Thyroid Disease and Complementary and Alternative Medicine (CAM)

MedlinePlus

... spirit; this combines standard medicine with CAM practices. TYPES OF COMPLEMENTARY AND ALTERNATIVE MEDICINE (CAM) The NIH ... on stories from a handful of people) or qualitative evidence (based on feelings about the treatment) is ...

Active pixel sensor array with multiresolution readout

NASA Technical Reports Server (NTRS)

Fossum, Eric R. (Inventor); Kemeny, Sabrina E. (Inventor); Pain, Bedabrata (Inventor)

1999-01-01

An imaging device formed as a monolithic complementary metal oxide semiconductor integrated circuit in an industry standard complementary metal oxide semiconductor process, the integrated circuit including a focal plane array of pixel cells, each one of the cells including a photogate overlying the substrate for accumulating photo-generated charge in an underlying portion of the substrate and a charge coupled device section formed on the substrate adjacent the photogate having a sensing node and at least one charge coupled device stage for transferring charge from the underlying portion of the substrate to the sensing node. There is also a readout circuit, part of which can be disposed at the bottom of each column of cells and be common to all the cells in the column. The imaging device can also include an electronic shutter formed on the substrate adjacent the photogate, and/or a storage section to allow for simultaneous integration. In addition, the imaging device can include a multiresolution imaging circuit to provide images of varying resolution. The multiresolution circuit could also be employed in an array where the photosensitive portion of each pixel cell is a photodiode. This latter embodiment could further be modified to facilitate low light imaging.

Using Industry Professionals in Undergraduate Teaching: Effects on Student Learning

ERIC Educational Resources Information Center

Gentelli, Liesel

2015-01-01

Tutorials are a common complementary method of achieving student engagement with material covered in lectures, as students achieve deeper understanding by being involved in small group discussions. However, in an attempt to provide students with a taste of everything the industry has to offer, the Centre for Forensic Science at the University of…

Articulation of Industrial R&D with Higher Education in the Telecommunications Sector in South Africa

ERIC Educational Resources Information Center

Paterson, Andrew

2005-01-01

This article shows how and why particular higher education?industry research and development networks articulate with the South African telecommunications sector. The range of competing and complementary data telecommunications technologies available in the South African market provide varying opportunities for enterprises to engage in R&D. Two…

Attitudes towards and personal use of complementary and alternative medicine amongst clinicians working in audiovestibular disciplines.

PubMed

Crundwell, G; Baguley, D M

2016-08-01

Literature indicates that complementary and alternative medicine is used by patients with auditory and vestibular symptoms. This study sought to determine the prevalence of complementary and alternative medicine uptake, and examine attitudes towards complementary and alternative medicine in clinicians working with audiovestibular disorder patients. The Holistic Complementary and Alternative Medicine Questionnaire and a devised questionnaire about recent and lifetime use of complementary and alternative medicine were used. Fifty-four individuals, including audiologists, ENT surgeons, nurses and rehabilitationists, completed the questionnaires (67 per cent response rate). Lifetime prevalence of complementary and alternative medicine uptake was 44 per cent, and 12-month prevalence was 22 per cent. Uptake was more common in females, but there was no significant difference in use when comparing age, seniority or profession. Attitudes towards complementary and alternative medicine were mildly adverse, but sizeable standard deviation indicates wide-ranging attitudes. Clinicians working with patients with audiovestibular disorders have a range of attitudes towards complementary and alternative medicine. Personal uptake of complementary and alternative medicine was lower than that of the general UK population, but remains sizeable.

Synthesizing Equivalence Indices for the Comparative Evaluation of Technoeconomic Efficiency of Industrial Processes at the Design/Re-engineering Level

NASA Astrophysics Data System (ADS)

Fotilas, P.; Batzias, A. F.

2007-12-01

The equivalence indices synthesized for the comparative evaluation of technoeconomic efficiency of industrial processes are of critical importance since they serve as both, (i) positive/analytic descriptors of the physicochemical nature of the process and (ii) measures of effectiveness, especially helpful for investigated competitiveness in the industrial/energy/environmental sector of the economy. In the present work, a new algorithmic procedure has been developed, which initially standardizes a real industrial process, then analyzes it as a compromise of two ideal processes, and finally synthesizes the index that can represent/reconstruct the real process as a result of the trade-off between the two ideal processes taking as parental prototypes. The same procedure makes fuzzy multicriteria ranking within a set of pre-selected industrial processes for two reasons: (a) to analyze the process most representative of the production/treatment under consideration, (b) to use the `second best' alternative as a dialectic pole in absence of the two ideal processes mentioned above. An implantation of this procedure is presented, concerning a facility of biological wastewater treatment with six alternatives: activated sludge through (i) continuous-flow incompletely-stirred tank reactors in series, (ii) a plug flow reactor with dispersion, (iii) an oxidation ditch, and biological processing through (iv) a trickling filter, (v) rotating contactors, (vi) shallow ponds. The criteria used for fuzzy (to count for uncertainty) ranking are capital cost, operating cost, environmental friendliness, reliability, flexibility, extendibility. Two complementary indices were synthesized for the (ii)-alternative ranked first and their quantitative expressions were derived, covering a variety of kinetic models as well as recycle/bypass conditions. Finally, analysis of estimating the optimal values of these indices at maximum technoeconomic efficiency is presented and the implications (expected to be) caused by exogenous and endogenous factors (e.g., environmental standards change and innovative energy savings/substitution, respectively) are discussed by means of marginal efficiency graphs.

When the Academic World and the Real World Meet

ERIC Educational Resources Information Center

Svetlik, David

2007-01-01

In this article, the author relates the need for a complimentary relationship between the academic and real outside world. This is not to compare a college degree with outside work experience--the two are complementary. It is the world of business and industry that often cause changes. Students and practitioners of industrial automation are an…

The initiation of complementary feeding among Qom indigenous people.

PubMed

Olmedo, Sofia Irene; Valeggia, Claudia

2014-06-01

As of six months of life, breastfeeding no longer covers an infant's energy or micronutrient needs, so appropriate complementary feeding should be provided. The objective of this study was to assess the time and adequacy for introducing complementary feeding in a Qom/Toba population and analyze the sociocultural concepts of families regarding complementary feeding. Quantitative and qualitative data were collected by participant observation and semistructured surveys administered to mothers of 0-2 year old infants. Qom breastfeed their infants long term and on demand. Most infants have an adequate nutritional status and start complementary feeding at around 6 months old as per the local health center and international standards. However, mostly due to socioeconomic factors, foods chosen to complement breastfeeding have a relatively scarce nutritional value.

Usefulness of real-time PCR as a complementary tool to the monitoring of Legionella spp. and Legionella pneumophila by culture in industrial cooling systems.

PubMed

Touron-Bodilis, A; Pougnard, C; Frenkiel-Lebossé, H; Hallier-Soulier, S

2011-08-01

This study was designed to evaluate the usefulness of quantification by real-time PCR as a management tool to monitor concentrations of Legionella spp. and Legionella pneumophila in industrial cooling systems and its ability to anticipate culture trends by the French standard method (AFNOR T90-431). Quantifications of Legionella bacteria were achieved by both methods on samples from nine cooling systems with different water qualities. Proportion of positive samples for L. pneumophila quantified by PCR was clearly lower in deionized or river waters submitted to a biocide treatment than in raw river waters, while positive samples for Legionella spp. were quantified for almost all the samples. For some samples containing PCR inhibitors, high quantification limits (up to 4·80 × 10(5) GU l(-1) ) did not allow us to quantify L. pneumophila, when they were quantified by culture. Finally, the monitoring of concentrations of L. pneumophila by both methods showed similar trends for 57-100% of the samples. These results suggest that, if some methodological steps designed to reduce inhibitory problems and thus decrease the quantification limits, could be developed to quantify Legionella in complex waters, the real-time PCR could be a valuable complementary tool to monitor the evolution of L. pneumophila concentrations. This study shows the possibility of using real-time PCR to monitor L. pneumophila proliferations in cooling systems and the importance to adapt nucleic acid extraction and purification protocols to raw waters. Journal of Applied Microbiology © 2011 The Society for Applied Microbiology. No claim to French Government works.

Effect of sequencing of complementary feeding in relation to breast-feeding on total intake in infants.

PubMed

Shah, Dheeraj; Singh, Meenakshi; Gupta, Piyush; Faridi, M M A

2014-03-01

The aim of the present study was to evaluate whether the order of complementary feeding in relation to breast-feeding affects breast milk, semisolid, or total energy intake in infants. The present study was designed as a randomized crossover trial. The study was conducted in a tertiary care hospital. The study participants were 25 healthy infants between the ages of 7 and 11 months who were exclusively breast-fed for at least 6 months and were now receiving complementary foods for at least 1 month in addition to breast-feeding. Infants were randomized to follow a sequence of either complementary feeding before breast-feeding (sequence A) or complementary feeding after breast-feeding (sequence B) for the first day (24 hours) of the study period using simple randomization. For the next day, the sequence was reversed for each child. All babies received 3 actively fed complementary food meals per day (morning, afternoon, and evening). A semisolid study diet was prepared in the hospital by cooking rice and pulse with oil using a standard method, ensuring the energy density of at least 0.6 kcal/g. The infants were allowed ad libitum breast-feeding during the observation period. Semisolid intake was directly measured and breast milk intake was quantified by test weighing method. Energy intake from complementary foods was calculated from the product of energy density of the diet served on that day and the total amount consumed. The total energy intake and energy intake from breast milk and complementary foods between the 2 sequences were compared. The mean (standard deviation) energy intake from breast milk during 12 hours of daytime by following sequence A (complementary feeding before breast-feeding) was 132.0 (67.4) kcal in comparison with 135.9 (56.2) kcal in sequence B, which was not statistically different (P = 0.83). The mean (standard deviation) energy consumed from semisolids in sequences A and B was also comparable (88.6 [75.5] kcal vs. 85.5 [89.7] kcal; P = 0.58). The total energy intake during daytime in sequence A was 220.6 (96.2) kcal in comparison with 221.5 (94.0) kcal in sequence B, which was also comparable (P = 0.97). The results related to energy intake through breast milk and total energy intake were not different when insensible losses during feeding were adjusted in both groups. Altering the sequence of complementary feeding in relation to breast-feeding does not affect total energy intake.

Challenging Ties between State and Tobacco Industry: Advocacy Lessons from India

PubMed Central

Bhojani, Upendra; Venkataraman, Vidya; Manganawar, Bheemaray

2013-01-01

Background: Globally, tobacco use is a major public health concern given its huge morbidity and mortality burden that is inequitably high in low- and middle-income countries. The World Health Organization has suggested banning the advertisement, promotion and sponsorship of tobacco. However, governments in some countries, including India, are either directly engaged in tobacco industry operations or have a mandate to promote tobacco industry development. This paper analyses a short-term advocacy campaign that challenged the state-tobacco industry ties to draw lessons for effective public health advocacy. Method: This paper uses a case study method to analyze advocacy efforts in India to thwart the state-tobacco industry partnership: the Indian government’s sponsorship and support to a global tobacco industry event. The paper explores multiple strategies employed in the five-month advocacy campaign (May to October 2010) to challenge this state-industry tie. In doing so, we describe the challenges faced and the lessons learnt for effective advocacy. Results: Government withdrew participation and financial sponsorship from the tobacco industry event. Use of multiple strategies including engaging all concerned government agencies from the beginning, strategic use of media, presence and mobilization of civil society, and use of legal tools to gain information and judicial action, were complementary in bringing desired outcomes. Conclusion: Use of multiple and complementary advocacy strategies could lead to positive outcomes in a short-time campaign. The Framework Convention on Tobacco Control could form an important advocacy tool, especially in countries that have ratified it, to advocate for improvements in national tobacco control regulations. PMID:24688958

The initiation of complementary feeding among Qom indigenous people

PubMed Central

Irene Olmedo, Sofía; Valeggia, Claudia

2015-01-01

As of six months of life, breastfeeding no longer covers an infant’s energy or micronutrient needs, so appropriate complementary feeding should be provided. The objective of this study was to assess the time and adequacy for introducing complementary feeding in a Qom/Toba population and analyze the sociocultural concepts of families regarding complementary feeding. Quantitative and qualitative data were collected by participant observation and semistructured surveys administered to mothers of 0–2 year old infants. Qom breastfeed their infants long term and on demand. Most infants have an adequate nutritional status and start complementary feeding at around 6 months old as per the local health center and international standards. However, mostly due to socioeconomic factors, foods chosen to complement breastfeeding have a relatively scarce nutritional value. PMID:24862808

Absolute determination of single-stranded and self-complementary adeno-associated viral vector genome titers by droplet digital PCR.

PubMed

Lock, Martin; Alvira, Mauricio R; Chen, Shu-Jen; Wilson, James M

2014-04-01

Accurate titration of adeno-associated viral (AAV) vector genome copies is critical for ensuring correct and reproducible dosing in both preclinical and clinical settings. Quantitative PCR (qPCR) is the current method of choice for titrating AAV genomes because of the simplicity, accuracy, and robustness of the assay. However, issues with qPCR-based determination of self-complementary AAV vector genome titers, due to primer-probe exclusion through genome self-annealing or through packaging of prematurely terminated defective interfering (DI) genomes, have been reported. Alternative qPCR, gel-based, or Southern blotting titering methods have been designed to overcome these issues but may represent a backward step from standard qPCR methods in terms of simplicity, robustness, and precision. Droplet digital PCR (ddPCR) is a new PCR technique that directly quantifies DNA copies with an unparalleled degree of precision and without the need for a standard curve or for a high degree of amplification efficiency; all properties that lend themselves to the accurate quantification of both single-stranded and self-complementary AAV genomes. Here we compare a ddPCR-based AAV genome titer assay with a standard and an optimized qPCR assay for the titration of both single-stranded and self-complementary AAV genomes. We demonstrate absolute quantification of single-stranded AAV vector genomes by ddPCR with up to 4-fold increases in titer over a standard qPCR titration but with equivalent readout to an optimized qPCR assay. In the case of self-complementary vectors, ddPCR titers were on average 5-, 1.9-, and 2.3-fold higher than those determined by standard qPCR, optimized qPCR, and agarose gel assays, respectively. Droplet digital PCR-based genome titering was superior to qPCR in terms of both intra- and interassay precision and is more resistant to PCR inhibitors, a desirable feature for in-process monitoring of early-stage vector production and for vector genome biodistribution analysis in inhibitory tissues.

Noninvasive Evaluation of Special Alloys for Prostheses Using Complementary Methods

NASA Astrophysics Data System (ADS)

Savin, A.; Vizureanu, P.; Prevorovsky, Z.; Chlada, M.; Krofta, J.; Baltatu, M. S.; Istrate, B.; Steigmann, R.

2018-06-01

Ti-Mo-Si alloys have gained the attention of biomedical industry due to specific strength and corrosion resistance and the best biocompatibility among metallic materials used in medical prostheses. In order to characterize the material, the experimental determination of elastic matrix, mechanical wear and the probability of appearance and propagation of thin cracks are imposed. Thus, resonant ultrasound spectroscopy and acoustic emission as non-invasive methods and complementary methods as SEM, EDX are involved, to choose the best concentration of elements with the aim of mechanical properties improvement.

Assessing local market and organizational readiness for the integration of complementary and alternative medicine into ambulatory care centers.

PubMed

Makowski, Suzana K E

2004-01-01

Complementary and alternative medicine (CAM) is one of the fastest growing segments of the health care industry today, with studies suggesting that between 30% and 50% of the adult population in the United States uses some form of CAM. Many ambulatory care centers are considering integrating CAM into their clinical services. This article will review some of the national trends and present a framework for assessing local market demand for CAM in order to help prioritize an organization's CAM integration strategy.

Green gold: The potential and pitfalls for North American medicinal plants in the US botanical supplements industry

Treesearch

Aswini Pai; Matthew Skeels

2010-01-01

Complementary and alternative medicine (CAM) has become an implicit part of a lifestyle industry in the United States. The World Health Organization (WHO) reports that at least 41% of the population in the US has used CAM at least once in their lives (WHO 2002). Globalization, an influx of various immigrant cultures, and growing wariness of western allopathic medicine...

Inland waterborne transportation : an industry under siege

DOT National Transportation Integrated Search

2000-11-01

The first section of this report contains a brief history of the development of and role played by the inland waterway transportation system. The role of this mode in international trade is examined, along with the competitive and complementary roles...

Hygienic Shortcomings of Frozen Dessert Freezing Equipment and Fate of Listeria monocytogenes on Ice Cream-Soiled Stainless Steel.

PubMed

Inuwa, A; Lunt, A; Czuprynski, C; Miller, G; Rankin, S A

2017-10-19

Although frozen dairy desserts have a strong record of safety, recent outbreaks of foodborne disease linked to ice creams have brought new attention to this industry. There is concern that small-scale frozen dessert equipment may not comply with or be reviewed against published comprehensive design and construction sanitation specifications (National Sanitation Foundation or 3-A sanitary standards). Equipment sanitary design issues may result in reduced efficacy of cleaning and sanitation, thus increasing the likelihood of postprocess contamination with pathogenic bacteria. In this context, and given that Listeria monocytogenes outbreaks are of great concern for the frozen dessert industry, a complementary study was conducted to evaluate the fate of L. monocytogenes in ice cream mix on a stainless steel surface. Our results showed that L. monocytogenes survived for up to 6 weeks at room temperature and 9 weeks at 4°C in contaminated ice cream on a stainless steel surface. Furthermore, chlorine- and acid-based surface sanitizers had no detrimental effect on the L. monocytogenes when used at a concentration and contact time (1 min) recommended by the manufacturer; significant reduction in CFU required 5 to 20 min of contact time.

A new era of semiconductor genetics using ion-sensitive field-effect transistors: the gene-sensitive integrated cell.

PubMed

Toumazou, Christofer; Thay, Tan Sri Lim Kok; Georgiou, Pantelis

2014-03-28

Semiconductor genetics is now disrupting the field of healthcare owing to the rapid parallelization and scaling of DNA sensing using ion-sensitive field-effect transistors (ISFETs) fabricated using commercial complementary metal -oxide semiconductor technology. The enabling concept of DNA reaction monitoring introduced by Toumazou has made this a reality and we are now seeing relentless scaling with Moore's law ultimately achieving the $100 genome. In this paper, we present the next evolution of this technology through the creation of the gene-sensitive integrated cell (GSIC) for label-free real-time analysis based on ISFETs. This device is derived from the traditional metal-oxide semiconductor field-effect transistor (MOSFET) and has electrical performance identical to that of a MOSFET in a standard semiconductor process, yet is capable of incorporating DNA reaction chemistries for applications in single nucleotide polymorphism microarrays and DNA sequencing. Just as application-specific integrated circuits, which are developed in much the same way, have shaped our consumer electronics industry and modern communications and memory technology, so, too, do GSICs based on a single underlying technology principle have the capacity to transform the life science and healthcare industries.

Chinese Cyber Espionage: A Complementary Method to Aid PLA Modernization

DTIC Science & Technology

2015-12-01

industrial base sectors…The information targeted could potentially be used to benefit China’s defense industry.”10 While there are likely classified analyses...on Global Conflict and Cooperation, January 2014), 2–3, http://escholarship.org/uc/item/7s48w1ck; Maggie Marcum, “Assessing High-Risk, High- Benefit ...government hacktivists conduct cyber espionage against domestic targets, foreign governments, military networks, and private businesses to benefit their

A CMOS silicon spin qubit

PubMed Central

Maurand, R.; Jehl, X.; Kotekar-Patil, D.; Corna, A.; Bohuslavskyi, H.; Laviéville, R.; Hutin, L.; Barraud, S.; Vinet, M.; Sanquer, M.; De Franceschi, S.

2016-01-01

Silicon, the main constituent of microprocessor chips, is emerging as a promising material for the realization of future quantum processors. Leveraging its well-established complementary metal–oxide–semiconductor (CMOS) technology would be a clear asset to the development of scalable quantum computing architectures and to their co-integration with classical control hardware. Here we report a silicon quantum bit (qubit) device made with an industry-standard fabrication process. The device consists of a two-gate, p-type transistor with an undoped channel. At low temperature, the first gate defines a quantum dot encoding a hole spin qubit, the second one a quantum dot used for the qubit read-out. All electrical, two-axis control of the spin qubit is achieved by applying a phase-tunable microwave modulation to the first gate. The demonstrated qubit functionality in a basic transistor-like device constitutes a promising step towards the elaboration of scalable spin qubit geometries in a readily exploitable CMOS platform. PMID:27882926

Thermal Performance Testing of Cryogenic Insulation Systems

NASA Technical Reports Server (NTRS)

Fesmire, James E.; Augustynowicz, Stan D.; Scholtens, Brekke E.

2007-01-01

Efficient methods for characterizing thermal performance of materials under cryogenic and vacuum conditions have been developed. These methods provide thermal conductivity data on materials under actual-use conditions and are complementary to established methods. The actual-use environment of full temperature difference in combination with vacuum-pressure is essential for understanding insulation system performance. Test articles include solids, foams, powders, layered blankets, composite panels, and other materials. Test methodology and apparatus design for several insulation test cryostats are discussed. The measurement principle is liquid nitrogen boil-off calorimetry. Heat flux capability ranges from approximately 0.5 to 500 watts per square meter; corresponding apparent thermal conductivity values range from below 0.01 up to about 60 mW/m- K. Example data for different insulation materials are also presented. Upon further standardization work, these patented insulation test cryostats can be available to industry for a wide range of practical applications.

A CMOS silicon spin qubit

NASA Astrophysics Data System (ADS)

Maurand, R.; Jehl, X.; Kotekar-Patil, D.; Corna, A.; Bohuslavskyi, H.; Laviéville, R.; Hutin, L.; Barraud, S.; Vinet, M.; Sanquer, M.; de Franceschi, S.

2016-11-01

Silicon, the main constituent of microprocessor chips, is emerging as a promising material for the realization of future quantum processors. Leveraging its well-established complementary metal-oxide-semiconductor (CMOS) technology would be a clear asset to the development of scalable quantum computing architectures and to their co-integration with classical control hardware. Here we report a silicon quantum bit (qubit) device made with an industry-standard fabrication process. The device consists of a two-gate, p-type transistor with an undoped channel. At low temperature, the first gate defines a quantum dot encoding a hole spin qubit, the second one a quantum dot used for the qubit read-out. All electrical, two-axis control of the spin qubit is achieved by applying a phase-tunable microwave modulation to the first gate. The demonstrated qubit functionality in a basic transistor-like device constitutes a promising step towards the elaboration of scalable spin qubit geometries in a readily exploitable CMOS platform.

A CMOS silicon spin qubit.

PubMed

Maurand, R; Jehl, X; Kotekar-Patil, D; Corna, A; Bohuslavskyi, H; Laviéville, R; Hutin, L; Barraud, S; Vinet, M; Sanquer, M; De Franceschi, S

2016-11-24

Silicon, the main constituent of microprocessor chips, is emerging as a promising material for the realization of future quantum processors. Leveraging its well-established complementary metal-oxide-semiconductor (CMOS) technology would be a clear asset to the development of scalable quantum computing architectures and to their co-integration with classical control hardware. Here we report a silicon quantum bit (qubit) device made with an industry-standard fabrication process. The device consists of a two-gate, p-type transistor with an undoped channel. At low temperature, the first gate defines a quantum dot encoding a hole spin qubit, the second one a quantum dot used for the qubit read-out. All electrical, two-axis control of the spin qubit is achieved by applying a phase-tunable microwave modulation to the first gate. The demonstrated qubit functionality in a basic transistor-like device constitutes a promising step towards the elaboration of scalable spin qubit geometries in a readily exploitable CMOS platform.

Can the Brain Be Trained? Comparing the Literature on the Use of EEG Biofeedback/Neurofeedback as an Alternative or Complementary Therapy for Attention Deficit Hyperactivity Disorder (ADHD)

ERIC Educational Resources Information Center

Stankus, Tony

2008-01-01

Psychologists, social workers, and school counselors are increasingly adding neurofeedback (NFT), a controversial alternative or complementary therapy to their treatment plans for patients with Attention Deficit Hyperactivity Disorder. NFT involves training the patient in self-regulation of brain wave patterns, employing a standard diagnostic…

The Complementary Therapies for Labour and Birth Study making sense of labour and birth - Experiences of women, partners and midwives of a complementary medicine antenatal education course.

PubMed

Levett, K M; Smith, C A; Bensoussan, A; Dahlen, H G

2016-09-01

to gain insight into the experiences of women, partners and midwives who participated in the Complementary Therapies for Labour and Birth Study, an evidence based complementary medicine (CM) antenatal education course. qualitative in-depth interviews and a focus group as part of the Complementary Therapies for Labour and Birth Study. thirteen low risk primiparous women and seven partners who had participated in the study group of a randomised controlled trial of the complementary therapies for labour and birth study, and 12 midwives caring for these women. The trial was conducted at two public hospitals, and through the Western Sydney University in Sydney, Australia. the Complementary Therapies for Labour and Birth (CTLB) protocol, based on the She Births® course and the Acupressure for labour and birth protocol, incorporated six evidence-based complementary medicine (CM) techniques; acupressure, relaxation, visualisation, breathing, massage, yoga techniques and incorporated facilitated partner support. Randomisation to the trial occurred at 24-36 weeks' gestation, and participants attended a two-day antenatal education programme, plus standard care, or standard care alone. the overarching theme identified in the qualitative data was making sense of labour and birth. Women used information about normal birth physiology from the course to make sense of labour, and to utilise the CM techniques to support normal birth and reduce interventions in labour. Women's, partners' and midwives' experience of the course and its use during birth gave rise to supporting themes such as: working for normal; having a toolkit; and finding what works. the Complementary Therapies for Labour and Birth Study provided women and their partners with knowledge to understand the physiology of normal labour and birth and enabled them to use evidence-based CM tools to support birth and reduce interventions. the Complementary Therapies for Labour and Birth Study introduces concepts of what constitutes normal birth and provides skills to support women, partners and midwives. It appears to be an effective form of antenatal education that supports normal birth, and maternity services need to consider how they can reform current antenatal education in line with this evidence. Crown Copyright © 2016. Published by Elsevier Ltd. All rights reserved.

The role of complementary and alternative therapies in pediatric diabetes.

PubMed

Shapiro, Sofia; Rapaport, Robert

2009-12-01

Complementary and alternative medicine (CAM), also referred to as holistic, or integrative, medicine, are terms that describe a heterogeneous collection of nontraditional therapies, from chemical substances, to biofeedback, to prayer. This review focuses on CAM in pediatric patients with type 1 and type 2 diabetes. CAM prevalence in this population and the specific modalities that have been studied in children are described. Randomized, placebo-controlled, prospective studies in young adults are evaluated for their applicability to pediatric patients. CAM's "complementary" role is emphasized, as there is evidence of significant morbidity when CAM replaces standard-of-care therapy.

Two Models for Evaluating Alignment of State Standards and Assessments: Competing or Complementary Perspectives?

ERIC Educational Resources Information Center

Newton, Jill A.; Kasten, Sarah E.

2013-01-01

The release of the Common Core State Standards for Mathematics and their adoption across the United States calls for careful attention to the alignment between mathematics standards and assessments. This study investigates 2 models that measure alignment between standards and assessments, the Surveys of Enacted Curriculum (SEC) and the Webb…

Competencies for public health and interprofessional education in accreditation standards of complementary and alternative medicine disciplines.

PubMed

Brett, Jennifer; Brimhall, Joseph; Healey, Dale; Pfeifer, Joseph; Prenguber, Marcia

2013-01-01

This review examines the educational accreditation standards of four licensed complementary and alternative medicine (CAM) disciplines (naturopathic medicine, chiropractic health care, acupuncture and oriental medicine, and massage therapy), and identifies public health and other competencies found in those standards that contribute to cooperation and collaboration among the health care professions. These competencies may form a foundation for interprofessional education. The agencies that accredit the educational programs for each of these disciplines are individually recognized by the United States Department (Secretary) of Education. Patients and the public are served when healthcare practitioners collaborate and cooperate. This is facilitated when those practitioners possess competencies that provide them the knowledge and skills to work with practitioners from other fields and disciplines. Educational accreditation standards provide a framework for the delivery of these competencies. Requiring these competencies through accreditation standards ensures that practitioners are trained to optimally function in integrative clinical care settings. © 2013 Elsevier Inc. All rights reserved.

15 CFR 784.3 - Scope and conduct of complementary access.

Code of Federal Regulations, 2011 CFR

2011-01-01

..., safety, and security regulations (e.g., regulations for protection of controlled environments within the... (Continued) BUREAU OF INDUSTRY AND SECURITY, DEPARTMENT OF COMMERCE ADDITIONAL PROTOCOL REGULATIONS... presence of a U.S. Government Host Team. No information of direct national security significance shall be...

Industrial Inspection with Open Eyes: Advance with Machine Vision Technology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liu, Zheng; Ukida, H.; Niel, Kurt

Machine vision systems have evolved significantly with the technology advances to tackle the challenges from modern manufacturing industry. A wide range of industrial inspection applications for quality control are benefiting from visual information captured by different types of cameras variously configured in a machine vision system. This chapter screens the state of the art in machine vision technologies in the light of hardware, software tools, and major algorithm advances for industrial inspection. The inspection beyond visual spectrum offers a significant complementary to the visual inspection. The combination with multiple technologies makes it possible for the inspection to achieve a bettermore » performance and efficiency in varied applications. The diversity of the applications demonstrates the great potential of machine vision systems for industry.« less

Ultrasonic characterization of granites obtained from industrial quarries of Extremadura (Spain).

PubMed

del Río, L M; López, F; Esteban, F J; Tejado, J J; Mota, M; González, I; San Emeterio, J L; Ramos, A

2006-12-22

The industry of ornamental rocks, such as granites, represents one of the most important industrial activities in the region of Extremadura, SW Spain. A detailed knowledge of the intrinsic properties of this natural stone and its environmental evolution is a required goal in order to fully characterize its quality. In this work, two independent NDT acoustic techniques have been used to measure the acoustic velocity of longitudinal waves in different prismatic granitic-samples of industrial quarries. A low-frequency transceiver set-up, based on a high-voltage BPV Steinkamp instrument and two 50 kHz probes, has been used to measure pulse travel times by ultrasonic through-transmission testing. In complementary fashion, an Erudite MK3 test equipment with an electromagnetic vibrator and two piezoelectric sensors has also been employed to measure ultrasonic velocity by means of a resonance-based method, using the same types of granite varieties. In addition, a comprehensive set of physical/mechanical properties have also been analyzed, according to Spanish regulations in force, by means of alternative methods including destructive techniques such as strength, porosity, absorption, etc. A large number of samples, representing the most important varieties of granites from quarries of Extremadura, have been analyzed using the above-mentioned procedures. Some results obtained by destructive techniques have been correlated with those found using ultrasonic techniques. Our experimental setting allowed a complementary characterization of granite samples and a thorough validation of the different techniques employed, thus providing the industry of ornamental rocks with a non-destructive tool that will facilitate a more detailed insight on the properties of the rocks under study.

The first initiative of DNA barcoding of ornamental plants from Egypt and potential applications in horticulture industry

PubMed Central

Ashfaq, Muhammad; Ali, Hayssam M.; Yessoufou, Kowiyou

2017-01-01

DNA barcoding relies on short and standardized gene regions to identify species. The agricultural and horticultural applications of barcoding such as for marketplace regulation and copyright protection remain poorly explored. This study examines the effectiveness of the standard plant barcode markers (matK and rbcL) for the identification of plant species in private and public nurseries in northern Egypt. These two markers were sequenced from 225 specimens of 161 species and 62 plant families of horticultural importance. The sequence recovery was similar for rbcL (96.4%) and matK (84%), but the number of specimens assigned correctly to the respective genera and species was lower for rbcL (75% and 29%) than matK (85% and 40%). The combination of rbcL and matK brought the number of correct generic and species assignments to 83.4% and 40%, respectively. Individually, the efficiency of both markers varied among different plant families; for example, all palm specimens (Arecaceae) were correctly assigned to species while only one individual of Asteraceae was correctly assigned to species. Further, barcodes reliably assigned ornamental horticultural and medicinal plants correctly to genus while they showed a lower or no success in assigning these plants to species and cultivars. For future, we recommend the combination of a complementary barcode (e.g. ITS or trnH-psbA) with rbcL + matK to increase the performance of taxa identification. By aiding species identification of horticultural crops and ornamental palms, the analysis of the barcode regions will have large impact on horticultural industry. PMID:28199378

The first initiative of DNA barcoding of ornamental plants from Egypt and potential applications in horticulture industry.

PubMed

O Elansary, Hosam; Ashfaq, Muhammad; Ali, Hayssam M; Yessoufou, Kowiyou

2017-01-01

DNA barcoding relies on short and standardized gene regions to identify species. The agricultural and horticultural applications of barcoding such as for marketplace regulation and copyright protection remain poorly explored. This study examines the effectiveness of the standard plant barcode markers (matK and rbcL) for the identification of plant species in private and public nurseries in northern Egypt. These two markers were sequenced from 225 specimens of 161 species and 62 plant families of horticultural importance. The sequence recovery was similar for rbcL (96.4%) and matK (84%), but the number of specimens assigned correctly to the respective genera and species was lower for rbcL (75% and 29%) than matK (85% and 40%). The combination of rbcL and matK brought the number of correct generic and species assignments to 83.4% and 40%, respectively. Individually, the efficiency of both markers varied among different plant families; for example, all palm specimens (Arecaceae) were correctly assigned to species while only one individual of Asteraceae was correctly assigned to species. Further, barcodes reliably assigned ornamental horticultural and medicinal plants correctly to genus while they showed a lower or no success in assigning these plants to species and cultivars. For future, we recommend the combination of a complementary barcode (e.g. ITS or trnH-psbA) with rbcL + matK to increase the performance of taxa identification. By aiding species identification of horticultural crops and ornamental palms, the analysis of the barcode regions will have large impact on horticultural industry.

Effects-Directed Analysis (EDA) and Toxicity Identification Evaluation (TIE): Complementary but Different Approaches for Diagnosing Causes of Environmental Toxicity

EPA Science Inventory

Currently, two approaches are available for performing environmental diagnostics on samples like municipal and industrial effluents, interstitial waters and whole sediments in order to identify anthropogenic contaminants causing toxicological effects. One approach is Toxicity Id...

Evaluating a multi-criteria model for hazard assessment in urban design. The Porto Marghera case study

DOE Office of Scientific and Technical Information (OSTI.GOV)

Luria, Paolo; Aspinall, Peter A

2003-08-01

The aim of this paper is to describe a new approach to major industrial hazard assessment, which has been recently studied by the authors in conjunction with the Italian Environmental Protection Agency ('ARPAV'). The real opportunity for developing a different approach arose from the need of the Italian EPA to provide the Venice Port Authority with an appropriate estimation of major industrial hazards in Porto Marghera, an industrial estate near Venice (Italy). However, the standard model, the quantitative risk analysis (QRA), only provided a list of individual quantitative risk values, related to single locations. The experimental model is based onmore » a multi-criteria approach--the Analytic Hierarchy Process--which introduces the use of expert opinions, complementary skills and expertise from different disciplines in conjunction with quantitative traditional analysis. This permitted the generation of quantitative data on risk assessment from a series of qualitative assessments, on the present situation and on three other future scenarios, and use of this information as indirect quantitative measures, which could be aggregated for obtaining the global risk rate. This approach is in line with the main concepts proposed by the last European directive on Major Hazard Accidents, which recommends increasing the participation of operators, taking the other players into account and, moreover, paying more attention to the concepts of 'urban control', 'subjective risk' (risk perception) and intangible factors (factors not directly quantifiable)« less

Broken trusts: The Texas Attorney General versus the oil industry, 1889-1909

NASA Astrophysics Data System (ADS)

Singer, Jonathan Whitney

The legal history of state antitrust enforcement and the oil industry in Texas illustrates how and why antitrust law contemplated complementary enforcement at the state and federal government level. Historians, economists, and lawyers have concentrated on federal antitrust law and enforcement, ignoring state efforts. Yet for most of the first twenty-five years following the enactment of the Sherman Antitrust Act, federal enforcement efforts were extremely limited, leaving the field to the states. Texas was one of several states that had strong antitrust laws, and whose attorneys general prosecuted antitrust violations with vigor. Political ambition was a factor in the decisions to investigate and prosecute cases against a highly visible target, the petroleum industry, but there was also a genuine belief in the goals of antitrust policy, and in the efficacy of enforcement of the laws. Enforcement efforts were also complicated by the fact that large oil companies provided vital commodities, articles of "prime necessity," to the citizens of Texas and following the discovery of large oil fields, played an increasingly important role in the economies of many Texas communities. The Texas Attorney General's antitrust enforcement efforts against the oil industry in this time of transition from an agricultural society to an industrial society provide insights into the litigation process, and reveal how well the rhetoric of trust-busting fit with the reality of antitrust enforcement. The antitrust crusade against the petroleum industry also highlights the changing roles of state government in the late nineteenth and early twentieth centuries, particularly the Attorney General's Department. The experience of Texas undermines the view that federal action has always dominated antitrust enforcement efforts and that antitrust litigation against Standard Oil was ineffective and ineffectual. Rather, the Texas Attorney General's litigations and their results suggest that some states took their role in the dual enforcement scheme seriously and that the measure of success of antitrust enforcement goes beyond the amount of monetary penalties collected, and companies permanently ousted from a state.

Evaluation of a complementary cyber education program for a pathophysiology class.

PubMed

Yoo, Ji-Soo; Ryue, Sook-Hee; Lee, Jung Eun; Ahn, Jeong-Ah

2009-12-01

The goal of this study was to develop and evaluate a complementary cyber education program for a required pathophysiology class for nursing students. The cyber education program comprised electronic bulletin boards, correspondence material storage, an announcement section, a report submission section, reference sites, and statistics on learning rates. Twelve online lectures complemented five lectures in the classroom. To evaluate the course's educational effectiveness, we performed an online objective questionnaire and an open questionnaire survey anonymously, and compared the complementary cyber education program with traditional classroom education. The complementary cyber education program effected significant improvements in scores for importance with regard to major, clarity of goals and education plans for courses, professor readiness, preciseness and description of lectures, amount and efficiency of assignments, and fairness in appraisal standards compared with the traditional classroom education group. This study indicates that a complementary cyber education program provides nursing students with the flexibility of time and space, the newest information through updated lectures, efficient motivational aids through intimacy between the lecturer and students, and concrete and meaningful tasks. The complementary cyber education course also increased student effort toward studying and student satisfaction with the class.

Comparison of multiple gene assembly methods for metabolic engineering

Treesearch

Chenfeng Lu; Karen Mansoorabadi; Thomas Jeffries

2007-01-01

A universal, rapid DNA assembly method for efficient multigene plasmid construction is important for biological research and for optimizing gene expression in industrial microbes. Three different approaches to achieve this goal were evaluated. These included creating long complementary extensions using a uracil-DNA glycosylase technique, overlap extension polymerase...

14 CFR 399.31 - Standard industry fare level.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Standard industry fare level. 399.31... Standard industry fare level. (a) Generally. Except as set forth in paragraph (d) of this section, the standard industry fare level (“SIFL”) for coach/standard service in a market is equal to the predominant...

14 CFR 399.31 - Standard industry fare level.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 14 Aeronautics and Space 4 2013-01-01 2013-01-01 false Standard industry fare level. 399.31... Standard industry fare level. (a) Generally. Except as set forth in paragraph (d) of this section, the standard industry fare level (“SIFL”) for coach/standard service in a market is equal to the predominant...

14 CFR 399.31 - Standard industry fare level.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 4 2011-01-01 2011-01-01 false Standard industry fare level. 399.31... Standard industry fare level. (a) Generally. Except as set forth in paragraph (d) of this section, the standard industry fare level (“SIFL”) for coach/standard service in a market is equal to the predominant...

14 CFR 399.31 - Standard industry fare level.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 14 Aeronautics and Space 4 2014-01-01 2014-01-01 false Standard industry fare level. 399.31... Standard industry fare level. (a) Generally. Except as set forth in paragraph (d) of this section, the standard industry fare level (“SIFL”) for coach/standard service in a market is equal to the predominant...

14 CFR 399.31 - Standard industry fare level.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 14 Aeronautics and Space 4 2012-01-01 2012-01-01 false Standard industry fare level. 399.31... Standard industry fare level. (a) Generally. Except as set forth in paragraph (d) of this section, the standard industry fare level (“SIFL”) for coach/standard service in a market is equal to the predominant...

75 FR 15440 - Guidance for Industry on Standards for Securing the Drug Supply Chain-Standardized Numerical...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-29

...] Guidance for Industry on Standards for Securing the Drug Supply Chain--Standardized Numerical... industry entitled ``Standards for Securing the Drug Supply Chain-Standardized Numerical Identification for... the Drug Supply Chain-Standardized Numerical Identification for Prescription Drug Packages.'' In the...

77 FR 8020 - Semiannual Regulatory Agenda

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-13

... Size 3245-AG25 Standards for Utilities Industries. 463 Small Business Size 3245-AG26 Standards... Remediation Services Industries. 465 Small Business Size 3245-AG28 Standards: Real Estate, Rental and Leasing Industries. 466 Small Business Size 3245-AG29 Standards: Educational Services Industries. 467 Small Business...

75 FR 13209 - Proposed Information Collection (Technical Industry Standards) Activity: Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-18

... (Technical Industry Standards) Activity: Comment Request AGENCY: Office of Acquisition and Logistics... Industry Standards. OMB Control Number: 2900-0586. Type of Review: Extension of a currently approved collection. Abstract: VAAR provision 852.211-75, Technical Industry Standards, requires items offered for...

75 FR 28857 - Agency Information Collection (Technical Industry Standards) Activities Under OMB Review

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-24

... (Technical Industry Standards) Activities Under OMB Review AGENCY: Office of Acquisition and Logistics... Industry Standards. OMB Control Number: 2900-0586. Type of Review: Extension of a currently approved collection. Abstract: VAAR provision 852.211-75, Technical Industry Standards, requires that items offered...

48 CFR 811.103-70 - Technical industry standards.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 5 2013-10-01 2013-10-01 false Technical industry... Documents 811.103-70 Technical industry standards. Where items are required to conform to technical industry... organizations, where such standards are generally recognized and accepted in the industry involved, the...

48 CFR 811.103-70 - Technical industry standards.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 5 2014-10-01 2014-10-01 false Technical industry... Documents 811.103-70 Technical industry standards. Where items are required to conform to technical industry... organizations, where such standards are generally recognized and accepted in the industry involved, the...

48 CFR 811.103-70 - Technical industry standards.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 5 2011-10-01 2011-10-01 false Technical industry... Documents 811.103-70 Technical industry standards. Where items are required to conform to technical industry... organizations, where such standards are generally recognized and accepted in the industry involved, the...

48 CFR 811.103-70 - Technical industry standards.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 48 Federal Acquisition Regulations System 5 2012-10-01 2012-10-01 false Technical industry... Documents 811.103-70 Technical industry standards. Where items are required to conform to technical industry... organizations, where such standards are generally recognized and accepted in the industry involved, the...

Solvent recovery opportunities in the pharmaceutical industry.

PubMed

Barton, P I

2000-11-01

Opportunities for recovering and recycling waste solvent streams in the pharmaceutical industry are reviewed. A major obstacle to solvent recovery and recycling is the existence of azeotropic compositions, and thus separation barriers, in the mixtures in question. Advances in the understanding of these complex separation problems are discussed. Recent progress on novel designs for small-scale, flexible azeotropic separation processes is reviewed. Also considered is the alternative and complementary approach of integrating solvent use within a batch process so that the formation of hard-to-separate azeotropic compositions is prevented.

High-Performance WSe2 Complementary Metal Oxide Semiconductor Technology and Integrated Circuits.

PubMed

Yu, Lili; Zubair, Ahmad; Santos, Elton J G; Zhang, Xu; Lin, Yuxuan; Zhang, Yuhao; Palacios, Tomás

2015-08-12

Because of their extraordinary structural and electrical properties, two-dimensional materials are currently being pursued for applications such as thin-film transistors and integrated circuit. One of the main challenges that still needs to be overcome for these applications is the fabrication of air-stable transistors with industry-compatible complementary metal oxide semiconductor (CMOS) technology. In this work, we experimentally demonstrate a novel high performance air-stable WSe2 CMOS technology with almost ideal voltage transfer characteristic, full logic swing and high noise margin with different supply voltages. More importantly, the inverter shows large voltage gain (∼38) and small static power (picowatts), paving the way for low power electronic system in 2D materials.

A photonic circuit for complementary frequency shifting, in-phase quadrature/single sideband modulation and frequency multiplication: analysis and integration feasibility

NASA Astrophysics Data System (ADS)

Hasan, Mehedi; Hu, Jianqi; Nikkhah, Hamdam; Hall, Trevor

2017-08-01

A novel photonic integrated circuit architecture for implementing orthogonal frequency division multiplexing by means of photonic generation of phase-correlated sub-carriers is proposed. The circuit can also be used for implementing complex modulation, frequency up-conversion of the electrical signal to the optical domain and frequency multiplication. The principles of operation of the circuit are expounded using transmission matrices and the predictions of the analysis are verified by computer simulation using an industry-standard software tool. Non-ideal scenarios that may affect the correct function of the circuit are taken into consideration and quantified. The discussion of integration feasibility is illustrated by a photonic integrated circuit that has been fabricated using 'library' components and which features most of the elements of the proposed circuit architecture. The circuit is found to be practical and may be fabricated in any material platform that offers a linear electro-optic modulator such as organic or ferroelectric thin films hybridized with silicon photonics.

Metal-ferroelectric-metal capacitor based persistent memory for electronic product code class-1 generation-2 uhf passive radio-frequency identification tag

NASA Astrophysics Data System (ADS)

Yoon, Bongno; Sung, Man Young; Yeon, Sujin; Oh, Hyun S.; Kwon, Yoonjoo; Kim, Chuljin; Kim, Kyung-Ho

2009-03-01

With the circuits using metal-ferroelectric-metal (MFM) capacitor, rf operational signal properties are almost the same or superior to those of polysilicon-insulator-polysilicon, metal-insulator-metal, and metal-oxide-semiconductor (MOS) capacitors. In electronic product code global class-1 generation-2 uhf radio-frequency identification (RFID) protocols, the MFM can play a crucial role in satisfying the specifications of the inventoried flag's persistence times (Tpt) for each session (S0-S3, SL). In this paper, we propose and design a new MFM capacitor based memory scheme of which persistence time for S1 flag is measured at 2.2 s as well as indefinite for S2, S3, and SL flags during the period of power-on. A ferroelectric random access memory embedded RFID tag chip is fabricated with an industry-standard complementary MOS process. The chip size is around 500×500 μm2 and the measured power consumption is about 10 μW.

Essays on Innovation Ecosystems in the Enterprise Software Industry

ERIC Educational Resources Information Center

Huang, Peng

2010-01-01

Innovation ecosystem strategy is often adopted by platform technology owners to seek complementary innovation from resources located outside the firm to exploit indirect network effect. In this dissertation I aim to address the issues that are related to the formation and business value of platform innovation ecosystems in the enterprise software…

Complementary Electromagnetic Non-Destructive Evaluation

NASA Astrophysics Data System (ADS)

Tian, Gui Yun; Wilson, John; Morozov, Maxim

2011-06-01

The use of non-destructive evaluation (NDE) for defect detection and failure prediction in structures and specimens is widespread in energy industries, aimed at ageing power plants and pipelines, material degradation, fatigue and radiation damage, etc. At present there are no suitable electromagnetic NDE methods for the measurement and characterization of material degradation, in irradiated samples in particular, which is very important and timely for the nuclear power industry in the UK. This paper reports recent developments in the field of electromagnetic (EM) NDE at Newcastle University, including pulsed eddy current (PEC), pulsed magnetic flux leakage (PMFL), magnetic Barkhausen emission (MBE) and magneto-acoustic emission (MAE). As different EM methods have different strengths, an integrative EM framework is introduced. Case studies through the second round robin tests organized by the Universal Network for Magnetic Non-Destructive Evaluation (UNMNDE), representing eighteen leading research groups worldwide in the area of electromagnetic NDE, are reported. Twelve samples with different ageing times and rolling reduction ratios were tested using different magnetic methods among the UNMNDE members. Based on the studies, the complementary characteristics of electromagnetic techniques for NDE are discussed.

New Norwegian HSE standard for the offshore industry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Huse, J.R.

1996-12-31

NORSOK (The competitive standing of the Norwegian offshore sector) is the Norwegian industry initiative to add value, reduce cost and lead time and remove unnecessary activities in offshore field developments and operations. The NORSOK standards are developed by the Norwegian petroleum industry as a part of the NORSOK initiative and are jointly issued by the Norwegian Oil Industry Association and the Federation of Norwegian Engineering Industries. The purpose of the industry standard is to replace the individual oil company specifications for use in existing and future petroleum industry developments, subject to the individual company`s review and application. The NORSOK Health,more » Safety and Environment (HSE) standards covers: Technical Safety, Working Environment, Environmental Care, HSE during Construction. The standards are now being used in ongoing offshore development projects, and the experience with standards shows that the principle aim is being met. The development of standards continues, implementing experience gained.« less

Improving stressful working lives: complementary therapies, counselling and clinical supervision for staff.

PubMed

Mackereth, Peter A; White, Keven; Cawthorn, Anne; Lynch, Barbara

2005-06-01

The aim of this paper is to briefly examine the contemporary phenomenon of "burnout" within oncology and palliative care. In discussing the suitable interventions to manage stress and avoid burnout, reference will be made to counselling and clinical supervision, but more substantially the paper will report on an innovative subsidised complementary therapy service for staff. The Government's Improving Working Lives Standard will be referred as an initiative that supports the development of supportive services for NHS staff.

Fundamentals of financial statement analysis for academic physician managers.

PubMed

Danzi, J T; Boom, M L

1998-04-01

Academic medical centers (i.e., teaching hospitals) and academic medical practices are under pressure to control costs to compete with for-profit health care institutions. The authors explain how academic physician managers who want to control costs wisely must first understand the cost structure of the medical center or practice and compare that structure with those of for-profit institutions. Doing this requires a firm understanding of how to use a valuable tool, financial statement analysis, to assess an institution's health and performance. Such analysis consists of calculating a variety of financial ratios (e.g., operating income divided by revenues; net income divided by total assets) and then comparing them with the corresponding ratios that are considered industry norms. Three types of financial statements (defined in detail) lend themselves to this approach: the balance sheet, income statement, and statement of cash flows. The authors define standard financial ratios, point out their uses and limitations, and emphasize that a ratio's meaning derives from comparing it with the corresponding benchmark ratio in the industry as a whole. Ratios should be used not as the end point of assessing financial status, but as ways to identify possible problems that require further investigation. Analysis of trends of ratios over time within an institution is a complementary approach. The authors then discuss the use of ratios in three standard types of institutional evaluation: of performance, of liquidity and leverage, and of strategic planning. In addition, they present the financial statement of a fictitious academic medical center as an example of how to use ratios for financial statement analysis. The authors emphasize that the key to using the ratios they discuss and hundreds of others is first to decide what question needs answering and then to choose the relevant ratios to provide a basis for finding the answer.

75 FR 2823 - Incorporating Employee Compensation Criteria Into the Risk Assessment System

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-19

... management. This initiative is intended to be a complementary effort to the supervisory standards being... incentive to choose to exceed base supervisory standards. In the wake of the global financial crisis that... precipitated the crisis. A review of work by academics, consulting groups and others indicates a broad...

Facing the rain after the phase out: Performance evaluation of alternative fluorinated and non-fluorinated durable water repellents for outdoor fabrics.

PubMed

Schellenberger, S; Gillgard, P; Stare, A; Hanning, A; Levenstam, O; Roos, S; Cousins, I T

2018-02-01

Fluorinated durable water repellent (DWR) agents are used to obtain water and stain repellent textiles. Due to the on-going phase-out of DWRs based on side-chain fluorinated polymers (SFP) with "long" perfluoroalkyl chains, the textile industry lacks suitable alternatives with comparable material characteristics. The constant development and optimization of SFPs for textile applications initiated more than half a century ago has resulted in a robust and very efficient DWR-technology and textiles with exceptional hydro- and oleo-phobic properties. The industry is now in the predicament that the long-chain SFPs with the best technical performance have undesirable toxicological and environmental behaviour. This study provides a comprehensive overview of the technical performance of presently available fluorinated and non-fluorinated DWRs as part of a chemical alternatives assessment (CAA). The results are based on a study with synthetic outdoor fabrics treated with alternative DWRs and tested for repellency using industrial standard and complementary methods. Using this approach, the complex structure-property relationships of DWR-polymers could be explained on a molecular level. Both short-chain SFPs and non-fluorinated DWRs showed excellent water repellency and durability in some cases while short-chain SFPs were the more robust of the alternatives to long-chain SFPs. A strong decline in oil repellency and durability with perfluoroalkyl chain length was shown for SFP DWRs. Non-fluorinated alternatives were unable to repel oil, which might limit their potential for substitution in textile application that require repellency towards non-polar liquids. Copyright © 2017. Published by Elsevier Ltd.

Experimental Comparison Between Mahoney and Complementary Sensor Fusion Algorithm for Attitude Determination by Raw Sensor Data of Xsens Imu on Buoy

NASA Astrophysics Data System (ADS)

Jouybari, A.; Ardalan, A. A.; Rezvani, M.-H.

2017-09-01

The accurate measurement of platform orientation plays a critical role in a range of applications including marine, aerospace, robotics, navigation, human motion analysis, and machine interaction. We used Mahoney filter, Complementary filter and Xsens Kalman filter for achieving Euler angle of a dynamic platform by integration of gyroscope, accelerometer, and magnetometer measurements. The field test has been performed in Kish Island using an IMU sensor (Xsens MTi-G-700) that installed onboard a buoy so as to provide raw data of gyroscopes, accelerometers, magnetometer measurements about 25 minutes. These raw data were used to calculate the Euler angles by Mahoney filter and Complementary filter, while the Euler angles collected by XSense IMU sensor become the reference of the Euler angle estimations. We then compared Euler angles which calculated by Mahoney Filter and Complementary Filter with reference to the Euler angles recorded by the XSense IMU sensor. The standard deviations of the differences between the Mahoney Filter, Complementary Filter Euler angles and XSense IMU sensor Euler angles were about 0.5644, 0.3872, 0.4990 degrees and 0.6349, 0.2621, 2.3778 degrees for roll, pitch, and heading, respectively, so the numerical result assert that Mahoney filter is precise for roll and heading angles determination and Complementary filter is precise only for pitch determination, it should be noted that heading angle determination by Complementary filter has more error than Mahoney filter.

Welds in thermoplastic composite materials

NASA Astrophysics Data System (ADS)

Taylor, N. S.

Welding methods are reviewed that can be effectively used for joining of thermoplastic composites and continuous-fiber thermoplastics. Attention is given to the use of ultrasonic, vibration, hot-plate, resistance, and induction welding techniques. The welding techniques are shown to provide complementary weld qualities for the range of thermoplastic materials that are of interest to industrial and technological applications.

Database Overlap vs. Complementary Coverage in Forestry and Forest Products: Factors in Database Acquisition.

ERIC Educational Resources Information Center

Hoover, Ryan E.

This study examines (1) subject content, (2) file size, (3) types of documents indexed, (4) range of years spanned, and (5) level of indexing and abstracting in five databases which collectively provide extensive coverage of the forestry and forest products industries: AGRICOLA, CAB ABSTRACTS, FOREST PRODUCTS (AIDS), PAPERCHEM, and PIRA. The…

48 CFR 852.211-72 - Technical industry standards.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 5 2013-10-01 2013-10-01 false Technical industry....211-72 Technical industry standards. As prescribed in 811.103-70, insert the following provision: Technical Industry Standards (JAN 2008) The supplies or equipment required by this invitation for bid or...

48 CFR 852.211-72 - Technical industry standards.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 48 Federal Acquisition Regulations System 5 2012-10-01 2012-10-01 false Technical industry....211-72 Technical industry standards. As prescribed in 811.103-70, insert the following provision: Technical Industry Standards (JAN 2008) The supplies or equipment required by this invitation for bid or...

48 CFR 852.211-72 - Technical industry standards.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 5 2011-10-01 2011-10-01 false Technical industry....211-72 Technical industry standards. As prescribed in 811.103-70, insert the following provision: Technical Industry Standards (JAN 2008) The supplies or equipment required by this invitation for bid or...

48 CFR 852.211-72 - Technical industry standards.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Technical industry....211-72 Technical industry standards. As prescribed in 811.103-70, insert the following provision: Technical Industry Standards (JAN 2008) The supplies or equipment required by this invitation for bid or...

48 CFR 852.211-72 - Technical industry standards.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 5 2014-10-01 2014-10-01 false Technical industry....211-72 Technical industry standards. As prescribed in 811.103-70, insert the following provision: Technical Industry Standards (JAN 2008) The supplies or equipment required by this invitation for bid or...

ASTM and ASME-BPE Standards--Complying with the Needs of the Pharmaceutical Industry.

PubMed

Huitt, William M

2011-01-01

Designing and building a pharmaceutical facility requires the owner, engineer of record, and constructor to be knowledgeable with regard to the industry codes and standards that apply to this effort. Up until 1997 there were no industry standards directed at the needs and requirements of the pharmaceutical industry. Prior to that time it was a patchwork effort at resourcing and adopting nonpharmaceutical-related codes and standards and then modifying them in order to meet the more stringent requirements of the Food and Drug Administration (FDA). In 1997 the American Society of Mechanical Engineers (ASME) published the first Bioprocessing Equipment (BPE) Standard. Through harmonization efforts this relatively new standard has brought together, scrutinized, and refined industry accepted methodologies together with FDA compliance requirements, and has established an American National Standard that provides a comprehensive set of standards that are integral to the pharmaceutical industry. This article describes various American National Standards, including those developed and published by the American Society for Testing and Materials (ASTM), and how they apply to the pharmaceutical industry. It goes on to discuss the harmonization effort that takes place between the various standards developers in an attempt to prevent conflicts and omissions between the many standards. Also included are examples of tables and figures taken from the ASME-BPE Standard. These examples provide the reader with insight to the relevant content of the ASME-BPE Standard. Designing and building a pharmaceutical facility requires the owner, engineer of record, and constructor to be knowledgeable with regard to the industry codes and standards that apply to this effort. Up until 1997 there were no industry standards directed at the needs and requirements of the pharmaceutical industry. Prior to that time it was a patchwork effort at resourcing and adopting nonpharmaceutical-related codes and standards and then modifying them in order to meet the more stringent requirements of the Food and Drug Administration (FDA). In 1997 the American Society of Mechanical Engineers (ASME) published the first Bioprocessing Equipment (BPE) Standard. In its initial development and ongoing maintenance it works with other American National Standards developers to harmonize the many standards associated with the design, engineering, and construction of bioprocessing facilities. This harmonization effort has established a comprehensive set of standards for the betterment of the pharmaceutical industry at large. This effort is, and will remain, very important as technology, along with new and improved product and processes, evolve into the future.

A Public Health Agenda for Traditional, Complementary, and Alternative Medicine

PubMed Central

Bodeker, Gerard; Kronenberg, Fredi

2002-01-01

Traditional medicine (a term used here to denote the indigenous health traditions of the world) and complementary and alternative medicine (T/CAM) have, in the past 10 years, claimed an increasing share of the public’s awareness and the agenda of medical researchers. Studies have documented that about half the population of many industrialized countries now use T/CAM, and the proportion is as high as 80% in many developing countries. Most research has focused on clinical and experimental medicine (safety, efficacy, and mechanism of action) and regulatory issues, to the general neglect of public health dimensions. Public health research must consider social, cultural, political, and economic contexts to maximize the contribution of T/CAM to health care systems globally. PMID:12356597

[Comparative analysis on industrial standardization degree of Chinese and Korean ginseng].

PubMed

Chu, Qiao; Xi, Xing-Jun; Wang, He-Yan; Si, Ding-Hua; Tang, Fei; Lan, Tao

2017-05-01

Panax ginseng is a well-known medicinal plant all over the world. It has high nutritional value and medicinal value. China and South Korea are the major countries in the world for ginseng cultivation, production and exportation. China's ginseng production accounts for more than half of the world, but the output value is less than that of Korea. The standardization process of ginseng industry plays an important role. This paper makes a detailed analysis of the Chinese and Korean ginseng national standards and the standardization process, and makes a detailed comparative analysis of the categories, standard contents, index selection, age, implementation and promotion status of the Chinese and Korean ginseng standards. The development disadvantages of ginseng industry standardization were displayed. And we give our advises on the standard revision, implementation of China's ginseng industry standardization, hoping to enhance the competitiveness of China's ginseng industry. Copyright© by the Chinese Pharmaceutical Association.

Intermittent hypoxia training as non-pharmacologic therapy for cardiovascular diseases: Practical analysis on methods and equipment

PubMed Central

Serebrovskaya, Tatiana V

2016-01-01

The global industrialization has brought profound lifestyle changes and environmental pollutions leading to higher risks of cardiovascular diseases. Such tremendous challenges outweigh the benefits of major advances in pharmacotherapies (such as statins, antihypertensive, antithrombotic drugs) and exacerbate the public healthcare burdens. One of the promising complementary non-pharmacologic therapies is the so-called intermittent hypoxia training (IHT) via activation of the human body's own natural defense through adaptation to intermittent hypoxia. This review article primarily focuses on the practical questions concerning the utilization of IHT as a non-pharmacologic therapy against cardiovascular diseases in humans. Evidence accumulated in the past five decades of research in healthy men and patients has suggested that short-term daily sessions consisting 3–4 bouts of 5–7 min exposures to 12–10% O2 alternating with normoxic durations for 2–3 weeks can result in remarkable beneficial effects in treatment of cardiovascular diseases such as hypertension, coronary heart disease, and heart failure. Special attentions are paid to the therapeutic effects of different IHT models, along with introduction of a variety of specialized facilities and equipment available for IHT, including hypobaric chambers, hypoxia gas mixture deliver equipment (rooms, tents, face masks), and portable rebreathing devices. Further clinical trials and thorough evaluations of the risks versus benefits of IHT are much needed to develop a series of standardized and practical guidelines for IHT. Taken together, we can envisage a bright future for IHT to play a more significant role in the preventive and complementary medicine against cardiovascular diseases. PMID:27407098

76 FR 70680 - Small Business Size Standards: Real Estate and Rental and Leasing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-15

... industries and one sub- industry in North American Industry Classification System (NAICS) Sector 53, Real... industries grouped by NAICS Sector. SBA issued a White Paper entitled ``Size Standards Methodology'' and published in the October 21, 2009 issue of the Federal Register. That ``Size Standards Methodology'' is...

78 FR 42821 - Agency Information Collection (Technical Industry Standards) Activities Under OMB Review

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-17

... (Technical Industry Standards) Activities Under OMB Review AGENCY: Office of Acquisition and Logistics... Affairs Acquisition Regulation (VAAR) Provision 852.211-72 (formerly 852.211-75), Technical Industry.... Abstract: VAAR provision 852.211-72, Technical Industry Standards, requires items offered for sale to VA...

48 CFR 19.303 - Determining North American Industry Classification System codes and size standards.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Industry Classification System codes and size standards. 19.303 Section 19.303 Federal Acquisition... of Small Business Status for Small Business Programs 19.303 Determining North American Industry... North American Industry Classification System (NAICS) code and related small business size standard and...

Asymmetric bioreduction of activated alkenes to industrially relevant optically active compounds

PubMed Central

Winkler, Christoph K.; Tasnádi, Gábor; Clay, Dorina; Hall, Mélanie; Faber, Kurt

2012-01-01

Ene-reductases from the ‘Old Yellow Enzyme’ family of flavoproteins catalyze the asymmetric reduction of various α,β-unsaturated compounds at the expense of a nicotinamide cofactor. They have been applied to the synthesis of valuable enantiopure products, including chiral building blocks with broad industrial applications, terpenoids, amino acid derivatives and fragrances. The combination of these highly stereoselective biocatalysts with a cofactor recycling system has allowed the development of cost-effective methods for the generation of optically active molecules, which is strengthened by the availability of stereo-complementary enzyme homologues. PMID:22498437

49 CFR 231.35 - Procedure for modification of an approved industry safety appliance standard for new railcar...

Code of Federal Regulations, 2013 CFR

2013-10-01

... industry safety appliance standard for new construction of railroad cars, locomotives, tenders, or other... 49 Transportation 4 2013-10-01 2013-10-01 false Procedure for modification of an approved industry... TRANSPORTATION RAILROAD SAFETY APPLIANCE STANDARDS § 231.35 Procedure for modification of an approved industry...

49 CFR 231.35 - Procedure for modification of an approved industry safety appliance standard for new railcar...

Code of Federal Regulations, 2014 CFR

2014-10-01

... industry safety appliance standard for new construction of railroad cars, locomotives, tenders, or other... 49 Transportation 4 2014-10-01 2014-10-01 false Procedure for modification of an approved industry... TRANSPORTATION RAILROAD SAFETY APPLIANCE STANDARDS § 231.35 Procedure for modification of an approved industry...

49 CFR 231.35 - Procedure for modification of an approved industry safety appliance standard for new railcar...

Code of Federal Regulations, 2012 CFR

2012-10-01

... industry safety appliance standard for new construction of railroad cars, locomotives, tenders, or other... 49 Transportation 4 2012-10-01 2012-10-01 false Procedure for modification of an approved industry... TRANSPORTATION RAILROAD SAFETY APPLIANCE STANDARDS § 231.35 Procedure for modification of an approved industry...

49 CFR 231.35 - Procedure for modification of an approved industry safety appliance standard for new railcar...

Code of Federal Regulations, 2011 CFR

2011-10-01

... industry safety appliance standard for new construction of railroad cars, locomotives, tenders, or other... 49 Transportation 4 2011-10-01 2011-10-01 false Procedure for modification of an approved industry... TRANSPORTATION RAILROAD SAFETY APPLIANCE STANDARDS § 231.35 Procedure for modification of an approved industry...

[Clinical investigation of basophil activation test as a complementary test for house dust mite allergen].

PubMed

Ren, H L; Li, J D; Miao, Y H; Xu, T

2018-03-01

Objective: To investigate the clinical application of glass micro fiber basophil activation test (BAT) used as a complementary test for house dust mite allergen. Method: Forty patients with clinical diagnosed allergic rhinitis was test by three methods for house dust mite allergen, skin prick test(SPT),Immuno CAP sIgE, and BAT in vitro. The sensitivity and specificity of glass micro fiber were accessed, and the consistency between BAT, SPT, and Immuno sIgE was analyzed. As in vivo provocation was not performed, gold standard is regarded as the combination of medical history and positive reports of SPT and/or ImmunoCAP sIgE test. Result: Twentythree patients are diagnosed as house dust mite allergic rhinitis by gold standard. The sensitivity and specificity of glass micro fiber BAT were 60.9% and 88.2%, the sensitivity of SPT and sIgE was 87.0% and sIgE 73.9%. The correlation rates between BAT with SPT is 0.67( P <0.05), and sIgE 0.55( P <0.05). The accuracy, predictive value of positive and negative of BAT are 0.47,60.9%,88.2%.The Kappa values of BAT, SPT and sIgE with gold standard are 0.47,0.86,0.71. Conclusion: As a complementary test for house dust mite allergic rhinitis, BAT have a good consistency with SPT and sIgE, while as it has only moderate consistency with "gold standard", further studies are needed to prove its clinical significance. Copyright© by the Editorial Department of Journal of Clinical Otorhinolaryngology Head and Neck Surgery.

Digital optical tape: Technology and standardization issues

NASA Technical Reports Server (NTRS)

Podio, Fernando L.

1996-01-01

During the coming years, digital data storage technologies will continue an aggressive growth to satisfy the user's need for higher storage capacities, higher data transfer rates and long-term archival media properties. Digital optical tape is a promising technology to satisfy these user's needs. As any emerging data storage technology, the industry faces many technological and standardization challenges. The technological challenges are great, but feasible to overcome. Although it is too early to consider formal industry standards, the optical tape industry has decided to work together by initiating prestandardization efforts that may lead in the future to formal voluntary industry standards. This paper will discuss current industry optical tape drive developments and the types of standards that will be required for the technology. The status of current industry prestandardization efforts will also be discussed.

77 FR 7489 - Small Business Size Standards: Professional, Technical, and Scientific Services

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-10

... standards for the remaining industries in NAICS Sector 54. This rule also removes ``Map Drafting'' as the... for public comment in the Federal Register on March 16, 2011 (76 FR 14323), which proposed to increase the size standards for 35 industries and one sub-industry in NAICS Sector 54 and one industry in NAICS...

Herbal medicine for low back pain: a Cochrane review.

PubMed

Gagnier, Joel J; van Tulder, Maurits W; Berman, Brian; Bombardier, Claire

2007-01-01

A systematic review of randomized controlled trials. To determine the effectiveness of herbal medicine compared with placebo, no intervention, or "standard/accepted/conventional treatments" for nonspecific low back pain. Low back pain is a common condition and a substantial economic burden in industrialized societies. A large proportion of patients with chronic low back pain use complementary and alternative medicine (CAM) and/or visit CAM practitioners. Several herbal medicines have been purported for use in low back pain. The following databases were searched: Medline (1966 to April 2003), Embase (1980 to April 2003), Cochrane Controlled Trials Register (Issue 1, 2003), and Cochrane Complementary Medicine (CM) field Trials Register. Additionally, reference lists in review articles, guidelines, and in the retrieved trials were checked. Randomized controlled trials (RCTs), using adults (>18 years of age) suffering from acute, subacute, or chronic nonspecific low back pain. Types of interventions included herbal medicines defined as a plant that is used for medicinal purposes in any form. Primary outcome measures were pain and function. Two reviewers (J.J.G. and M.W.T.) conducted electronic searches in all databases. One reviewer (J.J.G.) contacted content experts and acquired relevant citations. Authors, title, subject headings, publication type, and abstract of the isolated studies were downloaded or a hard copy was retrieved. Methodologic quality and clinical relevance were assessed separately by two individuals (J.J.G. and M.W.T.). Disagreements were resolved by consensus. Ten trials were included in this review. Two high-quality trials utilizing Harpagophytum procumbens (Devil's claw) found strong evidence for short-term improvements in pain and rescue medication for daily doses standardized to 50 mg or 100 mg harpagoside with another high-quality trial demonstrating relative equivalence to 12.5 mg per day of rofecoxib. Two moderate-quality trials utilizing Salix alba (White willow bark) found moderate evidence for short-term improvements in pain and rescue medication for daily doses standardized to 120 mg or 240 mg salicin with an additional trial demonstrating relative equivalence to 12.5 mg per day of rofecoxib. Three low-quality trials using Capsicum frutescens (Cayenne) using various topical preparations found moderate evidence for favorable results against placebo and one trial found equivalence to a homeopathic ointment. Harpagophytum procumbens, Salix alba, and Capsicum frutescens seem to reduce pain more than placebo. Additional trials testing these herbal medicines against standard treatments will clarify their equivalence in terms of efficacy. The quality of reporting in these trials was generally poor; thus, trialists should refer to the CONSORT statement in reporting clinical trials of herbal medicines.

29 CFR 510.21 - SIC codes.

Code of Federal Regulations, 2012 CFR

2012-07-01

... annual Census of Manufacturing Industries as a source of average hourly wage data by industry. Industries in that census are organized by Standard Industrial Classification (SIC), the statistical... stated that data “should be at a level of specificity comparable to the four digit Standard Industry Code...

29 CFR 510.21 - SIC codes.

Code of Federal Regulations, 2014 CFR

2014-07-01

... annual Census of Manufacturing Industries as a source of average hourly wage data by industry. Industries in that census are organized by Standard Industrial Classification (SIC), the statistical... stated that data “should be at a level of specificity comparable to the four digit Standard Industry Code...

29 CFR 510.21 - SIC codes.

Code of Federal Regulations, 2013 CFR

2013-07-01

... annual Census of Manufacturing Industries as a source of average hourly wage data by industry. Industries in that census are organized by Standard Industrial Classification (SIC), the statistical... stated that data “should be at a level of specificity comparable to the four digit Standard Industry Code...

29 CFR 510.21 - SIC codes.

Code of Federal Regulations, 2011 CFR

2011-07-01

... annual Census of Manufacturing Industries as a source of average hourly wage data by industry. Industries in that census are organized by Standard Industrial Classification (SIC), the statistical... stated that data “should be at a level of specificity comparable to the four digit Standard Industry Code...

Effect of pH and complementary ion concentration on nitrate removal using puroliteA400 Resin impregnated Cu in batch system

NASA Astrophysics Data System (ADS)

Turmuzi, M.; Tarigan, Z. N.; Nadapdap, L.; Batubara, F.

2018-02-01

The total nitrogen content in water bodies should be below 50 mg NO3 -/L (11.3 mgN/l) World Health Organization (WHO) 2006. The content of nitrogen exceeding the quality standard threshold will cause damage to the aquatic ecosystem and be carcinogenic to humans. The Purolite A-400 resin will be modified with Cu metal by batch method to see the adsorption allowance of nitrate in synthetic liquid waste with nitrate concentration of 50 mg/l. This study will evaluate the effect of pH and complementary ions on the adsorption process. From the result of the research, the second order pseudo model is the most suitable adsorption kinetics model. For the adsorption isotherms the most suitable model is the Freundlich adsorption isotherm model. The optimum pH conditions were at the range of 8.5. The addition of complementary ions sulfate and phosphate did not show any significant change, but sulfate is the most effective complementary ion with a content of 20 mg/l.

Foundations for Excellence in the Chemical Process Industries. Voluntary Industry Standards for Chemical Process Industries Technical Workers.

ERIC Educational Resources Information Center

Hofstader, Robert; Chapman, Kenneth

This document discusses the Voluntary Industry Standards for Chemical Process Industries Technical Workers Project and issues of relevance to the education and employment of chemical laboratory technicians (CLTs) and process technicians (PTs). Section 1 consists of the following background information: overview of the chemical process industries,…

Ohio's Resource Guide for Voluntary Skill Standards.

ERIC Educational Resources Information Center

Springfield-Clark Joint Vocational School, Springfield, OH.

Voluntary skill standards are industry-based, industry-verified performance specifications that identify the knowledge, skills, and abilities individuals need for success in an industry. This resource guide is designed to raise awareness of voluntary skill standards, identify their benefits, and encourage stakeholder involvement in implementation…

Integrative medicine for cancer treatment

MedlinePlus

... page: //medlineplus.gov/ency/patientinstructions/000932.htm Integrative medicine for cancer treatment To use the sharing features on this page, ... for cancer includes surgery, chemotherapy , radiation , and biological therapy . Integrative medicine is complementary care used alongside standard care. It ...

The need for guidelines and the use of economic evidence in decision-making in Thailand: lessons learnt from the development of the national list of essential drugs.

PubMed

Wibulpolprasert, Suwit

2008-06-01

Since 2004, the Subcommittee for Development of the National List of Essential Drugs (NLED) has embarked upon an historical evolution of applying evidence to the revision, inclusion and exclusion of medicines into and from the list. Then, the revision of the 2008 NLED was the first time in Thai history where the drug selection process in Thailand formally incorporated pharmacoeconomics. At present, the lack of a standard methodology for conducting economic evaluation is a major barrier that diminishes the potential use of economic evidence. The development of national economic evaluation guidelines by a group of national experts was subsequently endorsed by members in the Subcommittee as useful tools for future NLED revision. They emphasize that these guidelines should be applied not only to those evaluations conducted by public institutions but also by private pharmaceutical companies that often use this evidence for their marketing, or even for future requirements of economic information from industry, as complementary evidence for inclusion of health technology.

Solution-Processed Carbon Nanotube True Random Number Generator.

PubMed

Gaviria Rojas, William A; McMorrow, Julian J; Geier, Michael L; Tang, Qianying; Kim, Chris H; Marks, Tobin J; Hersam, Mark C

2017-08-09

With the growing adoption of interconnected electronic devices in consumer and industrial applications, there is an increasing demand for robust security protocols when transmitting and receiving sensitive data. Toward this end, hardware true random number generators (TRNGs), commonly used to create encryption keys, offer significant advantages over software pseudorandom number generators. However, the vast network of devices and sensors envisioned for the "Internet of Things" will require small, low-cost, and mechanically flexible TRNGs with low computational complexity. These rigorous constraints position solution-processed semiconducting single-walled carbon nanotubes (SWCNTs) as leading candidates for next-generation security devices. Here, we demonstrate the first TRNG using static random access memory (SRAM) cells based on solution-processed SWCNTs that digitize thermal noise to generate random bits. This bit generation strategy can be readily implemented in hardware with minimal transistor and computational overhead, resulting in an output stream that passes standardized statistical tests for randomness. By using solution-processed semiconducting SWCNTs in a low-power, complementary architecture to achieve TRNG, we demonstrate a promising approach for improving the security of printable and flexible electronics.

Examining nanoparticle assemblies using high spatial resolution x-ray microtomography

NASA Astrophysics Data System (ADS)

Jenneson, P. M.; Luggar, R. D.; Morton, E. J.; Gundogdu, O.; Tüzün, U.

2004-09-01

An experimental system has been designed to examine the assembly of nanoparticles in a variety of process engineering applications. These applications include the harvesting from solutions of nanoparticles into green parts, and the subsequent sintering into finished components. The system is based on an x-ray microtomography with a spatial resolution down to 5μm. The theoretical limitations in x-ray imaging are considered to allow experimental optimization. A standard nondestructive evaluation type apparatus with a small focal-spot x-ray tube, high-resolution complementary metal oxide semiconductor flat-panel pixellated detector, and a mechanical rotational stage is used to image the static systems. Dynamic sintering processes are imaged using the same x-ray source and detector but a custom rotational stage which is contained in an environmental chamber where the temperature, atmospheric pressure, and compaction force can be controlled. Three-dimensional tomographic data sets are presented here for samples from the pharmaceutical, nutraceutical, biotechnology, and nanoparticle handling industries and show the microscopic features and defects which can be resolved with the system.

77 FR 16769 - Energy Conservation Program for Certain Industrial Equipment: Energy Conservation Standards and...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-22

... Conservation Program for Certain Industrial Equipment: Energy Conservation Standards and Test Procedures for...-Conditioning Engineers (ASHRAE)/Illuminating Engineering Society of North America (IESNA) Standard 90.1-2010... Industrial Equipment, which includes the commercial heating, air-conditioning, and water-heating equipment...

Foreign direct investment outflows in the forest products industry: the case of the United States and Japan

Treesearch

R.V. Nagubadi; D. Zhang

2008-01-01

This paper investigates the determinants of foreign direct investment (FDI) outflows from two major forest product importing countries: the U.S. and Japan. Exchange rate, per capita income, cost of capital, and cost of labour in host countries have significant impacts on the FDI outflows from these two countries. A complementary relationship is found between forest...

Species authentication and geographical origin discrimination of herbal medicines by near infrared spectroscopy: A review.

PubMed

Wang, Pei; Yu, Zhiguo

2015-10-01

Near infrared (NIR) spectroscopy as a rapid and nondestructive analytical technique, integrated with chemometrics, is a powerful process analytical tool for the pharmaceutical industry and is becoming an attractive complementary technique for herbal medicine analysis. This review mainly focuses on the recent applications of NIR spectroscopy in species authentication of herbal medicines and their geographical origin discrimination.

Department Of Defense Science And Technology Invigoration

DTIC Science & Technology

2002-02-01

38 Army Science Board, Summer Study, 1982. 39 Hamel, G. and Prahalad , C.K., “ Strategic Intent ,” Harvard Business Review, May-June 1989, 63-76... strategic intent (aggressively stretching resources rather than fitting resources) and core competence (collective learning in an organization...system and defense-related industry. 3. Develop a strategic plan for the DOD S&T infrastructure of the future, defining the complementary roles of

Composite Structure with Origami Core

DTIC Science & Technology

2016-07-19

spherical linkages using the mechanism theory . Precise motions of origami were identified. In the second case, we identified a link between thick panel...operating reversibly by a coupled tension-to-torsion actuation mechanism . Using theory , we quantitatively explain the complementary effects of an increase in...structures. Our research has paved the way for much broader utilization of such structures in aeronautics and aerospace industries. 15. SUBJECT TERMS

Using the Clinical Interview as a Complementary Assessment for Minority Elementary Students to Determine Their In-Depth Understanding of Mathematical Concepts

ERIC Educational Resources Information Center

Crisp, Nicola Elinor

2013-01-01

While some African American students perform as well as or better than their White peers on standardized tests, African Americans as a group attain lower scores on standardized tests than their White peers. This phenomenon has been addressed extensively in educational research. However, not much empirical research has been conducted to investigate…

Optical media standards for industry

NASA Technical Reports Server (NTRS)

Hallam, Kenneth J.

1993-01-01

Optical storage is a new and growing area of technology that can serve to meet some of the mass storage needs of the computer industry. Optical storage is characterized by information being stored and retrieved by means of diode lasers. When most people refer to optical storage, they mean rotating disk media, but there are 1 or 2 products that use lasers to read and write to tape. Optical media also usually means removable media. Because of its removability, there is a recognized need for standardization, both of the media and of the recording method. Industry standards can come about in one or more different ways. An industry supported body can sanction and publish a formal standard. A company may ship enough of a product that it so dominates an application or industry that it acquires 'standard' status without an official sanction. Such de facto standards are almost always copied by other companies with varying degrees of success. A governmental body can issue a rule or law that requires conformance to a standard. The standard may have been created by the government, or adopted from among many proposed by industry. These are often known as de jure standards. Standards are either open or proprietary. If approved by a government or sanctioning body, the standard is open. A de facto standard may be either open or proprietary. Optical media is too new to have de facto standards accepted by the marketplace yet. The proliferation of non-compatible media types in the last 5 years of optical market development have convinced many of the need for recognized media standards.

48 CFR 219.303 - Determining North American Industry Classification System (NAICS) codes and size standards.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 3 2011-10-01 2011-10-01 false Determining North American Industry Classification System (NAICS) codes and size standards. 219.303 Section 219.303 Federal... Programs 219.303 Determining North American Industry Classification System (NAICS) codes and size standards...

78 FR 1636 - Semiannual Regulatory Agenda

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-08

... Business Size 3245-AG51 Standards for Other Industries With Employee- Based Size Standards not Part of... applicants that do not meet the small business size standards for their industries. For the 504 Program, the... U.S.C. 632(a) Abstract: SBA has received numerous comments from businesses, industry associations...

48 CFR 219.303 - Determining North American Industry Classification System (NAICS) codes and size standards.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 48 Federal Acquisition Regulations System 3 2012-10-01 2012-10-01 false Determining North American Industry Classification System (NAICS) codes and size standards. 219.303 Section 219.303 Federal... Programs 219.303 Determining North American Industry Classification System (NAICS) codes and size standards...

48 CFR 219.303 - Determining North American Industry Classification System (NAICS) codes and size standards.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 3 2014-10-01 2014-10-01 false Determining North American Industry Classification System (NAICS) codes and size standards. 219.303 Section 219.303 Federal... Determining North American Industry Classification System (NAICS) codes and size standards. Contracting...

48 CFR 219.303 - Determining North American Industry Classification System (NAICS) codes and size standards.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 3 2013-10-01 2013-10-01 false Determining North American Industry Classification System (NAICS) codes and size standards. 219.303 Section 219.303 Federal... Determining North American Industry Classification System (NAICS) codes and size standards. Contracting...

National Skills Standards Development Program: Organization and Operation of Technical Committees To Develop National Skill Standards for Competency in the Electronics Industry. The Third Party Summative Evaluation of the Electronic Industries Foundation Project. Phase I & II. Final Report.

ERIC Educational Resources Information Center

Losh, Charles

The Electronics Industries Foundation was awarded a project to develop national entry-level standards and a certification system. Ten specialties were included: automotive electronics, avionics, biomedical electronics, business machines, consumer products electronics, general electronics, industrial electronics, instrumentation, microcomputer, and…

Visual Decision Support Tool for Supporting Asset ...

EPA Pesticide Factsheets

Abstract:Managing urban water infrastructures faces the challenge of jointly dealing with assets of diverse types, useful life, cost, ages and condition. Service quality and sustainability require sound long-term planning, well aligned with tactical and operational planning and management. In summary, the objective of an integrated approach to infrastructure asset management is to assist utilities answer the following questions:•Who are we at present?•What service do we deliver?•What do we own?•Where do we want to be in the long-term?•How do we get there?The AWARE-P approach (www.aware-p.org) offers a coherent methodological framework and a valuable portfolio of software tools. It is designed to assist water supply and wastewater utility decision-makers in their analyses and planning processes. It is based on a Plan-Do-Check-Act process and is in accordance with the key principles of the International Standards Organization (ISO) 55000 standards on asset management. It is compatible with, and complementary to WERF’s SIMPLE framework. The software assists in strategic, tactical, and operational planning, through a non-intrusive, web-based, collaborative environment where objectives and metrics drive IAM planning. It is aimed at industry professionals and managers, as well as at the consultants and technical experts that support them. It is easy to use and maximizes the value of information from multiple existing data sources, both in da

Complementary and Alternative Medicine Use Among Allergy Practices: Results of a Nationwide Survey of Allergists.

PubMed

Land, Michael H; Wang, Julie

The use of complementary and alternative practices in the field of Allergy/Immunology is growing. A recent survey of American Academy of Allergy, Asthma, and Immunology members examining patterns of complementary and alternative medicine (CAM) use and adverse effects from CAM revealed that a majority of practitioners (81% of respondents) had patients who are using CAM therapies over conventional treatments and many practitioners (60% of survey respondents) have encountered patients experiencing adverse reactions. During routine office visits, a majority of practitioners do not ask patients about CAM use, and when they do, most do not have a standard intake form to take a CAM history. There is a strong need to increase knowledge and improve measures to prevent adverse reactions to CAMs. Copyright © 2017 American Academy of Allergy, Asthma & Immunology. Published by Elsevier Inc. All rights reserved.

Complementary and Alternative Medicine for Posttraumatic Stress Disorder Symptoms: A Systematic Review.

PubMed

Wahbeh, Helané; Senders, Angela; Neuendorf, Rachel; Cayton, Julien

2014-07-01

To (1) characterize complementary and alternative medicine studies for posttraumatic stress disorder symptoms, (2) evaluate the quality of these studies, and (3) systematically grade the scientific evidence for individual CAM modalities for posttraumatic stress disorder. Systematic review. Eight data sources were searched. Selection criteria included any study design assessing posttraumatic stress disorder outcomes and any complementary and alternative medicine intervention. The body of evidence for each modality was assessed with the Natural Standard evidence-based, validated grading rationale. Thirty-three studies (n = 1329) were reviewed. Scientific evidence of benefit for posttraumatic stress disorder was strong for repetitive transcranial magnetic stimulation and good for acupuncture, hypnotherapy, meditation, and visualization. Evidence was unclear or conflicting for biofeedback, relaxation, Emotional Freedom and Thought Field therapies, yoga, and natural products. Considerations for clinical applications and future research recommendations are discussed. © The Author(s) 2014.

Unproven diagnostic procedures in IgE-mediated allergic diseases.

PubMed

Niggemann, B; Grüber, C

2004-08-01

A considerable body of literature on therapeutic aspects of complementary and alternative medicine has been published in recent years, but little is known on diagnostic procedures. This short review lists complementary and alternative diagnostic procedures for the diagnosis of allergic diseases and presents an assessment of their usefulness for the daily practice. The review of the literature revealed that neither the determination of specific immunoglobulin G-antibodies in serum, the hair-analysis, the cytotoxic test, kinesiology, iridology, or electrodermal testing represent useful tests for the daily practice. To date, no complementary or alternative diagnostic procedure can be recommended as a meaningful element in the diagnostic work-up of allergic diseases. This is especially true for food allergy: properly performed oral food challenges still represent the gold standard for implementing specific diets in food allergic individuals. Ineffective diagnostic approaches may be costly for the consumer and delay appropriate therapy.

Regional Variation in Use of Complementary Health Approaches by U.S. Adults

MedlinePlus

... part of their yoga exercise. Data sources and methods Data from the 2012 NHIS were used for ... sampling design of NHIS. The Taylor series linearization method was chosen for estimation of standard errors. Differences ...

The Role of National Industry-Based Skill Standards in the Development, Implementation, and Assessment of Community College Curriculum

ERIC Educational Resources Information Center

Aragon, Steven R.; Woo, Hui-Jeong; Marvel, Matthew R.

2005-01-01

Using a descriptive survey design, a nationally representative sample of community college career and technical deans were asked to complete a questionnaire that assessed awareness and implementation of industry-based skill standards. For those institutions implementing industry-based skill standards, the questionnaire sought additional…

Long-term Internship through Cooperative Education with Regional Industries

NASA Astrophysics Data System (ADS)

Takahashi, Kenzo; Hase, Hiroyuki

The long term internship is one of special educational programs for graduate students of Graduate School of Engineering in University of Fukui. This is a collaborative program between university and industries where selected post-graduate students are dispatched to companies for a long term and educated in real business environments. It is the final goal of the program to develop sophisticated specialists who would be able to catch the business strategy in industries and solve any problems by themselves. The program is managed in a semester (6 months) and contains 1.5 month prior education of preliminary special knowledge, ethics and secrecy, about 3 month dispatch with long-term internship, and 1.5 month post-education for complementary education and presentation. This paper presents the effect of this program which has been evolving since 2005.

Promoting the safety performance of industrial radiography using a quantitative assessment system.

PubMed

Kardan, M R; Mianji, F A; Rastkhah, N; Babakhani, A; Azad, S Borhan

2006-12-01

The increasing number of industrial radiographers and their considerable occupational exposure has been one of the main concerns of the Iran Nuclear Regulatory Authority (INRA) in recent years. In 2002, a quantitative system of evaluating the safety performance of licensees and a complementary enforcement system was introduced by the National Radiation Protection Department (NRPD). Each parameter of the practice is given a weighting factor according to its importance to safety. Assessment of the licensees is done quantitatively by summing up their scores using prepared tables. Implementing this system of evaluation showed a considerable decrease in deficiencies in the various centres. Tables are updated regularly as a result of findings during the inspections. This system is used in addition to enforcement to promote safety performance and to increase the culture of safety in industrial radiography.

Standards for contamination control

NASA Astrophysics Data System (ADS)

Borson, Eugene N.

2004-10-01

Standards are an important component of national and international trade. We depend upon standards to assure that manufactured parts will work together, wherever they are made, and that we speak the same technical language, no matter what language we speak. Understanding is important in order to know when to take exceptions to or tailor the standard to fit the job. Standards that are used in contamination control have increased in numbers over the years as more industries have had to improve their manufacturing processes to enhance reliability or yields of products. Some older standards have been revised to include new technologies, and many new standards have been developed. Some of the new standards were written for specific industries while others apply to many industries. Many government standards have been replaced with standards from nongovernmental standards organizations. This trend has been encouraged by U.S. law that requires the government to use commercial standards where possible. This paper reviews some of the more important standards for the aerospace industry, such as IEST-STD-CC1246 and ISO 14644-1, that have been published in recent years. Benefits, usage, and problems with some standards will be discussed. Some standards are referenced, and websites of some standards organizations are listed.

[Antibiotics prescription and complementary tests based on frequency of use and loyalty in Primary Care].

PubMed

Balaguer Martínez, Josep Vicent; Del Castillo Aguas, Guadalupe; Gallego Iborra, Ana

2017-12-30

To assess whether there is a relationship between the prescription of antibiotics and the performance of complementary tests with frequency of use and loyalty in Primary Care. Analytical descriptive study performed through a network of Primary Care sentinel paediatricians (PAPenRed). Each paediatrician reviewed the spontaneous visits (in Primary Care and in Emergency Departments) of 15 patients for 12 months, randomly chosen from their quota. The prescription of antibiotics and the complementary tests performed on these patients were also collected. A total of 212 paediatricians took part and reviewed 2,726 patients. It was found that 8.3% were moderate over-users (mean + 1-2 standard deviations) and 5.2% extreme over-users (mean + 2 standard deviations). Almost half (49.6%) were high-loyalty patients (more than 75% of visits with their doctor). The incidence ratio of antibiotic prescriptions for moderate over-users was 2.13 (1.74-2.62) and 3.25 (2.55-4.13) for extreme over-users, compared to non-over-user children. The incidence ratio for the diagnostic tests were 2.25 (1.86-2.73) and 3.48 (2.78-4.35), respectively. The incidence ratios for antibiotic prescription were 1.34 (1.16-1.55) in patients with medium-high loyalty, 1.45 (1.15-1.83) for medium-low loyalty, and 1.08 (0.81-1.44) for those with low loyalty, compared to patients with high loyalty. The incidence ratios to perform diagnostic tests were 1.46 (1.27-1.67); 1.60 (1.28 - 2.00), and 0.84 (0.63-1.12), respectively. Antibiotics prescription and complementary tests were significantly related to medical overuse. They were also related to loyalty, but less significantly. Copyright © 2017. Publicado por Elsevier España, S.L.U.

Tips and Tricks of Incorporating Industry Standards into a Library Collection

DOE Office of Scientific and Technical Information (OSTI.GOV)

Abbott, Jennifer; Sandberg, Tami

Professional literature on the incorporation of industry standards into a library collection is somewhat limited. The objective of this presentation is to discuss the intricate details of acquiring, managing, and delivering electronic industry standards to library patrons in a seamless manner. Lessons learned regarding vendor selection and license agreements will also be discussed. Results from a survey administer at the National Renewable Energy Laboratory will be used to analyze how collection policies can properly be developed to incorporate industry standards into a library setting. The key points of acquisition decisions, avoidance of liability issues, and cost will be addressed.

Fossil fuels in a sustainable energy future

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bechtel, T.F.

1995-12-01

The coal industry in the United States has become a world leader in safety, productivity, and environmental protection in the mining of coal. The {open_quotes}pick-and-shovel{close_quotes} miner with mangled limbs and black lung disease has been replaced by the highly skilled technicians that lead the world in tons per man-hour. The gob piles, polluted streams, and scared land are a thing of the past. The complementary efforts of the DOE and EPRI-funded programs in coal utilization R&D and the Clean Coal Technology Program commercial demonstrations, have positioned the power generation industry to utilize coal in a way that doesn`t pollute themore » air or water, keeps electrical power costs low, and avoids the mountains of waste material. This paper reviews the potential for advanced coal utilization technologies in new power generation applications as well as the repowering of existing plants to increase their output, raise their efficiency, and reduce pollution. It demonstrates the potential for these advanced coal-fueled plants to play a complementary role in future planning with the natural gas and oil fired units currently favored in the market place. The status of the US program to demonstrate these technologies at commercial scale is reviewed in some detail.« less

Complementary or competing climates? Examining the interactive effect of service and ethical climates on company-level financial performance.

PubMed

Myer, Adam T; Thoroughgood, Christian N; Mohammed, Susan

2016-08-01

By bending rules to please their customers, companies with high service climates may be less ethical but ultimately more profitable. In this article, we pose the question of whether being ethical comes at a cost to profits in customer-oriented firms. Despite the organizational reality that multiple climates coexist at a given time, research has largely ignored these types of questions, and the simultaneous analysis of multiple climate dimensions has received little empirical attention to date. Given their scientific and practical importance, this study tested complementary and conflicting perspectives regarding interactions between service (outcome-focused) and ethical (process-focused) climates on company-level financial performance. Drawing on a sample of 16,862 medical sales representatives spread across 77 subsidiary companies of a large multinational corporation in the health care product industry, we found support for a complementary view. More precisely, results revealed that profitability was enhanced, not diminished, in service-oriented firms that also stressed the importance of ethics. Results suggest studying the interactive effects of multiple climates is a more fruitful approach than examining main effects alone. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

76 FR 81327 - National Emission Standards for Hazardous Air Pollutants From the Pulp and Paper Industry

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-27

... for each emission unit type (e.g., gas- or oil-fired paper machine dryers) based on the most common... 63 National Emission Standards for Hazardous Air Pollutants From the Pulp and Paper Industry...-AQ41 National Emission Standards for Hazardous Air Pollutants From the Pulp and Paper Industry AGENCY...

Magnetic characteristics of industrial dust from different sources of emission: A case study of Poland

NASA Astrophysics Data System (ADS)

Szuszkiewicz, Marcin; Magiera, Tadeusz; Kapička, Aleš; Petrovský, Eduard; Grison, Hanna; Gołuchowska, Beata

2015-05-01

Dust emission and deposition in topsoil have negative effect on individual components of the ecosystem. In addition to routine geochemical analyses, magnetic measurements may provide useful complementary information related to the type, concentration and grain-size distribution of the technogenic magnetic particles (TMPs) and thus the degree of contamination of the environment. The aim of this contribution is to use magnetic parameters in distinguishing dust from a wide range of sources of air pollution (power industry, cement, coke, ceramic industries and biomass combustion). We measured magnetic susceptibility, hysteresis parameters and thermomagnetic curves. Our results suggest that predominant component in tested samples is magnetite, only dust from coking plant and the combustion of lignite contained also maghemite and/or hematite. Mixture of sizes, ranging from fine single-domain to coarse multi-domain grains, was detected. Our results indicate that industrial dusts from various sources of emissions have different specific magnetic properties and magnetic measurements may provide very helpful information.

Pollution prevention options to meet impending MACT standards: A compendium

DOE Office of Scientific and Technical Information (OSTI.GOV)

Berglund, R.L.; Pickron, J.S.

1997-12-31

Under the Clean Air Act Amendments of 1990, the EPA was charged with developing MACT standards for a large group of operations representing a variety of different industry categories. While pollution prevention opportunities for meeting the requirements of the HON standards for the synthetic organic chemical manufacturing industry (SOCMI) and similar standards for the refining industry have drawn significant discussion and attention, little guidance for considering pollution prevention options for meeting other MACT standards have been provided. Yet, in working with companies to meet the requirements of proposed MACT standards for the shipbuilding, wood processing, plastics and gas processing industries,more » a number of pollution prevention opportunities for meeting these requirements were identified in early compliance strategies. This paper will provide a compendium of pollution prevention options for meeting these and other proposed and promulgated MACT standards.« less

Complementary therapies for labour and birth study: a randomised controlled trial of antenatal integrative medicine for pain management in labour

PubMed Central

Levett, Kate M; Smith, C A; Bensoussan, A; Dahlen, H G

2016-01-01

Objective To evaluate the effect of an antenatal integrative medicine education programme in addition to usual care for nulliparous women on intrapartum epidural use. Design Open-label, assessor blind, randomised controlled trial. Setting 2 public hospitals in Sydney, Australia. Population 176 nulliparous women with low-risk pregnancies, attending hospital-based antenatal clinics. Methods and intervention The Complementary Therapies for Labour and Birth protocol, based on the She Births and acupressure for labour and birth courses, incorporated 6 evidence-based complementary medicine techniques: acupressure, visualisation and relaxation, breathing, massage, yoga techniques, and facilitated partner support. Randomisation occurred at 24–36 weeks’ gestation, and participants attended a 2-day antenatal education programme plus standard care, or standard care alone. Main outcome measures Rate of analgesic epidural use. Secondary: onset of labour, augmentation, mode of birth, newborn outcomes. Results There was a significant difference in epidural use between the 2 groups: study group (23.9%) standard care (68.7%; risk ratio (RR) 0.37 (95% CI 0.25 to 0.55), p≤0.001). The study group participants reported a reduced rate of augmentation (RR=0.54 (95% CI 0.38 to 0.77), p<0.0001); caesarean section (RR=0.52 (95% CI 0.31 to 0.87), p=0.017); length of second stage (mean difference=−0.32 (95% CI −0.64 to 0.002), p=0.05); any perineal trauma (0.88 (95% CI 0.78 to 0.98), p=0.02) and resuscitation of the newborn (RR=0.47 (95% CI 0.25 to 0.87), p≤0.015). There were no statistically significant differences found in spontaneous onset of labour, pethidine use, rate of postpartum haemorrhage, major perineal trauma (third and fourth degree tears/episiotomy), or admission to special care nursery/neonatal intensive care unit (p=0.25). Conclusions The Complementary Therapies for Labour and Birth study protocol significantly reduced epidural use and caesarean section. This study provides evidence for integrative medicine as an effective adjunct to antenatal education, and contributes to the body of best practice evidence. Trial registration number ACTRN12611001126909. PMID:27406639

Current Status Of Ergonomic Standards

NASA Astrophysics Data System (ADS)

Lynch, Gene

1984-05-01

The last five years have seen the development and adoption of new kinds of standards for the display industry. This standardization activity deals with the complex human computer interface. Here the concerns involve health, safety, productivity, and operator well-being. The standards attempt to specify the "proper" use of visual display units. There is a wide range of implications for the display industry - as manufacturers of displays, as employers, and as users of visual display units. In this paper we examine the development of these standards, their impact on the display industry and implications for the future.

Machine Tool Advanced Skills Technology (MAST). Common Ground: Toward a Standards-Based Training System for the U.S. Machine Tool and Metal Related Industries. Volume 1: Executive Summary, of a 15-Volume Set of Skills Standards and Curriculum Training Materials for the Precision Manufacturing Industry.

ERIC Educational Resources Information Center

Texas State Technical Coll., Waco.

The Machine Tool Advanced Skills Technology (MAST) consortium was formed to address the shortage of skilled workers for the machine tools and metals-related industries. Featuring six of the nation's leading advanced technology centers, the MAST consortium developed, tested, and disseminated industry-specific skill standards and model curricula for…

Integrating standard operating procedures and industry notebook standards to evaluate students in laboratory courses.

PubMed

Wallert, Mark A; Provost, Joseph J

2014-01-01

To enhance the preparedness of graduates from the Biochemistry and Biotechnology (BCBT) Major at Minnesota State University Moorhead for employment in the bioscience industry we have developed a new Industry certificate program. The BCBT Industry Certificate was developed to address specific skill sets that local, regional, and national industry experts identified as lacking in new B.S. and B.A. biochemistry graduates. The industry certificate addresses concerns related to working in a regulated industry such as Good Laboratory Practices, Good Manufacturing Practices, and working in a Quality System. In this article we specifically describe how we developed a validation course that uses Standard Operating Procedures to describe grading policy and laboratory notebook requirements in an effort to better prepare students to transition into industry careers. © 2013 by The International Union of Biochemistry and Molecular Biology.

Status of emerging standards for data definitions and transfer in the petroleum industry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Winczewski, L.M.

1991-03-01

Leading-edge hardware and software to store, retrieve, process, analyze, visualize, and interpret geoscience and petroleum data are improving continuously. A babel of definitions and formats for common industry data items limits the overall effectiveness of these computer-aided exploration and production tools. Custom data conversion required to load applications causes delays and exposes data content to error and degradation. Emerging industry-wide standards for management of geoscience and petroleum-related data are poised to overcome long-standing internal barriers to the full exploitation of these high-tech hardware/software systems. Industry technical organizations, such as AAPG, SEG, and API, have been actively pursuing industry-wide standards formore » data transfer, data definitions, and data models. These standard-defining groups are non-fee and solicit active participation from the entire petroleum community. The status of the most active of these groups is presented here. Data transfer standards are being pursued within AAPG (AAPG-B Data Transfer Standard), API (DLIS, for log data) and SEG (SEG-DEF, for seismic data). Converging data definitions, models, and glossaries are coming from the Petroleum Industry Data Dictionary Group (PIDD) and from subcommittees of the AAPG Computer Applications Committee. The National Computer Graphics Association is promoting development of standards for transfer of geographically oriented data. The API Well-Number standard is undergoing revision.« less

Complementary and alternative medicine in child and adolescent psychiatry: legal considerations.

PubMed

Cohen, Michael H; Natbony, Suzanne R; Abbott, Ryan B

2013-07-01

The rising popularity of complementary and alternative medicine (CAM) in child and adolescent psychiatry raises unique ethical and legal concerns for psychiatrists and other conventional health care providers. This article explores these concerns and provides clinical advice for promoting patient health and safety while minimizing the psychiatrist's risk. Although any departure from the conventional standard of care is a potential risk, the risk of malpractice liability for practicing integrative medicine in child and adolescent psychiatry is low. CAM is most safely recommended from a legal standpoint when there is some published evidence of safety and efficacy. Copyright © 2013 Elsevier Inc. All rights reserved.

Complementary and Alternative Medicine (CAM): NCCAM Timeline—A Decade of Progress

MedlinePlus

... knee and serves as an effective complement to standard care. February 2006 - Research shows that the popular dietary supplement combination of glucosamine plus chondroitin sulfate did not provide significant relief from osteoarthritis among all participants but did relieve moderate-to- ...

Fotometria Hβ en el O.A.N. Aplicación a estrellas en regiones H II.

NASA Astrophysics Data System (ADS)

Lahulla, J. F.

Photoelectric Hβ photometry is reported for some UBVRI standard stars from the list of Neckel and Chini (1980). Complementary UBVRI and Hβ photometry was carried out for stars located in several H II regions.

Information Literacy and Digital Literacy: Competing or Complementary?

ERIC Educational Resources Information Center

Cordell, Rosanne Marie

2013-01-01

Digital literacy is a more recent concept than information literacy and can relate to multiple categories of library users in multiple types of libraries. Determining the relationship between information literacy and digital literacy is essential before revision of the ACRL "Standards" can proceed.

Integrating Standard Operating Procedures and Industry Notebook Standards to Evaluate Students in Laboratory Courses

ERIC Educational Resources Information Center

Wallert, Mark A.; Provost, Joseph J.

2014-01-01

To enhance the preparedness of graduates from the Biochemistry and Biotechnology (BCBT) Major at Minnesota State University Moorhead for employment in the bioscience industry we have developed a new Industry certificate program. The BCBT Industry Certificate was developed to address specific skill sets that local, regional, and national industry…

48 CFR 19.303 - Determining North American Industry Classification System (NAICS) codes and size standards.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Industry Classification System (NAICS) codes and size standards. 19.303 Section 19.303 Federal Acquisition... of Small Business Status for Small Business Programs 19.303 Determining North American Industry... user, the added text is set forth as follows: 19.303 Determining North American Industry Classification...

Design and quality standards for custom hybrid microcircuits

NASA Technical Reports Server (NTRS)

Allen, R. V.

1977-01-01

A hybrid microcircuit standard was developed after a thorough review of applicable NASA, military, industry, and technical society specifications and standards and compilation of comments from technical reviewers throughout the hybrid industry. The draft of the standard submitted to the technical reviewers, the comments from the reviewers, and the completed standard are discussed.

Analysis on effects of energy efficiency regulations & standards for industrial boilers in China

NASA Astrophysics Data System (ADS)

Liu, Ren; Chen, Lili; Zhao, Yuejin; Liu, Meng

2017-11-01

The industrial boilers in China are featured by large quantity, wide distribution, high energy consumption and heavy environmental pollution, which are key problems faced by energy conservation and environmental protection in China. Meanwhile, industrial boilers are important equipment for national economy and people’s daily life, and energy conservation gets through all segments from type selection, purchase, installation and acceptance to fuel management, operation, maintenance and service. China began to implement such national mandatory standards and regulations for industrial boiler as GB24500-2009 The Minimum Allowable Values of Energy Efficiency and Energy Efficiency Grades of Industrial Boilers and TSG G002-2010 Supervision Regulation on Energy-Saving Technology for Boilers since 2009, which obviously promote the development of energy conservation of industrial boilers, but there are also some problems with the rapid development of technologies for energy conservation of industrial boilers. In this paper, the implementation of energy efficiency standards for industrial boilers in China and the significance are analyzed based on survey data, and some suggestions are proposed for the energy efficiency standards for industrial boilers. Support by Project 2015424050 of Special Fund for quality control Research in the Public Interest

Status and Analysis on Effects of Energy Efficiency Standards for Industrial Boilers in China

NASA Astrophysics Data System (ADS)

Liu, Ren; Chen, Lili; Liu, Meng; Ding, Qing; Zhao, Yuejin

2017-11-01

Energy conservation and environmental protection is the basic policy of China, and is an important part of ecological civilization construction. The industrial boilers in China are featured by large quantity, wide distribution, high energy consumption and heavy environmental pollution, which are key problems faced by energy conservation and environmental protection in China. Meanwhile, industrial boilers are important equipment for national economy and people’s daily life, and energy conservation gets through all segments from type selection, purchase, installation and acceptance to fuel management, operation, maintenance and service. China began to implement such national mandatory standards and regulations for industrial boiler as GB24500-2009 The Minimum Allowable Values of Energy Efficiency and Energy Efficiency Grades of Industrial Boilers and TSG G002-2010 Supervision Regulation on Energy-Saving Technology for Boilers since 2009, which obviously promote the development of energy conservation of industrial boilers, but there are also some problems with the rapid development of technologies for energy conservation of industrial boilers. In this paper, the implementation of energy efficiency standards for industrial boilers in China and the significance are analyzed based on survey data, and some suggestions are proposed for the energy efficiency standards for industrial boilers.

Relevance of methods and standards for the assessment of measurement system performance in a High-Value Manufacturing Industry

NASA Astrophysics Data System (ADS)

Loftus, Pete; Giudice, Seb

2014-08-01

Measurements underpin the engineering decisions that allow products to be designed, manufactured, operated, and maintained. Therefore, the quality of measured data needs to be systematically assured to allow decision makers to proceed with confidence. The use of standards is one way of achieving this. This paper explores the relevance of international documentary standards to the assessment of measurement system capability in High Value Manufacturing (HVM) Industry. An internal measurement standard is presented which supplements these standards and recommendations are made for a cohesive effort to develop the international standards to provide consistency in such industrial applications.

77 FR 9945 - Draft Guidance for Industry on Providing Submissions in Electronic Format-Standardized Study Data...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-21

...] Draft Guidance for Industry on Providing Submissions in Electronic Format--Standardized Study Data... Submissions in Electronic Format--Standardized Study Data.'' This draft guidance establishes FDA's recommendation that sponsors and applicants submit nonclinical and clinical study data in a standardized...

Protein design in systems metabolic engineering for industrial strain development.

PubMed

Chen, Zhen; Zeng, An-Ping

2013-05-01

Accelerating the process of industrial bacterial host strain development, aimed at increasing productivity, generating new bio-products or utilizing alternative feedstocks, requires the integration of complementary approaches to manipulate cellular metabolism and regulatory networks. Systems metabolic engineering extends the concept of classical metabolic engineering to the systems level by incorporating the techniques used in systems biology and synthetic biology, and offers a framework for the development of the next generation of industrial strains. As one of the most useful tools of systems metabolic engineering, protein design allows us to design and optimize cellular metabolism at a molecular level. Here, we review the current strategies of protein design for engineering cellular synthetic pathways, metabolic control systems and signaling pathways, and highlight the challenges of this subfield within the context of systems metabolic engineering. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Heterointegration of Dissimilar Materials

DTIC Science & Technology

2015-07-28

computing capabilities. This has been possible due to the aggressive scaling undertaken by the Si industry for complementary metal oxide semiconductor...current due to quantum mechanical tunneling. After years of research and development, Hf- based gate dielectric with metal gates is now being used in CMOS...the oxide in this study was 1ML or ~3.9 Å/ min. The native SiO2 was removed using a low temperature process involving the deposition of Sr metal

40 CFR 403.13 - Variances from categorical pretreatment standards for fundamentally different factors.

Code of Federal Regulations, 2011 CFR

2011-07-01

... fundamentally different factors. (a) Definition. The term Requester means an Industrial User or a POTW or other... Pretreatment Standards, making them either more or less stringent, as they apply to a certain Industrial User within an industrial category or subcategory. This will only be done if data specific to that Industrial...

40 CFR 403.13 - Variances from categorical pretreatment standards for fundamentally different factors.

Code of Federal Regulations, 2013 CFR

2013-07-01

... fundamentally different factors. (a) Definition. The term Requester means an Industrial User or a POTW or other... Pretreatment Standards, making them either more or less stringent, as they apply to a certain Industrial User within an industrial category or subcategory. This will only be done if data specific to that Industrial...

40 CFR 403.13 - Variances from categorical pretreatment standards for fundamentally different factors.

Code of Federal Regulations, 2010 CFR

2010-07-01

... fundamentally different factors. (a) Definition. The term Requester means an Industrial User or a POTW or other... Pretreatment Standards, making them either more or less stringent, as they apply to a certain Industrial User within an industrial category or subcategory. This will only be done if data specific to that Industrial...

40 CFR 403.13 - Variances from categorical pretreatment standards for fundamentally different factors.

Code of Federal Regulations, 2014 CFR

2014-07-01

... fundamentally different factors. (a) Definition. The term Requester means an Industrial User or a POTW or other... Pretreatment Standards, making them either more or less stringent, as they apply to a certain Industrial User within an industrial category or subcategory. This will only be done if data specific to that Industrial...

Mobilization and Defense Management Technical Reports Series. The Impact of OSHA (Occupational Safety and Health Administration) and EPA (Environmental Protection Agency) on Defense Industry and the Implications for Mobilization.

DTIC Science & Technology

1983-05-01

mat of the voluntary standards thean in existence (JASI and NVA standards, for wcmmle). fwue affected the broad spectrum of Nm rican industry. As OBIA ...have been funded. As OMA matured, programs, standards, and inspections were significantly improved and gained industry aeptance. OBIA has deleted many

An Overview of Skill Standards Systems in Education & Industry. Systems in the U.S. and Abroad. Volume I.

ERIC Educational Resources Information Center

Institute for Educational Leadership, Washington, DC.

This first volume in a four-volume study of industry- and education-driven skill standards in the United States and other countries describes current practice. Chapter I is the executive summary. Chapter II is an overview of historical and current issues that will affect a voluntary network of industry-based skill standards, competencies, and…

Pipeline Optimization Program (PLOP)

DTIC Science & Technology

2006-08-01

the framework of the Dredging Operations Decision Support System (DODSS, https://dodss.wes.army.mil/wiki/0). PLOP compiles industry standards and...efficiency point ( BEP ). In the interest of acceptable wear rate on the pump, industrial standards dictate that the flow Figure 2. Pump class as a function of...percentage of the flow rate corresponding to the BEP . Pump Acceptability Rules. The facts for pump performance, industrial standards and pipeline and

Methodological Issues in Trials of Complementary and Alternative Medicine Interventions

PubMed Central

Sikorskii, Alla; Wyatt, Gwen; Victorson, David; Faulkner, Gwen; Rahbar, Mohammad Hossein

2010-01-01

Background Complementary and alternative medicine (CAM) use is widespread among cancer patients. Information on safety and efficacy of CAM therapies is needed for both patients and health care providers. Well-designed randomized clinical trials (RCTs) of CAM therapy interventions can inform both clinical research and practice. Objectives To review important issues that affect the design of RCTs for CAM interventions. Methods Using the methods component of the Consolidated Standards for Reporting Trials (CONSORT) as a guiding framework, and a National Cancer Institute-funded reflexology study as an exemplar, methodological issues related to participants, intervention, objectives, outcomes, sample size, randomization, blinding, and statistical methods were reviewed. Discussion Trials of CAM interventions designed and implemented according to appropriate methodological standards will facilitate the needed scientific rigor in CAM research. Interventions in CAM can be tested using proposed methodology, and the results of testing will inform nursing practice in providing safe and effective supportive care and improving the well-being of patients. PMID:19918155

Determination of service standard time for liquid waste parameter in certification institution

NASA Astrophysics Data System (ADS)

Sembiring, M. T.; Kusumawaty, D.

2018-02-01

Baristand Industry Medan is a technical implementation unit under the Industrial and Research and Development Agency, the Ministry of Industry. One of the services often used in Baristand Industry Medan is liquid waste testing service. The company set the standard of service 9 working days for testing services. At 2015, 89.66% on testing services liquid waste does not meet the specified standard of services company. The purpose of this research is to specify the standard time of each parameter in testing services liquid waste. The method used is the stopwatch time study. There are 45 test parameters in liquid waste laboratory. The measurement of the time done 4 samples per test parameters using the stopwatch. From the measurement results obtained standard time that the standard Minimum Service test of liquid waste is 13 working days if there is testing E. coli.

77 FR 73968 - Reconsideration of Certain New Source and Startup/Shutdown Issues: National Emission Standards...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-12

... Units and Standards of Performance for Fossil-Fuel-Fired Electric Utility, Industrial-Commercial...- and Oil-fired Electric Utility Steam Generating Units and Standards of Performance for Fossil-Fuel... Units and Standards of Performance for Fossil-Fuel-Fired Electric Utility, Industrial-Commercial...

75 FR 43142 - United States Standards for Grades of Refried Beans

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-23

...] United States Standards for Grades of Refried Beans AGENCY: Agricultural Marketing Service, USDA. ACTION... comments on the possible establishment of voluntary United States Standards for Grades of Refried Beans... industry requested that USDA develop grade standards for canned refried beans to be used by the industry...

Machine Tool Advanced Skills Technology (MAST). Common Ground: Toward a Standards-Based Training System for the U.S. Machine Tool and Metal Related Industries. Volume 7: Industrial Maintenance Technology, of a 15-Volume Set of Skill Standards and Curriculum Training Materials for the Precision Manufacturing Industry.

ERIC Educational Resources Information Center

Texas State Technical Coll., Waco.

This document is intended to help education and training institutions deliver the Machine Tool Advanced Skills Technology (MAST) curriculum to a variety of individuals and organizations. MAST consists of industry-specific skill standards and model curricula for 15 occupational specialty areas within the U.S. machine tool and metals-related…

High consumption of commercial food products among children less than 24 months of age and product promotion in Kathmandu Valley, Nepal

PubMed Central

Huffman, Sandra L.; Adhikary, Indu; Upreti, Senendra Raj; Dhungel, Shrid; Champeny, Mary; Zehner, Elizabeth

2016-01-01

Abstract Commercially produced complementary foods can help improve nutritional status of young children if they are appropriately fortified and of optimal nutrient composition. However, other commercially produced snack food products may be nutritionally detrimental, potentially increasing consumption of foods high in salt or sugar and displacing consumption of other more nutritious options. Helen Keller International, in collaboration with the Nepal government, implemented a study to assess mothers' utilization of commercial food products for child feeding and exposure to commercial promotions for these products. A cross‐sectional survey was conducted among 309 mothers of children less than 24 months of age across 15 health facilities. Utilization of breastmilk substitutes was low, having been consumed by 6.2% of children 0–5 months of age and 7.5% of children 6–23 months of age. Approximately one‐fourth (24.6%) of children 6–23 months age had consumed a commercially produced complementary food in the prior day. Twenty‐eight percent of mothers reported observing a promotion for breastmilk substitutes, and 20.1% reported promotions for commercially produced complementary foods. Consumption of commercially produced snack food products was high at 74.1% of children 6–23 months. Promotions for these same commercially produced snack food products were highly prevalent in Kathmandu Valley, reported by 85.4% of mothers. In order to improve diets during the complementary feeding period, development of national standards for complementary food products is recommended. Nutritious snack options should be promoted for the complementary feeding period; consumption of commercially produced snack food products high in sugar and salt and low in nutrients should be discouraged. PMID:27061954

The role of the Therapeutic Goods Administration and the Medicine and Medical Devices Safety Authority in evaluating complementary and alternative medicines in Australia and New Zealand.

PubMed

Ghosh, Dilip; Skinner, Margot; Ferguson, Lynnette R

2006-04-03

Currently, the regulation of complementary and alternative medicines and related health claims in Australia and New Zealand is managed in a number of ways. Complementary medicines, including herbal, minerals, nutritional/dietary supplements, aromatherapy oils and homeopathic medicines are regulated under therapeutic goods/products legislation. The Therapeutic Goods Administration (TGA), a division of the Commonwealth Department of Health and Ageing is responsible for administering the provisions of the legislation in Australia. The New Zealand Medicines and Medical Devices Safety Authority (Medsafe) administers the provision of legislation in New Zealand. In December 2003 the Australian and New Zealand governments signed a Treaty to establish a single, bi-national agency to regulate therapeutic products, including medical devices prescription, over-the-counter and complementary medicines. A single agency will replace the Australian TGA and the New Zealand Medsafe. The role of the new agency will be to safeguard public health through regulation of the quality, safety and efficacy or performance of therapeutic products in both Australia and New Zealand. The major activities of the new joint Australia New Zealand therapeutic products agency are in product licensing, specifying labelling standards and setting the advertising scheme, together with determining the risk classes of medicines and creating an expanded list of ingredients permitted in Class I medicines. A new, expanded definition of complementary medicines is proposed and this definition is currently under consultation. Related Australian and New Zealand legislation is being developed to implement the joint scheme. Once this legislation is passed, the Treaty will come into force and the new joint regulatory scheme will begin. The agency is expected to commence operation no later than 1 July 2006 and will result in a single agency to regulate complementary and alternative medicines.

High consumption of commercial food products among children less than 24 months of age and product promotion in Kathmandu Valley, Nepal.

PubMed

Pries, Alissa M; Huffman, Sandra L; Adhikary, Indu; Upreti, Senendra Raj; Dhungel, Shrid; Champeny, Mary; Zehner, Elizabeth

2016-04-01

Commercially produced complementary foods can help improve nutritional status of young children if they are appropriately fortified and of optimal nutrient composition. However, other commercially produced snack food products may be nutritionally detrimental, potentially increasing consumption of foods high in salt or sugar and displacing consumption of other more nutritious options. Helen Keller International, in collaboration with the Nepal government, implemented a study to assess mothers' utilization of commercial food products for child feeding and exposure to commercial promotions for these products. A cross-sectional survey was conducted among 309 mothers of children less than 24 months of age across 15 health facilities. Utilization of breastmilk substitutes was low, having been consumed by 6.2% of children 0-5 months of age and 7.5% of children 6-23 months of age. Approximately one-fourth (24.6%) of children 6-23 months age had consumed a commercially produced complementary food in the prior day. Twenty-eight percent of mothers reported observing a promotion for breastmilk substitutes, and 20.1% reported promotions for commercially produced complementary foods. Consumption of commercially produced snack food products was high at 74.1% of children 6-23 months. Promotions for these same commercially produced snack food products were highly prevalent in Kathmandu Valley, reported by 85.4% of mothers. In order to improve diets during the complementary feeding period, development of national standards for complementary food products is recommended. Nutritious snack options should be promoted for the complementary feeding period; consumption of commercially produced snack food products high in sugar and salt and low in nutrients should be discouraged. © 2016 The Authors. Maternal & Child Nutrition published by John Wiley & Sons Ltd.

47 CFR 90.548 - Interoperability Technical Standards.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Standards, approved March 3, 2000, Telecommunications Industry Association, ANSI/TIA/EIA-102.BAEA-2000..., approved March 3, 2000, Telecommunications Industry Association, ANSI/TIA/EIA-102.BAEB-2000; Project 25..., approved March 3, 2000, Telecommunications Industry Association, ANSI/TIA/EIA-102.BAEE-2000; Project 25...

Department of Energy Semiannual Regulatory Agenda

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-20

... Water Heaters; and (2) Energy Efficiency Standards for Certain Commercial and Industrial Electric Motors... Standards for Certain Commercial and Industrial Electric Motors..... 1904-AC28 Energy Efficiency and... FOR CERTAIN COMMERCIAL AND INDUSTRIAL ELECTRIC MOTORS Legal Authority: 42 USC 6313(b)(4)(B) Abstract...

Metrication: An economic wake-up call for US industry

NASA Astrophysics Data System (ADS)

Carver, G. P.

1993-03-01

As the international standard of measurement, the metric system is one key to success in the global marketplace. International standards have become an important factor in international economic competition. Non-metric products are becoming increasingly unacceptable in world markets that favor metric products. Procurement is the primary federal tool for encouraging and helping U.S. industry to convert voluntarily to the metric system. Besides the perceived unwillingness of the customer, certain regulatory language, and certain legal definitions in some states, there are no major impediments to conversion of the remaining non-metric industries to metric usage. Instead, there are good reasons for changing, including an opportunity to rethink many industry standards and to take advantage of size standardization. Also, when the remaining industries adopt the metric system, they will come into conformance with federal agencies engaged in similar activities.

Prevalence and determinants of use of complementary and alternative medicine by hypertensive patients attending primary health care facilities in Kinshasa, Democratic Republic of the Congo: a cross-sectional study.

PubMed

Lulebo, Aimée M; Mapatano, Mala A; Mutombo, Paulin B; Mafuta, Eric M; Samba, Gédéon; Coppieters, Yves

2017-04-08

In the Democratic Republic of the Congo the control of hypertension is poor, characterized by an increasing number of reported cases of hypertension related complications. Poor control of hypertension is associated with non-adherence to antihypertensive medication. It is well established that the use of complementary and alternative medicine is one of the main factors of non-adherence to antihypertensive medication. The aim of this study is to determine the prevalence and factors associated with the use of complementary and alternative medicine. A cross-sectional study was carried out at the Kinshasa Primary Health-care (KPHC) facilities network in November 2014. A structured interview questionnaire was administrated to a total of 280hypertensive patients. Complementary and alternative medicine were defined according to the National Institute of Health classification as a group of diverse medical and healthcare systems, practices, and products that are not presently considered to be part of conventional medicine. Data were summarized using proportion and mean (with standard deviation). The student's t test and χ 2 test were used respectively for mean and proportion comparison. Logistic regression analysis identified determinants of the use of complementary and alternative medicine. The prevalence of use of complementary and alternative medicine was 26.1% (95% CI: 20.7% - 31.8%).Determinants of use of complementary and alternative medicine included misperception about hypertension curability (OR = 2.1; 95%CI: 1.1-3.7) and experience of medication side effects (OR = 2.9; 95%CI: 1.7-5.1). The use of CAM for hypertensive patients is a major problem; antihypertensives with fewer side effects must be emphasized. Religious leaders must become involved in the communication for behavioral change activities to improve the quality of life for hypertensive patients.

[Discussion on research thinking of traditional Chinese medicine standardization system based on whole process quality control].

PubMed

Dong, Ling; Sun, Yu; Pei, Wen-Xuan; Dai, Jun-Dong; Wang, Zi-Yu; Pan, Meng; Chen, Jiang-Peng; Wang, Yun

2017-12-01

The concept of "Quality by design" indicates that good design for the whole life cycle of pharmaceutical production enables the drug to meet the expected quality requirements. Aiming at the existing problems of the traditional Chinese medicine (TCM) industry, the TCM standardization system was put forward in this paper from the national strategic level, under the guidance by the idea of quality control in international manufacturing industry and with considerations of TCM industry's own characteristics and development status. The connotation of this strategy was to establish five interrelated systems: multi-indicators system based on tri-indicators system, quality standard and specification system of TCM herbal materials and decoction pieces, quality traceability system, data monitoring system based on whole-process quality control, and whole-process quality management system of TCM, and achieve the whole process systematic and scientific study in TCM industry through "top-level design-implement in steps-system integration" workflow. This article analyzed the correlation between the quality standards of all links, established standard operating procedures of each link and whole process, and constructed a high standard overall quality management system for TCM industry chains, in order to provide a demonstration for the establishment of TCM whole-process quality control system and provide systematic reference and basis for standardization strategy in TCM industry. Copyright© by the Chinese Pharmaceutical Association.

78 FR 37409 - Small Business Size Standards: Finance and Insurance and Management of Companies and Enterprises

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-20

...The U.S. Small Business Administration (SBA) is increasing small business size standards for 36 industries in North American Industry Classification System (NAICS) Sector 52, Finance and Insurance, and for two industries in NAICS Sector 55, Management of Companies and Enterprises. In addition, SBA is changing the basis for measuring size from assets to annual receipts for one industry in NAICS Sector 52, namely, NAICS 522293, International Trade Financing. Finally, SBA is deleting NAICS 525930, Real Estate Investment Trusts, from its table of size standards. The U.S. Office of Management and Budget (OMB) included the financial activities formerly included in NAICS 525930 in NAICS 531110, NAICS 531120, NAICS 531130, NAICS 531190, and NAICS 525990. As part of its ongoing comprehensive size standards review, SBA evaluated all receipts based and assets based size standards in NAICS Sectors 52 and 55 to determine whether they should be retained or revised. SBA did not review the 1,500-employee size standard for NAICS 524126, Direct Property and Casualty Insurance Carriers, which it will review in the near future with other employee based size standards. This final rule is one of a series of final rules that will review size standards of industries grouped by NAICS Sectors.

Herbal medicine for low back pain.

PubMed

Gagnier, J J; van Tulder, M; Berman, B; Bombardier, C

2006-04-19

Low-back pain is a common condition and a substantial economic burden in industrialized societies. A large proportion of patients with chronic low-back pain use complementary and alternative medicine (CAM), visit CAM practitioners, or both. Several herbal medicines have been purported for use in low-back pain. To determine the effectiveness of herbal medicine for non-specific low-back pain. We searched the following electronic databases: Cochrane Complementary Medicine Field Trials Register (Issue 3, 2005), MEDLINE (1966 to July 2005), EMBASE (1980 to July 2005); checked reference lists in review articles, guidelines and retrieved trials; and personally contacted individuals with expertise in this very specialized area. We included randomized controlled trials, examining adults (over 18 years of age) suffering from acute, sub-acute or chronic non-specific low-back pain. The interventions were herbal medicines, defined as plants that are used for medicinal purposes in any form. Primary outcome measures were pain and function. Two authors (JJG & MVT) conducted the database searches. One author contacted content experts and acquired relevant citations. Full references and abstracts of the identified studies were downloaded. A hard copy was retrieved for final inclusion decisions. Methodological quality and clinical relevance were assessed separately by two individuals. Disagreements were resolved by consensus. Ten trials were included in this review. Two high quality trials examining the effects of Harpagophytum Procumbens (Devil's Claw) found strong evidence that daily doses standardized to 50 mg or 100 mg harpagoside were better than placebo for short-term improvements in pain and rescue medication. Another high quality trial demonstrated relative equivalence to 12.5 mg per day of rofecoxib (Vioxx). Two trials examining the effects of Salix Alba (White Willow Bark) found moderate evidence that daily doses standardized to 120 mg or 240 mg salicin were better than placebo for short-term improvements in pain and rescue medication. An additional trial demonstrated relative equivalence to 12.5 mg per day of rofecoxib. Three low quality trials on Capsicum Frutescens (Cayenne), examining various topical preparations, found moderate evidence that Capsicum Frutescens produced more favourable results than placebo and one trial found equivalence to a homeopathic ointment. Harpagophytum Procumbens, Salix Alba and Capsicum Frutescens seem to reduce pain more than placebo. Additional trials testing these herbal medicines against standard treatments are needed. The quality of reporting in these trials was generally poor. Trialists should refer to the CONSORT statement extension for reporting trials of herbal medicine interventions.

Attitudes of members of the German Society for Palliative Medicine toward complementary and alternative medicine for cancer patients.

PubMed

Conrad, A C; Muenstedt, K; Micke, O; Prott, F J; Muecke, R; Huebner, J

2014-07-01

A high proportion of cancer patients use complementary and alternative medicine (CAM). In oncology, risks of CAM are side effects and interactions. Our aim was to conduct a survey on professionals in palliative care regarding attitudes toward CAM. An internet-based survey with a standardized questionnaire was sent to all members of the German Society for Palliative Care. The questionnaire collected data on attitude toward CAM and experiences. Six hundred and ninety questionnaires (19 %) were returned (49 % physicians, 35 % nurses, 3 % psychologists). Acceptance of CAM is high (92 % for complementary and 54 % for alternative medicine). Most participants had already been asked on CAM by patients (95 %) and relatives (89 %). Forty-four percent already had used complementary methods and 5 % alternative methods. Only 21 % think themselves adequately informed. Seventy-four percent would use complementary methods in a patient with advanced tumor, and 62 % would use alternative therapy in patients if there was no other therapy. Even from those who are skeptical 45 % would treat a patient with alternative methods. In order to inform patients on CAM and to further patients' autonomy, evidence on benefits and harms of CAM must be provided. As awareness of risks from CAM is low and critical appraisal especially of alternative medicine missing, but interest on information on CAM is high, experts should provide evidence-based recommendations for CAM in palliative care to members of different professions. This could be done by a curriculum focusing on the most often used CAM methods.

Determinants of inadequate complementary feeding practices among children aged 6-23 months in Ghana.

PubMed

Issaka, Abukari I; Agho, Kingsley E; Burns, Penelope; Page, Andrew; Dibley, Michael J

2015-03-01

To explore complementary feeding practices and identify potential risk factors associated with inadequate complementary feeding practices in Ghana by using the newly developed WHO infant feeding indicators and data from the nationally representative 2008 Ghana Demographic and Health Survey. The source of data for the analysis was the 2008 Ghana Demographic and Health Survey. Analysis of the factors associated with inadequate complementary feeding, using individual-, household- and community-level determinants, was done by performing multiple logistic regression modelling. Ghana. Children (n 822) aged 6-23 months. The prevalence of the introduction of solid, semi-solid or soft foods among infants aged 6-8 months was 72.6 % (95 % CI 64.6 %, 79.3 %). The proportion of children aged 6-23 months who met the minimum meal frequency and dietary diversity for breast-fed and non-breast-fed children was 46.0 % (95 % CI 42.3 %, 49.9 %) and 51.4 % (95 % CI 47.4 %, 55.3 %) respectively and the prevalence of minimum acceptable diet for breast-fed children was 29.9 % (95 % CI 26.1 %, 34.1 %). Multivariate analysis revealed that children from the other administrative regions were less likely to meet minimum dietary diversity, meal frequency and acceptable diet than those from the Volta region. Household poverty, children whose mothers perceived their size to be smaller than average and children who were delivered at home were significantly less likely to meet the minimum dietary diversity requirement; and children whose mothers did not have any postnatal check-ups were significantly less likely to meet the requirement for minimum acceptable diet. Complementary feeding was significantly lower in infants from illiterate mothers (adjusted OR=3.55; 95 % CI 1.05, 12.02). The prevalence of complementary feeding among children in Ghana is still below the WHO-recommended standard of 90 % coverage. Non-attendance of postnatal check-up by mothers, cultural beliefs and habits, household poverty, home delivery of babies and non-Christian mothers were the most important risk factors for inadequate complementary feeding practices. Therefore, nutrition educational interventions to improve complementary feeding practices should target these factors in order to achieve the fourth Millennium Development Goal.

A Golay complementary TS-based symbol synchronization scheme in variable rate LDPC-coded MB-OFDM UWBoF system

NASA Astrophysics Data System (ADS)

He, Jing; Wen, Xuejie; Chen, Ming; Chen, Lin

2015-09-01

In this paper, a Golay complementary training sequence (TS)-based symbol synchronization scheme is proposed and experimentally demonstrated in multiband orthogonal frequency division multiplexing (MB-OFDM) ultra-wideband over fiber (UWBoF) system with a variable rate low-density parity-check (LDPC) code. Meanwhile, the coding gain and spectral efficiency in the variable rate LDPC-coded MB-OFDM UWBoF system are investigated. By utilizing the non-periodic auto-correlation property of the Golay complementary pair, the start point of LDPC-coded MB-OFDM UWB signal can be estimated accurately. After 100 km standard single-mode fiber (SSMF) transmission, at the bit error rate of 1×10-3, the experimental results show that the short block length 64QAM-LDPC coding provides a coding gain of 4.5 dB, 3.8 dB and 2.9 dB for a code rate of 62.5%, 75% and 87.5%, respectively.

The effects of complementary and alternative medicine on the speech of patients with depression

NASA Astrophysics Data System (ADS)

Fraas, Michael; Solloway, Michele

2004-05-01

It is well documented that patients suffering from depression exhibit articulatory timing deficits and speech that is monotonous and lacking pitch variation. Traditional remediation of depression has left many patients with adverse side effects and ineffective outcomes. Recent studies indicate that many Americans are seeking complementary and alternative forms of medicine to supplement traditional therapy approaches. The current investigation wishes to determine the efficacy of complementary and alternative medicine (CAM) on the remediation of speech deficits associated with depression. Subjects with depression and normal controls will participate in an 8-week treatment session using polarity therapy, a form of CAM. Subjects will be recorded producing a series of spontaneous and narrative speech samples. Acoustic analysis of mean fundamental frequency (F0), variation in F0 (standard deviation of F0), average rate of F0 change, and pause and utterance durations will be conducted. Differences pre- and post-CAM therapy between subjects with depression and normal controls will be discussed.

Industrial Wireless Sensors: A User's Perspective on the Impact of Standards on Wide-spread Deployment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Taft, Cyrus W.; Manges, Wayne W; Sorge, John N

2012-01-01

The role of wireless sensing technologies in industrial instrumentation will undoubtedly become more important in the years ahead. . Deployment of such instrumentation in an industrial setting with its heightened security and robustness criteria hinges on user acceptance of verified performance as well as meeting cost requirements. Today, industrial users face many choices when specifying a wireless sensor network, including radio performance, battery life, interoperability, security, and standards compliance. The potential market for industrial wireless sensors is literally millions of wireless instruments and it is imperative that accurate information for applying the technology to real-world applications be available to themore » end-user so that they can make informed deployment decisions. The majority of industrial wireless automation designs now being deployed or being considered for deployment are based on three different standards . The HART Communications Foundation s WirelessHART (IEC 62591), the International Society of Automation s ISA100.11a, and the offering from the Industrial Wireless Alliance of China known as WIA-PA (IEC 62601). Aside from these industrial automation standards, users must also be cognizant of the underlying wireless network standards IEEE 802.11, IEEE 802.15.4, and IEEE 802.15.3a and their interactions with the three principal industrial automation protocols mentioned previously. The crucial questions being asked by end users revolve around sensor network performance, interoperability, reliability, and security. This paper will discuss potential wireless sensor applications in power plants, barriers to the acceptance of wireless technology, concerns related to standards, and provide an end user prospective on the issues affecting wide-spread deployment of wireless sensors. Finally, the authors conclude with a discussion of a recommended path forward including how standards organizations can better facilitate end user decision making and how end users can locate and use objective information for decision making.« less

Future Concepts for Realtime Data Interfaces for Control Centers

NASA Technical Reports Server (NTRS)

Kearney, Mike W., III

2004-01-01

Existing methods of exchanging realtime data between the major control centers in the International Space Station program have resulted in a patchwork of local formats being imposed on each Mission Control Center. This puts the burden on a data customer to comply with the proprietary data formats of each data supplier. This has increased the cost and complexity for each participant, limited access to mission data and hampered the development of efficient and flexible operations concepts. Ideally, a universal format should be promoted in the industry to prevent the unnecessary burden of each center processing a different data format standard for every external interface with another center. With the broad acceptance of XML and other conventions used in other industries, it is now time for the Aerospace industry to fully engage and establish such a standard. This paper will briefly consider the components that would be required by such a standard (XML schema, data dictionaries, etc.) in order to accomplish the goal of a universal low-cost interface, and acquire broad industry acceptance. We will then examine current approaches being developed by standards bodies and other groups. The current state of CCSDS panel work will be reviewed, with a survey of the degree of industry acceptance. Other widely accepted commercial approaches will be considered, sometimes complimentary to the standards work, but sometimes not. The question is whether de facto industry standards are in concert with, or in conflict with the direction of the standards bodies. And given that state of affairs, the author will consider whether a new program establishing its Mission Control Center should implement a data interface based on those standards. The author proposes that broad industry support to unify the various efforts will enable collaboration between control centers and space programs to a wider degree than is currently available. This will reduce the cost for programs to provide realtime access to their data, hence reducing the cost of access to space, and benefiting the industry as a whole.

C-MOS array design techniques

NASA Technical Reports Server (NTRS)

Feller, A.

1978-01-01

The entire complement of standard cells and components, except for the set-reset flip-flop, was completed. Two levels of checking were performed on each device. Logic cells and topological layout are described. All the related computer programs were coded and one level of debugging was completed. The logic for the test chip was modified and updated. This test chip served as the first test vehicle to exercise the standard cell complementary MOS(C-MOS) automatic artwork generation capability.

STANDARD REFERENCE MATERIALS FOR THE POLYMERS INDUSTRY.

PubMed

McDonough, Walter G; Orski, Sara V; Guttman, Charles M; Migler, Kalman D; Beers, Kathryn L

2016-01-01

The National Institute of Standards and Technology (NIST) provides science, industry, and government with a central source of well-characterized materials certified for chemical composition or for some chemical or physical property. These materials are designated Standard Reference Materials ® (SRMs) and are used to calibrate measuring instruments, to evaluate methods and systems, or to produce scientific data that can be referred readily to a common base. In this paper, we discuss the history of polymer based SRMs, their current status, and challenges and opportunities to develop new standards to address industrial measurement challenges.

Making Sense of Industry-Based Skill Standards.

ERIC Educational Resources Information Center

Bailey, Thomas; Merritt, Donna

The objectives and development of the skill standards movement were examined along with 22 pilot projects that were undertaken as part of an effort to promote the development of a national system of voluntary industry-based skill standards. First, the past and present of the skill standards movement and certification practices were analyzed along…

77 FR 46371 - National Emission Standards for Hazardous Air Pollutants for the Portland Cement Manufacturing...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-03

...-AQ93 National Emission Standards for Hazardous Air Pollutants for the Portland Cement Manufacturing... Portland Cement Manufacturing Industry and Standards of Performance for Portland Cement Plants,'' which was... Manufacturing Industry and Standards of Performance for Portland Cement Plants'' under Docket ID No. EPA-HQ-OAR...

Research on the technical requirements standards of high efficiency precipitator in power industries for assessment

NASA Astrophysics Data System (ADS)

Jin, Huang; Ling, Lin; Jun, Guo; Jianguo, Li; Yongzhong, Wang

2017-11-01

Facing the increasingly severe situation of air pollution, China are now positively promoting the evaluation of high efficiency air pollution control equipments and the research of the relative national standards. This paper showed the significance and the effect of formulating the technical requirements of high efficiency precipitator equipments for assessment national standards in power industries as well as the research thoughts and principle of these standards. It introduce the qualitative and quantitative evaluation requirements of high efficiency precipitators using in power industries and the core technical content such as testing, calculating, evaluation methods and so on. The implementation of a series of national standards is in order to lead and promote the production and application of high efficiency precipitator equipments in the field of the prevention of air pollution in national power industries.

Current status and future prospects of research and development operations in traditional and complementary and alternative medicine manufacturing small- and medium-sized enterprises: a 2014 company-based survey.

PubMed

Ahn, Miyoung; Park, Eun-Ji; Woo, Jong-Min

2017-12-01

Small- and medium-sized enterprises (SMEs) have played key roles in the economic growth and technical innovation of traditional and complementary and alternative medicine (T&CM). Research and development (R&D) are critical activities for industrial progress. This study aimed to characterize the current status of SME R&D activities and to explore manufacturers' perceptions of R&D expansion. Records of the distribution of T&CM SMEs and R&D resources detailed in the 2014 Statistics of Korea T&CM Industries survey, a previously conducted survey on the industrial status of the T&CM field, were reviewed. Data on the perceptions of R&D activities were investigated through a company-based survey covering 285 T&CM-manufacturing SMEs. Greater than 99% of the 13,636 T&CM manufacturers at the time of the study were SMEs employing less than 50 workers. Natural cosmetics manufacturing SMEs (NC SMEs) had the highest R&D expenditures. NC SMEs rely heavily on internal R&D operations, which may contribute to their strong need for R&D collaboration with public research institutions and expanded T&CM-promoted R&D programs. "Digestive system disorders" are the main target diseases for current herbal and dietary supplement manufacturing SMEs and herbal medicine manufacturing SMEs. These SMEs tend to view their own product-related business as a priority for future R&D investment. This study represents the first attempt to assess SME perceptions of R&D activities. The findings herein can inform the design of sustainable programs that support R&D by reducing the gaps between the perspectives of T&CM product makers and policymakers.

77 FR 55482 - Public Workshop on Marine Technology and Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-10

... provide a unique opportunity for classification societies, industry groups, standards development... email at [email protected] . You may also contact Lieutenant Commander Ken Hettler, Office of Design and... provides a unique opportunity for classification societies, industry groups, standards development...

49 CFR 214.113 - Head protection.

Code of Federal Regulations, 2014 CFR

2014-10-01

..., DEPARTMENT OF TRANSPORTATION RAILROAD WORKPLACE SAFETY Bridge Worker Safety Standards § 214.113 Head... conform to the national consensus standards for industrial head protection (American National Standards Institute, Z89.1-1986, Protective Headwear for Industrial Workers). This incorporation by reference was...

49 CFR 214.113 - Head protection.

Code of Federal Regulations, 2013 CFR

2013-10-01

..., DEPARTMENT OF TRANSPORTATION RAILROAD WORKPLACE SAFETY Bridge Worker Safety Standards § 214.113 Head... conform to the national consensus standards for industrial head protection (American National Standards Institute, Z89.1-1986, Protective Headwear for Industrial Workers). This incorporation by reference was...

49 CFR 214.113 - Head protection.

Code of Federal Regulations, 2012 CFR

2012-10-01

..., DEPARTMENT OF TRANSPORTATION RAILROAD WORKPLACE SAFETY Bridge Worker Safety Standards § 214.113 Head... conform to the national consensus standards for industrial head protection (American National Standards Institute, Z89.1-1986, Protective Headwear for Industrial Workers). This incorporation by reference was...

49 CFR 214.113 - Head protection.

Code of Federal Regulations, 2011 CFR

2011-10-01

..., DEPARTMENT OF TRANSPORTATION RAILROAD WORKPLACE SAFETY Bridge Worker Safety Standards § 214.113 Head... conform to the national consensus standards for industrial head protection (American National Standards Institute, Z89.1-1986, Protective Headwear for Industrial Workers). This incorporation by reference was...

76 FR 3517 - Standards of Performance for Fossil-Fuel-Fired, Electric Utility, Industrial-Commercial...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-20

... Standards of Performance for Fossil-Fuel-Fired, Electric Utility, Industrial-Commercial-Institutional, and... following: Category NAICS \\1\\ Examples of regulated entities Industry 221112 Fossil fuel-fired electric utility steam generating units. Federal Government 22112 Fossil fuel-fired electric utility steam...

Post-test analysis of lithium-ion battery materials at Argonne National Laboratory

NASA Astrophysics Data System (ADS)

Bareno, Javier; Dietz-Rago, Nancy; Bloom, Ira

2014-03-01

Electrochemical performance is often limited by surface and interfacial reactions at the electrodes. However, routine handling of samples can alter the very surfaces that are the object of study. Our approach combines standardized testing of batteries with sample harvesting under inert atmosphere conditions. Cells of different formats are disassembled inside an Argon glove box with controlled water and oxygen concentrations below 2 ppm. Cell components are characterized in situ, guaranteeing that observed changes in physicochemical state are due to electrochemical operation, rather than sample manipulation. We employ a complementary set of spectroscopic, microscopic, electrochemical and metallographic characterization to obtain a complete picture of cell degradation mechanisms. The resulting information about observed degradation mechanisms is provided to materials developers, both academic and industrial, to suggest new strategies and speed up the Research & Development cycle of Li-ion and related technologies. This talk will describe Argonne's post-test analysis laboratory, with an emphasis on capabilities and opportunities for collaboration. Cell disassembly, sample harvesting procedures and recent results will be discussed. This work was performed under the auspices of the U.S. Department of Energy, Office of Vehicle Technologies, Hybrid and Electric Systems, under Contract No. DE-AC02-06CH11357.

Progress in ion torrent semiconductor chip based sequencing.

PubMed

Merriman, Barry; Rothberg, Jonathan M

2012-12-01

In order for next-generation sequencing to become widely used as a diagnostic in the healthcare industry, sequencing instrumentation will need to be mass produced with a high degree of quality and economy. One way to achieve this is to recast DNA sequencing in a format that fully leverages the manufacturing base created for computer chips, complementary metal-oxide semiconductor chip fabrication, which is the current pinnacle of large scale, high quality, low-cost manufacturing of high technology. To achieve this, ideally the entire sensory apparatus of the sequencer would be embodied in a standard semiconductor chip, manufactured in the same fab facilities used for logic and memory chips. Recently, such a sequencing chip, and the associated sequencing platform, has been developed and commercialized by Ion Torrent, a division of Life Technologies, Inc. Here we provide an overview of this semiconductor chip based sequencing technology, and summarize the progress made since its commercial introduction. We described in detail the progress in chip scaling, sequencing throughput, read length, and accuracy. We also summarize the enhancements in the associated platform, including sample preparation, data processing, and engagement of the broader development community through open source and crowdsourcing initiatives. © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Integrative medicine in hematology/oncology: benefits, ethical considerations, and controversies.

PubMed

Rosenthal, David S; Dean-Clower, Elizabeth

2005-01-01

Integrative Medicine (IM), a newly emerging field, has evolved from Complementary and Alternative Medicine (CAM). CAM refers to diverse medical and health care systems, practices, and products that are not presently considered part of conventional medicine and generally have limited scientific evidence. In the US, CAM is a multi-billion dollar, unregulated industry with potential benefits and risks to consumers, including cancer patients, who are high utilizers of complementary therapies. Patients' CAM use often is unsupervised by physicians, yet patients need the advice and guidance of their hematologists/oncologists as part of total cancer care. Ethical and legal issues physicians need to address include inquiring about and educating patients regarding potential interactions (e.g., drug-herb, radiation-antioxidant) or product contaminants, while discussing other therapies that may alleviate symptoms and/or improve quality of life. Administratively, CAM offerings in medical settings require relevant policies and procedures, such as properly credentialing practitioners and providing financial assistance counseling for those who cannot afford fee-for-service. Unlike "Alternative Medicine," the goal of IM is to combine mainstream medical therapies and CAM therapies (e.g., acupuncture, meditation, music therapy) that have some high-quality scientific evidence of safety and effectiveness. The Society for Integrative Oncology (SIO), a new international organization of oncology professionals studying and integrating effective complementary therapies in cancer care, serves as a forum for presenting scientific data on these therapies while emphasizing the importance of developing infrastructure that promotes IM principles and practices. The ultimate goal is to develop multidisciplinary expertise and therapeutic synergy between conventional and complementary therapies.

Laser line scan underwater imaging by complementary metal-oxide-semiconductor camera

NASA Astrophysics Data System (ADS)

He, Zhiyi; Luo, Meixing; Song, Xiyu; Wang, Dundong; He, Ning

2017-12-01

This work employs the complementary metal-oxide-semiconductor (CMOS) camera to acquire images in a scanning manner for laser line scan (LLS) underwater imaging to alleviate backscatter impact of seawater. Two operating features of the CMOS camera, namely the region of interest (ROI) and rolling shutter, can be utilized to perform image scan without the difficulty of translating the receiver above the target as the traditional LLS imaging systems have. By the dynamically reconfigurable ROI of an industrial CMOS camera, we evenly divided the image into five subareas along the pixel rows and then scanned them by changing the ROI region automatically under the synchronous illumination by the fun beams of the lasers. Another scanning method was explored by the rolling shutter operation of the CMOS camera. The fun beam lasers were turned on/off to illuminate the narrow zones on the target in a good correspondence to the exposure lines during the rolling procedure of the camera's electronic shutter. The frame synchronization between the image scan and the laser beam sweep may be achieved by either the strobe lighting output pulse or the external triggering pulse of the industrial camera. Comparison between the scanning and nonscanning images shows that contrast of the underwater image can be improved by our LLS imaging techniques, with higher stability and feasibility than the mechanically controlled scanning method.

Mineral content of complementary foods.

PubMed

Jani, Rati; Udipi, S A; Ghugre, P S

2009-01-01

To document mineral contents iron, zinc, calcium, energy contents and nutrient densities in complementary foods commonly given to young urban slum children. Information on dietary intake was collected from 892 mothers of children aged 13-24 months, using 24 hour dietary recall and standardized measures. Three variations of 27 most commonly prepared recipes were analyzed and their energy (Kcal/g) and nutrient densities (mg/100 Kcal) were calculated. Considerable variations were observed in preparation of all items fed to the children. Cereal-based items predominated their diets with only small amount of vegetables/fruits. Fenugreek was the only leafy vegetable included, but was given to only 1-2% of children. Iron, calcium, zinc contents of staple complementary foods ranged from: 0.33 mg to 3.73 mg, 4 mg to 64 mg, and 0.35 mg to 2.99 mg/100 respectively. Recipes diluted with less water and containing vegetables, spices had higher mineral content. Minerals densities were higher for dals, fenugreek vegetable, khichdi and chapatti. Using the median amounts of the various recipes fed to children, intakes of all nutrients examined especially calcium and iron was low. There is an urgent need to educate mothers about consistency, dilution, quantity, frequency, method of preparation, inclusion of micronutrient-rich foods, energy-dense complementary foods and gender equality.

Sensitive detection of multiple pathogens using a single DNA probe.

PubMed

Nordin, Noordiana; Yusof, Nor Azah; Abdullah, Jaafar; Radu, Son; Hushiarian, Roozbeh

2016-12-15

A simple but promising electrochemical DNA nanosensor was designed, constructed and applied to differentiate a few food-borne pathogens. The DNA probe was initially designed to have a complementary region in Vibrio parahaemolyticus (VP) genome and to make different hybridization patterns with other selected pathogens. The sensor was based on a screen printed carbon electrode (SPCE) modified with polylactide-stabilized gold nanoparticles (PLA-AuNPs) and methylene blue (MB) was employed as the redox indicator binding better to single-stranded DNA. The immobilization and hybridization events were assessed using differential pulse voltammetry (DPV). The fabricated biosensor was able to specifically distinguish complementary, non-complementary and mismatched oligonucleotides. DNA was measured in the range of 2.0×10(-9)-2.0×10(-13)M with a detection limit of 5.3×10(-12)M. The relative standard deviation for 6 replications of DPV measurement of 0.2µM complementary DNA was 4.88%. The fabricated DNA biosensor was considered stable and portable as indicated by a recovery of more than 80% after a storage period of 6 months at 4-45°C. Cross-reactivity studies against various food-borne pathogens showed a reliably sensitive detection of VP. Copyright © 2016 Elsevier B.V. All rights reserved.

Micronutrient Deficiency Control in Vietnam from Policy and Research to Implementation: Keys for Success, Challenges and Lessons Learned.

PubMed

Tran, Van Khanh; Spohrer, Rebecca; LE, Tuyen Danh; Poonawala, Alia; Monech-Pfanner, Regina

2015-01-01

Micronutrient deficiencies are still a public health problem in Vietnam. The Government of Vietnam has taken several steps to improve the situation through issuing supportive policy documents over the last several decades. Food fortification is an important complementary strategy to help bridge the nutrient gap in the population. Currently technical regulations are in place and food fortification is taking place on a voluntary basis, along with other complementary targeted programs including home fortification of complementary foods with micronutrient powders and a communications campaign to reach adolescent girls. These have been built on innotative partnerships with industries on a voluntary, market basis. Other innovative targeted nutrition programs are also being piloted, including a micronutrient supplement project in four provinces and a campain to reach adolescent girls through sports. High level political commitment and resources is a crucial element to scale up in Vietnam. A micronutrient survey planned in 2015 will help provide the evidence to support a possible mandatory decree on food fortification. Vietnam has built a solid foundation in order to scale up its national food fortification program in the future to reach the majority of the population with improved intakes of iron, vitamin A, zinc, and iodine.

Anti-complementary activity of enzyme-treated traditional Korean rice wine (Makgeolli) hydrolysates.

PubMed

Bae, Song Hwan; Choi, Jang Won; Ra, Kyung Soo; Yu, Kwang-Won; Shin, Kwang-Soon; Park, Sung Sun; Suh, Hyung Joo

2012-06-01

Makgeolli brewed from rice contains about 150 g kg(-1) alcohol and has a fragrance as well as an acidic and sweet taste. During the brewing process, by-products such as rice bran and brewery cake are produced. At the end of fermentation the matured mash is transferred to a filter cloth and the Makgeolli is squeezed out from the cake, leaving the lees of the mash. These by-products have continued to increase every year, resulting in an ecological problem. It is therefore important to develop new uses for them. The objective of this study was to use the by-products from the brewing of Makgeolli as a valuable functional food or nutraceutical. The anti-complementary activities of crude polysaccharides isolated from Cytolase hydrolysates of Makgeolli lees at concentrations of 1000 and 500 µg mL(-1) were 84.15 and 78.70% respectively. The activity of polysaccharide krestin (PSK) was 60.00% at 1000 µg mL(-1). The active polysaccharide obtained with Cytolase comprised mainly glucose and mannose (molar ratio 1.00:0.62). Glucose- and mannose-rich crude polysaccharides were isolated from the Cytolase hydrolysate of Makgeolli lees. The polysaccharides retain anti-complementary activity to enhance the immune system as a functional food or nutraceutical. Copyright © 2011 Society of Chemical Industry.

Data fusion in X-ray computed tomography using a superiorization approach.

PubMed

Schrapp, Michael J; Herman, Gabor T

2014-05-01

X-ray computed tomography (CT) is an important and widespread inspection technique in industrial non-destructive testing. However, large-sized and heavily absorbing objects cause artifacts due to either the lack of penetration of the specimen in specific directions or by having data from only a limited angular range of views. In such cases, valuable information about the specimen is not revealed by the CT measurements alone. Further imaging modalities, such as optical scanning and ultrasonic testing, are able to provide data (such as an edge map) that are complementary to the CT acquisition. In this paper, a superiorization approach (a newly developed method for constrained optimization) is used to incorporate the complementary data into the CT reconstruction; this allows precise localization of edges that are not resolvable from the CT data by itself. Superiorization, as presented in this paper, exploits the fact that the simultaneous algebraic reconstruction technique (SART), often used for CT reconstruction, is resilient to perturbations; i.e., it can be modified to produce an output that is as consistent with the CT measurements as the output of unmodified SART, but is more consistent with the complementary data. The application of this superiorized SART method to measured data of a turbine blade demonstrates a clear improvement in the quality of the reconstructed image.

Development and implementation of energy efficiency standards and labeling programs in China: Progress and challenges

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhou, Nan; Khanna, Nina Zheng; Fridley, David

Over the last twenty years, with growing policy emphasis on improving energy efficiency and reducing environmental pollution and carbon emissions, China has implemented a series of new minimum energy performance standards (MEPS) and mandatory and voluntary energy labels to improve appliance energy efficiency. As China begins planning for the next phase of standards and labeling (S&L) program development under the 12th Five Year Plan, an evaluation of recent program developments and future directions is needed to identify gaps that still exist when compared with international best practices. The review of China’s S&L program development and implementation in comparison with majormore » findings from international experiences reveal that there are still areas of improvement, particularly when compared to success factors observed across leading international S&L program. China currently lacks a formalized regulatory process for standard-setting and do not have any legal or regulatory guidance on elements of S&L development such as stakeholder participation or the issue of legal precedence between conflicting national, industrial and local standards. Consequently, China’s laws regarding standard-setting and management of the mandatory energy label program could be updated, as they have not been amended or revised recently and no longer reflects the current situation. While China uses similar principles for choosing target products as the U.S., Australia, EU and Japan, including high energy-consumption, mature industry and testing procedure and stakeholder support, recent MEPS revisions have generally aimed at only eliminating the bottom 20% efficiency of the market. Setting a firm principle based on maximizing energy savings that are technically feasible and economically justified may help improve the stringency of China’s MEPS program and reduce the need for frequent revisions. China also lacks robust survey data and relies primarily on market research data in relatively simple techno-economic analyses used to determine its efficiency standards levels rather than the specific sets of analyses and tools used internationally. Based on international experiences, inclusion of more detailed energy consumption surveys in the Chinese national census surveys and statistical reporting systems could help provide the necessary data for more comprehensive standard-setting analyses. In terms of stakeholder participation in the standards development process, stakeholder participation in China is limited to membership on technical committees responsible for developing or revising standards and generally do not include environmental groups, consumer associations, utilities and other NGOs. Increasing stakeholder involvement to broader interest groups could help garner more support and feedback in the S&L implementation process. China has emerged as a leader in a national verification testing scheme with complementary pilot checktesting projects, but it still faces challenges with insufficient funding, low local awareness amongst some regulatory agencies and resistance to check-testing by some manufacturers, limited product sampling scope, and testing inconsistency and incomparability of results. Thus, further financial and staff resources and capacity building will be needed to overcome these remaining challenges and to expand impacts evaluations to assess the actual effectiveness of implementation and enforcement.« less

Design Of Measurements For Evaluating Readiness Of Technoware Components To Meet The Required Standard Of Products

NASA Astrophysics Data System (ADS)

Fauzi, Ilham; Muharram Hasby, Fariz; Irianto, Dradjad

2018-03-01

Although government is able to make mandatory standards that must be obeyed by the industry, the respective industries themselves often have difficulties to fulfil the requirements described in those standards. This is especially true in many small and medium sized enterprises that lack the required capital to invest in standard-compliant equipment and machineries. This study aims to develop a set of measurement tools for evaluating the level of readiness of production technology with respect to the requirements of a product standard based on the quality function deployment (QFD) method. By combining the QFD methodology, UNESCAP Technometric model [9] and Analytic Hierarchy Process (AHP), this model is used to measure a firm’s capability to fulfill government standard in the toy making industry. Expert opinions from both the governmental officers responsible for setting and implementing standards and the industry practitioners responsible for managing manufacturing processes are collected and processed to find out the technological capabilities that should be improved by the firm to fulfill the existing standard. This study showed that the proposed model can be used successfully to measure the gap between the requirements of the standard and the readiness of technoware technological component in a particular firm.

[Investigation report on the technical standards of TCM diagnosis, treatment and rehabilitation equipment].

PubMed

Shen, Hua; Liu, Tangyi; Yang, Huayuan

2016-02-01

The questionnaire was adopted so as to investigate the attitudes and recognition of the manufacture eneprises of TCM diagnosis, treatment and rehabilitation equipment (DTRE) to the technical standards of, relevant products. It was found that the construction of the industrial standard and the national standard was lagged behind on TCM DTRE. Under the new situation, the enterprises are highly willing to participate in the development of the industrial, national and international standards and have a certain of understanding on the standard development. Nearly 80 % of enterprises believed that it was necessary to set up the relevant mirror organization for the development of industrial, national and international standard of TCM DITRE. In the future, the standard construction of TCM DTRE must face to the new situation. The constant increasing of the enterprises. and scientific research organizations in the standard construction must promote the development of TCM DTRE.

Food fortification as a complementary strategy for the elimination of micronutrient deficiencies: case studies of large scale food fortification in two Indian States.

PubMed

Bhagwat, Sadhana; Gulati, Deepti; Sachdeva, Ruchika; Sankar, Rajan

2014-01-01

The burden of micronutrient malnutrition is very high in India. Food fortification is one of the most cost-effective and sustainable strategies to deliver micronutrients to large population groups. Global Alliance for Improved Nutrition (GAIN) is supporting large-scale, voluntary, staple food fortification in Rajasthan and Madhya Pradesh because of the high burden of malnutrition, availability of industries capable of and willing to introduce fortified staples, consumption patterns of target foods and a conducive and enabling environment. High extraction wheat flour from roller flour mills, edible soybean oil and milk from dairy cooperatives were chosen as the vehicles for fortification. Micronutrients and levels of fortification were selected based on vehicle characteristics and consumption levels. Industry recruitment was done after a careful assessment of capability and willingness. Production units were equipped with necessary equipment for fortification. Staffs were trained in fortification and quality control. Social marketing and communication activities were carried out as per the strategy developed. A state food fortification alliance was formed in Madhya Pradesh with all relevant stakeholders. Over 260,000 MT of edible oil, 300,000 MT of wheat flour and 500,000 MT of milk are being fortified annually and marketed. Rajasthan is also distributing 840,000 MT of fortified wheat flour annually through its Public Distribution System and 1.1 million fortified Mid-day meals daily through the centralised kitchens. Concurrent monitoring in Rajasthan and Madhya has demonstrated high compliance with all quality standards in fortified foods.

77 FR 56741 - Federal Acquisition Regulation; NAICS and Size Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-13

....102(a)(1)). * * * * * 0 4. Amend section 19.303 by adding a new sentence at the end of paragraph (a... Regulation (FAR) to clarify that new North American Industry Classification System (NAICS) codes are not... corresponding industry size standards. Other corresponding changes were also made. Published industry size...

Novel studies of non-aqueous volatiles in lint Cotton moisture tests by complementary thermal methods

USDA-ARS?s Scientific Manuscript database

Moisture affects economical and rheological properties of cotton, making its accurate determination important. A significant difference in moisture contents between the current and most cited standard oven drying ASTM method (ASTM D 2495, SOD) and volumetric Karl Fischer Titration (KFT) has been est...

Height as a Basis for Interpersonal Attraction.

ERIC Educational Resources Information Center

Hensley, Wayne E.

1994-01-01

Findings from 594 college students indicated that, although complementary standard may be used in hypothetical date selection, actual height of chosen person was more likely to be made on step function. Found no dating consequences for female in height-related sense; taller males enjoyed dating advantage, although advantage seemed to diminish when…

Best Available Evidence: Three Complementary Approaches

ERIC Educational Resources Information Center

Slocum, Timothy A.; Spencer, Trina D.; Detrich, Ronnie

2012-01-01

The best available evidence is one of the three critical features of evidence-based practice. Best available evidence is often considered to be synonymous with extremely high standards for research methodology. However, this notion may limit the scope and impact of evidence based practice to those educational decisions on which high quality…

Optoacoustic sensing of ocular bacterial antigen using targeted gold nanorods

NASA Astrophysics Data System (ADS)

Maswadi, Saher; Page, Leland; Woodward, Lee; Glickman, Randolph D.; Barsalou, Norman

2008-02-01

Bacterial contamination can be detected using a minimally invasive optical method, based on laser-induced optoacoustic spectroscopy, to probe for specific antigens associated with a specific infectious agent. As a model system, we have used a surface antigen (Ag), isolated from Chlamydia trachomatis, and a complementary antibody (Ab). A preparation of 0.2 mg/ml of monoclonal Ab specific to the C. trachomatis surface Ag was conjugated to gold nanorods using standard commercial reagents, in order to produce a targeted contrast agent with a strong optoacoustic signal. The C. trachomatis Ag was absorbed in standard plastic microwells, and the binding of the complementary Ab-nanorod conjugate was tested in an immunoaffinity assay. Optoacoustic signals were elicited from the bound nanorods, using an optical parametric oscillator (OPO) laser system as the optical pump. The wavelength tuneability of the OPO optimized the spectroscopic measurement by exciting the nanorods at their optical absorption maxima. Optoacoustic responses were measured in the microwells using a probe beam deflection technique. Immunoaffinity assays were performed on several dilutions of purified C. trachomatis antigen ranging from 50 μg/ml to 1 pg/ml, in order to determine the detection limit for the optoacoustic-based assay. Only when the antigen was present, and the complementary Ab-NR reagent was introduced into the microwell, was an enhanced optoacoustic signal obtained, which indicated specific binding of the Ab-NR complex. The limit of detection with the current system design is between 1 and 5 pg/ml of bacterial Ag.

How the new optoelectronic design automation industry is taking advantage of preexisting EDA standards

NASA Astrophysics Data System (ADS)

Nesmith, Kevin A.; Carver, Susan

2014-05-01

With the advancements in design processes down to the sub 7nm levels, the Electronic Design Automation industry appears to be coming to an end of advancements, as the size of the silicon atom becomes the limiting factor. Or is it? The commercial viability of mass-producing silicon photonics is bringing about the Optoelectronic Design Automation (OEDA) industry. With the science of photonics in its infancy, adding these circuits to ever-increasing complex electronic designs, will allow for new generations of advancements. Learning from the past 50 years of the EDA industry's mistakes and missed opportunities, the photonics industry is starting with electronic standards and extending them to become photonically aware. Adapting the use of pre-existing standards into this relatively new industry will allow for easier integration into the present infrastructure and faster time to market.

13 CFR 121.101 - What are SBA size standards?

Code of Federal Regulations, 2011 CFR

2011-01-01

... SBA size standards? (a) SBA's size standards define whether a business entity is small and, thus... Industry Classification System (NAICS). (b) NAICS is described in the North American Industry Classification Manual-United States, which is available from the National Technical Information Service, 5285...

13 CFR 121.101 - What are SBA size standards?

Code of Federal Regulations, 2010 CFR

2010-01-01

... SBA size standards? (a) SBA's size standards define whether a business entity is small and, thus... Industry Classification System (NAICS). (b) NAICS is described in the North American Industry Classification Manual-United States, which is available from the National Technical Information Service, 5285...

29 CFR 1917.93 - Head protection.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED..., “American National Standard for Industrial Head Protection,” incorporated by reference in § 1917.3; (ii) American National Standards Institute (ANSI) Z89.1-2003, “American National Standard for Industrial Head...

29 CFR 1917.93 - Head protection.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED..., “American National Standard for Industrial Head Protection,” incorporated by reference in § 1917.3; (ii) American National Standards Institute (ANSI) Z89.1-2003, “American National Standard for Industrial Head...

Thriving public-private partnership to fortify cooking oil in the West African Economic and Monetary Union (UEMOA) to control vitamin A deficiency: Faire Tache d'Huile en Afrique de l'Ouest.

PubMed

Sablah, Mawuli; Klopp, Jennifer; Steinberg, Douglas; Touaoro, Zaoro; Laillou, Arnaud; Baker, Shawn

2012-12-01

In sub-Saharan Africa, more than 42% of children are at risk for vitamin A deficiency, and control of vitamin A deficiency will prevent more than 600,000 child deaths annually. In the West African Economic and Monetary Union (UEMOA), an estimated 54.3% of preschool-age children are vitamin A deficient and 13% of pregnant women have night blindness. To project the achievements of this West African coalition. This article documents the achievements, challenges, and lessons learned associated with the development of a public-private partnership to fortify vegetable oil in West Africa through project reports and industry assessments. National-level food consumption surveys identified cooking oil as a key vehicle for vitamin A. Stakeholders therefore advocated for the production of fortified vegetable oil at large scale, supported industrial assessments, and reinforced the capacity of cooking oil industries to implement vitamin A fortification through effective coordination of public and private partnerships tied with standards, regulations, and social marketing. Strong alliances for food fortification were established at the regional and national levels. Stakeholders also developed policies, adopted directives, built capacity, implemented social marketing, and monitored quality enforcement systems to sustain fortification for maximum public health impact. The synergy created resulted from the unique and complementary core competencies of all the partners under effective coordination. The initiative began with the 8 UEMOA member countries and now includes all 15 countries of the Economic Community of West African States (ECOWAS), plus Cameroon, Tanzania, and Mozambique, forming a sub-Saharan Africa-wide initiative on food fortification. All members of the Professional Association of Cooking Oil Industries of the West African Economic and Monetary Union (AIFO-UEMOA) now fortify edible oil with vitamin A. Through multisector cooperation, an estimated 70% of the population has access to vitamin A-fortified edible oil in participating countries. Sustainable fortification of cooking oil is now a reality in all UEMOA countries.

Environmental management practices in the Lebanese pharmaceutical industries: implementation strategies and challenges.

PubMed

Massoud, May A; Makarem, N; Ramadan, W; Nakkash, R

2015-03-01

This research attempts to provide an understanding of the Lebanese pharmaceutical industries' environmental management strategies, priorities, and perceptions as well as drivers, barriers, and incentives regarding the implementation of the voluntary ISO 14001 Environmental Management System. Accordingly, a semistructured in-depth interview was conducted with the pharmaceutical industries. The findings revealed a significant lack of knowledge about the standard among the industries. The main perceived drivers for adopting the ISO 14001 are improving the companies' image and overcoming international trade. The main perceived barriers for acquiring the standard are the lack of government support and the fact that ISO 14001 is not being legally required or enforced by the government. Moreover, results revealed that adopting the ISO 14001 standard is not perceived as a priority for the Lebanese pharmaceutical industries. Although the cost of certification was not considered as a barrier for the implementation of ISO 14001, the majority of the pharmaceutical industries are neither interested nor willing to adopt the Standard if they are not exposed to any regulatory pressure or external demand. They are more concerned with quality and safety issues with the most adopted international standard among the industries being the ISO 9001 quality management system. This study highlights the aspect that financial barriers are not always the hurdles for implementing environmental management strategies in developing countries and underscores the need for regulatory frameworks and enforcement.

The development and regulation of occupational exposure limits in Singapore.

PubMed

Tang, Tan Kia; Siang, Lee Hock; Koh, David

2006-11-01

Singapore is an island republic in South East Asia with a workforce of about 2.1 million including 0.7 million employed in the manufacturing industry. Singapore's industry is diversified and the main growth sectors include microelectronics, chemical, petrochemical, pharmaceutical, and biomedical sectors. Exposure to chemical hazards is one of the main occupational health problems in the manufacturing sectors. The main roles of government in the protection of workers against safety and health hazards are to set standards and provide a proper infrastructure for industry to self-regulate. The occupation safety and health laws must provide adequate protection of workforce but must not disadvantage local industry in this globally competitive economy. To ensure a level playing field, Singapore's occupational exposure standards are benchmarked against those established in the developed countries. These standards are reviewed regularly to ensure they are realistic and relevant in tandem with worldwide trends. Industry and stakeholders are consulted before any new standards are introduced. In enforcing the laws relating to exposure standards, legal and administrative procedures are followed to ensure fairness and to prevent abuse.

Translation and cross-cultural adaptation of a standardized international questionnaire on use of alternative and complementary medicine (I-CAM - Q) for Argentina.

PubMed

Esteban, Santiago; Vázquez Peña, Fernando; Terrasa, Sergio

2016-03-31

The widespread and growing use of alternative and complementary medicine (CAM) worldwide has been thoroughly described. In Argentina the limited information on the use of CAM has been reported between 40 and 55 %. However, the rate of use is extremely variable worldwide. For this purpose the international questionnaire on the use of complementary and alternative medicines (I-CAM - Q), was developed. The implementation of a translated and cross-culturally adapted version of the questionnaire would allow for a reliable and standardized evaluation of the rate of use of CAM in Argentina. It would be a great step towards improving what we know about the healing habits of our population. The forward and back-translation method was used. Four translators were involved. A committee was commissioned to reconcile the different versions. The process of cross-cultural adaptation was made by consulting 17 alternative and complementary medicine experts using the DELPHI method. The retrieved questionnaire was evaluated in 18 patients sampled by convenience (9 men, different educational and self-reported health levels). The interviews consisted of three parts: an initial demographics questionnaire; the administration of the I-CAM-Q and finally the cognitive interview, which included reviewing the questionnaire and reexamining questions that generated doubts during the interview. The comprehension of the questions was also evaluated. As a last step, using the information obtained from the interviews, the final version of the questionnaire was drafted. The questionnaire seems to have been accepted by most patients during the interviews. Conflictive elements that emerged did not seem to have an impact on its administration. The flexibility of the questionnaire allowed to add professionals and practices which contributed to a more accurate local adaptation. Further research should focus on assessing the questionnaire's psychometric performance and validity, which so far has not been done.

Industrial Education. Vocational Education Program Courses Standards.

ERIC Educational Resources Information Center

Florida State Dept. of Education, Tallahassee. Div. of Vocational, Adult, and Community Education.

This document contains industrial education courses standards for 183 exploratory courses, practical arts courses, and job preparatory programs offered at the secondary or postsecondary level in Florida. Each program courses standard is composed of two parts. The first part, the curriculum framework, includes four major sections: major…

29 CFR 1917.93 - Head protection.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED... of the following consensus standards: (i) ANSI Z89.1-2003, “American National Standard for Industrial... National Standard for Industrial Head Protection,” which is incorporated by reference in § 1917.3; or (iii...

29 CFR 1917.93 - Head protection.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED... of the following consensus standards: (i) ANSI Z89.1-2003, “American National Standard for Industrial... National Standard for Industrial Head Protection,” which is incorporated by reference in § 1917.3; or (iii...

Industrial Process Cooling Towers: National Emission Standards for Hazardous Air Pollutants

EPA Pesticide Factsheets

Standards limiting discharge of chromium compound air emissions from industrial process cooling towers (IPCT's). Includes rule history, Federal Registry citations, implementation information and additional resources.

Industry Initiated Core Safety Attributes for Human Spaceflight for the 7th IAASS Conference

NASA Technical Reports Server (NTRS)

Mango, Edward J.

2014-01-01

Now that the NASA Commercial Crew Program (CCP) is beginning its full certification contract for crew transportation to the International Space Station (ISS), is it time for industry to embrace a minimum set of core safety attributes? Those attributes can then be evolved into an industry-led set of basic safety standards and requirements. After 50 years of human space travel sponsored by governments, there are two basic conditions that now exist within the international space industry. The first, there is enough of a space-faring history to encourage the space industry to design, develop and operate human spaceflight systems without government contracts for anything other than services. Second, industry is capable of defining and enforcing a set of industry-based safety attributes and standards for human spaceflight to low-Earth orbit (LEO). This paper will explore both of these basic conditions with a focus on the safety attributes and standards. In the United States, the Federal Aviation Administration (FAA) is now starting to dialogue with industry about the basic safety principles and attributes needed for potential future regulatory oversight. This process is not yet formalized and will take a number of years once approval is given to move forward. Therefore, throughout the next few years, it is an excellent time and opportunity for industry to collaborate together and develop the core set of attributes and standards. As industry engages and embraces a common set of safety attributes, then government agencies, like the FAA and NASA can use that industry-based product to strengthen their efforts on a safe commercial spaceflight foundation for the future. As the commercial space industry takes the lead role in establishing core safety attributes, and then enforcing those attributes, the entire planet can move away from governmental control of design and development and let industry expand safe and successful space operations in LEO. At that point the governmental agencies can focus on oversight of the industries' defined standards and enforcement for common welfare of the space-faring populous and overall public safety.

49 CFR 1331.5 - Additional standards for retaining antitrust immunity by passenger bus industry rate bureaus.

Code of Federal Regulations, 2011 CFR

2011-10-01

... immunity by passenger bus industry rate bureaus. 1331.5 Section 1331.5 Transportation Other Regulations... standards for retaining antitrust immunity by passenger bus industry rate bureaus. (a) Rate bureaus must... of immunity for that activity. (b) The bureaus are required to maintain detailed minutes of all...

49 CFR 1331.5 - Additional standards for retaining antitrust immunity by passenger bus industry rate bureaus.

Code of Federal Regulations, 2012 CFR

2012-10-01

... immunity by passenger bus industry rate bureaus. 1331.5 Section 1331.5 Transportation Other Regulations... standards for retaining antitrust immunity by passenger bus industry rate bureaus. (a) Rate bureaus must... of immunity for that activity. (b) The bureaus are required to maintain detailed minutes of all...

49 CFR 1331.5 - Additional standards for retaining antitrust immunity by passenger bus industry rate bureaus.

Code of Federal Regulations, 2013 CFR

2013-10-01

... immunity by passenger bus industry rate bureaus. 1331.5 Section 1331.5 Transportation Other Regulations... standards for retaining antitrust immunity by passenger bus industry rate bureaus. (a) Rate bureaus must... of immunity for that activity. (b) The bureaus are required to maintain detailed minutes of all...

49 CFR 1331.5 - Additional standards for retaining antitrust immunity by passenger bus industry rate bureaus.

Code of Federal Regulations, 2010 CFR

2010-10-01

... immunity by passenger bus industry rate bureaus. 1331.5 Section 1331.5 Transportation Other Regulations... standards for retaining antitrust immunity by passenger bus industry rate bureaus. (a) Rate bureaus must... of immunity for that activity. (b) The bureaus are required to maintain detailed minutes of all...

49 CFR 1331.5 - Additional standards for retaining antitrust immunity by passenger bus industry rate bureaus.

Code of Federal Regulations, 2014 CFR

2014-10-01

... immunity by passenger bus industry rate bureaus. 1331.5 Section 1331.5 Transportation Other Regulations... standards for retaining antitrust immunity by passenger bus industry rate bureaus. (a) Rate bureaus must... of immunity for that activity. (b) The bureaus are required to maintain detailed minutes of all...

48 CFR 19.303 - Determining North American Industry Classification System (NAICS) codes and size standards.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 1 2011-10-01 2011-10-01 false Determining North American Industry Classification System (NAICS) codes and size standards. 19.303 Section 19.303 Federal Acquisition... of Small Business Status for Small Business Programs 19.303 Determining North American Industry...

Strategic Industrial Alliances in Paper Industry: XML- vs Ontology-Based Integration Platforms

ERIC Educational Resources Information Center

Naumenko, Anton; Nikitin, Sergiy; Terziyan, Vagan; Zharko, Andriy

2005-01-01

Purpose: To identify cases related to design of ICT platforms for industrial alliances, where the use of Ontology-driven architectures based on Semantic web standards is more advantageous than application of conventional modeling together with XML standards. Design/methodology/approach: A comparative analysis of the two latest and the most obvious…

Complementary therapies for labour and birth study: a randomised controlled trial of antenatal integrative medicine for pain management in labour.

PubMed

Levett, Kate M; Smith, C A; Bensoussan, A; Dahlen, H G

2016-07-12

To evaluate the effect of an antenatal integrative medicine education programme in addition to usual care for nulliparous women on intrapartum epidural use. Open-label, assessor blind, randomised controlled trial. 2 public hospitals in Sydney, Australia. 176 nulliparous women with low-risk pregnancies, attending hospital-based antenatal clinics. The Complementary Therapies for Labour and Birth protocol, based on the She Births and acupressure for labour and birth courses, incorporated 6 evidence-based complementary medicine techniques: acupressure, visualisation and relaxation, breathing, massage, yoga techniques, and facilitated partner support. Randomisation occurred at 24-36 weeks' gestation, and participants attended a 2-day antenatal education programme plus standard care, or standard care alone. Rate of analgesic epidural use. Secondary: onset of labour, augmentation, mode of birth, newborn outcomes. There was a significant difference in epidural use between the 2 groups: study group (23.9%) standard care (68.7%; risk ratio (RR) 0.37 (95% CI 0.25 to 0.55), p≤0.001). The study group participants reported a reduced rate of augmentation (RR=0.54 (95% CI 0.38 to 0.77), p<0.0001); caesarean section (RR=0.52 (95% CI 0.31 to 0.87), p=0.017); length of second stage (mean difference=-0.32 (95% CI -0.64 to 0.002), p=0.05); any perineal trauma (0.88 (95% CI 0.78 to 0.98), p=0.02) and resuscitation of the newborn (RR=0.47 (95% CI 0.25 to 0.87), p≤0.015). There were no statistically significant differences found in spontaneous onset of labour, pethidine use, rate of postpartum haemorrhage, major perineal trauma (third and fourth degree tears/episiotomy), or admission to special care nursery/neonatal intensive care unit (p=0.25). The Complementary Therapies for Labour and Birth study protocol significantly reduced epidural use and caesarean section. This study provides evidence for integrative medicine as an effective adjunct to antenatal education, and contributes to the body of best practice evidence. ACTRN12611001126909. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Standardized Mixed-Meal Tolerance and Arginine Stimulation Tests Provide Reproducible and Complementary Measures of β-Cell Function: Results From the Foundation for the National Institutes of Health Biomarkers Consortium Investigative Series

PubMed Central

Shankar, Sudha S.; Vella, Adrian; Raymond, Ralph H.; Staten, Myrlene A.; Calle, Roberto A.; Bergman, Richard N.; Cao, Charlie; Chen, Danny; Cobelli, Claudio; Dalla Man, Chiara; Deeg, Mark; Dong, Jennifer Q.; Lee, Douglas S.; Polidori, David; Robertson, R. Paul; Ruetten, Hartmut; Stefanovski, Darko; Vassileva, Maria T.; Weir, Gordon C.

2016-01-01

OBJECTIVE Standardized, reproducible, and feasible quantification of β-cell function (BCF) is necessary for the evaluation of interventions to improve insulin secretion and important for comparison across studies. We therefore characterized the responses to, and reproducibility of, standardized methods of in vivo BCF across different glucose tolerance states. RESEARCH DESIGN AND METHODS Participants classified as having normal glucose tolerance (NGT; n = 23), prediabetes (PDM; n = 17), and type 2 diabetes mellitus (T2DM; n = 22) underwent two standardized mixed-meal tolerance tests (MMTT) and two standardized arginine stimulation tests (AST) in a test-retest paradigm and one frequently sampled intravenous glucose tolerance test (FSIGT). RESULTS From the MMTT, insulin secretion in T2DM was >86% lower compared with NGT or PDM (P < 0.001). Insulin sensitivity (Si) decreased from NGT to PDM (∼50%) to T2DM (93% lower [P < 0.001]). In the AST, insulin secretory response to arginine at basal glucose and during hyperglycemia was lower in T2DM compared with NGT and PDM (>58%; all P < 0.001). FSIGT showed decreases in both insulin secretion and Si across populations (P < 0.001), although Si did not differ significantly between PDM and T2DM populations. Reproducibility was generally good for the MMTT, with intraclass correlation coefficients (ICCs) ranging from ∼0.3 to ∼0.8 depending on population and variable. Reproducibility for the AST was very good, with ICC values >0.8 across all variables and populations. CONCLUSIONS Standardized MMTT and AST provide reproducible and complementary measures of BCF with characteristics favorable for longitudinal interventional trials use. PMID:27407117

Standardized Mixed-Meal Tolerance and Arginine Stimulation Tests Provide Reproducible and Complementary Measures of β-Cell Function: Results From the Foundation for the National Institutes of Health Biomarkers Consortium Investigative Series.

PubMed

Shankar, Sudha S; Vella, Adrian; Raymond, Ralph H; Staten, Myrlene A; Calle, Roberto A; Bergman, Richard N; Cao, Charlie; Chen, Danny; Cobelli, Claudio; Dalla Man, Chiara; Deeg, Mark; Dong, Jennifer Q; Lee, Douglas S; Polidori, David; Robertson, R Paul; Ruetten, Hartmut; Stefanovski, Darko; Vassileva, Maria T; Weir, Gordon C; Fryburg, David A

2016-09-01

Standardized, reproducible, and feasible quantification of β-cell function (BCF) is necessary for the evaluation of interventions to improve insulin secretion and important for comparison across studies. We therefore characterized the responses to, and reproducibility of, standardized methods of in vivo BCF across different glucose tolerance states. Participants classified as having normal glucose tolerance (NGT; n = 23), prediabetes (PDM; n = 17), and type 2 diabetes mellitus (T2DM; n = 22) underwent two standardized mixed-meal tolerance tests (MMTT) and two standardized arginine stimulation tests (AST) in a test-retest paradigm and one frequently sampled intravenous glucose tolerance test (FSIGT). From the MMTT, insulin secretion in T2DM was >86% lower compared with NGT or PDM (P < 0.001). Insulin sensitivity (Si) decreased from NGT to PDM (∼50%) to T2DM (93% lower [P < 0.001]). In the AST, insulin secretory response to arginine at basal glucose and during hyperglycemia was lower in T2DM compared with NGT and PDM (>58%; all P < 0.001). FSIGT showed decreases in both insulin secretion and Si across populations (P < 0.001), although Si did not differ significantly between PDM and T2DM populations. Reproducibility was generally good for the MMTT, with intraclass correlation coefficients (ICCs) ranging from ∼0.3 to ∼0.8 depending on population and variable. Reproducibility for the AST was very good, with ICC values >0.8 across all variables and populations. Standardized MMTT and AST provide reproducible and complementary measures of BCF with characteristics favorable for longitudinal interventional trials use. © 2016 by the American Diabetes Association.

Results with Complementary Food Using Local Food Ingredients.

PubMed

Ahmed, Tahmeed; Islam, Munirul; Choudhury, Nuzhat; Hossain, Iqbal; Huq, Sayeeda; Mahfuz, Mustafa; Sarker, Shafiqul Alam

2017-01-01

Appropriate complementary food is a must for optimum growth of infants and children. The food should be diverse and be given in sufficient quantities 2-4 times a day depending upon age. Poverty, food insecurity, and lack of awareness regarding the choice of nutritious food ingredients are deterrents to optimum complementary feeding. In Bangladesh, 77% of children do not receive appropriate complementary food and, hence, the high prevalence of childhood malnutrition. We developed ready-to-use complementary foods (RUCFs) using locally available food ingredients, rice/lentil and chickpea, which conform to standard specifications. These foods were found to be acceptable by children and their mothers compared to the Pushti packet, the cereal-based supplement used in the erstwhile National Nutrition Program of Bangladesh. In a cluster-randomized community-based trial in rural Bangladesh among more than 5,000 children, the efficacy of rice/lentil- and chickpea-based RUCFs was compared with another commonly used supplementary food called wheat-soy blend++ (WSB++) and a commercial product called Plumpy'doz. Deceleration in length for age was significantly lower (by 0.02-0.04/month) in the rice/lentil, Plumpy'doz, and chickpea groups compared to the control group at 18 months of age. Weight-for-length z-score decline was lower only in Plumpy'doz and chickpea groups. WSB++ was not different from the control group. In children who received chickpea RUCF or Plumpy'doz, the prevalence of stunting was 5-6% lower at 18 months. These foods can be used to prevent or treat malnutrition among children, particularly those from food-insecure households. © 2017 Nestec Ltd., Vevey/S. Karger AG, Basel.

Machine Tool Advanced Skills Technology (MAST). Common Ground: Toward a Standards-Based Training System for the U.S. Machine Tool and Metal Related Industries. Volume 13: Laser Machining, of a 15-Volume Set of Skill Standards and Curriculum Training Materials for the Precision Manufacturing Industry.

ERIC Educational Resources Information Center

Texas State Technical Coll., Waco.

This document is intended to help education and training institutions deliver the Machine Tool Advanced Skills Technology (MAST) curriculum to a variety of individuals and organizations. MAST consists of industry-specific skill standards and model curricula for 15 occupational specialty areas within the U.S. machine tool and metals-related…

Machine Tool Advanced Skills Technology (MAST). Common Ground: Toward a Standards-Based Training System for the U.S. Machine Tool and Metal Related Industries. Volume 6: Welding, of a 15-Volume Set of Skill Standards and Curriculum Training Materials for the Precision Manufacturing Industry.

ERIC Educational Resources Information Center

Texas State Technical Coll., Waco.

This document is intended to help education and training institutions deliver the Machine Tool Advanced Skills Technology (MAST) curriculum to a variety of individuals and organizations. MAST consists of industry-specific skill standards and model curricula for 15 occupational specialty areas within the U.S. machine tool and metals-related…

Machine Tool Advanced Skills Technology (MAST). Common Ground: Toward a Standards-Based Training System for the U.S. Machine Tool and Metal Related Industries. Volume 12: Instrumentation, of a 15-Volume Set of Skill Standards and Curriculum Training Materials for the Precision Manufacturing Industry.

ERIC Educational Resources Information Center

Texas State Technical Coll., Waco.

This document is intended to help education and training institutions deliver the Machine Tool Advanced Skills Technology (MAST) curriculum to a variety of individuals and organizations. MAST consists of industry-specific skill standards and model curricula for 15 occupational specialty areas within the U.S. machine tool and metals-related…

Machine Tool Advanced Skills Technology (MAST). Common Ground: Toward a Standards-Based Training System for the U.S. Machine Tool and Metal Related Industries. Volume 5: Mold Making, of a 15-Volume Set of Skill Standards and Curriculum Training Materials for the Precision Manufacturing Industry.

ERIC Educational Resources Information Center

Texas State Technical Coll., Waco.

This document is intended to help education and training institutions deliver the Machine Tool Advanced Skills Technology (MAST) curriculum to a variety of individuals and organizations. MAST consists of industry-specific skill standards and model curricula for 15 occupational speciality areas within the U.S. machine tool and metals-related…

Machine Tool Advanced Skills Technology (MAST). Common Ground: Toward a Standards-Based Training System for the U.S. Machine Tool and Metal Related Industries. Volume 3: Machining, of a 15-Volume Set of Skill Standards and Curriculum Training Materials for the Precision Manufacturing Industry.

ERIC Educational Resources Information Center

Texas State Technical Coll., Waco.

This document is intended to help education and training institutions deliver the Machine Tool Advanced Skills Technology (MAST) curriculum to a variety of individuals and organizations. MAST consists of industry-specific skill standards and model curricula for 15 occupational specialty areas within the U.S. machine tool and metals-related…

77 FR 14343 - Announcement of the American Petroleum Institute's Standards Activities

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-09

... Petroleum Institute develops and publishes voluntary standards for equipment, materials, operations, and processes for the petroleum and natural gas industry. These standards are used by both private industry and... Transportation of Line Pipe, 1st Edition. Recommended Practice 6DR, Repair and Remanufacture of Pipeline Valves...

77 FR 9303 - National Emission Standards for Hazardous Air Pollutants From Coal- and Oil-Fired Electric...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-16

... Utility Steam Generating Units and Standards of Performance for Fossil-Fuel-Fired Electric Utility... Performance for Fossil-Fuel-Fired Electric Utility, Industrial-Commercial-Institutional, and Small Industrial... electric utility steam generating units (EGUs) and standards of performance for fossil-fuel-fired electric...

78 FR 24073 - Reconsideration of Certain New Source Issues: National Emission Standards for Hazardous Air...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-24

... Standards of Performance for Fossil-Fuel-Fired Electric Utility, Industrial-Commercial- Institutional, and... Standards of Performance for Fossil-Fuel- Fired Electric Utility, Industrial-Commercial-Institutional, and...). Certain other material, such as copyrighted material, will be publicly available only in hard copy form...

Illinois Occupational Skill Standards: Industrial Maintenance General Maintenance Cluster.

ERIC Educational Resources Information Center

Illinois Occupational Skill Standards and Credentialing Council, Carbondale.

These skill standards for the industrial maintenance general maintenance cluster are intended to be a guide to workforce preparation program providers in defining content for their programs and to employers to establish the skills and standards necessary for job acquisition. An introduction provides the Illinois perspective; Illinois Occupational…

National Apprenticeship and Training Standards for the Sheet Metal Industry. Revised.

ERIC Educational Resources Information Center

Employment and Training Administration (DOL), Washington, DC. Bureau of Apprenticeship and Training.

These national standards are designed to aid contractors, labor, and joint committees in setting up, conducting, and improving apprenticeship programs for individuals seeking to become skilled in the sheet metal industry. Covered in the individual sections are the following topics: the provisions of the apprenticeship standards (definitions,…

Adaptation of industry standards to PACS

NASA Astrophysics Data System (ADS)

Lee, Joseph K.; Yin, Lloyd; Huang, H. K.; Wong, Albert W. K.

1994-05-01

Imagery and textual communications among healthcare information systems, medical imaging equipment, and picture archiving and communication systems (PACS) have always been difficult as each of these components varies with platforms, modalities, and manufacturers. With the emerging of industry standards, it become feasible to integrate all these heterogeneous, disparate medical images and textual data. This paper describes two such major industry standards: Health Level 7 (HL7) and ACR/NEMA. In conforming to the HL7 standard, we are able to share medical information between the hospital information systems, radiology information systems, and PACS. By adapting the ACR/NEMA 2.0 standard, we also can convert medical images generated from a variety of modalities and manufacturers to its standardized data format. The conversion is based on the data dictionary defined in the ACR/NEMA 2.0 document.

Standards for electronic imaging for graphic arts systems

NASA Astrophysics Data System (ADS)

Dunn, S. T.; Dunn, Patrice M.

1991-03-01

This paper examines the development of electronic imaging standards by and for the graphic arts industry. Taken collectively this body of work is referred to as Digital Data Exchange Standards (DDES). Because these standards are being driven by market and user requirements there are several fundamental guiding principles to their development. This paper examines these and provides an overview to the technical developments undertaken by the accredited graphic arts industry standards committees to date.

“French Phage Network”—Second Meeting Report

PubMed Central

Torres-Barceló, Clara; Kaltz, Oliver; Froissart, Rémy; Gandon, Sylvain; Ginet, Nicolas; Ansaldi, Mireille

2017-01-01

The study of bacteriophages (viruses of bacteria) includes a variety of approaches, such as structural biology, genetics, ecology, and evolution, with increasingly important implications for therapeutic and industrial uses. Researchers working with phages in France have recently established a network to facilitate the exchange on complementary approaches, but also to engage new collaborations. Here, we provide a summary of the topics presented during the second meeting of the French Phage Network that took place in Marseille in November 2016. PMID:28430166

Design of electric vehicle charging station based on wind and solar complementary power supply

NASA Astrophysics Data System (ADS)

Wang, Li

2018-05-01

Electric vehicles have become a major trend in the development of the automobile industry. Green energy saving is an important feature of their development. At the same time, the related charging facilities construction is also critical. If we improve the charging measures to adapt to its green energy-saving features, it will be to a greater extent to promote its further development. This article will propose a highly efficient green energy-saving charging station designed for the electric vehicles.

Every document and picture tells a story: using internal corporate document reviews, semiotics, and content analysis to assess tobacco advertising.

PubMed

Anderson, S J; Dewhirst, T; Ling, P M

2006-06-01

In this article we present communication theory as a conceptual framework for conducting documents research on tobacco advertising strategies, and we discuss two methods for analysing advertisements: semiotics and content analysis. We provide concrete examples of how we have used tobacco industry documents archives and tobacco advertisement collections iteratively in our research to yield a synergistic analysis of these two complementary data sources. Tobacco promotion researchers should consider adopting these theoretical and methodological approaches.

Technology Opportunities to Reduce U.S. Greenhouse Gas Emissions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pena, Federico

1997-10-01

This report serves as the technology basis of a needed national climate change technology strategy, with the confidence that a strong technology R&D program will deliver a portfolio of technologies with the potential to provide very substantial greenhouse gas emission reductions along with continued economic growth. Much more is needed to define such a strategy, including identification of complementary deployment policies and analysis to support the seeping and prioritization of R&D programs. A national strategy must be based upon governmental, industrial, and academic partnerships.

77 FR 55737 - Small Business Size Standards: Finance and Insurance and Management of Companies and Enterprises

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-11

...The U.S. Small Business Administration (SBA) proposes to increase small business size standards for 37 industries in North American Industry Classification System (NAICS) Sector 52, Finance and Insurance, and for two industries in NAICS Sector 55, Management of Companies and Enterprises. In addition, SBA proposes to change the measure of size from average assets to average receipts for NAICS 522293, International Trade Financing. As part of its ongoing comprehensive size standards review, SBA evaluated all receipts based and assets based size standards in NAICS Sectors 52 and 55 to determine whether they should be retained or revised. This proposed rule is one of a series of proposed rules that will review size standards of industries grouped by NAICS Sector. SBA issued a White Paper entitled ``Size Standards Methodology'' and published a notice in the October 21, 2009 issue of the Federal Register to advise the public that the document is available on its Web site at www.sba.gov/size for public review and comments. The ``Size Standards Methodology'' White Paper explains how SBA establishes, reviews, and modifies its receipts based and employee based small business size standards. In this proposed rule, SBA has applied its methodology that pertains to establishing, reviewing, and modifying a receipts based size standard.

Analytical evaluation of current starch methods used in the international sugar industry: Part I.

PubMed

Cole, Marsha; Eggleston, Gillian; Triplett, Alexa

2017-08-01

Several analytical starch methods exist in the international sugar industry to mitigate starch-related processing challenges and assess the quality of traded end-products. These methods use iodometric chemistry, mostly potato starch standards, and utilize similar solubilization strategies, but had not been comprehensively compared. In this study, industrial starch methods were compared to the USDA Starch Research method using simulated raw sugars. Type of starch standard, solubilization approach, iodometric reagents, and wavelength detection affected total starch determination in simulated raw sugars. Simulated sugars containing potato starch were more accurately detected by the industrial methods, whereas those containing corn starch, a better model for sugarcane starch, were only accurately measured by the USDA Starch Research method. Use of a potato starch standard curve over-estimated starch concentrations. Among the variables studied, starch standard, solubilization approach, and wavelength detection affected the sensitivity, accuracy/precision, and limited the detection/quantification of the current industry starch methods the most. Published by Elsevier Ltd.

Dolphin-Assisted Therapy for Children with Special Needs: A Pilot Study

ERIC Educational Resources Information Center

Dilts, Rachel; Trompisch, Norbert; Bergquist, Timothy M.

2011-01-01

Dolphin-assisted therapy (DAT), as a part of animal-assisted therapy and complementary and alternative medicine, yields several positive results. This study intended to add to DAT effectiveness research while using a standardized assessment. In the Ukraine, a DAT program called DolphinSwim agreed to take part in research with 37 voluntary…

Making A D-Latch Sensitive To Alpha Particles

NASA Technical Reports Server (NTRS)

Buehler, Martin G.; Blaes, Brent R.; Nixon, Robert H.

1994-01-01

Standard complementary metal oxide/semiconductor (CMOS) D-latch integrated circuit modified to increase susceptibility to single-event upsets (SEU's) (changes in logic state) caused by impacts of energetic alpha particles. Suitable for use in relatively inexpensive bench-scale SEU tests of itself and of related integrated circuits like static random-access memories.

Gender, Policy and Initial Teacher Education

ERIC Educational Resources Information Center

Skelton, Christine

2007-01-01

An examination of gender discourses within New Labour education policy on the preparation of students for a career in teaching in the UK reveals a contradictory yet, at the same time, complementary position. In the guidelines outlining the Standards that a prospective teacher has to achieve, the ways in which gender informs pupils' educational…

FIFO Buffer for Asynchronous Data Streams

NASA Technical Reports Server (NTRS)

Bascle, K. P.

1985-01-01

Variable-rate, asynchronous data signals from up to four measuring instruments or other sources combined in first-in/first-out (FIFO) buffer for transmission on single channel. Constructed in complementary metal-oxide-semiconductor (CMOS) logic, buffer consumes low power (only 125 mW at 5V) and conforms to aerospace standards of reliability and maintainability.

Crystalline cellulose elastic modulus predicted by atomistic models of uniform deformation and nanoscale indentation

Treesearch

Xiawa Wu; Robert J. Moon; Ashlie Martini

2013-01-01

The elastic modulus of cellulose Iß in the axial and transverse directions was obtained from atomistic simulations using both the standard uniform deformation approach and a complementary approach based on nanoscale indentation. This allowed comparisons between the methods and closer connectivity to experimental measurement techniques. A reactive...

76 FR 46083 - Secondary National Ambient Air Quality Standards for Oxides of Nitrogen and Sulfur

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-01

...-1145, by one of the following methods: http://www.regulations.gov : Follow the on-line instructions for..., Research Triangle Park, NC 27711; telephone: 919- 541-4650; fax: 919-541-2357; e-mail: [email protected] Complementary Areas of Research Implementation Challenges 5. Final Monitoring Plan Development and Stakeholder...

Employability of Nigerian Graduates, the Role of Stakeholders

ERIC Educational Resources Information Center

Abiodun-Oyebanji, Olayemi Jumoke

2015-01-01

This paper examines the worrisome issue of employability of Nigerian university graduates in recent times, which have become a great concern to all and sundry. Certain indices such as, lack of complementary life skills, low moral standards, low employment generating capacity of the Nigerina economy, and the certification mentality, are discussed.…

Efficiency of snake sampling methods in the Brazilian semiarid region.

PubMed

Mesquita, Paula C M D; Passos, Daniel C; Cechin, Sonia Z

2013-09-01

The choice of sampling methods is a crucial step in every field survey in herpetology. In countries where time and financial support are limited, the choice of the methods is critical. The methods used to sample snakes often lack objective criteria, and the traditional methods have apparently been more important when making the choice. Consequently researches using not-standardized methods are frequently found in the literature. We have compared four commonly used methods for sampling snake assemblages in a semiarid area in Brazil. We compared the efficacy of each method based on the cost-benefit regarding the number of individuals and species captured, time, and financial investment. We found that pitfall traps were the less effective method in all aspects that were evaluated and it was not complementary to the other methods in terms of abundance of species and assemblage structure. We conclude that methods can only be considered complementary if they are standardized to the objectives of the study. The use of pitfall traps in short-term surveys of the snake fauna in areas with shrubby vegetation and stony soil is not recommended.

Review of Special Standards in Quality Management Systems Audits in Automotive Production

NASA Astrophysics Data System (ADS)

Šurinová, Yulia

2013-12-01

Quality management systems (QMS) in automotive industry generally have several differences in comparison with other industrial branches. Different customers have their own specific requirements, including requirements for quality audits. Audits are one of the coretools of quality management to make the PDCA (Plan - Do - Check - Act) cycle work. As a matter of fact, compliance with ISO/TS 16949:2009 requirements is a condition for supplying the automotive industry. However, there are some standards which co-exist together with the ISO 9001 based management systems and technical specification for QMS in automotive ISO/TS16949. Which are those specific standards in automotive industry and what standard to use and why - those are the questions to be answered in this paper. The aim of the paper is to review what standards are used for audits implementation in automotive industry in the Slovak Republic, and why the organizations keep following those "extra" standards even if certification for ISO/TS 16949 is required by all the car makers. The paper is structured as follows: after short introduction to the topic and related terms, presented is our methodology. . In the third section, the achieved results are discussed. And finally, the principal findings of the paper, limitations and conclusions are presented.

Medical pluralism: global perspectives on equity issues.

PubMed

Marian, Florica

2007-12-01

Over the last decades, awareness has increased about the phenomenon of medical pluralism and the importance to integrate biomedicine and other forms of health care. The broad variety of healing cultures existing alongside biomedicine is called complementary or alternative medicine (CAM) in industrialized countries and traditional medicine (TM) in developing countries. Considerable debate has arisen about ethical problems related to the growing use of CAM in industrialized countries. This article focuses on equity issues and aims to consider them from a global perspective of medical pluralism. Several dimensions of equity are explored and their interrelatedness discussed: access to care, research (paradigm and founding) and recognition. This so-called 'equity circle' is then related to Iris Marion Young's justice theory and particularly to the concepts of cultural imperialism, powerlessness and marginalisation.

Solar industrial process heat systems: An assessment of standards for materials and components

NASA Astrophysics Data System (ADS)

Rossiter, W. J.; Shipp, W. E.

1981-09-01

A study was conducted to obtain information on the performance of materials and components in operational solar industrial process heat (PH) systems, and to provide recommendations for the development of standards including evaluative test procedures for materials and components. An assessment of the needs for standards for evaluating the long-term performance of materials and components of IPH systems was made. The assessment was based on the availability of existing standards, and information obtained from a field survey of operational systems, the literature, and discussions with individuals in the industry. Field inspections of 10 operational IPH systems were performed.

SAMICS: Input data preparation. [Solar Array Manufacturing Industry Costing Standards

NASA Technical Reports Server (NTRS)

Chamberlain, R. G.; Aster, R. W.

1979-01-01

The Solar Array Manufacturing Industry Costing Standards (SAMICS) provide standard formats, data, assumptions, and procedures for estimating the price that a manufacturer would have to charge for the product of a specified manufacturing process sequence. A line-by-line explanation is given of those standard formats which describe the economically important characteristics of the manufacturing processes and the technological structure of the companies and the industry. This revision provides an updated presentation of Format A Process Description, consistent with the October 1978 version of that form. A checklist of items which should be entered on Format A as direct expenses is included.

Developing global health technology standards: what can other industries teach us?

PubMed Central

2013-01-01

Background There is a lack of effective and affordable technologies to address health needs in the developing world. One way to address problems of innovation and affordability is to design global health technologies to follow agreed-upon standards. This Debate article argues that we can better develop standards for global health technologies if we learn lessons from other industries. Discussion The article’s Background section begins by explaining why standards are needed in global health. For example, if global health technologies can be modularized into independent interfacing parts, these parts can then interact via well-defined standards in a “plug and play” fashion. This can avoid development of mutually incompatible solutions by different organizations, speed the pace of innovation, unlock health systems from single providers and approaches, and lower barriers to entry. The Background then gives a brief primer on standards and discusses incentives for health standards. The article’s Discussion section begins with brief relevant cases of standards development from other industries, including electricity, container shipping, CD standards, Universal Serial Bus (USB), and the Internet. It then explores lessons from these and other industries that suggest how to develop standards for global health technologies. The remainder of the Discussion considers intellectual property and regulatory issues and standards-based global health business models, and ends with a checklist of considerations for health standards development leaders. (The associated Additional file discusses observations from standards development for cell phones and semiconductors, as well as challenges in the standards development process itself.) Throughout the article, point-of-care diagnostics are used as an illustrative example. An initiative is already underway to explore standardized diagnostics platforms. Summary This Debate article aims to convince the reader that standards can benefit global health technologies if we learn lessons from other industries. The article draws from historical examples and the authors’ experiences to suggest principles, challenges, and opportunities in developing these standards. If implemented well, standardized platforms can lower barriers to entry, improve affordability, and create a vibrant ecosystem of innovative new global health technologies. PMID:24134866

Complementary Feeding Interventions Have a Small but Significant Impact on Linear and Ponderal Growth of Children in Low- and Middle-Income Countries: A Systematic Review and Meta-Analysis.

PubMed

Panjwani, Anita; Heidkamp, Rebecca

2017-11-01

Background: World Health Assembly member states have committed to ambitious global targets for reductions in stunting and wasting by 2025. Improving complementary diets of children aged 6-23 mo is a recommended approach for reducing stunting in children <5 y old. Less is known about the potential of these interventions to prevent wasting. Objective: The aim of this article was to review and synthesize the current literature for the impact of complementary feeding interventions on linear [length-for-age z score (LAZ)] and ponderal [weight-for-length z score (WLZ)] growth of children aged 6-23 mo, with the specific goal of updating intervention-outcome linkages in the Lives Saved Tool (LiST). Methods: We started our review with studies included in the previous LiST review and searched for articles published since January 2012. We identified longitudinal trials that compared children aged 6-23 mo who received 1 of 2 types of complementary feeding interventions (nutrition education or counseling alone or complementary food supplementation with or without nutrition education or counseling) with a no-intervention control. We assessed study quality and generated pooled estimates of LAZ and WLZ change, as well as length and weight gain, for each category of intervention. Results: Interventions that provided nutrition education or counseling had a small but significant impact on linear growth in food-secure populations [LAZ standardized mean difference (SMD): 0.11; 95% CI: 0.01, 0.22] but not on ponderal growth. Complementary food supplementation interventions with or without nutrition education also had a small, significant effect in food-insecure settings on both LAZ (SMD: 0.08; 95% CI: 0.04, 0.13) and WLZ (SMD: 0.05; 95% CI: 0.01, 0.08). Conclusions: Nutrition education and complementary feeding interventions both had a small but significant impact on linear growth, and complementary feeding interventions also had an impact on ponderal growth of children aged 6-23 mo in low- and middle-income countries. The updated LiST model will support nutrition program planning and evaluation efforts by allowing users to model changes in intervention coverage on both stunting and wasting. © 2017 American Society for Nutrition.

48 CFR 19.303 - Determining North American Industry Classification System (NAICS) codes and size standards.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Determining North American Industry Classification System (NAICS) codes and size standards. 19.303 Section 19.303 Federal Acquisition... Classification System (NAICS) codes and size standards. (a) The contracting officer shall determine the...

Gateway to the Future. Skill Standards for the Bioscience Industry for Technical Workers in Pharmaceutical Companies, Biotechnology Companies, and Clinical Laboratories.

ERIC Educational Resources Information Center

Education Development Center, Inc., Newton, MA.

The Bioscience Industry Skills Standards Project (BISSP) is developing national, voluntary skill standards for technical jobs in biotechnology and pharmaceutical companies and clinical laboratories in hospitals, universities, government, and independent settings. Research with employees and educators has pinpointed three issues underscoring the…

State Initiatives on Industry-Based Skill Standards and Credentials.

ERIC Educational Resources Information Center

Ganzglass, Evelyn; Simon, Martin

A study examined state initiatives for industry-based skill standards and credentials. Officials in 19 states were interviewed, case studies of programs in 3 states (Georgia, Pennsylvania, and Texas) were conducted, and focus group discussions were held with 25 individuals. State skill standards were generally found to be tied to broader efforts…

The role of stakeholders in developing an international regulatory framework for carbon capture and storage

NASA Astrophysics Data System (ADS)

Augustin, C. M.; Broad, K.; Swart, P. K.

2011-12-01

It is estimated that carbon capture and storage (CCS) could be used to achieve between 15% and 55% of the carbon emission reductions necessary to avoid dangerous levels of climate change. It is also believed that achieving emission reduction goals will be less costly with CCS than without it. The expansion of active CCS sites over the past decade, from three to 53 demonstrates the value that industry sees in CCS as a transition technology for governments seeking to reduce their CO2 emissions. However, to continue developing CCS for industry scale implementation, it is essential to provide the regulatory certainty needed to foster energy industry wide adoption of CCS. Existing CCS regulatory regimes are inadequate, fragmented and contradictory. There is a need for comprehensive, unifying regulations for CCS that are flexible enough to adapt as the technology develops. Governments are limited by the fact that carbon capture and storage is a multidisciplinary issue that touches on the fields of oil drilling, groundwater quality, greenhouse gas management, air quality, and risk management. Though it is in part a technological, environmental and management issue there is also a complex political element to tackling the CCS problem. Due to its cross-cutting nature, CCS regulations should be based off the best practices and standards developed by industry stakeholders. Industry standards are stakeholder developed and consensus based, created through a democratic and collaborative process by bodies such as the International Standards Organization, the National Institutes of Standards and Testing (USA), ASTM International, and the Canadian Standards Organization. Standards can typically be broken down into six general categories: test methods, specifications, classifications, practices, guides, and terminology. These standards are created by stakeholders across the industry and across geographic boundaries to create an trade-wide, rather than nationwide, consensus and ensuring that the standards are international in scope. This paper examines regulatory issues post-capture, particularly the transport and geological storage of carbon dioxide and seeks to identify areas where relevant stakeholders should collaborate to develop a comprehensive list of industry standards and provides several case study examples.

Feeding Practices and Infant Growth: Quantifying the Effects of Breastfeeding Termination and Complementary Food Introduction on BMI z-Score Growth Velocity through Growth Curve Models.

PubMed

Horodynski, Mildred A; Pierce, Steven J; Reyes-Gastelum, David; Olson, Beth; Shattuck, Mackenzie

2017-12-01

Infant feeding practices are a focus of early obesity prevention. We tested whether infant growth velocity increased after breastfeeding termination and complementary food introduction. Our secondary analysis included a sample of 547 mother-infant dyads from a longitudinal randomized controlled trial conducted in Michigan and Colorado. Infant anthropometrics at birth, baseline, and 6- and 12-month follow-up were standardized to BMI-for-age z-score (ZBMI) according to World Health Organization (WHO) growth charts. We used growth curve models with time-varying predictors to quantify effects of breastfeeding termination and timing of complementary food introduction on growth velocity. Median breastfeeding duration was 2.0 months [confidence interval (CI) = 2.0-2.5]; median introduction of complementary foods occurred at 3.0 months (CI = 2.8-3.2). Breastfed infants not yet introduced to complementary foods had an average ZBMI growth velocity of 0.050 (CI = -0.013 to 0.113) z-score units per month [zpm], not significantly faster than WHO growth trajectory (p = 0.118) defined as 0 zpm. Breastfeeding termination had negligible effect on ZBMI growth velocity (γ 11  = 0.001, CI = -0.027 to 0.030, p = 0.927). Introduction of complementary foods increased ZBMI growth velocity relative to an average child in the sample, but not significantly (γ 12  = 0.033, CI = -0.034 to 0.100, p = 0.334). Growth velocities for infants receiving complementary foods both before and after breastfeeding termination were significantly faster than the WHO growth trajectory (0.083 zpm, CI = 0.052-0.114, and 0.084 zpm, CI = 0.064-0.105, respectively, p's < 0.001). Average postcomplementary food introduction growth velocity was significantly higher than WHO growth trajectory, but did not differ from the sample's initial average trajectory. Growth curve models can accurately estimate effects of feeding practices on infant growth to direct obesity prevention efforts.

Views and experiences of healthcare professionals towards the use of African traditional, complementary and alternative medicines among patients with HIV infection: the case of eThekwini health district, South Africa.

PubMed

Nlooto, Manimbulu

2015-06-06

Many patients with human immunodeficiency virus infection use traditional, complementary, and alternative medicines and other practices to combat the disease, with some also using prescribed antiretroviral therapy provided by the public health sector. This study aimed to establish the awareness of public sector biomedical health care providers on the use of traditional, complementary and alternative medicines by HIV-infected patients who also used highly active antiretroviral therapy, and to determine whether this was based on patients seen or cases being reported to them. Potential risks of interactions between the prescribed antiretroviral and non-prescribed medication therapies may pose safety and effectiveness issues in patients using both types of treatment. A descriptive cross-sectional study, using a researcher administered semi-structured questionnaire, was conducted from June to August 2013 at ten public sector antiretroviral clinics in five regional, three specialised and two district hospitals in eThekwini Health District, South Africa. Questionnaires were administered through face-to face interview to 120 eligible participants consisting of doctors, nurses, pharmacists and post-basic pharmacist assistants in HIV clinical practice. The results are presented as percent or proportion with standard error (SE), or as frequency. Ninety-four respondents completed the questionnaire, yielding a response rate of 78.3 %. Almost half (48/94) were aware of patients using African traditional herbal medicines, over-the-counter supplements, unnamed complementary Ayurveda medicines and acupuncture. Twenty-three of the 94 respondents (24.4 %) said they had consulted patients who were using both antiretroviral therapy and certain types of non-prescribed medication in the previous three months. Awareness among healthcare providers on patient use of traditional, complementary and alternative medicines was relatively high. Few respondents had seen patients who used mostly African traditional medicines, over-the counter supplements, and negligible complementary Ayurveda medicines and acupuncture, with caution being advised in the interpretation of the former. Further research is needed to investigate communication between healthcare providers and patients in this regard, and levels of acceptance of traditional, complementary and alternative medicines by biomedical health care workers in HIV public sector practice.

Optical frequency standards for gravitational wave detection using satellite velocimetry

NASA Astrophysics Data System (ADS)

Vutha, Amar

2015-04-01

Satellite Doppler velocimetry, building on the work of Kaufmann and Estabrook and Wahlquist, is a complementary technique to interferometric methods of gravitational wave detection. This method is based on the fact that the gravitational wave amplitude appears in the apparent Doppler shift of photons propagating from an emitter to a receiver. This apparent Doppler shift can be resolved provided that a frequency standard, capable of quickly averaging down to a high stability, is available. We present a design for a space-capable optical atomic frequency standard, and analyze the sensitivity of satellite Doppler velocimetry for gravitational wave astronomy in the milli-hertz frequency band.

Complementary and alternative medicine for the treatment and diagnosis of asthma and allergic diseases.

PubMed

Passalacqua, G; Compalati, E; Schiappoli, M; Senna, G

2005-03-01

The use of Complementary/Alternative Medicines (CAM) is largely diffused and constantly increasing, especially in the field of allergic diseases and asthma. Homeopathy, acupuncture and phytotherapy are the most frequently utilised treatments, whereas complementary diagnostic techniques are mainly used in the field of food allergy-intolerance. Looking at the literature, the majority of clinical trials with CAMS are of low methodological quality, thus difficult to interpret. There are very few studies performed in a rigorously controlled fashion, and those studies provided inconclusive results. In asthma, none of the CAM have thus far been proved more effective than placebo or equally effective as standard treatments. Some herbal products, containing active principles, have displayed some clinical effect, but the herbal remedies are usually not standardised and not quantified, thus carry the risk of toxic effects or interactions. None of the alternative diagnostic techniques (electrodermal testing, kinesiology, leukocytotoxic test, iridology, hair analysis) have been proved able to distinguish between healthy and allergic subjects or to diagnose sensitizations. Therefore these tests must not be used, since they can lead to delayed or incorrect diagnosis and therapy.

Comparing methods suitable for monitoring marine mammals in low visibility conditions during seismic surveys.

PubMed

Verfuss, Ursula K; Gillespie, Douglas; Gordon, Jonathan; Marques, Tiago A; Miller, Brianne; Plunkett, Rachael; Theriault, James A; Tollit, Dominic J; Zitterbart, Daniel P; Hubert, Philippe; Thomas, Len

2018-01-01

Loud sound emitted during offshore industrial activities can impact marine mammals. Regulations typically prescribe marine mammal monitoring before and/or during these activities to implement mitigation measures that minimise potential acoustic impacts. Using seismic surveys under low visibility conditions as a case study, we review which monitoring methods are suitable and compare their relative strengths and weaknesses. Passive acoustic monitoring has been implemented as either a complementary or alternative method to visual monitoring in low visibility conditions. Other methods such as RADAR, active sonar and thermal infrared have also been tested, but are rarely recommended by regulatory bodies. The efficiency of the monitoring method(s) will depend on the animal behaviour and environmental conditions, however, using a combination of complementary systems generally improves the overall detection performance. We recommend that the performance of monitoring systems, over a range of conditions, is explored in a modelling framework for a variety of species. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

The Diamond Beamline Controls and Data Acquisition Software Architecture

NASA Astrophysics Data System (ADS)

Rees, N.

2010-06-01

The software for the Diamond Light Source beamlines[1] is based on two complementary software frameworks: low level control is provided by the Experimental Physics and Industrial Control System (EPICS) framework[2][3] and the high level user interface is provided by the Java based Generic Data Acquisition or GDA[4][5]. EPICS provides a widely used, robust, generic interface across a wide range of hardware where the user interfaces are focused on serving the needs of engineers and beamline scientists to obtain detailed low level views of all aspects of the beamline control systems. The GDA system provides a high-level system that combines an understanding of scientific concepts, such as reciprocal lattice coordinates, a flexible python syntax scripting interface for the scientific user to control their data acquisition, and graphical user interfaces where necessary. This paper describes the beamline software architecture in more detail, highlighting how these complementary frameworks provide a flexible system that can accommodate a wide range of requirements.

Electron-beam-induced-current and active secondary-electron voltage-contrast with aberration-corrected electron probes

DOE PAGES

Han, Myung-Geun; Garlow, Joseph A.; Marshall, Matthew S. J.; ...

2017-03-23

The ability to map out electrostatic potentials in materials is critical for the development and the design of nanoscale electronic and spintronic devices in modern industry. Electron holography has been an important tool for revealing electric and magnetic field distributions in microelectronics and magnetic-based memory devices, however, its utility is hindered by several practical constraints, such as charging artifacts and limitations in sensitivity and in field of view. In this article, we report electron-beam-induced-current (EBIC) and secondary-electron voltage-contrast (SE-VC) with an aberration-corrected electron probe in a transmission electron microscope (TEM), as complementary techniques to electron holography, to measure electric fieldsmore » and surface potentials, respectively. These two techniques were applied to ferroelectric thin films, multiferroic nanowires, and single crystals. Electrostatic potential maps obtained by off-axis electron holography were compared with EBIC and SE-VC to show that these techniques can be used as a complementary approach to validate quantitative results obtained from electron holography analysis.« less

Interactive Courseware Standards

DTIC Science & Technology

1992-07-01

music industry standard provides data formats and transmission specifications for musical notation. Joint Photographic Experts Group (JPEG). This...has been used in the music industry for several years, especially for electronically programmable keyboards and 16 instruments. The video compression

13 CFR 121.102 - How does SBA establish size standards?

Code of Federal Regulations, 2012 CFR

2012-01-01

... from other industries, growth trends, historical activity within an industry, unique factors occurring... standards (e.g., receipts, net income, assets) at least once every five years and submit a report to the...

13 CFR 121.102 - How does SBA establish size standards?

Code of Federal Regulations, 2014 CFR

2014-01-01

... from other industries, growth trends, historical activity within an industry, unique factors occurring... standards (e.g., receipts, net income, assets) at least once every five years and submit a report to the...

13 CFR 121.102 - How does SBA establish size standards?

Code of Federal Regulations, 2013 CFR

2013-01-01

... from other industries, growth trends, historical activity within an industry, unique factors occurring... standards (e.g., receipts, net income, assets) at least once every five years and submit a report to the...

75 FR 72739 - Compliance Testing Procedures: Correction Factor for Room Air Conditioners

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-26

... industry practices or consensus body testing standards which have been superseded by standards which are... accurate. With these facts in mind, DOE compliance enforcement forbearance, or an industry-wide waiver or...

Report from the Second International Conference of Traditional and Complementary Medicine on Health 2015

PubMed Central

Isidoro, Ciro; Huang, Chia-Chi; Sheen, Lee-Yan

2016-01-01

The Second International Conference of Traditional and Complementary Medicine on Health was held from October 24th through 27th at the GIS National Taiwan University Convention Center in Taipei. Twenty-seven invited speakers, representative of fourteen Countries, delivered their lecture in front of an audience of more than two hundreds of attendees. In addition, a poster exhibition with seventy-two presenters completed the scientific sessions. The leitmotif of the Conference was to promote a common platform in which all medical knowledge is integrated to improve the health care system. Traditional medicine and complementary medicine are characterized by a holistic approach to prevent and cure diseases, making use of natural products and/or physical manipulations. In this context, the Conference emphasized the importance of the Quality Control and of standardized methods for the authentication, preparation and characterization of the herbal products and nutrient supplements, as well as the need for controlled clinical trials and for experimental studies to demonstrate the efficacy and to understand the underlying mechanisms of the preventive and curative treatments. In this report, we highlight the novel findings and the perspectives in Traditional and Complementary Medicine (TCM; 傳統暨互補醫學 chuán tǒng jì hù bǔ yī xué) that emerged during the conference. PMID:26870692

Malnutrition among vaccinated children aged 0-5 years in Batouri, Republic of Cameroon.

PubMed

Nagahori, Chikako; Kinjo, Yoshihide; Tchuani, Jean Paul; Yamauchi, Taro

2017-12-01

Malnutrition continues to contribute to a high infant mortality rate. This study aimed to determine the prevalence of malnutrition and its potential association with the time at which complementary feeding was introduced among children aged 0-5 years in Batouri, Republic of Cameroon. Mothers (n=212) were interviewed using a structured questionnaire. Child height or length, and weight measurements were determined and the appropriate Z -scores calculated. Multiple regression analysis was performed with the values of all nutritional status indicators as dependent variables and the time of commencing complementary feeding, and the child's age and sex, as independent variables. The prevalence of stunting (height/length for age<-2 standard deviation [SD]), underweight (weight for age<-2SD), and wasting (weight for height/length<-2SD) was 45.8%, 30.2%, and 11.3%, respectively. Even taking into consideration the biological variables, there was a significant association in the effects of time of starting complementary foods on the nutritional status indicators. Furthermore, adding socio-economic variables did not produce a rise in adjusted R 2 values for all age group models concerned. Approximately 30% of the children in the study region were underweight, and approximately half of the children exhibited stunting, indicating chronic malnutrition. Commencing complementary feeding at an appropriate time had a positive effect on nutritional status from approximately 2 years of age.

One hand cannot clap-a study of Arab practitioners of traditional and complementary medicine in Israel: identifying barriers to integrative oncology care.

PubMed

Popper-Giveon, Ariela; Schiff, Elad; Hatem, David; Samuels, Noah; Ben-Arye, Eran

2014-01-01

The integration of complementary medicine is gradually becoming an accepted part of standard care for patients with cancer. In our integrative oncology program, we have encountered difficulties in recruiting Arab patients. In order to understand the special needs of this population, we conducted interviews among Arab practitioners of complementary and traditional medicine (CTM). The characteristics of practitioners and their views regarding the therapeutic process were examined. Semi-structured qualitative interviews were administered to 27 Arab practitioners of CTM whose clientele was comprised primarily of Arab cancer patients. Conventional content analysis of the transcribed interviews and field notes was performed in order to identify key themes. Three groups of CTM practice were identified: Folk-herbal medicine (n = 9), complementary medicine (CM; n = 14), and religious healing (n = 4). Seven factors were identified in the practitioner accounts: the duration and scheduling of treatment sessions, the language of communication, the presence of family members, the appearance of the practitioner, the definition of treatment goals, the discussion of behavioral and lifestyle changes, and finally, the use of tangible elements in treatment. The study of Arab CTM practitioner recommendations may help facilitate a culture-sensitive encounter with Arab patients with cancer. This approach may also have implications for other ethno-culturally unique populations. Copyright © 2014 Elsevier Inc. All rights reserved.

Economic analysis of the final effluent limitations, new source performance standards and pretreatment standards for the steam electric power industry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

This report presents the economic analysis of final effluent limitation guidelines, New Source Performance Standards, and pretreatment standards being promulgated for the steam-electric power plant point source category. It describes the costs of the final regulations, assesses the effects of these costs on the electric utility industry, and examines the cost-effectiveness of the regulations.

Machine Tool Advanced Skills Technology (MAST). Common Ground: Toward a Standards-Based Training System for the U.S. Machine Tool and Metal Related Industries. Volume 9: Tool and Die, of a 15-Volume Set of Skill Standards and Curriculum Training Materials for the Precision Manufacturing Industry.

ERIC Educational Resources Information Center

Texas State Technical Coll., Waco.

This document is intended to help education and training institutions deliver the Machine Tool Advanced Skills Technology (MAST) curriculum to a variety of individuals and organizations. MAST consists of industry-specific skill standards and model curricula for 15 occupational specialty areas within the U.S. machine tool and metals-related…

Machine Tool Advanced Skills Technology (MAST). Common Ground: Toward a Standards-Based Training System for the U.S. Machine Tool and Metal Related Industries. Volume 8: Sheet Metal & Composites, of a 15-Volume Set of Skill Standards and Curriculum Training Materials for the Precision Manufacturing Industry.

ERIC Educational Resources Information Center

Texas State Technical Coll., Waco.

This document is intended to help education and training institutions deliver the Machine Tool Advanced Skills Technology (MAST) curriculum to a variety of individuals and organizations. MAST consists of industry-specific skill standards and model curricula for 15 occupational specialty areas within the U.S. machine tool and metals-related…

Machine Tool Advanced Skills Technology (MAST). Common Ground: Toward a Standards-Based Training System for the U.S. Machine Tool and Metal Related Industries. Volume 4: Manufacturing Engineering Technology, of a 15-Volume Set of Skill Standards and Curriculum Training Materials for the Precision Manufacturing Industry.

ERIC Educational Resources Information Center

Texas State Technical Coll., Waco.

This document is intended to help education and training institutions deliver the Machine Tool Advanced Skills Technology (MAST) curriculum to a variety of individuals and organizations. MAST consists of industry-specific skill standards and model curricula for 15 occupational specialty areas within the U.S. machine tool and metals-related…

Machine Tool Advanced Skills Technology (MAST). Common Ground: Toward a Standards-Based Training System for the U.S. Machine Tool and Metal Related Industries. Volume 14: Automated Equipment Technician (CIM), of a 15-Volume Set of Skill Standards and Curriculum Training Materials for the Precision Manufacturing Industry.

ERIC Educational Resources Information Center

Texas State Technical Coll., Waco.

This document is intended to help education and training institutions deliver the Machine Tool Advanced Skills Technology (MAST) curriculum to a variety of individuals and organizations. MAST consists of industry-specific skill standards and model curricula for 15 occupational specialty areas within the U.S. machine tool and metals-related…

Machine Tool Advanced Skills Technology (MAST). Common Ground: Toward a Standards-Based Training System for the U.S. Machine Tool and Metal Related Industries. Volume 10: Computer-Aided Drafting & Design, of a 15-Volume Set of Skill Standards and Curriculum Training Materials for the Precision Manufacturing Industry.

ERIC Educational Resources Information Center

Texas State Technical Coll., Waco.

This document is intended to help education and training institutions deliver the Machine Tool Advanced Skills Technology (MAST) curriculum to a variety of individuals and organizations. MAST consists of industry-specific skill standards and model curricula for 15 occupational specialty areas within the U.S. machine tool and metals-related…

Machine Tool Advanced Skills Technology (MAST). Common Ground: Toward a Standards-Based Training System for the U.S. Machine Tool and Metal Related Industries. Volume 11: Computer-Aided Manufacturing & Advanced CNC, of a 15-Volume Set of Skill Standards and Curriculum Training Materials for the Precision Manufacturing Industry.

ERIC Educational Resources Information Center

Texas State Technical Coll., Waco.

This document is intended to help education and training institutions deliver the Machine Tool Advanced Skills Technology (MAST) curriculum to a variety of individuals and organizations. MAST consists of industry-specific skill standards and model curricula for 15 occupational specialty areas within the U.S. machine tool and metals-related…

Machine Tool Advanced Skills Technology (MAST). Common Ground: Toward a Standards-Based Training System for the U.S. Machine Tool and Metal Related Industries. Volume 2: Career Development, General Education and Remediation, of a 15-Volume Set of Skill Standards and Curriculum Training Materials for the Precision Manufacturing Industry.

ERIC Educational Resources Information Center

Texas State Technical Coll., Waco.

This document is intended to help education and training institutions deliver the Machine Tool Advanced Skills Technology (MAST) curriculum to a variety of individuals and organizations. MAST consists of industry-specific skill standards and model curricula for 15 occupational specialty areas within the U.S. machine tool and metals-related…

Common Parts Catalog for Industry Shipyards

DTIC Science & Technology

2012-01-01

U.S. marine industry. *^^ DEFENSE STANDARDIZATION PROGRAM CASE STUDY Common Parts Catalog for Industry Shipyards BACKGROUND Tin* CPC is a...surface ships and submarines. A success story for submarines was documented in an earlier I >SP case study, Tfw Virginia Class Submarine Program ...be saved through focused and disciplined standardization.The accomplishments documented m The Virginia Class Submarine Program case study provided a

Achieving Innovation and Affordability Through Standardization of Materials Development and Testing

NASA Technical Reports Server (NTRS)

Bray, M. H.; Zook, L. M.; Raley, R. E.; Chapman, C.

2011-01-01

The successful expansion of development, innovation, and production within the aeronautics industry during the 20th century was facilitated by collaboration of government agencies with the commercial aviation companies. One of the initial products conceived from the collaboration was the ANC-5 Bulletin, first published in 1937. The ANC-5 Bulletin had intended to standardize the requirements of various government agencies in the design of aircraft structure. The national space policy shift in priority for NASA with an emphasis on transferring the travel to low earth orbit to commercial space providers highlights an opportunity and a need for the national and global space industries. The same collaboration and standardization that is documented and maintained by the industry within MIL-HDBK-5 (MMPDS-01) and MIL-HBDK-17 (nonmetallic mechanical properties) can also be exploited to standardize the thermal performance properties, processing methods, test methods, and analytical methods for use in aircraft and spacecraft design and associated propulsion systems. In addition to the definition of thermal performance description and standardization, the standardization for test methods and analysis for extreme environments (high temperature, cryogenics, deep space radiation, etc) would also be highly valuable to the industry. Its subsequent revisions and conversion to MIL-HDBK-5 and then MMPDS-01 established and then expanded to contain standardized mechanical property design values and other related design information for metallic materials used in aircraft, missiles, and space vehicles. It also includes guidance on standardization of composition, processing, and analytical methods for presentation and inclusion into the handbook. This standardization enabled an expansion of the technologies to provide efficiency and reliability to the consumers. It can be established that many individual programs within the government agencies have been overcome with development costs generated from these nonstandard requirements. Without industry standardization and acceptance, the programs are driven to shoulder the costs of determining design requirements, performance criteria, and then material qualification and certification. A significant investment that the industry could make to both reduce individual program development costs and schedules while expanding commercial space flight capabilities would be to invest in standardizing material performance properties for high temperature, cryogenic, and deep space environments for both metallic and nonmetallic materials.

Updating OSHA standards based on national consensus standards. Direct final rule.

PubMed

2007-12-14

In this direct final rule, the Agency is removing several references to consensus standards that have requirements that duplicate, or are comparable to, other OSHA rules; this action includes correcting a paragraph citation in one of these OSHA rules. The Agency also is removing a reference to American Welding Society standard A3.0-1969 ("Terms and Definitions") in its general-industry welding standards. This rulemaking is a continuation of OSHA's ongoing effort to update references to consensus and industry standards used throughout its rules.

Technical Data Interoperability (TDI) Pathfinder Via Emerging Standards

NASA Technical Reports Server (NTRS)

Conroy, Mike; Gill, Paul; Hill, Bradley; Ibach, Brandon; Jones, Corey; Ungar, David; Barch, Jeffrey; Ingalls, John; Jacoby, Joseph; Manning, Josh;

76 FR 38590 - Proposed National Emission Standards for Hazardous Air Pollutants From Coal- and Oil-Fired...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-01

...- and Oil-Fired Electric Utility Steam Generating Units and Standards of Performance for Fossil-Fuel... Performance for Fossil-Fuel- Fired Electric Utility, Industrial-Commercial-Institutional, and Small Industrial...

Fact Sheet: Final Air Toxics Standards for Area Sources in the Chemical Manufacturing Industry

EPA Pesticide Factsheets

Fact sheet on the national air toxics standards issued October 16, 2009 by the Environmental Protection Agency (EPA) for smaller-emitting sources, known as area sources, in the chemical manufacturing industry.

Use of complementary and alternative medicine in Israel: 2000 vs. 1993.

PubMed

Shmueli, Amir; Shuval, Judith

2004-01-01

Complementary and alternative medical care has gained increasing popularity in western societies in recent years. To provide a cross-sectional and temporal (2000 vs. 1993) analysis of the use of complementary and alternative medicine in Israel. The subjects studied represented the Israeli Jewish urban population aged 45-75 years. Full sit-down interviews were conducted with 2,003 respondents in 1993 and 2,505 respondents in 2000. For 1993, 6% of the population reported on consultations with CAM providers during the previous year. For 2000, that proportion increased to 10%. Being a woman, having higher education, enjoying better economic status, being younger, living in a big city, and being dissatisfied with specialists' care were all positively related to the use of non-conventional medicine, particularly in 2000. In both years, more than 50% of the consultations were with acupuncturists and homeopaths. However, chiropractors have doubled their market shares, and lower back pain became the leading problem for which care was sought. The main reason for consulting CAM was a reluctance to use too many drugs or to undergo an invasive procedure. However, a significant proportion of the users continue to use conventional medicine concurrently. Seventy-five percent in 2000 and 60% in 1993 reported that the treatment helped. Between 1993 and 2000, CAM in Israel changed from an infant industry into a mainstream medical commodity, reflected in both prevalence and different patterns of consumption.

A review of the solar array manufacturing industry costing standards

NASA Technical Reports Server (NTRS)

1977-01-01

The solar array manufacturing industry costing standards model is designed to compare the cost of producing solar arrays using alternative manufacturing processes. Constructive criticism of the methodology used is intended to enhance its implementation as a practical design tool. Three main elements of the procedure include workbook format and presentation, theoretical model validity and standard financial parameters.

Industrial Education. Missouri's Show-Me Standards and Vocational Education Competencies Cross Reference. Main Report [and] Mini Report.

ERIC Educational Resources Information Center

Missouri Univ., Columbia. Instructional Materials Lab.

This publication consists of the main and mini reports for Missouri's Show-Me Standards and vocational education competencies for industrial education. This database documents the common ground between academic skills and vocational competencies. Both components of the Show-Me Standards--knowledge (content) and performance (process)--have been…

Status and Outlook of Metric Conversion of Standards: The Views of Nine Selected Major Standards Development Bodies.

DTIC Science & Technology

1982-05-01

insufficient need for a hard metric version of the ASME Boiler and Pressure Vessel Code and industry would not support the metric version. The Code Is not...aircraft industry is concerned with certification requirements in metric units. The inch-pound Boiler and Pressure Vessel Code is the current standard

Summative and Formative Evaluations, National Skill Standards Project. Prepared for the National Grocers Association.

ERIC Educational Resources Information Center

Hamm, Michael S.

In 1993-1996, the Grocers Research and Educational Foundation of the National Grocers Association developed entry-level skill standards for the food marketing industry. A coalition formed early in the project directed the skill standard development process and solicited input from major organizations involved in the industry. The validity of the…

76 FR 15607 - National Emission Standards for Hazardous Air Pollutants for Major Sources: Industrial...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-21

...On September 13, 2004, under authority of section 112 of the Clean Air Act, EPA promulgated national emission standards for hazardous air pollutants for new and existing industrial/commercial/ institutional boilers and process heaters. On June 19, 2007, the United States Court of Appeals for the District of Columbia Circuit vacated and remanded the standards. In response to the Court's vacatur and remand, EPA is, in this action, establishing emission standards that will require industrial/ commercial/institutional boilers and process heaters located at major sources to meet hazardous air pollutants standards reflecting the application of the maximum achievable control technology. This rule protects air quality and promotes public health by reducing emissions of the hazardous air pollutants listed in section 112(b)(1) of the Clean Air Act.

Complementary feeding at 4 versus 6 months of age for preterm infants born at less than 34 weeks of gestation: a randomised, open-label, multicentre trial.

PubMed

Gupta, Shuchita; Agarwal, Ramesh; Aggarwal, Kailash Chandra; Chellani, Harish; Duggal, Anil; Arya, Sugandha; Bhatia, Sunita; Sankar, Mari Jeeva; Sreenivas, Vishnubhatla; Jain, Vandana; Gupta, Arun Kumar; Deorari, Ashok K; Paul, Vinod K

2017-05-01

Evidence on the optimal time to initiation of complementary feeding in preterm infants is scarce. We examined the effect of initiation of complementary feeding at 4 months versus 6 months of corrected age on weight for age at 12 months corrected age in preterm infants less than 34 weeks of gestation. In this open-label, randomised trial, we enrolled infants born at less than 34 weeks of gestation with no major malformation from three public health facilities in India. Eligible infants were tracked from birth and randomly assigned (1:1) at 4 months corrected age to receive complementary feeding at 4 months corrected age (4 month group), or continuation of milk feeding and initiation of complementary feeding at 6 months corrected age (6 month group), using computer generated randomisation schedule of variable block size, stratified by gestation (30 weeks or less, and 31-33 weeks). Iron supplementation was provided as standard. Participants and the implementation team could not be masked to group assignment, but outcome assessors were masked. Primary outcome was weight for age Z-score at 12 months corrected age (WAZ 12 ) based on WHO Multicentre Growth Reference Study growth standards. Analyses were by intention to treat. The trial is registered with Clinical Trials Registry of India, number CTRI/2012/11/003149. Between March 20, 2013, and April 24, 2015, 403 infants were randomly assigned: 206 to receive complementary feeding from 4 months and 197 to receive complementary feeding from 6 months. 22 infants in the 4 month group (four deaths, two withdrawals, 16 lost to follow-up) and eight infants in the 6 month group (two deaths, six lost to follow-up) were excluded from analysis of primary outcome. There was no difference in WAZ 12 between two groups: -1·6 (SD 1·2) in the 4 month group versus -1·6 (SD 1·3) in the 6 month group (mean difference 0·005, 95% CI -0·24 to 0·25; p=0·965). There were more hospital admissions in the 4 month group compared with the 6 month group: 2·5 episodes per 100 infant-months in the 4 month group versus 1·4 episodes per 100 infant-months in the 6 month group (incidence rate ratio 1·8, 95% CI 1·0-3·1, p=0·03). 34 (18%) of 188 infants in the 4 month group required hospital admission, compared with 18 (9%) of 192 infants in the 6 month group. Although there was no evidence of effect for the primary endpoint of WAZ 12 , the higher rate of hospital admission in the 4 month group suggests a recommendation to initiate complementary feeding at 6 months over 4 months of corrected age in infants less than 34 weeks of gestation. Indian Council of Medical Research supported the study until Nov 14, 2015. Subsequently, Shuchita Gupta's salary was supported for 2 months by an institute fellowship from All India Institute Of Medical Sciences, and a grant by Wellcome Trust thereafter. Copyright © 2017 The Author(s). Published by Elsevier Ltd. This is an Open Access article under the CC BY license. Published by Elsevier Ltd.. All rights reserved.

Environmental and risk screening for prioritizing pollution prevention opportunities in the U.S. printed wiring board manufacturing industry.

PubMed

Lam, Carl W; Lim, Seong-Rin; Schoenung, Julie M

2011-05-15

Modern manufacturing of printed wiring boards (PWBs) involves extensive use of various hazardous chemicals in different manufacturing steps such as board preparation, circuit design transfer, etching and plating processes. Two complementary environmental screening methods developed by the U.S. EPA, namely: (i) the Tool for the Reduction and Assessment of Chemical and Other Environmental Impacts (TRACI) and (ii) Risk-Screening Environmental Indicators (RSEI), are used to quantify geographic and chemical environmental impacts in the U.S. PWB manufacturing industry based on Toxics Release Inventory (TRI) data. Although the release weight percentages of industrial chemicals such as methanol, glycol ethers and dimethylformamide comprise the larger fraction of reported air and water emissions, results indicate that lead, copper and their compounds' releases correspond to the highest environmental impact from toxicity potentials and risk-screening scores. Combining these results with further knowledge of PWB manufacturing, select alternative chemical processes and materials for pollution prevention are discussed. Examples of effective pollution prevention options in the PWB industry include spent etchant recovery technologies, and process and material substitutions. In addition, geographic assessment of environmental burden highlights states where promotion of pollution prevention strategies and emissions regulations can have the greatest effect to curb the PWB industry's toxic release impacts. Copyright © 2011 Elsevier B.V. All rights reserved.

Porn star/stripper/escort: economic and sexual dynamics in a sex work career.

PubMed

Escoffier, Jeffrey

2007-01-01

This article explores the career dynamics of performers in the gay male pornography industry, by focusing on a common career path- from porn star to stripper to escort. Between 1995 and 2005, most men performing in gay porn films, unlike contract actresses in the straight porn industry, have been unable to earn enough income to work exclusively as performers in front of the camera. The industry's constant search for new faces and fresh performers creates what sociologist Paul Cressey has called "the retrogressive dynamic": The longer a person works in a sexual occupation, the less one is paid, and the lower the status of the work venue. In the porn industry, one aspect of this process is referred to as "overexposure," during which the performer experiences a diminishing "fantasy potential" as fans lose erotic interest in the porn star who has appeared too frequently in too many movies. Performers attempt to confront the retrogressive dynamic by limiting the number of adult films in which they appear in a year, diversifying their sexual repertoire, or shifting into other roles within the industry (behind the camera, marketing, production, etc.). One common option is to pursue work in economically complementary forms of sex work such as stripping and escorting.

Views of health journalists, industry employees and news consumers about disclosure and regulation of industry-journalist relationships: an empirical ethical study.

PubMed

Lipworth, Wendy; Kerridge, Ian; Morrell, Bronwen; Forsyth, Rowena; Jordens, Christopher F C

2015-03-01

Bioethicists and policymakers are increasingly concerned about the effects on health journalism of relationships between journalists and private corporations. The concern is that relationships between journalists and manufacturers of medicines, medical devices, complementary medicines and food can and do distort health reporting. This is a problem because health news is known to have a major impact on the public's health-related expectations and behaviour. Commentators have proposed two related approaches to protecting the public from potential harms arising from industry-journalist interactions: greater transparency and external regulation. To date, few empirical studies have examined stakeholders' views of industry-journalist relationships and how these should be managed. We conducted interviews with 13 journalists and 12 industry employees, and 2 focus groups with consumers. Our findings, which are synthesised here, provide empirical support for the need for greater transparency and regulation of industry-journalist relationships. Our findings also highlight several likely barriers to instituting such measures, which will need to be overcome if transparency and regulation are to be accepted by stakeholders and have their intended effect on the quality of journalism and the actions of news consumers. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Proceedings of the DOD (Department of Defense) Standardization and Data Management Conference Supporting the Acquisition Process Held in Linthicum, Maryland on August 22-24, 1988

DTIC Science & Technology

1988-01-01

for this conference’s success goes to the panel chairmen and their panelists who gave generously of their time , effort, and talent, to the...Conference is the fourth in a series of bi-annual meetings convened to address timely issues affecting defense acquisition. Complementary goals are...the perspective on that issue has been clarified. o A lot of times we tend to look at acquisition, standardization, logistics, quality and other

Optimizing the European regulatory framework for sustainable bacteriophage therapy in human medicine.

PubMed

Verbeken, Gilbert; Pirnay, Jean-Paul; De Vos, Daniel; Jennes, Serge; Zizi, Martin; Lavigne, Rob; Casteels, Minne; Huys, Isabelle

2012-06-01

For practitioners at hospitals seeking to use natural (not genetically modified, as appearing in nature) bacteriophages for treatment of antibiotic-resistant bacterial infections (bacteriophage therapy), Europe's current regulatory framework for medicinal products hinders more than it facilitates. Although many experts consider bacteriophage therapy to be a promising complementary (or alternative) treatment to antibiotic therapy, no bacteriophage-specific framework for documentation exists to date. Decades worth of historical clinical data on bacteriophage therapy (from Eastern Europe, particularly Poland, and the former Soviet republics, particularly Georgia and Russia, as well as from today's 27 EU member states and the US) have not been taken into account by European regulators because these data have not been validated under current Western regulatory standards. Consequently, applicants carrying out standard clinical trials on bacteriophages in Europe are obliged to initiate clinical work from scratch. This paper argues for a reduced documentation threshold for Phase 1 clinical trials of bacteriophages and maintains that bacteriophages should not be categorized as classical medicinal products for at least two reasons: (1) such a categorization is scientifically inappropriate for this specific therapy and (2) such a categorization limits the marketing authorization process to industry, the only stakeholder with sufficient financial resources to prepare a complete dossier for the competent authorities. This paper reflects on the current regulatory framework for medicines in Europe and assesses possible regulatory pathways for the (re-)introduction of bacteriophage therapy in a way that maintains its effectiveness and safety as well as its inherent characteristics of sustainability and in situ self-amplification and limitation.

Approximations to the Truth: Comparing Survey and Microsimulation Approaches to Measuring Income for Social Indicators

ERIC Educational Resources Information Center

Figari, Francesco; Iacovou, Maria; Skew, Alexandra J.; Sutherland, Holly

2012-01-01

In this paper, we evaluate income distributions in four European countries (Austria, Italy, Spain and Hungary) using two complementary approaches: a standard approach based on reported incomes in survey data, and a microsimulation approach, where taxes and benefits are simulated. These two approaches may be expected to generate slightly different…

Complementary Social Sciences Courses in the Alberta High School Curriculum: A Conceptual Review

ERIC Educational Resources Information Center

Staszenski, Donna; Smits, Hans

2008-01-01

In keeping with Alberta Education's goals and responsibilities to develop and evaluate curriculum and to set standards and assess outcomes, the Ministry is reviewing the status and purpose of social sciences courses as part of the high school curriculum. The present social sciences curriculum was revised in 1985. As part of the social sciences…

Principled Neglect and Compliance: Responses to NCLB and the CCSS at an Expeditionary Learning Middle School

ERIC Educational Resources Information Center

Stern, Rebecca

2016-01-01

This qualitative study explored educators' sense making of and responses to No Child Left Behind and the Common Core State Standards at one urban Expeditionary Learning middle school. Sense-making theory (Spillane, Reiser, & Reimer, 2002) and inquiry as stance (Cochran-Smith & Lytle, 2009) were used as complementary conceptual frameworks…

Agricultural Handling and Processing Industries; Data Pertinent to an Evaluation of Overtime Exemptions Available under the Fair Labor Standards Act. Volume I.

ERIC Educational Resources Information Center

Wage and Labor Standards Administration (DOL), Washington, DC.

This report covers the major agricultural handling and processing industries qualifying for partial overtime exemption under the Fair Labor Standards Act and evaluates the need for such exemptions. Questionnaires which were sent to firms in various processing industries provide data on nearly 4,000 processors. The results show that existing…

Designing testing service at baristand industri Medan’s liquid waste laboratory

NASA Astrophysics Data System (ADS)

Kusumawaty, Dewi; Napitupulu, Humala L.; Sembiring, Meilita T.

2018-03-01

Baristand Industri Medan is a technical implementation unit under the Industrial and Research and Development Agency, the Ministry of Industry. One of the services often used in Baristand Industri Medan is liquid waste testing service. The company set the standard of service is nine working days for testing services. At 2015, 89.66% on testing services liquid waste does not meet the specified standard of services company because of many samples accumulated. The purpose of this research is designing online services to schedule the coming the liquid waste sample. The method used is designing an information system that consists of model design, output design, input design, database design and technology design. The results of designing information system of testing liquid waste online consist of three pages are pages to the customer, the recipient samples and laboratory. From the simulation results with scheduled samples, then the standard services a minimum of nine working days can be reached.

Exploring the biological activity of condensed tannins and nutritional value of tree and shrub leaves from native species of the Argentinean Dry Chaco.

PubMed

García, Elisa M; Cherry, Nicole; Lambert, Barry D; Muir, James P; Nazareno, Mónica A; Arroquy, Jose I

2017-11-01

Tropical tree or shrub leaves are an important source of nutrients for ruminants and a potential source of biologically active compounds that may affect ruminal metabolism of nutrients. Therefore, eight woody species from the native flora of Argentinean Dry Chaco, rich in secondary compounds such as condensed tannins (CT), were assessed for their nutritional value, CT fractions and in vitro true digestibility of dry matter, as well as biological activity (BA). Differences among species were found in contents of total phenol, protein-precipitating phenols (PPP), bound proteins to PPP (BP) and BP/PPP (P < 0.0001). The BP/PPP ratio reveals differences among species in potential BA as indicated by protein precipitation. The major CT of each species were isolated and purified for use as a standard. Although Schinopsis balansae had the most (P ≤ 0.05) total CT (19.59% DM), Caesalpinia paraguariensis had greater (P ≤ 0.05) BA with the most PPP (530.21% dry matter). Larrea divaricata, at 0.97, followed by Acacia aroma, at 0.89, had CT with the highest (P ≤ 0.05) BP/PPP ratios, followed by Prosopis alba (0.59). There were differences in nutritive value and bioactivity among species. Those with the greatest CT were not necessarily those with the most BA. Caesalpinia paraguariensis, S. balansae and L. divaricata were the most promising species as native forage CT sources. Cercidiurm praecox (20.87% CP; 18.14% acid detergent fiber) and Prosopis nigra (19.00% CP; 27.96% acid detergent fiber) showed the best (P ≤ 0.05) nutritive values. According to their nutritive traits, these species might be complementary in grass-based ruminant diets. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

Environmental protection, the economy, and jobs: national and regional analyses.

PubMed

Bezdek, Roger H; Wendling, Robert M; Diperna, Paula

2008-01-01

The relationship between environmental protection (EP), the economy, and jobs has been an issue of harsh contention for decades. Does EP harm the economy and destroy jobs or facilitate economic growth and create jobs? We address this issue by summarizing the results of the Jobs and the Environment Initiative, research funded by nonprofit foundations to quantify the relationship between EP, the economy, and jobs. We estimate the size of the US environmental industry and the numbers of environment-related jobs at the national level and in the states of Florida, Michigan, Minnesota, North Carolina, Ohio, and Wisconsin. This is the first time that such comprehensive, detailed estimates have been developed. Our major finding is that, contrary to conventional wisdom, EP, economic growth, and jobs creation are complementary and compatible: investments in EP create jobs and displace jobs, but the net effect on employment is positive. Second, environment protection has grown rapidly to become a major sales-generating, job-creating industry--$300 billion/year and 5 million jobs in 2003. Third, most of the 5 million jobs created are standard jobs for accountants, engineers, computer analysts, clerks, factory workers, etc., and the classic environmental job (environmental engineer, ecologist, etc.) constitutes only a small portion of the jobs created. Most of the persons employed in the jobs created may not even realize that they owe their livelihood to protecting the environment. Fourth, at the state level, the relationship between environmental policies and economic/job growth is positive, not negative. States can have strong economies and simultaneously protect the environment. Finally, environmental jobs are concentrated in manufacturing and professional, information, scientific, and technical services, and are thus disproportionately the types of jobs all states seek to attract.

Assessment of Lithium-based Battery Electrolytes Developed under the NASA PERS Program

NASA Technical Reports Server (NTRS)

Bennett, William R.; Baldwin, Richard S.

2006-01-01

Recently, NASA formally completed the Polymer Energy Rechargeable System (PERS) Program, which was established in 2000 in collaboration with the Air Force Research Laboratory (AFRL) to support the development of polymer-based, lithium-based cell chemistries and battery technologies to address the next generation of aerospace applications and mission needs. The goal of this program was to ultimately develop an advanced, space-qualified battery technology, which embodied a solid polymer electrolyte (SPE) and complementary components, with improved performance characteristics that would address future aerospace battery requirements. Programmatically, the PERS initiative exploited both interagency collaborations to address common technology and engineering issues and the active participation of academia and private industry. The initial program phases focused on R&D activities to address the critical technical issues and challenges at the cell level. A variety of cell and polymeric electrolyte concepts were pursued as part of the development efforts undertaken at numerous governmental, industrial and academic laboratories. Numerous candidate electrolyte materials were developed, synthesized and optimized for evaluation. Utilizing the component screening facility and the "standardized" test procedures developed at the NASA Glenn Research Center, electrochemical screening and performance evaluations of promising candidate materials were completed. This overview summarizes test results for a variety of candidate electrolyte materials that were developed under the PERS Program. Electrolyte properties are contrasted and compared to the original project goals, and the strengths and weaknesses of the electrolyte chemistries are discussed. Limited cycling data for full-cells using lithium metal and vanadium oxide electrodes are also presented. Based on measured electrolyte properties, the projected performance characteristics and temperature limitations of batteries utilizing the advanced electrolytes and components have been estimated. Limitations for the achievement of practical performance levels are also discussed, as well as needs for future research and development.

Remarkable recoveries: research and practice from a patient's perspective.

PubMed

Barasch, Marc Ian

2008-08-01

Mind-body therapies are often portrayed in the literature as self-palliative, adjunctive, and complementary, but rarely as contributive to cure. Many physicians continue to view them as acceptable indulgences so long as they are harmless and the patient remains fully compliant with a standard treatment regimen. The possibility that such modalities might help drive the healing process itself is infrequently acknowledged. This article addresses the topic of such therapies, examining remarkable recoveries in cancer, and suggesting the need for a "Remarkable Recovery Registry" to expand the literature on these cases. The author discusses the importance of complementary alternative medicine, and emotional and pyschologic support in the treatment regimen, and the need for health care providers and patients to work together to provide the best emotional environment for the healing process.

Renyi entropy measures of heart rate Gaussianity.

PubMed

Lake, Douglas E

2006-01-01

Sample entropy and approximate entropy are measures that have been successfully utilized to study the deterministic dynamics of heart rate (HR). A complementary stochastic point of view and a heuristic argument using the Central Limit Theorem suggests that the Gaussianity of HR is a complementary measure of the physiological complexity of the underlying signal transduction processes. Renyi entropy (or q-entropy) is a widely used measure of Gaussianity in many applications. Particularly important members of this family are differential (or Shannon) entropy (q = 1) and quadratic entropy (q = 2). We introduce the concepts of differential and conditional Renyi entropy rate and, in conjunction with Burg's theorem, develop a measure of the Gaussianity of a linear random process. Robust algorithms for estimating these quantities are presented along with estimates of their standard errors.

[Toxicity evaluation of sewage treatment plant effluent of chemical industrial park along the Yangtze River on rat testicular germ cells in vitro].

PubMed

Hu, Guan-Jiu; Wang, Xiao-Yi; Shi, Wei; Bai, Chou-Yong; Wu, Jiang; Liu, Hong-Ling; Yu, Hong-Xia

2009-05-15

By using rat testicular germ cells in vitro toxicity testing method based on original cells culture, the reproduction toxicity of sewage treatment plant effluent of Chemical Industrial Park along the Yangtze River was evaluated, through cells changes in morphologic, activity and viability parameters. The results showed that both of the effluents from new developed Chemical Industrial Park A and provincial Chemical Industrial Park B contain reproductive toxic substances. The toxicity of Park A has more significant undergone changes in cells activity of sertoli cells (p < 0.01), spermatogenic cells (p < 0.05) and leyding cells (p < 0.05), lactate dehydrogenase activity (p < 0.01) and testosterone secretion (p < 0.01) than that of Park B. Sepermatogenic cells are more sensitive in indicating reproduction toxicity for testicular, compared with leyding cells and sertoli cells. This study demonstrated that, as an indispensable and complementary tool for water quality assessment, rat testicular germ cells in vitro toxicity testing based on original cells culture can be used to comprehensively evaluate the reproduction toxicity of sewage treatment plant effluent, and provide prompt and useful discharge quality information.

Introduction to the history and current status of evidence-based korean medicine: a unique integrated system of allopathic and holistic medicine.

PubMed

Yin, Chang Shik; Ko, Seong-Gyu

2014-01-01

Objectives. Korean medicine, an integrated allopathic and traditional medicine, has developed unique characteristics and has been active in contributing to evidence-based medicine. Recent developments in Korean medicine have not been as well disseminated as traditional Chinese medicine. This introduction to recent developments in Korean medicine will draw attention to, and facilitate, the advancement of evidence-based complementary alternative medicine (CAM). Methods and Results. The history of and recent developments in Korean medicine as evidence-based medicine are explored through discussions on the development of a national standard classification of diseases and study reports, ranging from basic research to newly developed clinical therapies. A national standard classification of diseases has been developed and revised serially into an integrated classification of Western allopathic and traditional holistic medicine disease entities. Standard disease classifications offer a starting point for the reliable gathering of evidence and provide a representative example of the unique status of evidence-based Korean medicine as an integration of Western allopathic medicine and traditional holistic medicine. Conclusions. Recent developments in evidence-based Korean medicine show a unique development in evidence-based medicine, adopting both Western allopathic and holistic traditional medicine. It is expected that Korean medicine will continue to be an important contributor to evidence-based medicine, encompassing conventional and complementary approaches.

Testing the reliability of standard and complementary DNA barcodes for the monocot subfamily Alooideae from South Africa.

PubMed

Daru, Barnabas H; van der Bank, Michelle; Bello, Abubakar; Yessoufou, Kowiyou

2017-04-01

Although a standard DNA barcode has been identified for plants, it does not always provide species-level specimen identifications for investigating important ecological questions. In this study, we assessed the species-level discriminatory power of standard (rbcLa + matK) and complementary barcodes (ITS1 and trnH-psbA) within the subfamily Alooideae (Asphodelaceae), a large and recent plant radiation, whose species are important in horticulture yet are threatened. Alooideae has its centre of endemism in southern Africa, with some outlier species occurring elsewhere in Africa and Madagascar. We sampled 360 specimens representing 235 species within all 11 genera of the subfamily. With three distance-based methods, all markers performed poorly for our combined data set, with the highest proportion of correct species-level specimen identifications (30%) found for ITS1. However, when performance was assessed across genera, the discriminatory power varied from 0% for all single markers and combinations in Gasteria to 63% in Haworthiopsis, again for ITS1, suggesting that DNA barcoding success may be related to the evolutionary history of the lineage considered. Although ITS1 could be a good barcode for Haworthiopsis, the generally poor performance of all markers suggests that Alooideae remains a challenge. As species boundaries within Alooideae remain controversial, we call for continued search for suitable markers or the use of genomics approaches to further explore species discrimination in the group.

The Empirical Relationship between Mining Industry Development and Environmental Pollution in China.

PubMed

Li, Gerui; Lei, Yalin; Ge, Jianping; Wu, Sanmang

2017-03-02

This study uses a vector autoregression (VAR) model to analyze changes in pollutants among different mining industries and related policy in China from 2001 to 2014. The results show that: (1) because the pertinence of standards for mining waste water and waste gas emissions are not strong and because the maximum permissible discharge pollutant concentrations in these standards are too high, ammonia nitrogen and industrial sulfur dioxide discharges increased in most mining industries; (2) chemical oxygen demand was taken as an indicator of sewage treatment in environmental protection plans; hence, the chemical oxygen demand discharge decreased in all mining industries; (3) tax reduction policies, which are only implemented in coal mining and washing and extraction of petroleum and natural gas, decreased the industrial solid waste discharge in these two mining industries.

40 CFR 432.1 - General Applicability.

Code of Federal Regulations, 2011 CFR

2011-07-01

... STANDARDS MEAT AND POULTRY PRODUCTS POINT SOURCE CATEGORY § 432.1 General Applicability. As defined more... the following industrial classification codes: Standard industrial classification 1 North Americanindustrial classification system 2 SIC 0751 NAICS 311611. SIC 2011 NAICS 311612. SIC 2013 NAICS 311615. SIC...

Design and industrial production of frequency standards in the USSR

NASA Technical Reports Server (NTRS)

Demidov, Nikolai A.; Uljanov, Adolph A.

1990-01-01

Some aspects of research development and production of quantum frequency standards, carried out in QUARTZ Research and Production Association (RPA), Gorky, U.S.S.R., were investigated for the last 25 to 30 years. During this period a number of rubidium and hydrogen frequency standards, based on the active maser, were developed and put into production. The first industrial model of a passive hydrogen maser was designed in the last years. Besides frequency standards for a wide application range, RPA QUARTZ investigates metrological frequency standards--cesium standards with cavity length 1.9 m and hydrogen masers with a flexible storage bulb.

Standards in capstone design courses and the engineering curriculum.

PubMed

Goldberg, Jay

2012-01-01

In 1990, I was the group leader of Research and Development for Surgitek, a urological device manufacturer in Racine, Wisconsin, which was the market leader in ureteral stents. I recognized the need for an industry standard for ureteral stents, felt that taking a leadership role in the development of a new standard would be a good professional development activity, and volunteered to serve as the chair of the American Society for Testing and Materials (ASTM, now known as ASTM International) Task Group on Ureteral Stents. After several years, the standard was approved, and I continue to serve as the chair of the ASTM Subcommittee on Urological Materials and Devices. This experience helped me understand the value of industry standards, expanded my professional network and visibility within the medical device industry, and helped develop my leadership skills.

Development of a space universal modular architecture (SUMO)

NASA Astrophysics Data System (ADS)

Collins, Bernie F.

This concept paper proposes that the space community should develop and implement a universal standard for spacecraft modularity - to improve interoperability of spacecraft components. Pursuing a global industry consensus standard for open and modular spacecraft architecture will encourage trade, remove standards-related market barriers, and in the long run increase both value provided to customers and profitability of the space industrial sector. This concept paper sets out: (1) the goals for a SUMO standard and how it will benefit the space community; (2) background on spacecraft modularity and existing related standards; (3) the proposed technical scope of the current standardization effort; and (4) an approach for creating a SUMO standard.

On Business-Driven IT Security Management and Mismatches between Security Requirements in Firms, Industry Standards and Research Work

NASA Astrophysics Data System (ADS)

Frühwirth, Christian

Industry managers have long recognized the vital importance of information security for their businesses, but at the same time they perceived security as a technology-driven rather then a business-driven field. Today, this notion is changing and security management is shifting from technology- to business-oriented approaches. Whereas there is evidence of this shift in the literature, this paper argues that security standards and academic work have not yet taken it fully into account. We examine whether this disconnect has lead to a misalignment of IT security requirements in businesses versus industry standards and academic research. We conducted 13 interviews with practitioners from 9 different firms to investigate this question. The results present evidence for a significant gap between security requirements in industry standards and actually reported security vulnerabilities. We further find mismatches between the prioritization of security factors in businesses, standards and real-world threats. We conclude that security in companies serves the business need of protecting information availability to keep the business running at all times.

The context of ethics in the health care industry.

PubMed

Wells, B; Spinks, N

1996-01-01

Examines ethics in the health care industry from the perspectives of investors, employees, patients, competitors and the environment. Ethical behaviour in the health care industry is essential and desirable; however, determining which behavioural actions are ethical and which are unethical is difficult. Although never will everyone agree on specific ethical standards, everyone should agree that setting ethical standards is vital. Therefore, administrators of health care institutions and health care providers should work together to establish codes of ethics which define boundaries for ethical behaviours in the health care industry.

Differentiation of organic and non-organic winter wheat cultivars from a controlled field trial by crystallization patterns.

PubMed

Kahl, Johannes; Busscher, Nicolaas; Mergardt, Gaby; Mäder, Paul; Torp, Torfinn; Ploeger, Angelika

2015-01-01

There is a need for authentication tools in order to verify the existing certification system. Recently, markers for analytical authentication of organic products were evaluated. Herein, crystallization with additives was described as an interesting fingerprint approach which needs further evidence, based on a standardized method and well-documented sample origin. The fingerprint of wheat cultivars from a controlled field trial is generated from structure analysis variables of crystal patterns. Method performance was tested on factors such as crystallization chamber, day of experiment and region of interest of the patterns. Two different organic treatments and two different treatments of the non-organic regime can be grouped together in each of three consecutive seasons. When the k-nearest-neighbor classification method was applied, approximately 84% of Runal samples and 95% of Titlis samples were classified correctly into organic and non-organic origin using cross-validation. Crystallization with additive offers an interesting complementary fingerprint method for organic wheat samples. When the method is applied to winter wheat from the DOK trial, organic and non-organic treated samples can be differentiated significantly based on pattern recognition. Therefore crystallization with additives seems to be a promising tool in organic wheat authentication. © 2014 Society of Chemical Industry.

Scalable Nanostructured Carbon Electrode Arrays for Enhanced Dopamine Detection.

PubMed

Demuru, Silvia; Nela, Luca; Marchack, Nathan; Holmes, Steven J; Farmer, Damon B; Tulevski, George S; Lin, Qinghuang; Deligianni, Hariklia

2018-04-27

Dopamine is a neurotransmitter that modulates arousal and motivation in humans and animals. It plays a central role in the brain "reward" system. Its dysregulation is involved in several debilitating disorders such as addiction, depression, Parkinson's disease, and schizophrenia. Dopamine neurotransmission and its reuptake in extracellular space takes place with millisecond temporal and nanometer spatial resolution. Novel nanoscale electrodes are needed with superior sensitivity and improved spatial resolution to gain an improved understanding of dopamine dysregulation. We report on a scalable fabrication of dopamine neurochemical probes of a nanostructured glassy carbon that is smaller than any existing dopamine sensor and arrays of more than 6000 nanorod probes. We also report on the electrochemical dopamine sensing of the glassy carbon nanorod electrode. Compared with a carbon fiber, the nanostructured glassy carbon nanorods provide about 2× higher sensitivity per unit area for dopamine sensing and more than 5× higher signal per unit area at low concentration of dopamine, with comparable LOD and time response. These glassy carbon nanorods were fabricated by pyrolysis of a lithographically defined polymeric nanostructure with an industry standard semiconductor fabrication infrastructure. The scalable fabrication strategy offers the potential to integrate these nanoscale carbon rods with an integrated circuit control system and with other complementary metal oxide semiconductor (CMOS) compatible sensors.

An integrated approach to develop, validate and operate thermo-physiological human simulator for the development of protective clothing.

PubMed

Psikuta, Agnes; Koelblen, Barbara; Mert, Emel; Fontana, Piero; Annaheim, Simon

2017-12-07

Following the growing interest in the further development of manikins to simulate human thermal behaviour more adequately, thermo-physiological human simulators have been developed by coupling a thermal sweating manikin with a thermo-physiology model. Despite their availability and obvious advantages, the number of studies involving these devices is only marginal, which plausibly results from the high complexity of the development and evaluation process and need of multi-disciplinary expertise. The aim of this paper is to present an integrated approach to develop, validate and operate such devices including technical challenges and limitations of thermo-physiological human simulators, their application and measurement protocol, strategy for setting test scenarios, and the comparison to standard methods and human studies including details which have not been published so far. A physical manikin controlled by a human thermoregulation model overcame the limitations of mathematical clothing models and provided a complementary method to investigate thermal interactions between the human body, protective clothing, and its environment. The opportunities of these devices include not only realistic assessment of protective clothing assemblies and equipment but also potential application in many research fields ranging from biometeorology, automotive industry, environmental engineering, and urban climate to clinical and safety applications.

An integrated approach to develop, validate and operate thermo-physiological human simulator for the development of protective clothing

PubMed Central

PSIKUTA, Agnes; KOELBLEN, Barbara; MERT, Emel; FONTANA, Piero; ANNAHEIM, Simon

2017-01-01

Following the growing interest in the further development of manikins to simulate human thermal behaviour more adequately, thermo-physiological human simulators have been developed by coupling a thermal sweating manikin with a thermo-physiology model. Despite their availability and obvious advantages, the number of studies involving these devices is only marginal, which plausibly results from the high complexity of the development and evaluation process and need of multi-disciplinary expertise. The aim of this paper is to present an integrated approach to develop, validate and operate such devices including technical challenges and limitations of thermo-physiological human simulators, their application and measurement protocol, strategy for setting test scenarios, and the comparison to standard methods and human studies including details which have not been published so far. A physical manikin controlled by a human thermoregulation model overcame the limitations of mathematical clothing models and provided a complementary method to investigate thermal interactions between the human body, protective clothing, and its environment. The opportunities of these devices include not only realistic assessment of protective clothing assemblies and equipment but also potential application in many research fields ranging from biometeorology, automotive industry, environmental engineering, and urban climate to clinical and safety applications. PMID:28966294

Every document and picture tells a story: using internal corporate document reviews, semiotics, and content analysis to assess tobacco advertising

PubMed Central

Anderson, S J; Dewhirst, T; Ling, P M

2006-01-01

In this article we present communication theory as a conceptual framework for conducting documents research on tobacco advertising strategies, and we discuss two methods for analysing advertisements: semiotics and content analysis. We provide concrete examples of how we have used tobacco industry documents archives and tobacco advertisement collections iteratively in our research to yield a synergistic analysis of these two complementary data sources. Tobacco promotion researchers should consider adopting these theoretical and methodological approaches. PMID:16728758

AMIE Delivers Innovation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sawyer, Karma; Green, Johney; Jackson, Roderick

ORNL and many industry partners developed the Additive Manufacturing Integrated Energy (AMIE) demonstration to address electricity supply and reliability challenges via an integrated approach to power generation, storage, and use. AMIE demonstrates rapid innovation through additive manufacturing (3D printing) to connect a natural gas-powered hybrid electric vehicle to a high-performance building that produces, consumes, and stores renewable energy. To offset power supply disruptions, the vehicle’s engine can provide complementary power to the building. Fitted with an advanced power control system and then scaled up, this concept can support electricity needs worldwide.

AMIE Delivers Innovation

ScienceCinema

Sawyer, Karma; Green, Johney; Jackson, Roderick; Love, Lonnie

2018-01-16

ORNL and many industry partners developed the Additive Manufacturing Integrated Energy (AMIE) demonstration to address electricity supply and reliability challenges via an integrated approach to power generation, storage, and use. AMIE demonstrates rapid innovation through additive manufacturing (3D printing) to connect a natural gas-powered hybrid electric vehicle to a high-performance building that produces, consumes, and stores renewable energy. To offset power supply disruptions, the vehicle’s engine can provide complementary power to the building. Fitted with an advanced power control system and then scaled up, this concept can support electricity needs worldwide.

Participative versus assigned production standard setting in a repetitive industrial task: a strategy for improving worker productivity.

PubMed

Das, B; Shikdar, A A

1999-01-01

The participative standard with feedback condition was superior to the assigned difficult (140% of normal) standard with feedback condition in terms of worker productivity. The percentage increase in worker productivity with the participative standard and feedback condition was 46%, whereas the increase in the assigned difficult standard with feedback was 23%, compared to the control group (no standard, no feedback). Worker productivity also improved significantly as a result of assigning a normal (100%) production standard with feedback, compared to the control group, and the increase was 12%. The participative standard with feedback condition emerges as the optimum strategy for improving worker productivity in a repetitive industrial production task.

Bridging the gap in complementary and alternative medicine research: manualization as a means of promoting standardization and flexibility of treatment in clinical trials of acupuncture.

PubMed

Schnyer, Rosa N; Allen, John J B

2002-10-01

An important methodological challenge encountered in acupuncture clinical research involves the design of treatment protocols that help ensure standardization and replicability while allowing for the necessary flexibility to tailor treatments to each individual. Manualization of protocols used in clinical trials of acupuncture and other traditionally-based complementary and alternative medicine (CAM) systems facilitates the systematic delivery of replicable and standardized, yet individually-tailored treatments. To facilitate high-quality CAM acupuncture research by outlining a method for the systematic design and implementation of protocols used in CAM clinical trials based on the concept of treatment manualization. A series of treatment manuals was developed to systematically articulate the Chinese medical theoretical and clinical framework for a given Western-defined illness, to increase the quality and consistency of treatment, and to standardize the technical aspects of the protocol. In all, three manuals were developed for National Institutes of Health (NIH)-funded clinical trials of acupuncture for depression, spasticity in cerebral palsy, and repetitive stress injury. In Part I, the rationale underlying these manuals and the challenges encountered in creating them are discussed, and qualitative assessments of their utility are provided. In Part II, a methodology to develop treatment manuals for use in clinical trials is detailed, and examples are given. A treatment manual provides a precise way to train and supervise practitioners, enable evaluation of conformity and competence, facilitate the training process, and increase the ability to identify the active therapeutic ingredients in clinical trials of acupuncture.

Ethical review of human experimentation in the consumer products industry.

PubMed

Steadman, J H

1998-04-01

Ethical review of human experimentation in the consumer products industry is important and provides instructive parallels and contrasts with clinical medical research. The procedures used in Unilever NV/plc are described. A central body sets standards for and monitors compliance with ethical review of human studies throughout Unilever. Guidance has been produced on many topics including issues applying generally to human experimentation and more specifically to the consumer products sector. Deficiencies and inconsistencies in the procedures for ethical review and the care of subjects during the conduct of studies have been identified and corrected. Appropriate uniform standards have been achieved across all Unilever operations. All human experimentation in the industry needs adequate ethical review. Although the methods used by individual companies may differ, procedures must ensure uniform high standards across a global industry.

20 °C—A Short History of the Standard Reference Temperature for Industrial Dimensional Measurements

PubMed Central

Doiron, Ted

2007-01-01

One of the basic principles of dimensional metrology is that a part dimension changes with temperature because of thermal expansion. Since 1931 industrial lengths have been defined as the size at 20 °C. This paper discusses the variety of standard temperatures that were in use before that date, the efforts of C.E. Johansson to meet these variations, and the effort by the National Bureau of Standards to bring the United States to the eventual world standard. PMID:27110451

Assessment of Salient Beliefs Affecting Mothers' Intention to Adherence to Dietary Diversity in their Children's Complementary Feeding.

PubMed

Karimi-Shahanjarini, Akram; Rahmani, Fatemeh; Roshanei, Ghodratollah; Mahdi Hazavehei, Seyyed M

2017-01-01

Providing a variety of foods has been emphasized as one of the most important features of optimal complementary feeding. This study investigated key beliefs that guide mothers' intention to adherence to dietary diversity in their 1-2-year-old children's complementary feeding. This was a cross-sectional study involving 290 mothers (mean age = 27, standard deviation = 5.32) with child 1-2-year-old attending maternal and child health section of health centers in Rasht, Iran. To represent the socioeconomic status of the participants, 6 centers out of 15 were selected from three different socioeconomic areas (low-, middle-, and high-income areas). Mothers completed a questionnaire assessing intention and belief-based items of theory of planned behavior. Correlations and multiple regression analyses were performed. The mean age of mothers was 27 ± 5.33 (27-43 years). Regression analyses revealed that among behavioral beliefs, the perception that adherence to dietary diversity would lead to improve children's growth was the significant predictor of intention (β = 0.13, P = 0.04). Regarding normative beliefs, perceived social pressure from health-care professionals to adherence to dietary diversity significantly predicted intention (β = 0.15, P = 0.01). Among control beliefs, the perception that daily pressures made difficult adherence to dietary diversity was the key determinant (β = 0.19, P = 0.01). Findings of this study represent the important beliefs that can be addressed in development planning aimed at modifying mothers' child complementary feeding practices.

Complementary physical therapies for movement disorders in Parkinson's disease: a systematic review.

PubMed

Alves Da Rocha, P; McClelland, J; Morris, M E

2015-12-01

The growth and popularity of complementary physical therapies for Parkinson's disease (PD) attempt to fill the gap left by conventional exercises, which does not always directly target wellbeing, enjoyment and social participation. To evaluate the effects of complementary physical therapies on motor performance, quality of life and falls in people living with PD. Systematic review with meta-analysis. Outpatients--adults diagnosed with idiopathic PD, male or female, modified Hoehn and Yahr scale I-IV, any duration of PD, any duration of physical treatment or exercise. Randomized controlled trials, non-randomized controlled trials and case series studies were identified by systematic searching of health and rehabilitation electronic databases. A standardized form was used to extract key data from studies by two independent researchers. 1210 participants from 20 randomized controlled trials, two non-randomized controlled trials and 13 case series studies were included. Most studies had moderately strong methodological quality. Dancing, water exercises and robotic gait training were an effective adjunct to medical management for some people living with PD. Virtual reality training, mental practice, aerobic training, boxing and Nordic walking training had a small amount of evidence supporting their use in PD. On balance, alternative physical therapies are worthy of consideration when selecting treatment options for people with this common chronic disease. Complementary physical therapies such as dancing, hydrotherapy and robotic gait training appear to afford therapeutic benefits, increasing mobility and quality of life, in some people living with PD.

Recruiting and retaining family caregivers to a randomized controlled trial on mindfulness-based stress reduction.

PubMed

Whitebird, Robin R; Kreitzer, Mary Jo; Lewis, Beth A; Hanson, Leah R; Crain, A Lauren; Enstad, Chris J; Mehta, Adele

2011-09-01

Caregivers for a family member with dementia experience chronic long-term stress that may benefit from new complementary therapies such as mindfulness-based stress reduction. Little is known however, about the challenges of recruiting and retaining family caregivers to research on mind-body based complementary therapies. Our pilot study is the first of its kind to successfully recruit caregivers for a family member with dementia to a randomized controlled pilot study of mindfulness-based stress reduction. The study used an array of recruitment strategies and techniques that were tailored to fit the unique features of our recruitment sources and employed retention strategies that placed high value on establishing early and ongoing communication with potential participants. Innovative recruitment methods including conducting outreach to health plan members and generating press coverage were combined with standard methods of community outreach and paid advertising. We were successful in exceeding our recruitment goal and retained 92% of the study participants at post-intervention (2 months) and 90% at 6 months. Recruitment and retention for family caregiver interventions employing mind-body based complementary therapies can be successful despite many challenges. Barriers include cultural perceptions about the use and benefit of complementary therapies, cultural differences with how the role of family caregiver is perceived, the use of group-based designs requiring significant time commitment by participants, and travel and respite care needs for busy family caregivers. Copyright © 2011 Elsevier Inc. All rights reserved.

Wobbly strings: calculating the capture rate of a webcam using the rolling shutter effect in a guitar

NASA Astrophysics Data System (ADS)

Cunnah, David

2014-07-01

In this paper I propose a method of calculating the time between line captures in a standard complementary metal-oxide-semiconductor (CMOS) webcam using the rolling shutter effect when filming a guitar. The exercise links the concepts of wavelength and frequency, while outlining the basic operation of a CMOS camera through vertical line capture.

Wobbly Strings: Calculating the Capture Rate of a Webcam Using the Rolling Shutter Effect in a Guitar

ERIC Educational Resources Information Center

Cunnah, David

2014-01-01

In this paper I propose a method of calculating the time between line captures in a standard complementary metal-oxide-semiconductor (CMOS) webcam using the rolling shutter effect when filming a guitar. The exercise links the concepts of wavelength and frequency, while outlining the basic operation of a CMOS camera through vertical line capture.

Efficient transfer of information from hexitol nucleic acids to RNA during nonenzymatic oligomerization

NASA Technical Reports Server (NTRS)

Kozlov, I. A.; De Bouvere, B.; Van Aerschot, A.; Herdewijn, P.; Orgel, L. E.

1999-01-01

Hexitol nucleic acids (HNAs) are DNA analogues that contain the standard nucleoside bases attached to a phosphorylated 1,5-anhydrohexitol backbone. We find that HNAs support efficient information transfer in nonensymatic template-directed reactions. HNA heterosequences appeared to be superior to the corresponding DNA heterosequences in facilitating synthesis of complementary oligonucleotides from nucleoside-5'-phosphoro-2-methyl imidazolides.

Analysis of Industry Responses to Federal Regulations in Safety Requirements for New Automobiles

DOT National Transportation Integrated Search

1978-03-01

This report presents findings of an initial study of how the automobile industry has responded to the promulgation of motor vehicle standards by the U.S. goverment. The report examines three safety standards as evaluative cases: MVS 203--Steering col...

Industrial Education. Vocational Education Program Courses Standards.

ERIC Educational Resources Information Center

Florida State Dept. of Education, Tallahassee. Div. of Applied Tech., Adult, and Community Education.

This document contains vocational education program course standards for exploratory courses, practical arts courses, and job preparatory programs offered at the secondary and postsecondary level as part of the industrial education component in Florida. Curriculum frameworks are provided for 144 programs/clusters; representative topics are as…

The Empirical Relationship between Mining Industry Development and Environmental Pollution in China

PubMed Central

Li, Gerui; Lei, Yalin; Ge, Jianping; Wu, Sanmang

2017-01-01

This study uses a vector autoregression (VAR) model to analyze changes in pollutants among different mining industries and related policy in China from 2001 to 2014. The results show that: (1) because the pertinence of standards for mining waste water and waste gas emissions are not strong and because the maximum permissible discharge pollutant concentrations in these standards are too high, ammonia nitrogen and industrial sulfur dioxide discharges increased in most mining industries; (2) chemical oxygen demand was taken as an indicator of sewage treatment in environmental protection plans; hence, the chemical oxygen demand discharge decreased in all mining industries; (3) tax reduction policies, which are only implemented in coal mining and washing and extraction of petroleum and natural gas, decreased the industrial solid waste discharge in these two mining industries. PMID:28257126

Standardization of left atrial, right ventricular, and right atrial deformation imaging using two-dimensional speckle tracking echocardiography: a consensus document of the EACVI/ASE/Industry Task Force to standardize deformation imaging.

PubMed

Badano, Luigi P; Kolias, Theodore J; Muraru, Denisa; Abraham, Theodore P; Aurigemma, Gerard; Edvardsen, Thor; D'Hooge, Jan; Donal, Erwan; Fraser, Alan G; Marwick, Thomas; Mertens, Luc; Popescu, Bogdan A; Sengupta, Partho P; Lancellotti, Patrizio; Thomas, James D; Voigt, Jens-Uwe

2018-03-27

The EACVI/ASE/Industry Task Force to standardize deformation imaging prepared this consensus document to standardize definitions and techniques for using two-dimensional (2D) speckle tracking echocardiography (STE) to assess left atrial, right ventricular, and right atrial myocardial deformation. This document is intended for both the technical engineering community and the clinical community at large to provide guidance on selecting the functional parameters to measure and how to measure them using 2D STE.This document aims to represent a significant step forward in the collaboration between the scientific societies and the industry since technical specifications of the software packages designed to post-process echocardiographic datasets have been agreed and shared before their actual development. Hopefully, this will lead to more clinically oriented software packages which will be better tailored to clinical needs and will allow industry to save time and resources in their development.

Regulatory Barriers Blocking Standardization of Interoperability

PubMed Central

Zhong, Daidi; Kirwan, Michael J

2013-01-01

Developing and implementing a set of personal health device interoperability standards is key to cultivating a healthy global industry ecosystem. The standardization organizations, including the Institute of Electrical and Electronics Engineers 11073 Personal Health Device Workgroup (IEEE 11073-PHD WG) and Continua Health Alliance, are striving for this purpose. However, factors like the medial device regulation, health policy, and market reality have placed non-technical barriers over the adoption of technical standards throughout the industry. These barriers have significantly impaired the motivations of consumer device vendors who desire to enter the personal health market and the overall success of personal health industry ecosystem. In this paper, we present the affect that these barriers have placed on the health ecosystem. This requires immediate action from policy makers and other stakeholders. The current regulatory policy needs to be updated to reflect the reality and demand of consumer health industry. Our hope is that this paper will draw wide consensus amongst its readers, policy makers, and other stakeholders. PMID:25098204

Regulatory barriers blocking standardization of interoperability.

PubMed

Zhong, Daidi; Kirwan, Michael J; Duan, Xiaolian

2013-07-12

Developing and implementing a set of personal health device interoperability standards is key to cultivating a healthy global industry ecosystem. The standardization organizations, including the Institute of Electrical and Electronics Engineers 11073 Personal Health Device Workgroup (IEEE 11073-PHD WG) and Continua Health Alliance, are striving for this purpose. However, factors like the medial device regulation, health policy, and market reality have placed non-technical barriers over the adoption of technical standards throughout the industry. These barriers have significantly impaired the motivations of consumer device vendors who desire to enter the personal health market and the overall success of personal health industry ecosystem. In this paper, we present the affect that these barriers have placed on the health ecosystem. This requires immediate action from policy makers and other stakeholders. The current regulatory policy needs to be updated to reflect the reality and demand of consumer health industry. Our hope is that this paper will draw wide consensus amongst its readers, policy makers, and other stakeholders.

5 CFR 532.309 - Determining adequacy of specialized private industry.

Code of Federal Regulations, 2012 CFR

2012-01-01

... private industry. 532.309 Section 532.309 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT CIVIL... Determining adequacy of specialized private industry. (a) Specialized private industry comparable to an appropriated fund dominant industry is adequate when: (1) The survey area is one of the 25 largest Standard...

5 CFR 532.309 - Determining adequacy of specialized private industry.

Code of Federal Regulations, 2011 CFR

2011-01-01

... private industry. 532.309 Section 532.309 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT CIVIL... Determining adequacy of specialized private industry. (a) Specialized private industry comparable to an appropriated fund dominant industry is adequate when: (1) The survey area is one of the 25 largest Standard...

5 CFR 532.309 - Determining adequacy of specialized private industry.

Code of Federal Regulations, 2014 CFR

2014-01-01

... private industry. 532.309 Section 532.309 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT CIVIL... Determining adequacy of specialized private industry. (a) Specialized private industry comparable to an appropriated fund dominant industry is adequate when: (1) The survey area is one of the 25 largest Standard...

5 CFR 532.309 - Determining adequacy of specialized private industry.

Code of Federal Regulations, 2013 CFR

2013-01-01

... private industry. 532.309 Section 532.309 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT CIVIL... Determining adequacy of specialized private industry. (a) Specialized private industry comparable to an appropriated fund dominant industry is adequate when: (1) The survey area is one of the 25 largest Standard...

The Use of Healing Touch in Integrative Oncology

PubMed Central

Hart, Laura K.; Freel, Mildred I.; Haylock, Pam J.; Lutgendorf, Susan K.

2013-01-01

The use of complementary therapies by cancer patients has become so prevalent that nurses working in oncology are finding it necessary to understand these therapies and the evidence-based support for their use. The integrative use of the biofield therapy Healing Touch (HT) in conjunction with the chemoradiation received by patients with cervical cancer (stages 1B1 to IVA) during a recent research study is described. Findings indicated effects of HT on the immune response and on depression, in contrast to patients receiving relaxation or standard care. Specifically, HT patients demonstrated a minimal decrease in natural killer cell cytotoxicity (NKCC) over the course of treatment whereas NKCC of patients receiving relaxation therapy (RT) and standard care (SC) declined sharply during radiation (p = 0.018). HT patients also showed significant decreases in depressed mood compared to RT and SC (p < 0.05). These findings, as well as the energetic effects of chemoradiation that were observed, and the proposed mechanisms and potential contributions of biofield therapy are addressed. It is suggested that the appropriate integration of complementary modalities into oncology care has the potential to enhance the impact of conventional care by putting the patient in the best condition to use their innate healing resources. PMID:21951738

Competing with big business: a randomised experiment testing the effects of messages to promote alcohol and sugary drink control policy.

PubMed

Scully, Maree; Brennan, Emily; Durkin, Sarah; Dixon, Helen; Wakefield, Melanie; Barry, Colleen L; Niederdeppe, Jeff

2017-12-28

Evidence-based policies encouraging healthy behaviours are often strongly opposed by well-funded industry groups. As public support is crucial for policy change, public health advocates need to be equipped with strategies to offset the impact of anti-policy messages. In this study, we aimed to investigate the effectiveness of theory-based public health advocacy messages in generating public support for sugary drink/alcohol policies (increased taxes; sport sponsorship bans) and improving resistance to subsequent anti-policy messages typical of the sugary drink/alcohol industry. We conducted a two-wave randomised online experiment assigning Australian adults to one of four health policies (sugary drink tax; sugary drink industry sports sponsorship ban; alcohol tax; alcohol industry sports sponsorship ban). Within each health policy, we randomised participants to one of five message conditions: (i) non-advocacy based message about the size and seriousness of the relevant health issue (control); (ii) standard pro-policy arguments alone; (iii) standard pro-policy arguments combined with an inoculation message (forewarning and directly refuting anti-policy arguments from the opposition); (iv) standard pro-policy arguments combined with a narrative message (a short, personal story about an individual's experience of the health issue); or (v) standard pro-policy arguments combined with a composite inoculation and narrative message. At time 1, we exposed participants (n = 6000) to their randomly assigned message. Around two weeks later, we re-contacted participants (n = 3285) and exposed them to an anti-policy message described as being from a representative of the sugary drink/alcohol industry. Generalised linear models tested for differences between conditions in policy support and anti-industry beliefs at both time points. Only the standard argument plus narrative message increased policy support relative to control at time 1. The standard argument plus narrative and standard argument plus inoculation messages were effective at increasing resistance to the persuasive impact of anti-policy messages relative to control at time 2. Dissemination of advocacy messages using inoculation or narrative components can help strengthen public resistance to subsequent anti-policy messages from industry groups.

INDUSTRIAL POLLUTION PREVENTION OPPORTUNITIES FOR THE 1990S

EPA Science Inventory

A set of criteria was developed for the purpose of subjectively prioritizing industry segments for their pollution prevention potential and their opportunity for improvement. Using this set of criteria, high priority industries were selected from a Standard Industry Classificatio...

Policy suggestions to carry out the research on the standards of greenhouse gas emission allowances in key industries

NASA Astrophysics Data System (ADS)

Chen, Liang; Liu, Mei; Zong, Jianfang; Guo, Huiting; Sun, Liang

2018-05-01

On the basis of summarizing and combing the functions and effects of the long-term implementation of the serial standards on the limitation of energy consumption per unit product in China, this paper focuses on the analysis of the practical demands of the green house gas emission allowances for key industrial enterprises, and puts forward the suggestions on the formulation of relevant standards. The differences and connections between the present standards of the energy consumption per unit product and future standards of greenhouse gas emission allowances in the key industries are discussed. The proposal is provided to the administrations with helpful guidelines and promotes enterprises to establish the clearer GHG emission reduction strategies and to reduce their greenhouse gas emissions. These suggestions will provide guarantee for realizing the target of reducing greenhouse gas emissions in China.

Use of Alternative and Complementary Medicine in Patients with Malignant Diseases in High-Volume Cancer Center and Future Aspects

PubMed

Kust, Davor; Šamija, Ivan; Marić-Brozić, Jasmina; Svetec, Branka; Miletić, Marija; Mamić, Gordana; Bolanča, Ante; Kusić, Zvonko; Fröbe, Ana

2016-12-01

Usage of complementary and alternative medicine (CAM) is steadily increasing over the last decades, gaining medical, economic and sociological importance. The aim of the present study was to assess the use of complementary and alternative therapies in cancer patients. A cross-sectional, descriptive survey design was used to collect data through an anonymous questionnaire. A total of 267 patients were included in the study. The prevalence of CAM use among cancer patients in this study was 60.3%. It was found that 61 heterogeneous CAM therapies were used, the most popular among patients being naturopathy/folk medicine. In multivariate logistic regression analysis, independent predictors of CAM use were high income, divorced status, female sex and younger age. In conclusion, considering the fact that a large proportion of patients used at least one CAM approach, we need to continue our efforts to improve the patient-oncologist communication in order to deliver most reliable information to patients and to better understand the possible standard medicine-CAM interactions. According to results of the latest studies, CAM therapies that help manage pain, nausea, fatigue, anxiety, and other symptoms should be integrated into the patient overall care.

Colour preferences and colour vision in poultry chicks.

PubMed

Ham, A D; Osorio, D

2007-08-22

The dramatic colours of biological communication signals raise questions about how animals perceive suprathreshold colour differences, and there are long-standing questions about colour preferences and colour categorization by non-human species. This study investigates preferences of foraging poultry chicks (Gallus gallus) as they peck at coloured objects. Work on colour recognition often deals with responses to monochromatic lights and how animals divide the spectrum. We used complementary colours, where the intermediate is grey, and related the chicks' choices to three models of the factors that may affect the attractiveness. Two models assume that attractiveness is determined by a metric based on the colour discrimination threshold either (i) by chromatic contrast against the background or (ii) relative to an internal standard. An alternative third model is that categorization is important. We tested newly hatched and 9-day-old chicks with four pairs of (avian) complementary colours, which were orange, blue, red and green for humans. Chromatic contrast was more relevant to newly hatched chicks than to 9-day-old birds, but in neither case could contrast alone account for preferences; especially for orange over blue. For older chicks, there is evidence for categorization of complementary colours, with a boundary at grey.

Regulatory trends in the battery industry

NASA Astrophysics Data System (ADS)

McColl, K. G.

1994-02-01

The scope of regulations in the battery industry is extensive and also complex. In the future, regulations will become more demanding and will encompass issues not currently considered. Increased focus on environmental issues by government bodies, environmental groups, local communities will result in more strict compliance standards. The USA is currently leading the world's battery industries in the scope and compliance level of regulations. By studying trends in the USA, the rest of the battery industry can prepare itself for the future operating environment. This paper reviews the most critical areas of air pollution, blood-lead levels and recycling. The paper concludes that the battery industry must adopt a culture of exceeding current compliance standards.

Effectiveness of integrating individualized and generic complementary medicine treatments with standard care versus standard care alone for reducing preoperative anxiety.

PubMed

Attias, Samuel; Keinan Boker, Lital; Arnon, Zahi; Ben-Arye, Eran; Bar'am, Ayala; Sroka, Gideon; Matter, Ibrahim; Somri, Mostafa; Schiff, Elad

2016-03-01

Preoperative anxiety is commonly reported by people undergoing surgery. A significant number of studies have found a correlation between preoperative anxiety and post-operative morbidity. Various methods of complementary and alternative medicine (CAM) were found to be effective in alleviating preoperative anxiety. This study examined the relative effectiveness of various individual and generic CAM methods combined with standard treatment (ST) in relieving preoperative anxiety, in comparison with ST alone. Randomized controlled trial. Holding room area Three hundred sixty patients. Patients were randomly divided into 6 equal-sized groups. Group 1 received the standard treatment (ST) for anxiety alleviation with anxiolytics. The five other groups received the following, together with ST (anxiolytics): Compact Disk Recording of Guided Imagery (CDRGI); acupuncture; individual guided imagery; reflexology; and individual guided imagery combined with reflexology, based on medical staff availability. Assessment of anxiety was taken upon entering the holding room area (surgery preparation room) ('pre-treatment assessment'), and following the treatment, shortly before transfer to the operating room ('post-treatment assessment'), based on the Visual Analogue Scale (VAS) questionnaire. Data processing included comparison of VAS averages in the 'pre' and 'post' stages among the various groups. Preoperatively, CAM treatments were associated with significant reduction of anxiety level (5.54-2.32, p<0.0001). In contrast, no significant change was noted in the standard treatment group (4.92-5.44, p=0.15). Individualized CAM treatments did not differ significantly in outcomes. However, CDRGI was less effective than individualized CAM (P<0.001), but better than ST (p=0.005). Individual CAM treatments integrated within ST reduce preoperative anxiety significantly, compared to standard treatment alone, and are more effective than generic CDRGI. In light of the scope of preoperative anxiety and its implications for public health, integration of CAM therapies with ST should be considered for reducing preoperative anxiety. Copyright © 2016 Elsevier Inc. All rights reserved.

78 FR 54197 - Energy Efficiency Program for Commercial and Industrial Equipment: Energy Conservation Standards...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-03

.... EERE-2013-BT-STD-0030] RIN 1904-AD01 Energy Efficiency Program for Commercial and Industrial Equipment... Certain Industrial Equipment,'' a program covering certain commercial and industrial equipment (hereafter... (AEMTCA), Public Law 112-210 (Dec. 18, 2012). EPCA covers many types of commercial and industrial...

78 FR 48765 - Petition for Waiver of Compliance

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-09

... safety appliance arrangements on modern railcar types not explicitly covered by 49 CFR Part 231. The Task... all car types, plus industry safety appliance standards for specific car types. These industry... arrangements for individual car types. AAR also included deviation tables that show where the AAR standard...

76 FR 3587 - Standards of Performance for Fossil-Fuel-Fired, Electric Utility, Industrial-Commercial...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-20

... Standards of Performance for Fossil-Fuel-Fired, Electric Utility, Industrial-Commercial-Institutional, and... Fossil fuel-fired electric utility steam generating units. Federal Government 22112 Fossil fuel-fired... 22112 Fossil fuel-fired electric utility steam generating units owned by municipalities. 921150 Fossil...

Standardized Curriculum for General Industrial Maintenance Trades.

ERIC Educational Resources Information Center

Mississippi State Dept. of Education, Jackson. Office of Vocational, Technical and Adult Education.

Standardized vocational education course titles and core contents for two courses in Mississippi are provided: general industrial maintenance trades I and II. The first course contains the following units: (1) orientation and leadership activities; (2) safety; (3) blueprint reading; (4) oxyacetylene cutting; (5) preventative maintenance; (6)…

Synthetic Organic Chemical Manufacturing Industry: Organic National Emission Standards for Hazardous Air Pollutants (NESHAP) - 40 CFR 63 Subparts F,G,H,I

EPA Pesticide Factsheets

Read about the National Emission Standards for Hazardous Air Pollutants (NESHAP) for the Synthetic Organic Chemical Manufacturing Industry. Read the rules, find the CFR text, dockets, effective dates, rule history and compliance information.

Naval Research Laboratory Industrial Chemical Analysis and Respiratory Filter Standards Development

DTIC Science & Technology

2017-09-29

Filter Standards Development September 29, 2017 Approved for public release; distribution is unlimited. Thomas E. suTTo Materials and Systems Branch...LIMITATION OF ABSTRACT Naval Research Laboratory Industrial Chemical Analysis and Respiratory Filter Standards Development Thomas E. Sutto Naval Research...approach, developed by NRL, is tested by examining the filter behavior against a number of chemicals to determine if the NRL approach resulted in the

Environmental assessment for the proposed effluent limitations guidelines, pretreatment standards, and new source performance standards for the centralized waste treatment industry

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1998-12-01

This report assesses the water quality related benefits that would be expected if the US Environmental Protection Agency (EPA) adopts the proposed effluent limitations, guidelines and pretreatment standards for the Centralized Waste Treatment (CWT) Industry. EPA estimates that under baseline conditions 205 CWT facilities discharge approximately 5.22 million lbs/year of metal and organic pollutants.

Bioactive peptides released by in vitro digestion of standard and hydrolyzed infant formulas.

PubMed

Wada, Yasuaki; Lönnerdal, Bo

2015-11-01

Hydrolyzed infant formulas serve as appropriate nutritional sources for infants afflicted with cow's milk allergy, and milk proteins in hydrolyzed formulas are industrially hydrolyzed extensively or partially. To investigate whether industrial hydrolysis may modulate the digestive trajectory of milk proteins, thereby releasing different profiles of bioactive peptides compared with standard formulas, both standard and hydrolyzed formulas were subjected to in vitro digestion and formation of bioactive peptides were compared. One standard, one extensively hydrolyzed, and one partially hydrolyzed infant formula were digested in vitro with pepsin and pancreatin, taking into account the higher gastric pH of infants, and the digesta were subjected to peptidomic analysis. The standard formula released a larger variety of bioactive peptides than from the hydrolyzed formulas, indicating that industrial hydrolysis of milk proteins may generally attenuate their indigenous bioactivities such as antibacterial, immuno-regulatory, and anti-oxidative activities. Conversely, industrial hydrolysis may facilitate the formation of bioactive peptides from hydrophobic proteins/regions such as β-LG and the "strategic zone" of β-CN, which encrypt bioactive peptides including a dipeptidyl dipeptidase-4-inhibitory, hypocholesterolemic, and opioid peptides. Infants fed hydrolyzed infant formulas may be influenced by milk protein-derived bioactive peptides in a manner different from those fed standard formula. Copyright © 2015 Elsevier Inc. All rights reserved.

The food industry and self-regulation: standards to promote success and to avoid public health failures.

PubMed

Sharma, Lisa L; Teret, Stephen P; Brownell, Kelly D

2010-02-01

Threatened by possible government regulation and critical public opinion, industries often undertake self-regulatory actions, issue statements of concern for public welfare, and assert that self-regulation is sufficient to protect the public. The food industry has made highly visible pledges to curtail children's food marketing, sell fewer unhealthy products in schools, and label foods in responsible ways. Ceding regulation to industry carries opportunities but is highly risky. In some industries (e.g., tobacco), self-regulation has been an abject failure, but in others (e.g., forestry and marine fisheries), it has been more successful. We examined food industry self-regulation in the context of other self-regulatory successes and failures and defined 8 standards that should be met if self-regulation is to be effective.

Transparent collaboration between industry and academia can serve unmet patient need and contribute to reproductive public health

PubMed Central

D'Hooghe, Thomas

2017-01-01

Abstract The pharmaceutical and device industry has greatly contributed to diagnostic and therapeutic approaches in reproductive medicine in a very highly regulated environment, ensuring that development and manufacturing follow the highest standards. In spite of these achievements, collaboration between industry and physicians/academia is often presented in a negative context. However, today more than ever, partnership between industry and academia is needed to shorten the timeline between innovation and application, and to achieve faster access to better diagnostics, drugs and devices for the benefit of patients and society, based on complementary knowledge, skills and expertise. Such partnerships can include joined preclinical/clinical and post-marketing research and development, joint intellectual property, and joint revenue. In Europe, the transparency of this collaboration between pharmaceutical industry and medical doctors has been made possible by the Compliance and Disclosure Policy published by the European Federation of Pharmaceutical Industries and Associations (EFPIA), which represents the major pharmaceutical companies operating in Europe, and includes as members some but not all companies active in infertility and women's health. Under the EFPIA Disclosure Code of conduct, companies need to disclose transfers of value including amounts, activity type and the names of the recipient Health Care Professionals and Organizations. EFPIA member companies have also implemented very strict internal quality control processes and procedures in the design, statistical analysis, reporting, publication and communication of clinical research, according to Good Clinical Practice and other regulations, and are regularly inspected by competent authorities such as the US Food and Drug Administration (FDA) or European Medicines Agency (EMA) for all trials used in marketing authorization applications. The risk of scientific bias exists not only in the pharmaceutical industry but also in the academic world. When academics believe in a hypothesis, they may build their case by emphasizing the arguments supporting their case, and either refute, refuse, oppose or ignore arguments that challenge their assumptions. A possible solution to reduce this bias is international consensus on study design, data collection, statistical analysis and reporting of outcomes, especially in the area of personalized reproductive medicine, e.g. to demonstrate superiority or non-inferiority of personalized ovarian stimulation using biomarkers. Equally important is that declarations of interest are reported transparently and completely in scientific abstracts and publications, and that ghost authorship is replaced by proactive and clear co-authorship for experts from industry where such co-authorship is required based on the prevailing ICMJE criteria. In that context, however, reviewers should stop believing that publications by industry authors only, or by mixed groups of co-authors from industry and academia, are more prone to bias than papers from academic groups only. Instead, the scientific quality of the work should be the only relevant criterion for acceptance of papers or abstracts, regardless of the environment where the work was done. In the end, neutrality does not exist and different beliefs and biases exist within and between healthcare professionals and organizations and pharmaceutical industries. The challenge is to be transparent about this reality at all times, and to behave in an informed, balanced and ethical way as medical and scientific experts, taking into account compliance and legal regulations of both industry and academic employers, in the best interest of patients and society. PMID:28854594

Transparent collaboration between industry and academia can serve unmet patient need and contribute to reproductive public health.

PubMed

D'Hooghe, Thomas

2017-08-01

The pharmaceutical and device industry has greatly contributed to diagnostic and therapeutic approaches in reproductive medicine in a very highly regulated environment, ensuring that development and manufacturing follow the highest standards. In spite of these achievements, collaboration between industry and physicians/academia is often presented in a negative context. However, today more than ever, partnership between industry and academia is needed to shorten the timeline between innovation and application, and to achieve faster access to better diagnostics, drugs and devices for the benefit of patients and society, based on complementary knowledge, skills and expertise. Such partnerships can include joined preclinical/clinical and post-marketing research and development, joint intellectual property, and joint revenue. In Europe, the transparency of this collaboration between pharmaceutical industry and medical doctors has been made possible by the Compliance and Disclosure Policy published by the European Federation of Pharmaceutical Industries and Associations (EFPIA), which represents the major pharmaceutical companies operating in Europe, and includes as members some but not all companies active in infertility and women's health. Under the EFPIA Disclosure Code of conduct, companies need to disclose transfers of value including amounts, activity type and the names of the recipient Health Care Professionals and Organizations. EFPIA member companies have also implemented very strict internal quality control processes and procedures in the design, statistical analysis, reporting, publication and communication of clinical research, according to Good Clinical Practice and other regulations, and are regularly inspected by competent authorities such as the US Food and Drug Administration (FDA) or European Medicines Agency (EMA) for all trials used in marketing authorization applications. The risk of scientific bias exists not only in the pharmaceutical industry but also in the academic world. When academics believe in a hypothesis, they may build their case by emphasizing the arguments supporting their case, and either refute, refuse, oppose or ignore arguments that challenge their assumptions. A possible solution to reduce this bias is international consensus on study design, data collection, statistical analysis and reporting of outcomes, especially in the area of personalized reproductive medicine, e.g. to demonstrate superiority or non-inferiority of personalized ovarian stimulation using biomarkers. Equally important is that declarations of interest are reported transparently and completely in scientific abstracts and publications, and that ghost authorship is replaced by proactive and clear co-authorship for experts from industry where such co-authorship is required based on the prevailing ICMJE criteria. In that context, however, reviewers should stop believing that publications by industry authors only, or by mixed groups of co-authors from industry and academia, are more prone to bias than papers from academic groups only. Instead, the scientific quality of the work should be the only relevant criterion for acceptance of papers or abstracts, regardless of the environment where the work was done. In the end, neutrality does not exist and different beliefs and biases exist within and between healthcare professionals and organizations and pharmaceutical industries. The challenge is to be transparent about this reality at all times, and to behave in an informed, balanced and ethical way as medical and scientific experts, taking into account compliance and legal regulations of both industry and academic employers, in the best interest of patients and society. © The Author 2017. Published by Oxford University Press on behalf of the European Society of Human Reproduction and Embryology.

Image sensor pixel with on-chip high extinction ratio polarizer based on 65-nm standard CMOS technology.

PubMed

Sasagawa, Kiyotaka; Shishido, Sanshiro; Ando, Keisuke; Matsuoka, Hitoshi; Noda, Toshihiko; Tokuda, Takashi; Kakiuchi, Kiyomi; Ohta, Jun

2013-05-06

In this study, we demonstrate a polarization sensitive pixel for a complementary metal-oxide-semiconductor (CMOS) image sensor based on 65-nm standard CMOS technology. Using such a deep-submicron CMOS technology, it is possible to design fine metal patterns smaller than the wavelengths of visible light by using a metal wire layer. We designed and fabricated a metal wire grid polarizer on a 20 × 20 μm(2) pixel for image sensor. An extinction ratio of 19.7 dB was observed at a wavelength 750 nm.

A Simplified Approach to Risk Assessment Based on System Dynamics: An Industrial Case Study.

PubMed

Garbolino, Emmanuel; Chery, Jean-Pierre; Guarnieri, Franck

2016-01-01

Seveso plants are complex sociotechnical systems, which makes it appropriate to support any risk assessment with a model of the system. However, more often than not, this step is only partially addressed, simplified, or avoided in safety reports. At the same time, investigations have shown that the complexity of industrial systems is frequently a factor in accidents, due to interactions between their technical, human, and organizational dimensions. In order to handle both this complexity and changes in the system over time, this article proposes an original and simplified qualitative risk evaluation method based on the system dynamics theory developed by Forrester in the early 1960s. The methodology supports the development of a dynamic risk assessment framework dedicated to industrial activities. It consists of 10 complementary steps grouped into two main activities: system dynamics modeling of the sociotechnical system and risk analysis. This system dynamics risk analysis is applied to a case study of a chemical plant and provides a way to assess the technological and organizational components of safety. © 2016 Society for Risk Analysis.

The effect of body bias of the metal-oxide-semiconductor field-effect transistor in the resistive network on spatial current distribution in a bio-inspired complementary metal-oxide-semiconductor vision chip

NASA Astrophysics Data System (ADS)

Kong, Jae-Sung; Hyun, Hyo-Young; Seo, Sang-Ho; Shin, Jang-Kyoo

2008-11-01

Complementary metal-oxide-semiconductor (CMOS) vision chips for edge detection based on a resistive circuit have recently been developed. These chips help in the creation of neuromorphic systems of a compact size, high speed of operation, and low power dissipation. The output of the vision chip depends predominantly upon the electrical characteristics of the resistive network which consists of a resistive circuit. In this paper, the body effect of the metal-oxide-semiconductor field-effect transistor for current distribution in a resistive circuit is discussed with a simple model. In order to evaluate the model, two 160 × 120 CMOS vision chips have been fabricated using a standard CMOS technology. The experimental results nicely match our prediction.

Complementary and alternative medicine for post-traumatic stress disorder symptoms: A systematic review

PubMed Central

Wahbeh, Helané; Senders, Angela; Neuendorf, Rachel; Cayton, Julien

2014-01-01

Objectives To 1) characterize complementary and alternative medicine (CAM) studies for posttraumatic stress disorder symptoms (PTSD), 2) evaluate the quality of these studies, and 3) systematically grade the scientific evidence for individual CAM modalities for PTSD. Design Systematic Review. Eight data sources were searched. Selection criteria included any study design assessing PTSD outcomes and any CAM intervention. The body of evidence for each modality was assessed with the Natural Standard evidence-based, validated grading rationale.™ Results and Conclusions Thirty-three studies (n=1329) were reviewed. Scientific evidence of benefit for PTSD was Strong for repetitive transcranial magnetic stimulation and Good for acupuncture, hypnotherapy, meditation, and visualization. Evidence was Unclear or Conflicting for biofeedback, relaxation, Emotional Freedom and Thought Field therapies, yoga, and natural products. Considerations for clinical applications and future research recommendations are discussed. PMID:24676593

Beyond simple small-angle X-ray scattering: developments in online complementary techniques and sample environments.

PubMed

Bras, Wim; Koizumi, Satoshi; Terrill, Nicholas J

2014-11-01

Small- and wide-angle X-ray scattering (SAXS, WAXS) are standard tools in materials research. The simultaneous measurement of SAXS and WAXS data in time-resolved studies has gained popularity due to the complementary information obtained. Furthermore, the combination of these data with non X-ray based techniques, via either simultaneous or independent measurements, has advanced understanding of the driving forces that lead to the structures and morphologies of materials, which in turn give rise to their properties. The simultaneous measurement of different data regimes and types, using either X-rays or neutrons, and the desire to control parameters that initiate and control structural changes have led to greater demands on sample environments. Examples of developments in technique combinations and sample environment design are discussed, together with a brief speculation about promising future developments.

Beyond simple small-angle X-ray scattering: developments in online complementary techniques and sample environments

PubMed Central

Bras, Wim; Koizumi, Satoshi; Terrill, Nicholas J

2014-01-01

Small- and wide-angle X-ray scattering (SAXS, WAXS) are standard tools in materials research. The simultaneous measurement of SAXS and WAXS data in time-resolved studies has gained popularity due to the complementary information obtained. Furthermore, the combination of these data with non X-ray based techniques, via either simultaneous or independent measurements, has advanced understanding of the driving forces that lead to the structures and morphologies of materials, which in turn give rise to their properties. The simultaneous measurement of different data regimes and types, using either X-rays or neutrons, and the desire to control parameters that initiate and control structural changes have led to greater demands on sample environments. Examples of developments in technique combinations and sample environment design are discussed, together with a brief speculation about promising future developments. PMID:25485128

Effect of standards on new equipment design by new international standards and industry restraints

NASA Astrophysics Data System (ADS)

Endelman, Lincoln L.

1991-01-01

The use of international standards to further trade is one of the objectives of creating a standard. By having form fit and function compatible the free interchange of manufactured goods can be handled without hindrance. Unfortunately by setting up standards that are peculiar to a particular country or district it is possible to exclude competition from a group of manufacturers. A major effort is now underway to develop international laser standards. In the May I 990 issue of Laser Focus World Donald R. Johnson the director of industrial technology services for the National Institute of Standards and Technology (NIST formerly the National Bureau of Standards) is quoted as follows: " The common means of protectionism has been through certification for the market place. " The article goes on to say " Mr. Johnson expects this tradition to continue and that the new European Community (EC) will demand not just safety standards but performance standards as well. . . . the American laser industry must move very quickly on this issue or risk being left behind the European standards bandwagon. " The article continues laser companies must get involved in the actual standards negotiating process if they are to have a say in future policy. A single set of standards would reduce the need to repeatedly recalibrate products for different national markets. " As a member of ISO TC-72 SC9 I am

Fast pesticide detection inside microfluidic device with integrated optical pH, oxygen sensors and algal fluorescence.

PubMed

Tahirbegi, Islam Bogachan; Ehgartner, Josef; Sulzer, Philipp; Zieger, Silvia; Kasjanow, Alice; Paradiso, Mirco; Strobl, Martin; Bouwes, Dominique; Mayr, Torsten

2017-02-15

The necessities of developing fast, portable, cheap and easy to handle pesticide detection platforms are getting attention of scientific and industrial communities. Although there are some approaches to develop microchip based pesticide detection platforms, there is no compact microfluidic device for the complementary, fast, cheap, reusable and reliable analysis of different pesticides. In this work, a microfluidic device is developed for in-situ analysis of pesticide concentration detected via metabolism/photosynthesis of Chlamydomonas reinhardtii algal cells (algae) in tap water. Algae are grown in glass based microfluidic chip, which contains integrated optical pH and oxygen sensors in a portable system for on-site detection. In addition, intrinsic algal fluorescence is detected to analyze the pesticide concentration in parallel to pH and oxygen sensors with integrated fluorescence detectors. The response of the algae under the effect of different concentrations of pesticides is evaluated and complementary inhibition effects depending on the pesticide concentration are demonstrated. The three different sensors allow the determination of various pesticide concentrations in the nanomolar concentration range. The miniaturized system provides the fast quantification of pesticides in less than 10min and enables the study of toxic effects of different pesticides on Chlamydomonas reinhardtii green algae. Consequently, the microfluidic device described here provides fast and complementary detection of different pesticides with algae in a novel glass based microfluidic device with integrated optical pH, oxygen sensors and algal fluorescence. Copyright © 2016 Elsevier B.V. All rights reserved.

The Energy Industry Profile of ISO/DIS 19115-1: Facilitating Discovery and Evaluation of, and Access to Distributed Information Resources

NASA Astrophysics Data System (ADS)

Hills, S. J.; Richard, S. M.; Doniger, A.; Danko, D. M.; Derenthal, L.; Energistics Metadata Work Group

2011-12-01

A diverse group of organizations representative of the international community involved in disciplines relevant to the upstream petroleum industry, - energy companies, - suppliers and publishers of information to the energy industry, - vendors of software applications used by the industry, - partner government and academic organizations, has engaged in the Energy Industry Metadata Standards Initiative. This Initiative envisions the use of standard metadata within the community to enable significant improvements in the efficiency with which users discover, evaluate, and access distributed information resources. The metadata standard needed to realize this vision is the initiative's primary deliverable. In addition to developing the metadata standard, the initiative is promoting its adoption to accelerate realization of the vision, and publishing metadata exemplars conformant with the standard. Implementation of the standard by community members, in the form of published metadata which document the information resources each organization manages, will allow use of tools requiring consistent metadata for efficient discovery and evaluation of, and access to, information resources. While metadata are expected to be widely accessible, access to associated information resources may be more constrained. The initiative is being conducting by Energistics' Metadata Work Group, in collaboration with the USGIN Project. Energistics is a global standards group in the oil and natural gas industry. The Work Group determined early in the initiative, based on input solicited from 40+ organizations and on an assessment of existing metadata standards, to develop the target metadata standard as a profile of a revised version of ISO 19115, formally the "Energy Industry Profile of ISO/DIS 19115-1 v1.0" (EIP). The Work Group is participating on the ISO/TC 211 project team responsible for the revision of ISO 19115, now ready for "Draft International Standard" (DIS) status. With ISO 19115 an established, capability-rich, open standard for geographic metadata, EIP v1 is expected to be widely acceptable within the community and readily sustainable over the long-term. The EIP design, also per community requirements, will enable discovery, evaluation, and access to types of information resources considered important to the community, including structured and unstructured digital resources, and physical assets such as hardcopy documents and material samples. This presentation will briefly review the development of this initiative as well as the current and planned Work Group activities. More time will be spent providing an overview of the EIP v1, including the requirements it prescribes, design efforts made to enable automated metadata capture and processing, and the structure and content of its documentation, which was written to minimize ambiguity and facilitate implementation. The Work Group considers EIP v1 a solid initial design for interoperable metadata, and first step toward the vision of the Initiative.

An analysis of the effect of STEM initiatives on socially responsible diversity management in the US aerospace and defense industry

NASA Astrophysics Data System (ADS)

Johnson-Oliver, Patrick

Workforce diversity is a growing concern at a global level and enlightened economic self-interest and corporate image compels industries to leverage it as a competitive advantage. The US aerospace and defense industry (US ADI) addresses workforce diversity through socially responsible diversity management. Prior research into the topic of approaching workforce diversity as a business rationale and a moral imperative has been limited. Scharmer and Kaufer's (2013) Theory U guided this longitudinal explanatory quantitative study, leading from the future as it emerged relative to socially responsible diversity management to compel industry to remove blind spots and co-create an economy that benefits all by promoting workforce diversity as a dual agenda. This study filled a research gap investigating the business case for diversity as a dual agenda in aerospace industry science, technology, engineering, and mathematics (STEM) disciplines. The study also investigated the America COMPETES Act as a moderator of the relationship between historically black colleges and universities (HBCUs) and industry. Data was retrieved for secondary data analysis from the National Science Foundation (NSF) and other public government services and agency websites. Two hypotheses were tested using quantitative analysis including descriptive statistics, linear regression, ANOVA, and two factor analysis. The statistical results were analyzed and deductive logic employed to develop conclusions for the study. There was a significant relationship found between both predictors and socially responsible diversity management. The results reinforce the necessity for the aerospace defense industry to promote the dual agenda of the business case for diversity as complementary; not as competing mandates.

Agro-food industry growth and obesity in China: what role for regulating food advertising and promotion and nutrition labelling?

PubMed

Hawkes, C

2008-03-01

Taking a food supply chain approach, this paper examines the regulation of food marketing and nutrition labelling as strategies to help combat obesity in China in an era of rapid agro-food industry growth. China is the largest food producer and consumer in the world. Since the early 1980s, the agro-food industry has undergone phenomenal expansion throughout the food supply chain, from agricultural production to trade, agro-food processing to food retailing, and from food service to advertising and promotion. This industry growth, alongside related socioeconomic changes and government policies, has encouraged a 'nutrition transition'. China's population, especially in urban areas, is now consuming significantly more energy from dietary fat, which is leading to higher rates of obesity. Regulation of food advertising and promotion and nutrition labelling has the potential to help prevent the further growth of obesity in China and encourage the agro-food industry to supplier healthier foods. Government legislation and guidance, as well as self-regulation and voluntary initiatives, are needed to reduce children's exposure to food advertising and promotion, and increase the effectiveness of nutrition labelling. Policies on food marketing and nutrition labelling should be adapted to the China context, and accompanied by further action throughout the food supply chain. Given China's unique characteristics and position in the world today, there is an opportunity for the government and the agro-food industry to lead the world by creating a balanced, health promoting model of complementary legislation and industry action.

Commercial and Industrial Solid Waste Incineration Units (CISWI): New Source Performance Standards (NSPS) and Emission Guidelines (EG) for Existing Sources

EPA Pesticide Factsheets

Learn about the New Source Performance Standards (NSPS) for commercial and industrial solid waste incineration (CISWI) units including emission guidelines and compliance times for the rule. Read the rule history and summary, and find supporting documents

Tourism Standards: Western Canada. Certification Field Test. Final Report. Formative Evaluation.

ERIC Educational Resources Information Center

Alberta Tourism Education Council, Edmonton.

The Tourism Standards Consortium (TSC) is a partnership of the governments of Canada's western provinces (Alberta, Manitoba, Saskatchewan, and British Columbia), the provinces' tourism industries, and the Pacific Rim Institute of Tourism in British Columbia. In an effort to increase professionalism in Western Canada's tourism industry, the TSC…

Evaluation of fungicides for hop downy mildew, Hubbard, Oregon, 2016

USDA-ARS?s Scientific Manuscript database

This research was conducted to quantify the degree of control of the disease with a phosphorous acid-based fungicide, the present industry-standard for management of downy mildew on hop in the Pacific Northwestern U.S. No suppression of the disease was observed with the industry standard fungicide,...

The adoption of transit communications interface profiles in the transit industry : factors inhibiting adoption and recommendations for moving forward.

DOT National Transportation Integrated Search

2016-07-11

This report identifies the institutional and economic reasons that have impeded the adoption of TCIP standards into the public transit industry. Overall, there is a fundamental tradeoff to be made in the adoption of technology standards such as TCIP,...

77 FR 55755 - Small Business Size Standards: Agriculture, Forestry, Fishing, and Hunting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-11

...: Agriculture, Forestry, Fishing, and Hunting AGENCY: U.S. Small Business Administration. ACTION: Proposed rule... for 11 industries in North American Industry Classification System (NAICS) Sector 11, Agriculture... standards was published in the Federal Register on July 18, 2008 (73 FR 41237). NAICS 11, Agriculture...

36 CFR 28.13 - Variance, commercial and industrial application procedures.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 36 Parks, Forests, and Public Property 1 2010-07-01 2010-07-01 false Variance, commercial and industrial application procedures. 28.13 Section 28.13 Parks, Forests, and Public Property NATIONAL PARK SERVICE, DEPARTMENT OF THE INTERIOR FIRE ISLAND NATIONAL SEASHORE: ZONING STANDARDS Federal Standards and...

75 FR 39610 - Self-Regulatory Organizations; Financial Industry Regulatory Authority, Inc.; Notice of Filing...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-09

... Effectiveness of Proposed Rule Change Amending Financial Industry Regulatory Authority, Inc. Online Form NMA... Substance of the Proposed Rule Change FINRA is proposing to amend online Form NMA, the standardized... Proposed Rule Change 1. Purpose Form NMA is the standardized online membership application form applicants...

77 FR 70865 - Self-Regulatory Organizations; National Securities Clearing Corporation; Notice of Filing and...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-27

... industry standard for processing and settling mutual fund transactions. Through automated, standardized... trend in the mutual fund industry toward omnibus processing, a practice where distribution firms bundle... to Fund/SERV[supreg] Fees November 20, 2012. Pursuant to Section 19(b)(1) of the Securities Exchange...

36 CFR 28.13 - Variance, commercial and industrial application procedures.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 36 Parks, Forests, and Public Property 1 2011-07-01 2011-07-01 false Variance, commercial and industrial application procedures. 28.13 Section 28.13 Parks, Forests, and Public Property NATIONAL PARK SERVICE, DEPARTMENT OF THE INTERIOR FIRE ISLAND NATIONAL SEASHORE: ZONING STANDARDS Federal Standards and...

40 CFR 82.270 - Prohibitions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... capable of recycling the blend to the relevant industry standards for the chemical purity of each... April 6, 1998 the provision that the blend must be returned to it or its designee for recycling; and (3... April 6, 1998 and returned to it for recycling to the relevant industry standards for the chemical...

40 CFR 82.270 - Prohibitions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... capable of recycling the blend to the relevant industry standards for the chemical purity of each... April 6, 1998 the provision that the blend must be returned to it or its designee for recycling; and (3... April 6, 1998 and returned to it for recycling to the relevant industry standards for the chemical...

40 CFR 82.270 - Prohibitions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... capable of recycling the blend to the relevant industry standards for the chemical purity of each... April 6, 1998 the provision that the blend must be returned to it or its designee for recycling; and (3... April 6, 1998 and returned to it for recycling to the relevant industry standards for the chemical...

40 CFR 82.270 - Prohibitions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... capable of recycling the blend to the relevant industry standards for the chemical purity of each... April 6, 1998 the provision that the blend must be returned to it or its designee for recycling; and (3... April 6, 1998 and returned to it for recycling to the relevant industry standards for the chemical...

40 CFR 82.270 - Prohibitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... capable of recycling the blend to the relevant industry standards for the chemical purity of each... April 6, 1998 the provision that the blend must be returned to it or its designee for recycling; and (3... April 6, 1998 and returned to it for recycling to the relevant industry standards for the chemical...

The Structuring of Shared Voluntary Standards in the U.S. Semiconductor Industry: Communicating to Reach Agreement.

ERIC Educational Resources Information Center

Browning, Larry D.; Beyer, Janice M.

1998-01-01

Contributes to scholarship on organizational communication by tracing how voluntary cooperative standards were developed for the semiconductor industry through reflexive communication processes initiated by the SEMATECH consortium. Analyzes seven pivotal incidents that show how increased communication produced new provinces of meaning, actions,…

HIV / AIDS and tourism.

PubMed

Forsythe, S

1999-01-01

Since it tends to be significantly affected by HIV/AIDS, the tourism sector is a likely target for HIV/AIDS interventions in many countries. The tourist industry is at particular risk from the pandemic because of the mobility of the work force, the presence of sex tourists, and the heavy reliance of many countries upon tourism revenues. Indeed, tourism is one of the largest and fastest growing industries in many countries. Some people have speculated that potential tourists' fear of AIDS could discourage them from visiting certain countries, while others have even suggested that tourism should be discouraged because the industry contributes to the spread of HIV/AIDS. When traveling, tourists often take risks that they would not take at home. They tend to drink more, use drugs more, and be generally more adventurous while on holiday. Such adventures often include taking sexual risks. When tourists have sex with prostitutes, hotel staff, and others in the local population, a bridge can be created for HIV to cross back and forth between the tourist's home country and the tourist destination. The author reviews selected studies on the relationship between HIV/AIDS and tourism. Overall, the existing literature offers no definitive evidence that AIDS has had any lasting impact upon the tourism industry anywhere in the world. Rather, promoting a healthy tourism industry and HIV/AIDS prevention are likely complementary in many ways.

White biotechnology: State of the art strategies for the development of biocatalysts for biorefining.

PubMed

Heux, S; Meynial-Salles, I; O'Donohue, M J; Dumon, C

2015-12-01

White biotechnology is a term that is now often used to describe the implementation of biotechnology in the industrial sphere. Biocatalysts (enzymes and microorganisms) are the key tools of white biotechnology, which is considered to be one of the key technological drivers for the growing bioeconomy. Biocatalysts are already present in sectors such as the chemical and agro-food industries, and are used to manufacture products as diverse as antibiotics, paper pulp, bread or advanced polymers. This review proposes an original and global overview of highly complementary fields of biotechnology at both enzyme and microorganism level. A certain number of state of the art approaches that are now being used to improve the industrial fitness of biocatalysts particularly focused on the biorefinery sector are presented. The first part deals with the technologies that underpin the development of industrial biocatalysts, notably the discovery of new enzymes and enzyme improvement using directed evolution techniques. The second part describes the toolbox available by the cell engineer to shape the metabolism of microorganisms. And finally the last part focuses on the 'omic' technologies that are vital for understanding and guide microbial engineering toward more efficient microbial biocatalysts. Altogether, these techniques and strategies will undoubtedly help to achieve the challenging task of developing consolidated bioprocessing (i.e. CBP) readily available for industrial purpose. Copyright © 2015 Elsevier Inc. All rights reserved.

Comparing hospital staff and patient perceptions of customer service: a pilot study utilizing survey and focus group data.

PubMed

Fottler, Myron D; Dickson, Duncan; Ford, Robert C; Bradley, Kenneth; Johnson, Lee

2006-02-01

The measurement of patient satisfaction is crucial to enhancing customer service and competitive advantage in the health-care industry. While there are numerous approaches to such measurement, this paper provides a case study which compares and contrasts patient and staff perceptions of customer service using both survey and focus group data. Results indicate that there is a high degree of correlation between staff and patient perceptions of customer service based on both survey and focus group data. However, the staff and patient subgroups also provided complementary information regarding patient perceptions of their service experience. Staff members tended to have more negative perceptions of service attributes than did the patients themselves. The focus group results provide complementary information to survey results in terms of greater detail and more managerially relevant information. While these results are derived from a pilot study, they suggest that diversification of data sources beyond patient surveys may enhance the utility of customer service information. If further research can affirm these findings, they create exciting possibilities for gathering valid, reliable and cost-effective customer service information.

``Just Another Distribution Channel?''

NASA Astrophysics Data System (ADS)

Lemstra, Wolter; de Leeuw, Gerd-Jan; van de Kar, Els; Brand, Paul

The telecommunications-centric business model of mobile operators is under attack due to technological convergence in the communication and content industries. This has resulted in a plethora of academic contributions on the design of new business models and service platform architectures. However, a discussion of the challenges that operators are facing in adopting these models is lacking. We assess these challenges by considering the mobile network as part of the value system of the content industry. We will argue that from the perspective of a content provider the mobile network is ‘just another’ distribution channel. Strategic options available for the mobile communication operators are to deliver an excellent distribution channel for content delivery or to move upwards in the value chain by becoming a content aggregator. To become a mobile content aggregator operators will have to develop or acquire complementary resources and capabilities. Whether this strategic option is sustainable remains open.

Development of advanced structural analysis methodologies for predicting widespread fatigue damage in aircraft structures

NASA Technical Reports Server (NTRS)

Harris, Charles E.; Starnes, James H., Jr.; Newman, James C., Jr.

1995-01-01

NASA is developing a 'tool box' that includes a number of advanced structural analysis computer codes which, taken together, represent the comprehensive fracture mechanics capability required to predict the onset of widespread fatigue damage. These structural analysis tools have complementary and specialized capabilities ranging from a finite-element-based stress-analysis code for two- and three-dimensional built-up structures with cracks to a fatigue and fracture analysis code that uses stress-intensity factors and material-property data found in 'look-up' tables or from equations. NASA is conducting critical experiments necessary to verify the predictive capabilities of the codes, and these tests represent a first step in the technology-validation and industry-acceptance processes. NASA has established cooperative programs with aircraft manufacturers to facilitate the comprehensive transfer of this technology by making these advanced structural analysis codes available to industry.

Control of crystallite and particle size in the synthesis of layered double hydroxides: Macromolecular insights and a complementary modeling tool.

PubMed

Galvão, Tiago L P; Neves, Cristina S; Caetano, Ana P F; Maia, Frederico; Mata, Diogo; Malheiro, Eliana; Ferreira, Maria J; Bastos, Alexandre C; Salak, Andrei N; Gomes, José R B; Tedim, João; Ferreira, Mário G S

2016-04-15

Zinc-aluminum layered double hydroxides with nitrate intercalated (Zn(n)Al-NO3, n=Zn/Al) is an intermediate material for the intercalation of different functional molecules used in a wide range of industrial applications. The synthesis of Zn(2)Al-NO3 was investigated considering the time and temperature of hydrothermal treatment. By examining the crystallite size in two different directions, hydrodynamic particle size, morphology, crystal structure and chemical species in solution, it was possible to understand the crystallization and dissolution processes involved in the mechanisms of crystallite and particle growth. In addition, hydrogeochemical modeling rendered insights on the speciation of different metal cations in solution. Therefore, this tool can be a promising solution to model and optimize the synthesis of layered double hydroxide-based materials for industrial applications. Copyright © 2016 Elsevier Inc. All rights reserved.

Integrating animal health and food safety surveillance data from slaughterhouse control.

PubMed

Lynch, J A; Silva, P

2013-08-01

Surveillance at the slaughterhouse level for animal health and food safety purposes encompasses examination for the presence of pathology, pathogens, drug residues, chemical contaminants and antimicrobial resistance. Government, industry and academia are the primary proponents of such surveillance. A variety of policies and policy instruments from voluntary to legislative may be applied to promote or obligate participation. Efforts to integrate data across such diverse organisations encounter significant legal, logistical and financial challenges. Enhancement of policies to encourage effective integration of animal health and food safety surveillance data from slaughterhouse control should promote: a long-term approach; collaboration among government, industry and academia; application of a risk-based scheme; and transparent public access to data, with generation of consumer-oriented communications derived from the data. A strong case can be made that the complementary pursuit of both sustainable animal health and food safety can continue to be aided by surveillance at the slaughterhouse level.

Updating OSHA Standards Based on National Consensus Standards; Eye and Face Protection. Final rule.

PubMed

2016-03-25

On March 13, 2015, OSHA published in the Federal Register a notice of proposed rulemaking (NPRM) to revise its eye and face protection standards for general industry, shipyard employment, marine terminals, longshoring, and construction by updating the references to national consensus standards approved by the American National Standards Institute (ANSI). OSHA received no significant objections from commenters and therefore is adopting the amendments as proposed. This final rule updates the references in OSHA's eye and face standards to reflect the most recent edition of the ANSI/International Safety Equipment Association (ISEA) eye and face protection standard. It removes the oldest-referenced edition of the same ANSI standard. It also amends other provisions of the construction eye and face protection standard to bring them into alignment with OSHA's general industry and maritime standards.

29 CFR 401.3 - Industry affecting commerce.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 29 Labor 2 2012-07-01 2012-07-01 false Industry affecting commerce. 401.3 Section 401.3 Labor... STANDARDS MEANING OF TERMS USED IN THIS SUBCHAPTER § 401.3 Industry affecting commerce. Industry affecting commerce means any activity, business, or industry in commerce or in which a labor dispute would hinder or...

29 CFR 401.3 - Industry affecting commerce.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 29 Labor 2 2014-07-01 2014-07-01 false Industry affecting commerce. 401.3 Section 401.3 Labor... STANDARDS MEANING OF TERMS USED IN THIS SUBCHAPTER § 401.3 Industry affecting commerce. Industry affecting commerce means any activity, business, or industry in commerce or in which a labor dispute would hinder or...

29 CFR 401.3 - Industry affecting commerce.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 2 2011-07-01 2011-07-01 false Industry affecting commerce. 401.3 Section 401.3 Labor... STANDARDS MEANING OF TERMS USED IN THIS SUBCHAPTER § 401.3 Industry affecting commerce. Industry affecting commerce means any activity, business, or industry in commerce or in which a labor dispute would hinder or...

29 CFR 401.3 - Industry affecting commerce.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 2 2010-07-01 2010-07-01 false Industry affecting commerce. 401.3 Section 401.3 Labor... STANDARDS MEANING OF TERMS USED IN THIS SUBCHAPTER § 401.3 Industry affecting commerce. Industry affecting commerce means any activity, business, or industry in commerce or in which a labor dispute would hinder or...

29 CFR 401.3 - Industry affecting commerce.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 29 Labor 2 2013-07-01 2013-07-01 false Industry affecting commerce. 401.3 Section 401.3 Labor... STANDARDS MEANING OF TERMS USED IN THIS SUBCHAPTER § 401.3 Industry affecting commerce. Industry affecting commerce means any activity, business, or industry in commerce or in which a labor dispute would hinder or...

SAMICS support study. Volume 1: Cost account catalog

NASA Technical Reports Server (NTRS)

1977-01-01

The Jet Propulsion Laboratory (JPL) is examining the feasibility of a new industry to produce photovoltaic solar energy collectors similar to those used on spacecraft. To do this, a standardized costing procedure was developed. The Solar Array Manufacturing Industry Costing Standards (SAMICS) support study supplies the following information: (1) SAMICS critique; (2) Standard data base--cost account structure, expense item costs, inflation rates, indirect requirements relationships, and standard financial parameter values; (3) Facilities capital cost estimating relationships; (4) Conceptual plant designs; (5) Construction lead times; (6) Production start-up times; (7) Manufacturing price estimates.

Complementary Metal-Oxide-Silicon (CMOS)-Memristor Hybrid Nanoelectronics for Advanced Encryption Standard (AES) Encryption

DTIC Science & Technology

2016-04-01

with Al top electrodes and Cu bottom electrodes. ................... 9 Figure 4. SPICE netlist structure...memory elements play a part in logic gate. 4.4.2 Simulation SPICE Simulation Program for Integrated Circuits Emphasis ( SPICE ) is a general-purpose...analog circuit simulator that was developed at the Electronics Research Laboratory of the University of California, Berkeley [6]. In 1975, SPICE

Health Care Utilization Among Complementary and Alternative Medicine Users in a Large Military Cohort

DTIC Science & Technology

2011-01-01

Sources In addition to our longitudinal survey instrument , other data sources include the Standard Inpatient Data Record (SIDR), which is an...therapy, high-dose megavita- min therapy, homeopathic remedies, hypnosis , massage therapy, relaxation, and spiritual healing. For the pur- poses of these...analyses, acupuncture, biofeedback, chiro- practic care, energy healing, folk medicine, hypnosis , and massage therapy were grouped together as practi

Prevalence, predictors, and perceived effectiveness of complementary, alternative and integrative medicine in adult-onset primary dystonia

PubMed Central

Fleming, Brandy M.; Schwab, Emiko L.; Nouer, Simonne S.; Wan, Jim Y.; LeDoux, Mark S.

2012-01-01

Background Complementary and Alternative Medicine (CAM) use is on the rise in both the US and Europe, despite questions about its safety, effectiveness and lack of national standards. We aimed to determine the prevalence and predictors of CAM and integrative medicine use (CAM-I) and perceived effectiveness compared to the standard treatment of botulinum toxin injections in patients with adult-onset primary dystonia. Methods This was a retrospective questionnaire study of 389 dystonia patients examining the effects age, gender, education level and number of anatomical regions affected on botulinum toxin and CAM-I use and their perceived effectiveness. Results 53% (208) of patients reported CAM-I use, while 90% (349) used the standard treatment (botulinum toxin), and 48% used both. Education was the only significant predictor of CAM-I use – individuals with bachelor’ s degrees were more likely to try CAM-I whereas those with high school diplomas were less likely. The mean effectiveness rate for botulinum toxin injections (59%) significantly exceeded that for and CAM-I (28%, p<0.0001). Conclusions Our work highlights the need for scientifically sound studies to determine the safety, effectiveness and expense of CAM-I treatments for dystonia and other neurological disorders given that CAM-I use is steadily increasing, there is great variability in what is classified as CAM-I, and the effectiveness of some modalities may be significantly less than conventional medical treatments. PMID:22633698

Prevalence, predictors, and perceived effectiveness of complementary, alternative and integrative medicine in adult-onset primary dystonia.

PubMed

Fleming, Brandy M; Schwab, Emiko L; Nouer, Simonne S; Wan, Jim Y; LeDoux, Mark S

2012-09-01

Complementary and Alternative Medicine (CAM) use is on the rise in both the US and Europe, despite questions about its safety and effectiveness, and lack of national standards. We aimed to determine the prevalence and predictors of CAM and integrative medicine use (CAM-I) and perceived effectiveness compared to the standard treatment of botulinum toxin injections in patients with adult-onset primary dystonia. This was a retrospective questionnaire study of 389 dystonia patients examining the effects age, gender, education level and number of affected anatomical regions on botulinum toxin and CAM-I use and their perceived effectiveness. 53% (208) of patients reported CAM-I use, while 90% (349) used the standard treatment (botulinum toxin), and 48% used both. Education was the only significant predictor of CAM-I use - individuals with bachelor's degrees were more likely to try CAM-I whereas those with high school diplomas were less likely. The mean effectiveness rate for botulinum toxin injections (59%) significantly exceeded that for CAM-I (28%, p < 0.0001). Our work highlights the need for scientifically sound studies to determine the safety, effectiveness and expense of CAM-I treatments for dystonia and other neurological disorders given that CAM-I use is steadily increasing, there is great variability in what is classified as CAM-I, and the effectiveness of some modalities may be significantly less than conventional medical treatments. Copyright © 2012 Elsevier Ltd. All rights reserved.

International Comparison Test in Asia-Pacific Region for Impulse Voltage Measurements

NASA Astrophysics Data System (ADS)

Wakimoto, Takayuki; Ishii, Masaru; Goshima, Hisashi; Hino, Etsuhiro; Shimizu, Hiroyuki; Li, Yi; Ik-Soo, Kim

The national standard class divider for the lightning impulse voltage measurements in Japan was developed in 1998. After three years, the standard impulse voltage calibrator was manufactured, too. These standard equipment are used as an industrial standard, and the performance had been evaluated annually supported by Ministry of Economy, Trade and Industry (METI). The standard impulse measuring system including the standard divider participated in the worldwide comparison test and its good performance was confirmed in 1999. Another international comparison test was carried out among three countries in the Asia-Pacific region in 2004 again and the standard measuring system participated in the test. In this paper, the details and the results of the international comparison tests in 2004 are described.

Modified locking thread form for fastener

NASA Technical Reports Server (NTRS)

Roopnarine, (Inventor); Vranish, John D. (Inventor)

1998-01-01

A threaded fastener has a standard part with a standard thread form characterized by thread walls with a standard included angle, and a modified part complementary to the standard part having a modified thread form characterized by thread walls which are symmetrically inclined with a modified included angle that is different from the standard included angle of the standard part's thread walls, such that the threads of one part make pre-loaded edge contact with the thread walls of the other part. The thread form of the modified part can have an included angle that is greater, less, or compound as compared to the included angle of the standard part. The standard part may be a bolt and the modified part a nut, or vice versa. The modified thread form holds securely even under large vibrational forces, it permits bi-directional use of standard mating threads, is impervious to the build up of tolerances and can be manufactured with a wider range of tolerances without loss of functionality, and distributes loading stresses (per thread) in a manner that decreases the possibility of single thread failure.

36 CFR 27.2 - Commercial and industrial activities.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 36 Parks, Forests, and Public Property 1 2010-07-01 2010-07-01 false Commercial and industrial... INTERIOR CAPE COD NATIONAL SEASHORE; ZONING STANDARDS § 27.2 Commercial and industrial activities. No commercial or industrial districts may be established within the Cape Cod National Seashore. ...

Illiteracy in Devon During the Industrial Revolution, 1754-1844

ERIC Educational Resources Information Center

Stephens, W. B.

1976-01-01

Indicates the likelihood that the initial period of the Industrial Revolution was one of deteriorating educational standards in most areas, especially in those that were seats of displaced domestic textile industries. (Author)

Machine Tool Advanced Skills Technology (MAST). Common Ground: Toward a Standards-Based Training System for the U.S. Machine Tool and Metal Related Industries. Volume 15: Administrative Information, of a 15-Volume Set of Skill Standards and Curriculum Training Materials for the Precision Manufacturing Industry.

ERIC Educational Resources Information Center

Texas State Technical Coll., Waco.

This volume developed by the Machine Tool Advanced Skill Technology (MAST) program contains key administrative documents and provides additional sources for machine tool and precision manufacturing information and important points of contact in the industry. The document contains the following sections: a foreword; grant award letter; timeline for…

Standards, Regulation and Registration of Dental Laboratories. An Industry Update.

PubMed

Giovannone, Paul L

2015-01-01

State dental associations are showing increased interest in maintaining current standards and regulations affecting the dental laboratory industry as mandated by the Food and Drug Administration. The domestic dental laboratory industry is being significantly stressed by foreign competition, rapid technology development and unprecedented consolidation, which are changing the way that prosthetic devices and restorations are manufactured and delivered to dentists. Of paramount importance to the prescribing dentist is the accurate documentation of the source and materials being used in prostheses being delivered to patients.

The Food Industry and Self-Regulation: Standards to Promote Success and to Avoid Public Health Failures

PubMed Central

Sharma, Lisa L.; Teret, Stephen P.

2010-01-01

Threatened by possible government regulation and critical public opinion, industries often undertake self-regulatory actions, issue statements of concern for public welfare, and assert that self-regulation is sufficient to protect the public. The food industry has made highly visible pledges to curtail children's food marketing, sell fewer unhealthy products in schools, and label foods in responsible ways. Ceding regulation to industry carries opportunities but is highly risky. In some industries (e.g., tobacco), self-regulation has been an abject failure, but in others (e.g., forestry and marine fisheries), it has been more successful. We examined food industry self-regulation in the context of other self-regulatory successes and failures and defined 8 standards that should be met if self-regulation is to be effective. PMID:20019306

Modular expert system for the diagnosis of operating conditions of industrial anaerobic digestion plants.

PubMed

Lardon, L; Puñal, A; Martinez, J A; Steyer, J P

2005-01-01

Anaerobic digestion (AD) plants are highly efficient wastewater treatment processes with possible energetic valorisation. Despite these advantages, many industries are still reluctant to use them because of their instability in the face of changes in operating conditions. To the face this drawback and to enhance the industrial use of anaerobic digestion, one solution is to develop and to implement knowledge base (KB) systems that are able to detect and to assess in real-time the quality of operating conditions of the processes. Case-based techniques and heuristic approaches have been already tested and validated on AD processes but two major properties were lacking: modularity of the system (the knowledge base system should be easily tuned on a new process and should still work if one or more sensors are added or removed) and uncertainty management (the assessment of the KB system should remain relevant even in the case of too poor or conflicting information sources). This paper addresses these two points and presents a modular KB system where an uncertain reasoning formalism is used to combine partial and complementary fuzzy diagnosis modules. Demonstration of the interest of the approach is provided from real-life experiments performed on an industrial 2,000 m3 CSTR anaerobic digester.

[Effect analysis on the two total load control methods for poisonous heavy metals].

PubMed

Fu, Guo-Wei

2012-12-01

Firstly it should be made clear that implementation of source total load control for the first type of pollutants is necessary for environmental pollution control legislation and economic structure regulation. This kind of surveillance method has been more practical to be implemented since the Manual of the Industry Discharge Coefficient of First National Pollution Sources Investigation was published. The source total load control and water environment total load control are independent of each other and none of them is redundant, on the other side they can be complementary to each other. In the present, some local planning managers are blurring and confusing the contents and styles of the two surveillance methods. They just use the water total load control to manage all the pollutants, and source total load control is discarded, which results in the loss of control for the first type of pollutants especially for the drinking water source surveillance. There is a big difference between the water quality standards and the water environmental background concentration values for the first type of pollutants in the Environmental quality standard for surface water (GB 3838-88), which means that there are problems such as "relaxing the pollutant discharge permit" and "risk induced by valence state change". Taking an enterprise with 10t electrolytic lead production capacity as an example, there is a big difference between the allowable lead discharged loads by the two total load surveillance methods. In summary, it will bring a lot of harmful effects if the water total load control is implemented for the two types of pollutants, so the source total load control and water environmental total load control should be implemented strictly at the same time.

1996 DOE technical standards program workshop: Proceedings

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1996-07-01

The workshop theme is `The Strategic Standardization Initiative - A Technology Exchange and Global Competitiveness Challenge for DOE.` The workshop goal is to inform the DOE technical standards community of strategic standardization activities taking place in the Department, other Government agencies, standards developing organizations, and industry. Individuals working on technical standards will be challenged to improve cooperation and communications with the involved organizations in response to the initiative. Workshop sessions include presentations by representatives from various Government agencies that focus on coordination among and participation of Government personnel in the voluntary standards process; reports by standards organizations, industry, and DOEmore » representatives on current technology exchange programs; and how the road ahead appears for `information superhighway` standardization. Another session highlights successful standardization case studies selected from several sites across the DOE complex. The workshop concludes with a panel discussion on the goals and objectives of the DOE Technical Standards Program as envisioned by senior DOE management. The annual workshop on technical standards has proven to be an effective medium for communicating information related to standards throughout the DOE community. Technical standards are used to transfer technology and standardize work processes to produce consistent, acceptable results. They provide a practical solution to the Department`s challenge to protect the environment and the health and safety of the public and workers during all facility operations. Through standards, the technologies of industries and governments worldwide are available to DOE. The DOE Technical Standards Program, a Department-wide effort that crosscuts all organizations and disciplines, links the Department to those technologies.« less

[Noise hazard and hearing loss in workers in automotive component manufacturing industry in Guangzhou, China].

PubMed

Wang, Zhi; Liang, Jiabin; Rong, Xing; Zhou, Hao; Duan, Chuanwei; Du, Weijia; Liu, Yimin

2015-12-01

To investigate noise hazard and its influence on hearing loss in workers in the automotive component manufacturing industry. Noise level in the workplace of automotive component manufacturing enterprises was measured and hearing examination was performed for workers to analyze the features and exposure levels of noise in each process, as well as the influence on hearing loss in workers. In the manufacturing processes for different products in this industry, the manufacturing processes of automobile hub and suspension and steering systems had the highest degrees of noise hazard, with over-standard rates of 79.8% and 57.1%, respectively. In the different technical processes for automotive component manufacturing, punching and casting had the highest degrees of noise hazard, with over-standard rates of 65.0% and 50%, respectively. The workers engaged in the automotive air conditioning system had the highest rate of abnormal hearing ability (up to 3.1%). In the automotive component manufacturing industry, noise hazard exceeds the standard seriously. Although the rate of abnormal hearing is lower than the average value of the automobile manufacturing industry in China, this rate tends to increase gradually. Enough emphasis should be placed on the noise hazard in this industry.

Guidelines for Technology Infrastructure in Connecticut Schools: An Implementation Guide for the Connecticut Statewide Educational Technology Plan.

ERIC Educational Resources Information Center

Center for Educational Leadership and Technology, Inc., Marlborough, MA.

This document presents guidelines and recommendations for development of a technology infrastructure in Connecticut public schools that conforms to national industry standards for voice, video, and data communications. The guidelines present information on the state statutes regarding facilities implementation and describe industry standards.…

Summary of Public Comments and Responses for Industrial, Commercial, and Institutional Boilers and Process Heaters National Emission Standards for Hazardous Air Pollutants (NESHAP) for Major Sources

EPA Pesticide Factsheets

This page has a 12/2012 document that provides EPA’s responses to public comments on EPA’s Proposed National Emission Standards for Hazardous Air Pollutants for Major Sources: Industrial, Commercial, and Institutional Boilers and Process Heaters

49 CFR 231.33 - Procedure for special approval of existing industry safety appliance standards.

Code of Federal Regulations, 2013 CFR

2013-10-01

... specific number, dimension, location, and manner of application of each safety appliance contained in the industry standard; (3) Appropriate data or analysis, or both, for FRA to consider in determining whether..., inspection, testing, and maintenance under this part; (ii) Any organizations or bodies that either issued the...

49 CFR 231.33 - Procedure for special approval of existing industry safety appliance standards.

Code of Federal Regulations, 2014 CFR

2014-10-01

... specific number, dimension, location, and manner of application of each safety appliance contained in the industry standard; (3) Appropriate data or analysis, or both, for FRA to consider in determining whether..., inspection, testing, and maintenance under this part; (ii) Any organizations or bodies that either issued the...

49 CFR 231.33 - Procedure for special approval of existing industry safety appliance standards.

Code of Federal Regulations, 2011 CFR

2011-10-01

... specific number, dimension, location, and manner of application of each safety appliance contained in the industry standard; (3) Appropriate data or analysis, or both, for FRA to consider in determining whether..., inspection, testing, and maintenance under this part; (ii) Any organizations or bodies that either issued the...

49 CFR 231.33 - Procedure for special approval of existing industry safety appliance standards.

Code of Federal Regulations, 2012 CFR

2012-10-01

... specific number, dimension, location, and manner of application of each safety appliance contained in the industry standard; (3) Appropriate data or analysis, or both, for FRA to consider in determining whether..., inspection, testing, and maintenance under this part; (ii) Any organizations or bodies that either issued the...

33 CFR 137.20 - May industry standards be used to comply with this regulation?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false May industry standards be used to comply with this regulation? 137.20 Section 137.20 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE POLLUTION FINANCIAL RESPONSIBILITY AND COMPENSATION OIL...

33 CFR 137.20 - May industry standards be used to comply with this regulation?

Code of Federal Regulations, 2012 CFR

2012-07-01

... 33 Navigation and Navigable Waters 2 2012-07-01 2012-07-01 false May industry standards be used to comply with this regulation? 137.20 Section 137.20 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE POLLUTION FINANCIAL RESPONSIBILITY AND COMPENSATION OIL...

33 CFR 137.20 - May industry standards be used to comply with this regulation?

Code of Federal Regulations, 2011 CFR

2011-07-01

... 33 Navigation and Navigable Waters 2 2011-07-01 2011-07-01 false May industry standards be used to comply with this regulation? 137.20 Section 137.20 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE POLLUTION FINANCIAL RESPONSIBILITY AND COMPENSATION OIL...

33 CFR 137.20 - May industry standards be used to comply with this regulation?

Code of Federal Regulations, 2013 CFR

2013-07-01

... 33 Navigation and Navigable Waters 2 2013-07-01 2013-07-01 false May industry standards be used to comply with this regulation? 137.20 Section 137.20 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE POLLUTION FINANCIAL RESPONSIBILITY AND COMPENSATION OIL...

33 CFR 137.20 - May industry standards be used to comply with this regulation?

Code of Federal Regulations, 2014 CFR

2014-07-01

... 33 Navigation and Navigable Waters 2 2014-07-01 2014-07-01 false May industry standards be used to comply with this regulation? 137.20 Section 137.20 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE POLLUTION FINANCIAL RESPONSIBILITY AND COMPENSATION OIL...

76 FR 23714 - Railroad Safety Appliance Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-28

... would include each of the elements that would be necessary to allow it to make an informed decision on a... for the review and approval of existing industry standards. This process will permit railroad industry.... Section 238.230 borrows the process set out in Sec. 238.21. It allows a recognized representative of the...

40 CFR 266.107 - Standards to control hydrogen chloride (HCl) and chlorine gas (Cl2) emissions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Industrial Furnaces § 266.107 Standards to control hydrogen chloride (HCl) and chlorine gas (Cl2) emissions... streams, including hazardous waste, fuels, and industrial furnace feed stocks shall not exceed the levels...: terrain-adjusted effective stack height, good engineering practice stack height, terrain type, land use...

40 CFR 266.107 - Standards to control hydrogen chloride (HCl) and chlorine gas (Cl2) emissions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Industrial Furnaces § 266.107 Standards to control hydrogen chloride (HCl) and chlorine gas (Cl2) emissions... streams, including hazardous waste, fuels, and industrial furnace feed stocks shall not exceed the levels...: terrain-adjusted effective stack height, good engineering practice stack height, terrain type, land use...

40 CFR 266.107 - Standards to control hydrogen chloride (HCl) and chlorine gas (Cl2) emissions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Industrial Furnaces § 266.107 Standards to control hydrogen chloride (HCl) and chlorine gas (Cl2) emissions... streams, including hazardous waste, fuels, and industrial furnace feed stocks shall not exceed the levels...: terrain-adjusted effective stack height, good engineering practice stack height, terrain type, land use...

40 CFR 266.107 - Standards to control hydrogen chloride (HCl) and chlorine gas (Cl2) emissions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Industrial Furnaces § 266.107 Standards to control hydrogen chloride (HCl) and chlorine gas (Cl2) emissions... streams, including hazardous waste, fuels, and industrial furnace feed stocks shall not exceed the levels...: terrain-adjusted effective stack height, good engineering practice stack height, terrain type, land use...

40 CFR 266.107 - Standards to control hydrogen chloride (HCl) and chlorine gas (Cl2) emissions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Industrial Furnaces § 266.107 Standards to control hydrogen chloride (HCl) and chlorine gas (Cl2) emissions... streams, including hazardous waste, fuels, and industrial furnace feed stocks shall not exceed the levels...: terrain-adjusted effective stack height, good engineering practice stack height, terrain type, land use...

76 FR 31457 - Airworthiness Directives; Diamond Aircraft Industries GmbH Model DA 42 Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-01

... Airworthiness Directives; Diamond Aircraft Industries GmbH Model DA 42 Airplanes AGENCY: Federal Aviation... reportedly found on DA 42 Main Landing Gear (MLG) Damper-to-Trailing Arm joints during standard maintenance... DA 42 Main Landing Gear (MLG) Damper-to-Trailing Arm joints during standard maintenance. Depending on...

Summary of 2012 Reconsideration Public Comments and Responses for Industrial, Commercial, and Institutional Boilers at Area Sources: National Emission Standards for Hazardous Air Pollutants (NESHAP)

EPA Pesticide Factsheets

This page has a 12/2012 document that provides EPA’s responses to public comments on EPA’s Proposed National Emission Standards for Hazardous Air Pollutants for Area Sources: Industrial, Commercial, and Institutional Boilers and Process Heaters

Industry Interests in the HDTV Debate.

ERIC Educational Resources Information Center

Neil, Suzanne Chambliss

This analysis of the pattern of industrial interests in the current debate over high definition television systems argues that the debate involves more than just television; rather, it is an expression of a shift in the conceptualization of the nature of standards, one which conceives of standards as guidelines for the development of specific…

Report to NATEF Board of Trustees on Certification and Update Training.

ERIC Educational Resources Information Center

Shoemaker, Byrl R.

The automotive industry continues to be the only industry that has set national standards for vocational-technical education and certification programs that meet those standards. The certification program for automotive technician training has proved that it improves the quality of training in programs at secondary and postsecondary levels.…

Profiles of the National Industry Skills Standards Projects.

ERIC Educational Resources Information Center

Rahn, Mikala L., Comp.

In an effort to develop a more uniform and comprehensive system of national skill standards, the U.S. Departments of Education and Labor have awarded grants to 22 technical committees, composed of representatives from business, labor, and education, in a variety of industries and occupations. These projects will begin proposing national standards…

Assessment of Salient Beliefs Affecting Mothers’ Intention to Adherence to Dietary Diversity in their Children's Complementary Feeding

PubMed Central

Karimi-Shahanjarini, Akram; Rahmani, Fatemeh; Roshanei, Ghodratollah; Mahdi Hazavehei, Seyyed M.

2017-01-01

Background: Providing a variety of foods has been emphasized as one of the most important features of optimal complementary feeding. This study investigated key beliefs that guide mothers’ intention to adherence to dietary diversity in their 1–2-year-old children's complementary feeding. Methods: This was a cross-sectional study involving 290 mothers (mean age = 27, standard deviation = 5.32) with child 1–2-year-old attending maternal and child health section of health centers in Rasht, Iran. To represent the socioeconomic status of the participants, 6 centers out of 15 were selected from three different socioeconomic areas (low-, middle-, and high-income areas). Mothers completed a questionnaire assessing intention and belief-based items of theory of planned behavior. Correlations and multiple regression analyses were performed. Results: The mean age of mothers was 27 ± 5.33 (27–43 years). Regression analyses revealed that among behavioral beliefs, the perception that adherence to dietary diversity would lead to improve children's growth was the significant predictor of intention (β = 0.13, P = 0.04). Regarding normative beliefs, perceived social pressure from health-care professionals to adherence to dietary diversity significantly predicted intention (β = 0.15, P = 0.01). Among control beliefs, the perception that daily pressures made difficult adherence to dietary diversity was the key determinant (β = 0.19, P = 0.01). Conclusions: Findings of this study represent the important beliefs that can be addressed in development planning aimed at modifying mothers’ child complementary feeding practices. PMID:28479970

NREL Photovoltaic Program FY 1995 annual report

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1996-06-01

This report summarizes the in-house and subcontracted R&D activities from Oct. 1994 through Sept. 1995; their objectives are to conduct basic, applied, and engineering research, manage subcontracted R&D projects, perform research complementary to subcontracted work, develop and maintain state-of-the-art measurement and device capabilities, develop PV manufacturing technology and modules, transfer results to industry, and evolve viable partnerships for PV systems and market development. The research activities are grouped into 5 sections: crystalline Si and advanced devices, thin-film PV, PV manufacturing, PV module and system performance and engineering, and PV applications and market development.

Hot flashes severity, complementary and alternative medicine use, and self-rated health in women with breast cancer.

PubMed

Chandwani, Kavita D; Heckler, Charles E; Mohile, Supriya G; Mustian, Karen M; Janelsins, Michelle; Peppone, Luke J; Bushunow, Peter; Flynn, Patrick J; Morrow, Gary R

2014-01-01

Hot flashes (HF) are a common distressing symptom in women with breast cancer (BC). Current pharmacologic options are moderately effective and are associated with bothersome side effects. Complementary and alternative medicine is commonly used by cancer patients. However, information on the association of hot flashes severity with such use and self-rated health is lacking. To examine the hot flashes severity in women with breast cancer and its association with complementary and alternative medicine use and self-rated health (SRH). Longitudinal multicenter study to assess information needs of cancer outpatients. Patients with a diagnosis of breast cancer who were scheduled to undergo chemotherapy and/or radiotherapy. Hot flashes severity (0 = not present and 10 = as bad as you can imagine), use of complementary and alternative medicine (yes/no), and self-rating of health (SRH) status post-treatment and six-months thereafter (1-5, higher score = better SRH). The majority of women with HF (mean age = 54.4 years) were Caucasian and married, with higher education, and 93% had received surgical treatment for BC. At the end of treatment, 79% women reported experiencing HF [mean severity = 5.87, standard deviation (SD) = 2.9]; significantly more severe HF were reported by younger women with poor SRH, poor performance status, and those reporting doing spiritual practices. At follow-up, 73% had HF (mean severity = 4.86, SD = 3.0), and more severe HF were reported by younger women with poor self-rated health who had undergone chemotherapy plus radiotherapy, used vitamins, and did not exercise. A high percentage of women experienced hot flashes at the end of treatment and at six-month follow-up. A significant association of hot flashes severity with spiritual practice, increased vitamin use, and reduced exercise emphasize the need for future studies to confirm the results. This can facilitate safe use of complementary and alternative medicine and favorable outcomes while managing cancer-related hot flashes. Copyright © 2014 Elsevier Inc. All rights reserved.

40 CFR 63.1584 - When do I have to comply?

Code of Federal Regulations, 2010 CFR

2010-07-01

... Standards for Hazardous Air Pollutants: Publicly Owned Treatment Works Industrial Potw Treatment Plant Description and Requirements § 63.1584 When do I have to comply? (a) Existing industrial POTW treatment plant. If you have an existing industrial POTW treatment plant, the appropriate NESHAP(s) for the industrial...

40 CFR 403.13 - Variances from categorical pretreatment standards for fundamentally different factors.

Code of Federal Regulations, 2012 CFR

2012-07-01

... for fundamentally different factors. (a) Definition. The term Requester means an Industrial User or a... a certain Industrial User within an industrial category or subcategory. This will only be done if data specific to that Industrial User indicates it presents factors fundamentally different from those...

17 CFR 229.802 - Exchange Act industry guides.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 17 Commodity and Securities Exchanges 2 2010-04-01 2010-04-01 false Exchange Act industry guides. 229.802 Section 229.802 Commodity and Securities Exchanges SECURITIES AND EXCHANGE COMMISSION STANDARD... AND CONSERVATION ACT OF 1975-REGULATION S-K List of Industry Guides § 229.802 Exchange Act industry...

17 CFR 229.801 - Securities Act industry guides.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 17 Commodity and Securities Exchanges 2 2013-04-01 2013-04-01 false Securities Act industry guides. 229.801 Section 229.801 Commodity and Securities Exchanges SECURITIES AND EXCHANGE COMMISSION STANDARD... AND CONSERVATION ACT OF 1975-REGULATION S-K List of Industry Guides § 229.801 Securities Act industry...

17 CFR 229.802 - Exchange Act industry guides.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 17 Commodity and Securities Exchanges 2 2012-04-01 2012-04-01 false Exchange Act industry guides. 229.802 Section 229.802 Commodity and Securities Exchanges SECURITIES AND EXCHANGE COMMISSION STANDARD... AND CONSERVATION ACT OF 1975-REGULATION S-K List of Industry Guides § 229.802 Exchange Act industry...

17 CFR 229.801 - Securities Act industry guides.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 17 Commodity and Securities Exchanges 2 2011-04-01 2011-04-01 false Securities Act industry guides. 229.801 Section 229.801 Commodity and Securities Exchanges SECURITIES AND EXCHANGE COMMISSION STANDARD... AND CONSERVATION ACT OF 1975-REGULATION S-K List of Industry Guides § 229.801 Securities Act industry...

17 CFR 229.802 - Exchange Act industry guides.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 17 Commodity and Securities Exchanges 3 2014-04-01 2014-04-01 false Exchange Act industry guides. 229.802 Section 229.802 Commodity and Securities Exchanges SECURITIES AND EXCHANGE COMMISSION STANDARD... AND CONSERVATION ACT OF 1975-REGULATION S-K List of Industry Guides § 229.802 Exchange Act industry...

17 CFR 229.802 - Exchange Act industry guides.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 17 Commodity and Securities Exchanges 2 2013-04-01 2013-04-01 false Exchange Act industry guides. 229.802 Section 229.802 Commodity and Securities Exchanges SECURITIES AND EXCHANGE COMMISSION STANDARD... AND CONSERVATION ACT OF 1975-REGULATION S-K List of Industry Guides § 229.802 Exchange Act industry...

17 CFR 229.801 - Securities Act industry guides.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 17 Commodity and Securities Exchanges 2 2012-04-01 2012-04-01 false Securities Act industry guides. 229.801 Section 229.801 Commodity and Securities Exchanges SECURITIES AND EXCHANGE COMMISSION STANDARD... AND CONSERVATION ACT OF 1975-REGULATION S-K List of Industry Guides § 229.801 Securities Act industry...

17 CFR 229.801 - Securities Act industry guides.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 17 Commodity and Securities Exchanges 3 2014-04-01 2014-04-01 false Securities Act industry guides. 229.801 Section 229.801 Commodity and Securities Exchanges SECURITIES AND EXCHANGE COMMISSION STANDARD... AND CONSERVATION ACT OF 1975-REGULATION S-K List of Industry Guides § 229.801 Securities Act industry...

17 CFR 229.802 - Exchange Act industry guides.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 17 Commodity and Securities Exchanges 2 2011-04-01 2011-04-01 false Exchange Act industry guides. 229.802 Section 229.802 Commodity and Securities Exchanges SECURITIES AND EXCHANGE COMMISSION STANDARD... AND CONSERVATION ACT OF 1975-REGULATION S-K List of Industry Guides § 229.802 Exchange Act industry...

The Education "Industry" in Africa.

ERIC Educational Resources Information Center

Kraft, Richard J.

Education, according to various established criteria, can be classified as an industry, and in many African nations, it is the largest industry. Yet, when judged by standard measures of industrial success, such as whether the economic outcomes justify the amount spent, the answer is generally no. The thesis that most African nations are attempting…

Study on Laws, Regulations and Standards on Energy Efficiency, Energy Conserving and Emission Reduction of Industrial Boilers in EU

NASA Astrophysics Data System (ADS)

Liu, Ren; Zhao, Yuejin; Chen, Haihong; Liang, Xiuying; Yang, Ming

2017-12-01

Industrial boilers are widely applied in such fields as factory power, building heating, and people’s lives; China is the world’s largest producer and user of industrial boilers, with very high annual energy consumption; clear requirements have been put forward by China on the energy efficiency since the “11th Five-year Plan” with the hope to save energy and reduce emission by means of energy efficiency standards and regulations on the supervision and control of various special equipment. So far, the energy efficiency of industrial boilers in China has been improved significantly but there is still a gap with the EU states. This paper analyzes the policies of energy efficiency, implementation models and methods of supervision and implementation at the EU level from laws, regulations, directives as well as standards; the paper also puts forward suggestions of energy conserving and emission reduction on the improvement of energy conserving capacity of industrial boilers in China through studying the legislations and measures of the developed countries in energy conserving of boilers.

Coding of DNA samples and data in the pharmaceutical industry: current practices and future directions--perspective of the I-PWG.

PubMed

Franc, M A; Cohen, N; Warner, A W; Shaw, P M; Groenen, P; Snapir, A

2011-04-01

DNA samples collected in clinical trials and stored for future research are valuable to pharmaceutical drug development. Given the perceived higher risk associated with genetic research, industry has implemented complex coding methods for DNA. Following years of experience with these methods and with addressing questions from institutional review boards (IRBs), ethics committees (ECs) and health authorities, the industry has started reexamining the extent of the added value offered by these methods. With the goal of harmonization, the Industry Pharmacogenomics Working Group (I-PWG) conducted a survey to gain an understanding of company practices for DNA coding and to solicit opinions on their effectiveness at protecting privacy. The results of the survey and the limitations of the coding methods are described. The I-PWG recommends dialogue with key stakeholders regarding coding practices such that equal standards are applied to DNA and non-DNA samples. The I-PWG believes that industry standards for privacy protection should provide adequate safeguards for DNA and non-DNA samples/data and suggests a need for more universal standards for samples stored for future research.

Amoeba-related health risk in drinking water systems: could monitoring of amoebae be a complementary approach to current quality control strategies?

PubMed

Codony, Francesc; Pérez, Leonardo Martín; Adrados, Bárbara; Agustí, Gemma; Fittipaldi, Mariana; Morató, Jordi

2012-01-01

Culture-based methods for fecal indicator microorganisms are the standard protocol to assess potential health risk from drinking water systems. However, these traditional fecal indicators are inappropriate surrogates for disinfection-resistant fecal pathogens and the indigenous pathogens that grow in drinking water systems. There is now a range of molecular-based methods, such as quantitative PCR, which allow detection of a variety of pathogens and alternative indicators. Hence, in addition to targeting total Escherichia coli (i.e., dead and alive) for the detection of fecal pollution, various amoebae may be suitable to indicate the potential presence of pathogenic amoeba-resisting microorganisms, such as Legionellae. Therefore, monitoring amoeba levels by quantitative PCR could be a useful tool for directly and indirectly evaluating health risk and could also be a complementary approach to current microbial quality control strategies for drinking water systems.

Sensitization of Candida albicans to terbinafine by berberine and berberrubine

PubMed Central

LAM, PIKLING; KOK, STANTON HON LUNG; LEE, KENNETH KA HO; LAM, KIM HUNG; HAU, DESMOND KWOK PO; WONG, WAI YEUNG; BIAN, ZHAOXIANG; GAMBARI, ROBERTO; CHUI, CHUNG HIN

2016-01-01

Candida albicans (C. albicans) is an opportunistic fungal pathogen, particularly observed in immunocompromised patients. C. albicans accounts for 50–70% of cases of invasive candidiasis in the majority of clinical settings. Terbinafine, an allylamine antifungal drug, has been used to treat fungal infections previously. It has fungistatic activity against C. albicans. Traditional Chinese medicines can be used as complementary medicines to conventional drugs to treat a variety of ailments and diseases. Berberine is a quaternary alkaloid isolated from the traditional Chinese herb, Coptidis Rhizoma, while berberrubine is isolated from the medicinal plant Berberis vulgaris, but is also readily derived from berberine by pyrolysis. The present study demonstrates the possible complementary use of berberine and berberrubine with terbinafine against C. albicans. The experimental findings assume that the potential application of these alkaloids together with reduced dosage of the standard drug would enhance the resulting antifungal potency. PMID:27073630

Complementary Barrier Infrared Detector (CBIRD) with Double Tunnel Junction Contact and Quantum Dot Barrier Infrared Detector (QD-BIRD)

NASA Technical Reports Server (NTRS)

Ting, David Z.-Y; Soibel, Alexander; Khoshakhlagh, Arezou; Keo, Sam A.; Nguyen, Jean; Hoglund, Linda; Mumolo, Jason M.; Liu, John K.; Rafol, Sir B.; Hill, Cory J.;

77 FR 4522 - National Emission Standards for Hazardous Air Pollutants for Chemical Manufacturing Area Sources

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-30

... Manufacturing, Industrial Organic Chemical Manufacturing, Inorganic Pigments Manufacturing, Miscellaneous Organic Chemical Manufacturing, Plastic Materials and Resins Manufacturing, Pharmaceutical Production and... Intermediate Production, Industrial Inorganic Chemical Manufacturing, Industrial Organic Chemical Manufacturing...

77 FR 28927 - Energy Conservation Program for Certain Industrial Equipment: Energy Conservation Standards and...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-16

...The U.S. Department of Energy (DOE) is amending its energy conservation standards for small, large, and very large water-cooled and evaporatively-cooled commercial package air conditioners, and variable refrigerant flow (VRF) water-source heat pumps less than 17,000 Btu/h. DOE is adopting new energy conservation standards for computer room air conditioners and VRF water-source heat pumps with a cooling capacity at or greater than 135,000 Btu/h and less than 760,000 Btu/h. Pursuant to the Energy Policy and Conservation Act of 1975 (EPCA), as amended, DOE must assess whether the uniform national standards for these covered equipment need to be updated each time the corresponding industry standard--the American National Standards Institute (ANSI)/American Society of Heating, Refrigerating, and Air- Conditioning Engineers (ASHRAE)/Illuminating Engineering Society of North America (IESNA) Standard 90.1 (ASHRAE Standard 90.1)--is amended, which most recently occurred on October 29, 2010. The levels DOE is adopting are the same as the efficiency levels specified in ASHRAE Standard 90.1-2010. DOE has determined that the ASHRAE Standard 90.1- 2010 efficiency levels for the equipment types listed above are more stringent than existing Federal energy conservation standards and will result in economic and energy savings compared existing energy conservation standards. Furthermore, DOE has concluded that clear and convincing evidence does not exist, as would justify more-stringent standard levels than the efficiency levels in ASHRAE Standard 90.1-2010 for any of the equipment classes. DOE is also updating the current Federal test procedures or, for certain equipment, adopting new test procedures to incorporate by reference the most current versions of the relevant industry test procedures specified in ASHRAE Standard 90.1- 2010. Furthermore, DOE is adopting additional test procedure provisions to include with modification certain instructions from Air- Conditioning, Heating, and Refrigeration Institute (AHRI) operations manuals in that organization's test procedures that would clarify the application of the DOE test procedures and harmonize DOE testing with the testing performed by industry.

77 FR 13359 - The Cadmium in General Industry Standard; Extension of the Office of Management and Budget's (OMB...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-06

... Industry Standard protect workers from the adverse health effects that may result from their exposure to... OSHA, the National Institute for Occupational Safety and Health, the worker who is the subject of the... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2012-0005] The...

Bricklayer: Apprenticeship Course Outline. Apprenticeship and Industry Training. 0110

ERIC Educational Resources Information Center

Alberta Advanced Education and Technology, 2010

2010-01-01

The graduate of the Bricklayer apprenticeship training is a journeyperson who will be able to: (1) responsibly do all work tasks expected of a journeyperson; (2) supervise, train and coach apprentices; (3) produce a better quality product than the minimum acceptable by industry standard; (4) use and maintain tools and equipment to the standards of…

Bricklayer: Apprenticeship Course Outline. Apprenticeship and Industry Training. 0110.1

ERIC Educational Resources Information Center

Alberta Advanced Education and Technology, 2010

2010-01-01

The graduate of the Bricklayer apprenticeship training is a journeyperson who will be able to: (1) responsibly do all work tasks expected of a journeyperson; (2) supervise, train and coach apprentices; (3) produce a better quality product than the minimum acceptable by industry standard; (4) use and maintain tools and equipment to the standards of…

External Confirmation of Adherence to Standards: As Applicable to Academic Programmes as to Business and Industry

ERIC Educational Resources Information Center

Hughey, Aaron W.; Burke, Monica G.

2010-01-01

The development of, and adherence to, performance standards is imperative for success in today's competitive global market. This is as true for academic programmes in higher education as it is for the manufacturing and service sectors. Just like their counterparts in business and industry, it is important that graduate career preparation…

Oil and Natural Gas Industry Sources Covered by the 2012 New Source Performance Standards (NSPS) for Volatile Organic Compounds (VOCs) and the 2016 NSPS for Methane and VOCs, by Site

EPA Pesticide Factsheets

This is a 2016 table that looks at oil and natural gas industry site types and lists the applicable rules for the 2012 and 2016 new source performance standards (NSPS) and Volatile Organic Compounds (VOC) rules.

Occupational Skill Standards. Experience Shows Industry Involvement To Be Key. Testimony before the Committee on Labor and Human Resources, U.S. Senate.

ERIC Educational Resources Information Center

Morra, Linda G.

A study reviewed eight standards and certification systems for occupations that required less than a bachelor's degree for entry-level employment. Common elements among systems included industry ownership and control, recertification requirements to keep certificate holders' skills current, national portability of credentials, and integration of…

Can Industrial-Organizational Psychology Survive the Advancement of Professional Psychology? Speciality Standards for Providers of I/O Psychological Services.

ERIC Educational Resources Information Center

Tice, Thomas E.

The Revised Standards for Providers of Psychological Services, developed by a committee of the American Psychological Association, have an important impact on industrial/organizational psychologists. Currently, four types of controls exist as assurances to the public that appropriate psychological services are being provided. They are: graduate…

Do You Take Credit Cards? Security and Compliance for the Credit Card Payment Industry

ERIC Educational Resources Information Center

Willey, Lorrie; White, Barbara Jo

2013-01-01

Security is a significant concern in business and in information systems (IS) education from both a technological and a strategic standpoint. Students can benefit from the study of information systems security when security concepts are introduced in the context of real-world industry standards. The development of a data security standard for…

Through the Past Decade: How Advanced Energy Design Guides have influenced the Design Industry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liu, Bing; Athalye, Rahul A.

Advanced Energy Design Guides (AEDGs) were originally developed intended to provide a simple approach to building professionals seeking energy efficient building designs better than ASHRAE Standard 90.1. Since its first book was released in 2004, the AEDG series provided inspiration for the design industry and were seen by designers as a starting point for buildings that wished to go beyond minimum codes and standards. In addition, U.S. Department of Energy’s successful Commercial Building Partnerships (CBP) program leveraged many of the recommendations from the AEDGs to achieve 50% energy savings over ASHRAE Standard 90.1-2004 for prototypical designs of large commercial entitiesmore » in the retail, banking and lodging sectors. Low-energy technologies and strategies developed during the CBP process have been applied by commercial partners throughout their national portfolio of buildings. Later, the AEDGs served as the perfect platform for both Standard 90.1 and ASHRAE’s high performance buildings standard, Standard 189.1. What was high performance a few years ago, however, has become minimum code today. Indeed, most of the prescriptive envelope component requirements in ASHRAE Standard 90.1-2013 are values recommended in the 50% AEDGs several years ago. Similarly, AEDG strategies and recommendations have penetrated the lighting and HVAC sections of both Standard 189.1 and Standard 90.1. Finally, as we look to the future of codes and standards, the AEDGs are serving as a blueprint for how minimum code requirements could be expressed. By customizing codes to specific building types, design strategies tailored for individual buildings could be prescribed as minimum code, just like in the AEDGs. This paper describes the impact that AEDGs have had over the last decade on the design industry and how they continue to influence the future of codes and Standards. From design professionals to code officials, everyone in the building industry has been affected by the AEDGs.« less

Design and evaluation of basic standard encryption algorithm modules using nanosized complementary metal oxide semiconductor molecular circuits

NASA Astrophysics Data System (ADS)

Masoumi, Massoud; Raissi, Farshid; Ahmadian, Mahmoud; Keshavarzi, Parviz

2006-01-01

We are proposing that the recently proposed semiconductor-nanowire-molecular architecture (CMOL) is an optimum platform to realize encryption algorithms. The basic modules for the advanced encryption standard algorithm (Rijndael) have been designed using CMOL architecture. The performance of this design has been evaluated with respect to chip area and speed. It is observed that CMOL provides considerable improvement over implementation with regular CMOS architecture even with a 20% defect rate. Pseudo-optimum gate placement and routing are provided for Rijndael building blocks and the possibility of designing high speed, attack tolerant and long key encryptions are discussed.