Developing Essay Writing Skills: An Evaluation of the Modelling Behaviour Method and the Influence of Student Self-Efficacy

ERIC Educational Resources Information Center

Callinan, Carol J.; van der Zee, Emile; Wilson, Garry

2018-01-01

Social cognitive learning theory has shown that observational learning positively influences essay writing development in high-school students, and that self-efficacy impacts on motivation. This study investigated the relative contribution of model observation, model evaluation, post-submission feedback, and factors relating to self-efficacy, as…

Research on assessment and improvement method of remote sensing image reconstruction

NASA Astrophysics Data System (ADS)

Sun, Li; Hua, Nian; Yu, Yanbo; Zhao, Zhanping

2018-01-01

Remote sensing image quality assessment and improvement is an important part of image processing. Generally, the use of compressive sampling theory in remote sensing imaging system can compress images while sampling which can improve efficiency. A method of two-dimensional principal component analysis (2DPCA) is proposed to reconstruct the remote sensing image to improve the quality of the compressed image in this paper, which contain the useful information of image and can restrain the noise. Then, remote sensing image quality influence factors are analyzed, and the evaluation parameters for quantitative evaluation are introduced. On this basis, the quality of the reconstructed images is evaluated and the different factors influence on the reconstruction is analyzed, providing meaningful referential data for enhancing the quality of remote sensing images. The experiment results show that evaluation results fit human visual feature, and the method proposed have good application value in the field of remote sensing image processing.

What influences the choice of assessment methods in health technology assessments? Statistical analysis of international health technology assessments from 1989 to 2002.

PubMed

Draborg, Eva; Andersen, Christian Kronborg

2006-01-01

Health technology assessment (HTA) has been used as input in decision making worldwide for more than 25 years. However, no uniform definition of HTA or agreement on assessment methods exists, leaving open the question of what influences the choice of assessment methods in HTAs. The objective of this study is to analyze statistically a possible relationship between methods of assessment used in practical HTAs, type of assessed technology, type of assessors, and year of publication. A sample of 433 HTAs published by eleven leading institutions or agencies in nine countries was reviewed and analyzed by multiple logistic regression. The study shows that outsourcing of HTA reports to external partners is associated with a higher likelihood of using assessment methods, such as meta-analysis, surveys, economic evaluations, and randomized controlled trials; and with a lower likelihood of using assessment methods, such as literature reviews and "other methods". The year of publication was statistically related to the inclusion of economic evaluations and shows a decreasing likelihood during the year span. The type of assessed technology was related to economic evaluations with a decreasing likelihood, to surveys, and to "other methods" with a decreasing likelihood when pharmaceuticals were the assessed type of technology. During the period from 1989 to 2002, no major developments in assessment methods used in practical HTAs were shown statistically in a sample of 433 HTAs worldwide. Outsourcing to external assessors has a statistically significant influence on choice of assessment methods.

The Role of Protected Areas in the Avoidance of Anthropogenic Conversion in a High Pressure Region: A Matching Method Analysis in the Core Region of the Brazilian Cerrado

PubMed Central

Paiva, Rodrigo José Oliveira; Brites, Ricardo Seixas; Machado, Ricardo Bomfim

2015-01-01

Global efforts to avoid anthropogenic conversion of natural habitat rely heavily on the establishment of protected areas. Studies that evaluate the effectiveness of these areas with a focus on preserving the natural habitat define effectiveness as a measure of the influence of protected areas on total avoided conversion. Changes in the estimated effectiveness are related to local and regional differences, evaluation methods, restriction categories that include the protected areas, and other characteristics. The overall objective of this study was to evaluate the effectiveness of protected areas to prevent the advance of the conversion of natural areas in the core region of the Brazil’s Cerrado Biome, taking into account the influence of the restriction degree, governmental sphere, time since the establishment of the protected area units, and the size of the area on the performance of protected areas. The evaluation was conducted using matching methods and took into account the following two fundamental issues: control of statistical biases caused by the influence of covariates on the likelihood of anthropogenic conversion and the non-randomness of the allocation of protected areas throughout the territory (spatial correlation effect) and the control of statistical bias caused by the influence of auto-correlation and leakage effect. Using a sample design that is not based on ways to control these biases may result in outcomes that underestimate or overestimate the effectiveness of those units. The matching method accounted for a bias reduction in 94–99% of the estimation of the average effect of protected areas on anthropogenic conversion and allowed us to obtain results with a reduced influence of the auto-correlation and leakage effects. Most protected areas had a positive influence on the maintenance of natural habitats, although wide variation in this effectiveness was dependent on the type, restriction, governmental sphere, size and age group of the unit. PMID:26222140

Study on the influence of X-ray tube spectral distribution on the analysis of bulk samples and thin films: Fundamental parameters method and theoretical coefficient algorithms

NASA Astrophysics Data System (ADS)

Sitko, Rafał

2008-11-01

Knowledge of X-ray tube spectral distribution is necessary in theoretical methods of matrix correction, i.e. in both fundamental parameter (FP) methods and theoretical influence coefficient algorithms. Thus, the influence of X-ray tube distribution on the accuracy of the analysis of thin films and bulk samples is presented. The calculations are performed using experimental X-ray tube spectra taken from the literature and theoretical X-ray tube spectra evaluated by three different algorithms proposed by Pella et al. (X-Ray Spectrom. 14 (1985) 125-135), Ebel (X-Ray Spectrom. 28 (1999) 255-266), and Finkelshtein and Pavlova (X-Ray Spectrom. 28 (1999) 27-32). In this study, Fe-Cr-Ni system is selected as an example and the calculations are performed for X-ray tubes commonly applied in X-ray fluorescence analysis (XRF), i.e., Cr, Mo, Rh and W. The influence of X-ray tube spectra on FP analysis is evaluated when quantification is performed using various types of calibration samples. FP analysis of bulk samples is performed using pure-element bulk standards and multielement bulk standards similar to the analyzed material, whereas for FP analysis of thin films, the bulk and thin pure-element standards are used. For the evaluation of the influence of X-ray tube spectra on XRF analysis performed by theoretical influence coefficient methods, two algorithms for bulk samples are selected, i.e. Claisse-Quintin (Can. Spectrosc. 12 (1967) 129-134) and COLA algorithms (G.R. Lachance, Paper Presented at the International Conference on Industrial Inorganic Elemental Analysis, Metz, France, June 3, 1981) and two algorithms (constant and linear coefficients) for thin films recently proposed by Sitko (X-Ray Spectrom. 37 (2008) 265-272).

Digital image color analysis compared to direct dental CIE colorimeter assessment under different ambient conditions.

PubMed

Knösel, Michael; Attin, Rengin; Jung, Klaus; Brunner, Edgar; Kubein-Meesenburg, Dietmar; Attin, Thomas

2009-04-01

To evaluate the concordance and repeatability of two in vivo methods for dental color assessment and to clarify the influence of different ambient light conditions and subject's head position on the assessed color variables. Color assessments were performed by two examiners on 16 arbitrarily selected subjects under two different, standardized conditions of illumination and at two different standardized head angulations. CIE (L*a*b*) data for upper and lower central incisors were recorded in two different ways: (1) by an intra-oral contact dental colorimeter and (2) by processing digital images for performing color calculation using Adobe Photoshop software. The influence of the different ambient conditions on both methods, as well as the concordance of measurements was analyzed statistically using several mixed linear models. Ambient light as a single factor had no significant influence on maxillary L*, a* and b* values, but it did have an effect on mandible assessments. Head angulation variation resulted in significant L* value differences using the photo method. The operator had a significant influence on values a* and b* for the photo method and on a* values for the colorimeter method. In fully lit ambient condition, the operator had a significant influence on the segregated L*, a*, and b* values. With dimmed lights, head angulation became significant, but not the operator. Evaluation of segregated L* values was error prone in both methods. Comparing both methods, deltaE values did not exceed 2.85 units, indicating that color differences between methods and recorded under varying ambient conditions were well below the sensitivity of the naked eye.

Do Different Training Conditions Facilitate Team Implementation? A Quasi-Experimental Mixed Methods Study

ERIC Educational Resources Information Center

Nielsen, Karina; Randall, Raymond; Christensen, Karl B.

2017-01-01

A mixed methods approach was applied to examine the effects of a naturally occurring teamwork intervention supported with training. The first objective was to integrate qualitative process evaluation and quantitative effect evaluation to examine "how" and "why" the training influence intervention outcomes. The intervention (N =…

Dosimetric evaluation of intrafractional tumor motion by means of a robot driven phantom

DOE Office of Scientific and Technical Information (OSTI.GOV)

Richter, Anne; Wilbert, Juergen; Flentje, Michael

2011-10-15

Purpose: The aim of the work was to investigate the influence of intrafractional tumor motion to the accumulated (absorbed) dose. The accumulated dose was determined by means of calculations and measurements with a robot driven motion phantom. Methods: Different motion scenarios and compensation techniques were realized in a phantom study to investigate the influence of motion on image acquisition, dose calculation, and dose measurement. The influence of motion on the accumulated dose was calculated by employing two methods (a model based and a voxel based method). Results: Tumor motion resulted in a blurring of steep dose gradients and a reductionmore » of dose at the periphery of the target. A systematic variation of motion parameters allowed the determination of the main influence parameters on the accumulated dose. The key parameters with the greatest influence on dose were the mean amplitude and the pattern of motion. Investigations on necessary safety margins to compensate for dose reduction have shown that smaller safety margins are sufficient, if the developed concept with optimized margins (OPT concept) was used instead of the standard internal target volume (ITV) concept. Both calculation methods were a reasonable approximation of the measured dose with the voxel based method being in better agreement with the measurements. Conclusions: Further evaluation of available systems and algorithms for dose accumulation are needed to create guidelines for the verification of the accumulated dose.« less

Using Self-Efficacy as a Construct for Evaluating Science and Mathematics Methods Courses

NASA Astrophysics Data System (ADS)

Brand, Brenda R.; Wilkins, Jesse L. M.

2007-04-01

The focus of this study was elementary preservice teachers’ development as effective teachers of science and mathematics as influenced by their participation in elementary science and mathematics methods courses. Preservice teachers’ reports of factors that influenced their perception of their teaching abilities were analyzed according to Bandura’s (1994) 4 sources of efficacy: mastery experiences, vicarious experiences, social persuasion, and stress reduction. This investigation allowed the researchers to evaluate the courses based on these sources. The analysis indicated all 4 sources influenced preservice teachers’ teaching self-efficacy beliefs, with mastery experiences considered the most influential. Embedded within discussions of mastery experiences were references to the other sources of efficacy, which suggest an interrelationship between mastery experiences and the other sources.

[Influence of human activities on groundwater environment based on coefficient variation method].

PubMed

Zhao, Wei; Lin, Jian; Wang, Shu-Fang; Liu, Ji-Lai; Chen, Zhong-Rong; Kou, Wen-Jie

2013-04-01

Groundwater system in the plain area of Beijing can be divided into six subsystems. Due to the different hydrogeological conditions of the subsystems, the degrees to which human activities affect the subsystems are also diverse. In order to evaluate the influence of human activities on each subsystem, the first and second aquifer with relatively poor water quality were chosen to be the evaluating positions, based on the data of groundwater sampled in September, 2011. With respect to human activities affect index such as total hardness, TDS, sulfate and ammonium, variation coefficient methods were used to calculate the weight of each index. Then scores were obtained for each index with national standard as reference, and superposition calculations were used to gain comprehensive scores, finally the groundwater quality conditions were evaluated. Contrast analyses were used to evaluate the incidence of human activities with groundwater subsystems as evaluation unit and water quality partitions as evaluation factors. The results indicate that the influence of human activities on the first aquifer is greater than that of the second aquifer, the Yongding river groundwater subsystems and the Chaobai river groundwater subsystems are affected more than other groundwater subsystems.

Evaluating core technology capacity based on an improved catastrophe progression method: the case of automotive industry

NASA Astrophysics Data System (ADS)

Zhao, Shijia; Liu, Zongwei; Wang, Yue; Zhao, Fuquan

2017-01-01

Subjectivity usually causes large fluctuations in evaluation results. Many scholars attempt to establish new mathematical methods to make evaluation results consistent with actual objective situations. An improved catastrophe progression method (ICPM) is constructed to overcome the defects of the original method. The improved method combines the merits of the principal component analysis' information coherence and the catastrophe progression method's none index weight and has the advantage of highly objective comprehensive evaluation. Through the systematic analysis of the influencing factors of the automotive industry's core technology capacity, the comprehensive evaluation model is established according to the different roles that different indices play in evaluating the overall goal with a hierarchical structure. Moreover, ICPM is developed for evaluating the automotive industry's core technology capacity for the typical seven countries in the world, which demonstrates the effectiveness of the method.

Northwest Manufacturing Initiative

DTIC Science & Technology

2013-03-26

Testing of Metallic Materials] specifications. For high temperature tests, a heated water bath was use while for low temperature testing down to...Weld metal and heat affected zones were evaluated using Charpy and E399 fracture toughness methods. The influence of temperature , loading rate, CVN...determine the influence of fracture test methods and welding procedures on toughness. Room temperature E399 tests, (CTS) were carried out under

Collective Influence of Multiple Spreaders Evaluated by Tracing Real Information Flow in Large-Scale Social Networks

NASA Astrophysics Data System (ADS)

Teng, Xian; Pei, Sen; Morone, Flaviano; Makse, Hernán A.

2016-10-01

Identifying the most influential spreaders that maximize information flow is a central question in network theory. Recently, a scalable method called “Collective Influence (CI)” has been put forward through collective influence maximization. In contrast to heuristic methods evaluating nodes’ significance separately, CI method inspects the collective influence of multiple spreaders. Despite that CI applies to the influence maximization problem in percolation model, it is still important to examine its efficacy in realistic information spreading. Here, we examine real-world information flow in various social and scientific platforms including American Physical Society, Facebook, Twitter and LiveJournal. Since empirical data cannot be directly mapped to ideal multi-source spreading, we leverage the behavioral patterns of users extracted from data to construct “virtual” information spreading processes. Our results demonstrate that the set of spreaders selected by CI can induce larger scale of information propagation. Moreover, local measures as the number of connections or citations are not necessarily the deterministic factors of nodes’ importance in realistic information spreading. This result has significance for rankings scientists in scientific networks like the APS, where the commonly used number of citations can be a poor indicator of the collective influence of authors in the community.

Collective Influence of Multiple Spreaders Evaluated by Tracing Real Information Flow in Large-Scale Social Networks

PubMed Central

Teng, Xian; Pei, Sen; Morone, Flaviano; Makse, Hernán A.

2016-01-01

Identifying the most influential spreaders that maximize information flow is a central question in network theory. Recently, a scalable method called “Collective Influence (CI)” has been put forward through collective influence maximization. In contrast to heuristic methods evaluating nodes’ significance separately, CI method inspects the collective influence of multiple spreaders. Despite that CI applies to the influence maximization problem in percolation model, it is still important to examine its efficacy in realistic information spreading. Here, we examine real-world information flow in various social and scientific platforms including American Physical Society, Facebook, Twitter and LiveJournal. Since empirical data cannot be directly mapped to ideal multi-source spreading, we leverage the behavioral patterns of users extracted from data to construct “virtual” information spreading processes. Our results demonstrate that the set of spreaders selected by CI can induce larger scale of information propagation. Moreover, local measures as the number of connections or citations are not necessarily the deterministic factors of nodes’ importance in realistic information spreading. This result has significance for rankings scientists in scientific networks like the APS, where the commonly used number of citations can be a poor indicator of the collective influence of authors in the community. PMID:27782207

Evaluation Influence: The Evaluation Event and Capital Flow in International Development.

PubMed

Bell, David A

2017-12-01

Assessing program effectiveness in human development is central to informing foreign aid policy-making and organizational learning. Foreign aid effectiveness discussions have increasingly given attention to the devaluing effects of aid flow volatility. This study reveals that the external evaluation event influences actor behavior, serving as a volatility-constraining tool. A case study of a multidonor aid development mechanism served examining the influence of an evaluation event when considering anticipatory effects. The qualitative component used text and focus group data combined with individual interview data (organizations n = 10, including 26 individuals). Quantitative data included financial information on all 75 capital investments. The integrated theory of influence and model of alternative mechanisms used these components to identify the linkage between the evaluation event and capital flow volatility. Aid approved in the year of the midterm evaluation was disbursed by the mechanism with low capital volatility. Anticipating the evaluation event influenced behavior resulting in an empirical record that program outcomes were enhanced and the mechanism was an improved organization. Formative evaluations in a development program can trigger activity as an interim process. That activity provides for a more robust assessment of ultimate consequence of interest. Anticipating an evaluation can stimulate donor reality testing. The findings inform and strengthen future research on the influence of anticipating an evaluation. Closely examining activities before, during, and shortly after the evaluation event can aid development of other systematic methods to improve understanding this phenomenon, as well as improve donor effectiveness strategies.

Does Research on Evaluation Matter? Findings from a Survey of American Evaluation Association Members and Prominent Evaluation Theorists and Scholars

ERIC Educational Resources Information Center

Coryn, Chris L. S.; Ozeki, Satoshi; Wilson, Lyssa N.; Greenman, Gregory D., II; Schröter, Daniela C.; Hobson, Kristin A.; Azzam, Tarek; Vo, Anne T.

2016-01-01

Research on evaluation theories, methods, and practices has increased considerably in the past decade. Even so, little is known about whether published findings from research on evaluation are read by evaluators and whether such findings influence evaluators' thinking about evaluation or their evaluation practice. To address these questions, and…

Methods for evaluating information in managing the enterprise on the basis of a hybrid three-tier system

NASA Astrophysics Data System (ADS)

Vasil'ev, V. A.; Dobrynina, N. V.

2017-01-01

The article presents data on the influence of information upon the functioning of complex systems in the process of ensuring their effective management. Ways and methods for evaluating multidimensional information that reduce time and resources, improve the validity of the studied system management decisions, were proposed.

Personality and Student Performance on Evaluation Methods Used in Business Administration Courses

ERIC Educational Resources Information Center

Lakhal, Sawsen; Sévigny, Serge; Frenette, Éric

2015-01-01

The objective of this study was to verify whether personality (Big Five model) influences performance on the evaluation methods used in business administration courses. A sample of 169 students enrolled in two compulsory undergraduate business courses responded to an online questionnaire. As it is difficult within the same course to assess…

Cambered Jet-Flapped Airfoil Theory with Tables and Computer Programs for Application.

DTIC Science & Technology

1977-09-01

influence function which is a parametric function of the jet-momentum coefficient. In general, the integrals involved must be evaluated by numerical methods. Tables of the necessary influence functions are given in the report.

Evaluative Indices Assigned to Contraceptive Methods by University Undergraduates

ERIC Educational Resources Information Center

McDermott, Robert J.; Malo, Teri L.; Dodd, Virginia J.; Daley, Ellen M.; Mayer, Alyssa B.

2011-01-01

Background: Preordinate attitudes and beliefs about contraception may influence acceptance or rejection of a particular method. Purpose: We examined the attitudes about contraception methods held by undergraduate students (N=792) at two large southeastern universities in the United States. Methods: Twelve methods were rated on 40 semantic…

Evaluation of methods of determining humic acids in nucleic acid samples for molecular biological analysis.

PubMed

Wang, Yong; Fujii, Takeshi

2011-01-01

It is important in molecular biological analyses to evaluate contamination of co-extracted humic acids in DNA/RNA extracted from soil. We compared the sensitivity of various methods for measurement of humic acids, and influences of DNA/RNA and proteins on the measurement. Considering the results, we give suggestions as to choice of methods for measurement of humic acids in molecular biological analyses.

A Methodology for Anatomic Ultrasound Image Diagnostic Quality Assessment.

PubMed

Hemmsen, Martin Christian; Lange, Theis; Brandt, Andreas Hjelm; Nielsen, Michael Bachmann; Jensen, Jorgen Arendt

2017-01-01

This paper discusses the methods for the assessment of ultrasound image quality based on our experiences with evaluating new methods for anatomic imaging. It presents a methodology to ensure a fair assessment between competing imaging methods using clinically relevant evaluations. The methodology is valuable in the continuing process of method optimization and guided development of new imaging methods. It includes a three phased study plan covering from initial prototype development to clinical assessment. Recommendations to the clinical assessment protocol, software, and statistical analysis are presented. Earlier uses of the methodology has shown that it ensures validity of the assessment, as it separates the influences between developer, investigator, and assessor once a research protocol has been established. This separation reduces confounding influences on the result from the developer to properly reveal the clinical value. This paper exemplifies the methodology using recent studies of synthetic aperture sequential beamforming tissue harmonic imaging.

The Influence of Body Mass Index on Long-Term Fitness from Physical Education in Adolescent Girls

ERIC Educational Resources Information Center

Camhi, Sarah M.; Phillips, Jennie; Young, Deborah R.

2011-01-01

Background: Physical education (PE) can improve physical fitness; however, little research has evaluated PE's long-term influence. The purpose is to determine PE's longitudinal effects on fitness in a group of adolescent girls and to determine whether body mass index (BMI) status influenced any potential effects. Methods: Participants were…

Risky business: Addressing the consequences of predicting violence.

PubMed

Miller, Sarah L; Brodsky, Stanley L

2011-01-01

Despite major advances in the prediction of violence and risk management, risk evaluations are necessarily imperfect. This article focuses on the role of the evaluator in such assessments and addresses the consequences incurred by clinicians involved in conducting risk assessments. We discuss the risks of overpredicting and underpredicting violence with respect to how these risks can influence an evaluator's opinion. Then, we review how law and psychology inform the clinician's work. Finally, in response to the compelling tendency toward overprediction of violence, we propose a preliminary self-assessment guide as a method of examining influences on the evaluator in assessing violence risk.

Experimental and numerical investigation into the influence of loading conditions in biomechanical testing of locking plate fracture fixation devices

PubMed Central

MacLeod, A.; Simpson, A. H. R. W.

2018-01-01

Objectives Secondary fracture healing is strongly influenced by the stiffness of the bone-fixator system. Biomechanical tests are extensively used to investigate stiffness and strength of fixation devices. The stiffness values reported in the literature for locked plating, however, vary by three orders of magnitude. The aim of this study was to examine the influence that the method of restraint and load application has on the stiffness produced, the strain distribution within the bone, and the stresses in the implant for locking plate constructs. Methods Synthetic composite bones were used to evaluate experimentally the influence of four different methods of loading and restraining specimens, all used in recent previous studies. Two plate types and three screw arrangements were also evaluated for each loading scenario. Computational models were also developed and validated using the experimental tests. Results The method of loading was found to affect the gap stiffness strongly (by up to six times) but also the magnitude of the plate stress and the location and magnitude of strains at the bone-screw interface. Conclusions This study demonstrates that the method of loading is responsible for much of the difference in reported stiffness values in the literature. It also shows that previous contradictory findings, such as the influence of working length and very large differences in failure loads, can be readily explained by the choice of loading condition. Cite this article: A. MacLeod, A. H. R. W. Simpson, P. Pankaj. Experimental and numerical investigation into the influence of loading conditions in biomechanical testing of locking plate fracture fixation devices. Bone Joint Res 2018;7:111–120. DOI: 10.1302/2046-3758.71.BJR-2017-0074.R2. PMID:29363522

Effects of Enrichment Presentation and Other Factors on Behavioral Welfare of Pantropical Spotted Dolphin (Stenella attenuata).

PubMed

Perez, Barbara C; Mehrkam, Lindsay R; Foltz, Amanda R; Dorey, Nicole R

2018-01-01

Environmental enrichment is a crucial element of promoting welfare for animals in captivity. However, enrichment programs are not always formally evaluated for their efficacy. Furthermore, there is little empirical evidence of enrichment evaluation for species of small cetaceans in zoological settings. A wide range of variables may potentially influence enrichment efficacy and how it in turn affects behavior. The purpose of this study was to determine the most preferred environmental enrichment, and method of presentation, for a species that has not been well studied in captivity, the pantropical spotted dolphin (Stenella attenuata). In order to determine which enrichment items and method of presentation were most effective at eliciting enrichment interaction, we systematically examined how several variables of enrichment influenced enrichment interaction. The results suggested that presenting enrichment after training sessions influenced interaction with the enrichment. The results also indicated preference for enrichment type and a specific enrichment device. Finally, factors that influenced interaction were also found to influence aberrant behavior. The results support the premise that enrichment be "redefined" for each species and each individual.

[Basic assessment of the CNR measurement method of MRI system in phantom-suggestion for improvement in the CNR evaluation method].

PubMed

Wada, Yoichi; Hara, Takanori; Miyati, Tosiaki

2008-02-20

Many methods of measuring contrast-to-noise ratio (CNR) in magnetic resonance imaging (MRI) have been proposed. However, it is not clear which method is best for evaluating clinical or phantom images. In this study we examined the characteristics of the methods of evaluation proposed in the past, and we proposed new CNR evaluation method that improved noise evaluation. We examined the relationship of theoretical CNR value and measurement value when measurement sensitivity was changed. We measured the relationship between number of signal averaged (NSA) and value of CNR. The CNR value changed greatly according to where noise was measured. The measuring method that we proposed in this study was superior for the following reasons: the measurement point of noise and signal are the same; the influence of the low frequency element is slight; and the correlation of measurements and theoretical value is high. The method that we proposed in this study is useful for evaluating phantom images.

ITPI: Initial Transcription Process-Based Identification Method of Bioactive Components in Traditional Chinese Medicine Formula

PubMed Central

Zhang, Baixia; Li, Yanwen; Zhang, Yanling; Li, Zhiyong; Bi, Tian; He, Yusu; Song, Kuokui; Wang, Yun

2016-01-01

Identification of bioactive components is an important area of research in traditional Chinese medicine (TCM) formula. The reported identification methods only consider the interaction between the components and the target proteins, which is not sufficient to explain the influence of TCM on the gene expression. Here, we propose the Initial Transcription Process-based Identification (ITPI) method for the discovery of bioactive components that influence transcription factors (TFs). In this method, genome-wide chip detection technology was used to identify differentially expressed genes (DEGs). The TFs of DEGs were derived from GeneCards. The components influencing the TFs were derived from STITCH. The bioactive components in the formula were identified by evaluating the molecular similarity between the components in formula and the components that influence the TF of DEGs. Using the formula of Tian-Zhu-San (TZS) as an example, the reliability and limitation of ITPI were examined and 16 bioactive components that influence TFs were identified. PMID:27034696

Method for Evaluating the Corrosion Resistance of Aluminum Metallization of Integrated Circuits under Multifactorial Influence

NASA Astrophysics Data System (ADS)

Kolomiets, V. I.

2018-03-01

The influence of complex influence of climatic factors (temperature, humidity) and electric mode (supply voltage) on the corrosion resistance of metallization of integrated circuits has been considered. The regression dependence of the average time of trouble-free operation t on the mentioned factors has been established in the form of a modified Arrhenius equation that is adequate in a wide range of factor values and is suitable for selecting accelerated test modes. A technique for evaluating the corrosion resistance of aluminum metallization of depressurized CMOS integrated circuits has been proposed.

Influences of the current density on the performances of the chrome-plated layer in deterministic electroplating repair

NASA Astrophysics Data System (ADS)

Xia, H.; Shen, X. M.; Yang, X. C.; Xiong, Y.; Jiang, G. L.

2018-01-01

Deterministic electroplating repair is a novel method for rapidly repairing the attrited parts. By the qualitative contrast and quantitative comparison, influences of the current density on performances of the chrome-plated layer were concluded in this study. The chrome-plated layers were fabricated under different current densities when the other parameters were kept constant. Hardnesses, thicknesses and components, surface morphologies and roughnesses, and wearability of the chrome-plated layers were detected by the Vickers hardness tester, scanning electron microscope / energy dispersive X-ray detector, digital microscope in the 3D imaging mode, and the ball-milling instrument with profilograph, respectively. In order to scientifically evaluate each factor, the experimental data was normalized. A comprehensive evaluation model was founded to quantitative analyse influence of the current density based on analytic hierarchy process method and the weighted evaluation method. The calculated comprehensive evaluation indexes corresponding to current density of 40A/dm2, 45A/dm2, 50A/dm2, 55A/dm2, 60A/dm2, and 65A/dm2 were 0.2246, 0.4850, 0.4799, 0.4922, 0.8672, and 0.1381, respectively. Experimental results indicate that final optimal option was 60A/dm2, and the priority orders were 60A/dm2, 55A/dm2, 45A/dm2, 50A/dm2, 40A/dm2, and 65A/dm2.

Common method biases in behavioral research: a critical review of the literature and recommended remedies.

PubMed

Podsakoff, Philip M; MacKenzie, Scott B; Lee, Jeong-Yeon; Podsakoff, Nathan P

2003-10-01

Interest in the problem of method biases has a long history in the behavioral sciences. Despite this, a comprehensive summary of the potential sources of method biases and how to control for them does not exist. Therefore, the purpose of this article is to examine the extent to which method biases influence behavioral research results, identify potential sources of method biases, discuss the cognitive processes through which method biases influence responses to measures, evaluate the many different procedural and statistical techniques that can be used to control method biases, and provide recommendations for how to select appropriate procedural and statistical remedies for different types of research settings.

Attitude toward, acceptance of and knowledge about female sterilization as a method of contraception.

PubMed

Erlenwein, J; Kundu, S; Schippert, C; Soergel, P; Hillemanns, P; Staboulidou, I

2015-02-01

Surgical sterilization via tubal ligation or the disconnection of the tubes is a method of permanent contraception. The aim of this study was to evaluate the attitude, acceptance and knowledge of women about female sterilization as a method of contraception in terms of the social and cultural backgrounds of those women. Prospective study based on an anonymous questionnaire that analyzed background knowledge, attitude, influence factors and motivation regarding sterilization, as well as the reasons for declining. The questionnaire also attempted to evaluate the effects on the self-esteem of the women, as well as the impact of religious dogma and the related beliefs. One thousand, eight hundred questionnaires were distributed, and 1247 women completed the questionnaire—a response rate of 69.3%. There were mainly positive attitudes toward sterilization as a contraceptive method. Cultural background, including religion and faith; the mother's experiences and point of view; knowledge; family planning and the actual life situation have an influence on the attitudes toward and acceptance of sterilization as a contraceptive method and on the final choice of a contraceptive method. Cultural background and present life situation have a great impact on the attitude toward and acceptance of sterilization as a method of contraception, thus influencing the final choice of a contraceptive method. Detailed counselling about this topic is essential and should be improved. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

System and algorithm for evaluation of human auditory analyzer state

NASA Astrophysics Data System (ADS)

Bachynskiy, Mykhaylo V.; Azarkhov, Oleksandr Yu.; Shtofel, Dmytro Kh.; Horbatiuk, Svitlana M.; Ławicki, Tomasz; Kalizhanova, Aliya; Smailova, Saule; Askarova, Nursanat

2017-08-01

The paper discusses questions of human auditory state evaluation with technical means. It considers the disadvantages of existing clinical audiometry methods and systems. It is proposed to use method for evaluating of auditory analyzer state by means of pulsometry to get the medical study more objective and efficient. It provides for use of two optoelectronic sensors located on the carotid artery and ear lobe, Using this method the biotechnical system for evaluation and stimulation of human auditory analyzer stare wad developed. Its hardware and software were substantiated. Different modes of simulation in the designed system were tested and the influence of the procedure on a patient was studied.

Research on Comprehensive Evaluation Method for Heating Project Based on Analytic Hierarchy Processing

NASA Astrophysics Data System (ADS)

Han, Shenchao; Yang, Yanchun; Liu, Yude; Zhang, Peng; Li, Siwei

2018-01-01

It is effective to reduce haze in winter by changing the distributed heat supply system. Thus, the studies on comprehensive index system and scientific evaluation method of distributed heat supply project are essential. Firstly, research the influence factors of heating modes, and an index system with multiple dimension including economic, environmental, risk and flexibility was built and all indexes were quantified. Secondly, a comprehensive evaluation method based on AHP was put forward to analyze the proposed multiple and comprehensive index system. Lastly, the case study suggested that supplying heat with electricity has great advantage and promotional value. The comprehensive index system of distributed heating supply project and evaluation method in this paper can evaluate distributed heat supply project effectively and provide scientific support for choosing the distributed heating project.

Influence of forest and rangeland management on anadromous fish habitat in Western North America: economic considerations.

Treesearch

William R. tech. ed. Meehan

1985-01-01

Although many effects of forest and rangeland management on anadromous fisheries are difficult to measure, economic methods for the evaluation of costs and benefits can be helpful. Such methods can be used to address questions of equity as well as efficiency. Evaluations of equity can show who bears the costs and who captures the benefits of management actions, but...

Evaluation of test procedures for hydrogen environment embrittlement

NASA Technical Reports Server (NTRS)

Nelson, H. G.

1974-01-01

Report presents discussion of three common and primary influences on embrittlement process. Application of theoretical considerations to design of test coupons and methods is illustrated for both internal and external hydrogen embrittlement. Acceptable designs and methods are indicated.

Influence of the Extractive Method on the Recovery of Phenolic Compounds in Different Parts of Hymenaea martiana Hayne

PubMed Central

Oliveira, Fernanda Granja da Silva; de Lima-Saraiva, Sarah Raquel Gomes; Oliveira, Ana Paula; Rabêlo, Suzana Vieira; Rolim, Larissa Araújo; Almeida, Jackson Roberto Guedes da Silva

2016-01-01

Background: Popularly known as “jatobá,” Hymenaea martiana Hayne is a medicinal plant widely used in the Brazilian Northeast for the treatment of various diseases. Objective: The aim of this study was to evaluate the influence of different extractive methods in the production of phenolic compounds from different parts of H. martiana. Materials and Methods: The leaves, bark, fruits, and seeds were dried, pulverized, and submitted to maceration, ultrasound, and percolation extractive methods, which were evaluated for yield, visual aspects, qualitative phytochemical screening, phenolic compound content, and total flavonoids. Results: The highest results of yield were obtained from the maceration of the leaves, which may be related to the contact time between the plant drug and solvent. The visual aspects of the extracts presented some differences between the extractive methods. The phytochemical screening showed consistent data with other studies of the genus. Both the vegetal part as the different extractive methods influenced significantly the levels of phenolic compounds, and the highest content was found in the maceration of the barks, even more than the content found previously. No differences between the levels of total flavonoids were significant. The highest concentration of total flavonoids was found in the ultrasound of the barks, followed by maceration on this drug. According to the results, the barks of H. martiana presented the highest total flavonoid contents. Conclusion: The results demonstrate that both the vegetable and the different extractive methods influenced significantly various parameters obtained in the various extracts, demonstrating the importance of systematic comparative studies for the development of pharmaceuticals and cosmetics. SUMMARY The phytochemical screening showed consistent data with other studies of the genus HymenaeaBoth the vegetable part and the different extractive methods influenced significantly various parameters obtained in the various extracts, including the levels of phenolic compoundsThe barks of H. martiana presented the highest total phenolic and flavonoid contents. PMID:27695267

Factors that influence the efficiency of beef and dairy cattle recording system in Kenya: A SWOT-AHP analysis.

PubMed

Wasike, Chrilukovian B; Magothe, Thomas M; Kahi, Alexander K; Peters, Kurt J

2011-01-01

Animal recording in Kenya is characterised by erratic producer participation and high drop-out rates from the national recording scheme. This study evaluates factors influencing efficiency of beef and dairy cattle recording system. Factors influencing efficiency of animal identification and registration, pedigree and performance recording, and genetic evaluation and information utilisation were generated using qualitative and participatory methods. Pairwise comparison of factors was done by strengths, weaknesses, opportunities and threats-analytical hierarchical process analysis and priority scores to determine their relative importance to the system calculated using Eigenvalue method. For identification and registration, and evaluation and information utilisation, external factors had high priority scores. For pedigree and performance recording, threats and weaknesses had the highest priority scores. Strengths factors could not sustain the required efficiency of the system. Weaknesses of the system predisposed it to threats. Available opportunities could be explored as interventions to restore efficiency in the system. Defensive strategies such as reorienting the system to offer utility benefits to recording, forming symbiotic and binding collaboration between recording organisations and NARS, and development of institutions to support recording were feasible.

Applying systems theory to the evaluation of a whole school approach to violence prevention.

PubMed

Kearney, Sarah; Leung, Loksee; Joyce, Andrew; Ollis, Debbie; Green, Celia

2016-02-01

Issue addressed Our Watch led a complex 12-month evaluation of a whole school approach to Respectful Relationships Education (RRE) implemented in 19 schools. RRE is an emerging field aimed at preventing gender-based violence. This paper will illustrate how from an implementation science perspective, the evaluation was a critical element in the change process at both a school and policy level. Methods Using several conceptual approaches from systems science, the evaluation sought to examine how the multiple systems layers - student, teacher, school, community and government - interacted and influenced each other. A distinguishing feature of the evaluation included 'feedback loops'; that is, evaluation data was provided to participants as it became available. Evaluation tools included a combination of standardised surveys (with pre- and post-intervention data provided to schools via individualised reports), reflection tools, regular reflection interviews and summative focus groups. Results Data was shared during implementation with project staff, department staff and schools to support continuous improvement at these multiple systems levels. In complex settings, implementation can vary according to context; and the impact of evaluation processes, tools and findings differed across the schools. Interviews and focus groups conducted at the end of the project illustrated which of these methods were instrumental in motivating change and engaging stakeholders at both a school and departmental level and why. Conclusion The evaluation methods were a critical component of the pilot's approach, helping to shape implementation through data feedback loops and reflective practice for ongoing, responsive and continuous improvement. Future health promotion research on complex interventions needs to examine how the evaluation itself is influencing implementation. So what? The pilot has demonstrated that the evaluation, including feedback loops to inform project activity, were an asset to implementation. This has implications for other health promotion activities, where evaluation tools could be utilised to enhance, rather than simply measure, an intervention. The findings are relevant to a range of health promotion research activities because they demonstrate the importance of meta-evaluation techniques that seek to understand how the evaluation itself was influencing implementation and outcomes.

Efficacy of evaluation of rooster sperm morphology using different staining methods.

PubMed

Lukaszewicz, E; Jerysz, A; Partyka, A; Siudzińska, A

2008-12-01

This work focused on inexpensive methods of evaluation fowl sperm morphology, based on eosin-nigrosin smears, which can determine disorders in spermatogenesis and can be recommended for evaluating the fertilising potency and selecting males in flocks reproduced by artificial insemination. Four fowl breeds (Black Minorca, Italian Partridge, Forwerk and Greenleg Partridge) were used to determine the efficacy of sperm morphology evaluation using four eosin-nigrosin staining methods (according to Blom, Bakst and Cecil, Morisson, Jaśkowski) and three examiners of different experience (high, medium, novice). There were significant (P< or = 0.01) differences in sperm morphology between Blom's staining method and those of Bakst and Cecil, Morisson or Jaśkowski, irrespective of fowl breed and examiners experience. Blom stain caused sperm head swelling and showed a drastic reduction in the proportion of live spermatozoa with normal morphology. The staining method had a greater influence on sperm morphology evaluation than the experience of the examiners.

Factors Influencing Physical Therapists' Use of Standardized Measures of Walking Capacity Poststroke Across the Care Continuum

PubMed Central

Pattison, Kira M.; Brooks, Dina; Cameron, Jill I.

2015-01-01

Background The use of standardized assessment tools is an element of evidence-informed rehabilitation, but physical therapists report administering these tools inconsistently poststroke. An in-depth understanding of physical therapists' approaches to walking assessment is needed to develop strategies to advance assessment practice. Objectives The objective of this study was to explore the methods physical therapists use to evaluate walking poststroke, reasons for selecting these methods, and the use of assessment results in clinical practice. Design A qualitative descriptive study involving semistructured telephone interviews was conducted. Methods Registered physical therapists assessing a minimum of 10 people with stroke per year in Ontario, Canada, were purposively recruited from acute care, rehabilitation, and outpatient settings. Interviews were audiotaped and transcribed verbatim. Transcripts were coded line by line by the interviewer. Credibility was optimized through triangulation of analysts, audit trail, and collection of field notes. Results Study participants worked in acute care (n=8), rehabilitation (n=11), or outpatient (n=9) settings and reported using movement observation and standardized assessment tools to evaluate walking. When selecting methods to evaluate walking, physical therapists described being influenced by a hierarchy of factors. Factors included characteristics of the assessment tool, the therapist, the workplace, and patients, as well as influential individuals or organizations. Familiarity exerted the primary influence on adoption of a tool into a therapist's assessment repertoire, whereas patient factors commonly determined daily use. Participants reported using the results from walking assessments to communicate progress to the patient and health care professionals. Conclusions Multilevel factors influence physical therapists' adoption and daily administration of standardized tools to assess walking. Findings will inform knowledge translation efforts aimed at increasing the standardized assessment of walking poststroke. PMID:25929532

The research on user behavior evaluation method for network state

NASA Astrophysics Data System (ADS)

Zhang, Chengyuan; Xu, Haishui

2017-08-01

Based on the correlation between user behavior and network running state, this paper proposes a method of user behavior evaluation based on network state. Based on the analysis and evaluation methods in other fields of study, we introduce the theory and tools of data mining. Based on the network status information provided by the trusted network view, the user behavior data and the network state data are analysed. Finally, we construct the user behavior evaluation index and weight, and on this basis, we can accurately quantify the influence degree of the specific behavior of different users on the change of network running state, so as to provide the basis for user behavior control decision.

Moving Away from Exhaustion: How Core Self-Evaluations Influence Academic Burnout

PubMed Central

Lian, Penghu; Sun, Yunfeng; Ji, Zhigang; Li, Hanzhong; Peng, Jiaxi

2014-01-01

Background Academic burnout refers to students who have low interest, lack of motivation, and tiredness in studying. Studies concerning how to prevent academic burnout are rare. Objective The present study aimed to investigate the impact of core self-evaluations on the academic burnout of university students, and mainly focused on the confirmation of the mediator role of life satisfaction. Methods A total of 470 university students accomplished the core self-evaluation scale, Satisfaction with Life, and academic burnout scale. Results Both core self-evaluations and life satisfaction were significantly correlated with academic burnout. Structural equation modeling indicated that life satisfaction partially mediated the relationship between core self-evaluations and academic burnout. Conclusions Core self-evaluations significantly influence academic burnout and are partially mediated by life satisfaction. PMID:24489857

Maintaining the competitiveness of the American fisheries society journals: an assessment based on influence and cost-effectiveness

USGS Publications Warehouse

Hewitt, David A.; Link, Jason S.; Steinich, Dave R.; Wahl, David H.; Mather, Martha E.

2009-01-01

Recent changes in the landscape of scientific publishing prompted the Publications Overview Committee of the American Fisheries Society (AFS) to review the Society's portfolio of scientific journals. We evaluated journals based on metrics in two categories: (1) citation-based measures of the influence of a journal on the scientific literature, and (2) measures of the cost-effectiveness of a journal (citation rate adjusted for subscription cost). Over the long-term, we found that ecology journals had far stronger citation-based influence than fisheries and aquatic sciences journals, and that journals publishing primarily basic research had stronger influence than journals publishing applied research (including four AFS journals and Fisheries magazine). In evaluating the current status of fisheries and aquatic sciences journals, we found that metrics of influence and cost-effectiveness provided considerably different portrayals of journals relative to their peers. In terms of citation-based influence, we found that the AFS journal Transactions of the American Fisheries Society (TAFS) and Fisheries magazine were competitive with highly regarded peer fisheries journals, but that North American Journal of Aquaculture (NAJA) and Journal of Aquatic Animal Health (JAAH) were less influential than their peers. The citation-based influence of North American Journal of Fisheries Management (NAJFM) was intermediate between TAFS/Fisheries and NAJA/JAAH. For journals like NAJFM and NAJA, we expect that much of the scientific influence on policy and management is not captured by citations in the primary literature, and alternative methods of evaluation may be needed. All of the AFS journals ranked highly with regard to cost-effectiveness because their subscription costs are low, and these rankings are in accordance with membership needs and the strategic mission of AFS to provide broad and timely dissemination of scientific information. We conclude by suggesting ways to increase the influence of AFS journals without compromising their accessibility and affordability, and offer advice about methods and frequency for future journal evaluations.

Investigating Mandatory Peer Review of Teaching In Schools

ERIC Educational Resources Information Center

Brix, Jacinta; Grainger, Peter; Hill, Angela

2014-01-01

Accountability agendas are influencing the secondary education sector in Australian schools. Analysis of student achievement, student feedback mechanisms and personal reflection are forming part of these agendas as methods of teacher evaluation. Additionally, and more recently, teacher evaluation through "peer review" is emerging as a…

The potential influence of rain on airfoil performance

NASA Technical Reports Server (NTRS)

Dunham, R. Earl, Jr.

1987-01-01

The potential influence of heavy rain on airfoil performance is discussed. Experimental methods for evaluating rain effects are reviewed. Important scaling considerations for extrapolating model data are presented. It is shown that considerable additional effort, both analytical and experimental, is necessary to understand the degree of hazard associated with flight operations in rain.

Evaluating the Wider Outcomes of Schools: Complex Systems Modelling for Leadership Decisioning

ERIC Educational Resources Information Center

Crick, Ruth Deakin; Barr, Steven; Green, Howard; Pedder, David

2017-01-01

A continuing challenge for the education system is how to evaluate the wider outcomes of schools. Wider measures of success--such as citizenship or lifelong learning--influence each other and emerge over time from complex interactions between students, teachers and leaders, and the wider community. Unless methods are found to evaluate these…

Temperature distributions measurement of high intensity focused ultrasound using a thin-film thermocouple array and estimation of thermal error caused by viscous heating.

PubMed

Matsuki, Kosuke; Narumi, Ryuta; Azuma, Takashi; Yoshinaka, Kiyoshi; Sasaki, Akira; Okita, Kohei; Takagi, Shu; Matsumoto, Yoichiro

2013-01-01

To improve the throughput of high intensity focused ultrasound (HIFU) treatment, we have considered a focus switching method at two points. For this method, it is necessary to evaluate the thermal distribution under exposure to ultrasound. The thermal distribution was measured using a prototype thin-film thermocouple array, which has the advantage of minimizing the influence of the thermocouple on the acoustic and temperature fields. Focus switching was employed to enlarge the area of temperature increase and evaluate the proposed evaluation parameters with respect to safety and uniformity. The results indicate that focus switching can effectively expand the thermal lesion while maintaining a steep thermal boundary. In addition, the influence caused by the thin-film thermocouple array was estimated experimentally. This thermocouple was demonstrated to be an effective tool for the measurement of temperature distributions induced by HIFU.

Overcoming structural constraints to patient utilization of electronic medical records: a critical review and proposal for an evaluation framework.

PubMed

Winkelman, Warren J; Leonard, Kevin J

2004-01-01

There are constraints embedded in medical record structure that limit use by patients in self-directed disease management. Through systematic review of the literature from a critical perspective, four characteristics that either enhance or mitigate the influence of medical record structure on patient utilization of an electronic patient record (EPR) system have been identified: environmental pressures, physician centeredness, collaborative organizational culture, and patient centeredness. An evaluation framework is proposed for use when considering adaptation of existing EPR systems for online patient access. Exemplars of patient-accessible EPR systems from the literature are evaluated utilizing the framework. From this study, it appears that traditional information system research and development methods may not wholly capture many pertinent social issues that arise when expanding access of EPR systems to patients. Critically rooted methods such as action research can directly inform development strategies so that these systems may positively influence health outcomes.

Limitations of a metabolic network-based reverse ecology method for inferring host-pathogen interactions.

PubMed

Takemoto, Kazuhiro; Aie, Kazuki

2017-05-25

Host-pathogen interactions are important in a wide range of research fields. Given the importance of metabolic crosstalk between hosts and pathogens, a metabolic network-based reverse ecology method was proposed to infer these interactions. However, the validity of this method remains unclear because of the various explanations presented and the influence of potentially confounding factors that have thus far been neglected. We re-evaluated the importance of the reverse ecology method for evaluating host-pathogen interactions while statistically controlling for confounding effects using oxygen requirement, genome, metabolic network, and phylogeny data. Our data analyses showed that host-pathogen interactions were more strongly influenced by genome size, primary network parameters (e.g., number of edges), oxygen requirement, and phylogeny than the reserve ecology-based measures. These results indicate the limitations of the reverse ecology method; however, they do not discount the importance of adopting reverse ecology approaches altogether. Rather, we highlight the need for developing more suitable methods for inferring host-pathogen interactions and conducting more careful examinations of the relationships between metabolic networks and host-pathogen interactions.

Research status and evaluation system of heat source evaluation method for central heating

NASA Astrophysics Data System (ADS)

Sun, Yutong; Qi, Junfeng; Cao, Yi

2018-02-01

The central heating boiler room is a regional heat source heating center. It is also a kind of the urban environment pollution, it is an important section of building energy efficiency. This article through to the evaluation method of central heating boiler room and overviews of the researches during domestic and overseas, summarized the main influence factors affecting energy consumption of industrial boiler under the condition of stable operation. According to the principle of establishing evaluation index system. We can find that is great significance in energy saving and environmental protection for the content of the evaluation index system of the centralized heating system.

Comprehensive evaluation of environmental and economic benefits of China's urban underground transportation construction projects.

PubMed

Yang, Xiaobin; Chen, Zhilong; Guo, Dongjun

2015-07-01

Urban underground transportation projects are introduced to address problems of scarce green land and traffic pollution. As construction of urban underground transportation is still in its infancy, there is no definite quantitative measurement on whether the construction is beneficial and what influences it will place on the region in China. This study intends to construct a comprehensive evaluation method for evaluating social, economic and environmental benefits of urban underground transportation projects and proposes the concept, role and principle for evaluation of environmental and economic benefits. It figures out relationship between the environment and factors of city development. It also summarizes three relevant factors, including transportation, biophysics and social economy, and works out indicators to evaluate the influence of urban underground transportation construction. Based on Contingent Valuation Method (CVM), Cost of Illness Approach (CIA), Human Capital Approach (HCA), this paper constructs 13 monetization calculation models for social, economic and environmental benefits in response to seven aspects, namely, reducing noise pollution and air pollution, using land efficiently, improving traffic safety, reducing traffic congestion, saving shipping time and minimizing transportation costs.

The effect of mixing method on tricalcium silicate-based cement.

PubMed

Duque, J A; Fernandes, S L; Bubola, J P; Duarte, M A H; Camilleri, J; Marciano, M A

2018-01-01

To evaluate the effect of three methods of mixing on the physical and chemical properties of tricalcium silicate-based cements. The materials evaluated were MTA Angelus and Portland cement with 20% zirconium oxide (PC-20-Zr). The cements were mixed using a 3 : 1 powder-to-liquid ratio. The mixing methods were manual (m), trituration (tr) and ultrasonic (us) activation. The materials were characterized by means of scanning electron microscope (SEM) and energy dispersive X-ray spectroscopy. Flowability was analysed according to ANSI/ADA 57/2012. Initial and final setting times were assessed following ASTM C266/08. Volume change was evaluated using a micro-CT volumetric method. Solubility was analysed according to ADA 57/2012. pH and calcium ion release were measured after 3, 24, 72 and 168 h. Statistical analysis was performed using two-way analysis of variance. The level of significance was set at P = 0.05. The SEM analysis revealed that ultrasonic activation was associated with a homogeneous distribution of particles. Flowability, volume change and initial setting time were not influenced by the mixing method (P > 0.05). Solubility was influenced by the mixing method (P < 0.05). For pH, at 168 h, significant differences were found between MTA-m and PC-20-Zr-m (P < 0.05). For calcium ion release, PC-20-Zr-tr had higher values than MTA-m at 3 h, and MTA-tr had higher values than PC-20-Zr-m at 168 h (P < 0.05). The ultrasonic and trituration methods led to higher calcium ion release and pH compared with manual mixing for all cements, whilst the ultrasonic method produced smaller particles for the PC-20-Zr cement. Flow, setting times and volume change were not influenced by the mixing method used; however, it did have an impact on solubility. © 2017 International Endodontic Journal. Published by John Wiley & Sons Ltd.

Indicators and Methods for Evaluating Economic, Ecosystem ...

EPA Pesticide Factsheets

The U.S. Human Well-being Index (HWBI) is a composite measure that incorporates economic, environmental, and societal well-being elements through the eight domains of connection to nature, cultural fulfillment, education, health, leisure time, living standards, safety and security, and social cohesion (USEPA 2012a; Smith et al. 2013). Twenty-eight services, represented by a collection of indicators and metrics, have been identified as influencing these domains of human well-being. By taking an inventory of stocks or measuring the results of a service, a relationship function can be derived to understand how changes in the provisioning of that service can influence the HWBI. An extensive review of existing services was performed to identify current services, indicators and metrics in use. This report describes the indicators and methods we have selected to evaluate the provisioning of economic, ecosystem, and social services related to human well-being. Provide metadata and methods for calculating services provisioning scores for HWBI modeling framework

Evaluating the influence of particulate matter on spectroscopic measurements of a combusting flow

NASA Astrophysics Data System (ADS)

Herlan, Jonathan; Murray, Nathan

2017-11-01

An adiabatic table-top burner has been used to develop a method for estimating the temperature and concentration of OH in a measurement volume of a non-premixed, hydrogen-air flame. The estimation method uses a nonlinear curve-fitting routine to compare experimental absorption spectra with a model derived, using statistical mechanics, from the Beer-Lambert law. With the aim of applying this method to the analysis of rocket exhaust plumes, this study evaluates whether or not it provides faithful estimates of temperature and OH concentration when the combusting flow contains particulate matter-such as soot or tracers used for particle image velocimetry (PIV) measurements. The hydrogen line of the table-top burner will be seeded with alumina, Al2O3, particles and their influence on spectroscopic measurements elucidated. The authors wish to thank Mr. Bernard Jansen for his support and insight in laboratory activities.

A new method for calculating ecological flow: Distribution flow method

NASA Astrophysics Data System (ADS)

Tan, Guangming; Yi, Ran; Chang, Jianbo; Shu, Caiwen; Yin, Zhi; Han, Shasha; Feng, Zhiyong; Lyu, Yiwei

2018-04-01

A distribution flow method (DFM) and its ecological flow index and evaluation grade standard are proposed to study the ecological flow of rivers based on broadening kernel density estimation. The proposed DFM and its ecological flow index and evaluation grade standard are applied into the calculation of ecological flow in the middle reaches of the Yangtze River and compared with traditional calculation method of hydrological ecological flow, method of flow evaluation, and calculation result of fish ecological flow. Results show that the DFM considers the intra- and inter-annual variations in natural runoff, thereby reducing the influence of extreme flow and uneven flow distributions during the year. This method also satisfies the actual runoff demand of river ecosystems, demonstrates superiority over the traditional hydrological methods, and shows a high space-time applicability and application value.

Evaluation of passenger health risk assessment of sustainable indoor air quality monitoring in metro systems based on a non-Gaussian dynamic sensor validation method.

PubMed

Kim, MinJeong; Liu, Hongbin; Kim, Jeong Tai; Yoo, ChangKyoo

2014-08-15

Sensor faults in metro systems provide incorrect information to indoor air quality (IAQ) ventilation systems, resulting in the miss-operation of ventilation systems and adverse effects on passenger health. In this study, a new sensor validation method is proposed to (1) detect, identify and repair sensor faults and (2) evaluate the influence of sensor reliability on passenger health risk. To address the dynamic non-Gaussianity problem of IAQ data, dynamic independent component analysis (DICA) is used. To detect and identify sensor faults, the DICA-based squared prediction error and sensor validity index are used, respectively. To restore the faults to normal measurements, a DICA-based iterative reconstruction algorithm is proposed. The comprehensive indoor air-quality index (CIAI) that evaluates the influence of the current IAQ on passenger health is then compared using the faulty and reconstructed IAQ data sets. Experimental results from a metro station showed that the DICA-based method can produce an improved IAQ level in the metro station and reduce passenger health risk since it more accurately validates sensor faults than do conventional methods. Copyright © 2014 Elsevier B.V. All rights reserved.

[Evaluation of the influence of sterilization method on the stability of carboxymethyl cellulose wound dressing].

PubMed

Muselík, Jan; Wojnarová, Lenka; Masteiková, Ruta; Sopuch, Tomáš

2013-04-01

Carboxymethyl cellulose, especially its sodium salt, is a versatile pharmaceutical excipient. From a therapeutic point of view, sodium salt of carboxymethyl cellulose is used in the production of modern wound dressings to allow moist wound healing. Wound dressings must be sterile and stable throughout their shelf life and have to be able to withstand different temperature conditions. At the present time, a number of sterilization methods are available. In the case of polymeric materials, the selected sterilization process must not induce any changes in the polymer structure, such as polymer chains cleavage, changes in cross-linking, etc. This paper evaluates the influence of different sterilization methods (γ-radiation, β-radiation, ethylene oxide) on the stability of carboxymethyl cellulose and the results of long-term and accelerated stability testing. Evaluation of samples was performed using size-exclusion chromatography. The obtained results showed that ethylene oxide sterilization was the least aggressive variant of the sterilization methods tested. When the γ-radiation sterilization was used, the changes in the size of the carboxymethyl cellulose molecule occurred. In the course of accelerated and long term stability studies, no further degradation changes were observed, and thus sterilized samples are suitable for long term storage.

Assessing Locomotor Activity in Larval Zebrafish: Influence of Extrinsic and Intrinsic Variables

EPA Science Inventory

The U.S. Environmental Protection Agency is evaluating methods to screen and prioritize large numbers of chemicals for developmental toxicity. We are exploring methods to detect developmentally neurotoxic chemicals using zebrafish behavior at 6 days of age. The behavioral paradig...

Differences between Cheddar cheese manufactured by the milled-curd and stirred-curd methods using different commercial starters.

PubMed

Shakeel-ur-Rehman; Drake, M A; Farkye, N Y

2008-01-01

Traditionally, Cheddar cheese is made by the milled-curd method. However, because of the mechanization of cheese making and time constraints, the stirred-curd method is more commonly used by many large-scale commercial manufacturers. This study was undertaken to evaluate quality differences during ripening (at 2 and 8 degrees C) of Cheddar cheese made by the milled-curd and stirred-curd methods, using 4 different commercial starters. Twenty-four vats (4 starters x 2 methods x 3 replicates) were made, with approximately 625 kg of pasteurized (72 degrees C x 16 s) whole milk in each vat. Fat, protein, and salt contents of the cheeses were not affected by the starter. Starter cell densities in cheese were not affected by the method of manufacture. Nonstarter lactic acid bacteria counts at 90, 180, and 270 d were influenced by the manufacturing method, with a higher trend in milled-curd cheeses. Proteolysis in cheese (percentage of water-soluble N) was influenced by the starter and manufacturing method (270 d). Sensory analysis by a trained descriptive panel (n = 8) revealed differences in cooked, whey, sulfur, brothy, milk fat, umami, and bitter attributes caused by the starter, whereas only brothy flavor was influenced by storage temperature. The method of manufacture influenced diacetyl, sour, and salty flavors.

Methods to Evaluate Influence of Onsite Septic Wastewater-Treatment Systems on Base Flow in Selected Watersheds in Gwinnett County, Georgia, October 2007

USGS Publications Warehouse

Landers, Mark N.; Ankcorn, Paul D.

2008-01-01

The influence of onsite septic wastewater-treatment systems (OWTS) on base-flow quantity needs to be understood to evaluate consumptive use of surface-water resources by OWTS. If the influence of OWTS on stream base flow can be measured and if the inflow to OWTS is known from water-use data, then water-budget approaches can be used to evaluate consumptive use. This report presents a method to evaluate the influence of OWTS on ground-water recharge and base-flow quantity. Base flow was measured in Gwinnett County, Georgia, during an extreme drought in October 2007 in 12 watersheds that have low densities of OWTS (22 to 96 per square mile) and 12 watersheds that have high densities (229 to 965 per square mile) of OWTS. Mean base-flow yield in the high-density OWTS watersheds is 90 percent greater than in the low-density OWTS watersheds. The density of OWTS is statistically significant (p-value less than 0.01) in relation to base-flow yield as well as specific conductance. Specific conductance of base flow increases with OWTS density, which may indicate influence from treated wastewater. The study results indicate considerable unexplained variation in measured base-flow yield for reasons that may include: unmeasured processes, a limited dataset, and measurement errors. Ground-water recharge from a high density of OWTS is assumed to be steady state from year to year so that the annual amount of increase in base flow from OWTS is expected to be constant. In dry years, however, OWTS contributions represent a larger percentage of natural base flow than in wet years. The approach of this study could be combined with water-use data and analyses to estimate consumptive use of OWTS.

Mutual influence of molecular diffusion in gas and surface phases

NASA Astrophysics Data System (ADS)

Hori, Takuma; Kamino, Takafumi; Yoshimoto, Yuta; Takagi, Shu; Kinefuchi, Ikuya

2018-01-01

We develop molecular transport simulation methods that simultaneously deal with gas- and surface-phase diffusions to determine the effect of surface diffusion on the overall diffusion coefficients. The phenomenon of surface diffusion is incorporated into the test particle method and the mean square displacement method, which are typically employed only for gas-phase transport. It is found that for a simple cylindrical pore, the diffusion coefficients in the presence of surface diffusion calculated by these two methods show good agreement. We also confirm that both methods reproduce the analytical solution. Then, the diffusion coefficients for ink-bottle-shaped pores are calculated using the developed method. Our results show that surface diffusion assists molecular transport in the gas phase. Moreover, the surface tortuosity factor, which is known to be uniquely determined by physical structure, is influenced by the presence of gas-phase diffusion. This mutual influence of gas-phase diffusion and surface diffusion indicates that their simultaneous calculation is necessary for an accurate evaluation of the diffusion coefficients.

Influence analysis of fluctuation parameters on flow stability based on uncertainty method

NASA Astrophysics Data System (ADS)

Meng, Tao; Fan, Shangchun; Wang, Chi; Shi, Huichao

2018-05-01

The relationship between flow fluctuation and pressure in a flow facility is studied theoretically and experimentally in this paper, and a method for measuring the flow fluctuation is proposed. According to the synchronicity of pressure and flow fluctuation, the amplitude of the flow fluctuation is calculated using the pressure measured in the flow facility and measurement of the flow fluctuation in a wide range of frequency is realized. Based on the method proposed, uncertainty analysis is used to evaluate the influences of different parameters on the flow fluctuation by the help of a sample-based stochastic model established and the parameters that have great influence are found, which can be a reference for the optimization design and the stability improvement of the flow facility.

Influences on self-evaluation during a clinical skills programme for nurses.

PubMed

Yeo, J; Steven, A; Pearson, P; Price, C

2010-05-01

Education has moved from teacher to student-centred practices. Increasing emphasis is placed on 'life-long' learning in the context of a rapidly changing knowledge base. Self-evaluation is seen as one strategy to facilitate student-centred continuous professional development. The literature, however, suggests that learners' ability to self-assess is mixed, and little is known regarding how students perform self-assessment. This study focussed on senior nurses undertaking a scenario-based clinical skills course. Learners were asked to self-evaluate several times during the course. This research explored the influences on using the self-evaluation exercise. The study drew upon grounded theory methodology and was influenced by constructionist and postmodernist theories. Three methods of data collection were used: semi-structured interviews, observation of supervision sessions and recording of the numerical self-evaluation ratings. Multiple interviews with students (n = 14) and the educational supervisor (n = 1) were conducted. Thematic analysis and data collection were conducted iteratively. The study found that feeling confident and stating that confidence were not necessarily the same. Feeling confident was complex, influenced by changing perceptions of clinical skills and credibility. Changing frames of reference were used to judge feelings of confidence. Stating confidence appeared to be socially negotiated, influenced by social acceptability considerations such as modesty and the need to show progress over time. The discourses of empowerment and surveillance were influential and self-evaluation is discussed using Foucault's theory of governmentality, illustrating how learners can be both empowered and controlled through self-evaluation. Further consideration of the socially constructed nature of self-evaluations would benefit both educational practice and future research.

Method for technology-delivered healthcare measures.

PubMed

Kramer-Jackman, Kelli Lee; Popkess-Vawter, Sue

2011-12-01

Current healthcare literature lacks development and evaluation methods for research and practice measures administered by technology. Researchers with varying levels of informatics experience are developing technology-delivered measures because of the numerous advantages they offer. Hasty development of technology-delivered measures can present issues that negatively influence administration and psychometric properties. The Method for Technology-delivered Healthcare Measures is designed to systematically guide the development and evaluation of technology-delivered measures. The five-step Method for Technology-delivered Healthcare Measures includes establishment of content, e-Health literacy, technology delivery, expert usability, and participant usability. Background information and Method for Technology-delivered Healthcare Measures steps are detailed.

Evaluation of the impact of observations on blended sea surface winds in a two-dimensional variational scheme using degrees of freedom

NASA Astrophysics Data System (ADS)

Wang, Ting; Xiang, Jie; Fei, Jianfang; Wang, Yi; Liu, Chunxia; Li, Yuanxiang

2017-12-01

This paper presents an evaluation of the observational impacts on blended sea surface winds from a two-dimensional variational data assimilation (2D-Var) scheme. We begin by briefly introducing the analysis sensitivity with respect to observations in variational data assimilation systems and its relationship with the degrees of freedom for signal (DFS), and then the DFS concept is applied to the 2D-Var sea surface wind blending scheme. Two methods, a priori and a posteriori, are used to estimate the DFS of the zonal ( u) and meridional ( v) components of winds in the 2D-Var blending scheme. The a posteriori method can obtain almost the same results as the a priori method. Because only by-products of the blending scheme are used for the a posteriori method, the computation time is reduced significantly. The magnitude of the DFS is critically related to the observational and background error statistics. Changing the observational and background error variances can affect the DFS value. Because the observation error variances are assumed to be uniform, the observational influence at each observational location is related to the background error variance, and the observations located at the place where there are larger background error variances have larger influences. The average observational influence of u and v with respect to the analysis is about 40%, implying that the background influence with respect to the analysis is about 60%.

Factors Influencing Assessment Quality in Higher Vocational Education

ERIC Educational Resources Information Center

Baartman, Liesbeth; Gulikers, Judith; Dijkstra, Asha

2013-01-01

The development of assessments that are fit to assess professional competence in higher vocational education requires a reconsideration of assessment methods, quality criteria and (self)evaluation. This article examines the self-evaluations of nine courses of a large higher vocational education institute. Per course, 4-11 teachers and 3-10…

[Influence of slime production and adhesion of Candida sp. on biofilm formation].

PubMed

Ciok-Pater, Emilia; Smolak, Przemysław; Wróblewska, Joanna; Gospodarek, Eugenia

2011-01-01

The increase of fungal infections in recent years is connected with the progress in medicine. The vast usage of biomaterials is an inseparable element of contemporary medicine but it also leads to development of infections. Yeast-like fungi Candida albicans are still the main pathogen of candidiasis. The ability to slime production and adhesion to polystyrene of Candida sp. on different surfaces can cause to form biofilm on surfaces of biomaterials used in production of catheters, drains and prosthesis. The aim of the study was to evaluate the influence of slime production and adhesion to polystyrene, of Candida sp. on biofilm formation on different biomaterials. 50 strains of Candida sp. were examined. They isolated from ill to Clinics of Anesthesiology and Intensive Therapy University Hospital No 1 of dr. A. Jurasza in Bydgoszcz. The ability to slime production was evaluated by Christensen method in modification Davenport and Branchini methods. The adhesion to polystyrene was evaluated by Richards et el method. The ability to produce biofilm biomaterials by the studied fungi was measured after 72 hours of incubation at 37 degrees C on different biomaterials. Yeast-like fungi Candida sp. fabricating slime and adhesion forming frequently biofilm on surface researched of biomaterials. Influence of chosen biological specificity ascertain on the ability to produce biofilm on surfaces of siliconized latex and polyvinylchloride.

Keeping Great Teachers: A Case Study on the Impact and Implementation of a Pilot Teacher Evaluation System

ERIC Educational Resources Information Center

Robertson-Kraft, Claire; Zhang, Rosaline S.

2018-01-01

A growing body of research examines the impact of recent teacher evaluation systems; however, we have limited knowledge on how these systems influence teacher retention. This study uses a mixed-methods design to examine teacher retention patterns during the pilot year of an evaluation system in an urban school district in Texas. We used…

Retrieval of phase-derivative discontinuities in digital speckle pattern interferometry fringes using the Wigner-Ville distribution

NASA Astrophysics Data System (ADS)

Federico, Alejandro; Kaufmann, Guillermo H.

2004-08-01

We evaluate the application of the Wigner-Ville distribution (WVD) to measure phase gradient maps in digital speckle pattern interferometry (DSPI), when the generated correlation fringes present phase discontinuities. The performance of the WVD method is evaluated using computer-simulated fringes. The influence of the filtering process to smooth DSPI fringes and additional drawbacks that emerge when this method is applied are discussed. A comparison with the conventional method based on the continuous wavelet transform in the stationary phase approximation is also presented.

Comparison of methods for evaluating ground-contact copper preservative depletion

Treesearch

Stan Lebow; Steven Halverson

2008-01-01

Depletion of the biocide(s) used to treat wood has a major influence on service life and environmental concerns. However, little is known about the extent of depletion from the specific leaching method employed. Wood treated with two types of copper-based preservatives were leached using three different methods: field stakes (American Wood Protection Association (AWPA...

Hardness evaluation of cured urea-formaldehyde resins with different formaldehyde/urea mole ratios using nanoindentation method

Treesearch

Byung-Dae Park; Charles R. Frihart; Yan Yu; Adya P. Singh

2013-01-01

To understand the influence of formaldehyde/urea (F/U) mole ratio on the properties of urea–formaldehyde (UF) resins, this study investigated hardness of cured UF resins with different F/U mole ratios using a nanoindentation method. The traditional Brinell hardness (HB) method was also used...

A simulation-based study on the influence of beam hardening in X-ray computed tomography for dimensional metrology.

PubMed

Lifton, Joseph J; Malcolm, Andrew A; McBride, John W

2015-01-01

X-ray computed tomography (CT) is a radiographic scanning technique for visualising cross-sectional images of an object non-destructively. From these cross-sectional images it is possible to evaluate internal dimensional features of a workpiece which may otherwise be inaccessible to tactile and optical instruments. Beam hardening is a physical process that degrades the quality of CT images and has previously been suggested to influence dimensional measurements. Using a validated simulation tool, the influence of spectrum pre-filtration and beam hardening correction are evaluated for internal and external dimensional measurements. Beam hardening is shown to influence internal and external dimensions in opposition, and to have a greater influence on outer dimensions compared to inner dimensions. The results suggest the combination of spectrum pre-filtration and a local gradient-based surface determination method are able to greatly reduce the influence of beam hardening in X-ray CT for dimensional metrology.

Small-Scale System for Evaluation of Stretch-Flangeability with Excellent Reliability

NASA Astrophysics Data System (ADS)

Yoon, Jae Ik; Jung, Jaimyun; Lee, Hak Hyeon; Kim, Hyoung Seop

2018-02-01

We propose a system for evaluating the stretch-flangeability of small-scale specimens based on the hole-expansion ratio (HER). The system has no size effect and shows excellent reproducibility, reliability, and economic efficiency. To verify the reliability and reproducibility of the proposed hole-expansion testing (HET) method, the deformation behavior of the conventional standard stretch-flangeability evaluation method was compared with the proposed method using finite-element method simulations. The distribution of shearing defects in the hole-edge region of the specimen, which has a significant influence on the HER, was investigated using scanning electron microscopy. The stretch-flangeability of several kinds of advanced high-strength steel determined using the conventional standard method was compared with that using the proposed small-scale HET method. It was verified that the deformation behavior, morphology and distribution of shearing defects, and stretch-flangeability results for the specimens were the same for the conventional standard method and the proposed small-scale stretch-flangeability evaluation system.

Small-Scale System for Evaluation of Stretch-Flangeability with Excellent Reliability

NASA Astrophysics Data System (ADS)

Yoon, Jae Ik; Jung, Jaimyun; Lee, Hak Hyeon; Kim, Hyoung Seop

2018-06-01

We propose a system for evaluating the stretch-flangeability of small-scale specimens based on the hole-expansion ratio (HER). The system has no size effect and shows excellent reproducibility, reliability, and economic efficiency. To verify the reliability and reproducibility of the proposed hole-expansion testing (HET) method, the deformation behavior of the conventional standard stretch-flangeability evaluation method was compared with the proposed method using finite-element method simulations. The distribution of shearing defects in the hole-edge region of the specimen, which has a significant influence on the HER, was investigated using scanning electron microscopy. The stretch-flangeability of several kinds of advanced high-strength steel determined using the conventional standard method was compared with that using the proposed small-scale HET method. It was verified that the deformation behavior, morphology and distribution of shearing defects, and stretch-flangeability results for the specimens were the same for the conventional standard method and the proposed small-scale stretch-flangeability evaluation system.

De retibus socialibus et legibus momenti

NASA Astrophysics Data System (ADS)

Gayo-Avello, D.; Brenes, D. J.; Fernández-Fernández, D.; Fernández-Menéndez, M. E.; García-Suárez, R.

2011-05-01

Online Social Networks (OSNs) are a cutting edge topic. Almost everybody —users, marketers, brands, companies, and researchers— is approaching OSNs to better understand them and take advantage of their benefits. Maybe one of the key concepts underlying OSNs is that of influence which is highly related, although not entirely identical, to those of popularity and centrality. Influence is, according to Merriam-Webster, "the capacity of causing an effect in indirect or intangible ways". Hence, in the context of OSNs, it has been proposed to analyze the clicks received by promoted URLs in order to check for any positive correlation between the number of visits and different "influence" scores. That evaluation methodology is used in this letter to compare a number of those techniques with a new method firstly described here. That new method is a simple and rather elegant solution which tackles with influence in OSNs by applying a physical metaphor. On social networks and the laws of influence.

Performance evaluation of a health insurance in Nigeria using optimal resource use: health care providers perspectives

PubMed Central

2014-01-01

Background Performance measures are often neglected during the transition period of national health insurance scheme implementation in many low and middle income countries. These measurements evaluate the extent to which various aspects of the schemes meet their key objectives. This study assesses the implementation of a health insurance scheme using optimal resource use domains and examines possible factors that influence each domain, according to providers’ perspectives. Methods A retrospective, cross-sectional survey was done between August and December 2010 in Kaduna state, and 466 health care provider personnel were interviewed. Optimal-resource-use was defined in four domains: provider payment mechanism (capitation and fee-for-service payment methods), benefit package, administrative efficiency, and active monitoring mechanism. Logistic regression analysis was used to identify provider factors that may influence each domain. Results In the provider payment mechanism domain, capitation payment method (95%) performed better than fee-for-service payment method (62%). Benefit package domain performed strongly (97%), while active monitoring mechanism performed weakly (37%). In the administrative efficiency domain, both promptness of referral system (80%) and prompt arrival of funds (93%) performed well. At the individual level, providers with fewer enrolees encountered difficulties with reimbursement. Other factors significantly influenced each of the optimal-resource-use domains. Conclusions Fee-for-service payment method and claims review, in the provider payment and active monitoring mechanisms, respectively, performed weakly according to the providers’ (at individual-level) perspectives. A short-fall on the supply-side of health insurance could lead to a direct or indirect adverse effect on the demand-side of the scheme. Capitation payment per enrolees should be revised to conform to economic circumstances. Performance indicators and providers’ characteristics and experiences associated with resource use can assist policy makers to monitor and evaluate health insurance implementation. PMID:24628889

The proboscis extension reflex to evaluate learning and memory in honeybees ( Apis mellifera): some caveats

NASA Astrophysics Data System (ADS)

Frost, Elisabeth H.; Shutler, Dave; Hillier, Neil Kirk

2012-09-01

The proboscis extension reflex (PER) is widely used in a classical conditioning (Pavlovian) context to evaluate learning and memory of a variety of insect species. The literature is particularly prodigious for honeybees ( Apis mellifera) with more than a thousand publications. Imagination appears to be the only limit to the types of challenges to which researchers subject honeybees, including all the sensory modalities and a broad diversity of environmental treatments. Accordingly, some remarkable insights have been achieved using PER. However, there are several challenges to evaluating the PER literature that warrant a careful and thorough review. We assess here variation in methods that makes interpretation of studies, even those researching the same question, tenuous. We suggest that the numerous variables that might influence experimental outcomes from PER be thoroughly detailed by researchers. Moreover, the influence of individual variables on results needs to carefully evaluated, as well as among two or more variables. Our intent is to encourage investigation of the influence of numerous variables on PER results.

Supervised chaos genetic algorithm based state of charge determination for LiFePO4 batteries in electric vehicles

NASA Astrophysics Data System (ADS)

Shen, Yanqing

2018-04-01

LiFePO4 battery is developed rapidly in electric vehicle, whose safety and functional capabilities are influenced greatly by the evaluation of available cell capacity. Added with adaptive switch mechanism, this paper advances a supervised chaos genetic algorithm based state of charge determination method, where a combined state space model is employed to simulate battery dynamics. The method is validated by the experiment data collected from battery test system. Results indicate that the supervised chaos genetic algorithm based state of charge determination method shows great performance with less computation complexity and is little influenced by the unknown initial cell state.

COMPARISON OF SAMPLING METHODS FOR SEMI-VOLATILE ORGANIC CARBON (SVOC) ASSOCIATED WITH PM 2.5

EPA Science Inventory

This study evaluates the influence of denuder sampling methods and filter collection media on the measurement of semi-volatile organic carbon (SVOC) associated with PM2.5. Two types of collection media, charcoal (activated carbon) and XAD, were used both in diffusion denuders ...

COMPARISON OF SAMPLING METHODS FOR SEMI-VOLATILE ORGANIC CARBON ASSOCIATED WITH PM 2.5

EPA Science Inventory

This study evaluates the influence of denuder sampling methods and filter collection media on the measurement of semi-volatile organic carbon (SVOC) associated with PM2.5. Two types of collection media, charcoal (activated carbon) and XAD, were used both in diffusion denuders ...

Parametric study on single shot peening by dimensional analysis method incorporated with finite element method

NASA Astrophysics Data System (ADS)

Wu, Xian-Qian; Wang, Xi; Wei, Yan-Peng; Song, Hong-Wei; Huang, Chen-Guang

2012-06-01

Shot peening is a widely used surface treatment method by generating compressive residual stress near the surface of metallic materials to increase fatigue life and resistance to corrosion fatigue, cracking, etc. Compressive residual stress and dent profile are important factors to evaluate the effectiveness of shot peening process. In this paper, the influence of dimensionless parameters on maximum compressive residual stress and maximum depth of the dent were investigated. Firstly, dimensionless relations of processing parameters that affect the maximum compressive residual stress and the maximum depth of the dent were deduced by dimensional analysis method. Secondly, the influence of each dimensionless parameter on dimensionless variables was investigated by the finite element method. Furthermore, related empirical formulas were given for each dimensionless parameter based on the simulation results. Finally, comparison was made and good agreement was found between the simulation results and the empirical formula, which shows that a useful approach is provided in this paper for analyzing the influence of each individual parameter.

Couplings

NASA Astrophysics Data System (ADS)

Stošić, Dušan; Auroux, Aline

Basic principles of calorimetry coupled with other techniques are introduced. These methods are used in heterogeneous catalysis for characterization of acidic, basic and red-ox properties of solid catalysts. Estimation of these features is achieved by monitoring the interaction of various probe molecules with the surface of such materials. Overview of gas phase, as well as liquid phase techniques is given. Special attention is devoted to coupled calorimetry-volumetry method. Furthermore, the influence of different experimental parameters on the results of these techniques is discussed, since it is known that they can significantly influence the evaluation of catalytic properties of investigated materials.

Photomask quality evaluation using lithography simulation and precision SEM image contour data

NASA Astrophysics Data System (ADS)

Murakawa, Tsutomu; Fukuda, Naoki; Shida, Soichi; Iwai, Toshimichi; Matsumoto, Jun; Nakamura, Takayuki; Hagiwara, Kazuyuki; Matsushita, Shohei; Hara, Daisuke; Adamov, Anthony

2012-11-01

To evaluate photomask quality, the current method uses spatial imaging by optical inspection tools. This technique at 1Xnm node has a resolution limit because small defects will be difficult to extract. To simulate the mask error-enhancement factor (MEEF) influence for aggressive OPC in 1Xnm node, wide FOV contour data and tone information are derived from high precision SEM images. For this purpose we have developed a new contour data extraction algorithm with sub-nanometer accuracy resulting in a wide Field of View (FOV) SEM image: (for example, more than 10um x 10um square). We evaluated MEEF influence of high-end photomask pattern using the wide FOV contour data of "E3630 MVM-SEMTM" and lithography simulator "TrueMaskTM DS" of D2S, Inc. As a result, we can detect the "invisible defect" as the MEEF influence using the wide FOV contour data and lithography simulator.

Distress, anxiety, and depression in cancer patients undergoing chemotherapy

PubMed Central

Pandey, Manoj; Sarita, Gangadharan P; Devi, Nandkumar; Thomas, Bejoy C; Hussain, Badridien M; Krishnan, Rita

2006-01-01

Background Chemotherapy for cancer is an intense and cyclic treatment associated with number of side-effects. The present study evaluated the effect of chemotherapy on distress, anxiety and depression. Patients and methods A total of 117 patients were evaluated by using distress inventory for cancer (DIC2) and hospital anxiety and depression scale (HADS). Majority of the patients were taking chemotherapy for solid tumors (52; 44.4%). Results The mean distress score was 24, 18 (15.38%) were found to have anxiety while 19 (16.23%) had depression. High social status was the only factor found to influence distress while female gender was the only factor found to influence depression in the present study. Conclusion The study highlights high psychological morbidity of cancer patients and influence of gender on depression. Construct of distress as evaluated by DIC 2 may have a possible overlap with anxiety. PMID:17002797

The Evaluation of a Risk Degree for the Process of a Brown Coal Spontaneous Ignition on Dumps with Using of Modern Numeric Methods

NASA Astrophysics Data System (ADS)

Klouda, Petr; Moni, Vlastimil; Řehoř, Michal; Blata, Jan; Helebrant, František

2018-06-01

The article is a summary of information about evaluation of a risk degree for a brown coal spontaneous ignition which is realized on the base of a database analysis of information about the development of stative quantities and desorbated gases in the stored bodies of the brown coal. The data were gained from the long term complex measurements which were realized at chosen companies during the coal mining in the previous parts of the project. In the last part of the project, we examined results of temperature models from thermographs with results of gasses and coal samples from the mines. Then, the influence of atmospheric conditions (insolation, water downfall, changes of barometric pressure etc.), the influence of coal mass degradation, the influence of physical and chemical factors, and the influence of other defective factors on the process of the coal spontaneous ignition. The gasmetry was assess with gas in-situ samples and laboratory gas models of indicative gasses for the spontaneous ignition, which were taken from the method of the thermic oxidation with the aim of the correlation finding for an epicentre of temperature within the spontaneous ignition.

Application of a low order panel method to complex three-dimensional internal flow problems

NASA Technical Reports Server (NTRS)

Ashby, D. L.; Sandlin, D. R.

1986-01-01

An evaluation of the ability of a low order panel method to predict complex three-dimensional internal flow fields was made. The computer code VSAERO was used as a basis for the evaluation. Guidelines for modeling internal flow geometries were determined and the effects of varying the boundary conditions and the use of numerical approximations on the solutions accuracy were studied. Several test cases were run and the results were compared with theoretical or experimental results. Modeling an internal flow geometry as a closed box with normal velocities specified on an inlet and exit face provided accurate results and gave the user control over the boundary conditions. The values of the boundary conditions greatly influenced the amount of leakage an internal flow geometry suffered and could be adjusted to eliminate leakage. The use of the far-field approximation to reduce computation time influenced the accuracy of a solution and was coupled with the values of the boundary conditions needed to eliminate leakage. The error induced in the influence coefficients by using the far-field approximation was found to be dependent on the type of influence coefficient, the far-field radius, and the aspect ratio of the panels.

When Outcome Definition Determines the Result in Impact Evaluations: An Illustration Using the Swedish Work-Practice Programme

ERIC Educational Resources Information Center

Månsson, Jonas; Lundin, Christofer

2017-01-01

In this paper we investigate the effect of difference in outcome definitions on the result of impact evaluations. The Swedish workplace practice programme is evaluated, using matching methods. The key findings are that changing how the outcome is defined has a considerable influence on the results of the impact assessment. From the results of this…

Evaluating different planting stocks for oak regeneration on Hurricane Katrina disturbed lands

Treesearch

Damon B. Hollis; Andrew W. Ezell; Emily B. Schultz; John D. Hodges; Andrew B. Self; Derek K. Alkire

2012-01-01

Three oak planting stocks were evaluated to determine their influence on survival and initial growth. Planting stocks utilized included conventional containerized seedlings in 240 centimeter3 (cm3) containers, 1-0, bareroot seedlings, and Root Production Method (RPM™) seedlings in 11.4 liter (L) containers. Initial height, groundline diameter (...

Knowledge to Action: Scholarship for Faculty and Staff

ERIC Educational Resources Information Center

Ratnapalan, Savithiri

2009-01-01

Introduction: This study was undertaken to evaluate the influence of a continuing education course in facilitating the development and implementation of educational projects of course participants. Methods: This is a case study evaluating a full-year course that consisted of 11 monthly seminars, each 4 hours in length, including practice in a…

Livestock Judges Training Provides Hands-On Experience

ERIC Educational Resources Information Center

Nash, Scott; Harrison, Steve; Packham, Joel; Sanchez, Dawn; Jensen, Jim; Kaysen, Brett; King, Marc

2016-01-01

The judging of a market animal at a fair is the highlight of a youth-owned livestock project. Livestock judges are hired to evaluate youth projects at fairs. They are critical ambassadors for agriculture and influence countless youths and adults. Judges must be knowledgeable about current animal evaluation methods that support youth development.…

An aerodynamic analysis of the autogiro rotor with a comparison between calculated and experimental results

NASA Technical Reports Server (NTRS)

Wheatley, John B

1935-01-01

This report presents an extension of the autogiro theory of Glauert and Lock in which the influence of a pitch varying with the blade radius is evaluated and methods of approximating the effect of blade tip losses and the influence of reversed velocities on the retreating blades are developed. A comparison of calculated and experimental results showed that most of the rotor characteristics could be calculated with reasonable accuracy, and that the type of induced flow assumed has a secondary effect upon the net rotor forces, although the flapping motion is influenced appreciably. An approximate evaluation of the effect of parasite drag on the rotor blades established the importance of including this factor in the analysis.

Detection of wood failure by image processing method: influence of algorithm, adhesive and wood species

Treesearch

Lanying Lin; Sheng He; Feng Fu; Xiping Wang

2015-01-01

Wood failure percentage (WFP) is an important index for evaluating the bond strength of plywood. Currently, the method used for detecting WFP is visual inspection, which lacks efficiency. In order to improve it, image processing methods are applied to wood failure detection. The present study used thresholding and K-means clustering algorithms in wood failure detection...

Influence of the impact assessment method on the conclusions of a LCA study. Application to the case of a part made with virgin and recycled HDPE.

PubMed

Simões, Carla L; Xará, Susana M; Bernardo, C A

2011-10-01

Recent legislation has stressed the need to decide the best end-of-life (EoL) option for post-consumer products considering their full life-cycle and the corresponding overall environmental impacts. The life cycle assessment (LCA) technique has become a common tool to evaluate those impacts. The present study aimed to contribute to the better understanding of the application of this technique, by evaluating the influence of the selection of the life cycle impact assessment (LCIA) method in its results and conclusions. A specific case study was chosen, using previous information related to an anti-glare lamellae (AGL) for highway use, made with virgin and recycled high-density polyethylene (HDPE). Five distinct LCIA methods were used: Eco-indicator 99, CML 2 (2000), EPS 2000, Eco-indicator 95 and EDIP 97. Consistent results between these methods were obtained for the Climate change, Ozone layer depletion, Acidification and Eutrophication environmental indicators. Conversely, the Summer smog indicator showed large discrepancies between impact assessment methods. The work sheds light on the advantages inherent in using various LCIA methods when doing the LCA study of a specific product, thus evidencing complementary analysis perspectives.

[Study on depressive disorder and related factors in surgical inpatients].

PubMed

Ge, Hong-min; Liu, Lan-fen; Han, Jian-bo

2008-03-01

To investigate the prevalence and possible influencing factors of depressive disorder in surgical inpatients. Two hundred and sixty-six surgical inpatients meeting the inclusion criteria were first screened with the self rating depression scale (SDS), and then the subjects screened positive and 20% of those screened negative were evaluated with Structured Clinical Interview for DSM-IV Axis I Disorders (SCID) as a gold standard for diagnosis of depressive disorder. Possible influencing factors were also analyzed by experienced psychiatrists. The standard score of SDS in the surgical inpatients were significantly higher than those in the Chinese norm, and the incidence of depressive disorder in the surgical inpatients was 37.2%. Unvaried analysis showed that depressive disorder were associated with gender, education, economic condition, variety of diseases, hospitalization duration, and treatment methods. Logistic regression analysis revealed that gender, economic condition, treatment methods and previous history were the main influencing factors. The incidence of depressive disorder in the surgical inpatients is high, and it is mainly influenced by gender, economic condition, treatment methods and previous history.

Invited commentary: Evaluating epidemiologic research methods--the importance of response rate calculation.

PubMed

Harris, M Anne

2010-09-15

Epidemiologic research that uses administrative records (rather than registries or clinical surveys) to identify cases for study has been increasingly restricted because of concerns about privacy, making unbiased population-based research less practicable. In their article, Nattinger et al. (Am J Epidemiol. 2010;172(6):637-644) present a method for using administrative data to contact participants that has been well received. However, the methods employed for calculating and reporting response rates require further consideration, particularly the classification of untraceable cases as ineligible. Depending on whether response rates are used to evaluate the potential for bias to influence study results or to evaluate the acceptability of the method of contact, different fractions may be considered. To improve the future study of epidemiologic research methods, a consensus on the calculation and reporting of study response rates should be sought.

Characterizing lentic freshwater fish assemblages using multiple sampling methods

USGS Publications Warehouse

Fischer, Jesse R.; Quist, Michael C.

2014-01-01

Characterizing fish assemblages in lentic ecosystems is difficult, and multiple sampling methods are almost always necessary to gain reliable estimates of indices such as species richness. However, most research focused on lentic fish sampling methodology has targeted recreationally important species, and little to no information is available regarding the influence of multiple methods and timing (i.e., temporal variation) on characterizing entire fish assemblages. Therefore, six lakes and impoundments (48–1,557 ha surface area) were sampled seasonally with seven gear types to evaluate the combined influence of sampling methods and timing on the number of species and individuals sampled. Probabilities of detection for species indicated strong selectivities and seasonal trends that provide guidance on optimal seasons to use gears when targeting multiple species. The evaluation of species richness and number of individuals sampled using multiple gear combinations demonstrated that appreciable benefits over relatively few gears (e.g., to four) used in optimal seasons were not present. Specifically, over 90 % of the species encountered with all gear types and season combinations (N = 19) from six lakes and reservoirs were sampled with nighttime boat electrofishing in the fall and benthic trawling, modified-fyke, and mini-fyke netting during the summer. Our results indicated that the characterization of lentic fish assemblages was highly influenced by the selection of sampling gears and seasons, but did not appear to be influenced by waterbody type (i.e., natural lake, impoundment). The standardization of data collected with multiple methods and seasons to account for bias is imperative to monitoring of lentic ecosystems and will provide researchers with increased reliability in their interpretations and decisions made using information on lentic fish assemblages.

Evaluation of Beeswax Influence on Physical Properties of Lipstick Using Instrumental and Sensory Methods.

PubMed

Kasparaviciene, Giedre; Savickas, Arunas; Kalveniene, Zenona; Velziene, Saule; Kubiliene, Loreta; Bernatoniene, Jurga

2016-01-01

The aim of this study was to optimize the lipsticks formulation according to the physical properties and sensory attributes and investigate the relationship between instrumental and sensory analyses and evaluate the influence of the main ingredients, beeswax and oil, with analysis of lipsticks properties. Central composite design was used to optimize the mixture of oils and beeswax and cocoa butter for formulation of lipsticks. Antioxidant activity was evaluated by DPPH free radical scavenging method spectrophotometrically. Physical properties of lipsticks melting point were determined in a glass tube; the hardness was investigated with texture analyzer. Sensory analysis was performed with untrained volunteers. The optimized mixture of sea buckthorn oil and grapeseed oil mixture ratio 13.96 : 6.18 showed the highest antioxidative activity (70 ± 0.84%) and was chosen for lipstick formulation. According to the sensory and instrumental analysis results, optimal ingredients amounts for the lipstick were calculated: 57.67% mixture of oils, 19.58% beeswax, and 22.75% cocoa butter. Experimentally designed and optimized lipstick formulation had good physical properties and high scored sensory evaluation. Correlation analysis showed a significant relationship between sensory and instrumental evaluations.

Evaluation of Beeswax Influence on Physical Properties of Lipstick Using Instrumental and Sensory Methods

PubMed Central

Kasparaviciene, Giedre; Savickas, Arunas; Kalveniene, Zenona; Velziene, Saule; Kubiliene, Loreta

2016-01-01

The aim of this study was to optimize the lipsticks formulation according to the physical properties and sensory attributes and investigate the relationship between instrumental and sensory analyses and evaluate the influence of the main ingredients, beeswax and oil, with analysis of lipsticks properties. Central composite design was used to optimize the mixture of oils and beeswax and cocoa butter for formulation of lipsticks. Antioxidant activity was evaluated by DPPH free radical scavenging method spectrophotometrically. Physical properties of lipsticks melting point were determined in a glass tube; the hardness was investigated with texture analyzer. Sensory analysis was performed with untrained volunteers. The optimized mixture of sea buckthorn oil and grapeseed oil mixture ratio 13.96 : 6.18 showed the highest antioxidative activity (70 ± 0.84%) and was chosen for lipstick formulation. According to the sensory and instrumental analysis results, optimal ingredients amounts for the lipstick were calculated: 57.67% mixture of oils, 19.58% beeswax, and 22.75% cocoa butter. Experimentally designed and optimized lipstick formulation had good physical properties and high scored sensory evaluation. Correlation analysis showed a significant relationship between sensory and instrumental evaluations. PMID:27994631

Overcoming Structural Constraints to Patient Utilization of Electronic Medical Records: A Critical Review and Proposal for an Evaluation Framework

PubMed Central

Winkelman, Warren J.; Leonard, Kevin J.

2004-01-01

There are constraints embedded in medical record structure that limit use by patients in self-directed disease management. Through systematic review of the literature from a critical perspective, four characteristics that either enhance or mitigate the influence of medical record structure on patient utilization of an electronic patient record (EPR) system have been identified: environmental pressures, physician centeredness, collaborative organizational culture, and patient centeredness. An evaluation framework is proposed for use when considering adaptation of existing EPR systems for online patient access. Exemplars of patient-accessible EPR systems from the literature are evaluated utilizing the framework. From this study, it appears that traditional information system research and development methods may not wholly capture many pertinent social issues that arise when expanding access of EPR systems to patients. Critically rooted methods such as action research can directly inform development strategies so that these systems may positively influence health outcomes. PMID:14633932

Local influence for generalized linear models with missing covariates.

PubMed

Shi, Xiaoyan; Zhu, Hongtu; Ibrahim, Joseph G

2009-12-01

In the analysis of missing data, sensitivity analyses are commonly used to check the sensitivity of the parameters of interest with respect to the missing data mechanism and other distributional and modeling assumptions. In this article, we formally develop a general local influence method to carry out sensitivity analyses of minor perturbations to generalized linear models in the presence of missing covariate data. We examine two types of perturbation schemes (the single-case and global perturbation schemes) for perturbing various assumptions in this setting. We show that the metric tensor of a perturbation manifold provides useful information for selecting an appropriate perturbation. We also develop several local influence measures to identify influential points and test model misspecification. Simulation studies are conducted to evaluate our methods, and real datasets are analyzed to illustrate the use of our local influence measures.

Research on uncertainty evaluation measure and method of voltage sag severity

NASA Astrophysics Data System (ADS)

Liu, X. N.; Wei, J.; Ye, S. Y.; Chen, B.; Long, C.

2018-01-01

Voltage sag is an inevitable serious problem of power quality in power system. This paper focuses on a general summarization and reviews on the concepts, indices and evaluation methods about voltage sag severity. Considering the complexity and uncertainty of influencing factors, damage degree, the characteristics and requirements of voltage sag severity in the power source-network-load sides, the measure concepts and their existing conditions, evaluation indices and methods of voltage sag severity have been analyzed. Current evaluation techniques, such as stochastic theory, fuzzy logic, as well as their fusion, are reviewed in detail. An index system about voltage sag severity is provided for comprehensive study. The main aim of this paper is to propose thought and method of severity research based on advanced uncertainty theory and uncertainty measure. This study may be considered as a valuable guide for researchers who are interested in the domain of voltage sag severity.

A Tool for the Automated Design and Evaluation of Habitat Interior Layouts

NASA Technical Reports Server (NTRS)

Simon, Matthew A.; Wilhite, Alan W.

2013-01-01

The objective of space habitat design is to minimize mass and system size while providing adequate space for all necessary equipment and a functional layout that supports crew health and productivity. Unfortunately, development and evaluation of interior layouts is often ignored during conceptual design because of the subjectivity and long times required using current evaluation methods (e.g., human-in-the-loop mockup tests and in-depth CAD evaluations). Early, more objective assessment could prevent expensive design changes that may increase vehicle mass and compromise functionality. This paper describes a new interior design evaluation method to enable early, structured consideration of habitat interior layouts. This interior layout evaluation method features a comprehensive list of quantifiable habitat layout evaluation criteria, automatic methods to measure these criteria from a geometry model, and application of systems engineering tools and numerical methods to construct a multi-objective value function measuring the overall habitat layout performance. In addition to a detailed description of this method, a C++/OpenGL software tool which has been developed to implement this method is also discussed. This tool leverages geometry modeling coupled with collision detection techniques to identify favorable layouts subject to multiple constraints and objectives (e.g., minimize mass, maximize contiguous habitable volume, maximize task performance, and minimize crew safety risks). Finally, a few habitat layout evaluation examples are described to demonstrate the effectiveness of this method and tool to influence habitat design.

The influence of film-screen color sensitivity and type of measurement device on kVp measurements.

PubMed

Lam, R W; Price, S C

1989-01-01

Three methods for evaluating radiographic kVp were studied: the Wisconsin Test Cassette, the Noninvasive Evaluator of Radiation Outputs (NERO), and the Dynalyzer. The Dynalyzer kVp readings were the highest and were followed by NERO and cassette readings in descending order. By film type, the cassette readings ranged from Kodak OG (green sensitive), TMG (green sensitive), XK (blue sensitive), and XRP (blue sensitive) in descending order. The results show that there is significant variation between the methods.

Impact of an Online Medical Internet Site on Knowledge and Practice of Health Care Providers: A Mixed Methods Study of the Spinal Cord Injury Rehabilitation Evidence Project

PubMed Central

Noonan, Vanessa K; Townson, Andrea F; Higgins, Caroline E; Rogers, Jess; Wolfe, Dalton L

2014-01-01

Background It is not known whether ongoing access to a broad-based Internet knowledge resource can influence the practice of health care providers. We undertook a study to evaluate the impact of a Web-based knowledge resource on increasing access to evidence and facilitating best practice of health care providers. Objective The objective of this study was to evaluate (1) the impact of the Spinal Cord Injury Rehabilitation Evidence (SCIRE) project on access to information for health care providers and researchers and (2) how SCIRE influenced health care providers' management of clients. Methods A 4-part mixed methods evaluation was undertaken: (1) monitoring website traffic and utilization using Google Analytics, (2) online survey of users who accessed the SCIRE website, (3) online survey of targeted end-users, that is, rehabilitation health care providers known to work with spinal cord injury (SCI) clients, as well as researchers, and (4) focus groups with health care providers who had previously accessed SCIRE. Results The online format allowed the content for a relatively specialized field to have far reach (eg, 26 countries and over 6500 users per month). The website survey and targeted end-user survey confirmed that health care providers, as well as researchers perceived that the website increased their access to SCI evidence. Access to SCIRE not only improved knowledge of SCI evidence but helped inform changes to the health providers’ clinical practice and improved their confidence in treating SCI clients. The SCIRE information directly influenced the health providers’ clinical decision making, in terms of choice of intervention, equipment needs, or assessment tool. Conclusions A Web-based knowledge resource may be a relatively inexpensive method to increase access to evidence-based information, increase knowledge of the evidence, inform changes to the health providers’ practice, and influence their clinical decision making. PMID:25537167

Solvent influence upon structure & throughput of poly vinyledene fluoride thin film nano-patterns by imprint lithography

NASA Astrophysics Data System (ADS)

Sankar, M. S. Ravi; Gangineni, R. B.

2018-04-01

This work aims at understanding the solvent influence upon the throughput and structure of poly vinyledene fluoride (PVDF)nano-patterned films. The PVDF thin films are deposited by spin coating method using Dimethylsulfoxide (DMSO), Tetrahydrofuran (THF) and 2-butanone solvents. The nano-patterns are realized by imprinting SONY 700 MB CD aluminum constructions on PVDF thin filmsusing imprint lithography technique under ambient annealing temperature and pressure. Surface morphology &imprint pattern transfer quality is evaluated with Atomic force microscopy (AFM). Raman spectroscopy is used for evaluating the structural evolutions with respect to solvent & patterning.

Influence Map Methodology for Evaluating Systemic Safety Issues

NASA Technical Reports Server (NTRS)

2008-01-01

"Raising the bar" in safety performance is a critical challenge for many organizations, including Kennedy Space Center. Contributing-factor taxonomies organize information about the reasons accidents occur and therefore are essential elements of accident investigations and safety reporting systems. Organizations must balance efforts to identify causes of specific accidents with efforts to evaluate systemic safety issues in order to become more proactive about improving safety. This project successfully addressed the following two problems: (1) methods and metrics to support the design of effective taxonomies are limited and (2) influence relationships among contributing factors are not explicitly modeled within a taxonomy.

Regional Risk Evaluation of Flood Disasters for the Trunk-Highway in Shaanxi, China

PubMed Central

Qi, Hong-Liang; Tian, Wei-Ping; Li, Jia-Chun

2015-01-01

Due to the complicated environment there are various types of highway disasters in Shaanxi Province (China). The damages caused are severe, losses are heavy, and have rapidly increased over the years, especially those caused by flood disasters along the rivers in mountainous areas. Therefore, research on risk evaluations, which play important roles in the prevention and mitigation of highway disasters are very important. An evaluation model was established based on the superposition theory of regional influencing factors to highway flood disasters. Based on the formation mechanism and influencing factors of highway flood disasters, the main influencing factors were selected. These factors include rainstorms, terrain slopes, soil types, vegetation coverage and regional river density, which are based on evaluation indexes from climate conditions and underlying surface of the basin. A regional risk evaluation of highway flood disasters in Shaanxi was established using GIS. The risk index was divided into five levels using statistical methods, in accordance with the regional characteristics of highway flood disasters. Considering the difference in upfront investments, road grade, etc, between expressways and trunk-highways in China, a regional risk evaluation of trunk-highway flood disasters was completed. The evaluation results indicate that the risk evaluation is consistent with the actual situation. PMID:26528994

Regional Risk Evaluation of Flood Disasters for the Trunk-Highway in Shaanxi, China.

PubMed

Qi, Hong-Liang; Tian, Wei-Ping; Li, Jia-Chun

2015-10-29

Due to the complicated environment there are various types of highway disasters in Shaanxi Province (China). The damages caused are severe, losses are heavy, and have rapidly increased over the years, especially those caused by flood disasters along the rivers in mountainous areas. Therefore, research on risk evaluations, which play important roles in the prevention and mitigation of highway disasters are very important. An evaluation model was established based on the superposition theory of regional influencing factors to highway flood disasters. Based on the formation mechanism and influencing factors of highway flood disasters, the main influencing factors were selected. These factors include rainstorms, terrain slopes, soil types, vegetation coverage and regional river density, which are based on evaluation indexes from climate conditions and underlying surface of the basin. A regional risk evaluation of highway flood disasters in Shaanxi was established using GIS. The risk index was divided into five levels using statistical methods, in accordance with the regional characteristics of highway flood disasters. Considering the difference in upfront investments, road grade, etc, between expressways and trunk-highways in China, a regional risk evaluation of trunk-highway flood disasters was completed. The evaluation results indicate that the risk evaluation is consistent with the actual situation.

An Evaluation of Health Impact Assessments in the United States, 2011–2014

PubMed Central

Charbonneau, Diana; Cahill, Carol; Dannenberg, Andrew L.

2015-01-01

Introduction The Center for Community Health and Evaluation conducted a 3-year evaluation to assess results of health impact assessments (HIAs) in the United States and to identify elements critical for their success. Methods The study used a retrospective, mixed-methods comparative case study design, including a literature review; site visits; interviews with investigators, stakeholders, and decision makers for 23 HIAs in 16 states that were completed from 2005 through 2013; and a Web-based survey of 144 HIA practitioners. Results Analysis of interviews with decision makers suggests HIAs can directly influence decisions in nonhealth-related sectors. HIAs may also influence changes beyond the decision target, build consensus and relationships among decision makers and their constituents, and give community members a stronger voice in decisions that affect them. Factors that may increase HIA success include care in choosing a project or policy to be examined’ selecting an appropriate team to conduct the HIA; engaging stakeholders and decision makers throughout the process; crafting clear, actionable recommendations; delivering timely, compelling messages to appropriate audiences; and using multiple dissemination methods. Challenges to successful HIAs include underestimating the level of effort required, political changes during the conduct of the HIA, accessing relevant local data, engaging vulnerable populations, and following up on recommendations. Conclusion Results of this study suggest HIAs are a useful tool to promote public health because they can influence decisions in nonhealth-related sectors, strengthen cross-sector collaborations, and raise awareness of health issues among decision makers. PMID:25695261

Three Interaction Patterns on Asynchronous Online Discussion Behaviours: A Methodological Comparison

ERIC Educational Resources Information Center

Jo, I.; Park, Y.; Lee, H.

2017-01-01

An asynchronous online discussion (AOD) is one format of instructional methods that facilitate student-centered learning. In the wealth of AOD research, this study evaluated how students' behavior on AOD influences their academic outcomes. This case study compared the differential analytic methods including web log mining, social network analysis…

Partnering with the Local Livestock Market in Educational Programs.

ERIC Educational Resources Information Center

Jenkins, Jamie H.; Newman, Michael E.; Castellaw, Jimmy C.; Lane, Clyde D., Jr.

2000-01-01

Survey responses from 62 of 96 cattle producers evaluated educational methods of the extension service and the livestock market. Methods included tips distributed with the sale check, monthly and sale day programs, and Second Saturday cattle working program. The combination of programs offered influenced them to make changes in their production…

Irradiation influence on the detection of genetic-modified soybeans

NASA Astrophysics Data System (ADS)

Villavicencio, A. L. C. H.; Araújo, M. M.; Baldasso, J. G.; Aquino, S.; Konietzny, U.; Greiner, R.

2004-09-01

Three soybean varieties were analyzed to evaluate the irradiation influence on the detection of genetic modification. Samples were treated in a 60Co facility at dose levels of 0, 500, 800, and 1000Gy. The seeds were at first analyzed by Comet Assay as a rapid screening irradiation detection method. Secondly, germination test was performed to detect the viability of irradiated soybeans. Finally, because of its high sensitivity, its specificity and rapidity the polimerase chain reaction was the method applied for genetic modified organism detection. The analysis of DNA by the single technique of microgel electrophoresis of single cells (DNA Comet Assay) showed that DNA damage increased with increasing radiation doses. No negative influence of irradiation on the genetic modification detection was found.

Does the liquid method of electret forming influence the adhesion of blood platelets?

PubMed

Lowkis, B; Szymanowicz, M

1995-01-01

This work presents the results of the effect of the electric charge on the adhesion of blood platelets. All experiments were carried out on polyethylene foil. The liquid method was used to form electrets. The evaluation of the electret effect influence on the adhesion of blood platelets was made on the basis of the observation of the electret surface after the contact with fresh citrate human blood group O Rh+ in an electron scanning microscope. Experimental results confirmed the essential influence of the electric charge on the process of adhesion of blood platelets. It was noticed that the preliminary aging of electrets decreases the density of the surface charge and improves the athrombogenic characteristics of polyethylene foil.

Novel methods to assess the influence of diet and incubation time on the emissions of odors from beef and swine manures

USDA-ARS?s Scientific Manuscript database

The influence of diet type and time of incubation (fresh vs. overnight) on the emissions of odors from the feces of beef cattle and swine was evaluated by gas chromatography-mass spectral (GC-MS) analysis. Swine (n=12) and beef cattle (n=24) were fed with two and four separate diets, respectively (n...

Beliefs and Technology--Does One Lead to the Other? Evaluating the Effects of Teacher Self-Efficacy and School Collective Efficacy on Technology Use in the Classroom

ERIC Educational Resources Information Center

Studnicki, Elaine Ann

2012-01-01

This exploratory mixed method study builds upon previous research to investigate the influence of teacher self- and collective efficacy on technology use in the classroom. This population was purposefully sampled to examine first- and second order technology barriers, instructional strategies, and human influences on technology. The quantitative…

Influence of Manufacturing Methods of Implant-Supported Crowns on External and Internal Marginal Fit: A Micro-CT Analysis.

PubMed

Moris, Izabela C M; Monteiro, Silas Borges; Martins, Raíssa; Ribeiro, Ricardo Faria; Gomes, Erica A

2018-01-01

To evaluate the influence of different manufacturing methods of single implant-supported metallic crowns on the internal and external marginal fit through computed microtomography. Forty external hexagon implants were divided into 4 groups ( n = 8), according to the manufacturing method: GC, conventional casting; GI, induction casting; GP, plasma casting; and GCAD, CAD/CAM machining. The crowns were attached to the implants with insertion torque of 30 N·cm. The external (vertical and horizontal) marginal fit and internal fit were assessed through computed microtomography. Internal and external marginal fit data ( μ m) were submitted to a one-way ANOVA and Tukey's test ( α = .05). Qualitative evaluation of the images was conducted by using micro-CT. The statistical analysis revealed no significant difference between the groups for vertical misfit ( P = 0.721). There was no significant difference ( P > 0.05) for the internal and horizontal marginal misfit in the groups GC, GI, and GP, but it was found for the group GCAD ( P ≤ 0.05). Qualitative analysis revealed that most of the samples of cast groups exhibited crowns underextension while the group GCAD showed overextension. The manufacturing method of the crowns influenced the accuracy of marginal fit between the prosthesis and implant. The best results were found for the crowns fabricated through CAD/CAM machining.

Influence of shot peening on corrosion properties of biocompatible magnesium alloy AZ31 coated by dicalcium phosphate dihydrate (DCPD).

PubMed

Mhaede, Mansour; Pastorek, Filip; Hadzima, Branislav

2014-06-01

Magnesium alloys are promising materials for biomedical applications because of many outstanding properties like biodegradation, bioactivity and their specific density and Young's modulus are closer to bone than the commonly used metallic implant materials. Unfortunately their fatigue properties and low corrosion resistance negatively influenced their application possibilities in the field of biomedicine. These problems could be diminished through appropriate surface treatments. This study evaluates the influence of a surface pre-treatment by shot peening and shot peening+coating on the corrosion properties of magnesium alloy AZ31. The dicalcium phosphate dihydrate coating (DCPD) was electrochemically deposited in a solution containing 0.1M Ca(NO3)2, 0.06M NH4H2PO4 and 10mL/L of H2O2. The effect of shot peening on the surface properties of magnesium alloy was evaluated by microhardness and surface roughness measurements. The influence of the shot peening and dicalcium phosphate dihydrate layer on the electrochemical characteristics of AZ31 magnesium alloy was evaluated by potentiodynamic measurements and electrochemical impedance spectroscopy in 0.9% NaCl solution at a temperature of 22±1°C. The obtained results were analyzed by the Tafel-extrapolation method and equivalent circuit method. The results showed that the application of shot peening process followed by DCPD coating improves the properties of the AZ31 surface from corrosion and mechanical point of view. Copyright © 2014 Elsevier B.V. All rights reserved.

Evaluations of Structural Interventions for HIV Prevention: A Review of Approaches and Methods.

PubMed

Iskarpatyoti, Brittany S; Lebov, Jill; Hart, Lauren; Thomas, Jim; Mandal, Mahua

2018-04-01

Structural interventions alter the social, economic, legal, political, and built environments that underlie processes affecting population health. We conducted a systematic review of evaluations of structural interventions for HIV prevention in low- and middle-income countries (LMICs) to better understand methodological and other challenges and identify effective evaluation strategies. We included 27 peer-reviewed articles on interventions related to economic empowerment, education, and substance abuse in LMICs. Twenty-one evaluations included clearly articulated theories of change (TOCs); 14 of these assessed the TOC by measuring intermediary variables in the causal pathway between the intervention and HIV outcomes. Although structural interventions address complex interactions, no evaluation included methods designed to evaluate complex systems. To strengthen evaluations of structural interventions, we recommend clearly articulating a TOC and measuring intermediate variables between the predictor and outcome. We additionally recommend adapting study designs and analytic methods outside traditional epidemiology to better capture complex results, influences external to the intervention, and unintended consequences.

[Evaluation of accuracy and influence factors of bedside blood glucose monitoring in critically ill patients].

PubMed

Feng, Tao; Cao, Xiang-yuan

2012-08-01

To evaluate the accuracy and influence factors of point-of-care testing (POCT) for glucose in critically ill patients. Two hundred and forty critically ill patients aged ≥18 years in department of critical care medicine were enrolled. According to blood glucose level (BGL) during glucose control, patients were divided into three groups: (1) hypoglycemia group, BGL<4.5 mmol/L, n=32; (2) euglycemia group, BGL 4.5-8.3 mmol/L, n=138; (3) hyperglycemia group, BGL>8.3 mmol/L, n=70. The blood samples from vein, artery and capillary of patients were collected synchronically and the blood glucose of POCT were determined with glucose oxidase (GOD) and glucose dehydrogenase (GDH) methods, respectively, compared with blood glucose reference values of laboratory [hexokinase method (HK method)]. The accuracy of POCT for glucose and influence factors were analyzed statistically by the logistic regression method. (1) The inaccurate rates of glucose values in blood samples from vein, artery and capillary in hypoglycemia group (GDH method: 25.00%, 40.62%, 40.62%; GOD method: 59.38%, 71.88%, 71.88%) were significantly higher than those in euglycemia group (GDH method: 2.90%, 9.42%, 7.97%; GOD method: 18.12%, 27.54%, 27.54%) and hyperglycemia group (GDH method: 1.43%, 8.57%, 4.28%; GOD method: 11.43%, 8.57%, 11.43%, all P<0.01). (2) The average levels of difference for the glucose reference value of laboratory and the glucose value measured by glucometer in hypoglycemia group were 0.41-0.69 mmol/L (GDH method) and 0.92-1.18 mmol/L (GOD method), in euglycemia 0.16-0.33 mmol/L and 0.77-0.90 mmol/L, in hyperglycemia group -0.06-0.18 mmol/L and 0.56-0.76 mmol/L, respectively. (3) The correlation coefficients between the laboratory and glucometer in hypoglycemia group were respectively 0.812-0.853 (GDH method) and 0.723-0.816 (GOD method). The correlation coefficients in euglycemia group were 0.862-0.890 and 0.768-0.857. They were elevated to 0.922-0.957 and 0.896-0.922 in hyperglycemia group (all P<0.01). (4)On the influence factors of accuracy in POCT for glucose, BGL, acute physiology and chronic health evaluation II (APACHEII) score and hematocrit level were into the logistic regression equation. The accuracy of POCT for glucose was markedly affected by the BGL, severity of patients and hematocrit level during glucose control. Under hypoglycemia, the agreement between laboratory and glucometer measurements was obviously fallen and it tended to overestimate the patient's real glucose value.

Using Contribution Analysis to Evaluate the Impacts of Research on Policy: Getting to "Good Enough"

ERIC Educational Resources Information Center

Riley, Barbara L.; Kernoghan, Alison; Stockton, Lisa; Montague, Steve; Yessis, Jennifer; Willis, Cameron D.

2018-01-01

Assessing societal impacts of research is more difficult than assessing advances in knowledge. Methods to evaluate research impact on policy processes and outcomes are especially underdeveloped, and are needed to optimize the influence of research on policy for addressing complex issues such as chronic diseases. Contribution analysis (CA), a…

Influence of Gender and Other Factors to Final Grade

ERIC Educational Resources Information Center

Domeova, Ludmila; Jindrova, Andrea; Fejfar, Jiri

2015-01-01

The study focused on the relations between the partial evaluation and the final grade. The investigation has been done on a group of 269 students of the Czech University of Life Sciences in Prague, in the course of Mathematical Methods, who have to go through a strictly defined evaluation scheme. The results of statistical analysis confirmed that…

On thermal conditions and properties of thallium bromide single crystals grown by the Electro Dynamic Gradient method

NASA Astrophysics Data System (ADS)

Zheng, Zhiping; Yu, Yongtao; Gong, Shuping; Fu, Qiuyun; Zhou, Dongxiang

2013-05-01

The Electro Dynamic Gradient (EDG) method has been proved to be a feasible way to grow TlBr crystals in our previous work. In this research, the influence of thermal conditions such as cooling rate during growth process on the crystal performance was investigated. Crystals of approximately 12 mm diameter were obtained by the EDG method at different cooling rates during the growth process, and the quality of the crystals was routinely evaluated by X-ray diffraction (XRD), infrared (IR) and ultraviolet (UV) transmission, I-V measurement and energy response spectrum. The results proved that thermal conditions during growth had a profound influence on the characteristics of the crystals.

The role of observational reference data for climate downscaling: Insights from the VALUE COST Action

NASA Astrophysics Data System (ADS)

Kotlarski, Sven; Gutiérrez, José M.; Boberg, Fredrik; Bosshard, Thomas; Cardoso, Rita M.; Herrera, Sixto; Maraun, Douglas; Mezghani, Abdelkader; Pagé, Christian; Räty, Olle; Stepanek, Petr; Soares, Pedro M. M.; Szabo, Peter

2016-04-01

VALUE is an open European network to validate and compare downscaling methods for climate change research (http://www.value-cost.eu). A key deliverable of VALUE is the development of a systematic validation framework to enable the assessment and comparison of downscaling methods. Such assessments can be expected to crucially depend on the existence of accurate and reliable observational reference data. In dynamical downscaling, observational data can influence model development itself and, later on, model evaluation, parameter calibration and added value assessment. In empirical-statistical downscaling, observations serve as predictand data and directly influence model calibration with corresponding effects on downscaled climate change projections. We here present a comprehensive assessment of the influence of uncertainties in observational reference data and of scale-related issues on several of the above-mentioned aspects. First, temperature and precipitation characteristics as simulated by a set of reanalysis-driven EURO-CORDEX RCM experiments are validated against three different gridded reference data products, namely (1) the EOBS dataset (2) the recently developed EURO4M-MESAN regional re-analysis, and (3) several national high-resolution and quality-controlled gridded datasets that recently became available. The analysis reveals a considerable influence of the choice of the reference data on the evaluation results, especially for precipitation. It is also illustrated how differences between the reference data sets influence the ranking of RCMs according to a comprehensive set of performance measures.

Investigation of laser Doppler techniques using the Monte Carlo method

NASA Astrophysics Data System (ADS)

Ruetten, Walter; Gellekum, Thomas; Jessen, Katrin

1995-01-01

Laser Doppler techniques are increasingly used in research and clinical applications to study perfusion phenomena in the skin, yet the influences of changing scattering parameters and geometry on the measure of perfusion are not well explored. To investigate these influences, a simulation program based on the Monte Carlo method was developed, which is capable of determining the Doppler spectra caused by moving red blood cells. The simulation model allows for the definition of arbitrary networks of blood vessels with individual velocities. The volume is represented by a voxel tree with adaptive spatial resolution which contains references to the optical properties and is used to store the location dependent photon fluence determined during the simulation. Two evaluation methods for Doppler spectra from biological tissue described in the literate were investigated with the simulation program. The results obtained suggest that both methods give a measure of perfusion nearly proportional to the velocity of the red blood cells. However, simulations done with different geometries of the blood vessels seem to indicate a nonlinear behavior concerning the concentration of red blood cells in the measurement volume. Nevertheless these simulation results may help in the interpretation of measurements obtained from devices using the investigated evaluation methods.

New methodology for evaluating osteoclastic activity induced by orthodontic load

PubMed Central

ARAÚJO, Adriele Silveira; FERNANDES, Alline Birra Nolasco; MACIEL, José Vinicius Bolognesi; NETTO, Juliana de Noronha Santos; BOLOGNESE, Ana Maria

2015-01-01

Orthodontic tooth movement (OTM) is a dynamic process of bone modeling involving osteoclast-driven resorption on the compression side. Consequently, to estimate the influence of various situations on tooth movement, experimental studies need to analyze this cell. Objectives The aim of this study was to test and validate a new method for evaluating osteoclastic activity stimulated by mechanical loading based on the fractal analysis of the periodontal ligament (PDL)-bone interface. Material and Methods The mandibular right first molars of 14 rabbits were tipped mesially by a coil spring exerting a constant force of 85 cN. To evaluate the actual influence of osteoclasts on fractal dimension of bone surface, alendronate (3 mg/Kg) was injected weekly in seven of those rabbits. After 21 days, the animals were killed and their jaws were processed for histological evaluation. Osteoclast counts and fractal analysis (by the box counting method) of the PDL-bone interface were performed in histological sections of the right and left sides of the mandible. Results An increase in the number of osteoclasts and in fractal dimension after OTM only happened when alendronate was not administered. Strong correlation was found between the number of osteoclasts and fractal dimension. Conclusions Our results suggest that osteoclastic activity leads to an increase in bone surface irregularity, which can be quantified by its fractal dimension. This makes fractal analysis by the box counting method a potential tool for the assessment of osteoclastic activity on bone surfaces in microscopic examination. PMID:25760264

Influence of organizational factors on safety

DOE Office of Scientific and Technical Information (OSTI.GOV)

Haber, S.B.; Metlay, D.S.; Crouch, D.A.

There is a need for a better understanding of exactly how organizational management factors at a nuclear power plant (NPP) affect plant safety performance, either directly or indirectly, and how these factors might be observed, measured, and evaluated. The purpose of this research project is to respond to that need by developing a general methodology for characterizing these organizational and management factors, systematically collecting information on their status and integrating that information into various types of evaluative activities. Research to date has included the development of the Nuclear Organization and Management Analysis Concept (NOMAC) of a NPP, the identification ofmore » key organizational and management factors, and the identification of the methods for systematically measuring and analyzing the influence of these factors on performance. Most recently, two field studies, one at a fossil fuel plant and the other at a NPP, were conducted using the developed methodology. Results are presented from both studies highlighting the acceptability, practicality, and usefulness of the methods used to assess the influence of various organizational and management factors including culture, communication, decision-making, standardization, and oversight. 6 refs., 3 figs., 1 tab.« less

MATHEMATICAL MODELING OF PESTICIDES IN THE ENVIRONMENT: CURRENT AND FUTURE DEVELOPMENTS

EPA Science Inventory

Transport models, total ecosystem models with aggregated linear approximations, evaluative models, hierarchical models, and influence analysis methods are mathematical techniques that are particularly applicable to the problems encountered when characterizing pesticide chemicals ...

An analysis of the influence of framework aspects on the study design of health economic modeling evaluations.

PubMed

Gurtner, Sebastian

2013-04-01

Research and practical guidelines have many implications for how to structure a health economic study. A major focus in recent decades has been the quality of health economic research. In practice, the factors influencing a study design are not limited to the quest for quality. Moreover, the framework of the study is important. This research addresses three major questions related to these framework aspects. First, we want to know whether the design of health economic studies has changed over time. Second, we want to know how the subject of a study, whether it is a process or product innovation, influences the parameters of the study design. Third, one of the most important questions we will answer is whether and how the study's source of funding has an impact on the design of the research. To answer these questions, a total of 234 health economic studies were analyzed using a correspondence analysis and a logistic regression analysis. All three categories of framework factors have an influence on the aspects of the study design. Health economic studies have evolved over time, leading to the use of more advanced methods like complex sensitivity analyses. Additionally, the patient's point of view has increased in importance. The evaluation of product innovations has focused more on utility concepts. On the other hand, the source of funding may influence only a few aspects of the study design, such as the use of evaluation methods, the source of data, and the use of certain utility measures. The most important trends in health care, such as the emphasis on the patients' point of view, become increasingly established in health economic evaluations with the passage of time. Although methodological challenges remain, modern information and communication technologies provide a basis for increasing the complexity and quality of health economic studies if used frequently.

Evaluation of Human Reliability in Selected Activities in the Railway Industry

NASA Astrophysics Data System (ADS)

Sujová, Erika; Čierna, Helena; Molenda, Michał

2016-09-01

The article focuses on evaluation of human reliability in the human - machine system in the railway industry. Based on a survey of a train dispatcher and of selected activities, we have identified risk factors affecting the dispatcher`s work and the evaluated risk level of their influence on the reliability and safety of preformed activities. The research took place at the authors` work place between 2012-2013. A survey method was used. With its help, authors were able to identify selected work activities of train dispatcher's risk factors that affect his/her work and the evaluated seriousness of its influence on the reliability and safety of performed activities. Amongst the most important finding fall expressions of unclear and complicated internal regulations and work processes, a feeling of being overworked, fear for one's safety at small, insufficiently protected stations.

Subjective and objective evaluation of sense of space for vehicle occupants based on anthropometric data.

PubMed

Hiamtoe, Pitarn; Steinhardt, Florian; Köhler, Uwe; Bengler, Klaus

2012-01-01

At present, the number of the vehicle requirements has been continuously increasing. These requirements can be related to the customer as well as the technical requirements. Among these, the "feeling of space" of the occupants inside the vehicles can be regarded as one of the most important factors. In this respect, the driver and passengers should be able to experience positive feeling of space inside the vehicle. There are numerous factors that can influence the sense of space inside the vehicle. These include geometry (vehicle dimensions), light exposure, ambient lights, colors, material selection and material surface. Depending on the selection, the sense of space can be dramatically influenced by these factors. In general, human feeling is subjective and cannot be measured by any instrument. The measure can nevertheless be carried out by utilizing the method of subjective evaluation. Throughout the experiments, the method of evaluation is developed and the factors which can influence the interior feeling are analyzed. In this process, psychological perception, architectural aspects and anthropometry are considered and knowledge from the other domains is transferred in the form of a multidisciplinary approach. The experiments with an aim to evaluate the overall sense of space in the vehicle are carried out based on the physical mock up of BMW 1 series (E87). The space perception with different interior dimensions and anthropometric data of test persons are also analyzed. The use of Computer Aided Technology was shown by CATIA V5, PCMAN and RAMSIS. The results show a good correlation between the subjective evaluation and the geometric values.

[Efficiency of rehabilitation methods in the treatment of arm lymphedema after breast cancer surgery].

PubMed

Petruseviciene, Daiva; Krisciūnas, Aleksandras; Sameniene, Jūrate

2002-01-01

In this article we analyze influence of rehabilitation methods in treatment of arm lymphedema. In Kaunas oncological hospital were examined 60 women after surgery for breast cancer. The work objective was to evaluate efficiency of rehabilitation methods in treatment of arm lymphedema and in evaluate movement amplitude of shoulder joint. Two groups of women depending on rehabilitation start were evaluated. The same methods of rehabilitation were applied to both groups: physical therapy, electrostimulation, massage, lymphodrainage with apparate. Our study indicated that women, who were treated at early period of rehabilitation (3 months), showed statistically significantly (p < 0.01) better results in increase of movement amplitude of shoulder joint. However, results of treatment of arm lymphedema, comparing with women who started rehabilitation after 12 months, were equally successful--results were not statistically significantly better (p > 0.05).

Spatio-Temporal Dynamic Analysis of Sustainable Development in China Based on the Footprint Family.

PubMed

Zhao, Jing; Ma, Caihong; Zhao, Xiangui; Wang, Xiaoyu

2018-02-01

The existing index systems on sustainable evaluation are mostly based on a multi index comprehensive evaluation method. The main disadvantage of this approach is that the selection and assignment of evaluation indexes are greatly influenced by subjective factors, which can result in poor comparability of results. By contrast, the Footprint Family (including ecological footprint, carbon footprint, and water footprint) is not affected by subjective factors. The Footprint Family also covers the basic tenets of sustainable development. This paper proposes use of a sustainable development evaluation index system based on the principle of the Footprint Family, and including the ecological pressure index ( EPI ), the ecological occupancy index ( EOI ), the ecological economic coordination index ( EECI ), the GHG (Greenhouse Gas) emission index ( CEI ), the water resources stress index ( WSI ), and the sustainable development index ( SDI ). Furthermore, a standard for grading the evaluated results based on global benchmarks is formulated. The results of an empirical study in China were the following. The development situation deteriorated from 1990 to 2015. The results showed that the SDI decreased from a medium level (grade 5) to a lower-medium level (grade 4). The results of this empirical study also showed that the method of evaluation can avoid the influence of subjective factors and can be used in the evaluation of sustainable development for various temporal and spatial conditions.

Spatio-Temporal Dynamic Analysis of Sustainable Development in China Based on the Footprint Family

PubMed Central

Ma, Caihong; Zhao, Xiangui; Wang, Xiaoyu

2018-01-01

The existing index systems on sustainable evaluation are mostly based on a multi index comprehensive evaluation method. The main disadvantage of this approach is that the selection and assignment of evaluation indexes are greatly influenced by subjective factors, which can result in poor comparability of results. By contrast, the Footprint Family (including ecological footprint, carbon footprint, and water footprint) is not affected by subjective factors. The Footprint Family also covers the basic tenets of sustainable development. This paper proposes use of a sustainable development evaluation index system based on the principle of the Footprint Family, and including the ecological pressure index (EPI), the ecological occupancy index (EOI), the ecological economic coordination index (EECI), the GHG (Greenhouse Gas) emission index (CEI), the water resources stress index (WSI), and the sustainable development index (SDI). Furthermore, a standard for grading the evaluated results based on global benchmarks is formulated. The results of an empirical study in China were the following. The development situation deteriorated from 1990 to 2015. The results showed that the SDI decreased from a medium level (grade 5) to a lower-medium level (grade 4). The results of this empirical study also showed that the method of evaluation can avoid the influence of subjective factors and can be used in the evaluation of sustainable development for various temporal and spatial conditions. PMID:29389886

Ultra-thin carbon-fiber paper fabrication and carbon-fiber distribution homogeneity evaluation method

NASA Astrophysics Data System (ADS)

Zhang, L. F.; Chen, D. Y.; Wang, Q.; Li, H.; Zhao, Z. G.

2018-01-01

A preparation technology of ultra-thin Carbon-fiber paper is reported. Carbon fiber distribution homogeneity has a great influence on the properties of ultra-thin Carbon-fiber paper. In this paper, a self-developed homogeneity analysis system is introduced to assist users to evaluate the distribution homogeneity of Carbon fiber among two or more two-value images of carbon-fiber paper. A relative-uniformity factor W/H is introduced. The experimental results show that the smaller the W/H factor, the higher uniformity of the distribution of Carbon fiber is. The new uniformity-evaluation method provides a practical and reliable tool for analyzing homogeneity of materials.

Psychological Evaluations of Patients Operated for Idiopathic Scoliosis by the Harrington Method.

ERIC Educational Resources Information Center

Orvomaa, E.

1998-01-01

A study of 204 patients operated on for idiopathic scoliosis by the Harrington method between 1970 and 1975 found that patients were content with their lives, tended to form families later in life, and had fewer sexual relationships. The patients felt their illness had mostly influenced their participation in work and in physical activities.…

Implementing Case Studies in a Plant Pathology Course: Impact on Student Learning and Engagement

ERIC Educational Resources Information Center

Yadav, Aman; Beckerman, Janna L.

2009-01-01

Case studies have been used in undergraduate science education as a way to develop students' critical thinking and problem-solving skills. However, little empirical evidence exists on whether this teaching method is having the desired impact on students in plant pathology courses. This study evaluated the influence of the case teaching method on…

The Lecture: A Teaching Strategy through the Looking Glass

ERIC Educational Resources Information Center

Perrin, Ronald William; Laing, Gregory Kenneth

2014-01-01

This paper explores the viability of the lecture as a teaching strategy for large groups in light of the various elements that influence the choice of method for teaching large groups. The method employed in this paper draws on the Brunswick Lens Model and Foucauldian discourse to evaluate the dominant pedagogical perspective of the past to…

Uncertainty during breast diagnostic evaluation: state of the science.

PubMed

Montgomery, Mariann

2010-01-01

To present the state of the science on uncertainty in relationship to the experiences of women undergoing diagnostic evaluation for suspected breast cancer. Published articles from Medline, CINAHL, PubMED, and PsycINFO from 1983-2008 using the following key words: breast biopsy, mammography, uncertainty, reframing, inner strength, and disruption. Fifty research studies were examined with all reporting the presence of anxiety persisting throughout the diagnostic evaluation until certitude is achieved through the establishment of a definitive diagnosis. Indirect determinants of uncertainty for women undergoing breast diagnostic evaluation include measures of anxiety, depression, social support, emotional responses, defense mechanisms, and the psychological impact of events. Understanding and influencing the uncertainty experience have been suggested to be key in relieving psychosocial distress and positively influencing future screening behaviors. Several studies examine correlational relationships among anxiety, selection of coping methods, and demographic factors that influence uncertainty. A gap exists in the literature with regard to the relationship of inner strength and uncertainty. Nurses can be invaluable in assisting women in coping with the uncertainty experience by providing positive communication and support. Nursing interventions should be designed and tested for their effects on uncertainty experienced by women undergoing a breast diagnostic evaluation.

A Comparative Analysis of Pitch Detection Methods Under the Influence of Different Noise Conditions.

PubMed

Sukhostat, Lyudmila; Imamverdiyev, Yadigar

2015-07-01

Pitch is one of the most important components in various speech processing systems. The aim of this study was to evaluate different pitch detection methods in terms of various noise conditions. Prospective study. For evaluation of pitch detection algorithms, time-domain, frequency-domain, and hybrid methods were considered by using Keele and CSTR speech databases. Each of them has its own advantages and disadvantages. Experiments have shown that BaNa method achieves the highest pitch detection accuracy. The development of methods for pitch detection, which are robust to additive noise at different signal-to-noise ratio, is an important field of research with many opportunities for enhancement the modern methods. Copyright © 2015 The Voice Foundation. Published by Elsevier Inc. All rights reserved.

Performance evaluation of the multiple-image optical compression and encryption method by increasing the number of target images

NASA Astrophysics Data System (ADS)

Aldossari, M.; Alfalou, A.; Brosseau, C.

2017-08-01

In an earlier study [Opt. Express 22, 22349-22368 (2014)], a compression and encryption method that simultaneous compress and encrypt closely resembling images was proposed and validated. This multiple-image optical compression and encryption (MIOCE) method is based on a special fusion of the different target images spectra in the spectral domain. Now for the purpose of assessing the capacity of the MIOCE method, we would like to evaluate and determine the influence of the number of target images. This analysis allows us to evaluate the performance limitation of this method. To achieve this goal, we use a criterion based on the root-mean-square (RMS) [Opt. Lett. 35, 1914-1916 (2010)] and compression ratio to determine the spectral plane area. Then, the different spectral areas are merged in a single spectrum plane. By choosing specific areas, we can compress together 38 images instead of 26 using the classical MIOCE method. The quality of the reconstructed image is evaluated by making use of the mean-square-error criterion (MSE).

Evaluation and comparison of statistical methods for early temporal detection of outbreaks: A simulation-based study

PubMed Central

Le Strat, Yann

2017-01-01

The objective of this paper is to evaluate a panel of statistical algorithms for temporal outbreak detection. Based on a large dataset of simulated weekly surveillance time series, we performed a systematic assessment of 21 statistical algorithms, 19 implemented in the R package surveillance and two other methods. We estimated false positive rate (FPR), probability of detection (POD), probability of detection during the first week, sensitivity, specificity, negative and positive predictive values and F1-measure for each detection method. Then, to identify the factors associated with these performance measures, we ran multivariate Poisson regression models adjusted for the characteristics of the simulated time series (trend, seasonality, dispersion, outbreak sizes, etc.). The FPR ranged from 0.7% to 59.9% and the POD from 43.3% to 88.7%. Some methods had a very high specificity, up to 99.4%, but a low sensitivity. Methods with a high sensitivity (up to 79.5%) had a low specificity. All methods had a high negative predictive value, over 94%, while positive predictive values ranged from 6.5% to 68.4%. Multivariate Poisson regression models showed that performance measures were strongly influenced by the characteristics of time series. Past or current outbreak size and duration strongly influenced detection performances. PMID:28715489

Mathematical simulation of bearing ring grinding process

NASA Astrophysics Data System (ADS)

Koltunov, I. I.; Gorbunova, T. N.; Tumanova, M. B.

2018-03-01

The paper suggests the method of forming a solid finite element model of the bearing ring. Implementation of the model allowed one to evaluate the influence of the inner cylindrical surface grinding scheme on the ring shape error.

[Evaluation of the influence of humidity and temperature on the drug stability by initial average rate experiment].

PubMed

He, Ning; Sun, Hechun; Dai, Miaomiao

2014-05-01

To evaluate the influence of temperature and humidity on the drug stability by initial average rate experiment, and to obtained the kinetic parameters. The effect of concentration error, drug degradation extent, humidity and temperature numbers, humidity and temperature range, and average humidity and temperature on the accuracy and precision of kinetic parameters in the initial average rate experiment was explored. The stability of vitamin C, as a solid state model, was investigated by an initial average rate experiment. Under the same experimental conditions, the kinetic parameters obtained from this proposed method were comparable to those from classical isothermal experiment at constant humidity. The estimates were more accurate and precise by controlling the extent of drug degradation, changing humidity and temperature range, or by setting the average temperature closer to room temperature. Compared with isothermal experiments at constant humidity, our proposed method saves time, labor, and materials.

Comparative analysis of quantitative efficiency evaluation methods for transportation networks

PubMed Central

He, Yuxin; Hong, Jian

2017-01-01

An effective evaluation of transportation network efficiency could offer guidance for the optimal control of urban traffic. Based on the introduction and related mathematical analysis of three quantitative evaluation methods for transportation network efficiency, this paper compares the information measured by them, including network structure, traffic demand, travel choice behavior and other factors which affect network efficiency. Accordingly, the applicability of various evaluation methods is discussed. Through analyzing different transportation network examples it is obtained that Q-H method could reflect the influence of network structure, traffic demand and user route choice behavior on transportation network efficiency well. In addition, the transportation network efficiency measured by this method and Braess’s Paradox can be explained with each other, which indicates a better evaluation of the real operation condition of transportation network. Through the analysis of the network efficiency calculated by Q-H method, it can also be drawn that a specific appropriate demand is existed to a given transportation network. Meanwhile, under the fixed demand, both the critical network structure that guarantees the stability and the basic operation of the network and a specific network structure contributing to the largest value of the transportation network efficiency can be identified. PMID:28399165

Comparative analysis of quantitative efficiency evaluation methods for transportation networks.

PubMed

He, Yuxin; Qin, Jin; Hong, Jian

2017-01-01

An effective evaluation of transportation network efficiency could offer guidance for the optimal control of urban traffic. Based on the introduction and related mathematical analysis of three quantitative evaluation methods for transportation network efficiency, this paper compares the information measured by them, including network structure, traffic demand, travel choice behavior and other factors which affect network efficiency. Accordingly, the applicability of various evaluation methods is discussed. Through analyzing different transportation network examples it is obtained that Q-H method could reflect the influence of network structure, traffic demand and user route choice behavior on transportation network efficiency well. In addition, the transportation network efficiency measured by this method and Braess's Paradox can be explained with each other, which indicates a better evaluation of the real operation condition of transportation network. Through the analysis of the network efficiency calculated by Q-H method, it can also be drawn that a specific appropriate demand is existed to a given transportation network. Meanwhile, under the fixed demand, both the critical network structure that guarantees the stability and the basic operation of the network and a specific network structure contributing to the largest value of the transportation network efficiency can be identified.

Influence of Subjectivity in Geological Mapping on the Net Penetration Rate Prediction for a Hard Rock TBM

NASA Astrophysics Data System (ADS)

Seo, Yongbeom; Macias, Francisco Javier; Jakobsen, Pål Drevland; Bruland, Amund

2018-05-01

The net penetration rate of hard rock tunnel boring machines (TBM) is influenced by rock mass degree of fracturing. This influence is taken into account in the NTNU prediction model by the rock mass fracturing factor ( k s). k s is evaluated by geological mapping, the measurement of the orientation of fractures and the spacing of fractures and fracture type. Geological mapping is a subjective procedure. Mapping results can therefore contain considerable uncertainty. The mapping data of a tunnel mapped by three researchers were compared, and the influence of the variation in geological mapping was estimated to assess the influence of subjectivity in geological mapping. This study compares predicted net penetration rates and actual net penetration rates for TBM tunneling (from field data) and suggests mapping methods that can reduce the error related to subjectivity. The main findings of this paper are as follows: (1) variation of mapping data between individuals; (2) effect of observed variation on uncertainty in predicted net penetration rates; (3) influence of mapping methods on the difference between predicted and actual net penetration rate.

Visual soil evaluation - future research requirements

NASA Astrophysics Data System (ADS)

Emmet-Booth, Jeremy; Forristal, Dermot; Fenton, Owen; Ball, Bruce; Holden, Nick

2017-04-01

A review of Visual Soil Evaluation (VSE) techniques (Emmet-Booth et al., 2016) highlighted their established utility for soil quality assessment, though some limitations were identified; (1) The examination of aggregate size, visible intra-porosity and shape forms a key assessment criterion in almost all methods, thus limiting evaluation to structural form. The addition of criteria that holistically examine structure may be desirable. For example, structural stability can be indicated using dispersion tests or examining soil surface crusting, while the assessment of soil colour may indirectly indicate soil organic matter content, a contributor to stability. Organic matter assessment may also indicate structural resilience, along with rooting, earthworm numbers or shrinkage cracking. (2) Soil texture may influence results or impeded method deployment. Modification of procedures to account for extreme texture variation is desirable. For example, evidence of compaction in sandy or single grain soils greatly differs to that in clayey soils. Some procedures incorporate separate classification systems or adjust deployment based on texture. (3) Research into impacts of soil moisture content on VSE evaluation criteria is required. Criteria such as rupture resistance and shape may be affected by moisture content. It is generally recommended that methods are deployed on moist soils and quantification of influences of moisture variation on results is necessary. (4) Robust sampling strategies for method deployment are required. Dealing with spatial variation differs between methods, but where methods can be deployed over large areas, clear instruction on sampling is required. Additionally, as emphasis has been placed on the agricultural production of soil, so the ability of VSE for exploring structural quality in terms of carbon storage, water purification and biodiversity support also requires research. References Emmet-Booth, J.P., Forristal. P.D., Fenton, O., Ball, B.C. & Holden, N.M. 2016. A review of visual soil evaluation techniques for soil structure. Soil Use and Management, 32, 623-634.

Evaluation of Nanomaterial Approaches to Damping in Epoxy Resin and Carbon Fiber/Epoxy Composite Structures by Dynamic Mechanical Analysis

NASA Technical Reports Server (NTRS)

Miller, G.; Heimann, Paula J.; Scheiman, Daniel A.; Duffy, Kirsten P.; Johnston, J. Chris; Roberts, Gary D.

2013-01-01

Vibration mitigation in composite structures has been demonstrated through widely varying methods which include both active and passive damping. Recently, nanomaterials have been investigated as a viable approach to composite vibration damping due to the large surface available to generate energy dissipation through friction. This work evaluates the influence of dispersed nanoparticles on the damping ratio of an epoxy matrix. Limited benefit was observed through dispersion methods, however nanoparticle application as a coating resulting in up to a three-fold increase in damping.

Comparative evaluation of the activity of commercial biocides in relation to micromycetes

NASA Astrophysics Data System (ADS)

Strokova, Valeria; Nelyubova, Victoria; Vasilenko, Marina; Goncharova, Elena; Rykunova, Marina; Kalatozi, Elina

2017-11-01

The paper presents the results of comparative studies of commercial biocides of Russian production, used in the technology of biostable materials for construction purposes, to micromycetes of various species and type diversity. The influence of the type of biocide additive on their fungicidal activity was established. The fungicidal effect of bioactive agents was evaluated using a disc-diffusion method. The analysis of the results is carried out both using the traditional approach and a modified method using a scoring of the degree of impact.

Cleanliness Policy Implementation: Evaluating Retribution Model to Rise Public Satisfaction

NASA Astrophysics Data System (ADS)

Dailiati, Surya; Hernimawati; Prihati; Chintia Utami, Bunga

2018-05-01

This research is based on the principal issues concerning the evaluation of cleanliness retribution policy which has not been optimally be able to improve the Local Revenue of Pekanbaru City and has not improved the cleanliness of Pekanbaru City. It was estimated to be caused by the performance of Garden and Sanitation Department are not in accordance with the requirement of society of Pekanbaru City. The research method used in this study is a mixed method with sequential exploratory strategy. The data collection used are observation, interview and documentation for qualitative research as well as questionnaires for quantitative research. The collected data were analyzed with interactive model of Miles and Huberman for qualitative research and multiple regression analysis for quantitative research. The research result indicated that the model of cleanliness policy implementation that can increase of PAD Pekanbaru City and be able to improve people’s satisfaction divided into two (2) which are the evaluation model and the society satisfaction model. The evaluation model influence by criteria/variable of effectiveness, efficiency, adequacy, equity, responsiveness, and appropriateness, while the society satisfaction model influence by variables of society satisfaction, intentions, goals, plans, programs, and appropriateness of cleanliness retribution collection policy.

Evaluating the performance of free-formed surface parts using an analytic network process

NASA Astrophysics Data System (ADS)

Qian, Xueming; Ma, Yanqiao; Liang, Dezhi

2018-03-01

To successfully design parts with a free-formed surface, the critical issue of how to evaluate and select a favourable evaluation strategy before design is raised. The evaluation of free-formed surface parts is a multiple criteria decision-making (MCDM) problem that requires the consideration of a large number of interdependent factors. The analytic network process (ANP) is a relatively new MCDM method that can systematically deal with all kinds of dependences. In this paper, the factors, which come from the life-cycle and influence the design of free-formed surface parts, are proposed. After analysing the interdependence among these factors, a Hybrid ANP (HANP) structure for evaluating the part’s curved surface is constructed. Then, a HANP evaluation of an impeller is presented to illustrate the application of the proposed method.

Evaluating fossil calibrations for dating phylogenies in light of rates of molecular evolution: a comparison of three approaches.

PubMed

Lukoschek, Vimoksalehi; Scott Keogh, J; Avise, John C

2012-01-01

Evolutionary and biogeographic studies increasingly rely on calibrated molecular clocks to date key events. Although there has been significant recent progress in development of the techniques used for molecular dating, many issues remain. In particular, controversies abound over the appropriate use and placement of fossils for calibrating molecular clocks. Several methods have been proposed for evaluating candidate fossils; however, few studies have compared the results obtained by different approaches. Moreover, no previous study has incorporated the effects of nucleotide saturation from different data types in the evaluation of candidate fossils. In order to address these issues, we compared three approaches for evaluating fossil calibrations: the single-fossil cross-validation method of Near, Meylan, and Shaffer (2005. Assessing concordance of fossil calibration points in molecular clock studies: an example using turtles. Am. Nat. 165:137-146), the empirical fossil coverage method of Marshall (2008. A simple method for bracketing absolute divergence times on molecular phylogenies using multiple fossil calibration points. Am. Nat. 171:726-742), and the Bayesian multicalibration method of Sanders and Lee (2007. Evaluating molecular clock calibrations using Bayesian analyses with soft and hard bounds. Biol. Lett. 3:275-279) and explicitly incorporate the effects of data type (nuclear vs. mitochondrial DNA) for identifying the most reliable or congruent fossil calibrations. We used advanced (Caenophidian) snakes as a case study; however, our results are applicable to any taxonomic group with multiple candidate fossils, provided appropriate taxon sampling and sufficient molecular sequence data are available. We found that data type strongly influenced which fossil calibrations were identified as outliers, regardless of which method was used. Despite the use of complex partitioned models of sequence evolution and multiple calibrations throughout the tree, saturation severely compressed basal branch lengths obtained from mitochondrial DNA compared with nuclear DNA. The effects of mitochondrial saturation were not ameliorated by analyzing a combined nuclear and mitochondrial data set. Although removing the third codon positions from the mitochondrial coding regions did not ameliorate saturation effects in the single-fossil cross-validations, it did in the Bayesian multicalibration analyses. Saturation significantly influenced the fossils that were selected as most reliable for all three methods evaluated. Our findings highlight the need to critically evaluate the fossils selected by data with different rates of nucleotide substitution and how data with different evolutionary rates affect the results of each method for evaluating fossils. Our empirical evaluation demonstrates that the advantages of using multiple independent fossil calibrations significantly outweigh any disadvantages.

Defining the methodological challenges and opportunities for an effective science of sociotechnical systems and safety.

PubMed

Waterson, Patrick; Robertson, Michelle M; Cooke, Nancy J; Militello, Laura; Roth, Emilie; Stanton, Neville A

2015-01-01

An important part of the application of sociotechnical systems theory (STS) is the development of methods, tools and techniques to assess human factors and ergonomics workplace requirements. We focus in this paper on describing and evaluating current STS methods for workplace safety, as well as outlining a set of six case studies covering the application of these methods to a range of safety contexts. We also describe an evaluation of the methods in terms of ratings of their ability to address a set of theoretical and practical questions (e.g. the degree to which methods capture static/dynamic aspects of tasks and interactions between system levels). The outcomes from the evaluation highlight a set of gaps relating to the coverage and applicability of current methods for STS and safety (e.g. coverage of external influences on system functioning; method usability). The final sections of the paper describe a set of future challenges, as well as some practical suggestions for tackling these. We provide an up-to-date review of STS methods, a set of case studies illustrating their use and an evaluation of their strengths and weaknesses. The paper concludes with a 'roadmap' for future work.

Does the performance of wet granulation and tablet hardness affect the drug dissolution profile of carvedilol in matrix tablets?

PubMed

Košir, Darjan; Ojsteršek, Tadej; Vrečer, Franc

2018-06-14

Wet granulation is mostly used process for manufacturing matrix tablets. Compared to the direct compression method, it allows for a better flow and compressibility properties of compression mixtures. Granulation, including process parameters and tableting, can influence critical quality attributes (CQAs) of hydrophilic matrix tablets. One of the most important CQAs is the drug release profile. We studied the influence of granulation process parameters (type of nozzle and water quantity used as granulation liquid) and tablet hardness on the drug release profile. Matrix tablets contained HPMC K4M hydrophilic matrix former and carvedilol as a model drug. The influence of selected HPMC characteristics on the drug release profile was also evaluated using two additional HPMC batches. For statistical evaluation, partial least square (PLS) models were generated for each time point of the drug release profile using the same number of latent factors. In this way, it was possible to evaluate how the importance of factors influencing drug dissolution changes in dependence on time throughout the drug release profile. The results of statistical evaluation show that the granulation process parameters (granulation liquid quantity and type of nozzle) and tablet hardness significantly influence the release profile. On the other hand, the influence of HPMC characteristics is negligible in comparison to the other factors studied. Using a higher granulation liquid quantity and the standard nozzle type results in larger granules with a higher density and lower porosity, which leads to a slower drug release profile. Lower tablet hardness also slows down the release profile.

Impact of parasitic thermal effects on thermoelectric property measurements by Harman method.

PubMed

Kwon, Beomjin; Baek, Seung-Hyub; Kim, Seong Keun; Kim, Jin-Sang

2014-04-01

Harman method is a rapid and simple technique to measure thermoelectric properties. However, its validity has been often questioned due to the over-simplified assumptions that this method relies on. Here, we quantitatively investigate the influence of the previously ignored parasitic thermal effects on the Harman method and develop a method to determine an intrinsic ZT. We expand the original Harman relation with three extra terms: heat losses via both the lead wires and radiation, and Joule heating within the sample. Based on the expanded Harman relation, we use differential measurement of the sample geometry to measure the intrinsic ZT. To separately evaluate the parasitic terms, the measured ZTs with systematically varied sample geometries and the lead wire types are fitted to the expanded relation. A huge discrepancy (∼28%) of the measured ZTs depending on the measurement configuration is observed. We are able to separately evaluate those parasitic terms. This work will help to evaluate the intrinsic thermoelectric property with Harman method by eliminating ambiguities coming from extrinsic effects.

An evaluation of recruitment methods utilized for a clinical trial with periodontal and diabetes enrollment criteria: the Diabetes and Periodontal Therapy Trial

PubMed Central

Schoenfeld, Elinor R; Hyman, Leslie; Simpson, Leslie Long; Michalowicz, Bryan; Reddy, Michael; Gelato, Marie; Hou, Wei; Engebretson, Steven P; Hytner, Catherine; Lenton, Pat

2014-01-01

Background Diabetes and its complications are a major United States public health concern. Methods The Diabetes and Periodontal Therapy Trial (DPTT) evaluated whether non-surgical treatment of periodontal disease influenced diabetes management among persons with Type 2 diabetes and periodontitis. The aim of this study was to evaluate DPTT’s many recruitment strategies in terms of enrollment success. Results/Conclusion Targeted recruitment strategies were more effective in identifying individuals who met periodontal and diabetes eligibility criteria. Individuals eligible for a baseline visit/enrollment were more often male, had a younger age at diabetes diagnosis, a longer diabetes duration, more often Hispanic and less often African–American. Tracking and evaluating recruitment sources during study enrollment optimized recruitment methods to enroll a diverse participant population based upon gender, race and ethnicity. PMID:25574373

A procedural model for planning and evaluating behavioral interventions.

PubMed

Hyner, G C

2005-01-01

A model for planning, implementing and evaluating health behavior change strategies is proposed. Variables are presented which can be used in the model or serve as examples for how the model is utilized once a theory of health behavior is adopted. Examples of three innovative strategies designed to influence behavior change are presented so that the proposed model can be modified for use following comprehensive screening and baseline measurements. Three measurement priorities: clients, methods and agency are subjected to three phases of assessment: goals, implementation and effects. Lifestyles account for the majority of variability in quality-of-life and premature morbidity and mortality. Interventions designed to influence healthy behavior changes must be driven by theory and carefully planned and evaluated. The proposed model is offered as a useful tool for the behavior change strategist.

Evaluation research on jiangsu green economy development capability: a case study of Xuzhou

NASA Astrophysics Data System (ADS)

Sun, Fuhua; Liu, Haiyu; Wang, Zhaoxia

2018-02-01

As a national leading province of economic development and demonstration area of ecological civilization construction, Jiangsu makes a scientific and rational evaluation to its green economy development capability through the construction of index system and model, which is significant for better grasping its green development condition, implementing the “green” development concept and promoting Jiangsu to be a new Jiangsu with “good economy, rich public, favourable environment and civilized society degree”. The paper constructs the evaluation system of green economic development capability based on factor analysis method, adjusts indexes at all levels through factor analysis, calculates the factor score, determines the main influencing factors, analyzes the influence factor score, and puts forward the corresponding policy according to the practical situation of Jiangsu Province.

Evaluation of Electromagnetic Near-Field Measurement Technique as Non-Destructive Testing for Composite Structures

NASA Astrophysics Data System (ADS)

Raad Hussein, Alaa; Badri Albarody, Thar M.; Megat Yusoff, Puteri Sri Melor Bt

2018-05-01

Nowadays there is no viable non-destructive method that could detect flaws in complex composite products. Such a method could provide unique tools to allow engineers to minimize time consumption and cost during the evaluation of various product parameters without disturbing production. The latest research and development on propagation waves introduce micro, radio and millimetre waves as new potential non-destructive test methods for evaluation of mechanical flaws and prediction of failure in a product during production. This paper focuses on recent developments, usage, classification of electromagnetic waves under the range of radio frequency, millimetre and micro-waves. In addition, this paper reviews the application of propagation wave and proposed a new health monitoring technique based on Doppler Effect for vibration measurement in complex composite structures. Doppler Effect is influenced by dynamic behaviour of the composite structures and both are effect by flaws occurred inside the structure. Composite manufacturers, especially Aerospace industry are demanding these methods comprehensively inspect and evaluate the damages and defects in their products.

Influences of Normalization Method on Biomarker Discovery in Gas Chromatography-Mass Spectrometry-Based Untargeted Metabolomics: What Should Be Considered?

PubMed

Chen, Jiaqing; Zhang, Pei; Lv, Mengying; Guo, Huimin; Huang, Yin; Zhang, Zunjian; Xu, Fengguo

2017-05-16

Data reduction techniques in gas chromatography-mass spectrometry-based untargeted metabolomics has made the following workflow of data analysis more lucid. However, the normalization process still perplexes researchers, and its effects are always ignored. In order to reveal the influences of normalization method, five representative normalization methods (mass spectrometry total useful signal, median, probabilistic quotient normalization, remove unwanted variation-random, and systematic ratio normalization) were compared in three real data sets with different types. First, data reduction techniques were used to refine the original data. Then, quality control samples and relative log abundance plots were utilized to evaluate the unwanted variations and the efficiencies of normalization process. Furthermore, the potential biomarkers which were screened out by the Mann-Whitney U test, receiver operating characteristic curve analysis, random forest, and feature selection algorithm Boruta in different normalized data sets were compared. The results indicated the determination of the normalization method was difficult because the commonly accepted rules were easy to fulfill but different normalization methods had unforeseen influences on both the kind and number of potential biomarkers. Lastly, an integrated strategy for normalization method selection was recommended.

The Influence of Breast Self-Examination on Subsequent Mammography Participation

PubMed Central

Jelinski, Susan E.; Maxwell, Colleen J.; Onysko, Jay; Bancej, Christina M.

2005-01-01

Objectives. We evaluated whether breast self-examination (BSE) influences subsequent mammography participation. Methods. We evaluated associations between BSE and subsequent mammography participation, adjusting for baseline screening behaviors and sociodemographic, health, and lifestyle characteristics, among women aged 40 years and older using data from the longitudinal Canadian National Population Health Survey. Results. Regular performance of BSE at baseline was not associated with receipt of a recent mammogram at follow-up among all women (adjusted odds ratio [OR]=1.01; 95% confidence interval [CI]= 0.75, 1.35) or with mammography uptake among the subgroup of women reporting never use at baseline (adjusted OR=0.78; 95% CI=0.50, 1.22). Conclusions. The lack of association between performance of BSE and subsequent mammography participation suggests that not recommending BSE is unlikely to influence mammography participation. PMID:15727985

Evaluation of non-volatile metabolites in beer stored at high temperature and utility as an accelerated method to predict flavour stability.

PubMed

Heuberger, Adam L; Broeckling, Corey D; Sedin, Dana; Holbrook, Christian; Barr, Lindsay; Kirkpatrick, Kaylyn; Prenni, Jessica E

2016-06-01

Flavour stability is vital to the brewing industry as beer is often stored for an extended time under variable conditions. Developing an accelerated model to evaluate brewing techniques that affect flavour stability is an important area of research. Here, we performed metabolomics on non-volatile compounds in beer stored at 37 °C between 1 and 14 days for two beer types: an amber ale and an India pale ale. The experiment determined high temperature to influence non-volatile metabolites, including the purine 5-methylthioadenosine (5-MTA). In a second experiment, three brewing techniques were evaluated for improved flavour stability: use of antioxidant crowns, chelation of pro-oxidants, and varying plant content in hops. Sensory analysis determined the hop method was associated with improved flavour stability, and this was consistent with reduced 5-MTA at both regular and high temperature storage. Future studies are warranted to understand the influence of 5-MTA on flavour and aging within different beer types. Copyright © 2016 Elsevier Ltd. All rights reserved.

Evaluation of Tack Coat Bond Strength Tests

DOT National Transportation Integrated Search

2018-05-01

Poor bonding between asphalt pavement overlays and the substrate pavement layer can greatly influence the long term performance of hot mix asphalt (HMA) in the form of premature cracking and fatigue. The primary method to achieve bonding between laye...

Method of evaluating the impact of ERP implementation critical success factors - a case study in oil and gas industries

NASA Astrophysics Data System (ADS)

Gajic, Gordana; Stankovski, Stevan; Ostojic, Gordana; Tesic, Zdravko; Miladinovic, Ljubomir

2014-01-01

The so far implemented enterprise resource planning (ERP) systems have in many cases failed to meet the requirements regarding the business process control, decrease of business costs and increase of company profit margin. Therefore, there is a real need for an evaluation of the influence of ERP on the company's performance indicators. Proposed in this article is an advanced model for the evaluation of the success of ERP implementation on organisational and operational performance indicators in oil-gas companies. The recommended method establishes a correlation between a process-based method, a scorecard model and ERP critical success factors. The method was verified and tested on two case studies in oil-gas companies using the following procedure: the model was developed, tested and implemented in a pilot gas-oil company, while the results were implemented and verified in another gas-oil company.

Influence of Mentoring on African American and Hispanic Males in High School

ERIC Educational Resources Information Center

Smith, Jacqueline A.

2016-01-01

The mixed method research study was designed to evaluate the effects on a mentoring initiative on 40 African American and Hispanic males in an urban high school. The study took place over a three-month period in a traditional public school with 2,000 students. Data collection methods used included individual interview with student mentees, surveys…

Improving IMES Localization Accuracy by Integrating Dead Reckoning Information

PubMed Central

Fujii, Kenjiro; Arie, Hiroaki; Wang, Wei; Kaneko, Yuto; Sakamoto, Yoshihiro; Schmitz, Alexander; Sugano, Shigeki

2016-01-01

Indoor positioning remains an open problem, because it is difficult to achieve satisfactory accuracy within an indoor environment using current radio-based localization technology. In this study, we investigate the use of Indoor Messaging System (IMES) radio for high-accuracy indoor positioning. A hybrid positioning method combining IMES radio strength information and pedestrian dead reckoning information is proposed in order to improve IMES localization accuracy. For understanding the carrier noise ratio versus distance relation for IMES radio, the signal propagation of IMES radio is modeled and identified. Then, trilateration and extended Kalman filtering methods using the radio propagation model are developed for position estimation. These methods are evaluated through robot localization and pedestrian localization experiments. The experimental results show that the proposed hybrid positioning method achieved average estimation errors of 217 and 1846 mm in robot localization and pedestrian localization, respectively. In addition, in order to examine the reason for the positioning accuracy of pedestrian localization being much lower than that of robot localization, the influence of the human body on the radio propagation is experimentally evaluated. The result suggests that the influence of the human body can be modeled. PMID:26828492

Assessment of Outcomes of Treatment of Fractures of Distal Femur with a Locking Plate Taking into Account Factors Influencing the Result.

PubMed

Pakuła, Grzegorz; Kwiatkowski, Krzysztof; Kuczmera, Piotr; Fudalej, Piotr

2015-10-01

The aim of this paper is to evaluate the results of treatment of distal femoral fractures (DFF) fixed with locking plates and analysis of factors that influence the final outcome. The patients were treated at the Department of Traumatology and Orthopedics, Military Medical Institute in Warsaw, and the Department of Orthopedics and Traumatology, 4th Military Research Hospital in Wroclaw. We analysed 39 patients with 42 fractures of the distal femur. Treatment results were analysed using the KOOS and KSS scales. Factors influencing the outcome were also investigated. Statistical analysis was performed using STATISTICA v. 10. Mean KOOS scores indicate a predominance of poor outcomes, while mean KSS scores indicate good outcomes. Treatment outcomes were significantly influenced by pain and limited mobility. 1. Subjective evaluation of treatment of fractures of the distal femur using the KOOS scale per form edworse than a clinical evaluation using the KSS. 2. Post-operative management should emphasise pain relief and restoration of the performance of the treated lower limb to ensure good mobility without crutches. 3. Despite the use of modern operational methods of fracture fixation, treatment of distal femur fractures is still a challenge.

Evaluating the Coda Phase Delay Method for Determining Temperature Ratios in Windy Environments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Albert, Sarah; Bowman, Daniel; Rodgers, Arthur

2017-07-01

We evaluate the acoustic coda phase delay method for estimating changes in atmospheric phenomena in realistic environments. Previous studies verifying the method took place in an environment with negligible wind. The equation for effective sound speed, which the method is based upon, shows that the influence of wind is equal to the square of temperature. Under normal conditions, wind is significant and therefore cannot be ignored. Results from this study con rm the previous statement. The acoustic coda phase delay method breaks down in non-ideal environments, namely those where wind speed and direction varies across small distances. We suggest thatmore » future studies make use of gradiometry to better understand the effect of wind on the acoustic coda and subsequent phase delays.« less

Selection of representative embankments based on rough set - fuzzy clustering method

NASA Astrophysics Data System (ADS)

Bin, Ou; Lin, Zhi-xiang; Fu, Shu-yan; Gao, Sheng-song

2018-02-01

The premise condition of comprehensive evaluation of embankment safety is selection of representative unit embankment, on the basis of dividing the unit levee the influencing factors and classification of the unit embankment are drafted.Based on the rough set-fuzzy clustering, the influence factors of the unit embankment are measured by quantitative and qualitative indexes.Construct to fuzzy similarity matrix of standard embankment then calculate fuzzy equivalent matrix of fuzzy similarity matrix by square method. By setting the threshold of the fuzzy equivalence matrix, the unit embankment is clustered, and the representative unit embankment is selected from the classification of the embankment.

Pore Interconnectivity Influences Growth Factor-Mediated Vascularization in Sphere-Templated Hydrogels

PubMed Central

Somo, Sami I.; Akar, Banu; Bayrak, Elif S.; Larson, Jeffery C.; Appel, Alyssa A.; Mehdizadeh, Hamidreza; Cinar, Ali

2015-01-01

Rapid and controlled vascularization within biomaterials is essential for many applications in regenerative medicine. The extent of vascularization is influenced by a number of factors, including scaffold architecture. While properties such as pore size and total porosity have been studied extensively, the importance of controlling the interconnectivity of pores has received less attention. A sintering method was used to generate hydrogel scaffolds with controlled pore interconnectivity. Poly(methyl methacrylate) microspheres were used as a sacrificial agent to generate porous poly(ethylene glycol) diacrylate hydrogels with interconnectivity varying based on microsphere sintering conditions. Interconnectivity levels increased with sintering time and temperature with resultant hydrogel structure showing agreement with template structure. Porous hydrogels with a narrow pore size distribution (130–150 μm) and varying interconnectivity were investigated for their ability to influence vascularization in response to gradients of platelet-derived growth factor-BB (PDGF-BB). A rodent subcutaneous model was used to evaluate vascularized tissue formation in the hydrogels in vivo. Vascularized tissue invasion varied with interconnectivity. At week 3, higher interconnectivity hydrogels had completely vascularized with twice as much invasion. Interconnectivity also influenced PDGF-BB transport within the scaffolds. An agent-based model was used to explore the relative roles of steric and transport effects on the observed results. In conclusion, a technique for the preparation of hydrogels with controlled pore interconnectivity has been developed and evaluated. This method has been used to show that pore interconnectivity can independently influence vascularization of biomaterials. PMID:25603533

Box-Counting Method of 2D Neuronal Image: Method Modification and Quantitative Analysis Demonstrated on Images from the Monkey and Human Brain.

PubMed

Rajković, Nemanja; Krstonošić, Bojana; Milošević, Nebojša

2017-01-01

This study calls attention to the difference between traditional box-counting method and its modification. The appropriate scaling factor, influence on image size and resolution, and image rotation, as well as different image presentation, are showed on the sample of asymmetrical neurons from the monkey dentate nucleus. The standard BC method and its modification were evaluated on the sample of 2D neuronal images from the human neostriatum. In addition, three box dimensions (which estimate the space-filling property, the shape, complexity, and the irregularity of dendritic tree) were used to evaluate differences in the morphology of type III aspiny neurons between two parts of the neostriatum.

Influence of relaxation processes on the evaluation of the metastable defect density in Cu(In,Ga)Se{sub 2}

DOE Office of Scientific and Technical Information (OSTI.GOV)

Maciaszek, M.; Zabierowski, P.

2016-06-07

In this contribution, we investigated by means of numerical simulations the influence of relaxation processes related to metastable defects on electrical characteristics of Cu(In,Ga)Se{sub 2}. In particular, we analyzed the relaxation of a metastable state induced by illumination at a fixed temperature as well as the dependence of the hole concentration on the temperature during cooling. The knowledge of these two relaxation processes is crucial in the evaluation of the hole concentration in the relaxed state and after light soaking. We have shown that the distribution of the metastable defects can be considered frozen below 200 K. The hole capture crossmore » section was estimated as ∼3 × 10{sup −15} cm{sup 2}. It was shown that the usually used cooling rates may lead to relevant changes of the hole concentration. We calculated the lower limit of the hole concentration after cooling, and we presented how it depends on densities of shallow acceptors and metastable defects. Moreover, we proposed a method which allows for the evaluation of shallow acceptor and metastable defect densities from two capacitance-voltage profiles measured in the relaxed and light soaking states. Finally, we indicated experimental conditions in which the influence of relaxation processes on the accuracy of this method is the smallest.« less

Using evaluation to adapt health information outreach to the complex environments of community-based organizations.

PubMed

Olney, Cynthia A

2005-10-01

After arguing that most community-based organizations (CBOs) function as complex adaptive systems, this white paper describes the evaluation goals, questions, indicators, and methods most important at different stages of community-based health information outreach. This paper presents the basic characteristics of complex adaptive systems and argues that the typical CBO can be considered this type of system. It then presents evaluation as a tool for helping outreach teams adapt their outreach efforts to the CBO environment and thus maximize success. Finally, it describes the goals, questions, indicators, and methods most important or helpful at each stage of evaluation (community assessment, needs assessment and planning, process evaluation, and outcomes assessment). Literature from complex adaptive systems as applied to health care, business, and evaluation settings is presented. Evaluation models and applications, particularly those based on participatory approaches, are presented as methods for maximizing the effectiveness of evaluation in dynamic CBO environments. If one accepts that CBOs function as complex adaptive systems-characterized by dynamic relationships among many agents, influences, and forces-then effective evaluation at the stages of community assessment, needs assessment and planning, process evaluation, and outcomes assessment is critical to outreach success.

[Present possibilities of age determination in forensic medicine with emphasis on the importance of measurement of D- and L- forms of aspartic acid. I. An overview].

PubMed

Pilin, A; Pudil, F; Gross, R; Herrmannová, M

1997-02-01

Evaluation of age of unknown deceased persons belongs to the most important ways to identification. For the time being, morphological methods are used, namely evaluation of age according to Gustafson's method from tooth grindings or by macroscopical estimation of abrasion, transparency of root dentine, alveolar atrophy and number of missing teeth. Evaluation of the data can be influenced by an individual failure and experience showed an age related decrease of precision. Recently, some papers occurred estimating a relation of D, L-forms of aspartic acid which depends on the age with a significant precision.

Impact of an online medical internet site on knowledge and practice of health care providers: a mixed methods study of the Spinal Cord Injury Rehabilitation Evidence project.

PubMed

Eng, Janice J; Noonan, Vanessa K; Townson, Andrea F; Higgins, Caroline E; Rogers, Jess; Wolfe, Dalton L

2014-12-23

It is not known whether ongoing access to a broad-based Internet knowledge resource can influence the practice of health care providers. We undertook a study to evaluate the impact of a Web-based knowledge resource on increasing access to evidence and facilitating best practice of health care providers. The objective of this study was to evaluate (1) the impact of the Spinal Cord Injury Rehabilitation Evidence (SCIRE) project on access to information for health care providers and researchers and (2) how SCIRE influenced health care providers' management of clients. A 4-part mixed methods evaluation was undertaken: (1) monitoring website traffic and utilization using Google Analytics, (2) online survey of users who accessed the SCIRE website, (3) online survey of targeted end-users, that is, rehabilitation health care providers known to work with spinal cord injury (SCI) clients, as well as researchers, and (4) focus groups with health care providers who had previously accessed SCIRE. The online format allowed the content for a relatively specialized field to have far reach (eg, 26 countries and over 6500 users per month). The website survey and targeted end-user survey confirmed that health care providers, as well as researchers perceived that the website increased their access to SCI evidence. Access to SCIRE not only improved knowledge of SCI evidence but helped inform changes to the health providers' clinical practice and improved their confidence in treating SCI clients. The SCIRE information directly influenced the health providers' clinical decision making, in terms of choice of intervention, equipment needs, or assessment tool. A Web-based knowledge resource may be a relatively inexpensive method to increase access to evidence-based information, increase knowledge of the evidence, inform changes to the health providers' practice, and influence their clinical decision making.

Uncertainty evaluation of mass values determined by electronic balances in analytical chemistry: a new method to correct for air buoyancy.

PubMed

Wunderli, S; Fortunato, G; Reichmuth, A; Richard, Ph

2003-06-01

A new method to correct for the largest systematic influence in mass determination-air buoyancy-is outlined. A full description of the most relevant influence parameters is given and the combined measurement uncertainty is evaluated according to the ISO-GUM approach [1]. A new correction method for air buoyancy using an artefact is presented. This method has the advantage that only a mass artefact is used to correct for air buoyancy. The classical approach demands the determination of the air density and therefore suitable equipment to measure at least the air temperature, the air pressure and the relative air humidity within the demanded uncertainties (i.e. three independent measurement tasks have to be performed simultaneously). The calculated uncertainty is lower for the classical method. However a field laboratory may not always be in possession of fully traceable measurement systems for these room climatic parameters.A comparison of three approaches applied to the calculation of the combined uncertainty of mass values is presented. Namely the classical determination of air buoyancy, the artefact method, and the neglecting of this systematic effect as proposed in the new EURACHEM/CITAC guide [2]. The artefact method is suitable for high-precision measurement in analytical chemistry and especially for the production of certified reference materials, reference values and analytical chemical reference materials. The method could also be used either for volume determination of solids or for air density measurement by an independent method.

Performance evaluation of chip seals in Idaho.

DOT National Transportation Integrated Search

2010-08-01

The intent of this research project is to identify a wide variety of parameters that influence the performance of pavements treated via chip seals within the State of Idaho. Chip sealing is currently one of the most popular methods of maintenance for...

Evaluating a Model of Youth Physical Activity

ERIC Educational Resources Information Center

Heitzler, Carrie D.; Lytle, Leslie A.; Erickson, Darin J.; Barr-Anderson, Daheia; Sirard, John R.; Story, Mary

2010-01-01

Objective: To explore the relationship between social influences, self-efficacy, enjoyment, and barriers and physical activity. Methods: Structural equation modeling examined relationships between parent and peer support, parent physical activity, individual perceptions, and objectively measured physical activity using accelerometers among a…

mHealth Series: Factors influencing sample size calculations for mHealth–based studies – A mixed methods study in rural China

PubMed Central

van Velthoven, Michelle Helena; Li, Ye; Wang, Wei; Du, Xiaozhen; Chen, Li; Wu, Qiong; Majeed, Azeem; Zhang, Yanfeng; Car, Josip

2013-01-01

Background An important issue for mHealth evaluation is the lack of information for sample size calculations. Objective To explore factors that influence sample size calculations for mHealth–based studies and to suggest strategies for increasing the participation rate. Methods We explored factors influencing recruitment and follow–up of participants (caregivers of children) in an mHealth text messaging data collection cross–over study. With help of village doctors, we recruited 1026 (25%) caregivers of children under five out of the 4170 registered. To explore factors influencing recruitment and provide recommendations for improving recruitment, we conducted semi–structured interviews with village doctors. Of the 1014 included participants, 662 (65%) responded to the first question about willingness to participate, 538 (53%) responded to the first survey question and 356 (35%) completed the text message survey. To explore factors influencing follow–up and provide recommendations for improving follow–up, we conducted interviews with participants. We added views from the researchers who were involved in the study to contextualize the findings. Results We found several factors influencing recruitment related to the following themes: experiences with recruitment, village doctors’ work, village doctors’ motivations, caregivers’ characteristics, caregivers’ motivations. Village doctors gave several recommendations for ways to recruit more caregivers and we added our views to these. We found the following factors influencing follow–up: mobile phone usage, ability to use mobile phone, problems with mobile phone, checking mobile phone, available time, paying back text message costs, study incentives, subjective norm, culture, trust, perceived usefulness of process, perceived usefulness of outcome, perceived ease of use, attitude, behavioural intention to use, and actual use. From our perspective, factors influencing follow–up were: different caregivers participating in face–to–face and text message survey, sending text messages manually, participants responding incorrectly, and technical issues. Participants provided several recommendations for improving follow–up and we added our views to these. Conclusions This is the first study to evaluate factors influencing recruitment and follow–up of participants in an mHealth study in a middle–income setting. More work is needed to assess effectiveness of our suggested strategies. This work would improve evaluation of mHealth interventions. PMID:24363922

Process service quality evaluation based on Dempster-Shafer theory and support vector machine.

PubMed

Pei, Feng-Que; Li, Dong-Bo; Tong, Yi-Fei; He, Fei

2017-01-01

Human involvement influences traditional service quality evaluations, which triggers an evaluation's low accuracy, poor reliability and less impressive predictability. This paper proposes a method by employing a support vector machine (SVM) and Dempster-Shafer evidence theory to evaluate the service quality of a production process by handling a high number of input features with a low sampling data set, which is called SVMs-DS. Features that can affect production quality are extracted by a large number of sensors. Preprocessing steps such as feature simplification and normalization are reduced. Based on three individual SVM models, the basic probability assignments (BPAs) are constructed, which can help the evaluation in a qualitative and quantitative way. The process service quality evaluation results are validated by the Dempster rules; the decision threshold to resolve conflicting results is generated from three SVM models. A case study is presented to demonstrate the effectiveness of the SVMs-DS method.

Design simplicity influences patient portal use: the role of aesthetic evaluations for technology acceptance

PubMed Central

Watkins, Ivan; Mackert, Michael S; Xie, Bo; Stephens, Keri K; Shalev, Heidi

2016-01-01

Objective This study focused on patient portal use and investigated whether aesthetic evaluations of patient portals function are antecedent variables to variables in the Technology Acceptance Model. Methods A cross-sectional survey of current patient portals users (N = 333) was conducted online. Participants completed the Visual Aesthetics of Website Inventory, along with items measuring perceived ease of use (PEU), perceived usefulness (PU), and behavioral intentions (BIs) to use the patient portal. Results The hypothesized model accounted for 29% of the variance in BIs to use the portal, 46% of the variance in the PU of the portal, and 29% of the variance in the portal’s PEU. Additionally, one dimension of the aesthetic evaluations functions as a predictor in the model – simplicity evaluations had a significant positive effect on PEU. Conclusion This study provides evidence that aesthetic evaluations – specifically regarding simplicity – function as a significant antecedent variable to patients’ use of patient portals and should influence patient portal design strategies. PMID:26635314

A Numerical Analysis of Electromagnetic Scattering from Two-Dimensional Edge Terminations

NASA Technical Reports Server (NTRS)

Gray, B. E.; Dominek, A. K.; Wang, N.

1995-01-01

Several techniques that influence the low frequency scattering from penetrable edge terminations are evaluated using a hybrid finite element and boundary element method code. The edge terminations consist of a dielectric skin forming an exterior shape with an internal conducting bulkhead. Some of the techniques considered are bulkhead shaping, internal material loading, placement of resistive cards, and the placement of lossy dielectric material rods. The intent of the various treatments is to find a combination or combinations that influence(s) the backscattered field to acceptable levels over a range of frequencies for both transverse magnetic and transverse electric polarizations.

IEA EBC annex 53: Total energy use in buildings—Analysis and evaluation methods

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yoshino, Hiroshi; Hong, Tianzhen; Nord, Natasa

One of the most significant barriers to achieving deep building energy efficiency is a lack of knowledge about the factors determining energy use. In fact, there is often a significant discrepancy between designed and real energy use in buildings, which is poorly understood but are believed to have more to do with the role of human behavior than building design. Building energy use is mainly influenced by six factors: climate, building envelope, building services and energy systems, building operation and maintenance, occupants’ activities and behavior, and indoor environmental quality. In the past, much research focused on the first three factors.more » However, the next three human-related factors can have an influence as significant as the first three. Annex 53 employed an interdisciplinary approach, integrating building science, architectural engineering, computer modeling and simulation, and social and behavioral science to develop and apply methods to analyze and evaluate the real energy use in buildings considering the six influencing factors. Finally, outcomes from Annex 53 improved understanding and strengthen knowledge regarding the robust prediction of total energy use in buildings, enabling reliable quantitative assessment of energy-savings measures, policies, and techniques.« less

IEA EBC annex 53: Total energy use in buildings—Analysis and evaluation methods

DOE PAGES

Yoshino, Hiroshi; Hong, Tianzhen; Nord, Natasa

2017-07-18

One of the most significant barriers to achieving deep building energy efficiency is a lack of knowledge about the factors determining energy use. In fact, there is often a significant discrepancy between designed and real energy use in buildings, which is poorly understood but are believed to have more to do with the role of human behavior than building design. Building energy use is mainly influenced by six factors: climate, building envelope, building services and energy systems, building operation and maintenance, occupants’ activities and behavior, and indoor environmental quality. In the past, much research focused on the first three factors.more » However, the next three human-related factors can have an influence as significant as the first three. Annex 53 employed an interdisciplinary approach, integrating building science, architectural engineering, computer modeling and simulation, and social and behavioral science to develop and apply methods to analyze and evaluate the real energy use in buildings considering the six influencing factors. Finally, outcomes from Annex 53 improved understanding and strengthen knowledge regarding the robust prediction of total energy use in buildings, enabling reliable quantitative assessment of energy-savings measures, policies, and techniques.« less

Cage Change Influences Serum Corticosterone and Anxiety-Like Behaviors in the Mouse

PubMed Central

Rasmussen, Skye; Miller, Melinda M.; Filipski, Sarah B.; Tolwani, Ravi J.

2011-01-01

Environmental variables and husbandry practices can influence physiology and alter behavior in mice. Our study evaluated the effects of cage change on serum corticosterone levels and anxiety-like behaviors in C57BL/6 male mice. We examined the effects of 3 different methods of performing cage transfer and of transferring mice to a clean or a dirty familiar cage microenvironment. The 3 different handling methods were forceps transfer, gentle transfer with gloved hands, and a passive transfer technique that did not involve active handling. Active handling methods and transfer to both clean and dirty cage microenvironments significantly increased serum corticosterone 15 min after cage change; however, at 60 min after cage change, levels were comparable to those of unmanipulated mice. Although the effects were transient, cage change altered anxiety-like behaviors in the open field when behavioral testing was performed on the same day. These results demonstrate that the timing of cage change can influence behavioral results, an effect that is an important consideration for rodent behavioral studies. PMID:21838975

Evaluating Point of Sale Tobacco Marketing Using Behavioral Laboratory Methods

PubMed Central

Robinson, Jason D.; Drobes, David J.; Brandon, Thomas H.; Wetter, David W.; Cinciripini, Paul M.

2018-01-01

With passage of the 2009 Family Smoking Prevention and Tobacco Control Act, the FDA has authority to regulate tobacco advertising. As bans on traditional advertising venues and promotion of tobacco products have grown, a greater emphasis has been placed on brand exposure and price promotion in displays of products at the point-of-sale (POS). POS marketing seeks to influence attitudes and behavior towards tobacco products using a variety of explicit and implicit messaging approaches. Behavioral laboratory methods have the potential to provide the FDA with a strong scientific base for regulatory actions and a model for testing future manipulations of POS advertisements. We review aspects of POS marketing that potentially influence smoking behavior, including branding, price promotions, health claims, the marketing of emerging tobacco products, and tobacco counter-advertising. We conceptualize how POS marketing potentially influence individual attention, memory, implicit attitudes, and smoking behavior. Finally, we describe specific behavioral laboratory methods that can be adapted to measure the impact of POS marketing on these domains.

Evaluation of trade influence on economic growth rate by computational intelligence approach

NASA Astrophysics Data System (ADS)

Sokolov-Mladenović, Svetlana; Milovančević, Milos; Mladenović, Igor

2017-01-01

In this study was analyzed the influence of trade parameters on the economic growth forecasting accuracy. Computational intelligence method was used for the analyzing since the method can handle highly nonlinear data. It is known that the economic growth could be modeled based on the different trade parameters. In this study five input parameters were considered. These input parameters were: trade in services, exports of goods and services, imports of goods and services, trade and merchandise trade. All these parameters were calculated as added percentages in gross domestic product (GDP). The main goal was to select which parameters are the most impactful on the economic growth percentage. GDP was used as economic growth indicator. Results show that the imports of goods and services has the highest influence on the economic growth forecasting accuracy.

The method of micro-motion cycle feature extraction based on confidence coefficient evaluation criteria

NASA Astrophysics Data System (ADS)

Tang, Chuanzi; Ren, Hongmei; Bo, Li; Jing, Huang

2017-11-01

In radar target recognition, the micro motion characteristics of target is one of the characteristics that researchers pay attention to at home and abroad, in which the characteristics of target precession cycle is one of the important characteristics of target movement characteristics. Periodic feature extraction methods have been studied for years, the complex shape of the target and the scattering center stack lead to random fluctuations of the RCS. These random fluctuations also exist certain periodicity, which has a great influence on the target recognition result. In order to solve the problem, this paper proposes a extraction method of micro-motion cycle feature based on confidence coefficient evaluation criteria.

Multiple attribute decision making model and application to food safety risk evaluation.

PubMed

Ma, Lihua; Chen, Hong; Yan, Huizhe; Yang, Lifeng; Wu, Lifeng

2017-01-01

Decision making for supermarket food purchase decisions are characterized by network relationships. This paper analyzed factors that influence supermarket food selection and proposes a supplier evaluation index system based on the whole process of food production. The author established the intuitive interval value fuzzy set evaluation model based on characteristics of the network relationship among decision makers, and validated for a multiple attribute decision making case study. Thus, the proposed model provides a reliable, accurate method for multiple attribute decision making.

INFLUENCE OF EXERCISE TESTING IN GASTROESOPHAGEAL REFLUX IN PATIENTS WITH GASTROESOPHAGEAL REFLUX DISEASE

PubMed Central

MENDES-FILHO, Antonio Moreira; MORAES-FILHO, Joaquim Prado Pinto; NASI, Ary; EISIG, Jaime Natan; RODRIGUES, Tomas Navarro; BARBUTTI, Ricardo Correa; CAMPOS, Josemberg Marins; CHINZON, Décio

2014-01-01

Background Gastroesophageal reflux disease is a worldwide prevalent condition that exhibits a large variety of signs and symptoms of esophageal or extra-esophageal nature and can be related to the esophagic adenocarcinoma. In the last few years, greater importance has been given to the influence of physical exercises on it. Some recent investigations, though showing conflicting results, point to an exacerbation of gastroesophageal reflux during physical exercises. Aim To evaluate the influence of physical activities in patients presenting with erosive and non erosive disease by ergometric stress testing and influence of the lower esophageal sphincter tonus and body mass index during this situation. Methods Twenty-nine patients with erosive disease (group I) and 10 patients with non-erosive disease (group II) were prospectively evaluated. All the patients were submitted to clinical evaluation, followed by upper digestive endoscopy, manometry and 24 h esophageal pH monitoring. An ergometric testing was performed 1 h before removing the esophageal pH probe. During the ergometric stress testing, the following variables were analyzed: test efficacy, maximum oxygen uptake, acid reflux duration, gastroesophageal reflux symptoms, influence of the lower esophageal sphincter tonus and influence of body mass index in the occurrence of gastroesophageal reflux during these physical stress. Results Maximum oxigen consumption or VO 2 max, showed significant correlation when it was 70% or higher only in the erosive disease group, evaluating the patients with or without acid reflux during the ergometric testing (p=0,032). The other considered variables didn't show significant correlations between gastroesophageal reflux and physical activity (p>0,05). Conclusions 1) Highly intensive physical activity can predispose the occurrence of gastroesophageal reflux episodes in gastroesophageal reflux disease patients with erosive disease; 2) light or short sessions of physical activity have no influence on reflux, regardless of body mass index; 3) the lower esophageal sphincter tonus does not influence the occurrence of reflux disease episodes during exercise testing. PMID:24676289

Influence of engine coolant composition on the electrochemical degradation behavior of EPDM radiator hoses

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vroomen, G.L.M.; Lievens, S.S.; Maes, J.P.

1999-08-01

EPDM (ethylene-propylene rubber) has been used for more than 25 years as the main elastomer in radiator hoses because it offers a well-balanced price/performance ratio in this field of application. Some years ago the automotive and rubber industry became aware of a problem called electrochemical degradation and cracking. Cooling systems broke down due to a typical cracking failure of some radiator hoses. Different test methods were developed to simulate and solve the problem on laboratory scale. The influence of different variables with respect to the electrochemical degradation and cracking. Cooling systems broke down due to a typical cracking failure ofmore » some radiator hoses. Different test methods were developed to simulate and solve the problem on laboratory scale. The influence of different variables with respect to the electrochemical degradation process has been investigated, but until recently the influence of the engine coolant was ignored. Using a test method developed by DSM elastomers, the influence of the composition of the engine coolant as well as of the EPDM composition has now been evaluated. This paper gives an overview of test results with different coolant technologies and offers a plausible explanation of the degradation mechanisms as a function of the elastomer composition.« less

Identifying influential directors in the United States corporate governance network

NASA Astrophysics Data System (ADS)

Huang, Xuqing; Vodenska, Irena; Wang, Fengzhong; Havlin, Shlomo; Stanley, H. Eugene

2011-10-01

The influence of directors has been one of the most engaging topics recently, but surprisingly little research has been done to quantitatively evaluate the influence and power of directors. We analyze the structure of the US corporate governance network for the 11-year period 1996-2006 based on director data from the Investor Responsibility Research Center director database, and we develop a centrality measure named the influence factor to estimate the influence of directors quantitatively. The US corporate governance network is a network of directors with nodes representing directors and links between two directors representing their service on common company boards. We assume that information flows in the network through information-sharing processes among linked directors. The influence factor assigned to a director is based on the level of information that a director obtains from the entire network. We find that, contrary to commonly accepted belief that directors of large companies, measured by market capitalization, are the most powerful, in some instances, the directors who are influential do not necessarily serve on boards of large companies. By applying our influence factor method to identify the influential people contained in the lists created by popular magazines such as Fortune, Networking World, and Treasury and Risk Management, we find that the influence factor method is consistently either the best or one of the two best methods in identifying powerful people compared to other general centrality measures that are used to denote the significance of a node in complex network theory.

Identifying influential directors in the United States corporate governance network.

PubMed

Huang, Xuqing; Vodenska, Irena; Wang, Fengzhong; Havlin, Shlomo; Stanley, H Eugene

2011-10-01

The influence of directors has been one of the most engaging topics recently, but surprisingly little research has been done to quantitatively evaluate the influence and power of directors. We analyze the structure of the US corporate governance network for the 11-year period 1996-2006 based on director data from the Investor Responsibility Research Center director database, and we develop a centrality measure named the influence factor to estimate the influence of directors quantitatively. The US corporate governance network is a network of directors with nodes representing directors and links between two directors representing their service on common company boards. We assume that information flows in the network through information-sharing processes among linked directors. The influence factor assigned to a director is based on the level of information that a director obtains from the entire network. We find that, contrary to commonly accepted belief that directors of large companies, measured by market capitalization, are the most powerful, in some instances, the directors who are influential do not necessarily serve on boards of large companies. By applying our influence factor method to identify the influential people contained in the lists created by popular magazines such as Fortune, Networking World, and Treasury and Risk Management, we find that the influence factor method is consistently either the best or one of the two best methods in identifying powerful people compared to other general centrality measures that are used to denote the significance of a node in complex network theory.

Mechanisms of deterioration of nutrients. [freeze drying methods for space flight food

NASA Technical Reports Server (NTRS)

Karel, M.; Flink, J. M.

1974-01-01

Methods are reported by which freeze dried foods of improved quality will be produced. The applicability of theories of flavor retention has been demonstrated for a number of food polymers, both proteins and polysacchardies. Studies on the formation of structures during freeze drying have been continued for emulsified systems. Deterioration of organoleptic quality of freeze dried foods due to high temperature heating has been evaluated and improved procedures developed. The influence of water activity and high temperature on retention of model flavor materials and browning deterioration has been evaluated for model systems and food materials.

TOTAL PAH EXPOSURES OF NINE PRESCHOOL CHILDREN

EPA Science Inventory

This study evaluates the influence of denuder sampling methods and filter collection media on the measurement of semi-volatile organic carbon (SVOC) associated with PM2.5. Two types of collection media, charcoal (activated carbon) and XAD, were used both in diffusion denuders ...

Simple analysis of the effect of construction materials on bridge impact factors

DOT National Transportation Integrated Search

1999-06-01

The purpose of this research is to study the influence of different construction materials on the dynamic impact factor of bridges. Initially, introduction of the dynamic impact factor and some evaluation methods are presented. A comparison of the re...

An evaluation of the interaction of place and community-based participatory research as a research methodology in the implementation of a sexually transmitted infection intervention for Greenlandic youth.

PubMed

Rink, Elizabeth

2016-01-01

Newly emerging research suggests that the actual physical location of a study and the geographic context in which a study is implemented influences the types of research methods most appropriate to use in a study as well as the study's research outcomes. This article presents a reflection on the extent to which place influenced the use of community-based participatory research (CBPR) as a research methodology in the implementation of an intervention to address sexually transmitted infections in Greenland. An evaluation of the interaction between place and CBPR suggests that the physicality of place influenced the intervention's successes and challenges. Future research that uses CBPR as a research methodology in sexual and reproductive health research in the Arctic warrants situating the research design, implementation and outcomes within the context of place.

Effects of various fire-retardants on plate shear and five-point flexural shear properties of plywood

Treesearch

Nadir Ayrilmis; Jerrold E. Winandy

2007-01-01

The influence of four fire-retardant systems on the planar (rolling) shear properties of structural hardwood plywood is evaluated using two possible ASTM D2718 test methodologies: the plate-shear method and the five-point flexural shear method. Knowing the planar shear properties and the potential of the various fire-retardant systems to affect properties is critical...

Prerequisites of Colonoscopy

PubMed Central

Hong, Kyong Hee

2014-01-01

Colonoscopy is a widely accepted method for the evaluation of the colon and terminal ileum. Its diagnostic accuracy and therapeutic safety are influenced by prerequisites, including modulation of medication and bowel cleansing. Appropriate choices of sedative medication and bowel-cleansing regimen, together with diet modification, should be made based on the patient's underlying disease, age, and medication intake. Moreover, effective methods for patient education regarding bowel preparation should be considered. PMID:25133119

Performance Ratings: Designs for Evaluating Their Validity and Accuracy.

DTIC Science & Technology

1986-07-01

ratees with substantial validity and with little bias due to the ethod for rating. Convergent validity and discriminant validity account for approximately...The expanded research design suggests that purpose for the ratings has little influence on the multitrait-multimethod properties of the ratings...Convergent and discriminant validity again account for substantial differences in the ratings of performance. Little method bias is present; both methods of

Factors Associated with School Teachers' Perceived Needs and Level of Adoption of HIV Prevention Education in Lusaka, Zambia

ERIC Educational Resources Information Center

Henning, Margaret; Chi, Chunheui; Khanna, Sunil K.

2011-01-01

Objective: The purpose of this study was to evaluate the socio-cultural variables that may influence teachers' adoption of classroom-based HIV/AIDS education within the school setting and among school types in Zambia's Lusaka Province. Method: Mixed methods were used to collect original data. Using semi-structured interviews (n=11) and a survey…

A survey of methods for the evaluation of tissue engineering scaffold permeability.

PubMed

Pennella, F; Cerino, G; Massai, D; Gallo, D; Falvo D'Urso Labate, G; Schiavi, A; Deriu, M A; Audenino, A; Morbiducci, Umberto

2013-10-01

The performance of porous scaffolds for tissue engineering (TE) applications is evaluated, in general, in terms of porosity, pore size and distribution, and pore tortuosity. These descriptors are often confounding when they are applied to characterize transport phenomena within porous scaffolds. On the contrary, permeability is a more effective parameter in (1) estimating mass and species transport through the scaffold and (2) describing its topological features, thus allowing a better evaluation of the overall scaffold performance. However, the evaluation of TE scaffold permeability suffers of a lack of uniformity and standards in measurement and testing procedures which makes the comparison of results obtained in different laboratories unfeasible. In this review paper we summarize the most important features influencing TE scaffold permeability, linking them to the theoretical background. An overview of methods applied for TE scaffold permeability evaluation is given, presenting experimental test benches and computational methods applied (1) to integrate experimental measurements and (2) to support the TE scaffold design process. Both experimental and computational limitations in the permeability evaluation process are also discussed.

Defining the methodological challenges and opportunities for an effective science of sociotechnical systems and safety

PubMed Central

Waterson, Patrick; Robertson, Michelle M.; Cooke, Nancy J.; Militello, Laura; Roth, Emilie; Stanton, Neville A.

2015-01-01

An important part of the application of sociotechnical systems theory (STS) is the development of methods, tools and techniques to assess human factors and ergonomics workplace requirements. We focus in this paper on describing and evaluating current STS methods for workplace safety, as well as outlining a set of six case studies covering the application of these methods to a range of safety contexts. We also describe an evaluation of the methods in terms of ratings of their ability to address a set of theoretical and practical questions (e.g. the degree to which methods capture static/dynamic aspects of tasks and interactions between system levels). The outcomes from the evaluation highlight a set of gaps relating to the coverage and applicability of current methods for STS and safety (e.g. coverage of external influences on system functioning; method usability). The final sections of the paper describe a set of future challenges, as well as some practical suggestions for tackling these. Practitioner Summary: We provide an up-to-date review of STS methods, a set of case studies illustrating their use and an evaluation of their strengths and weaknesses. The paper concludes with a ‘roadmap’ for future work. PMID:25832121

The influence of the image registration method on the adaptive radiotherapy. A proof of the principle in a selected case of prostate IMRT.

PubMed

Berenguer, Roberto; de la Vara, Victoria; Lopez-Honrubia, Veronica; Nuñez, Ana Teresa; Rivera, Miguel; Villas, Maria Victoria; Sabater, Sebastia

2018-01-01

To analyse the influence of the image registration method on the adaptive radiotherapy of an IMRT prostate treatment, and to compare the dose accumulation according to 3 different image registration methods with the planned dose. The IMRT prostate patient was CT imaged 3 times throughout his treatment. The prostate, PTV, rectum and bladder were segmented on each CT. A Rigid, a deformable (DIR) B-spline and a DIR with landmarks registration algorithms were employed. The difference between the accumulated doses and planned doses were evaluated by the gamma index. The Dice coefficient and Hausdorff distance was used to evaluate the overlap between volumes, to quantify the quality of the registration. When comparing adaptive vs no adaptive RT, the gamma index calculation showed large differences depending on the image registration method (as much as 87.6% in the case of DIR B-spline). The quality of the registration was evaluated using an index such as the Dice coefficient. This showed that the best result was obtained with DIR with landmarks compared with the rest and it was always above 0.77, reported as a recommended minimum value for prostate studies in a multi-centre review. Apart from showing the importance of the application of an adaptive RT protocol in a particular treatment, this work shows that the election of the registration method is decisive in the result of the adaptive radiotherapy and dose accumulation. Copyright © 2017 Associazione Italiana di Fisica Medica. Published by Elsevier Ltd. All rights reserved.

Fundamental study of compression for movie files of coronary angiography

NASA Astrophysics Data System (ADS)

Ando, Takekazu; Tsuchiya, Yuichiro; Kodera, Yoshie

2005-04-01

When network distribution of movie files was considered as reference, it could be useful that the lossy compression movie files which has small file size. We chouse three kinds of coronary stricture movies with different moving speed as an examination object; heart rate of slow, normal and fast movies. The movies of MPEG-1, DivX5.11, WMV9 (Windows Media Video 9), and WMV9-VCM (Windows Media Video 9-Video Compression Manager) were made from three kinds of AVI format movies with different moving speeds. Five kinds of movies that are four kinds of compression movies and non-compression AVI instead of the DICOM format were evaluated by Thurstone's method. The Evaluation factors of movies were determined as "sharpness, granularity, contrast, and comprehensive evaluation." In the virtual bradycardia movie, AVI was the best evaluation at all evaluation factors except the granularity. In the virtual normal movie, an excellent compression technique is different in all evaluation factors. In the virtual tachycardia movie, MPEG-1 was the best evaluation at all evaluation factors expects the contrast. There is a good compression form depending on the speed of movies because of the difference of compression algorithm. It is thought that it is an influence by the difference of the compression between frames. The compression algorithm for movie has the compression between the frames and the intra-frame compression. As the compression algorithm give the different influence to image by each compression method, it is necessary to examine the relation of the compression algorithm and our results.

The Impact of Current and Future Polar Orbiting Satellite Data on Numerical Weather Prediction at NASA/GSFC

NASA Technical Reports Server (NTRS)

Atlas, Robert

2004-01-01

The lack of adequate observational data continues to be recognized as a major factor limiting both atmospheric research and numerical prediction on a variety of temporal and spatial scales. Since the advent of meteorological satellites in the 1960's, a considerable research effort has been directed toward the design of space-borne meteorological sensors, the development of optimal methods for the utilization of these data, (and an assessment of the influence of existing satellite data and the potential influence of future satellite observations on numerical weather prediction. This has included both Observing System Experiments (OSEs) and Observing System Simulation Experiments (OSSEs). OSEs are conducted to evaluate the impact of specific observations or classes of observations on analyses and forecasts. While OSEs are performed with existing data, OSSEs are conducted to evaluate the potential for future observing systems to improve-NWP, as well as to evaluate trade-offs in observing system design, and to develop and test improved methods for data assimilation. At the conference, results from OSEs to evaluate satellite data sets that have recently become available to the global observing system, such as AIRS and Seawinds, and results from OSSEs to determine the potential impact of space-based lidar winds will be presented.

Evaluation method on steering for the shape-shifting robot in different configurations

NASA Astrophysics Data System (ADS)

Chang, Jian; Li, Bin; Wang, Chong; Zheng, Huaibing; Li, Zhiqiang

2016-01-01

The evaluation method on steering is based on qualitative manner in existence, which causes the result inaccurate and fuzziness. It reduces the efficiency of process execution. So the method by quantitative manner for the shape-shifting robot in different configurations is proposed. Comparing to traditional evaluation method, the most important aspects which can influence the steering abilities of the robot in different configurations are researched in detail, including the energy, angular velocity, time and space. In order to improve the robustness of system, the ideal and slippage conditions are all considered by mathematical model. Comparing to the traditional weighting confirming method, the extent of robot steering method is proposed by the combination of subjective and objective weighting method. The subjective weighting method can show more preferences of the experts and is based on five-grade scale. The objective weighting method is based on information entropy to determine the factors. By the sensors fixed on the robot, the contract force between track grouser and ground, the intrinsic motion characteristics of robot are obtained and the experiment is done to prove the algorithm which is proposed as the robot in different common configurations. Through the method proposed in the article, fuzziness and inaccurate of the evaluation method has been solved, so the operators can choose the most suitable configuration of the robot to fulfil the different tasks more quickly and simply.

Using Systems Thinking to Frame the Evaluation of a Complex Educational Intervention

NASA Astrophysics Data System (ADS)

Kastens, K. A.; Baldassari, C.; DeLisi, J.; Manduca, C. A.

2014-12-01

InTeGrate (serc.carleton.edu/integrate/) is the geoscience component of NSF's STEM Talent Expansion Center program. As such, it is a $10M, 5 year effort, with dual goals of improving undergraduate STEM education and addressing an important national challenge, which in InTeGrate's case is environmental sustainability. InTeGrate is very complicated, involving five PI's, dozens of curriculum developers, scores of workshops and webinars, hundreds of faculty, and thousands of students. To get a handle on this complexity, the leadership team and evaluators are viewing project activities and outcomes through a system thinking lens, analogous to how geoscientists view the Earth system. For each major component of the project, we have a flowchart logic model that traces the flows of information, materials, influence, and people that are thought to result from project activities. As is to be expected in a complex system, individual activities are often influenced by multiple inputs and contribute to multiple outputs. The systems approach allows us to spot critical points in the system where evaluative probes are needed; for example, are workshops actually resulting in a flux of new people into roles of increased responsibility within InTeGrate as intended? InTeGrate is permeated with opportunities for participants to engage in assessment, reflection and peer-review. From a systems perspective, this evaluative culture can be seen as an effort to create reinforcing feedback loops for processes that advance InTeGrate's values. For example, assessment team members review draft instructional materials against a materials development rubric and coach developers through an iterative development cycle towards materials that embody InTeGrate's priorities. Of particular interest are flows of information or influence that may carry InTeGrate's impact outward in space and time beyond activities that are directly funded by the project. For example, positive experiences during materials development may influence developers' teaching practice such that they embed InTeGrate's methods into their teaching of non-InTeGrate materials and advocate for InTeGrate methods on their campuses. Only if such influence pathways exist will InTeGrate be able to achieve national and enduring impact.

Influences of optical-spectrum errors on excess relative intensity noise in a fiber-optic gyroscope

NASA Astrophysics Data System (ADS)

Zheng, Yue; Zhang, Chunxi; Li, Lijing

2018-03-01

The excess relative intensity noise (RIN) generated from broadband sources degrades the angular-random-walk performance of a fiber-optic gyroscope dramatically. Many methods have been proposed and managed to suppress the excess RIN. However, the properties of the excess RIN under the influences of different optical errors in the fiber-optic gyroscope have not been systematically investigated. Therefore, it is difficult for the existing RIN-suppression methods to achieve the optimal results in practice. In this work, the influences of different optical-spectrum errors on the power spectral density of the excess RIN are theoretically analyzed. In particular, the properties of the excess RIN affected by the raised-cosine-type ripples in the optical spectrum are elaborately investigated. Experimental measurements of the excess RIN corresponding to different optical-spectrum errors are in good agreement with our theoretical analysis, demonstrating its validity. This work provides a comprehensive understanding of the properties of the excess RIN under the influences of different optical-spectrum errors. Potentially, it can be utilized to optimize the configurations of the existing RIN-suppression methods by accurately evaluating the power spectral density of the excess RIN.

Simulation-Based Evaluation of Hybridization Network Reconstruction Methods in the Presence of Incomplete Lineage Sorting

PubMed Central

Kamneva, Olga K; Rosenberg, Noah A

2017-01-01

Hybridization events generate reticulate species relationships, giving rise to species networks rather than species trees. We report a comparative study of consensus, maximum parsimony, and maximum likelihood methods of species network reconstruction using gene trees simulated assuming a known species history. We evaluate the role of the divergence time between species involved in a hybridization event, the relative contributions of the hybridizing species, and the error in gene tree estimation. When gene tree discordance is mostly due to hybridization and not due to incomplete lineage sorting (ILS), most of the methods can detect even highly skewed hybridization events between highly divergent species. For recent divergences between hybridizing species, when the influence of ILS is sufficiently high, likelihood methods outperform parsimony and consensus methods, which erroneously identify extra hybridizations. The more sophisticated likelihood methods, however, are affected by gene tree errors to a greater extent than are consensus and parsimony. PMID:28469378

A method for studying decision-making by guideline development groups.

PubMed

Gardner, Benjamin; Davidson, Rosemary; McAteer, John; Michie, Susan

2009-08-05

Multidisciplinary guideline development groups (GDGs) have considerable influence on UK healthcare policy and practice, but previous research suggests that research evidence is a variable influence on GDG recommendations. The Evidence into Recommendations (EiR) study has been set up to document social-psychological influences on GDG decision-making. In this paper we aim to evaluate the relevance of existing qualitative methodologies to the EiR study, and to develop a method best-suited to capturing influences on GDG decision-making. A research team comprised of three postdoctoral research fellows and a multidisciplinary steering group assessed the utility of extant qualitative methodologies for coding verbatim GDG meeting transcripts and semi-structured interviews with GDG members. A unique configuration of techniques was developed to permit data reduction and analysis. Our method incorporates techniques from thematic analysis, grounded theory analysis, content analysis, and framework analysis. Thematic analysis of individual interviews conducted with group members at the start and end of the GDG process defines discrete problem areas to guide data extraction from GDG meeting transcripts. Data excerpts are coded both inductively and deductively, using concepts taken from theories of decision-making, social influence and group processes. These codes inform a framework analysis to describe and explain incidents within GDG meetings. We illustrate the application of the method by discussing some preliminary findings of a study of a National Institute for Health and Clinical Excellence (NICE) acute physical health GDG. This method is currently being applied to study the meetings of three of NICE GDGs. These cover topics in acute physical health, mental health and public health, and comprise a total of 45 full-day meetings. The method offers potential for application to other health care and decision-making groups.

Impact of magnetic suspension stiffness on aeroelastic compressor rotor vibrations of gas pumping units

NASA Astrophysics Data System (ADS)

Mekhonoshina, E. V.; Modorskii, V. Ya.

2016-10-01

This paper describes simulation of oscillation modes in the elastic rotor supports with the gas-dynamic flow influence on the rotor in the magnetic suspension in the course of computational experiments. The system of engineering analysis ANSYS 15.0 was used as a numerical tool. The finite volume method for gas dynamics and finite element method for evaluating components of the stress-strain state (SSS) were applied for computation. The research varied magnetic suspension rigidity and estimated the SSS components in the system "gas-dynamic flow - compressor rotor - magnetic suspensions." The influence of aeroelastic effects on the impeller and the rotor on the deformability of vibration magnetic suspension was detected.

The Influencing Factor Analysis on the Performance Evaluation of Assembly Line Balancing Problem Level 1 (SALBP-1) Based on ANOVA Method

NASA Astrophysics Data System (ADS)

Chen, Jie; Hu, Jiangnan

2017-06-01

Industry 4.0 and lean production has become the focus of manufacturing. A current issue is to analyse the performance of the assembly line balancing. This study focus on distinguishing the factors influencing the assembly line balancing. The one-way ANOVA method is applied to explore the significant degree of distinguished factors. And regression model is built to find key points. The maximal task time (tmax ), the quantity of tasks (n), and degree of convergence of precedence graph (conv) are critical for the performance of assembly line balancing. The conclusion will do a favor to the lean production in the manufacturing.

Climate-dependence of ecosystem services in a nature reserve in northern China

PubMed Central

Fang, Jiaohui; Song, Huali; Zhang, Yiran; Li, Yanran

2018-01-01

Evaluation of ecosystem services has become a hotspot in terms of research focus, but uncertainties over appropriate methods remain. Evaluation can be based on the unit price of services (services value method) or the unit price of the area (area value method). The former takes meteorological factors into account, while the latter does not. This study uses Kunyu Mountain Nature Reserve as a study site at which to test the effects of climate on the ecosystem services. Measured data and remote sensing imagery processed in a geographic information system were combined to evaluate gas regulation and soil conservation, and the influence of meteorological factors on ecosystem services. Results were used to analyze the appropriateness of the area value method. Our results show that the value of ecosystem services is significantly affected by meteorological factors, especially precipitation. Use of the area value method (which ignores the impacts of meteorological factors) could considerably impede the accuracy of ecosystem services evaluation. Results were also compared with the valuation obtained using the modified equivalent value factor (MEVF) method, which is a modified area value method that considers changes in meteorological conditions. We found that MEVF still underestimates the value of ecosystem services, although it can reflect to some extent the annual variation in meteorological factors. Our findings contribute to increasing the accuracy of evaluation of ecosystem services. PMID:29438427

Climate-dependence of ecosystem services in a nature reserve in northern China.

PubMed

Fang, Jiaohui; Song, Huali; Zhang, Yiran; Li, Yanran; Liu, Jian

2018-01-01

Evaluation of ecosystem services has become a hotspot in terms of research focus, but uncertainties over appropriate methods remain. Evaluation can be based on the unit price of services (services value method) or the unit price of the area (area value method). The former takes meteorological factors into account, while the latter does not. This study uses Kunyu Mountain Nature Reserve as a study site at which to test the effects of climate on the ecosystem services. Measured data and remote sensing imagery processed in a geographic information system were combined to evaluate gas regulation and soil conservation, and the influence of meteorological factors on ecosystem services. Results were used to analyze the appropriateness of the area value method. Our results show that the value of ecosystem services is significantly affected by meteorological factors, especially precipitation. Use of the area value method (which ignores the impacts of meteorological factors) could considerably impede the accuracy of ecosystem services evaluation. Results were also compared with the valuation obtained using the modified equivalent value factor (MEVF) method, which is a modified area value method that considers changes in meteorological conditions. We found that MEVF still underestimates the value of ecosystem services, although it can reflect to some extent the annual variation in meteorological factors. Our findings contribute to increasing the accuracy of evaluation of ecosystem services.

Channel morphology [Chapter 5

Treesearch

Jonathan W. Long; Alvin L. Medina; Daniel G. Neary

2012-01-01

Channel morphology has become an increasingly important subject for analyzing the health of rivers and associated fish populations, particularly since the popularization of channel classification and assessment methods. Morphological data can help to evaluate the flows of sediment and water that influence aquatic and riparian habitat. Channel classification systems,...

Maternal adiposity negatively influences infant brain white matter development

USDA-ARS?s Scientific Manuscript database

Objective: To study potential effects of maternal body composition on central nervous system (CNS) development of newborn infants. Methods: Diffusion tensor imaging was used to evaluate brain white matter development in 2-week-old, full-term, appropriate for gestational age infants from uncomplicat...

Evaluate the contribution of the mixture components on the longevity and performance of FC-5 : [summary].

DOT National Transportation Integrated Search

2014-05-01

At its most basic, an asphalt mixture is asphalt : binder and crushed stone aggregate. This : seemingly simple mixture is very complex; method : of preparation and application, additives, and : aggregate type all influence the quality and : durabilit...

Maize - GO annotation methods, evaluation, and review (Maize-GAMER)

USDA-ARS?s Scientific Manuscript database

Making a genome sequence accessible and useful involves three basic steps: genome assembly, structural annotation, and functional annotation. The quality of data generated at each step influences the accuracy of inferences that can be made, with high-quality analyses produce better datasets resultin...

Perennial plan establishment and productivity can be influenced by previous annual crops

USDA-ARS?s Scientific Manuscript database

Developing efficient, economical methods of perennial mixture establishment is needed for grazing and conservation purposes. Study objectives were to evaluate different perennial monocultures and mixtures planted into spring wheat (Triticum aestivum L.), corn (Zea mays L.), soybean (Glycine max L. ...

Examples of measurement uncertainty evaluations in accordance with the revised GUM

NASA Astrophysics Data System (ADS)

Runje, B.; Horvatic, A.; Alar, V.; Medic, S.; Bosnjakovic, A.

2016-11-01

The paper presents examples of the evaluation of uncertainty components in accordance with the current and revised Guide to the expression of uncertainty in measurement (GUM). In accordance with the proposed revision of the GUM a Bayesian approach was conducted for both type A and type B evaluations.The law of propagation of uncertainty (LPU) and the law of propagation of distribution applied through the Monte Carlo method, (MCM) were used to evaluate associated standard uncertainties, expanded uncertainties and coverage intervals. Furthermore, the influence of the non-Gaussian dominant input quantity and asymmetric distribution of the output quantity y on the evaluation of measurement uncertainty was analyzed. In the case when the probabilistically coverage interval is not symmetric, the coverage interval for the probability P is estimated from the experimental probability density function using the Monte Carlo method. Key highlights of the proposed revision of the GUM were analyzed through a set of examples.

Cryopreservation of spermatozoa from wild-born Namibian cheetahs (Acinonyx jubatus) and influence of glycerol on cryosurvival.

PubMed

Crosier, Adrienne E; Pukazhenthi, Budhan S; Henghali, Josephine N; Howard, Jogayle; Dickman, Amy J; Marker, Laurie; Wildt, David E

2006-04-01

Sperm cryopreservation is a valuable tool for the genetic management of ex situ populations. This study was conducted to assess: (1) semen characteristics of wild-born cheetahs; and (2) the impact of three types of glycerol influence (duration of exposure, temperature, and method of addition) on sperm cryosensitivity. To evaluate the impact of duration of glycerol exposure, spermatozoa were incubated in Test Yolk Buffer (TYB) with 4% glycerol at ambient temperature (approximately 22 degrees C) for 15 vs. 60 min before cryopreservation. To evaluate the influence of temperature and method of glycerol addition, spermatozoa were resuspended at ambient temperature either in TYB with 0% glycerol followed by addition of 8% glycerol (1:1 v/v; at ambient temperature vs. 5 degrees C) or directly in TYB with 4% glycerol. All samples were cryopreserved in straws over liquid nitrogen vapor and evaluated for sperm motility and acrosomal integrity after thawing. Semen samples (n = 23; n = 13 males) contained a high proportion (78%) of pleiomorphic spermatozoa. Ejaculates also contained a high proportion of acrosome-intact (86%) and motile spermatozoa (78%). Immediately after thawing, a significant proportion of spermatozoa retained intact acrosomes (range, 48-67%) and motility (range, 40-49%). After thawing, incubation in glycerol for 60 min at ambient temperature before freezing decreased (p < 0.05) sperm motility and acrosomal integrity at one time-point each (pre-centrifugation and post-centrifugation, respectively). However, method or temperature of glycerol addition had no (p > 0.05) impact on sperm cryosurvival. In summary, (1) wild-born cheetahs produce high proportions of pleiomorphic spermatozoa but with a high proportion of intact acrosomes; and (2) resuspension in 4% glycerol, followed by exposure for up to 60 min at ambient temperature, had minimal effect on sperm motility and acrosomal integrity after cryopreservation. Results indicate the feasibility of cryopreserving cheetah spermatozoa under field conditions, providing a user-friendly method to capture and store gametes to enhance genetic management.

Scientific expertise and the Athlete Biological Passport: 3 years of experience.

PubMed

Schumacher, Yorck Olaf; d'Onofrio, Giuseppe

2012-06-01

Expert evaluation of biological data is a key component of the Athlete Biological Passport approach in the fight against doping. The evaluation consists of a longitudinal assessment of biological variables to determine the probability of the data being physiological on the basis of the athlete's on own previous values (performed by an automated software system using a Bayesian model) and a subjective evaluation of the results in view of possible causes (performed by experts). The role of the expert is therefore a key component in the process. Experts should be qualified to evaluate the data regarding possible explanations related to the influence of doping products and methods, analytical issues, and the influence of exercise or pathological conditions. The evaluation provides a scientific basis for the decision taken by a disciplinary panel. This evaluation should therefore encompass and balance all possible causes for a given blood profile and provide a likelihood for potential scenarios (pathology, normal variation, doping) that might have caused the pattern. It should comply with the standards for the evaluation of scientific evidence in forensics. On the basis of their evaluation of profiles, experts might provide assistance in planning appropriate target testing schemes.

The Context, Process, and Outcome Evaluation Model for Organisational Health Interventions

PubMed Central

Fridrich, Annemarie; Jenny, Gregor J.; Bauer, Georg F.

2015-01-01

To facilitate evaluation of complex, organisational health interventions (OHIs), this paper aims at developing a context, process, and outcome (CPO) evaluation model. It builds on previous model developments in the field and advances them by clearly defining and relating generic evaluation categories for OHIs. Context is defined as the underlying frame that influences and is influenced by an OHI. It is further differentiated into the omnibus and discrete contexts. Process is differentiated into the implementation process, as the time-limited enactment of the original intervention plan, and the change process of individual and collective dynamics triggered by the implementation process. These processes lead to proximate, intermediate, and distal outcomes, as all results of the change process that are meaningful for various stakeholders. Research questions that might guide the evaluation of an OHI according to the CPO categories and a list of concrete themes/indicators and methods/sources applied within the evaluation of an OHI project at a hospital in Switzerland illustrate the model's applicability in structuring evaluations of complex OHIs. In conclusion, the model supplies a common language and a shared mental model for improving communication between researchers and company members and will improve the comparability and aggregation of evaluation study results. PMID:26557665

The Context, Process, and Outcome Evaluation Model for Organisational Health Interventions.

PubMed

Fridrich, Annemarie; Jenny, Gregor J; Bauer, Georg F

2015-01-01

To facilitate evaluation of complex, organisational health interventions (OHIs), this paper aims at developing a context, process, and outcome (CPO) evaluation model. It builds on previous model developments in the field and advances them by clearly defining and relating generic evaluation categories for OHIs. Context is defined as the underlying frame that influences and is influenced by an OHI. It is further differentiated into the omnibus and discrete contexts. Process is differentiated into the implementation process, as the time-limited enactment of the original intervention plan, and the change process of individual and collective dynamics triggered by the implementation process. These processes lead to proximate, intermediate, and distal outcomes, as all results of the change process that are meaningful for various stakeholders. Research questions that might guide the evaluation of an OHI according to the CPO categories and a list of concrete themes/indicators and methods/sources applied within the evaluation of an OHI project at a hospital in Switzerland illustrate the model's applicability in structuring evaluations of complex OHIs. In conclusion, the model supplies a common language and a shared mental model for improving communication between researchers and company members and will improve the comparability and aggregation of evaluation study results.

Impact of parasitic thermal effects on thermoelectric property measurements by Harman method

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kwon, Beomjin, E-mail: bkwon@kist.re.kr; Baek, Seung-Hyub; Keun Kim, Seong

2014-04-15

Harman method is a rapid and simple technique to measure thermoelectric properties. However, its validity has been often questioned due to the over-simplified assumptions that this method relies on. Here, we quantitatively investigate the influence of the previously ignored parasitic thermal effects on the Harman method and develop a method to determine an intrinsic ZT. We expand the original Harman relation with three extra terms: heat losses via both the lead wires and radiation, and Joule heating within the sample. Based on the expanded Harman relation, we use differential measurement of the sample geometry to measure the intrinsic ZT. Tomore » separately evaluate the parasitic terms, the measured ZTs with systematically varied sample geometries and the lead wire types are fitted to the expanded relation. A huge discrepancy (∼28%) of the measured ZTs depending on the measurement configuration is observed. We are able to separately evaluate those parasitic terms. This work will help to evaluate the intrinsic thermoelectric property with Harman method by eliminating ambiguities coming from extrinsic effects.« less

A mixed methods evaluation of the maternal-newborn dashboard in Ontario: dashboard attributes, contextual factors, and facilitators and barriers to use: a study protocol.

PubMed

Dunn, Sandra; Sprague, Ann E; Grimshaw, Jeremy M; Graham, Ian D; Taljaard, Monica; Fell, Deshayne; Peterson, Wendy E; Darling, Elizabeth; Harrold, JoAnn; Smith, Graeme N; Reszel, Jessica; Lanes, Andrea; Truskoski, Carolyn; Wilding, Jodi; Weiss, Deborah; Walker, Mark

2016-05-04

There are wide variations in maternal-newborn care practices and outcomes across Ontario. To help institutions and care providers learn about their own performance, the Better Outcomes Registry & Network (BORN) Ontario has implemented an audit and feedback system, the Maternal-Newborn Dashboard (MND), for all hospitals providing maternal-newborn care. The dashboard provides (1) near real-time feedback, with site-specific and peer comparison data about six key performance indicators; (2) a visual display of evidence-practice gaps related to the indicators; and (3) benchmarks to provide direction for practice change. This study aims to evaluate the effects of the dashboard, dashboard attributes, contextual factors, and facilitation/support needs that influence the use of this audit and feedback system to improve performance. The objectives of this study are to (1) evaluate the effect of implementing the dashboard across Ontario; (2) explore factors that potentially explain differences in the use of the MND among hospitals; (3) measure factors potentially associated with differential effectiveness of the MND; and (4) identify factors that predict differences in hospital performance. A mixed methods design includes (1) an interrupted time series analysis to evaluate the effect of the intervention on six indicators, (2) key informant interviews with a purposeful sample of directors/managers from up to 20 maternal-newborn care hospitals to explore factors that influence the use of the dashboard, (3) a provincial survey of obstetrical directors/managers from all maternal-newborn hospitals in the province to measure factors that influence the use of the dashboard, and (4) a multivariable generalized linear mixed effects regression analysis of the indicators at each hospital to quantitatively evaluate the change in practice following implementation of the dashboard and to identify factors most predictive of use. Study results will provide essential data to develop knowledge translation strategies for facilitating practice change, which can be further evaluated through a future cluster randomized trial.

Evaluating the importance of characterizing soil structure and horizons in parameterizing a hydrologic process model

USGS Publications Warehouse

Mirus, Benjamin B.

2015-01-01

Incorporating the influence of soil structure and horizons into parameterizations of distributed surface water/groundwater models remains a challenge. Often, only a single soil unit is employed, and soil-hydraulic properties are assigned based on textural classification, without evaluating the potential impact of these simplifications. This study uses a distributed physics-based model to assess the influence of soil horizons and structure on effective parameterization. This paper tests the viability of two established and widely used hydrogeologic methods for simulating runoff and variably saturated flow through layered soils: (1) accounting for vertical heterogeneity by combining hydrostratigraphic units with contrasting hydraulic properties into homogeneous, anisotropic units and (2) use of established pedotransfer functions based on soil texture alone to estimate water retention and conductivity, without accounting for the influence of pedon structures and hysteresis. The viability of this latter method for capturing the seasonal transition from runoff-dominated to evapotranspiration-dominated regimes is also tested here. For cases tested here, event-based simulations using simplified vertical heterogeneity did not capture the state-dependent anisotropy and complex combinations of runoff generation mechanisms resulting from permeability contrasts in layered hillslopes with complex topography. Continuous simulations using pedotransfer functions that do not account for the influence of soil structure and hysteresis generally over-predicted runoff, leading to propagation of substantial water balance errors. Analysis suggests that identifying a dominant hydropedological unit provides the most acceptable simplification of subsurface layering and that modified pedotransfer functions with steeper soil-water retention curves might adequately capture the influence of soil structure and hysteresis on hydrologic response in headwater catchments.

Measurement of facial movements with Photoshop software during treatment of facial nerve palsy*

PubMed Central

Pourmomeny, Abbas Ali; Zadmehr, Hassan; Hossaini, Mohsen

2011-01-01

BACKGROUND: Evaluating the function of facial nerve is essential in order to determine the influences of various treatment methods. The aim of this study was to evaluate and assess the agreement of Photoshop scaling system versus the facial grading system (FGS). METHODS: In this semi-experimental study, thirty subjects with facial nerve paralysis were recruited. The evaluation of all patients before and after the treatment was performed by FGS and Photoshop measurements. RESULTS: The mean values of FGS before and after the treatment were 35 ± 25 and 67 ± 24, respectively (p < 0.001). In Photoshop assessment, mean changes of face expressions in the impaired side relative to the normal side in rest position and three main movements of the face were 3.4 ± 0.55 and 4.04 ± 0.49 millimeter before and after the treatment, respectively (p < 0.001). Spearman's correlation coefficient between different values in the two methods was 0.66 (p < 0.001). CONCLUSIONS: Evaluating the facial nerve palsy using Photoshop was more objective than using FGS. Therefore, it may be recommended to use this method instead. PMID:22973325

A novel hybrid MCDM model for performance evaluation of research and technology organizations based on BSC approach.

PubMed

Varmazyar, Mohsen; Dehghanbaghi, Maryam; Afkhami, Mehdi

2016-10-01

Balanced Scorecard (BSC) is a strategic evaluation tool using both financial and non-financial indicators to determine the business performance of organizations or companies. In this paper, a new integrated approach based on the Balanced Scorecard (BSC) and multi-criteria decision making (MCDM) methods are proposed to evaluate the performance of research centers of research and technology organization (RTO) in Iran. Decision-Making Trial and Evaluation Laboratory (DEMATEL) are employed to reflect the interdependencies among BSC perspectives. Then, Analytic Network Process (ANP) is utilized to weight the indices influencing the considered problem. In the next step, we apply four MCDM methods including Additive Ratio Assessment (ARAS), Complex Proportional Assessment (COPRAS), Multi-Objective Optimization by Ratio Analysis (MOORA), and Technique for Order Preference by Similarity to Ideal Solution (TOPSIS) for ranking of alternatives. Finally, the utility interval technique is applied to combine the ranking results of MCDM methods. Weighted utility intervals are computed by constructing a correlation matrix between the ranking methods. A real case is presented to show the efficacy of the proposed approach. Copyright © 2016 Elsevier Ltd. All rights reserved.

Planting pattern and weed control method influence on yield production of corn (Zea mays L.)

NASA Astrophysics Data System (ADS)

Purba, E.; Nasution, D. P.

2018-02-01

Field experiment was carried out to evaluate the influence of planting patterns and weed control methods on the growth and yield of corn. The effect of the planting pattern and weed control method was studied in a split plot design. The main plots were that of planting pattern single row (25cm x 60cm), double row (25cm x 25cm x 60cm) and triangle row ( 25cm x 25cm x 25cm). Subplot was that of weed control method consisted five methods namely weed free throughout the growing season, hand weeding, sprayed with glyphosate, sprayed with paraquat, and no weeding.. Result showed that both planting pattern and weed control method did not affect the growth of corn. However, planting pattern and weed control method significantly affected yield production. Yield resulted from double row and triangle planting pattern was 14% and 41% higher, consecutively, than that of single row pattern. The triangle planting pattern combined with any weed control method produced the highest yield production of corn.

Adaptive optics system performance approximations for atmospheric turbulence correction

NASA Astrophysics Data System (ADS)

Tyson, Robert K.

1990-10-01

Analysis of adaptive optics system behavior often can be reduced to a few approximations and scaling laws. For atmospheric turbulence correction, the deformable mirror (DM) fitting error is most often used to determine a priori the interactuator spacing and the total number of correction zones required. This paper examines the mirror fitting error in terms of its most commonly used exponential form. The explicit constant in the error term is dependent on deformable mirror influence function shape and actuator geometry. The method of least squares fitting of discrete influence functions to the turbulent wavefront is compared to the linear spatial filtering approximation of system performance. It is found that the spatial filtering method overstimates the correctability of the adaptive optics system by a small amount. By evaluating fitting error for a number of DM configurations, actuator geometries, and influence functions, fitting error constants verify some earlier investigations.

Cost-effectiveness Analysis with Influence Diagrams.

PubMed

Arias, M; Díez, F J

2015-01-01

Cost-effectiveness analysis (CEA) is used increasingly in medicine to determine whether the health benefit of an intervention is worth the economic cost. Decision trees, the standard decision modeling technique for non-temporal domains, can only perform CEA for very small problems. To develop a method for CEA in problems involving several dozen variables. We explain how to build influence diagrams (IDs) that explicitly represent cost and effectiveness. We propose an algorithm for evaluating cost-effectiveness IDs directly, i.e., without expanding an equivalent decision tree. The evaluation of an ID returns a set of intervals for the willingness to pay - separated by cost-effectiveness thresholds - and, for each interval, the cost, the effectiveness, and the optimal intervention. The algorithm that evaluates the ID directly is in general much more efficient than the brute-force method, which is in turn more efficient than the expansion of an equivalent decision tree. Using OpenMarkov, an open-source software tool that implements this algorithm, we have been able to perform CEAs on several IDs whose equivalent decision trees contain millions of branches. IDs can perform CEA on large problems that cannot be analyzed with decision trees.

Evaluation of influences of the Viennese Anatomical School on the work of the Croatian Anatomist Jelena Krmpotic-Nemanic.

PubMed

Dinjar, Kristijan; Toth, Jurica; Atalic, Bruno; Radanovic, Danijela; Maric, Svjetlana

2012-01-01

This paper tries to evaluate the connections between the Viennese Anatomical School and the Croatian Anatomist Jelena Krmpotic-Nemanic. 17 papers written by Professor Jelena Krmpotic-Nemanic in the last decade of her life were chosen for analyses. According to their themes they could be divided into three groups: ones which evaluate the anatomical terminology, ones which research the development of anatomical structures, and ones which describe the anatomical variations. Mentioned papers were analysed through their topics, methods of research and cited references. Analyses of the mentioned papers revealed the indirect link between the Viennese Anatomical School and the Professor Jelena Krmpotic-Nemanic, through her mentor Professor Drago Perovic, regarding the themes and the methods of her anatomical researches. It has also showed her preference for Austrian and German anatomical textbooks and atlases, primarily ones published in Vienna and Jena, rather than English and American ones. Finally, her direct connections with the Viennese Institute for the History of Medicine and the Viennese Josephinum Wax Models Museum were emphasized. Mentioned indirect and direct influences of the Viennese Anatomical School on the work of Professor Jelena Krmpotic-Nemanic were critically appraised.

Construction risk assessment of deep foundation pit in metro station based on G-COWA method

NASA Astrophysics Data System (ADS)

You, Weibao; Wang, Jianbo; Zhang, Wei; Liu, Fangmeng; Yang, Diying

2018-05-01

In order to get an accurate understanding of the construction safety of deep foundation pit in metro station and reduce the probability and loss of risk occurrence, a risk assessment method based on G-COWA is proposed. Firstly, relying on the specific engineering examples and the construction characteristics of deep foundation pit, an evaluation index system based on the five factors of “human, management, technology, material and environment” is established. Secondly, the C-OWA operator is introduced to realize the evaluation index empowerment and weaken the negative influence of expert subjective preference. The gray cluster analysis and fuzzy comprehensive evaluation method are combined to construct the construction risk assessment model of deep foundation pit, which can effectively solve the uncertainties. Finally, the model is applied to the actual project of deep foundation pit of Qingdao Metro North Station, determine its construction risk rating is “medium”, evaluate the model is feasible and reasonable. And then corresponding control measures are put forward and useful reference are provided.

Governing patient safety: lessons learned from a mixed methods evaluation of implementing a ward-level medication safety scorecard in two English NHS hospitals

PubMed Central

Ramsay, Angus I G; Turner, Simon; Cavell, Gillian; Oborne, C Alice; Thomas, Rebecca E; Cookson, Graham; Fulop, Naomi J

2014-01-01

Background Relatively little is known about how scorecards presenting performance indicators influence medication safety. We evaluated the effects of implementing a ward-level medication safety scorecard piloted in two English NHS hospitals and factors influencing these. Methods We used a mixed methods, controlled before and after design. At baseline, wards were audited on medication safety indicators; during the ‘feedback’ phase scorecard results were presented to intervention wards on a weekly basis over 7 weeks. We interviewed 49 staff, including clinicians and managers, about scorecard implementation. Results At baseline, 18.7% of patients (total n=630) had incomplete allergy documentation; 53.4% of patients (n=574) experienced a drug omission in the preceding 24 h; 22.5% of omitted doses were classified as ‘critical’; 22.1% of patients (n=482) either had ID wristbands not reflecting their allergy status or no ID wristband; and 45.3% of patients (n=237) had drugs that were either unlabelled or labelled for another patient in their drug lockers. The quantitative analysis found no significant improvement in intervention wards following scorecard feedback. Interviews suggested staff were interested in scorecard feedback and described process and culture changes. Factors influencing scorecard implementation included ‘normalisation’ of errors, study duration, ward leadership, capacity to engage and learning preferences. Discussion Presenting evidence-based performance indicators may potentially influence staff behaviour. Several practical and cultural factors may limit feedback effectiveness and should be considered when developing improvement interventions. Quality scorecards should be designed with care, attending to evidence of indicators’ effectiveness and how indicators and overall scorecard composition fit the intended audience. PMID:24029440

Influence of Type of Frequency Weighting Function On VDV Analysis

NASA Astrophysics Data System (ADS)

Kowalska-Koczwara, Alicja; Stypuła, Krzysztof

2017-10-01

Transport vibrations are the subject of many research, mostly their influence on structural elements of the building is investigated. However, nowadays, especially in the centres of large cities were apartments, residential buildings are closer to the transport vibration sources, an increasing attention is given to providing vibrational comfort to humans in buildings. Currently, in most countries, two main methods of evaluation are used: root mean squared method (RMS) and vibration dose value (VDV). In this article, VDV method is presented and the analysis of the weighting functions selection on value of VDV is made. Measurements required for the analysis were made in Krakow, on masonry, residential, two storey building located in the city centre. The building is subjected into two transport vibration sources: tram passages and vehicle passages on very close located road. Measurement points were located on the basement wall at ground level to control the excitation and in the middle of the floor on the highest storey (in the place where people percept vibration). The room chosen for measurements is located closest to the transport excitation sources. During the measurements, 25 vibration events were recorded and analysed. VDV values were calculated for three different weighting functions according to standard: ISO 2631-1, ISO 2631-2 and BS-6841. Differences in VDV values are shown, but also influence of the weighting function selection on result of evaluation is also presented. VDV analysis was performed not only for the individual vibration event but also all day and night vibration exposure were calculated using formulas contained in the annex to the standard BS-6841. It is demonstrated that, although there are differences in the values of VDV, an influence on all day and night exposure is no longer so significant.

Estimating carbon and nitrogen pools in a forest soil: Influence of soil bulk density methods and rock content

Treesearch

Martin F. Jurgensen; Deborah S. Page-Dumroese; Robert E. Brown; Joanne M. Tirocke; Chris A. Miller; James B. Pickens; Min Wang

2017-01-01

Soils with high rock content are common in many US forests, and contain large amounts of stored C. Accurate measurements of soil bulk density and rock content are critical for calculating and assessing changes in both C and nutrient pool size, but bulk density sampling methods have limitations and sources of variability. Therefore, we evaluated the use of small-...

Development and validation of an ionic chromatography method for the determination of nitrate, nitrite and chloride in meat.

PubMed

Lopez-Moreno, Cristina; Perez, Isabel Viera; Urbano, Ana M

2016-03-01

The purpose of this study is to develop the validation of a method for the analysis of certain preservatives in meat and to obtain a suitable Certified Reference Material (CRM) to achieve this task. The preservatives studied were NO3(-), NO2(-) and Cl(-) as they serve as important antimicrobial agents in meat to inhibit the growth of bacteria spoilage. The meat samples were prepared using a treatment that allowed the production of a known CRM concentration that is highly homogeneous and stable in time. The matrix effects were also studied to evaluate the influence on the analytical signal for the ions of interest, showing that the matrix influence does not affect the final result. An assessment of the signal variation in time was carried out for the ions. In this regard, although the chloride and nitrate signal remained stable for the duration of the study, the nitrite signal decreased appreciably with time. A mathematical treatment of the data gave a stable nitrite signal, obtaining a method suitable for the validation of these anions in meat. A statistical study was needed for the validation of the method, where the precision, accuracy, uncertainty and other mathematical parameters were evaluated obtaining satisfactory results. Copyright © 2015 Elsevier Ltd. All rights reserved.

Evaluation on Collaborative Satisfaction for Project Management Team in Integrated Project Delivery Mode

NASA Astrophysics Data System (ADS)

Zhang, L.; Li, Y.; Wu, Q.

2013-05-01

Integrated Project Delivery (IPD) is a newly-developed project delivery approach for construction projects, and the level of collaboration of project management team is crucial to the success of its implementation. Existing research has shown that collaborative satisfaction is one of the key indicators of team collaboration. By reviewing the literature on team collaborative satisfaction and taking into consideration the characteristics of IPD projects, this paper summarizes the factors that influence collaborative satisfaction of IPD project management team. Based on these factors, this research develops a fuzzy linguistic method to effectively evaluate the level of team collaborative satisfaction, in which the authors adopted the 2-tuple linguistic variables and 2-tuple linguistic hybrid average operators to enhance the objectivity and accuracy of the evaluation. The paper demonstrates the practicality and effectiveness of the method through carrying out a case study with the method.

Physical and sensory quality of Java Arabica green coffee beans

NASA Astrophysics Data System (ADS)

Sunarharum, W. B.; Yuwono, S. S.; Pangestu, N. B. S. W.; Nadhiroh, H.

2018-03-01

Demand on high quality coffee for consumption is continually increasing not only in the consuming countries (importers) but also in the producing countries (exporters). Coffee quality could be affected by several factors from farm to cup including the post-harvest processing methods. This research aimed to investigate the influence of different post-harvest processing methods on physical and sensory quality of Java Arabica green coffee beans. The two factors being evaluated were three different post-harvest processing methods to produce green coffee beans (natural/dry, semi-washed and fully-washed processing) under sun drying. Physical quality evaluation was based on The Indonesian National Standard (SNI 01-2907-2008) while sensory quality was evaluated by five expert judges. The result shows that less defects observed in wet processed coffee as compared to the dry processing. The mechanical drying was also proven to yield a higher quality green coffee beans and minimise losses.

The comparison of predictive scheduling algorithms for different sizes of job shop scheduling problems

NASA Astrophysics Data System (ADS)

Paprocka, I.; Kempa, W. M.; Grabowik, C.; Kalinowski, K.; Krenczyk, D.

2016-08-01

In the paper a survey of predictive and reactive scheduling methods is done in order to evaluate how the ability of prediction of reliability characteristics influences over robustness criteria. The most important reliability characteristics are: Mean Time to Failure, Mean Time of Repair. Survey analysis is done for a job shop scheduling problem. The paper answers the question: what method generates robust schedules in the case of a bottleneck failure occurrence before, at the beginning of planned maintenance actions or after planned maintenance actions? Efficiency of predictive schedules is evaluated using criteria: makespan, total tardiness, flow time, idle time. Efficiency of reactive schedules is evaluated using: solution robustness criterion and quality robustness criterion. This paper is the continuation of the research conducted in the paper [1], where the survey of predictive and reactive scheduling methods is done only for small size scheduling problems.

High-performance liquid chromatography analysis methods developed for quantifying enzymatic esterification of flavonoids in ionic liquids.

PubMed

Lue, Bena-Marie; Guo, Zheng; Xu, Xuebing

2008-07-11

Methods using reversed-phase high-performance liquid chromatography (RP-HPLC) with ELSD were investigated to quantify enzymatic reactions of flavonoids with fatty acids in the presence of diverse room temperature ionic liquids (RTILs). A buffered salt (preferably triethylamine-acetate) was found essential for separation of flavonoids from strongly polar RTILs, whereby RTILs were generally visible as two major peaks identified based on an ion-pairing/exchanging hypothesis. C8 and C12 stationary phases were optimal while mobile phase pH (3-7) had only a minor influence on separation. The method developed was successfully applied for primary screening of RTILs (>20), with in depth evaluation of substrates in 10 RTILs, for their evaluation as reaction media.

Growing the field of health impact assessment in the United States: an agenda for research and practice.

PubMed

Dannenberg, Andrew L; Bhatia, Rajiv; Cole, Brian L; Dora, Carlos; Fielding, Jonathan E; Kraft, Katherine; McClymont-Peace, Diane; Mindell, Jennifer; Onyekere, Chinwe; Roberts, James A; Ross, Catherine L; Rutt, Candace D; Scott-Samuel, Alex; Tilson, Hugh H

2006-02-01

Health impact assessment (HIA) methods are used to evaluate the impact on health of policies and projects in community design, transportation planning, and other areas outside traditional public health concerns. At an October 2004 workshop, domestic and international experts explored issues associated with advancing the use of HIA methods by local health departments, planning commissions, and other decisionmakers in the United States. Workshop participants recommended conducting pilot tests of existing HIA tools, developing a database of health impacts of common projects and policies, developing resources for HIA use, building workforce capacity to conduct HIAs, and evaluating HIAs. HIA methods can influence decisionmakers to adjust policies and projects to maximize benefits and minimize harm to the public's health.

Attributes of innovations and approaches to scalability - lessons from a national program to extend the scope of practice of health professionals.

PubMed

Masso, Malcolm; Thompson, Cristina

2016-01-01

The context for the paper was the evaluation of a national program in Australia to investigate extended scopes of practice for health professionals (paramedics, physiotherapists, and nurses). The design of the evaluation involved a mixed-methods approach with multiple data sources. Four multidisciplinary models of extended scope of practice were tested over an 18-month period, involving 26 organizations, 224 health professionals, and 36 implementation sites. The evaluation focused on what could be learned to inform scaling up the extended scopes of practice on a national scale. The evaluation findings were used to develop a conceptual framework for use by clinicians, managers, and policy makers to determine appropriate strategies for scaling up effective innovations. Development of the framework was informed by the literature on the diffusion of innovations, particularly an understanding that certain attributes of innovations influence adoption. The framework recognizes the role played by three groups of stakeholders: evidence producers, evidence influencers, and evidence adopters. The use of the framework is illustrated with four case studies from the evaluation. The findings demonstrate how the scaling up of innovations can be influenced by three quite distinct approaches - letting adoption take place in an uncontrolled, unplanned, way; actively helping the process of adoption; or taking deliberate steps to ensure that adoption takes place. Development of the conceptual framework resulted in two sets of questions to guide decisions about scalability, one for those considering whether to adopt the innovation (evidence adopters), and the other for those trying to decide on the optimal strategy for dissemination (evidence influencers).

Expert opinions on the acceptance of alternative methods in food safety evaluations: Formulating recommendations to increase acceptance of non-animal methods for kinetics.

PubMed

Punt, Ans; Bouwmeester, Hans; Schiffelers, Marie-Jeanne W A; Peijnenburg, Ad A C M

2018-02-01

Inclusion of alternative methods that replace, reduce, or refine (3R) animal testing within regulatory safety evaluations of chemicals generally faces many hurdles. The goal of the current work is to i) collect responses from key stakeholders involved in food safety evaluations on what they consider the most relevant factors that influence the acceptance and use of 3R methods and to ii) use these responses to formulate activities needed to increase the acceptance and use of 3R methods, particularly for kinetics. The stakeholders were contacted by e-mail for their opinions, asking the respondents to write down three barriers and/or drivers and scoring these by distributing 5 points over the three factors. The main barriers that obtained the highest aggregated scores were i) uncertain predictability 3R methods/lack of validation, ii) insufficient guidance regulators/industry and iii) insufficient harmonization of legislation. The major driver identified was the possibility of 3R methods to provide more mechanistic information. Based on the results, recommendations are given to enhance the acceptance and application of 3R toxicokinetic methods in food safety evaluations. These include steering of regulatory data requirements as well as creating (funding) opportunities for development and validation of alternative methods for kinetics and development of guidances. Copyright © 2017 The Authors. Published by Elsevier Inc. All rights reserved.

The Evaluation of ERP Sandtable Simulation Based on AHP

NASA Astrophysics Data System (ADS)

Xu, Lan

Due to the trend of world globalization, many enterprises have extended their business to operate globally. Enterprise resource planning is a powerful management system providing the best business resources information. This paper proposed the theory of AHP, and presented ERP sandtable simulation evaluation to discuss how to make a decision using AHP. Using this method can make enterprises consider factors influence operation of enterprise adequately, including feedback and dependence among the factors.

Sample size calculation in economic evaluations.

PubMed

Al, M J; van Hout, B A; Michel, B C; Rutten, F F

1998-06-01

A simulation method is presented for sample size calculation in economic evaluations. As input the method requires: the expected difference and variance of costs and effects, their correlation, the significance level (alpha) and the power of the testing method and the maximum acceptable ratio of incremental effectiveness to incremental costs. The method is illustrated with data from two trials. The first compares primary coronary angioplasty with streptokinase in the treatment of acute myocardial infarction, in the second trial, lansoprazole is compared with omeprazole in the treatment of reflux oesophagitis. These case studies show how the various parameters influence the sample size. Given the large number of parameters that have to be specified in advance, the lack of knowledge about costs and their standard deviation, and the difficulty of specifying the maximum acceptable ratio of incremental effectiveness to incremental costs, the conclusion of the study is that from a technical point of view it is possible to perform a sample size calculation for an economic evaluation, but one should wonder how useful it is.

Factors Influencing Worker Morale: Evaluating Provider Demographics, Workplace Environment and Using ESTs

ERIC Educational Resources Information Center

Patterson-Silver Wolf, David A.; Dulmus, Catherine N.; Maguin, Eugene; Cristalli, Maria

2013-01-01

Objectives: Mental health organizations are strongly encouraged to implement empirically supported treatments (ESTs); however, little is known about their working environments. The present study investigated how provider demographics, workplace environment, and whether ESTs were used affected the worker morale. Method: Frontline workers…

Propensity Score Estimation With Boosted Regression for Evaluating Causal Effects in Observational Studies

ERIC Educational Resources Information Center

McCaffrey, Daniel F.; Ridgeway, Greg; Morral, Andrew R.

2004-01-01

Causal effect modeling with naturalistic rather than experimental data is challenging. In observational studies participants in different treatment conditions may also differ on pretreatment characteristics that influence outcomes. Propensity score methods can theoretically eliminate these confounds for all observed covariates, but accurate…

Extreme Response Style: Which Model Is Best?

ERIC Educational Resources Information Center

Leventhal, Brian

2017-01-01

More robust and rigorous psychometric models, such as multidimensional Item Response Theory models, have been advocated for survey applications. However, item responses may be influenced by construct-irrelevant variance factors such as preferences for extreme response options. Through empirical and simulation methods, this study evaluates the use…

Effects of urbanization and stormwater control measures on streamflows in the vicinity of Clarksburg, Maryland, USA

EPA Science Inventory

Understanding the efficacy of revised watershed management methods is important to mitigating the impacts of urbanization on streamflow. We evaluated the influence of land use change, primarily as urbanization, and stormwater control measures on the relationship between precipita...

Contribution of Submarine Groundwater on the Water-Food Nexus in Coastal Ecosystems: Effects on Biodiversity and Fishery Production

NASA Astrophysics Data System (ADS)

Shoji, J.; Sugimoto, R.; Honda, H.; Tominaga, O.; Taniguchi, M.

2014-12-01

In the past decade, machine-learning methods for empirical rainfall-runoff modeling have seen extensive development. However, the majority of research has focused on a small number of methods, such as artificial neural networks, while not considering other approaches for non-parametric regression that have been developed in recent years. These methods may be able to achieve comparable predictive accuracy to ANN's and more easily provide physical insights into the system of interest through evaluation of covariate influence. Additionally, these methods could provide a straightforward, computationally efficient way of evaluating climate change impacts in basins where data to support physical hydrologic models is limited. In this paper, we use multiple regression and machine-learning approaches to predict monthly streamflow in five highly-seasonal rivers in the highlands of Ethiopia. We find that generalized additive models, random forests, and cubist models achieve better predictive accuracy than ANNs in many basins assessed and are also able to outperform physical models developed for the same region. We discuss some challenges that could hinder the use of such models for climate impact assessment, such as biases resulting from model formulation and prediction under extreme climate conditions, and suggest methods for preventing and addressing these challenges. Finally, we demonstrate how predictor variable influence can be assessed to provide insights into the physical functioning of data-sparse watersheds.

Optimisation of a simple and reliable method based on headspace solid-phase microextraction for the determination of volatile phenols in beer.

PubMed

Pizarro, C; Pérez-del-Notario, N; González-Sáiz, J M

2010-09-24

A simple, accurate and sensitive method based on headspace solid-phase microextraction (HS-SPME) coupled to gas chromatography-tandem mass spectrometry (GC-MS/MS) was developed for the analysis of 4-ethylguaiacol, 4-ethylphenol, 4-vinylguaiacol and 4-vinylphenol in beer. The effect of the presence of CO2 in the sample on the extraction of analytes was examined. The influence on extraction efficiency of different fibre coatings, of salt addition and stirring was also evaluated. Divinylbenzene/carboxen/polydimethylsiloxane was selected as extraction fibre and was used to evaluate the influence of exposure time, extraction temperature and sample volume/total volume ratio (Vs/Vt) by means of a central composite design (CCD). The optimal conditions identified were 80 degrees C for extraction temperature, 55 min for extraction time and 6 mL of beer (Vs/Vt 0.30). Under optimal conditions, the proposed method showed satisfactory linearity (correlation coefficients between 0.993 and 0.999), precision (between 6.3% and 9.7%) and detection limits (lower than those previously reported for volatile phenols in beers). The method was applied successfully to the analysis of beer samples. To our knowledge, this is the first time that a HS-SPME based method has been developed to determine simultaneously these four volatile phenols in beers. Copyright 2010 Elsevier B.V. All rights reserved.

A design thinking approach to evaluating interprofessional education.

PubMed

Cahn, Peter S; Bzowyckyj, Andrew; Collins, Lauren; Dow, Alan; Goodell, Kristen; Johnson, Alex F; Klocko, David; Knab, Mary; Parker, Kathryn; Reeves, Scott; Zierler, Brenda K

2016-05-01

The complex challenge of evaluating the impact of interprofessional education (IPE) on patient and community health outcomes is well documented. Recently, at the Radcliffe Institute for Advanced Study in the United States, leaders in health professions education met to help generate a direction for future IPE evaluation research. Participants followed the stages of design thinking, a process for human-centred problem solving, to reach consensus on recommendations. The group concluded that future studies should focus on measuring an intermediate step between learning activities and patient outcomes. Specifically, knowing how IPE-prepared students and preceptors influence the organisational culture of a clinical site as well as how the culture of clinical sites influences learners' attitudes about collaborative practice will demonstrate the value of educational interventions. With a mixed methods approach and an appreciation for context, researchers will be able to identify the factors that foster effective collaborative practice and, by extension, promote patient-centred care.

Impact of adhesive and photoactivation method on sealant integrity and polymer network formation.

PubMed

Borges, Boniek Castillo Dutra; Pereira, Fabrício Lopes da Rocha; Alonso, Roberta Caroline Bruschi; Braz, Rodivan; Montes, Marcos Antônio Japiassú Resende; Pinheiro, Isauremi Vieira de Assunção; Santos, Alex José Souza dos

2012-01-01

We evaluated the influence of photoactivation method and hydrophobic resin (HR) application on the marginal and internal adaptation, hardness (KHN), and crosslink density (CLD) of a resin-based fissure sealant. Model fissures were created in bovine enamel fragments (n = 10) and sealed using one of the following protocols: no adhesive system + photoactivation of the sealant using continuous light (CL), no adhesive system + photoactivation of the sealant using the soft-start method (SS), HR + CL, or HR + SS. Marginal and internal gaps and KHN were assessed after storage in water for 24 h. The CLD was indirectly assessed by repeating the KHN measurement after 24 h of immersion in 100% ethanol. There was no difference among the samples with regard to marginal or internal adaptation. The KHN and CLD were similar for samples cured using either photoactivation method. Use of a hydrophobic resin prior to placement of fissure sealants and curing the sealant using the soft-start method may not provide any positive influence on integrity or crosslink density.

[Evaluation of the AOAC 985.29 enzimic gravimetric method for determination of dietary fiber in oat and corn grains].

PubMed

da Silva, Leila Picolli; Ciocca, Maria de Lourdes Santorio; Furlong, Eliana Badiale

2003-12-01

The precision attributes and use of the enzymatic-gravimetric method of Prosky et al. (1992) (AOAC 985.29) were evaluated using corn (BR 5202 Pampa) and oat (UFRGS 15) samples. The effect of laboratory batches carried out in different days were evaluated in six laboratory batches, using for each material one duplicate for total fiber (FT) determination, one duplicate for insoluble fiber (FI) determination and blank ones for FT and for FI (both in duplicate). In order to characterize repetitive aspects, five other FT and FI determinations added to each sample were evaluated, summing up 11 data. The low coefficients of variation in the first six batches were considered acceptable as an expression of expected total intralaboratory variation. The repetitive of the method was considered good for FT determinations (CVs < 10%). However, in the FI determination a high frequency of negative values of ash and blanks was found, impairing the repetitive aspects evaluation. The magnitude of the total gravimetric corrections varies with the kind of the sample and is especially influenced by the protein content.

Influence of investment, disinfection, and storage on the microhardness of ocular resins.

PubMed

Goiato, Marcelo Coelho; dos Santos, Daniela Micheline; Gennari-Filho, Humberto; Zavanelli, Adriana Cristina; Dekon, Stefan Fiuza de Carvalho; Mancuso, Daniela Nardi

2009-01-01

The longevity of an ocular prosthesis is directly related to the resistance to erosion of its material. The purpose of this study was to evaluate the effects of chemical disinfection and the method of investment on the microhardness of ocular prosthesis acrylic resin. Thirty-two test specimen investments were obtained in two silicones. A segment was cut in each test specimen, and each specimen was fixed in an acrylic disk. The specimens were then polished and submitted to the first microhardness test before immersion in distilled water and incubation for 2 months. During this 2-month period, the specimens were immersed in a water bath at 37 degrees C and were disinfected daily; half were disinfected with neutral soap and the other half were disinfected with 4% chlorhexidine gluconate. After the storage phase and disinfection, a second microhardness test was performed. The surface microhardness values for the acrylic resins were submitted to ANOVA, followed by the Tukey test. The disinfection and the period of storage did not statistically influence the surface microhardness of the acrylic resin, independent of the method of investment of the specimens (Zetalabor or Vipi Sil). The investment of specimens with Zetalabor silicone presented a greater surface hardness, independent of the type of disinfection and the period of storage. Based on these results, we suggest that the microhardness of the resin evaluated was not influenced by the method of disinfection or the time of storage used and was affected only by the investment material.

Evaluation of seatback vibration based on ISO 2631-1 (1997) standard method: The influence of vehicle seat structural resonance.

PubMed

Ittianuwat, R; Fard, M; Kato, K

2017-01-01

Although much research has been done in developing the current ISO 2631-1 (1997) standard method for assessment seat vibration comfort, little consideration has been given to the influence of vehicle seat structural dynamics on comfort assessment. Previous research has shown that there are inconsistencies between standard methods and subjective evaluation of comfort at around vehicle seat twisting resonant frequencies. This study reports the frequency-weighted r.m.s. accelerations in [Formula: see text], [Formula: see text] and [Formula: see text] axes and the total vibration (point vibration total value) at five locations on seatback surface at around vehicle seat twisting resonant frequencies. The results show that the vibration measured at the centre of seatback surface, suggested by current ISO 2631-1 (1997), at around twisting resonant frequencies was the least for all tested vehicle seats. The greatest point vibration total value on the seatback surface varies among vehicle seats. The variations in vibration measured at different locations on seatback surface at around twisting resonant frequencies were sufficiently great that might affect the comfort assessment of vehicle seat.Practitioner Summary: The influence of vehicle seat structural dynamics has not been considered in current ISO 2631-1 (1997). The results of this study show that the vibration measures on seatback surface at around vehicle seat twisting resonant frequency depends on vehicle seats and dominate at the top or the bottom of seatback but not at the centre.

Systematic evaluation of implementation fidelity of complex interventions in health and social care

PubMed Central

2010-01-01

Background Evaluation of an implementation process and its fidelity can give insight into the 'black box' of interventions. However, a lack of standardized methods for studying fidelity and implementation process have been reported, which might be one reason for the fact that few prior studies in the field of health service research have systematically evaluated interventions' implementation processes. The aim of this project is to systematically evaluate implementation fidelity and possible factors influencing fidelity of complex interventions in health and social care. Methods A modified version of The Conceptual Framework for Implementation Fidelity will be used as a conceptual model for the evaluation. The modification implies two additional moderating factors: context and recruitment. A systematic evaluation process was developed. Multiple case study method is used to investigate implementation of three complex health service interventions. Each case will be investigated in depth and longitudinally, using both quantitative and qualitative methods. Discussion This study is the first attempt to empirically test The Conceptual Framework for Implementation Fidelity. The study can highlight mechanism and factors of importance when implementing complex interventions. Especially the role of the moderating factors on implementation fidelity can be clarified. Trial Registration Supported Employment, SE, among people with severe mental illness -- a randomized controlled trial: NCT00960024. PMID:20815872

Researching evaluation influence: a review of the literature.

PubMed

Herbert, James Leslie

2014-10-01

The impact of an evaluation is an important consideration in designing and carrying out evaluations. Evaluation influence is a way of thinking about the effect that an evaluation can have in the broadest possible terms, which its proponents argue will lead to a systematic body of evidence about influential evaluation practices. This literature review sets out to address three research questions: How have researchers defined evaluation influence; how is this reflected in the research; and what does the research suggest about the utility of evaluation influence as a conceptual framework. Drawing on studies that had cited one of the key evaluation influence articles and conducted original research on some aspect of influence this article reviewed the current state of the literature toward the goal of developing a body of evidence about how to practice influential evaluation. Twenty-eight studies were found that have drawn on evaluation influence, which were categorized into (a) descriptive studies, (b) analytical studies, and (c) hypothesis testing. Despite the prominence of evaluation influence in the literature, there is slow progress toward a persuasive body of literature. Many of the studies reviewed offered vague and inconsistent definitions and have applied influence in an unspecified way in the research. It is hoped that this article will stimulate interest in the systematic study of influence mechanisms, leading to improvements in the potential for evaluation to affect positive social change. © The Author(s) 2014.

An adaptive quantum mechanics/molecular mechanics method for the infrared spectrum of water: incorporation of the quantum effect between solute and solvent.

PubMed

Watanabe, Hiroshi C; Banno, Misa; Sakurai, Minoru

2016-03-14

Quantum effects in solute-solvent interactions, such as the many-body effect and the dipole-induced dipole, are known to be critical factors influencing the infrared spectra of species in the liquid phase. For accurate spectrum evaluation, the surrounding solvent molecules, in addition to the solute of interest, should be treated using a quantum mechanical method. However, conventional quantum mechanics/molecular mechanics (QM/MM) methods cannot handle free QM solvent molecules during molecular dynamics (MD) simulation because of the diffusion problem. To deal with this problem, we have previously proposed an adaptive QM/MM "size-consistent multipartitioning (SCMP) method". In the present study, as the first application of the SCMP method, we demonstrate the reproduction of the infrared spectrum of liquid-phase water, and evaluate the quantum effect in comparison with conventional QM/MM simulations.

Experimental and environmental factors affect spurious detection of ecological thresholds

USGS Publications Warehouse

Daily, Jonathan P.; Hitt, Nathaniel P.; Smith, David; Snyder, Craig D.

2012-01-01

Threshold detection methods are increasingly popular for assessing nonlinear responses to environmental change, but their statistical performance remains poorly understood. We simulated linear change in stream benthic macroinvertebrate communities and evaluated the performance of commonly used threshold detection methods based on model fitting (piecewise quantile regression [PQR]), data partitioning (nonparametric change point analysis [NCPA]), and a hybrid approach (significant zero crossings [SiZer]). We demonstrated that false detection of ecological thresholds (type I errors) and inferences on threshold locations are influenced by sample size, rate of linear change, and frequency of observations across the environmental gradient (i.e., sample-environment distribution, SED). However, the relative importance of these factors varied among statistical methods and between inference types. False detection rates were influenced primarily by user-selected parameters for PQR (τ) and SiZer (bandwidth) and secondarily by sample size (for PQR) and SED (for SiZer). In contrast, the location of reported thresholds was influenced primarily by SED. Bootstrapped confidence intervals for NCPA threshold locations revealed strong correspondence to SED. We conclude that the choice of statistical methods for threshold detection should be matched to experimental and environmental constraints to minimize false detection rates and avoid spurious inferences regarding threshold location.

Oral bioaccessibility of semi-volatile organic compounds (SVOCs) in settled dust: A review of measurement methods, data and influencing factors.

PubMed

Raffy, Gaëlle; Mercier, Fabien; Glorennec, Philippe; Mandin, Corinne; Le Bot, Barbara

2018-06-15

Many semi-volatile organic compounds (SVOCs), suspected of reprotoxic, neurotoxic or carcinogenic effects, were measured in indoor settled dust. Dust ingestion is a non-negligible pathway of exposure to some of these SVOCs, and an accurate knowledge of the real exposure is necessary for a better evaluation of health risks. To this end, the bioaccessibility of SVOCs in dust needs to be considered. In the present work, bioaccessibility measurement methods, SVOCs' oral bioaccessibility data and influencing factors were reviewed. SVOC bioaccessibilities (%) ranged from 11 to 94, 8 to 100, 3 to 92, 1 to 81, 6 to 52, and 2 to 17, for brominated flame retardants, organophosphorus flame retardants, polychlorobiphenyls, phthalates, pesticides and polycyclic aromatic hydrocarbons, respectively. Measurements method produced varying results depending on the inclusion of food and/or sink in the model. Characteristics of dust, e.g., organic matter content and particle size, also influenced bioaccessibility data. Last, results were influenced by SVOC properties, such as octanol/water partition coefficient and migration pathway into dust. Factors related to dust and SVOCs could be used in prediction models. To this end, more bioaccessibility studies covering more substances should be performed, using methods that are harmonized and validated by comparison to in-vivo studies. Copyright © 2018 Elsevier B.V. All rights reserved.

Analysis of consumer behavior in decision making of purchasing ornamental freshwater fish (case of study at ornamental freshwater fish market at Peta Street, Bandung)

NASA Astrophysics Data System (ADS)

Gumilar, I.; Rizal, A.; Sriati; Setiawan Putra, R.

2018-04-01

This research aim was to analyzed process of decision making of purchasing ornamental freshwater fish at Peta Street, Bandung City and Analyzed what factors are driving consumers to buy freshwater fish Peta Street. The method used in this research is case study with rating scale and rank spearman analysis. The sampling technique is the accidental random sampling method consist of 30 respondents. The consumer’s decision making process consist of five stages, namely the recognition of needs, information searching, alternative evaluation, process of purchasing, and the evaluation of results. The results showed that at the stage of recognition of needs the motivation of purchasing freshwater fish because respondents are very fond of ornamental freshwater fish, at the stage of information search, the information sources are from the print media and friends or neighborhood. At the stage of alternative evaluation, the reason consumers buy ornamental freshwater fish because the quality of good products. The stage of purchasing decision process consumers bought 1-5 fish with frequency of purchase 1 time per month. The evaluation of results of post-purchasing consumers feel very satisfied with the fish products and the price is very affordable. To observe the factors that influence purchasing motivation of consumers, spearman rank test is the method. The results showed that the quality and price of the product are the factors that most influence the purchase decision of ornamental freshwater fish with the range of student-t value 3,968 and 2,107.

Advanced quantitative magnetic nondestructive evaluation methods - Theory and experiment

NASA Technical Reports Server (NTRS)

Barton, J. R.; Kusenberger, F. N.; Beissner, R. E.; Matzkanin, G. A.

1979-01-01

The paper reviews the scale of fatigue crack phenomena in relation to the size detection capabilities of nondestructive evaluation methods. An assessment of several features of fatigue in relation to the inspection of ball and roller bearings suggested the use of magnetic methods; magnetic domain phenomena including the interaction of domains and inclusions, and the influence of stress and magnetic field on domains are discussed. Experimental results indicate that simplified calculations can be used to predict many features of these results; the data predicted by analytic models which use finite element computer analysis predictions do not agree with respect to certain features. Experimental analyses obtained on rod-type fatigue specimens which show experimental magnetic measurements in relation to the crack opening displacement and volume and crack depth should provide methods for improved crack characterization in relation to fracture mechanics and life prediction.

A new method to evaluate image quality of CBCT images quantitatively without observers

PubMed Central

Shimizu, Mayumi; Okamura, Kazutoshi; Yoshida, Shoko; Weerawanich, Warangkana; Tokumori, Kenji; Jasa, Gainer R; Yoshiura, Kazunori

2017-01-01

Objectives: To develop an observer-free method for quantitatively evaluating the image quality of CBCT images by applying just-noticeable difference (JND). Methods: We used two test objects: (1) a Teflon (polytetrafluoroethylene) plate phantom attached to a dry human mandible; and (2) a block phantom consisting of a Teflon step phantom and an aluminium step phantom. These phantoms had holes with different depths. They were immersed in water and scanned with a CB MercuRay (Hitachi Medical Corporation, Tokyo, Japan) at tube voltages of 120 kV, 100 kV, 80 kV and 60 kV. Superimposed images of the phantoms with holes were used for evaluation. The number of detectable holes was used as an index of image quality. In detecting holes quantitatively, the threshold grey value (ΔG), which differentiated holes from the background, was calculated using a specific threshold (the JND), and we extracted the holes with grey values above ΔG. The indices obtained by this quantitative method (the extracted hole values) were compared with the observer evaluations (the observed hole values). In addition, the contrast-to-noise ratio (CNR) of the shallowest detectable holes and the deepest undetectable holes were measured to evaluate the contribution of CNR to detectability. Results: The results of this evaluation method corresponded almost exactly with the evaluations made by observers. The extracted hole values reflected the influence of different tube voltages. All extracted holes had an area with a CNR of ≥1.5. Conclusions: This quantitative method of evaluating CBCT image quality may be more useful and less time-consuming than evaluation by observation. PMID:28045343

Atmospheric correction for inland water based on Gordon model

NASA Astrophysics Data System (ADS)

Li, Yunmei; Wang, Haijun; Huang, Jiazhu

2008-04-01

Remote sensing technique is soundly used in water quality monitoring since it can receive area radiation information at the same time. But more than 80% radiance detected by sensors at the top of the atmosphere is contributed by atmosphere not directly by water body. Water radiance information is seriously confused by atmospheric molecular and aerosol scattering and absorption. A slight bias of evaluation for atmospheric influence can deduce large error for water quality evaluation. To inverse water composition accurately we have to separate water and air information firstly. In this paper, we studied on atmospheric correction methods for inland water such as Taihu Lake. Landsat-5 TM image was corrected based on Gordon atmospheric correction model. And two kinds of data were used to calculate Raleigh scattering, aerosol scattering and radiative transmission above Taihu Lake. Meanwhile, the influence of ozone and white cap were revised. One kind of data was synchronization meteorology data, and the other one was synchronization MODIS image. At last, remote sensing reflectance was retrieved from the TM image. The effect of different methods was analyzed using in situ measured water surface spectra. The result indicates that measured and estimated remote sensing reflectance were close for both methods. Compared to the method of using MODIS image, the method of using synchronization meteorology is more accurate. And the bias is close to inland water error criterion accepted by water quality inversing. It shows that this method is suitable for Taihu Lake atmospheric correction for TM image.

Development and validity of a method for the evaluation of printed education material

PubMed Central

Castro, Mauro Silveira; Pilger, Diogo; Fuchs, Flávio Danni; Ferreira, Maria Beatriz Cardoso

Objectives To develop and study the validity of an instrument for evaluation of Printed Education Materials (PEM); to evaluate the use of acceptability indices; to identify possible influences of professional aspects. Methods An instrument for PEM evaluation was developed which included tree steps: domain identification, item generation and instrument design. A reading to easy PEM was developed for education of patient with systemic hypertension and its treatment with hydrochlorothiazide. Construct validity was measured based on previously established errors purposively introduced into the PEM, which served as extreme groups. An acceptability index was applied taking into account the rate of professionals who should approve each item. Participants were 10 physicians (9 men) and 5 nurses (all women). Results Many professionals identified intentional errors of crude character. Few participants identified errors that needed more careful evaluation, and no one detected the intentional error that required literature analysis. Physicians considered as acceptable 95.8% of the items of the PEM, and nurses 29.2%. The differences between the scoring were statistically significant in 27% of the items. In the overall evaluation, 66.6% were considered as acceptable. The analysis of each item revealed a behavioral pattern for each professional group. Conclusions The use of instruments for evaluation of printed education materials is required and may improve the quality of the PEM available for the patients. Not always are the acceptability indices totally correct or represent high quality of information. The professional experience, the practice pattern, and perhaps the gendre of the reviewers may influence their evaluation. An analysis of the PEM by professionals in communication, in drug information, and patients should be carried out to improve the quality of the proposed material. PMID:25214924

RM-DEMATEL: a new methodology to identify the key factors in PM2.5.

PubMed

Chen, Yafeng; Liu, Jie; Li, Yunpeng; Sadiq, Rehan; Deng, Yong

2015-04-01

Weather system is a relative complex dynamic system, the factors of the system are mutually influenced PM2.5 concentration. In this paper, a new method is proposed to quantify the influence on PM2.5 by other factors in the weather system and identify the most important factors for PM2.5 with limited resources. The relation map (RM) is used to figure out the direct relation matrix of 14 factors in PM2.5. The decision making trial and evaluation laboratory(DEMATEL) is applied to calculate the causal relationship and extent to a mutual influence of 14 factors in PM2.5. According to the ranking results of our proposed method, the most important key factors is sulfur dioxide (SO2) and nitrogen oxides (NO(X)). In addition, the other factors, the ambient maximum temperature (T(max)), concentration of PM10, and wind direction (W(dir)), are important factors for PM2.5. The proposed method can also be applied to other environment management systems to identify key factors.

A Comparison of Various MRA Methods Applied to Longitudinal Evaluation Studies in Vocational Education.

ERIC Educational Resources Information Center

Kapes, Jerome T.; And Others

Three models of multiple regression analysis (MRA): single equation, commonality analysis, and path analysis, were applied to longitudinal data from the Pennsylvania Vocational Development Study. Variables influencing weekly income of vocational education students one year after high school graduation were examined: grade point averages (grades…

Non-composted municipal solid waste byproduct influences soil and plant nutrients five years after soil reclamation

USDA-ARS?s Scientific Manuscript database

Concerns for the mounting supply of municipal solid waste being generated combined with decreasing landfill space have compelled military installations to evaluate alternative methods for disposal. One approach to reduce landfilling is the use of a new garbage-processing technology that sterilizes a...

MACRO- MICRO-PURGE SOIL GAS SAMPLING METHODS FOR THE COLLECTION OF CONTAMINANT VAPORS

EPA Science Inventory

Purging influence on soil gas concentrations for volatile organic compounds (VOCs), as affected by sampling tube inner diameter and sampling depth (i.e., dead-space purge volume), was evaluated at different field sites. A macro-purge sampling system consisted of a standard hollo...

Improved shelf life of dried Beauveria bassiana blastospores using convective drying and active packaging processes

USDA-ARS?s Scientific Manuscript database

The yeast form (blastospore) of the dimorphic insect-pathogenic fungus Beauveria bassiana can be rapidly produced using liquid fermentation methods but is generally unable to survive rapid dehydration processes or storage under non-refrigerated conditions. In this study, we evaluated the influence o...

AN APPROACH TO ASSESSING THE CONDITION OF RIPARIAN PLANT COMMUNITIES IN THE JOHN DAY AND DESCHUTES RIVER BASINS OF EASTERN OREGON

EPA Science Inventory

Riparian vegetation represents unique plant communities and provides a variety of ecosystem services that influence in-stream condition. This research develops methods and indicators for evaluating vegetation condition. A key indicator of riparian vegetation condition is the deg...

Green Tea Catechin Consumption Enhances Exercise-Induced Abdominal Fat Loss

USDA-ARS?s Scientific Manuscript database

Aim: This study evaluated the influence of a green tea catechin beverage on body composition and fat distribution in overweight and obese adults during exercised-induced weight loss. Methods: Participants (N=132) were randomly assigned to receive a 500 mL beverage containing approximately 625 mg of...

Influences of Tone on Vowel Articulation in Mandarin Chinese

ERIC Educational Resources Information Center

Shaw, Jason A.; Chen, Wei-rong; Proctor, Michael I.; Derrick, Donald

2016-01-01

Purpose: Models of speech production often abstract away from shared physiology in pitch control and lingual articulation, positing independent control of tone and vowel units. We assess the validity of this assumption in Mandarin Chinese by evaluating the stability of lingual articulation for vowels across variation in tone. Method:…

EVALUATION OF EXPOSURE MEASUREMENT METHODS AND APPROACHES FOR THE NATIONAL CHILDREN'S STUDY

EPA Science Inventory

The National Children's Study (NCS) will examine the effects of environmental influences on the health and development of children in the United States. The study is being planned as a large, long-term effort that will explore a broad range of environmental factors, both helpful...

Estimating raindrop kinetic energy: evaluation of a low-cost method

USDA-ARS?s Scientific Manuscript database

The Loess Plateau of China is regarded as the most intensively eroded region in the world and soil erosion caused by raindrop action is a common occurrence on agricultural land within this region. Therefore, understanding the influence of rainfall energy on the soil surface is needed for modeling pu...

Motivational Signage Increases Physical Activity on a College Campus

ERIC Educational Resources Information Center

Ford, M. Allison; Torok, Donald

2008-01-01

Objective: The authors evaluated whether motivational signage influenced rates of stair use relative to elevator use on a college campus. Participants: In March and April 2004, the authors observed students, faculty, staff, and any visitors accessing a college campus building. Methods: During Phase I, the authors monitored ascending stair and…

Using Teacher Effectiveness Data for Information-Rich Hiring

ERIC Educational Resources Information Center

Cannata, Marisa; Rubin, Mollie; Goldring, Ellen; Grissom, Jason A.; Neumerski, Christine M.; Drake, Timothy A.; Schuermann, Patrick

2017-01-01

Purpose: New teacher effectiveness measures have the potential to influence how principals hire teachers as they provide new and richer information about candidates to a traditionally information-poor process. This article examines how the hiring process is changing as a result of teacher evaluation reforms. Research Methods: Data come from…

Are Working Memory Measures Free of Socioeconomic Influence?

ERIC Educational Resources Information Center

Engel, Pascale Marguerite Josiane; Santos, Flavia Heloisa; Gathercole, Susan Elizabeth

2008-01-01

Purpose: This study evaluated the impact of socioeconomic factors on children's performance on tests of working memory and vocabulary. Method: Twenty Brazilian children, aged 6 and 7 years, from low-income families, completed tests of working memory (verbal short-term memory and verbal complex span) and vocabulary (expressive and receptive). A…

DIESEL EXHAUST PARTICLE COMPOSITION AND THE METHOD OF SONICATION INFLUENCE THE ADJUVANCY EFFECT AND TARC PRODUCTION

EPA Science Inventory

Numerous reports have shown diesel exhaust particles (DEP) can act as an immunological adjuvant in asthma. Recent interest has focused on thymus and activation-regulated chemokine (TARC) as an important modulator of this effect. This study evaluated the adjuvancy effects of thr...

Monitoring environmental change with color slides

Treesearch

Arthur W. Magill

1989-01-01

Monitoring human impact on outdoor recreation sites and view landscapes is necessary to evaluate influences which may require corrective action and to determine if management is achieving desired goals. An inexpensive method to monitor environmental change is to establish camera points and use repeat color slides. Successful monitoring from slides requires the observer...

Exploration of Action Figure Appeals Using Evaluation Grid Method and Quantification Theory Type I

ERIC Educational Resources Information Center

Chang, Hua-Cheng; Chen, Hung-Yuan

2017-01-01

Contemporary toy is characterized by accelerating social, cultural and technological change. An attractive action figure can grab consumers' attention, influence the latent consuming preference and evoke their pleasure. However, traditional design of action figure is always dependent on designer's opinion, subjective experience and preference. It…

Disability Insurance Beneficiaries with Visual Impairments in Vocational Rehabilitation: Socio-Demographic Influences on Employment

ERIC Educational Resources Information Center

Giesen, J. Martin; Cavenaugh, Brenda S.

2013-01-01

Introduction: Given mutual concerns of vocational rehabilitation and the Social Security Administration, our purpose was to evaluate the effect of current individual and economic factors on competitive employment for Social Security Disability Insurance (SSDI) beneficiaries with visual impairments in vocational rehabilitation. Methods: Using…

Systems of Career Influences: A Conceptual Model for Evaluating the Professional Development of Women in Academic Medicine

PubMed Central

Helitzer, Deborah; Morahan, Page; Chang, Shine; Gleason, Katharine; Cardinali, Gina; Wu, Chih-Chieh

2012-01-01

Abstract Background Surprisingly little research is available to explain the well-documented organizational and societal influences on persistent inequities in advancement of women faculty. Methods The Systems of Career Influences Model is a framework for exploring factors influencing women's progression to advanced academic rank, executive positions, and informal leadership roles in academic medicine. The model situates faculty as agents within a complex adaptive system consisting of a trajectory of career advancement with opportunities for formal professional development programming; a dynamic system of influences of organizational policies, practices, and culture; and a dynamic system of individual choices and decisions. These systems of influence may promote or inhibit career advancement. Within this system, women weigh competing influences to make career advancement decisions, and leaders of academic health centers prioritize limited resources to support the school's mission. Results and Conclusions The Systems of Career Influences Model proved useful to identify key research questions. We used the model to probe how research in academic career development might be applied to content and methods of formal professional development programs. We generated a series of questions and hypotheses about how professional development programs might influence professional development of health science faculty members. Using the model as a guide, we developed a study using a quantitative and qualitative design. These analyses should provide insight into what works in recruiting and supporting productive men and women faculty in academic medical centers. PMID:23101486

Effect of different cooking methods on total phenolic contents and antioxidant activities of four Boletus mushrooms.

PubMed

Sun, Liping; Bai, Xue; Zhuang, Yongliang

2014-11-01

The influences of cooking methods (steaming, pressure-cooking, microwaving, frying and boiling) on total phenolic contents and antioxidant activities of fruit body of Boletus mushrooms (B. aereus, B. badius, B. pinophilus and B. edulis) have been evaluated. The results showed that microwaving was better in retention of total phenolics than other cooking methods, while boiling significantly decreased the contents of total phenolics in samples under study. Effects of different cooking methods on phenolic acids profiles of Boletus mushrooms showed varieties with both the species of mushroom and the cooking method. Effects of cooking treatments on antioxidant activities of Boletus mushrooms were evaluated by in vitro assays of hydroxyl radical (OH·) -scavenging activity, reducing power and 1, 1-diphenyl-2-picrylhydrazyl radicals (DPPH·) -scavenging activity. Results indicated the changes of antioxidant activities of four Boletus mushrooms were different in five cooking methods. This study could provide some information to encourage food industry to recommend particular cooking methods.

Survey of Methods to Assess Workload

DTIC Science & Technology

1979-08-01

thesis study which had to do with the effect of binaural beats upon performan:.e (2) found out there was a subjectively experienced quality of beats ...were forced to conclude that the neuralmechanism by which binaural beats influenced performance is not open to correct subjective evaluation. In terms of...methods for developing indicies of pilot workload, FAA Report (FAA-AN-77- 15), July 1977. 2. ,’ R. E. The effect of binaural beats on performance, J

Manufacturing Methods and Technology Program Automatic In-Process Microcircuit Evaluation.

DTIC Science & Technology

1980-10-01

methods of controlling the AIME system are with the computer and associated inter- face (CPU control), and with controls located on the front panels...Sync and Blanking signals When the AIME system is being operated by the front panel controls , the computer does not influence the system operation. SU...the color video monitor display. The operator controls these parameters by 1) depressing the appropriate key on the keyboard, 2) observing on the

Assessment of extracellular dehydration using saliva osmolality.

PubMed

Ely, Brett R; Cheuvront, Samuel N; Kenefick, Robert W; Spitz, Marissa G; Heavens, Kristen R; Walsh, Neil P; Sawka, Michael N

2014-01-01

When substantial solute losses accompany body water an isotonic hypovolemia (extracellular dehydration) results. The potential for using blood or urine to assess extracellular dehydration is generally poor, but saliva is not a simple ultra-filtrate of plasma and the autonomic regulation of salivary gland function suggests the possibility that saliva osmolality (Sosm) may afford detection of extracellular dehydration via the influence of volume-mediated factors. This study aimed to evaluate the assessment of extracellular dehydration using Sosm. In addition, two common saliva collection methods and their effects on Sosm were compared. Blood, urine, and saliva samples were collected in 24 healthy volunteers during paired euhydration and dehydration trials. Furosemide administration and 12 h fluid restriction were used to produce extracellular dehydration. Expectoration and salivette collection methods were compared in a separate group of eight euhydrated volunteers. All comparisons were made using paired t-tests. The diagnostic potential of body fluids was additionally evaluated. Dehydration (3.1 ± 0.5% loss of body mass) decreased PV (-0.49 ± 0.12 L; -15.12 ± 3.94% change), but Sosm changes were marginal (<10 mmol/kg) and weakly correlated with changes in absolute or relative PV losses. Overall diagnostic accuracy was poor (AUC = 0.77-0.78) for all body fluids evaluated. Strong agreement was observed between Sosm methods (Expectoration: 61 ± 10 mmol/kg, Salivette: 61 ± 8 mmol/kg, p > 0.05). Extracelluar dehydration was not detectable using plasma, urine, or saliva measures. Salivette and expectoration sampling methods produced similar, consistent results for Sosm, suggesting no methodological influence on Sosm.

The influence of local pressure on evaluation parameters of skin blood perfusion and fluorescence

NASA Astrophysics Data System (ADS)

Zherebtsov, E. A.; Kandurova, K. Y.; Seryogina, E. S.; Kozlov, I. O.; Dremin, V. V.; Zherebtsova, A. I.; Dunaev, A. V.; Meglinski, I.

2017-03-01

This article presents the results of the study of the pressure applied on optical diagnostic probes as a significant factor affecting the results of measurements. During stepwise increasing and decreasing of local pressure on skin we conducted measurements using the methods of laser Doppler flowmetry and fluorescence spectroscopy. It was found out that pressure on optical probe has sufficient impact on skin microcirculation to affect registered fluorescence intensity. Data obtained in this study are of interest for design and development of diagnostic technologies for wearable devices. This data will also inform further investigation into issues of compensation of blood absorption influence on fluorescence spectrum, allowing increased accuracy and reproducibility of measurements by fluorescence spectroscopy methods in optical diagnosis.

Extension of an assessment model of ship traffic exhaust emissions for particulate matter and carbon monoxide

NASA Astrophysics Data System (ADS)

Jalkanen, J.-P.; Johansson, L.; Kukkonen, J.; Brink, A.; Kalli, J.; Stipa, T.

2011-08-01

A method is presented for the evaluation of the exhaust emissions of marine traffic, based on the messages provided by the Automatic Identification System (AIS), which enable the positioning of ship emissions with a high spatial resolution (typically a few metres). The model also takes into account the detailed technical data of each individual vessel. The previously developed model was applicable for evaluating the emissions of NOx, SOx and CO2. This paper addresses a substantial extension of the modelling system, to allow also for the mass-based emissions of particulate matter (PM) and carbon monoxide (CO). The presented Ship Traffic Emissions Assessment Model (STEAM2) allows for the influences of accurate travel routes and ship speed, engine load, fuel sulphur content, multiengine setups, abatement methods and waves. We address in particular the modeling of the influence on the emissions of both engine load and the sulphur content of the fuel. The presented methodology can be used to evaluate the total PM emissions, and those of organic carbon, elemental carbon, ash and hydrated sulphate. We have evaluated the performance of the extended model against available experimental data on engine power, fuel consumption and the composition-resolved emissions of PM. As example results, the geographical distributions of the emissions of PM and CO are presented for the marine regions surrounding the Danish Straits.

Accelerated aging studies of UHMWPE. I. Effect of resin, processing, and radiation environment on resistance to mechanical degradation.

PubMed

Edidin, A A; Herr, M P; Villarraga, M L; Muth, J; Yau, S S; Kurtz, S M

2002-08-01

The resin and processing route have been identified as potential variables influencing the mechanical behavior, and hence the clinical performance, of ultra-high molecular weight polyethylene (UHMWPE) orthopedic components. Researchers have reported that components fabricated from 1900 resin may oxidize to a lesser extent than components fabricated from GUR resin during shelf aging after gamma sterilization in air. Conflicting reports on the oxidation resistance for 1900 raise the question of whether resin or manufacturing method, or an interaction between resin and manufacturing method, influences the mechanical behavior of UHMWPE. We conducted a series of accelerated aging studies (no aging, aging in oxygen or in nitrogen) to systematically examine the influence of resin (GUR or 1900), manufacturing method (bulk compression molding or extrusion), and sterilization method (none, in air, or in nitrogen) on the mechanical behavior of UHMWPE. The small punch testing technique was used to evaluate the mechanical behavior of the materials, and Fourier transform infrared spectroscopy was used to characterize the oxidation in selected samples. Our study showed that the sterilization environment, aging condition, and specimen location (surface or subsurface) significantly affected the mechanical behavior of UHMWPE. Each of the three polyethylenes evaluated seem to degrade according to a similar pathway after artificial aging in oxygen and gamma irradiation in air. The initial ability of the materials to exhibit post-yield strain hardening was significantly compromised by degradation. In general, there were only minor differences in the aging behavior of molded and extruded GUR 1050, whereas the molded 1900 material seemed to degrade slightly faster than either of the 1050 materials. Copyright 2002 Wiley Periodicals, Inc.

Contrast-enhanced 3T MR Perfusion of Musculoskeletal Tumours: T1 Value Heterogeneity Assessment and Evaluation of the Influence of T1 Estimation Methods on Quantitative Parameters.

PubMed

Gondim Teixeira, Pedro Augusto; Leplat, Christophe; Chen, Bailiang; De Verbizier, Jacques; Beaumont, Marine; Badr, Sammy; Cotten, Anne; Blum, Alain

2017-12-01

To evaluate intra-tumour and striated muscle T1 value heterogeneity and the influence of different methods of T1 estimation on the variability of quantitative perfusion parameters. Eighty-two patients with a histologically confirmed musculoskeletal tumour were prospectively included in this study and, with ethics committee approval, underwent contrast-enhanced MR perfusion and T1 mapping. T1 value variations in viable tumour areas and in normal-appearing striated muscle were assessed. In 20 cases, normal muscle perfusion parameters were calculated using three different methods: signal based and gadolinium concentration based on fixed and variable T1 values. Tumour and normal muscle T1 values were significantly different (p = 0.0008). T1 value heterogeneity was higher in tumours than in normal muscle (variation of 19.8% versus 13%). The T1 estimation method had a considerable influence on the variability of perfusion parameters. Fixed T1 values yielded higher coefficients of variation than variable T1 values (mean 109.6 ± 41.8% and 58.3 ± 14.1% respectively). Area under the curve was the least variable parameter (36%). T1 values in musculoskeletal tumours are significantly different and more heterogeneous than normal muscle. Patient-specific T1 estimation is needed for direct inter-patient comparison of perfusion parameters. • T1 value variation in musculoskeletal tumours is considerable. • T1 values in muscle and tumours are significantly different. • Patient-specific T1 estimation is needed for comparison of inter-patient perfusion parameters. • Technical variation is higher in permeability than semiquantitative perfusion parameters.

Observational uncertainty and regional climate model evaluation: A pan-European perspective

NASA Astrophysics Data System (ADS)

Kotlarski, Sven; Szabó, Péter; Herrera, Sixto; Räty, Olle; Keuler, Klaus; Soares, Pedro M.; Cardoso, Rita M.; Bosshard, Thomas; Pagé, Christian; Boberg, Fredrik; Gutiérrez, José M.; Jaczewski, Adam; Kreienkamp, Frank; Liniger, Mark. A.; Lussana, Cristian; Szepszo, Gabriella

2017-04-01

Local and regional climate change assessments based on downscaling methods crucially depend on the existence of accurate and reliable observational reference data. In dynamical downscaling via regional climate models (RCMs) observational data can influence model development itself and, later on, model evaluation, parameter calibration and added value assessment. In empirical-statistical downscaling, observations serve as predictand data and directly influence model calibration with corresponding effects on downscaled climate change projections. Focusing on the evaluation of RCMs, we here analyze the influence of uncertainties in observational reference data on evaluation results in a well-defined performance assessment framework and on a European scale. For this purpose we employ three different gridded observational reference grids, namely (1) the well-established EOBS dataset (2) the recently developed EURO4M-MESAN regional re-analysis, and (3) several national high-resolution and quality-controlled gridded datasets that recently became available. In terms of climate models five reanalysis-driven experiments carried out by five different RCMs within the EURO-CORDEX framework are used. Two variables (temperature and precipitation) and a range of evaluation metrics that reflect different aspects of RCM performance are considered. We furthermore include an illustrative model ranking exercise and relate observational spread to RCM spread. The results obtained indicate a varying influence of observational uncertainty on model evaluation depending on the variable, the season, the region and the specific performance metric considered. Over most parts of the continent, the influence of the choice of the reference dataset for temperature is rather small for seasonal mean values and inter-annual variability. Here, model uncertainty (as measured by the spread between the five RCM simulations considered) is typically much larger than reference data uncertainty. For parameters of the daily temperature distribution and for the spatial pattern correlation, however, important dependencies on the reference dataset can arise. The related evaluation uncertainties can be as large or even larger than model uncertainty. For precipitation the influence of observational uncertainty is, in general, larger than for temperature. It often dominates model uncertainty especially for the evaluation of the wet day frequency, the spatial correlation and the shape and location of the distribution of daily values. But even the evaluation of large-scale seasonal mean values can be considerably affected by the choice of the reference. When employing a simple and illustrative model ranking scheme on these results it is found that RCM ranking in many cases depends on the reference dataset employed.

An analysis of region-of-influence methods for flood regionalization in the Gulf-Atlantic Rolling Plains

USGS Publications Warehouse

Eng, K.; Tasker, Gary D.; Milly, P.C.D.

2005-01-01

Region-of-influence (RoI) approaches for estimating streamflow characteristics at ungaged sites were applied and evaluated in a case study of the 50-year peak discharge in the Gulf-Atlantic Rolling Plains of the southeastern United States. Linear regression against basin characteristics was performed for each ungaged site considered based on data from a region of influence containing the n closest gages in predictor variable (PRoI) or geographic (GRoI) space. Augmentation of this count based cutoff by a distance based cutoff also was considered. Prediction errors were evaluated for an independent (split-sampled) dataset. For the dataset and metrics considered here: (1) for either PRoI or GRoI, optimal results were found when the simpler count based cutoff, rather than the distance augmented cutoff, was used; (2) GRoI produced lower error than PRoI when applied indiscriminately over the entire study region; (3) PRoI performance improved considerably when RoI was restricted to predefined geographic subregions.

Mathematical evaluation of the influence of multiple factors on implant stability quotient values in clinical practice: a retrospective study

PubMed Central

Huang, Hairong; Wismeijer, Daniel; Shao, Xianhong; Wu, Gang

2016-01-01

Objectives The objective of this study is to mathematically evaluate the influence of multiple factors on implant stability quotient values in clinical practice. Patients and methods Resonance frequency analysis was performed at T1 (measured immediately at the time of implant placement) and at T2 (measured before dental restoration) in 177 patients (329 implants). Using a multivariate linear regression model, we analyzed the influence of the following eleven candidate factors: sex, age, maxillary/mandibular location, bone type, immediate/delayed implantation, bone grafting (presence or absence), insertion torque, I-/II-stage healing pattern, implant diameter, implant length, and T1–T2 time interval. Results The following factors were identified to significantly influence the implant stability quotient (ISQ) values at T1: insertion torque, bone grafting, I-/II-stage healing pattern, immediate/delayed implantation, maxillary/mandibular location, implant diameter, and sex. In contrast, the ISQ values at T2 were significantly influenced only by three factors: implant diameter, T1–T2 time interval, and insertion torque. Conclusion Among the eleven candidate factors, seven key factors were found to influence the T1-ISQ values, while only three key factors influenced the T2-ISQ values. Both T1 and T2-ISQ values were found to be influenced by implant diameter and insertion torque. T1 was influenced specifically by the sex of the patient, the location (maxillary or mandibular), the implantation mode (immediate/delayed implantation), the healing stage, and the absence or presence of bone graft materials. PMID:27785040

Time-resolved photoacoustic measurement for evaluation of viscoelastic properties of biological tissues

NASA Astrophysics Data System (ADS)

Zhao, Yue; Chen, Conggui; Liu, Hongwei; Yang, Sihua; Xing, Da

2016-11-01

In this letter, we proposed a method for viscoelastic characterization of biological tissues based on time-resolved photoacoustic measurement. The theoretical and experimental study was performed on the influence of viscoelasticity effects on photoacoustic generation. Taking the time delay between the photoacoustic signal and the exciting laser, the viscoelasticity distribution of biological tissues can be mapped. To validate our method, gelatin phantoms with different densities were measured. We also applied this method in discrimination between fat and liver to confirm the usefulness of the viscoelastic evaluation. Furthermore, pilot experiments were performed on atherosclerosis artery from an apolipoprotein E-knockout mouse to show the viscoelastic characterization of atherosclerotic plaque. Our results demonstrate that this technique has the potential for visualizing the biomechanical properties and lesions of biological tissues.

Growing the Field of Health Impact Assessment in the United States: An Agenda for Research and Practice

PubMed Central

Dannenberg, Andrew L.; Bhatia, Rajiv; Cole, Brian L.; Dora, Carlos; Fielding, Jonathan E.; Kraft, Katherine; McClymont-Peace, Diane; Mindell, Jennifer; Onyekere, Chinwe; Roberts, James A.; Ross, Catherine L.; Rutt, Candace D.; Scott-Samuel, Alex; Tilson, Hugh H.

2006-01-01

Health impact assessment (HIA) methods are used to evaluate the impact on health of policies and projects in community design, transportation planning, and other areas outside traditional public health concerns. At an October 2004 workshop, domestic and international experts explored issues associated with advancing the use of HIA methods by local health departments, planning commissions, and other decisionmakers in the United States. Workshop participants recommended conducting pilot tests of existing HIA tools, developing a database of health impacts of common projects and policies, developing resources for HIA use, building workforce capacity to conduct HIAs, and evaluating HIAs. HIA methods can influence decisionmakers to adjust policies and projects to maximize benefits and minimize harm to the public’s health. PMID:16380558

Influence of marine engine simulator training to marine engineer's competence

NASA Astrophysics Data System (ADS)

Wang, Peng; Cheng, Xiangxin; Ma, Qiang; Song, Xiufu; Liu, Xinjian; Wang, Lianhai

2011-12-01

Marine engine simulator is broadly used in maritime education and training. Maritime education and training institutions usually use this facility to cultivate the hands-on ability and fault-treat ability of marine engineers and students. In this study, the structure and main function of DMS-2005 marine engine simulator is briefly introduced, several teaching methods are discussed. By using Delphi method and AHP method, a comprehensive evaluation system is built and the competence of marine engineers is assessed. After analyzing the calculating data, some conclusions can be drawn: comprehensive evaluation system could be used to assess marine engineer's competence; the training of marine engine simulator is propitious to enhance marine engineers' integrated ability, especially on the aspect of judgment of abnormal situation capacity, emergency treatment ability and safe operation ability.

Influence of marine engine simulator training to marine engineer's competence

NASA Astrophysics Data System (ADS)

Wang, Peng; Cheng, Xiangxin; Ma, Qiang; Song, Xiufu; Liu, Xinjian; Wang, Lianhai

2012-01-01

Marine engine simulator is broadly used in maritime education and training. Maritime education and training institutions usually use this facility to cultivate the hands-on ability and fault-treat ability of marine engineers and students. In this study, the structure and main function of DMS-2005 marine engine simulator is briefly introduced, several teaching methods are discussed. By using Delphi method and AHP method, a comprehensive evaluation system is built and the competence of marine engineers is assessed. After analyzing the calculating data, some conclusions can be drawn: comprehensive evaluation system could be used to assess marine engineer's competence; the training of marine engine simulator is propitious to enhance marine engineers' integrated ability, especially on the aspect of judgment of abnormal situation capacity, emergency treatment ability and safe operation ability.

A cross sectional study investigating weight management motivations, methods and perceived healthy eating and physical activity influences in women up to five years following childbirth.

PubMed

Vincze, Lisa; Rollo, Megan E; Hutchesson, Melinda J; Burrows, Tracy L; MacDonald-Wicks, Lesley; Blumfield, Michelle; Collins, Clare E

2017-06-01

to explore motivations for weight change, weight loss methods used and factors perceived to influence healthy eating and physical activity for weight management following childbirth, and to evaluate differences by socio-demographic, weight status and pregnancy characteristics. cross-sectional online survey completed from May to August 2013. Australian women (n=874, aged 32.8±4.5 years, pre-pregnancy Body Mass Index 25.6±5.7kg/m 2 ) aged 18-40 years who had given birth in the previous 5 years MEASUREMENTS: women self-reported socio-demographic, weight status and pregnancy characteristics. Those who reported being unhappy at their current weight ranked their most to least important reasons for wanting to change their weight from a list of nine options. Weight control methods used in the previous two years were reported from a list of 12 options. Perceived healthy eating and physical activity factors influencing weight management were assessed across 20 items using a five-point Likert scale. the most prevalent motivators reported for weight change were to improve health (26.1%) and lift mood (20.3%). Three-quarters (75.7%) of women reported having used at least one weight loss method in the previous two years. Time constraints due to family commitments, enjoyment of physical activity and healthy eating, motivation and cost were factors most commonly reported to influence weight management. Body mass index, parity, education, household income and time since last birth were related to motivations for weight change, weight loss methods used and/or factors perceived to influence weight management. weight management support provided by health professionals should consider women's expressed motivators and factors influencing weight management, along with differences in sociodemographic, pregnancy and weight status characteristics, in order to engage women at this life-stage and facilitate adoption of healthy lifestyle behaviours. Copyright © 2017 Elsevier Ltd. All rights reserved.

Influence of residual oxygen-15-labeled carbon monoxide radioactivity on cerebral blood flow and oxygen extraction fraction in a dual-tracer autoradiographic method.

PubMed

Iwanishi, Katsuhiro; Watabe, Hiroshi; Hayashi, Takuya; Miyake, Yoshinori; Minato, Kotaro; Iida, Hidehiro

2009-06-01

Cerebral blood flow (CBF), cerebral metabolic rate of oxygen (CMRO(2)), oxygen extraction fraction (OEF), and cerebral blood volume (CBV) are quantitatively measured with PET with (15)O gases. Kudomi et al. developed a dual tracer autoradiographic (DARG) protocol that enables the duration of a PET study to be shortened by sequentially administrating (15)O(2) and C(15)O(2) gases. In this protocol, before the sequential PET scan with (15)O(2) and C(15)O(2) gases ((15)O(2)-C(15)O(2) PET scan), a PET scan with C(15)O should be preceded to obtain CBV image. C(15)O has a high affinity for red blood cells and a very slow washout rate, and residual radioactivity from C(15)O might exist during a (15)O(2)-C(15)O(2) PET scan. As the current DARG method assumes no residual C(15)O radioactivity before scanning, we performed computer simulations to evaluate the influence of the residual C(15)O radioactivity on the accuracy of measured CBF and OEF values with DARG method and also proposed a subtraction technique to minimize the error due to the residual C(15)O radioactivity. In the simulation, normal and ischemic conditions were considered. The (15)O(2) and C(15)O(2) PET count curves with the residual C(15)O PET counts were generated by the arterial input function with the residual C(15)O radioactivity. The amounts of residual C(15)O radioactivity were varied by changing the interval between the C(15)O PET scan and (15)O(2)-C(15)O(2) PET scan, and the absolute inhaled radioactivity of the C(15)O gas. Using the simulated input functions and the PET counts, the CBF and OEF were computed by the DARG method. Furthermore, we evaluated a subtraction method that subtracts the influence of the C(15)O gas in the input function and PET counts. Our simulations revealed that the CBF and OEF values were underestimated by the residual C(15)O radioactivity. The magnitude of this underestimation depended on the amount of C(15)O radioactivity and the physiological conditions. This underestimation was corrected by the subtraction method. This study showed the influence of C(15)O radioactivity in DARG protocol, and the magnitude of the influence was affected by several factors, such as the radioactivity of C(15)O, and the physiological condition.

Electron beam influence on the carbon contamination of electron irradiated hydroxyapatite thin films

NASA Astrophysics Data System (ADS)

Hristu, Radu; Stanciu, Stefan G.; Tranca, Denis E.; Stanciu, George A.

2015-08-01

Electron beam irradiation which is considered a reliable method for tailoring the surface charge of hydroxyapatite is hindered by carbon contamination. Separating the effects of the carbon contamination from those of irradiation-induced trapped charge is important for a wide range of biological applications. In this work we focus on the understanding of the electron-beam-induced carbon contamination with special emphasis on the influence of the electron irradiation parameters on this phenomenon. Phase imaging in atomic force microscopy is used to evaluate the influence of electron energy, beam current and irradiation time on the shape and size of the resulted contamination patterns. Different processes involved in the carbon contamination of hydroxyapatite are discussed.

Development of a selective and sensitive flotation method for determination of trace amounts of cobalt, nickel, copper and iron in environmental samples.

PubMed

Karimi, H; Ghaedi, M; Shokrollahi, A; Rajabi, H R; Soylak, M; Karami, B

2008-02-28

A simple, selective and rapid flotation method for the separation-preconcentration of trace amounts of cobalt, nickel, iron and copper ions using phenyl 2-pyridyl ketone oxime (PPKO) has been developed prior to their flame atomic absorption spectrometric determinations. The influence of pH, amount of PPKO as collector, type and amount of eluting agent, type and amount of surfactant as floating agent and ionic strength was evaluated on the recoveries of analytes. The influences of the concomitant ions on the recoveries of the analyte ions were also examined. The enrichment factor was 93. The detection limits based on 3 sigma for Cu, Ni, Co and Fe were 0.7, 0.7, 0.8, and 0.7 ng mL(-1), respectively. The method has been successfully applied for determination of trace amounts of ions in various real samples.

Microstencils to generate defined, multi-species patterns of bacteria

DOE PAGES

Timm, Collin M.; Hansen, Ryan R.; Doktycz, Mitchel J.; ...

2015-11-12

Microbial communities are complex heterogeneous systems that are influenced by physical and chemical interactions with their environment, host, and community members. Techniques that facilitate the quantitative evaluation of how microscale organization influences the morphogenesis of multispecies communities could provide valuable insights into the dynamic behavior and organization of natural communities, the design of synthetic environments for multispecies culture, and the engineering of artificial consortia. In this work, we demonstrate a method for patterning microbes into simple arrangements that allow the quantitative measurement of growth dynamics as a function of their proximity to one another. The method combines parylene-based liftoff techniquesmore » with microfluidic delivery to simultaneously pattern multiple bacterial species with high viability using low-cost, customizable methods. Furthermore, quantitative measurements of bacterial growth for two competing isolates demonstrate that spatial coordination can play a critical role in multispecies growth and structure.« less

Microstencils to generate defined, multi-species patterns of bacteria

DOE Office of Scientific and Technical Information (OSTI.GOV)

Timm, Collin M.; Hansen, Ryan R.; Doktycz, Mitchel J.

Microbial communities are complex heterogeneous systems that are influenced by physical and chemical interactions with their environment, host, and community members. Techniques that facilitate the quantitative evaluation of how microscale organization influences the morphogenesis of multispecies communities could provide valuable insights into the dynamic behavior and organization of natural communities, the design of synthetic environments for multispecies culture, and the engineering of artificial consortia. In this work, we demonstrate a method for patterning microbes into simple arrangements that allow the quantitative measurement of growth dynamics as a function of their proximity to one another. The method combines parylene-based liftoff techniquesmore » with microfluidic delivery to simultaneously pattern multiple bacterial species with high viability using low-cost, customizable methods. Furthermore, quantitative measurements of bacterial growth for two competing isolates demonstrate that spatial coordination can play a critical role in multispecies growth and structure.« less

Errors in the determination of the solar constant by the Langley method due to the presence of volcanic aerosol

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schotland, R.M.; Hartman, J.E.

1989-02-01

The accuracy in the determination of the solar constant by means of the Langley method is strongly influenced by the spatial inhomogeneities of the atmospheric aerosol. Volcanos frequently inject aerosol into the upper troposphere and lower stratosphere. This paper evaluates the solar constant error that would occur if observations had been taken throughout the plume of El Chichon observed by NASA aircraft in the fall of 1982 and the spring of 1983. A lidar method is suggested to minimize this error. 15 refs.

Design and evaluation of a freeform lens by using a method of luminous intensity mapping and a differential equation

NASA Astrophysics Data System (ADS)

Essameldin, Mahmoud; Fleischmann, Friedrich; Henning, Thomas; Lang, Walter

2017-02-01

Freeform optical systems are playing an important role in the field of illumination engineering for redistributing the light intensity, because of its capability of achieving accurate and efficient results. The authors have presented the basic idea of the freeform lens design method at the 117th annual meeting of the German Society of Applied Optics (DGAOProceedings). Now, we demonstrate the feasibility of the design method by designing and evaluating a freeform lens. The concepts of luminous intensity mapping, energy conservation and differential equation are combined in designing a lens for non-imaging applications. The required procedures to design a lens including the simulations are explained in detail. The optical performance is investigated by using a numerical simulation of optical ray tracing. For evaluation, the results are compared with another recently published design method, showing the accurate performance of the proposed method using a reduced number of mapping angles. As a part of the tolerance analyses of the fabrication processes, the influence of the light source misalignments (translation and orientation) on the beam-shaping performance is presented. Finally, the importance of considering the extended light source while designing a freeform lens using the proposed method is discussed.

Comparison of Bayesian clustering and edge detection methods for inferring boundaries in landscape genetics

USGS Publications Warehouse

Safner, T.; Miller, M.P.; McRae, B.H.; Fortin, M.-J.; Manel, S.

2011-01-01

Recently, techniques available for identifying clusters of individuals or boundaries between clusters using genetic data from natural populations have expanded rapidly. Consequently, there is a need to evaluate these different techniques. We used spatially-explicit simulation models to compare three spatial Bayesian clustering programs and two edge detection methods. Spatially-structured populations were simulated where a continuous population was subdivided by barriers. We evaluated the ability of each method to correctly identify boundary locations while varying: (i) time after divergence, (ii) strength of isolation by distance, (iii) level of genetic diversity, and (iv) amount of gene flow across barriers. To further evaluate the methods' effectiveness to detect genetic clusters in natural populations, we used previously published data on North American pumas and a European shrub. Our results show that with simulated and empirical data, the Bayesian spatial clustering algorithms outperformed direct edge detection methods. All methods incorrectly detected boundaries in the presence of strong patterns of isolation by distance. Based on this finding, we support the application of Bayesian spatial clustering algorithms for boundary detection in empirical datasets, with necessary tests for the influence of isolation by distance. ?? 2011 by the authors; licensee MDPI, Basel, Switzerland.

Attributes of innovations and approaches to scalability – lessons from a national program to extend the scope of practice of health professionals

PubMed Central

Masso, Malcolm; Thompson, Cristina

2016-01-01

The context for the paper was the evaluation of a national program in Australia to investigate extended scopes of practice for health professionals (paramedics, physiotherapists, and nurses). The design of the evaluation involved a mixed-methods approach with multiple data sources. Four multidisciplinary models of extended scope of practice were tested over an 18-month period, involving 26 organizations, 224 health professionals, and 36 implementation sites. The evaluation focused on what could be learned to inform scaling up the extended scopes of practice on a national scale. The evaluation findings were used to develop a conceptual framework for use by clinicians, managers, and policy makers to determine appropriate strategies for scaling up effective innovations. Development of the framework was informed by the literature on the diffusion of innovations, particularly an understanding that certain attributes of innovations influence adoption. The framework recognizes the role played by three groups of stakeholders: evidence producers, evidence influencers, and evidence adopters. The use of the framework is illustrated with four case studies from the evaluation. The findings demonstrate how the scaling up of innovations can be influenced by three quite distinct approaches – letting adoption take place in an uncontrolled, unplanned, way; actively helping the process of adoption; or taking deliberate steps to ensure that adoption takes place. Development of the conceptual framework resulted in two sets of questions to guide decisions about scalability, one for those considering whether to adopt the innovation (evidence adopters), and the other for those trying to decide on the optimal strategy for dissemination (evidence influencers). PMID:27616889

Workload Influence on Fatigue Related Psychological and Physiological Performance Changes of Aviators

PubMed Central

Liu, Xi-Wen; Bian, Ka; Wen, Zhi-Hong; Li, Xiao-Jing; Zhang, Zuo-Ming; Hu, Wen-Dong

2014-01-01

Objective We evaluated a variety of non-invasive physiological technologies and a series of test approaches for examination of aviator performances under conditions of mental workload in order to provide a standard real-time test for physiological and psychological pilot fatigue assessments. Methods Twenty-one male aviators were selected for a simulated flight in a hypobaric cabin with artificial altitude conditions of 2400 meter above sea level. The simulated flight lasted for 1.5 h, and was repeated for two times with an intervening 0.5 h rest period outside the hypobaric cabin. Subjective criteria (a fatigue assessment instrument [FAI]) and objective criteria (a standing-position balance test as well as a critical flicker fusion frequency (CFF) test) were used for fatigue evaluations. Results No significant change was observed in the FAI scores before and after the simulated flight, indicating that there was no subjective fatigue feeling among the participants. However, significant differences were observed in the standing-position balance and CFF tests among the subjects, suggesting that psychophysiological indexes can reflect mental changes caused by workload to a certain extent. The CFF test was the simplest and clearly indicated the occurrence of workload influences on pilot performances after a simulated flight. Conclusions Results showed that the CFF test was the easiest way to detect workload caused mental changes after a simulated flight in a hypobaric cabin and reflected the psychophysiological state of aviators. We suggest that this test might be used as an effective routine method for evaluating the workload influences on mental conditions of aviators. PMID:24505277

Spot breeding method to evaluate the determinism of magnetorheological finishing

NASA Astrophysics Data System (ADS)

Yang, Hang; He, Jianguo; Huang, Wen; Zhang, Yunfei

2017-03-01

The influences of immersion depth of magnetorheological finishing (MRF) on the shape and material removal rate (MRR) of removal function are theoretically investigated to establish the spot transition mechanism. Based on this mechanism, for the first time, the spot breeding method to predict the shape and removal rate of MRF spot is proposed. The UBK7 optical parts are polished to verify the proposed method on experimental installation PKC-1000Q2 developed by ourselves. The experimental results reveal that the predictions of shape and MRR with this method are precise. The proposed method provides a basis for analyzing the determinism of MRF due to geometry of the process.

Ultra-high performance liquid chromatography coupled with photo-diode array and quadrupole/time-of-flight mass spectrometry based chemical profiling approach to evaluate the influence of preparation methods on the holistic quality of Qiong-Yu-Gao, a traditional complex herbal medicine.

PubMed

Xu, Jin-Di; Mao, Qian; Shen, Hong; Zhu, Ling-Ying; Li, Song-Lin; Yan, Ru

2013-08-23

Qiong-Yu-Gao (QYG), consisting of Rehmanniae Radix (RR), Poriae (PO) and Ginseng Radix (GR), is a commonly used tonic traditional complex herbal medicine (CHM). So far, three different methods have been documented for preparation of QYG, i.e. method 1 (M1): mixing powders of GR and PO with decoction of RR; method 2 (M2): combining the decoction of RR and PO with the decoction of GR; method 3 (M3): decocting the mixture of RR, GR and PO. In present study, an ultra-high performance liquid chromatography coupled with photo-diode array and quadrupole/time-of-flight mass spectrometry (UHPLC-PDA-QTOF-MS/MS) based chemical profiling approach was developed to investigate the influence of the three preparation methods on the holistic quality of QYG. All detected peaks were unambiguously identified by comparing UV spectra, accurate mass data/characteristic mass fragments and retention times with those of reference compounds, and/or tentatively assigned by matching empirical molecular formula with that of known compounds, and/or elucidating quasi-molecular ions and fragment ions referring to information available in literature. A total of 103 components, mainly belonging to ginsenosides, phenethylalcohol glycosides, iridoid glycosides and triterpenoid acids, were identified, of which 5 degraded ginsenosides were putatively determined to be newly generated during preparation procedures of QYG samples. Triterpenoid acids and malonyl-ginsenosides were detected only in M1 samples, while degraded ginsenosides were merely detectable in M2/M3 samples. The possible reasons for the difference among chemical profiles of QYG samples prepared with three methods were also discussed. It could be concluded that preparation method do significantly affect the holistic quality of QYG. The influence of the altered chemical profiles on the bioactivity of QYG needs further investigation. The present study demonstrated that UHPLC-PDA-QTOF-MS/MS based chemical profiling approach is efficient and reliable for evaluating the holistic quality of traditional CHM. Copyright © 2013 Elsevier B.V. All rights reserved.

Hey girlfriend: an evaluation of AIDS prevention among women in the sex industry.

PubMed

Dorfman, L E; Derish, P A; Cohen, J B

1992-01-01

Increasingly, acquired immunodeficiency syndrome (AIDS) prevention programs have been developed to reach and influence street-based populations. Standard methods of evaluation do not fit the conditions of such programs. This article describes a process and outcome evaluation of an AIDS prevention program for sex workers in which qualitative and quantitative methods were combined in order to mediate research problems endemic to street-based populations. Methods included epidemiological questionnaires, open-ended interviews with participants, and ethnographic field notes. Process evaluation findings show that field staff who were indigenous to the neighborhood and population readily gained access to the community of sex workers and simultaneously became role models for positive behavior change. Outcome findings show that sex workers do feel at risk for AIDS, but usually from clients rather than from husbands or boyfriends. Accordingly, they use condoms more frequently with clients than with steady partners. Increasing condom use among sex workers with their steady partners remains an important challenge for AIDS prevention. Combining qualitative and quantitative research data provided a more comprehensive assessment of how to reach sex workers with effective AIDS risk reduction messages than either method could have provided alone.

Laser interference effect evaluation method based on character of laser-spot and image feature

NASA Astrophysics Data System (ADS)

Tang, Jianfeng; Luo, Xiaolin; Wu, Lingxia

2016-10-01

Evaluating the laser interference effect to CCD objectively and accurately has great research value. Starting from the change of the image's feature before and after interference, meanwhile, considering the influence of the laser-spot distribution character on the masking degree of the image feature information, a laser interference effect evaluation method based on character of laser-spot and image feature was proposed. It reflected the laser-spot distribution character using the distance between the center of the laser-spot and center of the target. It reflected the change of the global image feature using the changes of image's sparse coefficient matrix, which was obtained by the SSIM-inspired orthogonal matching pursuit (OMP) sparse coding algorithm. What's more, the assessment method reflected the change of the local image feature using the changes of the image's edge sharpness, which could be obtained by the change of the image's gradient magnitude. Taken together, the laser interference effect can be evaluated accurately. In terms of the laser interference experiment results, the proposed method shows good rationality and feasibility under the disturbing condition of different laser powers, and it can also overcome the inaccuracy caused by the change of the laser-spot position, realizing the evaluation of the laser interference effect objectively and accurately.

A hyperspectral image optimizing method based on sub-pixel MTF analysis

NASA Astrophysics Data System (ADS)

Wang, Yun; Li, Kai; Wang, Jinqiang; Zhu, Yajie

2015-04-01

Hyperspectral imaging is used to collect tens or hundreds of images continuously divided across electromagnetic spectrum so that the details under different wavelengths could be represented. A popular hyperspectral imaging methods uses a tunable optical band-pass filter settled in front of the focal plane to acquire images of different wavelengths. In order to alleviate the influence of chromatic aberration in some segments in a hyperspectral series, in this paper, a hyperspectral optimizing method uses sub-pixel MTF to evaluate image blurring quality was provided. This method acquired the edge feature in the target window by means of the line spread function (LSF) to calculate the reliable position of the edge feature, then the evaluation grid in each line was interpolated by the real pixel value based on its relative position to the optimal edge and the sub-pixel MTF was used to analyze the image in frequency domain, by which MTF calculation dimension was increased. The sub-pixel MTF evaluation was reliable, since no image rotation and pixel value estimation was needed, and no artificial information was introduced. With theoretical analysis, the method proposed in this paper is reliable and efficient when evaluation the common images with edges of small tilt angle in real scene. It also provided a direction for the following hyperspectral image blurring evaluation and the real-time focal plane adjustment in real time in related imaging system.

Evaluation of TOPLATS on three Mediterranean catchments

NASA Astrophysics Data System (ADS)

Loizu, Javier; Álvarez-Mozos, Jesús; Casalí, Javier; Goñi, Mikel

2016-08-01

Physically based hydrological models are complex tools that provide a complete description of the different processes occurring on a catchment. The TOPMODEL-based Land-Atmosphere Transfer Scheme (TOPLATS) simulates water and energy balances at different time steps, in both lumped and distributed modes. In order to gain insight on the behavior of TOPLATS and its applicability in different conditions a detailed evaluation needs to be carried out. This study aimed to develop a complete evaluation of TOPLATS including: (1) a detailed review of previous research works using this model; (2) a sensitivity analysis (SA) of the model with two contrasted methods (Morris and Sobol) of different complexity; (3) a 4-step calibration strategy based on a multi-start Powell optimization algorithm; and (4) an analysis of the influence of simulation time step (hourly vs. daily). The model was applied on three catchments of varying size (La Tejeria, Cidacos and Arga), located in Navarre (Northern Spain), and characterized by different levels of Mediterranean climate influence. Both Morris and Sobol methods showed very similar results that identified Brooks-Corey Pore Size distribution Index (B), Bubbling pressure (ψc) and Hydraulic conductivity decay (f) as the three overall most influential parameters in TOPLATS. After calibration and validation, adequate streamflow simulations were obtained in the two wettest catchments, but the driest (Cidacos) gave poor results in validation, due to the large climatic variability between calibration and validation periods. To overcome this issue, an alternative random and discontinuous method of cal/val period selection was implemented, improving model results.

Influence of sex and CYP2D6 genotype on mirtazapine disposition, evaluated in Spanish healthy volunteers.

PubMed

Borobia, Alberto M; Novalbos, Jesús; Guerra-López, Pedro; López-Rodríguez, Rosario; Tabares, Beatriz; Rodríguez, Vanesa; Abad-Santos, Francisco; Carcas, Antonio J

2009-06-01

To evaluate the influence of sex and CYP2D6 genotype on mirtazapine disposition within two bioequivalence studies in healthy volunteers. Seventy-two healthy volunteers were included in two standard 2 x 2 crossover bioequivalence trials. Subjects received a single 30-mg oral dose of each mirtazapine formulation in each study period. Plasma concentrations were measured from 0 to 96 or 120 h by a HPLC with coupled mass spectrometry validated method. CYP2D6 genotyping was available for 68 subjects that were classified into three phenotypic groups depending on the number of active gene copies: extensive/ultrarapid metabolizers (UM-EM), intermediate (IM) and poor metabolizers (PM). To evaluate the influence of sex and genotype on mirtazapine disposition we performed a linear mixed model for repeated measures. Pharmacokinetic data were log-transformed and AUC and C(max) adjusted to the administered dose/weight. Factors included in the model were centre, formulation, period, sequence, sex and genotype as fixed effects, and subject nested sequence x sex x genotype as random one. A second model was also performed adding the interaction sex x genotype to the previous model. Mirtazapine disposition evaluated as AUC(0-infinity) is influenced by sex (p=0.007) and CYP2D6 phenotype group (p=0.01). Attending to the theoretical figures provided by the model, mean (95% CI) dose/weight adjusted AUC(0-infinity) (ng h/ml)/(mg/kg) is 1516.62 (1411.27-1628.22) in EM/UM, 1613.63 (1482.14-1758.55) in IM and 2049.28 (1779.78-2357.24) in PM. In the case of C(max) these figures also show a trend to higher values in PM, but it did not reach statistical significance. Females show a lower dose/weight adjusted AUC(0-infinity): 1594.39 (1477.70-1720.28) vs. 1837.65 (1694.67-1992.70). On the contrary dose/weight adjusted C(max) is higher in females than in males: 38.33 (34.79-42.28) vs. 32.66 (29.44-36.21). Both CYP2D6 genotype group and sex influence the disposition of mirtazapine in healthy volunteers and confirm reported data in the literature obtained by different methods. No sex-by-genotype interaction could be detected.

The Development Evaluation of Economic Zones in China.

PubMed

Liu, Wei; Shi, Hong-Bo; Zhang, Zhe; Tsai, Sang-Bing; Zhai, Yuming; Chen, Quan; Wang, Jiangtao

2018-01-02

After the Chinese reform and opening up, the construction of economic zones, such as Special Economic Zones, Hi-tech Zones and Bonded Zones, has played an irreplaceable role in China's economic development. Currently, against the background of Chinese economic transition, research on development evaluation of economic zones has become popular and necessary. Similar research usually focuses on one specific field, and the methods that are used to evaluate it are simple. This research aims to analyse the development evaluation of zones by synthesis. A new hybrid multiple criteria decision making (MCDM) model that combines the DEMATEL technique and the DANP method is proposed. After establishing the evaluation criterion system and acquiring data, the influential weights of dimensions and criteria can be calculated, which will be a guide for forming measures of development. Shandong Peninsula Blue Economic Zone is used in the empirical case analysis. The results show that Transportation Conditions, Industrial Structure and Business Climate are the main influencing criteria and measures based on these criteria are proposed.

The Development Evaluation of Economic Zones in China

PubMed Central

Shi, Hong-Bo; Zhang, Zhe; Zhai, Yuming; Chen, Quan; Wang, Jiangtao

2018-01-01

After the Chinese reform and opening up, the construction of economic zones, such as Special Economic Zones, Hi-tech Zones and Bonded Zones, has played an irreplaceable role in China’s economic development. Currently, against the background of Chinese economic transition, research on development evaluation of economic zones has become popular and necessary. Similar research usually focuses on one specific field, and the methods that are used to evaluate it are simple. This research aims to analyse the development evaluation of zones by synthesis. A new hybrid multiple criteria decision making (MCDM) model that combines the DEMATEL technique and the DANP method is proposed. After establishing the evaluation criterion system and acquiring data, the influential weights of dimensions and criteria can be calculated, which will be a guide for forming measures of development. Shandong Peninsula Blue Economic Zone is used in the empirical case analysis. The results show that Transportation Conditions, Industrial Structure and Business Climate are the main influencing criteria and measures based on these criteria are proposed. PMID:29301304

[Health economics and antibiotic therapy].

PubMed

Leclercq, P; Bigdéli, M

1995-01-01

In the field of antibiotic therapy, particularly the methods of economic evaluation hold one's attention within the wide range of health economics' applications. Several tools allow a comparison of the outcomes of alternative strategies and thereby guide choices to the most appropriate solutions. After a brief recall of the methods classically used to evaluate health care strategy, the authors stress the importance and difficulty of fixing and applying a correct and satisfactory procedure for evaluation. An evaluation example of antibiotic therapy allows to illustrate the application of the principles confronting a field in which competition is intense and economic stakes stay large--a fact which naturally yields to seek after objective decision making criteria. The health care policies drawn by public authorities as well as the marketing strategies of the health sector trade are partly based on such evaluations. If these techniques are not intended for the practitioner in the first place, they should not be indifferent to him since they influence health authorities and thereby indirectly affect the therapeutic freedom of the physician.

Headspace profiling of cocaine samples for intelligence purposes.

PubMed

Dujourdy, Laurence; Besacier, Fabrice

2008-08-06

A method for determination of residual solvents in illicit hydrochloride cocaine samples using static headspace-gas chromatography (HS-GC) associated with a storage computerized procedure is described for the profiling and comparison of seizures. The system involves a gas chromatographic separation of 18 occluded solvents followed by fully automatic data analysis and transfer to a PHP/MySQL database. First, a fractional factorial design was used to evaluate the main effects of some critical method parameters (salt choice, vial agitation intensity, oven temperature, pressurization and loop equilibration) on the results with a minimum of experiments. The method was then validated for tactical intelligence purposes (batch comparison) via several studies: selection of solvents and mathematical comparison tool, reproducibility and "cutting" influence studies. The decision threshold to determine the similarity of two samples was set and false positives and negatives evaluated. Finally, application of the method to distinguish geographical origins is discussed.

Flow, packing and compaction properties of novel coprocessed multifunctional directly compressible excipients prepared from tapioca starch and mannitol.

PubMed

Adeoye, Oluwatomide; Alebiowu, Gbenga

2014-12-01

Novel multifunctional excipients were prepared by coprocessing tapioca starch with mannitol using two methods viz; co-grinding and co-fusion. The flow, packing and compaction properties of the native and novel excipients were evaluated by using density, Hausner's ratio, angle of repose, the maximum volume reduction, consolidation index, the rate of consolidation, angle of internal friction, morphological properties, Heckel analysis, tensile strength and dilution potential as evaluation parameters. The study revealed that the method of coprocessing, particle size and particle shape influenced the properties of the resulting novel excipients. Co-grinding was less effective than co-fusion in the preparation of excipients with enhanced properties. The study concluded that coprocessing tapioca starch and mannitol will enhance the flow, packing and compaction properties of the novel excipient and that the co-fusion method of coprocessing would produce novel excipients with enhanced direct compression potential compared to the co-grinding method.

Investigating the Dimensionality of Examinee Motivation across Instruction Conditions in Low-Stakes Testing Contexts

ERIC Educational Resources Information Center

Finney, Sara J.; Mathers, Catherine E.; Myers, Aaron J.

2016-01-01

Research investigating methods to influence examinee motivation during low-stakes assessment of student learning outcomes has involved manipulating test session instructions. The impact of instructions is often evaluated using a popular self-report measure of test-taking motivation. However, the impact of these manipulations on the psychometric…

Genetic Influences on Cognitive Function Using the Cambridge Neuropsychological Test Automated Battery

ERIC Educational Resources Information Center

Singer, Jamie J.; MacGregor, Alex J.; Cherkas, Lynn F.; Spector, Tim D.

2006-01-01

The genetic relationship between intelligence and components of cognition remains controversial. Conflicting results may be a function of the limited number of methods used in experimental evaluation. The current study is the first to use CANTAB (The Cambridge Neuropsychological Test Automated Battery). This is a battery of validated computerised…

Successful Methods for Increasing and Improving Parent and Child Interactions.

ERIC Educational Resources Information Center

Allen, Sharon M.; And Others

Recognizing that parents are their children's first teachers and that their parenting style can influence educational experiences, this study used an ethnographic approach to evaluate the impact on parent-child interaction of the parent education component of the South Dakota Head Start/Public School Transition Project. The demonstration group was…

Assessing dietary intake in childhood cancer survivors: Food frequency questionnaire versus 24-hour diet recalls

USDA-ARS?s Scientific Manuscript database

Cancer diagnosis and treatment may influence dietary intake. The validity of using self-reported methods to quantify dietary intake has not been evaluated in childhood cancer survivors. We validated total energy intake (EI) reported from Food Frequency Questionnaire (FFQ) and repeated 24-hour diet r...

Evaluation of strength-controlling defects in paper by stress concentration analyses

Treesearch

John M. Considine; David W. Vahey; James W. Evans; Kevin T. Turner; Robert E. Rowlands

2011-01-01

Cellulosic webs, such as paper materials, are composed of an interwoven, bonded network of cellulose fibers. Strength-controlling parameters in these webs are influenced by constituent fibers and method of processing and manufacture. Instead of estimating the effect on tensile strength of each processing/manufacturing variable, this study modifies and compares the...

A STUDY OF THE INFLUENCE OF OUTDOOR ENVIRONMENT INCLUDING COMBUSTION RELATED PRODUCTS ON THE INDOOR ENVIRONMENT (ASTHMA INITIATIVE)

EPA Science Inventory

This project is a component of a multi-disciplinary collaboration between NHEERL, NERL, and NRMRL to develop and evaluate methods to examine the role of environmental factors on the induction and exacerbation of asthma within the Long-term Child Development Study (LCDS). This pr...

Occurrence of pesticides and contaminants of emerging concern in surface waters: Influence of surrounding land use and evaluation of sampling methods

USDA-ARS?s Scientific Manuscript database

Biologically active compounds originating from agricultural, residential, and industrial sources have been detected in surface waters, which have invoked concern of their potential ecological and human health effects. Automated and grab surface water samples, passive water samples - Polar Organic Co...

Utilizing Mutual Aid in Reducing Adolescent Substance Use and Developing Group Engagement

ERIC Educational Resources Information Center

Mogro-Wilson, Cristina; Letendre, Joan; Toi, Hiroki; Bryan, Janelle

2015-01-01

Objective: This study assessed the effectiveness of mutual aid groups for high school students. Methods: A quasi-experimental design was applied to 242 adolescents, where every other adolescent was assigned to the intervention or the control condition. The study evaluated the influence of implementing mutual aid groups in decreasing perceived risk…

Evaluation of Modified Risk Claim Advertising Formats for Camel Snus

ERIC Educational Resources Information Center

Fix, Brian V.; Adkison, Sarah E.; O'Connor, Richard J.; Bansal-Travers, Maansi; Cummings, K. Michael; Rees, Vaughan W.; Hatsukami, Dorothy K.

2017-01-01

Objectives: The US Food and Drug Administration (FDA) has regulatory authority for modified risk tobacco product advertising claims. To guide future regulatory efforts, we investigated how variations in modified risk claim advertisements influence consumer perceptions of product risk claims for Camel Snus. Methods: Young people and adults (15-65),…

Serving Bowl Selection Biases the Amount of Food Served

ERIC Educational Resources Information Center

van Kleef, Ellen; Shimizu, Mitsuru; Wansink, Brian

2012-01-01

Objective: To determine how common serving bowls containing food for multiple persons influence serving behavior and consumption and whether they do so independently of satiation and food evaluation. Methods: In this between-subjects experiment, 68 participants were randomly assigned to either a group serving pasta from a large-sized bowl (6.9-L…

Evaluation of the morphology of metal particles in intrinsic conductive polymer dispersions

NASA Astrophysics Data System (ADS)

Lempa, E.; Graßmann, C.; Rabe, M.; Schwarz-Pfeiffer, A.; van Langenhove, L.

2017-10-01

For the production of smart textiles the resistivity of prints and coatings with intrinsic conductive polymers is often too high and the performance properties not sufficient. The addition of metal components enhances many characteristics, however the choice of type of metal, morphology and application method influence results to great extend.

The influence of physiological status on age prediction of Anopheles arabiensis using near infra-red spectroscopy

USDA-ARS?s Scientific Manuscript database

Determining the age of malaria vectors is essential for evaluating the impact of interventions that reduce the survival of wild mosquito populations and for estimating changes in vectorial capacity. Near infra-red spectroscopy (NIRS) is a simple and non-destructive method that has been used to deter...

A Bayesian Method for Evaluating Trainee Proficiency. Technical Paper 323.

ERIC Educational Resources Information Center

Epstein, Kenneth I.; Steinheiser, Frederick H., Jr.

A multiparameter, programmable model was developed to examine the interactive influence of certain parameters on the probability of deciding that an examinee had attained a specified degree of mastery. It was applied within the simulated context of performance testing of military trainees. These parameters included: (1) the number of assumed…

Integrating design science theory and methods to improve the development and evaluation of health communication programs.

PubMed

Neuhauser, Linda; Kreps, Gary L

2014-12-01

Traditional communication theory and research methods provide valuable guidance about designing and evaluating health communication programs. However, efforts to use health communication programs to educate, motivate, and support people to adopt healthy behaviors often fail to meet the desired goals. One reason for this failure is that health promotion issues are complex, changeable, and highly related to the specific needs and contexts of the intended audiences. It is a daunting challenge to effectively influence health behaviors, particularly culturally learned and reinforced behaviors concerning lifestyle factors related to diet, exercise, and substance (such as alcohol and tobacco) use. Too often, program development and evaluation are not adequately linked to provide rapid feedback to health communication program developers so that important revisions can be made to design the most relevant and personally motivating health communication programs for specific audiences. Design science theory and methods commonly used in engineering, computer science, and other fields can address such program and evaluation weaknesses. Design science researchers study human-created programs using tightly connected build-and-evaluate loops in which they use intensive participatory methods to understand problems and develop solutions concurrently and throughout the duration of the program. Such thinking and strategies are especially relevant to address complex health communication issues. In this article, the authors explore the history, scientific foundation, methods, and applications of design science and its potential to enhance health communication programs and their evaluation.

Non-invasive monitoring of muscle blood perfusion by photoplethysmography: evaluation of a new application.

PubMed

Sandberg, M; Zhang, Q; Styf, J; Gerdle, B; Lindberg, L-G

2005-04-01

To evaluate a specially developed photoplethysmographic (PPG) technique, using green and near-infrared light sources, for simultaneous non-invasive monitoring of skin and muscle perfusion. Evaluation was based on assessments of changes in blood perfusion to various provocations, such as post-exercise hyperaemia and hyperaemia following the application of liniment. The deep penetrating feature of PPG was investigated by measurement of optical radiation inside the muscle. Simultaneous measurements using ultrasound Doppler and the new PPG application were performed to elucidate differences between the two methods. Specific problems related to the influence of skin temperature on blood flow were highlightened, as well. Following static and dynamic contractions an immediate increase in muscle perfusion was shown, without increase in skin perfusion. Liniment application to the skin induced a rapid increase in skin perfusion, but not in muscle. Both similarities and differences in blood flow measured by Ultrasound Doppler and PPG were demonstrated. The radiant power measured inside the muscle, by use of an optical fibre, showed that the near-infrared light penetrates down to the vascular depth inside the muscle. The results of this study indicate the potentiality of the method for non-invasive measurement of local muscle perfusion, although some considerations still have to be accounted for, such as influence of temperature on blood perfusion.

Impact of nutrition environmental interventions on point-of-purchase behavior in adults: a review.

PubMed

Seymour, Jennifer D; Yaroch, Amy Lazarus; Serdula, Mary; Blanck, Heidi Michels; Khan, Laura Kettel

2004-09-01

Nutrition interventions targeted to individuals are unlikely to significantly shift US dietary patterns as a whole. Environmental and policy interventions are more promising for shifting these patterns. We review interventions that influenced the environment through food availability, access, pricing, or information at the point-of-purchase in worksites, universities, grocery stores, and restaurants. Thirty-eight nutrition environmental intervention studies in adult populations, published between 1970 and June 2003, were reviewed and evaluated on quality of intervention design, methods, and description (e.g., sample size, randomization). No policy interventions that met inclusion criteria were found. Many interventions were not thoroughly evaluated or lacked important evaluation information. Direct comparison of studies across settings was not possible, but available data suggest that worksite and university interventions have the most potential for success. Interventions in grocery stores appear to be the least effective. The dual concerns of health and taste of foods promoted were rarely considered. Sustainability of environmental change was never addressed. Interventions in "limited access" sites (i.e., where few other choices were available) had the greatest effect on food choices. Research is needed using consistent methods, better assessment tools, and longer durations; targeting diverse populations; and examining sustainability. Future interventions should influence access and availability, policies, and macroenvironments.

Evaluation of anode (electro)catalytic materials for the direct borohydride fuel cell: Methods and benchmarks

NASA Astrophysics Data System (ADS)

Olu, Pierre-Yves; Job, Nathalie; Chatenet, Marian

2016-09-01

In this paper, different methods are discussed for the evaluation of the potential of a given catalyst, in view of an application as a direct borohydride fuel cell DBFC anode material. Characterizations results in DBFC configuration are notably analyzed at the light of important experimental variables which influence the performances of the DBFC. However, in many practical DBFC-oriented studies, these various experimental variables prevent one to isolate the influence of the anode catalyst on the cell performances. Thus, the electrochemical three-electrode cell is a widely-employed and useful tool to isolate the DBFC anode catalyst and to investigate its electrocatalytic activity towards the borohydride oxidation reaction (BOR) in the absence of other limitations. This article reviews selected results for different types of catalysts in electrochemical cell containing a sodium borohydride alkaline electrolyte. In particular, propositions of common experimental conditions and benchmarks are given for practical evaluation of the electrocatalytic activity towards the BOR in three-electrode cell configuration. The major issue of gaseous hydrogen generation and escape upon DBFC operation is also addressed through a comprehensive review of various results depending on the anode composition. At last, preliminary concerns are raised about the stability of potential anode catalysts upon DBFC operation.

Use of Onion Extract as a Dairy Cattle Feed Supplement: Monitoring Propyl Propane Thiosulfonate as a Marker of Its Effect on Milk Attributes.

PubMed

Abad, Paloma; Arroyo-Manzanares, Natalia; Gil, Lidia; García-Campaña, Ana M

2017-02-01

Onion extract is used as a feed supplement for the diet of dairy cows, acting as inhibitor of methane production; however, its properties could alter sensory attributes of milk. In this work, we propose a method to evaluate the influence of this extract on milk properties, using propyl propane thiosulfonate (PTSO) as a marker. PTSO is extracted using a quick, easy, cheap, effective, rugged, and safe procedure and monitored by high-performance liquid chromatography with ultraviolet detection. The method was applied to milk samples obtained from 100 dairy cows fed during 2 months with enriched feed. In addition, a milk tasting panel was established to evaluate the PTSO residue that should not be exceeded to guarantee milk sensory attributes. It was established that a value of PTSO lower than 2 mg kg -1 does not alter milk organoleptic properties. This fact makes onion extract an interesting alternative as a feed supplement to control the methane emissions without any influence on milk attributes.

UHPLC-high-resolution mass spectrometry determination of bisphenol A and plastic additives released by polycarbonate tableware: influence of ageing and surface damage.

PubMed

Bignardi, Chiara; Cavazza, Antonella; Laganà, Carmen; Salvadeo, Paola; Corradini, Claudio

2015-10-01

A new UHPLC-ESI-Orbitrap method for the identification and the quantitative determination of bisphenol A and some common additives employed in plastic manufacturing has been developed and validated. The method has been applied to evaluate the migration from 14 samples of tableware of different age and degree of surface damage, in both ethanol and isooctane (used as food simulants according to EU plastic regulation). Bisphenol A, three UV light absorbers, and one whitening agent were detected and quantified. Data were analyzed with the aim of exploring a possible correlation between bisphenol A and additives release, ageing, and surface integrity. A high correlation between age of samples, surface damage, and bisphenol A migration has been evaluated, while the release of additives was not correlated with other parameters. Obtained data showed for the first time that the release of bisphenol A seems to be more connected to ageing than to scratches and cracks occurrence. Graphical Abstract Bisphenol A and additives released by polycarbonate tableware: influence of ageing and surface damage.

Social and spatial processes associated with childhood diarrheal disease in Matlab, Bangladesh.

PubMed

Perez-Heydrich, Carolina; Furgurson, Jill M; Giebultowicz, Sophia; Winston, Jennifer J; Yunus, Mohammad; Streatfield, Peter Kim; Emch, Michael

2013-01-01

We develop novel methods for conceptualizing geographic space and social networks to evaluate their respective and combined contributions to childhood diarrheal incidence. After defining maternal networks according to direct familial linkages between females, and road networks using satellite imagery of the study area, we use a spatial econometrics model to evaluate the significance of correlation terms relating childhood diarrheal incidence to the incidence observed within respective networks. Disease was significantly clustered within road networks across time, but only inconsistently correlated within maternal networks. These methods could be widely applied to systems in which both social and spatial processes jointly influence health outcomes. Copyright © 2012 Elsevier Ltd. All rights reserved.

Feeding, evaluating, and controlling rumen function.

PubMed

Lean, Ian J; Golder, Helen M; Hall, Mary Beth

2014-11-01

Achieving optimal rumen function requires an understanding of feeds and systems of nutritional evaluation. Key influences on optimal function include achieving good dry matter intake. The function of feeds in the rumen depends on other factors including chemical composition, rate of passage, degradation rate of the feed, availability of other substrates and cofactors, and individual animal variation. This article discusses carbohydrate, protein, and fat metabolism in the rumen, and provides practical means of evaluation of rations in the field. Conditions under which rumen function is suboptimal (ie, acidosis and bloat) are discussed, and methods for control examined. Copyright © 2014 Elsevier Inc. All rights reserved.

Toward Better Research on--and Thinking about--Evaluation Influence, Especially in Multisite Evaluations

ERIC Educational Resources Information Center

Mark, Melvin M.

2011-01-01

Evaluation is typically carried out with the intention of making a difference in the understandings and actions of stakeholders and decision makers. The author provides a general review of the concepts of evaluation "use," evaluation "influence," and "influence pathways," with connections to multisite evaluations. The study of evaluation influence…

A method to evaluate hydraulic fracture using proppant detection.

PubMed

Liu, Juntao; Zhang, Feng; Gardner, Robin P; Hou, Guojing; Zhang, Quanying; Li, Hu

2015-11-01

Accurate determination of the proppant placement and propped fracture height are important for evaluating and optimizing stimulation strategies. A technology using non-radioactive proppant and a pulsed neutron gamma energy spectra logging tool to determine the placement and height of propped fractures is proposed. Gd2O3 was incorporated into ceramic proppant and a Monte Carlo method was utilized to build the logging tools and formation models. Characteristic responses of the recorded information of different logging tools to fracture widths, proppant concentrations and influencing factors were studied. The results show that Gd capture gamma rays can be used to evaluate propped fractures and it has higher sensitivity to the change of fracture width and traceable proppant content compared with the exiting non-radioactive proppant evaluation techniques and only an after-fracture measurement is needed for the new method; The changes in gas saturation and borehole size have a great impact on determining propped fractures when compensated neutron and pulsed neutron capture tool are used. A field example is presented to validate the application of the new technique. Copyright © 2015 Elsevier Ltd. All rights reserved.

Matrix effects on organic pollutants analysis in marine sediment

NASA Astrophysics Data System (ADS)

Azis, M. Y.; Asia, L.; Piram, A.; Buchari, B.; Doumenq, P.; Setiyanto, H.

2018-05-01

Interference from the matrix sample can influence of the accurate analytical method. Accelerated Solvent Extraction and their purification methods were tried to separate the organic micropollutants respectively in marine sediment. Those matrix were as organic pollutants evaluation in marine environment. Polychlorinated Biphenyls (PCBs) and Organochlorine pesticides (OCPs) are two examples organic pollutant in environment which are carcinogenic and mutagenic. Marine sediments are important matrices of information regarding the human activities in coastal areas as well as the fate and behavior of organic pollutants, which are persistent in long-term. This research purpose to evaluate the matrice effect and the recovery from marine sediment spiking with several standar solution and deuterium of molecular target from organic pollutants in not polluted sample of sediment. Matrice samples was tested from indicate in unpolluted location. The methods were evaluated with standard calibration curve (linearity < 0.999, LOQ various ranged 0.5-1000 pg.μL-1 and LOD > LOQ). Recovery (YE) relative, Matrice Effect (ME) relative correction with deuteriated standar were evaluated the interference the matrix. Interference effect for OCPs compounds were higher than PCBs in marine sediment.

Measurement of facial movements with Photoshop software during treatment of facial nerve palsy.

PubMed

Pourmomeny, Abbas Ali; Zadmehr, Hassan; Hossaini, Mohsen

2011-10-01

Evaluating the function of facial nerve is essential in order to determine the influences of various treatment methods. The aim of this study was to evaluate and assess the agreement of Photoshop scaling system versus the facial grading system (FGS). In this semi-experimental study, thirty subjects with facial nerve paralysis were recruited. The evaluation of all patients before and after the treatment was performed by FGS and Photoshop measurements. The mean values of FGS before and after the treatment were 35 ± 25 and 67 ± 24, respectively (p < 0.001). In Photoshop assessment, mean changes of face expressions in the impaired side relative to the normal side in rest position and three main movements of the face were 3.4 ± 0.55 and 4.04 ± 0.49 millimeter before and after the treatment, respectively (p < 0.001). Spearman's correlation coefficient between different values in the two methods was 0.66 (p < 0.001). Evaluating the facial nerve palsy using Photoshop was more objective than using FGS. Therefore, it may be recommended to use this method instead.

Annoyance rate evaluation method on ride comfort of vehicle suspension system

NASA Astrophysics Data System (ADS)

Tang, Chuanyin; Zhang, Yimin; Zhao, Guangyao; Ma, Yan

2014-03-01

The existing researches of the evaluation method of ride comfort of vehicle mainly focus on the level of human feelings to vibration. The level of human feelings to vibration is influenced by many factors, however, the ride comfort according to the common principle of probability and statistics and simple binary logic is unable to reflect these uncertainties. The random fuzzy evaluation model from people subjective response to vibration is adopted in the paper, these uncertainties are analyzed from the angle of psychological physics. Discussing the traditional evaluation of ride comfort during vehicle vibration, a fuzzily random evaluation model on the basis of annoyance rate is proposed for the human body's subjective response to vibration, with relevant fuzzy membership function and probability distribution given. A half-car four degrees of freedom suspension vibration model is described, subject to irregular excitations from the road surface, with the aid of software Matlab/Simulink. A new kind of evaluation method for ride comfort of vehicles is proposed in the paper, i.e., the annoyance rate evaluation method. The genetic algorithm and neural network control theory are used to control the system. Simulation results are obtained, such as the comparison of comfort reaction to vibration environments between before and after control, relationship of annoyance rate to vibration frequency and weighted acceleration, based on ISO 2631/1(1982), ISO 2631-1(1997) and annoyance rate evaluation method, respectively. Simulated assessment results indicate that the proposed active suspension systems prove to be effective in the vibration isolation of the suspension system, and the subjective response of human being can be promoted from very uncomfortable to a little uncomfortable. Furthermore, the novel evaluation method based on annoyance rate can further estimate quantitatively the number of passengers who feel discomfort due to vibration. A new analysis method of vehicle comfort is presented.

Tracing the Pathways of Evaluation Influence: From Theory to Practice

ERIC Educational Resources Information Center

Banuelos, Noelle Vargas

2012-01-01

This study sought to explore the ways that evaluation influenced changes in attitudes and actions at the individual and interpersonal levels and the pathways through which this influence occurred, all in a real-world evaluation context. Specifically, Mark & Henry's (2004) proposed model of evaluation influence was used as the framework…

Postgraduation retention of medical students from Otago and Auckland medical programmes.

PubMed

Shelker, William; Poole, Phillippa; Bagg, Warwick; Wood, Ian; Glue, Paul

2014-01-24

Auckland and Otago medical programmes have different methods for selecting students. This study compared postgraduate retention in New Zealand (NZ) of medical graduates from the two medical programmes, to assess whether different selection methods influenced retention. Other variables assessed included entrance category and age at graduation. Anonymised databases were created of all graduates from the Otago Faculty of Medicine (1999-2011) and the Auckland medical programme (2000-2012). Demographic and entry category data were recorded. Retention was defined as presence on the NZ Medical Register in December 2012. Risk differences (RD) were calculated to compare retention between the two medical programmes using the Mantel-Haenszel method. The influence of medical programme entrance category on retention was also tested. The influence of covariates on retaining graduates on the register was evaluated using a multiple logistic regression model. The postgraduate retention of graduates of the two medical programmes over 13 years was identical (Auckland 74.9%, Otago 73.6%, P=0.48). Retention of graduate and non-graduate entry students from both medical programmes was similar by 6 years after graduation. Age during medical school did not affect retention. University of attendance had no effect on postgraduation retention of students on the NZ Medical Register, suggesting that retention is not influenced by the different student selection methods at each programme. The data presented shows that New Zealand graduates regardless of programme completed show a similar profile in terms of retention.

Opinion: Making the most of colour rendition research

DOE Office of Scientific and Technical Information (OSTI.GOV)

Royer, Michael

After decades of debate, new methods for characterizing color rendition have been formalized, providing an improved system of tools to aid technology developers and lighting specifiers. Solid-state lighting, previously burdened by legacy measures based on outdated science, is positioned to take advantage of these new tools to provide tailored, efficient lighting that better meets the needs of specific architectural lighting applications. This transition requires new guidance, however, presenting an opportunity for researchers. There are several key methodological considerations specific to experiments investigating color rendition that will help build a base of guidance that can be widely applied. The importance ofmore » these ideas mostly stems from new knowledge gained in the last five years, but their origins date back much further. The spectral power distribution must be adequately varied to stress the measure(s) of color rendition being evaluated. Often, this means varying the gamut shape—the pattern of shift across different hues—to probe weaknesses of hue-averaged characterizations, avoiding misleading conclusions resulting from limited variation in the stimuli. Evaluating the role of chromaticity on color quality evaluations requires careful accommodation of chromatic adaptation to prevent a centering bias. Asking for delayed responses may be insufficient if chromaticity changes are apparent to participants, just as side-by-side viewing of different chromaticities may not produce results that can be reliably applied in the field. It is also critical that color rendition and chromaticity conditions are varied independently. The stimulus being viewed is the interaction of light and objects’ spectral reflectances. This interaction should be quantified in order to assess how derived guidelines will apply measures using standardized color sample sets. Although light source characterizations are typically used to model responses, the objects and their presentation may strongly influence evaluations. Context is important. Many factors—some investigated, others hypothesized—can influence subjective evaluations of color quality, including illuminance level, type of scene, object familiarity, color composition, viewing duration, and viewer traits. Although their influence on research results is unavoidable, the effects of these contextual factors must be carefully considered in developing guidance. Appropriate experimental design can often mitigate negative consequences arising from these considerations. At a minimum, it is crucial to understand how each of these considerations can influence experimental outcomes, as well as the interpretation and application of the results in practice. Consulting other experts prior to conducting an experiment can help ensure appropriate, up-to-date research methods will be used, so that the results will be novel and useful—and not rejected during peer review. There is an interesting feedback loop: technology development provides new research tools, which allow for refined research methods and new results that lead to more technology development. It is time to make a concerted, collective effort to improve color rendition research so that the full potential of solid-state lighting and new characterization methods can be realized, ensuring that high-efficiency, high-utility, high-appeal lighting systems become standard.« less

Influence of Operator's Experience on the Shaping Ability of Protaper Universal and Waveone Systems: A Comparative Study on Simulated Root Canals.

PubMed

Troiano, Giuseppe; Dioguardi, Mario; Cocco, Armando; Giannatempo, Giovanni; Laino, Luigi; Ciavarella, Domenico; Berutti, Elio; Lo Muzio, Lorenzo

2016-01-01

To assess the influence of operator experience on: shaping and centering ability, mean preparation time and presence of canal aberrations of ProTaper Universal and WaveOne systems on simulated root canals. Sixty S-shaped canals in resin blocks were assigned to four groups (n=15 for each group). Group1 (Experienced operator, ProTaper), Group2 (Experienced operator, WaveOne), Group3 (Inexperienced operator, ProTaper), Group4 (Inexperienced operator, WaveOne). Photographic method was used to record pre- and post-instrumentations images. After superimposition, it has been evaluated presence of canal aberrations and differences in shaping and centering ability between groups. WaveOne system produced a lower amount of canal aberrations both in the hand of expert than inexpert operators. However, a WaveOne instrument breakage occurred in the hands of an inexperienced operator. No differences have been found in the evaluation of shaping ability with both systematics. Operator's experience doesn't influence the shaping ability of ProTaper and WaveOne systems. Experience factor could influence the centering ability in the use of both the systematics. However, WaveOne Primary reduce the mean preparation time and the presence of canal aberrations.

Using a Mixed Model to Evaluate Job Satisfaction in High-Tech Industries.

PubMed

Tsai, Sang-Bing; Huang, Chih-Yao; Wang, Cheng-Kuang; Chen, Quan; Pan, Jingzhou; Wang, Ge; Wang, Jingan; Chin, Ta-Chia; Chang, Li-Chung

2016-01-01

R&D professionals are the impetus behind technological innovation, and their competitiveness and capability drive the growth of a company. However, high-tech industries have a chronic shortage of such indispensable professionals. Accordingly, reducing R&D personnel turnover has become a major human resource management challenge facing innovative companies. This study combined importance-performance analysis (IPA) with the decision-making trial and evaluation laboratory (DEMATEL) method to propose an IPA-DEMATEL model. Establishing this model involved three steps. First, an IPA was conducted to measure the importance of and satisfaction gained from job satisfaction criteria. Second, the DEMATEL method was used to determine the causal relationships of and interactive influence among the criteria. Third, a criteria model was constructed to evaluate job satisfaction of high-tech R&D personnel. On the basis of the findings, managerial suggestions are proposed.

Simulation and evaluation of rupturable coated capsules by finite element method.

PubMed

Yang, Yan; Fang, Jie; Shen, Lian; Shan, Weiguang

2017-03-15

The objective of this study was to simulate and evaluate the burst behavior of rupturable coated capsules by finite element method (FEM). Film and coated capsules were prepared by dip-coating method and their dimensions were determined by stereomicroscope. Mechanical properties of the film were measured by tensile test and used as material properties of FEM models. Swelling pressure was determined by restrained expansion method and applied to the internal surface of FEM models. Water uptake of coated capsules was determined to study the formation of internal pressure. Burst test and in vitro dissolution was used to verify the FEM models, which were used to study and predict the coating burst behavior. Simulated results of coating burst behavior were well agreed with the experiment results. Swelling pressure, material properties and dimensions of coating had influence on the maximum stress. Burst pressure and critical L-HPC content were calculated for burst prediction and formulation optimization. FEM simulation was a feasible way to simulate and evaluate the burst behavior of coated capsules. Copyright © 2017 Elsevier B.V. All rights reserved.

Judgment of Nasolabial Esthetics in Cleft Lip and Palate Is Not Influenced by Overall Facial Attractiveness.

PubMed

Kocher, Katharina; Kowalski, Piotr; Kolokitha, Olga-Elpis; Katsaros, Christos; Fudalej, Piotr S

2016-05-01

To determine whether judgment of nasolabial esthetics in cleft lip and palate (CLP) is influenced by overall facial attractiveness. Experimental study. University of Bern, Switzerland. Seventy-two fused images (36 of boys, 36 of girls) were constructed. Each image comprised (1) the nasolabial region of a treated child with complete unilateral CLP (UCLP) and (2) the external facial features, i.e., the face with masked nasolabial region, of a noncleft child. Photographs of the nasolabial region of six boys and six girls with UCLP representing a wide range of esthetic outcomes, i.e., from very good to very poor appearance, were randomly chosen from a sample of 60 consecutively treated patients in whom nasolabial esthetics had been rated in a previous study. Photographs of external facial features of six boys and six girls without UCLP with various esthetics were randomly selected from patients' files. Eight lay raters evaluated the fused images using a 100-mm visual analogue scale. Method reliability was assessed by reevaluation of fused images after >1 month. A regression model was used to analyze which elements of facial esthetics influenced the perception of nasolabial appearance. Method reliability was good. A regression analysis demonstrated that only the appearance of the nasolabial area affected the esthetic scores of fused images (coefficient = -11.44; P < .001; R(2) = 0.464). The appearance of the external facial features did not influence perceptions of fused images. Cropping facial images for assessment of nasolabial appearance in CLP seems unnecessary. Instead, esthetic evaluation can be performed on images of full faces.

SU-E-T-569: Neutron Shielding Calculation Using Analytical and Multi-Monte Carlo Method for Proton Therapy Facility

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cho, S; Shin, E H; Kim, J

2015-06-15

Purpose: To evaluate the shielding wall design to protect patients, staff and member of the general public for secondary neutron using a simply analytic solution, multi-Monte Carlo code MCNPX, ANISN and FLUKA. Methods: An analytical and multi-Monte Carlo method were calculated for proton facility (Sumitomo Heavy Industry Ltd.) at Samsung Medical Center in Korea. The NCRP-144 analytical evaluation methods, which produced conservative estimates on the dose equivalent values for the shielding, were used for analytical evaluations. Then, the radiation transport was simulated with the multi-Monte Carlo code. The neutron dose at evaluation point is got by the value using themore » production of the simulation value and the neutron dose coefficient introduced in ICRP-74. Results: The evaluation points of accelerator control room and control room entrance are mainly influenced by the point of the proton beam loss. So the neutron dose equivalent of accelerator control room for evaluation point is 0.651, 1.530, 0.912, 0.943 mSv/yr and the entrance of cyclotron room is 0.465, 0.790, 0.522, 0.453 mSv/yr with calculation by the method of NCRP-144 formalism, ANISN, FLUKA and MCNP, respectively. The most of Result of MCNPX and FLUKA using the complicated geometry showed smaller values than Result of ANISN. Conclusion: The neutron shielding for a proton therapy facility has been evaluated by the analytic model and multi-Monte Carlo methods. We confirmed that the setting of shielding was located in well accessible area to people when the proton facility is operated.« less

‘A good method of quitting smoking’ or ‘just an alternative to smoking’? Comparative evaluations of e-cigarette and traditional cigarette usage by dual users

PubMed Central

Vandrevala, Tushna; Coyle, Adrian; Walker, Victoria; Cabrera Torres, Joshelyn; Ordoña, Izobel; Rahman, Panna

2017-01-01

The development of e-cigarettes was initially hailed as a resource in facilitating a reduction in or cessation of cigarette smoking. Many users of e-cigarettes are ‘dual users’, smoking traditional cigarettes and e-cigarettes. The present qualitative study examines the factors that a group of 20 dual users considered to have been influential in their decisions to use e-cigarettes and their comparative evaluations of e-cigarettes and traditional cigarettes. Health concerns were not found to be sole motivators. Participants pointed to financial and contextual considerations, particularly peer influence on uptake and continued usage of e-cigarettes. E-cigarettes were evaluated as comparable to cigarettes in some ways but not in other important respects such as sensation and satisfaction. Different social evaluations of cigarette and e-cigarette usage were discerned which influenced how participants identified as smokers, ‘vapers’ or neither. Findings are discussed in relation to social representations, identity and implications for continued e-cigarette usage among dual users. PMID:28680694

'A good method of quitting smoking' or 'just an alternative to smoking'? Comparative evaluations of e-cigarette and traditional cigarette usage by dual users.

PubMed

Vandrevala, Tushna; Coyle, Adrian; Walker, Victoria; Cabrera Torres, Joshelyn; Ordoña, Izobel; Rahman, Panna

2017-01-01

The development of e-cigarettes was initially hailed as a resource in facilitating a reduction in or cessation of cigarette smoking. Many users of e-cigarettes are 'dual users', smoking traditional cigarettes and e-cigarettes. The present qualitative study examines the factors that a group of 20 dual users considered to have been influential in their decisions to use e-cigarettes and their comparative evaluations of e-cigarettes and traditional cigarettes. Health concerns were not found to be sole motivators. Participants pointed to financial and contextual considerations, particularly peer influence on uptake and continued usage of e-cigarettes. E-cigarettes were evaluated as comparable to cigarettes in some ways but not in other important respects such as sensation and satisfaction. Different social evaluations of cigarette and e-cigarette usage were discerned which influenced how participants identified as smokers, 'vapers' or neither. Findings are discussed in relation to social representations, identity and implications for continued e-cigarette usage among dual users.

A novel dysregulated pathway-identification analysis based on global influence of within-pathway effects and crosstalk between pathways

PubMed Central

Han, Junwei; Li, Chunquan; Yang, Haixiu; Xu, Yanjun; Zhang, Chunlong; Ma, Jiquan; Shi, Xinrui; Liu, Wei; Shang, Desi; Yao, Qianlan; Zhang, Yunpeng; Su, Fei; Feng, Li; Li, Xia

2015-01-01

Identifying dysregulated pathways from high-throughput experimental data in order to infer underlying biological insights is an important task. Current pathway-identification methods focus on single pathways in isolation; however, consideration of crosstalk between pathways could improve our understanding of alterations in biological states. We propose a novel method of pathway analysis based on global influence (PAGI) to identify dysregulated pathways, by considering both within-pathway effects and crosstalk between pathways. We constructed a global gene–gene network based on the relationships among genes extracted from a pathway database. We then evaluated the extent of differential expression for each gene, and mapped them to the global network. The random walk with restart algorithm was used to calculate the extent of genes affected by global influence. Finally, we used cumulative distribution functions to determine the significance values of the dysregulated pathways. We applied the PAGI method to five cancer microarray datasets, and compared our results with gene set enrichment analysis and five other methods. Based on these analyses, we demonstrated that PAGI can effectively identify dysregulated pathways associated with cancer, with strong reproducibility and robustness. We implemented PAGI using the freely available R-based and Web-based tools (http://bioinfo.hrbmu.edu.cn/PAGI). PMID:25551156

Corrosion resistance of premodeled wires made of stainless steel used for heart electrotherapy leaders

NASA Astrophysics Data System (ADS)

Przondziono, J.; Walke, W.; Młynarski, R.; Szatka, W.

2012-05-01

The purpose of the study is to evaluate resistance to electrochemical corrosion of wire made of X10CrNi18-8 stainless steel designed for use in cardiology treatment. The influence of strain formed in the premodeling process and methods of wire surface preparation to corrosive resistance in artificial plasma solution were analysed. Wire corrosion tests were carried out in the solution of artificial plasma. Resistance to electrochemical corrosion was evaluated on the ground of recorded curves of anodic polarization by means of potentiodynamic method. Potentiodynamic tests carried out enabled to determine how the resistance to pitting corrosion of wire changes, depending on strain formed in the premodeling process as well as on the method of wire surface preparation. For evaluation of phenomena occurring on the surface of tested steel, electrochemical impedance spectroscopy (EIS) was applied. Deterioration of corrosive properties of wire along with the increase in the formed strain hardening was observed.

[Land use and land cover charnge (LUCC) and landscape service: Evaluation, mapping and modeling].

PubMed

Song, Zhang-jian; Cao, Yu; Tan, Yong-zhong; Chen, Xiao-dong; Chen, Xian-peng

2015-05-01

Studies on ecosystem service from landscape scale aspect have received increasing attention from researchers all over the world. Compared with ecosystem scale, it should be more suitable to explore the influence of human activities on land use and land cover change (LUCC), and to interpret the mechanisms and processes of sustainable landscape dynamics on landscape scale. Based on comprehensive and systematic analysis of researches on landscape service, this paper firstly discussed basic concepts and classification of landscape service. Then, methods of evaluation, mapping and modeling of landscape service were analyzed and concluded. Finally, future trends for the research on landscape service were proposed. It was put forward that, exploring further connotation and classification system of landscape service, improving methods and quantitative indicators for evaluation, mapping and modelling of landscape service, carrying out long-term integrated researches on landscape pattern-process-service-scale relationships and enhancing the applications of theories and methods on landscape economics and landscape ecology are very important fields of the research on landscape service in future.

Adaptive Diffeomorphic Multiresolution Demons and Their Application to Same Modality Medical Image Registration with Large Deformation

PubMed Central

Wang, Chang; Ren, Qiongqiong; Qin, Xin

2018-01-01

Diffeomorphic demons can guarantee smooth and reversible deformation and avoid unreasonable deformation. However, the number of iterations needs to be set manually, and this greatly influences the registration result. In order to solve this problem, we proposed adaptive diffeomorphic multiresolution demons in this paper. We used an optimized framework with nonrigid registration and diffeomorphism strategy, designed a similarity energy function based on grey value, and stopped iterations adaptively. This method was tested by synthetic image and same modality medical image. Large deformation was simulated by rotational distortion and extrusion transform, medical image registration with large deformation was performed, and quantitative analyses were conducted using the registration evaluation indexes, and the influence of different driving forces and parameters on the registration result was analyzed. The registration results of same modality medical images were compared with those obtained using active demons, additive demons, and diffeomorphic demons. Quantitative analyses showed that the proposed method's normalized cross-correlation coefficient and structural similarity were the highest and mean square error was the lowest. Medical image registration with large deformation could be performed successfully; evaluation indexes remained stable with an increase in deformation strength. The proposed method is effective and robust, and it can be applied to nonrigid registration of same modality medical images with large deformation.

Adaptive Diffeomorphic Multiresolution Demons and Their Application to Same Modality Medical Image Registration with Large Deformation.

PubMed

Wang, Chang; Ren, Qiongqiong; Qin, Xin; Yu, Yi

2018-01-01

Diffeomorphic demons can guarantee smooth and reversible deformation and avoid unreasonable deformation. However, the number of iterations needs to be set manually, and this greatly influences the registration result. In order to solve this problem, we proposed adaptive diffeomorphic multiresolution demons in this paper. We used an optimized framework with nonrigid registration and diffeomorphism strategy, designed a similarity energy function based on grey value, and stopped iterations adaptively. This method was tested by synthetic image and same modality medical image. Large deformation was simulated by rotational distortion and extrusion transform, medical image registration with large deformation was performed, and quantitative analyses were conducted using the registration evaluation indexes, and the influence of different driving forces and parameters on the registration result was analyzed. The registration results of same modality medical images were compared with those obtained using active demons, additive demons, and diffeomorphic demons. Quantitative analyses showed that the proposed method's normalized cross-correlation coefficient and structural similarity were the highest and mean square error was the lowest. Medical image registration with large deformation could be performed successfully; evaluation indexes remained stable with an increase in deformation strength. The proposed method is effective and robust, and it can be applied to nonrigid registration of same modality medical images with large deformation.

Ecological outcomes and evaluation of success in passively restored southeastern depressional wetlands.

DOE Office of Scientific and Technical Information (OSTI.GOV)

De Steven, Diane; Sharitz, Rebecca R.; Barton, Christopher, D.

Abstract: Depressional wetlands may be restored passively by disrupting prior drainage to recover original hydrology and relying on natural revegetation. Restored hydrology selects for wetland vegetation; however, depression geomorphology constrains the achievable hydroperiod, and plant communities are influenced by hydroperiod and available species pools. Such constraints can complicate assessments of restoration success. Sixteen drained depressions in South Carolina, USA, were restored experimentally by forest clearing and ditch plugging for potential crediting to a mitigation bank. Depressions were assigned to alternate revegetation methods representing desired targets of herbaceous and wet-forest communities. After five years, restoration progress and revegetation methods were evaluated.more » Restored hydroperiods differed among wetlands, but all sites developed diverse vegetation of native wetland species. Vegetation traits were influenced by hydroperiod and the effects of early drought, rather than by revegetation method. For mitigation banking, individual wetlands were assessed for improvement from pre-restoration condition and similarity to assigned reference type. Most wetlands met goals to increase hydroperiod, herb-species dominance, and wetland-plant composition. Fewer wetlands achieved equivalence to reference types because some vegetation targets were incompatible with depression hydroperiods and improbable without intensive management. The results illustrated a paradox in judging success when vegetation goals may be unsuited to system constraints.« less

Unified framework to evaluate panmixia and migration direction among multiple sampling locations.

PubMed

Beerli, Peter; Palczewski, Michal

2010-05-01

For many biological investigations, groups of individuals are genetically sampled from several geographic locations. These sampling locations often do not reflect the genetic population structure. We describe a framework using marginal likelihoods to compare and order structured population models, such as testing whether the sampling locations belong to the same randomly mating population or comparing unidirectional and multidirectional gene flow models. In the context of inferences employing Markov chain Monte Carlo methods, the accuracy of the marginal likelihoods depends heavily on the approximation method used to calculate the marginal likelihood. Two methods, modified thermodynamic integration and a stabilized harmonic mean estimator, are compared. With finite Markov chain Monte Carlo run lengths, the harmonic mean estimator may not be consistent. Thermodynamic integration, in contrast, delivers considerably better estimates of the marginal likelihood. The choice of prior distributions does not influence the order and choice of the better models when the marginal likelihood is estimated using thermodynamic integration, whereas with the harmonic mean estimator the influence of the prior is pronounced and the order of the models changes. The approximation of marginal likelihood using thermodynamic integration in MIGRATE allows the evaluation of complex population genetic models, not only of whether sampling locations belong to a single panmictic population, but also of competing complex structured population models.

An internal reference model-based PRF temperature mapping method with Cramer-Rao lower bound noise performance analysis.

PubMed

Li, Cheng; Pan, Xinyi; Ying, Kui; Zhang, Qiang; An, Jing; Weng, Dehe; Qin, Wen; Li, Kuncheng

2009-11-01

The conventional phase difference method for MR thermometry suffers from disturbances caused by the presence of lipid protons, motion-induced error, and field drift. A signal model is presented with multi-echo gradient echo (GRE) sequence using a fat signal as an internal reference to overcome these problems. The internal reference signal model is fit to the water and fat signals by the extended Prony algorithm and the Levenberg-Marquardt algorithm to estimate the chemical shifts between water and fat which contain temperature information. A noise analysis of the signal model was conducted using the Cramer-Rao lower bound to evaluate the noise performance of various algorithms, the effects of imaging parameters, and the influence of the water:fat signal ratio in a sample on the temperature estimate. Comparison of the calculated temperature map and thermocouple temperature measurements shows that the maximum temperature estimation error is 0.614 degrees C, with a standard deviation of 0.06 degrees C, confirming the feasibility of this model-based temperature mapping method. The influence of sample water:fat signal ratio on the accuracy of the temperature estimate is evaluated in a water-fat mixed phantom experiment with an optimal ratio of approximately 0.66:1. (c) 2009 Wiley-Liss, Inc.

Frequency of data extraction errors and methods to increase data extraction quality: a methodological review.

PubMed

Mathes, Tim; Klaßen, Pauline; Pieper, Dawid

2017-11-28

Our objective was to assess the frequency of data extraction errors and its potential impact on results in systematic reviews. Furthermore, we evaluated the effect of different extraction methods, reviewer characteristics and reviewer training on error rates and results. We performed a systematic review of methodological literature in PubMed, Cochrane methodological registry, and by manual searches (12/2016). Studies were selected by two reviewers independently. Data were extracted in standardized tables by one reviewer and verified by a second. The analysis included six studies; four studies on extraction error frequency, one study comparing different reviewer extraction methods and two studies comparing different reviewer characteristics. We did not find a study on reviewer training. There was a high rate of extraction errors (up to 50%). Errors often had an influence on effect estimates. Different data extraction methods and reviewer characteristics had moderate effect on extraction error rates and effect estimates. The evidence base for established standards of data extraction seems weak despite the high prevalence of extraction errors. More comparative studies are needed to get deeper insights into the influence of different extraction methods.

Methods for reducing energy dissipation in cosmetic gloves.

PubMed

Herder, J L; Cool, J C; Plettenburg, D H

1998-06-01

For cosmetic reasons, hand prostheses are provided with cosmetic gloves. Their pleasing appearance, however, is accompanied by poor mechanical behavior, resulting in a negative influence on prosthesis operation. Glove stiffness is high and nonlinear, and internal friction in the glove material causes energy dissipation (hysteresis). In this article, two methods for reducing hysteresis in cosmetic gloves are proposed, that may be applied independently or in combination. Glove modification. Altering the mechanical properties of the glove itself is the first method that is presented. It was found possible to reduce both stiffness and hysteresis about 50% by forming grooves into the inside of the glove. Together with the evaluation of this method, several properties of the cosmetic glove were determined. Motion optimization. Additionally, a second method for reducing hysteresis was developed. The amount of hysteresis is influenced by the way the glove is forced to deform. The prosthesis mechanism, determining this deformation, was designed for minimum hysteresis and maximum cosmesis. For the prosthesis-glove combination used in this study, thumb motion optimization reduced hysteresis by about 65%.

Knowledge-attitude-practice survey among Portuguese gynaecologists regarding combined hormonal contraceptives methods.

PubMed

Bombas, Teresa; Costa, Ana Rosa; Palma, Fátima; Vicente, Lisa; Sá, José Luís; Nogueira, Ana Maria; Andrade, Sofia

2012-04-01

ABSTRACT Objectives To evaluate knowledge, attitude and practices of Portuguese gynaecologists regarding combined hormonal contraceptives. Methods A cross-sectional survey was conducted among 303 gynaecologists. Results Ninety percent of the gynaecologists considered that deciding on contraceptive methods is a process wherein the woman has her say. Efficacy, safety and the woman's preference were the major factors influencing gynaecologists, while efficacy, tolerability and ease of use were the major factors perceived by the specialists to influence the women's choice. Gynaecologists believed that only 2% of women taking the pill were 100% compliant compared to 48% of those using the patch and 75% of those using the ring. The lower risk of omission was the strong point for the latter methods. Side effects were the main reason to change to another method. Vaginal manipulation was the most difficult topic to discuss. Conclusions Most gynaecologists decided with the woman on the contraceptive method. The main reasons for the gynaecologist's recommendation of a given contraceptive method and the women's choice were different. Counselling implies an open discussion and topics related to sexuality were considered difficult to discuss. Improving communication skills and understanding women's requirements are critical for contraceptive counselling.

Comparative methods to assess harmonic response of nonlinear piezoelectric energy harvesters interfaced with AC and DC circuits

NASA Astrophysics Data System (ADS)

Lan, Chunbo; Tang, Lihua; Harne, Ryan L.

2018-05-01

Nonlinear piezoelectric energy harvester (PEH) has been widely investigated during the past few years. Among the majority of these researches, a pure resistive load is used to evaluate power output. To power conventional electronics in practical application, the alternating current (AC) generated by nonlinear PEH needs to be transformed into a direct current (DC) and rectifying circuits are required to interface the device and electronic load. This paper aims at exploring the critical influences of AC and DC interface circuits on nonlinear PEH. As a representative nonlinear PEH, we fabricate and evaluate a monostable PEH in terms of generated power and useful operating bandwidth when it is connected to AC and DC interface circuits. Firstly, the harmonic balance analysis and equivalent circuit representation method are utilized to tackle the modeling of nonlinear energy harvesters connected to AC and DC interface circuits. The performances of the monostable PEH connected to these interface circuits are then analyzed and compared, focusing on the influences of the varying load, excitation and electromechanical coupling strength on the nonlinear dynamics, bandwidth and harvested power. Subsequently, the behaviors of the monostable PEH with AC and DC interface circuits are verified by experiment. Results indicate that both AC and DC interface circuits have a peculiar influence on the power peak shifting and operational bandwidth of the monostable PEH, which is quite different from that on the linear PEH.

Cross-Sectional Elasticity Imaging of Arterial Wall by Comparing Measured Change in Thickness with Model Waveform

NASA Astrophysics Data System (ADS)

Tang, Jiang; Hasegawa, Hideyuki; Kanai, Hiroshi

2005-06-01

For the assessment of the elasticity of the arterial wall, we have developed the phased tracking method [H. Kanai et al.: IEEE Trans. Ultrason. Ferroelectr. Freq. Control 43 (1996) 791] for measuring the minute change in thickness due to heartbeats and the elasticity of the arterial wall with transcutaneous ultrasound. For various reasons, for example, an extremely small deformation of the wall, the minute change in wall thickness during one heartbeat is largely influenced by noise in these cases and the reliability of the elasticity distribution obtained from the maximum change in thickness deteriorates because the maximum value estimation is largely influenced by noise. To obtain a more reliable cross-sectional image of the elasticity of the arterial wall, in this paper, a matching method is proposed to evaluate the waveform of the measured change in wall thickness by comparing the measured waveform with a template waveform. The maximum deformation, which is used in the calculation of elasticity, was determined from the amplitude of the matched model waveform to reduce the influence of noise. The matched model waveform was obtained by minimizing the difference between the measured and template waveforms. Furthermore, a random error, which was obtained from the reproducibility among the heartbeats of the measured waveform, was considered useful for the evaluation of the reliability of the measured waveform.

[Association of job burnout with subjective well-being and health status among employees from 29 provinces in China].

PubMed

Xu, C J; Xiao, Y; Pan, N; Ye, J; Lin, Q X; Jin, Y

2017-10-20

Objective: To investigate the influence of job burnout on subjective well-being and health status among employees in China. Methods: The data from the 2014 China Labor-force Dynamic Survey were used to analyze the association of job burnout with subjective well-being and health status among 7289 employees aged 18-64 years from 29 provinces in China.Some items from the Maslach Burnout Inventory-General Survey were used to investigate job burnout; subjective well-being assessment included life happiness and degree of satisfaction with living condition; the questions for self-evaluation of health status were used to analyze health status. Results: Of all employees,30.5% had low subjective well-being and 4.7% had poor health status based on self-evaluation. The logistic regression analysis showed that emotional exhaustion(two items), reduced sense of personal accomplishment,and cynicism were risk factors for low subjective well-being( OR =1.07,1.11,1.10,and 1.06, P <0.001),and emotional exhaustion(two items)was a risk factor for poor health status ( OR =1.10 and 1.07, P <0.001).Reduced sense of personal accomplishment and cynicism had no significant influence on health status( P >0.05). Conclusion: Emotional exhaustion is a major influencing factor for health status,and reducing job burnout may be an effective method for improving subjective well-being and health status.

Marginal and Internal Adaptation of Zirconia Crowns: A Comparative Study of Assessment Methods.

PubMed

Cunali, Rafael Schlögel; Saab, Rafaella Caramori; Correr, Gisele Maria; Cunha, Leonardo Fernandes da; Ornaghi, Bárbara Pick; Ritter, André V; Gonzaga, Carla Castiglia

2017-01-01

Marginal and internal adaptation is critical for the success of indirect restorations. New imaging systems make it possible to evaluate these parameters with precision and non-destructively. This study evaluated the marginal and internal adaptation of zirconia copings fabricated with two different systems using both silicone replica and microcomputed tomography (micro-CT) assessment methods. A metal master model, representing a preparation for an all-ceramic full crown, was digitally scanned and polycrystalline zirconia copings were fabricated with either Ceramill Zi (Amann-Girrbach) or inCoris Zi (Dentslpy-Sirona), n=10. For each coping, marginal and internal gaps were evaluated by silicone replica and micro-CT assessment methods. Four assessment points of each replica cross-section and micro-CT image were evaluated using imaging software: marginal gap (MG), axial wall (AW), axio-occlusal angle (AO) and mid-occlusal wall (MO). Data were statistically analyzed by factorial ANOVA and Tukey test (a=0.05). There was no statistically significant difference between the methods for MG and AW. For AO, there were significant differences between methods for Amann copings, while for Dentsply-Sirona copings similar values were observed. For MO, both methods presented statistically significant differences. A positive correlation was observed determined by the two assessment methods for MG values. In conclusion, the assessment method influenced the evaluation of marginal and internal adaptation of zirconia copings. Micro-CT showed lower marginal and internal gap values when compared to the silicone replica technique, although the difference was not always statistically significant. Marginal gap and axial wall assessment points showed the lower gap values, regardless of ceramic system and assessment method used.

An Alternate Route to Policy Influence: How Evaluations Affect D.A.R.E.

ERIC Educational Resources Information Center

Weiss, Carol Hirschon; Murphy-Graham, Erin; Birkeland, Sarah

2005-01-01

Investigators of the influence of evaluations on policy decisions have noted three main routes to influence: instrumental, conceptual, and political/symbolic. This study, an inquiry into the effect of evaluations of the Drug Abuse Resistance Education (D.A.R.E.) program, found a fourth main way that evaluations exert an influence: imposed use. The…

Validation of RNAi Silencing Efficiency Using Gene Array Data shows 18.5% Failure Rate across 429 Independent Experiments.

PubMed

Munkácsy, Gyöngyi; Sztupinszki, Zsófia; Herman, Péter; Bán, Bence; Pénzváltó, Zsófia; Szarvas, Nóra; Győrffy, Balázs

2016-09-27

No independent cross-validation of success rate for studies utilizing small interfering RNA (siRNA) for gene silencing has been completed before. To assess the influence of experimental parameters like cell line, transfection technique, validation method, and type of control, we have to validate these in a large set of studies. We utilized gene chip data published for siRNA experiments to assess success rate and to compare methods used in these experiments. We searched NCBI GEO for samples with whole transcriptome analysis before and after gene silencing and evaluated the efficiency for the target and off-target genes using the array-based expression data. Wilcoxon signed-rank test was used to assess silencing efficacy and Kruskal-Wallis tests and Spearman rank correlation were used to evaluate study parameters. All together 1,643 samples representing 429 experiments published in 207 studies were evaluated. The fold change (FC) of down-regulation of the target gene was above 0.7 in 18.5% and was above 0.5 in 38.7% of experiments. Silencing efficiency was lowest in MCF7 and highest in SW480 cells (FC = 0.59 and FC = 0.30, respectively, P = 9.3E-06). Studies utilizing Western blot for validation performed better than those with quantitative polymerase chain reaction (qPCR) or microarray (FC = 0.43, FC = 0.47, and FC = 0.55, respectively, P = 2.8E-04). There was no correlation between type of control, transfection method, publication year, and silencing efficiency. Although gene silencing is a robust feature successfully cross-validated in the majority of experiments, efficiency remained insufficient in a significant proportion of studies. Selection of cell line model and validation method had the highest influence on silencing proficiency.

How has problem based learning fared in Pakistan?

PubMed

Mahmud, Waqas; Hyder, Omar

2012-10-01

To conduct a systematic review of primary research in undergraduate medical education in Pakistan in order to evaluate PBL programs, examine outcomes and competencies influenced by PBL, and compare them with conventional learning (lecture based learning, LBL). Qualitative content analysis. Rawalpindi Medical College, Rawalpindi, from June 2010 - February 2011. Literature was searched using online resources. Studies evaluating outcomes influenced by PBL, or comparing PBL with lecture based learning (LBL) were selected. Due to heterogeneity, a qualitative content analysis was performed in which studies were classified according to the methods of assessment; results were then summarized by outcome and frequencies were calculated. Eleven studies were included. Apart from knowledge acquisition, students gave high ratings to PBL in selected outcomes, alone, and in comparison with LBL. There was a disagreement among results of studies that evaluated knowledge acquisition alone. Based on student perceptions, PBL has many advantages. However, the results of this review are limited due to heterogeneity and methodological weakness of studies, specially the studies that compared exam scores to assess knowledge acquisition.

Influence of stressful life events on the onset of sarcoidosis.

PubMed

Yamada, Yoshihito; Tatsumi, Koichiro; Yamaguchi, Tetsuo; Tanabe, Nobuhiro; Takiguchi, Yuichi; Kuriyama, Takayuki; Mikami, Riichiro

2003-06-01

The onset of sarcoidosis may be triggered by any hereditary and/or environmental factor. Among these factors, psychosocial stress may play a critical role in the onset of sarcoidosis. The aim of the present study was to evaluate the influence of stressful life events on the onset of sarcoidosis. The social and/or life events experienced prior to diagnosis in 55 patients with sarcoidosis, were evaluated quantitatively using the Social Readjustment Rating Scale (SRRS), the most authoritative method to quantify the magnitude of the events requiring changes in lifestyle. In addition, personality with respect to stress-reactivity was simultaneously evaluated using the Minnesota Multiphasic Personality Inventory (MMPI) alexithymia scale. Both the degree of stress, evaluated by SRRS, and stress-reactivity, evaluated by MMPI scale, of sarcoidosis patients were compared with those of 92 healthy controls. The magnitude of stressful life events was significantly higher in patients with sarcoidosis compared with healthy controls. In addition, capacity for coping with stress was found to be inferior in sarcoidosis patients compared with that in the control groups. These results indicated that psychosocial stress assessed on the basis of alexithymic characteristics of the self perception of stress may be partly implicated in the development of sarcoidosis.

Quality of protection evaluation of security mechanisms.

PubMed

Ksiezopolski, Bogdan; Zurek, Tomasz; Mokkas, Michail

2014-01-01

Recent research indicates that during the design of teleinformatic system the tradeoff between the systems performance and the system protection should be made. The traditional approach assumes that the best way is to apply the strongest possible security measures. Unfortunately, the overestimation of security measures can lead to the unreasonable increase of system load. This is especially important in multimedia systems where the performance has critical character. In many cases determination of the required level of protection and adjustment of some security measures to these requirements increase system efficiency. Such an approach is achieved by means of the quality of protection models where the security measures are evaluated according to their influence on the system security. In the paper, we propose a model for QoP evaluation of security mechanisms. Owing to this model, one can quantify the influence of particular security mechanisms on ensuring security attributes. The methodology of our model preparation is described and based on it the case study analysis is presented. We support our method by the tool where the models can be defined and QoP evaluation can be performed. Finally, we have modelled TLS cryptographic protocol and presented the QoP security mechanisms evaluation for the selected versions of this protocol.

The use of the nominal group technique as an evaluative tool in medical undergraduate education.

PubMed

Lloyd-Jones, G; Fowell, S; Bligh, J G

1999-01-01

In the present state of flux affecting UK medical undergraduate education, there is a pressing need for evaluative methods which will identify relevant outcomes both expected and unanticipated. The student perspective is now legitimately accepted to form part of any evaluative exercise but qualitative methods commonly used for this purpose are expensive in time and analytical skills. The nominal group technique (NGT) has been used for various purposes, including course evaluation, and appears well suited to this application. It combines qualitative and quantitative components in a structured interaction, which minimizes the influences of the researcher, and of group dynamics. The sequence and mechanics of the NGT process are described as applied to an end of first year evaluation in a novel undergraduate course. Doubts have been raised as to whether the results of NGT can be generalized to the larger group. In this paper, this problem is overcome by compiling a questionnaire based on the NGT items which was distributed throughout the class. Nominal group technique with questionnaire development. The medical school at The University of Liverpool. Medical students. Previous claims made on behalf of the NGT, such as the focus on the student voice, the minimizing of leadership influence and the richness of the data, are upheld in this report. Broad agreement was found with the NGT items but two items (10%) did not display any consensus. The questionnaire extension of the NGT provides back-up evidence of the reliability of the data derived from the technique and enables it to be applied to the larger groups typical of undergraduate medicine.

Mixed methods evaluation of the Getting it Right First Time programme - improvements to NHS orthopaedic care in England: study protocol.

PubMed

Barratt, Helen; Turner, Simon; Hutchings, Andrew; Pizzo, Elena; Hudson, Emma; Briggs, Tim; Hurd, Rob; Day, Jamie; Yates, Rachel; Gikas, Panagiotis; Morris, Stephen; Fulop, Naomi J; Raine, Rosalind

2017-01-23

Orthopaedic procedures, such as total hip replacement and total knee replacement, are among the commonest surgical procedures in England. The Getting it Right First Time project (GIRFT) aims to deliver improvements in quality and reductions in the cost of NHS orthopaedic care across the country. We will examine whether the planned changes have delivered improvements in the quality of care and patient outcomes. We will also study the processes involved in developing and implementing changes to care, and professional and organisational factors influencing these processes. In doing so, we will identify lessons to guide future improvement work in other services. We will evaluate the implementation of the GIRFT programme, and its impact on outcomes and cost, using a mixed methods design. Qualitative methods will be used to understand the programme theory underlying the approach and study the effect of the intervention on practice, using a case study approach. This will include an analysis of the central GIRFT programme and local provider responses. Data will be collected via semi-structured interviews, non-participant observation, and documentary analysis. Quantitative methods will be used to examine 'what works and at what cost?' We will also conduct focus groups with patients and members of the public to explore their perceptions of the GIRFT programme. The research will draw on theories of adoption, diffusion, and sustainability of innovation; its characteristics; and contextual factors at provider-level that influence implementation. We will identify generalisable lessons to inform the organisation and delivery of future improvement programmes, to optimise their implementation and impact, both within the UK and internationally. Potential challenges involved in conducting the evaluation include the phased implementation of the intervention in different provider organisations; the inclusion of both retrospective and prospective components; and the effects of ongoing organisational turbulence in the English NHS. However, these issues reflect the realities of service change and its evaluation.

[Comparative sensitivity of different solid-phase immunoassays for detecting HBsAg and anti-HCV in blood].

PubMed

León, P; López, J A; Domingo, C J; Echevarría, J M

1992-10-01

The sensitivities of seven methods of enzyme-immunoassay for HBsAg detection, as well as of twelve immunoassays for detecting antibody to HCV, were compared, in an attempt to evaluate the need for an official technical validation of such methods prior to its commercialization in Spain. Significant differences were seen for the sensitivities of these methods, which may influence the proficiency of blood bank screening for HBsAg and anti-HCV for preventing cases of post-transfusional viral hepatitis. As a conclusion, it is recommended to establish legal regulations for pre-marketing validation of such assays in Spain, as well as to take the results obtained in these evaluation studies as the basis for selecting those tests which may be more convenient for screening purposes at the blood banks.

Qualitative and quantitative evaluation of the genomic DNA extracted from GMO and non-GMO foodstuffs with four different extraction methods.

PubMed

Peano, Clelia; Samson, Maria Cristina; Palmieri, Luisa; Gulli, Mariolina; Marmiroli, Nelson

2004-11-17

The presence of DNA in foodstuffs derived from or containing genetically modified organisms (GMO) is the basic requirement for labeling of GMO foods in Council Directive 2001/18/CE (Off. J. Eur. Communities 2001, L1 06/2). In this work, four different methods for DNA extraction were evaluated and compared. To rank the different methods, the quality and quantity of DNA extracted from standards, containing known percentages of GMO material and from different food products, were considered. The food products analyzed derived from both soybean and maize and were chosen on the basis of the mechanical, technological, and chemical treatment they had been subjected to during processing. Degree of DNA degradation at various stages of food production was evaluated through the amplification of different DNA fragments belonging to the endogenous genes of both maize and soybean. Genomic DNA was extracted from Roundup Ready soybean and maize MON810 standard flours, according to four different methods, and quantified by real-time Polymerase Chain Reaction (PCR), with the aim of determining the influence of the extraction methods on the DNA quantification through real-time PCR.

Studies on Application of Aroma Finish on Silk Fabric

NASA Astrophysics Data System (ADS)

Hipparagi, Sanganna Aminappa; Srinivasa, Thirumalappa; Das, Brojeswari; Naik, Subhas Venkatappa; Purushotham, Serampur Parappa

2016-10-01

Aromatic treatments on textiles have gained importance in the recent years. In the present article work has been done on fragrance finish application on silk material. Silk is an expensive natural fibre used for apparel purpose and known for its feel and appeal. Incorporation of fragrance material in silk product, will add more value to it. Present work focuses to impart durable aroma finish for silk products to be home washed or subjected to dry cleaning. Microencapsulated aroma chemical has been used for the treatment. Impregnation method, Exhaust method, Dip-Pad-Dry method and Spray method have been used to see the influence of application method on the uptake and performance. Evaluation of the aroma treated material has been done through subjective evaluation as per Odor Intensity Reference Scaling (OIRS). Effect of the aroma finishing on the physical properties of the fabric has also been studied. No adverse effect has been observed on the stiffness of the fabric after the aroma treatment.

ASSESSING AND COMBINING RELIABILITY OF PROTEIN INTERACTION SOURCES

PubMed Central

LEACH, SONIA; GABOW, AARON; HUNTER, LAWRENCE; GOLDBERG, DEBRA S.

2008-01-01

Integrating diverse sources of interaction information to create protein networks requires strategies sensitive to differences in accuracy and coverage of each source. Previous integration approaches calculate reliabilities of protein interaction information sources based on congruity to a designated ‘gold standard.’ In this paper, we provide a comparison of the two most popular existing approaches and propose a novel alternative for assessing reliabilities which does not require a gold standard. We identify a new method for combining the resultant reliabilities and compare it against an existing method. Further, we propose an extrinsic approach to evaluation of reliability estimates, considering their influence on the downstream tasks of inferring protein function and learning regulatory networks from expression data. Results using this evaluation method show 1) our method for reliability estimation is an attractive alternative to those requiring a gold standard and 2) the new method for combining reliabilities is less sensitive to noise in reliability assignments than the similar existing technique. PMID:17990508

Assessment of the Pozzolanic Activity of a Spent Catalyst by Conductivity Measurement of Aqueous Suspensions with Calcium Hydroxide

PubMed Central

Velázquez, Sergio; Monzó, José M.; Borrachero, María V.; Payá, Jordi

2014-01-01

The pozzolanic activity of the spent catalyst produced by fluid catalytic cracking (FCC) has been studied by various methods in recent years. However, no quick and easy method has been reported for this activity based on the associated studies. In this work, the pozzolanic activity of a spent catalyst was investigated by measuring its electrical conductivity in aqueous suspensions of pozzolan/calcium hydroxide. The behavior of the FCC catalyst residue was compared to that of reactive and inert materials of similar chemical compositions. Further, the influence of temperature on the suspension was studied, and also, a new method was proposed in which the pozzolan/calcium hydroxide ratio was varied (with the initial presence of solid Ca(OH)2 in the system). It was concluded that the method is effective, fast and simple for evaluating the high reactivity of the catalyst. Therefore, this method is an alternative for the evaluation of the reactivity of pozzolanic materials. PMID:28788583

Evaluation of different heating methods for the detection of boar taint by means of the human nose.

PubMed

Bekaert, K M; Aluwé, M; Vanhaecke, L; Heres, L; Duchateau, L; Vandendriessche, F; Tuyttens, F A M

2013-05-01

No automated detection system for boar taint detection is currently available, thus boar taint at the slaughterline can currently only be assessed using the singeing method (olfactory scoring). This study compares several heating methods (microwave, soldering iron and pyropen) and evaluates the effect of habituation, cleaning the soldering iron, singeing the fat twice in the same place, and variations in the technical procedures. All methods seem to be suitable for detecting boar taint but the choice of heating method for sensory scoring of boar taint depends on habituation of the trained assessor and specific conditions applied. The pyropen seems to be most suitable because it does not contact the fat and is easy to handle (wireless). Finally, the intensity score may also be influenced by: contamination from not cleaning the soldering iron, singeing the fat twice in the same place, and the effect of habituation. Copyright © 2013 Elsevier Ltd. All rights reserved.

Culture and Influence in Multisite Evaluation

ERIC Educational Resources Information Center

Kirkhart, Karen E.

2011-01-01

Understanding the influence of multisite evaluation requires careful consideration of cultural context. The author illustrates dimensions of influence and culture with excerpts from four National Science Foundation evaluation case studies and summarizes what influence teaches everyone about culture and what culture teaches everyone about…

Study of hepatocyte plasma membrane mechanical properties using optical trapping

NASA Astrophysics Data System (ADS)

Vedyaykin, A. D.; Morozova, N. E.; Pobegalov, G. E.; Arseniev, A. N.; Khodorkoskii, M. A.; Sabantsev, A. V.

2014-12-01

In this paper we describe the use of membrane tether formation technique which is widely used to study mechanical properties of plasma membranes. This method was successfully used for the direct measurement of parameters characterizing membranes mechanical properties (static tether tension force and effective membrane viscosity) of human hepatocytes (HepG2 hepatocellular carcinoma line). These results allow using this method in future for diagnostics of the cell membrane, evaluating the influence on the mechanical parameters of various factors, including toxins and drugs.

Starch hydrogels: The influence of the amylose content and gelatinization method.

PubMed

Biduski, Bárbara; Silva, Wyller Max Ferreria da; Colussi, Rosana; Halal, Shanise Lisie de Mello El; Lim, Loong-Tak; Dias, Álvaro Renato Guerra; Zavareze, Elessandra da Rosa

2018-07-01

Gelatinization and retrogradation, influenced by amylose and amylopectin ratio, are important characteristics for starch hydrogels elaboration. The objective of this study was to evaluate the influence of amylose content and the gelatinization method on the physicochemical characteristics of native and cross-linked rice starch hydrogels. The native and cross-linked starches were gelatinized with heating or alkaline solution, added polyvinyl alcohol, frozen and then freeze-dried. The cross-linked starch had a low final viscosity (101.38 RVU), which made the heat-induced gelatinized hydrogel readily disintegrated in water. However, modified starch hydrogels obtained by alkaline-induced gelatinization resulted in a more rigid structure than the native starch hydrogels. In addition, the starch sample with high amylose content had lower water absorption (322.2%) due to the greater stiffness of the hydrogel structure that resisted swelling. The alkaline-gelatinization resulted in stiffer hydrogels with lower water absorption (322.2 to 534.8%), while the heat-gelatinized behaved as a superabsorbent (658.7 to 1068.5%). The variability of the hydrogels properties of this study can enable a range of applications due to different amylose contents and gelatinization methods. Copyright © 2018 Elsevier B.V. All rights reserved.

Patterns of relative magnitudes of soil energy channels and their relationships with environmental factors in different ecosystems in Romania.

PubMed

Ciobanu, Marcel; Popovici, Iuliana; Zhao, Jie; Stoica, Ilie-Adrian

2015-12-01

The percentage compositions of soil herbivorous, bacterivorous and fungivorous nematodes in forests, grasslands and scrubs in Romania was analysed. Percentages of nematode abundance, biomass and metabolic footprint methods were used to evaluate the patterns and relative size of herbivory, bacterial- and fungal-mediated channels in organic and mineral soil horizons. Patterns and magnitudes of herbivore, bacterivore and fungivore energy pathways differed for a given ecosystem type and soil depth according to the method used. The relevance of herbivore energy channel increased with soil depth due to higher contribution of root-feeders. Ectoparasites, sedentary parasites and epidermal cell and root hair feeders were the most important contributors to the total biomass and metabolic footprints of herbivores. Metabolic footprint method revealed the general dominance of bacterial-based energy channel in all five types of ecosystems. The influence of altitude and climatic factors on percentages of abundance, biomass and metabolic footprints of herbivores, bacterivores and fungivores decreased with soil depth, whereas the influence of humus content, cation-exchange capacity and base saturation increased. Vegetation, altitude, climate and soil physico-chemical characteristics are important factors that influenced the abundance, biomass and metabolic footprints of herbivores, bacterivores and fungivores.

Patterns of relative magnitudes of soil energy channels and their relationships with environmental factors in different ecosystems in Romania

PubMed Central

Ciobanu, Marcel; Popovici, Iuliana; Zhao, Jie; Stoica, Ilie-Adrian

2015-01-01

The percentage compositions of soil herbivorous, bacterivorous and fungivorous nematodes in forests, grasslands and scrubs in Romania was analysed. Percentages of nematode abundance, biomass and metabolic footprint methods were used to evaluate the patterns and relative size of herbivory, bacterial- and fungal-mediated channels in organic and mineral soil horizons. Patterns and magnitudes of herbivore, bacterivore and fungivore energy pathways differed for a given ecosystem type and soil depth according to the method used. The relevance of herbivore energy channel increased with soil depth due to higher contribution of root-feeders. Ectoparasites, sedentary parasites and epidermal cell and root hair feeders were the most important contributors to the total biomass and metabolic footprints of herbivores. Metabolic footprint method revealed the general dominance of bacterial-based energy channel in all five types of ecosystems. The influence of altitude and climatic factors on percentages of abundance, biomass and metabolic footprints of herbivores, bacterivores and fungivores decreased with soil depth, whereas the influence of humus content, cation-exchange capacity and base saturation increased. Vegetation, altitude, climate and soil physico-chemical characteristics are important factors that influenced the abundance, biomass and metabolic footprints of herbivores, bacterivores and fungivores. PMID:26620189

Patterns of relative magnitudes of soil energy channels and their relationships with environmental factors in different ecosystems in Romania

NASA Astrophysics Data System (ADS)

Ciobanu, Marcel; Popovici, Iuliana; Zhao, Jie; Stoica, Ilie-Adrian

2015-12-01

The percentage compositions of soil herbivorous, bacterivorous and fungivorous nematodes in forests, grasslands and scrubs in Romania was analysed. Percentages of nematode abundance, biomass and metabolic footprint methods were used to evaluate the patterns and relative size of herbivory, bacterial- and fungal-mediated channels in organic and mineral soil horizons. Patterns and magnitudes of herbivore, bacterivore and fungivore energy pathways differed for a given ecosystem type and soil depth according to the method used. The relevance of herbivore energy channel increased with soil depth due to higher contribution of root-feeders. Ectoparasites, sedentary parasites and epidermal cell and root hair feeders were the most important contributors to the total biomass and metabolic footprints of herbivores. Metabolic footprint method revealed the general dominance of bacterial-based energy channel in all five types of ecosystems. The influence of altitude and climatic factors on percentages of abundance, biomass and metabolic footprints of herbivores, bacterivores and fungivores decreased with soil depth, whereas the influence of humus content, cation-exchange capacity and base saturation increased. Vegetation, altitude, climate and soil physico-chemical characteristics are important factors that influenced the abundance, biomass and metabolic footprints of herbivores, bacterivores and fungivores.

Estimating site occupancy and abundance using indirect detection indices

USGS Publications Warehouse

Stanley, T.R.; Royle, J. Andrew

2005-01-01

Knowledge of factors influencing animal distribution and abundance is essential in many areas of ecological research, management, and policy-making. Because common methods for modeling and estimating abundance (e.g., capture-recapture, distance sampling) are sometimes not practical for large areas or elusive species, indices are sometimes used as surrogate measures of abundance. We present an extension of the Royle and Nichols (2003) generalization of the MacKenzie et al. (2002) site-occupancy model that incorporates length of the sampling interval into the, model for detection probability. As a result, we obtain a modeling framework that shows how useful information can be extracted from a class of index methods we call indirect detection indices (IDIs). Examples of IDIs include scent station, tracking tube, snow track, tracking plate, and hair snare surveys. Our model is maximum likelihood, and it can be used to estimate site occupancy and model factors influencing patterns of occupancy and abundance in space. Under certain circumstances, it can also be used to estimate abundance. We evaluated model properties using Monte Carlo simulations and illustrate the method with tracking tube and scent station data. We believe this model will be a useful tool for determining factors that influence animal distribution and abundance.

Modified GMDH-NN algorithm and its application for global sensitivity analysis

NASA Astrophysics Data System (ADS)

Song, Shufang; Wang, Lu

2017-11-01

Global sensitivity analysis (GSA) is a very useful tool to evaluate the influence of input variables in the whole distribution range. Sobol' method is the most commonly used among variance-based methods, which are efficient and popular GSA techniques. High dimensional model representation (HDMR) is a popular way to compute Sobol' indices, however, its drawbacks cannot be ignored. We show that modified GMDH-NN algorithm can calculate coefficients of metamodel efficiently, so this paper aims at combining it with HDMR and proposes GMDH-HDMR method. The new method shows higher precision and faster convergent rate. Several numerical and engineering examples are used to confirm its advantages.

Variation of Reaction Time in Different Phases of Menstrual Cycle

PubMed Central

Kumar, Sunil; Mufti, Mehak; Kisan, Ravikiran

2013-01-01

Objective: To evaluate the influence of menstrual cycle on auditory and visual reaction times. Method: This study was conducted on thirty, healthy, regularly menstruating female subjects who were in the age group of 18-25 years. Influence of different phases of menstrual cycle on Auditory Reaction Time (ART) and Visual Reaction Time (VRT) was evaluated by using a portable audiovisual reaction time apparatus. Result: The statistical tests which were used were ANOVA and Students ‘t’ test, which showed that there were significant increases in ART and VRT during luteal phase, as compared to those in follicular phase. Conclusion: Changes in ART and VRT during different phases of menstrual cycle could be due to changes in the levels of female sex hormones, which in turn may lead to salt and water retention. PMID:24086851

Effect of Sweating on Insulation of Footwear.

PubMed

Kuklane, Kalev; Holmér, Ingvar

1998-01-01

The study aimed to find out the influence of sweating on footwear insulation with a thermal foot model. Simultaneously, the influence of applied weight (35 kg), sock, and steel toe cap were studied. Water to 3 sweat glands was supplied with a pump at the rate of 10 g/hr in total. Four models of boots with steel toe caps were tested. The same models were manufactured also without steel toe. Sweating reduced footwear insulation 19-25% (30-37% in toes). During static conditions, only a minimal amount of sweat evaporated from boots. Weight affected sole insulation: Reduction depended on compressibility of sole material. The influence of steel toe varied with insulation. The method of thermal foot model appears to be a practical tool for footwear evaluation.

[Modeling the academic performance of medical students in basic sciences and pre-clinical courses: a longitudinal study].

PubMed

Zúñiga, Denisse; Mena, Beltrán; Oliva, Rose; Pedrals, Nuria; Padilla, Oslando; Bitran, Marcela

2009-10-01

The study of predictors of academic performance is relevant for medical education. Most studies of academic performance use global ratings as outcome measure, and do not evaluate the influence of the assessment methods. To model by multivariate analysis, the academic performance of medical considering, besides academic and demographic variables, the methods used to assess students' learning and their preferred modes of information processing. Two hundred seventy two students admitted to the medical school of the Pontificia Universidad Católica de Chile from 2000 to 2003. Six groups of variables were studied to model the students' performance in five basic science courses (Anatomy, Biology, Calculus, Chemistry and Physics) and two pre-clinical courses (Integrated Medical Clinic I and IT). The assessment methods examined were multiple choice question tests, Objective Structured Clinical Examination and tutor appraisal. The results of the university admission tests (high school grades, mathematics and biology tests), the assessment methods used, the curricular year and previous application to medical school, were predictors of academic performance. The information processing modes influenced academic performance, but only in interaction with other variables. Perception (abstract or concrete) interacted with the assessment methods, and information use (active or reflexive), with sex. The correlation between the real and predicted grades was 0.7. In addition to the academic results obtained prior to university entrance, the methods of assessment used in the university and the information processing modes influence the academic performance of medical students in basic and preclinical courses.

Correction method for influence of tissue scattering for sidestream dark-field oximetry using multicolor LEDs

NASA Astrophysics Data System (ADS)

Kurata, Tomohiro; Oda, Shigeto; Kawahira, Hiroshi; Haneishi, Hideaki

2016-12-01

We have previously proposed an estimation method of intravascular oxygen saturation (SO_2) from the images obtained by sidestream dark-field (SDF) imaging (we call it SDF oximetry) and we investigated its fundamental characteristics by Monte Carlo simulation. In this paper, we propose a correction method for scattering by the tissue and performed experiments with turbid phantoms as well as Monte Carlo simulation experiments to investigate the influence of the tissue scattering in the SDF imaging. In the estimation method, we used modified extinction coefficients of hemoglobin called average extinction coefficients (AECs) to correct the influence from the bandwidth of the illumination sources, the imaging camera characteristics, and the tissue scattering. We estimate the scattering coefficient of the tissue from the maximum slope of pixel value profile along a line perpendicular to the blood vessel running direction in an SDF image and correct AECs using the scattering coefficient. To evaluate the proposed method, we developed a trial SDF probe to obtain three-band images by switching multicolor light-emitting diodes and obtained the image of turbid phantoms comprised of agar powder, fat emulsion, and bovine blood-filled glass tubes. As a result, we found that the increase of scattering by the phantom body brought about the decrease of the AECs. The experimental results showed that the use of suitable values for AECs led to more accurate SO_2 estimation. We also confirmed the validity of the proposed correction method to improve the accuracy of the SO_2 estimation.

Extension of an assessment model of ship traffic exhaust emissions for particulate matter and carbon monoxide

NASA Astrophysics Data System (ADS)

Jalkanen, J.-P.; Johansson, L.; Kukkonen, J.; Brink, A.; Kalli, J.; Stipa, T.

2012-03-01

A method is presented for the evaluation of the exhaust emissions of marine traffic, based on the messages provided by the Automatic Identification System (AIS), which enable the positioning of ship emissions with a high spatial resolution (typically a few tens of metres). The model also takes into account the detailed technical data of each individual vessel. The previously developed model was applicable for evaluating the emissions of NOx, SOx and CO2. This paper addresses a substantial extension of the modelling system, to allow also for the mass-based emissions of particulate matter (PM) and carbon monoxide (CO). The presented Ship Traffic Emissions Assessment Model (STEAM2) allows for the influences of accurate travel routes and ship speed, engine load, fuel sulphur content, multiengine setups, abatement methods and waves. We address in particular the modeling of the influence on the emissions of both engine load and the sulphur content of the fuel. The presented methodology can be used to evaluate the total PM emissions, and those of organic carbon, elemental carbon, ash and hydrated sulphate. We have evaluated the performance of the extended model against available experimental data on engine power, fuel consumption and the composition-resolved emissions of PM. We have also compared the annually averaged emission values with those of the corresponding EMEP inventory, As example results, the geographical distributions of the emissions of PM and CO are presented for the marine regions of the Baltic Sea surrounding the Danish Straits.

Influence of Prosolv and Prosolv:Mannitol 200 direct compression fillers on the physicomechanical properties of atorvastatin oral dispersible tablets.

PubMed

Gowda, Veeran; Pabari, Ritesh M; Kelly, John G; Ramtoola, Zebunnissa

2015-06-01

The objective of the present study was to evaluate the influence of Prosolv® and Prosolv®: Mannitol 200 direct compression (DC) fillers on the physicomechanical characteristics of oral dispersible tablets (ODTs) of crystalline atorvastatin calcium. ODTs were formulated by DC and were analyzed for weight uniformity, hardness, friability, drug content, disintegration and dissolution. Three disintegration time (DT) test methods; European Pharmacopoeia (EP) method for conventional tablets (Method 1), a modification of this method (Method 2) and the EP method for oral lyophilisates (Method 3) were compared as part of this study. All ODTs showed low weight variation of <2.5%. Prosolv® only ODTs showed the highest tablet hardness of ∼ 73 N, hardness decreased with increasing mannitol content. Friability of all formulations was <1% although friability of Prosolv®:Mannitol ODTs was higher than for pure Prosolv®. DT of all ODTs was <30 s. Method 2 showed the fastest DT. Method 3 was non-discriminatory giving a DT of 13-15 s for all formulations. Atorvastatin dissolution from all ODTs was >60% within 5 min despite the drug being crystalline. Prosolv® and Prosolv®:Mannitol-based ODTs are suitable for ODT formulations by DC to give ODTs with high mechanical strength, rapid disintegration and dissolution.

Process Evaluation of a Diversity Training Program: The Value of a Mixed Method Strategy

ERIC Educational Resources Information Center

Celik, Halime; Abma, Tineke A.; Klinge, Ineke; Widdershoven, Guy A. M.

2012-01-01

Patients' health and health needs are influenced by categories of difference like sex, gender, ethnic origin and socioeconomic status (SES). To enhance awareness of this diversity among patients and to provide holistic care for them, health professionals should first be aware of the relation between dimensions of diversity and patients' health and…

African American English Dialect and Performance on Nonword Spelling and Phonemic Awareness Tasks

ERIC Educational Resources Information Center

Kohler, Candida T.; Bahr, Ruth Huntley; Silliman, Elaine R.; Bryant, Judith Becker; Apel, Kenn; Wilkinson, Louise C.

2007-01-01

Purpose: To evaluate the role of dialect on phonemic awareness and nonword spelling tasks. These tasks were selected for their reliance on phonological and orthographic processing, which may be influenced by dialect use. Method: Eighty typically developing African American children in Grades 1 and 3 were first screened for dialect use and then…

Sociocultural Influences: Evaluations of Indigenous Children for Special Needs in Rural Central Mexico

ERIC Educational Resources Information Center

Mackenzie, Jacqueline Zaleski

2010-01-01

This study examined indigenous infants, children, and youth in rural central Mexico for developmental delays by using a mixed methods approach. A two-person team consisting of a researcher and a translator completed this study. They conducted observations of 665 minors and interviews with their caregivers. A self-designed rubric was the guide to…

Stress Wave E-Rating of Structural Timber—Size and Moisture Content Effects

Treesearch

Xiping Wang

2013-01-01

The objectives of this study were to investigate the influence of cross sectional size and moisture content on stress wave properties of structural timber in various sizes and evaluate the feasibility of using stress wave method to E-rate timber in green conditions. Four different sizes of Douglas-fir (Pseudotsuga menziesii) square timbers were...

Bewitching Ideas Influence Learning: An Evaluation of an Interdisciplinary Teaching Experience

ERIC Educational Resources Information Center

Nava-Whitehead, Susan M.; Augusto, Kerri W.; Gow, Joan-Beth

2011-01-01

This column provides original articles on innovations in case study teaching, assessment of the method, as well as case studies with teaching notes. In this month's issue the authors describe an interdisciplinary approach to case study teaching that addresses the demand to balance the goals of process and content. The case study, Salem's Secrets…

Terrain and landform influence on Tsuga canadensis (L.) Carriere (Eastern Hemlock) distribution in the southern Appalachian Mountains

Treesearch

G. Narayanaraj; P.V. Bolstad; K.J. Elliott; J.M. Vose

2010-01-01

We examined the relationships between hemlock distribution and abundance and terrain attributes for the Coweeta Basin in the southern Appalachian Mountains. Field measurements were combined with GIS mapping methods to develop predictive models of abundance and distribution of Tsuga canadensis (L.) Carriere (eastern hemlock) and evaluate the co-...

Investigation of the influence of leaf thickness on canopy reflectance and physiological traits in upland and Pima cotton populations

USDA-ARS?s Scientific Manuscript database

Field-based, high-throughput phenotyping (FB-HTP) methods are becoming more prevalent in plant genetics and breeding because they enable the evaluation of large numbers of genotypes under actual field conditions. Many systems for FB-HTP quantify and characterize the reflected radiation from the crop...

Analysis of protein oxidation in serum of fetal and newborn piglets and the influence of iron dextran on induction of protein carbonyls.

USDA-ARS?s Scientific Manuscript database

Methods were employed to evaluate serum biomarkers associated with protein oxidative stress and damage, to determine potential sources of metabolic stress in baby pigs. Protein carbonyls in serum were converted to dinitrophenyl (DNP) derivatives with DNP-hydrazine, precipitated with TCA, extracted i...

Evaluations of alternative methods for monitoring and estimating responses of salmon productivity in the North Pacific to future climatic change and other processes: A simulation study

EPA Science Inventory

Estimation of the relative influence of climate change, compared to other human activities, on dynamics of Pacific salmon (Oncorhynchus spp.) populations can help management agencies take appropriate management actions. We used empirically based simulation modelling of 48 sockeye...

Reconstructing directed gene regulatory network by only gene expression data.

PubMed

Zhang, Lu; Feng, Xi Kang; Ng, Yen Kaow; Li, Shuai Cheng

2016-08-18

Accurately identifying gene regulatory network is an important task in understanding in vivo biological activities. The inference of such networks is often accomplished through the use of gene expression data. Many methods have been developed to evaluate gene expression dependencies between transcription factor and its target genes, and some methods also eliminate transitive interactions. The regulatory (or edge) direction is undetermined if the target gene is also a transcription factor. Some methods predict the regulatory directions in the gene regulatory networks by locating the eQTL single nucleotide polymorphism, or by observing the gene expression changes when knocking out/down the candidate transcript factors; regrettably, these additional data are usually unavailable, especially for the samples deriving from human tissues. In this study, we propose the Context Based Dependency Network (CBDN), a method that is able to infer gene regulatory networks with the regulatory directions from gene expression data only. To determine the regulatory direction, CBDN computes the influence of source to target by evaluating the magnitude changes of expression dependencies between the target gene and the others with conditioning on the source gene. CBDN extends the data processing inequality by involving the dependency direction to distinguish between direct and transitive relationship between genes. We also define two types of important regulators which can influence a majority of the genes in the network directly or indirectly. CBDN can detect both of these two types of important regulators by averaging the influence functions of candidate regulator to the other genes. In our experiments with simulated and real data, even with the regulatory direction taken into account, CBDN outperforms the state-of-the-art approaches for inferring gene regulatory network. CBDN identifies the important regulators in the predicted network: 1. TYROBP influences a batch of genes that are related to Alzheimer's disease; 2. ZNF329 and RB1 significantly regulate those 'mesenchymal' gene expression signature genes for brain tumors. By merely leveraging gene expression data, CBDN can efficiently infer the existence of gene-gene interactions as well as their regulatory directions. The constructed networks are helpful in the identification of important regulators for complex diseases.

HEALTH TECHNOLOGY ASSESSMENT OF PUBLIC HEALTH INTERVENTIONS: A SYNTHESIS OF METHODOLOGICAL GUIDANCE.

PubMed

Mathes, Tim; Antoine, Sunya-Lee; Prengel, Peggy; Bühn, Stefanie; Polus, Stephanie; Pieper, Dawid

2017-01-01

The evaluation of public health interventions poses some challenges. As a consequence, health technology assessment (HTA) methods for public health interventions (PHI) have to be adapted. This study aimed to summarize the available guidance on methods for HTA of PHI. We systematically searched for methodological guidance on HTA of PHIs. Our focus was on research synthesis methods to evaluate effectiveness. Relevant information was synthesized narratively in a standardized way. Only four guidance documents were identified specifically for HTAs of PHI. The approaches used for HTAs of PHIs are broader and more flexible than those for medical interventions. For this reason, there is a tendency to identify the intervention components and context factors that influence the effectiveness and transferability of an intervention rather than to assess its effectiveness in general. The details in the guidance vary without justification. Unjustified heterogeneity between the different guidance approaches is most pronounced for quality assessment, assessment of applicability, and methods to integrate qualitative and quantitative evidence. Descriptions for the assessment of integrity, heterogeneity, sustainability, context factors, and applicability are often vague. The heterogeneity in approaches indicates that there is currently no consensus on methods to deal with the challenges of the PHI evaluations. A possible explanation for this may be that the methods are not sufficiently developed, and advantages and disadvantages of a certain method in relation to the research question (e.g., broad/focused) have not yet been sufficiently evaluated.

Evaluation of a Cubature Kalman Filtering-Based Phase Unwrapping Method for Differential Interferograms with High Noise in Coal Mining Areas

PubMed Central

Liu, Wanli; Bian, Zhengfu; Liu, Zhenguo; Zhang, Qiuzhao

2015-01-01

Differential interferometric synthetic aperture radar has been shown to be effective for monitoring subsidence in coal mining areas. Phase unwrapping can have a dramatic influence on the monitoring result. In this paper, a filtering-based phase unwrapping algorithm in combination with path-following is introduced to unwrap differential interferograms with high noise in mining areas. It can perform simultaneous noise filtering and phase unwrapping so that the pre-filtering steps can be omitted, thus usually retaining more details and improving the detectable deformation. For the method, the nonlinear measurement model of phase unwrapping is processed using a simplified Cubature Kalman filtering, which is an effective and efficient tool used in many nonlinear fields. Three case studies are designed to evaluate the performance of the method. In Case 1, two tests are designed to evaluate the performance of the method under different factors including the number of multi-looks and path-guiding indexes. The result demonstrates that the unwrapped results are sensitive to the number of multi-looks and that the Fisher Distance is the most suitable path-guiding index for our study. Two case studies are then designed to evaluate the feasibility of the proposed phase unwrapping method based on Cubature Kalman filtering. The results indicate that, compared with the popular Minimum Cost Flow method, the Cubature Kalman filtering-based phase unwrapping can achieve promising results without pre-filtering and is an appropriate method for coal mining areas with high noise. PMID:26153776

Sources of method bias in social science research and recommendations on how to control it.

PubMed

Podsakoff, Philip M; MacKenzie, Scott B; Podsakoff, Nathan P

2012-01-01

Despite the concern that has been expressed about potential method biases, and the pervasiveness of research settings with the potential to produce them, there is disagreement about whether they really are a problem for researchers in the behavioral sciences. Therefore, the purpose of this review is to explore the current state of knowledge about method biases. First, we explore the meaning of the terms "method" and "method bias" and then we examine whether method biases influence all measures equally. Next, we review the evidence of the effects that method biases have on individual measures and on the covariation between different constructs. Following this, we evaluate the procedural and statistical remedies that have been used to control method biases and provide recommendations for minimizing method bias.

Genetic potential of common bean progenies obtained by different breeding methods evaluated in various environments.

PubMed

Pontes Júnior, V A; Melo, P G S; Pereira, H S; Melo, L C

2016-09-02

Grain yield is strongly influenced by the environment, has polygenic and complex inheritance, and is a key trait in the selection and recommendation of cultivars. Breeding programs should efficiently explore the genetic variability resulting from crosses by selecting the most appropriate method for breeding in segregating populations. The goal of this study was to evaluate and compare the genetic potential of common bean progenies of carioca grain for grain yield, obtained by different breeding methods and evaluated in different environments. Progenies originating from crosses between lines and CNFC 7812 and CNFC 7829 were replanted up to the F 7 generation using three breeding methods in segregating populations: population (bulk), bulk within F 2 progenies, and single-seed descent (SSD). Fifteen F 8 progenies per method, two controls (BRS Estilo and Perola), and the parents were evaluated in a 7 x 7 simple lattice design, with plots of two 4-m rows. The tests were conducted in 10 environments in four States of Brazil and in three growing seasons in 2009 and 2010. Genetic parameters including genetic variance, heritability, variance of interaction, and expected selection gain were estimated. Genetic variability among progenies and the effect of progeny-environment interactions were determined for the three methods. The breeding methods differed significantly due to the effects of sampling procedures on the progenies and due to natural selection, which mainly affected the bulk method. The SSD and bulk methods provided populations with better estimates of genetic parameters and more stable progenies that were less affected by interaction with the environment.

Influence of Electrification of Droplet on Hydrophobicity Reduction of Polymer Material during a Dynamic Drop Test

NASA Astrophysics Data System (ADS)

Haji, Kenichi; Shiibara, Daiki; Arata, Yoshihiro; Sakoda, Tatsuya; Otsubo, Masahisa

The dynamic drop test was proposed as a method to evaluate hydrophobicity reduction of polymer materials. In this test, the formation change of a water channel was confirmed, and thereafter, the remained droplets and the dropped droplets on the sampled surface were repulsed each other. The distributions of electrification on the droplet and the sample surface were measured. The influence of the electrified droplet on the hydrophobicity reduction was examined. The results showed that the polarity on the sample surface changed by the dropped droplet, leading to the hydrophobicity loss.

Non-Standard Gearing as the Possibility of Increasing Resistance to Pitting

NASA Astrophysics Data System (ADS)

Kopiláková, Beáta; Bošanský, Miroslav

2014-12-01

In this article are shown the influence of the type non-standard gearing to reduce damage to the pitting. The introduction of the article describes a fundamental difference between the involute and non-involute gearing and the influence of some parameters, especially of the slip ratio to damage of gearing. The paper describes the principle of evaluation pitting by makrofoto graphical method, too and also shows the basic results of the experiment, which was executed on two types of gearing (HCR gearing and C-C gearing) on the Niemanńs stend in term of the damage to pitting.

Best Practices for In-Situ Sediment-Water Incubations with Benthic Landers

NASA Astrophysics Data System (ADS)

Tengberg, Anders; Kononets, Mikhail; Hall, Per; Nilsson, Madeleine; Ekeroth, Nils

2017-04-01

Biological, chemical, physical and geological processes that take place at the seafloor are crucial in influencing and regulating many aquatic environments. One method to estimate exchange rates, fluxes, between the sediment and the overlying water is in-situ sediment-water incubations using autonomous chamber landers. As for all field sampling and measurements best practices methods are needed to obtain high quality data. With experiences form many years usage of the Gothenburg autonomous bottom lander systems this presentation will describe some of the experimental work that has been done with focus on quality control and data evaluation methods.

Solar CPC pilot plant photocatalytic degradation of bisphenol A in waters and wastewaters using suspended and supported-TiO2. Influence of photogenerated species.

PubMed

Saggioro, Enrico Mendes; Oliveira, Anabela Sousa; Pavesi, Thelma; Tototzintle, Margarita Jiménez; Maldonado, Manuel Ignacio; Correia, Fábio Verissimo; Moreira, Josino Costa

2014-11-01

Photocatalytic degradation of bisphenol A (BPA) in waters and wastewaters in the presence of titanium dioxide (TiO2) was performed under different conditions. Suspensions of the TiO2 were used to compare the degradation efficiency of BPA (20 mg L(-1)) in batch and compound parabolic collector (CPC) reactors. A TiO2 catalyst supported on glass spheres was prepared (sol-gel method) and used in a CPC solar pilot plant for the photodegradation of BPA (100 μg L(-1)). The influence of OH·, O2 (·-), and h (+) on the BPA degradation were evaluated. The radicals OH· and O2 (·-) were proved to be the main species involved on BPA photodegradation. Total organic carbon (TOC) and carboxylic acids were determined to evaluate the BPA mineralization during the photodegradation process. Some toxicological effects of BPA and its photoproducts on Eisenia andrei earthworms were evaluated. The results show that the optimal concentration of suspended TiO2 to degrade BPA in batch or CPC reactors was 0.1 g L(-1). According to biological tests, the BPA LC50 in 24 h for E. andrei was of 1.7 × 10(-2) mg cm(-2). The photocatalytic degradation of BPA mediated by TiO2 supported on glass spheres suffered strong influence of the water matrix. On real municipal wastewater treatment plant (MWWTP) secondary effluent, 30 % of BPA remains in solution; nevertheless, the method has the enormous advantage since it eliminates the need of catalyst removal step, reducing the cost of treatment.

Study protocol - Indigenous Australian social networks and the impact on smoking policy and programs in Australia: protocol for a mixed-method prospective study

PubMed Central

2013-01-01

Background Tobacco use is the most preventable cause of morbidity and mortality in Australia. Comprehensive tobacco control has reduced smoking rates in Australia from approximately 34 per cent in 1980 to 15 per cent in 2010. However, 46 per cent of Aboriginal and Torres Strait Islander people (Indigenous Australians) smoke on a daily basis, more than double the rate of non-Indigenous Australians. The evidence of effective tobacco control strategies for Indigenous Australians is relatively scarce. The aim of this study is to (i) explore the influences of smoking in Indigenous Australian people and to (ii) help inform and evaluate a multi-component tobacco control strategy. The study aims to answer the following questions: - do individuals' social networks influence smoking behaviours; - is there an association between various social and cultural factors and being a smoker or non-smoker; and - does a multi-component tobacco control program impact positively on tobacco behaviours, attitudes and beliefs in Indigenous Australians. Methods and design Our prospective study will use a mixed-method approach (qualitative and quantitative), including a pre- and post-test evaluation of a tobacco control initiative. The study will explore the social and cultural context underlying Indigenous Australian tobacco use and associated factors which influence smoking behaviour. Primary data will be collected via a panel survey, interviews and focus groups. Secondary data will include de-identified PBS items related to smoking and also data collected from the Quitlines call service. Network analysis will be used to assess whether social networks influence smoking behaviours. For the survey, baseline differences will be tested using chi2 statistics for the categorical and dichotomous variables and t-tests for the continuous variables, where appropriate. Grounded theory will be used to analyse the interviews and focus groups. Local Aboriginal community controlled organisations will partner in the study. Discussion Our study will explore the key factors, including the influence of social networks, that impact on tobacco use and the extent to which smoking behaviours transcend networks within the Indigenous Australian community in the ACT. This will add to the evidence-base, identifying influential factors to tobacco use and the effectiveness and influence of a multi-component tobacco control strategy. PMID:24060337

Comprehensive benefit evaluation of direct power-purchase for large consumers

NASA Astrophysics Data System (ADS)

Liu, D. N.; Li, Z. H.; Zhou, H. M.; Zhao, Q.; Xu, X. F.

2017-06-01

Based on "several opinions of the CPC Central Committee and the State Council on further deepening the reform of electric power system" in 2015, this paper analyses the influence of direct power-purchase for large consumers on operation benefit of power grid. In three aspects, such as economic benefit, cleaning benefit and social benefit, the index system is proposed. In which, the profit of saving coal energy consumption, reducing carbon emissions and reducing pollutant emissions is quantitative calculated. Then the subjective and objective weights and index scores are figured out through the analytic hierarchy process, entropy weight method and interval number method. Finally, the comprehensive benefit is evaluated combined with the actual study, and some suggestions are made.

Methodical bases of selection and evaluation of the effectiveness of the projects of the urban territory renovation

NASA Astrophysics Data System (ADS)

Sizova, Evgeniya; Zhutaeva, Evgeniya; Chugunov, Andrei

2018-03-01

The article highlights features of processes of urban territory renovation from the perspective of a commercial entity participating in the implementation of a project. The requirements of high-rise construction projects to the entities, that carry out them, are considered. The advantages of large enterprises as participants in renovation projects are systematized, contributing to their most efficient implementation. The factors, which influence the success of the renovation projects, are presented. A method for selecting projects for implementation based on criteria grouped by qualitative characteristics and contributing to the most complete and comprehensive evaluation of the project is suggested. Patterns to prioritize and harmonize renovation projects in terms of multi-project activity of the enterprise are considered.

Lagrangian methods for blood damage estimation in cardiovascular devices--How numerical implementation affects the results.

PubMed

Marom, Gil; Bluestein, Danny

2016-01-01

This paper evaluated the influence of various numerical implementation assumptions on predicting blood damage in cardiovascular devices using Lagrangian methods with Eulerian computational fluid dynamics. The implementation assumptions that were tested included various seeding patterns, stochastic walk model, and simplified trajectory calculations with pathlines. Post processing implementation options that were evaluated included single passage and repeated passages stress accumulation and time averaging. This study demonstrated that the implementation assumptions can significantly affect the resulting stress accumulation, i.e., the blood damage model predictions. Careful considerations should be taken in the use of Lagrangian models. Ultimately, the appropriate assumptions should be considered based the physics of the specific case and sensitivity analysis, similar to the ones presented here, should be employed.

Evaluation of the Influence of Sulfur-Fumigated Paeoniae Radix Alba on the Quality of Si Wu Tang by Chromatographic and Chemometric Analysis

PubMed Central

Pei, Ke; Duan, Yu; Qiao, Feng-Xian; Tu, Si-Cong; Liu, Xiao; Wang, Xiao-Li; Song, Xiao-Qing; Fan, Kai-Lei; Cai, Bao-Chang

2016-01-01

An accurate and reliable method of high-performance liquid chromatographic fingerprint combining with multi-ingredient determination was developed and validated to evaluate the influence of sulfur-fumigated Paeoniae Radix Alba on the quality and chemical constituents of Si Wu Tang. Multivariate data analysis including hierarchical cluster analysis and principal component analysis, which integrated with high-performance liquid chromatographic fingerprint and multi-ingredient determination, was employed to evaluate Si Wu Tang in a more objective and scientific way. Interestingly, in this paper, a total of 37 and 36 peaks were marked as common peaks in ten batches of Si Wu Tang containing sun-dried Paeoniae Radix Alba and ten batches of Si Wu Tang containing sulfur-fumigated Paeoniae Radix Alba, respectively, which indicated the changed fingerprint profile of Si Wu Tang when containing sulfur-fumigated herb. Furthermore, the results of simultaneous determination for multiple ingredients showed that the contents of albiflorin and paeoniflorin decreased significantly (P < 0.01) and the contents of gallic acid and Z-ligustilide decreased to some extent at the same time when Si Wu Tang contained sulfur-fumigated Paeoniae Radix Alba. Therefore, sulfur-fumigation processing may have great influence on the quality of Chinese herbal prescription. PMID:27034892

Effect of recycling protocol on mechanical strength of used mini-implants.

PubMed

Estelita, Sérgio; Janson, Guilherme; Chiqueto, Kelly; Ferreira, Eduardo Silveira

2014-01-01

Purpose. This study evaluated the influence of recycling process on the torsional strength of mini-implants. Materials and Methods. Two hundred mini-implants were divided into 4 groups with 50 screws equally distributed in five diameters (1.3 to 1.7 mm): control group (CG): unused mini-implants, G1: mini-implants inserted in pig iliac bone and removed, G2: same protocol of group 1 followed by sonication for cleaning and autoclave sterilization, and G3: same insertion protocol of group 1 followed by sonication for cleaning before and after sandblasting (Al2O3-90 µ) and autoclave sterilization. G2 and G3 mini-implants were weighed after recycling process to evaluate weight loss (W). All the screws were broken to determine the fracture torque (FT). The influence of recycling process on FT and W was evaluated by ANOVA, Mann-Whitney, and multiple linear regression analysis. Results. FT was not influenced by recycling protocols even when sandblasting was added. Sandblasting caused weight loss due to abrasive mechanical stripping of screw surface. Screw diameter was the only variable that affected FT. Conclusions. Torsional strengths of screws that underwent the recycling protocols were not changed. Thus, screw diameter choice can be a more critical step to avoid screw fracture than recycling decision.

The influence of body mass index on skin susceptibility to sodium lauryl sulphate.

PubMed

Löffler, H; Aramaki, J U N; Effendy, Isaak

2002-02-01

The influence of nutrition on the physiological functions of man is well studied. Numerous diseases can be exacerbated by obesity. However, it has not yet been determined whether body weight and body mass index (BMI), as an indicator of a high body fat store, can influence skin sensitivity. This study investigates the correlation between body mass index and the epidermal functions, evaluated by bioengineering methods, before and after an irritant patch test with sodium lauryl sulphate (SLS). Epidermal functions were evaluated using an evaporimeter, chromameter and laser-Doppler-flowmeter. Patch testing was conducted for 48 h with two different concentrations of SLS (0.25% and 0.5%) on the forearms of healthy volunteers. Measurements were performed 24h after patch removal. Obese individuals showed significantly increased transepidermal water loss (TEWL), skin blood flow and skin colour (red) as compared to a control group. However, the degree of skin sensitivity to SLS was not correlated with BMI. Basal biophysical parameters of the skin are primarily correlated with the BMI. This may be caused by obesity-induced physiological changes, e.g. increased sweat gland activity, high blood pressure and physiological temperature-regulating system. The epidermal barrier function, as evaluated after SLS patch testing is, however, not correlated with a high BMI, indicating a normal skin barrier.

Effects of particle size and adaptation duration on the digestible and metabolizable energy contents and digestibility of various chemical constituents in wheat for finishing pigs determined by the direct or indirect method.

PubMed

Fan, Yuanfang; Guo, Panpan; Yang, Yuyuan; Xia, Tian; Liu, Ling; Ma, Yongxi

2017-04-01

This experiment was conducted as a 3×2×2 factorial design to examine the effects of particle size (mean particle size of 331, 640, or 862 μm), evaluation method (direct vs indirect method) and adaptation duration (7 or 26 days) on the energy content and the apparent total tract digestibility (ATTD) of various chemical components in wheat when fed to finishing pigs. Forty-two barrows (Duroc×Landrace×Yorkshire) with an initial body weight of 63.0±0.8 kg were individually placed in metabolic cages and randomly allotted to 1 of 7 diets with 6 pigs fed each diet. For the indirect method, the pigs were fed either a corn-soybean meal based basal diet or diets in which 38.94% of the basal diet was substituted by wheat of the different particle sizes. In the direct method, the diets contained 97.34% wheat with the different particle sizes. For both the direct and indirect methods, the pigs were adapted to their diets for either 7 or 26 days. A reduction in particle size linearly increased the digestible energy (DE) and metabolizable energy (ME) contents as well as the ATTD of gross energy, crude protein, organic matter, ether extract (EE) and acid detergent fiber (ADF) (p<0.05), and had a trend to increase the ATTD of dry matter of wheat (p = 0.084). The DE, ME contents, and ATTD of gross energy, crude protein, dry matter and organic matter were higher (p<0.05) when determined by the direct method, but the ATTD of ADF, EE, and neutral detergent fiber were higher when determined by the indirect method (p<0.05). Prolongation of the adaption duration decreased the ATTD of neutral detergent fiber (p<0.05) and had a trend to increase the ATTD of EE (p = 0.061). There were no interactions between particle size and the duration of the adaptation duration. The ATTD of EE in wheat was influenced by a trend of interaction between method and adaptation duration (p = 0.074). The ATTD of ADF and EE in wheat was influenced by an interaction between evaluation method and wheat particle size such that there were linear equations (p<0.01) about ATTD of ADF and EE when determined by the direct method but quadratic equations (p = 0.073 and p = 0.088, respectively) about ATTD of ADF and EE when determined by the indirect method. Decreasing particle size can improve the DE and ME contents of wheat; both of the direct and indirect methods of evaluation are suitable for evaluating the DE and ME contents of wheat with different particle sizes; and an adaptation duration of 7 d is sufficient to evaluate DE and ME contents of wheat in finishing pigs.

A comparison of five standard methods for evaluating image intensity uniformity in partially parallel imaging MRI

PubMed Central

Goerner, Frank L.; Duong, Timothy; Stafford, R. Jason; Clarke, Geoffrey D.

2013-01-01

Purpose: To investigate the utility of five different standard measurement methods for determining image uniformity for partially parallel imaging (PPI) acquisitions in terms of consistency across a variety of pulse sequences and reconstruction strategies. Methods: Images were produced with a phantom using a 12-channel head matrix coil in a 3T MRI system (TIM TRIO, Siemens Medical Solutions, Erlangen, Germany). Images produced using echo-planar, fast spin echo, gradient echo, and balanced steady state free precession pulse sequences were evaluated. Two different PPI reconstruction methods were investigated, generalized autocalibrating partially parallel acquisition algorithm (GRAPPA) and modified sensitivity-encoding (mSENSE) with acceleration factors (R) of 2, 3, and 4. Additionally images were acquired with conventional, two-dimensional Fourier imaging methods (R = 1). Five measurement methods of uniformity, recommended by the American College of Radiology (ACR) and the National Electrical Manufacturers Association (NEMA) were considered. The methods investigated were (1) an ACR method and a (2) NEMA method for calculating the peak deviation nonuniformity, (3) a modification of a NEMA method used to produce a gray scale uniformity map, (4) determining the normalized absolute average deviation uniformity, and (5) a NEMA method that focused on 17 areas of the image to measure uniformity. Changes in uniformity as a function of reconstruction method at the same R-value were also investigated. Two-way analysis of variance (ANOVA) was used to determine whether R-value or reconstruction method had a greater influence on signal intensity uniformity measurements for partially parallel MRI. Results: Two of the methods studied had consistently negative slopes when signal intensity uniformity was plotted against R-value. The results obtained comparing mSENSE against GRAPPA found no consistent difference between GRAPPA and mSENSE with regard to signal intensity uniformity. The results of the two-way ANOVA analysis suggest that R-value and pulse sequence type produce the largest influences on uniformity and PPI reconstruction method had relatively little effect. Conclusions: Two of the methods of measuring signal intensity uniformity, described by the (NEMA) MRI standards, consistently indicated a decrease in uniformity with an increase in R-value. Other methods investigated did not demonstrate consistent results for evaluating signal uniformity in MR images obtained by partially parallel methods. However, because the spatial distribution of noise affects uniformity, it is recommended that additional uniformity quality metrics be investigated for partially parallel MR images. PMID:23927345

A three-dimensional finite element evaluation of magnetic attachment attractive force and the influence of the magnetic circuit.

PubMed

Kumano, Hirokazu; Nakamura, Yoshinori; Kanbara, Ryo; Takada, Yukyo; Ochiai, Kent T; Tanaka, Yoshinobu

2014-01-01

The finite element method has been considered to be excellent evaluative technique to study magnetic circuit optimization. The present study analyzed and quantitatively evaluated the different effects of magnetic circuit on attractive force and magnetic flux density using a three-dimensional finite element method for comparative evaluation. The diameter of a non-magnetic material in the shield disk of a magnetic assembly was variably increased by 0.1 mm to a maximum 2.0 mm in this study design. The analysis results demonstrate that attractive force increases until the diameter of the non-magnetic spacing material reaches a diameter of 0.5 mm where it peaks and then decreases as the overall diameter increases over 0.5 mm. The present analysis suggested that the attractive force for a magnetic attachment is optimized with an appropriate magnetic assembly shield disk diameter using a non-magnetic material to effectively change the magnetic circuit efficiency and resulting retention.

Evaluation of Bending Strength of Carburized Gears Based on Inferential Identification of Principal Surface Layer Defects

NASA Astrophysics Data System (ADS)

Masuyama, Tomoya; Inoue, Katsumi; Yamanaka, Masashi; Kitamura, Kenichi; Saito, Tomoyuki

High load capacity of carburized gears originates mainly from the hardened layer and induced residual stress. On the other hand, surface decarburization, which causes a nonmartensitic layer, and inclusions such as oxides and segregation act as latent defects which considerably reduce fatigue strength. In this connection, the authors have proposed a formula of strength evaluation by separately quantifying defect influence. However, the principal defect which limits strength of gears with several different defects remains unclarified. This study presents a method of inferential identification of principal defects based on test results of carburized gears made of SCM420 clean steel, gears with both an artificial notch and nonmartensitic layer at the tooth fillet, and so forth. It clarifies practical uses of presented methods, and strength of carburized gears can be evaluated by focusing on principal defect size.

Using a Mixed Model to Evaluate Job Satisfaction in High-Tech Industries

PubMed Central

Tsai, Sang-Bing; Huang, Chih-Yao; Wang, Cheng-Kuang; Chen, Quan; Pan, Jingzhou; Wang, Ge; Wang, Jingan; Chin, Ta-Chia; Chang, Li-Chung

2016-01-01

R&D professionals are the impetus behind technological innovation, and their competitiveness and capability drive the growth of a company. However, high-tech industries have a chronic shortage of such indispensable professionals. Accordingly, reducing R&D personnel turnover has become a major human resource management challenge facing innovative companies. This study combined importance–performance analysis (IPA) with the decision-making trial and evaluation laboratory (DEMATEL) method to propose an IPA–DEMATEL model. Establishing this model involved three steps. First, an IPA was conducted to measure the importance of and satisfaction gained from job satisfaction criteria. Second, the DEMATEL method was used to determine the causal relationships of and interactive influence among the criteria. Third, a criteria model was constructed to evaluate job satisfaction of high-tech R&D personnel. On the basis of the findings, managerial suggestions are proposed. PMID:27139697

Evaluation of the SeedCounter, A Mobile Application for Grain Phenotyping.

PubMed

Komyshev, Evgenii; Genaev, Mikhail; Afonnikov, Dmitry

2016-01-01

Grain morphometry in cereals is an important step in selecting new high-yielding plants. Manual assessment of parameters such as the number of grains per ear and grain size is laborious. One solution to this problem is image-based analysis that can be performed using a desktop PC. Furthermore, the effectiveness of analysis performed in the field can be improved through the use of mobile devices. In this paper, we propose a method for the automated evaluation of phenotypic parameters of grains using mobile devices running the Android operational system. The experimental results show that this approach is efficient and sufficiently accurate for the large-scale analysis of phenotypic characteristics in wheat grains. Evaluation of our application under six different lighting conditions and three mobile devices demonstrated that the lighting of the paper has significant influence on the accuracy of our method, unlike the smartphone type.

Modeling of unit operating considerations in generating-capacity reliability evaluation. Volume 1. Mathematical models, computing methods, and results. Final report. [GENESIS, OPCON and OPPLAN

DOE Office of Scientific and Technical Information (OSTI.GOV)

Patton, A.D.; Ayoub, A.K.; Singh, C.

1982-07-01

Existing methods for generating capacity reliability evaluation do not explicitly recognize a number of operating considerations which may have important effects in system reliability performance. Thus, current methods may yield estimates of system reliability which differ appreciably from actual observed reliability. Further, current methods offer no means of accurately studying or evaluating alternatives which may differ in one or more operating considerations. Operating considerations which are considered to be important in generating capacity reliability evaluation include: unit duty cycles as influenced by load cycle shape, reliability performance of other units, unit commitment policy, and operating reserve policy; unit start-up failuresmore » distinct from unit running failures; unit start-up times; and unit outage postponability and the management of postponable outages. A detailed Monte Carlo simulation computer model called GENESIS and two analytical models called OPCON and OPPLAN have been developed which are capable of incorporating the effects of many operating considerations including those noted above. These computer models have been used to study a variety of actual and synthetic systems and are available from EPRI. The new models are shown to produce system reliability indices which differ appreciably from index values computed using traditional models which do not recognize operating considerations.« less

[Preliminary influence of 2015 cigarette excise tax up-regulation on cigarette retail price].

PubMed

Feng, G Z; Wang, C X; Yang, J Q; Jiang, Y

2016-10-10

Objective: To evaluate the impact of cigarette excise tax up-regulation on the retail price of cigarettes in 2015. Methods: Nominal and real price of selected cigarette varieties were calculated with data from Tobacco Retail Price Monitoring Project, which was conducted in 10 cities of China from 2013 to 2015. The trend of the cigarette prices changing was analyzed with annual data. Results: A total of 352 varieties of cigarettes were surveyed during the three years. The nominal price of these cigarettes did not change significantly from 2013 to 2014. Compared with nominal price of 2014, the price of 286 varieties increased and the price of 10 most popular varieties increased from 0.6 % to 7.4 % after cigarette excise tax increased, but the actual prices had both rise and fall compared with 2013. Conclusions: Cigarette excise tax raise in 2015 had influence on the retail price of cigarettes. But the increase in retail price was very limited, if factors including inflation and purchasing power are taken into consideration. Therefore, the influence of 2015 cigarette excise tax raise on tobacco control needs further evaluation.

The influence of the use of viscosifying agents as dispersion media on the drug release properties from PLGA nanoparticles.

PubMed

Dillen, Kathleen; Weyenberg, Wim; Vandervoort, Jo; Ludwig, Annick

2004-11-01

Poly(lactide-co-glycolide) nanoparticles incorporating ciprofloxacin HCl were prepared by means of a W/O/W emulsification solvent evaporation method. The physicochemical properties of these particles were evaluated by measuring particle size, zeta potential and drug loading efficiency. Gamma-sterilised nanoparticles were dispersed in different isoviscous polymer solutions, commonly used as vehicles in eye drops. The influence of gamma-irradiation of the viscosifying agents on the drug release properties of the dispersed nanoparticles was evaluated with respect to release in mannitol solution. The viscosity of the polymer solutions prepared was measured by flow rheometry and thereby the influence of temperature and sterilisation by autoclaving on viscosity was examined. Before and after freeze-drying and subsequent sterilisation by gamma-irradiation, the polymer solutions were also characterised by dynamic stress sweep and dynamic frequency sweep oscillation measurements to deduce possible structural changes. A possible relationship between the differences in ciprofloxacin release from the nanoparticles suspended in the various media and the network structure or rheological behaviour of the polymers was investigated.

Influence of different methods of cleaning custom bases on the shear bond strength of indirectly bonded brackets.

PubMed

Kanashiro, Lylian K; Robles-Ruíz, Julissa J; Ciamponi, Ana L; Medeiros, Igor S; Tortamano, André; Paiva, João B

2014-09-01

To determine the influence on shear bond strength and bond failure location of four cleaning methods for orthodontic bracket custom bases. In vitro laboratory study. Eighty bovine teeth were divided at random into four groups. The bracket custom bases were cleaned with different methods: group 1 with methyl methacrylate monomer, group 2 with acetone, group 3 with 50 μm aluminium oxide particles and group 4 with detergent. The brackets were indirectly bonded onto the teeth with the Sondhi Rapid-Set self-curing adhesive. The maximum required shear bond strength to debond the brackets was recorded. The bond failure location was evaluated using the Adhesive Remnant Index (ARI). One-way analysis of variance (ANOVA) analysis (P<0·05) was used to detect significant differences in the bond strength. Kaplan-Meier survival plots and log-rank test were done to compare the survival distribution between the groups. The Kruskal-Wallis test (P<0·05) was used to evaluate the differences in the ARI scores. The mean bond strengths in groups 1, 2, 3 and 4 were 23·7±5·0, 25·3±5·1, 25·6±3·7 and 25·7±4·2 MPa, respectively. There were no significant statistically differences in either the bond strength or the ARI score between the groups. The four custom base-cleaning methods presented the same efficiencies on indirect bond of the brackets; thus, practitioners can choose the method that works best for them. © 2014 British Orthodontic Society.

A comparison of regression methods for model selection in individual-based landscape genetic analysis.

PubMed

Shirk, Andrew J; Landguth, Erin L; Cushman, Samuel A

2018-01-01

Anthropogenic migration barriers fragment many populations and limit the ability of species to respond to climate-induced biome shifts. Conservation actions designed to conserve habitat connectivity and mitigate barriers are needed to unite fragmented populations into larger, more viable metapopulations, and to allow species to track their climate envelope over time. Landscape genetic analysis provides an empirical means to infer landscape factors influencing gene flow and thereby inform such conservation actions. However, there are currently many methods available for model selection in landscape genetics, and considerable uncertainty as to which provide the greatest accuracy in identifying the true landscape model influencing gene flow among competing alternative hypotheses. In this study, we used population genetic simulations to evaluate the performance of seven regression-based model selection methods on a broad array of landscapes that varied by the number and type of variables contributing to resistance, the magnitude and cohesion of resistance, as well as the functional relationship between variables and resistance. We also assessed the effect of transformations designed to linearize the relationship between genetic and landscape distances. We found that linear mixed effects models had the highest accuracy in every way we evaluated model performance; however, other methods also performed well in many circumstances, particularly when landscape resistance was high and the correlation among competing hypotheses was limited. Our results provide guidance for which regression-based model selection methods provide the most accurate inferences in landscape genetic analysis and thereby best inform connectivity conservation actions. Published 2017. This article is a U.S. Government work and is in the public domain in the USA.

Influence of process parameters on content uniformity of a low dose active pharmaceutical ingredient in a tablet formulation according to GMP.

PubMed

Muselík, Jan; Franc, Aleš; Doležel, Petr; Goněc, Roman; Krondlová, Anna; Lukášová, Ivana

2014-09-01

The article describes the development and production of tablets using direct compression of powder mixtures. The aim was to describe the impact of filler particle size and the time of lubricant addition during mixing on content uniformity according to the Good Manufacturing Practice (GMP) process validation requirements. Processes are regulated by complex directives, forcing the producers to validate, using sophisticated methods, the content uniformity of intermediates as well as final products. Cutting down of production time and material, shortening of analyses, and fast and reliable statistic evaluation of results can reduce the final price without affecting product quality. The manufacturing process of directly compressed tablets containing the low dose active pharmaceutical ingredient (API) warfarin, with content uniformity passing validation criteria, is used as a model example. Statistic methods have proved that the manufacturing process is reproducible. Methods suitable for elucidation of various properties of the final blend, e.g., measurement of electrostatic charge by Faraday pail and evaluation of mutual influences of researched variables by partial least square (PLS) regression, were used. Using these methods, it was proved that the filler with higher particle size increased the content uniformity of both blends and the ensuing tablets. Addition of the lubricant, magnesium stearate, during the blending process improved the content uniformity of blends containing the filler with larger particles. This seems to be caused by reduced sampling error due to the suppression of electrostatic charge.

Analyzing handwriting biometrics in metadata context

NASA Astrophysics Data System (ADS)

Scheidat, Tobias; Wolf, Franziska; Vielhauer, Claus

2006-02-01

In this article, methods for user recognition by online handwriting are experimentally analyzed using a combination of demographic data of users in relation to their handwriting habits. Online handwriting as a biometric method is characterized by having high variations of characteristics that influences the reliance and security of this method. These variations have not been researched in detail so far. Especially in cross-cultural application it is urgent to reveal the impact of personal background to security aspects in biometrics. Metadata represent the background of writers, by introducing cultural, biological and conditional (changing) aspects like fist language, country of origin, gender, handedness, experiences the influence handwriting and language skills. The goal is the revelation of intercultural impacts on handwriting in order to achieve higher security in biometrical systems. In our experiments, in order to achieve a relatively high coverage, 48 different handwriting tasks have been accomplished by 47 users from three countries (Germany, India and Italy) have been investigated with respect to the relations of metadata and biometric recognition performance. For this purpose, hypotheses have been formulated and have been evaluated using the measurement of well-known recognition error rates from biometrics. The evaluation addressed both: system reliance and security threads by skilled forgeries. For the later purpose, a novel forgery type is introduced, which applies the personal metadata to security aspects and includes new methods of security tests. Finally in our paper, we formulate recommendations for specific user groups and handwriting samples.

Free wake analysis of hover performance using a new influence coefficient method

NASA Technical Reports Server (NTRS)

Quackenbush, Todd R.; Bliss, Donald B.; Ong, Ching Cho; Ching, Cho Ong

1990-01-01

A new approach to the prediction of helicopter rotor performance using a free wake analysis was developed. This new method uses a relaxation process that does not suffer from the convergence problems associated with previous time marching simulations. This wake relaxation procedure was coupled to a vortex-lattice, lifting surface loads analysis to produce a novel, self contained performance prediction code: EHPIC (Evaluation of Helicopter Performance using Influence Coefficients). The major technical features of the EHPIC code are described and a substantial amount of background information on the capabilities and proper operation of the code is supplied. Sample problems were undertaken to demonstrate the robustness and flexibility of the basic approach. Also, a performance correlation study was carried out to establish the breadth of applicability of the code, with very favorable results.

Characterization and damage evaluation of advanced materials

NASA Astrophysics Data System (ADS)

Mitrovic, Milan

Mechanical characterization of advanced materials, namely magnetostrictive and graphite/epoxy composite materials, is studied in this dissertation, with an emphasis on damage evaluation of composite materials. Consequently, the work in this dissertation is divided into two parts, with the first part focusing on characterization of the magneto-elastic response of magnetostrictlve materials, while the second part of this dissertation describes methods for evaluating the fatigue damage in composite materials. The objective of the first part of this dissertation is to evaluate a nonlinear constitutive relation which more closely depict the magneto-elastic response of magnetostrictive materials. Correlation between experimental and theoretical values indicate that the model adequately predicts the nonlinear strain/field relations in specific regimes, and that the currently employed linear approaches are inappropriate for modeling the response of this material in a structure. The objective of the second part of this dissertation is to unravel the complexities associated with damage events associated with polymeric composite materials. The intent is to characterize and understand the influence of impact and fatigue induced damage on the residual thermo-mechanical properties and compressive strength of composite systems. The influence of fatigue generated matrix cracking and micro-delaminations on thermal expansion coefficient (TEC) and compressive strength is investigated for woven graphite/epoxy composite system. Experimental results indicate that a strong correlation exists between TEC and compressive strength measurements, indicating that TEC measurements can be used as a damage metric for this material systems. The influence of delaminations on the natural frequencies and mode shapes of a composite laminate is also investigated. Based on the changes of these parameters as a function of damage, a methodology for determining the size and location of damage is suggested. Finally, the influence of loading parameters on impact damage growth is investigated experimentally though constant amplitude and spectrum loading fatigue tests. Based on observed impact damage growth during these tests it is suggested that the low load levels can be deleted from the standardized test sequence without significant influence on impact damage propagation.

Evaluating the Influence of the Microsatellite Marker Set on the Genetic Structure Inferred in Pyrus communis L.

PubMed Central

Urrestarazu, Jorge; Royo, José B.; Santesteban, Luis G.; Miranda, Carlos

2015-01-01

Fingerprinting information can be used to elucidate in a robust manner the genetic structure of germplasm collections, allowing a more rational and fine assessment of genetic resources. Bayesian model-based approaches are nowadays majorly preferred to infer genetic structure, but it is still largely unresolved how marker sets should be built in order to obtain a robust inference. The objective was to evaluate, in Pyrus germplasm collections, the influence of the SSR marker set size on the genetic structure inferred, also evaluating the influence of the criterion used to select those markers. Inferences were performed considering an increasing number of SSR markers that ranged from just two up to 25, incorporated one at a time into the analysis. The influence of the number of SSR markers used was evaluated comparing the number of populations and the strength of the signal detected, and also the similarity of the genotype assignments to populations between analyses. In order to test if those results were influenced by the criterion used to select the SSRs, several choosing scenarios based on the discrimination power or the fixation index values of the SSRs were tested. Our results indicate that population structure could be inferred accurately once a certain SSR number threshold was reached, which depended on the underlying structure within the genotypes, but the method used to select the markers included on each set appeared not to be very relevant. The minimum number of SSRs required to provide robust structure inferences and adequate measurements of the differentiation, even when low differentiation levels exist within populations, was proved similar to that of the complete list of recommended markers for fingerprinting. When a SSR set size similar to the minimum marker sets recommended for fingerprinting it is used, only major divisions or moderate (F ST>0.05) differentiation of the germplasm are detected. PMID:26382618

Influence of local anaesthesia on the quality of class II glass ionomer restorations.

PubMed

Van de Hoef, Nanda; Van Amerongen, Evert

2007-07-01

To investigate the influence of local anaesthesia on the quality of class II glass ionomer restorations with discomfort as cofactor. The study population consisted of 6- to 7-year-old schoolchildren in Paramaribo and its environs. To be included, each child needed to have a proximally situated cavity in a primary molar that was accessible to hand instruments and where no pulp exposure was expected. They were randomly divided into four treatment groups: conventional method with and without local anaesthesia and atraumatic restorative treatment method (ART) with and without local anaesthesia. The restoration quality was scored using the evaluation criteria for ART restorations (successful if restoration is correct or has a minor defect and fails if defects are larger than 0.5 mm, if secondary caries is observed, if the restoration is fractured, partly or totally lost or if the pulp is involved) at 6 and 30 months after treatment. The extent of discomfort was registered by assessing the behaviour (modified Venham score) and observing the heart rate during treatment. For this study 153 children were treated with hand instruments (ART) and 146 children with rotary instruments (conventional method). A total of 198 restorations were evaluated during follow-up periods. There were no significant differences in patient discomfort between the ART and the conventional group and between the anaesthesia and the non-anaesthesia group. The conventional restorations demonstrated significantly higher success rates than ART restorations after 6 (P = 0.001) and 30 months (P = 0.032). There were no significant differences in success rate between the anaesthesia and the non-anaesthesia group. Local anaesthesia has no influence on discomfort during treatment. Furthermore, discomfort during treatment does not affect the success rate of restorations.

Co-brand strategy of evaluation of visual images in furniture design: Jimmy S.P.A. and STRAUSS as examples

NASA Astrophysics Data System (ADS)

Chen, Tien-Li; Pan, Fang-Ming; Tsai, Jen-Hui

2013-03-01

This study aimed to investigate the correlation of the image associated by the design Co-Brand (Jimmy S.P.A. and STRAUSS) and the impression perceived by subject of viewers. Visual images were used to examine the merit of the evaluation. The best result is provided using an object as an appropriate evaluation method. There are a lot of factors which influence to evaluation of a design. This study is limited to distinguish the appearance from Jimmy's picture books transform furniture and so on. Co-Brand of Jimmy S.P.A. and STRAUSS is not easy because there are not from the same cultural, and industry background and applying different marketing strategy, it is a way to combine the two brands by designing, used questionnaire of SD (Semantic differential evaluation) evaluation method to test out the perception of viewers, the objective of this study is to investigate and appraised the Co-Brands use by of the image in furniture from patrons. SD evaluation result showed, if design cannot understand the perception image of Jimmy S.P.A and STRAUSS with viewers mind, furniture design also can't transmit feeling with design.

Evaluation of removal forces of implant-supported zirconia copings depending on abutment geometry, luting agent and cleaning method during re-cementation

PubMed Central

Rödiger, Matthias; Rinke, Sven; Ehret-Kleinau, Fenja; Pohlmeyer, Franziska; Lange, Katharina; Bürgers, Ralf

2014-01-01

PURPOSE To evaluate the effects of different abutment geometries in combination with varying luting agents and the effectiveness of different cleaning methods (prior to re-cementation) regarding the retentiveness of zirconia copings on implants. MATERIALS AND METHODS Implants were embedded in resin blocks. Three groups of titanium abutments (pre-fabricated, height: 7.5 mm, taper: 5.7°; customized-long, height: 6.79 mm, taper: 4.8°; customized-short, height: 4.31 mm, taper: 4.8°) were used for luting of CAD/CAM-fabricated zirconia copings with a semi-permanent (Telio CS) and a provisional cement (TempBond NE). Retention forces were evaluated using a universal testing machine. Furthermore, the influence of cleaning methods (manually, manually in combination with ultrasonic bath or sandblasting) prior to re-cementation with a provisional cement (TempBond NE) was investigated with the pre-fabricated titanium abutments (height: 7.5 mm, taper: 5.7°) and SEM-analysis of inner surfaces of the copings was performed. Significant differences were determined via two-way ANOVA. RESULTS Significant interactions between abutment geometry and luting agent were observed. TempBond NE showed the highest level of retentiveness on customized-long abutments, but was negatively affected by other abutment geometries. In contrast, luting with Telio CS demonstrated consistent results irrespective of the varying abutment geometries. Manual cleaning in combination with an ultrasonic bath was the only cleaning method tested prior to re-cementation that revealed retentiveness levels not inferior to primary cementation. CONCLUSION No superiority for one of the two cements could be demonstrated because their influences on retentive strength are also depending on abutment geometry. Only manual cleaning in combination with an ultrasonic bath offers retentiveness levels after re-cementation comparable to those of primary luting. PMID:25006388

Panel methods: An introduction

NASA Technical Reports Server (NTRS)

Erickson, Larry L.

1990-01-01

Panel methods are numerical schemes for solving (the Prandtl-Glauert equation) for linear, inviscid, irrotational flow about aircraft flying at subsonic or supersonic speeds. The tools at the panel-method user's disposal are (1) surface panels of source-doublet-vorticity distributions that can represent nearly arbitrary geometry, and (2) extremely versatile boundary condition capabilities that can frequently be used for creative modeling. Panel-method capabilities and limitations, basic concepts common to all panel-method codes, different choices that were made in the implementation of these concepts into working computer programs, and various modeling techniques involving boundary conditions, jump properties, and trailing wakes are discussed. An approach for extending the method to nonlinear transonic flow is also presented. Three appendices supplement the main test. In appendix 1, additional detail is provided on how the basic concepts are implemented into a specific computer program (PANAIR). In appendix 2, it is shown how to evaluate analytically the fundamental surface integral that arises in the expressions for influence-coefficients, and evaluate its jump property. In appendix 3, a simple example is used to illustrate the so-called finite part of the improper integrals.

Influence of inner circular sealing area impression method on the retention of complete dentures.

PubMed

Wang, Cun-Wei; Shao, Qi; Sun, Hui-Qiang; Mao, Meng-Yun; Zhang, Xin-Wei; Gong, Qi; Xiao, Guo-Ning

2015-01-01

The aims of the present study were to describe an impression method of "inner circular sealing area" and to evaluate the effect of the method on retention, aesthetics and comfort of complete dentures, which lack labial base for patients with maxillary protrusions. Three patients were subjected to the experiment, and two sets of complete maxillary dentures were made for each patient; the first set was made without labial base via an inner circular sealing area method (experimental group) and the second had an intact base that was made with conventional methods (control group). Retention force tests were implemented with a tensile strength assessment device to assess the retention and a visual analogue scale (VAS) was used to evaluate the comfort between the two groups. Results showed larger retention force, better aesthetics and more comfort in the experimental group. The improved two-step impression method formed an inner circular sealing area that prevented damage to the peripheral border seal effect of the denture caused by incomplete bases and obtained better denture retention.

Estimating occupancy and abundance of stream amphibians using environmental DNA from filtered water samples

USGS Publications Warehouse

Pilliod, David S.; Goldberg, Caren S.; Arkle, Robert S.; Waits, Lisette P.

2013-01-01

Environmental DNA (eDNA) methods for detecting aquatic species are advancing rapidly, but with little evaluation of field protocols or precision of resulting estimates. We compared sampling results from traditional field methods with eDNA methods for two amphibians in 13 streams in central Idaho, USA. We also evaluated three water collection protocols and the influence of sampling location, time of day, and distance from animals on eDNA concentration in the water. We found no difference in detection or amount of eDNA among water collection protocols. eDNA methods had slightly higher detection rates than traditional field methods, particularly when species occurred at low densities. eDNA concentration was positively related to field-measured density, biomass, and proportion of transects occupied. Precision of eDNA-based abundance estimates increased with the amount of eDNA in the water and the number of replicate subsamples collected. eDNA concentration did not vary significantly with sample location in the stream, time of day, or distance downstream from animals. Our results further advance the implementation of eDNA methods for monitoring aquatic vertebrates in stream habitats.

Bioimpedance for oedema evaluation after total knee arthroplasty.

PubMed

Pichonnaz, Claude; Bassin, Jean-Philippe; Currat, Damien; Martin, Estelle; Jolles, Brigitte M

2013-09-01

Electrical bioimpedance spectroscopy (BIS) allows the evaluation of limb extracellular fluid (R0) and total fluid (Rinf). BIS could facilitate post-surgical oedema evaluation after total knee arthroplasty (TKA), as it is easily performed and is non-invasive. However, neither its applicability in this context nor the influence of metallic implants on measurement has been evaluated. The aim of this study was to evaluate the influence of TKA implants on the BIS R0 and Rinf variables used for oedema evaluation. This was a prospective non-randomized comparative clinical trial. One oedema-free group of patients with TKA was compared with a group presenting similar characteristics except for the arthroplasty, to assess the influence of the implant on BIS measurement in the absence of oedema. The TKA group included 15 patients who had undergone surgery more than a year previously, and the control group included 19 patients awaiting TKA surgery. Volume and perimeter measurements served as reference criterions. The lower limb percentage differences for BIS, knee perimeter and volume were calculated. The significance of differences between groups was calculated for all measurement methods, using the Mann-Whitney test. The setting was a Department of Orthopedic Surgery and Traumatology in a university hospital. The differences between groups were not significant for R0, Rinf, volume and perimeter. R0 showed the smallest mean difference in limb percentage difference between groups [means (SD): TKA 3.98 (8.09), controls 3.97 (5.16)]. The lower-leg percentage difference in the TKA group is comparable with that of healthy subjects. R0 can be used for oedema evaluation following TKA surgery, as there was no sign of alteration from the metallic implant. These findings indicate the potential for early oedema evaluation after TKA. More research is warranted to extensively validate the application of BIS for oedema evaluation after TKA. Copyright © 2012 John Wiley & Sons, Ltd.

Information System Success Model for Customer Relationship Management System in Health Promotion Centers

PubMed Central

Choi, Wona; Rho, Mi Jung; Park, Jiyun; Kim, Kwang-Jum; Kwon, Young Dae

2013-01-01

Objectives Intensified competitiveness in the healthcare industry has increased the number of healthcare centers and propelled the introduction of customer relationship management (CRM) systems to meet diverse customer demands. This study aimed to develop the information system success model of the CRM system by investigating previously proposed indicators within the model. Methods The evaluation areas of the CRM system includes three areas: the system characteristics area (system quality, information quality, and service quality), the user area (perceived usefulness and user satisfaction), and the performance area (personal performance and organizational performance). Detailed evaluation criteria of the three areas were developed, and its validity was verified by a survey administered to CRM system users in 13 nationwide health promotion centers. The survey data were analyzed by the structural equation modeling method, and the results confirmed that the model is feasible. Results Information quality and service quality showed a statistically significant relationship with perceived usefulness and user satisfaction. Consequently, the perceived usefulness and user satisfaction had significant influence on individual performance as well as an indirect influence on organizational performance. Conclusions This study extends the research area on information success from general information systems to CRM systems in health promotion centers applying a previous information success model. This lays a foundation for evaluating health promotion center systems and provides a useful guide for successful implementation of hospital CRM systems. PMID:23882416

Nature, nurture and academic achievement: a twin study of teacher assessments of 7-year-olds.

PubMed

Walker, Sheila O; Petrill, Stephen A; Spinath, Frank M; Plomin, Robert

2004-09-01

Twin research has consistently shown substantial genetic influence on individual differences in cognitive ability; however, much less is known about the genetic and environmental aetiologies of school achievement. Our goal is to test the hypotheses that teacher-assessed achievement in the early school years shows substantial genetic influence but only modest shared environmental influence when children are assessed by the same teachers and by different teachers. 1,189 monozygotic (MZ) and dizygotic (DZ) twin pairs born in 1994 in England and Wales. Teachers evaluated academic achievement for 7-year-olds in Mathematics and English. Results were based on the twin method, which compares the similarity between identical and fraternal twins. Suggested substantial genetic influence in that identical twins were almost twice as similar as fraternal twins when compared on teacher assessments for Mathematics, English and a total score. The results confirm prior research suggesting that teacher assessments of academic achievement are substantially influenced by genetics. This finding holds even when twins are assessed independently by different teachers.

Diagnostic accuracy of the Eurotest for dementia: a naturalistic, multicenter phase II study

PubMed Central

Carnero-Pardo, Cristobal; Gurpegui, Manuel; Sanchez-Cantalejo, Emilio; Frank, Ana; Mola, Santiago; Barquero, M Sagrario; Montoro-Rios, M Teresa

2006-01-01

Background Available screening tests for dementia are of limited usefulness because they are influenced by the patient's culture and educational level. The Eurotest, an instrument based on the knowledge and handling of money, was designed to overcome these limitations. The objective of this study was to evaluate the diagnostic accuracy of the Eurotest in identifying dementia in customary clinical practice. Methods A cross-sectional, multi-center, naturalistic phase II study was conducted. The Eurotest was administered to consecutive patients, older than 60 years, in general neurology clinics. The patients' condition was classified as dementia or no dementia according to DSM-IV diagnostic criteria. We calculated sensitivity (Sn), specificity (Sp) and area under the ROC curves (aROC) with 95% confidence intervals. The influence of social and educational factors on scores was evaluated with multiple linear regression analysis, and the influence of these factors on diagnostic accuracy was evaluated with logistic regression. Results Sixteen neurologists recruited a total of 516 participants: 101 with dementia, 380 without dementia, and 35 who were excluded. Of the 481 participants who took the Eurotest, 38.7% were totally or functionally illiterate and 45.5% had received no formal education. Mean time needed to administer the test was 8.2+/-2.0 minutes. The best cut-off point was 20/21, with Sn = 0.91 (0.84–0.96), Sp = 0.82 (0.77–0.85), and aROC = 0.93 (0.91–0.95). Neither the scores on the Eurotest nor its diagnostic accuracy were influenced by social or educational factors. Conclusion This naturalistic and pragmatic study shows that the Eurotest is a rapid, simple and useful screening instrument, which is free from educational influences, and has appropriate internal and external validity. PMID:16606455

Bounded influence function based inference in joint modelling of ordinal partial linear model and accelerated failure time model.

PubMed

Chakraborty, Arindom

2016-12-01

A common objective in longitudinal studies is to characterize the relationship between a longitudinal response process and a time-to-event data. Ordinal nature of the response and possible missing information on covariates add complications to the joint model. In such circumstances, some influential observations often present in the data may upset the analysis. In this paper, a joint model based on ordinal partial mixed model and an accelerated failure time model is used, to account for the repeated ordered response and time-to-event data, respectively. Here, we propose an influence function-based robust estimation method. Monte Carlo expectation maximization method-based algorithm is used for parameter estimation. A detailed simulation study has been done to evaluate the performance of the proposed method. As an application, a data on muscular dystrophy among children is used. Robust estimates are then compared with classical maximum likelihood estimates. © The Author(s) 2014.

Animal welfare versus food quality: factors influencing organic consumers' preferences for alternatives to piglet castration without anaesthesia.

PubMed

Heid, Astrid; Hamm, Ulrich

2013-10-01

Surgical piglet castration without pain relief has been banned in organic farming in the EU since the beginning of 2012. Alternative methods therefore need to be implemented that improve animal welfare and solve the underlying problem of boar taint. This paper explores German organic consumers' preferences for piglet castration without pain relief and three alternative methods. In an innovative approach using a multi-criteria decision making procedure, qualitative data from focus group discussions were compared with quantitative results from Vickrey auctions. Overall, participants preferred all alternatives to castration without pain relief. Different aspects influenced willingness-to-pay for the methods. Animal welfare was important for the evaluation of castration without pain relief and castration with anaesthesia. Food safety played a major role for willingness-to-pay for immunocastration, while taste and, to some extent, animal welfare were dominant factors for fattening of boars. These differences should be considered when communicating the alternatives. Copyright © 2013 Elsevier Ltd. All rights reserved.

Measurement of company effectiveness using analytic network process method

NASA Astrophysics Data System (ADS)

Goran, Janjić; Zorana, Tanasić; Borut, Kosec

2017-07-01

The sustainable development of an organisation is monitored through the organisation's performance, which beforehand incorporates all stakeholders' requirements in its strategy. The strategic management concept enables organisations to monitor and evaluate their effectiveness along with efficiency by monitoring of the implementation of set strategic goals. In the process of monitoring and measuring effectiveness, an organisation can use multiple-criteria decision-making methods as help. This study uses the method of analytic network process (ANP) to define the weight factors of the mutual influences of all the important elements of an organisation's strategy. The calculation of an organisation's effectiveness is based on the weight factors and the degree of fulfilment of the goal values of the strategic map measures. New business conditions influence the changes in the importance of certain elements of an organisation's business in relation to competitive advantage on the market, and on the market, increasing emphasis is given to non-material resources in the process of selection of the organisation's most important measures.

Influence of finishing systems on hydrophilic and lipophilic oxygen radical absorbance capacity (ORAC) in beef.

PubMed

Wu, C; Duckett, S K; Neel, J P S; Fontenot, J P; Clapham, W M

2008-11-01

The aim of this research was to: (1) develop a reliable extraction procedure and assay to determine antioxidant activity in meat products, and (2) assess the effect of beef finishing system (forage-finished: alfalfa, pearl millet or mixed pastures vs. concentrate-finished) on longissimus muscle antioxidant activity. The effect of extraction method (ethanol concentration and extraction time), protein removal, and sample preparation method (pulverization or freeze drying) were first evaluated to develop an antioxidant assay for meat products. Beef extracts prepared with low ethanol concentrations (20%) demonstrated higher hydrophilic ORAC. Protein removal prior to extraction reduced hydrophilic ORAC values. Sample preparation method influenced both hydrophilic and lipophilic ORAC, with pulverized samples containing higher hydrophilic and lipophilic ORAC values. Beef cattle finishing system (Forage: alfalfa, pearl millet, or natural pasture vs. concentrates) had little impact on muscle hydrophilic ORAC, but muscle from forage finished beef contained greater lipophilic ORAC. In addition, broiling of steaks reduced hydrophilic ORAC.

On the interplay of morphology and electronic conductivity of rotationally spun carbon fiber mats

NASA Astrophysics Data System (ADS)

Opitz, Martin; Go, Dennis; Lott, Philipp; Müller, Sandra; Stollenwerk, Jochen; Kuehne, Alexander J. C.; Roling, Bernhard

2017-09-01

Carbon-based materials are used as electrode materials in a wide range of electrochemical applications, e.g., in batteries, supercapacitors, and fuel cells. For these applications, the electronic conductivity of the materials plays an important role. Currently, porous carbon materials with complex morphologies and hierarchical pore structures are in the focus of research. The complex morphologies influence the electronic transport and may lead to an anisotropic electronic conductivity. In this paper, we unravel the influence of the morphology of rotationally spun carbon fiber mats on their electronic conductivity. By combining experiments with finite-element simulations, we compare and evaluate different electrode setups for conductivity measurements. While the "bar-type method" with two parallel electrodes on the same face of the sample yields information about the intrinsic conductivity of the carbon fibers, the "parallel-plate method" with two electrodes on opposite faces gives information about the electronic transport orthogonal to the faces. Results obtained for the van-der-Pauw method suggest that this method is not well suited for understanding morphology-transport relations in these materials.

The use of EEG Biofeedback/Neurofeedback in psychiatric rehabilitation.

PubMed

Markiewcz, Renata

2017-12-30

The aim of the systematic review was to evaluate the use of EEG Biofeedback/Neurofeedback in patients treated for mental disorders. The review covered publications analyzing influences and effects of therapy in patients receiving psychiatric treatment based on EEG Biofeedback/Neurofeedback. Selection of publications was made by searching PubMed and Scopus databases. 328 records concerning applications of the presented method were identified in total, including 84 records for patients diagnosed with mental disorders. The analysis of studies indicates that EEG Biofeedback/Neurofeedback is used for treatment of neurological, somatic and mental disorders. Its psychiatric applications for clinically diagnosed disorders include treatmentof depression, anorexia, dyslexia, dysgraphia, ADD, ADHD, schizophrenia, abuse of substances, neuroses, PTSD, and Alzheimer's disease. Research results imply that the neuromodulating effect of the therapy positively influences cognitive processes, mood, and anxiety levels. Positive effects of EEG Biofeedback confirm usefulness of this method as a main or auxiliary method in treatment of people with mental disorders. On the basis of conducted studies, it is worthwhile to consider inclusion of this method into the comprehensive neurorehabilitation activities.

Methods and Model Dependency of Extreme Event Attribution: The 2015 European Drought

NASA Astrophysics Data System (ADS)

Hauser, Mathias; Gudmundsson, Lukas; Orth, René; Jézéquel, Aglaé; Haustein, Karsten; Vautard, Robert; van Oldenborgh, Geert J.; Wilcox, Laura; Seneviratne, Sonia I.

2017-10-01

Science on the role of anthropogenic influence on extreme weather events, such as heatwaves or droughts, has evolved rapidly in the past years. The approach of "event attribution" compares the occurrence-probability of an event in the present, factual climate with its probability in a hypothetical, counterfactual climate without human-induced climate change. Several methods can be used for event attribution, based on climate model simulations and observations, and usually researchers only assess a subset of methods and data sources. Here, we explore the role of methodological choices for the attribution of the 2015 meteorological summer drought in Europe. We present contradicting conclusions on the relevance of human influence as a function of the chosen data source and event attribution methodology. Assessments using the maximum number of models and counterfactual climates with pre-industrial greenhouse gas concentrations point to an enhanced drought risk in Europe. However, other evaluations show contradictory evidence. These results highlight the need for a multi-model and multi-method framework in event attribution research, especially for events with a low signal-to-noise ratio and high model dependency such as regional droughts.

[Process evaluation in relation to effectiveness assessment: experiences with school-based programs].

PubMed

Ariza, Carles; Villalbí, Joan R; Sánchez-Martínez, Francesca; Nebot, Manel

2011-06-01

Evaluation of public health interventions usually focus on the quality of design and research methods, and less on the quality of the intervention or process evaluation. In process evaluation of school-based interventions, key issues are how completely the intervention is carried out and adherence to the protocol. In addition, exploration of intermediate variables, such as those that influence (and often predict) preventable behavior, is highly useful. This article describes the basic concepts in this topic, using examples of the effectiveness of some preventive interventions carried out in schools. The interventions discussed were mainly quasi-experimental studies, based on data from programs promoted by public health teams in the city of Barcelona. Data from process evaluation of preventive programs in secondary schools that underwent formal assessment of their effectiveness is provided. The examples are drawn from preventive programs of HIV infection or unprotected sexual intercourse (PRESSEC program) and drug consumption prevention (the PASE, PASE.bcn and x kpts programs). These examples show why the intervention process influences the impact of the programs and their results. Thorough planning of process evaluation is essential to obtain valid indicators that will identify, in the effectiveness evaluation of the intervention, the most efficacious strategies to obtain positive outcomes. Copyright © 2011 Sociedad Española de Salud Pública y Administración Sanitaria. Published by Elsevier Espana. All rights reserved.

Governing patient safety: lessons learned from a mixed methods evaluation of implementing a ward-level medication safety scorecard in two English NHS hospitals.

PubMed

Ramsay, Angus I G; Turner, Simon; Cavell, Gillian; Oborne, C Alice; Thomas, Rebecca E; Cookson, Graham; Fulop, Naomi J

2014-02-01

Relatively little is known about how scorecards presenting performance indicators influence medication safety. We evaluated the effects of implementing a ward-level medication safety scorecard piloted in two English NHS hospitals and factors influencing these. We used a mixed methods, controlled before and after design. At baseline, wards were audited on medication safety indicators; during the 'feedback' phase scorecard results were presented to intervention wards on a weekly basis over 7 weeks. We interviewed 49 staff, including clinicians and managers, about scorecard implementation. At baseline, 18.7% of patients (total n=630) had incomplete allergy documentation; 53.4% of patients (n=574) experienced a drug omission in the preceding 24 h; 22.5% of omitted doses were classified as 'critical'; 22.1% of patients (n=482) either had ID wristbands not reflecting their allergy status or no ID wristband; and 45.3% of patients (n=237) had drugs that were either unlabelled or labelled for another patient in their drug lockers. The quantitative analysis found no significant improvement in intervention wards following scorecard feedback. Interviews suggested staff were interested in scorecard feedback and described process and culture changes. Factors influencing scorecard implementation included 'normalisation' of errors, study duration, ward leadership, capacity to engage and learning preferences. Presenting evidence-based performance indicators may potentially influence staff behaviour. Several practical and cultural factors may limit feedback effectiveness and should be considered when developing improvement interventions. Quality scorecards should be designed with care, attending to evidence of indicators' effectiveness and how indicators and overall scorecard composition fit the intended audience.

Nano rods for coloured glasses obtained by hybrid sol-gel coating.

PubMed

Veron, Olivier; Blondeau, Jean-Philippe; Moineau, Johanne; Aubert, Pierre-Henri; Vignolle, Caroline Andreazza; Banet, Philippe; Allam, Lévi

2011-09-01

Many new materials are now allowing new properties thanks to nanotechnology because this domain of physics gives possibilities to optimize targeted properties even if these materials react in very various influential parameters. Architectural, automotive, bone pathologies, environment, display applications are some concerned domains. The sol-gel process is a method allowing the realisation of coats at ambiant temperature, thus it is possible to realize Liquid Crystal Display (LCD), water-repellent coatings on privacy glass, antireflective coatings, hydrophobic or hydrophilic surfaces, bone tissue regeneration. In this study, the purpose is to show the thermal influence on a covered glass with a complex hybrid sol-gel solution. This coated glass is going to change color from red to orange under the heat influence. This color change effect comes from the evolution of various compounds organizations then/or from their loss during the degassing sequence. We show in spite of the complexity of the process that the responsible is mainly the organic dye. Thus the structure of the heated glass at 250 degrees C looks radically different than the heated one at 350 degrees C. SEM measurement allows to identify the surface compositions and to determine the elementary composition along the sample's cross section. TGA is used to justify a mass loss when samples are annealed. UV/Visible measurement is realized by two methods: in-line transmission to evaluate luminous flux and thus give colorimetric dot in the normalized CIE diagram and diffuse transmission to observe the size influence of the pigments. Infrared Reflectivity allows to evaluate the influence of species on the structure and to better target the nature of the lost compounds during annealing. TEM measurement proves that the obtained iron particles are nano rods for both samples.

Erythrocyte sedimentation rate and fibrinogen concentration of whole blood influences the cellular composition of platelet-rich plasma obtained from centrifugation methods.

PubMed

Yin, Wenjing; Xu, Zhengliang; Sheng, Jiagen; Xie, Xuetao; Zhang, Changqing

2017-09-01

Erythrocyte sedimentation rate (ESR), which reflects the sedimentation rate of platelets, leukocytes and erythrocytes in response to centrifugal force, may influence the cellular composition of platelet-rich plasma (PRP) obtained via centrifugation methods. However, no relevant studies have substantiated this. In the present study, blood was collected from 40 healthy volunteers and used to prepare PRP with two plasma-based preparation systems [YinPRP and Plasma Rich in Growth Factor (PRGF) systems] and two buffy coat-based systems (RegenPRP and WEGOPRP systems) in a single-donor model. Volumes of PRP and platelet-poor plasma (PPP) that were removed in the preparation process were recorded. Analyses of ESR, haematocrit, C-reaction protein, coagulation, serum glucose and serum lipid of the whole blood used for PRP preparation were performed to evaluate the levels of ESR and the factors known to influence it. Whole blood analysis was performed to evaluate the cellular composition of PRP. Results demonstrated that there were marked positive correlations between the ESR of the whole blood used for PRP preparation and PPP removal efficiencies, platelet concentrations, platelet capture efficiencies and platelet enrichment factors of PRP formulations obtained from plasma-based systems, and PRP yield efficiency of RegenPRP and PPP removal efficiency of WEGOPRP. Furthermore, there were marked negative correlations between ESR and concentrations and enrichment factors of platelets, leukocytes and erythrocytes of RegenPRP. Fibrinogen concentration of the whole blood, which had a marked positive correlation with ESR, also influenced the cellular composition of PRP. These findings may increase the understanding of PRP preparation and provide substantial evidence for the individualised optimisation of PRP preparation systems used in clinical practice.

Study on verifying the angle measurement performance of the rotary-laser system

NASA Astrophysics Data System (ADS)

Zhao, Jin; Ren, Yongjie; Lin, Jiarui; Yin, Shibin; Zhu, Jigui

2018-04-01

An angle verification method to verify the angle measurement performance of the rotary-laser system was developed. Angle measurement performance has a great impact on measuring accuracy. Although there is some previous research on the verification of angle measuring uncertainty for the rotary-laser system, there are still some limitations. High-precision reference angles are used in the study of the method, and an integrated verification platform is set up to evaluate the performance of the system. This paper also probes the error that has biggest influence on the verification system. Some errors of the verification system are avoided via the experimental method, and some are compensated through the computational formula and curve fitting. Experimental results show that the angle measurement performance meets the requirement for coordinate measurement. The verification platform can evaluate the uncertainty of angle measurement for the rotary-laser system efficiently.

Analysis on Potential of Electric Energy Market based on Large Industrial Consumer

NASA Astrophysics Data System (ADS)

Lin, Jingyi; Zhu, Xinzhi; Yang, Shuo; Xia, Huaijian; Yang, Di; Li, Hao; Lin, Haiying

2018-01-01

The implementation of electric energy substitution by enterprises plays an important role in promoting the development of energy conservation and emission reduction in china. In order to explore alternative energy potential of industrial enterprises, to simulate and analyze the process of industrial enterprises, identify high energy consumption process and equipment, give priority to alternative energy technologies, and determine the enterprise electric energy substitution potential predictive value, this paper constructs the evaluation model of the influence factors of the electric energy substitution potential of industrial enterprises, and uses the combined weight method to determine the weight value of the evaluation factors to calculate the target value of the electric energy substitution potential. Taking the iron and steel industry as an example, this method is used to excavate the potential. The results show that the method can effectively tap the potential of the electric power industry

Validation of an HPLC method for the quantification of ambroxol hydrochloride and benzoic acid in a syrup as pharmaceutical form stress test for stability evaluation.

PubMed

Heinänen, M; Barbas, C

2001-03-01

A method is described for ambroxol, trans-4-(2-amino-3,5-dibromobenzylamino) cyclohexanol hydrochloride, and benzoic acid separation by HPLC with UV detection at 247 nm in a syrup as pharmaceutical presentation. Optimal conditions were: Column Symmetry Shield RPC8, 5 microm 250 x 4.6 mm, and methanol/(H(3)PO(4) 8.5 mM/triethylamine pH=2.8) 40:60 v/v. Validation was performed using standards and the pharmaceutical preparation which contains the compounds described above. Results from both standards and samples show suitable validation parameters. The pharmaceutical grade substances were tested by factors that could influence the chemical stability. These reaction mixtures were analysed to evaluate the capability of the method to separate degradation products. Degradation products did not interfere with the determination of the substances tested by the assay.

A third-order approximation method for three-dimensional wheel-rail contact

NASA Astrophysics Data System (ADS)

Negretti, Daniele

2012-03-01

Multibody train analysis is used increasingly by railway operators whenever a reliable and time-efficient method to evaluate the contact between wheel and rail is needed; particularly, the wheel-rail contact is one of the most important aspects that affects a reliable and time-efficient vehicle dynamics computation. The focus of the approach proposed here is to carry out such tasks by means of online wheel-rail elastic contact detection. In order to improve efficiency and save time, a main analytical approach is used for the definition of wheel and rail surfaces as well as for contact detection, then a final numerical evaluation is used to locate contact. The final numerical procedure consists in finding the zeros of a nonlinear function in a single variable. The overall method is based on the approximation of the wheel surface, which does not influence the contact location significantly, as shown in the paper.

Evaluation of the Stress Level of Children with Idiopathic Scoliosis in relation to the Method of Treatment and Parameters of the Deformity

PubMed Central

Leszczewska, Justyna; Czaprowski, Dariusz; Pawłowska, Paulina; Kolwicz, Aleksandra; Kotwicki, Tomasz

2012-01-01

Stress level due to existing body deformity as well as to the treatment with a corrective brace is one of factors influencing the quality of life of children with idiopathic scoliosis undergoing non-surgical management. The purpose of the study was to evaluate the stress level among children suffering from idiopathic scoliosis in relation to the method of treatment and the parameters of the deformity. Seventy-three patients with idiopathic scoliosis participated in the study. Fifty-two children were treated by means of physiotherapy, while 21 patients were treated with both Cheneau corrective brace and physiotherapy. To assess the stress level related to the deformity itself and to the method of treatment with corrective brace, the two Bad Sobernheim Stress Questionnaires (BSSQs) were applied, the BSSQ Deformity and the BSSQ Brace, respectively. PMID:22919333

Evaluation of the stress level of children with idiopathic scoliosis in relation to the method of treatment and parameters of the deformity.

PubMed

Leszczewska, Justyna; Czaprowski, Dariusz; Pawłowska, Paulina; Kolwicz, Aleksandra; Kotwicki, Tomasz

2012-01-01

Stress level due to existing body deformity as well as to the treatment with a corrective brace is one of factors influencing the quality of life of children with idiopathic scoliosis undergoing non-surgical management. The purpose of the study was to evaluate the stress level among children suffering from idiopathic scoliosis in relation to the method of treatment and the parameters of the deformity. Seventy-three patients with idiopathic scoliosis participated in the study. Fifty-two children were treated by means of physiotherapy, while 21 patients were treated with both Cheneau corrective brace and physiotherapy. To assess the stress level related to the deformity itself and to the method of treatment with corrective brace, the two Bad Sobernheim Stress Questionnaires (BSSQs) were applied, the BSSQ Deformity and the BSSQ Brace, respectively.

Numerical simulation of turbulence flow in a Kaplan turbine -Evaluation on turbine performance prediction accuracy-

NASA Astrophysics Data System (ADS)

Ko, P.; Kurosawa, S.

2014-03-01

The understanding and accurate prediction of the flow behaviour related to cavitation and pressure fluctuation in a Kaplan turbine are important to the design work enhancing the turbine performance including the elongation of the operation life span and the improvement of turbine efficiency. In this paper, high accuracy turbine and cavitation performance prediction method based on entire flow passage for a Kaplan turbine is presented and evaluated. Two-phase flow field is predicted by solving Reynolds-Averaged Navier-Stokes equations expressed by volume of fluid method tracking the free surface and combined with Reynolds Stress model. The growth and collapse of cavitation bubbles are modelled by the modified Rayleigh-Plesset equation. The prediction accuracy is evaluated by comparing with the model test results of Ns 400 Kaplan model turbine. As a result that the experimentally measured data including turbine efficiency, cavitation performance, and pressure fluctuation are accurately predicted. Furthermore, the cavitation occurrence on the runner blade surface and the influence to the hydraulic loss of the flow passage are discussed. Evaluated prediction method for the turbine flow and performance is introduced to facilitate the future design and research works on Kaplan type turbine.

Sample preparation method influences direct identification of anaerobic bacteria from positive blood culture bottles using MALDI-TOF MS.

PubMed

Jeverica, Samo; Nagy, Elisabeth; Mueller-Premru, Manica; Papst, Lea

2018-05-15

Rapid detection and identification of anaerobic bacteria from blood is important to adjust antimicrobial therapy by including antibiotics with activity against anaerobic bacteria. Limited data is available about direct identification of anaerobes from positive blood culture bottles using MALDI-TOF mass spectrometry (MS). In this study, we evaluated the performance of two sample preparation protocols for direct identification of anaerobes from positive blood culture bottles, the MALDI Sepsityper kit (Sepsityper) and the in-house saponin (saponin) method. Additionally, we compared two blood culture bottle types designed to support the growth of anaerobic bacteria, the BacT/ALERT-FN Plus (FN Plus) and the BACTEC-Lytic (Lytic), and their influence on direct identification. A selection of 30 anaerobe strains belonging to 22 different anaerobic species (11 reference strains and 19 clinical isolates) were inoculated to 2 blood culture bottle types in duplicate. In total, 120 bottles were inoculated and 99.2% (n = 119) signalled growth within 5 days of incubation. The Sepsityper method correctly identified 56.3% (n = 67) of anaerobes, while the saponin method correctly identified 84.9% (n = 101) of anaerobes with at least log(score) ≥1.6 (low confidence correct identification), (p < 0.001). Gram negative anaerobes were better identified with the saponin method (100% vs. 46.5%; p < 0.001), while Gram positive anaerobes were better identified with the Sepsityper method (70.8% vs. 62.5%; p = 0.454). Average log(score) values among only those isolates that were correctly identified simultaneously by both sample preparation methods were 2.119 and 2.029 in favour of the Sepsityper method, (p = 0.019). The inoculated bottle type didn't influence the performance of the two sample preparation methods. We confirmed that direct identification from positive blood culture bottles with MALDI-TOF MS is reliable for anaerobic bacteria. However, the results are influenced by the sample preparation method used. Copyright © 2018 Elsevier Ltd. All rights reserved.

Apparatus and method for controlling plating uniformity

DOEpatents

Hachman Jr., John T.; Kelly, James J.; West, Alan C.

2004-10-12

The use of an insulating shield for improving the current distribution in an electrochemical plating bath is disclosed. Numerical analysis is used to evaluate the influence of shield shape and position on plating uniformity. Simulation results are compared to experimental data for nickel deposition from a nickel--sulfamate bath. The shield is shown to improve the average current density at a plating surface.

How Medical Students' Behaviors and Attitudes affect the Impact of a Brief Curriculum on Nutrition Counseling

ERIC Educational Resources Information Center

Schlair, Sheira; Hanley, Kathleen; Gillespie, Colleen; Disney, Lindsey; Kalet, Adina; Darby, Pamella C.; Frank, Erica; Spencer, Elsa; Harris, Jeff; Jay, Melanie

2012-01-01

Objective: To evaluate a nutrition curriculum and explore the influence of medical students' own nutrition practices on its impact. Methods: An anonymous survey was given to first-year medical students attending a required course immediately prior to and 2 weeks after a 2-hour interactive nutrition curriculum intervention in a large private urban…

Modeling temperature and moisture state effects on acoustic velocity in wood

Treesearch

Shan Gao; X. Wang; L. Wang; R.B. Bruce

2011-01-01

Previous research has proved the concept of acoustic wave propagation methods for evaluating wood quality of trees and logs during forest operations. As commercial acoustic equipment is implemented in field for various purposes, one has to consider the influence of operating temperature on acoustic velocity — a key parameter for wood property prediction. Our field...

Phoneme Restoration Methods Reveal Prosodic Influences on Syntactic Parsing: Data from Bulgarian

ERIC Educational Resources Information Center

Stoyneshka-Raleva, Iglika

2013-01-01

This dissertation introduces and evaluates a new methodology for studying aspects of human language processing and the factors to which it is sensitive. It makes use of the phoneme restoration illusion (Warren, 1970). A small portion of a spoken sentence is replaced by a burst of noise. Listeners typically mentally restore the missing phoneme(s),…

Catalytic Ketone Hydrodeoxygenation Mediated by Highly Electrophilic Phosphonium Cations.

PubMed

Mehta, Meera; Holthausen, Michael H; Mallov, Ian; Pérez, Manuel; Qu, Zheng-Wang; Grimme, Stefan; Stephan, Douglas W

2015-07-06

Ketones are efficiently deoxygenated in the presence of silane using highly electrophilic phosphonium cation (EPC) salts as catalysts, thus affording the corresponding alkane and siloxane. The influence of distinct substitution patterns on the catalytic effectiveness of several EPCs was evaluated. The deoxygenation mechanism was probed by DFT methods. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

TO "LIMITATIONS OF ROI TESTING FOR VENTING DESIGN: DESCRIPTION OF AN ALTERNATIVE APPROACH BASED ON ATTAINMENT OF A CRITICAL PORE-GAS VELOCITY IN CONTAMINATED MEDIA

EPA Science Inventory

In this paper, we describe the limitations of radius of influence (ROI) evaluation for venting design in more detail than has been done previously and propose an alternative method based on specification and attainment of critical pore-gas velocities in contaminated subsurface me...