SPARTNIK: Engineering catalyst for government and industry

NASA Astrophysics Data System (ADS)

Prass, James D.; Romano, Thomas C.; Hunter, Jeanine M.

1995-09-01

Industrial demands for highly motivated and competent technical personnel to carry forward with the technological goals of the US has posed a significant challenge to graduating engineers. While curricula has improved and diversified over time to meet these industry demands, relevant industry experience is not always available to undergraduates. The microsatellite development program at San Jose State University (SJSU) has allowed an entire undergraduate senior class to utilize a broad range of training and education to refine their engineering skills, bringing them closer to becoming engineering professionals. Close interaction with industry mentors and manufacturers on a real world project provides a significant advantage to educators and students alike. With support from companies and government agencies, the students have designed and manufactured a microsatellite, designed to be launched into a low Earth orbit. This satellite will gather telemetry for characterizing the state of the spacecraft. This will enable the students to have a physical check on their predicted value of spacecraft subsystem performance. Additional experiments will also be undertaken during the two year lifetime, including micro-meteorite impact sensing and capturing digital color images of the Earth. This paper will detail the process whereby students designed, prototype and manufactured a small satellite in a large team environment, along with the experiments that will be performed on board. With the project's limited funds, it needed the support of many industry companies to help with technical issues and hardware acquisition. Among the many supporting companies, NASA's space shuttle small payloads program could be used for an affordable launch vehicle for the student project. The paper address these collaborations between the student project and industry support, as well as explaining the benefits to both. The paper draws conclusion on how these types of student projects can be used by industry as a feasible resource for developing small platforms for space based experiments, as well as increasing the practical experience and engineering knowledge of graduating students. These benefits to industry and universities, can lead to a close working relationship between the two. These types of projects can facilitate the development of low-cost space rated parts to be used by the industry and university projects. It can also help with the understanding and use of acceptable risk non-space rated parts reducing the cost of the spacecraft. This will lead to the development of low cost platforms for space based experiments, providing research companies an inexpensive, long duration platform to conduct their in-space experiments, while better preparing engineering undergraduates for their transition into the work force.

NASA support for commerce in space - Broadening opportunities

NASA Technical Reports Server (NTRS)

Stone, Barbara A.; Livingston, Candace D.

1989-01-01

The status of the NASA Office of Commercial Program's initiatives to implement the 1988 commercial space policy and expand industrial interest in the commercial development of space in the post-Challenger era is presented. Specific objectives have been developed to capture the drive and creativity of the private sector, for increasing NASA's effectiveness in conducting business with industrial firms, and impacting the commercial space market. An aggressive, comprehensive, and forward-looking program has been defined which provides the type of infrastructure and organization required to bring industry into the mainstream of space activities.

Knowledge, Beliefs and Attitudes of Patients and the General Public towards the Interactions of Physicians with the Pharmaceutical and the Device Industry: A Systematic Review.

PubMed

Fadlallah, Racha; Nas, Hala; Naamani, Dana; El-Jardali, Fadi; Hammoura, Ihsan; Al-Khaled, Lina; Brax, Hneine; Kahale, Lara; Akl, Elie A

2016-01-01

To systematically review the evidence on the knowledge, beliefs, and attitudes of patients and the general public towards the interactions of physicians with the pharmaceutical and the device industry. We included quantitative and qualitative studies addressing any type of interactions between physicians and the industry. We searched MEDLINE and EMBASE in August 2015. Two reviewers independently completed data selection, data extraction and assessment of methodological features. We summarized the findings narratively stratified by type of interaction, outcome and country. Of the 11,902 identified citations, 20 studies met the eligibility criteria. Many studies failed to meet safeguards for protecting from bias. In studies focusing on physicians and the pharmaceutical industry, the percentages of participants reporting awareness was higher for office-use gifts relative to personal gifts. Also, participants were more accepting of educational and office-use gifts compared to personal gifts. The findings were heterogeneous for the perceived effects of physician-industry interactions on prescribing behavior, quality and cost of care. Generally, participants supported physicians' disclosure of interactions through easy-to-read printed documents and verbally. In studies focusing on surgeons and device manufacturers, the majority of patients felt their care would improve or not be affected if surgeons interacted with the device industry. Also, they felt surgeons would make the best choices for their health, regardless of financial relationship with the industry. Participants generally supported regulation of surgeon-industry interactions, preferably through professional rather than governmental bodies. The awareness of participants was low for physicians' receipt of personal gifts. Participants also reported greater acceptability and fewer perceived influence for office-use gifts compared to personal gifts. Overall, there appears to be lower awareness, less concern and more acceptance of surgeon-device industry interactions relative to physician-pharmaceutical industry interactions. We discuss the implications of the findings at the patient, provider, organizational, and systems level.

Knowledge, Beliefs and Attitudes of Patients and the General Public towards the Interactions of Physicians with the Pharmaceutical and the Device Industry: A Systematic Review

PubMed Central

Fadlallah, Racha; Nas, Hala; Naamani, Dana; El-Jardali, Fadi; Hammoura, Ihsan; Al-Khaled, Lina; Brax, Hneine; Kahale, Lara; Akl, Elie A.

2016-01-01

Objective To systematically review the evidence on the knowledge, beliefs, and attitudes of patients and the general public towards the interactions of physicians with the pharmaceutical and the device industry. Methods We included quantitative and qualitative studies addressing any type of interactions between physicians and the industry. We searched MEDLINE and EMBASE in August 2015. Two reviewers independently completed data selection, data extraction and assessment of methodological features. We summarized the findings narratively stratified by type of interaction, outcome and country. Results Of the 11,902 identified citations, 20 studies met the eligibility criteria. Many studies failed to meet safeguards for protecting from bias. In studies focusing on physicians and the pharmaceutical industry, the percentages of participants reporting awareness was higher for office-use gifts relative to personal gifts. Also, participants were more accepting of educational and office-use gifts compared to personal gifts. The findings were heterogeneous for the perceived effects of physician-industry interactions on prescribing behavior, quality and cost of care. Generally, participants supported physicians’ disclosure of interactions through easy-to-read printed documents and verbally. In studies focusing on surgeons and device manufacturers, the majority of patients felt their care would improve or not be affected if surgeons interacted with the device industry. Also, they felt surgeons would make the best choices for their health, regardless of financial relationship with the industry. Participants generally supported regulation of surgeon-industry interactions, preferably through professional rather than governmental bodies. Conclusion The awareness of participants was low for physicians’ receipt of personal gifts. Participants also reported greater acceptability and fewer perceived influence for office-use gifts compared to personal gifts. Overall, there appears to be lower awareness, less concern and more acceptance of surgeon-device industry interactions relative to physician-pharmaceutical industry interactions. We discuss the implications of the findings at the patient, provider, organizational, and systems level. PMID:27556929

Can Applying Organic and Industry Best Practices Improve Foreign Military Sales Supportability

DTIC Science & Technology

2009-10-01

time away Specific dollar amount of non-specified items Lead time away Allows DoD to stock forecasted items for future country needs Allows issuing of...items from stock Result is requisitions filled less than lead time away FIGuRE 3. THREE TYPES OF FMS SPARES SuPPORT MODELS (AIR FORCE SECuRITY...DoD stock (DISAM, 2007). The logistical element of supply support, which in this instance includes the art of forecasting and spares support approach

Impact of Postapproval Evidence Generation on the Biopharmaceutical Industry.

PubMed

Milne, Christopher-Paul; Cohen, Joshua P; Felix, Abigail; Chakravarthy, Ranjana

2015-08-01

Meeting marketplace demands for proving the value of new products requires more data than the industry has routinely produced. These data include evidence from comparative effectiveness research (CER), including randomized, controlled trials; pragmatic clinical trials; observational studies; and meta-analyses. We designed and conducted a survey to examine the industry's perceptions on new data requirements regarding CER evidence, the acceptability of postapproval study types, payer-specific issues related to CER, communication of data being generated postapproval, and methods used for facilitating postapproval evidence generation. CER is being used by payers for most types of postapproval decisions. Randomized, controlled trials were indicated as the most acceptable form of evidence. At the same time, there was support for the utility of other types of studies, such as pragmatic clinical trials and observational studies. Respondents indicated the use of multiple formats for communicating postapproval data with many different stakeholders including regulators, payers, providers, and patients. Risk-sharing agreements with payers were unanimously supported by respondents with regard to certain products with unclear clinical and economic outcomes at launch. In these instances, conditional reimbursement through coverage with evidence development was considered a constructive option. The Food and Drug Administration's initiative called Regulatory Science was considered by the respondents as having the most impact on streamlining the generation of postapproval research-related evidence. The biopharmaceutical industry is faced with a broad and complex set of challenges related to evidence generation for postapproval decisions by a variety of health care system stakeholders. Uncertainty remains as to how the industry and payers use postapproval studies to guide decision making with regard to pricing and reimbursement status. Correspondingly, there is uncertainty regarding whether the industry's investment in CER will have a positive return on investment in terms of reimbursement and market access. Copyright © 2015 Elsevier HS Journals, Inc. All rights reserved.

Advocates, interest groups and Australian news coverage of alcohol advertising restrictions: content and framing analysis

PubMed Central

2012-01-01

Background Legislating restrictions on alcohol advertising is a cost-effective measure to reduce consumption of alcohol. Yet Australia relies upon industry self-regulation through voluntary codes of practice regarding the content, timing and placement of alcohol advertising. Ending industry self-regulation was recommended by the National Preventative Health Taskforce; a suggestion contested by the drinks industry. Debates about emerging alcohol-control policies regularly play out in the news media, with various groups seeking to influence the discussion. This paper examines news coverage of recommendations to restrict alcohol advertising to see how supporters and opponents frame the debate, with a view to providing some suggestions for policy advocates to advance the discussion. Methods We used content and framing analyses to examine 329 Australian newspaper items mentioning alcohol advertising restrictions over 24 months. All items were coded for mentions of specific types of advertising and types of advertising restrictions, the presence of news frames that opposed or endorsed advertising restrictions, statements made within each frame and the news-actors who appeared. Results Restrictions were the main focus in only 36% of 329 items. Alcohol advertising was conceived of as television (47%) and sport-related (56%). Restrictions were mentioned in non-specific terms (45%), or specified as restrictions on timing and placement (49%), or content (22%). Public health professionals (47%) appeared more frequently than drinks industry representatives (18%). Five supportive news frames suggested the policy is a sensible public health response, essential to protect children, needed to combat the drinks industry, required to stop pervasive branding, or as only an issue in sport. Four unsupportive frames positioned restrictions as unnecessary for a responsible industry, an attack on legitimate commercial activities, ineffective and ‘nannyist’, or inessential to government policy. Support varied among news-actors, with public health professionals (94%) more supportive than the public (68%), community-based organisations (76%), the government (72%), and the sports (16%), drinks (3%), or advertising (4%) industries. Conclusion Restrictions on alcohol advertising currently have low newsworthiness as a standalone issue. Future advocacy might better define the exact nature of required restrictions, anticipate vocal opposition and address forms of advertising beyond televised sport if exposure to advertising, especially among children, is to be reduced. PMID:22938674

Industrial machinery noise impact modeling, volume 1

NASA Astrophysics Data System (ADS)

Hansen, C. H.; Kugler, B. A.

1981-07-01

The development of a machinery noise computer model which may be used to assess the effect of occupational noise on the health and welfare of industrial workers is discussed. The purpose of the model is to provide EPA with the methodology to evaluate the personnel noise problem, to identify the equipment types responsible for the exposure and to assess the potential benefits of a given noise control action. Due to its flexibility in design and application, the model and supportive computer program can be used by other federal agencies, state governments, labor and industry as an aid in the development of noise abatement programs.

78 FR 53736 - Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-30

...: Title, Associated Form and OMB Number: Defense Industrial Base Cyber Security/Information Assurance (DIB CS/IA) Cyber Incident Reporting; OMB Control Number 0704-0489. Type of Request: Reinstatement without.... The requested information supports the collaborative cyber threat information sharing and incident...

Health Care Evolution Is Driving Staffing Industry Transformation.

PubMed

Faller, Marcia; Gogek, Jim

2016-01-01

The powerful transformation in the health care industry is reshaping not only patient care delivery and the business of health care but also demanding new strategies from vendors who support the health care system. These new strategies may be most evident in workforce solutions and health care staffing services. Consolidation of the health care industry has created increased demand for these types of services. Accommodating a changing workforce and related pressures resulting from health care industry transformation has produced major change within the workforce solutions and staffing services sector. The effect of the growth strategy of mergers, acquisitions, and organic development has revealed organizational opportunities such as expanding capacity for placing physicians, nurses, and allied professionals, among other workforce solutions. This article shares insights into workforce challenges and solutions throughout the health care industry.

Disclosures of Conflicts of Interest in Psychiatric Review Articles

PubMed Central

Kopelman, Andrew M.; Gorelick, David A.; Appelbaum, Paul S.

2013-01-01

To characterize disclosures of conflicts of interest in review articles in psychiatry, we identified 285 reviews from ten high-impact journals in psychiatry and two in general medicine. Disclosures were reliably coded as biotech/pharmaceutical/other material interests, nonprofit/government, communication companies, or other. Authors in both types of journals frequently reported industry ties. However, reviews in psychiatric journals were significantly less likely to include industry-related disclosures (32% of reviews; 18% of authors) compared with general medical journals (64% of articles; 40% of authors). The most common types of industry-related disclosures were for consulting, research support, and speaking fees. Disclosures appeared to be of limited utility in helping readers assess possible biases, because the nature and extent of the relationship being disclosed was often unclear. Efforts to screen out authors with significant financial relationships pertaining to the topic under review may be more effective than disclosure in protecting the integrity of the medical literature. PMID:23364114

Safety at work: a meta-analytic investigation of the link between job demands, job resources, burnout, engagement, and safety outcomes.

PubMed

Nahrgang, Jennifer D; Morgeson, Frederick P; Hofmann, David A

2011-01-01

In this article, we develop and meta-analytically test the relationship between job demands and resources and burnout, engagement, and safety outcomes in the workplace. In a meta-analysis of 203 independent samples (N = 186,440), we found support for a health impairment process and for a motivational process as mechanisms through which job demands and resources relate to safety outcomes. In particular, we found that job demands such as risks and hazards and complexity impair employees' health and positively relate to burnout. Likewise, we found support for job resources such as knowledge, autonomy, and a supportive environment motivating employees and positively relating to engagement. Job demands were found to hinder an employee with a negative relationship to engagement, whereas job resources were found to negatively relate to burnout. Finally, we found that burnout was negatively related to working safely but that engagement motivated employees and was positively related to working safely. Across industries, risks and hazards was the most consistent job demand and a supportive environment was the most consistent job resource in terms of explaining variance in burnout, engagement, and safety outcomes. The type of job demand that explained the most variance differed by industry, whereas a supportive environment remained consistent in explaining the most variance in all industries.

76 FR 16037 - Proposed Collection; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-22

... Treasury, is soliciting comments concerning data collection to support the Capacity Building Initiative. The CDFI Fund intends to collect data on the CDFI industry's needs for different training and...-building on specific topics, the type of content to be provided, and the target audience for specific...

High burden of invasive β-haemolytic streptococcal infections in Fiji

PubMed Central

STEER, A. C.; JENNEY, A. J. W.; OPPEDISANO, F.; BATZLOFF, M. R.; HARTAS, J.; PASSMORE, J.; RUSSELL, F. M.; KADO, J. H. H.; CARAPETIS, J. R.

2008-01-01

SUMMARY We undertook a 5-year retrospective study of group A streptococcal (GAS) bacteraemia in Fiji, supplemented by a 9-month detailed retrospective study of β-haemolytic streptococcal (BHS) infections. The all-age incidence of GAS bacteraemia over 5 years was 11·6/100 000. Indigenous Fijians were 4·7 times more likely to present with invasive BHS disease than people of other ethnicities, and 6·4 times more likely than Indo-Fijians. The case-fatality rate for invasive BHS infections was 28%. emm-typing was performed on 23 isolates: 17 different emm-types were found, and the emm-type profile was different from that found in industrialized nations. These data support the contentions that elevated rates of invasive BHS and GAS infections are widespread in developing countries, and that the profile of invasive organisms in these settings reflects a wide diversity of emm-types and a paucity of types typically found in industrialized countries. PMID:17631691

Potential Applications of Carbohydrases Immobilization in the Food Industry

PubMed Central

Contesini, Fabiano Jares; de Alencar Figueira, Joelise; Kawaguti, Haroldo Yukio; de Barros Fernandes, Pedro Carlos; de Oliveira Carvalho, Patrícia; Nascimento, Maria da Graça; Sato, Hélia Harumi

2013-01-01

Carbohydrases find a wide application in industrial processes and products, mainly in the food industry. With these enzymes, it is possible to obtain different types of sugar syrups (viz. glucose, fructose and inverted sugar syrups), prebiotics (viz. galactooligossacharides and fructooligossacharides) and isomaltulose, which is an interesting sweetener substitute for sucrose to improve the sensory properties of juices and wines and to reduce lactose in milk. The most important carbohydrases to accomplish these goals are of microbial origin and include amylases (α-amylases and glucoamylases), invertases, inulinases, galactosidases, glucosidases, fructosyltransferases, pectinases and glucosyltransferases. Yet, for all these processes to be cost-effective for industrial application, a very efficient, simple and cheap immobilization technique is required. Immobilization techniques can involve adsorption, entrapment or covalent bonding of the enzyme into an insoluble support, or carrier-free methods, usually based on the formation of cross-linked enzyme aggregates (CLEAs). They include a broad variety of supports, such as magnetic materials, gums, gels, synthetic polymers and ionic resins. All these techniques present advantages and disadvantages and several parameters must be considered. In this work, the most recent and important studies on the immobilization of carbohydrases with potential application in the food industry are reviewed. PMID:23344046

Novel Overhang Support Designs for Powder-Based Electron Beam Additive Manufacturing (EBAM)

NASA Technical Reports Server (NTRS)

Nabors, Sammy A.

2014-01-01

NASA Marshall Space Flight Center, in collaboration with the University of Alabama, has developed a contact-free support structure used to fabricate overhang-type geometries via EBAM. The support structure is used for 3-D metal-printed components for the aerospace, automotive, biomedical and other industries. Current techniques use support structures to address deformation challenges inherent in 3-D metal printing. However, these structures (overhangs) are bonded to the component and need to be removed in post-processing using a mechanical tool. This new technology improves the overhang support structure design for components by eliminating associated geometric defects and post-processing requirements.

Evolution of Incubation Models: Evidence from the Italian Incubation Industry

ERIC Educational Resources Information Center

Grandi, Alessandro; Grimaldi, Rosa

2004-01-01

This paper addresses the role of incubators in supporting new venture creation. A mapping of four different types of incubator is proposed: corporate private incubators (CPIs), independent private incubators (IPIs), business innovation centres (BICs) and university business incubators (UBIs). This mapping is exemplified through case studies of one…

76 FR 36078 - Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-21

... type of feedback from producer and other to enhance future studies and ensure that the informational... assumptions used; (c) ways to enhance the quality, utility and clarity of the information to be collected; (d... on producer and industry support. The NAHMS Program is committed to improving the value of studies...

Relationship between funding source and conclusion among nutrition-related scientific articles.

PubMed

Lesser, Lenard I; Ebbeling, Cara B; Goozner, Merrill; Wypij, David; Ludwig, David S

2007-01-01

Industrial support of biomedical research may bias scientific conclusions, as demonstrated by recent analyses of pharmaceutical studies. However, this issue has not been systematically examined in the area of nutrition research. The purpose of this study is to characterize financial sponsorship of scientific articles addressing the health effects of three commonly consumed beverages, and to determine how sponsorship affects published conclusions. Medline searches of worldwide literature were used to identify three article types (interventional studies, observational studies, and scientific reviews) about soft drinks, juice, and milk published between 1 January, 1999 and 31 December, 2003. Financial sponsorship and article conclusions were classified by independent groups of coinvestigators. The relationship between sponsorship and conclusions was explored by exact tests and regression analyses, controlling for covariates. 206 articles were included in the study, of which 111 declared financial sponsorship. Of these, 22% had all industry funding, 47% had no industry funding, and 32% had mixed funding. Funding source was significantly related to conclusions when considering all article types (p = 0.037). For interventional studies, the proportion with unfavorable conclusions was 0% for all industry funding versus 37% for no industry funding (p = 0.009). The odds ratio of a favorable versus unfavorable conclusion was 7.61 (95% confidence interval 1.27 to 45.73), comparing articles with all industry funding to no industry funding. Industry funding of nutrition-related scientific articles may bias conclusions in favor of sponsors' products, with potentially significant implications for public health.

Industrial Facility Combustion Energy Use

DOE Data Explorer

McMillan, Colin

2016-08-01

Facility-level industrial combustion energy use is calculated from greenhouse gas emissions data reported by large emitters (>25,000 metric tons CO2e per year) under the U.S. EPA's Greenhouse Gas Reporting Program (GHGRP, https://www.epa.gov/ghgreporting). The calculation applies EPA default emissions factors to reported fuel use by fuel type. Additional facility information is included with calculated combustion energy values, such as industry type (six-digit NAICS code), location (lat, long, zip code, county, and state), combustion unit type, and combustion unit name. Further identification of combustion energy use is provided by calculating energy end use (e.g., conventional boiler use, co-generation/CHP use, process heating, other facility support) by manufacturing NAICS code. Manufacturing facilities are matched by their NAICS code and reported fuel type with the proportion of combustion fuel energy for each end use category identified in the 2010 Energy Information Administration Manufacturing Energy Consumption Survey (MECS, http://www.eia.gov/consumption/manufacturing/data/2010/). MECS data are adjusted to account for data that were withheld or whose end use was unspecified following the procedure described in Fox, Don B., Daniel Sutter, and Jefferson W. Tester. 2011. The Thermal Spectrum of Low-Temperature Energy Use in the United States, NY: Cornell Energy Institute.

Disclosures of conflicts of interest in psychiatric review articles.

PubMed

Kopelman, Andrew M; Gorelick, David A; Appelbaum, Paul S

2013-02-01

To characterize disclosures of conflicts of interest in review articles in psychiatry, we identified 285 reviews from 10 high-impact journals in psychiatry and 2 in general medicine. Disclosures were reliably coded as biotechnology/pharmaceutical/other material interests, nonprofit/government, communication companies, or other. The authors in both types of journals frequently reported industry ties. However, the reviews in the psychiatric journals were significantly less likely to include industry-related disclosures (32% of the reviews; 18% of the authors) compared with the general medical journals (64% of the articles; 40% of the authors). The most common types of industry-related disclosures were for consulting, research support, and speaking fees. Disclosures seemed to be of limited utility in helping readers assess possible biases because the nature and the extent of the relationships being disclosed were often unclear. Efforts to screen out authors with significant financial relationships pertaining to the topic under review may be more effective than are disclosures in protecting the integrity of the medical literature.

Parasitic helminths and their beneficial impact on type 1 and type 2 diabetes.

PubMed

Berbudi, Afiat; Ajendra, Jesuthas; Wardani, Ajeng P F; Hoerauf, Achim; Hübner, Marc P

2016-03-01

It is estimated that by the year 2035 almost 600 million people will suffer from diabetes. In the case of type 2 diabetes, the strongest increase of diabetes incidence occurs in developing and newly industrialized countries. This increase correlates not only with a progressing sedentary lifestyle and nutritional changes, but also environmental changes. Similarly, the increase of type 1 diabetes incidence in industrialized countries over the past decades cannot be explained by genetic factors alone, suggesting that environmental changes are also involved. One such environmental change is a reduced exposure to pathogens because of improved hygiene. Parasitic helminths modulate the immune system of their hosts and induce type 2 as well as regulatory immune responses. As pro-inflammatory immune responses are crucial for the onset of both type 1 and type 2 diabetes, helminth-induced immunomodulation may prevent diabetes onset and ameliorate insulin sensitivity. Several epidemiological studies in human and experimental animal models support such a protective effect of helminths for autoimmune diabetes. Recent studies further suggest that helminths may also provide such a beneficial effect for type 2 diabetes. In this review we summarize studies that investigated parasitic helminths and helminth-derived products and their impact on both type 1 and type 2 diabetes highlighting potential protective mechanisms. Copyright © 2015 John Wiley & Sons, Ltd.

Intergenerational Entrepreneurship in an Educational Setting.

ERIC Educational Resources Information Center

Owen, Melissa; Wright, Paul

Howe-To Industries is an intergenerational entrepreneurship project at the John de la Howe School, a state-supported institution for at-risk youth in rural McCormick County, South Carolina. Expansion of this type of program into public schools could engage the community and school system in a mutually beneficial relationship. John de la Howe…

Safety Climate and Occupational Stress According to Occupational Accidents Experience and Employment Type in Shipbuilding Industry of Korea.

PubMed

Kim, Kyung Woo; Park, Sung Jin; Lim, Hae Sun; Cho, Hm Hak

2017-09-01

Safety climate and occupational stress are related with occupational accident. The present study tried to identify the differences in safety climate and occupational stress according to occupational accidents experience and employment type (e.g., direct workers and subcontract workers). In this study, we conducted a survey using safety climate scale and Korean Occupational Stress Scale and classified the participants into four groups: direct workers working for accident-free departments, direct workers working for accident departments, subcontract workers working for accident-free departments, and subcontract workers working for accident departments for 2 years within the same workplace in the shipbuilding industry. The direct workers and subcontract workers showed diverse results in subscales of safety climate and occupational stress. This result is supported by existing studies; however, further study is necessary for more supporting evidence and elaborative methodological approach. The necessity of management for safety climate and psychosocial factor such as occupational stress for both direct workers and subcontract workers as a whole is suggested by this study.

Knowledge-based and model-based hybrid methodology for comprehensive waste minimization in electroplating plants

NASA Astrophysics Data System (ADS)

Luo, Keqin

1999-11-01

The electroplating industry of over 10,000 planting plants nationwide is one of the major waste generators in the industry. Large quantities of wastewater, spent solvents, spent process solutions, and sludge are the major wastes generated daily in plants, which costs the industry tremendously for waste treatment and disposal and hinders the further development of the industry. It becomes, therefore, an urgent need for the industry to identify technically most effective and economically most attractive methodologies and technologies to minimize the waste, while the production competitiveness can be still maintained. This dissertation aims at developing a novel WM methodology using artificial intelligence, fuzzy logic, and fundamental knowledge in chemical engineering, and an intelligent decision support tool. The WM methodology consists of two parts: the heuristic knowledge-based qualitative WM decision analysis and support methodology and fundamental knowledge-based quantitative process analysis methodology for waste reduction. In the former, a large number of WM strategies are represented as fuzzy rules. This becomes the main part of the knowledge base in the decision support tool, WMEP-Advisor. In the latter, various first-principles-based process dynamic models are developed. These models can characterize all three major types of operations in an electroplating plant, i.e., cleaning, rinsing, and plating. This development allows us to perform a thorough process analysis on bath efficiency, chemical consumption, wastewater generation, sludge generation, etc. Additional models are developed for quantifying drag-out and evaporation that are critical for waste reduction. The models are validated through numerous industrial experiments in a typical plating line of an industrial partner. The unique contribution of this research is that it is the first time for the electroplating industry to (i) use systematically available WM strategies, (ii) know quantitatively and accurately what is going on in each tank, and (iii) identify all WM opportunities through process improvement. This work has formed a solid foundation for the further development of powerful WM technologies for comprehensive WM in the following decade.

Lean waste classification model to support the sustainable operational practice

NASA Astrophysics Data System (ADS)

Sutrisno, A.; Vanany, I.; Gunawan, I.; Asjad, M.

2018-04-01

Driven by growing pressure for a more sustainable operational practice, improvement on the classification of non-value added (waste) is one of the prerequisites to realize sustainability of a firm. While the use of the 7 (seven) types of the Ohno model now becoming a versatile tool to reveal the lean waste occurrence. In many recent investigations, the use of the Seven Waste model of Ohno is insufficient to cope with the types of waste occurred in industrial practices at various application levels. Intended to a narrowing down this limitation, this paper presented an improved waste classification model based on survey to recent studies discussing on waste at various operational stages. Implications on the waste classification model to the body of knowledge and industrial practices are provided.

ROOT 6 and beyond: TObject, C++14 and many cores

DOE PAGES

Bellenot, B.; Canal, Ph; Couet, O.; ...

2015-12-23

Following the release of version 6, ROOT has entered a new area of development. It will leverage the industrial strength compiler library shipping in ROOT 6 and its support of the C++11/14 standard, to significantly simplify and harden ROOT's interfaces and to clarify and substantially improve ROOT's support for multi-threaded environments. Furthermore, this talk will also recap the most important new features and enhancements in ROOT in general, focusing on those allowed by the improved interpreter and better compiler support, including I/O for smart pointers, easier type safe access to the content of TTrees and enhanced multi processor support.

Flight Dynamics Analysis Branch

NASA Technical Reports Server (NTRS)

Stengle, Tom; Flores-Amaya, Felipe

2000-01-01

This report summarizes the major activities and accomplishments carried out by the Flight Dynamics Analysis Branch (FDAB), Code 572, in support of flight projects and technology development initiatives in fiscal year 2000. The report is intended to serve as a summary of the type of support carried out by the FDAB, as well as a concise reference of key accomplishments and mission experience derived from the various mission support roles. The primary focus of the FDAB is to provide expertise in the disciplines of flight dynamics, spacecraft trajectory, attitude analysis, and attitude determination and control. The FDAB currently provides support for missions and technology development projects involving NASA, government, university, and private industry.

Is Industry Funding Associated with Greater Scholarly Impact Among Academic Neurosurgeons?

PubMed

Eloy, Jean Anderson; Kilic, Suat; Yoo, Nicholas G; Mcleod, Thomas; Svider, Peter F; Baredes, Soly; Folbe, Adam J; Couldwell, William T; Liu, James K

2017-07-01

To determine the relationship between industry payments and scholarly impact among academic neurosurgeons. Faculty names and academic rank data were obtained from department websites, bibliometric data were obtained from the Scopus database, and industry payment data were obtained from the Center for Medicare and Medicaid Services open payments database (openpayments.cms.gov). The h-index was used to estimate scholarly impact. Payments were classified as "general," "associated research," and "research payments." Subgroup analyses were done for academic rank, fellowship training, and sex. Among 1008 academic neurosurgeons, scholarly impact was greater among individuals receiving associated research industry support compared with those not receiving it. Scholarly impact also was greater among individuals who received more than $10,000 of any type of industry support compared with individuals who received less than that or no payment. This association also was seen in fellowship-trained surgeons. Female neurosurgeons were less likely than male neurosurgeons to get industry funding and were likely to get less funding. There is a strong association between associated research funding from industry and scholarly impact among academic neurosurgeons. It's unclear whether this association is a result of funding facilitating more research projects that eventually lead to more high-impact publications, if industry is providing more funding to academic neurosurgeons with greater scholarly impact, or whether it represents intrinsic academic activity among a group of neurosurgeons who are more likely to be academically productive and procure funding from all potential sources to increase this activity. Copyright © 2017 Elsevier Inc. All rights reserved.

Ground equipment for the support of packet telemetry and telecommand

NASA Technical Reports Server (NTRS)

Hell, Wolfgang

1994-01-01

This paper describes ground equipment for packet telemetry and telecommand which has been recently developed by industry for the European Space Agency. The architectural concept for this type of equipment is outlined and the actual implementation is presented. Focus is put on issues related to cross support and telescience as far as they affect the design of the interfaces to the users of the services provided by the equipment and to the management entities in charge of equipment control and monitoring.

A synthetic method for atmospheric diffusion simulation and environmental impact assessment of accidental pollution in the chemical industry in a WEBGIS context.

PubMed

Ni, Haochen; Rui, Yikang; Wang, Jiechen; Cheng, Liang

2014-09-05

The chemical industry poses a potential security risk to factory personnel and neighboring residents. In order to mitigate prospective damage, a synthetic method must be developed for an emergency response. With the development of environmental numeric simulation models, model integration methods, and modern information technology, many Decision Support Systems (DSSs) have been established. However, existing systems still have limitations, in terms of synthetic simulation and network interoperation. In order to resolve these limitations, the matured simulation model for chemical accidents was integrated into the WEB Geographic Information System (WEBGIS) platform. The complete workflow of the emergency response, including raw data (meteorology information, and accident information) management, numeric simulation of different kinds of accidents, environmental impact assessments, and representation of the simulation results were achieved. This allowed comprehensive and real-time simulation of acute accidents in the chemical industry. The main contribution of this paper is that an organizational mechanism of the model set, based on the accident type and pollutant substance; a scheduling mechanism for the parallel processing of multi-accident-type, multi-accident-substance, and multi-simulation-model; and finally a presentation method for scalar and vector data on the web browser on the integration of a WEB Geographic Information System (WEBGIS) platform. The outcomes demonstrated that this method could provide effective support for deciding emergency responses of acute chemical accidents.

A Synthetic Method for Atmospheric Diffusion Simulation and Environmental Impact Assessment of Accidental Pollution in the Chemical Industry in a WEBGIS Context

PubMed Central

Ni, Haochen; Rui, Yikang; Wang, Jiechen; Cheng, Liang

2014-01-01

The chemical industry poses a potential security risk to factory personnel and neighboring residents. In order to mitigate prospective damage, a synthetic method must be developed for an emergency response. With the development of environmental numeric simulation models, model integration methods, and modern information technology, many Decision Support Systems (DSSs) have been established. However, existing systems still have limitations, in terms of synthetic simulation and network interoperation. In order to resolve these limitations, the matured simulation model for chemical accidents was integrated into the WEB Geographic Information System (WEBGIS) platform. The complete workflow of the emergency response, including raw data (meteorology information, and accident information) management, numeric simulation of different kinds of accidents, environmental impact assessments, and representation of the simulation results were achieved. This allowed comprehensive and real-time simulation of acute accidents in the chemical industry. The main contribution of this paper is that an organizational mechanism of the model set, based on the accident type and pollutant substance; a scheduling mechanism for the parallel processing of multi-accident-type, multi-accident-substance, and multi-simulation-model; and finally a presentation method for scalar and vector data on the web browser on the integration of a WEB Geographic Information System (WEBGIS) platform. The outcomes demonstrated that this method could provide effective support for deciding emergency responses of acute chemical accidents. PMID:25198686

Renewable energy for productive uses in Mexico

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hanley, C.

1997-12-01

This paper describes a USAID/USDOE sponsored program to implement renewable energy in Mexico for productive uses. The objectives are to expand markets for US and Mexican industries, and to combat global climate change - primarily greenhouse gas emissions. The focus is on off-grid applications, with an emphasis on developing the institution structure to support the development of these industries within the country. Agricultural development is an example of the type of industry approached, where photovoltaic and wind power can be used for water pumping. There are hundreds of projects under review, and this interest has put renewables as a linemore » item in Mexico`s rural development budget. Village power projects are being considered in the form of utility partnerships.« less

Analysis on effects of energy efficiency regulations & standards for industrial boilers in China

NASA Astrophysics Data System (ADS)

Liu, Ren; Chen, Lili; Zhao, Yuejin; Liu, Meng

2017-11-01

The industrial boilers in China are featured by large quantity, wide distribution, high energy consumption and heavy environmental pollution, which are key problems faced by energy conservation and environmental protection in China. Meanwhile, industrial boilers are important equipment for national economy and people’s daily life, and energy conservation gets through all segments from type selection, purchase, installation and acceptance to fuel management, operation, maintenance and service. China began to implement such national mandatory standards and regulations for industrial boiler as GB24500-2009 The Minimum Allowable Values of Energy Efficiency and Energy Efficiency Grades of Industrial Boilers and TSG G002-2010 Supervision Regulation on Energy-Saving Technology for Boilers since 2009, which obviously promote the development of energy conservation of industrial boilers, but there are also some problems with the rapid development of technologies for energy conservation of industrial boilers. In this paper, the implementation of energy efficiency standards for industrial boilers in China and the significance are analyzed based on survey data, and some suggestions are proposed for the energy efficiency standards for industrial boilers. Support by Project 2015424050 of Special Fund for quality control Research in the Public Interest

A prototype knowledge-based decision support system for industrial waste management. Part 1: The decision support system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Boyle, C.A.; Baetz, B.W.

1998-12-31

Although there are a number of expert systems available which are designed to assist in resolving environmental problems, there is still a need for a system which would assist managers in determining waste management options for all types of wastes from one or more industrial plants, giving priority to sustainable use of resources, reuse and recycling. A prototype model was developed to determine the potentials for reuse and recycling of waste materials, to select the treatments needed to recycle waste materials or for treatment before disposal, and to determine potentials for co-treatment of wastes. A knowledge-based decision support system wasmore » then designed using this model. This paper describes the prototype model, the developed knowledge-based decision support system, the input and storage of data within the system and the inference engine developed for the system to determine the treatment options for the wastes. Options for sorting and selecting treatment trains are described, along with a discussion of the limitations of the approach and future developments needed for the system.« less

Flight Dynamics Analysis Branch End of Fiscal Year 2002 Report

NASA Technical Reports Server (NTRS)

Mangus, David (Editor); Mendelsohn, Chad (Editor); Starin, Scott (Editor); Stengle, Tom (Editor); Truong, Son (Editor)

2002-01-01

This report summarizes the major activities and accomplishments carried out by the Flight Dynamics Analysis Branch (FDAB), Code 572, in support of flight projects and technology development initiatives in Fiscal Year (FY) 2002. The report is intended to serve as a summary of the type of support carried out by the FDAB, as well as a concise reference of key accomplishments and mission experience derived from the various mission support roles. The primary focus of the FDAB is to provide expertise in the disciplines of flight dynamics including navigation, spacecraft trajectory design, attitude analysis, attitude determination and attitude control. The FDAB currently provides support for missions and technology development projects involving NASA, government, university, and private industry.

Manpower development for the biomedical industry space.

PubMed

Goh, James C H

2013-01-01

The Biomedical Sciences (BMS) Cluster is one of four key pillars of the Singapore economy. The Singapore Government has injected research funding for basic and translational research to attract companies to carry out their commercial R&D activities. To further intensify the R&D efforts, the National Research Foundation (NRF) was set up to coordinate the research activities of different agencies within the larger national framework and to fund strategic R&D initiatives. In recent years, funding agencies began to focus on support of translational and clinical research, particularly those with potential for commercialization. Translational research is beginning to have traction, in particular research funding for the development of innovation medical devices. Therefore, the Biomedical Sciences sector is projected to grow which means that there is a need to invest in human capital development to achieve sustainable growth. In support of this, education and training programs to strengthen the manpower capabilities for the Biomedical Sciences industry have been developed. In recent years, undergraduate and graduate degree courses in biomedical engineering/bioengineering have been developing at a rapid rate. The goal is to train students with skills to understand complex issues of biomedicine and to develop and implement of advanced technological applications to these problems. There are a variety of career opportunities open to graduates in biomedical engineering, however regardless of the type of career choices, students must not only focus on achieving good grades. They have to develop their marketability to employers through internships, overseas exchange programs, and involvement in leadership-type activities. Furthermore, curriculum has to be developed with biomedical innovation in mind and ensure relevance to the industry. The objective of this paper is to present the NUS Bioengineering undergraduate program in relation to manpower development for the biomedical industry in Singapore.

Intelligence Support to Urban Operations

DTIC Science & Technology

2015-12-01

Elevated systems and mass transit routes provide exposed lines of communications between city sectors while also offering points for good observation...Per capita income.  Percentage of population by economic sector (industry, service, other).  Percentage of population living in poverty...Percentage of population dependent on economic aid.  Type of aid.  Unemployment rate.  Underemployment rate.  Status of trade unions.  Whether

Inventory Preparation Guide for Commercial or Industrial-Type Activities and Contract Support Services,

DTIC Science & Technology

1980-08-01

or injury ; includes primarily patients whose actual impairment is related to neuromusculoskeletal, pulmonary, and cardiovasular systems; includes the...disease or injury ; includes primarily patients whose actual impairment is related to neuromusculoskeletal, pulmonary, and cardiovascular systems...orthodontics, endo - dontics, oral hygiene, preventive dentistry, and radiodontics to eligible dental patients. (Formerly in code H113 - Dental Care.) N312

Efficacy of Allium cepa test system for screening cytotoxicity and genotoxicity of industrial effluents originated from different industrial activities.

PubMed

Pathiratne, Asoka; Hemachandra, Chamini K; De Silva, Nimal

2015-12-01

Efficacy of Allium cepa test system for screening cytotoxicity and genotoxicity of treated effluents originated from four types of industrial activities (two textile industries, three rubber based industries, two common treatment plants of industrial zones, and two water treatment plants) was assessed. Physico-chemical parameters including the heavy metal/metalloid levels of the effluents varied depending on the industry profile, but most of the measured parameters in the effluents were within the specified tolerance limits of Sri Lankan environmental regulations for discharge of industrial effluents into inland surface waters. In the A. cepa test system, the undiluted effluents induced statistically significant root growth retardation, mitosis depression, and chromosomal aberrations in root meristematic cells in most cases in comparison to the dilution water and upstream water signifying effluent induced cytotoxicity and genotoxicity. Ethyl methane sulphonate (a mutagen, positive control) and all the effluents under 1:8 dilution significantly induced total chromosomal aberrations in root meristematic cells in comparison to the dilution water and upstream water indicating inadequacy of expected 1:8 dilutions in the receiving waters for curtailing genotoxic impacts. The results support the use of a practically feasible A. cepa test system for rapid screening of cytotoxicity and genotoxicity of diverse industrial effluents discharging into inland surface waters.

Discounts and rebates granted to public payers for medicines in European countries

PubMed Central

Vogler, Sabine; Zimmermann, Nina; Habl, Claudia; Piessnegger, Jutta; Bucsics, Anna

2012-01-01

Objective: The objective of this study was to provide an overview about the existence and types of discounts and rebates granted to public payers by the pharmaceutical industry in European countries. Methods: Data were collected via a questionnaire in spring 2011. Officials from public authorities for pharmaceutical pricing and reimbursement represented in the PPRI (Pharmaceutical Pricing and Reimbursement Information) network provided the information and reviewed the compilation. Results: Information is available from 31 European countries. Discounts and rebates granted to public payers by pharmaceutical industry were reported for 25 European countries. Such discounts exist both in the in- and out-patient sectors in 21 countries and in the in-patient sector only in four countries. Six countries reported not having any regulations or agreements regarding the discounts and rebates granted by industry. The most common discounts and rebates are price reductions and refunds linked to sales volume but types such as in-kind support, price-volume and risk-sharing agreements are also in place. A mix of various types of discounts and rebates is common. Many of these arrangements are confidential. Differences regarding types, the organizational and legal framework, validity and frequency of updates and the amount of the discounts and rebates granted exist among the surveyed countries. Conclusions: In Europe, discounts and rebates on medicines granted by pharmaceutical industry to public payers are common tools to contain public pharmaceutical expenditure. They appear to be used as a complimentary measure when price regulation does not achieve the desired results and in the few European countries with no or limited price regulation. The confidential character of many of these arrangements impedes transparency and may lead to a distortion of medicines prices. An analysis of the impact on these measures is recommended. PMID:23093898

Alcohol sponsorship of community football clubs: the current situation.

PubMed

Sawyer, Amy L; Wolfenden, Luke; Kennedy, Vanessa J; Kingsland, Melanie; Young, Kylie G; Tindall, Jennifer; Rowland, Bosco C; Colbran, Richard W; Wiggers, John H

2012-04-01

There is accumulating evidence supporting a link between alcohol industry sponsorship and alcohol-related problems in both community and elite-level sports. Little is known, however, about the current status of such sponsorship, particularly of community sport. This study aimed to assess associations between alcohol industry sponsorship and different community football clubs in Australia. The study involved 101 community football clubs across New South Wales, Australia. One representative from each club took part in a cross-sectional telephone survey designed to assess club (football code, number of players, socioeconomic and geographic descriptors) and alcohol industry sponsorship (money, equipment, free alcohol or discounted alcohol) characteristics. Chi-square analysis was used to test associations between club characteristics, and: i) any alcohol industry sponsorship; and ii) type of sponsorship. Eighty-eight per cent of clubs reported receiving sponsorship from the alcohol industry, and most clubs (82%) were sponsored by a licensed premises. There were no significant associations between club characteristics and source of alcohol industry sponsorship. However, small clubs were found to be significantly more likely to receive free or discounted alcohol sponsorship than larger clubs (p=0.05). This exploratory study suggests a significant presence of alcohol industry sponsorship among community football clubs in Australia.

Sectoral transitions - modeling the development from agrarian to service economies

NASA Astrophysics Data System (ADS)

Lutz, Raphael; Spies, Michael; Reusser, Dominik E.; Kropp, Jürgen P.; Rybski, Diego

2013-04-01

We consider the sectoral composition of a country's GDP, i.e the partitioning into agrarian, industrial, and service sectors. Exploring a simple system of differential equations we characterise the transfer of GDP shares between the sectors in the course of economic development. The model fits for the majority of countries providing 4 country-specific parameters. Relating the agrarian with the industrial sector, a data collapse over all countries and all years supports the applicability of our approach. Depending on the parameter ranges, country development exhibits different transfer properties. Most countries follow 3 of 8 characteristic paths. The types are not random but show distinct geographic and development patterns.

The Experience Factory: Strategy and Practice

NASA Technical Reports Server (NTRS)

Basili, Victor R.; Caldiera, Gianluigi

1995-01-01

The quality movement, that has had in recent years a dramatic impact on all industrial sectors, has recently reached the system and software industry. Although some concepts of quality management, originally developed for other product types, can be applied to software, its specificity as a product which is developed and not produced requires a special approach. This paper introduces a quality paradigm specifically tailored on the problem of the systems and software industry. Reuse of products, processes and experiences originating from the system life cycle is seen today as a feasible solution to the problem of developing higher quality systems at a lower cost. In fact, quality improvement is very often achieved by defining and developing an appropriate set of strategic capabilities and core competencies to support them. A strategic capability is, in this context, a corporate goal defined by the business position of the organization and implemented by key business processes. Strategic capabilities are supported by core competencies, which are aggregate technologies tailored to the specific needs of the organization in performing the needed business processes. Core competencies are non-transitional, have a consistent evolution, and are typically fueled by multiple technologies. Their selection and development requires commitment, investment and leadership. The paradigm introduced in this paper for developing core competencies is the Quality Improvement Paradigm which consists of six steps: (1) Characterize the environment, (2) Set the goals, (3) Choose the process, (4) Execute the process, (5) Analyze the process data, and (6) Package experience. The process must be supported by a goal oriented approach to measurement and control, and an organizational infrastructure, called Experience Factory. The Experience Factory is a logical and physical organization distinct from the project organizations it supports. Its goal is development and support of core competencies through capitalization and reuse of its cycle experience and products. The paper introduces the major concepts of the proposed approach, discusses their relationship with other approaches used in the industry, and presents a case in which those concepts have been successfully applied.

Tailoring a Human Reliability Analysis to Your Industry Needs

NASA Technical Reports Server (NTRS)

DeMott, D. L.

2016-01-01

Companies at risk of accidents caused by human error that result in catastrophic consequences include: airline industry mishaps, medical malpractice, medication mistakes, aerospace failures, major oil spills, transportation mishaps, power production failures and manufacturing facility incidents. Human Reliability Assessment (HRA) is used to analyze the inherent risk of human behavior or actions introducing errors into the operation of a system or process. These assessments can be used to identify where errors are most likely to arise and the potential risks involved if they do occur. Using the basic concepts of HRA, an evolving group of methodologies are used to meet various industry needs. Determining which methodology or combination of techniques will provide a quality human reliability assessment is a key element to developing effective strategies for understanding and dealing with risks caused by human errors. There are a number of concerns and difficulties in "tailoring" a Human Reliability Assessment (HRA) for different industries. Although a variety of HRA methodologies are available to analyze human error events, determining the most appropriate tools to provide the most useful results can depend on industry specific cultures and requirements. Methodology selection may be based on a variety of factors that include: 1) how people act and react in different industries, 2) expectations based on industry standards, 3) factors that influence how the human errors could occur such as tasks, tools, environment, workplace, support, training and procedure, 4) type and availability of data, 5) how the industry views risk & reliability, and 6) types of emergencies, contingencies and routine tasks. Other considerations for methodology selection should be based on what information is needed from the assessment. If the principal concern is determination of the primary risk factors contributing to the potential human error, a more detailed analysis method may be employed versus a requirement to provide a numerical value as part of a probabilistic risk assessment. Industries involved with humans operating large equipment or transport systems (ex. railroads or airlines) would have more need to address the man machine interface than medical workers administering medications. Human error occurs in every industry; in most cases the consequences are relatively benign and occasionally beneficial. In cases where the results can have disastrous consequences, the use of Human Reliability techniques to identify and classify the risk of human errors allows a company more opportunities to mitigate or eliminate these types of risks and prevent costly tragedies.

Vacuum pumps and systems: A review of current practice

NASA Technical Reports Server (NTRS)

Giles, Stuart

1986-01-01

A review of the fundamental characteristics of the many types of vacuum pumps and vacuum pumping systems is given. The optimum pumping range, relative cost, performance limitations, maintenance problems, system operating costs and similar subjects are discussed. Experiences from the thin film deposition, chemical processing, material handling, food processing and other industries, as well as space simulation are used to support conclusions and recommendations.

Structure, function and management of semi-natural habitats for conservation biological control: a review of European studies.

PubMed

Holland, John M; Bianchi, Felix Jja; Entling, Martin H; Moonen, Anna-Camilla; Smith, Barbara M; Jeanneret, Philippe

2016-09-01

Different semi-natural habitats occur on farmland, and it is the vegetation's traits and structure that subsequently determine their ability to support natural enemies and their associated contribution to conservation biocontrol. New habitats can be created and existing ones improved with agri-environment scheme funding in all EU member states. Understanding the contribution of each habitat type can aid the development of conservation control strategies. Here we review the extent to which the predominant habitat types in Europe support natural enemies, whether this results in enhanced natural enemy densities in the adjacent crop and whether this leads to reduced pest densities. Considerable variation exists in the available information for the different habitat types and trophic levels. Natural enemies within each habitat were the most studied, with less information on whether they were enhanced in adjacent fields, while their impact on pests was rarely investigated. Most information was available for woody and herbaceous linear habitats, yet not for woodland which can be the most common semi-natural habitat in many regions. While the management and design of habitats offer potential to stimulate conservation biocontrol, we also identified knowledge gaps. A better understanding of the relationship between resource availability and arthropod communities across habitat types, the spatiotemporal distribution of resources in the landscape and interactions with other factors that play a role in pest regulation could contribute to an informed management of semi-natural habitats for biocontrol. © 2016 Society of Chemical Industry. © 2016 Society of Chemical Industry.

Suicide and occupation: further supportive evidence for their relevance.

PubMed

Nishimura, Mariko; Terao, Takeshi; Soeda, Shuji; Nakamura, Jun; Iwata, Noboru; Sakamoto, Kaoru

2004-01-01

In recent years, the relationship between occupation and suicide has been extensively investigated, but few definite conclusions regarding the nature of the relationship have been established. In the present study, this relationship was investigated by examining Japanese governmental statistics. First, correlations of suicide rate relative to industry categories were examined individually for primary industry (farmers, fishermen, and forest workers), secondary industry (construction workers, manufacture works, and miners), and tertiary industry (indoor workers) for all of the 47 prefectures of Japan. Second, in the industries that showed a significant correlation with suicide rate, the relationship to other factors was adjusted using possibly confounding factors. As a result, suicide rate was positively correlated with primary industry percentage, but not with secondary or tertiary industry percentages. Multiple regression analysis showed that suicide rate was positively associated with primary industry percentage with significant tendency while it was significantly and negatively associated with annual total sunshine. Limitations are that individual suicide rates according to occupational types were not available and direct correlations with the above variables could not be investigated. The present findings suggest a possibility that occupational factors associated with primary industry may be relevant to suicide, and that, additionally, annual total sunshine may affect suicide independently. Since workers with primary industry are likely to be exposed to sunshine than other workers, they may tend to be more affected by the decrease of annual total sunshine.

Supply side management innovation: —Analysis on Enterprises in Scientific Industry Park Based on Market Orientation

NASA Astrophysics Data System (ADS)

Li, Xing; Mao, Fenlan; Lin, Mian; Yadi, Nan

2017-12-01

This research presents a conceptual framework for incorporating organizational learning and innovations as the mediating variables between market orientation and organizational performance. The samples of this study include 145 companies from the information technology industry in the Scientific Industry Parks. The global model fit is acceptable. This empirical result supports the constructs mentioned above. 1. Market orientation has a positive and direct impact on organizational learning, administrative and technical innovation. 2. Organizational learning has a positive and direct impact on administrative and technical innovation, but with no statistically significant direct impact on performance. 3. Organizational learning does have a positive and indirect impact on performance by means of organizational innovations. 4. It is not statistically significant that the impact of the two innovation types (both administrative and technical) interact with each other.

Extending Miles & Snow's strategy choice typology to the German hospital sector.

PubMed

Helmig, Bernd; Hinz, Vera; Ingerfurth, Stefan

2014-12-01

Hospitals' strategy choices represent highly relevant factors that affect organizational performance and survival. This study assesses the differences among hospitals' strategic choices. This strategy definition and assessment reflects the typology proposed by Miles and Snow, who distinguish four strategy types: defender, analyzer, prospector, and reactor. Synthesis of empirical evidence from previous studies that have applied Miles and Snow's typology in the hospital sector using various methodological approaches and measures provides hints for industry-specific patterns and avenues for further research. Taking an extended view of strategic choice, the authors conduct an empirical survey of a sample of 178 German hospitals. The authors apply a multi-item measure of the Miles and Snow strategy types in the hospital sector and identify hybrid strategy types that deviate from the four strategy types defined by Miles and Snow. Overall, seven distinct strategy types emerge from this analysis. There exist three distinct hybrid types in particular. Strategy choice is systematically related to hospital size and teaching status but not to ownership and location. The significant variance in performance for the seven different strategy types justifies the distinction between them. The results support the idea of industry-specific strategy choices. Policy makers should analyze the structural context in which hospitals operate and intervene through political and regulatory means. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

The Lhc Cryomagnet Supports in Glass-Fiber Reinforced Epoxy: a Large Scale Industrial Production with High Reproducibility in Performance

NASA Astrophysics Data System (ADS)

Poncet, A.; Struik, M.; Trigo, J.; Parma, V.

2008-03-01

The about 1700 LHC main ring super-conducting magnets are supported within their cryostats on 4700 low heat in leak column-type supports. The supports were designed to ensure a precise and stable positioning of the heavy dipole and quadrupole magnets while keeping thermal conduction heat loads within budget. A trade-off between mechanical and thermal properties, as well as cost considerations, led to the choice of glass fibre reinforced epoxy (GFRE). Resin Transfer Moulding (RTM), featuring a high level of automation and control, was the manufacturing process retained to ensure the reproducibility of the performance of the supports throughout the large production. The Spanish aerospace company EADS-CASA Espacio developed the specific RTM process, and produced the total quantity of supports between 2001 and 2004. This paper describes the development and the production of the supports, and presents the production experience and the achieved performance.

Enhanced production of bacterial cellulose by using a biofilm reactor and its material property analysis

PubMed Central

Cheng, Kuan-Chen; Catchmark, Jeff M; Demirci, Ali

2009-01-01

Bacterial cellulose has been used in the food industry for applications such as low-calorie desserts, salads, and fabricated foods. It has also been used in the paper manufacturing industry to enhance paper strength, the electronics industry in acoustic diaphragms for audio speakers, the pharmaceutical industry as filtration membranes, and in the medical field as wound dressing and artificial skin material. In this study, different types of plastic composite support (PCS) were implemented separately within a fermentation medium in order to enhance bacterial cellulose (BC) production by Acetobacter xylinum. The optimal composition of nutritious compounds in PCS was chosen based on the amount of BC produced. The selected PCS was implemented within a bioreactor to examine the effects on BC production in a batch fermentation. The produced BC was analyzed using X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), thermogravimetric analysis (TGA), and dynamic mechanical analysis (DMA). Among thirteen types of PCS, the type SFYR+ was selected as solid support for BC production by A. xylinum in a batch biofilm reactor due to its high nitrogen content, moderate nitrogen leaching rate, and sufficient biomass attached on PCS. The PCS biofilm reactor yielded BC production (7.05 g/L) that was 2.5-fold greater than the control (2.82 g/L). The XRD results indicated that the PCS-grown BC exhibited higher crystallinity (93%) and similar crystal size (5.2 nm) to the control. FESEM results showed the attachment of A. xylinum on PCS, producing an interweaving BC product. TGA results demonstrated that PCS-grown BC had about 95% water retention ability, which was lower than BC produced within suspended-cell reactor. PCS-grown BC also exhibited higher Tmax compared to the control. Finally, DMA results showed that BC from the PCS biofilm reactor increased its mechanical property values, i.e., stress at break and Young's modulus when compared to the control BC. The results clearly demonstrated that implementation of PCS within agitated fermentation enhanced BC production and improved its mechanical properties and thermal stability. PMID:19630969

Industrial shifts, female employment, and occupational differentiation: a dynamic model for American cities, 1960-1970.

PubMed

Semyonov, M; Scott, R I

1983-05-01

Sex-linked occupational differentiation has been seen as influenced by both the industrial structure of the economy and the sex composition of the labor force. Here, with a sample of 70 SMSAs, it was found (a) that the odds of men relative to women of joining professional and managerial occupations increased between 1960 and 1970, and (b) that this increase was dependent on the growth of tertiary industries and the greater number of women joining the cash economy. The observed effect of industrial shifts on sex-occupational differentiation, however, is argued to be a spurious consequence of the gender-composition of the work force. Specifically, the development of tertiary industries generates greater demand for female labor. Intensive recruitment of women to the labor force in turn increases occupational differentiation because females, in sex-typed labor markets, are likely to be channeled in disproportionate numbers away from upper-status occupations. The findings demonstrate that traditional modernization theory is unable to account for this. However, the results lend support to expectations derived from a labor market sex-segmentation approach.

Emergence of the nuclear industry and associated crime. Master's thesis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vaught, J.W.

Nuclear energy, in weapons production and electrical power generation, is a technology that has endured public scrutiny since the late 1940s. Societal acceptance of this industry has been affected by controversy in the following areas: health effects of exposure to radiation, possible consequences resulting from accidents, and nuclear nonproliferation. The literature review begins in Chapter 2 by examining the changing public perceptions of nuclear energy over the last forty years. Support for the ideals and practices of the industry has often wavered, due to media representation of incidents, accidents, and potential catastrophic events. The second part of the chapter highlightsmore » the crimes associated with nuclear energy in a chronological order of concern by nuclear industry security specialists. Research has found certain types of crime to be more prevalent during particular eras than others. Crimes instigated by spies, peace activists, terrorists, and the insider (employee) are reviewed, with an emphasis on insider crime.« less

A concept for ubiquitous robotics in industrial environment

NASA Astrophysics Data System (ADS)

Sallinen, Mikko; Heilala, Juhani; Kivikunnas, Sauli

2007-09-01

In this paper a concept for industrial ubiquitous robotics is presented. The concept combines two different approaches to manage agile, adaptable production: firstly the human operator is strongly in the production loop and secondly, the robot workcell will be more autonomous and smarter to manage production. This kind of autonomous robot cell can be called production island. Communication to the human operator working in this kind of smart industrial environment can be divided into two levels: body area communication and operator-infrastructure communication including devices, machines and infra. Body area communication can be supportive in two directions: data is recorded by means of measuring physical actions, such as hand movements, body gestures or supportive when it will provide information to user such as guides or manuals for operation. Body area communication can be carried out using short range communication technologies such as NFC (Near Field communication) which is RFID type of communication. In the operator-infrastructure communication, WLAN or Bluetooth -communication can be used. Beyond the current Human Machine interaction HMI systems, the presented system concept is designed to fulfill the requirements for hybrid, knowledge intensive manufacturing in the future, where humans and robots operate in close co-operation.

Characterizing the development of sectoral gross domestic product composition.

PubMed

Lutz, Raphael; Spies, Michael; Reusser, Dominik E; Kropp, Jürgen P; Rybski, Diego

2013-07-01

We consider the sectoral composition of a country's gross domestic product (GDP), i.e., the partitioning into agrarian, industrial, and service sectors. Exploring a simple system of differential equations, we characterize the transfer of GDP shares between the sectors in the course of economic development. The model fits for the majority of countries providing four country-specific parameters. Relating the agrarian with the industrial sector, a data collapse over all countries and all years supports the applicability of our approach. Depending on the parameter ranges, country development exhibits different transfer properties. Most countries follow three of eight characteristic paths. The types are not random but show distinct geographic and development patterns.

Characterizing the development of sectoral gross domestic product composition

NASA Astrophysics Data System (ADS)

Lutz, Raphael; Spies, Michael; Reusser, Dominik E.; Kropp, Jürgen P.; Rybski, Diego

2013-07-01

We consider the sectoral composition of a country's gross domestic product (GDP), i.e., the partitioning into agrarian, industrial, and service sectors. Exploring a simple system of differential equations, we characterize the transfer of GDP shares between the sectors in the course of economic development. The model fits for the majority of countries providing four country-specific parameters. Relating the agrarian with the industrial sector, a data collapse over all countries and all years supports the applicability of our approach. Depending on the parameter ranges, country development exhibits different transfer properties. Most countries follow three of eight characteristic paths. The types are not random but show distinct geographic and development patterns.

Flight Dynamics Analysis Branch 2005 Technical Highlights

NASA Technical Reports Server (NTRS)

2005-01-01

This report summarizes the major activities and accomplishments carried out by the Flight Dynamics Analysis Branch (FDAB), Code 595, in support of flight projects and technology development initiatives in Fiscal Year (FY) 2005. The report is intended to serve as a summary of the type of support carried out by the FDAB, as well as a concise reference of key accomplishments and mission experience derived from the various mission support roles. The primary focus of the FDAB is to provide expertise in the disciplines of flight dynamics including spacecraft navigation (autonomous and ground based); spacecraft trajectory design and maneuver planning; attitude analysis; attitude determination and sensor calibration; and attitude control subsystem (ACS) analysis and design. The FDAB currently provides support for missions and technology development projects involving NASA, other government agencies, academia, and private industry.

[Three types of brand name loyalty strategies set up by drug manufacturers].

PubMed

PréMont, Marie-Claude; Gagnon, Marc-André

2014-11-01

The recent restructuring of the pharmaceutical industry has led to three new types of promotional strategies to build patient loyalty to brand name drugs: loyalty through rebates, patient support, and compassion programs. Loyalty through rebates seeks to keep patients on a brand name drug and prevent their switch to the generic equivalent. Loyalty through patient support provides aftersales services to help and support patients (by phone or home visits) in order to improve adherence to their treatments. Finally, compassion programs offer patients access to drugs still awaiting regulatory approval or reimbursement by insurers. When and if the approval process is successful, the manufacturer puts an end to the compassion program and benefits from a significant cohort of patients already taking a very expensive drug for which reimbursement is assured. The impact of these programs on public policies and patients' rights raises numerous concerns, among which the direct access to patients and their health information by drug manufacturers and upward pressure on costs for drug insurance plans.

Orthopaedic research and education foundation and industry.

PubMed

Wurth, Gene R; Sherr, Judy H; Coffman, Thomas M

2003-07-01

Members of orthopaedic industry commit a significant amount of funds each year to support research and education programs that are directly related to their product(s). In addition, industry supports organizations such as the Orthopaedic Research and Education Foundation. The relationship between the Orthopaedic Research and Education Foundation and industry began in the early 1980s. The support to the Orthopaedic Research and Education Foundation from industry primarily has come in the form of unrestricted grants. These grants best can be looked at as an investment rather than a contribution. This form of giving, once called corporate philanthropy is more accurately referred to as strategic philanthropy. Members of industry make these investments to enhance their reputations, build brand awareness, market their products and services, improve employee morale, increase customer loyalty, and establish strategic alliances. The specialty of orthopaedics is among the leaders in medicine in the amount of funding raised within the specialty for research and education programs. This is because of the amount of support from members of industry and the surgeons. During the past 15 years, 40% of the annual support to the Orthopaedic Research and Education Foundation has come from industry and the balance has come from surgeons and members of lay public. Future industry support of the Orthopaedic Research and Education Foundation and other organizations within the specialty of orthopaedics will be dependent on the continued demonstration of tangible returns in areas described.

Industry-Supported Team Students' Projects.

ERIC Educational Resources Information Center

Glozman, Vladimir

The industry-supported team students' project enhances professional, intellectual, and personal development of students while addressing the needs of local industry. In addition to achieving academic excellence, the students are exposed to industry requirements, and excel in effective oral communication and cooperative teamwork. The teamwork…

Conflicts of interest and critiques of the use of systematic reviews in policymaking: an analysis of opinion articles

PubMed Central

2014-01-01

Background Strong opinions for or against the use of systematic reviews to inform policymaking have been published in the medical literature. The purpose of this paper was to examine whether funding sources and author financial conflicts of interest were associated with whether an opinion article was supportive or critical of the use of systematic reviews for policymaking. We examined the nature of the arguments within each article, the types of disclosures present, and whether these articles are being cited in the academic literature. Methods We searched for articles that expressed opinions about the use of systematic reviews for policymaking. We included articles that presented opinions about the use of systematic reviews for policymaking and categorized each article as supportive or critical of such use. We extracted all arguments regarding the use of systematic reviews from each article and inductively coded each as internal or external validity argument, categorized disclosed funding sources, conflicts of interest, and article types, and systematically searched for undisclosed financial ties. We counted the number of times each article has been cited in the “Web of Science.” We report descriptive statistics. Results Articles that were critical of the use of systematic reviews (n = 25) for policymaking had disclosed or undisclosed industry ties 2.3 times more often than articles that were supportive of the use (n = 34). We found that editorials, comments, letters, and perspectives lacked published disclosures nearly twice as often (60% v. 33%) as other types of articles. We also found that editorials, comments, letters, and perspectives were less frequently cited in the academic literature than other article types (median number of citations = 5 v. 19). Conclusions It is important to consider whether an article has industry ties when evaluating the strength of the argument for or against the use of systematic reviews for policymaking. We found that journal conflict of interest disclosures are often inadequate, particularly for editorials, comments, letters, and perspectives and that these articles are being cited as evidence in the academic literature. Our results further suggest the need for more consistent and complete disclosure for all article types. PMID:25417178

The oppressive nature of work in healthcare: predictors of aggression against nurses and administrative staff.

PubMed

Rodwell, John; Demir, Defne; Flower, Rebecca L

2013-09-01

To assess the antecedents of workplace aggression (bullying and violence) among nurses and administration staff. As a result of power structures within the healthcare industry, nurses and administration staff may be more vulnerable to workplace aggression. Environmental and individual characteristics have been linked to the occurrence of such aggression among other groups. However, most research focuses on bullying, rarely extending these ideas to violence or nurses and administration staff specifically. Surveys were distributed to nurses and administration staff employed by an Australian healthcare organisation. Aggression types (bullying and violence), as well as environmental (demands, control and support) and individual (negative affectivity, NA) characteristics were measured. External emotional abuse was most frequently reported for nurses (29%) and bullying for administration staff (27%). Demands, support and NA were associated with different aggression types in nurses, whereas for administration staff, control, support and NA were linked. Low support and high NA are particularly important to nurses and administration staff and their experiences of aggression. Appropriate training for managers in providing support and acknowledging individual factors associated with aggression is essential. Further, managers should monitor aggression risk from patients and their associations towards staff in busy times. © 2013 John Wiley & Sons Ltd.

Sedentary behaviour and health at work: an investigation of industrial sector, job role, gender and geographical differences.

PubMed

Kazi, Aadil; Haslam, Cheryl; Duncan, Myanna; Clemes, Stacy; Twumasi, Ricardo

2018-06-21

This article presents baseline data from 1120 employees across 10 worksites enrolled in a workplace physical activity intervention. The study provides new data on physical activity, sedentary behaviour and health and highlights gender, geographical, job type and industrial sector differences. Sitting at work accounted for more than 60% of participants' total daily sitting time on work days. Weekly and monthly hours worked, body mass index (BMI) and waist circumference were significantly higher for workers in the private sector compared to the public sector. Employees in sales and customer services had significantly higher BMI scores and significantly lower scores for workability index (WAI), job satisfaction, organisational commitment and job motivation, compared to other groups. This study provides further evidence that work is a major contributor to sedentary behaviour and supports the pressing need for interventions particularly targeting private sector industries and sales and customer service sectors.

The development of the ICME supply-chain: Route to ICME implementation and sustainment

NASA Astrophysics Data System (ADS)

Furrer, David; Schirra, John

2011-04-01

Over the past twenty years, integrated computational materials engineering (ICME) has emerged as a key engineering field with great promise. Models simulating materials-related phenomena have been developed and are being validated for industrial application. The integration of computational methods into material, process and component design has been a challenge, however, in part due to the complexities in the development of an ICME "supply-chain" that supports, sustains and delivers this emerging technology. ICME touches many disciplines, which results in a requirement for many types of computational-based technology organizations to be involved to provide tools that can be rapidly developed, validated, deployed and maintained for industrial applications. The need for, and the current state of an ICME supply-chain along with development and future requirements for the continued pace of introduction of ICME into industrial design practices will be reviewed within this article.

[Occupational diseases in the petrochemical sector: types and temporal trends].

PubMed

Campo, Giuseppe

2013-01-01

In Italy, the archives of the National Institute for the Insurance of Workplace Accidents and Occupational Diseases (INAIL) are supported from several years by a second source of data on occupational diseases, the MALPROF system, based on data from the prevention units of the local health services (ASL). Integrating these two data flows allows connecting diseases and the occupations at the onset of the disease itself. The 2009-10 data from 12 Italian regions currently participating in the MALPROF system show that noise-induced hearing loss represents the relatively most frequent occupational disease (25.3%) in the petrochemical industry, followed by the musculoskeletal diseases (22.9%). Malignant tumors of the pleura and peritoneum follow with a proportional rate of 19%, six times higher than that recorded for the total industrial sectors (3.6%). Diseases of the respiratory system are clearly proportionally more frequent (16.5%) compared to data reported to the total industrial sectors (6%).

Tensile-Creep Test Specimen Preparation Practices of Surface Support Liners

NASA Astrophysics Data System (ADS)

Guner, Dogukan; Ozturk, Hasan

2017-12-01

Ground support has always been considered as a challenging issue in all underground operations. Many forms of support systems and supporting techniques are available in the mining/tunnelling industry. In the last two decades, a new polymer based material, Thin Spray-on Liner (TSL), has attained a place in the market as an alternative to the current areal ground support systems. Although TSL provides numerous merits and has different application purposes, the knowledge on mechanical properties and performance of this material is still limited. In laboratory studies, since tensile rupture is the most commonly observed failure mechanism in field applications, researchers have generally studied the tensile testing of TSLs with modification of American Society for Testing and Materials (ASTM) D-638 standards. For tensile creep testing, specimen preparation process also follows the ASTM standards. Two different specimen dimension types (Type I, Type IV) are widely preferred in TSL tensile testing that conform to the related standards. Moreover, molding and die cutting are commonly used specimen preparation techniques. In literature, there is a great variability of test results due to the difference in specimen preparation techniques and practices. In this study, a ductile TSL product was tested in order to investigate the effect of both specimen preparation techniques and specimen dimensions under 7-day curing time. As a result, ultimate tensile strength, tensile yield strength, tensile modulus, and elongation at break values were obtained for 4 different test series. It is concluded that Type IV specimens have higher strength values compared to Type I specimens and moulded specimens have lower results than that of prepared by using die cutter. Moreover, specimens prepared by molding techniques have scattered test results. Type IV specimens prepared by die cutter technique are suggested for preparation of tensile test and Type I specimens prepared by die cutter technique should be preferred for tensile creep tests.

IoT Applications with 5G Connectivity in Medical Tourism Sector Management: Third-Party Service Scenarios.

PubMed

Psiha, Maria M; Vlamos, Panayiotis

2017-01-01

5G is the next generation of mobile communication technology. Current generation of wireless technologies is being evolved toward 5G for better serving end users and transforming our society. Supported by 5G cloud technology, personal devices will extend their capabilities to various applications, supporting smart life. They will have significant role in health, medical tourism, security, safety, and social life applications. The next wave of mobile communication is to mobilize and automate industries and industry processes via Machine-Type Communication (MTC) and Internet of Things (IoT). The current key performance indicators for the 5G infrastructure for the fully connected society are sufficient to satisfy most of the technical requirements in the healthcare sector. Thus, 5G can be considered as a door opener for new possibilities and use cases, many of which are as yet unknown. In this paper we present heterogeneous use cases in medical tourism sector, based on 5G infrastructure technologies and third-party cloud services.

Automatic control model of water filling system with Allen Bradley Micrologix 1400 PLC

NASA Astrophysics Data System (ADS)

Harahap, R.; Adyatma, AF; Fahmi, F.

2018-02-01

Programmable Logic Controller or PLC today plays an important role in most industrial control systems. PLC usage can be encountered in almost all fields of industry, not only in the manufacturing world but also on many other things such as elevators in office buildings, hotels hospitals, and others. PLC is an electronic control tool that operates in logic that its programming can be modified with relative ease. As with any controller in general, the PLC processes input signals to further discharge output according to the desired program. PLC usage is very broad because of its high reliability, can be reprogrammed or modified with relative ease, and very helpful in the tracking troubleshooting. One type of existing PLC is Allen Bradley PLC. Allen Bradley PLC program is commonly used in various industries. PLC Allen Bradley (AB) has several types, and one of them is the type of Micrologic 1400. In this study we design a system as a comparison with the conventional system. For that to explore the use of a PLC program which will be supported by a simulator tool, including a program to RSLogic 500, how to programming, monitoring via RSView32, and modification. It is expected to understand the application aspect of operation and programming of this specific PLC and its potential. The purpose of this research is to design water filling automation system by using Allen Bradley Micrologic 1400 type 1766-L32BXB PLC, empowering the use of Allen Bradley Micrologic 1400 PLC and to regulate the desired process to obtain efficiency and effectiveness compared with conventional system arrangement using Relay.

Prioritizing prevention opportunities in the Washington State construction industry, 2003-2007.

PubMed

Schoonover, Todd; Bonauto, David; Silverstein, Barbara; Adams, Darrin; Clark, Randy

2010-06-01

This study compares construction industry groups in Washington State by injury severity and cost, and ranks industry groups according to potential for prevention. All Washington State workers' compensation compensable claims with date of injury between 2003 and 2007 were classified into North American Industrial Classification System (NAICS) industry groups. Claims were then aggregated by injury type and industry groups were ranked according to a prevention index (PI). The PI is the average of the rank orders of the claim count and the claim incidence rate. A lower PI indicates a higher need for prevention activities. The severity rate was calculated as the number of days of time loss per 10,000 full-time equivalents (FTEs). For all injury types, construction industry groups occupy 7 of the top 15 PI ranks in Washington State. The severity rate among construction industry groups was twice that for non-construction groups for all injury types. Foundation, structure, and building exterior contractors (NAICS 2381) ranked highest in prevention potential and severity among construction industry groups for most common injury types including falls from elevation, fall on same level, struck by/against, and musculo-skeletal disorders of the neck, back, and upper extremity (WMSDs). Median claim costs by injury type were generally higher among construction industry groups. The construction industry in Washington State has a high severity rate and potential for prevention. The methods used for characterizing these industry groups can be adapted for comparison within and between other industries and states. These data can be used by industry groups and employers to identify higher cost and higher severity injury types. Knowledge about the relative frequencies and costs associated with different injury types will help employers and construction industry associations make better informed decisions about where prevention efforts are most needed and may have the greatest impact. The results of this study can also be used by industry stakeholders to cooperatively focus on high cost and high severity injuries and explore best practices, interventions, and solutions as demonstrated by efforts to prevent musculoskeletal disorders in masonry (Entzel, Albers, & Welch, 2007). Initiating construction industry groups to focus on high cost and high severity injuries may also help prevent other types of injuries. (c) 2010 National Safety Council. Published by Elsevier Ltd. All rights reserved.

Characterization of Effect of Support Structures in Laser Additive Manufacturing of Stainless Steel

NASA Astrophysics Data System (ADS)

Järvinen, Jukka-Pekka; Matilainen, Ville; Li, Xiaoyun; Piili, Heidi; Salminen, Antti; Mäkelä, Ismo; Nyrhilä, Olli

Laser additive manufacturing (LAM) of stainless steel is a layer wisetechnology for fabricating 3D parts from metal powder via selectively melting powder with laser beam. Support structures play a significant role in LAM process as they help to remove heat away from the process and on the other hand hold the work piece in its place. A successful design of support structures can help to achievea building process fast and inexpensive with high quality. Aimof this study was to characterize the usability of two types of support structures: web and tube supports. Purpose of this studywas also to analyze how suitable they are in two industrial application cases: case for dental application and case for jewelry application. It was concluded that the removability of web supports was much better than tube supports. It was noticed that support structures are an important part of LAM process and they strongly affect the manufacturability and the end quality of the part.

Who supports whom? Gender and intergenerational transfers in post-industrial Barbados.

PubMed

Quashie, Nekehia T

2015-06-01

This study examines the likelihood that older adults and their children in Bridgetown, Barbados engage in exchanges of financial, functional, and material support and the extent to which gender influences transfers. Data come from the 2000 Survey of Health, Well-Being and Aging in Latin America and the Caribbean (SABE) of Bridgetown, Barbados N = 3876 children, representing 1135 families. Multivariate logistic regression models examine the demographic and economic situations of both older and younger cohorts that encourage or constrain intergenerational exchanges. Results confirm, as in many developing countries, a higher proportion of older Barbadians receive rather than provide support. Gender differentiation in support transfers depends on the type of support examined and the living arrangements of parents and children. Support exchanges are highly conditioned by the socioeconomic circumstances of both generations but gender stratification in the labor market does not appear to mediate support exchanges. These findings suggest some flexibility in gender systems with respect to intergenerational support within Barbado.

The Education Review Board: A Mechanism for Managing Potential Conflicts of Interest in Medical Education.

PubMed

Borus, Jonathan F; Alexander, Erik K; Bierer, Barbara E; Bringhurst, F Richard; Clark, Christopher; Klanica, Kaley E; Stewart, Erin C; Friedman, Lawrence S

2015-12-01

Concerns about the influence of industry support on medical education, research, and patient care have increased in both medical and political circles. Some academic medical centers, questioning whether industry support of medical education could be appropriate and not a conflict of interest, banned such support. In 2009, a Partners HealthCare System commission concluded that interactions with industry remained important to Partners' charitable academic mission and made recommendations to transparently manage such relationships. An Education Review Board (ERB) was created to oversee and manage all industry support of Partners educational activities.Using a case review method, the ERB developed guidelines to implement the commission's recommendations. A multi-funder rule was established that prohibits industry support from only one company for any Partners educational activity. Within that framework, the ERB established guidelines on industry support of educational conferences, clinical fellowships, and trainees' expenses for attending external educational programs; gifts of textbooks and other educational materials; promotional opportunities associated with Partners educational activities; Partners educational activities under contract with an industry entity; and industry-run programs using Partners resources.Although many changes have resulted from the implementation of the ERB guidelines, the number of industry grants for Partners educational activities has remained relatively stable, and funding for these activities declined only moderately during the first three full calendar years (2011-2013) of ERB oversight. The ERB continually educates both the Partners community and industry about the rationale for its guidelines and its openness to their refinement in response to changes in the external environment.

Borehole Shear Device Phase II Development.

DTIC Science & Technology

1982-02-01

FIGURE 8 ITEM QUANTITY DESCRIPTION B1 1 Torque/Normal Load Transducer - First Extension Coupling. B2 1 Torque/Normal Load Transducer - Gauge Tube. B3 I...235, type RFN 7012. Supplier - Ringfeder Limited, Forum Drive, Midland Indus- trial Estate, Rugby , Warwickshire CV21 iNT, UK. FB 1 Expanding Friction...Midland Industrial Estate, Rugby , Warwickshire CV21 INT, UK. GF 2 Deep Groove Ball Bearing (upper support bearing), 80 x 100 x 10. Supplier - SKF ref

Flight Dynamics Analysis Branch End of Fiscal Year 2004 Report

NASA Technical Reports Server (NTRS)

DeLion, Anne (Editor); Stengle, Thomas

2005-01-01

This report summarizes the major activities and accomplishments carried out by the Flight Dynamics Analysis Branch (FDAB), Code 595, in support of flight projects and technology development initiatives in Fiscal Year (FY) 2004. The report is intended to serve as a summary of the type of support carried out by the FDAB, as well as a concise reference of key accomplishments and mission experience derived from the various mission support roles. The primary focus of the FDAB is to provide expertise in the disciplines of flight dynamics including spacecraft navigation (autonomous and ground based); spacecraft trajectory design and maneuver planning; attitude analysis; attitude determination and sensor calibration; and attitude control subsystem (ACS) analysis and design. The FDAB currently provides support for missions and technology development projects involving NASA, other government agencies, academia, and private industry.

Flight Dynamics Analysis Branch End of Fiscal Year 2005 Report

NASA Technical Reports Server (NTRS)

2006-01-01

This report summarizes the major activities and accomplishments carried out by the Flight Dynamics Analysis Branch (FDAB), Code 595, in support of flight projects and technology development initiatives in Fiscal Year (FY) 2005. The report is intended to serve as a summary of the type of support carried out by the FDAB, as well as a concise reference of key accomplishments and mission experience derived from the various mission support roles. The primary focus of the FDAB is to provide expertise in the disciplines of flight dynamics including spacecraft navigation (autonomous and ground based), spacecraft trajectory design and maneuver planning, attitude analysis, attitude determination and sensor calibration, and attitude control subsystem (ACS) analysis and design. The FDAB currently provides support for missions and technology development projects involving NASA, other government agencies, academia, and private industry.

DOE/Industry Matching Grant Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

John C. Lee

2003-09-30

For the academic year 2001-2002, the Department of Nuclear Engineering and Radiological Sciences received $50,000 of industrial contributions, matched by a DOE grant of $35,000. We used the combined DOE/Industry Matching Grant of $85,000 toward (a) undergraduate merit scholarships and research support, (b) graduate student support, and (c) partial support of a research scientist.

Simulation Modeling of Resilience Assessment in Indonesian Fertiliser Industry Supply Networks

NASA Astrophysics Data System (ADS)

Utami, I. D.; Holt, R. J.; McKay, A.

2018-01-01

Supply network resilience is a significant aspect in the performance of the Indonesian fertiliser industry. Decision makers use risk assessment and port management reports to evaluate the availability of infrastructure. An opportunity was identified to incorporate both types of data into an approach for the measurement of resilience. A framework, based on a synthesis of literature and interviews with industry practitioners, covering both social and technical factors is introduced. A simulation model was then built to allow managers to explore implications for resilience and predict levels of risk in different scenarios. Result of interview with respondens from Indonesian fertiliser industry indicated that the simulation model could be valuable in the assessment. This paper provides details of the simulation model for decision makers to explore levels of risk in supply networks. For practitioners, the model could be used by government to assess the current condition of supply networks in Indonesian industries. On the other hand, for academia, the approach provides a new application of agent-based models in research on supply network resilience and presents a real example of how agent-based modeling could be used as to support the assessment approach.

The nature and influence of pharmaceutical industry involvement in asthma trials

PubMed Central

Bond, Kenneth; Spooner, Carol; Tjosvold, Lisa; Lemière, Catherine; Rowe, Brian H

2012-01-01

BACKGROUND: Pharmaceutical industry-sponsored research has been shown to be biased toward reporting positive results. Frequent industry participation in trials assessing the efficacy of inhaled corticosteroid (ICS) and long-acting beta2-agonist (LABA) combination treatment makes assessing industry influence difficult and warrants an assessment of specific potential publication bias in this area. OBJECTIVE: To describe the frequency of industry involvement in ICS/LABA trials and explore associations among significant outcomes, type of industry involvement and type of primary outcome. METHODS: A systematic review of trials comparing ICS/LABA combination therapy with ICS monotherapy for asthma was conducted. Data concerning the type of industry sponsorship, primary outcome and statistical results were collected. Comparisons between type of sponsorship and significant results were analyzed using Pearson’s χ2 test and relative risk. RESULTS: Of 91 included studies (median year of publication 2005 [interquartile range 1994 to 2008]), 86 (95%) reported pharmaceutical involvement. Author affiliation was reported in 49 of 86 (57%), and 19 of 86 (22%) were industry-reported trials without full publications. The remainder were published journal articles. Studies with a first or senior author affiliated with industry were 1.5 times more likely to report statistically significant results for the primary outcome compared with studies with other types of industry involvement. Pulmonary measures were 1.5 times more likely to be statistically significant than were measures of asthma control. CONCLUSIONS: The potential biases identified were consistent with other research focused on author role and industry involvement, and suggest that degree of bias may vary with type of affiliation. PMID:22891187

Design of a professional development and support program for future photonics industry team leaders

NASA Astrophysics Data System (ADS)

Hall-Wallace, Michelle; Regens, Nancy L.; Pompea, Stephen M.

2002-05-01

The University of Arizona's Collaboration to Advance Teaching Technology and Science (CATTS) program sponsored by the National Science Foundation has found a successful way to unite public and charter school students and teachers, university science outreach programs, graduate and undergraduate students, and university faculty for the betterment of science education. A key aspect of this success has been the ability of the project to assist stakeholders in understanding the different cultural perspectives of all of the participants. The success of this program has led us to create a template for a professional development and support program emphasizing the degree of cross-cultural understanding appropriate for today's multinational photonics industry. This template is designed to give future photonics technical, managerial, and manufacturing leaders training in a variety of areas that can enhance their productivity and ability to lead teams. The design would be appropriate for photonics research and development teams, sales and marketing teams, teams with diverse members new college hires, and newly emplaced managers. This education template would also be appropriate for students in photonics industry technician and graduate- level programs. This type of program is not a substitute for other forms of professional managerial training, but rather augments such programs with material that can aid in a more global perspective.

Ergonomic Redesign of an Industrial Control Panel.

PubMed

Raeisi, S; Osqueizadeh, R; Maghsoudipour, M; Jafarpisheh, A S

2016-07-01

Operator's role in industrial control centers takes place in time, which is one of the most important determinants of whether an expected action is going to be successful or not. In certain situations, due to the complex nature of the work, the existing interfaces and already prepared procedures do not meet the dynamic requirements of operator's cognitive demands, making the control tasks unnecessarily difficult. This study was conducted to identify ergonomic issues with a specific industrial control panel, and redesign its layout and elements to enhance its usability. Task and link analysis methodologies were implemented. All essential functions and supporting operations were identified at the required trivial levels. Next, the weight of any possible link between the elements of the panel was computed as a composite index of frequency and importance. Finally, all components were rearranged within a new layout, and a computerized mockup was generated. A total of 8 primary tasks was identified, including 4 system failure handling tasks, switching between manual and automated modes, and 3 types of routine vigilance and control tasks. These tasks were broken down into 28 functions and 145 supporting operations, accordingly. Higher link values were observed between hand rest position and 2 elements. Also, 6 other components showed robust linkages. In conclusion, computer modeling can reduce the likelihood of accidents and near misses in industrial control rooms by considering the operators' misperception or mental burden and correcting poor design of the panels and inappropriate task allocation.

Role of heterogeneous research and development funds in the productivity of the US manufacturing industry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rhee, C.O.

1987-01-01

This paper investigates, in the framework of firm's optimal behavior, the effect of company-funded and federally-funded RandD on productivity in selected US industries. Especially, the role of federal funding RandD in productivity through direct as well as indirect mechanisms is analyzed. Using different model specification, two types of RandD-federal and company, and data of industry level, no support can be found for the blanket statement that federally-funded RandD (FRD) crowds out or pulls in company-funding RandD in productivity growth. Whether crowding-out or pulling-in is shown to be industry-specific as well as based on FRD's time dimension. Hence, the lag effectmore » of heterogeneous RandD funds on productivity is emphasized. The classification of heterogeneous RandD funds into basic research, applied research, and development is adopted to look at the impact of each on productivity. The model of firm's optimal behavior following such classification demonstrates that federally-funded basic research has a tremendous pulling-in impact on company-funded applied research and development, respectively.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Speer, B.; Mendelsohn, M.; Cory, K.

Insuring solar photovoltaic (PV) systems poses certain challenges. Insurance premiums, which can represent a significant part of overall costs for PV developers, can affect market competition. The market for certain types of insurance products is limited. Historical loss data is lacking, and test data for the long-term viability of PV products under real-life conditions is limited. Insurers' knowledge about PV systems and the PV industry is uneven even as the industry introduces innovative contractual structures and business models. Interviews conducted for this report with PV project developers, insurance brokers, and underwriters suggest government actions aimed at better testing, data collection,more » and communication could facilitate the development of a market for PV insurance products. This report identifies actions by governments, national laboratories, and other stakeholders that could accelerate the development of insurance products in support PV systems. Such actions include: increasing understanding of the solar PV industry among insurance professionals; expanding the availability of PV historical loss data; evaluating the expansion of renewable energy business classification; developing module and component testing capabilities and services offered by federal labs; and, advancing industry standards for PV system installers.« less

Biobanking trends, challenges, and opportunities.

PubMed

Mackenzie, Fiona

2014-01-01

To review the different interests and needs of industry and academic users of human biomaterials. A review of the current literature and interviews with involved parties. Questionnaires were e-mailed to assess current attitudes towards biobanking and opinions of trends and implications for the future. The organisations included commercial biobanks, charitable foundations, academic biobanks, and hospital sites. Biobanks have the potential to have a critical impact across several industrial sectors, and their future success will depend on satisfying the differing needs of each group. There is a growing need for greater collaboration between researchers and biobanks, and if the involvement of industry is not sought by biobanks to create conditions that support the effective use of resources, there is a risk that samples will not be collected or used to the best advantage. It is evident that industry can play a vital role in the innovation process of biobanking, both in terms of the collecting and processing methods and the nature of the disease and sample types collected. With this feedback, biobanks can be utilised effectively to advance research to the benefits of all to the best advantage.

The American biodefense industry: from emergency to nonemergence.

PubMed

Lentzos, Filippa

2007-03-01

Since 1998, and especially since the "Amerithrax" emergency of 2001, the United States has ambitiously funded biodefense projects, intending not only to enhance detection and management of any biological-weapons attack but also to establish a robust domestic biodefense industry. I asked if the United States had fulfilled this latter intention. Using the RAND Corporation's RaDiUS database, I examined federal biodefense grants and contracts awarded from 1995 through most of 2005, noting recipient type, awarding unit, funding level, and the disease focus of research-and-development support. Patterns in these data as well as other sources suggest that the biodefense industry as late as 2005 remained in a nascent stage, with most firms small, precariously financed, and more responsive to funders' announcements and solicitations than to opportunities for self-directed innovation. A biodefense industry with investor-capital funding and retained earnings, with its own leading companies, with its own stock analysts, and with its own legitimacy in commercial and financial markets did not emerge over the period studied, nor does its emergence appear imminent.

Perspective from Western Canada and the Canadian meat industry.

PubMed

Classen, H L; Schwean, K V

1998-02-01

The Canadian broiler chicken and turkey industries are distributed approximately according to human population. Individual components of these industries tend to be smaller than their U.S. counterparts and not to be vertically integrated. The outlook of the poultry meat industries is positive because of increasing per capita consumption of chicken and the potential for gains in turkey consumption. The number of permanently employed poultry scientists at publicly funded institutions has declined in Western Canada. University training in Poultry Science is restricted to four major institutions where it has been integrated into Animal Science and Veterinary Medicine programs. For the most part, poultry scientists have developed successful research programs and this research has been enhanced by scientists employed in term positions. Publicly funded poultry extension has declined but this reduction has been compensated to some degree by industry-sponsored programs and the private sector. The majority of research funding, which was once derived from government, is now provided by industry; government contributions are frequently contingent on initial industry support. The consequence of this type of funding arrangement is a trend to more short-term and less long-term research. Canada has no strategic plan regarding poultry training, research, or extension and this needs to be addressed before there is a further reduction in the country's infrastructure. Modern communication technology offers promise to reduce the isolation of scientists in different parts of Canada.

Device Oriented Project Controller

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dalesio, Leo; Kraimer, Martin

2013-11-20

This proposal is directed at the issue of developing control systems for very large HEP projects. A de-facto standard in accelerator control is the Experimental Physics and Industrial Control System (EPICS), which has been applied successfully to many physics projects. EPICS is a channel based system that requires that each channel of each device be configured and controlled. In Phase I, the feasibility of a device oriented extension to the distributed channel database was demonstrated by prototyping a device aware version of an EPICS I/O controller that functions with the current version of the channel access communication protocol. Extensions havemore » been made to the grammar to define the database. Only a multi-stage position controller with limit switches was developed in the demonstration, but the grammar should support a full range of functional record types. In phase II, a full set of record types will be developed to support all existing record types, a set of process control functions for closed loop control, and support for experimental beam line control. A tool to configure these records will be developed. A communication protocol will be developed or extensions will be made to Channel Access to support introspection of components of a device. Performance bench marks will be made on both communication protocol and the database. After these records and performance tests are under way, a second of the grammar will be undertaken.« less

Biliary PAH metabolites and the hepatosomatic index of brown bullheads from Lake Erie tributaries

USGS Publications Warehouse

Yang, X.; Baumann, P.C.

2006-01-01

In studies designed to investigate the environmental exposure of fish in Lake Erie tributaries, a benthic fish, the brown bullhead (Ameiurus nebulosus), was collected from the industrially contaminated Detroit River, Ottawa River, Black River, Cuyahoga River-harbor and -upstream, Ashtabula River, Buffalo River, and Niagara River, and the non-industrialized Old Woman Creek during 1997-2000. Biliary benzo[a]pyrene (B[a]P)- and naphthalene (NAPH)-type metabolites and the hepatosomatic index (HSI) were measured in fish and compared between different sites. Fish from all of the contaminated sites except Niagara River had significantly higher concentrations of both types of polycyclic aromatic hydrocarbon (PAH) metabolites than fish from the Old Woman Creek. Concentrations of PAH metabolites in bile of fish were positively associated with concentrations of PAHs in sediments, supporting the use of bile metabolites as a measure of PAH exposure. Relatively low concentrations of PAHs detected in fish bile and sediments of the Niagara River, which had undergone extensive remediation, suggested a lowered PAH exposure for fish at this site. No apparent trend was observed in HSI between the industrialized and non-industrialized sites. This study demonstrates that biliary PAH metabolites are an effective indicator of exposure of fish to PAHs. However, because factors other than contamination could also affect the liver size of wild fish, HSI alone may be not a reliable biomarker for assessing contaminant stress. ?? 2005 Elsevier Ltd. All rights reserved.

Human Reliability and the Cost of Doing Business

NASA Technical Reports Server (NTRS)

DeMott, Diana

2014-01-01

Most businesses recognize that people will make mistakes and assume errors are just part of the cost of doing business, but does it need to be? Companies with high risk, or major consequences, should consider the effect of human error. In a variety of industries, Human Errors have caused costly failures and workplace injuries. These have included: airline mishaps, medical malpractice, administration of medication and major oil spills have all been blamed on human error. A technique to mitigate or even eliminate some of these costly human errors is the use of Human Reliability Analysis (HRA). Various methodologies are available to perform Human Reliability Assessments that range from identifying the most likely areas for concern to detailed assessments with human error failure probabilities calculated. Which methodology to use would be based on a variety of factors that would include: 1) how people react and act in different industries, and differing expectations based on industries standards, 2) factors that influence how the human errors could occur such as tasks, tools, environment, workplace, support, training and procedure, 3) type and availability of data and 4) how the industry views risk & reliability influences ( types of emergencies, contingencies and routine tasks versus cost based concerns). The Human Reliability Assessments should be the first step to reduce, mitigate or eliminate the costly mistakes or catastrophic failures. Using Human Reliability techniques to identify and classify human error risks allows a company more opportunities to mitigate or eliminate these risks and prevent costly failures.

Toxicity Identification and Evaluation for the Effluent from Wastewater Treatment Plant in Industrial Complex using D.magna

NASA Astrophysics Data System (ADS)

Lee, S.; Keum, H.; Chun Sang, H.

2015-12-01

In recent years, the interests on the impacts of industrial wastewater on aquatic ecosystem have increased with concern about ecosystem protection and human health. Whole effluent toxicity tests are used to monitor toxicity by unknown toxic chemicals as well as conventional pollutants from industrial effluent discharges. This study describes the application of TIE (toxicity identification evaluation) procedures to an acutely toxic effluent from a wastewater treatment plant in industrial complex which was toxic to Daphnia magna. In TIE phase I (characterization step), the toxic effects by heavy metals, organic compounds, oxidants, volatile organic compounds, suspended solids and ammonia were screened and revealed that the source of toxicity is far from these toxicants group. Chemical analysis (TIE phase II) on TDS showed that the concentration of chloride ion (6,900 mg/L) was substantially higher than that predicted from EC50 for D. magna. In confirmation step (TIE phase III), chloride ion was demonstrated to be main toxicant in this effluent by the spiking approach, species sensitivity approach and deletion approach. Calcium, potassium, magnesium, sodium, fluorine, sulfate ion concentration (450, 100, 80, 5,300, 0.66, 2,200mg/L) was not shown toxicity from D. magna. Finally, we concluded that chloride was the most contributing toxicant in the waste water treatment plant. Further research activities are needed for technical support of toxicity identification and evaluation on the various types of wastewater treatment plant discharge in Korea. Keywords : TIE, D. magna, Industrial waste water Acknowledgement This research was supported by a grant (15IFIP-B089908-02) from Plant Research Program funded by Ministry of Land, Infrastructure and Transport of Korean government

Advancements in n-Type Base Crystalline Silicon Solar Cells and Their Emergence in the Photovoltaic Industry

PubMed Central

ur Rehman, Atteq; Lee, Soo Hong

2013-01-01

The p-type crystalline silicon wafers have occupied most of the solar cell market today. However, modules made with n-type crystalline silicon wafers are actually the most efficient modules up to date. This is because the material properties offered by n-type crystalline silicon substrates are suitable for higher efficiencies. Properties such as the absence of boron-oxygen related defects and a greater tolerance to key metal impurities by n-type crystalline silicon substrates are major factors that underline the efficiency of n-type crystalline silicon wafer modules. The bi-facial design of n-type cells with good rear-side electronic and optical properties on an industrial scale can be shaped as well. Furthermore, the development in the industrialization of solar cell designs based on n-type crystalline silicon substrates also highlights its boost in the contributions to the photovoltaic industry. In this paper, a review of various solar cell structures that can be realized on n-type crystalline silicon substrates will be given. Moreover, the current standing of solar cell technology based on n-type substrates and its contribution in photovoltaic industry will also be discussed. PMID:24459433

Advancements in n-type base crystalline silicon solar cells and their emergence in the photovoltaic industry.

PubMed

ur Rehman, Atteq; Lee, Soo Hong

2013-01-01

The p-type crystalline silicon wafers have occupied most of the solar cell market today. However, modules made with n-type crystalline silicon wafers are actually the most efficient modules up to date. This is because the material properties offered by n-type crystalline silicon substrates are suitable for higher efficiencies. Properties such as the absence of boron-oxygen related defects and a greater tolerance to key metal impurities by n-type crystalline silicon substrates are major factors that underline the efficiency of n-type crystalline silicon wafer modules. The bi-facial design of n-type cells with good rear-side electronic and optical properties on an industrial scale can be shaped as well. Furthermore, the development in the industrialization of solar cell designs based on n-type crystalline silicon substrates also highlights its boost in the contributions to the photovoltaic industry. In this paper, a review of various solar cell structures that can be realized on n-type crystalline silicon substrates will be given. Moreover, the current standing of solar cell technology based on n-type substrates and its contribution in photovoltaic industry will also be discussed.

Are industry financial ties associated with greater scholarly impact among academic otolaryngologists?

PubMed

Svider, Peter F; Bobian, Michael; Lin, Ho-Sheng; Setzen, Michael; Baredes, Soly; Eloy, Jean Anderson; Folbe, Adam J

2017-01-01

In response to concerns regarding physician-industry relationships, the Physician Sunshine Act of 2010 was passed in an effort to increase transparency and accountability. Our objective was to determine whether there is an association between industry support and scholarly impact among academic otolaryngologists. Faculty listings, academic rank, and fellowship training of academic otolaryngologists were accessed from departmental websites. H-indices, number of publications, and publication range (years) of each individual were calculated using the Scopus database. The Center for Medicare and Medicaid Services Open Payments database was used to determine industry payments during 2014 to each otolaryngologist. Of 1,515 otolaryngologists, 65.4% received industry support and 15.8% received support > $1,000. No difference in impact, as measured by the h-index, was noted upon comparison of those receiving support and those who did not (P > 0.05). Individuals receiving > $1,000 had higher h-indices and total publications than those receiving < $1,000 or receiving no support (H = 17.8 vs. 10.9, P < 0.0001), even upon controlling for academic seniority. Upon organization by subspecialty, individuals receiving > $1,000 had greater scholarly impact among most subspecialties. Industry contributions increased with advancing experience. Receiving industry contributions greater than $1,000 is associated with greater scholarly impact among academic otolaryngologists. In a smaller surgical specialty, such as otolaryngology-head and neck surgery, direct industry research support-as well as indirect contributions through the support of educational programs, consulting, and other expenses-potentially impacts scholarly discourse; these findings do not reflect a causal relationship and may require further characterization. NA Laryngoscope, 127:87-94, 2017. © 2016 The American Laryngological, Rhinological and Otological Society, Inc.

Analysis of Plastics Industries in the Major Industrial Countries

DOT National Transportation Integrated Search

1981-01-01

This report provides data needed to support an assessment of the relative position of the US plastics resins industry, on a worldwide basis, in terms of its being able to support automotive manufacturing operations. The use of plastics in US and fore...

Analyzing the development of Indonesia shrimp industry

NASA Astrophysics Data System (ADS)

Wati, L. A.

2018-04-01

This research aimed to analyze the development of shrimp industry in Indonesia. Porter’s Diamond Theory was used for analysis. The Porter’s Diamond theory is one of framework for industry analysis and business strategy development. The Porter’s Diamond theory has five forces that determine the competitive intensity in an industry, namely (1) the threat of substitute products, (2) the threat of competition, (3) the threat of new entrants, (4) bargaining power of suppliers, and (5) bargaining power of consumers. The development of Indonesian shrimp industry pretty good, explained by Porter Diamond Theory analysis. Analysis of Porter Diamond Theory through four main components namely factor conditions; demand condition; related and supporting industries; and firm strategy, structure and rivalry coupled with a two-component supporting (regulatory the government and the factor of chance). Based on the result of this research show that two-component supporting (regulatory the government and the factor of chance) have positive. Related and supporting industries have negative, firm and structure strategy have negative, rivalry has positive, factor condition have positive (except science and technology resources).

The Vector, Signal, and Image Processing Library (VSIPL): an Open Standard for Astronomical Data Processing

NASA Astrophysics Data System (ADS)

Kepner, J. V.; Janka, R. S.; Lebak, J.; Richards, M. A.

1999-12-01

The Vector/Signal/Image Processing Library (VSIPL) is a DARPA initiated effort made up of industry, government and academic representatives who have defined an industry standard API for vector, signal, and image processing primitives for real-time signal processing on high performance systems. VSIPL supports a wide range of data types (int, float, complex, ...) and layouts (vectors, matrices and tensors) and is ideal for astronomical data processing. The VSIPL API is intended to serve as an open, vendor-neutral, industry standard interface. The object-based VSIPL API abstracts the memory architecture of the underlying machine by using the concept of memory blocks and views. Early experiments with VSIPL code conversions have been carried out by the High Performance Computing Program team at the UCSD. Commercially, several major vendors of signal processors are actively developing implementations. VSIPL has also been explicitly required as part of a recent Rome Labs teraflop procurement. This poster presents the VSIPL API, its functionality and the status of various implementations.

Survey on Intelligent Assistance for Workplace Learning in Software Engineering

NASA Astrophysics Data System (ADS)

Ras, Eric; Rech, Jörg

Technology-enhanced learning (TEL) systems and intelligent assistance systems aim at supporting software engineers during learning and work. A questionnaire-based survey with 89 responses from industry was conducted to find out what kinds of services should be provided and how, as well as to determine which software engineering phases they should focus on. In this paper, we present the survey results regarding intelligent assistance for workplace learning in software engineering. We analyzed whether specific types of assistance depend on the organization's size, the respondent's role, and the experience level. The results show a demand for TEL that supports short-term problem solving and long-term competence development at the workplace.

CPOE: a clear purpose plus top-notch technical support equals high physician adoption.

PubMed

Birk, Susan

2010-01-01

As with any fundamental change, the transition to computerized physician order entry [CPOE] is not a risk-free endeavor, major questions hover around this facet of the arduous and controversial paper-to-electronic conversion currently preoccupying the healthcare industry: Could physician over-reliance on electronic prompts actually lead to an increase in some types of medical errors? Could automated workstations ultimately hinder safety and the delivery of quality care by diminishing face-to-face communication and nuanced discussions? In an ironic twist, could electronic solutions insidiously leach creativity, intuition and judgment from good medicine by keeping physicians tied to tools that consume their time but do not offer effective clinical decision support?

EADS Roadmap for Launch Vehicles

NASA Astrophysics Data System (ADS)

Eymar, Patrick; Grimard, Max

2002-01-01

still think about the future, especially at industry level in order to make the most judicious choices in technologies, vehicle types as well as human resources and facilities specialization (especially after recent merger moves). and production as prime contractor, industrial architect or stage provider have taken benefit of this expertise and especially of all the studies ran under national funding and own financing on reusable vehicles and ground/flight demonstrators have analyzed several scenarios. VEHICLES/ASTRIUM SI strategy w.r.t. launch vehicles for the two next decades. Among the main inputs taken into account of course visions of the market evolutions have been considered, but also enlargement of international cooperations and governments requests and supports (e.g. with the influence of large international ventures). 1 patrick.eymar@lanceurs.aeromatra.com 2

Panel discussions: Industrial support sector requirements

NASA Technical Reports Server (NTRS)

Washom, B.

1982-01-01

Industrial support was the subject of a panel discussion on solar energy technology. Members of various energy-related businesses and agencies were present. Topics cofered include: (1) solar collectors; (2) solar energy policy; (3) government/industry relations; and (4) economic factors which influence the use of solar energy.

Testing For EM Upsets In Aircraft Control Computers

NASA Technical Reports Server (NTRS)

Belcastro, Celeste M.

1994-01-01

Effects of transient electrical signals evaluated in laboratory tests. Method of evaluating nominally fault-tolerant, aircraft-type digital-computer-based control system devised. Provides for evaluation of susceptibility of system to upset and evaluation of integrity of control when system subjected to transient electrical signals like those induced by electromagnetic (EM) source, in this case lightning. Beyond aerospace applications, fault-tolerant control systems becoming more wide-spread in industry; such as in automobiles. Method supports practical, systematic tests for evaluation of designs of fault-tolerant control systems.

An Analysis of the Commercial and Industrial Type Activities Program within the United States Army.

DTIC Science & Technology

1980-06-01

potential Federal Income Tax revenues which would be paid by the contractor are deducted from contracting-out costs. A tax table is provided in the CCH ...head of each federal agency. Past policy had been built on only one precept: reliance on the private sector. Revised A-76 provided a new guiding ...Comparisons To support the increased emphasis on economy of Govern- ment and contract performance, a comprehensive Cost Comparison Handbook ( CCH ) was prepared

[Clinical safety data management in company non-sponsored trials].

PubMed

Saito, Akiko; Sakai, Junko; Kurihara, Masaaki; Kami, Masahiro; Kanda, Yoshinobu; Mori, Shin-ichiro; Takaue, Yoichi; Ohashi, Yasuo

2003-09-01

There is currently no harmonized way in Japan to manage safety data which are obtained during clinical trials supported by Government funds. There are two types of clinical trials, 'sponsored trials(sponsored by industrial companies)' and 'non-sponsored trials(funded by the Government, etc.)'. The Japanese Ministry of Health and Welfare has issued many of pharmaceutical laws(GCP, GPMSP etc.) for the regulation of sponsored trials, while none has ever established for non-sponsored trials, thus leaving the most important quality control/assurance unregulated. In this manuscript we discuss that the simple application of pharmaceutical laws to government-sponsored trials can not be a proper answer because of the different nature of the two types of trials.

World`s first SPB LNG carrier ``POLAR EAGLE``

DOE Office of Scientific and Technical Information (OSTI.GOV)

Aoki, Eiji; Nakajima, Yoshiyuki; Yamada, Koichiro

1994-12-31

The world`s first Self-supporting Prismatic-shape IMO type B (SPB) LNG Carrier named ``POLAR EAGLE`` has been delivered to Phillips 66 Natural Gas Company and Marathon Oil Company in June, 1993. The cargo containment system installed onboard the vessel, SPB cargo containment system, was developed by Ishikawajima-Harima Heavy Industries Co., Ltd. (IHI) and fully complies with IMO Gas Carrier Code for a type B independent tank. ``POLAR EAGLE`` was constructed in the authors` Aichi works and delivered 34 months after the contract of the vessel. Its performance was confirmed through various kinds of tests and inspections during construction of the vessel.more » Results of typical tests and inspections are introduced.« less

As Teachers Tell It: Implementing All Aspects of the Industry. Supporting Materials. [Volume Two.

ERIC Educational Resources Information Center

Andrew, Erika Nielsen, Ed.

This document contains supporting materials from five case studies illustrating the All Aspects of the Industry (AAI) approach. AAI provides a framework for redesigning programs around broadly conceived, interdisciplinary, industry-focused programs and integrating academic and vocational education. Materials from the Boston (Massachusetts) Public…

a Web-Based Framework for Visualizing Industrial Spatiotemporal Distribution Using Standard Deviational Ellipse and Shifting Routes of Gravity Centers

NASA Astrophysics Data System (ADS)

Song, Y.; Gui, Z.; Wu, H.; Wei, Y.

2017-09-01

Analysing spatiotemporal distribution patterns and its dynamics of different industries can help us learn the macro-level developing trends of those industries, and in turn provides references for industrial spatial planning. However, the analysis process is challenging task which requires an easy-to-understand information presentation mechanism and a powerful computational technology to support the visual analytics of big data on the fly. Due to this reason, this research proposes a web-based framework to enable such a visual analytics requirement. The framework uses standard deviational ellipse (SDE) and shifting route of gravity centers to show the spatial distribution and yearly developing trends of different enterprise types according to their industry categories. The calculation of gravity centers and ellipses is paralleled using Apache Spark to accelerate the processing. In the experiments, we use the enterprise registration dataset in Mainland China from year 1960 to 2015 that contains fine-grain location information (i.e., coordinates of each individual enterprise) to demonstrate the feasibility of this framework. The experiment result shows that the developed visual analytics method is helpful to understand the multi-level patterns and developing trends of different industries in China. Moreover, the proposed framework can be used to analyse any nature and social spatiotemporal point process with large data volume, such as crime and disease.

The feasibility of effluent trading in the energy industries

DOE Office of Scientific and Technical Information (OSTI.GOV)

Veil, J.A.

1997-05-01

In January 1996, the U.S. Environmental Protection Agency (EPA) released a policy statement endorsing effluent trading in watersheds, hoping to spur additional interest in the subject. The policy describes five types of effluent trades - point source/point source, point source/nonpoint source, pretreatment, intraplant, and nonpoint source/nonpoint source. This report evaluates the feasibility of effluent trading for facilities in the oil and gas industry (exploration and production, refining, and distribution and marketing segments), electric power industry, and the coal industry (mines and preparation plants). Nonpoint source/nonpoint source trades are not considered since the energy industry facilities evaluated here are all pointmore » sources. EPA has administered emission trading programs in its air quality program for many years. Programs for offsets, bubbles, banking, and netting are supported by federal regulations, and the 1990 Clean Air Act (CAA) amendments provide a statutory basis for trading programs to control ozone and acid rain. Different programs have had varying degrees of success, but few have come close to meeting their expectations. Few trading programs have been established under the Clean Water Act (CWA). One intraplant trading program was established by EPA in its effluent limitation guidelines (ELGs) for the iron and steel industry. The other existing effluent trading programs were established by state or local governments and have had minimal success.« less

Evaluation of a decision support strategy for the control of powdery mildew, Erysiphe necator (Schw.) Burr., in grapevine in the central region of Chile.

PubMed

Valdés-Gómez, Héctor; Araya-Alman, Miguel; Pañitrur-De la Fuente, Carolina; Verdugo-Vásquez, Nicolás; Lolas, Mauricio; Acevedo-Opazo, César; Gary, Christian; Calonnec, Agnès

2017-09-01

The primary strategy to control powdery mildew in Chilean vineyards involves periodic fungicide spraying, which may lead to many environmental and human health risks. This study aimed to implement and evaluate the effectiveness and economic feasibility of a novel decision support strategy (DSS) to limit the number of treatments against this pathogen. An experiment was conducted between the 2010 and 2013 seasons in two irrigated vine fields, one containing a cultivar of Cabernet Sauvignon (CS) and the other a cultivar of Chardonnay (CH). The results showed that the DSS effectively controlled powdery mildew in CS and CH vine fields, as evidenced by a disease severity lower than 3%, which was lower than that observed in untreated vines (approximately 10 and 40% for CS and CH respectively). The DS strategy required the application of only 2-3 fungicide treatments per season in key vine phenological stages, and the cost fluctuated between $US 322 and 415 ha -1 , which was 40-60% cheaper than the traditional strategy employed by vine growers. The decision support strategy evaluated in this trial allows a good control of powdery mildew for various types of epidemic with an early and late initiation. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

5 CFR 532.305 - Dominant industry.

Code of Federal Regulations, 2010 CFR

2010-01-01

....305 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT CIVIL SERVICE REGULATIONS PREVAILING RATE SYSTEMS Determining Rates for Principal Types of Positions § 532.305 Dominant industry. (a)(1) A... principal types of appropriated or nonappropriated fund positions in the specialized industry comprise: (i...

Comparing the engineering program feeders from SiF and convention models

NASA Astrophysics Data System (ADS)

Roongruangsri, Warawaran; Moonpa, Niwat; Vuthijumnonk, Janyawat; Sangsuwan, Kampanart

2018-01-01

This research aims to compare the relationship between two types of engineering program feeder models within the technical education systems of Rajamangala University of Technology Lanna (RMUTL), Chiangmai, Thailand. To illustrate, the paper refers to two typologies of feeder models, which are the convention and the school in factory (SiF) models. The new SiF model is developed through a collaborative educational process between the sectors of industry, government and academia, using work-integrated learning. The research methodology were use to compared features of the the SiF model with conventional models in terms of learning outcome, funding budget for the study, the advantages and disadvantages from the point of view of students, professors, the university, government and industrial partners. The results of this research indicate that the developed SiF feeder model is the most pertinent ones as it meet the requirements of the university, the government and the industry. The SiF feeder model showed the ability to yield positive learning outcomes with low expenditures per student for both the family and the university. In parallel, the sharing of knowledge between university and industry became increasingly important in the process, which resulted in the improvement of industrial skills for professors and an increase in industrial based research for the university. The SiF feeder model meets its demand of public policy in supporting a skilled workforce for the industry, which could be an effective tool for the triple helix educational model of Thailand.

Space Life Support Technology Applications to Terrestrial Environmental Problems

NASA Technical Reports Server (NTRS)

Schwartzkopf, Steven H.; Sleeper, Howard L.

1993-01-01

Many of the problems now facing the human race on Earth are, in fact, life support issues. Decline of air Quality as a result of industrial and automotive emissions, pollution of ground water by organic pesticides or solvents, and the disposal of solid wastes are all examples of environmental problems that we must solve to sustain human life. The technologies currently under development to solve the problems of supporting human life for advanced space missions are extraordinarily synergistic with these environmental problems. The development of these technologies (including both physicochemical and bioregenerative types) is increasingly focused on closing the life support loop by removing and recycling contaminants and wastes to produce the materials necessary to sustain human life. By so doing, this technology development effort also focuses automatically on reducing resupply logistics requirements and increasing crew safety through increased self-sufficiency. This paper describes several technologies that have been developed to support human life in space and illustrates the applicability of the technologies to environmental problems including environmental remediation and pollution prevention.

Through ARIPAR-GIS the quantified area risk analysis supports land-use planning activities.

PubMed

Spadoni, G; Egidi, D; Contini, S

2000-01-07

The paper first summarises the main aspects of the ARIPAR methodology whose steps can be applied to quantify the impact on a territory of major accident risks due to processing, storing and transporting dangerous substances. Then the capabilities of the new decision support tool ARIPAR-GIS, implementing the mentioned procedure, are described, together with its main features and types of results. These are clearly shown through a short description of the updated ARIPAR study (reference year 1994), in which the impact of changes due to industrial and transportation dynamics on the Ravenna territory in Italy were evaluated. The brief explanation of how results have been used by local administrations offers the opportunity to discuss about advantages of the quantitative area risk analysis tool in supporting activities of risk management, risk control and land-use planning.

ANSYS UIDL-Based CAE Development of Axial Support System for Optical Mirror

NASA Astrophysics Data System (ADS)

Yang, De-Hua; Shao, Liang

2008-09-01

The Whiffle-tree type axial support mechanism is widely adopted by most relatively large optical mirrors. Based on the secondary developing tools offered by the commonly used Finite Element Anylysis (FEA) software ANSYS, ANSYS Parametric Design Language (APDL) is used for creating the mirror FEA model driven by parameters, and ANSYS User Interface Design Language (UIDL) for generating custom menu of interactive manner, whereby, the relatively independent dedicated Computer Aided Engineering (CAE) module is embedded in ANSYS for calculation and optimization of axial Whiffle-tree support of optical mirrors. An example is also described to illustrate the intuitive and effective usage of the dedicated module by boosting work efficiency and releasing related engineering knowledge of user. The philosophy of secondary-developed special module with commonly used software also suggests itself for product development in other industries.

The Evolving Manager Stereotype: The Effects of Industry Gender Typing on Performance Expectations for Leaders and Their Teams

ERIC Educational Resources Information Center

Cabrera, Susan F.; Sauer, Stephen J.; Thomas-Hunt, Melissa C.

2009-01-01

This study examined how external evaluators' assessments of a management team and its leader are impacted by congruence between the leader's gender and the gender typing of the industry in which the team works. We experimentally tested our theory using industries that are either male typed or gender neutral, with teams led by male and female…

National Nanotechnology Initiative. Research and Development Supporting the Next Industrial Revolution. Supplement to the President’s 2004 Budget

DTIC Science & Technology

2004-01-01

and Development Supporting the Next Industrial Revolution Supplement to the President’s FY 2004 Budget National Science and Technology Council...potential to profoundly change our economy, to improve our standard of living, and to bring about the next industrial revolution . Nanotechnology: From

New insides in the characterization of HDS industrial catalysts by HAADF-STEM

NASA Astrophysics Data System (ADS)

Del Angel, Paz; Ponce, Arturo; Arellano, Josefina; Yacaman, Miguel J.; Hernandez-Pichardo, Martha; Montoya, J. Ascencion; Escobar, Jose

2015-03-01

Hydrodesulfurization (HDS) catalysts are of great importance in the petroleum industry. Transition metal sulphides catalysts of Ni(Co)Mo(W)/Al2O3 are widely used for hydrotreating reactions, like hydrodenitrogenation and HDS. One of the main issue in these catalysts is to understand the mechanism of the reaction, where MoS2 plays the most important role in the catalytic activity. We studied an industrial NiMo/Alumina sulfide catalyst highly active by using aberration-corrected HAADF-STEM techniques. The used catalysts was a state-of- the art commercial nickel-molybdenum alumina-supported formulation, including organic agent modifier. This type of material belongs to a novel family of catalysts specially designed for ultra-low sulfur production from straight-run gas oil (SRGO), cycle oil, coker gas oil, or their combinations at operating conditions of commercial interest in hydrotreating units at industrial scale. Aberration corrected HAADF-STEM allowed to observe the nanostructure and location of MoS2 and his interaction with the alumina. The results indicate that the MoS2 is highly dispersed on the alumina, however the location of Ni is one of the task of this kind of catalyst.

Production process stability - core assumption of INDUSTRY 4.0 concept

NASA Astrophysics Data System (ADS)

Chromjakova, F.; Bobak, R.; Hrusecka, D.

2017-06-01

Today’s industrial enterprises are confronted by implementation of INDUSTRY 4.0 concept with basic problem - stabilised manufacturing and supporting processes. Through this phenomenon of stabilisation, they will achieve positive digital management of both processes and continuously throughput. There is required structural stability of horizontal (business) and vertical (digitized) manufacturing processes, supported through digitalised technologies of INDUSTRY 4.0 concept. Results presented in this paper based on the research results and survey realised in more industrial companies. Following will described basic model for structural process stabilisation in manufacturing environment.

78 FR 48765 - Petition for Waiver of Compliance

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-09

... safety appliance arrangements on modern railcar types not explicitly covered by 49 CFR Part 231. The Task... all car types, plus industry safety appliance standards for specific car types. These industry... arrangements for individual car types. AAR also included deviation tables that show where the AAR standard...

78 FR 11567 - Airworthiness Directives; Gulfstream Aerospace LP (Type Certificate Previously Held by Israel...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-19

... Airworthiness Directives; Gulfstream Aerospace LP (Type Certificate Previously Held by Israel Aircraft... Aerospace LP (Type Certificate Previously Held by Israel Aircraft Industries, Ltd.) Model Gulfstream G150... Gulfstream Aerospace LP (Type Certificate Previously Held by Israel Aircraft Industries, Ltd.): Amendment 39...

The United States digital recording industry

NASA Technical Reports Server (NTRS)

Simonds, John L.

1993-01-01

The recording industry resembles the semiconductor industry in several aspects. Both are large (greater than $60 Billion/year revenues); both are considered critical technologies supporting national objectives; both are experiencing increased competition from foreign suppliers; they recognize significant opportunities for both technological and market growth in the decade to come; and both realize that a key to this future growth lies in alliances among industry, academia, and government. The semiconductor industry has made significant investments in alliances relating to manufacturing technologies (SEMATECH) and to joint long-term technology research centered in universities (SRC). The federal government has provided funding support of these efforts in recognition of the critical roles semiconductor technologies play in national interests. The recording industry is now also forming critical alliances, but has been slower in starting and in gaining broad recognition by government agencies and legislators that the industry needs federal support. Traditionally, the recording industry has been viewed as mature, stable, and, while critical to national interests, able to chart and fund its own course toward future national needs. That perception is fortunately changing.

Algorithm of choosing type of mechanical assembly production of instrument making enterprises of Industry 4.0

NASA Astrophysics Data System (ADS)

Zakoldaev, D. A.; Shukalov, A. V.; Zharinov, I. O.; Zharinov, O. O.

2018-05-01

The task of the algorithm of choosing the type of mechanical assembly production of instrument making enterprises of Industry 4.0 is being studied. There is a comparison of two project algorithms for Industry 3.0 and Industry 4.0. The algorithm of choosing the type of mechanical assembly production of instrument making enterprises of Industry 4.0 is based on the technological route analysis of the manufacturing process in a company equipped with cyber and physical systems. This algorithm may give some project solutions selected from the primary part or the auxiliary one of the production. The algorithm decisive rules are based on the optimal criterion.

Strategies for sustainable development of industrial park in Ulsan, South Korea--from spontaneous evolution to systematic expansion of industrial symbiosis.

PubMed

Park, Hung-Suck; Rene, Eldon R; Choi, Soo-Mi; Chiu, Anthony S F

2008-04-01

The Korea National Cleaner Production Center (KNCPC) affiliated to the Korea Institute of Industrial Technology (KITECH) has started a 15 year, 3-phase EIP master plan with the support of Ministry of Commerce, Industry, and Energy (MOCIE). A total of 6 industrial parks, including industrial parks in Ulsan city, known as the industrial capital of South Korea, are planning projects to find the feasibility of shifting existing industrial parks to eco-industrial parks. The basic survey shows that Ulsan industrial complex has been continuously evolving from conventional industrial complexes to eco-industrial parks by spontaneous industrial symbiosis. This paper describes the Korean national policies and the developmental activities of this vision to drive the global trend of innovation for converting the existing industrial parks to eco-industrial parks through inter-industry waste, energy, and material exchange in Ulsan Industrial complexes. In addition, the primary and supportive components of the Ulsan EIP pilot project, which will be implemented for 5 years is elaborated with its schedules and economic benefits.

PREVALENCE OF INDUSTRY SUPPORT AND ITS RELATIONSHIP TO RESEARCH INTEGRITY

PubMed Central

Tereskerz, Patricia M.; Hamric, Ann B.; Guterbock, Thomas M.; Moreno, Jonathan D.

2009-01-01

Most U.S. clinical trials are funded by industry. Opportunities exist for sponsors to influence research in ways that jeopardize research objectivity. The purpose of this study was to survey U.S. medical school faculty to assess financial arrangements between investigators and industry to learn about investigators’ first hand knowledge of the effects of industry sponsorship on research. Here we show first-hand knowledge that compromises occurred in: research participants’ well-being (9%), research initiatives (35%), publication of results (28%), interpretation of research data (25%), and scientific advancement (20%) because of industry support. Financial relationships with industry were prevalent and considered important to conducting respondents’ research. PMID:19353387

Advanced Industrial Materials (AIM) Program annual progress report, FY 1997

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1998-05-01

The Advanced Industrial Materials (AIM) Program is a part of the Office of Industrial Technologies (OIT), Energy Efficiency and Renewable Energy, US Department of Energy (DOE). The mission of AIM is to support development and commercialization of new or improved materials to improve energy efficiency, productivity, product quality, and reduced waste in the major process industries. OIT has embarked on a fundamentally new way of working with industries--the Industries of the Future (IOF) strategy--concentrating on the major process industries that consume about 90% of the energy and generate about 90% of the waste in the industrial sector. These are themore » aluminum, chemical, forest products, glass, metalcasting, and steel industries. OIT has encouraged and assisted these industries in developing visions of what they will be like 20 or 30 years into the future, defining the drivers, technology needs, and barriers to realization of their visions. These visions provide a framework for development of technology roadmaps and implementation plans, some of which have been completed. The AIM Program supports IOF by conducting research and development on materials to solve problems identified in the roadmaps. This is done by National Laboratory/industry/university teams with the facilities and expertise needed to develop new and improved materials. Each project in the AIM Program has active industrial participation and support.« less

Moving from Student to Professional: Industry Mentors and Academic Internship Coordinators Supporting Intern Learning in the Workplace

ERIC Educational Resources Information Center

Kramer-Simpson, Elisabeth

2018-01-01

This article offers empirical data to explore ways that both industry mentors and academic internship coordinators support student interns in ways that optimize the workplace experience. Rich description of qualitative data from case studies and interviews shows that to optimize the internship, both the industry mentor and the academic internship…

RE: Request for Correction, Technical Support Document, Greenhouse Gas Emissions Reporting from the Petroleum and Natural Gas Industry

EPA Pesticide Factsheets

The Industrial Energy Consumers of America (IECA) joins the U.S. Chamber of Commerce in its request for correction of information developed by the Environmental Protection Agency (EPA) in a background technical support document titled Greenhouse Gas Emissions Reporting from the Petroleum and Natural Gas Industry

A Review of the Case of a Levy-Grant Scheme (LGS) in the UK Construction Industry

ERIC Educational Resources Information Center

Abdel-Wahab, Mohamed; Dainty, Andrew; Ison, Stephen

2010-01-01

A Levy-Grant Scheme (LGS) has existed in the UK construction industry since 1964 to provide financial support for companies undertaking training activities. Despite the support of the LGS for various training activities, notably apprenticeships, the construction industry continues to suffer from both labour shortages and an under-investment in…

Methodological Quality of Meta-Analyses: Matched-Pairs Comparison over Time and between Industry-Sponsored and Academic-Sponsored Reports

ERIC Educational Resources Information Center

Lane, Peter W.; Higgins, Julian P. T.; Anagnostelis, Betsy; Anzures-Cabrera, Judith; Baker, Nigel F.; Cappelleri, Joseph C.; Haughie, Scott; Hollis, Sally; Lewis, Steff C.; Moneuse, Patrick; Whitehead, Anne

2013-01-01

Context: Meta-analyses are regularly used to inform healthcare decisions. Concerns have been expressed about the quality of meta-analyses and, in particular, about those supported by the pharmaceutical industry. Objective: The objective of this study is to compare the quality of pharmaceutical-industry-supported meta-analyses with academic…

MATWIN: bridging the gap between academic research and industry.

PubMed

Reiffers, Josy; Robert, Lucia

2015-09-16

MATWIN (Maturation and Accelerating Translation With INdustry) is part of the nationwide effort to support cancer innovation. This unique program is willing to support innovative research projects providing tools, resources, and staff dedicated to project leaders wishing to optimize the industrial attractiveness of their project. The overall objective is clear: fight cancer always more effectively.

Benefits Awareness: Educating Industry, Finance, and the Public About Space Commercialization

NASA Technical Reports Server (NTRS)

Powers, Blake; Nall, Mark; Casas, Joseph C.; Henderson, Robin N. (Technical Monitor)

2002-01-01

For space to be truly commercialized, businesses of all sizes and types must be involved, from foundries to agricultural research initiatives. Achieving this goal, however, requires three separate but integrated educational efforts to support it. The first is to educate industry leaders about the possibilities available through such research, while dispelling some of the myths and misinformation educate the financial community about the economic benefits that result both from the research and the leveraging of private research dollars through the use of space and microgravity research. The third is to educate the public about the tangible benefits that come directly to them from such efforts, the economic benefits to national economies from same, and the other less tangible benefits that will cascade from commercial operations. Together, these steps will educate and provide the framework necessary to help advance space commercialization.

Picosecond and femtosecond lasers for industrial material processing

NASA Astrophysics Data System (ADS)

Mayerhofer, R.; Serbin, J.; Deeg, F. W.

2016-03-01

Cold laser materials processing using ultra short pulsed lasers has become one of the most promising new technologies for high-precision cutting, ablation, drilling and marking of almost all types of material, without causing unwanted thermal damage to the part. These characteristics have opened up new application areas and materials for laser processing, allowing previously impossible features to be created and also reducing the amount of post-processing required to an absolute minimum, saving time and cost. However, short pulse widths are only one part of thee story for industrial manufacturing processes which focus on total costs and maximum productivity and production yield. Like every other production tool, ultra-short pulse lasers have too provide high quality results with maximum reliability. Robustness and global on-site support are vital factors, as well ass easy system integration.

A project to transfer technology from NASA centers in support of industrial innovation in the midwest

NASA Technical Reports Server (NTRS)

Barr, B. G.

1986-01-01

A technology transfer program utilizing graduate students in mechanical engineering at the University of Kansas was initiated in early 1981. The objective of the program was to encourage industrial innovation in the Midwest through improved industry/university cooperation and the utilization of NASA technology. A related and important aspect of the program was the improvement of graduate engineering education through the involvement of students in the identification and accomplishment of technological objectives in cooperation with scientists at NASA centers and engineers in industry. The pilot NASA/University Industrial Innovation Program was an outstanding success based on its ability to: attract top graduate students; secure industry support; and stimulate industry/university cooperation leading to enhanced university capability and utilization of advanced technology by industry.

Commercial/industrial photovoltaic module and array requirement study. Low-cost solar array project engineering area

NASA Technical Reports Server (NTRS)

1981-01-01

Design requirements for photovoltaic modules and arrays used in commercial and industrial applications were identified. Building codes and referenced standards were reviewed for their applicability to commercial and industrial photovoltaic array installation. Four general installation types were identified - integral (replaces roofing), direct (mounted on top of roofing), stand-off (mounted away from roofing), and rack (for flat or low slope roofs, or ground mounted). Each of the generic mounting types can be used in vertical wall mounting systems. This implies eight mounting types exist in the commercial/industrial sector. Installation costs were developed for these mounting types as a function of panel/module size. Cost drivers were identified. Studies were performed to identify optimum module shapes and sizes and operating voltage cost drivers. The general conclusion is that there are no perceived major obstacles to the use of photovoltaic modules in commercial/industrial arrays.

Graphical Technique to Support the Teaching/Learning Process of Software Process Reference Models

NASA Astrophysics Data System (ADS)

Espinosa-Curiel, Ismael Edrein; Rodríguez-Jacobo, Josefina; Fernández-Zepeda, José Alberto

In this paper, we propose a set of diagrams to visualize software process reference models (PRM). The diagrams, called dimods, are the combination of some visual and process modeling techniques such as rich pictures, mind maps, IDEF and RAD diagrams. We show the use of this technique by designing a set of dimods for the Mexican Software Industry Process Model (MoProSoft). Additionally, we perform an evaluation of the usefulness of dimods. The result of the evaluation shows that dimods may be a support tool that facilitates the understanding, memorization, and learning of software PRMs in both, software development organizations and universities. The results also show that dimods may have advantages over the traditional description methods for these types of models.

Rapid authentication of adulteration of olive oil by near-infrared spectroscopy using support vector machines

NASA Astrophysics Data System (ADS)

Wu, Jingzhu; Dong, Jingjing; Dong, Wenfei; Chen, Yan; Liu, Cuiling

2016-10-01

A classification method of support vector machines with linear kernel was employed to authenticate genuine olive oil based on near-infrared spectroscopy. There were three types of adulteration of olive oil experimented in the study. The adulterated oil was respectively soybean oil, rapeseed oil and the mixture of soybean and rapeseed oil. The average recognition rate of second experiment was more than 90% and that of the third experiment was reach to 100%. The results showed the method had good performance in classifying genuine olive oil and the adulteration with small variation range of adulterated concentration and it was a promising and rapid technique for the detection of oil adulteration and fraud in the food industry.

Energy Recovery Hydropower: Prospects for Off-Setting Electricity Costs for Agricultural, Municipal, and Industrial Water Providers and Users; July 2017 - September 2017

DOE Office of Scientific and Technical Information (OSTI.GOV)

Levine, Aaron L.; Curtis, Taylor L.; Johnson, Kurt

Energy recovery hydropower is one of the most cost-effective types of new hydropower development because it is constructed utilizing existing infrastructure, and it is typically able to complete Federal Energy Regulatory Commission (FERC) review in 60 days. Recent changes in federal and state policy have supported energy recovery hydropower. In addition, some states have developed programs and policies to support energy recovery hydropower, including resource assessments, regulatory streamlining initiatives, and grant and loan programs to reduce project development costs. This report examines current federal and state policy drivers for energy recovery hydropower, reviews market trends, and looks ahead at futuremore » federal resource assessments and hydropower reform legislation.« less

Entering work: employment outcomes of people with developmental disabilities.

PubMed

Boeltzig, Heike; Timmons, Jaimie C; Butterworth, John

2008-09-01

This paper provides a current snapshot of employment outcomes for individuals with developmental disabilities who had recently entered integrated employment (individual and group supported jobs) with the support of a community rehabilitation provider. Individual outcomes are based on an analysis of the National Survey of Community Rehabilitation Providers conducted between 2004 and 2005 by the Institute for Community Inclusion at the University of Massachusetts in Boston. Survey results show that the majority of respondents with developmental disabilities worked part-time in individual jobs, predominantly in the entry-level service industry; earned above federal minimum wage; and received paid time off. Differences in employment outcomes by type of integrated employment model are discussed. The paper concludes with a discussion of the implications of the findings.

Shiftwork and environment as interactive predictors of work perceptions.

PubMed

Parkes, Katharine R

2003-10-01

Evidence suggests that the work environment may play a role in the elevated risk of adverse health outcomes among shiftworkers compared with dayworkers. Perceived work environment measures (physical stressors, job demand, job control, skill discretion, supervisor support, and safety perceptions) from UK oil industry personnel (N=1,867) were analyzed in relation to shiftwork (day/night rotation vs daywork) and objective work environment (onshore vs offshore). Age, education, job type, and negative affectivity were also included. The Environment * Shiftwork interaction was significant in multivariate tests and in 5 of the 6 univariate analyses. Onshore, shiftworkers perceived their environment significantly less favorably than dayworkers, but differences were less marked offshore. Results are discussed in relation to the demand-control-support model of work stress. 2003 APA

Effects of health and safety problem recognition on small business facility investment

PubMed Central

2013-01-01

Objectives This study involved a survey of the facility investment experiences, which was designed to recognize the importance of health and safety problems, and industrial accident prevention. Ultimately, we hope that small scale industries will create effective industrial accident prevention programs and facility investments. Methods An individual survey of businesses’ present physical conditions, recognition of the importance of the health and safety problems, and facility investment experiences for preventing industrial accidents was conducted. The survey involved 1,145 business operators or management workers in small business places with fewer than 50 workers in six industrial complexes. Results Regarding the importance of occupational health and safety problems (OHS), 54.1% said it was “very important”. Received technical and financial support, and industrial accidents that occurred during the past three years were recognized as highly important for OHS. In an investigation regarding facility investment experiences for industrial accident prevention, the largest factors were business size, greater numbers of industrial accidents, greater technical and financial support received, and greater recognition of the importance of the OHS. The related variables that decided facility investment for industry accident prevention in a logistic regression analysis were the experiences of business facilities where industrial accidents occurred during the past three years, received technical and financial support, and recognition of the OHS. Those considered very important were shown to be highly significant. Conclusions Recognition of health and safety issues was higher when small businesses had experienced industrial accidents or received financial support. The investment in industrial accidents was greater when health and safety issues were recognized as important. Therefore, the goal of small business health and safety projects is to prioritize health and safety issues in terms of business management and recognition of importance. Therefore, currently various support projects are being conducted. However, there are issues regarding the limitations of the target businesses and inadequacies in maintenance and follow-up. Overall, it is necessary to provide various incentives for onsite participation that can lead to increased recognition of health and safety issues and practical investments, while perfecting maintenance and follow up measures by thoroughly revising existing operating systems. PMID:24472180

Effects of health and safety problem recognition on small business facility investment.

PubMed

Park, Jisu; Jeong, Harin; Hong, Sujin; Park, Jong-Tae; Kim, Dae-Sung; Kim, Jongseo; Kim, Hae-Joon

2013-10-23

This study involved a survey of the facility investment experiences, which was designed to recognize the importance of health and safety problems, and industrial accident prevention. Ultimately, we hope that small scale industries will create effective industrial accident prevention programs and facility investments. An individual survey of businesses' present physical conditions, recognition of the importance of the health and safety problems, and facility investment experiences for preventing industrial accidents was conducted. The survey involved 1,145 business operators or management workers in small business places with fewer than 50 workers in six industrial complexes. Regarding the importance of occupational health and safety problems (OHS), 54.1% said it was "very important". Received technical and financial support, and industrial accidents that occurred during the past three years were recognized as highly important for OHS. In an investigation regarding facility investment experiences for industrial accident prevention, the largest factors were business size, greater numbers of industrial accidents, greater technical and financial support received, and greater recognition of the importance of the OHS. The related variables that decided facility investment for industry accident prevention in a logistic regression analysis were the experiences of business facilities where industrial accidents occurred during the past three years, received technical and financial support, and recognition of the OHS. Those considered very important were shown to be highly significant. Recognition of health and safety issues was higher when small businesses had experienced industrial accidents or received financial support. The investment in industrial accidents was greater when health and safety issues were recognized as important. Therefore, the goal of small business health and safety projects is to prioritize health and safety issues in terms of business management and recognition of importance. Therefore, currently various support projects are being conducted. However, there are issues regarding the limitations of the target businesses and inadequacies in maintenance and follow-up. Overall, it is necessary to provide various incentives for onsite participation that can lead to increased recognition of health and safety issues and practical investments, while perfecting maintenance and follow up measures by thoroughly revising existing operating systems.

U.S. Shipping and Shipbuilding: Trends and Policy Choices

DTIC Science & Technology

1984-08-01

FORCE IN THE MARITIME INDUSTRIES, BY TYPE OF EMPLOYMENT •.••••••••••••.•••••••.• 95 TABLE A -8. MILITARIL Y USEFUL U.S.-FLAG CARGO SHIPS , COMPARISON...through higher prices arising from increased shipping costs. These expenses certainly raise doubts about the commercial advantage of supporting a high ...operations vital to a U.S. war effort. The United States, there- xviii fore, needs a certain number of cargo ships , owned and crewed by Ameri- cans, that

Hermetic turbine generator

DOEpatents

Meacher, John S.; Ruscitto, David E.

1982-01-01

A Rankine cycle turbine drives an electric generator and a feed pump, all on a single shaft, and all enclosed within a hermetically sealed case. The shaft is vertically oriented with the turbine exhaust directed downward and the shaft is supported on hydrodynamic fluid film bearings using the process fluid as lubricant and coolant. The selection of process fluid, type of turbine, operating speed, system power rating, and cycle state points are uniquely coordinated to achieve high turbine efficiency at the temperature levels imposed by the recovery of waste heat from the more prevalent industrial processes.

Using theory to identify beliefs associated with support for policies to raise the price of high-fat and high-sugar foods.

PubMed

Niederdeppe, Jeff; Porticella, Norman; Shapiro, Michael A

2012-01-01

Public policies designed to dramatically raise the price of high-fat and high-sugar foods have received substantial attention from researchers and the media. Although econometric studies suggest that these policies could reduce obesity rates, they are likely to face substantial public opposition. This study used the theory of perceived responsibility and social motivation as a framework to analyze data from a politically diverse convenience sample of 500 adults in upstate New York. The authors examined associations between attribution beliefs and policy support to identify what types of scientific evidence and accompanying messages appear most likely to generate public support for price-raising policies. Results suggest that public health advocates and health communicators could benefit from an increased emphasis on advertising for unhealthy foods as a cause of obesity and the food industry's (manufacturers, advertisers, markets, and restaurants) responsibility for addressing the problem.

Genomics and Transcriptomics Analyses of the Oil-Accumulating Basidiomycete Yeast Trichosporon oleaginosus: Insights into Substrate Utilization and Alternative Evolutionary Trajectories of Fungal Mating Systems

PubMed Central

Bracharz, Felix; Lorenzen, Jan; Kracht, Octavia N.; Chovatia, Mansi; Daum, Chris; Deshpande, Shweta; Lipzen, Anna; Nolan, Matt; Ohm, Robin A.; Grigoriev, Igor V.; Sun, Sheng; Heitman, Joseph

2015-01-01

ABSTRACT Microbial fermentation of agro-industrial waste holds great potential for reducing the environmental impact associated with the production of lipids for industrial purposes from plant biomass. However, the chemical complexity of many residues currently prevents efficient conversion into lipids, creating a high demand for strains with the ability to utilize all energy-rich components of agricultural residues. Here, we present results of genome and transcriptome analyses of Trichosporon oleaginosus. This oil-accumulating yeast is able to grow on a wide variety of substrates, including pentoses and N-acetylglucosamine, making it an interesting candidate for biotechnological applications. Transcriptomics shows specific changes in gene expression patterns under lipid-accumulating conditions. Furthermore, gene content and expression analyses indicate that T. oleaginosus is well-adapted for the utilization of chitin-rich biomass. We also focused on the T. oleaginosus mating type, because this species is a member of the Tremellomycetes, a group that has been intensively analyzed as a model for the evolution of sexual development, the best-studied member being Cryptococcus neoformans. The structure of the T. oleaginosus mating-type regions differs significantly from that of other Tremellomycetes and reveals a new evolutionary trajectory paradigm. Comparative analysis shows that recruitment of developmental genes to the ancestral tetrapolar mating-type loci occurred independently in the Trichosporon and Cryptococcus lineages, supporting the hypothesis of a trend toward larger mating-type regions in fungi. PMID:26199329

The obesogenic environment around elementary schools: food and beverage marketing to children in two Mexican cities.

PubMed

Barquera, Simón; Hernández-Barrera, Lucia; Rothenberg, Stephen J; Cifuentes, Enrique

2018-04-07

Unhealthy environments and food advertisements are major determinants of childhood obesity. Recent regulation has banned unhealthy foods from schools in Mexico. However, currently there is no regulation limiting exposure to food marketing around schools. Thus, our objective was to analyze the characteristics of food advertising practices around 60 elementary schools in two cities and to evaluate compliance with the Pan American Health Organization (PAHO) recommendations and the local food industry self-regulatory marketing code. Data were collected during the period of October 2012 to March 2013. A random sample of elementary schools was selected from two Mexican cities. Using geographic information systems, we drew a 100-m-diameter buffer around each school. Trained personnel obtained photographs to assess the locations and types of food advertisements. Our results were stratified by school type and by indicators of compliance with the PAHO and industry recommendations. We developed a multivariate negative binomial regression model to determine factors predicting the number of advertisements around schools. The number of advertisements was significantly higher around public schools than around private schools (6.5 ± 5.6 vs. 2.4 ± 3.5, p < 0.05). Printed posters were the most common type of marketing medium (97%), showing mostly sugar-sweetened beverages, sweet breads, candies, and bottled water. Promotions, such as special prices or gifts, were included on 30% of printed posters. Food advertising practices were often in compliance with industry recommendations (83%) but not with those from the PAHO (32%) (p < 0.001). Our results support the importance of monitoring the obesogenic environment and identifying policy tools to protect children from food marketing not only inside schools but also around them, particularly in lower income communities.

Commentary: recognizing and tracking philanthropy's critical support of health research.

PubMed

Bond, Queta; Gallin, Elaine K

2012-11-01

Given the current fiscal climate limiting both government and industry support for health research, philanthropic support of health research is increasingly relevant because it provides some of the critical "risk capital" that stimulates innovation, helps translate basic research findings into clinical applications, helps support the career development of investigators, builds new infrastructure, and helps fill key funding gaps. Unfortunately, because of the philanthropic sector's diversity and scope, it is challenging to track the sector's health research investments. The authors briefly review the landscape of philanthropic organizations, identify several success stories resulting from philanthropic investments, and finally underscore the importance of gaining more knowledge about the sector through purposeful data collection efforts such as those of the Health Research Alliance (HRA), a consortium of nonprofit funders of biomedical research and training. Recent HRA efforts of this type are highlighted in this commentary and described in detail in the report by Myers et al in this issue of Academic Medicine.

Market Driven Space Exploration

NASA Astrophysics Data System (ADS)

Gavert, Raymond B.

2004-02-01

Market driven space exploration will have the opportunity to develop to new levels with the coming of space nuclear power and propulsion. NASA's recently established Prometheus program is expected to receive several billion dollars over the next five years for developing nuclear power and propulsion systems for future spacecraft. Not only is nuclear power and propulsion essential for long distance Jupiter type missions, but it also important for providing greater access to planets and bodies nearer to the Earth. NASA has been working with industrial partners since 1987 through its Research Partnerships Centers (RPCs) to utilize the attributes of space in Low Earth Orbit (LEO). Plans are now being made to utilize the RPCs and industrial partners in extending the duration and boundaries of human space flight to create new opportunities for exploration and discovery. Private investors are considering setting up shops in LEO for commercial purposes. The trend is for more industrial involvement in space. Nuclear power and propulsion will hasten the progress. The objective of this paper is to show the progression of space market driven research and its potential for supporting space exploration given nuclear power and propulsion capabilities.

The impact of pharmaceutical company funding on results of randomized trials of nicotine replacement therapy for smoking cessation: a meta-analysis.

PubMed

Etter, Jean-François; Burri, Mafalda; Stapleton, John

2007-05-01

To assess whether source of funding affected the results of trials of nicotine replacement therapy (NRT) for smoking cessation. We reviewed all randomized controlled trials included in the Cochrane review. There were insufficient non-industry trials of the newer products for these to be included. We included 90 trials of either the nicotine gum (52) or nicotine patch (38). They comprised 18 238 treatment and 16 235 control participants. Forty-nine showed evidence of industry support (18 gum, 31 patch). Industry (31 of 49, 63%) compared with non-industry (seven of 41, 17%, P < 0.001) supported a higher proportion of nicotine patch studies and had larger sample sizes (479 versus 268, P = 0.04). Twenty-five (51%) industry trials reported statistically significant (P < 0.05) results, compared with nine (22%) non-industry trials (OR = 3.70, 95% CI = 1.46-9.35). This difference was not explained by trial characteristics. Industry-supported trials had a pooled odds ratio of 1.90 (1.67-2.16), compared with 1.61 (1.43-1.80) for other studies (chi(2) = 3.6, P = 0.058). There was evidence of funnel-plot asymmetry among industry trials (t = 4.35, P < 0.001), but not among other trials, indicating that several small null-effect industry trials may not have reached publication. After imputation adjustment, the odds ratio for industry trials reduced to 1.64 (1.43-1.89) and the overall NRT odds ratio reduced from 1.73 (1.60-1.90) to 1.62 (1.49-1.77). Compared with independent trials, industry-supported trials were more likely to produce statistically significant results and larger odds ratios. These differences persisted after adjustment for basic trial characteristics. Although we had no data on the amount of funding for each trial, it is possible that more resources led to higher treatment compliance and therefore greater efficacy in industry-supported trials. Differences can also possibly be explained by publication bias with several small, null-effect industry studies not having reached publication. After adjustment for this possible bias, results for industry trials were lower and similar to non-industry results. Similarly, the overall estimate of the net effect for these products reduces to about 5% attributable 1-year successes. This remains of considerable public health benefit. Registration of clinical trials has become mandatory in many countries since most of the trials considered here were conducted, and this should reduce the potential for publication bias in future.

Technology transfer from NASA to targeted industries, volume 2

NASA Technical Reports Server (NTRS)

Mccain, Wayne; Schroer, Bernard J.; Souder, William E.; Spann, Mary S.; Watters, Harry; Ziemke, M. Carl

1993-01-01

This volume contains the following materials to support Volume 1: (1) Survey of Metal Fabrication Industry in Alabama; (2) Survey of Electronics Manufacturing/Assembly Industry in Alabama; (3) Apparel Modular Manufacturing Simulators; (4) Synopsis of a Stereolithography Project; (5) Transferring Modular Manufacturing Technology to an Apparel Firm; (6) Letters of Support; (7) Fact Sheets; (8) Publications; and (9) One Stop Access to NASA Technology Brochure.

The declared barriers of the large developing countries waste management projects: The STAR model.

PubMed

Bufoni, André Luiz; Oliveira, Luciano Basto; Rosa, Luiz Pinguelli

2016-06-01

The aim of this study is to investigate and describe the barriers system that precludes the feasibility, or limits the performance of the waste management projects through the analysis of which are the declared barriers at the 432 large waste management projects registered as CDM during the period 2004-2014. The final product is a waste management barriers conceptual model proposal (STAR), supported by literature and corroborated by projects design documents. This paper uses the computer assisted qualitative content analysis (CAQCA) methodology with the qualitative data analysis (QDA) software NVivo®, by 890 fragments, to investigate the motives to support our conclusions. Results suggest the main barriers classification in five types: sociopolitical, technological, regulatory, financial, and human resources constraints. Results also suggest that beyond the waste management industry, projects have disadvantages added related to the same barriers inherent to others renewable energies initiatives. The STAR model sheds some light over the interactivity and dynamics related to the main constraints of the industry, describing the mutual influences and relationships among each one. Future researches are needed to better and comprehensively understand these relationships and ease the development of tools to alleviate or eliminate them. Copyright © 2016 Elsevier Ltd. All rights reserved.

Neural system applied on an invariant industrial character recognition

NASA Astrophysics Data System (ADS)

Lecoeuche, Stephane; Deguillemont, Denis; Dubus, Jean-Paul

1997-04-01

Besides the variety of fonts, character recognition systems for the industrial world are confronted with specific problems like: the variety of support (metal, wood, paper, ceramics . . .) as well as the variety of marking (printing, engraving, . . .) and conditions of lighting. We present a system that is able to solve a part of this problem. It implements a collaboration between two neural networks. The first network specialized in vision allows the system to extract the character from an image. Besides this capability, we have equipped our system with characteristics allowing it to obtain an invariant model from the presented character. Thus, whatever the position, the size and the orientation of the character during the capture are, the model presented to the input of the second network will be identical. The second network, thanks to a learning phase, permits us to obtain a character recognition system independent of the type of fonts used. Furthermore, its capabilities of generalization permit us to recognize degraded and/or distorted characters. A feedback loop between the two networks permits the first one to modify the quality of vision.The cooperation between these two networks allows us to recognize characters whatever the support and the marking.

Flexible Electronics Development Supported by NASA

NASA Technical Reports Server (NTRS)

Baumann, Eric

2014-01-01

The commercial electronics industry is leading development in most areas of electronics for NASA applications; however, working in partnership with industry and the academic community, results from NASA research could lead to better understanding and utilization of electronic materials by the flexible electronics industry. Innovative ideas explored by our partners in industry and the broader U.S. research community help NASA execute our missions and bring new American products and services to the global technology marketplace. [Mike Gazarik, associate administrator for Space Technology, NASA Headquarters, Washington DC] This presentation provides information on NASA needs in electronics looking towards the future, some of the work being supported by NASA in flexible electronics, and the capabilities of the Glenn Research Center supporting the development of flexible electronics.

Proposal for a Standard Format for Neurophysiology Data Recording and Exchange.

PubMed

Stead, Matt; Halford, Jonathan J

2016-10-01

The lack of interoperability between information networks is a significant source of cost in health care. Standardized data formats decrease health care cost, improve quality of care, and facilitate biomedical research. There is no common standard digital format for storing clinical neurophysiologic data. This review proposes a new standard file format for neurophysiology data (the bulk of which is video-electroencephalographic data), entitled the Multiscale Electrophysiology Format, version 3 (MEF3), which is designed to address many of the shortcomings of existing formats. MEF3 provides functionality that addresses many of the limitations of current formats. The proposed improvements include (1) hierarchical file structure with improved organization; (2) greater extensibility for big data applications requiring a large number of channels, signal types, and parallel processing; (3) efficient and flexible lossy or lossless data compression; (4) industry standard multilayered data encryption and time obfuscation that permits sharing of human data without the need for deidentification procedures; (5) resistance to file corruption; (6) facilitation of online and offline review and analysis; and (7) provision of full open source documentation. At this time, there is no other neurophysiology format that supports all of these features. MEF3 is currently gaining industry and academic community support. The authors propose the use of the MEF3 as a standard format for neurophysiology recording and data exchange. Collaboration between industry, professional organizations, research communities, and independent standards organizations is needed to move the project forward.

Does Availability of Worksite Supports for Physical Activity Differ by Industry and Occupation?

PubMed

Dodson, Elizabeth A; Hipp, J Aaron; Lee, Jung Ae; Yang, Lin; Marx, Christine M; Tabak, Rachel G; Brownson, Ross C

2018-03-01

To explore combinations of worksite supports (WSS) for physical activity (PA) that may assist employees in meeting PA recommendations and to investigate how availability of WSS differs across industries and occupations. Cross-sectional. Several Missouri metropolitan areas. Adults employed >20 h/wk outside the home. Survey utilized existing self-reported measures (eg, presence of WSS for PA) and the International Physical Activity Questionnaire. Logistic regression was conducted for 2 outcome variables: leisure and transportation PA. Independent variables included 16 WSS. Of particular interest were interaction effects between WSS variables. Analyses were stratified by 5 occupation and 7 industry types. Overall, 2013 people completed the survey (46% response rate). Often, availability of 1 WSS did not increase the likelihood of meeting PA recommendations, but several pairs of WSS did. For example, in business occupations, the odds of meeting PA recommendations through transportation PA increased when employees had access to showers and incentives to bike/walk (odds ratio [OR] = 1.6; 95% confidence interval [CI] = 1.16-2.22); showers and maps (OR = 1.25; 1.02-1.55); maps and incentives to bike/walk (OR = 1.48; 1.04-2.12). Various combinations of WSS may increase the likelihood that employees will meet PA recommendations. Many are of low or no cost, including flexible time for exercise and maps of worksite-adjacent walk/bike routes. Findings may be instructive for employers seeking to improve employee health through worksite PA.

Biomethane potential of industrial paper wastes and investigation of the methanogenic communities involved.

PubMed

Walter, Andreas; Silberberger, Sandra; Juárez, Marina Fernández-Delgado; Insam, Heribert; Franke-Whittle, Ingrid H

2016-01-01

Cellulose-containing waste products from the agricultural or industrial sector are potentially one of the largest sources of renewable energy on earth. In this study, the biomethane potential (BMP) of two types of industrial paper wastes, wood and pulp residues (WR and PR, respectively), were evaluated under both mesophilic and thermophilic conditions, and various pretreatment methods were applied in the attempt to increase the methane potential during anaerobic digestion. The methanogenic community composition was investigated with denaturing gradient gel electrophoresis (DGGE) and the ANAEROCHIP microarray, and dominant methanogens were quantitated using quantitative PCR. All pretreatments investigated in this study with the exception of the alkaline pretreatment of PR were found to increase the BMP of two paper industry wastes. However, the low recalcitrance level of the PR resulted in the pretreatments being less effective in increasing BMP when compared with those for WR. These results were supported by the physico-chemical data. A combined application of ultrasound and enzymatic pretreatment was found to be the best strategy for increasing methane yields. The retention time of substrates in the reactors strongly influenced the BMP of wastes subjected to the different pretreatments. In sludges from both paper wastes subjected to the various pretreatments, mixotrophic Methanosarcina species were found to dominate the community, accompanied by a consortium of hydrogenotrophic genera. Pretreating industrial paper wastes could be a potentially viable option for increasing the overall degradation efficiency and decreasing reactor retention time for the digestion of complex organic matter such as lignocellulose or hemicellulose. This would help reduce the environmental burden generated from paper production. Although there were minor differences in the methanogenic communities depending on the temperature of anaerobic digestion, there was little effect of substrate and pretreatment type on the community composition. Thus, methanogen community dynamics would not seem to be an appropriate indicator regarding BMP in the AD processes investigated.

Potential environmental effects of energy conservation measures in northwest industries

DOE Office of Scientific and Technical Information (OSTI.GOV)

Baechler, M C; Gygi, K F; Hendrickson, P L

The Bonneville Power Administration (Bonneville) has identified 101 plants in the Pacific Northwest that account for 80% of the region's industrial electricity consumption. These plants offer a precise target for a conservation program. PNL determined that most of these 101 plants were represented by 11 major industries. We then reviewed 36 major conservation technologies used in these 11 industrial settings to determine their potential environmental impacts. Energy efficiency technologies designed for industrial use may result in direct or indirect environmental impacts. Effects may result from the production of the conservation measure technology, changes in the working environment due to differentmore » energy and material requirements, or changes to waste streams. Industry type, work-place conditions, worker training, and environmental conditions inside and outside the plant are all key variables that may affect environmental outcomes. To address these issues this report has three objectives: Describe potential conservation measures that Bonneville may employ in industrial programs and discuss potential primary impacts. Characterize industrial systems and processes where the measure may be employed and describe general environmental issues associated with each industry type. Review environmental permitting, licensing, and other regulatory actions required for industries and summarize the type of information available from these sources for further analysis.« less

The geologic relationships of industrial mineral deposits and asbestos in the western united states

USGS Publications Warehouse

VanGosen, B.S.

2009-01-01

In recent years, U.S. regulatory agencies have placed emphasis on identifying and regulating asbestos dust exposures in the mining environment, with a particular focus upon industrial mineral deposits in which asbestos occurs as an accessory mineral. Because asbestos minerals form in specific geologic environments, only certain predictable types of industrial mineral deposits can potentially host asbestos mineralization. By applying a basic knowledge of asbestos geology, the costly and time consuming efforts of asbestos monitoring and analyses can be directed towards those mineral deposit types most likely to contain asbestos mineralogy, while saving efforts on the mineral deposits that are unlikely to contain asbestos. While the vast majority of industrial mineral deposits in the Western United States are asbestos-free, there are several types that can, in some instances, host asbestos mineralization, or be closely associated with it. These industrial mineral deposits include a few types of aggregate, dimension, and decorative stone, and some deposits of chromite-nickel, magnesite, nepheline syenite, olivine, rare earth elements, talc, vermiculite, and wollastonite.

African American leadership groups: smoking with the enemy

PubMed Central

Yerger, V; Malone, R

2002-01-01

Background: Among all racial and ethnic groups in the USA, African Americans bear the greatest burden from tobacco related disease. The tobacco industry has been highly influential in the African American community for decades, providing funding and other resources to community leaders and emphasising publicly its support for civil rights causes and groups, while ignoring the negative health effects of its products on those it claims to support. However, the industry's private business reasons for providing such support were unknown. Objective: To understand how and for what purposes the tobacco industry sought to establish and maintain relationships with African American leaders. Methods: Review and analysis of over 700 previously secret internal tobacco industry documents available on the internet. Results: The tobacco industry established relationships with virtually every African American leadership organisation and built longstanding social connections with the community, for three specific business reasons: to increase African American tobacco use, to use African Americans as a frontline force to defend industry policy positions, and to defuse tobacco control efforts. Conclusion: As the tobacco industry expands its global reach, public health advocates should anticipate similar industry efforts to exploit the vulnerabilities of marginalised groups. The apparent generosity, inclusion, and friendship proffered by the industry extract a price from groups in the health of their members. Helping groups anticipate such efforts, confront industry co-optation, and understand the hidden costs of accepting tobacco industry largesse should be part of worldwide tobacco control efforts. PMID:12432159

Spatial And Temporal Trends Of Organic Pollutants In Vegetation From Remote And Rural Areas

NASA Astrophysics Data System (ADS)

Bartrons, Mireia; Catalan, Jordi; Penuelas, Josep

2016-05-01

Persistent organic pollutants (POPs) and polycyclic aromatic hydrocarbons (PAHs) used in agricultural, industrial, and domestic applications are widely distributed and bioaccumulate in food webs, causing adverse effects to the biosphere. A review of published data for 1977-2015 for a wide range of vegetation around the globe indicates an extensive load of pollutants in vegetation. On a global perspective, the accumulation of POPs and PAHs in vegetation depends on the industrialization history across continents and distance to emission sources, beyond organism type and climatic variables. International regulations initially reduced the concentrations of POPs in vegetation in rural areas, but concentrations of HCB, HCHs, and DDTs at remote sites did not decrease or even increased over time, pointing to a remobilization of POPs from source areas to remote sites. The concentrations of compounds currently in use, PBDEs and PAHs, are still increasing in vegetation. Differential congener specific accumulation is mostly determined by continent—in accordance to the different regulations of HCHs, PCBs and PBDEs in different countries—and by plant type (PAHs). These results support a concerning general accumulation of toxic pollutants in most ecosystems of the globe that for some compounds is still far from being mitigated in the near future.

Biofilm reactors for industrial bioconversion processes: employing potential of enhanced reaction rates

PubMed Central

Qureshi, Nasib; Annous, Bassam A; Ezeji, Thaddeus C; Karcher, Patrick; Maddox, Ian S

2005-01-01

This article describes the use of biofilm reactors for the production of various chemicals by fermentation and wastewater treatment. Biofilm formation is a natural process where microbial cells attach to the support (adsorbent) or form flocs/aggregates (also called granules) without use of chemicals and form thick layers of cells known as "biofilms." As a result of biofilm formation, cell densities in the reactor increase and cell concentrations as high as 74 gL-1 can be achieved. The reactor configurations can be as simple as a batch reactor, continuous stirred tank reactor (CSTR), packed bed reactor (PBR), fluidized bed reactor (FBR), airlift reactor (ALR), upflow anaerobic sludge blanket (UASB) reactor, or any other suitable configuration. In UASB granular biofilm particles are used. This article demonstrates that reactor productivities in these reactors have been superior to any other reactor types. This article describes production of ethanol, butanol, lactic acid, acetic acid/vinegar, succinic acid, and fumaric acid in addition to wastewater treatment in the biofilm reactors. As the title suggests, biofilm reactors have high potential to be employed in biotechnology/bioconversion industry for viable economic reasons. In this article, various reactor types have been compared for the above bioconversion processes. PMID:16122390

Novel nano-semiconductor film layer supported nano-Pd Complex Nanostructured Catalyst Pd/Ⓕ-MeOx/AC for High Efficient Selective Hydrogenation of Phenol to Cyclohexanone.

PubMed

Si, Jiaqi; Ouyang, Wenbing; Zhang, Yanji; Xu, Wentao; Zhou, Jicheng

2017-04-28

Supported metal as a type of heterogeneous catalysts are the most widely used in industrial processes. High dispersion of the metal particles of supported catalyst is a key factor in determining the performance of such catalysts. Here we report a novel catalyst Pd/Ⓕ-MeO x /AC with complex nanostructured, Pd nanoparticles supported on the platelike nano-semiconductor film/activated carbon, prepared by the photocatalytic reduction method, which exhibited high efficient catalytic performance for selective hydrogenation of phenol to cyclohexanone. Conversion of phenol achieved up to more than 99% with a lower mole ratio (0.5%) of active components Pd and phenol within 2 h at 70 °C. The synergistic effect of metal nanoparticles and nano-semiconductors support layer and the greatly increasing of contact interface of nano-metal-semiconductors may be responsible for the high efficiency. This work provides a clear demonstration that complex nanostructured catalysts with nano-metal and nano-semiconductor film layer supported on high specific surface AC can yield enhanced catalytic activity and can afford promising approach for developing new supported catalyst.

Web-based expert system for foundry pollution prevention

NASA Astrophysics Data System (ADS)

Moynihan, Gary P.

2004-02-01

Pollution prevention is a complex task. Many small foundries lack the in-house expertise to perform these tasks. Expert systems are a type of computer information system that incorporates artificial intelligence. As noted in the literature, they provide a means of automating specialized expertise. This approach may be further leveraged by implementing the expert system on the internet (or world-wide web). This will allow distribution of the expertise to a variety of geographically-dispersed foundries. The purpose of this research is to develop a prototype web-based expert system to support pollution prevention for the foundry industry. The prototype system identifies potential emissions for a specified process, and also provides recommendations for the prevention of these contaminants. The system is viewed as an initial step toward assisting the foundry industry in better meeting government pollution regulations, as well as improving operating efficiencies within these companies.

History and future of mask making

NASA Astrophysics Data System (ADS)

Levy, Ken L.

1996-12-01

The history of the mask industry has three main periods, which I call the Classical Period, the Dark Ages, and the Renaissance, by analogy with those periods in the history of Western Europe. During the Classical Period, people developed 1X masks and the technology to make them. In the Dark Ages, people exploited the equipment developed during the Classical Period to make 5X reduction reticle, ending the nobility of mask making. In today's Renaissance of mask making, a proliferation of mask types is requiring a rebirth of innovation and creativity. The Renaissance resembles the Classical Period: masks are once again strategic, and technological capability is once again the driver. Meanwhile, the mask industry is carrying forward the productivity and efficiency gains it achieved during the Dark Ages. We must create a new business and economic model to support these changes in the characteristics of the marketplace.

The National Geothermal Energy Research Program

NASA Technical Reports Server (NTRS)

Green, R. J.

1974-01-01

The continuous demand for energy and the concern for shortages of conventional energy resources have spurred the nation to consider alternate energy resources, such as geothermal. Although significant growth in the one natural steam field located in the United States has occurred, a major effort is now needed if geothermal energy, in its several forms, is to contribute to the nation's energy supplies. From the early informal efforts of an Interagency Panel for Geothermal Energy Research, a 5-year Federal program has evolved whose objective is the rapid development of a commercial industry for the utilization of geothermal resources for electric power production and other products. The Federal program seeks to evaluate the realistic potential of geothermal energy, to support the necessary research and technology needed to demonstrate the economic and environmental feasibility of the several types of geothermal resources, and to address the legal and institutional problems concerned in the stimulation and regulation of this new industry.

An analytics of electricity consumption characteristics based on principal component analysis

NASA Astrophysics Data System (ADS)

Feng, Junshu

2018-02-01

Abstract . More detailed analysis of the electricity consumption characteristics can make demand side management (DSM) much more targeted. In this paper, an analytics of electricity consumption characteristics based on principal component analysis (PCA) is given, which the PCA method can be used in to extract the main typical characteristics of electricity consumers. Then, electricity consumption characteristics matrix is designed, which can make a comparison of different typical electricity consumption characteristics between different types of consumers, such as industrial consumers, commercial consumers and residents. In our case study, the electricity consumption has been mainly divided into four characteristics: extreme peak using, peak using, peak-shifting using and others. Moreover, it has been found that industrial consumers shift their peak load often, meanwhile commercial and residential consumers have more peak-time consumption. The conclusions can provide decision support of DSM for the government and power providers.

Environmental-Economic Assessment Of Generation, Flow And Efficiency Of Use Of Production And Consumption Waste

NASA Astrophysics Data System (ADS)

Mikhailov, V. G.; Golofastova, N. N.; Galanina, T. V.; Koroleva, T. G.; Mikhailova, Ya S.

2017-01-01

The article deals with the issues of environmental and economic analysis of industrial and economic activities of an enterprise to assess the generation, flow and efficiency of production and consumption waste. The purpose of research is the analysis and the development of theoretical propositions for the functioning of the system of environmental and economic indicators for the effective management of production and consumption waste in the enterprise. The analysis of the existing systems of environmental and economic indicators taking into consideration the industry characteristics and the types of negative impacts is carried out. The main result of the study is the development of the system of environmental and economic indicators of production and consumption waste, adapted to the modern requirements. The results of the study can be recommended to support the effective management decision-making concerning waste management and the establishment of appropriate infrastructure.

Industrial Archaeology, Landscapes, and Historical Knowledge of Sustainability

Treesearch

Donald L. Hardesty

2006-01-01

The emergence of industrial life support systems in the last three centuries dramatically changed humanenvironmental relationships. Industrial landscapes are repositories of historical knowledge about this ecological revolution. The key components of industrial landscapes include landforms (for example, waste rock dumps from mines), industrial buildings and structures...

Latent profile analysis of lifestyle characteristics and health risk behaviors among Koreans who have completed industrial accident care.

PubMed

Choi, Wan-Suk; Moon, Ok-Kon; Yeum, Dong-Moon

2017-10-07

This study investigated the characteristics and health behavior profiles of 1,803 workers who had experienced industrial accidents. Average weekly exercise days, average number of cigarettes smoked per day, average daily sleep duration, and number of days of alcohol consumption were selected to investigate health behavior profiles. Specifically, latent profile analysis was applied to identify the health behavior profiles of people who had completed industrial accident care; the latent classes were the health-conscious type (n=240), the potential-risk type (n=850), and the high-risk type (n=713). Comparison of the health-conscious and potential-risk types indicated that younger subjects, the employed, and those with lower social status and life satisfaction were more likely to be the potential-risk type. Comparison of the health-conscious and high-risk types revealed that males, younger subjects, the employed, those without chronic illnesses, and those with lower social status and life satisfaction were more likely to be the high-risk type. The results suggest that industrial accident victims who have completed accident care have different health behaviors and it is necessary to improve health promotion based on health type characteristics.

Design of thermoelectrically highly efficient Heusler compounds using phase separations and nano-composites under an economic point of view

NASA Astrophysics Data System (ADS)

Balke, Benjamin

Half-Heusler (HH) compounds are one of the most promising candidates for thermoelectric materials for automotive and industrial waste heat recovery applications. In this talk, I will give an overview about our recent investigations of phase separations in HH thermoelectrics, focusing on the ternary system TiNiSn-ZrNiSn-HfNiSn. I will show how we adapted this knowledge to design a p-type HH compound which exhibits a ZT that is increased by 130% compared to the best published bulk p-type Heusler. I will also present how we used the phase separation to design thermoelectric highly efficient nano-composites of different single-phase materials. Since the price for Hafnium doubled within the last year, our research focused on the design of HH compounds without Hafnium. I will present a very recent calculation on ZT per Euro and efficiency per Euro for various materials followed by our latest very promising results for n-type Heusler compunds without Hafnium resulting in 20 times higher ZT/Euro values. These results strongly underline the importance of phase separations as a powerful tool for designing highly efficient materials for thermoelectric applications that fulfill the industrial demands for a thermoelectric converter. The author gratefully acknowledges financial support by the thermoHEUSLER2 Project (Project No. 19U15006F) of the German Federal Ministry of Economics and Technology (BMWi).

The influence of joint technologies on ELV recyclability.

PubMed

Soo, Vi Kie; Compston, Paul; Doolan, Matthew

2017-10-01

Stricter vehicle emission legislation has led to the increasing use of lightweight materials and multi-material concepts to reduce the vehicle mass. To account for the complexity of multi-material vehicle designs, the choice of joining techniques used is becoming more diverse. Moreover, the different material combinations, and their respective joining methods play an important role in determining the potential of full material separation in a closed-loop system. This paper evaluates the types of joining technologies used in the automotive industry, and identifies those that hinder the sorting of ELV materials. The study is based on an industrial shredding trial of car doors. Observations from the case study showed that steel screws and bolts are increasingly used to combine different material types and are less likely to be perfectly liberated during the shredding process. The characteristics of joints that lead to impurities and valuable material losses, such as joint strength, material type, size, diameter, location, and protrusion level, can influence the material liberation in the current sorting practices and thus, lead to ELV waste minimisation. Additionally, the liberation of joints is also affected by the density and thickness of materials being joined. Correlation analyses are carried out to further support the influence of mechanical screws and bolts on material separation efficiencies. The observations are representative of the initial phases of current global ELV sorting practices. Copyright © 2017 Elsevier Ltd. All rights reserved.

Alcohol consumption in the Australian coal mining industry.

PubMed

Tynan, Ross J; Considine, Robyn; Wiggers, John; Lewin, Terry J; James, Carole; Inder, Kerry; Kay-Lambkin, Frances; Baker, Amanda L; Skehan, Jaelea; Perkins, David; Kelly, Brian J

2017-03-01

To investigate patterns of alcohol use within the coal mining industry, and associations with the personal, social, workplace and employment characteristics. 8 mine sites across 3 eastern Australian states were surveyed, selected to encompass key geographic characteristics (accessibility and remoteness) and mine type (open cut and underground). Problematic alcohol use was measured using the Alcohol Use Disorders Identification Test (AUDIT) to determine: (1) overall risky or hazardous drinking behaviour; and (2) frequency of single-occasion drinking (6 or more drinks on 1 occasion). A total of 1457 employees completed the survey, of which 45.7% of male and 17.0% of female participants reported levels of alcohol use within the range considered as risky or hazardous, considerably higher than the national average. Hierarchical linear regression revealed a significant contribution of many individual level factors associated with AUDIT scores: younger age, male, current smoking status; illicit substance use; previous alcohol and other drug use (AOD) problems; and higher psychological distress. Workplace factors associated with alcohol use included working in mining primarily for the high remuneration, and the type of mining, with underground miners reporting higher alcohol use than open-cut miners. Our findings provide support for the need to address alcohol use in the coal mining industry over and above routine on-site testing for alcohol use. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Politics of corporate social control: the federal response to industrial water pollution

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yeager, P.C.

1981-01-01

In the annals of criminology and the sociology of law, the phenomenon of corporate illegalities has been seriously neglected. Moreover, the relatively few social scientific studies of illegal corporate behavior have often approached the subject from limited theoretical perspectives. These studies have generally overlooked a critical element in criminological understanding; the role of law and its administration in generating violation rates that may be said to be characteristic of the prevailing social structure. This dissertation develops an integrated theoretical approach to a type of corporate illegality, environmental pollution. In this approach, law is seen as integral to the understanding ofmore » crime, and both are situated within the broad socio-economic structure of the United States in the latter half of the 20th century. This research first reviews and analyzes the history of the federal government's efforts to control industrial water pollution, seeking to identify the social structural limits on regulatory activity. Statistical analyses of data on the federal processing of industrial pollution violations are then presented, with a view toward analyzing the correlates of both business behavior and the federal response. The analyses test a proposed model of industrial regulation, and provide important support for the perspective linking law and crime.« less

Public perception and attitude towards chemical industry park in Dalian, Bohai Rim.

PubMed

He, Guizhen; Chen, Chunci; Zhang, Lei; Lu, Yonglong

2018-04-01

Recent decade has witnessed accelerating expansion of chemical industry and increasing conflicts between the local citizens, governmental authorities and project developers, especially in some coastal and port cities in China. Development and transformation of chemical industrial parks has been adopted as a national initiative recently. However, there is a paucity of research examining public perspectives on chemical industrial parks and their risks. Aiming to understand public perception, attitude, and response and the factors underlying the support/acceptance of chemical industry park, this paper investigated 418 residents neighboring to two chemical industrial parks, Dalian in Bohai Rim through face-to-face questionnaire survey. The results showed the knowledge of the respondents on the chemical industrial parks development was very limited. The respondents had complex perceptions on the environmental impacts, risks control, social-economic benefits, and problem awareness. The current levels of information disclosure and public participation were very low. The central governmental official (44.3%) was the most trustworthy group by the respondents. Only 5.5% and 23.2% of the respondents supported the construction of a new CIP nearby and far away their homes, whilst 13% thought new CIP project as acceptable. The spearman correlation analysis results showed a strong NIMBY effect (Not In My Backyard). Factor analysis results demonstrated five latent factors: knowledge, benefit, information, trust, and participation. Multiple linear regression analysis indicated how socio-demographic differences and five latent factors might impact on the support/acceptance of the chemical industrial parks. Education level, trust, information, and participation were significant predictors of public support/acceptance level. This study contributes to our limited knowledge and understanding of public sentiments to the chemical industry parks in China. Copyright © 2017 Elsevier Ltd. All rights reserved.

The Production, Value, and Reduction Responsibility of Carbon Emissions through Electricity Consumption of Manufacturing Industries in South Korea and Thailand

NASA Astrophysics Data System (ADS)

Kitikun, Medhawin

This dissertation provides a new method of measuring efforts by manufacturing industries to reduce their emissions by curtailing electricity consumption. Employing comprehensive firm-level data from the National Manufacture Annual Surveys of South Korea and Thailand, I construct the measure from estimates of revenue functions by industry. The data consists of firms from more than 20 industries in each year from 1982 to 2005 for Korea and from 2001 to 2008 for Thailand. With a total of more than two million observations, I estimate revenue functions for each industry and year. Here, I use three inputs: number of employees(L), fixed asset stock(K), and electricity consumption(E) and two types of functional forms to represent each industry's revenue function. Second, under market competitive condition, I find that profit maximizing firms deviated their level of electricity usage in production from the profit-maximizing level during the time period for both countries, and I develop a theoretical framework to explain this behavior. Then, I tested the theory using my empirical models. Results support the notion of a hidden environmental value expressed by firms in the form of voluntary deviations from profit-maximizing levels of input demand. The measure used is the gap between the marginal revenue product of electricity and its price. This gap should increase with income, consistent with the Environmental Kuznets Curve literature. My current model provides considerable support for this proposition. Estimates indicate, in most industries, a negative relationship between per-capita income and emissions. In the final section of the dissertation, I consider the equitable distribution of emissions reduction burden under an international agreement such as the reduction effort, Kyoto Protocol. Both developed and developing countries have to cut their emissions to a specific reduction percentage target. Domestically, I present two extreme scenarios. In the first scenario, manufacturing industries take full responsibility for emissions reductions by curtailing their use of energy without any subsidies from the government. Revenue function estimates provide measures of the differential costs imposed on different industries by emissions reductions. In the second scenario, emissions reductions are achieved by changing the mix of electricity generation technologies used by the power generation sector within the country. For the international case, I focus on the fairness of emission reduction responsibility among countries. To be fair to countries at different levels of development and with different rate of carbon emissions, I propose a new method to adjust the timing and rates of emission reductions based on a lifetime cumulative emission per capita.

Validity and reliability of exposure assessors' ratings of exposure intensity by type of occupational questionnaire and type of rater.

PubMed

Friesen, Melissa C; Coble, Joseph B; Katki, Hormuzd A; Ji, Bu-Tian; Xue, Shouzheng; Lu, Wei; Stewart, Patricia A

2011-07-01

In epidemiologic studies that rely on professional judgment to assess occupational exposures, the raters' accurate assessment is vital to detect associations. We examined the influence of the type of questionnaire, type of industry, and type of rater on the raters' ability to reliably and validly assess within-industry differences in exposure. Our aim was to identify areas where improvements in exposure assessment may be possible. Subjects from three foundries (n = 72) and three textile plants (n = 74) in Shanghai, China, completed an occupational history (OH) and an industry-specific questionnaire (IQ). Six total dust measurements were collected per subject and were used to calculate a subject-specific measurement mean, which was used as the gold standard. Six raters independently ranked the intensity of each subject's current job on an ordinal scale (1-4) based on the OH alone and on the OH and IQ together. Aggregate ratings were calculated for the group, for industrial hygienists, and for occupational physicians. We calculated intra-class correlation coefficients (ICCs) to evaluate the reliability of the raters. We calculated the correlation between the subject-specific measurement means and the ratings to evaluate the raters' validity. Analyses were stratified by industry, type of questionnaire, and type of rater. We also examined the agreement between the ratings by exposure category, where the subject-specific measurement means were categorized into two and four categories. The reliability and validity measures were higher for the aggregate ratings than for the ratings from the individual raters. The group's performance was maximized with three raters. Both the reliability and validity measures were higher for the foundry industry than for the textile industry. The ICCs were consistently lower in the OH/IQ round than in the OH round in both industries. In contrast, the correlations with the measurement means were higher in the OH/IQ round than in the OH round for the foundry industry (group rating, OH/IQ: Spearman rho = 0.77; OH: rho = 0.64). No pattern by questionnaire type was observed for the textile industry (group rating, Spearman rho = 0.50, both assessment rounds). For both industries, the agreement by exposure category was higher when the task was reduced to discriminating between two versus four exposure categories. Assessments based on professional judgment may reduce misclassification by using two or three raters, by using questionnaires that systematically collect task information, and by defining intensity categories that are distinguishable by the raters. However, few studies have the resources to use multiple raters and these additional efforts may not be adequate for obtaining valid subjective ratings. Thus, improving exposure assessment approaches for studies that rely on professional judgment remain an important research need.

Industrial Stormwater Fact Sheet Series

EPA Pesticide Factsheets

Fact sheets for the industrial sectors regulated by the MSGP. Each describes the types of facilities included in the sector, typical pollutants associated with the sector, and types of stormwater control measures used to minimize pollutant discharge.

Quid Pro Quo: Tobacco Companies and the Black Press

PubMed Central

McCandless, Phyra M.; Yerger, Valerie B.

2012-01-01

Objectives. We explored the relationship between tobacco companies and the Black press, which plays an important role in conveying information and opinions to Black communities. Methods. In this archival case study, we analyzed data from internal tobacco industry documents and archives of the National Newspaper Publishers Association (NNPA), the trade association of the Black press. Results. In exchange for advertising dollars and other support, the tobacco industry expected and received support from Black newspapers for tobacco industry policy positions. Beginning in the 1990s, resistance from within the Black community and reduced advertising budgets created counterpressures. The tobacco industry, however, continued to sustain NNPA support. Conclusions. The quid pro quo between tobacco companies and the Black press violated journalistic standards and represented an unequal trade. Although numerous factors explain today's tobacco-related health disparities, the Black press's service to tobacco companies is problematic because of the trust that the community placed in such media. Understanding the relationship between the tobacco industry and the NNPA provides insight into strategies that the tobacco industry may use in other communities and countries. PMID:21852652

Quid pro quo: tobacco companies and the black press.

PubMed

McCandless, Phyra M; Yerger, Valerie B; Malone, Ruth E

2012-04-01

We explored the relationship between tobacco companies and the Black press, which plays an important role in conveying information and opinions to Black communities. In this archival case study, we analyzed data from internal tobacco industry documents and archives of the National Newspaper Publishers Association (NNPA), the trade association of the Black press. In exchange for advertising dollars and other support, the tobacco industry expected and received support from Black newspapers for tobacco industry policy positions. Beginning in the 1990s, resistance from within the Black community and reduced advertising budgets created counterpressures. The tobacco industry, however, continued to sustain NNPA support. The quid pro quo between tobacco companies and the Black press violated journalistic standards and represented an unequal trade. Although numerous factors explain today's tobacco-related health disparities, the Black press's service to tobacco companies is problematic because of the trust that the community placed in such media. Understanding the relationship between the tobacco industry and the NNPA provides insight into strategies that the tobacco industry may use in other communities and countries.

Cell immobilization for production of lactic acid biofilms do it naturally.

PubMed

Dagher, Suzanne F; Ragout, Alicia L; Siñeriz, Faustino; Bruno-Bárcena, José M

2010-01-01

Interest in natural cell immobilization or biofilms for lactic acid fermentation has developed considerably over the last few decades. Many studies report the benefits associated with biofilms as industrial methods for food production and for wastewater treatment, since the formation represents a protective means of microbial growth offering survival advantages to cells in toxic environments. The formation of biofilms is a natural process in which microbial cells adsorb to a support without chemicals or polymers that entrap the cells and is dependent on the reactor environment, microorganism, and characteristics of the support. These unique characteristics enable biofilms to cause chronic infections, disease, food spoilage, and devastating effects as in microbial corrosion. Their distinct resistance to toxicity, high biomass potential, and improved stability over cells in suspension make biofilms a good tool for improving the industrial economics of biological lactic acid production. Lactic acid bacteria and specific filamentous fungi are the main sources of biological lactic acid. Over the past two decades, studies have focused on improving the lactic acid volumetric productivity through reactor design development, new support materials, and improvements in microbial production strains. To illustrate the operational designs applied to the natural immobilization of lactic acid producing microorganisms, this chapter presents the results of a search for optimum parameters and how they are affected by the physical, chemical, and biological variables of the process. We will place particular emphasis upon the relationship between lactic acid productivity attained by various types of reactors, supports, media formulations, and lactic acid producing microorganisms. Copyright (c) 2010 Elsevier Inc. All rights reserved.

The Proliferation of PDC-Type Environments in Industry and Universities

NASA Technical Reports Server (NTRS)

Shishko, R.

2000-01-01

JPL's Project Design Cenger (PDC), opened in 1994, has become a model for other facilities of the same type in the aerospace industry. More recently, PDC-type environments have been adopted by some university aerospace departments as an educational tool. This paper discusses some of these facilities and their possible future direction.

77 FR 60124 - Draft Guidance for Industry on Initial Completeness Assessments for Type II Active Pharmaceutical...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-02

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2012-D-1010] Draft Guidance for Industry on Initial Completeness Assessments for Type II Active Pharmaceutical... certain drug master files, namely, Type II active pharmaceutical ingredient (API) drug master files (DMFs...

Personality Type and Temperament in Industrial Education Students: A Descriptive Study.

ERIC Educational Resources Information Center

Edmunds, Neil; Schultz, Andrew

1989-01-01

Using Myers-Briggs Type Inventory, authors studied 213 industrial education students in 22 secondary schools in Nebraska to ascertain whether the inventory placed students proportionately into same categories as Myers-Briggs normative group--defined by Keirsey. Large numbers of Sensory Thinker (ST) type found in 60 percent of classes. STs aimed…

76 FR 41432 - Airworthiness Directives; Gulfstream Aerospace LP (Type Certificate Previously Held by Israel...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-14

... Aerospace LP (Type Certificate Previously Held by Israel Aircraft Industries, Ltd.) Model Galaxy, Gulfstream... Aerospace LP (Type Certificate previously held by Israel Aircraft Industries, Ltd.) Model Galaxy airplanes... Bulletin 150-27- 123, Revision 1, dated January 27, 2011. (2) For Model Galaxy and Gulfstream 200 airplanes...

From whom do older persons prefer support? The case of rural Thailand.

PubMed

Rittirong, Jongjit; Prasartkul, Pramote; Rindfuss, Ronald R

2014-12-01

This study explores rural elderly preferences for support across a multi-dimensional measure of elderly care needs. Applying a framework developed in the U.S. to Thailand for the first time, five diverse types of support are considered: meal preparation, personal care, transportation, financial support, and emotional support. The emphasis is on preferences for care and not actual care received. The data are from focus group discussions conducted in seven villages in Nang Rong district, northeastern Thailand. Thailand and the study site represent the social and economic conditions faced by many rapidly industrializing places-where there has been a dramatic demographic transition (lowered fertility and substantial out-migration), growing numbers of older persons remaining in rural settings, and limited publically-financed elderly care or market-based elder care available for purchase. For this study, in each village, male and female older persons aged 60 and over participated in the focus group discussions. As part of the discussion, focus group participants were asked to rank their first four preferences by type of support. Male and female older persons' preferences were slightly different for genderized tasks. In addition, social closeness and geographical proximity mattered. Traditional matrilocal residence patterns contributed to the perceptions of the older persons. Neighbors were preferred when kin were not available. Preferences inform strategic choices by older persons given the context of available resources. Understanding preferences and strategic choices among the older persons can help policy makers tailor programs more effectively and efficiently, without jeopardizing elderly well-being. Copyright © 2014. Published by Elsevier Inc.

On "black swans" and "perfect storms": risk analysis and management when statistics are not enough.

PubMed

Paté-Cornell, Elisabeth

2012-11-01

Two images, "black swans" and "perfect storms," have struck the public's imagination and are used--at times indiscriminately--to describe the unthinkable or the extremely unlikely. These metaphors have been used as excuses to wait for an accident to happen before taking risk management measures, both in industry and government. These two images represent two distinct types of uncertainties (epistemic and aleatory). Existing statistics are often insufficient to support risk management because the sample may be too small and the system may have changed. Rationality as defined by the von Neumann axioms leads to a combination of both types of uncertainties into a single probability measure--Bayesian probability--and accounts only for risk aversion. Yet, the decisionmaker may also want to be ambiguity averse. This article presents an engineering risk analysis perspective on the problem, using all available information in support of proactive risk management decisions and considering both types of uncertainty. These measures involve monitoring of signals, precursors, and near-misses, as well as reinforcement of the system and a thoughtful response strategy. It also involves careful examination of organizational factors such as the incentive system, which shape human performance and affect the risk of errors. In all cases, including rare events, risk quantification does not allow "prediction" of accidents and catastrophes. Instead, it is meant to support effective risk management rather than simply reacting to the latest events and headlines. © 2012 Society for Risk Analysis.

Guest authorship and ghostwriting in publications related to rofecoxib: a case study of industry documents from rofecoxib litigation.

PubMed

Ross, Joseph S; Hill, Kevin P; Egilman, David S; Krumholz, Harlan M

2008-04-16

Authorship in biomedical publication provides recognition and establishes accountability and responsibility. Recent litigation related to rofecoxib provided a unique opportunity to examine guest authorship and ghostwriting, practices that have been suspected in biomedical publication but for which there is little documentation. To characterize different types and the extent of guest authorship and ghostwriting in 1 case study. Court documents originally obtained during litigation related to rofecoxib against Merck & Co Inc. Documents were created predominantly between 1996 and 2004. In addition, publicly available articles related to rofecoxib identified via MEDLINE. All documents were reviewed by one author, with selected review by coauthors, using an iterative process of review, discussion, and rereview of documents to identify information related to guest authorship or ghostwriting. Approximately 250 documents were relevant to our review. For the publication of clinical trials, documents were found describing Merck employees working either independently or in collaboration with medical publishing companies to prepare manuscripts and subsequently recruiting external, academically affiliated investigators to be authors. Recruited authors were frequently placed in the first and second positions of the authorship list. For the publication of scientific review papers, documents were found describing Merck marketing employees developing plans for manuscripts, contracting with medical publishing companies to ghostwrite manuscripts, and recruiting external, academically affiliated investigators to be authors. Recruited authors were commonly the sole author on the manuscript and offered honoraria for their participation. Among 96 relevant published articles, we found that 92% (22 of 24) of clinical trial articles published a disclosure of Merck's financial support, but only 50% (36 of 72) of review articles published either a disclosure of Merck sponsorship or a disclosure of whether the author had received any financial compensation from the company. This case-study review of industry documents demonstrates that clinical trial manuscripts related to rofecoxib were authored by sponsor employees but often attributed first authorship to academically affiliated investigators who did not always disclose industry financial support. Review manuscripts were often prepared by unacknowledged authors and subsequently attributed authorship to academically affiliated investigators who often did not disclose industry financial support.

Optical media standards for industry

NASA Technical Reports Server (NTRS)

Hallam, Kenneth J.

1993-01-01

Optical storage is a new and growing area of technology that can serve to meet some of the mass storage needs of the computer industry. Optical storage is characterized by information being stored and retrieved by means of diode lasers. When most people refer to optical storage, they mean rotating disk media, but there are 1 or 2 products that use lasers to read and write to tape. Optical media also usually means removable media. Because of its removability, there is a recognized need for standardization, both of the media and of the recording method. Industry standards can come about in one or more different ways. An industry supported body can sanction and publish a formal standard. A company may ship enough of a product that it so dominates an application or industry that it acquires 'standard' status without an official sanction. Such de facto standards are almost always copied by other companies with varying degrees of success. A governmental body can issue a rule or law that requires conformance to a standard. The standard may have been created by the government, or adopted from among many proposed by industry. These are often known as de jure standards. Standards are either open or proprietary. If approved by a government or sanctioning body, the standard is open. A de facto standard may be either open or proprietary. Optical media is too new to have de facto standards accepted by the marketplace yet. The proliferation of non-compatible media types in the last 5 years of optical market development have convinced many of the need for recognized media standards.

Managing the Partnership between Higher Education and Industry.

ERIC Educational Resources Information Center

Matthews, Jana B.; Norgaard, Rolf

Ways to develop and manage partnerships between colleges and industry are discussed. The broad educational, economic, social, and political contexts supporting such partnerships are reviewed, along with the important supporting roles of government and third parties. The dynamics of different partnership arrangements are examined, including…

A new type industrial total station based on target automatic collimation

NASA Astrophysics Data System (ADS)

Lao, Dabao; Zhou, Weihu; Ji, Rongyi; Dong, Dengfeng; Xiong, Zhi; Wei, Jiang

2018-01-01

In the case of industrial field measurement, the present measuring instruments work with manual operation and collimation, which give rise to low efficiency for field measurement. In order to solve the problem, a new type industrial total station is presented in this paper. The new instrument can identify and trace cooperative target automatically, in the mean time, coordinate of the target is measured in real time. For realizing the system, key technology including high precision absolutely distance measurement, small high accuracy angle measurement, target automatic collimation with vision, and quick precise controlling should be worked out. After customized system assemblage and adjustment, the new type industrial total station will be established. As the experiments demonstrated, the coordinate accuracy of the instrument is under 15ppm in the distance of 60m, which proved that the measuring system is feasible. The result showed that the total station can satisfy most industrial field measurement requirements.

Unhealthy partnerships: the tobacco industry and African American and Latino labor organizations.

PubMed

Raebeck, Annaebel; Campbell, Richard; Balbach, Edith

2010-04-01

The tobacco industry in the 1980s began to form relationships with outside groups for assistance on key policy issues due to its own poor credibility in the policy arena. This strategy allowed the industry to advance its own interests while seeming to match the agendas of very different organizations. Between 1988 and 1998, the tobacco industry developed coalitions with the A. Philip Randolph Institute (APRI), representing African American trade unionists, and the Labor Coalition on Latin American Advancement (LCLAA), representing Latino trade unionists. APRI and LCLAA each adopted resolutions supporting industry positions on smokefree worksites and excise taxes, issues on which they had not previously taken positions, and promoted these positions to their members, political leaders and the public. They also supported the industry's youth programs. This research relied upon a review of background literature and document searches through the Legacy Tobacco Documents Library and Tobacco Documents Online to examine the development of the excise tax coalition. The tobacco industry built support with APRI and LCLAA by framing policy positions in line with the organizations' interests, creating institutional arrangements that circumvented direct funding from the industry, and enhancing the industry's ability to influence excise tax debates indirectly. Although tobacco control advocates do not have the financial resources of the tobacco industry at their disposal, they can learn from tobacco industry techniques as they seek to build coalitions with people of color in the labor movement. Tobacco control advocates can both counter tobacco industry issue frames and also align their interests with those of working people of color by working on other issues of interest to this population, including health care and worker health and safety.

Subsea approach to work systems development

NASA Technical Reports Server (NTRS)

Gernhardt, M. L.; Frisbie, F. R.; Brown, C. E.

1988-01-01

Self-contained undersea working environments with applications to space station EVA environments are discussed. Physiological limitations include decompression, inert gas narcosis, high-pressure nervous system, gas toxicity, and thermal limitations. Work task requirements include drilling support, construction, inspection, and repair. Work systems include hyperbaric diving, atmospheric work systems, tele-operated work systems, and hybrid systems. Each type of work system is outlined in terms of work capabilities, special interface requirements, and limitations. Various operational philosophies are discussed. The evolution of work systems in the subsea industry has been the result of direct operational experience in a competitive market.

Design and development of Building energy simulation Software for prefabricated cabin type of industrial building (PCES)

NASA Astrophysics Data System (ADS)

Zhang, Jun; Li, Ri Yi

2018-06-01

Building energy simulation is an important supporting tool for green building design and building energy consumption assessment, At present, Building energy simulation software can't meet the needs of energy consumption analysis and cabinet level micro environment control design of prefabricated building. thermal physical model of prefabricated building is proposed in this paper, based on the physical model, the energy consumption calculation software of prefabricated cabin building(PCES) is developed. we can achieve building parameter setting, energy consumption simulation and building thermal process and energy consumption analysis by PCES.

Underwater Sound Propagation Modeling Methods for Predicting Marine Animal Exposure.

PubMed

Hamm, Craig A; McCammon, Diana F; Taillefer, Martin L

2016-01-01

The offshore exploration and production (E&P) industry requires comprehensive and accurate ocean acoustic models for determining the exposure of marine life to the high levels of sound used in seismic surveys and other E&P activities. This paper reviews the types of acoustic models most useful for predicting the propagation of undersea noise sources and describes current exposure models. The severe problems caused by model sensitivity to the uncertainty in the environment are highlighted to support the conclusion that it is vital that risk assessments include transmission loss estimates with statistical measures of confidence.

Trends in funding, internationalization, and types of study for original articles published in five implant-related journals between 2005 and 2009.

PubMed

Barão, Valentim Adelino Ricardo; Shyamsunder, Nodesh; Yuan, Judy Chia-Chun; Knoernschild, Kent L; Assunção, Wirley Gonçalves; Sukotjo, Cortino

2012-01-01

The aims of this study were to evaluate the trends in funding, geographic origin, and study types of original articles in the dental implant literature and to investigate the relationships among these factors. Articles published in Clinical Oral Implants Research, The International Journal of Oral and Maxillofacial Implants, Clinical Implant Dentistry and Related Research, Implant Dentistry, and Journal of Oral Implantology from 2005 to 2009 were reviewed. Nonoriginal articles were excluded. For each article included, extramural funding source, geographic origin, and study type were recorded. Descriptive and analytic analyses (α = .05), including a logistic regression analysis, and chi-square test were used where appropriate. Of a total of 2,085 articles published, 1,503 met the inclusion criteria. The most common source of funding was from industry (32.4%). The proportion of studies that reported funding increased significantly over time. Europe represented the highest percentage (55.8%) of published articles. Most of the articles reported on clinical studies (49.9%), followed by animal studies (25.9%). Articles from Asia and South America and animal and in vitro studies were significantly more likely to be funded. Almost half of the original dental implant articles were funded. The trend toward internationalization of authorship was evident. A strong association was observed between funding and geographic origin and between funding and study type. Most studies in North America and Europe were clinical studies and supported by industry, whereas a greater proportion of studies in Asia and South America were in vitro or animal studies funded through government resources.

The minicell TMirradiator: A new system for a new market

NASA Astrophysics Data System (ADS)

Clouser, James F.; Beers, Eric W.

1998-06-01

Since the commissioning of the first industrial Gamma Irradiator design, designers and operators of irradiation systems have been attempting to meet the specific production requirements and challenges presented to them. This objective has resulted in many different versions of irradiators currently in service today, all of which had original charters and many of which still perform very well within even the new requirements of this industry. Continuing changes in the marketplace have, however, placed pressures on existing designs due to a combination of changing dose requirements for sterlization, increased economic pressures from the specific industry served for both time and location and the increasing variety of product types requiring processing. Additionally, certain market areas which could never economically support a typical gamma processing facility have either not been serviced, or have forced potential gamma users to transport product long distances to one of these existing facilities. The MiniCell TM removes many of the traditional barriers previously accepted in the radiation processing industry for building a processing facility in a location. Its reduced size and cost have allowed many potential users to consider in-house processing and its ability to be quickly assembled allow it to meet market needs in a much more timely fashion than the previous designs. The MiniCell system can cost effectively meet many of the current market needs of reducing total cost of processing and also be flexible enough to process product in a wide range of industries effectively.

State Electricity Profiles

EIA Publications

2017-01-01

The annual report presents data tables describing the electricity industry in each State. Data include: summary statistics; the 10 largest plants by generating capacity; the top five entities ranked by sector; electric power industry generating capacity by primary energy source; electric power industry generation by primary energy source; utility delivered fuel prices for coal, petroleum, and natural gas; electric power industry emissions estimates; retail sales, revenue, and average retail price by sector; retail electricity sales statistics; and supply and disposition of electricity; net metering counts and capacity by technology and customer type; and advanced metering counts by customer type.

Editorial input for the right price: tobacco industry support for a sheet metal indoor air quality manual.

PubMed

Campbell, Richard; Balbach, Edith

2013-01-01

Following legal action in the 1990s, internal tobacco industry documents became public, allowing unprecedented insight into the industry's relationships with outside organizations. During the 1980s and 1990s, the National Energy Management Institute (NEMI), established by the Sheet Metal Workers International Association and the Sheet Metal and Air Conditioning Contractors' National Association, (SMACNA) received tobacco industry funding to establish an indoor air quality services program. But the arrangement also required NEMI to serve as an advocate for industry efforts to defeat indoor smoking bans by arguing that ventilation was a more appropriate solution to environmental tobacco smoke. Drawing on tobacco industry documents, this paper describes a striking example of the ethical compromises that accompanied NEMI's collaboration with the tobacco industry, highlighting the solicitation of tobacco industry financial support for a SMACNA indoor air quality manual in exchange for sanitizing references to the health impact of environmental tobacco smoke prior to publication.

78 FR 54197 - Energy Efficiency Program for Commercial and Industrial Equipment: Energy Conservation Standards...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-03

.... EERE-2013-BT-STD-0030] RIN 1904-AD01 Energy Efficiency Program for Commercial and Industrial Equipment... Certain Industrial Equipment,'' a program covering certain commercial and industrial equipment (hereafter... (AEMTCA), Public Law 112-210 (Dec. 18, 2012). EPCA covers many types of commercial and industrial...

Industry Employment

ERIC Educational Resources Information Center

Occupational Outlook Quarterly, 2012

2012-01-01

This article illustrates projected employment change by industry and industry sector over 2010-20 decade. Workers are grouped into an industry according to the type of good produced or service provided by the establishment for which they work. Industry employment projections are shown in terms of numeric change (growth or decline in the total…

Rethinking Apprenticeship Training in the British Construction Industry

ERIC Educational Resources Information Center

Abdel-Wahab, Mohamed

2012-01-01

The British government continued intervention to support apprenticeship training across the economy has been notable in recent years. The construction industry is the only sector to retain a levy/grant scheme (that supports training including apprenticeships) since 1964, yet it still faces the problem of skills shortages. This article thus reviews…

Preliminary evaluation of AERMOD using site specific stack and ambient sampling data

USDA-ARS?s Scientific Manuscript database

A cotton ginning industry-supported project was initiated in 2008 to develop a robust particulate matter (PM) dispersion modeling dataset that could be used for evaluating current and future PM dispersion models. This paper compares total PM data collected by the industry-supported study at one gin ...

Financial Incentives for Business-Education Partnerships. A VES Briefing Paper.

ERIC Educational Resources Information Center

Swift, Clint; And Others

Business and industry support education in their communities in many ways, and financial gifts are only one of them. Business, industry, labor, government, and foundations are involved in financial support through grants, fellowships, scholarships, awards, endowments, loans, donations of time and services, and donation of teaching aids, materials,…

Type 1 Diabetes TrialNet: A Multifaceted Approach to Bringing Disease-Modifying Therapy to Clinical Use in Type 1 Diabetes.

PubMed

Bingley, Polly J; Wherrett, Diane K; Shultz, Ann; Rafkin, Lisa E; Atkinson, Mark A; Greenbaum, Carla J

2018-04-01

What will it take to bring disease-modifying therapy to clinical use in type 1 diabetes? Coordinated efforts of investigators involved in discovery, translational, and clinical research operating in partnership with funders and industry and in sync with regulatory agencies are needed. This Perspective describes one such effort, Type 1 Diabetes TrialNet, a National Institutes of Health-funded and JDRF-supported international clinical trials network that emerged from the Diabetes Prevention Trial-Type 1 (DPT-1). Through longitudinal natural history studies, as well as trials before and after clinical onset of disease combined with mechanistic and ancillary investigations to enhance scientific understanding and translation to clinical use, TrialNet is working to bring disease-modifying therapies to individuals with type 1 diabetes. Moreover, TrialNet uses its expertise and experience in clinical studies to increase efficiencies in the conduct of trials and to reduce the burden of participation on individuals and families. Herein, we highlight key contributions made by TrialNet toward a revised understanding of the natural history of disease and approaches to alter disease course and outline the consortium's plans for the future. © 2018 by the American Diabetes Association.

Guidelines, editors, pharma and the biological paradigm shift.

PubMed

Singh, Ajai R; Singh, Shakuntala A

2007-01-01

Private investment in biomedical research has increased over the last few decades. At most places it has been welcomed as the next best thing to technology itself. Much of the intellectual talent from academic institutions is getting absorbed in lucrative positions in industry. Applied research finds willing collaborators in venture capital funded industry, so a symbiotic growth is ensured for both.There are significant costs involved too. As academia interacts with industry, major areas of conflict of interest especially applicable to biomedical research have arisen. They are related to disputes over patents and royalty, hostile encounters between academia and industry, as also between public and private enterprise, legal tangles, research misconduct of various types, antagonistic press and patient-advocate lobbies and a general atmosphere in which commercial interest get precedence over patient welfare.Pharma image stinks because of a number of errors of omission and commission. A recent example is suppression of negative findings about Bayer's Trasylol (Aprotinin) and the marketing maneuvers of Eli Lilly's Xigris (rhAPC). Whenever there is a conflict between patient vulnerability and profit motives, pharma often tends to tilt towards the latter. Moreover there are documents that bring to light how companies frequently cross the line between patient welfare and profit seeking behaviour.A voluntary moratorium over pharma spending to pamper drug prescribers is necessary. A code of conduct adopted recently by OPPI in India to limit pharma company expenses over junkets and trinkets is a welcome step.Clinical practice guidelines (CPG) are considered important as they guide the diagnostic/therapeutic regimen of a large number of medical professionals and hospitals and provide recommendations on drugs, their dosages and criteria for selection. Along with clinical trials, they are another area of growing influence by the pharmaceutical industry. For example, in a relatively recent survey of 2002, it was found that about 60% of 192 authors of clinical practice guidelines reported they had financial connections with the companies whose drugs were under consideration. There is a strong case for making CPGs based not just on effectivity but cost effectivity. The various ramifications of this need to be spelt out. Work of bodies like the Appraisal of Guidelines Research and Evaluation (AGREE) Collaboration and Guidelines Advisory Committee (GAC) are also worth a close look.Even the actions of Foundations that work for disease amelioration have come under scrutiny. The process of setting up 'Best Practices' Guidelines for interactions between the pharmaceutical industry and clinicians has already begun and can have important consequences for patient care. Similarly, Good Publication Practice (GPP) for pharmaceutical companies have also been set up aimed at improving the behaviour of drug companies while reporting drug trialsThe rapidly increasing trend toward influence and control by industry has become a concern for many. It is of such importance that the Association of American Medical Colleges has issued two relatively new documents - one, in 2001, on how to deal with individual conflicts of interest; and the other, in 2002, on how to deal with institutional conflicts of interest in the conduct of clinical research. Academic Medical Centers (AMCs), as also medical education and research institutions at other places, have to adopt means that minimize their conflicts of interest.Both medical associations and research journal editors are getting concerned with individual and institutional conflicts of interest in the conduct of clinical research and documents are now available which address these issues. The 2001 ICMJE revision calls for full disclosure of the sponsor's role in research, as well as assurance that the investigators are independent of the sponsor, are fully accountable for the design and conduct of the trial, have independent access to all trial data and control all editorial and publication decisions. However the findings of a 2002 study suggest that academic institutions routinely participate in clinical research that does not adhere to ICMJE standards of accountability, access to data and control of publication.There is an inevitable slant to produce not necessarily useful but marketable products which ensure the profitability of industry and research grants outflow to academia. Industry supports new, not traditional, therapies, irrespective of what is effective. Whatever traditional therapy is supported is most probably because the company concerned has a product with a big stake there, which has remained a 'gold standard' or which that player thinks has still some 'juice' left.Industry sponsorship is mainly for potential medications, not for trying to determine whether there may be non-pharmacological interventions that may be equally good, if not better. In the paradigm shift towards biological psychiatry, the role of industry sponsorship is not overt but probably more pervasive than many have realised, or the right thinking may consider good, for the health of the branch in the long run.An issue of major concern is protection of the interests of research subjects. Patients agree to become research subjects not only for personal medical benefit but, as an extension, to benefit the rest of the patient population and also advance medical research.We all accept that industry profits have to be made, and investment in research and development by the pharma industry is massive. However, we must also accept there is a fundamental difference between marketing strategies for other entities and those for drugs.The ultimate barometer is patient welfare and no drug that compromises it can stand the test of time. So, how does it make even commercial sense in the long term to market substandard products? The greatest mistake long-term players in industry may make is try to adopt the shady techniques of the upstart new entrant. Secrecy of marketing/sales tactics, of the process of manufacture, of other strategies and plans of business expansion, of strategies to tackle competition are fine business tactics. But it is critical that secrecy as a tactic not extend to reporting of research findings, especially those contrary to one's product.Pharma has no option but to make a quality product, do comprehensive adverse reaction profiles, and market it only if it passes both tests.Why does pharma adopt questionable tactics? The reasons are essentially two:What with all the constraints, a drug comes to the pharmacy after huge investments. There are crippling overheads and infrastructure costs to be recovered. And there are massive profit margins to be maintained. If these were to be dependent only on genuine drug discoveries, that would be taking too great a risk.Industry players have to strike the right balance between profit making and credibility. In profit making, the marketing champions play their role. In credibility ratings, researchers and paid spokes-persons play their role. All is hunky dory till marketing is based on credibility. When there is nothing available to make for credibility, something is projected as one and marketing carried out, in the calculated hope that profits can accrue, since profit making must continue endlessly. That is what makes pharma adopt even questionable means to make profits.Essentially, there are four types of drugs. First, drugs that work and have minimal side-effects; second, drugs which work but have serious side-effects; third, drugs that do not work and have minimal side-effects; and fourth, drugs which work minimally but have serious side-effects. It is the second and fourth types that create major hassles for industry. Often, industry may try to project the fourth type as the second to escape censure.The major cat and mouse game being played by conscientious researchers is in exposing the third and fourth for what they are and not allowing industry to palm them off as the first and second type respectively. The other major game is in preventing the second type from being projected as the first. The third type are essentially harmless, so they attract censure all right and some merriment at the antics to market them. But they escape anything more than a light rap on the knuckles, except when they are projected as the first type.What is necessary for industry captains and long-term players is to realise:Their major propelling force can only be producing the first type. 2. They accept the second type only till they can lay their hands on the first. 3. The third type can be occasionally played around with to shore up profits, but never by projecting them as the first type. 4. The fourth type are the laggards, real threat to credibility and therefore do not deserve any market hype or promotion.In finding out why most pharma indulges in questionable tactics, we are lead to some interesting solutions to prevent such tactics with the least amount of hassles for all concerned, even as both profits and credibility are kept intact.

Guidelines, Editors, Pharma And The Biological Paradigm Shift

PubMed Central

Singh, Ajai R.; Singh, Shakuntala A.

2007-01-01

Private investment in biomedical research has increased over the last few decades. At most places it has been welcomed as the next best thing to technology itself. Much of the intellectual talent from academic institutions is getting absorbed in lucrative positions in industry. Applied research finds willing collaborators in venture capital funded industry, so a symbiotic growth is ensured for both. There are significant costs involved too. As academia interacts with industry, major areas of conflict of interest especially applicable to biomedical research have arisen. They are related to disputes over patents and royalty, hostile encounters between academia and industry, as also between public and private enterprise, legal tangles, research misconduct of various types, antagonistic press and patient-advocate lobbies and a general atmosphere in which commercial interest get precedence over patient welfare. Pharma image stinks because of a number of errors of omission and commission. A recent example is suppression of negative findings about Bayer's Trasylol (Aprotinin) and the marketing maneuvers of Eli Lilly's Xigris (rhAPC). Whenever there is a conflict between patient vulnerability and profit motives, pharma often tends to tilt towards the latter. Moreover there are documents that bring to light how companies frequently cross the line between patient welfare and profit seeking behaviour. A voluntary moratorium over pharma spending to pamper drug prescribers is necessary. A code of conduct adopted recently by OPPI in India to limit pharma company expenses over junkets and trinkets is a welcome step. Clinical practice guidelines (CPG) are considered important as they guide the diagnostic/therapeutic regimen of a large number of medical professionals and hospitals and provide recommendations on drugs, their dosages and criteria for selection. Along with clinical trials, they are another area of growing influence by the pharmaceutical industry. For example, in a relatively recent survey of 2002, it was found that about 60% of 192 authors of clinical practice guidelines reported they had financial connections with the companies whose drugs were under consideration. There is a strong case for making CPGs based not just on effectivity but cost effectivity. The various ramifications of this need to be spelt out. Work of bodies like the Appraisal of Guidelines Research and Evaluation (AGREE) Collaboration and Guidelines Advisory Committee (GAC) are also worth a close look. Even the actions of Foundations that work for disease amelioration have come under scrutiny. The process of setting up ‘Best Practices’ Guidelines for interactions between the pharmaceutical industry and clinicians has already begun and can have important consequences for patient care. Similarly, Good Publication Practice (GPP) for pharmaceutical companies have also been set up aimed at improving the behaviour of drug companies while reporting drug trials The rapidly increasing trend toward influence and control by industry has become a concern for many. It is of such importance that the Association of American Medical Colleges has issued two relatively new documents - one, in 2001, on how to deal with individual conflicts of interest; and the other, in 2002, on how to deal with institutional conflicts of interest in the conduct of clinical research. Academic Medical Centers (AMCs), as also medical education and research institutions at other places, have to adopt means that minimize their conflicts of interest. Both medical associations and research journal editors are getting concerned with individual and institutional conflicts of interest in the conduct of clinical research and documents are now available which address these issues. The 2001 ICMJE revision calls for full disclosure of the sponsor's role in research, as well as assurance that the investigators are independent of the sponsor, are fully accountable for the design and conduct of the trial, have independent access to all trial data and control all editorial and publication decisions. However the findings of a 2002 study suggest that academic institutions routinely participate in clinical research that does not adhere to ICMJE standards of accountability, access to data and control of publication. There is an inevitable slant to produce not necessarily useful but marketable products which ensure the profitability of industry and research grants outflow to academia. Industry supports new, not traditional, therapies, irrespective of what is effective. Whatever traditional therapy is supported is most probably because the company concerned has a product with a big stake there, which has remained a ‘gold standard’ or which that player thinks has still some ‘juice’ left. Industry sponsorship is mainly for potential medications, not for trying to determine whether there may be non-pharmacological interventions that may be equally good, if not better. In the paradigm shift towards biological psychiatry, the role of industry sponsorship is not overt but probably more pervasive than many have realised, or the right thinking may consider good, for the health of the branch in the long run. An issue of major concern is protection of the interests of research subjects. Patients agree to become research subjects not only for personal medical benefit but, as an extension, to benefit the rest of the patient population and also advance medical research. We all accept that industry profits have to be made, and investment in research and development by the pharma industry is massive. However, we must also accept there is a fundamental difference between marketing strategies for other entities and those for drugs. The ultimate barometer is patient welfare and no drug that compromises it can stand the test of time. So, how does it make even commercial sense in the long term to market substandard products? The greatest mistake long-term players in industry may make is try to adopt the shady techniques of the upstart new entrant. Secrecy of marketing/sales tactics, of the process of manufacture, of other strategies and plans of business expansion, of strategies to tackle competition are fine business tactics. But it is critical that secrecy as a tactic not extend to reporting of research findings, especially those contrary to one's product. Pharma has no option but to make a quality product, do comprehensive adverse reaction profiles, and market it only if it passes both tests. Why does pharma adopt questionable tactics? The reasons are essentially two: What with all the constraints, a drug comes to the pharmacy after huge investments. There are crippling overheads and infrastructure costs to be recovered. And there are massive profit margins to be maintained. If these were to be dependent only on genuine drug discoveries, that would be taking too great a risk. Industry players have to strike the right balance between profit making and credibility. In profit making, the marketing champions play their role. In credibility ratings, researchers and paid spokes-persons play their role. All is hunky dory till marketing is based on credibility. When there is nothing available to make for credibility, something is projected as one and marketing carried out, in the calculated hope that profits can accrue, since profit making must continue endlessly. That is what makes pharma adopt even questionable means to make profits. Essentially, there are four types of drugs. First, drugs that work and have minimal side-effects; second, drugs which work but have serious side-effects; third, drugs that do not work and have minimal side-effects; and fourth, drugs which work minimally but have serious side-effects. It is the second and fourth types that create major hassles for industry. Often, industry may try to project the fourth type as the second to escape censure. The major cat and mouse game being played by conscientious researchers is in exposing the third and fourth for what they are and not allowing industry to palm them off as the first and second type respectively. The other major game is in preventing the second type from being projected as the first. The third type are essentially harmless, so they attract censure all right and some merriment at the antics to market them. But they escape anything more than a light rap on the knuckles, except when they are projected as the first type. What is necessary for industry captains and long-term players is to realise: Their major propelling force can only be producing the first type. 2. They accept the second type only till they can lay their hands on the first. 3. The third type can be occasionally played around with to shore up profits, but never by projecting them as the first type. 4. The fourth type are the laggards, real threat to credibility and therefore do not deserve any market hype or promotion. In finding out why most pharma indulges in questionable tactics, we are lead to some interesting solutions to prevent such tactics with the least amount of hassles for all concerned, even as both profits and credibility are kept intact. PMID:22058616

Rethinking the Think Tanks: How Industry-Funded "Experts" Twist the Environmental Debate.

ERIC Educational Resources Information Center

Moore, Curtis

2002-01-01

Speculates about the role of industry-funded experts in distorting the environmental debate. Uses the records of Koch Industries and numerous other companies as examples to support the argument. (DDR)

Design and implementation for integrated UAV multi-spectral inspection system

NASA Astrophysics Data System (ADS)

Zhu, X.; Li, X.; Yan, F.

2018-04-01

In order to improve the working efficiency of the transmission line inspection and reduce the labour intensity of the inspectors, this paper presents an Unmanned Aerial Vehicle (UAV) inspection system architecture for the transmission line inspection. In this document, the light-duty design for different inspection equipment and processing terminals is completed. It presents the reference design for the information-processing terminal, supporting the inspection and interactive equipment accessing, and obtains all performance indicators of the inspection information processing through the tests. Practical application shows that the UAV inspection system supports access and management of different types of mainstream fault detection equipment, and can implement the independent diagnosis of the detected information to generate inspection reports in line with industry norms, which can meet the fast, timely, and efficient requirements for the power line inspection work.

75 FR 22814 - Guidance for Industry: Nucleic Acid Testing (NAT) for Human Immunodeficiency Virus Type 1 (HIV-1...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-30

... Immunodeficiency Virus Type 1 (HIV-1) and Hepatitis C Virus (HCV): Testing, Product Disposition, and Donor Deferral... Industry: Nucleic Acid Testing (NAT) for Human Immunodeficiency Virus Type 1 (HIV-1) and Hepatitis C Virus... Acid Test (NAT) and Hepatitis C Virus (HCV) NAT, on testing individual samples or pooled samples from...

Scientific Research and Corporate Influence: Smoking, Mental Illness, and the Tobacco Industry

PubMed Central

Hirshbein, Laura

2012-01-01

Mentally ill individuals have always smoked at high rates and continue to do so, despite public health efforts to encourage smoking cessation. In the last half century, the tobacco industry became interested in this connection, and conducted and supported psychiatric and basic science research on the mental health implications of smoking, long before most mental health professionals outside the industry investigated this issue. Initially, representatives of tobacco industry research organizations supported genetics and psychosomatic research to try to disprove findings that smoking causes lung cancer. Tobacco industry research leaders engaged with investigators because of shared priorities and interests in the brain effects of nicotine. By the 1980s, collaborative funding programs and individual company research and development teams engaged in intramural and extramural basic science studies on the neuropharmacology of nicotine. When mental health researchers outside the industry became interested in the issue of the mentally ill and smoking in the mid-1990s, they increasingly explained it in terms of a disease of nicotine addiction. Both the idea that smoking/nicotine does something positive for the mentally ill and the conclusion that it is the result of nicotine dependence have the potential to support corporate agendas (tobacco or pharmaceutical). PMID:21596723

Scientific research and corporate influence: smoking, mental illness, and the tobacco industry.

PubMed

Hirshbein, Laura

2012-07-01

Mentally ill individuals have always smoked at high rates and continue to do so, despite public health efforts to encourage smoking cessation. In the last half century, the tobacco industry became interested in this connection, and conducted and supported psychiatric and basic science research on the mental health implications of smoking, long before most mental health professionals outside the industry investigated this issue. Initially, representatives of tobacco industry research organizations supported genetics and psychosomatic research to try to disprove findings that smoking causes lung cancer. Tobacco industry research leaders engaged with investigators because of shared priorities and interests in the brain effects of nicotine. By the 1980s, collaborative funding programs and individual company research and development teams engaged in intramural and extramural basic science studies on the neuropharmacology of nicotine. When mental health researchers outside the industry became interested in the issue of the mentally ill and smoking in the mid-1990s, they increasingly explained it in terms of a disease of nicotine addiction. Both the idea that smoking/nicotine does something positive for the mentally ill and the conclusion that it is the result of nicotine dependence have the potential to support corporate agendas (tobacco or pharmaceutical).

Computerized structural mechanics for 1990's: Advanced aircraft needs

NASA Technical Reports Server (NTRS)

Viswanathan, A. V.; Backman, B. F.

1989-01-01

The needs for computerized structural mechanics (CSM) as seen from the standpoint of the aircraft industry are discussed. These needs are projected into the 1990's with special focus on the new advanced materials. Preliminary design/analysis, research, and detail design/analysis are identified as major areas. The role of local/global analyses in these different areas is discussed. The lessons learned in the past are used as a basis for the design of a CSM framework that could modify and consolidate existing technology and include future developments in a rational and useful way. A philosophy is stated, and a set of analyses needs driven by the emerging advanced composites is enumerated. The roles of NASA, the universities, and the industry are identified. Finally, a set of rational research targets is recommended based on both the new types of computers and the increased complexity the industry faces. Computerized structural mechanics should be more than new methods in structural mechanics and numerical analyses. It should be a set of engineering applications software products that combines innovations in structural mechanics, numerical analysis, data processing, search and display features, and recent hardware advances and is organized in a framework that directly supports the design process.

ADA Title I allegations and the Mining, Quarrying, and Oil/Gas Extraction industry.

PubMed

Van Wieren, Todd A; Rhoades, Laura; McMahon, Brian T

2017-01-01

The majority of research about employment discrimination in the U.S. Mining, Quarrying, and Oil/Gas (MQOGE) industries has concentrated on gender and race, while little attention has focused on disability. To explore allegations of Americans with Disabilities Act (ADA) Title I discrimination made to the Equal Employment Opportunity Commission (EEOC) by individuals with disabilities against MQOGE employers. Key data available to this study included demographic characteristics of charging parties, size of employers, types of allegations, and case outcomes. Using descriptive analysis, allegation profiles were developed for MQOGE's three main sectors (i.e., Oil/Gas Extraction, Mining except Oil/Gas, and Support Activities). These three profiles where then comparatively analyzed. Lastly, regression analysis explored whether some of the available data could partially predict MQOGE case outcomes. The predominant characteristics of MQOGE allegations were found to be quite similar to the allegation profile of U.S. private-sector industry as a whole, and fairly representative of MQOGE's workforce demographics. Significant differences between MQOGE's three main sector profiles were noted on some important characteristics. Lastly, it was found that MQOGE case outcomes could be partially predicted via some of the available variables. The study's limitations were presented and recommendations were offered for further research.

Galvanic Liquid Applied Coating System For Protection of Embedded Steel Surfaces from Corrosion

NASA Technical Reports Server (NTRS)

Curran, Joseph; Curran, Jerome; Voska, N. (Technical Monitor)

2002-01-01

Corrosion of reinforcing steel in concrete is an insidious problem facing Kennedy Space Center (KSC), other Government Agencies, and the general public. These problems include KSC launch support structures, highway bridge infrastructure, and building structures such as condominium balconies. Due to these problems, the development of a Galvanic Liquid Applied Coating System would be a breakthrough technology having great commercial value for the following industries: Transportation, Infrastructure, Marine Infrastructure, Civil Engineering, and the Construction Industry. This sacrificial coating system consists of a paint matrix that may include metallic components, conducting agents, and moisture attractors. Similar systems have been used in the past with varying degrees of success. These systems have no proven history of effectiveness over the long term. In addition, these types of systems have had limited success overcoming the initial resistance between the concrete/coating interface. The coating developed at KSC incorporates methods proven to overcome the barriers that previous systems could not achieve. Successful development and continued optimization of this breakthrough system would produce great interest in NASA/KSC for corrosion engineering technology and problem solutions. Commercial patents on this technology would enhance KSC's ability to attract industry partners for similar corrosion control applications.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Faidy, C.; Gilles, P.

The objective of the seminar was to present the current state of the art in Leak-Before-Break (LBB) methodology development, validation, and application in an international forum. With particular emphasis on industrial applications and regulatory policies, the seminar provided an opportunity to compare approaches, experiences, and codifications developed by different countries. The seminar was organized into four topic areas: status of LBB applications; technical issues in LBB methodology; complementary requirements (leak detection and inspection); LBB assessment and margins. As a result of this seminar, an improved understanding of LBB gained through sharing of different viewpoints from different countries, permits consideration of:more » simplified pipe support design and possible elimination of loss-of-coolant-accident (LOCA) mechanical consequences for specific cases; defense-in-depth type of applications without support modifications; support of safety cases for plants designed without the LOCA hypothesis. In support of these activities, better estimates of the limits to the LBB approach should follow, as well as an improvement in codifying methodologies. Selected papers are indexed separately for inclusion in the Energy Science and Technology Database.« less

Intelligent Case Based Decision Support System for Online Diagnosis of Automated Production System

NASA Astrophysics Data System (ADS)

Ben Rabah, N.; Saddem, R.; Ben Hmida, F.; Carre-Menetrier, V.; Tagina, M.

2017-01-01

Diagnosis of Automated Production System (APS) is a decision-making process designed to detect, locate and identify a particular failure caused by the control law. In the literature, there are three major types of reasoning for industrial diagnosis: the first is model-based, the second is rule-based and the third is case-based. The common and major limitation of the first and the second reasonings is that they do not have automated learning ability. This paper presents an interactive and effective Case Based Decision Support System for online Diagnosis (CB-DSSD) of an APS. It offers a synergy between the Case Based Reasoning (CBR) and the Decision Support System (DSS) in order to support and assist Human Operator of Supervision (HOS) in his/her decision process. Indeed, the experimental evaluation performed on an Interactive Training System for PLC (ITS PLC) that allows the control of a Programmable Logic Controller (PLC), simulating sensors or/and actuators failures and validating the control algorithm through a real time interactive experience, showed the efficiency of our approach.

How can we improve clinical research in pneumonia?

PubMed

Ramirez, Julio A

2018-05-01

The primary challenges in the field of clinical research include a lack of support within existing infrastructure, insufficient number of clinical research training programs and a paucity of qualified mentors. Most medical centers offer infrastructure support for investigators working with industry sponsors or government-funded clinical trials, yet there are a significant amount of clinical studies performed in the field of pneumonia which are observational studies. For this type of research, which is frequently unfunded, support is usually lacking. In an attempt to optimize clinical research in pneumonia, at the University of Louisville, we developed a clinical research coordinating center (CRCC). The center manages clinical studies in the field of respiratory infections, with the primary focus being pneumonia. Other activities of the CRCC include the organization of an annual clinical research training course for physicians and other healthcare workers, and the facilitation of international research mentoring by a process of connecting new pneumonia investigators with established clinical investigators. To improve clinical research in pneumonia, institutions need to have the appropriate infrastructure in place to support investigators in all aspects of the clinical research process.

Preparing for an "Insured" Old Age: Insurance Purchase and Self-Support in Old Age in Rural China.

PubMed

Shi, Lihong

2018-05-21

This article explores an emerging trend among young and middle-aged rural couples in Northeast China who have purchased recently marketized commercial insurance as a way to prepare for self-support in old age. It discusses how the commercial insurance industry has created a rural elder-care market among a population that traditionally relied on family for support in old age. It also delves into the ways in which the transformations of intergenerational exchange and family structure and a lack of health care access have contributed to the preparation for self-support in old age and have thus fostered the creation of a rural elder-care market for the insurance industry. This emerging trend reveals a transition from traditional family support to a combination of multiple ways of elder care, in particular self-support in old age. It also suggests that while the Chinese state is facing a pressing issue of supporting an increasing aging population and the Chinese family is coping with the burden of elder care, the insurance industry is playing an increasing role in elder care in China.

Non-woven PET fabric reinforced and enhanced the performance of ultrafiltration membranes composed of PVDF blended with PVDF-g-PEGMA for industrial applications

NASA Astrophysics Data System (ADS)

Wang, Shuai; Li, Tong; Chen, Chen; Chen, Sheng; Liu, Baicang; Crittenden, John

2018-03-01

Ultrafiltration (UF) membranes composed of poly(vinylidene fluoride) (PVDF) blended with poly(vinylidene fluoride)-graft-poly(ethylene glycol) methyl ether methacrylate (PVDF-g-PEGMA) can present high flux and excellent foulant removal efficiencies under suitable preparation conditions. However, these PVDF/PVDF-g-PEGMA blended membranes cannot be applied industrially because of the insufficient mechanical strength (strength-to-break value of 8.4 ± 0.6 MPa). We incorporated two types of non-woven polyethylene terephthalate (PET) fabrics (thin hydrophobic and thick hydrophilic fabrics) as support layers to improve the mechanical properties of the blended membranes. The thin and thick PET fabrics were able to significantly improve the tensile strength to 23.3 ± 3.7 MPa and 30.1 ± 1.4 MPa, respectively. The PET fabrics had a limited impact on the separation-related membrane performance such as hydrophilicity, foulant rejection, whereas the mechanical strength and pure water flux was improved several folds. The enhanced flux was attributed to the higher surface porosity and wider finger-like voids in the cross-section. The thin PET fabric with larger porosity was able to maintain a consistent toughness simultaneously; thus it is recommended as a support material for this blended membrane.

It Security and EO Systems

NASA Astrophysics Data System (ADS)

Burnett, M.

2010-12-01

One topic that is beginning to influence the systems that support these goals is that of Information Technology (IT) Security. Unsecure systems are vulnerable to increasing attacks and other negative consequences; sponsoring agencies are correspondingly responding with more refined policies and more stringent security requirements. These affect how EO systems can meet the goals of data and service interoperability and harmonization through open access, transformation and visualization services. Contemporary systems, including the vision of a system-of-systems (such as GEOSS, the Global Earth Observation System of Systems), utilize technologies that support a distributed, global, net-centric environment. These types of systems have a high reliance on the open systems, web services, shared infrastructure and data standards. The broader IT industry has developed and used these technologies in their business and mission critical systems for many years. Unfortunately, the IT industry, and their customers have learned the importance of protecting their assets and resources (computing and information) as they have been forced to respond to an ever increasing number and more complex illegitimate “attackers”. This presentation will offer an overview of work done by the CEOS WGISS organization in summarizing security threats, the challenges to responding to them and capturing the current state of the practice within the EO community.

An Analysis of Industrial Technology Curriculum and Its Significance to the Casting Industry.

ERIC Educational Resources Information Center

Hauser, Roger Emmett

The purpose of this study was to determine to what extent industrial technology programs are training technologists in light of the needs of the casting industry. To determine the type of curriculum needed to prepare individuals for entry into the casting industry, and to study industrial technology programs as they relate to metal casting,…

Advances in High Temperature Materials for Additive Manufacturing

NASA Astrophysics Data System (ADS)

Nordin, Nurul Amira Binti; Johar, Muhammad Akmal Bin; Ibrahim, Mohd Halim Irwan Bin; Marwah, Omar Mohd Faizan bin

2017-08-01

In today’s technology, additive manufacturing has evolved over the year that commonly known as 3D printing. Currently, additive manufacturing have been applied for many industries such as for automotive, aerospace, medical and other commercial product. The technologies are supported by materials for the manufacturing process to produce high quality product. Plus, additive manufacturing technologies has been growth from the lowest to moderate and high technology to fulfil manufacturing industries obligation. Initially from simple 3D printing such as fused deposition modelling (FDM), poly-jet, inkjet printing, to selective laser sintering (SLS), and electron beam melting (EBM). However, the high technology of additive manufacturing nowadays really needs high investment to carry out the process for fine products. There are three foremost type of material which is polymer, metal and ceramic used for additive manufacturing application, and mostly they were in the form of wire feedstock or powder. In circumstance, it is crucial to recognize the characteristics of each type of materials used in order to understand the behaviours of the materials on high temperature application via additive manufacturing. Therefore, this review aims to provide excessive inquiry and gather the necessary information for further research on additive material materials for high temperature application. This paper also proposed a new material based on powder glass, which comes from recycled tempered glass from automotive industry, having a huge potential to be applied for high temperature application. The technique proposed for additive manufacturing will minimize some cost of modelling with same quality of products compare to the others advanced technology used for high temperature application.

Do financial factors such as author page charges and industry funding impact on the nature of published research in infectious diseases?

PubMed

Liyanage, Surabhi S; Raina Macintyre, C

2006-09-01

The question of who pays for research to be conducted and published is an important one as it may result in publication bias. The traditional model of medical publishing has relied on subscriptions for funding. There has been increasing interest in making the results of scientific research freely available. One proposed mechanism is an author-pays system, which shifts cost from subscribers to authors. We investigated the impact of author page charges on the nature and type of published research, and the association of industry funding with types of published research. Four infectious diseases journals with comparable scope were studied-two with page charges and two without. Variables included type of research study, area of research, author demographics, study setting and industry funding. The differences between a subscription model vs. a mixed model (author page charges and subscription charges) were studied. We also investigated changes within the same journal once it had moved from a subscription model to a mixed model. Authors from developing countries were significantly less likely to be published in the mixed-model journals (OR 0.25, 95% CI 0.15-0.41, P < 0.001). Clinical trials published in any type of journal were significantly more likely to be industry funded than any other type of research (OR 12.7, 95% CI 7.0-22.9, P < 0.001). Industry-funded research was significantly less likely to be about diseases affecting predominantly the developing world (OR 0.47, 95% CI 0.25-0.89, P < 0.05). There is clearly a relationship between industry funding and certain types of published research. The model of funding of journal publishing can also affect the nature of published research. Shifting publishing costs to authors favours well-funded organizations, industry sponsored research and wealthy countries. Such potential for publication bias must be considered when planning for open access models.

Fostering collaborative research for rare genetic disease: the example of niemann-pick type C disease.

PubMed

Walkley, Steven U; Davidson, Cristin D; Jacoby, Jonathan; Marella, Philip D; Ottinger, Elizabeth A; Austin, Christopher P; Porter, Forbes D; Vite, Charles H; Ory, Daniel S

2016-12-01

Rare disease represents one of the most significant issues facing the medical community and health care providers worldwide, yet the majority of these disorders never emerge from their obscurity, drawing little attention from the medical community or the pharmaceutical industry. The challenge therefore is how best to mobilize rare disease stakeholders to enhance basic, translational and clinical research to advance understanding of pathogenesis and accelerate therapy development. Here we describe a rare, fatal brain disorder known as Niemann-Pick type C (NPC) and an innovative research collaborative known as Support of Accelerated Research for NPC (SOAR-NPC) which illustrates one pathway through which knowledge of a rare disease and its possible treatments are being successfully advanced. Use of the "SOAR" mechanism, we believe, offers a blueprint for similar advancement for many other rare disorders.

Development of Asset Fault Signatures for Prognostic and Health Management in the Nuclear Industry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vivek Agarwal; Nancy J. Lybeck; Randall Bickford

2014-06-01

Proactive online monitoring in the nuclear industry is being explored using the Electric Power Research Institute’s Fleet-Wide Prognostic and Health Management (FW-PHM) Suite software. The FW-PHM Suite is a set of web-based diagnostic and prognostic tools and databases that serves as an integrated health monitoring architecture. The FW-PHM Suite has four main modules: Diagnostic Advisor, Asset Fault Signature (AFS) Database, Remaining Useful Life Advisor, and Remaining Useful Life Database. This paper focuses on development of asset fault signatures to assess the health status of generator step-up generators and emergency diesel generators in nuclear power plants. Asset fault signatures describe themore » distinctive features based on technical examinations that can be used to detect a specific fault type. At the most basic level, fault signatures are comprised of an asset type, a fault type, and a set of one or more fault features (symptoms) that are indicative of the specified fault. The AFS Database is populated with asset fault signatures via a content development exercise that is based on the results of intensive technical research and on the knowledge and experience of technical experts. The developed fault signatures capture this knowledge and implement it in a standardized approach, thereby streamlining the diagnostic and prognostic process. This will support the automation of proactive online monitoring techniques in nuclear power plants to diagnose incipient faults, perform proactive maintenance, and estimate the remaining useful life of assets.« less

Trends, Frequency, and Nature of Surgeon-Reported Conflicts of Interest in Plastic Surgery.

PubMed

Lopez, Joseph; Musavi, Leila; Quan, Amy; Calotta, Nicholas; Juan, Ilona; Park, Angela; Tufaro, Anthony P; May, James W; Dorafshar, Amir H

2017-10-01

The purpose of this study was to identify types and trends in industry sponsorship of plastic surgery research since the establishment of conflict-of-interest reporting policies in plastic surgery. The authors analyzed the frequency and types of self-reported conflicts of interest in the plastic surgery literature since the adoption of reporting policies in 2007. All original articles that met the authors' inclusion criteria and were published in the following three journals from 2008 to 2013 were included: Annals of Plastic Surgery, Plastic and Reconstructive Surgery, and Journal of Plastic, Reconstructive & Aesthetic Surgery. A multivariate regression analysis was performed to determine what study-specific variables were associated with conflict-of-interest disclosures. A total of 3722 articles were analyzed. The incidence of conflicts of interest increased from 14 percent in 2008 to 24 percent in 2009. However, thereafter, the incidence of conflicts of interest decreased steadily from 21 percent in 2010 to 9 percent in 2013. Furthermore, the authors' analysis revealed that from 2008 to 2013, industry decreased direct research support but steadily increased the rate of consultantships (p < 0.001). A multivariate regression analysis revealed that, after adjusting for potential confounders, self-reported conflicts of interest have decreased since 2008 (p = 0.03) and the prevalence of conflicts of interest differs by plastic surgery subspecialty (p < 0.0001), country of origin (p < 0.0001), and journal of publication (p = 0.05). If self-reporting of conflicts of interest is assumed to be accurate, the number of surgeon-reported conflicts of interest in plastic surgery declined overall. Although the absolute number of consultantships did not change, the rate of consultantships rather than direct research support increased over this period.

Technical support document: Energy conservation standards for consumer products: Dishwashers, clothes washers, and clothes dryers including: Environmental impacts; regulatory impact analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1990-12-01

The Energy Policy and Conservation Act as amended (P.L. 94-163), establishes energy conservation standards for 12 of the 13 types of consumer products specifically covered by the Act. The legislation requires the Department of Energy (DOE) to consider new or amended standards for these and other types of products at specified times. This Technical Support Document presents the methodology, data and results from the analysis of the energy and economic impacts of standards on dishwashers, clothes washers, and clothes dryers. The economic impact analysis is performed in five major areas: An Engineering Analysis, which establishes technical feasibility and product attributesmore » including costs of design options to improve appliance efficiency. A Consumer Analysis at two levels: national aggregate impacts, and impacts on individuals. The national aggregate impacts include forecasts of appliance sales, efficiencies, energy use, and consumer expenditures. The individual impacts are analyzed by Life-Cycle Cost (LCC), Payback Periods, and Cost of Conserved Energy (CCE), which evaluate the savings in operating expenses relative to increases in purchase price; A Manufacturer Analysis, which provides an estimate of manufacturers' response to the proposed standards. Their response is quantified by changes in several measures of financial performance for a firm. An Industry Impact Analysis shows financial and competitive impacts on the appliance industry. A Utility Analysis that measures the impacts of the altered energy-consumption patterns on electric utilities. A Environmental Effects analysis, which estimates changes in emissions of carbon dioxide, sulfur oxides, and nitrogen oxides, due to reduced energy consumption in the home and at the power plant. A Regulatory Impact Analysis collects the results of all the analyses into the net benefits and costs from a national perspective. 47 figs., 171 tabs. (JF)« less

Prototype pushing robot for emplacing vitrified waste canisters into horizontal disposal drifts

DOE Office of Scientific and Technical Information (OSTI.GOV)

Londe, L.; Seidler, W.K.; Bosgiraud, J.M.

2007-07-01

Within the French Underground Disposal concept, as described in ANDRA's (Agence Nationale pour la Gestion des Dechets Radioactifs) Dossier 2005, the Pushing Robot is an application envisaged for the emplacement (and the potential retrieval) of 'Vitrified waste packages', also called 'C type packages'. ANDRA has developed a Prototype Pushing Robot within the framework of the ESDRED Project (Engineering Studies and Demonstration of Repository Design) which is co-funded by the European Commission as part of the sixth EURATOM Research and Training Framework Programme (FP6) on nuclear energy (2002 - 2006). The Rationale of the Pushing Robot technology comes from various considerations,more » including the need for (1) a simple and robust system, capable of moving (and potentially retrieving) on up to 40 metres (m), a 2 tonne C type package (mounted on ceramic sliding runners) inside the carbon steel sleeve constituting the liner (and rock support) of a horizontal disposal cell, (2) small annular clearances between the package and the liner, (3) compactness of the device to be transferred from surface to underground, jointly with the package, inside a shielding cask, and (4) remote controlled operations for the sake of radioprotection. The initial design, based on gripping supports, has been replaced by a 'technical variant' based on inflatable toric jacks. It was then possible, using a test bench, to check that the Pushing Robot worked properly. Steps as high as 7 mm were successfully cleared by a dummy package pushed by the Prototype.. Based on the lessons learned by ANDRA's regarding the Prototype Pushing Robot, a new Scope of Work is being written for the Contract concerning an Industrial Scale Demonstrator. The Industrial Scale Demonstration should be completed by the end of the second Quarter of 2008. (authors)« less

Getting libraries involved in industry-university-government collaboration : Libraries should support inauguration of business and lead SME into a knowledge-based society : What Toshiaki Takeuchi does as Business Library Association's President

NASA Astrophysics Data System (ADS)

Morita, Utako

Getting libraries involved in industry-university-government collaboration : Libraries should support inauguration of business and lead SME into a knowledge-based society : What Toshiaki Takeuchi does as Business Library Association's President

CRADA opportunities in pressurized combustion research

DOE Office of Scientific and Technical Information (OSTI.GOV)

Maloney, D J; Norton, T S; Casleton, K H

1995-06-01

The Morgantown Energy Technology Center recently began operation of a Low Emissions Combustor Test and Research (LECTR) Facility. This facility was built to support the development of Advanced Gas Turbine Systems (ATS) by providing test facilities and engineering support to METC customers through the ATS University-Industry Consortium and through CRADA participation with industrial partners.

77 FR 7586 - Draft Guidance for Industry on Bioequivalence Recommendation for Nitroglycerin Metered Spray...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-13

... though we have not requested comparative in vitro studies, in vitro studies outlined in the 2002 guidance.... The recommendations provide specific guidance on the design of bioequivalence (BE) studies to support... draft guidance for industry on the Agency's recommendations for BE studies to support ANDAs for...

Condom use as situated in a risk context: women's experiences in the massage parlour industry in Vancouver, Canada.

PubMed

Handlovsky, Ingrid; Bungay, Vicky; Kolar, Kat

2012-10-01

Investigation into condom use in sex work has aroused interest in health promotion and illness prevention. Yet there remains a dearth of inquiry into condom use practices in the indoor sex industry, particularly in North America. We performed a thematic analysis of one aspect of the indoor sex work by drawing on data from a larger mixed-methods study that investigated women's health issues in the massage parlour industry in Vancouver, Canada. Using a risk context framework, condom use was approached as a socially situated practice constituted by supportive and constraining dynamics. Three analytic categories were identified: (1) the process of condom negotiation, (2) the availability of condoms and accessibility to information on STI and (3) financial vulnerability. Within these categories, several supportive dynamics (industry experience and personal ingenuity) and constraining dynamics (lack of agency support, client preferences, limited language proficiency and the legal system) were explored as interfacing influences on condom use. Initiatives to encourage condom use must recognise the role of context in order to more effectively support the health-promoting efforts of women in sex work.

Consumers’ Health-Related Motive Orientations and Reactions to Claims about Dietary Calcium

PubMed Central

Hoefkens, Christine; Verbeke, Wim

2013-01-01

Health claims may contribute to better informed and healthier food choices and to improved industrial competitiveness by marketing foods that support healthier lifestyles in line with consumer preferences. With the more stringent European Union regulation of nutrition and health claims, insights into consumers’ health-related goal patterns and their reactions towards such claims are needed to influence the content of lawful claims. This study investigated how consumers’ explicit and implicit health-related motive orientations (HRMOs) together with the type of calcium-claim (nutrition claim, health claim and reduction of disease risk claim) influence perceived credibility and purchasing intention of calcium-enriched fruit juice. Data were collected in April 2006 through a consumer survey with 341 Belgian adults. The findings indicate that stronger implicit HRMOs (i.e., indirect benefits of calcium for personal health) are associated with higher perceived credibility, which is not (yet) translated into a higher purchasing intention. Consumers’ explicit HRMOs, which refer to direct benefits or physiological functions of calcium in the body—as legally permitted in current calcium-claims in the EU—do not associate with reactions to the claims. Independently of consumers’ HRMOs, the claim type significantly affects the perceived credibility and purchasing intention of the product. Implications for nutrition policy makers and food industries are discussed. PMID:23306190

Relations Between the University and Industry.

ERIC Educational Resources Information Center

Sakkab, Nabil Y.

1983-01-01

Two distinct types of research in science and technology are described. One extends existing knowledge by gathering information, and the other requires an intuitive leap from present knowledge. Factors in the university-industry research relationship affecting or affected by the research type are outlined and discussed. (MSE)

Non-robbery-related occupational homicides in the retail industry, 2003-2008.

PubMed

Konda, Srinivas; Tiesman, Hope M; Hendricks, Scott; Gurka, Kelly K

2014-02-01

The purpose of this study was to examine non-robbery-related occupational homicides in the retail industry from 2003 to 2008. Data were abstracted from the Census of Fatal Occupational Injuries. Motive (robbery- or non-robbery-related) and workplace violence (WPV) typology (Type I-IV) were assigned using narrative text fields. Non-robbery-related homicide rates were calculated and compared among WPV types, demographic characteristics, and occupation. Twenty-eight percent of homicides that occurred in the retail industry were non-robbery-related. The leading event associated with non-robbery-related homicides was Type II (perpetrated by customers) (34%), followed by Type IV (perpetrated by personal relationship) (31%). The majority of homicides were due to arguments (50%). Security guards and workers in drinking establishments had the highest homicide rates per 100,000 workers (14.3 and 6.0, respectively). Non-robbery-related homicides comprised a meaningful proportion of workplace homicides in the retail industry. Research is needed to develop strategies to prevent non-robbery-related homicides specifically. © 2013 Wiley Periodicals, Inc.

Non-Robbery-Related Occupational Homicides in the Retail Industry, 2003–2008

PubMed Central

Konda, Srinivas; Tiesman, Hope M.; Hendricks, Scott; Gurka, Kelly K.

2015-01-01

Background The purpose of this study was to examine non-robbery-related occupational homicides in the retail industry from 2003 to 2008. Methods Data were abstracted from the Census of Fatal Occupational Injuries. Motive (robbery- or non-robbery-related) and workplace violence (WPV) typology (Type I–IV) were assigned using narrative text fields. Non-robbery-related homicide rates were calculated and compared among WPV types, demographic characteristics, and occupation. Results Twenty-eight percent of homicides that occurred in the retail industry were non-robbery-related. The leading event associated with non-robbery-related homicides was Type II (perpetrated by customers) (34%), followed by Type IV (perpetrated by personal relationship) (31%). The majority of homicides were due to arguments (50%). Security guards and workers in drinking establishments had the highest homicide rates per 100,000 workers (14.3 and 6.0, respectively). Conclusions Non-robbery-related homicides comprised a meaningful proportion of workplace homicides in the retail industry. Research is needed to develop strategies Periodicals, Inc. PMID:24248892

Microscale Particulate Classifiers (MiPAC) Being Developed

NASA Technical Reports Server (NTRS)

Greenberg, Paul S.

2001-01-01

The NASA Glenn Research Center is developing microscale sensors to characterize atmospheric-borne particulates. The devices are fabricated using MEMS (microelectromechanical systems) technologies. These technologies are derived from those originally developed in support of the semiconductor processing industry. The resulting microsensors can characterize a wide range of particles and are, therefore, suitable to a broad range of applications. This project is supported under a collaborative program called the Glennan Microsystems Initiative. The initiative comprises members of NASA Glenn Research Center, various university affiliates from the State of Ohio, and a number of participating industrial partners. Funding is jointly provided by NASA, the State of Ohio, and industrial members. The work described here is a collaborative arrangement between researchers at Glenn, the University of Minnesota, The National Institute of Standards and Technology (NIST), and the Cleveland State University. Actual device fabrication is conducted at Glenn and at the laboratories of Case Western Reserve University. Case Western is also located in Cleveland, Ohio, and is a participating member of the initiative. The principal investigator for this project is Paul S. Greenberg of Glenn. Two basic types of devices are being developed, and target different ranges of particle sizes. The first class of devices, which is used to measure nanoparticles (i.e., particles in the range of 0.002 to 1 mm), is based on the technique of Electrical Mobility Classification. This technique also affords the valuable ability of measuring the electrical charge state of the particles. Such information is important in the understanding of agglomeration mechanisms and is useful in the development of methods for particle repulsion. The second type of device being developed, which utilizes optical scattering, is suitable for particles larger than 1 mm. This technique also provides information on particle shape and composition. Applications for these sensors include fundamental planetary climatology, monitoring and filtration in spacecraft, human habitation modules and related systems, characterization of particulate emissions from propulsion and power systems, and as early warning sensors for both space-based and ter-restrial fire detection. These devices are also suitable for characterizing biological compounds such as allergens, infectious agents, and biotoxic agents.

Factors affecting RFID adoption in the agricultural product distribution industry: empirical evidence from China.

PubMed

Shi, Ping; Yan, Bo

2016-01-01

We conducted an exploratory investigation of factors influencing the adoption of radio frequency identification (RFID) methods in the agricultural product distribution industry. Through a literature review and field research, and based on the technology-organization-environment (TOE) theoretical framework, this paper analyzes factors influencing RFID adoption in the agricultural product distribution industry in reference to three contexts: technological, organizational, and environmental contexts. An empirical analysis of the TOE framework was conducted by applying structural equation modeling based on actual data from a questionnaire survey on the agricultural product distribution industry in China. The results show that employee resistance and uncertainty are not supported by the model. Technological compatibility, perceived effectiveness, organizational size, upper management support, trust between enterprises, technical knowledge, competitive pressure and support from the Chinese government, which are supported by the model, have significantly positive effects on RFID adoption. Meanwhile, organizational size has the strongest positive effect, while competitive pressure levels have the smallest effect. Technological complexities and costs have significantly negative effects on RFID adoption, with cost being the most significantly negative influencing factor. These research findings will afford enterprises in the agricultural products supply chain with a stronger understanding of the factors that influence RFID adoption in the agricultural product distribution industry. In addition, these findings will help enterprises remain aware of how these factors affect RFID adoption and will thus help enterprises make more accurate and rational decisions by promoting RFID application in the agricultural product distribution industry.

75 FR 13209 - Proposed Information Collection (Technical Industry Standards) Activity: Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-18

... (Technical Industry Standards) Activity: Comment Request AGENCY: Office of Acquisition and Logistics... Industry Standards. OMB Control Number: 2900-0586. Type of Review: Extension of a currently approved collection. Abstract: VAAR provision 852.211-75, Technical Industry Standards, requires items offered for...

African swine fever virus serotype-specific proteins are significant protective antigens for African swine fever.

PubMed

Burmakina, G; Malogolovkin, A; Tulman, E R; Zsak, L; Delhon, G; Diel, D G; Shobogorov, N M; Morgunov, Yu P; Morgunov, S Yu; Kutish, G F; Kolbasov, D; Rock, D L

2016-07-01

African swine fever (ASF) is an emerging disease threat for the swine industry worldwide. No ASF vaccine is available and progress is hindered by lack of knowledge concerning the extent of ASFV strain diversity and the viral antigens conferring type-specific protective immunity in pigs. Available data from vaccination/challenge experiments in pigs indicate that ASF protective immunity may be haemadsorption inhibition (HAI) serotype-specific. Recently, we have shown that two ASFV proteins, CD2v (EP402R) and C-type lectin (EP153R), are necessary and sufficient for mediating HAI serological specificity (Malogolovkin et al., 2015).. Here, using ASFV inter-serotypic chimeric viruses and vaccination/challenge experiments in pigs, we demonstrate that serotype-specific CD2v and/or C-type lectin proteins are important for protection against homologous ASFV infection. Thus, these viral proteins represent significant protective antigens for ASFV that should be targeted in future vaccine design and development. Additionally, these data support the concept of HAI serotype-specific protective immunity.

Overview of the SAE G-11 RMSL (Reliability, Maintainability, Supportability, and Logistics) Division Activities and Technical Projects

NASA Technical Reports Server (NTRS)

Singhal, Surendra N.

2003-01-01

The SAE G-11 RMSL (Reliability, Maintainability, Supportability, and Logistics) Division activities include identification and fulfillment of joint industry, government, and academia needs for development and implementation of RMSL technologies. Four Projects in the Probabilistic Methods area and two in the area of RMSL have been identified. These are: (1) Evaluation of Probabilistic Technology - progress has been made toward the selection of probabilistic application cases. Future effort will focus on assessment of multiple probabilistic softwares in solving selected engineering problems using probabilistic methods. Relevance to Industry & Government - Case studies of typical problems encountering uncertainties, results of solutions to these problems run by different codes, and recommendations on which code is applicable for what problems; (2) Probabilistic Input Preparation - progress has been made in identifying problem cases such as those with no data, little data and sufficient data. Future effort will focus on developing guidelines for preparing input for probabilistic analysis, especially with no or little data. Relevance to Industry & Government - Too often, we get bogged down thinking we need a lot of data before we can quantify uncertainties. Not True. There are ways to do credible probabilistic analysis with little data; (3) Probabilistic Reliability - probabilistic reliability literature search has been completed along with what differentiates it from statistical reliability. Work on computation of reliability based on quantification of uncertainties in primitive variables is in progress. Relevance to Industry & Government - Correct reliability computations both at the component and system level are needed so one can design an item based on its expected usage and life span; (4) Real World Applications of Probabilistic Methods (PM) - A draft of volume 1 comprising aerospace applications has been released. Volume 2, a compilation of real world applications of probabilistic methods with essential information demonstrating application type and timehost savings by the use of probabilistic methods for generic applications is in progress. Relevance to Industry & Government - Too often, we say, 'The Proof is in the Pudding'. With help from many contributors, we hope to produce such a document. Problem is - not too many people are coming forward due to proprietary nature. So, we are asking to document only minimum information including problem description, what method used, did it result in any savings, and how much?; (5) Software Reliability - software reliability concept, program, implementation, guidelines, and standards are being documented. Relevance to Industry & Government - software reliability is a complex issue that must be understood & addressed in all facets of business in industry, government, and other institutions. We address issues, concepts, ways to implement solutions, and guidelines for maximizing software reliability; (6) Maintainability Standards - maintainability/serviceability industry standard/guidelines and industry best practices and methodologies used in performing maintainability/ serviceability tasks are being documented. Relevance to Industry & Government - Any industry or government process, project, and/or tool must be maintained and serviced to realize the life and performance it was designed for. We address issues and develop guidelines for optimum performance & life.

Approaches to Enable Demand Response by Industrial Loads for Ancillary Services Provision

NASA Astrophysics Data System (ADS)

Zhang, Xiao

Demand response has gained significant attention in recent years as it demonstrates potentials to enhance the power system's operational flexibility in a cost-effective way. Industrial loads such as aluminum smelters, steel manufacturers, and cement plants demonstrate advantages in supporting power system operation through demand response programs, because of their intensive power consumption, already existing advanced monitoring and control infrastructure, and the strong economic incentive due to the high energy costs. In this thesis, we study approaches to efficiently integrate each of these types of manufacturing processes as demand response resources. The aluminum smelting process is able to change its power consumption both accurately and quickly by controlling the pots' DC voltage, without affecting the production quality. Hence, an aluminum smelter has both the motivation and the ability to participate in demand response. First, we focus on determining the optimal regulation capacity that such a manufacturing plant should provide. Next, we focus on determining its optimal bidding strategy in the day-ahead energy and ancillary services markets. Electric arc furnaces (EAFs) in steel manufacturing consume a large amount of electric energy. However, a steel plant can take advantage of time-based electricity prices by optimally arranging energy-consuming activities to avoid peak hours. We first propose scheduling methods that incorporate the EAFs' flexibilities to reduce the electricity cost. We then propose methods to make the computations more tractable. Finally, we extend the scheduling formulations to enable the provision of spinning reserve. Cement plants are able to quickly adjust their power consumption rate by switching on/off the crushers. However, switching on/off the loading units only achieves discrete power changes, which restricts the load from offering valuable ancillary services such as regulation and load following, as continuous power changes are required for these services. We propose methods that enable these services with the support of an on-site energy storage device. As demonstrated by the case studies, the proposed approaches are effective and can generate practical production instructions for the industrial loads. This thesis not only provides methods to enable demand response by industrial loads but also potentially encourages industrial loads to be active in electricity markets.

Assessing homeland chemical hazards outside the military gates: industrial hazard threat assessments for department of defense installations.

PubMed

Kirkpatrick, Jeffrey S; Howard, Jacqueline M; Reed, David A

2002-04-08

As part of comprehensive joint medical surveillance measures outlined by the Department of Defense, the US Army Center for Health Promotion and Preventive Medicine (USACHPPM) is beginning to assess environmental health threats to continental US military installations. A common theme in comprehensive joint medical surveillance, in support of Force Health Protection, is the identification and assessment of potential environmental health hazards, and the evaluation and documentation of actual exposures in both a continental US and outside a continental US setting. For the continental US assessments, the USACHPPM has utilized the US Environmental Protection Agency (EPA) database for risk management plans in accordance with Public Law 106-40, and the toxic release inventory database, in a state-of the art geographic information systems based program, termed the Consequence Assessment and Management Tool Set, or CATS, for assessing homeland industrial chemical hazards outside the military gates. As an example, the US EPA toxic release inventory and risk management plans databases are queried to determine the types and locations of industries surrounding a continental US military installation. Contaminants of concern are then ranked with respect to known toxicological and physical hazards, where they are then subject to applicable downwind hazard simulations using applicable meteorological and climatological data sets. The composite downwind hazard areas are mapped in relation to emergency response planning guidelines (ERPG), which were developed by the American Industrial Hygiene Association to assist emergency response personnel planning for catastrophic chemical releases. In addition, other geographic referenced data such as transportation routes, satellite imagery and population data are included in the operational, equipment, and morale risk assessment and management process. These techniques have been developed to assist military medical planners and operations personnel in determining the industrial hazards, vulnerability assessments and health risk assessments to continental United States military installations. These techniques and procedures support the Department of Defense Force Protection measures, which provides awareness of a terrorism threat, appropriate measures to prevent terrorist attacks and mitigate terrorism's effects in the event that preventive measures are ineffective.

Libraries and Industry; Background Study for Use by the National Advisory Commission on Libraries.

ERIC Educational Resources Information Center

North, J.; And Others

The objective of this study was to analyze all operating factors in the relationship between libraries and industry. An investigation was made of situations which affect either library service to industry or industry service to libraries. Examined were the relationship between all types of libraries and the publishing industry, between libraries…

Industry-Based Bilingual Vocational Training. A Directory of Industry-Based Training Programs for LEP Adults.

ERIC Educational Resources Information Center

Thomas, Robert J.; Rhodes, Paula

The purposes of this directory of existing industry-based training programs--for limited English-proficient (LEP) adults employed in those industries--are as follows: (1) to provide a sense of the types of existing industry-based programs available to LEP employees; (2) to identify programs with the potential of implementing bilingual vocational…

40 CFR Table Tt-1 to Subpart Tt of... - Default DOC and Decay Rate Values for Industrial Waste Landfills

Code of Federal Regulations, 2013 CFR

2013-07-01

... Industrial Waste Landfills TT Table TT-1 to Subpart TT of Part 98 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) MANDATORY GREENHOUSE GAS REPORTING Industrial Waste... for Industrial Waste Landfills Industry/Waste Type DOC(weight fraction, wet basis) k[dry climatea] (yr...

40 CFR Table Tt-1 to Subpart Tt of... - Default DOC and Decay Rate Values for Industrial Waste Landfills

Code of Federal Regulations, 2014 CFR

2014-07-01

... Industrial Waste Landfills TT Table TT-1 to Subpart TT of Part 98 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) MANDATORY GREENHOUSE GAS REPORTING Industrial Waste... for Industrial Waste Landfills Industry/Waste Type DOC(weight fraction, wet basis) k[dry climatea] (yr...

5 CFR 532.309 - Determining adequacy of specialized private industry.

Code of Federal Regulations, 2010 CFR

2010-01-01

... private industry. 532.309 Section 532.309 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT CIVIL SERVICE REGULATIONS PREVAILING RATE SYSTEMS Determining Rates for Principal Types of Positions § 532.309... fund wage employees in occupations which comprise the principal types of appropriated positions in the...

Implementing shared governance in a patient care support industry: information technology leading the way.

PubMed

Hartley, Lou Ann

2014-06-01

Implementing technology in the clinical setting is not a project but rather a journey in transforming care delivery. As nursing leaders in healthcare and patient care support organizations embrace technology to drive reforms in quality and efficiency, growing opportunities exist to share experiences between these industries. This department submission describes the journey to nursing shared governance from the perspective of an information technology-based company realizing the goal of supporting patient care.

16 CFR 18.0 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Practices FEDERAL TRADE COMMISSION GUIDES AND TRADE PRACTICE RULES GUIDES FOR THE NURSERY INDUSTRY § 18.0 Definitions. Industry products. As used in this part, the term industry products includes all types of trees... greenhouse plants solely for inside culture or use and annual vegetable plants. Industry members. Any person...

16 CFR 18.0 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Practices FEDERAL TRADE COMMISSION GUIDES AND TRADE PRACTICE RULES GUIDES FOR THE NURSERY INDUSTRY § 18.0 Definitions. Industry products. As used in this part, the term industry products includes all types of trees... greenhouse plants solely for inside culture or use and annual vegetable plants. Industry members. Any person...

75 FR 28857 - Agency Information Collection (Technical Industry Standards) Activities Under OMB Review

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-24

... (Technical Industry Standards) Activities Under OMB Review AGENCY: Office of Acquisition and Logistics... Industry Standards. OMB Control Number: 2900-0586. Type of Review: Extension of a currently approved collection. Abstract: VAAR provision 852.211-75, Technical Industry Standards, requires that items offered...

1991 NASA Life Support Systems Analysis workshop

NASA Technical Reports Server (NTRS)

Evanich, Peggy L.; Crabb, Thomas M.; Gartrell, Charles F.

1992-01-01

The 1991 Life Support Systems Analysis Workshop was sponsored by NASA Headquarters' Office of Aeronautics and Space Technology (OAST) to foster communication among NASA, industrial, and academic specialists, and to integrate their inputs and disseminate information to them. The overall objective of systems analysis within the Life Support Technology Program of OAST is to identify, guide the development of, and verify designs which will increase the performance of the life support systems on component, subsystem, and system levels for future human space missions. The specific goals of this workshop were to report on the status of systems analysis capabilities, to integrate the chemical processing industry technologies, and to integrate recommendations for future technology developments related to systems analysis for life support systems. The workshop included technical presentations, discussions, and interactive planning, with time allocated for discussion of both technology status and time-phased technology development recommendations. Key personnel from NASA, industry, and academia delivered inputs and presentations on the status and priorities of current and future systems analysis methods and requirements.

The impact of the dimensions of environmental performance on firm performance in travel and tourism industry.

PubMed

Tan, Siow-Hooi; Habibullah, Muzafar Shah; Tan, Siow-Kian; Choon, Shay-Wei

2017-12-01

This study investigates the impact of the aggregate and individual dimensions of environmental performance (EP) on financial performance (FP), based on a dataset covering the travel and tourism industry (airlines, casinos, hotels, and restaurants) across different economic regions over the period 2003-2014. The results reveal that EP positively affects the FP in the hotel industry when aggregate EP is used. When individual dimensions of EP are considered, resource reduction is found to positively (negatively) affect the performance in the hotel (airline) industry, while product innovation positively affects the performance in the restaurant industry. Hence, the trade-off effect seems to be dominant in the airline industry, and the 'heterogeneous resources and reputation-building' hypothesis is evident in both the hotel and restaurant industries. In addition, in general, the findings support the positive moderating effect of slack resources on the relationship between the individual dimensions of EP and FP in the travel and tourism industry, and, hence, are supportive of the slack resources hypothesis. These effects, however, vary depending on the travel and tourism industry under investigation. Copyright © 2017 Elsevier Ltd. All rights reserved.

The Impact of Financial Conflicts of Interest in Plastic Surgery: Are They All Created Equal?

PubMed

Lopez, Joseph; Juan, Ilona; Wu, Adela; Samaha, Georges; Cho, Brian; Luck, J D; Soni, Ashwin; Milton, Jacqueline; May, James W; Tufaro, Anthony P; Dorafshar, Amir H

2016-08-01

Recently, several studies have demonstrated that articles that disclose conflicts of interests (COI) are associated with publication of positive results. The purpose of this study was to learn more about the different types of COI as they relate to the general topic of COI in plastic surgery. Specifically, we aimed to examine whether different types of COI are more likely than others to be associated with the presentation of positive findings. We reviewed all original articles in Annals of Plastic Surgery, Journal of Plastic, Reconstructive, and Aesthetic Surgery, and Plastic & Reconstructive Surgery from January 1, 2012, to December 31, 2013. All scientific articles were analyzed, and several article characteristics were extracted. Disclosed COI were categorized into the following categories: consultant/employee, royalties/stock options, and research support. The findings reported in each article abstract were blindly graded as reporting a positive, negative, neutral, or not applicable result. A multivariable analysis was performed to determine whether an association existed between certain types of COI and publication of positive conclusions. A total of 3124 articles were identified of which 1185 fulfilled the inclusion criteria. Financial COI were reported in 153 studies (12.9%). The most common type of COI was "research support" (7.3%), whereas the least common was "royalties/stock options" (1.2%). Rates of different types of COI varied significantly by plastic surgery subspecialty field (P < 0.001). In the multivariable analysis, authors who disclosed COI related to research support, consultant/employee, and royalties/stock options were 1.31, 6.62, and 8.72 times more likely, respectively, to publish positive findings when compared with authors that disclosed no COI after correcting for potential confounding factors. However, consultancy/employee status was the only COI category statistically associated with publication of positive results (P < 0.001). Self-reported COI are uncommon in plastic surgery research. Our results provide evidence that certain types of financial COI are more likely than others to be associated with the presentation of positive findings. This analysis suggests that certain investigators may be more biased, consciously or unconsciously, by the type of financial benefit offered by industry.

Industry Invests in Research Centers.

ERIC Educational Resources Information Center

Ploch, Margie

1983-01-01

Universities and industry are forging new relationships to support academic research and industrial research and development, including the establishment of university/cooperative research centers. Discusses various cooperative projects at these research centers. Includes a list of representative R&D centers in biotechnology, building…

OAST Space Theme Workshop. Volume 2: Theme summary. 2: Space industrialization (no. 8). A. Theme statement. B. 26 April 1976 presentation. C. Summary statement. D. Initiative action (form 5)

NASA Technical Reports Server (NTRS)

1976-01-01

Enabling technology needs and other requirements to support space industrialization include: large space structures; fabrication and joining processes; single stage to orbit and heavy lift launch vehicles; nuclear and solar space power systems; robotics, manipulators, and teleoperators; biotechnology in space; artificial gravity; the utilization of lunar materials for construction; and the extraction of oxygen and metals from lunar resources. New initiatives (FY 1978) directly supportive or partly related to space industrialization are listed.

How Emerging Technologies are Changing the Rules of Spacecraft Ground Support

NASA Technical Reports Server (NTRS)

Boland, Dillard; Steger, Warren; Weidow, David; Yakstis, Lou

1996-01-01

As part of its effort to develop the flight dynamics distributed system (FDDS), NASA established a program for the continual monitoring of the developments in computer and software technologies, and for assessing the significance of constructing and operating spacecraft ground data systems. In relation to this, technology trends in the computing industry are reviewed, exploring their significance for the spacecraft ground support industry. The technologies considered are: hardware; object computing; Internet; automation, and software development. The ways in which these technologies have affected the industry are considered.

ELPIDA: a general architecture for medical imaging systems supporting telemedicine applications

NASA Astrophysics Data System (ADS)

Lymberopoulos, Dimitris C.; Spiropoulos, Kostas V.; Anastassopoulos, George C.; Kotsopoulos, Stavros A.; Solomou, Katerina G.

1995-01-01

During the next years, profound changes are expected in computer and communication technologies that will offer the medical imaging systems (MIS) industry a challenge to develop advanced telemedicine applications of high performance. Medical industry, vendors, and specialists need to agree on a universal MIS structure that will provide a stack of functions, protocols, and interfaces suitable for coordination and management of high-level image consults, reports, and review activities. Doctors and engineers have worked together to determine the types, targets, and range of such activities within a medical group working domain and to posit their impact on MIS structure. As a result, the fundamental MIS functions have been posed and organized in the form of a general MIS architecture, denoted as ELPIDA. The structure of this architecture was kept as simple as possible to allow its extension to diverse multimode operational schemes handling medical and conversational audiovisual information of different classes. The fundamentals of ELPIDA and pulmonary image diagnostic aspects have been employed for the development of a prototype MIS.

Metals as radio-enhancers in oncology: The industry perspective

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pottier, Agnés, E-mail: agnes.pottier@nanobiotix.com; Borghi, Elsa; Levy, Laurent

Radio-enhancers, metal-based nanosized agents, could play a key role in oncology. They may unlock the potential of radiotherapy by enhancing the radiation dose deposit within tumors when the ionizing radiation source is ‘on’, while exhibiting chemically inert behavior in cellular and subcellular systems when the radiation beam is ‘off’. Important decision points support the development of these new type of therapeutic agents originated from nanotechnology. Here, we discuss from an industry perspective, the interest of developing radio-enhancer agents to improve tumor control, the relevance of nanotechnology to achieve adequate therapeutic attributes, and present some considerations for their development in oncology.more » - Highlights: • Oncology is a field of high unmet medical need. • Despites of its widespread usage, radiation therapy presents a narrow therapeutic window. • High density material at the nanoscale may enhance radiation dose deposit from cancer cells. • Metal-based nanosized radio-enhancers could unlock the potential of radiotherapy.« less

Acute myeloid leukemia risk by industry and occupation.

PubMed

Tsai, Rebecca J; Luckhaupt, Sara E; Schumacher, Pam; Cress, Rosemary D; Deapen, Dennis M; Calvert, Geoffrey M

2014-11-01

Acute myeloid leukemia (AML) is the most common type of leukemia found in adults. Identifying jobs that pose a risk for AML may be useful for identifying new risk factors. A matched case-control analysis was conducted using California Cancer Registry data from 1988 to 2007. This study included 8999 cases of AML and 24 822 controls. Industries with a statistically significant increased AML risk were construction (matched odds ratio [mOR] = 1.13); crop production (mOR = 1.41); support activities for agriculture and forestry (mOR = 2.05); and animal slaughtering and processing (mOR = 2.09). Among occupations with a statistically significant increased AML risk were miscellaneous agricultural workers (mOR = 1.76); fishers and related fishing workers (mOR = 2.02); nursing, psychiatric and home health aides (mOR = 1.65); and janitors and building cleaners (mOR = 1.54). Further investigation is needed to confirm study findings and to identify specific exposures responsible for the increased risks.

Explicitly searching for useful inventions: dynamic relatedness and the costs of connecting versus synthesizing

PubMed Central

2010-01-01

Inventions combine technological features. When features are barely related, burdensomely broad knowledge is required to identify the situations that they share. When features are overly related, burdensomely broad knowledge is required to identify the situations that distinguish them. Thus, according to my first hypothesis, when features are moderately related, the costs of connecting and costs of synthesizing are cumulatively minimized, and the most useful inventions emerge. I also hypothesize that continued experimentation with a specific set of features is likely to lead to the discovery of decreasingly useful inventions; the earlier-identified connections reflect the more common consumer situations. Covering data from all industries, the empirical analysis provides broad support for the first hypothesis. Regressions to test the second hypothesis are inconclusive when examining industry types individually. Yet, this study represents an exploratory investigation, and future research should test refined hypotheses with more sophisticated data, such as that found in literature-based discovery research. PMID:21297855

Acute myeloid leukemia risk by industry and occupation

PubMed Central

Tsai, Rebecca J.; Luckhaupt, Sara E.; Schumacher, Pam; Cress, Rosemary D.; Deapen, Dennis M.; Calvert, Geoffrey M.

2015-01-01

Acute myeloid leukemia (AML) is the most common type of leukemia found in adults. Identifying jobs that pose a risk for AML may be useful for identifying new risk factors. A matched case–control analysis was conducted using California Cancer Registry data from 1988 to 2007. This study included 8999 cases of AML and 24 822 controls. Industries with a statistically significant increased AML risk were construction (matched odds ratio [mOR] = 1.13); crop production (mOR = 1.41); support activities for agriculture and forestry (mOR = 2.05); and animal slaughtering and processing (mOR = 2.09). Among occupations with a statistically significant increased AML risk were miscellaneous agricultural workers (mOR = 1.76); fishers and related fishing workers (mOR = 2.02); nursing, psychiatric and home health aides (mOR = 1.65); and janitors and building cleaners (mOR = 1.54). Further investigation is needed to confirm study findings and to identify specific exposures responsible for the increased risks. PMID:24547710

Academia-industry collaboration in continuing medical education: description of two approaches.

PubMed

Katz, Harvey P; Goldfinger, Stephen E; Fletcher, Suzanne W

2002-01-01

Although concerns have been raised about industry support of continuing medical education (CME), there are few published reports of academia-industry collaboration in the field. We describe and evaluate Pri-Med, a CME experience for primary care clinicians developed jointly by the Harvard Medical School (HMS) and M/C Communications. Since 1995, 19 Pri-Med conferences have been held in four cities, drawing more than 100,000 primary care clinicians. The educational core of each Pri-Med conference is a 3-day Harvard course, "Current Clinical Issues in Primary Care." Course content is determined by a faculty committee independent of any commercial influence. Revenues from multiple industry sources flow through M/C Communications to the medical school as an educational grant to support primary care education. Pri-Med also offers separate pharmaceutical company-funded symposia. Comparing the two educational approaches during four conferences, 221 HMS talks and 103 symposia were presented. The HMS course covered a wide range with 133 topics; the symposia focused on 30 topics, most of which were linked to recently approved new therapeutic products manufactured by the funders. Both the course and the symposia were highly rated by attendees. When CME presentations for primary care physicians receive direct support from industry, the range of offered topics is narrower than when programs are developed independently of such support. There appear to be no differences in the perceived quality of presentations delivered with and without such support. Our experience suggests that a firewall between program planners and providers of financial support will result in a broader array of educational subjects relevant to the field of primary care.

Availability and Use of Workplace Supports for Health Promotion Among Employees of Small and Large Businesses.

PubMed

Dale, Ann Marie; Enke, Chris; Buckner-Petty, Skye; Hipp, James Aaron; Marx, Christine; Strickland, Jaime; Evanoff, Bradley

2018-01-01

To explore the availability and utilization of workplace health supports by employees of small and large-sized employers. Cross-sectional, telephone-based interviews collected on 16 workplace health supports for physical activity and diet. Participants selected by random-digit-dialing from 4 metropolitan areas of Missouri employees from 2012 to 2013. Two thousand fifteen working adults. We explored the availability and use of supports by employer size (<100 employees vs ≥100 employees), accounting for industry and personal factors. We examined distributions and Poisson regression models of availability for supports by employer size and by industry and use of supports by employer size and personal factors. One-fifth of the 1796 employees were employed by small-sized employers. Large employers offered more supports than small (mean: 6 vs 3), but a higher proportion of employees of small-sized employers used supports when available (59% vs 47%). The differences in offered supports between industries were not due to size alone. In regard to the determinants of participation, the personal factors of gender, age, weight, and income were associated with participation in 10 of the supports. Employer size was also associated with participation in 10 supports. No associations were found between personal factors or workplace size and participation for 3 supports. A higher proportion of employees working for smaller businesses use available supports than employees of larger businesses. Supports offered by employers should target the needs and interests of the workforce, particularly for the higher risk low-income employees.

Perception of Aquaculture Education to Support Further Growth of Aquaculture Industry in Victoria, Australia

ERIC Educational Resources Information Center

Awal, Sadiqul; Christie, Andrew; Watson, Matthew; Hannadige, Asanka G. T.

2012-01-01

Purpose: The central aim of this study was to determine the perception of aquaculture educational provisions in the state of Victoria, and whether they are sufficient to ultimately support further growth of the industry. Design/methodology/approach: Questionnaires were formulated and distributed to participants in a variety of ways, including via…

Decision-Making Amplification under Uncertainty: An Exploratory Study of Behavioral Similarity and Intelligent Decision Support Systems

ERIC Educational Resources Information Center

Campbell, Merle Wayne

2013-01-01

Intelligent decision systems have the potential to support and greatly amplify human decision-making across a number of industries and domains. However, despite the rapid improvement in the underlying capabilities of these "intelligent" systems, increasing their acceptance as decision aids in industry has remained a formidable challenge.…

A Project-Based Laboratory for Learning Embedded System Design with Industry Support

ERIC Educational Resources Information Center

Lee, Chyi-Shyong; Su, Juing-Huei; Lin, Kuo-En; Chang, Jia-Hao; Lin, Gu-Hong

2010-01-01

A project-based laboratory for learning embedded system design with support from industry is presented in this paper. The aim of this laboratory is to motivate students to learn the building blocks of embedded systems and practical control algorithms by constructing a line-following robot using the quadratic interpolation technique to predict the…

78 FR 55261 - Draft Guidance for Industry on Generic Drug User Fee Amendments of 2012: Questions and Answers...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-10

... public and reduce costs to industry. GDUFA enables FDA to assess user fees to support critical and... assess user fees to support critical and measurable enhancements to FDA's generic drugs program. GDUFA...). The draft guidance, when finalized, will represent the Agency's current thinking on ``Generic Drug...

Public Policy Implications of the Transition to a Subscription-Based Economic Structure for the Television Industry.

ERIC Educational Resources Information Center

Baldwin, Thomas F.; Wirth, Michael O.

This paper argues that the United States television industry is in a transitional period between the dominance of an advertiser-supported system and an advertiser-subscription system, and that a "dual revenue stream" system of subscription and advertising will eventually relegate the advertiser-only support system to a secondary role.…

An assessment of educational needs in the Alaskan forest products industry.

Treesearch

Jon Thomas; Eric Hansen; Allen M. Brackley

2005-01-01

Major changes in federal forest policy in Alaska have resulted in a dramatic downsizing of the state's forest industry. These changes have driven efforts for economic restructuring and improved support for Alaskan communities. The University of Alaska Sitka Forest Products program at the University of Alaska Southeast is one example of efforts to better support...

An assessment of educational needs in the Alaskan forest products industry

Treesearch

J. Thomas; E. Hansen; A. Brackley

2005-01-01

Major changes in federal forest policy in Alaska have resulted in a dramatic downsizing of the state's forest industry. These changes have driven efforts for economic restructuring and improved support for Alaskan communities. The University of Alaska Sitka Forest Products program at the University of Alaska Southeast is one example of efforts to better support...

The sunshine act and medical publications: Guidance from professional medical associations.

PubMed

Toroser, Dikran; DeTora, Lisa; Cairns, Angela; Juneja, Renu; Georgieva, Anna; Weigel, Al; Pepitone, Kim

2015-01-01

To review guidance from professional medical associations to physicians on the Sunshine Act, with a focus on industry support for medical publications. Using 'Sunshine Act' as a search term, we searched PubMed (dates February 2013 to November 2014) and the 'grey literature' using Google and Google Scholar. Online information was extracted from websites of pre-identified professional medical associations. Some professional medical associations have published peer-reviewed recommendations, position statements or general advice on their websites and in journals around the Sunshine Act. Associations also provided broad online educational resources for physicians. There was universal agreement between peer-reviewed publications, including guidelines, for the need for full transparency and disclosure of industry support. Surveys by some professional associations showed variance in opinion on the forecasted impact of the Sunshine Act on physician-industry relationships. There was scarce information specifically related to reporting requirements for industry-supported medical publications. There is a shortage of information for physicians from professional associations regarding the Sunshine Act and support for medical publications. Due to the lack of clear guidance regarding support for publications, there are presently varying interpretations of the Sunshine Act. The literature debates the potential impact of the Sunshine Act and expresses some concerns that physician-enabled innovation in drug development may be hindered.

Small Bus Manufacturing Industry

DOT National Transportation Integrated Search

1985-01-01

This report is an examination of the small bus manufacturing industry with the objectives of: (1) providing a systematic understanding of the diversity of vehicle types and manufacturers and (2) identifying important economic trends in the industry t...

The Relationship between Psychological Type and Professional Orientation among Technology Education Teachers.

ERIC Educational Resources Information Center

Wicklein, Robert C.; Rojewski, Jay W.

1995-01-01

Of secondary school teachers who completed the Keirsey-Bates Temperament Sorter, 136 were in technology education, 110 in industrial arts. Two types were prevalent among industrial arts teachers: Extrovert Sensing Feeling Judging and Introvert Sensing Feeling Judging. Technology education teachers were more Extrovert Intuitive Thinking Judging,…

77 FR 58323 - Airworthiness Directives; Gulfstream Aerospace LP (Type Certificate Previously Held by Israel...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-20

... Aerospace LP (Type Certificate Previously Held by Israel Aircraft Industries, Ltd.) Airplanes AGENCY... Previously Held by Israel Aircraft Industries, Ltd.) Model Gulfstream G150 airplanes. This proposed AD was.... Discussion The Civil Aviation Authority of Israel (CAAI), which is the aviation authority for Israel, has...

32 CFR 644.520 - Contaminated industrial property.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 32 National Defense 4 2011-07-01 2011-07-01 false Contaminated industrial property. 644.520... Excess Land and Improvements § 644.520 Contaminated industrial property. (a) GSA may arrange to sell contaminated chemical or other industrial plants to a purchaser whose operations will result in the same type...

32 CFR 644.520 - Contaminated industrial property.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 32 National Defense 4 2010-07-01 2010-07-01 true Contaminated industrial property. 644.520 Section... Excess Land and Improvements § 644.520 Contaminated industrial property. (a) GSA may arrange to sell contaminated chemical or other industrial plants to a purchaser whose operations will result in the same type...

5 CFR 532.305 - Dominant industry.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 5 Administrative Personnel 1 2011-01-01 2011-01-01 false Dominant industry. 532.305 Section 532... SYSTEMS Determining Rates for Principal Types of Positions § 532.305 Dominant industry. (a)(1) A specialized industry is a “dominant industry” if the number of wage employees in the wage area who are subject...

5 CFR 532.305 - Dominant industry.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 5 Administrative Personnel 1 2014-01-01 2014-01-01 false Dominant industry. 532.305 Section 532... SYSTEMS Determining Rates for Principal Types of Positions § 532.305 Dominant industry. (a)(1) A specialized industry is a “dominant industry” if the number of wage employees in the wage area who are subject...

5 CFR 532.305 - Dominant industry.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 5 Administrative Personnel 1 2012-01-01 2012-01-01 false Dominant industry. 532.305 Section 532... SYSTEMS Determining Rates for Principal Types of Positions § 532.305 Dominant industry. (a)(1) A specialized industry is a “dominant industry” if the number of wage employees in the wage area who are subject...

5 CFR 532.305 - Dominant industry.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 5 Administrative Personnel 1 2013-01-01 2013-01-01 false Dominant industry. 532.305 Section 532... SYSTEMS Determining Rates for Principal Types of Positions § 532.305 Dominant industry. (a)(1) A specialized industry is a “dominant industry” if the number of wage employees in the wage area who are subject...

5 CFR 532.311 - Survey of specialized private industry related to a dominant industry.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Survey of specialized private industry related to a dominant industry. 532.311 Section 532.311 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT CIVIL SERVICE REGULATIONS PREVAILING RATE SYSTEMS Determining Rates for Principal Types of...

Joint Solar Power Industry and Department of Energy Solar Resource and Meteorological Assessment Project (SOLRMAP)

NASA Astrophysics Data System (ADS)

Wilcox, Steve; Myers, Daryl

2009-08-01

The U.S. Department of Energy's National Renewable Energy Laboratory has embarked on a collaborative effort with the solar industry to establish high quality solar and meteorological measurements. This Solar Resource and Meteorological Assessment Project (SOLRMAP) provides high quality measurements to support deployment of concentrating solar thermal power projects in the United States. The no-funds-exchanged collaboration brings NREL solar resource assessment expertise together with industry needs for measurements. The end result will be high quality data sets to support the financing, design, and monitoring of large scale solar power projects for industry in addition to research-quality data for NREL model development. NREL provides consultation for instrumentation and station deployment, along with instrument calibrations, data acquisition, quality assessment, data distribution, and summary reports. Industry participants provide equipment, infrastructure, and station maintenance.

Engineering Research and Technology Development on the Space Station

NASA Technical Reports Server (NTRS)

1996-01-01

This report identifies and assesses the kinds of engineering research and technology development applicable to national, NASA, and commercial needs that can appropriately be performed on the space station. It also identifies the types of instrumentation that should be included in the space station design to support engineering research. The report contains a preliminary assessment of the potential benefits to U.S. competitiveness of engineering research that might be conducted on a space station, reviews NASA's current approach to jointly funded or cooperative experiments, and suggests modifications that might facilitate university and industry participation in engineering research and technology development activities on the space station.

Violence in the massage parlor industry: experiences of Canadian-born and immigrant women.

PubMed

Bungay, Vicky; Halpin, Michael; Halpin, Peter F; Johnston, Caitlin; Patrick, David M

2012-01-01

We examined and contrasted 129 Canadian-born and immigrant women's experiences of violence and associated structural and interpersonal factors within indoor commercial sex venues. The majority experienced at least one form of structural, interpersonal, or both types of violence, with the attempted removal of a condom during sexual services being cited most frequently. Canadian-born women reported more frequent violent assaults in the survey data. The women's qualitative narratives illustrated that perceptions of violence differed significantly among Canadian versus non-Canadian born women. Findings concerning racialization and gendered relations of power have important implications for prevention and interventions to support victims of abuse.

The Earth Based Ground Stations Element of the Lunar Program

NASA Technical Reports Server (NTRS)

Gal-Edd, Jonathan; Fatig, Curtis; Schier, James; Lee, Charles

2007-01-01

The Lunar Architecture Team (LAT) is responsible for developing a concept for building and supporting a lunar outpost with several exploration capabilities such as rovers, colonization, and observatories. The lunar outpost is planned to be located at the Moon's South Pole. The LAT Communications and Navigation Team (C&N) is responsible for defining the network infrastructure to support the lunar outpost. The following elements are needed to support lunar outpost activities: A Lunar surface network based on industry standard wireless 802.xx protocols, relay satellites positioned 180 degrees apart to provide South Pole coverage for the half of the lunar 28-day orbit that is obscured from Earth view, earth-based ground stations deployed at geographical locations 120 degrees apart. This paper will focus on the Earth ground stations of the lunar architecture. Two types of ground station networks are discussed. One provides Direct to Earth (DTE) support to lunar users using Kaband 23/26Giga-Hertz (GHz) communication frequencies. The second supports the Lunar Relay Satellite (LRS) that will be using Ka-band 40/37GHz (Q-band). This paper will discuss strategies to provide a robust operational network in support of various lunar missions and trades of building new antennas at non-NASA facilities, to improve coverage and provide site diversification for handling rain attenuation.

Industrial Relations and Firm Behavior: Informal Labor Practices in the West Coast Longshore Industry.

ERIC Educational Resources Information Center

Finlay, William

1987-01-01

Considers industrial relations policies and practices of stevedore firms in the West Coast longshore industry in terms of the social worker, worker-resource, and institutional theories. Subsidiary firms were more lenient in contract interpretation and more competitive in recruitment, supporting the worker-resource theory. Includes 2 tables and 33…

Unmanned Ground Systems Roadmap

DTIC Science & Technology

2011-07-01

6 1.3.1 RDECOM, Academia, Industry ..................................................................................... 6 1.3.2 Rapid...for unmanned capabilities can be supported and from which PORs can be facilitated when necessary  The RS JPO formed a Government/ Industry Working...products. 1.3.1 RDECOM, Academia, Industry Given the RS JPO‟s close working relations with academia, industry partners and the RDECOM Labs, the

Educating Tomorrow's Workforce: A Report on the Semiconductor Industry's Commitment to Youth in K-12.

ERIC Educational Resources Information Center

Semiconductor Industry Association, San Jose, CA.

The U.S. semiconductor industry, now the nation's largest manufacturing industry, displays its commitment to training its current workers and educating future workers by supporting educational efforts on the K-12 level. This catalog describes innovative actions by 16 Semiconductor Industry Association companies to improve education at the K-12…

2002 Industry Studies: Information Technology

DTIC Science & Technology

2002-01-01

Government/Industry Dialogue,” http://www.itaa.org/infosec, Online. Internet . 3 March 2002. Information Technology Association of America, “Response... Information Technology ABSTRACT: The information technology (IT) industry represents a vital interest of the United States. The IT industry fuels...2. REPORT TYPE N/A 3. DATES COVERED - 4. TITLE AND SUBTITLE 2002 Industry Studies: Information Technology 5a. CONTRACT NUMBER 5b. GRANT

Pointblank: Acts on the Eve of War, 1938-1939

DTIC Science & Technology

2012-06-01

Russians.52 This horsepower took the form of US concentrated industry supported by a robust transportation network, both of which were critical...ground to a halt and civilians endured hardship. The steel industry shared some of the same robustness as the oil industry in terms of distribution...these two industries shared the consumption of another, more decisive commodity. The commercial power industry was the most vulnerable target set

Hourly elemental concentrations in PM2.5 aerosols sampled simultaneously at urban background and road site

NASA Astrophysics Data System (ADS)

Dall'Osto, M.; Querol, X.; Amato, F.; Karanasiou, A.; Lucarelli, F.; Nava, S.; Calzolai, G.; Chiari, M.

2012-08-01

Hourly-resolved aerosol chemical speciation data can be a highly powerful tool to determine the source origin of atmospheric pollutants in urban Environments. Aerosol mass concentrations of seventeen elements (Na, Mg, Al, S, Cl, K, Ca, Ti, V, Cr, Mn, Fe, Ni, Cu, Zn, Sr and Pb) were obtained by time (1 h) and size (PM2.5 particulate matter <2.5 μm) resolved Particle Induced X-ray Emission (PIXE) measurements. In the Marie Curie FP7-EU framework of SAPUSS (Solving Aerosol Problems by Using Synergistic Strategies), the unique approach used is the simultaneous PIXE measurements at two monitoring sites: urban background (UB) and a street canyon traffic road site (RS). Elements related to primary non exhaust traffic emission (Fe, Cu), dust resuspension (Ca) and anthropogenic Cl were found enhanced at the RS, whereas industrial related trace metals (Zn, Pb, Mn) were found at higher concentrations at the more ventilated UB site. When receptor modelling was performed with positive matrix factorization (PMF), nine different aerosol sources were identified at both sites: three types of regional aerosols (secondary sulphate (S) - 27%, biomass burning (K) - 5%, sea salt (Na-Mg) - 17%), three types of dust aerosols (soil dust (Al-Ti) - 17%, urban crustal dust (Ca) - 6%, and primary traffic non exhaust brake dust (Fe-Cu) - 7%), and three types industrial aerosol plumes-like events (shipping oil combustion (V-Ni) - 17%, industrial smelters (Zn-Mn) - 3%, and industrial combustion (Pb-Cl) - 5%). The validity of the PMF solution of the PIXE data is supported by strong correlations with external single particle mass spectrometry measurements. Beside apportioning the aerosol sources, some important air quality related conclusions can be drawn about the PM2.5 fraction simultaneously measured at the UB and RS sites: (1) the regional aerosol sources impact both monitoring sites at similar concentrations regardless their different ventilation conditions; (2) by contrast, local industrial aerosol plumes associated with shipping oil combustion and smelters activities have a higher impact on the more ventilated UB site; (3) a unique source of Pb-Cl (associated with industrial combustion emissions) is found a to be the major (82%) source of Cl in the urban agglomerate; (4) PM2.5 traffic brake dust (Fe-Cu) is mainly primarily emitted and not resuspended, whereas PM2.5 urban crustal dust (Ca) is found mainly resuspended by both traffic vortex and sea breeze; (5) urban dust (Ca) is found the aerosol source most affected by land wetness, reduced by a factor of eight during rainy days and suggesting that wet roads may be a solution for reducing dust concentrations in road sites, far more effective than street sweeping activities.

Ion source design for industrial applications

NASA Technical Reports Server (NTRS)

Kaufman, H. R.; Robinson, R. S.

1981-01-01

The design of broad-beam industrial ion sources is described. The approach used emphasizes refractory metal cathodes and permanent-magnet multipole discharge chambers. Design procedures and sample calculations are given for the discharge chamber, ion optics, cathodes, and magnetic circuit. Hardware designs are included for the isolator, cathode supports, anode supports, pole-piece assembly, and ion-optics supports. There are other ways of designing most ion source components, but the designs presented are representative of current technology and adaptable to a wide range of configurations.

48 CFR 8.601 - General.

Code of Federal Regulations, 2012 CFR

2012-10-01

... REQUIRED SOURCES OF SUPPLIES AND SERVICES Acquisition From Federal Prison Industries, Inc. 8.601 General. (a) Federal Prison Industries, Inc. (FPI), also referred to as UNICOR, is a self-supporting, wholly... minimize adverse impact on private industry. (d) Supplies manufactured and services performed by FPI are...

48 CFR 8.601 - General.

Code of Federal Regulations, 2014 CFR

2014-10-01

... REQUIRED SOURCES OF SUPPLIES AND SERVICES Acquisition From Federal Prison Industries, Inc. 8.601 General. (a) Federal Prison Industries, Inc. (FPI), also referred to as UNICOR, is a self-supporting, wholly... minimize adverse impact on private industry. (d) Supplies manufactured and services performed by FPI are...

48 CFR 8.601 - General.

Code of Federal Regulations, 2010 CFR

2010-10-01

... REQUIRED SOURCES OF SUPPLIES AND SERVICES Acquisition From Federal Prison Industries, Inc. 8.601 General. (a) Federal Prison Industries, Inc. (FPI), also referred to as UNICOR, is a self-supporting, wholly... minimize adverse impact on private industry. (d) Supplies manufactured and services performed by FPI are...

48 CFR 8.601 - General.

Code of Federal Regulations, 2011 CFR

2011-10-01

... REQUIRED SOURCES OF SUPPLIES AND SERVICES Acquisition From Federal Prison Industries, Inc. 8.601 General. (a) Federal Prison Industries, Inc. (FPI), also referred to as UNICOR, is a self-supporting, wholly... minimize adverse impact on private industry. (d) Supplies manufactured and services performed by FPI are...

48 CFR 8.601 - General.

Code of Federal Regulations, 2013 CFR

2013-10-01

... REQUIRED SOURCES OF SUPPLIES AND SERVICES Acquisition From Federal Prison Industries, Inc. 8.601 General. (a) Federal Prison Industries, Inc. (FPI), also referred to as UNICOR, is a self-supporting, wholly... minimize adverse impact on private industry. (d) Supplies manufactured and services performed by FPI are...

Microbial Exposure Assessment in Sawmill, Livestock Feed Industry, and Metal Working Fluids Handling Industry

PubMed Central

Park, Haedong; Lee, Inseop

2010-01-01

Objectives The objective of this study is to investigate the distribution patterns and exposure concentrations of bioaerosols in industries suspected to have high levels of bioaerosol exposure. Methods We selected 11 plants including 3 livestock feed plants (LF industry), 3 metal working fluids handling plants (MWFs industry), and 5 sawmills and measured total airborne bacteria, fungi, endotoxins, as well as dust. Airborne bacteria and fungi were measured with one stage impactor, six stage cascade impactor, and gelatin filters. Endotoxins were measured with polycarbonate filters. Results The geometric means (GM) of the airborne concentrations of bacteria, fungi, and endotoxins were 1,864, 2,252 CFU/m3, and 31.5 EU/m3, respectively at the sawmills, followed by the LF industry (535, 585 CFU/m3, and 22.0 EU/m3) and MWFs industry (258, 331 CFU/m3, and 8.7 EU/m3). These concentrations by industry type were significantly statistically different (p < 0.01). The ratio of indoor to outdoor concentration was 6.2, 1.9, 3.2, and 3.2 for bacteria, fungi, endotoxins, and dust in the LF industry, 5.0, 0.9, 2.3, and 12.5 in the MWFs industry, and 3.7, 4.1, 3.3, and 9.7 in sawmills. The respiratory fractions of bioaerosols were differentiated by bioaerosol types and industry types: the respiratory fraction of bacteria in the LF industry, MWF industry, and sawmills was 59.4%, 72.0%, and 57.7%, respectively, and that of fungi was 77.3%, 89.5%, and 83.7% in the same order. Conclusion We found that bioaerosol concentration was the highest in sawmills, followed by LF industry facilities and MWFs industry facilities. The indoor/outdoor ratio of microorganisms was larger than 1 and respiratory fraction of microorganisms was more than 50% of the total microorganism concentrations which might penetrate respiratory tract easily. All these findings suggest that bioaerosol in the surveyed industries should be controlled to prevent worker respiratory diseases. PMID:22953179

Effect of spray angle and spray volume on deposition of a medium droplet spray with air support in ivy pot plants.

PubMed

Foqué, Dieter; Pieters, Jan G; Nuyttens, David

2014-03-01

Spray boom systems, an alternative to the predominantly-used spray guns, have the potential to considerably improve crop protection management in glasshouses. Based on earlier experiments, the further optimization of the deposits of a medium spray quality extended range flat fan nozzle type using easy adjustable spray boom settings was examined. Using mineral chelate tracers and water sensitive papers, the spray results were monitored at three plant levels, on the upper side and the underside of the leaves, and on some off-target collectors. In addition, the deposition datasets of all tree experiments were compared. The data showed that the most efficient spray distribution with the medium spray quality flat fan nozzles was found with a 30° forward angled spray combined with air support and an application rate of 1000 L ha(-1) . This technique resulted in a more uniform deposition in the dense canopy and increased spray deposition on the lower side of the leaves compared with the a standard spray boom application. Applying 1000 L ha(-1) in two subsequent runs instead of one did not seem to show any added value. Spray deposition can be improved hugely simply by changing some spray boom settings like nozzle type, angling the spray, using air support and adjusting the spray volume to the crop. © 2013 Society of Chemical Industry.

Aerobic Oxidation of 5-(Hydroxymethyl)furfural Cyclic Acetal Enables Selective Furan-2,5-dicarboxylic Acid Formation with CeO2 -Supported Gold Catalyst.

PubMed

Kim, Minjune; Su, Yaqiong; Fukuoka, Atsushi; Hensen, Emiel J M; Nakajima, Kiyotaka

2018-05-14

The utilization of 5-(hydroxymethyl)furfural (HMF) for the large-scale production of essential chemicals has been largely limited by the formation of solid humin as a byproduct, which prevents the operation of stepwise batch-type and continuous flow-type processes. The reaction of HMF with 1,3-propanediol produces an HMF acetal derivative that exhibits excellent thermal stability. Aerobic oxidation of the HMF acetal with a CeO 2 -supported Au catalyst and Na 2 CO 3 in water gives a 90-95 % yield of furan 2,5-dicarboxylic acid, an increasingly important commodity chemical for the biorenewables industry, from concentrated solutions (10-20 wt %) without humin formation. The six-membered acetal ring suppresses thermal decomposition and self-polymerization of HMF in concentrated solutions. Kinetic studies supported by DFT calculations identify two crucial steps in the reaction mechanism, that is, the partial hydrolysis of the acetal into 5-formyl-2-furan carboxylic acid involving OH - and Lewis acid sites on CeO 2 , and subsequent oxidative dehydrogenation of the in situ generated hemiacetal involving Au nanoparticles. These results represent a significant advance over the current state of the art, overcoming an inherent limitation of the oxidation of HMF to an important monomer for biopolymer production. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Marquardt's Mach 4.5 Supercharged Ejector Ramjet (SERJ) High-Performance Aircraft Engine Project: Unfulfilled Aspirations Ca.1970

NASA Technical Reports Server (NTRS)

Escher, William J. D.; Roddy, Jordan E.; Hyde, Eric H.

2000-01-01

The Supercharged Ejector Ramjet (SERJ) engine developments of the 1960s, as pursued by The Marquardt Corporation and its associated industry team members, are described. In just three years, engineering work on this combined-cycle powerplant type evolved, from its initial NASA-sponsored reusable space transportation system study status, into a U.S. Air Force/Navy-supported exploratory development program as a candidate 4.5 high-performance military aircraft engine. Bridging a productive transition from the spaceflight to the aviation arena, this case history supports the expectation that fully-integrated airbreathing/rocket propulsion systems hold high promise toward meeting the demanding propulsion requirements of tomorrow's aircraft-like Spaceliner class transportation systems. Lessons to be learned from this "SERJ Story" are offered for consideration by today's advanced space transportation and combined-cycle propulsion researchers and forward-planning communities.

Metrological Support in Technosphere Safety

NASA Astrophysics Data System (ADS)

Akhobadze, G. N.

2017-11-01

The principle of metrological support in technosphere safety is considered. It is based on the practical metrology. The theoretical aspects of accuracy and errors of the measuring instruments intended for diagnostics and control of the technosphere under the influence of factors harmful to human beings are presented. The necessity to choose measuring devices with high metrological characteristics according to the accuracy class and contact of sensitive elements with a medium under control is shown. The types of additional errors in measuring instruments that arise when they are affected by environmental influences are described. A specific example of the analyzers application to control industrial emissions and measure the oil and particulate matter in wastewater is shown; it allows assessing advantages and disadvantages of analyzers. Besides, the recommendations regarding the missing metrological characteristics of the instruments in use are provided. The technosphere continuous monitoring taking into account the metrological principles is expected to efficiently forecast the technosphere development and make appropriate decisions.

Integrated worker health protection and promotion programs: overview and perspectives on health and economic outcomes.

PubMed

Pronk, Nicolaas P

2013-12-01

To describe integrated worker health protection and promotion (IWHPP) program characteristics, to discuss the rationale for the integration of occupational safety and health and worksite health promotion programs, and to summarize what is known about the impact of these programs on health and economic outcomes. A descriptive assessment of the current state of the IWHPP field and a review of studies on the effectiveness of IWHPP programs on health and economic outcomes were undertaken. Sufficient evidence of effectiveness was found for IWHPP programs when health outcomes were considered. Impact on productivity-related outcomes is considered promising, but inconclusive, whereas insufficient evidence was found for health care expenditures. Existing evidence supports an integrated approach in terms of health outcomes but will benefit significantly from research designed to support the business case for employers of various company sizes and industry types.

Integrated Worker Health Protection and Promotion Programs: Overview and Perspectives on Health and Economic Outcomes

PubMed Central

Pronk, Nicolaas P.

2014-01-01

Objective To describe integrated worker health protection and promotion (IWHPP) program characteristics, to discuss the rationale for integration of OSH and WHP programs, and to summarize what is known about the impact of these programs on health and economic outcomes. Methods A descriptive assessment of the current state of the IWHPP field and a review of studies on the effectiveness of IWHPP programs on health and economic outcomes. Results Sufficient evidence of effectiveness was found for IWHPP programs when health outcomes are considered. Impact on productivity-related outcomes is considered promising, but inconclusive, whereas insufficient evidence was found for health care expenditures. Conclusions Existing evidence supports an integrated approach in terms of health outcomes but will benefit significantly from research designed to support the business case for employers of various company sizes and industry types. PMID:24284747

DTREEv2, a computer-based support system for the risk assessment of genetically modified plants.

PubMed

Pertry, Ine; Nothegger, Clemens; Sweet, Jeremy; Kuiper, Harry; Davies, Howard; Iserentant, Dirk; Hull, Roger; Mezzetti, Bruno; Messens, Kathy; De Loose, Marc; de Oliveira, Dulce; Burssens, Sylvia; Gheysen, Godelieve; Tzotzos, George

2014-03-25

Risk assessment of genetically modified organisms (GMOs) remains a contentious area and a major factor influencing the adoption of agricultural biotech. Methodologically, in many countries, risk assessment is conducted by expert committees with little or no recourse to databases and expert systems that can facilitate the risk assessment process. In this paper we describe DTREEv2, a computer-based decision support system for the identification of hazards related to the introduction of GM-crops into the environment. DTREEv2 structures hazard identification and evaluation by means of an Event-Tree type of analysis. The system produces an output flagging identified hazards and potential risks. It is intended to be used for the preparation and evaluation of biosafety dossiers and, as such, its usefulness extends to researchers, risk assessors and regulators in government and industry. Copyright © 2013 Elsevier B.V. All rights reserved.

Development and status of Arkansas' primary forest products industry

Treesearch

Dennis M. May

1990-01-01

The development of Arkansas' primary forest products industry is presented by following the changes in numbers and types of mills operating through time as well as the State's production of roundwood to supply the changing industry.

15 CFR 801.9 - Reports required.

Code of Federal Regulations, 2011 CFR

2011-01-01

...); industrial engineering services; industrial-type maintenance, installation, alteration, and training services... services; educational and training services; engineering, architectural, and surveying services; financial... assets covered by the BE-125 survey are rights related to: Industrial processes and products; books...

15 CFR 801.9 - Reports required.

Code of Federal Regulations, 2010 CFR

2010-01-01

...); industrial engineering services; industrial-type maintenance, installation, alteration, and training services... services; educational and training services; engineering, architectural, and surveying services; financial... assets covered by the BE-125 survey are rights related to: Industrial processes and products; books...

15 CFR 801.9 - Reports required.

Code of Federal Regulations, 2012 CFR

2012-01-01

...); industrial engineering services; industrial-type maintenance, installation, alteration, and training services... services; educational and training services; engineering, architectural, and surveying services; financial... assets covered by the BE-125 survey are rights related to: Industrial processes and products; books...

5 CFR 532.303 - Specialized industry.

Code of Federal Regulations, 2010 CFR

2010-01-01

....303 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT CIVIL SERVICE REGULATIONS PREVAILING RATE SYSTEMS Determining Rates for Principal Types of Positions § 532.303 Specialized industry. (a)(1) Under... as specialized industries upon approval of the Office of Personnel Management. ...

Alcohol research and the alcoholic beverage industry: issues, concerns and conflicts of interest.

PubMed

Babor, Thomas F

2009-02-01

Using terms of justification such as 'corporate social responsibility' and 'partnerships with the public health community', the alcoholic beverage industry (mainly large producers, trade associations and 'social aspects' organizations) funds a variety of scientific activities that involve or overlap with the work of independent scientists. The aim of this paper is to evaluate the ethical, professional and scientific challenges that have emerged from industry involvement in alcohol science. Source material came from an extensive review of organizational websites, newspaper articles, journal papers, letters to the editor, editorials, books, book chapters and unpublished documents. Industry involvement in alcohol science was identified in seven areas: (i) sponsorship of research funding organizations; (ii) direct financing of university-based scientists and centers; (iii) studies conducted through contract research organizations; (iv) research conducted by trade organizations and social aspects/public relations organizations; (v) efforts to influence public perceptions of research, research findings and alcohol policies; (vi) publication of scientific documents and support of scientific journals; and (vii) sponsorship of scientific conferences and presentations at conferences. While industry involvement in research activities is increasing, it constitutes currently a rather small direct investment in scientific research, one that is unlikely to contribute to alcohol science, lead to scientific breakthroughs or reduce the burden of alcohol-related illness. At best, the scientific activities funded by the alcoholic beverage industry provide financial support and small consulting fees for basic and behavioral scientists engaged in alcohol research; at worst, the industry's scientific activities confuse public discussion of health issues and policy options, raise questions about the objectivity of industry-supported alcohol scientists and provide industry with a convenient way to demonstrate 'corporate responsibility' in its attempts to avoid taxation and regulation.

Retail trade incentives: how tobacco industry practices compare with those of other industries.

PubMed Central

Feighery, E C; Ribisl, K M; Achabal, D D; Tyebjee, T

1999-01-01

OBJECTIVES: This study compared the incentive payments for premium shelf space and discounts on volume purchases paid to retailers by 5 types of companies. METHODS: Merchants were interviewed at 108 randomly selected small retail outlets that sell tobacco in Santa Clara County, California. RESULTS: Significantly more retailers reported receiving slotting/display allowances for tobacco (62.4%) than for any other product type. An average store participating in a retailer incentive program received approximately $3157 annually from all sampled product types, of which approximately $2462 (78%) came from tobacco companies. CONCLUSIONS: Future research should assess the impact of tobacco industry incentive programs on the in-store marketing and sales practices of retailers. PMID:10511841

Retail trade incentives: how tobacco industry practices compare with those of other industries.

PubMed

Feighery, E C; Ribisl, K M; Achabal, D D; Tyebjee, T

1999-10-01

This study compared the incentive payments for premium shelf space and discounts on volume purchases paid to retailers by 5 types of companies. Merchants were interviewed at 108 randomly selected small retail outlets that sell tobacco in Santa Clara County, California. Significantly more retailers reported receiving slotting/display allowances for tobacco (62.4%) than for any other product type. An average store participating in a retailer incentive program received approximately $3157 annually from all sampled product types, of which approximately $2462 (78%) came from tobacco companies. Future research should assess the impact of tobacco industry incentive programs on the in-store marketing and sales practices of retailers.

Human Studies of Vertical and Horizontal Alveolar Ridge Augmentation Comparing Different Types of Bone Graft Materials: A Systematic Review.

PubMed

Chavda, Suraj; Levin, Liran

2018-02-01

Alveolar ridge augmentation can be completed with various types of bone augmentation materials (autogenous, allograft, xenograft, and alloplast). Currently, autogenous bone is labeled as the "gold standard" because of faster healing times and integration between native and foreign bone. No systematic review has currently determined whether there is a difference in implant success between various bone augmentation materials. The purpose of this article was to systematically review comparative human studies of vertical and horizontal alveolar ridge augmentation comparing different types of bone graft materials (autogenous, allograft, xenograft, and alloplast). A MEDLINE search was conducted under the 3 search concepts of bone augmentation, dental implants, and alveolar ridge augmentation. Studies pertaining to socket grafts or sinus lifts were excluded. Case reports, small case series, and review papers were excluded. A bias assessment tool was applied to the final articles. Overall, 219 articles resulted from the initial search, and 9 articles were included for final analysis. There were no discernible differences in implant success between bone augmentation materials. Generally, patients preferred nonautogenous bone sources as there were fewer hospital days, less pain, and better recovery time. Two articles had industrial support; however, conclusions of whether that support influenced the outcomes could not be determined. Future comparative studies should compare nonautogenous bone sources and have longer follow-up times.

Cold sweetening diversity in Andean potato germplasm from Argentina.

PubMed

Colman, Silvana L; Massa, Gabriela A; Carboni, Martín F; Feingold, Sergio E

2017-11-01

Cold-induced sweetening (CIS) is the accumulation of sucrose and reducing sugars in potato tubers at low temperatures. This process is central for the potato processing industry. During potato chip and French fry production, reducing sugars participate in the Maillard reaction to produce dark pigmented products not acceptable to consumers. Andean potatoes (Solanum tuberosum Group Andigena) constitute an enormous wealth of potato germplasm that can contribute to increase genetic diversity in breeding programs of many traits, including CIS. We analyzed reducing sugar content and chip quality in freshly harvested and cold-stored tubers from 48 native accessions. Andean accessions showed high variation in reducing sugar content and were classified in three types of CIS responses: type I, reducing sugar content before and after 4°C storage was lower than the value required by industry; type II, reducing sugar content before storage was acceptable, but after 4°C storage incremented up to non-acceptable levels; and type III, reducing sugar content was unacceptable before and after storage. Five Andean accessions presented acceptable reducing sugar content and good chip quality before and after 4°C storage in a consistent manner throughout several experiments. These features make them a useful source for improving the potato industry. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

Evaluation of participatory training in managing mental health for supervisory employees in the financial industry.

PubMed

Yoshikawa, Toru; Ogami, Ayumi; Muto, Takashi

2013-12-01

Industry-specific primary prevention measures for promoting mental health of workers were undertaken in 2008 and 2009 as a result of participatory training involving 130 supervisory employees in workplaces of the financial industry. These measures included the following five points suggested to be effective in the industry: 1) proper opportunities for training and career building, 2) control of work time and improving work organization, 3) standardization of tasks, 4) job rotation for sharing work responsibilities, and 5) increasing communication and mutual support. A post-training follow-up survey revealed that participatory, action-oriented training facilitated sharing of feasible measures and mutual support, leading to the development of measures easily introduced and established at each workplace. We concluded that mutually supportive group work of teams composed of members who held similar duty positions and were engaged in similar operations, using the Mental Health Action Checklist as a guiding tool, was effective for realizing implementation of optimally practical and specific measures.

78 FR 52777 - Draft Guidance for Industry on Bioequivalence Recommendations for Risperidone Injection...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-26

...] (Formerly Docket No. 2007D-0168) Draft Guidance for Industry on Bioequivalence Recommendations for... industry entitled ``Draft Guidance on Risperidone.'' The guidance provides specific recommendations on the design of bioequivalence (BE) studies to support abbreviated new drug applications (ANDAs) for...

Patient perspectives on physician conflict of interest in industry-sponsored clinical trials for multiple sclerosis therapeutics.

PubMed

Solomon, Andrew J; Klein, Eran P; Corboy, John R; Bernat, James L

2015-10-01

Pharmaceutical industry financial support of physicians, physician practices, and academic departments involved in multicenter industry-sponsored clinical trials of novel therapeutic agents is a relatively new and infrequently acknowledged source of potential physician conflict of interest. Detailed disclosure of these relationships to study participants is not uniformly a part of informed consent and documentation practices. To understand attitudes of patients with multiple sclerosis concerning disclosure of potential physician-industry conflicts of interest created by clinical trials and how such disclosures may influence study participation An anonymous online instrument was developed. 597 people with multiple sclerosis participated in the study. The study found that detailed disclosure of conflicts of interest is important to potential participants in industry-sponsored clinical trials for multiple sclerosis therapies and that the presence of these conflicts of interest may influence patients' decisions to participate in these studies. Findings from this study support a call for uniform guidelines regarding disclosure of physician-industry relationships to prospective research participants for industry-sponsored clinical trials. © The Author(s), 2015.

Manufacturing Credibility: The National Energy Management Institute and the Tobacco Institute's Strategy for Indoor Air Quality

PubMed Central

Balbach, Edith D.

2011-01-01

Objectives. We studied tobacco industry efforts during the 1980s and 1990s to promote the National Energy Management Institute (NEMI), a nonprofit organization, as an authority on indoor air quality as part of the industry's strategy to oppose smoke-free worksite policies. Methods. We analyzed tobacco industry documents, conducted literature searches in Lexis–Nexis for background and historical literature, and reviewed relevant public health and policy literature. Results. The tobacco industry provided more than US $6 million to NEMI to establish it as an authority on indoor air quality and to work with it to undermine support for smoke-free air policies by promoting ventilation as a solution to indoor air quality problems. Tobacco industry support for NEMI was not publicly disclosed. Conclusions. NEMI was a valuable ally for the tobacco industry through NEMI's ties to organized labor, its technical background, and its status as a third-party actor. NEMI also helped the industry to portray ventilation to improve overall indoor air quality and smoke-free worksites as an either–or choice; in fact, both can improve worker health. PMID:21233427

Manufacturing credibility: the National Energy Management Institute and the Tobacco Institute's strategy for indoor air quality.

PubMed

Campbell, Richard B; Balbach, Edith D

2011-03-01

We studied tobacco industry efforts during the 1980s and 1990s to promote the National Energy Management Institute (NEMI), a nonprofit organization, as an authority on indoor air quality as part of the industry's strategy to oppose smoke-free worksite policies. We analyzed tobacco industry documents, conducted literature searches in Lexis-Nexis for background and historical literature, and reviewed relevant public health and policy literature. The tobacco industry provided more than US $6 million to NEMI to establish it as an authority on indoor air quality and to work with it to undermine support for smoke-free air policies by promoting ventilation as a solution to indoor air quality problems. Tobacco industry support for NEMI was not publicly disclosed. NEMI was a valuable ally for the tobacco industry through NEMI's ties to organized labor, its technical background, and its status as a third-party actor. NEMI also helped the industry to portray ventilation to improve overall indoor air quality and smoke-free worksites as an either-or choice; in fact, both can improve worker health.

'To prove this is the industry's best hope': big tobacco's support of research on the genetics of nicotine addiction.

PubMed

Gundle, Kenneth R; Dingel, Molly J; Koenig, Barbara A

2010-06-01

New molecular techniques focus a genetic lens upon nicotine addiction. Given the medical and economic costs associated with smoking, innovative approaches to smoking cessation and prevention must be pursued; but can sound research be manipulated by the tobacco industry? The chronological narrative of this paper was created using iterative reviews of primary sources (the Legacy Tobacco Documents), supplemented with secondary literature to provide a broader context. The empirical data inform an ethics and policy analysis of tobacco industry-funded research. The search for a genetic basis for smoking is consistent with industry's decades-long plan to deflect responsibility away from the tobacco companies and onto individuals' genetic constitutions. Internal documents reveal long-standing support for genetic research as a strategy to relieve the tobacco industry of its legal responsibility for tobacco-related disease. Industry may turn the findings of genetics to its own ends, changing strategy from creating a 'safe' cigarette to defining a 'safe' smoker.

System Dynamics Model and Simulation of Employee Work-Family Conflict in the Construction Industry

PubMed Central

Wu, Guangdong; Duan, Kaifeng; Zuo, Jian; Yang, Jianlin; Wen, Shiping

2016-01-01

The construction industry is a demanding work environment where employees’ work-family conflict is particularly prominent. This conflict has a significant impact on job and family satisfaction and performance of employees. In order to analyze the dynamic evolution of construction industry employee’s work-family conflict between work and family domains, this paper constructs a bi-directional dynamic model framework of work-family conflict by referring to the relevant literature. Consequently, a system dynamics model of employee’s work-family conflict in the construction industry is established, and a simulation is conducted. The simulation results indicate that construction industry employees experience work interference with family conflict (WIFC) levels which are significantly greater than the family interference with work conflict (FIWC) levels. This study also revealed that improving work flexibility and organizational support can have a positive impact on the satisfaction and performance of construction industry employees from a work and family perspective. Furthermore, improving family support can only significantly improve employee job satisfaction. PMID:27801857

System Dynamics Model and Simulation of Employee Work-Family Conflict in the Construction Industry.

PubMed

Wu, Guangdong; Duan, Kaifeng; Zuo, Jian; Yang, Jianlin; Wen, Shiping

2016-10-28

The construction industry is a demanding work environment where employees' work-family conflict is particularly prominent. This conflict has a significant impact on job and family satisfaction and performance of employees. In order to analyze the dynamic evolution of construction industry employee's work-family conflict between work and family domains, this paper constructs a bi-directional dynamic model framework of work-family conflict by referring to the relevant literature. Consequently, a system dynamics model of employee's work-family conflict in the construction industry is established, and a simulation is conducted. The simulation results indicate that construction industry employees experience work interference with family conflict (WIFC) levels which are significantly greater than the family interference with work conflict (FIWC) levels. This study also revealed that improving work flexibility and organizational support can have a positive impact on the satisfaction and performance of construction industry employees from a work and family perspective. Furthermore, improving family support can only significantly improve employee job satisfaction.

The role of industry in Internet education.

PubMed

Wieting, Mark W; Mevis, Howard; Zuckerman, Joseph D

2003-07-01

Each year hundreds of accredited continuing medical education conferences and meetings receive industry support through unrestricted educational grants. Many of these programs might not occur without this funding support. With the explosive growth of continuing medical education on the Internet, industry again is being asked to provide assistance through unrestricted educational grants and in some instances educational content. At the same time, industry is using the Internet to provide orthopaedic surgeons with education and information about their products and services. Education and information do not require continuing medical education accreditation to be valuable. Although some people in continuing medical education voice ethical concerns regarding the nature of industry's involvement in education, meeting the needs of orthopaedic surgeons remains the top priority. As demands on the orthopaedic surgeons' time continue to impact participation in educational meetings, industry will continue to play a critical role in helping educational organizations such as medical specialty societies develop new, innovative educational programs for presentation via the Internet.

Limitation of Biofuel Production in Europe from the Forest Market

NASA Astrophysics Data System (ADS)

Leduc, Sylvain; Wetterlund, Elisabeth; Dotzauer, Erik; Kindermann, Georg

2013-04-01

The European Union has set a 10% target for the share of biofuel in the transportation sector to be met by 2020. To reach this target, second generation biofuel is expected to replace 3 to 5% of the transport fossil fuel consumption. But the competition on the feedstock is an issue and makes the planning for the second generation biofuel plant a challenge. Moreover, no commercial second generation biofuel production plant is under operation, but if reaching commercial status, this type of production plants are expected to become very large. In order to minimize the tranportation costs and to takle the competetion for the feedstock against the existing woody based industries, the geographical location of biofuel production plants becomes an issue. This study investigates the potential of second generation biofuel economically feasible in Europe by 2020 in regards with the competition for the feedsstock with the existing woody biomass based industries (CHP, pulp and paper mills, sawmills...). To assess the biofuel potential in Europe, a techno-economic, geographically explicit model, BeWhere, is used. It determines the optimal locations of bio-energy production plants by minimizing the costs and CO2 emissions of the entire supply chain. The existing woody based industries have to first meet their wood demand, and if the amount of wood that remains is suficiant, new bio-energy production plants if any can be set up. Preliminary results show that CHP plants are preferably chosen over biofuel production plants. Strong biofuel policy support is needed in order to consequently increase the biofuel production in Europe. The carbon tax influences the emission reduction to a higher degree than the biofuel support. And the potential of second generation biofuel would at most reach 3% of the European transport fuel if the wood demand does not increase from 2010.

Career Guide to Industries, 2000-01 Edition. Bulletin 2523.

ERIC Educational Resources Information Center

Bureau of Labor Statistics (DOL), Washington, DC.

This document provides information on the nature, working conditions, and employment opportunities of 42 industries that accounted for nearly 3 of 4 wage and salary jobs in 1998. The following are among the types of information provided for each industry discussed: (1) nature of the industry (goods produced and services provided, individual…

Missouri timber industry - an assessment of timber product output and use, 1997.

Treesearch

Ronald J. Piva; Shelby G. Jones; Lynn W. Barnickol; Thomas B. Treiman

2000-01-01

Discusses recent Missouri forest industry trends; production and receipts of industrial roundwood; and production of saw logs, veneer logs, cooperage, charcoal, and other products in 1997, and compares findings with earlier surveys. Reports on quantity, type, and disposition of wood and bark residues generated by the primary wood-using industry.

78 FR 4417 - Draft Guidance for Industry and Food and Drug Administration Staff; Submissions for Postapproval...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-22

... intends to provide the underlying principles to determine the type of marketing submission that may be... industry and FDA staff on the underlying principles to determine the type of marketing submission that may... Modifications to a Combination Product Approved Under Certain Marketing Applications; Availability AGENCY: Food...

78 FR 14305 - Draft Guidance for Industry and Food and Drug Administration Staff; Types of Communication During...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-05

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2013-D-0147] Draft Guidance for Industry and Food and Drug Administration Staff; Types of Communication During the Review of Medical Device Submissions; Availability AGENCY: Food and Drug Administration, HHS. ACTION...

Low vision rehabilitation and ocular problems among industrial workers in a developing country.

PubMed

Omar, R; Knight, V F; Aziz Mohammed, M A

2014-01-01

Work-related ocular injuries and illnesses were among the major causes of job absenteeism. This study was conducted to determine if low vision rehabilitation was provided following work-related ocular problems among industrial workers in a developing country. This was a retrospective analysis of case records. Randomly selected records of all employees from the Social Security Organization (SOCSO) Medical Board for 2004 who suffered from ocular injuries and illnesses were selected. Rates of ocular injuries and illnesses according to age, gender, races, types of injuries, types of industries, visual rehabilitation and types of medical interventions were tabulated and analysed. A total of 26 cases of ocular injuries and illnesses were identified where 46.2% suffered from ocular injuries. The remaining 53.8% had ocular and/or systemic diseases. The 40-49-yearold age group suffered the greatest number of injuries (26.92%). Ocular perforating injuries (66.67%) and ocular contusions (33.33%) were the most common types of ocular injury among industrial workers in Kuala Lumpur. Most injuries occurred among workers in the service industry (50%). Almost 60% of these injured workers did not receive any low vision rehabilitation after medical intervention while 25% were given contact lenses or spectacles as rehabilitation and remaining had surgery. The low vision rehabilitation is still unexplored in the management of ocular injuries and illnesses among industrial workers. Introducing low vision rehabilitation can benefit both workers and employers as it provides care beyond spectacles or contact lens prescriptions.

Catalysis on Single Supported Atoms

DOE Office of Scientific and Technical Information (OSTI.GOV)

DeBusk, Melanie Moses; Narula, Chaitanya Kumar

2015-01-01

The highly successful application of supported metals as heterogeneous catalysts in automotive catalysts, fuel cells, and other multitudes of industrial processes have led to extensive efforts to understand catalyst behavior at the nano-scale. Recent discovery of simple wet methods to prepare single supported atoms, the smallest nano-catalyst, has allowed for experimental validation of catalytic activity of a variety of catalysts and potential for large scale production for such catalysts for industrial processes. In this chapter, we summarize the synthetic and structural aspects of single supported atoms. We also present proposed mechanisms for the activity of single supported catalysts where conventionalmore » mechanisms cannot operate due to lack of M-M bonds in the catalysts.« less

Online Chats to Assess Stakeholder Perceptions of Meat Chicken Intensification and Welfare

PubMed Central

Howell, Tiffani J.; Rohlf, Vanessa I.; Coleman, Grahame J.; Rault, Jean-Loup

2016-01-01

Simple Summary Most people care about animal welfare. Nevertheless, divergent views remain on what constitutes animal welfare, despite a growing body of scientific evidence. We used online chats to trigger discussion among participants from various stakeholder groups: general public, animal advocacy group, meat chicken industry-affiliated, and researchers or veterinarians who were not industry-affiliated but had experience with chickens. The aim of this pilot study was to assess reasons for divergence in opinions or conversely agreement between participants, using the topic of the welfare implications of meat chicken farming intensification. Participants also completed a pre- and post-chat survey to evaluate their perceptions and knowledge of chicken farming. Reasons for supporting intensification included perceptions of better health for the chickens and the sustainability of the system. Reasons for opposition included perceptions of the large number of animals kept together, and limited ability to perform natural behaviours. Misunderstandings about current practices were clarified in chats which contained industry-affiliated participants. Participants agreed on the need for enforceable standards and industry transparency. On average, objective knowledge of intensification increased after participating in the chat, but support for intensification did not change over the course of the study, counter to assertions that lack of knowledge results in lack of support for some practices. Engaging stakeholders can provide valuable information to anyone interested in the relationship between perception and knowledge of specific farming practices. Abstract Evidence suggests that there is variation in support for specific chicken farming practices amongst stakeholder groups, and this should be explored in more detail to understand the nature of these differences and work towards convergence. Online focus groups were used to assess attitudes to animal welfare in meat chicken farming in this pilot study. Across six online chats, 25 participants (general public, n = 8; animal advocacy group, n = 11, meat chicken industry, n = 3; research or veterinary practice who had experience with poultry but no declared industry affiliation, n = 3) discussed meat chicken intensification and welfare. Of those, 21 participants completed pre- and post-chat surveys gauging perceptions and objective knowledge about meat chicken management. Main reasons for intensification support were perceptions of improved bird health, and perceptions that it is a cost-effective, sustainable farming system. Reasons for opposition included perceptions that a large number of birds kept are in close proximity and have limited ability to perform natural behaviours. Misunderstandings about current practices were clarified in chats which contained industry representation. Participants agreed on the need for enforceable standards and industry transparency. Industry-affiliated members rated welfare of meat chickens higher, and gave lower ratings for the importance of natural living, than other stakeholder groups (both p = 0.001). On average, while objective knowledge of intensification increased after chat participation (p = 0.03), general welfare ratings and support for intensification did not change over time, counter to assertions that lack of knowledge results in lack of support for some practices. PMID:27801776

[Conflict of interest regarding clinical physicians' relationship with pharmaceutical industry and medical education].

PubMed

Miyata, Yasushi

2010-01-01

The relationship between clinical physicians and the pharmaceutical industry is becoming an important social issue. Many lawsuits against drug companies in the area of psychiatric medicine have been heavily covered by the mass media in the U.S., and the injustices of drug companies and clinical physicians have been revealed in court. Although there are few such large social issues in Japan, the relationship between clinical physicians and the pharmaceutical industry in Japan appears inappropriate. A study on the relationship between Japanese clinical physicians and the pharmaceutical industry revealed that many physicians received "gifts" from pharmaceutical companies. This is one form of evidence for the inappropriate relationship between Japanese physicians and pharmaceutical industries. Recently, many recommendations to realize an appropriate relationship between physicians and the pharmaceutical industry have been published in the U.S. However, discussion concerning the relationship between clinical physicians and pharmaceutical companies in Japan is not active. We have received a lot of financial support for continuing medical education from pharmaceutical industries. Without such support, we may not be able to maintain the same level of medical education. Understanding such present conditions, we need to discuss what is an appropriate relationship between clinical physicians and the pharmaceutical industry.

Mask Industry Assessment: 2011

NASA Astrophysics Data System (ADS)

Chan, Y. David

2011-11-01

A survey supported by SEMATECH and administered by David Powell Consulting was sent to microelectronics industry leaders to gather information about the mask industry as an objective assessment of its overall condition. The survey was designed with the input of semiconductor company mask technologists and merchant mask suppliers. This year's assessment is the tenth in the current series of annual reports. With ongoing industry support, the report has been used as one of the baselines to gain perspective on the technical and business status of the mask and microelectronics industries. It continues to serve as a valuable reference to identify the strengths and opportunities of the mask industry. The results will be used to guide future investments pertaining to critical path issues. This year's survey was essentially the same as the 2005 through 2010 surveys. Questions are grouped into following categories: General Business Profile Information, Data Processing, Yields and Yield Loss Mechanisms, Delivery Times, Returns, and Services. Within each category are multiple questions that result in a detailed profile of both the business and technical status of the critical mask industry. This profile combined with the responses to past surveys represents a comprehensive view of changes in the industry.

Mask industry assessment: 2008

NASA Astrophysics Data System (ADS)

Hughes, Greg; Yun, Henry

2008-10-01

Microelectronics industry leaders routinely name the cost and cycle time of mask technology and mask supply as top critical issues. A survey was created with support from SEMATECH and administered by David Powell Consulting to gather information about the mask industry as an objective assessment of its overall condition. The survey is designed with the input of semiconductor company mask technologists, merchant mask suppliers, and industry equipment makers. This year's assessment is the seventh in the current series of annual reports. With ongoing industry support, the report can be used as a baseline to gain perspective on the technical and business status of the mask and microelectronics industries. The report will continue to serve as a valuable reference to identify the strengths and opportunities of the mask industry. The results will be used to guide future investments pertaining to critical path issues. This year's survey is basically the same as the 2005 through 2007 surveys. Questions are grouped into categories: General Business Profile Information, Data Processing, Yields and Yield Loss Mechanisms, Delivery Times, Returns, and Services. Within each category is a multitude of questions that create a detailed profile of both the business and technical status of the critical mask industry.

Mask Industry Assessment: 2010

NASA Astrophysics Data System (ADS)

Hughes, Greg; Chan, David Y.

2010-09-01

A survey created supported by SEMATECH and administered by David Powell Consulting was sent to microelectronics industry leaders to gather information about the mask industry as an objective assessment of its overall condition. The survey was designed with the input of semiconductor company mask technologists and merchant mask suppliers. This year's assessment is the ninth in the current series of annual reports. With ongoing industry support, the report can be used as a baseline to gain perspective on the technical and business status of the mask and microelectronics industries. It will continue to serve as a valuable reference to identify the strengths and opportunities of the mask industry. The results will be used to guide future investments pertaining to critical path issues. This year's survey was basically the same as the 2005 through 2009 surveys. Questions are grouped into categories: General Business Profile Information, Data Processing, Yields and Yield Loss Mechanisms, Delivery Times, Returns, and Services. Within each category are multiple questions that result in a detailed profile of both the business and technical status of the critical mask industry. This profile combined with the responses to past surveys represents a comprehensive view of changes in the industry.

CAD-supported university course on photonics and fiber optic communications

NASA Astrophysics Data System (ADS)

Chan, David K. C.; Richter, Andre

2002-05-01

The highly competitive global photonics industry has created a significant demand for professional Photonic Design Automation (PDA) tools and personnel trained to use them effectively. In such a dynamic field, CAD-supported courses built around widely used industrial PDA tools provide many advantages, especially when offered through tertiary education institutions (which are ideally suited to producing the future workforce of the Photonics industry). An objective of VPIsystems' University program is to develop tertiary level courses based on VPIsystems' WDM transmission and component modeling software tools. Advantages offered by such courses include: visualizing and aiding the understanding of complex physical problems encountered in the design of fiber-optic communication systems; virtual laboratory exercises that can accurately reproduce the behavior of real systems and components without the prohibitive infrastructure and maintenance costs of real laboratories; flexibility in studying interrelated physical effects individually or in combination to facilitate learning; provide expertise and practical insights in areas, including industry-focused topics, that are not generally covered in traditional tertiary courses; provide exposure to, currently, the most widely used PDA tools in the industry. In this paper, details of VPIsystems' University program and its CAD-supported Photonics courses will be presented.

The money blind: how to stop industry bias in biomedical science, without violating the First Amendment.

PubMed

Robertson, Christopher T

2011-01-01

The pharmaceutical and medical device industries use billions of dollars to support the biomedical science that physicians, regulators, and patients use to make healthcare decisions--the decisions that drive an increasingly large portion of the American economy. Compelling evidence suggests that this industry money buys favorable results, biasing the outcomes of scientific research. Current efforts to manage the problem, including disclosure mandates and peer reviews, are ineffective. A blinding mechanism, operating through an intermediary such as the National Institutes of Health, could instead be developed to allow industry support of science without allowing undue influence. If the editors of biomedical journals fail to mandate that industry funders utilize such a solution, the federal government has several regulatory levers available, including conditioning federal funding and direct regulation, both of which could be done without violating the First Amendment.

How Canada Changed from Exporting Asbestos to Banning Asbestos: The Challenges That Had to Be Overcome.

PubMed

Ruff, Kathleen

2017-09-27

Less than ten years ago, the asbestos industry enjoyed the support of every Quebec and Canadian political party. The Chrysotile Institute and the International Chrysotile Association, both located in Quebec, aggressively marketed asbestos around the world, claiming scientific evidence showed that chrysotile asbestos could be safely used. The industry created a climate of intimidation. Consequently, no groups advocating for victims of asbestos or campaigning for its outright ban existed in Quebec to challenge the industry. A campaign was launched to mobilize the scientific community to speak out. Working with scientists, activists, and asbestos victims around the world, a small group of Quebec scientists exposed the false arguments of the asbestos industry. They publicly and repeatedly challenged the unscientific and unethical asbestos policy of the government. By appealing to Quebec values and holding those in power accountable, the campaign won public support and succeeded against all odds in defeating the asbestos industry.

Empirically observed learning rates for concentrating solar power and their responses to regime change

NASA Astrophysics Data System (ADS)

Lilliestam, Johan; Labordena, Mercè; Patt, Anthony; Pfenninger, Stefan

2017-07-01

Concentrating solar power (CSP) capacity has expanded slower than other renewable technologies and its costs are still high. Until now, there have been too few CSP projects to derive robust conclusions about its cost development. Here we present an empirical study of the cost development of all operating CSP stations and those under construction, examining the roles of capacity growth, industry continuity, and policy support design. We identify distinct CSP expansion phases, each characterized by different cost pressure in the policy regime and different industry continuity. In 2008-2011, with low cost pressure and following industry discontinuity, costs increased. In the current phase, with high cost pressure and continuous industry development, costs decreased rapidly, with learning rates exceeding 20%. Data for projects under construction suggest that this trend is continuing and accelerating. If support policies and industrial structure are sustained, we see no near-term factors that would hinder further cost decreases.

Research on layout and construction performance of cultural and creative industry parks in Xihu District of Hangzhou

NASA Astrophysics Data System (ADS)

Wang, Juan; Zhou, Jun

2018-05-01

Combing the current situation of cultural and creative industry parks in Xihu District of Hangzhou, analyzing the supporting elements of its layout, cultural and creative industry Pars in Xihu District have the characteristics of obvious group block distribution and the dominant function of each park is obviously influenced by the supporting elements. This paper selected four municipal cultural and creative industry parks for the investigation of their operating conditions. It is found out that the park construction performance of different construction foundation, positioning, development model is quite afferent. Therefore, it suggests that the creative industry park should be integrated with urban life, commerce, business and other functions. The park with weak ecological foundation should optimize the image of the park by means of urban renewal, and the policy should be inclined to retain talents and so on.

Rolling-element bearings in China: From ancient times to the 20th century

NASA Astrophysics Data System (ADS)

Sun, Lie; Li, Ang

2016-03-01

The development of rolling-element bearings in China has spanned a long period. Based on several typical and important cases, the present article reconstructs the history of rolling-element bearings in China by dividing it into four stages according to the various characteristics of the bearings. The first stage represents the origin of rolling bearings in China, which remains controversial because of several suspected races and cages that were likely the components of bearings more than a millennium ago. At the second stage, a type of simple roller bearing was used for astronomical instruments not later than the 13th century based on clear philological and physical evidence. A similar bearing was also applied to an abridged armillary in the 17th century. Another type of spherical thrust bearings with rolling elements, which is a key component of a traditional Chinese windmill, could support a rotating shaft that moves rotationally and at an angle. At the third stage, the Chinese began studying and using the so-called Europeanstyle bearing since the 17th century. Moreover, over the last 100 years, the modern rolling bearing industry was gradually established in China, particularly because of the technology transfer from the Soviet Union in the 1950s. At the fourth stage, the Chinese government initiated the relatively rapid development of bearing technology. The government launched the "bearing movement" from the 1950s to the 1960s to establish the modern bearing industry and to promote rolling bearings as replacement for traditional sliding bearings. Furthermore, a number of large professional factories and institutions in China have continually introduced advanced technology and equipment. At present, these companies and institutions play a significant role in the international bearing industry.

Assessing business responses to HIV / AIDS in Kenya.

PubMed

Roberts, M; Wangombe, J

1995-01-01

A consulting firm conducted interviews with managers of 16 businesses in 3 Kenyan cities, representatives of 2 trade unions, focus groups with workers at 13 companies, and an analysis of financial/labor data from 4 companies. It then did a needs assessment. The business types were light industry, manufacturing companies, tourism organizations, transport firms, agro-industrial and plantation businesses, and the service industry. Only one company followed all the workplace policy principles recommended by the World Health Organization and the International Labor Organization. Six businesses required all applicants and/or employees to undergo HIV testing. All their managers claimed that they would not discriminate against HIV-infected workers. Many workers thought that they would be fired if they were--or were suspected to be--HIV positive. Lack of a non-discrimination policy brings about worker mistrust of management. 11 companies had some type of HIV/AIDS education program. All the programs generated positive feedback. The main reasons for not providing HIV/AIDS education for the remaining 5 companies were: no employee requests, fears that it would be taboo, and assumptions that workers could receive adequate information elsewhere. More than 90% of all companies distributed condoms. 60% offered sexually transmitted disease diagnosis and treatment. About 33% offered counseling. Four companies provided volunteer HIV testing. Almost 50% of companies received financial or other external support for their programs. Most managers thought AIDS to be a problem mainly with manual staff and not with professional staff. Almost all businesses offered some medical benefits. The future impact of HIV/AIDS would be $90/employee/year (by 2005, $260) due to health care costs, absenteeism, retraining, and burial benefits. The annual costs of a comprehensive workplace HIV/AIDS prevention program varied from $18 to $54/worker at one company.

Managing the marine aquarium trade: revealing the data gaps using ornamental polychaetes.

PubMed

Murray, Joanna M; Watson, Gordon J; Giangrande, Adriana; Licciano, Margherita; Bentley, Matt G

2012-01-01

The marine aquarium industry has great potential to generate jobs in low-income coastal communities creating incentives for the maintenance of a healthy coral reef, if effectively managed. In the absence of current monitoring or legislation to govern the trade, baseline information regarding the species, number and source location of animals traded is missing despite being critical for its successful management and sustainability. An industry assessment to establish the number and provenance of species of ornamental polychaetes (sabellids and serpulids) traded was undertaken across UK wholesalers and retailers. Six geographical regions exporting fan worms were identified. Singapore contributed the highest percentage of imports, but of only one worm "type" whereas Bali, the second largest source, supplied five different worm "types". Over 50% of UK retailers were supplied by one wholesaler while the remainder were stocked by a mixture of one other wholesaler and/or direct imports from the source country. We estimate that up to 18,500 ornamental polychaetes (16,980 sabellids and 1,018 serpulids) are sold annually in the UK revealing a drastic underestimation of currently accepted trade figures. Incorrect identification (based on exporting region or visual characteristics) of traded animals exacerbates the inaccuracy in market quantification, although identification of preserved sabellids using published keys proved just as inconclusive with high within-species variability and the potential for new or cryptic species. A re-description of the polychaete groups traded using a combination of molecular and morphological techniques is necessary for effective identification and market quantification. This study provides the first assessment of ornamental polychaetes but more importantly highlights the issues surrounding the collection of baseline information necessary to manage the aquarium trade. We recommend that future management should be community based and site-specific with financial and educational support from NGOs, local governments and industry members.

Indirect Cost Reimbursement: An Industrial View.

ERIC Educational Resources Information Center

Bolton, Robert

1987-01-01

The meaning of indirect costs in an industrial environment is discussed. Other factors considered are corporate policies; nature of work being supported; the uniqueness of the work; who is doing the negotiating for industry; and indirect rates. Suggestions are offered for approaches to indirect cost reimbursement. (Author/MLW)

Corruption and internal fraud in the Turkish construction industry.

PubMed

Gunduz, Murat; Önder, Oytun

2013-06-01

The purpose of this paper is to develop an understanding about the internal fraud and corruption problem in the Turkish construction industry. The reasons behind the internal fraud and corruption problem as well as the types of prevention methods were investigated; and as a result various recommendations were made. To this end, a risk awareness questionnaire was used to understand the behavioral patterns of the construction industry, and to clarify possible proactive and reactive measures against internal fraud and corruption. The type of fraud experienced by Turkish construction companies was also surveyed in the questionnaire. The questionnaire was sent to 89 firms; and depending on the collected data, certain recommendations for construction industry professionals were provided.

Survey of Environmental Issues in the Civilian Aviation Industry

DOT National Transportation Integrated Search

1996-01-01

The civilian aviation industry is increasingly being required to comply with the myriad environmental laws currently in force. To gain a better understanding of the types of environmental issues that are being dealt with in the industry, a survey of ...

Comparative study on life cycle environmental impact assessment of copper and aluminium cables

NASA Astrophysics Data System (ADS)

Bao, Wei; Lin, Ling; Song, Dan; Guo, Huiting; Chen, Liang; Sun, Liang; Liu, Mei; Chen, Jianhua

2017-11-01

With the rapid development of industrialization and urbanization in China, domestic demands for copper and aluminium resources increase continuously and the output of copper and aluminium minerals rises steadily. The output of copper in China increased from 0.6 million tons (metal quantity) in 2003 to 1.74 million tons (metal quantity) in 2014, and the output of bauxite increased from 21 million tons in 2006 to 59.21 million tons in 2014. In the meantime, the import of copper and aluminium minerals of China is also on a rise. The import of copper concentrate and bauxite increased from 4.94 million tons and 9.68 million tons in 2006 to 10.08 million tons and 70.75 million tons in 2013 respectively. Copper and aluminium resources are widely applied in fields such as construction, electrical and electronics, machinery manufacturing, and transportation, and serve as important material basis for the national economic and social development of China. Cable industry is a typical industry where copper and aluminium resources are widely used. In this paper, a product assessment model is built from the perspective of product life cycle. Based on CNLCD database, differences in environmental impacts of copper and aluminium cables are analyzed from aspects such as resource acquisition, product production, transportation, utilization, and resource recycling. Furthermore, the advantages and disadvantages of products at different stages with different types of environmental impact are analyzed, so as to provide data support for cable industry in terms of product design and production, etc.

Kinetic models in industrial biotechnology - Improving cell factory performance.

PubMed

Almquist, Joachim; Cvijovic, Marija; Hatzimanikatis, Vassily; Nielsen, Jens; Jirstrand, Mats

2014-07-01

An increasing number of industrial bioprocesses capitalize on living cells by using them as cell factories that convert sugars into chemicals. These processes range from the production of bulk chemicals in yeasts and bacteria to the synthesis of therapeutic proteins in mammalian cell lines. One of the tools in the continuous search for improved performance of such production systems is the development and application of mathematical models. To be of value for industrial biotechnology, mathematical models should be able to assist in the rational design of cell factory properties or in the production processes in which they are utilized. Kinetic models are particularly suitable towards this end because they are capable of representing the complex biochemistry of cells in a more complete way compared to most other types of models. They can, at least in principle, be used to in detail understand, predict, and evaluate the effects of adding, removing, or modifying molecular components of a cell factory and for supporting the design of the bioreactor or fermentation process. However, several challenges still remain before kinetic modeling will reach the degree of maturity required for routine application in industry. Here we review the current status of kinetic cell factory modeling. Emphasis is on modeling methodology concepts, including model network structure, kinetic rate expressions, parameter estimation, optimization methods, identifiability analysis, model reduction, and model validation, but several applications of kinetic models for the improvement of cell factories are also discussed. Copyright © 2014 The Authors. Published by Elsevier Inc. All rights reserved.

Ubiquitous Health in Korea: Progress, Barriers, and Prospects

PubMed Central

Lee, Yountae

2012-01-01

Objectives Korea has one of the most advanced information technology (IT) infrastructures in the world, and the application of IT in health systems is rapidly progressing from computerization to information systems, ubiquitous systems, and smart systems. This study aims to analyze Korean environments in regards to the development of their u-Health industry and propose directions for u-Healthcare services based on this analysis. Methods This paper reviews the background, progress history, and current status of u-Health in Korea, and suggests strategies for the u-Health industry based on an analysis of its barriers and obstacles. Results When u-Health was introduced to Koreans, their policies and approaches focused mainly on environmental factors, yet these efforts have not progressed further to impact the u-Healthcare service industry itself. To develop the u-Healthcare industry, four points need to be considered: the development and support of the practical service model, institutional support, support of core technology and industry, and the institutionalization of health management service. Conclusions Korea is at a strategic point to start building u-Healthcare service delivery models. u-Healthcare is a healthcare service that provides added value through u-Health environments. By identifying critical success factors in u-Healthcare, we can strengthen the u-Health industry and implement policies to coordinate our efforts in the process of value chains to which we belong. PMID:23346474

Carolinas Energy Career Center

DOE Office of Scientific and Technical Information (OSTI.GOV)

Classens, Anver; Hooper, Dick; Johnson, Bruce

2013-03-31

Central Piedmont Community College (CPCC), located in Charlotte, North Carolina, established the Carolinas Energy Career Center (Center) - a comprehensive training entity to meet the dynamic needs of the Charlotte region's energy workforce. The Center provides training for high-demand careers in both conventional energy (fossil) and renewable energy (nuclear and solar technologies/energy efficiency). CPCC completed four tasks that will position the Center as a leading resource for energy career training in the Southeast: • Development and Pilot of a New Advanced Welding Curriculum, • Program Enhancement of Non-Destructive Examination (NDE) Technology, • Student Support through implementation of a model targetedmore » toward Energy and STEM Careers to support student learning, • Project Management and Reporting. As a result of DOE funding support, CPCC achieved the following outcomes: • Increased capacity to serve and train students in emerging energy industry careers; • Developed new courses and curricula to support emerging energy industry careers; • Established new training/laboratory resources; • Generated a pool of highly qualified, technically skilled workers to support the growing energy industry sector.« less

The future of veterinary communication: Partnership or persuasion? A qualitative investigation of veterinary communication in the pursuit of client behaviour change

PubMed Central

Bard, Alison M.; Main, David C. J.; Haase, Anne M.; Whay, Helen R.; Roe, Emma J.; Reyher, Kristen K.

2017-01-01

Client behaviour change is at the heart of veterinary practice, where promoting animal health and welfare is often synonymous with engaging clients in animal management practices. In the medical realm, extensive research points to the link between practitioner communication and patient behavioural outcomes, suggesting that the veterinary industry could benefit from a deeper understanding of veterinarian communication and its effects on client motivation. Whilst extensive studies have quantified language components typical of the veterinary consultation, the literature is lacking in-depth qualitative analysis in this context. The objective of this study was to address this deficit, and offer new critical insight into veterinary communication strategies in the pursuit of client behaviour change. Role-play interactions (n = 15) between UK cattle veterinarians and an actress experienced in medical and veterinary education were recorded, transcribed and analysed thematically. Analysis revealed that, overall, veterinarians tend to communicate in a directive style (minimal eliciting of client opinion, dominating the consultation agenda, prioritising instrumental support), reflecting a paternalistic role in the consultation interaction. Given this finding, recommendations for progress in the veterinary industry are made; namely, the integration of evidence-based medical communication methodologies into clinical training. Use of these types of methodologies may facilitate the adoption of more mutualistic, relationship-centred communication in veterinary practice, supporting core psychological elements of client motivation and resultant behaviour change. PMID:28257511

Vaccine development and deployment: opportunities and challenges in India.

PubMed

Gupta, Sanjukta Sen; Nair, G Balakrish; Arora, Narendra Kumar; Ganguly, Nirmal Kumar

2013-04-18

The Indian economy is among the fastest growing economies in the world. The country forayed into manufacturing vaccines starting with a few public-sector manufacturers in the late 1960s but has emerged as the major supplier of basic Expanded Programme on Immunization vaccines to the United Nations Children's Fund (UNICEF) because of substantial private-sector investment in the area. The Indian vaccine industry is now able to produce new and more complex vaccines such as the meningitis, Haemophilus influenzae type b, and pneumococcal conjugate vaccines, rotavirus vaccine and influenza A (H1N1) vaccines. This has been possible because of an attractive investment environment, effective and innovative governmental support, international partnerships and the growing in-country technical work force. A large number of vaccines, including those mentioned, is available and administered in the private sector within the country, but India has been slow in introducing new vaccines in its publically funded programs. Growth in the economy and technological accomplishments are not reflected in a reduction in health inequalities, and India continues to contribute significantly to global child mortality figures. This paper reviews the development of the Indian vaccine industry, policy support for it and its current status. It also highlights opportunities and challenges for the introduction of new and underutilized vaccines at home. Copyright © 2012 Elsevier Ltd. All rights reserved.

Missouri timber industry--an assessment of timber product output and use, 1994.

Treesearch

Ronald J. Piva; Shelby G. Jones

1997-01-01

Discusses recent Missouri forest industry trends; production and receipts of industrial roundwood; and production of saw logs, veneer logs, cooperage bolts, charcoal, and other products in 1994. Compares findings with those from earlier surveys. Reports on the quantity, type, and disposition of wood and bark residues generated by the primary wood-using industry.

76 FR 27872 - Airworthiness Directives; PIAGGIO AERO INDUSTRIES S.p.A Model P-180 Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-13

... Airworthiness Directives; PIAGGIO AERO INDUSTRIES S.p.A Model P- 180 Airplanes AGENCY: Federal Aviation.... This emergency AD was sent previously to all known U.S. owners and operators of PIAGGIO AERO INDUSTRIES... loss of control of the aeroplane. Since these AD actions were taken, Piaggio Aero Industries, the type...

Analysis of Government Policies to Support Sustainable Domestic Defense Industries

DTIC Science & Technology

2015-06-01

arms- industry. Syrian civil war . n.d. Retrieved June 10, 2015, from http://www.britannica.com/event/Syrian-Civil- War United Nations Commission on...perhaps the most significant variable is the government. Because governments are both buyers and suppliers of national security, government policies...are both buyers and suppliers of national security, government policies are often designed by governments to support and regulate their domestic

Developing a maximum energy efficiency improvement target for SIC 28: chemicals and allied products. Volume 3. Draft target and support document. Appendices. Part 2. [Soaps, cosmetics, detergents, and perfumes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1976-07-01

Part 2 of this appendix contains the detailed supporting documentation and rationale for the energy efficiency improvement goals for each of the component industries in Standard Industrial Classification (SIC) 284 which includes soap, detergents and cleaning preparations, and cosmetics, perfumes and other toilet preparations.

Federal Research and Development Contract Trends and the Supporting Industrial Base, 2000-2014

DTIC Science & Technology

2016-04-30

Homeland Security, and government-wide services contracting trends; sourcing policy and cost estimation methodologies; and recent U.S. Army modernization ...been fears that the sharp downturn in federal contract obligations would disproportionately impact the R&D contracting portfolios within individual...329 - contracting portfolios , and the industrial base that supports those efforts, within each R&D contracting agency. The main finding of this

Estimation of Critical Population Support Requirements.

DTIC Science & Technology

1984-05-30

VA 22160 W.U. 4921H 11. CONTROLLING OFFICE NAME AND ADDRESS 12. REPORT DATE Federal Emergency Management Agency May 30, 1984 Industrial Protection...ensure the availability of industrial production required to support the population, maintain defense capabilities and perform command and control ...the population, maintain national defense capabilities and perform command and control activi- ties during a national emergency such as a threat of a

Employer-Based Programs to Support Breastfeeding Among Working Mothers: A Systematic Review.

PubMed

Dinour, Lauren M; Szaro, Jacalyn M

2017-04-01

Many mothers experience barriers to maintaining a breastfeeding relationship with their infants upon returning to work and, consequently, terminate breastfeeding earlier than recommended or intended. As such, employers are in a unique position to help further increase breastfeeding rates, durations, and exclusivity. The purpose of this review is to examine the literature regarding employer-based programs, policies, and interventions to support breastfeeding among working mothers. A systematic literature search was conducted for peer-reviewed articles published before April 2016. Studies were included if they focused on workplace-based lactation/breastfeeding support programs, policies, or interventions to promote breastfeeding among employees. For inclusion, articles must have measured at least one outcome, such as breastfeeding duration, breastfeeding exclusivity, or employee satisfaction. Twenty-two articles were included, representing 10 different countries and both public- and private-sector employers, including governmental offices, schools, hospitals, manufacturing/industrial companies, and financial settings, among others. Providing a lactation space was the most common employer-based support accommodation studied, followed by breastfeeding breaks and comprehensive lactation support programs. The majority of studies analyzing these three support types found at least one positive breastfeeding and/or nonbreastfeeding outcome. This review suggests that maintaining breastfeeding while working is not only possible but also more likely when employers provide the supports that women need to do so. Although some employers may have more extensive breastfeeding support policies and practices than others, all employers can implement a breastfeeding support program that fits their company's budget and resources.

Understanding and controlling the structure and segregation behaviour of AuRh nanocatalysts

PubMed Central

Piccolo, Laurent; Li, Z. Y.; Demiroglu, Ilker; Moyon, Florian; Konuspayeva, Zere; Berhault, Gilles; Afanasiev, Pavel; Lefebvre, Williams; Yuan, Jun; Johnston, Roy L.

2016-01-01

Heterogeneous catalysis, which is widely used in the chemical industry, makes a great use of supported late-transition-metal nanoparticles, and bimetallic catalysts often show superior catalytic performances as compared to their single metal counterparts. In order to optimize catalyst efficiency and discover new active combinations, an atomic-level understanding and control of the catalyst structure is desirable. In this work, the structure of catalytically active AuRh bimetallic nanoparticles prepared by colloidal methods and immobilized on rutile titania nanorods was investigated using aberration-corrected scanning transmission electron microscopy. Depending on the applied post-treatment, different types of segregation behaviours were evidenced, ranging from Rh core – Au shell to Janus via Rh ball – Au cup configuration. The stability of these structures was predicted by performing density-functional-theory calculations on unsupported and titania-supported Au-Rh clusters; it can be rationalized from the lower surface and cohesion energies of Au with respect to Rh, and the preferential binding of Rh with the titania support. The bulk-immiscible AuRh/TiO2 system can serve as a model to understand similar supported nanoalloy systems and their synergistic behaviour in catalysis. PMID:27739480

Accident patterns for construction-related workers: a cluster analysis

NASA Astrophysics Data System (ADS)

Liao, Chia-Wen; Tyan, Yaw-Yauan

2012-01-01

The construction industry has been identified as one of the most hazardous industries. The risk of constructionrelated workers is far greater than that in a manufacturing based industry. However, some steps can be taken to reduce worker risk through effective injury prevention strategies. In this article, k-means clustering methodology is employed in specifying the factors related to different worker types and in identifying the patterns of industrial occupational accidents. Accident reports during the period 1998 to 2008 are extracted from case reports of the Northern Region Inspection Office of the Council of Labor Affairs of Taiwan. The results show that the cluster analysis can indicate some patterns of occupational injuries in the construction industry. Inspection plans should be proposed according to the type of construction-related workers. The findings provide a direction for more effective inspection strategies and injury prevention programs.

Accident patterns for construction-related workers: a cluster analysis

NASA Astrophysics Data System (ADS)

Liao, Chia-Wen; Tyan, Yaw-Yauan

2011-12-01

The construction industry has been identified as one of the most hazardous industries. The risk of constructionrelated workers is far greater than that in a manufacturing based industry. However, some steps can be taken to reduce worker risk through effective injury prevention strategies. In this article, k-means clustering methodology is employed in specifying the factors related to different worker types and in identifying the patterns of industrial occupational accidents. Accident reports during the period 1998 to 2008 are extracted from case reports of the Northern Region Inspection Office of the Council of Labor Affairs of Taiwan. The results show that the cluster analysis can indicate some patterns of occupational injuries in the construction industry. Inspection plans should be proposed according to the type of construction-related workers. The findings provide a direction for more effective inspection strategies and injury prevention programs.

Occupational health services in South Carolina manufacturing plants: results of a survey.

PubMed Central

Chovil, A C; Alexander, G R; Gibson, J J; Altekruse, J M

1983-01-01

A mailed survey of occupational health and safety practices in industrial manufacturing plants with more than 50 employees was carried out in South Carolina, with a response rate of 60 percent. The responding plants represented 73 percent of the total workforce in the industries. Data were analyzed in relation to the types of industry as delineated by the Standard Industrial Code. Eighty-three percent of the responding plants (a percentage that represented more than 92 percent of the total workforce in the industries) had some arrangements for the medical or nursing care of employees. For the study, occupational health services were defined at three levels: basic (mandatory), secondary (beneficial to management), and tertiary (health promotion-preventive medicine). The basic services provided by most of the industries surveyed appeared to be adequate. Secondary services were well developed except in the apparel and lumber industries. Tertiary services, in terms of five selected preventive programs, were moderately developed only in the paper, petroleum, and chemical industries. Only alcohol abuse control programs were commonly offered in the other types of industry. The size of the workforce in a plant partly dictated the level of occupational health services it offered but did not always account for all inter-industry variation. PMID:6419275

Occupational health services in South Carolina manufacturing plants: results of a survey.

PubMed

Chovil, A C; Alexander, G R; Gibson, J J; Altekruse, J M

1983-01-01

A mailed survey of occupational health and safety practices in industrial manufacturing plants with more than 50 employees was carried out in South Carolina, with a response rate of 60 percent. The responding plants represented 73 percent of the total workforce in the industries. Data were analyzed in relation to the types of industry as delineated by the Standard Industrial Code. Eighty-three percent of the responding plants (a percentage that represented more than 92 percent of the total workforce in the industries) had some arrangements for the medical or nursing care of employees. For the study, occupational health services were defined at three levels: basic (mandatory), secondary (beneficial to management), and tertiary (health promotion-preventive medicine). The basic services provided by most of the industries surveyed appeared to be adequate. Secondary services were well developed except in the apparel and lumber industries. Tertiary services, in terms of five selected preventive programs, were moderately developed only in the paper, petroleum, and chemical industries. Only alcohol abuse control programs were commonly offered in the other types of industry. The size of the workforce in a plant partly dictated the level of occupational health services it offered but did not always account for all inter-industry variation.

Worker satisfaction with personal flotation devices (PFDs) in the fishing industry: evaluations in actual use.

PubMed

Lucas, Devin; Lincoln, Jennifer; Somervell, Philip; Teske, Theodore

2012-07-01

The purpose of this study was to determine which type of commercially available PFD resulted in the highest satisfaction among workers in the fishing industry. Fishing industry workers on four types of vessels wore and evaluated six different PFDs during their fishing seasons. Linear regression was used to test the differences in mean satisfaction scores, adjusting for clustered observations on vessels. The data were stratified by vessel type to determine the differences in PFD satisfaction within each vessel type. PFD D had the highest mean satisfaction score, but satisfaction with particular PFDs varied depending on the vessel type. Although the common objections by workers to wearing PFDs are that they are bulky and uncomfortable, some of the PFDs that were evaluated in this study received high scores for comfort and satisfaction. Given the availability of PFDs that are comfortable to wear while working, fishing vessel owners and operators should consider implementing policies mandating the use of PFDs on deck. Published by Elsevier Ltd.

Decision Support for Environmental Management of Industrial Non-Hazardous Secondary Materials: New Analytical Methods Combined with Simulation and Optimization Modeling

EPA Science Inventory

Non-hazardous solid materials from industrial processes, once regarded as waste and disposed in landfills, offer numerous environmental and economic advantages when put to beneficial uses (BUs). Proper management of these industrial non-hazardous secondary materials (INSM) requir...

Role of Space Station: The how of space industrialization

NASA Technical Reports Server (NTRS)

Marshall, W. R.

1984-01-01

The roles of the Space Station, as an R&D facility, as part of an industrial system which support space industralization, and as a transportation node for space operations are considered. Industrial opportunities relative to these roles are identified and space station concepts responsive to these roles are discussed.

Saving Energy in Industrial Companies: Case Studies of Energy Efficiency Programs in Large U.S. Industrial Corporations and the Role of Ratepayer-Funded Support

DOE Office of Scientific and Technical Information (OSTI.GOV)

None, None

This paper is designed for companies looking to cut costs through energy savings, ratepayer-funded program administrators interested in increasing large industrial company participation in energy efficiency program offerings, and state utility commissions.

Critical Success Factors for Knowledge Transfer Collaborations between University and Industry

ERIC Educational Resources Information Center

Schofield, Tatiana

2013-01-01

In a fast moving business environment university-industry collaborations play a critical role in contributing to national economies and furthering a competitive advantage. Knowledge transfer from university to industry is supported by national governments as part of their innovation, national growth and competitiveness agenda. A…

77 FR 7166 - Draft Guidance for Industry on Determining the Extent of Safety Data Collection Needed in Late...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-10

... clinical investigations in determining the amounts and types of safety data to collect in trials conducted... types of safety data that should be collected during late-stage premarket and postmarket clinical...] Draft Guidance for Industry on Determining the Extent of Safety Data Collection Needed in Late Stage...

The Garment Industry Development Corporation: A Case Study of a Sectoral Employment Development Approach. Sectoral Employment Development Learning Project Case Studies Series.

ERIC Educational Resources Information Center

Conway, Maureen

The Garment Industry Development Corporation (GIDC) was founded in 1984 by a 3-member partnership that included the local union, industry associations, and local government. GIDC's goal was to support New York City's garment industry, which had been steadily losing jobs. GIDC exhibits the following characteristics of sectoral initiatives: it…

Private Industry Support to Defense Needs.

DTIC Science & Technology

1982-04-19

especially private industry, must fully understand that defense procurement is changing drastically and it will no longer be looking for all its...products on the leading edge of technology. The price in time and money dictates this changed procure - ment strategy immediately. Private industry would...A process to stablize procurements and breakdown the barriers that are stopping new firms from entering into defense business; private industry

Cooperative Science: A National Study of University and Industry Researchers. Assessment of the Industry/University Cooperative Research Projects Program (IUCR). Volume I.

ERIC Educational Resources Information Center

Johnson, Elmima C.; Tornatzky, Louis G.

This report presents data from a national study of 118 Industry/University Cooperative Research (IUCR) projects supported by the National Science Foundation. Questionnaire responses were gathered from 226 industry and university scientists working on these projects. The purpose of the study was to describe how IUCR projects develop, how they are…

Energy efficient industrialized housing research program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Berg, R.; Brown, G.Z.; Finrow, J.

1989-01-01

This is the second volume of a two volume report on energy efficient industrialized housing. Volume II contains support documentation for Volume I. The following items are included: individual trip reports; software bibliography; industry contacts in the US, Denmark, and Japan; Cost comparison of industrialized housing in the US and Denmark; draft of the final report on the systems analysis for Fleetwood Mobile Home Manufacturers. (SM)

Creating Pathways to Employment: The Role of Industry Partnerships in Preparing Low-Income Youth and Young Adults for Careers in High-Demand Industries

ERIC Educational Resources Information Center

Grobe, Terry; Martin, Nancy; Steinberg, Adria

2015-01-01

The National Fund for Workforce Solutions and Jobs for the Future, with support from the Rockefeller Foundation, launched the Youth/Industry Partnership Initiative (YIPI), to learn how employer-led industry partnerships could addressing the crisis of youth unemployment--7 percent of American youth (age 16-24) are neither in school or…

Moving research to patient applications through commercialization: understanding and evaluating the role of intellectual property.

PubMed

Patino, Robert M

2010-03-01

The advancement of research from discovery to the delivery of medical care can be limited without the support of industry to sponsor its continued development. Federal government financial support is generally crucial in early-stage development through funding from the NIH, National Science Foundation, and other federal agencies; however, government support generally stops shortly after basic research discoveries have been reported. Much of the cessation of financial support derives from the government's regulatory responsibilities, as sponsoring the commercialization of a product conflicts with regulation of the approval for clinical use of a drug or device. Furthermore, differences in goals, resources, and flexibility render government, as compared with private industry, inefficient and less responsive to market demands with regard to stream-lining the development of and enhancing the quality of products and services offered. Thus, industry and private investment provide the bridge that converts new discoveries into healthcare products that are available to consumers and patients. This conversion occurs through commercialization, which involves both high risks and high rewards. Taking advantage of the commercialization option for research development requires an understanding of the technology transfer process. This article reviews 5 topics: 1) industry motivation to invest in academic research; 2) institutional considerations in partnering with industry; 3) academia's interactions with inventors in the commercialization process; 4) the research institution's route to commercialization, and 5) the role of intellectual property and commercialization in the advancement of healthcare.

Moving Research to Patient Applications through Commercialization: Understanding and Evaluating the Role of Intellectual Property

PubMed Central

2010-01-01

The advancement of research from discovery to the delivery of medical care can be limited without the support of industry to sponsor its continued development. Federal government financial support is generally crucial in early-stage development through funding from the NIH, National Science Foundation, and other federal agencies; however, government support generally stops shortly after basic research discoveries have been reported. Much of the cessation of financial support derives from the government's regulatory responsibilities, as sponsoring the commercialization of a product conflicts with regulation of the approval for clinical use of a drug or device. Furthermore, differences in goals, resources, and flexibility render government, as compared with private industry, inefficient and less responsive to market demands with regard to stream-lining the development of and enhancing the quality of products and services offered. Thus, industry and private investment provide the bridge that converts new discoveries into healthcare products that are available to consumers and patients. This conversion occurs through commercialization, which involves both high risks and high rewards. Taking advantage of the commercialization option for research development requires an understanding of the technology transfer process. This article reviews 5 topics: 1) industry motivation to invest in academic research; 2) institutional considerations in partnering with industry; 3) academia's interactions with inventors in the commercialization process; 4) the research institution's route to commercialization, and 5) the role of intellectual property and commercialization in the advancement of healthcare. PMID:20353687

Space commerce - Preparing for the next century

NASA Technical Reports Server (NTRS)

Stone, Barbara A.

1991-01-01

The role of NASA in space commerce is discussed in terms of providing direct assistance to the private sector and in terms of the most suitable industrial areas for such support. The primary mechanism for such support is the program of Centers for the Commercial Development of Space (CCDS) which selects industrial high-technology projects to help make them viable. The research spans such fields as remote sensing, crop forecasting, and microgravity materials processing. The collaboration of NASA and private industry is discussed in terms of sounding-rocket projects, the Commercial Experiment Transporter, and academic/industrial programs designed to generate enthusiasm for commercial space research. The future of such research is expected to focus on CCDSs for microgravity-developed products, commercial infrastructure, SEI, and commercial use of the Space Station Freedom.

Solar Resource & Meteorological Assessment Project (SOLRMAP): Rotating Shadowband Radiometer (RSR); Kalaeloa Oahu, Hawaii (Data)

DOE Data Explorer

Wilcox, S.; Andreas, A.

2010-03-16

The U.S. Department of Energy's National Renewable Energy Laboratory collaborates with the solar industry to establish high quality solar and meteorological measurements. This Solar Resource and Meteorological Assessment Project (SOLRMAP) provides high quality measurements to support deployment of power projects in the United States. The no-funds-exchanged collaboration brings NREL solar resource assessment expertise together with industry needs for measurements. The end result is high quality data sets to support the financing, design, and monitoring of large scale solar power projects for industry in addition to research-quality data for NREL model development. NREL provides consultation for instrumentation and station deployment, along with instrument calibrations, data acquisition, quality assessment, data distribution, and summary reports. Industry participants provide equipment, infrastructure, and station maintenance.

Solar Resource & Meteorological Assessment Project (SOLRMAP): Rotating Shadowband Radiometer (RSR); Los Angeles, California (Data)

DOE Data Explorer

Stoffel, T.; Andreas, A.

2010-04-26

The U.S. Department of Energy's National Renewable Energy Laboratory collaborates with the solar industry to establish high quality solar and meteorological measurements. This Solar Resource and Meteorological Assessment Project (SOLRMAP) provides high quality measurements to support deployment of power projects in the United States. The no-funds-exchanged collaboration brings NREL solar resource assessment expertise together with industry needs for measurements. The end result is high quality data sets to support the financing, design, and monitoring of large scale solar power projects for industry in addition to research-quality data for NREL model development. NREL provides consultation for instrumentation and station deployment, along with instrument calibrations, data acquisition, quality assessment, data distribution, and summary reports. Industry participants provide equipment, infrastructure, and station maintenance.

Solar Resource & Meteorological Assessment Project (SOLRMAP): Rotating Shadowband Radiometer (RSR); Cedar City, Utah (Data)

DOE Data Explorer

Wilcox, S.; Andreas, A.

2010-07-13

The U.S. Department of Energy's National Renewable Energy Laboratory collaborates with the solar industry to establish high quality solar and meteorological measurements. This Solar Resource and Meteorological Assessment Project (SOLRMAP) provides high quality measurements to support deployment of power projects in the United States. The no-funds-exchanged collaboration brings NREL solar resource assessment expertise together with industry needs for measurements. The end result is high quality data sets to support the financing, design, and monitoring of large scale solar power projects for industry in addition to research-quality data for NREL model development. NREL provides consultation for instrumentation and station deployment, along with instrument calibrations, data acquisition, quality assessment, data distribution, and summary reports. Industry participants provide equipment, infrastructure, and station maintenance.

Solar Resource and Meteorological Assessment Project (SOLRMAP): Rotating Shadowband Radiometer (RSR); Escalante Tri-State - Prewitt, New Mexico (Data)

DOE Data Explorer

Wilcox, S.; Andreas, A.

2012-11-03

The U.S. Department of Energy's National Renewable Energy Laboratory collaborates with the solar industry to establish high quality solar and meteorological measurements. This Solar Resource and Meteorological Assessment Project (SOLRMAP) provides high quality measurements to support deployment of power projects in the United States. The no-funds-exchanged collaboration brings NREL solar resource assessment expertise together with industry needs for measurements. The end result is high quality data sets to support the financing, design, and monitoring of large scale solar power projects for industry in addition to research-quality data for NREL model development. NREL provides consultation for instrumentation and station deployment, along with instrument calibrations, data acquisition, quality assessment, data distribution, and summary reports. Industry participants provide equipment, infrastructure, and station maintenance.

Solar Resource & Meteorological Assessment Project (SOLRMAP): Sun Spot Two; Swink, Colorado (Data)

DOE Data Explorer

Wilcox, S.; Andreas, A.

2010-11-10

The U.S. Department of Energy's National Renewable Energy Laboratory collaborates with the solar industry to establish high quality solar and meteorological measurements. This Solar Resource and Meteorological Assessment Project (SOLRMAP) provides high quality measurements to support deployment of power projects in the United States. The no-funds-exchanged collaboration brings NREL solar resource assessment expertise together with industry needs for measurements. The end result is high quality data sets to support the financing, design, and monitoring of large scale solar power projects for industry in addition to research-quality data for NREL model development. NREL provides consultation for instrumentation and station deployment, along with instrument calibrations, data acquisition, quality assessment, data distribution, and summary reports. Industry participants provide equipment, infrastructure, and station maintenance.

Solar Resource & Meteorological Assessment Project (SOLRMAP): Rotating Shadowband Radiometer (RSR); Milford, Utah (Data)

DOE Data Explorer

Wilcox, S.; Andreas, A.

2010-07-14

The U.S. Department of Energy's National Renewable Energy Laboratory collaborates with the solar industry to establish high quality solar and meteorological measurements. This Solar Resource and Meteorological Assessment Project (SOLRMAP) provides high quality measurements to support deployment of power projects in the United States. The no-funds-exchanged collaboration brings NREL solar resource assessment expertise together with industry needs for measurements. The end result is high quality data sets to support the financing, design, and monitoring of large scale solar power projects for industry in addition to research-quality data for NREL model development. NREL provides consultation for instrumentation and station deployment, along with instrument calibrations, data acquisition, quality assessment, data distribution, and summary reports. Industry participants provide equipment, infrastructure, and station maintenance.

Solar Resource & Meteorological Assessment Project (SOLRMAP): Rotating Shadowband Radiometer (RSR); La Ola Lanai, Hawaii (Data)

DOE Data Explorer

Wilcox, S.; Andreas, A.

2009-07-22

The U.S. Department of Energy's National Renewable Energy Laboratory collaborates with the solar industry to establish high quality solar and meteorological measurements. This Solar Resource and Meteorological Assessment Project (SOLRMAP) provides high quality measurements to support deployment of power projects in the United States. The no-funds-exchanged collaboration brings NREL solar resource assessment expertise together with industry needs for measurements. The end result is high quality data sets to support the financing, design, and monitoring of large scale solar power projects for industry in addition to research-quality data for NREL model development. NREL provides consultation for instrumentation and station deployment, along with instrument calibrations, data acquisition, quality assessment, data distribution, and summary reports. Industry participants provide equipment, infrastructure, and station maintenance.

Solar Resource & Meteorological Assessment Project (SOLRMAP): Observed Atmospheric and Solar Information System (OASIS); Tucson, Arizona (Data)

DOE Data Explorer

Wilcox, S.; Andreas, A.

2010-11-03

The U.S. Department of Energy's National Renewable Energy Laboratory collaborates with the solar industry to establish high quality solar and meteorological measurements. This Solar Resource and Meteorological Assessment Project (SOLRMAP) provides high quality measurements to support deployment of power projects in the United States. The no-funds-exchanged collaboration brings NREL solar resource assessment expertise together with industry needs for measurements. The end result is high quality data sets to support the financing, design, and monitoring of large scale solar power projects for industry in addition to research-quality data for NREL model development. NREL provides consultation for instrumentation and station deployment, along with instrument calibrations, data acquisition, quality assessment, data distribution, and summary reports. Industry participants provide equipment, infrastructure, and station maintenance.

Building alliances in unlikely places: progressive allies and the Tobacco Institute's coalition strategy on cigarette excise taxes.

PubMed

Campbell, Richard B; Balbach, Edith D

2009-07-01

The tobacco industry often utilizes third parties to advance its policy agenda. One such utilization occurred when the industry identified organized labor and progressive groups as potential allies whose advocacy could undermine public support for excise tax increases. To attract such collaboration, the industry framed the issue as one of tax fairness, creating a labor management committee to provide distance from tobacco companies and furthering progressive allies' interests through financial and logistical support. Internal industry documents indicate that this strategic use of ideas, institutions, and interests facilitated the recruitment of leading progressive organizations as allies. By placing excise taxes within a strategic policy nexus that promotes mutual public interest goals, public health advocates may use a similar strategy in forging their own excise tax coalitions.

Atmospheric Science and the CFC Industry

NASA Astrophysics Data System (ADS)

Steed, J. M.

2012-12-01

Industry involvement with developing atmospheric science and subsequent regulations to protect ozone was unusual. Chlorofluorocarbon manufacturers were research-based businesses accustomed to understanding the science behind product-related issues. When Lovelock's measurements in 1971 implied most of the cumulative production of CFCs remained in the atmosphere, global CFC producers funded academic research to identify natural sinks for the materials. The Fluorocarbon Program Panel (FPP) began in 1972, but changed focus to atmospheric photochemistry following Rowland and Molina's work in 1974. Despite early vociferous opposition, especially by the CFC-using aerosol industry, to any regulations, leaders among the producers worked to build their scientific understanding, expanding FPP funding and launching internal work in modeling and ozone trend analysis. The key first question for industry was not how much depletion might occur, but whether it would occur at all. If so, regardless of the amount, regulations and a major transition would be required in CFC-using industries, and the response would need to be global and prompt. So long as that basic question was in doubt, some businesses and countries would resist the economic cost of action. In the meantime, the producing industry worked to identify potential alternatives and to communicate atmospheric science to the downstream industries. Although the industry science effort was often disparaged as an attack on "real" science, my only assignment when I joined DuPont's Central Research Department in 1979 was to understand and contribute to the science, keeping both the company and our customers informed. Our modeling results were published freely. FPP funding led to better knowledge of the ClO + O rate constant, significantly increasing depletion in model calculations; supported the development of the techniques used to measure in situ atmospheric ClO, so important in later strengthening the case for chlorine-catalyzed depletion; and supported international participation in several global collaborations led by NASA. By the mid-1980s, the combination of renewed growth in global production and modelers' unanimity that depletion eventually would occur in any scenario of sustained growth led most of the industry to support actively the UN-led international negotiations. Knowing that any limit to global growth would eventually stimulate development of replacements, broad agreement was far more important than any specific target for limiting growth. The Montreal Protocol achieved that agreement, and support from the broad US industry coalition in the Alliance for Responsible CFC Policy was instrumental in its approval by the Reagan administration. Just as Rowland's work in 1974 had driven the industry to understand and contribute to atmospheric science, his participation in the ozone trends panel results announced in March, 1988 led to another shift. The combination of solid links between CFCs and stratospheric chlorine, between chlorine and ozone depletion, at least at the poles, and the likely presence of depletion at mid-latitudes, whether or not caused by chlorine, led DuPont to announce a week later a complete phaseout of CFCs. Broader industry support followed, culminating what is still the best example of government, industry, scientific, and environmentalist collaboration on a global scale.

1992 NASA Life Support Systems Analysis workshop

NASA Technical Reports Server (NTRS)

Evanich, Peggy L.; Crabb, Thomas M.; Gartrell, Charles F.

1992-01-01

The 1992 Life Support Systems Analysis Workshop was sponsored by NASA's Office of Aeronautics and Space Technology (OAST) to integrate the inputs from, disseminate information to, and foster communication among NASA, industry, and academic specialists. The workshop continued discussion and definition of key issues identified in the 1991 workshop, including: (1) modeling and experimental validation; (2) definition of systems analysis evaluation criteria; (3) integration of modeling at multiple levels; and (4) assessment of process control modeling approaches. Through both the 1991 and 1992 workshops, NASA has continued to seek input from industry and university chemical process modeling and analysis experts, and to introduce and apply new systems analysis approaches to life support systems. The workshop included technical presentations, discussions, and interactive planning, with sufficient time allocated for discussion of both technology status and technology development recommendations. Key personnel currently involved with life support technology developments from NASA, industry, and academia provided input to the status and priorities of current and future systems analysis methods and requirements.

'Who's who' in two different flower types of Calluna vulgaris (Ericaceae): morphological and molecular analyses of flower organ identity

PubMed Central

2009-01-01

Background The ornamental crop Calluna vulgaris is of increasing importance to the horticultural industry in the northern hemisphere due to a flower organ mutation: the flowers of the 'bud-flowering' phenotype remain closed i.e. as buds throughout the total flowering period and thereby maintain more colorful flowers for a longer period of time than the wild-type. This feature is accompanied and presumably caused by the complete lack of stamens. Descriptions of this botanical particularity are inconsistent and partially conflicting. In order to clarify basic questions of flower organ identity in general and stamen loss in detail, a study of the wild-type and the 'bud-flowering' flower type of C. vulgaris was initiated. Results Flowers were examined by macro- and microscopic techniques. Organ development was investigated comparatively in both the wild-type and the 'bud-flowering' type by histological analyses. Analysis of epidermal cell surface structure of vegetative tissues and perianth organs using scanning electron microscopy revealed that in wild-type flowers the outer whorls of colored organs may be identified as sepals, while the inner ones may be identified as petals. In the 'bud-flowering' type, two whorls of sepals are directly followed by the gynoecium. Both, petals and stamens, are completely missing in this flower type. The uppermost whorl of green leaves represents bracts in both flower types. In addition, two MADS-box genes (homologs of AP3/DEF and SEP1/2) were identified in C. vulgaris using RACE-PCR. Expression analysis by qRT-PCR was conducted for both genes in leaves, bracts, sepals and petals. These experiments revealed an expression pattern supporting the organ classification based on morphological characteristics. Conclusions Organ identity in both wild-type and 'bud-flowering' C. vulgaris was clarified using a combination of microscopic and molecular methods. Our results for bract, sepal and petal organ identity are supported by the 'ABCDE model'. However, loss of stamens in the 'bud-flowering' phenotype is an exceptional flower organ modification that cannot be explained by modified spatial expression of known organ identity genes. PMID:20003430

Modelling healthcare systems with phase-type distributions.

PubMed

Fackrell, Mark

2009-03-01

Phase-type distributions constitute a very versatile class of distributions. They have been used in a wide range of stochastic modelling applications in areas as diverse as telecommunications, finance, biostatistics, queueing theory, drug kinetics, and survival analysis. Their use in modelling systems in the healthcare industry, however, has so far been limited. In this paper we introduce phase-type distributions, give a survey of where they have been used in the healthcare industry, and propose some ideas on how they could be further utilized.

Authors' financial relationships with the food and beverage industry and their published positions on the fat substitute olestra.

PubMed

Levine, Jane; Gussow, Joan Dye; Hastings, Diane; Eccher, Amy

2003-04-01

This study examined the association between authors' published positions on the safety and efficacy in assisting with weight loss of the Procter & Gamble (P&G) fat substitute olestra and their financial relationships with the food and beverage industry. Journal articles about olestra, and their authors, were classified as supportive, critical, or neutral with respect to its use. Authors not known to have industry affiliations were surveyed about their financial relationships. Supportive authors were significantly more likely than critical or neutral authors to have financial relationships with P&G (80% vs 11% and 21%, respectively; P <.0001). All authors disclosing an affiliation with P&G were supportive. Because authors' published opinions were associated with their financial relationships, obtaining noncommercial funding may be more essential to maintaining objectivity than disclosing personal financial interests.

Referral bias in hospital register studies of geographical and industrial differences in health.

PubMed

Soll-Johanning, Helle; Hannerz, Harald; Tüchsen, Finn

2004-05-01

The Danish National Hospital Register contains four patient types: full-time inpatients, part-time inpatients, outpatients and emergency ward patients. The aim of the present study was to investigate whether results from comparative hospital register studies depend on which patient types we choose to include in the analysis. The hospital register was linked to the centralised civil register and the employment classification module. All economically active persons in Denmark aged 20-59 years 1st January 1995 (N = 2,281,480) were followed for six years. We calculated SIRs, first by county then by industry and finally by industry adjusted for county, for a variety of diagnostic groups and for each of the following types of cases: A) full-time inpatients, B) all inpatients, C) all inpatients and outpatients, D) all patients. The ratio between the maximum and the minimum of the four types of SIRs was calculated for each combination of the examined population groups and diseases. A max/min ratio was regarded as a sign of referral bias if it was above 1.2 and statistically significant. When calculating SIRs by county 46.7 percent of the max/min ratios signified referral bias. The percentage was 5.5 when calculating SIRs by industry and only 1.7 when they were calculated by industry adjusted for county. Estimates of geographical health differences are often distorted by differences in the health care organisation. Estimates of industrial health differences tend to be robust with a few identifiable exceptions. Standardisation for county will eliminate bias.

76 FR 77375 - Airworthiness Directives; Apical Industries, Inc., (Apical) Emergency Float Kits

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-13

... Airworthiness Directives; Apical Industries, Inc., (Apical) Emergency Float Kits AGENCY: Federal Aviation... the Apical emergency float kits installed on certain model helicopters under supplemental type... the service information identified in this AD from Apical Industries, Inc., 2608 Temple Heights Drive...

Type III Polyketide Synthases: Discovery, Characterization, and Engineering

ERIC Educational Resources Information Center

Pitel, Sheryl Beth Rubin

2009-01-01

The polyketides are a diverse group of natural products with important applications in medicine and industry. Industry, especially the pharmaceutical industry, is under pressure to deliver "greener" chemical syntheses that are less environmentally damaging and incorporate renewable resources. There exists potential to replace current…

15 CFR 801.10 - Rules and regulations for the BE-120, Benchmark Survey of Transactions in Selected Services and...

Code of Federal Regulations, 2012 CFR

2012-01-01

... engineering services; industrial-type maintenance, installation, alteration, and training services; legal... services; (17) Financial services (purchases only); (18) Industrial engineering services; (19) Industrial...; educational and training services; engineering, architectural, and surveying services; financial services...

Survey of industrial dryers for solids

DOE Office of Scientific and Technical Information (OSTI.GOV)

Richardson, A.S.; Jensen, W.P.

1976-07-01

A study was directed toward obtaining data for an estimate of the current and anticipated energy demand for industrial drying operations for solid materials. Twenty-seven dryer types, including those utilizing both direct and indirect heat sources, were identified and are described. Results of an analysis made on 17 dryer types and based on data obtained from several of the largest solids dryer manufacturers indicate that industrial dryers for solids currently consume about 1.3 x 10/sup 18/ J (1.2 quads) of energy. This represents nearly 4 percent of the total United States industrial energy use. Several examples of steps being takenmore » by industry to reduce energy requirements for solids drying are included. Still further action to reduce energy consumption of dryers is possible; implementation will depend upon the extent to which incentives are provided by fuel scarcity, fuel costs, and the perfection of new technology by industry alone and in programs with the Federal Government.« less

Woodcock singing-ground counts and habitat changes in the northeastern United States

USGS Publications Warehouse

Dwyer, T.J.; McAuley, D.G.; Derleth, E.L.

1983-01-01

Aerial photography from the late 1960's and the late 1970's was used to study habitat changes along 78 American woodcock (Scolopax minor) singing-ground routes in 9 northeastern states. The most noticeable changes were declines in the amount of abandoned field, cropland, shrubland, and field/pasture. The amount of land in the urban/industrial type increased 33.4% from the late 1960's to the late 1970's. We examined relationships between the woodcock call-count index and habitat variables using multiple-regression techniques. The abundance of calling male woodcock was positively correlated with the amount of abandoned field and alder (Alnus sp.) and negatively correlated with the amount of urban/industrial type. However, only the change in the urban/industrial type was significantly (P < 0.05) related to the change in the call-count index. Urban/industrial area increased, whereas the call-count index declined on average in our sample of routes by 1.4 birds/route (40.5%).

The potential for effluent trading in the energy industries.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Veil, J. A.; Environmental Assessment

1998-01-01

In January 1996, the US Environmental Protection Agency (EPA) released a policy statement endorsing wastewater effluent trading in watersheds, hoping to promote additional interest in the subject. The policy describes five types of effluent trades: point source/point source, point source/nonpoint source, pretreatment, intraplant and nonpoint source/nonpoint source. This paper evaluates the feasibility of implementing these types of effluent trading for facilities in the oil and gas, electric power and coal industries. This paper finds that the potential for effluent trading in these industries is limited because trades would generally need to involve toxic pollutants, which can only be traded undermore » a narrow range of circumstances. However, good potential exists for other types of water-related trades that do not directly involve effluents (e.g. wetlands mitigation banking and voluntary environmental projects). The potential for effluent trading in the energy industries and in other sectors would be enhanced if Congress amended the Clean Water Act (CWA) to formally authorize such trading.« less

78 FR 13397 - Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-27

... industry members from conducting certain types of sponsorships, advertisings, promotions, etc. Affected... Reports from Industry Members Regarding Information on Sponsorships, Advertisements, Promotions, etc...

Relationship between urban eco-environment and competitiveness with the background of globalization: statistical explanation based on industry type newly classified with environment demand and environment pressure.

PubMed

Kang, Xiao-guang; Ma, Qing-Bin

2005-01-01

Within the global urban system, the statistical relationship between urban eco-environment (UE) and urban competitiveness (UC) (RUEC) is researched. Data showed that there is a statistically inverted-U relationship between UE and UC. Eco-environmental factor is put into the classification of industries, and gets six industrial types by two indexes viz. industries' eco-environmental demand and pressure. The statistical results showed that there is a strong relationship, for new industrial classification, between the changes of industrial structure and evolvement of UE. The drive mechanism of the evolvement of urban eco-environment, with human demand and global work division was analyzed. The conclusion is that the development stratege, industrial policies of cities, and environmental policies fo cities must be fit with their ranks among the global urban system. At the era of globalization, so far as the environmental policies, their rationality could not be assessed with the level of strictness, but it can enhance cities' competitiveness when they are fit with cities' capabilities to attract and control some sections of the industry's value-chain. None but these kinds of environmental policies can probably enhance the UC.

Mask industry assessment trend analysis: 2010

NASA Astrophysics Data System (ADS)

Hughes, Greg; Yun, Henry

2010-05-01

Microelectronics industry leaders consistently cite the cost and cycle time of mask technology and mask supply as top critical issues. A survey was designed with input from semiconductor company mask technologists and merchant mask suppliers and support from SEMATECH to gather information about the mask industry as an objective assessment of its overall condition. This year's assessment was the eighth in the current series of annual reports. Its data were presented in detail at BACUS, and the detailed trend analysis is presented at EMLC. With continued industry support, the report can be used as a baseline to gain perspective on the technical and business status of the mask and microelectronics industries. The report will continue to serve as a valuable reference to identify the strengths and opportunities of the mask industry. Its results will be used to guide future investments on critical path issues. This year's survey is basically the same as the surveys in 2005 through 2009. Questions are grouped into six categories: General Business Profile Information, Data Processing, Yields and Yield Loss Mechanisms, Delivery Times, Returns, and Services. Within each category is a multitude of questions that creates a detailed profile of both the business and technical status of the critical mask industry.

[From the design of use study to the assessment of the benefit: with or without pharmaceutical industry?].

PubMed

Porzsolt, Franz

2010-12-01

The financing of clinical studies by the pharmaceutical industry is a controversial topic both internationally and in here in Germany. The well-known unacceptable shortcomings require no further confirmation. It is, however, indisputable that the pharmaceutical industry and medical science are co-dependent. Neither the marketing of industrial products nor the research and education of clinical scientists could function without this cooperation. Therefore, all partners need suggestions concerning goal orientation and consensus. The aim of this discussion is to formulate just such suggestions. To structure this discussion, we have raised the following questions: Must we always be suspicious of the results of studies financed by the pharmaceutical industry? We have to keep in mind that in Germany all clinical trials leading to approval of a drug were supported by the industry. What, exactly, do we want to achieve with our explicit and often justified criticism of these studies? What should be done to achieve a higher validity of the published data if we avoid answering the decisive question of whether we accept the challenge of continuing to let research and teaching be financed by the pharmaceutical industry or reject this kind of cooperation and support altogether.

The Ecuadorean Army, Security and Development in the 90s.

DTIC Science & Technology

1992-03-26

Ecuador through its support for education, agriculture, health care and its participation in industry. It analyzes both internal and external threats to... Ecuador through its support for education, agriculture, health care and its participation in industry. It analyzes both internal and external threats...and internal threats. BACKGROUND Ecuador is situated in the northwest sector of South America and despite being one of the smaller countries in the

Improving Performance Of Industrial Enterprises With CGT

NASA Astrophysics Data System (ADS)

Dolgih, I. N.; Bannova, K. A.; Kuzmina, N. A.; Zdanova, A. B.

2016-04-01

At the present day, a falling in the overall level of efficiency production activities, especially in the machine-building companies makes it necessary to development various actions in the State support, including through the creation consolidated taxation system. Such support will help improve efficiency of activity not only the industrial companies, but also will allow improve economic and social situation in regions where often large engineering factories is city-forming.

Creating Pathways to Employment: The Role of Youth/industry Partnerships in Preparing Low-Income Youth and Young Adults for Careers in High-Demand Industries. Executive Summary

ERIC Educational Resources Information Center

Grobe, Terry; Martin, Nancy; Steinberg, Adria

2015-01-01

The National Fund for Workforce Solutions and Jobs for the Future, with support from the Rockefeller Foundation, launched the Youth/Industry Partnership Initiative (YIPI), to learn how employer-led industry partnerships could addressing the crisis of youth unemployment--7 percent of American youth (age 16-24) are neither in school or…

Mask industry assessment: 2009

NASA Astrophysics Data System (ADS)

Hughes, Greg; Yun, Henry

2009-10-01

Microelectronics industry leaders routinely name the cost and cycle time of mask technology and mask supply as top critical issues. A survey was created with support from SEMATECH and administered by David Powell Consulting to gather information about the mask industry as an objective assessment of its overall condition. The survey is designed with the input of semiconductor company mask technologists and merchant mask suppliers. This year's assessment is the eighth in the current series of annual reports. With ongoing industry support, the report can be used as a baseline to gain perspective on the technical and business status of the mask and microelectronics industries. The report will continue to serve as a valuable reference to identify the strengths and opportunities of the mask industry. The results will be used to guide future investments pertaining to critical path issues. This year's survey is basically the same as the 2005 through 2008 surveys. Questions are grouped into categories: General Business Profile Information, Data Processing, Yields and Yield Loss Mechanisms, Delivery Times, Returns, and Services. Within each category is a multitude of questions that create a detailed profile of both the business and technical status of the critical mask industry. This in combination with the past surveys represents a comprehensive view of changes in the industry.

Paths towards Family-friendly Working Time Arrangements: Comparing Workplaces in Different Countries and Industries.

PubMed

Wiß, Tobias

2017-12-01

Although studies have examined the distribution and conditions of employer-provided work-family arrangements, we still lack a systematic investigation of how these vary for different countries and industries. Based on the European Working Conditions Survey 2010, this study examines the conditions under which firms provide family-friendly working time arrangements and what the differences are across four countries (Austria, Denmark, Italy and the UK) and four industries. The impact of employee representatives, employee involvement, manager support and female managers varies across countries and industries because of the institutional environment (prevailing family model, industrial relations) and workforce composition (gender). The impact of employee representatives depends on their co-determination rights, and the direction of their effect on the prevailing family model (e.g. negative in conservative countries such as Austria) and the gender composition of the workforce (negative in male-dominated production, but positive in services). Employee involvement in the work organization is significantly positive in Austria and Denmark (both with co-operative industrial relations), while manager support has the strongest effect in the UK (liberal regime). At the industry level, female supervisors are positively associated with family-friendly working time arrangements only in the male-dominated production industry. These findings suggest that the effects of agency variables and their direction vary depending on the institutional context.

The Role of the Manufacturer in Air Transportation Planning

NASA Technical Reports Server (NTRS)

Mackenzie, J.

1972-01-01

The role of the aircraft manufacturer in the airline industry is considered. The process is illustrated by using a fictitious airline as an example--that is, a case study approach with Mid-Coast Airways serving as the example. Both in slide form and with supporting papers, a brief history of the airline, a description of its route structure and a forecast based on econometric analysis are presented. Once the forecast rationale is explained, information outlines the requirements for additional aircraft and the application of new aircraft across the system using alternative fleet plan options. The fleet plan is translated into financial summaries which indicate the relative merit of alternative aircraft types or operating plans.

Antecedents and consequences of workplace aggression in the allied health context.

PubMed

Demir, Defne; Rodwell, John; Flower, Rebecca L

2014-01-01

Workplace aggression research has typically focused on groups in the health care industry considered to be high risk (e.g., nursing); however, aggression also occurs among other health care professional groups, such as those in allied health. This study aimed to investigate the antecedents and consequences of workplace aggression among allied health professionals. Allied health professionals working for an Australian health care organization were surveyed, with 134 (49%) responding. The largest group of allied health professionals surveyed were social workers (49%). Job demands, job control, and social support were linked to different types of aggression. Different sources of aggression were linked to various employee outcomes. The importance of considering stressors surrounding employee work conditions is highlighted.

OEM Emergency Preparedness Information

EPA Pesticide Factsheets

The Office of Emergency Management compiles a wide variety of information in support of Emergency Preparedness, including certain elements of the System for Risk Management Plans (SRMP), a wide variety of training and guidance materials, inventories and readiness/O&M status of equipment and response personnel. Some of the data available to EPA for this emergency preparedness includes industry trade secret information.A major component of this data asset is information compiled in the Compendium of Environmental Testing Laboratories. This information allows OEM to direct samples recovered from emergency incidents to the appropriate laboratory certified to analyze the substances in question.Also included here are all types of field readiness information, training logs, and personnel contact information.

Space Technology Mission Directorate Game Changing Development Program FY2015 Annual Program Review: Advanced Manufacturing Technology

NASA Technical Reports Server (NTRS)

Vickers, John; Fikes, John

2015-01-01

The Advance Manufacturing Technology (AMT) Project supports multiple activities within the Administration's National Manufacturing Initiative. A key component of the Initiative is the Advanced Manufacturing National Program Office (AMNPO), which includes participation from all federal agencies involved in U.S. manufacturing. In support of the AMNPO the AMT Project supports building and Growing the National Network for Manufacturing Innovation through a public-private partnership designed to help the industrial community accelerate manufacturing innovation. Integration with other projects/programs and partnerships: STMD (Space Technology Mission Directorate), HEOMD, other Centers; Industry, Academia; OGA's (e.g., DOD, DOE, DOC, USDA, NASA, NSF); Office of Science and Technology Policy, NIST Advanced Manufacturing Program Office; Generate insight within NASA and cross-agency for technology development priorities and investments. Technology Infusion Plan: PC; Potential customer infusion (TDM, HEOMD, SMD, OGA, Industry); Leverage; Collaborate with other Agencies, Industry and Academia; NASA roadmap. Initiatives include: Advanced Near Net Shape Technology Integrally Stiffened Cylinder Process Development (launch vehicles, sounding rockets); Materials Genome; Low Cost Upper Stage-Class Propulsion; Additive Construction with Mobile Emplacement (ACME); National Center for Advanced Manufacturing.

Solar Technology Acceleration Center (SolarTAC): Solar Resource & Meteorological Assessment Project (SOLRAMP)

DOE Data Explorer

Andreas, Afshin; Wilcox, Steve

2016-03-14

Located in Colorado, near Denver International Airport, SolarTAC is a private, member-based, 74-acre outdoor facility where the solar industry tests, validates, and demonstrates advanced solar technologies. SolarTAC was launched in 2008 by a public-private consortium, including Midwest Research Institute (MRI). As a supporting member of SolarTAC, the U.S. Department of Energy National Renewable Energy Laboratory (NMREL) has established a high quality solar and meteorological measurement station at this location. This Solar Resource and Meteorological Assessment Project (SOLRMAP) provides high quality measurements to support deployment of power projects in the United States. The no-funds-exchanged collaboration brings NREL solar resource assessment expertise together with industry needs for measurements. The end result is high quality data sets to support the financing, design, and monitoring of large scale solar powered projects for industry in addition to research-quality data for NREL model development. NREL provides consultation for instrumentation and station deployment, along with instrument calibrations, data acquisition, quality assessment, data distribution, and summary reports. Industry participants provide equipment, infrastructure, and station maintenance.

Academic Faculty in University Research Centers: Neither Capitalism's Slaves nor Teaching Fugitives

ERIC Educational Resources Information Center

Bozeman, Barry; Boardman, Craig

2013-01-01

This study addresses university-industry interactions for both educational and industrial outcomes. The results suggest that while academic faculty who are affiliated with centers are more involved with industry than non-affiliated faculty, affiliates are also more involved with and supportive of students at the undergraduate, graduate, and…

Estimating economic impacts of timber-based industry expansion in northeastern Minnesota.

Treesearch

Daniel L. Erkkila; Dietmar W. Rose; Allen L. Lundgren

1982-01-01

Analysis of current and projected timber supplies in northeastern Minnesota indicates that expanded timber-based industrial activity could be supported. The impacts of a hypothetical industrial development scenario, including construction of waferboard plants and a wood-fueled power plant, were estimated using an input-output model. Development had noticeable impacts...

Membership in CBE's Industry Consortium

Science.gov Websites

Membership Benefits of Membership Membership FAQs Become a Member Board Meeting Logistics CBE's Overview CBE's research program is supported and guided by its Industry Advisory Board (IAB). Twice a year projects, and identify new research topics. Our Industry Advisory Board mirrors the diversity of the

Norwegian Field Research Projects in Industrial Democracy.

ERIC Educational Resources Information Center

Qvale, Thoralf Ulrik

The Industrial Democracy Programme (IDP) of Norway seeks to create conditions for a self-supporting change process in industry, rather than implementing a ready-made model, believing that it is more valuable for employees to learn to change their organization than for the specific solution to be found. The central problems, therefore, have been to…

A dynamic approach to assess international competitiveness of Vietnam's garment and textile industry.

PubMed

Vu, Huong Thanh; Pham, Lam Cat

2016-01-01

Garment and textile (G&T) industry has been playing as a driving force for the socio-economic development of Vietnam. With the international integration process and rising challenges from the global market, there is a need to examine international competitiveness of Vietnam's G&T industry to find out what Vietnam should focus on to enhance its position in the global market place. This paper, by using the Generalized Double Diamond Model (GDDM), analyzed international competitiveness of Vietnam's G&T industry and compared it with China. The results showed that Vietnam was less competitive than China in all four attributes of the GDDM. The lowest competitiveness of Vietnam in comparison with China was Related and Supporting industries, followed by Factor Conditions. Therefore, the paper argued that although Vietnam should improve all of the four attributes in the long term, Vietnam must put a high priority on developing Related and Supporting Industries and then enhance Factor Conditions while maintaining its strengths over China in terms of G&T export growths and favorable business context.

7 CFR 3575.24 - Eligible loan purposes.

Code of Federal Regulations, 2014 CFR

2014-01-01

...) Natural gas distribution systems, (ix) Industrial park sites (but only to the extent of land acquisition... site. Funds may not be used in connection with industrial parks to finance on-site utility systems or business and industrial buildings, and (x) Community parks, community activity centers, and similar types...

5 CFR 532.303 - Specialized industry.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 5 Administrative Personnel 1 2012-01-01 2012-01-01 false Specialized industry. 532.303 Section 532... SYSTEMS Determining Rates for Principal Types of Positions § 532.303 Specialized industry. (a)(1) Under the appropriated fund wage system, a “specialized industry” is a Federal activity engaged in the...

5 CFR 532.303 - Specialized industry.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 5 Administrative Personnel 1 2011-01-01 2011-01-01 false Specialized industry. 532.303 Section 532... SYSTEMS Determining Rates for Principal Types of Positions § 532.303 Specialized industry. (a)(1) Under the appropriated fund wage system, a “specialized industry” is a Federal activity engaged in the...

5 CFR 532.303 - Specialized industry.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 5 Administrative Personnel 1 2013-01-01 2013-01-01 false Specialized industry. 532.303 Section 532... SYSTEMS Determining Rates for Principal Types of Positions § 532.303 Specialized industry. (a)(1) Under the appropriated fund wage system, a “specialized industry” is a Federal activity engaged in the...

5 CFR 532.303 - Specialized industry.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 5 Administrative Personnel 1 2014-01-01 2014-01-01 false Specialized industry. 532.303 Section 532... SYSTEMS Determining Rates for Principal Types of Positions § 532.303 Specialized industry. (a)(1) Under the appropriated fund wage system, a “specialized industry” is a Federal activity engaged in the...

77 FR 42954 - Airworthiness Directives; Boeing Vertol (Type Certificate Currently Held by Columbia Helicopters...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-23

...)) and Kawasaki Heavy Industries, Limited Helicopters (Kawasaki) AGENCY: Federal Aviation Administration... Columbia Helicopters, Inc.) and Kawasaki Heavy Industries, Limited Helicopters: Amendment 39-17124; Docket... Heavy Industries, Limited Model KV107-II and KV107-IIA helicopters with an upper collective pitch...

Heart check: the development and evolution of an organizational heart health assessment.

PubMed

Golaszewski, Thomas; Fisher, Brian

2002-01-01

The purpose of this article is to document the development, testing, and application of an organizational assessment tool used to measure employer support for heart health. Additional information is presented on its future research and applications plan. This article represents the pooling of results from multiple studies using a variety of designs, including pilot tests, cross-sectional analyses, and quasi-experiments. Worksites covering the spectrum of employers across industry types and size, and throughout all of New York State. Over 10,000 New York employees and 1000 New York employers are represented in the multiple phases of this research. Heart Check is a 226-item inventory designed to measure such features in the worksite as organizational foundations, administrative supports, tobacco control, nutrition support, physical activity support, stress management, screening services, and company demographics. Additional side studies used professional judgments and behavioral surveys. As an assessment tool Heart Check shows evidence for reliability and validity. Applications of the instrument show characteristics that define high-scoring companies, quasi standards for New York employers, and, when applied during interventions, positive changes in organizational support levels. A relatively inexpensive, easy-to-use, and metrically tested instrument exists for measuring the construct of organizational support for employee heart health. The instrument shows promise as part of a system to enhance heart health through public health-based interventions in the workplace.

Defense Department's role in advanced technology: a personal perspective

NASA Astrophysics Data System (ADS)

McFarland, Ray I., Jr.

1996-01-01

The Department of Defense is both a developer and user of advanced technology. It does so, not as an end unto itself, but in support of its mission, which is to protect the national security of the country. In part, this is accomplished by 'supporting the warfighter,' and in part, by supporting the national leaders of the country. In accomplishing these ends, a careful balance must be achieved to ensure the Department has the necessary technology to successfully carry out its mission, without the imposition of 'an industrial policy.' Nor can the Department afford the creation of an artificial market, which only it will support, if alternative industrial markets will suffice.

Economic feasibility of solar thermal industrial applications and selected case studies

NASA Astrophysics Data System (ADS)

Montelione, A.; Boyd, D.; Branz, M.

1981-12-01

The economic feasibility is assessed of utilizing solar energy to augment an existing fossil fuel system to generate industrial process heat. Several case studies in the textile and food processing industries in the southern United States were analyzed. Sensitivity analyses were performed, and comparisons illustrating the effects of the Economic Recovery Tax Act of 1981 were made. The economic desirability of the proposed solar systems varied with the type of system selected, location of the facility, state tax credits, and type of fuel displaced. For those systems presently not economical, the projected time to economic feasibility was ascertained.

Status of the lead/acid battery industry in Malaysia

NASA Astrophysics Data System (ADS)

Wong, J.

The Malaysian automotive battery industry has an over-capacity and is experiencing a highly competitive situation in the domestic market. In the medium term, therefore, the industry will concentrate on making advances in battery design and technology, and on improving productivity. The manufacture of industrial batteries is similarly under pressure, particularly from foreign products. At present, it is not feasible to produce locally all the various types of industrial batteries required by the home market.

Space industrialization. Volume 1: Executive summary

NASA Technical Reports Server (NTRS)

1978-01-01

Potential goals for space industrialization were identified, and evolutionary program options for the realization of those goals were developed and assessed. Program support demands were defined, and recommendations were made in relation to program implementation.

Silica-based microcavity fabricated by wet etching

NASA Astrophysics Data System (ADS)

Long, H.; Yang, W.; Ying, L. Y.; Zhang, B. P.

2017-05-01

Not Available Project supported by the Postdoctoral Science Foundation of China (Grant No. 2015M582041) and the Special Project on the Integration of Industry, Education and Research of Aviation Industry Corporation of China.

Passenger bus industry weather information application.

DOT National Transportation Integrated Search

2011-03-21

Adverse weather significantly affects the United States national transportation system, including commercial companies that rely on highways to support their enterprises. The Passenger Bus (Motorcoach) Industry (PBI) is one such affected user whose o...

Solar Resource & Meteorological Assessment Project (SOLRMAP): Southwest Solar Research Park (Formerly SolarCAT) Rotating Shadowband Radiometer (RSR); Phoenix, Arizona (Data)

DOE Data Explorer

Wilcox, S.; Andreas, A.

2010-09-27

The U.S. Department of Energy's National Renewable Energy Laboratory collaborates with the solar industry to establish high quality solar and meteorological measurements. This Solar Resource and Meteorological Assessment Project (SOLRMAP) provides high quality measurements to support deployment of power projects in the United States. The no-funds-exchanged collaboration brings NREL solar resource assessment expertise together with industry needs for measurements. The end result is high quality data sets to support the financing, design, and monitoring of large scale solar power projects for industry in addition to research-quality data for NREL model development. NREL provides consultation for instrumentation and station deployment, along with instrument calibrations, data acquisition, quality assessment, data distribution, and summary reports. Industry participants provide equipment, infrastructure, and station maintenance.

Building Alliances in Unlikely Places: Progressive Allies and the Tobacco Institute's Coalition Strategy on Cigarette Excise Taxes

PubMed Central

Balbach, Edith D.

2009-01-01

The tobacco industry often utilizes third parties to advance its policy agenda. One such utilization occurred when the industry identified organized labor and progressive groups as potential allies whose advocacy could undermine public support for excise tax increases. To attract such collaboration, the industry framed the issue as one of tax fairness, creating a labor management committee to provide distance from tobacco companies and furthering progressive allies' interests through financial and logistical support. Internal industry documents indicate that this strategic use of ideas, institutions, and interests facilitated the recruitment of leading progressive organizations as allies. By placing excise taxes within a strategic policy nexus that promotes mutual public interest goals, public health advocates may use a similar strategy in forging their own excise tax coalitions. PMID:19443832

How Canada Changed from Exporting Asbestos to Banning Asbestos: The Challenges That Had to Be Overcome

PubMed Central

Ruff, Kathleen

2017-01-01

Less than ten years ago, the asbestos industry enjoyed the support of every Quebec and Canadian political party. The Chrysotile Institute and the International Chrysotile Association, both located in Quebec, aggressively marketed asbestos around the world, claiming scientific evidence showed that chrysotile asbestos could be safely used. The industry created a climate of intimidation. Consequently, no groups advocating for victims of asbestos or campaigning for its outright ban existed in Quebec to challenge the industry. A campaign was launched to mobilize the scientific community to speak out. Working with scientists, activists, and asbestos victims around the world, a small group of Quebec scientists exposed the false arguments of the asbestos industry. They publicly and repeatedly challenged the unscientific and unethical asbestos policy of the government. By appealing to Quebec values and holding those in power accountable, the campaign won public support and succeeded against all odds in defeating the asbestos industry. PMID:28953226

Discovery of innovative therapeutics: today's realities and tomorrow's vision. 2. Pharma's challenges and their commitment to innovation.

PubMed

Abou-Gharbia, Magid; Childers, Wayne E

2014-07-10

The pharmaceutical industry is facing enormous challenges, including reduced efficiency, stagnant success rate, patent expirations for key drugs, fierce price competition from generics, high regulatory hurdles, and the industry's perceived tarnished image. Pharma has responded by embarking on a range of initiatives. Other sectors, including NIH, have also responded. Academic drug discovery groups have appeared to support the transition of innovative academic discoveries and ideas into attractive drug discovery opportunities. Part 1 of this two-part series discussed the criticisms that have been leveled at the pharmaceutical industry over the past 3 decades and summarized the supporting data for and against these criticisms. This second installment will focus on the current challenges facing the pharmaceutical industry and Pharma's responses, focusing on the industry's changing perspective and new business models for coping with the loss of talent and declining clinical pipelines as well as presenting some examples of recent drug discovery successes.

A Descriptive Study of Perceived Impact of Gender on Employment Status, Type of Work, Industry Relationships, Working Environment & Job Satisfaction in Livestock Industry Magazines.

ERIC Educational Resources Information Center

Jeffers, Dennis W.

A two-part study examined the employment status, distribution, job satisfaction, and promotion opportunities of women working for livestock industry magazines. Livestock publications were chosen for this research because they are typical of industry-related magazines and are traditionally dominated by males. The mastheads of 59 magazines were…

JPRS Report, Near East & South Asia, India

DTIC Science & Technology

1991-09-23

said, one field, particularly in consumer industries , small-scale which favoured total decentralisation with each republic sector and self-employment...glass fibres of all types. All food processing industries other than milk food , malted foods , and flour, but excluding the items reserved for Ceramics...small-scale sector. (i) ceramics for industrial uses. All items of packaging for food processing industries Cement Products: excluding the items

40 CFR Table I-2 to Subpart I of... - Examples of Fluorinated GHGs Used by the Electronics Industry

Code of Federal Regulations, 2014 CFR

2014-07-01

... the Electronics Industry I Table I-2 to Subpart I of Part 98 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) MANDATORY GREENHOUSE GAS REPORTING Electronics... the Electronics Industry Product type Fluorinated GHGs and fluorinated heat transfer fluids used...

78 FR 49662 - Airworthiness Directives; PIAGGIO AERO INDUSTRIES S.p.A Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-15

... Airworthiness Directives; PIAGGIO AERO INDUSTRIES S.p.A Airplanes AGENCY: Federal Aviation Administration (FAA... airworthiness directive (AD) for PIAGGIO AERO INDUSTRIES S.p.A. Model P-180 airplanes. The rescinded AD resulted... to develop on affected type design airplanes. DATES: This AD is effective September 19, 2013...

Authors’ Financial Relationships With the Food and Beverage Industry and Their Published Positions on the Fat Substitute Olestra

PubMed Central

Levine, Jane; Gussow, Joan Dye; Hastings, Diane; Eccher, Amy

2003-01-01

Objectives. This study examined the association between authors’ published positions on the safety and efficacy in assisting with weight loss of the Procter & Gamble (P&G) fat substitute olestra and their financial relationships with the food and beverage industry. Methods. Journal articles about olestra, and their authors, were classified as supportive, critical, or neutral with respect to its use. Authors not known to have industry affiliations were surveyed about their financial relationships. Results. Supportive authors were significantly more likely than critical or neutral authors to have financial relationships with P&G (80% vs 11% and 21%, respectively; P < .0001). All authors disclosing an affiliation with P&G were supportive. Conclusions. Because authors’ published opinions were associated with their financial relationships, obtaining noncommercial funding may be more essential to maintaining objectivity than disclosing personal financial interests. PMID:12660215

Legionnaires' disease from a cooling tower in a community outbreak in Lidköping, Sweden- epidemiological, environmental and microbiological investigation supported by meteorological modelling.

PubMed

Ulleryd, Peter; Hugosson, Anna; Allestam, Görel; Bernander, Sverker; Claesson, Berndt E B; Eilertz, Ingrid; Hagaeus, Anne-Christine; Hjorth, Martin; Johansson, Agneta; de Jong, Birgitta; Lindqvist, Anna; Nolskog, Peter; Svensson, Nils

2012-11-21

An outbreak of Legionnaires' Disease took place in the Swedish town Lidköping on Lake Vänern in August 2004 and the number of pneumonia cases at the local hospital increased markedly. As soon as the first patients were diagnosed, health care providers were informed and an outbreak investigation was launched. Classical epidemiological investigation, diagnostic tests, environmental analyses, epidemiological typing and meteorological methods. Thirty-two cases were found. The median age was 62 years (range 36 - 88) and 22 (69%) were males. No common indoor exposure was found. Legionella pneumophila serogroup 1 was found at two industries, each with two cooling towers. In one cooling tower exceptionally high concentrations, 1.2 × 109 cfu/L, were found. Smaller amounts were also found in the other tower of the first industry and in one tower of the second plant. Sero- and genotyping of isolated L. pneumophila serogroup 1 from three patients and epidemiologically suspected environmental strains supported the cooling tower with the high concentration as the source. In all, two L. pneumophila strains were isolated from three culture confirmed cases and both these strains were detected in the cooling tower, but one strain in another cooling tower as well. Meteorological modelling demonstrated probable spread from the most suspected cooling tower towards the town centre and the precise location of four cases that were stray visitors to Lidköping. Classical epidemiological, environmental and microbiological investigation of an LD outbreak can be supported by meteorological modelling methods.The broad competence and cooperation capabilities in the investigation team from different authorities were of paramount importance in stopping this outbreak.

Legionnaires’ disease from a cooling tower in a community outbreak in Lidköping, Sweden- epidemiological, environmental and microbiological investigation supported by meteorological modelling

PubMed Central

2012-01-01

Background An outbreak of Legionnaires’ Disease took place in the Swedish town Lidköping on Lake Vänern in August 2004 and the number of pneumonia cases at the local hospital increased markedly. As soon as the first patients were diagnosed, health care providers were informed and an outbreak investigation was launched. Methods Classical epidemiological investigation, diagnostic tests, environmental analyses, epidemiological typing and meteorological methods. Results Thirty-two cases were found. The median age was 62 years (range 36 – 88) and 22 (69%) were males. No common indoor exposure was found. Legionella pneumophila serogroup 1 was found at two industries, each with two cooling towers. In one cooling tower exceptionally high concentrations, 1.2 × 109 cfu/L, were found. Smaller amounts were also found in the other tower of the first industry and in one tower of the second plant. Sero- and genotyping of isolated L. pneumophila serogroup 1 from three patients and epidemiologically suspected environmental strains supported the cooling tower with the high concentration as the source. In all, two L. pneumophila strains were isolated from three culture confirmed cases and both these strains were detected in the cooling tower, but one strain in another cooling tower as well. Meteorological modelling demonstrated probable spread from the most suspected cooling tower towards the town centre and the precise location of four cases that were stray visitors to Lidköping. Conclusions Classical epidemiological, environmental and microbiological investigation of an LD outbreak can be supported by meteorological modelling methods. The broad competence and cooperation capabilities in the investigation team from different authorities were of paramount importance in stopping this outbreak. PMID:23171054

Systematic approach to characterisation of NORM in Thailand.

PubMed

Chanyotha, S; Kranrod, C; Pengvanich, P

2015-11-01

The aim of this article is to provide information on the systematic approach that has been developed for the measurement of natural radiation exposure and the characterisation of naturally occurring radioactive materials (NORM) in terms of occurrence and distribution in various industrial processes, including the produced waste from the mineral industries in Thailand. The approach can be adapted for various types of study areas. The importance of collaboration among research institutions is discussed. Some developments include 25 documents; the redesign of the field equipment, such as the gamma survey meter, for convenient access to conduct measurement in various study areas; the method to collect and analyse radon gas from a natural gas pipeline and the manganese dioxide fibre to adsorb radium on-site for laboratory analysis. The NORM project in Thailand has been carried out for more than 10 y to support the development of NORM regulation in Thailand. In the previous studies as well as current, international standards for action levels have been adopted for safety purpose. © The Author 2015. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Industrial and occupational ergonomics in the petrochemical process industry: a regression trees approach.

PubMed

Bevilacqua, M; Ciarapica, F E; Giacchetta, G

2008-07-01

This work is an attempt to apply classification tree methods to data regarding accidents in a medium-sized refinery, so as to identify the important relationships between the variables, which can be considered as decision-making rules when adopting any measures for improvement. The results obtained using the CART (Classification And Regression Trees) method proved to be the most precise and, in general, they are encouraging concerning the use of tree diagrams as preliminary explorative techniques for the assessment of the ergonomic, management and operational parameters which influence high accident risk situations. The Occupational Injury analysis carried out in this paper was planned as a dynamic process and can be repeated systematically. The CART technique, which considers a very wide set of objective and predictive variables, shows new cause-effect correlations in occupational safety which had never been previously described, highlighting possible injury risk groups and supporting decision-making in these areas. The use of classification trees must not, however, be seen as an attempt to supplant other techniques, but as a complementary method which can be integrated into traditional types of analysis.

Impact of aerobic stabilization on the characteristics of treatment sludge in the leather tanning industry.

PubMed

Cokgor, Emine Ubay; Aydinli, Ebru; Tas, Didem Okutman; Zengin, Gulsum Emel; Orhon, Derin

2014-01-01

The efficiency of aerobic stabilization on the treatment sludge generated from the leather industry was investigated to meet the expected characteristics and conditions of sludge prior to landfill. The sludge types subjected to aerobic stabilization were chemical treatment sludge, biological excess sludge, and the mixture of both chemical and biological sludges. At the end of 23 days of stabilization, suspended solids, volatile suspended solids and total organic carbon removal efficiencies were determined as 17%, 19% and 23% for biological sludge 31%, 35% and 54% for chemical sludge, and 32%, 34% and 63% for the mixture of both chemical and biological sludges, respectively. Model simulations of the respirometric oxygen uptake rate measurements showed that the ratio of active biomass remained the same at the end of the stabilization for all the sludge samples. Although mixing the chemical and biological sludges resulted in a relatively effective organic carbon and solids removal, the level of stabilization achieved remained clearly below the required level of organic carbon content for landfill. These findings indicate the potential risk of setting numerical restrictions without referring to proper scientific support.

Treated wastewater phytotoxicity assessment using Lactuca sativa: Focus on germination and root elongation test parameters.

PubMed

Priac, Anne; Badot, Pierre-Marie; Crini, Grégorio

2017-03-01

Sensitive and simple ecotoxicological bioassays like seed germination and root elongation tests are commonly used to evaluate the phytotoxicity of waste and industrial discharge waters. Although the tests are performed following national and international standards, various parameters such as the number of seeds per dish, the test duration or the type of support used remain variable. To be able to make a correct comparison of results from different studies, it is crucial to know which parameter(s) could affect ecotoxicological diagnosis. We tested four different control waters and three seed densities. No significant differences on either germination rate or root elongation endpoints were shown. Nevertheless, we found that the four lettuce cultivars (Appia, batavia dorée de printemps, grosse blonde paresseuse, and Kinemontepas) showed significantly different responses when watered with the same and different metal-loaded industrial discharge water. From the comparison, it is clear that a differential sensitivity scale occurs among not just species but cultivars. Copyright © 2017 Académie des sciences. Published by Elsevier Masson SAS. All rights reserved.

Organic/Inorganic Polymeric Composites for Heat-Transfer Reduction

NASA Technical Reports Server (NTRS)

Smith, Trent; Williams, Martha

2008-01-01

Organic/inorganic polymeric composite materials have been invented with significant reduction in heat-transfer properties. Measured decreases of 20-50 percent in thermal conductivity versus that of the unmodified polymer matrix have been attained. These novel composite materials also maintain mechanical properties of the unmodified polymer matrix. The present embodiments are applicable, but not limited to: racing applications, aerospace applications, textile industry, electronic applications, military hardware improvements, and even food service industries. One specific application of the polymeric composition is for use in tanks, pipes, valves, structural supports, and components for hot or cold fluid process systems where heat flow through materials is problematic and not desired. With respect to thermal conductivity and physical properties, these materials are superior alternatives to prior composite materials. These materials may prove useful as substitutes for metals in some cryogenic applications. A material of this type can be made from a blend of thermoplastics, elastomers, and appropriate additives and processed on normal polymer processing equipment. The resulting processed organic/inorganic composite can be made into fibers, molded, or otherwise processed into useable articles.

Online Chats to Assess Stakeholder Perceptions of Meat Chicken Intensification and Welfare.

PubMed

Howell, Tiffani J; Rohlf, Vanessa I; Coleman, Grahame J; Rault, Jean-Loup

2016-10-27

Evidence suggests that there is variation in support for specific chicken farming practices amongst stakeholder groups, and this should be explored in more detail to understand the nature of these differences and work towards convergence. Online focus groups were used to assess attitudes to animal welfare in meat chicken farming in this pilot study. Across six online chats, 25 participants (general public, n = 8; animal advocacy group, n = 11, meat chicken industry, n = 3; research or veterinary practice who had experience with poultry but no declared industry affiliation, n = 3) discussed meat chicken intensification and welfare. Of those, 21 participants completed pre- and post-chat surveys gauging perceptions and objective knowledge about meat chicken management. Main reasons for intensification support were perceptions of improved bird health, and perceptions that it is a cost-effective, sustainable farming system. Reasons for opposition included perceptions that a large number of birds kept are in close proximity and have limited ability to perform natural behaviours. Misunderstandings about current practices were clarified in chats which contained industry representation. Participants agreed on the need for enforceable standards and industry transparency. Industry-affiliated members rated welfare of meat chickens higher, and gave lower ratings for the importance of natural living, than other stakeholder groups (both p = 0.001). On average, while objective knowledge of intensification increased after chat participation (p = 0.03), general welfare ratings and support for intensification did not change over time, counter to assertions that lack of knowledge results in lack of support for some practices.

Support for smoke-free policies in the Cyprus hospitality industry.

PubMed

Lazuras, Lambros; Savva, Christos S; Talias, Michael A; Soteriades, Elpidoforos S

2015-12-01

The present study used attitudinal and behavioural indicators to measure support for smoke-free policies among employers and employees in the hospitality industry in Cyprus. A representative sample of 600 participants (95 % response rate) completed anonymous structured questionnaires on demographic variables, smoking status, exposure to second-hand smoke at work and related health beliefs, social norms, and smoke-free policy support. Participants were predominantly males (68.3 %), with a mean age of 40 years (SD = 12.69), and 39.7 % were employers/owners of the hospitality venue. Analysis of variance showed that employers and smokers were less supportive of smoke-free policies, as compared to employees and non-smokers. Linear regression models showed that attitudes towards smoke-free policy were predicted by smoking status, SHS exposure and related health beliefs, and social norm variables. Logistic regression analysis showed that willingness to confront a policy violator was predicted by SHS exposure, perceived prevalence of smoker clients, and smoke-free policy attitudes. SHS exposure and related health beliefs, and normative factors should be targeted by interventions aiming to promote policy support in the hospitality industry in Cyprus.

Stakeholder perspectives on national policy for regulating the school food environment in Mexico.

PubMed

Monterrosa, Eva C; Campirano, Fabricio; Tolentino Mayo, Lizbeth; Frongillo, Edward A; Hernández Cordero, Sonia; Kaufer-Horwitz, Martha; Rivera, Juan A

2015-02-01

In Mexico, the school environment has been promoting sale of unhealthy foods. There is little empirical evidence on multi-stakeholder perspectives around national school food policy to regulate this. We studied stakeholders' perspectives on the proposed regulation for school sale of unhealthy foods. Comments about the regulation were available from an open consultation process held in June 2010 before the approval and implementation of the regulation. To examine perspectives, we coded 597 comments for beliefs, expectations and demands in NVivo. We created matrices by actors: academics, parents, citizens, health professionals and food industry. For academics, citizens and health professionals, the primary issue regarding the regulation was obesity, while for parents it was health of children. Academics, citizens, health professionals and parents believed that government was responsible for health of citizens, expected that this regulation would improve eating habits and health (i.e. less obesity and chronic diseases), and demanded that unhealthy foods be removed from schools. Parents demanded immediate action for school food policy that would protect their children. Citizens and health professionals demanded nutrition education and healthy food environment. Food industry opposed the regulation because it would not solve obesity or improve diet and physical activity behaviours. Instead, industry would lose income and jobs. Food industry demanded policy aimed at families that included nutrition education and physical activity. There was substantial consensus in narratives and perspectives for most actor types, with the primary narrative being the food environment followed by shared responsibility. Food industry rejected both these narratives, espousing instead the narrative of personal responsibility. Consensus among most actor groups supports the potential success of implementation of the regulation in Mexican schools. With regard to addressing childhood obesity, sound government policy is needed to balance different perspectives and desired outcomes among societal actors, particularly in Mexico between food industry and other actors. Published by Oxford University Press in association with The London School of Hygiene and Tropical Medicine © The Author 2013; all rights reserved.

Continuing Education That Matters: A Successful, Evidence-Based Course with Minimal Pharmaceutical Funding

ERIC Educational Resources Information Center

Wolfrey, Jeff; Brown, Steven R.; Ebell, Mark H.; Geng, Jamie

2012-01-01

Concerns about the influence of the pharmaceutical and medical device industries on continuing medical education (CME) have been voiced frequently over the past decade. Reliance on industry funding increases the potential for bias. Industry-supported CME often emphasizes conditions that can be treated with newer drugs or devices rather than those…

Q2/Q3 2016 Solar Industry Update

DOE Office of Scientific and Technical Information (OSTI.GOV)

Feldman, David; Boff, Daniel; Margolis, Robert

This technical presentation provides an update on the major trends that occurred in the solar industry in the Q2 and Q3 of 2016. Major topics of focus include global and U.S. supply and demand, module and system price, investment trends and business models, and updates on U.S. government programs supporting the solar industry.

Q3/Q4 2016 Solar Industry Update

DOE Office of Scientific and Technical Information (OSTI.GOV)

Feldman, David; Boff, Daniel; Margolis, Robert

This technical presentation provides an update on the major trends that occurred in the solar industry in the Q3 and Q4 of 2016. Major topics of focus include global and U.S. supply and demand, module and system price, investment trends and business models, and updates on U.S. government programs supporting the solar industry.

Q2/Q3 2017 Solar Industry Update

DOE Office of Scientific and Technical Information (OSTI.GOV)

Feldman, David J.; Hoskins, Jack; Margolis, Robert M.

This technical presentation provides an update on the major trends that occurred in the solar industry in Q2 and Q3 of 2017. Major topics of focus include global and U.S. supply and demand, module and system price, investment trends and business models, and updates on U.S. government programs supporting the solar industry.

Q4 2017/Q1 2018 Solar Industry Update

DOE Office of Scientific and Technical Information (OSTI.GOV)

Feldman, David J; Margolis, Robert M; Hoskins, Jack

This technical presentation provides an update on the major trends that occurred in the solar industry in Q4 2017 and Q1 2018. Major topics of focus include global and U.S. supply and demand, module and system price, investment trends and business models, and updates on U.S. government programs supporting the solar industry.

Q3/Q4 2017 Solar Industry Update

DOE Office of Scientific and Technical Information (OSTI.GOV)

Feldman, David J.; Hoskins, Jack; Margolis, Robert M.

This technical presentation provides an update on the major trends that occurred in the solar industry in the Q3 and Q4 of 2017. Major topics of focus include global and U.S. supply and demand, module and system price, investment trends and business models, and updates on U.S. government programs supporting the solar industry.

Effect of the spray application technique on the deposition of entomopathogenic nematodes in vegetables.

PubMed

Brusselman, Eva; Beck, Bert; Pollet, Sabien; Temmerman, Femke; Spanoghe, Pieter; Moens, Maurice; Nuyttens, David

2012-03-01

The present study compared entomopathogenic nematode delivery at the base of savoy cabbage and cauliflower, at the lower side of savoy cabbage and cauliflower leaves and in leek stems and the ground deposition using a five-nozzle spray boom equipped with an ISO 08 flat fan, an air induction flat fan and Twinjet spray nozzles. Additionally, an air support system and a row application system were evaluated. Approximately 40% of the applied nematodes did not reach the foot of the cabbage plants. The use of an air support system or a row application system improved nematode deposition at the savoy cabbage base. Relative nematode deposition on the lower side of savoy cabbage leaves was 27.20%, while only 2.64% of the applied nematodes reached the lower side of cauliflower leaves. After spraying leek with a standard boom, a low relative nematode deposition (26.64%) was measured in the leek stem. Nozzle type affected the distribution of nematodes in droplet spots. Nozzle type has a minor effect on the number of entomopathogenic nematodes delivered on difficult-to-reach targets. The use of modified spray application techniques directing the spray to the target site are necessary to increase the chances of contact of entomopathogenic nematodes with their target. Copyright © 2011 Society of Chemical Industry.

Salicylic acid prevents Trichoderma harzianum from entering the vascular system of roots.

PubMed

Alonso-Ramírez, Ana; Poveda, Jorge; Martín, Ignacio; Hermosa, Rosa; Monte, Enrique; Nicolás, Carlos

2014-10-01

Trichoderma is a soil-borne fungal genus that includes species with a significant impact on agriculture and industrial processes. Some Trichoderma strains exert beneficial effects in plants through root colonization, although little is known about how this interaction takes place. To better understand this process, the root colonization of wild-type Arabidopsis and the salicylic acid (SA)-impaired mutant sid2 by a green fluorescent protein (GFP)-marked Trichoderma harzianum strain was followed under confocal microscopy. Trichoderma harzianum GFP22 was able to penetrate the vascular tissue of the sid2 mutant because of the absence of callose deposition in the cell wall of root cells. In addition, a higher colonization of sid2 roots by GFP22 compared with that in Arabidopsis wild-type roots was detected by real-time polymerase chain reaction. These results, together with differences in the expression levels of plant defence genes in the roots of both interactions, support a key role for SA in Trichoderma early root colonization stages. We observed that, without the support of SA, plants were unable to prevent the arrival of the fungus in the vascular system and its spread into aerial parts, leading to later collapse. © 2014 BSPP AND JOHN WILEY & SONS LTD.

Textile industry and occupational cancer.

PubMed

Singh, Zorawar; Chadha, Pooja

2016-01-01

Thousands of workers are engaged in textile industry worldwide. Textile industry involves the use of different kinds of dyes which are known to possess carcinogenic properties. Solvents used in these industries are also associated with different health related hazards including cancer. In previous studies on textile and iron industries, the authors have reported genotoxicity among them and observed occurrence of cancer deaths among textile industry workers. Thus, an attempt has been made to compile the studies on the prevalence of different types of cancers among textile industry workers. A wide literature search has been done for compiling the present paper. Papers on cancer occurrence among textile industry workers have been taken from 1976 to 2015. A variety of textile dyes and solvents, many of them being carcinogenic, are being used worldwide in the textile industry. The textile industry workers are therefore, in continuous exposure to these dyes, solvents, fibre dusts and various other toxic chemicals. The present study evaluates the potential of different chemicals and physical factors to be carcinogenic agents among occupationally exposed workers by going through various available reports and researches. Papers were collected using different databases and a number of studies report the association of textile industry and different types of cancer including lung, bladder, colorectal and breast cancer. After going through the available reports, it can be concluded that workers under varied job categories in textile industries are at a higher risk of developing cancer as various chemicals used in the textile industry are toxic and can act as potential health risk in inducing cancer among them. Assessing the cancer risk at different job levels in textile industries may be found useful in assessing the overall risk to the workers and formulating the future cancer preventive strategies.

Department of Energy Support of Energy Intensive Manufacturing Related to Refractory Research

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hemrick, James Gordon

For many years, the United States Department of Energy (DOE) richly supported refractory related research to enable greater energy efficiency processes in energy intensive manufacturing industries such as iron and steel, glass, aluminum and other non-ferrous metal production, petrochemical, and pulp and paper. Much of this support came through research projects funded by the former DOE Energy Efficiency and Renewable Energy (EERE) Office of Industrial Technologies (OIT) under programs such as Advanced Industrial Materials (AIM), Industrial Materials of the Future (IMF), and the Industrial Technologies Program (ITP). Under such initiatives, work was funded at government national laboratories such as Oakmore » Ridge National Laboratory (ORNL), at universities such as West Virginia University (WVU) and the Missouri University of Science and Technology (MS&T) which was formerly the University of Missouri Rolla, and at private companies engaged in these manufacturing areas once labeled industries of the future by DOE due to their strategic and economic importance to American industry. Examples of such projects are summarized below with information on the scope, funding level, duration, and impact. This is only a sampling of representative efforts funded by the DOE in which ORNL was involved over the period extending from 1996 to 2011. Other efforts were also funded during this time at various other national laboratories, universities and private companies under the various programs mentioned above. Discussion of the projects below was chosen because I was an active participant in them and it is meant to give a sampling of the magnitude and scope of investments made by DOE in refractory related research over this time period.« less

The 'Sydney Principles' for reducing the commercial promotion of foods and beverages to children.

PubMed

Swinburn, Boyd; Sacks, Gary; Lobstein, Tim; Rigby, Neville; Baur, Louise A; Brownell, Kelly D; Gill, Tim; Seidell, Jaap; Kumanyika, Shiriki

2008-09-01

A set of seven principles (the 'Sydney Principles') was developed by an International Obesity Taskforce (IOTF) Working Group to guide action on changing food and beverage marketing practices that target children. The aim of the present communication is to present the Sydney Principles and report on feedback received from a global consultation (November 2006 to April 2007) on the Principles. The Principles state that actions to reduce marketing to children should: (i) support the rights of children; (ii) afford substantial protection to children; (iii) be statutory in nature; (iv) take a wide definition of commercial promotions; (v) guarantee commercial-free childhood settings; (vi) include cross-border media; and (vii) be evaluated, monitored and enforced. The draft principles were widely disseminated and 220 responses were received from professional and scientific associations, consumer bodies, industry bodies, health professionals and others. There was virtually universal agreement on the need to have a set of principles to guide action in this contentious area of marketing to children. Apart from industry opposition to the third principle calling for a statutory approach and several comments about the implementation challenges, there was strong support for each of the Sydney Principles. Feedback on two specific issues of contention related to the age range to which restrictions should apply (most nominating age 16 or 18 years) and the types of products to be included (31% nominating all products, 24% all food and beverages, and 45% energy-dense, nutrient-poor foods and beverages). The Sydney Principles, which took a children's rights-based approach, should be used to benchmark action to reduce marketing to children. The age definition for a child and the types of products which should have marketing restrictions may better suit a risk-based approach at this stage. The Sydney Principles should guide the formation of an International Code on Food and Beverage Marketing to Children.

Increasing public support for food-industry related, obesity prevention policies: The role of a taste-engineering frame and contextualized values.

PubMed

Ortiz, Selena E; Zimmerman, Frederick J; Adler, Gary J

2016-05-01

Support for policies to combat obesity is often undermined by a public sense that obesity is largely a matter of personal responsibility. Industry rhetoric is a major contributor to this perception, as the soda/fast food/big food companies emphasize choice and individual agency in their efforts to neutralize policies that are burdensome. Yet obesity experts recognize that environmental forces play a major role in obesity. We investigate whether exposure to a taste-engineering frame increases support for food and beverage policies that address obesity. A taste-engineering frame details strategies used by the food industry to engineer preferences and increase the over-consumption of processed foods and sugary beverages. We also examine the effects of exposure to two contextualized values that have recently been promoted in expert discourse-consumer knowledge and consumer safety - on public support of policies. Our research shows how causal frames and contextualized values may effectively produce support for new obesity policies. We use an online survey experiment to test the effects of exposure to a taste-engineering frame (TEF), the value of consumer knowledge (CK), or the value of consumer safety (CS), on level of support for a range of policies. A random sample of adults, age 18 + living in the United States was included in the study (N = 2580). Ordered logistic regression was used to measure the effects of treatment exposure. The primary outcome was level-of-support for four (4) food-industry related, obesity prevention policies (aka food and beverage policies): 1) require food-manufacturers to disclose the amount of additives in food products on food packaging; 2) require food-manufacturers to advertise food products in accordance with their actual nutritional value; 3) prohibit all high-fat, high-sugar food advertising on television programming watched primarily by children; and 4) increase healthy food availability in work sites, schools, and hospitals. These data suggest that a taste-engineering frame and contextualized values significantly increase public support for many of the food and beverage policies tested. Applying a taste-engineering frame and/or contextualized values to address obesity advances a population-based policy agenda to counteract the effects of food-industry strategies. Copyright © 2016 Elsevier Ltd. All rights reserved.

Johnson Space Center Research and Technology Annual Report 1998-1999

NASA Technical Reports Server (NTRS)

Abbey, George W. S.

2004-01-01

As the principle center for NASA's Human Exploration and Development of Space (HEDS) Enterprise, the Johnson Space Center (JSC) leads NASA development of human spacecraft, human support systems, and human spacecraft operations. An important element in implementing this mission, JSC has focused on developing the infrastructure and partnerships that enable the technology development for future NASA programs. In our efforts to develop key technologies, we have found that collaborative relationships with private industry and academia strengthen our capabilities, infuse innovative ideas, and provide alternative applications for our development projects. The American public has entrusted NASA with the responsibility for space technology development, and JSC is committed to the transfer of the technologies that we develop to the private sector for further development and application. It is our belief that commercialization of NASA technologies benefits both American industry and NASA through technology innovation and continued partnering. To this end, we present the 1998-1999 JSC Research and Technology Report. As your guide to the current JSC technologies, this report showcases the projects in work at JSC that may be of interest to U.S. industry, academia, and other government agencies (federal, state, and local). For each project, potential alternative uses and commercial applications are described. To aid in your search, projects are arranged according to the Major Product Groups used by CorpTech to classify and index types of industry. Some projects fall into multiple categories and are placed under the predominant category, for example, an artificial intelligence project is listed under the Computer Software category, while its function is to automate a process (Automation category).

Global health and development: conceptualizing health between economic growth and environmental sustainability.

PubMed

Borowy, Iris

2013-07-01

After World War II, health was firmly integrated into the discourse about national development. Transition theories portrayed health improvements as part of an overall development pattern based on economic growth as modeled by the recent history of industrialization in high-income countries. In the 1970s, an increasing awareness of the environmental degradation caused by industrialization challenged the conventional model of development. Gradually, it became clear that health improvements depended on poverty-reduction strategies including industrialization. Industrialization, in turn, risked aggravating environmental degradation with its negative effects on public health. Thus, public health in low-income countries threatened to suffer from lack of economic development as well as from the results of global economic development. Similarly, demands of developing countries risked being trapped between calls for global wealth redistribution, a political impossibility, and calls for unrestricted material development, which, in a world of finite land, water, air, energy, and resources, increasingly looked like a physical impossibility, too. Various international bodies, including the WHO, the Brundtland Commission, and the World Bank, tried to capture the problem and solution strategies in development theories. Broadly conceived, two models have emerged: a "localist model," which analyzes national health data and advocates growth policies with a strong focus on poverty reduction, and a "globalist" model, based on global health data, which calls for growth optimization, rather than maximization. Both models have focused on different types of health burdens and have received support from different institutions. In a nutshell, the health discourse epitomized a larger controversy regarding competing visions of development.

The tobacco industry's use of Wall Street analysts in shaping policy.

PubMed

Alamar, B C; Glantz, S A

2004-09-01

To document how the tobacco industry has used Wall Street analysts to further its public policy objectives. Searching tobacco documents available on the internet, newspaper articles, and transcripts of public hearings. The tobacco industry used nominally independent Wall Street analysts as third parties to support the tobacco industry's legislative agenda at both national and state levels in the USA. The tobacco industry has, for example, edited the testimony of at least one analyst before he testified to the US Senate Judiciary Committee, while representing himself as independent of the industry. The tobacco industry has used undisclosed collaboration with Wall Street analysts, as they have used undisclosed relationships with research scientists and academics, to advance the interests of the tobacco industry in public policy.

Pernicious anaemia in the textile industry.

PubMed

Roman, E; Beral, V; Sanjose, S; Schilling, R; Watson, A

1991-05-01

The objective was to examine whether the observed excess mortality from anaemia in textile and clothing workers was associated with any specific anaemia type or occupational activity. The design was a death certificate based case-control study of textile and clothing workers who died in England and Wales in the years surrounding the decennial censuses of 1961, 1971, and 1981. The main outcome measures were type of anaemia, place of residence, place of birth, and occupation. The frequency of the different types of anaemia in textile and clothing workers differed from that of England and Wales with relatively more deaths from pernicious anaemia than in the country as a whole (74 observed v 55 expected deaths). Within the industry, those whose death was attributed to pernicious anaemia were more than twice as likely as other textile and clothing workers to have worked in textile mills (odds ratio = 2.4, 95% confidence interval 1.4-4.2). These results could not be explained by age, sex, place of residence, or place of birth, and review of the death certificates did not suggest that pernicious anaemia as a cause of death had been recorded in error. Historical support for the finding was found in the Registrar General's 1931 decennial supplement on occupational mortality, in which the standardised mortality ratio from pernicious anaemia in male textile mill workers was estimated to be twice that of the general population. In conclusion, occupational factors, specifically work in textile mills, could be implicated in the pathogenesis of pernicious anaemia. The aetiology of this disease is not well understood and further study of pernicious anaemia in textile mill workers is required.

Paths towards Family‐friendly Working Time Arrangements: Comparing Workplaces in Different Countries and Industries

PubMed Central

2016-01-01

Abstract Although studies have examined the distribution and conditions of employer‐provided work–family arrangements, we still lack a systematic investigation of how these vary for different countries and industries. Based on the European Working Conditions Survey 2010, this study examines the conditions under which firms provide family‐friendly working time arrangements and what the differences are across four countries (Austria, Denmark, Italy and the UK) and four industries. The impact of employee representatives, employee involvement, manager support and female managers varies across countries and industries because of the institutional environment (prevailing family model, industrial relations) and workforce composition (gender). The impact of employee representatives depends on their co‐determination rights, and the direction of their effect on the prevailing family model (e.g. negative in conservative countries such as Austria) and the gender composition of the workforce (negative in male‐dominated production, but positive in services). Employee involvement in the work organization is significantly positive in Austria and Denmark (both with co‐operative industrial relations), while manager support has the strongest effect in the UK (liberal regime). At the industry level, female supervisors are positively associated with family‐friendly working time arrangements only in the male‐dominated production industry. These findings suggest that the effects of agency variables and their direction vary depending on the institutional context. PMID:29242672

Entrepreneurial Alliances: A Study of Entrepreneurship and Strategic Alliances in the Charter School Industry

ERIC Educational Resources Information Center

Washington, Cheryl A.

2012-01-01

This study investigated the practices, processes, and success rates of 15 entrepreneurial alliances in the Texas charter school industry. The research involved interdisciplinary industries (business and education) and focused on how a specific type of alliance structure utilized social innovation to exploit opportunity and impact change in the…

78 FR 11996 - Energy Efficiency Program for Commercial and Industrial Equipment: Commercial and Industrial Pumps

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-21

.... EERE-2011-BT-STD-0031] RIN 1904-AC54 Energy Efficiency Program for Commercial and Industrial Equipment... meeting and availability of the Framework Document pertaining to the development of energy conservation... to and the issues presented by these equipment types, and in consideration of the travel schedules of...

LPN Analysis in the Health Industry.

ERIC Educational Resources Information Center

Omvig, Clayton P.; And Others

The health care industry has undergone a great many changes in the past several years: changes in technology, regulations, payment procedures, type of client, and personnel needs. A study attempted to answer the question, "What part will the licensed practical nurse (LPN) have in the health care industry of the future?" In Phase One of…

78 FR 32363 - Airworthiness Directives; PIAGGIO AERO INDUSTRIES S.p.A Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-30

... Airworthiness Directives; PIAGGIO AERO INDUSTRIES S.p.A Airplanes AGENCY: Federal Aviation Administration (FAA... propose to rescind an airworthiness directive (AD) for PIAGGIO AERO INDUSTRIES S.p.A. Model P-180... or is not likely to develop on affected type design airplanes, and therefore the AD should be...

Mask industry assessment trend analysis

NASA Astrophysics Data System (ADS)

Hughes, Greg; Yun, Henry

2009-01-01

Microelectronics industry leaders routinely name the cost and cycle time of mask technology and mask supply as top critical issues. A survey was created with support from SEMATECH to gather information about the mask industry as an objective assessment of its overall condition. This year's survey data were presented in detail at BACUS and the detailed trend analysis presented at EMLC. The survey is designed with the input of semiconductor company mask technologists and merchant mask suppliers. This year's assessment is the seventh in the current series of annual reports. With continued industry support, the report can be used as a baseline to gain perspective on the technical and business status of the mask and microelectronics industries. The report will continue to serve as a valuable reference to identify the strengths and opportunities of the mask industry. The results will be used to guide future investments on critical path issues. This year's survey is basically the same as the surveys in 2005 through 2007. Questions are grouped into seven categories: General Business Profile Information, Data Processing, Yields and Yield Loss, Mechanisms, Delivery Times, Returns, and Services. (Examples are given below). Within each category is a multitude of questions that creates a detailed profile of both the business and technical status of the critical mask industry.

United States Supports Distributed Wind Technology Improvements; NREL (National Renewable Energy Laboratory)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sinclair, Karin

2015-06-15

This presentation provides information on the activities conducted through the Competitiveness Improvement Project (CIP), initiated in 2012 by the U.S. Department of Energy (DOE) and executed through the National Renewable Energy Laboratory (NREL) to support the distributed wind industry. The CIP provides research and development funding and technical support to improve distributed wind turbine technology and increase the competitiveness of U.S. small and midsize wind turbine manufacturers. Through this project, DOE/NREL assists U.S. manufacturers to lower the levelized cost of energy of wind turbines through component improvements, manufacturing process upgrades, and turbine testing. Ultimately, this support is expected to leadmore » to turbine certification through testing to industry-recognized wind turbine performance and safety standards.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Makansi, J.

The three pillars that support the ivory tower of research and development (R and D) in the US power industry are concurrently being cut to a new size: industry-sponsored collaborative R and D, as managed by the Electric Power Research Institute (EPRI), is being challenged as interutility competition grows; government-supported R and D is set to decline as more elected officials begin to take fiscal responsibility seriously; and R and D supported by individual equipment, process, and fuel suppliers is eroding as a result of intense cost-cutting in an era of bruising global competition. Regarding the latter, slim or non-existentmore » profit margins leave little incentive for R and D work. Not only is support faltering, the structural priorities are shifting too. Focus today, according to those in the R and D community, has shifted from efforts with 10- to 15-yr payoff to those with perhaps a 5-yr payoff. R and D aimed at near-term production development or correcting field problems following over-zealous marketing of earlier R and D results, is taking precedence over R and D with medium- and long-term strategic goals. While current and future R and D funding erodes, the backlog of R and D available to the industry is steadily being applied commercially. This report portends what the next few years will bring for the technology demonstrations of most importance to the industry.« less

Pharmaceutical Industry in Syria

PubMed Central

2010-01-01

The aim of this article is to present the development of the pharmaceutical industry in Syria using national and international public data sources. At the end of the 80ies, the pharmaceutical industry in Syria was very poor, covering 6% of the national needs. In less than 20 years, with the government support in terms of legal frame and strategic political engagement, the Syrian pharmaceutical industry finally covered almost 90% of the national needs, in terms of drugs, and exported drugs in around 52 Arabian countries. Beyond covering the local market, the main added values of this huge development consisted in exporting drugs in amount of 150 million dollars per year and providing jobs for 17000 Syrian people, out of which around 85% are women. Strong and weak points of the pharmaceutical sector are taken into consideration in the article and further interventions to support a sustainable development are proposed by the author. PMID:20945828

KENNEDY SPACE CENTER, FLA. - Visitors stop at the Orbital Sciences booth during Space Congress Week, held April 29-May 2, 2003, in Cape Canaveral, Fla. The Space Congress is an international conference that gathers attendees from the scientific community, the space industry workforce, educators and local supporting industries. This year's event commemorated the 40th anniversary of the Kennedy Space Center and the Centennial of Flight. The theme for the Space Congress was "Linking the Past to the Future: A Celebration of Space."

NASA Image and Video Library

2003-04-30

KENNEDY SPACE CENTER, FLA. - Visitors stop at the Orbital Sciences booth during Space Congress Week, held April 29-May 2, 2003, in Cape Canaveral, Fla. The Space Congress is an international conference that gathers attendees from the scientific community, the space industry workforce, educators and local supporting industries. This year's event commemorated the 40th anniversary of the Kennedy Space Center and the Centennial of Flight. The theme for the Space Congress was "Linking the Past to the Future: A Celebration of Space."

Sexual recombination as a tool for engineering industrial Penicillium chrysogenum strains.

PubMed

Dahlmann, Tim A; Böhm, Julia; Becker, Kordula; Kück, Ulrich

2015-11-01

The recent discovery and functional characterization of opposite mating-type loci in the industrial penicillin producer Penicillium chrysogenum demonstrated their regulatory role in sexual as well as asexual development. Subsequent experiments further showed that a sexual life cycle can be induced in P. chrysogenum that was for long believed to reproduce exclusively by asexual propagation. Finally, crossing of wild type and production strains resulted in the generation of recombinant ascospore isolates. We predict from these recent findings that recombinant progeny for industrial applications can be obtained by sexual crossings and discuss experimental difficulties that occur when parental strains with karyotype heterogeneity are used for mating.

Effect of Fish Collagen Hydrolysates on Type I Collagen mRNA Levels of Human Dermal Fibroblast Culture

PubMed Central

Sanchez, Ana; Blanco, Maria; Correa, Begoña

2018-01-01

Fish discards and subproducts may represent an important source of raw material, not only for the food industry, but for other different kind of industries, such as the nutraceutical and cosmetic industries. Collagen, which is mainly obtained from animal skins, is an important structural protein in the animal kingdom having many different applications. It is well known that fish skins constitute a significant subproduct in the fishery industry, especially in the case of some species, where fish skins may represent up to 20% of the total body weight of fish. Peptides from collagen hydrolysates have been described to be useful for preventing skin aging and osteoarthritis, however, the mechanism for these biological activities is not well known. Fibroblasts are the main cell types involved in the collagen synthesis, and in the present work, human dermal fibroblasts have been exposed to the treatment of collagen peptides of two different molecular weight ranges. Results show that higher molecular weight collagen peptides produce higher synthesis of collagen type I mRNA and, therefore, it may suggest that prior molecular weight selection may be an important step to maximize the effect of collagen hydrolysates on collagen type I synthesis by dermal fibroblasts. PMID:29701725