limited by the delayed-onset of benefits, wearing-off effects, and repeated injections required every 3 months. In a patient with essential tremor (ET) and coincident SD, the authors set out to quantify the effects of thalamic deep brain stimulation (DBS) on vocal function while investigating the underlying motor thalamic circuitry. A 79-year-old right-handed woman with ET and coincident adductor SD was referred to our neurosurgical team. While primarily treating her limb tremor, the authors studied the effects of unilateral, thalamic DBS on vocal function using the Unified Spasmodic Dysphonia Rating Scale (USDRS) and voice-related quality of life (VRQOL). Since dystonia is increasingly being considered a multinodal network disorder, an anterior trajectory into the left thalamus was deliberately chosen such that the proximal contacts of the electrode were in the ventral oralis anterior (Voa) nucleus (pallidal outflow) and the distal contacts were in the ventral intermediate (Vim) nucleus (cerebellar outflow). In addition to assessing on/off unilateral thalamic Vim stimulation on voice, the authors experimentally assessed low-voltage unilateral Vim, Voa, or multitarget stimulation in a prospective, randomized, doubled-blinded manner. The evaluators were experienced at rating SD and were familiar with the vocal tremor of ET. A Wilcoxon signed-rank test was used to study the pre- and posttreatment effect of DBS on voice. Unilateral left thalamic Vim stimulation (DBS on) significantly improved SD vocal dysfunction compared with no stimulation (DBS off), as measured by the USDRS (p < 0.01) and VRQOL (p < 0.01). In the experimental interrogation, both low-voltage Vim (p < 0.01) and multitarget Vim + Voa (p < 0.01) stimulation were significantly superior to low-voltage Voa stimulation. For the first time, the effects of high-frequency stimulation of different neural circuits in SD have been quantified. Unexpectedly, focused Voa (pallidal outflow) stimulation was inferior to Vim (cerebellar outflow) stimulation despite the classification of SD as a dystonia. While only a single case, scattered reports exist on the positive effects of thalamic DBS on dysphonia. A Phase 1 pilot trial (DEBUSSY; clinical trial no. NCT02558634, clinicaltrials.gov) is underway at the authors' center to evaluate the safety and preliminary efficacy of DBS in SD. The authors hope that this current report stimulates neurosurgeons to investigate this new indication for DBS.

Optical measurement of high-temperature melt flow rate.

PubMed

Bizjan, Benjamin; Širok, Brane; Chen, Jinpeng

2018-05-20

This paper presents an optical method and system for contactless measurement of the mass flow rate of melts by digital cameras. The proposed method is based on reconstruction of melt stream geometry and flow velocity calculation by cross correlation, and is very cost-effective due its modest hardware requirements. Using a laboratory test rig with a small inductive melting pot and reference mass flow rate measurement by weighing, the proposed method was demonstrated to have an excellent dynamic response (0.1 s order of magnitude) while producing deviations from the reference of about 5% in the steady-state flow regime. Similar results were obtained in an industrial stone wool production line for two repeated measurements. Our method was tested in a wide range of melt flow rates (0.05-1.2 kg/s) and did not require very fast cameras (120 frames per second would be sufficient for most industrial applications).

VIM-positive Pseudomonas aeruginosa in a large tertiary care hospital: matched case-control studies and a network analysis.

PubMed

Voor In 't Holt, Anne F; Severin, Juliëtte A; Hagenaars, Margot B H; de Goeij, Inge; Gommers, Diederik; Vos, Margreet C

2018-01-01

Emergence of multidrug-resistant Pseudomonas aeruginosa is of global concern. We aimed to identify epidemiological relationships, the most common way of transmission, and risk factors for presence of Verona Integron-encoded Metallo-β-lactamase (VIM)-positive P. aeruginosa (VIM-PA). We conducted a network analysis and matched case-control studies (1:2:2). Controls were hospital-based and matched with cases for ward, day of admission (control group 1 and 2) and time between admission and the identification of VIM-PA (control group 1). The network was visualized using Cytoscape, and risk factors were determined using conditional logistic regression. Between August 2003 and April 2015, 144 case patients and 576 control patients were recruited. We identified 307 relationships in 114 out of these 144 patients, with most relationships (84.7%) identified at the same department < 3 months after a previous case patient was discharged. In the multivariable model, having undergone ≥1 gastroscopy (odds ratio [OR] = 4.40, 95% confidence interval [CI] = 2.00 to 9.65 and OR = 2.47; 95% CI = 1.12 to 5.49), > 10 day use of selective digestive tract decontamination (SDD) (OR = 2.97; 95% CI = 1.02 to 8.68 and OR = 4.61; 95% CI = 1.22 to 17.37), and use of quinolones (OR = 3.29; 95% CI = 1.34 to 8.10 and OR = 3.95; 95% CI = 1.13 to 13.83 and OR = 4.47; 95% CI = 1.75 to 11.43) were identified as risk factors when using both control groups. The network analysis indicated that the majority of transmissions occurred on the wards, but through unidentified and presumably persistent sources, which are most likely in the innate hospital environment. Previous use of certain antibiotic regimens made patients prone to VIM-PA carriage. Additionally, gastroscopy could be considered as a high-risk procedure in patients with risk factors. Our results add to the growing body of evidence that infection control measures targeting VIM-PA should be focused on reducing antibiotics and eliminating sources in the environment.

Use of Permanent Magnets in Electromagnetic Facilities for the Treatment of Aluminum Alloys

NASA Astrophysics Data System (ADS)

Beinerts, Toms; Bojarevičs, Andris; Bucenieks, Imants; Gelfgat, Yuri; Kaldre, Imants

2016-06-01

The possibility of applying the electromagnetic induction pump with permanent magnets for the transportation and stirring of aluminum melts in metallurgical furnaces is investigated. The electromagnetic and hydraulic characteristics of the pump have been investigated theoretically and experimentally with regard to its position in the furnace. The results of the experiments performed with a model in a eutectic InGaSn melt are in good agreement with the calculation data. Extrapolation of the experimental results on the physical characteristics of aluminum melts allows recommending such pumps for contactless control of motion and heat/mass transfer in aluminum melts in different technological processes. A high temperature and the aggressive properties of aluminum alloys make it complicated to use different mechanical devices to solve technological problems, such as liquid metal transportation, dosing, stirring, etc. In this case, any device units or elements moving in or contacting with the melt suffer from corrosion polluting the melt. Therefore, of more importance and topicality are contactless electromagnetic methods for processing of molten metals.

Experimental program on nucleation and structure in undercooled melts

NASA Technical Reports Server (NTRS)

1982-01-01

Undercooling and structural refinements in droplets of molten metal levitated in an induction field and/or by dispersion in a fluid carrier were studied. Nickel base and lower melting point alloys levitated in molten carrier fluids are considered. The dispersion of molten alloy droplets in a high temperature fluid following the procedures developed by Perepezko and co-workers for lower melting point alloys; obtaining a similar dispersion by room temperature mechanical mixing of particles of the metal and solidified liquid carrier; and solidification of single relatively large droplets in a transparent fluid carrier, enabling high-speed temperature measurement of the recalescence and subsequent cooling behavior are described.

Dissemination of a Multidrug-Resistant VIM-1- and CMY-99-Producing Proteus mirabilis Clone in Bulgaria.

PubMed

Markovska, Rumyana; Schneider, Ines; Keuleyan, Emma; Ivanova, Dobrinka; Lesseva, Magdalena; Stoeva, Temenuga; Sredkova, Mariya; Bauernfeind, Adolf; Mitov, Ivan

2017-04-01

The aim of this study was to analyze the beta-lactamases and the molecular epidemiology of 19 clinically significant isolates of Proteus mirabilis with decreased susceptibility to imipenem, which have been collected from seven hospitals, located in different Bulgarian towns (Sofia, Varna, and Pleven). The isolates were obtained from blood, urine, tracheal and wound specimens. One additional isolate from hospital environment was included. Susceptibility testing, conjugation experiments, and plasmid replicon typing were carried out. Beta-lactamases were characterized by isoelectric focusing, PCR, and sequencing. Clonal relatedness was investigated by RAPD and PFGE. Integron mapping was performed by PCR and sequencing. All isolates showed a multidrug-resistance profile, but remained susceptible to piperacillin/tazobactam, cefepime, meropenem, and fosfomycin. They produced identical beta-lactamases, namely: TEM-1, VIM-1, and CMY-99. PCR mapping revealed that the bla VIM-1 gene was part of a class 1 integron that additionally included the aac(6')-I, dhfrA1, and ant(3″)-Ia genes. In addition, 17 of the isolates carried the armA gene. Conjugation experiments and plasmid replicon typing were unsuccessful. The isolates were clonally related according to RAPD and PFGE typing. This study reveals the nationwide distribution of a multidrug-resistant P. mirabilis clone producing VIM-1 and CMY-99 along with the presence of different aminoglycoside resistance mechanisms.

Preparation of Aluminum-Zirconium Master Alloy by Aluminothermic Reduction in Cryolite Melt

NASA Astrophysics Data System (ADS)

Liu, Fengguo; Ding, Chenliang; Tao, Wenju; Hu, Xianwei; Gao, Bingliang; Shi, Zhongning; Wang, Zhaowen

2017-12-01

Al-Zr master alloy was prepared by aluminothermic reduction in cryolite melt without alumina impurity. The Al-Zr master alloy was characterized by x-ray diffraction, scanning electron microscopy, and energy-dispersive spectroscopy. The composition of the master alloy was analyzed by inductively coupled plasma optical emission spectrometry. The results indicated that Al-Zr master alloy with high purity could be obtained when byproduct Al2O3 was dissolved in the cryolite melt. The Al-Zr alloy was embedded in the Al matrix in the form of Al3Zr phase with long rod or tetragonal morphology due to temperature variation. Finally, we obtained Al-Zr alloy with 7 wt.% Zr by aluminothermic reduction for 90 min in cryolite melt at 980°C.

Experimental Determination of Spinel/Melt, Olivine/Melt, and Pyroxene/Melt Partition Coefficients for Re, Ru, Pd, Au, and Pt

NASA Technical Reports Server (NTRS)

Righter, K.; Campbell, A. J.; Humayun, M.

2003-01-01

Experimental studies have identified spinels as important hosts phases for many of the highly siderophile elements (HSE). Yet experimental studies involving chromite or Cr-rich spinel have been lacking. Experimental studies of partitioning of HSEs between silicate, oxides and silicate melt are plagued by low solubilities and the presence of small metallic nuggets at oxygen fugacities relevant to magmas, which interfere with analysis of the phases of interest. We have circumvented these problems in two ways: 1) performing experiments at oxidized conditions, which are still relevant to natural systems but in which nuggets are not observed, and 2) analysis of run products with laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS), allowing a combination of high sensitivity and good spatial resolution.

Numerical Simulation of Induction Channel Furnace to Investigate Efficiency for low Frequencies

NASA Astrophysics Data System (ADS)

Hang, N. Tran Thi; Lüdtke, U.

2018-05-01

The foundry industry worldwide commonly uses induction channel furnaces to heat and melt alloys. The operating frequency is one of the main issues when constructing an efficient channel furnace. It is possible to choose operating frequencies lower than 50 Hz using a modern IGBT power converter. This work shows the simulation results using ANSYS with the goal of finding the best electrical frequency necessary to operate the induction furnace. First, a two-dimensional model is used to calculate the efficiency depending on frequency. Then, the channel model is extended to a more realistic three-dimensional model. Finally, the influence of frequency, inductor profile, and several components of the induction channel furnace are discussed.

Retrospective Analysis of Bacterial Cultures Sampled in German Chicken-Fattening Farms During the Years 2011-2012 Revealed Additional VIM-1 Carbapenemase-Producing Escherichia coli and a Serologically Rough Salmonella enterica Serovar Infantis.

PubMed

Roschanski, Nicole; Fischer, Jennie; Falgenhauer, Linda; Pietsch, Michael; Guenther, Sebastian; Kreienbrock, Lothar; Chakraborty, Trinad; Pfeifer, Yvonne; Guerra, Beatriz; Roesler, Uwe H

2018-01-01

Carbapenems are last-resort antibiotics used in human medicine. The increased detection of carbapenem-resistant Enterobacteriaceae (CRE) is therefore worrying. In 2011 we reported the first livestock-associated VIM-1-producing Salmonella ( S .) enterica serovar Infantis (R3) isolate from dust, sampled in a German chicken fattening farm. Due to this observation we retrospectively investigated more than 536 stored bacterial cultures, isolated from 45 chicken fattening farms during the years 2011 and 2012. After a non-selective overnight incubation, the bacteria were transferred to selective media. Escherichia (E.) coli and Salmonella growing on these media were further investigated, including antibiotic susceptibility testing, carbapenemase gene screening and whole genome sequencing (WGS). In total, four CRE were found in three out of 45 investigated farms: Besides R3, one additional Salmonella (G-336-1a) as well as two E. coli isolates (G-336-2, G-268-2). All but G-268-2 harbored the bla VIM-1 gene. Salmonella isolates R3 and G-336-1 were closely related although derived from two different farms. All three bla VIM-1 -encoding isolates possessed identical plasmids and the bla VIM-1- containing transposon showed mobility at least in vitro . In isolate G-268-2, the AmpC beta-lactamase gene bla CMY-2 but no known carbapenemase gene was identified. However, a transfer of the phenotypic resistance was possible. Furthermore, G-268-2 contained the mcr-1 gene, combining phenotypical carbapenem- as well as colistin resistance in one isolate. Carbapenem-resistant Enterobacteriaceae have been found in three out of 45 investigated chicken flocks. This finding is alarming and emphasizes the importance of intervention strategies to contain the environmental spread of resistant bacteria in animals and humans.

Retrospective Analysis of Bacterial Cultures Sampled in German Chicken-Fattening Farms During the Years 2011–2012 Revealed Additional VIM-1 Carbapenemase-Producing Escherichia coli and a Serologically Rough Salmonella enterica Serovar Infantis

PubMed Central

Roschanski, Nicole; Fischer, Jennie; Falgenhauer, Linda; Pietsch, Michael; Guenther, Sebastian; Kreienbrock, Lothar; Chakraborty, Trinad; Pfeifer, Yvonne; Guerra, Beatriz; Roesler, Uwe H.

2018-01-01

Carbapenems are last-resort antibiotics used in human medicine. The increased detection of carbapenem-resistant Enterobacteriaceae (CRE) is therefore worrying. In 2011 we reported the first livestock-associated VIM-1-producing Salmonella (S.) enterica serovar Infantis (R3) isolate from dust, sampled in a German chicken fattening farm. Due to this observation we retrospectively investigated more than 536 stored bacterial cultures, isolated from 45 chicken fattening farms during the years 2011 and 2012. After a non-selective overnight incubation, the bacteria were transferred to selective media. Escherichia (E.) coli and Salmonella growing on these media were further investigated, including antibiotic susceptibility testing, carbapenemase gene screening and whole genome sequencing (WGS). In total, four CRE were found in three out of 45 investigated farms: Besides R3, one additional Salmonella (G-336-1a) as well as two E. coli isolates (G-336-2, G-268-2). All but G-268-2 harbored the blaVIM-1 gene. Salmonella isolates R3 and G-336-1 were closely related although derived from two different farms. All three blaVIM-1-encoding isolates possessed identical plasmids and the blaVIM-1- containing transposon showed mobility at least in vitro. In isolate G-268-2, the AmpC beta-lactamase gene blaCMY-2 but no known carbapenemase gene was identified. However, a transfer of the phenotypic resistance was possible. Furthermore, G-268-2 contained the mcr-1 gene, combining phenotypical carbapenem- as well as colistin resistance in one isolate. Carbapenem-resistant Enterobacteriaceae have been found in three out of 45 investigated chicken flocks. This finding is alarming and emphasizes the importance of intervention strategies to contain the environmental spread of resistant bacteria in animals and humans. PMID:29636734

EEG based time and frequency dynamics analysis of visually induced motion sickness (VIMS).

PubMed

Arsalan Naqvi, Syed Ali; Badruddin, Nasreen; Jatoi, Munsif Ali; Malik, Aamir Saeed; Hazabbah, Wan; Abdullah, Baharudin

2015-12-01

3D movies are attracting the viewers as they can see the objects flying out of the screen. However, many viewers have reported various problems which are usually faced after watching 3D movies. These problems include visual fatigue, eye strain, headaches, dizziness, blurred vision or collectively may be termed as visually induced motion sickness (VIMS). This research focuses on the comparison between 3D passive technology with a conventional 2D technology to find that whether 3D is causing trouble in the viewers or not. For this purpose, an experiment was designed in which participants were randomly assigned to watch 2D or a 3D movie. The movie was specially designed to induce VIMS. The movie was shown for the duration of 10 min to every participant. The electroencephalogram (EEG) data was recorded throughout the session. At the end of the session, participants rated their feelings using simulator sickness questionnaire (SSQ). The SSQ data was analyzed and the ratings of 2D and 3D participants were compared statistically by using a two tailed t test. From the SSQ results, it was found that participants watching 3D movies reported significantly higher symptoms of VIMS (p value <0.05). EEG data was analyzed by using MATLAB and topographic plots are created from the data. A significant difference has been observed in the frontal-theta power which increases with the passage of time in 2D condition while decreases with time in 3D condition. Also, a decrease in beta power has been found in the temporal lobe of 3D group. Therefore, it is concluded that there are negative effects of 3D movies causing significant changes in the brain activity in terms of band powers. This condition leads to produce symptoms of VIMS in the viewers.

Day-by-Day Variability of Home Blood Pressure and Incident Cardiovascular Disease in Clinical Practice: The J-HOP Study (Japan Morning Surge-Home Blood Pressure).

PubMed

Hoshide, Satoshi; Yano, Yuichiro; Mizuno, Hiroyuki; Kanegae, Hiroshi; Kario, Kazuomi

2018-01-01

We assessed the relationship between day-by-day home blood pressure (BP) variability and incident cardiovascular disease (CVD) in clinical practice. J-HOP study (Japan Morning Surge-Home Blood Pressure) participants underwent home BP monitoring in the morning and evening for a 14-day period, and their BP levels and BP variability independent of the mean (VIM) were assessed. Incident CVD events included coronary heart disease and stroke. Cox models were fitted to assess the home BP variability-CVD risk association. Among 4231 participants (mean±SD age, 64.9±10.9 years; 53.3% women; 79.1% taking antihypertensive medication), mean (SD) home systolic BP (SBP) levels over time and VIM SBP were 134.2 (14.3) and 6.8 (2.5) mm Hg, respectively. During a 4-year follow-up period (16 750.3 person-years), 148 CVD events occurred. VIM SBP was associated with CVD risk (hazard ratio per 1-SD increase, 1.32; 95% confidence interval [CI], 1.15-1.52), independently of mean home SBP levels over time and circulating B-type natriuretic peptide levels or urine albumin-to-creatinine ratio. Adding VIM SBP to the CVD prediction model improved the discrimination (C statistic, 0.785 versus 0.770; C statistic difference, 0.015; 95% CI, 0.003-0.028). Changes in continuous net reclassification improvement (0.259; 95% CI, 0.052-0.537), absolute integrated discrimination improvement (0.010; 95% CI, 0.003-0.016), and relative integrated discrimination improvement (0.104; 95% CI, 0.037-0.166) were also observed with the addition of VIM SBP to the CVD prediction models. In addition to the assessments of mean home SBP levels and cardiovascular end-organ damage, home BP variability measurements may provide a clinically useful distinction between high- and low-risk groups among Japanese outpatients. © 2017 American Heart Association, Inc.

Regional mapping of aerosol population and surface albedo of Titan by the massive inversion of the Cassini/VIMS dataset

NASA Astrophysics Data System (ADS)

Rodriguez, S.; Cornet, T.; Maltagliati, L.; Appéré, T.; Le Mouelic, S.; Sotin, C.; Barnes, J. W.; Brown, R. H.

2017-12-01

Mapping Titan's surface albedo is a necessary step to give reliable constraints on its composition. However, even after the end of the Cassini mission, surface albedo maps of Titan, especially over large regions, are still very rare, the surface windows being strongly affected by atmospheric contributions (absorption, scattering). A full radiative transfer model is an essential tool to remove these effects, but too time-consuming to treat systematically the 50000 hyperspectral images VIMS acquired since the beginning of the mission. We developed a massive inversion of VIMS data based on lookup tables computed from a state-of-the-art radiative transfer model in pseudo-spherical geometry, updated with new aerosol properties coming from our analysis of observations acquired recently by VIMS (solar occultations and emission phase curves). Once the physical properties of gases, aerosols and surface are fixed, the lookup tables are built for the remaining free parameters: the incidence, emergence and azimuth angles, given by navigation; and two products (the aerosol opacity and the surface albedo at all wavelengths). The lookup table grid was carefully selected after thorough testing. The data inversion on these pre-computed spectra (opportunely interpolated) is more than 1000 times faster than recalling the full radiative transfer at each minimization step. We present here the results from selected flybys. We invert mosaics composed by couples of flybys observing the same area at two different times. The composite albedo maps do not show significant discontinuities in any of the surface windows, suggesting a robust correction of the effects of the geometry (and thus the aerosols) on the observations. Maps of aerosol and albedo uncertainties are also provided, along with absolute errors. We are thus able to provide reliable surface albedo maps at pixel scale for entire regions of Titan and for the whole VIMS spectral range.

Titan's surface and atmosphere from Cassini/VIMS data with updated methane opacity

NASA Astrophysics Data System (ADS)

Hirtzig, M.; Bézard, B.; Coustenis, A.; Lellouch, E.; Drossart, P.; deBergh, C.; Campargue, A.; Boudon, V.; Tyuterev, V.; Rannou, P.; Cours, T.; Kassi, S.; Nikitin, A.; Wang, L.; Solomonidou, A.; Schmitt, B.; Rodriguez, S.

2012-04-01

In this paper we present an updated analysis of VIMS data in view of recent developments on the methane opacity in the 1.3-5.2 µm region, a very important parameter in simulating Titan's spectrum. We use a multi-stream radiative transfer model, benefitting from the latest methane absorption coefficients available [1], which allows us to determine more accurately the haze and surface contributions. This code is applied to Cassini/VIMS spectro-imaging data of various regions with very different spectral responses to extract information on the content of the lower atmosphere (0-200 km) as well as on the surface properties. In particular, we update the DISR aerosol model [2] for the Huygens landing site that we then adjust to fit the data for other locations on Titan's disk. Fitting VIMS data taken from 2004 to 2010 (TA to T70), around Titan's mid-latitudes (40°S-40°N), we determine the latitudinal and temporal evolution of the aerosol population, monitoring the North-South Asymmetry. While around the equinox [3] witnessed the collapse of the detached haze layer, we measure a continuous depletion of the aerosols throughout the atmosphere, although the NSA remains with a brighter northern hemisphere. Using this improved atmospheric model, we also retrieve surface albedos simultaneously for all the seven windows in the whole VIMS range for these regions, also recovering the shape of the surface albedo within each window. Eventually, we look for Titan's surface probable chemical composition, using mixtures of dark and complex hydrocarbons like bitumens and tholins, as well as bright CH4, CO2, NH3 and H2O ices of various grain sizes. [4] [1] Campargue, A. et al., (2012) Icarus, submitted. [2] Tomasko, M. et al., (2008) Planetary and Space Science, 56, 669. [3] West, R.A. et al., (2011) Geophysical Research Letters, 38, L06204. [4] Hirtzig, M. et al., (2012) Planetary and Space Science, submitted.

Inhibition of NF-kappa B pathway leads to deregulation of epithelial-mesenchymal transition and neural invasion in pancreatic cancer.

PubMed

Nomura, Alice; Majumder, Kaustav; Giri, Bhuwan; Dauer, Patricia; Dudeja, Vikas; Roy, Sabita; Banerjee, Sulagna; Saluja, Ashok K

2016-12-01

NF-κB has an essential role in the initiation and progression of pancreatic cancer and specifically mediates the induction of epithelial-mesenchymal transition and invasiveness. In this study, we demonstrate the importance of activated NF-κB signaling in EMT induction, lymphovascular metastasis, and neural invasion. Modulation of NF-κB activity was accomplished through the specific NF-κB inhibitor (BAY 11-7085), triptolide, and Minnelide treatment, as well as overexpression of IKBα repressor and IKK activator plasmids. In the classical lymphovascular metastatic cascade, inhibition of NF-κB decreased the expression of several EMT transcription factors (SNAI1, SNAI2, and ZEB1) and mesenchymal markers (VIM and CDH2) and decreased in vitro invasion, which was rescued by IKK activation. This was further demonstrated in vivo via BAY 11-7085 treatment in a orthotopic model of pancreatic cancer. In vivo NF-κB inhibition decreased tumor volume; decreased tumor EMT gene expression, while restoring cell-cell junctions; and decreasing overall metastasis. Furthermore, we demonstrate the importance of active NF-κB signaling in neural invasion. Triptolide treatment inhibits Nerve Growth Factor (NGF) mediated, neural-tumor co-culture in vitro invasion, and dorsal root ganglia (DRG) neural outgrowth through a disruption in tumor-neural cross talk. In vivo, Minnelide treatment decreased neurotrophin expression, nerve density, and sciatic nerve invasion. Taken together, this study demonstrates the importance of NF-κB signaling in the progression of pancreatic cancer through the modulation of EMT induction, lymphovascular invasion, and neural invasion.

Cassini/VIMS observations of the moon

USGS Publications Warehouse

Belluci, G.; Brown, R.H.; Formisano, V.; Baines, K.H.; Bibring, J.-P.; Buratti, B.J.; Capaccioni, F.; Cerroni, P.; Clark, R.N.; Coradini, A.; Cruikshank, D.P.; Drossart, P.; Jaumann, R.; Langevin, Y.; Matson, D.L.; McCord, T.B.; Mennella, V.; Miller, E.; Nelson, R.M.; Nicholson, P.D.; Sicardy, B.; Sotin, Christophe

2002-01-01

In this paper, we present preliminary scientific results obtained from the analysis of VIMS (Visible and Infrared Mapping Spectrometer) lunar images and spectra. These data were obtained during the Cassini Earth flyby in August 1999. Spectral ratios have been produced in order to derive lunar mineralogical maps. Some spectra observed at the north-east lunar limb, show few unusual absorption features located at 0.357, 0.430 and 0.452 ??m, the origin of which is presently unknown. ?? 2002 COSPAR. Published by Elsevier Science Ltd. All rights reserved.

Job Samples as Tank Gunnery Performance Predictors

DTIC Science & Technology

1980-09-01

previously been obtained ( Maitland , Eaton, and Neff, 1980). Table VI-M. The Table VI-M order of firing and engagement techniques used in Phase III were the... Maitland , Eaton, and Neff (1980) *** <.001 22 Sen 21 ’ )a. datz obtained from ch4 sensing cask was quanti:ied. as in Phase It, by Coti.purtirg the vie.i...of four test weighting methods in multiple regression. Educational and Psychological Measure- ment, 1959, 19, 103-114. Maitland , A. J., Eaton, N. K

Non-graphite crucible for high temperature applications

DOEpatents

Holcombe, Cressie E.; Pfeiler, William A.

1996-01-01

A multi-piece crucible for high temperature applications comprises a tubular side wall member having a lip on the inside surface and a bottom member or members forming a container for containing a melt of a material during a high temperature melt-casting operations. The multi-piece design prevents cracking of the crucible or leakage of the melt from the crucible during the melt-casting operation. The lip of the tubular member supports the bottom member. The contacting surfaces where the lip of the tubular side wall member contacts the bottom member of the multi-piece crucible contains a ceramic sealing material. The ceramic sealing material forms a seal sufficient to prevent the melt of the material from leaking out of the multi-piece crucible during the melt-casting process. The multi-piece crucible is made of a material which is chemically inert to the melt and has structural integrity at the melting point temperature of the melt, or of a material coated with such a material. The multi-piece crucible is contained in a thermal can assembly of a high temperature induction furnace during a high temperature melt-casting operation. One embodiment of the multi-piece crucible comprises a tubular member having a vertical slot filled with a ceramic sealing material to provide expansion of the tubular member without cracking during the high temperature melt-casting operation.

Non-graphite crucible for high temperature applications

DOEpatents

Holcombe, C.E.; Pfeiler, W.A.

1996-01-09

A multi-piece crucible for high temperature applications comprises a tubular side wall member having a lip on the inside surface and a bottom member or members forming a container for containing a melt of a material during a high temperature melt-casting operations. The multi-piece design prevents cracking of the crucible or leakage of the melt from the crucible during the melt-casting operation. The lip of the tubular member supports the bottom member. The contacting surfaces where the lip of the tubular side wall member contacts the bottom member of the multi-piece crucible contains a ceramic sealing material. The ceramic sealing material forms a seal sufficient to prevent the melt of the material from leaking out of the multi-piece crucible during the melt-casting process. The multi-piece crucible is made of a material which is chemically inert to the melt and has structural integrity at the melting point temperature of the melt, or of a material coated with such a material. The multi-piece crucible is contained in a thermal can assembly of a high temperature induction furnace during a high temperature melt-casting operation. One embodiment of the multi-piece crucible comprises a tubular member having a vertical slot filled with a ceramic sealing material to provide expansion of the tubular member without cracking during the high temperature melt-casting operation. 9 figs.

Titan's Surface Composition from Cassini VIMS Solar Occultation Observations

NASA Astrophysics Data System (ADS)

McCord, Thomas; Hayne, Paul; Sotin, Christophe

2013-04-01

Titan's surface is obscured by a thick absorbing and scattering atmosphere, allowing direct observation of the surface within only a few spectral win-dows in the near-infrared, complicating efforts to identify and map geologi-cally important materials using remote sensing IR spectroscopy. We there-fore investigate the atmosphere's infrared transmission with direct measure-ments using Titan's occultation of the Sun as well as Titan's reflectance measured at differing illumination and observation angles observed by Cas-sini's Visual and Infrared Mapping Spectrometer (VIMS). We use two im-portant spectral windows: the 2.7-2.8-mm "double window" and the broad 5-mm window. By estimating atmospheric attenuation within these windows, we seek an empirical correction factor that can be applied to VIMS meas-urements to estimate the true surface reflectance and map inferred composi-tional variations. Applying the empirical corrections, we correct the VIMS data for the viewing geometry-dependent atmospheric effects to derive the 5-µm reflectance and 2.8/2.7-µm reflectance ratio. We then compare the cor-rected reflectances to compounds proposed to exist on Titan's surface. We propose a simple correction to VIMS Titan data to account for atmospheric attenuation and diffuse scattering in the 5-mm and 2.7-2.8 mm windows, generally applicable for airmass < 3.0. We propose a simple correction to VIMS Titan data to account for atmospheric attenuation and diffuse scatter-ing in the 5-mm and 2.7-2.8 mm windows, generally applicable for airmass < 3.0. The narrow 2.75-mm absorption feature, dividing the window into two sub-windows, present in all on-planet measurements is not present in the occultation data, and its strength is reduced at the cloud tops, suggesting the responsible molecule is concentrated in the lower troposphere or on the sur-face. Our empirical correction to Titan's surface reflectance yields properties shifted closer to water ice for the majority of the low-to-mid latitude area covered by VIMS measurements. Four compositional units are defined and mapped on Titan's surface based on the positions of data clusters in 5-mm vs. 2.8/2.7-mm scatter plots; a simple ternary mixture of H2O, hydrocarbons and CO2 might explain the reflectance properties of these surface units. The vast equatorial "dune seas" are compositionally very homogeneous, perhaps suggesting transport and mixing of particles over very large distances and/or and very consistent formation process and source material. The composi-tional branch characterizing Tui Regio and Hotei Regio is consistent with a mixture of typical Titan hydrocarbons and CO2, or possibly methane/ethane; the concentration mechanism proposed is something similar to a terrestrial playa lake evaporate deposit, based on the fact that river channels are known to feed into at least Hotei Regio.

Effects of thalamic deep brain stimulation on spontaneous language production.

PubMed

Ehlen, Felicitas; Vonberg, Isabelle; Kühn, Andrea A; Klostermann, Fabian

2016-08-01

The thalamus is thought to contribute to language-related processing, but specifications of this notion remain vague. An assessment of potential effects of thalamic deep brain stimulation (DBS) on spontaneous language may help to delineate respective functions. For this purpose, we analyzed spontaneous language samples from thirteen (six female / seven male) patients with essential tremor treated with DBS of the thalamic ventral intermediate nucleus (VIM) in their respective ON vs. OFF conditions. Samples were obtained from semi-structured interviews and examined on multidimensional linguistic levels. In the VIM-DBS ON condition, participants used a significantly higher proportion of paratactic as opposed to hypotactic sentence structures. This increase correlated negatively with the change in the more global cognitive score, which in itself did not change significantly. In conclusion, VIM-DBS appears to induce the use of a simplified syntactic structure. The findings are discussed in relation to concepts of thalamic roles in language-related cognitive behavior. Copyright © 2016 Elsevier Ltd. All rights reserved.

Endurance and failure characteristics of main-shaft jet engine bearings at 3x10 to the 6th power DN

NASA Technical Reports Server (NTRS)

Bamberger, E. N.; Zaretsky, E. V.; Signer, H.

1976-01-01

Groups of thirty 120-mm bore angular contact ball bearings were endurance tested at a speed of 12,000 and 25,000 rpm and a thrust load of 66 721 N. The bearings were manufactured from a single heat of VIM-VAR AISI M-50 steel. At 1.44X1 million and 3.0x1 million DN, 84 483 and 74 800 bearing test hours were accumulated, respectively. Test results were compared with similar bearings made from CVM AISI M-50 steel run under the same conditions. Bearing lives at speeds of 3x1 million DN with the VIM-VAR AISI M-50 steel were nearly equivalent to those obtained at lower speeds. A combined processing and material life factor of 44 was found for VIM-VAR AISI M-50 steel. Continuous running after a spall has occurred at 3.0x1 million DN can result in a destructive fracture of the bearing inner race.

Purfication kinetics of beryllium during vacuum induction melting

NASA Technical Reports Server (NTRS)

Mukherjee, J. L.; Gupta, K. P.; Li, C. H.

1972-01-01

The kinetics of evaporation in binary alloys were quantitatively treated. The formalism so developed works well for several systems studied. The kinetics of purification of beryllium was studied through evaporation data actually acquired during vacuum induction melting. Normal evaporation equations are shown to be generally valid and useful for understanding the kinetics of beryllium purification. The normal evaporation analysis has been extended to cover cases of limited liquid diffusion. It was shown that under steady-state evaporation, the solute concentration near the surface may be up to six orders of magnitude different from the bulk concentration. Corrections for limited liquid diffusion are definitely needed for the highly evaporative solute elements, such as Zn, Mg, and Na, for which the computed evaporation times are improved by five orders of magnitude. The commonly observed logarithmic relation between evaporation time and final concentration further supports the validity of the normal evaporation equations.

Electromagnetic containerless processing requirements and recommended facility concept and capabilities for space lab

NASA Technical Reports Server (NTRS)

Frost, R. T.; Bloom, H. L.; Napaluch, L. J.; Stockhoff, E. H.; Wouch, G.

1974-01-01

Containerless melting, reaction, and solidification experiments and processes which potentially can lead to new understanding of material science and production of new or improved materials in the weightless space environment are reviewed in terms of planning for spacelab. Most of the experiments and processes discussed are amenable to the employment of electromagnetic position control and electromagnetic induction or electron beam heating and melting. The spectrum of relevant properties of materials, which determine requirements for a space laboratory electromagnetic containerless processing facility are reviewed. Appropriate distributions and associated coil structures are analyzed and compared on the basis of efficiency, for providing the functions of position sensing, control, and induction heating. Several coil systems are found capable of providing these functions. Exchangeable modular coils in appropriate sizes are recommended to achieve the maximum power efficiencies, for a wide range of specimen sizes and resistivities, in order to conserve total facility power.

Solubility of Nitrogen in Superaustenitic Stainless Steels During Air Induction Melting

NASA Astrophysics Data System (ADS)

Chandrasekar, A.; Anburaj, J.; Narayanan, R.; Balusamy, V.; Mohamed Nazirudeen, S. S.

2013-04-01

The amount of nitrogen contained in super austenitic stainless steels (SASS) influences their properties significantly. The effect of maximum amount of nitrogen in the highly alloyed Cr and Ni SASS containing further additions of Mo and Mn is studied. The calculated nitrogen contents of the experimental alloys are compared with the actual nitrogen contents obtained in the alloys produced using induction melting furnace. The actual nitrogen content of the alloys is always lower than the calculated value, and this discrepancy is due to the presence of positive interaction parameters of Ni, Cu, and Si in the alloy. However, the yield of nitrogen in the liquid SASS is improved significantly with additions of Mn and Mo contents. The construction of multicomponent phase diagrams for SASS is demonstrated using Thermo-Calc software. SASS containing more nitrogen exhibited a very high strength without loss of toughness.

Analysis of Power Supply Heating Effect during High Temperature Experiments Based on the Electromagnetic Steel Teeming Technology

NASA Astrophysics Data System (ADS)

He, Ming; Wang, Qiang; Liu, Xin'an; Shi, Chunyang; Liu, Tie; He, Jicheng

2017-04-01

For further lowering inclusions and improving the quality of steel, a new electromagnetic steel-teeming technology based on electromagnetic induction heating was proposed. To assess the proposed technology, an experimental platform that imitates the actual production condition of steelmakers was established. High temperature experiments were performed to investigate the melting length of Fe-C alloy under different power and frequency conditions. The heating effect was analyzed, and the method of magnetic shielding to reduce the power loss of power supply was put forward. The results show that when the power is 40 kW and frequency is 25 kHz, the melting length of the Fe-C alloy is 89.2 mm in 120 s, which meets the requirements of steel teeming. In addition, when magnetic shielding material is installed under the induction coil, the power loss is reduced by about 64 %, effectively improving the heating effect of power supply.

Noncontact technique for measuring the electrical resistivity and magnetic susceptibility of electrostatically levitated melts

NASA Astrophysics Data System (ADS)

Rustan, G. E.; Spyrison, N. S.; Kreyssig, A.; Prozorov, R.; Goldman, A. I.

2012-02-01

Over the last two decades the popularity of levitation methods for studying equilibrium and supercooled melts has increased steadily. Measurements of density, viscosity, surface tension, and atomic structure have become well established. In contrast, measurements of electrical resistivity and magnetic susceptibility of levitated melts have been very limited. To fill this void, we have combined the tunnel diode oscillator (TDO) technique with electrostatic levitation (ESL) to perform inductively coupled measurements on levitated melts. A description of the basic operating principles of the TDO and ESL will be given, as well as a description of the implementation and performance characteristics of this technique. Preliminary measurements of electrical resistivity in the solid and liquid state will be presented for samples of Zr, Si, and Ge, as well as the measurements of ferromagnetic transitions in Fe and Co based alloys.

Preliminary Results from Duplex Procedure for Obtain of Fe Based Materials for Automotive Applications

NASA Astrophysics Data System (ADS)

Crăciun, R. C.; Stanciu, S.; Geantă, V.; Voiculescu, I.; Manole, V.; Gârneţ, I. A.; Alexandru, A.; Cimpoesu, N.; Săndulache, F.

2017-06-01

Abstract Iron based materials still represent a high percentage from metallic materials used in industry, in general, and in automotive industry, in particular. In this case we used a duplex process in order to obtain the FeMnSiAl experimental alloy for a more efficient use of various units. In the first stage iron, manganese, silicon and aluminum were melted and mixed together using arc melting technology and for the second stage the alloy was re-melt for homogeneity in an induction furnace. Chemical composition, after each melting step, was analyzed using EDS Bruker detector for various areas and microstructural characterization using SEM, VegaTescan LMH II with SE detector, equipment. This alloy is proposed as a metallic approach of mechanical dumpers used in automotive industry for low and medium impact contacts.

Clonal Transmission of Gram-Negative Bacteria with Carbapenemases NDM-1, VIM-1, and OXA-23/72 in a Bulgarian Hospital.

PubMed

Pfeifer, Yvonne; Trifonova, Angelina; Pietsch, Michael; Brunner, Magdalena; Todorova, Iva; Gergova, Ivanka; Wilharm, Gottfried; Werner, Guido; Savov, Encho

2017-04-01

We characterized 72 isolates with reduced susceptibility to carbapenems (50 Acinetobacter spp., 13 Proteus mirabilis, five Escherichia coli, one Morganella morganii, one Enterobacter cloacae, one Providencia rettgeri, and one Pseudomonas aeruginosa) from a hospital in Sofia, Bulgaria. Different β-lactamase genes were identified by polymerase chain reaction and sequencing. Bacterial strain typing was performed by enzymatic macrorestriction and pulsed-field gel electrophoresis (PFGE) typing as well as multilocus sequence typing for selected isolates. The majority of Acinetobacter baumannii (46/50) and one Acinetobacter pittii isolate harbored carbapenemase genes bla OXA-23 or bla OXA-72 ; two A. baumannii contained both genes. PFGE typing of all A. baumannii showed the presence of nine different clones belonging to eight sequence types ST350, ST208, ST436, ST437, ST449, ST231, ST502, and ST579. Molecular characterization of the remaining isolates confirmed the presence of one NDM-1-producing E. coli-ST101 clone (five isolates) and one P. mirabilis clone (13 isolates) with VIM-1 and CMY-99. Furthermore, NDM-1 was identified in P. rettgeri and M. morganii and VIM-2 in the P. aeruginosa isolate. The permanent introduction of OXA-23/72 carbapenemase-producing A. baumannii clones into the hospital and the repeated occurrence of one VIM-1-producing P. mirabilis and one NDM-1-producing E. coli-ST101 clone over a period of more than 1 year is of concern and requires intensified investigations.

Epidemiology and virulence of VIM-4 metallo-beta-lactamase-producing Pseudomonas aeruginosa isolated from burn patients in eastern Algeria.

PubMed

Meradji, Samah; Barguigua, Abouddihaj; Bentakouk, Mohamed Cherif; Nayme, Kaotar; Zerouali, Khalid; Mazouz, Dekhil; Chettibi, Houria; Timinouni, Mohammed

2016-06-01

In this study, we investigated the prevalence of carbapenem-resistant Pseudomonas aeruginosa (CRPA) in burn patients from eastern Algeria, CRPA virulence factors and the molecular epidemiology of CRPA. The overall prevalence of CRPA was 48.38%. Seven (46.66%) isolates were metallo-β-lactamases (MBL) producers and contained the MBL genes blaVIM-4 (n=6) and blaVIM-2 (n=1). Risk factors for CRPA infection were urinary catheter use and intubation (p=0.008). A high percentage of virulence factors (86.6% of these isolates were able to produce protease; 73.3% of isolates has DNase; and 66.6% were haemolysin positive) was observed in CRPA isolates. Among the seven MBL-producing isolates, four had the same clonal profile. The class 1 integrons, which contained the aadA7 gene cassette, were detected in six isolates. The 16SrRNA methylase gene, rmtB, was detected in one strain. All CRPA isolates were biofilm formers. A study on the kinetics of biofilm production revealed that biofilm production increased when the concentration of imipenem or ciprofloxacin and the incubation time increased. This is the first study to report the presence of VIM-4-producing P. aeruginosa from North Africa and also of the high prevalence of CRPA isolates. Based on our study of burn unit patients, the high percentage of P. aeruginosa with virulence factors and multi-drug resistance is alarming. Copyright © 2016 Elsevier Ltd and ISBI. All rights reserved.

Mapping and interpretation of Sinlap crater on Titan using Cassini VIMS and RADAR data

USGS Publications Warehouse

Le, Mouelic S.; Paillou, P.; Janssen, M.A.; Barnes, J.W.; Rodriguez, S.; Sotin, Christophe; Brown, R.H.; Baines, K.H.; Buratti, B.J.; Clark, R.N.; Crapeau, M.; Encrenaz, P.J.; Jaumann, R.; Geudtner, D.; Paganelli, F.; Soderblom, L.; Tobie, G.; Wall, S.

2008-01-01

Only a few impact craters have been unambiguously detected on Titan by the Cassini-Huygens mission. Among these, Sinlap is the only one that has been observed both by the RADAR and VIMS instruments. This paper describes observations at centimeter and infrared wavelengths which provide complementary information about the composition, topography, and surface roughness. Several units appear in VIMS false color composites of band ratios in the Sinlap area, suggesting compositional heterogeneities. A bright pixel possibly related to a central peak does not show significant spectral variations, indicating either that the impact site was vertically homogeneous, or that this area has been recovered by homogeneous deposits. Both VIMS ratio images and dielectric constant measurements suggest the presence of an area enriched in water ice around the main ejecta blanket. Since the Ku-band SAR may see subsurface structures at the meter scale, the difference between infrared and SAR observations can be explained by the presence of a thin layer transparent to the radar. An analogy with terrestrial craters in Libya supports this interpretation. Finally, a tentative model describes the geological history of this area prior, during, and after the impact. It involves mainly the creation of ballistic ejecta and an expanding plume of vapor triggered by the impact, followed by the redeposition of icy spherules recondensed from this vapor plume blown downwind. Subsequent evolution is then driven by erosional processes and aeolian deposition. Copyright 2008 by the American Geophysical Union.

Translational induction of heat shock transcription factor σ32: evidence for a built-in RNA thermosensor

PubMed Central

Morita, Miyo Terao; Tanaka, Yoshiyuki; Kodama, Takashi S.; Kyogoku, Yoshimasa; Yanagi, Hideki; Yura, Takashi

1999-01-01

Induction of heat shock proteins in Escherichia coli is primarily caused by increased cellular levels of the heat shock σ-factor σ32 encoded by the rpoH gene. Increased σ32 levels result from both enhanced synthesis and stabilization. Previous work indicated that σ32 synthesis is induced at the translational level and is mediated by the mRNA secondary structure formed within the 5′-coding sequence of rpoH, including the translation initiation region. To understand the mechanism of heat induction of σ32 synthesis further, we analyzed expression of rpoH–lacZ gene fusions with altered stability of mRNA structure before and after heat shock. A clear correlation was found between the stability and expression or the extent of heat induction. Temperature-melting profiles of mRNAs with or without mutations correlated well with the expression patterns of fusion genes carrying the corresponding mutations in vivo. Furthermore, temperature dependence of mRNA–30S ribosome–tRNAfMet complex formation with wild-type or mutant mRNAs in vitro agreed well with that of the expression of gene fusions in vivo. Our results support a novel mechanism in which partial melting of mRNA secondary structure at high temperature enhances ribosome entry and translational initiation without involvement of other cellular components, that is, intrinsic mRNA stability controls synthesis of a transcriptional regulator. PMID:10090722

Poster 13: Large-scale simultaneous mapping of Titan's aerosol opacity and surface albedo by a new massive inversion method of Cassini/VIMS data

NASA Astrophysics Data System (ADS)

Maltagliati, Luca; Rodriguez, Sebastien; Sotin, Christophe; Rannou, Pascal; Bezard, Bruno; Solomonidou, Anezina; Coustenis, Athena; Appere, Thomas; Cornet, Thomas; Le Mouelic, Stephane

2016-06-01

We have still limited information on Titan's surface albedo in the near-infrared. Only few spectral windows exist in between the intense methane bands, and even those windows are strongly affected by atmospheric contributions (absorption, scattering). Yet, this part of the spectrum is important to determine the surface composition thanks to the wealth of absorption bands by minerals and ices present there. A radiative transfer model is an effective tool to take the atmospheric effects into consideration in the analysis (e.g. Rannou et al. 2010, Griffith et al 2012, Solomonidou et al. 2016,...), but it is too time-consuming to process the whole VIMS hyperspectral dataset (millions of spectra) and create large-scale maps of the surface albedo. To overcome this problem, we developed an inversion method of VIMS data that employs lookup tables of synthetic spectra produced by a state-of-the-art radiative transfer model (described in its original form in Hirtzig et al. 2013). The heavy computational part (calling the radiative transfer model) is thus done only once for all during the creation of the modeled spectra. We updated the model with new methane spectroscopy and the new aerosol parameters we found in our analysis of the VIMS Emission Phase Function (see the other Maltagliati et al. abstract in this workshop). We analyzed in detail the behavior of the spectra as a function of the free parameters of the model (three inputs, the incidence, emergence and azimuth angles; and two products: the aerosol opacity and the surface albedo) in order to create an optimized grid for the lookup table. The lookup tables were then grafted onto an ad-hoc inversion model. Our method can process a whole 64x64 VIMS datacube in few minutes, with a gain in computational time of a factor of more than one thousand with respect to the standard method. This will consent for the first time a truly massive inversion of VIMS data and large-scale acquisition of Titan's surface albedo, paving the way for global maps of mineralogical composition (and related temporal variations). Results of simultaneous maps of aerosol opacity and surface albedo for the various surface windows are shown for some selected flybys observing the same area with different geometries, to highlight the robustness of the method to correct seamlessly the atmospheric effects.

Differences in the Spectrum of Anti-Citrullinated Protein Antibody Fine Specificities Between Malaysian and Swedish Patients With Rheumatoid Arthritis: Implications for Disease Pathogenesis.

PubMed

Too, Chun Lai; Murad, Shahnaz; Hansson, Monika; Alm, Linda Mathsson; Dhaliwal, Jasbir Singh; Holmdahl, Rikard; Jakobsson, Per-Johan; Alfredsson, Lars; Klareskog, Lars; Rönnelid, Johan; Padyukov, Leonid

2017-01-01

Antibodies to the citrullinated protein antigens (ACPAs) are important in the diagnosis and pathogenesis of rheumatoid arthritis (RA). However, the prevalence of ACPAs with different fine specificities in different populations is unclear. This study sought to examine the fine specificity of the antibody responses toward citrullinated proteins in RA patients from Malaysia, an area where genetic and environmental determinants of RA are different from those in more frequently studied cohorts of Caucasian subjects. A multiplex analytic microarray system was used to analyze the occurrence of antibodies to 10 different citrullinated peptides (filaggrin [fil307-324], vimentin [Vim2-17, Vim60-75], fibrinogen [Fibα563-583, Fibα580-600, Fibβ36-52, Fibβ62-81a, Fibβ62-81b], enolase [Eno5-21], and type II collagen [CitCII355-378]) in serum samples from 4,089 RA patients (1,231 Malaysian and 2,858 Swedish) and 827 healthy control subjects (249 Malaysian and 578 Swedish). The positive reaction threshold for each peptide was set separately for each population based on a specificity of 98%. Distinct differences in the frequencies of 5 ACPA fine specificities (Vim60-75, Vim2-17, Fibβ62-81b, Eno5-21, and CitCII355-378) were found between the Malaysian and Swedish RA populations, despite a nearly identical percentage of patients in each population who were positive for anti-cyclic citrullinated peptide 2 antibodies. In Malaysian RA patients compared with Swedish RA patients, the frequencies of antibodies to Vim60-75 (54% versus 44%, corrected P [P corr ] = 1.06 × 10 -8 ) and CitCII355-378 (17% versus 13%, P corr  = 0.02) were significantly higher, while the frequencies of antibodies to Vim2-17 (25% versus 32%, P corr  = 1.91 × 10 -4 ), Fibβ62-81b (15% versus 30%, P corr  = 2.47 × 10 -22 ), and Eno5-21 (23% versus 50%, P corr  = 3.64 × 10 -57 ) were significantly lower. Serum ACPA fine specificities differ between RA patients in different populations, although the total proportions of individuals positive for ACPAs are similar. Differing patterns of ACPA fine specificity could be attributed to variations in genetic and/or environmental factors. © 2016 The Authors. Arthritis & Rheumatology published by Wiley Periodicals, Inc. on behalf of the American College of Rheumatology.

Evaluation of the physicochemical properties and compaction behavior of melt granules produced in microwave-induced and conventional melt granulation in a single pot high shear processor.

PubMed

Loh, Z H; Sia, B Y; Heng, Paul W S; Lee, C C; Liew, Celine V

2011-12-01

Recently, microwave-induced melt granulation was shown to be a promising alternative to conventional melt granulation with improved process monitoring capabilities. This study aimed to compare the physicochemical and compaction properties of granules produced from microwave-induced and conventional melt granulation. Powder admixtures comprising equivalent proportions by weight of lactose 200 M and anhydrous dicalcium phosphate were granulated with polyethylene glycol 3350 under the influence of microwave-induced and conventional heating in a 10-L single pot high shear processor. The properties of the granules and compacts produced from the two processes were compared. Relative to conventional melt granulation, the rates at which the irradiated powders heated up in microwave-induced melt granulation were lower. Agglomerate growth proceeded at a slower rate, and this necessitated longer massing durations for growth induction. These factors prompted greater evaporative moisture losses from the melt granules. Additionally, nonuniform heating of the powders under the influence of microwaves led to increased inter-batch variations in the binder contents of resultant melt granules and a reliance of content homogeneity on massing duration. Agglomerate growth proceeded more rapidly under the influence of conventional heating due to the enhanced heating capabilities of the powders. Melt granules produced using the conventional method possessed higher moisture contents and improved content homogeneity. The compaction behavior of melt granules were affected by their mean sizes, porosities, flow properties, binder, and moisture contents. The last two factors were responsible for the disparities in compaction behavior of melt granules produced from microwave-induced and conventional melt granulation.

Remote sensing applications in marine science programs at VIMS

NASA Technical Reports Server (NTRS)

Gordon, H. H.; Penney, M. E.; Byrne, R. J.

1974-01-01

Scientists at the Virginia Institute of Marine Science (VIMS) utilized remote sensing in three programs: (1) tonal variations in imagery of wetlands; (2) use of the thermal infrared to delineate the discharge cooling water at the Virginia Electric and Power Company (VEPCO) nuclear power station on the James River; and (3) the use of aerial photography to determine the volume storage function for water in the marsh-bay complex fed by Wachapreague Inlet on the Eastern Shore of Virginia. Details of the investigations are given, along with significant results.

DECONTAMINATION OF NEUTRON-IRRADIATED REACTOR FUEL

DOEpatents

Buyers, A.G.; Rosen, F.D.; Motta, E.E.

1959-12-22

A pyrometallurgical method of decontaminating neutronirradiated reactor fuel is presented. In accordance with the invention, neutron-irradiated reactor fuel may be decontaminated by countercurrently contacting the fuel with a bed of alkali and alkaine fluorides under an inert gas atmosphere and inductively melting the fuel and tracking the resulting descending molten fuel with induction heating as it passes through the bed. By this method, a large, continually fresh surface of salt is exposed to the descending molten fuel which enhances the efficiency of the scrubbing operation.

Studying Titan's surface photometry in the 5 microns atmospheric window with the Cassini/VIMS instrument

NASA Astrophysics Data System (ADS)

Cornet, T.; Altobelli, N.; Sotin, C.; Le Mouelic, S.; Rodriguez, S.; Philippe, S.; Brown, R. H.; Barnes, J. W.; Buratti, B. J.; Baines, K. H.; Clark, R. N.; Nicholson, P. D.

2014-12-01

Due to the influence of methane gas and a thick aerosols haze in the atmosphere, Titan's surface is only visible in 7 spectral atmospheric windows centered at 0.93, 1.08, 1.27, 1.59, 2.01, 2.7-2.8 and 5 microns with the Cassini Visual and Infrared Mapping Spectrometer (VIMS). The 5 microns atmospheric window constitutes the only one being almost insensitive to the haze scattering and which presents only a reduced atmospheric absorption contribution to the signal recorded by the instrument. Despite these advantages leading to the almost direct view of the surface, the 5 microns window is also the noisiest spectral window of the entire VIMS spectrum (an effect highly dependent on the time exposure used for the observations), and it is not totally free from atmospheric contributions, enough to keep "artefacts" in mosaics of several thousands of cubes due to atmospheric and surface photometric effects amplified by the very heterogeneous viewing conditions between each Titan flyby. At first order, a lambertian surface photometry at 5 microns has been used as an initial parameter in order to estimate atmospheric opacity and surface photometry in all VIMS atmospheric windows and to determine the albedo of the surface, yet unknown, both using radiative transfer codes on single cubes or empirical techniques on global hyperspectral mosaics. Other studies suggested that Titan's surface photometry would not be uniquely lambertian but would also contain anisotropic lunar-like contributions. In the present work, we aim at constraining accurately the surface photometry of Titan and residual atmospheric absorption effects in this 5 microns window using a comprehensive study of relevant sites located at various latitudes. Those include bright and dark (dunes) terrains, 5-microns bright terrains (Hotei Regio and Tui Regio), the Huygens Landing Site and high latitudes polar lakes and seas. The VIMS 2004 to 2014 database, composed of more than 40,000 hyperspectral cubes acquired on Titan, has been decomposed into a MySQL relational database in order to perform the present study looking at both spatial and temporal (seasonal) aspects.

Coexistence of metallo-beta-lactamase-encoding genes in Pseudomonas aeruginosa.

PubMed

Mohanam, Lavanya; Menon, Thangam

2017-07-01

The emergence and rapid spread of carbapenem resistance mediated by metallo-beta-lactamase (MBL) in Pseudomonas aeruginosa is of major concern due to limited therapeutic options. This study was aimed at detecting the presence of MBL and its association with integrons in imipenem-resistant P. aeruginosa isolates and to determine their genetic relatedness. A total of 213 P. aeruginosa isolates were collected from two tertiary care centres and tested against anti-pseudomonal antibiotics by antimicrobial susceptibility testing, followed by the detection of MBL production by combined disk method. Minimum inhibitory concentration (MIC) of meropenem was determined by E-test. Multiplex polymerase chain reaction (PCR) was performed for the detection of blaSPM, blaIMP, blaVIM, blaNDM, blaGIM and blaSIM. PCR was carried out to characterize the variable region of class 1 integron. Transcongujation assay was carried out for the confirmation of plasmid-mediated resistance. Enterobacterial repetitive intergenic consensus sequence (ERIC)-PCR was performed for determining the genetic relatedness among P. aeruginosa isolates. Of the 213 P. aeruginosa isolates, 22 (10%) were found to be carbapenem resistant and these were from pus 18 (82%), urine 2 (9%), sputum 1 (5%) and tracheal wash 1 (5%). Among 22 isolates, 18 (81.8%) were found to be MBL producers by phenotypic method and MIC range of meropenem was 8 to >32 μg/ml. PCR amplification showed that 20 (91%) isolates carried any one of the MBL genes tested: blaVIM and blaNDM in seven (32%) and six (27%) isolates, respectively; blaVIM and blaNDMin three (14%); blaIMP and blaNDM in two (9%); blaVIM and blaIMP in one (5%) isolate. The blaVIM, blaIMP and blaNDM were found to co-exist in one isolate. None of the isolates were positive for blaSPM, blaSIM and blaGIM. All 22 isolates carried class I integron. Of the 20 MBL-positive isolates, transconjugants were obtained for 15 isolates. ERIC-PCR analysis showed all isolates to be clonally independent. Our results showed 10.3 per cent of carbapenem resistance among P. aeruginosa isolates, and the coexistence of MBL-encoding genes among P. aeruginosa mediated by class I integron.

Dark Areas on Equatorial Regions of Titan: Implication in Particles Size of Water-Ice and Combination with Tholins.

NASA Astrophysics Data System (ADS)

Brossier, J. F.; Stephan, K.; Jaumann, R.; Le Mouelic, S.; Brown, R. H.

2015-12-01

Since the equatorial regions of Titan have been fully observed by the Visible and Infrared Mapping Spectrometer (VIMS) [1], the analysis of false-color composite allows distinguishing three mains units: bright, bluish and brownish units [2-4]. This distinction can be enhanced by using ratios of VIMS channels that allow emphasizing subtle difference of spectral behavior of the units, especially at short wavelengths (below 2 µm). The VIMS - bluish unit is mostly enriched in water-ice particles, which consist of particles exposition derived from the high standing water-ice substrate and deposited on the lowlands after fluvial/pluvial processes [5] and impact [6]. This spectral unit is mainly located at the frontier of the large bright plateaus, and hence considered as a transition zone to the VIMS - brownish unit corresponding to the Radar dune-fields [7]. Whereas these brownish dunes consist on atmospheric aerosols, named tholins [4] contaminated with particles of water ice. High resolution observations of VIMS (less than 1 km per pixel), show local transition zones between the bright material and the brownish dunes, suggesting weathering and erosional processes (e.g. Bohai Sinus and the Huygens Landing site). The reason of these spectral variations in this bluish unit might be due to physical properties variations related to erosional processes occurring on the bright plateaus [5,8], such as particles sizes and the degree of mixture with tholins. Our approach enables a better understanding of the distribution of the water-ice grains in terms of particles-size and mixtures with tholins at local and global scale. Reference: [1] Brown, R. H. et al. (2005) SSR. [2] Barnes, J. W. et al. (2007) Icarus, 186 (1). [3] Soderblom, L. A. et al. (2007) PSS, 55 (13). [4] Langhans, M. H. et al. (2011) PSS, 60. [5] Jaumann, R. et al. (2008) Icarus, 197. [6] Le Mouelic, S. et al. (2008) JGR, 113 (E04003). [7] Rodriguez, S. et al. (2013) Icarus. [8] Jaumann, R. et al. (2009) LPSC.

Seasonal Evolution of the North and South Polar Vortex on Titan From 2004 to 2017 as Seen by Cassini/VIMS

NASA Astrophysics Data System (ADS)

Le Mouelic, S.; Robidel, R.; Rousseau, B.; Rodriguez, S.; Cornet, T.; Sotin, C.; Barnes, J. W.; Brown, R. H.; Buratti, B. J.; Baines, K. H.; Clark, R. N.; Nicholson, P. D.

2017-12-01

Cassini entered in Saturn's orbit in July 2004. In thirteen years, 127 targeted flybys of Titan have been performed. We focus our study on the analysis of the complete Visual and Infrared Mapping Spectrometer data set, with a particular emphasis on the evolving features on both poles. We have computed individual global maps of the north and south poles for each of the 127 targeted flybys, using VIMS wavelengths sensitive both to clouds and surface features. First evidences for a vast ethane cloud covering the North Pole is seen as soon as the first and second targeted flyby in October 2004 and December 2005 [1]. The first detailed imaging of this north polar feature with VIMS was obtained in December 2006, thanks to a change in inclination of the spacecraft orbit [2]. At this time, the northern lakes and seas of Titan were totally masked to the optical instruments by the haze and clouds, whereas the southern pole was well illuminated and mostly clear of haze and vast clouds. The vast north polar feature progressively vanished around the equinox in 2009 [2,3,4], in agreement with the predictions of Global Circulation Models [5]. It revealed progressively the underlying lakes to the ISS and VIMS instruments, which show up very nicely in VIMS in a series of flybys between T90 and T100. First evidences of an atmospheric vortex growing over the south pole occurred in May 2012 (T82), with a high altitude feature being detected consistently at each flyby up to the last T126 targeted flyby, and also appearing in more distant observations up to the end of the Cassini mission. Cassini has covered almost half a titanian year, corresponding to two seasons. The situation observed at the South Pole in the last images may correspond to what was observed in the north as Cassini just arrived. [1] Griffith et al., Science, 2006. [2] Le Mouélic et al., PSS, 2012. [3] Rodriguez et al., Nature, 2009. [4] Rodriguez et al., Icarus 2011. [4] Hirtzig et al., Icarus, 2013. [5] Rannou et al., Science 2005

Vimentin, a Novel NF-κB Regulator, Is Required for Meningitic Escherichia coli K1-Induced Pathogen Invasion and PMN Transmigration across the Blood-Brain Barrier.

PubMed

Huang, Sheng-He; Chi, Feng; Peng, Liang; Bo, Tao; Zhang, Bao; Liu, Li-Qun; Wu, Xuedong; Mor-Vaknin, Nirit; Markovitz, David M; Cao, Hong; Zhou, Yan-Hong

NF-κB activation, pathogen invasion, polymorphonuclear leukocytes (PMN) transmigration (PMNT) across the blood-brain barrier (BBB) are the pathogenic triad hallmark features of bacterial meningitis, but the mechanisms underlying these events remain largely unknown. Vimentin, which is a novel NF-κB regulator, is the primary receptor for the major Escherichia coli K1 virulence factor IbeA that contributes to the pathogenesis of neonatal bacterial sepsis and meningitis (NSM). We have previously shown that IbeA-induced NF-κB signaling through its primary receptor vimentin as well as its co-receptor PTB-associated splicing factor (PSF) is required for pathogen penetration and leukocyte transmigration across the BBB. This is the first in vivo study to demonstrate how vimentin and related factors contributed to the pathogenic triad of bacterial meningitis. The role of vimentin in IbeA+ E. coli K1-induced NF-κB activation, pathogen invasion, leukocyte transmigration across the BBB has now been demonstrated by using vimentin knockout (KO) mice. In the in vivo studies presented here, IbeA-induced NF-κB activation, E. coli K1 invasion and polymorphonuclear neutrophil (PMN) transmigration across the BBB were significantly reduced in Vim-/- mice. Decreased neuronal injury in the hippocampal dentate gyrus was observed in Vim-/- mice with meningitis. The major inflammatory regulator α7 nAChR and several signaling molecules contributing to NF-κB activation (p65 and p-CamKII) were significantly reduced in the brain tissues of the Vim-/- mice with E. coli meningitis. Furthermore, Vim KO resulted in significant reduction in neuronal injury and in α7 nAChR-mediated calcium signaling. Vimentin, a novel NF-κB regulator, plays a detrimental role in the host defense against meningitic infection by modulating the NF-κB signaling pathway to increase pathogen invasion, PMN recruitment, BBB permeability and neuronal inflammation. Our findings provide the first evidence for Vim-dependent mechanisms underlying the pathogenic triad of bacterial meningitis.

Vimentin, a Novel NF-κB Regulator, Is Required for Meningitic Escherichia coli K1-Induced Pathogen Invasion and PMN Transmigration across the Blood-Brain Barrier

PubMed Central

Zhang, Bao; Liu, Li-Qun; Wu, Xuedong; Mor-Vaknin, Nirit; Markovitz, David M.; Cao, Hong; Zhou, Yan-Hong

2016-01-01

Background NF-κB activation, pathogen invasion, polymorphonuclear leukocytes (PMN) transmigration (PMNT) across the blood-brain barrier (BBB) are the pathogenic triad hallmark features of bacterial meningitis, but the mechanisms underlying these events remain largely unknown. Vimentin, which is a novel NF-κB regulator, is the primary receptor for the major Escherichia coli K1 virulence factor IbeA that contributes to the pathogenesis of neonatal bacterial sepsis and meningitis (NSM). We have previously shown that IbeA-induced NF-κB signaling through its primary receptor vimentin as well as its co-receptor PTB-associated splicing factor (PSF) is required for pathogen penetration and leukocyte transmigration across the BBB. This is the first in vivo study to demonstrate how vimentin and related factors contributed to the pathogenic triad of bacterial meningitis. Methodology/Principal Findings The role of vimentin in IbeA+ E. coli K1-induced NF-κB activation, pathogen invasion, leukocyte transmigration across the BBB has now been demonstrated by using vimentin knockout (KO) mice. In the in vivo studies presented here, IbeA-induced NF-κB activation, E. coli K1 invasion and polymorphonuclear neutrophil (PMN) transmigration across the BBB were significantly reduced in Vim-/- mice. Decreased neuronal injury in the hippocampal dentate gyrus was observed in Vim-/- mice with meningitis. The major inflammatory regulator α7 nAChR and several signaling molecules contributing to NF-κB activation (p65 and p-CamKII) were significantly reduced in the brain tissues of the Vim-/- mice with E. coli meningitis. Furthermore, Vim KO resulted in significant reduction in neuronal injury and in α7 nAChR-mediated calcium signaling. Conclusion/Significance Vimentin, a novel NF-κB regulator, plays a detrimental role in the host defense against meningitic infection by modulating the NF-κB signaling pathway to increase pathogen invasion, PMN recruitment, BBB permeability and neuronal inflammation. Our findings provide the first evidence for Vim-dependent mechanisms underlying the pathogenic triad of bacterial meningitis. PMID:27657497

The origin of Cu/Au ratios in porphyry-type ore deposits.

PubMed

Halter, Werner E; Pettke, Thomas; Heinrich, Christoph A

2002-06-07

Microanalysis of major and trace elements in sulfide and silicate melt inclusions by laser-ablation inductively coupled plasma mass spectrometry indicates a direct link between a magmatic sulfide liquid and the composition of porphyry-type ore deposits. Copper (Cu), gold (Au), and iron (Fe) are first concentrated in a sulfide melt during magmatic evolution and then released to an ore-forming hydrothermal fluid exsolved late in the history of a magma chamber. The composition of sulfide liquids depends on the initial composition and source of the magma, but it also changes during the evolution of the magma in the crust. Magmatic sulfide melts may exert the dominant direct control on the economic metal ratios of porphyry-type ore deposits.

Additive Manufacturing of NiTiHf High Temperature Shape Memory Alloy

NASA Technical Reports Server (NTRS)

Benafan, Othmane; Bigelow, Glen S.; Elahinia, Mohammad; Moghaddam, Narges Shayesteh; Amerinatanzi, Amirhesam; Saedi, Soheil; Toker, Guher Pelin; Karaca, Haluk

2017-01-01

Additive manufacturing of a NiTi-20Hf high temperature shape memory alloy (HTSMA) was investigated. A selective laser melting (SLM) process by Phenix3D Systems was used to develop components from NiTiHf powder (of approximately 25-75 m particle fractions), and the thermomechanical response was compared to the conventionally vacuum induction skull melted counterpart. Transformation temperatures of the SLM material were found to be slightly lower due to the additional oxygen pick up from the gas atomization and melting process. The shape memory response in compression was measured for stresses up to 500 MPa, and transformation strains were found to be very comparable (Up to 1.26 for the as-extruded; up to 1.52 for SLM).

Identification and characterization of metallo-β-lactamases producing Pseudomonas aeruginosa clinical isolates in University Hospital from Zanjan Province, Iran.

PubMed

Doosti, Masoumeh; Ramazani, Ali; Garshasbi, Maryam

2013-01-01

Infectious by Pseudomonas aeruginosa has spread worldwide and metallo-beta-lactamases (MBL) are being reported with increasing frequency. The aim of this study was to investigate the antibiotic susceptibility and distribution of blaVIM and blaIMP genes in P. aeruginosa isolates from Zanjan Province of Iran. A total of 70 P. aeruginosa isolates were identified from patients admitted at intensive care units. The antimicrobial susceptibility was tested by disk diffusion (Kirby-Bauer) method and for production of MBL using double-disk synergy test (DDST). After DNA extraction, the presence of blaVIM and blaIMP genes and class 1 integron were detected by PCR. Most of the isolates were resistant to meropenem, cefotaxime and imipenem (IPM). Also, 44/70 (62.85%) IPM resistant isolates were confirmed by DDST. Of the 44 clinical isolates, 41 (93%) isolates showed MIC≥4 µg/ml for IPM. Based on the DDST results, 36 (87.8%) were confirmed to be MBL producers. PCR amplification showed that 23/41 (56%) carried blaVIM and 10/41 (24.3%) possessed blaIMP gene. Also, 31/44 (70.5%) isolates contained class 1 integron gene. Our results highlight that the genes for Verona integron-encoded metallo-β-lactamase, IPM β-lactamases and class 1 integrons were predominantly present among the IPM-resistant P. aeruginosa tested in our province and also the frequency of blaVIM type is higher than blaIMP. This is the first report of P. aeruginosa strains producing blaIMP with high frequency from Zanjan province of Iran.

Conceptual Model of Quantities, Units, Dimensions, and Values

NASA Technical Reports Server (NTRS)

Rouquette, Nicolas F.; DeKoenig, Hans-Peter; Burkhart, Roger; Espinoza, Huascar

2011-01-01

JPL collaborated with experts from industry and other organizations to develop a conceptual model of quantities, units, dimensions, and values based on the current work of the ISO 80000 committee revising the International System of Units & Quantities based on the International Vocabulary of Metrology (VIM). By providing support for ISO 80000 in SysML via the International Vocabulary of Metrology (VIM), this conceptual model provides, for the first time, a standard-based approach for addressing issues of unit coherence and dimensional analysis into the practice of systems engineering with SysML-based tools. This conceptual model provides support for two kinds of analyses specified in the International Vocabulary of Metrology (VIM): coherence of units as well as of systems of units, and dimension analysis of systems of quantities. To provide a solid and stable foundation, the model for defining quantities, units, dimensions, and values in SysML is explicitly based on the concepts defined in VIM. At the same time, the model library is designed in such a way that extensions to the ISQ (International System of Quantities) and SI Units (Systeme International d Unites) can be represented, as well as any alternative systems of quantities and units. The model library can be used to support SysML user models in various ways. A simple approach is to define and document libraries of reusable systems of units and quantities for reuse across multiple projects, and to link units and quantity kinds from these libraries to Unit and QuantityKind stereotypes defined in SysML user models.

Deep Brain Stimulation for Essential Tremor: Aligning Thalamic and Posterior Subthalamic Targets in 1 Surgical Trajectory.

PubMed

Bot, Maarten; van Rootselaar, Fleur; Contarino, Maria Fiorella; Odekerken, Vincent; Dijk, Joke; de Bie, Rob; Schuurman, Richard; van den Munckhof, Pepijn

2017-12-21

Ventral intermediate nucleus (VIM) deep brain stimulation (DBS) and posterior subthalamic area (PSA) DBS suppress tremor in essential tremor (ET) patients, but it is not clear which target is optimal. Aligning both targets in 1 surgical trajectory would facilitate exploring stimulation of either target in a single patient. To evaluate aligning VIM and PSA in 1 surgical trajectory for DBS in ET. Technical aspects of trajectories, intraoperative stimulation findings, final electrode placement, target used for chronic stimulation, and adverse and beneficial effects were evaluated. In 17 patients representing 33 trajectories, we successfully aligned VIM and PSA targets in 26 trajectories. Trajectory distance between targets averaged 7.2 (range 6-10) mm. In all but 4 aligned trajectories, optimal intraoperative tremor suppression was obtained in the PSA. During follow-up, active electrode contacts were located in PSA in the majority of cases. Overall, successful tremor control was achieved in 69% of patients. Stimulation-induced dysarthria or gait ataxia occurred in, respectively, 56% and 44% of patients. Neither difference in tremor suppression or side effects was noted between aligned and nonaligned leads nor between the different locations of chronic stimulation. Alignment of VIM and PSA for DBS in ET is feasible and enables intraoperative exploration of both targets in 1 trajectory. This facilitates positioning of electrode contacts in both areas, where multiple effective points of stimulation can be found. In the majority of aligned leads, optimal intraoperative and chronic stimulation were located in the PSA. Copyright © 2017 by the Congress of Neurological Surgeons

Unexpected mechanisms of resistance in Dutch Pseudomonas aeruginosa isolates collected during fourteen years of surveillance.

PubMed

Croughs, P D; Klaassen, C H W; van Rosmalen, J; Maghdid, D M; Boers, S A; Hays, J P; Goessens, W H F

2018-05-14

Pseudomonas aeruginosa is one of the most important causes of infection in the intensive care unit. It is intrinsically resistant to many antibiotics and easily acquires additional resistance genes via horizontal gene transfer of mobile genetic elements. In the present study, 1,528 P. aeruginosa isolates, obtained from a Dutch national surveillance program between the years 1998 and 2011, were analyzed for the presence of Extended Spectrum β-Lactamase (ESBL) genes bla CTX-M , bla SHV , bla TEM , bla BEL , bla PER , bla VEB , bla OXA-10 and metallo-β-Lactamase (MBL) genes bla IMP , bla VIM and bla NDM . Six percent of ceftazidime-resistant isolates tested positive for ESBL and a Verona Integron-Encoded Metallo-β-Lactamase (VIM) gene was found in 3% of the isolates that were phenotypically resistant to imipenem, and/or meropenem. Genotyping of ESBL-positive isolates indicated ST1216, ST111, and ST622 genotypes, with all VIM-positive isolates belonging to the ST111 clone. Although the prevalence of ESBL and MBL phenotypes in this Dutch national surveillance collection of over 1500 ICU P. aeruginosa isolates was very low, all VIM-producing isolates belonged to the high risk-associated, international, clonal complex CC111 and most ESBL-producing isolates belonged to clonal complexes known for their successful spread e.g. CC111 and CC235. The current data indicates that high risk clones of P. aeruginosa were present in the Netherlands between 1998-2011 and probably spread unnoticed throughout Dutch hospitals. Copyright © 2018. Published by Elsevier B.V.

Boron and Zirconium from Crucible Refractories in a Complex Heat-Resistant Alloy

NASA Technical Reports Server (NTRS)

Decker, R F; Rowe, John P; Freeman, J W

1958-01-01

In a laboratory study of the factors involved in the influence of induction vacuum melting on 55ni-20cr-15co-4mo-3ti-3al heat resistant alloy, it was found that the major factor was the type of ceramic used as the crucible. The study concluded that trace amounts of boron or zirconium derived from reaction of the melt with the crucible refactories improved creep-rupture properties at 1,600 degrees F. Boron was most effective and, in addition, markedly improved hot-workability.

VIMS Observations of Titan During the First Two Close Flybys by the Cassini-Huygens Mission

NASA Technical Reports Server (NTRS)

Rodriquez, S.; LeMouelic, S.; Sotin, C.; Buratti, B. J.; Brown, R. H.

2005-01-01

The joint NASA-ESA-ASI Cassini-Huygens mission reached the saturnian system on July 1st 2004. It started the observations of Saturn s environment including its atmosphere, rings, and satellites (Phoebe, Iapetus and Titan). Titan, one of the primary scientific interests of the mission, is veiled by an ubiquitous thick haze. Its surface cannot be seen in the visible but as the haze effects decrease with increasing wavelength, there is signal in the infrared atmospheric windows if no clouds are present. Onboard the Cassini spacecraft, the VIMS instrument (Visual and Infrared Mapping Spectrometer) is expected to pierce the veil of the hazy moon and successfully image its surface in the infrared wavelengths, taking hyperspectral images in the range 0.4 to 5.2 micron. On 26 October (TA) and 13 December 2004 (TB), the Cassini-Huygens mission flew over Titan at an altitude lower than 1200 km at closest approach. VIMS acquired several tens of image cubes with spatial resolution ranging from a few tens of kilometers down to 1.5 kilometer per pixel, demonstrating its capability for studying Titan s geology.

Imipenem resistance in clinical Escherichia coli from Qom, Iran.

PubMed

Shams, Saeed; Hashemi, Ali; Esmkhani, Mohammad; Kermani, Somaye; Shams, Elham; Piccirillo, Alessandra

2018-05-18

The emergence of metallo-β-lactamase-producing Enterobacteriaceae is a worldwide health concern. In this study, the first evaluation of MBL genes, bla IMP and bla VIM , in Escherichia coli resistant to imipenem isolated from urine and blood specimens in Qom, Iran is described. Three hundred urine and blood specimens were analysed to detect the presence of E. coli. Resistance to imipenem and other antimicrobials was determined by disk diffusion and MIC. MBL production was screened using CDDT. PCR was also carried out to determine the presence of bla IMP and bla VIM genes in imipenem-resistant isolates. In total, 160 E. coli isolates were collected from March to May 2016. According to disk diffusion, high-level of resistance (20%) to cefotaxime was observed, whereas the lowest (1%) was detected for tetracycline. In addition, five isolates showed resistance to imipenem with a MIC ≥ 4 µg/mL. CDDT test confirmed that five isolates were MBL-producing strains, but no bla IMP and bla VIM genes were detected. Results of this study show a very low level of resistance to imipenem in our geographical area.

Recovery of Na-glucose cotransport activity after renal ischemia is impaired in mice lacking vimentin.

PubMed

Runembert, Isabelle; Couette, Sylviane; Federici, Pierre; Colucci-Guyon, Emma; Babinet, Charles; Briand, Pascale; Friedlander, Gérard; Terzi, Fabiola

2004-11-01

Vimentin, an intermediate filament protein mainly expressed in mesenchyma-derived cells, is reexpressed in renal tubular epithelial cells under many pathological conditions, characterized by intense cell proliferation. Whether vimentin reexpression is only a marker of cell dedifferentiation or is instrumental in the maintenance of cell structure and/or function is still unknown. Here, we used vimentin knockout mice (Vim(-/-)) and an experimental model of acute renal injury (30-min bilateral renal ischemia) to explore the role of vimentin. Bilateral renal ischemia induced an initial phase of acute tubular necrosis that did not require vimentin and was similar, in terms of morphological and functional changes, in Vim(+/+) and Vim(-/-) mice. However, vimentin was essential to favor Na-glucose cotransporter 1 localization to brush-border membranes and to restore Na-glucose cotransport activity in regenerating tubular cells. We show that the effect of vimentin inactivation is specific and results in persistent glucosuria. We propose that vimentin is part of a structural network that favors carrier localization to plasma membranes to restore transport activity in injured kidneys.

Crystallization of rhenium salts in a simulated low-activity waste borosilicate glass

DOE Office of Scientific and Technical Information (OSTI.GOV)

Riley, Brian J.; McCloy, John S.; Goel, Ashutosh

2013-04-01

This study presents a new method for looking at the solubility of volatile species in simulated low-activity waste glass. The present study looking at rhenium salts is also applicable to real applications involving radioactive technetium salts. In this synthesis method, oxide glass powder is mixed with the volatiles species, vacuum-sealed in a fused quartz ampoule, and then heat-treated under vacuum in a furnace. This technique restricts the volatile species to the headspace above the melt but still within the sealed ampoule, thus maximizing the volatile concentration in contact with the glass. Various techniques were used to measure the solubility ofmore » rhenium in glass and include energy dispersive spectroscopy, wavelength dispersive spectroscopy, laser ablation inductively-coupled plasma mass spectroscopy, and inductively-coupled plasma optical emission spectroscopy. The Re-solubility in this glass was determined to be ~3004 parts per million Re atoms. Above this concentration, the salts separated out of the melt as inclusions and as a low viscosity molten salt phase on top of the melt observed during and after cooling. This salt phase was analyzed with X-ray diffraction, scanning electron microscopy as well as some of the other aforementioned techniques and identified to be composed of alkali perrhenate and alkali sulfate.« less

Coating method for graphite

DOEpatents

Banker, John G.; Holcombe, Jr., Cressie E.

1977-01-01

A method of limiting carbon contamination from graphite ware used in induction melting of uranium alloys is provided comprising coating the graphite surface with a suspension of Y.sub.2 O.sub.3 particles in water containing about 1.5 to 4% by weight sodium carboxymethylcellulose.

Coating method for graphite

DOEpatents

Banker, J.G.; Holcombe, C.E. Jr.

1975-11-06

A method of limiting carbon contamination from graphite ware used in induction melting of uranium alloys is provided. The graphite surface is coated with a suspension of Y/sub 2/O/sub 3/ particles in water containing about 1.5 to 4 percent by weight sodium carboxymethylcellulose.

High resolution VIMS images of Titan's surface: implications for its composition, internal structure and dynamics

NASA Astrophysics Data System (ADS)

Sotin, C.; Le Mouelic, S.; Le Corre, L.; Barnes, J.; Brown, R. H.; Jaumann, R.; Buratti, B.; Baines, K.; Clark, R.; Nicholson, P.; Soderblom, L.

2008-12-01

With a field of view of 0.5 mrad per pixel, the VIMS (Visual and Infrared Mapping Spectrometer) onboard the Cassini spacecraft can acquire images with a resolution of 500 m per pixel at closest approach during a typical Titan flyby. This resolution is comparable to the resolution of the radar instrument and allows comparisons between the radar images and optical images in the six infrared windows where the surface can be observed. Such opportunities were not set up for the nominal tour before Saturn insertion. The opportunity was offered during the TA flyby [Sotin et al., Nature, 2005] and the results lead the Cassini program to give VIMS the prime observations during closest approach at the T24 and T38 flybys. Two different implementations were experienced. During the T24 flyby (01/29/2007), we used a push-broom mode allowing VIMS to image a long path before pointing to a specific site at the limit between the light and dark terrains. This observation allowed us to see the dunes and to infer some information on their composition [Barnes et al., Icarus, 2008], to image channels and to infer information of erosion processes of the bright equatorial regions [Jaumann et al., Icarus, in press] and to observe the strong correlation between radar images and the VIMS images over a bright area interpreted as a flow feature [Lopes et al., Icarus, 2007]. During the T38 flyby over Ontario Lacus (12/05/2007), it was decided to point to the lake and get different images which provide us with a set of observations obtained with different emergence angles. This observation allowed us to infer the liquid nature of the lake and the composition of the lake [Brown et al., Nature, 2008]. In addition, this mode gives good information on the atmospheric component and will help us remove that component to get better spectra of Titan's surface. During the extended mission, two observations are forecasted at the beginning and at the end of the Cassini Equinox Mission. The first one will happen on November 19, 2008. The VIMS has been programmed to observe the Huygens landing site area at a resolution of 1 km/pixel. Before and after this observation, the push-broom mode will be used in order to cross-cut some of the radar paths. Because Titan's spin rate may be different from synchronous [Stiles et al., 2007; Lorenz et al., 2008], there is some uncertainty on the pointing. This study will report on the results of this flyby. This work has been carried out at the JPL, Caltech, under contract with NASA.

Connectivity derived thalamic segmentation in deep brain stimulation for tremor.

PubMed

Akram, Harith; Dayal, Viswas; Mahlknecht, Philipp; Georgiev, Dejan; Hyam, Jonathan; Foltynie, Thomas; Limousin, Patricia; De Vita, Enrico; Jahanshahi, Marjan; Ashburner, John; Behrens, Tim; Hariz, Marwan; Zrinzo, Ludvic

2018-01-01

The ventral intermediate nucleus (VIM) of the thalamus is an established surgical target for stereotactic ablation and deep brain stimulation (DBS) in the treatment of tremor in Parkinson's disease (PD) and essential tremor (ET). It is centrally placed on a cerebello-thalamo-cortical network connecting the primary motor cortex, to the dentate nucleus of the contralateral cerebellum through the dentato-rubro-thalamic tract (DRT). The VIM is not readily visible on conventional MR imaging, so identifying the surgical target traditionally involved indirect targeting that relies on atlas-defined coordinates. Unfortunately, this approach does not fully account for individual variability and requires surgery to be performed with the patient awake to allow for intraoperative targeting confirmation. The aim of this study is to identify the VIM and the DRT using probabilistic tractography in patients that will undergo thalamic DBS for tremor. Four male patients with tremor dominant PD and five patients (three female) with ET underwent high angular resolution diffusion imaging (HARDI) (128 diffusion directions, 1.5 mm isotropic voxels and b value = 1500) preoperatively. Patients received VIM-DBS using an MR image guided and MR image verified approach with indirect targeting. Postoperatively, using parallel Graphical Processing Unit (GPU) processing, thalamic areas with the highest diffusion connectivity to the primary motor area (M1), supplementary motor area (SMA), primary sensory area (S1) and contralateral dentate nucleus were identified. Additionally, volume of tissue activation (VTA) corresponding to active DBS contacts were modelled. Response to treatment was defined as 40% reduction in the total Fahn-Tolosa-Martin Tremor Rating Score (FTMTRS) with DBS-ON, one year from surgery. Three out of nine patients had a suboptimal, long-term response to treatment. The segmented thalamic areas corresponded well to anatomically known counterparts in the ventrolateral (VL) and ventroposterior (VP) thalamus. The dentate-thalamic area, lay within the M1-thalamic area in a ventral and lateral location. Streamlines corresponding to the DRT connected M1 to the contralateral dentate nucleus via the dentate-thalamic area, clearly crossing the midline in the mesencephalon. Good response was seen when the active contact VTA was in the thalamic area with highest connectivity to the contralateral dentate nucleus. Non-responders had active contact VTAs outside the dentate-thalamic area. We conclude that probabilistic tractography techniques can be used to segment the VL and VP thalamus based on cortical and cerebellar connectivity. The thalamic area, best representing the VIM, is connected to the contralateral dentate cerebellar nucleus. Connectivity based segmentation of the VIM can be achieved in individual patients in a clinically feasible timescale, using HARDI and high performance computing with parallel GPU processing. This same technique can map out the DRT tract with clear mesencephalic crossing.

Improved efficiency and precise temperature control of low-frequency induction-heating pure iron vapor source on ECR ion source

NASA Astrophysics Data System (ADS)

Kato, Y.; Takenaka, T.; Yano, K.; Kiriyama, R.; Kurisu, Y.; Nozaki, D.; Muramatsu, M.; Kitagawa, A.; Uchida, T.; Yoshida, Y.; Sato, F.; Iida, T.

2012-11-01

Multiply charged ions to be used prospectively are produced from solid pure material in an electron cyclotron resonance ion source (ECRIS). Recently a pure iron source is also required for the production of caged iron ions in the fullerene in order to control cells in vivo in bio-nano science and technology. We adopt directly heating iron rod by induction heating (IH) because it has non-contact with insulated materials which are impurity gas sources. We choose molybdenum wire for the IH coils because it doesn't need water cooling. To improve power efficiency and temperature control, we propose to the new circuit without previously using the serial and parallel dummy coils (SPD) for matching and safety. We made the circuit consisted of inductively coupled coils which are thin-flat and helix shape, and which insulates the IH power source from the evaporator. This coupling coils circuit, i.e. insulated induction heating coil transformer (IHCT), can be move mechanically. The secondary current can be adjusted precisely and continuously. Heating efficiency by using the IHCT is much higher than those of previous experiments by using the SPD, because leakage flux is decreased and matching is improved simultaneously. We are able to adjust the temperature in heating the vapor source around melting point. And then the vapor pressure can be controlled precisely by using the IHCT. We can control ±10K around 1500°C by this method, and also recognize to controlling iron vapor flux experimentally in the extreme low pressures. Now we come into next stage of developing induction heating vapor source for materials with furthermore high temperature melting points above 2000K with the IHCT, and then apply it in our ECRIS.

Dehydration and melting experiments constrain the fate of subducted sediments

NASA Astrophysics Data System (ADS)

Johnson, Marie C.; Plank, Terry

1999-12-01

Geochemical tracers demonstrate that elements are cycled from subducted sediments into the arc melting regime at subduction zones, although the transfer mechanism is poorly understood. Are key elements (Th, Be, Rb) lost during sediment dehydration or is sediment melting required? To investigate this question, we conducted phase equilibria and trace element partitioning experiments on a pelagic red clay for conditions appropriate to the slab beneath arc volcanoes (2-4 GPa, 600°-1000°C). Using both piston cylinders and multianvils, we determined the solidus, phase stabilities, and major element compositions of coexisting phases. The solidus (H2O + Cl fluid-saturated) was located at 775 +/- 25°C at 2 GPa, 810 +/- 15°C at 3 GPa, and 1025 +/- 25°C at 4 GPa with noevidence for complete miscibility between melt and fluid. This sediment composition produces a profusion of phases both above and below the solidus: garnet, jadeitic pyroxene, alkali-rich amphibole, phengite, biotite, magnetite, coesite, kyanite, apatite, zircon, Cl-rich fluids, and peraluminous to peralkaline granitic melts. At 2 GPa the phengite dehydration solidus is at 800°-825°C, while biotite breaks down between 850° and 900°C. To explore trace element partitioning across the solidus at 2 GPa, we used diamonds to trap fluids and melts. Both the bulk sediment residues and diamond traps were analyzed postexperiment by inductively coupled plasma-mass spectrometry (ICP-MS) and inductively coupled plasma-atomic emission spectrometry (ICP-AES) for 40 elements for which we calculated bulk partition coefficients (D = Csolid/Cfluid). Below the solidus, Rb, Sr, Ba, and Pb showed the greatest mobility (D ~ 0.5-1.0), while at the solidus, Th and Be became notably partitioned into the melt (D values changing from >2.0 to <1.0). K and Rb D values fall below 1.0 when the micas breakdown. Only at the solidus do Th and Rb attain similar partition coefficients, a condition required by arc data. Taken together, the experimental results indicate that critical elements (Th and Be) require sediment melting to be efficiently transferred to the arc. This conclusion is at odds with most thermal models for subduction zones, which predict slab temperatures more than 100°C lower than sediment solidi. Thus the condition of sediment melting (with oceanic crust dehydration) may provide new constraints on the next generation of thermal/geodynamical models of subduction zones.

Dehydration and melting experiments constrain the fate of subducted sediments

NASA Astrophysics Data System (ADS)

Johnson, Marie C.; Plank, Terry

2000-12-01

Geochemical tracers demonstrate that elements are cycled from subducted sediments into the arc melting regime at subduction zones, although the transfer mechanism is poorly understood. Are key elements (Th, Be, Rb) lost during sediment dehydration or is sediment melting required? To investigate this question, we conducted phase equilibria and trace element partitioning experiments on a pelagic red clay for conditions appropriate to the slab beneath arc volcanoes (2-4 GPa, 600°-1000°C). Using both piston cylinders and multianvils, we determined the solidus, phase stabilities, and major element compositions of coexisting phases. The solidus (H2O + Cl fluid-saturated) was located at 775 ± 25°C at 2 GPa, 810 ± 15°C at 3 GPa, and 1025 ± 25°C at 4 GPa with noevidence for complete miscibility between melt and fluid. This sediment composition produces a profusion of phases both above and below the solidus: garnet, jadeitic pyroxene, alkali-rich amphibole, phengite, biotite, magnetite, coesite, kyanite, apatite, zircon, Cl-rich fluids, and peraluminous to peralkaline granitic melts. At 2 GPa the phengite dehydration solidus is at 800°-825°C, while biotite breaks down between 850° and 900°C. To explore trace element partitioning across the solidus at 2 GPa, we used diamonds to trap fluids and melts. Both the bulk sediment residues and diamond traps were analyzed postexperiment by inductively coupled plasma-mass spectrometry (ICP-MS) and inductively coupled plasma-atomic emission spectrometry (ICP-AES) for 40 elements for which we calculated bulk partition coefficients (D = Csolid/Cfluid). Below the solidus, Rb, Sr, Ba, and Pb showed the greatest mobility (D ˜ 0.5-1.0), while at the solidus, Th and Be became notably partitioned into the melt (D values changing from >2.0 to <1.0). K and Rb D values fall below 1.0 when the micas breakdown. Only at the solidus do Th and Rb attain similar partition coefficients, a condition required by arc data. Taken together, the experimental results indicate that critical elements (Th and Be) require sediment melting to be efficiently transferred to the arc. This conclusion is at odds with most thermal models for subduction zones, which predict slab temperatures more than 100°C lower than sediment solidi. Thus the condition of sediment melting (with oceanic crust dehydration) may provide new constraints on the next generation of thermal/geodynamical models of subduction zones.

Understanding homogeneous nucleation in solidification of aluminum by molecular dynamics simulations

NASA Astrophysics Data System (ADS)

Mahata, Avik; Asle Zaeem, Mohsen; Baskes, Michael I.

2018-02-01

Homogeneous nucleation from aluminum (Al) melt was investigated by million-atom molecular dynamics simulations utilizing the second nearest neighbor modified embedded atom method potentials. The natural spontaneous homogenous nucleation from the Al melt was produced without any influence of pressure, free surface effects and impurities. Initially isothermal crystal nucleation from undercooled melt was studied at different constant temperatures, and later superheated Al melt was quenched with different cooling rates. The crystal structure of nuclei, critical nucleus size, critical temperature for homogenous nucleation, induction time, and nucleation rate were determined. The quenching simulations clearly revealed three temperature regimes: sub-critical nucleation, super-critical nucleation, and solid-state grain growth regimes. The main crystalline phase was identified as face-centered cubic, but a hexagonal close-packed (hcp) and an amorphous solid phase were also detected. The hcp phase was created due to the formation of stacking faults during solidification of Al melt. By slowing down the cooling rate, the volume fraction of hcp and amorphous phases decreased. After the box was completely solid, grain growth was simulated and the grain growth exponent was determined for different annealing temperatures.

Magma oceans and enhanced volcanism on TRAPPIST-1 planets due to induction heating

NASA Astrophysics Data System (ADS)

Kislyakova, K. G.; Noack, L.; Johnstone, C. P.; Zaitsev, V. V.; Fossati, L.; Lammer, H.; Khodachenko, M. L.; Odert, P.; Guedel, M.

2017-10-01

Low-mass M stars are plentiful in the Universe and often host small, rocky planets detectable with the current instrumentation. Recently, seven small planets have been discovered orbiting the ultracool dwarf TRAPPIST-1 te{Gillon16,Gillon17}. We examine the role of electromagnetic induction heating of these planets, caused by the star's rotation and the planet's orbital motion. If the stellar rotation and magnetic dipole axes are inclined with respect to each other, induction heating can melt the upper mantle and enormously increase volcanic activity, sometimes producing a magma ocean below the planetary surface. We show that induction heating leads the three innermost planets, one of which is in the habitable zone, to either evolve towards a molten mantle planet, or to experience increased outgassing and volcanic activity, while the four outermost planets remain mostly unaffected.

Numerical investigation of the transport phenomena occurring in the growth of SiC by the induction heating TSSG method

NASA Astrophysics Data System (ADS)

Yamamoto, Takuya; Adkar, Nikhil; Okano, Yasunori; Ujihara, Toru; Dost, Sadik

2017-09-01

A numerical simulation study was carried out to examine the transport phenomena occurring during the Top-Seeded Solution Growth (TSSG) process of SiC. The simulation model includes the contributions of radiative and conductive heat transfer in the furnace, mass transfer and fluid flow in the melt, and the induced electric and magnetic fields. Results show that the induced Lorentz force is dominant in the melt compared with that of buoyancy. At the relatively low coil frequencies, the effect of the Lorentz force on the melt flow is significant, and the corresponding flow patterns loose their axisymmetry and become almost fully disturbed. However, at the relatively higher frequency values, the flow is steady and the flow patterns remain axisymmetric.

[Characterization of isolates of carbapenemase-producing Pseudomonas aeruginosa from seven Colombian provinces].

PubMed

Saavedra, Sandra Yamile; Duarte, Carolina; González, María Nilse; Realpe, María Elena

2014-04-01

Pseudomonas aeruginosa is an opportunistic pathogen that causes multiple infections in hospitalized patients. This microorganism has developed resistance to several antimicrobial agents, including carbapenems, which are considered to be the last therapeutic option against these infections. Carbapenem resistance of P. aeruginosa is mediated by different mechanisms: Carbapenemases class B (MBL) and A, alterations in the OprD expression and overexpression of the Mex efflux pump. To describe the presence of carbapenemases in P. aeruginosa isolates from seven Colombian provinces. A total of 57 P. aeruginosa isolates were collected between September 2012 and March 2013 from national surveillance in Colombia and were sent to the Grupo de Microbiología at the Instituto Nacional de Salud (INS) for evaluation. Iidentification and antimicrobial susceptibility were confirmed through automated method (Vitek ® 2) and disk diffusion (Kirby-Bauer) according to the Clinical and Laboratory Standards Institute, CLSI, 2013. Phenotypic and genotypic confirmation was determined using the modified Hodge test (MHT), a synergism test using imipenem, EDTA-SMA and meropenem, and conventional PCR to detect the bla KPC, bla VIM, bla IMP and bla NDM genes. Of the 57 isolates, two showed sensitivity to carbapenems. Forty-three isolates were positive for carbapenemases with a high percentage of sensitivity to colistin (76.4%, n=42). The 43 isolates producing carbapenemases showed multiple drug resistance: 72.1% were positive in the MHT and 79.1% showed MBL synergism. PCR amplification confirmed that 33 isolates were positive for bla VIM, nine were positive for bla KPC and one isolate expressed both KPC and VIM carbapenemases. No isolates showed amplified products with bla IMP and bla NDM primers. The most frequent carbapenemase was VIM, followed by KPC in an approximate ratio of 3:1.

Differentially expressed proteins in glioblastoma multiforme identified with a nanobody-based anti-proteome approach and confirmed by OncoFinder as possible tumor-class predictive biomarker candidates

PubMed Central

Jovčevska, Ivana; Zupanec, Neja; Urlep, Žiga; Vranič, Andrej; Matos, Boštjan; Stokin, Clara Limbaeck; Muyldermans, Serge; Myers, Michael P.; Buzdin, Anton A.; Petrov, Ivan; Komel, Radovan

2017-01-01

Glioblastoma multiforme is the most frequent primary malignancy of the central nervous system. Despite remarkable progress towards an understanding of tumor biology, there is no efficient treatment and patient outcome remains poor. Here, we present a unique anti-proteomic approach for selection of nanobodies specific for overexpressed glioblastoma proteins. A phage-displayed nanobody library was enriched in protein extracts from NCH644 and NCH421K glioblastoma cell lines. Differential ELISA screenings revealed seven nanobodies that target the following antigens: the ACTB/NUCL complex, VIM, NAP1L1, TUFM, DPYSL2, CRMP1, and ALYREF. Western blots showed highest protein up-regulation for ALYREF, CRMP1, and VIM. Moreover, bioinformatic analysis with the OncoFinder software against the complete “Cancer Genome Atlas” brain tumor gene expression dataset suggests the involvement of different proteins in the WNT and ATM pathways, and in Aurora B, Sem3A, and E-cadherin signaling. We demonstrate the potential use of NAP1L1, NUCL, CRMP1, ACTB, and VIM for differentiation between glioblastoma and lower grade gliomas, with DPYSL2 as a promising “glioma versus reference” biomarker. A small scale validation study confirmed significant changes in mRNA expression levels of VIM, DPYSL2, ACTB and TRIM28. This work helps to fill the information gap in this field by defining novel differences in biochemical profiles between gliomas and reference samples. Thus, selected genes can be used to distinguish glioblastoma from lower grade gliomas, and from reference samples. These findings should be valuable for glioblastoma patients once they are validated on a larger sample size. PMID:28498803

Vection is the main contributor to motion sickness induced by visual yaw rotation: Implications for conflict and eye movement theories

PubMed Central

Pretto, Paolo; Oberfeld, Daniel; Hecht, Heiko; Bülthoff, Heinrich H.

2017-01-01

This study investigated the role of vection (i.e., a visually induced sense of self-motion), optokinetic nystagmus (OKN), and inadvertent head movements in visually induced motion sickness (VIMS), evoked by yaw rotation of the visual surround. These three elements have all been proposed as contributing factors in VIMS, as they can be linked to different motion sickness theories. However, a full understanding of the role of each factor is still lacking because independent manipulation has proven difficult in the past. We adopted an integrative approach to the problem by obtaining measures of potentially relevant parameters in four experimental conditions and subsequently combining them in a linear mixed regression model. To that end, participants were exposed to visual yaw rotation in four separate sessions. Using a full factorial design, the OKN was manipulated by a fixation target (present/absent), and vection strength by introducing a conflict in the motion direction of the central and peripheral field of view (present/absent). In all conditions, head movements were minimized as much as possible. Measured parameters included vection strength, vection variability, OKN slow phase velocity, OKN frequency, the number of inadvertent head movements, and inadvertent head tilt. Results show that VIMS increases with vection strength, but that this relation varies among participants (R2 = 0.48). Regression parameters for vection variability, head and eye movement parameters were not significant. These results may seem to be in line with the Sensory Conflict theory on motion sickness, but we argue that a more detailed definition of the exact nature of the conflict is required to fully appreciate the relationship between vection and VIMS. PMID:28380077

Attenuating astrocyte activation accelerates plaque pathogenesis in APP/PS1 mice

PubMed Central

Kraft, Andrew W.; Hu, Xiaoyan; Yoon, Hyejin; Yan, Ping; Xiao, Qingli; Wang, Yan; Gil, So Chon; Brown, Jennifer; Wilhelmsson, Ulrika; Restivo, Jessica L.; Cirrito, John R.; Holtzman, David M.; Kim, Jungsu; Pekny, Milos; Lee, Jin-Moo

2013-01-01

The accumulation of aggregated amyloid-β (Aβ) in amyloid plaques is a neuropathological hallmark of Alzheimer's disease (AD). Reactive astrocytes are intimately associated with amyloid plaques; however, their role in AD pathogenesis is unclear. We deleted the genes encoding two intermediate filament proteins required for astrocyte activation—glial fibrillary acid protein (Gfap) and vimentin (Vim)—in transgenic mice expressing mutant human amyloid precursor protein and presenilin-1 (APP/PS1). The gene deletions increased amyloid plaque load: APP/PS1 Gfap−/−Vim−/− mice had twice the plaque load of APP/PS1 Gfap+/+Vim+/+ mice at 8 and 12 mo of age. APP expression and soluble and interstitial fluid Aβ levels were unchanged, suggesting that the deletions had no effect on APP processing or Aβ generation. Astrocyte morphology was markedly altered by the deletions: wild-type astrocytes had hypertrophied processes that surrounded and infiltrated plaques, whereas Gfap−/−Vim−/− astrocytes had little process hypertrophy and lacked contact with adjacent plaques. Moreover, Gfap and Vim gene deletion resulted in a marked increase in dystrophic neurites (2- to 3-fold higher than APP/PS1 Gfap+/+Vim+/+ mice), even after normalization for amyloid load. These results suggest that astrocyte activation limits plaque growth and attenuates plaque-related dystrophic neurites. These activities may require intimate contact between astrocyte and plaque.—Kraft, A. W., Hu, X., Yoon, H., Yan, P., Xiao, Q., Wang, Y., Gil, S. C., Brown, J., Wilhelmsson, U., Restivo, J. L., Cirrito, J. R., Holtzman, D. M., Kim, J., Pekny, M., Lee, J.-M. Attenuating astrocyte activation accelerates plaque pathogenesis in APP/PS1 mice. PMID:23038755

Evolution of a Dark Anti-Cyclone on Saturn Associated with the Great Lightning Storm of 2010/2011 Through the Eyes of Cassini/VIMS

NASA Astrophysics Data System (ADS)

Momary, Thomas W.; Baines, K. H.; Brown, R. H.; Buratti, B. J.; Clark, R. N.; Nicholson, P. D.; Sotin, C.

2012-10-01

A massive dark anti-cyclonic storm system on Saturn spanning some 7∘ of longitude and 2∘ of latitude was observed by Cassini/VIMS at a planetocentric latitude of 37∘ on 4 January 2012 and 26 January 2012. During this time, it drifted some 54∘ of longitude at a speed of 23.1 ± 0.2 m/s prograde, a drift speed which correlates well with the canonical Voyager (and VIMS) wind profiles for Saturn at this latitude. The spot also drifted northward during this time by 1∘ and became noticeably "squished" in morphology. Using this drift rate and extrapolating backward, we find that the position corresponds to the large (> 5,000 km) anti-cyclone observed by VIMS on 11 May 2011 at 35.4∘ latitude (pc) and 49.4∘ W. longitude. This would represent 8 months of observation of this titanic feature, which was associated with the major lightning storm of 2010-2011, following the spot as it changed in size and morphology and drifted northward. The spot underwent a dramatic shift in shape in the 3 weeks of January, changing from roughly oval to a highly elongated pancake shape as it apparently bumped up against the dark band at 40∘ latitude and experienced a powerful shear. The evolution suggests that we are watching the death throes of this feature in our most recent observations. Finally, the dark spot was darker than surrounding regions in May 2011 and maintained its dark color across all pseudo-continua from 1.0 to 4.0 μm between May 2011 and early January 2012.

Parametric study on the vortex-induced motions of semi-submersibles: Effect of rounded ratios of the column and pontoon

NASA Astrophysics Data System (ADS)

Liu, Mingyue; Xiao, Longfei; Yang, Jianmin; Tian, Xinliang

2017-05-01

The vortex-induced motions (VIMs) of semi-submersibles have emerged as an important issue in offshore engineering, as they pose a threat to safe and reliable operations and severely affect the fatigue lives of risers and mooring systems. The VIM response depends on the shape of the submerged structure and thus is significantly influenced by the design parameters related to the columns and pontoons. Numerical simulations by the detached Eddy simulation method are validated by experimental data and then used for parametric analysis of the VIM performance of various semi-submersibles with different column rounded ratios (Rc/L ) and pontoon rounded ratios (Rp/Lp ). The results show that the transverse amplitudes of a semi-submersible with circular columns at a 0° current heading are twice as large as those at a 45° current heading. However, the semi-submersible with rounded square columns shows more significant transverse motions at a 45° current heading than at a 0° current heading. Furthermore, at the 45° current heading, the transverse amplitudes of the semi-submersibles show a rapid increase as the column radius increases in the range of Rc/L <0.1 . The peak values remain roughly the same for 0.1 ≤Rc/L ≤0.2 and then decrease as the column radius increases (Rc/L ≥0.3 ). In addition, the effect of the pontoon shape on the transverse response is negligible for semi-submersibles with sharp square columns, while for semi-submersibles with rounded square columns or circular columns, the sharp rectangular pontoons greatly mitigate the VIM response.

Search for and limits on plume activity on Mimas, Tethys, and Dione with the Cassini Visual Infrared Mapping Spectrometer (VIMS)

USGS Publications Warehouse

Buratti, B.J.; Faulk, S.P.; Mosher, J.; Baines, K.H.; Brown, R.H.; Clark, R.N.; Nicholson, P.D.

2011-01-01

Cassini Visual Infrared Mapping Spectrometer (VIMS) observations of Mimas, Tethys, and Dione obtained during the nominal and extended missions at large solar phase angles were analyzed to search for plume activity. No forward scattered peaks in the solar phase curves of these satellites were detected. The upper limit on water vapor production for Mimas and Tethys is one order of magnitude less than the production for Enceladus. For Dione, the upper limit is two orders of magnitude less, suggesting this world is as inert as Rhea (Pitman, K.M., Buratti, B.J., Mosher, J.A., Bauer, J.M., Momary, T., Brown, R.H., Nicholson, P.D., Hedman, M.M. [2008]. Astrophys. J. Lett. 680, L65-L68). Although the plumes are best seen at ???2.0. ??m, Imaging Science Subsystem (ISS) Narrow Angle Camera images obtained at the same time as the VIMS data were also inspected for these features. None of the Cassini ISS images shows evidence for plumes. The absence of evidence for any Enceladus-like plumes on the medium-sized saturnian satellites cannot absolutely rule out current geologic activity. The activity may below our threshold of detection, or it may be occurring but not captured on the handful of observations at large solar phase angles obtained for each moon. Many VIMS and ISS images of Enceladus at large solar phase angles, for example, do not contain plumes, as the active "tiger stripes" in the south pole region are pointed away from the spacecraft at these times. The 7-year Cassini Solstice Mission is scheduled to gather additional measurements at large solar phase angles that are capable of revealing activity on the saturnian moons. ?? 2011 Elsevier Inc.

The Saturnian satellite Rhea as seen by Cassini VIMS

USGS Publications Warehouse

Stephan, K.; Jaumann, R.; Wagner, R.; Clark, R.N.; Cruikshank, D.P.; Giese, B.; Hibbitts, C.A.; Roatsch, T.; Matz, K.-D.; Brown, R.H.; Filacchione, G.; Cappacioni, F.; Scholten, F.; Buratti, B.J.; Hansen, G.B.; Nicholson, P.D.; Baines, K.H.; Nelson, R.M.; Matson, D.L.

2012-01-01

Since the arrival of the Cassini spacecraft at Saturn in June 2004, the Visual and Infrared Mapping Spectrometer has obtained new spectral data of the icy satellites of Saturn in the spectral range from 0.35 to 5.2 ??m. Numerous flybys were performed at Saturn's second largest satellite Rhea, providing a nearly complete coverage with pixel-ground resolutions sufficient to analyze variations of spectral properties across Rhea's surface in detail. We present an overview of the VIMS observations obtained so far, as well as the analysis of the spectral properties identified in the VIMS spectra and their variations across its surface compared with spatially highly resolved Cassini ISS images and digital elevation models. Spectral variations measured across Rhea's surface are similar to the variations observed in the VIMS observations of its neighbor Dione, implying similar processes causing or at least inducing their occurrence. Thus, magnetospheric particles and dust impacting onto the trailing hemisphere appear to be responsible for the concentration of dark rocky/organic material and minor amounts of CO 2 in the cratered terrain on the trailing hemisphere. Despite the prominent spectral signatures of Rhea's fresh impact crater Inktomi, radiation effects were identified that also affect the H 2O ice-rich cratered terrain of the leading hemisphere. The concentration of H 2O ice in the vicinity of steep tectonic scarps near 270??W and geologically fresh impact craters implies that Rhea exhibits an icy crust at least in the upper few kilometers. Despite the evidence for past tectonic events, no indications of recent endogenically powered processes could be identified in the Cassini data. ?? 2011 Elsevier Ltd. All rights reserved.

Titan's Surface Composition from the Cassini Visual and Infrared Mapping Spectrometer (VIMS) Investigation

NASA Astrophysics Data System (ADS)

McCord, T. B.; Griffith, C. A.; Hansen, G. B.; Lunine, J. I.; Baines, K. H.; Brown, R. H.; Buratti, B.; Clark, R. N.; Cruikshank, D. P.; Filacchione, G.; Jaumann, R.; Hibbitts, C. A.; Sotine, C.; Cassini VIMS

2004-11-01

Titan, the largest satellite of Saturn, has a thick atmosphere containing methane with high altitude haze that obscures the surface except for windows in the methane absorption bands at some IR wavelengths where scattering also is reduced. Chemistry models of the atmosphere suggest deep deposits of organic liquids and solids (1). Groundbased telescopic observations of Titan's integral disk suggest the presence of water ice (2). The Cassini VIMS obtained spectra in the 0.35 to 5.1 μm range that include narrow windows in the methane spectrum near 1.6, 2.0, 2.8, and 5.0 μm where the surface might have been observed with spatial resolution up to about 100 x 200 km during the Saturn orbit insertion phase on June 30 2004. Surface albedo features seem to appear in these windows. We have analyzed Titan's spectra in an attempt to identity the surface material(s). The VIMS spectra were averaged for several pixels for each of six regions on Titan corresponding to apparent bright and dark surface features. The spectra were calibrated to I/F as seen by VIMS and then were analyzed using radiative transfer models to remove the effects of the atmosphere (2) to estimate surface I/F values. These were then compared with candidate material reflectance at each of the spectral windows. Preliminary analysis suggests that the average results will agree with previous groundbased data analyses (2) and there is the suggestion of differences in reflectance among the surface regions analyzed so far. This work was supported by the NASA Cassini Project. (1) Lunine et al., Science, 222, 1229, 1983. (2) Coustenis et al., Icarus 118, 87, 1995; Griffith et al., Science 300, 628, 2003.

Global mapping of the surface of Titan through the haze with VIMS onboard Cassini

NASA Astrophysics Data System (ADS)

Le Mouélic, Stéphane; Cornet, Thomas; Rodriguez, Sébastien; Sotin, Christophe; Barnes, Jason W.; Brown, Robert H.; Lasue, Jérémie; Baines, K. H.; Buratti, Bonnie; Clark, Roger Nelson; Nicholson, Philip D.

2016-10-01

The Visual and Infrared Mapping Spectrometer (VIMS) onboard Cassini observes the surface of Titan through the atmosphere in seven narrow spectral windows in the infrared at 0.93, 1.08, 1.27, 1.59, 2.01, 2.68-2.78, and 4.9-5.1 microns. We have produced a global hyperspectral mosaic at 32 pixels per degrees of the complete VIMS data set of Titan between T0 (July 2004) and T120 (June 2016) flybys. We merged all the data cubes sorted by increasing spatial resolution, with the high resolution images on top of the mosaic and the low resolution images used as background. One of the main challenge in producing global spectral composition maps is to remove the seams between individual frames taken throughout the entire mission. These seams are mainly due to the widely varying viewing angles between data acquired during the different Titan flybys. These angles induce significant surface photometric effects and a strongly varying atmospheric (absorption and scattering) contribution, the scattering of the atmosphere being all the more present than the wavelength is short. We have implemented a series of empirical corrections to homogenize the maps, by correcting at first order for photometric and atmospheric scattering effects. Recently, the VIMS' IR wavelength calibration has been observed to be drifting from a total of a few nm toward longer wavelengths, the drift being almost continuously present over the course of the mission. Whereas minor at first order, this drift has implications on the homogeneity of the maps when trying to fit images taken at the beginning of the mission with images taken near the end, in particular when using channels in the narrowest atmospheric spectral windows. A correction scheme has been implemented to account for this subtle effect.

Pseudomonas aeruginosa-producing Metallo-β-lactamases (VIM, IMP, SME, and AIM) in the Clinical Isolates of Intensive Care Units, a University Hospital in Isfahan, Iran.

PubMed

Khorvash, Farzin; Yazdani, Mohammadreza; Shabani, Shiva; Soudi, Aliasghar

2017-01-01

Pseudomonas aeruginosa is a severe challenge for antimicrobial therapy, due to the chromosomal mutations or exhibition of intrinsic resistance to various antimicrobial agents such as most β-lactams. We undertook this study to evaluate the existence of SME, IMP, AIM, and VIM metallo-β-lactamases (MBL) encoding genes among P. aeruginosa strains isolated from Intensive Care Unit (ICU) patients in Al-Zahra Hospital in Isfahan, Iran. In a retrospective cross-sectional study that was conducted between March 2012 and April 2013, a total of 48 strains of P. aeruginosa were collected from clinical specimens of bedridden patients in ICU wards. Susceptibility test was performed by disc diffusion method. All of the meropenem-resistant strains were subjected to modified Hodge test for detection of carbapenemases. Multiplex polymerase chain reaction was performed for detection of blaVIM, blaIMP, blaAIM, and blaSME genes. In disk diffusion method, imipenem and meropenem showed the most and colistin the least resistant antimicrobial agents against P. aeruginosa strains. Of the 48 isolates, 36 (75%) were multidrug resistant (MDR). Amplification of β-lactamase genes showed the presence of blaVIM genes in 7 (%14.6) strains and blaIMP genes in 15 (31.3%) strains. All of the isolates were negative for blaSME and blaAIM genes. We could not find any statistically significant difference among the presence of this gene and MDR positive, age, or source of the specimen. As patients with infections caused by MBL-producing bacteria are at an intensified risk of treatment failure, fast determination of these organisms is necessary. Our findings may provide useful insights in replace of the appropriate antibiotics and may also prevent MBLs mediated resistance problem.

Improved spatial targeting with directionally segmented deep brain stimulation leads for treating essential tremor

NASA Astrophysics Data System (ADS)

Keane, Maureen; Deyo, Steve; Abosch, Aviva; Bajwa, Jawad A.; Johnson, Matthew D.

2012-08-01

Deep brain stimulation (DBS) in the ventral intermediate nucleus of thalamus (Vim) is known to exert a therapeutic effect on postural and kinetic tremor in patients with essential tremor (ET). For DBS leads implanted near the caudal border of Vim, however, there is an increased likelihood that one will also induce paresthesia side-effects by stimulating neurons within the sensory pathway of the ventral caudal (Vc) nucleus of thalamus. The aim of this computational study was to (1) investigate the neuronal pathways modulated by therapeutic, sub-therapeutic and paresthesia-inducing DBS settings in three patients with ET and (2) determine how much better an outcome could have been achieved had these patients been implanted with a DBS lead containing directionally segmented electrodes (dDBS). Multi-compartment neuron models of the thalamocortical, cerebellothalamic and medial lemniscal pathways were first simulated in the context of patient-specific anatomies, lead placements and programming parameters from three ET patients who had been implanted with Medtronic 3389 DBS leads. The models showed that in these patients, complete suppression of tremor was associated most closely with activating an average of 62% of the cerebellothalamic afferent input into Vim (n = 10), while persistent paresthesias were associated with activating 35% of the medial lemniscal tract input into Vc thalamus (n = 12). The dDBS lead design demonstrated superior targeting of the cerebello-thalamo-cortical pathway, especially in cases of misaligned DBS leads. Given the close proximity of Vim to Vc thalamus, the models suggest that dDBS will enable clinicians to more effectively sculpt current through and around thalamus in order to achieve a more consistent therapeutic effect without inducing side-effects.

Mapping the Methane and Aerosol Distributions within Titan's Troposphere: Complementing The Cassini/VIMS T90 Flyby of Titan

NASA Astrophysics Data System (ADS)

Young, Eliot

2012-10-01

Titan's atmosphere is mainly nitrogen gas with several trace constituents, including methane at the few percent level. The presence of methane has been a puzzle for decades, since the CH4 in Titan's atmosphere is expected to be destroyed by UV photolysis in ten million years or so. The source of Titan's atmospheric methane continues to be a major question. We propose a set of three STIS image cubes with the G750M grating at 0.62, 0.72 and 0.89 |*|m methane bands. These bands probe altitudes from the surface to 70 km; unlike CH4 bands at 1.6 or 2.3 |*|m, these cubes will provide a 3-D picture of Titan's troposphere {below 40 km}. The Cassini/VIMS visible channel has not been useful for this purpose for two reasons: its spectral resolution {about R=100} is coarse and its inconsistent background subtraction scheme that can lead to "stripes." HST/STIS resolves Titan's 1" disk into over 80 spatially resolved spectra, each with a spectral resolution greater than R=5000. STIS is a unique tool for mapping the 3-D distributions of CH4 and aerosols in Titan's troposphere.We request observations within a day of the Cassini flyby of Titan on April 5, 2013 around 21:40 UT in order to combine Cassini/VIMS and STIS mage cubes. Together, the visible {STIS} and IR {VIMS} image cubes will probe altitudes from the surface to the stratosphere {several hundred km}. The proposed STIS image cubes will provide the best tropospheric map of CH4 to date, relevant to surface/atmospheric coupling of CH4, latitudinal inhomogeneity of CH4 or aerosols, or the presence of condensates at low altitudes.

Thalamic DBS with a constant-current device in essential tremor: A controlled clinical trial.

PubMed

Wharen, Robert E; Okun, Michael S; Guthrie, Barton L; Uitti, Ryan J; Larson, Paul; Foote, Kelly; Walker, Harrison; Marshall, Frederick J; Schwalb, Jason; Ford, Blair; Jankovic, Joseph; Simpson, Richard; Dashtipour, Khashayar; Phibbs, Fenna; Neimat, Joseph S; Stewart, R Malcolm; Peichel, DeLea; Pahwa, Rajesh; Ostrem, Jill L

2017-07-01

This study of thalamic deep brain stimulation (DBS) investigated whether a novel constant-current device improves tremor and activities of daily living (ADL) in patients with essential tremor (ET). A prospective, controlled, multicenter study was conducted at 12 academic centers. We investigated the safety and efficacy of unilateral and bilateral constant-current DBS of the ventralis intermedius (VIM) nucleus of the thalamus in patients with essential tremor whose tremor was inadequately controlled by medications. The primary outcome measure was a rater-blinded assessment of the change in the target limb tremor score in the stimulation-on versus stimulation-off state six months following surgery. Multiple secondary outcomes were assessed at one-year follow-up, including motor, mood, and quality-of-life measures. 127 patients were implanted with VIM DBS. The blinded, primary outcome variable (n = 76) revealed a mean improvement of 1.25 ± 1.26 points in the target limb tremor rating scale (TRS) score in the arm contralateral to DBS (p < 0.001). Secondary outcome variables at one year revealed significant improvements (p ≤ 0.001) in quality of life, depression symptoms, and ADL scores. Forty-seven patients had a second contralateral VIM-DBS, and this group demonstrated reduction in second-sided tremor at 180 days (p < 0.001). Serious adverse events related to the surgery included infection (n = 3), intracranial hemorrhage (n = 3), and device explantation (n = 3). Unilateral and bilateral constant-current VIM DBS significantly improves upper extremity tremor, ADL, quality of life, and depression in patients with severe ET. Copyright © 2017 Elsevier Ltd. All rights reserved.

Thalamic deep brain stimulation for tremor in Parkinson disease, essential tremor, and dystonia.

PubMed

Cury, Rubens Gisbert; Fraix, Valerie; Castrioto, Anna; Pérez Fernández, Maricely Ambar; Krack, Paul; Chabardes, Stephan; Seigneuret, Eric; Alho, Eduardo Joaquim Lopes; Benabid, Alim-Louis; Moro, Elena

2017-09-26

To report on the long-term outcomes of deep brain stimulation (DBS) of the thalamic ventral intermediate nucleus (VIM) in Parkinson disease (PD), essential tremor (ET), and dystonic tremor. One hundred fifty-nine patients with PD, ET, and dystonia underwent VIM DBS due to refractory tremor at the Grenoble University Hospital. The primary outcome was a change in the tremor scores at 1 year after surgery and at the latest follow-up (21 years). Secondary outcomes included the relationship between tremor score reduction over time and the active contact position. Tremor scores (Unified Parkinson's Disease Rating Scale-III, items 20 and 21; Fahn, Tolosa, Marin Tremor Rating Scale) and the coordinates of the active contacts were recorded. Ninety-eight patients were included. Patients with PD and ET had sustained improvement in tremor with VIM stimulation (mean improvement, 70% and 66% at 1 year; 63% and 48% beyond 10 years, respectively; p < 0.05). There was no significant loss of stimulation benefit over time ( p > 0.05). Patients with dystonia exhibited a moderate response at 1-year follow-up (41% tremor improvement, p = 0.027), which was not sustained after 5 years (30% improvement, p = 0.109). The more dorsal active contacts' coordinates in the right lead were related to a better outcome 1 year after surgery ( p = 0.029). During the whole follow-up, forty-eight patients (49%) experienced minor side effects, whereas 2 (2.0%) had serious events (brain hemorrhage and infection). VIM DBS is an effective long-term (beyond 10 years) treatment for tremor in PD and ET. Effects on dystonic tremor were modest and transient. This provides Class IV evidence. It is an observational study. © 2017 American Academy of Neurology.

High-energy, high-rate materials processing

NASA Astrophysics Data System (ADS)

Marcus, H. L.; Bourell, D. L.; Eliezer, Z.; Persad, C.; Weldon, W.

1987-12-01

The increasingly available range of pulsed-power, high energy kinetic storage devices, such as low-inductance pulse-forming networks, compulsators, and homopolar generators, is presently considered as a basis for industrial high energy/high rate (HEHR) processing to accomplish shock hardening, drilling, rapid surface alloying and melting, welding and cutting, transformation hardening, and cladding and surface melting in metallic materials. Time-temperature-transformation concepts furnish the basis for a fundamental understanding of the potential advantages of this direct pulsed power processing. Attention is given to the HEHR processing of a refractory molybdenum alloy, a nickel-base metallic glass, tungsten, titanium aluminides, and metal-matrix composites.

Evidence of a primordial solar wind. [T Tauri-type evolution model

NASA Technical Reports Server (NTRS)

Sonett, C. P.

1974-01-01

A model is reviewed which requires a T Tauri 'wind' and at the same time encompasses certain early-object stellar features. The theory rests on electromagnetic induction driven by the 'wind'. Plasma confinement of the induced field prohibits a scattered field, and all energy loss is via ohmic heating in the scatterer (i.e., planetary objects). Two modes, one caused by the interplanetary electric field (transverse magnetic) and the other by time variations in the interplanetary magnetic field (transverse electric) are present. Parent body melting, lunar surface melting, and a primordial magnetic field are components of the proposed model.

The measurement of heats of solution of high melting metallic systems in an electromagnetic levitation field. Ph.D. Thesis - Tech. Univ. Berlin - 1979

NASA Technical Reports Server (NTRS)

Frohberg, M. G.; Betz, G.

1982-01-01

A method was tested for measuring the enthalpies of mixing of liquid metallic alloying systems, involving the combination of two samples in the electromagnetic field of an induction coil. The heat of solution is calculated from the pyrometrically measured temperature effect, the heat capacity of the alloy, and the heat content of the added sample. The usefulness of the method was tested experimentally with iron-copper and niobium-silicon systems. This method should be especially applicable to high-melting alloys, for which conventional measurements have failed.

Shock melting and vaporization of metals.

NASA Technical Reports Server (NTRS)

Ahrens, T. J.

1972-01-01

The effect of initial porosity on shock induction of melting and vaporization is investigated for Ba, Sr, Li, Fe, Al, U, and Th. For the less compressible of these metals, it is found that for a given strong shock-generation system (explosive in contact, or flyer-plate impact) an optimum initial specific volume exists such that the total entropy production, and hence the amount of metal liquid or vapor, is a maximum. Initial volumes from 1.4 to 2.0 times crystal volumes, depending on the metal sample and shock-inducing system, will result in optimum post-shock entropies.

Melter Feed Reactions at T ≤ 700°C for Nuclear Waste Vitrification

DOE Office of Scientific and Technical Information (OSTI.GOV)

Xu, Kai; Hrma, Pavel R.; Rice, Jarrett A.

2015-07-23

Batch reactions and phase transitions in a nuclear waste feed heated at 5 K min-1 up to 600°C were investigated by optical microscopy, scanning electron microscopy with energy dispersive X-ray spectrometer, and X-ray diffraction. Quenched samples were leached in deionized water at room temperature and 80°C to extract soluble salts and early glass-forming melt, respectively. To determine the content and composition of leachable phases, the leachates were analyzed by the inductively-coupled plasma spectroscopy. By ~400°C, gibbsite and borax lost water and converted to amorphous and intermediate crystalline phases. Between 400°C and 600°C, the sodium borate early glass-forming melt reacted withmore » amorphous aluminum oxide and calcium oxide to form intermediate products containing Al and Ca. At ~600°C, half Na and B converted to the early glass-forming melt, and quartz began to dissolve in the melt.« less

Calculated criticality for sup 235 U/graphite systems using the VIM Monte Carlo code

DOE Office of Scientific and Technical Information (OSTI.GOV)

Collins, P.J.; Grasseschi, G.L.; Olsen, D.N.

1992-01-01

Calculations for highly enriched uranium and graphite systems gained renewed interest recently for the new production modular high-temperature gas-cooled reactor (MHTGR). Experiments to validate the physics calculations for these systems are being prepared for the Transient Reactor Test Facility (TREAT) reactor at Argonne National Laboratory (ANL-West) and in the Compact Nuclear Power Source facility at Los Alamos National Laboratory. The continuous-energy Monte Carlo code VIM, or equivalently the MCNP code, can utilize fully detailed models of the MHTGR and serve as benchmarks for the approximate multigroup methods necessary in full reactor calculations. Validation of these codes and their associated nuclearmore » data did not exist for highly enriched {sup 235}U/graphite systems. Experimental data, used in development of more approximate methods, dates back to the 1960s. The authors have selected two independent sets of experiments for calculation with the VIM code. The carbon-to-uranium (C/U) ratios encompass the range of 2,000, representative of the new production MHTGR, to the ratio of 10,000 in the fuel of TREAT. Calculations used the ENDF/B-V data.« less

Singular regional brightening events on Titan as seen by Cassini/VIMS

NASA Astrophysics Data System (ADS)

Rodriguez, S.; Le Mouélic, S.; Barnes, J. W.; Rannou, P.; Sotin, C.; Brown, R. H.; Bow, J.; Vixie, G.; Cornet, T.; Bourgeois, O.; Narteau, C.; Courrech Du Pont, S.; Griffith, C. A.; Jaumann, R.; Stephan, K.; Buratti, B. J.; Clark, R. N.; Baines, K. H.; Nicholson, P. D.

2011-10-01

We present here the observation of intense brightening at Titan's tropics, very close to the equinox. These detections were conducted with the Visual and Infrared Mapping Spectrometer [8] (VIMS) onboard Cassini. Figure 1 presents the VIMS color composite images of the three individual events detected so far, observed during the Titan's flybys T56 (22 May 2009), T65 (13 January 2010) and T70 (21 June 2010). T56, T65 and T70 observations show an intense and transient brightening of large regions very close to the equator, which all appear spectrally and morphologically different from all previous observed surface features or atmospheric phenomena. These events share in particular a strong brightening at wavelengths greater than 2 μm (especially at 5 μm), making them spectrally distinct from the few large storms observed near the equator. We will discuss the possibility that these singular events may have occurred very close to the surface, having a very local origin. We will also discuss the possible implication of the equinoctial occurrence of such events for Titan's tropical climatology and their probable link with particular geological features at Titan's surface.

[Metallo-beta-lactamase-mediated resistance among carbapenem-resistant Pseudomonas aeruginosa clinical isolates].

PubMed

Mereuţă, Ana Irina; Tuchiluş, Cristina; Bădescu, Aida Corina; Iancu, Luminiţa Smaranda

2011-01-01

The aim of our study was to evaluate the antimicrobial susceptibility profile and the presence of metallo-beta-lactamases (MBLs) among carbapenem-resistant Pseudomonas aeruginosa clinical isolates. A total of 84 P. aeruginosa clinical isolates collected between January 2007- February 2011 from four university hospitals in Iasi (North-East region of Romania) were randomly selected. Antimicrobial susceptibility testing was performed according to CLSI 2010 (Clinical and Laboratory Standards Institute) guidelines. The isolates were tested for MBLs using EPI (EDTA-phenanthroline-imipenem) phenotypic test and polymerase chain reaction (PCR) for bla(VIM) and bla(IMP). Fifty-eight carbapenem resistant strains were identified, from which 24 (41,3%) were positive for VIM-type MBLs. No IMP - type MBL was detected. All MBL-producing isolates displayed a MDR (multidrug resistant) phenotype, two of them were XDR (extensively drug-resistant). Colistin remained the most effective antibiotic. The high proportion of MBL producing P. aeruginosa clinical isolates urges the need for a better use of antibiotics and for efficient infection control measures to prevent dissemination of MBL producers. This is the first report of VIM-like enzymes in P. aeruginosa isolates from the Iasi area.

Cytokinetic Failure-induced Tetraploidy Develops into Aneuploidy, Triggering Skin Aging in Phosphovimentin-deficient Mice.

PubMed

Tanaka, Hiroki; Goto, Hidemasa; Inoko, Akihito; Makihara, Hiroyuki; Enomoto, Atsushi; Horimoto, Katsuhisa; Matsuyama, Makoto; Kurita, Kenichi; Izawa, Ichiro; Inagaki, Masaki

2015-05-22

Tetraploidy, a state in which cells have doubled chromosomal sets, is observed in ∼20% of solid tumors and is considered to frequently precede aneuploidy in carcinogenesis. Tetraploidy is also detected during terminal differentiation and represents a hallmark of aging. Most tetraploid cultured cells are arrested by p53 stabilization. However, the fate of tetraploid cells in vivo remains largely unknown. Here, we analyze the ability to repair wounds in the skin of phosphovimentin-deficient (VIM(SA/SA)) mice. Early into wound healing, subcutaneous fibroblasts failed to undergo cytokinesis, resulting in binucleate tetraploidy. Accordingly, the mRNA level of p21 (a p53-responsive gene) was elevated in a VIM(SA/SA)-specific manner. Disappearance of tetraploidy coincided with an increase in aneuploidy. Thereafter, senescence-related markers were significantly elevated in VIM(SA/SA) mice. Because our tetraploidy-prone mouse model also exhibited subcutaneous fat loss at the age of 14 months, another premature aging phenotype, our data suggest that following cytokinetic failure, a subset of tetraploid cells enters a new cell cycle and develops into aneuploid cells in vivo, which promote premature aging. © 2015 by The American Society for Biochemistry and Molecular Biology, Inc.

Saturn's depths in a new light: Novel views of meteorology, circulation and dynamics by Cassini/VIMS

NASA Astrophysics Data System (ADS)

Baines, Kevin; Momary, Thomas; Roos-Serote, Maarten; Showman, Adam; Atreya, Sushil K.; Brown, Robert H.; Buratti, Bonnie; Clark, Roger; Nicholson, Phillip

The depths of Saturn below the ubiquitous covering of ammonia hazes have been revealed in detail by the Visual Infrared Mapping Spectrometer (VIMS) onboard the Cassini orbiter. Using Saturn's own indigenous glow produced by warm air at depth to back-light deep clouds, a diverse array of cloud features have been discovered near the 3-bar level, some 75 km underneath the ammonia clouds. Likely comprised of ammonia hydrosulfide, perhaps with a complement of water, the menagerie of deep cloud structures - including dozens of surprisingly narrow axisymmetric "zones", "smoke rings", a long-lived "string of pearls" spanning 1/4 of the planet, large plume-like and cyclonic features, and a deep-seated hexagonal feature circumscribing the north pole - reveal Saturn at depth to be a dynamic, meteorologically active planet much more like frenetic Jupiter than the classically serene face Saturn shows in sunlight. Additional information on Saturn's dynamically active nature is provided by daytime imagery of discrete clouds observed at the southpole - revealing two compositional types of clouds, suggesting a variety of upwelling phenomena - and the latitudinal variability of the trace disequilibrium gases arsine and phosphine observed in VIMS spectra.

Cassini/VIMS observation of an Io post-eclipse brightening event

USGS Publications Warehouse

Bellucci, G.; D'Aversa, E.; Formisano, V.; Cruikshank, D.; Nelson, R.M.; Clark, R.N.; Baines, K.H.; Matson, D.; Brown, R.H.; McCord, T.B.; Buratti, B.J.; Nicholson, P.D.

2004-01-01

During the Cassini-Jupiter flyby, VIMS observed Io at different phase angles, both in full sunlight and in eclipse. By using the sunlight measurements, we were able to produce phase curves in the visual through all the near infrared wavelengths covered by the VIMS instrument (0.85-5.1 ??m). The phase angle spanned from ???2?? to ???120??. The measurements, done just after Io emerged from Jupiter's shadow, show an increase of about 15% in Io's reflectance with respect to what would be predicted by the phase curve. This behavior is observed at wavelengths >1.2 ??m. Moreover, just after emergence from eclipse an increase of about 25% is observed in the depth of SO2 frost bands at 4.07 and 4.35 ??m. At 0.879

Saturn's tropospheric composition and clouds from Cassini/VIMS 4.6-5.1 μm nightside spectroscopy

NASA Astrophysics Data System (ADS)

Fletcher, Leigh N.; Baines, Kevin H.; Momary, Thomas W.; Showman, Adam P.; Irwin, Patrick G. J.; Orton, Glenn S.; Roos-Serote, Maarten; Merlet, C.

2011-08-01

The latitudinal variation of Saturn's tropospheric composition (NH 3, PH 3 and AsH 3) and aerosol properties (cloud altitudes and opacities) are derived from Cassini/VIMS 4.6-5.1 μm thermal emission spectroscopy on the planet's nightside (April 22, 2006). The gaseous and aerosol distributions are used to trace atmospheric circulation and chemistry within and below Saturn's cloud decks (in the 1- to 4-bar region). Extensive testing of VIMS spectral models is used to assess and minimise the effects of degeneracies between retrieved variables and sensitivity to the choice of aerosol properties. Best fits indicate cloud opacity in two regimes: (a) a compact cloud deck centred in the 2.5-2.8 bar region, symmetric between the northern and southern hemispheres, with small-scale opacity variations responsible for numerous narrow light/dark axisymmetric lanes; and (b) a hemispherically asymmetric population of aerosols at pressures less than 1.4 bar (whose exact altitude and vertical structure is not constrained by nightside spectra) which is 1.5-2.0× more opaque in the summer hemisphere than in the north and shows an equatorial maximum between ±10° (planetocentric). Saturn's NH 3 spatial variability shows significant enhancement by vertical advection within ±5° of the equator and in axisymmetric bands at 23-25°S and 42-47°N. The latter is consistent with extratropical upwelling in a dark band on the poleward side of the prograde jet at 41°N (planetocentric). PH 3 dominates the morphology of the VIMS spectrum, and high-altitude PH 3 at p < 1.3 bar has an equatorial maximum and a mid-latitude asymmetry (elevated in the summer hemisphere), whereas deep PH 3 is latitudinally-uniform with off-equatorial maxima near ±10°. The spatial distribution of AsH 3 shows similar off-equatorial maxima at ±7° with a global abundance of 2-3 ppb. VIMS appears to be sensitive to both (i) an upper tropospheric circulation (sensed by NH 3 and upper-tropospheric PH 3 and hazes) and (ii) a lower tropospheric circulation (sensed by deep PH 3, AsH 3 and the lower cloud deck).

The Case for Cryovolcanism on Saturns Moon Titan

NASA Astrophysics Data System (ADS)

Nelson, R. M.

2009-04-01

Two regions on the surface of Saturn's satellite Titan have been observed to change reflectance during the Cassini spacecraft's four-year, orbital tour of the Saturnian system. These changes were documented by Cassini's Visual and Infrared Mapping Spectrometer. Titan's atmosphere is opaque at visual wavelengths due to methane, but VIMS is able to image the surface through "windows" at infrared wavelengths where the methane is relatively transparent[1,2]. Cassini RADAR images show that at least one of these regions, Hotei Arcus (26S,78W), exhibits lobate "flow" forms, consistent with the morphology of volcanic terrain [3]. Here we report the discovery of additional lobate "flow" patterns on Titan's surface at Hotei Arcus, based on VIMS images recently obtained during close flybys by Cassini. This new evidence, combined with the previous evidence from RADAR images, together with the earlier brightness variability seen at these same locations by VIMS, supports the hypothesis of volcanic eruptions. If so, then Titan is presently geologically active on the surface, and in its interior. Cassini encountered Titan at very close range on 2008-11-19-13:58 and again on 2008-12-05-12:38. These epochs are called T47 and T48. The slant distance from the spacecraft to Hotei Arcus was 27,051 and 31,787 km. for T47 and T48 respectively. We report changes that occurred since the T5 flyby (2005-04-16-13:17; range 117042 km). Previously, VIMS was able to see brightness changes but not morphological change. Now, comparison of earlier higher-resolution data (T5) with the recent T47 and T48 data reveal changes of the surface reflectance and morphology in the Hotei region. This is the first evidence from VIMS that shows that Hotei Arcus is morphology consistent with volcanic terrain. If Titan is currently active then these results raise for discussion the following questions: What is the full extent of current geologic activity? What are the ongoing processes? Are Titan's chemical processes today supporting a prebiotic chemistry similar to that under which life evolved on Earth? References: [1]R. M. Nelson et al., 2008a accepted in Icarus [2]R. M. Nelson et al., 2008b accepted in GRL. [3]S. D. Wall et al. 2009 accepted in GRL. This work performed at JPL under contract with NASA.

The Particle Size Distribution in Saturn’s C Ring from UVIS and VIMS Stellar Occultations and RSS Radio Occultations

NASA Astrophysics Data System (ADS)

Jerousek, Richard Gregory; Colwell, Josh; Hedman, Matthew M.; French, Richard G.; Marouf, Essam A.; Esposito, Larry; Nicholson, Philip D.

2017-10-01

The Cassini Ultraviolet Imaging Spectrograph (UVIS) and Visual and Infrared Mapping Spectrometer (VIMS) have measured ring optical depths over a wide range of viewing geometries at effective wavelengths of 0.15 μm and 2.9 μm respectively. Using Voyager S and X band radio occultations and the direct inversion of the forward scattered S band signal, Marouf et al. (1982), (1983), and Zebker et al. (1985) determined the power-law size distribution parameters assuming a minimum particle radius of 1 mm. Many further studies have also constrained aspects of the particle size distribution throughout the main rings. Marouf et al. (2008a) determined the smallest ring particles to have radii of 4-5 mm using Cassini RSS data. Harbison et al. (2013) used VIMS solar occultations and also found minimum particle sizes of 4-5 mm in the C ring with q ~ 3.1, where n(a)da=Ca^(-q)da is the assumed differential power-law size distribution for particles of radius a. Recent studies of excess variance in stellar signal by Colwell et al. (2017, submitted) constrain the cross-section-weighted effective particle radius to 1 m to several meters. Using the wide range of viewing geometries available to VIMS and UVIS stellar occultations we find that normal optical depth does not strongly depend on viewing geometry at 10km resolution (which would be the case if self-gravity wakes were present). Throughout the C ring, we fit power-law derived optical depths to those measured by UVIS, VIMS, and by the Cassini Radio Science Subsystem (RSS) at 0.94 and 3.6 cm wavelengths to constrain the four parameters of the size distribution at 10km radial resolution. We find significant amounts of particle size sorting throughout the region with a positive correlation between maximum particles size (amax) and normal optical depth with a mean value of amax ~ 3 m in the background C ring. This correlation is negative in the C ring plateaus. We find an inverse correlation in minimum particle radius with normal optical depth and a mean value of amin ~ 4 mm in the background C ring with slightly larger smallest particles in the C ring plateaus.

A new description of Titan's aerosol optical properties from the analysis of VIMS Emission Phase Function observations

NASA Astrophysics Data System (ADS)

Maltagliati, Luca; Rodriguez, Sebastien; Sotin, Christophe; Rannou, Pascal; Bezard, Bruno; Cornet, Thomas

2016-06-01

The Huygens probe gave unprecedented information on the properties of Titan's aerosols (vertical distribution, opacity as a function of wavelength, phase function, single scattering albedo) by in-situ measurements (Tomasko et al. 2008). Being the only existing in-situ atmospheric probing for Titan, this aerosol model currently is the reference for many Titan studies (e.g. by being applied as physical input in radiative transfer models of the atmosphere). Recently a reanalysis of the DISR dataset, corroborated by data from the Downward-Looking Visible Spectrometer (DLVS), was carried out by the same group (Doose et al. 2016), leading to significant changes to the indications given by Tomasko et al. (2008). Here we present the analysis of the Emission Phase Function observation (EPF) performed by VIMS during the Cassini flyby T88 (November 2012). An EPF observes the same spot on the surface (and thus the same atmosphere) with the same emergence angle but with different incidence angles. In this way, our EPF allows, for the first time, to have direct information on the phase function of Titan's aerosols, as well as on other important physical parameters of the aerosols as the behavior of their extinction as a function of wavelength and the single scattering albedo (also as a function of wavelength) for the whole VIMS range (0.8-5.2 µm). The T88 EPF is composed of 25 VIMS datacubes spanning a scattering angle range approximately from 0°to 70°. We used the radiative transfer model described in Hirtzig et al. (2013) as baseline, updated with improved methane (+ related isotopes) spectroscopy. By changing the aerosol description in the model, we found the combination of aerosol optical parameters that fits best a constant aerosol column density over the whole set of the VIMS datacubes. We confirmed that the new results from Doose et al. (2016) do improve the fit for what concerns the vertical profile and the extinction as a function of wavelength. However, a different phase function with respect to what they propose must be employed, especially in the trend towards the backscattering peak. We also find that darker aerosols are needed in order to reproduce the value of the column opacity measured in-situ by Huygens.

A new description of Titan's aerosol optical properties from the analysis of VIMS Emission Phase Function observations

NASA Astrophysics Data System (ADS)

Rodriguez, Sebastien; Maltagliati, Luca; Sotin, Christophe; Rannou, Pascal; Bézard, Bruno; Cornet, Thomas

2016-10-01

The Huygens probe gave unprecedented information on the properties of Titan's aerosols (vertical distribution, opacity as a function of wavelength, phase function, single scattering albedo) by in-situ measurements (Tomasko et al. 2008). Being the only existing in-situ atmospheric probing for Titan, this aerosol model currently is the reference for many Titan studies (e.g. by being applied as physical input in radiative transfer models of the atmosphere). Recently a reanalysis of the DISR dataset, corroborated by data from the Downward-Looking Visible Spectrometer (DLVS), was carried out by the same group (Doose et al. 2016), leading to significant changes to the indications given by Tomasko et al. (2008).Here we present the analysis of the Emission Phase Function observation (EPF) performed by VIMS during the Cassini flyby T88 (November 2012). An EPF observes the same spot on the surface (and thus the same atmosphere) with the same emergence angle but with different incidence angles. In this way, our EPF allows, for the first time, to have direct information on the phase function of Titan's aerosols, as well as on other important physical parameters of the aerosols as the behavior of their extinction as a function of wavelength and the single scattering albedo (also as a function of wavelength) for the whole VIMS range (0.8-5.2 μm). The T88 EPF is composed of 25 VIMS datacubes spanning a scattering angle range approximately from 0°to 70°.We used the radiative transfer model described in Hirtzig et al. (2013) as baseline, updated with improved methane (+ related isotopes) spectroscopy. By changing the aerosol description in the model, we found the combination of aerosol optical parameters that fits best a constant aerosol column density over the whole set of the VIMS datacubes. We confirmed that the new results from Doose et al. (2016) do improve the fit for what concerns the vertical profile and the extinction as a function of wavelength. However, a different phase function with respect to what they propose must be employed, especially in the trend towards the backscattering peak. We also find that darker aerosols are needed in order to reproduce the value of the column opacity measured in-situ by Huygens.

Analogous detection of circulating tumor cells using the AccuCyte® -CyteFinder® system and ISET system in patients with locally advanced and metastatic prostate cancer.

PubMed

van der Toom, Emma E; Groot, Vincent P; Glavaris, Stephanie A; Gemenetzis, Georgios; Chalfin, Heather J; Wood, Laura D; Wolfgang, Christopher L; de la Rosette, Jean J M C H; de Reijke, Theo M; Pienta, Kenneth J

2018-03-01

Circulating tumor cells (CTCs) can provide important information on patient's prognosis and treatment efficacy. Currently, a plethora of methods is available for the detection of these rare cells. We compared the outcomes of two of those methods to enumerate and characterize CTCs in patients with locally advanced and metastatic prostate cancer (PCa). First, the selection-free AccuCyte ® - CyteFinder ® system (RareCyte ® , Inc., Seattle, WA) and second, the ISET system (Rarecells Diagnostics, France), a CTC detection method based on cell size-exclusion. Peripheral blood samples were obtained from 15 patients with metastatic PCa and processed in parallel, using both methods according to manufacturer's protocol. CTCs were identified by immunofluorescence, using commercially available antibodies to pancytokeratin (PanCK), EpCAM, CD45/CD66b/CD34/CD11b/CD14 (AccuCyte ® - CyteFinder ® system), and pancytokeratin, vimentin (Vim) and CD45 (ISET system). The median CTC count was 5 CTCs/7.5 mL (range, 0-20) for the AccuCyte ® - CyteFinder ® system and 37 CTCs/7.5 mL (range, 8-139) for the ISET system (P < 0.001). Total CTC counts obtained for the two methods were correlated (r = 0.750, P = 0.001). When separating the total CTC count obtained with the ISET system in PanCK+/Vim- and PanCK+/Vim+ CTCs, the total CTC count obtained with the AccuCyte ® - CyteFinder ® system was moderately correlated with the PanCK+/Vim- CTCs, and strongly correlated with the PanCK+/Vim+ CTCs (r = 0.700, P = 0.004 and r = 0.810, P < 0.001, respectively). Our results highlight significant disparities in the enumeration and phenotype of CTCs detected by both techniques. Although the median amount of CTCs/7.5 mL differed significantly, total CTC counts of both methods were strongly correlated. For future studies, a more uniform approach to the isolation and definition of CTCs based on immunofluorescent stains is needed to provide reproducible results that can be correlated with clinical outcomes. © 2017 Wiley Periodicals, Inc.

High-Resolution Enceladus Atlas and Compositional Maps derived from Cassini ISS and VIMS

NASA Astrophysics Data System (ADS)

Roatsch, Thomas; Kersten, Elke; Wählisch, Marita; Hoffmeister, Angelika; Stephan, Katrin; Jaumann, Ralf

2010-05-01

The first version of the high-resolution Enceladus atlas was released in 2006 [1]. The Cassini Imaging Science Sub-system (ISS) acquired more high-resolution images (< 1 km/pixel) during five close flybys of Enceladus in 2008 and 2009. We combined these images with lower-resolution coverage taken between 2007 and 2009 to improve the high-resolution global mosaic of Enceladus. The whole mosaic was shifted by 3.5° to the West to be consistent with the IAU definition of the prime meridian location. This new global mosaic is the baseline for the second release of the high-resolution Enceladus atlas that consists again of 15 tiles mapped at a scale of 1:500,000. We proposed 29 additional names for features which will be used as nomenclature in the atlas. We are awaiting validation of the new nomenclature by the IAU. The new release of the atlas will be made available to the public through CICLOPS (http://ciclops.org) and PDS (http://pds.jpl.nasa.gov). The Cassini Visual and Infrared Imaging Spectrometer (VIMS) observed Enceladus during a couple of flybys between 2005 and 2009. This gave us the possibility to combine these data into a global VIMS mosaic. Based on this mosaic maps of Enceladus' spectral properties could be derived. Thus, global maps illustrating the spatial variations of the absorption band depth of water ice were calculated, which are indicative of varying sizes of the water ice particles [2]. The authors gratefully acknowledge the planning and operation work of their colleagues from the Cassini-ISS team lead by Carolyn Porco and from the Cassini-VIMS team lead by Robert Brown. [1] Roatsch, Th. et al., High-resolution Enceladus atlas derived from Cassini-ISS images. Planetary Space Sciences 56, 109-116, 2008. [2] Jaumann, R., Stephan, K., Hansen, G.B., Clark, R.N., Buratti, B.J., Brown, R.H., Baines, K.H., Newman, S.F., Bellucci, G., Filacchione, G., Coradini, A., Cruikshank, D.P., Griffith, C.A., Hibbitts, C.A., McCord, T.B., Nelson, R.M., Nicholson, P.D., Sotin, C., and Wagner, R., 2008: Distribution of icy particles across Enceladus' surface as derived from Cassini-VIMS measurements. Icarus 193.

Enceladus' Geysers and Small-scale Thermal Hot Spots: Spatial Correlations and Implications

NASA Astrophysics Data System (ADS)

Porco, C.; Helfenstein, P.; Goguen, J.

2016-12-01

The geysering south polar terrain (SPT) of Enceladus has been a major focus of the Cassini mission ever since Cassini's first sighting of it in images taken in early 2005 (1). A high resolution imaging survey of the region conducted over the course of seven years resulted in the identification of 100 geysers erupting from the four main fractures crossing the SPT (2). The Cassini Visual and Infrared Mapping Spectrometer (VIMS) detected enhanced thermal emission arising from these fractures and taking the form of small-scale ( ≤ 10 meter) discrete spots (3,4). Four of these hot spot observations have already been spatially associated with four geysers on the Baghdad Sulcus fracture (2). The inferred spatial correlation and small size of each hot spot eliminated shear heating along the near-surface walls of the fractures as the source of the heat and erupting materials. Instead, it was concluded that condensation of vapor (and liquid), and the deposition of latent heat, on the near-surface vent walls, and the subsequent conduction of that heat to the surface, was the source of the observed thermal emission. This indicated that the hot spots are the secondary signature of a geyser eruption process deeply rooted in the moon's sub-surface liquid water reservoir (2). We extend the examination of these relationships to include seven additional VIMS observations of hot spots. At the present time, we have associated a total of 11 VIMS hot spot observations with 13 (maybe 14) geysers distributed over all four tiger stripe fractures. It's not uncommon for the locations of multiple (often two but sometimes three) surveyed geysers to overlap within estimated uncertainties. This can occur when they have different 3D orientations, making them identifiable in our 2014 survey as distinct features; However, the raw, thermally unmodeled VIMS maps, with their (relatively) coarse resolution, may register at that location only one corresponding hot spot. It is also possible that closely overlapping clusters of geysers in the survey represent a single geyser that changes its direction over the course of an Enceladus orbit as its vent widens and narrows with the diurnally varying normal stresses. Nonetheless, future thermal modeling of these VIMS hot spots should help constrain the conditions in the near-surface vents from which the geysers erupt.

Reactive stroma in the prostate during late life: The role of microvasculature and antiangiogenic therapy influences.

PubMed

Montico, Fabio; Kido, Larissa Akemi; San Martin, Rebeca; Rowley, David R; Cagnon, Valéria H A

2015-10-01

Prostate cancer is associated to a reactive stroma microenvironment characterized by angiogenic processes that are favorable for tumor progression. Senescence has been identified as a predisposing factor for prostate malignancies. In turn, the relationships between aging, reactive stroma, and the mechanisms that induce this phenotype are largely unknown. Thus, we investigated the occurrence of reactive stroma in the mouse prostate during advanced age as well as the effects of antiangiogenic and androgen ablation therapies on reactive stroma recruitment. Male mice (52-week-old FVB) were treated with two classes of angiogenesis inhibitors: direct (TNP-470; 15 mg/kg; s.c.) and/or indirect (SU5416; 6 mg/kg; i.p.). Androgen ablation was carried out by finasteride administration (20 mg/kg; s.c.), alone or in association to both inhibitors. The Transgenic Adenocarcinoma of the Mouse Prostate (TRAMP) model was used as a paradigm of cancer-associated reactive stroma. The dorsolateral prostate was collected for α-actin (αSMA), vimentin (VIM), and transforming growth factor-beta (TGF-β) immunohistochemical and Western blotting analyses as well as for CD34/αSMA and CD34/VIM colocalization. Senescence was associated with increased αSMA, VIM, and TGF-β expression as well as with the recruitment of CD34/αSMA and CD34/VIM dual-positive fibroblasts. These observations were similar to those verified in TRAMP mice. Antiangiogenic treatment promoted the recovery of senescence-associated stromal changes. Hormonal ablation, despite having led to impaired CD34/αSMA and CD34/VIM dual-positive cell recruitment, did not result in decreased stimulus to reactive stroma development, due to enhanced TGF-β expression in relation to the aged controls. Reactive stroma develops in the prostate of non-transgenic mice as a result of aging. The periacinar microvasculature is a candidate source for the recruitment of reactive stroma-associated cells, which may be derived either from perivascular-resident mesenchymal stem cells (MSCs) or from an endothelial-to-mesenchymal transition (EndMT) process. Thus, antiangiogenic therapy is a promising approach for preventing age-associated prostate malignancies by means of its negative interference in the development of reactive stroma phenotype from the vascular wall. © 2015 Wiley Periodicals, Inc.

Induction heating of planetary interiors

NASA Astrophysics Data System (ADS)

Kislyakova, K.; Noack, L.; Johnstone, C. P.; Zaitsev, V. V.; Fossati, L.; Lammer, H.; Khodachenko, M. L.; Odert, P.; Güdel, M.

2017-09-01

We present a calculation of the energy release in planetary interiors caused by induction heating. If an exoplanet orbits a host star with a strong magnetic field, it will be embedded in periodically varying magnetic environment. In our work, we consider only a dipole field of the host star and assume the dipole axis to be inclined with respect to the stellar rotational axis, which causes the magnetic field to vary. In this case, the varying magnetic field surrounding the planet will generate induction currents inside the planetary mantle, which will dissipate in the planetary interiors. We show that this energy release can be very substantial and in some cases even lead to complete melting of the planetary mantle over geological timescales, accompanied by the enhanced magnetic activity.

The influence of melt composition on the partitioning of REEs, Y, Sc, Zr and Al between forsterite and melt in the system CMAS

NASA Astrophysics Data System (ADS)

Evans, Thomas M.; O'Neill, Hugh St. C.; Tuff, James

2008-12-01

Partition coefficients for a range of Rare Earth Elements (REEs), Y, Sc, Al and Zr were determined between forsteritic olivine (nearly end-member Mg 2SiO 4) and ten melt compositions in the system CaO-MgO-Al 2O 3-SiO 2 (CMAS) at 1 bar and 1400 °C, with concentrations of the trace elements in the olivine and the melt measured by laser-ablation inductively coupled plasma mass spectrometry (LA-ICP-MS). The REEs and Sc were added at levels sufficient to ensure that concentrations in the olivine were well above the detection limits. The REE partition coefficients (DREEol/melt) decrease with increasing silica in the melt, indicating strong bonding between REEO 1.5 and SiO 2 in the melt. The variation of DREEol/melt as a function of ionic radius is well described by the Brice equation for each composition, although a small proportion of this variation is due to the increase in the strength of the REEO 1.5-SiO 2 interactions in the melt with ionic radius. Scandium behaves very similarly to the REEs, but a global fit of the data from all ten melt compositions suggests that DScol/melt deviates somewhat from the parabolas established by the REE and Y, implying that Sc may substitute into olivine differently to that of the REEs. In contrast to the behaviour of the large trivalent cations, the concentration of Al in olivine is proportional to the square root of its concentration in the melt, indicating a coupled substitution in olivine with a high degree of short-range order. The lack of any correlation of REE partition coefficients with Al in olivine or melt suggests that the REE substitution in olivine is charge-balanced by cation vacancies. The partition coefficient of the tetravalent trace element Zr, which is highly incompatible in olivine, depends on the CaO content of the melt.

High-Temperature Wettability and Interactions between Y-Containing Ni-Based Alloys and Various Oxide Ceramics.

PubMed

Li, Jinpeng; Zhang, Huarui; Gao, Ming; Li, Qingling; Bian, Weidong; Tao, Tongxiang; Zhang, Hu

2018-05-07

To obtain appropriate crucible materials for vacuum induction melting of MCrAlY alloys, four different oxide ceramics, including MgO, Y₂O₃, Al₂O₃, and ZrO₂, with various microstructures were designed and characterized. The high-temperature wettability and interactions between Ni-20Co-20Cr-10Al-1.5Y alloys and oxide ceramics were studied by sessile drop experiments under vacuum. The results showed that all the systems exhibited non-wetting behavior. The contact angles were stable during the melting process of alloys and the equilibrium contact angles were 140° (MgO), 148° (Y₂O₃), 154° (Al₂O₃), and 157° (ZrO₂), respectively. The interfacial reaction between the ceramic substrates and alloys occurred at high temperature. Though the ceramics had different microstructures, similar continuous Y₂O₃ reaction layer with thicknesses of about 25 μm at the alloy-ceramic interface in MgO, Al₂O₃, and ZrO₂ systems formed. The average area percentage of oxides in the alloy matrices were 0.59% (MgO), 0.11% (Al₂O₃), 0.09% (ZrO₂), and 0.02% (Y₂O₃), respectively. The alloys, after reacting with MgO ceramic, had the highest inclusion content, while those with the lowest content were in the Y₂O₃ system. Y₂O₃ ceramic was the most beneficial for vacuum induction melting of high-purity Y-containing Ni-based alloys.

Cold crucible induction melter test for crystalline ceramic waste form fabrication: A feasibility assessment

DOE PAGES

Amoroso, Jake W.; Marra, James; Dandeneau, Christopher S.; ...

2017-01-18

The first scaled proof-of-principle cold crucible induction melter (CCIM) test to process a multiphase ceramic waste form from a simulated combined (Cs/Sr, lanthanide and transition metal fission products) commercial used nuclear fuel waste stream was recently conducted in the United States. X-ray diffraction, 2-D X-ray absorption near edge structure (XANES), electron microscopy, inductively coupled plasma-atomic emission spectroscopy (and inductively coupled plasma-mass spectroscopy for Cs), and product consistency tests were used to characterize the fabricated CCIM material. Characterization analyses confirmed that a crystalline ceramic with a desirable phase assemblage was produced from a melt using a CCIM. We identified primary hollandite,more » pyrochlore/zirconolite, and perovskite phases in addition to minor phases rich in Fe, Al, or Cs. The material produced in the CCIM was chemically homogeneous and displayed a uniform phase assemblage with acceptable aqueous chemical durability.« less

Titan's lakes and Mare observed by the Visual and Infrared Mapping Spectrometer

NASA Astrophysics Data System (ADS)

Brown, R. H.; Soderblom, L. A.; Sotin, C.; Barnes, J. W.; Hayes, A. G.; Lawrence, K. J.; Le Mouelic, S.; Rodriguez, S.; Soderblom, J. M.; Baines, K. H.; Buratti, B. J.; Clark, R. N.; Jaumann, R.; Nicholson, P. D.; Stephan, K.

2012-04-01

Titan is the only place, besides Earth, that holds stable liquid bodies at its surface. The large Kraken Mare, first seen by ISS [1], was then observed by the radar instrument that discovered a large number of small lakes as well as two other Mare [2]. The liquid nature of these radar-dark features was later confirmed by the specular reflection observed by the Visual and Infrared Mapping Spectrometer (VIMS) over Kraken Mare [3] and by the very low albedo at 5-micron over Ontario Lacus [4]. The three largest lakes are called Mare and are all located in the North Pole area. It is remarkable that most of these lakes have been observed on the North Pole with only one large lake, Ontario lacus, located in the South Pole area. This observation suggests the influence of orbital parameters on the meteorology and the occurrence of rainfalls to refill the depressions [5]. Ethane was detected by the VIMS instrument as one component of Ontario lacus [4]. These lakes and Mare play a key role in Titan's meteorology as demonstrated by recent global circulation models [6]. Determining the composition and the evolution of those lakes has become a primary science objective of the Cassini extended mission. Since Titan entered northern spring in August 2009, the North Pole has been illuminated allowing observations at optical wavelengths. On June 5, 2010 the Visual and Infrared Mapping Spectrometer (VIMS) onboard the Cassini spacecraft observed the northern pole area with a pixel size from 3 to 7 km. These observations demonstrate that little of the solar flux at 5-micron is scattered by the atmosphere, which allowed us to build a mosaic covering an area of more than 500,000 km2 that overlaps and complements observations made by the Synthetic Aperture Radar (SAR) in 2007. We find that there is an excellent correlation between the shape of the radar dark area, known as Ligeia Mare and the VIMS 5-micron dark unit. Matching most of the radar shoreline, the 2010 VIMS observations suggest that the 125,000-km2 surface area of Ligeia Mare measured by RADAR in 2007 has not significantly changed [7]. The analysis of the 2-micron spectral window confirms the presence of ethane [8]. Because its saturation vapor pressure is several orders of magnitude smaller than that of methane, liquid ethane is expected to be very stable at Titan's surface conditions, which could explain the stability of the shorelines if ethane is the major compound of the lakes. VIMS observations of Ontario Lacus are planned in 2012 before it disappears in the polar night. Several observations of the northern lakes are planned in 2012 as well as observations of the Mare later in the mission. This work has been performed at the Jet Propulsion Laboratory, California Institute of Technology, under contract to NASA. Government sponsorship acknowledged.

Internal zone growth method for producing metal oxide metal eutectic composites

DOEpatents

Clark, Grady W.; Holder, John D.; Pasto, Arvid E.

1980-01-01

An improved method for preparing a cermet comprises preparing a compact having about 85 to 95 percent theoretical density from a mixture of metal and metal oxide powders from a system containing a eutectic composition, and inductively heating the compact in a radiofrequency field to cause the formation of an internal molten zone. The metal oxide particles in the powder mixture are effectively sized relative to the metal particles to permit direct inductive heating of the compact by radiofrequency from room temperature. Surface melting is prevented by external cooling or by effectively sizing the particles in the powder mixture.

Hypoeutectic melting in the UO2-x-Gd2O3 system

NASA Astrophysics Data System (ADS)

Journeau, Christophe; Fouquart, Pascal; Domenger, Renaud; Allegri, Patrick

2017-05-01

Gadolinium is one of the best neutron absorber materials and its use can be considered as a sacrificial material in a Sodium Fast Reactor core catcher in view of preventing recriticallity. A series of experiments have been conducted in the VITI induction-heated facility to study the melting in the UO2-x-Gd2O3 system with 60-87 mol% gadolinia. These experiments have indicated that the eutectic composition is around 92 mol% Gd2O3 - 8 mol% UO2-x and that the liquidus line is close to that of Popov et al. [Atom. Energ. 110 (2011) pp. 221-229] phase diagram.

Processing, Microstructure, and Tensile Properties of the Ti-6Al-4V-1.55B Eutectic Alloy (Preprint)

DTIC Science & Technology

2007-02-01

compositions via induction skull melting using a water-cooled segmented copper crucible . The charge was incrementally added to give chemical homogeneity...achieved near the water-cooled wall of the segmented copper crucible . The regular eutectic arrangement was destroyed and an irregular distribution of fine

11. VIEW OF DEPLETED URANIUM INGOT. THE METALS WERE PLACED ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

11. VIEW OF DEPLETED URANIUM INGOT. THE METALS WERE PLACED IN CRUCIBLES, LOADED INTO ONE OF EIGHT INDUCTION FURNACES AND MELTED IN A VACUUM ATMOSPHERE. (11/11/57) - Rocky Flats Plant, Non-Nuclear Production Facility, South of Cottonwood Avenue, west of Seventh Avenue & east of Building 460, Golden, Jefferson County, CO

Free suspension processing of oxides to form amorphous oxide materials, appendix B

NASA Technical Reports Server (NTRS)

Wouch, G.

1973-01-01

The processing of yttria, zirconia, and alumina under weightless conditions is discussed. The process consists of levitation or position control, heating and melting, superheating, and supercooling. The use of arc imaging furnaces, lasers, induction heating, microwave, and electron beam methods are analyzed to show the advantages and disadvantages of each.

Electromagnetic heating of minor planets in the early solar system

NASA Technical Reports Server (NTRS)

Herbert, F.; Sonett, C. P.

1979-01-01

Electromagnetic processes occurring in the primordial solar system are likely to have significantly affected planetary evolution. In particular, electrical coupling of the kinetic energy of a dense T-Tauri-like solar wind into the interior of the smaller planets could have been a major driver of thermal metamorphism. Accordingly a grid of asteroid models of various sizes and solar distances was constructed using dc transverse magnetic induction theory. Plausible parameterizations with no requirement for a high environmental temperature led to complete melting for Vesta with no melting for Pallas and Ceres. High temperatures were reached in the Pallas model, perhaps implying nonmelting thermal metamorphosis as a cause of its anomalous spectrum. A reversal of this temperature sequence seems implausible, suggesting that the Ceres-Pallas-Vesta dichotomy is a natural outcome of the induction mechanism. Highly localized heating is expected to arise due to an instability in the temperature-controlled current distribution. Localized metamorphosis resulting from this effect may be relevant to the production and evolution of pallasites, the large presumed metal component of S object spectra, and the formation of the lunar magma ocean.

Formation of the lunar crust - An electrical source of heating

NASA Technical Reports Server (NTRS)

Sonett, C. P.; Colburn, D. S.; Schwartz, K.

1975-01-01

A model for formation of the lunar crust based on heating by electrical induction is explored, while adherence is maintained to certain constraints associated with existing models of the solar system. The heating mechanism is based on eddy current induction from disordered magnetic fields swept outwards by an intense (T Tauri-like) plasma flow from the sun. The electrical theory is an alternative to intense short-period accretion as a source of heat for the evolution of lunar maria and highlands, provided that long-lived radioactives are not swept to the surface from too large a melt volume during the initial thermal episode. This formation of the lunar highlands does not intrinsically require rapid accretion, nor on this basis is the time of formation of the planets generally restricted to a very short time. The threshold temperature for eddy current heating is attained by either a solar nebula at 300-400 C during formation of the moon or a very low energy long-period accumulation of the moon, both leading to melting in ten to the fifth to ten to the seventh power years.

Model 'zero-age' lunar thermal profiles resulting from electrical induction

NASA Technical Reports Server (NTRS)

Herbert, F.; Sonett, C. P.; Wiskerchen, M. J.

1977-01-01

Thermal profiles for the moon are calculated under the assumption that a pre-main-sequence T-Tauri-like solar wind excites both transverse magnetic and transverse electric induction while the moon is accreting. A substantial initial temperature rise occurs, possibly of sufficient magnitude to cause subsequent early extensive melting throughout the moon in conjunction with nominal long-lived radioactives. In these models, accretion is an unimportant direct source of thermal energy but is important because even small temperature rises from accretion cause significant changes in bulk electrical conductivity. Induction depends upon the radius of the moon, which we take to be accumulating while it is being heated electrically. The 'zero-age' profiles calculated in this paper are proposed as initial conditions for long-term thermal evolution of the moon.

[Prevalence of cytotoxicity effectors in nosocomial Pseudomonas Aeruginosa strains].

PubMed

Kuznetsova, M V; Maksimova, A V; Karpunina, T I; Demakov, V A

2014-01-01

Analysis of occurrence of the third type secretory system (TTSS) effectors in clinical P. aeruginosa strains. Intra-hospital (n = 164) and extra-hospital (n = 30) strains of P. aeruginosa were studied. Detection of exoS and exoU genes was carried out by PCR in DNA Engine Dyad Thermal Cycler ("Bio-Rad", USA). Metallo-beta-lactamase (MBL) producers were detected by the presence of blaVIM-2 gene. Screening of intra- and extra-hospital strains for the presence of genes coding ExoS and ExoU showed, that exoS is detected in genome of clinical isolates in 59.8% and exoU--31.1% of cases. At the same time, strains with exoS-/exoU+ genotype predominated in lCU (Φ = 0.466; p = 0.0000). A significant association between the presence of the respective effectors and material of strain isolation was not detected. exoU gene was more frequently detected in genome of MBL producers (Φ = 0.784; p = 0.0004). A significant association between exoU and blaVIM-2 could be explained by clonal prevalence of P. aeruginosa ST235 VIM-2, circulation of those is noted on all the territory of Russia. As a rule, ExoU is produced by highly virulent poly-antibiotic resistant hospital isolates that determine unfavorable outcomes of pseudomonas infection.

Dione's spectral and geological properties

USGS Publications Warehouse

Stephan, K.; Jaumann, R.; Wagner, R.; Clark, R.N.; Cruikshank, D.P.; Hibbitts, C.A.; Roatsch, T.; Hoffmann, H.; Brown, R.H.; Filiacchione, G.; Buratti, B.J.; Hansen, G.B.; McCord, T.B.; Nicholson, P.D.; Baines, K.H.

2010-01-01

We present a detailed analysis of the variations in spectral properties across the surface of Saturn's satellite Dione using Cassini/VIMS data and their relationships to geological and/or morphological characteristics as seen in the Cassini/ISS images. This analysis focuses on a local region on Dione's anti-saturnian hemisphere that was observed by VIMS with high spatial resolution during orbit 16 in October 2005. The results are incorporated into a global context provided by VIMS data acquired within Cassini's first 50 orbits. Our results show that Dione's surface is dominated by at least one global process. Bombardment by magnetospheric particles is consistent with the concentration of dark material and enhanced CO2 absorption on the trailing hemisphere of Dione independent of the geology. Local regions within this terrain indicate a special kind of resurfacing that probably is related to large-scale impact process. In contrast, the enhanced ice signature on the leading side is associated with the extended ejecta of the fresh impact crater Creusa (???49??N/76??W). Although no geologically active regions could be identified, Dione's tectonized regions observed with high spatial resolution partly show some clean H2O ice implying that tectonic processes could have continued into more recent times. ?? 2009 Elsevier Inc. All rights reserved.

Organic Molecules On the Surfaces of Iapetus and Phoebe

NASA Technical Reports Server (NTRS)

Pendleton, Yvonne J.; Dalle Ore, Cristina M.; Clark, Roger N.; Cruikshank, Dale P.

2017-01-01

Absorption bands of both aliphatic and aromatic organic molecules are found in the reflectance spectra of Saturn satellites Iapetus, Phoebe, and Hyperion obtained with the Cassini Visible-Infrared Mapping Spectrometer (VIMS). The VIMS data do not fully resolve the individual bands of C-H functional groups specific to particular molecules, but instead show absorption envelopes representing blended clusters of the bands of aromatic (approximately 3.28 microns) and aliphatic (approximately 3.4 microns) hydrocarbons known in spectra of interstellar dust. In Cruikshank et al. (2014), we matched components of the unresolved hydrocarbon band envelopes with clusters of bands of a range of functional groups in specific types of organic compounds (e.g., normal and N-substituted polycyclic aromatic hydrocarbons, olefins, cycloalkanes, and molecules with lone-pair interactions of N and O with CH3+). In the work reported here, we revisit the spectra of Iapetus and Phoebe using VIMS data processed with improved radiometric and wavelength calibration (denoted RC19). The band envelopes of both aromatic and aliphatic hydrocarbons are now more clearly defined, corroborating the provisional assignment of specific classes of molecules in Cruikshank et al. 2014, but permitting a more reliable quantitative assessment of the relative contributions of those classes, and a revision to the earlier estimate of the ratio of the abundances of aromatic to aliphatic molecules.

The Extra Flask

NASA Astrophysics Data System (ADS)

Thielemann, R.

1981-05-01

It seemed quite natural and logical for me to want to address such an informed group about some of the many superalloys developed over the past forty years-but then I realized that most, if not all of them are listed with their compositions and properties in the ASM Metals Handbook, so this subject did not seem promising. At this point I started to think about the many new and important developments in processing techniques that made the melting, casting, and forming of the alloys possible. It seemed to me that the new procedures were, in most every instance, just as important as the new compositions themselves. Without the new techniques, many of the higher strength compositions were difficult, if not impossible to produce by existing procedures. Certainly, vacuum induction melting allowed us to melt and cast the titanium-and aluminum-bearing compositions without incurring the usual oxide and nitride inclusions.

Study on influence of growth conditions on position and shape of crystal/melt interface of alkali lead halide crystals at Bridgman growth

NASA Astrophysics Data System (ADS)

Král, Robert

2012-12-01

Suitable conditions for growth of high quality single crystals of ternary alkali lead halides prepared by a Bridgman method were explored using direct observation of a crystal/melt interface when pulling an ampoule out of a furnace, deliberated striations' induction and measurement of a temperature field in the filled ampoule in the vertical Bridgman arrangement, as model compounds lead chloride and ternary rubidium lead bromide were used. By direct observation only position of the crystal/melt interface was markedly determined, while by induced striations both the position and the shape of the interface were visualized but their contrast had to be intensified by adding admixtures. Performed temperature measurements in the filled ampoule brought both a view of temperature field in the 3D radial symmetry and basic data for comparison of a real temperature field with those obtained by projected modeling.

X-ray fluorescence analysis of K, Al and trace elements in chloroaluminate melts

NASA Astrophysics Data System (ADS)

Shibitko, A. O.; Abramov, A. V.; Denisov, E. I.; Lisienko, D. G.; Rebrin, O. I.; Bunkov, G. M.; Rychkov, V. N.

2017-09-01

Energy dispersive x-ray fluorescence spectrometry was applied to quantitative determination of K, Al, Cr, Fe and Ni in chloroaluminate melts. To implement the external standard calibration method, an unconventional way of samples preparation was suggested. A mixture of metal chlorides was melted in a quartz cell at 350-450 °C under a slightly excessive pressure of purified argon (99.999 %). The composition of the calibration samples (CSs) prepared was controlled by means of the inductively coupled plasma atomic emission spectrometry (ICP-AES). The optimal conditions for analytical lines excitation were determined, the analytes calibration curves were obtained. There was some influence of matrix effects in synthesized samples on the analytical signal of some elements. The CSs are to be stored in inert gas atmosphere. The precision, accuracy, and reproducibility factors of the quantitative chemical analysis were computed.

A RT-based Technique for the Analysis and the Removal of Titan's Atmosphere by Cassini/VIMS-IR data

NASA Astrophysics Data System (ADS)

Sindoni, G.; Tosi, F.; Adriani, A.; Moriconi, M. L.; D'Aversa, E.; Grassi, D.; Oliva, F.; Dinelli, B. M.; Castelli, E.

2015-12-01

Since 2004, the Visual and Infrared Mapping Spectrometer (VIMS), together with the CIRS and UVIS spectrometers, aboard the Cassini spacecraft has provided insight on Saturn and Titan atmospheres through remote sensing observations. The presence of clouds and aerosols in Titan's dense atmosphere makes the analysis of the surface radiation a difficult task. For this purpose, an atmospheric radiative transfer (RT) model is required. The implementation of a RT code, which includes multiple scattering, in an inversion algorithm based on the Bayesian approach, can provide strong constraints about both the surface albedo and the atmospheric composition. The application of this retrieval procedure we have developed to VIMS-IR spectra acquired in nadir or slant geometries allows us to retrieve the equivalent opacity of Titan's atmosphere in terms of variable aerosols and gaseous content. Thus, the separation of the atmospheric and surface contributions in the observed spectrum is possible. The atmospheric removal procedure was tested on the spectral range 1-2.2μm of publicly available VIMS data covering the Ontario Lacus and Ligeia Mare regions. The retrieval of the accurate composition of Titan's atmosphere is a much more complex task. So far, the information about the vertical structure of the atmosphere by limb spectra was mostly derived under conditions where the scattering could be neglected [1,2]. Indeed, since the very high aerosol load in the middle-low atmosphere produces strong scattering effects on the measured spectra, the analysis requires a RT modeling taking into account multiple scattering in a spherical-shell geometry. Therefore the use of an innovative method we are developing based on the Monte-Carlo approach, can provide important information about the vertical distribution of the aerosols and the gases composing Titan's atmosphere.[1]Bellucci et al., (2009). Icarus, 201, Issue 1, p. 198-216.[2]de Kok et al., (2007). Icarus, 191, Issue 1, p. 223-235.

Mapping polar atmospheric features on Titan with VIMS: From the dissipation of the northern cloud to the onset of a southern polar vortex

NASA Astrophysics Data System (ADS)

Le Mouélic, S.; Rodriguez, S.; Robidel, R.; Rousseau, B.; Seignovert, B.; Sotin, C.; Barnes, J. W.; Brown, R. H.; Baines, K. H.; Buratti, B. J.; Clark, R. N.; Nicholson, P. D.; Rannou, P.; Cornet, T.

2018-09-01

We have analyzed the complete archive of the Visual and Infrared Mapping Spectrometer (VIMS) data in order to monitor and analyze the evolution of the clouds and haze coverage at both poles of Titan during the entire Cassini mission. Our objective is to give a cartographic synopsis from a VIMS perspective, to provide a global view of the seasonal evolution of Titan's atmosphere over the poles. We leave the detailed comparison with the Imaging Science Subsystem (ISS) and the Composite Infrared Spectrometer (CIRS) data sets to further studies. We have computed global hyperspectral mosaics for each of the 127 targeted flybys of Titan to produce synthetic color maps emphasizing the main atmospheric features. The north pole appears fully covered by a huge cloud as soon as the first observations in 2004 and up to the equinox in 2009 (Le Mouélic et al., 2012). The northern skies then became progressively clearer, after the circulation turnover in 2009, revealing the underlying lakes and seas to the optical instruments up to 2017. The reverse situation is observed over the south pole, which was mostly clear of such a high obscuring cloud during the first years of the mission, but started to develop a polar cloud in 2012. This feature grew up month after month until the end of the mission in 2017, with a poleward latitudinal extent of 75 °S in 2013 up to 58 °S in April 2017. Thanks to the spectral capabilities of VIMS, we have detected HCN spectral signatures over the north pole in almost all flybys between 2004 and 2008. These HCN signatures started then to show up over the south pole in almost all flybys between 2012 and 2017, so perfectly matching the timing and spatial extent of the northern and southern polar atmospheric features.

Pseudomonas aeruginosa-producing Metallo-β-lactamases (VIM, IMP, SME, and AIM) in the Clinical Isolates of Intensive Care Units, a University Hospital in Isfahan, Iran

PubMed Central

Khorvash, Farzin; Yazdani, Mohammadreza; Shabani, Shiva; Soudi, Aliasghar

2017-01-01

Background: Pseudomonas aeruginosa is a severe challenge for antimicrobial therapy, due to the chromosomal mutations or exhibition of intrinsic resistance to various antimicrobial agents such as most β-lactams. We undertook this study to evaluate the existence of SME, IMP, AIM, and VIM metallo-β-lactamases (MBL) encoding genes among P. aeruginosa strains isolated from Intensive Care Unit (ICU) patients in Al-Zahra Hospital in Isfahan, Iran. Materials and Methods: In a retrospective cross-sectional study that was conducted between March 2012 and April 2013, a total of 48 strains of P. aeruginosa were collected from clinical specimens of bedridden patients in ICU wards. Susceptibility test was performed by disc diffusion method. All of the meropenem-resistant strains were subjected to modified Hodge test for detection of carbapenemases. Multiplex polymerase chain reaction was performed for detection of blaVIM, blaIMP, blaAIM, and blaSME genes. Results: In disk diffusion method, imipenem and meropenem showed the most and colistin the least resistant antimicrobial agents against P. aeruginosa strains. Of the 48 isolates, 36 (75%) were multidrug resistant (MDR). Amplification of β-lactamase genes showed the presence of blaVIM genes in 7 (%14.6) strains and blaIMP genes in 15 (31.3%) strains. All of the isolates were negative for blaSME and blaAIM genes. We could not find any statistically significant difference among the presence of this gene and MDR positive, age, or source of the specimen. Conclusion: As patients with infections caused by MBL-producing bacteria are at an intensified risk of treatment failure, fast determination of these organisms is necessary. Our findings may provide useful insights in replace of the appropriate antibiotics and may also prevent MBLs mediated resistance problem. PMID:29285477

Statistical Clustering and Compositional Modeling of Iapetus VIMS Spectral Data

NASA Astrophysics Data System (ADS)

Pinilla-Alonso, N.; Roush, T. L.; Marzo, G.; Dalle Ore, C. M.; Cruikshank, D. P.

2009-12-01

It has long been known that the surfaces of Saturn's major satellites are predominantly icy objects [e.g. 1 and references therein]. Since 2004, these bodies have been the subject of observations by the Cassini-VIMS (Visual and Infrared Mapping Spectrometer) experiment [2]. Iapetus has the unique property that the hemisphere centered on the apex of its locked synchronous orbital motion around Saturn has a very low geometrical albedo of 2-6%, while the opposite hemisphere is about 10 times more reflective. The nature and origin of the dark material of Iapetus has remained a question since its discovery [3 and references therein]. The nature of this material and how it is distributed on the surface of this body, can shed new light into the knowledge of the Saturnian system. We apply statistical clustering [4] and theoretical modeling [5,6] to address the surface composition of Iapetus. The VIMS data evaluated were obtained during the second flyby of Iapetus, in September 2007. This close approach allowed VIMS to obtain spectra at relatively high spatial resolution, ~1-22 km/pixel. The data we study sampled the trailing hemisphere and part of the dark leading one. The statistical clustering [4] is used to identify statistically distinct spectra on Iapetus. The composition of these distinct spectra are evaluated using theoretical models [5,6]. We thank Allan Meyer for his help. This research was supported by an appointment to the NASA Postdoctoral Program at the Ames Research Center, administered by Oak Ridge Associated Universities through a contract with NASA. [1] A, Coradini et al., 2009, Earth, Moon & Planets, 105, 289-310. [2] Brown et al., 2004, Space Science Reviews, 115, 111-168. [3] Cruikshank, D. et al Icarus, 2008, 193, 334-343. [4] Marzo, G. et al. 2008, Journal of Geophysical Research, 113, E12, CiteID E12009. [5] Hapke, B. 1993, Theory of reflectance and emittance spectroscopy, Cambridge University Press. [6] Shkuratov, Y. et al. 1999, Icarus, 137, 235-246.

Monitoring the Seasonal Evolution of the North and South Polar Vortex on Titan during 10 Years with Cassini/Vims

NASA Astrophysics Data System (ADS)

Le Mouelic, S.; Rousseau, B.; Rodriguez, S.; Cornet, T.; Sotin, C.; Barnes, J. W.; Brown, R. H.; Buratti, B. J.; Baines, K. H.; Clark, R. N.; Nicholson, P. D.

2014-12-01

Cassini entered in Saturn's orbit in July 2004. In ten years, more than 100 targeted flybys of Titan have been performed. We focus our study on the comprehensive analysis of the Visual and Infrared Mapping Spectrometer data set acquired between 2004 and 2014, with a particular emphasis on the atmospheric polar features. First evidences for a vast ethane cloud covering the North Pole have been detected as soon as the second targeted flyby in December 2005 [1]. The first detailed imaging of this north polar feature with VIMS was obtained in December 2006, thanks to a change in inclination of the spacecraft orbit [2]. At this time, the northern lakes and seas of Titan were totally masked to the optical instruments by the haze and clouds, whereas the southern pole was well illuminated and mostly clear of haze and vast clouds. Subsequent flybys revealed that the vast north polar feature was progressively vanishing around the equinox in 2009 [2,3,4], in agreement with the predictions of Global Circulation Models [5]. It revealed progressively the underlying lakes to the ISS and VIMS instruments. First evidences of an atmospheric vortex growing over the South Pole occurred in May 2012, with a high altitude feature detected at each flybys since then. In this study, we have computed individual global maps of the north and south poles for each of the 100 targeted flybys, using VIMS wavelengths sensitive both to clouds and surface features. This allows a more complete monitoring of the evolution of the north polar cloud than was previously done before using a selection of individual flybys only. It also provides a detailed investigation of what is currently acting over the South Pole. [1] Griffith et al., Science, 2006. [2] Le Mouélic et al., PSS, 2012. [3] Rodriguez et al., Nature, 2009. [4] Rodriguez et al., Icarus 2011. [5] Rannou et al., Science 2005

Distribution of Ambler class A, B and D β-lactamases among Pseudomonas aeruginosa isolates.

PubMed

Tawfik, Abdulkader F; Shibl, Atef M; Aljohi, Mohamed A; Altammami, Musaad A; Al-Agamy, Mohamed H

2012-09-01

We determined the prevalence rate of classes A, B and D β-lactamases among extended-spectrum cephalosporin (ESC)-non-susceptible Pseudomonas aeruginosa clinical isolates from burned patients. Disc susceptibility testing was performed on 156 P. aeruginosa isolates collected during 2010 at Prince Salman Hospital in Riyadh, Saudi Arabia. Phenotypic screening of ESBLs and MBLs in the isolates resistant to ceftazidime (MIC>8 mg/L) was carried out. Genes encoding ESBLs and MBL were sought by PCR in ESBL- and MBL-producing isolates. The resistance rate to ceftazidime was 22.43%. The resistance rates for ESC-non-susceptible P. aeruginosa isolates to piperacillin, piperacillin/tazobactam, cefepime, aztreonam, imipenem, amikacin, gentamicin and ciprofloxacin were 100%, 71.14%, 88.57%, 48.57%, 70.0%, 82.5%, 87.5%, and 90.0% respectively. No resistance was detected to polymyxine B. The prevalence of ESBL and MBL in ESC-non-susceptible P. aeruginosa was 69.44% and 42.85%, respectively. The prevalence of structural genes for VEB-1, OXA-10 and GES ESBLs in P. aeruginosa was 68%, 56% and 20%, respectively. VIM gene was detected in 15 (100%) of MBL-producing isolates. OXA-10 like gene was concomitant with VEB, GES and/or VIM. Eight isolates harbored OXA-10 with VEB (imipenem MIC 6-8 mg/L), while five isolates harbored OXA-10 with VIM (imipenem MIC ≥ 32 mg/L) and one isolate contained OXA-10, VEB and GES (imipenem MIC 8 mg/L). PER was not detected in this study. VEB-1 and OXA-10 are the predominant ESBL genes and bla(VIM) is the dominate MBL gene in ESC-non-sensitive P. aeruginosa isolates in Saudi Arabia. VEB, OXA-10 and GES ESBLs have not been reported previously in Saudi Arabia and GES has not been reported previously in Middle East and North Africa. Copyright © 2012 Elsevier Ltd and ISBI. All rights reserved.

Numerical simulation of the induction heating of hybrid semi-finished materials into the semi-solid state

NASA Astrophysics Data System (ADS)

Seyboldt, Christoph; Liewald, Mathias

2017-10-01

Current research activities at the Institute for Metal Forming Technology (IFU) of the University of Stuttgart are focusing on the manufacturing of hybrid components using semi-solid forming strategies. As part of the research project "Hybrid interaction during and after thixoforging of multi-material systems", which is founded by the German Research Foundation (DFG), a thixoforging process for producing hybrid components with cohesive metal-to-metal connections is developed. In this context, this paper deals with the numerical simulation of the inductive heating process of hybrid semi-finished materials, consisting of two different aluminium alloys. By reason of the skin effect that leads to inhomogeneous temperature distributions during inductive heating processes, the aluminium alloy with the higher melting point is thereby assembled in the outer side and the alloy with the lower melting point is assembled in the core of the semi-finished material. In this way, the graded heat distribution can be adapted to the used materialś flow properties that are heavily heat dependent. Without this graded heat distribution a proper forming process in the semi-solid state will not be possible. For numerically modelling the inductive heating system of the institute, a coupling of the magnetostatic and the thermal solver was realized by using Ansys Workbench. While the electromagnetic field and its associated heat production rate were solved in a frequency domain, the temperature development was solved in the time based domain. The numerical analysis showed that because of the high thermal conductivity of the aluminium, which leads to a rapid temperature equalization in the semi-finished material, the heating process has to be fast and with a high frequency for produce most heat in the outer region of the material. Finally, the obtained numerical results were validated with experimental heating tests.

Effect of Feed Forms on the Results of Melting of Fly Ash by a DC Plasma Arc Furnace

NASA Astrophysics Data System (ADS)

Chen, Mingzhou; Meng, Yuedong; Shi, Jiabiao; Ni, Guohua; Jiang, Yiman; Yu, Xinyao; ZHAO, Peng

2009-10-01

Fly ash from a municipal solid waste incinerator (MSWI) without preprocessing (original fly ash, OFA) was melted by a direct current (DC) plasma arc furnace to investigate how the feed forms governed the results. Dioxins in flue gas from stack and bag-filter ash (BFA) were detected. The distribution of heavy metals of Pb, Cd, As, and Cr along the flue gas process system was analyzed. Through a comparison of the results for dioxins and heavy metals in this study and previous work, carrying-over of fly ash particles with the flue gas stream can be deduced. Based on the magnetic induction equation and Navier-Stokes equations, a magnetohydrodynamic (MHD) model for the plasma arc was developed to describe the particle-carrying effect. The results indicate that, a. when melted, the feed forms of MSWI fly ash affect the results significantly; b. it is not preferable to melt MSWI fly ash directly, and efforts should be made to limit the mass transfer of OFA from the plasma furnace.

Preparation of low strategic metal content superalloys

NASA Technical Reports Server (NTRS)

Sczerzenie, F. E.; Maurer, G. E.

1982-01-01

The properties of modified NIMONIC 115 and UDIMET 720 with reduced levels of cobalt were evaluated. Vacuum induction melted and vacuum arc remelted ingots were hot rolled to 3/4 inch diameter bar. Hot workability was evaluated in terms of the ingot rolling behavior and the hot ductility of the as-rolled bar. Variations in workability and bar ductility were correlated to variations in incipient melting temperature and gamma prime solvus, both of which varied with cobalt content. Heat treatments were defined to yield, as far as possible, similar structures from alloy to alloy. At the lowest cobalt levels N-115 workability was severely limited and the alloys could not be worked to bar. It is suggested that incipient melting in combination with heavy grain boundary carbide precipitation reduced ingot workability. Final heat treatment of modified alloys was difficult in the situation where the gamma prime solvus temperature was close to the incipient melting point, indicating that it may not be feasible to fully solution low cobalt alloys to obtain the large grain size required for optimum creep resistance.

Metallurgical characterization of experimental Ag-based soldering alloys.

PubMed

Ntasi, Argyro; Al Jabbari, Youssef S; Silikas, Nick; Al Taweel, Sara M; Zinelis, Spiros

2014-10-01

To characterize microstructure, hardness and thermal properties of experimental Ag-based soldering alloys for dental applications. Ag12Ga (AgGa) and Ag10Ga5Sn (AgGaSn) were fabricated by induction melting. Six samples were prepared for each alloy and microstructure, hardness and their melting range were determined by, scanning electron microscopy, energy dispersive X-ray (EDX) microanalysis, X-ray diffraction (XRD), Vickers hardness testing and differential scanning calorimetry (DSC). Both alloys demonstrated a gross dendritic microstructure while according to XRD results both materials consisted predominately of a Ag-rich face centered cubic phase The hardness of AgGa (61 ± 2) was statistically lower than that of AgGaSn (84 ± 2) while the alloys tested showed similar melting range of 627-762 °C for AgGa and 631-756 °C for AgGaSn. The experimental alloys tested demonstrated similar microstructures and melting ranges. Ga and Sn might be used as alternative to Cu and Zn to modify the selected properties of Ag based soldering alloys.

Metallurgical characterization of experimental Ag-based soldering alloys

PubMed Central

Ntasi, Argyro; Al Jabbari, Youssef S.; Silikas, Nick; Al Taweel, Sara M.; Zinelis, Spiros

2014-01-01

Aim To characterize microstructure, hardness and thermal properties of experimental Ag-based soldering alloys for dental applications. Materials and methods Ag12Ga (AgGa) and Ag10Ga5Sn (AgGaSn) were fabricated by induction melting. Six samples were prepared for each alloy and microstructure, hardness and their melting range were determined by, scanning electron microscopy, energy dispersive X-ray (EDX) microanalysis, X-ray diffraction (XRD), Vickers hardness testing and differential scanning calorimetry (DSC). Results Both alloys demonstrated a gross dendritic microstructure while according to XRD results both materials consisted predominately of a Ag-rich face centered cubic phase The hardness of AgGa (61 ± 2) was statistically lower than that of AgGaSn (84 ± 2) while the alloys tested showed similar melting range of 627–762 °C for AgGa and 631–756 °C for AgGaSn. Conclusion The experimental alloys tested demonstrated similar microstructures and melting ranges. Ga and Sn might be used as alternative to Cu and Zn to modify the selected properties of Ag based soldering alloys. PMID:25382945

Carbon dioxide on the satellites of Saturn: Results from the Cassini VIMS investigation and revisions to the VIMS wavelength scale

USGS Publications Warehouse

Cruikshank, D.P.; Meyer, A.W.; Brown, R.H.; Clark, R.N.; Jaumann, R.; Stephan, K.; Hibbitts, C.A.; Sandford, S.A.; Mastrapa, R.M.E.; Filacchione, G.; Ore, C.M.D.; Nicholson, P.D.; Buratti, B.J.; McCord, T.B.; Nelson, R.M.; Dalton, J.B.; Baines, K.H.; Matson, D.L.

2010-01-01

Several of the icy satellites of Saturn show the spectroscopic signature of the asymmetric stretching mode of C-O in carbon dioxide (CO2) at or near the nominal solid-phase laboratory wavelength of 4.2675 ??m (2343.3 cm-1), discovered with the Visible-Infrared Mapping Spectrometer (VIMS) on the Cassini spacecraft. We report here on an analysis of the variation in wavelength and width of the CO2 absorption band in the spectra of Phoebe, Iapetus, Hyperion, and Dione. Comparisons are made to laboratory spectra of pure CO2, CO2 clathrates, ternary mixtures of CO2 with other volatiles, implanted and adsorbed CO2 in non-volatile materials, and ab initio theoretical calculations of CO2 * nH2O. At the wavelength resolution of VIMS, the CO2 on Phoebe is indistinguishable from pure CO2 ice (each molecule's nearby neighbors are also CO2) or type II clathrate of CO2 in H2O. In contrast, the CO2 band on Iapetus, Hyperion, and Dione is shifted to shorter wavelengths (typically ???4.255 ??m (???2350.2 cm-1)) and broadened. These wavelengths are characteristic of complexes of CO2 with different near-neighbor molecules that are encountered in other volatile mixtures such as with H2O and CH3OH, and non-volatile host materials like silicates, some clays, and zeolites. We suggest that Phoebe's CO2 is native to the body as part of the initial inventory of condensates and now exposed on the surface, while CO2 on the other three satellites results at least in part from particle or UV irradiation of native H2O plus a source of C, implantation or accretion from external sources, or redistribution of native CO2 from the interior. The analysis presented here depends on an accurate VIMS wavelength scale. In preparation for this work, the baseline wavelength calibration for the Cassini VIMS was found to be distorted around 4.3 ??m, apparently as a consequence of telluric CO2 gas absorption in the pre-launch calibration. The effect can be reproduced by convolving a sequence of model detector response profiles with a deep atmospheric CO2 absorption profile, producing distorted detector profile shapes and shifted central positions. In a laboratory blackbody spectrum used for radiance calibration, close examination of the CO2 absorption profile shows a similar deviation from that expected from a model. These modeled effects appear to be sufficient to explain the distortion in the existing wavelength calibration now in use. A modification to the wavelength calibration for 13 adjacent bands is provided. The affected channels span about 0.2 ??m centered on 4.28 ??m. The maximum wavelength change is about 10 nm toward longer wavelength. This adjustment has implications for interpretation of some of the spectral features observed in the affected wavelength interval, such as from CO2, as discussed in this paper.

Pure Material Vapor Source by Induction Heating Evaporator for an Electron Cyclotron Resonance Ion Source

NASA Astrophysics Data System (ADS)

Matsui, Y.; Watanabe, T.; Satani, T.; Muramatsu, M.; Tanaka, K.; Kitagawa, A.; Yoshida, Y.; Sato, F.; Kato, Y.; Iida, T.

2008-11-01

Multiply charged iron ions are produced from solid pure material in an electron cyclotron resonance (ECR) ion source. We develop an evaporator by using induction heating with the induction coil which is made from bare molybdenum wire and surrounding the pure iron rod. We optimize the shape of induction heating coil and operation of rf power supply. We conduct experiment to investigate reproducibility and stability in the operation and heating efficiency. Induction heating evaporator produces pure material vapor, because materials directly heated by eddy currents have non-contact with insulated materials which are impurity gas sources. The power and the frequency of the induction currents range from 100 to 900 W and from 48 to 23 kHz, respectively. The working pressure is about 10-4 to 10-3 Pa. We measure temperature of iron rod and film deposition rate by depositing iron vapor to crystal oscillator. We confirm stability and reproducibility of evaporator enough to conduct experiment in ECR ion source. We can obtain required temperature of iron under maximum power of power supply. We are aiming the evaporator higher melting point material than iron.

Turbine blade processing

NASA Technical Reports Server (NTRS)

1975-01-01

Space processing of directionally solidified eutectic-alloy type turbine blades is envisioned as a simple remelt operations in which precast blades are remelted in a preformed mold. Process systems based on induction melting, continuous resistance furnaces, and batch resistance furnaces were evaluated. The batch resistance furnace type process using a multiblade mold is considered to offer the best possibility for turbine blade processing.

Beach Changes at Nauset Inlet, Cape Cod, Massachusetts 1670-1981.

DTIC Science & Technology

1982-08-01

1962 23 Mar USCGS NOS V 53080, 3082 1:18,746 1965 21 April LKBI LKBI V 5520; 52 - 624 1:40,060 1965 11 June VIMS (RJB) V 1:5540 1965 25 Aug. VIMS (RJB) V...STATION SLOPE INTERCEPT R 2 (m y r) (m) 1 -2.5 412 0.61 2 -1.7 405 0.25 3 -1.7 416 n.28 4 -2.3 480 0.35 5 -3.6 553 0.42 6 -5.3 624 0.18 7 -4.7 457 0.15...8 -2.0 504 0.02 9 -3.3 605 0.42 10 -2.0 502 0.57 -22- 1962 to 1967, the shoreline moved seaward 160 m. The period 1967 to May 1979 has seen a

Experimental and numerical modelling of the fluid flow in the continuous casting of steel

NASA Astrophysics Data System (ADS)

Timmel, K.; Miao, X.; Wondrak, T.; Stefani, F.; Lucas, D.; Eckert, S.; Gerbeth, G.

2013-03-01

This article gives an overview of recent research activities with respect to the mold flow in the continuous casting of steel in presence of DC magnetic fields. The magnetic fields appear to be an attractive tool for controlling the melt flow in a contactless way. Various kinds of magnetic systems are already in operation in industrial steel casting, but the actual impact on the melt flow has not been sufficiently verified by experimental studies. The rapid development of innovative diagnostic techniques in low-melting liquid metals over the last two decades enables new possibilities for systematic flow measurements in liquid metal model experiments. A new research program was initiated at HZDR comprising three experimental facilities providing a LIquid Metal Model for continuous CASTing of steel (LIMMCAST). The facilities operate in a temperature range from room temperature up to 400∘C using the low-melting alloys GaInSn and SnBi, respectively. The experimental program is focused on quantitative flow measurements in the mold, the submerged entry nozzle and the tundish. Local potential probes, Ultrasonic Doppler Velocimetry (UDV) and Contactless Inductive Flow Tomography (CIFT) are employed to measure the melt flow. The behavior of two-phase flows in case of argon injection is investigated by means of the Mutual Inductance Tomography (MIT) and X-ray radioscopy. The experimental results provide a substantial data basis for the validation of related numerical simulations. Numerical calculations were performed with the software package ANSYS-CFX with an implemented RANS-SST turbulence model. The non-isotropic nature of MHD turbulence was taken into account by specific modifications of the turbulence model. First results of the LIMMCAST program reveal important findings such as the peculiar, unexpected phenomenon that the application of a DC magnetic field may excite non-steady, non-isotropic large-scale flow oscillations in the mold. Another important result of our study is that electrical boundary conditions, namely the wall conductivity ratio, have a serious influence on the mold flow while it is exposed to an external magnetic field.

CO concentration in the upper stratosphere and mesosphere of Titan from VIMS dayside limb observations at 4.7 μm

NASA Astrophysics Data System (ADS)

Fabiano, F.; López Puertas, M.; Adriani, A.; Moriconi, M. L.; D'Aversa, E.; Funke, B.; López-Valverde, M. A.; Ridolfi, M.; Dinelli, B. M.

2017-09-01

During the last 30 years, many works have focused on the determination of the CO abundance in Titan's atmosphere, but no measurement above 300 km has been done yet due to the faint signal of CO. Nevertheless, such measurements are particularly awaited as a confirmation of photochemical models predictions that CO is uniformly mixed in the whole atmosphere. Moreover, since CO is the main atmospheric reservoir of oxygen, its actual abundance has implications on the origins of Titan's atmosphere. In this work, we analyse a set of Cassini VIMS daytime limb observations of Titan at 4.7 μm, which is dominated by solar-pumped non-LTE (non-local thermodynamic equilibrium) emission of CO ro-vibrational bands. In order to retrieve the CO abundance from these observations, we developed a non-LTE model for the CO vibrational levels. The retrieval of the CO concentration is performed following a bayesian approach and using the calculated non-LTE populations. The data set analysed consists of 47 limb scanning sequences -about 1500 spectra- acquired by VIMS in 2006 and 2007. CO relative abundance profiles from 200 to 500 km are obtained, for each set analysed. The mean result shows no significant variations with altitude and is consistent with the prediction of a well-mixed vertical profile. However, if compared with Earth-based mm measurements, a small vertical gradient is plausible.

Power of data mining methods to detect genetic associations and interactions.

PubMed

Molinaro, Annette M; Carriero, Nicholas; Bjornson, Robert; Hartge, Patricia; Rothman, Nathaniel; Chatterjee, Nilanjan

2011-01-01

Genetic association studies, thus far, have focused on the analysis of individual main effects of SNP markers. Nonetheless, there is a clear need for modeling epistasis or gene-gene interactions to better understand the biologic basis of existing associations. Tree-based methods have been widely studied as tools for building prediction models based on complex variable interactions. An understanding of the power of such methods for the discovery of genetic associations in the presence of complex interactions is of great importance. Here, we systematically evaluate the power of three leading algorithms: random forests (RF), Monte Carlo logic regression (MCLR), and multifactor dimensionality reduction (MDR). We use the algorithm-specific variable importance measures (VIMs) as statistics and employ permutation-based resampling to generate the null distribution and associated p values. The power of the three is assessed via simulation studies. Additionally, in a data analysis, we evaluate the associations between individual SNPs in pro-inflammatory and immunoregulatory genes and the risk of non-Hodgkin lymphoma. The power of RF is highest in all simulation models, that of MCLR is similar to RF in half, and that of MDR is consistently the lowest. Our study indicates that the power of RF VIMs is most reliable. However, in addition to tuning parameters, the power of RF is notably influenced by the type of variable (continuous vs. categorical) and the chosen VIM. Copyright © 2011 S. Karger AG, Basel.

First Detection of VIM-4-Producing Pseudomonas aeruginosa and OXA-48-Producing Klebsiella pneumoniae in Northeastern (Annaba, Skikda) Algeria.

PubMed

Mellouk, Fatma Zohra; Bakour, Sofiane; Meradji, Sameh; Al-Bayssari, Charbel; Bentakouk, Mohamed Cherif; Zouyed, Fatiha; Djahoudi, Abdelghani; Boutefnouchet, Nafissa; Rolain, Jean Marc

2017-04-01

The aim of the study was to investigate the prevalence and molecular support of carbapenem resistance in gram-negative bacilli clinical isolates collected between March 2013 and March 2015 in three cities (Annaba, Skikda, and Guelma) in northeastern Algeria. One hundred eighty-six isolates were identified as Enterobacteriaceae (161), Pseudomonas aeruginosa (18), and Acinetobacter baumannii (7). Thirty-six of 186 (19.3%) were resistant to carbapenems. Among them, 11 harbored carbapenemase genes, including bla OXA-48 (2 Klebsiella pneumoniae), bla VIM-4 (2 P. aeruginosa), bla NDM-1 (2 A. baumannii), and bla OXA-23 (5 A. baumannii). In addition, other β-lactamases were detected: bla CTX-M-(15/66/139) , bla SHV-(28/85/1/133) , and bla TEM-1 . All imipenem-resistant P. aeruginosa displayed OprD mutations. Multilocus sequence typing demonstrated the presence of ST 404 and ST 219 in K. pneumoniae, ST 2 and ST 85 in A. baumannii, and ST (244, 1076, 241, 227, and 233) in P. aeruginosa. In this study, we report the first detection of P. aeruginosa ST 1076 harboring the bla VIM-4 gene in African countries in two cities (Annaba and Skikda) in northeastern Algeria. Additionally, we report the first detection of bla OXA-48 in K. pneumoniae ST 404 and ST 219 in Algerian cities (Annaba and Skikda).

Spatial variations in the dust-to-gas ratio of Enceladus' plume

NASA Astrophysics Data System (ADS)

Hedman, M. M.; Dhingra, D.; Nicholson, P. D.; Hansen, C. J.; Portyankina, G.; Ye, S.; Dong, Y.

2018-05-01

On day 138 of 2010, the plume of dust and gas emerging from Enceladus' South Polar Terrain passed between the Sun and the Cassini spacecraft. This solar occultation enabled Cassini's Ultraviolet Imaging Spectrograph (UVIS) and the Visual and Infrared Mapping Spectrometer (VIMS) to obtain simultaneous measurements of the plume's gas and dust components along the same lines of sight. The UVIS measurements of the plume's gas content are described in Hansen et al. (2011, GRL 38:11202) , while this paper describes the VIMS data and the information they provide about the plume's particle content. Together, the VIMS and UVIS measurements reveal that the plume material above Baghdad and Damascus sulci has a dust-to-gas mass ratio that is roughly an order of magnitude higher than the material above Alexandria and Cairo sulci. Similar trends in the plume's dust-to-gas ratio are also found in data obtained when Cassini flew through the plume in 2009, during which time the Ion and Neutral Mass Spectrometer (INMS), Radio and Plasma Wave Science instrument (RPWS) and Cosmic Dust Analyzer (CDA) instruments made in-situ measurements of the plume's gas and dust densities (Dong et al. 2015 JGR 120:915-937). These and other previously-published systematic differences in the material erupting from different fissures likely reflect variations in subsurface conditions across Encealdus' South Polar Terrain.

Saturn's Titan: Searching for Surface Change

NASA Astrophysics Data System (ADS)

Nelson, R. M.; Kamp, L.; Matson, D. L.; Boryta, M. D.; Leader, F.; Baines, K. H.; Lopes, R.; Smythe, W. D.; Jauman, R.; Sotin, C.; Clark, R. N.; Cruikshank, D. P.; Drosart, P.; Hapke, B. W.; Buratti, B. J.; Brown, R. H.; Sicardy, B.; Lunine, J. I.; Combes, M.; Belucci, G.; Biebring, J.; Capaccioni, M.; Cerroni, P.; Corodini, A.; Formisano, V.; Filacchione, G.; Langevin, Y.; McCord, T.; Mennella, V.; Nicholson, P.

2007-12-01

The VIMS instrument on the Cassini spacecraft observes the surface of Titan through spectral 'windows' in its atmosphere where methane, the principal absorbing gas is transmitting. We previously have used VIMS to document changes in spectral reflectance and that have occurred on Titan's surface during Cassini's orbital tour at (latitude 26S, longitude 78W), (AGU spring meeting 2007). Having removed the possibility that the observed changes are either an atmospheric phenomenon or are the result of viewing angle (phase) effects, we conclude that physical changes in the chemistry or structure of the surface must be occurring. The size of the region suggests it may exceed the size of the largest active volcanic areas in the solar system. We now have explored additional sections of Titan's surface and have developed new techniques for locating surface changes over time. While some additional candidate areas for surface activity are suggested, confirmation is possible with the support of additional instruments on the Cassini Orbiter, particularly the radar instrument. The principal difficulty in implementing a coordinated program of observations with both instruments is due to the radar instrument's higher spatial resolution but small footprint on the surface relative to VIMS. In addition, the two instruments can not be used simultaneously on the same pass. Overlapping coverage will only be available after repeated flybys during Cassini's extended mission. This work done at JPL/CALTECH under contract with NASA

Subcortical roles in lexical task processing: Inferences from thalamic and subthalamic event-related potentials.

PubMed

Tiedt, Hannes O; Ehlen, Felicitas; Krugel, Lea K; Horn, Andreas; Kühn, Andrea A; Klostermann, Fabian

2017-01-01

Subcortical functions for language capacities are poorly defined, but may be investigated in the context of deep brain stimulation. Here, we studied event-related potentials recorded from electrodes in the subthalamic nucleus (STN) and the thalamic ventral intermediate nucleus (VIM) together with surface-EEG. Participants completed a lexical decision task (LDT), which required the differentiation of acoustically presented words from pseudo-words by button press. Target stimuli were preceded by prime-words. In recordings from VIM, a slow potential shift apparent at the lower electrode contacts persisted during target stimulus presentation (equally for words and pseudo-words). In contrast, recordings from STN electrodes showed a short local activation on prime-words but not target-stimuli. In both depth-recording regions, further components related to contralateral motor responses to target words were evident. On scalp level, mid-central activations on (pseudo)lexical stimuli were obtained, in line with the expression of N400 potentials. The prolonged activity recorded from VIM, exclusively accompanying the relevant LDT phase, is in line with the idea of thalamic "selective engagement" for supporting the realization of the behavioral focus demanded by the task. In contrast, the phasic prime related activity rather indicates "procedural" STN functions, for example, for trial sequencing or readiness inhibition of prepared target reactions. Hum Brain Mapp 38:370-383, 2017. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

MRI-guided focused ultrasound thalamotomy in non-ET tremor syndromes.

PubMed

Fasano, Alfonso; Llinas, Maheleth; Munhoz, Renato P; Hlasny, Eugen; Kucharczyk, Walter; Lozano, Andres M

2017-08-22

To report the 6-month single-blinded results of unilateral thalamotomy with MRI-guided focused ultrasound (MRgFUS) in patients with tremors other than essential tremor. Three patients with tremor due to Parkinson disease, 2 with dystonic tremor in the context of cervicobrachial dystonia and writer's cramp, and 1 with dystonia gene-associated tremor underwent MRgFUS targeting the ventro-intermedius nucleus (Vim) of the dominant hemisphere. The primary endpoint was the reduction of lateralized items of the Tremor Rating Scale of contralateral hemibody assessed by a blinded rater. All patients achieved a statistically significant, immediate, and sustained improvement of the contralateral tremor score by 42.2%, 52.0%, 55.9%, and 52.9% at 1 week and 1, 3, and 6 months after the procedure, respectively. All patients experienced transient side effects and 2 patients experienced persistent side effects at the time of last evaluation: hemitongue numbness and hemiparesis with hemihypoesthesia. Vim MRgFUS is a promising, incision-free, but nevertheless invasive technique to effectively treat tremors other than essential tremor. Future studies on larger samples and longer follow-up will further define its effectiveness and safety. NCT02252380. This study provides Class IV evidence that for patients with tremor not caused by essential tremor, MRgFUS of the Vim improves the tremor of the contralateral hemibody at 6 months. © 2017 American Academy of Neurology.

Effect of Boron and Phosphate compounds on Thermal and Fire Properties of wood/HDPE composites

Treesearch

Turgay Akbulut; Nadir Ayrilmis; Turker Dundar; Ali Durmus; Robert H. White; Murat Teker

2011-01-01

Melting and non-isothermal crystallization behaviors, oxidative induction time, and fire performance of the injection-molded wood flour-high density polyethylene (HDPE) composites (WPCs) incorporated with different levels (4, 8, or 12 wt %) of boron compounds [borax/boric acid (BX/BA) (0.5:0.5 wt %), zinc borate (ZB)] and phosphorus compounds [mono- and di-ammonium...

Structural Characteristics and In Vitro Biodegradation of a Novel Zn-Li Alloy Prepared by Induction Melting and Hot Rolling

NASA Astrophysics Data System (ADS)

Zhao, Shan; McNamara, Cameron T.; Bowen, Patrick K.; Verhun, Nicholas; Braykovich, Jacob P.; Goldman, Jeremy; Drelich, Jaroslaw W.

2017-03-01

Zinc shows great promise as a bioabsorbable metal; however, the low tensile strength of pure zinc limits its application for endovascular stent purposes. In this study, a new Zn- xLi alloy (with x = 2, 4, 6 at. pct) was prepared by induction melting in an argon atmosphere and processed through hot rolling. Structures of the formulated binary alloys were characterized by X-ray diffraction and optical microscopy. Mechanical testing showed that the incorporation of Li into Zn increased ultimate tensile strength from <120 MPa (pure Zn) to >560 MPa ( x = 6 at. pct). In vitro corrosion behavior was evaluated by immersion tests in simulated body fluid. The Zn-2Li and Zn-4Li corrosion study demonstrated that corrosion rates and products resemble those observed for pure Zn in vivo, and in addition, the Zn-4Li alloy exhibits higher resistance to corrosion as compared to Zn-2Li. The findings herein encourage further exploration of Zn-Li systems for structural use in biomedical vascular support applications with the ultimate goal of simplifying stent procedures, thereby reducing stent-related complications.

[Prevalence of metallo-beta-lactamase in carbapenem resistant Pseudomonas aeruginosa at a university hospital of Buenos Aires City].

PubMed

Pagniez, G; Radice, M; Cuirolo, A; Rodríguez, O; Rodríguez, H; Vay, C; Famiglietti, A; Gutkind, G

2006-01-01

The present study was conducted to estimate the prevalence of metallo-beta-lactamases in 91 consecutive carbapenem resistant Pseudomonas aeruginosa isolates, recovered from inpatients at Hospital de Clínicas in Buenos Aires. Both, phenotypic and genotypic methods detected the presence of carbapenemases in 10 (11%) isolates, corresponding to VIM-11 in 7/10 and VIM-2 in the others. Codifying genes were all included in class 1 integrons, upstream genes coding for aminoglycoside modifying enzymes. One hundred percent sensitivity and specificity was achieved by the metallo-beta-lactamases phenotypic screening method using EDTA (1 micromol) disks in the Pseudomonas aeruginosa isolates included in this study. Sensitivity to aztreonam in carbapenem resistant isolates was suspicious of the presence of these enzymes.

Fast forward modeling of Titan's infrared spectra to invert VIMS/Cassini hyperspectral images

USGS Publications Warehouse

Rodriguez, S.; Le Mouélic, Stéphane; Rannou, P.; Combe, J.-P.; Corre, L.L.; Tobie, G.; Barnes, J.W.; Sotin, Christophe; Brown, R.H.; Baines, K.H.; Buratti, B.J.; Clark, R.N.; Nicholson, P.D.

2009-01-01

The surface of Titan, the largest icy moon of Saturn, is veiled by a very thick and hazy atmosphere. The Visual and Infrared Mapping Spectrometer onboard the Cassini spacecraft, in orbit around Saturn since July 2004, conduct an intensive survey of Titan with the objective to understand the complex nature of the atmosphere and surface of the mysterious moon and the way they interact. Accurate radiative transfer modeling is necessary to analyze Titan's infrared spectra, but are often very computer resources demanding. As Cassini has gathered hitherto millions of spectra of Titan and will still observe it until at least 2010, we report here on the development of a new rapid, simple and versatile radiative transfer model specially designed to invert VIMS datacubes. ?? 2009 IEEE.

Long-Term Effective Thalamic Deep Brain Stimulation for Neuropathic Tremor in Two Patients with Charcot-Marie-Tooth Disease.

PubMed

Cabañes-Martínez, Lidia; Del Álamo de Pedro, Marta; de Blas Beorlegui, Gema; Bailly-Bailliere, Ignacio Regidor

2017-01-01

It has been described that many Charcot-Marie-Tooth syndrome type 2 patients are affected by a very disabling type of tremor syndrome, the pathophysiology of which remains unclear. Deep brain stimulation (DBS) has been successfully applied to treat most types of tremors by implanting electrodes in the ventral intermediate nucleus of the thalamus (Vim). We used DBS applied to the Vim in 2 patients with severe axonal inherited polyneuropathies who developed a disabling tremor. Both patients responded positively to stimulation, with a marked reduction of the tremor and with an improvement of their quality of life. We report 2 cases of tremor associated with a hereditary neuropathy with a good response to DBS. © 2017 S. Karger AG, Basel.

High-Temperature Wettability and Interactions between Y-Containing Ni-Based Alloys and Various Oxide Ceramics

PubMed Central

Li, Jinpeng; Gao, Ming; Li, Qingling; Bian, Weidong; Tao, Tongxiang; Zhang, Hu

2018-01-01

To obtain appropriate crucible materials for vacuum induction melting of MCrAlY alloys, four different oxide ceramics, including MgO, Y2O3, Al2O3, and ZrO2, with various microstructures were designed and characterized. The high-temperature wettability and interactions between Ni-20Co-20Cr-10Al-1.5Y alloys and oxide ceramics were studied by sessile drop experiments under vacuum. The results showed that all the systems exhibited non-wetting behavior. The contact angles were stable during the melting process of alloys and the equilibrium contact angles were 140° (MgO), 148° (Y2O3), 154° (Al2O3), and 157° (ZrO2), respectively. The interfacial reaction between the ceramic substrates and alloys occurred at high temperature. Though the ceramics had different microstructures, similar continuous Y2O3 reaction layer with thicknesses of about 25 μm at the alloy-ceramic interface in MgO, Al2O3, and ZrO2 systems formed. The average area percentage of oxides in the alloy matrices were 0.59% (MgO), 0.11% (Al2O3), 0.09% (ZrO2), and 0.02% (Y2O3), respectively. The alloys, after reacting with MgO ceramic, had the highest inclusion content, while those with the lowest content were in the Y2O3 system. Y2O3 ceramic was the most beneficial for vacuum induction melting of high-purity Y-containing Ni-based alloys. PMID:29735958

Power Quality Improvement in Induction Furnace by Harmonic Reduction Using Dynamic Voltage Restorer

NASA Astrophysics Data System (ADS)

Saggu, Tejinder Singh; Singh, Lakhwinder

2016-06-01

Induction furnaces are used in wide quantity under different capacities for annual production of around 25 million tons of iron and steel in India. It plays a vital role in various manufacturing processes around the world for melting different types of metal scraps i. e. Copper, Cast Iron, Aluminium, Steel, Brass, Bronze, Silicon, Gold, Silver etc. which are further used in many other industrial applications. The induction furnace causes a huge disturbance to the utility and nearby consumers during its operation due to its non-linear characteristics. This is a serious phenomenon responsible for power quality degradation in the power system. This paper presents methodology to improve the power quality degradation caused by induction furnace using Dynamic Voltage Restorer (DVR) which is a type of custom power device. The real time data has been taken from an industry employing induction furnace for production of ingots from scrap material. The experimental readings are measured using power quality analyser equipment. The simulation of whole plant is done by analysing this same data and the simulation results are compared with actual onsite results. Then, solution methodology using DVR is presented which revealed that the implementation of DVR is an effective solution for voltage sag mitigation and harmonics improvement in induction furnace.

Magnetic flow control in growth and casting of photovoltaic silicon: Numerical and experimental results

NASA Astrophysics Data System (ADS)

Poklad, A.; Pal, J.; Galindo, V.; Grants, I.; Heinze, V.; Meier, D.; Pätzold, O.; Stelter, M.; Gerbeth, G.

2017-07-01

A novel, vertical Bridgman-type technique for growing multi-crystalline silicon ingots in an induction furnace is described. In contrast to conventional growth, a modified setup with a cone-shaped crucible and susceptor is used. A detailed numerical simulation of the setup is presented. It includes a global thermal simulation of the furnace and a local simulation of the melt, which aims at the influence of the melt flow on the temperature and concentration fields. Furthermore, seeded growth of cone-shaped Si ingots using either a monocrystalline seed or a seed layer formed by pieces of poly-Si is demonstrated and compared to growth without seeds. The influences of the seed material on the grain structure and the dislocation density of the ingots are discussed. The second part addresses model experiments for the Czochralski technique using the room temperature liquid metal GaInSn. The studies were focused on the influence of a rotating and a horizontally static magnetic field on the melt flow and the related heat transport in crucibles being heated from bottom and/or side, and cooled by a crystal model covering about 1/3 of the upper melt surface.

Metal Solidification Imaging Process by Magnetic Induction Tomography.

PubMed

Ma, Lu; Spagnul, Stefano; Soleimani, Manuchehr

2017-11-06

There are growing number of important applications that require a contactless method for monitoring an object surrounded inside a metallic enclosure. Imaging metal solidification is a great example for which there is no real time monitoring technique at present. This paper introduces a technique - magnetic induction tomography - for the real time in-situ imaging of the metal solidification process. Rigorous experimental verifications are presented. Firstly, a single inductive coil is placed on the top of a melting wood alloy to examine the changes of its inductance during solidification process. Secondly, an array of magnetic induction coils are designed to investigate the feasibility of a tomographic approach, i.e., when one coil is driven by an alternating current as a transmitter and a vector of phase changes are measured from the remaining of the coils as receivers. Phase changes are observed when the wood alloy state changes from liquid to solid. Thirdly, a series of static cold phantoms are created to represent various liquid/solid interfaces to verify the system performance. Finally, a powerful temporal reconstruction method is applied to realise real time in-situ visualisation of the solidification and the measurement of solidified shell thickness, a first report of its kind.

The effect of cooling rate on the phase formation and magnetocaloric properties in La0.6Ce0.4Fe11.0Si2.0 alloys

NASA Astrophysics Data System (ADS)

Yang, Jian; Shao, Yanyan; Feng, Zaixin; Liu, Jian

2018-04-01

In this work, the microstructure, phase formation behavior of the NaZn13-type 1:13 phase and related magnetocaloric effect have been investigated in La0.6Ce0.4Fe11.0Si2.0 as-cast bulk and melt-spun ribbons with different cooling rates. A multi-phase structure consisting of 1:13, α-Fe and La-rich phases is observed in the induction-melted sample with slow cooling. By fast cooling in the melt spinning processing, the La-rich phase can be almost eliminated and thus 1:13 phases with volume fraction as high as 74.4% directly form in the absence of further heat treatment. The resulting maximum magnetic entropy change of 3.1 J/kg K in 2 T field appears at its Curie temperature of 210 K for the La0.6Ce0.4Fe11.0Si2.0 ribbon prepared in 25 m/s.

Development of high purity large forgings for nuclear power plants

NASA Astrophysics Data System (ADS)

Tanaka, Yasuhiko; Sato, Ikuo

2011-10-01

The recent increase in the size of energy plants has been supported by the development of manufacturing technology for high purity large forgings for the key components of the plant. To assure the reliability and performance of the large forgings, refining technology to make high purity steels, casting technology for gigantic ingots, forging technology to homogenize the material and consolidate porosity are essential, together with the required heat treatment and machining technologies. To meet these needs, the double degassing method to reduce impurities, multi-pouring methods to cast the gigantic ingots, vacuum carbon deoxidization, the warm forging process and related technologies have been developed and further improved. Furthermore, melting facilities including vacuum induction melting and electro slag re-melting furnaces have been installed. By using these technologies and equipment, large forgings have been manufactured and shipped to customers. These technologies have also been applied to the manufacture of austenitic steel vessel components of the fast breeder reactors and components for fusion experiments.

Partitioning of Mg, Ca, and Na between carbonatite melt and hydrous fluid at 0.1-0.2 GPa

NASA Astrophysics Data System (ADS)

Veksler, Ilya V.; Keppler, Hans

Experimental studies of the element distribution between carbonatite melts and hydrous fluids are hampered by the fact that neither the fluid nor the melt can be isochemically quenched in conventional high-pressure vessels. In order to overcome this problem, we used a double-capsule technique to separate immiscible fluid and melt phases during and after the runs. The inner platinum capsules were charged with carbonate mixtures (CaCO3, MgCO3 and Na2CO3) and placed inside the outer capsules charged with distilled water and diamond powder. The latter was used as an inert trap for solids precipitating from the fluid on quenching. Carbonate melt and hydrous fluid equilibrated through a small hole left in the upper end of the inner capsule. The runs were performed in rapid-quench cold-seal pressure vessels at 0.1-0.2 GPa and 700-900°C in the two-phase (fluid+melt) stability region. Both quenched melt and quenched fluid were dissolved in dilute HCl and analysed by inductively coupled plasma atomic emission spectroscopy. The results show that under all conditions investigated, fluid/melt partition coefficients for Ca and Mg are similar and several times smaller than those for Na. At 0.1 GPa and a water/carbonatite ratio of 1 (by weight), the partition coefficients are DNa= 0.35+/- 0.02, DCa=0.09+/-0.02, and DMg=0.13+/- 0.01. Between 700 and 900°C, the effect of temperature on partitioning is negligible. However, DNa increases significantly with decreasing water/carbonatite ratio in the system. Our data show that the release of a hydrous fluid enriched in sodium and simultaneous crystallisation of calcite can transform an alkaline, vapour-saturated carbonatite melt into a body of pure calcite surrounded by zones of sodium metasomatism. Thus, it is quite possible that carbonate magmas with substantial amounts of alkalies were common parental liquids of plutonic carbonatites.

Global characterization of Titan's dune fields by RADAR and VIMS observations

NASA Astrophysics Data System (ADS)

garcia, A.; Rodriguez, S.; Lucas, A.; Appéré, T.; Le Gall, A.; Reffet, E.; Le Corre, L.; Le Mouélic, S.; Cornet, T.; Courrech Du Pont, S.; Narteau, C.; Bourgeois, O.; Radebaugh, J.; Arnold, K.; Barnes, J. W.; Sotin, C.; Brown, R. H.; Lorenz, R. D.; Turtle, E. P.

2013-12-01

Cassini/RADAR high-resolution images of Titan's surface revealed linear features, geomorphologically similar to longitudinal dunes. Those dunes cover a large portion of the whole surface of Titan, i.e 7.8%, and 13.4% are present on the 58.4% of the surface imaged by the RADAR/SAR from July 2004 to July 2013 (fig.1). 99.6% of the dunes are confined at the equatorial regions (30°N-30°S). Formed and sculpted by the wind, those features represent clues for the understanding of the climatic history on the satellite. By using the joint analysis between RADAR/SAR observations and the infrared VIMS mosaic corrected for atmospheric contributions acquired through July 2013 and June 2010 respectively, we found a very high degree of correlation at global scale (more than 70%) between the RADAR dunes and a specific infrared VIMS spectral unit, the 'dark brown unit'. Some RADAR dunes, less than 2%, also belong in a commonly referenced unit, the 'dark blue unit'. These two units have been delimited by defining for each a specific set of spectral criteria. We have shown that those two units present a spectral behavior different, especially at short wavelengths (below 2 μm) allowing to say that the 'dark brown unit' is dominated by organic sediment, similar to atmospheric aerosols, namely tholins, and the 'dark blue' is most likely enriched in water ice compared to the rest of Titan's surface. Given the strong correlation between RADAR dunes and the infrared 'dark brown unit' we are now able to extrapolate the total surface area of the dunes material to the total surface area of the 'dark brown unit' which correspond to 17% of the Titan's surface. This permits to estimate the volume of sediment of 360,000 km3 (total mass ≈ 290,000 GT). Thus, these estimates based on the RADAR dunes/VIMS units correlation make the dune fields the largest organic reservoir on Titan's surface and characterize more precisely the composition of the dune material over the total extend of the dune regions.

Prevalence of Clinically Isolated Metallo-beta-lactamase-producing Pseudomonas aeruginosa, Coding Genes, and Possible Risk Factors in Iran

PubMed Central

Ghasemian, Abdolmajid; Salimian Rizi, Kobra; Rajabi Vardanjani, Hassan; Nojoomi, Farshad

2018-01-01

Background & Objective: The spread of carbapenem-resistant Pseudomonas aeruginosa is a global concern. Metallo-beta-lactamase (MBL) enzymes cause extensive drug resistance among Gram-negative bacteria. The current study aimed at determining the prevalence of MBL-producing P. aeruginosa in Iran. Data extraction: A total of 43 studies were found out of which 36 were adopted. Data were collected from Google, Google Scholar, Science Direct, PubMed, Scopus, Embase, and Sciverse. The terms “Pseudomonas aeruginosa”, “metallo-beta-lactamase”, “prevalence”, “carbapenems”, and “Iran” were searched. Data from the isolates not producing MBLs were excluded from the study. Data were analyzed with Graph Pad Prism 6, meta-analysis section. Results: According to the results of the current study, 36 surveys indicated that 55% of the clinically isolated P. aeruginosa in Iran were resistant to imipenem and meropenem, among which 37.72% were the MBL producers. Among genes encoding MBLs, blaVIM and blaIMP were predominant with the prevalence of 12.91%±11.01% and 12.50%±23.56%, respectively. No report of harboring blaNDM1 and blaSPM1 by P. aeruginosa was found, similar to most of the other countries in Asia. The prevalence of blaVIM and blaIMP from burn settings were 11.50%±3.5% and 24.65%±23%, respectively. Furthermore, the prevalence of these genes was not significantly different among burn and non-burn isolates (P=0.942 and P=0.597, respectively). Moreover, no relationship was observed between the MBL production and patients’ age range. Conclusion: Approximately half of P. aeruginosa isolates were carbapenem-resistant in Iran, and approximately half were the MBL producers. The blaVIM and blaIMP were the predominant MBLs among P. aeruginosa strains, while other genes were not found in P. aeruginosa. Moreover, there was no significant difference between blaVIM and blaIMP among burn and non-burn isolates. Due to the multiple drug resistance conferred by MBLs, detection and control of their spread alongside proper therapeutic regimens in hospitals and community settings are essential to prevent infection acquisition. PMID:29731790

Prevalence of Clinically Isolated Metallo-beta-lactamase-producing Pseudomonas aeruginosa, Coding Genes, and Possible Risk Factors in Iran.

PubMed

Ghasemian, Abdolmajid; Salimian Rizi, Kobra; Rajabi Vardanjani, Hassan; Nojoomi, Farshad

2018-01-01

The spread of carbapenem-resistant Pseudomonas aeruginosa is a global concern. Metallo-beta-lactamase (MBL) enzymes cause extensive drug resistance among Gram-negative bacteria. The current study aimed at determining the prevalence of MBL-producing P. aeruginosa in Iran. A total of 43 studies were found out of which 36 were adopted. Data were collected from Google, Google Scholar, Science Direct, PubMed, Scopus, Embase, and Sciverse. The terms " Pseudomonas aeruginosa ", "metallo-beta-lactamase", "prevalence", "carbapenems", and "Iran" were searched. Data from the isolates not producing MBLs were excluded from the study. Data were analyzed with Graph Pad Prism 6, meta-analysis section. According to the results of the current study, 36 surveys indicated that 55% of the clinically isolated P. aeruginosa in Iran were resistant to imipenem and meropenem, among which 37.72% were the MBL producers. Among genes encoding MBLs, bla VIM and bla IMP were predominant with the prevalence of 12.91%±11.01% and 12.50%±23.56%, respectively. No report of harboring bla NDM1 and bla SPM1 by P. aeruginosa was found, similar to most of the other countries in Asia. The prevalence of bla VIM and bla IMP from burn settings were 11.50%±3.5% and 24.65%±23%, respectively. Furthermore, the prevalence of these genes was not significantly different among burn and non-burn isolates (P=0.942 and P=0.597, respectively). Moreover, no relationship was observed between the MBL production and patients' age range. Approximately half of P. aeruginosa isolates were carbapenem-resistant in Iran, and approximately half were the MBL producers. The bla VIM and bla IMP were the predominant MBLs among P . aeruginosa strains, while other genes were not found in P. aeruginosa . Moreover, there was no significant difference between bla VIM and bla IMP among burn and non-burn isolates. Due to the multiple drug resistance conferred by MBLs, detection and control of their spread alongside proper therapeutic regimens in hospitals and community settings are essential to prevent infection acquisition.

Computing Global Mosaics of Titan With the VIMS Imaging Spectrometer

NASA Astrophysics Data System (ADS)

Le Mouelic, S.; Cornet, T.; Rodriguez, S.; Sotin, C.; Barnes, J. W.; Brown, R. H.; Baines, K. H.; Buratti, B. J.; Clark, R. N.; Nicholson, P. D.

2015-12-01

The Visual and Infrared Mapping Spectrometer (VIMS) onboard Cassini observes the surface of Titan in seven narrow atmospheric windows in the infrared at 0.93, 1.08, 1.27, 1.59, 2.01, 2.68-2.78, and 4.9-5.1 microns. We have produced a global hyperspectral mosaic of the complete VIMS data set of Titan between T0 (July 2004) and T112 flyby (July 2015), by merging all the data cubes sorted by increasing spatial resolution, with the high resolution images on top of the mosaic and the low resolution images used as background. We filtered out the observing geometry in order to remove the pixels acquired in too extreme illuminating and viewing conditions, which systematically produce atmospheric artifacts. We used thresholds of 80° both on the incidence and emission angles, 100° on the phase angle, and 7 on the airmass. These thresholds corresponds to a trade-off between surface coverage and data quality. The viewing geometry is normalized at first order using a surface photometric function derived from the observation at 5 μm, where the atmospheric scattering is almost negligible. We also use the wings of the atmospheric windows as a proxy to correct for the amount of additive scattering present in the center of these windows, where the surface is seen by VIMS. Various color composites can then be produced using combinations of different wavelengths to emphasize surface heterogeneities. Among these, a RGB composite with red controlled by the 5 μm image, the green by the 2 μm image and the blue by the 1.27 μm, reveals the extent of equatorial dune fields appearing in brownish tones. Bluish areas corresponds to regions possibly enriched in water ice or other organic compounds. Composite of band ratios such as 1.59/1.27 μm, 2.03/1.27 μm and 1.27/1.08 also prove to be more useful to better emphasize surface variations, even if they are also more sensitive to residual artefacts due to atmospheric and geometric effects or calibration residuals.

WCK 5107 (Zidebactam) and WCK 5153 Are Novel Inhibitors of PBP2 Showing Potent “β-Lactam Enhancer” Activity against Pseudomonas aeruginosa, Including Multidrug-Resistant Metallo-β-Lactamase-Producing High-Risk Clones

PubMed Central

Barcelo, Isabel M.; Bhagwat, Sachin; Patel, Mahesh; Bou, German; Papp-Wallace, Krisztina M.; Bonomo, Robert A.; Oliver, Antonio

2017-01-01

ABSTRACT Zidebactam and WCK 5153 are novel β-lactam enhancers that are bicyclo-acyl hydrazides (BCH), derivatives of the diazabicyclooctane (DBO) scaffold, targeted for the treatment of serious infections caused by highly drug-resistant Gram-negative pathogens. In this study, we determined the penicillin-binding protein (PBP) inhibition profiles and the antimicrobial activities of zidebactam and WCK 5153 against Pseudomonas aeruginosa, including multidrug-resistant (MDR) metallo-β-lactamase (MBL)-producing high-risk clones. MIC determinations and time-kill assays were conducted for zidebactam, WCK 5153, and antipseudomonal β-lactams using wild-type PAO1, MexAB-OprM-hyperproducing (mexR), porin-deficient (oprD), and AmpC-hyperproducing (dacB) derivatives of PAO1, and MBL-expressing clinical strains ST175 (blaVIM-2) and ST111 (blaVIM-1). Furthermore, steady-state kinetics was used to assess the inhibitory potential of these compounds against the purified VIM-2 MBL. Zidebactam and WCK 5153 showed specific PBP2 inhibition and did not inhibit VIM-2 (apparent Ki [Ki app] > 100 μM). MICs for zidebactam and WCK 5153 ranged from 2 to 32 μg/ml (amdinocillin MICs > 32 μg/ml). Time-kill assays revealed bactericidal activity of zidebactam and WCK 5153. LIVE-DEAD staining further supported the bactericidal activity of both compounds, showing spheroplast formation. Fixed concentrations (4 or 8 μg/ml) of zidebactam and WCK 5153 restored susceptibility to all of the tested β-lactams for each of the P. aeruginosa mutant strains. Likewise, antipseudomonal β-lactams (CLSI breakpoints), in combination with 4 or 8 μg/ml of zidebactam or WCK 5153, resulted in enhanced killing. Certain combinations determined full bacterial eradication, even with MDR MBL-producing high-risk clones. β-Lactam–WCK enhancer combinations represent a promising β-lactam “enhancer-based” approach to treat MDR P. aeruginosa infections, bypassing the need for MBL inhibition. PMID:28289035

WCK 5107 (Zidebactam) and WCK 5153 Are Novel Inhibitors of PBP2 Showing Potent "β-Lactam Enhancer" Activity against Pseudomonas aeruginosa, Including Multidrug-Resistant Metallo-β-Lactamase-Producing High-Risk Clones.

PubMed

Moya, Bartolome; Barcelo, Isabel M; Bhagwat, Sachin; Patel, Mahesh; Bou, German; Papp-Wallace, Krisztina M; Bonomo, Robert A; Oliver, Antonio

2017-06-01

Zidebactam and WCK 5153 are novel β-lactam enhancers that are bicyclo-acyl hydrazides (BCH), derivatives of the diazabicyclooctane (DBO) scaffold, targeted for the treatment of serious infections caused by highly drug-resistant Gram-negative pathogens. In this study, we determined the penicillin-binding protein (PBP) inhibition profiles and the antimicrobial activities of zidebactam and WCK 5153 against Pseudomonas aeruginosa , including multidrug-resistant (MDR) metallo-β-lactamase (MBL)-producing high-risk clones. MIC determinations and time-kill assays were conducted for zidebactam, WCK 5153, and antipseudomonal β-lactams using wild-type PAO1, MexAB-OprM-hyperproducing ( mexR ), porin-deficient ( oprD ), and AmpC-hyperproducing ( dacB ) derivatives of PAO1, and MBL-expressing clinical strains ST175 ( bla VIM-2 ) and ST111 ( bla VIM-1 ). Furthermore, steady-state kinetics was used to assess the inhibitory potential of these compounds against the purified VIM-2 MBL. Zidebactam and WCK 5153 showed specific PBP2 inhibition and did not inhibit VIM-2 (apparent K i [ K i app ] > 100 μM). MICs for zidebactam and WCK 5153 ranged from 2 to 32 μg/ml (amdinocillin MICs > 32 μg/ml). Time-kill assays revealed bactericidal activity of zidebactam and WCK 5153. LIVE-DEAD staining further supported the bactericidal activity of both compounds, showing spheroplast formation. Fixed concentrations (4 or 8 μg/ml) of zidebactam and WCK 5153 restored susceptibility to all of the tested β-lactams for each of the P. aeruginosa mutant strains. Likewise, antipseudomonal β-lactams (CLSI breakpoints), in combination with 4 or 8 μg/ml of zidebactam or WCK 5153, resulted in enhanced killing. Certain combinations determined full bacterial eradication, even with MDR MBL-producing high-risk clones. β-Lactam-WCK enhancer combinations represent a promising β-lactam "enhancer-based" approach to treat MDR P. aeruginosa infections, bypassing the need for MBL inhibition. Copyright © 2017 American Society for Microbiology.

Formation of TbCu7-type CeFe10Zr0.8 by rapid solidification

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhou, C; Pinkerton, FE; Herbst, JF

2013-08-25

We report the discovery of a new ternary compound prepared by melt spinning induction melted ingot of nominal composition CeFe11Zr. The sample melt spun at v(s) = 25 m/s exhibits the hexagonal TbCu7-type structure of space group P6/mmm. Through fitting the experimental X-ray diffraction pattern by Rietveld method, we have successfully derived the crystal structure of the new compound melt spun at v(s) = 25 m/s to be CeFe10Zr0.8. Subsequent density function theory calculation fully supports the chemical stability of the new ternary compound. Annealing test showed that the melt spun CeFe10Zr0.8 is stable up to 700 degrees C andmore » annealing at higher temperature would cause it to decompose into hexagonal Ce2Fe17-type structure and ZrFe2. The Curie temperature measurement found that CeFe10Zr0.8 boasts a T-c = 181 degrees C, which is higher than the Tc values of all known Ce-Fe binary compounds, and 30 degrees C higher than that of Ce2Fe14B. These interesting properties stimulate continued search for new Ce-based permanent magnets that could be a cost effective solution to engineering needs in the future. (c) 2013 Elsevier B.V. All rights reserved.« less

Cassini/VIMS observes rough surfaces on Titan's Punga Mare in specular reflection.

PubMed

Barnes, Jason W; Sotin, Christophe; Soderblom, Jason M; Brown, Robert H; Hayes, Alexander G; Donelan, Mark; Rodriguez, Sebastien; Mouélic, Stéphane Le; Baines, Kevin H; McCord, Thomas B

Cassini /VIMS high-phase specular observations of Titan's north pole during the T85 flyby show evidence for isolated patches of rough liquid surface within the boundaries of the sea Punga Mare. The roughness shows typical slopes of 6°±1°. These rough areas could be either wet mudflats or a wavy sea. Because of their large areal extent, patchy geographic distribution, and uniform appearance at low phase, we prefer a waves interpretation. Applying theoretical wave calculations based on Titan conditions our slope determination allows us to infer winds of 0.76±0.09 m/s and significant wave heights of [Formula: see text] cm at the time and locations of the observation. If correct, these would represent the first waves seen on Titan's seas, and also the first extraterrestrial sea-surface waves in general.

Metallo-β-lactamase-producing Pseudomonas aeruginosa in the Netherlands: the nationwide emergence of a single sequence type.

PubMed

Van der Bij, A K; Van der Zwan, D; Peirano, G; Severin, J A; Pitout, J D D; Van Westreenen, M; Goessens, W H F

2012-09-01

Recently, the first outbreak of clonally related VIM-2 metallo-β-lactamase (MBL)-producing Pseudomonas aeruginosa in a Dutch tertiary-care centre was described. Subsequently, a nationwide surveillance study was performed in 2010-2011, which identified the presence of VIM-2 MBL-producing P. aeruginosa in 11 different hospitals. Genotyping by multiple-locus variable-number tandem-repeat analysis (MLVA) showed that the majority of the 82 MBL-producing isolates found belonged to a single MLVA type (n = 70, 85%), identified as ST111 by multilocus sequence typing (MLST). As MBL-producing isolates cause serious infections that are difficult to treat, the presence of clonally related isolates in various hospitals throughout the Netherlands is of nationwide concern. © 2012 The Authors. Clinical Microbiology and Infection © 2012 European Society of Clinical Microbiology and Infectious Diseases.

Missing data exploration: highlighting graphical presentation of missing pattern.

PubMed

Zhang, Zhongheng

2015-12-01

Functions shipped with R base can fulfill many tasks of missing data handling. However, because the data volume of electronic medical record (EMR) system is always very large, more sophisticated methods may be helpful in data management. The article focuses on missing data handling by using advanced techniques. There are three types of missing data, that is, missing completely at random (MCAR), missing at random (MAR) and not missing at random (NMAR). This classification system depends on how missing values are generated. Two packages, Multivariate Imputation by Chained Equations (MICE) and Visualization and Imputation of Missing Values (VIM), provide sophisticated functions to explore missing data pattern. In particular, the VIM package is especially helpful in visual inspection of missing data. Finally, correlation analysis provides information on the dependence of missing data on other variables. Such information is useful in subsequent imputations.

Internal epithelia in Drosophila display rudimentary competence to form cytoplasmic networks of transgenic human vimentin.

PubMed

Gullmets, Josef; Torvaldson, Elin; Lindqvist, Julia; Imanishi, Susumu Y; Taimen, Pekka; Meinander, Annika; Eriksson, John E

2017-12-01

Cytoplasmic intermediate filaments (cIFs) are found in all eumetazoans, except arthropods. To investigate the compatibility of cIFs in arthropods, we expressed human vimentin (hVim), a cIF with filament-forming capacity in vertebrate cells and tissues, transgenically in Drosophila Transgenic hVim could be recovered from whole-fly lysates by using a standard procedure for intermediate filament (IF) extraction. When this procedure was used to test for the possible presence of IF-like proteins in flies, only lamins and tropomyosin were observed in IF-enriched extracts, thereby providing biochemical reinforcement to the paradigm that arthropods lack cIFs. In Drosophila , transgenic hVim was unable to form filament networks in S2 cells and mesenchymal tissues; however, cage-like vimentin structures could be observed around the nuclei in internal epithelia, which suggests that Drosophila retains selective competence for filament formation. Taken together, our results imply that although the filament network formation competence is partially lost in Drosophila , a rudimentary filament network formation ability remains in epithelial cells. As a result of the observed selective competence for cIF assembly in Drosophila , we hypothesize that internal epithelial cIFs were the last cIFs to disappear from arthropods.-Gullmets, J., Torvaldson, E., Lindqvist, J., Imanishi, S. Y., Taimen, P., Meinander, A., Eriksson, J. E. Internal epithelia in Drosophila display rudimentary competence to form cytoplasmic networks of transgenic human vimentin. © FASEB.

Differential expression of intermediate filaments in the process of developing hepatic steatosis.

PubMed

Park, Jung-Eun; Kim, Hyun Tae; Lee, Sujin; Lee, Ye-Suk; Choi, Ung-Kyu; Kang, Jeong Han; Choi, Soo Young; Kang, Tae-Cheon; Choi, Myung-Sook; Kwon, Oh-Shin

2011-07-01

Obesity causes changes in fatty acid metabolism that consequently leads to fatty liver. To identify the possible proteins involved in the processes of obesity, we performed a proteomic analysis of obesity-induced mouse liver. Male C57BL/6J mice that were fed a high-fat diet (HFD) for 24 wk, developed hepatic steatosis characterized by considerable increase in free fatty acid (FFA) and triglyceride levels. Body weights were measured weekly and other measurements at weeks 2, 6, 12, 16, and 24. 2-D-based proteomic analysis revealed that, compared with the normal diet (ND) (n=50), high-fat diet (n=50) changed the expression of 12 protein (8 up and 4 downregulated, by a 1.5× fold change and more, p<0.05). The most pronounced difference was observed in intermediate microfilament (IF) cytoskeleton proteins. In particular, vimentin (vim) as well as cytokeratins (CK-8 and CK-18) were significantly upregulated in obese animals. Moreover, the level of caspase-generated IF fragment was also positively correlated with the degree of steatosis. The results suggest a significant alteration in IF organization during the development of hepatic steatosis leading to inflammation. The expression profile of selected proteins including vim was validated by Western blot, microarray analysis, and hepatocyte morphology by immunohistochemistry. Our results suggest that vim, like CK-18, may be a useful marker for predicting obesity and liver disease. Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Adolescent social isolation affects schizophrenia-like behavior and astrocyte biomarkers in the PFC of adult rats.

PubMed

Sun, Lan; Min, Li; Zhou, Hao; Li, Man; Shao, Feng; Wang, Weiwen

2017-08-30

Social isolation is regarded as a cause of schizophrenia spectrum disorders. Animal models of schizophrenia are constructed by repeated early environment deprivation as an important paradigm to reveal its pathological mechanism. Male Sprague Dawley rats were assigned to either social-rearing (SR) or isolated-rearing (IR) groups during postnatal days (PNDs) 21-34. On PND 56, all rats underwent behavioral testing including locomotor activity, anxiety-related behaviors in an open field and prepulse inhibition (PPI). Then, the rats were sacrificed and prefrontal cortex (PFC) tissues were separated for high-throughput proteomics analysis and Western blot validation. Rats of the IR group showed increased spontaneous locomotion, increased anxiety-like behavior and disrupted PPI compared with rats of the SR group. Based on proteomics analysis, a total of 124 PFC proteins were found to be significantly differentially expressed between the SR group and the IR group, the most remarkable of which were glial fibrillary acidic protein (GFAP), Annexin A2 (ANXA2) and vimentin (VIM), three astrocyte biomarkers. Further Western blot measurement confirmed that the levels of GFAP, ANXA2 and VIM were increased significantly in IR rats. Adolescent social isolation induced schizophrenia-like behaviors and significantly different expression of 124 PFC proteins in adult rats, especially GFAP, ANXA2 and VIM, which suggests that astrocyte development might be involved in the neural mechanism of schizophrenia. Copyright © 2017. Published by Elsevier B.V.

Investigation of yeast invertase immobilization onto cupric ion-chelated, porous, and biocompatible poly(hydroxyethyl methacrylate-n-vinyl imidazole) microspheres.

PubMed

Sari, Müfrettin Murat

2011-04-01

Cupric ion-chelated poly(hydroxyethyl methacrylate-n-vinyl imidazole) (poly(HEMA-VIM)) microspheres prepared by suspension polymerization were investigated as a specific adsorbent for immobilization of yeast invertase in a batch system. They were characterized by scanning electron microscopy, surface area, and pore size measurements. They have spherical shape and porous structure. The specific surface area of the p(HEMA-VIM) spheres was found to be 81.2 m²/g with a size range of 70-120 μm in diameter, and the swelling ratio was 86.9%. Then, Cu(II) ion chelated on the microspheres (546 μmol Cu(II)/g), and they were used in the invertase adsorption. Maximum invertase adsorption was 51.2 mg/g at pH 4.5. Cu(II) chelation increases the tendency from Freundlich-type to Langmuir-type adsorption model. The optimum activity for both free and adsorbed invertase was observed at pH 4.5. The optimum temperature for the poly(HEMA-VIM)/Cu(II)-invertase system was found to be at 55 °C, 10 °C higher than that of the free enzyme at 45 °C. V(max) values were determined as 342 and 304 U/mg enzyme, for free and adsorbed invertase, respectively. K(m) values were found to be same for free and adsorbed invertase (20 mM). Thermal and pH stability and reusability of invertase increased with immobilization.

Resistance to antibiotics in clinical isolates of Pseudomonas aeruginosa.

PubMed

Sevillano, E; Valderrey, C; Canduela, M J; Umaran, A; Calvo, F; Gallego, L

2006-01-01

To analyse the global resistance to some antibiotics used to treat nosocomial infections by Pseudomonas aeruginosa, specially to carbapenems, and its relationship with the presence of carbapenemases, OXA, VIM and IMP. The study included 229 P. aeruginosa isolates from a Hospital in Northern Spain (year 2002). Susceptibility to antimicrobial agents was determined by the analysis of the MIC. Genetic typing was carried out by RAPD-PCR fingerprinting with primer ERIC-2. Genetic experiments to detect class-1 integrons were performed by PCR with primers 5'CS and 3'CS. Detection of carbapenemases was done by phenotypic (Hodge test and DDST) and genotypic methods (PCR with primers for imp, vim1, vim2 and oxa40 genes). 23.9% of isolates were resistant to ceftazidime, 35.9% to cefotaxime, 5.3% to amikacin, 54.9% to gentamicin, 14.6% to imipenem and 6.6% to meropenem. Isolates resistant to imipenem (33) were furtherly tested. Genetic typing didn't show clonal relatedness among the most of the isolates. Class-1 integrons were present in most isolates (sizes 600-1700 bp). Phenotypic methods for carbapenemases showed 5 positive isolates. Genotypic methods showed the presence of two isolates with the oxa40 gene. Meropenem, amikacin and imipenem were the most active agents to treat infections caused by Pseudomonas aeruginosa. In our study, the presence of carbapenemase enzymes wasn't high. Phenotypic tests cannot be considered as accurate screening tool to detect carbapenemases. This is the fist report of the oxa40 gene in Pseudomonas aeruginosa isolates.

Distribution of icy particles across Enceladus' surface as derived from Cassini-VIMS measurements

USGS Publications Warehouse

Jaumann, R.; Stephan, K.; Hansen, G.B.; Clark, R.N.; Buratti, B.J.; Brown, R.H.; Baines, K.H.; Newman, S.F.; Bellucci, G.; Filacchione, G.; Coradini, A.; Cruikshank, D.P.; Griffith, C.A.; Hibbitts, C.A.; McCord, T.B.; Nelson, R.M.; Nicholson, P.D.; Sotin, Christophe; Wagner, R.

2008-01-01

The surface of Enceladus consists almost completely of water ice. As the band depths of water ice absorptions are sensitive to the size of particles, absorptions can be used to map variations of icy particles across the surface. The Visual and Infrared Mapping Spectrometer (VIMS) observed Enceladus with a high spatial resolution during three Cassini flybys in 2005 (orbits EN 003, EN 004 and EN 011). Based on these data we measured the band depths of water ice absorptions at 1.04, 1.25, 1.5, and 2 ??m. These band depths were compared to water ice models that represent theoretically calculated reflectance spectra for a range of particle diameters between 2 ??m and 1 mm. The agreement between the experimental (VIMS) and model values supports the assumption that pure water ice characterizes the surface of Enceladus and therefore that variations in band depth correspond to variations in water ice particle diameters. Our measurements show that the particle diameter of water ice increases toward younger tectonically altered surface units with the largest particles exposed in relatively "fresh" surface material. The smallest particles were generally found in old densely cratered terrains. The largest particles (???0.2 mm) are concentrated in the so called "tiger stripes" at the south pole. In general, the particle diameters are strongly correlated with geologic features and surface ages, indicating a stratigraphic evolution of the surface that is caused by cryovolcanic resurfacing and impact gardening. ?? 2007 Elsevier Inc. All rights reserved.

[Analysis of resistant genes of beta-lactam antibiotics from Pseudomonas aeruginosa in pediatric patients].

PubMed

Dong, Fang; Xu, Xi-wei; Song, Wen-qi; Lü, Ping; Yang, Yong-hong; Shen, Xu-zhuang

2008-11-18

To analyze the antibiotic resistance of the Pseudomonas aeruginosa (PA) isolated from pediatric patients and the resistant genes of beta-lactam antibiotics thereof. 146 PA strains were isolated from pediatric patients. Agar dilution method recommended by the Clinical and Laboratory Standards Institute was used to examine the minimum inhibitory concentrations (MICs) of 12 antimicrobial agents, including the penicillins, third and fourth genet ration cephalosporins, carbapenemase, Aztreonam, beta-lactamase inhibitors, quinolones, and aminoglycosides. PCR was used to detect the expression of the genes TEM, SHV, OXA, PER, GES, CTX-M, IMP, VIM, DHA, MIR, FOX, and oprD2. The multi-drug resistance rates against different antibiotic were high among the 146 PA strains. The rates of imipenem and meropenem resistance were 41.1% and 35.6% respectively. Among the 146 PA strains, 46 (31.5%) were positive for the MBL genotype; 38 (82.6%) carried the blaIMP gene, 8 (17.4%) carried the blaVIM gene, and 114 (78.1%) were oprD2 negative. The genes TEM, SHV, OXA, CTX-M, PER, VEB, GES, FOX, MIR, and DHA were not found in all strains. Many PA isolated from pediatric patients carry the genes IMP or VIM and losses oprD2 gene related to the expression of the outer membrane porin OprD2. The loss of the gene oprD2 is essential mechanism of beta-lactam antibiotics resistance in PA.

Probing Saturn's tropospheric cloud with Cassini/VIMS

NASA Astrophysics Data System (ADS)

Barstow, J. K.; Irwin, P. G. J.; Fletcher, L. N.; Giles, R. S.; Merlet, C.

2016-06-01

In its decade of operation the Cassini mission has allowed us to look deep into Saturn's atmosphere and investigate the processes occurring below its enshrouding haze. We use Visual and Infrared Mapping Spectrometer (VIMS) 4.6-5.2 μm data from early in the mission to investigate the location and properties of Saturn's cloud structure between 0.6 and 5 bar. We average nightside spectra from 2006 over latitude circles and model the spectral limb darkening using the NEMESIS radiative transfer and retrieval tool. We present our best-fit deep cloud model for latitudes -40∘ < λ <50∘ , along with retrieved abundances for NH3, PH3 and AsH3. We find an increase in NH3 abundance at the equator, a cloud base at ∼2.3 bar and no evidence for cloud particles with strong absorption features in the 4.6-5.2 μm wavelength range, all of which are consistent with previous work. Non-scattering cloud models assuming a composition of either NH3 or NH4SH, with a scattering haze overlying, fit limb darkening curves and spectra at all latitudes well; the retrieved optical depth for the tropospheric haze is decreased in the northern (winter) hemisphere, implying that the haze has a photochemical origin. Our ability to test this hypothesis by examining spectra at different seasons is restricted by the varying geometry of VIMS observations over the life of the mission, and the appearance of the Saturn storm towards the end of 2010.

In vitro antibacterial activity of rifampicin in combination with imipenem, meropenem and doripenem against multidrug-resistant clinical isolates of Pseudomonas aeruginosa.

PubMed

Hu, Yi-Fan; Liu, Chang-Pan; Wang, Nai-Yu; Shih, Shou-Chuan

2016-08-24

Multidrug-resistant Pseudomonas aeruginosa has emerged as one of the most important healthcare-associated pathogens. Colistin is regarded as the last-resort antibiotic for multidrug-resistant Gram-negative bacteria, but is associated with high rates of acute kidney injury. The aim of this in vitro study is to search for an alternative treatment to colistin for multidrug-resistant P. aeruginosa infections. Multidrug and carbapenem-resistant P. aeruginosa isolates were collected between January 2009 and December 2012 at MacKay Memorial Hospital. Minimal inhibitory concentrations (MICs) were determined for various antibiotic combinations. Carbapenemase-producing genes including bla VIM, other β-lactamase genes and porin mutations were screened by PCR and sequencing. The efficacy of carbapenems (imipenem, meropenem, doripenem) with or without rifampicin was correlated with the type of porin mutation (frameshift mutation, premature stop codon mutation) in multidrug-resistant P. aeruginosa isolates without carbapenemase-producing genes. Of the 71 multidrug-resistant clinical P. aeruginosa isolates, only six harboured the bla VIM gene. Imipenem, meropenem and doripenem were significantly more effective (reduced fold-change of MICs) when combined with rifampicin in bla VIM-negative isolates, especially in isolates with porin frameshift mutation. Imipenem + rifampicin combination has a low MIC against multidrug-resistant P. aeruginosa, especially in isolates with porin frameshift mutation. The imipenem + rifampicin combination may provide an alternative treatment to colistin for multidrug -resistant P. aeruginosa infections, especially for patients with renal insufficiency.

Gait and Balance in Essential Tremor: Variable Effects of Bilateral Thalamic Stimulation

PubMed Central

Earhart, Gammon M.; Clark, B. Ruth; Tabbal, Samer D.; Perlmutter, Joel S.

2010-01-01

Essential tremor (ET) is a multi-faceted condition best known for postural and action tremor but also may include disordered gait and postural instability. Deep brain stimulation (DBS) of the ventral intermediate nucleus (VIM) of the thalamus provides substantial tremor reduction yet some patients with bilateral VIM DBS have gait and balance impairment. This study examines gait and balance performance in 13 participants with ET who have bilateral VIM DBS compared to a matched control group. Participants with ET were tested with their stimulators off (DBS OFF) and on (DBS ON). For both standard and tandem walking, participants with ET walked significantly more slowly than controls, with significantly lower cadence, spending a lower percentage of the gait cycle in single limb support and a higher percentage in double support compared to controls. Participants with ET also had significantly lower tandem and one leg stance times, Berg balance scores, balance confidence, and required significantly greater time to perform the Timed Up-and-Go relative to controls. There were no significant differences in any gait or balance measures in the DBS OFF versus DBS ON conditions, but the effects of DBS on gait and balance were highly variable among individuals. Future studies are needed to determine why some individuals experience gait and balance difficulties after bilateral thalamic DBS and others do not. A better understanding of the mechanisms underlying gait and balance impairments in those with bilateral DBS is critical in order to reduce falls and fractures in this group. PMID:19006189

Structure of metal-oxide Ti-Ta-(Ti,Ta)xOy coatings during spark alloying and induction-thermal oxidation

NASA Astrophysics Data System (ADS)

Koshuro, V.; Fomin, A.; Fomina, M.; Rodionov, I.; Brzhozovskii, B.; Martynov, V.; Zakharevich, A.; Aman, A.; Oseev, A.; Majcherek, S.; Hirsch, S.

2016-08-01

The study focuses on combined spark alloying of titanium and titanium alloy surface and porous matrix structure oxidation. The metal-oxide coatings morphology is the result of melt drop transfer, heat treatment, and oxidation. The study establishes the influence of technological regimes of alloying and oxidation on morphological heterogeneity of metal- oxide system Ti-Ta-(Ti,Ta)xOy.

Scientific Articles on Magnetic Materials and Applications Research from 2006 - 2014

DTIC Science & Technology

2015-03-01

had coercivities less than 0.4 Oe and saturation inductions greater than 1Tesla. The electrical resistivities of the amorphous ribbons were all...S. Liu, S. Y. Chu, J. C. Horwath and R. T. Fingers, "Effects of Zr , Nb , and Cu substitutions on magnetic properties of melt-spun and hot deformed...DISTRIBUTION STATEMENT. *//Signature// //Signature// JOHN C. HORWATH THOMAS L. REITZ, Technical Advisor Electrical Engineer Mechanical

The automated system for technological process of spacecraft's waveguide paths soldering

NASA Astrophysics Data System (ADS)

Tynchenko, V. S.; Murygin, A. V.; Emilova, O. A.; Bocharov, A. N.; Laptenok, V. D.

2016-11-01

The paper solves the problem of automated process control of space vehicles waveguide paths soldering by means of induction heating. The peculiarities of the induction soldering process are analyzed and necessity of information-control system automation is identified. The developed automated system makes the control of the product heating process, by varying the power supplied to the inductor, on the basis of information about the soldering zone temperature, and stabilizing the temperature in a narrow range above the melting point of the solder but below the melting point of the waveguide. This allows the soldering process automating to improve the quality of the waveguides and eliminate burn-troughs. The article shows a block diagram of a software system consisting of five modules, and describes the main algorithm of its work. Also there is a description of the waveguide paths automated soldering system operation, for explaining the basic functions and limitations of the system. The developed software allows setting of the measurement equipment, setting and changing parameters of the soldering process, as well as view graphs of temperatures recorded by the system. There is shown the results of experimental studies that prove high quality of soldering process control and the system applicability to the tasks of automation.

Vitrified metal finishing wastes I. Composition, density and chemical durability.

PubMed

Bingham, P A; Hand, R J

2005-03-17

Durable phosphate glasses were formed by vitrifying waste filter cakes from two metal finishing operations. Some melts formed crystalline components during cooling. Compositional analysis of dried, heat treated and vitrified samples was made using energy-dispersive X-ray spectroscopy, X-ray fluorescence spectroscopy, inductively-coupled plasma spectroscopy and Leco induction furnace combustion analysis. Hydrolytic dissolution, measured by an adapted product consistency test, was reduced by up to 3 orders of magnitude upon heat treatment or vitrification, surpassing the performance of borosilicate glass in some cases. This was attributed to the high levels of iron and zinc in the wastes, which greatly improve the durability of phosphate glasses. One of the wastes arose from a metal phosphating process and was particularly suitable for vitrification due to its high P2O5 content and favourable melting behaviour. The other waste, which arose from a number of processes, was less suitable as it had a low P2O5 content and during heating it emitted harmful corrosive gases and underwent violent reactions. Substantial volume reductions were obtained by heat treatment and vitrification of both wastes. Compositions and performances of some vitrified wastes were comparable with those of glasses which are under consideration for the immobilisation of toxic and nuclear wastes.

A close look at Saturn's rings with Cassini VIMS

USGS Publications Warehouse

Nicholson, P.D.; Hedman, M.M.; Clark, R.N.; Showalter, M.R.; Cruikshank, D.P.; Cuzzi, J.N.; Filacchione, G.; Capaccioni, F.; Cerroni, P.; Hansen, G.B.; Sicardy, B.; Drossart, P.; Brown, R.H.; Buratti, B.J.; Baines, K.H.; Coradini, A.

2008-01-01

Soon after the Cassini-Huygens spacecraft entered orbit about Saturn on 1 July 2004, its Visual and Infrared Mapping Spectrometer obtained two continuous spectral scans across the rings, covering the wavelength range 0.35-5.1 ??m, at a spatial resolution of 15-25 km. The first scan covers the outer C and inner B rings, while the second covers the Cassini Division and the entire A ring. Comparisons of the VIMS radial reflectance profile at 1.08 ??m with similar profiles at a wavelength of 0.45 ??m assembled from Voyager images show very little change in ring structure over the intervening 24 years, with the exception of a few features already known to be noncircular. A model for single-scattering by a classical, many-particle-thick slab of material with normal optical depths derived from the Voyager photopolarimeter stellar occultation is found to provide an excellent fit to the observed VIMS reflectance profiles for the C ring and Cassini Division, and an acceptable fit for the inner B ring. The A ring deviates significantly from such a model, consistent with previous suggestions that this region may be closer to a monolayer. An additional complication here is the azimuthally-variable average optical depth associated with "self-gravity wakes" in this region and the fact that much of the A ring may be a mixture of almost opaque wakes and relatively transparent interwake zones. Consistently with previous studies, we find that the near-infrared spectra of all main ring regions are dominated by water ice, with a typical regolith grain radius of 5-20 ??m, while the steep decrease in visual reflectance shortward of 0.6 ??m is suggestive of an organic contaminant, perhaps tholin-like. Although no materials other than H2O ice have been identified with any certainty in the VIMS spectra of the rings, significant radial variations are seen in the strength of the water-ice absorption bands. Across the boundary between the C and B rings, over a radial range of ???7000 km, the near-IR band depths strengthen considerably. A very similar pattern is seen across the outer half of the Cassini Division and into the inner A ring, accompanied by a steepening of the red slope in the visible spectrum shortward of 0.55 ??m. We attribute these trends-as well as smaller-scale variations associated with strong density waves in the A ring-to differing grain sizes in the tholin-contaminated icy regolith that covers the surfaces of the decimeter-to-meter sized ring particles. On the largest scale, the spectral variations seen by VIMS suggest that the rings may be divided into two larger 'ring complexes,' with similar internal variations in structure, optical depth, particle size, regolith texture and composition. The inner complex comprises the C and B rings, while the outer comprises the Cassini Division and A ring. ?? 2007 Elsevier Inc. All rights reserved.

Additive Manufacturing of Patient-Customizable Scaffolds for Tubular Tissues Using the Melt-Drawing Method.

PubMed

Tan, Yu Jun; Tan, Xipeng; Yeong, Wai Yee; Tor, Shu Beng

2016-11-03

Polymeric fibrous scaffolds for guiding cell growth are designed to be potentially used for the tissue engineering (TE) of tubular organs including esophagi, blood vessels, tracheas, etc. Tubular scaffolds were fabricated via melt-drawing of highly elastic poly(l-lactide-co-ε-caprolactone) (PLC) fibers layer-by-layer on a cylindrical mandrel. The diameter and length of the scaffolds are customizable via 3D printing of the mandrel. Thickness of the scaffolds was varied by changing the number of layers of the melt-drawing process. The morphology and tensile properties of the PLC fibers were investigated. The fibers were highly aligned with a uniform diameter. Their diameters and tensile properties were tunable by varying the melt-drawing speeds. These tailorable topographies and tensile properties show that the additive-based scaffold fabrication technique is customizable at the micro- and macro-scale for different tubular tissues. The merits of these scaffolds in TE were further shown by the finding that myoblast and fibroblast cells seeded onto the scaffolds in vitro showed appropriate cell proliferation and distribution. Human mesenchymal stem cells (hMSCs) differentiated to smooth muscle lineage on the microfibrous scaffolds in the absence of soluble induction factors, showing cellular shape modulation and scaffold elasticity may encourage the myogenic differentiation of stem cells.

Human Mitochondrial Transcription Factor B2 Is Required for Promoter Melting during Initiation of Transcription.

PubMed

Posse, Viktor; Gustafsson, Claes M

2017-02-17

The mitochondrial transcription initiation machinery in humans consists of three proteins: the RNA polymerase (POLRMT) and two accessory factors, transcription factors A and B2 (TFAM and TFB2M, respectively). This machinery is required for the expression of mitochondrial DNA and the biogenesis of the oxidative phosphorylation system. Previous experiments suggested that TFB2M is required for promoter melting, but conclusive experimental proof for this effect has not been presented. Moreover, the role of TFB2M in promoter unwinding has not been discriminated from that of TFAM. Here we used potassium permanganate footprinting, DNase I footprinting, and in vitro transcription from the mitochondrial light-strand promoter to study the role of TFB2M in transcription initiation. We demonstrate that a complex composed of TFAM and POLRMT was readily formed at the promoter but alone was insufficient for promoter melting, which only occurred when TFB2M joined the complex. We also show that mismatch bubble templates could circumvent the requirement of TFB2M, but TFAM was still required for efficient initiation. Our findings support a model in which TFAM first recruits POLRMT to the promoter, followed by TFB2M binding and induction of promoter melting. © 2017 by The American Society for Biochemistry and Molecular Biology, Inc.

Missing data exploration: highlighting graphical presentation of missing pattern

PubMed Central

2015-01-01

Functions shipped with R base can fulfill many tasks of missing data handling. However, because the data volume of electronic medical record (EMR) system is always very large, more sophisticated methods may be helpful in data management. The article focuses on missing data handling by using advanced techniques. There are three types of missing data, that is, missing completely at random (MCAR), missing at random (MAR) and not missing at random (NMAR). This classification system depends on how missing values are generated. Two packages, Multivariate Imputation by Chained Equations (MICE) and Visualization and Imputation of Missing Values (VIM), provide sophisticated functions to explore missing data pattern. In particular, the VIM package is especially helpful in visual inspection of missing data. Finally, correlation analysis provides information on the dependence of missing data on other variables. Such information is useful in subsequent imputations. PMID:26807411

Specular reflection on Titan: Liquids in Kraken Mare

USGS Publications Warehouse

Stephan, Katrin; Jaumann, Ralf; Brown, Robert H.; Soderblom, Jason M.; Soderblom, Laurence A.; Barnes, Jason W.; Sotin, Christophe; Griffith, Caitlin A.; Kirk, Randolph L.; Baines, Kevin H.; Buratti, Bonnie J.; Clark, Roger N.; Lytle, Dyer M.; Nelson, Robert M.; Nicholson, Phillip D.

2010-01-01

After more than 50 close flybys of Titan by the Cassini spacecraft, it has become evident that features similar in morphology to terrestrial lakes and seas exist in Titan's polar regions. As Titan progresses into northern spring, the much more numerous and larger lakes and seas in the north-polar region suggested by Cassini RADAR data, are becoming directly illuminated for the first time since the arrival of the Cassini spacecraft. This allows the Cassini optical instruments to search for specular reflections to provide further confirmation that liquids are present in these evident lakes. On July 8, 2009 Cassini VIMS detected a specular reflection in the north-polar region of Titan associated with Kraken Mare, one of Titan's large, presumed seas, indicating the lake's surface is smooth and free of scatterers with respect to the wavelength of 5 μm, where VIMS detected the specular signal, strongly suggesting it is liquid.

EMT and EGFR in CTCs cytokeratin negative non-metastatic breast cancer

PubMed Central

Alvarez-Cubero, Maria J.; Nadal, Rosa; Sanchez-Rovira, Pedro; Salido, Marta; Rodríguez, María; García-Puche, Jose L.; Delgado-Rodriguez, Miguel; Solé, Francisco; García, Maria A.; Perán, Macarena; Rosell, Rafael; Marchal, Juan A.; Lorente, Jose A.

2014-01-01

Circulating tumor cells (CTCs) are frequently associated with epithelialmesenchymal transition (EMT). The objective of this study was to detect EMT phenotype through Vimentin (VIM) and Slug expression in cytokeratin (CK)-negative CTCs in non-metastatic breast cancer patients and to determine the importance of EGFR in the EMT phenomenon. In CK-negative CTCs samples, both VIM and Slug markers were co-expressed in the most of patients. Among patients EGFR+, half of them were positive for these EMT markers. Furthermore, after a systemic treatment 68% of patients switched from CK- to CK+ CTCs. In our experimental model we found that activation of EGFR signaling by its ligand on MCF-7 cells is sufficient to increase EMT phenotypes, to inhibit apoptotic events and to induce the loss of CK expression. The simultaneous detection of both EGFR and EMT markers in CTCs may improve prognostic or predictive information in patients with operable breast cancer. PMID:25277187

Reduction of vortex induced forces and motion through surface roughness control

DOEpatents

Bernitsas, Michael M; Raghavan, Kamaldev

2014-04-01

Roughness is added to the surface of a bluff body in a relative motion with respect to a fluid. The amount, size, and distribution of roughness on the body surface is controlled passively or actively to modify the flow around the body and subsequently the Vortex Induced Forces and Motion (VIFM). The added roughness, when designed and implemented appropriately, affects in a predetermined way the boundary layer, the separation of the boundary layer, the level of turbulence, the wake, the drag and lift forces, and consequently the Vortex Induced Motion (VIM), and the fluid-structure interaction. The goal of surface roughness control is to decrease/suppress Vortex Induced Forces and Motion. Suppression is required when fluid-structure interaction becomes destructive as in VIM of flexible cylinders or rigid cylinders on elastic support, such as underwater pipelines, marine risers, tubes in heat exchangers, nuclear fuel rods, cooling towers, SPAR offshore platforms.

Photometric changes on Saturn's Titan: Evidence for active cryovolcanism

USGS Publications Warehouse

Nelson, R.M.; Kamp, L.W.; Lopes, R.M.C.; Matson, D.L.; Kirk, R.L.; Hapke, B.W.; Wall, S.D.; Boryta, M.D.; Leader, F.E.; Smythe, W.D.; Mitchell, K.L.; Baines, K.H.; Jaumann, R.; Sotin, Christophe; Clark, R.N.; Cruikshank, D.P.; Drossart, P.; Lunine, J.I.; Combes, M.; Bellucci, G.; Bibring, J.-P.; Capaccioni, F.; Cerroni, P.; Coradini, A.; Formisano, V.; Filacchione, G.; Langevin, Y.; McCord, T.B.; Mennella, V.; Nicholson, P.D.; Sicardy, B.; Irwin, P.G.J.; Pearl, J.C.

2009-01-01

We report infrared spectrophotometric variability on the surface of Saturn's moon Titan detected in images returned by the Visual and Infrared Mapping Spectrometer (VIMS) onboard the Cassini Saturn Orbiter. The changes were observed at 7??S, 138??W and occurred between October 27, 2005 and January 15, 2006. After that date the surface was unchanged until the most recent observation, March 18, 2006. We previously reported spectrophotometric variability at another location (26??S, 78??W). Cassini Synthetic Aperture RADAR (SAR) images find that the surface morphology at both locations is consistent with surface flows possibly resulting from cryovolcanic activity (Wall et al., companion paper, this issue). The VIMS-reported time variability and SAR morphology results suggest that Titan currently exhibits intermittent surface changes consistent with present ongoing surface processes. We suggest that these processes involve material from Titan's interior being extruded or effiised and deposited on the surface, as might be expected from cryovolcanism. ?? 2009.

Improvement in antiproliferative activity of Angelica gigas Nakai by solid dispersion formation via hot-melt extrusion and induction of cell cycle arrest and apoptosis in HeLa cells.

PubMed

Jiang, Yunyao; Piao, Jingpei; Cho, Hyun-Jong; Kang, Wie-Soo; Kim, Hye-Young

2015-01-01

Angelica gigas Nakai (AGN) is one of the most popular herbal medicines and widely used as a functional food product. In this study, AGN was firstly processed by a low-temperature turbo mill and a hot melting extruder to reduce particle size and form solid dispersion (SD). Anticancer activity against HeLa cells was then examined. AGN-SD based on Soluplus was formed via hot-melt extrusion (HME) and showed the strongest cytotoxic effect on HeLa cells. In addition, the possible mechanism of cell death induced by AGN-SD on HeLa cells was also investigated. AGN-SD decreased cell viability, induced apoptosis, increased the production of reactive oxygen species, regulated the expression of Bcl-2 and Bax, and induced G2/M phase arrest in HeLa cells. This study suggested that AGN-SD based on Soluplus and the method to improve antiproliferative effect by SD formation via HME may be suitable for application in the pharmaceutical industry.

Cassini/VIMS hyperspectral observations of the HUYGENS landing site on Titan

USGS Publications Warehouse

Rodriguez, S.; Le, Mouelic S.; Sotin, Christophe; Clenet, H.; Clark, R.N.; Buratti, B.; Brown, R.H.; McCord, T.B.; Nicholson, P.D.; Baines, K.H.

2006-01-01

Titan is one of the primary scientific objectives of the NASA-ESA-ASI Cassini-Huygens mission. Scattering by haze particles in Titan's atmosphere and numerous methane absorptions dramatically veil Titan's surface in the visible range, though it can be studied more easily in some narrow infrared windows. The Visual and Infrared Mapping Spectrometer (VIMS) instrument onboard the Cassini spacecraft successfully imaged its surface in the atmospheric windows, taking hyperspectral images in the range 0.4-5.2 ??m. On 26 October (TA flyby) and 13 December 2004 (TB flyby), the Cassini-Huygens mission flew over Titan at an altitude lower than 1200 km at closest approach. We report here on the analysis of VIMS images of the Huygens landing site acquired at TA and TB, with a spatial resolution ranging from 16 to14.4 km/pixel. The pure atmospheric backscattering component is corrected by using both an empirical method and a first-order theoretical model. Both approaches provide consistent results. After the removal of scattering, ratio images reveal subtle surface heterogeneities. A particularly contrasted structure appears in ratio images involving the 1.59 and 2.03 ??m images north of the Huygens landing site. Although pure water ice cannot be the only component exposed at Titan's surface, this area is consistent with a local enrichment in exposed water ice and seems to be consistent with DISR/Huygens images and spectra interpretations. The images show also a morphological structure that can be interpreted as a 150 km diameter impact crater with a central peak. ?? 2006 Elsevier Ltd. All rights reserved.

Promoting epithelial-to-mesenchymal transition by D-kynurenine via activating aryl hydrocarbon receptor.

PubMed

Duan, Zhiqing; Li, Yan; Li, Lu

2018-02-13

Epithelial-to-mesenchymal transition (EMT) is believed to play key roles in the process of cancer metastasis. The molecular changes during EMT are characterized by the down-regulation of epithelial proteins, such as E-cadherin, and the up-regulation of mesenchymal proteins, such as vimentin (VIM). It has been demonstrated that L-kynurenine (L-Kyn), a physiological ligand of Aryl hydrocarbon receptor (Ahr), promotes cancer cells to metastasize. However, the effects of D-enantiomer of kynurenine, D-kynurenine (D-Kyn), on metastasis are still unclear. In the present paper, we firstly confirmed that D-Kyn (10, 40, 60, and 100 µM) positively regulated the metastasis of 95D cells, a lung cancer cell line, which was reduced upon siRNA Ahr treatment. Moreover, significant enhancement VIM expression was detected in the presence of D-Kyn (10 and 40 µM). In contrast, 10 µM D-Kyn markedly attenuated E-cadherin level. Additionally, 10 µM D-Kyn-mediated changes of VIM and E-cadherin were substantially attenuated on siRNA Ahr treatment as well. Most importantly, the evidences-10/40 µM D-Kyn-induced up-regulation of CYP1A1, 10 µM D-Kyn-induced increase of nuclear transfer of Ahr, and 10/40/60/100 µM D-Kyn-induced enhancement of DER-luciferase activity-indicated that D-Kyn was capable of activating Ahr in fact. These results suggest that D-Kyn increases lung cancer cells to metastasize by activating Ahr.

Molecular detection of metallo-β-lactamase genes, bla IMP-1, bla VIM-2 and bla SPM-1 in imipenem resistant Pseudomonas aeruginosa isolated from clinical specimens in teaching hospitals of Ahvaz, Iran.

PubMed

Moosavian, Mojtaba; Rahimzadeh, Mohammad

2015-02-01

Carbapenem resistant Pseudomonas aeruginosa is a serious cause of nosocomial infections. The main purpose of the study is to determine the prevalence rate of imipenem resistant Pseudomonas aeruginosa carrying metallo-ß-lactamase (MBL) genes. 236 Pseudomonas aeruginosa isolates were collected from teaching hospitals of Ahvaz University of Medical Sciences during a period of 9 months in 2012. These strains were identified using conventional microbiological tests. The susceptibility of isolates to antibiotics were assessed using disk diffusion test. The IMP-EDTA combination disk phenotypic test was performed for detection of MBL producing strains. Finally, polymerase chain reaction (PCR) was performed to detect MBL genes, bla IMP-1, bla VIM-2 and bla SPM-1 in imipenem resistant strains. Out of 236 examined isolates, 122 isolates (51.4%) were resistant to imipenem. The IMP-EDTA combination test showed that among 122 imipenem resistant strains, 110 strains (90%) were phenotipically MBL producers. Additionally, the results of PCR method showed that 2 strains (1.6%) and 67strains (55%) of imipenem resistant Pseudomonas aeruginosa isolates contained bla VIM-2 and bla IMP-1 genes respectively. No SPM-1gene was found in the examined samples. Resistance of P. aeruginosa isolates to imipenem due to MBL enzymes is increasing in Ahavaz. Because of clinical significance of this kind of resistance, rapid detection of MBL producing strains and followed by appropriate treatment is necessary to prevent the spreading of these organisms.

Subcortical neuronal ensembles: an analysis of motor task association, tremor, oscillations, and synchrony in human patients.

PubMed

Hanson, Timothy L; Fuller, Andrew M; Lebedev, Mikhail A; Turner, Dennis A; Nicolelis, Miguel A L

2012-06-20

Deep brain stimulation (DBS) has expanded as an effective treatment for motor disorders, providing a valuable opportunity for intraoperative recording of the spiking activity of subcortical neurons. The properties of these neurons and their potential utility in neuroprosthetic applications are not completely understood. During DBS surgeries in 25 human patients with either essential tremor or Parkinson's disease, we acutely recorded the single-unit activity of 274 ventral intermediate/ventral oralis posterior motor thalamus (Vim/Vop) neurons and 123 subthalamic nucleus (STN) neurons. These subcortical neuronal ensembles (up to 23 neurons sampled simultaneously) were recorded while the patients performed a target-tracking motor task using a cursor controlled by a haptic glove. We observed that modulations in firing rate of a substantial number of neurons in both Vim/Vop and STN represented target onset, movement onset/direction, and hand tremor. Neurons in both areas exhibited rhythmic oscillations and pairwise synchrony. Notably, all tremor-associated neurons exhibited synchrony within the ensemble. The data further indicate that oscillatory (likely pathological) neurons and behaviorally tuned neurons are not distinct but rather form overlapping sets. Whereas previous studies have reported a linear relationship between power spectra of neuronal oscillations and hand tremor, we report a nonlinear relationship suggestive of complex encoding schemes. Even in the presence of this pathological activity, linear models were able to extract motor parameters from ensemble discharges. Based on these findings, we propose that chronic multielectrode recordings from Vim/Vop and STN could prove useful for further studying, monitoring, and even treating motor disorders.

Identifying DNA Methylation Biomarkers for Non-Endoscopic Detection of Barrett’s Esophagus

PubMed Central

Moinova, Helen R.; LaFramboise, Thomas; Lutterbaugh, James D.; Chandar, Apoorva Krishna; Dumot, John; Faulx, Ashley; Brock, Wendy; De la Cruz Cabrera, Omar; Guda, Kishore; Barnholtz-Sloan, Jill S.; Iyer, Prasad G.; Canto, Marcia I.; Wang, Jean S.; Shaheen, Nicholas J.; Thota, Prashanti N.; Willis, Joseph E.; Chak, Amitabh; Markowitz, Sanford D.

2018-01-01

We report a biomarker-based non-endoscopic method for detecting Barrett’s esophagus (BE), based on detecting methylated DNAs retrieved via a swallowable balloon-based esophageal sampling device. BE is the precursor of, and a major recognized risk factor for, developing esophageal adenocarcinoma (EAC). Endoscopy, the current standard for BE detection, is not cost-effective for population screening. We performed genome-wide screening to ascertain regions targeted for recurrent aberrant cytosine methylation in BE, identifying high-frequency methylation within the CCNA1 locus. We tested CCNA1 DNA methylation as a BE biomarker in cytology brushings of the distal esophagus from 173 individuals with or without BE. CCNA1 DNA methylation demonstrated an area under the curve (AUC)=0.95 for discriminating BE-related metaplasia and neoplasia cases versus normal individuals, performing identically to methylation of VIM DNA, an established BE biomarker. When combined, the resulting two biomarker panel was 95% sensitive and 91% specific. These results were replicated in an independent validation cohort of 149 individuals, who were assayed using the same cutoff values for test positivity established in the training population. To progress toward non-endoscopic esophageal screening, we engineered a well-tolerated, swallowable, encapsulated balloon device able to selectively sample the distal esophagus within 5 minutes. In balloon samples from 86 individuals, tests of CCNA1 plus VIM DNA methylation detected BE metaplasia with 90.3% sensitivity and 91.7% specificity. Combining the balloon sampling device with molecular assays of CCNA1 plus VIM DNA methylation enables an efficient, well-tolerated, sensitive, and specific method of screening at-risk populations for BE. PMID:29343623

The Distribution of Submersed Aquatic Vegetation in the Fresh and Oligohaline Tidal Potomac River, 2004

USGS Publications Warehouse

Rybicki, Nancy B.; Yoon, Sarah N.; Schenk, Edward R.; Baldizar, Julie B.

2007-01-01

Introduction Submersed aquatic vegetation (SAV) is a critical component of the Potomac River ecosystem. Though SAV provides important habitat for fauna and stabilizes bottom sediment, very dense beds may restrict recreational and commercial navigation. Exotic species of SAV are managed by the Metropolitan Washington Council of Governments Potomac Aquatic Plant Management Program (PAPMP). Selected beds of exotic SAV species that limit navigation are harvested mechanically. The program began in 1986 when approximately 40 acres of plants were harvested from 18 sites (Metropolitan Washington Council of Governments 1987). Monitoring efforts are an effective means of quantifying the distribution and abundance of the exotic species, Hydrilla verticillata (hydrilla) and other SAV species. These annual surveys provide a basis for identifying large-scale changes throughout the ecosystem and allow managers to evaluate the effectiveness of resource management policies based on a reliable scientific foundation. The U.S. Geological Survey (USGS) has monitored the distribution and composition of SAV beds in the fresh and oligohaline (salinity 0.5 to 5) tidal Potomac River since 1978 using transect sampling (1978 to 1981, 1985 to 1987, and 2002) and shoreline surveys (1983 to 2004). Shoreline survey data from the tidal Potomac River are incorporated into the Virginia Institute of Marine Science (VIMS) annual report on SAV distribution in Chesapeake Bay. The VIMS report and methods are available at http://www.vims.edu/bio/sav. Additional publications concerning SAV distribution in the Potomac River can be found at http://water.usgs.gov/nrp/proj.bib/sav/wethome.htm.

Spectroscopy, morphometry, and photoclinometry of Titan's dunefields from Cassini/VIMS

USGS Publications Warehouse

Barnes, J.W.; Brown, R.H.; Soderblom, L.; Sotin, Christophe; Le, Mouelic S.; Rodriguez, S.; Jaumann, R.; Beyer, R.A.; Buratti, B.J.; Pitman, K.; Baines, K.H.; Clark, R.; Nicholson, P.

2008-01-01

Fine-resolution (500 m/pixel) Cassini Visual and Infrared Mapping Spectrometer (VIMS) T20 observations of Titan resolve that moon's sand dunes. The spectral variability in some dune regions shows that there are sand-free interdune areas, wherein VIMS spectra reveal the exposed dune substrate. The interdunes from T20 are, variously, materials that correspond to the equatorial bright, 5-??m-bright, and dark blue spectral units. Our observations show that an enigmatic "dark red" spectral unit seen in T5 in fact represents a macroscopic mixture with 5-??m-bright material and dunes as its spectral endmembers. Looking more broadly, similar mixtures of varying amounts of dune and interdune units of varying composition can explain the spectral and albedo variability within the dark brown dune global spectral unit that is associated with dunes. The presence of interdunes indicates that Titan's dunefields are both mature and recently active. The spectrum of the dune endmember reveals the sand to be composed of less water ice than the rest of Titan; various organics are consistent with the dunes' measured reflectivity. We measure a mean dune spacing of 2.1 km, and find that the dunes are oriented on the average in an east-west direction, but angling up to 10?? from parallel to the equator in specific cases. Where no interdunes are present, we determine the height of one set of dunes photoclinometrically to be between 30 and 70 m. These results pave the way for future exploration and interpretation of Titan's sand dunes. ?? 2007 Elsevier Inc. All rights reserved.

Deep brain stimulation for Parkinson's disease: recent trends and future direction.

PubMed

Fukaya, Chikashi; Yamamoto, Takamitsu

2015-01-01

To date, deep brain stimulation (DBS) has already been performed on more than 120,000 patients worldwide and in more than 7,000 patients in Japan. However, fundamental understanding of DBS effects on the pathological neural circuitry remains insufficient. Recent studies have specifically shown the importance of cortico-striato-thalamo-cortical (CSTC) loops, which were identified as functionally and anatomically discrete units. Three main circuits exist in the CSTC loops, namely, the motor, associative, and limbic circuits. From these theoretical backgrounds, it is determined that DBS sometimes influences not only motor functions but also the cognitive and affective functions of Parkinson's disease (PD) patients. The main targets of DBS for PD are subthalamic nucleus (STN) and globus pallidus interna (GPi). Ventralis intermedius (Vim)-DBS was found to be effective in improving tremor. However, Vim-DBS cannot sufficiently improve akinesia and rigidity. Therefore, Vim-DBS is seldom carried out for the treatment of PD. In this article, we review the present state of DBS, mainly STN-DBS and GPi-DBS, for PD. In the first part of the article, appropriate indications and practical effects established in previous studies are discussed. The findings of previous investigations on the complications caused by the surgical procedure and on the adverse events induced by DBS itself are reviewed. In the second part, we discuss target selection (GPi vs. STN) and the effect of DBS on nonmotor symptoms. In the final part, as issues that should be resolved, the suitable timing of surgery, symptoms unresponsive to DBS such as on-period axial symptoms, and the related postoperative programing of stimulation parameters, are discussed.

Peering Through Titan Haze

NASA Image and Video Library

2015-12-04

This composite image shows an infrared view of Saturn's moon Titan from NASA's Cassini spacecraft, acquired during the mission's "T-114" flyby on Nov. 13, 2015. The spacecraft's visual and infrared mapping spectrometer (VIMS) instrument made these observations, in which blue represents wavelengths centered at 1.3 microns, green represents 2.0 microns, and red represents 5.0 microns. A view at visible wavelengths (centered around 0.5 microns) would show only Titan's hazy atmosphere (as in PIA14909). The near-infrared wavelengths in this image allow Cassini's vision to penetrate the haze and reveal the moon's surface. During this Titan flyby, the spacecraft's closest-approach altitude was 6,200 miles (10,000 kilometers), which is considerably higher than those of typical flybys, which are around 750 miles (1,200 kilometers). The high flyby allowed VIMS to gather moderate-resolution views over wide areas (typically at a few kilometers per pixel). The view looks toward terrain that is mostly on the Saturn-facing hemisphere of Titan. The scene features the parallel, dark, dune-filled regions named Fensal (to the north) and Aztlan (to the south), which form the shape of a sideways letter "H." Several places on the image show the surface at higher resolution than elsewhere. These areas, called subframes, show more detail because they were acquired near closest approach. They have finer resolution, but cover smaller areas than data obtained when Cassini was farther away from Titan. Near the limb at left, above center, is the best VIMS view so far of Titan's largest confirmed impact crater, Menrva (first seen by the RADAR instrument in PIA07365). Similarly detailed subframes show eastern Xanadu, the basin Hotei Regio, and channels within bright terrains east of Xanadu. (For Titan maps with named features see http://planetarynames.wr.usgs.gov/Page/TITAN/target.) Due to the changing Saturnian seasons, in this late northern spring view, the illumination is significantly changed from that seen by VIMS during the "T-9" flyby on December 26, 2005 (PIA02145). The sun has moved higher in the sky in Titan's northern hemisphere, and lower in the sky in the south, as northern summer approaches. This change in the sun's angle with respect to Titan's surface has made high southern latitudes appear darker, while northern latitudes appear brighter. http://photojournal.jpl.nasa.gov/catalog/PIA20016

Saturn's icy satellites investigated by Cassini-VIMS. I. Full-disk properties: 350-5100 nm reflectance spectra and phase curves

USGS Publications Warehouse

Filacchione, G.; Capaccioni, F.; McCord, T.B.; Coradini, A.; Cerroni, P.; Bellucci, G.; Tosi, F.; D'Aversa, E.; Formisano, V.; Brown, R.H.; Baines, K.H.; Bibring, J.-P.; Buratti, B.J.; Clark, R.N.; Combes, M.; Cruikshank, D.P.; Drossart, P.; Jaumann, R.; Langevin, Y.; Matson, D.L.; Mennella, V.; Nelson, R.M.; Nicholson, P.D.; Sicardy, B.; Sotin, Christophe; Hansen, G.; Hibbitts, K.; Showalter, M.; Newman, S.

2007-01-01

Saturn's icy satellites are among the main scientific objectives of the Cassini-VIMS (Visual and Infrared Mapping Spectrometer) experiment. This paper contains a first systematic and comparative analysis of the full-disk spectral properties of Dione, Enceladus, Epimetheus, Hyperion, Iapetus, Mimas, Phoebe, Rhea and Tethys as observed by VIMS from July 2004 to June 2005. The disk integrated properties (350-5100 nm reflectance spectra and phase curves at 550-2232 nm) and images of satellites are reported and discussed in detail together with the observed geometry. In general, the spectra in the visible spectral range are almost featureless and can be classified according to the spectral slopes: from the bluish Enceladus and Phoebe to the redder Iapetus, Hyperion and Epimetheus. In the 1000-1300 nm range the spectra of Enceladus, Tethys, Mimas and Rhea are characterized by a negative slope, consistent with a surface largely dominated by water ice, while the spectra of Iapetus, Hyperion and Phoebe show a considerable reddening pointing out the relevant role played by darkening materials present on the surface. In between these two classes are Dione and Epimetheus, which have a flat spectrum in this range. The main absorption bands identified in the infrared are the 1520, 2020, 3000 nm H2O/OH bands (for all satellites), although Iapetus dark terrains show mostly a deep 3000 nm band while the 1520 and 2020 nm bands are very faint. In this spectral range, the Iapetus spectrum is characterized by a strong reddening. The CO2 band at 4260 nm and the Fresnel ice peak around 3100 nm are evident only on Hyperion, Phoebe and Iapetus. The phase curves at 550 and at 2232 nm are reported for all the available observations in the 0??-144?? range; Rhea shows an opposition surge at visible wavelengths in the 0.5??-1.17?? interval. The improvement on the retrieval of the full-disk reflectance spectra can be appreciated by a direct comparison with ground-based telescopic data available from literature. Finally, data processing strategies and recent upgrades introduced in the VIMS-V calibration pipeline (flat-field and destriping-despiking algorithm) are discussed in appendices. ?? 2006 Elsevier Inc. All rights reserved.

Saturn's icy satellites investigated by Cassini-VIMS. II. Results at the end of nominal mission

USGS Publications Warehouse

Filacchione, G.; Capaccioni, F.; Clark, R.N.; Cuzzi, J.N.; Cruikshank, D.P.; Coradini, A.; Cerroni, P.; Nicholson, P.D.; McCord, T.B.; Brown, R.H.; Buratti, B.J.; Tosi, F.; Nelson, R.M.; Jaumann, R.; Stephan, K.

2010-01-01

We report the detailed analysis of the spectrophotometric properties of Saturn's icy satellites as derived by full-disk observations obtained by visual and infrared mapping spectrometer (VIMS) experiment aboard Cassini. In this paper, we have extended the coverage until the end of the Cassini's nominal mission (June 1st 2008), while a previous paper (Filacchione, G., and 28 colleagues [2007]. Icarus 186, 259-290, hereby referred to as Paper I) reported the preliminary results of this study. During the four years of nominal mission, VIMS has observed the entire population of Saturn's icy satellites allowing us to make a comparative analysis of the VIS-NIR spectral properties of the major satellites (Mimas, Enceladus, Tethys, Dione, Rhea, Hyperion, Iapetus) and irregular moons (Atlas, Prometheus, Pandora, Janus, Epimetheus, Telesto, Calypso, Phoebe). The results we discuss here are derived from the entire dataset available at June 2008 which consists of 1417 full-disk observations acquired from a variety of distances and inclinations from the equatorial plane, with different phase angles and hemispheric coverage. The most important spectrophotometric indicators (as defined in Paper I: I/F continua at 0.55 ??m, 1.822 ??m and 3.547 ??m, visible spectral slopes, water and carbon dioxide bands depths and positions) are calculated for each observation in order to investigate the disk-integrated composition of the satellites, the distribution of water ice respect to "contaminants" abundances and typical regolith grain properties. These quantities vary from the almost pure water ice surfaces of Enceladus and Calypso to the organic and carbon dioxide rich Hyperion, Iapetus and Phoebe. Janus visible colors are intermediate between these two classes having a slightly positive spectral slope. These results could help to decipher the origins and evolutionary history of the minor moons of the Saturn's system. We introduce a polar representation of the spectrophotometric parameters as function of the solar phase angle (along radial distance) and of the effective longitude interval illuminated by the Sun and covered by VIMS during the observation (in azimuth) to better investigate the spatial distribution of the spectrophotometric quantities across the regular satellites hemispheres. Finally, we report the observed spectral positions of the 4.26 ??m band of the carbon dioxide present in the surface material of three outermost moons Hyperion, Iapetus and Phoebe. ?? 2009 Elsevier Inc.

Correlations between Cassini VIMS spectra and RADAR SAR images: Implications for Titan's surface composition and the character of the Huygens Probe Landing Site

USGS Publications Warehouse

Soderblom, L.A.; Kirk, R.L.; Lunine, J.I.; Anderson, J.A.; Baines, K.H.; Barnes, J.W.; Barrett, J.M.; Brown, R.H.; Buratti, B.J.; Clark, R.N.; Cruikshank, D.P.; Elachi, C.; Janssen, M.A.; Jaumann, R.; Karkoschka, E.; Le Mouélic, Stéphane; Lopes, R.M.; Lorenz, R.D.; McCord, T.B.; Nicholson, P.D.; Radebaugh, J.; Rizk, B.; Sotin, Christophe; Stofan, E.R.; Sucharski, T.L.; Tomasko, M.G.; Wall, S.D.

2007-01-01

Titan's vast equatorial fields of RADAR-dark longitudinal dunes seen in Cassini RADAR synthetic aperture images correlate with one of two dark surface units discriminated as "brown" and "blue" in Visible and Infrared Mapping Spectrometer (VIMS) color composites of short-wavelength infrared spectral cubes (RGB as 2.0, 1.6, 1.3 ??m). In such composites bluer materials exhibit higher reflectance at 1.3 ??m and lower at 1.6 and 2.0 ??m. The dark brown unit is highly correlated with the RADAR-dark dunes. The dark brown unit shows less evidence of water ice suggesting that the saltating grains of the dunes are largely composed of hydrocarbons and/or nitriles. In general, the bright units also show less evidence of absorption due to water ice and are inferred to consist of deposits of bright fine precipitating tholin aerosol dust. Some set of chemical/mechanical processes may be converting the bright fine-grained aerosol deposits into the dark saltating hydrocarbon and/or nitrile grains. Alternatively the dark dune materials may be derived from a different type of air aerosol photochemical product than are the bright materials. In our model, both the bright aerosol and dark hydrocarbon dune deposits mantle the VIMS dark blue water ice-rich substrate. We postulate that the bright mantles are effectively invisible (transparent) in RADAR synthetic aperture radar (SAR) images leading to lack of correlation in the RADAR images with optically bright mantling units. RADAR images mostly show only dark dunes and the water ice substrate that varies in roughness, fracturing, and porosity. If the rate of deposition of bright aerosol is 0.001-0.01 ??m/yr, the surface would be coated (to optical instruments) in hundreds-to-thousands of years unless cleansing processes are active. The dark dunes must be mobile on this very short timescale to prevent the accumulation of bright coatings. Huygens landed in a region of the VIMS bright and dark blue materials and about 30 km south of the nearest occurrence of dunes visible in the RADAR SAR images. Fluvial/pluvial processes, every few centuries or millennia, must be cleansing the dark floors of the incised channels and scouring the dark plains at the Huygens landing site both imaged by Descent Imager/Spectral Radiometer (DISR). ?? 2007 Elsevier Ltd. All rights reserved.

The Case for Massive and Ancient Rings of Saturn

NASA Astrophysics Data System (ADS)

Esposito, Larry W.

2016-10-01

Analysis of Voyager and Pioneer 11 results give a mass for Saturn's rings, M = 5 x 10-8 Msat. This is about the mass of Saturn's small moon Mimas. This has been interpreted as a lower limit to the ring mass (Esposito et al 1983), since the thickest parts of the rings were not penetrated by the stellar occultstion, and this calculation assumes an unvarying particle size throughout the rings. Because the rings are constantly bombarded by micrometeroids, their current composition of nearly pure water ice implies such low mass rings must have formed recently. The case is particularly strong for Saturn's A ring, where the data are the best, implying the A ring is less than 10% of the age of the Saturn (Esposito 1986). Cassini results compound this problem. UVIS spectra are consistent with either young rings or rings about 10x as massive as the Voyager estimate (Elliott and Esposito (2011). CDA confirms the impacting mass flux is similar to that assumed for the pollution calculations (Kempf etal 2015). VIMS analysis of density wave signatures in the B ring gives a value of about 1/3 the Voyager value (Hedmann etal 2016). This VIMS result implies the rings are even younger! The problem is that young rings are very unlikely to be formed recently, meaning that we live in a very special epoch, following some unlikely recent origin… like disruption of a medium sized moon or capture of the fragments of a disrupted comet (Charnoz etal 2009).To take the VIMS results at face value, Saturn's low mass rings must be very young. The optically thick B ring must be made of small, porous or fractal particles. An alternative is that we accept the higher mass interpretation of the Pioneer 11 results (Esposito etal 2008) using the granola bar model of Colwell etal 2007. This would imply that the density wave structure seen by VIMS is not sensing all the mass in the rings, where structure near strong resonances is dominted by temporary aggregates, and where non-linear effects cause the particles to jam (Lewis and Stewart 2009). The density waves may be seeing the mass density in the gaps between self-gravity wakes, whose optical depth is roughly contant and considerably lower than the total B ring opacity (Colwell etal 2007).

VLF electromagnetic investigations of the crater and central dome of Mount St. Helens, Washington

USGS Publications Warehouse

Towle, J.N.

1983-01-01

A very low frequency (VLF) electromagnetic induction survey in the crater of Mount St. Helens has identified several electrically conductive structures that appear to be associated with thermal anomalies and ground water within the crater. The most interesting of these conductive structures lies beneath the central dome. It is probably a partial melt of dacite similar to that comprising the June 1981 lobe of the central dome. ?? 1983.

Does Titan have an Active Surface?

NASA Astrophysics Data System (ADS)

Nelson, R.

2009-12-01

Robert M. Nelson-1, L. W. Kamp-1, R. M. C. Lopes-1, D. L. Matson-1, R. L. Kirk-2, B. W. Hapke-3, M. D. Boryta-4, F. E. Leader-1, W. D. Smythe-1, K. L. Mitchell-1, K. H. Baines-1, R. Jaumann-5, C. Sotin-1, R. N. Clark-6, D. P. Cruikshank-7 , P. Drossart-8, J. I. Lunine-9, M. Combes-10, G. Bellucci-11, J.-P. Bibring-12, F. Capaccioni-11, P. Cerroni-11, A. Coradini-11, V. Formisano-11, G. Filacchione-11, Y. Langevin-12, T. B. McCord-13, V. Mennella-14, B. Sicardy-8, P. G. J. Irwin-15 ,J.C. Pearl-16 1-JPL, 4800 Oak Grove Drive, Pasadena CA 91109;2-USGS, Flagstaff; 3-U Pittsburgh; 4-Mt. San Antonio College; 5-DLR, Berlin;6-USGS Denver; 7-NASA AMES; 8-U Paris-Meudon; 9-U Arizona; 10- Obs de Paris; 11-INAF-ISAF Rome; 12-U Paris -Sud. Orsay; 13-Bear Flt Cntr. Winthrop WA;14-Obs Capodimonte Naples; 15-Clarendon Laboratory, Oxford, UK, 16-Goddard Space Flight Center, Greenbelt MD Surface changes on Saturn’s moon Titan have been reported during the Cassini spacecraft’s four-year orbital tour of the Saturnian system based on Cassini Visual and Infrared Mapping Spectrometer (VIMS) data [1]. Titan’s surface is hard to observe because it’s atmosphere is opaque at visual wavelengths due to absorption by methane in Titan’s atmosphere. VIMS is able to image the surface through “windows” at infrared wavelengths where the methane is relatively transparent [1,2]. VIMS infrared images find surface reflectance variability at Hotei Reggio (26S,78W) and suggest that the variability might be due to deposition, followed by coverage or dissipation, of ammonia frost. Subsequently, Cassini RADAR images found that Hotei Reggio, has lobate “flow” forms, consistent with the morphology of volcanic terrain [3]. Here we report the discovery of lobate “flow” patterns at Hotei Reggio based on VIMS infrared images taken during Cassini close flybys during 2008-2009. This new evidence is consistent with the suggestion that the brightness variability at Hotei Reggio is associated with ammonia, a compound expected in Titan’s interior. This, combined with the previous evidence from VIMS and RADAR images, creates a strong case for Titan having a presently active surface, possibly due to cryovolcanism. Cassini encountered Titan at very close range on 2008-11-19-13:58 and again on 2008-12-05-12:38. These epochs are called T47 and T48. Comparison of earlier lower resolution data (T5) with the recent T47 and T48 data reveal changes of the surface reflectance and morphology in the Hotei region. This is the first evidence from VIMS that confirms the RADAR report that Hotei Reggio has morphology consistent with volcanic terrain. It has not escaped our attention that ammonia, in association with methane and nitrogen, the principal species of Titan’s atmosphere, closely replicates the environment at the time that live first emerged on earth. If Titan is currently active then these results raise the following questions: What is the full extent of current geologic activity? What are the ongoing processes? Are Titan’s chemical processes today supporting a prebiotic chemistry similar to that under which life evolved on Earth? This work done at JPL under contract with NASA. Refs: [1]R. M. Nelson et al., Icarus 199 (2009) 429-441. [2]R. M. Nelson et al., GRL, VOL. 36, L04202, doi:10.1029/2008GL036206, 2009. [3]S. D. Wall GRL, VOL. 36, L04203, doi:10.1029/2008GL036415, 2009

Lid for improved dendritic web growth

DOEpatents

Duncan, Charles S.; Kochka, Edgar L.; Piotrowski, Paul A.; Seidensticker, Raymond G.

1992-03-24

A lid for a susceptor in which a crystalline material is melted by induction heating to form a pool or melt of molten material from which a dendritic web of essentially a single crystal of the material is pulled through an elongated slot in the lid and the lid has a pair of generally round openings adjacent the ends of the slot and a groove extends between each opening and the end of the slot. The grooves extend from the outboard surface of the lid to adjacent the inboard surface providing a strip contiguous with the inboard surface of the lid to produce generally uniform radiational heat loss across the width of the dendritic web adjacent the inboard surface of the lid to reduce thermal stresses in the web and facilitate the growth of wider webs at a greater withdrawal rate.

Efg Crystal Growth Apparatus And Method

DOEpatents

Mackintosh, Brian H.; Ouellette, Marc

2003-05-13

An improved mechanical arrangement controls the introduction of silicon particles into an EFG (Edge-defined Film-fed Growth) crucible/die unit for melt replenishment during a crystal growth run. A feeder unit injects silicon particles upwardly through a center hub of the crucible/die unit and the mechanical arrangement intercepts the injected particles and directs them so that they drop into the melt in a selected region of the crucible and at velocity which reduces splashing, whereby to reduce the likelihood of interruption of the growth process due to formation of a solid mass of silicon on the center hub and adjoining components. The invention also comprises use of a Faraday ring to alter the ratio of the electrical currents flowing through primary and secondary induction heating coils that heat the crucible die unit and the mechanical arrangement.

Vacuum Processing Technique for Development of Primary Standard Blackbodies

PubMed Central

Navarro, M.; Bruce, S. S.; Johnson, B. Carol; Murthy, A. V.; Saunders, R. D.

1999-01-01

Blackbody sources with nearly unity emittance that are in equilibrium with a pure freezing metal such as gold, silver, or copper are used as primary standard sources in the International Temperature Scale of 1990 (ITS-90). Recently, a facility using radio-frequency induction heating for melting and filling the blackbody crucible with the freeze metal under vacuum conditions was developed at the National Institute of Standards and Technology (NIST). The blackbody development under a vacuum environment eliminated the possibility of contamination of the freeze metal during the process. The induction heating, compared to a resistively heated convection oven, provided faster heating of crucible and resulted in shorter turn-around time of about 7 h to manufacture a blackbody. This paper describes the new facility and its application to the development of fixed-point blackbodies.

In situ major and trace element analysis of amphiboles in quartz monzodiorite porphyry from the Tonglvshan Cu-Fe (Au) deposit, Hubei Province, China: insights into magma evolution and related mineralization

NASA Astrophysics Data System (ADS)

Duan, Deng-Fei; Jiang, Shao-Yong

2017-05-01

The Tonglvshan deposit is the largest Cu-Fe (Au) skarn deposit in the Edong district, which is located in the westernmost part of the Middle and Lower Yangtze River metallogenic belt, China. In this study, we performed a detailed in situ analysis of major and trace elements in amphiboles from the ore-related Tonglvshan quartz monzodiorite porphyry using electron microprobe (EMPA) analysis and laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS). Two distinct populations of amphiboles, which can be distinguished by their aluminum content, are found in the quartz monzodiorite porphyry. The low-aluminum (Low-Al) amphiboles are subhedral or anhedral and formed at 46.3-73.5 MPa and 713-763 °C. In contrast, the high-aluminum (High-Al) amphiboles are euhedral and formed at 88-165 MPa and 778-854 °C. Some euhedral amphiboles are partially or completely replaced by Low-Al amphibole. The compositions of parental melts in equilibrium with the High-Al amphibole ( Melt 1) and Low-Al amphibole ( Melt 2) were computed by applying solid/liquid partition coefficients. This modeling shows that magma in equilibrium with High-Al amphibole ( Melt 1) underwent 40% fractional crystallization of amphibole, plagioclase and apatite at a depth of 5 km to evolve to magma in equilibrium with Low-Al amphibole ( Melt 2). Copper enrichment occurred in the magma after undergoing fractional crystallization. The magma had a high oxygen fugacity, increasing from NNO + 1 ( Melt 1) through NNO + 2 to HM ( Melt 2), which could have prevented the loss of Cu (and possibly Au) to sulfide minerals during crystallization. Finally, the evolved magma intruded to shallower depths, where it presumably exsolved aqueous ore-forming fluids. Therefore, the large Cu-Fe-Au reserves of the Tonglvshan deposit can likely be attributed to a combination of controlling factors, including high oxygen fugacity, fractional crystallization, fluid exsolution, and a shallow emplacement depth.

Understanding the High Temperature Behavior of Niobium Aluminides; First Year Summary Report

DTIC Science & Technology

1990-11-08

characterization to follow. Near-net shape processing may be used to form test specimens. A transmission elec- tron microscopy effort will be used ...to identify deformation mechanisms. ,, 20 DISTRIBUTION/AVAII ABILITY OF ABSTRACT SK’NCI ASSIFIFD’UNL MITED • SAME AS R"T • DTC USEDS J...ingots have been processed for us (gratis) by Nippon Mining Corporation by vacuum induction melted from a stock of niobium oxide and elemental aluminum

Plastic welder

NASA Technical Reports Server (NTRS)

Buckley, J. D.; Fox, R. L.; Swain, R. J.

1980-01-01

Low-cost, self-contained, portable welder joins plastic parts by induction heating. Welder is useable in any atmosphere or in vacuum and with most types of thermoplastic; plastic components can be joined in situ. Device is applicable to aerospace industry and in automobile, furniture, and construction industries. Power requirements are easily met by battery or solar energy. In welder, toroidal inductor transfers magnetic flux through thermoplastic to screen. Heated screen causes plastic surface on either side to melt and flow into it to form joint.

Optical and contact nondestructive measurement of the laser remelting layers

NASA Astrophysics Data System (ADS)

Chmelíčková, Hana; Lapšanská, Hana; Hiklová, Helena; Havelková, Martina; Medlín, Rostislav; Beneš, Petr

2007-06-01

Laser beam of the infrared pulsed Nd:YAG laser was used to re-melting PVD coatings on the steel substrates. Chemical composition of these layers contains carbide Cr 3C II with alloy NiCr or nitrides TiN, TiAlN, TiAlSiN and CrAlSiN. First coatings were prepared by method of high velocity oxygen fuel (HVOF) that protects the machine component surfaces from abrasion, corrosion or ensures thermal isolation, nitrides by PVD (Physical Vapor Deposition). Processing parameters such as pulse energy, pulse length and frequency were optimized in many experiments to achieve the sufficient surface energy density to melting without vaporization of the material. Multimode beam diameters about some millimetres were computed and adjusted in the suitable distance from focus plane. High laser power re-melting decreases their porosity, increases adhesion to basic material. In case of high laser energy gas vapours escape from basic material and cause fissures, re-melted surfaces have to be carefully controlled. New approach to evaluation of the quality surface structure was realized by laser confocal microscopy. Direct measuring or 3D surface model is possible with resolution less than hundred nanometres, depressions along laser beam path or rises on the laser spot edges were determined. Particles and grains with dimensions about one micron in re-melting structures can be observed better then by optical microscopy. Parallel measurements of the surface roughness were realized by the contact inductive profilometer Talysurf, collected data were displayed by software tool Talymap in a plane or spatial pictures.

The Electrochemical Co-reduction of Mg-Al-Y Alloys in the LiCl-NaCl-MgCl2-AlF3-YCl3 Melts

NASA Astrophysics Data System (ADS)

Li, Mei; Liu, Yaochen; Han, Wei; Wang, Shanshan; Zhang, Milin; Yan, Yongde; Shi, Weiqun

2015-04-01

The electrochemical formation of Mg-Al-Y alloys was studied in the LiCl-NaCl-MgCl2 melts by the addition of AlF3 and YCl3 on a molybdenum electrode at 973 K (700 °C). In order to reduce the volatilization of salt solvent in the electrolysis process, the volatile loss of LiCl-NaCl-MgCl2 and LiCl-KCl-MgCl2 melts was first measured in the temperature range from 873 K to 1023 K (600 °C to 750 °C). Then, the electrochemical behaviors of Mg(II), Al(III), Y(III) ions and alloy formation processes were investigated by cyclic voltammetry, chronopotentiometry, and open circuit chronopotentiometry. The cyclic voltammograms indicate that the under-potential deposition of magnesium and yttrium on pre-deposited Al leads to formation of Mg-Al and Al-Y intermetallic compounds. The Mg-Al-Y alloys were prepared by galvanostatic electrolysis in the LiCl-NaCl-MgCl2-AlF3-YCl3 melts and characterized by X-ray diffraction and scanning electron microscopy with energy dispersive spectrometry. Composition of the alloys was analyzed by inductively coupled plasma-atomic emission spectrometer, and current efficiency was also determined by the alloy composition.

Silicon crystals: Process for manufacturing wafer-like silicon crystals with a columnar structure

NASA Technical Reports Server (NTRS)

Authier, B.

1978-01-01

Wafer-like crystals suitable for making solar cells are formed by pouring molten Si containing suitable dopants into a mold of the desired shape and allowing it to solidify in a temperature gradient, whereby the large surface of the melt in contact with the mold is kept at less than 200 D and the free surface is kept at a temperature of 200-1000 D higher, but below the melting point of Si. The mold can also be made in the form of a slit, whereby the 2 sides of the mold are kept at different temperatures. A mold was milled in the surface of a cylindrical graphite block 200 mm in diameter. The granite block was induction heated and the bottom of the mold was cooled by means of a water-cooled Cu plate, so that the surface of the mold in contact with one of the largest surfaces of the melt was held at approximately 800 D. The free surface of the melt was subjected to thermal radiation from a graphite plate located 2 mm from the surface and heated to 1500 D. The Si crystal formed after slow cooling to room temperature had a columnar structure and was cut with a diamond saw into wafers approximately 500 mm thick. Solar cells prepared from these wafers had efficiencies of 10 to 11%.

Spectroscopic classification of icy satellites of Saturn I: Identification of terrain units on Dione

NASA Astrophysics Data System (ADS)

Scipioni, F.; Tosi, F.; Stephan, K.; Filacchione, G.; Ciarniello, M.; Capaccioni, F.; Cerroni, P.

2013-11-01

Dione is one of the largest and densest icy satellites of Saturn. Its surface shows a marked asymmetry between its leading and trailing hemispheres, the leading side being brighter than the trailing side, which shows regions mantled by a dark veneer whose origin is likely exogenic. In order to identify different terrain units we applied the Spectral Angle Mapper (SAM) classification technique to Dione’s hyperspectral images acquired by the Visual and Infrared Mapping Spectrometer (VIMS) onboard the Cassini Orbiter in the infrared range (0.88-5.12 μm). On a relatively limited portion of the surface of Dione we first identified nine spectral endmembers, corresponding to as many terrain units, which mostly distinguish for water ice abundance and ice grain size. We then used these endmembers in SAM to achieve a comprehensive classification of the entire surface. The analysis of the infrared spectra returned by VIMS shows that different regions of Dione have variations in water ice bands depths, in average ice grain size, and in the concentration of contaminants, such as CO2 and hydrocarbons, which are clearly connected to morphological and geological structures. Generally, the spectral units that classify optically dark terrains are those showing suppressed water ice bands, a finer ice grain size and a higher concentration of carbon dioxide. Conversely, spectral units labeling brighter regions have deeper water ice absorption bands, higher albedo and a smaller concentration of contaminants. We also considered VIMS cubes of the small satellite Helene (one of the two Dione’s trojan moons) and we compared its infrared spectra to those of the spectral units found on Dione. We observe that the closest match between the spectra of the two satellites occurs for one of the youngest and freshest terrain units on Dione: the Creusa crater region.

MicroRNA-495 Inhibits Gastric Cancer Cell Migration and Invasion Possibly via Targeting High Mobility Group AT-Hook 2 (HMGA2).

PubMed

Wang, Huashe; Jiang, Zhipeng; Chen, Honglei; Wu, Xiaobin; Xiang, Jun; Peng, Junsheng

2017-02-04

BACKGROUND Gastric cancer is one of the most common malignancies, and has a high mortality rate. miR-495 acts as a suppressor in some cancers and HMGA2 (high mobility group AT-hook 2) is a facilitator for cell growth and epithelial-mesenchymal transition (EMT), but little is known about their effect in gastric cancer. This study aimed to investigate the role and mechanism of miR-495 in gastric cancer. MATERIAL AND METHODS miR-495 levels were quantitatively analyzed in gastric cancer tissue and GES-1, SGC-7901, BGC-823, and HGC-27 cell lines by qRT-PCR. Levels of miR-495 and HMGA2 were altered by cell transfection, after which cell migration and invasion were examined by Transwell and E-cadherin (CDH1); vimentin (VIM), and alpha smooth muscle actin (ACTA2) were detected by qRT-PCR and Western blotting. The interaction between miR-495 and HMGA2 was verified by dual-luciferase reporter assay. RESULTS miR-495 was significantly downregulated in cancer tissue and cell lines (p<0.05). Its overexpression inhibited cell migration and invasion, elevated CDH1, and inhibited VIM and ACTA2 levels in BGC-823 and HGC-27 cells. miR-495 directly inhibited HMGA2, which was upregulated in gastric cancer tissue, and promoted cell migration and invasion, inhibited CDH1, and elevated VIM and ACTA2. CONCLUSIONS miR-495 acts as a tumor suppressor in gastric cancer by inhibiting cell migration and invasion, which may be associated with its direct inhibition on HMGA2. These results suggest a promising therapeutic strategy for gastric cancer treatment.

Relative Distribution of Quadriceps Head Anatomical Cross-Sectional Areas and Volumes – Sensitivity to Pain and to Training Intervention

PubMed Central

Sattler, M; Dannhauer, T; Ring-Dimitriou, S; Sänger, AM; Wirth, W; Hudelmaier, M; Eckstein, F

2014-01-01

SUMMARY Introduction Quadriceps heads are important in biomechanical stabilization and in the pathogenesis osteoarthritis of the knee. This is the first study to explore the relative distribution of quadriceps head anatomical cross-sectional areas (ACSA) and volumes, and their response to pain and to training intervention. Methods The relative proportions of quadriceps heads were determined in 48 Osteoarthritis Initiative participants with unilateral pain (65% women; age 45–78y). Quadriceps head volumes were also measured in 35 untrained women (45–55y) before and after 12 week training intervention. Cross-sectional areas of the vastus medialis (VM), inter-medius (VIM), and lateralis (VL), and of the rectus femoris (RF) were determined from axial T1-weighted MR images. Results The proportion of the VM on the total quadriceps ACSA increased from proximal to distal. The difference in quadriceps ACSA of painful (vs. pain-free) limbs was −5.4% for the VM (p<0.001), −6.8% for the VL (p<0.01), −2.8% for the VIM (p=0.06), and +3.4% for the RF (p=0.67) but the VM/VL ratio was not significantly altered. The muscle volume increase during training intervention was +4.2% (p<0.05) for VM, +1.3% for VL, +2.0% for VIM (p<0.05) and +1.6% for RF. Conclusion The proportion of quadriceps head relative to total muscle ACSA and volume depends on the anatomical level studied. The results suggest that there may be a differential response of the quadriceps heads to pain-induced atrophy and to training-related hypertrophy. Studies in larger samples are needed to ascertain whether the observed differences in response to pain and training are statistically and clinically significant. PMID:25153247

Decadal timescale variability of the Enceladus plumes inferred from Cassini images

NASA Astrophysics Data System (ADS)

Ingersoll, Andrew P.; Ewald, Shawn P.

2017-01-01

The brightness of the Enceladus plumes varies with position in the satellite's eccentric orbit, with altitude above the surface, and with time from one year to the next. Hedman et al. (2013, hereinafter H13) were the first to report these variations. They used data from Cassini's Visible and Infrared Mapping Spectrometer (VIMS). Here we present brightness observations from Cassini's Imaging Science Subsystem (ISS), which has 40 times higher spatial resolution than VIMS. Our unit of measure is slab density, the total mass of particles in a horizontal slab per unit thickness of the slab. Using slab density is one approach to correcting for the variation of brightness with wavelength and scattering angle. Approaches differ mainly by a multiplicative scaling factor that depends on particle density, which is uncertain. All approaches lead to the same qualitative conclusions and agree with the conclusions from VIMS. We summarize our conclusions as follows: At all altitudes between 50 and 200 km, the corrected brightness is 4-5 times greater when Enceladus is farther from Saturn (near apocenter) than when it is closer (near pericenter). A secondary maximum occurs after pericenter and before apocenter. Corrected brightness vs. altitude is best described as a power law whose negative exponent is greatest in magnitude at apocenter, indicating a slower launch speed for the particles at apocenter than at other points in the orbit. Corrected brightness decreased by roughly a factor of two during much of the period 2005-2015. The last is our principal result, and we offer three hypotheses to explain it. One is a long-period tide-the decreasing phase of an 11-year cycle in orbital eccentricity; another is buildup of ice at the throats of the vents; and the third is seasonal change-the end of summer at the south pole.

The Distribution of Submersed Aquatic Vegetation in the Fresh and Oligohaline Tidal Potomac River, 2005

USGS Publications Warehouse

Rybicki, Nancy B.; Justiniano-Velez, Erika M.; Schenk, Edward R.; Baldizar, Julie M.; Hunter, Sarah E.

2008-01-01

Submersed aquatic vegetation (SAV) is a critical component of the Potomac River ecosystem. Though SAV provides important habitat for fauna and stabilizes bottom sediment, very dense beds may restrict recreational and commercial navigation. Exotic species of SAV are managed by the Metropolitan Washington Council of Governments Potomac Aquatic Plant Management Program (PAPMP). Selected beds of primarily exotic SAV species that limit navigation are harvested mechanically. The program began in 1986 when approximately 40 acres of plants were harvested from 18 sites (Metropolitan Washington Council of Governments 1987). Monitoring efforts are an effective means of quantifying the distribution and abundance of the exotic species, Hydrilla verticillata (hydrilla) and other SAV species. These annual surveys provide a basis for identifying large-scale changes and trends throughout the ecosystem and allow managers to evaluate the effectiveness of resource management policies based on a reliable scientific foundation (Rybicki and Landwehr, 2007). The U.S. Geological Survey (USGS) has monitored the distribution and composition of SAV beds in the fresh and oligohaline (salinity 0.5 to 5) tidal Potomac River since 1978 using transect sampling (1978 to 1981, 1985 to 1987, and 2002) and shoreline surveys (1983 to 2005). The Government of the District of Columbia has monitored the portion of the Potomac and Anacostia Rivers within Washington DC since 1998 (Rottman, 1999; Ryan, 2005, 2006). The species of SAV observed in beds in the tidal Potomac River are incorporated into the Virginia Institute of Marine Science (VIMS) annual report on SAV distribution in Chesapeake Bay. The VIMS report and methods are available at http://www.vims.edu/bio/sav (Orth et al., 2006). Additional publications concerning SAV distribution in the Potomac River can be found at http://water.usgs.gov/nrp/proj.bib/sav/wethome.htm.

Prevalence of carbapenemase producing Enterobacteriaceae isolated from German pig-fattening farms during the years 2011-2013.

PubMed

Roschanski, Nicole; Friese, Anika; von Salviati-Claudius, Christina; Hering, Johanna; Kaesbohrer, Annemarie; Kreienbrock, Lothar; Roesler, Uwe

2017-02-01

Since recently Enterobacteriaceae carrying bla VIM-1 genes have been isolated in German animal husbandries, the monitoring of carbapenemase producing Enterobacteriaceae (CPE) in livestock became a major topic within the European Union. Nevertheless, due to missing surveillance studies the worldwide situation in livestock and livestock associated surroundings might still be underestimated. The here described study provides an overview of the CPE-prevalence in German pig-fattening farms during the years 2011-2013 (period when previously described bla VIM-1 findings occurred on pig-fattening farms (Efsa, 2011; Fischer et al., 2012, 2013a)). Therefore, a collection of 238 bacterial anacultures derived from pooled faeces and boot swab samples, collected in a cross-sectional study including 58 pig-fattening farms throughout Germany, were investigated. The bacteria were selected on MacConkey agar plates containing 0.125μg/ml meropenem. Enterobacteriaceae which were able to grow on these plates were further investigated for the presence of carbapenemase genes. Out of eight CPE-suspicious strains, two Escherichia (E.) coli strains-deriving from the same farm-contained the carbapenemase gene bla VIM-1 . For the remaining six Enterobacteriaceae it seems to be likely that they possess other resistance mechanisms, leading to reduced carbapenem susceptibility. Based on the obtained results, the overall CPE prevalence for German pig-fattening farms, sampled during the years 2011-2013 was 1.7%; 95% CI: 0-10. However, as it is of great importance to prevent a further spread of these bacteria between farms and livestock populations as well as their introduction into the food chain, an understanding of their routes of introduction and spread in combination with intensified monitoring programs are considered necessary. Copyright © 2015 Elsevier B.V. All rights reserved.

Evaluation of a real-time PCR assay for rectal screening of OXA-48-producing Enterobacteriaceae in a general intensive care unit of an endemic hospital.

PubMed

Fernández, J; Cunningham, S A; Fernández-Verdugo, A; Viña-Soria, L; Martín, L; Rodicio, M R; Escudero, D; Vazquez, F; Mandrekar, J N; Patel, R

2017-07-01

Carbapenemase-producing Enterobacteriaceae are increasing worldwide. Rectal screening for these bacteria can inform the management of infected and colonized patients, especially those admitted to intensive care units (ICUs). A laboratory developed, qualitative duplex real-time polymerase chain reaction assay for rapid detection of OXA-48-like and VIM producing Enterobacteriaceae, performed on rectal swabs, was designed and evaluated in an intensive care unit with endemic presence of OXA-48. During analytical assay validation, no cross-reactivity was observed and 100% sensitivity and specificity were obtained for both bla OXA-48-like and bla VIM in all spiked clinical samples. During the clinical part of the study, the global sensitivity and specificity of the real-time PCR assay for OXA-48 detection were 95.7% and 100% (P=0.1250), respectively, in comparison with culture; no VIM-producing Enterobacteriaceae were detected. Clinical features of patients in the ICU who were colonized or infected with OXA-48 producing Enterobacteriaceae, including outcome, were analyzed. Most had severe underlying conditions, and had risk factors for colonization with carbapenemase-producing Enterobacteriaceae before or during ICU admission, such as receiving previous antimicrobial therapy, prior healthcare exposure (including long-term care), chronic disease, immunosuppression and/or the presence of an intravascular catheter and/or mechanical ventilation device. The described real-time PCR assay is fast (~2-3hours, if DNA extraction is included), simple to perform and results are easy to interpret, features which make it applicable in the routine of clinical microbiology laboratories. Implementation in endemic hospitals could contribute to early detection of patients colonized by OXA-48 producing Enterobacteriaceae and prevention of their spread. Copyright © 2017 Elsevier Inc. All rights reserved.

Comparative marker analysis after isolation and culture of testicular cells from the immature marmoset.

PubMed

Albert, Silvia; Wistuba, Joachim; Eildermann, Katja; Ehmcke, Jens; Schlatt, Stefan; Gromoll, Joerg; Kossack, Nina

2012-01-01

The marmoset monkey is a valuable model in reproductive medicine. While previous studies have evaluated germ cell dynamics in the postnatal marmoset, the features of testicular somatic cells remain largely unknown. Therefore, the aim of this study was to establish marmoset-specific markers for Sertoli and peritubular cells (PTCs) and to compare protocols for the enrichment and culture of testicular cell types. Immunohistochemistry of Sertoli and PTC-specific markers - anti-müllerian hormone (AMH), vimentin (VIM), α-smooth muscle actin (SMA) - was performed and corresponding RNA expression profiles were established by quantitative PCR analysis (SOX9,AMH, FSHR,VIM, and SMA). For these analyses, testicular tissue from newborn (n = 4), 8-week-old (n = 4) and adult (n = 3) marmoset monkeys was used. Protocols for the enrichment and culture of testicular cell fractions from the 8-week-old marmoset monkeys (n = 3) were evaluated and cells were analyzed using germ cell- and somatic cell-specific markers. The expression of AMH, VIM and SMA reflects the proportion and differentiation status of Sertoli and PTCs at the RNA and the protein levels. While applied protocols did not support the propagation of germ cells in vitro, our analyses revealed that PTCs maintain their proliferative potential and constitute the dominant cell type after short- and long-term culture. Expression of functionally meaningful testicular somatic markers is similar in the human and the marmoset monkey, indicating that this primate can indeed be used as model for human testicular development. The PTC culture system established in this study will facilitate the identification of factors influencing male sex differentiation and spermatogenesis. Copyright © 2012 S. Karger AG, Basel.

Complexity of resistance mechanisms to imipenem in intensive care unit strains of Pseudomonas aeruginosa.

PubMed

Fournier, Damien; Richardot, Charlotte; Müller, Emeline; Robert-Nicoud, Marjorie; Llanes, Catherine; Plésiat, Patrick; Jeannot, Katy

2013-08-01

Pseudomonas aeruginosa can become resistant to carbapenems by both intrinsic (mutation-driven) and transferable (β-lactamase-based) mechanisms. Knowledge of the prevalence of these various mechanisms is important in intensive care units (ICUs) in order to define optimal prevention and therapeutic strategies. A total of 109 imipenem-non-susceptible (MIC >4 mg/L) strains of P. aeruginosa were collected in June 2010 from the ICUs of 26 French public hospitals. Their resistance mechanisms were characterized by phenotypic, enzymatic, western blotting and molecular methods. Single or associated imipenem resistance mechanisms were identified among the 109 strains. Seven isolates (6.4%) were found to produce a metallo-β-lactamase (one VIM-1, four VIM-2, one VIM-4 and one IMP-29). Porin OprD was lost in 94 (86.2%) strains as a result of mutations or gene disruption by various insertion sequences (ISPa1635, ISPa1328, IS911, ISPs1, IS51, IS222 and ISPa41). Thirteen other strains were shown to be regulatory mutants in which down-regulation of oprD was coupled with overexpressed efflux pumps CzcCBA (n = 1), MexXY (n = 9) and MexEF-OprN (n = 3). The lack of OprD was due to disruption of the oprD promoter by ISPsy2 in one strain and alteration of the porin signal sequence in another. Imipenem resistance in ICU P. aeruginosa strains may result from multiple mechanisms involving metallo-β-lactamase gene acquisition and genetic events (mutations and ISs) inactivating oprD, turning down its expression while increasing efflux activities or preventing insertion of porin OprD in the outer membrane. This diversity of mechanisms allows P. aeruginosa, more than any other nosocomial pathogen, to rapidly adapt to carbapenems in ICUs.

Overproduction of active efflux pump and variations of OprD dominate in imipenem-resistant Pseudomonas aeruginosa isolated from patients with bloodstream infections in Taiwan.

PubMed

Kao, Cheng-Yen; Chen, Shu-Sheng; Hung, Kuei-Hsiang; Wu, Hsiu-Mei; Hsueh, Po-Ren; Yan, Jing-Jou; Wu, Jiunn-Jong

2016-06-13

The emergence of imipenem-resistant Pseudomonas aeruginosa (IRPA) has become a great concern worldwide. The aim of this study was to investigate resistance mechanisms associated with bloodstream isolated IRPA strains in Taiwan. A total of 78 non-duplicated IRPA isolates were isolated from patients with bloodstream infection. The average prevalence of imipenem-resistance in those isolates was 5.9 % during a 10-year longitudinal surveillance in Taiwan. PFGE results showed high clonal diversity among the 78 isolates. VIM-2, VIM-3, OXA-10, and OXA-17 β-lactamases were identified in 2 (2.6 %), 3 (3.8 %), 2 (2.6 %), and 1 (1.3 %) isolates, respectively. Active efflux pumps, AmpC β-lactamase overproduction, and extended-spectrum AmpC cephalosporinases (ESACs) were found in 58 (74.4 %), 25 (32.1 %) and 15 (19.2 %) of IRPA isolates, respectively. oprD mutations with amino acid substitution, shortened putative loop L7, premature stop codon caused by point mutation, frameshift by nucleotide insertion or deletion, and interruption by insertion sequence were found in 19 (24.4 %), 18 (23.1 %), 15 (19.2 %), 14 (17.9 %), and 10 (12.8 %) of isolates, respectively. This study suggests that alterations in the OprD protein and having an active efflux pump are the main mechanisms associated with bloodstream isolated IRPA. Overproduction of AmpC, ESACs, and the presence of VIM- and OXA-type β-lactamases play additional roles in reduced susceptibility to imipenem in P. aeruginosa isolates in Taiwan.

The VIMS CBOS Observing System Buoy, an Initial Scientific Analysis

NASA Astrophysics Data System (ADS)

Brasseur, L. H.; Brubaker, J. M.; Friedrichs, C. T.; Wright, L. D.

2004-12-01

The Virginia Institute of Marine Science (VIMS) has recently deployed a data buoy at Gloucester Point, York River, Virginia as part of the Chesapeake Bay Observing System (CBOS). The data streams collected by the buoy and its associated sensors are wind speed and direction, incoming solar radiation, air temperature, water temperature, salinity, turbidity, fluorescence, and dissolved oxygen. In addition, water velocities throughout the water column are recorded every 5 minutes and wave statistics including directional wave spectra are calculated every hour from an upward looking RD Instruments Acoustic Doppler Current Profiler (ADCP) in 8 meters of water in conjunction with the data buoy. All data are collected in real time and are available to scientists with a 15 minute to 1 hour time lag. These data are used in conjunction with other long tem data sets in the York River and lower Chesapeake Bay such as the Chesapeake Bay National Estuarine Research Reserve (CBNERR) sites' water quality data in the York River and USGS stream flow data to investigate several questions of scientific interest. One of these questions is the observed reverse salinity gradient in the York River during spring flood tides. It was previously thought that this was caused by a temporal mismatch in the phase of flood tide between the lower Chesapeake Bay and the mouth of the York River subestuary only during spring tides when the currents are strongest and the tidal range is large. In 2004, however, this effect can be seen during both spring and neap tides on several occasions in the spring and summer. This phenomenon and others are evaluated in the context of the VIMS observing system buoy and the initial data collected from the buoy are also evaluated in terms of instrument accuracy, ease of data retrieval, and possible uses for this information.

Cassini-VIMS at Jupiter: Solar occultation measurements using Io

USGS Publications Warehouse

Formisano, V.; D'Aversa, E.; Bellucci, G.; Baines, K.H.; Bibring, J.-P.; Brown, R.H.; Buratti, B.J.; Capaccioni, F.; Cerroni, P.; Clark, R.N.; Coradini, A.; Cruikshank, D.P.; Drossart, P.; Jaumann, R.; Langevin, Y.; Matson, D.L.; McCord, T.B.; Mennella, V.; Nelson, R.M.; Nicholson, P.D.; Sicardy, B.; Sotin, Christophe; Chamberlain, M.C.; Hansen, G.; Hibbits, K.; Showalter, M.; Filacchione, G.

2003-01-01

We report unusual and somewhat unexpected observations of the jovian satellite Io, showing strong methane absorption bands. These observations were made by the Cassini VIMS experiment during the Jupiter flyby of December/January 2000/2001. The explanation is straightforward: Entering or exiting from Jupiter's shadow during an eclipse, Io is illuminated by solar light which has transited the atmosphere of Jupiter. This light, therefore becomes imprinted with the spectral signature of Jupiter's upper atmosphere, which includes strong atmospheric methane absorption bands. Intercepting solar light refracted by the jovian atmosphere, Io essentially becomes a "miffor" for solar occultation events of Jupiter. The thickness of the layer where refracted solar light is observed is so large (more than 3000 km at Io's orbit), that we can foresee a nearly continuous multi-year period of similar events at Saturn, utilizing the large and bright ring system. During Cassini's 4-year nominal mission, this probing tecnique should reveal information of Saturn's atmosphere over a large range of southern latitudes and times. ?? 2003 Elsevier Inc. All rights reserved.

Experimental investigation of flow characteristics around four square-cylinder arrays at subcritical Reynolds numbers

NASA Astrophysics Data System (ADS)

Liu, Mingyue; Xiao, Longfei; Yang, Lijun

2015-09-01

The Deep Draft Semi-Submersible (DDS) concepts are known for their favourable vertical motion performance. However, the DDS may experience critical Vortex-Induced Motion (VIM) stemming from the fluctuating forces on the columns. In order to investigate the current-induced excitation forces of VIM, an experimental study of flow characteristics around four square-section cylinders in a square configuration is presented. A number of column spacing ratios and array attack angles were considered to investigate the parametric influences. The results comprise flow patterns, drag and lift forces, as well as Strouhal numbers. It is shown that both the drag and lift forces acting on the cylinders are slightly different between the various L/D values, and the fluctuating forces peak at L/D = 4.14. The lift force of downstream cylinders reaches its maximum at around α = 15°. Furthermore, the flow around circular-section-cylinder arrays is also discussed in comparison with that of square cylinders.

The molecular mechanisms on glomangiopericytoma invasion

PubMed Central

2013-01-01

Purpose To observed the imaging and pathological features of the glomangiopericytoma. Experimental design In this paper we report a typical case of glomangiopericytoma arising in the skull base area and summarize the clinical manifestations, imaging and pathological features of such diseases. Results Immunohistochemical staining confirmed the tumor cells were strongly positive to Vim, SMA, MSA and negative to CD31, CD34. Partial cells were positive to FVIII. The imaging can’t confirm the diagnosis but indicate the the tumor has intact envelope.The cells in the tumor envelope is positive to Vim and negative SMA and FVIII. These findings were compatible with glomangiopericytoma and the cells in the tumor envelope is not glomangiopericytoma cells. Conclusion In view of the clinical and pathological features of the glomangiopericytoma, we believe that the surgery is the best treatment so far and the tumor can be resected completely. The above results can be preliminary reason to explain the low recurrence of such diseases. PMID:24074285

Radiation-grafting of N-vinylimidazole onto silicone rubber for antimicrobial properties

NASA Astrophysics Data System (ADS)

Meléndez-Ortiz, H. Iván; Alvarez-Lorenzo, Carmen; Burillo, Guillermina; Magariños, Beatriz; Concheiro, Angel; Bucio, Emilio

2015-05-01

Poly(N-vinylimidazole) (PVIm) was grafted numbers onto silicone rubber (SR) with the aim of providing antimicrobial properties. The grafting was carried out by means of gamma rays using the direct method. The influence on the grafting yield of absorbed dose, monomer concentration, addition of FeSO4 salt, composition and type of solvent (H2O, MeOH, THF, and acetone) was investigated. Grafts onto SR between 10% and 90% were obtained at doses from 20 to 100 kGy and a dose rate 10.9 kGy h-1; grafting yield increased with monomer concentration and dose. The new graft copolymers were confirmed by Fourier transform infrared spectroscopy (FT-IR). Differential scanning calorimeter (DSC) showed glass transition at 149 and 159 °C for 38% and 88% grafting respectively. Thermogravimetry analysis (TGA) presented two decomposition temperatures for SR-g-VIm at 380 (PVIm) and 440 °C (SR). SR-g-VIm showed antibacterial activity against Pseudomonas aeruginosa.

Vimentin regulates activation of the NLRP3 inflammasome

NASA Astrophysics Data System (ADS)

Dos Santos, Gimena; Rogel, Micah R.; Baker, Margaret A.; Troken, James R.; Urich, Daniela; Morales-Nebreda, Luisa; Sennello, Joseph A.; Kutuzov, Mikhail A.; Sitikov, Albert; Davis, Jennifer M.; Lam, Anna P.; Cheresh, Paul; Kamp, David; Shumaker, Dale K.; Budinger, G. R. Scott; Ridge, Karen M.

2015-03-01

Activation of the NLRP3 inflammasome and subsequent maturation of IL-1β have been implicated in acute lung injury (ALI), resulting in inflammation and fibrosis. We investigated the role of vimentin, a type III intermediate filament, in this process using three well-characterized murine models of ALI known to require NLRP3 inflammasome activation. We demonstrate that central pathophysiologic events in ALI (inflammation, IL-1β levels, endothelial and alveolar epithelial barrier permeability, remodelling and fibrosis) are attenuated in the lungs of Vim-/- mice challenged with LPS, bleomycin and asbestos. Bone marrow chimeric mice lacking vimentin have reduced IL-1β levels and attenuated lung injury and fibrosis following bleomycin exposure. Furthermore, decreased active caspase-1 and IL-1β levels are observed in vitro in Vim-/- and vimentin-knockdown macrophages. Importantly, we show direct protein-protein interaction between NLRP3 and vimentin. This study provides insights into lung inflammation and fibrosis and suggests that vimentin may be a key regulator of the NLRP3 inflammasome.

Processing ISS Images of Titan's Surface

NASA Technical Reports Server (NTRS)

Perry, Jason; McEwen, Alfred; Fussner, Stephanie; Turtle, Elizabeth; West, Robert; Porco, Carolyn; Knowles, Ben; Dawson, Doug

2005-01-01

One of the primary goals of the Cassini-Huygens mission, in orbit around Saturn since July 2004, is to understand the surface and atmosphere of Titan. Surface investigations are primarily accomplished with RADAR, the Visual and Infrared Mapping Spectrometer (VIMS), and the Imaging Science Subsystem (ISS) [1]. The latter two use methane "windows", regions in Titan's reflectance spectrum where its atmosphere is most transparent, to observe the surface. For VIMS, this produces clear views of the surface near 2 and 5 microns [2]. ISS uses a narrow continuum band filter (CB3) at 938 nanometers. While these methane windows provide our best views of the surface, the images produced are not as crisp as ISS images of satellites like Dione and Iapetus [3] due to the atmosphere. Given a reasonable estimate of contrast (approx.30%), the apparent resolution of features is approximately 5 pixels due to the effects of the atmosphere and the Modulation Transfer Function of the camera [1,4]. The atmospheric haze also reduces contrast, especially with increasing emission angles [5].

Coordination-Supported Imidazolate Networks: Water- and Heat-Stable Mesoporous Polymers for Catalysis

DOE PAGES

Zhang, Pengfei; Yang, Shize; Chisholm, Matthew F.; ...

2017-05-29

The poor water stability of most porous coordination polymers (PCPs) or metal-organic frameworks (MOFs) is widely recognised as a barrier hampering their practical applications. Herein, a facile and scalable route to prepare metal-containing polymers with a good stability in boiling water (100°C, 24 h) and air (up to 390°C) is presented. The bifunctional 1-vinylimidazole (VIm) with both a coordinating site and a polymerizable organic group is introduced as the building block. This core strategy includes the synthesis of a rigid monomer with four VIm branches via a coordination process at room temperature, followed by a radical polymerization. Here we callmore » this material Coordination-supported Imidazolate Networks (CINs). Interestingly, CINs are composed of rich mesopores from 2 to 15 nm, as characterized by low-energy (60 kV) STEM-HAADF images. Especially, the stable CINs illustrate a high turnover frequency (TOF) of 779 h -1 in the catalytic oxidation of phenol with H 2O as the green solvent.« less

Suppressing the image smear of the vibration modulation transfer function for remote-sensing optical cameras.

PubMed

Li, Jin; Liu, Zilong; Liu, Si

2017-02-20

In on-board photographing processes of satellite cameras, the platform vibration can generate image motion, distortion, and smear, which seriously affect the image quality and image positioning. In this paper, we create a mathematical model of a vibrating modulate transfer function (VMTF) for a remote-sensing camera. The total MTF of a camera is reduced by the VMTF, which means the image quality is degraded. In order to avoid the degeneration of the total MTF caused by vibrations, we use an Mn-20Cu-5Ni-2Fe (M2052) manganese copper alloy material to fabricate a vibration-isolation mechanism (VIM). The VIM can transform platform vibration energy into irreversible thermal energy with its internal twin crystals structure. Our experiment shows the M2052 manganese copper alloy material is good enough to suppress image motion below 125 Hz, which is the vibration frequency of satellite platforms. The camera optical system has a higher MTF after suppressing the vibration of the M2052 material than before.

Rhodanine hydrolysis leads to potent thioenolate mediated metallo-β-lactamase inhibition

NASA Astrophysics Data System (ADS)

Brem, Jürgen; van Berkel, Sander S.; Aik, Weishen; Rydzik, Anna M.; Avison, Matthew B.; Pettinati, Ilaria; Umland, Klaus-Daniel; Kawamura, Akane; Spencer, James; Claridge, Timothy D. W.; McDonough, Michael A.; Schofield, Christopher J.

2014-12-01

The use of β-lactam antibiotics is compromised by resistance, which is provided by β-lactamases belonging to both metallo (MBL)- and serine (SBL)-β-lactamase subfamilies. The rhodanines are one of very few compound classes that inhibit penicillin-binding proteins (PBPs), SBLs and, as recently reported, MBLs. Here, we describe crystallographic analyses of the mechanism of inhibition of the clinically relevant VIM-2 MBL by a rhodanine, which reveal that the rhodanine ring undergoes hydrolysis to give a thioenolate. The thioenolate is found to bind via di-zinc chelation, mimicking the binding of intermediates in β-lactam hydrolysis. Crystallization of VIM-2 in the presence of the intact rhodanine led to observation of a ternary complex of MBL, a thioenolate fragment and rhodanine. The crystallographic observations are supported by kinetic and biophysical studies, including 19F NMR analyses, which reveal the rhodanine-derived thioenolate to be a potent broad-spectrum MBL inhibitor and a lead structure for the development of new types of clinically useful MBL inhibitors.

Laser and electron-beam powder-bed additive manufacturing of metallic implants: A review on processes, materials and designs.

PubMed

Sing, Swee Leong; An, Jia; Yeong, Wai Yee; Wiria, Florencia Edith

2016-03-01

Additive manufacturing (AM), also commonly known as 3D printing, allows the direct fabrication of functional parts with complex shapes from digital models. In this review, the current progress of two AM processes suitable for metallic orthopaedic implant applications, namely selective laser melting (SLM) and electron beam melting (EBM) are presented. Several critical design factors such as the need for data acquisition for patient-specific design, design dependent porosity for osteo-inductive implants, surface topology of the implants and design for reduction of stress-shielding in implants are discussed. Additive manufactured biomaterials such as 316L stainless steel, titanium-6aluminium-4vanadium (Ti6Al4V) and cobalt-chromium (CoCr) are highlighted. Limitations and future potential of such technologies are also explored. © 2015 Orthopaedic Research Society. Published by Wiley Periodicals, Inc.

The emissivities of liquid metals at their fusion temperatures

NASA Technical Reports Server (NTRS)

Bonnell, D. W.; Treverton, J. A.; Valerga, A. J.; Margrave, J. L.

1972-01-01

A survey of the literature through 1969 shows an almost total lack of experimental emissivity data for metals in the liquid state. The emissivities for several transition metals and various other metals and compounds in the liquid state at their fusion temperatures have been determined. The technique used involves electromagnetic levitation-induction heating of the materials in an inert atmosphere. The brightness temperature of the liquid phase of the material is measured as the material is heated through fusion. Given a reliable value of the fusion temperature, which is available for most pure substances, one may readily calculate an emissivity for the liquid phase at the fusion temperatures. Even in cases where melting points are poorly known, the brightness temperatures are unique parameters, independent of the temperature scale and measured for a chemically defined system at a fixed point. Better emissivities may be recalculated as better melting point data become available.

Researches concerning influence of magnesium, aluminum and titanium lime on steel desulfurization

NASA Astrophysics Data System (ADS)

Putan, V.; Putan, A.; Josan, A.; Vilceanu, L.

2016-02-01

The paper presents the results of laboratory experiments on steel desulphurisation with slag from the system MgO-Al2O3-TiO2. To determine the influence, on the desulphurisation process, of the titanium oxide added in calcium aluminate slag, we experimented, in the laboratory phase, the steel treatment with a mechanical mixture consisting of lime, aluminous slag and slag obtained from the titanium making process through the aluminothermic technology. The steel melting was carried out in an induction furnace of 10 kg capacity, existent in the "Metallic Melts" laboratory of the Engineering Faculty of Hunedoara. During the research, we aimed to establish correlation equations between the sulphur distribution coefficient and the slag components (MgO, Al2O3, TiO2). The data obtained in the experiments were processed in MATLAB programs, resulting multiple correlation equations, which allowed the elucidation of some physical-chemical phenomena specific to the desulphurisation processes.

Aluminium-gold reference material for the k0-standardisation of neutron activation analysis

NASA Astrophysics Data System (ADS)

Ingelbrecht, C.; Peetermans, F.; De Corte, F.; De Wispelaere, A.; Vandecasteele, C.; Courtijn, E.; D'Hondt, P.

1991-05-01

Gold is an excellent comparator material for the k0-standardisation of neutron activation analysis because of its convenient and well defined nuclear properties. The most suitable form for a reference material is a dilute aluminium-gold alloy, for which the self-shielding effect for neutrons is small. Castings of composition Al-0.1 wt.% Au were prepared by crucible-less levitation melting, which gives close control of ingot composition with minimal contamination of the melt. The alloy composition was checked using induction-coupled plasma source emission spectrometry. The homogeneity of the alloy was measured by neutron activation analysis and a relative standard deviation of the gold content of 0.30% was found (10 mg samples). Metallography revealed a homogeneous distribution of AuAl 2 particles. The alloy was certified as Reference Material CBNM-530, with certified gold mass fraction 0.100±0.002 wt.%.

Additive Manufacturing/Diagnostics via the High Frequency Induction Heating of Metal Powders: The Determination of the Power Transfer Factor for Fine Metallic Spheres

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rios, Orlando; Radhakrishnan, Balasubramaniam; Caravias, George

2015-03-11

Grid Logic Inc. is developing a method for sintering and melting fine metallic powders for additive manufacturing using spatially-compact, high-frequency magnetic fields called Micro-Induction Sintering (MIS). One of the challenges in advancing MIS technology for additive manufacturing is in understanding the power transfer to the particles in a powder bed. This knowledge is important to achieving efficient power transfer, control, and selective particle heating during the MIS process needed for commercialization of the technology. The project s work provided a rigorous physics-based model for induction heating of fine spherical particles as a function of frequency and particle size. This simulationmore » improved upon Grid Logic s earlier models and provides guidance that will make the MIS technology more effective. The project model will be incorporated into Grid Logic s power control circuit of the MIS 3D printer product and its diagnostics technology to optimize the sintering process for part quality and energy efficiency.« less

Enhancement of heat transfer rate on phase change materials with thermocapillary flows

NASA Astrophysics Data System (ADS)

Madruga, Santiago; Mendoza, Carolina

2017-04-01

We carry out simulations of the melting process on the phase change material n-octadecane in squared geometries in the presence of natural convection and including thermocapillary effects. We show how the introduction of thermocapillary effects enhances the heat transfer rate, being the effect especially relevant for small Bond numbers. Thus induction of Marangoni flows results in a useful mechanism to enhance the typical slow heat transfer rate of paraffin waxes in applications of energy storage or passive control management.

Strategies for Learners with Special Needs in Automobile Mechanics.

ERIC Educational Resources Information Center

Missouri Univ., Columbia. Missouri LINC.

This Vocational Instructional Management System (VIMS) module illustrates instructional and cognitive strategies that can be used to teach and learn vocational competencies in automobile mechanics. Seven definitions, seven frequently asked questions, and nine references are included. The following questions are answered: Is it important to teach…

Titan's icy scar

NASA Astrophysics Data System (ADS)

Griffith, C. A.; Penteado, P. F.; Turner, J. D.; Neish, C. D.; Mitri, G.; Montiel, M. J.; Schoenfeld, A.; Lopes, R. M. C.

2017-09-01

We conduct a Principal Components Analysis (PCA) of Cassini/VIMS [1] infrared spectral windows to identify and quantify weak surface features, with no assumptions on the haze and surface characteris- tics. This study maps the organic sediments, supplied by past atmospheres, as well as ice-rich regions that constitute Titan's bedrock.

Geology of the Selk crater region on Titan from Cassini VIMS observations

USGS Publications Warehouse

Soderblom, J.M.; Brown, R.H.; Soderblom, L.A.; Barnes, J.W.; Jaumann, R.; Le Mouélic, Stéphane; Sotin, Christophe; Stephan, K.; Baines, K.H.; Buratti, B.J.; Clark, R.N.; Nicholson, P.D.

2010-01-01

Observations of Titan obtained by the Cassini Visual and Infrared Mapping Spectrometer (VIMS) have revealed Selk crater, a geologically young, bright-rimmed, impact crater located ???800. km north-northwest of the Huygens landing site. The crater rim-crest diameter is ???90. km; its floor diameter is ???60. km. A central pit/peak, 20-30. km in diameter, is seen; the ratio of the size of this feature to the crater diameter is consistent with similarly sized craters on Ganymede and Callisto, all of which are dome craters. The VIMS data, unfortunately, are not of sufficient resolution to detect such a dome. The inner rim of Selk crater is fluted, probably by eolian erosion, while the outer flank and presumed ejecta blanket appear dissected by drainages (particularly to the east), likely the result of fluvial erosion. Terracing is observed on the northern and western walls of Selk crater within a 10-15. km wide terrace zone identified in VIMS data; the terrace zone is bright in SAR data, consistent with it being a rough surface. The terrace zone is slightly wider than those observed on Ganymede and Callisto and may reflect differences in thermal structure and/or composition of the lithosphere. The polygonal appearance of the crater likely results from two preexisting planes of weakness (oriented at azimuths of 21?? and 122?? east of north). A unit of generally bright terrain that exhibits similar infrared-color variation and contrast to Selk crater extends east-southeast from the crater several hundred kilometers. We informally refer to this terrain as the Selk "bench." Both Selk and the bench are surrounded by the infrared-dark Belet dune field. Hypotheses for the genesis of the optically bright terrain of the bench include: wind shadowing in the lee of Selk crater preventing the encroachment of dunes, impact-induced cryovolcanism, flow of a fluidized-ejecta blanket (similar to the bright crater outflows observed on Venus), and erosion of a streamlined upland formed in the lee of Selk crater by fluid flow. Vestigial circular outlines in this feature just east of Selk's ejecta blanket suggest that this might be a remnant of an ancient, cratered crust. Evidently the southern margin of the feature has sufficient relief to prevent the encroachment of dunes from the Belet dune field. We conclude that this feature either represents a relatively high-viscosity, fluidized-ejecta flow (a class intermediate to ejecta blankets and long venusian-style ejecta flows) or a streamlined upland remnant that formed downstream from the crater by erosive fluid flow from the west-northwest. ?? 2010 Elsevier Inc.

Composition of Titan's surface from Cassini VIMS

USGS Publications Warehouse

McCord, T.B.; Hansen, G.B.; Buratti, B.J.; Clark, R.N.; Cruikshank, D.P.; D'Aversa, E.; Griffith, C.A.; Baines, E.K.H.; Brown, R.H.; Dalle, Ore C.M.; Filacchione, G.; Formisano, V.; Hibbitts, C.A.; Jaumann, R.; Lunine, J.I.; Nelson, R.M.; Sotin, Christophe

2006-01-01

Titan's bulk density along with Solar System formation models indicates considerable water as well as silicates as its major constituents. This satellite's dense atmosphere of nitrogen with methane is unique. Deposits or even oceans of organic compounds have been suggested to exist on Titan's solid surface due to UV-induced photochemistry in the atmosphere. Thus, the composition of the surface is a major piece of evidence needed to determine Titan's history. However, studies of the surface are hindered by the thick, absorbing, hazy and in some places cloudy atmosphere. Ground-based telescope investigations of the integral disk of Titan attempted to observe the surface albedo in spectral windows between methane absorptions by calculating and removing the haze effects. Their results were reported to be consistent with water ice on the surface that is contaminated with a small amount of dark material, perhaps organic material like tholin. We analyze here the recent Cassini Mission's visual and infrared mapping spectrometer (VIMS) observations that resolve regions on Titan. VIMS is able to see surface features and shows that there are spectral and therefore likely compositional units. By several methods, spectral albedo estimates within methane absorption windows between 0.75 and 5 ??m were obtained for different surface units using VIMS image cubes from the Cassini-Huygens Titan Ta encounter. Of the spots studied, there appears to be two compositional classes present that are associated with the lower albedo and the higher albedo materials, with some variety among the brighter regions. These were compared with spectra of several different candidate materials. Our results show that the spectrum of water ice contaminated with a darker material matches the reflectance of the lower albedo Titan regions if the spectral slope from 2.71 to 2.79 ??m in the poorly understood 2.8-??m methane window is ignored. The spectra for brighter regions are not matched by the spectrum of water ice or unoxidized tholin, in pure form or in mixtures with sufficient ice or tholin present to allow the water ice or tholin spectral features to be discerned. We find that the 2.8-??m methane absorption window is complex and seems to consist of two weak subwindows at 2.7 and 2.8 ??m that have unknown opacities. A ratio image at these two wavelengths reveals an anomalous region on Titan that has a reflectance unlike any material so far identified, but it is unclear how much the reflectances in these two subwindows pertain to the surface. ?? 2006 Elsevier Ltd. All rights reserved.

Phenotypic and genotypic characteristics of carbapenem-resistant Enterobacteriaceae in a tertiary-level reference hospital in Turkey.

PubMed

Baran, Irmak; Aksu, Neriman

2016-04-06

Enterobacteriaceae are among the most common pathogens that are responsible for serious community-acquired, hospital-acquired, and health-care associated infections. The emergence and spread of carbapenem-resistant Enterobacteriaceae (CRE) have become an increasing concern for healthcare services worldwide. Infections caused by these bacteria have been associated with significant morbidity and mortality and treatment options have been limited. The rapid and accurate detection of carbapenem resistance in these bacteria is important for infection control. The aim of this study was to investigate the phenotypic and genotypic features of CRE strains isolated in a tertiary-level reference hospital in Turkey. A total of 181 CRE strains were included in the study. Antimicrobial susceptibility rates were tested using Vitek 2 system. Modified Hodge test (MHT) was performed using meropenem and ertapenem discs. Metallo-β-lactamase antimicrobial gradient test (E-test MBL strips) were used for evaluation of metallo-β-lactamase production. A multiplex PCR was used for detection of carbapenems resistance genes (IMP, VIM, KPC, NDM-1 and OXA-48). The OXA-48 gene was detected in 86 strains, NDM-1 gene in six strains, VIM gene in one strain. IMP and KPC genes were not identified. Three strains produced both OXA-48 and NDM-1 and one strain produced both OXA-48 and VIM. In two patients more than one genus of OXA-48 positive CREs was isolated. Ninety-two of the isolates were multidrug-resistant. One hundred and ten isolates were MHT with meropenem (MEM-MHT) positive and 109 isolates were MHT with ertapenem (ERT-MHT) positive. Nine of the isolates were positive with E-test MBL strips. The sensitivity of MEM-MHT and ERT-MHT for detection of OXA-48 was 70.9 and 70.6 %, respectively. MEM-MHT was found highly discriminative for OXA-48 Escherichia coli (p < 0.001). The sensitivity of E-test MBL for NDM-1 was 66.7 %. A statistically significant correlation was observed between OXA-48 gene and MHT positivity and between NDM-1, VIM gene and E-test MBL positivity (p < 0.001). OXA-48 gene is spreading rapidly to many different species of Enterobacteriaceae in the hospital environment. While OXA-48 is still the most common source of carbapenem resistance in Enterobacteriaceae in our country, NDM-1 is increasingly being isolated from patients without a history of foreign contact.

Phenotypic and Genetic Characterization of Carbapenemase and ESBLs Producing Gram-negative Bacteria (GNB) Isolated from Patients with Cystic Fibrosis (CF) in Tehran Hospitals

PubMed Central

Vali, Parisa; Shahcheraghi, Fereshteh; Seyfipour, Maryam; Zamani, Maryam Alsadat; Allahyar, Mohammad Reza; Feizabadi, Mohammad Mehdi

2014-01-01

Background: Cystic Fibrosis (CF) is an autosomal recessive genetic disorder in white populations caused by mutation in a gene that encodes Cystic Fibrosis Transmembrane Conductance Regulator (CFTR) protein. Since frequent respiratory tract infections are the major problem in patients with CF, obligation to identify the causative bacteria and determining their antibiotic resistance pattern is crucial. The purpose of this project was to detect Gram-negative bacteria (GNB) isolated from sputa of CF patients and to determine their antibiotic resistance pattern. Materials and Methods: The sputum of 52 CF patients, treated as inpatients at hospitals in Tehran, was obtained between November 2011 and June 2012. Samples cultured in selective and non-selective media and GNB recognized by biochemical tests. Antimicrobial susceptibility testing to cephalosporins, aminoglycosides and carbapenems was performed by disk diffusion method and MICs of them were measured. For phenotypic detection of carbapenemase and ESBLs production, the Modified Hodge test, double disk synergy test and the combined disk methods were performed. Subsequently, the genes encoding the extended spectrum beta-lactamases (blaPER, blaCTX-M) and carbapenemases (blaIMP-1, blaGES, blaKPC, blaNDM, blaVIM-1, blaVIM-2, blaSPM, blaSIM) in Gram negative bacteria were targeted among the resistant isolates by using PCR. PFGE was used to determine any genetic relationship among the Pseudomonas aeruginosa isolated from these patients. Results: Fifty five GNB were isolated from 52 sputum samples including Pseudomonas aeruginosa, Klebsiella ozaenae, Alcaligenes xylosoxidans, Achromobacter denitrificans, Klebsiella pneumonia and Stenotrophomonas maltophilia. The rates of resistance to different antibiotic were as follows: cefixime (%80), ceftriaxone (%43), ceftazidime (%45) and meropenem (%7). The prevalence of genes encoding the ESBLs and Carbapenemases among the the phenotypically positive strains were as follows: blaCTX-M (19), blaIMP-1 (2), blaVIM-1 (2) and blaVIM-2 (3) genes respectively. No other genes were detected. PFGE analysis revealed 8 genotypes. Six isolates had mutually 3 similar patterns. Conclusion: This study showed the existence of important ESBLs and carbapenemases genes among the GNB isolated from patients with CF. Continuous surveillance of ESBLs and Carbapenemases, also identification of their types, in bacteria isolated from these patients have an important clinical impact, since, it can often provide valuable information for effective infection control measures and for the choice of appropriate antimicrobial therapy. PMID:24596716

Rapid prototyped porous nickel–titanium scaffolds as bone substitutes

PubMed Central

Hoffmann, Waldemar; Bormann, Therese; Rossi, Antonella; Müller, Bert; Schumacher, Ralf; Martin, Ivan; Wendt, David

2014-01-01

While calcium phosphate–based ceramics are currently the most widely used materials in bone repair, they generally lack tensile strength for initial load bearing. Bulk titanium is the gold standard of metallic implant materials, but does not match the mechanical properties of the surrounding bone, potentially leading to problems of fixation and bone resorption. As an alternative, nickel–titanium alloys possess a unique combination of mechanical properties including a relatively low elastic modulus, pseudoelasticity, and high damping capacity, matching the properties of bone better than any other metallic material. With the ultimate goal of fabricating porous implants for spinal, orthopedic and dental applications, nickel–titanium substrates were fabricated by means of selective laser melting. The response of human mesenchymal stromal cells to the nickel–titanium substrates was compared to mesenchymal stromal cells cultured on clinically used titanium. Selective laser melted titanium as well as surface-treated nickel–titanium and titanium served as controls. Mesenchymal stromal cells had similar proliferation rates when cultured on selective laser melted nickel–titanium, clinically used titanium, or controls. Osteogenic differentiation was similar for mesenchymal stromal cells cultured on the selected materials, as indicated by similar gene expression levels of bone sialoprotein and osteocalcin. Mesenchymal stromal cells seeded and cultured on porous three-dimensional selective laser melted nickel–titanium scaffolds homogeneously colonized the scaffold, and following osteogenic induction, filled the scaffold’s pore volume with extracellular matrix. The combination of bone-related mechanical properties of selective laser melted nickel–titanium with its cytocompatibility and support of osteogenic differentiation of mesenchymal stromal cells highlights its potential as a superior bone substitute as compared to clinically used titanium. PMID:25383165

Crucible-free pulling of germanium crystals

NASA Astrophysics Data System (ADS)

Wünscher, Michael; Lüdge, Anke; Riemann, Helge

2011-03-01

Commonly, germanium crystals are grown after the Czochralski (CZ) method. The crucible-free pedestal and floating zone (FZ) methods, which are widely used for silicon growth, are hardly known to be investigated for germanium. The germanium melt is more than twice as dense as liquid silicon, which could destabilize a floating zone. Additionally, the lower melting point and the related lower radiative heat loss is shown to reduce the stability especially of the FZ process with the consequence of a screw-like crystal growth. We found that the lower heat radiation of Ge can be compensated by the increased convective cooling of a helium atmosphere instead of the argon ambient. Under these conditions, the screw-like growth could be avoided. Unfortunately, the helium cooling deteriorates the melting behavior of the feed rod. Spikes appear along the open melt front, which touch on the induction coil. In order to improve the melting behavior, we used a lamp as a second energy source as well as a mixture of Ar and He. With this, we found a final solution for growing stable crystals from germanium by using both gases in different parts of the furnace. The experimental work is accompanied by the simulation of the stationary temperature field. The commercially available software FEMAG-FZ is used for axisymmetric calculations. Another tool for process development is the lateral photo-voltage scanning (LPS), which can determine the shape of the solid-liquid phase boundary by analyzing the growth striations in a lateral cut of a grown crystal. In addition to improvements of the process, these measurements can be compared with the calculated results and, hence, conduce to validate the calculation.

Petrologic evidence for collisional heating of chondritic asteroids

NASA Technical Reports Server (NTRS)

Rubin, Alan E.

1995-01-01

The identification of the mechanism(s) responsible for heating asteroids is among the major problems in planetary science. Because of difficulties with models of electromagnetic induction and the decay of short-lived radionuclides, it is worthwhile to evaluate the evidence for collisional heating. New evidence for localized impact heating comes from the high proportion of relict type-6 material among impact-melt-bearing ordinary chondrites (OC). This relict material was probably metamorphosed by residual heat within large craters. Olivine aggregates composed of faceted crystals with 120 deg triple junctions occur within the melted regions of the Chico and Rose City OC melt rocks; the olivine aggregates formed from shocked, mosaicized olivine grains that underwent contact metamorphism. Large-scale collisional heating is supoorted by the correlation in OC between petrologic type and shock stage; no other heating mechanism can readily account for this correlation. The occurrence of impact-melt-rock clasts in OC that have been metamorphosed along with their whole rocks indicates that some impact events preceded or accompanied thermal metamorphism. Such impacts events, occurring during or shortly after accretion, are probably responsible for substantially melting approximately 0.5% of OC. These events must have heated a larger percentage of OC to subsolidus temperatures sufficient to have caused significant metamorphism. If collisional heating is viable, then OC parent asteroids must have been large; large OC asteroids in the main belt may include those of the S(IV) spectral subtype. Collisional heating is inconsistent with layered ('onion-shell') structures in OC asteroids (wherein the degree of metamorphism increases with depth), but the evidence for such structures is weak. It seems likely that collisional heating played an important role in metamorphosing chondritic asteroids.

Strategies for Learners with Special Needs in Marketing and Distributive Education.

ERIC Educational Resources Information Center

Missouri Univ., Columbia. Missouri LINC.

This Vocational Instructional Management System (VIMS) module addresses general information related to the instructional/teaching strategies and cognitive/learning strategies for special needs students in marketing and distributive education. In addition, specific strategies are suggested as they relate to Access Skills objectives for some of the…

A comparative analysis of protected area planning and management frameworks

Treesearch

Per Nilsen; Grant Tayler

1997-01-01

A comparative analysis of the Recreation Opportunity Spectrum (ROS), Limits of Acceptable Change (LAC), a Process for Visitor Impact Management (VIM), Visitor Experience and Resource Protection (VERP), and the Management Process for Visitor Activities (known as VAMP) decision frameworks examines their origins; methodology; use of factors, indicators, and standards;...

Strategies for Learners with Special Needs in Health Occupations.

ERIC Educational Resources Information Center

Missouri Univ., Columbia. Missouri LINC.

This Vocational Instructional Management System (VIMS) module illustrates instructional and cognitive strategies that can be used to teach special needs students vocational competencies in three areas of health occupations: (1) identification of pulse sites; (2) taking a radial pulse; and (3) converting ounces to cubic centimeters (cc). Three…

Silica-rich orthopyroxenite in the Bovedy chondrite

NASA Technical Reports Server (NTRS)

Ruzicka, Alex; Kring, David A.; Hill, Dolores H.; Boynton, William V.; Clayton, Robert N.; Mayeda, Toshiko K.

1995-01-01

A large (greater than 4.5 x 7 x 4 mm), igneous-textured clast in the Bovedy (L3) chondrite is notable for its high bulk SiO2 content (is approximately equal to 57.5 wt%). The clast consists of normally zoned orthopyroxene (83.8 vol%), tridymite (6.2%), an intergrowth of feldspar (5.8%) and sodic glass (3.1%), pigeonite (1.0%), and small amounts of chromite (0.2%), augite, and Fe,Ni-metal; it is best described as a silica-rich orthopyroxenite. The oxygen-isotopic composition of the clast is similar, but not identical, to Bovedy and other ordinary chondrites. The clast has a superchondritic Si/Mg ratio, but has Mg/(Mg + Fe) and Fe/Mn ratios that are similar to ordinary chondrite silicate. The closest chemical analogues to the clast are radial-pyroxene chondrules, diogenites, pyroxene-silica objects in ordinary chondrites, and silicates in the IIE iron meteorite Weekeroo Station. The clast crystallized from a siliceous melt that cooled fast enough to prevent complete attainment of equilibrium but slow enough to allow nearly complete crystallization. The texture, form, size and composition of the clast suggestion that it is an igneous differentiate from an asteroid or planetesimal that formed in the vicinity of ordinary chondrites. The melt probably cooled in the near-surface region of the parent object. It appears that in the source region of the clast, metallic and silicate partial melt were largely-to-completely lost during a relatively low degree of melting, and that during a higher degree of melting, olivine and low-Ca pyroxene separated from the remaining liquid, which ultimately solidified to form the clast. While these fractionation steps could not have all occurred at the same temperature, they could have been accomplished in a single melting episode, possibly as a result of heating by radionuclides or by electromagnetic induction. Fractionated magmas can also account for other Si-rich objects in chondrites.

Purification of melt-spun metallurgical grade silicon micro-flakes through a multi-step segregation procedure

NASA Astrophysics Data System (ADS)

Martinsen, F. A.; Nordstrand, E. F.; Gibson, U. J.

2013-01-01

Melt-spun metallurgical grade (MG) micron dimension silicon flakes have been purified into near solar grade (SG) quality through a multi-step melting and re-solidification procedure. A wet oxidation-applied thermal oxide maintained the sample morphology during annealing while the interiors were melted and re-solidified. The small thickness of the flakes allowed for near elimination of in-plane grain boundaries, with segregation enhanced accumulation of impurities at the object surface and in the few remaining grain boundaries. A subsequent etch in 48% hydrofluoric acid (HF) removed the impure oxide layer, and part of the contamination at the oxide-silicon interface, as shown by electron dispersive spectroscopy (EDS) and backscattered electron imaging (BEI). The sample grains were investigated by electron back-scattered diffraction (EBSD) after varying numbers of oxidation-annealing-etch cycles, and were observed to grow from ˜5 μm to ˜200 μm. The concentration of iron, titanium, copper and aluminium were shown by secondary ion mass spectroscopy (SIMS) and inductively coupled plasma mass spectroscopy (ICPMS) to drop between five and six orders of magnitude. The concentration of boron was observed to drop approximately one order of magnitude. A good correlation was observed between impurity removal rates and segregation models, indicating that the purification effect is mainly caused by segregation. Deviations from these models could be explained by the formation of oxides and hydroxides later removed through etching.

Quantitative real-time monitoring of multi-elements in airborne particulates by direct introduction into an inductively coupled plasma mass spectrometer

NASA Astrophysics Data System (ADS)

Suzuki, Yoshinari; Sato, Hikaru; Hiyoshi, Katsuhiro; Furuta, Naoki

2012-10-01

A new calibration system for real-time determination of trace elements in airborne particulates was developed. Airborne particulates were directly introduced into an inductively coupled plasma mass spectrometer, and the concentrations of 15 trace elements were determined by means of an external calibration method. External standard solutions were nebulized by an ultrasonic nebulizer (USN) coupled with a desolvation system, and the resulting aerosol was introduced into the plasma. The efficiency of sample introduction via the USN was calculated by two methods: (1) the introduction of a Cr standard solution via the USN was compared with introduction of a Cr(CO)6 standard gas via a standard gas generator and (2) the aerosol generated by the USN was trapped on filters and then analyzed. The Cr introduction efficiencies obtained by the two methods were the same, and the introduction efficiencies of the other elements were equal to the introduction efficiency of Cr. Our results indicated that our calibration method for introduction efficiency worked well for the 15 elements (Ti, V, Cr, Mn, Co, Ni, Cu, Zn, As, Mo, Sn, Sb, Ba, Tl and Pb). The real-time data and the filter-collection data agreed well for elements with low-melting oxides (V, Co, As, Mo, Sb, Tl, and Pb). In contrast, the real-time data were smaller than the filter-collection data for elements with high-melting oxides (Ti, Cr, Mn, Ni, Cu, Zn, Sn, and Ba). This result implies that the oxides of these 8 elements were not completely fused, vaporized, atomized, and ionized in the initial radiation zone of the inductively coupled plasma. However, quantitative real-time monitoring can be realized after correction for the element recoveries which can be calculated from the ratio of real-time data/filter-collection data.

The influence of crystallised Fe3O4 on the magnetic properties of coprecipitation-derived ferrimagnetic glass-ceramics.

PubMed

Bretcanu, O; Spriano, S; Verné, E; Cöisson, M; Tiberto, P; Allia, P

2005-07-01

Ferrimagnetic glass-ceramics are potential candidates for magnetic induction hyperthermia, which is one form of inducing deep-regional hyperthermia, by using a magnetic field. The aim of this work was to analyse the influence of the amount of crystallised magnetite on the magnetic properties of glass-ceramic samples. Thus, two different ferrimagnetic glass-ceramics with the composition of the system Na(2)O-CaO-SiO(2)-P(2)O(5)-FeO-Fe(2)O(3) were prepared by melting at 1500 degrees C for 30 min of the coprecipitation-derived starting products. The X-ray diffraction patterns show the presence of nanometric magnetite crystals in a glassy matrix after cooling from melting temperature. The estimated amount of crystallised magnetite varies between 20 and 45 wt.%, as a function of the chemical composition. The morphology of the crystals was studied by scanning electron micrography and transmission electron micrography. Glass transition temperature and thermal stability were investigated by differential thermal analysis. Magnetic hysteresis cycles were analysed using a vibrating sample magnetometer with a maximum applied field of 17 kOe, at room temperature, in quasi-static conditions. Calorimetric measurements were carried out using a magnetic induction furnace. The power losses estimated from calorimetric measurements under a magnetic field of 40 kA/m and 440 kHz are 65 W/g for the glass-ceramic with lower iron oxides content and 25 W/g for the glass-ceramic with higher iron oxide content.

The effect of CO2 on the water-saturated solidus of K-poor peridotite between 4 and 6 GPa

NASA Astrophysics Data System (ADS)

Dvir, Omri; Kessel, Ronit

2017-06-01

The effect of various amounts of CO2 on the solidus of H2O-CO2-bearing peridotite was examined by determining the composition of H2O-CO2-bearing fluids and melts in equilibrium with garnet peridotite at 4-6 GPa and 900-1100 °C. Two capsules were placed in a rocking multi-anvil apparatus in each experiment. Both capsules contained a fertile peridotite with 10 wt% H2O, one with 1 (CLZ1) and the other with 5 wt% CO2 (CLZ5). In both capsules a diamond trap was placed on one end of the capsule as a fluid/melt trap. The H2O and CO2 content in the fluid or melt trapped in between the diamonds were measured using the quartz-tube-system technique by releasing the volatiles through infrared gas analyzer. The total dissolved solids in these phases were determined using the cryogenic laser-ablation - inductive couple plasma - mass spectrometry technique. The residual lherzolite consists of olivine, orthopyroxene, ±clinopyroxene, garnet, and ±magnesite as carbonate phase. The solidus of CLZ1 peridotite was located between 900 and 1000 °C at 4 GPa and between 1000 and 1100 °C at 5 and 6 GPa. CLZ5 peridotite melts below 900 °C at 4 GPa and between 900 and 1000 °C at 5 and 6 GPa. The results demonstrate a decrease in melting temperature of hydrous peridotite at pressures between 4 and 6 GPa with increasing amount of CO2. The H2O-CO2-bearing fluids found in this study at 900-1000 °C are similar in composition to low-Mg carbonatitic to silicic high-density fluids found in fluid inclusions in diamonds. With increasing temperature, the melts approach type II kimberlites. We propose that H2O-CO2-induced partial melting of metasomatized garnet lherzolite at 4-6 GPa is a possible origin for group II kimberlites.

Safety and efficacy of dual-lead thalamic deep brain stimulation for patients with treatment-refractory multiple sclerosis tremor: a single-centre, randomised, single-blind, pilot trial.

PubMed

Oliveria, Seth F; Rodriguez, Ramon L; Bowers, Dawn; Kantor, Daniel; Hilliard, Justin D; Monari, Erin H; Scott, Bonnie M; Okun, Michael S; Foote, Kelly D

2017-09-01

Efficacy in previous studies of surgical treatments of refractory multiple sclerosis tremor using lesioning or deep brain stimulation (DBS) has been variable. The aim of this study was to investigate the safety and efficacy of dual-lead thalamic DBS (one targeting the ventralis intermedius-ventralis oralis posterior nucleus border [the VIM lead] and one targeting the ventralis oralis anterior-ventralis oralis posterior border [the VO lead]) for the treatment of multiple sclerosis tremor. We did a single centre, single-blind, prospective, randomised pilot trial at the University of Florida Center for Movement Disorders and Neurorestoration clinic (Gainesville, FL, USA). We recruited adult patients with a clinical diagnosis of multiple sclerosis tremor refractory to previous medical therapy. Before surgery to implant both leads, we randomly assigned patients (1:1) to receive 3 months of optimised single-lead DBS-either VIM or VO. We did the randomisation with a computer-generated sequence, using three blocks of four patients, and independent members of the Center did the assignment. Patients and all clinicians other than the DBS programming nurse were masked to the choice of lead. Patients underwent surgery 1 month after their baseline visit for implantation of the dual lead DBS system. A pulse generator and two extension cables were implanted in a second surgery 3-4 weeks later. Patients then received an initial 3-month period of continuous stimulation of either the VIM or VO lead followed by blinded safety assessment of their tremor with the Tolosa-Fahn-Marin Tremor Rating Scale (TRS) during optimised VIM or VO lead stimulation at the end of the 3 months. After this visit, both leads were activated in all patients for an additional 3 months, and optimally programmed during serial visits as dictated by a prespecified programming algorithm. At the 6-month follow-up visit, TRS score was measured, and mood and psychological batteries were administered under four stimulation conditions: VIM on, VO on, both on, and both off (the order of testing was chosen by a computer-generated random sequence, assigned by independent members of the centre, and enacted by an unmasked DBS programming nurse). Each of four stimulation settings were tested over 4 consecutive days, with stimulation settings held constant for at least 12 h before testing. The primary outcome was change in mean total TRS score at the 6-month postoperative assessment with both leads activated, compared with the preoperative baseline mean TRS score. Analysis was by intention to treat. Safety was analysed in all patients who received the surgical implantation except in one patient who discontinued before the safety assessment. This trial is registered with ClinicalTrials.gov, number NCT00954421. Between Jan 16, 2007, and Dec 17, 2013, we enrolled 12 patients who were randomly assigned either to 3 initial months of VIM-only or VO-only stimulation. One patient from the VO-only group developed an infection necessitating DBS explantation, and was excluded from the assessment of the primary outcome. Compared with the mean baseline TRS score of 57·0 (SD 10·2), the mean score at 6 months decreased to 40·1 (17·6), -29·6% reduction; t=-0·28, p=0·03. Three of 11 patients did not respond to surgical intervention. One patient died suddenly 2 years after surgery, but this was judged to be unrelated to DBS implantation. Serious adverse events included a superficial wound infection in one patient that resolved with antibiotic therapy, and transient altered mental status and late multiple sclerosis exacerbation in another patient. The most common non-serious adverse events were headache and fatigue. Dual lead thalamic DBS might be a safe and effective option for improving severe, refractory multiple sclerosis tremor. Larger studies are necessary to show whether this technique is widely applicable, safe in the long-term, and effective in treating multiple sclerosis tremor or other severe tremor disorders. US National Institutes of Health, the Cathy Donnellan, Albert E Einstein, and Birdie W Einstein Fund, and the William Merz Professorship. Copyright © 2017 Elsevier Ltd. All rights reserved.

Primordial heating of asteroidal parent bodies

NASA Technical Reports Server (NTRS)

Sonett, C. P.; Reynolds, R. T.

1979-01-01

Most meteorites show evidence of thermal processing either because of metamorphic changes or as a result of melting and differentiation. Proposed mechanisms for supplying this energy generally rely upon short-lived radioisotopes or electrical induction, though accretion is sometimes mentioned, and more exotic models have been discussed. Interest in isotopic heating has been heightened by the discovery of Al-26 in Allende inclusions and also by the proposal that a lunar core and dynamo resulted from the radioactive decay of superheavy elements during the early solar system. Electrical induction as a heat source can be scaled to a broad range of solar system conditions, but corroborative evidence for these conditions is inconclusive. The accretion mechanism is probably not viable for the asteroidal and meteorite parent bodies, because the high kinetic energy requirement is inconsistent with the formation of the objects and their regoliths in the presence of a weak gravitational field.

Automation of preparation of nonmetallic samples for analysis by atomic absorption and inductively coupled plasma spectrometry

NASA Technical Reports Server (NTRS)

Wittmann, A.; Willay, G.

1986-01-01

For a rapid preparation of solutions intended for analysis by inductively coupled plasma emission spectrometry or atomic absorption spectrometry, an automatic device called Plasmasol was developed. This apparatus used the property of nonwettability of glassy C to fuse the sample in an appropriate flux. The sample-flux mixture is placed in a composite crucible, then heated at high temperature, swirled until full dissolution is achieved, and then poured into a water-filled beaker. After acid addition, dissolution of the melt, and filling to the mark, the solution is ready for analysis. The analytical results obtained, either for oxide samples or for prereduced iron ores show that the solutions prepared with this device are undistinguished from those obtained by manual dissolutions done by acid digestion or by high temperature fusion. Preparation reproducibility and analytical tests illustrate the performance of Plasmasol.

Liquid-metal flows: Magnetohydrodynamics and applications; Proceedings of the Fifth Beersheba International Seminar on Magnetohydrodynamic Flows and Turbulence, University of the Negev, Beersheba, Israel, Mar. 2-6, 1987

DOE Office of Scientific and Technical Information (OSTI.GOV)

Branover, H.; Mond, M.; Unger, Y.

The present collection of papers on MHD-related uses of liquid metal flows and their applications discusses topics in laminar MHD flows, MHD power generation, metallurgical MHD applications, and two-phase MHD flows. Attention is given to MHD flows with closed streamlines, nonlinear waves in liquid metals under a transverse magnetic field, liquid-metal MHD conversion of nuclear energy to electricity, the testing of optimized MHD conversion (OMACON) systems, and aspects of a liquid-metal induction generator. Also discussed are MHD effects in liquid-metal breeder reactors, a plasma-driven MHD powerplant, modeling the recirculating flows in channel-induction surfaces, the hydrodynamics of aluminum reduction cells, free-surfacemore » determination in a levitation-melting process, the parametric interactions of waves in bubbly liquid metals, and the occurrence of cavitation in water jets.« less

What heated the parent meteorite planets?

NASA Technical Reports Server (NTRS)

Wood, John A.; Pellas, Paul

1991-01-01

The plausibility of the two most wide discussed mechanisms, decay of short-lived Al-26 and solar wind induction heating, for heating the small planetesimals in which the meteorites formed are examined and shown to have significant problems. The main problem for the Al-26 decay mechanism is the fact that eucritic lavas, melted by the mysterious heating mechanism in some early planetesimal, did not contain enough Al-26 to decay to radiogenic Mg-26 when they erupted to their planetesimal surface and cooled. It is necessary to postulate that the lavas lingered underground while their Al-26 decayed away. The solar wind induction heat concept has the problem that astrophysical evidence has made is seem increasingly unlikely that an intense solar wind flux blew past planetesimals in the early solar system. Instead, it was probably collimated in the direction of the sun's poles by the persistence of the solar nebula during the T Tauri epoch.

Metallurgical technologies, energy conversion, and magnetohydrodynamic flows

NASA Astrophysics Data System (ADS)

Branover, Herman; Unger, Yeshajahu

The present volume discusses metallurgical applications of MHD, R&D on MHD devices employing liquid working medium for process applications, electromagnetic (EM) modulation of molten metal flow, EM pump performance of superconducting MHD devices, induction EM alkali-metal pumps, a physical model for EM-driven flow in channel-induction furnaces, grain refinement in Al alloys via EM vibrational method, dendrite growth of solidifying metal in dc magnetic field, MHD for mass and heat transfer in single-crystal melt growth, inverse EM shaping, and liquid-metal MHD development in Israel. Also discussed are the embrittlement of steel by lead, an open cycle MHD disk generator, the acceleration of gas-liquid piston flows for molten-metal MHD generators, MHD flow around a cylinder, new MHD drag coefficients, liquid-metal MHD two-phase flow, and two-phase liquid gas mixers for MHD energy conversion. (No individual items are abstracted in this volume)

Cation and anion dependence of stable geometries and stabilization energies of alkali metal cation complexes with FSA(-), FTA(-), and TFSA(-) anions: relationship with physicochemical properties of molten salts.

PubMed

Tsuzuki, Seiji; Kubota, Keigo; Matsumoto, Hajime

2013-12-19

Stable geometries and stabilization energies (Eform) of the alkali metal complexes with bis(fluorosulfonyl)amide, (fluorosulfonyl)(trifluoromethylslufonyl)amide and bis(trifluoromethylsulfonyl)amide (FSA(-), FTA(-) and TFSA(-)) were studied by ab initio molecular orbital calculations. The FSA(-) complexes prefer the bidentate structures in which two oxygen atoms of two SO2 groups have contact with the metal cation. The FTA(-) and TFSA(-) complexes with Li(+) and Na(+) prefer the bidentate structures, while the FTA(-) and TFSA(-) complexes with Cs(+) prefer tridentate structures in which the metal cation has contact with two oxygen atoms of an SO2 group and one oxygen atom of another SO2 group. The two structures are nearly isoenergetic in the FTA(-) and TFSA(-) complexes with K(+) and Rb(+). The magnitude of Eform depends on the alkali metal cation significantly. The Eform calculated for the most stable TFSA(-) complexes with Li(+), Na(+), K(+), Rb(+) and Cs(+) cations at the MP2/6-311G** level are -137.2, -110.5, -101.1, -89.6, and -84.1 kcal/mol, respectively. The viscosity and ionic conductivity of the alkali TFSA molten salts have strong correlation with the magnitude of the attraction. The viscosity increases and the ionic conductivity decreases with the increase of the attraction. The melting points of the alkali TFSA and alkali BETA molten salts also have correlation with the magnitude of the Eform, which strongly suggests that the magnitude of the attraction play important roles in determining the melting points of these molten salts. The anion dependence of the Eform calculated for the complexes is small (less than 2.9 kcal/mol). This shows that the magnitude of the attraction is not the cause of the low melting points of alkali FTA molten salts compared with those of corresponding alkali TFSA molten salts. The electrostatic interactions are the major source of the attraction in the complexes. The electrostatic energies for the most stable TFSA(-) complexes with the five alkali metal cations are -140.3, -119.4, -104.1, -96.9, and -91.1 kcal/mol, respectively. The induction interactions also contribute to the attraction. In particular, the induction interactions are large in the Li(+) complexes. The induction energies for the five complexes are -46.6, -25.2, -17.5, -13.3, and -10.4 kcal/mol, respectively.

Calibrazioni a terra e prestazioni in volo di spettrometri ad immagine nel visibile e nel vicino infrarosso per l'esplorazione planetaria

NASA Astrophysics Data System (ADS)

Filacchione, Gianrico

2006-10-01

Nel corso dell’ultimo decennio l’esplorazione planetaria ha potuto beneficiare dei dati prodotti dagli spettrometri ad immagine: grazie a questa nuova classe di strumenti, realizzati per l’osservazione in remoto di superfici ed atmosfere planetarie, è possibile acquisire dati iperspettrali con elevati poteri risolutivi spaziali e spettrali. Il principale vantaggio offerto dagli spettrometri ad immagine, rispetto alle camere ed agli spettrometri puntuali, è rappresentato dalla capacità di misurare, identificare e mappare le unità composizionali delle superfici planetarie; queste informazioni permettono di investigare sia l’evoluzione geochimica delle superfici sia la dinamica e la composizione delle atmosfere. Sebbene i primi spettrometri ad immagine siano stati francesi (Phobos/ISM, Imaging Spectrometer for Mars) e statunitensi (Galileo/NIMS, Near Infrared Mapping Spectrometer), il nostro paese nel corso degli ultimi anni è stato in grado di proporre alla com unità spaziale internazionale degli strumenti dalle elevate prestazioni che sono stati infatti accettati come payload scientifici su diverse missioni interplanetarie: dai canali visibili di VIMS (Visual and Infrared Mapping Spectrometer) su Cassini (Nasa, JPL, ESA, ASI) e di OMEGA (Observatoire pour la Minéralogie, l’Eau, les Glacies et l’Activitè de Mars) su MarsExpress (ESA) ai due VIRTIS (Visible and Infrared Thermal Imaging Spectrometer) su Rosetta (ESA) e VenusExpress (ESA) fino a VIR-MS (Visible and Infrared Mapping Spectrometer) su Dawn (Nasa). In questo momento inoltre altri due spettrometri sono in avanzata fase di studio: JIRAM (Jovian InfraRed Auroral Mapper) su Juno (missione New Discovery Nasa) e VIHI (Visible and Infrared Hyperspectral Imager) integrato nel payload italiano di remote sensing SIMBIO-SYS di BepiColombo (missione cornerstone ESA). La realizzazione di uno spettrometro ad immagini da utilizzare su una missione interplanetaria richiede un’accurata analisi in fase progettuale e realizzativa dei parametri e de lle prestazioni strumentali; in generale infatti non solo sarà necessario mantenere le dimensioni, il peso, i consumi elettrici ed il data-volume entro i requisiti disponibili del satellite ma anche ottimizzare i disegni ottici, meccanici ed elettronici al fine di ottenere le massime prestazioni possibili in funzione della natura del target osservato e dei parametri orbitali della missione. Questa tesi descrive i metodi utilizzati per caratterizzare il funzionamento di spettrometri ad immagine per l’esplorazione planetaria. L’attività svolta ha riguardato sia la misura in laboratorio dei parametri strumentali fondamentali sia l’analisi dei dati in volo su cui verificarne ed eventualmente correggerne la risposta. Il funzionamento degli strumenti e la metodologia di calibrazione vengono descritti nelle due parti principali e nelle appendici di questa tesi per gli esperimenti Cassini-VIMS-V e Rosetta-VIRTIS-M. La prima parte è dedicata all’esperimento VIMS-V sul satellite Cassini, il cui disegno ottico, originariamente proposto da Francis Reininger, verrà successivamente riutilizzato e perfezionato su VIRTIS-M (Reininger et al., 1994; Miller et al., 1996). Il capitolo 1 contiene una descrizione dei parametri ottici, strutturali, termici ed elettronici di VIMS-V mettendone in risalto gli aspetti più innovativi del progetto. Vengono inoltre descritti la collocazione dell’esperimento sul satellite Cassini, il coallineamento con gli altri strumenti di remote sensing, i possibili modi operativi ed il formato dei dati scientifici. Il capitolo 2 riguarda il processo di calibrazione ed analisi dei dati in volo di VIMS-V. La procedura eseguita per calibrare radiometricamente lo strumento utilizzando i dati della superficie della Luna e per stimare il flat-field mediante i dati dell’atmosfera di Venere viene dettagliatamente descritta assieme agli algoritmi utilizzati per la rimozione di diversi effetti strumentali (read-out noise e tilt spettrale); alcuni di questi effetti sono stati caratterizzati e dettagliamente misurati in laboratorio utilizzando il modello spare (flight) di VIMS-V. Parte del capitolo è dedicata alla verifica della procedura di calibrazione su diversi target aventi caratteristiche spettroradiometriche note. Questi algoritmi di processamento sono correntemente utilizzati dal team scientifico di VIMS per calibrare i dati del canale -VIS rilasciati ufficialmente alla comunità scientifica internazionale attraverso il Planetary Data System (PDS) della Nasa. La seconda parte riguarda l’esperimento VIRTIS-M sul satellite Rosetta. Il capitolo 3 contiene la descrizione dello strumento mettendo in risalto l’evoluzione dal precedente progetto VIMS-V ed i problemi tecnologici e costruttivi da questo derivanti. I diversi modi operativi, la sequenza di acquisizione e di processamento dei dati nell’elettronica principale sono ampiament e discussi. Viene inoltre evidenziata la collocazione dello spettrometro sul satellite Rosetta. Nel capitolo 4 viene descritta l’attività di calibrazione effettuata in Galileo Avionica (Campi Bisenzio, FI, Italia) ed allo IAS (Orsay, Francia) subito dopo l’integrazione di VIRTIS ed il conseguente processamento dei dati necessario per ricavare i principali parametri di funzionamento (calibrazioni spettrali e geometriche, flat-field, funzioni di trasferimento, lampade di calibrazione interne). Nel capitolo 5 l’accuratezza di queste grandezze è stata verificata su i primi dati in volo ottenuti da VIRTIS-M durante la fase di commissioning e di cruise del satellite (Terra, Luna e Saturno); queste osservazioni sono inoltre state utilizzate per migliorare e verificare alcuni aspetti della procedura di calibrazione che non erano stati sufficientemente definiti durante i test a terra. L’appendice A riguarda il formato PDS (Planetary Data System) utilizzato per l’archiviazione dei dati e degli housekeepings ingegnerisitici e scientifici delle osservazioni; nell’appendice B è contenuta la descrizione del modello radiometrico teorico di VIRTIS-M utilizzato per stimare il rapporto segnale/rumore; nelle appendici C e D sono infine contenute diverse Tabelle non incluse nel testo delle parti principali a causa della loro lunghezza.

Introduction to Animal Nutrition. Instructor Guide [and] Student Reference. Volume 28, Number 7 [and] Volume 28, Number 8.

ERIC Educational Resources Information Center

Peiter, Andrea; And Others

This instructor guide and the corresponding student reference contain five lessons about animal science for inclusion in Vocational Instructional Management System (VIMS) agricultural education courses. The lessons cover these topics: the monogastric digestive system, the ruminant digestive system, the importance of meeting nutritional needs, how…

Electronics. Criterion-Referenced Test (CRT) Item Bank.

ERIC Educational Resources Information Center

Davis, Diane, Ed.

This document contains 519 criterion-referenced multiple choice and true or false test items for a course in electronics. The test item bank is designed to work with both the Vocational Instructional Management System (VIMS) and the Vocational Administrative Management System (VAMS) in Missouri. The items are grouped into 15 units covering the…

Auto Mechanics. Criterion-Referenced Test (CRT) Item Bank.

ERIC Educational Resources Information Center

Tannehill, Dana, Ed.

This document contains 546 criterion-referenced multiple choice and true or false test items for a course in auto mechanics. The test item bank is designed to work with both the Vocational Instructional Management System (VIMS) and Vocational Administrative Management System (VAMS) in Missouri. The items are grouped into 35 units covering the…

Near-Infrared Spectroscopy of Himalia An Irregular Jovian Satellite

NASA Technical Reports Server (NTRS)

Brown, R. H.; Baines, K.; Bellucci, G.; Bibring, J.-P.; Buratti, B.; Capaccioni, F.; Cerroni, P.; Clark, R.; Coradini, A.; Cruikshank, D.

2002-01-01

Spectra of the irregular Jovian satellite Himalia were obtained with the Visual and Infrared Mapping Spectrometer (VIMS) onboard Cassini during the Jupiter Flyby on December 18-19, 2000. These are the first spectral data of an irregular satellite beyond 2.5 microns. Additional information is contained in the original extended abstract.

Coordination-Supported Imidazolate Networks: Water- and Heat-Stable Mesoporous Polymers for Catalysis.

PubMed

Zhang, Pengfei; Yang, Shize; Chisholm, Matthew F; Jiang, Xueguang; Huang, Caili; Dai, Sheng

2017-07-26

The poor water stability of most porous coordination polymers (PCPs) or metal-organic frameworks (MOFs) is widely recognized as a barrier hampering their practical applications. Here, a facile and scalable route to prepare metal-containing polymers with a good stability in boiling water (100 °C, 24 h) and air (up to 390 °C) is presented. The bifunctional 1-vinylimidazole (VIm) with a coordinating site and a polymerizable organic group is introduced as the building block. This core strategy includes the synthesis of a rigid monomer with four VIm branches through a coordination process at room temperature, followed by a radical polymerization. We refer to this material as coordination-supported imidazolate networks (CINs). Interestingly, CINs are composed of rich mesopores from 2-15 nm, as characterized by low-energy (60 kV) STEM-HAADF images. In particular, the stable CINs illustrate a high turnover frequency (TOF) of 779 h -1 in the catalytic oxidation of phenol with H 2 O as the green solvent. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Identification and characteristics of imipenem-resistant Acinetobacter baumannii in surgical wards in a Chinese university hospital.

PubMed

Wang, Dalin; Ma, Linlin; Wu, Zhenyu; Li, Mingcheng; Li, Xiaohan; Zhang, Wei; Chen, Kun

2015-03-01

The aim of this study was to investigate the prevalence and characteristics of imipenem-resistant Acinetobacter baumanni isolated from surgical wards in a university hospital, China. A total of 143 non-duplicate A. baumannii were isolated from 517 inpatients in surgery intensive care units (ICUs), burn wards, and general surgery wards. Of these, 102 isolates of A. baumannii (71.3%) were resistant to imipenem. Among imipenem-resistant isolates, all isolates were resistant to almost all antimicrobial agents except polymyxin E, all isolates were positive for blaOXA-23 and blaOXA-51 in addition to ISAba1, 52 (51%) were positive for blaOXA-58, 8 (7.8%) contained blaVIM-2, which co-harbored with blaOXA-58. Molecular typing revealed the presence of three clones among imipenem-resistant isolates. This study confirmed that A. baumannii strains harboring OXA or VIM type β-lactamases are widely distributed throughout the surgery wards. The data demonstrate that there was a high prevalence of imipenem-resistant A. baumannii infection in the region.

Dopant occupancy and exposure energy in Hf:Nd:LiNbO3 crystal as a function of [Li]/[Nb] ratios

NASA Astrophysics Data System (ADS)

Dai, Li; Liu, Chunrui; Han, Xianbo; Yan, Zhehua; Tan, Chao; Wang, Luping; Xu, Yuheng

2017-09-01

A series of Hf: Nd: LiNbO3 crystals with various [Li]/[Nb] ratios ([Li]/[Nb] = 0.94, 1.05, 1.20, 1.38) in the melt were grown by conventional Czochralski technique. The distribution coefficients of Hf4+ and Nd3+ ions were recorded by an inductively coupled plasma-atomic emission spectrometer (ICP-AES). The effective distribution coefficient of Hf4+ is reduced and that of Nd3+ is increased with the increase of [Li]/[Nb] ratio in the melts. In all cases, the effective distribution coefficients is less than 1. The IR transmission spectroscopy of the Hf: Nd: LiNbO3 crystals were measured, getting the results that Hf: Yb: Ho: LiNbO3 crystals with 1.05 [Li]/[Nb] ratios was the stoichiometric. The optical damage resistance ability of Hf:Nd:LiNbO3 crystals were studied by light-induced scattering exposure energy flux threshold method and it increases with the increasing of [Li]/[Nb] ratios. When the [Li]/[Nb] ratio is 1.38 in the melt (the sample 4#), the exposure energy achieves 687.35 J/cm2, approximately 441 folds than that of the sample 1# ([Li]/[Nb] = 0.94) in magnitude.

Dephosphorization of complexly alloyed nickel melts under vacuum induction melting conditions: II. Experimental results and their interpretation

NASA Astrophysics Data System (ADS)

Burtsev, V. T.; Anuchkin, S. N.; Sidorov, V. V.; Rigin, V. E.

2013-05-01

The activities of the components of BaO-BaF2-BaCl2-NiO and CaO-CaF2-CaCl2-NiO slags systems, which were considered as a phase having a collective electron system, are calculated, and it is shown that the barium, calcium, and oxygen activities at 1600°C are maximal in the BaO- and CaO-based systems depending on the main oxide content. The dephosphorization of three types of nickel-based melts by slags of 14 compositions in crucibles made of Al2O3, MgO, and MgO-Al2O3 (80-20 wt %) is experimentally studied, and the degree of dephosphorization is shown to depend on the phosphorus content in a metal, the slag composition, and the crucible material (degree of dephosphorization is maximal in Al2O3 crucibles). The forming slag is assimilated by Al2O3 and MgO-Al2O3 ceramics with a porosity of about 30%. If 4-10 wt % NiO are present in a slag, the wettability of the Al2O3 ceramic is significantly higher than that of the MgO-based ceramic.

Microhardness variation and related microstructure in Al-Cu alloys prepared by HF induction melting and RF sputtering

NASA Astrophysics Data System (ADS)

Boukhris, N.; Lallouche, S.; Debili, M. Y.; Draissia, M.

2009-03-01

The materials under consideration are binary aluminium-copper alloys (10 at% to 90.3 at%Cu) produced by HF melting and RF magnetron sputtering. The resulting micro structures have been observed by standard metallographic techniques, X-ray powder diffraction, scanning electron microscopy and transmission electron microscopy. Vickers microhardness of bulk Al-Cu alloys reaches a maximum of 1800 MPa at 70.16 at%Cu. An unexpected metastable θ ' phase has been observed within aluminium grain in Al-37 at%Cu. The mechanical properties of a family of homogeneous Al{1-x}Cu{x} (0 < x < 0.92) thin films made by radiofrequency (13.56 MHz) cathodic magnetron sputtering from composite Al-Cu targets have been investigated. The as-deposited microstructures for all film compositions consisted of a mixture of the two expected face-centred-cubic (fcc) Al solid solution and tetragonal θ (Al{2}Cu) phases. The microhardness regularly increases and the grain size decreases both with copper concentration. This phenomenon of significant mechanical strengthening of aluminium by means of copper is essentially due to a combination between solid solution effects and grain size refinement. This paper reports some structural features of different Al-Cu alloys prepared by HF melting and RF magnetron on glass substrate sputtering.

Lead isotopic composition of trinitite melt glass: evidence for the presence of Canadian industrial lead in the first atomic weapon test.

PubMed

Bellucci, Jeremy J; Simonetti, Antonio; Wallace, Christine; Koeman, Elizabeth C; Burns, Peter C

2013-08-06

The Pb isotopic compositions for 51 spots of melt glass in 11 samples of trinitite have been determined by laser ablation multicollector inductively coupled plasma mass spectrometry (LA-MC-ICP-MS). Trinitite glass yields a large range of Pb isotopic compositions (i.e., (206)Pb/(204)Pb = 17.08-19.04), which reflect mixing between industrial Pb from materials used in the Trinity test and natural geologic components. Areas within trinitite melt glass containing high concentrations of both Cu and Pb, which are derived from the bomb and blast site-related components, were used for delineating the Pb isotopic composition corresponding to the anthropogenic Pb component. Comparison between the isotopic composition estimated here for the industrial Pb used in the Trinity test and those from known Pb deposits worldwide indicates close agreement with ore from the Buchans mine (Newfoundland, Canada). The Buchans mine was active during the time of the Trinity test and was operated by the American Smelting and Refining Company, which could have provided the Pb used in the test. The industrial Pb used in the Trinity test materials is not documented in the literature (or declassified) but could have been present in bricks, solder, pigs, or some other anthropogenic component related to the experiment.

The directional crystallization of W-B-C- d-transition metal alloys

NASA Astrophysics Data System (ADS)

Paderno, Yuriy; Paderno, Varvara; Liashchenko, Alfred; Filipov, Volodymyr; Evdokimova, Alina; Martynenko, Anna

2006-09-01

Crystallization from the melt during arc melting and directional solidification during induction zone melting of pseudo-alloys tungsten carbide (WC)- MeB 2 ( Me—Ti, Zr, Cr) and a number of alloys of the W-B-C system (WB 0.12C 0.74; WB 0.25C 0.75; WB 0.34C 0.32; WB 0.49C 0.76; WB 0.59C 0.76; WB 0.89C 0.75; (WC) 0.9B 0.1) has been studied. It was shown that the alloys WC—80 mass%-ZrB 2—20 mass% and WC—72 mass%-WB—28 mass% are the closest ones to eutectic compositions. Investigation of the microstructure of eutectic alloys in the WC-WB system by thin foil method has revealed that both matrix and reinforcing phases are single crystalline. Hardness tests by indentation of the eutectic structure area ( P=10.3 N) do not result in radial crack formation, which is evidence of the essential plasticity of the obtained composite material. It is established that new ceramic-ceramic eutectic composite materials based on WC with transition metal diborides and with a boride phase of tungsten may be created. Such materials can be successfully applied in contemporary high-temperature techniques.

Welding wire selection critical to jet engine repair work

NASA Astrophysics Data System (ADS)

1992-11-01

A review is provided of issues related to the selection of welding wire for aircraft gas-turbine engines emphasizing the importance of cleanliness in the welding wire product. A three-step metallurgical control process is described for the production of welding wire that is clean and suitable for turbine repair. The process is based on: (1) vacuum induction melting; (2) contamination-free processing of the wire; and (3) environmentally controlled packaging. Weld work on aerospace casting is shown to be useful and suitable for many alloy and superalloy materials with various filler materials.

Effect of Yttrium on the Microstructure and Properties of Pt-Ir Electrical Contact Materials

NASA Astrophysics Data System (ADS)

Wang, Saibei; Sun, Yong; Wang, Song; Peng, Mingjun; Liu, Manmen; Duan, Yonghua; Chen, Yongtai; Yang, Youcai; Chen, Song; Li, Aikun; Xie, Ming

2017-10-01

The Pt-10Ir and Pt-10Ir-1Y were prepared by high frequency induction melting, then the samples were obtained by powder metallurgy, hot extrusion and drawing. The influence of Y addition on microstructure and electrical contact properties of Pt-10Ir alloy has been investigated by using optical microscopy, SEM, electronic balance and the contact material test system. The results show that the addition of Y leads to the micro-structural refinement and directional change of material transfer, but has almost no influence on erosion morphology.

ELECTROMAGNETIC STIRRING IN ZONE REFINING

DOE Office of Scientific and Technical Information (OSTI.GOV)

Braun, I.; Frank, F.C.; Marshall, S.

1958-02-01

The efficiency of the zone refining process can obviously be increased by stirring the molten zone to disperse the impurity-rich layer at the solid- liquid surface. Induction heating is sometimes preferred to radiant heat because it produces more convection, but no marked improvement has been reported. Pfann and Dorsi(1967) have described a method of stirring the melt by passing an electric current through the ingot and compressing a magnetic field across the molten zone. Preliminary results obtained by using a rotating magnetic field us the stirring agent during the purification of aluminum are described. (A.C.)

Composition and methods of preparation of target material for producing radionuclides

DOEpatents

Seropeghin, Yurii D; Zhuikov, Boris L

2013-05-28

A composition suitable for use as a target containing antimony to be irradiated by accelerated charged particles (e.g., by protons to produce tin-117m) comprises an intermetallic compound of antimony and titanium which is synthesized at high-temperature, for example, in an arc furnace. The formed material is powdered and melted in an induction furnace, or heated at high gas pressure in gas static camera. The obtained product has a density, temperature stability, and heat conductivity sufficient to provide an appropriate target material.

Topology evolution and gelation mechanism of agarose gel.

PubMed

Xiong, Jun-Ying; Narayanan, Janaky; Liu, Xiang-Yang; Chong, Tan Kok; Chen, Shing Bor; Chung, Tai-Shung

2005-03-31

Kinetics as well as the evolution of the agarose gel topology is discussed, and the agarose gelation mechanism is identified. Aqueous high melting (HM) agarose solution (0.5% w/v) is used as the model system. It is found that the gelation process can be clearly divided into three stages: induction stage, gelation stage, and pseudoequilibrium stage. The induction stage of the gelation mechanism is identified using an advanced rheological expansion system (ARES, Rheometric Scientific). When a quench rate as large as 30 deg C/min is applied, gelation seems to occur through a nucleation and growth mechanism with a well-defined induction time (time required for the formation of the critical nuclei which enable further growth). The relationship between the induction time and the driving force which is determined by the final setting temperature follows the 3D nucleation model. A schematic representation of the three stages of the gelation mechanism is given based on turbidity and rheological measurements. Aggregation of agarose chains is promoted in the polymer-rich phase and this effect is evident from the increasing mass/length ratio of the fiber bundles upon gelation. Continuously increasing pore size during gelation may be attributed to the coagulation of the local polymer-rich phase in order to achieve the global minimum of the free energy of the gelling system. The gel pore size determined using turbidity measurements has been verified by electrophoretic mobility measurements.

Thalamic deep brain stimulation for writer's cramp.

PubMed

Fukaya, Chikashi; Katayama, Yoichi; Kano, Toshikazu; Nagaoka, Takafumi; Kobayashi, Kazutaka; Oshima, Hideki; Yamamoto, Takamitsu

2007-11-01

Writer's cramp is a type of idiopathic focal hand dystonia characterized by muscle cramps that accompany execution of the writing task specifically. In this report, the authors describe the clinical outcome after thalamic deep brain stimulation (DBS) therapy in patients with writer's cramp and present an illustrative case with which they compare the effects of pallidal and thalamic stimulation. In addition to these results for the clinical effectiveness, they also examine the best point and pattern for therapeutic stimulation of the motor thalamus, including the nucleus ventrooralis (VO) and the ventralis intermedius nucleus (VIM), for writer's cramp. The authors applied thalamic DBS in five patients with writer's cramp. The inclusion criteria for the DBS trial in this disorder were a diagnosis of idiopathic writer's cramp and the absence of a positive response to medication. The exclusion criteria included significant cognitive dysfunction, active psychiatric symptoms, and evidence of other central nervous system diseases or other medical disorders. In one of the cases, DBS leads were implanted into both the globus pallidus internus and the VO/VIM, and test stimulation was performed for 1 week. The authors thus had an opportunity to compare the effects of pallidal and thalamic stimulation in this patient. Immediately after the initiation of thalamic stimulation, the neurological deficits associated with writer's cramp were improved in all five cases. Postoperatively all preoperative scale scores indicating the seriousness of the writer's cramp were significantly lower (p < 0.001). In the patient in whom two DBS leads were implanted, the clinical effect of thalamic stimulation was better than that of pallidal stimulation. During the thalamic stimulation, the maximum effect was obtained when stimulation was applied to both the VO and the VIM widely, compared with being applied only within the VO. The authors successfully treated patients with writer's cramp by thalamic DBS. Insofar as they are aware, this is the first series in which writer's cramp has been treated with DBS. Thalamic stimulation appears to be a safe and valuable therapeutic option for writer's cramp.

Titan's aerosol optical properties with VIMS observations at the limb

NASA Astrophysics Data System (ADS)

Rannou, Pascal; Seignovert, Benoit; Le Mouelic, Stephane; Sotin, Christophe

2016-06-01

The study of Titan properties with remote sensing relies on a good knowledge of the atmosphere properties. The in-situ observations made by Huygens combined with recent advances in the definition of methane properties enable to model and interpret observations with a very good accuracy. Thanks to these progresses, we can analyze in this work the observations made at the limb of Titan in order to retrieve information on the haze properties as its vertical profiles but also the spectral behaviour between 0.88 and 5.2 µm. To study the haze layer and more generally the source of opacities in the stratosphere, we use some observation made at the limb of Titan by the VIMS instrument onboard Cassini. We used a model in spherical geometry and in single scattering, and we accounted for the multiple scattering with a parallel plane model that evaluate the multiple scattering source function at the plane of the limb. Our scope is to retrieve informations about the vertical distribution of the haze, its spectral properties, but also to obtain details about the shape of the methane windows to desantangle the role of the methane and of the aerosols. We started our study at the latitude of 55°N, with a image taken in 2006 with a relatively high spatial resolution (for VIMS). Our preliminary results shows the spectral properties of the aerosols are the same whatever the altitude. This is a consequence of the large scale mixing. From limb profile between 0.9 and 5.2 µm, we can probe the haze layer from about 500 km (at 0.9 µm) to the ground (at 5.2 µm). We find that the vertical profile of the haze layer shows three distinct scale heights with transitions around 250 km and 350 km. We also clearly a transition around 70-90 km that may be due to the top of a condensation layer.

Prospective Multicenter Study of Carbapenemase-Producing Enterobacteriaceae from 83 Hospitals in Spain Reveals High In Vitro Susceptibility to Colistin and Meropenem

PubMed Central

Ortega, Adriana; Bartolomé, Rosa; Bou, Germán; Conejo, Carmen; Fernández-Martínez, Marta; González-López, Juan José; Martínez-García, Laura; Martínez-Martínez, Luis; Merino, María; Miró, Elisenda; Mora, Marta; Oliver, Antonio; Pascual, Álvaro; Rodríguez-Baño, Jesús; Ruiz-Carrascoso, Guillermo; Ruiz-Garbajosa, Patricia; Zamorano, Laura; Bautista, Verónica; Pérez-Vázquez, María; Campos, José

2015-01-01

The aim of this study was to determine the impact of carbapenemase-producing Enterobacteriaceae (CPE) in Spain in 2013 by describing the prevalence, dissemination, and geographic distribution of CPE clones, and their population structure and antibiotic susceptibility. From February 2013 to May 2013, 83 hospitals (about 40,000 hospital beds) prospectively collected nonduplicate Enterobacteriaceae using the screening cutoff recommended by EUCAST. Carbapenemase characterization was performed by phenotypic methods and confirmed by PCR and sequencing. Multilocus sequencing types (MLST) were determined for Klebsiella pneumoniae and Escherichia coli. A total of 702 Enterobacteriaceae isolates met the inclusion criteria; 379 (54%) were CPE. OXA-48 (71.5%) and VIM-1 (25.3%) were the most frequent carbapenemases, and K. pneumoniae (74.4%), Enterobacter cloacae (10.3%), and E. coli (8.4%) were the species most affected. Susceptibility to colistin, amikacin, and meropenem was 95.5%, 81.3%, and 74.7%, respectively. The most prevalent sequence types (STs) were ST11 and ST405 for K. pneumoniae and ST131 for E. coli. Forty-five (54.1%) of the hospitals had at least one CPE case. For K. pneumoniae, ST11/OXA-48, ST15/OXA-48, ST405/OXA-48, and ST11/VIM-1 were detected in two or more Spanish provinces. ST11 isolates carried four carbapenemases (VIM-1, OXA-48, KPC-2, and OXA-245), but ST405 isolates carried OXA-48 only. A wide interregional spread of CPE in Spain was observed, mainly due to a few successful clones of OXA-48-producing K. pneumoniae (e.g., ST11 and ST405). The dissemination of OXA-48-producing E. coli is a new finding of public health concern. According to the susceptibilities determined in vitro, most of the CPE (94.5%) had three or more options for antibiotic treatment. PMID:25824224

Titan's aerosol optical properties with VIMS observations at the limb of Titan

NASA Astrophysics Data System (ADS)

Rannou, Pascal; Seignovert, Benoit; Lavvas, Panayotis; Lemouelic, Stéphane; Sotin, Christophe

2015-11-01

The study of Titan properties with remote sensing relies on a good knowledge of the atmosphere properties. The in-situ observations made by Huygens combined with recent advances in the definition of methane properties enable to model and interpret observations with a very good accuracy. Thanks to these progresses, we can analyze in this work the observations made at the limb of Titan in order to retrieve information on the haze properties as its vertical profiles but also the spectral behaviour between 0.88 and 5.2 μm.To study the haze layer and more generally the source of opacities in the stratosphere, we use som observation made at the limbe of Titan by the VIMS instrument onboard Cassini. We used a model in spherical geometry and in single scattering, and we accounted for the multiple scattering with a parallel plane model that evaluate the multiple scattering source function at the plane of the limb.Our scope is to retrieve informations about the vertical distribution of the haze, its spectral properties, but also to obtain details about the shape of the methane windows to disantangle the role of the methane and of the aerosols.We started our study at the latitude of 55°N, with a image taken in 2006 with a relatively high spatial resolution (for VIMS). Our preliminary results shows the spectral properties of the aerosols are the same whatever the altitude. This is a consequence of the large scale mixing. From limb profile between 0.9 and 5.2 μm, we can probe the haze layer from about 500 km (at 0.9 μm) to the ground (at 5.2 μm). We find that the vertical profile of the haze layer shows three distinct scale heights with transitions around 250 km and 350 km. We also clearly a transition around 70-90 km that may be due to the top of a condensation layer.

Beta oscillatory neurons in the motor thalamus of movement disorder and pain patients.

PubMed

Basha, Diellor; Dostrovsky, Jonathan O; Lopez Rios, Adriana L; Hodaie, Mojgan; Lozano, Andres M; Hutchison, William D

2014-11-01

Excessive beta oscillations (15-25Hz) in the basal ganglia have been linked to the akineto-rigid symptoms of Parkinson's disease (PD) although it remains unclear whether the underlying mechanism is causative or associative. While a number of studies have reported beta activity in the subthalamic nucleus and globus pallidus internus, relatively little is known about the beta rhythm of the motor thalamus and its relation to movement disorders. To test whether thalamic beta oscillations are related to parkinsonian symptoms, we examined the spectral properties of neuronal activity in the ventral thalamic nuclei of five Parkinson's disease patients (two female, age range 50-72years) and compared them to five essential tremor (three female, aged 41-75) and four central pain patients (one female, aged 38-60). Spike and local field potential recordings were obtained during microelectrode-guided localization of thalamic nuclei prior to the implantation of deep brain stimulating electrodes. A total of 118 movement-related neurons in the region of the ventral intermediate nucleus (Vim) were analyzed across all patient groups. Eighty of these neurons (68%) displayed significant oscillatory firing in the beta range with the limbs at rest. In contrast, only 5.7% of the ventral oral posterior (Vop) (χ(2) test, p<0.05) and only 7.2% of the ventral caudal (Vc) neurons fired rhythmically at beta frequency (χ(2) test, p<0.05). Beta power was significantly decreased during limb movements (ANOVA, p<0.05) and was inversely related to tremor-frequency power during tremor epochs in ET and PD (r(2)=0.44). Comparison between patient groups showed that Vim beta power was significantly higher in ET patients versus pain and PD groups (ANOVA, p<0.05). The findings suggest that beta oscillations are found predominantly in Vim and are involved in movement but are not enhanced in tremor-dominant Parkinson's patients. Copyright © 2014 Elsevier Inc. All rights reserved.

Carbapenem-resistant Pseudomonas aeruginosa strains from a Spanish hospital: characterization of metallo-beta-lactamases, porin OprD and integrons.

PubMed

Rojo-Bezares, Beatriz; Estepa, Vanesa; Cebollada, Rocío; de Toro, María; Somalo, Sergio; Seral, Cristina; Castillo, Francisco Javier; Torres, Carmen; Sáenz, Yolanda

2014-05-01

Molecular typing and mechanisms of carbapenem resistance such as alterations in porin OprD and presence of metallo-beta-lactamases (MBLs), as well as integrons have been studied in a collection of carbapenem-resistant Pseudomonas aeruginosa (CRPA) isolates from a Spanish hospital. One hundred and twenty-three CRPA isolates were recovered from different samples of 80 patients. Clonal relationship among CRPA was analyzed by SpeI-PFGE. Susceptibility testing to 11 antibiotics and MBL phenotype was determined by microdilution, IP/IPI E-test and double disc method. The oprD gene was studied by PCR and sequencing, and mutations were determined comparing with P. aeruginosa PAO1 sequence. Characterization of MBLs, and class 1 and 2 integrons were studied by PCR and sequencing. SDS-PAGE analysis of outer membrane proteins of selected strains was performed. Seventy-four-per-cent of patients with CRPA were hospitalised in the ICU setting and 50% had long hospitalization stays. Sixty-four different PFGE patterns were detected, and 87 CRPA strains were further analyzed. MBL phenotype was detected in 43 of 87 strains (49.4%), which contained blaVIM-2 gene inside class 1 integrons. VIM-2-producing strains belonged to lineages ST175, ST235, and ST973. A great diversity of nucleotide insertions, deletions, and mutations in oprD gene, and the presence of a new insertion sequence (ISPa45) truncating oprD were identified among CRPA strains. Class 1 integrons were detected in 75% of CRPA strains, blaVIM-2 and the new arrangement aac(3)-Ia+ISPa34+aadA1 (named as In661) being the most frequent gene-cassette arrays detected. Other gene cassettes detected in integrons were: aadB, aadA6, aadA7, aac(6')-Ib', and blaOXA-46. Copyright © 2014 Elsevier GmbH. All rights reserved.

The atmospheres of Saturn and Titan in the near-infrared: First results of Cassini/Vims

USGS Publications Warehouse

Baines, K.H.; Momary, T.W.; Buratti, B.J.; Matson, D.L.; Nelson, R.M.; Drossart, P.; Sicardy, B.; Formisano, V.; Bellucci, G.; Coradini, A.; Griffith, C.; Brown, R.H.; Bibring, J.-P.; Langevin, Y.; Capaccioni, F.; Cerroni, P.; Clark, R.N.; Combes, M.; Cruikshank, D.P.; Jaumann, R.; McCordt, T.B.; Mennella, V.; Nicholson, P.D.; Sotin, Christophe

2006-01-01

The wide spectral coverage and extensive spatial, temporal, and phase-angle mapping capabilities of the Visual Infrared Mapping Spectrometer (VIMS) onboard the Cassini-Huygens Orbiter are producing fundamental new insights into the nature of the atmospheres of Saturn and Titan. For both bodies, VIMS maps over time and solar phase angles provide information for a multitude of atmospheric constituents and aerosol layers, providing new insights into atmospheric structure and dynamical and chemical processes. For Saturn, salient early results include evidence for phosphine depletion in relatively dark and less cloudy belts at temperate and mid-latitudes compared to the relatively bright and cloudier Equatorial Region, consistent with traditional theories of belts being regions of relative downwelling. Additional Saturn results include (1) the mapping of enhanced trace gas absorptions at the south pole, and (2) the first high phase-angle, high-spatial-resolution imagery of CH4 fluorescence. An additional fundamental new result is the first nighttime near-infrared mapping of Saturn, clearly showing discrete meteorological features relatively deep in the atmosphere beneath the planet's sunlit haze and cloud layers, thus revealing a new dynamical regime at depth where vertical dynamics is relatively more important than zonal dynamics in determining cloud morphology. Zonal wind measurements at deeper levels than previously available are achieved by tracking these features over multiple days, thereby providing measurements of zonal wind shears within Saturn's troposphere when compared to cloudtop movements measured in reflected sunlight. For Titan, initial results include (1) the first detection and mapping of thermal emission spectra of CO, CO2, and CH3D on Titan's nightside limb, (2) the mapping of CH4 fluorescence over the dayside bright limb, extending to ??? 750 km altitude, (3) wind measurements of ???0.5 ms-1, favoring prograde, from the movement of a persistent (multiple months) south polar cloud near 88??S latitude, and (4) the imaging of two transient mid-southern-latitude cloud features. ?? Springer Science+Business Media, Inc. 2006.