Science.gov

Sample records for industries part ii

  1. Globalization in the pharmaceutical industry, Part II.

    PubMed

    Casadio Tarabusi, C; Vickery, G

    1998-01-01

    This is the second of a two-part report on the pharmaceutical industry. Part II begins with a discussion of foreign direct investment and inter-firm networks, which covers international mergers, acquisitions, and minority participation; market shares of foreign-controlled firms; international collaboration agreements (with a special note on agreements in biotechnology); and licensing agreements. The final section of the report covers governmental policies on health and safety regulation, price regulation, industry and technology, trade, foreign investment, protection of intellectual property, and competition.

  2. Water Pollution: Part I, Municipal Wastewaters; Part II, Industrial Wastewaters.

    ERIC Educational Resources Information Center

    Fowler, K. E. M.

    This publication is an annotated bibliography of municipal and industrial wastewater literature. This publication consists of two parts plus appendices. Part one is entitled Municipal Wastewaters and includes publications in such areas as health effects of polluted waters, federal policy and legislation, biology and chemistry of polluted water,…

  3. A STUDY OF THE LUMBER INDUSTRY IN IDAHO, PART II.

    ERIC Educational Resources Information Center

    LOUDERMILK, KENNETH M.

    A MORE FORMAL STUDY OF THE LUMBER INDUSTRY (SEE VT 002 152 AND VT 002 153) RESULTED IN IMPRESSIONS OF THE WORKERS AND WORKING CONDITIONS. THERE ARE TWO GENERAL TYPES OF EMPLOYEE--(1) THOSE VIEWING LUMBERING AS STOPGAP EMPLOYMENT WHICH SERVES AS A SOURCE OF WAGES FOR EDUCATIONAL PURPOSES OR AS AN INTERIM JOB WHILE BETTER EMPLOYMENT IS SOUGHT, AND…

  4. Industry Wage Surveys: Banking and Life Insurance, December 1976. Part I--Banking. Part II--Life Insurance. Bulletin 1988.

    ERIC Educational Resources Information Center

    Barsky, Carl

    This report presents the results of a survey conducted by the Bureau of Labor Statistics to determine wages and related benefits in (1) the banking industry and (2) for employees in home offices and regional head offices of life insurance carriers. Part 1 discusses banking industry characteristics and presents data for tellers and selected…

  5. Industry Wage Surveys: Banking and Life Insurance, December 1976. Part I--Banking. Part II--Life Insurance. Bulletin 1988.

    ERIC Educational Resources Information Center

    Barsky, Carl

    This report presents the results of a survey conducted by the Bureau of Labor Statistics to determine wages and related benefits in (1) the banking industry and (2) for employees in home offices and regional head offices of life insurance carriers. Part 1 discusses banking industry characteristics and presents data for tellers and selected…

  6. 2012 in review - part II: overcoming the obstacles in the pharma/biotech industry.

    PubMed

    Rabasseda, X; Dulsat, C; Navarro, D; Cruces, E; Graul, A I; Jago, C; Tracy, M

    2013-02-01

    As highlighted in the first part of this review published last month, the year 2012 saw the approval of a remarkable number of new drugs, and among the new drugs reaching the market, a significant proportion were orphan drugs developed for treating less prevalent diseases. These drugs are certainly not expected to become blockbusters, but are of high interest because of their efficacy in a narrow spectrum of patients. This trend aligns with the general tendency of staying away from fit-for-all blockbusters into personalized medicine as one of the strategies for overcoming the patent cliff that resulted in a long list of drugs going off patent and being approved as generics also during last year. The emerging scenario resulting from new developments in the form of new drugs and biosimilars and newly available generic medications paralleled by strategic movements within the pharmaceutical industry to reinforce their position in the market, as reflected by merger and acquisition deals accompanied by significant efforts into prioritization resulting in spin-off and split transactions, is reviewed in this second part. This paper includes a significant amount of data in tables for quick review and to profile the new strategic movements in drug pipelines. Further information, including details on mechanisms of action, current status, itemized pharmacology, pharmacokinetic and clinical trial research findings and updated information can be found in the proprietary databases Thomson Reuters Integrity(SM) and Thomson Reuters Cortellis™.

  7. Dental laboratory technology in crisis, part II: Potential solutions to the challenges facing the industry.

    PubMed

    Christensen, Gordon J; Yancey, William

    2005-06-01

    The dental laboratory industry appears to need immediate change to face many challenges, the four most significant of which are described in this column and in our column in May JADA. The first article on this subject described the current challenges facing the laboratory industry, as determined by conference attendees representing all aspects of the dental industry and related professions. This article reports on the suggestions made by attendees of this conference to solve the identified challenges.

  8. The Reproductive Ecology of Industrial Societies, Part II : The Association between Wealth and Fertility.

    PubMed

    Stulp, Gert; Sear, Rebecca; Schaffnit, Susan B; Mills, Melinda C; Barrett, Louise

    2016-12-01

    Studies of the association between wealth and fertility in industrial populations have a rich history in the evolutionary literature, and they have been used to argue both for and against a behavioral ecological approach to explaining human variability. We consider that there are strong arguments in favor of measuring fertility (and proxies thereof) in industrial populations, not least because of the wide availability of large-scale secondary databases. Such data sources bring challenges as well as advantages, however. The purpose of this article is to illustrate these by examining the association between wealth and reproductive success in the United States, using the National Longitudinal Study of Youth 1979. We conduct a broad-based exploratory analysis of the relationship between wealth and fertility, employing both cross-sectional and longitudinal approaches, and multiple measures of both wealth (income and net worth) and fertility (lifetime reproductive success and transitions to first, second and third births). We highlight the kinds of decisions that have to be made regarding sample selection, along with the selection and construction of explanatory variables and control measures. Based on our analyses, we find a positive effect of both income and net worth on fertility for men, which is more pronounced for white men and for transitions to first and second births. Income tends to have a negative effect on fertility for women, while net worth is more likely to positively predict fertility. Different reproductive strategies among different groups within the same population highlight the complexity of the reproductive ecology of industrial societies. These results differ in a number of respects from other analyses using the same database. We suggest this reflects the impossibility of producing a definitive analysis, rather than a failure to identify the "correct" analytical strategy. Finally, we discuss how these findings inform us about (mal)adaptive decision-making.

  9. Laser-induced breakdown spectrometry in jewellery industry. Part II: quantitative characterisation of goldfilled interface.

    PubMed

    Jurado-López, A; Luque de Castro, M D

    2003-02-06

    A new application of laser-induced breakdown spectrometry (LIBS) and multivariate data analysis, namely partial least-squares regression (PLS) in the jewellery industry is reported. The method was designed for the quantitative characterisation of the interface of goldfilled, a material widely used in costume jewellery fabrication, by monitoring the emission lines of the elements present in the sample, while subjecting the piece to a number of laser pulses. The method also provides quantitative information about the composition of a given layer of the material of a special interest at the interface in order to know the existence of diffusion phenomena.

  10. Mycotoxins revisited: Part II.

    PubMed

    Berger, Kyan J; Guss, David A

    2005-02-01

    Mushrooms are ubiquitous in nature. They are an important source of nutrition, however, certain varieties contain chemicals that can be highly toxic to humans. Industrially cultivated mushrooms are historically very safe, whereas foraging for mushrooms or accidental ingestion of mushrooms in the environment can result in serious illness and death. The emergency department is the most common site of presentation for patients suffering from acute mushroom poisoning. Although recognition can be facilitated by identification of a characteristic toxidrome, the presenting manifestations can be variable and have considerable overlap with more common and generally benign clinical syndromes. The goal of this two-part article is to review the knowledge base on this subject and provide information that will assist the clinician in the early consideration, diagnosis and treatment of mushroom poisoning. Part I reviewed the epidemiology and demographics of mushroom poisoning, the physical characteristics of the most toxic varieties, the classification of the toxic species, and presented an overview of the cyclopeptide-containing mushroom class. Part II is focused on the presentation of the other classes of toxic mushrooms along with an up-to-date review of the most recently identified poisonous varieties.

  11. Dissecting Diversity Part II

    ERIC Educational Resources Information Center

    Matthews, Frank

    2005-01-01

    This article presents "Dissecting Diversity, Part II," the conclusion of a wide-ranging two-part roundtable discussion on diversity in higher education. The participants were as follows: Lezli Baskerville, J.D., President and CEO of the National Association for Equal Opportunity (NAFEO); Dr. Gerald E. Gipp, Executive Director of the…

  12. Dissecting Diversity Part II

    ERIC Educational Resources Information Center

    Matthews, Frank

    2005-01-01

    This article presents "Dissecting Diversity, Part II," the conclusion of a wide-ranging two-part roundtable discussion on diversity in higher education. The participants were as follows: Lezli Baskerville, J.D., President and CEO of the National Association for Equal Opportunity (NAFEO); Dr. Gerald E. Gipp, Executive Director of the…

  13. A Moral (Normative) Framework for the Judgment of Actions and Decisions in the Construction Industry and Engineering: Part II.

    PubMed

    Alkhatib, Omar J

    2016-12-02

    The construction industry is typically characterized as a fragmented, multi-organizational setting in which members from different technical backgrounds and moral values join together to develop a particular business or project. The most challenging obstacle in the construction process is to achieve a successful practice and to identify and apply an ethical framework to manage the behavior of involved specialists and contractors and to ensure the quality of all completed construction activities. The framework should reflect a common moral ground for myriad people involved in this process to survive and compete ethically in today's turbulent construction market. This study establishes a framework for moral judgment of behavior and actions conducted in the construction process. The moral framework provides the basis of judging actions as "moral" or "immoral" based on three levels of moral accountability: personal, professional, and social. The social aspect of the proposed framework is developed primarily from the essential attributes of normative business decision-making models identified in the literature review and subsequently incorporates additional attributes related to professional and personal moral values. The normative decision-making models reviewed are based primarily on social attributes as related to moral theories (e.g., utilitarianism, duty, rights, virtue, etc.). The professional and moral attributes are established by identifying a set of common moral values recognized by professionals in the construction industry and required to prevent common construction breaches. The moral framework presented here is the complementary part of the ethical framework developed in Part I of this article and is based primarily on the personal behavior or the moral aspect of professional responsibility. The framework can be implemented as a form of preventive personal ethics, which would help avoid ethical dilemmas and moral implications in the first place

  14. Globalization in the pharmaceutical industry, Part I.

    PubMed

    Casadio Tarabusi, C; Vickery, G

    1998-01-01

    This report on the pharmaceutical industry will be published in two parts. Part I begins with a summary of the study and its conclusions. The authors then provide an overview of the characteristics of the industry and current trends in its growth and structure: production and consumption, employment, research and development, capital investment, firm and product concentration and product competition, and pricing. A discussion of international trade follows, covering intra- and inter-regional, intra-firm, and intra-industry trade. The report will continue in the next issue of the Journal (Part II) with a look at foreign direct investment, inter-firm networks, and governmental policies.

  15. America's Nomads (Part II).

    ERIC Educational Resources Information Center

    Zimmerman, Diana

    1981-01-01

    Evidence suggests that living and labor conditions have improved very little among agricultural laborers and are particularly hopeless among migrants. Since the government, food producers, industry, and consumers are all beneficiaries of the present farm system, it is unlikely that farm workers will be able to unionize and control their own…

  16. Rickets: Part II.

    PubMed

    Shore, Richard M; Chesney, Russell W

    2013-01-01

    This is the continuation of a two-part review of rickets. This part emphasizes the specific pathophysiology, clinical features, pathoanatomy and radiographic findings of vitamin D deficiency rickets. Other forms of rickets, differential diagnostic considerations and the potential relationship between low levels of vitamin D metabolites and unexplained fractures in infants are also discussed.

  17. AERMOD: A DISPERSION MODEL FOR INDUSTRIAL SOURCE APPLICATIONS PART II: MODEL PERFORMANCE AGAINST 17 FIELD STUDY DATABASES

    EPA Science Inventory

    The formulations of the AMS/EPA Regulatory Model Improvement Committee's applied air dispersion model (AERMOD) are described. This is the second in a series of three articles. Part I describes the model's methods for characterizing the atmospheric boundary layer and complex ter...

  18. AERMOD: A DISPERSION MODEL FOR INDUSTRIAL SOURCE APPLICATIONS PART II: MODEL PERFORMANCE AGAINST 17 FIELD STUDY DATABASES

    EPA Science Inventory

    The formulations of the AMS/EPA Regulatory Model Improvement Committee's applied air dispersion model (AERMOD) are described. This is the second in a series of three articles. Part I describes the model's methods for characterizing the atmospheric boundary layer and complex ter...

  19. Understanding Math - Part II.

    ERIC Educational Resources Information Center

    Wyks, Hollis W.; Austin, Robert J.

    This is the second remedial workbook-text in a two-part series written for deaf students at the secondary level. It covers fractions, geometry formulas, decimals and percents, and time. For the first workbook, see SE 015 827, and for the teacher's guide, see SE 015 829. (DT)

  20. Rockets -- Part II.

    ERIC Educational Resources Information Center

    Leitner, Alfred

    1982-01-01

    If two rockets are identical except that one engine burns in one-tenth the time of the other (total impulse and initial fuel mass of the two engines being the same), which rocket will rise higher? Why? The answer to this question (part 1 response in v20 n6, p410, Sep 1982) is provided. (Author/JN)

  1. Rockets -- Part II.

    ERIC Educational Resources Information Center

    Leitner, Alfred

    1982-01-01

    If two rockets are identical except that one engine burns in one-tenth the time of the other (total impulse and initial fuel mass of the two engines being the same), which rocket will rise higher? Why? The answer to this question (part 1 response in v20 n6, p410, Sep 1982) is provided. (Author/JN)

  2. Stimulus control: Part II

    PubMed Central

    Dinsmoor, James A.

    1995-01-01

    The second part of my tutorial stresses the systematic importance of two parameters of discrimination training: (a) the magnitude of the physical difference between the positive and the negative stimulus (disparity) and (b) the magnitude of the difference between the positive stimulus, in particular, and the background stimulation (salience). It then examines the role these variables play in such complex phenomena as blocking and overshadowing, progressive discrimination training, and the transfer of control by fading. It concludes by considering concept formation and imitation, which are important forms of application, and recent work on equivalence relations. PMID:22478222

  3. Local Area Networks: Part II.

    ERIC Educational Resources Information Center

    Dessy, Raymond E., Ed.

    1982-01-01

    Discusses five approaches used by industry/colleges to provide local area network (LAN) capabilities in the analytical laboratory: (1) mixed baseband bus network coupled to a star net; (2) broadband bus network; (3) ring network; (4) star network coupled to broadband net; and (5) simple multiprocessor center. Part I (September issue) focused on…

  4. Exposure of UK industrial plumbers to asbestos, Part II: Awareness and responses of plumbers to working with asbestos during a survey in parallel with personal sampling.

    PubMed

    Bard, Delphine; Burdett, Garry

    2007-03-01

    Throughout the European Union, millions tonnes of asbestos were used in the manufacture of products for building and for industrial installations. Today, in the UK, it is estimated that over half a million non-domestic premises alone have asbestos-containing materials in them and it is recognized that those working in building maintenance trades continue to be at significant risk. In part II, the awareness of UK plumbers to when they are working with asbestos was investigated and compared with the monitored levels reported in part I. The plumbers were issued by post with passive samplers, activity logs to monitor a working week and a questionnaire. The activity logs were used to assess whether maintenance workers were knowingly or unknowingly exposed to airborne asbestos fibres during a course of a working week. The questionnaire was designed to gather information on their: age, employment status, current and past perception of the frequency which they work with asbestos and knowledge of the precautions that should be taken to limit exposure and risk. Approximately 20% of workers reported on the sample log that they had worked with asbestos. There was a high correlation (93%) between the sampling log replies that they were knowingly working with asbestos and measured asbestos on the passive sampler. However, some 60% of the samples had >5 microm long asbestos structures found by transmission electron microscopy (TEM) analysis suggesting that the plumbers were aware of about only one-third of their contacts with asbestos materials throughout the week. This increased to just over one half of the plumbers being aware of their contact based on the results for phase contrast microscopy (PCM) countable asbestos fibres. The results from the questionnaire found that over half of the plumbers replying thought that they disturb asbestos only once a year and 90% of them thought they would work with asbestos for<10 h year-1. Their expectations and awareness of work with

  5. Study on mechanics of bodies under the action of sound pollution in industrial halls. Part II: Analysis of sound pressure inside the hall

    NASA Astrophysics Data System (ADS)

    Arghir, M.; Lăpuşan, I. L.

    2016-08-01

    In this work, it is taking into account all these phenomena of sounds propagation in given space. Within the framework of the given research is a study in industrial park "Teraplast" from Bistriţa-Năsăud county. This is industrial products for pvc constructions. From the submissions made to the workshops of processing industrial park "Teraplast" has been found, that noise is produced mainly in the power pumps hall. The registrations were made during a normal working days. The recorders made, for one minute, with recorder (NL32, Japanese society RION) in the pump's hall 12 positions were introduced in a high- capacity computer. This second part of the paper contains a natural continuation of the study conducted in the first part. Through the composition of sound waves for each pump in part according to the construction of the hall, gives the sound field generated by sources of power pumps during simultaneous operation. Field of noise sources inside the hall of power pumps determines an acoustic pressure on the walls of the hall. Taking into consideration the frequencies that are threatening the construction of the hall, will be presented successively acoustic pressure what special expertise to the hall walls the pressures of 230Hz, 350Hz, 800Hz and 1400Hz. This study is important for the acoustic pressure made from the "Teraplast" enterprise inside, and outside the halls.

  6. Exploring Water Pollution. Part II

    ERIC Educational Resources Information Center

    Rillo, Thomas J.

    1975-01-01

    This is part two of a three part article related to the science activity of exploring environmental problems. Part one dealt with background information for the classroom teacher. Presented here is a suggested lesson plan on water pollution. Objectives, important concepts and instructional procedures are suggested. (EB)

  7. Exploring Water Pollution. Part II

    ERIC Educational Resources Information Center

    Rillo, Thomas J.

    1975-01-01

    This is part two of a three part article related to the science activity of exploring environmental problems. Part one dealt with background information for the classroom teacher. Presented here is a suggested lesson plan on water pollution. Objectives, important concepts and instructional procedures are suggested. (EB)

  8. Using a source-receptor approach to characterise VOC behaviour in a French urban area influenced by industrial emissions. Part II: source contribution assessment using the Chemical Mass Balance (CMB) model.

    PubMed

    Badol, Caroline; Locoge, Nadine; Galloo, Jean-Claude

    2008-01-25

    In Part I of this study (Badol C, Locoge N, Leonardis T, Gallo JC. Using a source-receptor approach to characterise VOC behaviour in a French urban area influenced by industrial emissions, Part I: Study area description, data set acquisition and qualitative data analysis of the data set. Sci Total Environ 2007; submitted as companion manuscript.) the study area, acquisition of the one-year data set and qualitative analysis of the data set have been described. In Part II a source profile has been established for each activity present in the study area: 6 profiles (urban heating, solvent use, natural gas leakage, biogenic emissions, gasoline evaporation and vehicle exhaust) have been extracted from literature to characterise urban sources, 7 industrial profiles have been established via canister sampling around industrial plants (hydrocarbon cracking, oil refinery, hydrocarbon storage, lubricant storage, lubricant refinery, surface treatment and metallurgy). The CMB model is briefly described and its implementation is discussed through the selection of source profiles and fitting species. Main results of CMB modellings for the Dunkerque area are presented. (1) The daily evolution of source contributions for the urban wind sector shows that the vehicle exhaust source contribution varies between 40 and 55% and its relative increase at traffic rush hours is hardly perceptible. (2) The relative contribution of vehicle exhaust varies from 55% in winter down to 30% in summer. This decrease is due to the increase of the relative contribution of hydrocarbon storage source reaching up to 20% in summer. (3) The evolution of source contributions with wind directions has confirmed that in urban wind sectors the contribution of vehicle exhaust dominate with around 45-55%. For the other wind sectors that include some industrial plants, the contribution of industrial sources is around 60% and could reach 80% for the sector 280-310 degrees , which corresponds to the most dense

  9. Expertise revisited, Part II: Contributory expertise.

    PubMed

    Collins, Harry; Evans, Robert; Weinel, Martin

    2016-04-01

    In Part I of this two part paper we tried to elicit the 'essence' of the notion of interactional expertise by looking at its origins. In Part II we will look at the notion of contributory expertise. The exercise has been triggered by recent discussion of these concepts in this journal by Plaisance and Kennedy and by Goddiksen.

  10. Roots/Routes: Part II

    ERIC Educational Resources Information Center

    Swanson, Dalene M.

    2009-01-01

    This narrative acts as an articulation of a journey of many routes. Following Part I of the same research journey of rootedness/routedness, it debates the nature of transformation and transcendence beyond personal and political paradoxes informed by neoliberalism and related repressive globalizing discourses. Through a more personal, descriptive,…

  11. Roots/Routes: Part II

    ERIC Educational Resources Information Center

    Swanson, Dalene M.

    2009-01-01

    This narrative acts as an articulation of a journey of many routes. Following Part I of the same research journey of rootedness/routedness, it debates the nature of transformation and transcendence beyond personal and political paradoxes informed by neoliberalism and related repressive globalizing discourses. Through a more personal, descriptive,…

  12. Playing It Safe: Part II.

    ERIC Educational Resources Information Center

    Penman, Kenneth A.; Niccolai, Frances R.

    1985-01-01

    Explains how to prevent outdoor sports injuries; discusses related litigation and specific cases involving playing field turf, tennis, skiing, and pools; and sets out facility design and maintenance considerations and recommendations. A sidebar provides information about injury insurance available to NCAA schools. Part I of this article appeared…

  13. Understanding Radiation Thermometry. Part II

    NASA Technical Reports Server (NTRS)

    Risch, Timothy K.

    2015-01-01

    This document is a two-part course on the theory and practice of radiation thermometry. Radiation thermometry is the technique for determining the temperature of a surface or a volume by measuring the electromagnetic radiation it emits. This course covers the theory and practice of radiative thermometry and emphasizes the modern application of the field using commercially available electronic detectors and optical components. The course covers the historical development of the field, the fundamental physics of radiative surfaces, along with modern measurement methods and equipment.

  14. [Part II: Recognising facial expressions].

    PubMed

    Krolak-Salmon, P; Hénaff, M A; Bertrand, O; Vighetto, A; Mauguière, F

    2006-11-01

    In this second part, we address particularly the question of the neural mechanisms and structures involved in the recognition of facial emotional expressions that are crucial in social cognition. Emotion recognition in others can be critically impaired in some neurodegenerative and neurovascular diseases. That dysfunction sometimes correlated to disabling behavioural disorders and interpersonal communication impairment must be further understood. The results of a series of scalp and intracranial event related potential recordings, as well as recent advances in the literature, are reported. ERPs to facial emotional expressions were thus recorded in multiple subcortical and cortical areas in drug refractory epileptical patients implanted with depth electrodes. The roles of amygdala, insula and prefrontal cortex located at crossroads between perceptive analysis and emotional conceptual knowledge are particularly underlined. Altogether, these studies demonstrate that facial expressions are widely processed in space and time, some structures reacting very early and automatically, others providing a sustained reaction depending on the attention.

  15. Revenue cycle management, Part II.

    PubMed

    Crew, Matt

    2007-01-01

    The proper management of your revenue cycle requires the application of "best practices" and the continual monitoring and measuring of the entire cycle. The correct technology will enable you to gain the insight and efficiencies needed in the ever-changing healthcare economy. The revenue cycle is a process that begins when you negotiate payor contracts, set fees, and schedule appointments and continues until claims are paid in full. Every single step in the cycle carries equal importance. Monitoring all phases and a commitment to continually communicating the results will allow you to achieve unparalleled success. In part I of this article, we explored the importance of contracting, scheduling, and case management as well as coding and clinical documentation. We will now take a closer look at the benefits charge capture, claim submission, payment posting, accounts receivable follow-up, and reporting can mean to your practice.

  16. Sports Concussion Management: part II.

    PubMed

    Terrell, Thomas R; Cox, Conrad B; Bielak, Ken; Casmus, Robert; Laskowitz, Daniel; Nichols, Gregory

    2014-02-01

    Millions of concussions occur every year in the United States. The public interest in concussion has increased after a number of high-profile deaths in high school athletes from sports-related head trauma and in some professional athletes from chronic traumatic encephalopathy. One of the most active areas of research in sports medicine during the last decade has been the evaluation and management of concussion. In this second article of a two-part series, we provide an overview of the latest scientific advances in concussion research. This overview includes an update on the pathobiological changes that occur during concussion and the results of biomechanical studies. In addition, to aid the practicing clinician, we review the literature on proven and currently studied concussion risk factors, including a history of concussion, fatigue, and age. Genetic polymorphisms and biomarkers may provide risk-prediction capability, but at present the research remains inconclusive. Diffusion tensor imaging and functional magnetic resonance imaging are promising technologies that reveal more sophisticated data about the impact of concussion on the brain. We review the existing literature on the application of these neuroimaging modalities to sports concussion. An update from the Fourth International Conference on Concussion in Sport, with highlights of new recommendations, and the presentation of the third edition of the Sports Concussion Assessment Tool to evaluate acute concussion, concludes our review.

  17. Laser repairing of parts in metallurgical industries

    NASA Astrophysics Data System (ADS)

    Yang, Xichen; Wang, Yunshan; Zhao, Xin

    1999-09-01

    A new repair system for hardfacing of parts in metallurgical industries has been developed. The system can produce single pass quenching or cladding width of 10 - 35 mm, thickness of 0.5 - 10 mm. The wide range of powder materials can be deposited to provide hardfacing layers against wear, corrosion and oxidation. Comparing with welding and flame spraying, it presents clear advantages with low distortion, low dilution, low cost and small postclad machining. It has been successfully used to repair some of parts, for example, roll, drawing wire wheel in high speed wire, and so on.

  18. Tubing extrusion made easier, Part II.

    PubMed

    Ferrandino, Mike

    2004-11-01

    An increased understanding of the primary elements will lead to greater control of the extrusion process. In the ongoing quest to produce tubing with consistent properties. Part II of this two-part article makes recommendations on best practice in barrel and screw design, compression ratios and dies.

  19. Unlearning Established Organizational Routines--Part II

    ERIC Educational Resources Information Center

    Fiol, C. Marlena; O'Connor, Edward J.

    2017-01-01

    Purpose: The purpose of Part II of this two-part paper is to uncover important differences in the nature of the three unlearning subprocesses, which call for different leadership interventions to motivate people to move through them. Design/methodology/approach: The paper draws on research in behavioral medicine and psychology to demonstrate that…

  20. New Raman spectrometer using a digital micromirror device and a photomultiplier tube detector for rapid on-line industrial analysis. Part II: Choice of analytical methods.

    PubMed

    Quyen, Nguyen The; Jouan, Michel D; Dao, Nguyen Quy; Da Silva, Edouard; Ai Phuong, Duong

    2008-03-01

    In this paper, the performances of four improved analytical methods (backward stepwise selection of peak intensities, sum of characteristic peaks of a component, moving window partial least squares, and genetic algorithms) using wavelength selection for the analysis of xylene mixtures by Raman spectroscopy are tested for further use on the new "digital micromirror device associated with a photomultiplier tube" Raman spectrometer. It is shown that the errors of prediction using only a few selected points (from 4 to 49 depending on the method) are almost the same as when using the whole spectral range (1050 points). Compared to the last two methods, the "backward stepwise selection of peak intensities" and "sum of characteristic peaks of a component" methods are robust under industrial conditions and appear to be well suited for chemical quantitative analysis with the new Raman spectrometer, which allows the measurements of the total intensity to be made simultaneously for a number of pre-selected frequencies. Results show that the errors of prediction can be near to or even lower than 2%.

  1. Epilepsy Care in Developing Countries: Part II of II

    PubMed Central

    Birbeck, Gretchen L

    2010-01-01

    Although 80% of people with epilepsy reside in resource poor, developing countries, epilepsy care in these regions remains limited and the majority of epilepsy patients go untreated. Cost-effective, sustainable epilepsy care services, delivering first-line antiepileptic drugs through established primary health care facilities, are needed to decrease these treatment gaps. Neurologists with local experience and knowledge of the culture, who are willing to serve as educators, policy advisors, and advocates, can make a difference. This is Part II of a two-part article. Part I reviewed the burden of epilepsy and the current state of resources for treatment in developing countries, while Part II will now discuss various aspects of care in these countries. PMID:20944819

  2. 40 CFR Appendix II to Part 257 - Appendix II to Part 257

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... to Part 257 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES CRITERIA FOR CLASSIFICATION OF SOLID WASTE DISPOSAL FACILITIES AND PRACTICES Pt. 257, App. II Appendix II... from 60 days at 15 °C to 40 days at 20 °C, with a volatile solids reduction of at least 38 percent. Air...

  3. 40 CFR Appendix II to Part 257 - Appendix II to Part 257

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... to Part 257 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES CRITERIA FOR CLASSIFICATION OF SOLID WASTE DISPOSAL FACILITIES AND PRACTICES Pt. 257, App. II Appendix II... from 60 days at 15 °C to 40 days at 20 °C, with a volatile solids reduction of at least 38 percent. Air...

  4. Photosensitivity disorders in children: part II.

    PubMed

    Chantorn, Rattanavalai; Lim, Henry W; Shwayder, Tor A

    2012-12-01

    Photosensitivity disorders in children encompass a diverse group of diseases. Some inherited disorders manifest with photosensitivity early in life. Specific extracutaneous association may be the clue to diagnosis in this group of pediatric photodermatoses. Part II of this 2-part review covers hereditary photodermatoses caused by defects in nucleotide excision repair, double strand break repair, or localized or systemic biochemical abnormalities. Diagnosis and management of photoaggravated dermatoses are also discussed. Sun protection strategies are required in all patients with evidence of photosensitivity. Early recognition and prompt diagnosis is essential to minimize the long-term complications associated with inadequate photoprotection. Copyright © 2012 American Academy of Dermatology, Inc. Published by Mosby, Inc. All rights reserved.

  5. 10 CFR Appendix II to Part 504 - Fuel Price Computation

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 4 2012-01-01 2012-01-01 false Fuel Price Computation II Appendix II to Part 504 Energy DEPARTMENT OF ENERGY (CONTINUED) ALTERNATE FUELS EXISTING POWERPLANTS Pt. 504, App. II Appendix II to Part 504—Fuel Price Computation (a) Introduction. This appendix provides the equations and...

  6. 10 CFR Appendix II to Part 504 - Fuel Price Computation

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 4 2013-01-01 2013-01-01 false Fuel Price Computation II Appendix II to Part 504 Energy DEPARTMENT OF ENERGY (CONTINUED) ALTERNATE FUELS EXISTING POWERPLANTS Pt. 504, App. II Appendix II to Part... effects of future real price increases for each fuel. The delivered price of an alternate fuel used to...

  7. 10 CFR Appendix II to Part 504 - Fuel Price Computation

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 4 2011-01-01 2011-01-01 false Fuel Price Computation II Appendix II to Part 504 Energy DEPARTMENT OF ENERGY (CONTINUED) ALTERNATE FUELS EXISTING POWERPLANTS Pt. 504, App. II Appendix II to Part... effects of future real price increases for each fuel. The delivered price of an alternate fuel used to...

  8. 10 CFR Appendix II to Part 504 - Fuel Price Computation

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 4 2014-01-01 2014-01-01 false Fuel Price Computation II Appendix II to Part 504 Energy DEPARTMENT OF ENERGY (CONTINUED) ALTERNATE FUELS EXISTING POWERPLANTS Pt. 504, App. II Appendix II to Part... effects of future real price increases for each fuel. The delivered price of an alternate fuel used to...

  9. Making Industry Part of the Climate Solution

    SciTech Connect

    Lapsa, Melissa Voss; Brown, Dr. Marilyn Ann; Jackson, Roderick K; Cox, Matthew; Cortes, Rodrigo; Deitchman, Benjamin H

    2011-06-01

    Improving the energy efficiency of industry is essential for maintaining the viability of domestic manufacturing, especially in a world economy where production is shifting to low-cost, less regulated developing countries. Numerous studies have shown the potential for significant cost-effective energy-savings in U.S. industries, but the realization of this potential is hindered by regulatory, information, workforce, and financial obstacles. This report evaluates seven federal policy options aimed at improving the energy efficiency of industry, grounded in an understanding of industrial decision-making and the barriers to efficiency improvements. Detailed analysis employs the Georgia Institute of Technology's version of the National Energy Modeling System and spreadsheet calculations, generating a series of benefit/cost metrics spanning private and public costs and energy bill savings, as well as air pollution benefits and the social cost of carbon. Two of the policies would address regulatory hurdles (Output-Based Emissions Standards and a federal Energy Portfolio Standard with Combined Heat and Power); three would help to fill information gaps and workforce training needs (the Superior Energy Performance program, Implementation Support Services, and a Small Firm Energy Management program); and two would tackle financial barriers (Tax Lien Financing and Energy-Efficient Industrial Motor Rebates). The social benefit-cost ratios of these policies appear to be highly favorable based on a range of plausible assumptions. Each of the seven policy options has an appropriate federal role, broad applicability across industries, utilizes readily available technologies, and all are administratively feasible.

  10. Diffuse Cystic Lung Disease. Part II

    PubMed Central

    Vassallo, Robert; Wikenheiser-Brokamp, Kathryn A.; McCormack, Francis X.

    2015-01-01

    The diffuse cystic lung diseases have a broad differential diagnosis. A wide variety of pathophysiological processes spanning the spectrum from airway obstruction to lung remodeling can lead to multifocal cyst development in the lung. Although lymphangioleiomyomatosis and pulmonary Langerhans cell histiocytosis are perhaps more frequently seen in the clinic, disorders such as Birt-Hogg-Dubé syndrome, lymphocytic interstitial pneumonia, follicular bronchiolitis, and light-chain deposition disease are increasingly being recognized. Obtaining an accurate diagnosis can be challenging, and management approaches are highly disease dependent. Unique imaging features, genetic tests, serum studies, and clinical features provide invaluable clues that help clinicians distinguish among the various etiologies, but biopsy is often required for definitive diagnosis. In part II of this review, we present an overview of the diffuse cystic lung diseases caused by lymphoproliferative disorders, genetic mutations, or aberrant lung development and provide an approach to aid in their diagnosis and management. PMID:25906201

  11. Aerospace Industry and Research. Aerospace Education II.

    ERIC Educational Resources Information Center

    Mackin, T. E.

    This book, to be used in the Air Force ROTC program only, discusses various aspects of the aerospace industry and its importance to the society. Not only does a modern and strong aerospace technology help in national defense, but it is a major economic industry as well. The vast number of people employed could shake the roots of economic…

  12. Aerospace Industry and Research. Aerospace Education II.

    ERIC Educational Resources Information Center

    Mackin, T. E.

    This book, to be used in the Air Force ROTC program only, discusses various aspects of the aerospace industry and its importance to the society. Not only does a modern and strong aerospace technology help in national defense, but it is a major economic industry as well. The vast number of people employed could shake the roots of economic…

  13. Prediction of periventricular leukomalacia. Part II

    PubMed Central

    Samanta, Biswanath; Bird, Geoffrey L.; Kuijpers, Marijn; Zimmerman, Robert A.; Jarvik, Gail P.; Wernovsky, Gil; Clancy, Robert R.; Licht, Daniel J.; Gaynor, J. William; Nataraj, Chandrasekhar

    2009-01-01

    Summary Objective The objective of Part II is to analyze the dataset of extracted hemodynamic features (Case 3 of Part I) through computational intelligence (CI) techniques for identification of potential prognostic factors for periventricular leukomalacia (PVL) occurrence in neonates with congenital heart disease. Methods The extracted features (Case 3 dataset of Part I) were used as inputs to CI based classifiers, namely, multi-layer perceptron (MLP) and probabilistic neural network (PNN) in combination with genetic algorithms (GA) for selection of the most suitable features predicting the occurrence of PVL. The selected features were next used as inputs to a decision tree (DT) algorithm for generating easily interpretable rules of PVL prediction. Results Prediction performance for two CI based classifiers, MLP and PNN coupled with GA are presented for different number of selected features. The best prediction performances were achieved with 6 and 7 selected features. The prediction success was 100% in training and the best ranges of sensitivity (SN), specificity (SP) and accuracy (AC) in test were 60-73%, 74-84% and 71-74%, respectively. The identified features when used with the DTalgorithm gave best SN, SP and AC in the ranges of 87-90% in training and 80-87%, 74-79% and 79-82% in test. Among the variables selected in CI, systolic and diastolic blood pressures, and pCO2 figured prominently similar to Part I. Decision tree based rules for prediction of PVL occurrence were obtained using the CI selected features. Conclusions The proposed approach combines the generalization capability of CI based feature selection approach and generation of easily interpretable classification rules of the decision tree. The combination of CI techniques with DT gave substantially better test prediction performance than using CI and DT separately. PMID:19162456

  14. 40 CFR Appendix II to Part 261 - [Reserved

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 26 2011-07-01 2011-07-01 false II Appendix II to Part 261 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES (CONTINUED) IDENTIFICATION AND LISTING OF HAZARDOUS WASTE Appendix II to Part 261 ...

  15. 40 CFR Appendix II to Part 261 - [Reserved

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 25 2010-07-01 2010-07-01 false II Appendix II to Part 261 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES (CONTINUED) IDENTIFICATION AND LISTING OF HAZARDOUS WASTE Appendix II to Part 261 ...

  16. Building America Industrialized Housing Partnership (BAIHP II)

    SciTech Connect

    Abernethy, Bob; Chandra, Subrato; Baden, Steven; Cummings, Jim; Cummings, Jamie; Beal, David; Chasar, David; Colon, Carlos; Dutton, Wanda; Fairey, Philip; Fonorow, Ken; Gil, Camilo; Gordon, Andrew; Hoak, David; Kerr, Ryan; Peeks, Brady; Kosar, Douglas; Hewes, Tom; Kalaghchy, Safvat; Lubliner, Mike; Martin, Eric; McIlvaine, Janet; Moyer, Neil; Liguori, Sabrina; Parker, Danny; Sherwin, John; Stroer, Dennis; Thomas-Rees, Stephanie; Daniel, Danielle; McIlvaine, Janet

    2010-11-30

    This report summarizes the work conducted by the Building America Industrialized Housing Partnership (BAIHP - www.baihp.org) during the final budget period (BP5) of our contract, January 1, 2010 to November 30, 2010. Highlights from the four previous budget periods are included for context. BAIHP is led by the Florida Solar Energy Center (FSEC) of the University of Central Florida. With over 50 Industry Partners including factory and site builders, work in BP5 was performed in six tasks areas: Building America System Research Management, Documentation and Technical Support; System Performance Evaluations; Prototype House Evaluations; Initial Community Scale Evaluations; Project Closeout, Final Review of BA Communities; and Other Research Activities.

  17. DICOM: key concepts--part II.

    PubMed

    Kabachinski, Jeff

    2005-01-01

    The objective of these two installments of IT World was to give a general overview of DICOM and to take a look at different parts of the standard to get a sense of its main themes. We found that the standard provides a common reference for all developers but does not impose a single type of implementation. This allows for innovation. The standard is also built for flexibility, able to adapt to new modalities that have a need to communicate. The speedy acceptance of DICOM by the medical imaging industry is opening new possibilities for healthcare organizations to increase the quality while decreasing the cost of patient care. All of the DICOM networked supporting medical equipment as well as the organization's computer systems made by multiple original equipment manufacturers and located at one site or many sites can communicate by means of DICOM. This gives us the opportunity for medical images to be captured and communicated quicker. The result enables physicians to make diagnoses and treatment decisions sooner. It's all good stuff and even more reason why we should endeavor to understand the basics of DICOM. DICOM is here to stay!

  18. Generic drugs in dermatology: part II.

    PubMed

    Payette, Michael; Grant-Kels, Jane M

    2012-03-01

    In part I, we discussed new drug development, reviewed the history of the generic drug industry, described how generic drugs are approved by the US Food and Drug Administration, and defined the concepts of bioequivalence and therapeutic equivalence. Herein, we explore various factors impacting generic drug use across the different parties involved: the prescriber, the pharmacist, the patient, and the payer. We also include original cost analysis of dermatologic brand name and generic drugs and show the potential cost savings that can be achieved through generic substitution. We conclude with a review of the data addressing potential differences in the effectiveness of brand name versus generic drugs in dermatology. The cost of brand name and generic medications is highly variable by pharmacy, state, and payer. We used one source (www.drugstore.com) as an example and for consistency across all medications discussed herein. Prices included here may not reflect actual retail prices across the United States. Copyright © 2011 American Academy of Dermatology, Inc. Published by Mosby, Inc. All rights reserved.

  19. Industrial Electronics II for ICT. Student's Manual.

    ERIC Educational Resources Information Center

    Snider, Bob

    This student manual contains the following six units for classroom and laboratory experiences in high school industrial electronics: (1) introduction and review of DC and AC circuits; (2) semiconductors; (3) integrated circuits; (4) digital basics; (5) complex digital circuits; and (6) computer circuits. The units include unit objectives, specific…

  20. Industrial Electronics II for ICT. Student's Manual.

    ERIC Educational Resources Information Center

    Snider, Bob

    This student manual contains the following six units for classroom and laboratory experiences in high school industrial electronics: (1) introduction and review of DC and AC circuits; (2) semiconductors; (3) integrated circuits; (4) digital basics; (5) complex digital circuits; and (6) computer circuits. The units include unit objectives, specific…

  1. 46 CFR Appendix II to Part 153 - Metric Units Used in Part 153

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... Part 153—Metric Units Used in Part 153 Parameter Metric (SI unit) Abbreviation Equivalent to English or... 46 Shipping 5 2014-10-01 2014-10-01 false Metric Units Used in Part 153 II Appendix II to Part 153 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SHIPS...

  2. 46 CFR Appendix II to Part 153 - Metric Units Used in Part 153

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... Part 153—Metric Units Used in Part 153 Parameter Metric (SI unit) Abbreviation Equivalent to English or... 46 Shipping 5 2013-10-01 2013-10-01 false Metric Units Used in Part 153 II Appendix II to Part 153 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SHIPS...

  3. 46 CFR Appendix II to Part 153 - Metric Units Used in Part 153

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... Part 153—Metric Units Used in Part 153 Parameter Metric (SI unit) Abbreviation Equivalent to English or... 46 Shipping 5 2011-10-01 2011-10-01 false Metric Units Used in Part 153 II Appendix II to Part 153 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SHIPS...

  4. 46 CFR Appendix II to Part 153 - Metric Units Used in Part 153

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... Part 153—Metric Units Used in Part 153 Parameter Metric (SI unit) Abbreviation Equivalent to English or... 46 Shipping 5 2012-10-01 2012-10-01 false Metric Units Used in Part 153 II Appendix II to Part 153 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SHIPS...

  5. Critical appraisal: dental amalgam update--part II: biological effects.

    PubMed

    Wahl, Michael J; Swift, Edward J

    2013-12-01

    Dental amalgam restorations have been controversial for over 150 years. In Part I of this Critical Appraisal, the clinical efficacy of dental amalgam was updated. Here in Part II, the biological effects of dental amalgam are addressed.

  6. Urban Integrated Industrial Cogeneration Systems Analysis. Phase II final report

    SciTech Connect

    Not Available

    1984-01-01

    Through the Urban Integrated Industrial Cogeneration Systems Analysis (UIICSA), the City of Chicago embarked upon an ambitious effort to identify the measure the overall industrial cogeneration market in the city and to evaluate in detail the most promising market opportunities. This report discusses the background of the work completed during Phase II of the UIICSA and presents the results of economic feasibility studies conducted for three potential cogeneration sites in Chicago. Phase II focused on the feasibility of cogeneration at the three most promising sites: the Stockyards and Calumet industrial areas, and the Ford City commercial/industrial complex. Each feasibility case study considered the energy load requirements of the existing facilities at the site and the potential for attracting and serving new growth in the area. Alternative fuels and technologies, and ownership and financing options were also incorporated into the case studies. Finally, site specific considerations such as development incentives, zoning and building code restrictions and environmental requirements were investigated.

  7. 40 CFR Appendix II to Part 86 - Temperature Schedules

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 19 2010-07-01 2010-07-01 false Temperature Schedules II Appendix II... Appendix II to Part 86—Temperature Schedules (a) Ambient temperature cycle for the diurnal emission portion of the evaporative emission test (see § 86.133). Table I—Temperature Versus Time Sequence Use linear...

  8. 40 CFR Appendix II to Part 86 - Temperature Schedules

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 20 2013-07-01 2013-07-01 false Temperature Schedules II Appendix II... Appendix II to Part 86—Temperature Schedules (a) Ambient temperature cycle for the diurnal emission portion of the evaporative emission test (see § 86.133). Table I—Temperature Versus Time Sequence Use linear...

  9. 40 CFR Appendix II to Part 86 - Temperature Schedules

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 20 2012-07-01 2012-07-01 false Temperature Schedules II Appendix II... Appendix II to Part 86—Temperature Schedules (a) Ambient temperature cycle for the diurnal emission portion of the evaporative emission test (see § 86.133). Table I—Temperature Versus Time Sequence Use linear...

  10. 40 CFR Appendix II to Part 86 - Temperature Schedules

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 19 2011-07-01 2011-07-01 false Temperature Schedules II Appendix II... Appendix II to Part 86—Temperature Schedules (a) Ambient temperature cycle for the diurnal emission portion of the evaporative emission test (see § 86.133). Table I—Temperature Versus Time Sequence Use linear...

  11. Consular Reports on Continuation Schools in Prussia: I. Vocational Training in Magdeburg; II. Part-Time Schools for Industrial Workers; III. The City Continuation and Trade School of Brunswick; IV. The Continuation Schools of Barmen; V. Part-Time Shoe Schools in Breslau. Bulletin, 1913, No. 9. Whole Number 516

    ERIC Educational Resources Information Center

    Ives, Ernest L.; Busser, Ralph C.; Albert, Talbot J.; Eager, Eugene; Potts, Frank G.

    1913-01-01

    This bulletin contains a compilation of consular reports on continuation schools in Prussia. It is presented in five sections, as follows: (1) Vocational Training in Magdeburg; (2) Part-Time Schools for Industrial Workers; (3) The City Continuation and Trade School of Brunswick; (4) The Continuation Schools of Barmen; and (5) Part-Time Shoe…

  12. Talking about the Weather, Part II.

    ERIC Educational Resources Information Center

    Gibb, Allan A.

    1984-01-01

    This second part of a two-part article highlights some mathematics involved in the study of meteorology. Examples are given of the application of mathematics to the study of the atmosphere, with three problems discussed. (MNS)

  13. Talking about the Weather, Part II.

    ERIC Educational Resources Information Center

    Gibb, Allan A.

    1984-01-01

    This second part of a two-part article highlights some mathematics involved in the study of meteorology. Examples are given of the application of mathematics to the study of the atmosphere, with three problems discussed. (MNS)

  14. Industrial Crafts (Production.) Industrial Arts, Senior High--Level II. North Dakota Senior High Industrial Arts Curriculum Guides.

    ERIC Educational Resources Information Center

    Claus, Robert; And Others

    This course guide for an industrial crafts course is one of four developed for the production area in the North Dakota senior high industrial arts education program. (Eight other guides are available for two other areas of Industrial Arts--energy/power and graphic communications.) Part 1 provides such introductory information as a definition and…

  15. 40 CFR Appendixes I-Ii to Part 268 - [Reserved

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 28 2012-07-01 2012-07-01 false I Appendixes I-II to Part 268 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES (CONTINUED) LAND DISPOSAL RESTRICTIONS Appendixes I-II to Part 268...

  16. 40 CFR Appendixes I-Ii to Part 268 - [Reserved

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 27 2011-07-01 2011-07-01 false I Appendixes I-II to Part 268 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES (CONTINUED) LAND DISPOSAL RESTRICTIONS Appendixes I-II to Part 268...

  17. 40 CFR Appendixes I-Ii to Part 268 - [Reserved

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 26 2010-07-01 2010-07-01 false I Appendixes I-II to Part 268 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES (CONTINUED) LAND DISPOSAL RESTRICTIONS Appendixes I-II to Part 268...

  18. 40 CFR Appendixes I-Ii to Part 268 - [Reserved

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 27 2014-07-01 2014-07-01 false I Appendixes I-II to Part 268 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES (CONTINUED) LAND DISPOSAL RESTRICTIONS Appendixes I-II to Part 268...

  19. 40 CFR Appendixes I-Ii to Part 268 - [Reserved

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 28 2013-07-01 2013-07-01 false I Appendixes I-II to Part 268 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES (CONTINUED) LAND DISPOSAL RESTRICTIONS Appendixes I-II to Part 268...

  20. Reclaiming Kindergarten: Part II--Questions about Policy

    ERIC Educational Resources Information Center

    Gullo, Dominic F.; Hughes, Kim

    2011-01-01

    Part II of "Reclaiming Kindergarten" continues the discussion related to responding to the crisis in today's kindergarten. In Part II, two policy questions are posed, the answers to which seek to respond to this continuing crisis. The questions center on issues related to engaging families in kindergarten and the need to consider a new early…

  1. Physician-industry relations. Part 1: individual physicians.

    PubMed

    Coyle, Susan L

    2002-03-05

    This is part 1 of a 2-part paper on ethics and physician-industry relationships. Part 1 offers advice to individual physicians; part 2 gives recommendations to medical education providers and medical professional societies. Physicians and industry have a shared interest in advancing medical knowledge. Nonetheless, the primary ethic of the physician is to promote the patient's best interests, while the primary ethic of industry is to promote profitability. Although partnerships between physicians and industry can result in impressive medical advances, they also create opportunities for bias and can result in unfavorable public perceptions. Many physicians and physicians-in-training think they are impervious to commercial influence. However, recent studies show that accepting industry hospitality and gifts, even drug samples, can compromise judgment about medical information and subsequent decisions about patient care. It is up to the physician to judge whether a gift is acceptable. A very general guideline is that it is ethical to accept modest gifts that advance medical practice. It is clearly unethical to accept gifts or services that obligate the physician to reciprocate. Conflicts of interest can arise from other financial ties between physicians and industry, whether to outside companies or self-owned businesses. Such ties include honorariums for speaking or writing about a company's product, payment for participating in clinic-based research, and referrals to medical resources. All of these relationships have the potential to influence a physician's attitudes and practices. This paper explores the ethical quandaries involved and offers guidelines for ethical business relationships.

  2. Greed in the Groves: Part II.

    ERIC Educational Resources Information Center

    Minsky, Leonard

    2000-01-01

    Describes the rise of an academic-industrial complex through which American and multinational corporations siphon the publicly created resources of universities and thereby convert publicly financed research into private gain. Asserts that this new corporate dominance represents an unprecedented intrusion into the heart of academic freedom which…

  3. Disks for the Laboratory Part II.

    ERIC Educational Resources Information Center

    Dessy, Raymond E., Ed.

    1985-01-01

    Part 1 presents the chemistry, physics, and engineering technology associated with magnetic and optical disks. This part explores the subjects of archiving, security, validation and certification, and protection. Questions and issues are raised in each of the areas that both users and vendors should be aware. (JN)

  4. Phenomenology of electromagnetic coupling. Part II

    SciTech Connect

    King, R.J.; Ludwigsen, A.P.; Kunz, K.S.

    1985-08-01

    This report is the second of a planned series which summarize efforts at Lawrence Livermore National Laboratory relating to phenomenology studies of back door coupling from several MHz to 10's of GHz. These studies are pertinent to high altitude EMP (HEMP), enhanced HEMP and microwave coupling. Part I dealt with coupling through apertures into large free-standing cavities having, at most, one interior cable. An overview of the effort is given, and a summary of the effects observed in Part I. The main effort since Part I has been devoted to Facilities Development, development of an interior coupling decomposition model and coupling experiments. Projected future effort is discussed.

  5. Evaluation of ADINA. Part II. Operating Characteristics.

    DTIC Science & Technology

    1980-06-08

    Mooney Rivlin material, small/ large deformation i) static ii) dynamic iii) frequency (linear) 3. Spherical shell; elastic, plastic, concrete, small...Neighborhood of Buckling Zone 13 11-8 Typical Negative Stiffness Generated in Neighborhood of Buckling Zone 14 III-1 Rubber Sheet Geometry Material...Properties and Element Model 26 111-2 Global Energy Increment of Rubber Sheet (1st Load Step) 28 111-3 Global Energy Increment of Rubber Sheet (1st Load

  6. Fire prevention on airplanes. Part II

    NASA Technical Reports Server (NTRS)

    Sabatier, J

    1929-01-01

    This part of the report presents a detailed examination of spark prevention, fire extinguishers, and fuel tank location and design. A continued program of investigations and research is also proposed.

  7. Electric injury, Part II: Specific injuries.

    PubMed

    Fish, R M

    2000-01-01

    Electric injury can cause disruption of cardiac rhythm and breathing, burns, fractures, dislocations, rhabdomyolysis, eye and ear injury, oral and gastrointestinal injury, vascular damage, disseminated intravascular coagulation, peripheral and spinal cord injury, and Reflex Sympathetic Dystrophy. Secondary trauma from falls, fires, flying debris, and inhalation injury can complicate the clinical picture. Diagnostic and treatment considerations for electric injuries are described in this article, which is the second part of a three-part series on electric injuries.

  8. Prescription pricing across Canada (Part II).

    PubMed

    Archer, F

    1984-09-01

    The first of a two part article entitled "Prescription Pricing Across Canada" appeared in the June issue of CPJ. The article was prompted by recent press reports of a prescription drug study commissioned by the Saskatchewan government, and the consequent attention-getting headlines. The first article dealt with the Western provinces. The second part discusses prescription pricing in Ontario, Québec, New Brunswick, Nova Scotia, Prince Edward Island, Newfoundland, and the Northwest Territories.

  9. Searching LEXIS and WESTLAW: Part II.

    ERIC Educational Resources Information Center

    Franklin, Carl

    1986-01-01

    This second of a three-part series compares search features (i.e., truncation symbols, boolean operators, proximity operators, phrase searching, save searches) of two databases providing legal information. Search tips concerning charges and effective searching and tables listing functions of commands and proximity operators for both databases are…

  10. The Metis Nation--Part Two II.

    ERIC Educational Resources Information Center

    Dorian, John

    1978-01-01

    This article deals with historical events involving the Metis people from the time Manitoba entered the Confederation to the conclusion of the 1885 battle at Fish Creek near Batoche, Saskatchewan. Part I is in the Summer, 1978 issue of the Northian. (Author/RTS)

  11. Cutting out the Middleman: Part II.

    ERIC Educational Resources Information Center

    Hansen, Shirley; Crittenden, Chris

    1985-01-01

    The second part of the article published in "American School and University," December 1984 (EA 518 236), outlines specific steps administrators need to take to determine whether or not a direct purchase of natural gas is going to benefit their schools. (MLF)

  12. Cutting out the Middleman: Part II.

    ERIC Educational Resources Information Center

    Hansen, Shirley; Crittenden, Chris

    1985-01-01

    The second part of the article published in "American School and University," December 1984 (EA 518 236), outlines specific steps administrators need to take to determine whether or not a direct purchase of natural gas is going to benefit their schools. (MLF)

  13. Inquiry and Living History, Part II

    ERIC Educational Resources Information Center

    Coatney, Sharon; Smalley, Rachel

    2006-01-01

    In the first part of this article, the authors introduced the living history program. This yearly, weeklong program features living portrayals of famous people, which becomes a catalyst for teaching curricular standards, as well as providing the spark for inquiry. Successful implementation of this program requires providing teachers with…

  14. Inquiry and Living History, Part II

    ERIC Educational Resources Information Center

    Coatney, Sharon; Smalley, Rachel

    2006-01-01

    In the first part of this article, the authors introduced the living history program. This yearly, weeklong program features living portrayals of famous people, which becomes a catalyst for teaching curricular standards, as well as providing the spark for inquiry. Successful implementation of this program requires providing teachers with…

  15. Cardiac Electrophysiology in Lebanon—Part II

    PubMed Central

    Kossaify, Antoine; Refaat, Marwan; Khoury, Maurice

    2013-01-01

    Systematic national effort to improve cardiac electrophysiology practice in Lebanon is lacking, and the quality improvement program mainly relates to individual efforts along with regulations, which are set as a “Road Map” by the Lebanese Arrhythmia Working Group. Lebanon currently has five electrophysiology laboratories. The “Road Map” mainly consists of creating a registry and a National Card for Electronic Device Holder, centralization of complex electrophysiology procedures in institutions where electrophysiologists are available, setting regulations to conform to international guidelines, and creating a National Arrhythmia Website and E-Journal. Most importantly, we emphasize that the practice of device checking must be performed by physicians with expertise and not by industry technicians. PMID:24046513

  16. Wound healing: part II. Clinical applications.

    PubMed

    Janis, Jeffrey; Harrison, Bridget

    2014-03-01

    Treatment of all wounds requires adequate wound bed preparation, beginning with irrigation and débridement. Complicated or chronic wounds may also require treatment adjuncts or specialized wound healing products. An extensive body of research and development has introduced novel wound healing therapies and scar management options. In this second of a two-part continuing medical education series on wound healing, the reader is offered an update on current wound healing technologies and recommendations for obtaining optimal outcomes.

  17. Corporate liability: security and violence--Part II.

    PubMed

    Fiesta, J

    1996-04-01

    A hospital can be held liable for injuries resulting from failure to provide adequate, reasonable security Part II of "corporate Liability: Security and Violence" addresses negligent hiring and supervision practices, injury and domestic violence in the workplace and communication procedures.

  18. Managing changes during a clinical investigation, Part II.

    PubMed

    Donawa, Maria

    2003-10-01

    What are the European requirements for managing changes that may occur during a clinical investigation? Part II of this article discusses these requirements and the development of a standard operating procedure to help ensure consistent compliance.

  19. 40 CFR Appendix II to Part 86 - Temperature Schedules

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 19 2014-07-01 2014-07-01 false Temperature Schedules II Appendix II... to Part 86—Temperature Schedules (a) Ambient temperature cycle for the diurnal emission portion of the evaporative emission test (see § 86.133). Table I—Temperature Versus Time Sequence Use linear...

  20. Treatment of superficial mycoses: review - part II*

    PubMed Central

    Dias, Maria Fernanda Reis Gavazzoni; Bernardes-Filho, Fred; Quaresma-Santos, Maria Victória Pinto; Amorim, Adriana Gutstein da Fonseca; Schechtman, Regina Casz; Azulay, David Rubem

    2013-01-01

    Superficial fungal infections of the hair, skin and nails are a major cause of morbidity in the world. Choosing the right treatment is not always simple because of the possibility of drug interactions and side effects. The first part of the article discusses the main treatments for superficial mycoses - keratophytoses, dermatophytosis, candidiasis, with a practical approach to the most commonly-used topical and systemic drugs , referring also to their dosage and duration of use. Promising new, antifungal therapeutic alternatives are also highlighted, as well as available options on the Brazilian and world markets. PMID:24474103

  1. Magnet hospitals: Part II. Institutions of excellence.

    PubMed

    Kramer, M; Schmalenberg, C

    1988-02-01

    The oft repeated charge today is to "focus on those who are succeeding!" That's what this report does. Using the eight characteristics identified by Peters and Waterman in their book In Search of Excellence, the study analyzes 16 magnet hospitals to ascertain to what extent they possess characteristics similar to the 'best run' companies in the corporate community. The authors suggest that these magnet hospitals may be dealing effectively with the nursing shortage by creating organizational conditions conducive to eliminating internal nurse shortage. Part I of this article appeared the January 1988 issue of JONA.

  2. Drugs, money and society (Part II).

    PubMed

    Walley, Tom

    2010-09-01

    Pharmacoeconomics started as marketing but has developed into a valuable tool in the fuller assessment of drug therapies. Its principles are now widely accepted, and many countries have government-funded agencies with responsibility for its application, most notably the National Institute for Health and Clinical Excellence in England. Many clinical pharmacologists are active in this area, and the discipline itself is part of the clinical pharmacology trainees' curriculum. Further developments will include value-based pricing and its use in cost sharing arrangements between health service and manufacturers.

  3. Curriculum Redesign in Veterinary Medicine: Part II.

    PubMed

    Macik, Maria L; Chaney, Kristin P; Turner, Jacqueline S; Rogers, Kenita S; Scallan, Elizabeth M; Korich, Jodi A; Fowler, Debra; Keefe, Lisa M

    2017-01-01

    Curricular review is considered a necessary component for growth and enhancement of academic programs and requires time, energy, creativity, and persistence from both faculty and administration. On a larger scale, a comprehensive redesign effort involves forming a dedicated faculty redesign team, developing program learning outcomes, mapping the existing curriculum, and reviewing the curriculum in light of collected stakeholder data. The faculty of the Texas A&M University College of Veterinary Medicine & Biomedical Sciences (TAMU) recently embarked on a comprehensive curriculum redesign effort through partnership with the university's Center for Teaching Excellence. Using a previously developed evidence-based model of program redesign, TAMU created a process for use in veterinary medical education, which is described in detail in the first part of this article series. An additional component of the redesign process that is understated, yet vital for success, is faculty buy-in and support. Without faculty engagement, implementation of data-driven curricular changes stemming from program evaluation may be challenging. This second part of the article series describes the methodology for encouraging faculty engagement through the final steps of the redesign initiative and the lessons learned by TAMU through the redesign process.

  4. Biosimilars in Dermatology: Current Situation (Part II).

    PubMed

    Puig, L; Carretero, G; Daudén, E; Ferrándiz, C; Marrón, S E; Martorell, A; Pérez-Suárez, B; Rodriguez-Cerdeira, C; Ruiz-Villaverde, R; Sánchez-Carazo, J L; Velasco, M

    2015-09-01

    The first biosimilar version of a biologic agent used to treat psoriasis (infliximab) entered the Spanish market on February 16 of this year, and more biosimilars can be expected to follow in the coming months and years. Logically, this new situation will have economic repercussions and alter prescribing patterns among dermatologists. In this second part of the review, we will look at several somewhat contentious issues, such as the extrapolation of indications, interchangeability, and automatic substitution. We will also review the biosimilars with indications for psoriasis currently in the clinical development pipeline and assess their potential to offer comparable efficacy and safety to the reference product while contributing to the sustainability of the public health care system.

  5. The sociogeometry of inequality: Part II

    NASA Astrophysics Data System (ADS)

    Eliazar, Iddo

    2015-05-01

    The study of socioeconomic inequality is of prime economic and social importance, and the key quantitative gauges of socioeconomic inequality are Lorenz curves and inequality indices - the most notable of the latter being the popular Gini index. In this series of papers we present a sociogeometric framework to the study of socioeconomic inequality. In this part we focus on the gap between the rich and the poor, which is quantified by gauges termed disparity curves. We shift from disparity curves to disparity sets, define inequality indices in terms of disparity sets, and introduce and explore a collection of distance-based and width-based inequality indices stemming from the geometry of disparity sets. We conclude with mean-absolute-deviation (MAD) representations of the inequality indices established in this series of papers, and with a comparison of these indices to the popular Gini index.

  6. Submodeling Simulations in Fusion Welds: Part II

    NASA Astrophysics Data System (ADS)

    Bonifaz, E. A.

    2013-11-01

    In part I, three-dimensional transient non-linear sub modeling heat transfer simulations were performed to study the thermal histories and thermal cycles that occur during the welding process at the macro, meso and micro scales. In the present work, the corresponding non-uniform temperature changes were imposed as load conditions on structural calculations to study the evolution of localized plastic strains and residual stresses at these sub-level scales. To reach the goal, a three-dimensional finite element elastic-plastic model (ABAQUS code) was developed. The sub-modeling technique proposed to be used in coupling phase-field (and/or digital microstructures) codes with finite element codes, was used to mesh a local part of the model with a refined mesh based on interpolation of the solution from an initial, relatively coarse, macro global model. The meso-sub-model is the global model for the subsequent micro sub-model. The strategy used to calculate temperatures, strains and residual stresses at the macro, meso and micro scale level, is very flexible to be used to any number of levels. The objective of this research was to initiate the development of microstructural models to identify fusion welding process parameters for preserving the single crystal nature of gas turbine blades during repair procedures. The multi-scale submodeling approach can be used to capture weld pool features at the macro-meso scale level, and micro residual stress and secondary dendrite arm spacing features at the micro scale level.

  7. Overactive bladder - 18 years - Part II.

    PubMed

    Truzzi, Jose Carlos; Gomes, Cristiano Mendes; Bezerra, Carlos A; Plata, Ivan Mauricio; Campos, Jose; Garrido, Gustavo Luis; Almeida, Fernando G; Averbeck, Marcio Augusto; Fornari, Alexandre; Salazar, Anibal; Dell'Oro, Arturo; Cintra, Caio; Sacomani, Carlos Alberto Ricetto; Tapia, Juan Pablo; Brambila, Eduardo; Longo, Emilio Miguel; Rocha, Flavio Trigo; Coutinho, Francisco; Favre, Gabriel; Garcia, Jose Antonio; Castano, Juan; Reyes, Miguel; Leyton, Rodrigo Eugenio; Ferreira, Ruiter Silva; Duran, Sergio; Lopez, Vanda; Reges, Ricardo

    2016-01-01

    Traditionally, the treatment of overactive bladder syndrome has been based on the use of oral medications with the purpose of reestablishing the detrusor stability. The recent better understanding of the urothelial physiology fostered conceptual changes, and the oral anticholinergics - pillars of the overactive bladder pharmacotherapy - started to be not only recognized for their properties of inhibiting the detrusor contractile activity, but also their action on the bladder afference, and therefore, on the reduction of the symptoms that constitute the syndrome. Beta-adrenergic agonists, which were recently added to the list of drugs for the treatment of overactive bladder, still wait for a definitive positioning - as either a second-line therapy or an adjuvant to oral anticholinergics. Conservative treatment failure, whether due to unsatisfactory results or the presence of adverse side effects, define it as refractory overactive bladder. In this context, the intravesical injection of botulinum toxin type A emerged as an effective option for the existing gap between the primary measures and more complex procedures such as bladder augmentation. Sacral neuromodulation, described three decades ago, had its indication reinforced in this overactive bladder era. Likewise, the electric stimulation of the tibial nerve is now a minimally invasive alternative to treat those with refractory overactive bladder. The results of the systematic literature review on the oral pharmacological treatment and the treatment of refractory overactive bladder gave rise to this second part of the review article Overactive Bladder - 18 years, prepared during the 1st Latin-American Consultation on Overactive Bladder.

  8. Adhesive-composite incompatibility, part II.

    PubMed

    Carvalho, Ricardo M; Garcia, Fernanda Cristina P; e Silva, Safira M A; Castro, Fabrício L A

    2005-01-01

    Apart from some questions related to the repairability of resin composite restorations, dentists have always assumed that methacrylate-based resins are compatible with each other. For example, there is no clinically relevant problem in using a microfilled composite to laminate a Class IV restoration made with a hybrid composite, even if they are not of the same brand or manufacturer. In the context of adhesive systems, we have always believed that resin composites, regardless of their type or composition, bond well to all types of bonding agents. However, unexpected debonding of self-cured, core buildup composites that had been bonded with single-bottle adhesive systems was reported about 5 years ago. Subsequent studies demonstrated that there were, indeed, compatibility problems between simplified adhesive systems and self- or dual-cured resin composites. Apparently, when such combinations are used, reduced bond strengths and subsequent failures at the resin-adhesive interface can occur because of adverse reactions between the acidic resin monomers, an integral part of the simplified adhesive systems, and the chemicals involved in the polymerization mechanism of the self- or dual-cured composites, particularly the basic tertiary amines.

  9. A Physicist for All Seasons: Part II

    NASA Astrophysics Data System (ADS)

    Oppenheimer, Frank

    2013-06-01

    The second part of this interview covers Frank Oppenheimer's move to the University of California at Berkeley and wartime work at the Westinghouse Research Laboratories in Pittsburgh, Pennsylvania, at the electromagnetic-separation plant in Oak Ridge, Tennessee, and at Los Alamos, New Mexico (1941-1945); his postwar research at Berkeley (1945-1947); his appointment at the University of Minnesota in 1947 and firing two years later after being required to testify before the House Un-American Activities Committee; his decade as a rancher in Colorado (1949-1959) and high-school science teacher toward the end of this period; his research at the University of Colorado in Boulder after 1959; his year as a Guggenheim Fellow at University College London in 1965; and his founding of the Exploratorium in San Francisco. California, in 1969. He also discusses his wartime relations with his older brother Robert and postwar events in Robert's life, including his Hearings before the Personnel Security Board of the Atomic Energy Commission in 1954.

  10. Wave Propagation in Polymers, Part II

    NASA Astrophysics Data System (ADS)

    Newlander, David C.; Charest, Jacques A.; Lilly, Martin D.; Eisler, Robert D.

    1999-06-01

    Work reported in a previous study (Wave Propagations in Polymers, Part I, J.A. Charest, M.D. Lilly, 44th ARA Meeting Munich, Germany Sept. 17-20, 1993) discussed gas gun plane wave impact work and the measurements of stress wave profiles in Polycarbonate at around 2 kbars. The wave profiles were obtained using combined carbon and PVDF thin film stress gauges. The results showed amplitude attenuation and dispersion effects which were neither expected nor predictable from available hydrocode models. The data have been revisited using a modified material model and the PUFF74 computer code. These new wave profile calculations show remarkable agreement with the previous experiments in Polycarbonate. The model treats the material as viscoelastic-plastic using methods developed by Bade (Dynamic Response Model for PMMA, W. L. Bade, AVCO Systems Division, TR K500-74-WLB-204, Oct. 1, 1974). The measured and calculated results are quite different from those exhibited by PMMA at similar impact conditions. This work is expected to further our understanding of the processes that control wave propagation in highly-compressible and viscoelastic/viscoplastic media. It is also expected to provide clues on the effects of high strain rates on properties such as the modulus of elasticity, strength, and material loading behavior.

  11. [Conceptual Development in Cognitive Science. Part II].

    PubMed

    Fierro, Marco

    2012-03-01

    Cognitive science has become the most influential paradigm on mental health in the late 20(th) and the early 21(st) centuries. In few years, the concepts, problem approaches and solutions proper to this science have significantly changed. Introduction and discussion of the fundamental concepts of cognitive science divided in four stages: Start, Classic Cognitivism, Connectionism, and Embodying / Enacting. The 2(nd) Part of the paper discusses the above mentioned fourth stage and explores the clinical setting, especially in terms of cognitive psychotherapy. The embodying/enacting stage highlights the role of the body including a set of determined evolutionary movements which provide a way of thinking and exploring the world. The performance of cognitive tasks is considered as a process that uses environmental resources that enhances mental skills and deploys them beyond the domestic sphere of the brain. On the other hand, body and mind are embedded in the world, thus giving rise to cognition when interacting, a process known as enacting. There is a close connection between perception and action, hence the interest in real-time interactions with the world rather than abstract reasoning. Regarding clinics, specifically the cognitive therapy, there is little conceptual discussion maybe due to good results from practice that may led us to consider that theoretical foundations are firm and not problem-raising. Copyright © 2012 Asociación Colombiana de Psiquiatría. Publicado por Elsevier España. All rights reserved.

  12. Industrial Maintenance, Volume II-B. Post Secondary Curriculum Guide.

    ERIC Educational Resources Information Center

    Butler, Raymond H.; And Others

    This volume is the third of four volumes that comprise a curriculum guide for a postsecondary industrial maintenance program. It contains part of section 3 of the guide which contains the unit guides for 10 of the 12 duties included in the course. Each of the 247 tasks included in these 10 duties is presented on a separate page and contains the…

  13. Industrial Maintenance, Volume II-B. Post Secondary Curriculum Guide.

    ERIC Educational Resources Information Center

    Butler, Raymond H.; And Others

    This volume is the third of four volumes that comprise a curriculum guide for a postsecondary industrial maintenance program. It contains part of section 3 of the guide which contains the unit guides for 10 of the 12 duties included in the course. Each of the 247 tasks included in these 10 duties is presented on a separate page and contains the…

  14. Correctional Training. Institution Familiarization. Part II: The Training Program.

    ERIC Educational Resources Information Center

    Bureau of Prisons (Dept. of Justice), Washington, DC.

    Designed to assist training coordinators in the initial institution familiarization training for new employees in correctional institutions, this manual consists of two documents: a training coordinator's guide (Part I - CE 017 285) and this document, the training program (Part II). Four training areas are treated: (1) an introduction consisting…

  15. Calculus of Elementary Functions, Part II. Teacher's Commentary. Revised Edition.

    ERIC Educational Resources Information Center

    Herriot, Sarah T.; And Others

    This course is intended for students who have a thorough knowledge of college preparatory mathematics, including algebra, axiomatic geometry, trigonometry, and analytic geometry. This teacher's guide is for Part II of the course. It is designed to follow Part I of the text. The guide contains background information, suggested instructional…

  16. Kick, Glide, Pole! Cross-Country Skiing Fun (Part II)

    ERIC Educational Resources Information Center

    Duoos, Bridget A.

    2012-01-01

    Part I of Kick, Glide, Pole! Cross-Country Skiing Fun, which was published in last issue, discussed how to select cross-country ski equipment, dress for the activity and the biomechanics of the diagonal stride. Part II focuses on teaching the diagonal stride technique and begins with a progression of indoor activities. Incorporating this fun,…

  17. Kick, Glide, Pole! Cross-Country Skiing Fun (Part II)

    ERIC Educational Resources Information Center

    Duoos, Bridget A.

    2012-01-01

    Part I of Kick, Glide, Pole! Cross-Country Skiing Fun, which was published in last issue, discussed how to select cross-country ski equipment, dress for the activity and the biomechanics of the diagonal stride. Part II focuses on teaching the diagonal stride technique and begins with a progression of indoor activities. Incorporating this fun,…

  18. Photoprotection: part II. Sunscreen: development, efficacy, and controversies.

    PubMed

    Jansen, Rebecca; Osterwalder, Uli; Wang, Steven Q; Burnett, Mark; Lim, Henry W

    2013-12-01

    In addition to the naturally occurring, physical, and systemic photoprotective agents reviewed in part I, topical ultraviolet radiation filters are an important cornerstone of photoprotection. Sunscreen development, efficacy, testing, and controversies are reviewed in part II of this continuing medical education article. Copyright © 2013 American Academy of Dermatology, Inc. Published by Mosby, Inc. All rights reserved.

  19. Corporate Library Impact, Part II: Methodological Trade-Offs

    ERIC Educational Resources Information Center

    Edgar, William

    2004-01-01

    This article and its accompanying one address the corporate library's contribution to its parent firm. Part I reviews the literature on determining this contribution, revealing the need for a more theoretical approach to this problem. It then presents this approach. This article, Part II, reviews methodological trade-offs in pursuing this new…

  20. Minimizing Glovebox Glove Breaches: PART II.

    SciTech Connect

    Cournoyer, M. E.; Andrade, R.M.; Taylor, D. J.; Stimmel, J. J.; Zaelke, R. L.; Balkey, J. J.

    2005-01-01

    As a matter of good business practices, a team of glovebox experts from Los Alamos National Laboratory (LANL) has been assembled to proactively investigate processes and procedures that minimize unplanned breaches in the glovebox, e.g., glove failures. A major part of this effort involves the review of glovebox glove failures that have occurred at the Plutonium Facility and at the Chemical and Metallurgy Research Facility. Information dating back to 1993 has been compiled from formal records. This data has been combined with information obtained from a baseline inventory of about 9,000 glovebox gloves. The key attributes tracked include those related to location, the glovebox glove, type and location of breaches, the worker, and the consequences resulting from breaches. This glovebox glove failure analysis yielded results in the areas of the ease of collecting this type of data, the causes of most glove failures that have occurred, the effectiveness of current controls, and recommendations to improve hazard control systems. As expected, a significant number of breaches involve high-risk operations such as grinding, hammering, using sharps (especially screwdrivers), and assembling equipment. Surprisingly, tasks such as the movement of equipment and material between gloveboxes and the opening of cans are also major contributions of breaches. Almost half the gloves fail within a year of their install date. The greatest consequence for over 90% of glovebox glove failures is alpha contamination of protective clothing. Personnel self-monitoring at the gloveboxes continues to be the most effective way of detecting glovebox glove failures. Glove failures from these tasks can be reduced through changes in procedures and the design of remote-handling apparatus. The Nuclear Materials Technology Division management uses this information to improve hazard control systems to reduce the number of unplanned breaches in the glovebox further. As a result, excursions of contaminants

  1. EDUCATION AND THE DEVELOPMENT OF IN-RESIDENCE TRAINING PROGRAMS, PART I, PART II.

    ERIC Educational Resources Information Center

    MELICAN, ROBERT L.; PURCELL, FRANCIS P.

    THE TWO PARTS OF THIS DISCUSSION CONSIDER THE DEVELOPMENT OF RESIDENTIAL PROGRAMS FOR VOCATIONAL AND SOCIAL TRAINING TO MEET THE PROBLEMS OF THE LOW-INCOME SCHOOL DROPOUT. PART I REVIEWS THE HISTORICAL BACKGROUND OF RESIDENCY PROGRAMS IN SUCH EDUCATIONAL INSTITUTIONS AS COLLEGES, UNIVERSITIES, CHURCHES, AND SUMMER CAMPS. PART II DEALS WITH THE…

  2. Ontario Universities Benefits Survey, 1991-92. Part I: Benefits Excluding Pensions [and] Part II: Pensions.

    ERIC Educational Resources Information Center

    Council of Senior Administrative Officers--Universities of Ontario, Toronto.

    This report, which combined Part I and Part II of a benefit study, presents data from a survey of Ontario universities concerning fringe benefits offered in 1991-92. Part I is made up of a series of tables displaying the information on particular benefits institution-by-institution. The first five tables cover general aspects of benefits,…

  3. AT2 DS II - Accelerator System Design (Part II) - CCC Video Conference

    SciTech Connect

    2010-12-17

    Discussion Session - Accelerator System Design (Part II) Tutors: C. Darve, J. Weisend II, Ph. Lebrun, A. Dabrowski, U. Raich Video Conference with the CERN Control Center. Experts in the field of Accelerator science will be available to answer the students questions. This session will link the CCC and SA (using Codec VC).

  4. AT2 DS II - Accelerator System Design (Part II) - CCC Video Conference

    ScienceCinema

    None

    2016-07-12

    Discussion Session - Accelerator System Design (Part II) Tutors: C. Darve, J. Weisend II, Ph. Lebrun, A. Dabrowski, U. Raich Video Conference with the CERN Control Center. Experts in the field of Accelerator science will be available to answer the students questions. This session will link the CCC and SA (using Codec VC).

  5. Recent Economic Perspectives on Political Economy, Part II*

    PubMed Central

    Dewan, Torun; Shepsle, Kenneth A.

    2013-01-01

    In recent years some of the best theoretical work on the political economy of political institutions and processes has begun surfacing outside the political science mainstream in high quality economics journals. This two-part paper surveys these contributions from a recent five-year period. In Part I, the focus is on elections, voting and information aggregation, followed by treatments of parties, candidates, and coalitions. In Part II, papers on economic performance and redistribution, constitutional design, and incentives, institutions, and the quality of political elites are discussed. Part II concludes with a discussion of the methodological bases common to economics and political science, the way economists have used political science research, and some new themes and arbitrage opportunities. PMID:23606754

  6. Recent Economic Perspectives on Political Economy, Part II.

    PubMed

    Dewan, Torun; Shepsle, Kenneth A

    2008-07-01

    In recent years some of the best theoretical work on the political economy of political institutions and processes has begun surfacing outside the political science mainstream in high quality economics journals. This two-part paper surveys these contributions from a recent five-year period. In Part I, the focus is on elections, voting and information aggregation, followed by treatments of parties, candidates, and coalitions. In Part II, papers on economic performance and redistribution, constitutional design, and incentives, institutions, and the quality of political elites are discussed. Part II concludes with a discussion of the methodological bases common to economics and political science, the way economists have used political science research, and some new themes and arbitrage opportunities.

  7. Nursing Care of Patients Undergoing Chemotherapy Desensitization: Part II.

    PubMed

    Jakel, Patricia; Carsten, Cynthia; Carino, Arvie; Braskett, Melinda

    2016-04-01

    Chemotherapy desensitization protocols are safe, but labor-intensive, processes that allow patients with cancer to receive medications even if they initially experienced severe hypersensitivity reactions. Part I of this column discussed the pathophysiology of hypersensitivity reactions and described the development of desensitization protocols in oncology settings. Part II incorporates the experiences of an academic medical center and provides a practical guide for the nursing care of patients undergoing chemotherapy desensitization.
.

  8. High Performance Liquid Chromatography/Video Fluorometry. Part II. Applications.

    DTIC Science & Technology

    1981-09-30

    HIGH PERFORMANCE LIQUID CHROMATOGRAPHY /VIDEO FLUOROMETRY. PART...REP«T_N&:-ŗ/ High Performance Liquid Chromatography /Video Fluorometry» Part II. Applications« by | Dennis C./Shelly* Michael P./Vogarty and...Data EnlirtdJ REPORT DOCUMENTATION PAGE t. REPORT NUMBER 2 GOVT ACCESSION NO 4. T1TI.F (and Submit) lP-^fffsyva High Performance Liquid Chromatography

  9. Curriculum Guide for Hospitality Education. Part II. Exemplary Project.

    ERIC Educational Resources Information Center

    Kalani, Henry

    This second of a two-part study designed to develop a hospitality education program model for Hawaii's community colleges is based on the primary data gathered in a survey of the hospitality industry characteristics, manpower requirements, and employment demands. (Survey data is reported in volume 1 of the study.) The introductory section of this…

  10. Observations on medical device design, Part II: Good practice.

    PubMed

    Alexander, K; Clarkson, J; Bishop, D

    1999-10-01

    Current guidance on design is inadequate. This second article in a two-part series presents a framework for good design practice that attempts to improve designers' awareness of manufacturing and validation issues. Seven design tactics, derived from observations of current industry practice and design literature, seek to encourage good practice and achieve safer, more profitable devices.

  11. Curriculum Guide for Hospitality Education. Part II. Exemplary Project.

    ERIC Educational Resources Information Center

    Kalani, Henry

    This second of a two-part study designed to develop a hospitality education program model for Hawaii's community colleges is based on the primary data gathered in a survey of the hospitality industry characteristics, manpower requirements, and employment demands. (Survey data is reported in volume 1 of the study.) The introductory section of this…

  12. Ethical Research Practices: Collaborative Action Research, Part II

    ERIC Educational Resources Information Center

    Calvin, Chris

    2004-01-01

    This is part II of a case study involving a large federally funded technology grant program implemented across several central Texas school districts and was followed by the researcher-participant at the university level as well as one of the campus sites. Many ethical research questions were raised during this study such as the use of participant…

  13. An analysis of the lumber planning process: Part II

    Treesearch

    Peter Koch

    1956-01-01

    This study is part II of an investigation pertaining to the peripheral-milling process of planing lumber. Some relationships were determined between cutterhead horsepower and various combinations of specimen, cutterhead, and feed factors. Power demand curves were interpreted through comparison with simultaneously taken one micro-second photos of the forming chips....

  14. Lubrication handbook for use in the space industry. Part A: Solid lubricants. Part B: Liquid lubricants

    NASA Technical Reports Server (NTRS)

    Campbell, M. E.; Thompson, M. B.

    1972-01-01

    This handbook provides a ready reference for many of the solid and liquid lubricants used in the space industry. Lubricants and lubricant properties are arranged systematically so that designers, engineers, and maintenance personnel in the space industry can conveniently locate data needed for their work. The handbook is divided into two major parts. Part A is a compilation of chemical and physical property data of more than 250 solid lubricants, bonded solid lubricants, dispersions and composites. Part B is a compilation of chemical and physical property data of more than 250 liquid lubricants, greases, oils, compounds and fluids. The listed materials cover a broad spectrum, from manufacturing and ground support to hardware applications for missiles and spacecraft.

  15. Midstream modulation in biotechnology industry: redefining what is 'part of the job' of researchers in industry.

    PubMed

    Flipse, Steven M; van der Sanden, Maarten C A; Osseweijer, Patricia

    2013-09-01

    In response to an increasing amount of policy papers stressing the need for integrating social and ethical aspects in Research and Development (R&D) practices, science studies scholars have conducted integrative research and experiments with science and innovation actors. One widely employed integration method is Midstream Modulation (MM), in which an 'embedded humanist' interacts in regular meetings with researchers to engage them with the social and ethical aspects of their work. While the possibility of using MM to enhance critical reflection has been demonstrated in academic settings, few attempts have been made to examine its appropriateness in industry. This paper describes the outcomes of a case study aiming to find out firstly whether MM can effectively be deployed to encourage and facilitate researchers to actively include social and ethical aspects in their daily R&D practice, and secondly to what extent the integration activities could form an integral part of the engaged industrial researchers' professional activities. Our data show that after MM, researchers display increased reflexive awareness on the social and ethical aspects of their work and acknowledge the relevance and utility of such aspects on their daily practice. Also, all participants considered actively reflecting on social and ethical aspects to be part of their work. Future research on the role of MM in industrial settings could focus on how to embed social and ethical integration as a regular part of innovation practice. We suggest that one possibility would be through aligning social and ethical aspects with innovation Key Performance Indicators.

  16. 40 CFR Appendix II to Part 257 - Appendix II to Part 257

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... to Part 257 A. Processes To Significantly Reduce Pathogens Aerobic digestion: The process is... of which temperatures average on a daily basis above 0 °C. Anaerobic digestion: The process is...: Liquid sludge is heated to temperatures of 180 °C for 30 minutes. Thermophilic Aerobic Digestion:...

  17. 40 CFR Appendix II to Part 257 - Appendix II to Part 257

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... to Part 257 A. Processes To Significantly Reduce Pathogens Aerobic digestion: The process is... of which temperatures average on a daily basis above 0 °C. Anaerobic digestion: The process is...: Liquid sludge is heated to temperatures of 180 °C for 30 minutes. Thermophilic Aerobic Digestion:...

  18. 40 CFR Appendix II to Part 257 - Appendix II to Part 257

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... to Part 257 A. Processes To Significantly Reduce Pathogens Aerobic digestion: The process is... of which temperatures average on a daily basis above 0 °C. Anaerobic digestion: The process is...: Liquid sludge is heated to temperatures of 180 °C for 30 minutes. Thermophilic Aerobic Digestion:...

  19. The Nature of Reinforcement: Part I. (Volume I), Part II. (Volume II).

    ERIC Educational Resources Information Center

    Glaser, Robert, Ed.

    Part One of this report describes the first half of a conference, designed to examine the nature of reinforcement, which was held at the University of Pittsburgh in June 1969. The topics discussed include: "Reward in Human Learning: Theoretical Issues and Strategic Choice Points"; "Are Reinforcement Concepts Able to Provide Reinforcement for…

  20. The Value of Imaging Part II: Value beyond Image Interpretation.

    PubMed

    Duong, Phuong-Anh T; Pastel, David A; Sadigh, Gelareh; Ballard, David; Sullivan, Joseph C; Bresnahan, Brian; Buch, Karen; Duszak, Richard

    2016-01-01

    Although image interpretation is an essential part of radiologists' value, there are other ways in which we contribute to patient care. Part II of the value of imaging series reviews current initiatives that demonstrate value beyond the image interpretation. Standardizing processes, reducing the radiation dose of our examinations, clarifying written reports, improving communications with patients and providers, and promoting appropriate imaging through decision support are all ways we can provide safer, more consistent, and higher quality care. As payers and policy makers push to drive value, research that demonstrates the value of these endeavors, or lack thereof, will become increasingly sought after and supported.

  1. Probabilistic finite-state machines--part II.

    PubMed

    Vidal, Enrique; Thollard, Frank; de la Higuera, Colin; Casacuberta, Francisco; Carrasco, Rafael C

    2005-07-01

    Probabilistic finite-state machines are used today in a variety of areas in pattern recognition or in fields to which pattern recognition is linked. In Part I of this paper, we surveyed these objects and studied their properties. In this Part II, we study the relations between probabilistic finite-state automata and other well-known devices that generate strings like hidden Markov models and n-grams and provide theorems, algorithms, and properties that represent a current state of the art of these objects.

  2. Treatment of cellulite: Part II. Advances and controversies.

    PubMed

    Khan, Misbah H; Victor, Frank; Rao, Babar; Sadick, Neil S

    2010-03-01

    Treatments for localized adiposities range from topical creams to liposuction. Most treatments lack a substantial proof of efficacy. The unpredictable treatment outcome can be related to the fact that cellulite adipose tissue is physiologically and biochemically different from subcutaneous tissue found elsewhere in the body. Part II of this two-part series on cellulite reviews the various treatment options that are currently available for human adipose tissue including, but not limited to, cellulite. It also focuses on newer techniques that can be potentially useful in the future for the treatment of cellulite. Copyright 2010 American Academy of Dermatology, Inc. Published by Mosby, Inc. All rights reserved.

  3. Recent advances in small bowel diseases: Part II

    PubMed Central

    Thomson, Alan BR; Chopra, Angeli; Clandinin, Michael Tom; Freeman, Hugh

    2012-01-01

    As is the case in all areas of gastroenterology and hepatology, in 2009 and 2010 there were many advances in our knowledge and understanding of small intestinal diseases. Over 1000 publications were reviewed, and the important advances in basic science as well as clinical applications were considered. In Part II we review six topics: absorption, short bowel syndrome, smooth muscle function and intestinal motility, tumors, diagnostic imaging, and cystic fibrosis. PMID:22807605

  4. Feedback Flow Control for a Pitching Turret (Part II) (POSTPRINT)

    DTIC Science & Technology

    2010-01-01

    imposes no penalty on the control input. VII. Closed-loop Control Run with an Advanced Controller Three compensators ( LQR regulators with Kalman...AFRL-RB-WP-TP-2010-3024 FEEDBACK FLOW CONTROL FOR A PITCHING TURRET (PART II) (POSTPRINT) T. Vaithianathan and H.A. Carlson Clear...display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THE ABOVE ADDRESS. 1. REPORT DATE (DD-MM-YY) 2. REPORT TYPE 3

  5. Feasibility of Screening for Antibiotic Resistance-Part II

    DTIC Science & Technology

    2005-08-01

    antibiotic resistance - T +31 15 28 43000 F +31 152843991 part II Info-DenV@tno.nl Date August 2005 Author(s) M.P. Broekhuijsen, W.C.M. van Dijk...ciprofloxacineresistentie. Beide, De ontworpen methode kan nog verder methoden werden getest op kunstmatig worden verbeterd, en worden toegepast op een resistent ...resultaat te zettn. c otworen ethd erken ood behalen is. Deze mutatie-analysemethode is op de twee kunstmatig resistent gemaalcte tevens geschikter voor

  6. Lubrication handbook for the space industry. Part A: Solid lubricants. Part B: Liquid lubricants

    NASA Technical Reports Server (NTRS)

    Mcmurtrey, E. L.

    1985-01-01

    This handbook is intended to provide a ready reference for many of the solid and liquid lubricants used in the space industry. Lubricants and lubricant properties are arranged systematically so that designers, engineers, and maintenance personnel can conveniently locate data needed for their work. This handbook is divided into two major parts (A and B). Part A is a compilation of solid lubricant suppliers information on chemical and physical property of data of more than 250 solid lubricants, bonded solid lubricants, dispersions, and composites. Part B is a compilation of chemical and physical porperty data of more then 250 liquid lubricants, greases, oils, compounds, and fluids. The listed materials cover a broad spectrum from manufacturing and ground support to hardware applications of spacecraft.

  7. Gas Atomization of Amorphous Aluminum Powder: Part II. Experimental Investigation

    NASA Astrophysics Data System (ADS)

    Zheng, Baolong; Lin, Yaojun; Zhou, Yizhang; Lavernia, Enrique J.

    2009-12-01

    The optimal processing parameters that are required to atomize amorphous Al were established on the basis of numerical simulations in part I of this study. In this part II, the characterization of cooling rate experienced by gas-atomized, Al-based amorphous powders was studied via experiments. An experimental investigation was implemented to validate the numerical predictions reported in part I of this study. The cooling rate experienced by the powders, for example, was experimentally determined on the basis of dendrite arm spacing correlations, and the results were compared with the numerical predictions. The experimental studies were completed using commercial Al 2024 as a baseline material and Al90Gd7Ni2Fe1 metallic glass (MG). The results showed that the cooling rate of droplets increases with decreasing particle size, with an increasing proportion of helium in the atomization gas and with increasing melt superheat. The experimental results reported in this article suggest good agreement between experiments and numerical simulations.

  8. Polycystic ovary syndrome: a review for dermatologists: Part II. Treatment.

    PubMed

    Buzney, Elizabeth; Sheu, Johanna; Buzney, Catherine; Reynolds, Rachel V

    2014-11-01

    Dermatologists are in a key position to treat the manifestations of polycystic ovary syndrome (PCOS). The management of PCOS should be tailored to each woman's specific goals, reproductive interests, and particular constellation of symptoms. Therefore, a multidisciplinary approach is recommended. In part II of this continuing medical education article, we present the available safety and efficacy data regarding treatments for women with acne, hirsutism, and androgenetic alopecia. Therapies discussed include lifestyle modification, topical therapies, combined oral contraceptives, antiandrogen agents, and insulin-sensitizing drugs. Treatment recommendations are made based on the current available evidence.

  9. The "Pseudocommando" mass murderer: part II, the language of revenge.

    PubMed

    Knoll, James L

    2010-01-01

    In Part I of this article, research on pseudocommandos was reviewed, and the important role that revenge fantasies play in motivating such persons to commit mass murder-suicide was discussed. Before carrying out their mass shootings, pseudocommandos may communicate some final message to the public or news media. These communications are rich sources of data about their motives and psychopathology. In Part II of this article, forensic psycholinguistic analysis is applied to clarify the primary motivations, detect the presence of mental illness, and discern important individual differences in the final communications of two recent pseudocommandos: Seung-Hui Cho (Virginia Tech) and Jiverly Wong (Binghamton, NY). Although both men committed offenses that qualify them as pseudocommandos, their final communications reveal striking differences in their psychopathology.

  10. CE and nanomaterials - Part II: Nanomaterials in CE.

    PubMed

    Adam, Vojtech; Vaculovicova, Marketa

    2017-10-01

    The scope of this two-part review is to summarize publications dealing with CE and nanomaterials together. This topic can be viewed from two broad perspectives, and this article is trying to highlight these two approaches: (i) CE of nanomaterials, and (ii) nanomaterials in CE. The second part aims at summarization of publications dealing with application of nanomaterials for enhancement of CE performance either in terms of increasing the separation resolution or for improvement of the detection. To increase the resolution, nanomaterials are employed as either surface modification of the capillary wall forming open tubular column or as additives to the separation electrolyte resulting in a pseudostationary phase. Moreover, nanomaterials have proven to be very beneficial for increasing also the sensitivity of detection employed in CE or even they enable the detection (e.g., fluorescent tags of nonfluorescent molecules). © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  11. Repair of articular cartilage defects: part II. Treatment options.

    PubMed

    Chen, F S; Frenkel, S R; Di Cesare, P E

    1999-02-01

    Articular cartilage injuries result in numerous clinical symptoms, such as pain and decreased functional levels. Current therapeutic options being used include articular surface debridement, such as chondral shaving, abrasion chondroplasty, and subchondral perforation; soft-tissue arthroplasties, such as perichondrial and periosteal grafts; and osteochondral transplantation. None of these therapies, however, has resulted in the successful regeneration of a hyaline-like tissue that withstands normal joint loading and activity over prolonged periods. As a result, research is also being conducted on alternative therapeutic procedures to enhance the repair process and to stimulate the regeneration of a repair tissue with hyaline-like structural and biologic properties. Part I of this paper, which was published in January, discussed the basic science of cartilage healing. Part II presents the treatment options.

  12. Structure Learning and Statistical Estimation in Distribution Networks - Part II

    SciTech Connect

    Deka, Deepjyoti; Backhaus, Scott N.; Chertkov, Michael

    2015-02-13

    Limited placement of real-time monitoring devices in the distribution grid, recent trends notwithstanding, has prevented the easy implementation of demand-response and other smart grid applications. Part I of this paper discusses the problem of learning the operational structure of the grid from nodal voltage measurements. In this work (Part II), the learning of the operational radial structure is coupled with the problem of estimating nodal consumption statistics and inferring the line parameters in the grid. Based on a Linear-Coupled(LC) approximation of AC power flows equations, polynomial time algorithms are designed to identify the structure and estimate nodal load characteristics and/or line parameters in the grid using the available nodal voltage measurements. Then the structure learning algorithm is extended to cases with missing data, where available observations are limited to a fraction of the grid nodes. The efficacy of the presented algorithms are demonstrated through simulations on several distribution test cases.

  13. Kinetics of the zinc slag-Fuming process: Part i. industrial measurements

    NASA Astrophysics Data System (ADS)

    Richards, G. G.; Brimacombe, J. K.; Toop, G. W.

    1985-09-01

    A study involving industrial measurements and mathematical modeling has been conducted to eluci-date kinetic phenomena in the zinc slag fuming process. In the first part of this three-part paper, the results of industrial measurements and observations are presented. In Part II a mathematical model of the process is developed, and finally in Part III the implications of a kinetic conception of the process for process improvement are explored. The industrial work consisted primarily of slag sampling through the fuming cycles of five different fuming operations. In addition, tuyere back-pressure mea-surements, tuyere photography using a tuyerescope, and sampling of the fume product were under-taken at one operation. Analysis of the slag samples has shown that, in general, the zinc elimination curve is linear with time and that a portion of the injected coal entrains in the slag. Analysis of tuyere back-pressure fluctuations and movie photographs of the tuyere tip indicate that the coal-air mixture enters the slag in the form of discrete bubbles. From these results it can be deduced that the fuming furnace consists of two reaction zones which are created by the division of coal between the slag and the tuyere gas stream. The coal entrained in the slag reduces ZnO and Fe3O4 in a “reduction zone” which is responsible for fuming. The coal remaining in the tuyere gas stream combusts in an “oxidation zone” although a fraction passes through the bath unconsumed and reports to the solid products. The oxidation zone supplies heat to the endothermic reduction reactions and heat losses.

  14. [The Mexican consensus on gastroesophageal reflux disease. Part II].

    PubMed

    Huerta-Iga, F; Tamayo-de la Cuesta, J L; Noble-Lugo, A; Hernández-Guerrero, A; Torres-Villalobos, G; Ramos-de la Medina, A; Pantoja-Millán, J P

    2013-01-01

    To update the themes of endoscopic and surgical treatment of Gastroesophageal Reflux Disease (GERD) from the Mexican Consensus published in 2002. Part I of the 2011 Consensus dealt with the general concepts, diagnosis, and medical treatment of this disease. Part II covers the topics of the endoscopic and surgical treatment of GERD. In this second part, an expert in endoscopy and an expert in GERD surgery, along with the three general coordinators of the consensus, carried out an extensive bibliographic review using the Embase, Cochrane, and Medline databases. Statements referring to the main aspects of endoscopic and surgical treatment of this disease were elaborated and submitted to specialists for their consideration and vote, utilizing the modified Delphi method. The statements were accepted into the consensus if the level of agreement was 67% or higher. Twenty-five statements corresponding to the endoscopic and surgical treatment of GERD resulted from the voting process, and they are presented herein as Part II of the consensus. The majority of the statements had an average level of agreement approaching 90%. Currently, endoscopic treatment of GERD should not be regarded as an option, given that the clinical results at 3 and 5 years have not demonstrated durability or sustained symptom remission. The surgical indications for GERD are well established; only those patients meeting the full criteria should be candidates and their surgery should be performed by experts. Copyright © 2012 Asociación Mexicana de Gastroenterología. Published by Masson Doyma México S.A. All rights reserved.

  15. PREREM: an interactive data preprocessing code for INREM II. Part I: user's manual. Part II: code structure

    SciTech Connect

    Ryan, M.T.; Fields, D.E.

    1981-05-01

    PREREM is an interactive computer code developed as a data preprocessor for the INREM-II (Killough, Dunning, and Pleasant, 1978a) internal dose program. PREREM is intended to provide easy access to current and self-consistent nuclear decay and radionuclide-specific metabolic data sets. Provision is made for revision of metabolic data, and the code is intended for both production and research applications. Documentation for the code is in two parts. Part I is a user's manual which emphasizes interpretation of program prompts and choice of user input. Part II stresses internal structure and flow of program control and is intended to assist the researcher who wishes to revise or modify the code or add to its capabilities. PREREM is written for execution on a Digital Equipment Corporation PDP-10 System and much of the code will require revision before it can be run on other machines. The source program length is 950 lines (116 blocks) and computer core required for execution is 212 K bytes. The user must also have sufficient file space for metabolic and S-factor data sets. Further, 64 100 K byte blocks of computer storage space are required for the nuclear decay data file. Computer storage space must also be available for any output files produced during the PREREM execution. 9 refs., 8 tabs.

  16. The year's new drugs & biologics 2014 - Part II: trends & challenges.

    PubMed

    Graul, A I; Serebrov, M; Cruces, E; Tracy, M; Dulsat, C

    2015-02-01

    2014 was a year of continued high activity in the pharma and biotech industry, as evidenced in part I of this annual two-part review article published last month in this journal (1). As of December 23, 2014, a total of 55 new chemical and biological entities had reached their first markets worldwide, together with another 29 important new line extensions. Another 19 products were approved for the first time during the year but not yet launched by December 23. Furthermore, during the now-traditional year-end sprint, several regulatory agencies issued last-minute approvals for other compounds that missed the deadline for inclusion in that article, bringing the total of new approvals for the year to a somewhat higher number. In addition to the successful development, registration and launch of new drugs and biologics, there are various other trends and tendencies that serve as indicators of the overall health and status of the industry. These include the pursuit of novel programs designed by regulators to stimulate the development of drugs for diseases that are currently under-treated; the regular and pragmatic culling by companies of their R&D pipelines; and the decision to unify pipelines, portfolios and sales forces through mergers and acquisitions.

  17. Blade System Design Study. Part II, final project report (GEC).

    SciTech Connect

    Griffin, Dayton A.

    2009-05-01

    As part of the U.S. Department of Energy's Low Wind Speed Turbine program, Global Energy Concepts LLC (GEC)1 has studied alternative composite materials for wind turbine blades in the multi-megawatt size range. This work in one of the Blade System Design Studies (BSDS) funded through Sandia National Laboratories. The BSDS program was conducted in two phases. In the Part I BSDS, GEC assessed candidate innovations in composite materials, manufacturing processes, and structural configurations. GEC also made recommendations for testing composite coupons, details, assemblies, and blade substructures to be carried out in the Part II study (BSDS-II). The BSDS-II contract period began in May 2003, and testing was initiated in June 2004. The current report summarizes the results from the BSDS-II test program. Composite materials evaluated include carbon fiber in both pre-impregnated and vacuum-assisted resin transfer molding (VARTM) forms. Initial thin-coupon static testing included a wide range of parameters, including variation in manufacturer, fiber tow size, fabric architecture, and resin type. A smaller set of these materials and process types was also evaluated in thin-coupon fatigue testing, and in ply-drop and ply-transition panels. The majority of materials used epoxy resin, with vinyl ester (VE) resin also used for selected cases. Late in the project, testing of unidirectional fiberglass was added to provide an updated baseline against which to evaluate the carbon material performance. Numerous unidirectional carbon fabrics were considered for evaluation with VARTM infusion. All but one fabric style considered suffered either from poor infusibility or waviness of fibers combined with poor compaction. The exception was a triaxial carbon-fiberglass fabric produced by SAERTEX. This fabric became the primary choice for infused articles throughout the test program. The generally positive results obtained in this program for the SAERTEX material have led to its being

  18. 76 FR 55947 - Industrial Relations Promotion Project, Phase II in Vietnam

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-09-09

    ... of the Secretary Industrial Relations Promotion Project, Phase II in Vietnam AGENCY: Bureau of... funded.. DAI, through its Industrial Relations Promotion Project (IRRP), is the only organization that... disputes and sound industrial relations by developing approaches in cooperation with trade unions/worker...

  19. A Survey of Optometry Graduates to Determine Practice Patterns: Part II: Licensure and Practice Establishment Experiences.

    ERIC Educational Resources Information Center

    Bleimann, Robert L.; Smith, Lee W.

    1985-01-01

    A summary of Part II of a two-volume study of optometry graduates conducted by the Association of Schools and Colleges of Optometry is presented. Part II includes the analysis of the graduates' licensure and practice establishment experiences. (MLW)

  20. 40 CFR Appendix II to Part 1054 - Duty Cycles for Laboratory Testing

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 34 2013-07-01 2013-07-01 false Duty Cycles for Laboratory Testing II Appendix II to Part 1054 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR.... 1054, App. II Appendix II to Part 1054—Duty Cycles for Laboratory Testing (a) Test handheld...

  1. 40 CFR Appendix II to Part 1054 - Duty Cycles for Laboratory Testing

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 33 2011-07-01 2011-07-01 false Duty Cycles for Laboratory Testing II Appendix II to Part 1054 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR.... 1054, App. II Appendix II to Part 1054—Duty Cycles for Laboratory Testing (a) Test handheld...

  2. 40 CFR Appendix II to Part 1054 - Duty Cycles for Laboratory Testing

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 32 2010-07-01 2010-07-01 false Duty Cycles for Laboratory Testing II Appendix II to Part 1054 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR.... 1054, App. II Appendix II to Part 1054—Duty Cycles for Laboratory Testing (a) Test handheld...

  3. 40 CFR Appendix II to Part 1054 - Duty Cycles for Laboratory Testing

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 34 2012-07-01 2012-07-01 false Duty Cycles for Laboratory Testing II Appendix II to Part 1054 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR.... 1054, App. II Appendix II to Part 1054—Duty Cycles for Laboratory Testing (a) Test handheld...

  4. 40 CFR Appendix II to Part 1054 - Duty Cycles for Laboratory Testing

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 33 2014-07-01 2014-07-01 false Duty Cycles for Laboratory Testing II Appendix II to Part 1054 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR.... 1054, App. II Appendix II to Part 1054—Duty Cycles for Laboratory Testing (a) Test handheld...

  5. 31 CFR Appendix II(f) to Part 13 - Overhead and Administrative Costs

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 31 Money and Finance: Treasury 1 2010-07-01 2010-07-01 false Overhead and Administrative Costs II(F) Appendix II(F) to Part 13 Money and Finance: Treasury Office of the Secretary of the Treasury... Pt. 13, App. II(F) Appendix II(F) to Part 13—Overhead and Administrative Costs Date: Select Only...

  6. 31 CFR Appendix II(f) to Part 13 - Overhead and Administrative Costs

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 31 Money and Finance: Treasury 1 2011-07-01 2011-07-01 false Overhead and Administrative Costs II(F) Appendix II(F) to Part 13 Money and Finance: Treasury Office of the Secretary of the Treasury... Pt. 13, App. II(F) Appendix II(F) to Part 13—Overhead and Administrative Costs Date: Select Only...

  7. 12 CFR Appendix II to Part 27 - Information for Government Monitoring Purposes

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 12 Banks and Banking 1 2010-01-01 2010-01-01 false Information for Government Monitoring Purposes II Appendix II to Part 27 Banks and Banking COMPTROLLER OF THE CURRENCY, DEPARTMENT OF THE TREASURY FAIR HOUSING HOME LOAN DATA SYSTEM Pt. 27, App. II Appendix II to Part 27—Information for Government...

  8. 40 CFR Appendix II to Part 92 - Interpretive Ruling for § 92.705-Remedial Plans

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...-Remedial Plans II Appendix II to Part 92 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY..., App. II Appendix II to Part 92—Interpretive Ruling for § 92.705—Remedial Plans The following is an... manufacturers to better enable them to submit acceptable remedial plans. (2) Section 207(c)(1) requires the...

  9. 10 CFR Appendix II to Part 960 - NRC and EPA Requirements for Preclosure Repository Performance

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 4 2011-01-01 2011-01-01 false NRC and EPA Requirements for Preclosure Repository Performance II Appendix II to Part 960 Energy DEPARTMENT OF ENERGY GENERAL GUIDELINES FOR THE PRELIMINARY SCREENING OF POTENTIAL SITES FOR A NUCLEAR WASTE REPOSITORY Pt. 960, App. II Appendix II to Part 960—NRC...

  10. 10 CFR Appendix II to Part 960 - NRC and EPA Requirements for Preclosure Repository Performance

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 4 2014-01-01 2014-01-01 false NRC and EPA Requirements for Preclosure Repository Performance II Appendix II to Part 960 Energy DEPARTMENT OF ENERGY GENERAL GUIDELINES FOR THE PRELIMINARY SCREENING OF POTENTIAL SITES FOR A NUCLEAR WASTE REPOSITORY Pt. 960, App. II Appendix II to Part 960—NRC...

  11. 10 CFR Appendix II to Part 960 - NRC and EPA Requirements for Preclosure Repository Performance

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 4 2012-01-01 2012-01-01 false NRC and EPA Requirements for Preclosure Repository Performance II Appendix II to Part 960 Energy DEPARTMENT OF ENERGY GENERAL GUIDELINES FOR THE PRELIMINARY SCREENING OF POTENTIAL SITES FOR A NUCLEAR WASTE REPOSITORY Pt. 960, App. II Appendix II to Part 960—NRC...

  12. 10 CFR Appendix II to Part 960 - NRC and EPA Requirements for Preclosure Repository Performance

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false NRC and EPA Requirements for Preclosure Repository Performance II Appendix II to Part 960 Energy DEPARTMENT OF ENERGY GENERAL GUIDELINES FOR THE PRELIMINARY SCREENING OF POTENTIAL SITES FOR A NUCLEAR WASTE REPOSITORY Pt. 960, App. II Appendix II to Part 960—NRC...

  13. 10 CFR Appendix II to Part 960 - NRC and EPA Requirements for Preclosure Repository Performance

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 4 2013-01-01 2013-01-01 false NRC and EPA Requirements for Preclosure Repository Performance II Appendix II to Part 960 Energy DEPARTMENT OF ENERGY GENERAL GUIDELINES FOR THE PRELIMINARY SCREENING OF POTENTIAL SITES FOR A NUCLEAR WASTE REPOSITORY Pt. 960, App. II Appendix II to Part 960—NRC...

  14. The Evolution of University and Industry Research Relationships. Part I.

    ERIC Educational Resources Information Center

    Allen, Martha L.; And Others

    1989-01-01

    Presented is a review of the literature on the development of university and industry research cooperation and conflict up to the early 1980's. The founding of both research universities and industrial America, two world wars, the space race, and protest movements provide points of reference for this period. (MVL)

  15. Mammalian Toxicity of Munitions Compounds. Phase II. Effects of Multiple Doses Part II. 2,4-Dinitrotoluene

    DTIC Science & Technology

    1978-11-01

    II: Effects of Multiple Doses Part !I: 2,4-T)initrotoiuene I Progres Report No. 3 oNovember 1978 by 3I Cheng-Chun Lee U Hirty V. Ellis, III Jo.,n J...Sciences Division November 1978 vii :. •I~~~~AMMALIAN TOXICITY OF MUNITIONS COMPOUNDS ... ... PHASE IIz Effects of Multiple Doses m . ............... PART...161 xi MAMOMALIAN TOXICITY OF MUNITION COMPOUNDS PHASE II: Effects of Multiple Dones PART II: 2,4

  16. Mineral resources of parts of the Departments of Antioquia and Caldas, Zone II, Colombia

    USGS Publications Warehouse

    Hall, R.B.; Feininger, Tomas; Barrero, L.; Dario, Rico H.; ,; Alvarez, A.

    1970-01-01

    The mineral resources of an area of 40,000 sq km, principally in the Department of Antioquia, but including small parts of the Departments of Caldas, C6rdoba, Risaralda, and Tolima, were investigated during the period 1964-68. The area is designated Zone II by the Colombian Inventario Minero Nacional(lMN). The geology of approximately 45 percent of this area, or 18,000 sq km, has been mapped by IMN. Zone II has been a gold producer for centuries, and still produces 75 percent of Colombia's gold. Silver is recovered as a byproduct. Ferruginous laterites have been investigated as potential sources of iron ore but are not commercially exploitable. Nickeliferous laterite on serpentinite near Ure in the extreme northwest corner of the Zone is potentially exploitable, although less promising than similar laterites at Cerro Matoso, north of the Zone boundary. Known deposits of mercury, chromium, manganese, and copper are small and have limited economic potentia1. Cement raw materials are important among nonmetallic resources, and four companies are engaged in the manufacture of portland cement. The eastern half of Zone II contains large carbonate rock reserves, but poor accessibility is a handicap to greater development at present. Dolomite near Amalfi is quarried for the glass-making and other industries. Clay saprolite is abundant and widely used in making brick and tiles in backyard kilns. Kaolin of good quality near La Union is used by the ceramic industry. Subbituminous coal beds of Tertiary are an important resource in the western part of the zone and have good potential for greater development. Aggregate materials for construction are varied and abundant. Deposits of sodic feldspar, talc, decorative stone, and silica are exploited on a small scale. Chrysotils asbestos deposits north of Campamento are being developed to supply fiber for Colombia's thriving asbestos-cement industry, which is presently dependent upon imported fiber. Wollastonite and andalusite are

  17. 49 CFR Appendix A-Ii to Part 541 - Lines With Antitheft Devices Which Are Exempted in-Part From the Parts-Marking Requirements of...

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 6 2010-10-01 2010-10-01 false Lines With Antitheft Devices Which Are Exempted in-Part From the Parts-Marking Requirements of This Standard Pursuant to 49 CFR Part 543 A Appendix A-II... STANDARD Pt. 541, App. A-II Appendix A-II to Part 541—Lines With Antitheft Devices Which Are Exempted...

  18. 49 CFR Appendix A-Ii to Part 541 - Lines With Antitheft Devices Which Are Exempted in-Part From the Parts-Marking Requirements of...

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 6 2011-10-01 2011-10-01 false Lines With Antitheft Devices Which Are Exempted in-Part From the Parts-Marking Requirements of This Standard Pursuant to 49 CFR Part 543 A Appendix A-II... STANDARD Pt. 541, App. A-II Appendix A-II to Part 541—Lines With Antitheft Devices Which Are Exempted...

  19. 77 FR 60743 - Proposed Collection; Comment Request for Schedule F, Part II and III (Form 1040)

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-10-04

    ... Internal Revenue Service Proposed Collection; Comment Request for Schedule F, Part II and III (Form 1040... Law 104-13 (44 U.S.C. 3506(c)(2)(A)). Currently, the IRS is soliciting comments concerning Schedule F... Number: Schedule F, Part II and III (Form 1040). Abstract: Schedule F, Part II and III (Form 1040)...

  20. Challenges of Implementing a Joint Industrial-Academic Research Project as Part of a Nontraditional Industrial Ph.D. Dissertation

    ERIC Educational Resources Information Center

    Seay, Jeffrey R.; Eden, Mario R.

    2008-01-01

    This contribution will address the challenges of implementing a collaborative research project between industry and academia as part of an industrial Ph.D. dissertation. The research project is a collaboration between Evonik Degussa, Auburn University, and the University of South Alabama. This work will outline the challenges of integrating all…

  1. Fast transforms for acoustic imaging--part II: applications.

    PubMed

    Ribeiro, Flávio P; Nascimento, Vítor H

    2011-08-01

    In Part I ["Fast Transforms for Acoustic Imaging-Part I: Theory," IEEE Transactions on Image Processing], we introduced the Kronecker array transform (KAT), a fast transform for imaging with separable arrays. Given a source distribution, the KAT produces the spectral matrix which would be measured by a separable sensor array. In Part II, we establish connections between the KAT, beamforming and 2-D convolutions, and show how these results can be used to accelerate classical and state of the art array imaging algorithms. We also propose using the KAT to accelerate general purpose regularized least-squares solvers. Using this approach, we avoid ill-conditioned deconvolution steps and obtain more accurate reconstructions than previously possible, while maintaining low computational costs. We also show how the KAT performs when imaging near-field source distributions, and illustrate the trade-off between accuracy and computational complexity. Finally, we show that separable designs can deliver accuracy competitive with multi-arm logarithmic spiral geometries, while having the computational advantages of the KAT.

  2. Antiviral medication in sexually transmitted diseases. Part II: HIV.

    PubMed

    Majewska, Anna; Mlynarczyk-Bonikowska, Beata; Malejczyk, Magdalena; Mlynarczyk, Grazyna; Majewski, Slawomir

    2015-01-01

    This is a second part of a review under a main title Antiviral medication in sexually transmitted diseases. In the part we published in Mini Rev Med Chem. 2013,13(13):1837-45, we have described mechanisms of action and mechanism of resistance to antiviral agents used in genital herpes and genital HPV infection. The Part II review focuses on therapeutic options in HIV infection. In 1987, 6 years after the recognition of AIDS, the FDA approved the first drug against HIV--zidovudine. Since then a lot of antiretroviral drugs are available. The most effective treatment for HIV is highly active antiretroviral therapy--a combination of several antiretroviral medicines that cause a reduction of HIV blood concentration and often results in substantial recovery of impaired immunologic function. At present, there are over 20 drugs licensed and used for the treatment of HIV/AIDS, and these drugs are divided into one of six classes. Investigational agents include GS-7340, the prodrug of tenofovir and BMS-663068--the first in a novel class of drugs that blocks the binding of the HIV gp120 to the CD4 receptor.

  3. Bayesian inference for psychology. Part II: Example applications with JASP.

    PubMed

    Wagenmakers, Eric-Jan; Love, Jonathon; Marsman, Maarten; Jamil, Tahira; Ly, Alexander; Verhagen, Josine; Selker, Ravi; Gronau, Quentin F; Dropmann, Damian; Boutin, Bruno; Meerhoff, Frans; Knight, Patrick; Raj, Akash; van Kesteren, Erik-Jan; van Doorn, Johnny; Šmíra, Martin; Epskamp, Sacha; Etz, Alexander; Matzke, Dora; de Jong, Tim; van den Bergh, Don; Sarafoglou, Alexandra; Steingroever, Helen; Derks, Koen; Rouder, Jeffrey N; Morey, Richard D

    2017-07-06

    Bayesian hypothesis testing presents an attractive alternative to p value hypothesis testing. Part I of this series outlined several advantages of Bayesian hypothesis testing, including the ability to quantify evidence and the ability to monitor and update this evidence as data come in, without the need to know the intention with which the data were collected. Despite these and other practical advantages, Bayesian hypothesis tests are still reported relatively rarely. An important impediment to the widespread adoption of Bayesian tests is arguably the lack of user-friendly software for the run-of-the-mill statistical problems that confront psychologists for the analysis of almost every experiment: the t-test, ANOVA, correlation, regression, and contingency tables. In Part II of this series we introduce JASP ( http://www.jasp-stats.org ), an open-source, cross-platform, user-friendly graphical software package that allows users to carry out Bayesian hypothesis tests for standard statistical problems. JASP is based in part on the Bayesian analyses implemented in Morey and Rouder's BayesFactor package for R. Armed with JASP, the practical advantages of Bayesian hypothesis testing are only a mouse click away.

  4. Opportunities for the chemical industry in space, part 1

    NASA Technical Reports Server (NTRS)

    1984-01-01

    The chemical/petrochemical industry devotes a large percentage of its gross income to research and development, with much of its R and D of a long-term nature. As the chemical industry is examined as a candidate for space investigations, it is readily apparent that research and development in the space environment may lead to attractive commercial opportunities. The advantages of low gravity manufacturing, with a particular emphasis on chemical catalysts, are presented herein specifically for the chemical industry. Research from the Skylab program and Apollo Soyuz test project is reviewed, including acoustic levitation, crystal growth, and container less melts. Space processing of composite materials, alloys, and coatings is also discussed.

  5. What's new in pediatric dermatology?: part II. Treatment.

    PubMed

    Pride, Howard B; Tollefson, Megha; Silverman, Robert

    2013-06-01

    The field of pediatric dermatology has been rich in new developments. Part II of this continuing medical education article will focus on new therapeutic modalities for several entities encountered in pediatric dermatology. The treatment of atopic dermatitis, exciting advances in the use of propranolol and other beta-blockers for the use of infantile hemangiomas, the use of rapamycin for vascular anomalies, the use of biologics in children, the central nervous system risks of general anesthesia in young children, side effects in the use of isotretinoin, the treatment of tinea capitis, treatment of herpes simplex infections, and the use of technologies such as texting and social media in medicine will be discussed. Copyright © 2013 American Academy of Dermatology, Inc. Published by Mosby, Inc. All rights reserved.

  6. Choice and validation of a near infrared spectroscopic application for the identity control of starting materials. practical experience with the EU draft Note for Guidance on the use of near infrared spectroscopy by the pharmaceutical industry and the data to be forwarded in part II of the dossier for a marketing authorization.

    PubMed

    Vredenbregt, M J; Caspers, P W J; Hoogerbrugge, R; Barends, D M

    2003-11-01

    Recently the CPMP/CVMP sent out for consultation the draft Note for Guidance (dNfG) on the use of near infrared spectroscopy (NIRS) by the pharmaceutical industry and the data to be forwarded in part II of the dossier for a marketing authorization. We explored the practicability of this dNfG with respect to the verification of the correct identity of starting materials in a generic tablet-manufacturing site. Within the boundaries of the dNfG, a release procedure was developed for 12 substances containing structurally related compounds and substances differing only in particle size. For the method development literature data were also taken into consideration. Good results were obtained with wavelength correlation (WC), applied on raw spectra or second derivative spectra both without smoothing. The defined threshold of 0.98 for raw spectra differentiated between all molecular structures. Both methods were found to be robust over a period of 1 year. For the differentiation between the different particle sizes a subsequent second chemometric technique had to be used. Soft independent modelling of class analogy (SIMCA) with a probability level of 0.01 proved suitable. Internal and external validation I according to the dNfG showed no incorrect rejections or false acceptances. External validation II according to the dNfG was carried out with 95 potentially interfering substances from which 46 were tested experimentally. Macrogol 400 was not distinguished from macrogol 300. For the complete verification of the identity of macrogol 300 test A of the European Pharmacopoeia is needed in addition to the NIRS application. A release procedure developed with WC applied on raw spectra and SIMCA as a second method, which is different from the preferred method of the dNfG, was tested in practice with good results. We conclude that the dNfG has good practicability and that deviations from the preferred methods of the dNfG can also give good differentiation.

  7. Plastic Technology (Production). Industrial Arts, Senior High--Level II. North Dakota Senior High Industrial Arts Curriculum Guides.

    ERIC Educational Resources Information Center

    Claus, Robert; And Others

    This course guide for a plastic technology course is one of four developed for the production area in the North Dakota senior high industrial arts education program. (Eight other guides are available for two other areas of Industrial Arts--energy/power and graphic communications.) Part 1 provides such introductory information as a definition and…

  8. Energy Sources (Energy/Power). Industrial Arts, Senior High--Level II. North Dakota Senior High Industrial Arts Curriculum Guides.

    ERIC Educational Resources Information Center

    Lawrence, Allen; And Others

    This course guide for an energy sources course is one of four developed for the energy/power area in the North Dakota senior high industrial arts education program. (Eight other guides are available for two other areas of Industrial Arts--graphic communications and production.) Part 1 provides such introductory information as a definition and…

  9. Design/Drafting (Graphic Communications). Industrial Arts, Senior High--Level II. North Dakota Senior High Industrial Arts Curriculum Guides.

    ERIC Educational Resources Information Center

    Poehls, Eddie; And Others

    This course guide for a design/drafting course is one of four developed for the graphic communications area in the North Dakota senior high industrial arts education program. (Eight other guides are available for two other areas of Industrial Arts--energy/power and production.) Part 1 provides such introductory information as a definition and…

  10. Transportation (Energy/Power). Industrial Arts, Senior High--Level II. North Dakota Senior High Industrial Arts Curriculum Guides.

    ERIC Educational Resources Information Center

    Lawrence, Allen; And Others

    This course guide for a transportation course is one of four developed for the energy/power area in the North Dakota senior high industrial arts education program. (Eight other guides are available for two other areas of Industrial Arts--graphic communications and production.) Part 1 provides such introductory information as a definition and…

  11. Photography (Graphic Communications). Industrial Arts, Senior High--Level II. North Dakota Senior High Industrial Arts Curriculum Guides.

    ERIC Educational Resources Information Center

    Poehls, Eddie; And Others

    This course guide for a photography course is one of four developed for the graphic communications area in the North Dakota senior high industrial arts education program. (Eight other guides are available for two other areas of Industrial Arts--energy/power and production.) Part 1 provides such introductory information as a definition and…

  12. Transportation (Energy/Power). Industrial Arts, Senior High--Level II. North Dakota Senior High Industrial Arts Curriculum Guides.

    ERIC Educational Resources Information Center

    Lawrence, Allen; And Others

    This course guide for a transportation course is one of four developed for the energy/power area in the North Dakota senior high industrial arts education program. (Eight other guides are available for two other areas of Industrial Arts--graphic communications and production.) Part 1 provides such introductory information as a definition and…

  13. Plastic Technology (Production). Industrial Arts, Senior High--Level II. North Dakota Senior High Industrial Arts Curriculum Guides.

    ERIC Educational Resources Information Center

    Claus, Robert; And Others

    This course guide for a plastic technology course is one of four developed for the production area in the North Dakota senior high industrial arts education program. (Eight other guides are available for two other areas of Industrial Arts--energy/power and graphic communications.) Part 1 provides such introductory information as a definition and…

  14. Energy Sources (Energy/Power). Industrial Arts, Senior High--Level II. North Dakota Senior High Industrial Arts Curriculum Guides.

    ERIC Educational Resources Information Center

    Lawrence, Allen; And Others

    This course guide for an energy sources course is one of four developed for the energy/power area in the North Dakota senior high industrial arts education program. (Eight other guides are available for two other areas of Industrial Arts--graphic communications and production.) Part 1 provides such introductory information as a definition and…

  15. Power Technology (Energy/Power). Industrial Arts, Senior High--Level II. North Dakota Senior High Industrial Arts Curriculum Guides.

    ERIC Educational Resources Information Center

    Lawrence, Allen; And Others

    This course guide for a power technology course is one of four developed for the energy/power area in the North Dakota senior high industrial arts education program. (Eight other guides are available for two other areas of Industrial Arts--graphic communications and production.) Part 1 provides such introductory information as a definition and…

  16. A US perspective on fast reactor fuel fabrication technology and experience. Part II: Ceramic fuels

    NASA Astrophysics Data System (ADS)

    Burkes, Douglas E.; Fielding, Randall S.; Porter, Douglas L.; Meyer, Mitchell K.; Makenas, Bruce J.

    2009-08-01

    This paper is Part II of a review focusing on the United States experience with oxide, carbide, and nitride fast reactor fuel fabrication. Over 60 years of research in fuel fabrication by government, national laboratories, industry, and academia has culminated in a foundation of research and resulted in significant improvements to the technologies employed to fabricate these fuel types. This part of the review documents the current state of fuel fabrication technologies in the United States for each of these fuel types, some of the challenges faced by previous researchers, and how these were overcome. Knowledge gained from reviewing previous investigations will aid both researchers and policy makers in forming future decisions relating to nuclear fuel fabrication technologies.

  17. Primer of statistics in dental research: Part II.

    PubMed

    Shintani, Ayumi

    2014-04-01

    The Part I of Primer of Statistics in Dental Research covered five topics that are often mentioned in statistical check list of many peer-review journals including (1) statistical graph, (2) how to deal with outliers, (3) p-value and confidence interval, (4) testing equivalence, and (5) multiplicity Adjustment. The Part II of the series covers another set of important topics in dental statistics including (1) selecting the proper statistical tests, (2) repeated measures analysis, (3) epidemiological consideration for causal association, and (4) analysis of agreement. First, a guide in selecting the proper statistical tests based on the research question will be laid out in text and with a table so that researchers choose the univariable statistical test by answering five simple questions. Second, the importance of utilizing repeated measures analysis will be illustrated. This is a key component of data analysis as in many dental studies, observations are considered repeated in a single patient (several teeth are measured in a single patient). Third, concepts of confounding and the use of regression analysis are explained by going over a famous observational cohort study. Lastly, the use of proper agreement analysis vs. correlation for study of agreement will be discussed to avoid a common pitfall in dental research.

  18. Digital Assays Part II: Digital Protein and Cell Assays.

    PubMed

    Basu, Amar S

    2017-08-01

    A digital assay is one in which the sample is partitioned into many containers such that each partition contains a discrete number of biological entities (0, 1, 2, 3, . . .). A powerful technique in the biologist's toolkit, digital assays bring a new level of precision in quantifying nucleic acids, measuring proteins and their enzymatic activity, and probing single-cell genotype and phenotype. Where part I of this review focused on the fundamentals of partitioning and digital PCR, part II turns its attention to digital protein and cell assays. Digital enzyme assays measure the kinetics of single proteins with enzymatic activity. Digital enzyme-linked immunoassays (ELISAs) quantify antigenic proteins with 2 to 3 log lower detection limit than conventional ELISA, making them well suited for low-abundance biomarkers. Digital cell assays probe single-cell genotype and phenotype, including gene expression, intracellular and surface proteins, metabolic activity, cytotoxicity, and transcriptomes (scRNA-seq). These methods exploit partitioning to 1) isolate single cells or proteins, 2) detect their activity via enzymatic amplification, and 3) tag them individually by coencapsulating them with molecular barcodes. When scaled, digital assays reveal stochastic differences between proteins or cells within a population, a key to understanding biological heterogeneity. This review is intended to give a broad perspective to scientists interested in adopting digital assays into their workflows.

  19. Violence in the emergency department: an ethnographic study (part II).

    PubMed

    Lau, Jacqui Bee Chuo; Magarey, Judy; Wiechula, Richard

    2012-07-01

    Violence in the emergency department (ED) is a significant and complex problem worldwide. This is a part II of a 2-part series on an ethnographic study. The study which aimed at exploring the cultural aspects of violence was carried out at a major metropolitan ED for 3 months. This paper presents the findings and discussions of the study. One hundred and three violent incident questionnaires were completed. A total of 242.5h of observation and 34 (33%) interviews with nurses were conducted. From the data analysis, three critical cultural themes (i.e. 'problems and solutions', 'requests and demands' and 'them and us') were identified. The study indicated that the cultural meanings of violence were complex and highly subjective. Factors such as environment, conflicting messages regarding waiting time, and the nurse-patient/relative behaviours and the resulting reciprocal relationships were critical. Nurses' efforts to establish rapport with patients was crucial and needed to occur early. There was usually a 'turning point' that provided an opportunity for the nurse to avoid violence. While violence is a complex issue with many paradoxes, the study indicates that effective interpersonal empathetic communication has a significant role in reducing violence in the ED. Copyright © 2011 Elsevier Ltd. All rights reserved.

  20. Reforming Science Education: Part II. Utilizing Kieran Egan's Educational Metatheory

    NASA Astrophysics Data System (ADS)

    Schulz, Roland M.

    2009-04-01

    This paper is the second of two parts and continues the conversation which had called for a shift in the conceptual focus of science education towards philosophy of education, with the requirement to develop a discipline-specific “philosophy” of science education. In Part I, conflicting conceptions of science literacy were identified with disparate “visions” tied to competing research programs as well as school-based curricular paradigms. The impasse in the goals of science education and thereto, the contending views of science literacy, were themselves associated with three underlying fundamental aims of education (knowledge-itself; personal development; socialization) which, it was argued, usually undercut the potential of each other. During periods of “crisis-talk” and throughout science educational history these three aims have repeatedly attempted to assert themselves. The inability of science education research to affect long-term change in classrooms was correlated not only to the failure to reach a consensus on the aims (due to competing programs and to the educational ideologies of their social groups), but especially to the failure of developing true educational theories (largely neglected since Hirst). Such theories, especially metatheories, could serve to reinforce science education’s growing sense of academic autonomy and independence from socio-economic demands. In Part II, I offer as a suggestion Egan’s cultural-linguistic theory as a metatheory to help resolve the impasse. I hope to make reformers familiar with his important ideas in general, and more specifically, to show how they can complement HPS rationales and reinforce the work of those researchers who have emphasized the value of narrative in learning science.

  1. 29 CFR Appendix A to Part 510 - Manufacturing Industries Eligible for Minimum Wage Phase-In

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 29 Labor 3 2013-07-01 2013-07-01 false Manufacturing Industries Eligible for Minimum Wage Phase-In... FAIR LABOR STANDARDS ACT IN PUERTO RICO Pt. 510, App. A Appendix A to Part 510—Manufacturing Industries Eligible for Minimum Wage Phase-In This appendix contains a listing of all manufacturing industries...

  2. 29 CFR Appendix A to Part 510 - Manufacturing Industries Eligible for Minimum Wage Phase-In

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 29 Labor 3 2014-07-01 2014-07-01 false Manufacturing Industries Eligible for Minimum Wage Phase-In... FAIR LABOR STANDARDS ACT IN PUERTO RICO Pt. 510, App. A Appendix A to Part 510—Manufacturing Industries Eligible for Minimum Wage Phase-In This appendix contains a listing of all manufacturing industries...

  3. 29 CFR Appendix A to Part 510 - Manufacturing Industries Eligible for Minimum Wage Phase-In

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 29 Labor 3 2010-07-01 2010-07-01 false Manufacturing Industries Eligible for Minimum Wage Phase-In... FAIR LABOR STANDARDS ACT IN PUERTO RICO Pt. 510, App. A Appendix A to Part 510—Manufacturing Industries Eligible for Minimum Wage Phase-In This appendix contains a listing of all manufacturing industries...

  4. 29 CFR Appendix A to Part 510 - Manufacturing Industries Eligible for Minimum Wage Phase-In

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 29 Labor 3 2011-07-01 2011-07-01 false Manufacturing Industries Eligible for Minimum Wage Phase-In... FAIR LABOR STANDARDS ACT IN PUERTO RICO Pt. 510, App. A Appendix A to Part 510—Manufacturing Industries Eligible for Minimum Wage Phase-In This appendix contains a listing of all manufacturing industries...

  5. 29 CFR Appendix A to Part 510 - Manufacturing Industries Eligible for Minimum Wage Phase-In

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 29 Labor 3 2012-07-01 2012-07-01 false Manufacturing Industries Eligible for Minimum Wage Phase-In... FAIR LABOR STANDARDS ACT IN PUERTO RICO Pt. 510, App. A Appendix A to Part 510—Manufacturing Industries Eligible for Minimum Wage Phase-In This appendix contains a listing of all manufacturing industries...

  6. Space Industrialization: Manufacturing and Construction Activities. Part 2.

    ERIC Educational Resources Information Center

    Story, Charles H.

    1983-01-01

    Discusses how space industrialization will provide direct benefits for our nation and will transfer technology to the many diverse areas of human activity. Examples are the development of the Space Shuttle, the Space Studies Institute, and the LS Society (advocates for colonizing space). (NRJ)

  7. Space Industrialization: Manufacturing and Construction Activities. Part 2.

    ERIC Educational Resources Information Center

    Story, Charles H.

    1983-01-01

    Discusses how space industrialization will provide direct benefits for our nation and will transfer technology to the many diverse areas of human activity. Examples are the development of the Space Shuttle, the Space Studies Institute, and the LS Society (advocates for colonizing space). (NRJ)

  8. Repeated-sprint ability - part II: recommendations for training.

    PubMed

    Bishop, David; Girard, Olivier; Mendez-Villanueva, Alberto

    2011-09-01

    Short-duration sprints, interspersed with brief recoveries, are common during most team sports. The ability to produce the best possible average sprint performance over a series of sprints (≤10 seconds), separated by short (≤60 seconds) recovery periods has been termed repeated-sprint ability (RSA). RSA is therefore an important fitness requirement of team-sport athletes, and it is important to better understand training strategies that can improve this fitness component. Surprisingly, however, there has been little research about the best training methods to improve RSA. In the absence of strong scientific evidence, two principal training theories have emerged. One is based on the concept of training specificity and maintains that the best way to train RSA is to perform repeated sprints. The second proposes that training interventions that target the main factors limiting RSA may be a more effective approach. The aim of this review (Part II) is to critically analyse training strategies to improve both RSA and the underlying factors responsible for fatigue during repeated sprints (see Part I of the preceding companion article). This review has highlighted that there is not one type of training that can be recommended to best improve RSA and all of the factors believed to be responsible for performance decrements during repeated-sprint tasks. This is not surprising, as RSA is a complex fitness component that depends on both metabolic (e.g. oxidative capacity, phosphocreatine recovery and H+ buffering) and neural factors (e.g. muscle activation and recruitment strategies) among others. While different training strategies can be used in order to improve each of these potential limiting factors, and in turn RSA, two key recommendations emerge from this review; it is important to include (i) some training to improve single-sprint performance (e.g. 'traditional' sprint training and strength/power training); and (ii) some high-intensity (80-90% maximal oxygen

  9. 40 CFR Appendix II to Part 1039 - Steady-State Duty Cycles

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... II to Part 1039 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM NEW AND IN-USE NONROAD COMPRESSION-IGNITION ENGINES Pt. 1039, App. II Appendix II to Part 1039—Steady-State Duty Cycles (a) The following duty cycles apply for...

  10. Recovery in soccer : part ii-recovery strategies.

    PubMed

    Nédélec, Mathieu; McCall, Alan; Carling, Chris; Legall, Franck; Berthoin, Serge; Dupont, Gregory

    2013-01-01

    In the formerly published part I of this two-part review, we examined fatigue after soccer matchplay and recovery kinetics of physical performance, and cognitive, subjective and biological markers. To reduce the magnitude of fatigue and to accelerate the time to fully recover after completion, several recovery strategies are now used in professional soccer teams. During congested fixture schedules, recovery strategies are highly required to alleviate post-match fatigue, and then to regain performance faster and reduce the risk of injury. Fatigue following competition is multifactorial and mainly related to dehydration, glycogen depletion, muscle damage and mental fatigue. Recovery strategies should consequently be targeted against the major causes of fatigue. Strategies reviewed in part II of this article were nutritional intake, cold water immersion, sleeping, active recovery, stretching, compression garments, massage and electrical stimulation. Some strategies such as hydration, diet and sleep are effective in their ability to counteract the fatigue mechanisms. Providing milk drinks to players at the end of competition and a meal containing high-glycaemic index carbohydrate and protein within the hour following the match are effective in replenishing substrate stores and optimizing muscle-damage repair. Sleep is an essential part of recovery management. Sleep disturbance after a match is common and can negatively impact on the recovery process. Cold water immersion is effective during acute periods of match congestion in order to regain performance levels faster and repress the acute inflammatory process. Scientific evidence for other strategies reviewed in their ability to accelerate the return to the initial level of performance is still lacking. These include active recovery, stretching, compression garments, massage and electrical stimulation. While this does not mean that these strategies do not aid the recovery process, the protocols implemented up until

  11. 40 CFR Appendix II to Part 600 - Sample Fuel Economy Calculations

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 30 2014-07-01 2014-07-01 false Sample Fuel Economy Calculations II Appendix II to Part 600 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) ENERGY POLICY FUEL ECONOMY AND GREENHOUSE GAS EXHAUST EMISSIONS OF MOTOR VEHICLES Pt. 600, App. II Appendix II...

  12. 40 CFR Appendix II to Part 600 - Sample Fuel Economy Calculations

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 31 2012-07-01 2012-07-01 false Sample Fuel Economy Calculations II Appendix II to Part 600 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) ENERGY POLICY FUEL ECONOMY AND GREENHOUSE GAS EXHAUST EMISSIONS OF MOTOR VEHICLES Pt. 600, App. II Appendix II...

  13. Part II--Management of pediatric post-traumatic headaches.

    PubMed

    Pinchefsky, Elana; Dubrovsky, Alexander Sasha; Friedman, Debbie; Shevell, Michael

    2015-03-01

    Post-traumatic headache is one of the most common symptoms occurring after mild traumatic brain injury in children. This is an expert opinion-based two-part review on pediatric post-traumatic headaches. In part II, we focus on the medical management of post-traumatic headaches. There are no randomized controlled trials evaluating the efficacy of therapies specifically for pediatric post-traumatic headaches. Thus, the algorithm we propose has been extrapolated from the primary headache literature and small noncontrolled trials of post-traumatic headache. Most post-traumatic headaches are migraine or tension type, and standard medications for these headache types are used. A multifaceted approach is needed to address all the possible causes of headache and any comorbid conditions that may delay recovery or alter treatment choices. For acute treatment, nonsteroidal anti-inflammatories can be used. If the headaches have migrainous features and nonsteroidal anti-inflammatories are not effective, triptans may be beneficial. Opioids are not indicated. Medication overuse should be avoided. For preventive treatments, some reports indicate that amitriptyline, gabapentin, or topiramate may be beneficial. Amitriptyline is a good choice because it can be used to treat both migraine and tension-type headaches. Nerve blocks, nutraceuticals (e.g. melatonin), and behavioral therapies may also be useful, and lifestyle factors, especially adequate sleep hygiene and strategies to cope with anxiety, should be emphasized. Improved treatment of acute post-traumatic headache may reduce the likelihood of developing chronic headaches, which can be especially problematic to effectively manage and can be functionally debilitating. Copyright © 2015 Elsevier Inc. All rights reserved.

  14. Thinking in nursing education. Part II. A teacher's experience.

    PubMed

    Ironside, P M

    1999-01-01

    Across academia, educators are investigating teaching strategies that facilitate students' abilities to think critically. Because may these strategies require low teacher-student ratios or sustained involvement over time, efforts to implement them are often constrained by diminishing resources for education, faculty reductions, and increasing number of part-time teachers and students. In nursing, the challenges of teaching and learning critical thinking are compounded by the demands of providing care to patients with increasingly acute and complex problems in a wide variety of settings. To meet these challenges, nurse teachers have commonly used a variety of strategies to teach critical thinking (1). For instance, they often provide students with case studies or simulated clinical situations in classroom and laboratory settings (2). At other times, students are taught a process of critical thinking and given structured clinical assignments, such as care plans or care maps, where they apply this process in anticipating the care a particular patient will require. Accompanying students onto clinical units, teachers typically evaluate critical thinking ability by reviewing a student's preparation prior to the experience and discussing it with the student during the course of the experience. The rationales students provide for particular nursing interventions are taken as evidence of their critical thinking ability. While this approach is commonly thought to be effective, the evolving health care system has placed increased emphasis on community nursing (3,4), where it is often difficult to prespecify learning experiences or to anticipate patient care needs. In addition, teachers are often not able to accompany each student to the clinical site. Thus, the traditional strategies for teaching and learning critical thinking common to hospital-based clinical courses are being challenged, transformed, and extended (5). Part II of this article describes findings that suggest

  15. Part 3: Pharmacogenetic Variability in Phase II Anticancer Drug Metabolism

    PubMed Central

    Deenen, Maarten J.; Cats, Annemieke; Beijnen, Jos H.

    2011-01-01

    Equivalent drug doses may lead to wide interpatient variability in drug response to anticancer therapy. Known determinants that may affect the pharmacological response to a drug are, among others, nongenetic factors, including age, gender, use of comedication, and liver and renal function. Nonetheless, these covariates do not explain all the observed interpatient variability. Differences in genetic constitution among patients have been identified to be important factors that contribute to differences in drug response. Because genetic polymorphism may affect the expression and activity of proteins encoded, it is a key covariate that is responsible for variability in drug metabolism, drug transport, and pharmacodynamic drug effects. We present a series of four reviews about pharmacogenetic variability. This third part in the series of reviews is focused on genetic variability in phase II drug-metabolizing enzymes (glutathione S-transferases, uridine diphosphoglucuronosyl transferases, methyltransferases, sulfotransferases, and N-acetyltransferases) and discusses the effects of genetic polymorphism within the genes encoding these enzymes on anticancer drug therapy outcome. Based on the literature reviewed, opportunities for patient-tailored anticancer therapy are proposed. PMID:21659608

  16. Stem cells in dentistry--Part II: Clinical applications.

    PubMed

    Egusa, Hiroshi; Sonoyama, Wataru; Nishimura, Masahiro; Atsuta, Ikiru; Akiyama, Kentaro

    2012-10-01

    New technologies that facilitate solid alveolar ridge augmentation are receiving considerable attention in the field of prosthodontics because of the growing requirement for esthetic and functional reconstruction by dental implant treatments. Recently, several studies have demonstrated potential advantages for stem-cell-based therapies in regenerative treatments. Mesenchymal stem/stromal cells (MSCs) are now an excellent candidate for tissue replacement therapies, and tissue engineering approaches and chair-side cellular grafting approaches using autologous MSCs represent the clinical state of the art for stem-cell-based alveolar bone regeneration. Basic studies have revealed that crosstalk between implanted donor cells and recipient immune cells plays a key role in determining clinical success that may involve the recently observed immunomodulatory properties of MSCs. Part II of this review first overviews progress in regenerative dentistry to consider the implications of the stem cell technology in dentistry and then highlights cutting-edge stem-cell-based alveolar bone regenerative therapies. Factors that affect stem-cell-based bone regeneration as related to the local immune response are then discussed. Additionally, pre-clinical stem cell studies for the regeneration of teeth and other oral organs as well as possible applications of MSC-based immunotherapy in dentistry are outlined. Finally, the marketing of stem cell technology in dental stem cell banks with a view toward future regenerative therapies is introduced. Copyright © 2012 Japan Prosthodontic Society. Published by Elsevier Ltd. All rights reserved.

  17. Was Part D a giveaway to the pharmaceutical industry?

    PubMed

    Newhouse, Joseph P; Seiguer, Erica; Frank, Richard G

    2007-01-01

    The Medicare Modernization Act (MMA) prohibited the government from negotiating drug prices, a feature that the act's critics characterize as a giveaway to the drug industry. Instead of the government negotiating to keep prices down, the act relies on competition among drug companies to obtain business from private insurers; yet, competition cannot be effective when there are no close clinical substitutes. In the past few years, the rate of introduction of first-in-class drugs has been low; if this continues, the prohibition on negotiation may be only a minor problem. However, if the prior rate of introduction resumes, the government may find itself with unacceptable expenditure levels.

  18. Industrial Electronics II for ICT. Instructor's Guide and Curriculum Guide.

    ERIC Educational Resources Information Center

    Snider, Bob; Notgrass, Troy

    This manual is designed to help instructors guide students through their manuals and laboratory training stations in the field of industrial electronics. The manual consists of the following nine sections: (1) suggestions for teaching the course; (2) an instructional delivery outline; (3) lists of essential elements common to all trade and…

  19. Industrial Electronics II for ICT. Instructor's Guide and Curriculum Guide.

    ERIC Educational Resources Information Center

    Snider, Bob; Notgrass, Troy

    This manual is designed to help instructors guide students through their manuals and laboratory training stations in the field of industrial electronics. The manual consists of the following nine sections: (1) suggestions for teaching the course; (2) an instructional delivery outline; (3) lists of essential elements common to all trade and…

  20. Industrial Cooperative Training II. Curriculum Guide. General Related Study Units.

    ERIC Educational Resources Information Center

    Virginia Polytechnic Inst. and State Univ., Blacksburg. Div. of Vocational-Technical Education.

    Basic guidelines are offered for the teacher or coordinator who is working with second year Industrial Cooperative Training students (generally students at the twelfth grade level). The contents are organized into 12 units, with each unit including two to five lesson plans, transparencies (coded "T"), handouts (coded "H"), and a bibliography…

  1. A Review of Industrial Relations Research, Volume II.

    ERIC Educational Resources Information Center

    Somers, Gerald G., Ed.

    This report, with Volume I previously released, appraises selected research in industrial relations since 1956-57. Experts analyze the character and contributions of the research output in their areas of expertise. Contents include: (1) "Public Policy and Labor-Management Relations" by Benjamin Aaron and Paul Seth Meyer, (2) "Manpower Research and…

  2. Real World of Industrial Chemistry. The Second 50 Industrial Chemicals, Part 2.

    ERIC Educational Resources Information Center

    Chenier, Philip J.; Artibee, Danette S.

    1988-01-01

    Completes a report from a previous article by presenting the important manufacture and uses of industrial chemicals. Gives structural formulas and percentages of each major use as well as the typical method of manufacture. (CW)

  3. Industrial Relations and Training--Part 1: On Beginning to Change the Industrial Relations Climate

    ERIC Educational Resources Information Center

    Barber, John

    1973-01-01

    Authoritarian management from above can no longer impose controls on subordinates. Participative management is now essential to improve organizational efficiency, release individual and group initiative, and make a fundamental improvement in the climate of British industrial relations. (MS)

  4. IPCC Working Group II: Impacts and Adaptation Part I

    NASA Astrophysics Data System (ADS)

    Pulwarty, R. S.

    2007-12-01

    The IPCC (as opposed to the UN Framework Convention) defines climate change as" any change in climate over time, whether due to natural variability or as a result of human activity". The IPCC Working Group II (Impacts, Adaptation, Vulnerability) was charged with assessing the scientific, technical, environmental, economic, and social aspects of vulnerability to climate change, and, the negative and positive consequences for ecological systems, socio-economic sectors, and human health. The Working Group II report focused on the following issues for different sectors and regions (e.g. water, agriculture, biodiversity) and communities (coastal, island, etc.): · The role of adaptation in reducing vulnerability and impacts, · Assessment of adaptation capacity, options and constraints, and · Enhancing adaptation practice and operations. This presentation will address the following questions in the context of the results of the IPCC Fourth Assessment Report WG II: · What are the barriers, knowledge gaps, and opportunities for impacts assessments? · How are decisions about adaptation being made, and what types of adaptation strategies are being undertaken? · What are good adaptation practices and how are they learned over time? Examples will be drawn from the freshwater resources, small islands and adaptation chapters to which the presenter contributed. Many lessons have been identified but few have been implemented or evaluated over time. Adaptation occurs in the context of multiple stresses. Adaptation will be important in coping with early impacts in the near-term and continue to be important as our climate changes, regardless of how that change is derived. It is important to note that unmitigated climate change could, in the long term, exceed the capacity of different natural, managed and human systems to adapt. The assessment leads to the following conclusions: · Adaptation to climate change is already taking place, but on a limited basis · Adaptation measures

  5. Autism and EMF? Plausibility of a pathophysiological link part II.

    PubMed

    Herbert, Martha R; Sage, Cindy

    2013-06-01

    Autism spectrum conditions (ASCs) are defined behaviorally, but they also involve multileveled disturbances of underlying biology that find striking parallels in the physiological impacts of electromagnetic frequency and radiofrequency radiation exposures (EMF/RFR). Part I (Vol 776) of this paper reviewed the critical contributions pathophysiology may make to the etiology, pathogenesis and ongoing generation of behaviors currently defined as being core features of ASCs. We reviewed pathophysiological damage to core cellular processes that are associated both with ASCs and with biological effects of EMF/RFR exposures that contribute to chronically disrupted homeostasis. Many studies of people with ASCs have identified oxidative stress and evidence of free radical damage, cellular stress proteins, and deficiencies of antioxidants such as glutathione. Elevated intracellular calcium in ASCs may be due to genetics or may be downstream of inflammation or environmental exposures. Cell membrane lipids may be peroxidized, mitochondria may be dysfunctional, and various kinds of immune system disturbances are common. Brain oxidative stress and inflammation as well as measures consistent with blood-brain barrier and brain perfusion compromise have been documented. Part II of this paper documents how behaviors in ASCs may emerge from alterations of electrophysiological oscillatory synchronization, how EMF/RFR could contribute to these by de-tuning the organism, and policy implications of these vulnerabilities. It details evidence for mitochondrial dysfunction, immune system dysregulation, neuroinflammation and brain blood flow alterations, altered electrophysiology, disruption of electromagnetic signaling, synchrony, and sensory processing, de-tuning of the brain and organism, with autistic behaviors as emergent properties emanating from this pathophysiology. Changes in brain and autonomic nervous system electrophysiological function and sensory processing predominate, seizures

  6. Municipal and Industrial Needs (MAIN II). St. Paul District Revision.

    DTIC Science & Technology

    1984-01-01

    11isconsin. It is an invaluable tool for assessing the need for water supply and treatment facilities, and is a first step in evaluating the effect of...supply demand for the city of Eau Claire, Wisconsin. This model is an invaluable tool in assessing the need for water supply and treatment facilities. It...APPAREL INDUSTRY 339 PRIME METAL INOUSTRIES 242 SAW-PLANING MILLS 341 METAL CANS 243 MILLWORK 342 CUTLERY, HARDWARE 244 WOOD CONTAINERS 343 PLUMBING

  7. Discovery of Quantum structure and A Theory of Everything Part I and Part II

    NASA Astrophysics Data System (ADS)

    Zhang, Meggie

    2012-10-01

    (Part I) During my research I discovered logical errors in the logic of science and in mathematics. These errors caused scientists missed out important information when interpreting data. This led me to revisit the method of science and the existing results and able to find new information, which lead to the discovery of photon's structure. A ``particle collision illumination'' experiment then provided direct evidence supported the structure. Analysis of the properties of the structure suggested an organized but not-continuous multi-dimension (n-D) space within. Therefore I formed a hypothesis of a not-continuous n-D space structure. In search for evidence, I turned into crystal technology, and found direct evidence supported the hypotesis, then further particle collision found more evidence support this finding. (Part II) Analysis of single electron buildup revealed star and galaxy formation is from a single particle following a predictable pattern. This pattern is also common in matter formation. Analysis of the quantum structure suggested the formation of a larger structure through the space expansion within the structure. Further experiment results support the finding and result revealed the expansion is through space folding. Result also suggested a violation of energy conservation law that energy is created during the formation of matter, and matter itself is moving from a lower energy state to a higher energy state. When putting all information together, I arrived to a theory of everything which gives explanations to all existing phenomenon in the universe including black hole, dark energy, star formation, consciousness.

  8. NMG documentation. Part II. Programmer`s guide

    SciTech Connect

    Fritsch, F.N.; Dickinson, R.P. Jr.

    1996-07-01

    This is the 2nd of a 3-part report documenting NMG, the Numerical Mathematics Guide. This part is aimed at the programmer and contains Chapter 2, how it works. (Part I is aimed at the user of the system; Part III is aimed at the maintainer of NMG and will receive only limited distribution.)

  9. The year's new drugs & biologics, 2013: Part II.

    PubMed

    Graul, A I; Navarro, D; Dulsat, C; Cruces, E; Tracy, M

    2014-02-01

    The demise of the pharmaceutical industry, so pessimistically predicted by many in recent years, has not come to pass and in fact the patient is alive and well. New programs enacted by drug regulators have been enthusiastically taken up by the industry, including the FDA's breakthrough therapy and qualified infectious disease product (QIDP) designations, as well as the now-consolidated orphan drug programs in many countries. Pharma companies pragmatically wean nonperformers from the pipeline in an efficient manner, resulting in somewhat leaner but higher-quality pipelines. Mergers and acquisitions also continue to drive consolidation and efficiency in the industry, a trend that continued during 2013. This article provides an updated review of these and other trends in the pharmaceutical industry in the year just passed.

  10. Strontium: Part II. Chemistry, Biological Aspects and Applications.

    ERIC Educational Resources Information Center

    Britton, G. C.; Johnson, C. H.

    1987-01-01

    Reviews basic information on the Chemistry of strontium and its compounds. Explains biological aspects of strontium and its pharmaceutical applications. Highlights industrial application of strontium and its components. (ML)

  11. 40 CFR Appendix II to Part 600 - Sample Fuel Economy Calculations

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 29 2010-07-01 2010-07-01 false Sample Fuel Economy Calculations II... FUEL ECONOMY AND CARBON-RELATED EXHAUST EMISSIONS OF MOTOR VEHICLES Pt. 600, App. II Appendix II to Part 600—Sample Fuel Economy Calculations (a) This sample fuel economy calculation is applicable...

  12. 40 CFR Appendix II to Part 1068 - Emission-Related Parameters and Specifications

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 32 2010-07-01 2010-07-01 false Emission-Related Parameters and Specifications II Appendix II to Part 1068 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR POLLUTION CONTROLS GENERAL COMPLIANCE PROVISIONS FOR ENGINE PROGRAMS Pt. 1068, App. II Appendix...

  13. 40 CFR Appendix II to Part 600 - Sample Fuel Economy Calculations

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 31 2013-07-01 2013-07-01 false Sample Fuel Economy Calculations II... FUEL ECONOMY AND GREENHOUSE GAS EXHAUST EMISSIONS OF MOTOR VEHICLES Pt. 600, App. II Appendix II to Part 600—Sample Fuel Economy Calculations (a) This sample fuel economy calculation is applicable...

  14. 40 CFR Appendix II to Part 600 - Sample Fuel Economy Calculations

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 30 2011-07-01 2011-07-01 false Sample Fuel Economy Calculations II... FUEL ECONOMY AND CARBON-RELATED EXHAUST EMISSIONS OF MOTOR VEHICLES Pt. 600, App. II Appendix II to Part 600—Sample Fuel Economy Calculations (a) This sample fuel economy calculation is applicable...

  15. Topics in Chemical Instrumentation, Cl. Thermoluminescence: Part II. Instrumentation.

    ERIC Educational Resources Information Center

    Manche, Emanuel P.

    1979-01-01

    Presents part two on the use of the detection of thermoluminescence as an analytical tool for the chemistry laboratory and allied science. This part discusses instrumentation used and investigates recent developments in instrumentation for thermoluminescence. (HM)

  16. Topics in Chemical Instrumentation, Cl. Thermoluminescence: Part II. Instrumentation.

    ERIC Educational Resources Information Center

    Manche, Emanuel P.

    1979-01-01

    Presents part two on the use of the detection of thermoluminescence as an analytical tool for the chemistry laboratory and allied science. This part discusses instrumentation used and investigates recent developments in instrumentation for thermoluminescence. (HM)

  17. Coping With the Problems of a Technological Age, Part II.

    ERIC Educational Resources Information Center

    New York State Education Dept., Albany. Bureau of Secondary Curriculum Development.

    This is another report in a series of programs dealing with the problems of a technological age. It is assumed that teachers will use both parts of this report. Part I deals with the problems of technology and how it affects our lives. It also discusses the energy crisis created, in part, by technology and deals specifically with coal and…

  18. Sporting Goods. Part I: Hunting and Fishing Equipment and Part II: Athletic, Marine, and Camping Equipment. A Distributive Education Manual.

    ERIC Educational Resources Information Center

    Day, Bill D., Comp.

    These manuals were prepared to introduce students to the fundamentals of hunting and fishing (Part I) and sports requiring athletic, marine and camping equipment (Part II). The sports salesman is in the position of offering a service to the customer, and he can best do so by understanding the sports and the variety of products which may be sold to…

  19. Study of the Utah uranium milling industry. Volume II. Utah energy resources: uranium

    SciTech Connect

    Turley, R.E.

    1981-01-01

    Volume II provides an overview of Utah's uranium industry including its history and present status. Uranium production peaked in 1958, then declined until 1976. A second production boom has begun and ore production could reach more than 1.3 million tons by 1985. Utah's milling industry has the capacity to produce 1600 tons of yellow cake per year. Uranium ores are mined by both conventional surface and underground techniques. (DMC)

  20. 10 CFR Appendix II to Part 1050 - DOE Form 3735.3-Foreign Travel Statement

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 4 2013-01-01 2013-01-01 false DOE Form 3735.3-Foreign Travel Statement II Appendix II to.... II Appendix II to Part 1050—DOE Form 3735.3—Foreign Travel Statement EC01OC91.041 Statement Concerning Acceptance of Travel or Travel Expenses From a Foreign Government Item 1.This statement is to...

  1. 10 CFR Appendix II to Part 1050 - DOE Form 3735.3-Foreign Travel Statement

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 4 2012-01-01 2012-01-01 false DOE Form 3735.3-Foreign Travel Statement II Appendix II to.... II Appendix II to Part 1050—DOE Form 3735.3—Foreign Travel Statement EC01OC91.041 Statement Concerning Acceptance of Travel or Travel Expenses From a Foreign Government Item 1.This statement is to...

  2. 10 CFR Appendix II to Part 1050 - DOE Form 3735.3-Foreign Travel Statement

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 4 2011-01-01 2011-01-01 false DOE Form 3735.3-Foreign Travel Statement II Appendix II to.... II Appendix II to Part 1050—DOE Form 3735.3—Foreign Travel Statement EC01OC91.041 Statement Concerning Acceptance of Travel or Travel Expenses From a Foreign Government Item 1.This statement is to be...

  3. 10 CFR Appendix II to Part 1050 - DOE Form 3735.3-Foreign Travel Statement

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 4 2014-01-01 2014-01-01 false DOE Form 3735.3-Foreign Travel Statement II Appendix II to.... II Appendix II to Part 1050—DOE Form 3735.3—Foreign Travel Statement EC01OC91.041 Statement Concerning Acceptance of Travel or Travel Expenses From a Foreign Government Item 1. This statement is to...

  4. 10 CFR Appendix II to Part 1050 - DOE Form 3735.3-Foreign Travel Statement

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false DOE Form 3735.3-Foreign Travel Statement II Appendix II to.... II Appendix II to Part 1050—DOE Form 3735.3—Foreign Travel Statement EC01OC91.041 Statement Concerning Acceptance of Travel or Travel Expenses From a Foreign Government Item 1.This statement is to...

  5. The Value of Upward Evaluation in Libraries--Part II.

    ERIC Educational Resources Information Center

    Perkins, Gay Helen

    1995-01-01

    Examines the value of upward evaluation by reviewing historical outcomes of upward evaluations in industrial psychology/business literature and library literature. Also discusses the utilization of upward evaluation in libraries and focuses on results of the Western Kentucky University Libraries' annual process of supervisor evaluation. Appendixes…

  6. Emerging trends in salmonid RAS - Part II. System enhancements

    USDA-ARS?s Scientific Manuscript database

    Dozens of land-based, closed containment systems are coming on line to produce salmon. New projects are bringing new principles into the salmon industry. Depuration systems maximize the removal of earthy and musty flavors in harvested fish. An emerging trend has been to apply technologies that incre...

  7. A Conversation with William A. Fowler Part II

    NASA Astrophysics Data System (ADS)

    Greenberg, John

    2005-06-01

    Physicist William A.Fowler initiated an experimental program in nuclear astrophysics after World War II. He recalls here the Steady State versus Big Bang controversy and his celebrated collaboration with Fred Hoyle and Geoffrey and Margaret Burbidge on nucleosynthesis in stars. He also comments on the shift away from nuclear physics in universities to large accelerators and national laboratories.

  8. Reforming Science Education: Part II. Utilizing Kieran Egan's Educational Metatheory

    ERIC Educational Resources Information Center

    Schulz, Roland M.

    2009-01-01

    This paper is the second of two parts and continues the conversation which had called for a shift in the conceptual focus of science education towards philosophy of education, with the requirement to develop a discipline-specific "philosophy" of science education. In Part I, conflicting conceptions of science literacy were identified with…

  9. Mathematics for Junior High School, Volume II (Part 1).

    ERIC Educational Resources Information Center

    Anderson, R. D.; And Others

    This is part one of a two-part SMSG mathematics text for junior high school students. Key ideas emphasized are structure of arithmetic from an algebraic viewpoint, the real number system as a progressing development, and metric and non-metric relations in geometry. Chapter topics include number line and coordinates, equations, scientific notation,…

  10. Mathematics for Junior High School, Volume II (Part 2).

    ERIC Educational Resources Information Center

    Anderson, R. D.; And Others

    This is part two of a two-part SMSG mathematics text for junior high school students. Key ideas emphasized are structure of arithmetic from an algebraic viewpoint, the real number system as a progressing development, and metric and non-metric relations in geometry. Chapter topics include real numbers, similar triangles, variation, non-metric…

  11. Asclepius, Caduceus, and Simurgh as medical symbols; part II. Simurgh.

    PubMed

    Nayernouri, Touraj

    2010-05-01

    In part one of this article I reviewed the history of Asclepius and the Caduceus of Hermes as medical symbols and made a tentative suggestion of using the mythical bird Simurgh as an Iranian symbol of medicine. In this, the second part, I shall describe the evolution of the myth of the Simurgh and discuss the medical relevance of this bird in Iranian history.

  12. Team effort: the nuclear medicine decision making process. Part II.

    PubMed

    Tsuchiyama, S

    1991-06-01

    This two part article examines the nuclear medicine purchase of Baptist Memorial Hospital in Memphis, the largest private hospital in the nation. Part I (May 1991) focused on what their needs were. This concluding installment looks at the committee mechanism itself and the reasoning that went behind their decisions.

  13. Classroom Demonstrations of Polymer Principles Part II. Polymer Formation.

    ERIC Educational Resources Information Center

    Rodriguez, F.; And Others

    1987-01-01

    This is part two in a series on classroom demonstrations of polymer principles. Described is how large molecules can be assembled from subunits (the process of polymerization). Examples chosen include both linear and branched or cross-linked molecules. (RH)

  14. Internal Auditing in Federal, State, and Local Governments (Part II).

    ERIC Educational Resources Information Center

    Knight, Susan; Wilson, Guy

    1981-01-01

    This second part of an annotated bibliography of reports, books, and journal articles concerned with internal auditing in government contexts reviews the available literature for an understanding of the types of internal audit, methods and practices, and other facets. (FM)

  15. Classroom Demonstrations of Polymer Principles Part II. Polymer Formation.

    ERIC Educational Resources Information Center

    Rodriguez, F.; And Others

    1987-01-01

    This is part two in a series on classroom demonstrations of polymer principles. Described is how large molecules can be assembled from subunits (the process of polymerization). Examples chosen include both linear and branched or cross-linked molecules. (RH)

  16. Designing SoTL Studies--Part II: Practicality

    ERIC Educational Resources Information Center

    Bartsch, Robert A.

    2013-01-01

    This chapter suggests solutions to common practical problems in designing SoTL studies. In addition, the advantages and disadvantages of different types of designs are discussed. [Part I available at EJ1029363.

  17. Predictors of performance on the National Board of Chiropractic Examiners Parts I and II*

    PubMed Central

    McCall, Angela R.; Harvey, Richard D.

    2014-01-01

    Objective The purpose of this study was to examine predictors for success on Parts I and II of the National Board of Chiropractic Examiners (NBCE) written examinations. Methods Two validity studies were conducted to examine the criterion validity of Logan College assessments for Part I and II NBCE scores. Both studies consisted of a longitudinal design to examine the validity of entrance grade point average (GPA), in-program chiropractic course content GPA, and an institutional practice exam on Parts I and II of the NBCE. Results Analyses revealed that Part I GPA and practice exam scores combined accounted for 72% of the variance within Part I NBCE scores. Furthermore, every subtest of the Part I NBCE could be reliably predicted by course performance. In the 2nd study, Part I GPA, Part I NBCE score, and Part II GPA accounted for 75% of the variance within Part II NBCE scores. Conclusions Internal training and educational assessments (eg, course grades and practice exams) proved to be strong determinants of NBCE performance above and beyond initial levels of preparedness, thus validating the impact of the chiropractic curriculum on NBCE test achievement. PMID:24611459

  18. Being prepared: bioterrorism and mass prophylaxis: part II.

    PubMed

    Weant, Kyle A; Bailey, Abby M; Fleishaker, Elise L; Justice, Stephanie B

    2014-01-01

    Although several biological agents have been recognized as presenting a significant threat to public health if used in a bioterrorist attack, those that are of greatest importance are known as the Category A agents: Bacillus anthracis (anthrax); variola major (smallpox); Yersinia pestis (plague); Francisella tularensis (tularemia); ribonucleic acid viruses (hemorrhagic fevers); and Clostridium botulinum (botulism toxin). In the previous issue, Part I of this review focused on the clinical presentation and treatment of anthrax, plague, and tularemia. In this second part of this 2-part review of these agents, the focus is on the clinical presentation and treatment of smallpox, viral hemorrhagic fevers, and botulism toxin. The utilization of mass prophylaxis to limit the morbidity and mortality associated with all these agents is also discussed along with the role emergency care personnel play in its implementation.

  19. Mental Retardation Grants; Part II, Research and Demonstration. Fiscal Year 1968.

    ERIC Educational Resources Information Center

    Department of Health, Education, and Welfare, Washington, DC. Secretary's Committee on Mental Retardation.

    Part II of a two-part publication listing mental retardation grants awarded by the U.S. Department of Health, Education, and Welfare in fiscal year 1968 (July 1, 1967, to June 30, 1968), the text includes grants awarded in the areas of research and demonstration. (Part I covers grants in training and construction.) Grants are arranged according to…

  20. Karst geomorphology: From hydrological functioning to palaeoenvironmental reconstructions. Part II

    NASA Astrophysics Data System (ADS)

    De Waele, Jo; Gutierrez, Francisco; Audra, Philippe

    2015-10-01

    In January 2015, the first part of the special issue on karst, entitled "Karst geomorphology: From hydrological functioning to palaeoenvironmental reconstructions" was published (Geomorphology, Vol. 229). This second part of the special issue comprises seven research papers covering a broad geographical canvas including Japan, Slovenia, France, Spain, Croatia, and Poland-Ukraine. Both issues mainly emanate from the contributions presented in the Karst session of the 8th International Conference of Geomorphology (International Association of Geomorphologists), held in Paris in August 2013, enriched with some invited papers.

  1. Operational strategies for dispatchable combined cycle plants, Part II

    SciTech Connect

    Nolan, J.P.; Landis, F.P.

    1996-11-01

    The Brush Cogeneration Facility is a dual-unit, combined cycle, cogeneration plant, operating in a dual cycling, automatically-dispatchable mode. Part I of this report described the contract, including automatic generation control (AGC) by Public Service Company of Colorado (PSCO), and the operation of Unit One. This part of the report covers the operation of Unit Two. Unit two is still in its operating infancy, but is showing that fuel efficiency and low emissions levels are not incompatible with cycling, load-following service. 1 fig.

  2. Managing risks in professional and clinical performance dilemmas: Part II.

    PubMed

    Schwab, N C; Pohlman, K J

    2000-08-01

    The primary purpose of the second article in this 2-part series is to describe and illustrate the use of an analytical framework that may assist school nurses to approach and resolve the dilemmas they may face in practice. Part I of the article was published in the April issue of this journal. It defined the terms "professional performance issue" and "clinical performance issue" and described a 5-step framework for analyzing practice dilemmas related to clinical and performance issues. In this article, the framework will be applied to a specific case scenario involving unsafe staffing and delegation.

  3. Biomedical research ethics: an Islamic view part II.

    PubMed

    Afifi, Raafat Y

    2007-12-01

    In part I of this article I discussed why Islam rejects secularization and this is not because the ethical principles embedded in Islam's teachings are archaic and out of touch with current realities. In addition, I pointed out the agreement between general broad principles of research ethics and Islamic teachings concerning life; which showed clearly that Islam has addressed the regulation of ethics in research more than 14 centuries ago. In this part, I will address two controversial issues concerning women's rights and age of consent for children as possible research subjects in a Muslim community.

  4. 77 FR 29922 - Guides for the Rebuilt, Reconditioned and Other Used Automobile Parts Industry, Request for Comments

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-05-21

    ... CFR Part 20 Guides for the Rebuilt, Reconditioned and Other Used Automobile Parts Industry, Request... FTC's ``Guides for the Rebuilt, Reconditioned and Other Used Automobile Parts Industry.'' DATES... used parts (e.g., engines and transmissions). The Commission first addressed the used automobile...

  5. The Need for Ocean Literacy in the Classroom: Part II

    ERIC Educational Resources Information Center

    Schoedinger, Sarah; Cava, Francesca; Jewell, Beth

    2006-01-01

    As mentioned in Part I, certain classroom activities can help students learn about the ocean and empower them to make informed decisions about their impacts on the environment. One such activity focuses on harmful algal blooms (HABs). In this article, the authors include background information on HABs and then present two activities. Activity 1 is…

  6. Searching for the Right Way to Begin Class: Part II

    ERIC Educational Resources Information Center

    Lawry, John D.

    2012-01-01

    Part I, "Searching for the Right Way to Begin Class," described the various iterations of beginning class rituals the author used over the years. Those rituals began with a prayer to the Holy Spirit as was required at the Catholic women's college Marymount in Tarrytown, New York, where he first taught out of graduate school in 1965. That…

  7. Topics in Finance: Part II--Financial Analysis

    ERIC Educational Resources Information Center

    Laux, Judy

    2010-01-01

    The second article in a series designed to supplement the introductory financial management course, this essay addresses financial statement analysis, including its impact on stock valuation, disclosure, and managerial behavior. [For "Topics in Finance Part I--Introduction and Stockholder Wealth Maximization," see EJ1060345.

  8. Aesthetic Pursuits: Windows, Frames, Words, Images--Part II

    ERIC Educational Resources Information Center

    Burke, Ken

    2005-01-01

    In Part I of this study (Burke, 2005), the author presented the essentials of Image Presentation Theory--IPT--and its application to the analytical explication of various spatial designs in and psychological responses to images, from the illusions of depth in what is referred to as "windows" in cinema theory to the more patterned abstractions of…

  9. DIY Soundcard Based Temperature Logging System. Part II: Applications

    ERIC Educational Resources Information Center

    Nunn, John

    2016-01-01

    This paper demonstrates some simple applications of how temperature logging systems may be used to monitor simple heat experiments, and how the data obtained can be analysed to get some additional insight into the physical processes. [For "DIY Soundcard Based Temperature Logging System. Part I: Design," see EJ1114124.

  10. Laboratory Animal Housing--Parts I and II.

    ERIC Educational Resources Information Center

    Runkle, Robert S.

    1963-01-01

    In recent years, the use of laboratory animals for bio-medical research has shown marked increase. Economic and efficient housing is a necessity. This two part report established guidelines for design and selection of materials for conventional animal housing. Contents include--(1) production and breeding facilities, (2) quarantine facilities, (3)…

  11. Report cards: Part II--Providers rating MCOs.

    PubMed

    Kaplan, J G

    1998-01-01

    Report cards on health plans and on physicians are becoming an increasingly important way of comparing health care quality from the perspective of consumers and the government. In the conclusion of a two-part article, the author suggests another side of the coin: physicians' own rating of health plans to guide their choices in health plan contracting.

  12. Surface anatomy and surface landmarks for thoracic surgery: Part II.

    PubMed

    Smith, Shona E; Darling, Gail E

    2011-05-01

    Surface anatomy is an integral part of a thoracic surgeon's armamentarium to assist with the diagnosis, staging, and treatment of thoracic pathology. As reviewed in this article, the surface landmarks of the lungs, heart, great vessels, and mediastinum are critical for appropriate patient care and should be learned in conjunction with classic anatomy. Copyright © 2011 Elsevier Inc. All rights reserved.

  13. Developing a Positive Self-Concept. Part II.

    ERIC Educational Resources Information Center

    Cibrowski, Lee; Slater, Shirley

    This publication supplements an earlier publication, "What Do You Like about Yourself? Developing a Positive Self-Concept" that presented an introduction to self-concept and included activities that could be used with students of all ages. This particular document, divided into two parts, includes additional ideas and activities that relate to…

  14. The Need for Ocean Literacy in the Classroom: Part II

    ERIC Educational Resources Information Center

    Schoedinger, Sarah; Cava, Francesca; Jewell, Beth

    2006-01-01

    As mentioned in Part I, certain classroom activities can help students learn about the ocean and empower them to make informed decisions about their impacts on the environment. One such activity focuses on harmful algal blooms (HABs). In this article, the authors include background information on HABs and then present two activities. Activity 1 is…

  15. Searching for the Right Way to Begin Class: Part II

    ERIC Educational Resources Information Center

    Lawry, John D.

    2012-01-01

    Part I, "Searching for the Right Way to Begin Class," described the various iterations of beginning class rituals the author used over the years. Those rituals began with a prayer to the Holy Spirit as was required at the Catholic women's college Marymount in Tarrytown, New York, where he first taught out of graduate school in 1965. That…

  16. Brief Internet and NREN Glossary: Part II (M-Z).

    ERIC Educational Resources Information Center

    Machovec, George S.

    1993-01-01

    Presents the second and final part of a selected glossary of terms commonly used in discussions relating to the Internet and the National Research and Education Network (NREN). Highlights include various network names; organizations; acronyms; user interfaces; network research testbeds; various protocols; remote login; and Wide Area Information…

  17. Solar Energy Education. Reader, Part II. Sun story. [Includes glossary

    SciTech Connect

    Not Available

    1981-05-01

    Magazine articles which focus on the subject of solar energy are presented. The booklet prepared is the second of a four part series of the Solar Energy Reader. Excerpts from the magazines include the history of solar energy, mythology and tales, and selected poetry on the sun. A glossary of energy related terms is included. (BCS)

  18. CONTEMPORARY ARABIC READERS--II. ARABIC ESSAYS, PART 1. TEXTS.

    ERIC Educational Resources Information Center

    MCCARUS, ERNEST N.; AND OTHERS

    INTENDED FOR INTERMEDIATE-LEVEL STUDENTS, "PART 1" OF THIS SECOND VOLUME IN THE "CONTEMPORARY ARABIC READERS" SERIES PRESENTS A COLLECTION OF 20 ESSAYS WRITTEN BY OUTSTANDING ARAB LITERARY FIGURES. SUBJECTS RANGE FROM POLITICAL AND RELIGIOUS PHILOSOPHY IN THE ARAB WORLD TO ECONOMIC DEVELOPMENT AND REFORMS IN AGRICULTURE AND THE WRITING SYSTEM. THE…

  19. CONTEMPORARY ARABIC READERS--II. ARABIC ESSAYS, PART 1. TEXTS.

    ERIC Educational Resources Information Center

    MCCARUS, ERNEST N.; AND OTHERS

    INTENDED FOR INTERMEDIATE-LEVEL STUDENTS, "PART 1" OF THIS SECOND VOLUME IN THE "CONTEMPORARY ARABIC READERS" SERIES PRESENTS A COLLECTION OF 20 ESSAYS WRITTEN BY OUTSTANDING ARAB LITERARY FIGURES. SUBJECTS RANGE FROM POLITICAL AND RELIGIOUS PHILOSOPHY IN THE ARAB WORLD TO ECONOMIC DEVELOPMENT AND REFORMS IN AGRICULTURE AND THE WRITING SYSTEM. THE…

  20. Finding Out about Archaeology: Parts I and II.

    ERIC Educational Resources Information Center

    Archaeological Inst. of America, Boston, MA.

    This packet of materials presents selected, descriptive bibliographies for children and young adults. Instructional materials for the use of teachers and parents are also included. Focusing on the subject of archaeology, part 1 of the annotated bibliography presents instructional materials coded for appropriate grade level use. Each entry…

  1. DIY Soundcard Based Temperature Logging System. Part II: Applications

    ERIC Educational Resources Information Center

    Nunn, John

    2016-01-01

    This paper demonstrates some simple applications of how temperature logging systems may be used to monitor simple heat experiments, and how the data obtained can be analysed to get some additional insight into the physical processes. [For "DIY Soundcard Based Temperature Logging System. Part I: Design," see EJ1114124.

  2. Diagnosis and local management of breast cancer: part II.

    PubMed

    Benson, John R

    2011-08-01

    This is the second of a two-part conference report and covers the other main themes of the Second Kyoto Breast Cancer Consensus Conference (KBCCC) including ductal carcinoma in situ, sentinel lymph node biopsy and therapeutic algorithms for local management of breast cancer. Once again, this report emphasizes conclusions from the consensus sessions that were a key feature of the KBCCC.

  3. Laboratory Animal Housing--Parts I and II.

    ERIC Educational Resources Information Center

    Runkle, Robert S.

    1963-01-01

    In recent years, the use of laboratory animals for bio-medical research has shown marked increase. Economic and efficient housing is a necessity. This two part report established guidelines for design and selection of materials for conventional animal housing. Contents include--(1) production and breeding facilities, (2) quarantine facilities, (3)…

  4. Aesthetic Pursuits: Windows, Frames, Words, Images--Part II

    ERIC Educational Resources Information Center

    Burke, Ken

    2005-01-01

    In Part I of this study (Burke, 2005), the author presented the essentials of Image Presentation Theory--IPT--and its application to the analytical explication of various spatial designs in and psychological responses to images, from the illusions of depth in what is referred to as "windows" in cinema theory to the more patterned abstractions of…

  5. Part I. Mechanisms of injury associated with extracorporeal shock wave lithotripsy; Part II. Exsolution of volatiles

    NASA Astrophysics Data System (ADS)

    Howard, Danny Dwayne

    Part I - Shock waves are focused in extracorporeal shock wave lithotripsy (ESWL) machines to strengths sufficient to fracture kidney stones. Substantial side effects-most of them acute-have resulted from this procedure, including injury to soft tissue. The focusing of shock waves through various layers of tissue is a complex process which stimulates many bio-mechano-chemical responses.This thesis presents results of an in vitro study of the initial mechanical stimulus. Planar nitrocellulose membranes of order 10 um thick were used as models of thin tissue structures. Two modes of failure were recorded: Failure due to cavitation collapsing on or near the membranes, and failure induced by altering the structure of shock waves. Tests were done in water at and around F2 to characterize the extent of cavitation damage, and was found to be confined within the focal region, 1.2 cm along the axis of focus.Scattering media were used to simulate the effects of acoustic nonuniformity of tissue and to alter the structure of focusing shock waves. 40 um diameter (average) hollow glass spheres were added to ethylene glycol, glycerine and castor oil to vary the properties of the scattering media. Multiple layer samples of various types of phantom tissue were tested in degassed castor oil to gauge the validity of the scattering media. The scattering media and tissue samples increased the rise time decreased strain rate in a similar fashion. Membranes were damaged by the decreased strain rate and accumulated effects of the altered structure: After about 20 or so shocks immersed in the scattering media and after about 100 shocks behind the tissue samples. The mode of failure was tearing with multiple tears in some cases from about .1 cm to about 3 cm depending of the number of shocks and membrane thickness.Part II - This work examines the exsolution of volatiles-carbon dioxide from water-in a cylindrical test cell under different pressure conditions. Water was supersaturated with

  6. Leveraging business intelligence to make better decisions: Part II.

    PubMed

    Reimers, Mona

    2014-01-01

    This article is the second in a series about business intelligence (BI) in a medical practice. The first article reviewed the evolution of data reporting within the industry and provided some examples of how BI concepts differ from the reports available in the menus of our software systems, or the dashboards and scorecards practices have implemented. This article will discuss how to begin a BI initiative for front-end medical practice staffers that will create tools they can use to reduce errors and increase efficiency throughout their workday. This type of BI rollout can allow practices to get started with very little financial investment, gain enthusiasm from end users, and achieve a quick return on investment. More examples of successful BI projects in medical practices are discussed to help illustrate BI concepts.

  7. Sentinel lymph node biopsy and melanoma: 2010 update Part II.

    PubMed

    Stebbins, William G; Garibyan, Lilit; Sober, Arthur J

    2010-05-01

    This article will discuss the evidence for and against the therapeutic efficacy of early removal of potentially affected lymph nodes, morbidity associated with sentinel lymph node biopsy and completion lymphadenectomy, current guidelines regarding patient selection for sentinel lymph node biopsy, and the remaining questions that ongoing clinical trials are attempting to answer. The Sunbelt Melanoma Trial and the Multicenter Selective Lymphadenectomy Trials I and II will be discussed in detail. At the completion of this learning activity, participants should be able to discuss the data regarding early surgical removal of lymph nodes and its effect on the overall survival of melanoma patients, be able to discuss the potential benefits and morbidity associated with complete lymph node dissection, and to summarize the ongoing trials aimed at addressing the question of therapeutic value of early surgical treatment of regional lymph nodes that may contain micrometastases. Copyright 2010 American Academy of Dermatology, Inc. Published by Mosby, Inc. All rights reserved.

  8. Sixth IASLIC Seminar Papers. Part I: Reference Service-in-Action. Part II: Processing & Servicing of Special Materials in Libraries.

    ERIC Educational Resources Information Center

    Indian Association of Special Libraries & Information Centres, Calcutta (India).

    Part I contains 22 papers covering all aspects of the library reference services including sources of reference materials, an evaluation of reference sources, building a reference collection, training a reference librarian, and the needs of the industrial and medical communities for reference services. All the papers are slanted toward the special…

  9. GSTARS computer models and their applications, Part II: Applications

    USGS Publications Warehouse

    Simoes, F.J.M.; Yang, C.T.

    2008-01-01

    In part 1 of this two-paper series, a brief summary of the basic concepts and theories used in developing the Generalized Stream Tube model for Alluvial River Simulation (GSTARS) computer models was presented. Part 2 provides examples that illustrate some of the capabilities of the GSTARS models and how they can be applied to solve a wide range of river and reservoir sedimentation problems. Laboratory and field case studies are used and the examples show representative applications of the earlier and of the more recent versions of GSTARS. Some of the more recent capabilities implemented in GSTARS3, one of the latest versions of the series, are also discussed here with more detail. ?? 2008 International Research and Training Centre on Erosion and Sedimentation and the World Association for Sedimentation and Erosion Research.

  10. Wideband, low-frequency springless vibration energy harvesters: part II

    NASA Astrophysics Data System (ADS)

    Bendame, Mohamed; Abdel-Rahman, Eihab; Soliman, Mostafa

    2016-11-01

    This paper concludes a two-part investigation of a novel architecture for vibration energy harvesting (VEH), the springless VEH. In this part, we study vertical springless electromagnetic VEHs where the direction of motion is aligned with the gravitational field. Experimental results show the existence of three topologies in the response of vertical springless VEHs; linear, single-impact, and double-impact. A model, encompassing all three topologies, was developed and validated by comparison to experimental results. We found that vertical springless VEHs demonstrate low frequency harvesting (<20 Hz), widebeand harvesting (bandwidths up to \\text{BW}=11.2 Hz), and an optimal output power of P  =  7.52 mW at a base acceleration of 0.6 g. While horizontal springless VEHs typically offer more output power, the single-impact regime of the vertical springless VEHs offers the simultaneous advantages of wider harvesting bandwidths at lower operating frequencies.

  11. Achieving hemostasis in dermatology-Part II: Topical hemostatic agents.

    PubMed

    Glick, Jaimie B; Kaur, Ravneet R; Siegel, Daniel

    2013-07-01

    Bleeding is a common occurrence during any dermatologic surgery that disrupts blood vessels. The complications of excess bleeding can include delayed wound healing, hematoma formation, infection, dehiscence, and necrosis. In part one of this review, we discussed the pre-operative, intra-operative, and post-operative management of patients undergoing dermatologic surgery. In Part two, we discuss traditional and new topical hemostatic agents used to achieve hemostasis in dermatological procedures and surgery. We will evaluate the caustic and non-caustic hemostatic agents as well as hemostatic dressings. The mechanisms of action, side effect profile, and advantages and disadvantages of the topical hemostatic agents are provided. Sources for this article were found searching the English literature in PubMed for the time period 1940 to March 2012. A thorough bibliography search was also performed and key references examined.

  12. Comparison of microstickies measurement methods. Part II, Results and discussion

    Treesearch

    Mahendra R. Doshi; Angeles Blanco; Carlos Negro; Concepcion Monte; Gilles M. Dorris; Carlos C. Castro; Axel Hamann; R. Daniel Haynes; Carl Houtman; Karen Scallon; Hans-Joachim Putz; Hans Johansson; R. A. Venditti; K. Copeland; H.-M. Chang

    2003-01-01

    In part I of the article we discussed sample preparation procedure and described various methods used for the measurement of microstickies. Some of the important features of different methods are highlighted in Table 1. Temperatures used in the measurement methods vary from room temperature in some cases, 45 °C to 65 °C in other cases. Sample size ranges from as low as...

  13. Ada Integrated Environment II Computer Program Development Specification. Part 1.

    DTIC Science & Technology

    1981-12-01

    No. 6, Part 2, July-August 1978. 18. Rochkind, M. J., The Source Code Control System, IEEE Transactions on Software Engineering, SE-i, December 1975...TRACT (Continue an, reere side It noleearel and identfir &Y block number) The Ada Integrated Environment (AIE) consists of a set of software tools...intended to support design, development and maintenance of embedded computer software . A significant portion of an AIE includes software systems and

  14. Underwater Electromagnetic Sensor Networks, Part II: Localization and Network Simulations.

    PubMed

    Zazo, Javier; Macua, Sergio Valcarcel; Zazo, Santiago; Pérez, Marina; Pérez-Álvarez, Iván; Jiménez, Eugenio; Cardona, Laura; Brito, Joaquín Hernández; Quevedo, Eduardo

    2016-12-17

    In the first part of the paper, we modeled and characterized the underwater radio channel in shallowwaters. In the second part,we analyze the application requirements for an underwaterwireless sensor network (U-WSN) operating in the same environment and perform detailed simulations. We consider two localization applications, namely self-localization and navigation aid, and propose algorithms that work well under the specific constraints associated with U-WSN, namely low connectivity, low data rates and high packet loss probability. We propose an algorithm where the sensor nodes collaboratively estimate their unknown positions in the network using a low number of anchor nodes and distance measurements from the underwater channel. Once the network has been self-located, we consider a node estimating its position for underwater navigation communicating with neighboring nodes. We also propose a communication system and simulate the whole electromagnetic U-WSN in the Castalia simulator to evaluate the network performance, including propagation impairments (e.g., noise, interference), radio parameters (e.g., modulation scheme, bandwidth, transmit power), hardware limitations (e.g., clock drift, transmission buffer) and complete MAC and routing protocols. We also explain the changes that have to be done to Castalia in order to perform the simulations. In addition, we propose a parametric model of the communication channel that matches well with the results from the first part of this paper. Finally, we provide simulation results for some illustrative scenarios.

  15. Underwater Electromagnetic Sensor Networks, Part II: Localization and Network Simulations

    PubMed Central

    Zazo, Javier; Valcarcel Macua, Sergio; Zazo, Santiago; Pérez, Marina; Pérez-Álvarez, Iván; Jiménez, Eugenio; Cardona, Laura; Brito, Joaquín Hernández; Quevedo, Eduardo

    2016-01-01

    In the first part of the paper, we modeled and characterized the underwater radio channel in shallow waters. In the second part, we analyze the application requirements for an underwater wireless sensor network (U-WSN) operating in the same environment and perform detailed simulations. We consider two localization applications, namely self-localization and navigation aid, and propose algorithms that work well under the specific constraints associated with U-WSN, namely low connectivity, low data rates and high packet loss probability. We propose an algorithm where the sensor nodes collaboratively estimate their unknown positions in the network using a low number of anchor nodes and distance measurements from the underwater channel. Once the network has been self-located, we consider a node estimating its position for underwater navigation communicating with neighboring nodes. We also propose a communication system and simulate the whole electromagnetic U-WSN in the Castalia simulator to evaluate the network performance, including propagation impairments (e.g., noise, interference), radio parameters (e.g., modulation scheme, bandwidth, transmit power), hardware limitations (e.g., clock drift, transmission buffer) and complete MAC and routing protocols. We also explain the changes that have to be done to Castalia in order to perform the simulations. In addition, we propose a parametric model of the communication channel that matches well with the results from the first part of this paper. Finally, we provide simulation results for some illustrative scenarios. PMID:27999309

  16. Slag Behavior in Gasifiers. Part II: Constitutive Modeling of Slag

    SciTech Connect

    Massoudi, Mehrdad; Wang, Ping

    2013-02-07

    The viscosity of slag and the thermal conductivity of ash deposits are among two of the most important constitutive parameters that need to be studied. The accurate formulation or representations of the (transport) properties of coal present a special challenge of modeling efforts in computational fluid dynamics applications. Studies have indicated that slag viscosity must be within a certain range of temperatures for tapping and the membrane wall to be accessible, for example, between 1,300 °C and 1,500 °C, the viscosity is approximately 25 Pa·s. As the operating temperature decreases, the slag cools and solid crystals begin to form. Since slag behaves as a non-linear fluid, we discuss the constitutive modeling of slag and the important parameters that must be studied. We propose a new constitutive model, where the stress tensor not only has a yield stress part, but it also has a viscous part with a shear rate dependency of the viscosity, along with temperature and concentration dependency, while allowing for the possibility of the normal stress effects. In Part I, we reviewed, identify and discuss the key coal ash properties and the operating conditions impacting slag behavior.

  17. Fourier Transform Infrared Spectroscopy: Part II. Advantages of FT-IR.

    ERIC Educational Resources Information Center

    Perkins, W. D.

    1987-01-01

    This is Part II in a series on Fourier transform infrared spectroscopy (FT-IR). Described are various advantages of FT-IR spectroscopy including energy advantages, wavenumber accuracy, constant resolution, polarization effects, and stepping at grating changes. (RH)

  18. Fourier Transform Infrared Spectroscopy: Part II. Advantages of FT-IR.

    ERIC Educational Resources Information Center

    Perkins, W. D.

    1987-01-01

    This is Part II in a series on Fourier transform infrared spectroscopy (FT-IR). Described are various advantages of FT-IR spectroscopy including energy advantages, wavenumber accuracy, constant resolution, polarization effects, and stepping at grating changes. (RH)

  19. 40 CFR Appendix II to Part 1045 - Duty Cycles for Propulsion Marine Engines

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 33 2014-07-01 2014-07-01 false Duty Cycles for Propulsion Marine...) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM SPARK-IGNITION PROPULSION MARINE ENGINES AND VESSELS Pt. 1045, App. II Appendix II to Part 1045—Duty Cycles for Propulsion Marine Engines (a)...

  20. 40 CFR Appendix II to Part 1045 - Duty Cycles for Propulsion Marine Engines

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 32 2010-07-01 2010-07-01 false Duty Cycles for Propulsion Marine...) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM SPARK-IGNITION PROPULSION MARINE ENGINES AND VESSELS Pt. 1045, App. II Appendix II to Part 1045—Duty Cycles for Propulsion Marine Engines (a)...

  1. 40 CFR Appendix II to Part 1045 - Duty Cycles for Propulsion Marine Engines

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 34 2013-07-01 2013-07-01 false Duty Cycles for Propulsion Marine...) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM SPARK-IGNITION PROPULSION MARINE ENGINES AND VESSELS Pt. 1045, App. II Appendix II to Part 1045—Duty Cycles for Propulsion Marine Engines (a)...

  2. 40 CFR Appendix II to Part 1045 - Duty Cycles for Propulsion Marine Engines

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 33 2011-07-01 2011-07-01 false Duty Cycles for Propulsion Marine...) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM SPARK-IGNITION PROPULSION MARINE ENGINES AND VESSELS Pt. 1045, App. II Appendix II to Part 1045—Duty Cycles for Propulsion Marine Engines (a)...

  3. 31 CFR Appendix II to Part 13 - Form of Bill for Reimbursement

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 31 Money and Finance: Treasury 1 2010-07-01 2010-07-01 false Form of Bill for Reimbursement II Appendix II to Part 13 Money and Finance: Treasury Office of the Secretary of the Treasury PROCEDURES FOR... Accounting Office at such reasonable times and places as may be mutually agreed upon by said...

  4. 40 CFR Appendix II to Part 1045 - Duty Cycles for Propulsion Marine Engines

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 34 2012-07-01 2012-07-01 false Duty Cycles for Propulsion Marine...) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM SPARK-IGNITION PROPULSION MARINE ENGINES AND VESSELS Pt. 1045, App. II Appendix II to Part 1045—Duty Cycles for Propulsion Marine Engines (a)...

  5. 40 CFR Appendix II to Part 266 - Tier I Feed Rate Screening Limits for Total Chlorine

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 28 2012-07-01 2012-07-01 false Tier I Feed Rate Screening Limits for Total Chlorine II Appendix II to Part 266 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Screening Limits for Total Chlorine Terrain-adjusted effective stack height (m) Noncomplex Terrain Urban...

  6. 40 CFR Appendix II to Part 266 - Tier I Feed Rate Screening Limits for Total Chlorine

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 27 2011-07-01 2011-07-01 false Tier I Feed Rate Screening Limits for Total Chlorine II Appendix II to Part 266 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Screening Limits for Total Chlorine Terrain-adjusted effective stack height (m) Noncomplex Terrain Urban...

  7. 40 CFR Appendix II to Part 266 - Tier I Feed Rate Screening Limits for Total Chlorine

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 27 2014-07-01 2014-07-01 false Tier I Feed Rate Screening Limits for Total Chlorine II Appendix II to Part 266 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Screening Limits for Total Chlorine Terrain-adjusted effective stack height (m) Noncomplex Terrain Urban...

  8. 40 CFR Appendix II to Part 266 - Tier I Feed Rate Screening Limits for Total Chlorine

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 28 2013-07-01 2013-07-01 false Tier I Feed Rate Screening Limits for Total Chlorine II Appendix II to Part 266 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Screening Limits for Total Chlorine Terrain-adjusted effective stack height (m) Noncomplex Terrain Urban...

  9. 40 CFR Appendix II to Part 266 - Tier I Feed Rate Screening Limits for Total Chlorine

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 26 2010-07-01 2010-07-01 false Tier I Feed Rate Screening Limits for Total Chlorine II Appendix II to Part 266 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Screening Limits for Total Chlorine Terrain-adjusted effective stack height (m) Noncomplex Terrain Urban...

  10. 46 CFR Appendix II to Part 150 - Explanation of Figure 1

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... COMPATIBILITY OF CARGOES Pt. 150, App. II Appendix II to Part 150—Explanation of Figure 1 Definition of a..., the inorganic acids. The cargo groups in the compatibility chart are separated into two categories: 1... certain Reactive Groups. Cargo Groups do not react hazardously with one another. Using the Compatibility...

  11. 46 CFR Appendix II to Part 150 - Explanation of Figure 1

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... COMPATIBILITY OF CARGOES Pt. 150, App. II Appendix II to Part 150—Explanation of Figure 1 Definition of a..., the inorganic acids. The cargo groups in the compatibility chart are separated into two categories: 1... certain Reactive Groups. Cargo Groups do not react hazardously with one another. Using the Compatibility...

  12. 46 CFR Appendix II to Part 150 - Explanation of Figure 1

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... COMPATIBILITY OF CARGOES Pt. 150, App. II Appendix II to Part 150—Explanation of Figure 1 Definition of a..., the inorganic acids. The cargo groups in the compatibility chart are separated into two categories: 1... certain Reactive Groups. Cargo Groups do not react hazardously with one another. Using the Compatibility...

  13. 46 CFR Appendix II to Part 150 - Explanation of Figure 1

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... COMPATIBILITY OF CARGOES Pt. 150, App. II Appendix II to Part 150—Explanation of Figure 1 Definition of a..., the inorganic acids. The cargo groups in the compatibility chart are separated into two categories: 1... certain Reactive Groups. Cargo Groups do not react hazardously with one another. Using the Compatibility...

  14. 40 CFR Appendix II to Part 1042 - Steady-State Duty Cycles

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 33 2011-07-01 2011-07-01 false Steady-State Duty Cycles II Appendix II to Part 1042 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM NEW AND IN-USE MARINE COMPRESSION-IGNITION ENGINES AND VESSELS Pt....

  15. 40 CFR Appendix II to Part 258 - List of Hazardous Inorganic and Organic Constituents

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 26 2012-07-01 2011-07-01 true List of Hazardous Inorganic and Organic Constituents II Appendix II to Part 258 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... of Hazardous Inorganic and Organic Constituents Common name 1 CAS RN 2 Chemical abstracts...

  16. 40 CFR Appendix II to Part 258 - List of Hazardous Inorganic and Organic Constituents

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 24 2010-07-01 2010-07-01 false List of Hazardous Inorganic and Organic Constituents II Appendix II to Part 258 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... 258—List of Hazardous Inorganic and Organic Constituents Common name 1 CAS RN 2 Chemical...

  17. 40 CFR Appendix II to Part 258 - List of Hazardous Inorganic and Organic Constituents

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 26 2013-07-01 2013-07-01 false List of Hazardous Inorganic and Organic Constituents II Appendix II to Part 258 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... 258—List of Hazardous Inorganic and Organic Constituents Common name 1 CAS RN 2 Chemical...

  18. 40 CFR Appendix II to Part 258 - List of Hazardous Inorganic and Organic Constituents

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 25 2014-07-01 2014-07-01 false List of Hazardous Inorganic and Organic Constituents II Appendix II to Part 258 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... 258—List of Hazardous Inorganic and Organic Constituents Common name 1 CAS RN 2 Chemical...

  19. 40 CFR Appendix II to Part 258 - List of Hazardous Inorganic and Organic Constituents

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 25 2011-07-01 2011-07-01 false List of Hazardous Inorganic and Organic Constituents II Appendix II to Part 258 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... 258—List of Hazardous Inorganic and Organic Constituents Common name 1 CAS RN 2 Chemical...

  20. Whole effluent assessment of industrial wastewater for determination of bat compliance: Part 1: Paper manufacturing industry.

    PubMed

    Gartiser, Stefan; Hafner, Christoph; Hercher, Christoph; Kronenberger-Schäfer, Kerstin; Paschke, Albrecht

    2010-05-01

    elimination 85% in 7 days). Thus, the algae toxicity of the respective paper mill cannot be explained with the TMP partial stream; presumably other raw materials such as biocides might be the source of algae toxicity. Comparative data from wastewater surveillance of authorities confirmed the range of ecotoxicity observed in the study. Wastewater from paper mills generally has no or a moderate ecotoxicity (median LID 1 and 2) while the maximum LID values, especially for the algae and daphnia tests, are considerably elevated (LIDA up to 128, LIDD up to 48). Wastewater from paper mills generally is low to moderately ecotoxic to aquatic organisms in acute toxicity tests. Some samples show effects in the chronic algae growth inhibition test which cannot be explained exclusively with colouration of the samples. The origin of elevated algae ecotoxicity could not be determined. In the algae test, often flat dose-response relationships and growth promotion at higher dilution factors have been observed, indicating that several effects are overlapping. At least one bioassay should be included in routine wastewater control of paper mills because the paper manufacturing industry is among the most water consuming. Although the algae test was the most sensitive test, it might not be the most appropriate test because of the complex relationship of colouration and inhibition and the smooth dose-effect relationship or even promotion of algae growth often observed. The Lemna test would be a suitable method which also detects inhibitors of photosynthesis and is not disturbed by wastewater colouration.

  1. The museum maze in oral pathology demystifed: part II.

    PubMed

    Patil, Shankargouda; Rao, Roopa S; Ganavi, Bs

    2013-09-01

    Museum technology is perpetually changing due to current requirements and added inventions for our comfort and furbished display of specimens. Hence numerous methods of specimen preservation have been put on trial by diverse people in the medical feld as are the inventions. But only few have caught people's interest and are popularized today. This part provides unique insights into specialized custom-made techniques, evolution of recent advances like plastination and virtual museum that have popularized as visual delights. Plastination gives handy, perennial life-like acrylic specimens, whereas virtual museum takes museum feld to the electronic era making use of computers and virtual environment.

  2. Cancer Chemotherapy: Past, Present, and Future—Part II

    PubMed Central

    Wright, Jane C.

    1984-01-01

    Cancer is of major concern today because of its high mortality. It is estimated that 66 million people in this country will eventually develop cancer; 1983 estimates were 855,000 new cases and 440,000 deaths from cancer. Because of limitations of surgery and radiation therapy in effecting a cure for cancer, chemotherapy has become increasingly important. The developments in the chemical control of cancer in man are encouraging. This two-part paper* covers the historical milestones in the development of the chemical and hormonal control of cancer, present successes with the use of polychemotherapy, and the hopeful trend in research. PMID:6492179

  3. Responsive Persistence Part II. Practices of Postmodern Therapists.

    PubMed

    Sutherland, Olga; Dienhart, Anna; Turner, Jean

    2013-10-01

    This article, a companion to Part I of this series of articles, discusses how therapists informed by social constructionist and postmodern ideas enact persistence in their work with families. Transcripts and video-recordings of therapy interaction facilitated by selected major champions for three postmodern (collaborative) therapies: Michael White (narrative therapy), Harlene Anderson (collaborative language systems approach), and Bill O'Hanlon (solution-oriented therapy) were examined for persistence practices. The article offers a range of possible ways in which postmodern therapists may enact their influence in facilitating generative and helpful conversations with families and remain responsive to clients' preferences and understandings. Implications for family therapy practice, training, and supervision are discussed.

  4. Alkali cold gelation of whey proteins. Part II: Protein concentration.

    PubMed

    Mercadé-Prieto, Ruben; Gunasekaran, Sundaram

    2009-05-19

    The effect of the whey protein isolate (WPI) concentration on the sol-gel-sol transition in alkali cold gelation was investigated at pH 11.6-13 using oscillatory rheometry. The elastic modulus increases quickly with time to reach a local maximum (G'max), followed by a degelation step where the modulus decreases to a minimum value (G'min). Depending on the pH, a second gelation step will occur. At the end of the first gelation step around G'max, the system fulfilled the Winter-Chambon criterion of gelation. The analysis of the maximum moduli with the protein concentration shows that (i) there is a percolation concentration above which an elastic response is observed (approximately 6.8 wt %); (ii) there are two concentration regimes for G''max and G''max above this concentration, where we have considered power-law and percolation equations; (iii) there is a crossover concentration between the two regimes (at approximately 8 wt %) for both G'max and G''max when both moduli are equal, and this value is constant under all conditions tested (G'max=G''max approximately 4 Pa). Therefore, alkali cold gelation is better represented using two concentrations regimes than one, as observed for other biopolymers.

  5. Dynamic spreading of nanofluids on solids part II: modeling.

    PubMed

    Liu, Kuan-Liang; Kondiparty, Kirtiprakash; Nikolov, Alex D; Wasan, Darsh

    2012-11-27

    Recent studies on the spreading phenomena of liquid dispersions of nanoparticles (nanofluids) have revealed that the self-layering and two-dimensional structuring of nanoparticles in the three-phase contact region exert structural disjoining pressure, which drives the spreading of nanofluids by forming a continuous wedge film between the liquid (e.g., oil) and solid surface. Motivated by the practical applications of the phenomenon and experimental results reported in Part I of this two-part series, we thoroughly investigated the spreading dynamics of nanofluids against an oil drop on a solid surface. With the Laplace equation as a starting point, the spreading process is modeled by Navier-Stokes equations through the lubrication approach, which considers the structural disjoining pressure, gravity, and van der Waals force. The temporal interface profile and advancing inner contact line velocity of nanofluidic films are analyzed through varying the effective nanoparticle concentration, the outer contact angle, the effective nanoparticle size, and capillary pressure. It is found that a fast and spontaneous advance of the inner contact line movement can be obtained by increasing the nanoparticle concentration, decreasing the nanoparticle size, and/or decreasing the interfacial tension. Once the nanofluidic film is formed, the advancing inner contact line movement reaches a constant velocity, which is independent of the outer contact angle if the interfacial tension is held constant.

  6. Histologic features of alopecias: part II: scarring alopecias.

    PubMed

    Bernárdez, C; Molina-Ruiz, A M; Requena, L

    2015-05-01

    The diagnosis of disorders of the hair and scalp can generally be made on clinical grounds, but clinical signs are not always diagnostic and in some cases more invasive techniques, such as a biopsy, may be necessary. This 2-part article is a detailed review of the histologic features of the main types of alopecia based on the traditional classification of these disorders into 2 major groups: scarring and nonscarring alopecias. Scarring alopecias are disorders in which the hair follicle is replaced by fibrous scar tissue, a process that leads to permanent hair loss. In nonscarring alopecias, the follicles are preserved and hair growth can resume when the cause of the problem is eliminated. In the second part of this review, we describe the histologic features of the main forms of scarring alopecia. Since a close clinical-pathological correlation is essential for making a correct histopathologic diagnosis of alopecia, we also include a brief description of the clinical features of the principal forms of this disorder.

  7. Active flow control for a NACA-0012 Profile: Part II

    NASA Astrophysics Data System (ADS)

    Oualli, H.; Makadem, M.; Ouchene, H.; Ferfouri, A.; Bouabdallah, A.; Gad-El-Hak, M.

    2016-11-01

    Active flow control is applied to a NACA-0012 profile. The experiments are conducted in a wind tunnel. Using a high-resolution visible-light camera and tomography, flow visualizations are carried out. LES finite-volume 3D code is used to complement the physical experiments. The symmetric wing is clipped into two parts, and those parts extend and retract along the chord according to the same sinusoidal law we optimized last year for the same profile but clipped at an angle of 60 deg, instead of the original 90 deg. The Reynolds number range is extended to 500,000, thus covering the flying regimes of micro-UAVs, UAVs, as well as small aircraft. When the nascent cavity is open and the attack angle is 30 deg, the drag coefficient is increased by 1,300%, as compared to the uncontrolled case. However, when the cavity is covered and Re <=105 , a relatively small frequency, f <= 30 Hz, is required for the drag coefficient to drop to negative values. At the maximum Reynolds number, thrust is generated but only at much higher frequencies, 12 <= f <= 16 kHz.

  8. Collagenolytic (necrobiotic) granulomas: part II--the 'red' granulomas.

    PubMed

    Lynch, Jane M; Barrett, Terry L

    2004-07-01

    A collagenolytic or necrobiotic non-infectious granuloma is one in which a granulomatous infiltrate develops around a central area of altered collagen and elastic fibers. The altered fibers lose their distinct boundaries and exhibit new staining patterns, becoming either more basophilic or eosinophilic. Within the area of altered collagen, there may be deposition of acellular substances such as mucin (blue) or fibrin (red), or there may be neutrophils with nuclear dust (blue), eosinophils (red), or flame figures (red). These color distinctions can be used as a simple algorithm for the diagnosis of collagenolytic granulomas, i.e. 'blue' granulomas vs. 'red' granulomas. Eight diagnoses are included within these two groupings, which are discussed in this two-part article. In the previously published first part, the clinical presentation, pathogenesis and histologic features of the 'blue' collagenolytic granulomas were discussed. These are the lesions of granuloma annulare, Wegener's granulomatosis, and rheumatoid vasculitis. In this second half of the series, the 'red' collagenolytic granulomas are discussed; these are the lesions of necrobiosis lipoidica, necrobiotic xanthogranuloma, rheumatoid nodules, Churg-Strauss syndrome, and eosinophilic cellulitis (Well's Syndrome).

  9. Solar System: Surfing the Edge of Chaos Part II

    NASA Astrophysics Data System (ADS)

    Hayes, Wayne B.; Danforth, C. M.

    2008-05-01

    The orbital positions and masses of the Jovian planets are known only to a few parts in 107. At the 2006 DDA meeting in Halifax, I presented results, recently published in Nature Physics and MNRAS, which demonstrated the existence of both chaotic and near-regular orbits within the current observational error volume. In this talk, joint work with Chris Danforth of the University of Vermont, we present results demonstrating extremely rich structure of Lyapunov times within the uncertainty volume across many two-dimensional slices through initial-condition space. These slices include the Cartesian product of every pair of orbital semi-major axes ap, plus Cartesian products between ap and eccentricity ep for each Jovian planet p. Some of the observed structure is reminiscent of Guzzo's "Web of 3-body resonances", although it is not clear that 3-body resonances are the cause in this case since the structure extends several orders of magnitude below the scale at which Murray + Holman's 3-body resonance theory has been explored. Some of the structure is entirely unlike that seen in Guzzo's Web, and may require further theoretical development to understand. Finally, several "zoom-in” plots, reminiscent of those done for the Mandelbrot set, demonstrate that the structure continues down, at least, to scales of about one part in 109. In all cases, we verify the reliability of our integrations using convergence tests to demonstrate that the picture does not change even when the integration timestep is decreased significantly.

  10. Nanoparticles and the blood coagulation system. Part II: safety concerns.

    PubMed

    Ilinskaya, Anna N; Dobrovolskaia, Marina A

    2013-06-01

    Nanoparticle interactions with the blood coagulation system can be beneficial or adverse depending on the intended use of a nanomaterial. Nanoparticles can be engineered to be procoagulant or to carry coagulation-initiating factors to treat certain disorders. Likewise, they can be designed to be anticoagulant or to carry anticoagulant drugs to intervene in other pathological conditions in which coagulation is a concern. An overview of the coagulation system was given and a discussion of a desirable interface between this system and engineered nanomaterials was assessed in part I, which was published in the May 2013 issue of Nanomedicine. Unwanted pro- and anti-coagulant properties of nanoparticles represent significant concerns in the field of nanomedicine, and often hamper the development and transition into the clinic of many promising engineered nanocarriers. This part will focus on the undesirable effects of engineered nanomaterials on the blood coagulation system. We will discuss the relationship between the physicochemical properties of nanoparticles (e.g., size, charge and hydrophobicity) that determine their negative effects on the blood coagulation system in order to understand how manipulation of these properties can help to overcome unwanted side effects.

  11. Nanoparticles and the blood coagulation system. Part II: safety concerns

    PubMed Central

    Ilinskaya, Anna N; Dobrovolskaia, Marina A

    2014-01-01

    Nanoparticle interactions with the blood coagulation system can be beneficial or adverse depending on the intended use of a nanomaterial. Nanoparticles can be engineered to be procoagulant or to carry coagulation-initiating factors to treat certain disorders. Likewise, they can be designed to be anticoagulant or to carry anticoagulant drugs to intervene in other pathological conditions in which coagulation is a concern. An overview of the coagulation system was given and a discussion of a desirable interface between this system and engineered nanomaterials was assessed in part I, which was published in the May 2013 issue of Nanomedicine. Unwanted pro- and anti-coagulant properties of nanoparticles represent significant concerns in the field of nanomedicine, and often hamper the development and transition into the clinic of many promising engineered nanocarriers. This part will focus on the undesirable effects of engineered nanomaterials on the blood coagulation system. We will discuss the relationship between the physicochemical properties of nanoparticles (e.g., size, charge and hydrophobicity) that determine their negative effects on the blood coagulation system in order to understand how manipulation of these properties can help to overcome unwanted side effects. PMID:23730696

  12. Modified sprint interval training protocols. Part II. Psychological responses.

    PubMed

    Townsend, Logan K; Islam, Hashim; Dunn, Emily; Eys, Mark; Robertson-Wilson, Jennifer; Hazell, Tom J

    2017-04-01

    Sprint-interval training (SIT) is a viable method to improve health and fitness. However, researchers have questioned the utility of SIT because of its strenuous nature. The current study aimed to determine if manipulating the sprint and recovery duration, while maintaining the 1:8 work to rest ratio, could uncover a more favourable SIT protocol. Nine healthy active males (age, 23.3 ± 3.0 years; body mass index, 22.4 ± 2.2 kg·m(-2); maximal oxygen consumption, 48.9 ± 5.3 mL·kg(-1)·min(-1)) participated in 3 experimental running SIT sessions: (i) 30:240 (4 × 30-s efforts, 240-s recovery), (ii) 15:120 (8 × 15-s efforts, 120-s recovery), (iii) 5:40 (24 × 5-s efforts, 40-s recovery), and (iv) a final behavioural choice follow-up session. Affect, intentions, task self-efficacy, enjoyment, and preference were evaluated. Midway through exercise, affect became more positive for 5:40 compared with 30:240 (p < 0.05) and postexercise affect was greater for both 5:40 (p = 0.014) and 15:120 (p = 0.015) compared with 30:240. Participants expressed greater intentions to perform 5:40 3 and 5 times/week compared with 15:120 and 30:240 (p < 0.05). Participants felt more confident in their ability to perform 5:40 (p = 0.001) and 15:120 (p = 0.008) compared with 30:240. The 5:40 session was also rated as more enjoyable than 15:120 (p = 0.025) and 30:240 (p = 0.026). All participants preferred the 5:40 protocol. These data suggest that shorter sprints with more repetitions are perceived as more enjoyable and lead to greater intentions to engage in SIT.

  13. Planar LTCC transformers for high voltage flyback converters: Part II.

    SciTech Connect

    Schofield, Daryl; Schare, Joshua M., Ph.D.; Slama, George; Abel, David

    2009-02-01

    This paper is a continuation of the work presented in SAND2007-2591 'Planar LTCC Transformers for High Voltage Flyback Converters'. The designs in that SAND report were all based on a ferrite tape/dielectric paste system originally developed by NASCENTechnoloy, Inc, who collaborated in the design and manufacturing of the planar LTCC flyback converters. The output/volume requirements were targeted to DoD application for hard target/mini fuzing at around 1500 V for reasonable primary peak currents. High voltages could be obtained but with considerable higher current. Work had begun on higher voltage systems and is where this report begins. Limits in material properties and processing capabilities show that the state-of-the-art has limited our practical output voltage from such a small part volume. In other words, the technology is currently limited within the allowable funding and interest.

  14. Indoor Air Quality: part II--what it does.

    PubMed

    Pike-Paris, Ann

    2005-01-01

    Newton, MA. A recent report indicated air quality samples taken from several rooms in the town's North High School had elevated CO2 levels of 2,000 parts per million (ppm) (Viser, 2004). State standards set 800 ppm as the optimum reading. Although not an immediate health issue, high CO2 levels are indicative of poor air circulation--clean air comes in but stale air is not vented out. Safety issues arise in the school setting when chemicals or toxic substances are in use and cannot be vented, therefore posing the health risk (Viser, 2004). Poor Indoor Air Quality (IAQ) in schools can result in decreased academic performance and days lost due to illness in the school age population (Environmental Protection Agency [EPA], 2003). As the school nurse at North High School, what would you do?

  15. Theory of edge radiation. Part II: Advanced applications

    NASA Astrophysics Data System (ADS)

    Geloni, Gianluca; Kocharyan, Vitali; Saldin, Evgeni; Schneidmiller, Evgeni; Yurkov, Mikhail

    2009-08-01

    In this paper we exploit a formalism to describe edge radiation, which relies on Fourier optics techniques [G. Geloni, V. Kocharyan, E. Saldin, E. Schneidmiller, M. Yurkov, Theory of edge radiation. Part I: foundations and basic applications, submitted for publication]. First, we apply our method to develop an analytical model to describe edge radiation in the presence of a vacuum chamber. Such model is based on the solution of the field equation with a tensor Green's function technique. In particular, explicit calculations for a circular vacuum chamber are reported. Second, we consider the use of edge radiation as a tool for electron-beam diagnostics. We discuss coherent edge radiation, extraction of edge radiation by a mirror, and other issues becoming important at high electron energy and long radiation wavelength. Based on this work we also study the impact of edge radiation on X-ray Free-Electron Laser (XFEL) setups and we discuss recent results.

  16. Solar box-cooker: Part II-analysis and simulation

    SciTech Connect

    Thulasi Das, T.C. ); Karmakar, S. ); Rao, D.P. )

    1994-03-01

    Based on the model proposed in the companion paper (Part I), a method is outlined simulation of the solar box-cookers loaded with one, two, or four vessels. The relative importance of various heat-exchange rates in the cooker were examined. The effect of parameters such as the thickness and size of the absorber plate, emissivity of the vessel, insulation thickness, and cooking time were studied. Cookers of three sizes were simulated to assess their adequacy in cooking. The studies indicate that the black paint on the vessels could be avoided if weathered stainless steel or aluminum vessels are used. The cooker with inner dimensions of 0.6 x 0.6 x 0.1 m[sup 3] was found to be adequate to cook lunch and dinner on a clear day even in the winter months. Experimental studies carried out to obtain the heat-transfer coefficients, required for simulation, are presented.

  17. Cervical spondylotic myelopathy: Part II: clinical and imaging considerations *

    PubMed Central

    Burns, SH; O’Connor, SM; Mior, SA

    1991-01-01

    In this, the second of a two part series, we continue to review the recent literature pertaining to cervical spondylotic myelopathy (CSM). Caused by the compromise of the spinal canal resulting from the superimposition of spondylotic changes upon a congenitally narrowed canal, CSM has a predictable radiographic and clinical presentation. The clinical presentation frequently includes both upper and lower motor neuron signs and symptoms. Careful analysis of the plain film images usually reveals a spinal canal measuring 12 mm or less. Additional imaging modalities confirm the diagnosis. This paper presents the clinical and imaging characteristics underlying CSM and stresses the importance of including CSM in the differential diagnosis of patients complaining of neck and leg dysfunctions. ImagesFigure 1Figure 2Figure 3Figure 4

  18. Hours, Wages and Related Payments in the Ontario Construction Industry, 1973. Part I.

    ERIC Educational Resources Information Center

    Ontario Dept. of Labour, Toronto. Research Branch.

    This is the first part of a study directed at supplying information about labor relations in the construction industry in Ontario. Presented in tables by occupations are data pertaining to: (1) straight time hourly wage rates, (2) employee payments for vacations and other fringe benefits, (3) daily and weekly hours paid at straight time rates, (4)…

  19. Operational Control Procedures for the Activated Sludge Process, Part I - Observations, Part II - Control Tests.

    ERIC Educational Resources Information Center

    West, Alfred W.

    This is the first in a series of documents developed by the National Training and Operational Technology Center describing operational control procedures for the activated sludge process used in wastewater treatment. Part I of this document deals with physical observations which should be performed during each routine control test. Part II…

  20. MONGOLS OF THE TWENTIETH CENTURY, PART II. URALIC AND ALTAIC SERIES, VOLUME 37, PART 2.

    ERIC Educational Resources Information Center

    RUPEN, ROBERT A.

    THIS BIBLIOGRAPHY DIRECTLY SUPPLEMENTS AND IS INTENDED AS AN INTEGRAL PART OF "MONGOLS OF THE TWENTIETH CENTURY, PART I." THE RANGE OF SUBJECT MATTER, HOWEVER, GOES FAR BEYOND THE SPECIFIC CONCERNS OF THE FIRST VOLUME, COVERING GENERAL AND SPECIFIC BIBLIOGRAPHIES, UNSIGNED REPORTS AND DOCUMENTS, ENCYCLOPEDIAS, OFFICIAL HISTORIES,…

  1. A Linear Stochastic Dynamical Model of ENSO. Part II: Analysis.

    NASA Astrophysics Data System (ADS)

    Thompson, C. J.; Battisti, D. S.

    2001-02-01

    In this study the behavior of a linear, intermediate model of ENSO is examined under stochastic forcing. The model was developed in a companion paper (Part I) and is derived from the Zebiak-Cane ENSO model. Four variants of the model are used whose stabilities range from slightly damped to moderately damped. Each model is run as a simulation while being perturbed by noise that is uncorrelated (white) in space and time. The statistics of the model output show the moderately damped models to be more realistic than the slightly damped models. The moderately damped models have power spectra that are quantitatively quite similar to observations, and a seasonal pattern of variance that is qualitatively similar to observations. All models produce ENSOs that are phase locked to the annual cycle, and all display the `spring barrier' characteristic in their autocorrelation patterns, though in the models this `barrier' occurs during the summer and is less intense than in the observations (inclusion of nonlinear effects is shown to partially remedy this deficiency). The more realistic models also show a decadal variability in the lagged autocorrelation pattern that is qualitatively similar to observations.Analysis of the models shows that the greatest part of the variability comes from perturbations that project onto the first singular vector, which then grow rapidly into the ENSO mode. Essentially, the model output represents many instances of the ENSO mode, with random phase and amplitude, stimulated by the noise through the optimal transient growth of the singular vectors.The limit of predictability for each model is calculated and it is shown that the more realistic (moderately damped) models have worse potential predictability (9-15 months) than the deterministic chaotic models that have been studied widely in the literature. The predictability limits are strongly correlated with the stability of the models' ENSO mode-the more highly damped models having much shorter

  2. Practice improvement, part II: update on patient communication technologies.

    PubMed

    Roett, Michelle A; Coleman, Mary Thoesen

    2013-11-01

    Patient portals (ie, secure web-based services for patient health record access) and secure messaging to health care professionals are gaining popularity slowly. Advantages of web portals include timely communication and instruction, access to appointments and other services, and high patient satisfaction. Limitations include inappropriate use, security considerations, organizational costs, and exclusion of patients who are uncomfortable with or unable to use computers. Attention to the organization's strategic plan and office policies, patient and staff expectations, workflow and communication integration, training, marketing, and enrollment can facilitate optimal use of this technology. Other communication technologies that can enhance patient care include automated voice or text reminders and brief electronic communications. Social media provide another method of patient outreach, but privacy and access are concerns. Incorporating telehealthcare (health care provided via telephone or Internet), providing health coaching, and using interactive health communication applications can improve patient knowledge and clinical outcomes and provide social support. Written permission from the American Academy of Family Physicians is required for reproduction of this material in whole or in part in any form or medium.

  3. Imaging of juvenile idiopathic arthritis. Part II: Ultrasonography and MRI

    PubMed Central

    Grochowska, Elżbieta; Gietka, Piotr; Płaza, Mateusz; Pracoń, Grzegorz; Saied, Fadhil; Walentowska-Janowicz, Marta

    2016-01-01

    Juvenile idiopathic arthritis is the most common autoimmune systemic disease of the connective tissue affecting individuals in the developmental age. Radiography, which was described in the first part of this publication, is the standard modality in the assessment of this condition. Ultrasound and magnetic resonance imaging enable early detection of the disease which affects soft tissues, as well as bones. Ultrasound assessment involves: joint cavities, tendon sheaths and bursae for the presence of synovitis, intraand extraarticular fat tissue to visualize signs of inflammation, hyaline cartilage, cartilaginous epiphysis and subchondral bone to detect cysts and erosions, and ligaments, tendons and their entheses for signs of enthesopathies and tendinopathies. Magnetic resonance imaging is indicated in children with juvenile idiopathic arthritis for assessment of inflammation in peripheral joints, tendon sheaths and bursae, bone marrow involvement and identification of inflammatory lesions in whole-body MRI, particularly when the clinical picture is unclear. Also, MRI of the spine and spinal cord is used in order to diagnose synovial joint inflammation, bone marrow edema and spondylodiscitis as well as to assess their activity, location, and complications (spinal canal stenosis, subluxation, e.g. in the atlantoaxial region). This article discusses typical pathological changes seen on ultrasound and magnetic resonance imaging. The role of these two methods for disease monitoring, its identification in the pre-clinical stage and establishing its remission are also highlighted. PMID:27679727

  4. Eponyms in cardiothoracic radiology--part II: vascular.

    PubMed

    Mohammed, Tan-Lucien H; Saettele, Megan R; Saettele, Timothy; Patel, Vikas; Kanne, Jeffrey P

    2014-01-01

    Eponyms serve the purpose of honoring individuals who have made important observations and discoveries. As with other fields of medicine, eponyms are frequently encountered in radiology, particularly in chest radiology. However, inappropriate use of an eponym may lead to potentially dangerous miscommunication. Moreover, an eponym may honor the incorrect person or a person who falls into disrepute. Despite their limitations, eponyms are still widespread in the medical literature. Furthermore, in some circumstances, more than one individual may have contributed to the description or discovery of a particular anatomical structure or disease, whereas in others, an eponym may have been incorrectly applied initially and propagated for years in the medical literature. Nevertheless, radiologic eponyms are a means of honoring those who have made lasting contributions to the field of radiology, and familiarity with these eponyms is critical for proper reporting and accurate communication. In addition, the acquisition of some historical knowledge about those whose names are associated with various structures or pathologic conditions conveys a sense of humanity in the science of medicine. In this second part of a multipart series, the authors discuss a number of chest radiology eponyms as they relate to the pulmonary vasculature, including relevant clinical and imaging features, as well biographic information of the respective eponym׳s namesake.

  5. Simulation of Slag Freeze Layer Formation: Part II: Numerical Model

    NASA Astrophysics Data System (ADS)

    Guevara, Fernando J.; Irons, Gordon A.

    2011-08-01

    The experiments from Part I with CaCl2-H2O solidification in a differentially heated, square cavity were simulated in two dimensions using a control volume technique in a fixed grid. The test conditions and physical properties of the fluid resulted in Prandtl and Rayleigh numbers in the range of 50 and 2.1 × 108, respectively, and the solidification was observed to be planar with dispersed solid particles. In the mathematical model, temperature-dependent viscosity and density functions were employed. To suppress velocities in the solid phase, various models were tested, and a high effective viscosity was found most appropriate. The results compare well with the experiments in terms of solid layer growth, horizontal and vertical velocities, heat transfer coefficients, and temperature distributions. Hydrodynamic boundary layers on the solidified front and on the hot vertical wall tend to be nonsymmetric, as well on the top and bottom adiabatic walls. The high viscosity value imposed on the two-phase zone affects the velocity profile close to the solid front and modifies the heat transfer rate.

  6. Medicine at the crossroads. Part II. Summary of completed project

    SciTech Connect

    1998-05-01

    Medicine at the crossroads (a.k.a. The Future of Medicine) is an 8-part series of one-hour documentaries which examines the scientific and social forces that have shaped the practice of medicine around the world. The series was developed and produced over a five-year period and in eleven countries. Among the major issues examined in the series are the education of medical practitioners and the communication of medical issues. The series also considers the dilemmas of modern medicine, including the treatment of the elderly and the dying, the myth of the quick fix in the face of chronic and incurable diseases such as HIV, and the far-reaching implications of genetic treatments. Finally, the series examines the global progress made in medical research and application, as well as the questions remaining to be answered. These include not only scientific treatment, but accessibility and other critical topics affecting the overall success of medical advances. Medicine at the crossroads is a co-production of Thirteen/WNET and BBC-TV in association with Television Espafiola SA (RTVE) and the Australian Broadcasting Corporation. Stefan Moore of Thirteen/WNET and Martin Freeth of BBC-TV are series producers. George Page is executive in charge of medicine at the crossroads. A list of scholarly advisors and a program synopses is attached.

  7. Practice improvement, part II: trends in employment versus private practice.

    PubMed

    Coleman, Mary Thoesen; Roett, Michelle A

    2013-11-01

    A growing percentage of physicians are selecting employment over solo practice, and fewer family physicians have hospital admission privileges. Results from surveys of recent medical school graduates indicate a high value placed on free time. Factors to consider when choosing a practice opportunity include desire for independence, decision-making authority, work-life balance, administrative responsibilities, financial risk, and access to resources. Compensation models are evolving from the simple fee-for-service model to include metrics that reward panel size, patient access, coordination of care, chronic disease management, achievement of patient-centered medical home status, and supervision of midlevel clinicians. When a practice is sold, tangible personal property and assets in excess of liabilities, patient accounts receivable, office building, and goodwill (ie, expected earnings) determine its value. The sale of a practice includes a broad legal review, addressing billing and coding deficiencies, noncompliant contractual arrangements, and potential litigations as well as ensuring that all employment agreements, leases, service agreements, and contracts are current, have been executed appropriately, and meet regulatory requirements. Written permission from the American Academy of Family Physicians is required for reproduction of this material in whole or in part in any form or medium.

  8. Bridging the Skills Gap. Working Paper Part II: High Technology and Related Occupations.

    ERIC Educational Resources Information Center

    Kaplan, Christine E.

    This part of a 2-part working paper identifies and describes major occupational groups that are characteristic of high technology manufacturing and service industries as well as employment sectors that use high technology products in their provision of goods and services. The paper is based on a review of a wide range of employment projections…

  9. Affirmatives and Negatives of Space-Career Prospects-Part II.

    ERIC Educational Resources Information Center

    Bole-Becker, Luanne C.

    1990-01-01

    The second part of a two-part series on careers in the space program discusses the academic credentials and experience required for various career paths within the space industry. NASA-sponsored cooperative training and research programs for undergraduate and graduate students are listed and discussed. (TE)

  10. Current and future industrial energy service characterizations. Volume II. Energy data on the US manufacturing subsector

    SciTech Connect

    Krawiec, F.; Thomas, T.; Jackson, F.; Limaye, D.R.; Isser, S.; Karnofsky, K.; Davis, T.D.

    1980-10-01

    In order to characterize industrial energy service, current energy demand, its end uses, and cost of typical energy applications and resultant services in the industrial sector were examined and a projection of state industrial energy demands and prices to 1990 was developed. Volume II presents in Section 2 data on the US manufacturing subsector energy demand, intensity, growth rates, and cost for 1971, 1974, and 1976. These energy data are disaggregated not only by fuel type but also by user classifications, including the 2-digit SIC industry groups, 3-digit subgroups, and 4-digit SIC individual industries. These data characterize typical energy applications and the resultant services in this subsector. The quantities of fuel and electric energy purchased by the US manufacturing subsector were converted to British thermal units and reported in billions of Btu. The conversion factors are presented in Table 4-1 of Volume I. To facilitate the descriptive analysis, all energy cost and intensity data were expressed in constant 1976 dollars. The specific US industrial energy service characteristics developed and used in the descriptive analysis are presented in Volume I. Section 3 presents the computer program used to produce the tabulated data.

  11. Research Summary No. 36-3, Volume I, Part II. Volume I, Part Two

    NASA Technical Reports Server (NTRS)

    1960-01-01

    The Research Summary is a bimonthly report of supporting research and development conducted at the Jet Propulsion Laboratory. This periodical is issued in three volumes. Volume I contains summaries of the work accomplished by the Space Sciences, Systems, Guidance and Control, and Telecommunications Divisions of the Laboratory. Volume II contains summaries of the work accomplished by the Physical Sciences, Engineering Mechanics, Engineering Facilities, and Propulsion Divisions. All work of a classified nature is contained in Volume Ill.

  12. Studies in Enrollment Trends and Patterns. Part II--Summer Quarter: 1940-1964.

    ERIC Educational Resources Information Center

    Schmid, Calvin F.; Watson, F. Jean

    This is the second part of a report on major facets of institutional change at the University of Washington. Part II is a detailed analysis of Summer Quarter students and covers: class differentials in enrollment trends; trends in undergraduate students by major field and college; trends in graduate and professional students by major field and…

  13. Medical Education: Barefoot Doctors, Health Care, Health Education, Nursing Education, Pharmacy Education, Part II.

    ERIC Educational Resources Information Center

    Parker, Franklin

    1987-01-01

    This is Part II of a two-part annotated bibliography of selected references on medical education in the People's Republic of China. The references date from 1913 to 1982. Most of the references are from the 1960's and 1970's. (RH)

  14. An Occupation and Participation Approach to Reading Intervention (OPARI) Part II: Pilot Clinical Application

    ERIC Educational Resources Information Center

    Grajo, Lenin C.; Candler, Catherine

    2016-01-01

    The Occupation and Participation Approach to Reading Intervention (OPARI) is an intervention approach for children with reading difficulties that emphasizes reading as an important occupation of children. Part I presented the theoretical basis of the OPARI. Part II describes a pilot clinical application of the OPARI. Guided by Schkade and…

  15. An Occupation and Participation Approach to Reading Intervention (OPARI) Part II: Pilot Clinical Application

    ERIC Educational Resources Information Center

    Grajo, Lenin C.; Candler, Catherine

    2016-01-01

    The Occupation and Participation Approach to Reading Intervention (OPARI) is an intervention approach for children with reading difficulties that emphasizes reading as an important occupation of children. Part I presented the theoretical basis of the OPARI. Part II describes a pilot clinical application of the OPARI. Guided by Schkade and…

  16. Why does Bangladesh remain so poor? Part II: eight answers.

    PubMed

    Maloney, C

    1985-01-01

    Bangladeshis of varying background all over the country were asked why they think poverty persists to such an extent in Bangladesh. Their answers provide a new perspective on the situation. The initial response often blames outside and natural causes -- floods, droughts, lack of resources, low demand for the country's exports, or historic exploitation. It is true that Bangladesh has virtually no mineral resources except gas. Yet, the soil, water, and human labor add up to a huge potential. The Third Five Year Plan emphasizes use of the soil, irrigation, tanks, rivers, and human labor. These provide the only hope for reducing poverty a little during the next 5 years. Bangladeshis as well as foreign observers most commonly cite overpopulation as the cause of poverty. Population growth is a cause of present poverty in Bangladesh but is not the only cause of poverty. The Third Five Year Plan goal to reduce annual growth to 1.8% is ambitious, but even if it is achieved the population will double in a few decades. As it would most likely be impossible for Bangladesh to support such numbers and maintain political and economic stability, such growth will have to be prevented. Poverty in Bangladesh is party a result of the long history of low urbanization, weak institutions, spotty and inadequate physical infrastructure, and insufficient entrapreneurship. Other reasons cited as causes of persisting poverty include illiteracy, idleness, class exploitation, the selfishness of individuals, and a lack of trust among people. All of the efforts of the poor themselves, various agencies, and the government, as examined in the 1st part of this discussion, fail to indicate any reason to hope that poverty in Bangladesh can be dramatically reduced any time soon. The Third Five Year Plan foresees a possible reduction of the number of those in poverty by 10%. According to the Plan itself, those in or near poverty comprise 85% of the people. The conditions under which the people of some

  17. Is extreme learning machine feasible? A theoretical assessment (part II).

    PubMed

    Lin, Shaobo; Liu, Xia; Fang, Jian; Xu, Zongben

    2015-01-01

    An extreme learning machine (ELM) can be regarded as a two-stage feed-forward neural network (FNN) learning system that randomly assigns the connections with and within hidden neurons in the first stage and tunes the connections with output neurons in the second stage. Therefore, ELM training is essentially a linear learning problem, which significantly reduces the computational burden. Numerous applications show that such a computation burden reduction does not degrade the generalization capability. It has, however, been open that whether this is true in theory. The aim of this paper is to study the theoretical feasibility of ELM by analyzing the pros and cons of ELM. In the previous part of this topic, we pointed out that via appropriately selected activation functions, ELM does not degrade the generalization capability in the sense of expectation. In this paper, we launch the study in a different direction and show that the randomness of ELM also leads to certain negative consequences. On one hand, we find that the randomness causes an additional uncertainty problem of ELM, both in approximation and learning. On the other hand, we theoretically justify that there also exist activation functions such that the corresponding ELM degrades the generalization capability. In particular, we prove that the generalization capability of ELM with Gaussian kernel is essentially worse than that of FNN with Gaussian kernel. To facilitate the use of ELM, we also provide a remedy to such a degradation. We find that the well-developed coefficient regularization technique can essentially improve the generalization capability. The obtained results reveal the essential characteristic of ELM in a certain sense and give theoretical guidance concerning how to use ELM.

  18. Neuromorphic meets neuromechanics, part II: the role of fusimotor drive

    NASA Astrophysics Data System (ADS)

    Jalaleddini, Kian; Minos Niu, Chuanxin; Chakravarthi Raja, Suraj; Sohn, Won Joon; Loeb, Gerald E.; Sanger, Terence D.; Valero-Cuevas, Francisco J.

    2017-04-01

    Objective. We studied the fundamentals of muscle afferentation by building a Neuro-mechano-morphic system actuating a cadaveric finger. This system is a faithful implementation of the stretch reflex circuitry. It allowed the systematic exploration of the effects of different fusimotor drives to the muscle spindle on the closed-loop stretch reflex response. Approach. As in Part I of this work, sensory neurons conveyed proprioceptive information from muscle spindles (with static and dynamic fusimotor drive) to populations of α-motor neurons (with recruitment and rate coding properties). The motor commands were transformed into tendon forces by a Hill-type muscle model (with activation-contraction dynamics) via brushless DC motors. Two independent afferented muscles emulated the forces of flexor digitorum profundus and the extensor indicis proprius muscles, forming an antagonist pair at the metacarpophalangeal joint of a cadaveric index finger. We measured the physical response to repetitions of bi-directional ramp-and-hold rotational perturbations for 81 combinations of static and dynamic fusimotor drives, across four ramp velocities, and three levels of constant cortical drive to the α-motor neuron pool. Main results. We found that this system produced responses compatible with the physiological literature. Fusimotor and cortical drives had nonlinear effects on the reflex forces. In particular, only cortical drive affected the sensitivity of reflex forces to static fusimotor drive. In contrast, both static fusimotor and cortical drives reduced the sensitivity to dynamic fusimotor drive. Interestingly, realistic signal-dependent motor noise emerged naturally in our system without having been explicitly modeled. Significance. We demonstrate that these fundamental features of spinal afferentation sufficed to produce muscle function. As such, our Neuro-mechano-morphic system is a viable platform to study the spinal mechanisms for healthy muscle function—and its

  19. Fundamentals of Trapped Ion Mobility Spectrometry Part II: Fluid Dynamics

    NASA Astrophysics Data System (ADS)

    Silveira, Joshua A.; Michelmann, Karsten; Ridgeway, Mark E.; Park, Melvin A.

    2016-04-01

    Trapped ion mobility spectrometry (TIMS) is a new high resolution (R up to ~300) separation technique that utilizes an electric field to hold ions stationary against a moving gas. Recently, an analytical model for TIMS was derived and, in part, experimentally verified. A central, but not yet fully explored, component of the model involves the fluid dynamics at work. The present study characterizes the fluid dynamics in TIMS using simulations and ion mobility experiments. Results indicate that subsonic laminar flow develops in the analyzer, with pressure-dependent gas velocities between ~120 and 170 m/s measured at the position of ion elution. One of the key philosophical questions addressed is: how can mobility be measured in a dynamic system wherein the gas is expanding and its velocity is changing? We noted previously that the analytically useful work is primarily done on ions as they traverse the electric field gradient plateau in the analyzer. In the present work, we show that the position-dependent change in gas velocity on the plateau is balanced by a change in pressure and temperature, ultimately resulting in near position-independent drag force. That the drag force, and related variables, are nearly constant allows for the use of relatively simple equations to describe TIMS behavior. Nonetheless, we derive a more comprehensive model, which accounts for the spatial dependence of the flow variables. Experimental resolving power trends were found to be in close agreement with the theoretical dependence of the drag force, thus validating another principal component of TIMS theory.

  20. Stress analysis in oral obturator prostheses, part II: photoelastic imaging

    NASA Astrophysics Data System (ADS)

    Pesqueira, Aldiéris Alves; Goiato, Marcelo Coelho; da Silva, Emily Vivianne Freitas; Haddad, Marcela Filié; Moreno, Amália; Zahoui, Abbas; dos Santos, Daniela Micheline

    2014-06-01

    In part I of the study, two attachment systems [O-ring; bar-clip (BC)] were used, and the system with three individualized O-rings provided the lowest stress on the implants and the support tissues. Therefore, the aim of this study was to assess the stress distribution, through the photoelastic method, on implant-retained palatal obturator prostheses associated with different attachment systems: BOC-splinted implants with a bar connected to two centrally placed O-rings, and BOD-splinted implants with a BC connected to two distally placed O-rings (cantilever). One photoelastic model of the maxilla with oral-sinus-nasal communication with three parallel implants was fabricated. Afterward, two implant-retained palatal obturator prostheses with the two attachment systems described above were constructed. Each assembly was positioned in a circular polariscope and a 100-N axial load was applied in three different regions with implants by using a universal testing machine. The results were obtained through photograph record analysis of stress. The BOD system exhibited the highest stress concentration, followed by the BOC system. The O-ring, centrally placed on the bar, allows higher mobility of the prostheses and homogeneously distributes the stress to the region of the alveolar ridge and implants. It can be concluded that the use of implants with O-rings, isolated or connected with a bar, to rehabilitate maxillectomized patients allows higher prosthesis mobility and homogeneously distributes the stress to the alveolar ridge region, which may result in greater chewing stress distribution to implants and bone tissue. The clinical implication of the augmented bone support loss after maxillectomy is the increase of stress in the attachment systems and, consequently, a higher tendency for displacement of the prosthesis.

  1. FPGA-accelerated adaptive optics wavefront control part II

    NASA Astrophysics Data System (ADS)

    Mauch, S.; Barth, A.; Reger, J.; Reinlein, C.; Appelfelder, M.; Beckert, E.

    2015-03-01

    We present progressive work that is based on our recently developed rapid control prototyping system (RCP), designed for the implementation of high-performance adaptive optical control algorithms using a continuous de-formable mirror (DM). The RCP system, presented in 2014, is resorting to a Xilinx Kintex-7 Field Programmable Gate Array (FPGA), placed on a self-developed PCIe card, and installed on a high-performance computer that runs a hard real-time Linux operating system. For this purpose, algorithms for the efficient evaluation of data from a Shack-Hartmann wavefront sensor (SHWFS) on an FPGA have been developed. The corresponding analog input and output cards are designed for exploiting the maximum possible performance while not being constrained to a specific DM and control algorithm due to the RCP approach. In this second part of our contribution, we focus on recent results that we achieved with this novel experimental setup. By presenting results which are far superior to the former ones, we further justify the deployment of the RCP system and its required time and resources. We conducted various experiments for revealing the effective performance, i.e. the maximum manageable complexity in the controller design that may be achieved in real-time without performance losses. A detailed analysis of the hidden latencies is carried out, showing that these latencies have been drastically reduced. In addition, a series of concepts relating the evaluation of the wavefront as well as designing and synthesizing a wavefront are thoroughly investigated with the goal to overcome some of the prevalent limitations. Furthermore, principal results regarding the closed-loop performance of the low-speed dynamics of the integrated heater in a DM concept are illustrated in detail; to be combined with the piezo-electric high-speed actuators in the next step

  2. Surface grafted chitosan gels. Part II. Gel formation and characterization.

    PubMed

    Liu, Chao; Thormann, Esben; Claesson, Per M; Tyrode, Eric

    2014-07-29

    Responsive biomaterial hydrogels attract significant attention due to their biocompatibility and degradability. In order to make chitosan based gels, we first graft one layer of chitosan to silica, and then build a chitosan/poly(acrylic acid) multilayer using the layer-by-layer approach. After cross-linking the chitosan present in the polyelectrolyte multilayer, poly(acrylic acid) is partly removed by exposing the multilayer structure to a concentrated carbonate buffer solution at a high pH, leaving a surface-grafted cross-linked gel. Chemical cross-linking enhances the gel stability against detachment and decomposition. The chemical reaction between gluteraldehyde, the cross-linking agent, and chitosan was followed in situ using total internal reflection Raman (TIRR) spectroscopy, which provided a molecular insight into the complex reaction mechanism, as well as the means to quantify the cross-linking density. The amount of poly(acrylic acid) trapped inside the surface grafted films was found to decrease with decreasing cross-linking density, as confirmed in situ using TIRR, and ex situ by Fourier transform infrared (FTIR) measurements on dried films. The responsiveness of the chitosan-based gels with respect to pH changes was probed by quartz crystal microbalance with dissipation (QCM-D) and TIRR. Highly cross-linked gels show a small and fully reversible behavior when the solution pH is switched between pH 2.7 and 5.7. In contrast, low cross-linked gels are more responsive to pH changes, but the response is fully reversible only after the first exposure to the acidic solution, once an internal restructuring of the gel has taken place. Two distinct pKa's for both chitosan and poly(acrylic acid), were determined for the cross-linked structure using TIRR. They are associated with populations of chargeable groups displaying either a bulk like dissociation behavior or forming ionic complexes inside the hydrogel film.

  3. Fundamentals of Trapped Ion Mobility Spectrometry Part II: Fluid Dynamics.

    PubMed

    Silveira, Joshua A; Michelmann, Karsten; Ridgeway, Mark E; Park, Melvin A

    2016-04-01

    Trapped ion mobility spectrometry (TIMS) is a new high resolution (R up to ~300) separation technique that utilizes an electric field to hold ions stationary against a moving gas. Recently, an analytical model for TIMS was derived and, in part, experimentally verified. A central, but not yet fully explored, component of the model involves the fluid dynamics at work. The present study characterizes the fluid dynamics in TIMS using simulations and ion mobility experiments. Results indicate that subsonic laminar flow develops in the analyzer, with pressure-dependent gas velocities between ~120 and 170 m/s measured at the position of ion elution. One of the key philosophical questions addressed is: how can mobility be measured in a dynamic system wherein the gas is expanding and its velocity is changing? We noted previously that the analytically useful work is primarily done on ions as they traverse the electric field gradient plateau in the analyzer. In the present work, we show that the position-dependent change in gas velocity on the plateau is balanced by a change in pressure and temperature, ultimately resulting in near position-independent drag force. That the drag force, and related variables, are nearly constant allows for the use of relatively simple equations to describe TIMS behavior. Nonetheless, we derive a more comprehensive model, which accounts for the spatial dependence of the flow variables. Experimental resolving power trends were found to be in close agreement with the theoretical dependence of the drag force, thus validating another principal component of TIMS theory.

  4. Overactive bladder – 18 years – Part II

    PubMed Central

    Truzzi, Jose Carlos; Gomes, Cristiano Mendes; Bezerra, Carlos A.; Plata, Ivan Mauricio; Campos, Jose; Garrido, Gustavo Luis; Almeida, Fernando G.; Averbeck, Marcio Augusto; Fornari, Alexandre; Salazar, Anibal; Dell’Oro, Arturo; Cintra, Caio; Sacomani, Carlos Alberto Ricetto; Tapia, Juan Pablo; Brambila, Eduardo; Longo, Emilio Miguel; Rocha, Flavio Trigo; Coutinho, Francisco; Favre, Gabriel; Garcia, José Antonio; Castaño, Juan; Reyes, Miguel; Leyton, Rodrigo Eugenio; Ferreira, Ruiter Silva; Duran, Sergio; López, Vanda; Reges, Ricardo

    2016-01-01

    ABSTRACT Traditionally, the treatment of overactive bladder syndrome has been based on the use of oral medications with the purpose of reestablishing the detrusor stability. The recent better understanding of the urothelial physiology fostered conceptual changes, and the oral anticholinergics – pillars of the overactive bladder pharmacotherapy – started to be not only recognized for their properties of inhibiting the detrusor contractile activity, but also their action on the bladder afference, and therefore, on the reduction of the symptoms that constitute the syndrome. Beta-adrenergic agonists, which were recently added to the list of drugs for the treatment of overactive bladder, still wait for a definitive positioning – as either a second-line therapy or an adjuvant to oral anticholinergics. Conservative treatment failure, whether due to unsatisfactory results or the presence of adverse side effects, define it as refractory overactive bladder. In this context, the intravesical injection of botulinum toxin type A emerged as an effective option for the existing gap between the primary measures and more complex procedures such as bladder augmentation. Sacral neuromodulation, described three decades ago, had its indication reinforced in this overactive bladder era. Likewise, the electric stimulation of the tibial nerve is now a minimally invasive alternative to treat those with refractory overactive bladder. The results of the systematic literature review on the oral pharmacological treatment and the treatment of refractory overactive bladder gave rise to this second part of the review article Overactive Bladder – 18 years, prepared during the 1st Latin-American Consultation on Overactive Bladder. PMID:27176185

  5. The intra-uterine device. Part II: technical problems.

    PubMed

    Alexander, I

    1980-10-01

    In discussing the technical problems associated with the IUD, focus is on the basic insertion technique, the technique to use with the various IUDs (Copper 7, Lippes Loop, Copper T models, the Saf-T-coil, and the multiload 250), the timing of the insertion, and removal of the IUD. Bimanual examination of the pelvis must be performed before an IUD is inserted. Prior to starting the insertion, the patient should be given an explanation of what is to be done. As patients are unfamiliar with the appearance of most of the instruments, it is advisable to keep them from view. Having visualized the cervix and fixed the blades of the Cusco speculum in the open position, the cervix can be seized with a single toothed tenaculum or 7 inch Allis forceps. It is generally necessary to steady the cervix with a forcep as it straightens out the canal and uterine flexion. Sounding the uterine cavity will reveal its length and confirm any angulation. On occasion it is impossible to sound the cavity because the internal os is too tight or the endocervical canal has a pinhole external os. Force should be avoided. High fundal placement without perforating the uterus is the objective when inserting any IUD, and this is particularly important with the copper IUDs which depend on a close association of their copper elements to the endometrium. Generally, it is easier to insert a coil towards the end of the period when the cervix is partly dilated and any bleeding that occurs is masked. Insertion following abortion is commonly performed, and encouraging results have been achieved with insertions immediately postpartum. Removal can be done at any time.

  6. Part I: Microscopic description of liquid He II. Part II: Uniformly approximated WKB method as used for the calculation of phase shifts in heavy-ion collision problems

    SciTech Connect

    Suebka, P.

    1984-01-01

    In Part I, the excitation spectrum of liquid He II is obtained using the two-body potential consists of a hardcore potential plus an outside attractive potential. The sum of two gaussian potential of Khanna and Das which is similar to the Lennard-Jones potential is chosen as the attractive potential. The t-matrix method due to Brueckner and Sawada is adopted with modifications to replace the interaction potential. The spectrum gives the phonon branch and the roton dip which resemble the excitation spectrum for liquid He II. The temperature dependence of the excitation spectrum enters into calculation through the zero-momentum state occupation number. A better approximation of thermodynamic functions is obtained by extending Landau's theory to the situation where the excitation is a function of temperature as well as of momentum. Our thermodynamic calculations also bear qualitative agreement with measurements on He II as expected.

  7. Addressing future challenges for cancer services: part II.

    PubMed

    Maher, Jane; Radford, Gina

    2016-02-01

    Jane Maher & Gina Radford speak to Gemma Westcott, Commissioning Editor Jane Maher has been Macmillan's Chief Medical Officer since 1999 and now shares the role as Joint Chief Medical Officer with general practitioner Rosie Loftus, reflecting the growing need for specialists and generalists to work more effectively together. She has been an National Health Service (NHS) improvement clinical leader for over 10 years and is a Consultant Clinical Oncologist at Mount Vernon Cancer Centre and Hillingdon Hospital where she has worked for more than 20 years, during which she helped develop nonsurgical oncology services in five district general hospitals. She is a senior Clinical Lecturer at University College London and Visiting Professor in Cancer and Supportive Care at the Centre for Complexity Management at the University of Hertfordshire. Jane chaired the Maher Committee for the Department of Health in 1995, led the UK National Audit of Late Effects Pelvic Radiotherapy for the Royal College of Radiologists (RCR) in 2000 and, most recently, chaired the National Cancer Survivorship Initiative Consequences of Treatment work stream. She co-founded one of the first Cancer Support and Information services in the UK, winning the Nye Bevan award in 1992 and there are now more than 60 units based on this model. She is a member of the Older People and Cancer Clinical Advisory Group. She has written more than 100 published articles and is a UK representative for cancer survivorship in Europe and advises on cancer survivorship programs in Denmark and Canada. Gina Radford is Deputy Chief Medical Officer for England, a post she took up in January 2015. Prior to that, she has held a number of roles in public health, at local and regional level. Most recently she was Centre Director for Anglia and Essex for Public Health England, and as a part of that role helped lead nationally on the public health response to Ebola. She was until very recently Chair of one of the NICE public health

  8. PROBABILITY BASED CORROSION CONTROL FOR WASTE TANKS - PART II

    SciTech Connect

    Hoffman, E.; Edwards, T.

    2010-12-09

    As part of an ongoing study to evaluate the discontinuity in the corrosion controls at the SRS tank farm, a study was conducted this year to assess the minimum concentrations below 1 molar nitrate, see Figure 1. Current controls on the tank farm solution chemistry are in place to prevent the initiation and propagation of pitting and stress corrosion cracking in the primary steel waste tanks. The controls are based upon a series of experiments performed with simulated solutions on materials used for construction of the tanks, namely ASTM A537 carbon steel (A537). During FY09, an experimental program was undertaken to investigate the risk associated with reducing the minimum molar nitrite concentration required to confidently inhibit pitting in dilute solutions (i.e., less than 1 molar nitrate). The experimental results and conclusions herein provide a statistical basis to quantify the probability of pitting for the tank wall exposed to various solutions with dilute concentrations of nitrate and nitrite. Understanding the probability for pitting will allow the facility to make tank-specific risk-based decisions for chemistry control. Based on previous electrochemical testing, a statistical test matrix was developed to refine and solidify the application of the statistical mixture/amount model to corrosion of A537 steel. A mixture/amount model was identified based on statistical analysis of recent and historically collected electrochemical data. This model provides a more complex relationship between the nitrate and nitrite concentrations and the probability of pitting than is represented by the model underlying the current chemistry control program, and its use may provide a technical basis for the utilization of less nitrite to inhibit pitting at concentrations below 1 molar nitrate. FY09 results fit within the mixture/amount model, and further refine the nitrate regime in which the model is applicable. The combination of visual observations and cyclic

  9. Nurse staffing in a decentralized organization: part II.

    PubMed

    Althaus, J N; Hardyck, N M; Pierce, P B; Rodgers, M S

    1982-04-01

    It must be emphasized that none of the steps described in this planning process emerged overnight. Rather, they were achieved through a process of evolution, sometimes through trial and error, and always with consultation and participation by many members of the hospital nursing staff. Participation by many in the process of planning for a workable staffing system has been essential to its success. Indeed, creative scheduling by the head nurse is possible because of the way in which the system has been organized. The fact that head nurses are responsible for staffing their own units makes it infinitely easier for them to see what they need to make their units operate effectively and efficiently. Creative scheduling includes the possibility of arranging nurses' hours outside the rigid three-shift schedule used by so many hospitals. Many El Camino nurses now report for work at different hours. In addition, the use of flexible work weeks has proven valuable. Some head nurses now allow for a ten-hour, four-day work week; in emergency staffing situations there have, on occasion, been twelve-hour days. Even as this system evolves, it faces change. Just as the requirements for staff cannot be rigid, so must problem solving be flexible and constantly under review. The fact that El Camino believes in constant monitoring of its system is essential to its success. A key philosophical foundation of decentralization is that it must be subject to change. This is no less true in staffing than in other parts of the decentralization structure. By agreeing that change is constant and necessary and that participation is required at all levels of the staffing planning process, we have constructed the outlines of a system that will work in the future as well as it does in the present. Our system centers around the head nurses. It involves their planning; thus it also involves the support of those members of the nursing staff who can provide essential information. But the decisions

  10. Cardiovascular magnetic resonance physics for clinicians: part II

    PubMed Central

    2012-01-01

    This is the second of two reviews that is intended to cover the essential aspects of cardiovascular magnetic resonance (CMR) physics in a way that is understandable and relevant to clinicians using CMR in their daily practice. Starting with the basic pulse sequences and contrast mechanisms described in part I, it briefly discusses further approaches to accelerate image acquisition. It then continues by showing in detail how the contrast behaviour of black blood fast spin echo and bright blood cine gradient echo techniques can be modified by adding rf preparation pulses to derive a number of more specialised pulse sequences. The simplest examples described include T2-weighted oedema imaging, fat suppression and myocardial tagging cine pulse sequences. Two further important derivatives of the gradient echo pulse sequence, obtained by adding preparation pulses, are used in combination with the administration of a gadolinium-based contrast agent for myocardial perfusion imaging and the assessment of myocardial tissue viability using a late gadolinium enhancement (LGE) technique. These two imaging techniques are discussed in more detail, outlining the basic principles of each pulse sequence, the practical steps required to achieve the best results in a clinical setting and, in the case of perfusion, explaining some of the factors that influence current approaches to perfusion image analysis. The key principles of contrast-enhanced magnetic resonance angiography (CE-MRA) are also explained in detail, especially focusing on timing of the acquisition following contrast agent bolus administration, and current approaches to achieving time resolved MRA. Alternative MRA techniques that do not require the use of an endogenous contrast agent are summarised, and the specialised pulse sequence used to image the coronary arteries, using respiratory navigator gating, is described in detail. The article concludes by explaining the principle behind phase contrast imaging techniques

  11. Implementing a predictive modeling program, part II: Use of motivational interviewing in a predictive modeling program.

    PubMed

    Calhoun, Jean; Admire, Kaye S

    2005-01-01

    This is the second article of a two-part series about issues encountered in implementing a predictive modeling program. Part I looked at how to effectively implement a program and discussed helpful hints and lessons learned for case managers who are required to change their approach to patients. In Part II, we discuss the readiness to change model, examine the spirit of motivational interviewing and related techniques, and explore how motivational interviewing is different from more traditional interviewing and assessment methods.

  12. Decontamination technologies for release from bioprocessing facilities. Part I. Introduction. Part II. Decontamination of wastewater

    SciTech Connect

    Wickramanayake, G.B. )

    1990-01-01

    Genetically engineered microorganisms are widely used in biotechnology. Wastewater from bioprocessing facilities will require treatment to ensure that effluents discharged into surface water or other waste streams are not a source of viable organisms or transmittable genetic material. The application of treatment technologies used in other industries to decontaminate the releases from biotechnology processing facilities was evaluated. Since published literature on the inactivation of recombinant-DNA organisms is very limited, information for bacteria, viruses, fungi and subcellular components was obtained. The data indicated that ozone, chlorine, chlorine dioxide, heat, ultraviolet light and ionizing radiation offer good performance potential for decontamination of rDNA processing wastewater. 180 refs., 7 figs., 26 tabs.

  13. DOD USER-NEEDS STUDY, PHASE II -- FLOW OF SCIENTIFIC AND TECHNICAL INFORMATION WITHIN THE DEFENSE INDUSTRY. FINAL REPORT. VOLUME II, A. TECHNICAL DESCRIPTION, B. TECHNICAL APPENDICES.

    ERIC Educational Resources Information Center

    GOODMAN, ARNOLD F.; AND OTHERS

    IN PHASE II OF THE DEPARTMENT OF DEFENSE (DOD) SURVEY TO FIND OUT HOW SCIENTISTS AND ENGINEERS IN GOVERNMENT AND INDUSTRIAL RESEARCH, DEVELOPMENT, AND PRODUCTION ACTIVITIES ACQUIRE INFORMATION, SCIENTIFIC PERSONNEL IN THE DEFENSE INDUSTRY WERE INTERVIEWED TO DETERMINE THEIR INFORMATION NEEDS AND THE FLOW OF INFORMATION INHERENT IN SATISFYING THESE…

  14. DOD USER-NEEDS STUDY, PHASE II -- FLOW OF SCIENTIFIC AND TECHNICAL INFORMATION WITHIN THE DEFENSE INDUSTRY. FINAL REPORT. VOLUME II, A. TECHNICAL DESCRIPTION, B. TECHNICAL APPENDICES.

    ERIC Educational Resources Information Center

    GOODMAN, ARNOLD F.; AND OTHERS

    IN PHASE II OF THE DEPARTMENT OF DEFENSE (DOD) SURVEY TO FIND OUT HOW SCIENTISTS AND ENGINEERS IN GOVERNMENT AND INDUSTRIAL RESEARCH, DEVELOPMENT, AND PRODUCTION ACTIVITIES ACQUIRE INFORMATION, SCIENTIFIC PERSONNEL IN THE DEFENSE INDUSTRY WERE INTERVIEWED TO DETERMINE THEIR INFORMATION NEEDS AND THE FLOW OF INFORMATION INHERENT IN SATISFYING THESE…

  15. Guidelines for clinical engineering programs--Part I: guidelines for electrical isolation; Part II: performance evaluation of clinical engineering programs.

    PubMed

    Ridgway, M

    1980-01-01

    This series presents guidelines for: electrically isolated inputs and outputs; measuring the performance of hospital biomedical engineering programs; evaluating the risk of electric shock in hospitals; and for isolated power in anesthetizing locations. In Part I, specific recommendations are given for the use of insulated approach, battery-powered monitors in surgery, and for isolation requirements for devices connected to cardiac leads. In Part II, checklists are provided for the self-evaluation of an in-house, biomedical engineering staff. Parts III and IV, in future issues of this Journal, will include discussion of the theoretical electrical hazard potential in reference to the use of isolated power systems. The question of whether isolated power should be required in all anesthetizing locations will be discussed in Part IV.

  16. On Idiosyncratic Systems. Part I. Idiosyncratic Systems. Part II. On Being Creative with Computer Aided Design.

    DTIC Science & Technology

    1977-03-31

    Catholic, good singer, vowel at the end of his name , likes pasta and red wine . Traversing this continuum has the intriguing property of reordering...feeling of transcendence , an aesthetic pleasure , or a good laugh. While one is 1101 Steven Coons, Computer graphics, initrodu ctionu . no less...a t i v - ’ - t , cL l e m s i - i - aesthetics , vol. 10, January 1970, 58—70. ‘.- i : i c~~, I:i tertia t nos ,ri l__liOirt:al ob ts:t,”tsa

  17. Synchrotron X-ray CT characterization of titanium parts fabricated by additive manufacturing. Part II. Defects.

    PubMed

    Scarlett, Nicola Vivienne Yorke; Tyson, Peter; Fraser, Darren; Mayo, Sheridan; Maksimenko, Anton

    2016-07-01

    Synchrotron X-ray tomography (SXRT) has been applied to the study of defects within three-dimensional printed titanium parts. These parts were made using the Arcam EBM(®) (electron beam melting) process which uses powdered titanium alloy, Ti64 (Ti alloy with approximately 6%Al and 4%V) as the feed and an electron beam for the sintering/welding. The experiment was conducted on the Imaging and Medical Beamline of the Australian Synchrotron. The samples represent a selection of complex shapes with a variety of internal morphologies. Inspection via SXRT has revealed a number of defects which may not otherwise have been seen. The location and nature of such defects combined with detailed knowledge of the process conditions can contribute to understanding the interplay between design and manufacturing strategy. This fundamental understanding may subsequently be incorporated into process modelling, prediction of properties and the development of robust methodologies for the production of defect-free parts.

  18. Use of sepiolite as an adsorbent for the removal of copper (II) from industrial waste leachate

    NASA Astrophysics Data System (ADS)

    Gamze Turan, N.; Ardali, Yüksel

    2013-04-01

    as talc, but it has discontinuities and inversion of the silica sheets, which give rise to structural tunnels and blocks. In the inner blocks, all corners of the silica tetrahedral are connected to adjacent blocks, but in the outer blocks, some of the corners are Si atoms bound to hydroxyls (Si-OH). This unique structure allows the penetration of organic and inorganic species into the structure and assigns sepiolite an industrial importance in adsorption. The objective of the present study is to investigate the feasibility of using sepiolite for the adsorptive removal of Cu (II) from the industrial waste leachate. The adsorption capacities and sorption efficiencies are determined. The pseudo first order, the pseudo-second order, Elovich and the intra particle diffusion kinetic models are used to describe the kinetic data to estimate the rate constants. The adsorption of Cu (II) from the aqueous leachate of industrial wastes onto sepiolite was performed using a batch equilibrium technique. At first stage, one-factor-at-a-time experiments were performed to see the individual effects of initial pH, adsorbent dosage and contact time. The adsorption of Cu (II) was favorably influenced by an increase in the adsorbent dosage. The maximum percent removal of Cu (II) were observed at pH>6, and significantly decreased at lower pH value. The optimum contact time is found as 10 min. for the removal of Cu (II). The increment in contact time from 10 min. to 120 min. did not show a significant effect on efficiency. The maximum Cu (II) adsorption efficiencies were obtained at 94.45%. The pseudo second order kinetic model agrees very well with the dynamical behavior for the adsorption of Cu (II) from aqueous leachate of industrial waste onto sepiolite. The results indicate that the use of sepiolite that is locally available and almost free of cost as an adsorbent could be a viable alternative to activated carbon for the removal of Cu (II) ions from aqueous solutions.

  19. Helping Children Cope with Fears and Stress. Part I: Discussion and Activities. Part II: Facilitator's Guide.

    ERIC Educational Resources Information Center

    Robinson, Edward H.; And Others

    How fears, phobias, anxiety and stress develop in elementary school students and how these students can be assisted in coping with fears and stress are discussed in this book. Part 1, "Discussion and Activities," contains six sections. Section 1 presents an overview of fears, and stress in children. Section 2 presents 12 fear-specific activities…

  20. Factors Related to the Pronunciation of Vowel Clusters. Part II (of 3 Parts).

    ERIC Educational Resources Information Center

    Johnson, Dale D.

    Children's pronunciations of vowel clusters in synthetic words were analyzed in relation to common English words containing the same vowel clusters. Subjects were 436 elementary students of both high and low reading levels from a suburban, an urban, and a rural community. Conclusions of the study, reported in Part 2, were (1) pronunciations more…

  1. The Didactics of Biology. A Selected Bibliography for 1979. Part I [and] Part II.

    ERIC Educational Resources Information Center

    Altmann, Antonin, Ed.; Lipertova, Pavla, Ed.

    Selected articles on various aspects of biology teaching published in 1979 have been annotated in this two-part bibliography. Entries from 18 journals representing 11 different countries are presented according to a topic area classification scheme listed in the table of contents. Countries represented include: Australia; Bulgaria; Czechoslovakia;…

  2. The Didactics of Biology. A Selected Bibliography for 1979. Part I [and] Part II.

    ERIC Educational Resources Information Center

    Altmann, Antonin, Ed.; Lipertova, Pavla, Ed.

    Selected articles on various aspects of biology teaching published in 1979 have been annotated in this two-part bibliography. Entries from 18 journals representing 11 different countries are presented according to a topic area classification scheme listed in the table of contents. Countries represented include: Australia; Bulgaria; Czechoslovakia;…

  3. Ontario Universities Benefits Survey 1994-96. Part I: Benefits Excluding Pensions [and] Part II: Pensions.

    ERIC Educational Resources Information Center

    Council of Ontario Universities, Toronto.

    This report presents data from a survey of Ontario (Canada) universities concerning employment benefits offered in 1994-96. Part 1 covers benefits other than pensions. Tables display the information on particular benefits institution-by-institution including: administration and insurance plans, communication of benefits, proposed changes, life and…

  4. Ontario Universities Benefits Survey, 1993-94, Part I, Benefits Excluding Pensions [and] Part II: Pensions.

    ERIC Educational Resources Information Center

    Council of Senior Administrative Officers--Universities of Ontario, Toronto.

    This report presents data from a survey of Ontario (Canada) universities concerning employment benefits offered in 1993-94. Part I covers benefits other than pensions. Tables display the information on particular benefits institution-by-institution including: administration and insurance plans, communication of benefits, proposed changes,…

  5. Ontario Universities Benefits Survey 1994-96. Part I: Benefits Excluding Pensions [and] Part II: Pensions.

    ERIC Educational Resources Information Center

    Council of Ontario Universities, Toronto.

    This report presents data from a survey of Ontario (Canada) universities concerning employment benefits offered in 1994-96. Part 1 covers benefits other than pensions. Tables display the information on particular benefits institution-by-institution including: administration and insurance plans, communication of benefits, proposed changes, life and…

  6. Research and Development: A Complex Relationship Part I [and] Part II.

    ERIC Educational Resources Information Center

    Pollard, John Douglas Edward

    Part 1 of this document describes the background, format, and early groundwork that went into the development of a test sponsored entirely by private enterprise. The discipline imposed by a financial bottom line imposes special pressures but also offers new opportunities. This private enterprise model is a multi-constructional process where…

  7. Part I. Ridge fringe field multidomain homeotropic liquid crystal display. Part II. Solution characterization of PANI-CSA/m-cresol system

    NASA Astrophysics Data System (ADS)

    Cai, Chen

    1999-10-01

    Part I. A ridge fringe field multi- domain homeotropic (RFFMH) liquid crystal display (LCD) was made and its properties were demonstrated with a wider viewing angle. In this LCD, ridges are built on top of the ITO layer of the color filter to control the pretilt direction of liquid crystal molecules, substituting the rubbing treatment. Photolithography is used as the method to build ridges. Ridges are made from a negative photoresist, which can be manipulated by controlling exposure, bake temperature and time (including softbake and post-expose-bake), and development. The combination effect of ridge structure and pixel fringe field controls the tilting direction of the liquid crystal molecules when a voltage is applied to a pixel, yielding a wide viewing angle. Compared with the conventional TN LCD, this particular type of LCD has some advantages, such as the absence of rubbing treatment, a wider viewing angle, faster response time, better dark state, and higher contrast ratio (larger than 300). Ultimately, these advantages will possibly enable RFFMH LCD to replace the conventional TN LCD in the computer industry and other industries. Part II. Solutions of polyaniline (PANI) doped with camphor sulfonic acid (CSA) in m-cresol were studied with UV-VIS, NIR, DSC, TGA, conductivity measurement and X-ray diffraction. Solutions with different PANI/CSA molar ratios were prepared. All the measurements suggest that (i)m-cresol is a better solvent for PANI compared with chloroform and NMP. The reason is that m-cresol can have hydrogen-bonding and phenyl-phenyl interaction with polymer chains, which leads to deaggregation of the polymer chains. It solvates and slightly dopes PANI. (ii)at the molar ratio of 1:0.7 (PANI:CSA), the highest doping level was achieved, at which point the strongest PANI-CSA-m- cresol interaction was observed. In addition, at this particular ratio, the highest conductivity ( ~ 340S/cm) and degree of crystallinity were obtained.

  8. 40 CFR Appendix A to Part 136 - Methods for Organic Chemical Analysis of Municipal and Industrial Wastewater

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... of Municipal and Industrial Wastewater A Appendix A to Part 136 Protection of Environment... Chemical Analysis of Municipal and Industrial Wastewater Method 601—Purgeable Halocarbons 1. Scope and... tested by 15 laboratories using reagent water, drinking water, surface water, and industrial wastewaters...

  9. 29 CFR Appendix A to Part 1926 - Designations for General Industry Standards Incorporated Into Body of Construction Standards

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... REGULATIONS FOR CONSTRUCTION Pt. 1926, App. A Appendix A to Part 1926—Designations for General Industry Standards Incorporated Into Body of Construction Standards New Designations for General Industry Standards... 29 Labor 8 2013-07-01 2013-07-01 false Designations for General Industry Standards Incorporated...

  10. 29 CFR Appendix A to Part 1926 - Designations for General Industry Standards Incorporated Into Body of Construction Standards

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... REGULATIONS FOR CONSTRUCTION Pt. 1926, App. A Appendix A to Part 1926—Designations for General Industry Standards Incorporated Into Body of Construction Standards New Designations for General Industry Standards... 29 Labor 8 2014-07-01 2014-07-01 false Designations for General Industry Standards Incorporated...

  11. 29 CFR Appendix A to Part 1926 - Designations for General Industry Standards Incorporated Into Body of Construction Standards

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... REGULATIONS FOR CONSTRUCTION Pt. 1926, App. A Appendix A to Part 1926—Designations for General Industry Standards Incorporated Into Body of Construction Standards New Designations for General Industry Standards... 29 Labor 8 2012-07-01 2012-07-01 false Designations for General Industry Standards Incorporated...

  12. 77 FR 14403 - Guidance for Industry and Food and Drug Administration Staff; Class II Special Controls Guidance...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-03-09

    ... HUMAN SERVICES Food and Drug Administration Guidance for Industry and Food and Drug Administration Staff; Class II Special Controls Guidance Document: Norovirus Serological Reagents; Availability AGENCY: Food and Drug Administration, HHS. ACTION: Notice. SUMMARY: The Food and Drug Administration (FDA)...

  13. Thermal stress analysis of fused-cast AZS refractories during production; Part 1: Industrial study

    SciTech Connect

    Cockcroft, S.L.; Brimacombe, J.K. . Centre for Metallurgical Process Engineering); Walrod, D.G.; Myles, T.A. . Monofrax-S Plant)

    1994-06-01

    A study has been conducted to understand and prevent the formation of cracks in alumina-zirconia-silica (AZS) refractory blocks during solidification processing. A fundamental approach has been taken, centered on the development of a three-dimensional mathematical model to predict heat flow and stress generation in fused-cast AZS refractory blocks. In the first part of a two-part study, the voidless'' casting process has been carefully examined in an industrial setting. From a survey of the distribution, frequency of occurrence, and fracture surface morphology of cracks, an attempt was made to link the crack types found in the study to process variables. In-mold temperature data collected for a single casting throughout the normal cooling period have been used to validate the heat-flow model which is described in Part 2. The stress analysis, cause of the different cracks, and remedial action are also presented in Part 2.

  14. Packed bed column studies on lead(II) removal from industrial wastewater by modified Agaricus bisporus.

    PubMed

    Long, Yunchuan; Lei, Daiyin; Ni, Jiangxia; Ren, Zhuolin; Chen, Can; Xu, Heng

    2014-01-01

    Agaricus bisporus showed best performance in removing Pb(II) with a biosorption capacity of 86.4 mg g(-1) after modification with NaOH. In this work, the removal of Pb(II) from wastewater has been conducted in column mode. The metal removal was dependent on the flow rate, initial metal concentration, and bed height. The experimental data obtained from the biosorption process was successfully correlated with the Bohart-Adams, Thomas, and Yoon-Nelson models. Five biosorption-desorption cycles yielded 95.34%, 92.27%, 90.13%, 86.75%, and 81.52% regeneration, respectively. Pb(II) could be effectively removed from industrial wastewater; some metal ions and organics were also removed concomitantly, and the obtained effluent had characteristics of better quality. The results confirmed that modified A. bisporus could be applied for the removal of heavy metals from industrial wastewater in a continuous column process. Copyright © 2013 Elsevier Ltd. All rights reserved.

  15. Biosorptive Removal of Ni(Ii) from Wastewater and Industrial Effluent

    PubMed Central

    Pandey, Piyush Kant; Choubey, Shweta; Verma, Yashu; Pandey, Madhurima; Kalyan Kamal, S. S.; Chandrashekhar, K.

    2007-01-01

    The objective of the present work was to investigate the removal of Ni(II) by the fresh biomass (FBM) and chemically treated leached biomass (LBM) of Calotropis procera. The scope of the work included screening of the biosorbents for their metal uptake potential, batch equilibrium, column mode removal studies and kinetic studies at varying pH (2–6), contact time, biosorbent dosages (1–25 g/L) and initial metal ion concentration (5–500 mg/L). The development of batch kinetic model and determination of order, desorption studies, column studies were investigated. It was observed that pH had marked effect on the Ni(II) uptake. Langmuir and Freundlich models were used to correlate equilibrium data on sorption of Ni(II) metallic ion by using both FBM and LBM at 28°C and pH 3 and different coefficients were calculated. It was found that both biomasses were statistically significant fit for Freundlich model. The biomass was successfully used for removal nickel from synthetic and industrial effluents and the technique appears industrially applicable and viable. PMID:18180544

  16. Adsorptive removal of Cu(II) and Ni(II) from single-metal, binary-metal, and industrial wastewater systems by surfactant-modified alumina.

    PubMed

    Khobragade, Moni U; Pal, Anjali

    2015-01-01

    Batch adsorption was carried out to investigate the possibility of utilizing surfactant-modified alumina (SMA) as an adsorbent for the removal of Cu(II) and Ni(II) from single-metal and binary-metal solutions. Scanning electron microscopic (SEM) images of SMA before and after metal removal from single-metal matrix, showed no significant changes, whereas energy dispersive X-ray (EDX) studies confirmed the incorporation of Cu(II) (∼ 0.74 atomic%) and Ni(II) (∼ 0.64 atomic%) on the adsorbent surface. The removal of Cu(II) and Ni(II), using SMA depends on contact time, adsorbent dose and medium pH. The sorption kinetics followed pseudo-second-order model for Cu(II). However, for Ni(II), either pseudo-first-order or pseudo-second-order model is applicable. The batch experimental data were fitted to Langmuir and Freundlich isotherm, and based on the correlation coefficient value (R(2)), the adsorption could be described more precisely by the Freundlich isotherm. The maximum adsorption capacity from Langmuir isotherm of Cu(II) was 9.34 mg g(-1) and for Ni(II) 6.87 mg g(-1). In a synthetic binary mixture of Cu(II) and Ni(II), having a concentration of 10 mg L(-1) each, removal of Cu(II) was better. The treatment method was further applied to real wastewater from an electroplating industry. The batch experiment results showed that SMA was effective in the simultaneous removal of Cu(II) and Ni(II) to a significant extent, with additional improvement of water quality of the industrial effluent considered.

  17. Understanding Medicines: Conceptual Analysis of Nurses' Needs for Knowledge and Understanding of Pharmacology (Part I). Understanding Medicines: Extending Pharmacology Education for Dependent and Independent Prescribing (Part II).

    ERIC Educational Resources Information Center

    Leathard, Helen L.

    2001-01-01

    Part I reviews what nurses need to know about the administration and prescription of medicines. Part II addresses drug classifications, actions and effects, and interactions. Also discussed are the challenges pharmacological issues pose for nursing education. (SK)

  18. LWRS II&C Industry and Regulatory Engagement Activities for FY 11

    SciTech Connect

    Ken Thomas

    2011-09-01

    To ensure broad industry support and coordination for the Advanced Instrumentation, Information, and Controls (II&C) Systems Technologies research pathway, an engagement process will be continually pursued with nuclear asset owners, vendors, and suppliers, Nuclear Regulatory Commission (NRC), and the major industry support organizations of Electric Power Research Institute (EPRI), Institute of Nuclear Power Operations (INPO), and Nuclear Energy Institute (NEI). Nuclear asset owner engagement is a necessary and enabling activity to obtain data and accurate characterization of long-term operational challenges, assess the suitability of proposed research for addressing long-term needs, and gain access to data and representative infrastructure and expertise needed to ensure success of the proposed research and development (R&D) activities. Engagement with vendors and suppliers will ensure that vendor expectations and needs can be translated into requirements that can be met through technology commercialization.

  19. Study of the Utah uranium-milling industry. Volume II. Utah energy resources: uranium

    SciTech Connect

    Millar, R.D.; Neilson, L.T.; Turley, R.E.

    1980-07-01

    This report is a general overview of the uranium mining and milling industry and its history and present status with particular reference to Utah. This volume serves two purposes: (1) it serves as a companion volume to Volume I, which is a policy analysis; and (2) it serves as one of a set of energy resource assessment studies previously performed by the authors. The following topics are covered: development of the uranium industry on the Colorado Plateau with emphasis on Utah; geology of uranium; uranium reserves; uranium exploration in Utah; uranium ore production and mining operation in Utah; uranium milling operations in Utah; utilization of uranium; uranium mill tailings; and future outlook. Appendices on pricing of uranium and incentives for production since World War II are also presented.

  20. Rapid and direct electrochemical determination of Ni(II) in industrial discharge water.

    PubMed

    Ferancová, Adriana; Hattuniemi, Maarit K; Sesay, Adama M; Räty, Jarkko P; Virtanen, Vesa T

    2016-04-05

    Industrial water contains a number of contaminants, such as organic pollutants and heavy metals, which can significantly affect the quality of soil, ground and environmental waters. We have successfully optimized and tested an electrochemical method and sensor modified with dimethylglyoxime for monitoring of nickel(II). The detection limit was 0.03mg/L and determination limit was 0.09mg/L. Linear concentration range was observed from 0.06 to 0.5mg/L Ni(II) and it is suitable for the analysis of environmental waters. The effect of all parameters important for on-site measurements (such as interferences, presence of dissolved oxygen, temperature) was investigated and considered in the analysis of mine discharge water. Water samples were analyzed without any pretreatment or filtration. A low level of error (5.6%) was observed for analysis demonstrating the usability of the optimized sensor and method for on-site measurements.

  1. Health care technology assessment: implications for modern medical practice. Part II. Decision making on technology adoption.

    PubMed

    Pierce, Read G; Bozic, Kevin J; Hall, Bruce Lee; Breivis, James

    2007-02-01

    Health care technology assessment, the multidisciplinary evaluation of clinical and economic aspects of technology, has come to have an increasingly important role in health policy and clinical decision-making. In Part I--Understanding Technology Adoption and Analyses--this review addressed the difficult challenges posed by assessment and provided a guide to the methodologies used. Part II presents the factors that drive the technology choices made by patients, by individual physicians, by provider groups, and by hospital administrators.

  2. Models and the dynamics of theory-building in physics. Part II-Case studies

    NASA Astrophysics Data System (ADS)

    Emch, Gérard G.

    In Part I, it was argued that models are best explained by considering the strategies from which they issue. A distinction was proposed between two classes of modeling that contribute to theory-building: H-modeling and L-modeling. Case studies are presented in this Part II to illustrate the characteristic features of these modeling strategies; examples are drawn from classical statistical mechanics and quantum physics.

  3. A Study to Determine the Optimal Frequency for Conducting Periodic Dental Examinations, Recruit Needs. Part II.

    DTIC Science & Technology

    1980-06-01

    HEALTH CARE STUDIES DIVISION REPORT #80-004 A STUDY TO DETERMINE THE OPTIMAL FREQUENCY FOR CONDUCTING PERIODIC DENTAL EXAMINATIONS RECRUIT NEEDS (Part...CONDUCTING PERIODIC DENTAL EXAMINATIONS - RECRUIT July 1979 to June 1980 NEEDS PART II G. PERFORMING ORG. REPORT NUMBER 7. AUTHOR(*) 8. CONTRACT OR GRANT...KEY WORDS (Continue an reveree side if neceeary end Identify by block number) Dental ; Recruits; Care needs; Treatment Time; Age; Oral health 2a *srhA&T

  4. Reclamation and groundwater restoration in the uranium milling industry: An assessment of UMTRCA, title II

    SciTech Connect

    Collins, J.D.

    1996-12-31

    In 1978, Congress passed the Uranium Mill Tailings Radiation Control Act (UMTRCA) to regulate the disposal and reclamation of uranium mill tailings.This article examines the implementation of this legislation through eight cases of uranium mills in New Mexico, Wyoming, and Utah now being reclaimed. The eight cases examined here make up an important part of the total reclamation picture in the uranium milling industry.

  5. President's Task Force on Communications Policy. Staff Paper Five. Part II.

    ERIC Educational Resources Information Center

    President's Task Force on Communications Policy, Washington, DC.

    The second part of a staff paper to the President's Task Force on Communications Policy dealing with the domestic telecommunications carrier industry consists of the final two appendices. In the first, the history, structure, present services, and future plans of the Western Union Telegraph Company are discussed. Evidence is given that by allowing…

  6. Biology--Chemistry--Physics, Students' Guide, A Three-Year Sequence, Parts I and II.

    ERIC Educational Resources Information Center

    Scott, Arthur; And Others

    Parts I and II of the students' guide to the three-year integrated biology, chemistry, and physics course being prepared by the Portland Project Committee are contained in this guide. A committee reviewed and selected material developed by the national course improvement groups--Physical Science Study Committee, Chemical Bond Approach, Chemical…

  7. Student Performance on the NBME Part II Subtest and Subject Examination in Obstetrics-Gynecology.

    ERIC Educational Resources Information Center

    Metheny, William P.; Holzman, Gerald B.

    1988-01-01

    Comparison of the scores of 342 third-year medical students on the National Board of Medical Examiners subject examination and the Part II subtest on obstetrics-gynecology found significantly better performance on the former, suggesting a need to interpret the scores differently. (Author/MSE)

  8. Title II, Part A: Don't Scrap It, Don't Dilute It, Fix It

    ERIC Educational Resources Information Center

    Coggshall, Jane G.

    2015-01-01

    The Issue: Washington is taking a close look at Title II, Part A (Title IIA) of the Elementary and Secondary Education Act (ESEA) as Congress debates reauthorization. The program sends roughly $2.5 billion a year to all states and nearly all districts to "(1) increase student academic achievement through strategies such as improving teacher…

  9. Instructional Climates in Preschool Children Who Are At-Risk. Part II: Perceived Physical Competence

    ERIC Educational Resources Information Center

    Robinson, Leah E.; Rudisill, Mary E.; Goodway, Jacqueline D.

    2009-01-01

    In Part II of this study, we examined the effect of two 9-week instructional climates (low-autonomy [LA] and mastery motivational climate [MMC]) on perceived physical competence (PPC) in preschoolers (N = 117). Participants were randomly assigned to an LA, MMC, or comparison group. PPC was assessed by a pretest, posttest, and retention test with…

  10. Managing the care of health and the cure of disease--Part II: Integration.

    PubMed

    Glouberman, S; Mintzberg, H

    2001-01-01

    The development of appropriate levels of integration in the system of health care and disease cure will require stronger collective cultures and enhanced communication among the key actors. Part II of this paper uses this line of argument to reframe four major issues in this system: coordination of acute cure and of community care, and collaboration in institutions and in the system at large.

  11. Student Performance on the NBME Part II Subtest and Subject Examination in Obstetrics-Gynecology.

    ERIC Educational Resources Information Center

    Metheny, William P.; Holzman, Gerald B.

    1988-01-01

    Comparison of the scores of 342 third-year medical students on the National Board of Medical Examiners subject examination and the Part II subtest on obstetrics-gynecology found significantly better performance on the former, suggesting a need to interpret the scores differently. (Author/MSE)

  12. 48 CFR 15.204-3 - Part II-Contract Clauses.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 1 2011-10-01 2011-10-01 false Part II-Contract Clauses. 15.204-3 Section 15.204-3 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION... uniform contract format. An index may be inserted if this section's format is particularly complex. ...

  13. 48 CFR 15.204-3 - Part II-Contract Clauses.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 48 Federal Acquisition Regulations System 1 2013-10-01 2013-10-01 false Part II-Contract Clauses. 15.204-3 Section 15.204-3 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION... uniform contract format. An index may be inserted if this section's format is particularly complex. ...

  14. Instructional Climates in Preschool Children Who Are At-Risk. Part II: Perceived Physical Competence

    ERIC Educational Resources Information Center

    Robinson, Leah E.; Rudisill, Mary E.; Goodway, Jacqueline D.

    2009-01-01

    In Part II of this study, we examined the effect of two 9-week instructional climates (low-autonomy [LA] and mastery motivational climate [MMC]) on perceived physical competence (PPC) in preschoolers (N = 117). Participants were randomly assigned to an LA, MMC, or comparison group. PPC was assessed by a pretest, posttest, and retention test with…

  15. Thermoelectric Properties of Pristine and Doped Graphene Nanosheets and Graphene Nanoribbons: Part II

    NASA Astrophysics Data System (ADS)

    Muley, Sarang V.; Ravindra, N. M.

    2016-06-01

    In Part II of this study, approaches to improve the thermoelectric figure of merit ( ZT) of graphene nanosheets and nanoribbons is discussed. The presence of vacancies in graphene is found to increase the ZT of zigzag graphene nanoribbons significantly. Graphene can be a promising material with much better thermoelectric performance than conventional thermoelectrics.

  16. Electrical/Electronic Technology (Energy/Power). Industrial Arts, Senior High--Level II. North Dakota Senior High Industrial Arts Curriculum Guides.

    ERIC Educational Resources Information Center

    Lawrence, Allen; And Others

    This course guide for an electrical/electronic technology course is one of four developed for the energy/power area in the North Dakota senior high industrial arts education program. (Eight other guides are available for two other areas of Industrial Arts--graphic communications and production.) Part 1 provides such introductory information as a…

  17. Coupled ADCIRC Model Systems Part I: HYCOM/ADCIRC Part II: HLRDHM/SWAN/ADCIRC

    NASA Astrophysics Data System (ADS)

    Kolar, R. L.; Dresback, K. M.; Blain, C. A.; Luettich, R.; Cooten, S. V.; Gourley, J. J.; Hong, Y.; Cambazoglu, M. K.; Szpilka, C.; Nemunaitis, K.; Szpilka, A.

    2010-12-01

    ADCIRC (Advanced CIRCulation) is a 2D/3D hydrodynamic model based on the St. Venant equations subject to the standard Boussinesq approximation; applications over its 20-year history range from predicting the effects of coastal dredging to developing a tidal database to estimating the extent of hurricane storm surge inundation. In order to extend the capabilities of ADCIRC and improve its predictive ability in these and other applications, the development team has been coupling ADCIRC to other models, either dynamically or one-way, depending on the physics of the problem. Herein, we discuss two such coupled systems. In the first, 3D baroclinic ADCIRC is coupled to the regional HYCOM model. The work is motivated by our interest in using an unstructured, high resolution, near-coastal model to capture the complex fluid dynamics that occurs in topographically-challenging regions. Specifically, this presentation will summarize the procedures as applied to the coupled HYCOM/ADCIRC system in the Northern Gulf of Mexico. In the second part of the presentation, 2D ADCIRC is dynamically coupled to the SWAN wave model, and the HLRDHM hydrologic model provides fresh water inflows for major rivers and tributaries. The objective of this work is to generate a more holistic description of coastal flooding due to the combined effects of hurricane storm surge and upland runoff. Furthermore, it addresses NOAA’s call for a “total water level” prediction system. Initially, it is being tested on the Tar-Neuse-Pamlico Sound basin in North Carolina; preliminary results from Hurricane Isabel hindcasts will be shown. Hurricane Isabel significant wave heights (m) and wind vectors (m/s) at 1600 UTC 18 September 2003 for the coastal regions of North Carolina using the coupled HLRDHM/SWAN/ADCIRC system.

  18. The development of the quartz crystal oscillator industry of World War II.

    PubMed

    Thompson, Richard J

    2005-05-01

    This paper offers a history of a critical episode in military and electronics history-the difficult creation of quartz crystal frequency control units for radio communications during World War II. As a means of controlling the frequencies of radio transmitters and receivers, amateur radio hobbyists quickly accepted the quartz crystal oscillator after its initial development in the late 1920s. The military, however, declined to adopt this technology until just prior to World War II. Due to the small market for crystal oscillators, no mass production industry had ever developed to produce this extremely high precision electronic component. As war engulfed the nation, the U.S. Army Signal Corps found itself in the dangerous position of having gambled the integrity of its communications equipment on a component that could not possibly be produced in the quantities immediately needed. This paper looks at the challenges the United States faced in building a crystal manufacturing capability and in supplying this industry with sufficient supplies of raw quartz. A fairly specialized component of communications technology emerged from spare beginnings in prewar amateur radio to become the very foundation of a wide range of electronic devices today.

  19. The Basket Method for Selecting Balanced Samples. Part II. Applications to Price Estimation.

    DTIC Science & Technology

    1981-12-01

    AD-AI12 949 CLEMSON UNIV SC OEPT OF MATHEMATICAL SCIENCES F/B 12/1 THE BASKET METHOD FOR SELECTING BALANCED SAMPLES. PART 11. APPL-ETC(U) DEC SI K T...1111󈧝 1.4 1.6 MICROCOPY RESOLUTION TEST CHARTNN’( 4~ THE BASKET METHOD FOR SELECTING BALANCED SAMPLES - PART II: APPLICATIONS TO PRICE ESTIMATION * K...for Selecting Balanced Samples Part I: Applications to Price Estimation AB9TRACT The "Basket Method" of sampling, a tool designed to achieve

  20. Three dimensional reconstruction of irregular industrial sheetmetal parts based on structured light

    NASA Astrophysics Data System (ADS)

    Zhang, Jianqing; Zheng, Li

    2005-10-01

    On the basis of the rigorous theories of the digital photogrammetry and the latest research achievements in computer vision and image processing pattern recognition, it is studied for three dimensional(3-D) reconstruction of irregular industrial sheetmetal parts by using the projector and CCD camera in this paper. As the surface of sheetmetal parts is short of the applicable texture for image matching, it is designed that structured light from the projector is projected onto the surface of sheetmetal parts as it were put on an available texture artificially. Supposed that the image acquired from CCD camera is the left image and the suppositional image from the projector is the right image. Then the image acquired from CCD camera is made edge detection, in which the extracted curves are made curve matching with the suppositional lines from the projector. While made fully use of the feature of the right image obtained from the projector and collinearity equations, the spacial point coordinates on the surface of the sheetmetal parts are obtained quickly by space intersection. Then 3-D reconstruction of the sheetmetal parts is completed after merging all the models. The untouched method which has high efficiency and strong flexibility can be successfully adapted to reconstruct various kinds of shapes and some soft objects.

  1. In vitro performance of Class I and II composite restorations: a literature review on nondestructive laboratory trials--part II.

    PubMed

    Dietschi, D; Argente, A; Krejci, I; Mandikos, M

    2013-01-01

    A literature review was conducted on adhesive Class I and II restorations and nondestructive in vitro tests using the PubMed/Medline database for the 1995-2010 period. The first part of this review has presented and critically appraised selected literature dealing with the quality and in vitro behavior of adhesive Class II restorations using photoelasticity, finite element analysis, and microleakage study protocols. This second part reviews additional parameters, which are deformation and fracture resistance to cyclic loading, shrinkage stress and tooth deformation following restoration placement, bond strength (microtensile, tensile, and shear tests), and marginal and internal adaptation. In addition, a "relevance score" has been proposed that aims to classify the different study protocols according, firstly, to the resulting quality, quantity, and consistency of the evidence and then, secondly, to their potential clinical relevance, as estimated by their ability to simulate oral and biomechanical strains. The highest clinical relevance was attributed to marginal and internal adaptation studies, following cyclic loading in a moist environement. However, a combination of in vitro protocols will have an even greater predictive potential and has to be considered as a crucial preclinical research approach with which to investigate the numerous restorative configurations that cannot be efficiently and rapidly tested in vivo.

  2. Basic Principles of Industrial Engineering (The National Shipbuilding Research Program)

    DTIC Science & Technology

    1987-10-01

    PRINCIPLES OF INDUSTRIAL ENGINEERING U.S. DEPARTMENT OF TRANSPORTATION...TITLE AND SUBTITLE The National Shipbuilding Research Program, Basic Principles of Industrial Engineering 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c...Part II Part III BASIC PRINCIPLES OF INDUSTRIAL ENGINEERING What is Industrial Engineering Operational Questions for Industrial Engineers

  3. Confirming the validity of Part II of the National Board Dental Examinations: a practice analysis.

    PubMed

    Kramer, Gene A; Neumann, Laura M

    2003-12-01

    Successful completion of Part II of the National Board Dental Examinations is a part of the licensure process for dentists. Good testing practice requires that the content of a high stakes examination like Part II be based on a strong relationship between the content and the judgments of practicing dentists on what is important to their practice of dentistry. In an effort to demonstrate this relationship for Part II, the Joint Commission conducted a practice analysis, which involved a two-dimensional model. The sixty-three Competencies of the New Dentist, developed and promulgated by the American Dental Education Association, were used for one dimension, and the current content specifications were used for the other. A survey of 520 practicing dentists was conducted to determine the importance of each of the competencies for patient care. These dentists were recent graduates of accredited programs and passed Part II three to five years prior to the conduct of the practice analysis. The survey directed the respondents to rate the importance of the competencies on a scale from 1 to 5. Of the 520 in the sample, 244 dentists responded. The reliability index was above 0.90. The importance rating for each competency was translated into the associated number of items. The number of items devoted to each competency was allocated to the current content elements that are related to the knowledge and problem-solving skills that support each competency. The findings specified revisions in the relative number of items dedicated to the various elements in the specifications. These findings indicate that the items on the examination under the current distribution adequately reflected practice. In general, there were relatively small changes in the content specifications. The total number of changes in items was forty-eight, which represents changes in slightly less than 10 percent of the overall number of items.

  4. Part I. The fire properties of polymer clay nanocomposites. Part II. Thermal rearrangement of donor-acceptor substituted cyclopropanes

    NASA Astrophysics Data System (ADS)

    Su, Shengpei

    2003-08-01

    This work consists of two parts. Part I, which includes chapter 1--5, is focused on the fire properties of nanocomposites while part II deals with thermal rearrangement of the donor-acceptor cyclopropanes. In chapter 1 of the first part an introduction to the preparation of polymer-clay nanocomposites is provided along with their application to fire retardancy. Chapter 2 details the exfoliation process of clay using in situ polymerization; the results show that the exfoliation process is related to the monomer, the modified clay and the initiator. Chapter 3 concentrates on the preparation of nanocomposites by melt blending with polymer modified clays. Three different polymer modified clays (PS, PMMA and PBD modified clay) and six polymers (PS, HIPS, ABS, PMMA, PP and PE) are reported. The morphology, thermal stability, fire behavior and mechanical properties were studied. This research shows that the exfoliation process by melt blending is controlled by the types of interactions between the various polymers, the silicate surfaces and the organic modifier. The combination of polar polymer matrix and non-polar polymer modified clay with large d-spacing will be more likely to give the exfoliated nanocomposites. TGA-FTIR results show that the mechanism of degradation of polystyrene is changed in the presence of the clay. In order to better understand the effects of the organic modifier, PS surfactants with five different pendant groups, dimethylhexadecylamine, trimethylamine, dimethylbenzylamine, 1,2-dimethylimidizole and triphenylphosphine, were used and the results show that the degradation depends upon the pendant. Chapter 5 provides some suggestions for future work based upon this work. The synthesis of several new and previously reported donor-acceptor cyclopropanes is reported in part II. The study shows that the facility of the donor-acceptor cyclopropane ring cleavage is strongly influenced by the kind of activating substitutes on the cyclopropane ring, and the

  5. Whole effluent assessment of industrial wastewater for determination of BAT compliance. Part 2: metal surface treatment industry.

    PubMed

    Gartiser, Stefan; Hafner, Christoph; Hercher, Christoph; Kronenberger-Schäfer, Kerstin; Paschke, Albrecht

    2010-06-01

    maximum conductivity of the samples was 43,700 microS cm(-1) and indicates that salts might contribute to the overall toxicity. Half of the wastewater samples proved to be biologically well treatable in the Zahn-Wellens test with COD elimination above 80%, whilst the others were insufficiently biodegraded (COD elimination 28-74%). After the pretreatment in the Zahn-Wellens test, wastewater samples from four (out of ten) companies were extremely ecotoxic especially to algae (maximum LID(A) = 16,384). Three wastewater samples were genotoxic in the umu test. Applying the rules for salt correction of test results as allowed in the German Wastewater Ordinance, only a small part of toxicity could be attributed to salts. Considering the PBS, wastewater from the metal surface treatment industry exhibited very low levels of PBS. In one factory, the origin of ecotoxicity has been attributed to the organosulphide dimethyldithiocarbamate (DMDTC) used as a water treatment chemical for metal precipitation. The assumption based on rough calculation of input of the organosulphide into the wastewater was confirmed in practice by testing its ecotoxicity at the corresponding dilution ratio after pretreatment in the Zahn-Wellens test. Whilst the COD elimination of DMDTC was only 32% in 7 days, the pretreated sample exhibited a high ecotoxicity to algae (LID(A) = 1,536) and luminescent bacteria (LID(lb) = 256). Comparative data from wastewater surveillance by authorities (data from 1993 to 2007) confirmed the range of ecotoxicity observed in the study. Whilst wastewater from the metal surface treatment industry usually did not exhibit ecotoxicity (median LID 1-2), the maximum LID values reported for the algae, daphnia and luminescent bacteria tests were very high (LID(A) up to 3,072, LID(D) up to 512 and LID(lb) up to 2,048). DMDTC was found to be one important source of ecotoxicity in galvanic wastewater. DMDTC is added in surplus, and according to the supplier, the amount in excess should

  6. Percutaneous Coronary Intervention or Coronary Artery Bypass Grafting: Intervention in Older Persons with Acute Coronary Syndrome—Part II

    PubMed Central

    Sheridan, Brett C.; Stearns, Sally C.; Massing, Mark W.; Stouffer, George A.; D’Arcy, Laura P.; Carey, Timothy S.

    2009-01-01

    This is Part II of a two-part article on treatment of acute coronary syndrome in the older population. Part I (published in the October issue of Clinical Geriatrics) analyzed the differential utilization of invasive therapies with respect to age and heart disease. Part II summarizes information from the literature on acute coronary syndrome outcomes from invasive treatments (percutaneous coronary interventions or coronary artery bypass grafting) among older persons. PMID:20607092

  7. Workplace risk factors for cancer in the German rubber industry: Part 1. Mortality from respiratory cancers

    PubMed Central

    Weiland, S. K.; Straif, K.; Chambless, L.; Werner, B.; Mundt, K. A.; Bucher, A.; Birk, T.; Keil, U.

    1998-01-01

    OBJECTIVES: To determine the cancer specific mortality by work area among active and retired male workers in the German rubber industry. METHODS: A cohort of 11,663 male German workers was followed up for mortality from 1 January 1981 to 31 December 1991. Cohort members were classified as active (n = 7536) or retired (n = 4127) as of 1 January 1981 and had been employed for at least one year in one of five study plants producing tyres or technical rubber goods. Work histories were reconstructed with routinely documented "cost centre codes" which were classified into six categories: I preparation of materials; II production of technical rubber goods; III production of tyres; IV storage and dispatch; V maintenance; and VI others. Standardised mortality ratios (SMRs) adjusted for age and calendar year and 95% confidence intervals (95% CIs), stratified by work area (employment in respective work area for at least one year) and time related variables (year of hire, lagged years of employment in work area), were calculated from national reference rates. RESULTS: SMRs for laryngeal cancer were highest in work area I (SMR 253; 95% CI 93 to 551) and were significant among workers who were employed for > 10 years in this work area (SMR 330; 95% CI 107 to 779). Increased mortality rates from lung cancer were identified in work areas I (SMR 162; 95% CI 129 to 202), II (SMR 134; 95% CI 109 to 163), and V (SMR 131; 95% CI 102 to 167). Mortality from pleural cancer was increased in all six work areas, and significant excesses were found in work areas I (SMR 448; 95% CI 122 to 1146), II (SMR 505; 95% CI 202 to 1040), and V (SMR 554; 95% CI 179 to 1290). CONCLUSION: A causal relation between the excess of pleural cancer and exposure to asbestos among rubber workers is plausible and likely. In this study, the pattern of excess of lung cancer parallels the pattern of excess of pleural cancer. This points to asbestos as one risk factor for the excess deaths from lung cancer among

  8. Assessment of the occupational exposure at a fertiliser industry in the northern part of Greece.

    PubMed

    Potiriadis, C; Koukouliou, V; Seferlis, S; Kehagia, K

    2011-03-01

    In the northern part of Greece, close to the city of Kavala, a phosphoric acid production industry has operated since 1965. The raw material used is the phosphate rock imported from the foreign countries. During industrial processes, naturally occurring radioactive materials (NORM) deposits exist in many facilities in the industry, causing increased levels of radiation exposure. Additionally, increased levels of NORM concentrations are also detected in the waste material of the production process, the phosphogypsum. According to the Greek Regulations for Radiation Protection (no. 216B, 5/3/2001), which is in accordance with the 96/29/EURATOM 31/5/1996, the action levels concerning the effective dose to workers at workplaces due to natural radiation sources are 1 mSv y(-1). Work activities where the corresponding doses exceed 6 mSv y(-1) are under the control of the Greek Atomic Energy Commission (GAEC). The mean yearly radon concentration action level at workplaces is 400 Bq m(-3), while the corresponding concentration limit is 3000 Bq m(-3), respectively. GAEC, according to its constitutional law, is the responsible organisation to enforce and to implement the law by means of in situ surveys and laboratory measurements. The first inspection of the area was performed in 2002 and the first measures were proposed. Periodic inspections were performed every 2 y in order to extend the operation licensing of the industry. In this work a dose assessment of the workers based on in situ and laboratory measurements is presented. In order to assess the doses to the workers the external and the internal doses are estimated.

  9. An International Round-Robin Study, Part II: Thermal Diffusivity, Specific Heat and Thermal Conductivity

    SciTech Connect

    Wang, Hsin; Porter, Wallace D; Bottner, Harold; Konig, Jan; Chen, Lidong; Bai, Shengqiang; Tritt, Terry M.; Mayolett, Alex; Senawiratne, Jayantha; Smith, Charlene; Harris, Fred; Gilbert, Partricia; Sharp, J; Lo, Jason; Keinke, Holger; Kiss, Laszlo I.

    2013-01-01

    For bulk thermoelectrics, figure-of-merit, ZT, still needs to improve from the current value of 1.0 - 1.5 to above 2 to be competitive to other alternative technologies. In recent years, the most significant improvements in ZT were mainly due to successful reduction of thermal conductivity. However, thermal conductivity cannot be measured directly at high temperatures. The combined measurements of thermal diffusivity and specific heat and density are required. It has been shown that thermal conductivity is the property with the greatest uncertainty and has a direct influence on the accuracy of the figure of merit. The International Energy Agency (IEA) group under the implementing agreement for Advanced Materials for Transportation (AMT) has conducted two international round-robins since 2009. This paper is Part II of the international round-robin testing of transport properties of bulk bismuth telluride. The main focuses in Part II are on thermal diffusivity, specific heat and thermal conductivity.

  10. The quantitative assessment of domino effect caused by overpressure. Part II. Case studies.

    PubMed

    Cozzani, Valerio; Salzano, Ernesto

    2004-03-19

    A quantitative assessment of the contribution to industrial risk of domino effect due to overpressure was undertaken by using the damage probability models developed in part I. Two case studies derived from the actual lay-out of an oil refinery were analyzed. Individual and societal risk indexes were estimated both in the absence and in the presence of the domino effects caused by overpressure. An increase of individual risk up to an order of magnitude was found when considering domino effects.

  11. Machinability of Green Powder Metallurgy Components: Part II. Sintered Properties of Components Machined in Green State

    NASA Astrophysics Data System (ADS)

    Robert-Perron, Etienne; Blais, Carl; Pelletier, Sylvain; Thomas, Yannig

    2007-06-01

    The green machining process is virtually a must if the powder metallurgy (PM) industries are to solve the lower machining performances associated with PM components. This process is known for lowering the rate of tool wear. Recent improvements in binder/lubricant technologies have led to high-green-strength systems that enable green machining. Combined with the optimized cutting parameters determined in Part I of the study, the green machining of PM components seems to be a viable process for fabricating high performance parts on large scale and complete other shaping processes. This second part of our study presents a comparison between the machining behaviors and the sintered properties of components machined prior to or after sintering. The results show that the radial crush strength measured on rings machined in their green state is equal to that of parts machined after sintering.

  12. Paleotectonic investigations of the Mississippian System in the United States: Parts I and II

    USGS Publications Warehouse

    Craig, Lawrence C.; Connor, Carol Waite; Others,

    1979-01-01

    This professional paper is the fifth in a series of paleotectonic studies each covering a geologic system in the conterminous United States. Part I provides a region-by-region discussion of data concerning the Mississippian System and an explanation and documentation for the maps and sections contained in part III. Part II of the paper provides a summary of the Mississippian System, presents interregional interpretations permitted by this study, and includes sections on notable features of the system. The maps contained in the separate case as part III may be divided into two groups: (1) a sequence of factual or basic maps that shows, with a minimum of interpretation, the Mississippian System as it occurs today, and (2) interpretive maps that attempt a reasonable reconstruction of the original extent of the system, its tectonics, environment, and geography.

  13. 40 CFR Appendix III to Part 266 - Tier II Emission Rate Screening Limits for Free Chlorine and Hydrogen Chloride

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 26 2010-07-01 2010-07-01 false Tier II Emission Rate Screening Limits for Free Chlorine and Hydrogen Chloride III Appendix III to Part 266 Protection of Environment... to Part 266—Tier II Emission Rate Screening Limits for Free Chlorine and Hydrogen Chloride...

  14. 40 CFR Appendix III to Part 266 - Tier II Emission Rate Screening Limits for Free Chlorine and Hydrogen Chloride

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 27 2014-07-01 2014-07-01 false Tier II Emission Rate Screening Limits for Free Chlorine and Hydrogen Chloride III Appendix III to Part 266 Protection of Environment... to Part 266—Tier II Emission Rate Screening Limits for Free Chlorine and Hydrogen Chloride...

  15. 40 CFR Appendix III to Part 266 - Tier II Emission Rate Screening Limits for Free Chlorine and Hydrogen Chloride

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 28 2012-07-01 2012-07-01 false Tier II Emission Rate Screening Limits for Free Chlorine and Hydrogen Chloride III Appendix III to Part 266 Protection of Environment... to Part 266—Tier II Emission Rate Screening Limits for Free Chlorine and Hydrogen Chloride...

  16. 40 CFR Appendix III to Part 266 - Tier II Emission Rate Screening Limits for Free Chlorine and Hydrogen Chloride

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 27 2011-07-01 2011-07-01 false Tier II Emission Rate Screening Limits for Free Chlorine and Hydrogen Chloride III Appendix III to Part 266 Protection of Environment... to Part 266—Tier II Emission Rate Screening Limits for Free Chlorine and Hydrogen Chloride...

  17. 40 CFR Appendix III to Part 266 - Tier II Emission Rate Screening Limits for Free Chlorine and Hydrogen Chloride

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 28 2013-07-01 2013-07-01 false Tier II Emission Rate Screening Limits for Free Chlorine and Hydrogen Chloride III Appendix III to Part 266 Protection of Environment... to Part 266—Tier II Emission Rate Screening Limits for Free Chlorine and Hydrogen Chloride...

  18. The structure and interpretation of cosmology: Part II. The concept of creation in inflation and quantum cosmology

    NASA Astrophysics Data System (ADS)

    McCabe, Gordon

    The purpose of the paper, of which this is part II, is to review, clarify, and critically analyse modern mathematical cosmology. The emphasis is upon mathematical objects and structures, rather than numerical computations. Part II provides a critical analysis of inflationary cosmology and quantum cosmology, with particular attention to the claims made that these theories can explain the creation of the universe.

  19. Thermoelectric Generators for Automotive Waste Heat Recovery Systems Part II: Parametric Evaluation and Topological Studies

    NASA Astrophysics Data System (ADS)

    Kumar, Sumeet; Heister, Stephen D.; Xu, Xianfan; Salvador, James R.; Meisner, Gregory P.

    2013-06-01

    A comprehensive numerical model has been proposed to model thermoelectric generators (TEGs) for automotive waste heat recovery. Details of the model and results from the analysis of General Motors' prototype TEG were described in part I of the study. In part II of this study, parametric evaluations are considered to assess the influence of heat exchanger, geometry, and thermoelectric module configurations to achieve optimization of the baseline model. The computational tool is also adapted to model other topologies such as transverse and circular configurations (hexagonal and cylindrical) maintaining the same volume as the baseline TEG. Performance analysis of these different topologies and parameters is presented and compared with the baseline design.

  20. DEUTERIUM, TRITIUM, AND HELIUM DESORPTION FROM AGED TITANIUM TRITIDES. PART II.

    SciTech Connect

    Shanahan, K; Jeffrey Holder, J

    2006-08-17

    Six new samples of tritium-aged bulk titanium have been examined by thermal desorption and isotope exchange chemistry. The discovery of a lower temperature hydrogen desorption state in these materials, previously reported, has been confirmed in one of the new samples. The helium release of the samples shows the more severe effects obtained from longer aging periods, i.e. higher initial He/M ratios. Several of the more aged samples were spontaneously releasing helium. Part I discussed the new results on the new lower temperature hydrogen desorption state found in one more extensively studied sample. Part II will discuss the hydrogen/helium release behavior of the remaining samples.

  1. Patient safety in procedural dermatology: Part II. Safety related to cosmetic procedures.

    PubMed

    Lolis, Margarita; Dunbar, Scott W; Goldberg, David J; Hansen, Timothy J; MacFarlane, Deborah F

    2015-07-01

    Cosmetic procedures are growing in popularity and are associated with unique risks. Considering potential complications and prioritizing patient safety will help practitioners improve outcomes of elective procedures. In part II of this continuing medical education article, we provide a comprehensive review of patient safety in cosmetic procedures, including medical and legal issues surrounding the supervision and training of physician extenders. Copyright © 2014 American Academy of Dermatology, Inc. Published by Elsevier Inc. All rights reserved.

  2. Predicting performance on the Medical Council of Canada Qualifying Exam Part II.

    PubMed

    Woloschuk, Wayne; McLaughlin, Kevin; Wright, Bruce

    2013-01-01

    Being able to predict which residents will likely be unsuccessful on high-stakes exams would allow residency programs to provide early intervention. To determine whether measures of clinical performance in clerkship (in-training evaluation reports) and first year of residency (program director ratings) predict pass-fail performance on the Medical Council of Canada Qualifying Exam Part II (MCCQE Part II). Residency program directors assessed the performance of our medical school graduates (Classes 2004-2007) at the end of the 1st postgraduate year. We subsequently collected clerkship in-training evaluation reports for these graduates. Using a neutral third party and unique codes, an anonymous dataset containing clerkship, residency, and MCCQE Part II performance scores was created for our use. Data were analyzed using descriptive statistics, correlations, receiver operating characteristics, and the Youdin index. Regression was also performed to further study the relationship among the variables. Complete data were available for 78.6% of the graduates. Of these participants, 94% passed the licensing exam on their first attempt. Receiver operating characteristics revealed that the area under the curve for clerkship in-training evaluation reports was 0.67 (p<.05) and 0.66 (p<.05) for residency program directors assessments. Corresponding Youdin indices for in-training evaluation reports and residency program director assessments were 0.30 and 0.23, respectively. Although clerkship in-training evaluation reports and residency program director ratings are significant predictors of pass-fail performance on the MCCQE Part II, the effectiveness of each one to predict pass-fail performance was relatively small. Reasons for these findings are discussed.

  3. Recruitment Early Warning System and Accession Contingency Planning Process. Phase II. Part 1.

    DTIC Science & Technology

    1984-11-01

    RD-A154 613 RECRUITMENT EARLY WARNING SYSTEM AND ACCESSION i/7 CONTINGENCY PLANNING PROCE..(U) ECONOMIC RESEARCH LAB INC RESTON YA L GOLDBERG ET AL...11 TITLE (include Security Classification) Recruitment Early Warning System and Accession Contingency Planning Process Phase II, Part 1 Final Report...GROUP Early Warning System, Forecasting, Manpower Planning LV &V WA&Vm 19. ABSTRACT (Continue on reverse if necessary and identify by block ny.1ber

  4. Alchemical poetry in medieval and early modern Europe: a preliminary survey and synthesis. Part II - Synthesis.

    PubMed

    Kahn, Didier

    2011-03-01

    This article provides a preliminary description of medieval and early modern alchemical poetry composed in Latin and in the principal vernacular languages of western Europe. It aims to distinguish the various genres in which this poetry flourished, and to identify the most representative aspects of each cultural epoch by considering the medieval and early modern periods in turn. Such a distinction (always somewhat artificial) between two broad historical periods may be justified by the appearance of new cultural phenomena that profoundly modified the character of early modern alchemical poetry: the ever-increasing importance of the prisca theologia, the alchemical interpretation of ancient mythology, and the rise of neo-Latin humanist poetry. Although early modern alchemy was marked by the appearance of new doctrines (notably the alchemical spiritus mundi and Paracelsianism), alchemical poetry was only superficially modified by criteria of a scientific nature, which therefore appear to be of lesser importance. This study falls into two parts. Part I provides a descriptive survey of extant poetry, and in Part II the results of the survey are analysed in order to highlight such distinctive features as the function of alchemical poetry, the influence of the book market on its evolution, its doctrinal content, and the question of whether any theory of alchemical poetry ever emerged. Part II is accompanied by an index of the authors and works cited in both parts.

  5. Can focusing on UPDRS Part II make assessments of Parkinson disease progression more efficient?

    PubMed

    Sampaio, Cristina

    2009-03-01

    Harrison et al. have attempted to validate Part II of the Unified Parkinson's Disease Rating Scale (UPDRS II) as a medication-independent measure of disease progression. The authors collected cross-sectional data from a cohort of 888 patients with idiopathic Parkinson disease, and they found a robust association between UPDRS II scores and disease duration. Other variables considered were the patients' levodopa status, age at disease onset, and scores on UPDRS I, II and III. The results suggest that a single UPDRS II measurement might be a good indicator of progression at a given time point, irrespective of the current disease-related circumstances. This concept is attractive in its simplicity and patient-centeredness. However, this evidence came from a single-center, retrospective study, the statistical model was constructed using a nonvalidated surrogate as an independent variable, and no external replication was conducted. Until further confirmation, therefore, Harrison et al.'s proposal can only be considered to be a working hypothesis.

  6. Validity of NBME Parts I and II for the Selection of Residents: The Case of Orthopaedic Surgery.

    ERIC Educational Resources Information Center

    Case, Susan M.

    The predictive validity of scores on the National Board of Medical Examiners (NBME) Part I and Part II examinations for the selection of residents in orthopaedic surgery was investigated. Use of NBME scores has been criticized because of the time lag between taking Part I and entering residency and because Part I content is not directly linked to…

  7. Surface Alteration of Activated Carbon for Detoxification of Copper (ii) from Industrial Effluents

    NASA Astrophysics Data System (ADS)

    Bhutto, Sadaf; Khan, M. Nasiruddin

    2013-04-01

    The low-cost modified activated carbons were prepared from Thar and Lakhra (Pakistan) coals by activation with sulfuric acid and further modified with citric, tartaric and acetic acids for the selective adsorption of Cu(II) from aqueous solution. The original carbon obtained from activated Thar and Lakhra coals at pH 3.0 displayed significant adsorption capacity for lead and insignificant capacity values (0.880 and 0.830 mgṡg-1) for copper. However, after modification with citric, tartaric and acetic acid the copper adsorption capacities enhanced in the range of 5.56-21.85 and 6.05-44.61 times, respectively. The Langmuir, Freundlich and Temkin adsorption isotherms were used to elucidate the observed sorption phenomena. The isotherm equilibrium data was well fitted by the Langmuir and sufficiently fitted to the Freundlich models. The calculated thermodynamic parameters such as change in Gibbs free energy (ΔG°), enthalpy (ΔH°) and entropy (ΔS°) inferred that the investigated adsorption was spontaneous and endothermic in nature. Based on the results, it was concluded that the surface alteration with citric and tartaric acid, Thar and Lakhra activated carbons had significant potential for selective removal of copper(II) from industrial wastewater.

  8. Analysis of industrial contaminants in indoor air. Part 2. Emergent contaminants and pesticides.

    PubMed

    Garcia-Jares, Carmen; Regueiro, Jorge; Barro, Ruth; Dagnac, Thierry; Llompart, Maria

    2009-01-16

    This article reviews recent literature on the analysis of several contaminants related to the industrial development in indoor air in the framework of the REACH project. In this second part, the attention is focused on emergent contaminants and biocides. Among these chemicals, phthalates, polybrominated and phosphate flame retardants, fragrances, pesticides, as well as other emerging pollutants, are increasing their environmental and health concern and are extensively found in indoor air. Some of them are suspected to behave as priority organic pollutants (POPs) and/or endocrine disrupting compounds (EDC), and can be found both in air and associated to the suspended particulate matter (PM) and settled dust. Main literature considered for this review is from the last ten years, reporting analytical developments and applications regarding the considered contaminants in the indoor environment. Sample collection and pretreatment, analyte extraction or desorption, clean-up procedures, determination techniques, and performance results are summarized and discussed.

  9. Respiratory health and fluoride exposure in different parts of the modern primary aluminum industry.

    PubMed

    Radon, K; Nowak, D; Heinrich-Ramm, R; Szadkowski, D

    1999-08-01

    The aim of this cross-sectional study was to investigate possible acute and long-term respiratory health effects of work at different working places in the primary aluminum industry. A cross-sectional study was carried out on 78 potroom workers, 24 foundry workers, and 45 carbon-plant workers (n = 147, exposed group), and 56 control workers (watchmen, craftsmen, office workers, laboratory employees) of a modern German prebake aluminum plant. The survey consisted of pre- and postshift spirometric and urinary fluoride measurements. Potroom workers had significantly lower preshift results with regard to forced vital capacity (FVC, 99. 5% versus the 107.2% predicted; P < 0.05) and peak expiratory flow (PEF, 85.2% versus the 98.4% predicted; P < 0.01) as compared with controls. In a multiple regression model a small but significant negative correlation was found between postshift urinary fluoride concentrations and FVC, FEV(1), and PEF. Across-shift spirometric changes were observed only in FVC among carbon-plant workers (103.0 +/- 13.3% predicted preshift value versus 101.2 +/- 13.6% predicted postshift value; P < 0.05). The results suggest that lung function impairment in the modern primary aluminum industry may be only partly due to fluoride exposure and that working in aluminum carbon plants may cause acute lung function changes.

  10. Associations between air pollution in the industrial and suburban parts of Ostrava city and their use.

    PubMed

    Jirik, Vitezslav; Brezna, Barbara; Machaczka, Ondrej; Honkysova, Sabina; Miturova, Hana; Janout, Vladimir

    2017-08-01

    Selecting the locations and numbers of air quality monitoring stations is challenging as these are expensive to operate. Representative concentrations of pollutants in certain areas are usually determined by measuring. If there are significant correlations with concentrations of other pollutants or with other monitoring sites, however, concentrations could also be computed, partly reducing the costs. The aim of this study is to provide an overview of such possible relationships using data on concentrations of ambient air pollutants obtained in different areas of a larger city. Presented are associations between industrial (IP) and suburban parts (SP) as well as correlations between concentrations of various pollutants at the same site. Results of air pollutant monitoring come from Ostrava, an industrial city in Central Europe with a population of over 300,000. The study showed that certain pollutants were strongly correlated, especially particulate matter (r = 0.940) and ozone (r = 0.923) between the IP and SP. Statistically significant correlations were also found between different pollutants at the same site. The highest correlations were between PM10 and NO2 (r IP = 0.728; r SP = 0.734), NO2 and benzo(a)pyrene (r IP = 0.787; r SP = 0.697), and NO2 and ozone (r IP = -0.706; r SP = -0.686). This could contribute to more cost-effective solutions for air pollution monitoring in cities and their surroundings by using computational models based on the correlations, optimization of the network of monitoring stations, and the best selection of measuring devices.

  11. Subseabed disposal program annual report, January-December 1980. Volume II. Appendices (principal investigator progress reports). Part 1

    SciTech Connect

    Hinga, K.R.

    1981-07-01

    Volume II of the sixth annual report describing the progress and evaluating the status of the Subseabed Disposal Program contains the appendices referred to in Volume I, Summary and Status. Because of the length of Volume II, it has been split into two parts for publication purposes. Part 1 contains Appendices A-Q; Part 2 contains Appendices R-MM. Separate abstracts have been prepared for each appendix for inclusion in the Energy Data Base.

  12. A Lagrangian variational formulation for nonequilibrium thermodynamics. Part II: Continuum systems

    NASA Astrophysics Data System (ADS)

    Gay-Balmaz, François; Yoshimura, Hiroaki

    2017-01-01

    Part I of this paper introduced a Lagrangian variational formulation for nonequilibrium thermodynamics of discrete systems. This variational formulation extends Hamilton's principle to allow the inclusion of irreversible processes in the dynamics. The irreversibility is encoded into a nonlinear nonholonomic constraint given by the expression of entropy production associated to all the irreversible processes involved. In Part II, we develop this formulation for the case of continuum systems by extending the setting of Part I to infinite dimensional nonholonomic Lagrangian systems. The variational formulation is naturally expressed in the material representation, while its spatial version is obtained via a nonholonomic Lagrangian reduction by symmetry. The theory is illustrated with the examples of a viscous heat conducting fluid and its multicomponent extension including chemical reactions and mass transfer.

  13. Market-Based Coordination of Thermostatically Controlled Loads—Part II: Unknown Parameters and Case Studies

    SciTech Connect

    Li, Sen; Zhang, Wei; Lian, Jianming; Kalsi, Karanjit

    2016-03-01

    This two-part paper considers the coordination of a population of Thermostatically Controlled Loads (TCLs) with unknown parameters to achieve group objectives. The problem involves designing the bidding and market clearing strategy to motivate self-interested users to realize efficient energy allocation subject to a peak power constraint. The companion paper (Part I) formulates the problem and proposes a load coordination framework using the mechanism design approach. To address the unknown parameters, Part II of this paper presents a joint state and parameter estimation framework based on the expectation maximization algorithm. The overall framework is then validated using real-world weather data and price data, and is compared with other approaches in terms of aggregated power response. Simulation results indicate that our coordination framework can effectively improve the efficiency of the power grid operations and reduce power congestion at key times.

  14. Three generations of zirconia: 
From veneered to monolithic. Part II.

    PubMed

    Stawarczyk, Bogna; Keul, Christin; Eichberger, Marlis; Figge, David; Edelhoff, Daniel; Lümkemann, Nina

    2017-01-01

    This article presents the historical development of the different generations of zirconia and their range of indications, from veneered to monolithic zirconia restorations. While Part I concentrated on detailed information about the development of zirconia for dental use and the mechanical and optical properties, Part II deals with the resulting guidelines for working with the relevant generations by summarizing the correct cementation procedure. Furthermore, this part also focuses on translucency measurements for better characterization and understanding of the different materials. The results obtained from measuring light transmission and contrast ratio are compared and discussed in detail, with the aid of clinical photographs. Finally, the reader is given practice-relevant recommendations for different areas of clinical use of the zirconia generations along with advice on how to process them appropriately.

  15. Advances in explosives analysis—part II: photon and neutron methods

    DOE PAGES

    Brown, Kathryn E.; Greenfield, Margo T.; McGrane, Shawn D.; ...

    2015-10-07

    The number and capability of explosives detection and analysis methods have increased dramatically since publication of the Analytical and Bioanalytical Chemistry special issue devoted to Explosives Analysis [Moore DS, Goodpaster JV, Anal Bioanal Chem 395:245–246, 2009]. Here we review and critically evaluate the latest (the past five years) important advances in explosives detection, with details of the improvements over previous methods, and suggest possible avenues towards further advances in, e.g., stand-off distance, detection limit, selectivity, and penetration through camouflage or packaging. Our review consists of two parts. Part I discussed methods based on animals, chemicals (including colorimetry, molecularly imprinted polymers,more » electrochemistry, and immunochemistry), ions (both ion-mobility spectrometry and mass spectrometry), and mechanical devices. In Part II, we review methods based on photons, from very energetic photons including X-rays and gamma rays down to the terahertz range, and neutrons.« less

  16. Advances in explosives analysis—part II: photon and neutron methods

    SciTech Connect

    Brown, Kathryn E.; Greenfield, Margo T.; McGrane, Shawn D.; Moore, David S.

    2015-10-07

    The number and capability of explosives detection and analysis methods have increased dramatically since publication of the Analytical and Bioanalytical Chemistry special issue devoted to Explosives Analysis [Moore DS, Goodpaster JV, Anal Bioanal Chem 395:245–246, 2009]. Here we review and critically evaluate the latest (the past five years) important advances in explosives detection, with details of the improvements over previous methods, and suggest possible avenues towards further advances in, e.g., stand-off distance, detection limit, selectivity, and penetration through camouflage or packaging. Our review consists of two parts. Part I discussed methods based on animals, chemicals (including colorimetry, molecularly imprinted polymers, electrochemistry, and immunochemistry), ions (both ion-mobility spectrometry and mass spectrometry), and mechanical devices. In Part II, we review methods based on photons, from very energetic photons including X-rays and gamma rays down to the terahertz range, and neutrons.

  17. A legacy of struggle: the OSHA ergonomics standard and beyond, Part II.

    PubMed

    Delp, Linda; Mojtahedi, Zahra; Sheikh, Hina; Lemus, Jackie

    2014-11-01

    The OSHA ergonomics standard issued in 2000 was repealed within four months through a Congressional resolution that limits future ergonomics rulemaking. This section continues the conversation initiated in Part I, documenting a legacy of struggle for an ergonomics standard through the voices of eight labor, academic, and government key informants. Part I summarized important components of the standard; described the convergence of labor activism, research, and government action that laid the foundation for a standard; and highlighted the debates that characterized the rulemaking process. Part II explores the anti-regulatory political landscape of the 1990s, as well as the key opponents, power dynamics, and legal maneuvers that led to repeal of the standard. This section also describes the impact of the ergonomics struggle beyond the standard itself and ends with a discussion of creative state-level policy initiatives and coalition approaches to prevent work-related musculoskeletal disorders (WMSDs) in today's sociopolitical context.

  18. PREFACE: Part II of the Proceedings of the 25th International Conference on Low Temperature Physics

    NASA Astrophysics Data System (ADS)

    Kes, Peter; Jochemsen, Reyer

    2009-03-01

    This Issue of Journal of Physics: Conference Series forms Part II of the Proceedings of the 25th International Conference on Low Temperature Physics (LT25) held in Amsterdam, The Netherlands, 6-13 August 2008. Part II contains the papers of short oral and poster presentations. In addition, it provides general information about the LT25 conference, such as a Report from the Organizers, an Activity Report to the IUPAP of the C5 Chairs, an overview of Committees, Sponsors and Exhibitors, and some Conference Statistics. Part I of the Proceedings of LT25 is a special issue of Journal of Physics: Condensed Matter. It contains the majority of the special invited lectures, such as the London Prize Lectures, the IUPAP Young Scientist Award Lectures, the Plenary and Half Plenary and Public Lectures, and the Historical Lectures presented at the conference excursion to Leiden. The JPCM LT25 special issue is available for free for a period of one year from publication (Journal of Physics: Condensed Matter). To ensure the high publication standard mandated by Journal of Physics: Condensed Matter and Journal of Physics: Conference Series, every paper was reviewed by at least one referee before it was accepted for publication. The Editors are indebted to many colleagues for invaluable assistance in the preparation and with the reviewing of the 900 papers appearing in Parts I and II of these Proceedings. In particular, we like to thank Carlo Beenakker, Jeroen van den Brink, Hans Brom, Jos de Jongh, Horst Rogalla, and Fons de Waele. Guest Editors Peter Kes and Reijer Jochemsen Leiden University, The Netherlands Conference logo

  19. On waves in gases. Part II: Interaction of sound with magnetic and internal modes

    NASA Astrophysics Data System (ADS)

    Campos, L. M. B. C.

    1987-04-01

    This work completes a two-part review on waves in gases, of which the first part

    [Rev. Mod. Phys. 58, 117 (1986)]
    dealt with the modern aspects of acoustics of jets, turbulence, and ducts; this second part extends the range of topics from sound to magnetic, internal, and (to a lesser extent) inertial waves, thus considering all four restoring forces (pressure, gravity, and Lorentz and Coriolis forces). The motivations for the study of these waves were outlined in the introduction to Part I. Part II reviews the coupling of acoustic, magnetic, and internal waves, in four stages: in Sec. I dispersion relations are used to study the propagation and radiation of magneto-acoustic-gravity-inertial waves in media for which the wave speeds and scattering scales are constant; in Sec. II the case of linear waves in stratified media, with nonuniform propagation velocity, is then discussed by means of special functions, appearing as exact solutions of second-order problems; in Sec. III the study of linear waves with variable propagation speeds is extended to certain classes of higher-order problems including a discussion of cutoff frequencies, critical levels, partition of energy, mode coupling and conversion, etc; in Sec. IV the preceding studies are extended to damped and nonlinear waves, to include dissipation with variable damping scales and large disturbances in media under nonuniform external forces, such as magnetic flux tubes. The conclusion (Sec. V) sums up both parts of the review, in the sense that it deals with all types of waves in fluids; it mentions a few currently controversial topics, points out some directions for future research, and indicates methods available to address these issues.

  20. Jackson's Mill Industrial Arts Curriculum Theory: A Base for Curriculum Derivation. Part 1 of a Two-Part Series.

    ERIC Educational Resources Information Center

    Hales, James A.; Snyder, James F.

    1982-01-01

    Discusses various elements which must be considered in the development of industrial arts curriculum: society and culture, human adaptive systems, the universal systems model, system processes, the role of schooling, and curriculum theory. (CT)

  1. Part I - Viscous evolution of point vortex equilibria Part II - Effects of body elasticity on stability of fish motion

    NASA Astrophysics Data System (ADS)

    Jing, Fangxu

    2011-12-01

    Vortex dynamics and solid-fluid interactions are two of the most important and most studied topics in fluid dynamics for their relevance to a wide range of applications from geophysical flows to locomotion in moving fluids. In this work, we investigate two problems in two parts: Part I studies the viscous evolution of point vortex equilibria; Part II studies the effects of body elasticity on the passive stability of submerged bodies. In Part I, we describe the viscous evolution of point vortex configurations that, in the absence of viscosity, are in a state of fixed or relative equilibrium. In particular, we examine four cases, three of them correspond to relative equilibria in the inviscid point vortex model and one corresponds to a fixed equilibrium. Our goal is to elucidate the dominant transient dynamical features of the flow. A multi-Gaussian "core growing" type of model is typically used in high fidelity numerical simulations, but we propose to implement it as a low-order model for the flow field. We show that all four configurations immediately begin to rotate unsteadily. We then examine in detail the qualitative and quantitative evolution of the structures as they evolve, and for each case show the sequence of topological bifurcations that occur both in a fixed reference frame, and in an appropriately chosen rotating reference frame. Comparisons between the cases help to reveal different features of the viscous evolution for short and intermediate time scales of vortex structures. We examine the dynamical evolution of passive particles in the viscously evolving flows and interpret it in relation to the evolving streamline patterns. Although the low-order multi-Gaussian model does not exactly coincide with the Navier-Stokes solution, the two results show remarkable resemblances in many aspects. In Part II, we examine the effects of body geometry and elasticity on the passive stability of motion in a perfect fluid. Our main motivation is to understand the

  2. Differences between easy- and difficult-to-mill chickpea (Cicer arietinum L.) genotypes. Part II: protein, lipid and mineral composition.

    PubMed

    Wood, Jennifer A; Knights, Edmund J; Campbell, Grant M; Choct, Mingan

    2014-05-01

    Part I introduced the concept of easy- and difficult-to-mill chickpea genotypes, the broad chemical composition of their seed fractions and proposed mechanistic explanations for physical differences consistent with observed variation in milling ease. Part II continues this research by delving deeper into the amino acid, fatty acid and mineral components. No association between fatty acid composition and ease of milling was observed. However, particular amino acids and mineral elements were identified that further support roles of lectins, pectins and mineral-facilitated binding in the adhesion of chickpea seed coat and cotyledons. These differences suggest underlying mechanisms that could be exploited by breeding programmes to improve milling performance. This study shows that the content and composition of amino acids, fatty acids and minerals within different chickpea tissues vary with seed type (desi and kabuli) and within desi genotypes in ways that are consistent with physical explanations of how seed structure and properties relate to milling behaviour. © 2013 Society of Chemical Industry.

  3. How Clean Are Hotel Rooms? Part II: Examining the Concept of Cleanliness Standards.

    PubMed

    Almanza, Barbara A; Kirsch, Katie; Kline, Sheryl Fried; Sirsat, Sujata; Stroia, Olivia; Choi, Jin Kyung; Neal, Jay

    2015-01-01

    Hotel room cleanliness is based on observation and not on microbial assessment even though recent reports suggest that infections may be acquired while staying in hotel rooms. Exploratory research in the first part of the authors' study was conducted to determine if contamination of hotel rooms occurs and whether visual assessments are accurate indicators of hotel room cleanliness. Data suggested the presence of microbial contamination that was not reflective of visual assessments. Unfortunately, no standards exist for interpreting microbiological data and other indicators of cleanliness in hotel rooms. The purpose of the second half of the authors' study was to examine cleanliness standards in other industries to see if they might suggest standards in hotels. Results of the authors' study indicate that standards from other related industries do not provide analogous criteria, but do provide suggestions for further research.

  4. PIC Simulations in Low Energy Part of PIP-II Proton Linac

    SciTech Connect

    Romanov, Gennady

    2014-07-01

    The front end of PIP-II linac is composed of a 30 keV ion source, low energy beam transport line (LEBT), 2.1 MeV radio frequency quadrupole (RFQ), and medium energy beam transport line (MEBT). This configuration is currently being assembled at Fermilab to support a complete systems test. The front end represents the primary technical risk with PIP-II, and so this step will validate the concept and demonstrate that the hardware can meet the specified requirements. SC accelerating cavities right after MEBT require high quality and well defined beam after RFQ to avoid excessive particle losses. In this paper we will present recent progress of beam dynamic study, using CST PIC simulation code, to investigate partial neutralization effect in LEBT, halo and tail formation in RFQ, total emittance growth and beam losses along low energy part of the linac.

  5. PHOTOMETRY OF TYPE II CEPHEID CANDIDATES FROM THE NORTHERN PART OF THE ALL SKY AUTOMATED SURVEY

    SciTech Connect

    Schmidt, Edward G.; Hemen, Brian; Rogalla, Danielle; Thacker-Lynn, Lauren E-mail: bhemen1@bigred.unl.edu E-mail: lthacke1@bigred.unl.edu

    2009-06-15

    We have obtained VR photometry of 282 Cepheid variable star candidates from the northern part of the All Sky Automated Survey (ASAS). These together with data from the ASAS and the Northern Sky Variability Survey (NSVS) were used to redetermine the periods of the stars. We divided the stars into four groups based on location in a plot of mean color, (V-R), versus period. Two of the groups fell within the region of the diagram containing known type II Cepheids and yielded 14 new highly probable type II Cepheids. The properties of the remaining stars in these two groups are discussed but their nature remains uncertain. Unexplained differences exist between the sample of stars studied here and a previous sample drawn from the NSVS by Akerlof et al. This suggests serious biases in the identification of variables in different surveys.

  6. A global view on ARAMIS, a risk assessment methodology for industries in the framework of the SEVESO II directive.

    PubMed

    Salvi, Olivier; Debray, Bruno

    2006-03-31

    The ARAMIS methodology was developed in an European project co-funded in the fifth Framework Programme of the European Commission with the objective to answer the specific requirements of the SEVESO II directive. It offers an alternative to purely deterministic and probabilistic approaches to risk assessment of process plants. It also answers the needs of the various stakeholders interested by the results of the risk assessment for land use or emergency planning, enforcement or, more generally, public decision-making. The methodology is divided into the following major steps: identification of major accident hazards (MIMAH), identification of the safety barriers and assessment of their performances, evaluation of safety management efficiency to barrier reliability, identification of reference accident scenarios (MIRAS), assessment and mapping of the risk severity of reference scenarios and of the vulnerability of the plant surroundings. The methodology was tested during five case studies, which provided useful information about the applicability of the method and, by identifying the most sensitive parts of it opened way to new research activity for an improved industrial safety.

  7. 77 FR 37058 - Draft Guidance for Industry and Food and Drug Administration Staff; Class II Special Controls...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-06-20

    ...] [FR Doc No: 2012-15025] DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA 2012-D-0304] Draft Guidance for Industry and Food and Drug Administration Staff; Class II...: Food and Drug Administration, HHS. ACTION: Notice. SUMMARY: The Food and Drug Administration (FDA)...

  8. REINFORCEMENT IN CLASSROOM LEARNING. PART II, STUDIES OF REINFORCEMENT IN SIMULATED CLASSROOM SITUATIONS. PART III, IDENTIFICATION OF REINFORCERS OF HUMAN BEHAVIOR.

    ERIC Educational Resources Information Center

    TRAVERS, ROBERT M.W.; AND OTHERS

    REINFORCEMENT CONCEPTS DERIVED LARGELY FROM RESEARCH OF SUBHUMAN SUBJECTS WERE TESTED FOR APPLICABILITY TO HUMAN-LEARNING SITUATIONS SIMILAR TO THOSE THAT OCCUR IN SCHOOLS. A SERIES OF EXPLORATORY STUDIES CONDUCTED IS DESCRIBED IN PART II OF THIS REPORT. IN PART III, TWO EXPERIMENTS CONDUCTED TO DETERMINE THE REINFORCING VALUE OF DIFFERENT STIMULI…

  9. Experimental investigation and numerical modeling of carbonation process in reinforced concrete structures Part II. Practical applications

    SciTech Connect

    Saetta, Anna V.; Vitaliani, Renato V

    2005-05-01

    The mathematical-numerical method developed by the authors to predict the corrosion initiation time of reinforced concrete structures due to carbonation process, recalled in Part I of this work, is here applied to some real cases. The final aim is to develop and test a practical method for determining the durability characteristics of existing buildings liable to carbonation, as well as estimating the corrosion initiation time of a building at the design stage. Two industrial sheds with different ages and located in different areas have been analyzed performing both experimental tests and numerical analyses. Finally, a case of carbonation-induced failure in a prestressed r.c. beam is presented.

  10. PA impairment due to HIV infection. Part II: Building a professional support network. Forum.

    PubMed

    Behar, M; Bogstad, J R; Gage, L; James, D A; Mott, J S

    1989-11-01

    Several members of the AAPA's Lesbian and Gay Physician Assistants Caucus who participated in the roundtable PAs and HIV-Antibody Testing: The Need for Guidelines When the Practitioner Is at Risk (1989;13[5]:146-158) met with members of the 12-Step/Caduceus Caucus to begin developing a cooperative effort to assist PAs who test positive for antibodies to the human immunodeficiency virus, and to explore other HIV-associated impairment issues. Part II focuses on concerns of the provider who is HIV-antibody positive as well as ways PA groups can cooperate to raise the profession's conciousness further and recommend guidelines and policy.

  11. A framework for biodynamic feedthrough analysis--part II: validation and application.

    PubMed

    Venrooij, Joost; van Paassen, Marinus M; Mulder, Mark; Abbink, David A; Mulder, Max; van der Helm, Frans C T; Bulthoff, Heinrich H

    2014-09-01

    Biodynamic feedthrough (BDFT) is a complex phenomenon, that has been studied for several decades. However, there is little consensus on how to approach the BDFT problem in terms of definitions, nomenclature, and mathematical descriptions. In this paper, the framework for BDFT analysis, as presented in Part I of this dual publication, is validated and applied. The goal of this framework is twofold. First of all, it provides some common ground between the seemingly large range of different approaches existing in BDFT literature. Secondly, the framework itself allows for gaining new insights into BDFT phenomena. Using recently obtained measurement data, parts of the framework that were not already addressed elsewhere, are validated. As an example of a practical application of the framework, it will be demonstrated how the effects of control device dynamics on BDFT can be understood and accurately predicted. Other ways of employing the framework are illustrated by interpreting the results of three selected studies from the literature using the BDFT framework. The presentation of the BDFT framework is divided into two parts. This paper, Part II, addresses the validation and application of the framework. Part I, which is also published in this journal issue, addresses the theoretical foundations of the framework. The work is presented in two separate papers to allow for a detailed discussion of both the framework's theoretical background and its validation.

  12. Part I: Sound color in the music of Gyorgy Kurtag, Part II: "Leopard's Path," thirteen visions for chamber ensemble

    NASA Astrophysics Data System (ADS)

    Iachimciuc, Igor

    The dissertation is in two parts, a theoretical study and a musical composition. In Part I the music of Gyorgy Kurtag is analyzed from the point of view of sound color. A brief description of what is understood by the term sound color, and various ways of achieving specific coloristic effects, are presented in the Introduction. An examination of Kurtag's approaches to the domain of sound color occupies the chapters that follow. The musical examples that are analyzed are selected from Kurtag's different compositional periods, showing a certain consistency in sound color techniques, the most important of which are already present in the String Quartet, Op. 1. The compositions selected for analysis are written for different ensembles, but regardless of the instrumentation, certain principles of the formation and organization of sound color remain the same. Rather than relying on extended instrumental techniques, Kurtag creates a large variety of sound colors using traditional means such as pitch material, register, density, rhythm, timbral combinations, dynamics, texture, spatial displacement of the instruments, and the overall musical context. Each sound color unit in Kurtag's music is a separate entity, conceived as a complete microcosm. Sound color units can either be juxtaposed as contrasting elements, forming sound color variations, or superimposed, often resulting in a Klangfarbenmelodie effect. Some of the same gestural figures (objets trouves) appear in different compositions, but with significant coloristic modifications. Thus, the principle of sound color variations is not only a strong organizational tool, but also a characteristic stylistic feature of the music of Gyorgy Kurtag. Part II, Leopard's Path (2010), for flute, clarinet, violin, cello, cimbalom, and piano, is an original composition inspired by the painting of Jesse Allen, a San Francisco based artist. The composition is conceived as a cycle of thirteen short movements. Ten of these movements are

  13. Part I. Inviscid, Swirling Flows and Vortex Breakdown. Part II. a Numerical Investigation of the Lundgren Turbulence Model.

    NASA Astrophysics Data System (ADS)

    Buntine, James Douglas

    Part I. A study of the behaviour of an inviscid, swirling fluid is performed. This flow can be described by the Squire-Long equation if the constraints of time -independence and axisymmetry are invoked. The particular case of flow through a diverging pipe is selected and a study is conducted to determine over what range of parameters (both pipe inlet conditions and geometry) does a (unique) solution exist. The work is performed with a view to understanding how the phenomenon of vortex breakdown develops. Experiments and previous numerical studies have indicated that the flow is sensitive to boundary conditions particularly at the pipe inlet. A "quasi-cylindrical" simplification of the Squire-Long equation is compared with the more complete model and shown to be able to account for most of its behaviour. An advantage of this latter representation is the relatively undetailed description of the flow geometry it requires in order to calculate a solution. "Criticality" or the ability of small disturbances to propagate upstream is related to results of the quasi -cylindrical and axisymmetric flow models. This leads to an examination of claims made by researchers such as Benjamin and Hall concerning the interrelationship between "failure" of the quasi-cylindrical model and the occurrence of a "critical" flow state. Other criteria for predicting the onset of vortex breakdown are considered in the context of the model employed, particularly those of Brown & Lopez and Spall, Gatski & Grosch. Part II. Lundgren (1982) developed an analytical model for homogeneous turbulence based on a collection of contracting spiral vortices each embedded in an axisymmetric strain field. Using asymptotic approximations he was able to deduce the Kolmogorov k^{-5/3} behaviour for inertial scales in the turbulence energy spectrum. Pullin & Saffman have enlarged upon his work to make a number of predictions about the behaviour of turbulence described by the model. This work investigates the

  14. Assessing and addressing moral distress and ethical climate Part II: neonatal and pediatric perspectives.

    PubMed

    Sauerland, Jeanie; Marotta, Kathleen; Peinemann, Mary Anne; Berndt, Andrea; Robichaux, Catherine

    2015-01-01

    Moral distress remains a pervasive and, at times, contested concept in nursing and other health care disciplines. Ethical climate, the conditions and practices in which ethical situations are identified, discussed, and decided, has been shown to exacerbate or ameliorate perceptions of moral distress. The purpose of this mixed-methods study was to explore perceptions of moral distress, moral residue, and ethical climate among registered nurses working in an academic medical center. Two versions of the Moral Distress Scale in addition to the Hospital Ethical Climate Survey were used, and participants were invited to respond to 2 open-ended questions. Part I reported the findings among nurses working in adult acute and critical care units. Part II presents the results from nurses working in pediatric/neonatal units. Significant differences in findings between the 2 groups are discussed. Subsequent interventions developed are also presented.

  15. Signal classification using global dynamical models, Part II: SONAR data analysis

    NASA Astrophysics Data System (ADS)

    Kremliovsky, Michael; Kadtke, James

    1996-06-01

    In Part I of this paper, we described a numerical method for nonlinear signal detection and classification which made use of techniques borrowed from dynamical systems theory. Here in Part II of the paper, we will describe an example of data analysis using this method, for data consisting of open ocean acoustic (SONAR) recordings of marine mammal transients, supplied from NUWC sources. The purpose here is two-fold: first to give a more operational description of the technique and provide rules-of-thumb for parameter choices; and second to discuss some new issues raised by the analysis of non-ideal (real-world) data sets. The particular data set considered here is quite non-stationary, relatively noisy, is not clearly localized in the background, and as such provides a difficult challenge for most detection/classification schemes.

  16. Pregnancy in women with renal disease. Part II: specific underlying renal conditions.

    PubMed

    Vidaeff, Alex C; Yeomans, Edward R; Ramin, Susan M

    2008-08-01

    The obstetric outcome in women with kidney disease has improved in recent years due to continuous progress in obstetrics and neonatology, as well as better medical management of hypertension and renal disease. However, every pregnancy in these women remains a high-risk pregnancy. When considering the interaction between renal disease and pregnancy, maternal outcomes are related to the initial level of renal dysfunction more than to the specific underlying disease. With regards to fetal outcomes, though, a distinction may exist between renal dysfunction resulting from primary renal disease and that in which renal involvement is part of a systemic disease. In part II of this review, some specific causes of renal failure affecting pregnancy are considered.

  17. Exploring Cancer Therapeutics with Natural Products from African Medicinal Plants, Part II: Alkaloids, Terpenoids and Flavonoids.

    PubMed

    Nwodo, Justina N; Ibezim, Akachukwu; Simoben, Conrad V; Ntie-Kang, Fidele

    2016-01-01

    Cancer stands as second most common cause of disease-related deaths in humans. Resistance of cancer to chemotherapy remains challenging to both scientists and physicians. Medicinal plants are known to contribute significantly to a large population of Africa, which is to a very large extent linked to folkloric claims which is part of their livelihood. In this review paper, the potential of naturally occurring anti-cancer agents from African flora has been explored, with suggested modes of action, where such data is available. Literature search revealed plant-derived compounds from African flora showing anti-cancer and/or cytotoxic activities, which have been tested in vitro and in vivo. This corresponds to 400 compounds (from mildly active to very active) covering various compound classes. However, in this part II, we only discussed the three major compound classes which are: flavonoids, alkaloids and terpenoids.

  18. Patient variation in veterinary medicine--part II--influence of physiological variables.

    PubMed

    Modric, S; Martinez, M

    2011-06-01

    In veterinary medicine, the characterization of a drug's pharmacokinetic properties is generally based upon data that are derived from studies that employ small groups of young healthy animals, often of a single breed. In Part I of the series, we focused on the potential influence of disease processes, stress, pregnancy and lactation on drug pharmacokinetics. In this Part II of the series, we consider other covariates, such as gender, heritable traits, age, body composition, and circadian rhythms. The impact of these factors with respect to predicting the relationship between dose and drug exposure characteristics within an animal population is illustrated through the use of Monte Carlo simulations. Ultimately, an appreciation of these potential influences will improve the prediction of situations when dose adjustments may be appropriate. © 2010 Blackwell Publishing Ltd.

  19. Transferring diffractive optics from research to commercial applications: Part II - size estimations for selected markets

    NASA Astrophysics Data System (ADS)

    Brunner, Robert

    2014-04-01

    In a series of two contributions, decisive business-related aspects of the current process status to transfer research results on diffractive optical elements (DOEs) into commercial solutions are discussed. In part I, the focus was on the patent landscape. Here, in part II, market estimations concerning DOEs for selected applications are presented, comprising classical spectroscopic gratings, security features on banknotes, DOEs for high-end applications, e.g., for the semiconductor manufacturing market and diffractive intra-ocular lenses. The derived market sizes are referred to the optical elements, itself, rather than to the enabled instruments. The estimated market volumes are mainly addressed to scientifically and technologically oriented optical engineers to serve as a rough classification of the commercial dimensions of DOEs in the different market segments and do not claim to be exhaustive.

  20. Design of site specific radiopharmaceuticals for tumor imaging. (Parts I and II)

    SciTech Connect

    Van Dort, M.E.

    1983-01-01

    Part I. Synthetic methods were developed for the preparation of several iodinated benzoic acid hydrazides as labeling moieties for indirect tagging of carbonyl-containing bio-molecules and potential tumor-imaging agents. Biodistribution studies conducted in mice on the derivatives having the I-125 label ortho to a phenolic OH demonstrated a rapid in vivo deiodination. Part II. The reported high melanin binding affinity of quinoline and other heterocyclic antimalarial drugs led to the development of many analogues of such molecules as potential melanoma-imaging agents. Once such analogue iodochloroquine does exhibit high melanin binding, but has found limited clinical use due to appreciable accumulation in non-target tissues such as the adrenal cortex and inner ear. This project developed a new series of candidate melanoma imaging agents which would be easier to radio-label, could yield higher specific activity product, and which might demonstrate more favorable pharmacokinetic and dosimetric characteristics compared to iodochloroquine.

  1. Investigational drug tracking: phases I-III and NDA submissions--Part II.

    PubMed

    Grant, K L

    1994-10-01

    The author catalogs over 800 investigational drugs/biologicals currently in Phase I, II or III clinical trials or drugs/biologicals submitted to the FDA as new drug applications. Part I of this article appeared in the September issue of Hospital Pharmacy. The list assists in predicting when new drugs will be marketed. The entries include generic/chemical name, investigational drug number, synonyms, trade names, manufacturers, clinical trial status, predicted approval year, indications or drug class, whether the drug has been developed through biotechnology, and references. Entries were gleaned from medical journals, stock market analysis publications, and the Pharmaceutical Manufacturers Association's Medicines in Development Series. The list is alphabetized by the generic/chemical name or investigational drug number and cross-indexed by the trade name and synonyms. The list reflects those drugs which were not FDA approved as of April 15, 1994. Part I concludes with the remaining alphabetical listing by generic/chemical name or investigational drug number.

  2. Signal classification using global dynamical models, Part II: SONAR data analysis

    SciTech Connect

    Kremliovsky, M.; Kadtke, J.

    1996-06-01

    In Part I of this paper, we described a numerical method for nonlinear signal detection and classification which made use of techniques borrowed from dynamical systems theory. Here in Part II of the paper, we will describe an example of data analysis using this method, for data consisting of open ocean acoustic (SONAR) recordings of marine mammal transients, supplied from NUWC sources. The purpose here is two-fold: first to give a more operational description of the technique and provide rules-of-thumb for parameter choices; and second to discuss some new issues raised by the analysis of non-ideal (real-world) data sets. The particular data set considered here is quite non-stationary, relatively noisy, is not clearly localized in the background, and as such provides a difficult challenge for most detection/classification schemes. {copyright} {ital 1996 American Institute of Physics.}

  3. Investigations about Starting Cracks in DC-Casting of 6063-Type Billets Part II: Modelling Results

    NASA Astrophysics Data System (ADS)

    Jensen, E. K.; Schneider, W.

    Influence on starting crack tendency of varying a number of casting parameters has been studied by experiments, Part I (1), and by model calculations, Part II. Both studies point to starting block shape as a most important single factor in controlling starting cracks. By using the thermal model ALSIM-2 in analysing initial experimental results, the variable heat transfer towards the starting block was determined. This made possible a satisfactory model analysis of the starting phase and likewise the formulation of a useful cracking concept. Thus by using calculated and measured liquid pool depth curve in the starting phase of casting as a basis, an effective starting block shape was found. This new shape practically eliminates the starting crack problems in extrusion billets of the AA6063 type alloys.

  4. Caterpillars and moths: Part II. Dermatologic manifestations of encounters with Lepidoptera.

    PubMed

    Hossler, Eric W

    2010-01-01

    Caterpillars and moths (order Lepidoptera) are uncommonly recognized causes of adverse cutaneous reactions, such as localized stings, papular dermatitis, and urticarial wheals. These reactions are typically mild and self-limited; however, in South America, the sting of Lonomia caterpillars can cause a potentially fatal hemorrhagic diathesis related to massive fibrinolysis. In addition, ocular inflammation and prominent arthralgias have been reported to be caused by caterpillar exposures. Therapies for mucocutaneous reactions to Lepidoptera are largely empiric, with the exception of antivenin against Lonomia obliqua envenomation. Part II of this two-part series on caterpillars and moths reviews the varied symptoms caused by Lepidopteran exposures, reviews the differential diagnosis, and discusses appropriate treatment algorithms.

  5. Microarchitectured solid oxide fuel cells with improved energy efficiency (Part II): Fabrication and characterization

    NASA Astrophysics Data System (ADS)

    Yoon, Chan; Liu, Mingfei; Yuan, Dajun; Guo, Rui; Liu, Meilin; Das, Suman

    2015-10-01

    Part I of this study presented a computational model-based approach for enhancing the performance of solid oxide fuel cells (SOFCs) with designed microarchitecture. The performance of such SOFCs was predicted to greatly improve through a systematic computational design and optimization approach. Part II here proves through experimental fabrication and characterization that microarchitectured SOFC performance can be improved as predicted by the model. A real and specific SOFC is chosen, fabricated and characterized to demonstrate the proof-of-concept. Fabrication techniques using sintering and laser ablation are demonstrated. Pore size and geometry are characterized by interferometry-based surface profilometry and scanning electron microscopy. SOFC button cell performance testing including power output performance and electrochemical impedance spectroscopy are performed. The results show that SOFC performance in a microarchitectured cell can be improved over a baseline button cell by 9-17% in current density and by 7-19% in power density.

  6. Bridging the Skills Gap. Working Paper Part I: High Technology Industries.

    ERIC Educational Resources Information Center

    Kaplan, Christine E.

    In this working paper on high technology industries, a few representative industries are studied in detail, while an overview is also given of the group as a whole. The overview, which highlights the findings of selected studies of the unique characteristics of high tech industries, considers such issues as locational factors, occupational and…

  7. Training for Leisure. Flexible Training Packages for Operatives in Leisure-Related Industries. Part 1.

    ERIC Educational Resources Information Center

    Hunt, Merle; Specht, Carolynne

    A project was designed to identify and define training needs at the operative level in the sport, leisure, and recreation industry in the United Kingdom. The industry is attracting increasing attention in further education (FE) as a result of rapid development. The industry, however, is diverse. Provision of FE must be flexible if it is to meet…

  8. Bridging the Skills Gap. Working Paper Part I: High Technology Industries.

    ERIC Educational Resources Information Center

    Kaplan, Christine E.

    In this working paper on high technology industries, a few representative industries are studied in detail, while an overview is also given of the group as a whole. The overview, which highlights the findings of selected studies of the unique characteristics of high tech industries, considers such issues as locational factors, occupational and…

  9. Training for Leisure. Flexible Training Packages for Operatives in Leisure-Related Industries. Part 1.

    ERIC Educational Resources Information Center

    Hunt, Merle; Specht, Carolynne

    A project was designed to identify and define training needs at the operative level in the sport, leisure, and recreation industry in the United Kingdom. The industry is attracting increasing attention in further education (FE) as a result of rapid development. The industry, however, is diverse. Provision of FE must be flexible if it is to meet…

  10. Theory and Implementation of Nuclear Safety System Codes - Part II: System Code Closure Relations, Validation, and Limitations

    SciTech Connect

    Glenn A Roth; Fatih Aydogan

    2014-09-01

    This is Part II of two articles describing the details of thermal-hydraulic sys- tem codes. In this second part of the article series, the system code closure relationships (used to model thermal and mechanical non-equilibrium and the coupling of the phases) for the governing equations are discussed and evaluated. These include several thermal and hydraulic models, such as heat transfer coefficients for various flow regimes, two phase pressure correlations, two phase friction correlations, drag coefficients and interfacial models be- tween the fields. These models are often developed from experimental data. The experiment conditions should be understood to evaluate the efficacy of the closure models. Code verification and validation, including Separate Effects Tests (SETs) and Integral effects tests (IETs) is also assessed. It can be shown from the assessments that the test cases cover a significant section of the system code capabilities, but some of the more advanced reactor designs will push the limits of validation for the codes. Lastly, the limitations of the codes are discussed by considering next generation power plants, such as Small Modular Reactors (SMRs), analyz- ing not only existing nuclear power plants, but also next generation nuclear power plants. The nuclear industry is developing new, innovative reactor designs, such as Small Modular Reactors (SMRs), High-Temperature Gas-cooled Reactors (HTGRs) and others. Sub-types of these reactor designs utilize pebbles, prismatic graphite moderators, helical steam generators, in- novative fuel types, and many other design features that may not be fully analyzed by current system codes. This second part completes the series on the comparison and evaluation of the selected reactor system codes by discussing the closure relations, val- idation and limitations. These two articles indicate areas where the models can be improved to adequately address issues with new reactor design and development.

  11. 40 CFR Table II-1 to Subpart II of... - Emission Factors

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 22 2013-07-01 2013-07-01 false Emission Factors II Table II-1 to Subpart II of Part 98 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) MANDATORY GREENHOUSE GAS REPORTING Industrial Wastewater Treatment Pt. 98, Subpt. II, Table II-1...

  12. 40 CFR Table II-1 to Subpart II of... - Emission Factors

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 21 2014-07-01 2014-07-01 false Emission Factors II Table II-1 to Subpart II of Part 98 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) MANDATORY GREENHOUSE GAS REPORTING Industrial Wastewater Treatment Pt. 98, Subpt. II, Table II-1...

  13. The CCTC Quick-Reacting General War Gaming System (QUICK). Volume IV. Sortie Generation Subsystem. Parts I and II. Program Maintenance Manual. Change 2.

    DTIC Science & Technology

    1980-06-03

    No. Change No. Title Page, Part I 0 215 1 ii 2 216-260 0 iii-viii 2 260.1-260.2 2 ix 0 Title Page, Part II 0 1-1.2 2 ii -iii 2 2 2 iv 1 3 0 v 2 4-b 1 vi...Page ACKNOWLEDGMENT ......................................... ii ABSTRACT .................... ....................... ix 1. GENERAL...260.1 DD Form 1473 ............. . .......... .... .. .............. .. 260.3 Part II 4. PLANOUT MODULE

  14. Seismic risk analysis for General Electric Plutonium Facility, Pleasanton, California. Final report, part II

    SciTech Connect

    Not Available

    1980-06-27

    This report is the second of a two part study addressing the seismic risk or hazard of the special nuclear materials (SNM) facility of the General Electric Vallecitos Nuclear Center at Pleasanton, California. The Part I companion to this report, dated July 31, 1978, presented the seismic hazard at the site that resulted from exposure to earthquakes on the Calaveras, Hayward, San Andreas and, additionally, from smaller unassociated earthquakes that could not be attributed to these specific faults. However, while this study was in progress, certain additional geologic information became available that could be interpreted in terms of the existance of a nearby fault. Although substantial geologic investigations were subsequently deployed, the existance of this postulated fault, called the Verona Fault, remained very controversial. The purpose of the Part II study was to assume the existance of such a capable fault and, under this assumption, to examine the loads that the fault could impose on the SNM facility. This report first reviews the geologic setting with a focus on specifying sufficient geologic parameters to characterize the postulated fault. The report next presents the methodology used to calculate the vibratory ground motion hazard. Because of the complexity of the fault geometry, a slightly different methodology is used here compared to the Part I report. This section ends with the results of the calculation applied to the SNM facility. Finally, the report presents the methodology and results of the rupture hazard calculation.

  15. Experimental Demonstration of Frequency Regulation by Commercial Buildings – Part II: Results and Performance Evaluation

    DOE PAGES

    Vrettos, Evangelos; Kara, Emre Can; MacDonald, Jason; ...

    2016-11-15

    This paper is the second part of a two-part series presenting the results from an experimental demonstration of frequency regulation in a commercial building test facility. We developed relevant building models and designed a hierarchical controller for reserve scheduling, building climate control and frequency regulation in Part I. In Part II, we introduce the communication architecture and experiment settings, and present extensive experimental results under frequency regulation. More specifically, we compute the day-ahead reserve capacity of the test facility under different assumptions and conditions. Furthermore, we demonstrate the ability of model predictive control to satisfy comfort constraints under frequency regulation,more » and show that fan speed control can track the fast-moving RegD signal of the Pennsylvania, Jersey, and Maryland Power Market (PJM) very accurately. In addition, we discuss potential effects of frequency regulation on building operation (e.g., increase in energy consumption, oscillations in supply air temperature, and effect on chiller cycling), and provide suggestions for real-world implementation projects. Our results show that hierarchical control is appropriate for frequency regulation from commercial buildings.« less

  16. Experimental Demonstration of Frequency Regulation by Commercial Buildings – Part II: Results and Performance Evaluation

    SciTech Connect

    Vrettos, Evangelos; Kara, Emre Can; MacDonald, Jason; Andersson, Goran; Callaway, Duncan S.

    2016-11-15

    This paper is the second part of a two-part series presenting the results from an experimental demonstration of frequency regulation in a commercial building test facility. We developed relevant building models and designed a hierarchical controller for reserve scheduling, building climate control and frequency regulation in Part I. In Part II, we introduce the communication architecture and experiment settings, and present extensive experimental results under frequency regulation. More specifically, we compute the day-ahead reserve capacity of the test facility under different assumptions and conditions. Furthermore, we demonstrate the ability of model predictive control to satisfy comfort constraints under frequency regulation, and show that fan speed control can track the fast-moving RegD signal of the Pennsylvania, Jersey, and Maryland Power Market (PJM) very accurately. In addition, we discuss potential effects of frequency regulation on building operation (e.g., increase in energy consumption, oscillations in supply air temperature, and effect on chiller cycling), and provide suggestions for real-world implementation projects. Our results show that hierarchical control is appropriate for frequency regulation from commercial buildings.

  17. Analysis of Radionuclide Releases from the Fukushima Dai-ichi Nuclear Power Plant Accident Part II

    NASA Astrophysics Data System (ADS)

    Achim, Pascal; Monfort, Marguerite; Le Petit, Gilbert; Gross, Philippe; Douysset, Guilhem; Taffary, Thomas; Blanchard, Xavier; Moulin, Christophe

    2014-03-01

    The present part of the publication (Part II) deals with long range dispersion of radionuclides emitted into the atmosphere during the Fukushima Dai-ichi accident that occurred after the March 11, 2011 tsunami. The first part (Part I) is dedicated to the accident features relying on radionuclide detections performed by monitoring stations of the Comprehensive Nuclear Test Ban Treaty Organization network. In this study, the emissions of the three fission products Cs-137, I-131 and Xe-133 are investigated. Regarding Xe-133, the total release is estimated to be of the order of 6 × 1018 Bq emitted during the explosions of units 1, 2 and 3. The total source term estimated gives a fraction of core inventory of about 8 × 1018 Bq at the time of reactors shutdown. This result suggests that at least 80 % of the core inventory has been released into the atmosphere and indicates a broad meltdown of reactor cores. Total atmospheric releases of Cs-137 and I-131 aerosols are estimated to be 1016 and 1017 Bq, respectively. By neglecting gas/particulate conversion phenomena, the total release of I-131 (gas + aerosol) could be estimated to be 4 × 1017 Bq. Atmospheric transport simulations suggest that the main air emissions have occurred during the events of March 14, 2011 (UTC) and that no major release occurred after March 23. The radioactivity emitted into the atmosphere could represent 10 % of the Chernobyl accident releases for I-131 and Cs-137.

  18. Scanning of the internal structure part with laser ultrasonic in aviation industry.

    PubMed

    Swornowski, Pawel J

    2011-01-01

    The detection of internal defects is a major production and safety issue for the newest generations of aircraft. New materials and manufacturing processes in the aircraft industry demand efficient quality assurance in manufacturing and inspection in maintenance. Advanced metallic material processes (titanium) are used or developed for the production of heavily loaded flying components (in fan blade construction). The inspection of these parts mainly made out of titanium (or CFRP) requires the determination of the percentage of bonded grain sizes around 10-30 µm. This is primarily due to the advantages of a high signal-to-noise ratio and good detection sensitivity. In this article, a diagnosing method of the blade interior by means of the laser ultrasonic is presented. Identification of small fatigue cracks presents a challenging problem during nondestructive testing of fatigue-damaged structures. Laser ultrasonic is a technique that uses two laser beams; one with a short pulse for the generation of ultrasound and another with a long pulse or continuous coupled to an optical interferometer for detection. The results of research of the internal blade structure are presented.

  19. An Evaluative Survey Report on ESEA Title II: Fiscal Years 1966-1968. Part I, Analysis and Interpretation. Part II, Tables.

    ERIC Educational Resources Information Center

    Office of Education (DHEW), Washington, DC.

    This report provides benchmark data on the effects that the provision of school library resources, textbooks, and other instructional materials under Title II of the Elementary and Secondary Education Act (ESEA) has had on education in the nation's public and private elementary and secondary schools. The passage of Title II of ESEA set the stage…

  20. Industrial fuel gas plant project. Phase II. Memphis industrial fuel gas plant. Final report. [U-GAS process

    SciTech Connect

    Not Available

    1983-01-01

    The Industrial Fuel Gas Plant produces a nominal 50 billion Btu/day of product gas. The entire IFG production will be sold to MLGW. Under normal conditions, 20% of the output of the plant will be sold by MLGW to the local MAPCO refinery and exchanged for pipeline quality refinery gas. The MAPCO refinery gas will be inserted into the Memphis Natural Gas Distribution System. A portion (normally 10%) of the IFG output of the plant will be diverted to a Credit Generation Unit, owned by MLGW, where the IFG will be upgraded to pipeline quality (950 Btu/SCF). This gas will be inserted into MLGW's Natural Gas Distribution System. The remaining output of the IFG plant (gas with a gross heating value of 300 Btu/SCF) will be sold by MLGW as Industrial Fuel Gas. During periods when the IFG plant is partially or totally off-stream, natural gas from the Memphis Natural Gas Distribution System will be sent to an air mixing unit where the gas will be diluted to a medium Btu content and distributed to the IFG customers. Drawing 2200-1-50-00104 is the plant block flow diagram showing the process sequence and process related support facilities of this industrial plant. Each process unit as well as each process-related support facility is described briefly.