40 CFR 35.918-1 - Additional limitations on awards for individual systems.

Code of Federal Regulations, 2012 CFR

2012-07-01

...-Clean Water Act § 35.918-1 Additional limitations on awards for individual systems. In addition to those... underground potable water sources; (g) Establish a system of user charges and industrial cost recovery in... as a minimum, periodic testing of water from existing potable water wells in the area. Where a...

40 CFR 35.918-1 - Additional limitations on awards for individual systems.

Code of Federal Regulations, 2013 CFR

2013-07-01

...-Clean Water Act § 35.918-1 Additional limitations on awards for individual systems. In addition to those... underground potable water sources; (g) Establish a system of user charges and industrial cost recovery in... as a minimum, periodic testing of water from existing potable water wells in the area. Where a...

40 CFR 35.918-1 - Additional limitations on awards for individual systems.

Code of Federal Regulations, 2011 CFR

2011-07-01

...-Clean Water Act § 35.918-1 Additional limitations on awards for individual systems. In addition to those... underground potable water sources; (g) Establish a system of user charges and industrial cost recovery in... as a minimum, periodic testing of water from existing potable water wells in the area. Where a...

40 CFR 35.918-1 - Additional limitations on awards for individual systems.

Code of Federal Regulations, 2014 CFR

2014-07-01

...-Clean Water Act § 35.918-1 Additional limitations on awards for individual systems. In addition to those... underground potable water sources; (g) Establish a system of user charges and industrial cost recovery in... as a minimum, periodic testing of water from existing potable water wells in the area. Where a...

Forming Limit Diagram of Titanium and Stainless Steel Alloys to Study the Formability of Hydro-Mechanical Deep Drawing Parts

NASA Astrophysics Data System (ADS)

Shirizly, A.

2005-08-01

The increase demand for stronger, lighter and economic sheet metal products, make the Hydromecanical deep drawing process lately more and more popular. The Hydromecanical process is used in almost all types of sheet metal parts from home appliances and kitchenware to automotive and aviation industries. Therefore, many common materials were tested and characterized by their ability to sustain large strains via the well known Forming Limit Diagram (FLD). The aim of this work is to examine the forming capability if the Hydromecanical process in production of hemisphere parts made of materials commonly used in the aviation and aerospace industries. Experimental procedures were carried out to assess their ductility through FLD and the Forming Limit Carve (FLC).Two type of material sheets were tested herewith for demonstrating the procedure: commercial pure titanium and stainless steel 316L. A numerical simulation of the Hydromecanical process was examined and compared to self made Hydromecanical deep drawing of hemispherical parts.

Evaluation of Surlyn 8920 as PHE Visor Material and Evaluations of New Adhesives for Improving Bonding Between Teflon and Stainless Steel at Cryogenic Temperature

NASA Technical Reports Server (NTRS)

Ray, Asit K.

1991-01-01

Two studies are presented, and in the first study, Surlyn 8920 (an ionic and amorphous low density polyethylene made by Dupont) was evaluated as a possible replacement of Plexyglass G as PHE visor material. Four formulations of the polymer were made by adding different amounts of UV stabilizer, energy quencher, and antioxident in a Brabender Plasticorder. The formulated polymers were molded in the form of sheets in a compression molder. Cut samples from the molded sheets were exposed in a weatherometer and tested on Instron Tensile Tester for strength and elongation. Specially molded samples of the formulated polymers were subjected to Charpy Impact Tests. In the second study, preliminary evaluations of adhesives for improvement of bonding between Teflon and stainless steel (SS) were performed. Kapton, a high temperature polyimide made by Dupont, and a rubber based adhesive made by Potter Paint Co., were evaluated against industrial quality epoxy, the current material used to bond Teflon and SS. The degreased surfaces of the SS discs were etched mechanically, with a few of these etched chemically. The surfaces of the SS discs were etched mechanically, with a few of these etched chemically. Bonding strengths were evaluated using lap shear tests on the Instron Tensile Tester for the samples bonded by Kapton and industrial quality epoxy. Bond strengths were also evaluated using a pull test on the Instron for the samples bonded by Potter adhesive (CWL-152) and industrial quality epoxy. Based on limited lap shear data, Kapton gave bond strength favorable compared to that of industrial epoxy. Based on limited pull test data, Kapton bonded and CWL-152 bonded samples showed poor strength compared to epoxy bonded sample.

Superconducting technology for overcurrent limiting in a 25 kA current injection system

NASA Astrophysics Data System (ADS)

Heydari, Hossein; Faghihi, Faramarz; Sharifi, Reza; Poursoltanmohammadi, Amir Hossein

2008-09-01

Current injection transformer (CIT) systems are within the major group of the standard type test of high current equipment in the electrical industry, so their performance becomes very important. When designing high current systems, there are many factors to be considered from which their overcurrent protection must be ensured. The output of a CIT is wholly dependent on the impedance of the equipment under test (EUT). Therefore current flow beyond the allowable limit can occur. The present state of the art provides an important guide to developing current limiters not only for the grid application but also in industrial equipment. This paper reports the state of the art in the technology available that could be developed into an application of superconductivity for high current equipment (CIT) protection with no test disruption. This will result in a greater market choice and lower costs for equipment protection solutions, reduced costs and improved system reliability. The paper will also push the state of the art by using two distinctive circuits, closed-core and open-core, for overcurrent protection of a 25 kA CIT system, based on a flux-lock-type superconducting fault current limiter (SFCL) and magnetic properties of high temperature superconducting (HTS) elements. An appropriate location of the HTS element will enhance the rate of limitation with the help of the magnetic field generated by the CIT output busbars. The calculation of the HTS parameters for overcurrent limiting is also performed to suit the required current levels of the CIT.

Modified SPC for short run test and measurement process in multi-stations

NASA Astrophysics Data System (ADS)

Koh, C. K.; Chin, J. F.; Kamaruddin, S.

2018-03-01

Due to short production runs and measurement error inherent in electronic test and measurement (T&M) processes, continuous quality monitoring through real-time statistical process control (SPC) is challenging. Industry practice allows the installation of guard band using measurement uncertainty to reduce the width of acceptance limit, as an indirect way to compensate the measurement errors. This paper presents a new SPC model combining modified guard band and control charts (\\bar{\\text{Z}} chart and W chart) for short runs in T&M process in multi-stations. The proposed model standardizes the observed value with measurement target (T) and rationed measurement uncertainty (U). S-factor (S f) is introduced to the control limits to improve the sensitivity in detecting small shifts. The model was embedded in automated quality control system and verified with a case study in real industry.

First impression versus extended usage: a comparison of product testing methodologies for perfume.

PubMed

Shalofsky, I

1993-04-01

Synopsis In the fine fragrance industry, unlike many other fast moving consumer goods (fmcg) industries, systematic consumer product-testing has usually been conspicuous by its absence. The reasons are varied, including perfume's own traditions rooted in fashion rather than in marketing, the reluctance of perfumers to see their creations tested, the frequently (and perhaps, surprisingly) short lead times accorded for new product development and, of course, costs. When consumer product-testing is carried out, it is often limited for these same reasons, to 'sniff-testing', which, in the perfume industry, is equivalent to 'first impression' testing. This paper suggests that such sniff-testing may not only be unreliable, but perhaps more unreliable for the perfume category than has been realized hitherto. Reference is made to two consumer research studies on perfume, a qualitative project in France, followed by a quantitative exercise in the UK. A comparison is made between in-home test and sniff-test results for the same set of perfumes, which illustrates the limitations of sniff-testing in general, and the misleading results that it may produce, in particular. A major implication is that perfume is one product category which should be tested in extended usage, and not just for 'first impressions'. Résumé Dans l'industrie de la parfumerie fine, contrairement aux autres industries de produits de grande consommation, les tests consommateurs systématiques sont rarement utilisés. Les raisons sont diverses; les traditions propres du parfum tournées vers la mode plutôt que vers le marketing, le refus des parfumeurs de voir leurs créations subir des tests, les délais étonnamment courts pour le développement d'un nouveau produit et, bien sûr, le coût. Lorsqu'un test consommateurs est effectué, il se résume généralement pour ces mêmes raisons, en un test 'sniff', ce qui, dans l'industrie du parfum équivaut à un test de 'première impression'. Cet article montre que ces tests 'sniff' sont encore moins fiables pour le parfum que l'on avait pensé jusqu'à maintenant. Il est fait référence à deux tests consommateurs sur le parfum, un projet qualitatif en France, suivi par un exercice quantitatif effectué en Grande Bretagne. La comparaison entre les tests réalisés à domicile d'une part, et en sale d'autre part, montre que, pour les mêmes parfums, les résultats obtenus peuvent être erronés. Une des conclusions principales est que le parfum est un produit qui devrait être testé sur une longue période et non pas sur une première impression.

40 CFR 62.14685 - May I conduct a repeat performance test to establish new operating limits?

Code of Federal Regulations, 2011 CFR

2011-07-01

... DESIGNATED FACILITIES AND POLLUTANTS Federal Plan Requirements for Commercial and Industrial Solid Waste Incineration Units That Commenced Construction On or Before November 30, 1999 Continuous Compliance...

40 CFR 62.14685 - May I conduct a repeat performance test to establish new operating limits?

Code of Federal Regulations, 2010 CFR

2010-07-01

... DESIGNATED FACILITIES AND POLLUTANTS Federal Plan Requirements for Commercial and Industrial Solid Waste Incineration Units That Commenced Construction On or Before November 30, 1999 Continuous Compliance...

Naval Research Laboratory Industrial Chemical Analysis and Respiratory Filter Standards Development

DTIC Science & Technology

2017-09-29

Filter Standards Development September 29, 2017 Approved for public release; distribution is unlimited. Thomas E. suTTo Materials and Systems Branch...LIMITATION OF ABSTRACT Naval Research Laboratory Industrial Chemical Analysis and Respiratory Filter Standards Development Thomas E. Sutto Naval Research...approach, developed by NRL, is tested by examining the filter behavior against a number of chemicals to determine if the NRL approach resulted in the

Characterization of composting mixtures and compost of rabbit by-products to obtain a quality product and plant proposal for industrial production.

PubMed

Bianchi, Biagio; Papajova, Ingrid; Tamborrino, Rosanna; Ventrella, Domenico; Vitti, Carolina

2015-01-01

In this study we have observed the effects of using rabbit manure and slaughtering by-products in a composting process. Three piles of this material, 4700 kg each, with different amount and C/N ratio, have been investigated and experimental tests were carried out in an industrial horizontal axe reactor using a prototype of turning machine. The composting time lasted 85 days; 2 experimental cycles were conducted: one in Winter and one in Summer. In the Winter test, mesophilic reaction started only in the control mixture (animal manure + slaughtering by-products without straw). It is noteworthy that, the 3 investigated mixtures produced soil amendment by compost with good agronomical potential but with parameters close to the extreme limits of the law. In the Summer test, there was thermophilic fermentation in all mixtures and a better quality compost was obtained, meeting all the agronomic and legislative constraints. For each pile, we examined the progression of fermentation process and thus the plant limitations that did not allow a correct composting process. The results obtained in this study are useful for the development of appropriate mixtures, machines, and plants assuring continuance and reliability in the composting of the biomass coming from rabbit industry.

Promising developments and biometric testing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Holmes, J.P.

1993-04-01

Biometric identity research and development activities are being conducted in universities, government, and private industry. This paper discusses some of the factors that limit the performance of biometric identity devices, looks at some new developments, and speculates on future developments.

Solidification and stabilization of the incinerated wastewater sludge from textile industry

NASA Astrophysics Data System (ADS)

Aziz, Hamidi Abdul; Ghazali, Miskiah Fadzilah; Omran, Abdelnaser; Umar, Muhammad

2017-10-01

This paper describes the investigation of solidification and stabilization (S/S) process for the safe disposal of incinerated wastewater sludge produced from a textile industry in Penang, Malaysia. Physical and chemical properties of the samples were first characterized. Various ratios of ordinary Portland cement (OPC) as a binder were used to immobilize the metals. The leachability of metals in these cement-based waste materials was studied by standard toxicity characteristic leaching procedure (TCLP) and the mechanical strength was tested by a compressive strength test. TCLP results showed the ability of OPC to immobilize various metals such as Zn, Cu, Fe, Al, Ti, and K within the limits set by USEPA and Malaysia Environment Quality Act, 1974. However, the strength of the solidified matrixes was generally lower than the control specimens, ranging from 1-23 Mpa, which was well above the specified limit of 414 kPa for such matrices for their disposal in landfills.

[An analysis of occupational hazard in manufacturing industry in Guangzhou, China, in 2013].

PubMed

Zhang, Haihong; Li, Yongqin; Zhou, Hailin; Rong, Xing; Zhu, Shaofang; He, Yinan; Zhai, Ran; Liu, Yiming

2015-08-01

To provide data for the occupational health supervision by analyzing the occupational health status in manufacturing industry in Guangzhou, China. The occupational health investigation was performed in 280 enterprises randomly selected from 8 industries based on industry stratification. According to the occupational health standards, 198 out of the 280 enterprises were supervised and monitored. Sample testing was performed in 3~5 workplaces where workers were exposed to the highest concentration/intensity of occupational hazard for the longest time. Comparative analyses of the overproof rates of hazard were performed among enterprises, workplaces, and testing items from different industries. The concentrations of occupational hazard in 42.93% (85/198) of enterprises and 22.96% (200/871) of workplaces were above the limit concentration. The most severe hazards were the noises in shipbuilding and wooden furniture industries and the welding fumes in shipbuilding industry. Less than 30% of enterprises were able to provide occupational health examination and periodic test reports of occupational hazard in workplaces. The rate of the workers with abnormal occupational health examination results and the need for reexamination reached 6.63% (832/12 549), and they were mostly from shipbuilding, wooden furniture, and chemical industries. The occupational health supervision should be strengthened in enterprises, and hazard from noises and dusts should be selectively controlled or reduced. The publication of relevant data and information of occupational health in enterprises should be promoted to enhance social supervision.

Pilot testing a methodology to measure the marginal increase in economic impact of rural tourism sites

Treesearch

April Evans; Hans Vogelsong

2008-01-01

Rural tourism is a rapidly expanding industry which holds some promise of improving the economy in small towns and farming regions. However, rural communities have limited funding available for promotional efforts. To understand if limited funds are effective in producing the desired economic impacts, it is important that rural communities evaluate their promotional...

Term limits and the tobacco industry.

PubMed

Apollonio, Dorie E; Glantz, Stanton A; Bero, Lisa A

2014-03-01

In the 1990s several American states passed term limits on legislators with the stated intention of reducing the influence of wealthy industries on career legislators. Although term limits in the United States do not have a direct relationship to public health, the tobacco industry anticipated that term limits could have indirect effects by either limiting or expanding industry influence. We detail the strategy of the tobacco industry in the wake of term limits using internal tobacco company documents and a database of campaign contributions made to legislators in term limited states between 1988 and 2002. Despite some expectations that term limits would limit tobacco industry access to state legislators, term limits appear to have had the opposite effect. Copyright © 2013 Elsevier Ltd. All rights reserved.

Secret science: tobacco industry research on smoking behaviour and cigarette toxicity.

PubMed

Hammond, David; Collishaw, Neil E; Callard, Cynthia

2006-03-04

A lack of scientific data remains the principal obstacle to regulating cigarette toxicity. In particular, there is an immediate need to improve our understanding of the interaction between smoking behaviour and product design, and its influence on cigarette deliveries. This article reviews internal tobacco industry documents on smoking behaviour research undertaken by Imperial Tobacco Limited (ITL) and British-American Tobacco (BAT). BAT documents indicate that smokers vary their puffing behaviour to regulate nicotine levels and compensate for low-yield cigarettes by smoking them more intensely. BAT research also shows that the tar and nicotine delivered to smokers is substantially greater than the machine-smoked yields reported to consumers and regulators. Internal documents describe a strategy to maximise this discrepancy through product design. In particular, BAT developed elastic cigarettes that produced low yields under standard testing protocols, whereas in consumers' hands they elicited more intensive smoking and provided higher concentrations of tar and nicotine to smokers. Documents also show that BAT pursued this product strategy despite the health risks to consumers and ethical concerns raised by senior scientists, and paired it with an equally successful marketing campaign that promoted these cigarettes as low-tar alternatives for health-concerned smokers. Overall, the documents seem to reveal a product strategy intended to exploit the limitations of the testing protocols and to intentionally conceal from consumers and regulators the potential toxicity of BAT products revealed by BAT's own research. Tobacco industry research underscores the serious limitations of the current cigarette testing protocols and the documents describe deceptive business practices that remain in place.

The plane strain shear fracture of the advanced high strength steels

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sun, Li, E-mail: li.sun@gm.com

2013-12-16

The “shear fracture” which occurs at the high-curvature die radii in the sheet metal forming has been reported to remarkably limit the application of the advanced high strength steels (AHSS) in the automobile industry. However, this unusual fracture behavior generally cannot be predicted by the traditional forming limit diagram (FLD). In this research, a new experimental system was developed in order to simulate the shear fracture, especially at the plane strain state which is the most common state in the auto-industry and difficult to achieve in the lab due to sample size. Furthermore, the system has the capability to operatemore » in a strain rate range from quasi-static state to the industrial forming state. One kinds of AHSS, Quenching-Partitioning (QP) steels have been performed in this test and the results show that the limiting fracture strain is related to the bending ratio and strain rate. The experimental data support that deformation-induced heating is an important cause of “shear fracture” phenomena for AHSS: a deformation-induced quasi-heating caused by smaller bending ratio and high strain rate produce a smaller limiting plane strain and lead a “shear fracture” in the component.« less

Monitoring of Wind Turbine Gearbox Condition through Oil and Wear Debris Analysis: A Full-Scale Testing Perspective

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sheng, Shuangwen

Despite the wind industry's dramatic development during the past decade, it is still challenged by premature turbine subsystem/component failures, especially for turbines rated above 1 MW. Because a crane is needed for each replacement, gearboxes have been a focal point for improvement in reliability and availability. Condition monitoring (CM) is a technique that can help improve these factors, leading to reduced turbine operation and maintenance costs and, subsequently, lower cost of energy for wind power. Although technical benefits of CM for the wind industry are normally recognized, there is a lack of published information on the advantages and limitations ofmore » each CM technique confirmed by objective data from full-scale tests. This article presents first-hand oil and wear debris analysis results obtained through tests that were based on full-scale wind turbine gearboxes rated at 750 kW. The tests were conducted at the 2.5-MW dynamometer test facility at the National Wind Technology Center at the National Renewable Energy Laboratory. The gearboxes were tested in three conditions: run-in, healthy, and damaged. The investigated CM techniques include real-time oil condition and wear debris monitoring, both inline and online sensors, and offline oil sample and wear debris analysis, both onsite and offsite laboratories. The reported results and observations help increase wind industry awareness of the benefits and limitations of oil and debris analysis technologies and highlight the challenges in these technologies and other tribological fields for the Society of Tribologists and Lubrication Engineers and other organizations to help address, leading to extended gearbox service life.« less

Purification of pulp and paper mill effluent using Eichornia crassipes.

PubMed

Yedla, S; Mitra, A; Bandyopadhyay, M

2002-04-01

Konark Pulp and Paper Industries Private Limited is a medium size industry producing 1600 m3 of wastewater a day. The existing water treatment system of the industry was found to be ineffective both in performance and economy. In the present study, a new system of treatment has been developed using water hyacinth Eichornia crassipes, coagulation by lime and alum, followed by rapid sand filtration. The performance efficiency of each unit viz. Eichornia treatment; coagulation with lime, with alum, and with lime:alum combinations, and filtration was studied. Water quality parameters considered were Biological Oxygen Demand, Chemical Oxygen Demand, Dissolve Oxygen, Total Dissolved Solids, turbidity, percentage transmission, and water colour. Based on the individual performance of each unit, a continuous system has been designed and was tested. The new system of treatment could treat the wastewater to the discharge standards and also was found economically feasible. Testing culture of fish (tilapia) proved that the treated water could be safely discharged into natural waters. All fish tested, survived and remained healthy throughout the period of testing. Culture of fish further improved the water quality.

Plenary Round Table: The Main Challenges of Space Propulsion Industry for the Coming Ten Years

NASA Technical Reports Server (NTRS)

Wood, Byron K.; Hopson, George (Technical Monitor)

2002-01-01

This viewgraph presentation provides limited information on the Space Shuttle Main Engine. Topics covered include reusability levels for individual parts, the relation between the number of certification tests and average risk factor for first flights.

Bridging the gap between regulatory acceptance and industry use of non-animal methods.

PubMed

Clippinger, Amy J; Hill, Erin; Curren, Rodger; Bishop, Patricia

2016-01-01

Collaboration between industry and regulators resulted in the development of a decision tree approach using in vitro or ex vivo assays to replace animal tests when determining the eye irritation potential of antimicrobial cleaning products (AMCPs) under the United States Environmental Protection Agency (EPA) Office of Pesticide Programs' hazard classification and labeling system. A policy document issued by the EPA in 2013 and updated in 2015 describes the alternate testing framework that industry could apply to new registrations of AMCPs and, on a case-by-case basis, to conventional pesticide products. Despite the collaborative effort, the availability of relevant non-animal methods, and the EPA's change in policy, only a limited number of AMCPs have been registered using the framework. Companies continue to conduct animal tests when registering AMCPs due to various challenges surrounding adoption of the new testing framework; however, recent discussions between industry, regulators, and other interested parties have identified ways these challenges may be overcome. In this article we explore how use of the alternate framework could be expanded through efforts such as increasing international harmonization, more proactively publicizing the framework, and enhancing the training of regulatory reviewers. Not only can these strategies help to increase use of the EPA alternate eye irritation framework, they can also be applied to facilitate the uptake of other alternative approaches to animal testing in the future.

The Use of Physarum for Testing of Toxicity/Mutagenicity

DTIC Science & Technology

1984-04-19

grade and sup- pliers were as follows: ethanol, U.S. Industrial Co.; hydrazine dihydrochloride Fisher Chemical Co.; hydrocarbons, Alltech Co. and Theta...procedure had its own particular advantages and limitations. The microplasmodial growth inhibition system (Becker et al., 1963) was convenient because it

Pet Food Palatability Evaluation: A Review of Standard Assay Techniques and Interpretation of Results with a Primary Focus on Limitations

PubMed Central

Aldrich, Gregory C.; Koppel, Kadri

2015-01-01

Simple Summary Palatability of pet foods is typically measured using a single-bowl or a two-bowl test. While these tests give a general understanding of the liking or preference of one food over another, opportunities exist for further method development. Abstract The pet food industry continues to grow steadily as a result of new innovative products. Quality control and product development tests for pet foods are typically conducted through palatability testing with dogs and cats. Palatability is the measure of intake of a food that indicates acceptance or the measure of preference of one food over another. Pet food palatability is most commonly measured using a single-bowl or a two-bowl assay. While these tests answer some questions about the animals’ perception of the food, there are many limitations as well. This review addresses some of these limitations and indicates opportunities for future research. PMID:26479136

Experimental formability analysis of bondal sandwich sheet

NASA Astrophysics Data System (ADS)

Kami, Abdolvahed; Banabic, Dorel

2018-05-01

Metal/polymer/metal sandwich sheets have recently attracted the interests of industries like automotive industry. These sandwich sheets have superior properties over single-layer metallic sheets including good sound and vibration damping and light weight. However, the formability of these sandwich sheets should be enhanced which requires more research. In this paper, the formability of Bondal sheet (DC06/viscoelastic polymer/DC06 sandwich sheet) was studied through different types of experiments. The mechanical properties of Bondal were determined by uniaxial tensile tests. Hemispherical punch stretching and hydraulic bulge tests were carried out to determine the forming limit diagram (FLD) of Bondal. Furthermore, cylindrical and square cup drawing tests were performed in dry and oil lubricated conditions. These tests were conducted at different blank holding forces (BHFs). An interesting observation about Bondal sheet deep drawing was obtaining of higher drawing depths at dry condition in comparison with oil-lubricated condition.

Industry's View on Using Quality Control, Biorelevant, and Clinically Relevant Dissolution Tests for Pharmaceutical Development, Registration, and Commercialization.

PubMed

Grady, Haiyan; Elder, David; Webster, Gregory K; Mao, Yun; Lin, Yiqing; Flanagan, Talia; Mann, James; Blanchard, Andy; Cohen, Michael J; Lin, Judy; Kesisoglou, Filippos; Hermans, Andre; Abend, Andreas; Zhang, Limin; Curran, David

2018-01-01

This article intends to summarize the current views of the IQ Consortium Dissolution Working Group, which comprises various industry companies, on the roles of dissolution testing throughout pharmaceutical product development, registration, commercialization, and beyond. Over the past 3 decades, dissolution testing has evolved from a routine and straightforward test as a component of end-product release into a comprehensive set of tools that the developer can deploy at various stages of the product life cycle. The definitions of commonly used dissolution approaches, how they relate to one another and how they may be applied in modern drug development, and life cycle management is described in this article. Specifically, this article discusses the purpose, advantages, and limitations of quality control, biorelevant, and clinically relevant dissolution methods. Copyright © 2018 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.

The Impact on DoD of the Toxic Substances Control Act

DTIC Science & Technology

1980-06-01

reconcile a limit of 10 ppm in the gasoline area where there is a potential for 400,000 exposures while in the rubber industry the potential is only 150,000...that the Ames test and other mutagenic tests are predictive of tumor producing potential. Many of us in toxi - cology are not impressed with this...also be completely different; so much for generic toxi - cology and for the possibility that short term testing for mutagenic effects is predictive of

Toxicity assessment of industrial chemicals and airborne contaminants: transition from in vivo to in vitro test methods: a review.

PubMed

Bakand, S; Winder, C; Khalil, C; Hayes, A

2005-12-01

Exposure to occupational and environmental contaminants is a major contributor to human health problems. Inhalation of gases, vapors, aerosols, and mixtures of these can cause a wide range of adverse health effects, ranging from simple irritation to systemic diseases. Despite significant achievements in the risk assessment of chemicals, the toxicological database, particularly for industrial chemicals, remains limited. Considering there are approximately 80,000 chemicals in commerce, and an extremely large number of chemical mixtures, in vivo testing of this large number is unachievable from both economical and practical perspectives. While in vitro methods are capable of rapidly providing toxicity information, regulatory agencies in general are still cautious about the replacement of whole-animal methods with new in vitro techniques. Although studying the toxic effects of inhaled chemicals is a complex subject, recent studies demonstrate that in vitro methods may have significant potential for assessing the toxicity of airborne contaminants. In this review, current toxicity test methods for risk evaluation of industrial chemicals and airborne contaminants are presented. To evaluate the potential applications of in vitro methods for studying respiratory toxicity, more recent models developed for toxicity testing of airborne contaminants are discussed.

neutron-Induced Failures in semiconductor Devices

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wender, Stephen Arthur

2017-03-13

Single Event Effects are a very significant failure mode in modern semiconductor devices that may limit their reliability. Accelerated testing is important for semiconductor industry. Considerable more work is needed in this field to mitigate the problem. Mitigation of this problem will probably come from Physicists and Electrical Engineers working together

Being There: (Re)Making the Assessment Scene

ERIC Educational Resources Information Center

Gallagher, Chris W.

2011-01-01

I use Burkean analysis to show how neoliberalism undermines faculty assessment expertise and underwrites testing industry expertise in the current assessment scene. Contending that we cannot extricate ourselves from our limited agency in this scene until we abandon the familiar "stakeholder" theory of power, I propose a rewriting of the…

Influence of mean stress on fatigue strength of ferritic-pearlite ductile cast iron with small defects

NASA Astrophysics Data System (ADS)

Deguchi, T.; Kim, H. J.; Ikeda, T.; Yanase, K.

2017-05-01

Because of their excellent mechanical properties, low cost and good workability, the application of ductile cast iron has been increased in various industries such as the automotive, construction and rail industries. For safety designing of the ductile cast iron component, it is necessary to understand the effect of stress ratio, R, on fatigue limit of ductile cast iron in the presence of small defects. Correspondingly in this study, rotating bending fatigue tests at R = -1 and tension-compression fatigue tests at R = -1 and 0.1 were performed by using a ferritic-pearlitic ductile cast iron. To study the effects of small defects, we introduced a small drilled hole at surface of a specimen. The diameter and depth of a drilled hole were 50, 200 and 500 μm, respectively. The non-propagating cracks emanating from graphite particles and holes edge were observed at fatigue limit, irrespective of the value of stress ratio. From the microscopic observation of crack propagation behavior, it can be concluded that the fatigue limit is determined by the threshold condition for propagation of a small crack. It was found that the effect of stress ratio on the fatigue limit of ductile cast iron with small defects can be successfully predicted based on \\sqrt {area} parameter model. Furthermore, a use of the tensile strength, σ B, instead of the Vickers hardness, HV, is effective for fatigue limit prediction.

High-Throughput Toxicity Testing: New Strategies for ...

EPA Pesticide Factsheets

In recent years, the food industry has made progress in improving safety testing methods focused on microbial contaminants in order to promote food safety. However, food industry toxicologists must also assess the safety of food-relevant chemicals including pesticides, direct additives, and food contact substances. With the rapidly growing use of new food additives, as well as innovation in food contact substance development, an interest in exploring the use of high-throughput chemical safety testing approaches has emerged. Currently, the field of toxicology is undergoing a paradigm shift in how chemical hazards can be evaluated. Since there are tens of thousands of chemicals in use, many of which have little to no hazard information and there are limited resources (namely time and money) for testing these chemicals, it is necessary to prioritize which chemicals require further safety testing to better protect human health. Advances in biochemistry and computational toxicology have paved the way for animal-free (in vitro) high-throughput screening which can characterize chemical interactions with highly specific biological processes. Screening approaches are not novel; in fact, quantitative high-throughput screening (qHTS) methods that incorporate dose-response evaluation have been widely used in the pharmaceutical industry. For toxicological evaluation and prioritization, it is the throughput as well as the cost- and time-efficient nature of qHTS that makes it

Bioassessment of the Effluents Discharged from Two Export Oriented Industrial Zones Located in Kelani River Basin, Sri Lanka Using Erythrocytic Responses of the Fish, Nile Tilapia (Oreochromis niloticus).

PubMed

Hemachandra, C K; Pathiratne, A

2017-10-01

Complex effluents originating from diverse industrial processes in industrial zones could pose cytotoxic/genotoxic hazards to biota in the receiving ecosystems which cannot be revealed by conventional monitoring methods. This study assessed potential cytotoxicity/genotoxicity of treated effluents of two industrial zones which are discharged into Kelani river, Sri Lanka combining erythrocytic abnormality tests and comet assay of the tropical model fish, Nile tilapia. Exposure of fish to the effluents induced erythrocytic DNA damage and deformed erythrocytes with serrated membranes, vacuolations, nuclear buds and micronuclei showing cytotoxic/genotoxic hazards in all cases. Occasional exceedance of industrial effluent discharge regulatory limits was noted for color and lead which may have contributed to the observed cytotoxicity/genotoxicity of effluents. The results demonstrate that fish erythrocytic responses could be used as effective bioanalytical tools for cytotoxic/genotoxic hazard assessments of complex effluents of industrial zones for optimization of the waste treatment process in order to reduce biological impacts.

Proposed Objective Odor Control Test Methodology for Waste Containment

NASA Technical Reports Server (NTRS)

Vos, Gordon

2010-01-01

The Orion Cockpit Working Group has requested that an odor control testing methodology be proposed to evaluate the odor containment effectiveness of waste disposal bags to be flown on the Orion Crew Exploration Vehicle. As a standardized "odor containment" test does not appear to be a matter of record for the project, a new test method is being proposed. This method is based on existing test methods used in industrial hygiene for the evaluation of respirator fit in occupational settings, and takes into consideration peer reviewed documentation of human odor thresholds for standardized contaminates, industry stardnard atmostpheric testing methodologies, and established criteria for laboratory analysis. The proposed methodology is quantitative, though it can readily be complimented with a qualitative subjective assessment. Isoamyl acetate (IAA - also known at isopentyl acetate) is commonly used in respirator fit testing, and there are documented methodologies for both measuring its quantitative airborne concentrations. IAA is a clear, colorless liquid with a banana-like odor, documented detectable smell threshold for humans of 0.025 PPM, and a 15 PPB level of quantation limit.

78 FR 16777 - Export Sales Reporting Requirements

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-19

... DDG] would facilitate market transparency and allow our industry and our corn marketing partners with... commodities to be used for seed which have been treated in such a manner that their use is limited to seed for planting purposes or on which a certificate has been issued by a recognized seed testing laboratory setting...

Settlement of the alien mollusc Brachidontes pharaonis in a Mediterranean industrial plant: bioassays for antifouling treatment optimization and management.

PubMed

Garaventa, F; Corrà, C; Piazza, V; Giacco, E; Greco, G; Pane, L; Faimali, M

2012-05-01

In this work, we investigated the efficacy of three new biocides (77351, 73532, 73503--NALCO®) as specific antifouling products against adult organisms of the bivalve Brachidontes pharaonis (Fischer P., 1870), a Lessepsian species introduced in the Mediterranean Sea by sea transport (ballast water), and which has recently shown invasive behaviour in an industrial plant in Southern Italy (Sicily). These biocides were tested to verify their efficacy, as well as their environmental compatibility at discharge point, using the crustacean belonging to the genus Artemia (Leach, 1819) as model organism, according to Government Decree (D. Lgs) No. 152/06. Biocides were also tested using alternative crustaceans, Amphibalanus amphitrite (Darwin, 1854), and Tigriopus fulvus (Fischer, 1860), in order to check whether their introduction as model species in the national regulation could affect discharge limit concentrations (DLC) due to their different sensitivity, with likely economic and technical repercussions in the industrial water treatment sector. Copyright © 2011 Elsevier Ltd. All rights reserved.

Genetics and Insurance in Australia: Concerns around a Self-Regulated Industry.

PubMed

Newson, Ainsley J; Tiller, Jane; Keogh, Louise A; Otlowski, Margaret; Lacaze, Paul

2017-01-01

Regulating the use of genetic information in insurance is an issue of ongoing international debate. In Australia, providers of life and other mutually rated insurance products can request applicants to disclose all results from any genetic test. Insurers can then use this information to adjust premiums and make policy decisions. The Australian Financial Services Council (FSC; an industry body) developed and maintains the relevant industry standard, which was updated in late 2016. Aims/Objective: To review the 2016 FSC Standard in light of relevant research and determine the legitimacy of the Australian regulatory environment regarding use of genetic information by insurers. We identified five concerns arising from the 2016 FSC Standard: (1) use of results obtained from research; (2) the requirement for an applicant to disclose whether they are "considering" a genetic test; (3) failure to account for genome sequencing and other technology developments; (4) limited evidence regarding adverse selection; and (5) the inappropriateness of industry self-regulation. Industry self-regulation of the use of genetic information by life insurers, combined with a lack of government oversight, is inappropriate and threatens to impede the progress of genomic medicine in Australia. At this critical time, Australia requires closer government oversight of the use of genetic information in insurance. © 2017 S. Karger AG, Basel.

Integration of microalgae cultivation with industrial waste remediation for biofuel and bioenergy production: opportunities and limitations.

PubMed

McGinn, Patrick J; Dickinson, Kathryn E; Bhatti, Shabana; Frigon, Jean-Claude; Guiot, Serge R; O'Leary, Stephen J B

2011-09-01

There is currently a renewed interest in developing microalgae as a source of renewable energy and fuel. Microalgae hold great potential as a source of biomass for the production of energy and fungible liquid transportation fuels. However, the technologies required for large-scale cultivation, processing, and conversion of microalgal biomass to energy products are underdeveloped. Microalgae offer several advantages over traditional 'first-generation' biofuels crops like corn: these include superior biomass productivity, the ability to grow on poor-quality land unsuitable for agriculture, and the potential for sustainable growth by extracting macro- and micronutrients from wastewater and industrial flue-stack emissions. Integrating microalgal cultivation with municipal wastewater treatment and industrial CO(2) emissions from coal-fired power plants is a potential strategy to produce large quantities of biomass, and represents an opportunity to develop, test, and optimize the necessary technologies to make microalgal biofuels more cost-effective and efficient. However, many constraints on the eventual deployment of this technology must be taken into consideration and mitigating strategies developed before large scale microalgal cultivation can become a reality. As a strategy for CO(2) biomitigation from industrial point source emitters, microalgal cultivation can be limited by the availability of land, light, and other nutrients like N and P. Effective removal of N and P from municipal wastewater is limited by the processing capacity of available microalgal cultivation systems. Strategies to mitigate against the constraints are discussed.

Association of industry sponsorship and positive outcome in randomised controlled trials in general and abdominal surgery: protocol for a systematic review and empirical study.

PubMed

Probst, Pascal; Grummich, Kathrin; Ulrich, Alexis; Büchler, Markus W; Knebel, Phillip; Diener, Markus K

2014-11-27

Industry sponsorship has been identified as a factor correlating with positive research findings in several fields of medical science. To date, the influence of industry sponsorship in general and abdominal surgery has not been fully studied. This protocol describes the rationale and planned conduct of a systematic review to determine the association between industry sponsorship and positive outcome in randomised controlled trials in general and abdominal surgery. A literature search in the Cochrane Library, MEDLINE and EMBASE and additional hand searches in relevant citations will be conducted. In order to cover all relevant areas of general and abdominal surgery, a new literature search strategy called multi-PICO search strategy (MPSS) has been developed. No language restriction will be applied. The search will be limited to publications between January 1985 and July 2014. Information on funding source, outcome, study characteristics and methodological quality will be extracted.The association between industry sponsorship and positive outcome will be tested by a chi-squared test. A multivariate logistic regression analysis will be performed to control for possible confounders, such as number of study centres, multinational trials, methodological quality, journal impact factor and sample size. This study was designed to clarify whether industry-sponsored trials report more positive outcomes than non-industry trials. It will be the first study to evaluate this topic in general and abdominal surgery. The findings of this study will enable surgical societies, in particular, to give advice about cooperation with the industry and disclosure of funding source based on empirical evidence. PROSPERO CRD42014010802.

NASA/aircraft industry standard specification for graphite fiber toughened thermoset resin composite material

NASA Technical Reports Server (NTRS)

1985-01-01

A standard specification for a selected class of graphite fiber/toughened thermoset resin matrix material was developed through joint NASA/Aircraft Industry effort. This specification was compiled to provide uniform requirements and tests for qualifying prepreg systems and for acceptance of prepreg batches. The specification applies specifically to a class of composite prepreg consisting of unidirectional graphite fibers impregnated with a toughened thermoset resin that produce laminates with service temperatures from -65 F to 200 F when cured at temperatures below or equal to 350 F. The specified prepreg has a fiber areal weight of 145 g sq m. The specified tests are limited to those required to set minimum standards for the uncured prepreg and cured laminates, and are not intended to provide design allowable properties.

77 FR 42954 - Airworthiness Directives; Boeing Vertol (Type Certificate Currently Held by Columbia Helicopters...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-23

...)) and Kawasaki Heavy Industries, Limited Helicopters (Kawasaki) AGENCY: Federal Aviation Administration... Columbia Helicopters, Inc.) and Kawasaki Heavy Industries, Limited Helicopters: Amendment 39-17124; Docket... Heavy Industries, Limited Model KV107-II and KV107-IIA helicopters with an upper collective pitch...

The method of planning the energy consumption for electricity market

NASA Astrophysics Data System (ADS)

Russkov, O. V.; Saradgishvili, S. E.

2017-10-01

The limitations of existing forecast models are defined. The offered method is based on game theory, probabilities theory and forecasting the energy prices relations. New method is the basis for planning the uneven energy consumption of industrial enterprise. Ecological side of the offered method is disclosed. The program module performed the algorithm of the method is described. Positive method tests at the industrial enterprise are shown. The offered method allows optimizing the difference between planned and factual consumption of energy every hour of a day. The conclusion about applicability of the method for addressing economic and ecological challenges is made.

On Limitations of the Ultrasonic Characterization of Pieces Manufactured with Highly Attenuating Materials

NASA Astrophysics Data System (ADS)

Ramos, A.; Moreno, E.; Rubio, B.; Calas, H.; Galarza, N.; Rubio, J.; Diez, L.; Castellanos, L.; Gómez, T.

Some technical aspects of two Spanish cooperation projects, funded by DPI and Innpacto Programs of the R&D National Plan, are discussed. The objective is to analyze the common belief about than the ultrasonic testing in MHz range is not a tool utilizable to detect internal flaws in highly attenuating pieces made of coarse-grained steel. In fact high-strength steels, used in some safe industrial infrastructures of energy & transport sectors, are difficult to be inspected using the conventional "state of the art" in ultrasonic technology, due to their internal microstructures are very attenuating and coarse-grained. It is studied if this inspection difficulty could be overcome by finding intense interrogating pulses and advanced signal processing of the acquired echoes. A possible solution would depend on drastically improving signal-to-noise-ratios, by applying new advances on: ultrasonic transduction, HV electronics for intense pulsed driving of the testing probes, and an "ad-hoc" digital processing or focusing of the received noisy signals, in function of each material to be inspected. To attain this challenging aim on robust steel pieces would open the possibility of obtaining improvements in inspecting critical industrial components made of highly attenuating & dispersive materials, as new composites in aeronautic and motorway bridges, or new metallic alloys in nuclear area, where additional testing limitations often appear.

Integrated process for the removal of emulsified oils from effluents in the steel industry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Benito, J.M.; Rios, G.; Gutierrez, B.

1999-11-01

Emulsified oils contained in aqueous effluents from cold-rolling mills of the steel industry can be effectively removed via an integrated process consisting of a coagulation/flocculation stage followed by ultrafiltration of the resulting aqueous phase. The effects of CaCl{sub 2}, NaOH, and lime on the stability of different industrial effluents were studied in the coagulation experiments. The flocculants tested were inorganic prehydrolyzed aluminum salts and quaternary polyamines. Ultrafiltration of the aqueous phase from the coagulation/flocculation stage was carried out in a stirred cell using Amicon PM30 and XM300 organic membranes. Permeate fluxes were measured for industrial effluents to which the indicatedmore » coagulants and flocculants had been added. Oil concentrations in the permeate were 75% lower than the limits established by all European Union countries. Complete regeneration of the membrane was accomplished with an aqueous solution of a commercial detergent.« less

Numerical Simulation And Experimental Investigation Of The Lift-Off And Blowout Of Enclosed Laminar Flames

NASA Technical Reports Server (NTRS)

Venuturmilli, Rajasekhar; Zhang, Yong; Chen, Lea-Der

2003-01-01

Enclosed flames are found in many industrial applications such as power plants, gas-turbine combustors and jet engine afterburners. A better understanding of the burner stability limits can lead to development of combustion systems that extend the lean and rich limits of combustor operations. This paper reports a fundamental study of the stability limits of co-flow laminar jet diffusion flames. A numerical study was conducted that used an adaptive mesh refinement scheme in the calculation. Experiments were conducted in two test rigs with two different fuels and diluted with three inert species. The numerical stability limits were compared with microgravity experimental data. Additional normal-gravity experimental results were also presented.

Enabling More than Moore: Accelerated Reliability Testing and Risk Analysis for Advanced Electronics Packaging

NASA Technical Reports Server (NTRS)

Ghaffarian, Reza; Evans, John W.

2014-01-01

For five decades, the semiconductor industry has distinguished itself by the rapid pace of improvement in miniaturization of electronics products-Moore's Law. Now, scaling hits a brick wall, a paradigm shift. The industry roadmaps recognized the scaling limitation and project that packaging technologies will meet further miniaturization needs or ak.a "More than Moore". This paper presents packaging technology trends and accelerated reliability testing methods currently being practiced. Then, it presents industry status on key advanced electronic packages, factors affecting accelerated solder joint reliability of area array packages, and IPC/JEDEC/Mil specifications for characterizations of assemblies under accelerated thermal and mechanical loading. Finally, it presents an examples demonstrating how Accelerated Testing and Analysis have been effectively employed in the development of complex spacecraft thereby reducing risk. Quantitative assessments necessarily involve the mathematics of probability and statistics. In addition, accelerated tests need to be designed which consider the desired risk posture and schedule for particular project. Such assessments relieve risks without imposing additional costs. and constraints that are not value added for a particular mission. Furthermore, in the course of development of complex systems, variances and defects will inevitably present themselves and require a decision concerning their disposition, necessitating quantitative assessments. In summary, this paper presents a comprehensive view point, from technology to systems, including the benefits and impact of accelerated testing in offsetting risk.

Rapid tests for diagnosis of leptospirosis: current tools and emerging technologies.

PubMed

Picardeau, Mathieu; Bertherat, Eric; Jancloes, Michel; Skouloudis, Andreas N; Durski, Kara; Hartskeerl, Rudy A

2014-01-01

Leptospirosis is an emerging zoonosis with a worldwide distribution but is more commonly found in impoverished populations in developing countries and tropical regions with frequent flooding. The rapid detection of leptospirosis is a critical step to effectively manage the disease and to control outbreaks in both human and animal populations. Therefore, there is a need for accurate and rapid diagnostic tests and appropriate surveillance and alert systems to identify outbreaks. This review describes current in-house methods and commercialized tests for the rapid diagnosis of acute leptospirosis. It focuses on diagnostic tests that can be performed with minimal training and limited equipment in less-developed and newly industrialized countries, particularly in resource-limited settings and with results in minutes to less than 4 hours. We also describe recent technological advances in the field of diagnostic tests that could allow for the development of innovative rapid tests in the near future. © 2013 Elsevier Inc. All rights reserved.

Education

DTIC Science & Technology

2004-01-01

education industry is preeminent. Conversely, limited international testing data points to an American system that might be lagging. Secretary Paige...applications of e- education include: - Enriching education opportunities for students who do not have access to quality teachers or facilities . - E...Center for Education Statistics , Mini-Digest of Education Statistics 2002 (Washington DC: US Department of Education , June 2003), p. 49. viiiNational

40 CFR 60.46b - Compliance and performance test methods and procedures for particulate matter and nitrogen oxides.

Code of Federal Regulations, 2010 CFR

2010-07-01

... and procedures for particulate matter and nitrogen oxides. 60.46b Section 60.46b Protection of... NEW STATIONARY SOURCES Standards of Performance for Industrial-Commercial-Institutional Steam... nitrogen oxides. (a) The PM emission standards and opacity limits under § 60.43b apply at all times except...

40 CFR 63.7530 - How do I demonstrate initial compliance with the emission limits and work practice standards?

Code of Federal Regulations, 2012 CFR

2012-07-01

... Pollutants for Industrial, Commercial, and Institutional Boilers and Process Heaters Testing, Fuel Analyses... 5 and 7 to this subpart OR conducting initial fuel analyses to determine emission rates and... fuel subcategories that burn only fossil fuels and other gases and do not burn any residual oil must...

Validation of an In Vitro Bioaccessability Test Method for the Estimation of the Bioavailability of Arsenic from Soil and Sediment

DTIC Science & Technology

2012-12-01

evaluate predictive performance following methods described in Malinowski et al. (1997). Acceptance criteria and control limits will be based on...69: 69–78. Malinowski , H., P. Marroum, V.R. Uppoor, et al. 1997. Draft guidance for industry extended release solid oral dosage forms. In: Young D

Electricity Production and Characterization of High-Strength Industrial Wastewaters in Microbial Fuel Cell.

PubMed

Cetinkaya, Afsin Y; Ozdemir, Oguz Kaan; Demir, Ahmet; Ozkaya, Bestami

2017-06-01

Microbial fuel cells (MFCs) convert electrochemical energy into electrical energy immediately and have a big potential usage for the same time wastewater treatment and energy recovery via electro-active microorganisms. However, MFCs must be efficiently optimized due to its limitations such as high cost and low power production. Finding new materials to increase the cell performance and reduce cost for MFC anodes is mandatory. In the first step of this study, different inoculation sludges such as anaerobic gum industry wastewater, anaerobic brewery wastewater and anaerobic phosphate were tested, and MFC that was set up with anaerobic gum industry wastewater inoculation sludge exhibited the highest performance. In the second step of this study, various wastewaters such as chocolate industry, gum industry and slaughterhouse industry were investigated for anode bacteria sources. Several electrochemical techniques have been employed to elucidate how wastewaters affect the MFCs' performance. Among all the mentioned wastewaters, the best performance was achieved by the MFCs fed with slaughterhouse wastewater; this device produced a maximum power density of 267 mW·m -2 .

Politics of corporate social control: the federal response to industrial water pollution

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yeager, P.C.

1981-01-01

In the annals of criminology and the sociology of law, the phenomenon of corporate illegalities has been seriously neglected. Moreover, the relatively few social scientific studies of illegal corporate behavior have often approached the subject from limited theoretical perspectives. These studies have generally overlooked a critical element in criminological understanding; the role of law and its administration in generating violation rates that may be said to be characteristic of the prevailing social structure. This dissertation develops an integrated theoretical approach to a type of corporate illegality, environmental pollution. In this approach, law is seen as integral to the understanding ofmore » crime, and both are situated within the broad socio-economic structure of the United States in the latter half of the 20th century. This research first reviews and analyzes the history of the federal government's efforts to control industrial water pollution, seeking to identify the social structural limits on regulatory activity. Statistical analyses of data on the federal processing of industrial pollution violations are then presented, with a view toward analyzing the correlates of both business behavior and the federal response. The analyses test a proposed model of industrial regulation, and provide important support for the perspective linking law and crime.« less

Design Engineering in Surgery. How to Design, Test and Market Surgical Devices Made With 3D Printing?

PubMed

Rodríguez García, José Ignacio; Sierra Velasco, José Manuel; Villazón Suárez, Marta; Cabrera Pereira, Ana; Sosa, Valentina; Cortizo Rodríguez, José Luis

2018-04-01

Industry 4.0 offers new development opportunities for surgeons. Computer-aided design and 3D printing allow for the creation of prototypes and functional end products. Until now, it was difficult for new devices to get to the manufacturing phase. Nowadays, the main limitations are our creativity, available spaces to test our creations and obtaining financing. Copyright © 2018 AEC. Publicado por Elsevier España, S.L.U. All rights reserved.

Toward practical 3D radiography of pipeline girth welds

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wassink, Casper, E-mail: casper.wassink@applusrtd.com; Hol, Martijn, E-mail: martijn.hol@applusrtd.com; Flikweert, Arjan, E-mail: martijn.hol@applusrtd.com

2015-03-31

Digital radiography has made its way into in-the-field girth weld testing. With recent generations of detectors and x-ray tubes it is possible to reach the image quality desired in standards as well as the speed of inspection desired to be competitive with film radiography and automated ultrasonic testing. This paper will show the application of these technologies in the RTD Rayscan system. The method for achieving an image quality that complies with or even exceeds prevailing industrial standards will be presented, as well as the application on pipeline girth welds with CRA layers. A next step in development will bemore » to also achieve a measurement of weld flaw height to allow for performing an Engineering Critical Assessment on the weld. This will allow for similar acceptance limits as currently used with Automated Ultrasonic Testing of pipeline girth welds. Although a sufficient sizing accuracy was already demonstrated and qualified in the TomoCAR system, testing in some applications is restricted to time limits. The paper will present some experiments that were performed to achieve flaw height approximation within these time limits.« less

40 CFR 49.128 - Rule for limiting particulate matter emissions from wood products industry sources.

Code of Federal Regulations, 2010 CFR

2010-07-01

... emissions from wood products industry sources. 49.128 Section 49.128 Protection of Environment ENVIRONMENTAL... Rule for limiting particulate matter emissions from wood products industry sources. (a) What is the... certain wood products industry sources operating within the Indian reservation to control ground-level...

Physico-chemical treatment of liquid waste on an industrial plant for electrocoagulation.

PubMed

Mlakar, Matej; Levstek, Marjetka; Stražar, Marjeta

2017-10-01

Wastewater from washing, oil separators, the metal processing and detergent industries, was tested and treated for treatment of different types of liquid waste at industrial level at Domžale-Kamnik Wastewater Treatment Plant (WWTP). The effect of implementing the electrocoagulation (EC) and flotation processes, respectively, is analysed and includes the duration of the EC implementation, voltage, number of electrodes, and chemical addition, as well as the pH effect and conductivity. The tests were performed not only on various types of liquid waste, but also on different mixtures of liquid waste. Laboratory analysis of the samples before and after EC have shown an effective reduction not only in organic loads in accordance with the COD (chemical oxygen demand) parameter, but also in mineral oil content, toxic metal concentration, and surfactants. The COD in liquid waste from the detergent industry was reduced by 73% and the content of surfactants by 64%. In liquid waste from the metal processing industry, the COD decreased by up to 95%, while the content of toxic metals decreased from 59 to 99%. Similar phenomena were shown in liquid waste from oil separators, where the COD was reduced to 33% and the concentration of mineral oils by 99%. Some of the liquid wastes were mixed together in the ratio 1:1, thus allowing testing of the operation of EC technology in heterogeneous liquid waste, where the final result proved to be effective cleaning as well. After treatment in the process of EC, the limit values of the treated water proved appropriate for discharge into the sewerage system.

[Determination of acrylonitrile in injection molding process: data analysis and recommendations].

PubMed

Zhong, X P; Chen, Z R; Zhu, Z L

2017-07-20

Objective: To investigate whether the identification of acrylonitrile, an occupational hazard factor for the industry of injection molding and plastic products, reported in literature is reasonable, and to put forward some recommendations. Methods: Professional articles published from 1990 to 2016 were searched, and an analysis was performed for the data on the determination of acrylonitrile in the industry of injection molding and plastic products from 2003 to 2016 in Longhua Center for Disease Control and Prevention of Shenzhen. Results: According to the literature, the detection rate of acrylonitrile was 10.7%, and the detection results did not exceed the limit. Conclusion: At present, acrylonitrile may not be used as a routine test item for the industry of injection molding and plastic products, in order to save manpower and material resources.

Status review and prospects for solar industrial process heat (SIPH)

NASA Astrophysics Data System (ADS)

Kreith, F.; Davenport, R.; Feustel, J.

1983-11-01

Solar energy systems and components are presently available for industrial process hot air, hot water, and steam applications at temperatures up to about 300 C. Systems capable of operating at temperatures up to about 1000 C are approaching commercialization. A careful matching of the characteristics of the solar system and the industrial process in question has been found by field tests to be an important determinant of the amount of useful energy that can be delivered. While the thermal performance of solar collectors is not expected to improve significantly, better manufacturing, plumbing, and installation techniques may reduce both system and delivered energy costs significantly. Tax credits for solar installations, together with limited partnership financing, can offset the high initial cost of solar energy systems and provide equity between solar and fossil-fueled systems.

Direct-to-consumer genetic testing: good, bad or benign?

PubMed

Caulfield, T; Ries, N M; Ray, P N; Shuman, C; Wilson, B

2010-02-01

A wide variety of genetic tests are now being marketed and sold in direct-to-consumer (DTC) commercial transactions. However, risk information revealed through many DTC testing services, especially those based on emerging genome wide-association studies, has limited predictive value for consumers. Some commentators contend that tests are being marketed prematurely, while others support rapid translation of genetic research findings to the marketplace. The potential harms and benefits of DTC access to genetic testing are not yet well understood, but some large-scale studies have recently been launched to examine how consumers understand and use genetic risk information. Greater consumer access to genetic tests creates a need for continuing education for health care professionals so they can respond to patients' inquiries about the benefits, risks and limitations of DTC services. Governmental bodies in many jurisdictions are considering options for regulating practices of DTC genetic testing companies, particularly to govern quality of commercial genetic tests and ensure fair and truthful advertising. Intersectoral initiatives involving government regulators, professional bodies and industry are important to facilitate development of standards to govern this rapidly developing area of personalized genomic commerce.

40 CFR 49.128 - Rule for limiting particulate matter emissions from wood products industry sources.

Code of Federal Regulations, 2013 CFR

2013-07-01

... emissions from wood products industry sources. 49.128 Section 49.128 Protection of Environment ENVIRONMENTAL... Region 10 § 49.128 Rule for limiting particulate matter emissions from wood products industry sources. (a... emitted from certain wood products industry sources operating within the Indian reservation to control...

40 CFR 49.128 - Rule for limiting particulate matter emissions from wood products industry sources.

Code of Federal Regulations, 2012 CFR

2012-07-01

... emissions from wood products industry sources. 49.128 Section 49.128 Protection of Environment ENVIRONMENTAL... Region 10 § 49.128 Rule for limiting particulate matter emissions from wood products industry sources. (a... emitted from certain wood products industry sources operating within the Indian reservation to control...

40 CFR 49.128 - Rule for limiting particulate matter emissions from wood products industry sources.

Code of Federal Regulations, 2011 CFR

2011-07-01

... emissions from wood products industry sources. 49.128 Section 49.128 Protection of Environment ENVIRONMENTAL... Region 10 § 49.128 Rule for limiting particulate matter emissions from wood products industry sources. (a... emitted from certain wood products industry sources operating within the Indian reservation to control...

Serial and parallel power equipment with high-temperature superconducting elements

NASA Technical Reports Server (NTRS)

Bencze, Laszlo; Goebl, Nandor; Palotas, Bela; Vajda, Istvan

1995-01-01

One of the prospective, practical applications of high-temperature superconductors is the fault-current limitation in electrical energy networks. The development and testing of experimental HTSC serial current limiters have been reported in the literature. A Hungarian electric power company has proposed the development of a parallel equipment for arc suppressing both in the industrial and customers' networks. On the basis of the company's proposal the authors have outlined the scheme of a compound circuit that can be applied both for current limitation and arc suppressing. In this paper the design principles and methods of the shunt equipment are presented. These principles involve the electrical, mechanical and cryogenic aspects with the special view on the electrical and mechanical connection between the HTSC material and the current lead. Preliminary experiments and tests have been carried out to demonstrate the validity of the design principles developed. The results of the experiments and of the technological investigations are presented.

Castings Airworthiness

DTIC Science & Technology

1989-05-01

also drawn up by Vereinigte Flugtech- nischen Werken as a technoeconomic analysis . The aerospace industry will be looking for the following...ultimate load without rupture. These conditions are verified by analysis and test. The limit load is the maximum load the vehicle is expected to see...the uncertainty factor (formerly known as the factor of safety) which accounts for variations in manufacture, defects not assumed in analysis but

Limulus amoebocyte lysate test via an open-microcavity optical biosensor

NASA Astrophysics Data System (ADS)

Scudder, Jonathan; Ye, Jing Yong

2018-02-01

Almost since its discovery, Limulus amoebocyte lysate (LAL) testing has been an important part of the pharmaceutical quality control toolkit. It allows for in vitro endotoxin testing, which has replaced tests using animals, such as using rabbits' thermal response to judge pyrogenicity of test samples, thus leading to a less expensive and faster test of parenteral pharmaceuticals and medical devices that contact blood or cerebrospinal fluid. However, limited by the detection mechanisms of the LAL assays currently used in industry, further improvement in their performance is challenging. To address the growing demand on optimizing LAL assays for increased test sensitivity and reduced assay time, we have developed an LAL assay approach based on a detection mechanism that is different from those being used in industry, namely, gel-clot, turbidimetric, and chromogenic detection. Using a unique open-microcavity photonic-crystal biosensor to monitor the change in the refractive index due to the reaction between LAL regents and endotoxins, we have demonstrated that this approach has improved the LAL assay sensitivity by 200 times compared with the commercial standard methods, reduced the time needed for the assay by more than half, and eliminated the necessity to incubate the test samples. This study opens up the possibility of using the significantly improved LAL assays for a wide range of applications.

Examining lag effects between industrial land development and regional economic changes: The Netherlands experience.

PubMed

Ustaoglu, Eda; Lavalle, Carlo

2017-01-01

In most empirical applications, forecasting models for the analysis of industrial land focus on the relationship between current values of economic parameters and industrial land use. This paper aims to test this assumption by focusing on the dynamic relationship between current and lagged values of the 'economic fundamentals' and industrial land development. Not much effort has yet been attributed to develop land forecasting models to predict the demand for industrial land except those applying static regressions or other statistical measures. In this research, we estimated a dynamic panel data model across 40 regions from 2000 to 2008 for the Netherlands to uncover the relationship between current and lagged values of economic parameters and industrial land development. Land-use regulations such as land zoning policies, and other land-use restrictions like natural protection areas, geographical limitations in the form of water bodies or sludge areas are expected to affect supply of land, which will in turn be reflected in industrial land market outcomes. Our results suggest that gross domestic product (GDP), industrial employment, gross value added (GVA), property price, and other parameters representing demand and supply conditions in the industrial market explain industrial land developments with high significance levels. It is also shown that contrary to the current values, lagged values of the economic parameters have more sound relationships with the industrial developments in the Netherlands. The findings suggest use of lags between selected economic parameters and industrial land use in land forecasting applications.

Examining lag effects between industrial land development and regional economic changes: The Netherlands experience

PubMed Central

Ustaoglu, Eda; Lavalle, Carlo

2017-01-01

In most empirical applications, forecasting models for the analysis of industrial land focus on the relationship between current values of economic parameters and industrial land use. This paper aims to test this assumption by focusing on the dynamic relationship between current and lagged values of the ‘economic fundamentals’ and industrial land development. Not much effort has yet been attributed to develop land forecasting models to predict the demand for industrial land except those applying static regressions or other statistical measures. In this research, we estimated a dynamic panel data model across 40 regions from 2000 to 2008 for the Netherlands to uncover the relationship between current and lagged values of economic parameters and industrial land development. Land-use regulations such as land zoning policies, and other land-use restrictions like natural protection areas, geographical limitations in the form of water bodies or sludge areas are expected to affect supply of land, which will in turn be reflected in industrial land market outcomes. Our results suggest that gross domestic product (GDP), industrial employment, gross value added (GVA), property price, and other parameters representing demand and supply conditions in the industrial market explain industrial land developments with high significance levels. It is also shown that contrary to the current values, lagged values of the economic parameters have more sound relationships with the industrial developments in the Netherlands. The findings suggest use of lags between selected economic parameters and industrial land use in land forecasting applications. PMID:28877204

On-road emissions of light-duty vehicles in europe.

PubMed

Weiss, Martin; Bonnel, Pierre; Hummel, Rudolf; Provenza, Alessio; Manfredi, Urbano

2011-10-01

For obtaining type approval in the European Union, light-duty vehicles have to comply with emission limits during standardized laboratory emissions testing. Although emission limits have become more stringent in past decades, light-duty vehicles remain an important source of nitrogen oxides and carbon monoxide emissions in Europe. Furthermore, persisting air quality problems in many urban areas suggest that laboratory emissions testing may not accurately capture the on-road emissions of light-duty vehicles. To address this issue, we conduct the first comprehensive on-road emissions test of light-duty vehicles with state-of-the-art Portable Emission Measurement Systems. We find that nitrogen oxides emissions of gasoline vehicles as well as carbon monoxide and total hydrocarbon emissions of both diesel and gasoline vehicles generally remain below the respective emission limits. By contrast, nitrogen oxides emissions of diesel vehicles (0.93 ± 0.39 grams per kilometer [g/km]), including modern Euro 5 diesel vehicles (0.62 ± 0.19 g/km), exceed emission limits by 320 ± 90%. On-road carbon dioxide emissions surpass laboratory emission levels by 21 ± 9%, suggesting that the current laboratory emissions testing fails to accurately capture the on-road emissions of light-duty vehicles. Our findings provide the empirical foundation for the European Commission to establish a complementary emissions test procedure for light-duty vehicles. This procedure could be implemented together with more stringent Euro 6 emission limits in 2014. The envisaged measures should improve urban air quality and provide incentive for innovation in the automotive industry.

Development and Dematerialization: An International Study

PubMed Central

Steinberger, Julia K.; Krausmann, Fridolin; Getzner, Michael; Schandl, Heinz; West, Jim

2013-01-01

Economic development and growth depend on growing levels of resource use, and result in environmental impacts from large scale resource extraction and emissions of waste. In this study, we examine the resource dependency of economic activities over the past several decades for a set of countries comprising developing, emerging and mature industrialized economies. Rather than a single universal industrial development pathway, we find a diversity of economic dependencies on material use, made evident through cluster analysis. We conduct tests for relative and absolute decoupling of the economy from material use, and compare these with similar tests for decoupling from carbon emissions, both for single countries and country groupings using panel analysis. We show that, over the longer term, emerging and developing countries tend to have significantly larger material-economic coupling than mature industrialized economies (although this effect may be enhanced by trade patterns), but that the contrary is true for short-term coupling. Moreover, we demonstrate that absolute dematerialization limits economic growth rates, while the successful industrialization of developing countries inevitably requires a strong material component. Alternative development priorities are thus urgently needed both for mature and emerging economies: reducing absolute consumption levels for the former, and avoiding the trap of resource-intensive economic and human development for the latter. PMID:24204555

Traceability in hardness measurements: from the definition to industry

NASA Astrophysics Data System (ADS)

Germak, Alessandro; Herrmann, Konrad; Low, Samuel

2010-04-01

The measurement of hardness has been and continues to be of significant importance to many of the world's manufacturing industries. Conventional hardness testing is the most commonly used method for acceptance testing and production quality control of metals and metallic products. Instrumented indentation is one of the few techniques available for obtaining various property values for coatings and electronic products in the micrometre and nanometre dimensional scales. For these industries to be successful, it is critical that measurements made by suppliers and customers agree within some practical limits. To help assure this measurement agreement, a traceability chain for hardness measurement traceability from the hardness definition to industry has developed and evolved over the past 100 years, but its development has been complicated. A hardness measurement value not only requires traceability of force, length and time measurements but also requires traceability of the hardness values measured by the hardness machine. These multiple traceability paths are needed because a hardness measurement is affected by other influence parameters that are often difficult to identify, quantify and correct. This paper describes the current situation of hardness measurement traceability that exists for the conventional hardness methods (i.e. Rockwell, Brinell, Vickers and Knoop hardness) and for special-application hardness and indentation methods (i.e. elastomer, dynamic, portables and instrumented indentation).

15 CFR 700.18 - Limitations on placing rated orders.

Code of Federal Regulations, 2012 CFR

2012-01-01

... transportation (Department of Transportation); (v) Water resources (Department of Defense/U.S. Army Corps of... (Continued) BUREAU OF INDUSTRY AND SECURITY, DEPARTMENT OF COMMERCE NATIONAL SECURITY INDUSTRIAL BASE REGULATIONS DEFENSE PRIORITIES AND ALLOCATIONS SYSTEM Industrial Priorities § 700.18 Limitations on placing...

15 CFR 700.18 - Limitations on placing rated orders.

Code of Federal Regulations, 2014 CFR

2014-01-01

... transportation (Department of Transportation); (v) Water resources (Department of Defense/U.S. Army Corps of... (Continued) BUREAU OF INDUSTRY AND SECURITY, DEPARTMENT OF COMMERCE NATIONAL SECURITY INDUSTRIAL BASE REGULATIONS DEFENSE PRIORITIES AND ALLOCATIONS SYSTEM Industrial Priorities § 700.18 Limitations on placing...

15 CFR 700.18 - Limitations on placing rated orders.

Code of Federal Regulations, 2013 CFR

2013-01-01

... transportation (Department of Transportation); (v) Water resources (Department of Defense/U.S. Army Corps of... (Continued) BUREAU OF INDUSTRY AND SECURITY, DEPARTMENT OF COMMERCE NATIONAL SECURITY INDUSTRIAL BASE REGULATIONS DEFENSE PRIORITIES AND ALLOCATIONS SYSTEM Industrial Priorities § 700.18 Limitations on placing...

First Generation Least Expensive Approach to Fission (FiGLEAF) Testing Results

NASA Technical Reports Server (NTRS)

VanDyke, Melissa; Houts, Mike; Pedersen, Kevin; Godfroy, Tom; Dickens, Ricky; Poston, David; Reid, Bob; Salvail. Pat; Ring, Peter; Schmidt, George R. (Technical Monitor)

2000-01-01

Successful development of space fission systems will require an extensive program of affordable and realistic testing. In addition to tests related to design/development of the fission system, realistic testing of the actual flight unit must also be performed. Testing can be divided into two categories, non-nuclear tests and nuclear tests. Full power nuclear tests of space fission systems are expensive, time consuming, and of limited use, even in the best of programmatic environments. If the system is designed to operate within established radiation damage and fuel burn up limits while simultaneously being designed to allow close simulation of heat from fission using resistance heaters, high confidence in fission system performance and lifetime can be attained through a series of non-nuclear tests. Non-nuclear tests are affordable and timely, and the cause of component and system failures can be quickly and accurately identified. MSFC is leading a Safe Affordable Fission Engine (SAFE) test series whose ultimate goal is the demonstration of a 300 kW flight configuration system using non-nuclear testing. This test series is carried out in collaboration with other NASA centers, other government agencies, industry, and universities. The paper describes the SAFE test series, which includes test article descriptions, test results and conclusions, and future test plans.

Childhood cancer and occupational radiation exposure in parents.

PubMed

Hicks, N; Zack, M; Caldwell, G G; Fernbach, D J; Falletta, J M

1984-04-15

To test the hypothesis that a parent's job exposure to radiation affects his or her child's risk of cancer, the authors compared this exposure during the year before the child's birth for parents of children with and without cancer. Parents of children with cancer were no more likely to have worked in occupations, industries, or combined occupations and industries with potential ionizing radiation exposure. Bone cancer and Wilms' tumor occurred more frequently among children of fathers in all industries with moderate potential ionizing radiation exposure. Children with cancer more often had fathers who were aircraft mechanics (odds ratio (OR) = infinity, one-sided 95% lower limit = 1.5; P = 0.04). Although four of these six were military aircraft mechanics, only children whose fathers had military jobs with potential ionizing radiation exposure had an increased cancer risk (OR = 2.73; P = 0.01). Four cancer types occurred more often among children of fathers in specific radiation-related occupations: rhabdomyosarcoma among children whose fathers were petroleum industry foremen; retinoblastoma among children whose fathers were radio and television repairmen; central nervous system cancers and other lymphatic cancers among children of Air Force fathers. Because numbers of case fathers are small and confidence limits are broad, the associations identified by this study need to be confirmed in other studies. Better identification and gradation of occupational exposure to radiation would increase the sensitivity to detect associations.

Creating a climate for ergonomic changes in the construction industry.

PubMed

Boatman, Laura; Chaplan, Debra; Teran, Suzanne; Welch, Laura S

2015-08-01

Ergonomic solutions that have gained acceptance in other industries are often considered not applicable to a construction work environment, even though the industry is characterized by high physical work demands. We conducted 50 key informant interviews with 23 contractor representatives and 27 union staff, plus 4 focus groups with a total of 48 workers. Many workers hold the belief that WMSDs are inevitable as part of the job, and did not consistently believe that changing the nature of the work could prevent that injury or pain. The interviewees reported limited availability and accessibility of tested and effective tools that both reduce physical demand and also get the job done efficiently and effectively. Yet for each major obstacle to implementation of ergonomics in the industry identified, the construction professionals we interviewed offered a variety of solutions. Contractors, unions, and workers need to work together to find actions that work within the parameters of the current economic environment. © 2015 Wiley Periodicals, Inc.

Atmospheric CH4 Concentrations from the Commonwealth Scientific and Industrial Research Organization (CSIRO) GASLAB Flask Sampling Network (1984 - 2001)

DOE Data Explorer

Steele, L. P. [Commonwealth Scientific and Industrial Research Organization (CSIRO), Aspendale, Victoria, Australia; Krummel, P. B. [Commonwealth Scientific and Industrial Research Organization (CSIRO), Aspendale, Victoria, Australia; Langenfelds, R. L. [Commonwealth Scientific and Industrial Research Organization (CSIRO), Aspendale, Victoria, Australia

2003-01-01

The listed data were obtained from flask air samples returned to the CSIRO GASLAB for analysis. Typical sample storage times ranged from days to weeks for some sites (e.g., Cape Grim) to as much as one year for Macquarie Island and the Antarctic sites. Experiments carried out to test for any change in sample CH4 mixing ratio during storage have shown no drift to within detection limits over test periods of several months to years (Cooper et al., 1999).

East Europe Report, Economic and Industrial Affairs.

DTIC Science & Technology

1984-06-07

undeniable that even objectivized norms often lack the required quality. Many of them have not been determined by dependable analytical met methods ...incentive methods , such as, for example, contract wages and their various modifications, are applied only to a limited extent. Many economic managers...discipline. Method of the Future—Work Team Khozrashchet We have been testing and gradually expanding work team forms of labor organiza- tion and

Adapted diffusion processes for effective forging dies

NASA Astrophysics Data System (ADS)

Paschke, H.; Nienhaus, A.; Brunotte, K.; Petersen, T.; Siegmund, M.; Lippold, L.; Weber, M.; Mejauschek, M.; Landgraf, P.; Braeuer, G.; Behrens, B.-A.; Lampke, T.

2018-05-01

Hot forging is an effective production method producing safety relevant parts with excellent mechanical properties. The economic efficiency directly depends on the occurring wear of the tools, which limits service lifetime. Several approaches of the presenting research group aim at minimizing the wear caused by interacting mechanical and thermal loads by using enhanced nitriding technology. Thus, by modifying the surface zone layer it is possible to create a resistance against thermal softening provoking plastic deformation and pronounced abrasive wear. As a disadvantage, intensely nitrided surfaces may possibly include the risk of increased crack sensitivity and therefore feature the chipping of material at the treated surface. Recent projects (evaluated in several industrial applications) show the high technological potential of adapted treatments: A first approach evaluated localized treatments by preventing areas from nitrogen diffusion with applied pastes or other coverages. Now, further ideas are to use this principle to structure the surface with differently designed patterns generating smaller ductile zones beneath nitrided ones. The selection of suitable designs is subject to certain geo-metrical requirements though. The intention of this approach is to prevent the formation and propagation of cracks under thermal shock conditions. Analytical characterization methods for crack sensitivity of surface zone layers and an accurate system of testing rigs for thermal shock conditions verified the treatment concepts. Additionally, serial forging tests using adapted testing geometries and finally, tests in the industrial production field were performed. Besides stabilizing the service lifetime and decreasing specific wear mechanisms caused by thermal influences, the crack behavior was influenced positively. This leads to a higher efficiency of the industrial production process and enables higher output in forging campaigns of industrial partners.

A new modified wetting test and an alternative disintegration test for orally disintegrating tablets.

PubMed

Hooper, Patrick; Lasher, Jason; Alexander, Kenneth S; Baki, Gabriella

2016-02-20

Industrial manufacturing of solid oral dosage forms require quality tests, such as friability, hardness, and disintegration. The United States Pharmacopeia (USP) disintegration test uses 900mL of water. However, recent studies of orally disintegrating tablets (ODTs) have shown that this volume does not accurately portray the oral environment. In our study, various tests were conducted with a more moderate amount of water that accurately resembles the oral environment. A simulated wetting test was performed to calculate the water absorption ratio. Results showed that wetting was comparable to disintegration. Although the wetting test worked for most types of ODTs, it had limitations that produced inaccurate results. This led to the use of a modified shaking water bath test. This test was found to work for all types of ODT products and was not subject to the limitations of the wetting test. The shake test could provide disintegration times rather than water permeation times; however, it could not be used to calculate the water absorption ratio. A strong correlation was observed between the standardized shake test and the USP disintegration times for the tablets. This shake test could be used during the development stages and quality tests for ODTs with relative ease. Copyright © 2015 Elsevier B.V. All rights reserved.

Application of a catalytic combustion sensor (Pellistor) for the monitoring of the explosiveness of a hydrogen-air mixture in the upper explosive limit range

PubMed Central

Krawczyk, M.; Namiesnik, J.

2003-01-01

A new technique is presented for continuous measurements of hydrogen contamination by air in the upper explosive limit range. It is based on the application of a catalytic combustion sensor placed in a cell through which the tested sample passes. The air content is the function of the quantity of formed heat during catalytic combustion of hydrogen inside the sensor. There is the possibility of using the method in industrial installations by using hydrogen for cooling electric current generators. PMID:18924620

Multi parametrical indicator test for urban wastewater influence

NASA Astrophysics Data System (ADS)

Humer, Franko; Weiss, Stefan; Reinnicke, Sandra; Clara, Manfred; Grath, Johannes; Windhofer, Georg

2013-04-01

Austria's drinking water is abstracted from groundwater. While 50 % of the Austrian population are supplied with spring water, the other 50 % get their drinking water from groundwater supplies, in part from enormous quaternary valley and basin deposits, subjected to intensive use by population, industry, agriculture and traffic/transport. Due to protected areas around drinking water wells and springs, there is no treatment necessary in most cases. Water bodies, however, can be affected by different pathways from natural, industrial and urban sources. Identification of anthropogenic sources is paramount for taking appropriate measures to safeguard the quality of drinking water supply. Common parameters like boron are widely used as tracers indicating anthropogenic impacts (e.g. wastewater contamination of groundwater systems). Unfortunately application of these conventional indicators is often limited due to high dilution. Another application where common parameters have their limits is the identification and quantification of the diffuse nitrogen input to water by the stable isotopes of nitrogen and oxygen in nitrate. Without any additional tracers the source distinction of nitrate from manure or waste water is still difficult. Even the application of boron isotopes can in some cases not avoid ambiguous interpretation. Therefore the Umweltbundesamt (Environment Agency Austria) developed a multi parametrical indicator test which shall allow for identification and quantification of anthropogenic pollutions. The test aims at analysing eight target substances which are well known to occur in wastewater: Acesulfame and sucralose (two artificial, calorie-free sweeteners), benzotriazole and tolyltriazole (two industrial chemicals/corrosion inhibitors), metoprolol, sotalol, carbamazepine and the metabolite 10,11-Dihydro-10,11-dihydroxycarbamazepin (pharmaceuticals). These substances are polar and degradation in the aquatic system by microbiological processes is not suspected. Moreover, they do not occur naturally which make them to ideal tracer substances. Analysis is performed by ultra-performance liquid chromatography with mass selective detection (UPLC-MSMS). Samples are enriched by solid phase extraction before. The test is able to indicate an 0.1 % entry of municipal wastewater into the analysed water. Results of application in practise and advantages of the urban wastewater indicator test are discussed.

40 CFR 403.12 - Reporting requirements for POTW's and industrial users.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Industrial Users subject to equivalent mass or concentration limits established by the Control Authority in... for the duration of the effective period of the Permit or other equivalent individual control... Industrial Users subject to equivalent mass or concentration limits established by the Control Authority in...

High-Temperature Magnetic Bearings for Gas Turbine Engines

NASA Technical Reports Server (NTRS)

1996-01-01

Magnetic bearings are the subject of a new NASA Lewis Research Center and U.S. Army thrust with significant industry participation, and coordination with other Government agencies. The NASA/Army emphasis is on high-temperature applications for future gas turbine engines. Magnetic bearings could increase the reliability and reduce the weight of these engines by eliminating the lubrication system. They could also increase the DN (diameter of the bearing times rpm) limit on engine speed and allow active vibration cancellation systems to be used--resulting in a more efficient, "more electric" engine. Finally, the Integrated High-Performance Turbine Engine Technology (IHPTET) Program, a joint Department of Defense/industry program, identified a need for a hightemperature (as high as 1200 F) magnetic bearing that could be demonstrated in a phase III engine. This magnetic bearing is similar to an electric motor. It has a laminated rotor and stator made of cobalt steel. Wound around the stator are a series of electrical wire coils that form a series of electric magnets around the circumference. The magnets exert a force on the rotor. A probe senses the position of the rotor, and a feedback controller keeps it in the center of the cavity. The engine rotor, bearings, and case form a flexible structure that contains a large number of modes. The bearing feedback controller, which could cause some of these modes to become unstable, could be adapted to varying flight conditions to minimize seal clearances and monitor the health of the system. Cobalt steel has a curie point greater than 1700 F, and copper wire has a melting point beyond that. Therefore, practical limitations associated with the maximum magnetic field strength in the cobalt steel and the stress in the rotating components limit the temperature to about 1200 F. The objective of this effort is to determine the limits in temperature and speed of a magnetic bearing operating in an engine. Our approach is to use our in-house experience in magnets, mechanical components, high-temperature materials, and surface lubrication to build and test a magnetic bearing in both a rig and an engine. Testing will be done at Lewis or through cooperative programs in industrial facilities.

Testing the Immunity of the Firearm Industry to Tort Litigation.

PubMed

Studdert, David M; Donohue, John J; Mello, Michelle M

2017-01-01

In the absence of congressional action to reinstate the federal ban on assault weapons, tort litigation offers an alternative strategy for regulating what have become the weapons of choice in mass shootings. However, opportunities to bring successful claims are limited. To prevail, plaintiffs must show that their suit fits within exceptions to the broad immunity from tort actions that Congress gave the firearm industry in the 2005 Protection of Lawful Commerce in Arms Act. In one particularly high-profile lawsuit, families of victims of the school shooting in Newtown, Connecticut, in 2012 sued the makers and sellers of the military-style rifle used in the attack, alleging negligence and deceptive marketing. The trial court dismissed the case on October 14, 2016, but the plaintiffs plan to appeal. We review the history of tort litigation against the firearm industry, outline the Newtown families' claims, and describe the decision.

A self-tuning automatic voltage regulator designed for an industrial environment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Flynn, D.; Hogg, B.W.; Swidenbank, E.

Examination of the performance of fixed parameter controllers has resulted in the development of self-tuning strategies for excitation control of turbogenerator systems. In conjunction with the advanced control algorithms, sophisticated measurement techniques have previously been adopted on micromachine systems to provide generator terminal quantities. In power stations, however, a minimalist hardware arrangement would be selected leading to relatively simple measurement techniques. The performance of a range of self-tuning schemes is investigated on an industrial test-bed, employing a typical industrial hardware measurement system. Individual controllers are implemented on a standard digital automatic voltage regulator, as installed in power stations. This employsmore » a VME platform, and the self-tuning algorithms are introduced by linking to a transputer network. The AVR includes all normal features, such as field forcing, VAR limiting and overflux protection. Self-tuning controller performance is compared with that of a fixed gain digital AVR.« less

78 FR 42387 - Draft Guidance for Industry on Circumstances That Constitute Delaying, Denying, Limiting, or...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-15

... Guidance for Industry on Circumstances That Constitute Delaying, Denying, Limiting, or Refusing a Drug... Drug Administration (FDA) is announcing the availability of a draft guidance for industry entitled... Administration Safety and Innovation Act (FDASIA) added a new provision to the Food, Drug, and Cosmetic Act (FD&C...

Testing antismoking messages for Air Force trainees.

PubMed

Popova, Lucy; Linde, Brittany D; Bursac, Zoran; Talcott, G Wayne; Modayil, Mary V; Little, Melissa A; Ling, Pamela M; Glantz, Stanton A; Klesges, Robert C

2016-11-01

Young adults in the military are aggressively targeted by tobacco companies and are at high risk of tobacco use. Existing antismoking advertisements developed for the general population might be effective in educating young adults in the military. This study evaluated the effects of different themes of existing antismoking advertisements on perceived harm and intentions to use cigarettes and other tobacco products among Air Force trainees. In a pretest-post-test experiment, 782 Airmen were randomised to view antismoking advertisements in 1 of 6 conditions: anti-industry, health effects+anti-industry, sexual health, secondhand smoke, environment+anti-industry or control. We assessed the effect of different conditions on changes in perceived harm and intentions to use cigarettes, electronic cigarettes, smokeless tobacco, hookah and cigarillos from pretest to post-test with multivariable linear regression models (perceived harm) and zero-inflated Poisson regression model (intentions). Antismoking advertisements increased perceived harm of various tobacco products and reduced intentions to use. Advertisements featuring negative effects of tobacco on health and sexual performance coupled with revealing tobacco industry manipulations had the most consistent pattern of effects on perceived harm and intentions. Antismoking advertisements produced for the general public might also be effective with a young adult military population and could have spillover effects on perceptions of harm and intentions to use other tobacco products besides cigarettes. Existing antismoking advertising may be a cost-effective tool to educate young adults in the military. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Science and Technology in Development Environments - Industry and Department of Defense Case Studies

DTIC Science & Technology

2003-11-01

an acronym for Product and Cycle Time Excellence, is designed to manage product development , business development , and business alliance processes...experiments. 3. Test Practicality—Pilot development with limited production. 4. Prove Profitability—Pilot production. 5. Manage Life Cycle —Manufacturing and...compressor, particularly in a turbofan configuration, was developed primarily under a CIP for these two engines. The TF30 and F100 experiences provide

Superconducting Magnetic Projectile Launcher

NASA Technical Reports Server (NTRS)

Jan, Darrell L.; Lawson, Daniel D.

1991-01-01

Proposed projectile launcher exploits Meissner effect to transfer much of kinetic energy of relatively massive superconducting plunger to smaller projectile, accelerating projectile to high speed. Because it operates with magnetic fields, launcher not limited by gas-expansion thermodynamics. Plunger energized mechanically and/or chemically, avoiding need for large electrical power supplies and energy-storage systems. Potential applications include launching of projectiles for military purposes and for scientific and industrial tests of hypervelocity impacts.

Effect of added nitrogen fertilizer on pyrazines of roasted chicory.

PubMed

Jouquand, Céline; Niquet-Léridon, Céline; Loaec, Grégory; Tessier, Frédéric Jacques

2017-03-01

Coffee substitutes made of roasted chicory are affected by the formation of acrylamide whose main precursor is asparagine. One strategy for limiting the formation of acrylamide is to reduce free asparagine in the chicory roots by lessening the supply of nitrogen in the field. However, decreasing nitrogen fertilizer could affect the formation of the volatile compounds and, consequently, the sensory characteristics of the roasted chicory. The present study aimed to investigate the impact of the nitrogen supply in five commercial varieties on their aroma profile. The addition of 120 kg ha -1 of nitrogen fertilizer in the field resulted in a greater amount of pyrazines in the roasted chicory. Triangle tests were performed to determine the effect of the nitrogen level on the sensory quality of the five varieties. The results revealed that the chicory aroma was modified in two out of five varieties. The results of the present study suggest that a strategy aiming to limit the amount of acrylamide could affect the sensory quality of some varieties of chicory. Further acceptance tests need to be conducted to assess the effect (whether favourable or otherwise) on the sensory quality of the coffee substitutes. © 2016 Society of Chemical Industry. © 2016 Society of Chemical Industry.

Space Fission Propulsion Testing and Development Progress. Phase 1

NASA Technical Reports Server (NTRS)

VanDyke, Melissa; Houts, Mike; Pedersen, Kevin; Godfroy, Tom; Dickens, Ricky; Poston, David; Reid, Bob; Salvail, Pat; Ring, Peter; Rodgers, Stephen L. (Technical Monitor)

2001-01-01

Successful development of space fission systems will require an extensive program of affordable and realistic testing. In addition to tests related to design/development of the fission system, realistic testing of the actual flight unit must also be performed. Testing can be divided into two categories, non-nuclear tests and nuclear tests. Full power nuclear tests of space fission systems we expensive, time consuming, and of limited use, even in the best of programmatic environments. If the system is designed to operate within established radiation damage and fuel burn up limits while simultaneously being designed to allow close simulation of heat from fission using resistance heaters, high confidence in fission system performance and lifetime can be attained through a series of non-nuclear tests. Non-nuclear tests are affordable and timely, and the cause of component and system failures can be quickly and accurately identified. MSFC is leading a Safe Affordable Fission Engine (SAFE) test series whose ultimate goal is the demonstration of a 300 kW flight configuration system using non-nuclear testing. This test series is carried out in collaboration with other NASA centers, other government agencies, industry, and universities. If SAFE-related nuclear tests are desired they will have a high probability of success and can be performed at existing nuclear facilities. The paper describes the SAFE non-nuclear test series, which includes test article descriptions, test results and conclusions, and future test plans.

Phase 1 space fission propulsion system testing and development progress

NASA Astrophysics Data System (ADS)

van Dyke, Melissa; Houts, Mike; Pedersen, Kevin; Godfroy, Tom; Dickens, Ricky; Poston, David; Reid, Bob; Salvail, Pat; Ring, Peter

2001-02-01

Successful development of space fission systems will require an extensive program of affordable and realistic testing. In addition to tests related to design/development of the fission system, realistic testing of the actual flight unit must also be performed. Testing can be divided into two categories, non-nuclear tests and nuclear tests. Full power nuclear tests of space fission systems are expensive, time consuming, and of limited use, even in the best of programmatic environments. If the system is designed to operate within established radiation damage and fuel burn up limits while simultaneously being designed to allow close simulation of heat from fission using resistance heaters, high confidence in fission system performance and lifetime can be attained through a series of non-nuclear tests. Non-nuclear tests are affordable and timely, and the cause of component and system failures can be quickly and accurately identified, MSFC is leading a Safe Affordable Fission Engine (SAFE) test series whose ultimate goal is the demonstration of a 300 kW flight configuration system using non-nuclear testing. This test series is carried out in collaboration with other NASA centers, other government agencies, industry, and universities. If SAFE-related nuclear tests are desired, they will have a high probability of success and can be performed at existing nuclear facilities. The paper describes the SAFE non-nuclear test series, which includes test article descriptions, test results and conclusions, and future test plans. .

Using genetic algorithms to determine near-optimal pricing, investment and operating strategies in the electric power industry

NASA Astrophysics Data System (ADS)

Wu, Dongjun

Network industries have technologies characterized by a spatial hierarchy, the "network," with capital-intensive interconnections and time-dependent, capacity-limited flows of products and services through the network to customers. This dissertation studies service pricing, investment and business operating strategies for the electric power network. First-best solutions for a variety of pricing and investment problems have been studied. The evaluation of genetic algorithms (GA, which are methods based on the idea of natural evolution) as a primary means of solving complicated network problems, both w.r.t. pricing: as well as w.r.t. investment and other operating decisions, has been conducted. New constraint-handling techniques in GAs have been studied and tested. The actual application of such constraint-handling techniques in solving practical non-linear optimization problems has been tested on several complex network design problems with encouraging initial results. Genetic algorithms provide solutions that are feasible and close to optimal when the optimal solution is know; in some instances, the near-optimal solutions for small problems by the proposed GA approach can only be tested by pushing the limits of currently available non-linear optimization software. The performance is far better than several commercially available GA programs, which are generally inadequate in solving any of the problems studied in this dissertation, primarily because of their poor handling of constraints. Genetic algorithms, if carefully designed, seem very promising in solving difficult problems which are intractable by traditional analytic methods.

Investigations of current limiting properties of the MgB2 wires subjected to pulse overcurrents in the benchtop tester

NASA Astrophysics Data System (ADS)

Ye, Lin; Majoros, M.; Campbell, A. M.; Coombs, T.; Harrison, S.; Sargent, P.; Haslett, M.; Husband, M.

2007-04-01

A laboratory scale desktop test system including a cryogenic system, an AC pulse generation system and a real time data acquisition program in LabView/DAQmx, has been developed to evaluate the quench properties of MgB2 wires as an element in a superconducting fault current limiter under pulse overcurrents at 25 K in self-field conditions. The MgB2 samples started from a superconducting state and demonstrated good current limiting properties characterized by a fast transition to the normal state during the first half of the cycle and a continuously limiting effect in the subsequent cycles without burnouts. The experimental and numerical simulation results on the quench behaviour indicate the feasibility of using MgB2 for future superconducting fault current limiter (SFCL) applications. This work is supported by Rolls-Royce Plc and the UK Department of Trade & Industry (DTI).

An analysis of the effect of funding source in randomized clinical trials of second generation antipsychotics for the treatment of schizophrenia.

PubMed

Montgomery, John H; Byerly, Matthew; Carmody, Thomas; Li, Baitao; Miller, Daniel R; Varghese, Femina; Holland, Rhiannon

2004-12-01

The effect of funding source on the outcome of randomized controlled trials has been investigated in several medical disciplines; however, psychiatry has been largely excluded from such analyses. In this article, randomized controlled trials of second generation antipsychotics in schizophrenia are reviewed and analyzed with respect to funding source (industry vs. non-industry funding). A literature search was conducted for randomized, double-blind trials in which at least one of the tested treatments was a second generation antipsychotic. In each study, design quality and study outcome were assessed quantitatively according to rating scales. Mean quality and outcome scores were compared in the industry-funded studies and non-industry-funded studies. An analysis of the primary author's affiliation with industry was similarly performed. Results of industry-funded studies significantly favored second generation over first generation antipsychotics when compared to non-industry-funded studies. Non-industry-funded studies showed a trend toward higher quality than industry-funded studies; however, the difference between the two was not significant. Also, within the industry-funded studies, outcomes of trials involving first authors employed by industry sponsors demonstrated a trend toward second generation over first generation antipsychotics to a greater degree than did trials involving first authors employed outside the industry (p=0.05). While the retrospective design of the study limits the strength of the findings, the data suggest that industry bias may occur in randomized controlled trials in schizophrenia. There appears to be several sources by which bias may enter clinical research, including trial design, control of data analysis and multiplicity/redundancy of trials.

Co-creation of market expansion in point-of-care testing in the United States: Industry leadership perspectives on the community pharmacy segment.

PubMed

Hohmeier, Kenneth C; McDonough, Sharon L K; Wang, Junling

Point-of-care testing (POCT) is a specialty of laboratory medicine that occurs at the bedside or near the patient when receiving health services. Despite its established clinical utility and consumer demand in the community pharmacy, the implementation of POCT within this setting has remained modest for a variety of reasons. One possible solution to this problem is the concept of co-creation - the partnership between consumer and manufacturer in the development of value for a service or device. Using the theoretical underpinning of co-creation, this study aimed to investigate perceptions of point-of-care-testing (POCT) industry leadership on the community pharmacy market in the United States to uncover reasons for limited implementation within community pharmacies. Participants were recruited for this study through the use of snowball sampling. A series of semi-structured interviews were conducted with the participants via telephone. Interviews were recorded, transcribed, and entered into a qualitative analysis software program to summarize the data. Five key themes were uncovered: gaps in understanding, areas of positive impact, barriers to implementation, facilitators of implementation, and community pharmacy - a potential major player. Through uncovering gaps in perceptions, it may be possible to leverage the U.S. pharmacy industry's size, potential for scalability, and ease of patient access to further patient care. Copyright © 2016 Elsevier Inc. All rights reserved.

76 FR 323 - Aluminum Extrusions From the People's Republic of China: Notice of Amended Preliminary...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-04

... Aluminium Industries Co., Ltd., Foshan Guangcheng Aluminium Co., Ltd., Kong Ah International Company Limited, and Guang Ya Aluminium Industries (Hong Kong) Limited, (collectively, ``Guang Ya Group'') and Zhaoqing New Zhongya Aluminum Co., Ltd., Zhongya Shaped Aluminium (HK) Holding Limited, and Karlton Aluminum...

10 CFR 34.21 - Limits on external radiation levels from storage containers and source changers.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 1 2014-01-01 2014-01-01 false Limits on external radiation levels from storage... INDUSTRIAL RADIOGRAPHY AND RADIATION SAFETY REQUIREMENTS FOR INDUSTRIAL RADIOGRAPHIC OPERATIONS Equipment § 34.21 Limits on external radiation levels from storage containers and source changers. The maximum...

10 CFR 34.21 - Limits on external radiation levels from storage containers and source changers.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 1 2012-01-01 2012-01-01 false Limits on external radiation levels from storage... INDUSTRIAL RADIOGRAPHY AND RADIATION SAFETY REQUIREMENTS FOR INDUSTRIAL RADIOGRAPHIC OPERATIONS Equipment § 34.21 Limits on external radiation levels from storage containers and source changers. The maximum...

10 CFR 34.21 - Limits on external radiation levels from storage containers and source changers.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 1 2011-01-01 2011-01-01 false Limits on external radiation levels from storage... INDUSTRIAL RADIOGRAPHY AND RADIATION SAFETY REQUIREMENTS FOR INDUSTRIAL RADIOGRAPHIC OPERATIONS Equipment § 34.21 Limits on external radiation levels from storage containers and source changers. The maximum...

10 CFR 34.21 - Limits on external radiation levels from storage containers and source changers.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 1 2010-01-01 2010-01-01 false Limits on external radiation levels from storage... INDUSTRIAL RADIOGRAPHY AND RADIATION SAFETY REQUIREMENTS FOR INDUSTRIAL RADIOGRAPHIC OPERATIONS Equipment § 34.21 Limits on external radiation levels from storage containers and source changers. The maximum...

10 CFR 34.21 - Limits on external radiation levels from storage containers and source changers.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 1 2013-01-01 2013-01-01 false Limits on external radiation levels from storage... INDUSTRIAL RADIOGRAPHY AND RADIATION SAFETY REQUIREMENTS FOR INDUSTRIAL RADIOGRAPHIC OPERATIONS Equipment § 34.21 Limits on external radiation levels from storage containers and source changers. The maximum...

75 FR 53846 - Airworthiness Directives; Thielert Aircraft Engines GmbH (TAE) Models TAE 125-01 and TAE 125-02...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-02

... Engines Installed In, But Not Limited To, Diamond Aircraft Industries Model DA 42 Airplanes; Correction..., Diamond Aircraft Industries model DA 42 airplanes. The part number for engine model TAE 125-01 is missing...-99 reciprocating engines, installed in, but not limited to, Diamond Aircraft Industries model DA 42...

Laser-Compton photon radiography for nondestructive test of bulk materials

NASA Astrophysics Data System (ADS)

Toyokawa, Hiroyuki; Ohgaki, Hideaki; Kudo, Katshuhisa; Takeda, Naoto; Mikado, Tomohisa; Yamada, Kawakatsu

2001-12-01

Experimental results of transmission photon radiography of bulk materials using the laser-Compton photon beam in the energy range of 2-20 MeV are given. The purpose of this work is to demonstrate the effectiveness and to survey a potential need and a technical limit of the present method for industrial application, such as nondestructive test of bulk materials. Several radiographs of metals, ceramics, and concrete were measured with the present method. Position resolution of the system was measured with using 10 MeV photon beam and slit. It was less than 1 mm.

A Reliable Handoff Mechanism for Mobile Industrial Wireless Sensor Networks.

PubMed

Ma, Jian; Yang, Dong; Zhang, Hongke; Gidlund, Mikael

2017-08-04

With the prevalence of low-power wireless devices in industrial applications, concerns about timeliness and reliability are bound to continue despite the best efforts of researchers to design Industrial Wireless Sensor Networks (IWSNs) to improve the performance of monitoring and control systems. As mobile devices have a major role to play in industrial production, IWSNs should support mobility. However, research on mobile IWSNs and practical tests have been limited due to the complicated resource scheduling and rescheduling compared with traditional wireless sensor networks. This paper proposes an effective mechanism to guarantee the performance of handoff, including a mobility-aware scheme, temporary connection and quick registration. The main contribution of this paper is that the proposed mechanism is implemented not only in our testbed but in a real industrial environment. The results indicate that our mechanism not only improves the accuracy of handoff triggering, but also solves the problem of ping-pong effect during handoff. Compared with the WirelessHART standard and the RSSI-based approach, our mechanism facilitates real-time communication while being more reliable, which can help end-to-end packet delivery remain an average of 98.5% in the scenario of mobile IWSNs.

Fundamental studies of hydrogen attack in carbon-0.5molybdenum steel and weldments applied in petroelum and petrochemical industries

NASA Astrophysics Data System (ADS)

Liu, Peng

High temperature hydrogen attack (HTHA) is a form of surface decarburization, internal decarburization, and/or intergranular cracking in steels exposed to high temperature (>400°F) and high hydrogen pressure. Hydrogen attack is an irreversible process which can cause permanent damage resulting in degradation of mechanical properties and failures such as leakage, bursting, fire, and/or explosion. The continuous progression of hydrogen attack in C-0.5Mo steel and weldments below the C-0.5Mo Nelson Curve has caused a significant concern for the integrity and serviceability of C-0.5Mo steel utilized for pressure vessels and piping in the petroleum refinery and petrochemical industries. A state-of-the-art literature review was implemented to provide a comprehensive overview of the published research efforts on hydrogen attack studies. The evolution of "Nelson Curves" for carbon steel, C-0.5Mo, and Cr-Mo steels was historically reviewed in regard to design applications and limitations. Testing techniques for hydrogen attack assessment were summarized under the categories of hydrogen exposure testing, mechanical evaluation, and dilatometric swelling testing. In accord with the demands of these industries, fundamental studies of hydrogen attack in C-0.5Mo steel and weldments were accomplished in terms of quantitative methodologies for hydrogen damage evaluation; hydrogen damage assessment of service exposed weldments and autoclave exposed materials; effects of carbon and alloying elements, heat treatments, hot and cold working, welding processes and postweld heat treatment (PWHT) on hydrogen attack susceptibility; development of continuous cooling transformation (CCT) diagrams for C-0.5Mo base metals and the coarse grained heat-affected zone (CGHAZ); carbide evaluation for the C-0.5Mo steel after service exposure and heat treatment; methane evolution by the reaction of hydrogen and carbides; hydrogen diffusion and methane pressure through the wall thickness of one-sided hydrogen exposure assembly; hydrogen attack mechanism and hydrogen attack limit modeling.

A tiered approach to the use of alternatives to animal testing for the safety assessment of cosmetics: eye irritation.

PubMed

McNamee, Pauline; Hibatallah, Jalila; Costabel-Farkas, Margit; Goebel, Carsten; Araki, Daisuke; Dufour, Eric; Hewitt, Nicola J; Jones, Penny; Kirst, Annette; Le Varlet, Béatrice; Macfarlane, Martin; Marrec-Fairley, Monique; Rowland, Joanna; Schellauf, Florian; Scheel, Julia

2009-07-01

The need for alternative approaches to replace the in vivo rabbit Draize eye test for evaluation of eye irritation of cosmetic ingredients has been recognised by the cosmetics industry for many years. Extensive research has lead to the development of several assays, some of which have undergone formal validation. Even though, to date, no single in vitro assay has been validated as a full replacement for the rabbit Draize eye test, organotypic assays are accepted for specific and limited regulatory purposes. Although not formally validated, several other in vitro models have been used for over a decade by the cosmetics industry as valuable tools in a weight of evidence approach for the safety assessment of ingredients and finished products. In light of the deadlines established in the EU Cosmetics Directive for cessation of animal testing for cosmetic ingredients, a COLIPA scientific meeting was held in Brussels on 30th January, 2008 to review the use of alternative approaches and to set up a decision-tree approach for their integration into tiered testing strategies for hazard and safety assessment of cosmetic ingredients and their use in products. Furthermore, recommendations are given on how remaining data gaps and research needs can be addressed.

Direct-to-consumer genetic testing: perceptions, problems, and policy responses.

PubMed

Caulfield, Timothy; McGuire, Amy L

2012-01-01

Direct-to-consumer (DTC) genetic testing has attracted a great amount of attention from policy makers, the scientific community, professional groups, and the media. Although it is unclear what the public demand is for these services, there does appear to be public interest in personal genetic risk information. As a result, many commentators have raised a variety of social, ethical, and regulatory issues associated with this emerging industry, including privacy issues, ensuring that DTC companies provide accurate information about the risks and limitations of their services, the possible adverse impact of DTC genetic testing on healthcare systems, and concern about how individuals may interpret and react to genetic risk information.

Pilot study on the effectiveness and students' attitude towards undergraduate training provided by industry.

PubMed

Karl, M; Franz, M; Grobecker-Karl, T; Scheib, M

2017-11-13

Rapid developments in CAD/CAM technology necessitate the adaptation of curriculum content. Limited resources hinder institutions in holding state of the art equipment available for student training. A workshop given by an industry partner was organised as part of the final pre-clinical course in prosthodontics for the academic years 2015 and 2016. The workshop on dental ceramics and CAD/CAM technology comprised of lectures and practical demonstrations. Multiple-choice examinations prior to and after the workshop as well as questionnaires were used for assessing effectiveness and students' perception. The test scores and evaluation results were compared using Fisher's exact test of homogeneity (α = 0.05). The workshop improved students' performance in the written examination. With the exception of 1 question, students having attended the workshop performed significantly better (P < .05). The majority of students felt that the workshop fostered their knowledge in the field of dental ceramics and CAD/CAM. Whilst only a small portion (<10%) disapproved industry-supported education, up to 45% of the participants considered the workshop as sales promotion. The students were undecided on whether or not competitor companies should be invited to present on the same topic and whether or not more industry-supported courses would be beneficial. Industry-supported education appears to be a necessity in the field of CAD/CAM dentistry, but care has to be taken to select adequate partners, and the content of courses has to be controlled. © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Terahertz thickness measurements for real industrial applications: from automotive paints to aerospace industry (Conference Presentation)

NASA Astrophysics Data System (ADS)

Krimi, Soufiene; Beigang, René

2017-02-01

In this contribution, we present a highly accurate approach for real-time thickness measurements of multilayered coatings using terahertz time domain spectroscopy in reflection geometry. The proposed approach combines the benefits of a model-based material parameters extraction method to calibrate the specimen under test, a generalized modeling method to simulate the terahertz radiation behavior within arbitrary thin films, and the robustness of a powerful evolutionary optimization algorithm to increase the sensitivity and the precision of the minimum thickness measurement limit. Furthermore, a novel self-calibration model is introduced, which takes into consideration the real industrial challenges such as the effect of wet-on-wet spray in the car painting process and the influence of the spraying conditions and the sintering process on ceramic thermal barrier coatings (TBCs) in aircraft industry. In addition, the developed approach enables for some applications the simultaneous determination of the complex refractive index and the coating thickness. Hence, a pre-calibration of the specimen under test is not required for such cases. Due to the high robustness of the self-calibration method and the genetic optimization algorithms, the approach has been successfully applied to resolve individual layer thicknesses within multi-layered coated samples down to less than 10 µm. The regression method can be applied in time-domain, frequency-domain or in both the time and frequency-domain simultaneously. The data evaluation uses general-purpose computing on graphics processing units and thanks to the developed highly parallelized algorithm lasts less than 300 ms. Thus, industrial requirements for fast thickness measurements with an "every-second-cycle" can be fulfilled.

If we designed airplanes like we design drugs…

NASA Astrophysics Data System (ADS)

Woltosz, Walter S.

2012-01-01

In the early days, airplanes were put together with parts designed for other purposes (bicycles, farm equipment, textiles, automotive equipment, etc.). They were then flown by their brave designers to see if the design would work—often with disastrous results. Today, airplanes, helicopters, missiles, and rockets are designed in computers in a process that involves iterating through enormous numbers of designs before anything is made. Until very recently, novel drug-like molecules were nearly always made first like early airplanes, then tested to see if they were any good (although usually not on the brave scientists who created them!). The resulting extremely high failure rate is legendary. This article describes some of the evolution of computer-based design in the aerospace industry and compares it with the progress made to date in computer-aided drug design. Software development for pharmaceutical research has been largely entrepreneurial, with only relatively limited support from government and industry end-user organizations. The pharmaceutical industry is still about 30 years behind aerospace and other industries in fully recognizing the value of simulation and modeling and funding the development of the tools needed to catch up.

If we designed airplanes like we design drugs....

PubMed

Woltosz, Walter S

2012-01-01

In the early days, airplanes were put together with parts designed for other purposes (bicycles, farm equipment, textiles, automotive equipment, etc.). They were then flown by their brave designers to see if the design would work--often with disastrous results. Today, airplanes, helicopters, missiles, and rockets are designed in computers in a process that involves iterating through enormous numbers of designs before anything is made. Until very recently, novel drug-like molecules were nearly always made first like early airplanes, then tested to see if they were any good (although usually not on the brave scientists who created them!). The resulting extremely high failure rate is legendary. This article describes some of the evolution of computer-based design in the aerospace industry and compares it with the progress made to date in computer-aided drug design. Software development for pharmaceutical research has been largely entrepreneurial, with only relatively limited support from government and industry end-user organizations. The pharmaceutical industry is still about 30 years behind aerospace and other industries in fully recognizing the value of simulation and modeling and funding the development of the tools needed to catch up.

Field Evaluation of Particle Counter Technology for Aviation Fuel Contamination Detection - Fort Rucker

DTIC Science & Technology

2013-06-20

Automatic Particle Counter, cleanliness, free water, Diesel 16. SECURITY CLASSIFICATION OF: 17. LIMITATION OF ABSTRACT none 18. NUMBER OF PAGES...Governmental transfer receipts and 1.0 mg/L on issue to aircraft, or up to 10 mg/L for product used as a diesel product for ground use (1). Free...industry. The International Organization for Standardization (ISO) has published several methods and test procedures for the calibration and use of

Japan’s Nuclear Future: Policy Debate, Prospects, and U.S. Interests

DTIC Science & Technology

2008-05-09

raised in particular over the construction of an industrial- scale reprocessing facility in Japan,. Additionally, fast breeder reactors also produce more...Nuclear Fuel Cycle Engineering Laboratories. 10 A fast breeder reactor is a fast neutron reactor that produces more plutonium than it consumes, which can...Japan Nuclear Fuel Limited (JNFL) has built and is currently running active testing on a large - scale commercial reprocessing plant at Rokkasho-mura

XV-15 Low-Noise Terminal Area Operations Testing

NASA Technical Reports Server (NTRS)

Edwards, B. D.

1998-01-01

Test procedures related to XV-15 noise tests conducted by NASA-Langley and Bell Helicopter Textron, Inc. are discussed. The tests. which took place during October and November 1995, near Waxahachie, Texas, documented the noise signature of the XV-15 tilt-rotor aircraft at a wide variety of flight conditions. The stated objectives were to: -provide a comprehensive acoustic database for NASA and U.S. Industry -validate noise prediction methodologies, and -develop and demonstrate low-noise flight profiles. The test consisted of two distinct phases. Phase 1 provided an acoustic database for validating analytical noise prediction techniques; Phase 2 directly measured noise contour information at a broad range of operating profiles, with emphasis on minimizing 'approach' noise. This report is limited to a documentation of the test procedures, flight conditions, microphone locations, meteorological conditions, and test personnel used in the test. The acoustic results are not included.

The ceramics industry and lead poisoning. Long-term testing.

PubMed

De Rosa, E; Rossi, A; Toffolo, D; Brighenti, F; Rosa, A; Caroldi, S

1980-12-01

The investigation evaluates the efficiency attributed to some measures (improvements in environment, individual health habits) in reducing the risk of lead poisoning in the ceramics industry. The evaluation of the average levels of lead in the blood of 154 exposed workers was carried out in four plants at a time interval of six to eight months. The study considers the variations in relation to possible measures brought about during the interval. A reduction of environmental risk was in effect shown by a clear improvement in the blood lead levels, which still, however, exceeded the internationally recommended limits in many of the subjects. It was concluded that further improvements can only be made by reducing the lead content of the glazes used.

Towards industrial ultrafast laser microwelding: SiO2 and BK7 to aluminum alloy.

PubMed

Carter, Richard M; Troughton, Michael; Chen, Jianyong; Elder, Ian; Thomson, Robert R; Daniel Esser, M J; Lamb, Robert A; Hand, Duncan P

2017-06-01

We report systematic analysis and comparison of ps-laser microwelding of industry relevant Al6082 parts to SiO 2 and BK7. Parameter mapping of pulse energy and focal depth on the weld strength is presented. The welding process was found to be strongly dependent on the focal plane but has a large tolerance to variation in pulse energy. Accelerated lifetime tests by thermal cycling from -50° to +90°C are presented. Welds in Al6082-BK7 parts survive over the full temperature range where the ratio of thermal expansion coefficients is 3.4:1. Welds in Al6082-SiO 2 parts (ratio 47.1:1) survive only a limited temperature range.

Purification and characterization of recombinant supersweet protein thaumatin II from tomato fruit.

PubMed

Firsov, Aleksey; Shaloiko, Lyubov; Kozlov, Oleg; Vinokurov, Leonid; Vainstein, Alexander; Dolgov, Sergey

2016-07-01

Thaumatin, a supersweet protein from the African plant katemfe (Thaumatococcus daniellii Benth.), is a promising zero-calorie sweetener for use in the food and pharmaceutical industries. Due to limited natural sources of thaumatin, its production using transgenic plants is an advantageous alternative. We report a simple protocol for purification of recombinant thaumatin II from transgenic tomato. Thaumatin was extracted from ripe tomato fruit in a low-salt buffer and purified on an SP-Sephacryl column. Recombinant thaumatin yield averaged 50 mg/kg fresh fruit. MALDI-MS analysis showed correct processing of thaumatin in tomato plants. The recombinant thaumatin was indistinguishable from the native protein in a taste test. The purified tomato-derived thaumatin had an intrinsic sweetness with a threshold value in taste tests of around 50 nM. These results demonstrate the potential of an expression system based on transgenic tomato plants for production of recombinant thaumatin for the food and pharmaceutical industries. Copyright © 2016 Elsevier Inc. All rights reserved.

Assessing the Risk of Crew Injury Due to Dynamic Loads During Spaceflight

NASA Technical Reports Server (NTRS)

Somers, J. T.; Gernhardt, M.; Newby, N.

2014-01-01

Spaceflight requires tremendous amounts of energy to achieve Earth orbit and to attain escape velocity for interplanetary missions. Although the majority of the energy is managed in such a way as to limit the accelerations on the crew, several mission phases may result in crew exposure to dynamic loads. In the automotive industry, risk of serious injury can be tolerated because the probability of a crash is remote each time a person enters a vehicle, resulting in a low total risk of injury. For spaceflight, the level of acceptable injury risk must be lower to achieve a low total risk of injury because the dynamic loads are expected on each flight. To mitigate the risk of injury due to dynamic loads, the NASA Human Research Program has developed a research plan to inform the knowledge gaps and develop relevant tools for assessing injury risk. The risk of injury due to dynamic loads can be further subdivided into extrinsic and intrinsic risk factors. Extrinsic risk factors include the vehicle dynamic profile, seat and restraint design, and spacesuit design. Human tolerance to loads varies considerably depending on the direction, amplitude, and rise-time of acceleration therefore the orientation of the body to the dynamic vector is critical to determining crew risk of injury. Although a particular vehicle dynamic profile may be safe for a particular design, the seat, restraint, and suit designs can affect the risk of injury due to localized effects. In addition, characteristics intrinsic to the crewmember may also contribute to the risk of injury, such as crewmember sex, age, anthropometry, and deconditioning due to spaceflight, and each astronaut may have a different risk profile because of these factors. The purpose of the research plan is to address any knowledge gaps in the risk factors to mitigate injury risk. Methods for assessing injury risk have been well documented in other analogous industries and include human volunteer testing, human exposure to dynamic environments, post-mortem human subject (PMHS) testing, animal testing, anthropomorphic test devices (ATD), dynamic models of the human, numerical models of ATDs, and numerical models of the human. Each has inherent strengths and limitations. For example, human volunteer testing is advantageous because a population can be selected that is similar to the astronaut corps; however, because of the inherent ethical limitations, only sub-injurious conditions can be tested. PMHSs can be tested in a variety of conditions including injurious levels, but the responses are not completely analogous to living human subjects. In addition, it is exceedingly difficult to select a PMHS population that is similar to the astronaut corps. ATDs are currently widely used in the automotive industry and military because they are highly repeatable and durable. Unfortunately, because they are mechanical models of the human body, the biofidelity of the responses are limited to dynamic conditions used to validate the ATD. Numerical models of the ATD, in addition to the strengths and limitations for ATDs, are easy to use for a variety of designs before a design is fabricated, but also have additional limitations for ATDs, are easy to use for a variety of designs before a design is fabricated, but also have additional uncertainty. Dynamic models are simple and easy to use, but do not account for localized effects of the seat and suit. Finally, numerical models of the human have the potential to have the most advantages; however, the current models are not validated for the conditions expected during spaceflight. To properly assess spaceflight conditions with numerical human models, human data would be needed to optimize the model responses for those conditions. Using the appropriate assessment method with the knowledge gained for each risk factor, an appropriate approach for mitigating the risk of injury due to dynamic loads can be developed ensuring crew safety in future NASA vehicles.

Genotoxicity of carbon nanofibers: Are they potentially more or less dangerous than carbon nanotubes or asbestos?

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kisin, E.R.; Murray, A.R.; Sargent, L.

The production of carbon nanofibers and nanotubes (CNF/CNT) and their composite products is increasing globally. CNF are generating great interest in industrial sectors such as energy production and electronics, where alternative materials may have limited performance or are produced at a much higher cost. However, despite the increasing industrial use of carbon nanofibers, information on their potential adverse health effects is limited. In the current study, we examine the cytotoxic and genotoxic potential of carbon-based nanofibers (Pyrograf (registered) -III) and compare this material with the effects of asbestos fibers (crocidolite) or single-walled carbon nanotubes (SWCNT). The genotoxic effects in themore » lung fibroblast (V79) cell line were examined using two complementary assays: the comet assay and micronucleus (MN) test. In addition, we utilized fluorescence in situ hybridization to detect the chromatin pan-centromeric signals within the MN indicating their origin by aneugenic (chromosomal malsegregation) or clastogenic (chromosome breakage) mechanisms. Cytotoxicity tests revealed a concentration- and time-dependent loss of V79 cell viability after exposure to all tested materials in the following sequence: asbestos > CNF > SWCNT. Additionally, cellular uptake and generation of oxygen radicals was seen in the murine RAW264.7 macrophages following exposure to CNF or asbestos but not after administration of SWCNT. DNA damage and MN induction were found after exposure to all tested materials with the strongest effect seen for CNF. Finally, we demonstrated that CNF induced predominately centromere-positive MN in primary human small airway epithelial cells (SAEC) indicating aneugenic events. Further investigations are warranted to elucidate the possible mechanisms involved in CNF-induced genotoxicity.« less

Structural Analysis Made 'NESSUSary'

NASA Technical Reports Server (NTRS)

2005-01-01

Everywhere you look, chances are something that was designed and tested by a computer will be in plain view. Computers are now utilized to design and test just about everything imaginable, from automobiles and airplanes to bridges and boats, and elevators and escalators to streets and skyscrapers. Computer-design engineering first emerged in the 1970s, in the automobile and aerospace industries. Since computers were in their infancy, however, architects and engineers during the time were limited to producing only designs similar to hand-drafted drawings. (At the end of 1970s, a typical computer-aided design system was a 16-bit minicomputer with a price tag of $125,000.) Eventually, computers became more affordable and related software became more sophisticated, offering designers the "bells and whistles" to go beyond the limits of basic drafting and rendering, and venture into more skillful applications. One of the major advancements was the ability to test the objects being designed for the probability of failure. This advancement was especially important for the aerospace industry, where complicated and expensive structures are designed. The ability to perform reliability and risk assessment without using extensive hardware testing is critical to design and certification. In 1984, NASA initiated the Probabilistic Structural Analysis Methods (PSAM) project at Glenn Research Center to develop analysis methods and computer programs for the probabilistic structural analysis of select engine components for current Space Shuttle and future space propulsion systems. NASA envisioned that these methods and computational tools would play a critical role in establishing increased system performance and durability, and assist in structural system qualification and certification. Not only was the PSAM project beneficial to aerospace, it paved the way for a commercial risk- probability tool that is evaluating risks in diverse, down- to-Earth application

Energy and the English Industrial Revolution.

PubMed

Wrigley, E A

2013-03-13

Societies before the Industrial Revolution were dependent on the annual cycle of plant photosynthesis for both heat and mechanical energy. The quantity of energy available each year was therefore limited, and economic growth was necessarily constrained. In the Industrial Revolution, energy usage increased massively and output rose accordingly. The energy source continued to be plant photosynthesis, but accumulated over a geological age in the form of coal. This poses a problem for the future. Fossil fuels are a depleting stock, whereas in pre-industrial time the energy source, though limited, was renewed each year.

Response Time Analysis and Test of Protection System Instrument Channels for APR1400 and OPR1000

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lee, Chang Jae; Han, Seung; Yun, Jae Hee

2015-07-01

Safety limits are required to maintain the integrity of physical barriers designed to prevent the uncontrolled release of radioactive materials in nuclear power plants. The safety analysis establishes two critical constraints that include an analytical limit in terms of a measured or calculated variable, and a specific time after the analytical limit is reached to begin protective action. Keeping with the nuclear regulations and industry standards, satisfying these two requirements will ensure that the safety limit will not be exceeded during the design basis event, either an anticipated operational occurrence or a postulated accident. Various studies on the setpoint determinationmore » methodology for the safety-related instrumentation have been actively performed to ensure that the requirement of the analytical limit is satisfied. In particular, the protection setpoint methodology for the advanced power reactor 1400 (APP1400) and the optimized power reactor 1000 (OPR1000) has been recently developed to cover both the design basis event and the beyond design basis event. The developed setpoint methodology has also been quantitatively validated using specific computer programs and setpoint calculations. However, the safety of nuclear power plants cannot be fully guaranteed by satisfying the requirement of the analytical limit. In spite of the response time verification requirements of nuclear regulations and industry standards, it is hard to find the studies on the systematically integrated methodology regarding the response time evaluation. In cases of APR1400 and OPR1000, the response time analysis for the plant protection system is partially included in the setpoint calculation and the response time test is separately performed via the specific plant procedure. The test technique has a drawback which is the difficulty to demonstrate completeness of timing test. The analysis technique has also a demerit of resulting in extreme times that not actually possible. Thus, the establishment of the systematic response time evaluation methodology is needed to justify the conformance to the response time requirement used in the safety analysis. This paper proposes the response time evaluation methodology for APR1400 and OPR1000 using the combined analysis and test technique to confirm that the plant protection system can meet the analytical response time assumed in the safety analysis. In addition, the results of the quantitative evaluation performed for APR1400 and OPR1000 are presented in this paper. The proposed response time analysis technique consists of defining the response time requirement, determining the critical signal path for the trip parameter, allocating individual response time to each component on the signal path, and analyzing the total response time for the trip parameter, and demonstrates that the total analyzed response time does not exceed the response time requirement. The proposed response time test technique is composed of defining the response time requirement, determining the critical signal path for the trip parameter, determining the test method for each component on the signal path, performing the response time test, and demonstrates that the total test result does not exceed the response time requirement. The total response time should be tested in a single test that covers from the sensor to the final actuation device on the instrument channel. When the total channel is not tested in a single test, separate tests on groups of components or single components including the total instrument channel shall be combined to verify the total channel response. For APR1400 and OPR1000, the ramp test technique is used for the pressure and differential pressure transmitters and the step function testing technique is applied to the signal processing equipment and final actuation device. As a result, it can be demonstrated that the response time requirement is satisfied by the combined analysis and test technique. Therefore, the proposed methodology in this paper plays a crucial role in guaranteeing the safety of the nuclear power plants systematically satisfying one of two critical requirements from the safety analysis. (authors)« less

Methods for the Identification of Aircraft Tubing of Plain Carbon Steel and Chromium-Molybdenum Steel

NASA Technical Reports Server (NTRS)

Mutchler, W H; Buzzard, R W

1930-01-01

The survey of the possibilities for distinguishing between plain carbon and chromium-molybdenum steel tubing included the Herbert pendulum hardness, magnetic, sparks, and chemical tests. The Herbert pendulum test has the disadvantages of all hardness tests in being limited to factory use and being applicable only to scale-free, normalized material. The small difference in the range of hardness values between plain carbon and chromium-molybdenum steels is likewise a disadvantage. The Rockwell hardness test, at present used in the industry for this purpose, is much more reliable. It may be concluded on the basis of the experiments performed that of all methods surveyed, spark testing appears to be, at present, the most suitable for factory use from the standpoint of speed, accuracy, nondestructiveness and reliability. It is also applicable for field use.

Space technology transfer to developing countries: opportunities and difficulties

NASA Astrophysics Data System (ADS)

Leloglu, U. M.; Kocaoglan, E.

Space technology, with its implications on science, economy and security, is mostly chosen as one of the priority areas for technological development by developing countries. Most nations aspiring to begin playing in the space league prefer technology transfer programs as a first step. Decreasing initial costs by small satellite technology made this affordable for many countries. However, there is a long way from this first step to establishment of a reliable space industry that can both survive in the long term with limited financial support from the government and meet national needs. This is especially difficult when major defense companies of industrialized countries are merging to sustain their competitiveness. The prerequisites for the success are implementation of a well-planned space program and existence of industrialization that can support basic testing and manufacturing activities and supply qualified manpower. In this study, the difficulties to be negotiated and the vicious circles to be broken for latecomers, that is, developing countries that invest on space technologies are discussed. Especially, difficulties in the technology transfer process itself, brain drain from developing countries to industrialized countries, strong competition from big space companies for domestic needs, costs of establishing and maintaining an infrastructure necessary for manufacturing and testing activities, and finally, the impact of export control will be emphasized. We will also try to address how and to what extent collaboration can solve or minimize these problems. In discussing the ideas mentioned above, lessons learned from the BILSAT Project, a technology transfer program from the UK, will be referred.

Field Evaluation of Particle Counter Technology for Aviation Fuel Contamination Detection - Fort Campbell

DTIC Science & Technology

2013-06-06

Counter, cleanliness, free water, Diesel 16. SECURITY CLASSIFICATION OF: 17. LIMITATION OF ABSTRACT none 18. NUMBER OF PAGES 31 19a. NAME OF...L for Intra-Governmental transfer receipts and 1.0 mg/L on issue to aircraft, or up to 10 mg/L for product used as a diesel product for ground use...hydraulic fluid industry. The International Organization for Standardization (ISO) has published several methods and test procedures for the calibration and

A Testing Service for Industry

NASA Technical Reports Server (NTRS)

1994-01-01

A small isolated NASA facility provides assistance to industry in the design, testing, and operation of oxygen systems. White Sands Test Facility (WSTF) was originally established to test rocket propulsion systems for the Apollo program. The facility's role was later expanded into testing characterization, flammability and toxicity characteristics of materials. Its materials and components test methods were adopted by the American society for Testing and Materials. When research and testing results became known, industry requested assistance, and in 1980, NASA authorized WSTF to open its facility to private firms, a valuable service, as oxygen systems testing is often too expensive and too hazardous for many companies. Today, some of the best known American industries utilize White Sands testing capabilities.

Development of antifouling surfaces to reduce bacterial attachment

NASA Astrophysics Data System (ADS)

Graham, Mary Viola

Bacteria are exceptionally good at adhering to surfaces and forming complex structures known as biofilms. This process, known as biofouling, can cause problems for infrastructure (eg, clogging and damaging pipes), for the food industry (eg, contamination of processing surfaces and equipment, and for the medical industry (eg, contamination of indwelling medical devices). Accordingly, multiple strategies have been explored to combat biofouling, including chemical modification of surfaces, development of antibiotic coatings, and more recently, the use of engineered surface topography. When designed properly, engineered surface topographies can significantly reduce bacterial surface attachment, ultimately limiting surface colonization. In this work, we hypothesized that the morphology, size, spacing, and surface pre-treatment of topographical features should directly correlate with the size and shape of target organisms, in order to reduce biofouling. Topographical features with size and spacing from 0.25 to 2 mum were fabricated in silicone elastomer and tested against rod shaped bacteria with an average size of 0.5 x 2 mum and spherical bacteria (cocci) ranging from 0.5 - 1 μm in diameter. Antifouling properties of the different topographical features were tested in both static and flow-based assays, and under oxygen plasma-treated (hydrophilic) and untreated (hydrophobic) surface conditions. We found that surface pre-treatment universally affects the ability bacteria to attach to surfaces, while surface topography limits attachment in a manner dependent on the bacterial size/shape and the size/spacing of the topography.

New Modelling of Localized Necking in Sheet Metal Stretching

NASA Astrophysics Data System (ADS)

Bressan, José Divo

2011-01-01

Present work examines a new mathematical model to predict the onset of localized necking in the industrial processes of sheet metal forming such as biaxial stretching. Sheet metal formability is usually assessed experimentally by testing such as the Nakajima test to obtain the Forming Limit Curve, FLC, which is an essential material parameter necessary to numerical simulations by FEM. The Forming Limit Diagram or "Forming Principal Strain Map" shows the experimental FLC which is the plot of principal true strains in the sheet metal surface, ɛ1 and ɛ2, occurring at critical points obtained in laboratory formability tests or in the fabrication process. Two types of undesirable rupture mechanisms can occur in sheet metal forming products: localized necking and shear induced fracture. Therefore, two kinds of limit strain curves can be plotted: the local necking limit curve FLC-N and the shear fracture limit curve FLC-S. Localized necking is theoretically anticipated to initiate at a thickness defect ƒin = hib/hia inside the grooved sheet thickness hia, but only at the instability point of maximum load. The inception of grooving on the sheet surface evolves from instability point to localized necking and final rupture, during further sheet metal straining. Work hardening law is defined for a strain and strain rate material by the effective stress σ¯ = σo(1+βɛ¯)n???ɛM. The average experimental hardening law curve for tensile tests at 0°, 45° and 90°, assuming isotropic plasticity, was used to analyze the plasticity behavior during the biaxial stretching of sheet metals. Theoretical predicted curves of local necking limits are plotted in the positive quadrant of FPSM for different defect values ƒin and plasticity parameters. Limit strains are obtained from a software developed by the author. Some experimental results of forming limit curve obtained from experiments for IF steel sheets are compared with the theoretical predicted curves: the correlation is good.

Fungal treatment of humic-rich industrial wastewater: application of white rot fungi in remediation of food-processing wastewater.

PubMed

Zahmatkesh, Mostafa; Spanjers, Henri; van Lier, Jules B

2017-11-01

This paper presents the results of fungal treatment of a real industrial wastewater (WW), providing insight into the main mechanisms involved and clarifying some ambiguities and uncertainties in the previous reports. In this regard, the mycoremediation potentials of four strains of white rot fungi (WRF): Phanerochaete chrysosporium, Trametes versicolor, Pleurotus ostreatus and Pleurotus pulmonarius were tested to remove humic acids (HA) from a real humic-rich industrial treated WW of a food-processing plant. The HA removal was assessed by color measurement and size-exclusion chromatography (SEC) analysis. T. versicolor showed the best decolorization efficiency of 90% and yielded more than 45% degradation of HA, which was the highest among the tested fungal strains. The nitrogen limitation was studied and results showed that it affected the fungal extracellular laccase and manganese peroxidase (MnP) activities. The results of the SEC analysis revealed that the mechanism of HA removal by WRF involves degradation of large HA molecules to smaller molecules, conversion of HA to fulvic acid-like molecules and also biosorption of HA by fungal mycelia. The effect of HS on the growth of WRF was investigated and results showed that the inhibition or stimulation of growth differs among the fungal strains.

A Study on Infrared Local Heat Treatment for AA5083 to Improve Formability and Automotive Part Forming

NASA Astrophysics Data System (ADS)

Lee, Eun-Ho; Yang, Dong-Yol; Ko, SeJin

2017-10-01

Automotive industries are increasingly employing aluminum alloys for auto parts to reduce vehicle weight. However, the low formability of aluminum alloys has been an obstacle to their application. To resolve the formability problem, some studies involving heat treatments under laboratory conditions have been reported. However, for industrial applications, the heat treatment sequence, heating energy efficiency, and a commercial part test should be studied. This work shows an infrared (IR) local heat treatment, heating only small areas where the heat treatment is required, for an aluminum alloy to improve the formability with a reduction of heating energy. The experiment shows that the formability drastically increases when the aluminum alloy is heat treated between two forming stages, referred to as intermediate heat treatment. The microstructures of the test pieces are evaluated to identify the cause of the increase in the formability. For an industrial application, an aluminum tailgate, which cannot be manufactured without heat treatment, was successfully manufactured by the IR local heat treatment with a reduction of energy. A simulation was also conducted with a stress-based forming limit diagram, which is not affected by the strain path and heat treatment histories. The simulation gives a good prediction of the formability improvement.

Substitute fluid examinations for liquid manure

NASA Astrophysics Data System (ADS)

Schrader, Kevin; Riedel, Marco; Eichert, Helmut

For the farming industry it is essential to use liquid manure as natural fertilizer. Through new agricultural regulation 2015 in Germany the industry must develop new liquid manure spreader systems because the ammonia and methane emission are limited. In a research project the University of Applied Sciences Zwickau and some other industry partners will develop such a new innovative liquid manure spreader. The new liquid manure spreader should use pulsating air to distribute the liquid manure exactly. The pulsating air, which flows through the pipelines, should be analysed at a test station. For examinations at this test station it is important to find another substitute fluid because liquid manure smells strong, is not transparent and is also not homogeneous enough for scientific investigations. Furthermore it is important to ensure that the substitute fluid is, like liquid manure, a non-Newtonian fluid. The substitute fluid must be a shear-thinning substance - this means the viscosity decrease at higher shear rate. Many different samples like soap-water-farragoes, jelly-water-farragoes, agar-water-farragoes, soap-ethanol-farragoes and more are, for the project, examined in regard of their physical properties to find the best substitute fluid. The samples are examined at the rotational viscometer for viscosity at various shear rates and then compared with the viscosity values of liquid manure.

Thermal exploitation of wastes with lignite for energy production.

PubMed

Grammelis, Panagiotis; Kakaras, Emmanuel; Skodras, George

2003-11-01

The thermal exploitation of wastewood with Greek lignite was investigated by performing tests in a laboratory-scale fluidized bed reactor, a 1-MW(th) semi-industrial circulating fluidized bed combustor, and an industrial boiler. Blends of natural wood, demolition wood, railroad sleepers, medium-density fiberboard residues, and power poles with lignite were used, and the co-combustion efficiency and the effect of wastewood addition on the emitted pollutants were investigated. Carbon monoxide, sulfur dioxide, and oxides of nitrogen emissions were continuously monitored, and, during the industrial-scale tests, the toxic emissions (polychlorinated dibenzodioxins and dibenzofurans and heavy metals) were determined. Ash samples were analyzed for heavy metals in an inductively coupled plasma-atomic emission spectroscopy spectrophotometer. Problems were observed during the preparation of wastewood, because species embedded with different compounds, such as railway sleepers and demolition wood, were not easily treated. All wastewood blends were proven good fuels; co-combustion proceeded smoothly and homogeneous temperature and pressure profiles were obtained. Although some fluctuations were observed, low emissions of gaseous pollutants were obtained for all fuel blends. The metal element emissions (in the flue gases and the solid residues) were lower than the legislative limits. Therefore, wastewood co-combustion with lignite can be realized, provided that the fuel handling and preparation can be practically performed in large-scale installations.

Lead paste recycling based on conversion into battery grade oxides. Electrochemical tests and industrial production of new batteries

NASA Astrophysics Data System (ADS)

Fusillo, G.; Rosestolato, D.; Scura, F.; Cattarin, S.; Mattarozzi, L.; Guerriero, P.; Gambirasi, A.; Brianese, N.; Staiti, P.; Guerriero, R.; La Sala, G.

2018-03-01

We present the preparation and characterization of pure lead monoxide obtained through recycling of the lead paste recovered from exhausted lead acid batteries. The recycling is based on a hydrometallurgical procedure reported in a STC Patent, that includes simple chemical operations (desulphurisation, leaching, precipitation, filtration) and a final thermal conversion. Materials obtained by treatment at 600 °C consist predominantly of β-PbO. The electrochemical behaviour of Positive Active Mass (PAM) prepared from different materials (or mixtures) is then investigated and compared. An optimized oxide material, obtained by prolonged (8 h) thermal treatment at 600 °C, consists of pure β-PbO and appears suitable for preparation of battery elements, alone or in mixture with a small fraction (10%-30%) of traditional industrial leady oxide. The resulting battery performances are similar to those obtained from pure leady oxide. In comparison with traditional recycling processes, the proposed method guarantees lower energy consumption, limited environmental impact and reduced operating risk for industry workers.

Shelf-life dating of shelf-stable strawberry juice based on survival analysis of consumer acceptance information.

PubMed

Buvé, Carolien; Van Bedts, Tine; Haenen, Annelien; Kebede, Biniam; Braekers, Roel; Hendrickx, Marc; Van Loey, Ann; Grauwet, Tara

2018-07-01

Accurate shelf-life dating of food products is crucial for consumers and industries. Therefore, in this study we applied a science-based approach for shelf-life assessment, including accelerated shelf-life testing (ASLT), acceptability testing and the screening of analytical attributes for fast shelf-life predictions. Shelf-stable strawberry juice was selected as a case study. Ambient storage (20 °C) had no effect on the aroma-based acceptance of strawberry juice. The colour-based acceptability decreased during storage under ambient and accelerated (28-42 °C) conditions. The application of survival analysis showed that the colour-based shelf-life was reached in the early stages of storage (≤11 weeks) and that the shelf-life was shortened at higher temperatures. None of the selected attributes (a * and ΔE * value, anthocyanin and ascorbic acid content) is an ideal analytical marker for shelf-life predictions in the investigated temperature range (20-42 °C). Nevertheless, an overall analytical cut-off value over the whole temperature range can be selected. Colour changes of strawberry juice during storage are shelf-life limiting. Combining ASLT with acceptability testing allowed to gain faster insight into the change in colour-based acceptability and to perform shelf-life predictions relying on scientific data. An analytical marker is a convenient tool for shelf-life predictions in the context of ASLT. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

Nano-composites for water remediation: a review.

PubMed

Tesh, Sarah J; Scott, Thomas B

2014-09-17

As global populations continue to increase, the pressure on water supplies will inevitably intensify. Consequently the international need for more efficient and cost effective water remediation technologies will also rise. The introduction of nano-technology into the industry may represent a significant advancement and zero-valent iron nano-particles (INPs) have been thoroughly studied for potential remediation applications. However, the application of water dispersed INP suspensions is limited and somewhat contentious on the grounds of safety, whilst INP reaction mechanisms, transport properties and ecotoxicity are areas still under investigation. Theoretically, the development of nano-composites containing INPs to overcome these issues provides the logical next step for developing nano-materials that are better suited to wide application across the water industry. This review provides an overview of the range of static, bulk nano-composites containing INPs being developed, whilst highlighting the limitations of individual solutions, overall classes of technology, and lack of comparative testing for nano-composites. The review discusses what further developments are needed to optimize nano-composite water remediation systems to subsequently achieve commercial maturity. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

An electron beam linear scanning mode for industrial limited-angle nano-computed tomography.

PubMed

Wang, Chengxiang; Zeng, Li; Yu, Wei; Zhang, Lingli; Guo, Yumeng; Gong, Changcheng

2018-01-01

Nano-computed tomography (nano-CT), which utilizes X-rays to research the inner structure of some small objects and has been widely utilized in biomedical research, electronic technology, geology, material sciences, etc., is a high spatial resolution and non-destructive research technique. A traditional nano-CT scanning model with a very high mechanical precision and stability of object manipulator, which is difficult to reach when the scanned object is continuously rotated, is required for high resolution imaging. To reduce the scanning time and attain a stable and high resolution imaging in industrial non-destructive testing, we study an electron beam linear scanning mode of nano-CT system that can avoid mechanical vibration and object movement caused by the continuously rotated object. Furthermore, to further save the scanning time and study how small the scanning range could be considered with acceptable spatial resolution, an alternating iterative algorithm based on ℓ 0 minimization is utilized to limited-angle nano-CT reconstruction problem with the electron beam linear scanning mode. The experimental results confirm the feasibility of the electron beam linear scanning mode of nano-CT system.

An electron beam linear scanning mode for industrial limited-angle nano-computed tomography

NASA Astrophysics Data System (ADS)

Wang, Chengxiang; Zeng, Li; Yu, Wei; Zhang, Lingli; Guo, Yumeng; Gong, Changcheng

2018-01-01

Nano-computed tomography (nano-CT), which utilizes X-rays to research the inner structure of some small objects and has been widely utilized in biomedical research, electronic technology, geology, material sciences, etc., is a high spatial resolution and non-destructive research technique. A traditional nano-CT scanning model with a very high mechanical precision and stability of object manipulator, which is difficult to reach when the scanned object is continuously rotated, is required for high resolution imaging. To reduce the scanning time and attain a stable and high resolution imaging in industrial non-destructive testing, we study an electron beam linear scanning mode of nano-CT system that can avoid mechanical vibration and object movement caused by the continuously rotated object. Furthermore, to further save the scanning time and study how small the scanning range could be considered with acceptable spatial resolution, an alternating iterative algorithm based on ℓ0 minimization is utilized to limited-angle nano-CT reconstruction problem with the electron beam linear scanning mode. The experimental results confirm the feasibility of the electron beam linear scanning mode of nano-CT system.

Bioaugmentation: An Emerging Strategy of Industrial Wastewater Treatment for Reuse and Discharge.

PubMed

Nzila, Alexis; Razzak, Shaikh Abdur; Zhu, Jesse

2016-08-25

A promising long-term and sustainable solution to the growing scarcity of water worldwide is to recycle and reuse wastewater. In wastewater treatment plants, the biodegradation of contaminants or pollutants by harnessing microorganisms present in activated sludge is one of the most important strategies to remove organic contaminants from wastewater. However, this approach has limitations because many pollutants are not efficiently eliminated. To counterbalance the limitations, bioaugmentation has been developed and consists of adding specific and efficient pollutant-biodegrading microorganisms into a microbial community in an effort to enhance the ability of this microbial community to biodegrade contaminants. This approach has been tested for wastewater cleaning with encouraging results, but failure has also been reported, especially during scale-up. In this review, work on the bioaugmentation in the context of removal of important pollutants from industrial wastewater is summarized, with an emphasis on recalcitrant compounds, and strategies that can be used to improve the efficiency of bioaugmentation are also discussed. This review also initiates a discussion regarding new research areas, such as nanotechnology and quorum sensing, that should be investigated to improve the efficiency of wastewater bioaugmentation.

The development and testing of a linear induction motor being fed from the source with limited electric power

NASA Astrophysics Data System (ADS)

Tiunov, V. V.

2018-02-01

The report provides results of the research related to the tubular linear induction motors’ application. The motors’ design features, a calculation model, a description of test specimens for mining and electric power industry are introduced. The most attention is given to the single-phase motors for high voltage switches drives with the usage of inexpensive standard single-phase transformers for motors’ power supply. The method of the motor’s parameters determination, when the motor is being fed from the transformer, working in the overload mode, was described, and the results of it practical usage were good enough for the engineering practice.

Microstructures, Forming Limit and Failure Analyses of Inconel 718 Sheets for Fabrication of Aerospace Components

NASA Astrophysics Data System (ADS)

Sajun Prasad, K.; Panda, Sushanta Kumar; Kar, Sujoy Kumar; Sen, Mainak; Murty, S. V. S. Naryana; Sharma, Sharad Chandra

2017-04-01

Recently, aerospace industries have shown increasing interest in forming limits of Inconel 718 sheet metals, which can be utilised in designing tools and selection of process parameters for successful fabrication of components. In the present work, stress-strain response with failure strains was evaluated by uniaxial tensile tests in different orientations, and two-stage work-hardening behavior was observed. In spite of highly preferred texture, tensile properties showed minor variations in different orientations due to the random distribution of nanoprecipitates. The forming limit strains were evaluated by deforming specimens in seven different strain paths using limiting dome height (LDH) test facility. Mostly, the specimens failed without prior indication of localized necking. Thus, fracture forming limit diagram (FFLD) was evaluated, and bending correction was imposed due to the use of sub-size hemispherical punch. The failure strains of FFLD were converted into major-minor stress space ( σ-FFLD) and effective plastic strain-stress triaxiality space ( ηEPS-FFLD) as failure criteria to avoid the strain path dependence. Moreover, FE model was developed, and the LDH, strain distribution and failure location were predicted successfully using above-mentioned failure criteria with two stages of work hardening. Fractographs were correlated with the fracture behavior and formability of sheet metal.

Pyro shock simulation: Experience with the MIPS simulator

NASA Technical Reports Server (NTRS)

Dwyer, Thomas J.; Moul, David S.

1988-01-01

The Mechanical Impulse Pyro Shock (MIPS) Simulator at GE Astro Space Division is one version of a design that is in limited use throughout the aerospace industry, and is typically used for component shock testing at levels up to 10,000 response g's. Modifications to the force imput, table and component boundary conditions have allowed a range of test conditions to be achieved. Twelve different designs of components with weights up to 23 Kg are in the process or have completed qualification testing in the Dynamic Simulation Lab at GE in Valley Forge, Pa. A summary of the experience gained through the use of this simulator is presented as well as examples of shock experiments that can be readily simulated at the GE Astro MIPS facility.

Research and implementation of a new 6-DOF light-weight robot

NASA Astrophysics Data System (ADS)

Tao, Zihang; Zhang, Tao; Qi, Mingzhong; Ji, Junhui

2017-06-01

Traditional industrial robots have some weaknesses such as low payload-weight, high power consumption and high cost. These drawbacks limit their applications in such areas, special application, service and surgical robots. To improve these shortcomings, a new kind 6-DOF light-weight robot was designed based on modular joints and modular construction. This paper discusses the general requirements of the light-weight robots. Based on these requirements the novel robot is designed. The new robot is described from two aspects, mechanical design and control system. A prototype robot had developed and a joint performance test platform had designed. Position and velocity tests had conducted to evaluate the performance of the prototype robot. Test results showed that the prototype worked well.

Evaluation of the use of nodal methods for MTR neutronic analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Reitsma, F.; Mueller, E.Z.

1997-08-01

Although modern nodal methods are used extensively in the nuclear power industry, their use for research reactor analysis has been very limited. The suitability of nodal methods for material testing reactor analysis is investigated with the emphasis on the modelling of the core region (fuel assemblies). The nodal approach`s performance is compared with that of the traditional finite-difference fine mesh approach. The advantages of using nodal methods coupled with integrated cross section generation systems are highlighted, especially with respect to data preparation, simplicity of use and the possibility of performing a great variety of reactor calculations subject to strict timemore » limitations such as are required for the RERTR program.« less

Disinfection efficacy over yeast biofilms of juice processing industries.

PubMed

Tarifa, María C; Lozano, Jorge E; Brugnoni, Lorena I

2018-03-01

Membrane separation systems represent a hot - spot for biofilm formation in juice industries. Sodium hypochlorite (NaOCl) has been traditionally the disinfectant of choice; however, its effectiveness over well-established biofilms is limited. In this work the study of biofilm formation on ultrafiltration membranes was proposed. The effectiveness of cleaning and disinfection procedures commonly used in juice industry was tested on the removal and killing of cells. The species used (Rhodotorula mucilaginosa, Candida krusei, Candida kefyr and Candida tropicalis) were isolated from ultrafiltration modules of a clarified apple juice industry. Industrial concentrations of NaOCl (200mgCL∙L -1 ) showed to be effective against planktonic cultures with >4 log reductions, whereas their overall efficiency against adhered cells was smaller. Recovery of viable cell counts to initial numbers was evidenced regardless of the time of colonization. The topography of the surface showed to have an impact on the efficiency of the disinfectant, presenting membranes smaller log reductions than stainless steel (~1.09-1.53logCFU). At 200mgCl∙L -1 only membrane's cross flow recovery was reached with no long-term effect over the attached cells. The overall results demonstrated the recalcitrance of these biofilms to typical cleaning and disinfection process which may confer them with a selective advantage. Copyright © 2017 Elsevier Ltd. All rights reserved.

Toxicity Testing in the 21st Century Beyond Environmental Chemicals

PubMed Central

Rovida, Costanza; Asakura, Shoji; Daneshian, Mardas; Hofman-Huether, Hana; Leist, Marcel; Meunier, Leo; Reif, David; Rossi, Anna; Schmutz, Markus; Valentin, Jean-Pierre; Zurlo, Joanne; Hartung, Thomas

2018-01-01

Summary After the publication of the report titled Toxicity Testing in the 21st Century – A Vision and a Strategy, many initiatives started to foster a major paradigm shift for toxicity testing – from apical endpoints in animal-based tests to mechanistic endpoints through delineation of pathways of toxicity (PoT) in human cell based systems. The US EPA has funded an important project to develop new high throughput technologies based on human cell based in vitro technologies. These methods are currently being incorporated into the chemical risk assessment process. In the pharmaceutical industry, the efficacy and toxicity of new drugs are evaluated during preclinical investigations that include drug metabolism, pharmacokinetics, pharmacodynamics and safety toxicology studies. The results of these studies are analyzed and extrapolated to predict efficacy and potential adverse effects in humans. However, due to the high failure rate of drugs during the clinical phases, a new approach for a more predictive assessment of drugs both in terms of efficacy and adverse effects is getting urgent. The food industry faces the challenge of assessing novel foods and food ingredients for the general population, while using animal safety testing for extrapolation purposes is often of limited relevance. The question is whether the latest paradigm shift proposed by the Tox21c report for chemicals may provide a useful tool to improve the risk assessment approach also for drugs and food ingredients. PMID:26168280

Does Pharmacogenomic Testing Improve Clinical Outcomes for Major Depressive Disorder? A Systematic Review of Clinical Trials and Cost-Effectiveness Studies.

PubMed

Rosenblat, Joshua D; Lee, Yena; McIntyre, Roger S

2017-06-01

Pharmacogenomic testing has become scalable and available to the general public. Pharmacogenomics has shown promise for predicting antidepressant response and tolerability in the treatment of major depressive disorder (MDD). In theory, pharmacogenomics can improve clinical outcomes by guiding antidepressant selection and dosing. The current systematic review examines the extant literature to determine the impact of pharmacogenomic testing on clinical outcomes in MDD and assesses its cost-effectiveness. The MEDLINE/PubMed and Google Scholar databases were systematically searched for relevant articles published prior to October 2015. Search terms included various combinations of the following: major depressive disorder (MDD), depression, mental illness, mood disorder, antidepressant, response, remission, outcome, pharmacogenetic, pharmacogenomics, pharmacodynamics, pharmacokinetic, genetic testing, genome wide association study (GWAS), CYP450, personalized medicine, cost-effectiveness, and pharmacoeconomics. Of the 66 records identified from the initial search, relevant clinical studies, written in English, assessing the cost-effectiveness and/or efficacy of pharmacogenomic testing for MDD were included. Each publication was critically examined for relevant data. Two nonrandomized, open-label, 8-week, prospective studies reported overall greater improvement in depressive symptom severity in the group of MDD subjects receiving psychiatric care guided by results of combinatorial pharmacogenomic testing (GeneSight) when compared to the unguided group. One industry-sponsored, randomized, double-blind, 10-week prospective study reported a trend for improved outcomes for the GeneSight-guided group; however, the trend did not reach statistical significance. Another industry-sponsored, randomized, double-blind, 12-week prospective study reported a 2.5-fold increase in remission rates in the CNSDose-guided group (P < .0001). One naturalistic, unblinded, industry-sponsored study showed clinical improvement when pharmacogenomics testing guided prescribing; however, this study lacked a control group. A single cost-effectiveness study concluded that single gene testing was not cost-effective. Conversely, a separate study reported that combinatorial pharmacogenomic testing is cost-effective. A limited number of studies have shown promise for the clinical utility of pharmacogenomic testing; however, cost-effectiveness of pharmacogenomics, as well as demonstration of improved health outcomes, is not yet supported with replicated evidence. © Copyright 2017 Physicians Postgraduate Press, Inc.

High-Throughput In Vivo Genotoxicity Testing: An Automated Readout System for the Somatic Mutation and Recombination Test (SMART)

PubMed Central

Kwak, Jihoon; Genovesio, Auguste; Kang, Myungjoo; Hansen, Michael Adsett Edberg; Han, Sung-Jun

2015-01-01

Genotoxicity testing is an important component of toxicity assessment. As illustrated by the European registration, evaluation, authorization, and restriction of chemicals (REACH) directive, it concerns all the chemicals used in industry. The commonly used in vivo mammalian tests appear to be ill adapted to tackle the large compound sets involved, due to throughput, cost, and ethical issues. The somatic mutation and recombination test (SMART) represents a more scalable alternative, since it uses Drosophila, which develops faster and requires less infrastructure. Despite these advantages, the manual scoring of the hairs on Drosophila wings required for the SMART limits its usage. To overcome this limitation, we have developed an automated SMART readout. It consists of automated imaging, followed by an image analysis pipeline that measures individual wing genotoxicity scores. Finally, we have developed a wing score-based dose-dependency approach that can provide genotoxicity profiles. We have validated our method using 6 compounds, obtaining profiles almost identical to those obtained from manual measures, even for low-genotoxicity compounds such as urethane. The automated SMART, with its faster and more reliable readout, fulfills the need for a high-throughput in vivo test. The flexible imaging strategy we describe and the analysis tools we provide should facilitate the optimization and dissemination of our methods. PMID:25830368

Molecular engineering of industrial enzymes: recent advances and future prospects.

PubMed

Yang, Haiquan; Li, Jianghua; Shin, Hyun-Dong; Du, Guocheng; Liu, Long; Chen, Jian

2014-01-01

Many enzymes are efficiently produced by microbes. However, the use of natural enzymes as biocatalysts has limitations such as low catalytic efficiency, low activity, and low stability, especially under industrial conditions. Many protein engineering technologies have been developed to modify natural enzymes and eliminate these limitations. Commonly used protein engineering strategies include directed evolution, site-directed mutagenesis, truncation, and terminal fusion. This review summarizes recent advances in the molecular engineering of industrial enzymes and discusses future prospects in this field. We expect this review to increase interest in and advance the molecular engineering of industrial enzymes.

Physical properties of root cementum: Part I. A new method for 3-dimensional evaluation.

PubMed

Malek, S; Darendeliler, M A; Swain, M V

2001-08-01

Cementum is a nonuniform connective tissue that covers the roots of human teeth. Investigation of the physical properties of cementum may help in understanding or evaluating any possible connection to root resorption. A variety of engineering tests are available to investigate these properties. However, the thickness of the cementum layer varies, and this limits the applicability of these techniques in determining the physical properties of cementum. Hardness testing with Knoop and Vickers indentations overcame some of these limitations, but they prohibited the retrieval and retesting of the sample and therefore the testing was restricted to one area or section of the tooth. Another limiting factor with the existing techniques was the risk of artifacts related to the embedding material such as acrylic. A new method to investigate the physical properties of human premolar cementum was developed to obtain a 3-dimensional map of these properties with the Ultra Micro Indentation System (UMIS-2000; Commonwealth Scientific and Industrial Research Organization, Campbell, Australia). UMIS-2000 is a nano-indentation instrument for investigation of the properties of the near-surface region of materials. Premolars were harvested from orthodontic patients requiring extractions and then mounted on a newly designed surveyor that allowed sample retrieval and 3-dimensional rotation. This novel method enabled the quantitative testing of root surface cementum, on all 4 root surfaces, extending from the apex to the cementoenamel junction at 60 different sites.

Effects of financial crisis on the industry sector of Chinese stock market — from a perspective of complex network

NASA Astrophysics Data System (ADS)

Yang, Chunxia; Chen, Yanhua; Hao, Weiwei; Shen, Ying; Tang, Minxuan; Niu, Lei

2014-05-01

In this paper, we use mutual information to measure the statistical interdependence between 23 industry sectors of Shanghai stock market and construct corresponding correlation network to analyze the shock of 2008 financial crisis on industry sectors. The obtained meaningful facts are as follows. First, such crisis has only a limited impact on leading industries such as Manufacturing, Commercial trade and Machinery & Equipment, which still play an important role in Chinese economy. Second, the crisis badly attacks China's export industries like Electronics, Wood & Furniture and Textile & Clothing. The damage further hurts other industries, and then export industries' influence becomes larger. Third, the crisis adversely impacts the import industries like Petrochemical, Metal & Nonmetal and Pharmaceutical Biotechnology. While due to the stimulation of macroeconomic policies, the influence of crisis on import industries is limited. Similarly, due to relatively strict capital control and the macroeconomic policies stimulating the domestic demand, those industries like Construction, Real Estate and Financial Services are slightly wounded. All these findings suggest that Chinese government should transform from the external demand to the domestic consumption to sustain economic growth.

Enhancing Carbon Reactivity in Mercury Control in Lignite-Fired Systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chad Wocken; Michael Holmes; John Pavlish

2008-06-30

This project was awarded through the U.S. Department of Energy (DOE) National Energy Technology Laboratory Program Solicitation DE-PS26-03NT41718-01. The Energy & Environmental Research Center (EERC) led a consortium-based effort to resolve mercury (Hg) control issues facing the lignite industry. The EERC team-the Electric Power Research Institute (EPRI); the URS Corporation; the Babcock & Wilcox Company; ADA-ES; Apogee; Basin Electric Power Cooperative; Otter Tail Power Company; Great River Energy; Texas Utilities; Montana-Dakota Utilities Co.; Minnkota Power Cooperative, Inc.; BNI Coal Ltd.; Dakota Westmoreland Corporation; the North American Coal Corporation; SaskPower; and the North Dakota Industrial Commission-demonstrated technologies that substantially enhanced themore » effectiveness of carbon sorbents to remove Hg from western fuel combustion gases and achieve a high level ({ge} 55% Hg removal) of cost-effective control. The results of this effort are applicable to virtually all utilities burning lignite and subbituminous coals in the United States and Canada. The enhancement processes were previously proven in pilot-scale and limited full-scale tests. Additional optimization testing continues on these enhancements. These four units included three lignite-fired units: Leland Olds Station Unit 1 (LOS1) and Stanton Station Unit 10 (SS10) near Stanton and Antelope Valley Station Unit 1 (AVS1) near Beulah and a subbituminous Powder River Basin (PRB)-fired unit: Stanton Station Unit 1 (SS1). This project was one of three conducted by the consortium under the DOE mercury program to systematically test Hg control technologies available for utilities burning lignite. The overall objective of the three projects was to field-test and verify options that may be applied cost-effectively by the lignite industry to reduce Hg emissions. The EERC, URS, and other team members tested sorbent injection technologies for plants equipped with electrostatic precipitators (ESPs) and spray dryer absorbers combined with fabric filters (SDAs-FFs). The work focused on technology commercialization by involving industry and emphasizing the communication of results to vendors and utilities throughout the project.« less

Renewable energy and occupational health and safety research directions: a white paper from the Energy Summit, Denver Colorado, April 11-13, 2011.

PubMed

Mulloy, Karen B; Sumner, Steven A; Rose, Cecile; Conway, George A; Reynolds, Stephen J; Davidson, Margaret E; Heidel, Donna S; Layde, Peter M

2013-11-01

Renewable energy production may offer advantages to human health by way of less pollution and fewer climate-change associated ill-health effects. Limited data suggests that renewable energy will also offer benefits to workers in the form of reduced occupational injury, illness and deaths. However, studies of worker safety and health in the industry are limited. The Mountain and Plains Education and Research Center (MAP ERC) Energy Summit held in April 2011 explored issues concerning worker health and safety in the renewable energy industry. The limited information on hazards of working in the renewable energy industry emphasizes the need for further research. Two basic approaches to guiding both prevention and future research should include: (1) applying lessons learned from other fields of occupational safety and health, particularly the extractive energy industry; and (2) utilizing knowledge of occupational hazards of specific materials and processes used in the renewable energy industry. © 2013 Wiley Periodicals, Inc.

Terry Turbopump Expanded Operating Band Full-Scale Component and Basic Science Detailed Test Plan - Final.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Osborn, Douglas; Solom, Matthew

This document details the milestone approach to define the true operating limitations (margins) of the Terry turbopump systems used in the nuclear industry for Milestone 3 (full-scale component experiments) and Milestone 4 (Terry turbopump basic science experiments) efforts. The overall multinational-sponsored program creates the technical basis to: (1) reduce and defer additional utility costs, (2) simplify plant operations, and (3) provide a better understanding of the true margin which could reduce overall risk of operations.

Space Environment Stability and Physical Properties of New Materials for Space Power and Commercial Applications

NASA Technical Reports Server (NTRS)

Hambourger, Paul D.

1997-01-01

To test and evaluate suitability of materials for use in space power systems and related space and commercial applications, and to achieve sufficient understanding of the mechanisms by which, the materials perform in their intended applications. Materials and proposed applications included but were not limited to: Improved anodes for lithium ion batteries, highly-transparent arc-proof solar array coatings, and improved surface materials for solar dynamic concentrators and receivers. Cooperation and interchange of data with industrial companies as appropriate.

Terry Turbopump Expanded Operating Band Full-Scale Component and Basic Science Detailed Test Plan-Revision 2

DOE Office of Scientific and Technical Information (OSTI.GOV)

Solom, Matthew; Ross, Kyle; Cardoni, Jeffrey N.

This document details the milestone approach to define the true operating limitations (margins) of the Terry turbopump systems used in the nuclear industry for Milestone 3 (full-scale component experiments) and Milestone 4 (Terry turbopump basic science experiments) efforts. The overall multinational-sponsored program creates the technical basis to: (1) reduce and defer additional utility costs, (2) simplify plant operations, and (3) provide a better understanding of the true margin which could reduce overall risk of operations.

Assessment of Lithium-based Battery Electrolytes Developed under the NASA PERS Program

NASA Technical Reports Server (NTRS)

Bennett, William R.; Baldwin, Richard S.

2006-01-01

Recently, NASA formally completed the Polymer Energy Rechargeable System (PERS) Program, which was established in 2000 in collaboration with the Air Force Research Laboratory (AFRL) to support the development of polymer-based, lithium-based cell chemistries and battery technologies to address the next generation of aerospace applications and mission needs. The goal of this program was to ultimately develop an advanced, space-qualified battery technology, which embodied a solid polymer electrolyte (SPE) and complementary components, with improved performance characteristics that would address future aerospace battery requirements. Programmatically, the PERS initiative exploited both interagency collaborations to address common technology and engineering issues and the active participation of academia and private industry. The initial program phases focused on R&D activities to address the critical technical issues and challenges at the cell level. A variety of cell and polymeric electrolyte concepts were pursued as part of the development efforts undertaken at numerous governmental, industrial and academic laboratories. Numerous candidate electrolyte materials were developed, synthesized and optimized for evaluation. Utilizing the component screening facility and the "standardized" test procedures developed at the NASA Glenn Research Center, electrochemical screening and performance evaluations of promising candidate materials were completed. This overview summarizes test results for a variety of candidate electrolyte materials that were developed under the PERS Program. Electrolyte properties are contrasted and compared to the original project goals, and the strengths and weaknesses of the electrolyte chemistries are discussed. Limited cycling data for full-cells using lithium metal and vanadium oxide electrodes are also presented. Based on measured electrolyte properties, the projected performance characteristics and temperature limitations of batteries utilizing the advanced electrolytes and components have been estimated. Limitations for the achievement of practical performance levels are also discussed, as well as needs for future research and development.

Commercial development of microalgal biotechnology: from the test tube to the marketplace.

PubMed

Olaizola, Miguel

2003-07-01

While humans have taken limited advantage of natural populations of microalgae for centuries (Nostoc in Asia and Spirulina in Africa and North America for sustenance), it is only recently that we have come to realize the potential of microalgal biotechnology. Microalgal biotechnology has the potential to produce a vast array of products including foodstuffs, industrial chemicals, compounds with therapeutic applications and bioremediation solutions from a virtually untapped source. From an industrial (i.e. commercial) perspective, the goal of microalgal biotechnology is to make money by developing marketable products. For such a business to succeed the following steps must be taken: identify a desirable metabolite and a microalga that produces and accumulates the desired metabolite, establish a large-scale production process for the desired metabolite, and market the desired metabolite. So far, the commercial achievements of microalgal biotechnology have been modest. Microalgae that produce dozens of desirable metabolites have been identified. Aided by high throughput screening technology even more leads will become available. However, the successes in large-scale production and product marketing have been few. We will discuss those achievements and difficulties from the industrial point of view by considering examples from industry, specially our own experience at Mera Pharmaceuticals.

Composite electrodes for advanced electrochemical applications. Quarterly report for the period October 1, - December 31, 1999

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kovach, Chris

The electrochemical industry is one of the most highly energy intensive industries today. However, there have been no significant advances in the electrodes that these industries use. The dimensionally stable anode (DSA), which ELTECH introduced under a license agreement, has been the industry standard for the past twenty-five years. But, DSAs are nearing the end of their technological prevalence. The principal problems with DSAs include high capital and operating costs, and the proprietary nature of the technology. In addition, DSAs experience problems that include: contamination of the process solution by anode materials, failure when the electrocatalytic coating peels from underattack,more » generally low anode performance due to inherent limitations in operating current density, and short anode lifetime because of corrosion. The proposed innovation combines the low electrical resistance of copper with the corrosion resistance of electrically conductive diamond to achieve energy efficient, long-lifetime electrodes for electrochemistry. The proposed work will ultimately develop a composite electrode that consists of a copper substrate, a conductive diamond coating, and a catalytic precious metal coating. The scope of the current work includes preparation, testing, and evaluation of diamond-coated titanium electrodes.« less

Composite electrodes for advanced electrochemical applications. Quarterly report for the period July 1 - September 30, 1999

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kovach, Chris

The electrochemical industry is one of the most highly energy-intensive industries today. However, there have been no significant advances in the electrodes that these industries use. The dimensionally stable anode (DSA), which ELTECH introduced under a license agreement, has been the industry standard for the past twenty-five years. But, DSAs are nearing the end of their technological prevalence. The principal problems with DSAs include high capital and operating cost, and the proprietary nature of the technology. In addition, DSAs experience problems that include contamination of the process solution by anode materials, failure when the electrocatalytic coating peels from under attack,more » generally low anode performance due to inherent limitations in operating current density, and short anode lifetime because of corrosion. The proposed innovation combines the low electrical resistance of copper with the corrosion resistance of electrically conductive diamond to achieve energy-efficient, long-lifetime electrodes for electrochemistry. The proposed work will ultimately develop a composite electrode that consists of a copper substrate, a conductive diamond coating, and a catalytic precious metal coating. The scope of the current work includes preparation, testing, and evaluation of diamond-coated titanium electrodes.« less

Setting Win Limits: An Alternative Approach to "Responsible Gambling"?

PubMed

Walker, Douglas M; Litvin, Stephen W; Sobel, Russell S; St-Pierre, Renée A

2015-09-01

Social scientists, governments, and the casino industry have all emphasized the need for casino patrons to "gamble responsibly." Strategies for responsible gambling include self-imposed time limits and loss limits on gambling. Such strategies help prevent people from losing more than they can afford and may help prevent excessive gambling behavior. Yet, loss limits also make it more likely that casino patrons leave when they are losing. Oddly, the literature makes no mention of "win limits" as a potential approach to responsible gambling. A win limit would be similar to a loss limit, except the gambler would leave the casino upon reaching a pre-set level of winnings. We anticipate that a self-imposed win limit will reduce the gambler's average loss and, by default, also reduce the casino's profit. We test the effect of a self-imposed win limit by running slot machine simulations in which the treatment group of players has self-imposed and self-enforced win and loss limits, while the control group has a self-imposed loss limit or no limit. We find that the results conform to our expectations: the win limit results in improved player performance and reduced casino profits. Additional research is needed, however, to determine whether win limits could be a useful component of a responsible gambling strategy.

76 FR 30650 - Aluminum Extrusions from the People's Republic of China: Antidumping Duty Order

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-26

... order, published concurrently with this notice. \\3\\ Guang Ya Aluminium Industries Co., Ltd., Foshan Guangcheng Aluminium Co., Ltd., Kong Ah International Company Limited, and Guang Ya Aluminium Industries...., Zhongya Shaped Aluminium (HK) Holding Limited and Karlton Aluminum Company Ltd. (collectively ``New...

76 FR 40136 - Semiannual Regulatory Agenda

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-07

... Industries. 309 Small Business Size 3245-AG28 Standards: Real Estate, Rental and Leasing Industries. 310... Opportunity Act. This Act provides that any time limitation on any qualification, certification, or period of... guidance on tolling of time limitations for veteran-owned small businesses. Timetable: Action Date FR Cite...

Evaluation program for secondary spacecraft cells. Initial evaluation tests of Eagle-Picher Industries, Incorporated 3.0 ampere-hour nickel-cadmium spacecraft cells

NASA Technical Reports Server (NTRS)

Harkness, J. D.

1973-01-01

The capacity of the cells ranged from 3.58 to 3.97 amperehours during the three capacity tests. Three cells were removed from test, due to high pressure, during the C/10, 24-hour charge at room ambient temperature. The voltage requirement of 1.480 volts was exceeded by the cells during the C/10, 24-hour charge at 20 C, although the end-of-charge voltage was below this value (1.466-1.475 volts). Average capacity out during the 20 C charge efficiency test was 0.84 AH which represents 48% and is below the minimum requirement of 55%. The cells exhibited no pressure decay during the open-circuit stand portion of the pressure versus capacity test, as all cells reached their voltage limit (1.550 volts) before their pressure reached 20 psia with the highest pressure being 8 psia during charge.

Need for new technologies for detection of adventitious agents in vaccines and other biological products.

PubMed

Mallet, Laurent; Gisonni-Lex, Lucy

2014-01-01

From an industrial perspective, the conventional in vitro and in vivo assays used for detection of viral contaminants have shown their limitations, as illustrated by the unfortunate detection of porcine circovirus contamination in a licensed rotavirus vaccine. This contamination event illustrates the gaps within the existing adventitious agent strategy and the potential use of new broader molecular detection methods. This paper serves to summarize current testing approaches and challenges, along with opportunities for the use of these new technologies. Testing of biological products is required to ensure the safety of patients. Recently, a licensed vaccine was found to be contaminated with a virus. This contamination did not cause a safety concern to the patients; however, it highlights the need for using new testing methods to control our biological products. This paper introduces the benefits of these new tests and outlines the challenges with the current tests. © PDA, Inc. 2014.

Combined spectrophotometry and tensile measurements of human connective tissues: potentials and limitations.

PubMed

Ernstberger, Markus; Sichting, Freddy; Baselt, Tobias; Hartmann, Peter; Aust, Gabriela; Hammer, Niels

2013-06-01

Strain-dependent transmission data of nine iliotibial tract specimens are determined using a custom-built optical setup with a halogen light source and an industrial norm material testing machine. Polarized light microscopy and hematoxylin-eosin staining indicated that lateral contraction of collagen structures is responsible for total intensity variations during a 20-cycle preconditioning and a 5-cycle tensile test. Tensile force progress is opposite to total transmission progress. Due to dehydration, wavelength-specific radiation intensity shifting is determined during the test, primarily noticeable in a water absorption band between 1400 and 1500 nm. The results show the capability of integrating spectrophotometry technology into biomechanics for determining structural alterations of human collagen due to applied strain. Being more sensitive to drying, spectrophotometry may likely serve as a quality control in stress-strain testing of biological structures.

Computer Simulation of Microwave Devices

NASA Technical Reports Server (NTRS)

Kory, Carol L.

1997-01-01

The accurate simulation of cold-test results including dispersion, on-axis beam interaction impedance, and attenuation of a helix traveling-wave tube (TWT) slow-wave circuit using the three-dimensional code MAFIA (Maxwell's Equations Solved by the Finite Integration Algorithm) was demonstrated for the first time. Obtaining these results is a critical step in the design of TWT's. A well-established procedure to acquire these parameters is to actually build and test a model or a scale model of the circuit. However, this procedure is time-consuming and expensive, and it limits freedom to examine new variations to the basic circuit. These limitations make the need for computational methods crucial since they can lower costs, reduce tube development time, and lessen limitations on novel designs. Computer simulation has been used to accurately obtain cold-test parameters for several slow-wave circuits. Although the helix slow-wave circuit remains the mainstay of the TWT industry because of its exceptionally wide bandwidth, until recently it has been impossible to accurately analyze a helical TWT using its exact dimensions because of the complexity of its geometrical structure. A new computer modeling technique developed at the NASA Lewis Research Center overcomes these difficulties. The MAFIA three-dimensional mesh for a C-band helix slow-wave circuit is shown.

SQL-RAMS

NASA Technical Reports Server (NTRS)

Alfaro, Victor O.; Casey, Nancy J.

2005-01-01

SQL-RAMS (where "SQL" signifies Structured Query Language and "RAMS" signifies Rocketdyne Automated Management System) is a successor to the legacy version of RAMS -- a computer program used to manage all work, nonconformance, corrective action, and configuration management on rocket engines and ground support equipment at Stennis Space Center. The legacy version resided in the File-Maker Pro software system and was constructed in modules that could act as standalone programs. There was little or no integration among modules. Because of limitations on file-management capabilities in FileMaker Pro, and because of difficulty of integration of FileMaker Pro with other software systems for exchange of data using such industry standards as SQL, the legacy version of RAMS proved to be limited, and working to circumvent its limitations too time-consuming. In contrast, SQL-RAMS is an integrated SQL-server-based program that supports all data-exchange software industry standards. Whereas in the legacy version, it was necessary to access individual modules to gain insight into a particular workstatus document, SQL-RAMS provides access through a single-screen presentation of core modules. In addition, SQL-RAMS enables rapid and efficient filtering of displayed statuses by predefined categories and test numbers. SQL-RAMS is rich in functionality and encompasses significant improvements over the legacy system. It provides users the ability to perform many tasks, which in the past required administrator intervention. Additionally, many of the design limitations have been corrected, allowing for a robust application that is user centric.

SQL-RAMS

NASA Technical Reports Server (NTRS)

Alfaro, Victor O.; Casey, Nancy J.

2005-01-01

SQL-RAMS (where "SQL" signifies Structured Query Language and "RAMS" signifies Rocketdyne Automated Management System) is a successor to the legacy version of RAMS a computer program used to manage all work, nonconformance, corrective action, and configuration management on rocket engines and ground support equipment at Stennis Space Center. The legacy version resided in the FileMaker Pro software system and was constructed in modules that could act as stand-alone programs. There was little or no integration among modules. Because of limitations on file-management capabilities in FileMaker Pro, and because of difficulty of integration of FileMaker Pro with other software systems for exchange of data using such industry standards as SQL, the legacy version of RAMS proved to be limited, and working to circumvent its limitations too time-consuming. In contrast, SQL-RAMS is an integrated SQL-server-based program that supports all data-exchange software industry standards. Whereas in the legacy version, it was necessary to access individual modules to gain insight to a particular work-status documents, SQL-RAMS provides access through a single-screen presentation of core modules. In addition, SQL-RAMS enable rapid and efficient filtering of displayed statuses by predefined categories and test numbers. SQL-RAMS is rich in functionality and encompasses significant improvements over the legacy system. It provides users the ability to perform many tasks which in the past required administrator intervention. Additionally many of the design limitations have been corrected allowing for a robust application that is user centric.

Development of Test Protocols for International Space Station Particulate Filters

NASA Technical Reports Server (NTRS)

Green, Robert D.; Vijayakumar, R.; Agui, Juan H.

2014-01-01

Air quality control on the International Space Station (ISS) is a vital requirement for maintaining a clean environment for the crew and the hardware. This becomes a serious challenge in pressurized space compartments since no outside air ventilation is possible, and a larger particulate load is imposed on the filtration system due to lack of gravitational settling. The ISS Environmental Control and Life Support System (ECLSS) uses a filtration system that has been in use for over 14 years and has proven to meet this challenge. The heart of this system is a traditional High- Efficiency Particulate Air (HEPA) filter configured to interface with the rest of the life support elements and provide effective cabin filtration. Over the years, the service life of these filters has been re-evaluated based on limited post-flight tests of returned filters and risk factors. On earth, a well designed and installed HEPA filter will last for several years, e.g. in industrial and research clean room applications. Test methods for evaluating these filters are being developed on the basis of established test protocols used by the industry and the military. This paper will discuss the test methods adopted and test results on prototypes of the ISS filters. The results will assist in establishing whether the service life can be extended for these filters. Results from unused filters that have been in storage will also be presented to ascertain the shelf life and performance deterioration, if any and determine if the shelf life may be extended.

[Quality assurance from the viewpoint of the x-ray film industry].

PubMed

von Volkmann, T

1992-08-01

The parameters of a film-screen-combination are listed in the directive to section 16 of the german X-ray Regulation. These parameters are determined by methods described in DIN standards and published by the manufacturer. Comparable but less precise parameters are determined in the Acceptance Test. For physical reasons it is not possible to determine the speed of an X-ray film or the intensification factor of a screen separately. The films, screens and processing chemicals delivered by the members of the manufacturer association ZVEI are kept below a deviation (expressed as relative contribution to the system speed S) of +/- 10% for the majority of products, the upper limit is +/- 15%. Poor storage and transport conditions may adversely affect the quality of X-ray films. A special labeling of the film box shall serve to guarantee safe distribution channels. The processing conditions are adjusted at the Acceptance Test according to the manufacturers recommendations. The Constancy Test of film processing serves to maintain these correct conditions. Methods deviating from the DIN-method are of limited (Bayerische method) or no value (Stuttgart method).

Testing low cost OEM CO2 sensors for outdoor ecological studies

NASA Astrophysics Data System (ADS)

Macintyre, C. M.; Risk, D. A.

2011-12-01

IR (Infrared) gas sensors are used extensively in CO2 research but price and power requirement often limits low-cost distributed sensing. In the past three years, sensors have been introduced to the industrial market at prices as low as $100 US for air-handling and automotive application. These inexpensive sensors are small in size, and have low power demand making them potentially ideal for low-cost distributed deployments. However, the sensors are only tested and calibrated for indoor use and for industrial standards and may not show their true potential for outdoor ecological studies. This poster summarizes the results of a sensor inter-comparison test, to document functionality, response time, electrical noise, precision, and accuracy, under varying moistures and temperatures broadly representative of a wide range of outdoor settings. The three selected sensors were placed in a closed loop system with a valving system using a LiCor Li-7000 as reference, controlled by a CR1000 datalogger that controlled CO2 and moisture concentrations content within the cell on the basis of LiCor readings. To achieve different temperatures, the tests were repeated at room temperature, inside a freezer (-18°C) and incubator (40°C). The tests involved repeatedly stepping the sensors from 2000 ppm CO2 to 400 ppm CO2 in 200 ppm or 400 ppm increments, at various moisture contents, and under the various temperature regimes. Vaisala 222 and 343 sensors were also part of the test group as comparators, as both are used widely in ecological research. The OEM sensors displayed good linearity, fast response time, and results comparable to Vaisala probes. In most cases the sensors performed beyond our expectations with notably less electrical noise than the Vaisala sensors and excellent power thriftiness. Some sensors showed better response to extreme moisture and temperature conditions. Provided that suitable protective embodiments were built around them, and that they are deployed in an environment suiting their tolerance limits, most of the tested sensors would be suitable as low-cost alternatives to sensors currently being sold for outdoor ecological studies.

Energy Implications of Materials Processing

ERIC Educational Resources Information Center

Hayes, Earl T.

1976-01-01

Processing of materials could become energy-limited rather than resource-limited. Methods to extract metals, industrial minerals, and energy materials and convert them to useful states requires more than one-fifth of the United States energy budget. Energy accounting by industries must include a total systems analysis of costs to insure net energy…

Industry-Based Bilingual Vocational Training. A Directory of Industry-Based Training Programs for LEP Adults.

ERIC Educational Resources Information Center

Thomas, Robert J.; Rhodes, Paula

The purposes of this directory of existing industry-based training programs--for limited English-proficient (LEP) adults employed in those industries--are as follows: (1) to provide a sense of the types of existing industry-based programs available to LEP employees; (2) to identify programs with the potential of implementing bilingual vocational…

31 CFR 538.210 - Prohibited transactions relating to petroleum and petrochemical industries.

Code of Federal Regulations, 2014 CFR

2014-07-01

... petroleum and petrochemical industries. 538.210 Section 538.210 Money and Finance: Treasury Regulations... petrochemical industries. (a) Except as otherwise authorized, and notwithstanding any contract entered into or... relating to the petroleum or petrochemical industries in Sudan, including, but not limited to, oilfield...

31 CFR 538.210 - Prohibited transactions relating to petroleum and petrochemical industries.

Code of Federal Regulations, 2012 CFR

2012-07-01

... petroleum and petrochemical industries. 538.210 Section 538.210 Money and Finance: Treasury Regulations... petrochemical industries. (a) Except as otherwise authorized, and notwithstanding any contract entered into or... relating to the petroleum or petrochemical industries in Sudan, including, but not limited to, oilfield...

31 CFR 538.210 - Prohibited transactions relating to petroleum and petrochemical industries.

Code of Federal Regulations, 2013 CFR

2013-07-01

... petroleum and petrochemical industries. 538.210 Section 538.210 Money and Finance: Treasury Regulations... petrochemical industries. (a) Except as otherwise authorized, and notwithstanding any contract entered into or... relating to the petroleum or petrochemical industries in Sudan, including, but not limited to, oilfield...

Structural Behavior of Concrete Beams Reinforced with Basalt Fiber Reinforced Polymer (BFRP) Bars

NASA Astrophysics Data System (ADS)

Ovitigala, Thilan

The main challenge for civil engineers is to provide sustainable, environmentally friendly and financially feasible structures to the society. Finding new materials such as fiber reinforced polymer (FRP) material that can fulfill the above requirements is a must. FRP material was expensive and it was limited to niche markets such as space shuttles and air industry in the 1960s. Over the time, it became cheaper and spread to other industries such as sporting goods in the 1980-1990, and then towards the infrastructure industry. Design and construction guidelines are available for carbon fiber reinforced polymer (CFRP), aramid fiber reinforced polymer (AFRP) and glass fiber reinforced polymer (GFRP) and they are currently used in structural applications. Since FRP is linear elastic brittle material, design guidelines for the steel reinforcement are not valid for FRP materials. Corrosion of steel reinforcement affects the durability of the concrete structures. FRP reinforcement is identified as an alternative to steel reinforcement in corrosive environments. Although basalt fiber reinforced polymer (BFRP) has many advantages over other FRP materials, but limited studies have been done. These studies didn't include larger BFRP bar diameters that are mostly used in practice. Therefore, larger beam sizes with larger BFRP reinforcement bar diameters are needed to investigate the flexural and shear behavior of BFRP reinforced concrete beams. Also, shear behavior of BFRP reinforced concrete beams was not yet studied. Experimental testing of mechanical properties and bond strength of BFRP bars and flexural and shear behavior of BFRP reinforced concrete beams are needed to include BFRP reinforcement bars in the design codes. This study mainly focuses on the use of BFRP bars as internal reinforcement. The test results of the mechanical properties of BFRP reinforcement bars, the bond strength of BFRP reinforcement bars, and the flexural and shear behavior of concrete beams reinforced with BFRP reinforcement bars are presented and verified with other research studies, existing design codes and guidelines provided for other FRP bars. Based on the experimental testing results, analytical equations were developed and existing equations were modified to predict the actual structural behavior of FRP bar reinforced concrete beams with reasonable accuracy.

High Chlamydia and gonorrhea incidence and reinfection among performers in the adult film industry.

PubMed

Goldstein, Binh Y; Steinberg, Jane K; Aynalem, Getahun; Kerndt, Peter R

2011-07-01

Adult film industry (AFI) performers engage in unprotected oral, vaginal, and anal sex with multiple partners, increasing the likelihood of acquisition and transmission of human immunodeficiency virus and other sexually transmitted diseases. Current industry practice does not require condom use; instead it relies upon limited testing. We sought to estimate the annual cumulative incidence of chlamydia (CT) and gonorrhea (GC) and assess the rate of reinfection among AFI performers. We retrieved all CT and GC cases diagnosed among performers between 2004 and 2008 in Los Angeles, CA and reported to the health department surveillance registry. Using 2008 data, we estimated ranges for CT and GC annual cumulative incidences based on assumptions of the population size of performers. For cases reported between 2004 and 2007, we determined the CT and/or GC reinfection rate within 1 year. Lower bounds for the annual cumulative incidences of CT and GC among AFI performers were estimated to be 14.3% and 5.1%, respectively. The reinfection rate within 1 year was 26.1%. Female performers were 27% more likely to be reinfected as compared with male performers (prevalence ratio, 1.27; 95% confidence interval, 1.09-1.48). CT and GC infections are common and recurrent among performers. Control strategies, including promotion of condom use, are needed to protect workers in this industry, as testing alone will not effectively prevent workplace acquisition and transmission. Additional legislation that places more responsibility on the production companies is needed to ensure the safety and health of performers.

76 FR 9028 - Guidance for Industry: Potency Tests for Cellular and Gene Therapy Products; Availability

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-16

...] Guidance for Industry: Potency Tests for Cellular and Gene Therapy Products; Availability AGENCY: Food and... the availability of a document entitled ``Guidance for Industry: Potency Tests for Cellular and Gene Therapy Products'' dated January 2011. The guidance document provides manufacturers of cellular and gene...

Multidisciplinary propulsion simulation using the numerical propulsion system simulator (NPSS)

NASA Technical Reports Server (NTRS)

Claus, Russel W.

1994-01-01

Implementing new technology in aerospace propulsion systems is becoming prohibitively expensive. One of the major contributions to the high cost is the need to perform many large scale system tests. The traditional design analysis procedure decomposes the engine into isolated components and focuses attention on each single physical discipline (e.g., fluid for structural dynamics). Consequently, the interactions that naturally occur between components and disciplines can be masked by the limited interactions that occur between individuals or teams doing the design and must be uncovered during expensive engine testing. This overview will discuss a cooperative effort of NASA, industry, and universities to integrate disciplines, components, and high performance computing into a Numerical propulsion System Simulator (NPSS).

Toxic Element Contamination of Natural Health Products and Pharmaceutical Preparations

PubMed Central

Genuis, Stephen J.; Schwalfenberg, Gerry; Siy, Anna-Kristen J.; Rodushkin, Ilya

2012-01-01

Background Concern has recently emerged regarding the safety of natural health products (NHPs)–therapies that are increasingly recommended by various health providers, including conventional physicians. Recognizing that most individuals in the Western world now consume vitamins and many take herbal agents, this study endeavored to determine levels of toxic element contamination within a range of NHPs. Methods Toxic element testing was performed on 121 NHPs (including Ayurvedic, traditional Chinese, and various marine-source products) as well as 49 routinely prescribed pharmaceutical preparations. Testing was also performed on several batches of one prenatal supplement, with multiple samples tested within each batch. Results were compared to existing toxicant regulatory limits. Results Toxic element contamination was found in many supplements and pharmaceuticals; levels exceeding established limits were only found in a small percentage of the NHPs tested and none of the drugs tested. Some NHPs demonstrated contamination levels above preferred daily endpoints for mercury, cadmium, lead, arsenic or aluminum. NHPs manufactured in China generally had higher levels of mercury and aluminum. Conclusions Exposure to toxic elements is occurring regularly as a result of some contaminated NHPs. Best practices for quality control–developed and implemented by the NHP industry with government oversight–is recommended to guard the safety of unsuspecting consumers. PMID:23185404

Evaluation of thermal cameras in quality systems according to ISO 9000 or EN 45000 standards

NASA Astrophysics Data System (ADS)

Chrzanowski, Krzysztof

2001-03-01

According to the international standards ISO 9001-9004 and EN 45001-45003 the industrial plants and the accreditation laboratories that implemented the quality systems according to these standards are required to evaluate an uncertainty of measurements. Manufacturers of thermal cameras do not offer any data that could enable estimation of measurement uncertainty of these imagers. Difficulties in determining the measurement uncertainty is an important limitation of thermal cameras for applications in the industrial plants and the cooperating accreditation laboratories that have implemented these quality systems. A set of parameters for characterization of commercial thermal cameras, a measuring set, some results of testing of these cameras, a mathematical model of uncertainty, and a software that enables quick calculation of uncertainty of temperature measurements with thermal cameras are presented in this paper.

An analysis of the effect of STEM initiatives on socially responsible diversity management in the US aerospace and defense industry

NASA Astrophysics Data System (ADS)

Johnson-Oliver, Patrick

Workforce diversity is a growing concern at a global level and enlightened economic self-interest and corporate image compels industries to leverage it as a competitive advantage. The US aerospace and defense industry (US ADI) addresses workforce diversity through socially responsible diversity management. Prior research into the topic of approaching workforce diversity as a business rationale and a moral imperative has been limited. Scharmer and Kaufer's (2013) Theory U guided this longitudinal explanatory quantitative study, leading from the future as it emerged relative to socially responsible diversity management to compel industry to remove blind spots and co-create an economy that benefits all by promoting workforce diversity as a dual agenda. This study filled a research gap investigating the business case for diversity as a dual agenda in aerospace industry science, technology, engineering, and mathematics (STEM) disciplines. The study also investigated the America COMPETES Act as a moderator of the relationship between historically black colleges and universities (HBCUs) and industry. Data was retrieved for secondary data analysis from the National Science Foundation (NSF) and other public government services and agency websites. Two hypotheses were tested using quantitative analysis including descriptive statistics, linear regression, ANOVA, and two factor analysis. The statistical results were analyzed and deductive logic employed to develop conclusions for the study. There was a significant relationship found between both predictors and socially responsible diversity management. The results reinforce the necessity for the aerospace defense industry to promote the dual agenda of the business case for diversity as complementary; not as competing mandates.

Where Does Creativity Fit into a Productivist Industrial Model of Knowledge Production?

ERIC Educational Resources Information Center

Ghassib, Hisham B.

2010-01-01

The basic premise of this paper is the fact that science has become a major industry: the knowledge industry. The paper throws some light on the reasons for the transformation of science from a limited, constrained and marginal craft into a major industry. It, then, presents a productivist industrial model of knowledge production, which shows its…

A users evaluation of SAMIS. [Solar Array Manufacturing Industry Simulation

NASA Technical Reports Server (NTRS)

Grenon, L. A.; Coleman, M. G.

1981-01-01

SAMIS, the Solar Array Manufacturing Industry Simulation computer program was developed by Jet Propulsion Laboratories (JPL) to provide a method whereby manufacturers or potential manufacturers of photovoltaics could simulate a solar industry using their own particular approach. This paper analyzes the usefulness of SAMIS to a growing photovoltaic industry and clearly illustrates its limitations as viewed by an industrial user.

The role of stakeholders in developing an international regulatory framework for carbon capture and storage

NASA Astrophysics Data System (ADS)

Augustin, C. M.; Broad, K.; Swart, P. K.

2011-12-01

It is estimated that carbon capture and storage (CCS) could be used to achieve between 15% and 55% of the carbon emission reductions necessary to avoid dangerous levels of climate change. It is also believed that achieving emission reduction goals will be less costly with CCS than without it. The expansion of active CCS sites over the past decade, from three to 53 demonstrates the value that industry sees in CCS as a transition technology for governments seeking to reduce their CO2 emissions. However, to continue developing CCS for industry scale implementation, it is essential to provide the regulatory certainty needed to foster energy industry wide adoption of CCS. Existing CCS regulatory regimes are inadequate, fragmented and contradictory. There is a need for comprehensive, unifying regulations for CCS that are flexible enough to adapt as the technology develops. Governments are limited by the fact that carbon capture and storage is a multidisciplinary issue that touches on the fields of oil drilling, groundwater quality, greenhouse gas management, air quality, and risk management. Though it is in part a technological, environmental and management issue there is also a complex political element to tackling the CCS problem. Due to its cross-cutting nature, CCS regulations should be based off the best practices and standards developed by industry stakeholders. Industry standards are stakeholder developed and consensus based, created through a democratic and collaborative process by bodies such as the International Standards Organization, the National Institutes of Standards and Testing (USA), ASTM International, and the Canadian Standards Organization. Standards can typically be broken down into six general categories: test methods, specifications, classifications, practices, guides, and terminology. These standards are created by stakeholders across the industry and across geographic boundaries to create an trade-wide, rather than nationwide, consensus and ensuring that the standards are international in scope. This paper examines regulatory issues post-capture, particularly the transport and geological storage of carbon dioxide and seeks to identify areas where relevant stakeholders should collaborate to develop a comprehensive list of industry standards and provides several case study examples.

77 FR 65858 - Initiation of Antidumping and Countervailing Duty Administrative Reviews and Request for...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-31

... Logistics Private Limited Almore Industries American Scholar, Inc. and/or I-Scholar AR Printing & Packaging.... Agility Logistics Private Limited Almore Industries American Scholar, Inc. and/or I-Scholar AR Printing... FAG Italia v. United States, 291 F.3d 806 (Fed Cir. 2002), as appropriate, whether antidumping duties...

75 FR 28567 - New Pneumatic Off-the-Road Tires From the People's Republic of China: Notice of Partial...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-21

... Limited, Laizhou Xiongying Rubber Industry Co., Ltd., Qingdao Free Trade Zone Full World International Trading Co., Ltd., Qingdao Taifa Group Co., Ltd., and Weihai Zhongwei Rubber Co., Ltd. The Department then... Resources Limited, Laizhou Xiongying Rubber Industry Co., Ltd., Qingdao Free Trade Zone Full World...

40 CFR 403.12 - Reporting requirements for POTW's and industrial users.

Code of Federal Regulations, 2011 CFR

2011-07-01

... final administrative decision made upon a category determination submission under § 403.6(a)(4... limit has been calculated in accordance with § 403.6(e) this adjusted limit along with supporting data... levels from intake water and without any increase in the pollutant due to activities of the Industrial...

40 CFR 403.12 - Reporting requirements for POTW's and industrial users.

Code of Federal Regulations, 2010 CFR

2010-07-01

... final administrative decision made upon a category determination submission under § 403.6(a)(4... limit has been calculated in accordance with § 403.6(e) this adjusted limit along with supporting data... levels from intake water and without any increase in the pollutant due to activities of the Industrial...

75 FR 73041 - Aluminum Extrusions From the People's Republic of China: Postponement of Final Determination of...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-29

... months. On November 1, 2010, Guang Ya Aluminium Industries Co., Ltd., Foshan Guangcheng Aluminium Co., Ltd., Kong Ah International Company Limited, and Guang Ya Aluminium Industries (Hong Kong) Limited..., finding that Guang Ya Group, Zhaoqing New Zhongya Aluminum Co., Ltd., Zhongya Shaped Aluminium (HK...

76 FR 18212 - FPL Energy Maine Hydro LLC; Madison Paper Industries; Merimil Limited Partnership; Notice of...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-01

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Project No. 2615-037] FPL Energy Maine Hydro LLC; Madison Paper Industries; Merimil Limited Partnership; Notice of Availability of Draft... paper-filed. To paper-file, mail an original and seven copies to: Kimberly D. Bose, Secretary, Federal...

Characterization of Tensile Properties, Limiting Strains, and Deep Drawing Behavior of AA5754-H22 Sheet at Elevated Temperature

NASA Astrophysics Data System (ADS)

Panicker, Sudhy S.; Singh, Har Govind; Panda, Sushanta Kumar; Dashwood, Richard

2015-11-01

Automotive industries are very much interested in characterization of formability improvement of aluminum alloys at elevated temperatures before designing tools, heating systems, and processing sequences for fabrication of auto-body panels by warm forming technology. In this study, tensile tests of AA5754-H22 aluminum alloy were carried out at five different temperatures and three different strain rates to investigate the deformation behavior correlating with Cowper-Symonds constitutive equation. Laboratory scale warm forming facilities were designed and fabricated to perform limiting dome height and deep drawing tests to evaluate forming limit strains and drawability of sheet metal at different tool temperatures. The forming limit strain and dome height improved significantly when both the die and punch were heated to 200 °C. Remarkable improvement in deep drawn cup depth was observed when die and punch temperatures were maintained at 200 and 30 °C, respectively, producing a non-isothermal temperature gradient of approximately 93 °C across the blank from flange to center. The forming behavior at different isothermal and non-isothermal conditions were predicted successfully using a thermo-mechanical FE model incorporating temperature-dependent properties in Barlat-89 yield criterion coupled with Cowper-Symonds hardening model, and the thinning/failure location in deformed cups were validated implementing the experimental limiting strains as damage model.

Concept of REACH and impact on evaluation of chemicals.

PubMed

Foth, H; Hayes, Aw

2008-01-01

Industrial chemicals have been in use for many decades and new products are regularly invented and introduced to the market. Also for decades, many different chemical laws have been introduced to regulate safe handling of chemicals in different use patterns. The patchwork of current regulation in the European Union is to be replaced by the new regulation on industrial chemical control, REACH. REACH stands for registration, evaluation, and authorization of chemicals. REACH entered force on June 1, 2007. REACH aims to overcome limitations in testing requirements of former regulation on industrial chemicals to enhance competitiveness and innovation with regard to manufacture safer substances and to promote the development of alternative testing methods. A main task of REACH is to address data gaps regarding the properties and uses of industrial chemicals. Producers, importers, and downstream users will have to compile and communicate standard information for all chemicals. Information sets to be prepared include safety data sheets (SDS), chemical safety reports (CSR), and chemical safety assessments (CSA). These are designed to guarantee adequate handling in the production chain, in transport and in use and to prevent the substances from being released to and distributed within the environment. Another important aim is to identify the most harmful chemicals and to set incentives to substitute them with safer alternatives. On one hand, REACH will have substantial impact on the basic understanding of the evaluation of chemicals. However, the toxicological sciences can also substantially influence the workability of REACH that supports the transformation of data to the information required to understand and manage acceptable and non acceptable risks in the use of industrial chemicals. The REACH regulation has been laid down in the main document and 17 Annexes of more than 849 pages. Even bigger technical guidance documents will follow and will inform about the rules for application and work out of dossiers. The following article gives a comprehensive overview on the concept of REACH to give deeper insight into this document. Members of the scientific community will have to define their own position as researchers, teachers, and experts to support the efforts to protect human health and the environment. The concept of REACH as well as new approaches to adapt standard testing regimes to foster a risk oriented approach in required work load to decrease animal based tests and to strengthen weight of evidence are explained in detail in this article.

Formability prediction for AHSS materials using damage models

NASA Astrophysics Data System (ADS)

Amaral, R.; Santos, Abel D.; José, César de Sá; Miranda, Sara

2017-05-01

Advanced high strength steels (AHSS) are seeing an increased use, mostly due to lightweight design in automobile industry and strict regulations on safety and greenhouse gases emissions. However, the use of these materials, characterized by a high strength to weight ratio, stiffness and high work hardening at early stages of plastic deformation, have imposed many challenges in sheet metal industry, mainly their low formability and different behaviour, when compared to traditional steels, which may represent a defying task, both to obtain a successful component and also when using numerical simulation to predict material behaviour and its fracture limits. Although numerical prediction of critical strains in sheet metal forming processes is still very often based on the classic forming limit diagrams, alternative approaches can use damage models, which are based on stress states to predict failure during the forming process and they can be classified as empirical, physics based and phenomenological models. In the present paper a comparative analysis of different ductile damage models is carried out, in order numerically evaluate two isotropic coupled damage models proposed by Johnson-Cook and Gurson-Tvergaard-Needleman (GTN), each of them corresponding to the first two previous group classification. Finite element analysis is used considering these damage mechanics approaches and the obtained results are compared with experimental Nakajima tests, thus being possible to evaluate and validate the ability to predict damage and formability limits for previous defined approaches.

Towards low back support with a passive biomimetic exo-spine.

PubMed

Naf, Matthias B; De Rijcke, Laura; Guerrero, Carlos Rodriguez; Millard, Matthew; Vanderborght, Bram; Lefeber, Dirk

2017-07-01

Low-Back Pain (LBP) affects a large portion of the working population. Preventive exoskeletons have been proposed to reduce the moments on the lower back, specifically around the lumbosacral (L5/S1) joint. High correlation has been shown, between reducing the moments around the L5/S1 joint and intervertebral compression forces, which in turn have been identified as a risk factor for developing LBP. However, most passive back support exoskeletons use rigid plates or stiff beams to support the spine that limit the range of motion of the wearer. A large range of motion and versatility are especially desirable for industrial applications. To overcome these limitations, a passive biomimetic exo-spine has been designed, modelled and an initial prototype tested. Its potential to allow for a large range of motion, whilst at the same time limiting the most extreme and potentially harmful postures has been shown.

Protecting posted genes: social networking and the limits of GINA.

PubMed

Soo-Jin Lee, Sandra; Borgelt, Emily

2014-01-01

The combination of decreased genotyping costs and prolific social media use is fueling a personal genetic testing industry in which consumers purchase and interact with genetic risk information online. Consumers and their genetic risk profiles are protected in some respects by the 2008 federal Genetic Information Nondiscrimination Act (GINA), which forbids the discriminatory use of genetic information by employers and health insurers; however, practical and technical limitations undermine its enforceability, given the everyday practices of online social networking and its impact on the workplace. In the Web 2.0 era, employers in most states can legally search about job candidates and employees online, probing social networking sites for personal information that might bear on hiring and employment decisions. We examine GINA's protections for online sharing of genetic information as well as its limitations, and propose policy recommendations to address current gaps that leave employees' genetic information vulnerable in a Web-based world.

Evaluation tests of industrial vacuum bearings for space use

NASA Astrophysics Data System (ADS)

Obara, S.; Sasaki, A.; Haraguchi, M.; Imagawa, K.; Nishimura, M.; Kawashima, N.

2001-09-01

Tribological performance of industrial vacuum bearings was experimentally evaluated for space use. The bearings selected for investigation were an 8 mm bore-sized deep-groove ball bearing lubricated with a sputtered MoS2 film and that lubricated with an ion-plated Ag film, commercially delivered from three Japanese domestic bearing-manufacturers. Based on survey results of tribological requirements for the existing satellite mechanisms, four types of bearing tests were defined and conducted: a vacuum test at room temperature, an atmosphere-resistant test, a thermal vacuum test and a vibration test. In addition to these tests, variation in tribological performance of the industrial bearings was also investigated. The results of more than eighty tests demonstrated that the industrial vacuum bearings had sufficient lubrication lives with low frictional torque and their data were reasonably repeatable, indicating very good potentiality for space use.

Industrial and Innovation Policy in Europe: The Effects on Growth and Sustainability

ERIC Educational Resources Information Center

Korres, George M.

2007-01-01

Industrial policy is a highly controversial issue. The European Union (EU) justifies its industrial policy on the grounds of common problems across countries, its capacity to coordinate and reduce duplication of efforts, its capacity to control and limit member-state subsidies to industries, and its mandate for foreign trade and competition…

Present and future trends of laser materials processing in Japan

NASA Astrophysics Data System (ADS)

Matsunawa, Akira

1991-10-01

Lasers quickly penetrated into Japanese industries in the mid-80s. The paper reviews the present situation of industrial lasers and their applications in Japanese industries for materials removal, joining, and some surface modification technologies as well as their economical evaluation compared with competitive technologies. Laser cutting of metallic and nonmetallic thin sheets is widely prevalent even in small scale industries as a flexible manufacturing tool. As for the laser welding is concerned, industrial applications are rather limited in mass production lines. This mainly comes from the fact that the present laser technologies have not employed the adaptive control because of the lack of sensors, monitoring, and control systems which can tolerate the high-precision and high-speed processing. In spite of this situation, laser welding is rapidly increasing in recent years in industries such as automotive, machinery, electric/electronic, steel, heavy industries, etc. Laser surface modification technologies have attracted significant interest from industrial people, but actual application is very limited today. However, the number of R&D papers is increasing year by year. The paper also reviews these new technology trends in Japan.

Safety assessment of a natural tomato oleoresin containing high amounts of Z-isomers of lycopene prepared with supercritical carbon dioxide.

PubMed

Honda, Masaki; Higashiura, Takuma; Fukaya, Tetsuya

2017-02-01

Z-isomers of lycopene, which are abundantly present in processed tomato products, are more bioavailable than (all-E)-lycopene found predominantly in raw tomatoes. Despite extensive studies on the bioavailability and biological activities of Z-isomers of lycopene, detailed studies on their safety and toxicology are limited. The geno-, acute and subacute toxicities of tomato oleoresin that contained high amounts of lycopene Z-isomers (10.9% lycopene with 66.3% Z-isomer content) and had been prepared with supercritical carbon dioxide were investigated. The oleoresin was non-mutagenic in the Ames test with and without metabolic activation (S9 mix). The medial lethal dose (LD 50 ) of the oleoresin in rats, as determined by a single-dose oral test, was more than 5000 mg kg body weight -1 (bw) [361 mg (Z)-lycopene kg bw -1 ]. In the 4-week repeated-dose oral toxicity test, rats were administered oleoresin at 4500 mg kg -1 day -1 [325 mg (Z)-lycopene kg bw -1 day -1 ]. There were no clinically significant changes with respect to vital signs, physical examination outcomes and laboratory test values during the test period. Based on our findings and as supported by its long history of consumption, tomato oleoresin that contains high amounts of Z-isomers of lycopene prepared with supercritical carbon dioxide can be considered as safe for human consumption. © 2016 Society of Chemical Industry. © 2016 Society of Chemical Industry.

Recent developments on SMA actuators: predicting the actuation fatigue life for variable loading schemes

NASA Astrophysics Data System (ADS)

Wheeler, Robert W.; Lagoudas, Dimitris C.

2017-04-01

Shape memory alloys (SMAs), due to their ability to repeatably recover substantial deformations under applied mechanical loading, have the potential to impact the aerospace, automotive, biomedical, and energy industries as weight and volume saving replacements for conventional actuators. While numerous applications of SMA actuators have been flight tested and can be found in industrial applications, these actuators are generally limited to non-critical components, are not widely implemented and frequently one-off designs, and are generally overdesigned due to a lack of understanding of the effect of the loading path on the fatigue life and the lack of an accurate method for predicting actuator lifetimes. In recent years, multiple research efforts have increased our understanding of the actuation fatigue process of SMAs. These advances can be utilized to predict the fatigue lives and failure loads in SMA actuators. Additionally, these prediction methods can be implemented in order to intelligently design actuators in accordance with their fatigue and failure limits. In the following paper, both simple and complex thermomechanical loading paths have been considered. Experimental data was utilized from two material systems: equiatomic Nickel-Titanium and Nickelrich Nickel-Titanium.

High-Performance Molybdenum Coating by Wire–HVOF Thermal Spray Process

NASA Astrophysics Data System (ADS)

Tailor, Satish; Modi, Ankur; Modi, S. C.

2018-04-01

Coating deposition on many industrial components with good microstructural, mechanical properties, and better wear resistance is always a challenge for the thermal spray community. A number of thermal spray methods are used to develop such promising coatings for many industrial applications, viz. arc spray, flame spray, plasma, and HVOF. All these processes have their own limitations to achieve porous free, very dense, high-performance wear-resistant coatings. In this work, an attempt has been made to overcome this limitation. Molybdenum coatings were deposited on low-carbon steel substrates using wire-high-velocity oxy-fuel (W-HVOF; WH) thermal spray system (trade name HIJET 9610®). For a comparison, Mo coatings were also fabricated by arc spray, flame spray, plasma spray, and powder-HVOF processes. As-sprayed coatings were analyzed using x-ray diffraction, scanning electron microscopy for phase, and microstructural analysis, respectively. Coating microhardness, surface roughness, and porosity were also measured. Adhesion strength and wear tests were conducted to determine the mechanical and wear properties of the as-sprayed coatings. Results show that the coatings deposited by W-HVOF have better performance in terms of microstructural, mechanical, and wear resistance properties, in comparison with available thermal spray process (flame spray and plasma spray).

Bioaugmentation: An Emerging Strategy of Industrial Wastewater Treatment for Reuse and Discharge

PubMed Central

Nzila, Alexis; Razzak, Shaikh Abdur; Zhu, Jesse

2016-01-01

A promising long-term and sustainable solution to the growing scarcity of water worldwide is to recycle and reuse wastewater. In wastewater treatment plants, the biodegradation of contaminants or pollutants by harnessing microorganisms present in activated sludge is one of the most important strategies to remove organic contaminants from wastewater. However, this approach has limitations because many pollutants are not efficiently eliminated. To counterbalance the limitations, bioaugmentation has been developed and consists of adding specific and efficient pollutant-biodegrading microorganisms into a microbial community in an effort to enhance the ability of this microbial community to biodegrade contaminants. This approach has been tested for wastewater cleaning with encouraging results, but failure has also been reported, especially during scale-up. In this review, work on the bioaugmentation in the context of removal of important pollutants from industrial wastewater is summarized, with an emphasis on recalcitrant compounds, and strategies that can be used to improve the efficiency of bioaugmentation are also discussed. This review also initiates a discussion regarding new research areas, such as nanotechnology and quorum sensing, that should be investigated to improve the efficiency of wastewater bioaugmentation. PMID:27571089

Molecular diagnostics for hereditary hearing loss in children.

PubMed

Sommen, Manou; Wuyts, Wim; Van Camp, Guy

2017-08-01

Hearing loss (HL) is the most common birth defect in industrialized countries with far-reaching social, psychological and cognitive implications. It is an extremely heterogeneous disease, complicating molecular testing. The introduction of next-generation sequencing (NGS) has resulted in great progress in diagnostics allowing to study all known HL genes in a single assay. The diagnostic yield is currently still limited, but has the potential to increase substantially. Areas covered: In this review the utility of NGS and the problems for comprehensive molecular testing for HL are evaluated and discussed. Expert commentary: Different publications have proven the appropriateness of NGS for molecular testing of heterogeneous diseases such as HL. However, several problems still exist, such as pseudogenic background of some genes and problematic copy number variant analysis on targeted NGS data. Another main challenge for the future will be the establishment of population specific mutation-spectra to achieve accurate personalized comprehensive molecular testing for HL.

Model Test Bed for Evaluating Wave Models and Best Practices for Resource Assessment and Characterization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Neary, Vincent Sinclair; Yang, Zhaoqing; Wang, Taiping

A wave model test bed is established to benchmark, test and evaluate spectral wave models and modeling methodologies (i.e., best practices) for predicting the wave energy resource parameters recommended by the International Electrotechnical Commission, IEC TS 62600-101Ed. 1.0 ©2015. Among other benefits, the model test bed can be used to investigate the suitability of different models, specifically what source terms should be included in spectral wave models under different wave climate conditions and for different classes of resource assessment. The overarching goal is to use these investigations to provide industry guidance for model selection and modeling best practices depending onmore » the wave site conditions and desired class of resource assessment. Modeling best practices are reviewed, and limitations and knowledge gaps in predicting wave energy resource parameters are identified.« less

The relationship between labor unions and safety in US airlines: Is there a "union effect?"

NASA Astrophysics Data System (ADS)

Zapf, Renee Catherine

Every airline union claims to work for safety and presents anecdotes where greater airline safety has been achieved through union efforts. The effect unionization has on safety outcomes in U.S. commercial airlines, however, wasn't found to be previously tested. Studies have shown that in industries such as coal mining, retail, and construction, unionization does lead to an increase in safety. This study evaluated the safety rates of 15 major US commercial airlines to compare the difference between unionized and non-unionized airlines. These safety rates were compared based on if and how long each airline's pilots and flight attendants have been unionized, to determine if unionization had an effect on safety outcomes. The 15 airlines included in the study identified as operating most of the years between 1990 and 2013, with annual departures averaging over 130,000, available through the Bureau of Transportation Statistics. Accident and Incident information was acquired through the National Transportation Safety Board database. The number of accident and incidents divided by the total departures at each airline was used as the safety rate. Union websites provided information on unionization at the airlines. Due to the complex nature of the aviation industry, a number of confounding factors could have affected the tests, including mergers, route structures, and legislation. To help control for these confounding factors, this study was limited to airlines with a stable presence in the industry over time, which limited the number of airlines included. No significant difference was found between unionized and non-unionized airlines in this study, though the mean safety rate of unionized airlines was found be better than non-unionized airlines. This study did not take into account safety improvements that were union-backed and eventually required at all airlines, regardless of unionization. Due to the large sample size of the small population the difference in safety rate means could be indicative of greater safety in unionized airlines.

Review: Semen sexing - current state of the art with emphasis on bovine species.

PubMed

Vishwanath, R; Moreno, J F

2018-06-01

It is approaching three decades since the first public evidence of sex-sorting of semen. The technology has progressed considerably since then with a number of institutions and researchers collaborating to eventually bring this to application. The technical challenges have been quite substantial and in the early years the application was limited to only heifer inseminations. Comparable fertility of sex-sorted semen with conventional semen has been an aspirational benchmark for the industry for many years. Significant investment in research in the primary biology of sex-sorted sperm and associated sorting equipment ensured steady progress over the years and current methods particularly the new SexedULTRA-4M™ seems to have now mostly bridged this fertility gap. The dairy and beef industry have adopted this technology quite rapidly. Other animal industries are progressively testing it for application in their specific niches and environments. The current state of the art in the fundamentals of sex-sorting, the biology of the process as well as new developments in machinery are described in this review.

Active Matrix OLED Test Report

NASA Technical Reports Server (NTRS)

Salazar, George

2013-01-01

This report focuses on the limited environmental testing of the AMOLED display performed as an engineering evaluation by The NASA Johnson Space Center (JSC)-specifically. EMI. Thermal Vac, and radiation tests. The AMOLED display is an active-matrix Organic Light Emitting Diode (OLED) technology. The testing provided an initial understanding of the technology and its suitability for space applications. Relative to light emitting diode (LED) displays or liquid crystal displays (LCDs), AMOLED displays provide a superior viewing experience even though they are much lighter and smaller, produce higher contrast ratio and richer colors, and require less power to operate than LCDs. However, AMOLED technology has not been demonstrated in a space environment. Therefore, some risks with the technology must be addressed before they can be seriously considered for human spaceflight. The environmental tests provided preliminary performance data on the ability of the display technology to handle some of the simulated induced space/spacecraft environments that an AMOLED display will see during a spacecraft certification test program. This engineering evaluation is part of a Space Act Agreement (SM) between The NASA/JSC and Honeywell International (HI) as a collaborative effort to evaluate the potential use of AMOLED technology for future human spaceflight missions- both government-led and commercial. Under this SM, HI is responsible for doing optical performance evaluation, as well as temperature and touch screen studies. The NASA/JSC is responsible for performing environmental testing comprised of EMI, Thermal Vac, and radiation tests. Additionally, as part of the testing, limited optical data was acquired to assess performance as the display was subjected to the induced environments. The NASA will benefit from this engineering evaluation by understanding AMOLED suitability for future use in space as well as becoming a smarter buyer (or developer) of the technology. HI benefits from the environmental testing results by understanding its performance limitations/shortcomings to improve subsequent generations of AMOLED technology. Note that the AMOLED used in this test was not deSigned for the space environment but rather for commercial/industrial terrestrial applications.

40 CFR 60.2145 - How do I demonstrate continuous compliance with the emission limitations and the operating limits?

Code of Federal Regulations, 2011 CFR

2011-07-01

... NEW STATIONARY SOURCES Standards of Performance for Commercial and Industrial Solid Waste Incineration...-to-fuel switch. (4) If you own or operate an existing commercial or industrial combustion unit that... internal and external corrosion. (3) Use a pressure sensor with a minimum tolerance of 1.27 centimeters of...

40 CFR 60.2710 - How do I demonstrate continuous compliance with the emission limitations and the operating limits?

Code of Federal Regulations, 2012 CFR

2012-07-01

... NEW STATIONARY SOURCES Emissions Guidelines and Compliance Times for Commercial and Industrial Solid...-to-fuel switch. (4) If you own or operate an existing commercial or industrial combustion unit that... internal and external corrosion. (3) Use a pressure sensor with a minimum tolerance of 1.27 centimeters of...

40 CFR 60.2145 - How do I demonstrate continuous compliance with the emission limitations and the operating limits?

Code of Federal Regulations, 2012 CFR

2012-07-01

... NEW STATIONARY SOURCES Standards of Performance for Commercial and Industrial Solid Waste Incineration...-to-fuel switch. (4) If you own or operate an existing commercial or industrial combustion unit that... internal and external corrosion. (3) Use a pressure sensor with a minimum tolerance of 1.27 centimeters of...

40 CFR 60.2145 - How do I demonstrate continuous compliance with the emission limitations and the operating limits?

Code of Federal Regulations, 2013 CFR

2013-07-01

... NEW STATIONARY SOURCES Standards of Performance for Commercial and Industrial Solid Waste Incineration... own or operate an existing commercial or industrial combustion unit that combusted a fuel or non-waste... internal and external corrosion. (3) Use a pressure sensor with a minimum tolerance of 1.27 centimeters of...

40 CFR 60.2145 - How do I demonstrate continuous compliance with the emission limitations and the operating limits?

Code of Federal Regulations, 2014 CFR

2014-07-01

... NEW STATIONARY SOURCES Standards of Performance for Commercial and Industrial Solid Waste Incineration... own or operate an existing commercial or industrial combustion unit that combusted a fuel or non-waste... external corrosion. (3) Use a pressure sensor with a minimum tolerance of 1.27 centimeters of water or a...

Limiting the Influence of Pharmaceutical Industry Gifts on Physicians: Self-Regulation or Government Intervention?

PubMed Central

2009-01-01

Concerns over the influence of pharmaceutical gifts on physicians have surged in recent years. This has prompted wide ranging legislative proposals in numerous states and in the federal government as well as stepped up efforts at self-regulation by the pharmaceutical industry and the medical profession. Policymakers face the decision of whether to defer to self-regulation or support government intervention. This commentary describes efforts at self-regulation by the pharmaceutical industry and the medical profession. The author examines and critiques the wide ranging legislative strategies pursued to limit the influence of pharmaceutical gifts on physicians and concludes with suggestions for policymakers and the profession to limit influence and preserve public trust. PMID:19756874

Designing testing service at baristand industri Medan’s liquid waste laboratory

NASA Astrophysics Data System (ADS)

Kusumawaty, Dewi; Napitupulu, Humala L.; Sembiring, Meilita T.

2018-03-01

Baristand Industri Medan is a technical implementation unit under the Industrial and Research and Development Agency, the Ministry of Industry. One of the services often used in Baristand Industri Medan is liquid waste testing service. The company set the standard of service is nine working days for testing services. At 2015, 89.66% on testing services liquid waste does not meet the specified standard of services company because of many samples accumulated. The purpose of this research is designing online services to schedule the coming the liquid waste sample. The method used is designing an information system that consists of model design, output design, input design, database design and technology design. The results of designing information system of testing liquid waste online consist of three pages are pages to the customer, the recipient samples and laboratory. From the simulation results with scheduled samples, then the standard services a minimum of nine working days can be reached.

Biocidal treatment and preservation of liquid fuels

DOE Office of Scientific and Technical Information (OSTI.GOV)

Siegert, W.

1995-05-01

Strict microbiological limit values are the result of damage caused by microorganisms in fuels. With MAR 71, a biocide based on methylenebisoxazolidine, a product is available which has been tested and approved by leading car manufacturers, the mineral oil industry, and NATO. Depending on the degree of microbiological contamination, different decontamination concepts are presented, and recommendations for the treatment of fuels which are contaminated when purchased are given. In order to avoid recontamination, planning principles or the new design of tanks are necessary. The possibility of convenient, economical and regular drainage is a key factor.

Numerical and Experimental Evaluation on the Residual Stresses of Welded Joints

NASA Astrophysics Data System (ADS)

Huh, Sun Chul; Park, Wonjo; Yang, Haesug; Jung, Haeyoung; Kim, Chuyoung

Wings for the defense industry such as fighters, missiles, and rockets should show no deformation or damage on the structure. The structures of existing wings had holes for weight reduction. The plates and frames were fixed with rivets or screws, which limited the weight reduction possible. In this study, an improvement was made in jointing methods through EB welding and laser welding. Welding strength was measured through tension testing. In addition, finite element analysis was performed for the welding process so as to deduce the optimum welding condition.

Conference on Occupational Health Aspects of Advanced Composite Technology in the Aerospace Industry Held in Dayton, Ohio on 6-9 February 1989. Volume 2. Proceedings

DTIC Science & Technology

1989-03-01

fibers do not appoear to be a significant inhalation hazard nor are they biologically active in several in vitro test systems. Minor skin and eye...Additional emphasis on defining various methods to be utilized to define exposure including biological monitoring and application of various skin absorption...Threshold Limit Values and Biological Indices for 1988-1989, Cincinnati, Ohio Bartek, M.J., LaBulde, J.A., and Maibach, H.I. (1983). Skin permeability

Determination of service standard time for liquid waste parameter in certification institution

NASA Astrophysics Data System (ADS)

Sembiring, M. T.; Kusumawaty, D.

2018-02-01

Baristand Industry Medan is a technical implementation unit under the Industrial and Research and Development Agency, the Ministry of Industry. One of the services often used in Baristand Industry Medan is liquid waste testing service. The company set the standard of service 9 working days for testing services. At 2015, 89.66% on testing services liquid waste does not meet the specified standard of services company. The purpose of this research is to specify the standard time of each parameter in testing services liquid waste. The method used is the stopwatch time study. There are 45 test parameters in liquid waste laboratory. The measurement of the time done 4 samples per test parameters using the stopwatch. From the measurement results obtained standard time that the standard Minimum Service test of liquid waste is 13 working days if there is testing E. coli.

The Unsheltered Workshop: A Guide to Work Stations in Industry.

ERIC Educational Resources Information Center

Rood, Lois

The manual describes a vocational training model using work stations within regular businesses or industry to help disabled persons adjust to employment. The work station in industry approach is explained to be more cost effective than sheltered workshops which limit the trainee as well as the agency and industry. Vocational goals are said to be…

Occupational exposure assessment for crystalline silica dust: approach in Poland and worldwide.

PubMed

Maciejewska, Aleksandra

2008-01-01

Crystalline silica is a health hazard commonly encountered in work environment. Occupational exposure to crystalline silica dust concerns workers employed in such industries as mineral, fuel-energy, metal, chemical and construction industry. It is estimated that over 2 million workers in the European Union are exposed to crystalline silica. In Poland, over 50 thousand people work under conditions of silica dust exposure exceeding the occupational exposure limit. The assessment of occupational exposure to crystalline silica is a multi-phase process, primarily dependent on workplace measurements, quantitative analyses of samples, and comparison of results with respective standards. The present article summarizes the approaches to and methods used for assessment of exposure to crystalline silica as adopted in different countries in the EU and worldwide. It also compares the occupational limit values in force in almost 40 countries. Further, it points out the consequences resulting from the fact that IARC has regarded the two most common forms of crystalline silica: quartz and cristobalite as human carcinogens. The article includes an inter-country review of the methods used for air sample collection, dust concentration measurements, and determination of crystalline silica. The selection was based on the GESTIS database which lists the methods approved by the European Union for the measurements and tests regarding hazardous agents. Special attention has been paid to the methods of determining crystalline silica. The author attempts to analyze the influence of analytical techniques, sample preparation and the reference materials on determination results. Also the operating parameters of the method, including limit of detection, limit of quantification, and precision, have been compared.

Solid waste from leather industry as adsorbent of organic dyes in aqueous-medium.

PubMed

Oliveira, Luiz C A; Gonçalves, Maraísa; Oliveira, Diana Q L; Guerreiro, Mário C; Guilherme, Luiz R G; Dallago, Rogério M

2007-03-06

The industrial tanning of leather usually produces considerable amounts of chromium-containing solid waste and liquid effluents and raises many concerns on its environmental effect as well as on escalating landfill costs. Actually, these shortcomings are becoming increasingly a limiting factor to this industrial activity that claims for alternative methods of residue disposals. In this work, it is proposed a novel alternative destination of the solid waste, based on the removal of organic contaminants from the out coming aqueous-residue. The adsorption isotherm pattern for the wet blue leather from the Aurea tanning industry in Erechim-RS (Brazil) showed that these materials present high activity on adsorbing the reactive red textile dye as well as other compounds. The adsorbent materials were characterized by IR spectroscopy and SEM and tested for the dye adsorption (reactive textile and methylene blue dyes). The concentrations of dyes were measured by UV-vis spectrophotometry and the chromium extraction from leather waste was realized by basic hydrolysis and determined by atomic absorption. As a low cost abundant adsorbent material with high adsorption ability on removing dye methylene blue (80mgg(-1)) and textile dye reactive red (163mgg(-1)), the leather waste is revealed to be a interesting alternative relatively to more costly adsorbent materials.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Underhill, Gary K; Carlson, Ronald A.; Clendinning, William A.

Discussion of the industrial utilization of geopressured geothermal energy is currently limited by the limited knowledge of the resource's distribution. However, the resource assessment activity in the Bureau of Economic Geology, The University of Texas at Austin, has identified a number of fairway or potential resource zones. These zones are located in Kenedy County; in and about Corpus Christi and Nueces Bays in Nueces, San Patricio, and Aransas Counties; in the coastal zones of Matagorda County; and in a crescent-shaped zone parallel to the coastline in Brazoria and Galveston Counties. The Kenedy and Matagorda County zones are situated in ruralmore » areas with little or no industrial activity. The Corpus Christi and Brazoria-Galveston zones are in and adjacent to highly industrialized and urbanized districts. The rural zones will require the establishment of new industries for geothermal fluid utilization while the industrial-urban zones will require either new industry, expansion to existing industry, or modification to existing plant and process. Proposed industries for geothermal fluid utilization can be considered with respect to fitting the industry to the available fluids; this has been the usual approach. An alternate approach is to fit the abailable fluids to the proposed industry. In order to follow the alternate approach requires consideration of ways to upgrade the quality of existing geothermal fluids or geothermal-derived or -energized fluids.« less

Xpert Flu for point-of-care diagnosis of human influenza in industrialized countries.

PubMed

Salez, Nicolas; Nougairede, Antoine; Ninove, Laetitia; Zandotti, Christine; de Lamballerie, Xavier; Charrel, Rémi N

2014-05-01

Respiratory infections, particularly those caused by influenza viruses, represent the third-most important cause of death in the world due to infectious diseases. Nevertheless, despite the enormous publicity attracted by epidemics due to these viruses, laboratory diagnosis, documentation and recording of respiratory diseases is still unsatisfactory. Available diagnostic tests capable of providing results rapidly are either limited and insufficiently sensitive or highly sensitive and specific but insufficiently rapid. Considerable investment and research efforts have been made towards the development of new diagnostics for influenza A and B viruses and the Xpert(®) Flu assay (Cepheid(®), CA, USA) has emerged as one of the most promising. In this article, we review current knowledge of the Xpert Flu test, discuss its potential value as a point-of-care test and outline the potential leads for future development.

Proceedings of the Symposium on Needs for Nondestructive Testing in the Forest Products Industries

Treesearch

1965-01-01

The purpose of this meeting was to bring together about 30 representatives of the various forest products industries and a few affiliated research and educational institutions to discuss and define industry needs for nondestructive testing. The necessity for such a meeting was made clear in the Symposium on Nondestructive Testing of Wood held at this Laboratory in...

Evaluation of two methods for monitoring surface cleanliness-ATP bioluminescence and traditional hygiene swabbing.

PubMed

Davidson, C A; Griffith, C J; Peters, A C; Fielding, L M

1999-01-01

The minimum bacterial detection limits and operator reproducibility of the Biotrace Clean-Tracetrade mark Rapid Cleanliness Test and traditional hygiene swabbing were determined. Areas (100 cm2) of food grade stainless steel were separately inoculated with known levels of Staphylococcus aureus (NCTC 6571) and Escherichia coli (ATCC 25922). Surfaces were sampled either immediately after inoculation while still wet, or after 60 min when completely dry. For both organisms the minimum detection limit of the ATP Clean-Tracetrade mark Rapid Cleanliness Test was 10(4) cfu/100 cm2 (p < 0.05) and was the same for wet and dry surfaces. Both organism type and surface status (i.e. wet or dry) influenced the minimum detection limits of hygiene swabbing, which ranged from 10(2) cfu/100 cm2 to >10(7) cfu/100 cm2. Hygiene swabbing percentage recovery rates for both organisms were less than 0.1% for dried surfaces but ranged from 0.33% to 8.8% for wet surfaces. When assessed by six technically qualified operators, the Biotrace Clean-Tracetrade mark Rapid Cleanliness Test gave superior reproducibility for both clean and inoculated surfaces, giving mean coefficients of variation of 24% and 32%, respectively. Hygiene swabbing of inoculated surfaces gave a mean CV of 130%. The results are discussed in the context of hygiene monitoring within the food industry. Copyright 1999 John Wiley & Sons, Ltd.

Paleoclimatological context and reference level of the 2°C and 1.5°C Paris Agreement long-term temperature limits

NASA Astrophysics Data System (ADS)

Lüning, Sebastian; Vahrenholt, Fritz

2017-12-01

The Paris Agreement adopted in December 2015 during the COP21 conference stipulates that the increase in the global average temperature is to be kept well below 2°C above “pre-industrial levels” and that efforts are pursued to limit the temperature increase to 1.5°C above “pre-industrial levels”. In order to further increase public acceptance of these limits it is important to transparently place the target levels and their baselines in a paleoclimatic context of the past 150,000 years (Last Interglacial, LIG) and in particular of the last 10,000 years (Holocene; Present Interglacial, PIG). Intense paleoclimatological research of the past decade has firmed up that pre-industrial temperatures have been highly variable which needs to be reflected in the pre-industrial climate baseline definitions. The currently used reference level 1850-1900 represents the end of the Little Ice Age (LIA).The LIA represents the coldest phase of the last 10,000 years when mean temperatures deviated strongly negatively from the Holocene average and which therefore are hard to justify as a representative pre-industrial baseline. The temperature level reached during the interval 1940-1970 may serve as a better reference level as it appears to roughly correspond to the average pre-industrial temperature of the past two millennia. Placing the climate limits in an enlarged paleoclimatic context will help to demonstrate that the chosen climate targets are valid and represent dangerous extremes of the known natural range of Holocene temperature variability.

Special report. New products that improve officer performance, safety.

PubMed

1991-12-01

The need for products that improve performance of security officers is counterbalanced these days by budgetary constraints. While this may limit major investments in security systems and personnel, less costly improvements or innovations might be worth considering. In this report, we will discuss four advances that may be valuable not only in hospital security, but in other industries as well. One of them, a smoke filter, was originally developed for the hotel industry. Another, a drug detection device, may replace the use of undercover agents or drug-sniffing' dogs in certain circumstances. The third new product is an economical patrol vehicle for parking facilities which might replace more costly vehicles such as golf carts or cars. The fourth product, a roving CCTV camera, is actually being tested at a Midwest medical center and may allow you to monitor areas of parking garages with cameras instead of officers on patrol.

The NASA Dryden Flight Research Center Unmanned Aircraft System Service Capabilities

NASA Technical Reports Server (NTRS)

Bauer, Jeff

2007-01-01

Over 60 years of Unmanned Aircraft System (UAS) expertise at the NASA Dryden Flight Research Center are being leveraged to provide capability and expertise to the international UAS community. The DFRC brings together technical experts, UAS, and an operational environment to provide government and industry a broad capability to conduct research, perform operations, and mature systems, sensors, and regulation. The cornerstone of this effort is the acquisition of both a Global Hawk (Northrop Grumman Corporation, Los Angeles, California) and Predator B (General Atomics Aeronautical Systems, Inc., San Diego, California) unmanned aircraft system (UAS). In addition, a test range for small UAS will allow developers to conduct research and development flights without the need to obtain approval from civil authorities. Finally, experts are available to government and industry to provide safety assessments in support of operations in civil airspace. These services will allow developers to utilize limited resources to their maximum capability in a highly competitive environment.

Parkinsonian Balance Deficits Quantified Using a Game Industry Board and a Specific Battery of Four Paradigms.

PubMed

Darbin, Olivier; Gubler, Coral; Naritoku, Dean; Dees, Daniel; Martino, Anthony; Adams, Elizabeth

2016-01-01

This study describes a cost-effective screening protocol for parkinsonism based on combined objective and subjective monitoring of balance function. Objective evaluation of balance function was performed using a game industry balance board and an automated analyses of the dynamic of the center of pressure in time, frequency, and non-linear domains collected during short series of stand up tests with different modalities and severity of sensorial deprivation. The subjective measurement of balance function was performed using the Dizziness Handicap Inventory questionnaire. Principal component analyses on both objective and subjective measurements of balance function allowed to obtained a specificity and selectivity for parkinsonian patients (vs. healthy subjects) of 0.67 and 0.71 respectively. The findings are discussed regarding the relevance of cost-effective balance-based screening system as strategy to meet the needs of broader and earlier screening for parkinsonism in communities with limited access to healthcare.

INDUSTRIAL/MILITARY ACTIVITY-INITIATED ACCIDENT SCREENING ANALYSIS

DOE Office of Scientific and Technical Information (OSTI.GOV)

D.A. Kalinich

1999-09-27

Impacts due to nearby installations and operations were determined in the Preliminary MGDS Hazards Analysis (CRWMS M&O 1996) to be potentially applicable to the proposed repository at Yucca Mountain. This determination was conservatively based on limited knowledge of the potential activities ongoing on or off the Nevada Test Site (NTS). It is intended that the Industrial/Military Activity-Initiated Accident Screening Analysis provided herein will meet the requirements of the ''Standard Review Plan for the Review of Safety Analysis Reports for Nuclear Power Plants'' (NRC 1987) in establishing whether this external event can be screened from further consideration or must be includedmore » as a design basis event (DBE) in the development of accident scenarios for the Monitored Geologic Repository (MGR). This analysis only considers issues related to preclosure radiological safety. Issues important to waste isolation as related to impact from nearby installations will be covered in the MGR performance assessment.« less

Assessment of Intralaminar Progressive Damage and Failure Analysis Using an Efficient Evaluation Framework

NASA Technical Reports Server (NTRS)

Hyder, Imran; Schaefer, Joseph; Justusson, Brian; Wanthal, Steve; Leone, Frank; Rose, Cheryl

2017-01-01

Reducing the timeline for development and certification for composite structures has been a long standing objective of the aerospace industry. This timeline can be further exacerbated when attempting to integrate new fiber-reinforced composite materials due to the large number of testing required at every level of design. computational progressive damage and failure analysis (PDFA) attempts to mitigate this effect; however, new PDFA methods have been slow to be adopted in industry since material model evaluation techniques have not been fully defined. This study presents an efficient evaluation framework which uses a piecewise verification and validation (V&V) approach for PDFA methods. Specifically, the framework is applied to evaluate PDFA research codes within the context of intralaminar damage. Methods are incrementally taken through various V&V exercises specifically tailored to study PDFA intralaminar damage modeling capability. Finally, methods are evaluated against a defined set of success criteria to highlight successes and limitations.

Feasibility Study on 3-D Printing of Metallic Structural Materials with Robotized Laser-Based Metal Additive Manufacturing

NASA Astrophysics Data System (ADS)

Ding, Yaoyu; Kovacevic, Radovan

2016-07-01

Metallic structural materials continue to open new avenues in achieving exotic mechanical properties that are naturally unavailable. They hold great potential in developing novel products in diverse industries such as the automotive, aerospace, biomedical, oil and gas, and defense. Currently, the use of metallic structural materials in industry is still limited because of difficulties in their manufacturing. This article studied the feasibility of printing metallic structural materials with robotized laser-based metal additive manufacturing (RLMAM). In this study, two metallic structural materials characterized by an enlarged positive Poisson's ratio and a negative Poisson's ratio were designed and simulated, respectively. An RLMAM system developed at the Research Center for Advanced Manufacturing of Southern Methodist University was used to print them. The results of the tensile tests indicated that the printed samples successfully achieved the corresponding mechanical properties.

An exploratory analysis of treatment completion and client and organizational factors using hierarchical linear modeling.

PubMed

Woodward, Albert; Das, Abhik; Raskin, Ira E; Morgan-Lopez, Antonio A

2006-11-01

Data from the Alcohol and Drug Services Study (ADSS) are used to analyze the structure and operation of the substance abuse treatment industry in the United States. Published literature contains little systematic empirical analysis of the interaction between organizational characteristics and treatment outcomes. This paper addresses that deficit. It develops and tests a hierarchical linear model (HLM) to address questions about the empirical relationship between treatment inputs (industry costs, types and use of counseling and medical personnel, diagnosis mix, patient demographics, and the nature and level of services used in substance abuse treatment), and patient outcomes (retention and treatment completion rates). The paper adds to the literature by demonstrating a direct and statistically significant link between treatment completion and the organizational and staffing structure of the treatment setting. Related reimbursement issues, questions for future analysis, and limitations of the ADSS for this analysis are discussed.

Online breakage detection of multitooth tools using classifier ensembles for imbalanced data

NASA Astrophysics Data System (ADS)

Bustillo, Andrés; Rodríguez, Juan J.

2014-12-01

Cutting tool breakage detection is an important task, due to its economic impact on mass production lines in the automobile industry. This task presents a central limitation: real data-sets are extremely imbalanced because breakage occurs in very few cases compared with normal operation of the cutting process. In this paper, we present an analysis of different data-mining techniques applied to the detection of insert breakage in multitooth tools. The analysis applies only one experimental variable: the electrical power consumption of the tool drive. This restriction profiles real industrial conditions more accurately than other physical variables, such as acoustic or vibration signals, which are not so easily measured. Many efforts have been made to design a method that is able to identify breakages with a high degree of reliability within a short period of time. The solution is based on classifier ensembles for imbalanced data-sets. Classifier ensembles are combinations of classifiers, which in many situations are more accurate than individual classifiers. Six different base classifiers are tested: Decision Trees, Rules, Naïve Bayes, Nearest Neighbour, Multilayer Perceptrons and Logistic Regression. Three different balancing strategies are tested with each of the classifier ensembles and compared to their performance with the original data-set: Synthetic Minority Over-Sampling Technique (SMOTE), undersampling and a combination of SMOTE and undersampling. To identify the most suitable data-mining solution, Receiver Operating Characteristics (ROC) graph and Recall-precision graph are generated and discussed. The performance of logistic regression ensembles on the balanced data-set using the combination of SMOTE and undersampling turned out to be the most suitable technique. Finally a comparison using industrial performance measures is presented, which concludes that this technique is also more suited to this industrial problem than the other techniques presented in the bibliography.

Industrial recovered-materials-utilization targets for the textile-mill-products industry

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

1979-01-01

The Congress, in the National Energy Conservation and Policy Act of 1978 (NECPA), directed the Department of Energy to establish materials recovery targets for the metals and metal products, paper and allied products, rubber, and textile-mill-products industries. The targets were developed to provide incentives for using energy-saving recorded materials and to provied a yardstick for measuring progress and improvement in this endeavor. The NECPA indicates that the targets should represent the maximum technically and economically feasible increase in the use of energy-saving recovered materials that each industry can achieve progressively by January 1, 1987. Materials affected by recovered-materials targets includemore » and are limited to aluminum, copper, lead, zinc, iron, steel, paper and associated products, textile-mill, products, and rubber. Using information gathered from the textile-mill-products industry and from other textile-relaed sources, DOE has developed recovered materials targets for that industry. This report presents those targets and their basis and justification. Following an overview of the textile industry, the chapters are: Textile-Mill-Products Industry Operations; Economic Analysis of the Textile-Mill-Products Industry; Governmental and Regulatory Influence on the US Textile Industry; Current Mill Use of Recovered Materials in the Textile-Mill-Products Industry; Limitations on the Use of Recovered Materials in the US Textile-Mill-Products Industry; Materials-Recovery Targets; and Government and Industry Actions That Could Increase the Use of Recovered Materials.« less

76 FR 40412 - Self-Regulatory Organizations; Financial Industry Regulatory Authority, Inc.; Notice of Filing...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-08

...-Regulatory Organizations; Financial Industry Regulatory Authority, Inc.; Notice of Filing and Immediate..., Financial Industry Regulatory Authority, Inc. (``FINRA'') filed with the Securities and Exchange Commission... a more limited application by their terms. For more information about the rulebook consolidation...

Phase 1 Space Fission Propulsion System Testing and Development Progress

NASA Technical Reports Server (NTRS)

VanDyke, Melissa; Houts, Mike; Godfroy, Tom; Dickens, Ricky; Poston, David; Kapernick, Rick; Reid, Bob; Salvail, Pat; Ring, Peter; Schafer, Charles (Technical Monitor)

2001-01-01

Successful development of space fission systems requires an extensive program of affordable and realistic testing. In addition to tests related to design/development of the fission system, realistic testing of the actual flight unit must also be performed. If the system is designed to operate within established radiation damage and fuel burn up limits while simultaneously being designed to allow close simulation of heat from fission using resistance heaters, high confidence in fission system performance and lifetime can be attained through a series of non-nuclear tests. The Safe Affordable Fission Engine (SAFE) test series, whose ultimate goal is the demonstration of a 300 kW flight configuration system, has demonstrated that realistic testing can be performed using non-nuclear methods. This test series, carried out in collaboration with other NASA centers, other government agencies, industry, and universities, successfully completed a testing program with a 30 kWt core, Stirling engine, and ion engine configuration. Additionally, a 100 kWt core is in fabrication and appropriate test facilities are being reconfigured. This paper describes the current SAFE non-nuclear tests, which includes test article descriptions, test results and conclusions, and future test plans.

Flight Test of the F/A-18 Active Aeroelastic Wing Airplane

NASA Technical Reports Server (NTRS)

Clarke, Robert; Allen, Michael J.; Dibley, Ryan P.; Gera, Joseph; Hodgkinson, John

2005-01-01

Successful flight-testing of the Active Aeroelastic Wing airplane was completed in March 2005. This program, which started in 1996, was a joint activity sponsored by NASA, Air Force Research Laboratory, and industry contractors. The test program contained two flight test phases conducted in early 2003 and early 2005. During the first phase of flight test, aerodynamic models and load models of the wing control surfaces and wing structure were developed. Design teams built new research control laws for the Active Aeroelastic Wing airplane using these flight-validated models; and throughout the final phase of flight test, these new control laws were demonstrated. The control laws were designed to optimize strategies for moving the wing control surfaces to maximize roll rates in the transonic and supersonic flight regimes. Control surface hinge moments and wing loads were constrained to remain within hydraulic and load limits. This paper describes briefly the flight control system architecture as well as the design approach used by Active Aeroelastic Wing project engineers to develop flight control system gains. Additionally, this paper presents flight test techniques and comparison between flight test results and predictions.

Test Facilities in Support of High Power Electric Propulsion Systems

NASA Technical Reports Server (NTRS)

VanDyke, Melissa; Houts, Mike; Godfroy, Thomas; Dickens, Ricky; Martin, James J.; Salvail, Patrick; Carter, Robert

2002-01-01

Successful development of space fission systems requires an extensive program of affordable and realistic testing. In addition to tests related to design/development of the fission system, realistic testing of the actual flight unit must also be performed. If the system is designed to operate within established radiation damage and fuel burn up limits while simultaneously being designed to allow close simulation of heat from fission using resistance heaters, high confidence in fission system performance and lifetime can be attained through non-nuclear testing. Through demonstration of systems concepts (designed by DOE National Laboratories) in relevant environments, this philosophy has been demonstrated through hardware testing in the High Power Propulsion Thermal Simulator (HPPTS). The HPPTS is designed to enable very realistic non-nuclear testing of space fission systems. Ongoing research at the HPPTS is geared towards facilitating research, development, system integration, and system utilization via cooperative efforts with DOE labs, industry, universities, and other NASA centers. Through hardware based design and testing, the HPPTS investigates High Power Electric Propulsion (HPEP) component, subsystem, and integrated system design and performance.

The HIV self-testing debate: where do we stand?

PubMed

Gagnon, Marilou; French, Martin; Hébert, Yamilee

2018-01-18

Emphasis on HIV testing as a gateway to prevention, treatment and care has grown tremendously over the past decade. In turn, this emphasis on testing has created a demand for new policies, programs, and technologies that can potentially increase access to and uptake of HIV testing. HIV self-testing (HST) technologies have gained important momentum following the approval of the over-the-counter self-tests in the United States, the UK, and France. While the renewed interest in HST has given rise to a number of high quality reviews of empirical studies conducted on this topic, we have yet to find an article that captures the extent of the debate on HST. A critical review of the literature on HST was conducted and organized into three categories based on the focus of the article: 1) Empirical research, 2) Arguments, and 3) Context. We focused exclusively on the second category which included ethical analyses, policy analyses, editorials, opinion pieces, commentaries, letters to the editor and so forth. 10 lines of argument on HST were identified in the literature: 1) Individual - Public Health, 2) Strengths - Limits, 3) Benefits - Harms, 4) Screening - Testing, 5) Target - Market, 6) Health Care - Industry, 7) Regulation - Restriction, 8) Resource-Rich Settings - Resource-Limited Settings, 9) Ethical - Unethical, and 10) Exceptionalism - Normalization. Each line of argument is presented and discussed in the paper. We conclude by providing examples of critical questions that should be raised in order to take the debate to another level and generate new ways of thinking about HST.

Error-proofing test system of industrial components based on image processing

NASA Astrophysics Data System (ADS)

Huang, Ying; Huang, Tao

2018-05-01

Due to the improvement of modern industrial level and accuracy, conventional manual test fails to satisfy the test standards of enterprises, so digital image processing technique should be utilized to gather and analyze the information on the surface of industrial components, so as to achieve the purpose of test. To test the installation parts of automotive engine, this paper employs camera to capture the images of the components. After these images are preprocessed including denoising, the image processing algorithm relying on flood fill algorithm is used to test the installation of the components. The results prove that this system has very high test accuracy.

78 FR 38024 - Magnolia LNG, LLC; Liquefied Natural Gas Limited; Notice of Intent To Prepare an Environmental...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-25

... land located within Industrial Canal South Shore PLC Tract 475 at the Port of Lake Charles. The... of material to be dredged from the Industrial Canal. The location is zoned for heavy industrial use on an industrial canal off the main Calcasieu River Ship Channel. Magnolia is still in the planning...

High Pressure Industrial Water Facility

NASA Technical Reports Server (NTRS)

1992-01-01

In conjunction with Space Shuttle Main Engine testing at Stennis, the Nordberg Water Pumps at the High Pressure Industrial Water Facility provide water for cooling the flame deflectors at the test stands during test firings.

Systematic examination of publicly-available information reveals the diverse and extensive corporate political activity of the food industry in Australia.

PubMed

Mialon, Melissa; Swinburn, Boyd; Allender, Steven; Sacks, Gary

2016-03-22

The political influence of the food industry, referred to as corporate political activity (CPA), represents a potential barrier to the development and implementation of effective public health policies for non-communicable diseases prevention. This paper reports on the feasibility and limitations of using publicly-available information to identify and monitor the CPA of the food industry in Australia. A systematic search was conducted for information from food industry, government and other publicly-available data sources in Australia. Data was collected in relation to five key food industry actors: the Australian Food and Grocery Council; Coca Cola; McDonald's; Nestle; and Woolworths, for the period January 2012 to February 2015. Data analysis was guided by an existing framework for classifying CPA strategies of the food industry. The selected food industry actors used multiple CPA strategies, with 'information and messaging' and 'constituency building' strategies most prominent. The systematic analysis of publicly-available information over a limited period was able to identify diverse and extensive CPA strategies of the food industry in Australia. This approach can contribute to accountability mechanisms for NCD prevention.

Dynamical Competition of IC-Industry Clustering from Taiwan to China

NASA Astrophysics Data System (ADS)

Tsai, Bi-Huei; Tsai, Kuo-Hui

2009-08-01

Most studies employ qualitative approach to explore the industrial clusters; however, few research has objectively quantified the evolutions of industry clustering. The purpose of this paper is to quantitatively analyze clustering among IC design, IC manufacturing as well as IC packaging and testing industries by using the foreign direct investment (FDI) data. The Lotka-Volterra system equations are first adopted here to capture the competition or cooperation among such three industries, thus explaining their clustering inclinations. The results indicate that the evolution of FDI into China for IC design industry significantly inspire the subsequent FDI of IC manufacturing as well as IC packaging and testing industries. Since IC design industry lie in the upstream stage of IC production, the middle-stream IC manufacturing and downstream IC packing and testing enterprises tend to cluster together with IC design firms, in order to sustain a steady business. Finally, Taiwan IC industry's FDI amount into China is predicted to cumulatively increase, which supports the industrial clustering tendency for Taiwan IC industry. Particularly, the FDI prediction of Lotka-Volterra model performs superior to that of the conventional Bass model after the forecast accuracy of these two models are compared. The prediction ability is dramatically improved as the industrial mutualism among each IC production stage is taken into account.

Essential oils and herbal extracts as antimicrobial agents in cosmetic emulsion.

PubMed

Herman, Anna; Herman, Andrzej Przemysław; Domagalska, Beata Wanda; Młynarczyk, Andrzej

2013-06-01

The cosmetic industry adapts to the needs of consumers seeking to limit the use of preservatives and develop of preservative-free or self-preserving cosmetics, where preservatives are replaced by raw materials of plant origin. The aim of study was a comparison of the antimicrobial activity of extracts (Matricaria chamomilla, Aloe vera, Calendula officinalis) and essential oils (Lavandulla officinallis, Melaleuca alternifolia, Cinnamomum zeylanicum) with methylparaben. Extracts (2.5 %), essential oils (2.5 %) and methylparaben (0.4 %) were tested against Pseudomonas aeruginosa ATCC 27853, Escherichia coli ATCC 25922, Staphylococcus aureus ATCC 29213, Candida albicans ATCC 14053. Essentials oils showed higher inhibitory activity against tested microorganism strain than extracts and methylparaben. Depending on tested microorganism strain, all tested extracts and essential oils show antimicrobial activity 0.8-1.7 and 1-3.5 times stronger than methylparaben, respectively. This shows that tested extracts and essential oils could replace use of methylparaben, at the same time giving a guarantee of microbiological purity of the cosmetic under its use and storage.

Slush Hydrogen Technology Program

NASA Technical Reports Server (NTRS)

Cady, Edwin C.

1994-01-01

A slush hydrogen (SH2) technology facility (STF) was designed, fabricated, and assembled by a contractor team of McDonnell Douglas Aerospace (MDA), Martin Marietta Aerospace Group (MMAG), and Air Products and Chemicals, Inc. (APCI). The STF consists of a slush generator which uses the freeze-thaw production process, a vacuum subsystem, a test tank which simulates the NASP vehicle, a triple point hydrogen receiver tank, a transfer subsystem, a sample bottle, a pressurization system, and a complete instrumentation and control subsystem. The STF was fabricated, checked-out, and made ready for testing under this contract. The actual SH2 testing was performed under the NASP consortium following NASP teaming. Pre-STF testing verified SH2 production methods, validated special SH2 instrumentation, and performed limited SH2 pressurization and expulsion tests which demonstrated the need for gaseous helium pre-pressurized of SH2 to control pressure collapse. The STF represents cutting-edge technology development by an effective Government-Industry team under very tight cost and schedule constraints.

Analysis of Factors Influencing Measurement Accuracy of Al Alloy Tensile Test Results

NASA Astrophysics Data System (ADS)

Podgornik, Bojan; Žužek, Borut; Sedlaček, Marko; Kevorkijan, Varužan; Hostej, Boris

2016-02-01

In order to properly use materials in design, a complete understanding of and information on their mechanical properties, such as yield and ultimate tensile strength must be obtained. Furthermore, as the design of automotive parts is constantly pushed toward higher limits, excessive measuring uncertainty can lead to unexpected premature failure of the component, thus requiring reliable determination of material properties with low uncertainty. The aim of the present work was to evaluate the effect of different metrology factors, including the number of tested samples, specimens machining and surface quality, specimens input diameter, type of testing and human error on the tensile test results and measurement uncertainty when performed on 2xxx series Al alloy. Results show that the most significant contribution to measurement uncertainty comes from the number of samples tested, which can even exceed 1 %. Furthermore, moving from experimental laboratory conditions to very intense industrial environment further amplifies measurement uncertainty, where even if using automated systems human error cannot be neglected.

27 CFR 8.4 - Jurisdictional limits.

Code of Federal Regulations, 2010 CFR

2010-04-01

.... The regulations in this part apply where: (1) The industry member requires, by agreement or otherwise, a retailer to purchase distilled spirits, wine, or malt beverages from such industry member to the...) The industry member engages in the practice of using a requirement to such an extent as substantially...

29 CFR 1915.11 - Scope, application and definitions applicable to this subpart.

Code of Federal Regulations, 2013 CFR

2013-07-01

... designated representative. Certified Industrial Hygienist (CIH) means an industrial hygienist who is certified by the American Board of Industrial Hygiene. Coast Guard authorized person means an individual who... engineering controls, personal protective equipment, clothing, and time limitations are as specified by the...

29 CFR 1915.11 - Scope, application and definitions applicable to this subpart.

Code of Federal Regulations, 2011 CFR

2011-07-01

... designated representative. Certified Industrial Hygienist (CIH) means an industrial hygienist who is certified by the American Board of Industrial Hygiene. Coast Guard authorized person means an individual who... engineering controls, personal protective equipment, clothing, and time limitations are as specified by the...

29 CFR 1915.11 - Scope, application and definitions applicable to this subpart.

Code of Federal Regulations, 2012 CFR

2012-07-01

... designated representative. Certified Industrial Hygienist (CIH) means an industrial hygienist who is certified by the American Board of Industrial Hygiene. Coast Guard authorized person means an individual who... engineering controls, personal protective equipment, clothing, and time limitations are as specified by the...

29 CFR 1915.11 - Scope, application and definitions applicable to this subpart.

Code of Federal Regulations, 2010 CFR

2010-07-01

... designated representative. Certified Industrial Hygienist (CIH) means an industrial hygienist who is certified by the American Board of Industrial Hygiene. Coast Guard authorized person means an individual who... engineering controls, personal protective equipment, clothing, and time limitations are as specified by the...

31 CFR 538.210 - Prohibited transactions relating to petroleum and petrochemical industries.

Code of Federal Regulations, 2010 CFR

2010-07-01

... petroleum and petrochemical industries. 538.210 Section 538.210 Money and Finance: Treasury Regulations... SUDANESE SANCTIONS REGULATIONS Prohibitions § 538.210 Prohibited transactions relating to petroleum and... relating to the petroleum or petrochemical industries in Sudan, including, but not limited to, oilfield...

31 CFR 538.210 - Prohibited transactions relating to petroleum and petrochemical industries.

Code of Federal Regulations, 2011 CFR

2011-07-01

... petroleum and petrochemical industries. 538.210 Section 538.210 Money and Finance: Treasury Regulations... SUDANESE SANCTIONS REGULATIONS Prohibitions § 538.210 Prohibited transactions relating to petroleum and... relating to the petroleum or petrochemical industries in Sudan, including, but not limited to, oilfield...

Translating Research on Myoelectric Control into Clinics-Are the Performance Assessment Methods Adequate?

PubMed

Vujaklija, Ivan; Roche, Aidan D; Hasenoehrl, Timothy; Sturma, Agnes; Amsuess, Sebastian; Farina, Dario; Aszmann, Oskar C

2017-01-01

Missing an upper limb dramatically impairs daily-life activities. Efforts in overcoming the issues arising from this disability have been made in both academia and industry, although their clinical outcome is still limited. Translation of prosthetic research into clinics has been challenging because of the difficulties in meeting the necessary requirements of the market. In this perspective article, we suggest that one relevant factor determining the relatively small clinical impact of myocontrol algorithms for upper limb prostheses is the limit of commonly used laboratory performance metrics. The laboratory conditions, in which the majority of the solutions are being evaluated, fail to sufficiently replicate real-life challenges. We qualitatively support this argument with representative data from seven transradial amputees. Their ability to control a myoelectric prosthesis was tested by measuring the accuracy of offline EMG signal classification, as a typical laboratory performance metrics, as well as by clinical scores when performing standard tests of daily living. Despite all subjects reaching relatively high classification accuracy offline, their clinical scores varied greatly and were not strongly predicted by classification accuracy. We therefore support the suggestion to test myocontrol systems using clinical tests on amputees, fully fitted with sockets and prostheses highly resembling the systems they would use in daily living, as evaluation benchmark. Agreement on this level of testing for systems developed in research laboratories would facilitate clinically relevant progresses in this field.

Energy Engineering Analysis Program, limited energy study of steam distribution systems, Hawthorne Army Ammunition Depot, Hawthorne, Nevada. Energy report

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1995-07-01

This report summarizes all work of the Limited Energy Study of Steam Distribution Systems, Energy Engineering Analysis Program, Hawthorne Army Ammunition Depot (HWAAD), Nevada. The purpose of this limited energy study is to evaluate steam distribution and condensate collection systems in both the Industrial Area and Ordnance Area of HWAAD to develop a set of replacement actions that will reduce energy consumption and operating costs. These efforts consist of corrections and revisions to previously submitted funding requests. A number of facilities covering over 140,000 acres constitute HWAAD; however, this study was limited to the Industrial and Ordnance Areas.

Alcohol consumption in the Australian coal mining industry.

PubMed

Tynan, Ross J; Considine, Robyn; Wiggers, John; Lewin, Terry J; James, Carole; Inder, Kerry; Kay-Lambkin, Frances; Baker, Amanda L; Skehan, Jaelea; Perkins, David; Kelly, Brian J

2017-03-01

To investigate patterns of alcohol use within the coal mining industry, and associations with the personal, social, workplace and employment characteristics. 8 mine sites across 3 eastern Australian states were surveyed, selected to encompass key geographic characteristics (accessibility and remoteness) and mine type (open cut and underground). Problematic alcohol use was measured using the Alcohol Use Disorders Identification Test (AUDIT) to determine: (1) overall risky or hazardous drinking behaviour; and (2) frequency of single-occasion drinking (6 or more drinks on 1 occasion). A total of 1457 employees completed the survey, of which 45.7% of male and 17.0% of female participants reported levels of alcohol use within the range considered as risky or hazardous, considerably higher than the national average. Hierarchical linear regression revealed a significant contribution of many individual level factors associated with AUDIT scores: younger age, male, current smoking status; illicit substance use; previous alcohol and other drug use (AOD) problems; and higher psychological distress. Workplace factors associated with alcohol use included working in mining primarily for the high remuneration, and the type of mining, with underground miners reporting higher alcohol use than open-cut miners. Our findings provide support for the need to address alcohol use in the coal mining industry over and above routine on-site testing for alcohol use. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Making Progress and Gaining Momentum in Global 3Rs Efforts: How the European Pharmaceutical Industry Is Contributing

PubMed Central

Fleetwood, Gill; Chlebus, Magda; Coenen, Joachim; Dudoignon, Nicolas; Lecerf, Catherine; Maisonneuve, Catherine; Robinson, Sally

2015-01-01

Animal research together with other investigational methods (computer modeling, in vitro tests, etc) remains an indispensable part of the pharmaceutical research and development process. The European pharmaceutical industry recognizes the responsibilities inherent in animal research and is committed to applying and enhancing 3Rs principles. New nonsentient, ex vivo, and in vitro methods are developed every day and contribute to reducing and, in some instances, replacing in vivo studies. Their utility is however limited by the extent of our current knowledge and understanding of complex biological systems. Until validated alternative ways to model these complex interactions become available, animals remain indispensable in research and safety testing. In the interim, scientists continue to look for ways to reduce the number of animals needed to obtain valid results, refine experimental techniques to enhance animal welfare, and replace animals with other research methods whenever feasible. As research goals foster increasing cross-sector and international collaboration, momentum is growing to enhance and coordinate scientific innovation globally—beyond a single company, stakeholder group, sector, region, or country. The implementation of 3Rs strategies can be viewed as an integral part of this continuously evolving science, demonstrating the link between science and welfare, benefiting both the development of new medicines and animal welfare. This goal is one of the key objectives of the Research and Animal Welfare working group of the European Federation of Pharmaceutical Industries and Associations. PMID:25836966

Making progress and gaining momentum in global 3Rs efforts: how the European pharmaceutical industry is contributing.

PubMed

Fleetwood, Gill; Chlebus, Magda; Coenen, Joachim; Dudoignon, Nicolas; Lecerf, Catherine; Maisonneuve, Catherine; Robinson, Sally

2015-03-01

Animal research together with other investigational methods (computer modeling, in vitro tests, etc) remains an indispensable part of the pharmaceutical research and development process. The European pharmaceutical industry recognizes the responsibilities inherent in animal research and is committed to applying and enhancing 3Rs principles. New nonsentient, ex vivo, and in vitro methods are developed every day and contribute to reducing and, in some instances, replacing in vivo studies. Their utility is however limited by the extent of our current knowledge and understanding of complex biological systems. Until validated alternative ways to model these complex interactions become available, animals remain indispensable in research and safety testing. In the interim, scientists continue to look for ways to reduce the number of animals needed to obtain valid results, refine experimental techniques to enhance animal welfare, and replace animals with other research methods whenever feasible. As research goals foster increasing cross-sector and international collaboration, momentum is growing to enhance and coordinate scientific innovation globally-beyond a single company, stakeholder group, sector, region, or country. The implementation of 3Rs strategies can be viewed as an integral part of this continuously evolving science, demonstrating the link between science and welfare, benefiting both the development of new medicines and animal welfare. This goal is one of the key objectives of the Research and Animal Welfare working group of the European Federation of Pharmaceutical Industries and Associations.

An entrepreneurial physics method and its experimental test

NASA Astrophysics Data System (ADS)

Brown, Robert

2012-02-01

As faculty in a master's program for entrepreneurial physics and in an applied physics PhD program, I have advised upwards of 40 master and doctoral theses in industrial physics. I have been closely involved with four robust start-up manufacturing companies focused on physics high-technology and I have spent 30 years collaborating with industrial physicists on research and development. Thus I am in a position to reflect on many articles and advice columns centered on entrepreneurship. What about the goals, strategies, resources, skills, and the 10,000 hours needed to be an entrepreneur? What about business plans, partners, financing, patents, networking, salesmanship and regulatory affairs? What about learning new technology, how to solve problems and, in fact, learning innovation itself? At this point, I have my own method to propose to physicists in academia for incorporating entrepreneurship into their research lives. With this method, we do not start with a major invention or discovery, or even with a search for one. The method is based on the training we have, and the teaching we do (even quantum electrodynamics!), as physicists. It is based on the networking we build by 1) providing courses of continuing education for people working in industry and 2) through our undergraduate as well as graduate students who have gone on to work in industry. In fact, if we were to be limited to two words to describe the method, they are ``former students.'' Data from local and international medical imaging manufacturing industry are presented.

Louisiana SIP: LAC 33:III Ch 21 Subchap J, 2147--Limiting Volatile Organic Compound (VOC) Emissions from Reactor Processes and Distillation Operations in Synthetic Organic Chemical manufacturing Industry (SOCMI); SIP effective 1998-02-02 (LAc74) to more..

EPA Pesticide Factsheets

Louisiana SIP: LAC 33:III Ch 21 Subchap J, 2147--Limiting Volatile Organic Compound (VOC) Emissions from Reactor Processes and Distillation Operations in Synthetic Organic Chemical manufacturing Industry (SOCMI); SIP effective 1998-02-02 (LAc74) more...

Louisiana SIP: LAC 33:III Ch 2147. Limiting Volatile Organic Compound (VOC) Emissions from Reactor Processes and Distillation Operations in Synthetic Organic Chemical manufacturing Industry (SOCMI); SIP effective 2011-08-04 (LAd34) to 2017-09-27

EPA Pesticide Factsheets

Louisiana SIP: LAC 33:III Ch 2147. Limiting Volatile Organic Compound (VOC) Emissions from Reactor Processes and Distillation Operations in Synthetic Organic Chemical manufacturing Industry (SOCMI); SIP effective 2011-08-04 (LAd34) to 2017-09-27

AN ENVIRONMENTAL TECHNOLOGY VERIFICATION (ETV) PERFORMANCE TESTING OF THE INDUSTRIAL TEST SYSTEM, INC. CYANIDE REAGENTSTRIP™ TEST KIT

EPA Science Inventory

Cyanide can be present in various forms in water. The cyanide test kit evaluated in this verification study (Industrial Test System, Inc. Cyanide Regent Strip ™ Test Kit) was designed to detect free cyanide in water. This is done by converting cyanide in water to cyanogen...

Survey of Occupational Allergic Contact Dermatitis and Patch Test among Clothing Employees in Beijing.

PubMed

Chen, Yu-Xin; Gao, Bing-Ai; Cheng, Hai-Yan; Li, Lin-Feng

2017-01-01

Occupational population-based epidemiological data relating to occupational contact allergies in the Chinese clothing industry are limited. To investigate the prevalence of occupational allergic contact dermatitis (OACD) and to identify the causative allergens among clothing employees in China, a cross-sectional study was conducted in 529 clothing employees at 12 clothing factories in Beijing. All employees were subjected to an interview using self-administered questionnaire and skin examination, and those who were diagnosed with occupational contact dermatitis (OCD) were patch tested. In the present survey, we found that the overall 1-year prevalence of OACD among the clothing employees was 8.5%. The 1-year prevalence of OACD among workers (10.8%) was significantly higher than that among managers (3.2%). The lesions were primarily on the hands and wrists in workers, but the face and neck in managers. The major allergens were nickel sulfate and cobalt dichloride in workers and colophony and p -tert-butylphenol formaldehyde resin in managers. In conclusion, workers are at a higher risk of OACD compared with managers in the Chinese clothing industry. In addition to hand dermatitis in workers, airborne contact dermatitis on the face and neck should be also addressed in managers.

Robotics: a way to link the "islands of automation".

PubMed

O'Bryan, D

1994-01-01

This article looks at what the natural evolution of robots can do for the clinical testing industry, from performing simple functions to becoming the prime labor force of the clinical laboratory. Until now, robots have been applied to instrument processes as somewhat of an upgrade to accomplish a variety of laboratory tasks. Over the next 10 years, however, robotics development will respond to the internal and external influences expected to challenge the industry. A limited supply of human workers and the increased demands of testing volumes and cost-effectiveness will herald a new phase of robotics to link, as well as develop, technological capabilities. Since science fiction was invented, robots have teased the imagination-alternately as mindless automatons or as clones of their inventors endowed with minds of their own. The appeal in the first case was the seemingly infinite capacity for performing menial tasks too boring, complex, or dangerous for mankind. The appeal in the second was the fantasy of artificial intelligence. In both cases, the fictional concept has become reality--and, by the 21st century, should even be commonplace. Financial encouragement of robotics development might even be a mission for laboratories themselves, as they prepare for potential competition from even more complex technology.

2014 Annual Industrial Wastewater Reuse Report for the Idaho National Laboratory Site’s Advanced Test Reactor Complex Cold Waste Pond

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lewis, Mike

This report describes conditions, as required by the state of Idaho Industrial Wastewater Reuse Permit (LA 000161 01, Modification B), for the wastewater land application site at the Idaho National Laboratory Site’s Advanced Test Reactor Complex Cold Waste Pond from November 1, 2013–October 31, 2014. The report contains the following information; Facility and system description; Permit required effluent monitoring data and loading rates; Permit required groundwater monitoring data; Status of compliance activities; Noncompliance issues; and Discussion of the facility’s environmental impacts. During the 2014 permit year, approximately 238 million gallons of wastewater were discharged to the Cold Waste Pond. Thismore » is well below the maximum annual permit limit of 375 million gallons. As shown by the groundwater sampling data, sulfate and total dissolved solids concentrations are highest near the Cold Waste Pond and decrease rapidly as the distance from the Cold Waste Pond increases. Although concentrations of sulfate and total dissolved solids are elevated near the Cold Waste Pond, both parameters are below the Ground Water Quality Rule Secondary Constituent Standards in the downgradient monitoring wells.« less

Survey of Occupational Allergic Contact Dermatitis and Patch Test among Clothing Employees in Beijing

PubMed Central

Chen, Yu-Xin; Gao, Bing-Ai; Cheng, Hai-Yan

2017-01-01

Occupational population-based epidemiological data relating to occupational contact allergies in the Chinese clothing industry are limited. To investigate the prevalence of occupational allergic contact dermatitis (OACD) and to identify the causative allergens among clothing employees in China, a cross-sectional study was conducted in 529 clothing employees at 12 clothing factories in Beijing. All employees were subjected to an interview using self-administered questionnaire and skin examination, and those who were diagnosed with occupational contact dermatitis (OCD) were patch tested. In the present survey, we found that the overall 1-year prevalence of OACD among the clothing employees was 8.5%. The 1-year prevalence of OACD among workers (10.8%) was significantly higher than that among managers (3.2%). The lesions were primarily on the hands and wrists in workers, but the face and neck in managers. The major allergens were nickel sulfate and cobalt dichloride in workers and colophony and p-tert-butylphenol formaldehyde resin in managers. In conclusion, workers are at a higher risk of OACD compared with managers in the Chinese clothing industry. In addition to hand dermatitis in workers, airborne contact dermatitis on the face and neck should be also addressed in managers. PMID:28396866

2013 Annual Industrial Wastewater Reuse Report for the Idaho National Laboratory Site’s Advanced Test Reactor Complex Cold Waste Pond

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mike Lewis

2014-02-01

This report describes conditions, as required by the state of Idaho Industrial Wastewater Reuse Permit (#LA 000161 01, Modification B), for the wastewater land application site at the Idaho National Laboratory Site’s Advanced Test Reactor Complex Cold Waste Pond from November 1, 2012–October 31, 2013. The report contains the following information: • Facility and system description • Permit required effluent monitoring data and loading rates • Groundwater monitoring data • Status of compliance activities • Noncompliance issues • Discussion of the facility’s environmental impacts. During the 2013 permit year, approximately 238 million gallons of wastewater was discharged to the Coldmore » Waste Pond. This is well below the maximum annual permit limit of 375 million gallons. As shown by the groundwater sampling data, sulfate and total dissolved solids concentrations are highest near the Cold Waste Pond and decrease rapidly as the distance from the Cold Waste Pond increases. Although concentrations of sulfate and total dissolved solids are elevated near the Cold Waste Pond, both parameters are below the Ground Water Quality Rule Secondary Constituent Standards in the down gradient monitoring wells.« less

2012 Annual Industrial Wastewater Reuse Report for the Idaho National Laboratory Site's Advanced Test Reactor Complex Cold Waste Pond

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mike Lewis

2013-02-01

This report describes conditions, as required by the state of Idaho Industrial Wastewater Reuse Permit (#LA 000161 01, Modification B), for the wastewater land application site at the Idaho National Laboratory Site’s Advanced Test Reactor Complex Cold Waste Pond from November 1, 2011 through October 31, 2012. The report contains the following information: Facility and system description Permit required effluent monitoring data and loading rates Groundwater monitoring data Status of compliance activities Noncompliance issues Discussion of the facility’s environmental impacts During the 2012 permit year, approximately 183 million gallons of wastewater were discharged to the Cold Waste Pond. This ismore » well below the maximum annual permit limit of 375 million gallons. As shown by the groundwater sampling data, sulfate and total dissolved solids concentrations are highest near the Cold Waste Pond and decrease rapidly as the distance from the Cold Waste Pond increases. Although concentrations of sulfate and total dissolved solids are elevated near the Cold Waste Pond, both parameters were below the Ground Water Quality Rule Secondary Constituent Standards in the down gradient monitoring wells.« less

High productivity mould robotic milling in Al-5083

NASA Astrophysics Data System (ADS)

Urresti, Iker; Arrazola, Pedro Jose; Ørskov, Klaus Bonde; Pelegay, Jose Angel

2018-05-01

Industrial serial robots were usually limited to welding, handling or spray painting operations until very recent years. However, some industries have already realized about their important capabilities in terms of flexibility, working space, adaptability and cost. Hence, currently they are seriously being considered to carry out certain metal machining tasks. Therefore, robot based machining is presented as a cost-saving and flexible manufacturing alternative compared to conventional CNC machines especially for roughing or even pre-roughing of large parts. Nevertheless, there are still some drawbacks usually referred as low rigidity, accuracy and repeatability. Thus, the process productivity is usually sacrificed getting low Material Removal Rates (MRR), and consequently not being competitive. Nevertheless, in this paper different techniques to obtain increased productivity are presented, though an appropriate selection of cutting strategies and parameters that are essential for it. During this research some rough milling tests in Al-5083 are presented where High Feed Milling (HFM) is implemented as productive cutting strategy and the experimental modal analysis named Tap-testing is used for the suitable choice of cutting conditions. Competitive productivity rates are experienced while process stability is checked through the cutting forces measurements in order to prove the effectiveness of the experimental modal analysis for robotic machining.

CMOS-MEMS Chemiresistive and Chemicapacitive Chemical Sensor System

NASA Astrophysics Data System (ADS)

Lazarus, Nathan S.

Integrating chemical sensors with testing electronics is a powerful technique with the potential to lower power and cost and allow for lower system limits of detection. This thesis explores the possibility of creating an integrated sensor system intended to be embedded within respirator cartridges to notify the user that hazardous chemicals will soon leak into the face mask. For a chemical sensor designer, this application is particularly challenging due to the need for a very sensitive and cheap sensor that will be exposed to widely varying environmental conditions during use. An octanethiol-coated gold nanoparticle chemiresistor to detect industrial solvents is developed, focusing on characterizing the environmental stability and limits of detection of the sensor. Since the chemiresistor was found to be highly sensitive to water vapor, a series of highly sensitive humidity sensor topologies were developed, with sensitivities several times previous integrated capacitive humidity sensors achieved. Circuit techniques were then explored to reduce the humidity sensor limits of detection, including the analysis of noise, charge injection, jitter and clock feedthrough in a charge-based capacitance measurement (CBCM) circuit and the design of a low noise Colpitts LC oscillator. The characterization of high resistance gold nanoclusters for capacitive chemical sensing was also performed. In the final section, a preconcentrator, a heater element intended to release a brief concentrated pulse of analate, was developed and tested for the purposes of lowering the system limit of detection.

Advanced, Energy-Efficient Hybrid Membrane System for Industrial Water Reuse

DOE Office of Scientific and Technical Information (OSTI.GOV)

Toy, Lora; Choi, Young Chul; Hendren, Zachary

In the U.S. manufacturing sector, current industrial water use practices are energy-intensive and utilize and discharge high volumes of waters, rendering them not sustainable especially in light of the growing scarcity of suitable water supplies. To help address this problem, the goal of this project was to develop an advanced, cost-effective, hybrid membrane-based water treatment system that can improve the energy efficiency of industrial wastewater treatment while allowing at least 50% water reuse efficiency. This hybrid process would combine emerging Forward Osmosis (FO) and Membrane Distillation (MD) technology components into an integrated FO-MD system that can beneficially utilize low-grade wastemore » heat (i.e., T < 450 °F) in industrial facilities to produce distilled-quality product water for reuse. In this project, laboratory-, bench-, and pilot-scale experiments on the hybrid FO-MD system were conducted for industrial wastewater treatment. It was demonstrated at laboratory, bench, and pilot scales that FO-MD membrane technology can concentrate brine to very high total dissolved solids (TDS) levels (>200,000 ppm) that are at least 2.5 times higher than the TDS level to which RO can achieve. In laboratory testing, currently available FO and MD membranes were tested to select for high-performing membranes with high salt rejection and high water flux. Multiple FO membrane/draw-salt solution combinations that gave high water flux with higher than 98% salt rejection were also identified. Reverse draw-salt fluxes were observed to be much lower for divalent salts than for monovalent salts. MD membranes were identified that had 99.9+% salt rejection and water flux as high as 50-90 L/(m 2·h) for flat-sheet membranes and >20 L/(m 2·h) for hollow fibers. In bench-scale testing, a single unit of commercially available FO and MD membrane modules were evaluated for continuous, integrated operation. Using the laboratory- and bench-scale test data, numerical modeling was performed on the FO and MD processes to estimate engineering parameters for a larger-scale pilot unit. Based on the experimental studies and modeling results, a pilot-scale, integrated FO-MD prototype unit was designed and built for trailer-mounted operation. This prototype system was fed real industrial wastewater, which could not be further treated by conventional technologies, from an oil production facility and was successfully operated for over 15 weeks without major stoppage. About 90% water recovery was possible, while concentrating the TDS from 12,000 ppm up to 190,500 ppm. The FO-MD prototype rejected most wastewater contaminants while producing water with <300 ppm TDS, even when the feed TDS was higher than 150,000 ppm. No chemical cleaning was necessary during the pilot testing period. Flushing the system with dechlorinated tap water was sufficient to reset the membranes for the next set of test conditions. Pilot performance and membrane autopsy showed that, even though the feed was concentrated more than 10 times, membrane fouling was unnoticeable and no defects were detected on the FO and MD membrane surfaces. This project demonstrated the technical feasibility of the hybrid FO-MD process by taking water already treated to the limit with the highest level of current technologies and further concentrating it 10-fold by using mostly low-cost materials. Because no membranes suitable for full-scale plant applications are available at present, economical feasibility of the hybrid technology is still uncertain, but it is expected that broader industry participation can further reduce FO-MD process costs.« less

27 CFR 10.4 - Jurisdictional limits.

Code of Federal Regulations, 2010 CFR

2010-04-01

...) General. The regulations in this part apply where: (1) The industry member induces a trade buyer to purchase distilled spirits, wine, or malt beverages from such industry member to the exclusion, in whole or... industry member engages in the practice of using an inducement to such an extent as substantially to...

75 FR 27606 - Self-Regulatory Organizations; Financial Industry Regulatory Authority, Inc.; Notice of Filing...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-17

...-Regulatory Organizations; Financial Industry Regulatory Authority, Inc.; Notice of Filing and Immediate Effectiveness of Proposed Rule Change Relating to the Trade Reporting Facility Limited Liability Company...\\ and Rule 19b-4 thereunder,\\2\\ notice is hereby given that on April 27, 2010, the Financial Industry...

Indonesian Politics and Economics (Selected Translations).

DTIC Science & Technology

1961-01-10

the’rise of industries to such a proportion, particularly’in England, that it brought about the " industrial revolution ".. ’ -: Surplus capital...only limited sources of raw materials. The industrial revolution , in iEngland required an inöreased supply of raw materials, and at the sam§ time the

Industrial Communications.

ERIC Educational Resources Information Center

Lindsay, Dan

Intended for seniors planning a career in industry as skilled laborers, this specialized course in Industrial Communications offers the student basic communications skills which he will need in his work and in his daily life. Since class activities center around short, factual oral reports, class size will be limited to 20, providing a maximum of…

Interdisciplinary Industrial Ecology Education: Recommendations for an Inclusive Pedagogical Model

ERIC Educational Resources Information Center

Sharma, Archana

2009-01-01

Industrial ecology education is being developed and delivered predominantly within the domains of engineering and management. Such an approach could prove somewhat limiting to the broader goal of developing industrial ecology as an integrated knowledge base inclusive of diverse disciplines, contributing to sustainable development. This paper…

Industrial Assessment of Creative Persons and Work Environments.

ERIC Educational Resources Information Center

Lifton, Peter D.

While personality psychology has a definite contribution to make to the study of industrial psychology and organizational behavior, it is a contribution with parameters, limitations, and areas of expertise which need to be better defined. Many industrial/organizational (I/O) psychologists are skeptical of the utility of personality measures for…

7 CFR 3570.62 - Use of grant funds.

Code of Federal Regulations, 2012 CFR

2012-01-01

...; (viii) Natural gas distribution systems; and (ix) Industrial park sites, but only to the extent of land... site. Funds may not be used in connection with industrial parks to finance on-site utility systems, or business and industrial buildings. (2) “Otherwise improve” includes, but is not limited to, the following...

7 CFR 3570.62 - Use of grant funds.

Code of Federal Regulations, 2011 CFR

2011-01-01

...; (viii) Natural gas distribution systems; and (ix) Industrial park sites, but only to the extent of land... site. Funds may not be used in connection with industrial parks to finance on-site utility systems, or business and industrial buildings. (2) “Otherwise improve” includes, but is not limited to, the following...

7 CFR 3570.62 - Use of grant funds.

Code of Federal Regulations, 2014 CFR

2014-01-01

...; (viii) Natural gas distribution systems; and (ix) Industrial park sites, but only to the extent of land... site. Funds may not be used in connection with industrial parks to finance on-site utility systems, or business and industrial buildings. (2) “Otherwise improve” includes, but is not limited to, the following...

7 CFR 3570.62 - Use of grant funds.

Code of Federal Regulations, 2013 CFR

2013-01-01

...; (viii) Natural gas distribution systems; and (ix) Industrial park sites, but only to the extent of land... site. Funds may not be used in connection with industrial parks to finance on-site utility systems, or business and industrial buildings. (2) “Otherwise improve” includes, but is not limited to, the following...

Integration of optical measurement methods with flight parameter measurement systems

NASA Astrophysics Data System (ADS)

Kopecki, Grzegorz; Rzucidlo, Pawel

2016-05-01

During the AIM (advanced in-flight measurement techniques) and AIM2 projects, innovative modern techniques were developed. The purpose of the AIM project was to develop optical measurement techniques dedicated for flight tests. Such methods give information about aircraft elements deformation, thermal loads or pressure distribution, etc. In AIM2 the development of optical methods for flight testing was continued. In particular, this project aimed at the development of methods that could be easily applied in flight tests in an industrial setting. Another equally important task was to guarantee the synchronization of the classical measuring system with cameras. The PW-6U glider used in flight tests was provided by the Rzeszów University of Technology. The glider had all the equipment necessary for testing the IPCT (image pattern correlation technique) and IRT (infrared thermometry) methods. Additionally, equipment adequate for the measurement of typical flight parameters, registration and analysis has been developed. This article describes the designed system, as well as presenting the system’s application during flight tests. Additionally, the results obtained in flight tests show certain limitations of the IRT method as applied.

The effects of the photomask on multiphase shift test monitors

NASA Astrophysics Data System (ADS)

McIntyre, Gregory; Neureuther, Andrew

2006-10-01

A series of chromeless multiple-phase shift lithographic test monitors have been previously introduced. This paper investigates various effects that impact the performance of these monitors, focusing primarily on PSM Polarimetry, a technique to monitor illumination polarization. The measurement sensitivities from a variety of scalar and rigorous electromagnetic simulations are compared to experimental results from three industrial quality multi-phase test reticles. This analysis enables the relative importance of the various effects to be identified and offers the industry unique insight into various issues associated with the photomask. First, the unavoidable electromagnetic interaction as light propagates through the multiple phase steps of the mask topography appears to account for about 10 to 20% of the lost sensitivity, when experimental results are compared to an ideal simulated case. The polarization dependence of this effect is analyzed, concluding that the 4-phase topography is more effective at manipulating TM polarization. Second, various difficulties in the fabrication of these complicated mask patterns are described and likely account for an additional 60-80% loss in sensitivity. Smaller effects are also described, associated with the photoresist, mask design and subtle differences in the proximity effect of TE and TM polarization of off-axis light at high numerical aperture. Finally, the question: "How practical is PSM polarimetry?" is considered. It is concluded that, despite many severe limiting factors, an accurately calibrated test reticle promises to monitor polarization in state-of-the-art lithography scanners to within about 2%.

Multiplicity: discussion points from the Statisticians in the Pharmaceutical Industry multiplicity expert group.

PubMed

Phillips, Alan; Fletcher, Chrissie; Atkinson, Gary; Channon, Eddie; Douiri, Abdel; Jaki, Thomas; Maca, Jeff; Morgan, David; Roger, James Henry; Terrill, Paul

2013-01-01

In May 2012, the Committee of Health and Medicinal Products issued a concept paper on the need to review the points to consider document on multiplicity issues in clinical trials. In preparation for the release of the updated guidance document, Statisticians in the Pharmaceutical Industry held a one-day expert group meeting in January 2013. Topics debated included multiplicity and the drug development process, the usefulness and limitations of newly developed strategies to deal with multiplicity, multiplicity issues arising from interim decisions and multiregional development, and the need for simultaneous confidence intervals (CIs) corresponding to multiple test procedures. A clear message from the meeting was that multiplicity adjustments need to be considered when the intention is to make a formal statement about efficacy or safety based on hypothesis tests. Statisticians have a key role when designing studies to assess what adjustment really means in the context of the research being conducted. More thought during the planning phase needs to be given to multiplicity adjustments for secondary endpoints given these are increasing in importance in differentiating products in the market place. No consensus was reached on the role of simultaneous CIs in the context of superiority trials. It was argued that unadjusted intervals should be employed as the primary purpose of the intervals is estimation, while the purpose of hypothesis testing is to formally establish an effect. The opposing view was that CIs should correspond to the test decision whenever possible. Copyright © 2013 John Wiley & Sons, Ltd.

A systematic review of the sleep, sleepiness, and performance implications of limited wake shift work schedules.

PubMed

Short, Michelle A; Agostini, Alexandra; Lushington, Kurt; Dorrian, Jillian

2015-09-01

The aim of this review was to identify which limited wake shift work schedules (LWSW) best promote sleep, alertness, and performance. LWSW are fixed work/rest cycles where the time-at-work does is ≤8 hours and there is >1 rest period per day, on average, for ≥2 consecutive days. These schedules are commonly used in safety-critical industries such as transport and maritime industries. Literature was sourced using PubMed, Embase, PsycInfo, Scopus, and Google Scholar databases. We identified 20 independent studies (plus a further 2 overlapping studies), including 5 laboratory and 17 field-based studies focused on maritime watch keepers, ship bridge officers, and long-haul train drivers. The measurement of outcome measures was varied, incorporating subjective and objective measures of sleep: sleep diaries (N=5), actigraphy (N=4), and polysomnography, (N=3); sleepiness: Karolinska Sleepiness Scale (N=5), visual analog scale (VAS) alertness (N=2) and author-derived measures (N=2); and performance: Psychomotor Vigilance Test (PVT) (N=5), Reaction Time or Vigilance tasks (N=4), Vector and Letter Cancellation Test (N=1), and subjective performance (N=2). Of the three primary rosters examined (6 hours-on/6 hours-off, 8 hours-on/8 hours-off and 4 hours-on/8 hours-off), the 4 hours-on/8 hours-off roster was associated with better sleep and lower levels of sleepiness. Individuals working 4 hours-on/8 hours-off rosters averaged 1 hour more sleep per night than those working 6 hours-on/6 hours-off and 1.3 hours more sleep than those working 8 hours-on/8 hours-off (P<0.01). More broadly, findings indicate that LWSW schedules were associated with better sleep and lower sleepines in the case of (i) shorter time-at-work, (ii) more frequent rest breaks, (iii) shifts that start and end at the same clock time every 24 hours, and (iv) work shifts commencing in the daytime (as opposed to night). The findings for performance remain incomplete due to the small number of studies containing a performance measure and the heterogeneity of performance measures within those that did. The literature supports the utility of LWSW in industries where individuals sleep at or near the workplace as they facilitate at least some sleep during the biological night and minimize deficits associated with time-on-shift with shorter shifts. Overall, the 4 hour-on/8 hour-off roster best promoted sleep and minimized sleepiness compared to other LWSW schedules. Nevertheless, and considering the safety-critical nature of industries which employ LWSW, the limited literature needs to be greatly expanded with specific focus on the consequences for performance and comparison to mainstream rosters.

Microchemical Plant in a Liquid Droplet: Plasmonic Liquid Marble for Sequential Reactions and Attomole Detection of Toxin at Microliter Scale.

PubMed

Han, Xuemei; Koh, Charlynn Sher Lin; Lee, Hiang Kwee; Chew, Wee Shern; Ling, Xing Yi

2017-11-15

Miniaturizing the continuous multistep operations of a factory into a microchemical plant offers a safe and cost-effective approach to promote high-throughput screening in drug development and enforcement of industrial/environmental safety. While particle-assembled microdroplets in the form of liquid marble are ideal as microchemical plant, these platforms are mainly restricted to single-step reactions and limited to ex situ reaction monitoring. Herein, we utilize plasmonic liquid marble (PLM), formed by encapsulating liquid droplet with Ag nanocubes, to address these issues and demonstrate it as an ideal microchemical plant to conduct reaction-and-detection sequences on-demand in a nondisruptive manner. Utilizing a two-step azo-dye formation as our model reaction, our microchemical plant allows rapid and efficient diazotization of nitroaniline to form diazonium nitrobenzene, followed by the azo coupling of this intermediate with target aromatic compound to yield azo-dye. These molecular events are tracked in situ via SERS measurement through the plasmonic shell and further verified with in silico investigation. Furthermore, we apply our microchemical plant for ultrasensitive SERS detection and quantification of bisphenol A (BPA) with detection limit down to 10 amol, which is 50 000-fold lower than the BPA safety limit. Together with the protections offered by plasmonic shell against external environments, these collective advantages empower PLM as a multifunctional microchemical plant to facilitate small-volume testing and optimization of processes relevant in industrial and research contexts.

Enhancement of seismic monitoring in hydrocarbon reservoirs

NASA Astrophysics Data System (ADS)

Caffagni, Enrico; Bokelmann, Götz

2017-04-01

Hydraulic Fracturing (HF) is widely considered as one of the most significant enablers of the successful exploitation of hydrocarbons in North America. Massive usage of HF is currently adopted to increase the permeability in shale and tight-sand deep reservoirs, despite the economical downturn. The exploitation success is less due to the subsurface geology, but in technology that improves exploration, production, and decision-making. This includes monitoring of the reservoir, which is vital. Indeed, the general mindset in the industry is to keep enhancing seismic monitoring. It allows understanding and tracking processes in hydrocarbon reservoirs, which serves two purposes, a) to optimize recovery, and b) to help minimize environmental impact. This raises the question of how monitoring, and especially seismic techniques could be more efficient. There is a pressing demand from seismic service industry to evolve quickly and to meet the oil-gas industry's changing needs. Nonetheless, the innovative monitoring techniques, to achieve the purpose, must enhance the characterization or the visualization of a superior-quality images of the reservoir. We discuss recent applications of seismic monitoring in hydrocarbon reservoirs, detailing potential enhancement and eventual limitations. The aim is to test the validity of these seismic monitoring techniques, qualitatively discuss their potential application to energy fields that are not only limited to HF. Outcomes from our investigation may benefit operators and regulators in case of future massive HF applications in Europe, as well. This work is part of the FracRisk consortium (www.fracrisk.eu), funded by the Horizon2020 research programme, whose aims is to help minimize the environmental footprint of the shale-gas exploration and exploitation.

Industrial Process Cooling Towers: National Emission Standards for Hazardous Air Pollutants

EPA Pesticide Factsheets

Standards limiting discharge of chromium compound air emissions from industrial process cooling towers (IPCT's). Includes rule history, Federal Registry citations, implementation information and additional resources.

77 FR 19612 - Certain Frozen Warmwater Shrimp from Brazil, India, and Thailand: Notice of Initiation of...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-02

.... Chemmeens (Regd) Cherukattu Industries \\2\\ Choice Canning Company Choice Trading Corporation Private Limited... Private Limited/Kader Investment and Trading Company Private Limited/Liberty Frozen Foods Pvt. Ltd... Limited Sun-Bio Technology Limited Suryamitra Exim (P) Ltd. Suvarna Rekha Exports Private Limited Suvarna...

NASA Presentation to TechAmerica G12 Committee

NASA Technical Reports Server (NTRS)

LaBel, Kenneth A.; Sampson, Michael J.

2011-01-01

This slide presentation reviews some of the actions that NASA is taking to address the issue of counterfeit electronic parts. While the emphasis is on electronic parts, the vision is broad enough to include materials and software. The effort includes coordination with other agencies, to identify and with the Government-Industry Data Exchange Program (GIDEP). An interim GIDEP Policy for suspected counterfeits was instituted. NASA's recommendation to the policy was for identification of the supplier and suggests allowing access to that information by government only. The issues with the General MIL specification, the testing requirements for radiation issues, the continuing development of Class Y standards for electronic equipment, status of package case isolation tests needed for 750 and 883,enhancement of 750 Internal Visual Inspection are reviewed. Further issues with consistent ESD control conditions across commodities, test methods, humidity limits, etc are briefly reviewed. The cost benefit analysis of film versus Real time radiography are also reviewed.

Cytotoxicity assessment of antibiofouling compounds and by-products in marine bivalve cell cultures.

PubMed

Domart-Coulon, I; Auzoux-Bordenave, S; Doumenc, D; Khalanski, M

2000-06-01

Short-term primary cell cultures were derived from adult marine bivalve tissues: the heart of oyster Crassostrea gigas and the gill of clam Ruditapes decussatus. These cultures were used as experimental in vitro models to assess the acute cytotoxicity of an organic molluscicide, Mexel-432, used in antibiofouling treatments in industrial cooling water systems. A microplate cell viability assay, based on the enzymatic reduction of tetrazolium dye (MTT) in living bivalve cells, was adapted to test the cytotoxicity of this compound: in both in vitro models, toxicity thresholds of Mexel-432 were compared to those determined in vivo with classic acute toxicity tests. The clam gill cell model was also used to assess the cytotoxicity of by-products of chlorination, a major strategy of biofouling control in the marine environment. The applications and limits of these new in vitro models for monitoring aquatic pollutants were discussed, in reference with the standardized Microtox test.

Performance testing of 3D point cloud software

NASA Astrophysics Data System (ADS)

Varela-González, M.; González-Jorge, H.; Riveiro, B.; Arias, P.

2013-10-01

LiDAR systems are being used widely in recent years for many applications in the engineering field: civil engineering, cultural heritage, mining, industry and environmental engineering. One of the most important limitations of this technology is the large computational requirements involved in data processing, especially for large mobile LiDAR datasets. Several software solutions for data managing are available in the market, including open source suites, however, users often unknown methodologies to verify their performance properly. In this work a methodology for LiDAR software performance testing is presented and four different suites are studied: QT Modeler, VR Mesh, AutoCAD 3D Civil and the Point Cloud Library running in software developed at the University of Vigo (SITEGI). The software based on the Point Cloud Library shows better results in the loading time of the point clouds and CPU usage. However, it is not as strong as commercial suites in working set and commit size tests.

Clay Improvement with Burned Olive Waste Ash

PubMed Central

Mutman, Utkan

2013-01-01

Olive oil is concentrated in the Mediterranean basin countries. Since the olive oil industries are incriminated for a high quantity of pollution, it has become imperative to solve this problem by developing optimized systems for the treatment of olive oil wastes. This study proposes a solution to the problem. Burned olive waste ash is evaluated for using it as clay stabilizer. In a laboratory, bentonite clay is used to improve olive waste ash. Before the laboratory, the olive waste is burned at 550°C in the high temperature oven. The burned olive waste ash was added to bentonite clay with increasing 1% by weight from 1% to 10%. The study consisted of the following tests on samples treated with burned olive waste ash: Atterberg Limits, Standard Proctor Density, and Unconfined Compressive Strength Tests. The test results show promise for this material to be used as stabilizer and to solve many of the problems associated with its accumulation. PMID:23766671

A Portable Electronic Nose For Hydrazine and Monomethyl Hydrazine Detection

NASA Technical Reports Server (NTRS)

Young, Rebecca C.; Linnell, Bruce R.; Peterson, Barbara V.; Brooks, Kathy B.; Griffin, Tim P.

2004-01-01

The Space Program and military use large quantities Hydrazine (Hz) and monomethyl hydrazine (MMI-I) as rocket propellant. These substances are very toxic and are suspected human carcinogens. The American Conference of Governmental Industrial Hygienist set the threshold limit value to be 10 parts per billion (ppb). Current off-the-shelf portable instruments require 10 to 20 minutes of exposure to detect 10 ppb concentration. This shortcofriing is not acceptable for many operations. A new prototype instrument using a gas sensor array and pattern recognition software technology (i.e., an electronic nose) has demonstrated the ability to identify either Hz or MM}{ and quantify their concentrations at 10 parts per billion in 90 seconds. This paper describes the design of the portable electronic nose (e-nose) instrument, test equipment setup, test protocol, pattern recognition algorithm, concentration estimation method, and laboratory test results.

Design, Fabrication, and Testing of an Auxiliary Cooling System for Jet Engines

NASA Technical Reports Server (NTRS)

Leamy, Kevin; Griffiths, Jim; Andersen, Paul; Joco, Fidel; Laski, Mark; Balser, Jeffrey (Technical Monitor)

2001-01-01

This report summarizes the technical effort of the Active Cooling for Enhanced Performance (ACEP) program sponsored by NASA. It covers the design, fabrication, and integrated systems testing of a jet engine auxiliary cooling system, or turbocooler, that significantly extends the use of conventional jet fuel as a heat sink. The turbocooler is designed to provide subcooled cooling air to the engine exhaust nozzle system or engine hot section. The turbocooler consists of three primary components: (1) a high-temperature air cycle machine driven by engine compressor discharge air, (2) a fuel/ air heat exchanger that transfers energy from the hot air to the fuel and uses a coating to mitigate fuel deposits, and (3) a high-temperature fuel injection system. The details of the turbocooler component designs and results of the integrated systems testing are documented. Industry Version-Data and information deemed subject to Limited Rights restrictions are omitted from this document.

Alkali deposits found in biomass power plants: A preliminary investigation of their extent and nature. Volume 1

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miles, T.R.; Miles, T.R. Jr.; Baxter, L.L.

1995-04-15

Alkali in the ash of annual crop biomass fuels creates serious fouling and slagging in conventional boilers. Even with the use of sorbents and other additives, power plants can only fire limited amounts of these fuels in combination with wood. The National Renewable Energy Laboratory (NREL), US Department of Energy, and the biomass power industry carried out eight full-scale firing tests and several laboratory experiments to study the nature and occurrence of deposits with the goal of increasing the quantities of these biofuels that can be used. This report describes the results of the laboratory and power plant tests thatmore » included: tracking and analyzing fuels and deposits by various methods; recording operating conditions; and extensive laboratory testing. The paper describes the occurrence of deposits, fuel and deposit analyses, boiler design and operation, fouling and slagging indicators, and recommendations. 37 refs., 41 figs., 17 tabs.« less

Evaluation of aftermarket LPG conversion kits in light-duty vehicle applications. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bass, E A

1993-06-01

SwRI was contracted by NREL to evaluate three LPG conversion kits on a Chevrolet Lumina. The objective of the project was to measure the Federal Test Procedure (FTP) emissions and fuel economy of these kits, and compare their performance to gasoline-fueled operation and to each other. Varying LPG fuel blends allowed a preliminary look at the potential for fuel system disturbance. The project required kit installation and adjustment according to manufacturer`s instructions. A limited amount of trouble diagnosis was also performed on the fuel systems. A simultaneous contract from the Texas Railroad Commission, in cooperation with NREL, provided funds formore » additional testing with market fuels (HD5 propane and industry average gasoline) and hydrocarbon (HC) emissions speciation to determine the ozone-forming potential of LPG HC emissions. This report documents the procurement, installation, and testing of these LPG conversion kits.« less

A flowthrough fecundity test with Nitocra spinipes (Harpacticoidea Crustacea) for aquatic toxicity.

PubMed

Bengtsson, B E; Bergström, B

1987-12-01

A sublethal flowthrough fecundity test with the euryhaline harpacticoid copepod Nitocra spinipes has been developed as a complement to the acute toxicity test (for 48 or 96 hr LC50) with the same species (B-E. Bengtsson, 1981, Mar. Pollut. Biol. 9,238-241). Bacterial suspension as feed and test water are continuously fed by a peristaltic pump to the system. Newly fertilized females with ovigerous bands are harvested from laboratory cultures and put into the test vessels at the start of the experiment. They are then exposed to a series of concentrations of chemicals or industrial effluents for 13 days. The amount of live offspring (metanauplia and copepodids) are recorded and an EC50 for fecundity is calculated. The report gives a detailed technical description of the test system and presents the results from 11 tests with pure chemicals (Zn, Cd, As, and pentachlorophenate) and six industrial effluents (pulp industry, textile industry, and refinery) in salinities ranging from 3 to 25%.

Electroacoustic dewatering of food and other suspensions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kim, B.C.; Zelinski, M.S.; Criner, C.L.

1989-05-31

The food processing industry is a large user of energy for evaporative drying due to limited effectiveness of conventional mechanical dewatering machines. Battelle's Electroacoustic Dewatering (EAD) process improves the performance of mechanical dewatering machines by superimposing electric and ultrasonic fields. A two phase development program to demonstrate the benefits of EAD was carried out in cooperation with the food processing industry, the National Food Processors Association (NFPA) and two equipment vendors. In Phase I, laboratory scale studies were carried out on a variety of food suspensions. The process was scaled up to small commercial scale in Phase II. The technicalmore » feasibility of EAD for a variety of food materials, without adversely affecting the food properties, was successfully demonstrated during this phase, which is the subject of this report. Two Process Research Units (PRUs) were designed and built through joint efforts between Battelle and two equipment vendors. A 0.5-meter wide belt press was tested on apple mash, corn fiber, and corn gluten at sites provided by two food processors. A high speed citrus juice finisher (a hybrid form of screw press and centrifuge) was tested on orange pulp. These tests were carried out jointly by Battelle, equipment vendors, NFPA, and food processors. The apple and citrus juice products were analyzed by food processors and NFPA. 26 figs., 30 tabs.« less

Purification of Houttuynia cordata Thunb. Essential Oil Using Macroporous Resin Followed by Microemulsion Encapsulation to Improve Its Safety and Antiviral Activity.

PubMed

Pang, Jianmei; Dong, Wujun; Li, Yuhuan; Xia, Xuejun; Liu, Zhihua; Hao, Huazhen; Jiang, Lingmin; Liu, Yuling

2017-02-15

Essential oil extracted from Houttuynia cordata Thunb. ( H. cordata ) is widely used in traditional Chinese medicine due to its excellent biological activities. However, impurities and deficient preparations of the essential oil limit its safety and effectiveness. Herein, we proposed a strategy to prepare H. cordata essential oil (HEO) safely and effectively by combining the solvent extraction and the macroporous resin purification flexibly, and then encapsulating it using microemulsion. The extraction and purification process were optimized by orthogonal experimental design and adsorption-desorption tests, respectively. The average houttuynin content in pure HEO was then validated at 44.3% ± 2.01%, which presented a great potential for industrial application. Subsequently, pure HEO-loaded microemulsion was prepared by high-pressure homogenization and was then fully characterized. Results showed that the pure HEO-loaded microemulsion was successfully prepared with an average particle size of 179.1 nm and a high encapsulation rate of 94.7%. Furthermore, safety evaluation tests and in vitro antiviral testing indicated that the safety and activity of HEO were significantly improved after purification using D101 resin and were further improved by microemulsion encapsulation. These results demonstrated that the purification of HEO by macroporous resin followed by microemulsion encapsulation would be a promising approach for industrial application of HEO for the antiviral therapies.

Economic analysis of the final effluent limitations, new source performance standards and pretreatment standards for the steam electric power industry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

This report presents the economic analysis of final effluent limitation guidelines, New Source Performance Standards, and pretreatment standards being promulgated for the steam-electric power plant point source category. It describes the costs of the final regulations, assesses the effects of these costs on the electric utility industry, and examines the cost-effectiveness of the regulations.

Environmental assessment for the proposed effluent limitations guidelines, pretreatment standards, and new source performance standards for the centralized waste treatment industry

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1998-12-01

This report assesses the water quality related benefits that would be expected if the US Environmental Protection Agency (EPA) adopts the proposed effluent limitations, guidelines and pretreatment standards for the Centralized Waste Treatment (CWT) Industry. EPA estimates that under baseline conditions 205 CWT facilities discharge approximately 5.22 million lbs/year of metal and organic pollutants.

Cost-effectiveness research in cancer therapy: a systematic review of literature trends, methods and the influence of funding.

PubMed

Al-Badriyeh, Daoud; Alameri, Marwah; Al-Okka, Randa

2017-01-27

To perform a first-time analysis of the cost-effectiveness (CE) literature on chemotherapies, of all types, in cancer, in terms of trends and change over time, including the influence of industry funding. Systematic review. A wide range of cancer-related research settings within healthcare, including health systems, hospitals and medical centres. All literature comparative CE research of drug-based cancer therapies in the period 1986 to 2015. Primary outcomes are the literature trends in relation to journal subject category, authorship, research design, data sources, funds and consultation involvement. An additional outcome measure is the association between industry funding and study outcomes. Descriptive statistics and the χ 2 , Fisher exact or Somer's D tests were used to perform non-parametric statistics, with a p value of <0.05 as the statistical significance measure. Total 574 publications were analysed. The drug-related CE literature expands over time, with increased publishing in the healthcare sciences and services journal subject category (p<0.001). The retrospective data collection in studies increased over time (p<0.001). The usage of prospective data, however, has been decreasing (p<0.001) in relation to randomised clinical trials (RCTs), but is unchanging for non-RCT studies. The industry-sponsored CE studies have especially been increasing (p<0.001), in contrast to those sponsored by other sources. While paid consultation involvement grew throughout the years, the declaration of funding for this is relatively limited. Importantly, there is evidence that industry funding is associated with favourable result to the sponsor (p<0.001). This analysis demonstrates clear trends in how the CE cancer research is presented to the practicing community, including in relation to journals, study designs, authorship and consultation, together with increased financial sponsorship by pharmaceutical industries, which may be more influencing study outcomes than other funding sources. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Developing a new production host from a blueprint: Bacillus pumilus as an industrial enzyme producer.

PubMed

Küppers, Tobias; Steffen, Victoria; Hellmuth, Hendrik; O'Connell, Timothy; Bongaerts, Johannes; Maurer, Karl-Heinz; Wiechert, Wolfgang

2014-03-24

Since volatile and rising cost factors such as energy, raw materials and market competitiveness have a significant impact on the economic efficiency of biotechnological bulk productions, industrial processes need to be steadily improved and optimized. Thereby the current production hosts can undergo various limitations. To overcome those limitations and in addition increase the diversity of available production hosts for future applications, we suggest a Production Strain Blueprinting (PSB) strategy to develop new production systems in a reduced time lapse in contrast to a development from scratch.To demonstrate this approach, Bacillus pumilus has been developed as an alternative expression platform for the production of alkaline enzymes in reference to the established industrial production host Bacillus licheniformis. To develop the selected B. pumilus as an alternative production host the suggested PSB strategy was applied proceeding in the following steps (dedicated product titers are scaled to the protease titer of Henkel's industrial production strain B. licheniformis at lab scale): Introduction of a protease production plasmid, adaptation of a protease production process (44%), process optimization (92%) and expression optimization (114%). To further evaluate the production capability of the developed B. pumilus platform, the target protease was substituted by an α-amylase. The expression performance was tested under the previously optimized protease process conditions and under subsequently adapted process conditions resulting in a maximum product titer of 65% in reference to B. licheniformis protease titer. In this contribution the applied PSB strategy performed very well for the development of B. pumilus as an alternative production strain. Thereby the engineered B. pumilus expression platform even exceeded the protease titer of the industrial production host B. licheniformis by 14%. This result exhibits a remarkable potential of B. pumilus to be the basis for a next generation production host, since the strain has still a large potential for further genetic engineering. The final amylase titer of 65% in reference to B. licheniformis protease titer suggests that the developed B. pumilus expression platform is also suitable for an efficient production of non-proteolytic enzymes reaching a final titer of several grams per liter without complex process modifications.

MDI Biological Laboratory Arsenic Summit: Approaches to Limiting Human Exposure to Arsenic

PubMed Central

Stanton, Bruce A.

2015-01-01

This report is the outcome of the meeting: “Environmental and Human Health Consequences of Arsenic”, held at the MDI Biological Laboratory in Salisbury Cove, Maine, August 13–15, 2014. Human exposure to arsenic represents a significant health problem worldwide that requires immediate attention according to the World Health Organization (WHO). One billion people are exposed to arsenic in food and more than 200 million people ingest arsenic via drinking water at concentrations greater than international standards. Although the U.S. Environmental Protection Agency (EPA) has set a limit of 10 micrograms per liter (10 μg/L) in public water supplies and the WHO has recommended an upper limit of 10 μg/L, recent studies indicate that these limits are not protective enough. In addition, there are currently few standards for arsenic in food. Those who participated in the Summit support citizens, scientists, policymakers, industry and educators at the local, state, national and international levels to: (1) Establish science-based evidence for setting standards at the local, state, national, and global levels for arsenic in water and food; (2) Work with government agencies to set regulations for arsenic in water and food, to establish and strengthen non-regulatory programs, and to strengthen collaboration among government agencies, NGOs, academia, the private sector, industry and others; (3) Develop novel and cost-effective technologies for identification and reduction of exposure to arsenic in water; (4) Develop novel and cost-effective approaches to reduce arsenic exposure in juice, rice, and other relevant foods, and (5) Develop an Arsenic Education Plan to guide the development of science curricula as well as community outreach and education programs that serve to inform students and consumers about arsenic exposure and engage them in well water testing and development of remediation strategies. PMID:26231509

MDI Biological Laboratory Arsenic Summit: Approaches to Limiting Human Exposure to Arsenic.

PubMed

Stanton, Bruce A; Caldwell, Kathleen; Congdon, Clare Bates; Disney, Jane; Donahue, Maria; Ferguson, Elizabeth; Flemings, Elsie; Golden, Meredith; Guerinot, Mary Lou; Highman, Jay; James, Karen; Kim, Carol; Lantz, R Clark; Marvinney, Robert G; Mayer, Greg; Miller, David; Navas-Acien, Ana; Nordstrom, D Kirk; Postema, Sonia; Rardin, Laurie; Rosen, Barry; SenGupta, Arup; Shaw, Joseph; Stanton, Elizabeth; Susca, Paul

2015-09-01

This report is the outcome of the meeting "Environmental and Human Health Consequences of Arsenic" held at the MDI Biological Laboratory in Salisbury Cove, Maine, August 13-15, 2014. Human exposure to arsenic represents a significant health problem worldwide that requires immediate attention according to the World Health Organization (WHO). One billion people are exposed to arsenic in food, and more than 200 million people ingest arsenic via drinking water at concentrations greater than international standards. Although the US Environmental Protection Agency (EPA) has set a limit of 10 μg/L in public water supplies and the WHO has recommended an upper limit of 10 μg/L, recent studies indicate that these limits are not protective enough. In addition, there are currently few standards for arsenic in food. Those who participated in the Summit support citizens, scientists, policymakers, industry, and educators at the local, state, national, and international levels to (1) establish science-based evidence for setting standards at the local, state, national, and global levels for arsenic in water and food; (2) work with government agencies to set regulations for arsenic in water and food, to establish and strengthen non-regulatory programs, and to strengthen collaboration among government agencies, NGOs, academia, the private sector, industry, and others; (3) develop novel and cost-effective technologies for identification and reduction of exposure to arsenic in water; (4) develop novel and cost-effective approaches to reduce arsenic exposure in juice, rice, and other relevant foods; and (5) develop an Arsenic Education Plan to guide the development of science curricula as well as community outreach and education programs that serve to inform students and consumers about arsenic exposure and engage them in well water testing and development of remediation strategies.

Evaluation of Surface Roughness by Image Processing of a Shot-Peened, TIG-Welded Aluminum 6061-T6 Alloy: An Experimental Case Study

PubMed Central

Rawashdeh, Nathir A.

2018-01-01

Visual inspection through image processing of welding and shot-peened surfaces is necessary to overcome equipment limitations, avoid measurement errors, and accelerate processing to gain certain surface properties such as surface roughness. Therefore, it is important to design an algorithm to quantify surface properties, which enables us to overcome the aforementioned limitations. In this study, a proposed systematic algorithm is utilized to generate and compare the surface roughness of Tungsten Inert Gas (TIG) welded aluminum 6061-T6 alloy treated by two levels of shot-peening, high-intensity and low-intensity. This project is industrial in nature, and the proposed solution was originally requested by local industry to overcome equipment capabilities and limitations. In particular, surface roughness measurements are usually only possible on flat surfaces but not on other areas treated by shot-peening after welding, as in the heat-affected zone and weld beads. Therefore, those critical areas are outside of the measurement limitations. Using the proposed technique, the surface roughness measurements were possible to obtain for weld beads, high-intensity and low-intensity shot-peened surfaces. In addition, a 3D surface topography was generated and dimple size distributions were calculated for the three tested scenarios: control sample (TIG-welded only), high-intensity shot-peened, and low-intensity shot-peened TIG-welded Al6065-T6 samples. Finally, cross-sectional hardness profiles were measured for the three scenarios; in all scenarios, lower hardness measurements were obtained compared to the base metal alloy in the heat-affected zone and in the weld beads even after shot-peening treatments. PMID:29748520

Final Report: Laboratory Development of a High Capacity Gas-Fired Paper Dryer

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yaroslav Chudnovsky; Aleksandr Kozlov; Lester Sherrow

2005-09-30

Paper drying is the most energy-intensive and temperature-critical aspect of papermaking. It is estimated that about 67% of the total energy required in papermaking is used to dry paper. The conventional drying method uses a series of steam-heated metal cylinders that are required to meet ASME codes for pressure vessels, which limits the steam pressure to about 160 psig. Consequently, the shell temperature and the drying capacity are also limited. Gas Technology Institute together with Boise Paper Solutions, Groupe Laperrier and Verreault (GL&V) USA Inc., Flynn Burner Corporation and with funding support from the U.S. Department of Energy, U.S. naturalmore » gas industry, and Gas Research Institute is developing a high efficiency gas-fired paper dryer based on a combination of a ribbon burner and advanced heat transfer enhancement technique. The Gas-Fired Paper Dryer (GFPD) is a high-efficiency alternative to conventional steam-heated drying drums that typically operate at surface temperatures in the 300 deg F range. The new approach was evaluated in laboratory and pilot-scale testing at the Western Michigan University Paper Pilot Plant. Drum surface temperatures of more than 400 deg F were reached with linerboard (basis weight 126 lb/3000 ft2) production and resulted in a 4-5 times increase in drying rate over a conventional steam-heated drying drum. Successful GFPD development and commercialization will provide large energy savings to the paper industry and increase paper production rates from dryer-limited (space- or steam-limited) paper machines by an estimated 10 to 20%, resulting in significant capital costs savings for both retrofits and new capacity.« less

Laboratory Development of A High Capacity Gas-Fired paper Dryer

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chudnovsky, Yaroslav; Kozlov, Aleksandr; Sherrow, Lester

2005-09-30

Paper drying is the most energy-intensive and temperature-critical aspect of papermaking. It is estimated that about 67% of the total energy required in papermaking is used to dry paper. The conventional drying method uses a series of steam-heated metal cylinders that are required to meet ASME codes for pressure vessels, which limits the steam pressure to about 160 psig. Consequently, the shell temperature and the drying capacity are also limited. Gas Technology Institute together with Boise Paper Solutions, Groupe Laparrier and Verreault (GL&V) USA Inc., Flynn Burner Corporation and with funding support from the U.S. Department of Energy, U.S. naturalmore » gas industry, and Gas Research Institute is developing a high efficiency gas-fired paper dryer based on a combination of a ribbon burner and advanced heat transfer enhancement technique. The Gas-Fired Paper Dryer (GFPD) is a high-efficiency alternative to conventional steam-heated drying drums that typically operate at surface temperatures in the 300ºF range. The new approach was evaluated in laboratory and pilot-scale testing at the Western Michigan University Paper Pilot Plant. Drum surface temperatures of more than 400ºF were reached with linerboard (basis weight 126 lb/3000 ft2) production and resulted in a 4-5 times increase in drying rate over a conventional steam-heated drying drum. Successful GFPD development and commercialization will provide large energy savings to the paper industry and increase paper production rates from dryer-limited (space- or steam-limited) paper machines by an estimated 10 to 20%, resulting in significant capital costs savings for both retrofits and new capacity.« less

Evaluation of Surface Roughness by Image Processing of a Shot-Peened, TIG-Welded Aluminum 6061-T6 Alloy: An Experimental Case Study.

PubMed

Atieh, Anas M; Rawashdeh, Nathir A; AlHazaa, Abdulaziz N

2018-05-10

Visual inspection through image processing of welding and shot-peened surfaces is necessary to overcome equipment limitations, avoid measurement errors, and accelerate processing to gain certain surface properties such as surface roughness. Therefore, it is important to design an algorithm to quantify surface properties, which enables us to overcome the aforementioned limitations. In this study, a proposed systematic algorithm is utilized to generate and compare the surface roughness of Tungsten Inert Gas (TIG) welded aluminum 6061-T6 alloy treated by two levels of shot-peening, high-intensity and low-intensity. This project is industrial in nature, and the proposed solution was originally requested by local industry to overcome equipment capabilities and limitations. In particular, surface roughness measurements are usually only possible on flat surfaces but not on other areas treated by shot-peening after welding, as in the heat-affected zone and weld beads. Therefore, those critical areas are outside of the measurement limitations. Using the proposed technique, the surface roughness measurements were possible to obtain for weld beads, high-intensity and low-intensity shot-peened surfaces. In addition, a 3D surface topography was generated and dimple size distributions were calculated for the three tested scenarios: control sample (TIG-welded only), high-intensity shot-peened, and low-intensity shot-peened TIG-welded Al6065-T6 samples. Finally, cross-sectional hardness profiles were measured for the three scenarios; in all scenarios, lower hardness measurements were obtained compared to the base metal alloy in the heat-affected zone and in the weld beads even after shot-peening treatments.

Electron beam accelerator: A new tool for environmental preservation in Malaysia

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hashim, Siti Aiasah; Bakar, Khomsaton Abu; Othman, Mohd Nahar

2012-09-26

Electron beam accelerators are widely used for industrial applications such as surface curing, crosslinking of wires and cables and sterilization/ decontamination of pharmaceutical products. The energy of the electron beam determines the type of applications. This is due to the penetration power of the electron that is limited by the energy. In the last decade, more work has been carried out to utilize the energetic electron for remediation of environmental pollution. For this purposes, 1 MeV electron beam accelerator is sufficient to treat wastewater from textile industry and flue gases from fossil fuel combustions. In Nuclear Malaysia, a variable energymore » Cockroft Walton type accelerator has been utilized to initiate investigations in these two areas. An electron beam flue gas treatment test rig was built to treat emission from diesel combustion, where it was found that using EB parameters of 1MeV and 12mA can successfully remove at least 80% of nitric oxide in the emission. Wastewater from textile industries was treated using combination of biological treatment and EB. The initial findings indicated that the quality of water had improved based on the COD{sub Cr}, BOD{sub 5} indicators.« less

A generalized volumetric dispersion model for a class of two-phase separation/reaction: finite difference solutions

NASA Astrophysics Data System (ADS)

Siripatana, Chairat; Thongpan, Hathaikarn; Promraksa, Arwut

2017-03-01

This article explores a volumetric approach in formulating differential equations for a class of engineering flow problems involving component transfer within or between two phases. In contrast to conventional formulation which is based on linear velocities, this work proposed a slightly different approach based on volumetric flow-rate which is essentially constant in many industrial processes. In effect, many multi-dimensional flow problems found industrially can be simplified into multi-component or multi-phase but one-dimensional flow problems. The formulation is largely generic, covering counter-current, concurrent or batch, fixed and fluidized bed arrangement. It was also intended to use for start-up, shut-down, control and steady state simulation. Since many realistic and industrial operation are dynamic with variable velocity and porosity in relation to position, analytical solutions are rare and limited to only very simple cases. Thus we also provide a numerical solution using Crank-Nicolson finite difference scheme. This solution is inherently stable as tested against a few cases published in the literature. However, it is anticipated that, for unconfined flow or non-constant flow-rate, traditional formulation should be applied.

Electron beam accelerator: A new tool for environmental preservation in Malaysia

NASA Astrophysics Data System (ADS)

Hashim, Siti Aiasah; Bakar, Khomsaton Abu; Othman, Mohd Nahar

2012-09-01

Electron beam accelerators are widely used for industrial applications such as surface curing, crosslinking of wires and cables and sterilization/ decontamination of pharmaceutical products. The energy of the electron beam determines the type of applications. This is due to the penetration power of the electron that is limited by the energy. In the last decade, more work has been carried out to utilize the energetic electron for remediation of environmental pollution. For this purposes, 1 MeV electron beam accelerator is sufficient to treat wastewater from textile industry and flue gases from fossil fuel combustions. In Nuclear Malaysia, a variable energy Cockroft Walton type accelerator has been utilized to initiate investigations in these two areas. An electron beam flue gas treatment test rig was built to treat emission from diesel combustion, where it was found that using EB parameters of 1MeV and 12mA can successfully remove at least 80% of nitric oxide in the emission. Wastewater from textile industries was treated using combination of biological treatment and EB. The initial findings indicated that the quality of water had improved based on the CODCr, BOD5 indicators.

Toxic emissions during co-combustion of biomass-waste wood-lignite blends in an industrial boiler.

PubMed

Samaras, P; Skodras, G; Sakellaropoulos, G P; Blumenstock, M; Schramm, K W; Kettrup, A

2001-01-01

The objectives of this work were to study the PCDD/F emissions during the co-combustion of waste wood/coal co-combustion in an industrial boiler and to determine the relation of the toxic emissions to the fuel properties. Co-combustion experiments were performed in a 13.8 MWthermal industrial moving grate combustor. The fuels which were examined in this study included Greek lignite, natural uncontaminated wood, power poles and medium density fibers (MDFs) which were by-products of the plant production process. Fuel blends were prepared by mixing single components in various concentrations. PCDD/F emissions were collected during experimental runs and were analyzed according to standard methods. Low PCDD/F emissions were obtained during the co-combustion tests, lower than the limit value of 0.1 ng TEQ/Nm3. The lowest values were observed during the combustion of fuel blends containing MDF, possibly due to the inhibitory action of some of the N-containing MDF ingredients, such as urea. No direct correlation was found between the PCDD/F and the copper emissions, while examination of the PCDD/F homologue patterns revealed the predominance of the lower chlorinated isomers over the higher ones.

A compact LIBS system for industrial applications

NASA Astrophysics Data System (ADS)

Noharet, B.; Sterner, C.; Irebo, T.; Gurell, J.; Bengtson, A.; Vainik, R.; Karlsson, H.; Illy, E.

2015-03-01

In recent years, laser-induced breakdown spectroscopy (LIBS) has been established as a promising analytical tool for online chemical analysis. The emitted light spectrum is analyzed for instantaneous determination of the elemental composition of the sample, enabling on-line classification of materials. Two major strengths of the technique are the possibilities to perform both fast and remote chemical analysis to determine the elemental composition of the samples under test. In order to reduce the size of LIBS systems, the use of a compact Q-switched diode-pumped solid-state laser (DPSSL) in a LIBS system is evaluated for the industrial sorting of aluminium alloys. The DPSSL, which delivers 150μJ pulses of high beam quality at more than 7KHz repetition rate, provides irradiance on the target that is appropriate for LIBS measurements. The experimental results indicate that alloy classification and quantitative analysis are possible on scrap aluminium samples placed 50 cm apart from the focusing and collecting lenses, without sample preparation. Similar calibration curves and limits of detection are obtained for traditional high-energy low-frequency flashlamp-pumped and low-energy high-frequency diode-pumped lasers, showing the applicability of compact diode-pumped lasers for industrial LIBS applications.

Mercury removal in utility wet scrubber using a chelating agent

DOEpatents

Amrhein, Gerald T.

2001-01-01

A method for capturing and reducing the mercury content of an industrial flue gas such as that produced in the combustion of a fossil fuel or solid waste adds a chelating agent, such as ethylenediaminetetraacetic acid (EDTA) or other similar compounds like HEDTA, DTPA and/or NTA, to the flue gas being scrubbed in a wet scrubber used in the industrial process. The chelating agent prevents the reduction of oxidized mercury to elemental mercury, thereby increasing the mercury removal efficiency of the wet scrubber. Exemplary tests on inlet and outlet mercury concentration in an industrial flue gas were performed without and with EDTA addition. Without EDTA, mercury removal totaled 42%. With EDTA, mercury removal increased to 71%. The invention may be readily adapted to known wet scrubber systems and it specifically provides for the removal of unwanted mercury both by supplying S.sup.2- ions to convert Hg.sup.2+ ions into mercuric sulfide (HgS) and by supplying a chelating agent to sequester other ions, including but not limited to Fe.sup.2+ ions, which could otherwise induce the unwanted reduction of Hg.sup.2+ to the form, Hg.sup.0.

Support services for the automative gas turbine project

NASA Technical Reports Server (NTRS)

Golec, T. (Editor)

1981-01-01

Support was provided to DOE and NASA in their efforts to inform industry, the public, and Government on the benefits and purpose of the gas turbine programs through demonstrations and exhibits. Tasks were carried out for maintenance, repair, and retrofit of the experimental gas turbine engines being used by NASA in their gas turbine technology programs and in program demonstrations. Limited support testing was conducted at Chrysler in which data were generated on air bearing rotor shaft dynamics, heavy duty variable sheave rubber belts, high temperature elastomer regenerator drive mounting and graphite regenerator seal friction characteristics.

Interfacing the Controllogics PLC over Ethernet/IP.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kasemir, K. U.; Dalesio, L. R.

2001-01-01

The Allen-Bradley ControlLogix [1] line of programmable logic controllers (PLCs) offers several interfaces: Ethernet, ControlNet, DeviceNet, RS-232 and others. The ControlLogix Ethernet interface module 1756-ENET uses EtherNet/IP, the ControlNet protocol [2], encapsulated in Ethernet packages, with specific service codes [3]. A driver for the Experimental Physics and Industrial Control System (EPICS) has been developed that utilizes this EtherNet/IP protocol for controllers running the vxWorks RTOS as well as a Win32 and Unix/Linux test program. Features, performance and limitations of this interface are presented.

27 CFR 6.4 - Jurisdictional limits.

Code of Federal Regulations, 2010 CFR

2010-04-01

... regulations in this part apply where: (1) The industry member induces a retailer to purchase distilled spirits, wine, or malt beverages from such industry member to the exclusion in whole or in part of products sold... inducement is made in the course of interstate or foreign commerce; or (ii) The industry member engages in...

12 CFR 225.52 - Limitation on overdrafts.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Bank to a nonbank bank or industrial bank pursuant to the provisions of the Board's Regulation A (12 CFR part 201). (4) Industrial bank means an institution as defined in section 2(c)(2)(H) of the BHC... occurs whenever the Federal Reserve Bank, nonbank bank, or industrial bank holding an account posts a...

Industry-School Partnerships: Boundary Crossing to Enable School to Work Transitions

ERIC Educational Resources Information Center

Flynn, Matthew C.; Pillay, Hitendra; Watters, Jim

2016-01-01

Industry-school partnerships (ISPs) are increasingly being recognised as a new way of providing vocational education opportunities particularly in industries where there are skills shortages. However, there is limited research investigating their impact on school to work transitions. This paper reports on a government-led ISP, the Gateway to…

The Uses and Limits of Social Reinforcement and Industriousness for Learning to Read. Technical Report #60.

ERIC Educational Resources Information Center

Tharp, Roland G.; Gallimore, Ronald

This report describes a study of the use of social reinforcement to increase the industriousness, and subsequently the reading competence, of children in the kindergarten through third grade classes of the Kamehameha Early Education Program (KEEP) demonstration school. Teacher behaviors, pupil industriousness, and pupil reading performance were…

78 FR 49255 - Foreign-Trade Zone 158-Vicksburg/Jackson, Mississippi; Authorization of Production Activity...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-13

... Furniture Industries, Inc. (Upholstered Furniture); Belden, Saltillo, and Verona, Mississippi On February 28... proposed production activity to the Foreign-Trade Zones (FTZ) Board on behalf of Lane Furniture Industries... foreign status (19 CFR 146.42) is limited to 6.5 million square yards. 2. Lane Furniture Industries, Inc...

Closing the door on pharma? A national survey of family medicine residencies regarding industry interactions.

PubMed

Fugh-Berman, Adriane; Brown, Steven R; Trippett, Rachel; Bell, Alicia M; Clark, Paige; Fleg, Anthony; Siwek, Jay

2011-05-01

To assess the extent and type of interactions U.S. family medicine residencies permit industry to have with medical students and residents. In 2008, the authors e-mailed a four-question survey to residency directors or coordinators at all 460 accredited U.S. family medicine residencies concerning the types of industry support and interaction permitted. The authors conducted quantitative and qualitative analyses of survey responses and written comments. Residencies that did not permit any industry food, gifts, samples, or support of residency activities were designated "pharma-free." The survey response rate was 62.2% (286/460). Among responding family medicine residencies, 52.1% refused drug samples, 48.6% disallowed industry gifts or food, 68.5% forbade industry-sponsored residency activities, and 44.1% denied industry access to students and residents at the family medicine center. Seventy-five residencies (26.2%) were designated as "pharma-free." Medical-school-based and medical-school-administered residencies were no more likely than community-based residencies to be pharma-free. Among the 211 programs that permitted interaction, 68.7% allowed gifts or food, 61.1% accepted drug samples, 71.1% allowed industry representatives access to trainees in the family medicine center, and 37.9% allowed industry-sponsored residency activities. Respondents commented on challenges inherent to limiting industry interactions. Many programs noted recent changes in plans or practices. Most family medicine residencies limit industry interaction with trainees. Because industry interactions can have adverse effects on rational prescribing, residency programs should assess the benefits and harms of these relationships. Copyright © by the Association of American medical Colleges.

A survey of occupational cancer in the rubber and cablemaking industries: analysis of deaths occurring in 1972-74.

PubMed Central

Fox, A J; Collier, P F

1976-01-01

The records of 40 867 men employed for at least one year in the rubber and cablemaking industries have now been observed for eight years. This analysis compares the mortality pattern for 1972-74 with that previously reported for 1968-71. It indicates a significant excess of deaths due to cancer of the bladder throughout the industry including men who had not been exposed to acknowledged bladder carcinogens. This excess is in deaths occurring in 1973 and 1974 in the 45-64 and 65 years plus age groups. The two sectors of the industry where this excess is significant are footwear and footwear supplies except adhesives, and the tyre sector. The excess of all cancers taken together previously noted throughout the study population for 1968-71 is confirmed for 1972-74 as is the excess for lung cancers. The greater excess in the tyre sector is also confirmed, particularly in those men in the 55-64 year age group and those who entered the industry between 1950 and 1960. While men employed in 1967 on moulding, press, autoclave, and pan curing, and workers in finished goods, stores, packaging, and despatch continue to have more lung cancer deaths than expected for 1972-74, the excess is no longer statistically significant. An excess of cancer of the stomach which was overlooked in 1968-71 is not confirmed in 1972-74 but is nevertheless high when the total period of study 1968-74 is considered. The limitations of the study are discussed with particular reference to extrapolating the results to the whole industry. We conclude that there is a higher rate of lung cancer in the tyre sector of the industry and that immediate investigations are required to test the hypothesis concerning the recent excess of bladder cancers. Attention should now be paid to the control of exposures to all potential hazards in the industry. PMID:999799

A survey of occupational cancer in the rubber and cablemaking industries: analysis of deaths occurring in 1972-74.

PubMed

Fox, A J; Collier, P F

1976-11-01

The records of 40 867 men employed for at least one year in the rubber and cablemaking industries have now been observed for eight years. This analysis compares the mortality pattern for 1972-74 with that previously reported for 1968-71. It indicates a significant excess of deaths due to cancer of the bladder throughout the industry including men who had not been exposed to acknowledged bladder carcinogens. This excess is in deaths occurring in 1973 and 1974 in the 45-64 and 65 years plus age groups. The two sectors of the industry where this excess is significant are footwear and footwear supplies except adhesives, and the tyre sector. The excess of all cancers taken together previously noted throughout the study population for 1968-71 is confirmed for 1972-74 as is the excess for lung cancers. The greater excess in the tyre sector is also confirmed, particularly in those men in the 55-64 year age group and those who entered the industry between 1950 and 1960. While men employed in 1967 on moulding, press, autoclave, and pan curing, and workers in finished goods, stores, packaging, and despatch continue to have more lung cancer deaths than expected for 1972-74, the excess is no longer statistically significant. An excess of cancer of the stomach which was overlooked in 1968-71 is not confirmed in 1972-74 but is nevertheless high when the total period of study 1968-74 is considered. The limitations of the study are discussed with particular reference to extrapolating the results to the whole industry. We conclude that there is a higher rate of lung cancer in the tyre sector of the industry and that immediate investigations are required to test the hypothesis concerning the recent excess of bladder cancers. Attention should now be paid to the control of exposures to all potential hazards in the industry.

Contrasting academic and tobacco industry estimates of illicit cigarette trade: evidence from Warsaw, Poland.

PubMed

Stoklosa, Michal; Ross, Hana

2014-05-01

To compare two different methods for estimating the size of the illicit cigarette market with each other and to contrast the estimates obtained by these two methods with the results of an industry-commissioned study. We used two observational methods: collection of data from packs in smokers' personal possession, and collection of data from packs discarded on streets. The data were obtained in Warsaw, Poland in September 2011 and October 2011. We used tests of independence to compare the results based on the two methods, and to contrast those with the estimate from the industry-commissioned discarded pack collection conducted in September 2011. We found that the proportions of cigarette packs classified as not intended for the Polish market estimated by our two methods were not statistically different. These estimates were 14.6% (95% CI 10.8% to 19.4%) using the survey data (N=400) and 15.6% (95% CI 13.2% to 18.4%) using the discarded pack data (N=754). The industry estimate (22.9%) was higher by nearly a half compared with our estimates, and this difference is statistically significant. Our findings are consistent with previous evidence of the tobacco industry exaggerating the scope of illicit trade and with the general pattern of the industry manipulating evidence to mislead the debate on tobacco control policy in many countries. Collaboration between governments and the tobacco industry to estimate tobacco tax avoidance and evasion is likely to produce upward-biased estimates of illicit cigarette trade. If governments are presented with industry estimates, they should strictly require a disclosure of all methodological details and data used in generating these estimates, and should seek advice from independent experts. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Zero Liquid Discharge approach in plating industry: treatment of degreasing effluents by electrocoagulation and anodic oxidation.

PubMed

Hermon, S; Grange, D; Pellet, Y; Lloret, G; Oyonarte, S; Bosch, F; Coste, M

2008-01-01

Degreasing waste effluents issued from a surface treatment plant were treated by electrochemical techniques in an attempt to reduce COD so that clean water can be returned to the rinse bath. Electrocoagulation, both with iron and aluminium anodes, and anodic oxidation with boron doped diamond (BDD) anodes were tested. In the electrocoagulation tests, the nature of the anodes did not impact significantly the reduction of COD. Electrocoagulation showed good COD removal rates, superior to 80%, but it was not able to reduce COD down to low levels. Anodic oxidation was able to reduce COD down to discharge limits; the oxidation efficiency was superior to 50%. Economical calculations show that anodic oxidation is best used as a polishing step after electrocoagulation. The bulk of the COD would be reduced by electrocoagulation and, then, anodic oxidation would reduce COD below discharge limits. The maximum treatable flow is somewhat hindered by the small sizes of current BDD installation but it would reach 600 m(3)/year if anodic oxidation is coupled with electrocoagulation, the operational cost being 2.90 Euros /m(3). (c) IWA Publishing 2008.

Industrial Robots on the Line.

ERIC Educational Resources Information Center

Ayres, Robert; Miller, Steve

1982-01-01

Explores the history of robotics and its effects upon the manufacturing industry. Topics include robots' capabilities and limitations, the factory of the future, displacement of the workforce, and implications for management and labor. (SK)

Will the leading firm continue to dominate the market in the Taiwan notebook industry?

NASA Astrophysics Data System (ADS)

Chu, Hsiao-Ping; Yeh, Ming-Liang; Sher, Peter J.; Chiu, Yi-Chia

2007-09-01

This study investigates whether the market share leader in the notebook industry in Taiwan is likely to maintain its dominant position. Market share data are used to investigate the intensity of competitiveness in the industry, and data on the gap in market shares are employed to elucidate the dominance of the leading firm in Taiwan's notebook industry during the 1998-2004 period. The newly developed Panel SURADF tests advanced by Breuer et al. [Misleading inferences from panel unit root tests with an illustration from purchasing power parity, Rev. Int. Econ. 9 (3) (2001) 482-493] are employed to determine whether the market share gap is stationary or not. Unlike other panel-based unit root tests which are joint tests of a unit root for all members of a panel and are incapable of determining the mix of I(0) and I(1) series in a panel setting, the Panel SURADF tests have the advantage of being able to investigate a separate unit root null hypothesis for each individual panel member and are, therefore, able to identify how many and which series in a panel are stationary processes. The empirical results from several panel-based unit root tests substantiate that the market shares of the firms studied here are non-stationary, indicating that Taiwan's notebook industry is highly competitive; however, Breuer et al.'s [12] Panel SURADF tests unequivocally show that only Compal is stationary with respect to market share gap. In terms of sales volume, Compal is the second largest firm in the notebook industry in Taiwan, and the results indicate that it alone has the opportunity to become the market share leader in the notebook industry.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Craswell, P.W.; Price, J.; Boyle, P.D.

EDTA (calcium disodium edetate) lead mobilization and x-ray fluorescence (XRF) finger bone lead tests were done in 42 patients with chronic renal failure and without persisting lead intoxication. Nineteen of 23 patients with gout and 8 of 19 without gout had positive EDTA lead mobilization tests. Those patients with gout excreted significantly more excess lead chelate than those without gout. In the gout group 17 patients denied any childhood or industrial exposure to lead. They had a greater number of positive tests and excreted significantly more excess lead chelate than 14 patients with neither gout nor lead exposure. These resultsmore » confirm that gout in the presence of chronic renal failure is a useful marker of chronic lead poisoning. Of 27 patients with positive lead mobilization tests, only 13 had elevated XRF finger bone lead concentrations (sensitivity 48%). Three of 15 patients with negative lead mobilization tests had elevated XRF finger bone lead concentrations (specificity 80%). Although the XRF finger bone lead test is a convenient noninvasive addition to the diagnostic evaluation of patients with chronic renal failure and gout, its application is limited due to the lack of sensitivity of the method.« less

Allium-test as a tool for toxicity testing of environmental radioactive-chemical mixtures

NASA Astrophysics Data System (ADS)

Oudalova, A. A.; Geras'kin, S. A.; Dikareva, N. S.; Pyatkova, S. V.

2017-01-01

Bioassay-based approaches have been propagated to assess toxicity of unknown mixtures of environmental contaminants, but it was rarely applied in cases of chemicals with radionuclides combinations. Two Allium-test studies were performed to assess environmental impact from potential sources of combined radioactive-chemical pollution. Study sites were located at nuclear waste storage facilities in European and in Far-Eastern parts of Russia. As environmental media under impact, waters from monitor wells and nearby water bodies were tested. Concentrations of some chemicals and radionuclides in the samples collected enhanced the permitted limits. Cytogenetic and cytotoxic effects were used as biological endpoints, namely, frequency and spectrum of chromosome aberrations and mitotic abnormalities in anatelophase cells as well as mitotic activity in Allium root tips. Sample points were revealed where waters have an enhanced mutagenic potential. The findings obtained could be used to optimize monitoring system and advance decision making on management and rehabilitation of industrial sites. The Allium-test could be recommended and applied as an effective tool for toxicity testing in case of combined contamination of environmental compartments with radionuclides and chemical compounds.

Modification of chitosan by swelling and crosslinking using epichlorohydrin as heavy metal Cr (VI) adsorbent in batik industry wastes

NASA Astrophysics Data System (ADS)

Hastuti, B.; Masykur, A.; Hadi, S.

2016-02-01

Study on chitosan modification by swelling and crosslinking and its application as a selective adsorbent for heavy metals Cr (VI) in batik industry wastes was done. Swelling is intended to improve chitosan porosity, whereas crosslinking is to increase the resistance of chitosan against acid. Natural samples are generally acidic, thus limiting chitosan application as an adsorbent. Modification of chitosan by combining swelling and crosslinking is expected to increase its adsorption capacity in binding heavy metal ions in water. The modified chitosan was later contacted with Cr (VI) to test its adsorption capacity with a variation of pH and contact time. Finally, application of modified chitosan was done in batik industry waste containing Cr (IV). Based on the results, chitosan-ECH 25% (v/v) was the optimum concentration of crosslinker to adsorb Cr (VI) ions. Modified chitosan has a solubility resistance to acids, even though a strong acid. Modification of chitosan also improved its adsorption capacity to Cr (VI) from 74% (pure chitosan) to 89% with contact time 30 min at pH 3. On the application to the batik wastes, the modified chitosan were able to adsorb Cr (IV) up to the level of 5 ppm. Thus, the modified chitosan has a potential to be applied to as an adsorbent of Cr (VI) in batik industry wastes.

Development of high-average-power DPSSL with high beam quality

NASA Astrophysics Data System (ADS)

Nakai, Sadao; Kanabe, Tadashi; Kawashima, Toshiyuki; Yamanaka, Masanobu; Izawa, Yasukazu; Nakatuka, Masahiro; Kandasamy, Ranganathan; Kan, Hirofumi; Hiruma, Teruo; Niino, Masayuki

2000-08-01

The recent progress of high power diode laser is opening new fields of laser and its application. We are developing high average power diode pumped solid state laser DPSSL for laser fusion power plant, for space propulsion and for various applications in industry. The common features or requirements of our High Average-power Laser for Nuclear-fusion Application (HALNA) are large pulse energy with relatively low repetition of few tens Hz, good beam quality of order of diffraction limit and high efficiency more than 10%. We constructed HALNA 10 (10J X 10 Hz) and tested the performance to clarify the scalability to higher power system. We have obtained in a preliminary experiment a 8.5 J output energy at 0.5 Hz with beam quality of 2 times diffraction limited far-field pattern.

Programmable logic controller performance enhancement by field programmable gate array based design.

PubMed

Patel, Dhruv; Bhatt, Jignesh; Trivedi, Sanjay

2015-01-01

PLC, the core element of modern automation systems, due to serial execution, exhibits limitations like slow speed and poor scan time. Improved PLC design using FPGA has been proposed based on parallel execution mechanism for enhancement of performance and flexibility. Modelsim as simulation platform and VHDL used to translate, integrate and implement the logic circuit in FPGA. Xilinx's Spartan kit for implementation-testing and VB has been used for GUI development. Salient merits of the design include cost-effectiveness, miniaturization, user-friendliness, simplicity, along with lower power consumption, smaller scan time and higher speed. Various functionalities and applications like typical PLC and industrial alarm annunciator have been developed and successfully tested. Results of simulation, design and implementation have been reported. Copyright © 2014 ISA. Published by Elsevier Ltd. All rights reserved.

Encounters in an online brand community: development and validation of a metric for value co-creation by customers.

PubMed

Hsieh, Pei-Ling

2015-05-01

Recent developments in service marketing have demonstrated the potential value co-creation by customers who participate in online brand communities (OBCs). Therefore, this study forecasts the co-created value by understanding the participation/behavior of customers in a multi-stakeholder OBC. This six-phase qualitative and quantitative investigation conceptualizes, constructs, refines, and tests a 12-item three-dimensional scale for measuring key factors that are related to the experience, interpersonal interactions, and social relationships that affect the value co-creation by customers in an OBC. The scale captures stable psychometric properties, measured using various reliability and validity tests, and can be applied across various industries. Finally, the utility implications and limitations of the proposed scale are discussed, and potential future research directions considered.

Improvement in operational characteristics of KEPCO’s line-commutation-type superconducting hybrid fault current limiter

NASA Astrophysics Data System (ADS)

Yim, S.-W.; Park, B.-C.; Jeong, Y.-T.; Kim, Y.-J.; Yang, S.-E.; Kim, W.-S.; Kim, H.-R.; Du, H.-I.

2013-01-01

A 22.9 kV class hybrid fault current limiter (FCL) developed by Korea Electric Power Corporation and LS Industrial Systems in 2006 operates using the line commutation mechanism and begins to limit the fault current after the first half-cycle. The first peak of the fault current is available for protective coordination in the power system. However, it also produces a large electromagnetic force and imposes a huge stress on power facilities such as the main transformer and gas-insulated switchgear. In this study, we improved the operational characteristics of the hybrid FCL in order to reduce the first peak of the fault current. While maintaining the structure of the hybrid FCL system, we developed a superconducting module that detects and limits the fault current during the first half-cycle. To maintain the protective coordination capacity, the hybrid FCL was designed to reduce the first peak value of the fault current by up to approximately 30%. The superconducting module was also designed to produce a minimum AC loss, generating a small, uniform magnetic field distribution during normal operation. Performance tests confirmed that when applied to the hybrid FCL, the superconducting module showed successful current limiting operation without any damage.

Fuel Cell Balance-of-Plant Reliability Testbed Project

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sproat, Vern; LaHurd, Debbie

Reliability of the fuel cell system balance-of-plant (BoP) components is a critical factor that needs to be addressed prior to fuel cells becoming fully commercialized. Failure or performance degradation of BoP components has been identified as a life-limiting factor in fuel cell systems.1 The goal of this project is to develop a series of test beds that will test system components such as pumps, valves, sensors, fittings, etc., under operating conditions anticipated in real Polymer Electrolyte Membrane (PEM) fuel cell systems. Results will be made generally available to begin removing reliability as a roadblock to the growth of the PEMmore » fuel cell industry. Stark State College students participating in the project, in conjunction with their coursework, have been exposed to technical knowledge and training in the handling and maintenance of hydrogen, fuel cells and system components as well as component failure modes and mechanisms. Three test beds were constructed. Testing was completed on gas flow pumps, tubing, and pressure and temperature sensors and valves.« less

INDUSTRIAL DERMATOLOGIC PROBLEMS—Interrelationships Between Physician, Patient, Employer and Insurance Carrier

PubMed Central

Hall, A. Fletcher

1954-01-01

Dermatologists, employers, insurance carriers and patients often flounder in misunderstanding when dealing with industrial dermatosis. A large part of such misunderstanding stems from too limited a knowledge of compensation insurance law by physicians, employee-patients and many employers. Physicians dealing with industrial cases should not only familiarize themselves with compensation law and insurance practices, but take it upon themselves to interpret such considerations to their employee-patients and, where necessary, to their patients' employers. Present-day employer-employee relationships are frequently on a most impersonal basis, and great mutual benefit will accrue to all parties when the position and objectives of each are understood by the others and the provisions and limitations of the law are known to all. The dermatologist handling industrial cases must take the responsibility of bringing this about. PMID:13116027

75 FR 22814 - Guidance for Industry: Nucleic Acid Testing (NAT) for Human Immunodeficiency Virus Type 1 (HIV-1...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-30

... Immunodeficiency Virus Type 1 (HIV-1) and Hepatitis C Virus (HCV): Testing, Product Disposition, and Donor Deferral... Industry: Nucleic Acid Testing (NAT) for Human Immunodeficiency Virus Type 1 (HIV-1) and Hepatitis C Virus... Acid Test (NAT) and Hepatitis C Virus (HCV) NAT, on testing individual samples or pooled samples from...

Active Matrix Organic Light Emitting Diode (AMOLED) Environmental Test Report

NASA Technical Reports Server (NTRS)

Salazar, George A.

2013-01-01

This report focuses on the limited environmental testing of the AMOLED display performed as an engineering evaluation by The NASA Johnson Space Center (JSC)-specifically. EMI. Thermal Vac, and radiation tests. The AMOLED display is an active-matrix Organic Light Emitting Diode (OLED) technology. The testing provided an initial understanding of the technology and its suitability for space applications. Relative to light emitting diode (LED) displays or liquid crystal displays (LCDs), AMOLED displays provide a superior viewing experience even though they are much lighter and smaller, produce higher contrast ratio and richer colors, and require less power to operate than LCDs. However, AMOLED technology has not been demonstrated in a space environment. Therefore, some risks with the technology must be addressed before they can be seriously considered for human spaceflight. The environmental tests provided preliminary performance data on the ability of the display technology to handle some of the simulated induced space/spacecraft environments that an AMOLED display will see during a spacecraft certification test program. This engineering evaluation is part of a Space Act Agreement (SM) between The NASA/JSC and Honeywell International (HI) as a collaborative effort to evaluate the potential use of AMOLED technology for future human spaceflight missions- both government-led and commercial. Under this SM, HI is responsible for doing optical performance evaluation, as well as temperature and touch screen studies. The NASA/JSC is responsible for performing environmental testing comprised of EMI, Thermal Vac, and radiation tests. Additionally, as part of the testing, limited optical data was acquired to assess performance as the display was subjected to the induced environments. The NASA will benefit from this engineering evaluation by understanding AMOLED suitability for future use in space as well as becoming a smarter buyer (or developer) of the technology. HI benefits from the environmental testing results by understanding its performance limitations/shortcomings to improve subsequent generations of AMOLED technology. Note that the AMOLED used in this test was not deSigned for the space environment but rather for commercial/industrial terrestrial applications.

Electric power competition & the economic doctrine of contestable markets

DOE Office of Scientific and Technical Information (OSTI.GOV)

Owan, R.E.

This paper addresses electric power competition and ascribes a prototypical market structure for the utility industry. The advent of {open_quotes}limited{close_quotes} competition in the electric utility industry has created interesting market challenges for incumbent companies and those eager to enter the fray. Competition is viewed as limited in the sense that not all aspects of the utility industry have been deregulated. While transmission and distribution remain protected market segments, the metamorphosis is most evident in the generation component of the utility industry. The changes have been orchestrated by favorable actions by the Federal Energy Regulatory Commission (FERC) and Public Utilities Regulatorymore » Policies Act (PURPA). Because of the industry changes, the classical view of the electric utility company as a vertical monopoly is arguable. Welfare considerations not withstanding, part of the rationale for the deregulation of power generation is that the technology and techniques are sufficiently common (i.e. not proprietary) as to allow others to provide the same product or service at competitive prices.« less

Sustainable Agro-Industrial Ecology Concept of the Madura Island

NASA Astrophysics Data System (ADS)

Widjaya, Joyce Martha; Tanuwidjaja, Gunawan

2017-07-01

Madura as one small island in East Java Province, Indonesia faced many challenges due to limited transportation connectivity, limited water resources and karst geology. Due to this reasons, the Government of Indonesia proposed a strategic plan to improve the development of the island to Surabaya, the largest port for the Eastern of Indonesia. It was started with building the Surabaya - Madura (SuraMadu) Bridge with 5.7 km length in 2003. The bridge was finally completed in 2009, improving the traffic flow into the island and development of Madura Island. Unfortunately, the strategy would not be comprehensive without strategic development of the Madura Island, especially in Bangkalan District (Kabupaten Bangkalan). The Central Government has proposed a Green Industry with zero waste and clean energy concept. This industry and port would process the agriculture products from Madura for the export and Eastern part of Indonesia market. Therefore, an industrial ecology concept was needed to achieve the sustainable green industry for Eastern of Indonesia.

A Study on the D. magna and V. fischeri Toxicity Relationship of Industrial Wastewater from Korea

NASA Astrophysics Data System (ADS)

Pyo, S.; Lee, S.; Chun Sang, H.; Park, T. J.; Kim, M. S.

2015-12-01

It is well known that high concentration of TDS (total dissolved solid) in industrial effluent gives rise to the toxicity to the Daphnia magna toxicity test. D. magna is vulnerable to relatively low TDS concentration showing the 24-hr EC50 of Salinity 0.6% (as the sea salt concentration). Recently, standard mandatory toxicity testing using Daphnia magna has been used to monitor industrial effluent toxicity according to Korea standard method (Acute Toxicity Test Method of the Daphnia magna Straus (Cladocera, Crustacea), ES 04704. 1a) under regulation. Since only one acute toxicity testing is applied in the present, we are trying to introduce microbial battery for more complete toxicity assessment. In this study, the acute toxicities between daphnids and microbes were compared. The results of D. magna and Vibrio fischeri toxicity test from 165 industrial wastewater effluents showed high positive correlation. In addition, the possibility of predicting daphnia toxicity from the bacterial toxicity data amounts to 92.6% if we consider salinity effect (>5ppt) together. From this study, we found that the V. fischeri toxicity test is a powerful battery tool to assess the industrial wastewater toxicity. Here, we suggest that luminescent bacteria toxicity test be useful not only for complete toxicity assessment which can't be obtained by daphnia toxicity testing only but also for the reduction cost, time, and labor in the Korean society. Keywords : D. magna, V. fischeri, Industrial waste water, battery test Acknowledgement This research was supported by a grant (15IFIP-B089908-02) from Plant Research Program funded by Ministry of Land, Infrastructure and Transport of Korean government

The limits of thresholds: silica and the politics of science, 1935 to 1990.

PubMed Central

Markowitz, G; Rosner, D

1995-01-01

Since the 1930s threshold limit values have been presented as an objectively established measure of US industrial safety. However, there have been important questions raised regarding the adequacy of these thresholds for protecting workers from silicosis. This paper explores the historical debates over silica threshold limit values and the intense political negotiation that accompanied their establishment. In the 1930s and early 1940s, a coalition of business, public health, insurance, and political interests formed in response to a widely perceived "silicosis crisis." Part of the resulting program aimed at containing the crisis was the establishment of threshold limit values. Yet silicosis cases continued to be documented. By the 1960s these cases had become the basis for a number of revisions to the thresholds. In the 1970s, following a National Institute for Occupational Safety and Health recommendation to lower the threshold limit value for silica and to eliminate sand as an abrasive in blasting, industry fought attempts to make the existing values more stringent. This paper traces the process by which threshold limit values became part of a compromise between the health of workers and the economic interests of industry. Images p254-a p256-a p257-a p259-a PMID:7856788

40 CFR 62.14630 - What emission limitations must I meet and by when?

Code of Federal Regulations, 2013 CFR

2013-07-01

... POLLUTANTS Federal Plan Requirements for Commercial and Industrial Solid Waste Incineration Units That Commenced Construction On or Before November 30, 1999 Emission Limitations and Operating Limits § 62.14630...

Imaging-based optical caliper for objects in hot manufacturing processes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Huang, Howard

OG Technologies, Inc. (OGT), in conjunction with its industrial and academic partners, proposes to develop an Imaging-Based Optical Caliper (hereafter referred to as OC) for Objects in Hot Manufacturing Processes. The goal is to develop and demonstrate the OC with the synergy of OGT's current technological pool and other innovations to provide a light weight, robust, safe and accurate portable dimensional measurement device for hot objects with integrated wireless communication capacity to enable real time process control. The technical areas of interest in this project are the combination of advanced imaging, Sensor Fusion, and process control. OGT believes that themore » synergistic interactions between its current set of technologies and other innovations could deliver products that are viable and have high impact in the hot manufacture processes, such as steel making, steel rolling, open die forging, and glass industries, resulting in a new energy efficient control paradigm in the operations through improved yield, prolonged tool life and improved quality. In-line dimension measurement and control is of interest to the steel makers, yet current industry focus is on the final product dimension only instead of whole process due to the limit of man power, system cost and operator safety concerns. As sensor technologies advances, the industry started to see the need to enforce better dimensional control throughout the process, but lack the proper tools to do so. OGT along with its industrial partners represent the indigenous effort of technological development to serve the US steel industry. The immediate market that can use and get benefited from the proposed OC is the Steel Industry. The deployment of the OC has the potential to provide benefits in reduction of energy waste, CO2 emission, waste water amount, toxic waste, and so forth. The potential market after further expended function includes Hot Forging and Freight Industries. The OC prototypes were fabricated, and were progressively tested on-site in several steel mill and hot forging facilities for evaluation. Software refinements and new calibration procedures were also carried out to overcome the discovered glitches. Progress was presented to the hot manufacture facilities worldwide. Evidence showed a great interest and practical need for this product. OGT is in the pilot commercialization mode for this new development. The R&D team also successfully developed a 3D measurement function with no additional investment of hardware or equipment to measure low or room temperature object dimensions. Several tests were conducted in the reality environment to evaluate the measurement results. This new application will require additional development in product design.« less

40 CFR 158.2174 - Experimental use permit microbial pesticides nontarget organisms and environmental fate data...

Code of Federal Regulations, 2014 CFR

2014-07-01

..., residential, and industrial). Terrestrial uses include: Food, Feed, Non-Food, Forestry, Residential outdoor, greenhouse (food and food), Indoor (food and nonfood), and Industrial. (c) Key. R=Required; CR=Conditionally... Indoor Food/Nonfood Industrial Test Substance Test Notes 885.4050 Avian oraltoxicity NR R R R R NR NR NR...

40 CFR 158.2174 - Experimental use permit microbial pesticides nontarget organisms and environmental fate data...

Code of Federal Regulations, 2013 CFR

2013-07-01

..., residential, and industrial). Terrestrial uses include: Food, Feed, Non-Food, Forestry, Residential outdoor, greenhouse (food and food), Indoor (food and nonfood), and Industrial. (c) Key. R=Required; CR=Conditionally... Indoor Food/Nonfood Industrial Test Substance Test Notes 885.4050 Avian oraltoxicity NR R R R R NR NR NR...

40 CFR 158.2174 - Experimental use permit microbial pesticides nontarget organisms and environmental fate data...

Code of Federal Regulations, 2012 CFR

2012-07-01

..., residential, and industrial). Terrestrial uses include: Food, Feed, Non-Food, Forestry, Residential outdoor, greenhouse (food and food), Indoor (food and nonfood), and Industrial. (c) Key. R=Required; CR=Conditionally... Indoor Food/Nonfood Industrial Test Substance Test Notes 885.4050 Avian oraltoxicity NR R R R R NR NR NR...

Development and Validation of an Acid Mine Drainage Treatment Process for Source Water

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lane, Ann

Throughout Northern Appalachia and surrounding regions, hundreds of abandoned mine sites exist which frequently are the source of Acid Mine Drainage (AMD). AMD typically contains metal ions in solution with sulfate ions which have been leached from the mine. These large volumes of water, if treated to a minimum standard, may be of use in Hydraulic Fracturing (HF) or other industrial processes. This project’s focus is to evaluate an AMD water treatment technology for the purpose of providing treated AMD as an alternative source of water for HF operations. The HydroFlex™ technology allows the conversion of a previous environmental liabilitymore » into an asset while reducing stress on potable water sources. The technology achieves greater than 95% water recovery, while removing sulfate to concentrations below 100 mg/L and common metals (e.g., iron and aluminum) below 1 mg/L. The project is intended to demonstrate the capability of the process to provide AMD as alternative source water for HF operations. The second budget period of the project has been completed during which Battelle conducted two individual test campaigns in the field. The first test campaign demonstrated the ability of the HydroFlex system to remove sulfate to levels below 100 mg/L, meeting the requirements indicated by industry stakeholders for use of the treated AMD as source water. The second test campaign consisted of a series of focused confirmatory tests aimed at gathering additional data to refine the economic projections for the process. Throughout the project, regular communications were held with a group of project stakeholders to ensure alignment of the project objectives with industry requirements. Finally, the process byproduct generated by the HydroFlex process was evaluated for the treatment of produced water against commercial treatment chemicals. It was found that the process byproduct achieved similar results for produced water treatment as the chemicals currently in use. Further, the process byproduct demonstrated better settling characteristics in bench scale testing. The field testing conducted in the second project budget period demonstrated the ability of the HydroFlex technology to meet industry requirements for AMD water chemical composition so that it can be used as source water in HF activities. System and operational improvements were identified in an additional series of confirmatory tests to achieve competitive cost targets. Finally, the application of the HydroFlex process byproduct in produced water treatment was demonstrated, further supporting the commercial implementation of the technology. Overall, the project results demonstrate a path to the economic treatment of AMD to support its increased use as source water in HF, particularly in regions with limited local freshwater availability.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gangopadhyay, Arup; McWatt, D. G.; Zdrodowski, R. J.

Engine oils play a critical role in friction reduction. Improvements in engine oil technology steadily improved fuel economy as the industry moved through ILSAC GF-1 to GF-5 specifications. These improvements were influenced by changes in base oil chemistry, development of new friction modifiers and their treat levels, and the total additive package consisting of various other components. However, the improvements are incremental and further fuel consumption reduction opportunities are becoming more challenging. Polyalkylene glycol (PAG) based engine oils are being explored as a step forward for significant fuel consumption reduction. Although PAG fluids are used in many industrial applications, itsmore » application as an engine oil has been explored in a limited way. The objective of this project is to deep dive in exploring the applicability of PAG technology in engine oil, understanding the benefits, and limitations, elucidating the mechanism(s) for friction benefits, if any, and finally recommending how to address any limitations. The project was designed in four steps, starting with selection of lubricant technology, followed by friction and wear evaluations in laboratory bench tests which are relatively simple and inexpensive and also served as a screener for further evaluation. Selected formulations were chosen for more complex engine component level tests i.e., motored valvetrain friction and wear, piston ring friction using a motored single cylinder, and motored engine tests. A couple of formulations were further selected based on component level tests for engine dyno tests i.e., Sequence VID (ASTM D6709) for fuel economy, Sequence IVA (ASTM D6891) for valvetrain wear, and Sequence VG (ASTM D6593) for sludge and varnish protection. These are some of the industry standard tests required for qualifying engine oils. Out of these tests, a single PAG oil was selected for chassis roll dynamometer tests for fuel economy and emission measurements using FTP (Federal Test Procedure) metro/highway cycles. Five different PAG chemistries were selected by varying the starting alcohol, the oxide monomers (ethylene oxide, propylene oxide, or butylene oxide), capped or uncapped, homopolymer or random copolymer. All formulations contained a proprietary additive package and one which contained additional antiwear and friction modifier additives. Laboratory bench tests (Pin-on-Disk, High Frequency Reciprocating Rig (HFRR), Block-on-Ring, Mini-Traction Machine (MTM) identified formulations having friction, wear, and load carrying characteristics similar to or better than baseline GF-5 SAE 5W-20 oil. Motored valvetrain and motored piston ring friction tests showed nearly 50% friction reduction for some of the PAG formulations compared to GF-5 SAE 5W-20 oil. Motored engine tests showed up to 15% friction benefit over GF-5 SAE 5W-20 oil. It was observed that friction benefits are more related to PAG base oil chemistry than their lower viscosity compared to GF-5 SAE 5W-20 oil. Analysis of wear surfaces from laboratory bench tests and bucket tappets from motored valvetrain tests confirmed the presence of PAG molecules. The adsorption of these polar molecules is believed to be reason for friction reduction. However, the wear surfaces also had thin tribo-film derived from additive components. The tribo-film consisting of phosphates, sulfides, and molybdenum disulfide (when molybdenum additive was present) were observed for both GF-5 SAE 5W-20 and PAG fluids. However, when using PAG fluids, motored valvetrain tests showed high initial wear, which is believed to be due to delay in protective tribo-film formation. After the initial wear, the wear rate of PAG fluids was comparable to GF-5 SAE 5W-20 oil. The PAG oil containing additional antiwear and friction reducing additives showed low initial wear as expected. However, when this oil was evaluated in Sequence IVA test, it showed initially low wear comparable to GF-5 oil but wear accelerated with oil aging indicating rapid deterioration of additive components. ASTM Sequence VG test showed good sludge protection capability but failed to meet varnish rating for GF-5 requirement. Chassis roll dynamometer tests with PAG oil 15-1 showed about 1% fuel economy benefit over GF-5 SAE 5W-20 oil in EPA city cycles only and when the oil was slightly aged (500 miles). No fuel economy benefits could be observed in combined EPA metro/highway cycles. Also, no fuel economy benefit could be observed with continued (500- 10000 miles) oil aging. However, the emission level was comparable to the reference oil and was within EPA limits. Analysis of the PAG oil following tests showed low iron content although additive components were significantly degraded. The results indicate that PAG fluids have significant friction reduction potential but there are challenges with wear and varnish protection capabilities. These limitations are primarily because the selected additive components were chosen to provide a fluid with no metal content that forms little or no sulphated ash. Significant development work is needed to identify additive components compatible with PAG chemistry including their solubility in PAG oil. Miscibility of PAG fluids with mineral base oil is another challenge for oil change service. There is PAG chemistry (oil soluble PAG, OSP) which is soluble in mineral oils but the formulation explored in this investigation did not show significant friction reduction in motored engine tests. Again, highlighting the need for additive development for specific PAG chemistry. The thermal oxidation behavior of these oils has not been explored in this investigation and needs attention.« less

Test battery with the human cell line activation test, direct peptide reactivity assay and DEREK based on a 139 chemical data set for predicting skin sensitizing potential and potency of chemicals.

PubMed

Takenouchi, Osamu; Fukui, Shiho; Okamoto, Kenji; Kurotani, Satoru; Imai, Noriyasu; Fujishiro, Miyuki; Kyotani, Daiki; Kato, Yoshinao; Kasahara, Toshihiko; Fujita, Masaharu; Toyoda, Akemi; Sekiya, Daisuke; Watanabe, Shinichi; Seto, Hirokazu; Hirota, Morihiko; Ashikaga, Takao; Miyazawa, Masaaki

2015-11-01

To develop a testing strategy incorporating the human cell line activation test (h-CLAT), direct peptide reactivity assay (DPRA) and DEREK, we created an expanded data set of 139 chemicals (102 sensitizers and 37 non-sensitizers) by combining the existing data set of 101 chemicals through the collaborative projects of Japan Cosmetic Industry Association. Of the additional 38 chemicals, 15 chemicals with relatively low water solubility (log Kow > 3.5) were selected to clarify the limitation of testing strategies regarding the lipophilic chemicals. Predictivities of the h-CLAT, DPRA and DEREK, and the combinations thereof were evaluated by comparison to results of the local lymph node assay. When evaluating 139 chemicals using combinations of three methods based on integrated testing strategy (ITS) concept (ITS-based test battery) and a sequential testing strategy (STS) weighing the predictive performance of the h-CLAT and DPRA, overall similar predictivities were found as before on the 101 chemical data set. An analysis of false negative chemicals suggested a major limitation of our strategies was the testing of low water-soluble chemicals. When excluded the negative results for chemicals with log Kow > 3.5, the sensitivity and accuracy of ITS improved to 97% (91 of 94 chemicals) and 89% (114 of 128). Likewise, the sensitivity and accuracy of STS to 98% (92 of 94) and 85% (111 of 129). Moreover, the ITS and STS also showed good correlation with local lymph node assay on three potency classifications, yielding accuracies of 74% (ITS) and 73% (STS). Thus, the inclusion of log Kow in analysis could give both strategies a higher predictive performance. Copyright © 2015 John Wiley & Sons, Ltd.

Migrant Response to Industrialization in Four Rural Areas, 1965-70. Agricultural Economic Report No. 270.

ERIC Educational Resources Information Center

Olsen, Duane A.; Kuehn, John A.

Immigrants competed on a limited scale with residents for new jobs in four industrializing rural areas in Arizona, the Central Ozarks, Mississippi, and Arkansas during 1965-70. This study determined: (1) competition for jobs between residents and immigrants; (2) need for immigrants to staff industries; and (3) differences between attributes of…

Employee Educational Programs: Implications for Industry and Higher Education. ASHE-ERIC Higher Education Research Report No. 7.

ERIC Educational Resources Information Center

Morse, Susanne W.

Current types of industry-sponsored educational programs, training facilities, and teaching and evaluation methods are described. The history of education and training within the corporate world and the roles of government and unions are traced. Factors that have limited college and industrial cooperation in employee education are also identified.…

University-Industry Relationships in Colleges of Agriculture and Life Sciences: The Role of Women Faculty

ERIC Educational Resources Information Center

Crowe, Jessica A.; Goldberger, Jessica R.

2009-01-01

An increasing amount of research has been dedicated to studying university-industry relationships (UIRs). Researchers have studied the impacts of UIRs on the integrity of university research. However, while studies have examined the attitudes and actions of university administration and industry leaders with respect to UIRs, limited attention has…

26 CFR 1.1060-1 - Special allocation rules for certain asset acquisitions.

Code of Federal Regulations, 2013 CFR

2013-04-01

... connectors in limited quantities. It is a successful company with a reputation within the industry and among... establish an immediate presence in the microwave industry, an area in which it previously has not been... mix and to promote its presence in the microwave industry. P will not use the assets acquired from S...

26 CFR 1.1060-1 - Special allocation rules for certain asset acquisitions.

Code of Federal Regulations, 2012 CFR

2012-04-01

... connectors in limited quantities. It is a successful company with a reputation within the industry and among... establish an immediate presence in the microwave industry, an area in which it previously has not been... mix and to promote its presence in the microwave industry. P will not use the assets acquired from S...

26 CFR 1.1060-1 - Special allocation rules for certain asset acquisitions.

Code of Federal Regulations, 2014 CFR

2014-04-01

... connectors in limited quantities. It is a successful company with a reputation within the industry and among... establish an immediate presence in the microwave industry, an area in which it previously has not been... mix and to promote its presence in the microwave industry. P will not use the assets acquired from S...

26 CFR 1.1060-1 - Special allocation rules for certain asset acquisitions.

Code of Federal Regulations, 2011 CFR

2011-04-01

... connectors in limited quantities. It is a successful company with a reputation within the industry and among... establish an immediate presence in the microwave industry, an area in which it previously has not been... mix and to promote its presence in the microwave industry. P will not use the assets acquired from S...

High power cable with internal water cooling 400 kV

NASA Astrophysics Data System (ADS)

Rasquin, W.; Harjes, B.

1982-08-01

Due to the concentration of electricity production in large power plants, the need of higher power transmissions, and the protection of environment, developement of a 400 kV water cooled cable in the power range of 1 to 5 GVA was undertaken. The fabrication and testing of equipment, engineering of cable components, fabrication of a test cable, development of cable terminal laboratory, testing of test cable, field testing of test cable, fabrication of industrial cable laboratory, testing of industrial cable, field testing of industrial cable, and system analysis for optimization were prepared. The field testing was impossible to realize. However, it is proved that a cable consisting of an internal stainless steel water cooled tube, covered by stranded copper profiles, insulated with heavy high quality paper, and protected by an aluminum cover can be produced, withstand tests accordingly to IEC/VDE recommendations, and is able to fulfill all exploitation conditions.

United Kingdom Automobile Insurance Market

DOT National Transportation Integrated Search

1979-05-01

The report represents a limited study of the United Kingdom Automobile Insurance Industry: (1) the structure, size, and relationships within the industry; (2) the basis of premium calculation, rate structure, types of policies, and payment of compens...

Workshop proceedings: challenges and opportunities in evaluating protein allergenicity across biotechnology industries.

PubMed

Stagg, Nicola J; Ghantous, Hanan N; Ladics, Gregory S; House, Robert V; Gendel, Steven M; Hastings, Kenneth L

2013-01-01

A workshop entitled "Challenges and Opportunities in Evaluating Protein Allergenicity across Biotechnology Industries" was held at the 51st Annual Meeting of the Society of Toxicology (SOT) in San Francisco, California. The workshop was sponsored by the Biotechnology Specialty Section of SOT and was designed to present the science-based approaches used in biotechnology industries to evaluate and regulate protein allergenicity. A panel of experts from industry and government highlighted the allergenicity testing requirements and research in the agricultural, pharmaceutical/biopharma, and vaccine biotechnology industries and addressed challenges and opportunities for advancing the science of protein allergenicity. The main learning from the workshop was that immunoglobulin E-mediated allergenicity of biotechnology-derived products is difficult to assess without human data. The approaches currently being used to evaluate potential for allergenicity across biotechnology industries are very different and range from bioinformatics, in vitro serology, in vivo animal testing, in vitro and in vivo functional assays, and "biosimilar" assessments (ie, biotherapeutic equivalents to innovator products). The challenge remains with regard to the different or lack of regulatory requirements for allergenicity testing across industries, but the novel approaches being used with bioinformatics and biosimilars may lead to opportunities in the future to collaborate across biotechnology industries.

Performance of blue-yellow screening test for antimicrobial detection in ovine milk.

PubMed

Linage, B; Gonzalo, C; Carriedo, J A; Asensio, J A; Blanco, M A; De La Fuente, L F; San Primitivo, F

2007-12-01

Drug residues in milk are important because of public health and industrial implications. The detection limits of 25 antimicrobial agents were determined by the blue-yellow screening method in ovine milk. For each drug, 8 concentrations were tested on 20 ovine milk samples from individual ewes in midlactation. Detection limits determined by means of logistic regression were below European Union maximum residue limits (EU-MRL) for penicillin G (3 to 4 microg/kg), ceftiofur (96 to 107 microg/kg), framycetin (720 to 781 microg/kg), neomycin (915 to 1,084 microg/kg), and tylosin (44 to 51 microg/kg). Detection limits for ampicillin (5 to 6 microg/kg), cloxacillin (33 to 42 microg/kg), cefoperazone (73 to 82 microg/kg), cefalexin (160 to 202 microg/kg), gentamycin (355 to 382 microg/kg), streptomycin (3,063 to 3,593 microg/kg), tilmicosin (109 to 131 microg/kg), erythromycin (444 to 522 microg/kg), spyramicin (1,106 to 1,346 microg/kg), sulfadimethoxine (101 to 119 microg/kg), sulfathiazole (122 to 151 microg/kg), sulfamethazine (309 to 328 microg/kg), sulfanilamide (1,750 to 2,674 microg/kg), tetracycline (233 to 257 microg/kg), oxytetracycline (398 to 501 microg/kg), doxycycline (323 to 419 microg/kg), chlortetracycline (3,331 to 3,989 microg/kg), danofloxacin (4.7 to 5.5 mg/kg), enrofloxacin (41 to 46 mg/kg), and flumequin (63 to 71 mg/kg) were higher than the EU-MRL. Although the blue-yellow method showed improved sensitivity compared with other tests studied in ovine milk, the performance of screening methods for detecting antimicrobial agents in milk of this species should be improved.

78 FR 60977 - Self-Regulatory Organizations; The NASDAQ Stock Market LLC; Notice of Filing and Immediate...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-02

... Volatility \\6\\ (the ``Limit Up-Limit Down Plan''). The Exchange believes the benefits to market participants... April 8, 2014, which is one year following commencement of operations of the Limit Up-Limit Down Plan... should continue while the industry gains further experience operating the Limit Up-Limit Down Plan. \\3...

78 FR 60991 - Self-Regulatory Organizations; International Securities Exchange, LLC; Notice of Filing and...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-02

... of Regulation NMS under the Act (the ``Limit Up- Limit Down Plan'' or the ``Plan'').\\6\\ The Exchange... Erroneous Rule should continue while the industry gains further experience operating the Limit Up-Limit Down... (June 6, 2012) (the ``Limit Up-Limit Down Release''); see also ISE Rule 2128(i). The Exchange also...

78 FR 61427 - Self-Regulatory Organizations; NASDAQ OMX BX, Inc.; Notice of Filing and Immediate Effectiveness...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-03

...\\ (the ``Limit Up-Limit Down Plan''). The Exchange believes the benefits to market participants from the..., which is one year following commencement of operations of the Limit Up-Limit Down Plan. The Exchange... the industry gains further experience operating the Limit Up-Limit Down Plan. \\3\\ Securities Exchange...

An Assessment of Drug Testing within the Construction Industry.

ERIC Educational Resources Information Center

Gerber, Jonathan K.; Yacoubian, George S., Jr.

2002-01-01

Investigates the efficacy of workplace drug-testing programs in reducing injury incident rates and workers' compensation experience-rating modification factors within the construction industry. Analyses indicate that companies with drug-testing programs experienced a 51 percent reduction in incident rates within two years of implementation.…

75 FR 71596 - Energy Efficiency Program for Certain Commercial and Industrial Equipment: Test Procedures for...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-24

... Efficiency Program for Certain Commercial and Industrial Equipment: Test Procedures for Commercial Refrigeration Equipment AGENCY: Office of Energy Efficiency and Renewable Energy, Department of Energy. ACTION... amendments to its test procedure for commercial refrigeration equipment (CRE). The amendments would update...

Raising the Barriers to Access to Medicines in the Developing World - The Relentless Push for Data Exclusivity.

PubMed

Diependaele, Lisa; Cockbain, Julian; Sterckx, Sigrid

2017-04-01

Since the adoption of the WTO-TRIPS Agreement in 1994, there has been significant controversy over the impact of pharmaceutical patent protection on the access to medicines in the developing world. In addition to the market exclusivity provided by patents, the pharmaceutical industry has also sought to further extend their monopolies by advocating the need for additional 'regulatory' protection for new medicines, known as data exclusivity. Data exclusivity limits the use of clinical trial data that need to be submitted to the regulatory authorities before a new drug can enter the market. For a specified period, generic competitors cannot apply for regulatory approval for equivalent drugs relying on the originator's data. As a consequence, data exclusivity lengthens the monopoly for the original drug, impairing the availability of generic drugs. This article illustrates how the pharmaceutical industry has convinced the US and the EU to impose data exclusivity on their trade partners, many of them developing countries. The key arguments formulated by the pharmaceutical industry in favor of adopting data exclusivity and their underlying ethical assumptions are described in this article, analyzed, and found to be unconvincing. Contrary to industry's arguments, it is unlikely that data exclusivity will promote innovation, especially in developing countries. Moreover, the industry's appeal to a property rights claim over clinical test data and the idea that data exclusivity can prevent the generic competitors from 'free-riding' encounters some important problems: Neither legitimize excluding all others. © 2016 The Authors Developing World Bioethics Published by John Wiley & Sons Ltd.

Development of a numerical methodology for flowforming process simulation of complex geometry tubes

NASA Astrophysics Data System (ADS)

Varela, Sonia; Santos, Maite; Arroyo, Amaia; Pérez, Iñaki; Puigjaner, Joan Francesc; Puigjaner, Blanca

2017-10-01

Nowadays, the incremental flowforming process is widely explored because of the usage of complex tubular products is increasing due to the light-weighting trend and the use of expensive materials. The enhanced mechanical properties of finished parts combined with the process efficiency in terms of raw material and energy consumption are the key factors for its competitiveness and sustainability, which is consistent with EU industry policy. As a promising technology, additional steps for extending the existing flowforming limits in the production of tubular products are required. The objective of the present research is to further expand the current state of the art regarding limitations on tube thickness and diameter, exploring the feasibility to flowform complex geometries as tubes of elevated thickness of up to 60 mm. In this study, the analysis of the backward flowforming process of 7075 aluminum tubular preform is carried out to define the optimum process parameters, machine requirements and tooling geometry as demonstration case. Numerical simulation studies on flowforming of thin walled tubular components have been considered to increase the knowledge of the technology. The calculation of the rotational movement of the mesh preform, the high ratio thickness/length and the thermomechanical condition increase significantly the computation time of the numerical simulation model. This means that efficient and reliable tools able to predict the forming loads and the quality of flowformed thick tubes are not available. This paper aims to overcome this situation by developing a simulation methodology based on FEM simulation code including new strategies. Material characterization has also been performed through tensile test to able to design the process. Finally, to check the reliability of the model, flowforming tests at industrial environment have been developed.

Engineered monoculture and co-culture of methylotrophic yeast for de novo production of monacolin J and lovastatin from methanol.

PubMed

Liu, Yiqi; Tu, Xiaohu; Xu, Qin; Bai, Chenxiao; Kong, Chuixing; Liu, Qi; Yu, Jiahui; Peng, Qiangqiang; Zhou, Xiangshan; Zhang, Yuanxing; Cai, Menghao

2018-01-01

As a promising one-carbon renewable substrate for industrial biotechnology, methanol has attracted much attention. However, engineering of microorganisms for industrial production of pharmaceuticals using a methanol substrate is still in infancy. In this study, the methylotrophic yeast Pichia pastoris was used to produce anti-hypercholesterolemia pharmaceuticals, lovastatin and its precursor monacolin J, from methanol. The biosynthetic pathways for monacolin J and lovastatin were first assembled and optimized in single strains using single copies of the relevant biosynthetic genes, and yields of 60.0mg/L monacolin J and 14.4mg/L lovastatin were obtained using methanol following pH controlled monoculture. To overcome limitations imposed by accumulation of intermediates and metabolic stress in monoculture, approaches using pathway splitting and co-culture were developed. Two pathway splitting strategies for monacolin J, and four for lovastatin were tested at different metabolic nodes. Biosynthesis of monacolin J and lovastatin was improved by 55% and 71%, respectively, when the upstream and downstream modules were separately accommodated in two different fluorescent strains, split at the metabolic node of dihydromonacolin L. However, pathway distribution at monacolin J blocked lovastatin biosynthesis in all designs, mainly due to its limited ability of crossing cellular membranes. Bioreactor fermentations were tested for the optimal co-culture strategies, and yields of 593.9mg/L monacolin J and 250.8mg/L lovastatin were achieved. This study provides an alternative method for production of monacolin J and lovastatin and reveals the potential of a methylotrophic yeast to produce complicated pharmaceuticals from methanol. Copyright © 2017 International Metabolic Engineering Society. Published by Elsevier Inc. All rights reserved.

D Modeling of Industrial Heritage Building Using COTSs System: Test, Limits and Performances

NASA Astrophysics Data System (ADS)

Piras, M.; Di Pietra, V.; Visintini, D.

2017-08-01

The role of UAV systems in applied geomatics is continuously increasing in several applications as inspection, surveying and geospatial data. This evolution is mainly due to two factors: new technologies and new algorithms for data processing. About technologies, from some years ago there is a very wide use of commercial UAV even COTSs (Commercial On-The-Shelf) systems. Moreover, these UAVs allow to easily acquire oblique images, giving the possibility to overcome the limitations of the nadir approach related to the field of view and occlusions. In order to test potential and issue of COTSs systems, the Italian Society of Photogrammetry and Topography (SIFET) has organised the SBM2017, which is a benchmark where all people can participate in a shared experience. This benchmark, called "Photogrammetry with oblique images from UAV: potentialities and challenges", permits to collect considerations from the users, highlight the potential of these systems, define the critical aspects and the technological challenges and compare distinct approaches and software. The case study is the "Fornace Penna" in Scicli (Ragusa, Italy), an inaccessible monument of industrial architecture from the early 1900s. The datasets (images and video) have been acquired from three different UAVs system: Parrot Bebop 2, DJI Phantom 4 and Flytop Flynovex. The aim of this benchmark is to generate the 3D model of the "Fornace Penna", making an analysis considering different software, imaging geometry and processing strategies. This paper describes the surveying strategies, the methodologies and five different photogrammetric obtained results (sensor calibration, external orientation, dense point cloud and two orthophotos), using separately - the single images and the frames extracted from the video - acquired with the DJI system.

PKI solar thermal plant evaluation at Capitol Concrete Products, Topeka, Kansas

NASA Astrophysics Data System (ADS)

Hauger, J. S.; Borton, D. N.

1982-07-01

A system feasibility test to determine the technical and operational feasibility of using a solar collector to provide industrial process heat is discussed. The test is of a solar collector system in an industrial test bed plant at Capitol Concrete Products in Topeka, Kansas, with an experiment control at Sandia National Laboratories, Albuquerque. Plant evaluation will occur during a year-long period of industrial utilization. It will include performance testing, operability testing, and system failure analysis. Performance data will be recorded by a data acquisition system. User, community, and environmental inputs will be recorded in logs, journals, and files. Plant installation, start-up, and evaluation, are anticipated for late November, 1981.

PKI solar thermal plant evaluation at Capitol Concrete Products, Topeka, Kansas

NASA Technical Reports Server (NTRS)

Hauger, J. S.; Borton, D. N.

1982-01-01

A system feasibility test to determine the technical and operational feasibility of using a solar collector to provide industrial process heat is discussed. The test is of a solar collector system in an industrial test bed plant at Capitol Concrete Products in Topeka, Kansas, with an experiment control at Sandia National Laboratories, Albuquerque. Plant evaluation will occur during a year-long period of industrial utilization. It will include performance testing, operability testing, and system failure analysis. Performance data will be recorded by a data acquisition system. User, community, and environmental inputs will be recorded in logs, journals, and files. Plant installation, start-up, and evaluation, are anticipated for late November, 1981.

Advanced Combat Helmet Technical Assessment

DTIC Science & Technology

2013-05-29

Lastly, we assessed the participation of various stakeholders and industry experts such as active ACH manufacturers and test facilities. Findings... industrially accepted American National Standards Institute (ANSI Z1.4-2008, Sampling Visit us on the web at www.dodig.mil Results in Brief Advanced...statistically principled approach and the lot acceptance test protocol adopts a widely established and industrially accepted sampling procedure. We

Prediction Of The Fracture Due To Mannesmann Effect In Tube Piercing

NASA Astrophysics Data System (ADS)

Fanini, S.; Ghiotti, A.; Bruschi, S.

2007-05-01

Mannesmann piercing process is a well-known hot rolling process used for seamless tube production. Its special feature is the so-called Mannesmann effect, that is the cavity formation in the center of the cylindrical billet and its propagation along the axis due to stress state caused by the rolls in the early stages of the process. The cavity is then expanded and sized in its internal diameter by an incoming plug. The industrial requirement is to know quite precisely the characteristics of the cavity especially in terms of its location along the billet axis in order to minimize the plug wear and the oxidation of the pierced bar. However, the scientific knowledge about the fracture mechanism leading to the Mannesmann effect is still limited, even if several theories have been proposed; this lack makes the design and optimization of the process through numerical simulations still a challenging task. The aim of this work is then to develop a suitably calibrated FE model of the piercing process in its first stage before the plug arrival, in order to investigate the Mannesmann effect using different damage criteria. Hot tensile tests, capable to reproduce the industrial conditions in terms of temperature, strain rate, and stress states, are carried out to investigate the material workability and to determine the parameters of the damage models on specimens machined from continuous-casting steel billets. The calculated parameters are implemented in the numerical model of the process and a sensitivity analysis to the different criteria is carried out, comparing numerical results with non-plug piercing tests conducted in the industrial plant.

A historical and economic perspective on Sir John Charnley, Chas F. Thackray Limited, and the early arthoplasty industry.

PubMed

Gomez, Pablo F; Morcuende, Jose A

2005-01-01

In the 1960s, Sir John Charnley pioneered modern total hip arthroplasty (THA) and spent the next two decades refining all aspects of the procedure, working with the commercial firm of Chas F. Thackray Limited, now a subsidiary of DePuy Orthopaedics, a Johnson and Johnson Company. We review here that relationship, in light of the complex relationships today that exist among industry, researchers, surgeons, and the public.

Nozzle Initiative Industry Advisory Committee on Standardization of Carbon-Phenolic Test Methods and Specifications

NASA Technical Reports Server (NTRS)

Bull, William B. (Compiler); Pinoli, Pat C. (Compiler); Upton, Cindy G. (Compiler); Day, Tony (Compiler); Hill, Keith (Compiler); Stone, Frank (Compiler); Hall, William B.

1994-01-01

This report is a compendium of the presentations of the 12th biannual meeting of the Industry Advisory Committee under the Solid Propulsion Integrity Program. A complete transcript of the welcoming talks is provided. Presentation outlines and overheads are included for the other sessions: SPIP Overview, Past, Current and Future Activity; Test Methods Manual and Video Tape Library; Air Force Developed Computer Aided Cure Program and SPC/TQM Experience; Magneto-Optical mapper (MOM), Joint Army/NASA program to assess composite integrity; Permeability Testing; Moisture Effusion Testing by Karl Fischer Analysis; Statistical Analysis of Acceptance Test Data; NMR Phenolic Resin Advancement; Constituent Testing Highlights on the LDC Optimization Program; Carbon Sulfur Study, Performance Related Testing; Current Rayon Specifications and Future Availability; RSRM/SPC Implementation; SRM Test Methods, Delta/Titan/FBM/RSRM; and Open Forum on Performance Based Acceptance Testing -- Industry Experience.

Proceedings of the DoD/Industry Technical Information Conference 7-8 December 1982

DTIC Science & Technology

1983-04-01

Government-Productivity in the U.S./Limited Research Partnerships for R&DDr. Jack Williams 1................ Industry-Industry/DoD Relationship• Mr. Daniel ...Board regulations /0 DANIEL SULLIVAN President Frost & Sullivan Incorporated INDUSTRY/DOD RELATIONSHIP The purpose of my talk is to set the tone by...Roger Collins Washington, D.C. 20305 Dept. 07-30, Bldg. 9-Al Lockheed Daniel a. Donovan P.o. Box 551 Director, Washington Operations Burbank, CA 91520

Assessing global resource utilization efficiency in the industrial sector.

PubMed

Rosen, Marc A

2013-09-01

Designing efficient energy systems, which also meet economic, environmental and other objectives and constraints, is a significant challenge. In a world with finite natural resources and large energy demands, it is important to understand not just actual efficiencies, but also limits to efficiency, as the latter identify margins for efficiency improvement. Energy analysis alone is inadequate, e.g., it yields energy efficiencies that do not provide limits to efficiency. To obtain meaningful and useful efficiencies for energy systems, and to clarify losses, exergy analysis is a beneficial and useful tool. Here, the global industrial sector and industries within it are assessed by using energy and exergy methods. The objective is to improve the understanding of the efficiency of global resource use in the industrial sector and, with this information, to facilitate the development, prioritization and ultimate implementation of rational improvement options. Global energy and exergy flow diagrams for the industrial sector are developed and overall efficiencies for the global industrial sector evaluated as 51% based on energy and 30% based on exergy. Consequently, exergy analysis indicates a less efficient picture of energy use in the global industrial sector than does energy analysis. A larger margin for improvement exists from an exergy perspective, compared to the overly optimistic margin indicated by energy. Copyright © 2012 Elsevier B.V. All rights reserved.

77 FR 58999 - Draft Guidance for Industry on Abbreviated New Drug Applications: Stability Testing of Drug...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-25

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2012-D-0938] Draft Guidance for Industry on Abbreviated New Drug Applications: Stability Testing of Drug Substances... their complexity, the FDA is considering standardizing stability testing policies by adopting...

10 CFR 34.27 - Leak testing and replacement of sealed sources.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 1 2014-01-01 2014-01-01 false Leak testing and replacement of sealed sources. 34.27 Section 34.27 Energy NUCLEAR REGULATORY COMMISSION LICENSES FOR INDUSTRIAL RADIOGRAPHY AND RADIATION SAFETY REQUIREMENTS FOR INDUSTRIAL RADIOGRAPHIC OPERATIONS Equipment § 34.27 Leak testing and replacement...

10 CFR 34.27 - Leak testing and replacement of sealed sources.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 1 2011-01-01 2011-01-01 false Leak testing and replacement of sealed sources. 34.27 Section 34.27 Energy NUCLEAR REGULATORY COMMISSION LICENSES FOR INDUSTRIAL RADIOGRAPHY AND RADIATION SAFETY REQUIREMENTS FOR INDUSTRIAL RADIOGRAPHIC OPERATIONS Equipment § 34.27 Leak testing and replacement...

10 CFR 34.27 - Leak testing and replacement of sealed sources.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 1 2010-01-01 2010-01-01 false Leak testing and replacement of sealed sources. 34.27 Section 34.27 Energy NUCLEAR REGULATORY COMMISSION LICENSES FOR INDUSTRIAL RADIOGRAPHY AND RADIATION SAFETY REQUIREMENTS FOR INDUSTRIAL RADIOGRAPHIC OPERATIONS Equipment § 34.27 Leak testing and replacement...

10 CFR 34.27 - Leak testing and replacement of sealed sources.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 1 2012-01-01 2012-01-01 false Leak testing and replacement of sealed sources. 34.27 Section 34.27 Energy NUCLEAR REGULATORY COMMISSION LICENSES FOR INDUSTRIAL RADIOGRAPHY AND RADIATION SAFETY REQUIREMENTS FOR INDUSTRIAL RADIOGRAPHIC OPERATIONS Equipment § 34.27 Leak testing and replacement...

10 CFR 34.27 - Leak testing and replacement of sealed sources.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 1 2013-01-01 2013-01-01 false Leak testing and replacement of sealed sources. 34.27 Section 34.27 Energy NUCLEAR REGULATORY COMMISSION LICENSES FOR INDUSTRIAL RADIOGRAPHY AND RADIATION SAFETY REQUIREMENTS FOR INDUSTRIAL RADIOGRAPHIC OPERATIONS Equipment § 34.27 Leak testing and replacement...

Evolutionary engineering of industrial microorganisms-strategies and applications.

PubMed

Zhu, Zhengming; Zhang, Juan; Ji, Xiaomei; Fang, Zhen; Wu, Zhimeng; Chen, Jian; Du, Guocheng

2018-06-01

Microbial cells have been widely used in the industry to obtain various biochemical products, and evolutionary engineering is a common method in biological research to improve their traits, such as high environmental tolerance and improvement of product yield. To obtain better integrate functions of microbial cells, evolutionary engineering combined with other biotechnologies have attracted more attention in recent years. Classical laboratory evolution has been proven effective to letting more beneficial mutations occur in different genes but also has some inherent limitations such as a long evolutionary period and uncontrolled mutation frequencies. However, recent studies showed that some new strategies may gradually overcome these limitations. In this review, we summarize the evolutionary strategies commonly used in industrial microorganisms and discuss the combination of evolutionary engineering with other biotechnologies such as systems biology and inverse metabolic engineering. Finally, we prospect the importance and application prospect of evolutionary engineering as a powerful tool especially in optimization of industrial microbial cell factories.

Promoting the use of crumb rubber concrete in developing countries.

PubMed

Batayneh, Malek K; Marie, Iqbal; Asi, Ibrahim

2008-11-01

The use of accumulated waste materials in third world countries is still in its early phases. It will take courage for contractors and others in the construction industry to recycle selected types of waste materials in the concrete mixes. This paper addresses the recycling of rubber tires accumulated every year in Jordan to be used in concrete mixes. The main objectives of this research were to provide more scientific evidence to support the use of legislation or incentive-based schemes to promote the reuse of accumulated waste tires. This research focused on using crumb tires as a replacement for a percentage of the local fine aggregates used in the concrete mixes in Jordan. Different concrete specimens were prepared and tested in terms of uniaxial compression and splitting tension. The main variable in the mixture was the volumetric percentage of crumb tires used in the mix. The test results showed that even though the compressive strength is reduced when using the crumb tires, it can meet the strength requirements of light weight concrete. In addition, test results and observations indicated that the addition of crumb rubber to the mix has a limited effect toward reducing the workability of the mixtures. The mechanical test results demonstrated that the tested specimens of the crumb rubber concrete remained relatively intact after failure compared to the conventional concrete specimens. It is also concluded that modified concrete would contribute to the disposal of the non-decaying scrap tires, since the amount being accumulated in third world countries is creating a challenge for proper disposal. Thus, obliging authorities to invest in facilitating the use of waste tires in concrete, a fundamental material to the booming construction industry in theses countries, serves two purposes.

Mutagenicity of automobile workshop soil leachate and tobacco industry wastewater using the Ames Salmonella fluctuation and the SOS chromotests.

PubMed

Okunola, Alabi A; Babatunde, Esan E; Chinwe, Duru; Pelumi, Oyedele; Ramatu, Salihu G

2016-06-01

Environmental management of industrial solid wastes and wastewater is an important economic and environmental health problem globally. This study evaluated the mutagenic potential of automobile workshop soil-simulated leachate and tobacco wastewater using the SOS chromotest on Escherichia coli PQ37 and the Ames Salmonella fluctuation test on Salmonella typhimurium strains TA98 and TA100 without metabolic activation. Physicochemical parameters of the samples were also analyzed. The result of the Ames test showed mutagenicity of the test samples. However, the TA100 was the more responsive strain for both the simulated leachate and tobacco wastewater in terms of mutagenic index in the absence of metabolic activation. The SOS chromotest results were in agreement with those of the Ames Salmonella fluctuation test. Nevertheless, the E. coli PQ37 system was slightly more sensitive than the Salmonella assay for detecting genotoxins in the tested samples. Iron, cadmium, manganese, copper, nickel, chromium, arsenic, zinc, and lead contents analyzed in the samples were believed to play significant role in the observed mutagenicity in the microbial assays. The results of this study showed that the simulated leachate and tobacco wastewater showed strong indication of a genotoxic risk. Further studies would be required in the analytical field in order to identify and quantify other compounds not analyzed for in this study, some of which could be responsible for the observed genotoxicity. This will be necessary in order to identify the sources of toxicants and thus to take preventive and/or curative measures to limit the toxicity of these types of wastes. © The Author(s) 2014.

The NASA Dryden Flight Research Center Unmanned Aircraft System Service Capabilities

NASA Technical Reports Server (NTRS)

Bauer, Jeff

2007-01-01

Over 60 years of Unmanned Aircraft System (UAS) expertise at the National Aeronautics and Space Administration (NASA) Dryden Flight Research Center are being leveraged to provide capability and expertise to the international UAS community. The DFRC brings together technical experts, UAS, and an operational environment to provide government and industry a broad capability to conduct research, perform operations, and mature systems, sensors, and regulation. The cornerstone of this effort is the acquisition of both a Global Hawk (Northrop Grumman Corporation, Los Angeles, California) and Predator B (General Atomics Aeronautical Systems, Inc., San Diego, California) unmanned aircraft system (UAS). In addition, a test range for small UAS will allow developers to conduct research and development flights without the need to obtain approval from civil authorities. Finally, experts are available to government and industry to provide safety assessments in support of operations in civil airspace. These services will allow developers to utilize limited resources to their maximum capability in a highly competitive environment.

Process Development in the Teaching Laboratory

NASA Astrophysics Data System (ADS)

Klein, Leonard C.; Dana, Susanne M.

1998-06-01

Many experiences in high school and undergraduate laboratories are well-tested cookbook recipes that have already been designed to yield optimal results; the well-known synthesis of aspirin is such an example. In this project for advanced placement or second-year high school chemistry students, students mimic the process development in industrial laboratories by investigating the effect of varying conditions in the synthesis of aspirin. The class decides on criteria that should be explored (quantity of catalyst, temperature of reaction, etc.). The class is then divided into several teams with each team assigned a variable to study. Each team must submit a proposal describing how they will explore the variable before they start their study. After data on yield and purity has been gathered and evaluated, students discuss which method is most desirable, based on their agreed-upon criteria. This exercise provides an opportunity for students to review many topics from the course (rate of reaction, limiting reagents, Beer's Law) while participating in a cooperative exercise designed to imitate industrial process development.

Modelling safety of gantry crane operations using Petri nets.

PubMed

Singh, Karmveer; Raj, Navneet; Sahu, S K; Behera, R K; Sarkar, Sobhan; Maiti, J

2017-03-01

Being a powerful tool in modelling industrial and service operations, Petri net (PN) has been extremely used in different domains, but its application in safety study is limited. In this study, we model the gantry crane operations used for industrial activities using generalized stochastic PNs. The complete cycle of operations of the gantry crane is split into three parts namely inspection and loading, movement of load, and unloading of load. PN models are developed for all three parts and the whole system as well. The developed PN models have captured the safety issues through reachability tree. The hazardous states are identified and how they ultimately lead to some unwanted accidents is demonstrated. The possibility of falling of load and failure of hook, sling, attachment and hoist rope are identified. Possible suggestions based on the study are presented for redesign of the system. For example, mechanical stoppage of operations in case of loosely connected load, and warning system for use of wrong buttons is tested using modified models.

The effect of feed composition on anaerobic co-digestion of animal-processing by-products.

PubMed

Hidalgo, D; Martín-Marroquín, J M; Corona, F

2018-06-15

Four streams and their mixtures have been considered for anaerobic co-digestion, all of them generated during pig carcasses processing or in related industrial activities: meat flour (MF), process water (PW), pig manure (PM) and glycerin (GL). Biochemical methane potential assays were conducted at 37 °C to evaluate the effects of the substrate mix ratio on methane generation and process behavior. The results show that the co-digestion of these products favors the anaerobic fermentation process when limiting the amount of meat flour in the mixture to co-digest, which should not exceed 10%. The ratio of other tested substrates is less critical, because different mixtures reach similar values of methane generation. The presence in the mixture of process water contributes to a quick start of the digester, something very interesting when operating an industrial reactor. The analysis of the fraction digested reveals that the four analyzed streams can be, a priori, suitable for agronomic valorization once digested. Copyright © 2017. Published by Elsevier Ltd.

Magnetic moment investigation by frequency mixing techniques.

PubMed

Teliban, I; Thede, C; Chemnitz, S; Bechtold, C; Quadakkers, W J; Schütze, M; Quandt, E

2009-11-01

Gas turbines and other large industrial equipment are subjected to high-temperature oxidation and corrosion. Research and development of efficient protective coatings is the main task in the field. Also, knowledge about the depletion state of the coating during the operation time is important. To date, practical nondestructive methods for the measurement of the depletion state do not exist. By integrating magnetic phases into the coating, the condition of the coating can be determined by measuring its magnetic properties. In this paper, a new technique using frequency mixing is proposed to investigate the thickness of the coatings based on their magnetic properties. A sensor system is designed and tested on specific magnetic coatings. New approaches are proposed to overcome the dependency of the measurement on the distance between coil and sample that all noncontact techniques face. The novelty is a low cost sensor with high sensibility and selectivity which can provide very high signal-to-noise ratios. Prospects and limitations are discussed for future use of the sensor in industrial applications.

Combustion characteristics of lodge pole pine wood chips. Technical progress report No. 15, September 16, 1978-September 15, 1979

DOE Office of Scientific and Technical Information (OSTI.GOV)

Junge, D.C.

1979-09-01

Significant quantits of wood resiue fuels are presently being used in industrial steam generating facilities. Recent studies indicate that substantial additional quantities of wood residue fuels are available for energy generation in the form of steam and/or electricity. A limited data base on the combustion characteristics of wood residue fuels has resulted in the installation and operation of inefficient combustion systems for these fuels. This investigation of the combustion characteristics of wood residue fuels was undertaken to provide a data base which could be used to optimize the combustion of such fuels. Optimization of the combustion process in industrial boilersmore » serves to improve combustion efficiency and to reduce air pollutant emissions generated in the combustion process. This report presents data on the combustion characteristics of lodge pole pine wood chips. The data were obtained in a pilot scale combustion test facility at Oregon State University.« less

Traceability and Risk Analysis Strategies for Addressing Counterfeit Electronics in Supply Chains for Complex Systems.

PubMed

DiMase, Daniel; Collier, Zachary A; Carlson, Jinae; Gray, Robin B; Linkov, Igor

2016-10-01

Within the microelectronics industry, there is a growing concern regarding the introduction of counterfeit electronic parts into the supply chain. Even though this problem is widespread, there have been limited attempts to implement risk-based approaches for testing and supply chain management. Supply chain risk management tends to focus on the highly visible disruptions of the supply chain instead of the covert entrance of counterfeits; thus counterfeit risk is difficult to mitigate. This article provides an overview of the complexities of the electronics supply chain, and highlights some gaps in risk assessment practices. In particular, this article calls for enhanced traceability capabilities to track and trace parts at risk through various stages of the supply chain. Placing the focus on risk-informed decision making through the following strategies is needed, including prioritization of high-risk parts, moving beyond certificates of conformance, incentivizing best supply chain management practices, adoption of industry standards, and design and management for supply chain resilience. © 2016 Society for Risk Analysis.

Structural characterization of MAPLE deposited lipase biofilm

NASA Astrophysics Data System (ADS)

Aronne, Antonio; Ausanio, Giovanni; Bloisi, Francesco; Calabria, Raffaela; Califano, Valeria; Fanelli, Esther; Massoli, Patrizio; Vicari, Luciano R. M.

2014-11-01

Lipases (triacylglycerol ester hydrolases) are enzymes used in several industrial applications. Enzymes immobilization can be used to address key issues limiting widespread application at industrial level. Immobilization efficiency is related to the ability to preserve the native conformation of the enzyme. MAPLE (Matrix Assisted Pulsed Laser Evaporation) technique, a laser deposition procedure for treating organic/polymeric/biomaterials, was applied for the deposition of lipase enzyme in an ice matrix, using near infrared laser radiation. Microscopy analysis showed that the deposition occurred in micrometric and submicrometric clusters with a wide size distribution. AFM imaging showed that inter-cluster regions are uniformly covered with smaller aggregates of nanometric size. Fourier transform infrared spectroscopy was used for both recognizing the deposited material and analyzing its secondary structure. Results showed that the protein underwent reversible self-association during the deposition process. Actually, preliminary tests of MAPLE deposited lipase used for soybean oil transesterification with isopropyl alcohol followed by gas chromatography-mass spectrometry gave results consistent with undamaged deposition of lipase.

High-power industrial pulsed CO2 laser

NASA Astrophysics Data System (ADS)

Levin, G. I.

1983-12-01

The use of a pulsed TEA CO2 laser (with maximum average power 1.0 kW; maximum pulse energy 3.5 J; repetition frequency 400-600 Hz; half-width pulse duration 15 microsec; circular-coupling-aperture beam diameter 6, 8, or 12 mm; and beam divergence 10 mrad) in industrial welding applications is investigated experimentally in carbon and stainless steels, Zr, Ti, and Ni of various thicknesses. The power required to melt the metals is found to be about 120-200 W/sq cm, or 5-6 times less than that for CW lasers. It is shown that deep narrow-seam welds with mechanical properties identical to those of the bulk metal can be obtained with little or no intercrystalline corrosion or thermal distortion of the surrounding area. Disadvantages such as the 65-dB noise level, low welding speed, formation of an overlap at the top and a crater at the bottom of the weld, and root porosity are considered the primary limitations on the applicability of the device tested.

Development of Quadratic Programming Algorithm Based on Interior Point Method with Estimation Mechanism of Active Constraints

NASA Astrophysics Data System (ADS)

Hashimoto, Hiroyuki; Takaguchi, Yusuke; Nakamura, Shizuka

Instability of calculation process and increase of calculation time caused by increasing size of continuous optimization problem remain the major issues to be solved to apply the technique to practical industrial systems. This paper proposes an enhanced quadratic programming algorithm based on interior point method mainly for improvement of calculation stability. The proposed method has dynamic estimation mechanism of active constraints on variables, which fixes the variables getting closer to the upper/lower limit on them and afterwards releases the fixed ones as needed during the optimization process. It is considered as algorithm-level integration of the solution strategy of active-set method into the interior point method framework. We describe some numerical results on commonly-used bench-mark problems called “CUTEr” to show the effectiveness of the proposed method. Furthermore, the test results on large-sized ELD problem (Economic Load Dispatching problems in electric power supply scheduling) are also described as a practical industrial application.

Hot corrosion testing of Ni-based alloys and coatings in a modified Dean rig

NASA Astrophysics Data System (ADS)

Steward, Jason Reid

Gas turbine blades are designed to withstand a variety of harsh operating conditions. Although material and coating improvements are constantly administered to increase the mean time before turbine refurbishment or replacement, hot corrosion is still considered as the major life-limiting factor in many industrial and marine gas turbines. A modified Dean rig was designed and manufactured at Tennessee Technological University to simulate the accelerated hot corrosion conditions and to conduct screening tests on the new coatings on Ni-based superalloys. Uncoated Ni-based superalloys, Rene 142 and Rene 80, were tested in the modified Dean rig to establish a testing procedure for Type I hot corrosion. The influence of surface treatments on the hot corrosion resistance was then investigated. It was found that grit-blasted specimens showed inferior hot corrosion resistance than that of the polished counterpart. The Dean rig was also used to test model MCrAlY alloys, pack cementation NiAl coatings, and electro-codeposited MCrAlY coatings. Furthermore, the hot corrosion attack on the coated-specimens were also assessed using a statistical analysis approach.

Current issues in dietary acrylamide: formation, mitigation and risk assessment.

PubMed

Pedreschi, Franco; Mariotti, María Salomé; Granby, Kit

2014-01-15

Acrylamide (AA) is known as a neurotoxin in humans and it is classified as a probable human carcinogen by the International Agency of Research on Cancer. AA is produced as by-product of the Maillard reaction in starchy foods processed at high temperatures (>120 °C). This review includes the investigation of AA precursors, mechanisms of AA formation and AA mitigation technologies in potato, cereal and coffee products. Additionally, most relevant issues of AA risk assessment are discussed. New technologies tested from laboratory to industrial scale face, as a major challenge, the reduction of AA content of browned food, while still maintaining its attractive organoleptic properties. Reducing sugars such as glucose and fructose are the major contributors to AA in potato-based products. On the other hand, the limiting substrate of AA formation in cereals and coffee is the free amino acid asparagine. For some products the addition of glycine or asparaginase reduces AA formation during baking. Since, for potatoes, the limiting substrate is reducing sugars, increases in sugar content in potatoes during storage then introduce some difficulties and potentially quite large variations in the AA content of the final product. Sugars in potatoes may be reduced by blanching. Levels of AA in different foods show large variations and no general upper limit is easily applicable, since some formation will always occur. Current policy is that practical measures should be taken voluntarily to reduce AA formation in vulnerable foods since AA is considered a health risk at the concentrations found in foods. © 2013 Society of Chemical Industry.

Sexually transmitted infection testing of adult film performers: is disease being missed?

PubMed

Rodriguez-Hart, Cristina; Chitale, Rohit A; Rigg, Robert; Goldstein, Binh Y; Kerndt, Peter R; Tavrow, Paula

2012-12-01

Undiagnosed sexually transmitted infections (STIs) may be common in the adult film industry because performers frequently engage in unprotected oral and anal intercourse, STIs are often asymptomatic, and the industry relies on urine-based testing. Between mid-May and mid-September 2010, a consecutive sample of adult film industry performers recruited from a clinic in Los Angeles, California, that provides medical care to performers was offered oropharyngeal, rectal, and urogenital testing for Gonorrhea, and rectal and urogenital testing for Chlamydia. During the 4-month study period, 168 participants were enrolled: 112 (67%) were female and 56 (33%) were male. Of the 47 (28%) who tested positive for Gonorrhea and/or Chlamydia, 11 (23%) cases would not have been detected through urogenital testing alone. Gonorrhea was the most common STI (42/168; 25%) and the oropharynx the most common site of infection (37/47; 79%). Thirty-five (95%) oropharyngeal and 21 (91%) rectal infections were asymptomatic. Few participants reported using condoms consistently while performing or with their personal sex partners. Adult film industry performers had a high burden of STIs. Undiagnosed asymptomatic rectal and oropharyngeal STIs were common and are likely reservoirs for transmission to sexual partners inside and outside the workplace. Performers should be tested at all anatomical sites irrespective of symptoms, and condom use should be enforced to protect workers in this industry.

The Search for the Holy Grail: Content-Referenced Score Interpretations from Large-Scale Tests

ERIC Educational Resources Information Center

Marion, Scott F.

2015-01-01

The measurement industry is in crisis. The public outcry against "over testing" and the opt-out movement are symptoms of a larger sociopolitical battle being fought over Common Core, teacher evaluation, federal intrusion, and a host of other issues, but much of the vitriol is directed at the tests and the testing industry. If we, as…

Changing interactions between physician trainees and the pharmaceutical industry: a national survey.

PubMed

Austad, Kirsten E; Avorn, Jerry; Franklin, Jessica M; Kowal, Mary K; Campbell, Eric G; Kesselheim, Aaron S

2013-08-01

Increasingly, medical school policies limit pharmaceutical representatives' access to students and gifts from drugmakers, but little is known about how these policies affect student attitudes toward industry. To assess interactions between trainees and the pharmaceutical industry, and to determine whether learning environment characteristics influence students' practices and attitudes. We conducted a cross-sectional survey with a nationally-representative sample of first- and fourth-year medical students and third-year residents, stratified by medical school, including ≥ 14 randomly selected trainees at each level per school. We measured frequency of industry interactions and attitudes regarding how such interactions affect medical training and the profession. Chi-squared tests assessed bivariate linear trend, and hierarchical logistic regression models were fitted to assess associations between trainees' attitudes and their schools' National Institutes of Health (NIH) funding levels and American Medical Student Association (AMSA) PharmFree Scorecard grades reflecting industry-related conflict of interest policies. Among 1,610 student (49.3 % response rate) and 739 resident (43.1 %) respondents, industry-sponsored gifts were common, rising from 33.0 % (first-year students) to 56.8 % (fourth-year students) and 54 % (residents) (p < 0.001). These gifts included meals outside the hospital (reported by 5 % first-year students, 13.4 % fourth-year students, 27.5 % residents (p < 0.001)) and free drug samples (reported by 7.4 % first-year students, 14.1 % fourth-year students, 14.3 % residents (p < 0.001)). The perception that industry interactions lead to bias was prevalent, but the belief that physicians receive valuable education through these interactions increased (64.1 % to 67.5 % to 79.8 %, p < 0.001). Students in schools receiving more NIH funding reported industry gifts less often (OR = 0.51, 95 % CI: 0.38-0.68, p < 0.001), but the strength of institutional conflict of interest policies was not associated with this variable. Despite recent policy changes, a substantial number of trainees continue to receive gifts from pharmaceutical representatives. We found no relation between these outcomes and a school's policies concerning interactions with industry.

28 CFR 345.65 - Inmate medical work limitation.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 28 Judicial Administration 2 2012-07-01 2012-07-01 false Inmate medical work limitation. 345.65... PRISON INDUSTRIES (FPI) INMATE WORK PROGRAMS Inmate Pay and Benefits § 345.65 Inmate medical work limitation. In addition to any prior illnesses or injuries, medical limitations also include any illness or...

28 CFR 345.65 - Inmate medical work limitation.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 28 Judicial Administration 2 2013-07-01 2013-07-01 false Inmate medical work limitation. 345.65... PRISON INDUSTRIES (FPI) INMATE WORK PROGRAMS Inmate Pay and Benefits § 345.65 Inmate medical work limitation. In addition to any prior illnesses or injuries, medical limitations also include any illness or...

75 FR 72739 - Compliance Testing Procedures: Correction Factor for Room Air Conditioners

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-26

... industry practices or consensus body testing standards which have been superseded by standards which are... accurate. With these facts in mind, DOE compliance enforcement forbearance, or an industry-wide waiver or...

78 FR 60965 - Self-Regulatory Organizations; EDGA Exchange, Inc.; Notice of Filing and Immediate Effectiveness...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-02

... of Regulation NMS under the Act (the ``Limit Up- Limit Down Plan'' or the ``Plan'').\\7\\ The Exchange... Erroneous Rule should continue while the industry gains further experience operating the Limit Up-Limit Down... FR 33498 (June 6, 2012) (the ``Limit Up-Limit Down Release''); see also Exchange Rule 11.13(i). The...

78 FR 60973 - Self-Regulatory Organizations; BATS Exchange, Inc.; Notice of Filing and Immediate Effectiveness...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-02

... of Regulation NMS under the Act (the ``Limit Up- Limit Down Plan'' or the ``Plan'').\\9\\ The Exchange... Erroneous Rule should continue while the industry gains further experience operating the Limit Up-Limit Down... 33498 (June 6, 2012) (the ``Limit Up-Limit Down Release''); see also BATS Rule 11.17(h). The Exchange...

78 FR 60950 - Self-Regulatory Organizations; NYSE Arca, Inc.; Notice of Filing and Immediate Effectiveness of...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-02

... Regulation NMS under the Act (the ``Limit Up-Limit Down Plan'' or the ``Plan'').\\7\\ The [[Page 60951....10 should continue while the industry gains further experience operating the Limit Up-Limit Down Plan... (May 31, 2012), 77 FR 33498 (June 6, 2012) (the ``Limit Up-Limit Down Release''); see also Rule 7.10(i...

78 FR 60943 - Self-Regulatory Organizations; NYSE MKT LLC; Notice of Filing and Immediate Effectiveness of...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-02

... under the Act (the ``Limit Up- Limit Down Plan'' or the ``Plan'').\\7\\ The Exchange believes the benefits... continue while the industry gains further experience operating the Limit Up-Limit Down Plan. \\5\\ See... 33498 (June 6, 2012) (the ``Limit Up-Limit Down Release''); see also Rule 128(i)--Equities. The Exchange...

Applications of aerospace technology in industry: A technology transfer profile, nondestructive testing

NASA Technical Reports Server (NTRS)

1972-01-01

The development of nondestructive testing procedures by NASA and the transfer of nondestructive testing to technology to civilian industry are discussed. The subjects presented are: (1) an overview of the nondestructive testing field, (2) NASA contributions to the field of nondestructive testing, (3) dissemination of NASA contributions, and (4) a transfer profile. Attachments are included which provide a brief description of common nondestructive testing methods and summarize the technology transfer reports involving NASA generated nondestructive testing technology.

Issues associated with the use of Yoshida nonlinear isotropic/kinematic hardening material model in Advanced High Strength Steels

NASA Astrophysics Data System (ADS)

Shi, Ming F.; Zhang, Li; Zhu, Xinhai

2016-08-01

The Yoshida nonlinear isotropic/kinematic hardening material model is often selected in forming simulations where an accurate springback prediction is required. Many successful application cases in the industrial scale automotive components using advanced high strength steels (AHSS) have been reported to give better springback predictions. Several issues have been raised recently in the use of the model for higher strength AHSS including the use of two C vs. one C material parameters in the Armstrong and Frederick model (AF model), the original Yoshida model vs. Original Yoshida model with modified hardening law, and constant Young's Modulus vs. decayed Young's Modulus as a function of plastic strain. In this paper, an industrial scale automotive component using 980 MPa strength materials is selected to study the effect of two C and one C material parameters in the AF model on both forming and springback prediction using the Yoshida model with and without the modified hardening law. The effect of decayed Young's Modulus on the springback prediction for AHSS is also evaluated. In addition, the limitations of the material parameters determined from tension and compression tests without multiple cycle tests are also discussed for components undergoing several bending and unbending deformations.

Carbon Structure Hazard Control

NASA Technical Reports Server (NTRS)

Yoder, Tommy; Greene, Ben; Porter, Alan

2015-01-01

Carbon composite structures are widely used in virtually all advanced technology industries for a multitude of applications. The high strength-to-weight ratio and resistance to aggressive service environments make them highly desirable. Automotive, aerospace, and petroleum industries extensively use, and will continue to use, this enabling technology. As a result of this broad range of use, field and test personnel are increasingly exposed to hazards associated with these structures. No single published document exists to address the hazards and make recommendations for the hazard controls required for the different exposure possibilities from damaged structures including airborne fibers, fly, and dust. The potential for personnel exposure varies depending on the application or manipulation of the structure. The effect of exposure to carbon hazards is not limited to personnel, protection of electronics and mechanical equipment must be considered as well. The various exposure opportunities defined in this document include pre-manufacturing fly and dust, the cured structure, manufacturing/machining, post-event cleanup, and post-event test and/or evaluation. Hazard control is defined as it is applicable or applied for the specific exposure opportunity. The carbon exposure hazard includes fly, dust, fiber (cured/uncured), and matrix vapor/thermal decomposition products. By using the recommendations in this document, a high level of confidence can be assured for the protection of personnel and equipment.

Development of narrow-band fluorescence index for the detection of aflatoxin contaminated corn

NASA Astrophysics Data System (ADS)

Yao, Haibo; Hruska, Zuzana; Kincaid, Russell; Ononye, Ambrose; Brown, Robert L.; Bhatnagar, Deepak; Cleveland, Thomas E.

2011-06-01

Aflatoxin is produced by the fungus Aspergillus flavus when the fungus invades developing corn kernels. Because of its potent toxicity, the levels of aflatoxin are regulated by the Food and Drug Administration (FDA) in the US, allowing 20 ppb (parts per billion) limits in food, and feed intended for interstate commerce. Currently, aflatoxin detection and quantification methods are based on analytical tests. These tests require the destruction of samples, can be costly and time consuming, and often rely on less than desirable sampling techniques. Thus, the ability to detect aflatoxin in a rapid, non-invasive way is crucial to the corn industry in particular. This paper described how narrow-band fluorescence indices were developed for aflatoxin contamination detection based on single corn kernel samples. The indices were based on two bands extracted from full wavelength fluorescence hyperspectral imagery. The two band results were later applied to two large sample experiments with 25 g and 1 kg of corn per sample. The detection accuracies were 85% and 95% when 100 ppb threshold was used. Since the data acquisition period is significantly lower for several image bands than for full wavelength hyperspectral data, this study would be helpful in the development of real-time detection instrumentation for the corn industry.

Drug development and nonclinical to clinical translational databases: past and current efforts.

PubMed

Monticello, Thomas M

2015-01-01

The International Consortium for Innovation and Quality (IQ) in Pharmaceutical Development is a science-focused organization of pharmaceutical and biotechnology companies. The mission of the Preclinical Safety Leadership Group (DruSafe) of the IQ is to advance science-based standards for nonclinical development of pharmaceutical products and to promote high-quality and effective nonclinical safety testing that can enable human risk assessment. DruSafe is creating an industry-wide database to determine the accuracy with which the interpretation of nonclinical safety assessments in animal models correctly predicts human risk in the early clinical development of biopharmaceuticals. This initiative aligns with the 2011 Food and Drug Administration strategic plan to advance regulatory science and modernize toxicology to enhance product safety. Although similar in concept to the initial industry-wide concordance data set conducted by International Life Sciences Institute's Health and Environmental Sciences Institute (HESI/ILSI), the DruSafe database will proactively track concordance, include exposure data and large and small molecules, and will continue to expand with longer duration nonclinical and clinical study comparisons. The output from this work will help identify actual human and animal adverse event data to define both the reliability and the potential limitations of nonclinical data and testing paradigms in predicting human safety in phase 1 clinical trials. © 2014 by The Author(s).

Duty hours and incidents in flight among commercial airline pilots.

PubMed

O'Hagan, Anna Donnla; Issartel, Johann; Fletcher, Richard; Warrington, Giles

2016-01-01

Working long duty hours has often been associated with increased risk of incidents and accidents in transport industries. Despite this, information regarding the intermediate relationship between duty hours and incident risk is limited. This study aimed to test a work hours/incident model to identify the interplay of factors contributing to incidents within the aviation industry. Nine hundred and fifty-four European-registered commercial airline pilots completed a 30-item survey investigating self-report attitudes and experiences of fatigue. Path analysis was used to test the proposed model. The fit indices indicated this to be a good fit model (χ(2) = 11.066, df = 5, p = 0.05; Comparative Fit Index = 0.991; Normed Fit Index = 0.984; Tucker-Lewis Index = 0.962; Root Mean Square of Approximation = 0.036). Highly significant relationships were identified between duty hours and sleep disturbance (r = 0.18, p < 0.001), sleep disturbance and fatigue in the cockpit (r = 0.40, p < 0.001), and fatigue in the cockpit and microsleeps in the cockpit (r = 0.43, p < 0.001). A critical pathway from duty hours through to self-reported incidents in flight was identified. Further investigation employing both objective and subjective measures of sleep and fatigue is needed.

Effects of Lactobacillus acidophilus supplementation on growth performance, nutrient digestibility, fecal microbial and noxious gas emission in weaning pigs.

PubMed

Lan, Ruixia; Koo, Jinmo; Kim, Inho

2017-03-01

Antibiotics used as growth promoters in livestock have been banned in the European Union since 2006. Antibiotics alternatives have focused on probiotics, such as Lactobacillus acidophilus. The concentration of L. acidophilus is considered crucial for obtaining the desired effects. However, limited studies have been conducted to test the dose-dependent effects of L. acidophilus. Therefore, the present study aimed to test the dose-dependent effects of L. acidophilus on growth performance, nutrient digestibility, fecal microbial flora and fecal noxious gas emission in weaning pigs. Lactobacillus acidophilus supplementation increased (P < 0.05) average daily gain, average daily feed intake, apparent nutrient digestibility of dry matter, nitrogen and gross energy, and Lactobacillus counts compared to the basal diet treatment, and a linear effect (P < 0.05) was observed on those criteria. Escherichia coli counts and NH 3 emission were decreased (P < 0.05) by L. acidophilus supplementation, and a linear effect (P < 0.05) was observed on E. coli counts. These results suggest that L. acidophilus could be used as an antibiotic alternative by improving growth performance, nutrient digestibility and gut balance (i.e. increased Lactobacillus counts and decreased E. coli counts), and decreasing NH3 emission, of weaning pigs. © 2016 Society of Chemical Industry. © 2016 Society of Chemical Industry.

Corrosion of low carbon steel by microorganisms from the 'pigging' operation debris in water injection pipelines.

PubMed

Cote, Claudia; Rosas, Omar; Sztyler, Magdalena; Doma, Jemimah; Beech, Iwona; Basseguy, Régine

2014-06-01

Present in all environments, microorganisms develop biofilms adjacent to the metallic structures creating corrosion conditions which may cause production failures that are of great economic impact to the industry. The most common practice in the oil and gas industry to annihilate these biofilms is the mechanical cleaning known as "pigging". In the present work, microorganisms from the "pigging" operation debris are tested biologically and electrochemically to analyse their effect on the corrosion of carbon steel. Results in the presence of bacteria display the formation of black corrosion products allegedly FeS and a sudden increase (more than 400mV) of the corrosion potential of electrode immersed in artificial seawater or in field water (produced water mixed with aquifer seawater). Impedance tests provided information about the mechanisms of the interface carbon steel/bacteria depending on the medium used: mass transfer limitation in artificial seawater was observed whereas that in field water was only charge transfer phenomenon. Denaturing Gradient Gel Electrophoresis (DGGE) results proved that bacterial diversity decreased when cultivating the debris in the media used and suggested that the bacteria involved in the whole set of results are mainly sulphate reducing bacteria (SRB) and some other bacteria that make part of the taxonomic order Clostridiales. Copyright © 2013 Elsevier B.V. All rights reserved.

Assessment and evaluation of noise controls on roof bolting equipment and a method for predicting sound pressure levels in underground coal mining

NASA Astrophysics Data System (ADS)

Matetic, Rudy J.

Over-exposure to noise remains a widespread and serious health hazard in the U.S. mining industries despite 25 years of regulation. Every day, 80% of the nation's miners go to work in an environment where the time weighted average (TWA) noise level exceeds 85 dBA and more than 25% of the miners are exposed to a TWA noise level that exceeds 90 dBA, the permissible exposure limit (PEL). Additionally, MSHA coal noise sample data collected from 2000 to 2002 show that 65% of the equipment whose operators exceeded 100% noise dosage comprise only seven different types of machines; auger miners, bulldozers, continuous miners, front end loaders, roof bolters, shuttle cars (electric), and trucks. In addition, the MSHA data indicate that the roof bolter is third among all the equipment and second among equipment in underground coal whose operators exceed 100% dosage. A research program was implemented to: (1) determine, characterize and to measure sound power levels radiated by a roof bolting machine during differing drilling configurations (thrust, rotational speed, penetration rate, etc.) and utilizing differing types of drilling methods in high compressive strength rock media (>20,000 psi). The research approach characterized the sound power level results from laboratory testing and provided the mining industry with empirical data relative to utilizing differing noise control technologies (drilling configurations and types of drilling methods) in reducing sound power level emissions on a roof bolting machine; (2) distinguish and correlate the empirical data into one, statistically valid, equation, in which, provided the mining industry with a tool to predict overall sound power levels of a roof bolting machine given any type of drilling configuration and drilling method utilized in industry; (3) provided the mining industry with several approaches to predict or determine sound pressure levels in an underground coal mine utilizing laboratory test results from a roof bolting machine and (4) described a method for determining an operators' noise dosage of a roof bolting machine utilizing predicted or determined sound pressure levels.

Sister-chromatid exchanges and cell-cycle kinetics in the lymphocytes of workers occupationally exposed to a chemical mixture in the tyre industry.

PubMed

Sasiadek, M

1993-08-01

Cytogenetic studies of clinically healthy workers employed in the rubber industry showed an increase in chromosome aberrations (CAs), sister-chromatid exchanges (SCEs) and a decrease in proliferation indices (PIs). The aim of the present study was to establish, using the SCE and PI tests, genotoxic effects of hazardous chemicals in the rubber industry. An increase in mean SCEs in the lymphocytes of vulcanizers as compared to controls was observed. Since the PI in the exposed group was insignificantly decreased as compared to the controls, it could be concluded that the SCE test is the most sensitive cytogenetic test for the detection of a genotoxic effect of chemicals in the rubber industry. There was no evidence in the present study that the genotoxic effect of chemicals in the rubber industry was enhanced by cigarette smoking.

Sexually transmitted infection (STI) testing among young oil and gas workers: the need for innovative, place-based approaches to STI control.

PubMed

Goldenberg, Shira M; Shoveller, Jean A; Ostry, Aleck C; Koehoorn, Mieke

2008-01-01

Northeastern British Columbia is undergoing rapid in-migration of young, primarily male workers in response to the "boom" in the oil/gas industries. Accompanying the boom is a rise in Chlamydia rates among youth, which exceed the provincial average by 22%. STI testing reduces the disease burden, contributing to STI prevention. 1) To document youths' perceptions regarding the socio-cultural and structural forces that affect young oil/gas workers' access to STI testing; 2) to gather service providers' perspectives on sexual health service delivery for workers; and 3) to develop recommendations to improve the accessibility of STI testing. We conducted ethnographic fieldwork (8 weeks) in a remote oil/gas community, including in-depth interviews with 25 young people (ages 15-25) and 14 health and social service providers. Participants identified limited opportunities to access testing, geographic isolation, and 'rigger' culture as three key categories inhibiting STI testing among oil/gas Workers. These results suggest the need for place-based approaches to STI control. Innovative outreach strategies are suggested to address oil/gas workers' needs, including a locally tailored STI awareness campaign, condom distribution, expanded clinic hours, and onsite STI testing.

Thermo-magneto-elastoplastic coupling model of metal magnetic memory testing method for ferromagnetic materials

NASA Astrophysics Data System (ADS)

Shi, Pengpeng; Zhang, Pengcheng; Jin, Ke; Chen, Zhenmao; Zheng, Xiaojing

2018-04-01

Metal magnetic memory (MMM) testing (also known as micro-magnetic testing) is a new non-destructive electromagnetic testing method that can diagnose ferromagnetic materials at an early stage by measuring the MMM signal directly on the material surface. Previous experiments have shown that many factors affect MMM signals, in particular, the temperature, the elastoplastic state, and the complex environmental magnetic field. However, the fact that there have been only a few studies of either how these factors affect the signals or the physical coupling mechanisms among them seriously limits the industrial applications of MMM testing. In this paper, a nonlinear constitutive relation for a ferromagnetic material considering the influences of temperature and elastoplastic state is established under a weak magnetic field and is used to establish a nonlinear thermo-magneto-elastoplastic coupling model of MMM testing. Comparing with experimental data verifies that the proposed theoretical model can accurately describe the thermo-magneto-elastoplastic coupling influence on MMM signals. The proposed theoretical model can predict the MMM signals in a complex environment and so is expected to provide a theoretical basis for improving the degree of quantification in MMM testing.

40 CFR 63.7500 - What emission limits, work practice standards, and operating limits must I meet?

Code of Federal Regulations, 2010 CFR

2010-07-01

... Industrial, Commercial, and Institutional Boilers and Process Heaters Emission Limits and Work Practice... emission limit and work practice standard in Table 1 to this subpart that applies to your boiler or process... 40 Protection of Environment 13 2010-07-01 2010-07-01 false What emission limits, work practice...

Progress in standoff surface contaminant detector platform

NASA Astrophysics Data System (ADS)

Dupuis, Julia R.; Giblin, Jay; Dixon, John; Hensley, Joel; Mansur, David; Marinelli, William J.

2017-05-01

Progress towards the development of a longwave infrared quantum cascade laser (QLC) based standoff surface contaminant detection platform is presented. The detection platform utilizes reflectance spectroscopy with application to optically thick and thin materials including solid and liquid phase chemical warfare agents, toxic industrial chemicals and materials, and explosives. The platform employs an ensemble of broadband QCLs with a spectrally selective detector to interrogate target surfaces at 10s of m standoff. A version of the Adaptive Cosine Estimator (ACE) featuring class based screening is used for detection and discrimination in high clutter environments. Detection limits approaching 0.1 μg/cm2 are projected through speckle reduction methods enabling detector noise limited performance. The design, build, and validation of a breadboard version of the QCL-based surface contaminant detector are discussed. Functional test results specific to the QCL illuminator are presented with specific emphasis on speckle reduction.

Texture developed during deformation of Transformation Induced Plasticity (TRIP) steels

NASA Astrophysics Data System (ADS)

Bhargava, M.; Shanta, C.; Asim, T.; Sushil, M.

2015-04-01

Automotive industry is currently focusing on using advanced high strength steels (AHSS) due to its high strength and formability for closure applications. Transformation Induced Plasticity (TRIP) steel is promising material for this application among other AHSS. The present work is focused on the microstructure development during deformation of TRIP steel sheets. To mimic complex strain path condition during forming of automotive body, Limit Dome Height (LDH) tests were conducted and samples were deformed in servo hydraulic press to find the different strain path. FEM Simulations were done to predict different strain path diagrams and compared with experimental results. There is a significant difference between experimental and simulation results as the existing material models are not applicable for TRIP steels. Micro texture studies were performed on the samples using EBSD and X-RD techniques. It was observed that austenite is transformed to martensite and texture developed during deformation had strong impact on limit strain and strain path.

ULTRA-SHARP solution of the Smith-Hutton problem

NASA Technical Reports Server (NTRS)

Leonard, B. P.; Mokhtari, Simin

1992-01-01

Highly convective scalar transport involving near-discontinuities and strong streamline curvature was addressed in a paper by Smith and Hutton in 1982, comparing several different convection schemes applied to a specially devised test problem. First order methods showed significant artificial diffusion, whereas higher order methods gave less smearing but had a tendency to overshoot and oscillate. Perhaps because unphysical oscillations are more obvious than unphysical smearing, the intervening period has seen a rise in popularity of low order artificially diffusive schemes, especially in the numerical heat transfer industry. The present paper describes an alternate strategy of using non-artificially diffusive high order methods, while maintaining strictly monotonic transitions through the use of simple flux limited constraints. Limited third order upwinding is usually found to be the most cost effective basic convection scheme. Tighter resolution of discontinuities can be obtained at little additional cost by using automatic adaptive stencil expansion to higher order in local regions, as needed.

Quality and safety attributes of afghan raisins before and after processing

PubMed Central

McCoy, Stacy; Chang, Jun Won; McNamara, Kevin T; Oliver, Haley F; Deering, Amanda J

2015-01-01

Raisins are an important export commodity for Afghanistan; however, Afghan packers are unable to export to markets seeking high-quality products due to limited knowledge regarding their quality and safety. To evaluate this, Afghan raisin samples from pre-, semi-, and postprocessed raisins were obtained from a raisin packer in Kabul, Afghanistan. The raisins were analyzed and compared to U.S. standards for processed raisins. The samples tested did not meet U.S. industry standards for embedded sand and pieces of stem, total soluble solids, and titratable acidity. The Afghan raisins did meet or exceed U.S. Grade A standard for the number of cap-stems, percent damaged, crystallization levels, moisture content, and color. Following processing, the number of total aerobic bacteria, yeasts, molds, and total coliforms were within the acceptable limits. Although quality issues are present in the Afghan raisins, the process used to clean the raisins is suitable to maintain food safety standards. PMID:25650241

A Historical and Economic Perspective on Sir John Charnley, Chas F. Thackray Limited, and the Early Arthroplasty Industry

PubMed Central

Gomez, Pablo F; Morcuende, Jose A

2005-01-01

In the 1960s, Sir John Charnley pioneered modern total hip arthroplasty (THA) and spent the next two decades refining all aspects of the procedure, working with the commercial firm of Chas F. Thackray Limited, now a subsidiary of DePuy Orthopaedics, a Johnson and Johnson Company. We review here that relationship, in light of the complex relationships today that exist among industry, researchers, surgeons, and the public. PMID:16089068

Afghanistans Oil, Gas, and Minerals Industries: $488 Million in U.S. Efforts Show Limited Progress Overall, and Challenges Prevent Further Investment and Growth

DTIC Science & Technology

2016-01-01

488 Million in U.S. Efforts Show Limited Progress Overall, and Challenges Prevent Further Investment and Growth SIGAR 16-11-AR/Afghanistan’s...of revenue for the Afghan government. WHAT SIGAR FOUND Most TFBSO and USAID assistance to Afghanistan’s extractive industries has been directed ...toward developing capacity at the MoMP and its component organizations, and toward making regulatory reforms to attract private sector investment

20 CFR 216.13 - Regular current connection test.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 20 Employees' Benefits 1 2011-04-01 2011-04-01 false Regular current connection test. 216.13... ELIGIBILITY FOR AN ANNUITY Current Connection With the Railroad Industry § 216.13 Regular current connection test. An employee has a current connection with the railroad industry if he or she meets one of the...

20 CFR 216.13 - Regular current connection test.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 20 Employees' Benefits 1 2010-04-01 2010-04-01 false Regular current connection test. 216.13... ELIGIBILITY FOR AN ANNUITY Current Connection With the Railroad Industry § 216.13 Regular current connection test. An employee has a current connection with the railroad industry if he or she meets one of the...

The European system for the control of the safety of food-contact materials needs restructuring: a review and outlook for discussion.

PubMed

Grob, Koni

2017-09-01

The present European system to assure the safety of migrates from food-contact materials (FCMs) needs improvement. It is proposed to implement better the self-control by the producers through improved official control and more attractive listing of approved substances and materials (the latter being subject of another discussion paper). The initial concept of a positive list for the substances used, a limit for the overall migration and regulation of compliance testing was recognised as insufficient long ago, as it does not properly cover reaction products (including oligomers) and impurities. It also turned out to be unrealistic to cover all 17 types of FCMs owing to lack of resources by the authorities. Therefore, European Union legislation shifted the focus to the compliance work carried out by the business operators (in-house documentation and declaration of compliance). However, this approach has not been properly implemented. This is partly due to lack or unsuccessful control by authorities. A suitable structure of this control still needs to be built. It is proposed that specialised document-collection centres working with dedicated tools harmonised throughout Europe be created. Further, since most migrating substances are not listed, the toxicological evaluation reported by industry must be checked by risk-assessment authorities. Finally, effective and harmonised measures are needed to react in case of non-compliance. The currently large gap between the legal requirements and reality must be bridged by introducing flexibility: authorised work plans by industry are proposed. It is also proposed to encourage certified private institutes to approve compliance work, driven by the attractive listing of approved materials and exploiting market forces. In the long run, the focus of the authorities might change from evaluating the substances used and regulating migration testing to the evaluation of the compliance work performed by industry, which means moving from legislation supporting industry towards checking self-control.

Octylisothiazolinone, an additional cause of allergic contact dermatitis caused by leather: case series and potential implications for the study of cross-reactivity with methylisothiazolinone.

PubMed

Aerts, Olivier; Meert, Hans; Romaen, Elien; Leysen, Julie; Matthieu, Lucretia; Apers, Sandra; Lambert, Julien; Goossens, An

2016-11-01

Octylisothiazolinone (OIT) is used as an antifungal agent by the leather industry. To show sensitization to OIT from leather, and to highlight the potential implications when cross-reactivity between OIT and methylisothiazolinone (MI) is studied. Two patients with allergic contact dermatitis caused by a leather belt and shoes, respectively, were patch tested with methylchloroisothiazolinone (MCI)/MI, MI, MCI, OIT, and benzisothiazolinone (BIT). High-performance liquid chromatography with ultraviolet detection (HPLC-UV) was used to detect isothiazolinone derivatives in leather goods. Additionally, files of OIT-sensitized patients, observed at the KU Leuven department during the period 1990-2015, were retrospectively analysed. Both patients had been primarily sensitized to OIT, but the diagnosis in one of them could be achieved only when a higher patch test concentration of OIT (1000 ppm pet.) was used. HPLC-UV confirmed the presence of OIT in their leather goods. Non-relevant sensitization to MI was noted in both cases. Four additional cases of OIT sensitization from leather could be retrieved from the KU Leuven database. Non-occupational sensitization to OIT from leather may occur. Patch test concentrations of >250 ppm pet. may be necessary for diagnosis, and to show cross-reactivity with MI. Safer use limits for OIT in the leather industry may be needed. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Analysis and comparison of magnetic sheet insulation tests

NASA Astrophysics Data System (ADS)

Marion-Péra, M. C.; Kedous-Lebouc, A.; Cornut, B.; Brissonneau, P.

1994-05-01

Magnetic circuits of electrical machines are divided into coated sheets in order to limit eddy currents. The surface insulation resistance of magnetic sheets is difficult to evaluate because it depends on parameters like pressure and covers a wide range of values. Two methods of measuring insulation resistance are analyzed: the standardized 'Franklin device' and a tester developed by British Steel Electrical. Their main drawback is poor local repeatability. The Franklin method allows better quality control of industrial process because it measures only one insulating layer at a time. It also gives more accurate images of the distribution of possible defects. Nevertheless, both methods lead to similar classifications of insulation efficiency.

Modification of Upper Thread Tensioner of Sewing Machine

NASA Astrophysics Data System (ADS)

Klouček, P.; Škop, P.

Standard mechanical upper thread tensioner of sewing machines is more and more limited in use for industrial sewing machines due to increasing requests for quality and raising velocity of machines. If we omit mostly manual settings of force made only by sense, the most problematic things are influence of different friction coefficient of the different batch of threads and strong relation between thread tension and sewing machine velocity. The article describes the development focused to the elimination of the most significant disadvantages of a standard tensioner and mainly finding of new conception of the tensioner with electromagnetic brake, development and testing of its prototype.

Ultra fine grained Ti prepared by severe plastic deformation

NASA Astrophysics Data System (ADS)

Lukáč, F.; Čížek, J.; Knapp, J.; Procházka, I.; Zháňal, P.; Islamgaliev, R. K.

2016-01-01

The positron annihilation spectroscopy was employed for characterisation of defects in pure Ti with ultra fine grained (UFG) structure. UFG Ti samples were prepared by two techniques based on severe plastic deformation (SPD): (i) high pressure torsion (HPT) and (ii) equal channel angular pressing (ECAP). Although HPT is the most efficient technique for grain refinement, the size of HPT-deformed specimens is limited. On the other hand, ECAP is less efficient in grain refinement but enables to produce larger samples more suitable for industrial applications. Characterisation of defects by positron annihilation spectroscopy was accompanied by hardness testing in order to monitor the development of mechanical properties of UFG Ti.

Assessment of the benefits and impacts in the U.S. Nuclear Power Industry of hypothesized lower occupational dose limits

DOE Office of Scientific and Technical Information (OSTI.GOV)

Andersen, R.L.; Schmitt, J.F.

1995-03-01

The International Commission on Radiological Protection and the National Council on Radiation Protection and Measurements have issued recommendations that would limit occupational exposure of individuals to doses lower than regulatory limits contained in the Nuclear Regulatory Commission`s 10 CFR Part 20, {open_quotes}Standards for Protection Against Radiation{close_quotes}. Because of this situation, there is interest in the potential benefits and impacts that would be associated with movement of the NRC regulatory limits toward the advisory bodies recommendations. The records of occupational worker doses in the U.S. commercial nuclear power industry show that the vast majority of these workers have doses that aremore » significantly below the regulatory limit of 50 mSv (5 rem) per year. Some workers doses do approach the limits, however. This is most common in the case of specially skilled workers, especially those with skills utilized in support of plant outage work. Any consideration of the potential benefits and impacts of hypothesized lower dose limits must address these workers as an important input to the overall assessment. There are also, of course, many other areas in which the benefits and impacts must be evaluated. To prepare to provide valid, constructive input on this matter, the U.S. nuclear power industry is undertaking an assessment, facilitated by the Nuclear Energy Institute (NEI), of the potential benefits and impacts at its facilities associated with hypothesized lower occupational dose limits. Some preliminary results available to date from this assessment are provided.« less

Limitations on work and attendance rates after employees with cancer returned to work at a single manufacturing company in Japan.

PubMed

Ohguri, Takayuki; Narai, Rie; Funahashi, Atsushi; Nishiura, Chihiro; Yamashita, Tsuyoshi; Yarita, Keiichiro; Korogi, Yukunori

2009-01-01

The purpose of this study was to evaluate the work limitations and attendance rates after employees diagnosed with cancer returned to work from sick leave, and to identify the related factors for the limitations and attendance rates at a single manufacturing company in Japan. This study retrospectively analyzed 129 men and 4 women, employed in a single manufacturing industry, who returned to work after sick leave due to newly diagnosis of cancer. Limitations on work after the return to work were enforced in the workplace based on an industrial physician's evaluation. All the employees who needed measures for work were examined by the industrial physicians every 1-6 months until the termination of such work limitations. Limitations on work after the return to work were enforced for 79 (59%) employees (36 employees with alteration of work, 31 with prohibition of shift work and 55 with prohibition of overtime work). A higher degree of work limitations was significantly correlated with work-related factors before sick leave (i.e. shift work, production line) as well as disease/treatment-related factors (i.e. chemotherapy, recurrence/metastasis), while the attendance rates after the return to work were not correlated with adverse work-related factors before sick leave. The enforcement of work limitations for employees with cancer was relatively common and was based on both disease/treatment- and work-related factors, and this phenomenon may play an important role in the return to work as well as the successful continuation of work after cancer survivors return to work.

Pb-Sr isotopic and geochemical constraints on sources and processes of lead contamination in well waters and soil from former fruit orchards, Pennsylvania, USA: A legacy of anthropogenic activities

USGS Publications Warehouse

Ayuso, Robert A.; Foley, Nora K.

2016-01-01

Isotopic discrimination can be an effective tool in establishing a direct link between sources of Pb contamination and the presence of anomalously high concentrations of Pb in waters, soils, and organisms. Residential wells supplying water containing up to 1600 ppb Pb to houses built on the former Mohr orchards commercial site, near Allentown, PA, were evaluated to discern anthropogenic from geogenic sources. Pb (n = 144) and Sr (n = 40) isotopic data and REE (n = 29) data were determined for waters from residential wells, test wells (drilled for this study), and surface waters from pond and creeks. Local soils, sediments, bedrock, Zn-Pb mineralization and coal were also analyzed (n = 94), together with locally used Pb-As pesticide (n = 5). Waters from residential and test wells show overlapping values of 206Pb/207Pb, 208Pb/207Pb and 87Sr/86Sr. Larger negative Ce anomalies (Ce/Ce*) distinguish residential wells from test wells. Results show that residential and test well waters, sediments from residential water filters in water tanks, and surface waters display broad linear trends in Pb isotope plots. Pb isotope data for soils, bedrock, and pesticides have contrasting ranges and overlapping trends. Contributions of Pb from soils to residential well waters are limited and implicated primarily in wells having shallow water-bearing zones and carrying high sediment contents. Pb isotope data for residential wells, test wells, and surface waters show substantial overlap with Pb data reflecting anthropogenic actions (e.g., burning fossil fuels, industrial and urban processing activities). Limited contributions of Pb from bedrock, soils, and pesticides are evident. High Pb concentrations in the residential waters are likely related to sediment build up in residential water tanks. Redox reactions, triggered by influx of groundwater via wells into the residential water systems and leading to subtle changes in pH, are implicated in precipitation of Fe oxyhydroxides, oxidative scavenging of Ce(IV), and desorption and release of Pb into the residential water systems. The Pb isotope features in the residences and the region are best interpreted as reflecting a legacy of industrial Pb present in underlying aquifers that currently supply the drinking water wells.

10 CFR 851.27 - Reference sources.

Code of Federal Regulations, 2011 CFR

2011-01-01

....nfpa.org. (v) American Conference of Governmental Industrial Hygienist (ACGIH), 1330 Kemper Meadow...) American Society of Mechanical Engineers (ASME), P.O. Box 2300 Fairfield, NJ 07007. Telephone: 800-843-2763...) American Conference of Governmental Industrial Hygienists, “Threshold Limit Values for Chemical Substances...

78 FR 72955 - Self-Regulatory Organizations; NYSE Arca, Inc.; Notice of Filing of Proposed Rule Change, as...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-04

... industry, as defined by the Standard Industrial Classification Codes utilized by the Division of Corporate Finance of the Commission.\\26\\ This limitation does not apply to investments in securities issued or...

Final Rule: NESHAP for the Portland Cement Manufacturing Industry: Alternative Monitoring Method

EPA Pesticide Factsheets

EPA is extending its approval for the use of an alternative method to show compliance with hydrogen chloride (HCl) emissions limits in the National Emission Standards for Hazardous Air Pollutants for the Portland Cement Manufacturing Industry

NESHAP for the Portland Cement Manufacturing Industry: Fact Sheets for Actions Since 2015

EPA Pesticide Factsheets

EPA is extending its approval for the use of an alternative method to show compliance with hydrogen chloride (HCl) emissions limits in the National Emission Standards for Hazardous Air Pollutants for the Portland Cement Manufacturing Industry

Genetic tools for advancement of Synechococcus sp. PCC 7002 as a cyanobacterial chassis

DOE PAGES

Ruffing, Anne M.; Jensen, Travis J.; Strickland, Lucas M.

2016-11-10

Successful implementation of modified cyanobacteria as hosts for industrial applications requires the development of a cyanobacterial chassis. The cyanobacterium Synechococcus sp. PCC 7002 embodies key attributes for an industrial host, including a fast growth rate and high salt, light, and temperature tolerances. Here, this study addresses key limitations in the advancement of Synechococcus sp. PCC 7002 as an industrial chassis.

Genetic tools for advancement of Synechococcus sp. PCC 7002 as a cyanobacterial chassis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ruffing, Anne M.; Jensen, Travis J.; Strickland, Lucas M.

Successful implementation of modified cyanobacteria as hosts for industrial applications requires the development of a cyanobacterial chassis. The cyanobacterium Synechococcus sp. PCC 7002 embodies key attributes for an industrial host, including a fast growth rate and high salt, light, and temperature tolerances. Here, this study addresses key limitations in the advancement of Synechococcus sp. PCC 7002 as an industrial chassis.

Stricter School Soda Limits Offered: Facing Lawsuit Threat, Beverage Industry Vows to Curb High-Calorie Drinks

ERIC Educational Resources Information Center

Samuels, Christina A.

2006-01-01

The soft-drink industry vowed to voluntarily curb selling sugary sodas and other high-calorie beverages in schools, a move that was taken under threat of litigation by critics who see the industry as a prime culprit in a national obesity crisis. The promise offered no guarantee that schools would go along with the restrictions, though many…

Clinical pulmonary function and industrial respirator wear

DOE Office of Scientific and Technical Information (OSTI.GOV)

Raven, P.B.; Moss, R.F.; Page, K.

1981-12-01

This investigation was the initial step in determining a clinical pulmonary test which could be used to evaluate workers as to their suitability to industrial respirator wear. Sixty subjects, 12 superior, 37 normal, and 11 moderately impaired with respect to lung function tests were evaluated with a battery of clinical pulmonary tests while wearing an industrial respirator. The respirator was a full-face mask (MSA-Ultravue) demand breathing type equipped with an inspiratory resistance of 85mm H/sub 2/O at 85 L/min air flow and an expiratory resistance of 25mm H/sub 2/O at 85 L/min air flow. Comparisons of these tests were mademore » between the three groups of subjects both with and without a respirator. It appears that those lung tests which measure the flow characteristics of the lung especially those that are effort dependant are more susceptible to change as a result of respirator wear. Hence, the respirator affects the person with superior lung function to a greater degree than the moderately impaired person. It was suggested that the clinical test of 15 second maximum voluntary ventilations (MVV./sub 25/) may be the test of choice for determining worker capability in wearing an industrial respirator.« less

Carbon-Carbon Nozzle Extension Development in Support of In-Space and Upper-Stage Liquid Rocket Engines

NASA Technical Reports Server (NTRS)

Gradl, Paul R.; Valentine, Peter G.

2017-01-01

Upper stage and in-space liquid rocket engines are optimized for performance through the use of high area ratio nozzles to fully expand combustion gases to low exit pressures, increasing exhaust velocities. Due to the large size of such nozzles, and the related engine performance requirements, carbon-carbon (C-C) composite nozzle extensions are being considered to reduce weight impacts. Currently, the state-of-the-art is represented by the metallic and foreign composite nozzle extensions limited to approximately 2000 degrees F. used on the Atlas V, Delta IV, Falcon 9, and Ariane 5 launch vehicles. NASA and industry partners are working towards advancing the domestic supply chain for C-C composite nozzle extensions. These development efforts are primarily being conducted through the NASA Small Business Innovation Research (SBIR) program in addition to other low level internal research efforts. This has allowed for the initial material development and characterization, subscale hardware fabrication, and completion of hot-fire testing in relevant environments. NASA and industry partners have designed, fabricated and hot-fire tested several subscale domestically produced C-C extensions to advance the material and coatings fabrication technology for use with a variety of liquid rocket and scramjet engines. Testing at NASA's Marshall Space Flight Center (MSFC) evaluated heritage and state-of-the-art C-C materials and coatings, demonstrating the initial capabilities of the high temperature materials and their fabrication methods. This paper discusses the initial material development, design and fabrication of the subscale carbon-carbon nozzle extensions, provides an overview of the test campaign, presents results of the hot fire testing, and discusses potential follow-on development work. The follow on work includes the fabrication of ultra-high temperature materials, larger C-C nozzle extensions, material characterization, sub-element testing and hot-fire testing at larger scale.

What residents don't know about physician-pharmaceutical industry interactions.

PubMed

Watkins, Raquel S; Kimberly, James

2004-05-01

Little is known about the knowledge and skills internal medicine residents need to interact appropriately with pharmaceutical industry representatives. The authors conducted a needs assessment of current knowledge and preferences for potential components of a new educational initiative among residents. In 2001, a two-page questionnaire using a five-point ordinal scale was mailed to all internal medicine residents and faculty at one institution. Analysis included use of Wilcoxon two-sample test. Response rates were 97% (85/88) for residents and 79% (86/109) for faculty. Residents and faculty's knowledge about formal position statements or literature on the impact of marketing strategies on prescribing patterns, drug marketing costs, or how pharmaceutical representatives are trained to interact with physicians was very limited. Most responders felt residents should learn to critically interpret promotional materials, recognize potential for conflict of interest, and consider how patients perceive the physician-pharmaceutical industry relationship. More faculty than residents valued including position statements (66% versus 39%, p <.001) and literature exploring the impact of marketing on prescribing patterns (70% versus 41%, p <.001) in education. Only one-half or fewer favored small-group discussions, lecture series, critical-reading skills seminars, or panel discussions. Internal medicine residents and faculty reported low levels of knowledge about physician-pharmaceutical industry relationships. Some consensus about educational components existed, but optimal educational formats remain uncertain. A six-hour curriculum to address this complex, emotionally charged topic was developed, implemented, and evaluated.

X-ray radiation detectors of ``scintillator-photoreceiving device type'' for industrial digital radiography with improved spatial resolution

NASA Astrophysics Data System (ADS)

Ryzhykov, V. D.; Lysetska, O. K.; Opolonin, O. D.; Kozin, D. N.

2003-06-01

Main types of photoreceivers used in X-ray digital radiography systems are luminescent screens that transfer the optical image onto charge collection instruments, which require cooling, and semiconductor silicon detectors, which limit the contrast sensitivity. We have developed and produced X-ray radiation detectors of "scintillator-photoreceiving device" (S-PRD) type, which are integrally located on the inverse side of the photodiode (PD). The receiving-converting circuit (RCC) is designed for data conversion into digital form and their input into PC. Software is provided for RCC control and image visualization. Main advantages of these detectors are high industrial resolution (3-5 line pairs per mm), detecting activity up to 20 μm, controlled sensitivity, low weight and small size, imaging low (0.1-0.3 mrad) object dose in real time. In this work, main characteristics of 32-, 64- and 1024-channel detectors of S-PRD type were studied and compared for X-ray sensitivity with S-PD detectors. Images of the tested objects have been obtained. Recommendations are given on the use of different scintillation materials, depending upon the purpose of a digital radiographic system. The detectors operate in a broad energy range of ionizing radiation, hence the size of the controlled object is not limited. The system is sufficiently powerful to ensure frontal (through two walls) observation of pipelines with wall thickness up to 10 cm.

Genome editing in livestock: Are we ready for a revolution in animal breeding industry?

PubMed

Ruan, Jinxue; Xu, Jie; Chen-Tsai, Ruby Yanru; Li, Kui

2017-12-01

Genome editing is a powerful technology that can efficiently alter the genome of organisms to achieve targeted modification of endogenous genes and targeted integration of exogenous genes. Current genome-editing tools mainly include ZFN, TALEN and CRISPR/Cas9, which have been successfully applied to all species tested including zebrafish, humans, mice, rats, monkeys, pigs, cattle, sheep, goats and others. The application of genome editing has quickly swept through the entire biomedical field, including livestock breeding. Traditional livestock breeding is associated with rate limiting issues such as long breeding cycle and limitations of genetic resources. Genome editing tools offer solutions to these problems at affordable costs. Generation of gene-edited livestock with improved traits has proven feasible and valuable. For example, the CD163 gene-edited pig is resistant to porcine reproductive and respiratory syndrome (PRRS, also referred to as "blue ear disease"), and a SP110 gene knock-in cow less susceptible to tuberculosis. Given the high efficiency and low cost of genome editing tools, particularly CRISPR/Cas9, it is foreseeable that a significant number of genome edited livestock animals will be produced in the near future; hence it is imperative to comprehensively evaluate the pros and cons they will bring to the livestock breeding industry. Only with these considerations in mind, we will be able to fully take the advantage of the genome editing era in livestock breeding.

Residential tap water contamination following the Freedom Industries chemical spill: perceptions, water quality, and health impacts.

PubMed

Whelton, Andrew J; McMillan, LaKia; Connell, Matt; Kelley, Keven M; Gill, Jeff P; White, Kevin D; Gupta, Rahul; Dey, Rajarshi; Novy, Caroline

2015-01-20

During January 2014, an industrial solvent contaminated West Virginia’s Elk River and 15% of the state population’s tap water. A rapid in-home survey and water testing was conducted 2 weeks following the spill to understand resident perceptions, tap water chemical levels, and premise plumbing flushing effectiveness. Water odors were detected in all 10 homes sampled before and after premise plumbing flushing. Survey and medical data indicated flushing caused adverse health impacts. Bench-scale experiments and physiochemical property predictions showed flushing promoted chemical volatilization, and contaminants did not appreciably sorb into cross-linked polyethylene (PEX) pipe. Flushing reduced tap water 4-methylcyclohexanemethanol (4-MCHM) concentrations within some but not all homes. 4-MCHM was detected at unflushed (<10 to 420 μg/L) and flushed plumbing systems (<10 to 96 μg/L) and sometimes concentrations differed among faucets within each home. All waters contained less 4-MCHM than the 1000 μg/L Centers for Disease Control drinking water limit, but one home exceeded the 120 μg/L drinking water limit established by independent toxicologists. Nearly all households refused to resume water use activities after flushing because of water safety concerns. Science based flushing protocols should be developed to expedite recovery, minimize health impacts, and reduce concentrations in homes when future events occur.

Impact of climate change and anthropogenic pressure on the water resources of India: challenges in management

NASA Astrophysics Data System (ADS)

Shadananan Nair, K.

2016-10-01

Freshwater resources of India are getting fast degraded and depleted from the changing climate and pressure of fast rising population. Changing intensity and seasonality of rainfall affect quantity and quality of water. Most of the rivers are polluted far above safety limits from the untreated domestic, industrial and agricultural effluents. Changes in the intensity, frequency and tracks of storms salinate coastal aquifers. Aquifers are also under the threat from rising sea level. Groundwater in urban limits and industrial zones are far beyond safety limits. Large-scale destruction of wetlands for industries and residential complexes has affected the quality of surface and groundwater resources in most parts of India. Measures to maintain food security and the new developments schemes such as river linking will further deteriorate the water resources. Falling water availability leads to serious health issues and various socio-economic issues. India needs urgent and appropriate adaptation strategies in the water sector.

40 CFR 60.2110 - What operating limits must I meet and by when?

Code of Federal Regulations, 2014 CFR

2014-07-01

... for Commercial and Industrial Solid Waste Incineration Units Emission Limitations and Operating Limits... zero to a level equivalent to at least two times your allowable emission limit. If your PM CPMS is an... of reading PM concentration from zero to a level equivalent to two times your allowable emission...

Ag-Modified In2O3/ZnO Nanobundles with High Formaldehyde Gas-Sensing Performance

PubMed Central

Fang, Fang; Bai, Lu; Song, Dongsheng; Yang, Hongping; Sun, Xiaoming; Sun, Hongyu; Zhu, Jing

2015-01-01

Ag-modified In2O3/ZnO bundles with micro/nano porous structures have been designed and synthesized with by hydrothermal method continuing with dehydration process. Each bundle consists of nanoparticles, where nanogaps of 10–30 nm are present between the nanoparticles, leading to a porous structure. This porous structure brings high surface area and fast gas diffusion, enhancing the gas sensitivity. Consequently, the HCHO gas-sensing performance of the Ag-modified In2O3/ZnO bundles have been tested, with the formaldehyde-detection limit of 100 ppb (parts per billion) and the response and recover times as short as 6 s and 3 s, respectively, at 300 °C and the detection limit of 100 ppb, response time of 12 s and recover times of 6 s at 100 °C. The HCHO sensing detect limitation matches the health standard limitation on the concentration of formaldehyde for indoor air. Moreover, the strategy to synthesize the nanobundles is just two-step heating and easy to scale up. Therefore, the Ag-modified In2O3/ZnO bundles are ready for industrialization and practical applications. PMID:26287205

Applying the three R's: Reduce, reuse, and recycle in the chemical industry.

PubMed

Mostafa, Mohamed K; Peters, Robert W

2017-03-01

Pollution prevention (P2) assessment was conducted by applying the three R's, reduce, reuse, and recycle, in a chemical industry for the purpose of reducing the amount of wastewater generated, reusing paint wastewater in the manufacture of cement bricks, recycling cooling water, and improving water usage efficiency. The results of this study showed that the annual wastewater flow generated from the paint manufacturing can be reduced from 1,100 m 3 to 488.4 m 3 (44.4% reduction) when a high-pressure hose is used. Two mixtures were prepared. The first mixture (A) contains cement, coarse aggregate, fine aggregate, Addicrete BVF, and clean water. The second mixture (B) contains the same components used in the first mixture, except that paint wastewater was used instead of the clean water. The prepared samples were tested for water absorption, toxicity, reactivity, compressive strength, ignitability, and corrosion. The tests results indicated that using paint wastewater in the manufacture of the cement bricks improved the mechanical properties of the bricks. The toxicity test results showed that the metals concentration in the bricks did not exceed the U.S. EPA limits. This company achieved the goal of zero liquid discharge (ZLD), especially after recycling 2,800 m 3 of cooling water. The total annual saving could reach $42,570 with a payback period of 41 days. This research focused on improving the water usage efficiency, reducing the quantity of wastewater generated, and potentially reusing wastewater in the manufacture of cement bricks. Reusing paint wastewater in the manufacture of the bricks prevents the hazardous pollutants in the wastewater (calcium carbonate, styrene acrylic resins, colored pigments, and titanium dioxide) from entering and polluting the surface water and the environment. We think that this paper will help to find the most efficient and cost-effective way to manage paint wastewater and conserve fresh water resources. We also believe that this paper provides a rich agenda for future research in water conservation and industrial wastewater reuse subjects.

Advantages and limitations of potential methods for the analysis of bacteria in milk: a review.

PubMed

Tabit, Frederick Tawi

2016-01-01

Contamination concerns in the dairy industry are motivated by outbreaks of disease in humans and the inability of thermal processes to eliminate bacteria completely in processed products. HACCP principles are an important tool used in the food industry to identify and control potential food safety hazards in order to meet customer demands and regulatory requirements. Milk testing is of importance to the milk industry regarding quality assurance and monitoring of processed products by researchers, manufacturers and regulatory agencies. Due to the availability of numerous methods used for analysing the microbial quality of milk in literature and differences in priorities of stakeholders, it is sometimes confusing to choose an appropriate method for a particular analysis. The objective of this paper is to review the advantages and disadvantages of selected techniques that can be used in the analysis of bacteria in milk. SSC, HRMA, REP, and RAPD are the top four techniques which are quick and cost-effective and possess adequate discriminatory power for the detection and profiling of bacteria. The following conclusions were arrived at during this review: HRMA, REP and RFLP are the techniques with the most reproducible results, and the techniques with the most discriminatory power are AFLP, PFGE and Raman Spectroscopy.

INSCAN PRO: a fast ultraviolet spectrometer design approach

NASA Astrophysics Data System (ADS)

Myer, Brian Walker; Dias, João. Mendanha

2013-11-01

Spectroscopy diagnostic techniques have applications in such diverse areas as mechanical and aerospace engineering, physical chemistry, optics, food and pharmaceutical industries. However, the technological state-of-the-art spectrometers do not allow very fast processes to be evaluated or controlled. This ability is crucial in the optimization of industrial processes (welding, burning flames, spark ignition, pulsed radiolysis…) where more theoretical-experimental analysis should be performed. The INSCAN project aims to overcome this technological limitation, to satisfy needs in academia and industrial markets, by developing a compact spectrometer with focal lengths less than 200 mm, taking into account three important aspects: acquisition rate of approximately 10 kHz spectra, spectral resolution on the order of 0.1 nm and operating in the spectral range 200 nm to 700 nm. Initial work is described on the optical design of the device and several possible approaches to achieve the specifications are considered. To guide the first order design, we relate the optical linewidth, spectral bandwidth and imaging properties to component characteristics. The symmetrical Czerny-Turner optical mount was chosen for its flexibility and elaborated using ZEMAX. Predictions made based on the simulated system are compared with calibration and characterization measurements on an experimental test bench used to refine the model assumptions.

Study sponsorship and the nutrition research agenda: analysis of randomized controlled trials included in systematic reviews of nutrition interventions to address obesity.

PubMed

Fabbri, Alice; Chartres, Nicholas; Scrinis, Gyorgy; Bero, Lisa A

2017-05-01

To categorize the research topics covered by a sample of randomized controlled trials (RCT) included in systematic reviews of nutrition interventions to address obesity; to describe their funding sources; and to explore the association between funding sources and nutrition research topics. Cross-sectional study. RCT included in Cochrane Reviews of nutrition interventions to address obesity and/or overweight. Two hundred and thirteen RCT from seventeen Cochrane Reviews were included. Funding source and authors' conflicts of interest were disclosed in 82·6 and 29·6 % of the studies, respectively. RCT were more likely to test an intervention to manipulate nutrients in the context of reduced energy intake (44·2 % of studies) than food-level (11·3 %) and dietary pattern-level (0·9 %) interventions. Most of the food industry-sponsored studies focused on interventions involving manipulations of specific nutrients (66·7 %). Only 33·1 % of the industry-funded studies addressed dietary behaviours compared with 66·9 % of the non-industry-funded ones (P=0·002). The level of food processing was poorly considered across all funding sources. The predominance of RCT examining nutrient-specific questions could limit the public health relevance of rigorous evidence available for systematic reviews and dietary guidelines.

A history of the early days of personality testing in American industry: an obsession with adjustment.

PubMed

Gibby, Robert E; Zickar, Michael J

2008-08-01

Objective personality testing began with Woodworth's Personal Data Sheet in 1917. That test was developed to identify soldiers prone to nervous breakdowns during enemy bombardment in World War I (WWI). Soon after, many competing personality tests were developed for use in industry. Many of these tests, like Woodworth's, focused on the construct of employee maladjustment and were deemed important in screening out applicants who would create workplace disturbances. In this article, the authors review the history of these early personality tests, especially the Bernreuter Personality Inventory and the Humm-Wadsworth Temperament Scale, and discuss the implications of personality testers' obsession with the construct of employee maladjustment. In addition, the authors discuss the industry's obsession with emotional maladjustment and how this obsession coincided with a cultural shift in norms relating to cultural expression.

Annual Industrial Capabilities Report to Congress

DTIC Science & Technology

2007-02-01

65 5.1 Aircraft Sector Industrial Summary ................................................................. 65 5.2 Command...industry partners to encourage long-term contractor workforce improvements. Industry segment-level baseline assessments ( aircraft ; command, control...For instance, within aircraft major defense acquisition programs (MDAPs), research, development, test, and evaluation (RDT&E) funding is steadily

Emergy analysis of an industrial park: the case of Dalian, China.

PubMed

Geng, Yong; Zhang, Pan; Ulgiati, Sergio; Sarkis, Joseph

2010-10-15

With the rapid development of eco-industrial park projects in China, evaluating their overall eco-efficiency is becoming an important need and a big challenge academically. Developing ecologically conscious industrial park management requires analysis of both industrial and ecological systems. Traditional evaluation methods based on neoclassical economics and embodied energy and exergy analyses have certain limitations due to their focus with environmental issues considered secondary to the maximization of economic and technical objectives. Such methods focus primarily on the environmental impact of emissions and their economic consequences. These approaches ignore the contribution of ecological products and services as well as the load placed on environmental systems and related problems of carrying capacity of economic and industrial development. This paper presents a new method, based upon emergy analysis and synthesis. Such a method links economic and ecological systems together, highlighting the internal relations among the different subsystems and components. The emergy-based method provides insight into the environmental performance and sustainability of an industrial park. This paper depicts the methodology of emergy analysis at the industrial park level and provides a series of emergy-based indices. A case study is investigated and discussed in order to show the emergy method's practical potential. Results from DEDZ (Dalian Economic Development Zone) case show us the potential of emergy synthesis method at the industrial park level for environmental policy making. Its advantages and limitations are also discussed with avenues for future research identified. Copyright © 2010 Elsevier B.V. All rights reserved.

Medical Schools' Industry Interaction Policies Not Associated With Trainees' Self-Reported Behavior as Residents: Results of a National Survey.

PubMed

Yeh, James S; Austad, Kirsten E; Franklin, Jessica M; Chimonas, Susan; Campbell, Eric G; Avorn, Jerry; Kesselheim, Aaron S

2015-12-01

Medical students attending schools with policies limiting industry/student interactions report fewer relationships with pharmaceutical representatives. To investigate whether associations between students' medical school policies and their more limited industry interaction behaviors persist into residency. We randomly sampled 1800 third-year residents who graduated from 120 allopathic US-based medical schools, using the American Medical Association Physician Masterfile. We surveyed them in 2011 to determine self-reported behavior and preferences for brand-name prescriptions, and we calculated the strength of their medical schools' industry interaction policies using the 2008 American Medical Student Association and Institute on Medicine as a Profession databases. We used logistic regression to estimate the association between strength of school policies and residents' behaviors with adjustments for class size, postresidency career plan, and concern about medical school debt. We achieved a 44% survey response rate (n = 739). Residents who graduated from schools with restrictive policies were no more or less likely to accept industry gifts or industry-sponsored meals, speak with marketing representative about drug products, attend industry-sponsored lectures, or prefer brand-name medications than residents who graduated from schools with less restrictive policies. Residents who correctly answered evidence-based prescription questions were about 30% less likely to have attended industry-sponsored lectures (OR = 0.72, 95% CI 0.56-0.98). Any effect that medical school industry interaction policies had on insulating students from pharmaceutical marketing did not persist in the behavior of residents in our sample. This suggests that residency training environments are important in influencing behavior.

A photovoltaic industry overview - The results of a survey on photovoltaic technology industrialization

NASA Technical Reports Server (NTRS)

Ferber, R. R.; Costogue, E. N.; Thornhill, J. W.; Shimada, K.

1981-01-01

The National Photovoltaics Program of the United States Department of Energy has the objective of bringing photovoltaic power systems to a point where they can supply a significant portion of the United States energy requirements by the year 2000. This is planned to be accomplished through substantial research and technology development activities aimed at achieving major cost reductions and market penetration. This paper presents information derived from a limited survey performed to obtain photovoltaic industry attitudes concerning industrialization, and to determine current industry plans to meet the DOE program goals. Silicon material production, a key photovoltaic manufacturing industry, is highlighted with regards to implementation of technology improvement and silicon material supply outlook.

Industry-Oriented Laboratory Development for Mixed-Signal IC Test Education

ERIC Educational Resources Information Center

Hu, J.; Haffner, M.; Yoder, S.; Scott, M.; Reehal, G.; Ismail, M.

2010-01-01

The semiconductor industry is lacking qualified integrated circuit (IC) test engineers to serve in the field of mixed-signal electronics. The absence of mixed-signal IC test education at the collegiate level is cited as one of the main sources for this problem. In response to this situation, the Department of Electrical and Computer Engineering at…

Performance-Based Assessment: Meeting the Needs of Diverse Learners

ERIC Educational Resources Information Center

Tung, Rosann

2017-01-01

Fueled by the No Child Left Behind Act (NCLB) and its focus on standardized testing, the U.S. assessment system has been driven by capitalism rather than educational benefit. Annually, the testing industry, which four companies monopolize, is valued at between $400 and $700 million. The testing industry drives Americans to spend $13.1 billion each…

Giant Magnetoresistance Sensors: A Review on Structures and Non-Destructive Eddy Current Testing Applications

PubMed Central

Rifai, Damhuji; Abdalla, Ahmed N.; Ali, Kharudin; Razali, Ramdan

2016-01-01

Non-destructive eddy current testing (ECT) is widely used to examine structural defects in ferromagnetic pipe in the oil and gas industry. Implementation of giant magnetoresistance (GMR) sensors as magnetic field sensors to detect the changes of magnetic field continuity have increased the sensitivity of eddy current techniques in detecting the material defect profile. However, not many researchers have described in detail the structure and issues of GMR sensors and their application in eddy current techniques for nondestructive testing. This paper will describe the implementation of GMR sensors in non-destructive testing eddy current testing. The first part of this paper will describe the structure and principles of GMR sensors. The second part outlines the principles and types of eddy current testing probe that have been studied and developed by previous researchers. The influence of various parameters on the GMR measurement and a factor affecting in eddy current testing will be described in detail in the third part of this paper. Finally, this paper will discuss the limitations of coil probe and compensation techniques that researchers have applied in eddy current testing probes. A comprehensive review of previous studies on the application of GMR sensors in non-destructive eddy current testing also be given at the end of this paper. PMID:26927123

Giant Magnetoresistance Sensors: A Review on Structures and Non-Destructive Eddy Current Testing Applications.

PubMed

Rifai, Damhuji; Abdalla, Ahmed N; Ali, Kharudin; Razali, Ramdan

2016-02-26

Non-destructive eddy current testing (ECT) is widely used to examine structural defects in ferromagnetic pipe in the oil and gas industry. Implementation of giant magnetoresistance (GMR) sensors as magnetic field sensors to detect the changes of magnetic field continuity have increased the sensitivity of eddy current techniques in detecting the material defect profile. However, not many researchers have described in detail the structure and issues of GMR sensors and their application in eddy current techniques for nondestructive testing. This paper will describe the implementation of GMR sensors in non-destructive testing eddy current testing. The first part of this paper will describe the structure and principles of GMR sensors. The second part outlines the principles and types of eddy current testing probe that have been studied and developed by previous researchers. The influence of various parameters on the GMR measurement and a factor affecting in eddy current testing will be described in detail in the third part of this paper. Finally, this paper will discuss the limitations of coil probe and compensation techniques that researchers have applied in eddy current testing probes. A comprehensive review of previous studies on the application of GMR sensors in non-destructive eddy current testing also be given at the end of this paper.

20 CFR 422.607 - Limited reopening of assignments.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 20 Employees' Benefits 2 2011-04-01 2011-04-01 false Limited reopening of assignments. 422.607 Section 422.607 Employees' Benefits SOCIAL SECURITY ADMINISTRATION ORGANIZATION AND PROCEDURES Administrative Review Process Under the Coal Industry Retiree Health Benefit Act of 1992 § 422.607 Limited...