Developing a Successful High School Science Research Program via Teacher Training, Student Internships, and Community Support

NASA Astrophysics Data System (ADS)

Danch, J. M.; Darytichen, F.

2004-12-01

The purpose of the Science Research Program is to allow students to perform authentic scientific research in disciplines of their choosing over a period of 3 years. The success of the program has allowed for expansion including community involvement, student mentorship, and a series of professional development programs. Through state and national competition and community symposia, student research is evaluated, showcased, and subsequently supported both idealistically and financially by local government and industrial partnerships. Student internships and university/industrial mentorship programs allow students to pursue research topics and utilize equipment exceeding the scope of the secondary science classroom. Involved teachers have developed and delivered professional development workshops to foster the successful implementation of scientific research programs at additional high schools throughout the state.

An Analysis of Homeless Veterans Participating in the Homeless Veteran Reintegration Program

ERIC Educational Resources Information Center

Campbell, Katrina Lanelle

2010-01-01

The purpose of this study was to conduct an analysis on ex post facto data of the federal grant supported Homeless Veterans Reintegration Program (HVRP) administered at Goodwill Industries of Lower South Carolina. Pre-existing data on variables such as performance goals, training activities, support services, and demographics from program years…

Transfer of space technology to industry

NASA Technical Reports Server (NTRS)

Hamilton, J. T.

1974-01-01

Some of the most significant applications of the NASA aerospace technology transfer to industry and other government agencies are briefly outlined. The technology utilization program encompasses computer programs for structural problems, life support systems, fuel cell development, and rechargeable cardiac pacemakers as well as reliability and quality research for oil recovery operations and pollution control.

Space commerce - Preparing for the next century

NASA Technical Reports Server (NTRS)

Stone, Barbara A.

1991-01-01

The role of NASA in space commerce is discussed in terms of providing direct assistance to the private sector and in terms of the most suitable industrial areas for such support. The primary mechanism for such support is the program of Centers for the Commercial Development of Space (CCDS) which selects industrial high-technology projects to help make them viable. The research spans such fields as remote sensing, crop forecasting, and microgravity materials processing. The collaboration of NASA and private industry is discussed in terms of sounding-rocket projects, the Commercial Experiment Transporter, and academic/industrial programs designed to generate enthusiasm for commercial space research. The future of such research is expected to focus on CCDSs for microgravity-developed products, commercial infrastructure, SEI, and commercial use of the Space Station Freedom.

The role of industry in Internet education.

PubMed

Wieting, Mark W; Mevis, Howard; Zuckerman, Joseph D

2003-07-01

Each year hundreds of accredited continuing medical education conferences and meetings receive industry support through unrestricted educational grants. Many of these programs might not occur without this funding support. With the explosive growth of continuing medical education on the Internet, industry again is being asked to provide assistance through unrestricted educational grants and in some instances educational content. At the same time, industry is using the Internet to provide orthopaedic surgeons with education and information about their products and services. Education and information do not require continuing medical education accreditation to be valuable. Although some people in continuing medical education voice ethical concerns regarding the nature of industry's involvement in education, meeting the needs of orthopaedic surgeons remains the top priority. As demands on the orthopaedic surgeons' time continue to impact participation in educational meetings, industry will continue to play a critical role in helping educational organizations such as medical specialty societies develop new, innovative educational programs for presentation via the Internet.

Support for Different Roles in Software Engineering Master's Thesis Projects

ERIC Educational Resources Information Center

Host, M.; Feldt, R.; Luders, F.

2010-01-01

Like many engineering programs in Europe, the final part of most Swedish software engineering programs is a longer project in which the students write a Master's thesis. These projects are often conducted in cooperation between a university and industry, and the students often have two supervisors, one at the university and one in industry. In…

AICD -- Advanced Industrial Concepts Division Biological and Chemical Technologies Research Program. 1993 Annual summary report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Petersen, G.; Bair, K.; Ross, J.

1994-03-01

The annual summary report presents the fiscal year (FY) 1993 research activities and accomplishments for the United States Department of Energy (DOE) Biological and Chemical Technologies Research (BCTR) Program of the Advanced Industrial Concepts Division (AICD). This AICD program resides within the Office of Industrial Technologies (OIT) of the Office of Energy Efficiency and Renewable Energy (EE). The annual summary report for 1993 (ASR 93) contains the following: A program description (including BCTR program mission statement, historical background, relevance, goals and objectives), program structure and organization, selected technical and programmatic highlights for 1993, detailed descriptions of individual projects, a listingmore » of program output, including a bibliography of published work, patents, and awards arising from work supported by BCTR.« less

The Advanced Industrial Materials (AIM) program office of industrial technologies fiscal year 1995

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sorrell, C.A.

1997-04-01

In many ways, the Advanced Industrial Materials (AIM) Program underwent a major transformation in FY95 and these changes have continued to the present. When the Program was established in 1990 as the Advanced Industrial Concepts (AIC) Materials Program, the mission was to conduct applied research and development to bring materials and processing technologies from the knowledge derived from basic research to the maturity required for the end use sectors for commercialization. In 1995, the Office of Industrial Technologies (OIT) made radical changes in structure and procedures. All technology development was directed toward the seven `Vision Industries` that use about 80%more » of industrial energy and generated about 90% of industrial wastes. These are: aluminium; chemical; forest products; glass; metal casting; refineries; and steel. OIT is working with these industries, through appropriate organizations, to develop Visions of the desired condition of each industry some 20 to 25 years in the future and then to prepare Road Maps and Implementation Plans to enable them to reach their goals. The mission of AIM has, therefore, changed to `Support development and commercialization of new or improved materials to improve productivity, product quality, and energy efficiency in the major process industries.`« less

Final report to DOE: Matching Grant Program for the Penn State University Nuclear Engineering Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jack S. Brenizer, Jr.

2003-01-17

The DOE/Industry Matching Grant Program is designed to encourage collaborative support for nuclear engineering education as well as research between the nation's nuclear industry and the U.S. Department of Energy (DOE). Despite a serious decline in student enrollments in the 1980s and 1990s, the discipline of nuclear engineering remained important to the advancement of the mission goals of DOE. The program is designed to ensure that academic programs in nuclear engineering are maintained and enhanced in universities throughout the U.S. At Penn State, the Matching Grant Program played a critical role in the survival of the Nuclear Engineering degree programs.more » Funds were used in a variety of ways to support both undergraduate and graduate students directly. Some of these included providing seed funding for new graduate research initiatives, funding the development of new course materials, supporting new teaching facilities, maintenance and purchase of teaching laboratory equipment, and providing undergraduate scholarships, graduate fellowships, and wage payroll positions for students.« less

78 FR 55261 - Draft Guidance for Industry on Generic Drug User Fee Amendments of 2012: Questions and Answers...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-10

... public and reduce costs to industry. GDUFA enables FDA to assess user fees to support critical and... assess user fees to support critical and measurable enhancements to FDA's generic drugs program. GDUFA...). The draft guidance, when finalized, will represent the Agency's current thinking on ``Generic Drug...

An assessment of educational needs in the Alaskan forest products industry.

Treesearch

Jon Thomas; Eric Hansen; Allen M. Brackley

2005-01-01

Major changes in federal forest policy in Alaska have resulted in a dramatic downsizing of the state's forest industry. These changes have driven efforts for economic restructuring and improved support for Alaskan communities. The University of Alaska Sitka Forest Products program at the University of Alaska Southeast is one example of efforts to better support...

An assessment of educational needs in the Alaskan forest products industry

Treesearch

J. Thomas; E. Hansen; A. Brackley

2005-01-01

Major changes in federal forest policy in Alaska have resulted in a dramatic downsizing of the state's forest industry. These changes have driven efforts for economic restructuring and improved support for Alaskan communities. The University of Alaska Sitka Forest Products program at the University of Alaska Southeast is one example of efforts to better support...

Closing the door on pharma? A national survey of family medicine residencies regarding industry interactions.

PubMed

Fugh-Berman, Adriane; Brown, Steven R; Trippett, Rachel; Bell, Alicia M; Clark, Paige; Fleg, Anthony; Siwek, Jay

2011-05-01

To assess the extent and type of interactions U.S. family medicine residencies permit industry to have with medical students and residents. In 2008, the authors e-mailed a four-question survey to residency directors or coordinators at all 460 accredited U.S. family medicine residencies concerning the types of industry support and interaction permitted. The authors conducted quantitative and qualitative analyses of survey responses and written comments. Residencies that did not permit any industry food, gifts, samples, or support of residency activities were designated "pharma-free." The survey response rate was 62.2% (286/460). Among responding family medicine residencies, 52.1% refused drug samples, 48.6% disallowed industry gifts or food, 68.5% forbade industry-sponsored residency activities, and 44.1% denied industry access to students and residents at the family medicine center. Seventy-five residencies (26.2%) were designated as "pharma-free." Medical-school-based and medical-school-administered residencies were no more likely than community-based residencies to be pharma-free. Among the 211 programs that permitted interaction, 68.7% allowed gifts or food, 61.1% accepted drug samples, 71.1% allowed industry representatives access to trainees in the family medicine center, and 37.9% allowed industry-sponsored residency activities. Respondents commented on challenges inherent to limiting industry interactions. Many programs noted recent changes in plans or practices. Most family medicine residencies limit industry interaction with trainees. Because industry interactions can have adverse effects on rational prescribing, residency programs should assess the benefits and harms of these relationships. Copyright © by the Association of American medical Colleges.

Advanced Industrial Materials (AIM) program. Annual progress report. FY 1996

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1997-04-01

The Advanced Industrial Materials (AIM) Program underwent a major transformation in Fiscal Year 1995 and these changes have continued to the present. When the Program was established in 1990 as the Advanced Industrial Concepts (AIC) Materials Program, the mission was to conduct applied research and development to bring materials and processing technologies from the knowledge derived from basic research to the maturity required for the end use sectors for commercialization. In 1995, the Office of Industrial Technologies (OIT) made radical changes in structure and procedures. All technology development was directed toward the seven `Vision Industries` that use about 80% ofmore » industrial energy and generated about 90% of industrial wastes. These are: aluminium; chemical; forest products; glass; metal casting; refineries; and steel. OIT is working with these industries, through appropriate organizations, to develop Visions of the desired condition of each industry some 20 or 25 years in the future and then to prepare Road Maps and Implementation Plans to enable them to reach their goals. The mission of AIM has, therefore, changed to `Support development and commercialization of new or improved materials to improve productivity, product quality, and energy efficiency in the major process industries.` Though AIM remains essentially a National Laboratory Program, it is necessary that each project have industrial partners, including suppliers to, and customers of, the seven industries. Now, well into FY 1996, the transition is nearly complete and the AIM Program remains healthy and productive, thanks to the superb investigators and Laboratory Program Managers. Separate abstracts have been indexed into the energy database for articles from this report.« less

Consortium for Planning, Developing, and Implementing Exploratory Industrial Career Development Models (Phase I of Three Phases). Interim Report.

ERIC Educational Resources Information Center

Oregon State Univ., Corvallis.

The report describes the organizational phase of a project designed to create program models and supporting literature for exploratory industrial career development programs for grades seven to ten. The project was undertaken by Oregon State University in cooperation with the Oregon State Department of Education and involved the formation of a…

Washington State Biofuels Industry Development

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gustafson, Richard

2017-04-09

The funding from this research grant enabled us to design, renovate, and equip laboratories to support University of Washington biofuels research program. The research that is being done with the equipment from this grant will facilitate the establishment of a biofuels industry in the Pacific Northwest and enable the University of Washington to launch a substantial biofuels and bio-based product research program.

Teresa Spinuzzi | NREL

Science.gov Websites

provided administrative support to the Employment Team in Human Resources, the Deployment Programs Office support to various departments, such as Human Resources, Information Services, and Industrial Hygiene at

Proceedings of the symposium on assessing the industrial hygiene monitoring needs for the coal conversion and oil shale industries

DOE Office of Scientific and Technical Information (OSTI.GOV)

White, O. Jr.

1979-03-01

This work was supported by the United States Department of Energy, Division of Biomedical and Environmental Research, Analysis and Assessment Program, through the Safety and Environmental Protection Division at Brookhaven National Laboratory. The symposium program included presentations centering around the themes: Recognition of Occupational Health Monitoring Requirements for the Coal Conversion and Oil Shale Industries and Status of Dosimetry Technology for Occupational Health Monitoring for the Coal Conversion and Oil Shale Industries. Sixteen papers have been entered individually into EDB and ERA; six had been entered previously from other sources. (LTN)

Impact of Practice-Based Instruction on Graduate Programs in the Pharmaceutical Sciences.

ERIC Educational Resources Information Center

Schumacher, Gerald E.

1979-01-01

A practice- and science-based program of graduate education and scholarship for pharmaceutical science is proposed. Recommendations include the elimination of weak graduate programs, increased industrial support, and development of the clinical scientist. (SF)

CAD-supported university course on photonics and fiber optic communications

NASA Astrophysics Data System (ADS)

Chan, David K. C.; Richter, Andre

2002-05-01

The highly competitive global photonics industry has created a significant demand for professional Photonic Design Automation (PDA) tools and personnel trained to use them effectively. In such a dynamic field, CAD-supported courses built around widely used industrial PDA tools provide many advantages, especially when offered through tertiary education institutions (which are ideally suited to producing the future workforce of the Photonics industry). An objective of VPIsystems' University program is to develop tertiary level courses based on VPIsystems' WDM transmission and component modeling software tools. Advantages offered by such courses include: visualizing and aiding the understanding of complex physical problems encountered in the design of fiber-optic communication systems; virtual laboratory exercises that can accurately reproduce the behavior of real systems and components without the prohibitive infrastructure and maintenance costs of real laboratories; flexibility in studying interrelated physical effects individually or in combination to facilitate learning; provide expertise and practical insights in areas, including industry-focused topics, that are not generally covered in traditional tertiary courses; provide exposure to, currently, the most widely used PDA tools in the industry. In this paper, details of VPIsystems' University program and its CAD-supported Photonics courses will be presented.

Design of a professional development and support program for future photonics industry team leaders

NASA Astrophysics Data System (ADS)

Hall-Wallace, Michelle; Regens, Nancy L.; Pompea, Stephen M.

2002-05-01

The University of Arizona's Collaboration to Advance Teaching Technology and Science (CATTS) program sponsored by the National Science Foundation has found a successful way to unite public and charter school students and teachers, university science outreach programs, graduate and undergraduate students, and university faculty for the betterment of science education. A key aspect of this success has been the ability of the project to assist stakeholders in understanding the different cultural perspectives of all of the participants. The success of this program has led us to create a template for a professional development and support program emphasizing the degree of cross-cultural understanding appropriate for today's multinational photonics industry. This template is designed to give future photonics technical, managerial, and manufacturing leaders training in a variety of areas that can enhance their productivity and ability to lead teams. The design would be appropriate for photonics research and development teams, sales and marketing teams, teams with diverse members new college hires, and newly emplaced managers. This education template would also be appropriate for students in photonics industry technician and graduate- level programs. This type of program is not a substitute for other forms of professional managerial training, but rather augments such programs with material that can aid in a more global perspective.

Department of Energy Support of Energy Intensive Manufacturing Related to Refractory Research

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hemrick, James Gordon

For many years, the United States Department of Energy (DOE) richly supported refractory related research to enable greater energy efficiency processes in energy intensive manufacturing industries such as iron and steel, glass, aluminum and other non-ferrous metal production, petrochemical, and pulp and paper. Much of this support came through research projects funded by the former DOE Energy Efficiency and Renewable Energy (EERE) Office of Industrial Technologies (OIT) under programs such as Advanced Industrial Materials (AIM), Industrial Materials of the Future (IMF), and the Industrial Technologies Program (ITP). Under such initiatives, work was funded at government national laboratories such as Oakmore » Ridge National Laboratory (ORNL), at universities such as West Virginia University (WVU) and the Missouri University of Science and Technology (MS&T) which was formerly the University of Missouri Rolla, and at private companies engaged in these manufacturing areas once labeled industries of the future by DOE due to their strategic and economic importance to American industry. Examples of such projects are summarized below with information on the scope, funding level, duration, and impact. This is only a sampling of representative efforts funded by the DOE in which ORNL was involved over the period extending from 1996 to 2011. Other efforts were also funded during this time at various other national laboratories, universities and private companies under the various programs mentioned above. Discussion of the projects below was chosen because I was an active participant in them and it is meant to give a sampling of the magnitude and scope of investments made by DOE in refractory related research over this time period.« less

Membership in CBE's Industry Consortium

Science.gov Websites

Membership Benefits of Membership Membership FAQs Become a Member Board Meeting Logistics CBE's Overview CBE's research program is supported and guided by its Industry Advisory Board (IAB). Twice a year projects, and identify new research topics. Our Industry Advisory Board mirrors the diversity of the

U.S. Department of Energy photovoltaic energy program contract summary, fiscal year 1999

DOE Office of Scientific and Technical Information (OSTI.GOV)

Surek, T.; Hansen, A.

2000-02-17

This report summarizes the in-house and subcontracted research and development (R and D) activities under the National Center for Photovoltaics (NCPV) and US Department of Energy (DOE) National Photovoltaics Program from October 1, 1998, through September 30, 1999 (FY 1999). The mission of the DOE National Photovoltaics Program is to make PV a significant part of the domestic economy as an industry and an energy resource. The two primary goals of the national program are to (1) maintain the US industry's world leadership in research and technology development and (2) help the US industry remain a major, profitable force inmore » the world market. The NCPV is part of the National PV Program and provides leadership and support to the national program toward achieving its mission and goals.« less

Midwest Nuclear Science and Engineering Consortium

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dr. Wynn Volkert; Dr. Arvind Kumar; Dr. Bryan Becker

2010-12-08

The objective of the Midwest Nuclear Science and Engineering Consortium (MNSEC) is to enhance the scope, quality and integration of educational and research capabilities of nuclear sciences and engineering (NS/E) programs at partner schools in support of the U.S. nuclear industry (including DOE laboratories). With INIE support, MNSEC had a productive seven years and made impressive progress in achieving these goals. Since the past three years have been no-cost-extension periods, limited -- but notable -- progress has been made in FY10. Existing programs continue to be strengthened and broadened at Consortium partner institutions. The enthusiasm generated by the academic, state,more » federal, and industrial communities for the MNSEC activities is reflected in the significant leveraging that has occurred for our programs.« less

Fostering Minerals Workforce Skills of Tomorrow through Education and Training Partnerships

NASA Astrophysics Data System (ADS)

Lind, Gavin

The Minerals Council of Australia (MCA), through its Minerals Tertiary Education Council (MTEC), builds capacity in higher education in the core disciplines of mining engineering, metallurgy and minerals geoscience. Over the past fourteen years, this all-of-industry approach in securing the long-term supply of these critical skills (which remain a chronic skills shortage for the Australian minerals industry) through nationally collaborative programs across sixteen Australian universities delivers spectacular and sustainable results for the industry. These unique, world-first programs are built on a healthy platform of dedicated industry funding and in-kind support and forms part of the MCA's broader uninterrupted, sustainable education and training pathway to increase workforce participation, workforce diversity and workforce skills, regardless of the business cycle in the industry. This paper will highlight the origins, iterations and current successful programs of MTEC, including its future vision, and presents a mechanism for industry and academia to collaborate to address future professional skills needs in the minerals industry globally.

Cooperative Science: A National Study of University and Industry Researchers. Assessment of the Industry/University Cooperative Research Projects Program (IUCR). Volume I.

ERIC Educational Resources Information Center

Johnson, Elmima C.; Tornatzky, Louis G.

This report presents data from a national study of 118 Industry/University Cooperative Research (IUCR) projects supported by the National Science Foundation. Questionnaire responses were gathered from 226 industry and university scientists working on these projects. The purpose of the study was to describe how IUCR projects develop, how they are…

Energy efficient industrialized housing research program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Berg, R.; Brown, G.Z.; Finrow, J.

1989-01-01

This is the second volume of a two volume report on energy efficient industrialized housing. Volume II contains support documentation for Volume I. The following items are included: individual trip reports; software bibliography; industry contacts in the US, Denmark, and Japan; Cost comparison of industrialized housing in the US and Denmark; draft of the final report on the systems analysis for Fleetwood Mobile Home Manufacturers. (SM)

Alabama's Education Coalition Focuses on Supporting the State's Math, Science and Technology Initiative and on Building Distance Learning Programs

NASA Astrophysics Data System (ADS)

Denson, R. L.

2003-12-01

The Alabama Math Science Technology Educational Coalition (AMSTEC) was formed as a non-profit after a 1998 NASA Linking Leaders program brought in education and corporate leaders to address systemic education reform in Alabama public schools. AMSTEC was instrumental in the creation of the Alabama Math Science Technology Initiative (AMSTI), a K-12 program designed using data from national and international research and local teacher survey. In the face of dwindling government support in a state ranked last in education funding, AMSTEC believes that its best hope for improved STEM education lies in strengthening its community/industry partnerships and building upon the Department of Education's newly created AMSTI program. NASA's GLOBE program is the primary earth science education component being integrated into AMSTI. AMSTI is structured to provide teachers with (1) the materials, equipment, technology and supplies necessary to deliver high quality, inquiry-based instruction; (2) professional development linked directly to the educational resources with the intent of strengthening content knowledge, instructional strategies, and use of assessment tools; and (3) on-site support and mentoring throughout the year in the interest of achieving these goals. Roles for community partners to support these objectives far exceed that of mere funding - especially in the area of mentoring and professional development. Currently, AMSTEC consists of 100+ members including classroom teachers and district officers, education department representatives from higher educational institutions, policy makers and administrators, and government and industry representatives. AMSTEC remains partially tied to NASA fiscally and is administratively housed by the National Space Science and Technology Center's Earth System Science Center. AMSTEC's partnership emphasis is focused on increasing corporate and industry participation to support the implementation of AMSTI and its hub-site-based program. Future foci for AMSTEC are development and implementation of distance learning programs across Alabama's K-12 public schools.

Unions, Contractors and CTE

ERIC Educational Resources Information Center

Jarosz, Francesca

2006-01-01

Across Illinois, in places where unions thrive, construction industry professionals and career and technical education (CTE) teachers are working together in promoting work-based learning program to students. Likewise, the outreach program provides union-supported contractors with qualified candidates for future employment. Programs such as the…

NASA support for commerce in space - Broadening opportunities

NASA Technical Reports Server (NTRS)

Stone, Barbara A.; Livingston, Candace D.

1989-01-01

The status of the NASA Office of Commercial Program's initiatives to implement the 1988 commercial space policy and expand industrial interest in the commercial development of space in the post-Challenger era is presented. Specific objectives have been developed to capture the drive and creativity of the private sector, for increasing NASA's effectiveness in conducting business with industrial firms, and impacting the commercial space market. An aggressive, comprehensive, and forward-looking program has been defined which provides the type of infrastructure and organization required to bring industry into the mainstream of space activities.

Materials and process engineering projects for the Sandia National Laboratories/Newly Independent States Industrial Partnering Program. Volume 2

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zanner, F.J.; Moffatt, W.C.

1995-07-01

In July, 1994, a team of materials specialists from Sandia and US. Industry traveled to Russia and the Ukraine to select and fund projects in materials and process technology in support of the Newly Independent States/Industrial Partnering Program (NIS/IPP). All of the projects are collaborations with scientists and Engineers at NIS Institutes. Each project is scheduled to last one year, and the deliverables are formatted to supply US. Industry with information which will enable rational decisions to be made regarding the commercial value of these technologies. This work is an unedited interim compilation of the deliverables received to date.

The feasibility of effluent trading in the energy industries

DOE Office of Scientific and Technical Information (OSTI.GOV)

Veil, J.A.

1997-05-01

In January 1996, the U.S. Environmental Protection Agency (EPA) released a policy statement endorsing effluent trading in watersheds, hoping to spur additional interest in the subject. The policy describes five types of effluent trades - point source/point source, point source/nonpoint source, pretreatment, intraplant, and nonpoint source/nonpoint source. This report evaluates the feasibility of effluent trading for facilities in the oil and gas industry (exploration and production, refining, and distribution and marketing segments), electric power industry, and the coal industry (mines and preparation plants). Nonpoint source/nonpoint source trades are not considered since the energy industry facilities evaluated here are all pointmore » sources. EPA has administered emission trading programs in its air quality program for many years. Programs for offsets, bubbles, banking, and netting are supported by federal regulations, and the 1990 Clean Air Act (CAA) amendments provide a statutory basis for trading programs to control ozone and acid rain. Different programs have had varying degrees of success, but few have come close to meeting their expectations. Few trading programs have been established under the Clean Water Act (CWA). One intraplant trading program was established by EPA in its effluent limitation guidelines (ELGs) for the iron and steel industry. The other existing effluent trading programs were established by state or local governments and have had minimal success.« less

The National Space Science and Technology Center's Education and Public Outreach Program

NASA Astrophysics Data System (ADS)

Cox, G. N.; Denson, R. L.

2004-12-01

The objective of the National Space Science and Technology Center's (NSSTC) Education and Public Outreach program (EPO) is to support K-20 education by coalescing academic, government, and business constituents awareness, implementing best business/education practices, and providing stewardship over funds and programs that promote a symbiotic relationship among these entities, specifically in the area of K-20 Science, Technology, Engineering, and Mathematics (STEM) education. NSSTC EPO Program's long-term objective is to showcase its effective community-based integrated stakeholder model in support of STEM education and to expand its influence across the Southeast region for scaling ultimately across the United States. The Education and Public Outreach program (EPO) is coordinated by a supporting arm of the NSSTC Administrative Council called the EPO Council (EPOC). The EPOC is funded through federal, state, and private grants, donations, and in-kind contributions. It is comprised of representatives of NSSTC Research Centers, both educators and scientists from the Alabama Space Science and Technology Alliance (SSTA) member institutions, the Alabama Space Grant Consortium and the NASA Marshall Space Flight Center's (MSFC) Education Office. Through its affiliation with MSFC and the SSTA - a consortium of Alabama's research universities that comprise the NSSTC, EPO fosters the education and development of the next generation of Alabama scientists and engineers by coordinating activities at the K-20 level in cooperation with the Alabama Department of Education, the Alabama Commission on Higher Education, and Alabama's businesses and industries. The EPO program's primary objective is to be Alabama's premiere organization in uniting academia, government, and private industry by way of providing its support to the State and Federal Departments of Education involved in systemic STEM education reform, workforce development, and innovative uses of technology. The NSSTC EPO is poised to be a leader in this field because of its direct support to agency's accountable for America's educational systems, and for its synergistic relationships across the integrated stakeholder community. This includes Alabama's NASA facility, USRA, the SSTA's seven research universities, businesses and industries, and the Alabama Math, Science and Technology Education Coalition. In addition to traditional outreach methodologies, the EPO uses the unique resources of the NSSTC to assist in dissolving the boundaries in education among academia, government, and industry and to foster a more collaborative environment in support of STEM education reform.

Q2/Q3 2016 Solar Industry Update

DOE Office of Scientific and Technical Information (OSTI.GOV)

Feldman, David; Boff, Daniel; Margolis, Robert

This technical presentation provides an update on the major trends that occurred in the solar industry in the Q2 and Q3 of 2016. Major topics of focus include global and U.S. supply and demand, module and system price, investment trends and business models, and updates on U.S. government programs supporting the solar industry.

Q3/Q4 2016 Solar Industry Update

DOE Office of Scientific and Technical Information (OSTI.GOV)

Feldman, David; Boff, Daniel; Margolis, Robert

This technical presentation provides an update on the major trends that occurred in the solar industry in the Q3 and Q4 of 2016. Major topics of focus include global and U.S. supply and demand, module and system price, investment trends and business models, and updates on U.S. government programs supporting the solar industry.

Q2/Q3 2017 Solar Industry Update

DOE Office of Scientific and Technical Information (OSTI.GOV)

Feldman, David J.; Hoskins, Jack; Margolis, Robert M.

This technical presentation provides an update on the major trends that occurred in the solar industry in Q2 and Q3 of 2017. Major topics of focus include global and U.S. supply and demand, module and system price, investment trends and business models, and updates on U.S. government programs supporting the solar industry.

Q4 2017/Q1 2018 Solar Industry Update

DOE Office of Scientific and Technical Information (OSTI.GOV)

Feldman, David J; Margolis, Robert M; Hoskins, Jack

This technical presentation provides an update on the major trends that occurred in the solar industry in Q4 2017 and Q1 2018. Major topics of focus include global and U.S. supply and demand, module and system price, investment trends and business models, and updates on U.S. government programs supporting the solar industry.

Q3/Q4 2017 Solar Industry Update

DOE Office of Scientific and Technical Information (OSTI.GOV)

Feldman, David J.; Hoskins, Jack; Margolis, Robert M.

This technical presentation provides an update on the major trends that occurred in the solar industry in the Q3 and Q4 of 2017. Major topics of focus include global and U.S. supply and demand, module and system price, investment trends and business models, and updates on U.S. government programs supporting the solar industry.

How Emerging Technologies are Changing the Rules of Spacecraft Ground Support

NASA Technical Reports Server (NTRS)

Boland, Dillard; Steger, Warren; Weidow, David; Yakstis, Lou

1996-01-01

As part of its effort to develop the flight dynamics distributed system (FDDS), NASA established a program for the continual monitoring of the developments in computer and software technologies, and for assessing the significance of constructing and operating spacecraft ground data systems. In relation to this, technology trends in the computing industry are reviewed, exploring their significance for the spacecraft ground support industry. The technologies considered are: hardware; object computing; Internet; automation, and software development. The ways in which these technologies have affected the industry are considered.

The Business Value of Superior Energy Performance

DOE Office of Scientific and Technical Information (OSTI.GOV)

McKane, Aimee; Scheihing, Paul; Evans, Tracy

Industrial facilities participating in the U.S. Department of Energy’s (US DOE) Superior Energy Performance (SEP) program are finding that it provides them with significant business value. This value starts with the implementation of ISO 50001-Energy management system standard, which provides an internationally-relevant framework for integration of energy management into an organization’s business processes. The resulting structure emphasizes effective use of available data and supports continual improvement of energy performance. International relevance is particularly important for companies with a global presence or trading interests, providing them with access to supporting ISO standards and a growing body of certified companies representing themore » collective knowledge of communities of practice. This paper examines the business value of SEP, a voluntary program that builds on ISO 50001, inviting industry to demonstrate an even greater commitment through third-party verification of energy performance improvement to a specified level of achievement. Information from 28 facilities that have already achieved SEP certification will illustrate key findings concerning both the value and the challenges from SEP/ISO 50001 implementation. These include the facilities’ experience with implementation, internal and external value of third-party verification of energy performance improvement; attractive payback periods and the importance of SEP tools and guidance. US DOE is working to bring the program to scale, including the Enterprise-Wide Accelerator (SEP for multiple facilities in a company), the Ratepayer-Funded Program Accelerator (supporting tools for utilities and program administrators to include SEP in their program offerings), and expansion of the program to other sectors and industry supply chains.« less

Delivering a National Process Design Unit with Industry Support

NASA Astrophysics Data System (ADS)

Ibana, Don

Supported by the Minerals Council of Australia (MCA) through the Minerals Tertiary Education Council (MTEC), three Australian universities-Curtin University, Murdoch University and the University of Queensland-have formed the Metallurgical Education Partnership (MEP) to jointly develop and deliver an engineering design capstone unit-Metallurgical Process and Plant Design-in their respective undergraduate programs in extractive metallurgy, in order to enhance the students' educational experience. A unique feature of the program is the close interaction of the students in all three universities and a significant involvement of industry professionals. Now in its sixth year, it is clear that this unit is achieving its objectives.

NREL Photovoltaic Program FY 1996 Annual Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

This report summarizes the in-house and subcontract research and development (R&D) activities under the National Renewable Energy Laboratory (NREL) Photovoltaics (PV) Program from October 1, 1995 through September 30, 1996 (fiscal year [FY] 1996). The NREL PV Program is part of the U.S. Department of Energy's (DOE) National Photovoltaics Program, as described in the DOE Photovoltaics Program Plan, FY 1991 - FY 1995. The mission of the DOE National Photovoltaics Program is to: "Work in partnership with U.S. industry to develop and deploy photovoltaic technology for generating economically competitive electric power, making photovoltaics an important contributor to the nation's andmore » the world's energy use and environmental improvement. The two primary goals of the national program are to (1) maintain the U.S. PV industry's world leadership in research and technology development and (2) help the U.S. industry remain a major, profitable force in the world market. The NREL PV Program provides leadership and support to the national program toward achieving its mission and goals.« less

NCPV FY 1998 Annual Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

McConnell, R. D.; Hansen, A.

1999-07-19

This report summarizes the in-house and subcontracted research and development (R and D) activities under the National Center for Photovoltaics (NCPV) from October 1, 1997 through September 30, 1998 (FY 1998). The NCPV is part of the U.S. Department of Energy's (DOE's) National Photovoltaics Program, as described in the DOE National Photovoltaics Program Plan for 1996-2000. The mission of the DOE National Photovoltaics Program is to make PV a significant part of the domestic economy--as an industry and as an energy resource. The two primary goals of the national program are to (1) maintain the U.S. industry's world leadership inmore » research and technology development and (2) help the U.S. industry remain a major, profitable force in the world market. The NCPV provides leadership and support to the national program toward achieving its mission and goals.« less

NASA's commercial research plans and opportunities

NASA Technical Reports Server (NTRS)

Arnold, Ray J.

1992-01-01

One of the primary goals of the National Aeronautics and Space Administration's (NASA) commercial space development plan is to encourage the development of space-based products and markets, along with the infrastructure and transportation that will support those products and markets. A three phased program has been instituted to carry out this program. The first phase utilizes government grants through the Centers for the Commercial Development of Space (CCDS) for space-related, industry driven research; the development of a technology data base; and the development of commercial space transportation and infrastructure. The second phase includes the development of these technologies by industry for new commercial markets, and features unique industry/government collaborations such as Joint Endeavor Agreements. The final phase will feature technical applications actually brought to the marketplace. The government's role will be to support industry required infrastructure to encourage start-up markets and industries through follow-on development agreements such as the Space Systems Development Agreement. The Office of Commercial Programs has an aggressive flight program underway on the Space Shuttle, suborbital rockets, orbital expendable launch vehicles, and the Commercial Middeck Accommodation Module with SPACEHAB Inc. The Office of Commercial Program's has been allocated 35 percent of the U.S. share of the Space Station Freedom resources for 1997 utilization. A utilization plan has been developed with the Centers for the Commercial Development of Space and has identified eleven materials processing and biotechnology payloads occupying 5 double racks in the pressurized module as well as two payloads external to the module in materials exposure and environment monitoring. The Office of Commercial Programs will rely on the Space Station Freedom to provide the long duration laboratory component for space-based commercial research.

NASA's commercial research plans and opportunities

NASA Astrophysics Data System (ADS)

Arnold, Ray J.

One of the primary goals of the National Aeronautics and Space Administration's (NASA) commercial space development plan is to encourage the development of space-based products and markets, along with the infrastructure and transportation that will support those products and markets. A three phased program has been instituted to carry out this program. The first phase utilizes government grants through the Centers for the Commercial Development of Space (CCDS) for space-related, industry driven research; the development of a technology data base; and the development of commercial space transportation and infrastructure. The second phase includes the development of these technologies by industry for new commercial markets, and features unique industry/government collaborations such as Joint Endeavor Agreements. The final phase will feature technical applications actually brought to the marketplace. The government's role will be to support industry required infrastructure to encourage start-up markets and industries through follow-on development agreements such as the Space Systems Development Agreement. The Office of Commercial Programs has an aggressive flight program underway on the Space Shuttle, suborbital rockets, orbital expendable launch vehicles, and the Commercial Middeck Accommodation Module with SPACEHAB Inc. The Office of Commercial Program's has been allocated 35 percent of the U.S. share of the Space Station Freedom resources for 1997 utilization. A utilization plan has been developed with the Centers for the Commercial Development of Space and has identified eleven materials processing and biotechnology payloads occupying 5 double racks in the pressurized module as well as two payloads external to the module in materials exposure and environment monitoring. The Office of Commercial Programs will rely on the Space Station Freedom to provide the long duration laboratory component for space-based commercial research.

Synergistic control center development utilizing commercial technology and industry standards. [NASA space programs

NASA Technical Reports Server (NTRS)

Anderson, Brian L.

1993-01-01

The development of the Control Center Complex (CCC), a synergistic control center supporting both the Space Station Freedom and the Space Shuttle Program, is described. To provide maximum growth and flexibility, the CCC uses commercial off-the-shelf technology and industry standards. The discussion covers the development philosophy, CCC architecture, data distribution, the software platform concept, workstation platform, commercial tools for the CCC, and benefits of synergy.

Academia-industry collaboration in continuing medical education: description of two approaches.

PubMed

Katz, Harvey P; Goldfinger, Stephen E; Fletcher, Suzanne W

2002-01-01

Although concerns have been raised about industry support of continuing medical education (CME), there are few published reports of academia-industry collaboration in the field. We describe and evaluate Pri-Med, a CME experience for primary care clinicians developed jointly by the Harvard Medical School (HMS) and M/C Communications. Since 1995, 19 Pri-Med conferences have been held in four cities, drawing more than 100,000 primary care clinicians. The educational core of each Pri-Med conference is a 3-day Harvard course, "Current Clinical Issues in Primary Care." Course content is determined by a faculty committee independent of any commercial influence. Revenues from multiple industry sources flow through M/C Communications to the medical school as an educational grant to support primary care education. Pri-Med also offers separate pharmaceutical company-funded symposia. Comparing the two educational approaches during four conferences, 221 HMS talks and 103 symposia were presented. The HMS course covered a wide range with 133 topics; the symposia focused on 30 topics, most of which were linked to recently approved new therapeutic products manufactured by the funders. Both the course and the symposia were highly rated by attendees. When CME presentations for primary care physicians receive direct support from industry, the range of offered topics is narrower than when programs are developed independently of such support. There appear to be no differences in the perceived quality of presentations delivered with and without such support. Our experience suggests that a firewall between program planners and providers of financial support will result in a broader array of educational subjects relevant to the field of primary care.

Q4 2016/Q1 2017 Solar Industry Update

DOE Office of Scientific and Technical Information (OSTI.GOV)

Margolis, Robert; Feldman, David; Boff, Daniel

2017-05-17

This technical presentation provides an update on the major trends that occurred in the solar industry in the fourth quarter of 2016 and the first quarter of 2017. Major topics of focus include global and U.S. supply and demand, module and system price, investment trends and business models, and updates on U.S. government programs supporting the solar industry.

Advanced Communications Technology Satellite (ACTS). Phase 1: Industrial/academic experimenters

NASA Technical Reports Server (NTRS)

Maisel, James E.; Nowlin, Robert W.

1992-01-01

This report presents the work done at Arizona State University under the ACTS Experimenters Program. The main thrust of the Program was to develop experiments to test, evaluate, and prove the commercial worthiness of the ACTS satellite which is scheduled for launch in 1993. To accomplish this goal, meetings were held with various governmental, industrial, and academic units to discuss the ACTS satellite and its technology and possible experiments that would generate industrial interest and support for ASU's efforts. Several local industries generated several experiments of their own. The investigators submitted several experiments of educational, medical, commercial, and technical value and interest. The disposition of these experimental proposals is discussed in this report.

LIFEbeat, the music industry fights AIDS.

PubMed

Applestone, J

1998-02-01

LIFEbeat is a not-for-profit AIDS resource and awareness organization supported primarily by people in the music industry. It was founded in 1982 and provides grants to many community-based organizations and to members of the music industry who are living with HIV/AIDS. Among its programs is Hearts and Voices, a program that eases the suffering and isolation of patients by providing live musical entertainment at hospitals and health care facilities. The group also sets up information booths at concerts and sponsors events such as SkateAID and BoardAID, fundraisers designed to appeal to in-line skaters and snowboarders.

Industrial machinery noise impact modeling, volume 1

NASA Astrophysics Data System (ADS)

Hansen, C. H.; Kugler, B. A.

1981-07-01

The development of a machinery noise computer model which may be used to assess the effect of occupational noise on the health and welfare of industrial workers is discussed. The purpose of the model is to provide EPA with the methodology to evaluate the personnel noise problem, to identify the equipment types responsible for the exposure and to assess the potential benefits of a given noise control action. Due to its flexibility in design and application, the model and supportive computer program can be used by other federal agencies, state governments, labor and industry as an aid in the development of noise abatement programs.

Support to Industry Partners in Achieving Designation/Certification for the US Safety Act (Soutien aux Partenaires de L’industrie afin de les Aider a Obtenir la Designation/Certification Associee a la Loi Americaine sur la Securite)

DTIC Science & Technology

2011-10-01

partners of the CRTI and PSTP programs in applying and receiving positive status under the SAFTEY Act is a valuable service that DRDC-CSS can supply...Canadian industry partners of the CRTI/PSTP program into successfully applying for designation under the USA SAFETY Act, and preferably to be added...to the Department of Homeland Security Approved Product List (APL). This will enable Canadian companies to access these markets with the outputs of

Hearing conservation practices in eight noisy industries

NASA Astrophysics Data System (ADS)

Daniell, William E.; Swan, Susan S.; Camp, Janice; Cohen, Martin; McDaniel, Mary M.; Stebbins, John; Leo, Robert

2005-04-01

This study evaluated noise exposures and hearing conservation practices at 76 companies in eight industries with high rates of workers' compensation claims for hearing loss. Nearly all companies had exposures that required a hearing conservation program, and more than half had exposures that required consideration of noise controls. The use of noise measurements and consideration of controls was low in all industries. The completeness of hearing conservation programs was strongly associated with the extent of exposure in an industry, although practices varied widely within industries. Most companies had substantial deficiencies. More than one-third did not conduct annual training, and training had shortcomings at many others. One-third had not conducted audiometry. Hearing protection was commonly underused. Reported use was highest at companies with relatively complete programs, and in industries where exposure was most prevalent and least intermittent. Many employees had difficulty estimating how often, and presumably when, their exposure was excessive. There is a need for new strategies to promote and maintain hearing conservation efforts in noisy industries. The industries with greatest margin for improvement are not the noisiest industries but those where exposure is moderate or intermittent. [Work supported by the National Institute for Occupational Safety and Health.

Report on Employer-Based Training, 1983-84.

ERIC Educational Resources Information Center

Cronin, Doug; Parkison, Teresa

California's Employer-Based Training (EBT) Program focuses on preparing individuals for the new technologies of the future and responding to the real and current skills training needs of business and industry. The three major program components are: new programs in high and emerging technologies; private sector support for worksite-based training;…

The Impact of Service-Learning in Supporting Family Empowerment and Welfare Program

ERIC Educational Resources Information Center

Natadjaja, Listia; Cahyono, Yohanes Budi

2009-01-01

Background: Facilitated by Community Outreach Centre, the Packaging Design class of Visual Communication Design major at Petra Christian University implements Service-Learning Program to assist micro-industries that have joined in the Family Empowerment and Welfare Program in Kabupaten Kediri. Students, in cooperation with lecturer assist…

West Valley College Vocational and Technical Advisory Committees.

ERIC Educational Resources Information Center

West Valley Coll., Saratoga, CA.

This brochure describes junior college advisory committees as groups of persons who represent industry and assist in organizing curriculum, advise on material procurement, keep the college current on industry practices, coordinate programs with the community, assist in student selection, guide instructors, provide moral support and public…

Trade and Industrial Education: Visions of the Future.

ERIC Educational Resources Information Center

Farmer, Edgar I.

The future effectiveness of trade and industrial (T&I) education programs can be increased by reforms in teacher education, collaboration with national support agencies, and taking advantage of technological and instructional advances. Among the important teacher education reforms are the following: (1) teacher preparation should include liberal…

Industry and Education: A Winning Combination.

ERIC Educational Resources Information Center

Payne, John H.; Williams-Foster, Cathy

1997-01-01

Describes how the petrochemical employers of Texas City, Texas developed a fully accredited two-year associate degree program at the local community college tailored to train process operators for entry into the refining and chemical industry. Discusses planning; scholarship funds; vendor and community support; student population; outcomes of the…

Import Auto Technician; Curriculum Guide for the Development of an Import Automobile Technology Program.

ERIC Educational Resources Information Center

East Los Angeles Coll., CA.

In this curriculum guide, courses in a three-phase community college program for training import automobile technicians are provided. Following an introducation to the guide, the background of the development of the program, the program, the instruction, support for instruction, and the import automobile industry are discussed. Sample options for…

Pipeline Optimization Program (PLOP)

DTIC Science & Technology

2006-08-01

the framework of the Dredging Operations Decision Support System (DODSS, https://dodss.wes.army.mil/wiki/0). PLOP compiles industry standards and...efficiency point ( BEP ). In the interest of acceptable wear rate on the pump, industrial standards dictate that the flow Figure 2. Pump class as a function of...percentage of the flow rate corresponding to the BEP . Pump Acceptability Rules. The facts for pump performance, industrial standards and pipeline and

Support services for the automative gas turbine project

NASA Technical Reports Server (NTRS)

Golec, T. (Editor)

1981-01-01

Support was provided to DOE and NASA in their efforts to inform industry, the public, and Government on the benefits and purpose of the gas turbine programs through demonstrations and exhibits. Tasks were carried out for maintenance, repair, and retrofit of the experimental gas turbine engines being used by NASA in their gas turbine technology programs and in program demonstrations. Limited support testing was conducted at Chrysler in which data were generated on air bearing rotor shaft dynamics, heavy duty variable sheave rubber belts, high temperature elastomer regenerator drive mounting and graphite regenerator seal friction characteristics.

The international space station: An opportunity for industry-sponsored global education

NASA Astrophysics Data System (ADS)

Shields, Cathleen E.

1999-01-01

The International Space Station provides an excellent opportunity for industry sponsorship of international space education. As a highly visible worldwide asset, the space station already commands our interest. It has captured the imagination of the world's researchers and connected the world's governments. Once operational, it can also be used to capture the dreams of the world's children and connect the world's industry through education. The space station's global heritage and ownership; its complex engineering, construction, and operation; its flexible research and technology demonstration capability; and its long duration make it the perfect educational platform. These things also make a space station education program attractive to industry. Such a program will give private industry the opportunity to sponsor space-related activities even though a particular industry may not have a research or technology-driven need for space utilization. Sponsors will benefit through public relations and goodwill, educational promotions and advertising, and the sale and marketing of related products. There is money to be made by supporting, fostering, and enabling education in space through the International Space Station. This paper will explore various ISS education program and sponsorship options and benefits, will examine early industry response to such an opportunity, and will make the case for moving forward with an ISS education program as a private sector initiative.

Effects of expiration of the Federal energy tax credit on the National Photovoltaics Program

NASA Technical Reports Server (NTRS)

Smith, J. L.

1984-01-01

Projected 1986 sales are significantly reduced as a direct result of system price increases following from expiration of the Federal energy tax credits. There would be greatly reduced emphasis on domestic electric utility applications. Indirect effects arising from unrealized economies of scale and reduced private investment in PV research and development (R&D) and in production facilities could have a very large cumulative adverse impact on the U.S. PV industry. The industry forecasts as much as fourfold reduction in 1990 sales if tax credits expire, compared with what sales would be with the credits. Because the National Photovoltaics Program is explicitly structured as a government partnership, large changes in the motivation or funding of either partner can affect Program success profoundly. Reduced industry participation implies that such industry tasks as industrialization and new product development would slow or halt. Those research areas receiving heavy R&D support from private PV manufacturers would be adversely affected.

Integrating molecular tools and conventional approaches in the Oregon State University hazelnut breeding program

Treesearch

Shawn A. Mehlenbacher

2012-01-01

The Oregon State University (OSU) hazelnut breeding program, initiated in 1969, continues to develop new cultivars for the hazelnut industry that combine suitability to the blanched kernel market with resistance to eastern filbert blight (EFB) caused by Anisogramma anomala. Oregon's hazelnut growers support the program through the Oregon...

Attracting students to nuclear careers: INPO educational assistance program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dunkle, M.

1981-10-01

The utility industry is responding to a manpower shortage of 2000 at nuclear plants with a concerted analysis of regional training centers and educational assistance programs through the Institute of Nuclear Power Operations (INPO). University support and cooperation are generally strong. The INPO program includes undergraduate- and graduate-level scholarships and fellowships. (DCK)

15 CFR 700.55 - Assistance programs with Canada and other nations.

Code of Federal Regulations, 2010 CFR

2010-01-01

... the United Kingdom in support of approved programs. (b) Canada. (1) The joint U.S.-Canadian military arrangements for the defense of North America and the integrated nature of their defense industries as set... Assistance programs with Canada and other nations. (a) To promote military assistance to foreign nations...

15 CFR 700.55 - Assistance programs with Canada and other nations.

Code of Federal Regulations, 2013 CFR

2013-01-01

... the United Kingdom in support of approved programs. (b) Canada. (1) The joint U.S.-Canadian military arrangements for the defense of North America and the integrated nature of their defense industries as set... Assistance programs with Canada and other nations. (a) To promote military assistance to foreign nations...

15 CFR 700.55 - Assistance programs with Canada and other nations.

Code of Federal Regulations, 2012 CFR

2012-01-01

... the United Kingdom in support of approved programs. (b) Canada. (1) The joint U.S.-Canadian military arrangements for the defense of North America and the integrated nature of their defense industries as set... Assistance programs with Canada and other nations. (a) To promote military assistance to foreign nations...

15 CFR 700.55 - Assistance programs with Canada and other nations.

Code of Federal Regulations, 2011 CFR

2011-01-01

... the United Kingdom in support of approved programs. (b) Canada. (1) The joint U.S.-Canadian military arrangements for the defense of North America and the integrated nature of their defense industries as set... Assistance programs with Canada and other nations. (a) To promote military assistance to foreign nations...

15 CFR 700.55 - Assistance programs with Canada and other nations.

Code of Federal Regulations, 2014 CFR

2014-01-01

... the United Kingdom in support of approved programs. (b) Canada. (1) The joint U.S.-Canadian military arrangements for the defense of North America and the integrated nature of their defense industries as set... Assistance programs with Canada and other nations. (a) To promote military assistance to foreign nations...

Martin Marietta, Y-12 Plant Laboratory Partnership Program Plan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Koger, J.

1995-02-10

The Y-12 Plant currently embraces three mission areas; stockpile surveillance, maintaining production capability, and storage of special nuclear materials. The Y-12 Plant also contributes to the nations` economic strength by partnering with industry in deploying technology. This partnering has been supported to a great extent through the Technology Transfer Initiative (TTI) directed by DOE/Defense Programs (DP-14). The Oak Ridge Centers for Manufacturing Technology (ORCMT) was established to draw upon the manufacturing and fabrication capabilities at the Y-12 Plant to coordinate and support collaborative efforts, between DP and the domestic industrial sector, toward the development of technologies which offer mutual benefitmore » to both DOE/DP programs and the private sector. Most of the needed technologies for the ``Factory of the Future`` (FOF) are being pursued as core areas at the Y-12 Plant. As a result, 85% of DP-14 projects already support the FOF. The unique capabilities of ORCMT can be applied to a wide range of manufacturing problems to enhance the capabilities of the US industrial base and its economic outcome. The ORCMT has an important role to play in DOE`s Technology Transfer initiative because its capabilities are focused on applied manufacturing and technology deployment which has a more near-term impact on private sector competitiveness. The Y-12 Plant uses the ORCMT to help maintain its own core competencies for the FOF by challenging its engineers and capabilities with technical problems from industry. Areas of strength at the Y-12 Plant that could impact the FOF include modeling of processes and advanced materials; intelligent inspection systems with standardized operator interfaces, analysis software, and part programming language; electronic transfer of designs and features; existing computer-based concurrent engineering; and knowledge-based forming process.« less

Visiting Professorships

NASA Astrophysics Data System (ADS)

Applications are now being accepted for the National Science Foundation (NSF) Visiting Professorships for Women Program. Under this program, women scientists and engineers from industry, government, and academia can be visiting professors at academic institutions in the United States.The program's objectives are to provide opportunities for women to advance their careers in the disciplines of science and engineering that are supported by NSF to provide greater visibility and wider opportunities for women scientists and engineers employed in industry, government, and academic institutions, and to provide encouragement for other women to pursue careers in science and engineering through the awardees' research, lecturing, counseling, and mentoring activities.

Participating in commercial space ventures: Introduction to NASA Centers for the Commercial Development of Space and the Cooperative Agreements Programs

NASA Technical Reports Server (NTRS)

1990-01-01

In response to a Presidential directive, NASA has implemented a space policy which actively supports and encourages U.S. industry investment and participation in commercial space ventures. NASA's Office of Commercial Programs (OCP) has played a significant role in stimulating the growth of commercial space activity. Through a variety of programs, OCP encourages commercial interest and involvement in space endeavors by providing access to NASA resources and opportunities for the emerging space industry to reduce the technical, financial, and business risks associated with space-related activities. This manual describes NASA's Commercial Uses of Space Program and introduces participants to four major OCP Commercial programs: Technology Utilization (TU), Small Business Innovation Research (SBIR), Centers for the Commercial Development of Space Flight Agreement (CCDSFA), and Cooperative Agreements Programs. The objective of this manual is to assist U.S. industry identify and pursue the appropriate agreement for participation in a commercial space venture.

IPAD: A unique approach to government/industry cooperation for technology development and transfer

NASA Technical Reports Server (NTRS)

Fulton, Robert E.; Salley, George C.

1985-01-01

A key element to improved industry productivity is effective management of Computer Aided Design / Computer Aided Manufacturing (CAD/CAM) information. To stimulate advancement, a unique joint government/industry project designated Integrated Programs for Aerospace-Vehicle Design (IPAD) was carried out from 1971 to 1984. The goal was to raise aerospace industry productivity through advancement of computer based technology to integrate and manage information involved in the design and manufacturing process. IPAD research was guided by an Industry Technical Advisory Board (ITAB) composed of over 100 representatives from aerospace and computer companies. The project complemented traditional NASA/DOD research to develop aerospace design technology and the Air Force's Integrated Computer Aided Manufacturing (ICAM) program to advance CAM technology. IPAD had unprecedented industry support and involvement and served as a unique approach to government industry cooperation in the development and transfer of advanced technology. The IPAD project background, approach, accomplishments, industry involvement, technology transfer mechanisms and lessons learned are summarized.

The National Shipbuilding Research Program. Application of Industrial Engineering Techniques to Reduce Workers’ Compensation and Environmental Costs - Deliverable G

DTIC Science & Technology

1999-10-01

to prove that we can operate as efficiently as other nations where worker safety and health are emphasized as highly. With the support of government...N8-96-3 Application of Industrial Engineering Techniques to Reduce Workers ’ Compensation and Environmental Costs - Deliverable G U.S. DEPARTMENT OF THE...Techniques to Reduce Workers ’ Compensation and Environmental Costs - Deliverable G 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6

The National Shipbuilding Research Program. 1997 Ship Production Symposium, Paper Number 20: Design and Production of ANZAC Frigates for the RAN and RNZN: Progress Towards International Competitiveness

DTIC Science & Technology

1997-04-01

and New Zealand Industry Involvement ANZIP Australian and New Zealand Industry Program ASSC ANZAC Ship Support Centre ASTEC Australian Science...of performance measurement systems and benchmarking.” In September 1994, the Australian Science, Technology and Engineering Council ( ASTEC ) commenced...more in- depth analysis of the key issues facing Australia in a number of areas. Five Partnerships have been established, one of which is the ASTEC

GATE Center for Automotive Fuel Cell Systems at Virginia Tech

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nelson, Douglas

2011-09-30

The Virginia Tech GATE Center for Automotive Fuel Cell Systems (CAFCS) achieved the following objectives in support of the domestic automotive industry: Expanded and updated fuel cell and vehicle technologies education programs; Conducted industry directed research in three thrust areas development and characterization of materials for PEM fuel cells; performance and durability modeling for PEM fuel cells; and fuel cell systems design and optimization, including hybrid and plug-in hybrid fuel cell vehicles; Developed MS and Ph.D. engineers and scientists who are pursuing careers related to fuel cells and automotive applications; Published research results that provide industry with new knowledge whichmore » contributes to the advancement of fuel cell and vehicle systems commercialization. With support from the Dept. of Energy, the CAFCS upgraded existing graduate course offerings; introduced a hands-on laboratory component that make use of Virginia Tech's comprehensive laboratory facilities, funded 15 GATE Fellowships over a five year period; and expanded our program of industry interaction to improve student awareness of challenges and opportunities in the automotive industry. GATE Center graduate students have a state-of-the-art research experience preparing them for a career to contribute to the advancement fuel cell and vehicle technologies.« less

Editorial input for the right price: tobacco industry support for a sheet metal indoor air quality manual.

PubMed

Campbell, Richard; Balbach, Edith

2013-01-01

Following legal action in the 1990s, internal tobacco industry documents became public, allowing unprecedented insight into the industry's relationships with outside organizations. During the 1980s and 1990s, the National Energy Management Institute (NEMI), established by the Sheet Metal Workers International Association and the Sheet Metal and Air Conditioning Contractors' National Association, (SMACNA) received tobacco industry funding to establish an indoor air quality services program. But the arrangement also required NEMI to serve as an advocate for industry efforts to defeat indoor smoking bans by arguing that ventilation was a more appropriate solution to environmental tobacco smoke. Drawing on tobacco industry documents, this paper describes a striking example of the ethical compromises that accompanied NEMI's collaboration with the tobacco industry, highlighting the solicitation of tobacco industry financial support for a SMACNA indoor air quality manual in exchange for sanitizing references to the health impact of environmental tobacco smoke prior to publication.

Industrial Prep, Volume Four, Junior Year--Contents: Mathematics and Guidance.

ERIC Educational Resources Information Center

Hackensack Public Schools, NJ.

As part of a 3-year comprehensive interdisciplinary program in industrial preparation for vocational students, this 11th Grade teaching guide consists of units on technical mathematics and guidance. Designed as supportive material for related physics and English curriculums, the first four sections of Volume 4 on algebra, vectors, simple machines,…

Are industry financial ties associated with greater scholarly impact among academic otolaryngologists?

PubMed

Svider, Peter F; Bobian, Michael; Lin, Ho-Sheng; Setzen, Michael; Baredes, Soly; Eloy, Jean Anderson; Folbe, Adam J

2017-01-01

In response to concerns regarding physician-industry relationships, the Physician Sunshine Act of 2010 was passed in an effort to increase transparency and accountability. Our objective was to determine whether there is an association between industry support and scholarly impact among academic otolaryngologists. Faculty listings, academic rank, and fellowship training of academic otolaryngologists were accessed from departmental websites. H-indices, number of publications, and publication range (years) of each individual were calculated using the Scopus database. The Center for Medicare and Medicaid Services Open Payments database was used to determine industry payments during 2014 to each otolaryngologist. Of 1,515 otolaryngologists, 65.4% received industry support and 15.8% received support > $1,000. No difference in impact, as measured by the h-index, was noted upon comparison of those receiving support and those who did not (P > 0.05). Individuals receiving > $1,000 had higher h-indices and total publications than those receiving < $1,000 or receiving no support (H = 17.8 vs. 10.9, P < 0.0001), even upon controlling for academic seniority. Upon organization by subspecialty, individuals receiving > $1,000 had greater scholarly impact among most subspecialties. Industry contributions increased with advancing experience. Receiving industry contributions greater than $1,000 is associated with greater scholarly impact among academic otolaryngologists. In a smaller surgical specialty, such as otolaryngology-head and neck surgery, direct industry research support-as well as indirect contributions through the support of educational programs, consulting, and other expenses-potentially impacts scholarly discourse; these findings do not reflect a causal relationship and may require further characterization. NA Laryngoscope, 127:87-94, 2017. © 2016 The American Laryngological, Rhinological and Otological Society, Inc.

[Health surveillance of workers with prior exposure to asbestos. Application in the metallurgy/metal mechanical field].

PubMed

Rivolta, G; Della Foglia, M; Donelli, S; Riboldi, L

2006-01-01

To improve the health surveillance program for workers with a known previous exposure to asbestos in a big metallurgic-mechanical industry from Lombardy, the sources of risk and the different exposure levels hare been reconstructed based on specific jobs. The eligibility criteria and a specific work program including information and organization supports hare been established by a work group composed by health physicians, workers and industrial hygienists. The major goals of the program were: to listen and support each worker who perceives worries about his health status; to prevent, if possible, diseases, especially cancer, resulting from exposure; to document the existing injuries for legal compensation. The resulting actions consist of counselling; indication to follow an adequate life and work style; indication, based on specific request of worker, of sanitary checks of first or eventually second level.

The place of algae in agriculture: policies for algal biomass production.

PubMed

Trentacoste, Emily M; Martinez, Alice M; Zenk, Tim

2015-03-01

Algae have been used for food and nutraceuticals for thousands of years, and the large-scale cultivation of algae, or algaculture, has existed for over half a century. More recently algae have been identified and developed as renewable fuel sources, and the cultivation of algal biomass for various products is transitioning to commercial-scale systems. It is crucial during this period that institutional frameworks (i.e., policies) support and promote development and commercialization and anticipate and stimulate the evolution of the algal biomass industry as a source of renewable fuels, high value protein and carbohydrates and low-cost drugs. Large-scale cultivation of algae merges the fundamental aspects of traditional agricultural farming and aquaculture. Despite this overlap, algaculture has not yet been afforded a position within agriculture or the benefits associated with it. Various federal and state agricultural support and assistance programs are currently appropriated for crops, but their extension to algal biomass is uncertain. These programs are essential for nascent industries to encourage investment, build infrastructure, disseminate technical experience and information, and create markets. This review describes the potential agricultural policies and programs that could support algal biomass cultivation, and the barriers to the expansion of these programs to algae.

NASA industry education initiative. Education programs report, 1991

NASA Technical Reports Server (NTRS)

1991-01-01

Findings from the initial inventory of education programs show that support for the NASA-Industry Education Initiative (NIEI) appears to be strong among the organizations surveyed. In addition, the range, depth and historical baselines of NIEI education programs are encouraging. It is also apparent that there is a significant level of cooperation between NIEI members and other organizations. Heavily focused towards science, engineering, mathematics and technology achievement, NIEI activities appear to be aligned with national education goals. Three criticisms are revealed: (1) the majority of programs are targeted fairly late in the education cycle; (2) the number of initiatives geared towards adult literacy and adult skills-enhancement appears to be relatively low; (3) the majority of NIEI activities involve traditional education-assistance programs, but the number of critical assessment and systematic reform initiatives is low. Four Working Group recommendations resulted from this activity: (1) NIEI Working Group operations should continue for an indefinite period, with participation open to other like-minded private-sector organization; (2) the report should be periodically updated; (3) an analysis of ongoing education programs should be conducted; (4) American corporations should continue to support education and evaluate in-house programs periodically.

NASA Aeronautics Multidisciplinary Analysis and Design Fellowship Program

NASA Technical Reports Server (NTRS)

Grossman, B.; Guerdal, Z.; Haftka, R. T.; Kapania, R. K.; Mason, W. H.; Mook, D. T.

1998-01-01

For a number of years, Virginia Tech had been on the forefront of research in the area of multidisciplinary analysis and design. In June of 1994, faculty members from aerospace and ocean engineering, engineering science and mechanics, mechanical engineering, industrial engineering, mathematics and computer sciences, at Virginia Tech joined together to form the Multidisciplinary Analysis and Design (MAD) Center for Advanced Vehicles. The center was established with the single goal: to perform research that is relevant to the needs of the US industry and to foster collaboration between the university, government and industry. In October of 1994, the center was chosen by NASA headquarters as one of the five university centers to establish a fellowship program to develop a graduate program in multidisciplinary analysis and design. The fellowship program provides full stipend and tuition support for seven U. S. students per year during their graduate studies. To advise us regarding the problems faced by the industry, an industrial advisory board has been formed consisting of representatives from industry as well as government laboratories. The function of the advisory board is to channel information from its member companies to faculty members concerning problems that need research attention in the general area of multidisciplinary design optimization (MDO). The faculty and their graduate students make proposals to the board on how to address these problems. At the annual board meeting in Blacksburg, the board discusses the proposals and suggests which students get funded under the NASA fellowship program. All students participating in the program are required to spend 3-6 months in industry working on their research projects. We are completing the third year of the fellowship program and have had three advisory board meetings in Blacksburg.

Politics and Procurement: The Clast Between Local Interest and Strategic Imperative in U.S. Defense Acquisition

DTIC Science & Technology

2014-06-01

the troops would be political suicide for elected officials. Consequently, government-supported programs have grown to enormous proportions and have...favored programs because to do so would mean terminating government-supported jobs in their districts, another form of political suicide . According to...Colonel Henry K. Craig, and President Pierce’s Secretary of War, Jefferson Davis, resisted any temptation to commercialize the military industry. In

The Impact of Supported Employment Versus Standard Vocational Rehabilitation in Veterans with PTSD

DTIC Science & Technology

2014-08-01

Compensated Work Therapy/Veterans Industries ( CWT ) and provides a work regimen with monetary incentives derived from contracts whereby participants are...Compensated Work Therapy ( CWT ) programs, found that the rate of competitive employment at discharge was only 30% for Veterans with PTSD and 36% for...adaptation to CWT programming and personnel, and so clear substantial evidence is needed to support such a dramatic change. Such modifications in the VA

Workplace Breastfeeding Support Varies by Employment Type: The Service Workplace Disadvantage.

PubMed

Snyder, Kailey; Hansen, Kelli; Brown, Sara; Portratz, Amy; White, Kate; Dinkel, Danae

The majority of women are returning to work full-time after childbirth, and support within their place of employment may influence intention and duration for breastfeeding, but more research is needed. Therefore, the purpose of this study was to explore the influence of employment type on breastfeeding duration upon return to work by examining informal (i.e., verbal encouragement) and direct (i.e., lactation space, flexible time) factors of support. This was a retrospective survey of women's returning-to-work experiences while breastfeeding. Survey contents included respondent demographics as well as questions surrounding perceptions of employer support, work environment, and goal/satisfaction regarding breastfeeding. Data were analyzed via crosstabs and chi-square goodness of fit tests. A total of 1,002 women completed the survey. Significant differences were seen across different employment types. Women within the professional/management industry were most likely to receive informal and direct support for breastfeeding upon return to work. Women within the service industry and production/transportation industry reported receiving the lowest levels of informal and direct support. Workplace support varies by employment type and women in the service and production/transportation industry appear to be at a disadvantage compared with other employment types. There is a need for more breastfeeding support programs to be developed that target specific workplace characteristics.

Contractor Sales Training: Providing the Skills Necessary to Sell Comprehensive Home Energy Upgrades

DOE Office of Scientific and Technical Information (OSTI.GOV)

Billingsley, Megan; Stuart, Elizabeth

2011-08-17

Many comprehensive home energy efficiency programs rely on contractors as the customer-facing ‘front line’ to sell energy improvements. Adding sales skills to contractors’ existing technical expertise is key to converting more assessments into comprehensive home energy upgrades. Leading programs recognize the need to support contractors with sales and business training to help them succeed and to support the growth of the home performance industry for the long term. A number of contractor sales training efforts are emerging, including some programs that are seeing encouraging early results.

Physics Education in a Multidisciplinary Materials Research Environment

NASA Astrophysics Data System (ADS)

Doyle, W. D.

1997-03-01

The MINT Center, an NSF Materials Research Science and Engineering Center, is a multidisciplinary research program focusing on materials information storage. It involves 17 faculty, 10 post-doctoral fellows and 25 graduate students from six academic programs including Physics, Chemistry, Materials Science, Metallurgical and Materials Engineering, Electric al Engineering and Chemical Engineering, whose research is supported by university, federal and industrial funds. The research facilities (15,000 ft^2) which include faculty and student offices are located in one building and are maintained by the university and the Center at no cost to participating faculty. The academic requirements for the students are determined by the individual departments along relatively rigid, traditional grounds although several materials and device courses are offered for students from all departments. Within the Center, participants work in teams assigning responsibilities and sharing results at regularly scheduled meetings. Bi-weekly research seminars for all participants provide excellent opportunities for students to improve their communication skills and to receive critical input from a large, diverse audience. Strong collaboration with industrial partners in the storage industry supported by workshops, research reviews, internships, industrial visitors and participation in industry consortia give students a broader criteria for self-evaluation, higher motivation and excellent career opportunities. Physics students, because of their rigorous basic training, are an important element in a strong materials sciences program, but they often are deficient in the behavior and characterization of real materials. The curriculum for physics students should be broadened to prepare them fully for a rewarding career in this emerging discipline.

Knowledge Management and Information Technology in Customer Support: A Quantitative Assessment of the U.S. Navy's Distance Support Program

ERIC Educational Resources Information Center

O'Malley, Kevin Dermit

2010-01-01

Centralized customer support is an established industry method used to improve revenue and profitability. What remains unknown is whether this cost-saving commercial business practice is similarly applicable to the unique, often isolated military environment. This research study statistically tested a theoretical framework for knowledge management…

Policy analysis of the budget used in training program for reducing lower back pain among heavy equipment operators in the construction industry: System dynamics approach

NASA Astrophysics Data System (ADS)

Vitharana, V. H. P.; Chinda, T.

2018-04-01

Lower back pain (LBP), prevalence is high among the heavy equipment operators leading to high compensation cost in the construction industry. It is found that proper training program assists in reducing chances of having LBP. This study, therefore aims to examine different safety related budget available to support LBP related training program for different age group workers, utilizing system dynamics modeling approach. The simulation results show that at least 2.5% of the total budget must be allocated in the safety and health budget to reduce the chances of having LBP cases.

Air Force Tech Order Management System (AFTOMS). Automation Plan-Final Report. Version 1.0

DOT National Transportation Integrated Search

1988-02-01

Computer aided Acquisition and Logistics Support (CALS) is a Department of Defense (DoD) program designed to improve weapon systems support through digital automation. In June 1985, the joint industry/DoD Task Force on CALS issued a five volume repor...

77 FR 51814 - Draft Guidance for Industry on Generic Drug User Fee Amendments of 2012: Questions and Answers...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-27

... costs to industry. GDUFA enables FDA to assess user fees to support critical and measurable enhancements... critical and measurable enhancements to FDA's generic drugs program. GDUFA establishes fees for abbreviated... current thinking on generic drug user fee amendments of 2012. It does not create or confer any rights for...

Chemical engineering: Measurements for a competitive age

NASA Technical Reports Server (NTRS)

1986-01-01

The NIST (National Institute of Standards and Technology) activities supporting chemical research, environmental research, combustion and fuel research, and related industries are described in this video. Highlights include private sector involvement in the research and associated and guest scientist programs, the calibration of customers' instruments, and the direct funding for the NIST research projects by outside industries.

76 FR 51435 - Request for Certification of Compliance; Rural Industrialization Loan and Grant Program

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-18

... Product/Purpose: The loan, guarantee, or grant application is to support the expansion of business to the... Department of Agriculture to make or guarantee loans or grants to finance industrial and business activities... result in: (a) A transfer of any employment or business activity from one area to another by the loan...

Cooperative Science: A National Study of University and Industry Researchers. Case Studies. Volume II.

ERIC Educational Resources Information Center

Johnson, Elmima C.; And Others

This report presents nine case studies of Industry/University Cooperative Research (IUCR) projects supported during 1978-1980 by the National Science Foundation. The intent of this document is to provide readers with a qualitative picture of cooperative science as practiced under the IUCR program. The information presented in this report is…

75 FR 80040 - Manufacturing Council

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-21

..., developing and marketing programs in support of manufacturing industries, job creation in the manufacturing... relevant contact information such as mailing address, fax, e-mail, fixed and mobile phone numbers and...

Knowledge of the Television Industry and Relevant First-Hand Experience.

ERIC Educational Resources Information Center

Phelps, Erin M.

Potential profits in terms of advertising supports and audience size are usually the determinants of what entertainment programs are broadcast on television. Interviews conducted with children, adolescents, and adults show that understanding of this economic basis for the selection process for entertainment programming increases with age. This…

Optimizing Web-Based Instruction: A Case Study Using Poultry Processing Unit Operations

ERIC Educational Resources Information Center

O' Bryan, Corliss A.; Crandall, Philip G.; Shores-Ellis, Katrina; Johnson, Donald M.; Ricke, Steven C.; Marcy, John

2009-01-01

Food companies and supporting industries need inexpensive, revisable training methods for large numbers of hourly employees due to continuing improvements in Hazard Analysis Critical Control Point (HACCP) programs, new processing equipment, and high employee turnover. HACCP-based food safety programs have demonstrated their value by reducing the…

Careers in Construction: Construction Industry Series: Student Manual and Instructor's Guide.

ERIC Educational Resources Information Center

Texas Education Agency, Austin. Dept. of Occupational Education and Technology.

The guide for instructors of construction occupations provides instructional suggestions and informational sources for structuring an exploratory program. The program is divided into the following blocks, representing different experiences in construction: (1) wood; (2) finishing; (3) engineering, support, and management services; (4) metal; (5)…

Provision of Academic Support Services to Adults in Distance Education Programs.

ERIC Educational Resources Information Center

Manzo, David A.

Demographic changes and economic need have driven higher education institutions to become more flexible in educational programming and to forge bonds with business and industry. Technological advancements such as satellite communications and computers have helped facilitate these partnerships between education and the business community. In many…

Annual Summary. Training and Technology Experimentation, Demonstration, and Utilization Program Activities (January 1-December 31, 1971).

ERIC Educational Resources Information Center

Oak Ridge Associated Universities, TN.

Directed primarily toward increasing utilization of industrial resources for training and development of disadvantaged persons, Training and Technology (TAT) activities for 1971 included: (1) development and implementation of experimental approaches to program development and operation, (2) technical support for university-conducted related…

Learning To Work Smarter.

ERIC Educational Resources Information Center

Baldwin, Fred D.

2001-01-01

With support from federal grants and area industry, the Alfred State College of Technology in New York's Southern Tier is training future workers for high-skill manufacturing jobs. The college offers certification and associate's degree programs in welding and machine-tool technology and is developing a training program in computer technology.…

Formal verification and testing: An integrated approach to validating Ada programs

NASA Technical Reports Server (NTRS)

Cohen, Norman H.

1986-01-01

An integrated set of tools called a validation environment is proposed to support the validation of Ada programs by a combination of methods. A Modular Ada Validation Environment (MAVEN) is described which proposes a context in which formal verification can fit into the industrial development of Ada software.

RNGR: A national resource for reforestation, restoration, and nursery professionals

Treesearch

Diane L. Haase; Jeremiah R. Pinto; R. Kasten Dumroese; George Hernandez; Bob Karrfalt; Ron Overton

2011-01-01

The Forest Service developed the national Reforestation, Nurseries, and Genetics Resources (RNGR) program to provide expert support to State, industrial, and private forest and conservation nurseries throughout the country. The RNGR program includes technical assistance to nurseries, research projects (to address seedling and field issues), and Internet sites. RNGR...

1991 NASA Life Support Systems Analysis workshop

NASA Technical Reports Server (NTRS)

Evanich, Peggy L.; Crabb, Thomas M.; Gartrell, Charles F.

1992-01-01

The 1991 Life Support Systems Analysis Workshop was sponsored by NASA Headquarters' Office of Aeronautics and Space Technology (OAST) to foster communication among NASA, industrial, and academic specialists, and to integrate their inputs and disseminate information to them. The overall objective of systems analysis within the Life Support Technology Program of OAST is to identify, guide the development of, and verify designs which will increase the performance of the life support systems on component, subsystem, and system levels for future human space missions. The specific goals of this workshop were to report on the status of systems analysis capabilities, to integrate the chemical processing industry technologies, and to integrate recommendations for future technology developments related to systems analysis for life support systems. The workshop included technical presentations, discussions, and interactive planning, with time allocated for discussion of both technology status and time-phased technology development recommendations. Key personnel from NASA, industry, and academia delivered inputs and presentations on the status and priorities of current and future systems analysis methods and requirements.

Financing commercial RLVs: Considering government incentives

NASA Astrophysics Data System (ADS)

Greenberg, Joel S.

1997-01-01

There appears to be a national goal to achieve a commercial space transportation industry that provides launch services utilizing a fleet of reusable launch vehicles (RLVs). Because of the combination of large required investment, inadequate rate of return, and perceived high risk, industry has indicated that this goal may not be achievable without government support. What form of government support will likely be necessary? Government programs and policies can effect private sector investment decisions by reducing risk perceptions, reducing capital requirements, and increasing expected rates of return. Different programs and policies will have different impacts. For example, tax policies will affect expected return on investment but are likely to have little or no effect on risk perceptions and magnitude of required investment, whereas anchor tenancy is likely to alter risk perceptions and may increase expected rates of return. This paper is concerned with the development of an approach that may be used to identify packages of government incentives that may be required to influence private sector investment decisions so as to achieve the desired goal of a commercial space transportation industry that provides launch services utilizing a fleet of RLVs. The paper discusses the relationship of government incentive programs and policies to the RLV investment decision.

Molten nitrate salt technology development

NASA Astrophysics Data System (ADS)

Carling, R. W.

1981-04-01

This paper presents an overview of the experimental programs underway in support of the Thermal Energy Storage for Solar Thermal Applications (TESSTA) program. The experimental programs are concentrating on molten nitrate salts which have been proposed as heat transfer and energy storage medium. The salt composition of greatest interest is drawsalt, nominally a 50-50 molar mixture of NaNO3 and KNO3 with a melting point of 220 C. Several technical uncertainties have been identified that must be resolved before nitrate based solar plants can be commercialized. Research programs at Sandia National Laboratories, universities, and industrial suppliers have been implemented to resolve these technical uncertainties. The experimental programs involve corrosion, decomposition, physical properties, and environmental cracking. Summaries of each project and how they impact central receiver applications such as the repowering/industrial retrofit and cogeneration program are presented.

Impact of Commercial Support on Continuing Pharmacy Education

ERIC Educational Resources Information Center

Smith, Jayne L.; Cervero, Ronald M.; Valentine, Thomas

2006-01-01

Introduction: There is a serious debate over the involvement of the pharmaceutical industry in continuing education. Policies that govern the planning of continuing education for pharmacists center on the potential conflict of interest when there is commercial support for programs. The purpose of this study was to investigate the impact of…

Winning a Stake in America.

ERIC Educational Resources Information Center

Workplace Education, 1982

1982-01-01

The life and health insurance industry has begun to stimulate and support community initiatives to train and place the hard-to-employ disadvantaged in private sector jobs. Program activities include a variety of counseling, training, education, and support services. Available from W.C. Publications, Inc., P.O. Box 1578, Montclair, NJ 07042. (SK)

A Collection of Technical Studies Completed for the Computer-Aided Acquisition and Logistic Support (CALS) Program Fiscal Year 1988. Volume 2. Graphics, CGM MIL SPEC

DTIC Science & Technology

1991-03-01

test cases are gathered, studied, and evaluated; industry and other national European programs are studied; and experience is gained. This evolution ...application callable layer. The CGM Generator can be used to record device-independent picture descriptions. conceptually in parallel with the...contributors: I Organization Peter R. Bono Associates, Inc. Secretarial Support Susan Bonde , Diane Bono, E!aine Bono, Brenda Carson, Gillian Hall

Photovoltaic energy program overview, fiscal year 1991

NASA Astrophysics Data System (ADS)

1992-02-01

The Photovoltaics Program Plan, FY 1991 to FY 1995 builds on the accomplishments of the past 5 years and broadens the scope of program activities for the future. The previous plan emphasized materials and PV cell research. Under the balanced new plan, the PV Program continues its commitment to strategic research and development (R&D) into PV materials and processes, while also beginning work on PV systems and helping the PV industry encourage new markets for photovoltaics. A major challenge for the program is to assist the US PV industry in laying the foundation for at least 1000 MW of installed PV capacity in the United States and 500 MW internationally by 2000. As part of the new plan, the program expanded the scope of its activities in 1991. The PV Program is now addressing many new aspects of developing and commercializing photovoltaics. It is expanding activities with the US PV industry through the PV Manufacturing Technology (PVMaT) project, designed to address US manufacturers' immediate problems; providing technical assistance to potential end users such as electric utilities; and the program is turning its attention to encouraging new markets for PV. In 1991, for example, the PV Program initiated a new project with the PV industry to encourage a domestic market for PV applications in buildings and began cooperative ventures to support other countries such as Mexico to use PV in their rural electrification programs. This report reviews some of the development, fabrication and manufacturing advances in photovoltaics this year.

NASA Aeronautics Multidisciplinary Analysis and Design Fellowship Program

NASA Technical Reports Server (NTRS)

Grossman, B.; Gurdal, Z.; Kapania, R. K.; Mason, W. H.; Schetz, J. A.

1999-01-01

This program began as a grant from NASA Headquarters, NGT-10025, which was in effect from 10/l/93 until 10/31/96. The remaining funding for this effort was transferred from NASA Headquarters to NASA Langley and a new grant NGT-1-52155 was issued covering the period II/l/96 to 5/15/99. This report serves as the final report of NGT-1-52155. For a number of years, Virginia Tech had been on the forefront of research in the area of multidisciplinary analysis and design. In June of 1994, faculty members from aerospace and ocean engineering, engineering science and mechanics, mechanical engineering, industrial engineering, mathematics and computer sciences, at Virginia Tech joined together to form the Multidisciplinary Analysis and Design (MAD) Center for Advanced Vehicles. The center was established with the single goal: to perform research that is relevant to the needs of the US industry and to foster collaboration between the university, government and industry. In October of 1994, the center was chosen by NASA headquarters as one of the five university centers to establish a fellowship program to develop a graduate program in multidisciplinary analysis and design. The fellowship program provides full stipend and tuition support for seven U. S. students per year during their graduate studies. The grant is currently being administered by the NMO Branch of NASA Langley. To advise us regarding the problems faced by the industry, an industrial advisory board has been formed consisting of representatives from industry as well as government laboratories. The present membership includes major aerospace companies: Aurora Flight Sciences, Boeing: Philadelphia, Boeing: Long Beach, Boeing: Seattle, Boeing: St. Louis, Cessna, Ford, General Electric, Hughes, Lockheed-Martin: Palo Alto, Northrop-Grumman, Sikorsky, smaller, aerospace software companies: Aerosoft, Phoenix Integration and Proteus Engineering, along with representatives from government agencies, including: NASA Ames, Langley and Lewis. The function of the advisory board is to channel information from its member companies to faculty members concerning problems that need research attention in the general area of multidisciplinary design optimization (MDO). The faculty and their graduate students make presentations to the board on their research. The board makes recommendations on the research and suggests new areas and problems which need attention. Many students participating in the program spend 3-6 months in industry working on their research projects. We are completing the fifth year of the fellowship program and have had four advisory board meetings in Blacksburg. Ten students have spent the three month periods in industry. In addition to the research element of the MAD Center efforts we also have an academic component. We have developed a menu of design-related graduate courses and two new courses: one in Aerospace Manufacturing and another in MDO. Some of the MAD Center activities are described on the world-wide web at http://www.aoe.vt.edu/mads.html The MAD Center represents an innovative approach for joint Industry-Government-University cooperation in the development of a comprehensive program in engineering education which addresses the design needs of industry. The following charts list detail of the grant: mission of the MAD center, faculty members, purpose of the advisory board, board members, summary of the graduate and undergraduate program, history of the fellowship program, mission of the fellowship program, requirements of MAD fellows, course requirements, students supported, advisory board participants, and MAD center research papers

Scientific Research and Corporate Influence: Smoking, Mental Illness, and the Tobacco Industry

PubMed Central

Hirshbein, Laura

2012-01-01

Mentally ill individuals have always smoked at high rates and continue to do so, despite public health efforts to encourage smoking cessation. In the last half century, the tobacco industry became interested in this connection, and conducted and supported psychiatric and basic science research on the mental health implications of smoking, long before most mental health professionals outside the industry investigated this issue. Initially, representatives of tobacco industry research organizations supported genetics and psychosomatic research to try to disprove findings that smoking causes lung cancer. Tobacco industry research leaders engaged with investigators because of shared priorities and interests in the brain effects of nicotine. By the 1980s, collaborative funding programs and individual company research and development teams engaged in intramural and extramural basic science studies on the neuropharmacology of nicotine. When mental health researchers outside the industry became interested in the issue of the mentally ill and smoking in the mid-1990s, they increasingly explained it in terms of a disease of nicotine addiction. Both the idea that smoking/nicotine does something positive for the mentally ill and the conclusion that it is the result of nicotine dependence have the potential to support corporate agendas (tobacco or pharmaceutical). PMID:21596723

Scientific research and corporate influence: smoking, mental illness, and the tobacco industry.

PubMed

Hirshbein, Laura

2012-07-01

Mentally ill individuals have always smoked at high rates and continue to do so, despite public health efforts to encourage smoking cessation. In the last half century, the tobacco industry became interested in this connection, and conducted and supported psychiatric and basic science research on the mental health implications of smoking, long before most mental health professionals outside the industry investigated this issue. Initially, representatives of tobacco industry research organizations supported genetics and psychosomatic research to try to disprove findings that smoking causes lung cancer. Tobacco industry research leaders engaged with investigators because of shared priorities and interests in the brain effects of nicotine. By the 1980s, collaborative funding programs and individual company research and development teams engaged in intramural and extramural basic science studies on the neuropharmacology of nicotine. When mental health researchers outside the industry became interested in the issue of the mentally ill and smoking in the mid-1990s, they increasingly explained it in terms of a disease of nicotine addiction. Both the idea that smoking/nicotine does something positive for the mentally ill and the conclusion that it is the result of nicotine dependence have the potential to support corporate agendas (tobacco or pharmaceutical).

Operator Performance Support System (OPSS)

DTIC Science & Technology

1992-02-01

both the military and the industry. The OPSS will propose practical application’ in how to more closely align the relationships between technical...industry. The OPSS will propose practical applications in how to more closely align the relationships between technical knowledge and equipment operator...commercial programs provide flexibility to suppori existing and futurc kourscware and "hardware enhancements. In the development process of the OPSS

Do drug-free workplace programs prevent occupational injuries? Evidence from Washington State.

PubMed

Wickizer, Thomas M; Kopjar, Branko; Franklin, Gary; Joesch, Jutta

2004-02-01

To evaluate the effect of a publicly sponsored drug-free workplace program on reducing the risk of occupational injuries. Workers' compensation claims data from the Washington State Department of Labor and Industries covering the period 1994 through 2000 and work-hours data reported by employers served as the data sources for the analysis. We used a pre-post design with a nonequivalent comparison group to assess the impact of the intervention on injury risk, measured in terms of differences in injury incidence rates. Two hundred and sixty-one companies that enrolled in the drug-free workplace program during the latter half of 1996 were compared with approximately 20,500 nonintervention companies. We tested autoregressive, integrated moving-average (ARIMA) models to assess the robustness of our findings. The drug-free workplace intervention was associated (p < .05) with a statistically significant decrease in injury rates for three industry groups: construction, manufacturing, and services. It was associated (p < .05) with a reduction in the incidence rate of more serious injuries involving four or more days of lost work time for two industry groups: construction and services. The ARIMA analysis supported The drug-free workplace program we studied was associated with a selective, industry-specific preventive effect. The strongest evidence of an intervention effect was for the construction industry. Estimated net cost savings for this industry were positive though small in magnitude.

Department of Defense statement on the X-ray Lithography Program to the Research and Development Subcommittee of the House Armed Services Committee of 100th Congress, second session

NASA Astrophysics Data System (ADS)

Maynard, E. D., Jr.

1988-03-01

The Department has a broad and necessarily diverse program in semiconductor science and technology. The three principal goals of that effort are: Reduce the gap between commercial integrated circuit usage and its deployment in military systems, assure a healthy on-shore industrial base to support our defense needs, enhance the producibility of specialized military semiconductor products. The major effort to achieve the first of these objectives is the Very High Speed Integrated Circuits (VHSIC) Program which is nearing completion. The Microwave/millimeter wave Monolithic Integrated Circuit (MIMIC) program has just completed a study program to define the product mix needed to meet military system requirements for radar, electronic warfare, smart weapons and telecommunications. We are bringing together the system requirements of all DoD with the device fabrication and product delivery capabilities of industry in an Infrared Focal Plane Array (IRFPA) program. The goal of the Software Initiative is to enhance our warfighting capability through development of efficient software generation technology and products plus the creation of a technology infusion infrastructure to couple the technology and products to system applications. The X-Ray Lithography Program will begin to establish the industrial base which will be required to sustain U.S. leadership in the semiconductor industry for the late 1990s.

Space nuclear power: Key to outer solar system exploration

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bennett, G.L.; Allen, D.M.

1998-07-01

In 1995, in response to threatened budget cuts, the American Institute of Aeronautics and Astronautics (AIAA) approved a position paper supporting the maintenance of the technology base for space nuclear power. The position paper contained four recomemndations: (1) DOE, NASA, and DoD should develop and support an integrated program that maintains the nuclear option and develops the needed high-payoff technologies; (2) Congress should provide strong, continuing financial and political support for the agencies' program; (3) Government and industry leaders should voice their advocacy for a strong space nuclear power program to support future system requirements; and (4) The US shouldmore » continue to maintain its cooperation and technical interchanges with other countries to advance nuclear power source technology and to promote nuclear safety.« less

Exploring the Lived Experiences of Program Managers Regarding an Automated Logistics Environment

ERIC Educational Resources Information Center

Allen, Ronald Timothy

2014-01-01

Automated Logistics Environment (ALE) is a new term used by Navy and aerospace industry executives to describe the aggregate of logistics-related information systems that support modern aircraft weapon systems. The development of logistics information systems is not always well coordinated among programs, often resulting in solutions that cannot…

Development of vaccines for poultry against H5 avian influenza based on turkey herpesvirus vector

USDA-ARS?s Scientific Manuscript database

Avian influenza (AI) remains a major threat to public health as well as to the poultry industry. AI vaccines are considered a suitable tool to support AI control programs in combination with other control measures such as good biosecurity and monitoring programs. We constructed recombinant turkey he...

Business and Marketing Education Programs in Georgia: Focus Groups Examine Issues for Program Reform.

ERIC Educational Resources Information Center

Womble, Myra J.; Adams, J. Elaine; Stitt-Gohdes, Wanda L.

2000-01-01

Focus groups with 25 business and 18 marketing teachers and 6 business/industry representatives elicited the following opinions: the primary purpose of business/marketing education is work force preparation; dedicated faculty and administrative support are ideal features; a strong voice for vocational education is needed; and important skill areas…

The Cutting-Edge Challenge

ERIC Educational Resources Information Center

Share, Joani

2005-01-01

In a time of educational budget cuts, the arts seem to take the major brunt of the financial ax. Fine arts programs are often pitted against one another for survival. The music industry and supporting corporations, such as American Express, campaign to have instruments donated or purchased to keep educational programs alive. The visual arts do not…

Leadership and Funding: Changes Ahead for Agricultural Safety and Health.

PubMed

Murphy, Dennis J; Lee, Barbara C

2018-01-01

For the last several decades, financial support for agricultural safety and health programs and professionals has primarily been covered by public dollars through federal and state government grant programs and appropriations. This federal and state funding provided a tremendous boost to farm safety and health professionals and program efforts for 30+ years and has provided the foundation and structure for current agricultural safety and health efforts and activities. However, there is reason to question long-term sustainability of a sufficient level of federal and state dollars for agricultural safety and health. Public funding for agricultural safety and health has never quite kept up to inflation, but even more ominous is that the entire agricultural safety and health program has been proposed for elimination each year by the White House budget beginning with the fiscal year 2012. It seems prudent, perhaps even imperative, for the agricultural safety and health community to find alternative support mechanisms. We suggest that now is a great time for agricultural businesses, services, and organizations to step up their financial support. Fortunately, several positive examples have recently surfaced within the agricultural community. As the agricultural industry continues to be a dominant enterprise in the United States, the integration of significant funding and the role of leadership from within the industry must continue to expand.

Combining total energy and energy industrial center concepts to increase utilization efficiency of geothermal energy

NASA Technical Reports Server (NTRS)

Bayliss, B. P.

1974-01-01

Integrating energy production and energy consumption to produce a total energy system within an energy industrial center which would result in more power production from a given energy source and less pollution of the environment is discussed. Strong governmental support would be required for the crash drilling program necessary to implement these concepts. Cooperation among the federal agencies, power producers, and private industry would be essential in avoiding redundant and fruitless projects, and in exploiting most efficiently our geothermal resources.

Monitored Natural Attenuation as a Remediation Strategy for Nuclear Power Plant Applications

NASA Astrophysics Data System (ADS)

Kim, K.; Bushart, S.

2009-12-01

A NRC Information Notice (IN 2006-13) was produced to inform holders of nuclear operating licenses “of the occurrence of radioactive contamination of ground water at multiple facilities due to undetected leakage from facility structures, systems, or components (SSCs) that contain or transport radioactive fluids” so that they could consider actions, as appropriate, to avoid similar problems. To reinforce their commitment to environmental stewardship the nuclear energy industry has committed to improving management of situations that have the potential to lead to the inadvertent release of radioactive fluids. This Industry Groundwater Protection Initiative, finalized in June 2007 as [NEI 07-07], calls for implementation and improvement of on-site groundwater monitoring programs and enhanced communications with stakeholders and regulators about situations related to inadvertent releases. EPRI developed its Groundwater Protection Program to provide the nuclear energy industry with the technical support needed to implement the Industry Groundwater Initiative. An objective of the EPRI Groundwater Protection Program is to provide the nuclear industry with technically sound guidance for implementing and enhancing on-site groundwater monitoring programs. EPRI, in collaboration with the EPRI Groundwater Protection Committee of utility members, developed the EPRI Groundwater Protection Guidelines for Nuclear Power Plants (EPRI Report 1015118, November 2007), which provides site-specific guidance for implementing a technically sound groundwater monitoring program. The guidance applies a graded approach for nuclear plants to tailor a technically effective and cost efficient groundwater monitoring program to the site’s hydrogeology and risk for groundwater contamination. As part of the Groundwater Protection Program, EPRI is also investigating innovative remediation technologies for addressing low-level radioactive contamination in soils and groundwater at nuclear power plant sites. One of these remediation technologies is monitored natural attenuation (MNA), which has been widely used in other industries for the remediation of contaminants in soil and groundwater. Monitored natural attenuation (MNA) is a non-intervention, but not a no-action, groundwater and soil remediation approach that involves monitoring the dilution, dispersion, and decay of contaminants to meet remediation objectives. MNA has been commonly applied at sites where soil and groundwater have been contaminated by volatile organic compounds. This method has also been applied to remediation of radiological contamination at U.S. DOE facilities and decommissioning nuclear power plant sites. The EPRI published report (1016764) provides guidance for implementing MNA at nuclear power plants for remediation of radiological contaminants in groundwater and soil. The goal of the EPRI Groundwater Protection program is to bring together experience and technologies - both from within the nuclear industry and other industries - to support the industry’s commitment to environmental stewardship. Results from the program are being published in an extensive series of reports and software, and are being communicated to members in an annual EPRI Groundwater Protection technical exchange workshop.

National Cycle Program (NCP) Common Analysis Tool for Aeropropulsion

NASA Technical Reports Server (NTRS)

Follen, G.; Naiman, C.; Evans, A.

1999-01-01

Through the NASA/Industry Cooperative Effort (NICE) agreement, NASA Lewis and industry partners are developing a new engine simulation, called the National Cycle Program (NCP), which is the initial framework of NPSS. NCP is the first phase toward achieving the goal of NPSS. This new software supports the aerothermodynamic system simulation process for the full life cycle of an engine. The National Cycle Program (NCP) was written following the Object Oriented Paradigm (C++, CORBA). The software development process used was also based on the Object Oriented paradigm. Software reviews, configuration management, test plans, requirements, design were all apart of the process used in developing NCP. Due to the many contributors to NCP, the stated software process was mandatory for building a common tool intended for use by so many organizations. The U.S. aircraft and airframe companies recognize NCP as the future industry standard for propulsion system modeling.

Old age income security in Canada.

PubMed

Willard, J W

1965-10-09

The position of older people in modern industrial society is markedly removed from the early industrial norm of continued participation in gainful employment until the end of life. Acceptance of a retirement age some 13 years before the end of average male life expectancy has brought with it serious social problems. At the same time, however, an increasingly productive economy has provided both the willingness and ability to complement the retirement provisions of individual initiative with public programs of old age income maintenance. This public support began in Canada with the voluntary approach embodied in the government annuities plan. A program of "public assistance" followed. These were succeeded, first, by the "universal payment" under the Old Age Security Act and, more recently, by the social insurance approach of the Canada Pension Plan. Along with improved public support, the role of occupational pension plans and of individually initiated retirement provisions continues to be substantial. Current interest in, and in some cases legislation on, such problems as vesting and solvency are leading to improvements in private pension programs.

Interdisciplinary Facilities that Support Collaborative Teaching and Learning

ERIC Educational Resources Information Center

Asoodeh, Mike; Bonnette, Roy

2006-01-01

It has become widely accepted that the computer is an indispensable tool in the study of science and technology. Thus, in recent years curricular programs such as Industrial Technology and associated scientific disciplines have been adopting and adapting the computer as a tool in new and innovative ways to support teaching, learning, and research.…

BCTR: Biological and Chemical Technologies Research 1994 annual summary report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Petersen, G.

1995-02-01

The annual summary report presents the fiscal year (FY) 1994 research activities and accomplishments for the United States Department of Energy (DOE) Biological and Chemical Technologies Research (BCTR) Program of the Advanced Industrial Concepts Division (AICD). This AICD program resides within the Office of Industrial Technologies (OIT) of the Office of Energy Efficiency and Renewable Energy (EE). Although the OIT was reorganized in 1991 and AICD no longer exists, this document reports on efforts conducted under the former structure. The annual summary report for 1994 (ASR 94) contains the following: program description (including BCTR program mission statement, historical background, relevance,more » goals and objectives); program structure and organization, selected technical and programmatic highlights for 1994; detailed descriptions of individual projects; a listing of program output, including a bibliography of published work; patents, and awards arising from work supported by BCTR.« less

Advanced gas turbine systems program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zeh, C.M.

1995-06-01

The U.S. Department of Energy (DOE) is sponsoring a program to develop fuel-efficient gas turbine-based power systems with low emissions. DOE`s Office of Fossil Energy (DOE/FE) and Office of Energy Efficiency and Renewable Energy (DOE/EE) have initiated an 8-year program to develop high-efficiency, natural gas-fired advanced gas turbine power systems. The Advanced Turbine Systems (ATS) Program will support full-scale prototype demonstration of both industrial- and utility-scale systems that will provide commercial marketplace entries by the year 2000. When the program targets are met, power system emissions will be lower than from the best technology in use today. Efficiency of themore » utility-scale units will be greater than 60 percent on a lower heating value basis, and emissions of carbon dioxide will be reduced inversely with this increase. Industrial systems will also see an improvement of at least 15 percent in efficiency. Nitrogen oxides will be reduced by at least 10 percent, and carbon monoxide and hydrocarbon emissions will each be kept below 20 parts per million, for both utility and industrial systems.« less

Science in action: An interdisciplinary science education program

NASA Technical Reports Server (NTRS)

Horton, Linda L.

1992-01-01

Science in Action is an education outreach program for pre-collegiate students. It is based on the concept that, in order to interest students in science, they must see science and scientists at work. The program encompasses the full range of scientific disciplines - the core sciences, engineering, and mathematics. A unique aspect of the program is the involvement and support of scientists and engineers representing local professional societies, industries, business, and academic institutions. An outline of the program is given.

EPA USDA Agricultural Equipment Statement of Principles

EPA Pesticide Factsheets

The Agricultural Equipment Statement of Principles was developed jointly between EPA and USDA at the request of agriculture industry stakeholders seeking support for programs to assist farmers looking to invest in cleaner agricultural equipment

Final Report: Northern Virginia Community College Training for Biotechnology Workers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Weiss, Johanna V

The intent of this project was to expand Northern Virginia Community College's capability to offer training to support the Biotechnology Industry in the northern Virginia region. The general goal of this project was to create a College Biotechnology Program; specific goals of the project were to a) design curricula/courses to prepare students to become entry-level lab technicians, b) redesign and equip lab space to better suit the needs of the program, c) develop partnerships with the local industry through outreach and the formation on an advisory board, d) recruit students into the program, and e) provide instructional support for localmore » high school teachers. At the end of the grant period, NOVA has successfully created two new curricula in biotechnology: an Associate of Applied Science (A.A.S.) in Biotechnology (initiated in Fall 2008) and a Career Studies Certificate for Biotechnology Lab Technicians (to be initiated in Fall 2010). These curricula were designed with advice from an external advisory committee which is comprised of representatives from industry, transfer institutions and high school administrators. To date, almost all courses have been designed and piloted; the equipment needed for the courses and the initial supplies were paid for by the grant as was the re-modeling of some lab space to be used for the biotech courses. In order to market the program, the NOVA Biotech Program has also established relationships with the local high schools. Presentations were given at several local high schools and on-site workshops were held for high school students and teachers. As a result, close to 1000 students have attended program open houses, presentations within the high schools, or workshops held in the summer. Over 100 teachers have received information and/or training in biotechnology. These outreach efforts as well as high quality curricula have started to attract a number of students to the program – for example, there are currently 70 students enrolled in the A.A.S. program. The first students in the biotech program are expected to graduate in Spring 2011; already, students enrolled in the biotech program/courses have obtained jobs or internships in several local companies. Our current goal continues to be to foster the formation of a regional biotech education pipeline into the local industry which includes the recruitment of individuals into the NOVA Biotech Program, the training and graduation of highly-skilled lab technicians, and the placement of graduates in local biotech industry jobs.« less

SPIN-UP and Preparing Undergraduate Physics Majors for Careers in Industry

NASA Astrophysics Data System (ADS)

Howes, Ruth

2011-03-01

Seven years ago, the Strategic Programs for Innovations in Undergraduate Physics (SPIN-UP) Report produced by the National Task Force on Undergraduate Physics identified several key characteristics of thriving undergraduate physics departments including steps these departments had taken to prepare students better for careers in industry. Today statistical data from AIP shows that almost 40% of students graduating with a degree in physics seek employment as soon as they graduate. Successful undergraduate physics programs have taken steps to adapt their rigorous physics programs to ensure that graduating seniors have the skills they need to enter the industrial workplace as well as to go on to graduate school in physics. Typical strategies noted during a series of SPIN-UP workshops funded by a grant from NSF to APS, AAPT, and AIP include flexible curricula, early introduction of undergraduates to research techniques, revised laboratory experiences that provide students with skills they need to move directly into jobs, and increased emphasis on ``soft'' skills such as communication and team work. Despite significant success, undergraduate programs face continuing challenges in preparing students to work in industry, most significantly the fact that there is no job called ``physicist'' at the undergraduate level. supported by grant NSF DUE-0741560.

Proceedings of the Twentieth NASA Propagation Experimenters Meeting (NAPEX 20) and the Advanced Communications Technology Satellite (ACTS) Propagation Studies Miniworkshop

NASA Technical Reports Server (NTRS)

Golshan, Nasser (Editor)

1996-01-01

The NASA Propagation Experimenters (NAPEX) Meeting is convened each year to discuss studies supported by the NASA Propagation Program. Representatives from the satellite communications (satcom) industry, academia, and government who have an interest in space-ground radio wave propagation are invited to NAPEX meetings for discussions and exchange of information. The reports delivered at these meetings by program managers and investigators present recent activities and future plans. This forum provides an opportunity for peer discussion of work in progress, timely dissemination of propagation results, and close interaction with the satcom industry.

Philanthropy funding for neurosurgery research and program development.

PubMed

Zusman, Edie E; Heary, Robert F; Stroink, Ann R; Berger, Mitchel S; Popp, A John; Friedlander, Robert M; Martin, Neil A; Lonser, Russell R; Asthagiri, Ashok R

2013-07-01

In times of fiscal and political uncertainty, philanthropy has become an increasingly important mechanism for building, maintaining, and expanding neurosurgical research programs. Although philanthropy has historically helped launch many hospital systems, scientists and clinicians have generally relied on government grants and industry investment to support research and program infrastructure. However, competition for funds from all sources has increased at the same time as the pipelines for those funds have eroded. Philanthropy can provide salary support to allow neurosurgeons to pursue research and, ultimately, advance the field to improve outcomes for patients. Funds raised can fill financial gaps to recruit and pay for needed research staff, equipment, and facilities. To foster charitable giving, institutions can develop both a culture and processes to promote and support philanthropy. Furthermore, it is essential to ensure that donor relationships are properly nurtured with ongoing stewardship. In addition to cultivating grateful patients, there are numerous creative models of fundraising for research that can be explored, including venture philanthropy, in which voluntary health organizations or individuals partner with academia and industry to invest in early-stage drug development and other innovations. Other approaches include formation of nonprofit foundations and partnerships with other entities to work jointly on shared development goals.

A first step toward understanding patient safety

PubMed Central

2016-01-01

Patient safety has become an important policy agenda in healthcare systems since publication of the 1999 report entitled "To Err Is Human." The paradigm has changed from blaming the individual for the error to identifying the weakness in the system that led to the adverse events. Anesthesia is one of the first healthcare specialties to adopt techniques and lessons from the aviation industry. The widespread use of simulation programs and the application of human factors engineering to clinical practice are the influences of the aviation industry. Despite holding relatively advanced medical technology and comparable safety records, the Korean health industry has little understanding of the systems approach to patient safety. Because implementation of the existing system and program requires time, dedication, and financial support, the Korean healthcare industry is in urgent need of developing patient safety policies and putting them into practice to improve patient safety before it is too late. PMID:27703622

City of San Antonio, Texas Better Buildings Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Meyer, Liza C.; Hammer, Mary C.

2014-06-30

The San Antonio Better Buildings Program is a unified single-point-of-service energy efficiency delivery mechanism targeting residential, commercial, institutional, industrial and public buildings. This comprehensive and replicable energy efficiency program is designed to be an effective demand side management initiative to provide a seamless process for program participants to have turn-key access to expert analysis, support and incentives to improve the performance of their in-place energy using systems, while reducing electrical energy use and demand.

State investments in high-technology job growth.

PubMed

Leicht, Kevin T; Jenkins, J Craig

2017-07-01

Since the early 1970's state and local governments have launched an array of economic development programs designed to promote high-technology development. The question our analysis addresses is whether these programs promote long-term high-technology employment growth net of state location and agglomeration advantages. Proponents talk about an infrastructure strategy that promotes investment in public research and specialized infrastructure to attract and grow new high technology industries in specific locations, and a more decentralized entrepreneurial strategy that reinforces local agglomeration capacities by investing in new enterprises and products, promoting the development of local networks and partnerships. Our results support the entrepreneurial strategy, suggesting that state governments can accelerate high technology development by adopting market-supportive programs that complement private sector initiatives. In addition to positive direct benefits of technology deployment/transfer programs and SBIR programs, entrepreneurial programs affect change in high-technology employment in concert with existing locational and agglomeration advantages. Rural (i.e. low population density) states tend to benefit by technology development programs. Infrastructure strategy programs also facilitate high technology job growth in places where local advantages already exist. Our results suggest that critics of industrial policy are correct that high technology growth is organic and endogenous, yet state governments are able to "pick winners and losers" in ways that grow their local economy. Copyright © 2017 Elsevier Inc. All rights reserved.

How to sell safer sex.

PubMed

Overs, C

1991-09-01

Social and economic factors determine the extent of the sex industry in societies. Despite AIDS, the sex industry will continue to thrive. Accordingly, health promotion strategies aimed at sex workers and their clients should not stem from the belief that the industry should cease to exist. This paper offers advice in developing and implementing programs to promote safer sex among sex workers. The social context is 1 element to consider in planning successful campaigns. Interventions must be combined with well-planned prevention campaigns aimed at entire populations. The opinions and participation of those involved in the industry should also be sought, while worker discussion and action upon other community issues should not be discouraged. Care should be given to target the numerous and diverse sex worker audiences in addition to other persons related to and involved in the industry. Programs should address the main obstacles to practicing safer sex, and attention should be given to ensure the provision of an adequate and regular supply of cheap or free condoms through varied distribution channels. In the area of service provision, sex workers need easy access to social support and health care services from which they are often excluded. Activities conducted around the world include the marketing of safer sex, distributing printed information on HIV and AIDS to clients, training sex workers to pass designated constructive ideas to others involved in the sex industry, referring sex workers to sex businesses supportive of safer sex practices, and developing street theater and cabaret shows in bars.

Traditional food: a better compatibility with industry requirements.

PubMed

Cotillon, Christophe; Guyot, Anne-Clothilde; Rossi, Daniel; Notarfonso, Maurizio

2013-11-01

The objective of this article is to summarise the main results of the TRUEFOOD Integrated project, which is supported by the European Commission in the European Framework Program 6 (FP6). This project started in 2006 and ended in 2010. TRUEFOOD aimed to improve quality and safety and introduce innovation into Traditional European Food production systems through research, demonstration, dissemination and training activities. It focuses on increasing value to both consumers and producers and on supporting the development of realistic business plans for all components of the food chain, using a farm-to-fork approach. © 2013 Society of Chemical Industry.

Space technology transfer to developing countries: opportunities and difficulties

NASA Astrophysics Data System (ADS)

Leloglu, U. M.; Kocaoglan, E.

Space technology, with its implications on science, economy and security, is mostly chosen as one of the priority areas for technological development by developing countries. Most nations aspiring to begin playing in the space league prefer technology transfer programs as a first step. Decreasing initial costs by small satellite technology made this affordable for many countries. However, there is a long way from this first step to establishment of a reliable space industry that can both survive in the long term with limited financial support from the government and meet national needs. This is especially difficult when major defense companies of industrialized countries are merging to sustain their competitiveness. The prerequisites for the success are implementation of a well-planned space program and existence of industrialization that can support basic testing and manufacturing activities and supply qualified manpower. In this study, the difficulties to be negotiated and the vicious circles to be broken for latecomers, that is, developing countries that invest on space technologies are discussed. Especially, difficulties in the technology transfer process itself, brain drain from developing countries to industrialized countries, strong competition from big space companies for domestic needs, costs of establishing and maintaining an infrastructure necessary for manufacturing and testing activities, and finally, the impact of export control will be emphasized. We will also try to address how and to what extent collaboration can solve or minimize these problems. In discussing the ideas mentioned above, lessons learned from the BILSAT Project, a technology transfer program from the UK, will be referred.

Food safety regulations in Australia and New Zealand Food Standards.

PubMed

Ghosh, Dilip

2014-08-01

Citizens of Australia and New Zealand recognise that food security is a major global issue. Food security also affects Australia and New Zealand's status as premier food exporting nations and the health and wellbeing of the Australasian population. Australia is uniquely positioned to help build a resilient food value chain and support programs aimed at addressing existing and emerging food security challenges. The Australian food governance system is fragmented and less transparent, being largely in the hands of government and semi-governmental regulatory authorities. The high level of consumer trust in Australian food governance suggests that this may be habitual and taken for granted, arising from a lack of negative experiences of food safety. In New Zealand the Ministry of Primary Industries regulates food safety issues. To improve trade and food safety, New Zealand and Australia work together through Food Standards Australia New Zealand (FSANZ) and other co-operative agreements. Although the potential risks to the food supply are dynamic and constantly changing, the demand, requirement and supply for providing safe food remains firm. The Australasian food industry will need to continually develop its system that supports the food safety program with the help of scientific investigations that underpin the assurance of what is and is not safe. The incorporation of a comprehensive and validated food safety program is one of the total quality management systems that will ensure that all areas of potential problems are being addressed by industry. © 2014 Society of Chemical Industry.

Valuing and Maintaining Independent Research with Private Sector Funding

NASA Astrophysics Data System (ADS)

Prinn, R. G.

2016-12-01

Industries have been funding important research programs in the Geosciences at universities for decades. This support has proven to be beneficial to both universities and the private sector. It is of course important that the independence of the researchers in this relationship is maintained. The relationship usually involves a common interest in understanding and solving a particular problem. Some common keys to maintaining independence have been transparency about the relationship, control of the research agenda by the researchers, and no censorship of publications. In addressing this topic, I will draw upon my experience in two programs that have been funded by industry as well as federal agencies. The 25-year-old Joint Program on the Science and Policy of Global Change uses coupled earth system and economic models to quantify risks of climate change and assess affordable ways to evolve to low to zero emission energy in the future, and is funded by DOE and other federal agencies plus a large consortium of industries (globalchange.mit.edu). And the 38-year-old AGAGE global network that measures, and estimates emissions and lifetimes, of greenhouse and ozone-depleting gases, and is funded by NASA but was also supported in its first 6 years by a consortium of CFC manufacturing companies (agage.mit.edu).

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

The goal of the U.S. Department of Energy Underground Coal Conversion (UCC) program is to develop the technology to produce clean fuels from coal deposits unsuitable for commercial exploitation by conventional mining techniques. The highest priority is to develop and demonstrate, in conjunction with industry, a commercially feasible process for underground gasification of low-rank coal in the 1985--1987 time period. The program will also attempt to develop cost-effective technologies to utilize steeply dipping seams and bituminous coal by UCC. Results of the program to date indicate that, while UCC is technically feasible, it still contains some process unknowns, environmental risks,more » and economic risks that require R and D. In order to contribute to the national energy goals, a strong DOE program which incorporates maximum industry involvement is planned. Major projects are described in some detail. Finally, a strong program of supporting activities will address specific problems identified in the field testing and will seek to advance UCC technology. In summary, the program's strategy is to remove the high-risk elements of UCC by resolving those technical, environmental, and economic uncertainties that remain, and to enable industry to assume responsibility for commercialization of the process.« less

Meeting 2020 Workforce Goals: The Role of Industry-College Collaboration and Goals for Instructional Design

ERIC Educational Resources Information Center

Yarnall, Louise

2014-01-01

Since the 1990s, federal programs for workforce training have aimed to transform the role of community colleges from narrow contract training to a broader role that encompasses strategic instructional program planning and innovation to support lifelong learning for a changing workforce and economic development (Jacobs & Teahen, 1996). Yet, to…

Challenges of Remote Sensing and Spatial Information Education and Technology Transfer in a Fast Developing Industry

NASA Astrophysics Data System (ADS)

Tsai, F.; Chen, L.-C.

2014-04-01

During the past decade, Taiwan has experienced an unusual and fast growing in the industry of mapping, remote sensing, spatial information and related markets. A successful space program and dozens of advanced airborne and ground-based remote sensing instruments as well as mobile mapping systems have been implemented and put into operation to support the vast demands of geospatial data acquisition. Moreover, in addition to the government agencies and research institutes, there are also tens of companies in the private sector providing geo-spatial data and services. However, the fast developing industry is also posing a great challenge to the education sector in Taiwan, especially the higher education for geo-spatial information. Facing this fast developing industry, the demands of skilled professionals and new technologies in order to address diversified needs are indubitably high. Consequently, while delighting in the expanding and prospering benefitted from the fast growing industry, how to fulfill these demands has become a challenge for the remote sensing and spatial information disciplines in the higher education institutes in Taiwan. This paper provides a brief insight into the status of the remote sensing and spatial information industry in Taiwan as well as the challenges of the education and technology transfer to support the increasing demands and to ensure the continuous development of the industry. In addition to the report of the current status of the remote sensing and spatial information related courses and programs in the colleges and universities, current and potential threatening issues and possible resolutions are also discussed in different points of view.

Carolinas Energy Career Center

DOE Office of Scientific and Technical Information (OSTI.GOV)

Classens, Anver; Hooper, Dick; Johnson, Bruce

2013-03-31

Central Piedmont Community College (CPCC), located in Charlotte, North Carolina, established the Carolinas Energy Career Center (Center) - a comprehensive training entity to meet the dynamic needs of the Charlotte region's energy workforce. The Center provides training for high-demand careers in both conventional energy (fossil) and renewable energy (nuclear and solar technologies/energy efficiency). CPCC completed four tasks that will position the Center as a leading resource for energy career training in the Southeast: • Development and Pilot of a New Advanced Welding Curriculum, • Program Enhancement of Non-Destructive Examination (NDE) Technology, • Student Support through implementation of a model targetedmore » toward Energy and STEM Careers to support student learning, • Project Management and Reporting. As a result of DOE funding support, CPCC achieved the following outcomes: • Increased capacity to serve and train students in emerging energy industry careers; • Developed new courses and curricula to support emerging energy industry careers; • Established new training/laboratory resources; • Generated a pool of highly qualified, technically skilled workers to support the growing energy industry sector.« less

A forecast of space technology, 1980 - 2000

NASA Technical Reports Server (NTRS)

1976-01-01

The future of space technology in the United States during the period 1980-2000 was presented, in relation to its overall role within the space program. Conclusions were drawn and certain critical areas were identified. Three different methods to support this work were discussed: (1) by industry, largely without NASA or other government support, (2) partially by industry, but requiring a fraction of NASA or similar government support, (3) currently unique to space requirements and therefore relying almost totally on NASA support. The proposed work was divided into the following areas: (1) management of information (acquisition, transfer, processing, storing) (2) management of energy (earth-to-orbit operations, space power and propulsion), (3) management of matter (animate, inanimate, transfer, storage), (4) basic scientific resources for technological advancement (cryogenics, superconductivity, microstructures, coherent radiation and integrated optics technology).

76 FR 33244 - Manufacturing Council

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-08

... DEPARTMENT OF COMMERCE International Trade Administration Manufacturing Council AGENCY... experience in promoting, developing and marketing programs in support of manufacturing industries, in job... Council meetings and events are responsible for their travel, living and other personal expenses. Meetings...

Perspective from Western Canada and the Canadian meat industry.

PubMed

Classen, H L; Schwean, K V

1998-02-01

The Canadian broiler chicken and turkey industries are distributed approximately according to human population. Individual components of these industries tend to be smaller than their U.S. counterparts and not to be vertically integrated. The outlook of the poultry meat industries is positive because of increasing per capita consumption of chicken and the potential for gains in turkey consumption. The number of permanently employed poultry scientists at publicly funded institutions has declined in Western Canada. University training in Poultry Science is restricted to four major institutions where it has been integrated into Animal Science and Veterinary Medicine programs. For the most part, poultry scientists have developed successful research programs and this research has been enhanced by scientists employed in term positions. Publicly funded poultry extension has declined but this reduction has been compensated to some degree by industry-sponsored programs and the private sector. The majority of research funding, which was once derived from government, is now provided by industry; government contributions are frequently contingent on initial industry support. The consequence of this type of funding arrangement is a trend to more short-term and less long-term research. Canada has no strategic plan regarding poultry training, research, or extension and this needs to be addressed before there is a further reduction in the country's infrastructure. Modern communication technology offers promise to reduce the isolation of scientists in different parts of Canada.

Emissions and new technology programs for conventional spark-ignition aircraft engines

NASA Technical Reports Server (NTRS)

Wintucky, W. T.

1976-01-01

A long-range technology plan in support of general aviation engines was formulated and is being implemented at the Lewis Research Center. The overall program was described, and that part of the program that represents the in-house effort at Lewis was presented in detail. Three areas of government and industry effort involving conventional general-aviation piston engines were part of a coordinated overall plan: (1) FAA/NASA joint program, (2) NASA contract exhaust emissions pollution reduction program, and (3) NASA in-house emissions reduction and new technology program.

Research and Grant Management: The Role of the Project Management Office (PMO) in a European Research Consortium Context

ERIC Educational Resources Information Center

Wedekind, Gerben Kristian; Philbin, Simon Patrick

2018-01-01

This paper illustrates how a university-based project management office (PMO) can provide focused support across the entire grant project lifecycle within a European research context. In recent years, EU (European Union) research and innovation grant programs have increasingly shifted to support multidisciplinary consortia composed of industry,…

MATES in Construction: Impact of a Multimodal, Community-Based Program for Suicide Prevention in the Construction Industry

PubMed Central

Gullestrup, Jorgen; Lequertier, Belinda; Martin, Graham

2011-01-01

A large-scale workplace-based suicide prevention and early intervention program was delivered to over 9,000 construction workers on building sites across Queensland. Intervention components included universal General Awareness Training (GAT; general mental health with a focus on suicide prevention); gatekeeper training provided to construction worker volunteer ‘Connectors’; Suicide First Aid (ASIST) training offered to key workers; outreach support provided by trained and supervised MIC staff; state-wide suicide prevention hotline; case management service; and postvention support provided in the event of a suicide. Findings from over 7,000 workers (April 2008 to November 2010) are reported, indicating strong construction industry support, with 67% building sites and employers approached agreeing to participate in MIC. GAT participants demonstrated significantly increased suicide prevention awareness compared with a comparison group. Connector training participants rated MIC as helpful and effective, felt prepared to intervene with a suicidal person, and knew where to seek help for a suicidal individual following the training. Workers engaged positively with the after-hours crisis support phone line and case management. MIC provided postvention support to 10 non-MIC sites and sites engaged with MIC, but not yet MIC-compliant. Current findings support the potential effectiveness and social validity of MIC for preventing suicide in construction workers. PMID:22163201

Research and technology 1995 annual report

NASA Technical Reports Server (NTRS)

1995-01-01

As the NASA Center responsible for assembly, checkout, servicing, launch, recovery, and operational support of Space Transportation System elements and payloads, the John F. Kennedy Space Center is placing increasing emphasis on its advanced technology development program. This program encompasses the efforts of the Engineering Development Directorate laboratories, most of the KSC operations contractors, academia, and selected commercial industries - all working in a team effort within their own areas of expertise. This edition of the Kennedy Space Center Research and Technology 1995 Annual Report covers efforts of all these contributors to the KSC advanced technology development program, as well as technology transfer activities. Major areas of research include environmental engineering, automation, robotics, advanced software, materials science, life sciences, mechanical engineering, nondestructive evaluation, and industrial engineering.

NASA's Discovery Program

NASA Astrophysics Data System (ADS)

Kicza, Mary; Bruegge, Richard Vorder

1995-01-01

NASA's Discovery Program represents an new era in planetary exploration. Discovery's primary goal: to maintain U.S. scientific leadership in planetary research by conducting a series of highly focused, cost effective missions to answer critical questions in solar system science. The Program will stimulate the development of innovative management approaches by encouraging new teaming arrangements among industry, universities and the government. The program encourages the prudent use of new technologies to enable/enhance science return and to reduce life cycle cost, and it supports the transfer of these technologies to the private sector for secondary applications. The Near-Earth Asteroid Rendezvous and Mars Pathfinder missions have been selected as the first two Discovery missions. Both will be launched in 1996. Subsequent, competitively selected missions will be conceived and proposed to NASA by teams of scientists and engineers from industry, academia, and government organizations. This paper summarizes the status of Discovery Program planning.

CEM data quality: Survey of the utility industry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mitnick, S.A.; Wade, S.

1995-09-01

The Acid Rain Allowance Trading program of the Clean Air Act Amendments of 1990 (CAAA) represents a spectacular departure from traditional Command-and-Control regulation. The program is noteworthy both in its scale and because, defacto, it turns the pollutant Sulfur Dioxide (SO{sub 2}) into a valuable asset. The market has responded accordingly with the development of an infrastructure to support the financial aspects of the program; it includes the Electronic Emission Tracking System, the Chicago Board of Trade`s SO{sub 2} Allowance Futures Market and, more recently, Cantor Fitzgerald`s Market Price Index (MPI). While this may increase the potential for successful implementationmore » of the allowance market, one should not lose sight of the fact that these institutional supports are the trappings of an emission reduction program, not the substance. The allowance trading program will not work unless it meets its environmental goals. Continuous Emission Monitoring (CEM) requirements in the CAAA address this concern by providing the infrastructure to support the environmental aspects of the allowance trading program. CEM systems are relied upon to provide accurate, quality-assured emissions data. This information is critical to the success of the allowance trading program in the eyes of both the general public and the financial/utility community. December 31, 1994 marked the close of the fifth CEM reporting quarter since the program was initiated in November 1993. Since that time, the electric utility industry has submitted over 1,000 quarterly reports, known as electronic data reports (EDRs), to EPA. Hagler Bailly evaluated the quality of data contained in these EDRs using Superbase, software it developed to perform this task. This paper presents selected findings from that review.« less

A Program for Cultivating Nuclear Talent at Engineering Educational Institute in a Remote Area from Nuclear Power Plants

NASA Astrophysics Data System (ADS)

Takahashi, Tsuyoshi

Recently, in Japan, the number of students who hope for finding employment at the nuclear power company has decreased as students‧ concern for the nuclear power industry decreases. To improve the situation, Ministry of Education, Culture, Sports, Science and Technology launched the program of cultivating talent for nuclear power which supports research and education of nuclear power in the academic year of 2007. Supported by the program, Kushiro College of Technology conducted several activities concerning nuclear power for about a year. The students came to be interested in nuclear engineering through these activities and its results.

Preparing displaced adults for the optics/photonics workforce

NASA Astrophysics Data System (ADS)

Hull, Darrell M.

2000-06-01

As the optics/photonics industry continues to grow, the demand for workers is assumed to increase proportionally. Empirical data seem to support this assumption. This increase presents a challenge to optics/photonics education, since they control and assume responsibility for a key factor in the ability of industry to further expand. At the same time, the U.S. government through the Department of Labor and the Workforce Investment Act has requested that communities enact programs for displaced adults to transition to the workplace. A program of study is provided that would assist adults in making this transition from unemployment to the optics/photonics industry, with the necessary general work skills, occupational optics/photonics skills, and ability to progress on the job with academic foundations in math and science.

Development of the COMmerical Experiment Transporter (COMET)

NASA Technical Reports Server (NTRS)

Pawlick, Joseph F., Jr.

1990-01-01

In order to commercialize space, this nation must develop a well defined path through which the Centers for the Commercial Development of Space (CCDS's) and their industrial partners and counterparts can exploit the advantages of space manufacturing and processing. Such a capability requires systems, a supporting infrastructure, and funding to become a viable component of this nation's economic strength. This paper follows the development of the COMmercial Experiment Program (COMET) from inception to its current position as the country's first space program dedicated to satisfying the needs of industry: an industry which must investigate the feasibility of space based processes, materials, and prototypes. With proposals now being evaluated, much of the COMET story is yet to be written, however concepts and events which led to it's current status and the plans for implementation may be presented.

Current and Future Developments in Air Traffic Control

NASA Technical Reports Server (NTRS)

Jackson, Joseph; Green, Steven M.

1999-01-01

Current and future energy demands, end uses, and cost used to characterize typical applications services in the industrial sector of the United States are examined. A review and evaluation of existing industrial energy data bases was undertaken to assess their potential for supporting SERI research market suitability analysis; (2) market development; (3) end use matching; (4) industrial application studies; and (5) identification of cost and performance goals for solar systems and typical information requirements for industrial energy end use. The focus was on fuels and electric energy used for heat and power purchased by the manufacturing subsector and listed by 2, 3, and 4 digit SIC, primary fuel. The effects of federal and state industrial energy conservation programs on future industrial sector demands were assessed.

Partnering to Change the Way NASA and the Nation Communicate Through Space

NASA Technical Reports Server (NTRS)

Vrotsos, Pete A.; Budinger, James M.; Bhasin, Kul; Ponchak, Denise S.

2000-01-01

For at least 20 years, the Space Communications Program at NASA Glenn Research Center (GRC) has focused on enhancing the capability and competitiveness of the U.S. commercial communications satellite industry. GRC has partnered with the industry on the development of enabling technologies to help maintain U.S. preeminence in the worldwide communications satellite marketplace. The Advanced Communications Technology Satellite (ACTS) has been the most significant space communications technology endeavor ever performed at GRC, and the centerpiece of GRC's communication technology program for the last decade. Under new sponsorship from NASA's Human Exploration and Development of Space Enterprise, GRC has transitioned the focus and direction of its program, from commercial relevance to NASA mission relevance. Instead of one major experimental spacecraft and one headquarters sponsor, GRC is now exploring opportunities for all of NASA's Enterprises to benefit from advances in space communications technologies, and accomplish their missions through the use of existing and emerging commercially provided services. A growing vision within NASA is to leverage the best commercial standards, technologies, and services as a starting point to satisfy NASA's unique needs. GRC's heritage of industry partnerships is closely aligned with this vision. NASA intends to leverage the explosive growth of the telecommunications industry through its impressive technology advancements and potential new commercial satellite systems. GRC's partnerships with the industry, academia, and other government agencies will directly support all four NASA's future mission needs, while advancing the state of the art of commercial practice. GRC now conducts applied research and develops and demonstrates advanced communications and network technologies in support of all four NASA Enterprises (Human Exploration and Development of Space, Space Science, Earth Science, and Aero-Space Technologies).

Effects of health and safety problem recognition on small business facility investment

PubMed Central

2013-01-01

Objectives This study involved a survey of the facility investment experiences, which was designed to recognize the importance of health and safety problems, and industrial accident prevention. Ultimately, we hope that small scale industries will create effective industrial accident prevention programs and facility investments. Methods An individual survey of businesses’ present physical conditions, recognition of the importance of the health and safety problems, and facility investment experiences for preventing industrial accidents was conducted. The survey involved 1,145 business operators or management workers in small business places with fewer than 50 workers in six industrial complexes. Results Regarding the importance of occupational health and safety problems (OHS), 54.1% said it was “very important”. Received technical and financial support, and industrial accidents that occurred during the past three years were recognized as highly important for OHS. In an investigation regarding facility investment experiences for industrial accident prevention, the largest factors were business size, greater numbers of industrial accidents, greater technical and financial support received, and greater recognition of the importance of the OHS. The related variables that decided facility investment for industry accident prevention in a logistic regression analysis were the experiences of business facilities where industrial accidents occurred during the past three years, received technical and financial support, and recognition of the OHS. Those considered very important were shown to be highly significant. Conclusions Recognition of health and safety issues was higher when small businesses had experienced industrial accidents or received financial support. The investment in industrial accidents was greater when health and safety issues were recognized as important. Therefore, the goal of small business health and safety projects is to prioritize health and safety issues in terms of business management and recognition of importance. Therefore, currently various support projects are being conducted. However, there are issues regarding the limitations of the target businesses and inadequacies in maintenance and follow-up. Overall, it is necessary to provide various incentives for onsite participation that can lead to increased recognition of health and safety issues and practical investments, while perfecting maintenance and follow up measures by thoroughly revising existing operating systems. PMID:24472180

Effects of health and safety problem recognition on small business facility investment.

PubMed

Park, Jisu; Jeong, Harin; Hong, Sujin; Park, Jong-Tae; Kim, Dae-Sung; Kim, Jongseo; Kim, Hae-Joon

2013-10-23

This study involved a survey of the facility investment experiences, which was designed to recognize the importance of health and safety problems, and industrial accident prevention. Ultimately, we hope that small scale industries will create effective industrial accident prevention programs and facility investments. An individual survey of businesses' present physical conditions, recognition of the importance of the health and safety problems, and facility investment experiences for preventing industrial accidents was conducted. The survey involved 1,145 business operators or management workers in small business places with fewer than 50 workers in six industrial complexes. Regarding the importance of occupational health and safety problems (OHS), 54.1% said it was "very important". Received technical and financial support, and industrial accidents that occurred during the past three years were recognized as highly important for OHS. In an investigation regarding facility investment experiences for industrial accident prevention, the largest factors were business size, greater numbers of industrial accidents, greater technical and financial support received, and greater recognition of the importance of the OHS. The related variables that decided facility investment for industry accident prevention in a logistic regression analysis were the experiences of business facilities where industrial accidents occurred during the past three years, received technical and financial support, and recognition of the OHS. Those considered very important were shown to be highly significant. Recognition of health and safety issues was higher when small businesses had experienced industrial accidents or received financial support. The investment in industrial accidents was greater when health and safety issues were recognized as important. Therefore, the goal of small business health and safety projects is to prioritize health and safety issues in terms of business management and recognition of importance. Therefore, currently various support projects are being conducted. However, there are issues regarding the limitations of the target businesses and inadequacies in maintenance and follow-up. Overall, it is necessary to provide various incentives for onsite participation that can lead to increased recognition of health and safety issues and practical investments, while perfecting maintenance and follow up measures by thoroughly revising existing operating systems.

A Tool for Rating the Resilience of Critical Infrastructures in Extreme Fires

DTIC Science & Technology

2014-05-01

provide a tool for NRC to help the Canadian industry to develop extreme fire protection materials and technologies for critical infrastructures. Future...supported by the Canadian Safety and Security Program (CSSP) which is led by Defence Research and Development Canada’s Centre for Security Science, in...in oil refinery and chemical industry facilities. The only available standard in North America that addresses the transportation infrastructure is

World Support Base: Spain

DTIC Science & Technology

1987-09-01

Comments Recommendations Company Reports Def ex AFARMADE (Spanish Association of Arms and Defense Material Makers) CASA ( Construcciones Aeronauticas...of tine avionics and structurai parts for the aircraft. Also, the construction of a factory to bui Id jet engines and a I icense for the... construction of GE’s F404 engine for the F-18 has further enhanced Spain’s defense Industry. The goal of the Spanish defense industrial program Is to reduce

Make or Buy: A Systematic Approach to Department of Defense Sourcing Decisions

DTIC Science & Technology

2013-07-30

Defense-Industrial Initiatives Group at CSIS, where he worked on projects related to U.S. and European technology and industrial bases supporting defense...Prior to joining CSIS, Mr. Ben-Ari was a research associate at George Washington University’s Center for International Science and Technology ...collaborative research and development programs for Gilat Satellite Networks Ltd., an Israeli high- technology company in the field of satellite

Mechanics of Textile Composites Conference

NASA Technical Reports Server (NTRS)

Poe, Clarence C. (Editor); Harris, Charles E. (Editor)

1995-01-01

This document is a compilation of papers presented at the Mechanics of Textile Composites Conference in Hampton, Virginia, December 6-8, 1994. This conference was the culmination of a 3-year program that was initiated by NASA late in 1990 to develop mechanics of textile composites in support of the NASA Advance Composites Technology Program (ACT). The goal of the program was to develop mathematical models of textile preform materials and test methods to facilitate structural analysis and design. Participants in the program were from NASA, academia, and industry.

NASA wiring for space applications program

NASA Technical Reports Server (NTRS)

Schulze, Norman

1995-01-01

An overview of the NASA Wiring for Space Applications Program and its relationship to NASA's space technology enterprise is given in viewgraph format. The mission of the space technology enterprise is to pioneer, with industry, the development and use of space technology to secure national economic competitiveness, promote industrial growth, and to support space missions. The objectives of the NASA Wiring for Space Applications Program is to improve the safety, performance, and reliability of wiring systems for space applications and to develop improved wiring technologies for NASA flight programs and commercial applications. Wiring system failures in space and commercial applications have shown the need for arc track resistant wiring constructions. A matrix of tests performed versus wiring constructions is presented. Preliminary data indicate the performance of the Tensolite and Filotex hybrid constructions are the best of the various candidates.

Hydropower Projects

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2015-04-02

The Water Power Program helps industry harness this renewable, emissions-free resource to generate environmentally sustainable and cost-effective electricity. Through support for public, private, and nonprofit efforts, the Water Power Program promotes the development, demonstration, and deployment of advanced hydropower devices and pumped storage hydropower applications. These technologies help capture energy stored by diversionary structures, increase the efficiency of hydroelectric generation, and use excess grid energy to replenish storage reserves for use during periods of peak electricity demand. In addition, the Water Power Program works to assess the potential extractable energy from domestic water resources to assist industry and government inmore » planning for our nation’s energy future. From FY 2008 to FY 2014, DOE’s Water Power Program announced awards totaling approximately $62.5 million to 33 projects focused on hydropower. Table 1 provides a brief description of these projects.« less

Life Support Technology Challenges for NASA's Constellation Program

NASA Technical Reports Server (NTRS)

Carrasquillo, Robyn; Bagdigian, Robert; Ewert, Michael

2007-01-01

The presentation is for the ECLSS session of the Constellation Technology Exchange Conference and is to describe what new technology challenges the Constellation mission presents for the ECLSS, in order to communicate these needs with industry.

Development of Educational Support System for Algorithm using Flowchart

NASA Astrophysics Data System (ADS)

Ohchi, Masashi; Aoki, Noriyuki; Furukawa, Tatsuya; Takayama, Kanta

Recently, an information technology is indispensable for the business and industrial developments. However, it has been a social problem that the number of software developers has been insufficient. To solve the problem, it is necessary to develop and implement the environment for learning the algorithm and programming language. In the paper, we will describe the algorithm study support system for a programmer using the flowchart. Since the proposed system uses Graphical User Interface(GUI), it will become easy for a programmer to understand the algorithm in programs.

Ground support system methodology and architecture

NASA Technical Reports Server (NTRS)

Schoen, P. D.

1991-01-01

A synergistic approach to systems test and support is explored. A building block architecture provides transportability of data, procedures, and knowledge. The synergistic approach also lowers cost and risk for life cycle of a program. The determination of design errors at the earliest phase reduces cost of vehicle ownership. Distributed scaleable architecture is based on industry standards maximizing transparency and maintainability. Autonomous control structure provides for distributed and segmented systems. Control of interfaces maximizes compatibility and reuse, reducing long term program cost. Intelligent data management architecture also reduces analysis time and cost (automation).

Corporate social responsibility to improve access to medicines: the case of Brazil.

PubMed

Thorsteinsdóttir, Halla; Ovtcharenko, Natasha; Kohler, Jillian Clare

2017-02-21

Access to medicines and the development of a strong national pharmaceutical industry are two longstanding pillars of health policy in Brazil. This is reflected in a clear emphasis by Brazil's Federal Government on improving access to medicine in national health plans and industrial policies aimed at promoting domestic pharmaceutical development. This research proposes that such policies may act as incentives for companies to pursue a strategic Corporate Social Responsibility (CSR) agenda. CSR that supports Governmental priorities could help companies to benefit significantly from the Governmental industrial policy. We sought to determine whether CSR activities of Brazilian pharmaceutical firms are currently aligned with the Federal Government's health prioritization. To do so we examined key Brazilian health related policies since 2004, including the specific priorities of Brazil's 2012-2015 Health Plan, and compared these with CSR initiatives that are reported on the websites of select pharmaceutical firms in Brazil. Brazil's national health plans and industrial policies demonstrated that the Federal Government has followed diverse approaches for improving access to medicines, including strengthening health care infrastructure, increasing transparency, and supporting product development partnerships. Case studies of six pharmaceutical firms, representing both public and private companies of varying size, support the perspective that CSR is a priority for firms. However, while many programs target issues such as health infrastructure, health care training, and drug donation, more programs focus on areas other than health and do not seem to be connected to Governmental prioritization. This research suggests that there are loose connections between Governmental priorities and pharmaceutical firm CSR. However, there remains a significant opportunity for greater alignment, which could improve access to medicines in the country and foster a stronger relationship between the Government and industry.

The NASA aircraft icing research program

NASA Technical Reports Server (NTRS)

Shaw, Robert J.; Reinmann, John J.

1990-01-01

The objective of the NASA aircraft icing research program is to develop and make available to industry icing technology to support the needs and requirements for all-weather aircraft designs. Research is being done for both fixed wing and rotary wing applications. The NASA program emphasizes technology development in two areas, advanced ice protection concepts and icing simulation. Reviewed here are the computer code development/validation, icing wind tunnel testing, and icing flight testing efforts.

SPARTNIK: Engineering catalyst for government and industry

NASA Technical Reports Server (NTRS)

Prass, James D.; Romano, Thomas C.; Hunter, Jeanine M.

1995-01-01

Industrial demands for highly motivated and competent technical personnel to carry forward with the technological goals of the US has posed a significant challenge to graduating engineers. While curricula has improved and diversified over time to meet these industry demands, relevant industry experience is not always available to undergraduates. The microsatellite development program at San Jose State University (SJSU) has allowed an entire undergraduate senior class to utilize a broad range of training and education to refine their engineering skills, bringing them closer to becoming engineering professionals. Close interaction with industry mentors and manufacturers on a real world project provides a significant advantage to educators and students alike. With support from companies and government agencies, the students have designed and manufactured a microsatellite, designed to be launched into a low Earth orbit. This satellite will gather telemetry for characterizing the state of the spacecraft. This will enable the students to have a physical check on their predicted value of spacecraft subsystem performance. Additional experiments will also be undertaken during the two year lifetime, including micro-meteorite impact sensing and capturing digital color images of the Earth. This paper will detail the process whereby students designed, prototype and manufactured a small satellite in a large team environment, along with the experiments that will be performed on board. With the project's limited funds, it needed the support of many industry companies to help with technical issues and hardware acquisition. Among the many supporting companies, NASA's space shuttle small payloads program could be used for an affordable launch vehicle for the student project. The paper address these collaborations between the student project and industry support, as well as explaining the benefits to both. The paper draws conclusion on how these types of student projects can be used by industry as a feasible resource for developing small platforms for space based experiments, as well as increasing the practical experience and engineering knowledge of graduating students. These benefits to industry and universities, can lead to a close working relationship between the two. These types of projects can facilitate the development of low-cost space rated parts to be used by the industry and university projects. It can also help with the understanding and use of acceptable risk non-space rated parts reducing the cost of the spacecraft. This will lead to the development of low cost platforms for space based experiments, providing research companies an inexpensive, long duration platform to conduct their in-space experiments, while better preparing engineering undergraduates for their transition into the work force.

SPARTNIK: Engineering catalyst for government and industry

NASA Astrophysics Data System (ADS)

Prass, James D.; Romano, Thomas C.; Hunter, Jeanine M.

1995-09-01

Industrial demands for highly motivated and competent technical personnel to carry forward with the technological goals of the US has posed a significant challenge to graduating engineers. While curricula has improved and diversified over time to meet these industry demands, relevant industry experience is not always available to undergraduates. The microsatellite development program at San Jose State University (SJSU) has allowed an entire undergraduate senior class to utilize a broad range of training and education to refine their engineering skills, bringing them closer to becoming engineering professionals. Close interaction with industry mentors and manufacturers on a real world project provides a significant advantage to educators and students alike. With support from companies and government agencies, the students have designed and manufactured a microsatellite, designed to be launched into a low Earth orbit. This satellite will gather telemetry for characterizing the state of the spacecraft. This will enable the students to have a physical check on their predicted value of spacecraft subsystem performance. Additional experiments will also be undertaken during the two year lifetime, including micro-meteorite impact sensing and capturing digital color images of the Earth. This paper will detail the process whereby students designed, prototype and manufactured a small satellite in a large team environment, along with the experiments that will be performed on board. With the project's limited funds, it needed the support of many industry companies to help with technical issues and hardware acquisition. Among the many supporting companies, NASA's space shuttle small payloads program could be used for an affordable launch vehicle for the student project. The paper address these collaborations between the student project and industry support, as well as explaining the benefits to both. The paper draws conclusion on how these types of student projects can be used by industry as a feasible resource for developing small platforms for space based experiments, as well as increasing the practical experience and engineering knowledge of graduating students. These benefits to industry and universities, can lead to a close working relationship between the two. These types of projects can facilitate the development of low-cost space rated parts to be used by the industry and university projects. It can also help with the understanding and use of acceptable risk non-space rated parts reducing the cost of the spacecraft. This will lead to the development of low cost platforms for space based experiments, providing research companies an inexpensive, long duration platform to conduct their in-space experiments, while better preparing engineering undergraduates for their transition into the work force.

Research and Technology 2003

NASA Technical Reports Server (NTRS)

2004-01-01

The NASA Glenn Research Center at Lewis Field, in partnership with U.S. industries, universities, and other Government institutions, is responsible for developing critical technologies that address national priorities in aeropropulsion and space applications. Our work is focused on research for new aeropropulsion technologies, aerospace power, microgravity science (fluids and combustion), electric propulsion, and communications technologies for aeronautics, space, and aerospace applications. As NASA s premier center for aeropropulsion, aerospace power, and turbomachinery, our role is to conduct world-class research and to develop key technologies. We contribute to economic growth and national security through safe, superior, and environmentally compatible U.S. civil and military aircraft propulsion systems. Our Aerospace Power Program supports all NASA Enterprises and major programs, including the International Space Station, Advanced Space Transportation, and new initiatives in human and robotic exploration. Glenn Research Center leads NASA s research in the microgravity science disciplines of fluid physics, combustion science, and acceleration measurement. Almost every space shuttle science mission has had an experiment managed by NASA Glenn, and we have conducted a wide array of similar experiments on the International Space Station. The Glenn staff consists of over 3200 civil service employees and support service contractor personnel. Scientists and engineers comprise more than half of our workforce, with technical specialists, skilled workers, and an administrative staff supporting them. We aggressively strive for technical excellence through continuing education, increased diversity in our workforce, and continuous improvement in our management and business practices so that we can expand the boundaries of aeronautics, space, and aerospace technology. Glenn Research Center is a unique facility located in northeast Ohio. Situated on 350 acres of land adjacent to the Cleveland Hopkins International Airport, Glenn comprises more than 140 buildings, including 24 major facilities and over 500 specialized research and test facilities. Additional facilities are located at Plum Brook Station, which is about 50 miles west of Cleveland. Plum Brook Station has four large, major, world-class facilities for space research available for Government and industry programs. Knowledge is the end product of our activities. The R&T reports help make this knowledge fully available to potential users the aircraft engine industry, the space industry, the energy industry, the automotive industry, the aerospace industry, and others. It is organized so that a broad cross section of the community can readily use it. Each article begins with a short introductory paragraph that should prove valuable for the layperson. These articles summarize the progress made during the year in various technical areas and portray the technical and administrative support associated with Glenn s technology programs. We hope that this information is useful to all. If additional information is desired, readers are encouraged to contact the researchers identified at the end of each article and to visit Glenn on the World Wide Web at http://www.grc.nasa.gov.

Unhealthy partnerships: the tobacco industry and African American and Latino labor organizations.

PubMed

Raebeck, Annaebel; Campbell, Richard; Balbach, Edith

2010-04-01

The tobacco industry in the 1980s began to form relationships with outside groups for assistance on key policy issues due to its own poor credibility in the policy arena. This strategy allowed the industry to advance its own interests while seeming to match the agendas of very different organizations. Between 1988 and 1998, the tobacco industry developed coalitions with the A. Philip Randolph Institute (APRI), representing African American trade unionists, and the Labor Coalition on Latin American Advancement (LCLAA), representing Latino trade unionists. APRI and LCLAA each adopted resolutions supporting industry positions on smokefree worksites and excise taxes, issues on which they had not previously taken positions, and promoted these positions to their members, political leaders and the public. They also supported the industry's youth programs. This research relied upon a review of background literature and document searches through the Legacy Tobacco Documents Library and Tobacco Documents Online to examine the development of the excise tax coalition. The tobacco industry built support with APRI and LCLAA by framing policy positions in line with the organizations' interests, creating institutional arrangements that circumvented direct funding from the industry, and enhancing the industry's ability to influence excise tax debates indirectly. Although tobacco control advocates do not have the financial resources of the tobacco industry at their disposal, they can learn from tobacco industry techniques as they seek to build coalitions with people of color in the labor movement. Tobacco control advocates can both counter tobacco industry issue frames and also align their interests with those of working people of color by working on other issues of interest to this population, including health care and worker health and safety.

Alaska's lumber-drying industry—impacts from a federal grant program.

Treesearch

David L. Nicholls; Allen M. Brackley; Thomas D. Rojas

2006-01-01

A survey determined that installed dry kiln capacity in Alaska more than doubled to an estimated 220 thousand board feet (mbf) within 4 years (2000-2004). This increased ability to produce dry lumber and value-added products resulted from industry efforts to obtain federal funding to support a dry kiln grant program. This report reviews grantees' progress in...

Energy Engineering Analysis Program, limited energy study of steam distribution systems, Hawthorne Army Ammunition Depot, Hawthorne, Nevada. Programming documents

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1995-09-01

The project is a significant part of Hawthorne Army Ammunition Depot`s effort to achieve a 20-percent reduction in energy consumption by FY2000 versus FY1985 baseline levels. The project will also assure that heating services are provided to Industrial Area facilities on a continuing basis, supporting mission requirements.

Commerce Lab: Mission analysis payload integration study. Appendix A: Data bases

NASA Technical Reports Server (NTRS)

1985-01-01

The development of Commerce Lab is detailed. Its objectives are to support the space program in these areas: (1) the expedition of space commercialization; (2) the advancement of microgravity science and applications; and (3) as a precursor to future missions in the space program. Ways and means of involving private industry and academia in this commercialization is outlined.

Parabolic Dish Solar Thermal Power Annual Program Review Proceedings

NASA Technical Reports Server (NTRS)

Lucas, J. W.

1982-01-01

The results of activities of the parabolic dish technology and applications development element of DOE's Solar Thermal Energy System Program are presented. Topics include the development and testing of concentrators, receivers, and power conversion units; system design and development for engineering experiments; economic analysis and marketing assessment; and advanced development activities. A panel discussion concerning industrial support sector requirements is also documented.

National Workplace Literacy Program. Garment-Related Bilingual (English and Chinese) Broadcast Lessons. Book 1 and 2.

ERIC Educational Resources Information Center

Chan, Ha Yin

A compilation of transcripts of 100 bilingual English/Chinese broadcast lessons for workers in the garment industry is presented. The lessons are part of the New York Chinatown Manpower Project's Workplace Literacy Program. With the support of the Sino Radio Broadcast Corporation, the lessons are broadcast daily in the morning and again after the…

Preserving the nuclear option: The AIAA position paper on space nuclear power

DOE Office of Scientific and Technical Information (OSTI.GOV)

Allen, D.M.; Bennett, G.L.; El-Genk, M.S.

1996-03-01

In response to published reports about the decline in funding for space nuclear power, the Board of Directors of the American Institute of Aeronautics and Astronautics (AIAA) approved a position paper in March 1995 that recommends (1) development and support of an integrated space nuclear power program by DOE, NASA and DoD; (2) Congressional support for the program; (3) advocacy of the program by government and industry leaders; and (4) continuation of cooperation between the U.S. and other countries to advance nuclear power source technology and to promote safety. This position paper has been distributed to various people having oversightmore » of the U.S. space nuclear power program. {copyright} {ital 1996 American Institute of Physics.}« less

Proceedings of the Twenty-First NASA Propagation Experimenters Meeting (NAPEX XXI) and the Advanced Communications Technology Satellite (ACTS) Propagation Studies Miniworkshop

NASA Technical Reports Server (NTRS)

Golshan, Nasser (Editor)

1997-01-01

The NASA Propagation Experimenters (NAPEX) meeting is convened each year to discuss studies supported by the NASA Propagation Program. Representatives from the satellite communications industry, academia and government who have an interest in space-ground radio wave propagation are invited to NAPEX meetings for discussions and exchange of information. The reports delivered at this meeting by program managers and investigators present recent activities and future plans. This forum provides an opportunity for peer discussion of work in progress, timely dissemination of propagation results, and close interaction with the satellite communications industry.

OAST space technology accomplishments FY 1991

NASA Technical Reports Server (NTRS)

1992-01-01

The program consists of a continuum of space research and technology activities ranging from initial research to the full scale test of prototype equipment in space. Activities include work that is performed by in-house staff at the NASA Centers, university researchers supported by NASA funded grants and contracts, and industrial aerospace organizations under contract to NASA. These diverse activities provide advances in technology breakthroughs that may revolutionalize a technical discipline or mission concept. The work is managed and coordinated by OAST through a process that integrates the best available talent and capability in NASA, industry, and universities into a National civil space research and technology program.

GateWay Community College Water Resources Program Partnerships: An Opportunity for Program Success and Collaboration

NASA Astrophysics Data System (ADS)

Castaneda, M.

2012-12-01

GateWay Community College Water Resources Technologies (WRT) Program offers Certificate of Completions and Associate Degrees on Hydrologic Studies, Water Treatment and Wastewater Treatment. The program has been in existence since 1998 and has gone through several updates to meet the demand for professionals in those areas. The program includes theoretical and practical hands-on training in the monitoring of water quality and quantity as well as in water and industrial wastewater treatment. The WRT program offers online, face-to-face, and hybrid courses to address different student's needs for training. The program only Full-time faculty is supported by 15 adjunct- faculty professionals. Adjunct faculty is usually hired from a wide variety of professional people already working in the industry that have shown interest on teaching. Adjunct faculty also provide free tutoring to the WRT students when they are not teaching courses. The college Learning Center provides funding to support these tutoring activities. The program has an active Advisory Committee that provides guidance and recommends program changes to meet their training needs. This Advisory Committee is made of professionals from different federal, state, county agencies, and municipalities, private industry and consulting companies in the area. The Advisory Committee meets every year to provide feedback to GateWay on curriculum changes and commit to potential internship opportunities for the WRT students. Those internships (or voluntary work) are paid directly by the municipalities or agencies or can be paid by the GateWay WRT program. These internship jobs provides with an opportunity to actively promote the WRT program throughout the valley. The GateWay WRT program considers the Advisory Committee an essential component for the program success: the committee supports the program in recommending and acquiring the latest field equipment needed for the hands-on training. One of the main WRT program objective is to utilize the latest field equipment that will be used by the students when they incorporate into the job market place. The GateWay WRT program is always looking for articulation opportunities with four-year universities. Although not all WRT students are interested in pursuing a four-year degree as part of their professional development, some students welcome this opportunity. GateWay WRT program is finalizing articulation agreements with the University of Arizona's Hydrology and Water Resources Program as well as with the Arizona State University Environmental Management program. Also, the WRT program is trying to internationalize its curriculum by establishing contacts with similar programs in other countries. The University of Guanajuato from Mexico has shown interest in exchanging not only students but also faculty through this process. The WRT program puts emphasis in service learning activities by collaborating and helping community groups such the Lindon Park Neighborhood Association and The Environmental Community Outreach Association. Both groups are in charge of disseminating environmental information to the community regarding superfund site issues. The WRT program has supported several paid internships to increase the community awareness on these technical issues.

Advanced Materials in Support of EERE Needs to Advance Clean Energy Technologies Program Implementation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liby, Alan L; Rogers, Hiram

The goal of this activity was to carry out program implementation and technical projects in support of the ARRA-funded Advanced Materials in Support of EERE Needs to Advance Clean Energy Technologies Program of the DOE Advanced Manufacturing Office (AMO) (formerly the Industrial Technologies Program (ITP)). The work was organized into eight projects in four materials areas: strategic materials, structural materials, energy storage and production materials, and advanced/field/transient processing. Strategic materials included work on titanium, magnesium and carbon fiber. Structural materials included work on alumina forming austentic (AFA) and CF8C-Plus steels. The advanced batteries and production materials projects included work onmore » advanced batteries and photovoltaic devices. Advanced/field/transient processing included work on magnetic field processing. Details of the work in the eight projects are available in the project final reports which have been previously submitted.« less

The AGTSR consortium: An update

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fant, D.B.; Golan, L.P.

1995-10-01

The Advanced Gas Turbine Systems Research (AGTSR) program is a collaborative University-Industry R&D Consortium that is managed and administered by the South Carolina Energy R&D Center. AGTSR is a nationwide consortium dedicated to advancing land-based gas turbine systems for improving future power generation capability. It directly supports the technology-research arm of the ATS program and targets industry-defined research needs in the areas of combustion, heat transfer, materials, aerodynamics, controls, alternative fuels, and advanced cycles. The consortium is organized to enhance U.S. competitiveness through close collaboration with universities, government, and industry at the R&D level. AGTSR is just finishing its thirdmore » year of operation and is sponsored by the U.S. DOE - Morgantown Energy Technology Center. The program is scheduled to continue past the year 2000. At present, there are 78 performing member universities representing 36 states, and six cost-sharing U.S. gas turbine corporations. Three RFP`s have been announced and the fourth RFP is expected to be released in December, 1995. There are 31 research subcontracts underway at performing member universities. AGTSR has also organized three workshops, two in combustion and one in heat transfer. A materials workshop is in planning and is scheduled for February, 1996. An industrial internship program was initiated this past summer, with one intern positioned at each of the sponsoring companies. The AGTSR consortium nurtures close industry-university-government collaboration to enhance synergism and the transition of research results, accelerate and promote evolutionary-revolutionary R&D, and strives to keep a prominent U.S. industry strong and on top well into the 21st century. This paper will present the objectives and benefits of the AGTSR program, progress achieved to date, and future planned activity in fiscal year 1996.« less

Infrastructure support for a waste management institute. Final project report, September 12, 1994--September 11, 1997

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1997-11-01

North Carolina A and T State University has completed the development of an infrastructure for the interdisciplinary Waste Management Institute (WMI). The Interdisciplinary Waste Management Institute (WMI) was approved in June, 1994 by the General Administration of the University of North Carolina as an academic support unit with research and public service functions. The mission of the WMI is to enhance awareness and understanding of waste management issues and to provide instructional support including research and outreach. The goals of WMI are as follows: increase the number of minority professionals who will work in waste management fields; develop cooperative andmore » exchange programs involving faculty, students, government, and industry; serve as institutional sponsor of public awareness workshops and lecture series; and support interdisciplinary research programs. The vision of the WMI is to provide continued state-of-the art environmental educational programs, research, and outreach.« less

Best practices and strategies for improving rail energy efficiency

DOT National Transportation Integrated Search

2014-01-28

In support of the FRA Energy, Environment, and Engine (E3) program, this study reviews and evaluates technology development opportunities, equipment upgrades, and best practices (BPs) of international and U.S. passenger and freight rail industry segm...

Fossil Energy Program Annual Progress Report for the Period April 1, 2000 through March 31, 2001

DOE Office of Scientific and Technical Information (OSTI.GOV)

Judkins, RR

This report covers progress made at Oak Ridge National Laboratory (ORNL) on research and development projects that contribute to the advancement of fossil energy technologies. Projects on the ORNL Fossil Energy Program are supported by the U.S. Department of Energy (DOE) Office of Fossil Energy, the DOE National Energy Technology Laboratory (NETL), the DOE Fossil Energy Clean Coal Technology (CCT) Program, the DOE National Petroleum Technology Office, and the DOE Fossil Energy Office of Strategic Petroleum Reserve (SPR). The ORNL Fossil Energy Program research and development activities cover the areas of coal, clean coal technology, gas, petroleum, and support tomore » the SPR. An important part of the Fossil Energy Program is technical management of all activities on the DOE Fossil Energy Advanced Research (AR) Materials Program. The AR Materials Program involves research at other DOE and government laboratories, at universities, and at industrial organizations.« less

Old Age Income Security in Canada

PubMed Central

Willard, J. W.

1965-01-01

The position of older people in modern industrial society is markedly removed from the early industrial norm of continued participation in gainful employment until the end of life. Acceptance of a retirement age some 13 years before the end of average male life expectancy has brought with it serious social problems. At the same time, however, an increasingly productive economy has provided both the willingness and ability to complement the retirement provisions of individual initiative with public programs of old age income maintenance. This public support began in Canada with the voluntary approach embodied in the government annuities plan. A program of “public assistance” followed. These were succeeded, first, by the “universal payment” under the Old Age Security Act and, more recently, by the social insurance approach of the Canada Pension Plan. Along with improved public support, the role of occupational pension plans and of individually initiated retirement provisions continues to be substantial. Current interest in, and in some cases legislation on, such problems as vesting and solvency are leading to improvements in private pension programs. PMID:5828720

US Rocket Propulsion Industrial Base Health Metrics

NASA Technical Reports Server (NTRS)

Doreswamy, Rajiv

2013-01-01

The number of active liquid rocket engine and solid rocket motor development programs has severely declined since the "space race" of the 1950s and 1960s center dot This downward trend has been exacerbated by the retirement of the Space Shuttle, transition from the Constellation Program to the Space launch System (SLS) and similar activity in DoD programs center dot In addition with consolidation in the industry, the rocket propulsion industrial base is under stress. To Improve the "health" of the RPIB, we need to understand - The current condition of the RPIB - How this compares to past history - The trend of RPIB health center dot This drives the need for a concise set of "metrics" - Analogous to the basic data a physician uses to determine the state of health of his patients - Easy to measure and collect - The trend is often more useful than the actual data point - Can be used to focus on problem areas and develop preventative measures The nation's capability to conceive, design, develop, manufacture, test, and support missions using liquid rocket engines and solid rocket motors that are critical to its national security, economic health and growth, and future scientific needs. center dot The RPIB encompasses US government, academic, and commercial (including industry primes and their supplier base) research, development, test, evaluation, and manufacturing capabilities and facilities. center dot The RPIB includes the skilled workforce, related intellectual property, engineering and support services, and supply chain operations and management. This definition touches the five main segments of the U.S. RPIB as categorized by the USG: defense, intelligence community, civil government, academia, and commercial sector. The nation's capability to conceive, design, develop, manufacture, test, and support missions using liquid rocket engines and solid rocket motors that are critical to its national security, economic health and growth, and future scientific needs. center dot The RPIB encompasses US government, academic, and commercial (including industry primes and their supplier base) research, development, test, evaluation, and manufacturing capabilities and facilities. center dot The RPIB includes the skilled workforce, related intellectual property, engineering and support services, and supply chain operations and management. This definition touches the five main segments of the U.S. RPIB as categorized by the USG: defense, intelligence community, civil government, academia, and commercial sector.

Assessment of educational research capabilities at selected minority institutions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jones, W.J.

1983-07-01

A university, or consortia, to be engaged in DOE R and D programs, must be a source of high quality science, be able to mount multidisciplinary efforts, be dedicated to the agency mission, and be able to bring together unique outside resources if not available elsewhere. The DOE should establish a process through which the minority institutions can more fully participate in the funded research process and not be subjected to criticism which has any reasonable chance of being valid. The DOE should support efforts to establish opportunity for access to and participation in all of the DOE programs bymore » minority colleges and universities so that they can become resources that can contribute to the solution of the nation's energy problems through: involvement in research and development programs of the DOE, and eventually in those of other agencies and industry; education and training of the quantities of personnel needed in energy, energy technology, energy-related issues and disciplines; planning, decision and preparation of quality interdisciplinary curricula; acquisition of the understanding of energy, energy technology, and energy-related issues and policy necessary for technology and information transfer to the local community, industry, academia, and governments; and support of exploratory research in unique projects and new ideas prior to the researcher's obtaining longer-term support elsewhere.« less

Reconstruction Under Fire: Unifying Civil and Military Counterinsurgency

DTIC Science & Technology

2009-01-01

NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND...route with Pakistan, Highway 1, runs through Jalalabad. The Afghan Investment Support Agency is building an industrial park east of Jalalabad along...chose the following three focus areas for analysis. Build roads.• Build an industrial park.• Facilitate the planting and operating of orchards.• 34

A Policy and Program for Invigorating Science and Technology for National Security

DTIC Science & Technology

2014-04-01

technical support – academia competes against industry often appearing as cheap labour but then without generating commercially viable or sustainable...have new technology approved too bureaucratic keeping SME’s out of the market DSTO provide greater transparency of S&T goals to enable industry to...national security S&T. In endeavouring to meet the Government’s desire to reduce red tape and cognisant of the tight financial environment, consideration

GSFC Technical Outreach: The Capitol College Model

NASA Technical Reports Server (NTRS)

Marius, Julio L.; Wagner, David

2008-01-01

In February 2005, as part of the National Aeronautic and Space Administration (NASA) Technical Outreach Program, Goddard Space Flight Center (GSFC) awarded Capitol College of Laurel, Maryland an Educational Grant to establish a Space Operation academic curriculum to meet the future needs of mission operations engineers. This was in part due to the aerospace industry and GSFC concerns that a large number of professional engineers are projected to retire in the near term with evidence showing that current enrollment in engineering schools will not produce sufficient number of space operation trained engineers that will meet industry and government demands. Capitol College, under the agreement of the Educational Grant, established the Space Operations Institute (SOI) with a new curriculum in Space Operations that was approved and certified by the State of Maryland. The SO1 programs focuses on attracting, recruiting, and training a pipeline of highly qualified engineers with experience in mission operations, system engineering and development. The selected students are integrated as members of the engineering support team in any of the missions supported by the institute. The students are mentored by professional engineers from several aerospace companies that support GSFC. Initially, the institute was involved in providing console engineers and mission planning trainees for the Upper Atmosphere Research Satellite (UARS), the Earth Radiation Budget Satellite (ERBS) and the Total Ozone Mapping Spectrometer mission (TOMS). Subsequently, the students were also involved in the technology refresh of the TOMS ground system and other mission operations development. Further mission assignment by GSFC management included participation in the Tropical Rainfall Measuring Mission (TRMM) mission operations and ground system technology refresh. The SOI program has been very successful. Since October 2005, sixty-four students have been enrolled in the SOI program and twenty-five have already graduated from the program, nineteen of whom are employed by company's supporting GSFC. Due to the success of the program, the initial grant period was extended for another period of two years. This paper presents the process that established the SOI as a viable pipeline of mission operations engineers, the lessons learned in the process of dealing with grants, and experience gained in mentoring engineering students that are responsible for particular areas of expertise and functionality. This paper can also be considered a case study and model for integrating a student team with government and industry professionals in the real world of mission operations.

Facility Composer (Trademark) and PACES (Trademark) Integration: Development of an XML Interface Based on Industry Foundation Classes

DTIC Science & Technology

2007-11-01

Engineer- ing Research Laboratory is currently developing a set of facility ‘architec- tural’ programming tools , called Facility ComposerTM (FC). FC...requirements in the early phases of project development. As the facility program, crite- ria, and requirements are chosen, these tools populate the IFC...developing a set of facility “ar- chitectural” programming tools , called Facility Composer (FC), to support the capture and tracking of facility criteria

Research and Technology at the John F. Kennedy Space Center 1993

NASA Technical Reports Server (NTRS)

1993-01-01

As the NASA Center responsible for assembly, checkout, servicing, launch, recovery, and operational support of Space Transportation System elements and payloads, the John F. Kennedy Space Center is placing increasing emphasis on its advanced technology development program. This program encompasses the efforts of the Engineering Development Directorate laboratories, most of the KSC operations contractors, academia, and selected commercial industries - all working in a team effort within their own areas of expertise. This edition of the Kennedy Space Center Research and Technology 1993 Annual Report covers efforts of all these contributors to the KSC advanced technology development program, as well as our technology transfer activities. Major areas of research include material science, advanced software, industrial engineering, nondestructive evaluation, life sciences, atmospheric sciences, environmental technology, robotics, and electronics and instrumentation.

Strategies for the Canadian Smallsat Program

NASA Astrophysics Data System (ADS)

Symonds, M. D.

1993-11-01

Canadian industry working together with government representatives have evolved a strategic approach to defining a proposed Canadian Smallsat Program. The strategy is outlined and a framework is established for subsequent papers on industrial infrastructure and specific missions. The strategic objective is to establish a national capability, providing international leadership, and being a low-cost fast-response supplier in providing total system solutions. A major element of the strategy is a vertically integrated, low cost, team approach combining the expertise of various centers of excellence to provide an end-to-end systems capability. This expertise will address Canadian needs but will be export focused. It is proposed that Canada support a series of missions to establish the industrial infrastructure and demonstrate these capabilities. In selecting the missions, consideration is given to the commercial market factors, but scientific interest in smallsats is also recognized.

The Hawthorne experiments and the introduction of Jean Piaget in American industrial psychology, 1929-1932.

PubMed

Hsueh, Yeh

2002-05-01

The Hawthorne interview program between 1929 and 1932 was one of the most significant industrial studies in the United States. The Hawthorne researchers applied Jean Piaget's clinical method in their extensive interviews with tens of thousands of workers. Chiefly responsible for the program's methodology was Elton Mayo, an Australian who saw interviewing as a means to promote social cooperation. Previous discussions of the Hawthorne experiments have ignored the influence of Piaget in the social sciences. This article provides an account of Mayo's and the Hawthorne researchers' efforts to fuse Piaget's innovation with burgeoning American industrial psychology. The endeavor was not an isolated event but rather drew on the theories and practice of Janet-Piaget psychology, on the support of the Laura Spelman Rockefeller Memorial Foundation, and on the discourse among social scientists about Piaget's work.

Enhancing industry-based dissemination of an occupational sun protection program with theory-based strategies employing personal contact.

PubMed

Buller, David B; Andersen, Peter A; Walkosz, Barbara J; Scott, Michael D; Cutter, Gary R; Dignan, Mark B; Kane, Ilima L; Zhang, Xiao

2012-01-01

Industry-based strategies for dissemination of an evidence-based occupational sun protection program, Go Sun Smart (GSS), were tested. Two dissemination strategies were compared in a randomized trial in 2004-2007. The North American ski industry. Ski areas in the United States and Canada (n  =  69) and their senior managers (n  =  469). Employers received GSS through a basic dissemination strategy (BDS) from the industry's professional association that included conference presentations and free starter kits. Half of the areas also received the enhanced dissemination strategy (EDS), in which project staff met face-to-face with managers and made ongoing contacts to support program use. Observation of program materials in use and managers' reports on communication about sun protection. The effects of two alternative dissemination strategies were compared on program use using PROC MIXED in SAS, adjusted for covariates using one-tailed p values. Ski areas receiving the EDS used more GSS materials (x¯  =  7.36) than those receiving the BDS (x¯  =  5.17; F  =  7.82, p < .01). Managers from more areas receiving the EDS reported communicating about sun protection in employee newsletters/flyers (x¯  =  .97, p  =  .04), in guest e-mail messages (x¯  =  .75, p  =  .02), and on ski area Web sites (x¯  =  .38, p  =  .02) than those receiving the BDS (x¯  =  .84, .50, .15, respectively). Industry professional associations play an important role in disseminating prevention programs; however, active personal communication may be essential to ensure increased implementation fidelity.

Exploration of government policy structure which support and block energy transition process in indonesia using system dynamics model

NASA Astrophysics Data System (ADS)

Destyanto, A. R.; Silalahi, T. D.; Hidayatno, A.

2017-11-01

System dynamic modeling is widely used to predict and simulate the energy system in several countries. One of the applications of system dynamics is to evaluate national energy policy alternatives, and energy efficiency analysis. Using system dynamic modeling, this research aims to evaluate the energy transition policy that has been implemented in Indonesia on the past conversion program of kerosene to LPG for household cook fuel consumption, which considered as successful energy transition program implemented since 2007. This research is important since Indonesia considered not yet succeeded to execute another energy transition program on conversion program of oil fuel to gas fuel for transportation that has started since 1989. The aim of this research is to explore which policy intervention that has significant contribution to support or even block the conversion program. Findings in this simulation show that policy intervention to withdraw the kerosene supply and government push to increase production capacity of the support equipment industries (gas stove, regulator, and LPG Cylinder) is the main influence on the success of the program conversion program.

IT Knowledge Requirements Identification in Organizational Networks: Cooperation Between Industrial Organizations and Universities

NASA Astrophysics Data System (ADS)

Rudzajs, Peteris; Kirikova, Marite

ICT professionals face rapid technology development, changes in design paradigms, methodologies, approaches, and cooperation patterns. These changes impact relationships between universities that teach ICT disciplines and industrial organizations that develop and use ICT-based products. The required knowledge and skills of university graduates depend mainly on the current industrial situation; therefore the university graduates have to meet industry requirements which are stated at the time point of their graduation, not at the start of their studies. Continuous cooperation between universities and industrial organizations is needed to identify a time and situation-dependent set of knowledge requirements, which lead to situation aware, industry acknowledged, balanced and productive ICT study programs. This chapter proposes information systems solutions supporting cooperation between the university and the industrial organizations with respect to curriculum development in ICT area.

Synthetic fuels: an industry struggles to be born amidst the perils of techno-econo-politics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Heyman, M.

1976-04-01

Despite active planning for a variety of large-scale synthetic fuels projects and some encouraging technical achievements, most proposals have become bogged down, and disheartened supporters are reluctant to proceed further until the economic, environmental, and political atmosphere clears up. The top-level study group urged a variety of federal financial incentives be provided to spur construction and operation of twelve to 15 synthetic fuel first-of-a-kind ''commercial demonstration'' projects. While hopefully contributing a daily 350,000 barrels of oil equivalent by the middle of the next decade, a prime justification for embarking on the commercialization program would be to provide specific environmental, economic,more » and technical information that is currently lacking. The task force specifically pushed for: loan guarantees of up to 75 percent of project cost for high-Btu pipeline gas from coal, loan guarantees for as much as 50 percent of project cost for shale oil, syncrude, and unregulated electric utility or industrial fuels along with price supports; construction grants of up to 50 percent of project costs for regulated utility and industrial fuels; and a maximum of 75 percent in loan guarantees for production of liquids and gases from biomass. Direct combustion of solid wastes for energy recovery was considered inappropriate for inclusion in the program. That particular industry was viewed by the task force as already on its way in response to urban needs. Industry and congressional responses to the incentives are reviewed. (MCW)« less

Cyber Security Testing and Training Programs for Industrial Control Systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Daniel Noyes

2012-03-01

Service providers rely on industrial control systems (ICS) to manage the flow of water at dams, open breakers on power grids, control ventilation and cooling in nuclear power plants, and more. In today's interconnected environment, this can present a serious cyber security challenge. To combat this growing challenge, government, private industry, and academia are working together to reduce cyber risks. The Idaho National Laboratory (INL) is a key contributor to the Department of Energy National SCADA Test Bed (NSTB) and the Department of Homeland Security (DHS) Control Systems Security Program (CSSP), both of which focus on improving the overall securitymore » posture of ICS in the national critical infrastructure. In support of the NSTB, INL hosts a dedicated SCADA testing facility which consists of multiple control systems supplied by leading national and international manufacturers. Within the test bed, INL researchers systematically examine control system components and work to identify vulnerabilities. In support of the CSSP, INL develops and conducts training courses which are designed to increase awareness and defensive capabilities for IT/Control System professionals. These trainings vary from web-based cyber security trainings for control systems engineers to more advanced hands-on training that culminates with a Red Team/ Blue Team exercise that is conducted within an actual control systems environment. INL also provides staffing and operational support to the DHS Industrial Control Systems Cyber Emergency Response Team (ICS-CERT) Security Operations Center which responds to and analyzes control systems cyber incidents across the 18 US critical infrastructure sectors.« less

Wind Power Today and Tomorrow

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

Wind Power Today and Tomorrow is an annual publication that provides an overview of the wind research conducted under the U.S. Department of Energy's Wind and Hydropower Technologies Program. The purpose of Wind Power Today and Tomorrow is to show how DOE supports wind turbine research and deployment in hopes of furthering the advancement of wind technologies that produce clean, low-cost, reliable energy. Content objectives include: educate readers about the advantages and potential for widespread deployment of wind energy; explain the program's objectives and goals; describe the program's accomplishments in research and application; examine the barriers to widespread deployment; describemore » the benefits of continued research and development; facilitate technology transfer; and attract cooperative wind energy projects with industry. This 2003 edition of the program overview also includes discussions about wind industry growth in 2003, how DOE is taking advantage of low wind speed region s through advancing technology, and distributed applications for small wind turbines.« less

ERA-MIN: The European network (ERA-NET) on non-energy raw materials

NASA Astrophysics Data System (ADS)

vidal, o.; christmann, p.; Bol, d.; Goffé, b.; Groth, m.; Kohler, e.; Persson Nelson, k.; Schumacher, k.

2012-04-01

Non-energy raw materials are vital for the EU's economy, and for the development of environmentally friendly technologies. The EU is the world's largest consumers of non-energy minerals, but it remains dependent on the importation of many metals, as its domestic production is limited to about 3% of world production. We will present the project ERA-MIN, which is an ERA-NET on the Industrial Handling of Raw Materials for European industries, financially supported by the European Commission. The main objectives of ERA-MIN are: 1) Mapping and Networking: interconnecting the members of the currently fragmented European mineral resources research area, to the aim of fostering convergence of public research programs, industry, research institutes, academia and the European Commission, 2) Coordinating: establishing a permanent mechanism for planning and coordination of the European non-energy mineral raw materials research community (ENERC). 3) Roadmapping: defining the most important scientific and technological challenges that should be supported by the EU and its state members, 4) Programming: designing a Joint European Research Programme model and implementating it into a call for proposals open to academic and industrial research. The topics of interest in ERA-MIN are the primary continental and marine resources, the secondary resources and their related technologies, substitution and material efficiency, along with transversal topics such as environmental impact, public policy support, mineral intelligence, and public education and teaching. Public scientific research is very central in the scope of the ERA-MIN activity, whose consortium is indeed lead by a public organisation of fundamental research. Thus, universities and public research organisations are warmly invited to play an active role in defining the scientific questions and challenges that shall determine the European Raw Materials Roadmap and should be addressed by joint programming at the European scale. The various levels of possible involvement in ERA-MIN for the interested stakeholders will be presented.

Aging, Counterfeiting Configuration Control (AC3)

DTIC Science & Technology

2010-01-31

SARA continuously polls contributing data sources on a data specific refresh cycle. SARA supports a continuous risk topology assessment by the program...function was demonstrated at the bread -board level based on comparison of North American Industrialization Classification System (NAICS) codes. Other

Energy Audit of the Boston and Maine Railroad

DOT National Transportation Integrated Search

1981-04-01

This report documents an energy audit of the Boston and Maine (B&M) Railroad performed in support of a joint Government/industry program to determine means of conserving energy on railroads without reducing safety or service quality. The audit was pe...

Protecting workers in the home care industry: workers' experienced job demands, resource gaps, and benefits following a socially supportive intervention.

PubMed

Mabry, Linda; Parker, Kelsey N; Thompson, Sharon V; Bettencourt, Katrina M; Haque, Afsara; Luther Rhoten, Kristy; Wright, Rob R; Hess, Jennifer A; Olson, Ryan

2018-05-02

The Community of Practice and Safety Support (COMPASS) program is a peer-led group intervention for home care workers. In a randomized controlled trial, COMPASS significantly improved workers' professional support networks and safety and health behaviors. However, quantitative findings failed to capture workers' complex emotional, physical, and social experiences with job demands, resource limitations, and the intervention itself. Therefore, we conducted qualitative follow-up interviews with a sample of participants (n = 28) in the program. Results provided examples of unique physical and psychological demands, revealed stressful resource limitations (e.g., safety equipment access), and elucidated COMPASS's role as a valuable resource.

The Impact of The Stock Market Game on Financial Literacy and Mathematics Achievement: Results from a National Randomized Controlled Trial

ERIC Educational Resources Information Center

Hinojosa, Trisha; Miller, Shazia; Swanlund, Andrew; Hallberg, Kelly; Brown, Megan; O'Brien, Brenna

2010-01-01

The Stock Market Game[TM] is an educational program supported by the Securities Industry and Financial Markets Association (SIFMA) Foundation for Investor Education. The program is designed to teach students the importance of saving and investing by building their financial literacy skills. The primary focus of the study was to measure the impact…

S&T in the Asia-Pacific Region

DTIC Science & Technology

2001-12-01

to perform research that supports their academic programs; and has several other programs to encourage entrepreneurship by university or TAFE...nature are best performed internally223. DSTO does already interface with the academic and industrial communities, both directly and through...AUTHOR(S) 5d. PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) Office of Naval Research

PA014-- Deception and Doubt --Strategies for Undermining and Supporting Global Climate Science--PA014

NASA Astrophysics Data System (ADS)

Nelson, C.

2012-12-01

DECEPTION AND DOUBT--STRATEGIES FOR UNDERMINING AND SUPPORTING GLOBAL CLIMATE SCIENCE--PA014 The fundamental strategy for undermining confidence in the now substantial scientific consensus about global warming is to sow doubt about the degree of consensus. Rather than mount an obvious anti-science stance, commercial interests seek to champion science, arguing for better science, more complete and definitive science. This strategy has a sixty-year history, beginning with the tobacco industry in the 1950s and proceeding through the chemical, energy, paint, and other industries. Thousands of faculty members have quietly sold themselves as public spokespersons or confidential consultants to industry in the service of this strategy. A multipart program--involving educating people about this history and exposing faculty collaboration--may help free climate science from those who aim to distort its conclusions.

Academia, advocacy, and industry: a collaborative method for clinical research advancement.

PubMed

Vanzo, Rena J; Lortz, Amanda; Calhoun, Amy R U L; Carey, John C

2014-07-01

Professionals who work in academia, advocacy, and industry often carry out mutually exclusive activities related to research and clinical care. However, there are several examples of collaboration among such professionals that ultimately allows for improved scientific and clinical understanding. This commentary recounts our particular experience (a collaboration between geneticists at the Universities of Minnesota and Utah, the 4p- Support Group, and Lineagen, Inc) and reviews other similar projects. We formally propose this collaborative method as a conduit for future clinical research programs. Specifically, we encourage academicians, directors of family/advocacy/support groups, and members of industry to establish partnerships and document their experiences. The medical community as a whole will benefit from such partnerships and, specifically, families will teach us lessons that could never be learned in a laboratory or textbook. © 2014 Wiley Periodicals, Inc.

Flow in porous media, phase behavior and ultralow interfacial tensions: mechanisms of enhanced petroleum recovery. Final technical report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Davis, H.T.; Scriven, L.E.

1982-01-01

A major program of university research, longer-ranged and more fundamental in approach than industrial research, into basic mechanisms of enhancing petroleum recovery and into underlying physics, chemistry, geology, applied mathematics, computation, and engineering science has been built at Minnesota. The 1982 outputs of the interdisciplinary team of investigators were again ideas, instruments, techniques, data, understanding and skilled people: forty-one scientific and engineering papers in leading journals; four pioneering Ph.D. theses; numerous presentations to scientific and technical meetings, and to industrial, governmental and university laboratories; vigorous program of research visits to and from Minnesota; and two outstanding Ph.D.'s to research positionsmore » in the petroleum industry, one to a university faculty position, one to research leadership in a governmental institute. This report summarizes the 1982 papers and theses and features sixteen major accomplishments of the program during that year. Abstracts of all forty-five publications in the permanent literature are appended. Further details of information transfer and personnel exchange with industrial, governmental and university laboratories appear in 1982 Quarterly Reports available from the Department of Energy and are not reproduced here. The Minnesota program continues in 1983, notwithstanding earlier uncertainty about the DOE funding which finally materialized and is the bulk of support. Supplemental grants-in-aid from nine companies in the petroleum industry are important, as are the limited University and departmental contributions. 839 references, 172 figures, 29 tables.« less

Tobacco industry research on smoking cessation. Recapturing young adults and other recent quitters.

PubMed

Ling, Pamela M; Glantz, Stanton A

2004-05-01

Smoking rates are declining in the United States, except for young adults (age 18 to 24). Few organized programs target smoking cessation specifically for young adults, except programs for pregnant women. In contrast, the tobacco industry has invested much time and money studying young adult smoking patterns. Some of these data are now available in documents released through litigation. Review tobacco industry marketing research on smoking cessation to guide new interventions and improve clinical practice, particularly to address young adult smokers' needs. Analysis of previously secret tobacco industry documents. Compared to their share of the smoking population, young adult smokers have the highest spontaneous quitting rates. About 10% to 30% of smokers want to quit; light smokers and brand switchers are more likely to try. Tobacco companies attempted to deter quitting by developing products that appeared to be less addictive or more socially acceptable. Contrary to consumer expectations, "ultra low tar" cigarette smokers were actually less likely to quit. Tobacco industry views of young adult quitting behavior contrast with clinical practice. Tobacco marketers concentrate on recapturing young quitters, while organized smoking cessation programs are primarily used by older smokers. As young people have both the greatest propensity to quit and the greatest potential benefits from smoking cessation, targeted programs for young adults are needed. Tobacco marketing data suggest that aspirational messages that decrease the social acceptability of smoking and support smoke-free environments resonate best with young adult smokers' motivations.

Tobacco Industry Research on Smoking Cessation

PubMed Central

Ling, Pamela M; Glantz, Stanton A

2004-01-01

BACKGROUND Smoking rates are declining in the United States, except for young adults (age 18 to 24). Few organized programs target smoking cessation specifically for young adults, except programs for pregnant women. In contrast, the tobacco industry has invested much time and money studying young adult smoking patterns. Some of these data are now available in documents released through litigation. OBJECTIVE Review tobacco industry marketing research on smoking cessation to guide new interventions and improve clinical practice, particularly to address young adult smokers’ needs. METHODS Analysis of previously secret tobacco industry documents. RESULTS Compared to their share of the smoking population, young adult smokers have the highest spontaneous quitting rates. About 10% to 30% of smokers want to quit; light smokers and brand switchers are more likely to try. Tobacco companies attempted to deter quitting by developing products that appeared to be less addictive or more socially acceptable. Contrary to consumer expectations, “ultra low tar” cigarette smokers were actually less likely to quit. CONCLUSIONS Tobacco industry views of young adult quitting behavior contrast with clinical practice. Tobacco marketers concentrate on recapturing young quitters, while organized smoking cessation programs are primarily used by older smokers. As young people have both the greatest propensity to quit and the greatest potential benefits from smoking cessation, targeted programs for young adults are needed. Tobacco marketing data suggest that aspirational messages that decrease the social acceptability of smoking and support smoke-free environments resonate best with young adult smokers’ motivations. PMID:15109339

Spray Forming Aluminum - Final Report (Phase II)

DOE Office of Scientific and Technical Information (OSTI.GOV)

D. D. Leon

1999-07-08

The U.S. Department of Energy - Office of Industrial Technology (DOE) has an objective to increase energy efficient and enhance competitiveness of American metals industries. To support this objective, ALCOA Inc. entered into a cooperative program to develop spray forming technology for aluminum. This Phase II of the DOE Spray Forming Program would translate bench scale spray forming technology into a cost effective world class process for commercialization. Developments under DOE Cooperative Agreement No. DE-FC07-94ID13238 occurred during two time periods due to budgetary constraints; April 1994 through September 1996 and October 1997 and December 1998. During these periods, ALCOA Incmore » developed a linear spray forming nozzle and specific support processes capable of scale-up for commercial production of aluminum sheet alloy products. Emphasis was given to alloys 3003 and 6111, both being commercially significant alloys used in the automotive industry. The report reviews research performed in the following areas: Nozzel Development, Fabrication, Deposition, Metal Characterization, Computer Simulation and Economics. With the formation of a Holding Company, all intellectual property developed in Phases I and II of the Project have been documented under separate cover for licensing to domestic producers.« less

Proceedings of the Twentieth NASA Propagation Experimenters Meeting (NAPEX XX) and the Advanced Communications Technology Satellite (ACTS) Propagation Studies Miniworkshop

NASA Technical Reports Server (NTRS)

Golshan, Nassar (Editor)

1996-01-01

The NASA Propagation Experimenters (NAPEX) Meeting and associated Advanced Communications Technology Satellite (ACTS) Propagation Studies Miniworkshop convene yearly to discuss studies supported by the NASA Propagation Program. Representatives from the satellite communications (satcom)industry, academia, and government with an interest in space-ground radio wave propagation have peer discussion of work in progress, disseminate propagation results, and interact with the satcom industry. NAPEX XX, in Fairbanks, Alaska, June 4-5, 1996, had three sessions: (1) "ACTS Propagation Study: Background, Objectives, and Outcomes," covered results from thirteen station-years of Ka-band experiments; (2) "Propagation Studies for Mobile and Personal Satellite Applications," provided the latest developments in measurement, modeling, and dissemination of propagation phenomena of interest to the mobile, personal, and aeronautical satcom industry; and (3)"Propagation Research Topics," covered a range of topics including space/ground optical propagation experiments, propagation databases, the NASA Propagation Web Site, and revision plans for the NASA propagation effects handbooks. The ACTS Miniworkshop, June 6, 1996, covered ACTS status, engineering support for ACTS propagation terminals, and the ACTS Propagation Data Center. A plenary session made specific recommendations for the future direction of the program.

MS PHD'S: A Successful Model Promoting Inclusion, Preparation and Engagement of Underrepresented Minorities within the Geosciences Workforce

NASA Astrophysics Data System (ADS)

Padilla, E.; Scott, O.; Strickland, J. T.; Ricciardi, L.; Guzman, W. I.; Braxton, L.; Williamson, V.; Johnson, A.

2015-12-01

According to 2014 findings of the National Research Council, geoscience and related industries indicate an anticipated 48,000 blue-collar, scientific, and managerial positions to be filled by underrepresented minority (URM) workers in the next 15 years. An Information Handling Services (IHS) report prepared for the American Petroleum Institute forecasts even greater numbers estimating upward of 408,000 opportunities for URM workers related to growth in accelerated development of oil, gas and petroleum industries. However, many URM students lack the training in both the hard sciences and craft skills necessary to fill these positions. The Minorities Striving and Pursuing Higher Degrees of Success in Earth System Science (MS PHD'S) Professional Development Program uses integrative and holistic strategies to better prepare URM students for entry into all levels of the geoscience workforce. Through a three-phase program of mentoring, community building, networking and professional development activities, MS PHD'S promotes collaboration, critical thinking, and soft skills development for participants. Program activities expose URM students to education, training and real-life geoscience workforce experiences while maintaining a continuity of supportive mentoring and training networks via an active virtual community. MS PHD'S participants report increased self-confidence and self-efficacy in pursuing geoscience workforce goals. To date, the program supports 223 participants of who 57, 21 and 16 have received Doctorate, Masters and Baccalaureate degrees respectively and are currently employed within the geoscience and related industries workforce. The remaining 129 participants are enrolled in undergraduate and graduate programs throughout the U.S. Geographic representation of participants includes 35 states, the District of Columbia, Puerto Rico and two international postdoctoral appointments - one in Saudi Arabia and the other in France.

Integrated worker health protection and promotion programs: overview and perspectives on health and economic outcomes.

PubMed

Pronk, Nicolaas P

2013-12-01

To describe integrated worker health protection and promotion (IWHPP) program characteristics, to discuss the rationale for the integration of occupational safety and health and worksite health promotion programs, and to summarize what is known about the impact of these programs on health and economic outcomes. A descriptive assessment of the current state of the IWHPP field and a review of studies on the effectiveness of IWHPP programs on health and economic outcomes were undertaken. Sufficient evidence of effectiveness was found for IWHPP programs when health outcomes were considered. Impact on productivity-related outcomes is considered promising, but inconclusive, whereas insufficient evidence was found for health care expenditures. Existing evidence supports an integrated approach in terms of health outcomes but will benefit significantly from research designed to support the business case for employers of various company sizes and industry types.

Integrated Worker Health Protection and Promotion Programs: Overview and Perspectives on Health and Economic Outcomes

PubMed Central

Pronk, Nicolaas P.

2014-01-01

Objective To describe integrated worker health protection and promotion (IWHPP) program characteristics, to discuss the rationale for integration of OSH and WHP programs, and to summarize what is known about the impact of these programs on health and economic outcomes. Methods A descriptive assessment of the current state of the IWHPP field and a review of studies on the effectiveness of IWHPP programs on health and economic outcomes. Results Sufficient evidence of effectiveness was found for IWHPP programs when health outcomes are considered. Impact on productivity-related outcomes is considered promising, but inconclusive, whereas insufficient evidence was found for health care expenditures. Conclusions Existing evidence supports an integrated approach in terms of health outcomes but will benefit significantly from research designed to support the business case for employers of various company sizes and industry types. PMID:24284747

Mechanics of Textile Composites Conference. Part 1

NASA Technical Reports Server (NTRS)

Poe, Clarence C., Jr. (Editor); Harris, Charles E. (Editor)

1995-01-01

This document is a compilation of papers presented at the Mechanics of Textile Composites Conference in Hampton, Virginia, December 6-8, 1994. This conference was the culmination of a 3-year program that was initiated by NASA late in 1990 to develop mechanics of textile composites in support of the NASA Advanced Composites Technology Program (ACT). The goal of the program was to develop mathematical models of textile preform materials and test methods to facilitate structural analysis and design. Participants in the program were from NASA, academia, and industry.

Study on Web-Based Tool for Regional Agriculture Industry Structure Optimization Using Ajax

NASA Astrophysics Data System (ADS)

Huang, Xiaodong; Zhu, Yeping

According to the research status of regional agriculture industry structure adjustment information system and the current development of information technology, this paper takes web-based regional agriculture industry structure optimization tool as research target. This paper introduces Ajax technology and related application frameworks to build an auxiliary toolkit of decision support system for agricultural policy maker and economy researcher. The toolkit includes a “one page” style component of regional agriculture industry structure optimization which provides agile arguments setting method that enables applying sensitivity analysis and usage of data and comparative advantage analysis result, and a component that can solve the linear programming model and its dual problem by simplex method.

Pake Prize: The Evolving Nature of Industrial Research

NASA Astrophysics Data System (ADS)

Compton, W. Dale

2014-03-01

The support of basic research in the physical sciences expanded rather quickly in the late 1950s and into the 1960s stimulated, in part, by the successful contribution of the scientific effort to the Second World War. Many in industry took on the challenge of creating research activities that focused on basic research. Many of these activities slowed in the 1970s and 1980s because of events in the economy and the marketplace. The challenges confronting the industrial research complexes were many. Retaining the high standards of quality in the research organization, encouraging partial realignment of programs to be more supportive of product lines and the various pressures arising from legislative measures to increase product efficiencies while reducing unwanted pollutants into the atmosphere, to name a few. Some of the highlights of the past 50 years will be reviewed using automotive industry examples. There will be another talk from Paul Grant for the next 36 minutes. I do not have his abstract yet but it has been requested.

The role of academic institutions in the development of drugs for rare and neglected diseases.

PubMed

Coles, L D; Cloyd, J C

2012-08-01

There are approximately 7,000 rare disorders, many of which are life-threatening. Diagnosis is often problematic, and therapies are few. Before the passage of the Orphan Drug Act in 1983, neither the pharmaceutical industry nor universities devoted much effort to research on rare diseases. Important changes have occurred within and outside universities that position them to play a significant role in developing orphan drugs. Several models are being employed to promote drug-related research, including disease-focused, discovery-focused, development-focused, and industry-partnership-focused approaches. However, significant barriers challenge universities' ability to fully contribute to orphan drug development. Academic institutions, along with industry, government, and not-for-profit organizations, must address these issues in order to advance the field. New initiatives designed to increase university-based orphan drug research include creating mechanisms to ensure program continuity, building research and regulatory support infrastructure, facilitating commercialization, expanding government support, and developing mutually beneficial partnerships among academe, industry, and government.

NASA Propulsion Engineering Research Center, volume 1

NASA Technical Reports Server (NTRS)

1993-01-01

Over the past year, the Propulsion Engineering Research Center at The Pennsylvania State University continued its progress toward meeting the goals of NASA's University Space Engineering Research Centers (USERC) program. The USERC program was initiated in 1988 by the Office of Aeronautics and Space Technology to provide an invigorating force to drive technology advancements in the U.S. space industry. The Propulsion Center's role in this effort is to provide a fundamental basis from which the technology advances in propulsion can be derived. To fulfill this role, an integrated program was developed that focuses research efforts on key technical areas, provides students with a broad education in traditional propulsion-related science and engineering disciplines, and provides minority and other under-represented students with opportunities to take their first step toward professional careers in propulsion engineering. The program is made efficient by incorporating government propulsion laboratories and the U.S. propulsion industry into the program through extensive interactions and research involvement. The Center is comprised of faculty, professional staff, and graduate and undergraduate students working on a broad spectrum of research issues related to propulsion. The Center's research focus encompasses both current and advanced propulsion concepts for space transportation, with a research emphasis on liquid propellant rocket engines. The liquid rocket engine research includes programs in combustion and turbomachinery. Other space transportation modes that are being addressed include anti-matter, electric, nuclear, and solid propellant propulsion. Outside funding supports a significant fraction of Center research, with the major portion of the basic USERC grant being used for graduate student support and recruitment. The remainder of the USERC funds are used to support programs to increase minority student enrollment in engineering, to maintain Center infrastructure, and to develop research capability in key new areas. Significant research programs in propulsion systems for air and land transportation complement the space propulsion focus. The primary mission of the Center is student education. The student program emphasizes formal class work and research in classical engineering and science disciplines with applications to propulsion.

Investing In The Army Organic Industrial Base To Operate And Win In A Complex And Austere Environment

DTIC Science & Technology

2016-05-26

Complex and Austere Environment Sb. GRANT NUMBER Sc. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) Sd. PROJECT NUMBER MAJ Sun Ryu Se. TASK NUMBER Sf...supports the United States Armed Forces to project combat power during hostilities. In 2014, TRADOC published the new Army Operating Concept (AOC...Sustaining the Army Organic Industrial Base in the Post- Afghanistan Conflict Era” (Civilian Research Project , US Army War College, 2014), 1. 8

Solar buildings program contract summary, calendar year 1999

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

2000-06-07

The mission of the US Department of Energy's Solar Buildings Program is to advance the development and widespread deployment of competitive solar thermal technologies for use in buildings. The long-term goal of the Program is to combine solar energy technologies with energy-efficient construction techniques and create cost-effective buildings that have a zero net need for fossil fuel energy on an annual basis. The Solar Buildings Program conducts research and development on solar technologies that can deliver heat, light, and hot water to residential and commercial buildings. By working closely with manufacturers in both the buildings and solar energy industries andmore » by supporting research at universities and national laboratories, the Solar Buildings Program brings together the diverse players developing reliable and affordable solar technologies for building applications. The National Renewable Energy Laboratory (NREL) in Golden, Colorado, and Sandia National Laboratories (SNL) in Albuquerque, New Mexico, jointly participate in the Solar Buildings Program. These two national laboratories work closely with industry researching new concepts, developing technology improvements, reducing manufacturing costs, monitoring system performance, promoting quality assurance, and identifying potential new markets. In calendar year 1999, the Solar Buildings Program focused primarily on solar hot water system research and development (R and D), US industry manufacturing assistance, and US market assistance. The Program also completed a number of other projects that were begun in earlier years. This Contract Summary describes the Program's contracted activities that were active during 1999.« less

Virtual Reality Based Support System for Layout Planning and Programming of an Industrial Robotic Work Cell

PubMed Central

Yap, Hwa Jen; Taha, Zahari; Md Dawal, Siti Zawiah; Chang, Siow-Wee

2014-01-01

Traditional robotic work cell design and programming are considered inefficient and outdated in current industrial and market demands. In this research, virtual reality (VR) technology is used to improve human-robot interface, whereby complicated commands or programming knowledge is not required. The proposed solution, known as VR-based Programming of a Robotic Work Cell (VR-Rocell), consists of two sub-programmes, which are VR-Robotic Work Cell Layout (VR-RoWL) and VR-based Robot Teaching System (VR-RoT). VR-RoWL is developed to assign the layout design for an industrial robotic work cell, whereby VR-RoT is developed to overcome safety issues and lack of trained personnel in robot programming. Simple and user-friendly interfaces are designed for inexperienced users to generate robot commands without damaging the robot or interrupting the production line. The user is able to attempt numerous times to attain an optimum solution. A case study is conducted in the Robotics Laboratory to assemble an electronics casing and it is found that the output models are compatible with commercial software without loss of information. Furthermore, the generated KUKA commands are workable when loaded into a commercial simulator. The operation of the actual robotic work cell shows that the errors may be due to the dynamics of the KUKA robot rather than the accuracy of the generated programme. Therefore, it is concluded that the virtual reality based solution approach can be implemented in an industrial robotic work cell. PMID:25360663

Virtual reality based support system for layout planning and programming of an industrial robotic work cell.

PubMed

Yap, Hwa Jen; Taha, Zahari; Dawal, Siti Zawiah Md; Chang, Siow-Wee

2014-01-01

Traditional robotic work cell design and programming are considered inefficient and outdated in current industrial and market demands. In this research, virtual reality (VR) technology is used to improve human-robot interface, whereby complicated commands or programming knowledge is not required. The proposed solution, known as VR-based Programming of a Robotic Work Cell (VR-Rocell), consists of two sub-programmes, which are VR-Robotic Work Cell Layout (VR-RoWL) and VR-based Robot Teaching System (VR-RoT). VR-RoWL is developed to assign the layout design for an industrial robotic work cell, whereby VR-RoT is developed to overcome safety issues and lack of trained personnel in robot programming. Simple and user-friendly interfaces are designed for inexperienced users to generate robot commands without damaging the robot or interrupting the production line. The user is able to attempt numerous times to attain an optimum solution. A case study is conducted in the Robotics Laboratory to assemble an electronics casing and it is found that the output models are compatible with commercial software without loss of information. Furthermore, the generated KUKA commands are workable when loaded into a commercial simulator. The operation of the actual robotic work cell shows that the errors may be due to the dynamics of the KUKA robot rather than the accuracy of the generated programme. Therefore, it is concluded that the virtual reality based solution approach can be implemented in an industrial robotic work cell.

[The organization of preventive examinations in the system of medical support of industrial enterprises].

PubMed

Zeliaieva, N V; Kamaiev, I A; Gurvich, N I

2017-01-01

The article presents the results of analysis of actual system of medical support of industrial enterprises and consumer estimate of accessibility o and quality of organization of medical examinations during dispensarization. The new form of complex medical examinations is proposed combining capacity of programs of examination of periodical medical check-ups of workers of enterprises and the first stage of dispensarization implemented on the basis of of integrated medical organization according to developed regulations. On the basis of increasing coverage of workers with measures of dispensarization the economic efficiency of complex medical examinations at the expense of decreasing of economic burden of chronic non-infectious diseases is substantiated.

Picture Wall (Glass Structures)

NASA Technical Reports Server (NTRS)

1978-01-01

Photo shows a subway station in Toronto, Ontario, which is entirely glass-enclosed. The all-glass structure was made possible by a unique glazing concept developed by PPG Industries, Pittsburgh, Pennsylvania, one of the largest U.S. manufacturers of flat glass. In the TVS glazing system, transparent glass "fins" replace conventional vertical support members used to provide support for wind load resistance. For stiffening, silicone sealant bonds the fins to adjacent glass panels. At its glass research center near Pittsburgh, PPG Industries uses the NASTRAN computer program to analyze the stability of enclosures made entirely of glass. The company also uses NASTRAN to simulate stresses on large containers of molten glass and to analyze stress effects of solar heating on flat glass.

Employer-Based Programs to Support Breastfeeding Among Working Mothers: A Systematic Review.

PubMed

Dinour, Lauren M; Szaro, Jacalyn M

2017-04-01

Many mothers experience barriers to maintaining a breastfeeding relationship with their infants upon returning to work and, consequently, terminate breastfeeding earlier than recommended or intended. As such, employers are in a unique position to help further increase breastfeeding rates, durations, and exclusivity. The purpose of this review is to examine the literature regarding employer-based programs, policies, and interventions to support breastfeeding among working mothers. A systematic literature search was conducted for peer-reviewed articles published before April 2016. Studies were included if they focused on workplace-based lactation/breastfeeding support programs, policies, or interventions to promote breastfeeding among employees. For inclusion, articles must have measured at least one outcome, such as breastfeeding duration, breastfeeding exclusivity, or employee satisfaction. Twenty-two articles were included, representing 10 different countries and both public- and private-sector employers, including governmental offices, schools, hospitals, manufacturing/industrial companies, and financial settings, among others. Providing a lactation space was the most common employer-based support accommodation studied, followed by breastfeeding breaks and comprehensive lactation support programs. The majority of studies analyzing these three support types found at least one positive breastfeeding and/or nonbreastfeeding outcome. This review suggests that maintaining breastfeeding while working is not only possible but also more likely when employers provide the supports that women need to do so. Although some employers may have more extensive breastfeeding support policies and practices than others, all employers can implement a breastfeeding support program that fits their company's budget and resources.

Marketing the use of the space environment for the processing of biological and pharmaceutical materials

NASA Technical Reports Server (NTRS)

1984-01-01

The perceptions of U.S. biotechnology and pharmaceutical companies concerning the potential use of the space environment for the processing of biological substances was examined. Physical phenomena that may be important in space-base processing of biological materials are identified and discussed in the context of past and current experiment programs. The capabilities of NASA to support future research and development, and to engage in cooperative risk sharing programs with industry are discussed. Meetings were held with several biotechnology and pharmaceutical companies to provide data for an analysis of the attitudes and perceptions of these industries toward the use of the space environment. Recommendations are made for actions that might be taken by NASA to facilitate the marketing of the use of the space environment, and in particular the Space Shuttle, to the biotechnology and pharmaceutical industries.

Enhancing Industry-based Dissemination of an Occupational Sun Protection Program with Theory-based Strategies Employing Personal Contact

PubMed Central

Buller, David B.; Andersen, Peter A.; Walkosz, Barbara J.; Scott, Michael D.; Cutter, Gary R.; Dignan, Mark B.; Kane, Ilima L.; Zhang, Xiao

2012-01-01

Purpose Industry-based strategies for dissemination of an evidence-based occupational sun protection program, Go Sun Smart (GSS), were tested. Design Two dissemination strategies were compared in a randomized trial in 2004 – 2007. Setting The North American ski industry. Subjects Ski areas in the United States and Canada (n=69) and their senior managers (n=469). Intervention Employers received GSS through a Basic Dissemination Strategy (BDS) from the industry’s professional association which included conference presentations and free starter kits. Half of the areas also received the Enhanced Dissemination Strategy (EDS), in which project staff met face-to-face with managers and made ongoing contacts to support program use. Measures Observation of program materials in use and managers’ reports on communication about sun protection. Analysis The effects of two alternative dissemination strategies were compared on program use using PROC MIXED in SAS, adjusted for covariates using 1-tailed p-values. Results Ski areas receiving the EDS used more GSS materials (M=7.36) than those receiving the BDS (M=5.17; F=7.82, p<.01). Managers from more areas receiving the EDS reported communicating about sun protection in employee newsletters/flyers (M=0.97, p=.04), in guest email messages (M=0.75, p=.02), and on ski area websites (M=0.38, p=.02) than those receiving the BDS (M=0.84, 0.50, 0.15, respectively). Conclusion Industry professional associations play an important role in disseminating prevention programs; however, active personal communication may be essential to ensure increased implementation fidelity. PMID:22747318

An assessment of the government liquid hydrogen requirements for the 1995-2005 time frame

NASA Technical Reports Server (NTRS)

Bain, Addison

1990-01-01

The results of government study of long range liquid hydrogen (LH2) requirements for the time period of 1995 through the year 2005 are presented. To assure an adequate supply of LH2 is available in support of various programs, it is imperative a long range projection of LH2 requirements be developed and maintained. This information is vital in planning for necessary procurement actions and assuring adequate industry lead time to acquiring the necessary production and distribution capabilities. The Advanced Launch System and High-Altitude Long-Endurance programs may represent the predominant government needs for LH2 in the long range. The assembled data clearly indicates a need for KSC (Kennedy Space Center) constant program/project surveillance. Also clear is the need for KSC to monitor industry's plans for LH2 plant production and distribution expansion.

Worker Protection: Notifying Workers at Risk of Occupational Disease

DTIC Science & Technology

1987-05-11

on legislative proposals to establish a federal health risk notification program for workers exposed to hazardous substances. Under such a program the... employee populations and individuals found to be at risk, and (3) provide medical and support information and services to notified workers .) Similar...chemicals be evaluated and information about the hazards be made available to workers in the manufacturing industry. Labor’s Occupational Safety and Health

Department of Defense Chemical and Biological Defense Program. Annual Report to Congress

DTIC Science & Technology

2008-05-01

defense system acquisition costs through collaboration in the areas of development, production , and support, and to enhance interoperability with...security area leverages S&T efforts of the other product areas. Where unmet requirements are identified and where S&T is required to meet cost ...Defense Program Inventory Requirements The industrial base, which has scaled down since the end of the Cold War, has stabilized. Ongoing military

Final Technical Report - DE-EE0003542

DOE Office of Scientific and Technical Information (OSTI.GOV)

Haley, James D

Wind has provided energy for thousands of years: some of the earliest windmill engineering designs date back to ancient Babylonia and India where wind would be used as a source of irrigation. Today, wind is the quickest growing resource in Americas expanding energy infrastructure. However, to continue to positively diversify Americas energy portfolio and further reduce the countrys reliance of foreign oil, the industry must grow substantially over the next two decades in both turbine installations and skilled industrial manpower to support. The wind sector is still an emergent industry requiring maturation and development of its labor force: dedicated trainingmore » is needed to provide the hard and soft skills to support the increasingly complex wind turbine generators as the technology evolves. Furthermore, the American workforce is facing a steep decline in available labor resources as the baby boomer generation enters retirement age. It is therefore vital that a process is quickly created for supporting the next generation of wind technicians. However, the manpower growth must incorporate three key components. First, the safety and technical training curriculum must be standardized across the industry - current wind educational programs are disparate and dedicated standardization programs must be further refined and implemented. Second, it is essential that the wind sector avoid disrupting other energy production industries by cannibalizing workers, which would indirectly affect the rest of Americas energy portfolio. The future wind workforce must be created organically utilizing either young people entering the workforce or train personnel emerging from careers outside of energy production. Third, the training must be quick and efficient as large amounts of wind turbines are being erected each year and this growth is expected to continue until at least 2035. One source that matches these three requirements is personnel transitioning from military service to the civilian sector. Utilizing the labor pool of transitioning military personnel and a dedicated training program specifically tailored to military hard and soft skills, the wind workforce can rapidly expand with highly skilled personnel. A tailored training program also provides career opportunities to an underutilized labor force as the personnel return from active military duty. This projects goal was to create a Wind Workforce Development Program that streamlines the wind technician training process using industry-leading safety programs and building on existing military experience. The approach used was to gather data from the wind industry, develop the curriculum and test the process to ensure it provides adequate training to equip the technicians as they transition from the military into wind. The platform for the curriculum development is called Personal Qualification Standards (PQS), which is based on the program of the same name from the United States Navy. Not only would the program provide multiple delivery methods of training (including classroom, computer-based training and on-the-job training), but it also is a familiar style of training to many military men and women. By incorporating a familiar method of training, it encourages active participation in the training and reduces the time for personnel to grasp the concept and flow of the training requirements. The program was tested for thoroughness, schedule and efficacy using a 5-person pilot phase during the last two years. The results of the training were a reduction in time to complete training and increased customer satisfaction on client project sites. However, there were obstacles that surfaced and required adaptation throughout the project including method of delivery, curriculum development and project schedules and are discussed in detail throughout the report. There are several key recommendations in the report that discuss additional training infrastructure, scalability within additional alternative energy markets and organizational certification through standardization committees.« less

American Nurses Association Position Statement on guidelines for commercial support of continuing nursing education.

PubMed

1999-01-01

The attached guidelines on "Commercial Support of Continuing Nursing Education" have been developed by the American Nurses Association (ANA) to assist/guide nursing continuing educators who wish to utilize the resources of corporations to provide continuing education programs. These guidelines enable the provider to maintain a balance between the need for industry-supported dissemination of scientific information and promotional activities which meet the requirements of law, as well as professional standards of the American Nurses Association.

Future Concepts for Realtime Data Interfaces for Control Centers

NASA Technical Reports Server (NTRS)

Kearney, Mike W., III

2004-01-01

Existing methods of exchanging realtime data between the major control centers in the International Space Station program have resulted in a patchwork of local formats being imposed on each Mission Control Center. This puts the burden on a data customer to comply with the proprietary data formats of each data supplier. This has increased the cost and complexity for each participant, limited access to mission data and hampered the development of efficient and flexible operations concepts. Ideally, a universal format should be promoted in the industry to prevent the unnecessary burden of each center processing a different data format standard for every external interface with another center. With the broad acceptance of XML and other conventions used in other industries, it is now time for the Aerospace industry to fully engage and establish such a standard. This paper will briefly consider the components that would be required by such a standard (XML schema, data dictionaries, etc.) in order to accomplish the goal of a universal low-cost interface, and acquire broad industry acceptance. We will then examine current approaches being developed by standards bodies and other groups. The current state of CCSDS panel work will be reviewed, with a survey of the degree of industry acceptance. Other widely accepted commercial approaches will be considered, sometimes complimentary to the standards work, but sometimes not. The question is whether de facto industry standards are in concert with, or in conflict with the direction of the standards bodies. And given that state of affairs, the author will consider whether a new program establishing its Mission Control Center should implement a data interface based on those standards. The author proposes that broad industry support to unify the various efforts will enable collaboration between control centers and space programs to a wider degree than is currently available. This will reduce the cost for programs to provide realtime access to their data, hence reducing the cost of access to space, and benefiting the industry as a whole.

Ceramic Technology For Advanced Heat Engines Project

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1990-12-01

Significant accomplishments in fabricating ceramic components for the Department of Energy (DOE), National Aeronautics and Space Administration (NASA), and Department of Defense (DoD) advanced heat engine programs have provided evidence that the operation of ceramic parts in high-temperature engine environments is feasible. However, these programs have also demonstrated that additional research is needed in materials and processing development, design methodology, and data base and life prediction before industry will have a sufficient technology base from which to produce reliable cost-effective ceramic engine components commercially. The objective of the project is to develop the industrial technology base required for reliable ceramicsmore » for application in advanced automotive heat engines. The project approach includes determining the mechanisms controlling reliability, improving processes for fabricating existing ceramics, developing new materials with increased reliability, and testing these materials in simulated engine environments to confirm reliability. Although this is a generic materials project, the focus is on the structural ceramics for advanced gas turbine and diesel engines, ceramic bearings and attachments, and ceramic coatings for thermal barrier and wear applications in these engines. This advanced materials technology is being developed in parallel and close coordination with the ongoing DOE and industry proof of concept engine development programs. To facilitate the rapid transfer of this technology to U.S. industry, the major portion of the work is being done in the ceramic industry, with technological support from government laboratories, other industrial laboratories, and universities. Abstracts prepared for appropriate papers.« less

Centers of Excellence: A Catalogue

NASA Technical Reports Server (NTRS)

Phelps, Paul B. (Compiler)

1988-01-01

This report summarizes information on State-sponsored 'Centers of Excellence' gathered during a survey of State programs in the Fall of 1987. For the purposes of this catalog, 'Centers of Excellence' refers to organizations or activities with the following characteristics: institutionalized, focused, cooperative Research and Development (R&D) programs; supported in part by State governments, in addition to universities, industry and (in some cases) Federal agencies; performed by teams that may include both industry and university employees; and concentrated on relatively specific R&D agendas, usually with near term commercial or governmental applicability. Most of these activities involve state-of-the-art advancement of new technologies under conditions leading to early practical applications. Not included in this catalog are project-level matching grant programs. The principal purpose of this catalog is to help NASA program management, at all levels. to identify and where appropriate, to initiate relationships with other technology-developing organizations. These State-sponsored programs should be of particular interest, because: they present an opportunity to leverage NASA's R&D investments; they are concentrated at the frontier, yet have a concern for practical applications; and they involve industrial participation under conditions that increase the probability of prompt, widespread dissemination in the form of new or enhanced commercial products, processes, or services.

Launching a Geoscience Career: Insights Gained from MS PHD'S Beyond the PhD

NASA Astrophysics Data System (ADS)

Guzman, W. I.; Johnson, A.; Williamson Whitney, V.; Jansma, P. E.; Huggans, M. J.; Ricciardi, L.

2013-05-01

The Beyond the PhD (B-PhD) Professional Development Program is the newest addition to the Minorities Striving and Pursuing Higher Degrees of Success (MS PHD'S®) Professional Development Program in Earth System Science. This exciting new program is designed to facilitate the development of a new community of underrepresented minority (URM) doctoral candidates and recent doctorate degree recipients in Earth system science (ESS)-related fields. Building upon MS PHD'S extensive professional development activities provided to URM undergraduate and graduate students, B-PhD's vision is to encourage and support URM doctoral students and early career PhD's in becoming part of the global workforce. (Since its inception in 2003, MSPHD'S supports 213 participants of which 42 have achieved the doctoral degree and another 71 are enrolled in doctoral programs.) By providing customized support and advocacy for participants, B-PhD facilitates smoother and informed transitions from graduate school to postdoctoral and tenure-track positions, as well as other "first" jobs in academia, government, industry, and non-profit organizations. In 2011, the first conference for 18 doctoral candidate and recent graduates was hosted at the University of Texas at Arlington's (UTA) College of Science. Using a format of guest speakers, brown bag discussions, and interactive breakout sessions, participants engaged in sessions entitled "Toolkits for Success in Academia, Business and Industry, Federal Government and Non-Profits", "Defining Short, Mid and Long Term Career Goals", "Accessing and Refining Skill Sets and Other Door Openers", "International Preparation and Opportunities", "Paying it Forward/Lifting as You Climb", and "Customized Strategies for Next Steps". This presentation will discuss outcomes from this pilot project, the use of social media to track and support ongoing B-PhD activities, and objectives for future B-PhD workshops.

Highway infrastructure investment and job generation : a look at the positive employment impacts of highway investment

DOT National Transportation Integrated Search

1996-01-01

Construction and related activities financed through the Federal-aid program are important sources of employment for persons in many industries throughout the economy. A diverse workforce representing all skill levels is supported by investment in hi...

SOLVENT-BASED TO WATERBASED ADHESIVE-COATED SUBSTRATE RETROFIT - VOLUME I: COMPARATIVE ANALYSIS

EPA Science Inventory

This volume represents the analysis of case study facilities' experience with waterbased adhesive use and retrofit requirements. (NOTE: The coated and laminated substrate manufacturing industry was selected as part of NRMRL'S support of the 33/50 Program because of its significan...

Performance of selected eastern oyster lines across northeastern US estuaries

USDA-ARS?s Scientific Manuscript database

Eastern oyster production derived from aquaculture has expanded, but growth potential is constrained by losses to disease. Breeding programs supporting industry in the Northeast have targeted resistance to three diseases: MSX, Dermo, and ROD. Selected lines should possess some level of resistance a...

Army Industrial Fund Analytical Study (AIFAS).

DTIC Science & Technology

1984-08-01

Directorate b. Team Members Mr. Joel S. Gordon Mr. Charles Weber c. Other Contributors Mr. Carl B. Bates, Analysis Support Directorate 2. PRODUCT REVIEW...OSD OSD/OMB operati renie budget (COB) ___ budget rve guidance guidance MACGM I I ProgramI Prga MCOIMietr budget COBI iretr decisions VIACOMI

IPAD project overview

NASA Technical Reports Server (NTRS)

Fulton, R. E.

1980-01-01

To respond to national needs for improved productivity in engineering design and manufacturing, a NASA supported joint industry/government project is underway denoted Integrated Programs for Aerospace-Vehicle Design (IPAD). The objective is to improve engineering productivity through better use of computer technology. It focuses on development of technology and associated software for integrated company-wide management of engineering information. The project has been underway since 1976 under the guidance of an Industry Technical Advisory Board (ITAB) composed of representatives of major engineering and computer companies and in close collaboration with the Air Force Integrated Computer-Aided Manufacturing (ICAM) program. Results to date on the IPAD project include an in-depth documentation of a representative design process for a large engineering project, the definition and design of computer-aided design software needed to support that process, and the release of prototype software to integrate selected design functions. Ongoing work concentrates on development of prototype software to manage engineering information, and initial software is nearing release.

Manpower development for the biomedical industry space.

PubMed

Goh, James C H

2013-01-01

The Biomedical Sciences (BMS) Cluster is one of four key pillars of the Singapore economy. The Singapore Government has injected research funding for basic and translational research to attract companies to carry out their commercial R&D activities. To further intensify the R&D efforts, the National Research Foundation (NRF) was set up to coordinate the research activities of different agencies within the larger national framework and to fund strategic R&D initiatives. In recent years, funding agencies began to focus on support of translational and clinical research, particularly those with potential for commercialization. Translational research is beginning to have traction, in particular research funding for the development of innovation medical devices. Therefore, the Biomedical Sciences sector is projected to grow which means that there is a need to invest in human capital development to achieve sustainable growth. In support of this, education and training programs to strengthen the manpower capabilities for the Biomedical Sciences industry have been developed. In recent years, undergraduate and graduate degree courses in biomedical engineering/bioengineering have been developing at a rapid rate. The goal is to train students with skills to understand complex issues of biomedicine and to develop and implement of advanced technological applications to these problems. There are a variety of career opportunities open to graduates in biomedical engineering, however regardless of the type of career choices, students must not only focus on achieving good grades. They have to develop their marketability to employers through internships, overseas exchange programs, and involvement in leadership-type activities. Furthermore, curriculum has to be developed with biomedical innovation in mind and ensure relevance to the industry. The objective of this paper is to present the NUS Bioengineering undergraduate program in relation to manpower development for the biomedical industry in Singapore.

Overview of Advanced Turbine Systems Program

NASA Astrophysics Data System (ADS)

Webb, H. A.; Bajura, R. A.

The US Department of Energy initiated a program to develop advanced gas turbine systems to serve both central power and industrial power generation markets. The Advanced Turbine Systems (ATS) Program will lead to commercial offerings by the private sector by 2002. ATS will be developed to fire natural gas but will be adaptable to coal and biomass firing. The systems will be: highly efficient (15 percent improvement over today's best systems); environmentally superior (10 percent reduction in nitrogen oxides over today's best systems); and cost competitive (10 percent reduction in cost of electricity). The ATS Program has five elements. Innovative cycle development will lead to the demonstration of systems with advanced gas turbine cycles using current gas turbine technology. High temperature development will lead to the increased firing temperatures needed to achieve ATS Program efficiency goals. Ceramic component development/demonstration will expand the current DOE/CE program to demonstrate industrial-scale turbines with ceramic components. Technology base will support the overall program by conducting research and development (R&D) on generic technology issues. Coal application studies will adapt technology developed in the ATS program to coal-fired systems being developed in other DOE programs.

System safety checklist Skylab program report

NASA Technical Reports Server (NTRS)

Mcnail, E. M.

1974-01-01

Design criteria statement applicable to a wide variety of flight systems, experiments and other payloads, associated ground support equipment and facility support systems are presented. The document reflects a composite of experience gained throughout the aerospace industry prior to Skylab and additional experience gained during the Skylab Program. It has been prepared to provide current and future program organizations with a broad source of safety-related design criteria and to suggest methods for systematic and progressive application of the criteria beginning with preliminary development of design requirements and specifications. Recognizing the users obligation to shape the checklist to his particular needs, a summary of the historical background, rationale, objectives, development and implementation approach, and benefits based on Skylab experience has been included.

Highlights from the 17th International Conference on Multi-Criteria Decision Making, Whistler, BC, August 6-11, 2004

DTIC Science & Technology

2005-04-01

related to one of the following areas: 1. Group Decision Support Methods; 2. Decision Support Methods; 3. AHP applications; 4. Multi...Objective Linear Programming (MOLP) algorithms; 5. Industrial engineering applications; 6. Behavioural considerations, and 7. Fuzzy MCDM. 3...making. This is especially important when using software like AHP or when constructing questionnaires for SME’s ( see [10] for many examples

On-site cell field test support program

NASA Astrophysics Data System (ADS)

Staniunas, J. W.; Merten, G. P.

1982-09-01

Utility sites for data monitoring were reviewed and selected. Each of these sites will be instrumented and its energy requirements monitored and analyzed for one year prior to the selection of 40 Kilowatt fuel cell field test sites. Analyses in support of the selection of sites for instrumentation shows that many building sectors offered considerable market potential. These sectors include nursing home, health club, restaurant, industrial, hotel/motel and apartment.

NASA Technology Demonstrations Missions Program Overview

NASA Technical Reports Server (NTRS)

Turner, Susan

2011-01-01

The National Aeronautics and Space Administration (NASA) Fiscal Year 2010 (FY10) budget introduced a new strategic plan that placed renewed emphasis on advanced missions beyond Earth orbit. This supports NASA s 2011 strategic goal to create innovative new space technologies for our exploration, science, and economic future. As a result of this focus on undertaking many and more complex missions, NASA placed its attention on a greater investment in technology development, and this shift resulted in the establishment of the Technology Demonstrations Missions (TDM) Program. The TDM Program, within the newly formed NASA Office of the Chief Technologist, supports NASA s grand challenges by providing a steady cadence of advanced space technology demonstrations (Figure 1), allowing the infusion of flexible path capabilities for future exploration. The TDM Program's goal is to mature crosscutting capabilities to flight readiness in support of multiple future space missions, including flight test projects where demonstration is needed before the capability can transition to direct mission The TDM Program has several unique criteria that set it apart from other NASA program offices. For instance, the TDM Office matures a small number of technologies that are of benefit to multiple customers to flight technology readiness level (TRL) 6 through relevant environment testing on a 3-year development schedule. These technologies must be crosscutting, which is defined as technology with potential to benefit multiple mission directorates, other government agencies, or the aerospace industry, and they must capture significant public interest and awareness. These projects will rely heavily on industry partner collaboration, and funding is capped for all elements of the flight test demonstration including planning, hardware development, software development, launch costs, ground operations, and post-test assessments. In order to inspire collaboration across government and industry, more than 70% of the TDM funds will be competitively awarded as a result of yearly calls for proposed flight demonstrators and selected based on possible payoff to NASA, technology maturity, customer interest, cost, and technical risk reduction. This paper will give an overview of the TDM Program s mission and organization, as well as its current status in delivering advanced space technologies that will enable more flexible and robust future missions. It also will provide several examples of missions that fit within these parameters and expected outcomes.

AACE: an innovative partnership to enhance aircraft safety

NASA Astrophysics Data System (ADS)

Shurtleff, William W.

1999-01-01

The Federal Aviation Administration established the Airworthiness Assurance Center of Excellence (AACE) in September 1997, through a cooperative agreement grant with Iowa State University (ISU) and The Ohio State University (OSU). A technical support contract with the Center is now in place as well. Initially the Center has five areas of concentration supporting advances in airworthiness assurance. These are 1. Maintenance, inspection, and repair, 2. Propulsion and fuel systems safety, 3. Crashworthiness, 4. Advanced materials, and 5. Landing gear systems performance and safety. AACE has nine core members who provide guidance to the Program Management Office at ISU/OSU through a Board of Directors. The core members are: Arizona State University, Iowa State University, Northwestern University, The Ohio State University, University of Dayton, University of Maryland, University of California - Los Angeles, Wichita State University, and Sandia National Laboratories. The organization also includes numerous academic affiliates, industry partners, government laboratories and other organizations. The Center now has over thirty technical projects supporting technical advances in airworthiness assurance. All these projects have industry guidance and support. This paper discusses the current technical program of the center and the highlights of the five-year plan for technical work. Also included is a description of the factors that make the Center an innovative partnership to promote aircraft safety.

Influence of moderate-to-strong anisotropic non-Kolmogorov turbulence on intensity fluctuations of a Gaussian–Schell model beam in marine atmosphere

NASA Astrophysics Data System (ADS)

Cheng, Mingjian; Guo, Lixin; Li, Jiangting

2018-05-01

Not Available Project supported by the Open Research Fund of State Key Laboratory of Pulsed Power Laser Technology (Grant No. SKL2016KF05), the Key Industrial Innovation Chain Project in Industrial Domain, China (Grant No. 2017ZDCXL-GY-06-02), the Huawei Innovation Research Program, China (Grant No. HO2017050001AG), and the Foundation for Innovative Research Groups of the National Natural Science Foundation of China (Grant No. 61621005).

FAA/NASA UAS Traffic Management Pilot Program (UPP)

NASA Technical Reports Server (NTRS)

Johnson, Ronald D.; Kopardekar, Parimal H.; Rios, Joseph L.

2018-01-01

NASA Ames is leading ATM R&D organization. NASA started working on UTM in 2012, it's come a long way primarily due to close relationship with FAA and industry. We have a research transition team between FAA and NASA for UTM. We have a few other RTTs as well. UTM is a great example of collaborative innovation, and now it's reaching very exciting stage of UTM Pilot Project (UPP). NASA is supporting FAA and industry to make the UPP most productive and successful.

[Three types of brand name loyalty strategies set up by drug manufacturers].

PubMed

PréMont, Marie-Claude; Gagnon, Marc-André

2014-11-01

The recent restructuring of the pharmaceutical industry has led to three new types of promotional strategies to build patient loyalty to brand name drugs: loyalty through rebates, patient support, and compassion programs. Loyalty through rebates seeks to keep patients on a brand name drug and prevent their switch to the generic equivalent. Loyalty through patient support provides aftersales services to help and support patients (by phone or home visits) in order to improve adherence to their treatments. Finally, compassion programs offer patients access to drugs still awaiting regulatory approval or reimbursement by insurers. When and if the approval process is successful, the manufacturer puts an end to the compassion program and benefits from a significant cohort of patients already taking a very expensive drug for which reimbursement is assured. The impact of these programs on public policies and patients' rights raises numerous concerns, among which the direct access to patients and their health information by drug manufacturers and upward pressure on costs for drug insurance plans.

Addressing the Underrepresentation of Women in Physics at Multiple Levels

NASA Astrophysics Data System (ADS)

Greco, Shannon; Dominguez, Arturo; Ortiz, Deedee; Zwicker, Andrew

2016-10-01

APS provides support to several universities and research institutions to host Conferences for Undergraduate Women in Physics (CUWiP). The goal of these Conferences is to provide practical tools and a community to help women persist in physics and STEM careers. This is particularly relevant for the DPP where women make up only 7% of the membership. In January 2017, Princeton University and the Princeton Plasma Physics Laboratory (PPPL) will host a CUWiP. CUWiP and the Science Undergraduate Laboratory Internship (SULI) program expose undergraduates to the variety of possible careers in plasma physics and fusion energy in academia, government labs or private industry. We will report on the success of a number of PPPL programs to engage women at all levels in physics and highlight how programs such as CUWiP and SULI contribute to this goal. Special thanks to the Department of Energy for supporting PPPL's education programs and to APS for supporting the Conference for Undergraduate Women in Physics.

Empowerment of women for health promotion: a meta-analysis.

PubMed

Kar, S B; Pascual, C A; Chickering, K L

1999-12-01

The objective of this paper is to identify conditions, factors and methods, which empower women and mothers (WAM) for social action and health promotion movements. WAM are the primary caregivers in almost all cultures; they have demonstrated bold leadership under extreme adversity. Consequently, when empowered and involved, WAM can be effective partners in health promotion programs. The methodology includes a meta-analysis of 40 exemplary case studies from across the world, which meet predetermined criteria, to draw implications for social action and health promotion. Cases were selected from industrialized and less-industrialized nations and from four problem domains affecting quality of life and health: (1) human rights, (2) women's equal rights, (3) economic enhancement and (4) health promotion. Content analysis extracted data from all cases on six dimensions: (1) problem, (2) impetus/leadership, (3) macro-environment, (4) methods used, (5) partners/opponents and (6) impact. Analysis identified seven methods frequently used to EMPOWER (acronym): empowerment education and training, media use and advocacy, public education and participation, organizing associations and unions, work training and micro-enterprise, enabling services and support, and rights protection and promotion. Cochran's Q test confirmed significant differences in the frequencies of methods used. The seven EMPOWER methods were used in this order: enabling services, rights protection/promotion, public education, media use/advocacy, and organizing associations/unions, empowerment education, and work training and micro-enterprise. Media and public education were more frequently used by industrialized than non-industrialized societies (X2 tests). While frequencies of methods used varied in all other comparisons, these differences were not statistically significant, suggesting the importance of these methods across problem domains and levels of industrialization. The paper integrates key findings into an empowerment model consisting of five stages: motivation for action, empowerment support, initial individual action, empowerment program, and institutionalization and replication. Implications for policy and health promotion programs are discussed.

Development of a Renewable Hydrogen Production and Fuel Cell Education Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mann, Michael D.

2011-11-20

This report presents the results of a program designed to develop an education program to 1) Provide exposure to the basics of hydrogen-based technologies to a large number of students. This exposure will provide a level of training that will allow students to converse and work with other scientists and engineers in this field. It will also serve to spark a level of interest in a subset of students who will then continue with more advanced coursework and/or research; 2) Provide a “mid-level” training to a moderate level of students. More detailed and directed education will provide students with themore » ability to work to support industry and government development of hydrogen technologies. This level of training would be sufficient to work in the industry, but not be a leader in research and development; and 3) Provide detailed training to a smaller subset of students with a strong interest and propensity to make significant contributions to the technology development. These individuals will have extensive hands-on experience through internships that will play a major role in industry, government, and academia.« less

Buildings and community systems technology transfer support: Task 8, No. 1088

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

Information on items prepared for delivery by the contractor for the Industrial Energy Conservation Program are presented in this document. The information in the following brochures: Integrated Community Energy Systems (ICES); Energy Savings Through Automatic Thermostat Controls; Energy-Conserving Systems in Restaurants; Waste Heat Recovery: More Power from Fuels; and Fuel Cells: A New Kind of Power Plant is included. The Energy Efficiency Logo and 2 photographs are presented. A memo concerning ERDA energy data collection, dated November 4, 1976 and a letter about Goldmark Communications, Inc., dated August 16, 1976 are included. The Energy Efficiency Research pamphlet (EER) is reprinted.more » The following are also included: Working draft - Technology Transfer Section of Buildings Conservation Pad; Environmental Concerns/Industrial Growth - Speech to Industrial Council Workshop, Urban Land Institute, 1976 Fall Meeting, October 5, 1976; discussion on Liquid Nitrogen Freezing for Process Foods; and paper on Buildings and Community Systems Program Strategy. Information on high temperature recuperator systems; microwave/vacuum grain drying; Annual Cycle Energy Systems (ACES); Sambo's; Energy Outreach Program; and thermally activated heat pumps is also included. (MCW)« less

Center for Applied Optics Studies: an investment in Indiana's future

NASA Astrophysics Data System (ADS)

Schuh, Delbert J., II; Khorana, Brij M.

1992-05-01

To understand the involvement of the State of Indiana with the Center for Applied Optics at Rose-Hulman Institute of Technology, it is best to start with an explanation of the Indiana Corporation for Science and Technology (CST), its basic charter and its programs. Established in 1982 as a private not-for-profit corporation, CST was formed to promote economic development within the State of Indiana. Two programs that were initially a part of CST's charter and supported with state dollars were a seed capital investment program, aimed at developing new products and processes, and the establishment of university centers of technology development. The former was conceived to create jobs and new, technologically advanced industries in Indiana. The latter was an attempt to encourage technology transfer from the research laboratories of the state universities to the production lines of Indiana industry. Recently, CST has undergone a name change to the Indiana Business Modernization and Technology Corporation (BMT) and adopted an added responsibility of proactive assistance to small- and medium-sized businesses in order to enhance the state's industrial competitiveness.

Proposed model for interaction between residents and residency training programs, and pharmaceutical industry.

PubMed

Razack, S; Arbour, L; Hutcheon, R

1999-03-01

Medical residents in training are as much targets of pharmaceutical-industry marketing as are physicians in practice. This interaction is often subtle and takes the form of sponsorship of meals at academic events, support for conference travel, books, and items such as pens and notepads. Most residency programs direct little time towards training in ethics and the critical analysis of pharmaceutical-industry marketing. We propose a model for the relationship between residents and residency programs, and the pharmaceutical industry that addresses the need for such interaction to be viewed in light of the patient-centered ethic of professional conduct and the ideal of unbiased medical practice. A committee of residents at different levels of training and two staff physicians received the mandate to examine this issue. The committee developed a set of guidelines and a proposed schema for the handling of funds from pharmaceutical companies (still not implemented). Each residency program would develop a common fund for money donated by pharmaceutical companies. This fund would be administered by a committee with defined priorities. The presence of residents on this committee under staff preceptorship would serve as a springboard for education on the subject. Guidelines for acknowledgement of sponsorship, solicitation of funds, gifts for care of patients, ongoing education, and the wider applicability of these proposals were also developed. Residents' interaction with the pharmaceutical industry during training could have lifelong influence on medical practice. We hope that our model will promote critical appraisal of the potential risks and benefits of this interaction.

Status review of NASA programs for reducing aircraft gas turbine engine emissions

NASA Technical Reports Server (NTRS)

Rudey, R. A.

1976-01-01

The paper describes and discusses the results from some of the research and development programs for reducing aircraft gas turbine engine emissions. Although the paper concentrates on NASA programs only, work supported by other U.S. government agencies and industry has provided considerable data on low emission advanced technology for aircraft gas turbine engine combustors. The results from the two major NASA technology development programs, the ECCP (Experimental Clean Combustor Program) and the PRTP (Pollution Reduction Technology Program), are presented and compared with the requirements of the 1979 U.S. EPA standards. Emission reduction techniques currently being evaluated in these programs are described along with the results and a qualitative assessment of development difficulty.

National Center for Manufacturing Sciences: Environmentally conscious manufacturing

NASA Technical Reports Server (NTRS)

Vinton, Clare

1995-01-01

The purpose of this presentation is to share the results and some of the thinking of the Environmentally Conscious Manufacturing - Strategic Initiative Group (ECM-SIG) at the National Center for Manufacturing Sciences (NCMS). NCMS is a consortium of more than 185 North American Manufacturing organizations comprised of about 75 percent for profit manufacturing companies and about 25 percent nonprofit organizations that support manufacturing activities. NCMS conducts collaborative R&D programs designed to improve global competitiveness of its members and other North American manufacturers to address common issues that are important to manufacturing industries. NCMS is an industry driven organization whose agenda is established by industry with input from appropriate government agencies.

Development of cost effective fenceline monitoring methods to support advanced leak detection and repair strategies

EPA Science Inventory

Improved mitigation of fugitive emissions of hazardous air pollutants (HAPs), volatile organic compounds (VOCs), and greenhouse gas (GHG) emissions is an important emerging topic in many industrial sectors. Efficacious leak detection and repair (LDAR) programs of the future yiel...

Why Our Nation Tolerates Risks to Children.

ERIC Educational Resources Information Center

Penning, Nick

1991-01-01

Contrasts children's well-being and family support services in the United States with superior programs in Germany and other industrialized countries. The American Association of School Administrators considers the Children's Investment Trust, authored by Head Start founding administrator Jule Sugarman, an absolute must for improving children's…

76 FR 80884 - Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-27

...) program, administered by the Office of Travel and Tourism Industries (OTTI) of the International Trade..., 1961, 1981, and 1996 travel and tourism related acts to collect and publish comprehensive international travel and tourism statistics and other marketing information, and (4) support the continuation of the...

Automation U.S.A.: Overcoming Barriers to Automation.

ERIC Educational Resources Information Center

Brody, Herb

1985-01-01

Although labor unions and inadequate technology play minor roles, the principal barrier to factory automation is "fear of change." Related problems include long-term benefits, nontechnical executives, and uncertainty of factory cost accounting. Industry support for university programs is helping to educate engineers to design, implement, and…

Future Orbital Power Systems Technology Requirements

NASA Technical Reports Server (NTRS)

1978-01-01

NASA is actively involved in program planning for missions requiring several orders of magnitude, more energy than in the past. Therefore, a two-day symposium was held to review the technology requirements for future orbital power systems. The purpose of the meeting was to give leaders from government and industry a broad view of current government supported technology efforts and future program plans in space power. It provided a forum for discussion, through workshops, to comment on current and planned programs and to identify opportunities for technology investment. Several papers are presented to review the technology status and the planned programs.

OAST Space Theme Workshop. Volume 1: Summary report. 1: Introduction. 2: General observations and some key findings. 3: Follow-on activity. Quick-look comments and working papers

NASA Technical Reports Server (NTRS)

1976-01-01

The Outlook for Space Study, consideration of National needs and OAST technology goals were factors in the selection of the following themes for candidate technical initiative and supporting program plans: space power station; search for extraterrestrial life; industrialization of space; global service station; exploration of the solar system; and advanced space transportation system. An overview is presented of the Space Theme Workshop activities in developing technology needs, program requirements, and proposed plans in support of each theme. The unedited working papers used by team members are included.

GSA's Green Proving Ground: Identifying, Testing and Evaluating Innovative Technologies (Presentation)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kandt, A.; Lowell, M.

2012-05-01

GSA's Green Proving Ground (GPG) program utilizes GSA's real estate portfolio to test and evaluate innovative and underutilized sustainable building technologies and practices. Findings are used to support the development of GSA performance specifications and inform decision making within GSA, other federal agencies, and the real estate industry. The program aims to drive innovation in environmental performance in federal buildings and help lead market transformation through deployment of new technologies.

Solar Ready Vets Curriculum Design

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dalstrom, Tenley

The 5-week SRV program includes four sets of program learning goals aligned around (1) the NABCEP Entry Level body of knowledge; (2) gaining hands-on experience with solar system site analysis, design, installation, commissioning, operation, maintenance and financial considerations; (3) Safety issues unique to solar + OSHA 30; (4) Transition planning and individual support of entry into the solar industry. These goals, and the learning objectives associate with each, are pursued in parallel during the course.

Advanced energy systems and technologies - National R and D programme

NASA Astrophysics Data System (ADS)

Lund, P. D.

1992-08-01

The energy R and D in Finland is accomplished through the energy research programs of the Ministry of Trade and Industry. Today there are some 12 R and D programs in operation covering the various aspects of the energy sector. The NEMO-program deals with advanced new energy technologies and systems. The NEMO-program was launched in 1988 and it ends at the end of 1992. Helsinki University of Technology has been responsible for the coordination and most of the universities, research centers, and companies on new advanced energy technologies have been involved in the realization of NEMO. The objectives of the program have been to assess the potential of new technologies in the Finnish energy supply system, encourage and support businesses, and to create necessary research tradition in Finland. At the beginning in year 1988, several new technologies were included, but as the knowledge has increased, focusing on the most promising fields has taken place. Wind and solar energy show the best promises in respect to business activities and possibilities for utilization in Finland. Energy storage some other advanced technologies such as fuel cells and hydrogen technologies represented in the NEMO-program have an important role, but the commercial applications lie more distant in the future. The NEMO-program has reached its objectives. The international evaluation in fall 1990 gave very positive feedback and the scientific quality of the work was found good. At the same time, the contents was still focused more on commercial applications to support national industries in the field. The descriptions of the ongoing NEMO research projects are included in this report.

IMPACT OF THE U.S. SUPPORT PROGRAM SAFEGUARDS INTERNSHIP PROGRAM.

DOE Office of Scientific and Technical Information (OSTI.GOV)

PEPPER, S.; OSIECKI, C.

2006-07-16

The U.S. Support Program began funding an internship program in the IAEA Department of Safeguards in 2002. Since that time, 39 U.S. citizens and permanent residents have been placed in one-year, paid internships with the IAEA. The management of the internship program was originally the responsibility of the International Safeguards Project Office but was transferred to the Office of Educational Programs at Brookhaven National Laboratory in 2004. Feedback on the internship program from the U.S. government and the IAEA has been positive. The interns have completed basic yet essential work for the Department of Safeguards and freed IAEA staff membersmore » to perform more complex tasks. The cost of an intern is low relative to other forms of human resources support. After the conclusion of their assignments, many of the interns go on to work for the U.S. government, the national laboratories, or companies in international safeguards and nonproliferation. This paper will discuss the work done by the interns for the IAEA, factors influencing the success of the internship program, and the effects the program has had on the careers of interns, in preparing the next generation to work in the nuclear industry, participation in INMM activities, and recruitment for U.S. citizens for safeguards positions.« less

National meeting to review IPAD status and goals. [Integrated Programs for Aerospace-vehicle Design

NASA Technical Reports Server (NTRS)

Fulton, R. E.

1980-01-01

A joint NASA/industry project called Integrated Programs for Aerospace-vehicle Design (IPAD) is described, which has the goal of raising aerospace-industry productivity through the application of computers to integrate company-wide management of engineering data. Basically a general-purpose interactive computing system developed to support engineering design processes, the IPAD design is composed of three major software components: the executive, data management, and geometry and graphics software. Results of IPAD activities include a comprehensive description of a future representative aerospace vehicle design process and its interface to manufacturing, and requirements and preliminary design of a future IPAD software system to integrate engineering activities of an aerospace company having several products under simultaneous development.

Creating biodiversity partnerships: The Nature Conservancy's perspective

NASA Astrophysics Data System (ADS)

Sawhill, John C.

1996-11-01

The Nature Conservancy is an international organization dedicated to the mission of conserving biodiversity throughout the world. By working in a nonconfrontational manner, an approach that has promoted both government and corporate sponsorship of its activities, The Nature Conservancy has developed symbiotic relationships with many electric utility companies. Drawing on the organization's experiences, and the experiences of the author as the President and Chief Executive Officer of The Nature Conservancy, five broad areas of cooperation between conservation organizations and the utility industry are explored: landmanagement agreements, mitigation projects, conflictavoidance programs, program support, and volunteer activities. The paper is concluded with comments on the future trends of biodiversity conservation, challenging the electric utility industry to become involved with conservation efforts by forming cooperative partnerships.

Physical activity promotion in business and industry: evidence, context, and recommendations for a national plan.

PubMed

Pronk, Nicolaas P

2009-11-01

The contemporary workplace setting is in need of interventions that effectively promote higher levels of occupational and habitual physical activity. It is the purpose of this paper to outline an evidence-based approach to promote physical activity in the business and industry sector in support of a National Physical Activity Plan. Comprehensive literature searches identified systematic reviews, comprehensive reviews, and consensus documents on the impact of physical activity interventions in the business and industry sector. A framework for action and priority recommendations for practice and research were generated. Comprehensive, multicomponent work-site programs that include physical activity components generate significant improvements in health, reduce absenteeism and sick leave, and can generate a positive financial return. Specific evidence-based physical activity interventions are presented. Recommendations for practice include implementing comprehensive, multicomponent programs that make physical activity interventions possible, simple, rewarding and relevant in the context of a social-ecological model. The business and industry sector has significant opportunities to improve physical activity among employees, their dependents, and the community at-large and to reap important benefits related to worker health and business performance.

Physical Activity Promotion in Business and Industry: Evidence, Context, and Recommendations for a National Plan.

PubMed

Pronk, Nicolaas P

2009-11-01

The contemporary workplace setting is in need of interventions that effectively promote higher levels of occupational and habitual physical activity. It is the purpose of this paper to outline an evidence-based approach to promote physical activity in the business and industry sector in support of a National Physical Activity Plan. Comprehensive literature searches identified systematic reviews, comprehensive reviews, and consensus documents on the impact of physical activity interventions in the business and industry sector. A framework for action and priority recommendations for practice and research were generated. Comprehensive, multicomponent worksite programs that include physical activity components generate significant improvements in health, reduce absenteeism and sick leave, and can generate a positive financial return. Specific evidence-based physical activity interventions are presented. Recommendations for practice include implementing comprehensive, multicomponent programs that make physical activity interventions possible, simple, rewarding and relevant in the context of a social-ecological model. The business and industry sector has significant opportunities to improve physical activity among employees, their dependents, and the community at-large and to reap important benefits related to worker health and business performance.

Shaping NASA's Earth Science Enterprise Workforce Development Initiative to Address Industry Needs

NASA Technical Reports Server (NTRS)

Rosage, David; Meeson, Blanche W. (Technical Monitor)

2001-01-01

It has been well recognized that the commercial remote sensing industry will expand in new directions, resulting in new applications, thus requiring a larger, more skilled workforce to fill the new positions. In preparation for this change, NASA has initiated a Remote Sensing Professional Development Program to address the workforce needs of this emerging industry by partnering with the private sector, academia, relevant professional societies, and other R&D organizations. Workforce needs will in part include understanding current industry concerns, personnel competencies, current and future skills, growth rates, geographical distributions, certifications, and sources of pre-service and in-service personnel. Dave Rosage of the NASA Goddard Space Flight Center and a panel of MAPPS members will lead a discussion to help NASA specifically address private firms' near and long-term personnel needs to be included in NASA's Remote Sensing Professional Development Program. In addition, Dave Rosage will present perspectives on how remote sensing technologies are evolving, new NASA instruments being developed, and what future workforce skills are expected to support these new developments.

Active and Passive Supplier Assessment Program (ASAP & PSAP) WWW Sites http://nepp.nasa.gov/imd/asap http://nepp.nasa.gov/imd/psap

NASA Technical Reports Server (NTRS)

Brusse, Jay

2000-01-01

The Active and Passive Supplier Assessment Programs (ASAP and PSAP) WWW Sites provide general information to the electronic parts community regarding the availability of electronic parts. They also provide information to NASA regarding modifications to commonly used procurement specifications and test methods. The ASAP and PSAP www sites are ongoing resources produced by Code 562 in support of the NASA HQ funded NASA Electronic Parts and Packaging (NEPP) Program. These WWW sites do not provide information pertaining to patented or proprietary information. All of the information contained in these www sites is available through various other public domain resources such as US Military Qualified Producers Listings (QPLs) and Qualified Manufacturer Listings (QMLs) and industry working groups such as the Electronics Industry Alliance (EIA) and the Space Parts Working Group (SPWG).

The National Geothermal Energy Research Program

NASA Technical Reports Server (NTRS)

Green, R. J.

1974-01-01

The continuous demand for energy and the concern for shortages of conventional energy resources have spurred the nation to consider alternate energy resources, such as geothermal. Although significant growth in the one natural steam field located in the United States has occurred, a major effort is now needed if geothermal energy, in its several forms, is to contribute to the nation's energy supplies. From the early informal efforts of an Interagency Panel for Geothermal Energy Research, a 5-year Federal program has evolved whose objective is the rapid development of a commercial industry for the utilization of geothermal resources for electric power production and other products. The Federal program seeks to evaluate the realistic potential of geothermal energy, to support the necessary research and technology needed to demonstrate the economic and environmental feasibility of the several types of geothermal resources, and to address the legal and institutional problems concerned in the stimulation and regulation of this new industry.

ChemTechLinks: Alliances for Chemical Technician Education

NASA Astrophysics Data System (ADS)

Nameroff, Tamara

2003-09-01

ChemTechLinks (CTL) is a project of the American Chemical Society (ACS) Educational and International Activities Division and funded by the National Science Foundation to support and advance chemistry-based technician education. The project aims to help improve technician education programs, foster academic-industry alliances, provide professional development opportunities for faculty, and increase student recruitment into chemical technology. The CTL Web site serves as an information clearinghouse and link to other ACS resources and programs, including a Web-based, Voluntary Industry Standards (VIS) database, the Chemistry Technician Program Approval Service, the College Chemistry Consultants Service, summer workshops for high school teachers and two-year college faculty that emphasize a technology-oriented curriculum, scholarships for two-year college faculty to attend ACS Short Courses, a self-study instructional guide for faculty to use in preparing for classroom instruction, and information and free recruitment materials about career opportunities in chemistry technology.

Pyrochemical and Dry Processing Methods Program. A selected bibliography

DOE Office of Scientific and Technical Information (OSTI.GOV)

McDuffie, H.F.; Smith, D.H.; Owen, P.T.

1979-03-01

This selected bibliography with abstracts was compiled to provide information support to the Pyrochemical and Dry Processing Methods (PDPM) Program sponsored by DOE and administered by the Argonne National Laboratory. Objectives of the PDPM Program are to evaluate nonaqueous methods of reprocessing spent fuel as a route to the development of proliferation-resistant and diversion-resistant methods for widespread use in the nuclear industry. Emphasis was placed on the literature indexed in the ERDA--DOE Energy Data Base (EDB). The bibliography includes indexes to authors, subject descriptors, EDB subject categories, and titles.

Financing nutrition services in a competitive market.

PubMed

Egan, M C; Kaufman, M

1985-02-01

Budget deficits and inflationary medical care costs threaten nutrition services, which until recently have been funded largely by federal, state, and local revenues. Nutritionists and dietitians responding to demands in the marketplace should develop innovative programs and pursue new sources for financing through the private sector, third-party payers, business/industry health promotion, and consumer fees for their services, as well as targeted federal, state, and locally funded food assistance, nutrition education, and health care programs. Trail-blazing dietitians are successfully offering their services in health maintenance organizations (HMOs), hospital or industry fitness programs, private practice, voluntary health agencies, and official agency programs. With the new federalism, nutritionists must articulate their role in comprehensive health care and market their services at the state and local levels in addition to the federal level. Nutrition services are defined to include assessment, planning, counseling, education, and referral to supportive agencies. Data management, managerial, and marketing skills must be developed for dietitians to compete effectively. Basic educational preparation and continuing education for practicing professionals must develop these competencies.

MANTECH project book

NASA Astrophysics Data System (ADS)

The effective integration of processes, systems, and procedures used in the production of aerospace systems using computer technology is managed by the Integration Technology Division (MTI). Under its auspices are the Information Management Branch, which is actively involved with information management, information sciences and integration, and the Implementation Branch, whose technology areas include computer integrated manufacturing, engineering design, operations research, and material handling and assembly. The Integration Technology Division combines design, manufacturing, and supportability functions within the same organization. The Processing and Fabrication Division manages programs to improve structural and nonstructural materials processing and fabrication. Within this division, the Metals Branch directs the manufacturing methods program for metals and metal matrix composites processing and fabrication. The Nonmetals Branch directs the manufacturing methods programs, which include all manufacturing processes for producing and utilizing propellants, plastics, resins, fibers, composites, fluid elastomers, ceramics, glasses, and coatings. The objective of the Industrial Base Analysis Division is to act as focal point for the USAF industrial base program for productivity, responsiveness, and preparedness planning.

Supporting Inclusive Practicum Experiences for International Students across the Social Sciences: Building Industry Capacity

ERIC Educational Resources Information Center

Felton, Kathleen; Harrison, Gai

2017-01-01

Practicum experiences are critical learning environments for developing requisite skills, knowledge, behaviours and attitudes across the professions. Evidence suggests that international students in professional social and behavioural science programs struggle across a number of dimensions while on practicum. Key issues for these students coalesce…

Secondary aluminum industry final emissions test report: Culp Aluminum Alloys, Steele, Alabama. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

The purpose of this testing program was to obtain emissions data for uncontrolled and controlled hydrochloric acid (HCl), particulate matter (PM) and speciated hydrocarbon Hazardous Air Pollutants (HAPs) from a secondary aluminum processing plant to support a national emission standard for hazardous air pollutants (NESHAP).

Tonomundo: A Public-Private Partnership in Education in Brazil

ERIC Educational Resources Information Center

Parente, Rafael

2013-01-01

The main obstacle for public-private partnerships in their efforts to improve educational quality in Brazil remains implementation -despite, in many cases, extensive support from government officials, educators, and private industry. The challenge of implementing such programs has received little attention from scholars and policy makers. This…

78 FR 12252 - Energy Efficiency Program for Commercial and Industrial Equipment: Public Meeting and...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-22

... parties. DOE is planning to conduct in-depth technical analyses in the following areas: (1) Engineering..., analyses, and processes it anticipates using to determine whether to amend energy conservation standards... impacts, and (10) regulatory impacts. DOE will also conduct several other analyses that support those...

78 FR 730 - State Program Requirements; Approval of Application To Administer Partial National Pollutant...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-04

...) at facilities whose primary industrial activity is storage of grain, feed seed, fertilizer, and... incidentally store grain, feed seed, fertilizer, and agriculture chemicals to support the primary activity of..., except those related to wood preservation and processing regulated pursuant to 40 CFR part 429 (Timber...

FY2017 Advanced Combustion Systems and Fuels Annual Progress Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

None, None

The Advanced Combustion Systems and Fuels Program supports VTO’s goal and focuses early-stage research and development (R&D) to improve understanding of the combustion processes, fuel properties, and emission control technologies while generating knowledge and insight necessary for industry to develop the next generation of engines.

76 FR 36078 - Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-21

... type of feedback from producer and other to enhance future studies and ensure that the informational... assumptions used; (c) ways to enhance the quality, utility and clarity of the information to be collected; (d... on producer and industry support. The NAHMS Program is committed to improving the value of studies...

The Liberal Arts College and Adult Continuing Education: A Rationale.

ERIC Educational Resources Information Center

Courtney, Leonard; Wozniak, John S.

1978-01-01

The feasibility of private liberal arts college involvement with adult and continuing education is examined in terms of a model, which sponsors an Employee Learning Program. Course offerings have received positive support from the college faculty and administration, cautious involvement by business and industry, and meager interest from organized…

77 FR 69579 - Proposed Requirements, Definitions, and Selection Criteria-Native American Career and Technical...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-20

... to support secondary school career and technical education programs. Any Indian tribe, tribal... education schools, local workforce investment boards, business and industry, and intermediaries, as well as... State in which the applicant is located has established under the Elementary and Secondary Education Act...

Improving IS Enrollment Choices: The Role of Social Support

ERIC Educational Resources Information Center

Akbulut-Bailey, Asli

2012-01-01

Over the last decade, enrollment in Information Systems (IS) and related programs has dropped worldwide and still remains low despite positive job market predictions. Given the significant negative consequences of low enrollments on both academia and industry, the IS community has focused its efforts on mechanisms to increase enrollments. This…

U.S. Strategic Nuclear Forces: Background, Developments, and Issues

DTIC Science & Technology

2017-02-10

This program area is specifically seeking to support the solid rocket motor research and development industrial base , so that it will have the...... Research Service Summary Even though the United States is in the process of reducing the number of warheads deployed on its long-range missiles and

78 FR 31283 - Medicare Program; Medical Loss Ratio Requirements for the Medicare Advantage and the Medicare...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-23

... organizations, insurance industry trade groups, provider associations, pharmacist and pharmacy associations, beneficiary advocacy groups, private citizens, and others. Overall, commenters supported our decision to model... enrollees, for 3 consecutive years, it will be forced to stop enrolling new individuals in such Part D...

Technology for Future NASA Missions: Civil Space Technology Initiative (CSTI) and Pathfinder

NASA Technical Reports Server (NTRS)

1988-01-01

Information is presented in viewgraph form on a number of related topics. Information is given on orbit transfer vehicles, spacecraft instruments, spaceborne experiments, university/industry programs, spacecraft propulsion, life support systems, cryogenics, spacecraft power supplies, human factors engineering, spacecraft construction materials, aeroassist, aerobraking and aerothermodynamics.

Requisite Competencies and Skills for E-Merchandisers: Developing an Interdisciplinary Undergraduate Program

ERIC Educational Resources Information Center

Crutsinger, Christy; Forney, Judith C.; Brandon, Lynn; Jackson, Renee S.

2006-01-01

New career opportunities exist for family and consumer sciences (FCS)professionals as traditional formats for shopping service, and information transition to a virtual environment. The requisite competencies and skills necessary for effective online operations are identified. Interactions with industry personnel and supporting literature revealed…

Atlantic salmon breeding program at the National Cold Water Marine Aquaculture Center

USDA-ARS?s Scientific Manuscript database

The USDA-ARS National Cold Water Marine Aquaculture Center (NCWMAC) in Franklin, ME has been supporting the U.S. coldwater marine aquaculture industry for the past thirteen years by developing a genetically improved North American Atlantic salmon. The St. John's River stock was chosen as the focal ...

Space Product Development: NASA Partnering With Industry For Out of This World Results

NASA Technical Reports Server (NTRS)

Nall, Mark E.; Casas, Joe; Powers, Blake; Henderson, Robin N. (Technical Monitor)

2002-01-01

True space commercialization can only be achieved through having the broadest possible industrial participation. Commercial paradigms focused simply on commercial launch operations are not viable since there are limited payload launch opportunities in terms of satellites and similar vehicles, and there are not yet sufficient markets to support large-scale operations and innovation. What is required to expand commercial operations to the point of viability is a broad base of industry that understands the opportunities of commercial space and microgravity operations, and is eager to take advantage of it. Interesting non-aerospace companies in commercial space and microgravity research or operations is a major challenge, since these companies must be educated about the opportunities, introduced into the process in an effective and comfortable manner, and encouraged to continue and expand their work in this area. The NASA Space Product Development Program does this through fifteen Commercial Space Centers located across the United States, each focusing on a different area of interest to industry rather than of interest to NASA. These Centers serve as a consortium of industry, academia, and government, bringing the synergistic effects of membership to the benefit of all. This paper will discuss the guiding philosophies of this program, its organization, the successes obtained by industry in a variety of fields, and the success NASA is experiencing in building the broad base of industry needed to achieve true space commercialization.

Tobacco Industry Youth Smoking Prevention Programs: Protecting the Industry and Hurting Tobacco Control

PubMed Central

Landman, Anne; Ling, Pamela M.; Glantz, Stanton A.

2002-01-01

Objectives. This report describes the history, true goals, and effects of tobacco industry–sponsored youth smoking prevention programs. Methods. We analyzed previously-secret tobacco industry documents. Results. The industry started these programs in the 1980s to forestall legislation that would restrict industry activities. Industry programs portray smoking as an adult choice and fail to discuss how tobacco advertising promotes smoking or the health dangers of smoking. The industry has used these programs to fight taxes, clean-indoor-air laws, and marketing restrictions worldwide. There is no evidence that these programs decrease smoking among youths. Conclusions. Tobacco industry youth programs do more harm than good for tobacco control. The tobacco industry should not be allowed to run or directly fund youth smoking prevention programs. PMID:12036777

A Survey of Research Performed at NASA Langley Research Center's Impact Dynamics Research Facility

NASA Technical Reports Server (NTRS)

Jackson, K. E.; Fasanella, E. L.

2003-01-01

The Impact Dynamics Research Facility (IDRF) is a 240-ft-high gantry structure located at NASA Langley Research Center in Hampton, Virginia. The facility was originally built in 1963 as a lunar landing simulator, allowing the Apollo astronauts to practice lunar landings under realistic conditions. The IDRF was designated a National Historic Landmark in 1985 based on its significant contributions to the Apollo Program. In 1972, the facility was converted to a full-scale crash test facility for light aircraft and rotorcraft. Since that time, the IDRF has been used to perform a wide variety of impact tests on full-scale aircraft and structural components in support of the General Aviation (GA) aircraft industry, the US Department of Defense, the rotorcraft industry, and NASA in-house aeronautics and space research programs. The objective of this paper is to describe most of the major full-scale crash test programs that were performed at this unique, world-class facility since 1974. The past research is divided into six sub-topics: the civil GA aircraft test program, transport aircraft test program, military test programs, space test programs, basic research, and crash modeling and simulation.

Catalog of seismograph stations operated in support of the ERDA Nevada Operations Office, January 1964 thru June 1976

USGS Publications Warehouse

Navarro, R.; Wuollet, Geraldine M.; Bradley, B.R.

1977-01-01

The seismograph stations listed in this catalog were established over the period January 1964 through June 1976 in support of the Energy Research and Development Administration, Nevada (ERDA/NV) underground weapons testing program at the Nevada Test Site (NTS), central Nevada, and Amchitka, Alaska. For station listings before 1964 see Coast and Geodetic Survey publication, "Seismic Data Summary Nuclear Detonation Program 1961 through 1963", by W. V. Mickey and T. R. Shugart, January 1964. Coordinates of stations instrumented for ERDA's Industrial Application Division (IAD, Plowshare) events are published in separate reports (Appendix A, page 66). In addition to the stations for monitoring the testing program, other stations established for specific seismicity studies, such as the Aleutian Seismicity Network, are also listed.

Rideshare programs: a historical perspective

NASA Astrophysics Data System (ADS)

Horais, Brian J.

2000-11-01

In recent years there has been a significant increase in demand for testing, qualification and evaluation of satellite components in space. This will continue to be true with the dramatic growth in remote sensing and communication satellites and constellations. Finding ways to space qualify components and sensors without paying for expensive, dedicated space experiments has prompted a number of aerospace companies (large and small) and government organizations to increase their emphasis on providing low-cost access to space by means of secondary rides on primary payloads and launch vehicle structures. Proactive rideshare brokering is a process that supports space testing by actively providing the information, processes and equipment necessary to support successful space testing. As U.S. space programs have grown in scope and cost, the capacity to accetp risk as part of the development process has diminished - resulting in reduced levels of innovation and erosion of our space industry domination. In contrast, the international space community has instituted a number of innovative processes that support low cost entry to space for small programs. This has stimulated new space systems industries in many countries around the world. This growth is closely coupled with the dynamic growth in the International space launch industry. Proactive rideshare brokering takes a new approach to secondary payload integration. Many commercial and government payload integration services have taken the approach "If you build it they will come." This is not sufficiently aggressive to attract the new technologists who know very little about space testing. Proactive brokering must take a "You must go out and actively seek high-payoff technology payloads" approach to have a true impact on the implementation of new space system technologies. It should also include the application of proven practices from the international payload integration community. The paper draws conclusions by comparing what has been done historically and currently in the international space payload integration community versus what the current practices are in the U.S.. Observations and recommendations are made that reflect a reduced timeline approach and that acknowledge the close coupling between the technology base, the space systems industry, infrastructure and educational processes.

Summaries of physical research in the geosciences

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1990-10-01

The Department of Energy supports research in the geosciences in order to provide a sound foundation of fundamental knowledge in those areas of the geosciences which are germane to the Department of Energy's many missions. The Division of Engineering and Geosciences, part of the Office of Basic Energy Sciences of the Office of Energy Research, supports the Geosciences Research Program. The participants in this program include Department of Energy laboratories, industry, universities, and other governmental agencies. The summaries in this document, prepared by the investigators, briefly describe the scope of the individual programs. The Geosciences Research Program includes research inmore » geology, petrology, geophysics, geochemistry, solar physics, solar-terrestrial relationships, aeronomy, seismology, and natural resource modeling and analysis, including their various subdivisions and interdisciplinary areas. All such research is related either directly or indirectly to the Department of Energy's long-range technological needs.« less

Department of Energy Fiscal Year 1984 authorization (conservation programs and the Energy Information Administration). Hearing before the Subcommittee on Energy Conservation and Supply of the Committee on Energy and Natural Resources, United States Senate, Ninety-Eighth Congress, First Session to review the Department of Energy's Fiscal Year 1984 budget request, March 8, 1983

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1983-01-01

Joseph J. Tribble and J. Erich Evered testified on the 1984 budget requests for DOE's conservation programs and the Energy Information Administration (EIA). Mr. Tribble described the conservation and renewable-energy programs which will continue despite the improved energy-supply situation and with federal support for that research which industry cannot handle alone. He disagreed with committee chairman Lowell Weicker over continued support for state and local energy grants and the transfer of funds for weatherization programs. Mr. Evered described EIA's 1983 accomplishments and its objectives for 1984. An appendix includes correspondence and responses to additional committee questions. (DCK)

Computer Aided Method for System Safety and Reliability Assessments

DTIC Science & Technology

2008-09-01

program between 1998 and 2003. This tool was not marketed in the public domain after the CRV program ended. The other tool is called eXpress, and it...support Government reviewed and approved analyses methodologies which can 5 then be shared with other government agencies and industry partners...Documented for B&R, UP&L, EPRI 30 DEC 80 GO IBM Version Enhanced at UCC , Dallas, Descriptors, Facility to Alter Array Sizes, Explanation of Use 1 SEP 82

The National Nanotechnology Initiative: Research and Development Leading to a Revolution in Technology and Industry. Supplement to the President’s 2012 Budget

DTIC Science & Technology

2011-02-01

safety. In addition , the NIFA SBIR program will continue broadly supporting innovation using nanotechnology in agriculture and food applications... addition , the funded research in the AFRI Emerging Food Safety Issues program area will characterize the toxicity, accumulation, and trophic...goals. To obtain additional information regarding the NSTC, visit the NSTC website at http://www.ostp.gov/cs/nstc. About the Office of Science and

FY 2005 Annual Progress Report for the DOE Hydrogen Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

In cooperation with industry, academia, national laboratories, and other government agencies, the Department of Energy's Hydrogen Program is advancing the state of hydrogen and fuel cell technologies in support of the President's Hydrogen Fuel Initiative. The initiative seeks to develop hydrogen, fuel cell, and infrastructure technologies needed to make it practical and cost-effective for Americans to choose to use fuel cell vehicles by 2020. Significant progress was made in fiscal year 2005 toward that goal.

Field Testing of Environmentally Friendly Drilling System

DOE Office of Scientific and Technical Information (OSTI.GOV)

David Burnett

2009-05-31

The Environmentally Friendly Drilling (EFD) program addresses new low-impact technology that reduces the footprint of drilling activities, integrates light weight drilling rigs with reduced emission engine packages, addresses on-site waste management, optimizes the systems to fit the needs of a specific development sites and provides stewardship of the environment. In addition, the program includes industry, the public, environmental organizations, and elected officials in a collaboration that addresses concerns on development of unconventional natural gas resources in environmentally sensitive areas. The EFD program provides the fundamentals to result in greater access, reasonable regulatory controls, lower development cost and reduction of themore » environmental footprint associated with operations for unconventional natural gas. Industry Sponsors have supported the program with significant financial and technical support. This final report compendium is organized into segments corresponding directly with the DOE approved scope of work for the term 2005-2009 (10 Sections). Each specific project is defined by (a) its goals, (b) its deliverable, and (c) its future direction. A web site has been established that contains all of these detailed engineering reports produced with their efforts. The goals of the project are to (1) identify critical enabling technologies for a prototype low-impact drilling system, (2) test the prototype systems in field laboratories, and (3) demonstrate the advanced technology to show how these practices would benefit the environment.« less

Biological and Chemical Technologies Research at OIT: Annual Summary Report, FY 1997

DOE Office of Scientific and Technical Information (OSTI.GOV)

Peterson, G.

1998-03-01

The annual summary report presents the fiscal year (FY) 1 997 research activities and accomplishments for the United States Department of Energy (DOE) Biological and Chemical Technologies Research (BCTR) Program. This BCTR program resides within the Office of Industrial Technologies (OIT) of the Office of Energy Efficiency and Renewable Energy (EE). The annual summary report for 1997 (ASR 97) contains the following: program description (including BCTR program mission statement, historical background, relevance, goals and objectives); program structure and organization; selected technical and programmatic highlights for 1 997; detailed descriptions of individual projects; and a listing of program output, including amore » bibliography of published work, patents, and awards arising from work supported by the program.« less

Transportation technology program: Strategic plan

NASA Astrophysics Data System (ADS)

1991-09-01

The purpose of this report is to define the technology program required to meet the transportation technology needs for current and future civil space missions. It is a part of an integrated plan, prepared by NASA in part in response to the Augustine Committee recommendations, to describe and advocate expanded and more aggressive efforts in the development of advanced space technologies. This expanded program will provide a technology basis for future space missions to which the U.S. aspires, and will help to regain technology leadership for the U.S. on a broader front. The six aspects of this integrated program/plan deal with focused technologies to support space sciences, exploration, transportation, platforms, and operations as well as provide a Research and Technology Base Program. This volume describes the technologies needed to support transportation systems, e.g., technologies needed for upgrades to current transportation systems and to provide reliable and efficient transportation for future space missions. The Office of Aeronautics, Exploration, and Technology (OAET) solicited technology needs from the major agency technology users and the aerospace industry community and formed a transportation technology team (appendix A) to develop a technology program to respond to those needs related to transportation technologies. This report addresses the results of that team activity. It is a strategic plan intended for use as a planning document rather than as a project management tool. It is anticipated that this document will be primarily utilized by research & technology (R&T) management at the various NASA Centers as well as by officials at NASA Headquarters and by industry in planning their corporate Independent Research and Development (IR&D) investments.

Transportation technology program: Strategic plan

NASA Technical Reports Server (NTRS)

1991-01-01

The purpose of this report is to define the technology program required to meet the transportation technology needs for current and future civil space missions. It is a part of an integrated plan, prepared by NASA in part in response to the Augustine Committee recommendations, to describe and advocate expanded and more aggressive efforts in the development of advanced space technologies. This expanded program will provide a technology basis for future space missions to which the U.S. aspires, and will help to regain technology leadership for the U.S. on a broader front. The six aspects of this integrated program/plan deal with focused technologies to support space sciences, exploration, transportation, platforms, and operations as well as provide a Research and Technology Base Program. This volume describes the technologies needed to support transportation systems, e.g., technologies needed for upgrades to current transportation systems and to provide reliable and efficient transportation for future space missions. The Office of Aeronautics, Exploration, and Technology (OAET) solicited technology needs from the major agency technology users and the aerospace industry community and formed a transportation technology team (appendix A) to develop a technology program to respond to those needs related to transportation technologies. This report addresses the results of that team activity. It is a strategic plan intended for use as a planning document rather than as a project management tool. It is anticipated that this document will be primarily utilized by research & technology (R&T) management at the various NASA Centers as well as by officials at NASA Headquarters and by industry in planning their corporate Independent Research and Development (IR&D) investments.

Organizational characteristics influence implementation of worksite health protection and promotion programs: Evidence from smaller businesses

PubMed Central

McLellan, Deborah L.; Cabán-Martinez, Alberto J.; Nelson, Candace C.; Pronk, Nicolaas P.; Katz, Jeffrey N.; Allen, Jennifer D.; Davis, Kia L.; Wagner, Gregory R.; Sorensen, Glorian

2015-01-01

Objective We explored associations between organizational factors (size, sector, leadership support, and organizational capacity) and implementation of Occupational Safety and Health (OSH) and Worksite Health Promotion (WHP) programs in smaller businesses. Methods We conducted a web-based survey of Human Resource Managers of 117 smaller businesses (<750 employees) and analyzed factors associated with implementation of OSH and WHP among these sites using multivariate analyses. Results Implementation of OSH but not WHP activities were related to industry sector (p= 0.003). Leadership support was positively associated with OSH activities (p<.001), but negatively associated with WHP implementation. Organizational capacity (budgets, staffing, and committee involvement) was associated with implementation of both OSH and WHP. Size was related to neither. Conclusions Leadership support and specifically allocated resources reflecting that support are important factors for implementing OSH and WHP in smaller organizations. PMID:26340290

Internationalized and research-oriented photonics education: Abbe School of Photonics

NASA Astrophysics Data System (ADS)

Helgert, Christian; Nolte, Stefan; Pertsch, Thomas

2015-10-01

The Abbe School of Photonics (ASP) provides and coordinates the optics and photonics education of graduate and doctoral students at the Friedrich Schiller University in Jena, Germany. The internationalized Master's degree program is the key activity in training students in the optical sciences. The program is designed to provide them with the skills necessary to fill challenging positions in industry and academia. Here, an essential factor is ASP's close collaboration with more than 20 German photonics companies. To sustain these partners' future economic development, the availability of highly qualified employees is constantly required. Accordingly, these industrial partners, the European Union, the local state and the federal German government are strongly involved in the sustainable development of ASP's curriculum by both conceptual and financial engagements. The main goal is to promote the students' academic careers and job experience in the photonics industry as well as in academia. To open up the program to students from all over the world, all ASP lectures and courses are taught in English. Since 2009, more than 250 graduate students from more than 40 different countries have been enrolled at the School. Almost 90% of them of non-German nationality, fulfilling the essential ASP philosophy to locally establish an international education program. ASP's qualification strategy is fully research-oriented and based on the principles of academic freedom, competitive research conditions and internationalization at all levels. The education program is complemented by a structured doctoral student support and a prestigious guest professorship program.

Industry progress to market a healthful diet to American children and adolescents.

PubMed

Kraak, Vivica I; Story, Mary; Wartella, Ellen A; Ginter, Jaya

2011-09-01

The IOM released an expert committee report in 2005 that assessed the nature, extent, and influence of food and beverage marketing practices on the diets and health of American children and adolescents. The report concluded that prevailing marketing practices did not support a healthful diet and offered recommendations for diverse stakeholders to promote a healthful diet. The investigators evaluated progress made by food, beverage, and restaurant companies; trade associations; entertainment companies; and the media to achieve the IOM report recommendations over 5 years. A literature review was conducted of electronic databases and relevant government, industry, and media websites between December 1, 2005, and January 31, 2011. Evidence selection was guided by the IOM LEAD principles (i.e., locate, evaluate, and assemble evidence to inform decisions) and five qualitative-research criteria, and it was validated by data and investigator triangulation. The investigators selected and categorized 117 data sources into two evidence tables used to evaluate industry progress (i.e., no, limited, moderate, and extensive). Food and beverage companies made moderate progress; however, limited progress was made by other industry subsectors. Industry stakeholders used integrated marketing communications (IMC) to promote primarily unhealthy products, which threaten children's and adolescents' health and miss opportunities to promote a healthy eating environment. Diverse industry stakeholders have several untapped opportunities to advance progress by promoting IMC to support a healthful diet; substantially strengthening self-regulatory programs; supporting truthful and non-misleading product labeling and health claims; engaging in partnerships; and funding independent evaluations of collective efforts. Copyright © 2011 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

NASA metric transition plan

NASA Technical Reports Server (NTRS)

1992-01-01

NASA science publications have used the metric system of measurement since 1970. Although NASA has maintained a metric use policy since 1979, practical constraints have restricted actual use of metric units. In 1988, an amendment to the Metric Conversion Act of 1975 required the Federal Government to adopt the metric system except where impractical. In response to Public Law 100-418 and Executive Order 12770, NASA revised its metric use policy and developed this Metric Transition Plan. NASA's goal is to use the metric system for program development and functional support activities to the greatest practical extent by the end of 1995. The introduction of the metric system into new flight programs will determine the pace of the metric transition. Transition of institutional capabilities and support functions will be phased to enable use of the metric system in flight program development and operations. Externally oriented elements of this plan will introduce and actively support use of the metric system in education, public information, and small business programs. The plan also establishes a procedure for evaluating and approving waivers and exceptions to the required use of the metric system for new programs. Coordination with other Federal agencies and departments (through the Interagency Council on Metric Policy) and industry (directly and through professional societies and interest groups) will identify sources of external support and minimize duplication of effort.

Electric Vehicle Site Operator Program

NASA Astrophysics Data System (ADS)

1992-05-01

Kansas State University, with funding support from federal, state, public, and private companies, is participating in the Department of Energy's Electric Vehicle Site Operator Program. Through participation is this program, Kansas State is demonstrating, testing, and evaluating electric or hybrid vehicle technology. This participation will provide organizations the opportunity to examine the latest EHV prototypes under actual operating conditions. KSU proposes to purchase one electric or hybrid van and four electric cars during the first two years of this five year program. KSU has purchased one G-Van built by Conceptor Industries, Toronto, Canada and has initiated a procurement order to purchase two Soleq 1992 Ford EVcort stationwagons.

Solar energy in California industry - Applications, characteristics and potential

NASA Technical Reports Server (NTRS)

Barbieri, R. H.; Pivirotto, D. S.

1978-01-01

Results of a survey to determine the potential applicability of solar thermal energy to industrial processes in California are presented. It is found that if the heat for all industrial processes at temperatures below 212 F were supplied by solar energy, total state energy consumption could be reduced by 100 trillion Btus (2%), while the use of solar energy in processes between 212 and 350 F could displace 500 trillion Btus. The issues and problems with which solar energy must contend are illustrated by a description of fluid milk processing operations. Solar energy application is found to be technically feasible for processes with thermal energy requirements below 212 F, with design, and degree of technical, economic and management feasibility being site specific. It is recommended that the state provide support for federal and industrial research, development and demonstration programs in order to stimulate acceptance of solar process heat application by industry.

Can industry afford solar energy

NASA Astrophysics Data System (ADS)

Kreith, F.; Bezdek, R.

1983-03-01

Falling oil prices and conservation measures have reduced the economic impetus to develop new energy sources, thus decreasing the urgency for bringing solar conversion technologies to commercial readiness at an early date. However, the capability for solar to deliver thermal energy for industrial uses is proven. A year-round operation would be three times as effective as home heating, which is necessary only part of the year. Flat plate, parabolic trough, and solar tower power plant demonstration projects, though uneconomically operated, have revealed engineering factors necessary for successful use of solar-derived heat for industrial applications. Areas of concern have been categorized as technology comparisons, load temperatures, plant size, location, end-use, backup requirements, and storage costs. Tax incentives have, however, supported home heating and not industrial uses, and government subsidies have historically gone to conventional energy sources. Tax credit programs which could lead to a 20% market penetration by solar energy in the industrial sector by the year 2000 are presented.

NASA airframe structural integrity program

NASA Technical Reports Server (NTRS)

Harris, Charles E.

1991-01-01

NASA has initiated a research program with the long-term objective of supporting the aerospace industry in addressing issues related to the aging commercial transport fleet. The interdisciplinary program combines advanced fatigue crack growth prediction methodology with innovative nondestructive examination technology with the focus on multi-site damage (MSD) at riveted connections. A fracture mechanics evaluation of the concept of pressure proof testing the fuselage to screen for MSD has been completed. Also, a successful laboratory demonstration of the ability of the thermal flux method to detect disbonds at riveted lap splice joints has been conducted. All long-term program elements have been initiated and the plans for the methodology verification program are being coordinated with the airframe manufacturers.

NASA airframe structural integrity program

NASA Technical Reports Server (NTRS)

Harris, Charles E.

1990-01-01

NASA initiated a research program with the long-term objective of supporting the aerospace industry in addressing issues related to the aging of the commercial transport fleet. The program combines advanced fatigue crack growth prediction methodology with innovative nondestructive examination technology with the focus on multi-stage damage (MSD) at rivited connections. A fracture mechanics evaluation of the concept of pressure proof testing the fuselage to screen for MSD was completed. A successful laboratory demonstration of the ability of the thermal flux method to detect disbonds at rivited lap splice joints was conducted. All long-term program elements were initiated, and the plans for the methodology verification program are being coordinated with the airframe manufacturers.

The Implementation of the Program Personnel Support

ERIC Educational Resources Information Center

Veynbender, Tatyana; Vershinina, Svetlana

2016-01-01

The article contains analysis software products used in the preparation of professionals through which they can realize themselves in this industry. The aim of the study is the analysis of personnel petroleum education in specialized university. The result is a sociological study on the question of the need and importance of personnel support…

Intergenerational Entrepreneurship in an Educational Setting.

ERIC Educational Resources Information Center

Owen, Melissa; Wright, Paul

Howe-To Industries is an intergenerational entrepreneurship project at the John de la Howe School, a state-supported institution for at-risk youth in rural McCormick County, South Carolina. Expansion of this type of program into public schools could engage the community and school system in a mutually beneficial relationship. John de la Howe…

Transcribe Your Class: Using Speech Recognition to Improve Access for At-Risk Students

ERIC Educational Resources Information Center

Bain, Keith; Lund-Lucas, Eunice; Stevens, Janice

2012-01-01

Through a project supported by Canada's Social Development Partnerships Program, a team of leading National Disability Organizations, universities, and industry partners are piloting a prototype Hosted Transcription Service that uses speech recognition to automatically create multimedia transcripts that can be used by students for study purposes.…

Comparison of Project Management Software Tool Use in Healthcare and Other Industries

ERIC Educational Resources Information Center

Tait, Isabelle E.

2013-01-01

Hospitals, clinics, and physicians' offices are being mandated to implement health information technology to support electronic health records or receive reduced government reimbursements for the treatment of Medicare and Medicaid patients. The EHR Medicare and Medicaid Incentive Program, managed by the Centers for Medicare and Medicaid Services,…

Environmental Assessment for Demolition and Construction of Military Personnel Support Facilities Kirtland Air Force Base, New Mexico

DTIC Science & Technology

2010-07-01

sound program are unclear. We should capitalize on the pool’s existing gover - nance, efficiency in operations and fiscal accountability stan- dards to...dollar eco- tourism industry. Maintaining the health of the river is critical to our future. Cooperative conservation efforts among government

Creating Jobs through Energy Efficiency Using Wisconsin's Successful Focus on Energy Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Akhtar, Masood; Corrigan, Edward; Reitter, Thomas

2012-03-30

The purpose of this project was to provide administrative and technical support for the completion of energy efficiency projects that reduce energy intensity and create or save Wisconsin industrial jobs. All projects have been completed. Details in the attached reports include project management, job development, and energy savings for each project.

Enhancing the Student Learning Experience in Software Engineering Project Courses

ERIC Educational Resources Information Center

Marques, Maira; Ochoa, Sergio F.; Bastarrica, Maria Cecilia; Gutierrez, Francisco J.

2018-01-01

Carrying out real-world software projects in their academic studies helps students to understand what they will face in industry, and to experience first-hand the challenges involved when working collaboratively. Most of the instructional strategies used to help students take advantage of these activities focus on supporting agile programming,…

Update to the Atlantic salmon breeding program at the National Cold Water Marine Aquaculture Center

USDA-ARS?s Scientific Manuscript database

The USDA-ARS National Cold Water Marine Aquaculture Center (NCWMAC) in Franklin, ME has been supporting the U.S. coldwater marine aquaculture industry for the past thirteen years by developing a genetically improved North American Atlantic salmon. The St. John's River stock was chosen as the focal ...

Conservation of strategic metals

NASA Technical Reports Server (NTRS)

Stephens, J. R.

1982-01-01

A long-range program in support of the aerospace industry aimed at reducing the use of strategic materials in gas turbine engines is discussed. The program, which is called COSAM (Conservation of Strategic Aerospace Materials), has three general objectives. The first objective is to contribute basic scientific understanding to the turbine engine technology bank so that our national security is not jeopardized if our strategic material supply lines are disrupted. The second objective is to help reduce the dependence of United States military and civilian gas turbine engines on worldwide supply and price fluctuations in regard to strategic materials. The third objective is, through research, to contribute to the United States position of preeminence in the world gas turbine engine markets by minimizing the acquisition costs and optimizing the performance of gas turbine engines. Three major research thrusts are planned: strategic element substitution; advanced processing concepts; and alternate material identification. Results from research and any required supporting technology will give industry the materials technology options it needs to make tradeoffs in material properties for critical components against the cost and availability impacts related to their strategic metal content.

Summary of NASA-Lewis Research Center solar heating and cooling and wind energy programs

NASA Technical Reports Server (NTRS)

Vernon, R. W.

1975-01-01

NASA is planning to construct and operate a solar heating and cooling system in conjunction with a new office building being constructed at Langley Research Center. The technology support for this project will be provided by a solar energy program underway at NASA's Lewis Research Center. The solar program at Lewis includes: testing of solar collectors with a solar simulator, outdoor testing of collectors, property measurements of selective and nonselective coatings for solar collectors, and a solar model-systems test loop. NASA-Lewis has been assisting the National Science Foundation and now the Energy Research and Development Administration in planning and executing a national wind energy program. The areas of the wind energy program that are being conducted by Lewis include: design and operation of a 100 kW experimental wind generator, industry-designed and user-operated wind generators in the range of 50 to 3000 kW, and supporting research and technology for large wind energy systems. An overview of these activities is provided.

NASA Electronic Parts and Packaging (NEPP) Program - Update

NASA Technical Reports Server (NTRS)

LaBel, Kenneth A.; Sampson, Michael J.

2010-01-01

This slide presentation reviews the goals and mission of the NASA Electronic Parts and Packaging (NEPP) Program. The NEPP mission is to provide guidance to NASA for the selection and application of microelectronics technologies, to improve understanding of the risks related to the use of these technologies in the space environment and to ensure that appropriate research is performed to meet NASA mission assurance needs. The program has been supporting NASA for over 20 years. The focus is on the reliability aspects of electronic devices. In this work the program also supports the electronics industry. There are several areas that the program is involved in: Memories, systems on a chip (SOCs), data conversion devices, power MOSFETS, power converters, scaled CMOS, capacitors, linear devices, fiber optics, and other electronics such as sensors, cryogenic and SiGe that are used in space systems. Each of these area are reviewed with the work that is being done in reliability and effects of radiation on these technologies.

Automatic control model of water filling system with Allen Bradley Micrologix 1400 PLC

NASA Astrophysics Data System (ADS)

Harahap, R.; Adyatma, AF; Fahmi, F.

2018-02-01

Programmable Logic Controller or PLC today plays an important role in most industrial control systems. PLC usage can be encountered in almost all fields of industry, not only in the manufacturing world but also on many other things such as elevators in office buildings, hotels hospitals, and others. PLC is an electronic control tool that operates in logic that its programming can be modified with relative ease. As with any controller in general, the PLC processes input signals to further discharge output according to the desired program. PLC usage is very broad because of its high reliability, can be reprogrammed or modified with relative ease, and very helpful in the tracking troubleshooting. One type of existing PLC is Allen Bradley PLC. Allen Bradley PLC program is commonly used in various industries. PLC Allen Bradley (AB) has several types, and one of them is the type of Micrologic 1400. In this study we design a system as a comparison with the conventional system. For that to explore the use of a PLC program which will be supported by a simulator tool, including a program to RSLogic 500, how to programming, monitoring via RSView32, and modification. It is expected to understand the application aspect of operation and programming of this specific PLC and its potential. The purpose of this research is to design water filling automation system by using Allen Bradley Micrologic 1400 type 1766-L32BXB PLC, empowering the use of Allen Bradley Micrologic 1400 PLC and to regulate the desired process to obtain efficiency and effectiveness compared with conventional system arrangement using Relay.

Small Business Innovations

NASA Technical Reports Server (NTRS)

1993-01-01

Under an Army Small Business Innovation Research (SBIR) grant, Symbiotics, Inc. developed a software system that permits users to upgrade products from standalone applications so they can communicate in a distributed computing environment. Under a subsequent NASA SBIR grant, Symbiotics added additional tools to the SOCIAL product to enable NASA to coordinate conventional systems for planning Shuttle launch support operations. Using SOCIAL, data may be shared among applications in a computer network even when the applications are written in different programming languages. The product was introduced to the commercial market in 1993 and is used to monitor and control equipment for operation support and to integrate financial networks. The SBIR program was established to increase small business participation in federal R&D activities and to transfer government research to industry. InQuisiX is a reuse library providing high performance classification, cataloging, searching, browsing, retrieval and synthesis capabilities. These form the foundation for software reuse, producing higher quality software at lower cost and in less time. Software Productivity Solutions, Inc. developed the technology under Small Business Innovation Research (SBIR) projects funded by NASA and the Army and is marketing InQuisiX in conjunction with Science Applications International Corporation (SAIC). The SBIR program was established to increase small business participation in federal R&D activities and to transfer government research to industry.

Exploring implementation of the 2010 Institute of Medicine’s Child and Adult Food Care Program recommendations for after-school snacks

PubMed Central

Nanney, Marilyn S; Glatt, Carissa

2012-01-01

Objective The aim of the present study was to explore the implementation of nutrition recommendations made in the 2010 Institute of Medicine (IOM) report, Child and Adult Care Food Program: Aligning Dietary Guidance for All, in school-based after-school snack programmes. Design A descriptive study. Setting One large suburban school district in Minneapolis, Minnesota, USA. Subjects None. Results Major challenges to implementation included limited access to product labelling and specifications inconsistent with the IOM’s Child and Adult Care Food Program (CACFP) recommendations, limited access to healthier foods due to current school district buying consortium agreement, and increased costs of wholegrain and lower-sodium foods and pre-packaged fruits and vegetables. Conclusions Opportunities for government and industry policy development and partnerships to support schools in their efforts to promote healthy after-school food environments remain. Several federal, state and industry leadership opportunities are proposed: provide product labelling that makes identifying snacks which comply with the 2010 IOM CACFP recommended standards easy; encourage compliance with recommendations by providing incentives to programmes; prioritize the implementation of paperwork and technology that simplifies enrolment and accountability systems; and provide support for food safety training and/or certification for non-food service personnel. PMID:22050891

Union women, the tobacco industry, and excise taxes: a lesson in unintended consequences.

PubMed

Balbach, Edith D; Campbell, Richard B

2009-08-01

Between 1987 and 1997, the tobacco industry used the issue of cigarette excise tax increases to create a political partnership with the Coalition of Labor Union Women (CLUW), a group representing female trade unionists in the U.S. This paper documents how the industry created this relationship and the lessons tobacco-control advocates can learn from the industry's example, in order to mitigate possible unintended consequences of advocating excise tax increases. In 1998, under the terms of the Master Settlement Agreement, the tobacco industry began making documents produced in litigation available publicly. Currently, approximately 50 million pages are available online, including substantial documentation of the industry-CLUW relationship. For this study, a comprehensive search of these documents was conducted. The tobacco industry encouraged CLUW's opposition to excise tax increases by emphasizing the economic regressivity of these taxes, discussing excise taxes generically to deflect attention from cigarettes, and encouraging opposition to earmarking cigarette taxes to pay for specific programs. In addition, CLUW received at least $221,500 in financial support between 1987 and 1997 and in-kind support for its conferences, membership materials, and other services. Excise tax increases, if pursued without considering the impacts they may have on low-SES populations, may have unintended consequences. In this case, such proposals may have helped to create a relationship between CLUW and the tobacco industry. Because excise taxes are endorsed in the Framework Convention on Tobacco Control, tobacco-control advocates must understand how to build relationships with low-SES populations and mitigate potential alliances with the tobacco industry.

Eliminating smoking in bars, restaurants, and gaming clubs in California: BREATH, the California Smoke-Free Bar Program.

PubMed

Kiser, D; Boschert, T

2001-01-01

On January 1, 1998, California became the first state in the country to prohibit indoor smoking in nightspots, bars, bar/restaurant combinations, bingo parlors, cardrooms, and casinos on a statewide basis. This paper describes the activities which achieved this result, based on a program with three main goals: Ease the transition for business owners; Activate public support for the law; Defeat tobacco industry efforts to undermine the law. Important lessons learned from this campaign are presented.

Metals and Ceramics Division progress report for period ending December 31, 1992

DOE Office of Scientific and Technical Information (OSTI.GOV)

Craig, D.F.; Weir, J.R. Jr.

1993-04-01

This report provides a brief overview of the activities and accomplishments of the division, whose purpose is to provide technical support, primarily in the area of high-temperature materials, for the various technologies being developed by US DOE. Activities range from basic research to industrial research and technology transfer. The division (and the report) is divided into the following: Engineering materials, high-temperature materials, materials science, ceramics, nuclear fuel materials, program activities, collaborative research facilities and technology transfer, and educational programs.

NASA presentation. [wind energy conversion systems planning

NASA Technical Reports Server (NTRS)

Thomas, R. L.

1973-01-01

The development of a wind energy system is outlined that supplies reliable energy at a cost competitive with other energy systems. A government directed industry program with strong university support is recommended that includes meteorological studies to estimate wind energy potentials and determines favorable regions and sites for wind power installations. Key phases of the overall program are wind energy conversion systems, meteorological wind studies, energy storage systems, and environmental impact studies. Performance testing with a prototype wind energy conversion and storage system is projected for Fiscal 1977.

Technology Opportunities to Reduce U.S. Greenhouse Gas Emissions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pena, Federico

1997-10-01

This report serves as the technology basis of a needed national climate change technology strategy, with the confidence that a strong technology R&D program will deliver a portfolio of technologies with the potential to provide very substantial greenhouse gas emission reductions along with continued economic growth. Much more is needed to define such a strategy, including identification of complementary deployment policies and analysis to support the seeping and prioritization of R&D programs. A national strategy must be based upon governmental, industrial, and academic partnerships.

NASA space station software standards issues

NASA Technical Reports Server (NTRS)

Tice, G. D., Jr.

1985-01-01

The selection and application of software standards present the NASA Space Station Program with the opportunity to serve as a pacesetter for the United States software in the area of software standards. The strengths and weaknesses of each of the NASA defined software standards issues are summerized and discussed. Several significant standards issues are offered for NASA consideration. A challenge is presented for the NASA Space Station Program to serve as a pacesetter for the U.S. Software Industry through: (1) Management commitment to software standards; (2) Overall program participation in software standards; and (3) Employment of the best available technology to support software standards

KSC-2011-7846

NASA Image and Video Library

2011-11-21

CAPE CANAVERAL, Fla. – Members of the media tour several facilities, including the Launch Equipment Test Facility in the Industrial Area, during the 21st Century Ground Systems Program Tour at Kennedy Space Center in Florida. Other tour stops were the Operations & Checkout Building, the Multi-Payload Processing Facility and the Canister Rotation Facility. NASA’s 21st Century Ground Systems Program was initiated at Kennedy Space Center to establish the needed launch and processing infrastructure to support the Space Launch System Program and to work toward transforming the landscape of the launch site for a multi-faceted user community. Photo credit: NASA/Jim Grossmann

KSC-2011-7847

NASA Image and Video Library

2011-11-21

CAPE CANAVERAL, Fla. – Members of the media tour several facilities, including the Launch Equipment Test Facility in the Industrial Area, during the 21st Century Ground Systems Program Tour at Kennedy Space Center in Florida. Other tour stops were the Operations & Checkout Building, the Multi-Payload Processing Facility and the Canister Rotation Facility. NASA’s 21st Century Ground Systems Program was initiated at Kennedy Space Center to establish the needed launch and processing infrastructure to support the Space Launch System Program and to work toward transforming the landscape of the launch site for a multi-faceted user community. Photo credit: NASA/Jim Grossmann

Migration of legacy mumps applications to relational database servers.

PubMed

O'Kane, K C

2001-07-01

An extended implementation of the Mumps language is described that facilitates vendor neutral migration of legacy Mumps applications to SQL-based relational database servers. Implemented as a compiler, this system translates Mumps programs to operating system independent, standard C code for subsequent compilation to fully stand-alone, binary executables. Added built-in functions and support modules extend the native hierarchical Mumps database with access to industry standard, networked, relational database management servers (RDBMS) thus freeing Mumps applications from dependence upon vendor specific, proprietary, unstandardized database models. Unlike Mumps systems that have added captive, proprietary RDMBS access, the programs generated by this development environment can be used with any RDBMS system that supports common network access protocols. Additional features include a built-in web server interface and the ability to interoperate directly with programs and functions written in other languages.

Status of the profession

NASA Technical Reports Server (NTRS)

Boyce, Peter B.; Beichman, Charles A.; Abt, Helmut A.; Bauer, Wendy Hagen; Burbidge, Geoffrey; Cochran, Anita L.; Dorfman, Robert; Harris, Hugh; Havlen, Robert; Jones, Christine

1991-01-01

The number of astronomers has grown by about 40 percent over the past decade. The number of astronomers with jobs in industry, or with long-term, non-tenured, jobs has increased dramatically compared with traditional faculty positions. The increase in the number of astronomers and the declining share of the NSF budget going to astronomy has led to extreme difficulties in the NSF grant program and in support of the National Observatories. In 1989, direct NASA support of astronomers through the grants program exceeds that of NSF, although the total of the NSF grants program over decade far exceeds that of NASA. Access to major new telescopes will be important issue for the 1990s. US astronomers, who once had a monopoly on telescopes larger than 3 meters, will, by the year 2000, have access to just half of the world's optical telescope area.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Green, D.W.; Heinrich, R.R.; Jensen, K.J.

Technical and administrative activities of the Analytical Chemistry Laboratory (ACL) are reported for fiscal year 1984. The ACL is a full-cost-recovery service center, with the primary mission of providing a broad range of technical support services to the scientific and engineering programs at ANL. In addition, ACL conducts a research program in analytical chemistry, works on instrumental and methods development, and provides analytical services for governmental, educational, and industrial organizations. The ACL is administratively within the Chemical Technology Division, the principal user, but provides technical support for all of the technical divisions and programs at ANL. The ACL has threemore » technical groups - Chemical Analysis, Instrumental Analysis, and Organic Analysis. Under technical activities 26 projects are briefly described. Under professional activities, a list is presented for publications and reports, oral presentations, awards and meetings attended. 6 figs., 2 tabs.« less

Industry/University Cooperative Programs. Proceedings of a Workshop Held in Conjunction with the Annual Meeting of the Council of Graduate Schools in the United States (20th, Las Vegas, Nevada, December 2, 1980).

ERIC Educational Resources Information Center

Council of Graduate Schools in the U.S., Washington, DC.

Proceedings of a 1980 workshop on industry/university cooperative programs are presented. Program presentations and authors include: "On Industry/Academia Relations" (T. Baron); "The MIT Liaison Program" (J. D. Bruce); "An Industrial Perspective of Academic Programs" (R. Fuller); "University/Industry Interactions…

Search for supporting methodologies - Or how to support SEI for 35 years

NASA Technical Reports Server (NTRS)

Handley, Thomas H., Jr.; Masline, Richard C.

1991-01-01

Concepts relevant to the development of an evolvable information management system are examined in terms of support for the Space Exploration Initiative. The issues of interoperability within NASA and industry initiatives are studied including the Open Systems Interconnection standard and the operating system of the Open Software Foundation. The requirements of partitioning functionality into separate areas are determined with attention given to the infrastructure required to ensure system-wide compliance. The need for a decision-making context is a key to the distributed implementation of the program, and this environment is concluded to be next step in developing an evolvable, interoperable, and securable support network.

Comparing the engineering program feeders from SiF and convention models

NASA Astrophysics Data System (ADS)

Roongruangsri, Warawaran; Moonpa, Niwat; Vuthijumnonk, Janyawat; Sangsuwan, Kampanart

2018-01-01

This research aims to compare the relationship between two types of engineering program feeder models within the technical education systems of Rajamangala University of Technology Lanna (RMUTL), Chiangmai, Thailand. To illustrate, the paper refers to two typologies of feeder models, which are the convention and the school in factory (SiF) models. The new SiF model is developed through a collaborative educational process between the sectors of industry, government and academia, using work-integrated learning. The research methodology were use to compared features of the the SiF model with conventional models in terms of learning outcome, funding budget for the study, the advantages and disadvantages from the point of view of students, professors, the university, government and industrial partners. The results of this research indicate that the developed SiF feeder model is the most pertinent ones as it meet the requirements of the university, the government and the industry. The SiF feeder model showed the ability to yield positive learning outcomes with low expenditures per student for both the family and the university. In parallel, the sharing of knowledge between university and industry became increasingly important in the process, which resulted in the improvement of industrial skills for professors and an increase in industrial based research for the university. The SiF feeder model meets its demand of public policy in supporting a skilled workforce for the industry, which could be an effective tool for the triple helix educational model of Thailand.

Signatures support program

NASA Astrophysics Data System (ADS)

Hawley, Chadwick T.

2009-05-01

The Signatures Support Program (SSP) leverages the full spectrum of signature-related activities (collections, processing, development, storage, maintenance, and dissemination) within the Department of Defense (DOD), the intelligence community (IC), other Federal agencies, and civil institutions. The Enterprise encompasses acoustic, seismic, radio frequency, infrared, radar, nuclear radiation, and electro-optical signatures. The SSP serves the war fighter, the IC, and civil institutions by supporting military operations, intelligence operations, homeland defense, disaster relief, acquisitions, and research and development. Data centers host and maintain signature holdings, collectively forming the national signatures pool. The geographically distributed organizations are the authoritative sources and repositories for signature data; the centers are responsible for data content and quality. The SSP proactively engages DOD, IC, other Federal entities, academia, and industry to locate signatures for inclusion in the distributed national signatures pool and provides world-wide 24/7 access via the SSP application.

Documenting the rationale and psychometric characteristics of patient reported outcomes for labeling and promotional claims: the PRO Evidence Dossier.

PubMed

Revicki, Dennis A; Gnanasakthy, Ari; Weinfurt, Kevin

2007-05-01

The Food and Drug Administration (FDA) and European Medicines Agency (EMEA) are willing to consider including information on patient reported outcomes (PROs) in product labeling and advertising. Pharmaceutical industry researchers must provide sufficient evidence supporting PRO benefit before an approval may be granted. This report describes the purpose and content of a PRO Evidence Dossier, which consists of important information supporting PRO claims. The dossier should be completed by pharmaceutical industry or other researchers to document the planning of the PRO assessment strategy, psychometric evidence, desired target labeling statements, and the clinical trial evidence of PRO benefits. The systematic reporting and documentation of information on the rationale for including PROs, rationale for the selection of specific PRO instruments, evidence on the psychometric qualities of the PRO measures, and guidelines for interpreting PRO findings will facilitate achieving a PRO labeling or promotional claim. Combining all the relevant information into a single document will facilitate the review and evaluation process for clinical and regulatory reviewers. The PRO Evidence Dossier may also be helpful to industry and academic researchers in identifying further information that will need to be developed to support the clinical development program and the PRO endpoints.

A Summary of the Naval Postgraduate School Research Program and Recent Publications, October 1988 to September 1989

DTIC Science & Technology

1990-08-30

Monterey, CA 93943 v TABLE OF CONTENTS DEPARTMENT OF AERONAUTICS AND ASTRONAUTICS R.E. Ball NPS Survivability Support 5 DJ. Collins Control System Design ...Quality R. Evered Design and Evaluation of Management System for 26 J.G. San Miguel Naval Industrial Improvement B. Frew Data Communication Support 26 W.R...Research 28 M. Zviran Designs for Casual Interference viii W.J. Hagan Cognitive Passwords 29 M. Zviran J.D. Husley D.R. Henderson An Economic Analysis of

Upgrading the Center for Lightweighting Automotive Materials and Processing - a GATE Center of Excellence at the University of Michigan-Dearborn

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mallick, P. K.

2012-08-30

The Center for Lightweighting Materials and Processing (CLAMP) was established in September 1998 with a grant from the Department of Energy’s Graduate Automotive Technology Education (GATE) program. The center received the second round of GATE grant in 2005 under the title “Upgrading the Center for Lightweighting Automotive Materials and Processing”. Using the two grants, the Center has successfully created 10 graduate level courses on lightweight automotive materials, integrated them into master’s and PhD programs in Automotive Systems Engineering, and offered them regularly to the graduate students in the program. In addition, the Center has created a web-based lightweight automotive materialsmore » database, conducted research on lightweight automotive materials and organized seminars/symposia on lightweight automotive materials for both academia and industry. The faculty involved with the Center has conducted research on a variety of topics related to design, testing, characterization and processing of lightweight materials for automotive applications and have received numerous research grants from automotive companies and government agencies to support their research. The materials considered included advanced steels, light alloys (aluminum, magnesium and titanium) and fiber reinforced polymer composites. In some of these research projects, CLAMP faculty have collaborated with industry partners and students have used the research facilities at industry locations. The specific objectives of the project during the current funding period (2005 – 2012) were as follows: (1) develop new graduate courses and incorporate them in the automotive systems engineering curriculum (2) improve and update two existing courses on automotive materials and processing (3) upgrade the laboratory facilities used by graduate students to conduct research (4) expand the Lightweight Automotive Materials Database to include additional materials, design case studies and make it more accessible to outside users (5) provide support to graduate students for conducting research on lightweight automotive materials and structures (6) provide industry/university interaction through a graduate certificate program on automotive materials and technology idea exchange through focused seminars and symposia on automotive materials.« less

Healthcare Industry Injuries by Patient Contact Status in Kentucky, 2012-2014.

PubMed

Ranzenberger, Kristen; Bunn, Terry L; Slavova, Svetla

2016-10-01

The healthcare industry continues to have a high number of reported injuries. The purpose of this study was to characterize healthcare industry injuries by patient contact status, identify the occupations associated with healthcare injuries by patient contact status, and determine healthcare injury rates by occupation to gain a better understanding of healthcare industry-compensated injuries and better target safety practices and programs in the healthcare industry. Kentucky healthcare industry workers' compensation first reports of injuries from calendar years 2012-2014 were categorized into injuries involved in direct patient contact versus injuries without direct patient contact using narrative text analysis. Injury numbers and rates were calculated for a number of data variables. Healthcare injuries without direct patient contact (55% of all first reports of injuries) occurred more frequently among older workers (45 years old and older [51%]), in "other" occupations such as housekeeping and maintenance (28%), and as a result of falls/slips/trips (39%) and sprains/tears (38%). In contrast, a higher percentage of healthcare injuries involving direct patient contact occurred among workers younger than 35 years (48%), in healthcare support occupations (50%), and resulting from sprains/tears (66%) and lifting/handling (52%), compared with those without direct patient contact. Findings from this study can better target the need for new and/or additional specific workplace safety training, especially in the healthcare support and nursing occupations with and without patient contact.

Status and Outlook for the U.S. Non-Automotive Fuel Cell Industry: Impacts of Government Policies and Assessment of Future Opportunities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Greene, David L; Duleep, K. G.; Upreti, Girish

Fuel cells (FCs) are considered essential future energy technologies by developed and developing economies alike. Several countries, including the United States, Japan, Germany, and South Korea have established publicly funded R&D and market transformation programs to develop viable domestic FC industries for both automotive and non-automotive applications. Important non-automotive applications include large scale and small scale distributed combined heat and electrical power, backup and uninterruptible power, material handling and auxiliary power units. The U.S. FC industry is in the early stages of development, and is working to establish sustainable markets in all these areas. To be successful, manufacturers must reducemore » costs, improve performance, and overcome market barriers to new technologies. U.S. policies are assisting via research and development, tax credits and government-only and government-assisted procurements. Over the past three years, the industry has made remarkable progress, bringing both stack and system costs down by more than a factor of two while improving durability and efficiency, thanks in part to government support. Today, FCs are still not yet able to compete in these markets without continued policy support. However, continuation or enhancement of current policies, such as the investment tax credit and government procurements, together with continued progress by the industry, appears likely to establish a viable domestic industry within the next decade.« less

X-ray techniques for innovation in industry

PubMed Central

Lawniczak-Jablonska, Krystyna; Cutler, Jeffrey

2014-01-01

The smart specialization declared in the European program Horizon 2020, and the increasing cooperation between research and development found in companies and researchers at universities and research institutions have created a new paradigm where many calls for proposals require participation and funding from public and private entities. This has created a unique opportunity for large-scale facilities, such as synchrotron research laboratories, to participate in and support applied research programs. Scientific staff at synchrotron facilities have developed many advanced tools that make optimal use of the characteristics of the light generated by the storage ring. These tools have been exceptionally valuable for materials characterization including X-ray absorption spectroscopy, diffraction, tomography and scattering, and have been key in solving many research and development issues. Progress in optics and detectors, as well as a large effort put into the improvement of data analysis codes, have resulted in the development of reliable and reproducible procedures for materials characterization. Research with photons has contributed to the development of a wide variety of products such as plastics, cosmetics, chemicals, building materials, packaging materials and pharma. In this review, a few examples are highlighted of successful cooperation leading to solutions of a variety of industrial technological problems which have been exploited by industry including lessons learned from the Science Link project, supported by the European Commission, as a new approach to increase the number of commercial users at large-scale research infrastructures. PMID:25485139

Starting participation in an employee fitness program: attitudes, social influence, and self-efficacy.

PubMed

Lechner, L; De Vries, H

1995-11-01

This article presents a study of the determinants of starting participation in an employee fitness program. Information from 488 employees, recruited from two worksites, was obtained. From these employees the determinants of participation were studied. A questionnaire based on two theoretical models was used. The Stages of Change model was used to measure the health behavior, consisting of precontemplation (no intention to participate), contemplation (considering participation), preparation (intending to participate within a short period), and action (participating in fitness). The possible determinants were measured according to the ASE model, including the attitude toward an employee fitness program, social influence, and self-efficacy expectations. Subjects in action stage were most convinced of the benefits of participation in the employee fitness program and of their own skills to participate in a fitness program. Subjects in precontemplation stage were least convinced of the advantages of participation and had the lowest self-efficacy scores. Subjects in action stage experienced the most social support to participate in the employee fitness program. Health education for employees within industrial fitness programs can be tailored toward their motivational stage. Promotional activities for industrial fitness programs should concentrate on persons in the precontemplation and contemplation stages, since people in these stages are insufficiently convinced of the advantages of a fitness program and expect many problems with regard to their ability to participate in the program.

Common Analysis Tool Being Developed for Aeropropulsion: The National Cycle Program Within the Numerical Propulsion System Simulation Environment

NASA Technical Reports Server (NTRS)

Follen, Gregory J.; Naiman, Cynthia G.

1999-01-01

The NASA Lewis Research Center is developing an environment for analyzing and designing aircraft engines-the Numerical Propulsion System Simulation (NPSS). NPSS will integrate multiple disciplines, such as aerodynamics, structure, and heat transfer, and will make use of numerical "zooming" on component codes. Zooming is the coupling of analyses at various levels of detail. NPSS uses the latest computing and communication technologies to capture complex physical processes in a timely, cost-effective manner. The vision of NPSS is to create a "numerical test cell" enabling full engine simulations overnight on cost-effective computing platforms. Through the NASA/Industry Cooperative Effort agreement, NASA Lewis and industry partners are developing a new engine simulation called the National Cycle Program (NCP). NCP, which is the first step toward NPSS and is its initial framework, supports the aerothermodynamic system simulation process for the full life cycle of an engine. U.S. aircraft and airframe companies recognize NCP as the future industry standard common analysis tool for aeropropulsion system modeling. The estimated potential payoff for NCP is a $50 million/yr savings to industry through improved engineering productivity.

The future of the US Space Industrial Base

NASA Astrophysics Data System (ADS)

1992-11-01

Our space industrial base has given the United States the capability to be the world's leading space-faring nation. We have exploited space to greatly advance our national security by using extraordinarily sophisticated reconnaissance space systems to guard against military surprise, and other spacecraft that support the pinpoint delivery of weapons. We have fulfilled the dreams of those visionary national leaders who enacted the first National Aeronautics and Space Act by advancing our scientific knowledge of the planet we occupy and the universe around us. And the advancements in technology engendered by the U.S. space program have had world-wide impact in fostering entire new industries. The industrial base is broad. It is not merely plant and equipment, but an entire infrastructure of skilled scientific and technical manpower backed up by superb government, private and academic facilities and institutions.

Developing and fostering a dynamic program for training in veterinary pathology and clinical pathology: veterinary students to post-graduate education.

PubMed

Lairmore, Michael D; Oglesbee, Michael; Weisbrode, Steve E; Wellman, Maxey; Rosol, Thomas; Stromberg, Paul

2007-01-01

Recent reports project a deficiency of veterinary pathologists, indicating a need to train highly qualified veterinary pathologists, particularly in academic veterinary medicine. The need to provide high-quality research training for veterinary pathologists has been recognized by the veterinary pathology training program of the Ohio State University (OSU) since its inception. The OSU program incorporates elements of both residency training and graduate education into a unified program. This review illustrates the components and structure of the training program and reflects on future challenges in training veterinary pathologists. Key elements of the OSU program include an experienced faculty, dedicated staff, and high-quality students who have a sense of common mission. The program is supported through cultural and infrastructure support. Financial compensation, limited research funding, and attractive work environments, including work-life balance, will undoubtedly continue to be forces in the marketplace for veterinary pathologists. To remain competitive and to expand the ability to train veterinary pathologists with research skills, programs must support strong faculty members, provide appropriate infrastructure support, and seek active partnerships with private industry to expand program opportunities. Shortages of trained faculty may be partially resolved by regional cooperation to share faculty expertise or through the use of communications technology to bridge distances between programs. To foster continued interest in academic careers, training programs will need to continue to evolve and respond to trainees' needs while maintaining strong allegiances to high-quality pathology training. Work-life balance, collegial environments that foster a culture of respect for veterinary pathology, and continued efforts to reach out to veterinary students to provide opportunities to learn about the diverse careers offered in veterinary pathology will pay long-term dividends for the future of the profession.

Developing and Fostering a Dynamic Program for Training in Veterinary Pathology and Clinical Pathology: Veterinary Students to Post-graduate Education

PubMed Central

Lairmore, Michael D.; Oglesbee, Michael; Weisbrode, Steve E.; Wellman, Maxey; Rosol, Thomas; Stromberg, Paul

2011-01-01

Recent reports project a deficiency of veterinary pathologists, indicating a need to train highly qualified veterinary pathologists, particularly in academic veterinary medicine. The need to provide high-quality research training for veterinary pathologists has been recognized by the veterinary pathology training program of the Ohio State University (OSU) since its inception. The OSU program incorporates elements of both residency training and graduate education into a unified program. This review illustrates the components and structure of the training program and reflects on future challenges in training veterinary pathologists. Key elements of the OSU program include an experienced faculty, dedicated staff, and high-quality students who have a sense of common mission. The program is supported through cultural and infrastructure support. Financial compensation, limited research funding, and attractive work environments, including work–life balance, will undoubtedly continue to be forces in the marketplace for veterinary pathologists. To remain competitive and to expand the ability to train veterinary pathologists with research skills, programs must support strong faculty members, provide appropriate infrastructure support, and seek active partnerships with private industry to expand program opportunities. Shortages of trained faculty may be partially resolved by regional cooperation to share faculty expertise or through the use of communications technology to bridge distances between programs. To foster continued interest in academic careers, training programs will need to continue to evolve and respond to trainees' needs while maintaining strong allegiances to high-quality pathology training. Work–life balance, collegial environments that foster a culture of respect for veterinary pathology, and continued efforts to reach out to veterinary students to provide opportunities to learn about the diverse careers offered in veterinary pathology will pay long-term dividends for the future of the profession. PMID:18287474

Tools Automate Spacecraft Testing, Operation

NASA Technical Reports Server (NTRS)

2010-01-01

"NASA began the Small Explorer (SMEX) program to develop spacecraft to advance astrophysics and space physics. As one of the entities supporting software development at Goddard Space Flight Center, the Hammers Company Inc. (tHC Inc.), of Greenbelt, Maryland, developed the Integrated Test and Operations System to support SMEX. Later, the company received additional Small Business Innovation Research (SBIR) funding from Goddard for a tool to facilitate the development of flight software called VirtualSat. NASA uses the tools to support 15 satellites, and the aerospace industry is using them to develop science instruments, spacecraft computer systems, and navigation and control software."

American Academy of Neurology policy on pharmaceutical and device industry support.

PubMed

Hutchins, J C; Rydell, C M; Griggs, R C; Sagsveen, M; Bernat, J L

2012-03-06

To examine the American Academy of Neurology (AAN)'s prevention and limitation of conflicts of interest (COI) related to relationships with pharmaceutical and medical device manufacturers and other medically related commercial product and service companies (industry). We reviewed the AAN's polices governing its interactions with industry, mechanisms for enforcement, and the recent findings of the board-appointed COI task force, in the context of the 2009 David Rothman and colleagues' article in JAMA, the Council of Medical Specialty Societies (CMSS) Code for Interactions with Companies (Code), efforts of the American Medical Association in this area, and increased public and Congressional scrutiny of physician/physician organizations' relationships with industry. The AAN's Policy on Conflicts of Interest provides 4 mechanisms for addressing COI: avoidance, separation, disclosure, and regulation. The AAN's Principles Governing Academy Relationships with External Sources of Support, including recent amendments proposed by the COI task force, regulate industry interaction with AAN programming, products, and leadership. With the Policy, Principles, and other methods of COI prevention, the AAN meets or exceeds all recommendations of the CMSS Code. With its adherence to the Principles since 2004, the AAN has been a leader among professional medical associations in appropriately managing COI related to interactions with industry. Recent amendments to the Principles maintain the AAN's position as a leader in a time of increased public scrutiny of physicians' and professional medical associations' relationships with industry. The AAN is responsive to the recommendations of the COI task force, and has adopted the CMSS Code.

Industry-Based Bilingual Vocational Training. A Directory of Industry-Based Training Programs for LEP Adults.

ERIC Educational Resources Information Center

Thomas, Robert J.; Rhodes, Paula

The purposes of this directory of existing industry-based training programs--for limited English-proficient (LEP) adults employed in those industries--are as follows: (1) to provide a sense of the types of existing industry-based programs available to LEP employees; (2) to identify programs with the potential of implementing bilingual vocational…

SACD's Support of the Hyper-X Program

NASA Technical Reports Server (NTRS)

Robinson, Jeffrey S.; Martin, John G.

2006-01-01

NASA s highly successful Hyper-X program demonstrated numerous hypersonic air-breathing vehicle related technologies including scramjet performance, advanced materials and hot structures, GN&C, and integrated vehicle performance resulting in, for the first time ever, acceleration of a vehicle powered by a scramjet engine. The Systems Analysis and Concepts Directorate (SACD) at NASA s Langley Research Center played a major role in the integrated team providing critical support, analysis, and leadership to the Hyper-X Program throughout the program s entire life and were key to its ultimate success. Engineers in SACD s Vehicle Analysis Branch (VAB) were involved in all stages and aspects of the program, from conceptual design prior to contract award, through preliminary design and hardware development, and in to, during, and after each of the three flights. Working closely with other engineers at Langley and Dryden, as well as industry partners, roughly 20 members of SACD were involved throughout the evolution of the Hyper-X program in nearly all disciplines, including lead roles in several areas. Engineers from VAB led the aerodynamic database development, the propulsion database development, and the stage separation analysis and database development effort. Others played major roles in structures, aerothermal, GN&C, trajectory analysis and flight simulation, as well as providing CFD support for aerodynamic, propulsion, and aerothermal analysis.

RASSP final technical report

NASA Astrophysics Data System (ADS)

1992-10-01

The overall objective of the DARPA/Tri-Service RASSP program is to demonstrate a capability to rapidly specify, produce, and yield domain-specific, affordable signal processors for use in Department of Defense systems such as automatic target acquisition, tracking, and recognition, electronic countermeasures, communications, and SIGINT. The objective of the study phase is to specify a recommended program plan for the government to use as a template for procurement of the RASSP design system and demonstration program. To accomplish that objective, the study phase program tasks are to specify a development methodology for signal processors (adaptable to various organizational design styles, and application areas), analyze the requirements in CAD/CAE tools to support the development methodology, identify the state and development plans of the industry relative to this area, and to recommend the additional developments not currently being addressed by the industry, which are recommended as RASSP developments. In addition, the RASSP study phase will define a linking approach for electronically linking design centers to manufacturing centers so a complete cycle for prototyping can be accomplished with significantly reduced cycle time.

The NASA-JPL advanced propulsion program

NASA Technical Reports Server (NTRS)

Frisbee, Robert H.

1994-01-01

The NASA Advanced Propulsion Concepts (APC) program at the Jet Propulsion Laboratory (JPL) consists of two main areas: The first involves cooperative modeling and research activities between JPL and various universities and industry; the second involves research at universities and industry that is directly supported by JPL. The cooperative research program consists of mission studies, research and development of ion engine technology using C-60 (Buckminsterfullerene) propellant, and research and development of lithium-propellant Lorentz-force accelerator (LFA) engine technology. The university/industry- supported research includes research (modeling and proof-of-concept experiments) in advanced, long-life electric propulsion, and in fusion propulsion. These propulsion concepts were selected primarily to cover a range of applications from near-term to far-term missions. For example, the long-lived pulsed-xenon thruster research that JPL is supporting at Princeton University addresses the near-term need for efficient, long-life attitude control and station-keeping propulsion for Earth-orbiting spacecraft. The C-60-propellant ion engine has the potential for good efficiency in a relatively low specific impulse (Isp) range (10,000 - 30,000 m/s) that is optimum for relatively fast (less than 100 day) cis-lunar (LEO/GEO/Lunar) missions employing near-term, high-specific mass electric propulsion vehicles. Research and modeling on the C-60-ion engine are currently being performed by JPL (engine demonstration), Caltech (C-60 properties), MIT (plume modeling), and USC (diagnostics). The Li-propellant LFA engine also has good efficiency in the modest Isp range (40,000 - 50,000 m/s) that is optimum for near-to-mid-term megawatt-class solar- and nuclear-electric propulsion vehicles used for Mars missions transporting cargo (in support of a piloted mission). Research and modeling on the Li-LFA engine are currently being performed by JPL (cathode development), Moscow Aviation Institute (engine testing), Thermacore (electrode development), as well as at MIT (plume modeling), and USC (diagnostics). Also, the mission performance of a nuclear-electric propulsion (NEP) Li-LFA Mars cargo vehicle is being modeled by JPL (mission analysis; thruster and power processor modeling) and the Rocketdyne Energy Technology and Engineering Center (ETEC) (power system modeling). Finally, the fusion propulsion research activities that JPL is supporting at Pennsylvania State University (PSU) and at Lawrenceville Plasma Physics (LPP) are aimed at far-term fast (less than 100 day round trip) piloted Mars missions and, in the very far term, interstellar missions.

Postdoctoral pharmacy industry fellowships: a descriptive analysis of programs and postgraduate positions.

PubMed

Melillo, Stephanie; Gangadharan, Amy; Johnson, Hiliary; Schleck, Patrick; Steinberg, Michael; Alexander, James G

2012-01-01

Postdoctoral pharmacy industry fellowship programs and the employment of fellowship graduates are described. A list of postgraduate industry fellowships was gathered from the 2009 ASHP Midyear Clinical Meeting. Data regarding program characteristics were collected using the Personnel Placement Service database and program-specific brochures. After data compilation, a standardized survey was sent in January 2010 via e-mail to the point of contact for all programs to confirm the accuracy of the program's characteristics. Only academically affiliated industry fellowship programs were analyzed. Retrospective data were collected regarding the first position of employment for all fellows who graduated from the program between 2005 and 2009 and the position of those same individuals at the time of survey completion. Surveys were sent to 64 postgraduate industry fellowship programs affiliated with a school of pharmacy, 56 (87.5%) of whom responded. The departmental breakdown for positions offered (n = 75) across all academically affiliated industry fellowship programs (including nonresponders) was as follows: medical affairs (38.7%, n = 29), clinical research (32.0%, n = 24), regulatory affairs (9.3%, n = 7), commercial (8.0%, n = 6), health economics and outcomes research (8.0%, n = 6), and pharmacovigilance (4.0%, n = 3). Data from fellows during years 1-5 after completion of the industry fellowship indicated that 90.5% of former fellows remained in the industry (n = 238). The postgraduate industry fellowship programs surveyed indicated that the majority of fellowship graduates continued to hold positions in industry after program completion. The majority of industry fellowships and subsequent job placements occurred in the areas of medical affairs, clinical research, and regulatory affairs.

Higher Education Reform in South Korea: Perspectives on the New University for Regional Innovation Program

ERIC Educational Resources Information Center

Choi, Sheena; Yeom, Minho

2010-01-01

The New University for Regional Innovation (NURI) is one of the South Korean Ministry of Education and Human Resources Development's key projects supporting regional universities. NURI aims to develop areas of specialization in regional universities and link universities to local industries. In 2004, the South Korean government pledged to invest…

Advisory Boards: Gateway to Business Engagement

ERIC Educational Resources Information Center

Meeder, Hans; Pawlowski, Brett

2012-01-01

Interest has been growing in how to build or manage an effective business advisory board. Developing an advisory board is crucial to keeping CTE programs relevant and viable by engaging the support of business and industry. This article delves into how to build and manage a board, and how to re-energize boards that already exist but may be lacking.

National Institutes of Health Presentation at IPE Conference Program

NASA Technical Reports Server (NTRS)

Holloway, Caroline

1992-01-01

The conference objective was to set up a working dialogue among representatives from industry and various Federal agencies. Discussed here are present National Institutes of Health (NIH) support in the area of intelligent processing equipment (IPE) and how researchers can work together on future research objectives. Information is given in viewgraph form with accompanying comments.

Space station needs, attributes and architectural options. Volume 3, task 1: Mission requirements

NASA Technical Reports Server (NTRS)

1983-01-01

The mission requirements of the space station program are investigated. Mission parameters are divided into user support from private industry, scientific experimentation, U.S. national security, and space operations away from the space station. These categories define the design and use of the space station. An analysis of cost estimates is included.

National workshop on forest productivity & technology: cooperative research to support a sustainable & competitive future - progress and strategy

Treesearch

Eric D. Vance

2010-01-01

The Agenda 2020 Program is a partnership among government agencies, the forest products industry, and academia to develop technology capable of enhancing forest productivity, sustaining environmental values, increasing energy efficiency, and improving the economic competitiveness of the United States forest sector. In November 2006, the USDA Forest Service, in...

An Investigation of the Effectiveness of Four-Year Industrial Technology Programs In Preparing Industrial Electronic Technicians to Meet the Requirements of Industry.

ERIC Educational Resources Information Center

Prewitt, Roger W.

To determine the effectiveness of the 4-year industrial technology programs in preparing industrial electronic technicians for employment in industry, data were obtained through an opinionnaire, which was sent to the higher education institutions offering a 4-year electronic technician program and to selected industrial representatives located in…

Renewable energy for productive uses in Mexico

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hanley, C.

1997-12-01

This paper describes a USAID/USDOE sponsored program to implement renewable energy in Mexico for productive uses. The objectives are to expand markets for US and Mexican industries, and to combat global climate change - primarily greenhouse gas emissions. The focus is on off-grid applications, with an emphasis on developing the institution structure to support the development of these industries within the country. Agricultural development is an example of the type of industry approached, where photovoltaic and wind power can be used for water pumping. There are hundreds of projects under review, and this interest has put renewables as a linemore » item in Mexico`s rural development budget. Village power projects are being considered in the form of utility partnerships.« less

Role of the state in solving the environmental problems of the industrial monoprofile cities

NASA Astrophysics Data System (ADS)

Musina, L. M.; Neucheva, M. U.

2018-01-01

Nowadays the problem of sustainable socio-economic development of monotowns refers to one of the priority issues of the state policy. The author analyzes monotowns state policy support in Russia with main focus on programs aimed at ecological restoration of industrial monoprofile cities. The processes of program control in monotowns within the state economic policy are analyzed. In order to evaluate the results of programs (of city-forming enterprises and monotowns level) the principles of development of criteria development system have been substantiated. The environmental situation of monotowns depends on a complex system of interaction between the city (represented by its people and municipal authorities), private capital and the state. Long-term sustainable development of monotowns requires the interests of all three parties to be in balance. This is possible to achieve by increasing the social responsibility of businesses, increasing the development of local government and urban identity and active influence of local communities on the activities of the municipal authorities.

STEM for Females goes from a Ripple to a Wave

NASA Astrophysics Data System (ADS)

Roy, Rita

2015-11-01

At the 2015 World Conference of Science Journalists in Seoul on June 9, 2015 Nobel Prize Winner Sir Tim Hunt gave a speech with remarks which offended females in science around the world. Following the social media reaction several STEM education foundation for girls received justified attention. Programs are being supported for the education of girls and women around the world and they are gaining media attention. I will discuss the growing popularity and availability of all-girl science programs. These eager-to-learn young females are preparing themselves for serious careers in the hopes that their generation will close the gender gap. I will present a statistical analysis of workplace gender equality in professional STEM environments, including a focus on select fluid dynamics corporations, which will show that there is room for improvement across the industry. The goal of this presentation is to endorse and promote the ever-growing wave of qualified female applicants to graduate programs and industrial job placements.

78 FR 20355 - Notice of Availability of Funds and Solicitation for Grant Applications for Face Forward-Serving...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-04

...The U.S. Department of Labor (we, the Department or DOL) Employment and Training Administration (ETA), announces the availability of approximately $26 million in grant funds authorized by the Workforce Investment Act. Under this solicitation, DOL expects to award 26 grants for up to $1,000,000 each to cover a 39-month period of performance, which includes a planning period of up to six months, program operation period of 24 months, and a minimum of nine months of post program support and follow-up services provided to each participant. Any non- profit organization with IRS 501(c)(3) status, unit of state or local government, or any Indian and Native American entity eligible for grants under WIA Section 166, may apply for these grants to provide services to eligible participants in areas with high-poverty and high- crime rates. These services will include diversion and/or expungement (required for all participants), case management, mentoring, education, training leading to industry-recognized credentials for in demand industries and occupations in the State or local area, service- learning, workforce activities, and post-program support and follow-up services. The complete SGA and any subsequent SGA amendments in connection with this solicitation are described in further detail on ETA's Web site at http://www.doleta.gov/grants/ or on http://www.grants.gov. The Web sites provide application information, eligibility requirements, review and selection procedures, and other program requirements governing this solicitation.

An Introduction to Intelligent Processing Programs Developed by the Air Force Manufacturing Technology Directorate

NASA Technical Reports Server (NTRS)

Sampson, Paul G.; Sny, Linda C.

1992-01-01

The Air Force has numerous on-going manufacturing and integration development programs (machine tools, composites, metals, assembly, and electronics) which are instrumental in improving productivity in the aerospace industry, but more importantly, have identified strategies and technologies required for the integration of advanced processing equipment. An introduction to four current Air Force Manufacturing Technology Directorate (ManTech) manufacturing areas is provided. Research is being carried out in the following areas: (1) machining initiatives for aerospace subcontractors which provide for advanced technology and innovative manufacturing strategies to increase the capabilities of small shops; (2) innovative approaches to advance machine tool products and manufacturing processes; (3) innovative approaches to advance sensors for process control in machine tools; and (4) efforts currently underway to develop, with the support of industry, the Next Generation Workstation/Machine Controller (Low-End Controller Task).

The NSF/RANN FY 1975 program for geothermal resources research and technology

NASA Technical Reports Server (NTRS)

Kruger, P.

1974-01-01

The specific goal of the NSF geothermal program is the rapid development by industry of the nation's geothermal resources that can be demonstrated to be commercially, environmentally and socially acceptable as alternate energy sources. NSF, as the lead agency for the federal geothermal energy research program, is expediting a program which encompasses the objectives necessary for significant utilization. These include: acceleration of exploration and assessment methods to identify commercial geothermal resources; development of innovative and improved technology to achieve economic feasibility; evaluation of policy options to resolve environmental, legal, and institutional problems; and support of experimental research facilities for each type of geothermal resource. Specific projects in each of these four objective areas are part of the NSF program for fiscal year 1975.

76 FR 52958 - Draft Guidance for Industry on Neglected Tropical Diseases of the Developing World: Developing...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-24

...The Food and Drug Administration (FDA) is announcing the availability of a draft guidance for industry entitled ``Neglected Tropical Diseases of the Developing World: Developing Drugs for Treatment or Prevention.'' The purpose of this guidance is to assist sponsors in the clinical development of drugs for the treatment or prevention of neglected diseases of the developing world. Specifically, this guidance addresses FDA's current thinking regarding the overall drug development program for the treatment or prevention of neglected tropical diseases (NTDs), including clinical trial designs and internal review standards to support approval of drugs.

Proceedings: Nozzle Initiative Industry Advisory Committee on standardization of carbon-phenolic test methods and specifications

NASA Technical Reports Server (NTRS)

Hall, William B.

1992-01-01

Verbal discussions during the biannual meeting of the Industry Advisory Committee for Carbon-phenolic constituent test methodology, which is constituted under the Solid Propulsion Integrity Program (SPIP), are addressed. The items on the agenda are: (1) NASA video tape library; (2) product code identification; (3) NMR progress; (4) IR and DMTA workshop; (5) aerospace database update; (6) M vision database demonstration; (7) constituent fingerprinting; (8) cured materials test development; (9) engineering needs for computer modeling; and (10) review action items. The materials prepared to support some of the oral presentations are also included in the Appendix.

Developing Entrepreneurial and Technology Commercialization Policies to Promote Cooperative Ventures Between NIH and Industry

NASA Astrophysics Data System (ADS)

Rossomando, Edward F.

2001-03-01

The NIH has had a great influence in guiding the biological research agenda for the last half of the 20th century. This may change if the increases in research funding from the private sector that occurred in the last ten years continue into the 21st century. Ten years ago, industry supplied 55% of the US R&D funds. In 2000, industry support of R&D had increased to 76%, with industry carrying out 70% of the nations applied and 91% of its development research. Given this shift, one of the biggest challenges that NIH may face in coming years is sharing control of America's research agenda with industry. For this to occur policies that encourage cooperative ventures with industry are needed. In a unique experiment, I was invited to the National Institute of Dental and Craniofacial Research (NIDCR), one of the 25 NIH Institutes and Centers, to develop programs and policies that would promote interactions with industry. This talk will introduce the strategy and programs developed to commercialize products and technologies from basic science discoveries and introducing an entrepreneurial atmosphere within the Institute. The results of this experiment will be discussed by comparing differences between discovery-driven and customer-driven innovation. One outcome of this experience is a greater appreciation of the obstacles to introducing disruptive technologies into the market place and of the paradigms that serve as barriers to commercialization. One recommendation is that the NIDCR consider a policy that allows for some participation by industry in setting the research and training agenda of the Institute, and that a mechanism for industry input be introduced into its administrative organization.

Summary of DOE/PERF water program review.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Veil, J.; Gasper, J.; Puder, M.

2006-01-31

For many years, the U.S. Department of Energy (DOE) has supported and sponsored various types of water research relating to the oil and gas industry through its Office of Fossil Energy and its National Energy Technology Laboratory (NETL). In early 2005, the Petroleum Environmental Research Forum (PERF) submitted a proposal to DOE for funding an upcoming PERF meeting that would feature water research in the petroleum industry. PERF is a nonprofit organization created in 1986 to provide a stimulus to and a forum for the collection, exchange, and analysis of research information related to the development of technology concerning themore » petroleum industry, and a mechanism for establishing joint research projects in that field. Additional information on PERF can be accessed at http://www.perf.org. DOE agreed to provide funding to hold a review of its water research program in conjunction with the fall 2005 PERF meeting. Argonne National Laboratory (Argonne) was asked to coordinate and host the meeting, which was referred to as the DOE/PERF Water Program Review. The program review was held on November 1-4, 2005, in Annapolis, Maryland, at the Historic Inns of Annapolis. The purpose of the program review was to provide a forum for sharing information, reviewing current programs (especially recent unpublished research), and reviewing industry and regulatory needs regarding water use and reuse issues. PERF and DOE/NETL can use this information to plan for future water-related research projects. The water program review provided a unique opportunity in several ways. First, DOE was able to have all of the contractors currently receiving DOE funds for water research present in one room at the same time. Each contractor described his or her research and was able to learn about the research being conducted by the other researchers. Second, this forum allowed representatives of many large oil and gas companies to hear about the DOE research projects and offer their reactions to DOE and the researchers. Third, most oil and gas meetings focus on either upstream (the exploration and production sector) or downstream (the refining sector) issues. Typically, there is little overlap in content between the two industry sectors. At the program review, attendees with upstream and downstream orientations were able to spend much of their time in joint sessions and could learn more about the other sector.« less

Summary of NASA Lewis Research Center solar heating and cooling and wind energy programs

NASA Technical Reports Server (NTRS)

Vernon, R. W.

1975-01-01

Plans for the construction and operation of a solar heating and cooling system in conjunction with a office building being constructed at Langley Research Center, are discussed. Supporting research and technology includes: testing of solar collectors with a solar simulator, outdoor testing of collectors, property measurements of selective and nonselective coatings for solar collectors, and a solar model-systems test loop. The areas of a wind energy program that are being conducted include: design and operation of a 100-kW experimental wind generator, industry-designed and user-operated wind generators in the range of 50 to 3000 kW, and supporting research and technology for large wind energy systems. An overview of these activities is provided.

Energy Recovery Hydropower: Prospects for Off-Setting Electricity Costs for Agricultural, Municipal, and Industrial Water Providers and Users; July 2017 - September 2017

DOE Office of Scientific and Technical Information (OSTI.GOV)

Levine, Aaron L.; Curtis, Taylor L.; Johnson, Kurt

Energy recovery hydropower is one of the most cost-effective types of new hydropower development because it is constructed utilizing existing infrastructure, and it is typically able to complete Federal Energy Regulatory Commission (FERC) review in 60 days. Recent changes in federal and state policy have supported energy recovery hydropower. In addition, some states have developed programs and policies to support energy recovery hydropower, including resource assessments, regulatory streamlining initiatives, and grant and loan programs to reduce project development costs. This report examines current federal and state policy drivers for energy recovery hydropower, reviews market trends, and looks ahead at futuremore » federal resource assessments and hydropower reform legislation.« less

The "We Card" program: tobacco industry "youth smoking prevention" as industry self-preservation.

PubMed

Apollonio, Dorie E; Malone, Ruth E

2010-07-01

The "We Card" program is the most ubiquitous tobacco industry "youth smoking prevention" program in the United States, and its retailer materials have been copied in other countries. The program's effectiveness has been questioned, but no previous studies have examined its development, goals, and uses from the tobacco industry's perspective. On the basis of our analysis of tobacco industry documents released under the 1998 Master Settlement Agreement, we concluded that the We Card program was undertaken for 2 primary purposes: to improve the tobacco industry's image and to reduce regulation and the enforcement of existing laws. Policymakers should be cautious about accepting industry self-regulation at face value, both because it redounds to the industry's benefit and because it is ineffective.

Laser and optics activities at CREOL

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stickley, C.M.

1995-06-01

CREOL is an interdisciplinary institute with a mission to foster and support research and education in the optical and laser sciences and engineering. CREOL`s principal members are its 21-strong faculty. The faculty are encouraged and supported in developing, maintaining, and expanding innovative and sponsored research programs, especially ones that are coupled to industry`s needs. The CREOL Director and Assistant Director, through empowerment by the CREOL faculty, coordinate and oversee the interactive, interdisciplinary projects of the faculty, the 85 graduate students and the 39 research staff. CREOL integrates these research efforts with the general educational mission and goals of the university,more » develops comprehensive course work in the optical and laser sciences and engineering, provides guidance and instruction to graduate students, administers MS and PhD programs, and provides facilities, funds, and administrative support to assist the faculty in carrying out CREOL`s mission and obtaining financial support for the research projects. CREOL`s specific areas of research activity include the following: IR systems; nonlinear optics; crystal growth; nonlinear integrated optics; new solid-state lasers; tunable far-infrared lasers; thin-film optics; theory; semiconductor lasers; x-ray/optical scattering; laser-induced damage; free-electron lasers; solid-state spectroscopy; x-ray sources and applications; laser propagation; laser processing of materials; optical design; optical limiting/sensor protection; diffractive optics; quantum well optoelectronics; dense plasmas/high-field physics; laser radar and remote sensing; diode-based lasers; and glass science.« less

High-speed civil transport issues and technology program

NASA Technical Reports Server (NTRS)

Hewett, Marle D.

1992-01-01

A strawman program plan is presented, consisting of technology developments and demonstrations required to support the construction of a high-speed civil transport. The plan includes a compilation of technology issues related to the development of a transport. The issues represent technical areas in which research and development are required to allow airframe manufacturers to pursue an HSCT development. The vast majority of technical issues presented require flight demonstrated and validated solutions before a transport development will be undertaken by the industry. The author believes that NASA is the agency best suited to address flight demonstration issues in a concentrated effort. The new Integrated Test Facility at NASA Dryden Flight Research Facility is considered ideally suited to the task of supporting ground validations of proof-of-concept and prototype system demonstrations before night demonstrations. An elaborate ground hardware-in-the-loop (iron bird) simulation supported in this facility provides a viable alternative to developing an expensive fill-scale prototype transport technology demonstrator. Drygen's SR-71 assets, modified appropriately, are a suitable test-bed for supporting flight demonstrations and validations of certain transport technology solutions. A subscale, manned or unmanned flight demonstrator is suitable for flight validation of transport technology solutions, if appropriate structural similarity relationships can be established. The author contends that developing a full-scale prototype transport technology demonstrator is the best alternative to ensuring that a positive decision to develop a transport is reached by the United States aerospace industry.

OPTIMIZATION OF MUD HAMMER DRILLING PERFORMANCE - A PROGRAM TO BENCHMARK THE VIABILITY OF ADVANCED MUD HAMMER DRILLING

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gordon Tibbitts; Arnis Judzis

2002-04-01

This document details the progress to date on the OPTIMIZATION OF MUD HAMMER DRILLING PERFORMANCE--A PROGRAM TO BENCHMARK THE VIABILITY OF ADVANCED MUD HAMMER DRILLING contract for the quarter starting January 2002 through March 2002. Accomplishments include the following: In accordance to Task 7.0 (D. No.2 Technical Publications) TerraTek, NETL, and the Industry Contributors successfully presented a paper detailing Phase 1 testing results at the February 2002 IADC/SPE Drilling Conference, a prestigious venue for presenting DOE and private sector drilling technology advances. The full reference is as follows: (1) IADC/SPE 74540 ''World's First Benchmarking of Drilling Mud Hammer Performance atmore » Depth Conditions'' authored by Gordon A. Tibbitts, TerraTek; Roy C. Long, US Department of Energy, Brian E. Miller, BP America, Inc.; Arnis Judzis, TerraTek; and Alan D. Black, TerraTek. Gordon Tibbitts, TerraTek, will presented the well-attended paper in February of 2002. The full text of the Mud Hammer paper was included in the last quarterly report. (2) The Phase 2 project planning meeting (Task 6) was held at ExxonMobil's Houston Greenspoint offices on February 22, 2002. In attendance were representatives from TerraTek, DOE, BP, ExxonMobil, PDVSA, Novatek, and SDS Digger Tools. (3) PDVSA has joined the advisory board to this DOE mud hammer project. PDVSA's commitment of cash and in-kind contributions were reported during the last quarter. (4) Strong Industry support remains for the DOE project. Both Andergauge and Smith Tools have expressed an interest in participating in the ''optimization'' phase of the program. The potential for increased testing with additional Industry cash support was discussed at the planning meeting in February 2002.« less

Dual roles of infrared imaging on a university campus: serving the physical plant while enhancing a technology-based curriculum

NASA Astrophysics Data System (ADS)

Miles, Jonathan J.

2001-03-01

The campus of a comprehensive, residential university is in many respects a small city unto itself. All the amenities and services one would expect in a typical community are readily available on a college campus, including residences, athletic and dining facilities, libraries, and stores. A large campus, therefore, requires a reliable energy plant to provide steam, hot water, chilled water, and electricity. James Madison University supports two power plants: a vintage steam plant and a modern resource recovery facility comprising two solid-waste incinerators and two gas-fired units for steam generation, three steam-driven absorption- chilling units, and a single steam-driven generator for peak electricity production. Infrared imaging, as a teaching tool, was introduced in the Program of Integrated Science and Technology at James Madison University in 1997. The Infrared Development and Thermal Testing Laboratory was established at the university later in 1997 with government and industry support, and it is presently equipped with infrared imagers and scanners, single-point detectors, and data-acquisition systems. A study was conducted between 1998 and 1999 to test the economic feasibility of implementing an IR-based predictive maintenance program in the university steam plant. This paper describes the opportunities created at James Madison University to develop IR-based predictive maintenance programs that enhance the operation of the university energy plants; to establish IR-related research and development activities that support government and industry activities; and to enhance a science- and technology-based curriculum by way of unique, IR-based laboratory experiences and demonstrations.

Operator Performance Support System (OPSS)

NASA Technical Reports Server (NTRS)

Conklin, Marlen Z.

1993-01-01

In the complex and fast reaction world of military operations, present technologies, combined with tactical situations, have flooded the operator with assorted information that he is expected to process instantly. As technologies progress, this flow of data and information have both guided and overwhelmed the operator. However, the technologies that have confounded many operators today can be used to assist him -- thus the Operator Performance Support Team. In this paper we propose an operator support station that incorporates the elements of Video and Image Databases, productivity Software, Interactive Computer Based Training, Hypertext/Hypermedia Databases, Expert Programs, and Human Factors Engineering. The Operator Performance Support System will provide the operator with an integrating on-line information/knowledge system that will guide expert or novice to correct systems operations. Although the OPSS is being developed for the Navy, the performance of the workforce in today's competitive industry is of major concern. The concepts presented in this paper which address ASW systems software design issues are also directly applicable to industry. the OPSS will propose practical applications in how to more closely align the relationships between technical knowledge and equipment operator performance.

NASA's Microgravity Research Program

NASA Technical Reports Server (NTRS)

Woodard, Dan

1998-01-01

This fiscal year (FY) 1997 annual report describes key elements of the NASA Microgravity Research Program (MRP) as conducted by the Microgravity Research Division (MRD) within NASA's Office of Life and Microgravity, Sciences and Applications. The program's goals, approach taken to achieve those goals, and program resources are summarized. All snapshots of the program's status at the end of FY 1997 and a review of highlights and progress in grounds and flights based research are provided. Also described are major space missions that flew during FY 1997, plans for utilization of the research potential of the International Space Station, the Advanced Technology Development (ATD) Program, and various educational/outreach activities. The MRP supports investigators from academia, industry, and government research communities needing a space environment to study phenomena directly or indirectly affected by gravity.

NREL and Sandia National Laboratories (SNL) Support of Ocean Renewable Power Company's TidGen™ Power System Technology Readiness Advancement Initiative Project

DOE Office of Scientific and Technical Information (OSTI.GOV)

LiVecchi, Al

2015-05-07

This document summarizes the tasks identified for National Laboratory technical support of Ocean Renewable Power Corporation (ORPC) DOE grant awarded under the FY10 Industry Solicitation DE-FOA-0000293: Technology Readiness Advancement Initiative. The system ORPC will deploy in Cobscook Bay, ME is known as the TidGen™ Power System. The Turbine Generator Unit (TGU) each have a rated capacity of 150 to 175 kW, and they are mounted on bottom support frames and connected to an onshore substation using an underwater power and control cable. This system is designed for tidal energy applications in water depths from 60 to 150 feet. In fundingmore » provided separately by DOE, National Laboratory partners NREL and SNL will provide in-kind resources and technical expertise to help ensure that industry projects meet DOE WWPP (Wind and Water Power Program) objectives by reducing risk to these high value projects.« less

Second AIAA/NASA USAF Symposium on Automation, Robotics and Advanced Computing for the National Space Program

NASA Technical Reports Server (NTRS)

Myers, Dale

1987-01-01

An introduction is given to NASA goals in the development of automation (expert systems) and robotics technologies in the Space Station program. Artificial intelligence (AI) has been identified as a means to lowering ground support costs. Telerobotics will enhance space assembly, servicing and repair capabilities, and will be used for an estimated half of the necessary EVA tasks. The general principles guiding NASA in the design, development, ground-testing, interactions with industry and construction of the Space Station component systems are summarized. The telerobotics program has progressed to a point where a telerobot servicer is a firm component of the first Space Station element launch, to support assembly, maintenance and servicing of the Station. The University of Wisconsin has been selected for the establishment of a Center for the Commercial Development of Space, specializing in space automation and robotics.

Propulsion Controls and Diagnostics Research in Support of NASA Aeronautics and Exploration Mission Programs

NASA Technical Reports Server (NTRS)

Garg, Sanjay

2011-01-01

The Controls and Dynamics Branch (CDB) at National Aeronautics and Space Administration (NASA) Glenn Research Center (GRC) in Cleveland, Ohio, is leading and participating in various projects in partnership with other organizations within GRC and across NASA, the U.S. aerospace industry, and academia to develop advanced propulsion controls and diagnostics technologies that will help meet the challenging goals of NASA programs under the Aeronautics Research and Exploration Systems Missions. This paper provides a brief overview of the various CDB tasks in support of the NASA programs. The programmatic structure of the CDB activities is described along with a brief overview of each of the CDB tasks including research objectives, technical challenges, and recent accomplishments. These tasks include active control of propulsion system components, intelligent propulsion diagnostics and control for reliable fault identification and accommodation, distributed engine control, and investigations into unsteady propulsion systems.

Design and Testing of CO 2 Compression Using Supersonic Shock Wave Technology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Koopman, Aaron

This report summarizes work performed by Ramgen and subcontractors in pursuit of the design and construction of a 10 MW supersonic CO2 compressor and supporting facility. The compressor will demonstrate application of Ramgen’s supersonic compression technology at an industrial scale using CO2 in a closed-loop. The report includes details of early feasibility studies, CFD validation and comparison to experimental data, static test experimental results, compressor and facility design and analyses, and development of aerodynamic tools. A summary of Ramgen's ISC Engine program activity is also included. This program will demonstrate the adaptation of Ramgen's supersonic compression and advanced vortex combustionmore » technology to result in a highly efficient and cost effective alternative to traditional gas turbine engines. The build out of a 1.5 MW test facility to support the engine and associated subcomponent test program is summarized.« less

The Capability Portfolio Analysis Tool (CPAT): A Mixed Integer Linear Programming Formulation for Fleet Modernization Analysis (Version 2.0.2).

DOE Office of Scientific and Technical Information (OSTI.GOV)

Waddell, Lucas; Muldoon, Frank; Henry, Stephen Michael

In order to effectively plan the management and modernization of their large and diverse fleets of vehicles, Program Executive Office Ground Combat Systems (PEO GCS) and Program Executive Office Combat Support and Combat Service Support (PEO CS&CSS) commis- sioned the development of a large-scale portfolio planning optimization tool. This software, the Capability Portfolio Analysis Tool (CPAT), creates a detailed schedule that optimally prioritizes the modernization or replacement of vehicles within the fleet - respecting numerous business rules associated with fleet structure, budgets, industrial base, research and testing, etc., while maximizing overall fleet performance through time. This paper contains a thor-more » ough documentation of the terminology, parameters, variables, and constraints that comprise the fleet management mixed integer linear programming (MILP) mathematical formulation. This paper, which is an update to the original CPAT formulation document published in 2015 (SAND2015-3487), covers the formulation of important new CPAT features.« less

Mentornet - E-Mentoring for Women Students in Engineering and Science

NASA Astrophysics Data System (ADS)

Single, Peg Boyle; Muller, Carol B.; Cunningham, Christine M.; Single, Richard M.; Carlsen, William S.

MentorNet www.MentorNet.net;, the E-Mentoring Network for Diversity in Engineering and Science, addresses the underrepresentation of women in science, technology, engineering, and mathematics "STEM". MentorNet offers a multiinstitutional, structured, electronic mentoring "e-mentoring" program that pairs undergraduate and graduate students, primarily women, with professionals and supports them through e-mentoring relationships of specified lengths. The program evaluations established that over 90% of the participants would recommend MentorNet to a friend or colleague. The e-mentoring program allowed participants to establish satisfactory and beneficial e-mentoring relationships based on investments of approximately 20 minutes per week - in between more serious exchanges, email exchanges that included light-hearted social interactions and jokes were an important aspect of sustaining e-mentoring relationships. Participation in MentorNet increased the students' self-confidence in their f elds - desire to obtain work in industry, national laboratories, or national agencies; and intent to pursue careers in their fields. Three years of evaluation results support the need for and efficacy of the program.

Rutgers Young Horse Teaching and Research Program: sustainability of taking a risk with "at risk" horses.

PubMed

Ralston, Sarah L; Molnar, Anne

2012-12-01

In 1999, the Young Horse Teaching and Research Program (YHTRP) was initiated at Rutgers University. The unique aspect of the program was using horses generally considered "at risk" and in need of rescue, but of relatively low value. The risks of using horses from pregnant mare urine (PMU) ranches and Bureau of Land Management (BLM) mustangs were high, but, ultimately, unrealized. No students or staff members were seriously injured over the course of the next 12 yr, and the horses were sold annually as highly desirable potential athletes or pleasure horses, usually at a profit. The use of "at risk" horses generated a significant amount of positive media attention and attracted substantial funding in the form of donations and sponsorships, averaging over $60,000 (USD)per year. Despite economic downturns, public and industry support provided sustainability for the program with only basic University infrastructural support. Taking the risk of using "at risk" horses paid off, with positive outcomes for all.

PROCEEDINGS OF THE 1999 OIL HEAT TECHNOLOGY CONFERENCE AND WORKSHOP.

DOE Office of Scientific and Technical Information (OSTI.GOV)

MCDONALD,R.J.

1999-04-01

The 1999 Oil Heat Technology Conference and Workshop, April 15-16 at Brookhaven National Laboratory (BNL) is sponsored by the U. S. Department of Energy, Office of Building Technology, State and Community Programs (DOEBTS). The meeting is also co-sponsored by the: Petroleum Marketers Association of America, New England Fuel Institute, Oilheat Manufacturers Association, National Association of Oil Heat Service Managers, New York State Energy Research and Development Authority, Empire State Petroleum Association, New York Oil Heating Association, Oil Heat Institute of Long Island, and the Pennsylvania Petroleum Association. BNL is proud to acknowledge all of our 1999 co-sponsors, without their helpmore » and support the conference would have been canceled due to budget restrictions. It is quite gratifying to see an industry come together to help support an activity like the technology conference, for the benefit of the industry as a whole. The 1999 Oil Heat Technology Conference and Workshop, will be the thirteenth since 1984, is a very valuable technology transfer activity supported by the ongoing Combustion Equipment Technology (Oilheat R and D) program at BNL. The foremost reason for the conference is to provide a platform for the exchange of information and perspectives among international researchers, engineers, manufacturers, service technicians, and marketers of oil-fired space-conditioning equipment. They will provide a conduit by which information and ideas can be exchanged to examine present technologies, as well as helping to develop the future course for oil heating advancement. These conferences also serve as a stage for unifying government representatives, researchers, fuel oil marketers, and other members of the oil-heat industry in addressing technology advancements in this important energy use sector.« less

78 FR 54197 - Energy Efficiency Program for Commercial and Industrial Equipment: Energy Conservation Standards...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-03

.... EERE-2013-BT-STD-0030] RIN 1904-AD01 Energy Efficiency Program for Commercial and Industrial Equipment... Certain Industrial Equipment,'' a program covering certain commercial and industrial equipment (hereafter... (AEMTCA), Public Law 112-210 (Dec. 18, 2012). EPCA covers many types of commercial and industrial...

Successes and challenges in a novel doctoral program in systems agriculture: a case example.

PubMed

Lust, D; Topliff, D; Deotte, R

2010-01-01

A doctoral program in Systems Agriculture was initiated at West Texas A&M University, Canyon, TX, in September, 2003. The stated objective of the program was "..to prepare leaders for the agricultural industry that are trained in a multidisciplinary, research-based curriculum that emphasizes a systems approach to problem solving". The program offers a single doctoral degree in Agriculture and accepts qualified students with a master's or professional degree in agricultural or related disciplines. Courses related to systems methodologies, leadership, agricultural economics, plant and soil science, and animal science are required. Additional program requirements include a systems research project and dissertation, leadership training, and written and oral exams. The program has exceeded enrollment and graduation targets, suggesting interest in this approach to a doctoral degree. Students have entered the program with M.S. backgrounds in education, traditional agricultural disciplines, veterinary medicine, business, and physics. Graduates have gained employment in industry, university teaching and research, government research/administration, and extension. Doctoral student projects in systems agriculture contributed to curriculum changes and to the conceptual framework adopted by a multi-state research group. Designing and teaching courses for students with diverse backgrounds has been challenging. Development of a common understanding of systems agriculture was identified by a third-party program review as an issue for faculty. Development and maintenance of program standards and administrative procedures posed additional challenges. Leadership, administrative support, and timely and continuing program assessment are suggested as necessary components for a nontraditional doctoral program.

Status of Activities to Implement a Sustainable System of MC&A Equipment and Methodological Support at Rosatom Facilities

DOE Office of Scientific and Technical Information (OSTI.GOV)

J.D. Sanders

Under the U.S.-Russian Material Protection, Control and Accounting (MPC&A) Program, the Material Control and Accounting Measurements (MCAM) Project has supported a joint U.S.-Russian effort to coordinate improvements of the Russian MC&A measurement system. These efforts have resulted in the development of a MC&A Equipment and Methodological Support (MEMS) Strategic Plan (SP), developed by the Russian MEM Working Group. The MEMS SP covers implementation of MC&A measurement equipment, as well as the development, attestation and implementation of measurement methodologies and reference materials at the facility and industry levels. This paper provides an overview of the activities conducted under the MEMS SP,more » as well as a status on current efforts to develop reference materials, implement destructive and nondestructive assay measurement methodologies, and implement sample exchange, scrap and holdup measurement programs across Russian nuclear facilities.« less

Review of NASA programs in applying aerospace technology to energy

NASA Technical Reports Server (NTRS)

Schwenk, F. C.

1981-01-01

NASA's role in energy research and development, with the aid of aerospace technology, is reviewed. A brief history, which began in 1974 with studies of solar energy systems on earth, is presented, and the major energy programs, consisting of over 60 different projects, are described, and include solar terrestrial systems, conservation and fossil energy systems, and space utilization systems. Special attention is given to the Satellite Power System and the isolation of nuclear wastes in space. Emerging prospects for NASA programs in energy technology include bioenergy, and ocean thermal energy conversion, coal extraction and conversion technologies, and support to the nuclear industry in power plant systems safety.

Research and Technology 1996: Innovation in Time and Space

NASA Technical Reports Server (NTRS)

1996-01-01

As the NASA Center responsible for assembly, checkout, servicing, launch, recovery, and operational support of Space Transportation System elements and payloads, the John F. Kennedy Space Center is placing increasing emphasis on its advanced technology development program. This program encompasses the efforts of the Engineering Development Directorate laboratories, most of the KSC operations contractors, academia, and selected commercial industries - all working in a team effort within their own areas of expertise. This edition of the Kennedy Space Center Research and Technology 1996 Annual Report covers efforts of all these contributors to the KSC advanced technology development program, as well as our technology transfer activities.

ALVA: A Successful Program for Increasing the Number of Minority Undergraduates who Earn Engineering Degrees

PubMed Central

Peterson, Lisa; Pinkham, Scott; Jordan, Cathryne

2010-01-01

A highly successful minority outreach and support program for incoming college freshmen in engineering is described. The University of Washington has been running ALVA (Alliances for Learning and Vision for underrepresented Americans) for 11 years and continuously tracks its participants. Partners in ALVA come from the government, education, and industry. This program targets talented underrepresented minority students and addresses four major hurdles that face minority students in engineering: lack of vision of themselves as an engineer, finances, community, and academic preparation. We will present ALVA as a model that can be duplicated at other colleges and universities. PMID:25242894

Overview of demonstrator program of Japanese Smart Materials and Structure System project

NASA Astrophysics Data System (ADS)

Tajima, Naoyuki; Sakurai, Tateo; Sasajima, Mikio; Takeda, Nobuo; Kishi, Teruo

2003-08-01

The Japanese Smart Material and Structure System Project started in 1998 as five years' program that funded by METI (Ministry of Economy, Trade and Industry) and supported by NEDO (New Energy and Industrial Technology Development Organization). Total budget of five years was finally about 3.8 billion Japanese yen. This project has been conducted as the Academic Institutions Centered Program, namely, one of collaborated research and development among seven universities (include one foreign university), seventeen Industries (include two foreign companies), and three national laboratories. At first, this project consisted of four research groups that were structural health monitoring, smart manufacturing, active/adaptive structures, and actuator material/devices. Two years later, we decided that two demonstrator programs should be added in order to integrate the developed sensor and actuator element into the smart structure system and verify the research and development results of above four research groups. The application target of these demonstrators was focused to the airplane, and two demonstrators that these shapes simulate to the fuselage of small commercial airplane (for example, Boeing B737) had been established. Both demonstrators are cylindrical structures with 1.5 m in diameter and 3 m in length that the first demonstrator has CFRP skin-stringer and the second one has CFRP skin. The first demonstrator integrates the following six innovative techniques: (1) impact monitoring using embedded small diameter optical fiber sensors newly developed in this program, (2) impact monitoring using the integrated acoustic emission (AE) systems, (3) whole-field strain mapping using the BOTDR/FBG integrated system, (4) damage suppression using embedded shape memory alloy (SMA) films, (5) maximum and cyclic strain sensing using smart composite patches, and (6) smart manufacturing using the integrated sensing system. The second one is for demonstrating the suppression of vibration and acoustic noise generated in the composite cylindrical structure. In this program, High-performance PZT actuators/sensors developed in this program are also installed. The whole tests and evaluations have now been finished. This paper presents the outline of demonstrator programs, followed by six presentations that show the detail verification results of industrial demonstration themes.

The “We Card” Program: Tobacco Industry “Youth Smoking Prevention” as Industry Self-Preservation

PubMed Central

Malone, Ruth E.

2010-01-01

The “We Card” program is the most ubiquitous tobacco industry “youth smoking prevention” program in the United States, and its retailer materials have been copied in other countries. The program's effectiveness has been questioned, but no previous studies have examined its development, goals, and uses from the tobacco industry's perspective. On the basis of our analysis of tobacco industry documents released under the 1998 Master Settlement Agreement, we concluded that the We Card program was undertaken for 2 primary purposes: to improve the tobacco industry's image and to reduce regulation and the enforcement of existing laws. Policymakers should be cautious about accepting industry self-regulation at face value, both because it redounds to the industry's benefit and because it is ineffective. PMID:20466965

Bulletin of the Division of Electrical Engineering, 1987-1988, volume 3, number 2

NASA Astrophysics Data System (ADS)

1988-05-01

A report is provided on the activities of the Division of Electrical Engineering of the National Research Council of Canada. The Division engages in the development of standards and test procedures, and undertakes applied research in support of Canadian industry, government departments, and universities. Technology transfer and collaborative research continue to grow in importance as focuses of Division activities. The Division is comprised of three sections: the Laboratory for Biomedical Engineering, the Laboratory for Electromagnetic and Power Engineering, and the Laboratory for Intelligent Systems. An agreement has been reached to commercially exploit the realtime multiprocessor operating system Harmony. The dielectrics group has made contract research agreements with industry from both Canada and the United States. The possibility of employing a new advanced laser vision camera, which can be mounted on a robot arm in a variety of industrial applications is being explored. Potential short-term spinoffs related to intelligent wheelchairs are being sought as part of the new interlaboratory program which has as its long-term objective the development of a mobile robot for health care applications. A program in applied artificial intelligence has been established. Initiatives in collaboration with outside groups include proposals for major institutes in areas ranging from police and security research to rehabilitation research, programs to enhance Canadian industrial competence working with the Canadian Manufacturers' Association and other government departments, and approaches to the utilization of existing facilities which will make them more valuable without significant financial expenditures.

Developing a Capstone Course within a Health Informatics Program

PubMed Central

Hackbarth, Gary; Cata, Teuta; Cole, Laura

2012-01-01

This article discusses the ongoing development of a health informatics capstone program in a Midwest university from the hiring of a program coordinator to the development of a capstone course, through initial student results. University health informatics programs require a strong academic program to be successful but also require a spirited program coordinator to manage resources and organize an effective capstone course. This is particularly true of health informatics master's programs that support health industry career fields, whereby employers can locate and work with a pool of qualified applicants. The analysis of students’ logs confirms that students’ areas of focus and concern are consistent with course objectives and company work requirements during the work-study portion of the student capstone project. The article further discusses lessons learned and future improvements to be made in the health informatics capstone course. PMID:22783150

Education and training in optics fabrication: establishing unique partnerships to address workforce training needs for optics and other high technology manufacturing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kiernan, K. J., LLNL

1998-03-11

Over the past several years much concern has been voiced about the lack of trained technologists to support high-technology industry and manufacturing in the United States. Attracting and training both new members and upgrading and retraining current members of this area of the workforce has many challenges to address before adequate numbers of well trained individuals will be available to fill the growing demand and help secure our nation`s economic industrial edge. Among the concerns are the lack of effective training programs, available funding, career image, and vehicles to educate the public on the availability of positions and excellent ratemore » of compensation. These concems which effect many areas of industrial manufacturing have been highlighted by government organizations, such as the Department of Labor statistics, and professional journals and publications. In the specific area of optical fabrication, journals such as ``Laser Focus: and Photon& Spectra`` have dedicated articles and editorials discussing the lack of optical fabrication training resources in the United States. Examples of other vocational areas lacking skilled workers, such as precision machinists, are reflected in articles in other publications such as ``Manufacturing Engineering``. The rising concern by both industry and educational institutions has given rise to examining new and innovative approaches to cooperatively solving these problems. In 1994, the American Association of Community Colleges in collaboration with the U.S. Department of Labor, published a study on creative partnerships between community colleges, business, industry and governmental organizations. The premise developed by the research editor was that while partnerships between colleges and private and public sectors have been developed with great benefit for many years, the challenges facing all parties concerned with workforce development going into a new century will require a new magnitude of creativity. Discussions among both industrial and educational audiences have highlighted this growing concern in a way that is bringing about new ways of thinking in joint collaborations which can successfully, and cost effectively, solve these shortages. Through unique partnering approaches between educational institutions, industry, and national laboratories, new cost-effective workforce training and retraining programs are being developed to maintain this nation`s leadership role in high-technology industrial development. Successful new technician training programs currently being pursued through critical links between Lawrence Livermore National Laboratory (LLNL), community colleges, industry, and high schools are meeting both employer and trainee needs. Currently, under memorandums of agreement which provide for the sharing of curriculum, technical expertise, equipment, and public awareness, identified needs for enhanced optician, laser electro-optic technologist, machinist, and rapid transit operator technical training are being addressed. This session will describe these industry-driven programs, with particular emphasis on the optician training collaborative developed by LLNL, Monroe Community College, and American Precision Manufacturers Association (APOMA) industrial representatives to support the needs of the nation`s optics industry, including the National Ignition Facility (NIF). The $1.2 billion ND? will be the world`s largest optical instrument and is currently the U.S.`s largest R&D project. It will require more than 7,000 meter-class precision optics and more than 15,000 small precision optics. The national capacity for large laser optics fabrication must be increased substantially over its current level, and optics fabrication costs reduced by a factor of two to four times to achieve this goal. It is imperative that an enhanced skilled technical workforce pool be available to enable the U.S. optics industry to successfully meet this challenge. Through collaborative efforts which bring together the strengths of Monroe Community College, LLNL, and APOMA, an enhanced training program focusing on helping meet this demand is successfully moving forward. LLNL and APOMA industries have provided much needed equipment to assist Monroe Community College in enhancing their program with additional hands- on courses which are critical to the rounded education of the students graduating and entering a highly competitive workforce. To date, APOMA has donated equipment valued at over $800,000 and LLNL $500,000. Additionally, through an active industrial advisory board, teamed efforts with the college are helping to develop a responsive, well balanced curriculum which provides students industry identified state-of-the-art skills. The benefit to the students is a more relevant education which, in turn, provides employers well trained entry level employees which means quicker productivity time and lower costs to the employers.« less

Central station applications planning activities and supporting studies. [application of photovoltaic technology to power generation plants

NASA Technical Reports Server (NTRS)

Leonard, S. L.; Siegel, B.

1980-01-01

The application of photovoltaic technology in central station (utility) power generation plants is considered. A program of data collection and analysis designed to provide additional information about the subset of the utility market that was identified as the initial target for photovoltaic penetration, the oil-dependent utilities (especially muncipals) of the U.S. Sunbelt, is described along with a series of interviews designed to ascertain utility industry opinions about the National Photovoltaic Program as it relates to central station applications.

Space Resources Utilization Roundtable

NASA Technical Reports Server (NTRS)

1999-01-01

This volume contains abstracts that have been accepted for presentation at the Space Resources Utilization Roundtable, October 27-29, 1999, in Golden, Colorado. The program committee consisted of M. B. Duke (Lunar and Planetary Institute), G. Baughman (Colorado School of Mines), D. Criswell (University of Houston), C. Graham (Canadian Mining Industry Research Organization), H. H. Schmitt (Apollo Astronaut), W. Sharp (Colorado School of Mines), L. Taylor (University of Tennessee), and a space manufacturing representative. Administration and publications support for this meeting were provided by the staff of the Publications and Program Services Department at the Lunar and Planetary Institute.

Doctors or technicians: assessing quality of medical education

PubMed Central

Hasan, Tayyab

2010-01-01

Medical education institutions usually adapt industrial quality management models that measure the quality of the process of a program but not the quality of the product. The purpose of this paper is to analyze the impact of industrial quality management models on medical education and students, and to highlight the importance of introducing a proper educational quality management model. Industrial quality management models can measure the training component in terms of competencies, but they lack the educational component measurement. These models use performance indicators to assess their process improvement efforts. Researchers suggest that the performance indicators used in educational institutions may only measure their fiscal efficiency without measuring the quality of the educational experience of the students. In most of the institutions, where industrial models are used for quality assurance, students are considered as customers and are provided with the maximum services and facilities possible. Institutions are required to fulfill a list of recommendations from the quality control agencies in order to enhance student satisfaction and to guarantee standard services. Quality of medical education should be assessed by measuring the impact of the educational program and quality improvement procedures in terms of knowledge base development, behavioral change, and patient care. Industrial quality models may focus on academic support services and processes, but educational quality models should be introduced in parallel to focus on educational standards and products. PMID:23745059

Doctors or technicians: assessing quality of medical education.

PubMed

Hasan, Tayyab

2010-01-01

Medical education institutions usually adapt industrial quality management models that measure the quality of the process of a program but not the quality of the product. The purpose of this paper is to analyze the impact of industrial quality management models on medical education and students, and to highlight the importance of introducing a proper educational quality management model. Industrial quality management models can measure the training component in terms of competencies, but they lack the educational component measurement. These models use performance indicators to assess their process improvement efforts. Researchers suggest that the performance indicators used in educational institutions may only measure their fiscal efficiency without measuring the quality of the educational experience of the students. In most of the institutions, where industrial models are used for quality assurance, students are considered as customers and are provided with the maximum services and facilities possible. Institutions are required to fulfill a list of recommendations from the quality control agencies in order to enhance student satisfaction and to guarantee standard services. Quality of medical education should be assessed by measuring the impact of the educational program and quality improvement procedures in terms of knowledge base development, behavioral change, and patient care. Industrial quality models may focus on academic support services and processes, but educational quality models should be introduced in parallel to focus on educational standards and products.

Swan: A tool for porting CUDA programs to OpenCL

NASA Astrophysics Data System (ADS)

Harvey, M. J.; De Fabritiis, G.

2011-04-01

The use of modern, high-performance graphical processing units (GPUs) for acceleration of scientific computation has been widely reported. The majority of this work has used the CUDA programming model supported exclusively by GPUs manufactured by NVIDIA. An industry standardisation effort has recently produced the OpenCL specification for GPU programming. This offers the benefits of hardware-independence and reduced dependence on proprietary tool-chains. Here we describe a source-to-source translation tool, "Swan" for facilitating the conversion of an existing CUDA code to use the OpenCL model, as a means to aid programmers experienced with CUDA in evaluating OpenCL and alternative hardware. While the performance of equivalent OpenCL and CUDA code on fixed hardware should be comparable, we find that a real-world CUDA application ported to OpenCL exhibits an overall 50% increase in runtime, a reduction in performance attributable to the immaturity of contemporary compilers. The ported application is shown to have platform independence, running on both NVIDIA and AMD GPUs without modification. We conclude that OpenCL is a viable platform for developing portable GPU applications but that the more mature CUDA tools continue to provide best performance. Program summaryProgram title: Swan Catalogue identifier: AEIH_v1_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEIH_v1_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: GNU Public License version 2 No. of lines in distributed program, including test data, etc.: 17 736 No. of bytes in distributed program, including test data, etc.: 131 177 Distribution format: tar.gz Programming language: C Computer: PC Operating system: Linux RAM: 256 Mbytes Classification: 6.5 External routines: NVIDIA CUDA, OpenCL Nature of problem: Graphical Processing Units (GPUs) from NVIDIA are preferentially programed with the proprietary CUDA programming toolkit. An alternative programming model promoted as an industry standard, OpenCL, provides similar capabilities to CUDA and is also supported on non-NVIDIA hardware (including multicore ×86 CPUs, AMD GPUs and IBM Cell processors). The adaptation of a program from CUDA to OpenCL is relatively straightforward but laborious. The Swan tool facilitates this conversion. Solution method:Swan performs a translation of CUDA kernel source code into an OpenCL equivalent. It also generates the C source code for entry point functions, simplifying kernel invocation from the host program. A concise host-side API abstracts the CUDA and OpenCL APIs. A program adapted to use Swan has no dependency on the CUDA compiler for the host-side program. The converted program may be built for either CUDA or OpenCL, with the selection made at compile time. Restrictions: No support for CUDA C++ features Running time: Nominal

Sustained Energy Savings Achieved through Successful Industrial Customer Interaction with Ratepayer Programs: Case Studies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Goldberg, Amelie; Hedman, Bruce; Taylor, Robert P.

Many states have implemented ratepayer-funded programs to acquire energy efficiency as a predictable and reliable resource for meeting existing and future energy demand. These programs have become a fixture in many U.S. electricity and natural gas markets as they help postpone or eliminate the need for expensive generation and transmission investments. Industrial energy efficiency (IEE) is an energy efficiency resource that is not only a low cost option for many of these efficiency programs, but offers productivity and competitive benefits to manufacturers as it reduces their energy costs. However, some industrial customers are less enthusiastic about participating in these programs.more » IEE ratepayer programs suffer low participation by industries across many states today despite a continual increase in energy efficiency program spending across all types of customers, and significant energy efficiency funds can often go unused for industrial customers. This paper provides four detailed case studies of companies that benefited from participation in their utility’s energy efficiency program offerings and highlights the business value brought to them by participation in these programs. The paper is designed both for rate-payer efficiency program administrators interested in improving the attractiveness and effectiveness of industrial efficiency programs for their industrial customers and for industrial customers interested in maximizing the value of participating in efficiency programs.« less

Chapter 6: Wood energy and competing wood product markers

Treesearch

Kenneth E. Skog; Robert C. Abt; Karen Abt

2014-01-01

Understanding the effect of expanding wood energy markets is important to all wood-dependent industries and to policymakers debating the implementation of public programs to support the expansion of wood energy generation. A key factor in determining the feasibility of wood energy projects (e.g. wood boiler or pellet plant) is the long-term (i.e. 20-30year) supply...

2005 Mississippi Curriculum Framework: Postsecondary Banking and Finance Technology. (Program CIP: 52.0803 - Banking and Financial Support Services)

ERIC Educational Resources Information Center

Gullett, Janet; Thigpen, Herbert

2005-01-01

As the world economy continues to evolve, businesses and industries must adopt new practices and processes in order to survive. Quality and cost control, work teams and participatory management, and an infusion of technology are transforming the way people work and do business. Employees are now expected to read, write, and communicate…

2010 Mississippi Curriculum Framework: Postsecondary Banking and Finance Technology. (Program CIP: 52.0803 - Banking and Financial Support Services)

ERIC Educational Resources Information Center

Gullett, Janet; Dinkins, Shivochie

2010-01-01

As the world economy continues to evolve, businesses and industries must adopt new practices and processes in order to survive. Quality and cost control, work teams and participatory management, and an infusion of technology are transforming the way people work and do business. Employees are now expected to read, write, and communicate…

Developing a monitoring program for bird populations in the Chiricahua Mountains, Arizona, using citizen observers: Initial stages

Treesearch

Joseph L Ganey; Jose M. Iniguez; Jamie S. Sanderlin; William M. Block

2017-01-01

The Madrean Sky Island region is an ecologically important area harboring exceptional biodiversity, including a unique avifauna that supports a thriving ecotourism industry in southeastern Arizona. This area has been impacted by several large wildfires in recent decades. These wildfires have altered vegetation composition and structure in forests and woodlands, and the...

Idaho Science, Technology, Engineering and Mathematics Overview

ScienceCinema

None

2017-12-09

Idaho National Laboratory has been instrumental in establishing the Idaho Science, Technology, Engineering and Mathematics initiative -- i-STEM, which brings together industry, educators, government and other partners to provide K-12 teachers with support, materials and opportunities to improve STEM instruction and increase student interest in technical careers. You can learn more about INL's education programs at http://www.facebook.com/idahonationallaboratory.

The Power of Career- and Employer-Focused Training and Education. Looking Forward

ERIC Educational Resources Information Center

MDRC, 2017

2017-01-01

Many adults--particularly those with just a high school education--struggle to get and keep jobs that pay enough to support their families and permit upward mobility. At the same time, some employers report difficulty finding people with the right skills to meet their needs. Programs that target in-demand industries or sectors and heavily involve…

Idaho Science, Technology, Engineering and Mathematics Overview

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hampton, Brandon; Shoushtarian, Joannah; Ledoux, P

2011-02-11

Idaho National Laboratory has been instrumental in establishing the Idaho Science, Technology, Engineering and Mathematics initiative -- i-STEM, which brings together industry, educators, government and other partners to provide K-12 teachers with support, materials and opportunities to improve STEM instruction and increase student interest in technical careers. You can learn more about INL's education programs at http://www.facebook.com/idahonationallaboratory.

The Environmental protection agency industrial technology transfer program

NASA Technical Reports Server (NTRS)

Suter, K. H.

1974-01-01

Today TAC consists of a full service information center and five programs, which are: (1) our industrial program; (2) the energy information center; (3) the business and industry extension program; (4) the remote sensing program; and (5) the center for environmental research and development.

Industry experience in promoting weekly iron-folic acid supplementation in the Philippines.

PubMed

Garcia, Josel; Datol-Barrett, Eva; Dizon, Maynilad

2005-12-01

After participating in a pilot project under a government-industry partnership to promote the adoption of weekly iron-folic acid supplementation among women of reproductive age in the Philippines in 1998, United Laboratories (UNILAB), the Philippines' largest private pharmaceutical company, decided in April 2002 to launch a weekly iron-folic acid supplement for pregnant and non-pregnant women under the brand name Femina. The business objective set for the Femina brand was to build the category of preventive iron-folic acid supplements in line with the Philippine Department of Health's advocacy on weekly supplementation as an alternate to daily dosing to reduce the prevalence of anemia in the country. The brand was supported with an integrated mix of traditional advertising media with complementary direct-to-consumer educational programs that aimed to create awareness of iron-deficiency anemia, its causes and effects, and the role of weekly intake of iron-folic acid in preventing the condition. Aggressive marketing support for 1 year was successful in creating awareness among the target women. Significant lessons derived from consumers identified opportunity areas that can be further addressed in developing advocacy programs on weekly iron supplementation implemented on a nationwide scale in the future.

The US DOE-EM International Program - 13004

DOE Office of Scientific and Technical Information (OSTI.GOV)

Elmetti, Rosa R.; Han, Ana M.; Williams, Alice C.

2013-07-01

The U.S. Department of Energy (DOE) Office of Environmental Management (EM) conducts international collaboration activities in support of U.S. policies and objectives regarding the accelerated risk reduction and remediation of environmental legacy of the nations' nuclear weapons program and government sponsored nuclear energy research. The EM International Program supported out of the EM Office of the Associate Principal Deputy Assistant Secretary pursues collaborations with foreign government organizations, educational institutions and private industry to assist in identifying technologies and promote international collaborations that leverage resources and link international experience and expertise. In fiscal year (FY) 2012, the International Program awarded eightmore » international collaborative projects for work scope spanning waste processing, groundwater and soil remediation, deactivation and decommissioning (D and D) and nuclear materials disposition initiatives to seven foreign organizations. Additionally, the International Program's scope and collaboration opportunities were expanded to include technical as well as non-technical areas. This paper will present an overview of the on-going tasks awarded in FY 2012 and an update of upcoming international activities and opportunities for expansion into FY 2013 and beyond. (authors)« less

The US DOE EM international program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Elmetti, Rosa R.; Han, Ana M.; Roach, Jay A.

2013-07-01

The U.S. Department of Energy (DOE) Office of Environmental Management (EM) conducts international collaboration activities in support of U.S. policies and objectives regarding the accelerated risk reduction and remediation of environmental legacy of the nations' nuclear weapons program and government sponsored nuclear energy research. The EM International Program supported out of the EM Office of the Associate Principal Deputy Assistant Secretary pursues collaborations with foreign government organizations, educational institutions and private industry to assist in identifying technologies and promote international collaborations that leverage resources and link international experience and expertise. In fiscal year (FY) 2012, the International Program awarded eightmore » international collaborative projects for work scope spanning waste processing, groundwater and soil remediation, deactivation and decommissioning (D and D) and nuclear materials disposition initiatives to seven foreign organizations. Additionally, the International Program's scope and collaboration opportunities were expanded to include technical as well as non-technical areas. This paper will present an overview of the on-going tasks awarded in FY 2012 and an update of upcoming international activities and opportunities for expansion into the remainder of FY 2013 and beyond. (authors)« less

Increasing public support for food-industry related, obesity prevention policies: The role of a taste-engineering frame and contextualized values.

PubMed

Ortiz, Selena E; Zimmerman, Frederick J; Adler, Gary J

2016-05-01

Support for policies to combat obesity is often undermined by a public sense that obesity is largely a matter of personal responsibility. Industry rhetoric is a major contributor to this perception, as the soda/fast food/big food companies emphasize choice and individual agency in their efforts to neutralize policies that are burdensome. Yet obesity experts recognize that environmental forces play a major role in obesity. We investigate whether exposure to a taste-engineering frame increases support for food and beverage policies that address obesity. A taste-engineering frame details strategies used by the food industry to engineer preferences and increase the over-consumption of processed foods and sugary beverages. We also examine the effects of exposure to two contextualized values that have recently been promoted in expert discourse-consumer knowledge and consumer safety - on public support of policies. Our research shows how causal frames and contextualized values may effectively produce support for new obesity policies. We use an online survey experiment to test the effects of exposure to a taste-engineering frame (TEF), the value of consumer knowledge (CK), or the value of consumer safety (CS), on level of support for a range of policies. A random sample of adults, age 18 + living in the United States was included in the study (N = 2580). Ordered logistic regression was used to measure the effects of treatment exposure. The primary outcome was level-of-support for four (4) food-industry related, obesity prevention policies (aka food and beverage policies): 1) require food-manufacturers to disclose the amount of additives in food products on food packaging; 2) require food-manufacturers to advertise food products in accordance with their actual nutritional value; 3) prohibit all high-fat, high-sugar food advertising on television programming watched primarily by children; and 4) increase healthy food availability in work sites, schools, and hospitals. These data suggest that a taste-engineering frame and contextualized values significantly increase public support for many of the food and beverage policies tested. Applying a taste-engineering frame and/or contextualized values to address obesity advances a population-based policy agenda to counteract the effects of food-industry strategies. Copyright © 2016 Elsevier Ltd. All rights reserved.

34 CFR 379.1 - What is the Projects With Industry (PWI) program?

Code of Federal Regulations, 2012 CFR

2012-07-01

... 34 Education 2 2012-07-01 2012-07-01 false What is the Projects With Industry (PWI) program? 379.1... SPECIAL EDUCATION AND REHABILITATIVE SERVICES, DEPARTMENT OF EDUCATION PROJECTS WITH INDUSTRY General § 379.1 What is the Projects With Industry (PWI) program? The purpose of this program is to (a) Create...

34 CFR 379.1 - What is the Projects With Industry (PWI) program?

Code of Federal Regulations, 2013 CFR

2013-07-01

... 34 Education 2 2013-07-01 2013-07-01 false What is the Projects With Industry (PWI) program? 379.1... SPECIAL EDUCATION AND REHABILITATIVE SERVICES, DEPARTMENT OF EDUCATION PROJECTS WITH INDUSTRY General § 379.1 What is the Projects With Industry (PWI) program? The purpose of this program is to (a) Create...

34 CFR 379.1 - What is the Projects With Industry (PWI) program?

Code of Federal Regulations, 2014 CFR

2014-07-01

... 34 Education 2 2014-07-01 2013-07-01 true What is the Projects With Industry (PWI) program? 379.1... SPECIAL EDUCATION AND REHABILITATIVE SERVICES, DEPARTMENT OF EDUCATION PROJECTS WITH INDUSTRY General § 379.1 What is the Projects With Industry (PWI) program? The purpose of this program is to (a) Create...

34 CFR 379.1 - What is the Projects With Industry (PWI) program?

Code of Federal Regulations, 2011 CFR

2011-07-01

... 34 Education 2 2011-07-01 2010-07-01 true What is the Projects With Industry (PWI) program? 379.1... SPECIAL EDUCATION AND REHABILITATIVE SERVICES, DEPARTMENT OF EDUCATION PROJECTS WITH INDUSTRY General § 379.1 What is the Projects With Industry (PWI) program? The purpose of this program is to (a) Create...

What are the livestock industries doing, and what do they need from us?

PubMed

Meeker, D L

1999-02-01

Livestock industries are facing global competition and revolutionary changes. While facing this global competition, the similarities of many animal meat products require that they compete on a cost-of-production basis. Additional issues include the environmental impact of animal agriculture, the role of animal products in human nutrition, food safety and quality, biotechnology, animal welfare, and market access. Progressive producers are becoming more aware of the needs of their customers and are striving to improve product quality. Checkoff funds are used to finance promotion, research, and consumer information programs and are increasingly used to finance producer education. Industrialization trends in the livestock industries are changing the needs of constituencies, delivery mechanisms, and relationships with the people involved. Characteristics of closed operations include high production cost, outdated technology, smaller size, older operators, and lack of management focus. Successful operations tend to be growing in capacity, are system-oriented, maintain high throughput, keep accurate records, use outside consultants, and control production costs. Modern livestock production has lowered the cost of production by integrating new production and management technologies. In order for producers to be successful in the future, access to technology, capital, and timely information will be critical. Animal scientists have many common objectives with livestock industries. Their work in research, teaching, and extension is critical for continued progress. However, people in the industries sometimes have the perception that academic arrogance, discipline myopia, uncoordinated research, slow technology transfer, increasing research costs, and counter-productive tenure systems prevent animal scientists from being as relevant and responsive as they could be. Support from the industries is essential as animal scientists and academic departments seek political and funding support. This support can be attained by including integrated systems research, improving communication skills, achieving more efficient research budgets, rapidly publishing results, reducing the cost of information distribution, developing flexible research agendas, retraining scientists, acquiring modern methods, and emphasizing critical thinking, communication, and teamwork when teaching.

Union Women, the Tobacco Industry, and Excise Taxes

PubMed Central

Balbach, Edith D.; Campbell, Richard B.

2009-01-01

Between 1987 and 1997, the tobacco industry used the issue of cigarette excise tax increases to create a political partnership with the Coalition of Labor Union Women (CLUW), a group representing female trade unionists in the U.S. This paper documents how the industry created this relationship and the lessons tobacco-control advocates can learn from the industry’s example, in order to mitigate possible unintended consequences of advocating excise tax increases In 1998, under the terms of the Master Settlement Agreement, the tobacco industry began making documents produced in litigation available publicly. Currently, approximately 50 million pages are available online, including substantial documentation of the industry–CLUW relationship. For this study, a comprehensive search of these documents was conducted. The tobacco industry encouraged CLUW’s opposition to excise tax increases by emphasizing the economic regressivity of these taxes, discussing excise taxes generically to deflect attention from cigarettes, and encouraging opposition to earmarking cigarette taxes to pay for specific programs. In addition, CLUW received at least $221,500 in financial support between 1987 and 1997 and in-kind support for its conferences, membership materials, and other services. Excise tax increases, if pursued without considering the impacts they may have on low-SES populations, may have unintended consequences. In this case, such proposals may have helped to create a relationship between CLUW and the tobacco industry. Because excise taxes are endorsed in the Framework Convention on Tobacco Control, tobacco-control advocates must understand how to build relationships with low-SES populations and mitigate potential alliances with the tobacco industry. PMID:19591750

Saving lives: A meta-analysis of team training in healthcare.

PubMed

Hughes, Ashley M; Gregory, Megan E; Joseph, Dana L; Sonesh, Shirley C; Marlow, Shannon L; Lacerenza, Christina N; Benishek, Lauren E; King, Heidi B; Salas, Eduardo

2016-09-01

As the nature of work becomes more complex, teams have become necessary to ensure effective functioning within organizations. The healthcare industry is no exception. As such, the prevalence of training interventions designed to optimize teamwork in this industry has increased substantially over the last 10 years (Weaver, Dy, & Rosen, 2014). Using Kirkpatrick's (1956, 1996) training evaluation framework, we conducted a meta-analytic examination of healthcare team training to quantify its effectiveness and understand the conditions under which it is most successful. Results demonstrate that healthcare team training improves each of Kirkpatrick's criteria (reactions, learning, transfer, results; d = .37 to .89). Second, findings indicate that healthcare team training is largely robust to trainee composition, training strategy, and characteristics of the work environment, with the only exception being the reduced effectiveness of team training programs that involve feedback. As a tertiary goal, we proposed and found empirical support for a sequential model of healthcare team training where team training affects results via learning, which leads to transfer, which increases results. We find support for this sequential model in the healthcare industry (i.e., the current meta-analysis) and in training across all industries (i.e., using meta-analytic estimates from Arthur, Bennett, Edens, & Bell, 2003), suggesting the sequential benefits of training are not unique to medical teams. Ultimately, this meta-analysis supports the expanded use of team training and points toward recommendations for optimizing its effectiveness within healthcare settings. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

An Analysis of China's Fertilizer Policies: Impacts on the Industry, Food Security, and the Environment.

PubMed

Li, Yuxuan; Zhang, Weifeng; Ma, Lin; Huang, Gaoqiang; Oenema, Oene; Zhang, Fusuo; Dou, Zhengxia

2013-07-01

China has made remarkable strides in recent decades to grow enough food to feed 20% of the world's population with only 9% of the world's arable land. Meanwhile, the nation is experiencing exacerbated air and water pollution problems. Agricultural growth and the pollution aggravation are closely linked with policies affecting fertilizer production and use. Essentially nonexistent in 1950, China's fertilizer industry is now a robust conglomerate producing fertilizers in amounts that not only meet domestic demand but also contribute to international trade. The industry's growth stemmed from a series of policy progressions, featuring (i) a total control system with state ownership and central planning (1949-1984), (ii) a dual system of central planning and market adjustment (1985-1997), (iii) a market-driven system with government-mandated price caps (1998-2009), and (iv) a complete market-oriented system (since 2009). In conjunction with the policy changes were massive subsidy programs totaling more than $18 billion in 2010. The support policies and subsidies helped grow the industry and safeguard an adequate supply of fertilizers at affordable costs to farmers, but the artificially low-priced fertilizers also contributed to a nationwide trend of fertilizer overuse, leading to nutrient pollution. China needs innovative policies and programs to address food security and sustainability challenges. In this study, we review and analyze policies and programs related to China's fertilizer production and use in a 60-yr span (1950-2010) and discuss its impact on the development of the industry, food security, and pressing environmental issues. Finally, our study analyzes long-term trends in fertilizer use in China and offers some key viewpoints to stimulate debates among all stakeholders. Copyright © by the American Society of Agronomy, Crop Science Society of America, and Soil Science Society of America, Inc.

Physics through the 1990s: An overview

NASA Technical Reports Server (NTRS)

1986-01-01

The volume details the interaction of physics and society, and presents a short summary of the progress in the major fields of physics and a summary of the other seven volumes of the Physics through the 1990s series, issues and recommended policy changes are described regarding funding, education, industry participation, small-group university research and large facility programs, government agency programs, and computer database needs. Three supplements report in detail on international issues in physics (the US position in the field, international cooperation and competition-especially on large projects, freedom for scientists, free flow of information, and education of foreign students), the education and supply of physicists (the changes in US physics education, employment and manpower, and demographics of the field), and the organization and support of physics (government, university, and industry research; facilities; national laboratories; and decision making). An executive summary contains recommendations for maintaining excellence in physics. A glossary of scientific terms is appended.

Health care reform and the pharmaceutical industry: crucial decisions are expected.

PubMed

Liberman, Aaron; Rubinstein, Jason

2002-03-01

For the past 30 years, the largest growing segment of the United States economy is the health care industry. The United States is in a transitional period as American citizens born between 1946 and 1964, the Baby Boomer generation, reach retirement age. In recent years, pharmaceutical costs have been rising faster than the inflation rate, leaving the American public to ask many questions. A major area of interest to policymakers regarding the health care reform agenda is patient spending on pharmaceutical items. Government-funded programs such as Medicare and Medicaid are facing the possibility of running out of funds and require substantive reform. Pharmaceuticals are not covered under the basic Medicare programs. As a result, senior citizens are forced to cover their prescription expenses out of pocket or purchase supplemental insurance plans. This extra expense is leaving many senior citizens across the country struggling to support their ongoing medical needs.

Space Station Engineering and Technology Development: Proceedings of the Panel on In-Space Engineering Research and Technology Development

NASA Technical Reports Server (NTRS)

1985-01-01

In 1984 the ad hoc committee on Space Station Engineering and Technology Development of the Aeronautics and Space Engineering Board (ASEB) conducted a review of the National Aeronautics and Space Administration's (NASA's) space station program planning. The review addressed the initial operating configuration (IOC) of the station. The ASEB has reconstituted the ad hoc committee which then established panels to address each specific related subject. The participants of the panels come from the committee, industry, and universities. The proceedings of the Panel on In Space Engineering Research and Technology Development are presented in this report. Activities, and plans for identifying and developing R&T programs to be conducted by the space station and related in space support needs including module requirements are addressed. Consideration is given to use of the station for R&T for other government agencies, universities, and industry.

R and D program for French sodium fast reactor: On the description and detection of sodium boiling phenomena during sub-assembly blockages

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vanderhaegen, M.; Laboratory of Waves and Acoustic, Institut Langevin, ESPCI ParisTech, 10 rue Vauquelin, 75005 Paris; Paumel, K.

2011-07-01

In support of the French ASTRID (Advanced Sodium Technological Reactor for Industrial Demonstration) reactor program, which aims to demonstrate the industrial applicability of sodium fast reactors with an increased level of safety demonstration and availability compared to the past French sodium fast reactors, emphasis is placed on reactor instrumentation. It is in this framework that CEA studies continuous core monitoring to detect as early as possible the onset of sodium boiling. Such a detection system is of particular interest due to the rapid progress and the consequences of a Total Instantaneous Blockage (TIB) at a subassembly inlet, where sodium boilingmore » intervenes in an early phase. In this paper, the authors describe all the particularities which intervene during the different boiling stages and explore possibilities for their detection. (authors)« less

ASK Magazine. No. 15

NASA Technical Reports Server (NTRS)

Laufer, Alexander (Editor); Post, Todd (Editor); Brady, Jody Lannen (Editor)

2003-01-01

WELCOME TO THE ACADEMY OF PROGRAM AND PROJECT Leadership (APPL) and ASK Magazine. APPL helps NASA managers and project teams accomplish today s missions and meet tomorrow s challenges by providing performance enhancement services and tools, supporting career development programs, sponsoring knowledge sharing events and publications, and creating opportu- nities for project management collaboration with univer- sities, professional associations, industry partners, and other government agencies. ASK Magazine grew out of APPL s Knowledge Sharing Initiative. The stories that appear in ASK are written by the best of the best project managers, primarily from NASA, but also from other government agencies and industry. In a mature view of the subject career development is not simply four years of college or a week at training, culminating in a diploma or a certificate to hang on an office wall. That s why we wanted to take a broad look at career development in this issue of ASK.

The Aeronautics Education, Research, and Industry Alliance (AERIAL) 2002 Report

NASA Technical Reports Server (NTRS)

Bowen, Brent D.; Box, Richard C.; Fink, Mary; Gogos, George; Lehrer, Henry R.; Narayanan, Ram M.; Nickerson, Jocelyn S.; Tarry, Scott E.; Vlasek, Karisa D.; O'Neil, Patrick D.

2002-01-01

The NASA Nebraska Space Grant Consortium (NSGC) & EPSCoR programs at the University of Nebraska at Omaha are involved in a variety of innovative research activities. Such research is supported through the Aeronautics Education, Research, and Industry Alliance (AERIAL) and collaborative seed funds. AERIAL is a comprehensive, multi-faceted, five year NASA EPSCoR initiative that contributes substantially to the strategic research and technology priorities of NASA while intensifying Nebraska s rapidly growing aeronautics research and development endeavors. AERIAL includes three major collaborative research teams (CRTs) whose nexus is a common focus in aeronautics research. Each CRT - Small Aircraft Transportation System (SATS), Airborne Remote Sensing for Agricultural Research and Commercialization Applications (ARS), and Numerical Simulation of the Combustion of Fuel Droplets: Finite Rate Kinetics and Flame Zone Grid Adaptation (CEFD) -has a distinct research agenda. This program provides the template for funding of new and innovative research that emphasizes aerospace technology.

NASA's commercial space program - Initiatives for the future

NASA Technical Reports Server (NTRS)

Rose, James T.; Stone, Barbara A.

1990-01-01

NASA's commercial development of the space program aimed at the stimulation and assistance of expanded private sector involvement and investment in civil space activities is discussed, focusing on major new program initiatives and their implementation. NASA's Centers for the Commercial Development of Space (CCDS) program, composed of competitively selected consortia of universities, industries, and government involved in early research and testing phases of potentially commercially viable technologies is described. The 16 centers concentrate on seven different technical areas such as automation and robotics; remote sensing; life sciences; and space power, propulsion, and structures. Private sector participation, CCDS technology development, government and commercially supplied access to space in support of CCDS programs, CCDS hardware development, and CCDS spinoffs are discussed together with various cooperative and reimbursable agreements between NASA and the private sector.

International market assessment of stand-alone photovoltaic power systems for cottage industry applications

NASA Astrophysics Data System (ADS)

Philippi, T. M.

1981-11-01

The final result of an international assessment of the market for stand-alone photovoltaic systems in cottage industry applications is reported. Nonindustrialized countries without centrally planned economies were considered. Cottage industries were defined as small rural manufacturers, employing less than 50 people, producing consumer and simple products. The data to support this analysis were obtained from secondary and expert sources in the U.S. and in-country field investigations of the Philippines and Mexico. The near-term market for photovoltaics for rural cottage industry applications appears to be limited to demonstration projects and pilot programs, based on an in-depth study of the nature of cottage industry, its role in the rural economy, the electric energy requirements of cottage industry, and a financial analysis of stand-alone photovoltaic systems as compared to their most viable competitor, diesel driven generators. Photovoltaics are shown to be a better long-term option only for very low power requirements. Some of these uses would include clay mixers, grinders, centrifuges, lathes, power saws and lighting of a workshop.

International market assessment of stand-alone photovoltaic power systems for cottage industry applications

NASA Technical Reports Server (NTRS)

Philippi, T. M.

1981-01-01

The final result of an international assessment of the market for stand-alone photovoltaic systems in cottage industry applications is reported. Nonindustrialized countries without centrally planned economies were considered. Cottage industries were defined as small rural manufacturers, employing less than 50 people, producing consumer and simple products. The data to support this analysis were obtained from secondary and expert sources in the U.S. and in-country field investigations of the Philippines and Mexico. The near-term market for photovoltaics for rural cottage industry applications appears to be limited to demonstration projects and pilot programs, based on an in-depth study of the nature of cottage industry, its role in the rural economy, the electric energy requirements of cottage industry, and a financial analysis of stand-alone photovoltaic systems as compared to their most viable competitor, diesel driven generators. Photovoltaics are shown to be a better long-term option only for very low power requirements. Some of these uses would include clay mixers, grinders, centrifuges, lathes, power saws and lighting of a workshop.

DOE-OTM Tribology Program semiannual progress report, October 1992--March 1993

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

The OTM Tribology Program supports applied research and exploratory development which private enterprise will not or cannot pursue, in specifically identified industrial problem areas pertaining to energy conservation in the transportation sector. Under the current Annual Operating Plan (AOP) the tribology project is structured to conform with the ongoing and planned research activities in three program elements: (1) advanced lubrication--experimental investigations of lubrication phenomena and the development of improved or novel lubricants and lubricant-delivery systems for current and advanced engine systems; (2) engineered tribological interfaces--research and development on various coating processes to modify the microstructure and chemical composition of near-surfacemore » regions in order to improve their friction and wear properties for use in advanced engine designs; (3) advanced tribomaterials and components--tribomaterials evaluation of the friction and wear behavior of newly emerging materials, particularly those promising low friction and wealth at elevated temperatures in advanced engine designs: and tribocomponents evaluation which focuses on development of models, analysis/design tools to enable US transportation industry to employ a tribology-by-design approach and dissemination of program developments to the US transportation industry. Project Management encompasses the administrative and managerial duties of planning, including assessments of application areas with significant tribological energy losses and opportunities for tribological advances in the transportation sector; program implementation, including the review of proposals, organization and conduct of RFP and/or ROA solicitations, selection of R and D projects; and the issues of contracts grants and purchase orders; monitoring of project activities: reporting, information exchange and technology transfer. The current organization of the tribology project, the lead responsibilities for each program element and the present contractors are shown in Table 1. Brief summaries of progress made in this are included.« less

Supporting a Diverse Community of Undergraduate Researchers in Satellite and Ground-Based Remote Sensing

NASA Astrophysics Data System (ADS)

Blake, R.; Liou-Mark, J.

2012-12-01

The U.S. remains in grave danger of losing its global competitive edge in STEM. To find solutions to this problem, the Obama Administration proposed two new national initiatives: the Educate to Innovate Initiative and the $100 million government/private industry initiative to train 100,000 STEM teachers and graduate 1 million additional STEM students over the next decade. To assist in ameliorating the national STEM plight, the New York City College of Technology has designed its NSF Research Experience for Undergraduate (REU) program in satellite and ground-based remote sensing to target underrepresented minority students. Since the inception of the program in 2008, a total of 45 undergraduate students of which 38 (84%) are considered underrepresented minorities in STEM have finished or are continuing with their research or are pursuing their STEM endeavors. The program is comprised of the three primary components. The first component, Structured Learning Environments: Preparation and Mentorship, provides the REU Scholars with the skill sets necessary for proficiency in satellite and ground-based remote sensing research. The students are offered mini-courses in Geographic Information Systems, MATLAB, and Remote Sensing. They also participate in workshops on the Ethics of Research. Each REU student is a member of a team that consists of faculty mentors, post doctorate/graduate students, and high school students. The second component, Student Support and Safety Nets, provides undergraduates a learning environment that supports them in becoming successful researchers. Special networking and Brown Bag sessions, and an annual picnic with research scientists are organized so that REU Scholars are provided with opportunities to expand their professional community. Graduate school support is provided by offering free Graduate Record Examination preparation courses and workshops on the graduate school application process. Additionally, students are supported by college counselors. Many of the students are first generation college students who often face issues that can impede their academic progress. The last component, Vision and Impetus for Advancement, allows REU Scholars to see themselves as STEM scientists and workforce professionals. Exposure trips provide students with an opportunity to meet scientists working in industry. Additionally, the students also present their research and participate at local, regional, and national conferences. Furthermore, since many of the students were never given the chance to visit STEM-focused industries and conferences. The program, therefore, helps to broaden their STEM experience. Of the 38 REU Scholars, 16%(6) of them are in graduate school in the STEM disciplines, 21%(8) of them have graduated and are in the STEM workforce, and 63%(24) of them continue to pursue their STEM degrees. Three of the students have won first place recognition for their research, and two of the students will be co-authors for two peer-review publications and one book chapter. Additionally, survey results show that 84% of the student participants now indicate interest in pursuing Master's degrees in STEM and 75% indicate interest in pursuing doctoral degrees in STEM. This program is supported by NSF REU grant #1062934.

Overview of the Integrated Programs for Aerospace Vehicle Design (IPAD) project

NASA Technical Reports Server (NTRS)

Venneri, S. L.

1983-01-01

To respond to national needs for improved productivity in engineering design and manufacturing, a NASA supported joint industry/government project is underway denoted Integrated Programs for Aerospace Vehicle Design (IPAD). The objective is to improve engineering productivity through better use of computer technology. It focuses on development of data base management technology and associated software for integrated company wide management of engineering and manufacturing information. Results to date on the IPAD project include an in depth documentation of a representative design process for a large engineering project, the definition and design of computer aided design software needed to support that process, and the release of prototype software to manage engineering information. This paper provides an overview of the IPAD project and summarizes progress to date and future plans.

Sino-American cooperation for rural electrification in China

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wallace, W.L.; Tsuo, Y.S.; Taylor, R.

1997-12-01

This paper discusses primarily two different renewable energy programs which are in progress in China. One is in Gansu province, based on a solar home system project. This project is stressing a sustainable market development, provision of small lighting systems for residential and small schools, and water pumping and telecommunications support. It seeks involvement of 600 households as a minimum over 18 months. The second project is a very aggressive renewable energy project in Inner Mongolia, where there are excellent wind and solar resources, and where there are already 110,000 small wind turbines installed, in addition to more than 9more » hybrid power systems for villages. These programs have major involvement from the Chinese government and industry, with some guidance and support from the USA.« less

Summer study postscript: A 1986 perspective

NASA Technical Reports Server (NTRS)

Harris, Philip R.

1992-01-01

Now that the National Commission on Space has set out bold goals and strategies for the American space program in the nest 50 years, how these visions can be turned into reality is examined. Since the Challenger tragedy and other space failures have brought about a crisis of confidence at NASA, innovations are necessary to rebuild public consensus and support. Initiatives by the private sector must promote the peaceful use of space by its exploration and industrialization. The faculty fellows from the 1984 summer study propose three possibilities for action by NASA and supporters of the space program. They are: A national lottery for space enterprises; A White House conference on space enterprise; and Reorganization of NASA. These ideas are briefly explored. and exploitation of space resources, such as on the asteroids and on Mars.

A cost-effective weight loss program at the worksite.

PubMed

Seidman, L S; Sevelius, G G; Ewald, P

1984-10-01

A major focus of Lockheed Missiles and Space Company's wellness program (Sunnyvale, Calif.) was to motivate weight loss in a cost-effective manner. The educationally based "Take It Off '83" campaign was created using the concepts of competition and self-responsibility. Seventy percent of the initial 2,499 participants completed the program, and 90% of these lost weight. Program completion rates and weight lost were higher for men than for women and higher for those who participated as team members rather than as individuals. Encouraging the formation of supportive/competitive teams proved to be a very effective means of promoting weight loss. The cost-effective motivation of weight loss in an industrial setting was accomplished successfully through this program (the cost to the company per initial participant was +5.40). Because of these results, the program will be repeated annually.

Sector-specific issues and reporting methodologies supporting the General Guidelines for the voluntary reporting of greenhouse gases under Section 1605(b) of the Energy Policy Act of 1992. Volume 1: Part 1, Electricity supply sector; Part 2, Residential and commercial buildings sector; Part 3, Industrial sector

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

DOE encourages you to report your achievements in reducing greenhouse gas emissions and sequestering carbon under this program. Global climate change is increasingly being recognized as a threat that individuals and organizations can take action against. If you are among those taking action, reporting your projects may lead to recognition for you, motivation for others, and synergistic learning for the global community. This report discusses the reporting process for the voluntary detailed guidance in the sectoral supporting documents for electricity supply, residential and commercial buildings, industry, transportation, forestry, and agriculture. You may have reportable projects in several sectors; you maymore » report them separately or capture and report the total effects on an entity-wide report.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hoehn, A.; Chamberlain, D.J.; Forsyth, S.W.

PGBA, a plant growth facility developed for space flight biotechnology research, successfully grew a total of 30 plants in a closed, multi-crop chamber for 10 days aboard the Space Shuttle Endeavor (STS-77). {ital Artemisia annua, Catharanthus roseus, Pinus taeda, Spinacia oleracea and Trifolium repens} were the five species studied during this mission. The primary mission objectives were to study the effects of microgravity for commercial and pharmaceutical production purposes. PGBA is a payload that represents a consortium of interests including BioServe Space Technologies (payload sponsor), NASA Ames Research Center (Controlled Ecological Life Support System, CELSS, Flight Program), Wisconsin Center formore » Space Automation and Robotics (WCSAR), and industrial affiliates (spaceflight effects on plants and formation of plant products such as pharmaceuticals). Although BioServe is responsible for the flight hardware development and integration of PGBA, NASA Ames, WSCAR and industrial affiliates provide significant hardware subsystems and technical biological expertise support. {copyright} {ital 1997 American Institute of Physics.}« less

The economic impact of prospective population changes in advanced industrial countries: an historical perspective.

PubMed

Easterlin, R A

1991-11-01

Demographic projections to the year 2050 for advanced industrial nations, implying low or negative population growth and a sharp rise in old age dependency, have created concerns about the long-term economic outlook in these countries. An analysis of these projections in the light of the demographic and economic experience of the past century raises doubt about these concerns. There is little empirical evidence that declining population growth has slowed the rate of economic growth. Although the burden of aged dependents will reach a new high, the projected total dependency rate is not out of line with prior experience. Thus, the ability of the working population to shoulder the burden of higher taxes to support programs for older dependents will be greater because of reduced needs to support younger dependents. This conclusion holds for a number of variant projections, the only clear exception being one that implies a mortality revolution at older ages.

Partnering at the National Laboratories: Catalysis as a Case Study

DOE Office of Scientific and Technical Information (OSTI.GOV)

JACKSON,NANCY B.

1999-09-14

The role of the national laboratories, particularly the defense program laboratories, since the end of the cold war, has been a topic of continuing debate. The relationship of national laboratories to industry spurred debate which ranged from designating the labs as instrumental to maintaining U.S. economic competitiveness to concern over the perception of corporate welfare to questions regarding the industrial globalization and the possibility of U.S. taxpayer dollars supporting foreign entities. Less debated, but equally important, has been the national laboratories' potential competition with academia for federal research dollars and discussions detailing the role of each in the national researchmore » enterprise.« less

Proceedings of the Twenty-First NASA Propagation Experiments Meeting (NAPEX XXI) and the Advanced Communications Technology Satellite (ACTS) Propagation Studies Miniworkshop

NASA Technical Reports Server (NTRS)

Golshan, Nasser (Editor)

1997-01-01

The NASA Propagation Experimenters (NAPEX) meeting is convened each year to discuss studies supported by the NASA Propagation Program. Representatives from the satellite communications industry, academia and government who have an interest in space-ground radio wave propagation are invited to NAPEX meetings for discussions and exchange of information. The reports delivered at this meeting by program managers and investigators present recent activities and future plans. This forum provides an opportunity for peer discussion of work in progress, timely dissemination of propagation results, and close interaction with the satellite communications industry. NAPEX XXI took place in El Segundo, California on June 11-12, 1997 and consisted of three sessions. Session 1, entitled "ACTS Propagation Study Results & Outcome " covered the results of 20 station-years of Ka-band radio-wave propagation experiments. Session 11, 'Ka-band Propagation Studies and Models,' provided the latest developments in modeling, and analysis of experimental results about radio wave propagation phenomena for design of Ka-band satellite communications systems. Session 111, 'Propagation Research Topics,' covered a diverse range of propagation topics of interest to the space community, including overviews of handbooks and databases on radio wave propagation. The ACTS Propagation Studies miniworkshop was held on June 13, 1997 and consisted of a technical session in the morning and a plenary session in the afternoon. The morning session covered updates on the status of the ACTS Project & Propagation Program, engineering support for ACTS Propagation Terminals, and the Data Center. The plenary session made specific recommendations for the future direction of the program.

Adult Literacy: Industry-Based Training Programs. Research and Development Series No. 265C.

ERIC Educational Resources Information Center

Fields, Ernest L.; And Others

Nine industry-based adult literacy programs across the country were studied to identify exemplary training programs and practices that business and industry trainers, planners, and policymakers and individuals in the public education sector alike could replicate in designing adult literacy programs. Training programs offered by the following…

Program of Studies: Trade and Industrial: Grades 9-12.

ERIC Educational Resources Information Center

Fairfax County Schools, VA.

Part 1 of the trade and industrial education curriculum guide for grades 9-12 contains a brief program overview and Vocational Industrial Clubs of America (VICA) description, more detailed descriptions of in-school and out-of-school programs and program classification methods, a list of references, and charts of various programs and training…

Organizational culture and knowledge management in the electric power generation industry

NASA Astrophysics Data System (ADS)

Mayfield, Robert D.

Scarcity of knowledge and expertise is a challenge in the electric power generation industry. Today's most pervasive knowledge issues result from employee turnover and the constant movement of employees from project to project inside organizations. To address scarcity of knowledge and expertise, organizations must enable employees to capture, transfer, and use mission-critical explicit and tacit knowledge. The purpose of this qualitative grounded theory research was to examine the relationship between and among organizations within the electric power generation industry developing knowledge management processes designed to retain, share, and use the industry, institutional, and technical knowledge upon which the organizations depend. The research findings show that knowledge management is a business problem within the domain of information systems and management. The risks associated with losing mission critical-knowledge can be measured using metrics on employee retention, recruitment, productivity, training and benchmarking. Certain enablers must be in place in order to engage people, encourage cooperation, create a knowledge-sharing culture, and, ultimately change behavior. The research revealed the following change enablers that support knowledge management strategies: (a) training - blended learning, (b) communities of practice, (c) cross-functional teams, (d) rewards and recognition programs, (e) active senior management support, (f) communication and awareness, (g) succession planning, and (h) team organizational culture.

Evaluation of the mandatory construction induction training program in Western Australia: unanticipated consequences.

PubMed

Bahn, Susanne; Barratt-Pugh, Llandis

2012-08-01

Since January 1, 2007, Government legislation in Western Australia required all workers in construction to complete mandatory safety awareness training before they began work on site. During the implementation of this new legislation there was considerable resistance from the construction sector due to the mandatory nature of the training. The construction industry viewed this as an unnecessary impost as they considered that there was already sufficient safety training delivered through individual company and site inductions. In 2010, we evaluated the new Construction Induction Training (CIT) in the commercial construction sector in Western Australia to find that since 2007 there has been an unanticipated change in support for the mandatory training. The 2010 study shows a shift in the values of the safety culture for the commercial sector of the construction industry. In 2010, the industry not only supports the mandatory CIT, but is very vocal in its request to re-institute the refresher courses that were withdrawn in 2009. Indeed, 79% of respondents claimed there were measurable benefits to their business having their employees complete the CIT, while 96% claimed the CIT assisted in reducing accidents/incidents on their worksites. This 2010 study indicates that in this case, mandatory training has had a positive effect on safety culture change and gradually reduced work-related injury in the industry since 2007 to the present. The paper uses data from two studies conducted in 2006 and 2010 to highlight the unanticipated change in perception of the value of mandatory safety training in the WA construction industry to one which is positive and supportive. Crown Copyright © 2011. Published by Elsevier Ltd. All rights reserved.

Kickstarting a New Era of Lunar Industrialization via Campaign of Lunar COTS Missions

NASA Technical Reports Server (NTRS)

Zuniga, Allison F.; Turner, Mark; Rasky, Daniel; Pittman, Robert B.; Zapata, Edgar

2016-01-01

To support the goals of expanding our human presence and current economic sphere beyond LEO, a new plan was constructed for NASA to enter into partnerships with industry to foster and incentivize a new era of lunar industrialization. For NASA to finally be successful in achieving sustainable human exploration missions beyond LEO, lessons learned from our space history have shown that it is essential for current program planning to include affordable and economic development goals as well as address top national priorities to obtain much needed public support. In the last 58 years of NASA's existence, only Apollo's human exploration missions beyond LEO were successful since it was proclaimed to be a top national priority during the 1960's. However, the missions were not sustainable and ended abruptly in 1972 due to lack of funding and insufficient economic gain. Ever since Apollo, there have not been any human missions beyond LEO because none of the proposed program plans were economical or proclaimed a top national priority. The proposed plan outlines a new campaign of low-cost, commercial-enabled lunar COTS (Commercial Orbital Transfer Services) missions which is an update to the Lunar COTS plan previously described. The objectives of this new campaign of missions are to prospect for resources, determine the economic viability of extracting those resources and assess the value proposition of using these resources in future exploration architectures such as Mars. These missions would be accomplished in partnership with commercial industry using the wellproven COTS Program acquisition model. This model proved to be very beneficial to both NASA and its industry partners as NASA saved significantly in development and operational costs, as much as tenfold, while industry partners successfully expanded their market share and demonstrated substantial economic gain. Similar to COTS, the goals for this new initiative are 1) to develop and demonstrate cost-effective, cis-lunar commercial services, such as lunar transportation, lunar mining and lunar ISRU operations; 2) enable development of an affordable and economical exploration architecture for future missions to Mars and beyond; and 3) to incentivize the creation of new lunar markets through use of lunar resources for economic benefit to NASA, commercial industry and the international community. These cost-effective services would not only enable NASA to economically and sustainably achieve its human exploration missions to the Moon, Mars and beyond but it would also kickstart a new era of lunar industrialization. This paper will describe the goals, objectives and approach for implementing this new campaign of missions. It will also describe the potential benefits and progress that can be accomplished with these low-cost, Lunar COTS missions. Lastly, a preliminary economic analysis approach is proposed for understanding the cost and potential return on investment in the use of lunar resources to reach the goal of lunar industrialization and an expanded and sustainable human presence into cis-lunar space and beyond.

Air Transport and Travel Industry Training Board

ERIC Educational Resources Information Center

Industrial Training Journal, 1974

1974-01-01

Seeing its role as one of stimulating, guiding, and coordinating training activities rather than providing central training facilities, three programs have been developed by the Air Transport and Travel Industry Training Board: (1) an occupational program, (2) a company program, and (3) an industry program. (MW)

Fourth Annual HEDS-UP Forum

NASA Technical Reports Server (NTRS)

Johnson, Kathleen M. (Editor)

2001-01-01

The HEDS-UP (Human Exploration and Development of Space-University Partners) program was instituted to build new relationships between university, faculty, students, and NASA in support of the Human Exploration and Development of Space. The program has provided a mechanism for university students to explore problems of interest to NASA through student engineering design projects, led by a university professor or mentor, and aided by the HEDS-UP staff. HEDS-UP program management advised teams on the selection of projects that were aligned with the goals of the HEDS strategic enterprise, and provided contacts with NASA and industry professionals who served as mentors. Students became acquainted with objectives, strategies, development issues, and technological characteristics of space exploration programs. In doing so, they prepared themselves for future engineering challenges, often discovering that the program was on their critical path to professional advancement. Many of the ideas were innovative and of interest to NASA. Industry benefitted from HEDS-UP as a mechanism to converge with talented students about to enter the work force. In addition, universities became more involved in the teaching of space exploration, and students were encouraged and mentored as they included education outreach as an element in their work. This in turn highlighted their performance to others and universities in their communities.

Center for Nanoscale Science and Technology

National Institute of Standards and Technology Data Gateway

NIST Center for Nanoscale Science and Technology (Program website, free access)   Currently there is no database matching your keyword search, but the NIST Center for Nanoscale Science and Technology website may be of interest. The Center for Nanoscale Science and Technology enables science and industry by providing essential measurement methods, instrumentation, and standards to support all phases of nanotechnology development, from discovery to production.

The MICROBE Project, A Report from the Interagency Working Group on Microbial Genomics

DTIC Science & Technology

2001-01-01

including targeting of genes related to pathogenesis, possibilities for acquired pathogen resistance, industrial and food -grade enzymes, and probiotics ...safety, food security, biotechnology, value-added products , human nutrition and functional foods , plant and animal protection and furthering fundamental...supports a number of microbial studies, which are integral components of the USDA national programs in animal health, food animal production , food

Citizen Science as a Tool for Scientific Research and Societal Benefit at NASA

NASA Technical Reports Server (NTRS)

Kaminski, Amy

2018-01-01

NASA's strategic goals include advancing knowledge and opportunity in space and improving life on Earth. We support these goals through extensive programs in space and Earth science research accomplished via space-based missions and research funding. NASA's "system" is configured to conduct science using (1) in-house personnel and (2) grants, contracts, and agreements with external entities (academia, industry, international space agencies.

Dont Leave Me Hanging on the Anglophone: The Potential for Online Distance Higher Education in the Asia-Pacific Region

ERIC Educational Resources Information Center

Marginson, Simon

2004-01-01

In the last decade there have been many attempts to mount online distance higher education programs on a global scale, led by the e-learning industry and university companies and consortia, some with government support: e.g. Universitas 21 Global, Cardean University, Fathom, NYUOnline and the UKe-University. A primary commercial objective has been…