Science.gov

Sample records for industry energy conservation

  1. Industrial Energy Conservation Technology

    SciTech Connect

    Not Available

    1980-01-01

    A separate abstract was prepared for each of the 55 papers presented in this volume, all of which will appear in Energy Research Abstracts (ERA); 18 were selected for Energy Abstracts for Policy Analysis (EAPA). (MCW)

  2. Industrial energy conservation technology

    SciTech Connect

    Schmidt, P.S.; Williams, M.A.

    1980-01-01

    A separate abstract was prepared for each of the 60 papers included in this volume, all of which will appear in Energy Research Abstracts (ERA); 21 were selected for Energy Abstracts for Policy Analysis (EAPA). (MCW)

  3. Effective transfer of industrial energy conservation technologies

    SciTech Connect

    Clement, M.; Vallario, R.W.

    1983-04-01

    Voluntary participation in industrial energy conservation programs resulted in savings of approximately 1 million barrels of oil equivalent per day in the US during 1981. These energy savings accrued largely from the development, introduction, and acceptance by industry of new energy conserving technologies. These new technologies were developed through cost sharing programs between the Department of Energy and private industry. These joint efforts reduced risk to industry, thus making them willing to accept and use these new technologies at an accelerated rate. Examples of several technologies that were used by industry at an accelerated rate are described. These technologies are: textile foam finishing and dyeing, forging furnace modifications, and high-efficiency metallic recuperators.

  4. Conservation in the energy industry

    NASA Technical Reports Server (NTRS)

    1975-01-01

    The basic energy supply and utilization problems faced by the United States were described. Actions which might alleviate the domestic shortfall of petroleum and natural gas are described, analyzed and overall impacts are assessed. Specific actions included are coal gasification, in situ shale oil production, improved oil and gas recovery, importation of liquid natural gas and deregulation of natural gas prices. These actions are weighed against each other as alternate techniques of alleviating or overcoming existing shortfalls.

  5. Conservation in the energy industry

    NASA Technical Reports Server (NTRS)

    1975-01-01

    The basic energy supply and utilization problems faced by the United States were described. Actions which might alleviate the domestic shortfall of petroleum and natural gas are described, analyzed and overall impacts are assessed. Specific actions included are coal gasification, in situ shale oil production, improved oil and gas recovery, importation of liquid natural gas and deregulation of natural gas prices. These actions are weighed against each other as alternate techniques of alleviating or overcoming existing shortfalls.

  6. Summary of current state industrial energy conservation programs

    SciTech Connect

    Anderson, R.W.; Evans, A.R.; Grogan, P.J.

    1980-05-01

    A preliminary study of industrial energy conservation measures initiated by states under the State Energy Conservation Program is presented. Elements, targets, and administration of state programs are briefly examined. As the results of the study indicate, the states perceive the need for Federal assistance in programs to: establish a forum for coordination of state programs and interchange of approaches and program materials; provide to state offices direct technical assistance, including specific program information, training materials and manuals directed toward specific industries, and an energy accounting methodology; promote national industrial energy conservation measures; develop methods for providing financial assistance to companies, especially small business, for incorporating energy conserving measures; devise a plan for coordinating the state energy-related regulatory activities; and disseminate information on Federal programs and regulations that may impact energy-related decisions at the state level and within private industry.

  7. Energy conservation and cost benefits in the dairy processing industry

    SciTech Connect

    1982-01-01

    Guidance is given on measuring energy consumption in the plant and pinpointing areas where energy-conservation activities can return the most favorable economics. General energy-conservation techniques applicable to most or all segments of the dairy processing industry, including the fluid milk segment, are emphasized. These general techniques include waste heat recovery, improvements in electric motor efficiency, added insulation, refrigeration improvements, upgrading of evaporators, and increases in boiler efficiency. Specific examples are given in which these techniques are applied to dairy processing plants. The potential for energy savings by cogeneration of process steam and electricity in the dairy industry is also discussed. Process changes primarily applicable to specific milk products which have resulted in significant energy cost savings at some facilities or which promise significant contributions in the future are examined. A summary checklist of plant housekeeping measures for energy conservation and guidelines for economic evaluation of conservation alternatives are provided. (MHR)

  8. Energy conservation in the textile industry: 10 case histories

    SciTech Connect

    1982-01-01

    Presented are ten case studies of energy conserving technologies that have been implemented by the textile industry. For each case is given: the name and location of the plant and an employee contact, description of products, energy consumption and costs in years before and after the energy conserving technology was implemented, energy savings since the energy conserving technology was implemented, description of investment decision-making process, and description of any institutional and environmental considerations. Measures included are: tandem preparation line, dyebath reuse, bump-and-run (dyebath temperature drifts for the last 85% of the hold time), foam finishing, wastewater heat recovery, wastewater chlorination and reuse, oven exhaust air counterflow, boiler economizer, wood-fired boiler, and solar industrial process heat. Several other energy conserving technologies that were not studied are briefly summarized. (LEW)

  9. The DOE industrial energy conservation program: Research and development in the iron and steel industry

    SciTech Connect

    Not Available

    1987-02-01

    In an effort to maintain a strong and productive industrial base and to reduce reliance on imported energy sources, the US Department of Energy, Office of Industrial Programs, conducts industrial energy conservation research and development activities. To date, the Office of Industrial Programs has supported over two hundred research and development projects covering a wide spectrum of industrial applications. This brochure presents a summary of the Office of Industrial Programs' research and development activities to date for the steel industry. It was prepared to serve as a tool to aid in the transfer of the results of these activities to those interested in Federal Industrial energy conservation activities.

  10. Potential environmental effects of energy conservation measures in northwest industries

    SciTech Connect

    Baechler, M C; Gygi, K F; Hendrickson, P L

    1992-01-01

    The Bonneville Power Administration (Bonneville) has identified 101 plants in the Pacific Northwest that account for 80% of the region's industrial electricity consumption. These plants offer a precise target for a conservation program. PNL determined that most of these 101 plants were represented by 11 major industries. We then reviewed 36 major conservation technologies used in these 11 industrial settings to determine their potential environmental impacts. Energy efficiency technologies designed for industrial use may result in direct or indirect environmental impacts. Effects may result from the production of the conservation measure technology, changes in the working environment due to different energy and material requirements, or changes to waste streams. Industry type, work-place conditions, worker training, and environmental conditions inside and outside the plant are all key variables that may affect environmental outcomes. To address these issues this report has three objectives: Describe potential conservation measures that Bonneville may employ in industrial programs and discuss potential primary impacts. Characterize industrial systems and processes where the measure may be employed and describe general environmental issues associated with each industry type. Review environmental permitting, licensing, and other regulatory actions required for industries and summarize the type of information available from these sources for further analysis.

  11. Energy Conservation in the Food Industry : Terminal Flour Mill.

    SciTech Connect

    United Industries Corporation.

    1985-03-01

    This report presents the results of an energy study that was conducted at Terminal Flour Mill in Portland, Oregon. Terminal Flour Mill is one of five food industry (SIC 20) plants that are being studied. Energy conservation measures (ECM's) are divided into two groups; operation and maintenance (O and M) measures, and equipment modification measures.

  12. Industrial Energy Conservation, Forced Internal Recirculation Burner

    SciTech Connect

    Joseph Rabovitser

    2003-06-19

    The overall objective of this research project is to develop and evaluate an industrial low NOx burner for existing and new gas-fired combustion systems for intermediate temperature (1400 degree to 2000 degree F) industrial heating devices such as watertube boilers and process fluid heaters. A multi-phase effort is being pursued with decision points to determine advisability of continuance. The current contract over Phases II and III of this work. The objectives of each phase are as follows. Phase II - to design, fabricate, and evaluate prototype burners based on the Forced Internal Recirculation (FIR) concept. Phase III - to evaluate the performance of an FIR burner under actual operating conditions in a full-scale field test and establish the performance necessary for subsequent commercialization

  13. Energy Conservation in the Food Industry : Follow-up Report.

    SciTech Connect

    United Industries Corporation.

    1986-06-01

    United Industries Corporation (UIC) conducted an energy analysis at five food processing plants (SIC 20) in the winter of 1984-1985. Tour of plants (Alpac, Carnation, Terminal flour mill, Tree Top) were revisited eighteen months later to determine what energy conservation measures (ECM's) had been or would be implemented. Additionally, the follow-up investigation evaluated the actual energy savings that accrued for the implemented ECM's and recorded the plants' views on the usefulness of the energy analysis.

  14. The role of thermal energy storage in industrial energy conservation

    NASA Technical Reports Server (NTRS)

    Duscha, R. A.; Masica, W. J.

    1979-01-01

    Thermal Energy Storage for Industrial Applications is a major thrust of the Department of Energy's Thermal Energy Storage Program. Utilizing Thermal Energy Storage (TES) with process or reject heat recovery systems is shown to be extremely beneficial for several applications. Recent system studies resulting from contracts awarded by the Department of Energy (DOE) identified four especially significant industries where TES appears attractive - food processing, paper and pulp, iron and steel, and cement. Potential annual fuel savings with large scale implementation of near term TES systems for these industries is over 9,000,000 bbl of oil. This savings is due to recuperation and storage in the food processing industry, direct fuel substitution in the paper and pulp industry and reduction in electric utility peak fuel use through inplant production of electricity from utilization of reject heat in the steel and cement industries.

  15. Advances in energy conservation of China steel industry.

    PubMed

    Sun, Wenqiang; Cai, Jiuju; Ye, Zhu

    2013-01-01

    The course, technical progresses, and achievements of energy conservation of China steel industry (CSI) during 1980-2010 were summarized. Then, the paper adopted e-p method to analyze the variation law and influencing factors of energy consumptions of large- and medium-scale steel plants within different stages. It is pointed out that energy consumption per ton of crude steel has been almost one half lower in these thirty years, with 60% as direct energy conservation owing to the change of process energy consumption and 40% as indirect energy conservation attributed to the adjustment of production structure. Next, the latest research progress of some key common technologies in CSI was introduced. Also, the downtrend of energy consumption per ton of crude steel and the potential energy conservation for CSI during 2011-2025 were forecasted. Finally, it is indicated that the key topic of the next 15 years' research on the energy conservation of CSI is the synergistic operation of material flow and energy flow. It could be achieved by the comprehensive study on energy flow network optimization, such as production, allocation, utilization, recovery, reuse, and resource, according to the energy quantity, quality, and user demand following the first and second laws of thermodynamics.

  16. Advances in Energy Conservation of China Steel Industry

    PubMed Central

    Sun, Wenqiang; Cai, Jiuju; Ye, Zhu

    2013-01-01

    The course, technical progresses, and achievements of energy conservation of China steel industry (CSI) during 1980–2010 were summarized. Then, the paper adopted e-p method to analyze the variation law and influencing factors of energy consumptions of large- and medium-scale steel plants within different stages. It is pointed out that energy consumption per ton of crude steel has been almost one half lower in these thirty years, with 60% as direct energy conservation owing to the change of process energy consumption and 40% as indirect energy conservation attributed to the adjustment of production structure. Next, the latest research progress of some key common technologies in CSI was introduced. Also, the downtrend of energy consumption per ton of crude steel and the potential energy conservation for CSI during 2011–2025 were forecasted. Finally, it is indicated that the key topic of the next 15 years' research on the energy conservation of CSI is the synergistic operation of material flow and energy flow. It could be achieved by the comprehensive study on energy flow network optimization, such as production, allocation, utilization, recovery, reuse, and resource, according to the energy quantity, quality, and user demand following the first and second laws of thermodynamics. PMID:23533344

  17. Energy Conservation Projects to Benefit the Railroad Industry

    SciTech Connect

    Clifford Mirman; Promod Vohra

    2009-12-31

    The Energy Conservation Projects to benefit the railroad industry using the Norfolk Southern Company as a model for the railroad industry has five unique tasks which are in areas of importance within the rail industry, and specifically in the area of energy conservation. The NIU Engineering and Technology research team looked at five significant areas in which research and development work can provide unique solutions to the railroad industry in energy the conservation. (1) Alternate Fuels - An examination of various blends of bio-based diesel fuels for the railroad industry, using Norfolk Southern as a model for the industry. The team determined that bio-diesel fuel is a suitable alternative to using straight diesel fuel, however, the cost and availability across the country varies to a great extent. (2) Utilization of fuel cells for locomotive power systems - While the application of the fuel cell has been successfully demonstrated in the passenger car, this is a very advanced topic for the railroad industry. There are many safety and power issues that the research team examined. (3) Thermal and emission reduction for current large scale diesel engines - The current locomotive system generates large amount of heat through engine cooling and heat dissipation when the traction motors are used to decelerate the train. The research team evaluated thermal management systems to efficiently deal with large thermal loads developed by the operating engines. (4) Use of Composite and Exotic Replacement Materials - Research team redesigned various components using new materials, coatings, and processes to provide the needed protection. Through design, analysis, and testing, new parts that can withstand the hostile environments were developed. (5) Tribology Applications - Identification of tribology issues in the Railroad industry which play a significant role in the improvement of energy usage. Research team analyzed and developed solutions which resulted in friction

  18. Potential for energy conservation in the glass industry

    SciTech Connect

    Garrett-Price, B.A.; Fassbender, A.G.; Bruno, G.A.

    1986-06-01

    While the glass industry (flat glass, container glass, pressed and blown glass, and insulation fiber glass) has reduced its specific energy use (Btu/ton) by almost 30% since 1972, significant potential for further reduction still remains. State-of-the-art technologies are available which could lead to incremental improvements in glass industry energy productivity; however, these technologies must compete for capital with projects undertaken for other reasons (e.g., capacity expansion, equipment rebuild, labor cost reduction, product quality improvement, or compliance with environmental, health or safety regulations). Narrowing profit margins in the large tonnage segments of the glass industry in recent years and the fact that energy costs represent less than 25% of the value added in glass manufacture have combined to impede the widespread adoption of many state-of-the-art conservation technologies. Savings in energy costs alone have not provided the incentive to justify the capital expenditures required to realize the energy savings. Beyond implementation of state-of-the-art technologies, significant potential energy savings could accrue from advanced technologies which represent a radical departure from current glass making technology. Long-term research and development (R and D) programs, which address the technical and economic barriers associated with advanced, energy-conserving technologies, offer the opportunity to realize this energy-saving potential.

  19. Potential for energy conservation in the cement industry

    SciTech Connect

    Garrett-Price, B.A.

    1985-02-01

    This report assesses the potential for energy conservation in the cement industry. Energy consumption per ton of cement decreased 20% between 1972 and 1982. During this same period, the cement industry became heavily dependent on coal and coke as its primary fuel source. Although the energy consumed per ton of cement has declined markedly in the past ten years, the industry still uses more than three and a half times the fuel that is theoretically required to produce a ton of clinker. Improving kiln thermal efficiency offers the greatest opportunity for saving fuel. Improving the efficiency of finish grinding offers the greatest potential for reducing electricity use. Technologies are currently available to the cement industry to reduce its average fuel consumption per ton by product by as much as 40% and its electricity consumption per ton by about 10%. The major impediment to adopting these technologies is the cement industry's lack of capital as a result of low or no profits in recent years.

  20. The Holyoke Industrial Energy Conservation And Development Program

    NASA Astrophysics Data System (ADS)

    Schaufler, Edward R.; Bateman, Robert H.; Connor, Frederick J.

    1982-03-01

    An innovative approach to the development of a model system for comprehensive industrial sector thermographic investigations and inspections will be taken during the winter of 1981-82 in Holyoke, MA. Infrared thermography techniques will be utilized for cost effective identification of building and process heat losses. The Holyoke program provides for a wide range of energy conservation services and will result in the implementation of no-cost, low-cost, and cost-effective capital intensive measures financed through a cooperative effort of government and private funding.

  1. Energy conservation by hyperfiltration: food industry background literature survey

    SciTech Connect

    Not Available

    1980-04-15

    The application of hyperfiltration to selected food product streams and food processing wastewaters for energy conservation was examined. This literature survey had led to the following conclusions: no research has been conducted in the food industry using membranes with hot process streams due to the temperature limitation (< 40/sup 0/C) of the typically studied cellulose acetate membranes; based on the bench-scale research reviewed, concentration of fruit and vegetable juices with membranes appears to be technically feasible; pretreatment and product recovery research was conducted with membranes on citrus peel oil, potato processing and brine wastewaters and wheys. The experiments demonstrated that these applications are feasible; many of the problems that have been identified with membranes are associated with either the suspended solids or the high osmotic pressure and viscosity of many foods; research using dynamic membranes has been conducted with various effluents, at temperatures to approx. 100/sup 0/C, at pressures to 1200 psi and with suspended solids to approx. 2%; and, the dynamic membrane is being prototype tested by NASA for high temperature processing of shower water. The literature review substantiates potential for dynamic membrane on porous stainless tubes to process a number of hot process and effluent streams in the food processing industry. Hot water for recycle and product concentrations are major areas with potential for economic application. The two plants involved in the first phase of the project should be reviewed to identify potential energy conservation applications. As many as possible of the conservation applications should be tested during the screening phase at each site. The most promising applications at each site should be evaluated more intensively to establish engineering estimates of the economics of this technology for the canned fruit and vegetable segment of the food industry.

  2. Assessment of the industrial energy-conservation program. Final report of the Committee on Assessment of the Industrial Energy Conservation Program

    SciTech Connect

    1982-01-01

    Industrial operations in the United States account for some 37% of the nation's consumptions of energy. It has been estimated that this figure will increase to 50% by 1990 unless appropriate industrial energy conservation measures are adopted. However, such measures are difficult to implement in spite of the potential of various existing, emerging, and advanced technologies that can be applied to the problem. Specifically, the application of many industrial energy conservation measures entails high economic, technological, and institutional risks and uncertainties that constrain industries from adopting such measures. Accordingly, in 1975 the federal government started a program designed to mitigate these risks and uncertainties via government-industry partnership arrangements in the interests of national energy conservation. An important element of this program is the Industrial Energy Conservation Program in the Federal Department of Energy (DOE). In June 1980, DOE asked the National Materials Advisory Board, a unit of the National Academy of Sciences-National Research Council, to form a study committee to assess the effectiveness of the Industrial Energy Conservation Program. The committee concluded that federal support embodied in the DOE program, present and planned, is important to conserving additional industrial energy. However, the committee also concluded that the program needs various improvements in project selection and management and in transfer of results to industry. The committee's findings and recommendations and the results of the deliberation of the committee's three panels, a special report on heat and power, and a report on the visit by four members of the committee to Japan are presented.

  3. On Some Aspects of Energy Conservation in Industries

    NASA Astrophysics Data System (ADS)

    Rai, Keerti; Seksena, S. B. L.; Thakur, A. N.

    2016-06-01

    Energy demand has increased continuously due to advancement in technology and living standards of a large section of people resulting in a wide gap between supply and demand. One of the approaches to reduce this gap would be the adoption of measures of energy conservation in general and the efficient use of energy particularly in motor. This paper presents a review of the research activity in the field of efficiency optimization of three-phase induction motor drive. The approach is analyzed and the better option of energy conservation are identified.

  4. RenewableNY - An Industrial Energy Conservation Initiative

    SciTech Connect

    Lubarr, Tzipora

    2009-09-30

    The New York Industrial Retention Network (NYIRN) manages the RenewableNY program to assist industrial companies in New York City to implement energy efficiency projects. RenewableNY provides companies with project management assistance and grants to identify opportunities for energy savings and implement energy efficiency projects. The program helps companies identify energy efficient projects, complete an energy audit, and connect with energy contractors who install renewable energy and energy efficient equipment. It also provides grants to help cover the costs of installation for new systems and equipment. RenewableNY demonstrates that a small grant program that also provides project management assistance can incentivize companies to implement energy efficiency projects that might otherwise be avoided. Estimated savings through RenewableNY include 324,500 kWh saved through efficiency installations, 158 kW of solar energy systems installed, and 945 thm of gas avoided.

  5. Energy conservation: Industry measures. (Latest citations from the NTIS bibliographic database). Published Search

    SciTech Connect

    1997-05-01

    The bibliography contains citations concerning techniques and equipment, and program overviews regarding industrial energy conservation measures. Topics include case histories and energy audits in a variety of industries, financial and investment aspects, and descriptions of specific energy conservation projects undertaken in the United States and abroad. The food, metals, pulp and paper, wood, and textile industries are among the industries discussed. (Contains 50-250 citations and includes a subject term index and title list.) (Copyright NERAC, Inc. 1995)

  6. Energy conservation: Industry. (Latest citations from the NTIS database). Published Search

    SciTech Connect

    Not Available

    1993-05-01

    The bibliography contains citations concerning techniques and equipment, and program overviews regarding industrial energy conservation measures. Topics include case histories and energy audits in a variety of industries, financial and investment aspects, and descriptions of specific energy conservation projects undertaken in the United States and abroad. The food, metals, pulp and paper, wood, and textile industries are among the industries discussed. (Contains a minimum of 248 citations and includes a subject term index and title list.)

  7. Implementation planning for industrial energy conservation: approach and methodology

    SciTech Connect

    Alston, T.G.; Falk, G.; Grogan, P.J.; Katz, D.; Tatar, J.

    1981-01-01

    Details of an industry-specific Conservation Technology Implementation Branch implementation plan is described in detail. CTIB has conducted implementation planning in the steel, pulp/paper, and agriculture/food processing industries, but in FY 1981, CTIB plans to conduct planning for the chemicals, petroleum refining, aluminum, glass, cement, and textile industries. Guidelines are presented for each contractor for each industry toward a common methodology in terms of approach, areas of analysis, assumptions, and reporting. The major parts of the CTIB plan are: an implementation study consisting of technology selection, market demand analysis, and policy analysis, and a plan consisting of a detailed description and schedule of future CTIB actions, followed by a recommended system for monitoring market results when the plan is implemented. (MCW)

  8. 76 FR 37678 - Energy Conservation Program for Consumer Products and Certain Commercial and Industrial Equipment...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-06-28

    ... Certain Commercial and Industrial Equipment: Proposed Determination of Commercial and Industrial Fans... Energy (DOE) proposes to determine that commercial and industrial fans, blowers, and fume hoods meet the... pumps and certain other industrial equipment to conserve the energy resources of the nation. DATES: DOE...

  9. A Learning Package in Energy Conservation for Participants in the Home Building Industry. Final Report.

    ERIC Educational Resources Information Center

    Houston Univ., TX. College of Architecture.

    Presented is the final report for a project designed to develop an experimental learning package for educating participants in the home building industry in energy conservation. The project addresses deficiencies in the present knowledge status of members of the home building industry, effective marketing techniques for energy conserving homes,…

  10. 77 FR 49701 - Energy Conservation Program for Consumer Products and Certain Commercial and Industrial Equipment...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-08-17

    ... to estimating the FFC energy and emission impacts of alternative energy conservation standards levels... / Friday, August 17, 2012 / Rules and Regulations#0;#0; ] DEPARTMENT OF ENERGY 10 CFR Parts 430 and 431 RIN 1904-AC24 Energy Conservation Program for Consumer Products and Certain Commercial and Industrial...

  11. A Study on Energy Conservation in Textile Industry

    NASA Astrophysics Data System (ADS)

    Dhayaneswaran, Y.; Ashokkumar, L.

    2013-03-01

    In textile mill, electricity consumption is in increasing trend, due to modernised machines and continuous usage of the equipments in inefficient operating parameters. The energy cost is around 15 % to 20 % over the production cost and it stands next to raw material cost. Hence now a day's area of focus is towards energy consumption at load end and by optimizing the efficiency of the motor. In this paper, influence of motors and process of optimisation in textile mill on energy conservation is discussed with practical data.

  12. 75 FR 67637 - Energy Conservation Program for Certain Commercial and Industrial Equipment: Framework Document...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-11-03

    ... Part 431 RIN 1904-AC28 Energy Conservation Program for Certain Commercial and Industrial Equipment: Framework Document for Commercial and Industrial Electric Motors AGENCY: Office of Energy Efficiency and... certain commercial and industrial electric motors. The comment period is extended to November 24, 2010...

  13. Energy conservation in the food industry. (Latest citations from Food Science & Technology Abstracts (FSTA)). Published Search

    SciTech Connect

    1995-05-01

    The bibliography contains citations concerning energy conservation methods and systems in the food industry. The general principles of energy savings and future prospects in sugar, dairy, meat, frozen foods, and brewing industries are reviewed. Energy saving estimates and measures in food processing are discussed. (Contains a minimum of 188 citations and includes a subject term index and title list.)

  14. 78 FR 49202 - Energy Conservation Program for Certain Commercial and Industrial Equipment: Proposed...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-08-13

    ...\\ the California Energy Commission (CEC) appliance database,\\9\\ and additional industry and manufacturer... ). \\9\\ See California Energy Commission: Appliance Database (Available at: http://www.appliances.energy...; ] DEPARTMENT OF ENERGY 10 CFR Part 431 RIN 1904-AD01 Energy Conservation Program for Certain Commercial and...

  15. 78 FR 25627 - Energy Conservation Program for Certain Industrial Equipment: Energy Conservation Standards for...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-05-02

    ... of utilities, as well as historical State commercial energy price data from the Energy Information Administration (EIA). This approach calculates energy expenses based on actual energy prices that customers are... Navigator \\14\\ to calculate commercial natural gas prices, and EIA's State Energy Data System (SEDS) \\15\\...

  16. 78 FR 26711 - Energy Conservation Program for Consumer Products and Certain Commercial and Industrial Equipment...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-05-08

    ...; ] DEPARTMENT OF ENERGY 10 CFR Part 430 RIN 1904-AC65 Energy Conservation Program for Consumer Products and Certain Commercial and Industrial Equipment: Test Procedures for Showerheads, Faucets, Water Closets, Urinals and Commercial Prerinse Spray Valves AGENCY: Office of Energy Efficiency and Renewable Energy...

  17. 78 FR 54197 - Energy Efficiency Program for Commercial and Industrial Equipment: Energy Conservation Standards...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-09-03

    ... Equipment: Energy Conservation Standards for Commercial Packaged Boilers AGENCY: Office of Energy Efficiency... collection process to consider amending the energy conservation standards for commercial packaged boilers... Technologies Office, Mailstop EE-2J, Framework Document for Commercial Packaged Boilers, Docket No....

  18. Energy conservation in the primary aluminum and chlor-alkali industries

    SciTech Connect

    Not Available

    1980-10-01

    The primary aluminum and chlor-alkali industries together use nearly 13% of the electrical energy consumed by US industry. As part of its mission to promote energy conservation in basic US industries, the DOE surveys the present technological status of the major electrochemical industries and evaluates promising technological innovations that may lead to reduced energy requirements. This study provides technical and economic analyses in support of a government program of research and development in advanced electrolytic technology. This program is intended to supplement the development efforts directed toward energy savings by private industry. Sections II and III of this report cover aluminum and chlorine production processes only, since these two industries represent over 90% of the electrical energy requirements of all electrolytic industries in the United States. Section IV examines barriers to accelerated research and development by the electrolytic industries, and makes suggestions for government actions to overcome these barriers.

  19. Conserving Electrical Energy in Commerce and Industry. Science and Technology Education in Philippine Society.

    ERIC Educational Resources Information Center

    Philippines Univ., Quezon City. Inst. for Science and Mathematics Education Development.

    This module contains readings which explain the need to conserve electricity and describe how major electric energy users (the industrial and commercial groups) use and conserve electricity. The module also contains 10 self-check questions (with answers) and a list of references. Students completing the module should be able to: (1) compare the…

  20. Conserving Electrical Energy in Commerce and Industry. Science and Technology Education in Philippine Society.

    ERIC Educational Resources Information Center

    Philippines Univ., Quezon City. Inst. for Science and Mathematics Education Development.

    This module contains readings which explain the need to conserve electricity and describe how major electric energy users (the industrial and commercial groups) use and conserve electricity. The module also contains 10 self-check questions (with answers) and a list of references. Students completing the module should be able to: (1) compare the…

  1. 75 FR 62122 - Energy Conservation Program for Certain Industrial Equipment: Publication of the Petition for...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-10-07

    ... of Energy Efficiency and Renewable Energy Energy Conservation Program for Certain Industrial.... The waiver request is specific to the Daikin Altherma air-to-water heat pump with integrated domestic water heating. Through this document, DOE: Solicits comments, data, and information with respect to...

  2. 78 FR 73589 - Energy Conservation Program: Energy Conservation Standards for Commercial and Industrial Electric...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-12-06

    ... information about the capabilities available to webinar participants. DOE will accept comments, data, and..., Annual Energy Outlook (AEO) 2013 data. The estimated cumulative net present value (NPV) of total...

  3. 77 FR 2355 - Energy Conservation Program for Certain Industrial Equipment: Energy Conservation Standards and...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-01-17

    ...- Conditioning, and Water-Heating Equipment; Proposed Rule #0;#0;Federal Register / Vol. 77 , No. 10 / Tuesday... Commercial Heating, Air-Conditioning, and Water-Heating Equipment AGENCY: Office of Energy Efficiency and... standards for several classes of commercial heating, air-conditioning, and water-heating equipment. Pursuant...

  4. 19 CFR 12.50 - Consumer products and industrial equipment subject to energy conservation or labeling standards.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... to energy conservation or labeling standards. 12.50 Section 12.50 Customs Duties U.S. CUSTOMS AND... MERCHANDISE Consumer Products and Industrial Equipment Subject to Energy Conservation Or Labeling Standards § 12.50 Consumer products and industrial equipment subject to energy conservation or labeling...

  5. Energy conservation and technological change as factors in climate change - a pulp and paper industry example

    SciTech Connect

    Koleff, A.M.

    1997-12-31

    The Pulp and Paper Industry in the United States is one of this country`s most energy intensive industries with energy generally being the second or third largest direct operating expense in mill budgets. As such, the industry has long had an effective energy conservation program and has recorded impressive reductions in energy use. It is also one of the two most capital intensive industries in the United States and has a long capital investment cycle, which can be estimated by various techniques at between 20 and 30 years. This paper discusses the estimated impact of the industry`s energy conservation achievements on long term emission reductions of greenhouse gases and will show how technological changes within the industry have impacted past emission reductions and the prospects for continued progress through emerging technologies. The importance to the global competitiveness of the industry of implementing technological change designed to reduce the emission of greenhouse gases within the industry`s normal investment cycle will also be reviewed.

  6. 76 FR 56125 - Energy Conservation Program for Consumer Products and Certain Commercial and Industrial Equipment...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-09-12

    ... Industrial Equipment: Energy Conservation Standards for Direct Heating Equipment AGENCY: Office of Energy... rulemaking for direct heating equipment is extended to October 14, 2011. ] DATES: DOE will accept comments, data, and information regarding the notice of proposed rulemaking for direct heating equipment...

  7. Research and development separation technology: The DOE Industrial Energy Conservation Program

    SciTech Connect

    Not Available

    1987-07-01

    This brochure summarizes the Office of Industrial Programs' RandD efforts in the advancement of separation technology. The purpose of this brochure is to provide interested parties with information on federal industrial energy conservation activities in separation technology. The brochure is comprised of the following sections: Separation Technology, summarizes the current state of separation technology and its uses. Potential Energy Savings, discusses the potential for industrial energy conservation through the implementation of advanced separation processes. Office of Industrial Programs' RandD Efforts in Separation Technology Development, describes the separation RandD projects conducted by IP. RandD Data Base, lists contractor, principal investigator, and location of each separation-related RandD effort sponsored by IP.

  8. Application research on big data in energy conservation and emission reduction of transportation industry

    NASA Astrophysics Data System (ADS)

    Bai, Bingdong; Chen, Jing; Wang, Mei; Yao, Jingjing

    2017-06-01

    In the context of big data age, the energy conservation and emission reduction of transportation is a natural big data industry. The planning, management, decision-making of energy conservation and emission reduction of transportation and other aspects should be supported by the analysis and forecasting of large amounts of data. Now, with the development of information technology, such as intelligent city, sensor road and so on, information collection technology in the direction of the Internet of things gradually become popular. The 3G/4G network transmission technology develop rapidly, and a large number of energy conservation and emission reduction of transportation data is growing into a series with different ways. The government not only should be able to make good use of big data to solve the problem of energy conservation and emission reduction of transportation, but also to explore and use a large amount of data behind the hidden value. Based on the analysis of the basic characteristics and application technology of energy conservation and emission reduction of transportation data, this paper carries out its application research in energy conservation and emission reduction of transportation industry, so as to provide theoretical basis and reference value for low carbon management.

  9. College Industrial Park : An Innovative Approach to Energy Conservation Through the Use of Geothermal Energy.

    SciTech Connect

    Oregon Institute of Technology . Geo-Heat Center; William E. Nork, Inc.

    1986-11-18

    Geothermal effluent from the Oregon Institute of Technology campus and Merle West Medical Center has been discharged to an open drainage ditch adjacent to the City's College Industrial Park since 1964. Over the past few years there has been increasing concern for conservation and preservation of the geothermal aquifers in Klamath Falls, Oregon. An effective way of improving the energy utilization is to cascade the approximately 130/sup 0/F effluent for heating buildings in the industrial park and disposal of the effluent in an existing injection well. An aquifer stress test was performed using the 1500 foot well in the industrial park. Based on the specific capacity, data indicate that the well is capable of accepting an injection rate of at least 700 gpm of the thermal effluent. A plume of degraded water will develop down-gradient of the well. However, the plume is expected to bypass nearby water supply wells and will have no impact on OIT and MWMC space heating wells.

  10. 78 FR 48821 - Energy Conservation Program for Consumer Products and Certain Commercial and Industrial Equipment...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-08-12

    ... submission of comments by August 12, 2013. Thereafter, the Consumer Electronics Association (CEA), on behalf... Part 430 RIN 1904-AD04 Energy Conservation Program for Consumer Products and Certain Commercial and Industrial Equipment: Proposed Determination of Computers as a Covered Consumer Product AGENCY: Office...

  11. Energy conservation: Industry measures. January 1985-September 1991 (Citations from the NTIS Data Base). Rept. for Jan 85-Sep 91

    SciTech Connect

    Not Available

    1991-08-01

    The bibliography contains citations concerning techniques and equipment, and program overviews regarding industrial energy conservation measures. Topics include case histories and energy audits in a variety of industries, financial and investment aspects, and descriptions of specific energy conservation projects undertaken in the United States and abroad. The food, metals, pulp and paper, wood, and textile industries are among the industries discussed. (Contains 196 citations with title list and subject index.)

  12. Exergy analysis on industrial boiler energy conservation and emission evaluation applications

    NASA Astrophysics Data System (ADS)

    Li, Henan

    2017-06-01

    Industrial boiler is one of the most energy-consuming equipments in china, the annual consumption of energy accounts for about one-third of the national energy consumption. Industrial boilers in service at present have several severe problems such as small capacity, low efficiency, high energy consumption and causing severe pollution on environment. In recent years, our country in the big scope, long time serious fog weather, with coal-fired industrial boilers is closely related to the regional characteristics of high strength and low emissions [1]. The energy-efficient and emission-reducing of industry boiler is of great significance to improve China’s energy usage efficiency and environmental protection. Difference in thermal equilibrium theory is widely used in boiler design, exergy analysis method is established on the basis of the first law and second law of thermodynamics, by studying the cycle of the effect of energy conversion and utilization, to analyze its influencing factors, to reveal the exergy loss of location, distribution and size, find out the weak links, and a method of mining system of the boiler energy saving potential. Exergy analysis method is used for layer combustion boiler efficiency and pollutant emission characteristics analysis and evaluation, and can more objectively and accurately the energy conserving potential of the mining system of the boiler, find out the weak link of energy consumption, and improve equipment performance to improve the industrial boiler environmental friendliness.

  13. Moving energy-conserving design into the mainstream of the US buildings industry

    SciTech Connect

    Baccei, B. C.

    1981-04-01

    Two programs discussed that are greatly accelerating the rate at which the US buildings industry is moving towards mass production of energy conserving solar buildings are: the Passive Solar Manufactured Buildings Program and the Solar Home Builders Program in the Denver metropolitan area. These programs provide a useful model for other efforts in accelerating private industry's rate of change. The concepts discussed on which this model is based include: industry participation in planning; incremental change; builders and architects; technical assistance (not money); large volume builders; competitive selection; simplified contractual procedures; public exposure; sensitive, concerned management. Progress of the programs are discussed. (MCW)

  14. Energy Conservation

    ERIC Educational Resources Information Center

    Abelson, Philip H.

    1972-01-01

    Comments on The Potential for Energy Conservation,'' a study by the Office of Emergency Preparedness, emphasizing the coming dependence on foreign oil, and presses for government influence to encourage development of more efficient cars. (AL)

  15. Case history studies of energy conservation improvements in the dairy industry

    SciTech Connect

    Not Available

    1982-06-01

    Presented are ten case histories about energy-efficient technologies implemented by the dairy industry. For each case is presented: the name and location of the company, and its product line; energy consumption and costs at the plant before and after implementation of energy-conserving technology; the factors that prompted the investment; and product quality as a result of the new equipment. The measures presented are: refrigeration compressor replacement, turbulators in boiler tubes, stack exchange on boilers, reverse osmosis, six-effect evaporator, multi-effect evaporator with thermal vapor recompressor, spray dryer heat recovery, efficient compressor operations, mechanical vapor recompression evaporator, preheated spray dryer air with recoverable waste heat. (LEW)

  16. Energy Conservation.

    ERIC Educational Resources Information Center

    Land, Amy A.

    This selection of class activities involves a sequence of 10 class sessions. The goal of the collection is to aid students in learning the concepts of energy conservation and to put this knowledge into practice. Attention is also given to the development of alternate energy sources. Each lesson includes an activity title, motivational hints,…

  17. Energy conservation in distillation

    NASA Astrophysics Data System (ADS)

    Mix, T. W.; Dweck, J. S.; Weinberg, M.; Armstrong, R. C.

    1981-07-01

    An audit of major industrial and processes and key colums in each major process indicated that approximately twoquads of energy were consumed for distillation in the US in 1976. Energy usage by industry is included: petroleum refineries, 66% chemical (including petrochemical) industry, 29% natural gas liquids processing, 5%. Techniques and current practices for conserving distillation energy are reviewed, and guidelines indicating those process conditons which favor the use of each energy conserving technique are enumerated. Expressions for payout time for tray and control retrofit options are developed based on energy savings and increased throughput. Calculations for industrial colums suggested that both types of retrofits would frequently have short (,6 months) payout times based on either criterion. Extractive distillation is also discussed, and criteria enabling the estimation of the energy which may be conserved using this technique are developed. Good housekeeping practices and field techniques for checking the energy efficiency of industrial distillations are also discussed.

  18. 75 FR 51423 - Energy Conservation Program for Consumer Products and Certain Commercial and Industrial Equipment...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-08-20

    ... energy prices reported by manufacturers on appliance Energy Guide labels. DOE is soliciting public...; ] DEPARTMENT OF ENERGY 10 CFR Part 431 RIN 1904-AC24 Energy Conservation Program for Consumer Products and... Adopting Full-Fuel-Cycle Analyses Into Energy Conservation Standards Program AGENCY: Office of Energy...

  19. IEA Energy conservation in the iron and steel industry. [US and Western Europe

    SciTech Connect

    Tunnah, B.G.

    1981-01-01

    The NATO Committee on the Challenges of Modern Society research program, under the auspices of the IEA, had the objectives of collecting data on material requirements and energy-consumption patterns in selected energy-intensive industries in the US and Western Europe, of identifying technologies and operating practices with the potential for energy conservation in those industries, and of recommending research projects that could lead to improved energy efficiency. The steel industry was selected for analysis and ideas for an international cooperative program were developed. Representatives from various countries conducted meetings and the form of an implementing agreement for a research and development program was finalized in December, 1980. The program includes three technical areas: hot-surface inspection, heat recovery, and coal gasification. Hot-surface inspection methods to be demonstrated are: optical, induction, electromagnetic ultrasonic, electromagnetic ultrasonic surface testing methods, and eddy current method for hot surface inspection and an infrared system (possibly). Three heat-recovery projects are: ceramic heat wheel development; demonstration of granular bed/heat pipe system for heat recovery; and demonstration of tubular ceramic recuperators. Processes in coal gasification are: converter process, gas treatment, and iron treatment. Each project is described in detail. (MCW)

  20. Energy Conservation

    SciTech Connect

    Simpson, P.

    1995-06-01

    There are two fundamental reasons or motivations for energy conservation: (1) economics; and (2) consideration of energy - its sources and availability. Economics speaks for itself and needs little explanation: a project is undertaken, the cost is recovered in a given period of time (we hope) and our company realizes cost savings thereafter. We study and propose a project; we estimate the payback. If approved, we implement the project. Then, we eagerly watch for its effectiveness - for the proposed payback. The second consideration in regard to energy conservation might - in the foreseeable future - become by far the most important - that of availability. Very knowledgeable persons have stated that this - in reality - is the most serious problem facing our nation today. Readily available, reasonably priced energy has given to the US the high form of living experienced today. An interruption in this flow could catapult our nation in an awesome catastrophe. The energy shortage of the late 70`s might be a forerunner of such an experience.

  1. Case history studies of energy conservation improvements in the meat industry

    SciTech Connect

    Not Available

    1982-06-01

    Presented are case histories for ten energy-efficient technologies implemented by the meat industry. For each case is presented: the name and location of the plant, name of plant employee contact with address and telephone number, energy consumption and costs at the plant before and after implementation of energy-conserving technology, description of the investment decision process, and changes in production or product quality as a result of the new equipment. The measures presented are: continuous rendering, high-pressure return on the boiler, heat recovery from condensate return and flash steam, continuous whole blood processing, preheating of process water with recovered refrigeration waste heat, continuous rendering of poultry scraps, electrical stimulation of beef, preheating and storing process water with recovered refrigeration waste heat, microcomputer control system, and housekeeping improvements. (LEW)

  2. Developing software for energy conservation in the process industries: two case studies. Capsule report

    SciTech Connect

    None, None

    1980-02-01

    Increases in energy cost occurring simultaneously with greatly decreasing computer costs have opened opportunities for applications of computers for industrial energy conversation. The documentation of savings related to past projects is a useful first step in determining the most attractive future applications of computers. The use of computers in the control of a textile dyehouse and in the drying of citrus pulp and the resulting economic gains and energy conservation in these applications are discussed. The overall impact of the control system in the dyehouse was a 23% increase in production per unit of resource consumed, and a payback period for the control system of less than two years. In the drying operations process reliability and safety improved, fuel consumption decreased and production yield increased. (LCL)

  3. Energy conservation

    SciTech Connect

    Not Available

    1990-05-01

    Under the Warner Amendment, oil overcharge funds are designated for states' use in certain authorized energy conservation and assistance programs. During FY 1982-87 Warner funds accounted for $200 million of the $3.3 billion states received from the oil overcharge escrow account. The $3.3 billion was in addition to the $13.3 billion that the Congress appropriated for the conservation and assistance programs. More than 4 years after their distribution, states had not used all the Warner funds. This report provides the status of all oil overcharge funds; the use of Warner funds and the time it is taking to spend the funds in Arizona, California, and Illinois.

  4. Energy conservation and cost benefits in the meat and poultry processing industry. Technology transfer; a technology applications manual

    SciTech Connect

    Not Available

    1982-01-01

    Auditing energy consumption and pinpointing areas where energy-conservation activities and investments can provide the most favorable economic return are covered. The wide-application energy-conservation techniques applicable in most industries, including the meat and poultry processing industries, are emphasized. Wide-application (often called generic) techniques include waste heat recovery, improvement of electric motor efficiency, added insulation, refrigeration improvements, and increases in boiler efficiencies. Specific examples of the application of these techniques in meat packing and poultry processing plants are cited. Specific processing changes that have already resulted in significant energy cost savings at some meat packing or poultry processing plants are examined. A summary checklist for energy conservation and brief case studies from industry are provided. Information is presented on energy price trends and discusses the analysis of capital investment alternatives.

  5. Compound heat pump gas turbine: an approach to energy conservation for process industries

    SciTech Connect

    Fejer, A.A.

    1980-01-01

    A compound heat pump gas turbine engine is proposed to achieve energy conservation in industrial processes that require cooling or refrigeration as well as electric power and process heat. This novel machine is basically the combination of a reversed cycle Brayton engine driven by a gas tubine, with the two engines having a common compressor. Because of this arrangement, the machine is very compact and should be relatively inexpensive to produce. Also, it can be adapted to a variety of fuels. The thermodynamic cycle and some performance characteristics of the compound engine are presented and the potential of such a machine for a meat packing plant is demonstrated. It was concluded from this study that this engine layout will result in significant reductions in engine cost, compared with systems consisting of separate components for power generation, refrigeration, and process heating. In addition, significant savings in energy consumption may be realized. Furthermore, it appears that engines of this type can be made to meet widely differing specifications as far as the split between process heat refrigeration and shaftpower is concerned. Finally, the engine can be made up of compressors, turbine stages, and heat exchangers of relatively simple design without penalties in economy, because the energy savings are achieved in this type of engine by reduction or complete elimination of waste heat, rather than high efficiencies of engine components. The possible energy savings for the meat packing industry indicate that the compound heat pump gas turbine deserves further study, including its cost, operating expenses, and environmental aspects. (LCL)

  6. 77 FR 72763 - Energy Conservation Program: Certification of Commercial and Industrial HVAC, Refrigeration and...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-12-06

    ... Commercial and Industrial HVAC, Refrigeration and Water Heating Equipment AGENCY: Office of Energy Efficiency... certification regulations for certain commercial and industrial equipment covered under the Energy Policy and... commercial and industrial equipment \\1\\ stated that, for a variety of reasons, they would be unable to meet...

  7. Energy: Conservation, Energy Briefs

    ERIC Educational Resources Information Center

    Nation's Schools and Colleges, 1975

    1975-01-01

    A comprehensive energy conservation program at College of the Holy Cross has saved nearly one-third of the fuel oil and one-fifth of the electricity used at the college; briefs on boilers, lights, design. (Author/MLF)

  8. Energy: Conservation, Energy Briefs

    ERIC Educational Resources Information Center

    Nation's Schools and Colleges, 1975

    1975-01-01

    A comprehensive energy conservation program at College of the Holy Cross has saved nearly one-third of the fuel oil and one-fifth of the electricity used at the college; briefs on boilers, lights, design. (Author/MLF)

  9. 76 FR 51281 - Energy Conservation Program for Consumer Products and Certain Commercial and Industrial Equipment...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-08-18

    ... costs (derived from retail energy prices) paid directly by energy users. As a result of a change to... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF ENERGY 10 CFR Part 431 RIN 1904-AC24 Energy Conservation Program for Consumer Products and Certain Commercial and...

  10. 77 FR 31742 - Energy Conservation Program for Consumer Products and Certain Commercial and Industrial Equipment...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-05-30

    ...In this notice of proposed rulemaking (NOPR), the U.S. Department of Energy (DOE) proposes to update its test procedures for showerheads, faucets, water closets, and urinals. Specifically, DOE proposes to incorporate by reference the American Society of Mechanical Engineers/American National Standards Institute (ASME/ANSI) Standard A112.18.1-2011 test procedure for faucets and showerheads, which would replace the 1996 version currently referenced by DOE in its test procedure. DOE also proposes to incorporate by reference ASME/ANSI Standard A112.19.2-2008 procedure for water closets and urinals, which would replace the 1995 version currently referenced by DOE in its test procedure. These updates fulfill DOE's obligation under the Energy Policy and Conservation Act (EPCA) to review its test procedures for covered products at least once every 7 years and either amend the applicable test procedures or publish a determination in the Federal Register not to amend them. DOE also expects that incorporation of the updated procedures will bring DOE's testing requirements more closely in line with current industry practices, reduce the burden associated with testing and reporting test results for these products, and improve the accuracy of test results. For commercial prerinse spray valves, DOE has preliminarily determined that no changes are needed to the existing DOE test procedure in order to accurately measure the water consumption of these products, and proposes to retain the existing procedure without change. However, since the American Society for Testing and Materials (ASTM) reapproved this standard in 2009 as F2324-03 (2009), DOE is proposing to incorporate by reference this most recent version. This action would also satisfy the EPCA requirement for DOE to review the test procedures for these products at least once every 7 years. This notice also announces a public meeting to receive comments on these proposed amendments to the test procedures.

  11. Energy Conservation: A Workshop for Selected Eastern U.S. Industrial Arts Teacher Educators.

    ERIC Educational Resources Information Center

    Wenig, Robert E., Ed.

    This set of 25 instructional modules was produced by a group of industrial arts teacher educators, local teachers, and supervisors from eastern United States. Topic areas of these modules include: societal implications of the energy situation; awareness of energy terms, supply, and use; assessment of conventional and selected renewable alternative…

  12. Industrial Energy Technology

    SciTech Connect

    Traylor, T.D.; Pitsenbarger, J.

    1995-10-01

    Industrial Energy Technology (IET) is published bimonthly. Each issue of IET presents an article of interest to these in the field; contains abstracts of the most current world literature pertaining to industrial energy efficiency; and announces upcoming meetings, conferences, and symposia in the field of industrial energy conservation. This publication contains the abstracts of Department of Energy (DOE) reports, journal articles, conference papers, patents, theses, and monographs added to the Energy Science and Technology Database during the past two months. Also included are US information obtained through acquisition programs or interagency agreements and international information obtained through the International Energy Agency`s Energy Technology Data Exchange or government-to-government agreements.

  13. Energy-conservation indicators

    SciTech Connect

    Belzer, D.B.

    1982-06-01

    A series of Energy Conservation Indicators were developed for the Department of Energy to assist in the evaluation of current and proposed conservation strategies. As descriptive statistics that signify current conditions and trends related to efficiency of energy use, indicators provide a way of measuring, monitoring, or inferring actual responses by consumers in markets for energy services. Related sets of indicators are presented in some 30 one-page indicator summaries. Indicators are shown graphically, followed by several paragraphs that explain their derivation and highlight key findings. Indicators are classified according to broad end-use sectors: Aggregate (economy), Residential, Commercial, Industrial, and transportation. In most cases annual time series information is presented covering the period 1960 through 1981.

  14. Energy Conservation Curriculum Guide Grades Seven through Twelve. Vocational Education, Industrial Arts Curriculum Guide. Bulletin 1681.

    ERIC Educational Resources Information Center

    Louisiana State Dept. of Education, Baton Rouge. Div. of Vocational Education.

    This curriculum guide provides materials for activities related to energy sources, forms, and uses that can be used in grades 7 through 12 and adapted to social studies, science, home economics, and industrial arts. The time requirement for implementation is 3 to 6 weeks. Three transparencies are first provided for use as study aids. A list of…

  15. Energy conservation and savings in the food industry (citations from Food Science and Technology Abstracts). Report for Jan 1972-Nov 1979

    SciTech Connect

    Hippler, R.R.

    1980-02-01

    The citations cover world-wide literature on conservation and savings in energy use for the food industry. Industries covered are dairies (including milk, cheese, cream, ice cream), breweries, meat industry, food processing plants, food warehouses, bakeries, and sugar factories. Energy savings aspects are alternate energy forms, solar drying and dehydration (including for grains and fruits), energy recycling (waste energy usage), and use of by-products for energy, such as biogas. The articles cover techniques equipment, and design for energy conservation. (Contains 95 abstracts)

  16. Conservation and the industry sector

    NASA Technical Reports Server (NTRS)

    1975-01-01

    The following six highly energy intensive industries were studied as targets of energy conservation opportunity: food and kindred products, paper and allied products, chemicals and allied products, petroleum and coal products, stone, glass and clay products, and primary manufacturing. After studying conservation actions within each industry the actions were grouped under three broad categories: increased combustion efficiency, process improvement, and good housekeeping. Some of the results were: (1) approximately 2.18 quads could be saved in 1980 and 2.57 quads in 1985 by installing cogenerative facilities in 50% of the industries, (2) regenerative air-preheaters could result in a 10-15% increase in furnace efficiency representing a 15-25% fuel savings (2.3 to 3.9 quads in 1980 and 2.7 to 4.5 quads in 1985), (3) several major industries have potential for energy savings by recycling-aluminum (0.2 quads), steel (1 quad), glass (0.006 quads), paper and cement (0.08 quads).

  17. Conservation and the industry sector

    NASA Technical Reports Server (NTRS)

    1975-01-01

    The following six highly energy intensive industries were studied as targets of energy conservation opportunity: food and kindred products, paper and allied products, chemicals and allied products, petroleum and coal products, stone, glass and clay products, and primary manufacturing. After studying conservation actions within each industry the actions were grouped under three broad categories: increased combustion efficiency, process improvement, and good housekeeping. Some of the results were: (1) approximately 2.18 quads could be saved in 1980 and 2.57 quads in 1985 by installing cogenerative facilities in 50% of the industries, (2) regenerative air-preheaters could result in a 10-15% increase in furnace efficiency representing a 15-25% fuel savings (2.3 to 3.9 quads in 1980 and 2.7 to 4.5 quads in 1985), (3) several major industries have potential for energy savings by recycling-aluminum (0.2 quads), steel (1 quad), glass (0.006 quads), paper and cement (0.08 quads).

  18. 77 FR 1649 - Energy Conservation Program for Consumer Products and Certain Commercial and Industrial Equipment...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-01-11

    ...The U.S. Department of Energy (DOE) proposes to determine that Residential Central Air Conditioner Split-System Condensing Units (hereafter referred to as ``Condensing Units'') and Residential Heat Pump Split-System Outdoor Units (hereafter referred to as ``Outdoor Units) qualify as a covered product under Part A of Title III of the Energy Policy and Conservation Act (EPCA), as amended. DOE has determined that Condensing Units and Outdoor Units meet the criteria for covered products because: (1) Classifying products of such type as covered products is necessary or appropriate to carry out the purposes of EPCA, and (2) the average U.S. household energy use for Condensing Units and Outdoor Units are likely to exceed 100 kilowatt-hours (kWh) per year.

  19. Energy conservation technologies

    SciTech Connect

    Courtright, H.A.

    1993-12-31

    The conservation of energy through the efficiency improvement of existing end-uses and the development of new technologies to replace less efficient systems is an important component of the overall effort to reduce greenhouse gases which may contribute to global climate change. Even though uncertainties exist on the degree and causes of global warming, efficiency improvements in end-use applications remain in the best interest of utilities, their customers and society because efficiency improvements not only reduce environmental exposures but also contribute to industrial productivity, business cost reductions and consumer savings in energy costs.

  20. National energy conservation

    NASA Technical Reports Server (NTRS)

    1975-01-01

    A set of energy conservation actions that cut across all sectors of the economy were analyzed so that all actions under consideration be analyzed systematically and as a whole. The actions considered were as follows: (1) roll back the price of newly discovered oil, (2) freeze gasoline production for 3 years at 1972 levels, (3) mandate automobile mileage improvements, (4) require industry to improve energy efficiency, (5) require manufacture of household appliances with greater efficiency, (6) force conversion of many power plants from gas and oil to coal. The results showed that considerable gas and oil would be saved by forcing switches to coal. However, the large scale switch to coal was shown to require greatly increased outputs from many other industries that in turn require more energy. It was estimated that nearly 2.5 quads of additional coal were needed to produce these additional requirements. Also, the indirect requirements would create more jobs.

  1. National energy conservation

    NASA Technical Reports Server (NTRS)

    1975-01-01

    A set of energy conservation actions that cut across all sectors of the economy were analyzed so that all actions under consideration be analyzed systematically and as a whole. The actions considered were as follows: (1) roll back the price of newly discovered oil, (2) freeze gasoline production for 3 years at 1972 levels, (3) mandate automobile mileage improvements, (4) require industry to improve energy efficiency, (5) require manufacture of household appliances with greater efficiency, (6) force conversion of many power plants from gas and oil to coal. The results showed that considerable gas and oil would be saved by forcing switches to coal. However, the large scale switch to coal was shown to require greatly increased outputs from many other industries that in turn require more energy. It was estimated that nearly 2.5 quads of additional coal were needed to produce these additional requirements. Also, the indirect requirements would create more jobs.

  2. Selling energy conservation.

    PubMed

    Hinrichsen, D

    1995-01-01

    This article concerns the Organization of the Petroleum Exporting Countries (OPEC) crisis and its impact on energy efficiency measures in the US. In 1985, when the OPEC collapsed, the US government had avoided the need to construct 350 gigawatts of new electric capacity. The most successful efficiency improvements, especially in household appliances and equipment, lighting and tightened energy efficiency standards in new buildings, resulted from the OPEC event. The real innovation of that time was the change in profit rules for utilities. This revolution and the way some US utilities view energy have not caught on elsewhere. Despite the initiative toward improving energy efficiency in homes, offices and industries, the change has been slow. Partly to blame are the big development banks, which pointed out that short-term conservation and efficiency measures could save at least 15% of the total energy demand without the need for major investment. The benefits of energy conservation was shown during the oil shock when per capita energy consumption fell by 5% in the member states of the Organization of Economic Cooperation and Development, while the per capita gross domestic product grew by a third. There has been a decrease in energy expenditure worldwide, and the scope for further energy savings is enormous, but governments need to recognize and seize the opportunity.

  3. Energy Conservation. CORD Energy Technology Series.

    ERIC Educational Resources Information Center

    Center for Occupational Research and Development, Inc., Waco, TX.

    This course in energy conservation is one of 16 courses in the Energy Conservation-and-Use Technology curriculum. Intended for use in two-year postsecondary technical institutions to prepare technicians for employment, the courses are also useful in industry for updating employees in company-sponsored training programs. Comprised of seven modules,…

  4. 78 FR 66201 - Energy Conservation Program for Consumer Products and Certain Commercial and Industrial Equipment...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-11-04

    ...The U.S. Department of Energy (DOE) proposes to revise its test procedure for residential water heaters and certain commercial water heaters established under the Energy Policy and Conservation Act. This rulemaking will fulfill DOE's statutory obligation for residential and certain commercial water heaters to review its test procedure for covered products and equipment at least once every seven years. In addition, this rulemaking will satisfy DOE's statutory obligation to develop a uniform efficiency descriptor for residential and commercial water heaters. The proposed test method would apply the same efficiency descriptor to all residential and certain commercial water heaters, and it would extend coverage to eliminate certain gaps in the current residential test procedure, update the simulated-use-test draw pattern, and update the water delivery temperature requirement. DOE is also announcing a public meeting to discuss and receive comments on issues presented in this test procedure rulemaking.

  5. Research and development in sensor technology: The DOE industrial energy conservation program

    SciTech Connect

    Not Available

    1987-04-01

    Sensor technology is an important component of modern day process technologies. It lends itself to further research and development with the potential for increased energy efficiency and productivity. Sensors are used by industry in practically every aspect of the production process. The utilization of automatic control systems and the anticipation of increased future applications of computers in production processes have highlighted the importance of research in this area. Recognizing this need, IP has funded a series of targeted projects to develop process-specific sensors as well as sensors for generic applications. This brochure describes, in summary form, the Office of Industrial Programs' research and development (R and D) efforts in the advancement of sensor technology.

  6. 78 FR 8998 - Energy Conservation Program for Consumer Products and Certain Commercial and Industrial Equipment...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-02-07

    ... Industrial Equipment: Proposed Determination of Commercial and Industrial Compressors as Covered Equipment... to the notice of proposed determination, published December 31, 2012, about commercial and industrial... proposed determination that commercial and industrial compressors meet the criteria for covered equipment...

  7. Industrial energy conservation-center-pivot site specific irrigation. Final report, January 1995--December 1996

    SciTech Connect

    McCann, I.R.; King, B.A.; Brady, R.

    1996-12-27

    This project was to aid in the development and commercial transfer of site specific technology to industry and farmers. This report contains the results of data collected during the fall of 1996 on a site near Aberdeen, Idaho. This site was equipped to apply water at variable rates predetermined by a digital control map that resided in a computer controller. The flow rates were then adjusted to maintain desired pressure with an Adjustable Speed Drive. Energy consumption was monitored during implementation of site specific irrigation practices and normal irrigation practices. This final report covers the impact that site specific irrigation has on energy use on a irrigated small grain crop near Aberdeen, Idaho. 3 refs., 20 figs., 1 tab.

  8. Nonlinear models for the adoption and diffusion of innovations for industrial energy conservation.

    PubMed

    Jacobsen, Joseph J; Guastello, Stephen J

    2007-10-01

    Four different theoretical models for explaining the diffusion of innovation were compared for 13 energy-related innovations--the Theory of Planned Behavior, the S-curve for Diffusion of Innovations, the power law distribution, and the cusp catastrophe. The substantive concern was to explore the roles of facilitative and obstructive factors in diffusing industrial and commercial innovations. Participants were 102 industrial plant and facilities managers from sites that were among the top users of electrical energy and natural gas in the United States. They completed a survey that contained measurements of positive attitudes toward innovation, organizational resistance to innovation, and the extent to which they had investigated or adopted each of the target innovations. Seven of the 13 innovations exhibited strong cusp catastrophe models (via nonlinear regression, average R2 = .91) compared to linear alternative models (average R2 = .31) for those innovations; the S-curve for diffusion was regarded as a simplified version of the cusp. One innovation was characterized best by a power law distribution (R2 = .94), and the remaining five were characterized best by a linear model that was based on the Theory of Planned Behavior (R2 = .41). Different underlying dynamics for the various innovations were implied by these results.

  9. Industrial sector energy conservation programs in the People`s Republic of China during the seventh five-year plan (1986--1990)

    SciTech Connect

    Liu Zhiping; Sinton, J.E.; Yang Fuqiang; Levine, M.D.; Ting, M.K.

    1994-09-01

    The impetus at the national level to invest in energy conservation is quite strong and has long been reflected not only in official pronouncements, but also in the investments and organizational activities of the Chinese government. In the early 1980s the central government began a program of direct investments in industrial energy conservation that continues to the present. In addition, concurrently established governmental and quasi-governmental agencies have pursued conservation through administrative and educational measures. In Section 2 of this paper the authors outline the policies and institutions that supported China`s program of energy conservation investments in the Sixth and Seventh Five-Year Plans (FYPs) (1981--1985 and 1986--1990). In Section 3 they describe examples of the types of conservation projects pursued in four industrial subsectors: ferrous metals manufacturing; non-ferrous metals mining and manufacturing; chemicals manufacturing; and building materials manufacturing. Section 4 presents a simple methodology for comparing the costs of energy conservation to those of energy supply. Further discussion points out the applicability and limitations of this methodology to State Planning Commission published statistical material on the overall results of energy conservation investments. Though problematic, such analysis indicates that energy conservation investments were probably substantially cheaper than investments in equivalent energy supply would have been. They end with a discussion of some of the difficulties encountered in carrying out the conservation investment programs.

  10. 76 FR 40285 - Energy Conservation Program for Consumer Products and Certain Commercial and Industrial Equipment...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-07-08

    ..., U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, Building Technologies... Product AGENCY: Office of Energy Efficiency and Renewable Energy, Department of Energy. ACTION: Notice of.... Department of Energy, Building Technologies Program, Mailstop EE-2J, 1000 Independence Avenue, SW...

  11. Hyperfiltration as an energy conservation technique in the food industry. Phase II. Final report

    SciTech Connect

    Not Available

    1984-04-01

    The continued investigation of various membranes and applications of hyperfiltration in the food industry is reported. Tomato juice was the main emphasis of the study since the potential energy savings for the preconcentration of tomato juice is estimated to be about 23 million liters of oil. There were numerous attempts to produce dynamically formed membranes for concentrating tomato juice. Unfortunately a consistent, reliable membrane was not developed. The thin film composite membrane demonstrated good potential in long term testing of hot tomato juice. The membrane gave consistent results and the flux was able to be restored after cleaning. Hot water from a jar washer and evaporator condensate were investigated for recovery potential. Both show very good potential and the positive results indicate a long term test for approximately 6 months is warranted. Since only feasibility tests were performed, the membrane stability over time needs additional investigation. In addition to tomato juice, several other streams were investigated for concentration potential: orange juice, grape juice, fish stickwater. The concentration of byproducts normally discharged from the plant was also investigated. Primarily short term feasibility tests were performed.

  12. Applied fields for energy conservation, water treatment, and industrial applications. Final report

    SciTech Connect

    Reimers, R.S.; Bock, S.F.; White, L.E.

    1986-06-01

    A detailed evaluation was performed on the use of applied fields (nonionizing radiations, ultrasound, magnetic fields, etc.) for industrial waste treatment, wastewater treatment, and disinfection. Other industrial uses of applied fields and biological considerations were also studied. The evaluation was conducted in the following phases: literature review and personal contacts, papers from field and laboratory professionals, and a workshop with contributed papers. (DLC)

  13. 78 FR 48821 - Energy Conservation Program for Consumer Products and Certain Commercial and Industrial Equipment...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-08-12

    ... Servers2013DET0034@ee.doe.gov . Include EERE- 2013-BT-DET-0034 and/or RIN 1904-AD03 in the subject line of the message. Mail: Ms. Brenda Edwards, U.S. Department of Energy, Building Technologies Program, Mailstop EE.... Department of Energy, Office of Energy Efficiency and Renewable Energy, Building Technologies Program, EE-2J...

  14. 75 FR 22031 - Energy Conservation Program for Consumer Products and Certain Commercial and Industrial Equipment...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-04-27

    ... the electromagnetic (magnetic) type. The industry-accepted life of magnetic ballasts is 50,000 hours... most efficient broad spectrum (``white light'') HID technology, and has a higher first cost than MV...

  15. Evaluation of energy-conservation technologies for the citrus-processing industry

    SciTech Connect

    Not Available

    1980-01-01

    The following manual chapters are outlined and described: overview, boilers, juice evaporators, feed mills, refrigeration, additional energy savings potentials, emerging technologies, optimization of integrated plant energy systems, and economics. (MHR)

  16. Energy Conservation Simplified

    ERIC Educational Resources Information Center

    Hecht, Eugene

    2008-01-01

    The standard formulation of energy conservation involves the subsidiary ideas of kinetic energy ("KE"), work ("W"), thermal energy, internal energy, and a half-dozen different kinds of potential energy ("PE"): elastic, chemical, nuclear, gravitational, and so forth. These quantities came to be recognized during the centuries over which the…

  17. Energy Conservation Simplified

    ERIC Educational Resources Information Center

    Hecht, Eugene

    2008-01-01

    The standard formulation of energy conservation involves the subsidiary ideas of kinetic energy ("KE"), work ("W"), thermal energy, internal energy, and a half-dozen different kinds of potential energy ("PE"): elastic, chemical, nuclear, gravitational, and so forth. These quantities came to be recognized during the centuries over which the…

  18. Commitment and energy conservation

    SciTech Connect

    Pallak, M.S.; Cook, D.A.; Sullivan, J.J.

    1980-01-01

    The authors discuss the process of becoming committed to energy conservation research, then describe practical issues of field research and several data sets on household energy conservation. Their results show that taking a stand affected behavior in reducing the levels of natural gas and electricity usage, with the effect continuing even after the study ended. Although based on the assumption that homeowners were initially favorable toward energy conservation, the studies suggest that energy-related behavior is malleable and amenable to approaches familiar to psychologists. The study indicates that feedback on energy use during peak seasons could help to avoid power shortages. 16 references, 6 tables.

  19. Energy conservation in infants.

    PubMed

    Blass, Elliott

    2015-08-01

    Energy acquisition through suckling has been widely studied in rat and human infants. Processes mediating energy conservation, however, have not received the attention that they deserve. This essay, in honor of Professor Jerry Hogan, discusses parallel behaviors used by rat and human mothers to minimize energy loss in their offspring. Parallel mechanisms underlying energy preservation have been identified in rats and humans, suggesting phylogenetic conservation and possibly continuity. This article is part of a Special Issue entitled: In Honor of Jerry Hogan.

  20. Home Energy Conservation Primer.

    ERIC Educational Resources Information Center

    DeLuca, V. William; And Others

    This guide was prepared to support a program of training for community specialists in contemporary and practical techniques of home energy conservation. It is designed to assist professionals in efficient operation of energy conservation programs and to provide ideas for expanding education operations. Eight major sections are presented: (1)…

  1. Home Energy Conservation Primer.

    ERIC Educational Resources Information Center

    DeLuca, V. William; And Others

    This guide was prepared to support a program of training for community specialists in contemporary and practical techniques of home energy conservation. It is designed to assist professionals in efficient operation of energy conservation programs and to provide ideas for expanding education operations. Eight major sections are presented: (1)…

  2. Energy Conservation Simplified

    NASA Astrophysics Data System (ADS)

    Hecht, Eugene

    2008-02-01

    The standard formulation of energy conservation involves the subsidiary ideas of kinetic energy (KE), work (W), thermal energy, internal energy, and a half-dozen different kinds of potential energy (PE): elastic, chemical, nuclear, gravitational, and so forth. These quantities came to be recognized during the centuries over which the principle developed. The final conservation law, although rich in specificity, is fairly involved. More significantly, it obscures a fundamental underlying simplicity, which could only be appreciated post-relativity (1905). Energy is the scalar measure of physical change. Using the special theory it will be shown that there are only two all-encompassing classifications of energy—energy of rest and energy of motion—and that we can apply the idea of conservation of energy to all physical processes using only these two energy types as quantified by mass and KE.

  3. 78 FR 41868 - Energy Conservation Program for Consumer Products and Certain Commercial and Industrial Equipment...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-07-12

    ... enables secondary energy savings from space cooling, ventilation, and uninterruptible power supplies. \\2.... Estimating the Energy Use and Efficiency Potential of U.S. Data Centers. Proceedings of the IEEE 99 (8), 1440... the distribution of power and responsibilities among the various levels of government. EPCA...

  4. 77 FR 35299 - Energy Conservation Program for Consumer Products and Certain Commercial and Industrial Equipment...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-06-13

    ... Nation because they mitigate environmental impacts by lowering carbon emissions from fossil fuel resources through enabling greater penetration and utilization of renewable energy assets, facilitating more... use of renewable energy resources and reduced emissions from fossil fuels, it is not apparent that...

  5. 76 FR 34685 - Energy Conservation Program for Certain Commercial and Industrial Equipment: Decision and Order...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-06-14

    ...) above with cooling capacities above 300,000 Btu/h according to the test procedures for central air... of Energy Commercial Package Air Conditioner and Heat Pump Test Procedures AGENCY: Office of Energy... package air-source central air conditioners and heat pumps. The waiver is specific to the Daikin VRV...

  6. 78 FR 41873 - Energy Conservation Program for Consumer Products and Certain Commercial and Industrial Equipment...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-07-12

    ... Annual CE Ownership and Market Potential Study. B. Average Household Energy Use DOE calculated average... standards, DOE is required to publish a NOPR. The NOPR provides DOE's proposal for potential energy... describes the details of DOE's analysis of both the burdens and benefits of potential standards, pursuant to...

  7. Energy Conservation through Architectural Design

    ERIC Educational Resources Information Center

    Thomson, Robert C., Jr.

    1977-01-01

    Describes a teaching unit designed to create in students an awareness of and an appreciation for the possibilities for energy conservation as they relate to architecture. It is noted that the unit can be adapted for use in many industrial programs and with different teaching methods due to the variety of activities that can be used. (Editor/TA)

  8. 76 FR 77914 - Energy Conservation Program for Certain Commercial and Industrial Equipment: Test Procedures for...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-12-15

    ... 40 percent and 70 percent of rated lamp lifetime. Correlated color temperature (CCT) and color... Correlated Color Temperature and Color Rendering Index E. Standby Mode and Off Mode Energy Usage F. Effective.... \\1\\ A lumen is a unit of light output weighted to the spectral response of the human eye. \\2\\ One...

  9. 76 FR 31951 - Energy Conservation Program for Certain Commercial and Industrial Equipment: Decision and Order...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-06-02

    ...-source central air conditioners and heat pumps. The waiver is specific to the Carrier Super Modular Multi... below. The cooling capacities of Carrier's SMMSi VRF multi-split heat pumps at issue in the waiver... energy efficiency of those products. The cooling capacities of Carrier's SMMSi VRF multi-split heat pumps...

  10. 76 FR 19759 - Energy Conservation Program for Certain Industrial Equipment: Publication of the Petition for...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-04-08

    ... Waiver From the Department of Energy Commercial Package Air Conditioner and Heat Pump Test Procedures...) test procedure applicable to commercial package air-source central air conditioners and heat pumps. The... existing DOE test procedure for the subject commercial multi- split air conditioners and heat pumps....

  11. 76 FR 19078 - Energy Conservation Program for Certain Industrial Equipment: Publication of the Petition for...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-04-06

    ... under Table 1 of 10 CFR 431.96, which incorporates by reference the Air-Conditioning and Refrigeration... Granting of the Interim Waiver From the Department of Energy Commercial Package Air Conditioner and Heat... air-source central air conditioners and heat pumps. The petition is specific to additional...

  12. 76 FR 31946 - Energy Conservation Program for Certain Industrial Equipment: Publication of the Petition for...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-06-02

    ... Waiver From the Department of Energy Commercial Package Air Conditioner and Heat Pump Test Procedures... (DOE) test procedure applicable to commercial package air-source central air conditioners and heat... DOE test procedure for the subject commercial multi-split air conditioners and heat pumps. DATES:...

  13. 78 FR 40403 - Energy Conservation Program for Consumer Products and Certain Commercial and Industrial Equipment...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-07-05

    ... ``Department'') has determined tentatively that portable air conditioners (ACs) qualify as a covered product... determined that portable ACs meet the criteria for covered products because classifying products of such type....S. household energy use for portable ACs is likely to exceed 100 kilowatt-hours (kWh) per...

  14. Energy conservation potential of surface modification technologies

    SciTech Connect

    Le, H.K.; Horne, D.M.; Silberglitt, R.S.

    1985-09-01

    This report assesses the energy conservation impact of surface modification technologies on the metalworking industries. The energy conservation impact of surface modification technologies on the metalworking industries is assessed by estimating their friction and wear tribological sinks and the subsequent reduction in these sinks when surface modified tools are used. Ion implantation, coatings, and laser and electron beam surface modifications are considered.

  15. Energy-conservation-investment decision making in developing countries: A review of project implementation in industry. Final report

    SciTech Connect

    Not Available

    1989-12-01

    Despite recent efforts in a number of developing countries to promote energy conservation (EC) and efficiency, only a fraction of EC potential has been captured, especially for projects that require significant investments. The document analyzes EC efforts in 11 countries where energy audit and/or feasibility study programs have been carried out (Bangladesh, Costa Rica, Ecuador, El Salvador, Guatemala, Honduras, Jordan, Pakistan, Panama, the Philippines, and Sri Lanka), covering some 1,500 EC projects involving 242 industrial companies. Cost and length of payback seem to be the determining factors for companies considering EC measures; no-cost or low-cost projects with paybacks of less than a year (such as power factor improvement projects) had the highest rate of implementation, while expensive, complicated projects (e.g., cogeneration or fuel substitution projects) were most often rejected. The document concludes, however, that the rate of implementation of EC programs has been quite high, and recommends that inexpensive, short-term projects be featured in future EC programs and increased levels of TA and financial assistance be made available to companies implementing long-term EC measures.

  16. Designing for Energy Conservation.

    ERIC Educational Resources Information Center

    Estes, R. C.

    1979-01-01

    Alief Independent School District, Texas, has been successful in obtaining energy efficient designs for its new schools by developing energy goals prior to the selection of architects and engineers. Features of four projects designed to conserve energy are described. (Author/MLF)

  17. Foundry energy conservation workbook

    SciTech Connect

    1990-10-01

    This report discusses methods for promoting energy conservation in foundries. Use of electric power, natural gas, and coke are evaluated. Waste heat recovery systems are considered. Energy consumption in the specific processes of electric melting, natural gas melting, heat treatments, ladle melting, and coke fuel melting is described. An example energy analysis is included. (GHH)

  18. Foundry energy conservation workbook

    SciTech Connect

    Not Available

    1990-12-31

    This report discusses methods for promoting energy conservation in foundries. Use of electric power, natural gas, and coke are evaluated. Waste heat recovery systems are considered. Energy consumption in the specific processes of electric melting, natural gas melting, heat treatments, ladle melting, and coke fuel melting is described. An example energy analysis is included. (GHH)

  19. Energy Industry

    DTIC Science & Technology

    2007-01-01

    Biomass energy includes the burning of products such as wood, methanol, sludge, railroad ties, and agricultural waste, to produce heat, steam and... energy . Recent political will elevated the development of biomass fuels to the top of the President’s political agenda. In his 2007 State of the...Union Address, President Bush set an ambitious goal for the nation to draw 20% of its energy needs from the use of ethanol, a biomass derived fuel

  20. 78 FR 62970 - Energy Conservation Program for Consumer Products and Certain Commercial and Industrial Equipment...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-10-23

    ...On May 30, 2012, the U.S. Department of Energy (DOE) issued a notice of proposed rulemaking (NOPR) to amend the test procedures for showerheads, faucets, water closets, urinals, and prerinse spray valves. Following consideration of comments received in response to the NOPR, DOE issued a supplemental notice of proposed rulemaking (SNOPR) on April 8, 2013. The SNOPR included revisions to the definitions of showerhead and hand-held showerhead; removal of body sprays from the proposed showerhead definition; requirements pertaining to testing of showerheads that are components of shower towers; a standardized test method to be used when verifying the mechanical retention of a showerhead flow control insert when subject to 8 pounds force (lbf); clarification of permissible trim adjustments for tank-type water closets; amendments to the required static test pressures to be used when testing flushometer valve siphonic and blowout water closets; and clarifications of the definition of basic model with respect to flushometer valve water closets and urinals, as well as associated changes to certification reporting requirements for both of these products. These proposed rulemakings serve as the basis for this action.

  1. Foundry energy conservation workbook

    SciTech Connect

    Not Available

    1990-01-01

    The foundry industry is a significant user of energy, and therefore, a natural candidate for efforts to save energy and improve efficiency by both governmental agencies and technical/trade associations. These efforts are designed to both improve the national energy position and improve the industry's efficiency and profitability. Increased energy cost and the reduced availability of fossil fuels at certain times have provided the incentive to curb waste and to utilize purchased energy wisely. Energy costs now approach and sometimes exceed 10% of the sales dollar of many foundries. Although energy use by foundries has gradually decreased on a per/ton basis in recent years, the foundry industry must continue to find ways to utilize energy more efficiently. This workbook provides ways to achieve this goal.

  2. Energy audit of three energy-conserving devices in a steel-industry demonstration program. Task I. Hague forge furnaces. Final report

    SciTech Connect

    Lownie, H.W.; Holden, F.C.

    1982-06-01

    A program to demonstrate to industry the benefits of installing particular types of energy-conserving devices and equipment was carried out. One of these types of equipment and the results obtained under production conditions in commercial plants are described. The equipment under consideration includes improved forge furnaces and associated heat-recovery components. They are used to heat steel to about 2300 F prior to hot forging. The energy-conserving devices include improved insulation, automatic air-fuel ratio control, and a ceramic recuperator that recovers heat from hot combustion gases and delivers preheated air to high-temperature recirculating burners. Twelve Hague furnaces and retrofit packages were purchased and installed by eleven host forge shops that agree to furnish performance data for the purpose of demonstrating the energy and economic savings that can be achieved in comparison with existing equipment. Fuel savings were reported by comparing the specific energy consumption (Btu's per pound of steel heated) for each Hague furnace with that of a comparison furnace. Economic comparisons were made using payback period based on annual after-tax cash flow. Payback periods for the Hague equipment varied from less than two years to five years or more. In several cases, payback times were high only because the units were operated at a small fraction of their available capacity.

  3. Energy Conservation in GTR

    NASA Astrophysics Data System (ADS)

    Hoefer, Carl

    The topics of gravitational field energy and energy-momentum conservation in General Relativity theory have been unjustly neglected by philosophers. If the gravitational field in space free of ordinary matter, as represented by the metric g ab itself, can be said to carry genuine energy and momentum, this is a powerful argument for adopting the substantivalist view of spacetime. This paper explores the standard textbook account of gravitational field energy and argues that (a) so-called stress-energy of the gravitational field is well-defined neither locally nor globally; and (b) there is no general principle of energy-momentum conservation to be found in General Relativity. I discuss the nature and justification of the zero-divergence law for ordinary stress-energy, and its possible connection with the failure of General Relativity to realise Mach's principle.

  4. Multi-Megawatt Organic Rankine Engine power plant (MORE). Phase 1A: System design of MORE power plant for industrial energy conservation emphasizing the cement industry

    NASA Astrophysics Data System (ADS)

    Bair, E. K.; Breindel, B.; Collamore, F. N.; Hodgson, J. N.; Olson, G. K.

    1980-01-01

    The Multi-Megawatt Organic Rankine Engine (MORE) program is directed towards the development of a large, organic Rankine power plant for energy conservation from moderate temperature industrial heat streams. Organic Rankine power plants are ideally suited for use with heat sources in the temperature range below 1100 F. Cement manufacture was selected as the prototype industry for the MORE system because of the range of parameters which can be tested in a cement application. This includes process exit temperatures of 650 F to 1110 F for suspension preheater and long dry kilns, severe, dust loading, multi-metawatt power generation potential, and boiler exhaust gas acid dew point variations. The work performed during the Phase 1A System Design contract period is described. The System Design task defines the complete MORE system and its installation to the level necessary to obtain detailed performance maps, equipment specifications, planning of supporting experiments, and credible construction and hardware cost estimates. The MORE power plant design is based upon installation in the Black Mountain Quarry Cement Plant near Victorville, California.

  5. Energy conservation resource directory

    SciTech Connect

    Silver, D.; Paddock, D.; Doyle, L.

    1982-05-01

    Listed are energy conservation contacts among governments, local entities, and utilities serving the state of Washington. Statewide organizations and contacts are given, followed by lists for each county, including energy contacts for cities, community action agencies, the council of government, the county, Indian tribes, and utilities serving that county. Whenever possible, program staff people are identified rather than the executive staff. (LEW)

  6. Forget energy conservation - think energy efficiency

    SciTech Connect

    Decker, D.A.

    1996-12-31

    {open_quotes}CONSERVE ENERGY: Please Turn Off The Lights!{close_quotes} Many buildings constructed before 1975 have the peeling remains of those green or orange stickers on light switches. They are the remnants of a U.S. energy policy gone bad. Twenty years ago, energy conservation meant telling employees to wear sweaters to work and applying stickers to remind people to turn off the lights. Neither worked. People who see those old stickers probably don`t know that a quiet revolution has taken place inside thousands of public and commercial buildings. Thanks to new technology and a new attitude about energy, you can forget sweaters and switches. For example... (1) Motion sensors automatically turn off fights when you leave the room. (2) Computers determine when energy rates go down to get the best value. (3) Personal environmental modules let office workers set their cubicle`s heating and lighting levels. These days, energy efficiency is equated with good business. It can increase productivity, create jobs, and reduce pollution -- all with very little effort. That`s why it`s called energy efficiency, not energy conservation. And energy efficiency is good government. If Congress truly is committed to lowering taxes and reducing the budget deficit, members should first look at ways to lower the nation`s energy bill through energy efficiency. It is in the best interests of the energy efficiency industry to work together and promote these benefits.

  7. Motor Energy Conservation Measures

    SciTech Connect

    Ian Metzger, Jesse Dean

    2010-12-31

    This software requires inputs of simple motor inventory information and calculates the energy and cost benefits of various retrofit opportunities. This tool includes energy conservation measures for: High Efficiency Motor retrofit and Cogged V-belts retrofit. This tool calculates energy savings, demand reduction, cost savings, and building life cycle costs including: simple payback, discounted payback, net-present value, and savings to investment ratio. In addition this tool also displays the environmental benefits of a project.

  8. Energy conservation in museums

    SciTech Connect

    Ucar, M.; Doering, G.C.

    1980-07-01

    An overall assessment of energy conservation in museums in New York is made in view of the special environmental considerations involved. The special relative humidity, temperature, and lighting requirements of museums were studied extensively. An energy consumption data base was formed with actual energy use data obtained from over fifty institutions across the state. The computerized energy consumption data base compiled covers an extremely wide range of energy usage levels. On-site energy consumption ranged from approximately 20,000 to 400,000 Btu/ft/sup 2/ year. The data base includes small rural institutions and large metropolitan museums, historic and modern structures, seasonal and year-round museums, single buildings and collections of buildings, single-story buildings and multiple-story buildings, an aquarium, and a zoo. Thus, it is difficult to identify trends in the energy consumption data and to make correlations with such parameters as age, type, size, etc. Walk-through or mini energy audits were performed on ten museums located in various parts of New York State. This project also included a thorough study of all potential funding sources to which museums can apply for financing energy conservation measures. Sources of technical assistance and information were also identified. (MCW)

  9. 78 FR 23335 - Energy Conservation Program: Energy Conservation Standards for Distribution Transformers

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-04-18

    ...The Energy Policy and Conservation Act of 1975 (EPCA), as amended, prescribes energy conservation standards for various consumer products and certain commercial and industrial equipment, including distribution transformers. EPCA also requires the U.S. Department of Energy (DOE) to determine whether more-stringent standards would be technologically feasible and economically justified, and would save a significant amount of energy. In this final rule, DOE is adopting more- stringent energy conservation standards for distribution transformers. It has determined that the amended energy conservation standards for this equipment would result in significant conservation of energy, and are technologically feasible and economically justified.

  10. 76 FR 57515 - Energy Conservation Program: Energy Conservation Standards for Residential Refrigerators...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-09-15

    ...The Energy Policy and Conservation Act (EPCA) prescribes energy conservation standards for various consumer products and commercial and industrial equipment, including refrigerators, refrigerator-freezers, and freezers. EPCA also requires the U.S. Department of Energy (DOE) to determine if more stringent, amended standards for these products are technologically feasible and economically justified, and would save a significant amount of energy. In this final rule, DOE is adopting more stringent energy conservation standards for refrigerators, refrigerator-freezers, and freezers. It has determined that the amended energy conservation standards for these products would result in the significant conservation of energy and are technologically feasible and economically justified.

  11. 76 FR 70547 - Energy Conservation Program: Energy Conservation Standards for Fluorescent Lamp Ballasts

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-11-14

    ...The Energy Policy and Conservation Act of 1975 (EPCA), as amended, prescribes energy conservation standards for various consumer products and certain commercial and industrial equipment, including fluorescent lamp ballasts. EPCA also requires the U.S. Department of Energy (DOE) to determine whether any new or amended standards would be technologically feasible and economically justified, and would save a significant amount of energy. In this final rule, DOE adopts new and amended federal energy conservation standards for fluorescent lamp ballasts. It has determined that the new and amended energy conservation standards for these products would result in significant conservation of energy, and are technologically feasible and economically justified.

  12. Supply curves of conserved energy

    NASA Astrophysics Data System (ADS)

    Meier, A. K.

    1982-05-01

    Supply curves of conserved energy provide an accounting framework that expresses the potential for energy conservation. The economic worthiness of a conservation measure is expressed in terms of the cost of conserved energy, and a measure is considered economical when the cost of conserved energy is less than the price of the energy it replaces. A supply curve of conserved energy is independent of energy prices; however, the economical reserves of conserved energy will depend on energy prices. Double-counting of energy savings and error propagation are common problems when estimating conservation potentials, but supply curves minimize these difficulties and make their consequences predictable. The sensitivity of the cost of conserved energy is examined, as are variations in the optimal investment strategy in response to changes in inputs. Guidelines are presented for predicting the consequences of such changes.

  13. Saving Money Through Energy Conservation.

    ERIC Educational Resources Information Center

    Presley, Michael H.; And Others

    This publication is an introduction to personal energy conservation. The first chapter presents a rationale for conserving energy and points out that private citizens control about one third of this country's energy consumption. Chapters two and three show how to save money by saving energy. Chapter two discusses energy conservation methods in the…

  14. Saving Money Through Energy Conservation.

    ERIC Educational Resources Information Center

    Presley, Michael H.; And Others

    This publication is an introduction to personal energy conservation. The first chapter presents a rationale for conserving energy and points out that private citizens control about one third of this country's energy consumption. Chapters two and three show how to save money by saving energy. Chapter two discusses energy conservation methods in the…

  15. Poultry Industry Energy Research

    NASA Technical Reports Server (NTRS)

    1979-01-01

    The poultry industry, a multi-billion dollar business in the United States, uses great amounts of energy in such operations as broiler growing, feed manufacturing, poultry processing and packing. Higher costs and limited supply of fuels common to the industry are predicted, so poultry producers are seeking ways to reduce energy expenditure. NASA is providing assistance to Delmarva Poultry Industry, Inc., an association of some 4,000 growers and suppliers in one of the nation's largest poultry production areas. Delmarva is the East Coast peninsula that includes Delaware and parts of Maryland and Virginia. The upper right photo shows a weather station in the Delmarva area (wind indicator on the pole, other instruments in the elevated box). The station is located at the University of Maryland's Broiler Sub-station, Salisbury; Maryland, where the university conducts research on poultry production and processing. The sub-station is investigating ways of conserving energy in broiler production and also exploring the potential of solar collectors as an alternative energy source. For these studies, it is essential that researchers have continuous data on temperature, pressure, wind speed and direction, solar intensity and cloud cover. Equipment to acquire such data was loaned and installed by NASA's Wallops Flight Center, Wallops Island, Virginia.

  16. Why not energy conservation?

    NASA Astrophysics Data System (ADS)

    Carlson, Shawn

    2016-01-01

    Energy conservation is a deep principle that is obeyed by all of the fundamental forces of nature. It puts stringent constraints on all systems, particularly systems that are ‘isolated,’ meaning that no energy can enter or escape. Notwithstanding the success of the principle of stationary action, it is fair to wonder to what extent physics can be formulated from the principle of stationary energy. We show that if one interprets mechanical energy as a state function, then its stationarity leads to a novel formulation of classical mechanics. However, unlike Lagrangian and Hamiltonian mechanics, which deliver their state functions via algebraic proscriptions (i.e., the Lagrangian is always the difference between a system’s kinetic and potential energies), this new formalism identifies its state functions as the solutions to a differential equation. This is an important difference because differential equations can generate more general solutions than algebraic recipes. When applied to Newtonian systems for which the energy function is separable, these state functions are always the mechanical energy. However, while the stationary state function for a charged particle moving in an electromagnetic field proves not to be energy, the function nevertheless correctly encodes the dynamics of the system. Moreover, the stationary state function for a free relativistic particle proves not to be the energy either. Rather, our differential equation yields the relativistic free-particle Lagrangian (plus a non-dynamical constant) in its correct dynamical context. To explain how this new formalism can consistently deliver stationary state functions that give the correct dynamics but that are not always the mechanical energy, we propose that energy conservation is a specific realization of a deeper principle of stationarity that governs both relativistic and non-relativistic mechanics.

  17. Energy Conservation Code Decoded

    SciTech Connect

    Cole, Pam C.; Taylor, Zachary T.

    2006-09-01

    Designing an energy-efficient, affordable, and comfortable home is a lot easier thanks to a slime, easier to read booklet, the 2006 International Energy Conservation Code (IECC), published in March 2006. States, counties, and cities have begun reviewing the new code as a potential upgrade to their existing codes. Maintained under the public consensus process of the International Code Council, the IECC is designed to do just what its title says: promote the design and construction of energy-efficient homes and commercial buildings. Homes in this case means traditional single-family homes, duplexes, condominiums, and apartment buildings having three or fewer stories. The U.S. Department of Energy, which played a key role in proposing the changes that resulted in the new code, is offering a free training course that covers the residential provisions of the 2006 IECC.

  18. Electric load management and energy conservation

    NASA Technical Reports Server (NTRS)

    Kheir, N. A.

    1976-01-01

    Electric load management and energy conservation relate heavily to the major problems facing power industry at present. The three basic modes of energy conservation are identified as demand reduction, increased efficiency and substitution for scarce fuels. Direct and indirect load management objectives are to reduce peak loads and have future growth in electricity requirements in such a manner to cause more of it to fall off the system's peak. In this paper, an overview of proposed and implemented load management options is presented. Research opportunities exist for the evaluation of socio-economic impacts of energy conservation and load management schemes specially on the electric power industry itself.

  19. Electric load management and energy conservation

    NASA Technical Reports Server (NTRS)

    Kheir, N. A.

    1976-01-01

    Electric load management and energy conservation relate heavily to the major problems facing power industry at present. The three basic modes of energy conservation are identified as demand reduction, increased efficiency and substitution for scarce fuels. Direct and indirect load management objectives are to reduce peak loads and have future growth in electricity requirements in such a manner to cause more of it to fall off the system's peak. In this paper, an overview of proposed and implemented load management options is presented. Research opportunities exist for the evaluation of socio-economic impacts of energy conservation and load management schemes specially on the electric power industry itself.

  20. Recent Trend of Energy Conservation Technologies

    NASA Astrophysics Data System (ADS)

    Kudo, Hiroyuki

    In order to cope with the global warming, importance of energy conservation technologies becomes large and large. This paper shows outline of the recent technology trends and future R&D strategies of national projects in Japan. The basic concept and some important R&D topics of the technology strategies, which will be determined by this September are summarized. They are Super combustion system technologies, Energy utilization technologies beyond time and distance restrictions, Future life environment technologies on energy conservation, Advanced traffic technologies, and New generation device technologies for energy conservation. Some relative R&D themes in industrial sector, civil sector, and transportation sector are also shown.

  1. Labor and energy impacts of energy-conservation measures

    SciTech Connect

    Not Available

    1980-01-01

    Three papers are presented discussing the labor and energy impacts of energy-conservation measures, namely: Generation of the Industry/Occupation Wage Matrix and Related Matters, by Carole Green; Job Shifts from Energy Conservation (Salary Distribution Effects), by Robert A. Herendeen; and Energy and Labor Implication of Improving Thermal Integrity of New Houses, by John Joseph Nangle. A separate abstract was prepared for each paper.

  2. 75 FR 652 - Energy Conservation Program: Certification, Compliance, and Enforcement Requirements for Certain...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-01-05

    ... Energy Conservation Program Requirements for Certain Consumer Products and Commercial and Industrial... and 1904-AB53 Energy Conservation Program: Certification, Compliance, and Enforcement Requirements for... Renewable Energy, Department of Energy. ACTION: Final rule. SUMMARY: The Energy Policy and Conservation Act...

  3. Supply Curves of Conserved Energy

    SciTech Connect

    Meier, Alan Kevin

    1982-05-01

    Supply curves of conserved energy provide an accounting framework that expresses the potential for energy conservation. The economic worthiness of a conservation measure is expressed in terms of the cost of conserved energy, and a measure is considered economical when the cost of conserved energy is less than the price of the energy it replaces. A supply curve of conserved energy is independent of energy prices; however, the economical reserves of conserved energy will depend on energy prices. Double-counting of energy savings and error propagation are common problems when estimating conservation potentials, but supply curves minimize these difficulties and make their consequences predictable. The sensitivity of the cost of conserved energy is examined, as are variations in the optimal investment strategy in response to changes in inputs. Guidelines are presented for predicting the consequences of such changes. The conservation supply curve concept can be applied to peak power, water, pollution, and other markets where consumers demand a service rather than a particular good.

  4. Energy conservation and air transportation

    NASA Technical Reports Server (NTRS)

    1973-01-01

    Air transportation demand and passenger energy demand are discussed, in relation to energy conservation. Alternatives to air travel are reviewed, along with airline advertising and ticket pricing. Cargo energy demand and airline systems efficiency are also examined, as well as fuel conservation techniques. Maximum efficiency of passenger aircraft, from B-747 to V/STOL to British Concorde, is compared.

  5. Energy conservation and air transportation

    NASA Technical Reports Server (NTRS)

    1973-01-01

    Air transportation demand and passenger energy demand are discussed, in relation to energy conservation. Alternatives to air travel are reviewed, along with airline advertising and ticket pricing. Cargo energy demand and airline systems efficiency are also examined, as well as fuel conservation techniques. Maximum efficiency of passenger aircraft, from B-747 to V/STOL to British Concorde, is compared.

  6. Energy conservations from an environmental viewpoint

    SciTech Connect

    Hijikata, Kunio

    1993-12-31

    It is not incorrect to state that all major environmental problems, such as the greenhouse effect, destruction of the ozone layer from CFC`s, acid rain due to air pollution by NOx and SOx, etc., are caused by excessive industrial and residential energy consumption. Considering the finite world energy resources and limited global space, the day might be already upon us in which the total amount of energy consumption in the world should be reduced. To maintain a high living standard without increasing energy consumption, waste energy recovery and energy conservation are vitally important. In order to effective use of energy resources, we should really know the meaning of the energy consumption and the characteristics of energy resources. In this paper, the technological aspects of energy conservation are stated from the standpoint of available energy.

  7. Conserving the Appalachian medicinal plant industry

    Treesearch

    James L. Chamberlain

    2006-01-01

    An industry based on plants that flourish in the mountains of Appalachia is at a critical crossroads. The medicinal plant industry has relied on the conservation of Appalachian forest resources for more than 300 years. There is growing and widespread concern that many of the species, on which this vibrant and substantial industry depends, are being depleted and...

  8. Energy Conservation Through Effective Utilization

    ERIC Educational Resources Information Center

    Berg, Charles A.

    1973-01-01

    Discusses various ways in which the demand for energy could be decreased, focusing not so much on discouraging demand by increasing prices, as on reducing energy consumption by improving efficiency of energy utilization in buildings and in industry. (JR)

  9. Energy Conservation Through Effective Utilization

    ERIC Educational Resources Information Center

    Berg, Charles A.

    1973-01-01

    Discusses various ways in which the demand for energy could be decreased, focusing not so much on discouraging demand by increasing prices, as on reducing energy consumption by improving efficiency of energy utilization in buildings and in industry. (JR)

  10. 78 FR 55889 - Energy Conservation Program: Energy Conservation Standards for Commercial Refrigeration Equipment

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-09-11

    ...The Energy Policy and Conservation Act of 1975 (EPCA), as amended, prescribes energy conservation standards for various consumer products and certain commercial and industrial equipment, including commercial refrigeration equipment (CRE). EPCA also requires the U.S. Department of Energy (DOE) to determine whether more-stringent, amended standards would be technologically feasible and economically justified, and would save a significant amount of energy. In this notice, DOE proposes amended energy conservation standards for commercial refrigeration equipment. The notice also announces a public meeting to receive comment on these proposed standards and associated analyses and results.

  11. 78 FR 64067 - Energy Conservation Program for Consumer Products: Energy Conservation Standards for Residential...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-10-25

    ...Pursuant to the Energy Policy and Conservation Act of 1975 (EPCA), as amended, the U.S. Department of Energy (DOE) must prescribe energy conservation standards for various consumer products and certain commercial and industrial equipment, including residential furnace fans. EPCA requires DOE to determine whether such standards would be technologically feasible and economically justified, and would save a significant amount of energy. In this notice, DOE is proposing new energy conservation standards for residential furnace fans. The notice also announces a public meeting to receive comment on these proposed standards and associated analyses and results.

  12. Energy conservation in quantum mechanics

    NASA Astrophysics Data System (ADS)

    Prentis, Jeffrey J.; Fedak, William A.

    2004-05-01

    In the classical mechanics of conservative systems, the position and momentum evolve deterministically such that the sum of the kinetic energy and potential energy remains constant in time. This canonical trademark of energy conservation is absent in the standard presentations of quantum mechanics based on the Schrödinger picture. We present a purely canonical proof of energy conservation that focuses exclusively on the time-dependent position x(t) and momentum p(t) operators. This treatment of energy conservation serves as an introduction to the Heisenberg picture and illuminates the classical-quantum connection. We derive a quantum-mechanical work-energy theorem and show explicitly how the time dependence of x and p and the noncommutivity of x and p conspire to bring about a perfect temporal balance between the evolving kinetic and potential parts of the total energy operator.

  13. Consumer behavior and energy conservation

    SciTech Connect

    Ester, P.

    1985-01-01

    This study examines the effectiveness of a number of behaviour modification instruments aimed at teaching consumers how to use energy in a more efficient way. The following instruments were tested: energy conservation information, bi-weekly and monthly energy consumption feedback and self-monitoring by consumers of their household energy consumption. This study tries to combine psychological paradigms, experimental approaches and policy relevance.

  14. Energy for industry

    SciTech Connect

    Ross, M.H. ); Steinmeyer, D. )

    1990-09-01

    Economic growth and energy use once marched in lockstep. Now industrial output is climbing while energy use declines. In practice, companies reduce energy consumption by optimizing the cost of existing processes, by introducing process refinements and by making breakthroughs that lead to entirely new methods of manufacture. Each of these are described with examples of each.

  15. Energy Conservation Research Study. Final Report.

    ERIC Educational Resources Information Center

    Cayemberg, Merlin; And Others

    This study explored the availability of energy conservation programs at community colleges; the apparent need for such programs or courses by industry, business, and government; and the types of programs, if any, which should be offered at the vocational/technical level. Information was sought from 52 current two-year programs, the fifty state…

  16. Hearing conservation practices in eight noisy industries

    NASA Astrophysics Data System (ADS)

    Daniell, William E.; Swan, Susan S.; Camp, Janice; Cohen, Martin; McDaniel, Mary M.; Stebbins, John; Leo, Robert

    2005-04-01

    This study evaluated noise exposures and hearing conservation practices at 76 companies in eight industries with high rates of workers' compensation claims for hearing loss. Nearly all companies had exposures that required a hearing conservation program, and more than half had exposures that required consideration of noise controls. The use of noise measurements and consideration of controls was low in all industries. The completeness of hearing conservation programs was strongly associated with the extent of exposure in an industry, although practices varied widely within industries. Most companies had substantial deficiencies. More than one-third did not conduct annual training, and training had shortcomings at many others. One-third had not conducted audiometry. Hearing protection was commonly underused. Reported use was highest at companies with relatively complete programs, and in industries where exposure was most prevalent and least intermittent. Many employees had difficulty estimating how often, and presumably when, their exposure was excessive. There is a need for new strategies to promote and maintain hearing conservation efforts in noisy industries. The industries with greatest margin for improvement are not the noisiest industries but those where exposure is moderate or intermittent. [Work supported by the National Institute for Occupational Safety and Health.

  17. Energy industries abroad

    NASA Astrophysics Data System (ADS)

    1981-09-01

    The relationships between foreign governments and energy industries in many of the world's most important energy producing and consuming nations are examined. The history of hydrocarbon exploration and production is traced and the concessionary and other contractual arrangements entered into by foreign governments and international oil companies are reviewed. Petroleum legislation that was enacted, how government institutions gradually assumed more responsibility for energy matters, and how the former concessionaires adapted to accommodate this increased government participation in the energy sector is described.

  18. Science Activities in Energy: Conservation.

    ERIC Educational Resources Information Center

    Oak Ridge Associated Universities, TN.

    Presented is a science activities in energy package which includes 14 activities relating to energy conservation. Activities are simple, concrete experiments for fourth, fifth and sixth grades, which illustrate principles and problems relating to energy. Each activity is outlined on a simple card which is introduced by a question. A teacher's…

  19. Reversible energy quenching and conservation

    NASA Astrophysics Data System (ADS)

    Fedorenko, S. G.; Burshtein, A. I.

    2010-05-01

    The kinetics of reversible energy transfer from photo-excited donors to energy acceptors is studied at arbitrary concentrations of both and any relationship between the decay-times of the reactants. The backward reaction of transfer products in a bulk is included in the consideration. Its contribution to delayed fluorescence, resulting from the energy conservation on the long-lived acceptors, is specified.

  20. Renewable energy and wildlife conservation

    USGS Publications Warehouse

    Khalil, Mona

    2016-09-09

    The renewable energy sector is rapidly expanding and diversifying the power supply of the country. Yet, as our Nation works to advance renewable energy and to conserve wildlife, some conflicts arise. To address these challenges, the U.S. Geological Survey (USGS) is conducting innovative research and developing workable solutions to reduce impacts of renewable energy production on wildlife.

  1. Conservation and renewable energy program

    NASA Astrophysics Data System (ADS)

    Vaughan, K. H.

    1990-04-01

    This bibliography lists reports and selected papers published under the Oak Ridge National Laboratory Conservation and Renewable Energy Program from 1986 through February 1990. Most of the documents in the bibliography are available from Oak Ridge National Laboratory.

  2. Designing for Energy Conservation.

    ERIC Educational Resources Information Center

    Estes, R. C.

    This document is a description of the energy efficient designs for new schools in the Alief Independent School District of Houston, Texas. Exhibit A shows how four major school projects differ from conventional designs. Parameters and designs for heating, ventilating, air conditioning, and lighting are given. Twenty year projected energy costs and…

  3. Energy conservation principles

    USDA-ARS?s Scientific Manuscript database

    This paper and presentation discuss preliminary findings from energy audits conducted in cotton gins in six states including the allocation of motor horse power and kilowatt hours energy consumption per bale. General inferences will be drawn from information collected at gin plants of various bale...

  4. Growing and energy conservation

    Treesearch

    Eric van Steenis

    2009-01-01

    As energy costs increase, resistance is strong to these costs becoming a larger proportion of production cost. Many options can be considered in this battle. This presentation deals only with altering thermostat settings during initial crop growth stages early in the season. Reducing energy requirements in greenhouse crop production while maintaining quality and on-...

  5. Designing for Energy Conservation.

    ERIC Educational Resources Information Center

    Estes, R. C.

    This document is a description of the energy efficient designs for new schools in the Alief Independent School District of Houston, Texas. Exhibit A shows how four major school projects differ from conventional designs. Parameters and designs for heating, ventilating, air conditioning, and lighting are given. Twenty year projected energy costs and…

  6. Mode filters and energy conservation.

    PubMed

    Udovydchenkov, Ilya A; Rypina, Irina I; Brown, Michael G

    2010-05-01

    The discrete form of the mode filtering problem is considered. The relevant equations constitute a linear inverse problem. Solutions to problems of this type are subject to a well-known trade-off between resolution and precision. But unlike the typical linear inverse problem, the correctly formulated mode filtering problem is subject to an energy conservation constraint. This letter focuses on the importance of satisfying, approximately at least, the energy conservation constraint when mode filtering is performed.

  7. Energy Conservation in School Transportation Systems. Energy Conservation Guidelines 4.

    ERIC Educational Resources Information Center

    Giesguth, John, Ed.; Scheingold, Edward, Ed.

    Fourth in a series of four publications on energy conservation, this booklet offers basic guidelines for sound fuel reduction in school transportation. The pamphlet suggests ways to implement energy-saving practices, guidelines for preventive maintenance of school vehicles, a definition of the drivers' and superintendents' roles, school policies…

  8. Energy Conservation Guidelines - 4: Energy Conservation in School Transportation Systems.

    ERIC Educational Resources Information Center

    Giesguth, John, Ed.; Scheingold, Edward, Ed.

    Recommended are practices for reducing energy consumed in the process of transporting school pupils. Among the areas in which energy conservation measures may be instituted are preventive bus maintenance, field trip coordination, bus driving practices, modified scheduling policies, and training of bus drivers. (WB)

  9. Energy Conservation Guidelines - 2: Energy Conservation in School Facilities.

    ERIC Educational Resources Information Center

    Peterson, Irving M., Ed.; Gates, Richard M., Ed.

    The suggestions contained in this guide are intended to help reduce energy consumption in school facilities. Energy conservation measures are discussed on three levels: (1) the educational program and activities schedule, (2) operation of the facility and supporting systems, and (3) the physical plant. Discussed are high cost, medium cost, and low…

  10. Energy Conservation: Guidelines for Action. Suggested Guidelines for Local School District Development of Energy Conservation Programs.

    ERIC Educational Resources Information Center

    Michigan Association of School Administrators, East Lansing.

    Curriculum guidelines for the local development of energy conservation programs in public schools reflect an interdisciplinary educational approach--the result of a coordinated effort by industry, commerce, education, and government agencies concerned with the energy crisis. The scope and nature of the problem, with its implications for education…

  11. Energy conservation system

    SciTech Connect

    Long, W.E.

    1984-02-21

    Conservation system is disclosed for use with a power source which supplies power over premises wiring to utilization equipment such as lighting equipment. Contactors and a control system are provided to temporarily interrupt the supplying of power from the power source to at least a portion of the utilization equipment. At least one switching circuit is connected in series between the power and that portion of the utilization equipment. The switching circuit is responsive to the temporary interruption of power to open the circuit between the power source and that portion of the utilization equipment and to maintain that circuit open after the temporary interruption of power ceases, thereby automatically deenergizing that portion of the utilization equipment upon interruption of the power.

  12. The NASA Energy Conservation Program

    NASA Technical Reports Server (NTRS)

    Gaffney, G. P.

    1977-01-01

    Large energy-intensive research and test equipment at NASA installations is identified, and methods for reducing energy consumption outlined. However, some of the research facilities are involved in developing more efficient, fuel-conserving aircraft, and tradeoffs between immediate and long-term conservation may be necessary. Major programs for conservation include: computer-based systems to automatically monitor and control utility consumption; a steam-producing solid waste incinerator; and a computer-based cost analysis technique to engineer more efficient heating and cooling of buildings. Alternate energy sources in operation or under evaluation include: solar collectors; electric vehicles; and ultrasonically emulsified fuel to attain higher combustion efficiency. Management support, cooperative participation by employees, and effective reporting systems for conservation programs, are also discussed.

  13. The NASA Energy Conservation Program

    NASA Technical Reports Server (NTRS)

    Gaffney, G. P.

    1977-01-01

    Large energy-intensive research and test equipment at NASA installations is identified, and methods for reducing energy consumption outlined. However, some of the research facilities are involved in developing more efficient, fuel-conserving aircraft, and tradeoffs between immediate and long-term conservation may be necessary. Major programs for conservation include: computer-based systems to automatically monitor and control utility consumption; a steam-producing solid waste incinerator; and a computer-based cost analysis technique to engineer more efficient heating and cooling of buildings. Alternate energy sources in operation or under evaluation include: solar collectors; electric vehicles; and ultrasonically emulsified fuel to attain higher combustion efficiency. Management support, cooperative participation by employees, and effective reporting systems for conservation programs, are also discussed.

  14. ECASTAR: Energy Conservation; an Assessment of Systems, Technologies and Requirements

    NASA Technical Reports Server (NTRS)

    1975-01-01

    A methodology for a systems approach display and assessment of the potential for energy conservation actions and the impacts of those actions was presented. The U.S. economy is divided into four sectors: energy industry, industry, residential/commercial and transportation. Each sector is assessed with respect to energy conservation actions and impacts. The four sectors are combined and three strategies for energy conservation actions for the combined sectors are assessed. The three strategies (national energy conservation, electrification and diversification) represent energy conservation actions for the near term (now to 1985), the mid term (1985 to 2000) and the far term (2000 and beyond). The assessment procedure includes input/output analysis to bridge the flows between the sectors, and net economics and net energetics as performance criteria for the conservation actions. Targets of opportunity for large net energy net energy savings and the application of technology to achieve these savings are discussed.

  15. Conserving Energy in School Buildings.

    ERIC Educational Resources Information Center

    Boice, John R.

    Educational Facilities Laboratories is developing a computer-based technical service--The Public Schools Energy Conservation Service (PSECS). As presently envisioned, PSECS would be capable of providing each participating district with information in five areas: (1) guidelines and instruction for establishing an energy usage data base; (2) a…

  16. Careers in the Renewable Energy and Conservation Professions and Trades.

    ERIC Educational Resources Information Center

    Department of Energy, Washington, DC.

    Many kinds of jobs can be found in the renewable energy and energy conservation industries. This pamphlet indicates that a large career potential exists within the solar and conservation professions and trades. These careers consist of individuals who design, build, or install solar heating or hot water systems, who implement energy conservation…

  17. National Emission Standards for Hazardous Air Pollutants (NESHAP) for Major Sources: Industrial, Commercial, and Institutional Boilers - Guidance for Calculating Emission Credits Resulting from Implementation of Energy Conservation Measures

    EPA Pesticide Factsheets

    The purpose of this July 2012 document is to provide guidance for developing a consistent approach to documenting efficiency credits generated from energy conservation measures in the Implementation Plan for boilers covered by the Boiler MACT rule.

  18. Steam System Energy Conservation Measures

    SciTech Connect

    Ian Metzger, Jesse Dean

    2010-12-31

    This software requires inputs of simple system inventory information and calculates the energy and cost benefits of various retrofit opportunities. This tool includes energy conservation measures for: fixing steam leaks. This tool calculates energy savings, demand reduction, cost savings, and building life cycle costs including: simple payback, discounted payback, net-present value, and savings to investment ratio. In addition this tool also displays the environmental benefits of a project.

  19. Energy: forecasting, data, and conservation

    SciTech Connect

    Bertram, K.M.; Mannering, F.L.; Harrington, I.E.; Boyce, D.E.; Janson, B.N.

    1981-01-01

    The 14 papers in this report deal with the following areas: projected potential piggyback energy savings through the year 2000; use of density function and Monte Carlo simulation techniques to evaluate policy impacts on travel demand; direct energy consumption for personal travel in the Chicago metropolitan area; short-term forecasting of gasoline demand; issues for developing state energy emergency conservation plans; analysis of long-term transportation energy use; state-level stock system model of gasoline demand; fuel consumption on congested freeways; measures of the impacts of changes in motor-fuel supply in Massachusetts; dual price system for management of gasoline lines; projections of changes in vehicle technology and characteristics to improve fuel economy; framework for analyzing the 1979 summer fuel crisis: the New York state experience; simulating the impact of transportation-related energy policies on travel behavior and transportation demand; and an assessment of games as methods of providing information on gasoline conservation.

  20. Process modeling and industrial energy use

    SciTech Connect

    Howe, S O; Pilati, D A; Sparrow, F T

    1980-11-01

    How the process models developed at BNL are used to analyze industrial energy use is described and illustrated. Following a brief overview of the industry modeling program, the general methodology of process modeling is discussed. The discussion highlights the important concepts, contents, inputs, and outputs of a typical process model. A model of the US pulp and paper industry is then discussed as a specific application of process modeling methodology. Case study results from the pulp and paper model illustrate how process models can be used to analyze a variety of issues. Applications addressed with the case study results include projections of energy demand, conservation technology assessment, energy-related tax policies, and sensitivity analysis. A subsequent discussion of these results supports the conclusion that industry process models are versatile and powerful tools for energy end-use modeling and conservation analysis. Information on the current status of industry models at BNL is tabulated.

  1. 76 FR 37407 - Energy Conservation Program: Energy Conservation Standards for Residential Furnaces and...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-06-27

    ...The Energy Policy and Conservation Act of 1975 (EPCA), as amended, prescribes energy conservation standards for various consumer products and certain commercial and industrial equipment, including residential furnaces and residential central air conditioners and heat pumps. EPCA also requires the U.S. Department of Energy (DOE) to determine whether more-stringent, amended standards for these products would be technologically feasible and economically justified, and would save a significant amount of energy. In this direct final rule, DOE adopts amended energy conservation standards for residential furnaces and for residential central air conditioners and heat pumps. A notice of proposed rulemaking that proposes identical energy efficiency standards is published elsewhere in this issue of the Federal Register. If DOE receives adverse comment and determines that such comment may provide a reasonable basis for withdrawing the direct final rule, this final rule will be withdrawn, and DOE will proceed with the proposed rule.

  2. 76 FR 22453 - Energy Conservation Program: Energy Conservation Standards for Residential Clothes Dryers and...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-04-21

    ...The Energy Policy and Conservation Act (EPCA) prescribes energy conservation standards for various consumer products and commercial and industrial equipment, including residential clothes dryers and room air conditioners. EPCA also requires the U.S. Department of Energy (DOE) to determine if amended standards for these products are technologically feasible and economically justified, and would save a significant amount of energy. In this direct final rule, DOE adopts amended energy conservation standards for residential clothes dryers and room air conditioners. A notice of proposed rulemaking that proposes identical energy efficiency standards is published elsewhere in today's Federal Register. If DOE receives adverse comment and determines that such comment may provide a reasonable basis for withdrawing the direct final rule, this final rule will be withdrawn and DOE will proceed with the proposed rule.

  3. Energy conservation indicators. 1982 annual report

    SciTech Connect

    Belzer, D.B.

    1982-09-01

    A series of Energy Conservation Indicators were developed for the Department of Energy to assist in the evaluation of current and proposed conservation strategies. As descriptive statistics that signify current conditions and trends related to efficiency of energy use, indicators provide a way of measuring, monitoring, or inferring actual responses by consumers in markets for energy services. Related sets of indicators are presented in some 40 one-page indicator summaries. Indicators are shown graphically, followed by several paragraphs that explain their derivation and highlight key findings. Indicators are classified according to broad end-use sectors: Aggregate (economy), Residential, Commercial, Industrial, Transportation and Electric Utilities. In most cases annual time series information is presented covering the period 1960 through 1981.

  4. Overview of energy-conservation research opportunities

    SciTech Connect

    Hopp, W.J.; Hauser, S.G.; Hane, G.J.; Gurwell, W.E.; Bird, S.P.; Cliff, W.C.; Williford, R.E.; Williams, T.A.; Ashton, W.B.

    1981-12-01

    This document is a study of research opportunities that are important to developing advanced technologies for efficient energy use. The study's purpose is to describe a wide array of attractive technical areas from which specific research and development programs could be implemented. Research areas are presented for potential application in each of the major end-use sectors. The study develops and applies a systematic approach to identifying and screening applied energy conservation research opportunities. To broadly cover the energy end-use sectors, this study develops useful information relating to the areas where federally-funded applied research will most likely play an important role in promoting energy conservation. This study is not designed to produce a detailed agenda of specific recommended research activities. The general information presented allows uniform comparisons of disparate research areas and as such provides the basis for formulating a cost-effective, comprehensive federal-applied energy conservation research strategy. Chapter 2 discusses the various methodologies that have been used in the past to identify research opportunities and details the approach used here. In Chapters 3, 4, and 5 the methodology is applied to the buildings, transportation, and industrial end-use sectors and the opportunities for applied research in these sectors are discussed.Chapter 6 synthesizes the results of the previous three chapters to give a comprehensive picture of applied energy conservation research opportunities across all end-use sectors and presents the conclusions to the report.

  5. Energy conservation in swine buildings

    SciTech Connect

    Jones, D.D.; Friday, W.H.

    1980-05-01

    Saving energy in confinement swine buildings can be achieved by conserving existing animal heat through both proper building construction and control of the environment. Environmental management practices considered include building insulation and modifications, heating and cooling system selection, ventilation system adjustments, and proper building temperature. (MCW)

  6. Recreation Planning for Energy Conservation

    ERIC Educational Resources Information Center

    Gold, Seymour M.

    1977-01-01

    To conserve energy consumed by cars and to improve the environment by reducing air pollution caused by them, communities should develop and expand already existing urban parks so they will be attractive to potential users who can reach them by walking or bicyling. (JD)

  7. Energy conservation is a waste

    SciTech Connect

    Inhaber, H.

    1998-07-01

    Energy conservation is virtually always a bust. Governments around the world continually trot out new schemes to reduce energy use and promote efficiency. The prime American example of this futility is government regulation of automobile gas mileage. Prompted by the Arab oil embargo of 1973, Congress mandated a doubling of gas mileage. What happened? Gasoline consumption rose from 1973 to the 1990s, as the roads were flooded with energy-efficient cars. Huge sport-utility vehicles crowd parking lots, also thanks to more efficient engines. Conservation fails because it takes no account of economics of human nature. The combination of greater engine efficiency and rising disposable income has produced a true golden age of motoring. In the same way, what is saved by installing special light bulbs is often wasted on new hot tubs, exterior lighting and a host of other energy uses, as homeowners assume that their electric bills will drop off substantially. In spite of these and dozens of other clear failures, the claims for conservation to solve virtually all the national energy dilemmas continue. Few if any are valid. While each of us can reduce energy use in one or two areas, one finds that the nation gradually uses more.

  8. Nonprice incentives and energy conservation.

    PubMed

    Asensio, Omar I; Delmas, Magali A

    2015-02-10

    In the electricity sector, energy conservation through technological and behavioral change is estimated to have a savings potential of 123 million metric tons of carbon per year, which represents 20% of US household direct emissions in the United States. In this article, we investigate the effectiveness of nonprice information strategies to motivate conservation behavior. We introduce environment and health-based messaging as a behavioral strategy to reduce energy use in the home and promote energy conservation. In a randomized controlled trial with real-time appliance-level energy metering, we find that environment and health-based information strategies, which communicate the environmental and public health externalities of electricity production, such as pounds of pollutants, childhood asthma, and cancer, outperform monetary savings information to drive behavioral change in the home. Environment and health-based information treatments motivated 8% energy savings versus control and were particularly effective on families with children, who achieved up to 19% energy savings. Our results are based on a panel of 3.4 million hourly appliance-level kilowatt-hour observations for 118 residences over 8 mo. We discuss the relative impacts of both cost-savings information and environmental health messaging strategies with residential consumers.

  9. Nonprice incentives and energy conservation

    PubMed Central

    Asensio, Omar I.; Delmas, Magali A.

    2015-01-01

    In the electricity sector, energy conservation through technological and behavioral change is estimated to have a savings potential of 123 million metric tons of carbon per year, which represents 20% of US household direct emissions in the United States. In this article, we investigate the effectiveness of nonprice information strategies to motivate conservation behavior. We introduce environment and health-based messaging as a behavioral strategy to reduce energy use in the home and promote energy conservation. In a randomized controlled trial with real-time appliance-level energy metering, we find that environment and health-based information strategies, which communicate the environmental and public health externalities of electricity production, such as pounds of pollutants, childhood asthma, and cancer, outperform monetary savings information to drive behavioral change in the home. Environment and health-based information treatments motivated 8% energy savings versus control and were particularly effective on families with children, who achieved up to 19% energy savings. Our results are based on a panel of 3.4 million hourly appliance-level kilowatt–hour observations for 118 residences over 8 mo. We discuss the relative impacts of both cost-savings information and environmental health messaging strategies with residential consumers. PMID:25583494

  10. Industry focus: industrial wood energy

    SciTech Connect

    Not Available

    1982-01-01

    A special feature including a buyers' guide for wood energy equipment and 5 articles by separate authors: Beijer, J. Reforestation plan aims to make steel from trees. 11-12. Eucalypts grown on the Minas Gerais hills in south-central Brazil will soon become the prime source of charcoal for the blast furnaces of Florestal Acesita steel mill. Simpson, W.; Tschernitz, J. Low-cost solar dry kiln gets trial in Sri Lanka. p. 13 Fraser, H.R. Wood-fueled power plant heats debate in Germany. 14-15. Orr, A. Cogeneration - how to get double duty from energy. 16-17. Fraser, H.R. Energy (methanol) from wood is goal of ambitious Brazilian plant. p.18.

  11. The politics of energy conservation

    SciTech Connect

    Nivola, P.

    1986-01-01

    After a decade of debate about U.S. energy policy, the two political parties reached consensus that conservation is needed to achieve energy efficiency and to ensure adequate future supplies. But what is the most effective spur to energy conservation. In this book, Pietro S. Nivola argues that basic pricing reform in all energy sectors, though politically controversial, should be the heart of a national energy plan. Petroleum prices were fully deregulated in 1981, but wasteful pricing formulas still plague other important energy sectors like natural gas and electricity. In tracing congressional action on various energy bills in the late 1970s and early 1980s, the author shows that federal policymakers often bypassed or delayed important decisions on pricing reform. He analyzes how special interest groups, public opinion, and geographically based influences have affected congressional voting patterns and led to compromises that resulted in ineffective, or even harmful, legislation. He also addresses the role of governmental leaders and institutions in shaping the legislation. Beyond these various pressures, Nivola asserts, the conflict in Congress over energy pricing stems from intense political convictions about the role of government. One side in the congressional debate persistently attempted to use federal energy pricing policy to solve general problems of social inequity.

  12. A Compendium of Energy Conservation Success Stories

    DOE R&D Accomplishments Database

    1988-09-01

    Three-quarters of DOE's Conservation R and D funds have been devoted to technology research and development: basic and applied research, exploratory R and D, engineering feasibility studies, pilot-scale prototype R and D, and technology demonstration. Non R and D projects have involved technology assessment program planning and analysis, model development, technology transfer and consumer information, health effects and safety research, and technical support for rule making. The success stories summarized in this compendium fall into three general categories: Completed Technology Success Stories, projects that have resulted in new energy-saving technologies that are presently being used in the private sector; Technical Success Stories, projects that have produced or disseminated important scientific/technical information likely to result in future energy savings; Program Success Stories, non-R and D activities that have resulted in nationally significant energy benefits. The Energy Conservation research and development program at DOE is managed by the Office of Conservation under the direction of the Deputy Assistant Secretary for Conservation. Three subordinate Program Offices correspond to the buildings, transportation, and industrial end-use sectors. A fourth subordinate Program Office{endash}Energy Utilization Research{endash}sponsors research and technical inventions for all end-use sectors.

  13. A compendium of energy conservation success stories

    SciTech Connect

    Not Available

    1988-09-01

    Three-quarters of DOE's Conservation R and D funds have been devoted to technology research and development: basic and applied research, exploratory R and D, engineering feasibility studies, pilot-scale prototype R and D, and technology demonstration. Non R and D projects have involved technology assessment program planning and analysis, model development, technology transfer and consumer information, health effects and safety research, and technical support for rule making. The success stories summarized in this compendium fall into three general categories: Completed Technology Success Stories, projects that have resulted in new energy-saving technologies that are presently being used in the private sector; Technical Success Stories, projects that have produced or disseminated important scientific/technical information likely to result in future energy savings; Program Success Stories, non-R and D activities that have resulted in nationally significant energy benefits. The Energy Conservation research and development program at DOE is managed by the Office of Conservation under the direction of the Deputy Assistant Secretary for Conservation. Three subordinate Program Offices correspond to the buildings, transportation, and industrial end-use sectors. A fourth subordinate Program Office/endash/Energy Utilization Research/endash/sponsors research and technical inventions for all end-use sectors.

  14. Energy Industry 2004

    DTIC Science & Technology

    2004-01-01

    Support Center Energy supply and distribution for DOD Alexandria, VA H2Gen Hydrogen generation Frederick, MD BP Solar Photovoltaic panel manufacturing...Richard Allen, Office of Management and Budget COL Muslim Altynbayev, Kazakhstan Army Lt Col Linda Dahl, USAF Lt Col Harold Elkins, USAF COL Margie...hydro, geothermal, solar and wind. The following section on current conditions highlights the trends and challenges facing the industry. CURRENT

  15. Corporate Energy Conservation Program for Alcoa North American Extrusions: Office of Industrial Technologies (OIT) Aluminum BestPractices Management Case Study

    SciTech Connect

    U.S. Department of Energy

    2001-08-06

    This case study is the latest in a series on industrial firms who are implementing energy efficient technologies and system improvements into their manufacturing processes. The case studies document the activities, savings, and lessons learned on these projects.

  16. 77 FR 7281 - Energy Conservation Program: Energy Conservation Standards for Distribution Transformers

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-02-10

    ...The Energy Policy and Conservation Act of 1975 (EPCA), as amended, prescribes energy conservation standards for various consumer products and certain commercial and industrial equipment, including low-voltage dry-type distribution transformers, and directs the U.S. Department of Energy (DOE) to prescribe standards for various other products and equipment, including other types of distribution transformers. EPCA also requires DOE to determine whether more- stringent, amended standards would be technologically feasible and economically justified, and would save a significant amount of energy. In this notice, DOE proposes amended energy conservation standards for distribution transformers. The notice also announces a public meeting to receive comment on these proposed standards and associated analyses and results.

  17. Aerial thermography for energy conservation

    NASA Technical Reports Server (NTRS)

    Jack, J. R.

    1978-01-01

    Thermal infrared scanning from an aircraft is a convenient and commercially available means for determining relative rates of energy loss from building roofs. The need to conserve energy as fuel costs makes the mass survey capability of aerial thermography an attractive adjunct to community energy awareness programs. Background information on principles of aerial thermography is presented. Thermal infrared scanning systems, flight and environmental requirements for data acquisition, preparation of thermographs for display, major users and suppliers of thermography, and suggested specifications for obtaining aerial scanning services were reviewed.

  18. 10 CFR 431.25 - Energy conservation standards and effective dates.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 3 2013-01-01 2013-01-01 false Energy conservation standards and effective dates. 431.25 Section 431.25 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Electric Motors Energy Conservation Standards § 431.25...

  19. 10 CFR 431.77 - Energy conservation standards and their effective dates.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 3 2013-01-01 2013-01-01 false Energy conservation standards and their effective dates. 431.77 Section 431.77 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Commercial Warm Air Furnaces Energy Conservation...

  20. 10 CFR 431.196 - Energy conservation standards and their effective dates.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 3 2012-01-01 2012-01-01 false Energy conservation standards and their effective dates. 431.196 Section 431.196 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Distribution Transformers Energy Conservation Standards §...

  1. 10 CFR 431.25 - Energy conservation standards and effective dates.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 3 2011-01-01 2011-01-01 false Energy conservation standards and effective dates. 431.25 Section 431.25 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Electric Motors Energy Conservation Standards § 431.25...

  2. 10 CFR 431.77 - Energy conservation standards and their effective dates.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 3 2010-01-01 2010-01-01 false Energy conservation standards and their effective dates. 431.77 Section 431.77 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Commercial Warm Air Furnaces Energy Conservation...

  3. 10 CFR 431.196 - Energy conservation standards and their effective dates.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 3 2011-01-01 2011-01-01 false Energy conservation standards and their effective dates. 431.196 Section 431.196 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Distribution Transformers Energy Conservation Standards §...

  4. 10 CFR 431.266 - Energy conservation standards and their effective dates.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 3 2014-01-01 2014-01-01 false Energy conservation standards and their effective dates. 431.266 Section 431.266 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Commercial Prerinse Spray Valves Energy Conservation...

  5. 10 CFR 431.206 - Energy conservation standards and their effective dates.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 3 2012-01-01 2012-01-01 false Energy conservation standards and their effective dates. 431.206 Section 431.206 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Illuminated Exit Signs Energy Conservation Standards §...

  6. 10 CFR 431.286 - Energy conservation standards and their effective dates.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 3 2010-01-01 2010-01-01 false Energy conservation standards and their effective dates. 431.286 Section 431.286 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Mercury Vapor Lamp Ballasts Energy Conservation...

  7. 10 CFR 431.266 - Energy conservation standards and their effective dates.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 3 2011-01-01 2011-01-01 false Energy conservation standards and their effective dates. 431.266 Section 431.266 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Commercial Prerinse Spray Valves Energy Conservation...

  8. 10 CFR 431.196 - Energy conservation standards and their effective dates.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 3 2014-01-01 2014-01-01 false Energy conservation standards and their effective dates. 431.196 Section 431.196 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Distribution Transformers Energy Conservation Standards §...

  9. 10 CFR 431.77 - Energy conservation standards and their effective dates.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 3 2014-01-01 2014-01-01 false Energy conservation standards and their effective dates. 431.77 Section 431.77 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Commercial Warm Air Furnaces Energy Conservation...

  10. 10 CFR 431.286 - Energy conservation standards and their effective dates.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 3 2014-01-01 2014-01-01 false Energy conservation standards and their effective dates. 431.286 Section 431.286 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Mercury Vapor Lamp Ballasts Energy Conservation...

  11. 10 CFR 431.206 - Energy conservation standards and their effective dates.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 3 2010-01-01 2010-01-01 false Energy conservation standards and their effective dates. 431.206 Section 431.206 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Illuminated Exit Signs Energy Conservation Standards §...

  12. 10 CFR 431.266 - Energy conservation standards and their effective dates.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 3 2010-01-01 2010-01-01 false Energy conservation standards and their effective dates. 431.266 Section 431.266 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Commercial Prerinse Spray Valves Energy Conservation...

  13. 10 CFR 431.206 - Energy conservation standards and their effective dates.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 3 2011-01-01 2011-01-01 false Energy conservation standards and their effective dates. 431.206 Section 431.206 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Illuminated Exit Signs Energy Conservation Standards §...

  14. 10 CFR 431.266 - Energy conservation standards and their effective dates.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 3 2012-01-01 2012-01-01 false Energy conservation standards and their effective dates. 431.266 Section 431.266 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Commercial Prerinse Spray Valves Energy Conservation...

  15. 10 CFR 431.206 - Energy conservation standards and their effective dates.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 3 2013-01-01 2013-01-01 false Energy conservation standards and their effective dates. 431.206 Section 431.206 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Illuminated Exit Signs Energy Conservation Standards §...

  16. 10 CFR 431.246 - Energy conservation standards and their effective dates.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 3 2011-01-01 2011-01-01 false Energy conservation standards and their effective dates. 431.246 Section 431.246 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Unit Heaters Energy Conservation Standards § 431.246...

  17. 10 CFR 431.246 - Energy conservation standards and their effective dates.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 3 2013-01-01 2013-01-01 false Energy conservation standards and their effective dates. 431.246 Section 431.246 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Unit Heaters Energy Conservation Standards § 431.246...

  18. 10 CFR 431.136 - Energy conservation standards and their effective dates.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 3 2011-01-01 2011-01-01 false Energy conservation standards and their effective dates. 431.136 Section 431.136 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Automatic Commercial Ice Makers Energy Conservation...

  19. 10 CFR 431.136 - Energy conservation standards and their effective dates.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 3 2010-01-01 2010-01-01 false Energy conservation standards and their effective dates. 431.136 Section 431.136 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Automatic Commercial Ice Makers Energy Conservation...

  20. 10 CFR 431.196 - Energy conservation standards and their effective dates.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 3 2010-01-01 2010-01-01 false Energy conservation standards and their effective dates. 431.196 Section 431.196 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Distribution Transformers Energy Conservation Standards §...

  1. 10 CFR 431.136 - Energy conservation standards and their effective dates.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 3 2013-01-01 2013-01-01 false Energy conservation standards and their effective dates. 431.136 Section 431.136 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Automatic Commercial Ice Makers Energy Conservation...

  2. 10 CFR 431.196 - Energy conservation standards and their effective dates.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 3 2013-01-01 2013-01-01 false Energy conservation standards and their effective dates. 431.196 Section 431.196 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Distribution Transformers Energy Conservation Standards §...

  3. 10 CFR 431.25 - Energy conservation standards and effective dates.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 3 2010-01-01 2010-01-01 false Energy conservation standards and effective dates. 431.25 Section 431.25 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Electric Motors Energy Conservation Standards § 431.25...

  4. 10 CFR 431.286 - Energy conservation standards and their effective dates.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 3 2012-01-01 2012-01-01 false Energy conservation standards and their effective dates. 431.286 Section 431.286 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Mercury Vapor Lamp Ballasts Energy Conservation...

  5. 10 CFR 431.246 - Energy conservation standards and their effective dates.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 3 2010-01-01 2010-01-01 false Energy conservation standards and their effective dates. 431.246 Section 431.246 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Unit Heaters Energy Conservation Standards § 431.246...

  6. 10 CFR 431.77 - Energy conservation standards and their effective dates.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 3 2011-01-01 2011-01-01 false Energy conservation standards and their effective dates. 431.77 Section 431.77 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Commercial Warm Air Furnaces Energy Conservation...

  7. 10 CFR 431.246 - Energy conservation standards and their effective dates.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 3 2014-01-01 2014-01-01 false Energy conservation standards and their effective dates. 431.246 Section 431.246 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Unit Heaters Energy Conservation Standards § 431.246...

  8. 10 CFR 431.286 - Energy conservation standards and their effective dates.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 3 2013-01-01 2013-01-01 false Energy conservation standards and their effective dates. 431.286 Section 431.286 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Mercury Vapor Lamp Ballasts Energy Conservation...

  9. 10 CFR 431.136 - Energy conservation standards and their effective dates.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 3 2014-01-01 2014-01-01 false Energy conservation standards and their effective dates. 431.136 Section 431.136 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Automatic Commercial Ice Makers Energy Conservation...

  10. 10 CFR 431.206 - Energy conservation standards and their effective dates.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 3 2014-01-01 2014-01-01 false Energy conservation standards and their effective dates. 431.206 Section 431.206 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Illuminated Exit Signs Energy Conservation Standards §...

  11. 10 CFR 431.25 - Energy conservation standards and effective dates.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 3 2014-01-01 2014-01-01 false Energy conservation standards and effective dates. 431.25 Section 431.25 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Electric Motors Energy Conservation Standards § 431.25...

  12. 10 CFR 431.246 - Energy conservation standards and their effective dates.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 3 2012-01-01 2012-01-01 false Energy conservation standards and their effective dates. 431.246 Section 431.246 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Unit Heaters Energy Conservation Standards § 431.246...

  13. 10 CFR 431.77 - Energy conservation standards and their effective dates.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 3 2012-01-01 2012-01-01 false Energy conservation standards and their effective dates. 431.77 Section 431.77 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Commercial Warm Air Furnaces Energy Conservation...

  14. 10 CFR 431.136 - Energy conservation standards and their effective dates.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 3 2012-01-01 2012-01-01 false Energy conservation standards and their effective dates. 431.136 Section 431.136 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Automatic Commercial Ice Makers Energy Conservation...

  15. 10 CFR 431.25 - Energy conservation standards and effective dates.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 3 2012-01-01 2012-01-01 false Energy conservation standards and effective dates. 431.25 Section 431.25 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Electric Motors Energy Conservation Standards § 431.25...

  16. 10 CFR 431.286 - Energy conservation standards and their effective dates.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 3 2011-01-01 2011-01-01 false Energy conservation standards and their effective dates. 431.286 Section 431.286 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Mercury Vapor Lamp Ballasts Energy Conservation...

  17. 10 CFR 431.266 - Energy conservation standards and their effective dates.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 3 2013-01-01 2013-01-01 false Energy conservation standards and their effective dates. 431.266 Section 431.266 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Commercial Prerinse Spray Valves Energy Conservation...

  18. Relevance of the second law of thermodynamics to energy conservation

    SciTech Connect

    Not Available

    1980-01-01

    An analysis is presented of the potential relevance of the use of analytical tools based on the Second Law of thermodynamics to existing federal programs for energy conservation in the industrial, transportation, buildings, and utility sectors in the US. (LCL)

  19. 75 FR 10873 - Energy Conservation Program: Energy Conservation Standards for Small Electric Motors

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-03-09

    ... Energy 10 CFR Part 431 Energy Conservation Program: Energy Conservation Standards for Small Electric... Regulations#0;#0; ] DEPARTMENT OF ENERGY 10 CFR Part 431 RIN 1904-AB70 Energy Conservation Program: Energy Conservation Standards for Small Electric Motors AGENCY: Office of Energy Efficiency and Renewable...

  20. Biomass energy industry sourcebook

    SciTech Connect

    Troxell, D.L.

    1989-03-01

    The report is a directory of persons/establishments involved with different aspects of the biomass energy industry. These include consulting, engineering design, construction, manufacturing, retail, information, education, and research. Listings include name, address, phone, and a brief description of each firm/organization. Entries are categorized as follows: Consultants and Engineers, Alcohol Production Equipment/Systems, Methane Production Equipment/Systems, Combustion Equipment/Systems, Fuel Processing, Harvesting Equipment/Systems, Silviculture, Transportation, Storage, and Handling, Information Sources, and Databases. The report has been expanded and revised from a previous edition.

  1. National Emission Standards for Hazardous Air Pollutants for Major Sources. Industrial, Commercial, and Institutional Boilers; Guidance for Calculating Emission Credits Resulting from Implementation of Energy Conservation Measures

    SciTech Connect

    Papar, Riyaz; Wright, Anthony; Cox, Daryl

    2012-07-01

    The purpose of this document is to provide guidance for developing a consistent approach to documenting efficiency credits generated from energy conservation measures in the Implementation Plan for boilers covered by the Boiler MACT rule (i.e., Subpart DDDDD of CFR Part 63).

  2. 24 CFR 242.82 - Energy conservation.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 24 Housing and Urban Development 2 2010-04-01 2010-04-01 false Energy conservation. 242.82 Section... INSURANCE FOR HOSPITALS Miscellaneous Requirements § 242.82 Energy conservation. Construction, mechanical equipment, and energy and metering selections shall provide cost-effective energy conservation in...

  3. 24 CFR 242.82 - Energy conservation.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 24 Housing and Urban Development 2 2011-04-01 2011-04-01 false Energy conservation. 242.82 Section... INSURANCE FOR HOSPITALS Miscellaneous Requirements § 242.82 Energy conservation. Construction, mechanical equipment, and energy and metering selections shall provide cost-effective energy conservation in...

  4. 24 CFR 242.82 - Energy conservation.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 24 Housing and Urban Development 2 2012-04-01 2012-04-01 false Energy conservation. 242.82 Section... INSURANCE FOR HOSPITALS Miscellaneous Requirements § 242.82 Energy conservation. Construction, mechanical equipment, and energy and metering selections shall provide cost-effective energy conservation in...

  5. 24 CFR 242.82 - Energy conservation.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 24 Housing and Urban Development 2 2014-04-01 2014-04-01 false Energy conservation. 242.82 Section... INSURANCE FOR HOSPITALS Miscellaneous Requirements § 242.82 Energy conservation. Construction, mechanical equipment, and energy and metering selections shall provide cost-effective energy conservation in...

  6. 24 CFR 242.82 - Energy conservation.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 24 Housing and Urban Development 2 2013-04-01 2013-04-01 false Energy conservation. 242.82 Section... INSURANCE FOR HOSPITALS Miscellaneous Requirements § 242.82 Energy conservation. Construction, mechanical equipment, and energy and metering selections shall provide cost-effective energy conservation in...

  7. Current and future industrial energy service characterizations

    SciTech Connect

    Krawiec, F.; Thomas, T.; Jackson, F.; Limaye, D.R.; Isser, S.; Karnofsky, K.; Davis, T.D.

    1980-10-01

    Current and future energy demands, end uses, and cost used to characterize typical applications and resultant services in the industrial sector of the United States and 15 selected states are examined. A review and evaluation of existing industrial energy data bases was undertaken to assess their potential for supporting SERI research on: (1) market suitability analysis, (2) market development, (3) end-use matching, (3) industrial applications case studies, and (4) identification of cost and performance goals for solar systems and typical information requirements for industrial energy end use. In reviewing existing industrial energy data bases, the level of detail, disaggregation, and primary sources of information were examined. The focus was on fuels and electric energy used for heat and power purchased by the manufacturing subsector and listed by 2-, 3-, and 4-digit SIC, primary fuel, and end use. Projections of state level energy prices to 1990 are developed using the energy intensity approach. The effects of federal and state industrial energy conservation programs on future industrial sector demands were assessed. Future end-use energy requirements were developed for each 4-digit SIC industry and were grouped as follows: (1) hot water, (2) steam (212 to 300/sup 0/F, each 100/sup 0/F interval from 300 to 1000/sup 0/F, and greater than 1000/sup 0/F), and (3) hot air (100/sup 0/F intervals). Volume I details the activities performed in this effort.

  8. Hearing conservation in the primary aluminium industry

    PubMed Central

    Frisch, N.; Dixon-Ernst, C.; Chesson, B. J.; Cullen, M. R.

    2016-01-01

    Background Noise-induced hearing loss has been an intractable problem for heavy industry. Aims To report our experience in reducing the incidence of age-corrected confirmed 10 dB hearing shifts (averaged over 2, 3 and 4kHz) in employees in the primary aluminium industry in Australia over the period 2006–13. Methods We analysed annual audiometric data to determine the number of permanent hearing shifts that occurred in employees in two bauxite mines, three alumina refineries and two aluminium smelters. Annual hearing shift rates were calculated based on the number of employees tested per year. Hearing conservation initiatives undertaken during the study period are described. An assessment of similar exposure group noise exposures was also undertaken to determine the magnitude of noise exposure reduction during the study period. Results Across all operations, hearing shift rates declined from 5.5% per year in 2006 to 1.3% per year in 2013 (P < 0.001). The decline in shift rates was greater in mines and refineries, where baseline shift rates were higher, than in smelter workers. Modest reductions in noise exposure occurred during the study period. Conclusions We observed a substantial decline in hearing shift rates during the study period. We describe the hearing conservation initiatives that were collectively associated with this decline. We suspect these initiatives could be deployed relatively easily and at modest cost in other industries with noise-exposed employees. PMID:26470945

  9. Hearing conservation in the primary aluminium industry.

    PubMed

    Donoghue, A M; Frisch, N; Dixon-Ernst, C; Chesson, B J; Cullen, M R

    2016-04-01

    Noise-induced hearing loss has been an intractable problem for heavy industry. To report our experience in reducing the incidence of age-corrected confirmed 10 dB hearing shifts (averaged over 2, 3 and 4 kHz) in employees in the primary aluminium industry in Australia over the period 2006-13. We analysed annual audiometric data to determine the number of permanent hearing shifts that occurred in employees in two bauxite mines, three alumina refineries and two aluminium smelters. Annual hearing shift rates were calculated based on the number of employees tested per year. Hearing conservation initiatives undertaken during the study period are described. An assessment of similar exposure group noise exposures was also undertaken to determine the magnitude of noise exposure reduction during the study period. Across all operations, hearing shift rates declined from 5.5% per year in 2006 to 1.3% per year in 2013 (P < 0.001). The decline in shift rates was greater in mines and refineries, where baseline shift rates were higher, than in smelter workers. Modest reductions in noise exposure occurred during the study period. We observed a substantial decline in hearing shift rates during the study period. We describe the hearing conservation initiatives that were collectively associated with this decline. We suspect these initiatives could be deployed relatively easily and at modest cost in other industries with noise-exposed employees. © The Author 2015. Published by Oxford University Press on behalf of the Society of Occupational Medicine.

  10. National Emission Standards for Hazardous Air Pollutants for Major Sources: Industrial, Commercial, and Institutional Boilers; Guidance for Calculating Efficiency Credits Resulting from Implementation of Energy Conservation Measures

    SciTech Connect

    Cox, Daryl; Papar, Riyaz; Wright, Dr. Anthony

    2013-02-01

    The purpose of this document is to provide guidance for developing a consistent approach to documenting efficiency credits generated from energy conservation measures in the Implementation Plan for boilers covered by the Boiler MACT rule (i.e., subpart DDDDD of CFR part 63). This document divides Boiler System conservation opportunities into four functional areas: 1) the boiler itself, 2) the condensate recovery system, 3) the distribution system, and 4) the end uses of the steam. This document provides technical information for documenting emissions credits proposed in the Implementation Plan for functional areas 2) though 4). This document does not include efficiency improvements related to the Boiler tune-ups.

  11. National Emission Standards for Hazardous Air Pollutants for Major Sources: Industrial, Commercial, and Institutional Boilers; Guidance for Calculating Emission Credits Resulting from Implementation of Energy Conservation Measures

    SciTech Connect

    Cox, Daryl; Papar, Riyaz; Wright, Dr. Anthony

    2012-07-01

    The purpose of this document is to provide guidance for developing a consistent approach to documenting efficiency credits generated from energy conservation measures in the Implementation Plan for boilers covered by the Boiler MACT rule (i.e., subpart DDDDD of CFR part 63). This document divides Boiler System conservation opportunities into four functional areas: 1) the boiler itself, 2) the condensate recovery system, 3) the distribution system, and 4) the end uses of the steam. This document provides technical information for documenting emissions credits proposed in the Implementation Plan for functional areas 2) though 4). This document does not include efficiency improvements related to the Boiler tune-ups.

  12. Dark Energy from Violation of Energy Conservation.

    PubMed

    Josset, Thibaut; Perez, Alejandro; Sudarsky, Daniel

    2017-01-13

    In this Letter, we consider the possibility of reconciling metric theories of gravitation with a violation of the conservation of energy-momentum. Under some circumstances, this can be achieved in the context of unimodular gravity, and it leads to the emergence of an effective cosmological constant in Einstein's equation. We specifically investigate two potential sources of energy nonconservation-nonunitary modifications of quantum mechanics and phenomenological models motivated by quantum gravity theories with spacetime discreteness at the Planck scale-and show that such locally negligible phenomena can nevertheless become relevant at the cosmological scale.

  13. Dark Energy from Violation of Energy Conservation

    NASA Astrophysics Data System (ADS)

    Josset, Thibaut; Perez, Alejandro; Sudarsky, Daniel

    2017-01-01

    In this Letter, we consider the possibility of reconciling metric theories of gravitation with a violation of the conservation of energy-momentum. Under some circumstances, this can be achieved in the context of unimodular gravity, and it leads to the emergence of an effective cosmological constant in Einstein's equation. We specifically investigate two potential sources of energy nonconservation—nonunitary modifications of quantum mechanics and phenomenological models motivated by quantum gravity theories with spacetime discreteness at the Planck scale—and show that such locally negligible phenomena can nevertheless become relevant at the cosmological scale.

  14. BPA's Eighth Annual Energy Conservation Management Conference : Proceedings.

    SciTech Connect

    Energy Conservation Management Conference; United States. Bonneville Power Administration.

    1981-01-01

    The five-year energy conservation program at Bonneville Power Administration (BPA) is described at the conference. An overview of the program is presented. Topics covered in panel discussions include: how utilities can work effectively with weatherization contractors, homebuilders, energy auditors, and weatherization material suppliers; mechanisms for implementing conservation programs in the commercial sector; experiences gained in existing residential weatherization programs; and streamlining relationships between consumers, utilities, and BPA in providing services and getting feedback. The planning, programming, technical assistance, and engineering thrusts of BPA's conservation programs are discussed. Indoor air quality, renewable energy, and the regulator's role in relationships to energy conservation are discussed. Passive solar programs, DOE initiatives in solar and conservation for buildings, conservation potential in the commercial and industrial sectors, and current conservation research and development are also discussed. (MCW)

  15. 76 FR 70865 - Energy Conservation Program: Energy Conservation Standards for Residential Refrigerators...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-11-16

    ...-AB79 Energy Conservation Program: Energy Conservation Standards for Residential Refrigerators, Refrigerator-Freezers, and Freezers Correction In rule document 2011-22329 appearing on pages 57516...

  16. Energy Conservation for Public Office Buildings

    ERIC Educational Resources Information Center

    Roush, Larry F.

    1973-01-01

    The energy conservation policy for public office buildings includes experimental designs of new federal office buildings in Manchester, New Hampshire and Saginaw, Michigan, as well as immediate energy conservation efforts. (Author/MF)

  17. Energy conservation in electric distribution

    SciTech Connect

    Lee, Chong-Jin

    1994-12-31

    This paper discusses the potential for energy and power savings that exist in electric power delivery systems. These savings translate into significant financial and environmental benefits for electricity producers and consumers as well as for society in general. AlliedSignal`s knowledge and perspectives on this topic are the result of discussions with hundreds of utility executives, government officials and other industry experts over the past decade in conjunction with marketing our Amorphous Metal technology for electric distribution transformers. Amorphous metal is a technology developed by AlliedSignal that significantly reduces the energy lost in electric distribution transformers at an incremental cost of just a few cents per kilo-Watt-hour. The purpose of this paper is to discuss: Amorphous Metal Alloy Technology; Energy Savings Opportunity; The Industrial Barriers and Remedies; Worldwide Demand; and A Low Risk Strategy. I wish this presentation will help KEPCO achieve their stated aims of ensuring sound development of the national economy and enhancement of public life through the economic and stable supply of electric power. AlliedSignal Korea Ltd. in conjunction with AlliedSignal Amorphous Metals in the U.S. are here to work with KEPCO, transformer manufacturers, industry, and government agencies to achieve greater efficiency in power distribution.

  18. On energy conservation in extended magnetohydrodynamics

    SciTech Connect

    Kimura, Keiji; Morrison, P. J.

    2014-08-15

    A systematic study of energy conservation for extended magnetohydrodynamic models that include Hall terms and electron inertia is performed. It is observed that commonly used models do not conserve energy in the ideal limit, i.e., when viscosity and resistivity are neglected. In particular, a term in the momentum equation that is often neglected is seen to be needed for conservation of energy.

  19. Saving money with energy conservation: economic analysis of conservation measures

    SciTech Connect

    Bailey, J.E.; Roller, D.A.; Moor, W.C.

    1980-01-01

    The basic tools for performing simple economic analyses of energy-conservation measures are reviewed. Energy accounting establishes energy-utilization patterns and performance goals. Directions for analyzing the utility bill are presented. Part 2 introduces ways to calculate the payback period, return on investment, and present worth of energy-conservation measures. Examples are given for reducing parking lot and indoor lighting, adding storm windows, reducing ventilation-fan running time, recycling boiler condensate, and shifting electrical-demand peak. A discussion of the inflation, depreciation, and income-tax ramifications of energy conservation is offered.

  20. Assessment of selected conservation measures for high-temperature process industries

    SciTech Connect

    Kusik, C L; Parameswaran, K; Nadkarni, R; O'Neill, J K; Malhotra, S; Hyde, R; Kinneberg, D; Fox, L; Rossetti, M

    1981-01-01

    Energy conservation projects involving high-temperature processes in various stages of development are assessed to quantify their energy conservation potential; to determine their present status of development; to identify their research and development needs and estimate the associated costs; and to determine the most effective role for the Federal government in developing these technologies. The program analyzed 25 energy conserving processes in the iron and steel, aluminium, copper, magnesium, cement, and glassmaking industries. A preliminary list of other potential energy conservation projects in these industries is also presented in the appendix. (MCW)

  1. 78 FR 12969 - Energy Conservation Program for Consumer Products: Energy Conservation Standards for Residential...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-02-26

    ...The Energy Policy and Conservation Act of 1975 (EPCA), as amended, prescribes energy conservation standards for various consumer products and certain commercial and industrial equipment, including residential water heaters. EPCA also requires the U.S. Department of Energy (DOE) to determine whether more stringent amended standards would be technologically feasible and economically justified, and would save a significant amount of energy. Accordingly, DOE established amended energy conservation standards for several classes of residential water heaters in an April 2010 final rule. Subsequent to the publication of that final rule, a number of utility companies brought forth concerns regarding the amended energy conservation standard levels for electric storage water heaters and the impact of these standards on electric thermal storage programs that utility companies administer to manage peak load. In this document, DOE proposes to establish a waiver process that will mitigate the concerns of utility companies regarding the implementation of the April 2010 standard levels by allowing for the manufacture of certain large-volume electric storage water heaters provided that they meet a set of conditions discussed in this proposed rule. The document also announces a public meeting to receive comment on the proposed waiver process and criteria for obtaining a waiver.

  2. 76 FR 26656 - Energy Conservation Program: Energy Conservation Standards for Residential Clothes Dryers and...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-05-09

    ... Part 430 RIN 1904-AA89 Energy Conservation Program: Energy Conservation Standards for Residential... adopted amended energy conservation standards for residential clothes dryers and room air conditioners. As... direct final rule for ] Energy Conservation Standards for Residential Clothes Dryers and Room Air...

  3. 78 FR 77019 - Energy Conservation Program: Energy Conservation Standards for Certain Consumer Products

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-12-20

    ... Part 430 RIN 1904-AD08 Energy Conservation Program: Energy Conservation Standards for Certain Consumer... the Energy Policy and Conservation Act of 1975 (EPCA or ``the Act'') (42 U.S.C. 6291-6309, as codified), which provides for an energy conservation program for consumer products other than automobiles, and...

  4. 77 FR 31917 - Energy Conservation Program: Energy Conservation Standards for Residential Dishwashers

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-05-30

    ... May 30, 2012 Part II Department of Energy 10 CFR Parts 429 and 430 Energy Conservation Program: Energy.... 77, No. 104 / Wednesday, May 30, 2012 / Rules and Regulations#0;#0; ] DEPARTMENT OF ENERGY 10 CFR Parts 429 and 430 RIN 1904-AC64 Energy Conservation Program: Energy Conservation Standards...

  5. Mining Industry Energy Bandwidth Study

    SciTech Connect

    none,

    2007-07-01

    The Industrial Technologies Program (ITP) relies on analytical studies to identify large energy reduction opportunities in energy-intensive industries and uses these results to guide its R&D portfolio. The energy bandwidth illustrates the total energy-saving opportunity that exists in the industry if the current processes are improved by implementing more energy-efficient practices and by using advanced technologies. This bandwidth analysis report was conducted to assist the ITP Mining R&D program in identifying energy-saving opportunities in coal, metals, and mineral mining. These opportunities were analyzed in key mining processes of blasting, dewatering, drilling, digging, ventilation, materials handling, crushing, grinding, and separations.

  6. Industrial energy-efficiency-improvement program

    SciTech Connect

    Not Available

    1980-12-01

    Progress made by industry toward attaining the voluntary 1980 energy efficiency improvement targets is reported. The mandatory reporting population has been expanded from ten original industries to include ten additional non-targeted industries and all corporations using over one trillion Btu's annually in any manufacturing industry. The ten most energy intensive industries have been involved in the reporting program since the signing of the Energy Policy and Conservation Act and as industrial energy efficiency improvement overview, based primarily on information from these industries (chemicals and allied products; primary metal industry; petroleum and coal products; stone, clay, and glass products; paper and allied products; food and kindred products; fabricated metal products; transportation equipment; machinery, except electrical; and textile mill products), is presented. Reports from industries, now required to report, are included for rubber and miscellaneous plastics; electrical and electronic equipment; lumber and wood; and tobacco products. Additional data from voluntary submissions are included for American Gas Association; American Hotel and Motel Association; General Telephone and Electronics Corporation; and American Telephone and Telegraph Company. (MCW)

  7. 36 CFR 910.36 - Energy conservation.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 36 Parks, Forests, and Public Property 3 2011-07-01 2011-07-01 false Energy conservation. 910.36... DEVELOPMENT AREA Standards Uniformly Applicable to the Development Area § 910.36 Energy conservation. All new development shall be designed to be economical in energy consumption. The Energy Guidelines of the...

  8. 36 CFR 910.36 - Energy conservation.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 36 Parks, Forests, and Public Property 3 2014-07-01 2014-07-01 false Energy conservation. 910.36... DEVELOPMENT AREA Standards Uniformly Applicable to the Development Area § 910.36 Energy conservation. All new development shall be designed to be economical in energy consumption. The Energy Guidelines of the...

  9. 36 CFR 910.36 - Energy conservation.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 36 Parks, Forests, and Public Property 3 2010-07-01 2010-07-01 false Energy conservation. 910.36... DEVELOPMENT AREA Standards Uniformly Applicable to the Development Area § 910.36 Energy conservation. All new development shall be designed to be economical in energy consumption. The Energy Guidelines of the...

  10. 36 CFR 910.36 - Energy conservation.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 36 Parks, Forests, and Public Property 3 2013-07-01 2012-07-01 true Energy conservation. 910.36... DEVELOPMENT AREA Standards Uniformly Applicable to the Development Area § 910.36 Energy conservation. All new development shall be designed to be economical in energy consumption. The Energy Guidelines of the...

  11. 36 CFR 910.36 - Energy conservation.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 36 Parks, Forests, and Public Property 3 2012-07-01 2012-07-01 false Energy conservation. 910.36... DEVELOPMENT AREA Standards Uniformly Applicable to the Development Area § 910.36 Energy conservation. All new development shall be designed to be economical in energy consumption. The Energy Guidelines of the...

  12. Institutional Manager's Guide to Energy Conservation.

    ERIC Educational Resources Information Center

    Department of Energy, Washington, DC. Office of State and Local Programs.

    The information provided in this guidebook is based on a field evaluation of grantees in the Institutional Conservation Program (ICP). The ICP, authorized by the National Energy Conservation Policy Act of 1978 and administered by the Department of Energy, provides energy audits and 50 percent matching grants for detailed energy analyses and for…

  13. Microcomputers for energy conservation in homes and other small buildings

    SciTech Connect

    Hendrick, A S

    1980-01-01

    Low cost microcomputers and related microelectric devices now make it practical to apply additional energy conserving control strategies in single-family homes and other small buildings. These conservation measures can make significant contributions toward attainment of national energy conservation objectives. Applications in space conditioning (heating, cooling, ventilation), lighting, electric demand limiting, metering of energy in various forms and for status displays are outlined. Examples of currently operating installations are described. Available equipment (such as personal computers, A/D converters, sensors, actuators, etc.) is discussed. Efforts at standard interface development and system integration are summarized. Statistics on the numbers of various building types, HVAC system types, energy consumption and energy conservation potential are presented. The structure of the HVAC controls industry is outlined. The US Department of Energy program of research, development and demonstration projects addressing efficient use of energy in buildings with new control systems is described.

  14. 10 CFR 431.326 - Energy conservation standards and their effective dates.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 3 2014-01-01 2014-01-01 false Energy conservation standards and their effective dates. 431.326 Section 431.326 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Metal Halide Lamp Ballasts and Fixtures Energy...

  15. 10 CFR 431.326 - Energy conservation standards and their effective dates.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 3 2010-01-01 2010-01-01 false Energy conservation standards and their effective dates. 431.326 Section 431.326 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Metal Halide Lamp Ballasts and Fixtures Energy...

  16. 10 CFR 431.306 - Energy conservation standards and their effective dates.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 3 2014-01-01 2014-01-01 false Energy conservation standards and their effective dates. 431.306 Section 431.306 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Walk-in Coolers and Walk-in Freezers Energy...

  17. 10 CFR 431.87 - Energy conservation standards and their effective dates.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 3 2012-01-01 2012-01-01 false Energy conservation standards and their effective dates. 431.87 Section 431.87 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Commercial Packaged Boilers Energy Efficiency Standards §...

  18. 10 CFR 431.326 - Energy conservation standards and their effective dates.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 3 2013-01-01 2013-01-01 false Energy conservation standards and their effective dates. 431.326 Section 431.326 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Metal Halide Lamp Ballasts and Fixtures Energy...

  19. 10 CFR 431.306 - Energy conservation standards and their effective dates.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 3 2011-01-01 2011-01-01 false Energy conservation standards and their effective dates. 431.306 Section 431.306 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Walk-in Coolers and Walk-in Freezers Energy...

  20. 10 CFR 431.306 - Energy conservation standards and their effective dates.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 3 2013-01-01 2013-01-01 false Energy conservation standards and their effective dates. 431.306 Section 431.306 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Walk-in Coolers and Walk-in Freezers Energy...

  1. 10 CFR 431.306 - Energy conservation standards and their effective dates.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 3 2012-01-01 2012-01-01 false Energy conservation standards and their effective dates. 431.306 Section 431.306 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Walk-in Coolers and Walk-in Freezers Energy...

  2. 10 CFR 431.87 - Energy conservation standards and their effective dates.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 3 2011-01-01 2011-01-01 false Energy conservation standards and their effective dates. 431.87 Section 431.87 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Commercial Packaged Boilers Energy Efficiency Standards §...

  3. 10 CFR 431.326 - Energy conservation standards and their effective dates.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 3 2011-01-01 2011-01-01 false Energy conservation standards and their effective dates. 431.326 Section 431.326 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Metal Halide Lamp Ballasts and Fixtures Energy...

  4. 10 CFR 431.87 - Energy conservation standards and their effective dates.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 3 2010-01-01 2010-01-01 false Energy conservation standards and their effective dates. 431.87 Section 431.87 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Commercial Packaged Boilers Energy Efficiency Standards §...

  5. 10 CFR 431.306 - Energy conservation standards and their effective dates.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 3 2010-01-01 2010-01-01 false Energy conservation standards and their effective dates. 431.306 Section 431.306 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Walk-in Coolers and Walk-in Freezers Energy...

  6. 10 CFR 431.326 - Energy conservation standards and their effective dates.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 3 2012-01-01 2012-01-01 false Energy conservation standards and their effective dates. 431.326 Section 431.326 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Metal Halide Lamp Ballasts and Fixtures Energy...

  7. 10 CFR 431.87 - Energy conservation standards and their effective dates.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 3 2013-01-01 2013-01-01 false Energy conservation standards and their effective dates. 431.87 Section 431.87 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Commercial Packaged Boilers Energy Efficiency Standards §...

  8. 10 CFR 431.87 - Energy conservation standards and their effective dates.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 3 2014-01-01 2014-01-01 false Energy conservation standards and their effective dates. 431.87 Section 431.87 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Commercial Packaged Boilers Energy Efficiency Standards §...

  9. 10 CFR 431.446 - Small electric motors energy conservation standards and their effective dates. [Reserved

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 3 2010-01-01 2010-01-01 false Small electric motors energy conservation standards and... EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Small Electric Motors Energy Conservation Standards § 431.446 Small electric motors energy conservation standards and their effective dates. ...

  10. Equity implications of utility energy conservation programs

    SciTech Connect

    Sutherland, R.J.

    1994-03-15

    This paper uses the Residential Energy Consumption Survey undertaken by the Energy Information Administration in 1990 to estimate the statistical association between household income and participation in electric utility energy conservation programs and the association between participation and the electricity consumption. The results indicate that utility rebates, energy audits, load management programs and other conservation measures tend to be undertaken at greater frequency by high income households than by low income households. Participants in conservation programs tend to occupy relatively new and energy efficient residences and undertake conservation measures other than utility programs, which suggests that utility sponsored programs are substitutes for other conservation investments. Electricity consumption during 1990 is not significantly less for households participating in utility programs than for nonparticipants, which also implies that utility conservation programs are displacing other conservation investments. Apparently, utility programs are not avoiding costs of new construction and instead are transferring wealth, particularly to high income participating households.

  11. Design of an energy conservation building

    NASA Technical Reports Server (NTRS)

    Jensen, R. N.

    1981-01-01

    The concepts in designing and predicting energy consumption in a low energy use building are summarized. The building will use less than 30,000 Btu/sq.ft./yr. of boarder energy. The building's primary energy conservation features include heavy concrete walls with external insulation, a highly insulated ceiling, and large amounts of glass for natural lighting. A solar collector air system is integrated into the south wall. Calculations for energy conservation features were performed using NASA's NECAP Energy Program.

  12. Design of an energy conservation building

    NASA Astrophysics Data System (ADS)

    Jensen, R. N.

    1981-11-01

    The concepts in designing and predicting energy consumption in a low energy use building are summarized. The building will use less than 30,000 Btu/sq.ft./yr. of boarder energy. The building's primary energy conservation features include heavy concrete walls with external insulation, a highly insulated ceiling, and large amounts of glass for natural lighting. A solar collector air system is integrated into the south wall. Calculations for energy conservation features were performed using NASA's NECAP Energy Program.

  13. Industrial Compressed Air System Energy Efficiency Guidebook.

    SciTech Connect

    United States. Bonneville Power Administration.

    1993-12-01

    Energy efficient design, operation and maintenance of compressed air systems in industrial plants can provide substantial reductions in electric power and other operational costs. This guidebook will help identify cost effective, energy efficiency opportunities in compressed air system design, re-design, operation and maintenance. The guidebook provides: (1) a broad overview of industrial compressed air systems, (2) methods for estimating compressed air consumption and projected air savings, (3) a description of applicable, generic energy conservation measures, and, (4) a review of some compressed air system demonstration projects that have taken place over the last two years. The primary audience for this guidebook includes plant maintenance supervisors, plant engineers, plant managers and others interested in energy management of industrial compressed air systems.

  14. Thermal energy storage for industrial waste heat recovery

    NASA Technical Reports Server (NTRS)

    Hoffman, H. W.; Kedl, R. J.; Duscha, R. A.

    1978-01-01

    Thermal energy storage systems designed for energy conservation through the recovery, storage, and reuse of industrial process waste heat are reviewed. Consideration is given to systems developed for primary aluminum, cement, the food processing industry, paper and pulp, and primary iron and steel. Projected waste-heat recovery and energy savings are listed for each category.

  15. Thermal energy storage for industrial waste heat recovery

    NASA Technical Reports Server (NTRS)

    Hoffman, H. W.; Kedl, R. J.; Duscha, R. A.

    1978-01-01

    Thermal energy storage systems designed for energy conservation through the recovery, storage, and reuse of industrial process waste heat are reviewed. Consideration is given to systems developed for primary aluminum, cement, the food processing industry, paper and pulp, and primary iron and steel. Projected waste-heat recovery and energy savings are listed for each category.

  16. Interference and the Law of Energy Conservation

    ERIC Educational Resources Information Center

    Drosd, Robert; Minkin, Leonid; Shapovalov, Alexander S.

    2014-01-01

    Introductory physics textbooks consider interference to be a process of redistribution of energy from the wave sources in the surrounding space resulting in constructive and destructive interferences. As one can expect, the total energy flux is conserved. However, one case of apparent non-conservation energy attracts great attention. Imagine that…

  17. 34 CFR 75.616 - Energy conservation.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 34 Education 1 2014-07-01 2014-07-01 false Energy conservation. 75.616 Section 75.616 Education... Grantee? Construction § 75.616 Energy conservation. (a) To the extent feasible, a grantee shall design and construct facilities to maximize the efficient use of energy. (b) The following standards of the...

  18. 24 CFR 200.78 - Energy conservation.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 24 Housing and Urban Development 2 2011-04-01 2011-04-01 false Energy conservation. 200.78 Section... Eligibility Requirements for Existing Projects Property Requirements § 200.78 Energy conservation. Construction, mechanical equipment, and energy and metering selections shall provide cost effective...

  19. 34 CFR 75.616 - Energy conservation.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 34 Education 1 2012-07-01 2012-07-01 false Energy conservation. 75.616 Section 75.616 Education... Grantee? Construction § 75.616 Energy conservation. (a) To the extent feasible, a grantee shall design and construct facilities to maximize the efficient use of energy. (b) The following standards of the...

  20. 34 CFR 75.616 - Energy conservation.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 34 Education 1 2011-07-01 2011-07-01 false Energy conservation. 75.616 Section 75.616 Education... Grantee? Construction § 75.616 Energy conservation. (a) To the extent feasible, a grantee shall design and construct facilities to maximize the efficient use of energy. (b) The following standards of the...

  1. 24 CFR 200.78 - Energy conservation.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 24 Housing and Urban Development 2 2013-04-01 2013-04-01 false Energy conservation. 200.78 Section... Eligibility Requirements for Existing Projects Property Requirements § 200.78 Energy conservation. Construction, mechanical equipment, and energy and metering selections shall provide cost effective...

  2. 24 CFR 200.78 - Energy conservation.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 24 Housing and Urban Development 2 2014-04-01 2014-04-01 false Energy conservation. 200.78 Section... Eligibility Requirements for Existing Projects Property Requirements § 200.78 Energy conservation. Construction, mechanical equipment, and energy and metering selections shall provide cost effective...

  3. 34 CFR 75.616 - Energy conservation.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 34 Education 1 2010-07-01 2010-07-01 false Energy conservation. 75.616 Section 75.616 Education... Grantee? Construction § 75.616 Energy conservation. (a) To the extent feasible, a grantee shall design and construct facilities to maximize the efficient use of energy. (b) The following standards of the...

  4. 24 CFR 200.78 - Energy conservation.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 24 Housing and Urban Development 2 2012-04-01 2012-04-01 false Energy conservation. 200.78 Section... Eligibility Requirements for Existing Projects Property Requirements § 200.78 Energy conservation. Construction, mechanical equipment, and energy and metering selections shall provide cost effective...

  5. 24 CFR 200.78 - Energy conservation.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 24 Housing and Urban Development 2 2010-04-01 2010-04-01 false Energy conservation. 200.78 Section... Eligibility Requirements for Existing Projects Property Requirements § 200.78 Energy conservation. Construction, mechanical equipment, and energy and metering selections shall provide cost effective...

  6. 34 CFR 75.616 - Energy conservation.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 34 Education 1 2013-07-01 2013-07-01 false Energy conservation. 75.616 Section 75.616 Education... Grantee? Construction § 75.616 Energy conservation. (a) To the extent feasible, a grantee shall design and construct facilities to maximize the efficient use of energy. (b) The following standards of the...

  7. Energy and Educational Facilities: Costs and Conservation.

    ERIC Educational Resources Information Center

    Educational Facilities Labs., Inc., New York, NY.

    An analysis of energy costs and conservation in educational facilities in the United States is presented in this report. Tables and text give dollar figures for energy expenditures in education since the first oil embargo. Energy conservation through facilities management and through facilities modification is stressed. Recommendations are…

  8. Driver Education Curriculum Guide. Energy Conservation.

    ERIC Educational Resources Information Center

    Governor's Highway Safety Program Office, Columbus, OH.

    Designed to provide high school students with information concerning energy-efficient driving, this curriculum guide covers techniques of conserving energy, efficient use of motor vehicles, safe driving techniques, and development of energy-efficient driving habits. The guide consists of six lessons: (1) Fuel Conservation: Why It Is Essential; (2)…

  9. Interference and the Law of Energy Conservation

    ERIC Educational Resources Information Center

    Drosd, Robert; Minkin, Leonid; Shapovalov, Alexander S.

    2014-01-01

    Introductory physics textbooks consider interference to be a process of redistribution of energy from the wave sources in the surrounding space resulting in constructive and destructive interferences. As one can expect, the total energy flux is conserved. However, one case of apparent non-conservation energy attracts great attention. Imagine that…

  10. Energy use and intensity in the industrial sector, 1972 - 1991

    SciTech Connect

    Belzer, D.B.

    1995-08-01

    Energy use in the United States is substantially lower now than it would have been had energy intensities not fallen after the oil price shocks of the 1970s. The United States would have consumed over 30 quadrillion Btu (QBtu) more energy in 1991 if the energy-GDP ratio (energy divided by gross domestic product) had remained at its 1972 value. Much of this improvement has stemmed from developments within the industrial sector. This paper examines industrial energy use from two perspectives. First, the contribution of the industrial sector to the decline in the overall energy-GDP ratio is estimated. Second, the components of change in conservation trends within the industrial sector are examined. This part of the analysis identifies the change in overall industrial intensity (total energy consumption/total industrial output) that is due to improvements in energy intensity at the individual industry level in comparison to various aspects of the composition of industrial output. This paper is based upon recent work conducted by Pacific Northwest Laboratory for the Office of Energy Efficiency and Alternative Fuels Policy, U.S. Department of Energy. Discussion of other end-use sectors and some additional analysis of industrial sector energy trends is found in Energy Conservation Trends - Understanding the Factors Affecting Conservation Gains and their Implications for Policy Development.

  11. 10 CFR 431.226 - Energy conservation standards and their effective dates.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 3 2014-01-01 2014-01-01 false Energy conservation standards and their effective dates. 431.226 Section 431.226 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Traffic Signal Modules and Pedestrian Modules...

  12. 10 CFR 431.226 - Energy conservation standards and their effective dates.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 3 2010-01-01 2010-01-01 false Energy conservation standards and their effective dates. 431.226 Section 431.226 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Traffic Signal Modules and Pedestrian Modules...

  13. 10 CFR 431.226 - Energy conservation standards and their effective dates.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 3 2012-01-01 2012-01-01 false Energy conservation standards and their effective dates. 431.226 Section 431.226 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Traffic Signal Modules and Pedestrian Modules...

  14. 10 CFR 431.226 - Energy conservation standards and their effective dates.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 3 2011-01-01 2011-01-01 false Energy conservation standards and their effective dates. 431.226 Section 431.226 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Traffic Signal Modules and Pedestrian Modules...

  15. 10 CFR 431.226 - Energy conservation standards and their effective dates.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 3 2013-01-01 2013-01-01 false Energy conservation standards and their effective dates. 431.226 Section 431.226 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Traffic Signal Modules and Pedestrian Modules...

  16. 75 FR 80292 - Energy Conservation Program: Energy Conservation Standards for Electric Motors

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-12-22

    ... Part 431 RIN 1904-AB71 Energy Conservation Program: Energy Conservation Standards for Electric Motors..., promulgating energy conservation standards for certain electric motors as prescribed in the Energy Policy and... motors that, due to a drafting error, are not consistent with statutory requirements. DATES: This...

  17. 78 FR 25626 - Energy Conservation Program for Consumer Products: Energy Conservation Standards for Ceiling Fans...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-05-02

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF ENERGY 10 CFR Part 430 RIN 1904-AC87 Energy Conservation Program for Consumer Products: Energy Conservation Standards... and invite comments on the Framework Document regarding energy conservation standards for...

  18. 77 FR 13026 - Energy Conservation Program: Energy Conservation Standard for Automatic Commercial Ice Makers

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-03-05

    ... products; and potential energy conservation standard levels derived from these analyses that DOE could... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF ENERGY 10 CFR Part 431 RIN 1904-AC39 Energy Conservation Program: Energy Conservation Standard for...

  19. Opportunities for energy conservation through biotechnology

    SciTech Connect

    Young, J.K.; Griffin, E.A.; Russell, J.A.

    1984-11-01

    The purpose of this study is to identify and quantify potential energy savings available through the development and application of biotechnologies. This information is required in support of ECUT research planning efforts as an aid in identifying promising areas needing further consideration and development. It is also intended as background information for a companion ECUT study being conducted by the National Academy of Science to evaluate the use of bioprocessing methods to conserve energy. Several studies have been conducted recently to assess the status and implications of the development of biotechnology. The Office of Technology Assessment (OTA) considered institutional, economic, and scientific problems and barriers. The National Science Foundation sponsored a study to examine regulatory needs for this new and expanding technology. Somewhat in contrast to these studies, this report covers principally the technical issues. It should be emphasized that the practicality of many developments in biotechnology is not evaluated solely on the basis of energy considerations. Bioprocesses must often compete with well-established coal, petroleum, and natural gas technologies. A complete evaluation of the technical, economical, and ecological impacts of the large-scale applications discussed in this report is not possible within the scope of this study. Instead, this report assesses the potential of biotechnology to save energy so that research into all aspects of implementation will be stimulated for those industries with significant energy savings potential. 92 references, 6 figures, 24 tables.

  20. Energy Industry. Industry Study, Spring 2009

    DTIC Science & Technology

    2009-01-01

    result, electric cars and plug-in hybrids pose a challenge for utilities caught unprepared for a high concentration of electric vehicles within...car can be the equivalent of running up to six plasma television sets at once — a big energy drain… Electric cars and plug-in hybrids could pose a...Chris Woodyard, “California Utility Prepares for Surge in Plug-in Electric Cars ,” USA Today, (March 2009) http://www.usatoday.com/money/industries

  1. The US textile industry: An energy perspective

    SciTech Connect

    Badin, J. S.; Lowitt, H. E.

    1988-01-01

    This report investigates the state of the US textile industry in terms of energy consumption and conservation. Specific objectives were: To update and verify energy and materials consumption data at the various process levels in 1984; to determine the potential energy savings attainable with current (1984), state-of-the-art, and future production practices and technologies (2010); and to identify new areas of research and development opportunity that will enable these potential future savings to be achieved. Results of this study concluded that in the year 2010, there is a potential to save between 34% and 53% of the energy used in current production practices, dependent on the projected technology mix. RandD needs and opportunities were identified for the industry in three categories: process modification, basic research, and improved housekeeping practices that reduce energy consumption. Potential RandD candidates for DOE involvement with the private sector were assessed and selected from the identified list.

  2. Steel Industry Energy Bandwidth Study

    SciTech Connect

    none,

    2004-10-01

    ITP conducted a study on energy use and potential savings, or "bandwidth" study, in major steelmaking processes. Intended to provide a realistic estimate of the potential amount of energy that can be saved in an industrial process, the "bandwidth" refers to the difference between the amount of energy that would be consumed in a process using commercially available technology versus the minimum amount of energy needed to achieve those same results based on the 2nd law of thermodynamics. The Steel Industry Energy Bandwidth Study (PDF 133 KB) also estimates steel industry energy use in the year 2010, and uses that value as a basis for comparison against the minimum requirements. This energy savings opportunity for 2010 will aid focus on longer term R&D.

  3. 77 FR 59712 - Energy Conservation Program: Energy Conservation Standards for Dishwashers

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-10-01

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF ENERGY 10 CFR Parts 429 and 430 RIN 1904-AC64 Energy Conservation Program: Energy Conservation Standards for Dishwashers AGENCY: Office of Energy Efficiency and Renewable Energy, Department of Energy. ACTION: Notice...

  4. 77 FR 32381 - Energy Conservation Program: Energy Conservation Standards for Residential Clothes Washers

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-05-31

    .... 77, No. 105 / Thursday May 31, 2012 / Proposed Rules#0;#0; ] DEPARTMENT OF ENERGY 10 CFR Parts 429 and 430 RIN 1904-AB90 Energy Conservation Program: Energy Conservation Standards for Residential Clothes Washers AGENCY: Office of Energy Efficiency and Renewable Energy, Department of Energy....

  5. 77 FR 10997 - Energy Conservation Program: Energy Conservation Standards for Distribution Transformers; Correction

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-02-24

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF ENERGY 10 CFR Part 431 RIN 1904-AC04 Energy Conservation Program: Energy Conservation Standards for Distribution Transformers; Correction AGENCY: Office of Energy Efficiency and Renewable Energy, Department of Energy....

  6. 78 FR 72533 - Energy Conservation Program: Energy Conservation Standards for Certain Consumer Products

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-12-03

    ... / Tuesday, December 3, 2013 / Rules and Regulations#0;#0; ] DEPARTMENT OF ENERGY 10 CFR Part 430 RIN 1904-AD08 Energy Conservation Program: Energy Conservation Standards for Certain Consumer Products AGENCY: Office of Energy Efficiency and Renewable Energy, Department of Energy. ACTION: Final rule;...

  7. 76 FR 43941 - Energy Conservation Program: Energy Conservation Standards for Direct Heating Equipment

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-07-22

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF ENERGY 10 CFR Part 430 RIN 1904-AC56 Energy Conservation Program: Energy Conservation Standards for Direct Heating Equipment AGENCY: Office of Energy Efficiency and Renewable Energy, Department of Energy. ACTION: Notice...

  8. 77 FR 31964 - Energy Conservation Program: Energy Conservation Standards for Residential Dishwashers

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-05-30

    .... 77, No. 104 / Wednesday, May 30, 2012 / Proposed Rules#0;#0; ] DEPARTMENT OF ENERGY 10 CFR Parts 429 and 430 RIN 1904-AC64 Energy Conservation Program: Energy Conservation Standards for Residential Dishwashers AGENCY: Office of Energy Efficiency and Renewable Energy, Department of Energy. ACTION:...

  9. 76 FR 57897 - Energy Conservation Program: Energy Conservation Standards for Certain External Power Supplies

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-09-19

    ... mode energy efficiency standards established in paragraph (w)(1)(i) of this section shall not apply to... RIN 1904-AB57 Energy Conservation Program: Energy Conservation Standards for Certain External Power Supplies AGENCY: Office of Energy Efficiency and Renewable Energy, Department of Energy. ACTION: Final...

  10. Conservation as an alternative energy source

    NASA Technical Reports Server (NTRS)

    Allen, D. E.

    1978-01-01

    A speech is given outlining the energy situation in the United States. It is warned that the existing energy situation cannot prevail and the time is fast running out for continued growth or even maintenance of present levels. Energy conservation measures are given as an aid to decrease U.S. energy consumption, which would allow more time to develop alternative sources of energy.

  11. Making an Energy Conservation Program Work.

    ERIC Educational Resources Information Center

    Rump, Erwin E.; Hunter, James L.

    The first step of an energy conservation program is to monitor energy consumption. A system is explained that, in order to determine which buildings are energy efficient (considering all types of energy that a building might use), monitors total energy consumption. All such consumptions can be reduced to a common denominator: Barrels of Energy…

  12. Making an Energy Conservation Program Work.

    ERIC Educational Resources Information Center

    Rump, Erwin E.; Hunter, James L.

    The first step of an energy conservation program is to monitor energy consumption. A system is explained that, in order to determine which buildings are energy efficient (considering all types of energy that a building might use), monitors total energy consumption. All such consumptions can be reduced to a common denominator: Barrels of Energy…

  13. A Graduate Course in Energy Conservation.

    ERIC Educational Resources Information Center

    Fickes, Michael

    1999-01-01

    Examines the University of Michigan's (Ann Arbor) success with a six-year energy conservation program (The Energy Star Program) offered by the Environmental Protection Agency. Describes the program's components and areas of savings the university has achieved. (GR)

  14. Energy Conservation in Agriculture. Competency Based Curriculum.

    ERIC Educational Resources Information Center

    Lawrence, Layle D.

    This competency-based energy conservation in agriculture curriculum for grades 11 and 12 is organized into seven modules. Intended for use for individualized or group instruction, the lessons should fit into existing units in courses of study rather than be presented as a single comprehensive energy conservation unit. Each module is based on from…

  15. Adoption of Energy Conservation among California Homeowners.

    ERIC Educational Resources Information Center

    Leonard-Barton, Dorothy; Rogers, Everett M.

    In spring 1977, just as California was emerging from one of the worst droughts in its history, 215 Palo Alto homeowners were interviewed about their views on energy and water conservation, and about the extent to which they had adopted 11 energy-conserving practices (ECP) in the home. The objective was to discover variables both important to…

  16. Energy Conservation Activity Packet, Grade 5.

    ERIC Educational Resources Information Center

    Bakke, Ruth

    This activity packet for grade 5 is one of a series developed in response to concern for energy conservation. It contains activities that stress an energy conservation ethic and includes many values clarification activities for grade five. The packet is divided into two parts and provides the teacher with background information, concepts and…

  17. Energy Conservation--The Global Imperative.

    ERIC Educational Resources Information Center

    Murthy, K. K.

    1978-01-01

    Presents energy as a pivotal prerequisite of highly developed economic and social structure. Discusses: (1) fossil-fuel resources and demand in various countries; (2) energy conservation; (3) measures for conservation; (4) technology transfer; and (5) considerations to be regarded internationally. (HM)

  18. Adoption of Energy Conservation among California Homeowners.

    ERIC Educational Resources Information Center

    Leonard-Barton, Dorothy; Rogers, Everett M.

    In spring 1977, just as California was emerging from one of the worst droughts in its history, 215 Palo Alto homeowners were interviewed about their views on energy and water conservation, and about the extent to which they had adopted 11 energy-conserving practices (ECP) in the home. The objective was to discover variables both important to…

  19. A Teacher's Introduction to Energy and Energy Conservation: Secondary.

    ERIC Educational Resources Information Center

    Battelle Memorial Inst., Columbus, OH. Center for Improved Education.

    This document is intended to give the secondary school teacher background information and general suggestions for teaching units and correlated learning activities related to energy and energy conservation. Sections are directed to: A Problem Shared by All, Causes, What is Energy?, Energy Sources, Searching for Solutions, Conservation: An Ethic…

  20. A Teacher's Introduction to Energy and Energy Conservation: Elementary.

    ERIC Educational Resources Information Center

    Battelle Memorial Inst., Columbus, OH. Center for Improved Education.

    This document is intended to give the elementary school teacher background information and general suggestions for teaching units and correlated learning activities related to energy and energy conservation. Sections are directed to: A Problem Shared by All, Causes, What is Energy?, Energy Sources, Searching for Solutions, Conservation: An Ethic…

  1. Energy Conservation and Historic Properties.

    ERIC Educational Resources Information Center

    Williamson, Donna

    1986-01-01

    Explains some of the finer details in the requirements and the responsibilities grantees of Institutional Conservation Program's (ICP) funding have to building preservation of historic or potentially historic buildings under the National Historic Preservation Act. (MD)

  2. Energy use and conservation trends, 1972--1986

    SciTech Connect

    Klan, M.S.; Belzer, D.B.; Marsh, S.J.; Moore, N.L.; Roop, J.M.; Sands, R.D.

    1989-02-01

    US trends in energy use and conservation since 1972 are analyzed in this report. That year represents the last year prior to significant energy price shocks. In 1986, an estimated 31.8 quads has been saved in the US compared with what consumption would have been if the energy use per dollar of GNP had continued on the same trend after 1972 as in the period 1960--1972. Actual US energy consumption in 1986 was 74.3 quads. It is clear that energy conservation is persistent and conservation investments continue to pay off even after initial energy price shocks have subsided. Separate analyses have been conducted for the major end-use sectors (residential, commercial, industrial, and transportation). Savings have been estimated in each sector, and the factors contributing to sectoral savings identified. 19 refs., 23 figs., 26 tabs.

  3. Net zero building energy conservation

    NASA Astrophysics Data System (ADS)

    Kadam, Rohit

    This research deals with energy studies performed as part of a net-zero energy study for buildings. Measured data of actual energy utilization by a building for a continuous period of 33 months was collected and studied. The peak design day on which the building consumes maximum energy was found. The averages of the energy consumption for the peak month were determined. The DOE EnergyPlus software was used to simulate the energy requirements for the building and also obtain peak energy requirements for the peak month. Alternative energy sources such as ground source heat pump, solar photovoltaic (PV) panels and day-lighting modifications were applied to redesign the energy consumption for the building towards meeting net-zero energy requirements. The present energy use by the building, DOE Energy software simulations for the building as well as the net-zero model for the building were studied. The extents of the contributions of the individual energy harvesting measures were studied. For meeting Net Zero Energy requirement, it was found that the total energy load for the building can be distributed between alternative energy methods as 5.4% to daylighting modifications, 58% to geothermal and 36.6% to solar photovoltaic panels for electricity supply and thermal energy. Thus the directions to proceed towards achieving complete net-zero energy status were identified.

  4. A review of energy use in the food industry

    SciTech Connect

    Drescher, S.; Rao, N.; Kozak, J.; Okos, M.

    1997-07-01

    The US food and kindred products industry of Standard Industry Code (SIC) 20 plays a vital role in the US economy and in foreign trade due to its large size, growth, and diverse products. The objective of this study was to conduct a review of the energy use and trends in the food industry, the fifth largest user of energy within the SIC 20 sector. Energy use in the food industry is examined by cost of fuels and electricity in all SIC 20 industries, energy use by fuel type in the top SIC 20 energy consuming industries. Examination of energy use in the food industries reveals energy intensive industries that may have the most incentive to reduce energy costs by implementing energy efficient processing methods. Wet corn milling is the most energy intensive industry in the SIC 20 sector with a 15% share of the total energy used. The beet sugar industry is second in energy use (7%), while soybean oil mills, malt beverage, and meat packing plants take about 5% each of the total energy use in this sector. In order to determine which processes in an individual plant are energy intensive or inefficient, energy analyses must be performed. Processes and unit operations in the food industry vary in complexity and energy consumption. In this report, processes are defined as procedures using one or more unit operations. The most energy consuming processes and unit operations in each SIC sector are presented. Process heating and cooling was the most energy consuming process in the food industry taking up 44.6% of the total energy input. Boiler losses accounted for an average of about 22% of energy inputs. Wet corn milling, soybean oil milling, and the dairy industry are industries that have many opportunities for energy conservation and waste minimization. These industries are illustrated and opportunities for improvements discussed.

  5. 77 FR 59719 - Energy Conservation Program: Energy Conservation Standards for Residential Clothes Washers

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-10-01

    ... From the Federal Register Online via the Government Publishing Office ] DEPARTMENT OF ENERGY 10 CFR Parts 429 and 430 RIN 1904-AB90 Energy Conservation Program: Energy Conservation Standards for Residential Clothes Washers AGENCY: Office of Energy Efficiency and Renewable Energy, Department of...

  6. 76 FR 37549 - Energy Conservation Program: Energy Conservation Standards for Residential Furnaces and...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-06-27

    .... 76, No. 123 / Monday, June 27, 2011 / Proposed Rules#0;#0; ] DEPARTMENT OF ENERGY 10 CFR Part 430 RIN 1904-AC06 Energy Conservation Program: Energy Conservation Standards for Residential Furnaces and Residential Central Air Conditioners and Heat Pumps AGENCY: Office of Energy Efficiency and Renewable Energy...

  7. 76 FR 22324 - Energy Conservation Program: Energy Conservation Standards for Residential Clothes Dryers and...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-04-21

    ... utilize forecasts of energy prices and housing starts from the AEO2010 Reference case, Low Economic Growth... energy prices and housing starts from the AEO2010 Reference case, Low Economic Growth case, and High...; ] DEPARTMENT OF ENERGY 10 CFR Part 430 RIN 1904-AA89 Energy Conservation Program: Energy Conservation Standards...

  8. 78 FR 62494 - Energy Conservation Program: Energy Conservation Standards for Ceiling Fans

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-10-22

    ... Part 430 RIN 1904-AC87 Energy Conservation Program: Energy Conservation Standards for Ceiling Fans AGENCY: Office of Energy Efficiency and Renewable Energy, Department of Energy. ACTION: Request for... standards for ceiling fans. Specifically, DOE seeks information on the interaction between ceiling fan...

  9. Technology for nature conservation: an industry perspective.

    PubMed

    Joppa, Lucas N

    2015-11-01

    Information age technology has the potential to change the game for conservation by continuously monitoring the pulse of the natural world. Whether or not it will depends on the ability of the conservation sector to build a community of practice, come together to define key technology challenges and work with a wide variety of partners to create, implement, and sustain solutions. I describe why these steps are necessary, outline the latest developments in the field and offer actionable ways forward for conservation agencies, universities, funding bodies, professional societies, and technology corporations to come together to realize the revolution that computational technologies can bring for biodiversity conservation.

  10. Transportation Energy Use and Conservation Potential

    ERIC Educational Resources Information Center

    Hirst, Eric

    1973-01-01

    Analyzes transportation energy consumption and energy intensiveness for inter-city freight and passenger traffic and urban passenger traffic with the definition of energy intensiveness as Btu per ton-mile or per passenger-mile. Indicates that public education is one of three ways to achieve the goals of energy conservation. (CC)

  11. Transportation Energy Use and Conservation Potential

    ERIC Educational Resources Information Center

    Hirst, Eric

    1973-01-01

    Analyzes transportation energy consumption and energy intensiveness for inter-city freight and passenger traffic and urban passenger traffic with the definition of energy intensiveness as Btu per ton-mile or per passenger-mile. Indicates that public education is one of three ways to achieve the goals of energy conservation. (CC)

  12. Industrial-electricity-conservation potential in the Pacific Northwest. Volume I. Final report

    SciTech Connect

    Lang, K.; Hinkle, B.K.

    1983-03-01

    The findings of an update of the assessment of industrial electricity conservation potential in the Pacific Northwest (PNW) completed in February 1982 are presented. Using a detailed process energy end use data base developed by SRC in an earlier study for BPA, conservation measures were identified for nine 4-digit SIC (Standard Industrial Classification) industries, representing the most energy intensive industries in each of the major industry groups in the PNW, in the February 1982 report. Assumptions associated with these measures were revised in response to comments from industry representatives in the PNW. An engineering-economic analysis was performed for each conservation measure. Based on the economic attractiveness of the measure relative to average hurdle rates (which are equivalent to the cost of equity) in each industry, estimates of the economic potential of each conservation measure were made. A market penetration model was then used to estimate the actual implementation of each measure over time. The conservation potential estimated for the 4-digit industries was extrapolated to the 2-digit level using an analysis of the end uses of electricity and a baseline forecast of industrial electricity requirements provided by BPA. Options for BPA and utility programs to encourage industrial electricity conservaton were identified and their costs and benefits were estimated.

  13. Conservation and Renewable Energy Program: Bibliography, 1988 edition

    SciTech Connect

    Vaughan, K.H.

    1988-04-01

    The 831 references covering the period 1980 through Feb. 1988, are arranged under the following: analysis and evaluation, building equipment, building thermal envelope systems and materials, community systems and cogeneration, residential conservation service, retrofit, advanced heat engine ceramics, alternative fuels, microemulsion fuels, industrial chemical heat pumps, materials for waste heat utilization, energy conversion and utilization materials, tribology, emergency energy conservation,inventions, electric energy systems, thermal storage, biofuels production, biotechnology, solar technology, geothermal, and continuous chromatography in multicomponent separations. An author index is included.

  14. Use of aerial thermography in Canadian energy conservation programs

    NASA Technical Reports Server (NTRS)

    Cihlar, J.; Brown, R. J.; Lawrence, G.; Barry, J. N.; James, R. B.

    1977-01-01

    Recent developments in the use of aerial thermography in energy conservation programs within Canada were summarized. Following a brief review of studies conducted during the last three years, methodologies of data acquisition, processing, analysis and interpretation was discussed. Examples of results from an industrial oriented project were presented and recommendations for future basic work were outlined.

  15. Proceedings of the second US Department of Energy environmental control symposium. Volume 2. Nuclear energy, conservation, and solar energy

    SciTech Connect

    1980-06-01

    These proceedings document the presentations given at the Second Environmental Control Symposium. Symposium presentations highlighted environmental control activities which span the entire DOE. Volume II contains papers relating to: environmental control aspects of nuclear energy use and development; nuclear waste management; renewable energy sources; transportation and building conservation (fuel economy, gasohol, building standards, and industry); and geothermal energy, power transmission, and energy storage. (DMC)

  16. Students' Knowledge of Energy and Attitudes to Energy Conservation.

    ERIC Educational Resources Information Center

    Vlahov, Stephen J.; Treagust, David F.

    1988-01-01

    Data were collected by pencil-and-paper instruments from 33 students in grade 10 in Perth, Western Australia. Data indicated that students were only slightly knowledgeable about energy and energy conservation; they had slightly positive attitudes toward energy conservation. (MNS)

  17. Industrial energy performance indicator reports

    SciTech Connect

    Munroe, V.

    1999-07-01

    The mandate for this work originated in December, 1996, when a joint meeting of federal and provincial Ministers of Energy and Environment, in addressing their responsibility to provide leadership on the Greenhouse Gases/Climate Change agenda, endorsed the following statement ({number{underscore}sign}13 of 45 initiatives launches at that time): Industrial establishments will be provided with a confidential benchmarking report on their energy efficiency progress, including how they compare to national and international averages for their sector. Information will also be provided on energy management best practices in their industries. The goal of the initiative is to use information provided on the state of energy practice to prompt, motivate, and induce companies to implement further energy efficiency measures. And one premise underlying it is that useful guidance on the state of energy practice in a company can be obtained from existing data sources, primarily the Industrial Consumption of Energy (ICE) survey and the Annual Survey of Manufacturers (ASM), both products of Statistics Canada. In addition, there are existing surveys which include energy consumption that are undertaken by associations such as the Canadian Portland Cement Association, the Canadian Chemical Producers Association, the Canadian Pulp and Paper Association, etc. Since the commitment was made, Natural Resources Canada staff have undertaken a large amount of investigative and developmental work which will be presented. Existing data from three sectors, pulp, cement and fluid milk, has been analyzed and will be delivered with draft context and energy efficiency guidance notes to the management of about 100 establishments. The author will also be able to report on how this information was received by these managers, and on the recommendations that will have been collected from industry on the more specific nature and frequency of industrial energy performance reporting desired.

  18. Energy Conservation Management in Schools.

    ERIC Educational Resources Information Center

    Bourassa, A. A.

    1980-01-01

    Outlines an energy management program to be presented at the annual meeting of the Association of School Business Officials. The program is based on the Carleton Board of Education (Ontario) energy management program. (Author/MLF)

  19. Reducing fuel usage through applications of conservation and solar energy

    SciTech Connect

    May, E. K.; Hooker, D. W.

    1980-04-01

    Solar thermal technology, coupled with aggressive conservation measures, offers the prospect of greatly reducing the dependence of industry on oil and natural gas. The near-term market for solar technology is largely in industrial processes operating at temperatures below 288/sup 0/C (550/sup 0/F). Such process heat can be supplied by the relatively unsophisticated solar equipment available today. The number and diversity of industrial plants using process heat at this temperature allows favorable matches between solar technologies and industrial processes. The problems involved with the installation and maintenance of conservation and solar equipment are similar. Both compete for scarce investment capital, and each complicates industrial operations and increases maintenance requirements. Technological innovations requiring new types of equipment and reducing the temperature requirements of industrial processes favor the introduction of solar hardware. The industrial case studies program at the Solar Energy Research Institute has examined technical, economic, and other problems facing the near-term application of solar thermal technology to provide industrial process heat. The plant engineer is in the front line of any measure to reduce energy consumption or to supplement existing fuel supplies. The conditions most favorable to the integration of solar technology are presented and illustrated with examples from actual industrial plants.

  20. Energy conservation through sealing technology

    NASA Technical Reports Server (NTRS)

    Stair, W. K.; Ludwig, L. P.

    1978-01-01

    Improvements in fluid film sealing resulting from a proposed research program could lead to an annual energy saving, on a national basis, equivalent to about 37 million bbl of oil or 0.3% of the total U.S. energy consumption. Further, the application of known sealing technology can result in an annual saving of an additional 10 million bbl of oil. The energy saving would be accomplished by reduction in process heat energy loss, reduction of frictional energy generated, and minimization of energy required to operate ancillary equipment associated with the seal system. In addition to energy saving, cost effectiveness is further enhanced by reduction in maintenance and in minimization of equipment for collecting leakage and for meeting environmental pollution standards.

  1. Energy conservation through sealing technology

    NASA Technical Reports Server (NTRS)

    Stair, W. K.; Ludwig, L. P.

    1978-01-01

    Improvements in fluid film sealing resulting from a proposed research program could lead to an annual energy saving, on a national basis, equivalent to about 37 million bbl of oil or 0.3% of the total U.S. energy consumption. Further, the application of known sealing technology can result in an annual saving of an additional 10 million bbl of oil. The energy saving would be accomplished by reduction in process heat energy loss, reduction of frictional energy generated, and minimization of energy required to operate ancillary equipment associated with the seal system. In addition to energy saving, cost effectiveness is further enhanced by reduction in maintenance and in minimization of equipment for collecting leakage and for meeting environmental pollution standards.

  2. Shipper's guide to energy conservation

    SciTech Connect

    Marien, E.J.

    1980-01-01

    Recommendations are presented for money-saving tips for the shipping industry. Tips are included for the warehousing and distribution center management; transportation management; materials management for product packaging and shipping; and deployment and management of inventories sections in a firm.

  3. (Short articles on energy conservation)

    SciTech Connect

    Hodges, L.

    1985-01-01

    The following short articles are reprinted after being published in the Tri-County Times, Slater, Iowa, by Laurent Hodges of the Iowa State University Energy Extension Service: water power; small hydroelectric plants; condensation problems (three parts); energy quiz and answers; the airtight drywall approach; benefits of natural lighting; energy and Iowa's building code; heating, water heating and cooling costs in Iowa; the cost of keeping cool; and reducing the cost of keeping cool. (DLC)

  4. Energy Conservation on Campus. Volume I. Guidelines.

    ERIC Educational Resources Information Center

    Federal Energy Administration, Washington, DC.

    The high cost of energy and the curtailment of primary preferred fuel has upset many long-standing maintenance and operation policies, forcing institutions to look quickly for ways to reduce energy usage. This booklet is designed to assist institutions of higher education in establishing or upgrading energy conservation programs. The development…

  5. Living Lightly: Energy Conservation in Housing.

    ERIC Educational Resources Information Center

    Bender, Tom

    This publication contains a series of papers which promote the concepts of energy conservation and offer safe and convenient ways of handling all aspects of our lives affected by energy without having to depend in any way on fossil fuels or nuclear power. These changes, which can be brought about in homes and in energy flows affected by the…

  6. Comparison of Teaching Methods for Energy Conservation

    NASA Astrophysics Data System (ADS)

    Horner, M. L.; Jeng, Monwhea; Lindell, Rebecca

    2007-01-01

    Three sections, taught by different instructors, of Conceptual Physics were taught energy conservation using three different techniques: traditional — no visualization, energy bar charts, and energy bars. Performance of the groups of students on final exam questions is compared and contrasted.

  7. Santa Claus and the conservation of energy

    NASA Astrophysics Data System (ADS)

    Hassani, Sadri

    2005-11-01

    This article examines an amusing application of the concept of kinetic energy. Using some rudimentary physical notions, we have analysed the energetics of the motion of Santa Claus. The results, which are quite surprising, can be of interest to high school and early college physics educators when they teach kinetic energy, and energy conservation in general.

  8. What Are Companies Doing to Conserve Energy?

    ERIC Educational Resources Information Center

    Thomas, Edward G.

    1981-01-01

    Presents survey findings from 311 members of the Administrative Management Society about steps their companies have taken to conserve energy and to make employees energy-conscious. More than half of the respondent companies have a formal energy-savings program. (Author/MLF)

  9. Energy Conservation--Hero or Villian?

    ERIC Educational Resources Information Center

    Keith, William J. B.

    1985-01-01

    Energy conservation efforts have often hermetically sealed buildings without concern for air quality. The Waterloo County Board of Education, Ontario, has installed indicators to test air quality and has installed a "clean room" for children with allergies. (MLF)

  10. Energy Conservation Guidelines for Pennsylvania Schools.

    ERIC Educational Resources Information Center

    Pennsylvania State Dept. of Education, Harrisburg.

    Energy conservation measures that can be effected in the architecture and engineering of new and existing school buildings are listed. Guidelines are also offered for general school operation and maintenance. (MLF)

  11. Energy Conservation--Hero or Villian?

    ERIC Educational Resources Information Center

    Keith, William J. B.

    1985-01-01

    Energy conservation efforts have often hermetically sealed buildings without concern for air quality. The Waterloo County Board of Education, Ontario, has installed indicators to test air quality and has installed a "clean room" for children with allergies. (MLF)

  12. Energy Conservation Through Duct Leakage Reduction

    DTIC Science & Technology

    2004-02-26

    Energy Conservation Through Duct Leakage Reduction February 26, 2004 Rich Glatt – Lindab Inc. Report Documentation Page Form ApprovedOMB No. 0704...4. TITLE AND SUBTITLE Energy Conservation Through Duct Leakage Reduction 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6...Wall – DW that installs like SW - easiest installing DW system on the market – Eliminates the need for costly flanged connections – SMACNA Leakage

  13. 78 FR 42389 - Energy Conservation Program: Energy Conservation Standards for Residential Clothes Dryers and...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-07-16

    ... environmental advocates (American Council for an Energy Efficient Economy (ACEEE), Appliance Standards Awareness..., Confidential business information, Energy conservation, Household appliances, Imports, Intergovernmental... / Tuesday, July 16, 2013 / Rules and Regulations#0;#0; ] DEPARTMENT OF ENERGY 10 CFR Part 430 RIN...

  14. 76 FR 52852 - Energy Conservation Program: Energy Conservation Standards for Residential Clothes Dryers and...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-08-24

    ... for an Energy Efficient Economy (ACEEE), Appliance Standards Awareness Project (ASAP), Natural... information, Energy conservation, Household appliances, Reporting and recordkeeping requirements, Small... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF ENERGY 10...

  15. Energy savings potential from energy-conserving irrigation systems

    SciTech Connect

    Wilfert, G.L.; Patton, W.P.; Harrer, B.J.; Clark, M.A.

    1982-11-01

    This report systematically compares, within a consistent framework, the technical and economic characteristics of energy-conserving irrigation systems with those of conventional irrigation systems and to determine total energy savings. Levelized annual costs of owning and operating both energy-conserving and conventional irrigation systems have been developed and compared for all 17 states to account for the differences in energy costs and irrigation conditions in each state. Market penetration of energy-conserving systems is assessed for those systems having lower levelized annual costs than conventional systems performing the same function. Annual energy savings were computed by matching the energy savings per system with an assumed maximum market penetration of 100 percent in those markets where the levelized annual costs of energy-conserving systems are lower than the levelized annual costs of conventional systems.

  16. How to make energy conservation pay for itself: creative financing for energy-efficency improvements

    SciTech Connect

    Klepper, M.

    1982-01-01

    This book is based on a report prepared under contract for the US Department of Housing and Urban Development to identify and evaluate alternative techniques for financing energy-efficiency improvements recommended by energy audits of 37 industrial facilities in Brooklyn. Part I describes the financing techniques available for energy conservation measures in industrial, commercial, nonprofit, municipal, single-family, and multifamily residential buildings. Part II describes the experience in applying alternative financing techniques to 37 industrial buildings. Part III outlines actions that can encourage private-sector financing of energy-efficiency measures. 70 references.

  17. A Compendium of Energy Conservation: Success Stories 90

    DOE R&D Accomplishments Database

    1990-12-01

    The Department of Energy's (DOE) Office of Conservation and Renewable Energy proudly presents this summary of some its most successful projects and activities. The projects included in this document have made significant contributions to improving energy efficiency and fuel flexibility in the United States. The energy savings that can be realized from these projects are considerable. Americans have shown an impressive ability to reduce energy consumption since 1973. Studies show that 34 quadrillion Btus (quads) of energy were saved in 1988 alone as a result of energy conservation and other factors. These savings, worth approximately $180 billion, represent more energy than the United States obtains from any other single source. The availability of new, energy-efficient technologies has been an important ingredient in achieving these savings. Federal efforts to develop and commercialize energy-saving technologies and processes are a part of the reason for this progress. Over the past 10 years, DOE has carefully invested more than $2 billion in hundreds of research and development (R&D) projects to ensure the availability of advanced technology in the marketplace. These energy-efficient projects are carried out through DOE's Office of Conservation and Renewable Energy and reflect opportunities in the three energy-consuming, end-use sectors of the economy: buildings, transportation, and industry.

  18. A compendium of energy conservation: Success stories 90

    SciTech Connect

    Not Available

    1990-12-01

    The Department of Energy's (DOE) Office of Conservation and Renewable Energy proudly presents this summary of some its most successful projects and activities. The projects included in this document have made significant contributions to improving energy efficiency and fuel flexibility in the United States. The energy savings that can be realized from these projects are considerable. Americans have shown an impressive ability to reduce energy consumption since 1973. Studies show that 34 quadrillion Btus (quads) of energy were saved in 1988 alone as a result of energy conservation and other factors. These savings, worth approximately $180 billion, represent more energy than the United States obtains from any other single source. The availability of new, energy-efficient technologies has been an important ingredient in achieving these savings. Federal efforts to develop and commercialize energy-saving technologies and processes are a part of the reason for this progress. Over the past 10 years, DOE has carefully invested more than $2 billion in hundreds of research and development (R D) projects to ensure the availability of advanced technology in the marketplace. These energy-efficient projects are carried out through DOE's Office of Conservation and Renewable Energy and reflect opportunities in the three energy-consuming, end-use sectors of the economy: buildings, transportation, and industry.

  19. Industrial Facility Combustion Energy Use

    DOE Data Explorer

    McMillan, Colin

    2016-08-01

    Facility-level industrial combustion energy use is calculated from greenhouse gas emissions data reported by large emitters (>25,000 metric tons CO2e per year) under the U.S. EPA's Greenhouse Gas Reporting Program (GHGRP, https://www.epa.gov/ghgreporting). The calculation applies EPA default emissions factors to reported fuel use by fuel type. Additional facility information is included with calculated combustion energy values, such as industry type (six-digit NAICS code), location (lat, long, zip code, county, and state), combustion unit type, and combustion unit name. Further identification of combustion energy use is provided by calculating energy end use (e.g., conventional boiler use, co-generation/CHP use, process heating, other facility support) by manufacturing NAICS code. Manufacturing facilities are matched by their NAICS code and reported fuel type with the proportion of combustion fuel energy for each end use category identified in the 2010 Energy Information Administration Manufacturing Energy Consumption Survey (MECS, http://www.eia.gov/consumption/manufacturing/data/2010/). MECS data are adjusted to account for data that were withheld or whose end use was unspecified following the procedure described in Fox, Don B., Daniel Sutter, and Jefferson W. Tester. 2011. The Thermal Spectrum of Low-Temperature Energy Use in the United States, NY: Cornell Energy Institute.

  20. 77 FR 32307 - Energy Conservation Program: Energy Conservation Standards for Residential Clothes Washers

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-05-31

    ... May 31, 2012 Part III Department of Energy 10 CFR Parts 429 and 430 Energy Conservation Program: Energy Conservation Standards for Residential Clothes Washers; Final Rule and Proposed Rule #0;#0;Federal Register / Vol. 77 , No. 105 / Thursday, May 31, 2012 / Rules and Regulations#0;#0; ] DEPARTMENT OF...

  1. 76 FR 69122 - Energy Conservation Program: Energy Conservation Standards for Certain Consumer Products...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-11-08

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF ENERGY 10 CFR Part 431 RIN 1904-AB93 Energy Conservation Program: Energy Conservation Standards for Certain Consumer Products (Dishwashers, Dehumidifiers, Microwave Ovens, and Electric and Gas Kitchen Ranges and Ovens) and...

  2. Energy Conserving Lifestyles: Final Report to the California Energy Resources Conservation and Development Commission.

    ERIC Educational Resources Information Center

    Schwartz, Seymour I.

    This report examines the broad topic of energy use and its relationship to lifestyles. The emphasis is on three energy conserving lifestyle models: (1) the rural alternative lifestyle; (2) new towns; and (3) energy conserving subdivisions in existing cities. The first chapter presents an introduction. Chapter two examines the back-to-the-land…

  3. 75 FR 21981 - Energy Conservation Program: Energy Conservation Standards for Residential Water Heaters, Direct...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-04-27

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF ENERGY 10 CFR Part 430 RIN 1904-AA90 Energy Conservation Program: Energy Conservation Standards for Residential Water Heaters, Direct Heating Equipment, and Pool Heaters Correction In rule document 2010-7611 beginning...

  4. A new mechanism for energy conservation technology services

    SciTech Connect

    Yan, Feng

    1996-12-31

    In the ninth-five year plan of China, the socialist market economy model will be developed. In the stage of transferring from planning economy to market economy, the energy conservation technology services industry in China has met new challenges. Over the past ten to fifteen years, there has developed a new mechanism for financing energy efficiency investments in market economies. The process is simple. After inspecting an enterprise or an entity for energy saving opportunities, an Energy Service Company (ESCO) which business aimed at making money will review the recommended energy conservation opportunities with the enterprise or the entity (user) and implement those measures acceptable to the user at no front end cost to the user. The ESCO then guarantees that the energy savings will cover the cost of the capital renovations using the Performance Contracting.

  5. Energy saver for industrial lighting

    NASA Technical Reports Server (NTRS)

    Arline, J.; Lapalme, J.; Warren, C.

    1980-01-01

    Electronic controller switches lights on or off in response to amount of sunlight available. Is application in offices and industrial installations where electrical energy is wasted by using artificial light in sunlit areas. Device utilizes electronic monitor that varies artificial lighting according to amount of sunlight in given area.

  6. Energy conservation in alcohol production

    SciTech Connect

    Standiford, F.C.; Weimer, L.D.

    1983-01-01

    Explains how substantial energy savings can be achieved by integrating the distillation system into the slop concentrating evaporator of a fermentation plant. Presents diagram of a fully integrated system. Advantages of a combined system include considerable improvement in the energy balance of a fuel alcohol plant; concentration of alcohol in the feed becomes much less important; improvement in the recovery of alcohol in the feed; and it enables simpler stripping of alcohol from the fermented liquor. Such systems will reduce the net extra heat required for distillation from one-half to one-third that normally needed. The energy required for slop evaporation is slightly less than normally needed by a highly efficient vapor compression evaporator operating alone.

  7. The Energy Conservation Curriculum Model.

    ERIC Educational Resources Information Center

    Haveman, Jacqueline E.; O'Connell, Kathryn

    Described is a model which responds to the need for a systematic, conceptual framework for understanding energy. The specific vehicle for enhancing this understanding for the model is postsecondary adult vocational education. The model is intended to assist educators in designing and developing curricula tailored to the needs and interests of…

  8. Energy conservation in large buildings

    NASA Astrophysics Data System (ADS)

    Rosenfeld, A.; Hafemeister, D.

    1985-11-01

    As energy prices rise, newly energy aware designers use better tools and technology to create energy efficient buildings. Thus the U.S. office stock (average age 20 years) uses 250 kBTU/ft2 of resource energy, but the guzzler of 1972 uses 500 (up×2), and the 1986 ASHRAE standards call for 100-125 (less than 25% of their 1972 ancestors). Surprisingly, the first real cost of these efficient buildings has not risen since 1972. Scaling laws are used to calculate heat gains and losses of buildings to obtain the ΔT(free) which can be as large as 15-30 °C (30-60 °F) for large buildings. The net thermal demand and thermal time constants are determined for the Swedish Thermodeck buildings which need essentially no heat in the winter and no chillers in summer. The BECA and other data bases for large buildings are discussed. Off-peak cooling for large buildings is analyzed in terms of saving peak-electrical power. By downsizing chillers and using cheaper, off-peak power, cost-effective thermal storage in new commercial buildings can reduce U.S. peak power demands by 10-20 GW in 15 years. A further potential of about 40 GW is available from adopting partial thermal storage and more efficient air conditioners in existing buildings.

  9. Energy Conservation Education Resource Guide.

    ERIC Educational Resources Information Center

    Priddy, Michael D., Ed.; And Others

    Although designed as a resource for teachers in the Guilford County (North Carolina) School System, this guide contains information applicable to most K-12 curricula. There are five color-coded sections, each devoted to specific grade levels: K-3, 4-6, 4-9, 10-12. The Appendices include field trip possibilities, an energy use checklist, and…

  10. Energy conservation and constants variation.

    NASA Astrophysics Data System (ADS)

    Kraiselburd, L.; Miller Bertolami, M. M.; Sisterna, P.; Vucetich, H.

    If fundamental constants vary, the internal energy of macroscopic bodies should change. This should produce observable effects. It is shown that those effects can produce upper bounds on the variation of much lower than those coming from Eötvös experiments.

  11. Focus On: Energy Conservation Practices in Schools.

    ERIC Educational Resources Information Center

    Massachusetts State Dept. of Education, Boston.

    This pamphlet briefly describes 23 effective energy conservation programs in Massachusetts schools today. These practices range from changes in classroom lighting fixtures to complete heating system redesign. Each program represents an effort by school systems to adapt to changing energy needs and available resources. Each entry describes the…

  12. Focus On: Energy Conservation Practices in Schools.

    ERIC Educational Resources Information Center

    Massachusetts State Dept. of Education, Boston.

    This pamphlet briefly describes 23 effective energy conservation programs in Massachusetts schools today. These practices range from changes in classroom lighting fixtures to complete heating system redesign. Each program represents an effort by school systems to adapt to changing energy needs and available resources. Each entry describes the…

  13. Energy Conservation Through Rational Architecture and Planning

    ERIC Educational Resources Information Center

    Brubaker, C. William

    1976-01-01

    Buildings can be designed in harmony with the natural environment, and new techniques of "active" solar design exist to collect and use solar energy for space heating and cooling. Preservation and reuse of existing buildings and neighborhoods are other ways to conserve energy. (Author/MLF)

  14. ENCORE: Energy Conservation Resources for Education.

    ERIC Educational Resources Information Center

    Texas A and M Univ., College Station. Dept. of Industrial Education.

    This publication contains the energy education materials for middle schools from project ENCORE (Energy Conservation Resources for Education). These modules were originally field tested in Texas schools during the 1976-77 academic year. The revised materials in this publication are organized into four major units and thirteen chapters. The…

  15. Energy Conservation Through Rational Architecture and Planning

    ERIC Educational Resources Information Center

    Brubaker, C. William

    1976-01-01

    Buildings can be designed in harmony with the natural environment, and new techniques of "active" solar design exist to collect and use solar energy for space heating and cooling. Preservation and reuse of existing buildings and neighborhoods are other ways to conserve energy. (Author/MLF)

  16. Social psychological aspects of energy conservation

    NASA Astrophysics Data System (ADS)

    Aronson, Elliot; Yates, Suzanne

    1985-11-01

    Although some increases in the adoption of energy-efficient practices have been noted, only a small fraction of the potential savings are being realized, perhaps because human behavior is too complex for existing economic models. The rational-economic model is able to predict behavior in many situations, but it has limitations. To design effective public policy, the social, cognitive, and personal forces, that in addition to the economic realities define the situation, must be understood. This chapter examines one aspect of current energy conservation policy, the home energy audit program mandated by the Residential Conservation Service, and attempts to show how existing social psychological research might be beneficially applied.

  17. 77 FR 17364 - Inadmissibility of Consumer Products and Industrial Equipment Noncompliant With Applicable Energy...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-03-26

    ... Inadmissibility of Consumer Products and Industrial Equipment Noncompliant With Applicable Energy Conservation or... and industrial equipment deemed noncompliant with the Energy Policy and Conservation Act of 1975 (EPCA... United States of certain consumer products and industrial equipment that do not meet applicable labeling...

  18. 78 FR 40388 - Inadmissibility of Consumer Products and Industrial Equipment Noncompliant With Applicable Energy...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-07-05

    ... Inadmissibility of Consumer Products and Industrial Equipment Noncompliant With Applicable Energy Conservation or... refuse admission into the customs territory of the United States to consumer products and industrial... Conservation Program for Certain Industrial Equipment, a program covering industrial equipment. Section 6302(a...

  19. Opportunities for energy conservation in the developing countries

    SciTech Connect

    Koshel, P.; Allen, E.L.; Cecelski, E.; Dougher, R.; Ring, L.

    1981-03-01

    Energy problems faced by developing countries are explored and opportunities for saving energy and for using fuels other than petroleum in the modern sector are assessed. Specific resources assessed include oil and gas, coal, hydropower, and traditional fuels. Trends in commercial energy consumption by the developing countries are assessed and the domestic fuel resources of these countries are examined. Patterns of commercial energy use in several LDCs including Sri Lanka, Haiti, India, Kenya, Egypt, the Phillippines, the Republic of Korea, and Brazil are examined. Sri Lanka and Haiti are the subjects for case studies reported in the appendixes. Opportunities for conservation in the modern sector, which include most industrial activities, transportation, and electric power generation as well as some agricultural activities and large residential and commercial buildings, are discussed. The concluding section explores policies which might be initiated by LDC governments to encourage energy conservation. (MCW)

  20. The economic importance of tribology in the conservation of energy

    NASA Astrophysics Data System (ADS)

    Jost, H. P.

    Considerations related to a developing shortage of energy and rising energy costs have led to a number of approaches to decrease energy consumption by conservative measures. In this connection, it appears that possibilities to save energy by reducing the losses due to wear and friction have not sufficiently been taken into account. On the basis of data in a U.S. report, it is concluded that strategies for energy conservation through tribology would make savings of $40 billion a year possible. A description is presented of specific approaches for achieving these savings. Attention is given to direct savings, indirect savings, savings obtainable without research and development work, savings possible by suitable development work regarding the design of motor vehicles, developments concerning power generation and turbines, and savings through improved performance in manufacturing and process industries.

  1. California Industrial Energy Efficiency Potential

    SciTech Connect

    Coito, Fred; Worrell, Ernst; Price, Lynn; Masanet, Eric; RafaelFriedmann; Rufo, Mike

    2005-06-01

    This paper presents an overview of the modeling approach andhighlights key findings of a California industrial energy efficiencypotential study. In addition to providing estimates of technical andeconomic potential, the study examines achievable program potential undervarious program-funding scenarios. The focus is on electricity andnatural gas savings for manufacturing in the service territories ofCalifornia's investor-owned utilities (IOUs). The assessment is conductedby industry type and by end use. Both crosscutting technologies andindustry-specific process measures are examined. Measure penetration intothe marketplace is modeled as a function of customer awareness, measurecost effectiveness, and perceived market barriers. Data for the studycomes from a variety of sources, including: utility billing records, theEnergy Information Association (EIA) Manufacturing Energy ConsumptionSurvey (MECS), state-sponsored avoided cost studies, energy efficiencyprogram filings, and technology savings and cost data developed throughLawrence Berkeley National Laboratory (LBNL). The study identifies 1,706GWh and 47 Mth (million therms) per year of achievable potential over thenext twelve years under recent levels of program expenditures, accountingfor 5.2 percent of industrial electricity consumption and 1.3 percent ofindustrial natural gas consumption. These estimates grow to 2,748 GWh and192 Mth per year if all cost-effective and achievable opportunities arepursued. Key industrial electricity end uses, in terms of energy savingspotential, include compressed air and pumping systems that combine toaccount for about half of the total achievable potential estimates. Fornatural gas, savings are concentrated in the boiler and process heatingend uses, accounting for over 99 percent to total achievablepotential.

  2. Reliable aerial thermography for energy conservation

    NASA Technical Reports Server (NTRS)

    Jack, J. R.; Bowman, R. L.

    1981-01-01

    A method for energy conservation, the aerial thermography survey, is discussed. It locates sources of energy losses and wasteful energy management practices. An operational map is presented for clear sky conditions. The map outlines the key environmental conditions conductive to obtaining reliable aerial thermography. The map is developed from defined visual and heat loss discrimination criteria which are quantized based on flat roof heat transfer calculations.

  3. Industrial Energy Efficiency Practices in Indonesia: Lesson Learned from Astra Green Energy (AGen) Award

    NASA Astrophysics Data System (ADS)

    Telaga, A. S.; Hartanto, I. D.

    2017-03-01

    Many countries have used award system to promote energy efficiency practices in industry. The award system has been found to have significant impact to increase energy conservation and sustainability adoption in companies. Astra International (AI) as a holding company of more than 200 companies also organised Astra green energy (AGen) award to all affiliated companies (AFFCO) in Astra group. The event has been used to share energy efficiency best practices among AFFCO in Astra group. AFFCOs of Astra International are among the biggest and the leader in their industrial sectors Therefore, analyses from AFFO’s energy efficiency case studies represents current practices in Indonesia industrial sectors. Analyses are divided into industry, building, and renewable energy. The results from analyses found that AFFCOs already aware of energy conservation and have implemented projects to promote energy efficiency. However, the AFFCOs do not optimally use monitoring data for energy reduction.

  4. 75 FR 12144 - Energy Conservation Program for Consumer Products: Energy Conservation Standards for Residential...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-03-15

    ... Conservation Standards for Residential Furnaces AGENCY: Office of Energy Efficiency and Renewable Energy... for certain residential furnaces, and the analytical approach, models, and tools that DOE is using to... furnaces, which is available at:...

  5. 78 FR 20842 - Energy Conservation Program: Energy Conservation Standards for Residential Clothes Dryers and...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-04-08

    ... Efficient Economy (ACEEE), Appliance Standards Awareness Project (ASAP), Natural Resources Defense Council... procedure, Confidential business information, Energy conservation, Household appliances, Imports... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF ENERGY 10...

  6. Characterizing emerging industrial technologies in energy models

    SciTech Connect

    Laitner, John A.; Worrell, Ernst; Galitsky, Christina; Hanson, Donald A.

    2003-07-29

    Conservation supply curves are a common tool in economic analysis. As such, they provide an important opportunity to include a non-linear representation of technology and technological change in economy-wide models. Because supply curves are closely related to production isoquants, we explore the possibility of using bottom-up technology assessments to inform top-down representations of energy models of the U.S. economy. Based on a recent report by LBNL and ACEEE on emerging industrial technologies within the United States, we have constructed a supply curve for 54 such technologies for the year 2015. Each of the selected technologies has been assessed with respect to energy efficiency characteristics, likely energy savings by 2015, economics, and environmental performance, as well as needs for further development or implementation of the technology. The technical potential for primary energy savings of the 54 identified technologies is equal to 3.54 Quads, or 8.4 percent of the assume d2015 industrial energy consumption. Based on the supply curve, assuming a discount rate of 15 percent and 2015 prices as forecasted in the Annual Energy Outlook2002, we estimate the economic potential to be 2.66 Quads - or 6.3 percent of the assumed forecast consumption for 2015. In addition, we further estimate how much these industrial technologies might contribute to standard reference case projections, and how much additional energy savings might be available assuming a different mix of policies and incentives. Finally, we review the prospects for integrating the findings of this and similar studies into standard economic models. Although further work needs to be completed to provide the necessary link between supply curves and production isoquants, it is hoped that this link will be a useful starting point for discussion with developers of energy-economic models.

  7. Diffusion of energy-conserving innovations

    SciTech Connect

    Darley, J.M.; Beniger, J.R.

    1981-01-01

    We suggest that people's decisions to adopt energy-conserving processes and products is a specific instance of the decision to adopt an innovation. Drawing on previous research, we postulate a set of eight dimensions by means of which energy-conserving innovations are evaluated. We further argue that people's perceptions of an innovation's characteristics, on these dimensions, determine their decisions to adopt that innovation. Again in keeping with past research, we suggest that information that determines people's perceptions of innovations is more likely to be transmitted via social networks rather than mass media or other channels of communication. Taken together, these propositions form a theory of the adoption and diffusion of energy-conserving innovations. A research program is sketched that would provide support for the theory.

  8. 78 FR 77607 - Energy Conservation Program for Consumer Products: Energy Conservation Standards for Residential...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-12-24

    ... Standards for Residential Furnace Fans AGENCY: Office of Energy Efficiency and Renewable Energy, Department... conservation standards for residential furnace fans, with a comment period that was scheduled to close December... conservation standards for residential furnace fans published on October 25, 2013 (78 FR 64067) is extended...

  9. 75 FR 17036 - Energy Conservation Program: Energy Conservation Standards for Small Electric Motors; Correction

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-04-05

    ... rule regarding the energy conservation standards for small electric motors, which was published on... energy conservation standards for small electric motors. Due to a drafting error, an incorrect compliance... electric motor that requires listing or certification by a nationally recognized safety testing...

  10. Energy Conservation Curriculum for Secondary and Post-Secondary Students. Module 11: Economics of Energy Conservation.

    ERIC Educational Resources Information Center

    Navarro Coll., Corsicana, TX.

    This module is the eleventh in a series of eleven modules in an energy conservation curriculum for secondary and postsecondary vocational students. It is designed for use by itself or as part of a sequence of four modules on energy conservation in building construction and operation (see also modules 8, 9, and 10). The objective of this module is…

  11. 78 FR 51463 - Energy Conservation Program: Energy Conservation Standards for Metal Halide Lamp Fixtures

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-08-20

    ..., framework documents, public meeting attendee lists and transcripts, comments, and other supporting documents... Approaches to Energy Conservation Standards: System Approaches 1. Lamp-Ballast System 2. Fixtures Systems... Competition f. Need for National Energy Conservation g. Other Factors 2. Rebuttable Presumption V. Methodology...

  12. 10 CFR 436.104 - Energy conservation measures and standards.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 3 2010-01-01 2010-01-01 false Energy conservation measures and standards. 436.104 Section 436.104 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION FEDERAL ENERGY MANAGEMENT AND PLANNING PROGRAMS Guidelines for General Operations Plans § 436.104 Energy conservation measures and standards....

  13. 10 CFR 436.104 - Energy conservation measures and standards.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 3 2014-01-01 2014-01-01 false Energy conservation measures and standards. 436.104 Section 436.104 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION FEDERAL ENERGY MANAGEMENT AND PLANNING PROGRAMS Guidelines for General Operations Plans § 436.104 Energy conservation measures and standards....

  14. 10 CFR 436.104 - Energy conservation measures and standards.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 3 2012-01-01 2012-01-01 false Energy conservation measures and standards. 436.104 Section 436.104 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION FEDERAL ENERGY MANAGEMENT AND PLANNING PROGRAMS Guidelines for General Operations Plans § 436.104 Energy conservation measures and standards....

  15. 10 CFR 436.104 - Energy conservation measures and standards.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 3 2013-01-01 2013-01-01 false Energy conservation measures and standards. 436.104 Section 436.104 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION FEDERAL ENERGY MANAGEMENT AND PLANNING PROGRAMS Guidelines for General Operations Plans § 436.104 Energy conservation measures and standards....

  16. 10 CFR 436.104 - Energy conservation measures and standards.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 3 2011-01-01 2011-01-01 false Energy conservation measures and standards. 436.104 Section 436.104 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION FEDERAL ENERGY MANAGEMENT AND PLANNING PROGRAMS Guidelines for General Operations Plans § 436.104 Energy conservation measures and standards....

  17. Energy and other resource conservation within urbanizing areas

    NASA Astrophysics Data System (ADS)

    Rowe, Peter G.

    1982-05-01

    The reported research seeks to answer several questions regarding energy conservation within urbanizing areas. As a practical matter, to what extent can dependence upon exhaustible resources be reduced? Can these reductions be achieved without severely impairing social well-being and environmental quality? And, what seem to be the prevailing institutional constraints limiting energy conservation within urbanizing areas? The study area was the proposed “downtown” of The Woodlands, a new town north of Houston, Texas. Two plans were developed for this area. In one, no particular attempt was made to conserve energy (conventional plan), while in the other, energy conservation was a primary consideration (conservation plan). For both plans, estimates were made of energy consumption within buildings, in the transportation sector, and in the actual production of building materials themselves (embodied energy). In addition, economic and environmental analyses were performed, including investigation of other resource issues such as water supply, solid waste disposal, stormwater management, and atmospheric emissions. Alternative on-site power systems were also investigated. Within the bounds of economic feasibility and development practicality, it was found that application of energy-conserving methods could yield annual energy savings of as much as 23%, and reduce dependence on prime fuels by 30%. Adverse economic effects on consumers were found to be minimal and environmental quality could be sustained. The major institutional constraints appeared to be those associated with traditional property ownership and with the use of common property resources. The resistance to change of everyday practices in land development and building industries also seemed to constrain potential applications.

  18. Energy conservation for dynamical black holes.

    PubMed

    Hayward, Sean A

    2004-12-17

    An energy conservation law is described, expressing the increase in mass-energy of a general black hole in terms of the energy densities of the infalling matter and gravitational radiation. This first law of black-hole dynamics describes how a black hole grows and is regular in the limit where it ceases to grow. An effective gravitational-radiation energy tensor is obtained, providing measures of both ingoing and outgoing, transverse and longitudinal gravitational radiation on and near a black hole. Corresponding energy-tensor forms of the first law involve a preferred time vector which plays the role of a stationary Killing vector. Identifying an energy flux, vanishing if and only if the horizon is null, allows a division into energy supply and work terms. The energy supply can be expressed in terms of area increase and a newly defined surface gravity, yielding a Gibbs-like equation.

  19. Identification of cost effective energy conservation measures

    NASA Technical Reports Server (NTRS)

    Bierenbaum, H. S.; Boggs, W. H.

    1978-01-01

    In addition to a successful program of readily implemented conservation actions for reducing building energy consumption at Kennedy Space Center, recent detailed analyses have identified further substantial savings for buildings representative of technical facilities designed when energy costs were low. The techniques employed for determination of these energy savings consisted of facility configuration analysis, power and lighting measurements, detailed computer simulations and simulation verifications. Use of these methods resulted in identification of projected energy savings as large as $330,000 a year (approximately two year break-even period) in a single building. Application of these techniques to other commercial buildings is discussed

  20. Energy conservation in ice skating rinks

    SciTech Connect

    Dietrich, B.K.; McAvoy, T.J.

    1980-01-01

    An economic and energy analysis of ice rinks was made to examine the areas in which energy could be profitably conserved. The areas where new equipment could make a major reduction in energy use are: the use of waste heat for space heating, the installation of a low emissivity false ceiling to reduce radiant heat, the use of a load cycling controller to reduce refrigeration costs, and the installation of more efficient lighting systems. Changes in rink operating procedure that could cut energy use are: higher refrigerant temperatures, thinner ice, the use of colder resurfacing water, turning the compressors and pumps off at night, and reducing ventilation.

  1. Identification of cost effective energy conservation measures

    NASA Technical Reports Server (NTRS)

    Bierenbaum, H. S.; Boggs, W. H.

    1978-01-01

    In addition to a successful program of readily implemented conservation actions for reducing building energy consumption at Kennedy Space Center, recent detailed analyses have identified further substantial savings for buildings representative of technical facilities designed when energy costs were low. The techniques employed for determination of these energy savings consisted of facility configuration analysis, power and lighting measurements, detailed computer simulations and simulation verifications. Use of these methods resulted in identification of projected energy savings as large as $330,000 a year (approximately two year break-even period) in a single building. Application of these techniques to other commercial buildings is discussed

  2. Angular momentum conservation in dipolar energy transfer.

    PubMed

    Guo, Dong; Knight, Troy E; McCusker, James K

    2011-12-23

    Conservation of angular momentum is a familiar tenet in science but has seldom been invoked to understand (or predict) chemical processes. We have developed a general formalism based on Wigner's original ideas concerning angular momentum conservation to interpret the photo-induced reactivity of two molecular donor-acceptor assemblies with physical properties synthetically tailored to facilitate intramolecular energy transfer. Steady-state and time-resolved spectroscopic data establishing excited-state energy transfer from a rhenium(I)-based charge-transfer state to a chromium(III) acceptor can be fully accounted for by Förster theory, whereas the corresponding cobalt(III) adduct does not undergo an analogous reaction despite having a larger cross-section for dipolar coupling. Because this pronounced difference in reactivity is easily explained within the context of the angular momentum conservation model, this relatively simple construct may provide a means for systematizing a broad range of chemical reactions.

  3. How energy conservation limits our measurements.

    PubMed

    Navascués, Miguel; Popescu, Sandu

    2014-04-11

    Observations in quantum mechanics are subject to complex restrictions arising from the principle of energy conservation. Determining such restrictions, however, has been so far an elusive task, and only partial results are known. In this Letter, we discuss how constraints on the energy spectrum of a measurement device translate into limitations on the measurements which we can effect on a target system with a nonconstant energy operator. We provide efficient algorithms to characterize such limitations and, in case the target is a two-level quantum system, we quantify them exactly. Our Letter, thus, identifies the boundaries between what is possible or impossible to measure, i.e., between what we can see or not, when energy conservation is at stake.

  4. 14 CFR 152.609 - Energy conservation practices.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 14 Aeronautics and Space 3 2012-01-01 2012-01-01 false Energy conservation practices. 152.609... (CONTINUED) AIRPORTS AIRPORT AID PROGRAM Energy Conservation in Airport Aid Program § 152.609 Energy conservation practices. Each sponsor shall require fuel and energy conservation practices in the operation...

  5. 14 CFR 152.609 - Energy conservation practices.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 14 Aeronautics and Space 3 2013-01-01 2013-01-01 false Energy conservation practices. 152.609... (CONTINUED) AIRPORTS AIRPORT AID PROGRAM Energy Conservation in Airport Aid Program § 152.609 Energy conservation practices. Each sponsor shall require fuel and energy conservation practices in the operation...

  6. 14 CFR 152.609 - Energy conservation practices.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 3 2014-01-01 2014-01-01 false Energy conservation practices. 152.609... (CONTINUED) AIRPORTS AIRPORT AID PROGRAM Energy Conservation in Airport Aid Program § 152.609 Energy conservation practices. Each sponsor shall require fuel and energy conservation practices in the operation...

  7. 14 CFR 152.609 - Energy conservation practices.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Energy conservation practices. 152.609... (CONTINUED) AIRPORTS AIRPORT AID PROGRAM Energy Conservation in Airport Aid Program § 152.609 Energy conservation practices. Each sponsor shall require fuel and energy conservation practices in the operation...

  8. 14 CFR 152.609 - Energy conservation practices.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 3 2011-01-01 2011-01-01 false Energy conservation practices. 152.609... (CONTINUED) AIRPORTS AIRPORT AID PROGRAM Energy Conservation in Airport Aid Program § 152.609 Energy conservation practices. Each sponsor shall require fuel and energy conservation practices in the operation...

  9. Energy Implementation Centers: A Method of Speeding the Use of Solar Energy and Other Energy Conserving Technologies. Final Report.

    ERIC Educational Resources Information Center

    Hirshberg, A. S.; And Others

    This report examines the role of implementation centers as a vehicle for speeding the use of solar energy and energy conservation. It covers a study of previous building industry innovations; a brief review of the diffusion of innovation literature, including several case studies; identification of the solar thermal application process and…

  10. Energy Implementation Centers: A Method of Speeding the Use of Solar Energy and Other Energy Conserving Technologies. Final Report.

    ERIC Educational Resources Information Center

    Hirshberg, A. S.; And Others

    This report examines the role of implementation centers as a vehicle for speeding the use of solar energy and energy conservation. It covers a study of previous building industry innovations; a brief review of the diffusion of innovation literature, including several case studies; identification of the solar thermal application process and…

  11. Industrial energy efficiency opportunities in Ukraine

    SciTech Connect

    Somasundaram, S.; Parker, S.; Evans, M.; Brown, D.

    1999-07-01

    As part of the energy assistance program to help Ukraine shut down the Chornobyl nuclear reactors, The US Department of Energy (DOE) asked the Pacific Northwest National Laboratory (PNNL) to identify and appraise industrial energy efficiency projects in Ukraine. The industrial sector currently accounts for over 60% of Ukraine's energy consumption. Most industrial enterprises in Ukraine use energy very inefficiently because the former Communist system provided few incentives to conserve energy or even account for its cost. Since 1994, however, the country's energy prices have risen close to world levels, and Ukraine finds itself saddled with very high energy costs. The Ukrainian Government is also under pressure to lower natural gas imports and reduce the country's trade imbalance with Russia. As a result, incentives to save energy in Ukraine are now great, and the market for energy efficiency products is growing. The Ukrainian Government estimates that this market will generate from $700 million to $1 billion worth of new product sales by the year 2000. However, few industrial enterprises have the money necessary for large-scale energy efficiency improvements. Therefore, one of the main goals of this project is to help the most promising enterprises obtain financing for energy efficiency projects form a variety of financial institutions, or through new, creative financing mechanisms. The project has involved several site visits to different industrial plants in Ukraine to gather preliminary data on the facilities. Most of these plants are in the process of being privatized or have been recently privatized and are financially sound. Among the plants visited have been a glass manufacturing plant, a coke-chemical plant, a paper mill, an alumina plant, a tire factory, a food processing plant, an iron mine, a metallurgical firm, and a steel cable factory. Following a preliminary analysis of the site-specific data obtained during the first visit, a limited number of

  12. Energy conservation economics by investment equivalent

    SciTech Connect

    Larson, R.J.

    1985-08-01

    Investment Equivalents of Energy Savings is a quick and easy technique for companies to assess investment options. Energy conservation proposals must produce an acceptable return before a company will allocate capital. The author describes how the technique operates and how it produces results which allow design engineers, supervisors, and others to choose between alternatives. A hypothetical case provides figures to illustrate how the system develops evaluation criteria and ranks possible solutions. 2 tables.

  13. Energy Conservation: Implementing an Effective Campus Program.

    ERIC Educational Resources Information Center

    Marsee, Jeff

    After reviewing the physical plant environment and temperature control equipment at Eastfield College (Texas), this paper explains how redirected efforts toward energy conservation can result in important cost/usage savings. Electricity billing rates are explained to provide a stronger usage strategy for cost effectiveness. Two methods of reducing…

  14. Home Energy Conservation Training Project. Final Report.

    ERIC Educational Resources Information Center

    West Virginia Univ., Morgantown. Coll. of Human Resources and Education.

    Described is a project designed to present four training sessions for community specialists representing outreach interests such as cooperative extension, senior citizens organizations, and welfare agencies. Training consists of instruction in contemporary knowledge, skills, and methods of home energy conservation, and in how to teach others to…

  15. Thermal Comfort and Strategies for Energy Conservation.

    ERIC Educational Resources Information Center

    Rohles, Frederick H., Jr.

    1981-01-01

    Discusses studies in thermal comfort which served as the basis for the comfort standard. Examines seven variables in the human response to the thermal environment in terms of the ways in which they can be modified to conserve energy. (Author/MK)

  16. The Urgent Need for Energy Conservation

    ERIC Educational Resources Information Center

    Abelson, Philip H.

    1973-01-01

    Discusses the serious nature of the Energy Crisis'' and the dependence of the United States economy on imported hydrocarbons. Urges immediate action to alleviate the situation by increasing domestic production of oil, substituting coal for oil, and by conservation, especially in the use of automobile fuel. (JR)

  17. Low-Tech Energy Conservation for Schools.

    ERIC Educational Resources Information Center

    Stein, Benjamin

    The American Institute of Architects National Committee on Architecture for Education presents this guide which addresses methods of energy conservation in school buildings with simple design, construction, and equipment-control technology so that trained and creative people can take over functions normally done by machinery and automated…

  18. Energy conservation, using remote thermal scanning

    NASA Technical Reports Server (NTRS)

    Bowman, R. L.; Jack, J. R.

    1978-01-01

    Airborne thermal infrared scans and thermal maps utilized in NASA's energy conservation program have proven to be efficient cost-effective method for identifying heat losses from building roofs and heating system distribution lines. Method employs commercially available equipment in highly developed way.

  19. Thermal Comfort and Strategies for Energy Conservation.

    ERIC Educational Resources Information Center

    Rohles, Frederick H., Jr.

    1981-01-01

    Discusses studies in thermal comfort which served as the basis for the comfort standard. Examines seven variables in the human response to the thermal environment in terms of the ways in which they can be modified to conserve energy. (Author/MK)

  20. The Urgent Need for Energy Conservation

    ERIC Educational Resources Information Center

    Abelson, Philip H.

    1973-01-01

    Discusses the serious nature of the Energy Crisis'' and the dependence of the United States economy on imported hydrocarbons. Urges immediate action to alleviate the situation by increasing domestic production of oil, substituting coal for oil, and by conservation, especially in the use of automobile fuel. (JR)

  1. Energy Conservation Featured in Illinois High School

    ERIC Educational Resources Information Center

    Modern Schools, 1976

    1976-01-01

    The William Fremd High School in Palatine, Illinois, scheduled to open in 1977, is being built with energy conservation uppermost in mind. In this system, 70 heat pumps will heat and cool 300,000 square feet of educational facilities. (Author/MLF)

  2. Energy conservation, using remote thermal scanning

    NASA Technical Reports Server (NTRS)

    Bowman, R. L.; Jack, J. R.

    1978-01-01

    Airborne thermal infrared scans and thermal maps utilized in NASA's energy conservation program have proven to be efficient cost-effective method for identifying heat losses from building roofs and heating system distribution lines. Method employs commercially available equipment in highly developed way.

  3. Energy and materials flows in the iron and steel industry

    SciTech Connect

    Sparrow, F.T.

    1983-06-01

    Past energy-consumption trends and future energy-conservation opportunities are investigated for the nation's iron and steel industry. It is estimated that, in 1980, the industry directly consumed approximately 2.46 x 10/sup 15/ Btu of energy (roughly 3% of total US energy consumption) to produce 111 million tons of raw steel and to ship 84 million tons of steel products. Direct plus indirect consumption is estimated to be about 3.1 x 10/sup 15/ Btu. Of the set of conservation technologies identified, most are judged to be ready for commercialization if and when the industry's capital formation and profitability problems are solved and the gradual predicted increase in energy prices reduces the payback periods to acceptable levels.

  4. Demonstration of an advanced liquid treatment system for industrial wastes and energy conservation: Al Turi sanitary landfill leachate treatment plant. Final report

    SciTech Connect

    1994-09-01

    Landfill leachate, collected at lined sanitary landfills, is usually hauled to off-site sewage treatment plants for disposal. These sewage treatment plants are characteristically aerobic treatment systems designed to treat moderate strength wastewater; however, transportation off-site and aerobic treatment both use energy. The project investigated the on-site anaerobic treatment (anaerobic treatment systems usually produce methane gas) of leachate, designed to enhance methane gas production and eliminate having to haul leachate off-site. The methane gas would heat various buildings on the landfill; energy used by the landfilling operation would decrease. The project`s objective was to design and construct an on-site treatment plant to treat the leachate produced by the landfill and to compare the system`s operation to transportation and treatment off-site at a nearby sewage treatment plant. Bench-scale tests were done on the leachate to determine design. Using this design, the system was constructed and used to treat leachate. Costs and effluent quality were monitored.

  5. Energy Conservation Guidebook : to be Used in Conjunction with the Energy Conservation Policies October 1993.

    SciTech Connect

    United States. Bonneville Power Administration.

    1993-11-01

    This guidebook is an instrument for implementing BPA`s Energy Conservation Policies established through the concensus of the four Area Office Managers and the Assistant Administrator for the Office of Energy Resources. As technical support for, and elaboration of, the Energy Conservation Policies, the Guidebook follows the format of the Policies themselves. The Guidebook tackles each section of the Policies in order, again assigning roles and responsibilities where appropriate, enlarging on policy issues and, where appropriate, outlining data considerations. The sections in order are: conservation load reduction, cost-effectiveness limits, BA management targets, consumer contributions, utility contribution, program verification, and program evaluation.

  6. High-bay Lighting Energy Conservation Measures

    SciTech Connect

    Ian Metzger, Jesse Dean

    2010-12-31

    This software requires inputs of simple high-bay lighting system inventory information and calculates the energy and cost benefits of various retrofit opportunities. This tool includes energy conservation measures for: 1000 Watt to 750 Watt High-pressure Sodium lighting retrofit, 400 Watt to 360 Watt High Pressure Sodium lighting retrofit, High Intensity Discharge to T5 lighting retrofit, High Intensity Discharge to T8 lighting retrofit, and Daylighting. This tool calculates energy savings, demand reduction, cost savings, building life cycle costs including: simple payback, discounted payback, net-present value, and savings to investment ratio. In addition this tool also displays the environmental benefits of a project.

  7. Low-bay Lighting Energy Conservation Measures

    SciTech Connect

    Ian Metzger, Jesse Dean

    2010-12-31

    This software requires inputs of simple low-bay lighting system inventory information and calculates the energy and cost benefits of various retrofit opportunities. This tool includes energy conservation measures for: Low-wattage T8 lighting retrofit, T12 to T8 lighting retrofit, LED Exit signs retrofit, Occupancy sensors, Screw-in lighting retrofit, and central lighting controls. This tool calculates energy savings, demand reduction, cooling load reduction, heating load increases, cost savings, building life cycle costs including: Simple payback, discounted payback, net-present value, and savings to investment ratio. In addition this tool also displays the environmental benefits of a project.

  8. Ames Energy: A Consumer's Guide to Energy Conservation.

    ERIC Educational Resources Information Center

    Women's Support Network, Inc., Santa Rosa, CA.

    Presented is an annotated bibliography of energy-related materials for the consumer. Materials (which include books, videotape recordings, magazines, pamphlets, and other media) are arranged by subject area. These area include: (1) earth sheltered buildings; (2) fuels; (3) general (including general energy conservation and insulation); (4) heat…

  9. Ames Energy: A Consumer's Guide to Energy Conservation.

    ERIC Educational Resources Information Center

    Women's Support Network, Inc., Santa Rosa, CA.

    Presented is an annotated bibliography of energy-related materials for the consumer. Materials (which include books, videotape recordings, magazines, pamphlets, and other media) are arranged by subject area. These area include: (1) earth sheltered buildings; (2) fuels; (3) general (including general energy conservation and insulation); (4) heat…

  10. Solar energy, conservation, and rental housing

    SciTech Connect

    Levine, A.; Raab, J.

    1981-03-01

    Renters must pay the majority of energy costs either directly or in their rents. They have limited financial and legal abilities to make improvements necessary to increase substantially the energy efficiency of rental housing. This report discusses the problem of how to increase investments in energy conservation and solar energy devices for rental housing, which constitutes over one-third of US housing. As background, this report characterizes the rental-housing market, including owners' decision-making criteria. Federal, state, and local policies that affect energy-related investments in rental housing are described. Programs are divided into five major categories: (1) programs for tenants, (2) financial incentives for owners, (3) leasing of solar energy equipment, (4) mediation between tenants and landlords, and (5) regulation. The report concludes that energy and conservation programs aimed at the residential sector must disaggregate owner-occupied housing from rental housing for maximum effect. No one program is advocated since local rental-housing markets differ substantially. For improvements greater than no-cost or low-cost items, programs must be directed at rental-housing owners and not only at tenants.

  11. Energy-conserving development regulations: current practice

    SciTech Connect

    Not Available

    1980-05-01

    Almost every aspect of land development has an effect on energy use, from minute architectural details to broad considerations of urban density. Energy-efficiency depends in part on how development is planned and carried out. Conventional development regulations, such as zoning ordinances and subdivision regulations, can be adapted in many ways to promote energy conservation at the community level. This report is about energy-efficient site and neighborhood design. It examines recent experiences of local governments that have adopted new development regulations or amended existing ones to promote energy conservation, more efficient generation and distribution, or a switch to alternative, renewable sources. Although much has been written in recent years about saving energy through community design, actual experience in applying these new ideas is still limited. To date, most communities have focused their efforts on studying the problem, documenting consumption patterns, and writing reports and plans. Only a handful have amended their land-use controls for the express purpose of saving energy. This study identifies 13 of these pioneering communities, after undertaking a survey of over 1400 local, regional, and state planning agencies. It takes a look at their experiences, to learn what has been done, how well it has worked, and what problems have been encountered.

  12. Environmental Conservation. The Oil and Gas Industries, Volume One.

    ERIC Educational Resources Information Center

    National Petroleum Council, Washington, DC.

    Prepared in response to a Department of the Interior request, this report is a comprehensive study of environmental conservation problems as they relate to or have impact on the petroleum industry. It contains the general comments and conclusions of The National Petroleum Council based on an analysis of detailed data. For presentation of key…

  13. Environmental Conservation. The Oil and Gas Industries, Volume One.

    ERIC Educational Resources Information Center

    National Petroleum Council, Washington, DC.

    Prepared in response to a Department of the Interior request, this report is a comprehensive study of environmental conservation problems as they relate to or have impact on the petroleum industry. It contains the general comments and conclusions of The National Petroleum Council based on an analysis of detailed data. For presentation of key…

  14. Study of methods to stimulate private investment in hospital energy conservation. Final report

    SciTech Connect

    Morrow, M.J.; Schooler, G.J.; Maturi, R.A.; Raichel, T.M.

    1984-01-01

    Hospital energy conservation can address two societal concerns - persistent health care cost inflation and excessive energy use. While hospitals can achieve some energy savings by implementing no-cost or low-cost changes in building operations and maintenance, substantial additional savings can be achieved by investing in energy conservation capital projects. In recent years, non-profit hospitals have received assistance in financing these capital projects from the Department of Energy schools and hospitals matching grants program. The DOE program, however, has experienced substantial funding cutbacks. To continue widespread implementation of hospital energy conservation capital projects, greater private sector investment will be required. The Blue Cross and Blue Shield Association and DOE conceived the Study of Methods to Stimulate Private Investment in Hospital Energy Conservation to facilitate increased hospital energy conservation investment through private sector initiatives. The focus of the study was energy conservation investment by private, non-profit hospitals. These hospitals constitute the largest segment of the hospital industry. Many of the findings about energy conservation investment in private, non-profit hospitals also apply to government-owned and investor-owned hospitals. The major findings are as follows: A major opportunity exists to achieve widespread hospital energy conservation investment over the next five to ten years; private sector financing arrangements represent a means of realizing this opportunity; several factors presently inhibit hospitals and investors from entering into energy conservation financing transactions; and state and federal initiatives can help create an environment more conducive to private financing of hospital energy conservation.

  15. Process models: analytical tools for managing industrial energy systems

    SciTech Connect

    Howe, S O; Pilati, D A; Balzer, C; Sparrow, F T

    1980-01-01

    How the process models developed at BNL are used to analyze industrial energy systems is described and illustrated. Following a brief overview of the industry modeling program, the general methodology of process modeling is discussed. The discussion highlights the important concepts, contents, inputs, and outputs of a typical process model. A model of the US pulp and paper industry is then discussed as a specific application of process modeling methodology. Applications addressed with the case study results include projections of energy demand, conservation technology assessment, energy-related tax policies, and sensitivity analysis. A subsequent discussion of these results supports the conclusion that industry process models are versatile and powerful tools for managing industrial energy systems.

  16. International industrial sector energy efficiency policies

    SciTech Connect

    Price, Lynn; Worrell, Ernst

    2000-01-01

    Over 40 percent of the energy consumed globally is used in the industrial sector. In China, this sector consumes an even larger proportion, reaching nearly 70 percent in 1997. A variety of energy efficiency policies and programs have been instituted in both industrialized and developing countries in an effort to improve the energy efficiency of the industrial sector. There are very few comprehensive evaluations of these industrial sector energy efficiency policies; however a number of recent workshops and conferences have included a focus on these policies. Three important meetings were the International Energy Agency's Industrial Energy Efficiency: Policies and Programs Conference in 1994, Industrial Energy Efficiency Policies: Understanding Success and Failure - A Workshop Organized by the International Network for Energy Demand Analysis in the Industrial Sector in 1998, and the American Council for an Energy-Efficient Economy's 1999 Summer Study on Energy Efficiency in Industry. Man y articles from these meetings are included as attachments to this memo. This paper provides a brief description of each of seven categories of individual industrial energy efficiency policies and programs, discuss which industrial sectors or types of equipment they apply to, and provide references for articles and reports that discuss each policy or program in more detail. We begin with mandatory-type policies and move to more voluntary-type policies. We then provide a brief description of four integrated industrial energy efficiency policies and provide references for articles and reports that describe these policies in greater detail.

  17. Energy conservation - A test for scattering approximations

    NASA Technical Reports Server (NTRS)

    Acquista, C.; Holland, A. C.

    1980-01-01

    The roles of the extinction theorem and energy conservation in obtaining the scattering and absorption cross sections for several light scattering approximations are explored. It is shown that the Rayleigh, Rayleigh-Gans, anomalous diffraction, geometrical optics, and Shifrin approximations all lead to reasonable values of the cross sections, while the modified Mie approximation does not. Further examination of the modified Mie approximation for the ensembles of nonspherical particles reveals additional problems with that method.

  18. Energy conservation - A test for scattering approximations

    NASA Technical Reports Server (NTRS)

    Acquista, C.; Holland, A. C.

    1980-01-01

    The roles of the extinction theorem and energy conservation in obtaining the scattering and absorption cross sections for several light scattering approximations are explored. It is shown that the Rayleigh, Rayleigh-Gans, anomalous diffraction, geometrical optics, and Shifrin approximations all lead to reasonable values of the cross sections, while the modified Mie approximation does not. Further examination of the modified Mie approximation for the ensembles of nonspherical particles reveals additional problems with that method.

  19. Solar energy and conservation technologies for Caribbean Tourist Facilities (CTF)

    NASA Astrophysics Data System (ADS)

    The primary objectives of the Caribbean Tourist Facilities (CTF) project were to develop and publish materials and conduct workshops on solar energy and conservation technologies that would directly address the needs and interests of tourist facilities in the Caribbean basin. Past contacts with the Caribbean and US tourist industries indicated that decision-makers remained unconvinced that renewable technologies could have a significant impact on development and operation costs or that renewable energy products and services suited their needs. In order to assure that the materials and programs developed were responsive to the Caribbean tourist industry and U.S. conservation and renewable energy industries, marketing research with potential end users and the organizations and associations that serve those users was included as an underlying task in the project. The tasks outlined in the CTF Statement of Work included conference planning, gathering of field data, development of educational materials, and conduct of workshop(s). In addition to providing a chronicle of the fulfillment of those tasks, this final report includes suggestions for distributing the documents developed during the project, venues for future workshops, and other technology transfer and market influence strategies.

  20. Solar energy and conservation technologies for Caribbean Tourist Facilities (CTF)

    SciTech Connect

    Not Available

    1991-01-01

    The primary objectives of the Caribbean Tourist Facilities (CTF) project were to develop and publish materials and conduct workshops on solar energy and conservation technologies that would directly address the needs and interests of tourist facilities in the Caribbean basin. Past contacts with the Caribbean and US tourist industries indicated that decision-makers remained unconvinced that renewable technologies could have a significant impact on development and operation costs or that renewable energy products and services suited their needs. In order to assure that the materials and programs developed were responsive to the Caribbean tourist industry and US conservation and renewable energy industries, marketing research with potential end users and the organizations and associations that serve those users was included as an underlying task in the project. The tasks outlined in the CTF Statement of Work included conference planning, gathering of field data, development of educational materials, and conduct of workshop(s). In addition to providing a chronicle of the fulfillment of those tasks, this final report includes suggestions for distributing the documents developed during the project, venues for future workshops, and other technology transfer and market influence strategies. 3 refs.

  1. Industrial Energy Efficiency and Climate Change Mitigation

    SciTech Connect

    Worrell, Ernst; Bernstein, Lenny; Roy, Joyashree; Price, Lynn; de la Rue du Can, Stephane; Harnisch, Jochen

    2009-02-02

    Industry contributes directly and indirectly (through consumed electricity) about 37% of the global greenhouse gas emissions, of which over 80% is from energy use. Total energy-related emissions, which were 9.9 GtCO2 in 2004, have grown by 65% since 1971. Even so, industry has almost continuously improved its energy efficiency over the past decades. In the near future, energy efficiency is potentially the most important and cost-effective means for mitigating greenhouse gas emissions from industry. This paper discusses the potential contribution of industrial energy efficiency technologies and policies to reduce energy use and greenhouse gas emissions to 2030.

  2. Energy conservation and the transportation sector

    NASA Technical Reports Server (NTRS)

    1975-01-01

    The present status of the energy implications of the transportation systems in the United States was illustrated, with primary emphasis on the technologies and methods for achieving a substantial reduction in the associated energy price (approximately 25% of the nation's energy is consumed directly in the operation of these systems). These technologies may be classified as follows: (1) improvement of system efficiency (system operations or technological), (2) substitution for scarce energy resources (electrification, alternate fuels, use of man power, recycling), (3) curtailment of end use (managed population growth rate, education of citizenry, alternatives to personal transportation, improved urban planning, reduced travel incentives). Examples and illustrations were given. Thirty-four actions were chosen on the basis of a preliminary filtering process with the objective of: (1) demonstrating a methodological approach to arrive at logical and consistent conservation action packages, (2) recommending a viable and supportable specific set of actions.

  3. Energy conservation and the transportation sector

    NASA Technical Reports Server (NTRS)

    1975-01-01

    The present status of the energy implications of the transportation systems in the United States was illustrated, with primary emphasis on the technologies and methods for achieving a substantial reduction in the associated energy price (approximately 25% of the nation's energy is consumed directly in the operation of these systems). These technologies may be classified as follows: (1) improvement of system efficiency (system operations or technological), (2) substitution for scarce energy resources (electrification, alternate fuels, use of man power, recycling), (3) curtailment of end use (managed population growth rate, education of citizenry, alternatives to personal transportation, improved urban planning, reduced travel incentives). Examples and illustrations were given. Thirty-four actions were chosen on the basis of a preliminary filtering process with the objective of: (1) demonstrating a methodological approach to arrive at logical and consistent conservation action packages, (2) recommending a viable and supportable specific set of actions.

  4. Energy Conservation Guide for Industrial Processes.

    DTIC Science & Technology

    1981-01-01

    concentration in the surrounding area, so that ventilation may be minimized by careful trial and measurement. Interlocking of cover and exhaust fan is...to interlock tank exhaust with tank covers, to ventilate only when the cover is open. The use of hollow plastic spheres or other plastic configurations...ACTIVITY LOCATION: FL BAY " 5. AUTOMATIC CONTROLS Temperature . .. . . . . Process Timers . . . . . Electric Demand Interlocks

  5. 77 FR 43723 - Energy Efficiency and Conservation Loan Program

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-07-26

    ... demand side management (DSM), EE Programs and energy conservation programs. This proposed rulemaking... matter, energy efficiency investment includes the eligible purposes of DSM and energy conservation as... implement DSM, EE Programs and conservation programs, and on-grid and off-grid renewable energy...

  6. 24 CFR 965.306 - Energy conservation equipment and practices.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 24 Housing and Urban Development 4 2012-04-01 2012-04-01 false Energy conservation equipment and... URBAN DEVELOPMENT PHA-OWNED OR LEASED PROJECTS-GENERAL PROVISIONS Energy Audits and Energy Conservation Measures § 965.306 Energy conservation equipment and practices. In purchasing original or, when...

  7. 24 CFR 965.306 - Energy conservation equipment and practices.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 24 Housing and Urban Development 4 2013-04-01 2013-04-01 false Energy conservation equipment and... URBAN DEVELOPMENT PHA-OWNED OR LEASED PROJECTS-GENERAL PROVISIONS Energy Audits and Energy Conservation Measures § 965.306 Energy conservation equipment and practices. In purchasing original or, when...

  8. 24 CFR 965.306 - Energy conservation equipment and practices.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false Energy conservation equipment and... URBAN DEVELOPMENT PHA-OWNED OR LEASED PROJECTS-GENERAL PROVISIONS Energy Audits and Energy Conservation Measures § 965.306 Energy conservation equipment and practices. In purchasing original or, when...

  9. 24 CFR 965.306 - Energy conservation equipment and practices.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 24 Housing and Urban Development 4 2014-04-01 2014-04-01 false Energy conservation equipment and... URBAN DEVELOPMENT PHA-OWNED OR LEASED PROJECTS-GENERAL PROVISIONS Energy Audits and Energy Conservation Measures § 965.306 Energy conservation equipment and practices. In purchasing original or, when...

  10. 24 CFR 965.306 - Energy conservation equipment and practices.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 24 Housing and Urban Development 4 2011-04-01 2011-04-01 false Energy conservation equipment and... URBAN DEVELOPMENT PHA-OWNED OR LEASED PROJECTS-GENERAL PROVISIONS Energy Audits and Energy Conservation Measures § 965.306 Energy conservation equipment and practices. In purchasing original or, when...

  11. Supporting industries energy and environmental profile

    SciTech Connect

    None, None

    2005-09-21

    As part of its Industries of the Future strategy, the Industrial Technologies Program within the U.S. Department of Energy’s (DOE) Office of Energy Efficiency and Renewable Energy works with energy-intensive industries to improve efficiency, reduce waste, and increase productivity. These seven Industries of the Future (IOFs) – aluminum, chemicals, forest products, glass, metal casting, mining, and steel – rely on several other so-called “supporting industries” to supply materials and processes necessary to the products that the IOFs create. The supporting industries, in many cases, also provide great opportunities for realizing energy efficiency gains in IOF processes.

  12. Restructuring the energy industry: A financial perspective

    SciTech Connect

    Abrams, W.A.

    1995-12-31

    This paper present eight tables summarizing financial aspects of energy industry restructuring. Historical, current, and future business characteristics of energy industries are outlined. Projections of industry characteristics are listed for the next five years and for the 21st century. Future independent power procedures related to financial aspects are also outlined. 8 tabs.

  13. Restructuring Energy Industries: Lessons from Natural Gas

    EIA Publications

    1997-01-01

    For the past 20 years, the natural gas industry has been undergoing a restructuring similar to the transition now confronting the electric power industry. This article presents a summary of some of these gas industry experiences to provide a basis for some insights into energy industry restructuring.

  14. Energy conservation and energy decentralization: issues and prospects

    SciTech Connect

    Levine, M.D.; Craig, P.P.

    1980-01-01

    Views are presented of the seemingly paradoxical nature and irrationality of the energy system and the decisions that determine its evolution. An economic approach to energy decisions, while widely espoused and generally believed to be the underpinning of our system, appears not to be functioning in very-important areas. The result is enormous waste of economic and intangible resources to produce energy that could be effectively replaced by energy conservation at low costs. This inefficiency in the economic system is, in the author's judgment, far greater than is recognized either by the public or by experts. They feel it has led to an over-investment in centralized energy systems and has discouraged the use of decentralized systems that could contribute significantly in the near term to a lessening of our energy problems. There are some signs that the situation is changing, albeit rather slowly. High prices and the widespread recognition of the seriousness of our energy problems have contributed to an increasing involvement of individuals in energy decisions profoundly affecting their future. To achieve an evolution of the energy system in which decentralized technologies (and, in the near term, particularly technologies that improve the efficiency of energy use) play an important role, the government must act forcefully. This action needs to recognize and be responsive to the powerful discriminatory effect of the economic system, as it is presently constituted, against investments in energy conservation.

  15. ENERGY CONSERVATION AND ENERGY DECENTRALIZATION: ISSUES AND PROSPECTS

    SciTech Connect

    Levine, Mark D.; Craig, Paul P.

    1980-01-01

    We have presented views of the seemingly paradoxical nature and irrationality of the energy system and the decisions that determine its evolution. An economic approach to energy decisions, while widely espoused and generally believed to be the underpinning of our system. appears not to be functioning in very important areas. The result is enormous waste of economic and intangible resources to produce energy that could be effectively replaced by energy conservation at low costs. This inefficiency in the economic system is, in our judgment. far greater than is recognized either by the public or by 'experts.' It has led to an over-investment in centralized energy systems and has discouraged the use of decentralized systems that could contribute significantly in the near term to a lessening of our energy problems. There are some signs that the situation is changing. albeit rather slowly. High prices and the widespread recognition of the seriousness of our energy problems have contributed to an increasing involvement of individuals in energy decisions profoundly affecting their future. To achieve an evolution of the energy system in which decentralized technologies (and, in the near term, particularly technologies that improve the efficiency of energy use) play an important role, the government must act forcefully. This action needs to recognize and be responsive to the powerful discriminatory effect of the economic system, as it is presently constituted, against investments in energy conservation.

  16. 78 FR 62988 - Energy Conservation Program: Energy Conservation Standards for Certain Consumer Products and...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-10-23

    ... Energy, Department of Energy. ACTION: Final rule; technical amendment. SUMMARY: The recently enacted... to certain consumer products and commercial and industrial equipment. The amendments include new and... Department of Energy (DOE) is incorporating into its regulations in this technical amendment. DOE is...

  17. Sweet Grass Elementary School: A Study in Energy Conservation. Energy Conservation: School Design.

    ERIC Educational Resources Information Center

    Edmonton Public Schools (Alberta).

    The results of building a new school in Edmonton (Alberta) in accordance with energy efficient principles are described in this report, the third and last in a series describing three projects utilizing different approaches to energy conservation. The Sweet Grass Elementary School project consisted in designing, building, and monitoring an energy…

  18. 76 FR 67037 - Energy Conservation Program: Energy Conservation Standards for Residential Furnaces and...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-10-31

    ...The U.S. Department of Energy (DOE) published a direct final rule to establish amended energy conservation standards for residential furnaces and residential central air conditioners and heat pumps in the Federal Register on June 27, 2011. DOE has determined that the adverse comments received in response to the direct final rule do not provide a reasonable basis for withdrawing the direct......

  19. Sweet Grass Elementary School: A Study in Energy Conservation. Energy Conservation: School Design.

    ERIC Educational Resources Information Center

    Edmonton Public Schools (Alberta).

    The results of building a new school in Edmonton (Alberta) in accordance with energy efficient principles are described in this report, the third and last in a series describing three projects utilizing different approaches to energy conservation. The Sweet Grass Elementary School project consisted in designing, building, and monitoring an energy…

  20. HOSPITAL VENTILATION STANDARDS AND ENERGY CONSERVATION: A REVIEW OF GOVERNMENTAL AND PRIVATE AGENCY ENERGY CONSERVATION INITIATIVES

    SciTech Connect

    Banks, Robert S.; Rainer, David

    1980-03-01

    This report presents the results of a recent research project originally concerned with review of governmental initiatives for changes to hospital design and operation standards at both the federal and state levels. However. it quickly became apparent that concern with energy conservation was not impacting hospital environmental standards, especially at the state level, irrespective of the energy implications. Consequently, the study was redirected to consider all energy conservation initiatives directed toward design and operating practices unique to the hospital environment. The scope was limited to agency programs (i.e., not undertaken at the initiative of individual hospitals), applicable to non-federal public and private hospitals.

  1. 75 FR 27227 - Energy Conservation Program: Energy Conservation Standards for Residential Central Air...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-05-14

    ...On March 25, 2010, the U.S. Department of Energy (DOE) announced that it would hold a public meeting to discuss and receive comments on the product classes that DOE plans to analyze for purposes of establishing energy conservation standards for residential central air conditioners and heat pumps; the analytical framework, models, and tools that DOE is using to evaluate amended standards for these products; the results of preliminary analyses performed by DOE for these products; and potential energy conservation standard levels derived from these analyses that DOE could consider for these products. DOE also encouraged written comments on these subjects. This document announces an extension of the time period for submitting comments on the energy conservation standards notice of public meeting (NOPM) and availability of the preliminary technical support document for central air conditioners and heat pumps. The comment period is extended to May 17, 2010.

  2. Conservation and solar energy program: congressional budget request, FY 1982

    SciTech Connect

    1981-01-01

    Funding summaries are presented for the Conservation and Solar Energy Program funding information and program overview on energy conservation (Volume 7 of 7, DOE/CR-0011/2) are included for the Buildings and Community Systems, Industrial, Transportation; State and Local, Multi-Sector, Energy Impact Assistance, and Residential/Commercial retrofit programs. Funding information and program overviews on solar technology (Volume 2 of 7, DOE/CR-011/2) are included for Active and Passive Solar Heating and Cooling, Photovoltaics Energy Systems, Solar Thermal Power Systems, Biomass Energy Systems, Wind Energy Conversion Systems, Ocean Systems, Solar International Activities, Solar Information Systems, SERI Facility, MX-RES, Program Direction, and Alcohol Fuels programs. Information and overviews on energy production, demonstration, and distribution (Volume 6 of 7, DOE/CR-0011/2) are given for the solar program. A funding summary and a program overview are included for electrochemical and physical and chemical storage systems as appearing in DOE/CR-0011/2, Volume 3 of 7. Relevant tabulated data from the FY 1981. Request to the Congress are presented for Supplementals, Rescissions, and Deferrals. (MCW)

  3. 1999 annual progress report -- Energy conservation team

    SciTech Connect

    Chalk, S.

    1999-10-19

    This report highlights progress achieved during FY 1999 under the Light-duty Fuels Utilization R and D Program. The program is comprised of two elements: the Advanced Petroleum-Based APB Fuels Program which focused on developing and testing advanced fuels for use with compression-ignition direct-injection (CIDI) engines and fuel cells and the Alternative Fuels Program which focused on Natural gas and natural gas derived fuels. The report contains 17 summaries of industry and National Laboratory projects. Fuel efficient vehicles with very low emissions are essential to meet the challenges of climate change, energy security, and improved air quality. The authors anticipate cooperative efforts with the auto and energy industries to develop new and innovative technologies that will be used to make advanced transportation vehicles that are fuel efficient, clean, and safe.

  4. Regional Urban Planning for Energy Conservation: Alternative Approaches.

    ERIC Educational Resources Information Center

    Manohar, Shri

    1982-01-01

    Discusses the role of urban and regional planners in redesigning land use patterns which reinforce energy conservation while preserving satisfying living conditions. A model for evaluating energy conservation planning alternatives for Perth, Australia is described. (AM)

  5. Regional Urban Planning for Energy Conservation: Alternative Approaches.

    ERIC Educational Resources Information Center

    Manohar, Shri

    1982-01-01

    Discusses the role of urban and regional planners in redesigning land use patterns which reinforce energy conservation while preserving satisfying living conditions. A model for evaluating energy conservation planning alternatives for Perth, Australia is described. (AM)

  6. Aircraft Energy Conservation during Airport Ground Operations

    DTIC Science & Technology

    1982-03-01

    CONSIDERATIONS H-3 AIRPORT CAPACITY H-6 PASSENGER CONVENIENCE H-7 NOISE AND AIR QUALITY LEVELS H-7 AIRLINE/AIRPORT REVENUES H-8 APPENDIX I...34 CAPACITY" ... LOGAN" LOGAN" TION PRO- GRAM" USEFUL FOR: ENERGY N Y 1 M M CAPACITY N N M Y AIR QUALITY N Y M M NOISE N Y M M TIME Y N... life and surfaces maintained for faster taxi speeds. AREAS FOR ADDITIONAL STUDY The ORI investigation of fuel conservation practices and procedures

  7. Industrial energy management: it takes more than energy to make it work

    SciTech Connect

    Not Available

    1980-03-01

    Automated controls, equipment modifications, insulation retrofits, and efficient light sources can all curb energy consumption at an industrial facility. Successful industrial energy management requires more than technology - psychology is just as important. How best to use technology and psychology is illustrated and described using the techniques applied at the Ingersoll-Rand Company's Phillipsburg plant. Record keeping is an important part of any conservation effort.

  8. Energy-conserving site design: case study, The Woodlands, Texas

    SciTech Connect

    Swanson, M

    1980-03-01

    The Woodlands is a HUD Title VII New Town located north of Houston. It includes 22,000 acres and the plan for the new town consists of 6 residential villages, a town center called the Metro Center and several additional tracts, such as the Trade Center for larger-scale industrial use. Each village is to be structured around one large and several supporting neighborhood centers. Ultimate population is planned to be 150,000. Included in this report are sections on background, team structure and organization, methodological considerations, the conventional and energy-conserving plan, constraints to implementation, and general conclusions and next phases.

  9. 41 CFR 101-25.112 - Energy conservation policy.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 41 Public Contracts and Property Management 2 2011-07-01 2007-07-01 true Energy conservation...-General Policies § 101-25.112 Energy conservation policy. (a) Agency officials responsible for procurement..., which has been established pursuant to Public Law 94-163, Energy Policy and Conservation Act. (b)...

  10. 41 CFR 101-25.112 - Energy conservation policy.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 41 Public Contracts and Property Management 2 2013-07-01 2012-07-01 true Energy conservation...-General Policies § 101-25.112 Energy conservation policy. (a) Agency officials responsible for procurement..., which has been established pursuant to Public Law 94-163, Energy Policy and Conservation Act. (b)...

  11. 41 CFR 101-25.112 - Energy conservation policy.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 41 Public Contracts and Property Management 2 2012-07-01 2012-07-01 false Energy conservation...-General Policies § 101-25.112 Energy conservation policy. (a) Agency officials responsible for procurement..., which has been established pursuant to Public Law 94-163, Energy Policy and Conservation Act. (b)...

  12. 41 CFR 101-25.112 - Energy conservation policy.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 41 Public Contracts and Property Management 2 2014-07-01 2012-07-01 true Energy conservation...-General Policies § 101-25.112 Energy conservation policy. (a) Agency officials responsible for procurement..., which has been established pursuant to Public Law 94-163, Energy Policy and Conservation Act. (b)...

  13. 41 CFR 101-25.112 - Energy conservation policy.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 41 Public Contracts and Property Management 2 2010-07-01 2010-07-01 true Energy conservation...-General Policies § 101-25.112 Energy conservation policy. (a) Agency officials responsible for procurement..., which has been established pursuant to Public Law 94-163, Energy Policy and Conservation Act. (b)...

  14. Proceedings of the 1985 Mississippi industrial energy conference

    SciTech Connect

    Not Available

    1985-01-01

    The following presentations are included: (1) Electric Load Management; (2) Heat Recovery; (3) Motor and Drive Systems; (4) How to Conduct an Energy Audit (outline only); (5) Energy-Efficient Lighting; (6) Industrial Chillers (outline only); (7) Plant Maintenance - Does it Pay; (8) Energy Accounting; (9) Air Compressors (outline only); (10) Thermal Storage (outline only); (11) HVAC Air Side; (12) Life-Cycle Cost; (13) Process Heating; (14) Industrial Ventilation (outline only); (15) Financing Energy-Conservation Projects; and (16) Solar Heating. The following titles are listed, but no material is included: (a) Rooftop HVAC, by Normal Asbjornson and Robert Hall, Mammoth, Minneapolis, MN; (b) Computer Energy Management, by Bob Batterman, Johnson Controls, Jackson, MS; and (c) Industrial Heat Pumps, by Bob Batterman, Johnson Controls, Jackson, MS.

  15. Energy efficiency opportunities in China. Industrial equipment and small cogeneration

    SciTech Connect

    1995-02-01

    A quick glance at comparative statistics on energy consumption per unit of industrial output reveals that China is one of the least energy efficient countries in the world. Energy waste not only impedes economic growth, but also creates pollution that threatens human health, regional ecosystems, and the global climate. China`s decision to pursue economic reform and encourage technology transfer from developed countries has created a window of opportunity for significant advances in energy efficiency. Policy changes, technical training, public education, and financing can help China realize its energy conservation potential.

  16. 77 FR 54839 - Energy Efficiency and Conservation Loan Program

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-09-06

    ... Energy Efficiency and Conservation Loan Program AGENCY: Rural Utilities Service, USDA. ACTION: Notice of... assistance in support of energy efficiency programs (EE Programs) sponsored and implemented by...

  17. Electrorheology for energy production and conservation

    NASA Astrophysics Data System (ADS)

    Huang, Ke

    Recently, based on the physics of viscosity, we developed a new technology, which utilizes electric or magnetic fields to change the rheology of complex fluids to reduce the viscosity, while keeping the temperature unchanged. The method is universal and applicable to all complex fluids with suspended particles of nano-meter, submicrometer, or micrometer size. Completely different from the traditional viscosity reduction method, raising the temperature, this technology is energy-efficient, as it only requires small amount of energy to aggregate the suspended particles. In this thesis, we will first discuss this new technology in detail, both in theory and practice. Then, we will report applications of our technology to energy science research. Presently, 80% of all energy sources are liquid fuels. The viscosity of liquid fuels plays an important role in energy production and energy conservation. With an electric field, we can reduce the viscosity of asphalt-based crude oil. This is important and useful for heavy crude oil and off-shore crude oil production and transportation. Especially, since there is no practical way to raise the temperature of crude oil inside the deepwater pipelines, our technology may play a key role in future off-shore crude oil production. Electrorehology can also be used to reduce the viscosity of refinery fuels, such as diesel fuel and gasoline. When we apply this technology to fuel injection, the fuel droplets in the fuel atomization become smaller, leading to faster combustion in the engine chambers. As the fuel efficiency of internal combustion engines depends on the combustion speed and timing, the fast combustion produces much higher fuel efficiency. Therefore, adding our technology on existing engines improves the engine efficiency significantly. A theoretical model for the engine combustion, which explains how fast combustion improves the engine efficiency, is also presented in the thesis. As energy is the key to our national

  18. 75 FR 17078 - Agency Information Collection: Energy Conservation Program: Compliance and Certification...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-04-05

    ... Information Collection for Electric Motors AGENCY: Office of Energy Efficiency and Renewable Energy... horsepower electric motors covered under the Energy Policy and Conservation Act (EPCA), as amended, Public... industrial equipment, including electric motors, 42 U.S.C. 6291 et seq., and states in relevant part...

  19. Role of conservation in planning for an energy emergency: home and work-place energy use

    SciTech Connect

    Carlsmith, R S

    1980-06-01

    Prospects for making substantial reductions in energy consumption in the residential, commercial, and industrial sectors are discussed. Steps to deal with an emergency and with preparations that can be started now to reduce our vulnerability are described. A large amount of energy conservation has occurred since 1973. As a result, 1980 consumption will be about 83 EJ instead of 104 EJ. Much of this energy conservation has come about from increased efficiency, as indicated by the fact that the energy/GNP ratio has dropped from 64 MJ/1972 dollar in 1973 to 58 MJ/1972 dollar in 1979. Higher energy prices have been and will continue to be the principal driving force for conservation. However, there are a number of serious barriers. Because of these barriers Congress has promulgated a program of encouraging conservation through regulations, financial measures, and information programs. Some of the most important are energy performance standards for new buildings, assistance in retrofitting residential buildings, and grants for institutional buildings. The planning for emergency situations remains incomplete. Proposed emergency measures (with the exception of gasoline rationing) focus largely on reduction of nonessential uses of energy. The potential reductions achievable by such measures would fall far short of the requirements in a serious emergency such as a cutoff of all imports from the mid-east. There remains an urgent need for detailed planning of allocation, distribution, pricing, and enforcement procedures for a major emergency.

  20. Design for energy efficiency: Energy efficient industrialized housing research program. Progress report

    SciTech Connect

    Kellett, R.; Berg, R.; Paz, A.; Brown, G.Z.

    1991-03-01

    Since 1989, the U.S. Department of Energy has sponsored the Energy Efficient Industrialized Housing research program (EEIH) to improve the energy efficiency of industrialized housing. Two research centers share responsibility for this program: The Center for Housing Innovation at the University of Oregon and the Florida Solar Energy Center, a research institute of the University of Central Florida. Additional funding is provided through the participation of private industry, state governments and utilities. The program is guided by a steering committee comprised of industry and government representatives. This report summarizes Fiscal Year (FY) 1990 activities and progress, and proposed activities for FY 1991 in Task 2.1 Design for Energy Efficiency. This task establishes a vision of energy conservation opportunities in critical regions, market segments, climate zones and manufacturing strategies significant to industrialized housing in the 21st Century. In early FY 1990, four problem statements were developed to define future housing demand scenarios inclusive of issues of energy efficiency, housing design and manufacturing. Literature surveys were completed to assess seven areas of influence for industrialized housing and energy conservation in the future. Fifty-five future trends were identified in computing and design process; manufacturing process; construction materials, components and systems; energy and environment; demographic context; economic context; and planning policy and regulatory context.